",
- "nativeCalendarSyncAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení.",
- "nativeCalendarSyncMAMOnlyTitle": "Povolit synchronizaci kalendáře",
- "nativeCalendarSyncMAMOnlyTooltip": "Ve výchozím nastavení zásada ochrany aplikací povoluje synchronizaci kalendáře s nativní aplikací kalendáře, ale dá se použít blokování dostupnosti synchronizace kalendáře. Toto nastavení funguje nezávisle na nastavení zásady ochrany aplikací a umožňuje organizacím definovat, jestli bude synchronizace kalendáře k dispozici pro pracovní nebo školní účet.",
- "nativeCalendarSyncTitle": "Synchronizovat kalendáře",
- "nativeCalendarSyncTooltip": "Zásady ochrany aplikací ve výchozím nastavení umožňují synchronizaci kalendáře s nativní aplikací Kalendář, ale dají se použít k blokování dostupnosti synchronizace kalendáře pomocí nastavení Synchronizovat data aplikací spravovaných zásadami s nativními aplikacemi nebo doplňky. Když toto nastavení nakonfigurujete na Vypnuto, synchronizace kalendáře se zablokuje, když je nastavení Zásady ochrany aplikací nastavené na Povoleno.",
- "playMyEmailsTitle": "Přehrát moje e-maily",
- "playMyEmailsTooltip": "Funkce Přehrát moje e-maily není v aplikaci povolená ve výchozím nastavení, oprávněným uživatelům se ale nabízí prostřednictvím banneru v doručené poště. Když se tato funkce nastaví na hodnotu Vypnuto, nebude se v aplikaci oprávněným uživatelům nabízet. I tak si uživatelé můžou v aplikaci přehrávání e-mailů povolit ručně. Pokud je nastavená jako Není nakonfigurováno, je výchozí nastavení aplikace Zapnuto a funkce se bude oprávněným uživatelům nabízet.",
- "signAllEmails": "Podepisovat všechny e-maily",
- "signAllEmailsAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení Podepsat všechny e-maily.",
- "signAllEmailsTooltip": "Zadejte, jestli musí být všechny e-maily podepsané. Digitální podpis ověřuje pravost e-mailu a zajišťuje, že se během přenosu nezmění jeho obsah.",
- "syncAddressTitle": "Adresa",
- "syncAddressTooltip": "Tato hodnota určuje, jestli se adresa kontaktu má synchronizovat s nativními kontakty.",
- "syncBirthdayTitle": "Datum narození",
- "syncBirthdayTooltip": "Tato hodnota určuje, jestli se datum narození kontaktu má synchronizovat s nativními kontakty.",
- "syncCompanyTitle": "Společnost",
- "syncCompanyTooltip": "Tato hodnota určuje, jestli se název společnosti kontaktu má synchronizovat s nativními kontakty.",
- "syncDepartmentTitle": "Oddělení",
- "syncDepartmentTooltip": "Tato hodnota určuje, jestli se oddělení kontaktu má synchronizovat s nativními kontakty.",
- "syncEmailAddressTitle": "E-mailová adresa",
- "syncEmailAddressTooltip": "Tato hodnota určuje, jestli se e-mailová adresa kontaktu má synchronizovat s nativními kontakty.",
- "syncInstantMessagingAddressTitle": "Adresa pro zasílání rychlých zpráv",
- "syncInstantMessagingAddressTooltip": "Tato hodnota určuje, jestli se adresa kontaktu pro zasílání rychlých zpráv má synchronizovat s nativními kontakty.",
- "syncJobTitleTitle": "Funkce",
- "syncJobTitleTooltip": "Tato hodnota určuje, jestli se pracovní pozice kontaktu má synchronizovat s nativními kontakty.",
- "syncNicknameTitle": "Přezdívka",
- "syncNicknameTooltip": "Tato hodnota určuje, jestli se přezdívka kontaktu má synchronizovat s nativními kontakty.",
- "syncNotesTitle": "Notes",
- "syncNotesTooltip": "Tato hodnota určuje, jestli se poznámky kontaktu mají synchronizovat s nativními kontakty.",
- "syncPhoneHomeFaxNumberTitle": "Telefonní číslo faxu domů",
- "syncPhoneHomeFaxNumberTooltip": "Tato hodnota určuje, jestli se číslo faxu domů kontaktu má synchronizovat s nativními kontakty.",
- "syncPhoneHomeNumberTitle": "Telefonní číslo domů",
- "syncPhoneHomeNumberTooltip": "Tato hodnota určuje, jestli se telefonní číslo domů kontaktu má synchronizovat s nativními kontakty.",
- "syncPhoneMobileNumberTitle": "Mobilní telefonní číslo",
- "syncPhoneMobileNumberTooltip": "Tato hodnota určuje, jestli se mobilní telefonní číslo kontaktu má synchronizovat s nativními kontakty.",
- "syncPhoneOtherNumberTitle": "Jiné telefonní číslo",
- "syncPhoneOtherNumberTooltip": "Tato hodnota určuje, jestli se jiné telefonní číslo kontaktu má synchronizovat s nativními kontakty.",
- "syncPhonePagerNumberTitle": "Telefonní číslo operátoru",
- "syncPhonePagerNumberTooltip": "Tato hodnota určuje, jestli se telefonní číslo operátoru kontaktu má synchronizovat s nativními kontakty.",
- "syncPhoneWorkFaxNumberTitle": "Telefonní číslo faxu do práce",
- "syncPhoneWorkFaxNumberTooltip": "Tato hodnota určuje, jestli se číslo faxu do práce kontaktu má synchronizovat s nativními kontakty.",
- "syncPhoneWorkNumberTitle": "Telefonní číslo do práce",
- "syncPhoneWorkNumberTooltip": "Tato hodnota určuje, jestli se telefonní číslo do práce kontaktu má synchronizovat s nativními kontakty.",
- "syncPrefixTitle": "Předpona názvu",
- "syncPrefixTooltip": "Tato hodnota určuje, jestli se předpona jména kontaktu má synchronizovat s nativními kontakty.",
- "syncSuffixTitle": "Přípona názvu",
- "syncSuffixTooltip": "Tato hodnota určuje, jestli se přípona jména kontaktu má synchronizovat s nativními kontakty.",
- "textPredictionsTitle": "Predikce textu",
- "textPredictionsTooltip": "Aplikace Outlook může při psaní zpráv navrhovat slova a fráze. Když Outlook nabídne návrh, přijměte ho potáhnutím prstem. Když se nenakonfiguruje, bude ve výchozím nastavení aplikace nastavené na Zapnuté.",
- "themesEnabledTitle": "Motivy jsou povolené",
- "themesEnabledTooltip": "Určete, jestli může uživatel používat vlastní vizuální motiv."
- },
- "Languages": {
- "ar-aE": "Arabština (Spojené arabské emiráty)",
- "ar-bH": "Arabština (Bahrajn)",
- "ar-dZ": "Arabština (Alžírsko)",
- "ar-eG": "Arabština (Egypt)",
- "ar-iQ": "Arabština (Irák)",
- "ar-jO": "Arabština (Jordánsko)",
- "ar-kW": "Arabština (Kuvajt)",
- "ar-lB": "Arabština (Libanon)",
- "ar-lY": "Arabština (Libye)",
- "ar-mA": "Arabština (Maroko)",
- "ar-oM": "Arabština (Omán)",
- "ar-qA": "Arabština (Katar)",
- "ar-sA": "arabština (Saúdská Arábie)",
- "ar-sY": "Arabština (Sýrie)",
- "ar-tN": "Arabština (Tunisko)",
- "ar-yE": "Arabština (Jemen)",
- "az-cyrl": "Ázerbájdžánština (cyrilice, Ázerbájdžán)",
- "az-latn": "Ázerbájdžánština (latinka, Ázerbájdžán)",
- "bn-bD": "Bengálština (Bangladéš)",
- "bn-iN": "Bengálština (Indie)",
- "bs-cyrl": "Bosenština (cyrilice)",
- "bs-latn": "Bosenština (latinka)",
- "zh-cN": "Čínština (ČLR)",
- "zh-hK": "Čínština (Hongkong – zvláštní administrativní oblast)",
- "zh-mO": "Čínština (Macao – zvláštní administrativní oblast)",
- "zh-sG": "čínština (Singapur)",
- "zh-tW": "Čínština (Tchaj-wan)",
- "hr-bA": "Chorvatština (latinka)",
- "hr-hR": "chorvatština (Chorvatsko)",
- "nl-bE": "Nizozemština (Belgie)",
- "nl-nL": "nizozemština (Nizozemsko)",
- "en-aU": "Angličtina (Austrálie)",
- "en-bZ": "Angličtina (Belize)",
- "en-cA": "Angličtina (Kanada)",
- "en-cabn": "Angličtina (Karibská oblast)",
- "en-iE": "Angličtina (Irsko)",
- "en-iN": "Angličtina (Indie)",
- "en-jM": "Angličtina (Jamajka)",
- "en-mY": "Angličtina (Malajsie)",
- "en-nZ": "Angličtina (Nový Zéland)",
- "en-pH": "Angličtina (Filipínská republika)",
- "en-sG": "Angličtina (Singapur)",
- "en-tT": "Angličtina (Trinidad a Tobago)",
- "en-uK": "angličtina (Spojené království)",
- "en-uS": "angličtina (Spojené státy)",
- "en-zA": "Angličtina (Jihoafrická republika)",
- "en-zW": "Angličtina (Zimbabwe)",
- "fr-bE": "Francouzština (Belgie)",
- "fr-cA": "francouzština (Kanada)",
- "fr-cH": "Francouzština (Švýcarsko)",
- "fr-fR": "francouzština (Francie)",
- "fr-lU": "Francouzština (Lucembursko)",
- "fr-mC": "Francouzština (Monako)",
- "de-aT": "Němčina (Rakousko)",
- "de-cH": "Němčina (Švýcarsko)",
- "de-dE": "němčina (Německo)",
- "de-lI": "Němčina (Lichtenštejnsko)",
- "de-lU": "Němčina (Lucembursko)",
- "iu-cans": "Inuktitutština (slabičné písmo, Kanada)",
- "iu-latn": "Inuktitutština (latinka, Kanada)",
- "it-cH": "Italština (Švýcarsko)",
- "it-iT": "italština (Itálie)",
- "ms-bN": "Malajština (Sultanát Brunej)",
- "ms-mY": "Malajština (Malajsie)",
- "mn-cN": "Mongolština (tradiční mongolština, ČLR)",
- "mn-mN": "Mongolština (cyrilice, Mongolsko)",
- "no-nB": "norština, Bokmål (Norsko)",
- "no-nn": "Norština, Nynorsk (Norsko)",
- "pt-bR": "portugalština (Brazílie)",
- "pt-pT": "portugalština (Portugalsko)",
- "quz-bO": "Kečuánština (Bolívie)",
- "quz-eC": "Kečuánština (Ekvádor)",
- "quz-pE": "Kečuánština (Peru)",
- "smj-nO": "Sámština (lulejská, Norsko)",
- "smj-sE": "Sámština (lulejská, Švédsko)",
- "se-fI": "Sámština (severní, Finsko)",
- "se-nO": "Sámština (severní, Norsko)",
- "se-sE": "Sámština (severní, Švédsko)",
- "sma-nO": "Sámština (jižní, Norsko)",
- "sma-sE": "Sámština (jižní, Švédsko)",
- "smn": "Sámština (inarijská, Finsko)",
- "sms": "Sámština (skoltská, Finsko)",
- "sr-Cyrl-bA": "Srbština (cyrilice)",
- "sr-Cyrl-rS": "Srbština (cyrilice, Srbsko a Černá hora)",
- "sr-Latn-bA": "srbština (latinka)",
- "sr-Latn-rS": "srbština (latinka, Srbsko)",
- "dsb": "Dolnolužická srbština (Německo)",
- "hsb": "Hornolužická srbština (Německo)",
- "es-es-tradnl": "Španělština (Španělsko; tradiční řazení)",
- "es-aR": "Španělština (Argentina)",
- "es-bO": "Španělština (Bolívie)",
- "es-cL": "Španělština (Chile)",
- "es-cO": "Španělština (Kolumbie)",
- "es-cR": "Španělština (Kostarika)",
- "es-dO": "Španělština (Dominikánská republika)",
- "es-eC": "Španělština (Ekvádor)",
- "es-eS": "Španělština (Španělsko)",
- "es-gT": "Španělština (Guatemala)",
- "es-hN": "Španělština (Honduras)",
- "es-mX": "Španělština (Mexiko)",
- "es-nI": "Španělština (Nikaragua)",
- "es-pA": "Španělština (Panama)",
- "es-pE": "Španělština (Peru)",
- "es-pR": "Španělština (Portoriko)",
- "es-pY": "Španělština (Paraguay)",
- "es-sV": "Španělština (Salvador)",
- "es-uS": "Španělština (Spojené státy)",
- "es-uY": "Španělština (Uruguay)",
- "es-vE": "Španělština (Venezuela)",
- "sv-fI": "Švédština (Finsko)",
- "uz-cyrl": "Uzbečtina (cyrilice, Uzbekistán)",
- "uz-latn": "Uzbečtina (latinka, Uzbekistán)",
- "af": "Afrikánština (Jihoafrická republika)",
- "sq": "Albánština (Albánie)",
- "am": "Amharšina (Etiopie)",
- "hy": "Arménština (Arménie)",
- "as": "Ásámština (Indie)",
- "ba": "Baškirština (Rusko)",
- "eu": "Baskičtina (Baskičtina)",
- "be": "Běloruština (Bělorusko)",
- "br": "Bretonština (Francie)",
- "bg": "bulharština (Bulharsko)",
- "ca": "Katalánština (Katalánština)",
- "co": "Korsičtina (Francie)",
- "cs": "čeština (Česká republika)",
- "da": "dánština (Dánsko)",
- "dv": "Divehština (Maledivy)",
- "et": "estonština (Estonsko)",
- "fo": "Faerština (Faerské ostrovy)",
- "fil": "Filipínština (Filipíny)",
- "fi": "finština (Finsko)",
- "gl": "Galicijština (Galicie)",
- "ka": "Gruzínština (Gruzie)",
- "el": "Řečtina (Řecko)",
- "gu": "Gudžarátština (Indie)",
- "ha": "Hauština (latinka, Nigérie)",
- "he": "hebrejština (Izrael)",
- "hi": "Hindština (Indie)",
- "hu": "maďarština (Maďarsko)",
- "is": "Islandština (Island)",
- "ig": "Igboština (Nigérie)",
- "id": "Indonéština (Indonésie)",
- "ga": "Irština (Irsko)",
- "xh": "Isi-xhoština (Jihoafrická republika)",
- "zu": "Zuluština (Jihoafrická republika)",
- "ja": "japonština (Japonsko)",
- "kn": "Kannadština (Indie)",
- "kk": "Kazaština (Kazachstán)",
- "km": "Khmérština (Kambodža)",
- "rw": "Kiňarwandština (Rwanda)",
- "sw": "Svahilština (Keňa)",
- "kok": "Konkánština (Indie)",
- "ko": "korejština (Korea)",
- "ky": "Kyrgyzština (Kyrgyzstán)",
- "lo": "Laština (Laoská lidově demokratická republika)",
- "lv": "lotyština (Lotyšsko)",
- "lt": "litevština (Litva)",
- "lb": "Lucemburština (Lucembursko)",
- "mk": "Makedonština (Severní Makedonie)",
- "ml": "Malajálamština (Indie)",
- "mt": "Maltština (Malta)",
- "mi": "Maorština (Nový Zéland)",
- "mr": "Maráthština (Indie)",
- "moh": "Mohawkština (Mohawkové)",
- "ne": "Nepálština (Nepál)",
- "oc": "Okcitánština (Francie)",
- "or": "Udijština (Indie)",
- "ps": "Paštština (Afghánistán)",
- "fa": "Perština",
- "pl": "polština (Polsko)",
- "pa": "Paňdžábština (Indie)",
- "ro": "rumunština (Rumunsko)",
- "rm": "Rétorománština (Švýcarsko)",
- "ru": "ruština (Rusko)",
- "sa": "Sanskrt (Indie)",
- "st": "Severní sotština (Jihoafrická republika)",
- "tn": "Setswanština (Jihoafrická republika)",
- "si": "Sinhálština (Srí Lanka)",
- "sk": "slovenština (Slovensko)",
- "sl": "slovinština (Slovinsko)",
- "sv": "švédština (Švédsko)",
- "syr": "Syrština (Sýrie)",
- "tg": "Tádžičtina (cyrilice, Tádžikistán)",
- "ta": "Tamilština (Indie)",
- "tt": "Tatarština (Rusko)",
- "te": "Telugština (Indie)",
- "th": "thajština (Thajsko)",
- "bo": "Tibetština (ČLR)",
- "tr": "turečtina (Turecko)",
- "tk": "Turkménština (Turkmenistán)",
- "uk": "ukrajinština (Ukrajina)",
- "ur": "Urdština (Islámská republika Pákistán)",
- "vi": "Vietnamština (Vietnam)",
- "cy": "Velština (Spojené království)",
- "wo": "Wolofština (Senegal)",
- "ii": "Yi (ČLR)",
- "yo": "Jorubština (Nigérie)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender pro koncový bod",
- "androidDeviceOwnerApplications": "Aplikace",
- "androidDeviceOwnerPolicyMessages": "Vlastní informace o podpoře",
- "androidForWorkPassword": "Heslo zařízení",
- "appManagement": "Povolit nebo blokovat aplikace",
- "applicationGuard": "Ochrana Application Guard v programu Microsoft Defender",
- "applicationRestrictions": "Omezené aplikace",
- "applicationVisibility": "Zobrazit nebo skrýt aplikace",
- "applications": "App Store",
- "applicationsAndGames": "App Store, zobrazování dokumentů, hraní her",
- "applicationsAndGoogle": "Obchod Google Play",
- "appsAndExperience": "Aplikace a prostředí",
- "associatedDomains": "Přidružené domény",
- "autonomousSingleAppMode": "Autonomní režim jedné aplikace",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Šifrování Windows",
- "bootOptions": "Možnosti spouštění",
- "browser": "Prohlížeč",
- "builtinApps": "Integrované aplikace",
- "cameras": "Kamery",
- "cellular": "Mobilní",
- "cloudAndStorage": "Cloud a úložiště",
- "cloudPrint": "Cloudová tiskárna",
- "complianceEmailProfile": "E-mail",
- "connectedDevices": "Připojená zařízení",
- "connectivity": "Mobilní síť a připojení",
- "contentCaching": "Zachytávání obsahu",
- "controlPanelAndSettings": "Ovládací panely a nastavení",
- "credentialGuard": "Ochrana Credential Guard v programu Microsoft Defender",
- "customCompliance": "Vlastní dodržování předpisů",
- "customConfiguration": "Vlastní konfigurační profil",
- "customOMASettings": "Vlastní nastavení OMA-URI",
- "customPreferences": "Soubor preferencí",
- "dFCISecuritySettings": "Nastavení zabezpečení",
- "defender": "Antivirová ochrana v programu Microsoft Defender",
- "defenderAntivirus": "Antivirová ochrana v programu Microsoft Defender",
- "defenderExploitGuard": "Ochrana Exploit Guard v programu Microsoft Defender",
- "defenderFirewall": "Brána firewall systému Windows",
- "defenderLocalSecurityOptions": "Možnosti zabezpečení místního zařízení",
- "defenderSecurityCenter": "Centrum zabezpečení v programu Microsoft Defender",
- "deliveryOptimization": "Optimalizace doručení",
- "derivedCredentialAuthenticationConfiguration": "Odvozené přihlašovací údaje",
- "deviceExperience": "Možnosti zařízení",
- "deviceFirmwareConfigurationInterface": "Rozhraní DFCI (Device Firmware Configuration Interface)",
- "deviceGuard": "Řízení aplikací v programu Microsoft Defender",
- "deviceHealth": "Stav zařízení",
- "devicePassword": "Heslo zařízení",
- "deviceProperties": "Vlastnosti zařízení",
- "deviceRestrictions": "Obecné",
- "deviceSecurity": "Zabezpečení systému",
- "display": "Zobrazit",
- "domainJoin": "Připojení k doméně",
- "domains": "Domény",
- "edgeBrowser": "Microsoft Edge starší verze (verze 45 a starší)",
- "edgeBrowserSmartScreen": "Filtr SmartScreen v programu Microsoft Defender",
- "edgeKiosk": "Beznabídkový režim Microsoft Edge",
- "editionUpgrade": "Upgrade edice",
- "education": "Vzdělávání",
- "educationDeviceCerts": "Certifikáty zařízení",
- "educationStudentCerts": "Certifikáty studentů",
- "educationTakeATest": "Zkuste si test",
- "educationTeacherCerts": "Certifikáty učitelů",
- "emailProfile": "E-mail",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Rozšíření aplikace jednotného přihlašování",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Hry",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Sledování stavu",
- "homeScreenLayout": "Rozložení domovské obrazovky",
- "iOSWallpaper": "Tapeta",
- "importedPFX": "Importovaný certifikát PKCS",
- "iosDefenderAtp": "Microsoft Defender pro koncový bod",
- "iosKiosk": "Veřejný terminál",
- "kernelExtensions": "Rozšíření jádra",
- "keyboardAndDictionary": "Klávesnice a slovník",
- "kiosk": "Veřejný terminál",
- "kioskAndroidEnterprise": "Vyhrazená zařízení",
- "kioskConfiguration": "Veřejný terminál",
- "kioskConfigurationV2": "Veřejný terminál",
- "kioskWebBrowser": "Webový prohlížeč veřejného terminálu",
- "lockScreenMessage": "Zpráva zamykací obrazovky",
- "lockedScreenExperience": "Prostředí zamknuté obrazovky",
- "logging": "Vytváření sestav a telemetrie",
- "loginItems": "Položky přihlášení",
- "loginWindow": "Přihlašovací okno",
- "macDefenderAtp": "Microsoft Defender pro koncový bod",
- "maintenance": "Údržba",
- "malware": "Malware",
- "messaging": "Zasílání zpráv",
- "microphonesAndSpeakers": "Mikrofony a reproduktory",
- "networkBoundary": "Ohraničení sítě",
- "networkProxy": "Síťový proxy server",
- "notifications": "Oznámení aplikace",
- "pKCS": "Certifikát PKCS",
- "password": "Heslo",
- "personalProfile": "Osobní profil",
- "personalization": "Přizpůsobení",
- "policyOverride": "Přepsat zásady skupiny",
- "ports": "Porty",
- "powerSettings": "Nastavení napájení",
- "printer": "Tiskárna",
- "privacy": "Soukromí",
- "privacyPerApp": "Výjimky ze zásad ochrany osobních údajů pro jednotlivé aplikace",
- "privacyPreferences": "Předvolby ochrany osobních údajů",
- "projection": "Projekce",
- "radios": "Radiostanice",
- "sCCMCompliance": "Dodržování předpisů Configuration Manageru",
- "sCEP": "Certifikát SCEP",
- "sCEPProperties": "Certifikát SCEP",
- "sMode": "Přepínač režimů (jen Windows Insider)",
- "safari": "Safari",
- "search": "Hledat",
- "session": "Relace",
- "sharedDevice": "Sdílený iPad",
- "sharedPCAccountManager": "Sdílené víceuživatelské zařízení",
- "singleSignOn": "Jednotné přihlašování",
- "smartScreen": "Filtr SmartScreen v programu Microsoft Defender",
- "softwareUpdates": "Nastavení",
- "start": "Spustit",
- "systemExtensions": "Systémová rozšíření",
- "systemSecurity": "Zabezpečení systému",
- "trustedCert": "Důvěryhodný certifikát",
- "uEFIAccess": "Přístup k rozhraní UEFI",
- "updates": "Aktualizace",
- "userRights": "Uživatelská práva",
- "usersAndAccounts": "Uživatelé a účty",
- "vPN": "Základní síť VPN",
- "vPNApps": "Automatické připojení VPN",
- "vPNAppsAndTrafficRules": "Aplikace a pravidla přenosů",
- "vPNConditionalAccess": "Podmíněný přístup",
- "vPNConnectivity": "Možnosti připojení",
- "vPNDNSTriggers": "Nastavení DNS",
- "vPNIKEv2": "Nastavení IKEv2",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Dělené tunelové propojení",
- "vPNTrustedNetwork": "Detekce důvěryhodných sítí",
- "wakeSettings": "Nastavení probuzení",
- "webContentFilter": "Filtr webového obsahu",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender pro koncový bod",
- "windowsDefenderATP": "Microsoft Defender pro koncový bod",
- "windowsHelloForBusiness": "Windows Hello pro firmy",
- "windowsSpotlight": "Windows Spotlight",
- "wiredNetwork": "Drátová síť",
- "wireless": "Bezdrátové",
- "wirelessProjection": "Bezdrátová projekce",
- "workProfile": "Nastavení pracovního profilu",
- "workProfilePassword": "Heslo pracovního profilu",
- "xboxServices": "Služby Xbox",
- "zebraMx": "Profil MX (pouze Zebra)",
- "complianceActionsLabel": "Akce při nedodržení předpisů"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Popis"
- },
- "FeatureDeploymentSettings": {
- "header": "Nastavení nasazení funkcí"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Tato funkce nemůže downgradovat zařízení.",
- "label": "Aktualizace funkcí, která se má nasadit"
- },
- "GradualRolloutEndDate": {
- "label": "Dostupnost poslední skupiny"
- },
- "GradualRolloutInterval": {
- "label": "Počet dní mezi skupinami"
- },
- "GradualRolloutStartDate": {
- "label": "Dostupnost první skupiny"
- },
- "Name": {
- "label": "Název"
- },
- "OptionalUpdate": {
- "label": "Požadovaná nebo volitelná aktualizace"
- },
- "RolloutOptions": {
- "label": "Možnosti uvedení"
- },
- "RolloutSettings": {
- "header": "Kdy chcete aktualizaci zpřístupnit ve službě Windows Update?"
- },
- "ScopeSettings": {
- "header": "Nakonfigurujte značky oboru pro tyto zásady."
- },
- "StartDateOnlyStartDate": {
- "label": "První dostupné datum"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Zakázáno",
- "enabled": "Povoleno",
- "infoBalloonContent": "Určete, jestli se mají instalovat nejnovější aktualizace funkcí Windows 10 na zařízení, která nemají nárok na Windows 11.",
- "label": "Pokud zařízení není oprávněné používat Windows 11, nainstalujte nejnovější aktualizaci funkcí Windows 10",
- "notApplicable": "Není k dispozici",
- "summaryLabel": "Instalace Windows 10 na zařízeních, která nejsou oprávněná používat Windows 11"
- },
- "bladeTitle": "Nasazení aktualizací funkcí",
- "deploymentSettingsTitle": "Nastavení nasazení",
- "loadError": "Načítání nebylo úspěšné!",
- "windows11EULA": "Pokud vyberete pro nasazení tuto aktualizaci funkcí, vyjadřujete souhlas s tím, že při použití tohoto operačního systému na zařízení buď (1) byla v multilicenčním programu zakoupena platná licence Windows, nebo (2) jste oprávněný zástupce organizace s pravomocí přijímat jejím jménem příslušné licenční podmínky pro software společnosti Microsoft. Tyto podmínky najdete tady {0}."
- },
- "Notifications": {
- "deploymentSaved": "Nasazení {0} se uložilo.",
- "newFeatureUpdateDeploymentCreated": "Vytvořilo se nové nasazení aktualizace funkcí."
- },
- "TabName": {
- "deploymentSettings": "Nastavení nasazení",
- "groupAssignmentSettings": "Přiřazení",
- "scopeSettings": "Značky oboru"
- },
- "gradualRolloutLicenseWarning": "Tato funkce vyžaduje konkrétní licencování.",
- "gradualRolloutLicenseWarningEdit": "Tato funkce se může dál používat a konfigurovat, dokud se zásady neuloží bez výběru této funkce.",
- "licenseLearnMoreText": "Přečtěte si další informace o požadavcích a zásadách aktualizace funkcí.",
- "optionalUpdateWarning": "Možnost Volitelné je dostupná jenom pro aktualizace systému Windows 11.",
- "profileNameWarning": "Název musí být kratší než 64 znaků.",
- "specificLicensingRequired": "Některé vybrané funkce vyžadují konkrétní licencování."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Povolit používání malých písmen v PIN kódu",
- "notAllow": "Nepovolit používání malých písmen v PIN kódu",
- "requireAtLeastOne": "Vyžadovat v PIN kódu aspoň jedno malé písmeno"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Povolit používání speciálních znaků v PIN kódu",
- "notAllow": "Nepovolit používání speciálních znaků v PIN kódu",
- "requireAtLeastOne": "Vyžadovat v PIN kódu aspoň jeden speciální znak"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Povolit používání velkých písmen v PIN kódu",
- "notAllow": "Nepovolit používání velkých písmen v PIN kódu",
- "requireAtLeastOne": "Vyžadovat v PIN kódu aspoň jedno velké písmeno"
- }
+ "InstallContextType": {
+ "device": "Zařízení",
+ "deviceContext": "Kontext zařízení",
+ "user": "Uživatel",
+ "userContext": "Kontext uživatele"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "Verze aplikace",
- "dependencyName": "Název závislosti",
- "lastModifiedTime": "Čas poslední změny",
- "relationship": "Vztah",
- "replaced": "Nahrazeno",
- "searchPlaceholder": "Filtrovat podle názvu aplikace",
- "status": "Podrobnosti stavu",
- "statusDetails": "Stav",
- "supersedenceName": "Název nahrazování"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Podřízená závislost",
- "indirectSupersedence": "Nesouvisejí přímo",
- "supersedenceAncestors": "Nahrazuje se",
- "supersedenceDescendants": "Nahrazeno"
- },
- "SupersededReplaced": {
- "no": "Ne",
- "yes": "Ano"
- },
- "Tabs": {
- "chart": "Graf",
- "dependency": "Závislost",
- "label": "Zobrazit: ",
- "supersedence": "Nahrazování",
- "table": "Tabulka"
- },
- "dependencyGraphAriaLabel": "Graf závislostí aplikací",
- "supersedenceGraphAriaLabel": "Graf nahrazování aplikací"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Vyberte prosím skript zjišťování.",
- "scriptFileLabel": "Vyberte svůj skript zjišťování"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Když je tato možnost povolena, musí zařízení dodržovat předpisy podle vlastních pravidel definovaných v souboru JSON na základě vlastních dat vrácených z powershellového skriptu zjišťování.",
- "label": "Custom Compliance se v současné době nabízí ve verzi Preview. Jakmile bude obecně dostupná, můžete ji za další náklady přidat k možnostem licencování, které zahrnují Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Skript",
- "placeholder": "Kliknutím provedete výběr.",
- "searchboxPlaceholder": "Hledat podle názvu skriptu",
- "title": "Vyberte skript zjišťování"
- },
- "SummaryGrid": {
- "ariaLabel": "Souhrn vlastních pravidel dodržování předpisů"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "Pro všechny zásady dodržování předpisů se vyžaduje jedna akce bloku.",
+ "graceperiod": "Plán (dny po nedodržení)",
+ "graceperiodInfo": "Zadejte počet dnů po nedodržování předpisů, po jejichž uplynutí by měla být pro zařízení uživatele aktivována tato akce.",
+ "subtitle": "Zadejte parametry akce.",
+ "title": "Parametry akce"
+ },
+ "List": {
+ "gracePeriodDay": "{0} den po nedodržení",
+ "gracePeriodDays": "{0} dny (dnů) po nedodržení",
+ "gracePeriodHour": "Počet hodin po nedodržení předpisů: {0}",
+ "gracePeriodHours": "Počet hodin po nedodržení předpisů: {0}",
+ "gracePeriodMinute": "Počet minut po nedodržení předpisů: {0}",
+ "gracePeriodMinutes": "Počet minut po nedodržení předpisů: {0}",
+ "immediately": "Okamžitě",
+ "schedule": "Plán",
+ "scheduleInfoBalloon": "Dny po nedodržení předpisů",
+ "subtitle": "Zadejte sekvenci akcí pro zařízení nedodržující předpisy.",
+ "title": "Akce"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Ostatní",
+ "additionalRecipients": "Další příjemci (prostřednictvím e-mailu)",
+ "additionalRecipientsBladeTitle": "Vybrat další příjemce",
+ "emailAddressPrompt": "Zadejte e-mailové adresy (oddělené čárkami).",
+ "invalidEmail": "Neplatná e-mailová adresa",
+ "messageTemplate": "Šablona zprávy",
+ "noneSelected": "Nic není vybráno.",
+ "notSelected": "Nevybráno",
+ "numSelected": "Počet vybraných: {0}",
+ "selected": "Vybrané"
},
- "UploadFile": {
- "jsonFileLabel": "Nahrajte a ověřte soubor JSON s nastavením vlastního dodržování předpisů",
- "noFileSelectedError": "Vyberte prosím soubor JSON.",
- "parseFileSelectedError": "Soubor JSON není platný."
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filtr",
- "noFilters": "Žádné"
- },
- "Platform": {
- "all": "Vše",
- "android": "Správce zařízení s Androidem",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Společné",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS a Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Neznámé",
- "unsupported": "Nepodporováno",
- "windows": "Windows",
- "windows10": "Windows 10 a novější",
- "windows10CM": "Windows 10 a novější (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 a novější",
- "windows8And10": "Windows 8 a 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 a novější",
- "windows10AndWindowsServer": "Windows 10, Windows 11 a Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 a novější (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Počítač s Windows"
- },
+ "block": "Označit zařízení jako nevyhovující",
+ "lockDevice": "Uzamknout zařízení (místní akce)",
+ "lockDeviceWithPasscode": "Uzamknout zařízení (místní akce)",
+ "noAction": "Žádná akce",
+ "noActionRow": "Žádné akce. Pokud chcete přidat akci, vyberte Přidat.",
+ "pushNotification": "Poslat nabízené oznámení koncovému uživateli",
+ "remoteLock": "Vzdáleně uzamknout zařízení, které nedodržuje předpisy",
+ "removeSourceAccessProfile": "Odebrat zdrojový profil přístupu",
+ "retire": "Přidat zařízení do seznamu k vyřazení",
+ "wipe": "Vymazat",
+ "emailNotification": "Odeslat e-mail koncovému uživateli"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Skupiny správců",
+ "RoleAssignmentAdminDesc": "Uživatelé ze skupiny správců jsou správci přiřazení k této roli",
+ "rolesMenuTitle": "Role Endpoint Manager",
+ "RoleAssignmentScopeDesc": "Cílem správců v tomto přiřazení rolí můžou být zásady, aplikace a vzdálené úlohy",
+ "RoleAssignmentScope": "Skupiny oborů"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "Informace o aplikaci",
"nameForOfficeSuitApp": "Informace o sadě aplikací"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "Na Androidu můžete povolit možnost používat identifikaci na základě otisku prstu místo PIN kódu. Když uživatelé budou chtít získat přístup k této aplikaci přes svoje pracovní účty, zobrazí se jim výzva, aby poskytli svoje otisky prstů.",
- "iOS": "Na zařízeních s iOS/iPadOS můžete namísto PIN kódu povolit identifikaci pomocí otisku prstu. Při přístupu uživatelů k této aplikaci pomocí pracovního účtu se zobrazí výzva k načtení otisku prstu.",
- "mac": "Na zařízeních s Macem můžete namísto PIN kódu povolit identifikaci pomocí otisku prstu. Při přístupu uživatelů k této aplikaci pomocí pracovního účtu se zobrazí výzva k načtení otisku prstu."
- },
- "allowWidgetContentSync": "Pokud chcete aplikacím spravovaným zásadami zabránit v ukládání dat do widgetů aplikací, zvolte Blokovat. Pokud zvolíte Povolit, může aplikace spravovaná zásadami ukládat data do widgetů aplikací, pokud jsou tyto funkce podporované a povolené v aplikaci spravované zásadami. \r\n\r\n \r\n\r\nAplikace můžou poskytovat další možnosti konfigurace se zásadami konfigurace aplikací. Další informace najdete v dokumentaci k aplikaci.",
- "appSharingFromLevel1": "Pokud chcete určit, ze kterých aplikací může tato aplikace přijímat data, vyberte jednu z následujících možností:",
- "appSharingFromLevel2": "{0}: Povolí přijímat v dokumentech a účtech organizace jen data z jiných aplikací spravovaných zásadami.",
- "appSharingFromLevel3": "{0}: Povolí přijímat v dokumentech a účtech organizace data z jakékoli aplikace.",
- "appSharingFromLevel4": "{0}: Nepovolí přijímat v dokumentech a účtech organizace data z jakékoli aplikace.",
- "appSharingFromLevel5": "{0}: Povolit přenos dat z jakékoli aplikace a považovat všechna příchozí data bez identity uživatele za data organizace",
- "appSharingToLevel1": "Pokud chcete určit, kterým aplikacím může tato aplikace posílat data, vyberte jednu z následujících možností:",
- "appSharingToLevel2": "{0}: Povolí posílat data organizace jen do jiných aplikací spravovaných zásadami.",
- "appSharingToLevel3": "{0}: Povolí posílat data organizace do jakékoli aplikace.",
- "appSharingToLevel4": "{0}: Nepovolí posílat data organizace do žádné aplikace.",
- "appSharingToLevel5": "{0}: Povolit přenos jen do jiných aplikací spravovaných zásadami a přenos souborů do ostatních aplikací spravovaných pomocí MDM na registrovaných zařízeních",
- "appSharingToLevel6": "{0}: Povolit přenos jen do jiných aplikací spravovaných zásadami a filtrovat dialogy operačního systému pro otevření v určité aplikaci nebo pro sdílení tak, aby zobrazovaly jen aplikace spravované zásadami",
- "assignmentFilterEdit1": "Pokud u této zásady použijete filtry přiřazení, použije se na stránce „Aplikace“ kromě hodnot zadaných pro „Cílit na aplikace na všech typech zařízení“ a „Typy zařízení“ také vlastnost „Typ správy zařízení“.",
- "assignmentFilterEdit2": "Další informace o přiřazování zásad ochrany aplikací.",
- "conditionalEncryption1": "Vyberte {0}, pokud chcete zakázat šifrování aplikací pro interní úložiště aplikací, když se na zaregistrovaném zařízení zjistí šifrování zařízení.",
- "conditionalEncryption2": "Poznámka: Intune může detekovat pouze registraci zařízení pomocí Intune MDM. Externí úložiště aplikací se bude i nadále šifrovat, aby se zajistilo, že k datům nebudou mít přístup nespravované aplikace.",
- "contactSyncMac": "Když se tato možnost zakáže, aplikace nebudou moct ukládat kontakty do nativního adresáře.",
- "contactsSync": "Pokud chcete zabránit aplikacím spravovaným zásadami ukládat data do nativních aplikací na zařízeních (jako jsou Kontakty, Kalendář a widgety) nebo pokud chcete zabránit používání doplňků v aplikacích spravovaných zásadami, zvolte Blokovat. Pokud zvolíte Povolit, může aplikace spravovaná zásadami ukládat data do nativních aplikací nebo používat doplňky, pokud jsou tyto funkce v aplikaci spravované zásadami podporovány a povoleny.
Aplikace můžou poskytovat další možnosti konfigurace pomocí zásad pro konfiguraci aplikací. Další informace najdete v dokumentaci k aplikaci.",
- "deviceTypeTargetingCreate1": "Cílení na typ zařízení se přesunulo do kroku Přiřazení ve vytváření zásad.",
- "deviceTypeTargetingEdit1": "Pokud u této zásady použijete filtry přiřazení, použije se na stránce „Aplikace“ kromě hodnot zadaných pro „Cílit na aplikace na všech typech zařízení“ a „Typy zařízení“ také vlastnost „Typ správy zařízení“.",
- "deviceTypeTargetingEdit2": "Pokud chcete upravit cílení na typ správy zařízení, resetujte možnost „Cílit na aplikace na všech typech zařízení“ = „Ano“. Pak vytvořte filtr přiřazení MAM s požadovanými hodnotami pro „Typ správy zařízení“.",
- "deviceTypeTargetingHasMoved": "Další informace o přiřazování zásad ochrany aplikací",
- "encryptionAndroid1": "U aplikací přidružených k zásadě správy mobilních aplikací Intune poskytuje šifrování společnost Microsoft. Data se šifrují synchronně během V/V operací se soubory podle nastavení v zásadě správy mobilních aplikací. Spravované aplikace na Androidu používají šifrování AES-128 v režimu CBC s využitím kryptografických knihoven platformy. Metoda šifrování nedodržuje standard FIPS 140-2. Šifrování SHA-256 se podporuje jako explicitní příkaz prostřednictvím parametru SigAlg a je funkční jenom na zařízeních 4.2 a novějších. Obsah v úložišti zařízení se šifruje vždy.",
- "encryptionAndroid2": "Pokud ve vaší zásadě aplikace vyžadujete šifrování, musí koncový uživatel nastavit a používat PIN kód pro přístup k zařízení. Pokud není PIN kód pro přístup k zařízení nastavený, aplikace se nespustí a koncovému uživateli se místo toho zobrazí zpráva s informacemi o tom, že jeho společnost vyžaduje, aby pro přístup k dané aplikaci nejprve povolil PIN kód zařízení.",
- "encryptionMac1": "U aplikací přidružených k zásadě správy mobilních aplikací Intune poskytuje šifrování společnost Microsoft. Data se šifrují synchronně během V/V operací se soubory podle nastavení v zásadě správy mobilních aplikací. Spravované aplikace na Macu používají šifrování AES-128 v režimu CBC s využitím kryptografických knihoven platformy. Metoda šifrování nedodržuje standard FIPS 140-2. Šifrování SHA-256 se podporuje jako explicitní příkaz prostřednictvím parametru SigAlg a je funkční jenom na zařízeních 4.2 a novějších. Obsah v úložišti zařízení se šifruje vždy.",
- "faceId1": "Tam, kde je to možné, můžete povolit, aby se místo PIN kódu používala identifikace tváře. Až uživatelé budou přistupovat k této aplikaci a svým pracovním účtům, zobrazí se jim výzva, aby poskytli identifikaci tváře.",
- "faceId2": "Pokud chcete pro přístup k aplikaci povolit identifikaci tváře namísto PIN kódu, vyberte Ano.",
- "managementLevelsAndroid1": "Pomocí této možnosti můžete zadat, jestli tyto zásady platí pro zařízení správce zařízení s Androidem, zařízení s Android Enterprise nebo pro nespravovaná zařízení.",
- "managementLevelsAndroid2": "{0}: Nespravovaná zařízení jsou zařízení, na kterých se nezjistila správa Intune MDM. Do toho patří i dodavatelé MDM třetích stran.",
- "managementLevelsAndroid3": "{0}: Zařízení spravovaná v Intune používající rozhraní API pro správu zařízení s Androidem.",
- "managementLevelsAndroid4": "{0}: Zařízení spravovaná v Intune používající pracovní profily Android Enterprise nebo úplnou správu zařízení Android Enterprise.",
- "managementLevelsIos1": "Pomocí této možnosti můžete zadat, jestli tyto zásady platí pro spravovaná zařízení MDM, nebo pro nespravovaná zařízení.",
- "managementLevelsIos2": "{0}: Nespravovaná zařízení jsou zařízení, na kterých se nezjistila správa Intune MDM. Do toho patří i dodavatelé MDM třetích stran.",
- "managementLevelsIos3": "{0}: Spravovaná zařízení se spravují pomocí Intune MDM.",
- "minAppVersion": "Definujte číslo minimální požadované verze aplikace, kterou by uživatel měl používat, aby získal k aplikaci zabezpečený přístup.",
- "minAppVersionWarning": "Definujte číslo minimální doporučené verze aplikace, kterou by uživatel měl používat pro zabezpečený přístup k aplikaci.",
- "minOsVersion": "Definujte číslo minimální požadované verze operačního systému, kterou by uživatel měl používat, aby získal k aplikaci zabezpečený přístup.",
- "minOsVersionWarning": "Definujte číslo minimální doporučené verze operačního systému, kterou by uživatel měl používat, aby získal k aplikaci zabezpečený přístup.",
- "minPatchVersion": "Definujte nejstarší požadovanou úroveň opravy zabezpečení Androidu, kterou uživatel může mít, aby mohl získat zabezpečený přístup k aplikaci.",
- "minPatchVersionWarning": "Definujte nejstarší doporučenou úroveň opravy zabezpečení Androidu, kterou uživatel může mít, aby měl zabezpečený přístup k aplikaci.",
- "minSdkVersion": "Definujte minimální požadovanou verzi sady Intune Application Protection Policy SDK, kterou by uživatel měl používat, aby získal k aplikaci zabezpečený přístup.",
- "requireAppPinDefault": "
Pokud chcete zakázat PIN kód aplikace, když se na zaregistrovaném zařízení zjistí zámek, vyberte Ano.
",
- "targetAllApps1": "Pomocí této možnosti můžete své zásady zacílit na aplikace a zařízení v jakémkoli stavu správy.",
- "targetAllApps2": "Pokud má uživatel zásady, které cílí na konkrétní stav správy, toto nastavení se při řešení konfliktů zásad nahradí.",
- "touchId2": "Pokud chcete, aby se pro přístup k aplikaci místo PIN kódu vyžadovala identifikace pomocí otisku prstu, zvolte {0}."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Zadejte počet dní, který musí uplynout, než bude potřeba, aby uživatel PIN kód resetoval.",
- "previousPinBlockCount": "Toto nastavení určuje počet předchozích kódů PIN, které Intune zachová. Všechny nové PIN kódy se musí lišit od těch, které Intune zachovává."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Tato možnost umožní službě Windows Search nadále hledat v šifrovaných datech.",
- "authoritativeIpRanges": "Toto nastavení povolte, pokud chcete přepsat automatické zjišťování rozsahů IP adres ve Windows.",
- "authoritativeProxyServers": "Toto nastavení povolte, pokud chcete přepsat automatické zjišťování rozsahů proxy serverů ve Windows.",
- "checkInput": "Zkontrolovat platnost vstupu",
- "dataRecoveryCert": "Certifikát pro obnovení je speciální certifikát systému souborů EFS (Encrypting File System), který můžete použít k obnovení šifrovaných souborů v případě, že se ztratí nebo poškodí váš šifrovací klíč. Potřebujete k tomu vytvořit certifikát pro obnovení a zadat ho tady. Další informace najdete tady.",
- "enterpriseCloudResources": "
Zadejte cloudové prostředky, které se budou považovat za firemní a budou se chránit pomocí zásad Windows Information Protection. Pokud chcete zadat více prostředků, oddělte jednotlivé záznamy znakem |.
Pokud máte ve společnosti nakonfigurované proxy, můžete zadat proxy server, přes který se bude směrovat provoz k vámi zadaným cloudovým prostředkům.
URL[,Proxy]|URL[,Proxy]
Bez proxy: contoso.sharepoint.com|contoso.visualstudio.com S proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Zadejte rozsahy IPv4, které tvoří vaši firemní síť. Tyto rozsahy spolu s názvy podnikových síťových domén, které zadáte, definují ohraničení firemní sítě.
Toto nastavení vyžaduje, aby byla povolená služba Windows Information Protection.
Pokud chcete zadat více záznamů, oddělejte jednotlivé záznamy čárkou.
Zadejte rozsahy IPv6, které tvoří vaši firemní síť. Tyto rozsahy spolu s názvy podnikových síťových domén, které zadáte, definují ohraničení firemní sítě.
Pokud chcete zadat více záznamů, oddělte jednotlivé záznamy čárkou.
Pokud máte ve společnosti nakonfigurované proxy, můžete zadat proxy server, přes který se bude směrovat provoz ke cloudovým prostředkům zadaným v nastaveních podnikových cloudových prostředků.
Pokud potřebujete zadat více hodnot, oddělte jednotlivé záznamy středníkem.
Zadejte názvy DNS, které utváří vaši firemní síť. Spolu se zadanými rozsahy IP adres definují ohraničení firemní sítě. Pokud potřebujete zadat více hodnot, oddělte jednotlivé záznamy čárkou.
Toto nastavení vyžaduje, aby byla povolená služba Windows Information Protection.
Příklad: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Zadejte názvy DNS, které tvoří vaši firemní síť. Pomocí nich a rozsahů IP adres, které zadáte, se definují hranice vaší firemní sítě. Pokud potřebujete zadat více hodnot, oddělte jednotlivé položky znakem |.
Toto nastavení se vyžaduje, aby se mohla povolit funkce Windows Information Protection.
Příklad: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
Pokud máte v podnikové síti externí proxy servery, zadejte je sem. Když zadáváte adresu proxy serveru, měli byste zadat také port, přes který bude probíhat přenos a ochrana prostřednictvím Windows Information Protection.
Poznámka: Tento seznam nesmí zahrnovat servery uvedené v seznamu podnikových interních proxy serverů. Pokud potřebujete zadat více hodnot, oddělte jednotlivé záznamy středníkem.
",
- "maxInactivityTime1": "Určuje maximální dobu (v minutách), po kterou může zařízení zůstat neaktivní, než se zamkne PIN kódem nebo heslem. Uživatelé si můžou vybrat jakoukoli hodnotu vypršení časového limit menší než maximální doba zadaná v aplikaci Nastavení. Poznámka: Lumia 950 a 950XL mají maximální hodnotu časového limitu 5 minut bez ohledu na hodnotu, kterou určují tyto zásady.",
- "maxInactivityTime2": "0 (výchozí) – Není definovaný žádný časový limit. Výchozí hodnota 0 se interpretuje tak, že není definovaný žádný časový limit.",
- "maxPasswordAttempts1": "Tyto zásady se chovají jinak na mobilním a jinak na desktopovém zařízení.",
- "maxPasswordAttempts2": "Když uživatel dosáhne hodnoty nastavené v těchto zásadách na mobilním zařízení, zařízení se vymaže.",
- "maxPasswordAttempts3": "Když uživatel dosáhne hodnoty nastavené v těchto zásadách na stolním počítači, počítač se nevymaže. Místo toho se počítač převede do režimu obnovení BitLockeru, který sice znepřístupní data, ale je možné je obnovit. Pokud se nezapne BitLocker, zásady se nedají vynutit.",
- "maxPasswordAttempts4": "Než uživatel dosáhne limitu neúspěšných pokusů, pošle se mu na zamykací obrazovku upozornění, že další neúspěšné pokusy uzamknou jeho počítač. Jakmile uživatel limitu dosáhne, zařízení se automaticky restartuje a zobrazí stránku obnovení BitLockeru. Tato stránka uživatele vyzve k zadání obnovovacího klíče BitLockeru.",
- "maxPasswordAttempts5": "0 (výchozí) – Zařízení se po zadání nesprávného PIN kódu nebo hesla nikdy nevymaže.",
- "maxPasswordAttempts6": "Pokud jsou všechny hodnoty zásad = 0, je nejbezpečnější hodnotou 0. Jinak je nejbezpečnější hodnotou zásad Min.",
- "mdmDiscoveryUrl": "Zadejte adresu URL pro koncový bod registrace MDM, který budou používat uživatelé registrující se do MDM. Tato hodnota se standardně zadává pro Intune.",
- "minimumPinLength1": "Celočíselná hodnota, která nastavuje minimální počet znaků vyžadovaných pro PIN kód. Výchozí hodnota je 4. Nejnižší počet, který pro toto nastavení zásad můžete nakonfigurovat, je 4. Největší hodnota, kterou můžete nakonfigurovat, musí být menší než 127 nebo číslo nakonfigurované v nastavení zásady Maximální délka PIN kódu, podle toho, co je menší.",
- "minimumPinLength2": "Pokud nakonfigurujete toto nastavení zásad, délka PIN kódu musí být větší nebo rovna tomuto číslu. Pokud toto nastavení zásad zakážete nebo nenakonfigurujete, délka PIN kódu musí být větší nebo rovna 4.",
- "name": "Název tohoto ohraničení sítě",
- "neutralResources": "
Pokud máte ve společnosti koncové body pro přesměrování ověřování, zadejte je sem. Umístění, která se tady zadají, se považují buď za osobní, nebo za podniková. Záleží to na kontextu připojení před přesměrováním.
Pokud potřebujete zadat více hodnot, oddělte jednotlivé záznamy čárkou.
Příklad: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Hodnota, která nastavuje Windows Hello pro firmy jako metodu přihlašování do Windows",
- "passportForWork2": "Výchozí hodnota je true. Pokud tyto zásady nastavíte na false, uživatel nemůže zřídit Windows Hello pro firmy. Výjimkou jsou mobilní telefony připojené k Microsoft Entra, u kterých je zřízení povinné.",
- "pinExpiration": "Největší hodnota, kterou můžete pro toto nastavení zásad nastavit, je 730. Nejmenší hodnota, kterou můžete pro toto nastavení zásad nastavit, je 0. Pokud tyto zásady nastavíte na 0, platnost PIN kódu uživatele nikdy nevyprší.",
- "pinHistory1": "Největší hodnota, kterou můžete pro toto nastavení zásad nastavit, je 50. Nejmenší hodnota, kterou můžete pro toto nastavení zásad nastavit, je 0. Pokud tyto zásady nastavíte na 0, ukládání předchozích PIN kódů se nebude vyžadovat.",
- "pinHistory2": "Aktuální PIN kód uživatele je součástí sady PIN kódů přidružených k uživatelskému účtu. Když se PIN kód resetuje, historie PIN kódů se nezachová.",
- "protectUnderLock": "Chrání obsah aplikací, když je zařízení zamknuté.",
- "protectionModeBlock": "
Zablokovat: Znemožňuje, aby podniková data opustila chráněné aplikace.
",
- "protectionModeOff": "
Vypnuto: Uživatel může přemístit data mimo chráněné aplikace. Neprotokolují se žádné akce.
",
- "protectionModeOverride": "
Povolit potlačení: Když se uživatel pokusí přemístit data z chráněné do nechráněné aplikace, zobrazí se mu dotaz. Pokud se rozhodne tento dotaz potlačit, akce se zaznamená do protokolu.
",
- "protectionModeSilent": "
Tiché: Uživatelé můžou přemístit data mimo chráněné aplikace. Tyto akce se protokolují.
",
- "required": "Požadováno",
- "revokeOnMdmHandoff": "Přidáno ve Windows 10, verze 1703. Tato zásada řídí, jestli se mají odvolat klíče ochrany WIP při upgradu zařízení z MAM na MDM. Pokud je nastavená na Vypnuto, klíče se neodvolají a uživatel bude mít po upgradu dál přístup k chráněným souborům. Takové nastavení se doporučuje, když je služba MDM nakonfigurovaná se stejným EnterpriseID ochrany WIP jako služba MAM.",
- "revokeOnUnenroll": "Tato možnost způsobí odvolání šifrovacích klíčů, když zařízení zruší svoji registraci k těmto zásadám.",
- "rmsTemplateForEdp": "Identifikátor TemplateID GUID, který se použije k šifrování RMS. Šablona Azure RMS umožňuje správci IT konfigurovat podrobnosti o tom, kdo a jak dlouho má přístup k souboru chráněnému pomocí RMS.",
- "showWipIcon": "Tato možnost dá uživateli pomocí překryvné ikony vědět, že jedná v kontextu podniku.",
- "useRmsForWip": "Určuje, jestli se má pro WIP povolit šifrování Azure RMS."
- },
- "requireAppPin": "
Pokud chcete zakázat PIN kód aplikace, když se na zaregistrovaném zařízení zjistí zámek, vyberte Ano.
Poznámka: Na iOS/iPadOS nemůže Intune zjišťovat registraci zařízení pomocí řešení EMM třetí strany.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "Instalace aplikace může vynutit restartování zařízení",
- "basedOnReturnCode": "Určete chování na základě návratových kódů",
- "force": "Intune vynutí povinné restartování zařízení",
- "suppress": "Žádná konkrétní akce"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Požadovaná doba instalace (minuty)",
- "maxRunTimeInMinutesToolTip": "Počet minut, po které bude systém čekat na dokončení instalačního programu. Výchozí hodnota je 60 minut."
- },
- "RunAsAccountOptions": {
- "system": "Systém",
- "user": "Uživatel"
- },
- "availableUninstall": "Povolit dostupnou odinstalaci",
- "availableUninstallTooltip": "Pokud chcete uživatelům z Portálu společnosti poskytnout možnost odinstalace této aplikace, vyberte Ano. Pokud chcete uživatelům zabránit v odinstalaci aplikace z Portálu společnosti, vyberte Ne.",
- "bladeTitle": "Program",
- "deviceRestartBehavior": "Chování zařízení při restartu",
- "deviceRestartBehaviorTooltip": "Vyberte chování restartování zařízení po úspěšné instalaci aplikace. Pokud chcete zařízení restartovat podle nastavení konfigurace návratových kódů, vyberte Určit chování na základě návratových kódů. Pokud chcete restartování zařízení během instalace aplikací založených na Instalační službě MSI potlačit, vyberte Žádná konkrétní akce. Možnost Instalace aplikace může vynutit restartování zařízení zvolte, pokud chcete, aby se instalace aplikace dokončila bez potlačování restartování. Když se vybere možnost Intune vynutí povinné restartování zařízení, zařízení se po úspěšné instalaci aplikace restartuje vždy.",
- "header": "Zadejte příkazy, pomocí kterých se tato aplikace nainstaluje a odinstaluje:",
- "installCommand": "Příkaz pro instalaci",
- "installCommandMaxLengthErrorMessage": "Příkaz Instalovat nesmí překročit maximální povolenou délku 1024 znaků.",
- "installCommandTooltip": "Celý instalační příkazový řádek, pomocí kterého se tato aplikace instaluje",
- "runAs32Bit": "Na 64bitových klientech spouštět příkazy k instalaci a odinstalaci v 32bitových procesech",
- "runAs32BitTooltip": "Pokud chcete na 64bitových klientech instalovat a odinstalovávat aplikaci v 32bitovém procesu, vyberte Ano. Pokud na těchto klientech chcete aplikaci instalovat a odinstalovávat v 64bitovém procesu, vyberte Ne (výchozí). 32bitoví klienti budou vždy používat 32bitový proces.",
- "runAsAccount": "Chování při instalaci",
- "runAsAccountTooltip": "Pokud chcete v případě, že se to podporuje, tuto aplikaci nainstalovat pro všechny uživatele, vyberte Systém. Pokud ji chcete nainstalovat pro uživatele, který je na zařízení přihlášený, vyberte Uživatel. U aplikací Instalační služby MSI s dvojím využitím změny znemožní úspěšné dokončení aktualizací a odinstalací, dokud se neobnoví hodnota použitá na zařízení při původní instalaci.",
- "selectorLabel": "Program",
- "uninstallCommand": "Příkaz pro odinstalaci",
- "uninstallCommandTooltip": "Celý odinstalační příkazový řádek, pomocí kterého se tato aplikace odinstaluje"
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Vytvořit nový",
- "createNewResourceAccountInfo": "
\r\nVytvořte během registrace nový účet prostředku. Účet prostředku se hned přidá do tabulky účtů prostředků, ale dokud se zařízení nezaregistruje a neověří se předplatné Surface Hubu, nebude aktivní. Další informace o účtech prostředků
\r\n ",
- "createNewResourceTitle": "Vytvořit nový účet prostředku",
- "deviceNameInvalid": "Název zařízení nemá platný formát.",
- "deviceNameRequired": "Název zařízení je povinný.",
- "editResourceAccountLabel": "Upravit",
- "selectExistingCommandMenu": "Vybrat existující"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "Názvy musí mít nanejvýš 15 znaků a můžou obsahovat písmena (a–z, A–Z), číslice (0–9) a spojovníky. Názvy se nesmí skládat jen z číslic a nemohou obsahovat mezery."
- },
- "Header": {
- "addressableUserName": "Popisný název uživatele",
- "azureADDevice": "Přidružené zařízení Microsoft Entra",
- "batch": "Značka skupiny",
- "dateAssigned": "Datum přiřazení",
- "deviceAccountPwd": "Heslo účtu zařízení",
- "deviceAccountUpn": "Účet zařízení",
- "deviceDisplayName": "Název zařízení",
- "deviceFriendlyName": "Popisný název zařízení",
- "deviceName": "Název zařízení",
- "deviceUseType": "Typ využití zařízení",
- "enrollmentState": "Stav registrace",
- "intuneDevice": "Přidružené zařízení Intune",
- "lastContacted": "Naposledy kontaktováno",
- "make": "Výrobce",
- "model": "Model",
- "profile": "Přiřazený profil",
- "profileStatus": "Stav profilu",
- "purchaseOrderId": "Nákupní objednávka",
- "resourceAccount": "Účet prostředku",
- "serialNumber": "Sériové číslo",
- "userPrincipalName": "Uživatel"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Popisný název je povinný.",
- "pwdRequired": "Heslo je povinné.",
- "pwdValidFormat": "Heslo se nepovedlo aktualizovat. Hodnota zadaná pro nové heslo nesplňuje požadavky domény na délku nebo složitost.",
- "upnRequired": "Účet zařízení je povinný.",
- "upnValidFormat": "Hodnoty můžou obsahovat písmena (a–z, A–Z), číslice (0–9) a spojovníky. Hodnoty nesmí obsahovat mezeru."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Schůzka a prezentace",
- "teamCollaboration": "Spolupráce týmů"
- },
- "Devices": {
- "featureDescription": "Windows Autopilot umožňuje přizpůsobit pro vaše uživatele software spouštěný při prvním zapnutí (OOBE).",
- "importErrorStatus": "Některá zařízení se neimportovala. Pro další informace klikněte sem.",
- "importPendingStatus": "Probíhá import. Uplynulý čas: {0} min. Tento proces může trvat až {1} min."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Hybridně připojené k Microsoft Entra",
- "activeDirectoryADLabel": "Hybridní připojení Microsoft Entra s Autopilotem",
- "azureAD": "Připojeno k Microsoft Entra",
- "unknownType": "Neznámý typ"
- },
- "Filter": {
- "enrollmentState": "Stav",
- "profile": "Stav profilu"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "Uživatelsky přívětivý název nemůže být prázdný."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Pokud chcete do svých zařízení během registrace přidávat názvy, vytvořte šablonu pro vytváření názvů.",
- "label": "Použít šablonu názvu zařízení"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "U profilů nasazení Autopilotu hybridně připojených k Microsoft Entra se zařízení pojmenují pomocí nastavení zadaných v konfiguraci připojení k doméně."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MyCompany-%RAND:4%",
- "label": "Zadat název",
- "noDisallowedChars": "Název může obsahovat jen alfanumerické znaky, spojovníky, %SERIAL% nebo %RAND:x%.",
- "serialLength": "U %SERIAL% se nedá použít více než 7 znaků.",
- "validateLessThan15Chars": "Název musí obsahovat nanejvýš 15 znaků.",
- "validateNoSpaces": "Názvy počítačů nemůžou obsahovat mezery.",
- "validateNotAllNumbers": "Název musí navíc obsahovat písmena nebo spojovníky.",
- "validateNotEmpty": "Název nesmí být prázdný.",
- "validateOnlyOneMacro": "Název musí obsahovat buď %SERIAL%, nebo %RAND:x%, ne obojí."
+ "ScopeTypes": {
+ "allDevices": "Všechna zařízení",
+ "allUsers": "Všichni uživatelé",
+ "allUsersAndDevices": "Všichni uživatelé a všechna zařízení",
+ "selectedGroups": "Vybrané skupiny"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Popis",
+ "placeholder": "Zadejte popis"
+ },
+ "NameTextBox": {
+ "label": "Název",
+ "placeholder": "Zadat název"
+ },
+ "PublisherTextBox": {
+ "label": "Vydavatel",
+ "placeholder": "Zadat vydavatele"
+ },
+ "VersionTextBox": {
+ "label": "Verze"
+ },
+ "headerDescription": "Vytvořte nový vlastní balíček skriptu ze skriptů detekce a nápravy, které jste napsali."
},
- "ConfigureComputerNameTemplate": {
- "description": "Vytvořte jedinečný název pro zařízení. Názvy musí mít nanejvýš 15 znaků, můžou obsahovat písmena (a–z, A–Z), číslice (0–9) a spojovníky. Názvy se nesmí skládat jen z číslic ani obsahovat mezeru. Pokud chcete přidat sériové číslo specifické pro daný hardware, použijte makro %SERIAL%. Kromě toho můžete použít makro %RAND:x%, které přidá náhodný řetězec číslic. Písmeno x je počet číslic, které se mají přidat."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Pokud chcete zaregistrovat zařízení a zřídit všechny aplikace a nastavení v kontextu systému, povolte možnost stisknout 5krát tlačítko Windows, aby se spustil software spouštěný při prvním zapnutí počítače. Aplikace a nastavení v kontextu uživatele se nainstalují, až se uživatel přihlásí.",
- "label": "Povolit předem zřízené nasazení"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Tok hybridního připojení Microsoft Entra k Autopilotu bude pokračovat i v případě, že během spuštění OOBE nevytvoří připojení řadiče domény.",
- "label": "Přeskočit kontrolu připojení AD"
- },
- "accountType": "Typ uživatelského účtu",
- "accountTypeInfo": "Určete, jestli jsou uživatelé na zařízení správci nebo standardní uživatelé. Upozorňujeme, že toto nastavení se nevztahuje na účty globálního správce ani správce společnosti. Tyto účty nemůžou být standardními uživateli, protože mají přístup ke všem funkcím pro správu v Microsoft Entra ID.",
- "configOOBEInfo": "
\r\nNakonfigurujte software spouštěný při prvním zapnutí zařízení Autopilot.\r\n
",
- "configureDevice": "Režim nasazení",
- "configureDeviceHintForSurfaceHub2": "Autopilot podporuje režim automatického nasazení jen pro Surface Hub 2. Tento režim nepřidružuje uživatele k registrovanému zařízení, proto nevyžaduje jeho přihlašovací údaje.",
- "configureDeviceHintForWindowsPC": "
\r\n Režim nasazení určuje, jestli uživatel musí pro zřízení zařízení zadat přihlašovací údaje.\r\n
\r\n
\r\n
\r\n Řízení uživatelem: Zařízení se přidruží k uživateli, který zařízení registruje, a při zřizování zařízení se musí zadat přihlašovací údaje uživatele.\r\n
\r\n
\r\n Nasazení sebou samým (Preview): Zařízení nejsou přidružená k uživateli, který je registruje, a při zřizování zařízení se nevyžadují přihlašovací údaje uživatele.\r\n
\r\n
",
- "createSurfaceHub2Info": "Nakonfigurujte nastavení registrace Autopilot pro zařízení Surface Hub 2. Standardně Autopilot umožňuje v prostředí prvního spuštění počítače přeskočit ověřování uživatelů. Další informace o Windows Autopilotu pro Surface Hub 2",
- "createWindowsPCInfo": "\r\n
\r\nPro zařízení Autopilot v režimu automatického nasazení se automaticky povolí následující možnosti:\r\n
\r\n
\r\n
\r\n Přeskočit výběr pracovního nebo domácího využití\r\n
\r\n
\r\n Přeskočit registraci OEM a konfiguraci OneDrivu\r\n
\r\n
\r\n Přeskočit ověřování uživatelů v prostředí prvního spuštění počítače\r\n
\r\n
",
- "endUserDevice": "Řízení uživatelem",
- "hideEscapeLink": "Skrýt možnosti změny účtu",
- "hideEscapeLinkInfo": "Možnosti změnit účet a začít znovu s jiným účtem se zobrazují během počáteční instalace zařízení na přihlašovací stránce společnosti a na chybové stránce domény. Pokud chcete tyto možnosti skrýt, musíte v Microsoft Entra ID nakonfigurovat branding společnosti (vyžaduje Windows 10 verze 1809 nebo novější nebo Windows 11).",
- "info": "Nastavení profilu AutoPilot definují prostředí, které uživatelé uvidí, když poprvé spustí Windows. ",
- "language": "Jazyk (oblast)",
- "languageInfo": "Zadejte jazyk a oblast, které se použijí.",
- "licenseAgreement": "Licenční podmínky pro software společnosti Microsoft",
- "licenseAgreementInfo": "Zadejte, jestli se uživatelům má zobrazovat smlouva EULA.",
- "plugAndForgetDevice": "Automatické nasazení",
- "privacySettingWarning": "Pro zařízení s Windows 10 verze 1903 a novější nebo s Windows 11 se změnila výchozí hodnota pro shromažďování diagnostických dat. ",
- "privacySettings": "Nastavení soukromí",
- "privacySettingsInfo": "Zadejte, jestli se uživatelům mají zobrazovat nastavení ochrany osobních údajů.",
- "showCortanaConfigurationPage": "Konfigurace Cortany",
- "showCortanaConfigurationPageInfo": "Možnost Zobrazit umožní, aby se během spuštění představila konfigurace Cortany.",
- "skipEULAWarning": "Důležité informace o skrývání licenčních podmínek",
- "skipKeyboardSelection": "Automaticky nakonfigurovat klávesnici",
- "skipKeyboardSelectionInfo": "Když se tato možnost nastaví na true a bude nastavený jazyk, přeskočí se stránka pro výběr klávesnice.",
- "subtitle": "Profily AutoPilot",
- "title": "Software spouštěný při prvním zapnutí zařízení",
- "useOSDefaultLanguage": "Výchozí nastavení operačního systému",
- "userSelect": "Výběr uživatele"
- },
- "Sync": {
- "lastRequestedLabel": "Poslední žádost o synchronizaci",
- "lastSuccessfulLabel": "Poslední úspěšná synchronizace",
- "syncInProgress": "Probíhá synchronizace. Vraťte se prosím za chvíli.",
- "syncInitiated": "Synchronizace nastavení AutoPilot byla zahájena.",
- "syncSettingsTitle": "Synchronizovat nastavení AutoPilot"
- },
- "Title": {
- "devices": "Zařízení Windows AutoPilot"
- },
- "Tooltips": {
- "addressableUserName": "Uvítací název, který se zobrazí při instalaci zařízení",
- "azureADDevice": "Přejděte na podrobnosti přidruženého zařízení. Hodnota N/A znamená, že žádné přidružené zařízení neexistuje.",
- "batch": "Řetězcový atribut, pomocí kterého se dá identifikovat skupina zařízení. Pole značky skupiny Intune se mapuje na atribut OrderID v zařízeních Microsoft Entra.",
- "dateAssigned": "Časové razítko, kdy se profil přiřadil k zařízení",
- "deviceAccountPwd": "Heslo účtu zařízení pro zařízení Surface Hub. Pokud ho zadáte, vyplňte také účet zařízení a popisný název.",
- "deviceAccountUpn": "E-mail účtu zařízení pro zařízení Surface Hub. Pokud ho zadáte, vyplňte také heslo účtu zařízení a popisný název.",
- "deviceDisplayName": "Nakonfigurujte jedinečný název zařízení. Tento název se bude ignorovat v nasazeních hybridně připojených k Microsoft Entra. Název zařízení stále pochází z profilu připojení k doméně pro hybridně připojená zařízení Microsoft Entra.",
- "deviceFriendlyName": "Popisný název zařízení pro zařízení Surface Hub. Pokud ho zadáte, vyplňte také účet zařízení a heslo účtu zařízení.",
- "deviceName": "Název, který se zobrazuje, když se někdo pokusí zjistit zařízení a připojit se k němu",
- "deviceUseType": " Zařízení by se nastavilo podle vaší volby. V nastavení se to dá vždy změnit.\r\n
\r\n
Pro schůzky a prezentace není funkce Windows Hello zapnutá a data se po každé relaci odeberou.\r\n
\r\n
V případě týmové spolupráce je funkce Windows Hello zapnutá a profily se ukládají pro rychlé přihlašování.
\r\n
",
- "enrollmentState": "Určuje, jestli je zařízení zaregistrované.",
- "intuneDevice": "Přejděte na podrobnosti přidruženého zařízení. Hodnota N/A znamená, že žádné přidružené zařízení neexistuje.",
- "lastContacted": "Časové razítko, kdy se se zařízením naposledy navázal kontakt",
- "make": "Výrobce vybraného zařízení",
- "model": "Model vybraného zařízení",
- "profile": "Název profilu přiřazeného k zařízení",
- "profileStatus": "Určuje, jestli je k zařízení přiřazený profil",
- "purchaseOrderId": "ID nákupní objednávky",
- "resourceAccount": "Identita zařízení nebo hlavní název uživatele (UPN)",
- "serialNumber": "Sériové číslo vybraného zařízení",
- "userPrincipalName": "Uživatel, kterým se předem vyplní ověřování při instalaci zařízení"
- },
- "allDevices": "Všechna zařízení",
- "allDevicesAlreadyAssignedError": "Profil Autopilot je už přiřazen ke všem zařízením.",
- "assignFailedDescription": "Nepovedlo se aktualizovat přiřazení pro {0}.",
- "assignFailedTitle": "Nepovedlo se aktualizovat přiřazení profilů AutoPilot",
- "assignSuccessDescription": "Přiřazení pro {0} se úspěšně aktualizovala.",
- "assignSuccessTitle": "Přiřazení profilů AutoPilot se úspěšně aktualizovala",
- "assignSufaceHub2ProfileNextStep": "Další postup pro toto nasazení",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Přiřaďte tento profil k alespoň jedné skupině zařízení.",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Přiřaďte účet prostředku ke každému zařízení Surface Hub, na které chcete nasadit tento profil.",
- "assignedDevicesCount": "Přiřazená zařízení",
- "assignedDevicesResourceAccountDescription": "
Abyste mohli tento profil nasadit na zařízení, musíte zařízení přiřadit k účtu prostředku. Pokud chcete přiřadit existující účet prostředku nebo vytvořit nějaký nový, vyberte po jednom jednotlivá zařízení. Další informace o účtech prostředků
",
- "assignedDevicesResourceAccountStatusBarMessage": "V této tabulce se uvádějí jen zařízení Surface Hub 2, kterým se přiřadil tento profil.",
- "assigningDescription": "Aktualizuje se přiřazení pro {0}.",
- "assigningTitle": "Aktualizují se přiřazení profilů AutoPilot",
- "autoremediationContext": "Na tomto zařízení jsme zjistili změnu hardwaru. Pokoušíme se automaticky zaregistrovat nový hardware. Teď nemusíte nic dělat. Stav se aktualizuje při příštím ohlášení. Další informace o resetování profilu.",
- "autoremediationTitle": "Zařízení {0} čeká na opravu",
- "cannotDeleteMessage": "Tento profil je přidružený ke skupinám. Než budete moct profil odstranit, bude nutné zrušit v něm přiřazení všech skupin.",
- "cannotDeleteTitle": "Nejde odstranit {0}",
- "createdDateTime": "Vytvořeno",
- "deleteMessage": "Pokud tento profil AutoPilot odstraníte, bude se u všech zařízení přiřazených k tomuto profilu zobrazovat Nepřiřazeno.",
- "deleteMessageWithPolicySet": "Profil {0} je zahrnutý v jedné nebo více sadách zásad. Pokud profil {0} odstraníte, nebudete už jej moct přiřazovat prostřednictvím těchto sad zásad. Chcete jej přesto odstranit?",
- "deleteTitle": "Opravdu chcete tento profil odstranit?",
- "description": "Popis",
- "deviceType": "Typ zařízení",
- "deviceUse": "Použití zařízení",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot podporuje připojení k Microsoft Entra jenom pro zařízení Surface Hub 2. Zadejte, jak se zařízení připojují k Active Directory (AD) ve vaší organizaci.\r\n
\r\n
\r\n
\r\n Připojeno k Microsoft Entra: Jen cloud bez místní služby Active Directory Windows Serveru.\r\n
\r\n Zadejte, jak se zařízení připojují k Active Directory (AD) ve vaší organizaci:\r\n
\r\n
\r\n
\r\n Připojeno k Microsoft Entra: Jen cloud bez místní služby Active Directory Windows Serveru\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Při načítání počtu přiřazených zařízení došlo k chybě.",
- "getAssignmentsError": "Při načítání přiřazení profilů AutoPilot došlo k chybě.",
- "harvestDeviceId": "Převést všechna cílová zařízení na Autopilot",
- "harvestDeviceIdDescription": "Standardně se tento profil dá zavést jen pro zařízení Autopilot synchronizovaná ze služby Autopilot.",
- "harvestDeviceIdInfo": "\r\n Když vyberete Ano, zaregistrujete všechna cílová zařízení do Autopilota, pokud už nejsou registrovaná. Až registrovaná zařízení příště projdou softwarem spouštěným při prvním zapnutí Windows, projdou přiřazeným scénářem Autopilot.\r\n \r\n Pamatujte, že některé scénáře Autopilot vyžadují konkrétní minimální sestavení systému Windows. Zkontrolujte, jestli má vaše zařízení minimální požadované sestavení, aby scénářem prošlo.\r\n \r\n Odebrání tohoto profilu neodebere ovlivněná zařízení z Autopilota. Pokud chcete odebrat zařízení z Autopilota, použijte zobrazení Zařízení Windows Autopilot.\r\n ",
- "harvestDeviceIdWarning": "Po převodu se zařízení Autopilot dají vrátit jen tak, že se odstraní ze seznamu zařízení Autopilot.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Profily nasazení Windows AutoPilot umožňují přizpůsobit software spouštěný při prvním zapnutí vašich zařízení.",
- "invalidProfileNameMessage": "Znak {0} není povolený.",
- "joinTypeLabel": "Připojit se k Microsoft Entra ID jako",
- "lastModifiedDateTime": "Poslední změna:",
- "manualRemediationContext": "Na tomto zařízení jsme zjistili změnu hardwaru. Pokud zařízení znovu nezaregistrujete, při obnovení do továrního nastavení automaticky neobdrží profil Autopilot. Další informace o resetování profilu.",
- "manualRemediationTitle": "Zařízení {0} vyžaduje vaši pozornost",
- "name": "Název",
- "noAutopilotProfile": "Žádné profily AutoPilot",
- "notEnoughPermissionAssignedError": "K přiřazení tohoto profilu do jedné nebo více vybraných skupin nemáte dostatečná oprávnění. Obraťte se prosím na svého správce.",
- "profile": "profil",
- "resourceAccountStatusBarMessage": "Pro každé zařízení Surface Hub 2, do kterého je nasazený tento profil, se vyžaduje jeden účet prostředku. Kliknutím získáte další informace.",
- "selectServices": "Vyberte adresářovou službu, ke které se zařízení připojí.",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Režim nasazení",
- "windowsPCCommandMenu": "Počítač s Windows",
- "directoryServiceLabel": "Připojit se k Microsoft Entra ID jako"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Skupiny správců",
- "RoleAssignmentAdminDesc": "Uživatelé ze skupiny správců jsou správci přiřazení k této roli",
- "rolesMenuTitle": "Role Endpoint Manager",
- "RoleAssignmentScopeDesc": "Cílem správců v tomto přiřazení rolí můžou být zásady, aplikace a vzdálené úlohy",
- "RoleAssignmentScope": "Skupiny oborů"
- },
+ "ScopeTags": {
+ "headerDescription": "Vyberte jednu nebo více skupin pro přiřazení balíčku skriptu."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Skript detekce",
+ "placeholder": "Text vstupního skriptu",
+ "requiredValidationMessage": "Zadejte skript detekce"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Vynutit kontrolu podpisu skriptu"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Spustit tento skript pomocí přihlašovacích údajů přihlášeného uživatele"
+ },
+ "RemediationScript": {
+ "infoBox": "Tento skript se spustí v režimu jenom pro detekci, protože není k dispozici žádný skript nápravy."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Nápravný skript",
+ "placeholder": "Text vstupního skriptu"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Spustit skript v 64bitovém PowerShellu"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Neplatný skript. Nejméně jeden znak použitý ve skriptu není platný."
+ },
+ "headerDescription": "Vytvořte vlastní balíček skriptu ze skriptů, které jste napsali. Ve výchozím nastavení se skripty spustí na přiřazených zařízeních každý den.",
+ "infoBox": "Tento skript je jen pro čtení. Některá nastavení tohoto skriptu můžou být zakázaná."
+ },
+ "title": "Vytvořit vlastní skript",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Interval",
+ "time": "Datum a čas"
+ },
+ "Interval": {
+ "day": "Opakuje se každý den",
+ "days": "Opakuje se vždy po {0} dnech",
+ "hour": "Opakuje se každou hodinu",
+ "hours": "Opakuje se vždy po {0} hodinách",
+ "month": "Opakuje se každý měsíc",
+ "months": "Opakuje se vždy po {0} měsících",
+ "week": "Opakuje se každý týden",
+ "weeks": "Opakuje se vždy po {0} týdnech"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) dne {1}",
+ "withDate": "{0} dne {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Upravit – {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Označit vybrané blokovací aplikace jako neúspěšné pouze ve fázi technika",
- "apps": "aplikace",
- "appsListName": "Seznam aplikací",
- "blockingApps": "Blokovací aplikace",
- "managedApps": "Spravované aplikace",
- "noApps": "Žádné aplikace",
- "noAppsError": "Při načítání aplikací došlo k chybě.",
- "selectApps": "Vybrat aplikace",
- "selectedAppsCount": "Počet vybraných aplikací (max. 100): {0}",
- "useSelectedAppsAll": "Vše",
- "useSelectedAppsSelected": "Vybráno",
- "useSelectedAppsToggleLabel": "Zablokovat zařízení, dokud se požadované aplikace nenainstalují, pokud jsou přiřazené k uživateli nebo zařízení"
- },
- "Header": {
- "application": "Aplikace",
- "publisher": "Vydavatel",
- "version": "Verze"
- },
- "SearchBox": {
- "ariaLabel": "Hledat aplikace",
- "placeHolder": "Hledat podle názvu nebo vydavatele"
- },
- "allowToUseToggle": "Povolit uživatelům používat zařízení, když dojde k chybě instalace",
- "blockToggle": "Zablokovat používání zařízení, dokud se nenainstalují všechny aplikace a profily",
- "blockToolTip": "Pokud například do tohoto seznamu přidáte Microsoft Word, nebudou moct cíloví uživatelé a zařízení opustit stránku stavu registrace, dokud se Word úspěšně nenainstaluje.",
- "collectLogToggle": "Zapnout shromažďování protokolů a stránku diagnostiky pro koncové uživatele",
- "create": "Vytvořit profil",
- "customMessageTextBox": "Chybová zpráva",
- "customMessageToggle": "Zobrazit vlastní zprávu, když dojde k časovému limitu nebo chybě",
- "enableForAutopilotOnlyToggle": "Stránku zobrazit jenom pro zařízení, která jsou zřízena pomocí prostředí prvního spuštění (OOBE)",
- "installQualityUpdatesToggle": "Nainstalovat aktualizace pro zvýšení kvality Windows (zařízení se může restartovat) (Preview)",
- "progressToggle": "Zobrazit průběh konfigurace aplikací a profilů",
- "resetToggle": "Povolit uživatelům resetovat zařízení, když dojde k chybě instalace",
- "timeout": "Zobrazit chybu, pokud instalace trvá déle než zadaný počet minut"
- },
+ "OfficeUpdateChannel": {
+ "current": "Aktuální kanál",
+ "deferred": "Půlroční podnikový kanál",
+ "firstReleaseCurrent": "Aktuální kanál (Preview)",
+ "firstReleaseDeferred": "Půlroční podnikový kanál (Preview)",
+ "monthlyEnterprise": "Měsíční podnikový kanál",
+ "placeHolder": "Vyberte jednu možnost."
+ },
"TableHeaders": {
"activity": "Aktivita",
"activityName": "Název aktivity",
@@ -1293,30 +417,175 @@
"excludedGroups": "Vyloučené skupiny",
"licenseType": "Typ licence"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Nakonfigurujte PIN kód a požadavky na přihlašovací údaje, které uživatelé musí splnit, aby mohli získat přístup k aplikacím v pracovním kontextu."
- },
- "DataProtection": {
- "infoText": "Tato skupina obsahuje ovládací prvky ochrany před únikem informací (DLP), jako třeba omezení operací vyjmout, kopírovat, vložit a uložit jako. Tato nastavení určují, jak uživatel pracuje s daty v aplikacích."
- },
- "DeviceTypes": {
- "selectOne": "Vyberte alespoň jeden typ zařízení."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Cílit na aplikace na všech typech zařízení"
- },
- "infoText": "Zvolte, jak chcete tyto zásady zavést do aplikací na různých zařízeních. Pak přidejte alespoň jednu aplikaci.",
- "selectOne": "Pokud chcete vytvořit zásady, vyberte alespoň jednu aplikaci."
- }
- },
- "AssignmentAction": {
- "exclude": "Vyloučeno",
- "include": "Zahrnuto",
- "includeAllDevicesVirtualGroup": "Zahrnuto",
- "includeAllUsersVirtualGroup": "Zahrnuto"
- },
+ "Inputs": {
+ "accountDomain": "Doména účtu",
+ "accountDomainHint": "např. contosodomain",
+ "accountDomainInfoBalloon": "Zadejte doménu účtu uživatele.",
+ "accountTypeInfoBalloon": "Zadejte typ účtu, který se konfiguruje, podle modelu ověřování.",
+ "allowContactSetting": "Povolit uživateli měnit nastavení kontaktů",
+ "allowContactSyncInfoBalloon": "Určuje, jestli uživatel může měnit nastavení synchronizace kontaktů.",
+ "allowUserChange": "Povolit uživateli měnit nastavení",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Zadejte prosím název balíčku podobný tomuto: com.microsoft.word",
+ "androidUrlValidation": "Zadejte platnou adresu URL podobnou této: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "Kontext instalace aplikace",
+ "appUrlLabel": "Adresa URL v obchodu s aplikacemi",
+ "appleUrlValidation": "Zadejte platnou adresu URL podobnou této: https://www.itunes.apple.com/cz/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Použitelný typ zařízení",
+ "assignmentActionLabel": "Režim",
+ "authenticationMethodInfoBalloon": "Určuje metodu ověřování pro daného uživatele.",
+ "authenticationMetod": "Metoda ověřování",
+ "authenticationType": "Typ ověřování",
+ "authenticationTypeInfoBalloon": "Zadat typ ověřování uživatele",
+ "availableLicenseCount": "Dostupné licence",
+ "basicAuth": "Základní ověřování",
+ "biometricsInfoBalloon": "Aby uživatelé mohli přistupovat k aplikaci na svém zařízení, můžou se vyžadovat biometriky, třeba Touch ID nebo Face ID. Když se budou vyžadovat, použijí se jako doplněk metody ověřování vybrané v tomto profilu. Toto nastavení by se nemělo povolit, když jsou nasazené zásady ochrany aplikací Intune, protože zásady ochrany aplikací zahrnují požadavky na přístup, které se musí splnit před přístupem ke spravovaným datům. Když se povolí obě funkce, bude to mít za následek několik výzev pro přístup k Outlook Mobile. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Vypnuto. ",
+ "bookNameLabel": "Název knihy",
+ "bundleDescriptionHint": "Zadejte popis, který popisuje obsažené aplikace.",
+ "calendar": "Kalendář",
+ "categoryLabel": "Kategorie",
+ "categoryNameLabel": "Výchozí název",
+ "certProfileType": "Typ profilu certifikátu",
+ "certificate": "Certifikát",
+ "certificates": "Certifikáty",
+ "commandLineLabel": "Argumenty příkazového řádku",
+ "commandLineSizeHint": "Maximální délka textu argumentů příkazového řádku je 1024 znaků.",
+ "configurationSettingsFormatLabel": "Formát nastavení konfigurace",
+ "configurationSettingsLabel": "Formát nastavení",
+ "contactSync": "Uložit kontakty",
+ "contactSyncInfoBalloon": "Ukládání kontaktů do nativního adresáře mobilního zařízení umožňuje, aby se nové hovory a textové zprávy propojily s existujícími outlookovými kontakty uživatele. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Vypnuto.",
+ "contacts": "Kontakty",
+ "createdDateTime": "Vytvořeno",
+ "defaultCategoryHint": "Výchozí kategorie se nedají změnit.",
+ "deploySMimeCertsFromIntune": "Nasadit certifikáty S/MIME z Intune",
+ "descriptionGenericLabel": "Popis",
+ "descriptionHint": "Zadejte popis...",
+ "descriptionLabel": "Popis",
+ "descriptionSizeHint": "Popis by neměl být delší než 10 000 znaků.",
+ "developerLabel": "Vývojář",
+ "developerSizeHint": "Maximální délka jména vývojáře je 256 znaků.",
+ "disable": "Vypnout",
+ "disabled": "Zakázáno",
+ "displayNameLabel": "Název",
+ "displayVersionHint": "Zadat verzi aplikace",
+ "displayVersionLabel": "Verze aplikace",
+ "displayVersionLengthCheck": "Verze zobrazení by měla být dlouhá maximálně 130 znaků.",
+ "eBookCategoryNameLabel": "Výchozí název",
+ "emailAccount": "Název e-mailového účtu",
+ "emailAccountHint": "třeba podnikový e-mail",
+ "emailAccountInfoBalloon": "Určuje zobrazovaný název pro e-mailový účet, který se bude zobrazovat uživatelům na zařízeních.",
+ "emailAddressAttribute": "Atribut e-mailové adresy z Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Určuje e-mailovou adresu, která se použije k odesílání a přijímání pošty.",
+ "emailServer": "E-mailový server",
+ "emailServerHint": "např. mail.contoso.com",
+ "emailServerInfoBalloon": "Určuje název hostitele Exchange Serveru.",
+ "enable": "Povolit",
+ "enableSMime": "Povolit S/MIME",
+ "enabled": "Povoleno",
+ "encryptAllEmails": "Šifrovat všechny e-maily",
+ "encryptionCertificates": "Šifrovací certifikáty",
+ "endUserNotifications": "Oznámení koncovým uživatelům",
+ "enrollmentTypeLabel": "Typ registrace zařízení",
+ "externalRecipients": "Tip pro e-mail Externí příjemci",
+ "externalRecipientsInfoBalloon": "Tip pro e-mail Externí příjemci se zobrazí, když odesílatel přidá příjemce, který je externí, nebo distribuční skupinu, která externí příjemce obsahuje. Tento tip pro e-mail informuje odesílatele, že zpráva, kterou vytvářejí, opustí organizaci. Díky tomu můžou zvolit správné formulace slov, tón a obsah. K dispozici jen pro účty Exchange Online a místní účty, které používají hybridní moderní ověřování. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto.",
+ "focusedInbox": "Prioritní doručená pošta",
+ "focusedInboxInfoBalloon": "Prioritní doručená pošta rozděluje doručenou poštu do dvou karet – Prioritní a Jiné. Vaše nejdůležitější e-maily se nacházejí na kartě Prioritní, zatímco ty ostatní zůstávají stále snadno přístupné na kartě Jiné, kde nikterak nepřekážejí. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto. ",
+ "fullScreenEnabledLabel": "Na celou obrazovku",
+ "gmailNineAmountOfEmail": "Počet e-mailů k synchronizaci",
+ "gmailNineAuthenticationMethodInfoBalloon": "Vyberte, jak chcete, aby se uživatelé ověřovali u e-mailového serveru. Nejbezpečnější a bezproblémové prostředí svým koncovým uživatelům poskytnete pomocí certifikátů. Ověřování pomocí certifikátů ještě není k dispozici, protože nejsou k dispozici profily certifikátů SCEP a PKCS pro zařízení vlastníků. ",
+ "gmailNineCertificateUPNInfoBalloon": "Certifikát musí obsahovat hlavní název uživatele (UPN) jako alternativní název subjektu.",
+ "gmailNineEmailAddressInfoBalloon": "Atribut, který Intune získá z Microsoft Entra ID pro dynamické generování e-mailové adresy, kterou bude profil používat, například MyName@contoso.com (UPN). Další informace o atributech Microsoft Entra pro e-mailové profily.",
+ "gmailNineEmailServerInfoBalloon": "Umístění Exchange (URL) e-mailového serveru, ke kterému se zadaná aplikace připojuje, aby získala e-mail",
+ "gmailNineEmailSynchronizeInfoBalloon": "Umožňuje řídit, kolik e-mailů klient bude synchronizovat.",
+ "gmailNineSSLInfoBalloon": "Povolením protokolu SSL zabezpečíte veškerou komunikaci s e-mailovým serverem.",
+ "gmailNineUsernameInfoBalloon": "Atribut, který Intune získá z Microsoft Entra ID pro dynamické generování uživatelského jména, které bude profil používat, například MyName@contoso.com (UPN) nebo MyName (uživatelské jméno). Další informace o atributech Microsoft Entra pro e-mailové profily.",
+ "ignoreManifestScope": "Ignorovat obor manifestu",
+ "ignoreVersionDetection": "Ignorovat verzi aplikace",
+ "informationUrlLabel": "Adresa URL informací",
+ "informationUrlSizeHint": "Maximální délka adresy URL informací je 1024 znaků.",
+ "installAsManaged": "Instalovat jako spravované",
+ "installationSourceLabel": "Typ aplikace",
+ "installerTypeInfoBalloon": "Typ instalačního programu balíčku aplikace.",
+ "installerTypeLabel": "Typ instalačního programu",
+ "isFeatured": "Zobrazit na Portálu společnosti jako vybranou aplikaci",
+ "isMAMEnabledToggleLabel": "Ano",
+ "lastModifiedDateTime": "Čas poslední aktualizace",
+ "ldapUrl": "URL protokolu LDAP",
+ "licensingType": "Podporuje přiřazení kontextu zařízení.",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimální operační systém",
+ "modernAuth": "Moderní ověřování",
+ "nameHint": "Zadejte název",
+ "nameLabel": "Název",
+ "nameSizeHint": "Maximální délka názvu je 512 znaků.",
+ "notConfigured": "Nenakonfigurováno",
+ "notesLabel": "Poznámky",
+ "notesSizeHint": "Maximální délka textu poznámek je 1024 znaků.",
+ "notificationType": "Typ oznámení",
+ "oneDay": "Jeden den",
+ "oneMonth": "Jeden měsíc",
+ "oneWeek": "Jeden týden",
+ "outlookSMimeSettings": "Nastavení standardu S/MIME v Outlooku",
+ "ownerLabel": "Vlastník",
+ "ownerSizeHint": "Maximální délka jména vlastníka je 256 znaků.",
+ "packageIdLabel": "Identifikátor balíčku",
+ "packageNameLabel": "Název balíčku",
+ "pivCredentialNotConfigured": "Nevybrali jste vystavitele odvozených přihlašovacích údajů pro vašeho tenanta. Než budete moct tyto zásady na zařízení úspěšně použít, bude nutné jednoho nakonfigurovat.",
+ "platformLabel": "Platforma",
+ "policyDescriptionLabel": "Popis",
+ "policyNameLabel": "Název",
+ "preComposedIconEnabled": "Předem vytvořeno",
+ "primarySMTPAddress": "Primární adresa SMTP",
+ "privacyUrlLabel": "Adresa URL informací o ochraně osobních údajů",
+ "publisherHint": "Zadejte název vydavatele",
+ "publisherLabel": "Vydavatel",
+ "publisherSizeHint": "Název vydavatele by měl být dlouhý 2 až 1024 znaků (včetně).",
+ "require": "Vyžadovat",
+ "requireBiometrics": "Pro přístup k aplikaci vyžadovat biometriku",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "Vyžaduje se alespoň jedna značka oboru.",
+ "searchAppLabel": "Vybrat aplikaci",
+ "searchAppLinkText": "Hledat v App Storu",
+ "searchWinGetPublicRepositoryLinkText": "Hledat v úložišti komunity Správce balíčků systému Windows",
+ "searchWinGetStoreRepositoryLinkText": "Hledat v aplikaci Microsoft Store (nová verze)",
+ "selectAAD": "Vyberte atribut Microsoft Entra.",
+ "selectAppFileLabel": "Vybrat soubor",
+ "selectAppFileLinkText": "Vybrat soubor balíčku aplikace",
+ "selectAppFileToUpdateLabel": "Vybrat soubor k aktualizaci",
+ "selectAuthMethod": "Vyberte metodu ověřování.",
+ "selectAuthType": "Vybrat typ ověřování",
+ "selectCatalogAppLabel": "Vybrat aplikaci",
+ "selectCatalogAppLinkText": "Hledat v Katalogu podnikových aplikací",
+ "selectCertificate": "Vyberte certifikát.",
+ "signAllEmails": "Podepisovat všechny e-maily",
+ "signingCertificates": "Podpisové certifikáty",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Popis sady",
+ "suiteNameLabel": "Název sady",
+ "targetApplicationBundleIdentifier": "Identifikátor sady cílové aplikace",
+ "targetedPlatformsLabel": "Cílová platforma",
+ "tasks": "Úlohy",
+ "threeDays": "Tři dny",
+ "totalLicenseCount": "Celkový počet licencí",
+ "twoWeeks": "Dva týdny",
+ "unifiedAssignmentsLabel": "Přiřadit k:",
+ "unlimited": "Bez omezení",
+ "urlHint": "Zadejte platnou adresu URL",
+ "useManagedBrowserHint": "Jenom Android a iOS. Další informace",
+ "useManagedBrowserLabel": "K otevření tohoto odkazu vyžadovat spravovaný prohlížeč",
+ "userPrinicipalName": "Hlavní název uživatele",
+ "username": "Uživatelské jméno",
+ "usernameAttribute": "Atribut uživatelského jména z Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Určuje hlavní název uživatele (UPN) pro e-mailový profil, pomocí kterého se ověří účet.",
+ "usernamePassword": "Uživatelské jméno a heslo",
+ "webAppUrlHint": "Zadejte platnou adresu URL, která začíná na http:// nebo https://.",
+ "webAppUrlLabel": "Adresa URL aplikace",
+ "webAppUrlSizeHint": "Maximální délka adresy URL aplikace je 1024 znaků",
+ "windowsUrlValidation": "Zadejte platnou adresu URL podobnou této: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "Zadaná data XML",
+ "xmlFormatInvalid": "Formát zásad XML je neplatný.",
+ "xmlTooLarge": "Velikost vstupu musí být menší než 1 MB."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Ovlivnění uživatelé se omezí prostřednictvím přiřazené stránky autority pro spolusprávu s následující nejvyšší prioritou, nebo výchozí stránky autority pro spolusprávu, pokud není přiřazená žádná jiná.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Autorita pro spolusprávu",
"settingDescription": "Nastavení spolusprávy určuje, kdo bude vlastnit úlohy."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Aplikace systému Android Enterprise",
- "androidForWorkApp": "Aplikace spravovaného obchodu Google Play",
- "androidLobApp": "Obchodní aplikace Android",
- "androidStoreApp": "Aplikace z obchodu pro Android",
- "builtInAndroid": "Integrovaná aplikace pro Android",
- "builtInApp": "Integrovaná aplikace",
- "builtInIos": "Integrovaná aplikace pro iOS",
- "default": "",
- "iosIPadOSWebClip": "Webový klip pro iOS/iPadOS",
- "iosLobApp": "Obchodní aplikace iOS",
- "iosStoreApp": "Aplikace z obchodu pro iOS",
- "iosVppApp": "Aplikace iOS koupená přes Volume Purchase Program",
- "lineOfBusinessApp": "Obchodní aplikace",
- "macOSDmgApp": "Aplikace pro macOS (.DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Obchodní aplikace pro macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Aplikace Microsoft 365 (macOS)",
- "macOSPkgApp": "Aplikace pro macOS (PKG)",
- "macOSWebClip": "Webový klip pro macOS",
- "macOsVppApp": "Aplikace macOS koupená přes Volume Purchase Program",
- "managedAndroidLobApp": "Spravovaná obchodní aplikace Android",
- "managedAndroidStoreApp": "Spravovaná aplikace z obchodu pro Android",
- "managedGooglePlayApp": "Aplikace spravovaného obchodu Google Play",
- "managedGooglePlayPrivateApp": "Privátní aplikace spravovaného obchodu Google Play",
- "managedGooglePlayWebApp": "Webový odkaz spravovaného obchodu Google Play",
- "managedIosLobApp": "Spravovaná obchodní aplikace iOS",
- "managedIosStoreApp": "Spravovaná aplikace z obchodu pro iOS",
- "microsoftStoreForBusinessApp": "Aplikace pro Microsoft Store pro firmy",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store pro firmy",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 a novější)",
- "webApp": "Webový odkaz",
- "windowsAppXLobApp": "Obchodní aplikace Windows AppX",
- "windowsClassicApp": "Aplikace pro Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 a novější)",
- "windowsMobileMsiLobApp": "Obchodní aplikace Windows MSI",
- "windowsPhone81AppXBundleLobApp": "Obchodní aplikace Windows Phone 8.1 AppX",
- "windowsPhone81AppXLobApp": "Obchodní aplikace Windows Phone 8.1 AppX",
- "windowsPhone81StoreApp": "Aplikace pro Windows Phone 8.1 Store",
- "windowsPhoneXapLobApp": "Obchodní aplikace Windows Phone XAP",
- "windowsStoreApp": "Aplikace Microsoft Store (starší verze)",
- "windowsUniversalAppXLobApp": "Obchodní aplikace Windows Universal AppX",
- "windowsUniversalLobApp": "Univerzální obchodní aplikace pro Windows",
- "windowsWebApp": "Webový odkaz Windows"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Doporučené",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrajn",
+ "countryNameZA": "Jihoafrická republika",
+ "countryNameJO": "Jordánsko",
+ "countryNameSD": "Súdán",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Česká republika",
+ "countryNameLT": "Litva",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ekvádor",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Lichtenštejnsko",
+ "countryNameHK": "Hongkong – zvláštní administrativní oblast",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Saúdská Arábie",
+ "countryNamePG": "Papua-Nová Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "Indie",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Rumunsko",
+ "countryNameKZ": "Kazachstán",
+ "countryNameLC": "Svatá Lucie",
+ "countryNameGE": "Gruzie",
+ "countryNameTT": "Trinidad a Tobago",
+ "countryNameMP": "Severní Mariany",
+ "countryNameMV": "Maledivy",
+ "countryNameFI": "Finsko",
+ "countryNameNO": "Norsko",
+ "countryNameEE": "Estonsko",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Uzbekistán",
+ "countryNameME": "Černá Hora",
+ "countryNameTJ": "Tádžikistán",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "Francie",
+ "countryNameOM": "Omán",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Itálie",
+ "countryNameAZ": "Ázerbájdžán",
+ "countryNameKG": "Kyrgyzstán",
+ "countryNameWF": "Wallis a Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falklandy (Malvíny)",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "Jižní Súdán",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Sýrie",
+ "countryNameMD": "Moldavsko",
+ "countryNameVC": "Svatý Vincenc a Grenadiny",
+ "countryNameID": "Indonésie",
+ "countryNameRE": "Réunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "Severní Makedonie",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Francouzská Polynésie",
+ "countryNameKY": "Kajmanské ostrovy",
+ "countryNameIO": "Britské indickooceánské území",
+ "countryNameRU": "Rusko",
+ "countryNameMA": "Maroko",
+ "countryNameAU": "Austrálie",
+ "countryNameBO": "Bolívie",
+ "countryNameVA": "Svatý stolec (Vatikán)",
+ "countryNameVG": "Britské Panenské ostrovy",
+ "countryNameFM": "Mikronésie",
+ "countryNameAQ": "Antarktida",
+ "countryNameZM": "Zambie",
+ "countryNameBR": "Brazílie",
+ "countryNameIS": "Island",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulharsko",
+ "countryNamePR": "Portoriko",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamy",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macao – zvláštní administrativní oblast",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "Americká Samoa",
+ "countryNameBQ": "Bonaire, Svatý Eustach a Saba",
+ "countryNameMF": "Svatý Martin (Francie)",
+ "countryNameTM": "Turkmenistán",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Nová Kaledonie",
+ "countryNameAC": "Ascensión",
+ "countryNameBN": "Brunej",
+ "countryNameBD": "Bangladéš",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambie",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Kanada",
+ "countryNameSH": "Svatá Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolsko",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Kamerun",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japonsko",
+ "countryNameCY": "Kypr",
+ "countryNameCD": "Konžská demokratická republika",
+ "countryNameTN": "Tunisko",
+ "countryNameTR": "Turecko",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Švédsko",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Kambodža",
+ "countryNamePL": "Polsko",
+ "countryNameDZ": "Alžírsko",
+ "countryNameLR": "Libérie",
+ "countryNameSO": "Somálsko",
+ "countryNameDM": "Dominika",
+ "countryNameEG": "Egypt",
+ "countryNameGF": "Francouzská Guyana",
+ "countryNameNZ": "Nový Zéland",
+ "countryNamePS": "Palestinská samospráva",
+ "countryNameIL": "Izrael",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Řecko",
+ "countryNameNG": "Nigérie",
+ "countryNameMR": "Mauritánie",
+ "countryNameVI": "Americké Panenské ostrovy",
+ "countryNameGQ": "Rovníková Guinea",
+ "countryNameMX": "Mexiko",
+ "countryNameDJ": "Džibutsko",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "Čína",
+ "countryNameMZ": "Mosambik",
+ "countryNameBV": "Bouvetův ostrov",
+ "countryNameNF": "Norfolk",
+ "countryNameTZ": "Tanzanie",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "Jižní Georgie a Jižní Sandwichovy ostrovy",
+ "countryNameRS": "Srbsko",
+ "countryNameCC": "Kokosové ostrovy",
+ "countryNameNA": "Namibie",
+ "countryNameDE": "Německo",
+ "countryNameCG": "Konžská republika",
+ "countryNameKW": "Kuvajt",
+ "countryNameMH": "Marshallovy ostrovy",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Bělorusko",
+ "countryNameMY": "Malajsie",
+ "countryNameST": "Svatý Tomáš a Princův ostrov",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Čad",
+ "countryNameCX": "Vánoční ostrov",
+ "countryNameIR": "Írán",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bissau",
+ "countryNameUA": "Ukrajina",
+ "countryNameCU": "Kuba",
+ "countryNameCO": "Kolumbie",
+ "countryNameNI": "Nikaragua",
+ "countryNameHR": "Chorvatsko",
+ "countryNameSC": "Seychely",
+ "countryNameNL": "Nizozemsko",
+ "countryNameUM": "Menší odlehlé ostrovy Spojených států amerických",
+ "countryNameIM": "Ostrov Man",
+ "countryNameFJ": "Fidži",
+ "countryNameSR": "Surinam",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "Spojené království",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovinsko",
+ "countryNameAM": "Arménie",
+ "countryNameAR": "Argentina",
+ "countryNamePM": "Saint-Pierre a Miquelon",
+ "countryNameTF": "Francouzská jižní a antarktická území",
+ "countryNameDO": "Dominikánská republika",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinik",
+ "countryNamePT": "Portugalsko",
+ "countryNameCF": "Středoafrická republika",
+ "countryNameBE": "Belgie",
+ "countryNameKM": "Komory",
+ "countryNameLY": "Libye",
+ "countryNameIE": "Irsko",
+ "countryNameKP": "Severní Korea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slovensko",
+ "countryNameTC": "Turks a Caicos",
+ "countryNameNP": "Nepál",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Jemen",
+ "countryNameBA": "Bosna a Hercegovina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Irák",
+ "countryNameSJ": "Špicberky a Jan Mayen",
+ "countryNameAX": "Ålandy",
+ "countryNameKE": "Keňa",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermudy",
+ "countryNameFO": "Faerské ostrovy",
+ "countryNameBL": "Svatý Bartoloměj",
+ "countryNameLB": "Libanon",
+ "countryNameJM": "Jamajka",
+ "countryNameAF": "Afghánistán",
+ "countryNameES": "Španělsko",
+ "countryNameMC": "Monako",
+ "countryNameSG": "Singapur",
+ "countryNameAL": "Albánie",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d’Ivoire (Pobřeží slonoviny)",
+ "countryNameTW": "Tchaj-wan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cookovy ostrovy",
+ "countryNameTH": "Thajsko",
+ "countryNameHM": "Heardův ostrov a McDonaldovy ostrovy",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "Spojené státy",
+ "countryNameAT": "Rakousko",
+ "countryNameKR": "Korejská republika",
+ "countryNamePK": "Pákistán",
+ "countryNameDK": "Dánsko",
+ "countryNameSV": "Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Etiopie",
+ "countryNameMG": "Madagaskar",
+ "countryNameCR": "Kostarika",
+ "countryNameLU": "Lucembursko",
+ "countryNameQA": "Katar",
+ "countryNameBT": "Bhútán",
+ "countryNameSB": "Šalamounovy ostrovy",
+ "countryNameAE": "Spojené arabské emiráty",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua a Barbuda",
+ "countryNameMU": "Mauricius",
+ "countryNameHU": "Maďarsko",
+ "countryNameSX": "Svatý Martin (Nizozemsko)",
+ "countryNameCH": "Švýcarsko",
+ "countryNamePN": "Pitcairnovy ostrovy",
+ "countryNameGL": "Grónsko",
+ "countryNamePH": "Filipíny",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Svatý Kryštof a Nevis",
+ "countryNameLK": "Srí Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Lotyšsko",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Autor",
+ "template": "Název šablony"
+ },
+ "Row": {
+ "ariaLabel": "{0} řádek z {1} sloupec {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Začněte od začátku a vyberte požadované vlastnosti z knihovny dostupných vlastností inventáře."
+ },
+ "SettingsCatalog": {
+ "subtitle": "Začněte od začátku a vyberte požadovaná nastavení z knihovny dostupných nastavení",
+ "title": "Katalog nastavení"
+ },
+ "Templates": {
+ "subtitle": "Šablony obsahují skupiny nastavení uspořádané podle funkcí. Pokud nechcete zásady sestavovat ručně nebo chcete zařízení nakonfigurovat pro přístup k firemním sítím, třeba při konfiguraci Wi-Fi nebo VPN, použijte šablonu.",
+ "title": "Šablony"
+ },
+ "noData": "Nepovedlo se najít žádné šablony zásad"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Doporučené nastavení filtru SmartScreen aplikace Microsoft Edge: Windows 10 v šabloně konfigurace cloudu. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Zjišťování koncových bodů a odpověď"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "Izolace aplikací a prohlížečů",
+ "aSRApplicationControl": "Řízení aplikací",
+ "aSRAttackSurfaceReduction": "Pravidla pro omezení možností útoku",
+ "aSRDeviceControl": "Řízení zařízení",
+ "aSRExploitProtection": "Ochrana Exploit Protection",
+ "aSRWebProtection": "Webová ochrana (Microsoft Edge starší verze)",
+ "aVExclusions": "Výjimky Antivirové ochrany v programu Microsoft Defender",
+ "antivirus": "Antivirová ochrana v programu Microsoft Defender",
+ "cloudPC": "Windows 365 – Standardní hodnoty zabezpečení",
+ "default": "Zabezpečení koncového bodu",
+ "defenderTest": "Ukázka programu Microsoft Defender pro koncový bod",
+ "diskEncryption": "Nástroj BitLocker",
+ "eDR": "Zjišťování koncových bodů a odpověď",
+ "edgeSecurityBaseline": "Standardní hodnoty Microsoft Edge",
+ "edgeSecurityBaselinePreview": "Preview: Standardní hodnoty Microsoft Edge",
+ "editionUpgradeConfiguration": "Upgrade edice a přepnutí režimu",
+ "firewall": "Brána firewall systému Windows",
+ "firewallRules": "Pravidla firewallu systému Windows",
+ "identityProtection": "Ochrana účtu",
+ "identityProtectionPreview": "Ochrana účtu (Preview)",
+ "mDMSecurityBaseline1810": "Základní úroveň zabezpečení MDM pro Windows 10 a novější pro říjen 2018",
+ "mDMSecurityBaseline1810Preview": "Preview: Základní úroveň zabezpečení MDM pro Windows 10 a novější pro říjen 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Preview: Základní úroveň zabezpečení MDM pro Windows 10 pro říjen 2018 (beta verze)",
+ "mDMSecurityBaseline1906": "Základní úroveň zabezpečení MDM pro Windows 10 a novější pro květen 2019",
+ "mDMSecurityBaseline2004": "Základní úroveň zabezpečení MDM pro Windows 10 a novější pro srpen 2020",
+ "mDMSecurityBaseline2101": "Základní úroveň zabezpečení MDM pro Windows 10 a novější, prosinec 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "Brána firewall macOS",
+ "microsoftDefenderBaseline": "Standardní hodnoty pro Microsoft Defender pro koncový bod",
+ "office365Baseline": "Standardní hodnoty Microsoft Office O365",
+ "office365BaselinePreview": "Preview: Standardní hodnoty Microsoft Office O365",
+ "securityBaselines": "Základní úrovně zabezpečení",
+ "test": "Testovací šablona",
+ "testFirewallRulesSecurityTemplateName": "Pravidla firewallu systému Windows (test)",
+ "testIdentityProtectionSecurityTemplateName": "Ochrana účtu (test)",
+ "windowsSecurityExperience": "Možnosti Zabezpečení Windows"
+ },
+ "Firewall": {
+ "mDE": "Brána firewall systému Windows"
+ },
+ "FirewallRules": {
+ "mDE": "Pravidla firewallu systému Windows"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "Nastavení přesunutí známých složek na OneDrivu: Windows 10 v šabloně konfigurace cloudu. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Ochrana účtu",
+ "administrativeTemplates": "Šablony pro správu",
+ "androidCompliancePolicy": "Zásady dodržování předpisů v Androidu",
+ "aospDeviceOwnerCompliancePolicy": "Zásady dodržování předpisů v Androidu (AOSP)",
+ "applicationControl": "Řízení aplikací pro firmy",
+ "attackSurfaceReductionRules": "Pravidla pro omezení možností útoku",
+ "bitlocker": "Nástroj BitLocker",
+ "custom": "Vlastní",
+ "deliveryOptimization": "Optimalizace doručení",
+ "derivedPersonalIdentityVerificationCredential": "Odvozené přihlašovací údaje",
+ "deviceControl": "Řízení zařízení",
+ "deviceFeatures": "Funkce zařízení",
+ "deviceFirmwareConfigurationInterface": "Rozhraní DFCI (Device Firmware Configuration Interface)",
+ "deviceLock": "Zámek zařízení",
+ "deviceOwner": "Plně spravovaná, vyhrazená, vlastněná společností a s pracovním profilem",
+ "deviceRestrictions": "Omezení zařízení",
+ "deviceRestrictionsWindows10Team": "Omezení zařízení (Windows 10 Team)",
+ "domainJoinPreview": "Připojení k doméně",
+ "editionUpgradeAndModeSwitch": "Upgrade edice a přepnutí režimu",
+ "education": "Vzdělávání",
+ "email": "E-mail",
+ "emailSamsungKnoxOnly": "E-mail (jen Samsung KNOX)",
+ "endpointProtection": "Ochrana koncového bodu",
+ "expeditedCheckin": "Konfigurace správy mobilních zařízení",
+ "exploitProtection": "Ochrana Exploit Guard",
+ "extensions": "Rozšíření",
+ "hardwareConfigurations": "Konfigurace systému BIOS a další nastavení",
+ "identityProtection": "Ochrana identity",
+ "iosCompliancePolicy": "Zásady dodržování předpisů v iOSu",
+ "kiosk": "Veřejný terminál",
+ "localUsersAndGroups": "Členství uživatelů ve skupinách",
+ "macCompliancePolicy": "Zásady dodržování předpisů na Macu",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Standardní hodnoty zabezpečení Microsoft 365 Apps for Enterprise",
+ "microsoftDefenderAntivirus": "Antivirová ochrana v programu Microsoft Defender",
+ "microsoftDefenderAntivirusexclusions": "Výjimky Antivirové ochrany v programu Microsoft Defender",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktopová zařízení se systémem Windows 10 nebo novějším)",
+ "microsoftDefenderFirewallRules": "Pravidla firewallu systému Windows",
+ "microsoftDefenderforEndpointSecurityBaseline": "Standardní hodnoty zabezpečení služby Microsoft Defender for Endpoint",
+ "microsoftEdgeBaseline": "Standardní hodnoty zabezpečení pro Microsoft Edge",
+ "mxProfileZebraOnly": "Profil MX (pouze Zebra)",
+ "networkBoundary": "Ohraničení sítě",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Přepsat zásady skupiny",
+ "pkcsCertificate": "Certifikát PKCS",
+ "pkcsImportedCertificate": "Importovaný certifikát PKCS",
+ "preferenceFile": "Soubor preferencí",
+ "presets": "Předvolby",
+ "scepCertificate": "Certifikát SCEP",
+ "secureAssessmentEducation": "Secure Assessment (Education)",
+ "securityBaselineForHololens2Advanced": "Pokročilé standardní hodnoty zabezpečení pro HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standardní základní úroveň zabezpečení pro HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Standardní hodnoty zabezpečení pro Microsoft Edge",
+ "settingsCatalog": "Katalog nastavení",
+ "sharedMultiUserDevice": "Sdílené víceuživatelské zařízení",
+ "softwareUpdates": "Aktualizace softwaru",
+ "trustedCertificate": "Důvěryhodný certifikát",
+ "unknown": "Neznámé",
+ "unsupported": "Nepodporovaný",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Import Wi-Fi",
+ "windows10CompliancePolicy": "Zásady dodržování předpisů ve Windows 10/11",
+ "windows10MobileCompliancePolicy": "Zásady dodržování předpisů ve Windows 10 Mobile",
+ "windows10XScep": "Certifikát SCEP – TEST",
+ "windows10XTrustedCertificate": "Důvěryhodný certifikát – TEST",
+ "windows10XVPN": "Síť VPN – TEST",
+ "windows10XWifi": "WIFI – TEST",
+ "windows11SecurityBaseline": "Základní úroveň zabezpečení pro Windows 10 a novější",
+ "windows365SecurityBaseline": "Windows 365 – Standardní hodnoty zabezpečení",
+ "windows8CompliancePolicy": "Zásady dodržování předpisů ve Windows 8",
+ "windowsHealthMonitoring": "Monitorování stavu Windows",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Zásady dodržování předpisů ve Windows Phone",
+ "windowsUpdateforBusiness": "Windows Update pro firmy",
+ "wiredNetwork": "Drátová síť",
+ "workProfile": "Pracovní profil v osobním vlastnictví"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Zpřístupnit aktualizaci postupně",
+ "immediateStart": "Zpřístupnit aktualizaci co nejdříve",
+ "startDateOnly": "Zpřístupnit aktualizaci k určitému datu"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Automaticky odepřít",
+ "autoGrant": "Automaticky udělit",
+ "prompt": "Zobrazit výzvu"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Přístup k poloze (přibližné)",
+ "accessFineLocation": "Přístup k poloze (přesné)",
+ "addVoicemail": "Přidávání hlasových zpráv",
+ "bodySensors": "Povolování dat z fyziologických senzorů",
+ "bodySensorsBackground": "Povolit data tělesného senzoru na pozadí",
+ "callPhone": "Volání",
+ "camera": "Fotoaparát",
+ "getAccounts": "Získávání účtů",
+ "nearbyDevices": "Zařízení v okolí",
+ "nearbyWifiDevices": "Zařízení Wi-Fi v okolí",
+ "postNotifications": "Oznámení o příspěvcích",
+ "processOutgoingCalls": "Zpracování odchozích hovorů",
+ "readCalendar": "Kalendář (čtení)",
+ "readCallLog": "Protokol volání (čtení)",
+ "readContacts": "Kontakty (čtení)",
+ "readExternalStorage": "Externí úložiště (čtení)",
+ "readMediaAudio": "Multimédia – zvuk (čtení)",
+ "readMediaImages": "Multimédia – obrázky (čtení)",
+ "readMediaVideo": "Multimédia – video (čtení)",
+ "readPhoneState": "Stav telefonu (čtení)",
+ "readSMS": "SMS (čtení)",
+ "receiveMMS": "MMS (přijímání)",
+ "receiveSMS": "SMS (přijímání)",
+ "receiveWAPPush": "Nabízené zprávy WAP (přijímání)",
+ "recordAudio": "Záznam zvuku",
+ "sendSMS": "SMS (odesílání)",
+ "useSIP": "Používání služby SIP",
+ "writeCalendar": "Kalendář (zápis)",
+ "writeCallLog": "Protokol volání (zápis)",
+ "writeContacts": "Kontakty (zápis)",
+ "writeExternalStorage": "Externí úložiště (zápis)"
+ },
+ "RemoveDialog": {
+ "description": "Opravdu chcete oprávnění odebrat?",
+ "title": "Odebrat"
+ },
+ "TableHeader": {
+ "permission": "Oprávnění",
+ "permissionGroup": "Skupina oprávnění",
+ "permissionName": "Název oprávnění",
+ "permissionState": "Stav oprávnění"
+ },
+ "addButtonLabel": "+Přidat",
+ "addPermissionTableDescription": "Zadejte oprávnění, která chcete přepsat. Pokud se nevyberou nebo nezadají explicitně, použije se výchozí chování.",
+ "addPermissionsTitle": "Přidat oprávnění",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Další informace o oprávněních modulu runtime Androidu",
+ "permissionTableDescription": "Oprávnění, která se tady udělí, přepíšou pro vybrané aplikace zásady Výchozí oprávnění aplikace.",
+ "permissionsTitle": "Oprávnění"
+ },
+ "AssignmentAction": {
+ "exclude": "Vyloučeno",
+ "include": "Zahrnuto",
+ "includeAllDevicesVirtualGroup": "Zahrnuto",
+ "includeAllUsersVirtualGroup": "Zahrnuto"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search jako výchozí",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype pro firmy",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "Soubor nebo složka jako vybraný požadavek",
+ "pathToolTip": "Úplná cesta souboru nebo složky, které se mají zjistit",
+ "property": "Vlastnost",
+ "valueToolTip": "Vyberte hodnotu požadavku, která odpovídá vybrané metodě zjišťování. Metody zjišťování na základě data a času by se měly zadat v místním formátu."
+ },
+ "GridColumns": {
+ "pathOrScript": "Cesta/skript",
+ "type": "Typ"
+ },
+ "Registry": {
+ "keyPath": "Cesta ke klíči",
+ "keyPathTooltip": "Úplná cesta položky registru, která obsahuje hodnotu jako požadavek",
+ "operator": "Operátor",
+ "operatorTooltip": "Vyberte operátor pro porovnání.",
+ "registryRequirement": "Požadavek klíče registru",
+ "registryRequirementTooltip": "Vyberte porovnání požadavků klíčů registrů.",
+ "valueName": "Název hodnoty",
+ "valueNameTooltip": "Název požadované hodnoty registru"
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Soubor",
+ "registry": "Registr",
+ "script": "Skript"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Logická hodnota",
+ "dateTime": "Datum a čas",
+ "float": "Plovoucí desetinná čárka",
+ "integer": "Celé číslo",
+ "string": "Řetězec",
+ "version": "Verze"
+ },
+ "duplicateName": "Název skriptu {0} se už používá. Zadejte prosím jiný název.",
+ "enforceSignatureCheck": "Vynutit kontrolu podpisu skriptu",
+ "enforceSignatureCheckTooltip": "Pokud chcete ověřit, že skript je podepsaný důvěryhodným vydavatelem, který umožní skriptu běžet bez toho, aby se zobrazovaly výzvy nebo upozornění, vyberte Ano. Skript se spustí neblokovaný. Pokud chcete skript spustit s potvrzením koncového uživatele, ale bez ověření podpisu, vyberte Ne (výchozí).",
+ "loggedOnCredentials": "Spustit tento skript pomocí přihlašovacích údajů přihlášeného uživatele",
+ "loggedOnCredentialsTooltip": "Spustit skript pomocí přihlašovacích údajů přihlášeného zařízení",
+ "operatorTooltip": "Vyberte operátor pro porovnání požadavků.",
+ "requirementMethod": "Vyberte typ výstupních dat.",
+ "requirementMethodTooltip": "Vyberte datový typ, který se použije při určování požadavku na shodu zjišťování.",
+ "scriptContent": "Obsah skriptu",
+ "scriptFile": "Soubor skriptu",
+ "scriptFileTooltip": "Vyberte powershellový skript, který zjistí přítomnost aplikace v klientovi. Když se aplikace zjistí, proces požadavku poskytne ukončovací kód s hodnotou 0 a zapíše řetězcovou hodnotu na STDOUT.",
+ "scriptName": "Název skriptu",
+ "value": "Hodnota",
+ "valueTooltip": "Vyberte hodnotu požadavku, která odpovídá vybrané metodě zjišťování. Metody zjišťování na základě data a času by se měly zadat v místním formátu."
+ },
+ "bladeTitle": "Přidat pravidlo požadavku",
+ "createRequirementHeader": "Vytvořit požadavek",
+ "header": "Nakonfigurovat další pravidla požadavků",
+ "label": "Pravidla dalších požadavků",
+ "noRequirementsSelectedPlaceholder": "Nezadaly se žádné požadavky.",
+ "requirementType": "Typ požadavku",
+ "requirementTypeTooltip": "Zvolte typ metody zjišťování, pomocí které se určí, jak se požadavek bude ověřovat."
+ },
+ "architectures": "Architektura operačního systému",
+ "architecturesTooltip": "Zvolte architektury potřebné k nainstalování aplikace",
+ "bladeTitle": "Požadavky",
+ "diskSpace": "Požadované místo na disku (MB)",
+ "diskSpaceTooltip": "Požadované volné místo na systémové jednotce, aby se aplikace mohla nainstalovat",
+ "header": "Zadejte požadavky, které zařízení musí splnit, než se aplikace nainstaluje:",
+ "maximumTextFieldValue": "Hodnota musí být maximálně {0}.",
+ "minimumCpuSpeed": "Minimální požadovaná rychlost CPU (MHz)",
+ "minimumCpuSpeedTooltip": "Minimální požadovaná rychlost CPU, aby se aplikace mohla nainstalovat",
+ "minimumLogicalProcessors": "Minimální požadovaný počet logických procesorů",
+ "minimumLogicalProcessorsTooltip": "Minimální požadovaný počet logických procesorů, aby se aplikace mohla nainstalovat",
+ "minimumOperatingSystem": "Minimální operační systém",
+ "minimumOperatingSystemTooltip": "Vyberte minimální operační systém potřebný k instalaci aplikace.",
+ "minumumTextFieldValue": "Hodnota musí být aspoň {0}.",
+ "physicalMemory": "Požadovaná fyzická paměť (MB)",
+ "physicalMemoryTooltip": "Požadovaná fyzická paměť (RAM), aby se aplikace mohla nainstalovat",
+ "selectorLabel": "Požadavky",
+ "validNumber": "Zadejte platné číslo."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filtr",
+ "assignmentFilterTypeColumnHeader": "Režim filtru",
+ "assignmentToast": "Oznámení koncovému uživateli",
+ "assignmentTypeTableHeader": "TYP PŘIŘAZENÍ",
+ "autoUpdate": "Automatická aktualizace",
+ "deadlineTimeColumnLabel": "Konečný termín instalace",
+ "deliveryOptimizationPriorityHeader": "Priorita optimalizace doručení",
+ "groupTableHeader": "Skupina",
+ "installContextLabel": "Kontext instalace",
+ "isRemovable": "Nainstalovat jako vyměnitelné",
+ "licenseTypeLabel": "Typ licence",
+ "modeTableHeader": "Režim skupiny",
+ "policySet": "Sada zásad",
+ "preventAutoAppUpdate": "Zabránit automatickým aktualizacím aplikací",
+ "preventManagedAppBackup": "Zabránit zálohování aplikace iCloud",
+ "restartGracePeriodHeader": "Období odkladu restartování",
+ "startTimeColumnLabel": "Dostupnost",
+ "tracks": "Stopy",
+ "uninstallOnRemoval": "Při odebrání zařízení odinstalovat",
+ "updateMode": "Priorita aktualizace",
+ "vPN": "Síť VPN"
+ },
+ "AppType": {
+ "aADWebApp": "Webová aplikace AAD",
+ "androidEnterpriseSystemApp": "Aplikace systému Android Enterprise",
+ "androidForWorkApp": "Aplikace spravovaného obchodu Google Play",
+ "androidLobApp": "Obchodní aplikace Android",
+ "androidStoreApp": "Aplikace z obchodu pro Android",
+ "builtInAndroid": "Integrovaná aplikace pro Android",
+ "builtInApp": "Integrovaná aplikace",
+ "builtInIos": "Integrovaná aplikace pro iOS",
+ "iosIPadOSWebClip": "Webový klip pro iOS/iPadOS",
+ "iosLobApp": "Obchodní aplikace iOS",
+ "iosStoreApp": "Aplikace z obchodu pro iOS",
+ "iosVppApp": "Aplikace iOS koupená přes Volume Purchase Program",
+ "lineOfBusinessApp": "Obchodní aplikace",
+ "macOSDmgApp": "Aplikace pro macOS (.DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Obchodní aplikace pro macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Sada Office pro macOS",
+ "macOSPkgApp": "Aplikace pro macOS (PKG)",
+ "macOSWebClip": "Webový klip pro macOS",
+ "macOsVppApp": "Aplikace macOS koupená přes Volume Purchase Program",
+ "managedAndroidLobApp": "Spravovaná obchodní aplikace Android",
+ "managedAndroidStoreApp": "Spravovaná aplikace z obchodu pro Android",
+ "managedGooglePlayApp": "Aplikace spravovaného obchodu Google Play",
+ "managedGooglePlayPrivateApp": "Privátní aplikace spravovaného obchodu Google Play",
+ "managedGooglePlayWebApp": "Webový odkaz spravovaného obchodu Google Play",
+ "managedIosLobApp": "Spravovaná obchodní aplikace iOS",
+ "managedIosStoreApp": "Spravovaná aplikace z obchodu pro iOS",
+ "microsoftStoreForBusinessApp": "Aplikace pro Microsoft Store pro firmy",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store pro firmy",
+ "officeAddIn": "Doplněk pro Office",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 a novější)",
+ "sharePointApp": "Aplikace SharePoint",
+ "teamsApp": "Aplikace Teams",
+ "webApp": "Webový odkaz",
+ "win32CatalogApp": "Katalogová aplikace Windows (Win32)",
+ "winGetPublicApp": "Úložiště komunity Správce balíčků systému Windows",
+ "winGetStoreApp": "Aplikace Microsoft Store (nová verze)",
+ "windowsAppXLobApp": "Obchodní aplikace Windows AppX",
+ "windowsClassicApp": "Aplikace pro Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 a novější)",
+ "windowsMobileMsiLobApp": "Obchodní aplikace Windows MSI",
+ "windowsPhone81AppXBundleLobApp": "Obchodní aplikace Windows Phone 8.1 AppX",
+ "windowsPhone81AppXLobApp": "Obchodní aplikace Windows Phone 8.1 AppX",
+ "windowsPhone81StoreApp": "Aplikace pro Windows Phone 8.1 Store",
+ "windowsPhoneXapLobApp": "Obchodní aplikace Windows Phone XAP",
+ "windowsStoreApp": "Aplikace Microsoft Store (starší verze)",
+ "windowsUniversalAppXLobApp": "Obchodní aplikace Windows Universal AppX",
+ "windowsUniversalLobApp": "Univerzální obchodní aplikace pro Windows",
+ "windowsWebApp": "Webový odkaz Windows"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Vyloučené",
+ "include": "Zahrnuté",
+ "includeAllDevicesVirtualGroup": "Zahrnuté",
+ "includeAllUsersVirtualGroup": "Zahrnuté"
+ },
+ "AssignmentToast": {
+ "hideAll": "Skrýt všechny informační zprávy",
+ "showAll": "Zobrazit všechny informační zprávy",
+ "showReboot": "Zobrazit informační zprávy o restartování počítače"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Ano",
+ "notConfigured": "Ne"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Pozadí",
+ "displayText": "Stahování obsahu v {0}",
+ "foreground": "Popředí",
+ "header": "Priorita optimalizace doručení"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Instalace aplikace může vynutit restartování zařízení",
+ "basedOnReturnCode": "Určete chování na základě návratových kódů",
+ "force": "Intune vynutí povinné restartování zařízení",
+ "suppress": "Žádná konkrétní akce"
+ },
+ "FilterType": {
+ "exclude": "Vyloučit",
+ "include": "Zahrnout",
+ "none": "Žádné"
+ },
+ "InstallIntent": {
+ "available": "K dispozici zaregistrovaným zařízením",
+ "availableWithoutEnrollment": "K dispozici s registrací i bez ní",
+ "notApplicable": "Nelze použít",
+ "required": "Povinné",
+ "uninstall": "Odinstalovat"
+ },
+ "SettingType": {
+ "assignmentType": "Typ přiřazení",
+ "deviceLicensing": "Typ licence",
+ "installContext": "Při odebrání zařízení odinstalovat",
+ "toastSettings": "Oznámení koncovému uživateli",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Výchozí",
+ "postponed": "Odloženo",
+ "priority": "Vysoká priorita"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Selhalo",
+ "hardReboot": "Úplné restartování",
+ "retry": "Opakovat",
+ "softReboot": "Rychlé restartování",
+ "success": "Úspěch"
+ },
+ "Columns": {
+ "codeType": "Typ kódu",
+ "returnCode": "Návratový kód"
+ },
+ "bladeTitle": "Návratové kódy",
+ "gridAriaLabel": "Návratové kódy",
+ "header": "Zadejte návratové kódy, které určí chování po instalaci:",
+ "onAddAnnounceMessage": "Návratový kód přidal položku {0} z {1}",
+ "onDeleteSuccess": "Návratový kód {0} byl úspěšně odstraněn",
+ "returnCodeAlreadyUsedValidation": "Návratový kód se už používá.",
+ "returnCodeMustBeIntegerValidation": "Návratový kód by měl být celé číslo.",
+ "returnCodeShouldBeAtLeast": "Návratový kód by měl být nejméně {0}.",
+ "returnCodeShouldBeAtMost": "Návratový kód by měl být nejvíce {0}.",
+ "selectorLabel": "Návratové kódy"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone a iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Přidat ohraničení sítě",
+ "addNetworkBoundaryButton": "Přidat ohraničení sítě...",
+ "allowWindowsSearch": "Povolit ve Windows Search hledání šifrovaných podnikových dat a aplikací ze Storu",
+ "authoritativeIpRanges": "Seznam rozsahů podnikových IP adres je autoritativní (nedetekovat automaticky)",
+ "authoritativeProxyServers": "Seznam podnikových proxy serverů je autoritativní (nedetekovat automaticky)",
+ "boundaryType": "Typ ohraničení",
+ "cloudResources": "Cloudové prostředky",
+ "corporateIdentity": "Podniková identita",
+ "dataRecoveryCert": "Pokud chcete povolit obnovování šifrovaných dat, odešlete certifikát agenta obnovování dat (DRA).",
+ "editNetworkBoundary": "Upravit ohraničení sítě",
+ "enrollmentState": "Stav registrace",
+ "iPv4Ranges": "Rozsahy IPv4",
+ "iPv6Ranges": "Rozsahy IPv6",
+ "internalProxyServers": "Interní proxy servery",
+ "maxInactivityTime": "Maximální doba (v minutách), po kterou může zařízení zůstat neaktivní, než se zamkne PIN kódem nebo heslem",
+ "maxPasswordAttempts": "Počet povolených neúspěšných přihlášení, než se zařízení vymaže",
+ "mdmDiscoveryUrl": "Adresa URL zjišťování MDM",
+ "mdmRequiredSettingsInfo": "Tyto zásady platí jenom pro Windows 10 Anniversary Edition a vyšší. Ochranu nastavují pomocí Windows Information Protection (WIP).",
+ "minimumPinLength": "Nastavte minimální počet znaků vyžadovaných pro PIN kód.",
+ "name": "Název",
+ "networkBoundariesGridEmptyText": "Tady se budou zobrazovat všechna ohraničení sítě, která přidáte.",
+ "networkBoundary": "Ohraničení sítě",
+ "networkDomainNames": "Síťové domény",
+ "neutralResources": "Neutrální prostředky",
+ "passportForWork": "Používat Windows Hello pro firmy jako metodu přihlašování do Windows",
+ "pinExpiration": "Zadejte dobu (ve dnech), po kterou se PIN kód může používat, než bude systém vyžadovat, aby ho uživatel změnil.",
+ "pinHistory": "Zadejte počet předchozích PIN kódů přidružených k uživatelskému účtu, které se nedají použít znovu.",
+ "pinLowercaseLetters": "Nakonfigurujte využití malých písmen v PIN kódu Windows Hello pro firmy.",
+ "pinSpecialCharacters": "Nakonfigurujte využití speciálních znaků v PIN kódu Windows Hello pro firmy.",
+ "pinUppercaseLetters": "Nakonfigurujte využití velkých písmen v PIN kódu Windows Hello pro firmy.",
+ "protectUnderLock": "Bránit aplikacím v přístupu k podnikovým datům, pokud je zařízení uzamčené. Platí jenom pro Windows 10 Mobile.",
+ "protectedDomainNames": "Chráněné domény",
+ "proxyServers": "Proxy servery",
+ "requireAppPin": "Zakázat PIN kód aplikace, když je PIN kód zařízení spravovaný",
+ "requiredSettings": "Požadovaná nastavení",
+ "requiredSettingsInfo": "Když se změní obor nebo se odeberou tyto zásady, dešifrují se firemní data.",
+ "revokeOnMdmHandoff": "Odvolat přístup k chráněným datům, když se zařízení zaregistruje k MDM",
+ "revokeOnUnenroll": "Odvolat šifrovací klíče při zrušení registrace",
+ "rmsTemplateForEdp": "Zadejte ID šablony, která se má použít pro Azure RMS.",
+ "showWipIcon": "Zobrazit ikonu ochrany podnikových dat",
+ "type": "Typ",
+ "useRmsForWip": "Použít Azure RMS pro WIP",
+ "value": "Hodnota",
+ "weRequiredSettingsInfo": "Tyto zásady platí jenom pro Windows 10 Creators Update a vyšší. Ochranu nastavují pomocí Windows Information Protection (WIP) a Windows MAM.",
+ "wipProtectionMode": "Režim Windows Information Protection",
+ "withEnrollment": "S registrací",
+ "withoutEnrollment": "Bez registrace"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabština",
+ "bulgarian": "Bulharština",
+ "chineseSimplified": "Čínština (zjednodušená)",
+ "chineseTraditional": "Čínština (tradiční)",
+ "croatian": "Chorvatština",
+ "czech": "Čeština",
+ "danish": "Dánština",
+ "dutch": "Holandština",
+ "englishUK": "Angličtina (Spojené království)",
+ "englishUS": "Angličtina (Spojené státy)",
+ "estonian": "Estonština",
+ "finnish": "Finština",
+ "frenchCanada": "Francouzština (Kanada)",
+ "frenchFrance": "Francouzština (Francie)",
+ "german": "Němčina",
+ "greek": "Řečtina",
+ "hebrew": "Hebrejština",
+ "hungarian": "Maďarština",
+ "italian": "Italština",
+ "japanese": "Japonština",
+ "korean": "Korejština",
+ "latvian": "Lotyština",
+ "lithuanian": "Litevština",
+ "norwegian": "Norština (Bokmål)",
+ "polish": "Polština",
+ "portugueseBrazil": "Portugalština (Brazílie)",
+ "portuguesePortugal": "Portugalština (Portugalsko)",
+ "romanian": "Rumunština",
+ "russian": "Ruština",
+ "serbian": "Srbština",
+ "slovak": "Slovenština",
+ "slovenian": "Slovinština",
+ "spanishMexico": "Španělština (Mexiko)",
+ "spanishSpain": "Španělština (Španělsko)",
+ "swedish": "Švédština",
+ "thai": "Thajsko",
+ "turkish": "Turečtina",
+ "ukrainian": "Ukrajinština"
+ },
+ "Summary": {
+ "placeholder": "Vlevo vyberte oznámení a zobrazíte náhled obsahu."
+ },
+ "companyContact": "Zobrazit kontaktní informace",
+ "companyLogo": "Zobrazit logo společnosti",
+ "companyName": "Zobrazit název společnosti",
+ "createEditDescription": "Vytvořte nebo upravte šablony oznámení.",
+ "createMessage": "Vytvořit zprávu",
+ "deviceDetails": "Zobrazit podrobnosti o zařízení",
+ "deviceDetailsInfoBox": "Toto nastavení je ve výchozím nastavení vypnuté, protože načtení podrobností o zařízení může způsobit zpoždění příjmu e-mailových oznámení.",
+ "editImpactInfo": "Úprava této šablony oznámení bude mít vliv na všechny zásady, které tuto šablonu používají.",
+ "editMessage": "Upravit zprávu",
+ "email": "e-mail",
+ "emailFooterTitle": "Zápatí e-mailu",
+ "emailHeaderFooterInfo": "Nastavení záhlaví a zápatí e-mailu pro e-mailová oznámení závisí na nastavení přizpůsobení v uzlu správce tenanta ve Správci koncových bodů.",
+ "emailHeaderTitle": "Záhlaví e-mailu",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Konfigurovat nastavení přizpůsobení",
+ "formSubTitle": "Vytvořit nebo upravit e-maily s oznámením",
+ "headerFooterSettingsTab": "Nastavení záhlaví a zápatí",
+ "imgPreview": "Náhled obrázku",
+ "infotext": "Vyberte oznámení. Pokud chcete vytvořit nové oznámení, přejděte do Oznámení v části Správa v úloze Nastavit dodržování předpisů zařízením.",
+ "iwLink": "Zobrazit odkaz na web portálu společnosti",
+ "listEmpty": "Žádné šablony zpráv",
+ "listEmptySelectOnly": "Žádné šablony zpráv. Pokud chcete vytvořit nové oznámení, přejděte prosím na Oznámení v části Spravovat úlohy Nastavit dodržování předpisů zařízením.",
+ "listSubTitle": "Seznam šablon oznámení",
+ "listTitle": "Šablony oznámení",
+ "localizedNotificationMessageTemplates": "Lokalizované šablony oznámení",
+ "messageAssigned": "Tuto šablonu zpráv nejde odstranit, protože ji v tuto chvíli používají nejméně jedny zásady dodržování předpisů.",
+ "messageCapitalized": "Šablona zprávy oznámení",
+ "messageLowercase": "šablona zprávy oznámení",
+ "missingDefaultError": "Vybrat šablonu",
+ "notificationMessageTemplates": "Šablony oznámení",
+ "rowValidationError": "Vyžaduje se nejméně jedna šablona zprávy.",
+ "selectDescription": "Vyberte oznámení. Pokud chcete vytvořit nové oznámení, přejděte do Oznámení v části Spravovat v úloze Nastavit dodržování předpisů zařízením.",
+ "tenantValueText": "Hodnota tenanta",
+ "testEmailLabel": "Odeslat náhled e-mailu",
+ "localeLabel": "Národní prostředí",
+ "isDefaultLocale": "Je výchozí"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Nakonfigurujte zařízení pro počáteční zřízení.",
+ "title": "Příprava zařízení"
+ },
+ "EnrollmentSettings": {
+ "description": "Nakonfigurujte nastavení registrace, jako jsou blokování registrace a přiřazování k uživatelům.",
+ "title": "Nastavení registrace"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Nakonfigurujte nastavení, pomocí kterých můžou uživatelé obnovit Windows ze spouštěcího USB flash disku.",
+ "menuTitle": "Konfigurace obnovení operačního systému Windows"
+ },
+ "coManagementAuthorityDesc": "Konfigurovat nastavení spolusprávy pro integraci Configuration Manageru",
+ "coManagementAuthorityTitle": "Nastavení spolusprávy ",
+ "deploymentProfiles": "Profily nasazení Windows AutoPilot",
+ "description": "Informace o sedmi různých způsobech, jak můžou uživatelé nebo správci registrovat osobní počítač s Windows 10/11 v Intune.",
+ "descriptionLabel": "Metody registrace systému Windows",
+ "enrollmentStatusPage": "Stránka stavu registrace"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Vyberte počet bitů obsažených v klíči.",
+ "keyUsage": "Zadejte kryptografickou akci, která se vyžaduje k výměně veřejného klíče certifikátu.",
+ "renewalThreshold": "Zadejte procento (mezi 1 a 99 procenty) povolené zbývající živostnosti certifikátu, než zařízení může požádat o prodloužení jeho platnosti. Doporučená hodnota pro Intune je 20 %. (1-99)",
+ "rootCert": "Zvolte dříve nakonfigurovaný a přiřazený profil kořenového certifikátu CA. Certifikát CA musí odpovídat kořenovému certifikátu certifikační autority, která vystavila certifikát pro tento profil (ten, který v tuto chvíli konfigurujete).",
+ "scepServerUrl": "Zadejte adresu URL pro server NDES, který vystavuje certifikáty prostřednictvím SCEP (musí se jednat o HTTPS). Například https://contoso.com/certsrv/mscep/mscep.dll.",
+ "scepServerUrls": "Přidejte nejméně jednu adresu URL pro server NDES, který vystavuje certifikáty prostřednictvím SCEP (musí se jednat o HTTPS). Např. https://contoso.com/certsrv/mscep/mscep.dll.",
+ "subjectAlternativeName": "Alternativní název subjektu",
+ "subjectNameFormat": "Formát názvu subjektu",
+ "validityPeriod": "Čas zbývající do vypršení platnosti certifikátu. Zadejte hodnotu, která je nižší nebo rovna období platnosti, které se zobrazuje v šabloně certifikátu. Výchozí hodnota je nastavená na jeden rok."
+ },
+ "appInstallContext": "Tato možnost určuje kontext instalace, který se přidruží k této aplikaci. U aplikací v duálním režimu vyberte požadovaný kontext pro tuto aplikaci. Pro všechny ostatní aplikace se tato hodnota vybere předem podle balíčku a nedá se upravit.",
+ "autoUpdateMode": "Nakonfigurujte prioritu aktualizace pro aplikaci. Vyberte „Výchozí“, pokud chcete vyžadovat, aby bylo zařízení před aktualizací aplikace připojeno k síti Wi-Fi, nabíjelo se a nebylo aktivně používáno. Vyberte „Vysoká priorita“, pokud se má aplikace aktualizovat hned, jakmile vývojář aplikaci publikuje, bez ohledu na stav nabíjení, připojení k síti Wi-Fi nebo aktivitu koncového uživatele na zařízení. Výběrem možnosti Odloženo zrušíte aktualizace aplikací až na 90 dní. Vysoká priorita a odložení se projeví pouze u zařízení DO.",
+ "configurationSettingsFormat": "Text formátu nastavení konfigurace",
+ "ignoreVersionDetection": "Pro aplikace, které automaticky aktualizuje jejich vývojář (třeba Google Chrome), nastavte tuto možnost na Ano.",
+ "ignoreVersionDetectionMacOSLobApp": "Vyberte Ano pro aplikace, které vývojář aplikace aktualizuje automaticky, nebo pro kontrolu bundleID aplikace před instalací. Pokud chcete před instalací zkontrolovat bundleID i číslo verze aplikace, vyberte možnost Ne.",
+ "installAsManagedMacOSLobApp": "Toto nastavení se použije jenom na macOS 11 a vyšší. V macOS 10.15 a nižším se aplikace nainstaluje, ale nebude spravovaná.",
+ "installContextDropdown": "Vyberte příslušný kontext instalace. Kontext uživatele nainstaluje aplikaci jen pro cílové uživatele, kdežto kontext zařízení nainstaluje aplikaci pro všechny uživatele daného zařízení.",
+ "ldapUrl": "Toto je název hostitele protokolu LDAP, kde můžu klienti získat veřejné šifrovací klíče pro příjemce e-mailů. E-maily se zašifrují, když je k dispozici klíč. Podporované formáty:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Vyberte oprávnění modulu runtime pro přidružené aplikace.",
+ "policyAssociatedApp": "Vyberte aplikaci, ke které se tyto zásady přidruží.",
+ "policyConfigurationSettings": "Vyberte metodu, pomocí které chcete definovat nastavení konfigurace těchto zásad.",
+ "policyDescription": "Případně můžete také zadat popis těchto zásad konfigurace.",
+ "policyEnrollmentType": "Určete, jestli se tato nastavení mají spravovat prostřednictvím správy zařízení, nebo aplikací vytvořených s použitím sady Intune SDK.",
+ "policyName": "Zadejte název zásad konfigurace.",
+ "policyPlatform": "Vyberte platformu, které se budou tyto zásady konfigurace aplikací týkat.",
+ "policyProfileType": "Vyberte typy profilů zařízení, na které se bude tento konfigurační profil aplikace vztahovat",
+ "policySMime": "Nakonfigurujte nastavení šifrování a podepisování S/MIME pro Outlook.",
+ "sMimeDeployCertsFromIntune": "Zadejte, jestli se z Intune budou doručovat certifikáty S/MIME, aby se mohly používat v Outlooku.\r\nIntune může automaticky nasazovat podpisové a šifrovací certifikáty uživatelům přes Portál společnosti.",
+ "sMimeEnable": "Zadejte, jestli se při vytváření e-mailu povolí ovládací prvky S/MIME.",
+ "sMimeEnableAllowChange": "Určuje, jestli uživatel může měnit nastavení Povolit standard S/MIME.",
+ "sMimeEncryptAllEmails": "Zadejte, jestli musí být všechny e-maily šifrované, nebo ne.\r\nŠifrování převádí data na šifrovaný text, aby si je mohl přečíst jen zamýšlený příjemce.",
+ "sMimeEncryptAllEmailsAllowChange": "Určuje, jestli uživatel může měnit nastavení Šifrovat všechny e-maily.",
+ "sMimeEncryptionCertProfile": "Zadejte profil certifikátu pro šifrování e-mailů.",
+ "sMimeSignAllEmails": "Zadejte, jestli musí být všechny e-maily podepsané.\r\nDigitální podpis ověřuje pravost e-mailu a zajišťuje, že se během přenosu nezmění jeho obsah.",
+ "sMimeSignAllEmailsAllowChange": "Určuje, jestli uživatel může měnit nastavení Podepsat všechny e-maily.",
+ "sMimeSigningCertProfile": "Zadejte profil certifikátu pro podepisování e-mailů.",
+ "sMimeUserNotificationType": "Způsob, jak uživatelům oznámit, že k získání certifikátů S/MIME pro Outlook musí otevřít Portál společnosti"
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "Profil {0} je zahrnutý v jedné nebo více sadách zásad. Pokud profil {0} odstraníte, nebudete už jej moct přiřazovat prostřednictvím těchto sad zásad. Chcete jej přesto odstranit?",
+ "contentWithError": "{0} by mohla být zahrnutá v jedné nebo více sadách zásad. Pokud {0} odstraníte, nebudete už ji moct přiřazovat prostřednictvím těchto sad zásad. Chcete ji přesto odstranit?",
+ "header": "Opravdu chcete odstranit toto omezení?"
+ },
+ "DeviceLimit": {
+ "description": "Zadejte maximální počet zařízení, která uživatel může zaregistrovat.",
+ "header": "Omezení limitů počtů zařízení",
+ "info": "Definujte, kolik zařízení může každý uživatel zaregistrovat."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Musí být 1.0 nebo vyšší.",
+ "android": "Zadejte platné číslo verze. Příklady: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Zadejte platné číslo verze. Příklady: 5.0, 5.1.1",
+ "iOS": "Zadejte platné číslo verze. Příklady: 9.0, 10.0, 9.0.2",
+ "mac": "Zadejte platné číslo verze. Příklady: 10, 10.10, 10.10.1",
+ "min": "Minimum nemůže být menší než {0}.",
+ "minMax": "Minimální verze nemůže být větší než maximální verze.",
+ "windows": "Musí být 10.0 nebo vyšší. Pokud chcete povolit zařízení 8.1, nechejte pole prázdné.",
+ "windowsMobile": "Musí být 10.0 nebo vyšší. Pokud chcete povolit zařízení 8.1, nechejte pole prázdné."
+ },
+ "allPlatformsBlocked": "Všechny platformy zařízení jsou zablokované. Pokud chcete povolit konfiguraci platforem, povolte jejich registraci.",
+ "blockManufacturerPlaceHolder": "Název výrobce",
+ "blockManufacturersHeader": "Zablokovaní výrobci",
+ "cannotRestrict": "Omezení se nepodporují.",
+ "configurationDescription": "Zadejte omezení konfigurace platformy, která se musí splnit, aby se zařízení zaregistrovalo. Po registraci můžete zařízení omezovat pomocí zásad dodržování předpisů. Verze definujte jako hlavníverze.podverze.build. Omezení verzí platí jenom pro zařízení registrovaná na Portálu společnosti. Intune standardně klasifikuje zařízení jako v osobním vlastnictví. Pokud se zařízení mají klasifikovat jako ve vlastnictví firmy, je nutná další akce.",
+ "configurationDescriptionLabel": "Další informace o nastavení omezení registrace",
+ "configurations": "Konfigurovat platformy",
+ "deviceManufacturer": "Výrobce zařízení",
+ "header": "Omezení typů zařízení",
+ "info": "Definujte, které platformy, verze a typy správy se můžou registrovat.",
+ "manufacturer": "Výrobce",
+ "max": "Maximum",
+ "maxVersion": "Maximální verze",
+ "min": "Minimum",
+ "minVersion": "Minimální verze",
+ "newPlatforms": "Povolili jste nové platformy. Zvažte možnost aktualizovat konfigurace platforem.",
+ "personal": "V osobním vlastnictví",
+ "platform": "Platforma",
+ "platformDescription": "Registraci můžete povolit pro následující platformy. Blokujte jenom ty platformy, které nebudete podporovat. Povolené platformy se dají konfigurovat prostřednictvím dalších omezení registrace.",
+ "platformSettings": "Nastavení platformy",
+ "platforms": "Vyberte platformy.",
+ "platformsSelected": "Počet vybraných platforem: {0}",
+ "type": "Typ",
+ "versions": "verze",
+ "versionsRange": "Povolit rozsah min/max:",
+ "windowsTooltip": "Omezí registrace prostřednictvím správy mobilních zařízení. Neomezí instalaci agentů počítačů. Podporují se jen verze Windows 10 a Windows 11. Pokud chcete povolit Windows 8.1, nechejte verze prázdné."
+ },
+ "Priority": {
+ "saved": "Priority omezení se úspěšně uložily."
+ },
+ "Row": {
+ "announce": "Priorita: {0}, název: {1}, přiřazené: {2}"
+ },
+ "Table": {
+ "deployed": "Nasazeno",
+ "name": "Název",
+ "priority": "Priorita"
+ },
+ "Type": {
+ "limit": "Omezení limitu počtu zařízení",
+ "type": "Omezení typu zařízení"
+ },
+ "allUsers": "Všichni uživatelé",
+ "androidRestrictions": "Omezení pro Android",
+ "create": "Vytvořit omezení",
+ "defaultLimitDescription": "Toto je výchozí omezení limitu počtu zařízení, které se s nejnižší prioritou používá pro všechny uživatele bez ohledu na členství ve skupině.",
+ "defaultTypeDescription": "Toto je výchozí omezení typu zařízení, které se s nejnižší prioritou používá pro všechny uživatele bez ohledu na členství ve skupině.",
+ "defaultWhfbDescription": "Toto je výchozí konfigurace Windows Hello pro firmy, která se s nejnižší prioritou používá pro všechny uživatele bez ohledu na členství ve skupině.",
+ "deleteMessage": "Ovlivnění uživatelé se omezí dalším přiřazeným omezením s nejvyšší prioritou. Pokud nejsou přiřazená žádná další omezení, použije se výchozí omezení.",
+ "deleteTitle": "Opravdu chcete odstranit omezení {0}?",
+ "descriptionHint": "Krátký odstavec s popisem využití v organizaci nebo úrovně omezení charakterizované nastavením omezení",
+ "edit": "Upravit omezení",
+ "info": "Zařízení musí dodržovat omezení registrace s nejvyšší prioritou, která se přiřadila jeho uživateli. Pokud chcete změnit prioritu omezení zařízení, můžete omezení přetáhnout. Výchozí omezení mají pro všechny uživatele nejnižší prioritu a spravují registrace bez uživatelů. Dají se upravit, ale ne odstranit.",
+ "iosRestrictions": "Omezení pro iOS",
+ "mDM": "MDM",
+ "macRestrictions": "Omezení pro macOS",
+ "maxVersion": "Maximální verze",
+ "minVersion": "Minimální verze",
+ "nameHint": "Toto bude primární atribut viditelný při identifikaci sady omezení.",
+ "noAssignmentsStatusBar": "Přiřaďte omezení k aspoň jedné skupině. Klikněte na Vlastnosti.",
+ "nonAdminForbiddenCreateError": "Abyste mohli vytvářet, upravovat nebo odstraňovat omezení, musíte být správcem služby Intune nebo globálním správcem.",
+ "nonAdminForbiddenEdit": "Abyste mohli upravovat omezení, musíte být správce.",
+ "notFound": "Omezení se nenašlo. Možná už se odstranilo.",
+ "personallyOwned": "Zařízení v osobním vlastnictví",
+ "restriction": "Omezení",
+ "restrictionLowerCase": "omezení",
+ "restrictionType": "Typ omezení",
+ "selectType": "Vyberte typ omezení.",
+ "selectValidation": "Vyberte prosím platformu.",
+ "typeHint": "Pokud chcete omezit vlastnosti zařízení, zvolte Omezení typu zařízení. Pokud chcete omezit počet zařízení na jednoho uživatele, zvolte Omezení limitu počtu zařízení.",
+ "typeRequired": "Typ omezení je povinný.",
+ "winPhoneRestrictions": "Omezení pro Windows Phone",
+ "windowsECv1Info": "Starší omezení registrace se nedají upravit ani se u nich nedá změnit priorita, dají se jenom odstranit.",
+ "windowsECv2Info": "Omezení registrace můžete upřednostnit přetažením. Níže si můžete zobrazit výchozí a předkonfigurovaná omezení. Všechna nová omezení registrace budou mít vyšší prioritu než výchozí a předkonfigurovaná omezení.",
+ "windowsRestrictions": "Omezení pro Windows",
+ "windowsRestrictionsPreview": "Omezení Windows založená na filtru (Preview)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 den",
+ "twoDays": "2 dny",
+ "zeroDays": "0 dnů"
+ },
+ "SecurityTemplate": {
+ "aSR": "Omezení možností útoku",
+ "accountProtection": "Ochrana účtu",
+ "allDevices": "Všechna zařízení",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Vytváření sestav antiviru (Preview)",
+ "conditionalAccess": "Podmíněný přístup",
+ "deviceCompliance": "Dodržování předpisů zařízením",
+ "diskEncryption": "Šifrování disku",
+ "eDR": "Zjišťování koncových bodů a odpověď",
+ "ePM": "Správa oprávnění koncového bodu",
+ "firewall": "Firewall",
+ "helpSupport": "Nápověda a podpora",
+ "setup": "Instalace",
+ "wdapt": "Microsoft Defender pro koncový bod"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Konfigurace ochrany dat"
+ },
+ "OrganizeMailByThread": {
+ "title": "Uspořádat poštu podle vlákna",
+ "tooltip": "Výchozím chováním v Outlooku je seskupit poštovní konverzace do zobrazení konverzace ve vláknech. Pokud se toto nastavení zakáže, Outlook zobrazí každou poštu samostatně a nebude ji seskupovat podle vlákna."
+ },
+ "Sync": {
+ "header": "Synchronizovat pole kontaktů s konfigurací aplikace nativních kontaktů"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení.",
+ "allowBiometricsTitle": "Pro přístup k aplikaci vyžadovat biometriku",
+ "allowBiometricsTooltip": "Aby uživatelé mohli přistupovat k aplikaci na svém zařízení, můžou se vyžadovat biometriky, třeba Touch ID nebo Face ID. Když se budou vyžadovat, použijí se jako doplněk metody ověřování vybrané v tomto profilu. Toto nastavení by se nemělo povolit, když jsou nasazené zásady ochrany aplikací Intune, protože zásady ochrany aplikací zahrnují požadavky na přístup, které se musí splnit před přístupem ke spravovaným datům. Když se povolí obě funkce, bude to mít za následek několik výzev pro přístup k Outlook Mobile. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Vypnuto.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení.",
+ "allowCalendarNotificationsTitle": "Oznámení kalendáře",
+ "allowCalendarNotificationsTooltip": "Umožní oznámením kalendáře zobrazovat úplné podrobnosti, když se nastavení Oznámení dat organizace v Zásadách ochrany aplikací nastaví na Zablokovat data organizace.",
+ "allowDefaultAppSignatureTitle": "Výchozí podpis aplikace",
+ "allowDefaultAppSignatureTooltip": "Výchozí podpis aplikace označuje, jestli aplikace použije jako výchozí podpis při vytváření zprávy text Získat Outlook pro iOS. Pokud se nastavení nakonfiguruje na Vypnuto, výchozí podpis se nebude používat. Uživatelé ale můžou přidat svůj vlastní. Když se možnost nastaví na Nenakonfigurováno, výchozí nastavení aplikace je Zapnuto.",
+ "allowExternalRecipientsMailTipTitle": "Tip pro e-mail Externí příjemci",
+ "allowExternalRecipientsMailTipTooltip": "Tip pro e-mail Externí příjemci se zobrazí, když odesílatel přidá příjemce, který je externí, nebo distribuční skupinu, která externí příjemce obsahuje. Tento tip pro e-mail informuje odesílatele, že zpráva, kterou vytvářejí, opustí organizaci. Díky tomu můžou zvolit správné formulace slov, tón a obsah. K dispozici jen pro účty Exchange Online a místní účty, které používají hybridní moderní ověřování. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto.",
+ "allowFocusedInboxTitle": "Prioritní doručená pošta",
+ "allowFocusedInboxTooltip": "Prioritní doručená pošta rozděluje doručenou poštu do dvou karet – Prioritní a Jiné. Vaše nejdůležitější e-maily se nacházejí na kartě Prioritní, zatímco ty ostatní zůstávají stále snadno přístupné na kartě Jiné, kde nikterak nepřekážejí. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení.",
+ "allowMailNotificationsTitle": "E-mailová upozornění",
+ "allowMailNotificationsTooltip": "Tato hodnota určuje, jestli Outlook povolí oznámení o poště. Když se nastaví na Ne, oznámení o poště se zakážou.",
+ "allowOrgDataOnWearablesTitle": "Data organizace na nositelných zařízeních",
+ "allowOrgDataOnWearablesTooltip": "Tato hodnota určuje, jestli se data Outlooku můžou synchronizovat s nositelným zařízením. Když se nastaví na Ne, synchronizace s nositelným zařízením se zakáže.",
+ "allowSaveContactsAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení synchronizace kontaktů.",
+ "allowSaveContactsTitle": "Uložit kontakty",
+ "allowSaveContactsTooltip": "Ukládání kontaktů do nativního adresáře mobilního zařízení umožňuje, aby se nové hovory a textové zprávy propojily s existujícími outlookovými kontakty uživatele. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Vypnuto.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení.",
+ "allowSmartReplyTitle": "Navrhované odpovědi",
+ "allowSmartReplyTooltip": "Když otevřete zprávu, Outlook pod ní může navrhnout odpovědi. Pokud vyberete nějakou navrhovanou odpověď, můžete ji před odesláním upravit. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto.",
+ "allowUserChangeGeneralToolTip": "Určuje, jestli uživatel může měnit nastavení.",
+ "allowUserChangeTitle": "Povolit uživateli měnit nastavení",
+ "blockExternalImagesAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení.",
+ "blockExternalImagesTitle": "Blokovat externí obrázky",
+ "blockExternalImagesTooltip": "Pokud je povoleno blokování externích obrázků, aplikace zabrání stahovat obrázky hostované na internetu, které jsou vložené do textu zprávy. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Vypnuto.",
+ "disableAddinsTitle": "Povolit doplňky",
+ "disableAddinsTooltip": "Zásady ochrany aplikací ve výchozím nastavení umožňují uživatelům využívat doplňky třetích stran, ale dají se použít k blokování doplňků pomocí nastavení Synchronizovat data aplikací spravovaných zásadami s nativními aplikacemi nebo doplňky. Když toto nastavení nakonfigurujete na Vypnuto, doplňky se zablokují, když je nastavení Zásady ochrany aplikací nastavené na Povoleno.",
+ "discoverFeedTitle": "Informační kanál Discover",
+ "discoverFeedTooltip": "Informační kanál Discover nabízí informace o nejčastěji používaných souborech Office. Standardně se tento kanál povoluje ve chvíli, kdy se pro daného uživatele povoluje Delve. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto.",
+ "enableSMIMETitle": "Povolit standard S/MIME",
+ "enableSMIMETooltip": "Zadejte, jestli se při vytváření e-mailu povolí ovládací prvky standardu S/MIME.",
+ "encryptAllEmails": "Šifrovat všechny e-maily",
+ "encryptAllEmailsAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení Šifrovat všechny e-maily.",
+ "encryptAllEmailsTooltip": "Zadejte, jestli musí být všechny e-maily šifrované. Šifrování převádí data na šifrovaný text, aby si je mohl přečíst jen zamýšlený příjemce.",
+ "ldapUrl": "URL protokolu LDAP",
+ "ldapUrlTooltip": "Toto je název hostitele LDAP, kde můžu klienti získat veřejné šifrovací klíče pro příjemce e-mailů. E-maily se zašifrují, když je k dispozici klíč. Podporované formáty: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení.",
+ "nativeCalendarSyncMAMOnlyTitle": "Povolit synchronizaci kalendáře",
+ "nativeCalendarSyncMAMOnlyTooltip": "Ve výchozím nastavení zásada ochrany aplikací povoluje synchronizaci kalendáře s nativní aplikací kalendáře, ale dá se použít blokování dostupnosti synchronizace kalendáře. Toto nastavení funguje nezávisle na nastavení zásady ochrany aplikací a umožňuje organizacím definovat, jestli bude synchronizace kalendáře k dispozici pro pracovní nebo školní účet.",
+ "nativeCalendarSyncTitle": "Synchronizovat kalendáře",
+ "nativeCalendarSyncTooltip": "Zásady ochrany aplikací ve výchozím nastavení umožňují synchronizaci kalendáře s nativní aplikací Kalendář, ale dají se použít k blokování dostupnosti synchronizace kalendáře pomocí nastavení Synchronizovat data aplikací spravovaných zásadami s nativními aplikacemi nebo doplňky. Když toto nastavení nakonfigurujete na Vypnuto, synchronizace kalendáře se zablokuje, když je nastavení Zásady ochrany aplikací nastavené na Povoleno.",
+ "playMyEmailsTitle": "Přehrát moje e-maily",
+ "playMyEmailsTooltip": "Funkce Přehrát moje e-maily není v aplikaci povolená ve výchozím nastavení, oprávněným uživatelům se ale nabízí prostřednictvím banneru v doručené poště. Když se tato funkce nastaví na hodnotu Vypnuto, nebude se v aplikaci oprávněným uživatelům nabízet. I tak si uživatelé můžou v aplikaci přehrávání e-mailů povolit ručně. Pokud je nastavená jako Není nakonfigurováno, je výchozí nastavení aplikace Zapnuto a funkce se bude oprávněným uživatelům nabízet.",
+ "signAllEmails": "Podepisovat všechny e-maily",
+ "signAllEmailsAllowUserChangeTooltip": "Určuje, jestli uživatel může měnit nastavení Podepsat všechny e-maily.",
+ "signAllEmailsTooltip": "Zadejte, jestli musí být všechny e-maily podepsané. Digitální podpis ověřuje pravost e-mailu a zajišťuje, že se během přenosu nezmění jeho obsah.",
+ "syncAddressTitle": "Adresa",
+ "syncAddressTooltip": "Tato hodnota určuje, jestli se adresa kontaktu má synchronizovat s nativními kontakty.",
+ "syncBirthdayTitle": "Datum narození",
+ "syncBirthdayTooltip": "Tato hodnota určuje, jestli se datum narození kontaktu má synchronizovat s nativními kontakty.",
+ "syncCompanyTitle": "Společnost",
+ "syncCompanyTooltip": "Tato hodnota určuje, jestli se název společnosti kontaktu má synchronizovat s nativními kontakty.",
+ "syncDepartmentTitle": "Oddělení",
+ "syncDepartmentTooltip": "Tato hodnota určuje, jestli se oddělení kontaktu má synchronizovat s nativními kontakty.",
+ "syncEmailAddressTitle": "E-mailová adresa",
+ "syncEmailAddressTooltip": "Tato hodnota určuje, jestli se e-mailová adresa kontaktu má synchronizovat s nativními kontakty.",
+ "syncInstantMessagingAddressTitle": "Adresa pro zasílání rychlých zpráv",
+ "syncInstantMessagingAddressTooltip": "Tato hodnota určuje, jestli se adresa kontaktu pro zasílání rychlých zpráv má synchronizovat s nativními kontakty.",
+ "syncJobTitleTitle": "Funkce",
+ "syncJobTitleTooltip": "Tato hodnota určuje, jestli se pracovní pozice kontaktu má synchronizovat s nativními kontakty.",
+ "syncNicknameTitle": "Přezdívka",
+ "syncNicknameTooltip": "Tato hodnota určuje, jestli se přezdívka kontaktu má synchronizovat s nativními kontakty.",
+ "syncNotesTitle": "Notes",
+ "syncNotesTooltip": "Tato hodnota určuje, jestli se poznámky kontaktu mají synchronizovat s nativními kontakty.",
+ "syncPhoneHomeFaxNumberTitle": "Telefonní číslo faxu domů",
+ "syncPhoneHomeFaxNumberTooltip": "Tato hodnota určuje, jestli se číslo faxu domů kontaktu má synchronizovat s nativními kontakty.",
+ "syncPhoneHomeNumberTitle": "Telefonní číslo domů",
+ "syncPhoneHomeNumberTooltip": "Tato hodnota určuje, jestli se telefonní číslo domů kontaktu má synchronizovat s nativními kontakty.",
+ "syncPhoneMobileNumberTitle": "Mobilní telefonní číslo",
+ "syncPhoneMobileNumberTooltip": "Tato hodnota určuje, jestli se mobilní telefonní číslo kontaktu má synchronizovat s nativními kontakty.",
+ "syncPhoneOtherNumberTitle": "Jiné telefonní číslo",
+ "syncPhoneOtherNumberTooltip": "Tato hodnota určuje, jestli se jiné telefonní číslo kontaktu má synchronizovat s nativními kontakty.",
+ "syncPhonePagerNumberTitle": "Telefonní číslo operátoru",
+ "syncPhonePagerNumberTooltip": "Tato hodnota určuje, jestli se telefonní číslo operátoru kontaktu má synchronizovat s nativními kontakty.",
+ "syncPhoneWorkFaxNumberTitle": "Telefonní číslo faxu do práce",
+ "syncPhoneWorkFaxNumberTooltip": "Tato hodnota určuje, jestli se číslo faxu do práce kontaktu má synchronizovat s nativními kontakty.",
+ "syncPhoneWorkNumberTitle": "Telefonní číslo do práce",
+ "syncPhoneWorkNumberTooltip": "Tato hodnota určuje, jestli se telefonní číslo do práce kontaktu má synchronizovat s nativními kontakty.",
+ "syncPrefixTitle": "Předpona názvu",
+ "syncPrefixTooltip": "Tato hodnota určuje, jestli se předpona jména kontaktu má synchronizovat s nativními kontakty.",
+ "syncSuffixTitle": "Přípona názvu",
+ "syncSuffixTooltip": "Tato hodnota určuje, jestli se přípona jména kontaktu má synchronizovat s nativními kontakty.",
+ "textPredictionsTitle": "Predikce textu",
+ "textPredictionsTooltip": "Aplikace Outlook může při psaní zpráv navrhovat slova a fráze. Když Outlook nabídne návrh, přijměte ho potáhnutím prstem. Když se nenakonfiguruje, bude ve výchozím nastavení aplikace nastavené na Zapnuté.",
+ "themesEnabledTitle": "Motivy jsou povolené",
+ "themesEnabledTooltip": "Určete, jestli může uživatel používat vlastní vizuální motiv."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Pomocí těchto nastavení si udržíte přehled o uživatelích, kteří si instalují aplikace, které nebyly schválené pro použití ve vaší firmě. Vyberte typ seznamu aplikací s omezeným přístupem:
\r\n Zakázané aplikace – seznam aplikací, při jejichž instalaci ze strany uživatelů chcete dostat zprávu \r\n Schválené aplikace – seznam aplikací, které jsou schválené pro použití ve vaší firmě. Když si uživatelé nainstalují aplikaci, která není v tomto seznamu, dostanete zprávu. \r\n ",
+ "androidZebraMxZebraMx": "Nakonfigurujte zařízení Zebra tak, že nahrajete profil MX ve formátu XML.",
+ "iosDeviceFeaturesAirprint": "Pomocí těchto nastavení nakonfigurujete zařízení s iOS tak, aby se automaticky připojila ke kompatibilním tiskárnám AirPrint ve vaší síti. Budete potřebovat IP adresu a cestu k prostředku těchto tiskáren.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Nakonfigurujte rozšíření aplikace, které povoluje jednotné přihlašování (SSO) pro zařízení s iOS 13.0 nebo novějším.",
+ "iosDeviceFeaturesHomeScreenLayout": "Nakonfigurujte rozložení dokovací a domovské obrazovky na zařízeních s iOS. Některá zařízení můžou mít omezený počet zobrazených položek.",
+ "iosDeviceFeaturesIOSWallpaper": "Zobrazí obrázek, který se bude zobrazovat na domovské nebo zamykací obrazovce zařízení s iOS.\r\n Pokud chcete, aby se na každém místě zobrazil jedinečný obrázek, vytvořte jeden profil s obrázkem zamykací obrazovky a jeden s obrázkem domovské obrazovky.\r\n Pak oba profily přiřaďte uživatelům.\r\n \r\n
\r\n
Maximální velikost souboru: 750 kB
\r\n
Typ souboru: PNG, JPG nebo JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Zadejte nastavení oznámení pro aplikace. Podporuje iOS 9.3 a novější.",
+ "iosDeviceFeaturesSharedDevice": "Zadejte nepovinný text, který se zobrazí na zamknuté obrazovce. Podporuje se v iOSu 9.3 a novějších. Další informace",
+ "iosGeneralApplicationRestrictions": "Pomocí těchto nastavení si udržíte přehled o uživatelích, kteří si instalují aplikace, které nebyly schválené pro použití ve vaší firmě. Vyberte typ seznamu aplikací s omezeným přístupem:
\r\n Zakázané aplikace – seznam aplikací, při jejichž instalaci ze strany uživatelů chcete dostat zprávu \r\n Schválené aplikace – seznam aplikací, které jsou schválené pro použití ve vaší firmě. Když si uživatelé nainstalují aplikaci, která není v tomto seznamu, dostanete zprávu. \r\n ",
+ "iosGeneralApplicationVisibility": "Pomocí seznamu zobrazených aplikací určete aplikace pro iOS, které může uživatel zobrazit nebo spustit. Pomocí seznamu skrytých aplikací určete aplikace pro iOS, které uživatel nemůže zobrazit ani spustit.",
+ "iosGeneralAutonomousSingleAppMode": "Aplikace, které přidáte do tohoto seznamu a přiřadíte k zařízení, můžou zařízení uzamknout tak, aby na něm po spuštění běžela jenom tato aplikace. Zařízení se dá zamknout i v případě, že na něm poběží určitá akce (třeba testování). Jakmile se akce dokončí nebo pokud odeberete toto omezení, zařízení se vrátí do normálního stavu.",
+ "iosGeneralKiosk": "Celoobrazovkový režim zamyká v zařízení různá nastavení nebo určuje jednu aplikaci, která na zařízení poběží. To může být užitečné v prostředích, jako je třeba obchod, kde chcete, aby na zařízení běžela jenom jedna ukázková aplikace.",
+ "macDeviceFeaturesAirprint": "Pomocí těchto nastavení můžete nakonfigurovat zařízení s macOSem tak, aby se automaticky připojovala k tiskárnám kompatibilním s AirPrintem ve vaší síti. Vaše tiskárny budou potřebovat IP adresu a cestu k prostředku.",
+ "macDeviceFeaturesAssociatedDomains": "Nakonfigurujte přidružené domény a můžete sdílet data a přihlašovací údaje mezi aplikacemi a weby organizace. Tento profil se dá použít u zařízení s operačním systémem macOS 10.15 nebo novějším.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Nakonfigurujte rozšíření aplikace, které povoluje jednotné přihlašování (SSO) pro zařízení s macOS 10.15 nebo novějším.",
+ "macDeviceFeaturesLoginItems": "Zvolte, které aplikace, soubory nebo složky se otevřou, když se uživatel přihlásí ke svým zařízením. Pokud nechcete, aby uživatel měnil, jak se vybrané aplikace budou otevírat, můžete aplikaci skrýt z konfigurace uživatele.",
+ "macDeviceFeaturesLoginWindow": "Nakonfigurujte zobrazování přihlašovací obrazovky macOS a funkcí, které jsou uživatelům k dispozici před a po přihlášení.",
+ "macExtensionsKernelExtensions": "Pomocí těchto nastavení můžete nakonfigurovat zásady rozšíření jádra na zařízeních s macOSem ve verzi 10.13.2 a novějších.",
+ "macGeneralDomains": "E-maily, které uživatel posílá nebo přijímá a které neodpovídají doménám zadaným tady, se označí jako nedůvěryhodné.",
+ "windows10EndpointProtectionApplicationGuard": "Když budete používat Microsoft Edge, Ochrana Application Guard v programu Microsoft Defender ochrání vaše prostředí před weby, které vaše organizace nedefinovala jako důvěryhodné. Když uživatelé navštíví weby, které nejsou uvedené v ohraničení vaší izolované sítě, otevřou se tyto weby ve virtuální relaci procházení v Hyper-V. Důvěryhodné weby se definují prostřednictvím ohraničení sítě, které se dá konfigurovat v Konfiguraci zařízení. Poznámka: Tato funkce je k dispozici jen pro zařízení s 64bitovým systémem Windows 10 nebo novějším.",
+ "windows10EndpointProtectionCredentialGuard": "Když se ochrana Credential Guard povolí, povolí se i tato povinná nastavení:\r\n \r\n
\r\n
Povolit zabezpečení na základě virtualizace: Povolí při příštím restartování zabezpečení na základě virtualizace (VBS). Zabezpečení na základě virtualizace nabízí podporu služeb zabezpečení pomocí hypervisoru Windows.
\r\n \r\n
Zabezpečené spouštění s přímým přístupem do paměti (DMA): Zapne VBS se zabezpečeným spouštěním a přímým přístupem do paměti (DMA).
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Zvolte další aplikace, které je potřeba auditovat pomocí Řízení aplikací v programu Microsoft Defender nebo které tento nástroj může považovat za důvěryhodné, aby bylo možné povolit jejich spuštění. Součásti systému Windows a všechny aplikace z obchodu Windows Store se za důvěryhodné považují automaticky.
\r\n Aplikace se nebudou blokovat, pokud se spustí v režimu Pouze audit. V tomto režimu se protokolují všechny události v protokolech místních klientů.\r\n ",
+ "windows10GeneralPrivacyPerApp": "Přidejte aplikace, které by měly mít jiné chování ochrany osobních údajů než to, které jste definovali ve výchozích zásadách.",
+ "windows10NetworkBoundaryNetworkBoundary": "Ohraničení sítě je seznam podnikových prostředků, třeba domén hostovaných v cloudu a rozsahů IP adres pro počítače umístěné v podnikové síti. Pokud chcete chránit data uložená v těchto umístěních pomocí zásad, definujte ohraničení sítě.",
+ "windowsHealthMonitoring": "Nakonfigurujte zásady monitorování stavu Windows.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone může uživatelům znemožnit instalaci nebo spuštění aplikací uvedených v seznamu zakázaných nebo aplikací, které nejsou uvedené v seznamu schválených. Všechny spravované aplikace musí být přidané do seznamu schválených."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Označit vybrané blokovací aplikace jako neúspěšné pouze ve fázi technika",
+ "apps": "aplikace",
+ "appsListName": "Seznam aplikací",
+ "blockingApps": "Blokovací aplikace",
+ "managedApps": "Spravované aplikace",
+ "noApps": "Žádné aplikace",
+ "noAppsError": "Při načítání aplikací došlo k chybě.",
+ "selectApps": "Vybrat aplikace",
+ "selectedAppsCount": "Počet vybraných aplikací (max. 100): {0}",
+ "useSelectedAppsAll": "Vše",
+ "useSelectedAppsSelected": "Vybráno",
+ "useSelectedAppsToggleLabel": "Zablokovat zařízení, dokud se požadované aplikace nenainstalují, pokud jsou přiřazené k uživateli nebo zařízení"
+ },
+ "Header": {
+ "application": "Aplikace",
+ "publisher": "Vydavatel",
+ "version": "Verze"
+ },
+ "SearchBox": {
+ "ariaLabel": "Hledat aplikace",
+ "placeHolder": "Hledat podle názvu nebo vydavatele"
+ },
+ "allowToUseToggle": "Povolit uživatelům používat zařízení, když dojde k chybě instalace",
+ "blockToggle": "Zablokovat používání zařízení, dokud se nenainstalují všechny aplikace a profily",
+ "blockToolTip": "Pokud například do tohoto seznamu přidáte Microsoft Word, nebudou moct cíloví uživatelé a zařízení opustit stránku stavu registrace, dokud se Word úspěšně nenainstaluje.",
+ "collectLogToggle": "Zapnout shromažďování protokolů a stránku diagnostiky pro koncové uživatele",
+ "create": "Vytvořit profil",
+ "customMessageTextBox": "Chybová zpráva",
+ "customMessageToggle": "Zobrazit vlastní zprávu, když dojde k časovému limitu nebo chybě",
+ "enableForAutopilotOnlyToggle": "Stránku zobrazit jenom pro zařízení, která jsou zřízena pomocí prostředí prvního spuštění (OOBE)",
+ "installQualityUpdatesToggle": "Nainstalovat aktualizace pro zvýšení kvality Windows (zařízení se může restartovat) (Preview)",
+ "progressToggle": "Zobrazit průběh konfigurace aplikací a profilů",
+ "resetToggle": "Povolit uživatelům resetovat zařízení, když dojde k chybě instalace",
+ "timeout": "Zobrazit chybu, pokud instalace trvá déle než zadaný počet minut"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Vlastnost",
+ "rule": "Pravidlo",
+ "ruleDetails": "Podrobnosti pravidla",
+ "value": "Hodnota"
+ },
+ "assignIf": "Přiřadit profil, pokud",
+ "deleteWarning": "Tato akce odstraní vybrané pravidlo použitelnosti.",
+ "dontAssignIf": "Nepřiřazovat profil, pokud",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "a ještě {0}",
+ "instructions": "Zadejte, jak se tento profil má použít v přiřazené skupině. Intune použije profil jen pro zařízení, která splňují kombinaci kritérií danou těmito pravidly.",
+ "maxText": "Maximum",
+ "minText": "Minimum",
+ "noActionRow": "Nezadala se žádná pravidla použitelnosti.",
+ "oSVersion": "např. 1.2.3.4",
+ "toText": "do",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic pro firmy",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "Edice operačního systému",
+ "windows10OsVersion": "Verze OS",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Povolit uživateli měnit nastavení",
+ "tooltip": "Určuje, jestli uživatel může měnit nastavení."
+ },
+ "AllowWorkAccounts": {
+ "title": "Povolit pouze pracovní nebo školní účty",
+ "tooltip": " Když povolíte toto nastavení, uživatelé si nebudou moci do Outlooku přidat osobní e-mailový účet a účet úložiště. Pokud má uživatel v Outlooku přidaný osobní účet, zobrazí se mu výzva k jeho odebrání. Pokud uživatel osobní účet neodebere, nebude možné přidat pracovní nebo školní účet."
+ },
+ "BlockExternalImages": {
+ "title": "Blokovat externí obrázky",
+ "tooltip": "Pokud je povoleno blokování externích obrázků, aplikace zabrání stahovat obrázky hostované na internetu, které jsou vložené do textu zprávy. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Vypnuto."
+ },
+ "ConfigureEmail": {
+ "title": "Konfigurovat nastavení e-mailového účtu"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Výchozí podpis aplikace označuje, jestli aplikace použije jako výchozí podpis při vytváření zprávy text Získat Outlook pro Android. Pokud se nastavení nakonfiguruje na Vypnuto, výchozí podpis se nebude používat. Uživatelé ale můžou přidat svůj vlastní.\r\n\r\nKdyž se možnost nastaví na Nenakonfigurováno, výchozí nastavení aplikace se nastaví na Zapnuto.",
+ "iOS": "Výchozí podpis aplikace označuje, jestli aplikace použije jako výchozí podpis při vytváření zprávy text Získat Outlook pro iOS. Pokud se nastavení nakonfiguruje na Vypnuto, výchozí podpis se nebude používat. Uživatelé ale můžou přidat svůj vlastní.\r\n\r\nKdyž se možnost nastaví na Nenakonfigurováno, výchozí nastavení aplikace se nastaví na Zapnuto."
+ },
+ "title": "Výchozí podpis aplikace"
+ },
+ "OfficeFeedReplies": {
+ "title": "Informační kanál Discover",
+ "tooltip": "Informační kanál Discover nabízí informace o nejčastěji používaných souborech Office. Standardně se tento kanál povoluje ve chvíli, kdy se pro daného uživatele povoluje Delve. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto."
+ },
+ "OrganizeMailByThread": {
+ "title": "Uspořádat poštu podle vlákna",
+ "tooltip": "Výchozím chováním v Outlooku je seskupit poštovní konverzace do zobrazení konverzace ve vláknech. Pokud se toto nastavení zakáže, Outlook zobrazí každou poštu samostatně a nebude ji seskupovat podle vlákna."
+ },
+ "PlayMyEmails": {
+ "title": "Přehrát moje e-maily",
+ "tooltip": "Funkce Přehrát moje e-maily není v aplikaci povolená ve výchozím nastavení, oprávněným uživatelům se ale nabízí prostřednictvím banneru v doručené poště. Když se tato funkce nastaví na hodnotu Vypnuto, nebude se v aplikaci oprávněným uživatelům nabízet. I tak si uživatelé můžou v aplikaci přehrávání e-mailů povolit ručně. Pokud je nastavená jako Není nakonfigurováno, je výchozí nastavení aplikace Zapnuto a funkce se bude oprávněným uživatelům nabízet."
+ },
+ "SuggestedReplies": {
+ "title": "Navrhované odpovědi",
+ "tooltip": "Když otevřete zprávu, Outlook pod ní může navrhnout odpovědi. Pokud vyberete nějakou navrhovanou odpověď, můžete ji před odesláním upravit."
+ },
+ "SyncCalendars": {
+ "title": "Synchronizovat kalendáře",
+ "tooltip": "Umožňuje nakonfigurovat, jestli uživatelé můžou synchronizovat svůj kalendář Outlooku s nativní aplikací a databází kalendáře."
+ },
+ "TextPredictions": {
+ "title": "Predikce textu",
+ "tooltip": "Aplikace Outlook může při psaní zpráv navrhovat slova a fráze. Když Outlook nabídne návrh, přijměte ho potáhnutím prstem. Když se nenakonfiguruje, bude ve výchozím nastavení aplikace nastavené na Zapnuté."
+ },
+ "ThemesEnabled": {
+ "title": "Motivy jsou povolené",
+ "tooltip": "Určete, jestli může uživatel používat vlastní vizuální motiv."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "Zařízení ChromeOS"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Kontakty správce",
+ "appPackaging": "Balení aplikace",
+ "autopatchGroups": "Skupiny automatických oprav",
+ "devices": "Zařízení",
+ "featureEnablement": "Aktivace funkce",
+ "feedback": "Zpětná vazba",
+ "gettingStarted": "Začínáme",
+ "messages": "Zprávy",
+ "onlineResources": "Prostředky online",
+ "policyHealth": "Stav zásad",
+ "policyHealthPreview": "Stav zásad (Preview)",
+ "releaseManagement": "Správa verzí",
+ "serviceRequests": "Žádosti o služby",
+ "settings": "Nastavení",
+ "supportRequests": "Žádosti o podporu",
+ "tenantEnrollment": "Registrace tenanta",
+ "tenantManagement": "Správa tenanta"
+ },
+ "actions": "Akce při nedodržení předpisů",
+ "advancedExchangeSettings": "Nastavení Exchange Online",
+ "advancedThreatProtection": "Microsoft Defender pro koncový bod",
+ "allApps": "Všechny aplikace",
+ "allDevices": "Všechna zařízení",
+ "androidFotaDeployments": "Nasazení Android FOTA",
+ "appBundles": "Sady prostředků aplikace",
+ "appCategories": "Kategorie aplikací",
+ "appConfigPolicies": "Zásady konfigurace aplikací",
+ "appConfigurationStatus": "Stav konfigurace aplikace",
+ "appInstallStatus": "Stav instalace aplikace",
+ "appLicences": "Licence aplikací",
+ "appProtectionPolicies": "Zásady ochrany aplikací",
+ "appProtectionStatus": "Stav ochrany aplikace",
+ "appSelectiveWipe": "Selektivní vymazání aplikace",
+ "appleVppTokens": "Tokeny Apple VPP",
+ "apps": "Aplikace",
+ "assign": "Přiřazení",
+ "assignedPermissions": "Přiřazená oprávnění",
+ "assignedRoles": "Přiřazené role",
+ "autopilotDeploymentReport": "Nasazení Autopilot (Preview)",
+ "autopilotDeploymentReportV2": "Nasazení Autopilota 2.0 (Preview)",
+ "brandingAndCustomization": "Přizpůsobení",
+ "cartProfiles": "Profily košíků",
+ "certificateConnectors": "Konektory certifikátů",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Zařízení připojená cloudem (Preview)",
+ "cloudPcActions": "Akce cloudového počítače Cloud PC (Preview)",
+ "cloudPcMaintenanceWindows": "Časová období údržby Cloud PC (Preview)",
+ "compliancePolicies": "Zásady dodržování předpisů",
+ "complianceScriptManagement": "Skripty",
+ "complianceScriptManagementPreview": "Skripty (Preview)",
+ "complianceSettings": "Nastavení zásad dodržování předpisů",
+ "conditionStatements": "Příkazy podmínek",
+ "conditions": "Umístění",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Konfigurační profily",
+ "configurationScripts": "Konfigurační skripty",
+ "connectorsAndTokens": "Konektory a tokeny",
+ "corporateDeviceIdentifiers": "Identifikátory podnikových zařízení",
+ "customAttributes": "Vlastní atributy",
+ "customAttributesMacOS": "Vlastní atributy pro macOS",
+ "customNotifications": "Vlastní oznámení",
+ "deploymentSettings": "Nastavení nasazení",
+ "derivedCredentials": "Odvozené přihlašovací údaje",
+ "deviceActions": "Akce zařízení",
+ "deviceCategories": "Kategorie zařízení",
+ "deviceCleanUp": "Pravidla čištění zařízení",
+ "deviceEnrollmentManagers": "Správci registrace zařízení",
+ "deviceExecutionStatus": "Stav zařízení",
+ "deviceLimitEnrollmentRestrictions": "Omezení limitu zařízení pro registraci",
+ "deviceTypeEnrollmentRestrictions": "Omezení platformy zařízení pro registraci",
+ "devices": "Zařízení",
+ "discoveredApps": "Zjištěné aplikace",
+ "edgePolicies": "Zásady pro Microsoft Edge",
+ "embeddedSIM": "Mobilní profily eSIM (Preview)",
+ "enrollDevices": "Registrovat zařízení",
+ "enrollmentFailures": "Neúspěšné registrace",
+ "enrollmentNotifications": "Oznámení o registraci (Preview)",
+ "enrollmentRestrictions": "Omezení registrace",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Konektory služby Exchange",
+ "failuresForCumulativeQualityUpdates": "Selhání kumulativní aktualizace pro zvýšení kvality pro Windows",
+ "failuresForDriverUpdates": "Selhání aktualizace ovladače systému Windows",
+ "failuresForFeatureUpdates": "Chyby aktualizace funkcí",
+ "failuresForQualityUpdates": "Selhání urychlené aktualizace systému Windows",
+ "featureFlighting": "Publikování testovacích verzí funkcí",
+ "featureUpdateDeployments": "Aktualizace funkcí pro Windows 10 a novější",
+ "flighting": "Publikování testovacích verzí",
+ "fotaUpdate": "Aktualizace FOTA",
+ "groupPolicy": "Šablony pro správu",
+ "groupPolicyAnalytics": "Analýza zásad skupiny",
+ "helpSupport": "Nápověda a podpora",
+ "helpSupportReplacement": "Nápověda a podpora ({0})",
+ "iOSAppProvisioning": "Zřizovací profily aplikací pro iOS",
+ "incompleteUserEnrollments": "Nedokončené registrace uživatele",
+ "iosUpdates": "Aktualizace pro iOS/iPadOS",
+ "legacyPcManagement": "Starší verze správy počítače",
+ "macOSSoftwareUpdate": "Aktualizace pro macOS",
+ "macOSSoftwareUpdateAccountSummaries": "Stav instalace pro zařízení s macOSem",
+ "macOSSoftwareUpdateCategorySummaries": "Souhrn aktualizací softwaru",
+ "macOSSoftwareUpdateStateSummaries": "aktualizace",
+ "managedGooglePlay": "Spravovaný obchod Google Play",
+ "msfb": "Microsoft Store pro firmy",
+ "myPermissions": "Moje oprávnění",
+ "notifications": "Oznámení",
+ "officeApps": "Aplikace Office",
+ "officeProPlusPolicies": "Zásady pro aplikace Office",
+ "onPremise": "Místní",
+ "onPremisesConnector": "Exchange ActiveSync On-premises Connector",
+ "onPremisesDeviceAccess": "Zařízení Exchange ActiveSync",
+ "onPremisesManageAccess": "Přístup k místnímu Exchangi",
+ "outOfDateIosDevices": "Chyby instalace pro zařízení s iOSem",
+ "overview": "Přehled",
+ "partnerDeviceManagement": "Správa partnerského zařízení",
+ "perUpdateRingDeploymentState": "Stav nasazení podle kruhu aktualizace",
+ "permissions": "Oprávnění",
+ "platformApps": "Počet aplikací: {0}",
+ "platformDevices": "Zařízení {0}",
+ "platformEnrollment": "Registrace {0}",
+ "policies": "Zásady",
+ "profiles": "Profily",
+ "properties": "Vlastnosti",
+ "reports": "Sestavy",
+ "retireNoncompliantDevices": "Vyřadit zařízení nesplňující požadavky",
+ "retireNoncompliantDevicesPreview": "Vyřazení zařízení nesplňujících požadavky (Preview)",
+ "role": "Role",
+ "scriptManagement": "Skripty",
+ "securityBaselines": "Standardní hodnoty zabezpečení",
+ "serviceToServiceConnector": "Konektor Exchange Online",
+ "servicenowConnector": "Konektor ServiceNow",
+ "shellScripts": "Skripty prostředí",
+ "teamViewerConnector": "Konektor pro TeamViewer",
+ "telecomeExpenseManagement": "Služba TEM (Telecom Expense Management)",
+ "tenantAdmin": "Správce tenanta",
+ "tenantAdministration": "Správa tenanta",
+ "termsAndConditions": "Podmínky a ujednání",
+ "titles": "Názvy",
+ "troubleshoot": "Odstranit potíže",
+ "troubleshootSupport": "Řešení problémů a podpora",
+ "user": "Uživatel",
+ "userExecutionStatus": "Stav uživatele",
+ "wdacSupplementalPolicies": "Doplňkové zásady režimu S",
+ "win32CatalogUpdateApp": "Aktualizace pro aplikace správy podnikových aplikací",
+ "win32CatalogUpdateAppInPreview": "Aktualizace pro katalogové aplikace pro Windows (Win32) (Preview)",
+ "win32CatalogUpdateAppPreviewTitle": "Aplikace Katalog podnikových aplikací s aktualizacemi (Preview)",
+ "win32CatalogUpdateAppTitle": "Aplikace Katalog podnikových aplikací s aktualizacemi",
+ "windows10DriverUpdate": "Aktualizace ovladačů pro systém Windows 10 a novější",
+ "windows10QualityUpdate": "Aktualizace kvality pro Windows 10 a novější",
+ "windows10UpdateRings": "Aktualizační okruhy pro Windows 10 a novější",
+ "windows10XPolicyFailures": "Selhání zásad Windows 10X",
+ "windows365PartnerConnector": "Partnerské konektory pro Windows 365",
+ "windowsDiagnosticData": "Data Windows",
+ "windowsEnterpriseCertificate": "Certifikát Windows Enterprise",
+ "windowsManagement": "Skripty",
+ "windowsSideLoadingKeys": "Klíče pro instalaci bokem ve Windows",
+ "windowsSymantecCertificate": "Certifikát Windows DigiCert",
+ "windowsThreatReport": "Stav agenta hrozeb"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Povolit uživatelům otevírat data z vybraných služeb",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Vyberte počet předchozích hodnot kódu PIN, které se mají zachovat"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "Pro všechny zásady dodržování předpisů se vyžaduje jedna akce bloku.",
- "graceperiod": "Plán (dny po nedodržení)",
- "graceperiodInfo": "Zadejte počet dnů po nedodržování předpisů, po jejichž uplynutí by měla být pro zařízení uživatele aktivována tato akce.",
- "subtitle": "Zadejte parametry akce.",
- "title": "Parametry akce"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Zpřístupnit uživatelům jako volitelnou aktualizaci",
+ "optionalValue": "Volitelné",
+ "required": "Zpřístupnit uživatelům jako povinnou aktualizaci",
+ "requiredValue": "Povinné"
},
- "List": {
- "gracePeriodDay": "{0} den po nedodržení",
- "gracePeriodDays": "{0} dny (dnů) po nedodržení",
- "gracePeriodHour": "Počet hodin po nedodržení předpisů: {0}",
- "gracePeriodHours": "Počet hodin po nedodržení předpisů: {0}",
- "gracePeriodMinute": "Počet minut po nedodržení předpisů: {0}",
- "gracePeriodMinutes": "Počet minut po nedodržení předpisů: {0}",
- "immediately": "Okamžitě",
- "schedule": "Plán",
- "scheduleInfoBalloon": "Dny po nedodržení předpisů",
- "subtitle": "Zadejte sekvenci akcí pro zařízení nedodržující předpisy.",
- "title": "Akce"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Aplikace systému Android Enterprise",
+ "androidForWorkApp": "Aplikace spravovaného obchodu Google Play",
+ "androidLobApp": "Obchodní aplikace Android",
+ "androidStoreApp": "Aplikace z obchodu pro Android",
+ "builtInAndroid": "Integrovaná aplikace pro Android",
+ "builtInApp": "Integrovaná aplikace",
+ "builtInIos": "Integrovaná aplikace pro iOS",
+ "default": "",
+ "iosIPadOSWebClip": "Webový klip pro iOS/iPadOS",
+ "iosLobApp": "Obchodní aplikace iOS",
+ "iosStoreApp": "Aplikace z obchodu pro iOS",
+ "iosVppApp": "Aplikace iOS koupená přes Volume Purchase Program",
+ "lineOfBusinessApp": "Obchodní aplikace",
+ "macOSDmgApp": "Aplikace pro macOS (.DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Obchodní aplikace pro macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Aplikace Microsoft 365 (macOS)",
+ "macOSPkgApp": "Aplikace pro macOS (PKG)",
+ "macOSWebClip": "Webový klip pro macOS",
+ "macOsVppApp": "Aplikace macOS koupená přes Volume Purchase Program",
+ "managedAndroidLobApp": "Spravovaná obchodní aplikace Android",
+ "managedAndroidStoreApp": "Spravovaná aplikace z obchodu pro Android",
+ "managedGooglePlayApp": "Aplikace spravovaného obchodu Google Play",
+ "managedGooglePlayPrivateApp": "Privátní aplikace spravovaného obchodu Google Play",
+ "managedGooglePlayWebApp": "Webový odkaz spravovaného obchodu Google Play",
+ "managedIosLobApp": "Spravovaná obchodní aplikace iOS",
+ "managedIosStoreApp": "Spravovaná aplikace z obchodu pro iOS",
+ "microsoftStoreForBusinessApp": "Aplikace pro Microsoft Store pro firmy",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store pro firmy",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 a novější)",
+ "webApp": "Webový odkaz",
+ "windowsAppXLobApp": "Obchodní aplikace Windows AppX",
+ "windowsClassicApp": "Aplikace pro Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 a novější)",
+ "windowsMobileMsiLobApp": "Obchodní aplikace Windows MSI",
+ "windowsPhone81AppXBundleLobApp": "Obchodní aplikace Windows Phone 8.1 AppX",
+ "windowsPhone81AppXLobApp": "Obchodní aplikace Windows Phone 8.1 AppX",
+ "windowsPhone81StoreApp": "Aplikace pro Windows Phone 8.1 Store",
+ "windowsPhoneXapLobApp": "Obchodní aplikace Windows Phone XAP",
+ "windowsStoreApp": "Aplikace Microsoft Store (starší verze)",
+ "windowsUniversalAppXLobApp": "Obchodní aplikace Windows Universal AppX",
+ "windowsUniversalLobApp": "Univerzální obchodní aplikace pro Windows",
+ "windowsWebApp": "Webový odkaz Windows"
+ },
+ "PolicySet": {
+ "appManagement": "Správa aplikací",
+ "assignments": "Přiřazení",
+ "basics": "Základy",
+ "deviceEnrollment": "Registrace zařízení",
+ "deviceManagement": "Správa zařízení",
+ "scopeTags": "Značky oboru",
+ "appConfigurationTitle": "Zásady konfigurace aplikací",
+ "appProtectionTitle": "Zásady ochrany aplikací",
+ "appTitle": "Aplikace",
+ "iOSAppProvisioningTitle": "Zřizovací profily aplikací pro iOS",
+ "deviceLimitRestrictionTitle": "Omezení limitů počtů zařízení",
+ "deviceTypeRestrictionTitle": "Omezení typů zařízení",
+ "enrollmentStatusSettingTitle": "Stránky stavu registrace",
+ "windowsAutopilotDeploymentProfileTitle": "Profily nasazení Windows Autopilot",
+ "deviceComplianceTitle": "Zásady dodržování předpisů zařízením",
+ "deviceConfigurationTitle": "Profily konfigurace zařízení",
+ "powershellScriptTitle": "Powershellové skripty"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Instalace aplikace může vynutit restartování zařízení",
+ "basedOnReturnCode": "Určete chování na základě návratových kódů",
+ "force": "Intune vynutí povinné restartování zařízení",
+ "suppress": "Žádná konkrétní akce"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Požadovaná doba instalace (minuty)",
+ "maxRunTimeInMinutesToolTip": "Počet minut, po které bude systém čekat na dokončení instalačního programu. Výchozí hodnota je 60 minut."
+ },
+ "RunAsAccountOptions": {
+ "system": "Systém",
+ "user": "Uživatel"
+ },
+ "availableUninstall": "Povolit dostupnou odinstalaci",
+ "availableUninstallTooltip": "Pokud chcete uživatelům z Portálu společnosti poskytnout možnost odinstalace této aplikace, vyberte Ano. Pokud chcete uživatelům zabránit v odinstalaci aplikace z Portálu společnosti, vyberte Ne.",
+ "bladeTitle": "Program",
+ "deviceRestartBehavior": "Chování zařízení při restartu",
+ "deviceRestartBehaviorTooltip": "Vyberte chování restartování zařízení po úspěšné instalaci aplikace. Pokud chcete zařízení restartovat podle nastavení konfigurace návratových kódů, vyberte Určit chování na základě návratových kódů. Pokud chcete restartování zařízení během instalace aplikací založených na Instalační službě MSI potlačit, vyberte Žádná konkrétní akce. Možnost Instalace aplikace může vynutit restartování zařízení zvolte, pokud chcete, aby se instalace aplikace dokončila bez potlačování restartování. Když se vybere možnost Intune vynutí povinné restartování zařízení, zařízení se po úspěšné instalaci aplikace restartuje vždy.",
+ "header": "Zadejte příkazy, pomocí kterých se tato aplikace nainstaluje a odinstaluje:",
+ "installCommand": "Příkaz pro instalaci",
+ "installCommandMaxLengthErrorMessage": "Příkaz Instalovat nesmí překročit maximální povolenou délku 1024 znaků.",
+ "installCommandTooltip": "Celý instalační příkazový řádek, pomocí kterého se tato aplikace instaluje",
+ "runAs32Bit": "Na 64bitových klientech spouštět příkazy k instalaci a odinstalaci v 32bitových procesech",
+ "runAs32BitTooltip": "Pokud chcete na 64bitových klientech instalovat a odinstalovávat aplikaci v 32bitovém procesu, vyberte Ano. Pokud na těchto klientech chcete aplikaci instalovat a odinstalovávat v 64bitovém procesu, vyberte Ne (výchozí). 32bitoví klienti budou vždy používat 32bitový proces.",
+ "runAsAccount": "Chování při instalaci",
+ "runAsAccountTooltip": "Pokud chcete v případě, že se to podporuje, tuto aplikaci nainstalovat pro všechny uživatele, vyberte Systém. Pokud ji chcete nainstalovat pro uživatele, který je na zařízení přihlášený, vyberte Uživatel. U aplikací Instalační služby MSI s dvojím využitím změny znemožní úspěšné dokončení aktualizací a odinstalací, dokud se neobnoví hodnota použitá na zařízení při původní instalaci.",
+ "selectorLabel": "Program",
+ "uninstallCommand": "Příkaz pro odinstalaci",
+ "uninstallCommandTooltip": "Celý odinstalační příkazový řádek, pomocí kterého se tato aplikace odinstaluje"
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Ostatní",
- "additionalRecipients": "Další příjemci (prostřednictvím e-mailu)",
- "additionalRecipientsBladeTitle": "Vybrat další příjemce",
- "emailAddressPrompt": "Zadejte e-mailové adresy (oddělené čárkami).",
- "invalidEmail": "Neplatná e-mailová adresa",
- "messageTemplate": "Šablona zprávy",
- "noneSelected": "Nic není vybráno.",
- "notSelected": "Nevybráno",
- "numSelected": "Počet vybraných: {0}",
- "selected": "Vybrané"
- },
- "block": "Označit zařízení jako nevyhovující",
- "lockDevice": "Uzamknout zařízení (místní akce)",
- "lockDeviceWithPasscode": "Uzamknout zařízení (místní akce)",
- "noAction": "Žádná akce",
- "noActionRow": "Žádné akce. Pokud chcete přidat akci, vyberte Přidat.",
- "pushNotification": "Poslat nabízené oznámení koncovému uživateli",
- "remoteLock": "Vzdáleně uzamknout zařízení, které nedodržuje předpisy",
- "removeSourceAccessProfile": "Odebrat zdrojový profil přístupu",
- "retire": "Přidat zařízení do seznamu k vyřazení",
- "wipe": "Vymazat",
- "emailNotification": "Odeslat e-mail koncovému uživateli"
- },
- "InstallIntent": {
- "available": "K dispozici zaregistrovaným zařízením",
- "availableWithoutEnrollment": "K dispozici s registrací i bez ní",
- "required": "Povinné",
- "uninstall": "Odinstalovat"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Vytvořit vlastní skript",
- "edit": "Upravit vlastní skript"
- },
- "basicInfo": "Vytvořte nový vlastní balíček skriptu ze skriptů detekce a nápravy, které jste napsali.",
- "customScriptCapitalized": "Vlastní skript",
- "customScriptLowercase": "vlastní skript",
- "detectionScript": "Skript detekce"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Povolit používání malých písmen v PIN kódu",
+ "notAllow": "Nepovolit používání malých písmen v PIN kódu",
+ "requireAtLeastOne": "Vyžadovat v PIN kódu aspoň jedno malé písmeno"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Povolit používání speciálních znaků v PIN kódu",
+ "notAllow": "Nepovolit používání speciálních znaků v PIN kódu",
+ "requireAtLeastOne": "Vyžadovat v PIN kódu aspoň jeden speciální znak"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Povolit používání velkých písmen v PIN kódu",
+ "notAllow": "Nepovolit používání velkých písmen v PIN kódu",
+ "requireAtLeastOne": "Vyžadovat v PIN kódu aspoň jedno velké písmeno"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Vytvořit nový",
+ "createNewResourceAccountInfo": "
\r\nVytvořte během registrace nový účet prostředku. Účet prostředku se hned přidá do tabulky účtů prostředků, ale dokud se zařízení nezaregistruje a neověří se předplatné Surface Hubu, nebude aktivní. Další informace o účtech prostředků
\r\n ",
+ "createNewResourceTitle": "Vytvořit nový účet prostředku",
+ "deviceNameInvalid": "Název zařízení nemá platný formát.",
+ "deviceNameRequired": "Název zařízení je povinný.",
+ "editResourceAccountLabel": "Upravit",
+ "selectExistingCommandMenu": "Vybrat existující"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "Názvy musí mít nanejvýš 15 znaků a můžou obsahovat písmena (a–z, A–Z), číslice (0–9) a spojovníky. Názvy se nesmí skládat jen z číslic a nemohou obsahovat mezery."
+ },
+ "Header": {
+ "addressableUserName": "Popisný název uživatele",
+ "azureADDevice": "Přidružené zařízení Microsoft Entra",
+ "batch": "Značka skupiny",
+ "dateAssigned": "Datum přiřazení",
+ "deviceAccountPwd": "Heslo účtu zařízení",
+ "deviceAccountUpn": "Účet zařízení",
+ "deviceDisplayName": "Název zařízení",
+ "deviceFriendlyName": "Popisný název zařízení",
+ "deviceName": "Název zařízení",
+ "deviceUseType": "Typ využití zařízení",
+ "enrollmentState": "Stav registrace",
+ "intuneDevice": "Přidružené zařízení Intune",
+ "lastContacted": "Naposledy kontaktováno",
+ "make": "Výrobce",
+ "model": "Model",
+ "profile": "Přiřazený profil",
+ "profileStatus": "Stav profilu",
+ "purchaseOrderId": "Nákupní objednávka",
+ "resourceAccount": "Účet prostředku",
+ "serialNumber": "Sériové číslo",
+ "userPrincipalName": "Uživatel"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Popisný název je povinný.",
+ "pwdRequired": "Heslo je povinné.",
+ "pwdValidFormat": "Heslo se nepovedlo aktualizovat. Hodnota zadaná pro nové heslo nesplňuje požadavky domény na délku nebo složitost.",
+ "upnRequired": "Účet zařízení je povinný.",
+ "upnValidFormat": "Hodnoty můžou obsahovat písmena (a–z, A–Z), číslice (0–9) a spojovníky. Hodnoty nesmí obsahovat mezeru."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Schůzka a prezentace",
+ "teamCollaboration": "Spolupráce týmů"
+ },
+ "Devices": {
+ "featureDescription": "Windows Autopilot umožňuje přizpůsobit pro vaše uživatele software spouštěný při prvním zapnutí (OOBE).",
+ "importErrorStatus": "Některá zařízení se neimportovala. Pro další informace klikněte sem.",
+ "importPendingStatus": "Probíhá import. Uplynulý čas: {0} min. Tento proces může trvat až {1} min."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Hybridně připojené k Microsoft Entra",
+ "activeDirectoryADLabel": "Hybridní připojení Microsoft Entra s Autopilotem",
+ "azureAD": "Připojeno k Microsoft Entra",
+ "unknownType": "Neznámý typ"
+ },
+ "Filter": {
+ "enrollmentState": "Stav",
+ "profile": "Stav profilu"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "Uživatelsky přívětivý název nemůže být prázdný."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Pokud chcete do svých zařízení během registrace přidávat názvy, vytvořte šablonu pro vytváření názvů.",
+ "label": "Použít šablonu názvu zařízení"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "U profilů nasazení Autopilotu hybridně připojených k Microsoft Entra se zařízení pojmenují pomocí nastavení zadaných v konfiguraci připojení k doméně."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MyCompany-%RAND:4%",
+ "label": "Zadat název",
+ "noDisallowedChars": "Název může obsahovat jen alfanumerické znaky, spojovníky, %SERIAL% nebo %RAND:x%.",
+ "serialLength": "U %SERIAL% se nedá použít více než 7 znaků.",
+ "validateLessThan15Chars": "Název musí obsahovat nanejvýš 15 znaků.",
+ "validateNoSpaces": "Názvy počítačů nemůžou obsahovat mezery.",
+ "validateNotAllNumbers": "Název musí navíc obsahovat písmena nebo spojovníky.",
+ "validateNotEmpty": "Název nesmí být prázdný.",
+ "validateOnlyOneMacro": "Název musí obsahovat buď %SERIAL%, nebo %RAND:x%, ne obojí."
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Vytvořte jedinečný název pro zařízení. Názvy musí mít nanejvýš 15 znaků, můžou obsahovat písmena (a–z, A–Z), číslice (0–9) a spojovníky. Názvy se nesmí skládat jen z číslic ani obsahovat mezeru. Pokud chcete přidat sériové číslo specifické pro daný hardware, použijte makro %SERIAL%. Kromě toho můžete použít makro %RAND:x%, které přidá náhodný řetězec číslic. Písmeno x je počet číslic, které se mají přidat."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Pokud chcete zaregistrovat zařízení a zřídit všechny aplikace a nastavení v kontextu systému, povolte možnost stisknout 5krát tlačítko Windows, aby se spustil software spouštěný při prvním zapnutí počítače. Aplikace a nastavení v kontextu uživatele se nainstalují, až se uživatel přihlásí.",
+ "label": "Povolit předem zřízené nasazení"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Tok hybridního připojení Microsoft Entra k Autopilotu bude pokračovat i v případě, že během spuštění OOBE nevytvoří připojení řadiče domény.",
+ "label": "Přeskočit kontrolu připojení AD"
+ },
+ "accountType": "Typ uživatelského účtu",
+ "accountTypeInfo": "Určete, jestli jsou uživatelé na zařízení správci nebo standardní uživatelé. Upozorňujeme, že toto nastavení se nevztahuje na účty globálního správce ani správce společnosti. Tyto účty nemůžou být standardními uživateli, protože mají přístup ke všem funkcím pro správu v Microsoft Entra ID.",
+ "configOOBEInfo": "
\r\nNakonfigurujte software spouštěný při prvním zapnutí zařízení Autopilot.\r\n
",
+ "configureDevice": "Režim nasazení",
+ "configureDeviceHintForSurfaceHub2": "Autopilot podporuje režim automatického nasazení jen pro Surface Hub 2. Tento režim nepřidružuje uživatele k registrovanému zařízení, proto nevyžaduje jeho přihlašovací údaje.",
+ "configureDeviceHintForWindowsPC": "
\r\n Režim nasazení určuje, jestli uživatel musí pro zřízení zařízení zadat přihlašovací údaje.\r\n
\r\n
\r\n
\r\n Řízení uživatelem: Zařízení se přidruží k uživateli, který zařízení registruje, a při zřizování zařízení se musí zadat přihlašovací údaje uživatele.\r\n
\r\n
\r\n Nasazení sebou samým (Preview): Zařízení nejsou přidružená k uživateli, který je registruje, a při zřizování zařízení se nevyžadují přihlašovací údaje uživatele.\r\n
\r\n
",
+ "createSurfaceHub2Info": "Nakonfigurujte nastavení registrace Autopilot pro zařízení Surface Hub 2. Standardně Autopilot umožňuje v prostředí prvního spuštění počítače přeskočit ověřování uživatelů. Další informace o Windows Autopilotu pro Surface Hub 2",
+ "createWindowsPCInfo": "\r\n
\r\nPro zařízení Autopilot v režimu automatického nasazení se automaticky povolí následující možnosti:\r\n
\r\n
\r\n
\r\n Přeskočit výběr pracovního nebo domácího využití\r\n
\r\n
\r\n Přeskočit registraci OEM a konfiguraci OneDrivu\r\n
\r\n
\r\n Přeskočit ověřování uživatelů v prostředí prvního spuštění počítače\r\n
\r\n
",
+ "endUserDevice": "Řízení uživatelem",
+ "hideEscapeLink": "Skrýt možnosti změny účtu",
+ "hideEscapeLinkInfo": "Možnosti změnit účet a začít znovu s jiným účtem se zobrazují během počáteční instalace zařízení na přihlašovací stránce společnosti a na chybové stránce domény. Pokud chcete tyto možnosti skrýt, musíte v Microsoft Entra ID nakonfigurovat branding společnosti (vyžaduje Windows 10 verze 1809 nebo novější nebo Windows 11).",
+ "info": "Nastavení profilu AutoPilot definují prostředí, které uživatelé uvidí, když poprvé spustí Windows. ",
+ "language": "Jazyk (oblast)",
+ "languageInfo": "Zadejte jazyk a oblast, které se použijí.",
+ "licenseAgreement": "Licenční podmínky pro software společnosti Microsoft",
+ "licenseAgreementInfo": "Zadejte, jestli se uživatelům má zobrazovat smlouva EULA.",
+ "plugAndForgetDevice": "Automatické nasazení",
+ "privacySettingWarning": "Pro zařízení s Windows 10 verze 1903 a novější nebo s Windows 11 se změnila výchozí hodnota pro shromažďování diagnostických dat. ",
+ "privacySettings": "Nastavení soukromí",
+ "privacySettingsInfo": "Zadejte, jestli se uživatelům mají zobrazovat nastavení ochrany osobních údajů.",
+ "showCortanaConfigurationPage": "Konfigurace Cortany",
+ "showCortanaConfigurationPageInfo": "Možnost Zobrazit umožní, aby se během spuštění představila konfigurace Cortany.",
+ "skipEULAWarning": "Důležité informace o skrývání licenčních podmínek",
+ "skipKeyboardSelection": "Automaticky nakonfigurovat klávesnici",
+ "skipKeyboardSelectionInfo": "Když se tato možnost nastaví na true a bude nastavený jazyk, přeskočí se stránka pro výběr klávesnice.",
+ "subtitle": "Profily AutoPilot",
+ "title": "Software spouštěný při prvním zapnutí zařízení",
+ "useOSDefaultLanguage": "Výchozí nastavení operačního systému",
+ "userSelect": "Výběr uživatele"
},
+ "Sync": {
+ "lastRequestedLabel": "Poslední žádost o synchronizaci",
+ "lastSuccessfulLabel": "Poslední úspěšná synchronizace",
+ "syncInProgress": "Probíhá synchronizace. Vraťte se prosím za chvíli.",
+ "syncInitiated": "Synchronizace nastavení AutoPilot byla zahájena.",
+ "syncSettingsTitle": "Synchronizovat nastavení AutoPilot"
+ },
+ "Title": {
+ "devices": "Zařízení Windows AutoPilot"
+ },
+ "Tooltips": {
+ "addressableUserName": "Uvítací název, který se zobrazí při instalaci zařízení",
+ "azureADDevice": "Přejděte na podrobnosti přidruženého zařízení. Hodnota N/A znamená, že žádné přidružené zařízení neexistuje.",
+ "batch": "Řetězcový atribut, pomocí kterého se dá identifikovat skupina zařízení. Pole značky skupiny Intune se mapuje na atribut OrderID v zařízeních Microsoft Entra.",
+ "dateAssigned": "Časové razítko, kdy se profil přiřadil k zařízení",
+ "deviceAccountPwd": "Heslo účtu zařízení pro zařízení Surface Hub. Pokud ho zadáte, vyplňte také účet zařízení a popisný název.",
+ "deviceAccountUpn": "E-mail účtu zařízení pro zařízení Surface Hub. Pokud ho zadáte, vyplňte také heslo účtu zařízení a popisný název.",
+ "deviceDisplayName": "Nakonfigurujte jedinečný název zařízení. Tento název se bude ignorovat v nasazeních hybridně připojených k Microsoft Entra. Název zařízení stále pochází z profilu připojení k doméně pro hybridně připojená zařízení Microsoft Entra.",
+ "deviceFriendlyName": "Popisný název zařízení pro zařízení Surface Hub. Pokud ho zadáte, vyplňte také účet zařízení a heslo účtu zařízení.",
+ "deviceName": "Název, který se zobrazuje, když se někdo pokusí zjistit zařízení a připojit se k němu",
+ "deviceUseType": " Zařízení by se nastavilo podle vaší volby. V nastavení se to dá vždy změnit.\r\n
\r\n
Pro schůzky a prezentace není funkce Windows Hello zapnutá a data se po každé relaci odeberou.\r\n
\r\n
V případě týmové spolupráce je funkce Windows Hello zapnutá a profily se ukládají pro rychlé přihlašování.
\r\n
",
+ "enrollmentState": "Určuje, jestli je zařízení zaregistrované.",
+ "intuneDevice": "Přejděte na podrobnosti přidruženého zařízení. Hodnota N/A znamená, že žádné přidružené zařízení neexistuje.",
+ "lastContacted": "Časové razítko, kdy se se zařízením naposledy navázal kontakt",
+ "make": "Výrobce vybraného zařízení",
+ "model": "Model vybraného zařízení",
+ "profile": "Název profilu přiřazeného k zařízení",
+ "profileStatus": "Určuje, jestli je k zařízení přiřazený profil",
+ "purchaseOrderId": "ID nákupní objednávky",
+ "resourceAccount": "Identita zařízení nebo hlavní název uživatele (UPN)",
+ "serialNumber": "Sériové číslo vybraného zařízení",
+ "userPrincipalName": "Uživatel, kterým se předem vyplní ověřování při instalaci zařízení"
+ },
+ "allDevices": "Všechna zařízení",
+ "allDevicesAlreadyAssignedError": "Profil Autopilot je už přiřazen ke všem zařízením.",
+ "assignFailedDescription": "Nepovedlo se aktualizovat přiřazení pro {0}.",
+ "assignFailedTitle": "Nepovedlo se aktualizovat přiřazení profilů AutoPilot",
+ "assignSuccessDescription": "Přiřazení pro {0} se úspěšně aktualizovala.",
+ "assignSuccessTitle": "Přiřazení profilů AutoPilot se úspěšně aktualizovala",
+ "assignSufaceHub2ProfileNextStep": "Další postup pro toto nasazení",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Přiřaďte tento profil k alespoň jedné skupině zařízení.",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Přiřaďte účet prostředku ke každému zařízení Surface Hub, na které chcete nasadit tento profil.",
+ "assignedDevicesCount": "Přiřazená zařízení",
+ "assignedDevicesResourceAccountDescription": "
Abyste mohli tento profil nasadit na zařízení, musíte zařízení přiřadit k účtu prostředku. Pokud chcete přiřadit existující účet prostředku nebo vytvořit nějaký nový, vyberte po jednom jednotlivá zařízení. Další informace o účtech prostředků
",
+ "assignedDevicesResourceAccountStatusBarMessage": "V této tabulce se uvádějí jen zařízení Surface Hub 2, kterým se přiřadil tento profil.",
+ "assigningDescription": "Aktualizuje se přiřazení pro {0}.",
+ "assigningTitle": "Aktualizují se přiřazení profilů AutoPilot",
+ "autoremediationContext": "Na tomto zařízení jsme zjistili změnu hardwaru. Pokoušíme se automaticky zaregistrovat nový hardware. Teď nemusíte nic dělat. Stav se aktualizuje při příštím ohlášení. Další informace o resetování profilu.",
+ "autoremediationTitle": "Zařízení {0} čeká na opravu",
+ "cannotDeleteMessage": "Tento profil je přidružený ke skupinám. Než budete moct profil odstranit, bude nutné zrušit v něm přiřazení všech skupin.",
+ "cannotDeleteTitle": "Nejde odstranit {0}",
+ "createdDateTime": "Vytvořeno",
+ "deleteMessage": "Pokud tento profil AutoPilot odstraníte, bude se u všech zařízení přiřazených k tomuto profilu zobrazovat Nepřiřazeno.",
+ "deleteMessageWithPolicySet": "Profil {0} je zahrnutý v jedné nebo více sadách zásad. Pokud profil {0} odstraníte, nebudete už jej moct přiřazovat prostřednictvím těchto sad zásad. Chcete jej přesto odstranit?",
+ "deleteTitle": "Opravdu chcete tento profil odstranit?",
+ "description": "Popis",
+ "deviceType": "Typ zařízení",
+ "deviceUse": "Použití zařízení",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot podporuje připojení k Microsoft Entra jenom pro zařízení Surface Hub 2. Zadejte, jak se zařízení připojují k Active Directory (AD) ve vaší organizaci.\r\n
\r\n
\r\n
\r\n Připojeno k Microsoft Entra: Jen cloud bez místní služby Active Directory Windows Serveru.\r\n
\r\n Zadejte, jak se zařízení připojují k Active Directory (AD) ve vaší organizaci:\r\n
\r\n
\r\n
\r\n Připojeno k Microsoft Entra: Jen cloud bez místní služby Active Directory Windows Serveru\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Při načítání počtu přiřazených zařízení došlo k chybě.",
+ "getAssignmentsError": "Při načítání přiřazení profilů AutoPilot došlo k chybě.",
+ "harvestDeviceId": "Převést všechna cílová zařízení na Autopilot",
+ "harvestDeviceIdDescription": "Standardně se tento profil dá zavést jen pro zařízení Autopilot synchronizovaná ze služby Autopilot.",
+ "harvestDeviceIdInfo": "\r\n Když vyberete Ano, zaregistrujete všechna cílová zařízení do Autopilota, pokud už nejsou registrovaná. Až registrovaná zařízení příště projdou softwarem spouštěným při prvním zapnutí Windows, projdou přiřazeným scénářem Autopilot.\r\n \r\n Pamatujte, že některé scénáře Autopilot vyžadují konkrétní minimální sestavení systému Windows. Zkontrolujte, jestli má vaše zařízení minimální požadované sestavení, aby scénářem prošlo.\r\n \r\n Odebrání tohoto profilu neodebere ovlivněná zařízení z Autopilota. Pokud chcete odebrat zařízení z Autopilota, použijte zobrazení Zařízení Windows Autopilot.\r\n ",
+ "harvestDeviceIdWarning": "Po převodu se zařízení Autopilot dají vrátit jen tak, že se odstraní ze seznamu zařízení Autopilot.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Profily nasazení Windows AutoPilot umožňují přizpůsobit software spouštěný při prvním zapnutí vašich zařízení.",
+ "invalidProfileNameMessage": "Znak {0} není povolený.",
+ "joinTypeLabel": "Připojit se k Microsoft Entra ID jako",
+ "lastModifiedDateTime": "Poslední změna:",
+ "manualRemediationContext": "Na tomto zařízení jsme zjistili změnu hardwaru. Pokud zařízení znovu nezaregistrujete, při obnovení do továrního nastavení automaticky neobdrží profil Autopilot. Další informace o resetování profilu.",
+ "manualRemediationTitle": "Zařízení {0} vyžaduje vaši pozornost",
+ "name": "Název",
+ "noAutopilotProfile": "Žádné profily AutoPilot",
+ "notEnoughPermissionAssignedError": "K přiřazení tohoto profilu do jedné nebo více vybraných skupin nemáte dostatečná oprávnění. Obraťte se prosím na svého správce.",
+ "profile": "profil",
+ "resourceAccountStatusBarMessage": "Pro každé zařízení Surface Hub 2, do kterého je nasazený tento profil, se vyžaduje jeden účet prostředku. Kliknutím získáte další informace.",
+ "selectServices": "Vyberte adresářovou službu, ke které se zařízení připojí.",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Režim nasazení",
+ "windowsPCCommandMenu": "Počítač s Windows",
+ "directoryServiceLabel": "Připojit se k Microsoft Entra ID jako"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Spravovaná zařízení",
+ "devicesWithoutEnrollment": "Spravované aplikace"
+ },
+ "AppProtection": {
+ "allAppTypes": "Cílit na všechny typy aplikací",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Aplikace v pracovním profilu Androidu",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Aplikace na vyhrazených zařízeních s Androidem Enterprise se sdíleným režimem Microsoft Entra",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
+ "appsOnAndroidOpenSourceProjectUserless": "Aplikace v Android Open Source Project Userless",
+ "appsOnIntuneManagedDevices": "Aplikace na spravovaných zařízeních Intune",
+ "appsOnUnmanagedDevices": "Aplikace na nespravovaných zařízeních",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Není dostupné",
+ "windows10PlatformLabel": "Windows 10 a novější",
+ "withEnrollment": "S registrací",
+ "withoutEnrollment": "Bez registrace"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Project Online Desktop Client",
+ "visioProRetail": "Visio Online Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "{0} se nepovedlo odstranit.",
+ "failureCa": "Nepodařilo se odstranit: {0}, protože na to odkazují zásady certifikační autority.",
+ "modifying": "Odstraňuje se {0}.",
+ "success": "Úspěšně jste odstranili: {0}."
+ },
+ "Notify": {
+ "failure": "Aplikaci {0} se nepodařilo aktualizovat.",
+ "modifying": "Upravuje se {0}.",
+ "success": "Aplikace {0} se úspěšně aktualizovala."
+ },
+ "menuLabel": "Kontext ověřování"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Další informace o vyžadování metod ověřování, které plní zprostředkovatelé federace.",
+ "certificate": "Ověřování certifikátem",
+ "infoBubble": "Zadejte požadovanou metodu ověřování, kterou musí splnit poskytovatel federace, třeba ADFS.",
+ "multifactor": "Vícefaktorové ověřování",
+ "require": "Vyžadovat federovanou metodu ověřování (Preview)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Zásady trvalých relací prohlížečů fungují správně, jen když je vybraná možnost Všechny cloudové aplikace. Aktualizujte prosím svůj výběr cloudových aplikací."
+ },
+ "Option": {
+ "always": "Vždy trvalá",
+ "help": "Trvalá relace prohlížeče umožňuje uživateli zůstat přihlášený i poté, co zavře a znovu otevře okno prohlížeče. \n
\n
Toto nastavení funguje správně, když je vybraná možnost Všechny cloudové aplikace.
\n
Na nastavení životnosti tokenů nebo frekvence přihlašování to nemá vliv.
\n
Toto nastavení přepíše zásady Zobrazit možnost zachovat přihlášení v Brandingu společnosti.
\n
Možnost Nikdy není trvalá přepíše všechny trvalé deklarace identity jednotného přihlašování předané z federovaných ověřovacích služeb.
\n
Možnost Nikdy není trvalá znemožní jednotné přihlašování na mobilních zařízeních mezi aplikacemi a mezi aplikacemi a mobilním prohlížečem uživatele.
\n",
+ "label": "Trvalá relace prohlížeče",
+ "never": "Nikdy není trvalá"
+ },
+ "Warning": {
+ "allApps": "Trvalá relace prohlížeče funguje správně, jen když je vybraná možnost Všechny cloudové aplikace. Změňte prosím svůj výběr cloudových aplikací. Pro další informace klikněte sem."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Hodiny nebo dny",
+ "value": "Frekvence"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} d.",
+ "singular": "1 den"
+ },
+ "Hour": {
+ "plural": "{0} hod.",
+ "singular": "1 hodina"
+ },
+ "daysOption": "Dny",
+ "everytime": "Pokaždé",
+ "help": "Doba, než se uživateli při přístupu k nějakému prostředku znovu zobrazí výzva k přihlášení. Výchozí nastavení je 90denní posuvné okno, tj. uživateli se výzva k opětovnému ověření zobrazí při prvním pokusu o přístup k prostředku poté, co na počítači nebyl uživatel aktivní 90 dní nebo déle.",
+ "hoursOption": "Hodin",
+ "label": "Frekvence přihlašování",
+ "placeholder": "Vybrat jednotky"
+ }
+ },
+ "mainOption": "Upravit životnost relace",
+ "mainOptionHelp": "Nakonfigurujte, jak často se uživatelům bude zobrazovat výzva a jestli se mají zachovávat relace prohlížečů. Aplikace, které nepodporují moderní ověřovací protokoly, možná nebudou tyto zásady dodržovat. V takových případech se prosím obraťte na vývojáře aplikace."
+ },
+ "SingleSelectorActive": {
+ "failed": "Tato data se nedaří načíst.",
+ "reattempt": "Načítají se data. Opakovaný pokus {0} z {1}."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Zvolit role adresářů"
+ },
+ "Excluded": {
+ "gridAria": "Seznam vyloučených uživatelů"
+ },
+ "Included": {
+ "gridAria": "Seznam zahrnutých uživatelů"
+ },
+ "Validation": {
+ "customRoleIncluded": "Role adresáře obsahují alespoň jednu vlastní roli.",
+ "customRoleSelected": "Vybrala se alespoň jedna vlastní role.",
+ "failed": "{0} se musí nakonfigurovat.",
+ "roles": "Vyberte alespoň jednu roli.",
+ "usersGroups": "Vyberte alespoň jednoho uživatele nebo skupinu."
+ },
+ "learnMore": "Řízení přístupu na základě toho, na koho se zásady budou vztahovat, jako jsou uživatelé a skupiny, identity úloh, role adresáře nebo externí hosté."
+ },
+ "advancedTabText": "Upřesnit",
+ "allCloudAppsErrorBox": "Když se vybere oprávnění Požadovat změnu hesla, musí se vybrat i možnost Všechny cloudové aplikace.",
+ "allCloudAppsReauth": "Pokud je vybrané řízení relace s Frekvencí přihlašování pokaždé a oprávnění Riziko přihlašování, musíte vybrat možnost Všechny cloudové aplikace.",
+ "allCloudOrSpecificApps": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje výběr „všechny cloudové aplikace“ nebo specificky podporovaných aplikací.",
+ "allDayCheckboxLabel": "Celý den",
+ "allDevicePlatforms": "Libovolné zařízení",
+ "allGuestUserInfoContent": "Zahrnuje hosty Microsoft Entra B2B, ale ne hosty SharePoint B2B.",
+ "allGuestUserLabel": "Všichni hosté a externí uživatelé",
+ "allRiskLevelsOption": "Všechny úrovně rizika",
+ "allTrustedLocationLabel": "Všechna důvěryhodná umístění",
+ "allUserGroupSetSelectorLabel": "Vybrali se všichni uživatelé a skupiny",
+ "allUsersReauth": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje výběr „Všichni uživatelé“.",
+ "allUsersString": "Všichni uživatelé",
+ "and": "{0} A {1} ",
+ "andWithGrouping": "({0}) A {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Jakákoli cloudová aplikace",
+ "appContextOptionInfoContent": "Požadovaná ověřovací značka",
+ "appContextOptionLabel": "Požadovaná ověřovací značka (Preview)",
+ "appContextUriPlaceholder": "Příklad: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Omezení vynucená aplikací můžou vyžadovat další konfiguraci v cloudových aplikacích. Omezení budou platit jenom pro nové relace.",
+ "appNotSetSeletorLabel": "0 vybraných aplikací",
+ "appReauthNotSupported": "Tato aplikace nepodporuje řízení relace frekvence přihlašování pokaždé.",
+ "applyConditionClientAppInfoBalloonContent": "Konfigurace klientských aplikací tak, aby se dané zásady používaly pro konkrétní klientské aplikace",
+ "applyConditionDevicePlatformInfoBalloonContent": "Konfigurace platforem zařízení tak, aby se dané zásady používaly pro konkrétní platformy",
+ "applyConditionDeviceStateInfoBalloonContent": "Konfigurace stavu zařízení tak, aby se dané zásady používaly pro konkrétní stavy zařízení",
+ "applyConditionLocationInfoBalloonContent": "Konfigurace lokalit tak, aby se dané zásady používaly pro důvěryhodné nebo nedůvěryhodné lokality",
+ "applyConditionSigninRiskInfoBalloonContent": "Konfigurace rizika přihlašování tak, aby se dané zásady používaly pro vybrané úrovně rizika",
+ "applyConditionUserRiskInfoBalloonContent": "Konfigurace rizika uživatele tak, aby se dané zásady používaly pro vybrané úrovně rizika",
+ "applyConditonLabel": "Konfigurovat",
+ "ariaLabelPolicyDisabled": "Zásada je zakázána.",
+ "ariaLabelPolicyEnabled": "Zásady jsou povolené",
+ "ariaLabelPolicyReportOnly": "Zásady jsou v režimu pouze sestav.",
+ "blockAccess": "Blokovat přístup",
+ "builtInDirectoryRoleLabel": "Integrované role adresáře",
+ "casCustomControlInfo": "Vlastní zásady se musí nakonfigurovat na portálu Cloud App Security. Pro doporučované aplikace tento ovládací prvek funguje okamžitě a je možné pro něj provést automatický onboarding do libovolné aplikace. Pro další informace o obou scénářích klikněte sem.",
+ "casInfoBubble": "Tento ovládací prvek funguje v různých cloudových aplikacích.",
+ "casPreconfiguredControlInfo": "Pro doporučované aplikace tento ovládací prvek funguje okamžitě a je možné pro něj provést automatický onboarding do libovolné aplikace. Pro další informace o obou scénářích klikněte sem.",
+ "cert64DownloadCol": "Stáhnout certifikát base64",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Stáhnout certifikát",
+ "certDurationCol": "Vypršení platnosti",
+ "certDurationStartCol": "Platné od",
+ "certName": "VpnCert",
+ "certainApps": "Pro frekvenci přihlašování typu pokaždé se podporují jenom některé aplikace, pokud nevyberete oprávnění Vyžadovat vícefaktorové ověřování a Vyžadovat změnu hesla.",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Volba aplikací",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Zvolené aplikace",
+ "chooseApplicationsEmpty": "Žádné aplikace",
+ "chooseApplicationsNone": "Žádný",
+ "chooseApplicationsNoneFound": "{0} se nám nepovedlo najít. Zkuste jiný název nebo ID.",
+ "chooseApplicationsPlural": "{0}, počet dalších: {1}",
+ "chooseApplicationsReAuthEverytimeInfo": "Hledáte svou aplikaci? Některé aplikace se nedají použít s řízením relace Vyžadovat opakované ověření – pokaždé.",
+ "chooseApplicationsRemove": "Odebrat",
+ "chooseApplicationsReturnedPlural": "Našel se tento počet aplikací: {0}",
+ "chooseApplicationsReturnedSingular": "Našla se 1 aplikace.",
+ "chooseApplicationsSearchBalloon": "Vyhledejte aplikaci tak, že zadáte její název nebo ID.",
+ "chooseApplicationsSearchHint": "Hledat aplikace...",
+ "chooseApplicationsSearchLabel": "Aplikace",
+ "chooseApplicationsSearching": "Vyhledávání...",
+ "chooseApplicationsSelect": "Vybrat",
+ "chooseApplicationsSelected": "Vybrané",
+ "chooseApplicationsSingular": "{0} a 1 další",
+ "chooseApplicationsTooMany": "Více výsledků, než se dá zobrazit. Pomocí vyhledávacího pole prosím nastavte filtr.",
+ "chooseLocationCorpnetItem": "Podniková síť",
+ "chooseLocationSelectedLocationsLabel": "Vybraná umístění",
+ "chooseLocationTrustedIpsItem": "Důvěryhodné IP adresy vícefaktorového ověřování",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Zvolte umístění",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Zvolená umístění",
+ "chooseLocationsEmpty": "Žádná umístění",
+ "chooseLocationsExcludedSelectorTitle": "Vybrat",
+ "chooseLocationsIncludedSelectorTitle": "Vybrat",
+ "chooseLocationsNone": "Žádný",
+ "chooseLocationsNoneFound": "{0} se nám nepovedlo najít. Zkuste jiný název nebo ID.",
+ "chooseLocationsPlural": "{0}, počet dalších: {1}",
+ "chooseLocationsRemove": "Odebrat",
+ "chooseLocationsReturnedPlural": "Počet nalezených umístění: {0}",
+ "chooseLocationsReturnedSingular": "Počet nalezených umístění: 1",
+ "chooseLocationsSearchBalloon": "Vyhledejte umístění tak, že zadáte jeho název.",
+ "chooseLocationsSearchHint": "Hledat v umístěních...",
+ "chooseLocationsSearchLabel": "Umístění",
+ "chooseLocationsSearching": "Vyhledávání...",
+ "chooseLocationsSelect": "Vybrat",
+ "chooseLocationsSelected": "Vybrané",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Vybrat",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Vybrat",
+ "chooseLocationsSingular": "{0} a 1 další",
+ "chooseLocationsTooMany": "Více výsledků, než se dá zobrazit. Pomocí vyhledávacího pole prosím nastavte filtr.",
+ "claimProviderAddCommandText": "Nový vlastní ovládací prvek",
+ "claimProviderAddNewBladeTitle": "Nový vlastní ovládací prvek",
+ "claimProviderDeleteCommand": "Odstranit",
+ "claimProviderDeleteDescription": "Opravdu chcete odstranit síť {0}? Tato akce je nevratná.",
+ "claimProviderDeleteTitle": "Jste si jistí?",
+ "claimProviderEditInfoText": "Zadejte JSON pro přizpůsobený ovládací prvek předaný poskytovatelem deklarací identit.",
+ "claimProviderNotificationCreateDescription": "Vytváří se vlastní ovládací prvek s názvem {0}.",
+ "claimProviderNotificationCreateFailedDescription": "Nepovedlo se vytvořit vlastní ovládací prvek {0}. Zkuste to prosím znovu později.",
+ "claimProviderNotificationCreateFailedTitle": "Nepovedlo se vytvořit vlastní ovládací prvek",
+ "claimProviderNotificationCreateSuccessDescription": "Vytvořil se vlastní ovládací prvek s názvem {0}.",
+ "claimProviderNotificationCreateSuccessTitle": "Vytvořila se síť {0}",
+ "claimProviderNotificationCreateTitle": "Vytváří se {0}",
+ "claimProviderNotificationDeleteDescription": "Odstraňuje se vlastní ovládací prvek s názvem {0}.",
+ "claimProviderNotificationDeleteFailedDescription": "Nepovedlo se odstranit vlastní ovládací prvek {0}. Zkuste to prosím znovu později.",
+ "claimProviderNotificationDeleteFailedTitle": "Nepovedlo se odstranit vlastní ovládací prvek",
+ "claimProviderNotificationDeleteSuccessDescription": "Odstranil se vlastní ovládací prvek s názvem {0}.",
+ "claimProviderNotificationDeleteSuccessTitle": "Odstranila se síť {0}",
+ "claimProviderNotificationDeleteTitle": "Odstraňuje se {0}.",
+ "claimProviderNotificationUpdateDescription": "Aktualizuje se vlastní ovládací prvek s názvem {0}.",
+ "claimProviderNotificationUpdateFailedDescription": "Nepovedlo se aktualizovat vlastní ovládací prvek {0}. Zkuste to prosím znovu později.",
+ "claimProviderNotificationUpdateFailedTitle": "Nepovedlo se aktualizovat vlastní ovládací prvek",
+ "claimProviderNotificationUpdateSuccessDescription": "Aktualizoval se vlastní ovládací prvek s názvem {0}.",
+ "claimProviderNotificationUpdateSuccessTitle": "Aktualizovala se síť {0}",
+ "claimProviderNotificationUpdateTitle": "Aktualizuje se {0}",
+ "claimProviderValidationAppIdInvalid": "Hodnota AppId není platná. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationClientIdMissing": "V datech chybí hodnota ClientId. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationControlClaimsRequestedMissing": "V Control chybí hodnota ClaimsRequested. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "V položce ClaimsRequested chybí hodnota Type. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationControlIdAlreadyExists": "Hodnota Id pro Control už existuje. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationControlIdMissing": "V Control chybí hodnota Id. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "Hodnotu Id pro Control nejde odebrat, protože se na ni odkazují existující zásady. Nejdříve ji prosím odeberte z těchto zásad.",
+ "claimProviderValidationControlIdTooManyControls": "Vlastnost Control má příliš mnoho ovládacích prvků. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationControlIdValueReserved": "Hodnota Id pro Control je vyhrazené klíčové slovo, použijte prosím jiné ID.",
+ "claimProviderValidationControlNameAlreadyExists": "Hodnota Name pro Control už existuje. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationControlNameMissing": "V Control chybí hodnota Name. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationControlsMissing": "V datech chybí hodnota Controls. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationDiscoveryUrlMissing": "V datech chybí hodnota DiscoveryUrl. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationInvalid": "Poskytnutá data nejsou platná. Zkontrolujte je prosím a zkuste to znovu.",
+ "claimProviderValidationInvalidJsonDefinition": "Vlastní ovládací prvek se nepovedlo uložit. Zkontrolujte text JSON a zkuste to znovu.",
+ "claimProviderValidationNameAlreadyExists": "Hodnota Name už existuje. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationNameMissing": "V datech chybí hodnota Name. Zkontrolujte ji prosím a zkuste to znovu.",
+ "claimProviderValidationUnknown": "Při ověřování poskytnutých dat došlo k neznámé chybě. Zkontrolujte je prosím a zkuste to znovu.",
+ "claimProvidersNone": "Žádné vlastní ovládací prvky",
+ "claimProvidersSearchPlaceholder": "Hledat ovládací prvky",
+ "classicPoilcyFilterTitle": "Zobrazit",
+ "classicPolicyAllPlatforms": "Všechny platformy",
+ "classicPolicyClientAppBrowserAndNative": "Prohlížeč, mobilní aplikace a desktopoví klienti",
+ "classicPolicyCloudAppTitle": "Cloudová aplikace",
+ "classicPolicyControlAllow": "Povolit",
+ "classicPolicyControlBlock": "Blokovat",
+ "classicPolicyControlBlockWhenNotAtWork": "Zablokovat přístup mimo práci",
+ "classicPolicyControlRequireCompliantDevice": "Vyžaduje zařízení, které splňuje požadavky.",
+ "classicPolicyControlRequireDomainJoinedDevice": "Vyžaduje zařízení připojené k doméně.",
+ "classicPolicyControlRequireMfa": "Vyžadovat vícefaktorové ověřování",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Mimo práci vyžadovat vícefaktorové ověřování",
+ "classicPolicyDeleteCommand": "Odstranit",
+ "classicPolicyDeleteFailTitle": "Nepovedlo se odstranit klasické zásady",
+ "classicPolicyDeleteInProgressTitle": "Odstraňují se klasické zásady",
+ "classicPolicyDeleteSuccessTitle": "Klasické zásady se odstranily",
+ "classicPolicyDetailBladeTitle": "Podrobnosti",
+ "classicPolicyDisableCommand": "Zakázat",
+ "classicPolicyDisableConfirmation": "Opravdu chcete zakázat zásady {0}? Tato akce je nevratná.",
+ "classicPolicyDisableFailDescription": "Nepovedlo se zakázat zásady {0}.",
+ "classicPolicyDisableFailTitle": "Nepovedlo se zakázat klasické zásady",
+ "classicPolicyDisableInProgressDescription": "Zakazují se zásady {0}.",
+ "classicPolicyDisableInProgressTitle": "Zakazují se klasické zásady",
+ "classicPolicyDisableSuccessDescription": "Zásady {0} se úspěšně zakázaly.",
+ "classicPolicyDisableSuccessTitle": "Klasické zásady se zakázaly",
+ "classicPolicyEasSupportedPlatforms": "Podporované platformy protokolu Exchange ActiveSync",
+ "classicPolicyEasUnsupportedPlatforms": "Nepodporované platformy protokolu Exchange ActiveSync",
+ "classicPolicyExcludedPlatformsTitle": "Vyloučené platformy zařízení",
+ "classicPolicyFilterAll": "Všechny zásady",
+ "classicPolicyFilterDisabled": "Zakázané zásady",
+ "classicPolicyFilterEnabled": "Povolené zásady",
+ "classicPolicyIncludeExcludeMembersDescription": "Vyloučením skupin je možné provést migraci zásad rozdělenou do fází.",
+ "classicPolicyIncludeExcludeMembersTitle": "Zahrnout nebo vyloučit skupiny",
+ "classicPolicyIncludedPlatformsTitle": "Zahrnuté platformy zařízení",
+ "classicPolicyManualMigrationMessage": "Tyto zásady se musí migrovat ručně.",
+ "classicPolicyMigrateCommand": "Migrovat",
+ "classicPolicyMigrateConfirmation": "Opravdu chcete migrovat zásady {0}? Tyto zásady se dají migrovat jen jednou.",
+ "classicPolicyMigrateFailDescription": "Nepovedlo se migrovat zásady {0}.",
+ "classicPolicyMigrateFailTitle": "Nepovedlo se migrovat klasické zásady",
+ "classicPolicyMigrateInProgressDescription": "Migrují se zásady {0}.",
+ "classicPolicyMigrateInProgressTitle": "Migrují se klasické zásady",
+ "classicPolicyMigrateRecommendText": "Doporučení: Proveďte migraci na nové zásady portálu Azure Portal.",
+ "classicPolicyMigrateSuccessTitle": "Klasické zásady se úspěšně migrovaly",
+ "classicPolicyMigratedSuccessDescription": "Tyto klasické zásady se teď dají spravovat v části Zásady.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "Tyto klasické zásady se migrovaly jako následující počet nových zásad: {0}. Nové zásady se dají spravovat v části Zásady.",
+ "classicPolicyNoEditPermissionMsg": "Nemáte oprávnění upravovat tyto zásady. To můžou dělat jen globální správci a správci zabezpečení. Další informace získáte tady.",
+ "classicPolicySaveFailDescription": "Nepovedlo se uložit zásady {0}.",
+ "classicPolicySaveFailTitle": "Nepovedlo se uložit klasické zásady",
+ "classicPolicySaveInProgressDescription": "Ukládají se zásady {0}.",
+ "classicPolicySaveInProgressTitle": "Ukládají se klasické zásady",
+ "classicPolicySaveSuccessDescription": "Zásady {0} se úspěšně uložily.",
+ "classicPolicySaveSuccessTitle": "Klasické zásady se uložily",
+ "clientAppBladeLegacyInfoBanner": "Starší verze ověřování se v tuto chvíli nepodporuje.",
+ "clientAppBladeLegacyUpsellBanner": "Zablokovat nepodporované klientské aplikace (Preview)",
+ "clientAppBladeTitle": "Klientské aplikace",
+ "clientAppDescription": "Vyberte klientské aplikace, na které se budou tyto zásady vztahovat.",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync v tuto chvíli nepodporuje všechny ostatní podmínky.",
+ "clientAppLearnMore": "Umožňuje nastavit přístup uživatelů na cílení na konkrétní klientské aplikace, které nepoužívají moderní ověřování.",
+ "clientAppLegacyHeader": "Starší verze klientů ověřování",
+ "clientAppMobileDesktop": "Mobilní aplikace a desktopoví klienti",
+ "clientAppModernHeader": "Moderní klienti ověřování",
+ "clientAppOnlySupportedPlatforms": "Použít zásady jenom na podporovaných platformách",
+ "clientAppSelectSpecificClientApps": "Vyberte klientské aplikace.",
+ "clientAppWebBrowser": "Prohlížeč",
+ "clientAppsSelectedLabel": "Zahrnuto: {0}",
+ "clientTypeBrowser": "Prohlížeč",
+ "clientTypeEas": "Klienti Exchange ActiveSync",
+ "clientTypeEasInfo": "Jen klienti Exchange ActiveSync, kteří používají starší verzi ověřování",
+ "clientTypeModernAuth": "Klienti moderního ověřování",
+ "clientTypeOtherClients": "Ostatní klienti",
+ "clientTypeOtherClientsInfo": "Mezi to patří starší klienti Office a další poštovní protokoly (POP, IMAP, SMTP apod.). [Další informace][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "Cloudové aplikace {0} nakonfigurované v těchto zásadách se odstranily z adresáře, ale na ostatní aplikace v zásadách to nemá žádný vliv. Až v zásadách příště aktualizujete oddíl aplikací, odstraněné aplikace se z nich automaticky odeberou.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Všechny aplikace Microsoftu",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Povolit desktopové a mobilní aplikace a aplikace Microsoft Cloudu (Preview)",
+ "cloudappsSelectionBladeAllCloudapps": "Všechny cloudové aplikace",
+ "cloudappsSelectionBladeExcludeDescription": "Vyberte cloudové aplikace, které se mají z této zásady vyloučit.",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Vybrat vyloučené cloudové aplikace",
+ "cloudappsSelectionBladeIncludeDescription": "Vyberte cloudové aplikace, na které se budou vztahovat tyto zásady.",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Vybrat",
+ "cloudappsSelectionBladeSelectedCloudapps": "Vybrat aplikace",
+ "cloudappsSelectorInfoBallonText": "Služby, ke kterým uživatel přistupuje, aby mohl pracovat. Třeba Salesforce.",
+ "cloudappsSelectorPluralExcluded": "Vyloučené aplikace: {0}",
+ "cloudappsSelectorPluralIncluded": "Zahrnuté aplikace: {0}",
+ "cloudappsSelectorSingularExcluded": "1 vyloučená aplikace",
+ "cloudappsSelectorSingularIncluded": "1 zahrnutá aplikace",
+ "cloudappsSelectorUserPlural": "Počet aplikací: {0}",
+ "cloudappsSelectorUserSingular": "Počet aplikací: 1",
+ "conditionLabelMulti": "Počet vybraných podmínek: {0}",
+ "conditionLabelOne": "Počet vybraných podmínek: 1",
+ "conditionalAccessBladeTitle": "Podmíněný přístup",
+ "conditionsNotSelectedLabel": "Nenakonfigurováno",
+ "conditionsReqMfaReauthSet": "Některé možnosti nejsou dostupné kvůli aktuálně vybranému oprávnění Vyžadovat vícefaktorové ověřování a řízení relace s frekvencí přihlašování typu pokaždé.",
+ "conditionsReqPwSet": "Některé možnosti nejsou k dispozici, protože je v tuto chvíli vybrané oprávnění Požadovat změnu hesla.",
+ "configureCasText": "Konfigurovat Cloud App Security",
+ "configureCustomControlsText": "Nakonfigurovat vlastní zásady",
+ "controlLabelMulti": "Počet vybraných ovládacích prvků: {0}",
+ "controlLabelOne": "Počet vybraných ovládacích prvků: 1",
+ "controlValidatorText": "Vyberte prosím aspoň jeden ovládací prvek.",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Přečtěte si další informace o vyžadování zařízení dodržujících předpisy.",
+ "controlsDeviceComplianceInfoBubble": "Zařízení musí dodržovat předpisy Intune. Pokud je nedodržuje, zobrazí se uživateli výzva, aby zařízení nastavil tak, aby předpisy dodržovalo.",
+ "controlsDomainJoinedAriaLabel": "Přečtěte si další informace o vyžadování zařízeních hybridně připojených k Microsoft Entra.",
+ "controlsDomainJoinedInfoBubble": "Zařízení musí být hybridně připojená k Microsoft Entra.",
+ "controlsMamAriaLabel": "Další informace o vyžadování schválených klientských aplikací.",
+ "controlsMamInfoBubble": "Zařízení musí používat tyto aplikace schválené klientem.",
+ "controlsMfaInfoBubble": "Uživatelé musí splnit další požadavky na zabezpečení, třeba telefonní hovor nebo textovou zprávu.",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Další informace o vyžadování aplikací chráněných zásadami.",
+ "controlsRequireCompliantAppInfoBubble": "Zařízení musí používat aplikace chráněné zásadami.",
+ "controlsRequirePasswordResetAriaLabel": "Další informace o vyžadování změny hesla.",
+ "controlsRequirePasswordResetInfoBubble": "Umožňuje požadovat změnu hesla, aby se snížilo riziko uživatele. Tato možnost navíc vyžaduje vícefaktorové ověřování. Jiné ovládací prvky se nedají použít.",
+ "countriesRadiobuttonInfoBalloonContent": "Země nebo oblast, ze které pochází přihlášení, je určená IP adresou uživatele.",
+ "createNewVpnCert": "Nový certifikát",
+ "createdTimeLabel": "Čas vytvoření",
+ "customRoleLabel": "Vlastní role (nepodporuje se)",
+ "dateRangeTypeLabel": "Rozsah dat",
+ "daysOfWeekPlaceholderText": "Filtrovat dny v týdnu",
+ "daysOfWeekTypeLabel": "Dny v týdnu",
+ "deletePolicyNoLicenseText": "Tyto zásady teď můžete odstranit. Jakmile se odstraní, nebudete je moct vytvořit znovu, dokud nebudete mít potřebné licence.",
+ "descriptionContentForControlsAndOr": "Pro více ovládacích prvků",
+ "devicePlatform": "Platforma zařízení",
+ "devicePlatformConditionHelpDescription": "Zavede zásady pro vybrané platformy zařízení.\n[Další informace][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "Zahrnuto: {0}",
+ "devicePlatformIncludeExclude": "Vyloučeno: {0} a {1}",
+ "devicePlatformNoSelectionError": "Výběr platforem zařízení vyžaduje, aby se vybrala alespoň jedna podpoložka.",
+ "devicePlatformsNone": "Žádný",
+ "deviceSelectionBladeExcludeDescription": "Vyberte platformy, které se mají z této zásady vyloučit.",
+ "deviceSelectionBladeIncludeDescription": "Vyberte platformy zařízení, které se mají zahrnout do těchto zásad.",
+ "deviceStateAll": "Všechny stavy zařízení",
+ "deviceStateCompliant": "Zařízení označené jako kompatibilní",
+ "deviceStateCompliantInfoContent": "Zařízení kompatibilní s Intune nebudou součástí vyhodnocování těchto zásad, takže pokud zásady blokují třeba přístup, zablokují ho pro všechna zařízení kromě těch, která jsou kompatibilní s Intune.",
+ "deviceStateConditionConfigureInfoContent": "Nakonfigurovat zásady na základě stavu zařízení",
+ "deviceStateConditionSelectorInfoContent": "Označuje, jestli je zařízení, ze kterého se uživatel přihlašuje, hybridně připojené k Microsoft Entra nebo označené jako odpovídající.\n Tato možnost je teď už zastaralá. Místo toho použijte možnost {1}.",
+ "deviceStateConditionSelectorLabel": "Stav zařízení (zastaralý)",
+ "deviceStateDomainJoined": "Zařízení hybridně připojené k Microsoft Entra",
+ "deviceStateDomainJoinedInfoContent": "Zařízení hybridně připojená k Microsoft Entra nebudou součástí vyhodnocování těchto zásad, takže pokud zásady blokují třeba přístup, zablokují ho pro všechna zařízení kromě těch, která jsou hybridně připojená k Microsoft Entra.",
+ "deviceStateDomainJoinedInfoLinkText": "Další informace",
+ "deviceStateExcludeDescription": "Vyberte podmínku stavu zařízení, na základě které se zařízení vyloučí ze zásad.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} a vyloučit {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} a vyloučit {1}, {2}",
+ "directoryRoleInfoContent": "Přiřadit zásady k integrovaným rolím adresáře",
+ "directoryRolesLabel": "Role adresáře",
+ "discardbutton": "Zahodit",
+ "downloadDefaultFileName": "Rozsahy IP adres",
+ "downloadExampleFileName": "Příklad",
+ "downloadExampleHeader": "Toto je ukázkový soubor s ukázkami typů dat, které se dají přijmout. Řádky, které začínají znakem #, se budou ignorovat.",
+ "duplicate": "Duplikovat",
+ "duplicatePolicyName": "{0} – KOPIE",
+ "endDatePickerLabel": "Končí",
+ "endTimePickerLabel": "Koncový čas",
+ "enterCountryText": "IP adresa a země/oblast se vyhodnocují v páru. Vyberte zemi.",
+ "enterIpText": "IP adresa a země/oblast se vyhodnocují v páru. Zadejte IP adresu.",
+ "enterUserText": "Nevybral se žádný uživatel. Vyberte nějakého uživatele.",
+ "evaluationResult": "Výsledek hodnocení",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Protokol Exchange ActiveSync jen s podporovanými platformami",
+ "excludeAllTrustedLocationSelectorText": "všechna důvěryhodná umístění",
+ "featureRequiresP2": "Tato funkce vyžaduje licenci Microsoft Entra ID P2.",
+ "friday": "Pátek",
+ "grantControls": "Udělit řízení",
+ "gridNetworkTrusted": "Důvěryhodná",
+ "gridPolicyCreatedDateTime": "Datum vytvoření",
+ "gridPolicyEnabled": "Povoleno",
+ "gridPolicyModifiedDateTime": "Datum změny",
+ "gridPolicyName": "Název zásady",
+ "gridPolicyState": "Stav",
+ "groupSelectionBladeExcludeDescription": "Vyberte skupiny, které se mají z těchto zásad vyloučit.",
+ "groupSelectionBladeExcludedSelectorTitle": "Vybrat vyloučené skupiny",
+ "groupSelectionBladeSelect": "Výběr skupin",
+ "groupSelectorInfoBallonText": "Skupiny v adresáři, pro které platí tyto zásady. Příklad: Pilotní skupina.",
+ "groupsSelectionBladeTitle": "Skupiny",
+ "helpCommonScenariosText": "Zajímají vás obvyklé scénáře?",
+ "helpCondition1": "Když je libovolný uživatel mimo síť společnosti",
+ "helpCondition2": "Když se přihlásí uživatelé ze skupiny Manažeři",
+ "helpConditionsTitle": "Podmínky",
+ "helpControl1": "Musí se přihlašovat pomocí vícefaktorového ověřování",
+ "helpControl2": "Musí být na zařízení, které dodržuje předpisy Intune nebo na zařízení připojeném do domény.",
+ "helpControlsTitle": "Ovládací prvky",
+ "helpIntroText": "Podmíněný přístup umožňuje vynucovat specifické požadavky na přístup na základě splnění konkrétních podmínek. Podívejme se na pár příkladů.",
+ "helpIntroTitle": "Co je Podmíněný přístup?",
+ "helpLearnMoreText": "Zajímají vás další informace o Podmíněném přístupu?",
+ "helpStartStep1": "Vytvořte svoje první zásady tak, že kliknete na + Nové zásady.",
+ "helpStartStep2": "Zadejte ovládací prvky a podmínky zásad",
+ "helpStartStep3": "Až to budete mít, nezapomeňte na vytvoření a povolení zásady.",
+ "helpStartTitle": "Začínáme",
+ "highRisk": "Vysoká",
+ "includeAndExcludeAppsTextFormat": "Zahrnout: {0}. Vyloučit: {1}",
+ "includeAppsTextFormat": "Zahrnout: {0}",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Neznámé oblasti jsou IP adresy, které nejdou namapovat na zemi nebo oblast.",
+ "includeUnknownAreasCheckboxLabel": "Včetně neznámých oblastí",
+ "infoCommandLabel": "Informace",
+ "invalidCertDuration": "Neplatná doba platnosti certifikátu",
+ "invalidIpAddress": "Hodnotou musí být platná IP adresa.",
+ "invalidReAuthSignInRiskOptionSelected": "Kontrolní prvek relace „Frekvence přihlášení (pokaždé)“ nepovoluje výběr „bez rizika“ v ovládacím prvku podmínky „Riziko přihlášení“.",
+ "invalidUriErrorMsg": "Zadejte prosím platný identifikátor URI. Příklad: uri:contoso.com:acr ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Načíst vše",
+ "loading": "Načítá se...",
+ "locationConfigureNamedLocationsText": "Konfigurace všech důvěryhodných umístění",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Název umístění je moc dlouhý. Maximum je 256 znaků.",
+ "locationSelectionBladeExcludeDescription": "Vyberte místa, která se mají z této zásady vyloučit.",
+ "locationSelectionBladeIncludeDescription": "Vyberte umístění, která se zahrnou do těchto zásad.",
+ "locationsAllLocationsLabel": "Libovolné umístění",
+ "locationsAllNamedLocationsLabel": "Všechny důvěryhodné IP adresy",
+ "locationsAllPrivateLinksLabel": "Všechna privátní propojení v mém tenantovi",
+ "locationsIncludeExcludeLabel": "{0} a vyloučit všechny důvěryhodné IP adresy",
+ "locationsSelectedPrivateLinksLabel": "Vybraná privátní propojení",
+ "lowRisk": "Nízká",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "Pokud chcete spravovat zásady podmíněného přístupu, vaše organizace potřebuje Microsoft Entra ID P1 nebo P2.",
+ "manageSecurityDefaultsAriaLabel": "Umožňuje spravovat výchozí nastavení zabezpečení.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Přihlášení z důvěryhodného umístění snižuje riziko přihlášení uživatele. Toto umístění jako důvěryhodné označte jenom tehdy, pokud víte, že zadané rozsahy IP adres jsou zřízené a důvěryhodné ve vaší organizaci.",
+ "markAsTrustedCheckboxLabel": "Označit jako důvěryhodné umístění",
+ "mediumRisk": "Střední",
+ "memberSelectionCommandRemove": "Odebrat",
+ "menuItemClaimProviderControls": "Vlastní ovládací prvky (Preview)",
+ "menuItemClassicPolicies": "Klasické zásady",
+ "menuItemInsightsAndReporting": "Přehledy a generování sestav",
+ "menuItemManage": "Spravovat",
+ "menuItemNamedLocationsPreview": "Pojmenovaná umístění (Preview)",
+ "menuItemNamedNetworks": "Pojmenovaná umístění",
+ "menuItemPolicies": "Zásady",
+ "menuItemTermsOfUse": "Podmínky použití",
+ "modifiedTimeLabel": "Čas změny",
+ "monday": "Pondělí",
+ "nameLabel": "Název",
+ "namedLocationCountryInfoBanner": "Na země/oblasti se mapují jen IPv4 adresy. IPv6 adresy se zahrnují do neznámých zemí/oblastí.",
+ "namedLocationTypeCountry": "Země nebo oblasti",
+ "namedLocationTypeLabel": "Definovat umístění pomocí:",
+ "namedLocationUpsellBanner": "Toto zobrazení je zastaralé. Přejděte do nového a vylepšeného zobrazení Pojmenovaná umístění.",
+ "namedLocationsHelpDescription": "Pojmenovaná umístění se používají v sestavách zabezpečení Microsoft Entra ID, aby se snížil počet falešně pozitivních výsledků, a v zásadách Podmíněného přístupu Microsoft Entra.\n[Další informace][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Přidat nový rozsah IP adres (např.: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "Je třeba vybrat aspoň jednu zemi/oblast.",
+ "namedNetworkDeleteCommand": "Odstranit",
+ "namedNetworkDeleteDescription": "Opravdu chcete odstranit síť {0}? Tato akce je nevratná.",
+ "namedNetworkDeleteTitle": "Jste si jistí?",
+ "namedNetworkDownloadIpRange": "Stáhnout",
+ "namedNetworkInvalidRange": "Hodnotou musí být platný rozsah IP adres.",
+ "namedNetworkIpRangeNeeded": "Potřebujete aspoň jeden platný rozsah IP adres.",
+ "namedNetworkIpRangesDescriptionContent": "Nakonfigurujte rozsahy IP adres vaší organizace.",
+ "namedNetworkIpRangesTab": "Rozsahy IP adres",
+ "namedNetworkListAdd": "Nové umístění",
+ "namedNetworkListConfigureTrustedIps": "Konfigurace důvěryhodných IP adres vícefaktorového ověřování",
+ "namedNetworkNameDescription": "Příklad: Pobočka Pardubice",
+ "namedNetworkNameInvalid": "Zadaný název není platný.",
+ "namedNetworkNameRequired": "Pro toto umístění musíte zadat název.",
+ "namedNetworkNoIpRanges": "Žádné rozsahy IP adres",
+ "namedNetworkNotificationCreateDescription": "Vytváří se umístění s názvem {0}.",
+ "namedNetworkNotificationCreateFailedDescription": "Umístění {0} se nepovedlo vytvořit. Zkuste to prosím znovu později.",
+ "namedNetworkNotificationCreateFailedTitle": "Nepovedlo se vytvořit umístění",
+ "namedNetworkNotificationCreateSuccessDescription": "Umístění s názvem {0} se vytvořilo.",
+ "namedNetworkNotificationCreateSuccessTitle": "Vytvořila se síť {0}",
+ "namedNetworkNotificationCreateTitle": "Vytváří se {0}",
+ "namedNetworkNotificationDeleteDescription": "Odstraňuje se umístění s názvem {0}.",
+ "namedNetworkNotificationDeleteFailedDescription": "Umístění {0} se nepovedlo odstranit. Zkuste to prosím znovu později.",
+ "namedNetworkNotificationDeleteFailedTitle": "Nepovedlo se odstranit umístění",
+ "namedNetworkNotificationDeleteSuccessDescription": "Umístění s názvem {0} se odstranilo.",
+ "namedNetworkNotificationDeleteSuccessTitle": "Odstranila se síť {0}",
+ "namedNetworkNotificationDeleteTitle": "Odstraňuje se {0}.",
+ "namedNetworkNotificationUpdateDescription": "Aktualizuje se umístění s názvem {0}.",
+ "namedNetworkNotificationUpdateFailedDescription": "Umístění {0} se nepovedlo aktualizovat. Zkuste to prosím znovu později.",
+ "namedNetworkNotificationUpdateFailedTitle": "Nepovedlo se aktualizovat umístění",
+ "namedNetworkNotificationUpdateSuccessDescription": "Umístění s názvem {0} se aktualizovalo.",
+ "namedNetworkNotificationUpdateSuccessTitle": "Aktualizovala se síť {0}",
+ "namedNetworkNotificationUpdateTitle": "Aktualizuje se {0}",
+ "namedNetworkSearchPlaceholder": "Hledat v umístěních",
+ "namedNetworkUploadFailedDescription": "Při parsování zadaného souboru došlo k chybě. Ujistěte se prosím, že odesíláte textový soubor, ve kterém má každý řádek formát CIDR.",
+ "namedNetworkUploadFailedTitle": "Nepodařilo se analyzovat {0}.",
+ "namedNetworkUploadInProgressDescription": "Probíhá pokus o parsování platných hodnot CIDR z {0}.",
+ "namedNetworkUploadInProgressTitle": "Parsování souboru {0}",
+ "namedNetworkUploadInvalidDescription": "Soubor {0} je buď moc velký, nebo nemá platný formát.",
+ "namedNetworkUploadInvalidTitle": "Soubor {0} není platný",
+ "namedNetworkUploadIpRange": "Nahrát",
+ "namedNetworkUploadSuccessDescription": "Analyzoval se tento počet řádků: {0}. Tento počet z nich měl špatný formát: {1}. Tento počet se přeskočil: {2}",
+ "namedNetworkUploadSuccessTitle": "Parsování souboru {0} se dokončilo",
+ "namedNetworksAdd": "Nové pojmenované umístění",
+ "namedNetworksConditionHelpDescription": "Umožňuje řídit přístup uživatelů na základě fyzické polohy.\n[Další informace][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "Vyloučeno: {0} a {1}",
+ "namedNetworksHelpDescription": "Pojmenovaná umístění se používají v sestavách zabezpečení Microsoft Entra ID, aby se snížil počet falešně pozitivních výsledků, a v zásadách Podmíněného přístupu Microsoft Entra.\n[Další informace][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "Zahrnuto: {0}",
+ "namedNetworksNone": "Nenašla se žádná pojmenovaná umístění.",
+ "namedNetworksTitle": "Konfigurovat místa",
+ "namednetworkExceedingSizeErrorBladeTitle": "Podrobnosti o chybě",
+ "namednetworkExceedingSizeErrorDetailText": "Podrobnosti zobrazíte kliknutím sem.",
+ "namednetworkExceedingSizeErrorMessage": "Překročili jste maximální povolené úložiště pro pojmenovaná umístění. Zkuste to znovu s kratším seznamem. Další podrobnosti získáte, když kliknete sem.",
+ "needMfaSecondary": "Pokud je vybrané řízení relace s frekvencí přihlašování typu pokaždé a s možností Pouze sekundární metody ověřování, musíte vybrat možnost Vyžadovat vícefaktorové ověřování.",
+ "needMfaSpecificApps": "Když jsou vybrány specificky podporované aplikace, řízení relace s frekvencí přihlašování typu pokaždé vyžaduje řízení oprávnění Vyžadovat vícefaktorové ověřování.",
+ "newCertName": "nový certifikát",
+ "noAttributePermissionsError": "K vytvoření nebo aktualizaci zásad nejsou k dispozici dostatečná oprávnění. Pro přidání nebo úpravu dynamických filtrů se vyžaduje role čtenáře definic atributů.",
+ "noPolicyRowMessage": "Žádné zásady",
+ "noSPSelected": "Žádný vybraný objekt služby",
+ "noUpdatePermissionMessage": "K aktualizaci těchto nastavení nemáte oprávnění. Pokud chcete získat přístup, obraťte se prosím na globálního správce.",
+ "noUserSelected": "Nevybral se žádný uživatel.",
+ "noneRisk": "Žádné riziko",
+ "office365Description": "Mezi tyto aplikace patří Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer a další.",
+ "office365InfoBox": "Nejméně jedna vybraná aplikace je součástí Office 365. Doporučujeme zásady nastavit přímo pro aplikaci Office 365.",
+ "oneUserSelected": "Vybral se 1 uživatel.",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Tyto zásady můžou uložit jen globální správci.",
+ "or": "{0} NEBO {1} ",
+ "pickerDoneCommand": "Hotovo",
+ "policiesBladeAdPremiumUpsellBannerText": "Se službou Microsoft Entra ID Premium můžete vytvářet své vlastní zásady s cílením na konkrétní podmínky, třeba cloudové aplikace, riziko přihlášení a platformy zařízení.",
+ "policiesBladeTitle": "Zásady",
+ "policiesBladeTitleWithAppName": "Zásady: {0}",
+ "policiesDisabledBannerText": "Pro aplikace s propojeným atributem registrace jsou vytváření a úpravy zásady zakázané.",
+ "policiesHitMaxLimitStatusBarMessage": "Pro tohoto tenanta jste dosáhli maximálního počtu zásad. Než vytvoříte další zásady, některé prosím odstraňte.",
+ "policyAssignmentsSection": "Přiřazení",
+ "policyBlockAllInfoBox": "Nakonfigurovaná zásada zablokuje všechny uživatele, takže se nepodporuje. Zkontrolujte přiřazení a kontrolní mechanismy. Pokud chcete tuto zásadu uložit, vylučte aktuálního uživatele {0}.",
+ "policyCloudAppsDisplayTextAllApp": "Všechny aplikace",
+ "policyCloudAppsLabel": "Cloudové aplikace",
+ "policyConditionClientAppDescription": "Software, který uživatel používá pro přístup ke cloudové aplikaci. Třeba prohlížeč.",
+ "policyConditionClientAppV2Description": "Software, který uživatel používá pro přístup ke cloudové aplikaci. Třeba prohlížeč.",
+ "policyConditionDevicePlatform": "Platformy zařízení",
+ "policyConditionDevicePlatformDescription": "Platforma, ze které se uživatel přihlašuje. Třeba iOS.",
+ "policyConditionLocation": "Umístění",
+ "policyConditionLocationDescription": "Lokalita, ze které se uživatel přihlašuje (určuje se podle rozsahu IP adres)",
+ "policyConditionLocationPreview": "Umístění (Preview)",
+ "policyConditionSigninRisk": "Riziko přihlášení",
+ "policyConditionSigninRiskDescription": "Pravděpodobnost, že se přihlašuje někdo jiný než daný uživatel. Úroveň rizika může být vysoká, střední nebo nízká. Vyžaduje licenci Microsoft Entra ID P2.",
+ "policyConditionUserRisk": "Riziko uživatele",
+ "policyConditionUserRiskDescription": "Umožňuje nakonfigurovat úrovně rizika uživatelů potřebné k vynucování zásad.",
+ "policyConditioniClientApp": "Klientské aplikace",
+ "policyControlAllowAccessDisplayedName": "Udělit přístup",
+ "policyControlAuthenticationStrengthDisplayedName": "Vyžadovat sílu ověřování (Preview)",
+ "policyControlBladeTitle": "Udělení",
+ "policyControlBlockAccessDisplayedName": "Blokovat přístup",
+ "policyControlCompliantDeviceDisplayedName": "Vyžadovat, aby zařízení bylo označené jako vyhovující",
+ "policyControlContentDescription": "Umožňuje nastavit vynucování přístupu a blokovat nebo udělovat přístup.",
+ "policyControlInfoBallonText": "Zablokujte přístup nebo vyberte další požadavky, které je třeba splnit pro povolení přístupu.",
+ "policyControlMfaChallengeDisplayedName": "Vyžadovat vícefaktorové ověřování",
+ "policyControlRequireCompliantAppDisplayedName": "Vyžadovat zásady ochrany aplikací",
+ "policyControlRequireDomainJoinedDisplayedName": "Vyžadovat zařízení hybridně připojené k Microsoft Entra",
+ "policyControlRequireMamDisplayedName": "Vyžaduje se klientem schválená aplikace.",
+ "policyControlRequiredPasswordChangeDisplayedName": "Požadovat změnu hesla",
+ "policyControlSelectAuthStrength": "Vyžadovat sílu ověřování",
+ "policyControlsNoControlsSelected": "0 vybraných ovládacích prvků",
+ "policyControlsSection": "Ovládací prvky přístupu",
+ "policyCreatBladeTitle": "Nový",
+ "policyCreateButton": "Vytvořit",
+ "policyCreateFailedMessage": "Chyba: {0}",
+ "policyCreateFailedTitle": "Nepovedlo se vytvořit zásady {0}",
+ "policyCreateInProgressTitle": "Vytváří se {0}",
+ "policyCreateSuccessMessage": "Zásady {0} se úspěšně vytvořily. Pokud máte možnost Povolit zásadu nastavenou na Zapnuto, zásady se za několik minut povolí.",
+ "policyCreateSuccessTitle": "Úspěšně se vytvořily zásady {0}",
+ "policyDeleteConfirmation": "Opravdu chcete odstranit síť {0}? Tato akce je nevratná.",
+ "policyDeleteFailTitle": "{0} se nepovedlo odstranit.",
+ "policyDeleteInProgressTitle": "Odstraňuje se {0}.",
+ "policyDeleteSuccessTitle": "Branding {0} se úspěšně odstranil.",
+ "policyEnforceLabel": "Povolit zásadu",
+ "policyErrorCannotSetSigninRisk": "Nemáte oprávnění ukládat zásady s rizikovým stavem přihlášení.",
+ "policyErrorNoPermission": "Nemáte oprávnění ukládat zásady. Obraťte se na svého globálního správce.",
+ "policyErrorUnknown": "Stala se nějaká chyba, zkuste to prosím později.",
+ "policyFallbackWarningMessage": "V MS Graphu nebyla vytvořena nebo aktualizována položka {0}, a proto se použila náhradní funkce AD Graph. Prověřte prosím uvedený scénář, protože při volání koncového bodu pro MS Graph s největší pravděpodobností došlo k chybě způsobené nekompatibilní podmínkou.",
+ "policyFallbackWarningTitle": "Vytváření nebo aktualizace {0} bylo částečně úspěšné",
+ "policyNameCannotBeEmpty": "Název zásad nemůže být prázdný.",
+ "policyNameDevice": "Zásady zařízení",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Zásady správy mobilních aplikací",
+ "policyNameMfaLocation": "Zásady vícefaktorového ověřování a umístění",
+ "policyNamePlaceholderText": "Příklad: Zásady aplikace pro dodržování předpisů zařízením",
+ "policyNameTooLongError": "Název zásad je moc dlouhý. Maximum je 256 znaků.",
+ "policyOff": "Vypnuté",
+ "policyOn": "Zapnuté",
+ "policyReportOnly": "Pouze sestavy",
+ "policyReviewSection": "Zkontrolovat",
+ "policySaveButton": "Uložit",
+ "policyStatusIconDescription": "Zásady jsou povolené",
+ "policyStatusIconEnabled": "Ikona povoleného stavu",
+ "policyTemplateName1": "Pro přístup k aplikaci {0} z prohlížeče použít omezení vynucená aplikací",
+ "policyTemplateName2": "Povolit přístup k aplikaci {0} jenom ze spravovaných zařízení",
+ "policyTemplateName3": "Zásady migrované z nastavení nepřetržitého vyhodnocování přístupu",
+ "policyTriggerRiskSpecific": "Zadejte konkrétní úroveň rizika",
+ "policyTriggersInfoBalloonText": "Podmínky, které definují, kdy se zásady použijí. Třeba lokalita.",
+ "policyTriggersNoConditionsSelected": "0 vybraných podmínek",
+ "policyTriggersSelectorLabel": "Podmínky",
+ "policyUpdateFailedMessage": "Chyba: {0}",
+ "policyUpdateFailedTitle": "Aplikaci {0} se nepodařilo aktualizovat.",
+ "policyUpdateInProgressTitle": "Aktualizuje se {0}.",
+ "policyUpdateSuccessMessage": "Zásada {0} se úspěšně aktualizovala. Povolí se za několik minut, pokud máte možnost Povolit zásadu nastavenou na Zapnuto.",
+ "policyUpdateSuccessTitle": "Aplikace {0} byla úspěšně aktualizována.",
+ "primaryCol": "Primární",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "Režim pouze sestav: Zásady se vyhodnocují a protokolují při přihlašování, ale na uživatele nemají vliv.",
+ "requireAllControlsText": "Vyžadovat všechny vybrané ovládací prvky",
+ "requireCompliantDevice": "Vyžaduje zařízení, které splňuje požadavky.",
+ "requireDomainJoined": "Vyžadovat zařízení připojené k doméně",
+ "requireGrantReauth": "Řízení relace s frekvencí přihlašování typu pokaždé vyžaduje, aby oprávnění Vyžadovat vícefaktorové ověřování nebo Vyžadovat změnu hesla udělilo oprávnění pro řízení, když je vybraná možnost Všechny cloudové aplikace",
+ "requireMFA": "Vyžadovat vícefaktorové ověřování",
+ "requireMfaReauth": "Řízení relace s frekvencí přihlašování typu pokaždé vyžaduje, aby oprávnění Vyžadovat vícefaktorové ověřování udělilo oprávnění pro řízení rizika přihlašování",
+ "requireOneControlText": "Vyžadovat jeden z vybraných ovládacích prvků",
+ "requirePasswordChangeReauth": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje řízení udělování „vyžadovat změnu hesla“ pro „riziko uživatele“.",
+ "requireRiskReauth": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje řízení relace „riziko uživatele“ nebo „riziko přihlášení“, když je vybráno „všechny cloudové aplikace“.",
+ "requireRiskReauthRiskNotEnabled": "Řízení relace „frekvence přihlašování pokaždé“ není k dispozici, když je vybráno „všechny cloudové aplikace“.",
+ "requireRiskReauthSignInOnly": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje řízení relace „riziko přihlášení“, když je vybráno „všechny cloudové aplikace“.",
+ "requireRiskReauthUserOnly": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje řízení relace „riziko uživatele“, když je vybráno „všechny cloudové aplikace“.",
+ "resetFilters": "Resetovat filtry",
+ "sPRequired": "Vyžaduje se objekt služby",
+ "sPSelectorInfoBalloon": "Uživatel nebo objekt služby, který chcete otestovat",
+ "saturday": "Sobota",
+ "searchTextTooLongError": "Hledaný text je příliš dlouhý. Maximum je 256 znaků.",
+ "securityDefaultsPolicyName": "Výchozí nastavení zabezpečení",
+ "securityDefaultsTextMessage": "Aby bylo možné povolit zásady podmíněného přístupu, musí se zakázat výchozí nastavení zabezpečení.",
+ "securityDefaultsUpdateInProgressText": "Probíhá aktualizace výchozího nastavení zabezpečení. Počkejte prosím chvíli a zkuste to znovu.",
+ "securityDefaultsWarningMessage": "Vypadá to, že se chystáte spravovat konfigurace zabezpečení organizace. Výborně! Abyste mohli povolit zásady podmíněného přístupu, musí se nejprve {0}zakázat výchozí nastavení zabezpečení{1}.",
+ "selectDevicePlatforms": "Vybrat platformy zařízení",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Vybrat umístění",
+ "selectedSP": "Vybraný objekt služby",
+ "servicePrincipalBladeExcludedSelectorTitle": "Vybrat vyloučené instanční objekty",
+ "servicePrincipalBladeIncludedSelectorTitle": "Vybrat instanční objekty",
+ "servicePrincipalDataGridAria": "Seznam dostupných objektů služby",
+ "servicePrincipalDropDownLabel": "Na co se vztahují tyto zásady?",
+ "servicePrincipalInfoBox": "Některé podmínky nejsou k dispozici kvůli výběru {0} v přiřazení zásad.",
+ "servicePrincipalRadioAll": "Všechny vlastněné objekty služby",
+ "servicePrincipalRadioSelect": "Vybrat objekty služby",
+ "servicePrincipalSelectionsAria": "Mřížka vybraných objektů služby",
+ "servicePrincipalSelectorAria": "Seznam vybraných objektů služby",
+ "servicePrincipalSelectorMultiple": "Počet vybraných objektů služby: {0}",
+ "servicePrincipalSelectorSingle": "1 vybraný objekt služby",
+ "servicePrincipalSpecificExc": "Konkrétní objekty služby jsou vyloučeny",
+ "servicePrincipalSpecificInc": "Včetně konkrétních objektů služby",
+ "servicePrincipals": "Objekty služby",
+ "sessionControlBladeTitle": "Relace",
+ "sessionControlDescriptionContent": "Umožňuje nastavit přístup podle ovládacích prvků relací, aby bylo možné omezit prostředí v konkrétních cloudových aplikacích.",
+ "sessionControlDisableInfo": "Tento ovládací prvek funguje jen v podporovaných aplikacích. Jedinými cloudovými aplikacemi, které podporují omezení vynucená aplikací, jsou v tuto chvíli Office 365, Exchange Online a SharePoint Online. Další informace získáte kliknutím sem.",
+ "sessionControlInfoBallonText": "Ovládací prvky relací umožňují používat v cloudové aplikaci omezené možnosti.",
+ "sessionControls": "Ovládací prvky relací",
+ "sessionControlsAppEnforcedLabel": "Používat omezení vynucená aplikací",
+ "sessionControlsCasLabel": "Používat Řízení podmíněného přístupu k aplikacím",
+ "sessionControlsSecureSignInLabel": "Vyžadovat vazbu tokenu",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "Zahrnuto: {0}",
+ "signinRiskReauth": "Pokud je vybrané oprávnění typu Vyžadovat vícefaktorové ověřování a řízení relace s frekvencí přihlašování typu pokaždé, musíte vybrat podmínku Riziko přihlašování.",
+ "signinRiskTriggerDescriptionContent": "Vyberte úroveň rizika přihlášení.",
+ "singleTenantServicePrincipalInfoBallonText": "Zásady platí jenom pro instanční objekty jednoho tenanta vlastněné vaší organizací. Další informace získáte kliknutím sem. ",
+ "specificSigninRiskLevelsOption": "Vyberte konkrétní úrovně rizika přihlášení.",
+ "specificUsersExcluded": "konkrétní vyloučení uživatelé",
+ "specificUsersIncluded": "Konkrétní zahrnutí uživatelé",
+ "specificUsersIncludedAndExcluded": "Konkrétní zahrnutí nebo vyloučení uživatelé",
+ "startDatePickerLabel": "Spuštění",
+ "startFreeTrial": "Zahájit bezplatnou zkušební verzi",
+ "startTimePickerLabel": "Počáteční čas",
+ "sunday": "Neděle",
+ "testButton": "What If",
+ "thumbprintCol": "Miniatura",
+ "thursday": "Čtvrtek",
+ "timeConditionAllTimesLabel": "Kdykoli",
+ "timeConditionIntroText": "Nakonfigurujte čas, po který bude tato zásada platit.",
+ "timeConditionSelectorInfoBallonContent": "Kdy se uživatel přihlašuje. Například středa 9:00–17:00 SEČ.",
+ "timeConditionSelectorLabel": "Čas (preview)",
+ "timeConditionSpecificLabel": "Konkrétní časy",
+ "timeSelectorAllTimesText": "Kdykoli",
+ "timeSelectorSpecificTimesText": "Nakonfigurované konkrétní časy",
+ "timeZoneDropdownInfoBalloonContent": "Vyberte časové pásmo, které definuje časový rozsah. Tato zásada platí pro uživatele ve všech časových pásmech. Například středa 9:00–17:00 pro jednoho uživatele by byla středa 10:00–18:00 pro uživatele v jiném časovém pásmu.",
+ "timeZoneDropdownLabel": "Časové pásmo",
+ "timeZoneDropdownPlaceholderText": "Vyberte časové pásmo.",
+ "tooManyPoliciesDescription": "Momentálně se zobrazuje jenom prvních 50 zásad. Další se zobrazíte kliknutím sem.",
+ "tooManyPoliciesTitle": "Našlo se více než 50 zásad",
+ "trustedLocationStatusIconDescription": "Umístění je důvěryhodné.",
+ "trustedLocationStatusIconEnabled": "Ikona stavu důvěryhodnosti",
+ "tuesday": "Úterý",
+ "uploadInBadState": "Zadaný soubor se nepovedlo nahrát.",
+ "upsellAppsDescription": "U citlivých aplikací se bude vyžadovat vícefaktorové ověřování po celou dobu nebo jen při připojování z prostředí mimo firemní síť.",
+ "upsellAppsTitle": "Zabezpečené aplikace",
+ "upsellBannerText": "Abyste mohli použít tuto funkci, získejte bezplatnou zkušební verzi Premium.",
+ "upsellDataDescription": "Pro přístup k prostředkům společnosti se bude vyžadovat, aby zařízení bylo označené jako odpovídající nebo hybridně připojené k Microsoft Entra.",
+ "upsellDataTitle": "Zabezpečená data",
+ "upsellDescription": "Podmíněný přístup poskytuje možnosti řízení a ochranu, které potřebujete k udržování vašich firemních dat v zabezpečeném stavu, a zároveň dává vašim pracovníkům možnosti pro efektivní práci z libovolného zařízení. Můžete například omezit přístup z prostředí mimo firemní síť nebo povolit jen přístup ze zařízení, která splňují vaše zásady dodržování předpisů.",
+ "upsellRiskDescription": "Při rizikových událostech zjištěných systémem strojového učení Microsoftu se bude vyžadovat vícefaktorové ověřování.",
+ "upsellRiskTitle": "Ochrana před rizikem",
+ "upsellTitle": "Podmíněný přístup",
+ "upsellWhyTitle": "Proč používat Podmíněný přístup?",
+ "userAppNoneOption": "Žádný",
+ "userNamePlaceholderText": "Zadat uživatelské jméno",
+ "userNotSetSeletorLabel": "0 vybraných uživatelů a skupin",
+ "userOnlySelectionBladeExcludeDescription": "Vyberte uživatele, kteří se mají z této zásady vyloučit.",
+ "userOrGroupSelectionCountDiffBannerText": "{0} nakonfigurované v těchto zásadách bylo odstraněno z adresáře, ale na ostatní uživatele a skupiny v zásadách to nemá žádný vliv. Až zásady aktualizujete příště, odstranění uživatelé nebo skupiny se automaticky odeberou.",
+ "userOrSPNotSetSelectorLabel": "Počet vybraných identit uživatelů nebo úloh: 0",
+ "userOrSPSelectionBladeTitle": "Identity uživatelů nebo úloh",
+ "userOrSPSelectorInfoBallonText": "Identity v adresáři, na které se zásady vztahují, včetně uživatelů, skupin a objektů služeb",
+ "userRequired": "Je vyžadován uživatel.",
+ "userRiskErrorBox": "Když se vybere oprávnění Požadovat změnu hesla, musí se vybrat podmínka Riziko uživatele.",
+ "userRiskReauth": "Pokud je vybrané oprávnění typu Vyžadovat změnu hesla a řízení relace s frekvencí přihlašování typu pokaždé, musíte vybrat podmínku Riziko uživatele, ne podmínku Riziko přihlašování.",
+ "userSPRequired": "Vyžaduje se uživatel nebo objekt služby.",
+ "userSPSelectorTitle": "Identita uživatele nebo úlohy",
+ "userSelectionBladeAllUsersAndGroups": "Všichni uživatelé a skupiny",
+ "userSelectionBladeExcludeDescription": "Vyberte uživatele, kteří se mají z této zásady vyloučit.",
+ "userSelectionBladeExcludeTabTitle": "Vyloučit",
+ "userSelectionBladeExcludedSelectorTitle": "Vyberte vyloučené uživatele a skupiny.",
+ "userSelectionBladeIncludeDescription": "Vyberte uživatele, na které se tato zásada bude vztahovat.",
+ "userSelectionBladeIncludeTabTitle": "Zahrnout",
+ "userSelectionBladeIncludedSelectorTitle": "Vybrat",
+ "userSelectionBladeSelectUsers": "Vybrat uživatele",
+ "userSelectionBladeSelectedUsers": "Vyberte uživatele a skupiny",
+ "userSelectionBladeTitle": "Uživatelé a skupiny",
+ "userSelectorBladeTitle": "Uživatelé",
+ "userSelectorExcluded": "Vyloučeno: {0}",
+ "userSelectorGroupPlural": "Počet skupin: {0}",
+ "userSelectorGroupSingular": "Počet skupin: 1",
+ "userSelectorIncluded": "Zahrnuto: {0}",
+ "userSelectorInfoBallonText": "Uživatelé a skupiny v adresáři, pro které platí tyto zásady. Třeba pilotní skupina.",
+ "userSelectorSelected": "Počet vybraných: {0}",
+ "userSelectorTitle": "Uživatel",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "Uživatelé aplikace {0}",
+ "userSelectorUserSingular": "Počet uživatelů: 1",
+ "userSelectorWithExclusion": "{0} a {1}",
+ "usersGroupsLabel": "Uživatelé a skupiny",
+ "viewApprovedAppsText": "Zobrazit seznam klientem schválených aplikací",
+ "viewCompliantAppsText": "Zobrazit seznam klientských aplikací chráněných zásadami",
+ "viewPolicyInformation": "Zobrazit informace o zásadě",
+ "vpnBladeTitle": "Připojení VPN",
+ "vpnCertCreateFailedMessage": "Chyba: {0}",
+ "vpnCertCreateFailedTitle": "Nepovedlo se vytvořit {0}",
+ "vpnCertCreateInProgressTitle": "Vytváří se {0}.",
+ "vpnCertCreateSuccessMessage": "Certifikát {0} se úspěšně vytvořil.",
+ "vpnCertCreateSuccessTitle": "Zásady {0} se úspěšně vytvořily.",
+ "vpnCertNoRowsMessage": "Nenašly se žádné certifikáty VPN.",
+ "vpnCertUpdateFailedMessage": "Chyba: {0}",
+ "vpnCertUpdateFailedTitle": "Aplikaci {0} se nepodařilo aktualizovat.",
+ "vpnCertUpdateInProgressTitle": "Aktualizuje se {0}.",
+ "vpnCertUpdateSuccessMessage": "Certifikát {0} se úspěšně aktualizoval.",
+ "vpnCertUpdateSuccessTitle": "Aplikace {0} byla úspěšně aktualizována.",
+ "vpnFeatureInfo": "Další informace o připojení VPN a Podmíněném přístupu získáte, když kliknete sem.",
+ "vpnFeatureWarning": "Jakmile se na portálu vytvoří certifikát VPN, Microsoft Entra ID začne s jeho pomocí okamžitě vystavovat klientovi VPN krátkodobé certifikáty. Je naprosto nezbytné okamžitě nasadit certifikát VPN na server VPN, aby při ověřování přihlašovacích údajů klienta VPN nedošlo k žádným problémům.",
+ "vpnMenuText": "Připojení VPN",
+ "vpncertDropdownDefaultOption": "Doba trvání",
+ "vpncertDropdownInfoBalloonContent": "Vyberte dobu platnosti certifikátu, který chcete vytvořit.",
+ "vpncertDropdownLabel": "Vyberte dobu platnosti",
+ "vpncertDropdownOneyearOption": "1 rok",
+ "vpncertDropdownThreeyearOption": "3 roky",
+ "vpncertDropdownTwoyearOption": "2 roky",
+ "wednesday": "Středa",
+ "whatIfCountry": "Země/oblast",
+ "whatIfCountryInfo": "Země/oblast, ze které se uživatel přihlašuje.",
+ "whatIfDevicePlatformInfo": "Platforma zařízení, ze které se uživatel přihlašuje",
+ "whatIfEnterIpAddress": "Zadat IP adresu (např.: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "Zadaná adresa IP je neplatná.",
+ "whatIfIpAddress": "IP adresa",
+ "whatIfIpAddressInfo": "IP adresa, ze které se uživatel přihlašuje",
+ "whatIfIpCountryInfoBoxText": "Pokud používáte IP adresu nebo zemi/oblast, budou se vyžadovat obě pole, která by si měla vzájemně odpovídat.",
+ "whatIfSelectCountry": "Vyberte zemi nebo oblast…",
+ "whatIfSelectDevicePlatform": "Vybrat platformu zařízení...",
+ "whatIfSelectPrivateLink": "Vyberte Private Link...",
+ "whatIfSelectSignInRisk": "Vyberte riziko přihlášení...",
+ "whatIfSignInRisk": "Riziko přihlášení",
+ "whatIfSignInRiskInfo": "Úroveň rizika přidružená k přihlášení",
+ "whatIfUnknownAreas": "Neznámé oblasti",
+ "windows365InfoBox": "Výběr Windows 365 bude mít vliv na připojení k počítačům Cloud PC a hostitelům relací Azure Virtual Desktopu. Další informace získáte, když kliknete sem.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Identity úloh (Preview)",
+ "workloadIdentitiesLicenseText": "K úpravám těchto zásad se vyžaduje licence P1 nebo P2 k identitám úloh úrovně Premium.",
+ "workloadIdentity": "Identita úlohy"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Přehled"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Hledat podle zařízení, uživatele nebo verze aktualizace pro zvýšení kvality"
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Nepovedlo se načíst profily aktualizace softwaru iOS"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Profil aktualizace iOS",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profil"
+ },
+ "listLoadError": "Profily aktualizace softwaru iOS se nedají načíst. Zkuste to znovu později.",
+ "lowercase": "Zásady aktualizace iOS",
+ "uppercase": "Zásady aktualizace iOS"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Je nám líto, ale nepovedlo se nám spojit s Applem a načíst seznam verzí k dispozici. Zkuste to znovu později nebo pokračujte s nejnovější verzí.",
+ "latestUpdate": "Nejnovější aktualizace",
+ "noLongerSupported": "Vybraná verze se už nepodporuje",
+ "olderVersionSelected": "Protože jste vybrali starší verzi, ujistěte se, jestli použijete zásady omezení zařízení, které pozdrží viditelnost aktualizací softwaru, aby se zařízení neaktualizovala na nejnovější verzi.",
+ "prefix": "Instalovat iOS/iPadOS",
+ "selectSupported": "Vybrat verzi aktualizace podporovanou společností Apple",
+ "updateToInstall": "Aktualizace k instalaci"
+ },
+ "Schedule": {
+ "always": "Aktualizovat při dalším ohlášení",
+ "duringTimeWindows": "Aktualizovat v naplánovaný čas",
+ "header": "Když se k zařízení přiřadí zásady aktualizace, Intune ve výchozím nastavení nasadí nejnovější aktualizace ve chvíli, kdy se zařízení ohlásí. Místo toho můžete vytvořit týdenní plán s vlastními počátečními a koncovými časy. Pokud se rozhodnete, že aktualizace budou probíhat mimo naplánovaný čas, Intune nebude aktualizace nasazovat, dokud naplánovaný čas neskončí.",
+ "infoBalloon": "Kdy dojde k aktualizacím. Pro plánování aktualizací během plánované doby nebo mimo ni je povinný další vstup.",
+ "label": "Typ plánu",
+ "outsideActiveHours": "Aktualizovat mimo dobu aktivního používání (starší verze)",
+ "outsideTimeWindows": "Aktualizovat mimo naplánovaný čas",
+ "timeWindow": "Časové okno",
+ "timeZone": "Časové pásmo",
+ "title": "Aktualizovat nastavení plánu zásad:",
+ "weekly": "Týdenní plán",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "Verze iOS/iPadOS, která se má v čase aktualizace na zařízení nainstalovat.",
+ "label": "Vybrat verzi k instalaci"
+ },
+ "header": "Pokud chcete vynutit, aby přiřazená zařízení automaticky nainstalovala nejnovější aktualizace pro iOS/iPadOS, vytvořte profil. Tato nastavení určují, jak a kdy se budou aktualizace softwaru nasazovat. Tento profil nezabrání uživatelům v ruční aktualizaci operačního systému. Tomu jde až na 90 dní bránit pomocí zásad omezení konfigurace zařízení. Aktualizace se nainstalují jen na zařízení pod dohledem.",
+ "notAvailable": "Není k dispozici"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Nejsou k dispozici žádné zásady aktualizace iOSu, které by se daly zobrazit.",
+ "macOsUpdates": "Nejsou k dispozici žádné zásady aktualizace softwaru pro macOS, které by se daly zobrazit.",
+ "windowsUpdates": "Nejsou k dispozici žádné aktualizační okruhy pro Windows 10 a novější, které by bylo možné zobrazit."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Název zařízení",
+ "deviceUpdateStatus": "Stav aktualizace zařízení",
+ "lastUpdated": "Poslední aktualizace",
+ "osVersion": "Verze OS",
+ "userPrincipalName": "Uživatelské jméno"
+ },
+ "maximumOSVersionFilter": "Maximální verze OS",
+ "minimumOSVersionFilter": "Minimální verze OS",
+ "noData": "Neexistují žádná data, která by bylo možné zobrazit.",
+ "searchBoxPlaceholder": "Hledat podle názvu zařízení, uživatelského jména nebo verze operačního systému",
+ "title": "Souhrn účtu pro zařízení s macOSem"
+ },
+ "Category": {
+ "configurationDataFile": "Soubor s daty konfigurace",
+ "critical": "Kritický",
+ "firmware": "Firmware",
+ "other": "Ostatní"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Poslední aktualizace",
+ "successfulUpdateCount": "Počet nasazených úspěšných aktualizací",
+ "totalUpdateCount": "Celkový počet nasazených aktualizací",
+ "updateCategory": "Kategorie aktualizací",
+ "updateCategoryStatus": "Stav kategorie aktualizací"
+ },
+ "noData": "Neexistují žádná data, která by bylo možné zobrazit."
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Nepovedlo se načíst profily aktualizace softwaru macOS"
+ }
+ },
+ "State": {
+ "available": "K dispozici",
+ "commandFailed": "Chyba příkazu",
+ "downloadFailed": "Neúspěšné stahování",
+ "downloadInsufficientNetwork": "Stahování – nedostatečná síť",
+ "downloadInsufficientPower": "Stahování – nedostatek energie",
+ "downloadInsufficientSpace": "Stahování – nedostatek místa",
+ "downloaded": "Staženo",
+ "downloading": "Stahování",
+ "idle": "Nečinný",
+ "installFailed": "Instalace se nezdařila",
+ "installInsufficientPower": "Instalace – nedostatek energie",
+ "installInsufficientSpace": "Instalace – nedostatek místa",
+ "installing": "Probíhá instalace.",
+ "scheduled": "Naplánováno",
+ "success": "Úspěch",
+ "unknown": "Neznámý"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Poslední aktualizace",
+ "updateName": "Název aktualizace",
+ "updateStatus": "Aktualizovat stav",
+ "version": "Verze"
+ },
+ "noData": "Neexistují žádná data, která by bylo možné zobrazit.",
+ "searchBoxPlaceholder": "Hledat podle názvu nebo verze aktualizace"
+ },
+ "SummaryBlade": {
+ "subtitle": "Profil aktualizace macOS",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profil"
+ },
+ "error": "Chyba",
+ "errorOrErrors": "Chyby",
+ "errors": "Chyby",
+ "listLoadError": "Profily aktualizace softwaru macOS se nedají načíst. Zkuste to znovu později.",
+ "lowercase": "Zásady aktualizace macOS",
+ "other": "Ostatní",
+ "subtitle": "Aktualizace softwaru pro macOS",
+ "upToDate": "Aktuální",
+ "uppercase": "Zásady aktualizace macOS"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Zkuste to prosím znovu později",
+ "title": "Nepovedlo se odstranit {0}."
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Zkuste to prosím znovu později"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Zkuste to prosím znovu později",
+ "title": "Nepodařilo se načíst {0}"
+ },
+ "idWrongFormat": "Poskytnuté ID profilu není v očekávaném formátu."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "Musí být vybrané aspoň jedno časové okno",
+ "tooMany": "Jde nakonfigurovat maximálně 20 časových oken"
+ }
+ },
+ "endDay": "Den ukončení",
+ "endTime": "Koncový čas",
+ "startDay": "Den začátku",
+ "startTime": "Počáteční čas",
+ "timeWindowError": "Vyberte časový interval, který zahrnuje alespoň jednu hodinu."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Nepovedlo se načíst profily aktualizačního okruhu pro Windows 10 a novější."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Aktualizační okruh pro Windows 10 a novější",
+ "title": "Windows Update pro firmy"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 a novější",
+ "title": "Aktualizační okruh pro Windows 10 a novější"
+ },
+ "listLoadError": "Nepovedlo se načíst profily aktualizačního okruhu pro Windows 10 a novější. Zkuste to znovu později.",
+ "lowercase": "Aktualizační kanál",
+ "uppercase": "Aktualizační kanál"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Aktualizovat nastavení zásad",
+ "updateRingSettings": "Nastavení aktualizačního okruhu"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Vytvořit {0}",
+ "edit": "Upravit {0}"
+ }
+ },
+ "notScannedYet": "Zatím nekontrolováno",
+ "outOfDateIosDevices": "Zastaralá zařízení s iOSem"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge verze 77 a novější",
+ "storeApp": "Aplikace pro Store",
+ "office365Suite": "Aplikace Microsoft 365",
+ "microsoftDefenderATP": "Microsoft Defender pro koncový bod",
+ "other": "Ostatní",
+ "webApplication": "Webová aplikace"
+ },
+ "Filters": {
+ "ruleSyntax": "Syntaxe pravidel",
+ "filters": "Filtry"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Vyberte prosím skript zjišťování.",
+ "scriptFileLabel": "Vyberte svůj skript zjišťování"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Když je tato možnost povolena, musí zařízení dodržovat předpisy podle vlastních pravidel definovaných v souboru JSON na základě vlastních dat vrácených z powershellového skriptu zjišťování.",
+ "label": "Custom Compliance se v současné době nabízí ve verzi Preview. Jakmile bude obecně dostupná, můžete ji za další náklady přidat k možnostem licencování, které zahrnují Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Skript",
+ "placeholder": "Kliknutím provedete výběr.",
+ "searchboxPlaceholder": "Hledat podle názvu skriptu",
+ "title": "Vyberte skript zjišťování"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Souhrn vlastních pravidel dodržování předpisů"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Nahrajte a ověřte soubor JSON s nastavením vlastního dodržování předpisů",
+ "noFileSelectedError": "Vyberte prosím soubor JSON.",
+ "parseFileSelectedError": "Soubor JSON není platný."
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Nakonfigurujte PIN kód a požadavky na přihlašovací údaje, které uživatelé musí splnit, aby mohli získat přístup k aplikacím v pracovním kontextu."
+ },
+ "DataProtection": {
+ "infoText": "Tato skupina obsahuje ovládací prvky ochrany před únikem informací (DLP), jako třeba omezení operací vyjmout, kopírovat, vložit a uložit jako. Tato nastavení určují, jak uživatel pracuje s daty v aplikacích."
+ },
+ "DeviceTypes": {
+ "selectOne": "Vyberte alespoň jeden typ zařízení."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Cílit na aplikace na všech typech zařízení"
+ },
+ "infoText": "Zvolte, jak chcete tyto zásady zavést do aplikací na různých zařízeních. Pak přidejte alespoň jednu aplikaci.",
+ "selectOne": "Pokud chcete vytvořit zásady, vyberte alespoň jednu aplikaci."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender pro koncový bod",
+ "androidDeviceOwnerApplications": "Aplikace",
+ "androidDeviceOwnerPolicyMessages": "Vlastní informace o podpoře",
+ "androidForWorkPassword": "Heslo zařízení",
+ "appManagement": "Povolit nebo blokovat aplikace",
+ "applicationGuard": "Ochrana Application Guard v programu Microsoft Defender",
+ "applicationRestrictions": "Omezené aplikace",
+ "applicationVisibility": "Zobrazit nebo skrýt aplikace",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, zobrazování dokumentů, hraní her",
+ "applicationsAndGoogle": "Obchod Google Play",
+ "appsAndExperience": "Aplikace a prostředí",
+ "associatedDomains": "Přidružené domény",
+ "autonomousSingleAppMode": "Autonomní režim jedné aplikace",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Šifrování Windows",
+ "bootOptions": "Možnosti spouštění",
+ "browser": "Prohlížeč",
+ "builtinApps": "Integrované aplikace",
+ "cameras": "Kamery",
+ "cellular": "Mobilní",
+ "cloudAndStorage": "Cloud a úložiště",
+ "cloudPrint": "Cloudová tiskárna",
+ "complianceEmailProfile": "E-mail",
+ "connectedDevices": "Připojená zařízení",
+ "connectivity": "Mobilní síť a připojení",
+ "contentCaching": "Zachytávání obsahu",
+ "controlPanelAndSettings": "Ovládací panely a nastavení",
+ "credentialGuard": "Ochrana Credential Guard v programu Microsoft Defender",
+ "customCompliance": "Vlastní dodržování předpisů",
+ "customConfiguration": "Vlastní konfigurační profil",
+ "customOMASettings": "Vlastní nastavení OMA-URI",
+ "customPreferences": "Soubor preferencí",
+ "dFCISecuritySettings": "Nastavení zabezpečení",
+ "defender": "Antivirová ochrana v programu Microsoft Defender",
+ "defenderAntivirus": "Antivirová ochrana v programu Microsoft Defender",
+ "defenderExploitGuard": "Ochrana Exploit Guard v programu Microsoft Defender",
+ "defenderFirewall": "Brána firewall systému Windows",
+ "defenderLocalSecurityOptions": "Možnosti zabezpečení místního zařízení",
+ "defenderSecurityCenter": "Centrum zabezpečení v programu Microsoft Defender",
+ "deliveryOptimization": "Optimalizace doručení",
+ "derivedCredentialAuthenticationConfiguration": "Odvozené přihlašovací údaje",
+ "deviceExperience": "Možnosti zařízení",
+ "deviceFirmwareConfigurationInterface": "Rozhraní DFCI (Device Firmware Configuration Interface)",
+ "deviceGuard": "Řízení aplikací v programu Microsoft Defender",
+ "deviceHealth": "Stav zařízení",
+ "devicePassword": "Heslo zařízení",
+ "deviceProperties": "Vlastnosti zařízení",
+ "deviceRestrictions": "Obecné",
+ "deviceSecurity": "Zabezpečení systému",
+ "display": "Zobrazit",
+ "domainJoin": "Připojení k doméně",
+ "domains": "Domény",
+ "edgeBrowser": "Microsoft Edge starší verze (verze 45 a starší)",
+ "edgeBrowserSmartScreen": "Filtr SmartScreen v programu Microsoft Defender",
+ "edgeKiosk": "Beznabídkový režim Microsoft Edge",
+ "editionUpgrade": "Upgrade edice",
+ "education": "Vzdělávání",
+ "educationDeviceCerts": "Certifikáty zařízení",
+ "educationStudentCerts": "Certifikáty studentů",
+ "educationTakeATest": "Zkuste si test",
+ "educationTeacherCerts": "Certifikáty učitelů",
+ "emailProfile": "E-mail",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Rozšíření aplikace jednotného přihlašování",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Hry",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Sledování stavu",
+ "homeScreenLayout": "Rozložení domovské obrazovky",
+ "iOSWallpaper": "Tapeta",
+ "importedPFX": "Importovaný certifikát PKCS",
+ "iosDefenderAtp": "Microsoft Defender pro koncový bod",
+ "iosKiosk": "Veřejný terminál",
+ "kernelExtensions": "Rozšíření jádra",
+ "keyboardAndDictionary": "Klávesnice a slovník",
+ "kiosk": "Veřejný terminál",
+ "kioskAndroidEnterprise": "Vyhrazená zařízení",
+ "kioskConfiguration": "Veřejný terminál",
+ "kioskConfigurationV2": "Veřejný terminál",
+ "kioskWebBrowser": "Webový prohlížeč veřejného terminálu",
+ "lockScreenMessage": "Zpráva zamykací obrazovky",
+ "lockedScreenExperience": "Prostředí zamknuté obrazovky",
+ "logging": "Vytváření sestav a telemetrie",
+ "loginItems": "Položky přihlášení",
+ "loginWindow": "Přihlašovací okno",
+ "macDefenderAtp": "Microsoft Defender pro koncový bod",
+ "maintenance": "Údržba",
+ "malware": "Malware",
+ "messaging": "Zasílání zpráv",
+ "microphonesAndSpeakers": "Mikrofony a reproduktory",
+ "networkBoundary": "Ohraničení sítě",
+ "networkProxy": "Síťový proxy server",
+ "notifications": "Oznámení aplikace",
+ "pKCS": "Certifikát PKCS",
+ "password": "Heslo",
+ "personalProfile": "Osobní profil",
+ "personalization": "Přizpůsobení",
+ "policyOverride": "Přepsat zásady skupiny",
+ "ports": "Porty",
+ "powerSettings": "Nastavení napájení",
+ "printer": "Tiskárna",
+ "privacy": "Soukromí",
+ "privacyPerApp": "Výjimky ze zásad ochrany osobních údajů pro jednotlivé aplikace",
+ "privacyPreferences": "Předvolby ochrany osobních údajů",
+ "projection": "Projekce",
+ "radios": "Radiostanice",
+ "sCCMCompliance": "Dodržování předpisů Configuration Manageru",
+ "sCEP": "Certifikát SCEP",
+ "sCEPProperties": "Certifikát SCEP",
+ "sMode": "Přepínač režimů (jen Windows Insider)",
+ "safari": "Safari",
+ "search": "Hledat",
+ "session": "Relace",
+ "sharedDevice": "Sdílený iPad",
+ "sharedPCAccountManager": "Sdílené víceuživatelské zařízení",
+ "singleSignOn": "Jednotné přihlašování",
+ "smartScreen": "Filtr SmartScreen v programu Microsoft Defender",
+ "softwareUpdates": "Nastavení",
+ "start": "Spustit",
+ "systemExtensions": "Systémová rozšíření",
+ "systemSecurity": "Zabezpečení systému",
+ "trustedCert": "Důvěryhodný certifikát",
+ "uEFIAccess": "Přístup k rozhraní UEFI",
+ "updates": "Aktualizace",
+ "userRights": "Uživatelská práva",
+ "usersAndAccounts": "Uživatelé a účty",
+ "vPN": "Základní síť VPN",
+ "vPNApps": "Automatické připojení VPN",
+ "vPNAppsAndTrafficRules": "Aplikace a pravidla přenosů",
+ "vPNConditionalAccess": "Podmíněný přístup",
+ "vPNConnectivity": "Možnosti připojení",
+ "vPNDNSTriggers": "Nastavení DNS",
+ "vPNIKEv2": "Nastavení IKEv2",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Dělené tunelové propojení",
+ "vPNTrustedNetwork": "Detekce důvěryhodných sítí",
+ "wakeSettings": "Nastavení probuzení",
+ "webContentFilter": "Filtr webového obsahu",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender pro koncový bod",
+ "windowsDefenderATP": "Microsoft Defender pro koncový bod",
+ "windowsHelloForBusiness": "Windows Hello pro firmy",
+ "windowsSpotlight": "Windows Spotlight",
+ "wiredNetwork": "Drátová síť",
+ "wireless": "Bezdrátové",
+ "wirelessProjection": "Bezdrátová projekce",
+ "workProfile": "Nastavení pracovního profilu",
+ "workProfilePassword": "Heslo pracovního profilu",
+ "xboxServices": "Služby Xbox",
+ "zebraMx": "Profil MX (pouze Zebra)",
+ "complianceActionsLabel": "Akce při nedodržení předpisů"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Povolené adresy URL",
+ "tooltip": "Zadejte weby, ke kterým mají uživatele přístup v pracovním kontextu. Žádné jiné weby se nepovolí. Můžete si zvolit, že nakonfigurujete buď seznam povolených webů, nebo zakázaných, ale ne oba. "
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Proxy aplikací",
+ "title": "Přesměrování proxy aplikací",
+ "tooltip": "Povolí přesměrování proxy aplikací, aby uživatelé měli přístup k firemním odkazům a místním webovým aplikacím."
+ },
+ "BlockedURLs": {
+ "title": "Blokované adresy URL",
+ "tooltip": "Zadejte weby, které mají uživatele v pracovním kontextu zablokované. Všechny ostatní weby se povolí. Můžete si zvolit, že nakonfigurujete buď seznam povolených webů, nebo zakázaných, ale ne oba. "
+ },
+ "Bookmarks": {
+ "header": "Spravované záložky",
+ "tooltip": "Zadejte seznam adres URL uložených mezi záložky, které vaši uživatelé budou mít k dispozici, když ve svém pracovním kontextu budou používat Microsoft Edge.",
+ "uRL": "Adresa URL"
+ },
+ "HomepageURL": {
+ "header": "Spravovaná domovská stránka",
+ "title": "Adresa URL zástupce domovské stránky",
+ "tooltip": "Nakonfigurujte zástupce domovské stránky, který se uživatelům zobrazí jako první ikona pod panelem hledání, až v Microsoft Edgi otevřou novou záložku."
+ },
+ "PersonalContext": {
+ "label": "Přesměrovat servery s omezeným přístupem na osobní kontext",
+ "tooltip": "Nakonfigurujte, jestli uživatelé můžou přecházet na osobní kontext, aby mohli otevřít omezené weby."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "SKU Windows Home",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Vyberte počet bitů obsažených v klíči.",
- "keyUsage": "Zadejte kryptografickou akci, která se vyžaduje k výměně veřejného klíče certifikátu.",
- "renewalThreshold": "Zadejte procento (mezi 1 a 99 procenty) povolené zbývající živostnosti certifikátu, než zařízení může požádat o prodloužení jeho platnosti. Doporučená hodnota pro Intune je 20 %. (1-99)",
- "rootCert": "Zvolte dříve nakonfigurovaný a přiřazený profil kořenového certifikátu CA. Certifikát CA musí odpovídat kořenovému certifikátu certifikační autority, která vystavila certifikát pro tento profil (ten, který v tuto chvíli konfigurujete).",
- "scepServerUrl": "Zadejte adresu URL pro server NDES, který vystavuje certifikáty prostřednictvím SCEP (musí se jednat o HTTPS). Například https://contoso.com/certsrv/mscep/mscep.dll.",
- "scepServerUrls": "Přidejte nejméně jednu adresu URL pro server NDES, který vystavuje certifikáty prostřednictvím SCEP (musí se jednat o HTTPS). Např. https://contoso.com/certsrv/mscep/mscep.dll.",
- "subjectAlternativeName": "Alternativní název subjektu",
- "subjectNameFormat": "Formát názvu subjektu",
- "validityPeriod": "Čas zbývající do vypršení platnosti certifikátu. Zadejte hodnotu, která je nižší nebo rovna období platnosti, které se zobrazuje v šabloně certifikátu. Výchozí hodnota je nastavená na jeden rok."
- },
- "appInstallContext": "Tato možnost určuje kontext instalace, který se přidruží k této aplikaci. U aplikací v duálním režimu vyberte požadovaný kontext pro tuto aplikaci. Pro všechny ostatní aplikace se tato hodnota vybere předem podle balíčku a nedá se upravit.",
- "autoUpdateMode": "Nakonfigurujte prioritu aktualizace pro aplikaci. Vyberte „Výchozí“, pokud chcete vyžadovat, aby bylo zařízení před aktualizací aplikace připojeno k síti Wi-Fi, nabíjelo se a nebylo aktivně používáno. Vyberte „Vysoká priorita“, pokud se má aplikace aktualizovat hned, jakmile vývojář aplikaci publikuje, bez ohledu na stav nabíjení, připojení k síti Wi-Fi nebo aktivitu koncového uživatele na zařízení. Výběrem možnosti Odloženo zrušíte aktualizace aplikací až na 90 dní. Vysoká priorita a odložení se projeví pouze u zařízení DO.",
- "configurationSettingsFormat": "Text formátu nastavení konfigurace",
- "ignoreVersionDetection": "Pro aplikace, které automaticky aktualizuje jejich vývojář (třeba Google Chrome), nastavte tuto možnost na Ano.",
- "ignoreVersionDetectionMacOSLobApp": "Vyberte Ano pro aplikace, které vývojář aplikace aktualizuje automaticky, nebo pro kontrolu bundleID aplikace před instalací. Pokud chcete před instalací zkontrolovat bundleID i číslo verze aplikace, vyberte možnost Ne.",
- "installAsManagedMacOSLobApp": "Toto nastavení se použije jenom na macOS 11 a vyšší. V macOS 10.15 a nižším se aplikace nainstaluje, ale nebude spravovaná.",
- "installContextDropdown": "Vyberte příslušný kontext instalace. Kontext uživatele nainstaluje aplikaci jen pro cílové uživatele, kdežto kontext zařízení nainstaluje aplikaci pro všechny uživatele daného zařízení.",
- "ldapUrl": "Toto je název hostitele protokolu LDAP, kde můžu klienti získat veřejné šifrovací klíče pro příjemce e-mailů. E-maily se zašifrují, když je k dispozici klíč. Podporované formáty:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Vyberte oprávnění modulu runtime pro přidružené aplikace.",
- "policyAssociatedApp": "Vyberte aplikaci, ke které se tyto zásady přidruží.",
- "policyConfigurationSettings": "Vyberte metodu, pomocí které chcete definovat nastavení konfigurace těchto zásad.",
- "policyDescription": "Případně můžete také zadat popis těchto zásad konfigurace.",
- "policyEnrollmentType": "Určete, jestli se tato nastavení mají spravovat prostřednictvím správy zařízení, nebo aplikací vytvořených s použitím sady Intune SDK.",
- "policyName": "Zadejte název zásad konfigurace.",
- "policyPlatform": "Vyberte platformu, které se budou tyto zásady konfigurace aplikací týkat.",
- "policyProfileType": "Vyberte typy profilů zařízení, na které se bude tento konfigurační profil aplikace vztahovat",
- "policySMime": "Nakonfigurujte nastavení šifrování a podepisování S/MIME pro Outlook.",
- "sMimeDeployCertsFromIntune": "Zadejte, jestli se z Intune budou doručovat certifikáty S/MIME, aby se mohly používat v Outlooku.\r\nIntune může automaticky nasazovat podpisové a šifrovací certifikáty uživatelům přes Portál společnosti.",
- "sMimeEnable": "Zadejte, jestli se při vytváření e-mailu povolí ovládací prvky S/MIME.",
- "sMimeEnableAllowChange": "Určuje, jestli uživatel může měnit nastavení Povolit standard S/MIME.",
- "sMimeEncryptAllEmails": "Zadejte, jestli musí být všechny e-maily šifrované, nebo ne.\r\nŠifrování převádí data na šifrovaný text, aby si je mohl přečíst jen zamýšlený příjemce.",
- "sMimeEncryptAllEmailsAllowChange": "Určuje, jestli uživatel může měnit nastavení Šifrovat všechny e-maily.",
- "sMimeEncryptionCertProfile": "Zadejte profil certifikátu pro šifrování e-mailů.",
- "sMimeSignAllEmails": "Zadejte, jestli musí být všechny e-maily podepsané.\r\nDigitální podpis ověřuje pravost e-mailu a zajišťuje, že se během přenosu nezmění jeho obsah.",
- "sMimeSignAllEmailsAllowChange": "Určuje, jestli uživatel může měnit nastavení Podepsat všechny e-maily.",
- "sMimeSigningCertProfile": "Zadejte profil certifikátu pro podepisování e-mailů.",
- "sMimeUserNotificationType": "Způsob, jak uživatelům oznámit, že k získání certifikátů S/MIME pro Outlook musí otevřít Portál společnosti"
- },
+ "Languages": {
+ "ar-aE": "Arabština (Spojené arabské emiráty)",
+ "ar-bH": "Arabština (Bahrajn)",
+ "ar-dZ": "Arabština (Alžírsko)",
+ "ar-eG": "Arabština (Egypt)",
+ "ar-iQ": "Arabština (Irák)",
+ "ar-jO": "Arabština (Jordánsko)",
+ "ar-kW": "Arabština (Kuvajt)",
+ "ar-lB": "Arabština (Libanon)",
+ "ar-lY": "Arabština (Libye)",
+ "ar-mA": "Arabština (Maroko)",
+ "ar-oM": "Arabština (Omán)",
+ "ar-qA": "Arabština (Katar)",
+ "ar-sA": "arabština (Saúdská Arábie)",
+ "ar-sY": "Arabština (Sýrie)",
+ "ar-tN": "Arabština (Tunisko)",
+ "ar-yE": "Arabština (Jemen)",
+ "az-cyrl": "Ázerbájdžánština (cyrilice, Ázerbájdžán)",
+ "az-latn": "Ázerbájdžánština (latinka, Ázerbájdžán)",
+ "bn-bD": "Bengálština (Bangladéš)",
+ "bn-iN": "Bengálština (Indie)",
+ "bs-cyrl": "Bosenština (cyrilice)",
+ "bs-latn": "Bosenština (latinka)",
+ "zh-cN": "Čínština (ČLR)",
+ "zh-hK": "Čínština (Hongkong – zvláštní administrativní oblast)",
+ "zh-mO": "Čínština (Macao – zvláštní administrativní oblast)",
+ "zh-sG": "čínština (Singapur)",
+ "zh-tW": "Čínština (Tchaj-wan)",
+ "hr-bA": "Chorvatština (latinka)",
+ "hr-hR": "chorvatština (Chorvatsko)",
+ "nl-bE": "Nizozemština (Belgie)",
+ "nl-nL": "nizozemština (Nizozemsko)",
+ "en-aU": "Angličtina (Austrálie)",
+ "en-bZ": "Angličtina (Belize)",
+ "en-cA": "Angličtina (Kanada)",
+ "en-cabn": "Angličtina (Karibská oblast)",
+ "en-iE": "Angličtina (Irsko)",
+ "en-iN": "Angličtina (Indie)",
+ "en-jM": "Angličtina (Jamajka)",
+ "en-mY": "Angličtina (Malajsie)",
+ "en-nZ": "Angličtina (Nový Zéland)",
+ "en-pH": "Angličtina (Filipínská republika)",
+ "en-sG": "Angličtina (Singapur)",
+ "en-tT": "Angličtina (Trinidad a Tobago)",
+ "en-uK": "angličtina (Spojené království)",
+ "en-uS": "angličtina (Spojené státy)",
+ "en-zA": "Angličtina (Jihoafrická republika)",
+ "en-zW": "Angličtina (Zimbabwe)",
+ "fr-bE": "Francouzština (Belgie)",
+ "fr-cA": "francouzština (Kanada)",
+ "fr-cH": "Francouzština (Švýcarsko)",
+ "fr-fR": "francouzština (Francie)",
+ "fr-lU": "Francouzština (Lucembursko)",
+ "fr-mC": "Francouzština (Monako)",
+ "de-aT": "Němčina (Rakousko)",
+ "de-cH": "Němčina (Švýcarsko)",
+ "de-dE": "němčina (Německo)",
+ "de-lI": "Němčina (Lichtenštejnsko)",
+ "de-lU": "Němčina (Lucembursko)",
+ "iu-cans": "Inuktitutština (slabičné písmo, Kanada)",
+ "iu-latn": "Inuktitutština (latinka, Kanada)",
+ "it-cH": "Italština (Švýcarsko)",
+ "it-iT": "italština (Itálie)",
+ "ms-bN": "Malajština (Sultanát Brunej)",
+ "ms-mY": "Malajština (Malajsie)",
+ "mn-cN": "Mongolština (tradiční mongolština, ČLR)",
+ "mn-mN": "Mongolština (cyrilice, Mongolsko)",
+ "no-nB": "norština, Bokmål (Norsko)",
+ "no-nn": "Norština, Nynorsk (Norsko)",
+ "pt-bR": "portugalština (Brazílie)",
+ "pt-pT": "portugalština (Portugalsko)",
+ "quz-bO": "Kečuánština (Bolívie)",
+ "quz-eC": "Kečuánština (Ekvádor)",
+ "quz-pE": "Kečuánština (Peru)",
+ "smj-nO": "Sámština (lulejská, Norsko)",
+ "smj-sE": "Sámština (lulejská, Švédsko)",
+ "se-fI": "Sámština (severní, Finsko)",
+ "se-nO": "Sámština (severní, Norsko)",
+ "se-sE": "Sámština (severní, Švédsko)",
+ "sma-nO": "Sámština (jižní, Norsko)",
+ "sma-sE": "Sámština (jižní, Švédsko)",
+ "smn": "Sámština (inarijská, Finsko)",
+ "sms": "Sámština (skoltská, Finsko)",
+ "sr-Cyrl-bA": "Srbština (cyrilice)",
+ "sr-Cyrl-rS": "Srbština (cyrilice, Srbsko a Černá hora)",
+ "sr-Latn-bA": "srbština (latinka)",
+ "sr-Latn-rS": "srbština (latinka, Srbsko)",
+ "dsb": "Dolnolužická srbština (Německo)",
+ "hsb": "Hornolužická srbština (Německo)",
+ "es-es-tradnl": "Španělština (Španělsko; tradiční řazení)",
+ "es-aR": "Španělština (Argentina)",
+ "es-bO": "Španělština (Bolívie)",
+ "es-cL": "Španělština (Chile)",
+ "es-cO": "Španělština (Kolumbie)",
+ "es-cR": "Španělština (Kostarika)",
+ "es-dO": "Španělština (Dominikánská republika)",
+ "es-eC": "Španělština (Ekvádor)",
+ "es-eS": "Španělština (Španělsko)",
+ "es-gT": "Španělština (Guatemala)",
+ "es-hN": "Španělština (Honduras)",
+ "es-mX": "Španělština (Mexiko)",
+ "es-nI": "Španělština (Nikaragua)",
+ "es-pA": "Španělština (Panama)",
+ "es-pE": "Španělština (Peru)",
+ "es-pR": "Španělština (Portoriko)",
+ "es-pY": "Španělština (Paraguay)",
+ "es-sV": "Španělština (Salvador)",
+ "es-uS": "Španělština (Spojené státy)",
+ "es-uY": "Španělština (Uruguay)",
+ "es-vE": "Španělština (Venezuela)",
+ "sv-fI": "Švédština (Finsko)",
+ "uz-cyrl": "Uzbečtina (cyrilice, Uzbekistán)",
+ "uz-latn": "Uzbečtina (latinka, Uzbekistán)",
+ "af": "Afrikánština (Jihoafrická republika)",
+ "sq": "Albánština (Albánie)",
+ "am": "Amharšina (Etiopie)",
+ "hy": "Arménština (Arménie)",
+ "as": "Ásámština (Indie)",
+ "ba": "Baškirština (Rusko)",
+ "eu": "Baskičtina (Baskičtina)",
+ "be": "Běloruština (Bělorusko)",
+ "br": "Bretonština (Francie)",
+ "bg": "bulharština (Bulharsko)",
+ "ca": "Katalánština (Katalánština)",
+ "co": "Korsičtina (Francie)",
+ "cs": "čeština (Česká republika)",
+ "da": "dánština (Dánsko)",
+ "dv": "Divehština (Maledivy)",
+ "et": "estonština (Estonsko)",
+ "fo": "Faerština (Faerské ostrovy)",
+ "fil": "Filipínština (Filipíny)",
+ "fi": "finština (Finsko)",
+ "gl": "Galicijština (Galicie)",
+ "ka": "Gruzínština (Gruzie)",
+ "el": "Řečtina (Řecko)",
+ "gu": "Gudžarátština (Indie)",
+ "ha": "Hauština (latinka, Nigérie)",
+ "he": "hebrejština (Izrael)",
+ "hi": "Hindština (Indie)",
+ "hu": "maďarština (Maďarsko)",
+ "is": "Islandština (Island)",
+ "ig": "Igboština (Nigérie)",
+ "id": "Indonéština (Indonésie)",
+ "ga": "Irština (Irsko)",
+ "xh": "Isi-xhoština (Jihoafrická republika)",
+ "zu": "Zuluština (Jihoafrická republika)",
+ "ja": "japonština (Japonsko)",
+ "kn": "Kannadština (Indie)",
+ "kk": "Kazaština (Kazachstán)",
+ "km": "Khmérština (Kambodža)",
+ "rw": "Kiňarwandština (Rwanda)",
+ "sw": "Svahilština (Keňa)",
+ "kok": "Konkánština (Indie)",
+ "ko": "korejština (Korea)",
+ "ky": "Kyrgyzština (Kyrgyzstán)",
+ "lo": "Laština (Laoská lidově demokratická republika)",
+ "lv": "lotyština (Lotyšsko)",
+ "lt": "litevština (Litva)",
+ "lb": "Lucemburština (Lucembursko)",
+ "mk": "Makedonština (Severní Makedonie)",
+ "ml": "Malajálamština (Indie)",
+ "mt": "Maltština (Malta)",
+ "mi": "Maorština (Nový Zéland)",
+ "mr": "Maráthština (Indie)",
+ "moh": "Mohawkština (Mohawkové)",
+ "ne": "Nepálština (Nepál)",
+ "oc": "Okcitánština (Francie)",
+ "or": "Udijština (Indie)",
+ "ps": "Paštština (Afghánistán)",
+ "fa": "Perština",
+ "pl": "polština (Polsko)",
+ "pa": "Paňdžábština (Indie)",
+ "ro": "rumunština (Rumunsko)",
+ "rm": "Rétorománština (Švýcarsko)",
+ "ru": "ruština (Rusko)",
+ "sa": "Sanskrt (Indie)",
+ "st": "Severní sotština (Jihoafrická republika)",
+ "tn": "Setswanština (Jihoafrická republika)",
+ "si": "Sinhálština (Srí Lanka)",
+ "sk": "slovenština (Slovensko)",
+ "sl": "slovinština (Slovinsko)",
+ "sv": "švédština (Švédsko)",
+ "syr": "Syrština (Sýrie)",
+ "tg": "Tádžičtina (cyrilice, Tádžikistán)",
+ "ta": "Tamilština (Indie)",
+ "tt": "Tatarština (Rusko)",
+ "te": "Telugština (Indie)",
+ "th": "thajština (Thajsko)",
+ "bo": "Tibetština (ČLR)",
+ "tr": "turečtina (Turecko)",
+ "tk": "Turkménština (Turkmenistán)",
+ "uk": "ukrajinština (Ukrajina)",
+ "ur": "Urdština (Islámská republika Pákistán)",
+ "vi": "Vietnamština (Vietnam)",
+ "cy": "Velština (Spojené království)",
+ "wo": "Wolofština (Senegal)",
+ "ii": "Yi (ČLR)",
+ "yo": "Jorubština (Nigérie)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Předdefinovaná role",
+ "customCloudPCRole": "Vlastní role Windows 365",
+ "customIntuneRole": "Vlastní role Intune",
+ "customRole": "Vlastní role"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "Verze aplikace",
+ "dependencyName": "Název závislosti",
+ "lastModifiedTime": "Čas poslední změny",
+ "relationship": "Vztah",
+ "replaced": "Nahrazeno",
+ "searchPlaceholder": "Filtrovat podle názvu aplikace",
+ "status": "Podrobnosti stavu",
+ "statusDetails": "Stav",
+ "supersedenceName": "Název nahrazování"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Podřízená závislost",
+ "indirectSupersedence": "Nesouvisejí přímo",
+ "supersedenceAncestors": "Nahrazuje se",
+ "supersedenceDescendants": "Nahrazeno"
+ },
+ "SupersededReplaced": {
+ "no": "Ne",
+ "yes": "Ano"
+ },
+ "Tabs": {
+ "chart": "Graf",
+ "dependency": "Závislost",
+ "label": "Zobrazit: ",
+ "supersedence": "Nahrazování",
+ "table": "Tabulka"
+ },
+ "dependencyGraphAriaLabel": "Graf závislostí aplikací",
+ "supersedenceGraphAriaLabel": "Graf nahrazování aplikací"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Počet dní čekání před vynucením restartování"
+ },
+ "Description": {
+ "label": "Popis"
+ },
+ "Name": {
+ "label": "Název"
+ },
+ "QualityUpdateRelease": {
+ "label": "Urychleně zpracovat instalaci aktualizací pro zvýšení kvality, pokud je verze operačního systému zařízení nižší než:"
+ },
+ "bladeTitle": "Aktualizace pro zvýšení kvality pro systém Windows 10 a novější (Preview)",
+ "loadError": "Načítání selhalo."
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Nastavení"
+ },
+ "infoBoxText": "Jediným vyhrazeným ovládacím prvkem aktualizace pro zvýšení kvality, který je kromě stávající zásady aktualizačního okruhu pro systém Windows 10 a novější aktuálně k dispozici, je možnost urychleně zpracovat aktualizace pro zvýšení kvality na zařízeních, která překračují zadanou úroveň opravy. Další ovládací prvky budou k dispozici v budoucnu.",
+ "licenseLearnMoreText": "Přečtěte si další informace o požadavcích a zásadách aktualizace pro zvýšení kvality.",
+ "licenseWarningBoxText": "Vytváření zásad aktualizace pro zvýšení kvality vyžaduje konkrétní licencování.",
+ "warningBoxText": "I když urychlené zpracování aktualizací softwaru můžete zkrátit čas na to, aby se v případě potřeby dosáhlo shody s předpisy, má větší dopad na produktivitu koncového uživatele. Výrazně se zvýší pravděpodobnost, že během pracovní doby dojde k restartování."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "Na Androidu můžete povolit možnost používat identifikaci na základě otisku prstu místo PIN kódu. Když uživatelé budou chtít získat přístup k této aplikaci přes svoje pracovní účty, zobrazí se jim výzva, aby poskytli svoje otisky prstů.",
+ "iOS": "Na zařízeních s iOS/iPadOS můžete namísto PIN kódu povolit identifikaci pomocí otisku prstu. Při přístupu uživatelů k této aplikaci pomocí pracovního účtu se zobrazí výzva k načtení otisku prstu.",
+ "mac": "Na zařízeních s Macem můžete namísto PIN kódu povolit identifikaci pomocí otisku prstu. Při přístupu uživatelů k této aplikaci pomocí pracovního účtu se zobrazí výzva k načtení otisku prstu."
+ },
+ "allowWidgetContentSync": "Pokud chcete aplikacím spravovaným zásadami zabránit v ukládání dat do widgetů aplikací, zvolte Blokovat. Pokud zvolíte Povolit, může aplikace spravovaná zásadami ukládat data do widgetů aplikací, pokud jsou tyto funkce podporované a povolené v aplikaci spravované zásadami. \r\n\r\n \r\n\r\nAplikace můžou poskytovat další možnosti konfigurace se zásadami konfigurace aplikací. Další informace najdete v dokumentaci k aplikaci.",
+ "appSharingFromLevel1": "Pokud chcete určit, ze kterých aplikací může tato aplikace přijímat data, vyberte jednu z následujících možností:",
+ "appSharingFromLevel2": "{0}: Povolí přijímat v dokumentech a účtech organizace jen data z jiných aplikací spravovaných zásadami.",
+ "appSharingFromLevel3": "{0}: Povolí přijímat v dokumentech a účtech organizace data z jakékoli aplikace.",
+ "appSharingFromLevel4": "{0}: Nepovolí přijímat v dokumentech a účtech organizace data z jakékoli aplikace.",
+ "appSharingFromLevel5": "{0}: Povolit přenos dat z jakékoli aplikace a považovat všechna příchozí data bez identity uživatele za data organizace",
+ "appSharingToLevel1": "Pokud chcete určit, kterým aplikacím může tato aplikace posílat data, vyberte jednu z následujících možností:",
+ "appSharingToLevel2": "{0}: Povolí posílat data organizace jen do jiných aplikací spravovaných zásadami.",
+ "appSharingToLevel3": "{0}: Povolí posílat data organizace do jakékoli aplikace.",
+ "appSharingToLevel4": "{0}: Nepovolí posílat data organizace do žádné aplikace.",
+ "appSharingToLevel5": "{0}: Povolit přenos jen do jiných aplikací spravovaných zásadami a přenos souborů do ostatních aplikací spravovaných pomocí MDM na registrovaných zařízeních",
+ "appSharingToLevel6": "{0}: Povolit přenos jen do jiných aplikací spravovaných zásadami a filtrovat dialogy operačního systému pro otevření v určité aplikaci nebo pro sdílení tak, aby zobrazovaly jen aplikace spravované zásadami",
+ "assignmentFilterEdit1": "Pokud u této zásady použijete filtry přiřazení, použije se na stránce „Aplikace“ kromě hodnot zadaných pro „Cílit na aplikace na všech typech zařízení“ a „Typy zařízení“ také vlastnost „Typ správy zařízení“.",
+ "assignmentFilterEdit2": "Další informace o přiřazování zásad ochrany aplikací.",
+ "conditionalEncryption1": "Vyberte {0}, pokud chcete zakázat šifrování aplikací pro interní úložiště aplikací, když se na zaregistrovaném zařízení zjistí šifrování zařízení.",
+ "conditionalEncryption2": "Poznámka: Intune může detekovat pouze registraci zařízení pomocí Intune MDM. Externí úložiště aplikací se bude i nadále šifrovat, aby se zajistilo, že k datům nebudou mít přístup nespravované aplikace.",
+ "contactSyncMac": "Když se tato možnost zakáže, aplikace nebudou moct ukládat kontakty do nativního adresáře.",
+ "contactsSync": "Pokud chcete zabránit aplikacím spravovaným zásadami ukládat data do nativních aplikací na zařízeních (jako jsou Kontakty, Kalendář a widgety) nebo pokud chcete zabránit používání doplňků v aplikacích spravovaných zásadami, zvolte Blokovat. Pokud zvolíte Povolit, může aplikace spravovaná zásadami ukládat data do nativních aplikací nebo používat doplňky, pokud jsou tyto funkce v aplikaci spravované zásadami podporovány a povoleny.
Aplikace můžou poskytovat další možnosti konfigurace pomocí zásad pro konfiguraci aplikací. Další informace najdete v dokumentaci k aplikaci.",
+ "deviceTypeTargetingCreate1": "Cílení na typ zařízení se přesunulo do kroku Přiřazení ve vytváření zásad.",
+ "deviceTypeTargetingEdit1": "Pokud u této zásady použijete filtry přiřazení, použije se na stránce „Aplikace“ kromě hodnot zadaných pro „Cílit na aplikace na všech typech zařízení“ a „Typy zařízení“ také vlastnost „Typ správy zařízení“.",
+ "deviceTypeTargetingEdit2": "Pokud chcete upravit cílení na typ správy zařízení, resetujte možnost „Cílit na aplikace na všech typech zařízení“ = „Ano“. Pak vytvořte filtr přiřazení MAM s požadovanými hodnotami pro „Typ správy zařízení“.",
+ "deviceTypeTargetingHasMoved": "Další informace o přiřazování zásad ochrany aplikací",
+ "encryptionAndroid1": "U aplikací přidružených k zásadě správy mobilních aplikací Intune poskytuje šifrování společnost Microsoft. Data se šifrují synchronně během V/V operací se soubory podle nastavení v zásadě správy mobilních aplikací. Spravované aplikace na Androidu používají šifrování AES-128 v režimu CBC s využitím kryptografických knihoven platformy. Metoda šifrování nedodržuje standard FIPS 140-2. Šifrování SHA-256 se podporuje jako explicitní příkaz prostřednictvím parametru SigAlg a je funkční jenom na zařízeních 4.2 a novějších. Obsah v úložišti zařízení se šifruje vždy.",
+ "encryptionAndroid2": "Pokud ve vaší zásadě aplikace vyžadujete šifrování, musí koncový uživatel nastavit a používat PIN kód pro přístup k zařízení. Pokud není PIN kód pro přístup k zařízení nastavený, aplikace se nespustí a koncovému uživateli se místo toho zobrazí zpráva s informacemi o tom, že jeho společnost vyžaduje, aby pro přístup k dané aplikaci nejprve povolil PIN kód zařízení.",
+ "encryptionMac1": "U aplikací přidružených k zásadě správy mobilních aplikací Intune poskytuje šifrování společnost Microsoft. Data se šifrují synchronně během V/V operací se soubory podle nastavení v zásadě správy mobilních aplikací. Spravované aplikace na Macu používají šifrování AES-128 v režimu CBC s využitím kryptografických knihoven platformy. Metoda šifrování nedodržuje standard FIPS 140-2. Šifrování SHA-256 se podporuje jako explicitní příkaz prostřednictvím parametru SigAlg a je funkční jenom na zařízeních 4.2 a novějších. Obsah v úložišti zařízení se šifruje vždy.",
+ "faceId1": "Tam, kde je to možné, můžete povolit, aby se místo PIN kódu používala identifikace tváře. Až uživatelé budou přistupovat k této aplikaci a svým pracovním účtům, zobrazí se jim výzva, aby poskytli identifikaci tváře.",
+ "faceId2": "Pokud chcete pro přístup k aplikaci povolit identifikaci tváře namísto PIN kódu, vyberte Ano.",
+ "managementLevelsAndroid1": "Pomocí této možnosti můžete zadat, jestli tyto zásady platí pro zařízení správce zařízení s Androidem, zařízení s Android Enterprise nebo pro nespravovaná zařízení.",
+ "managementLevelsAndroid2": "{0}: Nespravovaná zařízení jsou zařízení, na kterých se nezjistila správa Intune MDM. Do toho patří i dodavatelé MDM třetích stran.",
+ "managementLevelsAndroid3": "{0}: Zařízení spravovaná v Intune používající rozhraní API pro správu zařízení s Androidem.",
+ "managementLevelsAndroid4": "{0}: Zařízení spravovaná v Intune používající pracovní profily Android Enterprise nebo úplnou správu zařízení Android Enterprise.",
+ "managementLevelsIos1": "Pomocí této možnosti můžete zadat, jestli tyto zásady platí pro spravovaná zařízení MDM, nebo pro nespravovaná zařízení.",
+ "managementLevelsIos2": "{0}: Nespravovaná zařízení jsou zařízení, na kterých se nezjistila správa Intune MDM. Do toho patří i dodavatelé MDM třetích stran.",
+ "managementLevelsIos3": "{0}: Spravovaná zařízení se spravují pomocí Intune MDM.",
+ "minAppVersion": "Definujte číslo minimální požadované verze aplikace, kterou by uživatel měl používat, aby získal k aplikaci zabezpečený přístup.",
+ "minAppVersionWarning": "Definujte číslo minimální doporučené verze aplikace, kterou by uživatel měl používat pro zabezpečený přístup k aplikaci.",
+ "minOsVersion": "Definujte číslo minimální požadované verze operačního systému, kterou by uživatel měl používat, aby získal k aplikaci zabezpečený přístup.",
+ "minOsVersionWarning": "Definujte číslo minimální doporučené verze operačního systému, kterou by uživatel měl používat, aby získal k aplikaci zabezpečený přístup.",
+ "minPatchVersion": "Definujte nejstarší požadovanou úroveň opravy zabezpečení Androidu, kterou uživatel může mít, aby mohl získat zabezpečený přístup k aplikaci.",
+ "minPatchVersionWarning": "Definujte nejstarší doporučenou úroveň opravy zabezpečení Androidu, kterou uživatel může mít, aby měl zabezpečený přístup k aplikaci.",
+ "minSdkVersion": "Definujte minimální požadovanou verzi sady Intune Application Protection Policy SDK, kterou by uživatel měl používat, aby získal k aplikaci zabezpečený přístup.",
+ "requireAppPinDefault": "
Pokud chcete zakázat PIN kód aplikace, když se na zaregistrovaném zařízení zjistí zámek, vyberte Ano.
",
+ "targetAllApps1": "Pomocí této možnosti můžete své zásady zacílit na aplikace a zařízení v jakémkoli stavu správy.",
+ "targetAllApps2": "Pokud má uživatel zásady, které cílí na konkrétní stav správy, toto nastavení se při řešení konfliktů zásad nahradí.",
+ "touchId2": "Pokud chcete, aby se pro přístup k aplikaci místo PIN kódu vyžadovala identifikace pomocí otisku prstu, zvolte {0}."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Zadejte počet dní, který musí uplynout, než bude potřeba, aby uživatel PIN kód resetoval.",
+ "previousPinBlockCount": "Toto nastavení určuje počet předchozích kódů PIN, které Intune zachová. Všechny nové PIN kódy se musí lišit od těch, které Intune zachovává."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Tato možnost umožní službě Windows Search nadále hledat v šifrovaných datech.",
+ "authoritativeIpRanges": "Toto nastavení povolte, pokud chcete přepsat automatické zjišťování rozsahů IP adres ve Windows.",
+ "authoritativeProxyServers": "Toto nastavení povolte, pokud chcete přepsat automatické zjišťování rozsahů proxy serverů ve Windows.",
+ "checkInput": "Zkontrolovat platnost vstupu",
+ "dataRecoveryCert": "Certifikát pro obnovení je speciální certifikát systému souborů EFS (Encrypting File System), který můžete použít k obnovení šifrovaných souborů v případě, že se ztratí nebo poškodí váš šifrovací klíč. Potřebujete k tomu vytvořit certifikát pro obnovení a zadat ho tady. Další informace najdete tady.",
+ "enterpriseCloudResources": "
Zadejte cloudové prostředky, které se budou považovat za firemní a budou se chránit pomocí zásad Windows Information Protection. Pokud chcete zadat více prostředků, oddělte jednotlivé záznamy znakem |.
Pokud máte ve společnosti nakonfigurované proxy, můžete zadat proxy server, přes který se bude směrovat provoz k vámi zadaným cloudovým prostředkům.
URL[,Proxy]|URL[,Proxy]
Bez proxy: contoso.sharepoint.com|contoso.visualstudio.com S proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Zadejte rozsahy IPv4, které tvoří vaši firemní síť. Tyto rozsahy spolu s názvy podnikových síťových domén, které zadáte, definují ohraničení firemní sítě.
Toto nastavení vyžaduje, aby byla povolená služba Windows Information Protection.
Pokud chcete zadat více záznamů, oddělejte jednotlivé záznamy čárkou.
Zadejte rozsahy IPv6, které tvoří vaši firemní síť. Tyto rozsahy spolu s názvy podnikových síťových domén, které zadáte, definují ohraničení firemní sítě.
Pokud chcete zadat více záznamů, oddělte jednotlivé záznamy čárkou.
Pokud máte ve společnosti nakonfigurované proxy, můžete zadat proxy server, přes který se bude směrovat provoz ke cloudovým prostředkům zadaným v nastaveních podnikových cloudových prostředků.
Pokud potřebujete zadat více hodnot, oddělte jednotlivé záznamy středníkem.
Zadejte názvy DNS, které utváří vaši firemní síť. Spolu se zadanými rozsahy IP adres definují ohraničení firemní sítě. Pokud potřebujete zadat více hodnot, oddělte jednotlivé záznamy čárkou.
Toto nastavení vyžaduje, aby byla povolená služba Windows Information Protection.
Příklad: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Zadejte názvy DNS, které tvoří vaši firemní síť. Pomocí nich a rozsahů IP adres, které zadáte, se definují hranice vaší firemní sítě. Pokud potřebujete zadat více hodnot, oddělte jednotlivé položky znakem |.
Toto nastavení se vyžaduje, aby se mohla povolit funkce Windows Information Protection.
Příklad: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
Pokud máte v podnikové síti externí proxy servery, zadejte je sem. Když zadáváte adresu proxy serveru, měli byste zadat také port, přes který bude probíhat přenos a ochrana prostřednictvím Windows Information Protection.
Poznámka: Tento seznam nesmí zahrnovat servery uvedené v seznamu podnikových interních proxy serverů. Pokud potřebujete zadat více hodnot, oddělte jednotlivé záznamy středníkem.
",
+ "maxInactivityTime1": "Určuje maximální dobu (v minutách), po kterou může zařízení zůstat neaktivní, než se zamkne PIN kódem nebo heslem. Uživatelé si můžou vybrat jakoukoli hodnotu vypršení časového limit menší než maximální doba zadaná v aplikaci Nastavení. Poznámka: Lumia 950 a 950XL mají maximální hodnotu časového limitu 5 minut bez ohledu na hodnotu, kterou určují tyto zásady.",
+ "maxInactivityTime2": "0 (výchozí) – Není definovaný žádný časový limit. Výchozí hodnota 0 se interpretuje tak, že není definovaný žádný časový limit.",
+ "maxPasswordAttempts1": "Tyto zásady se chovají jinak na mobilním a jinak na desktopovém zařízení.",
+ "maxPasswordAttempts2": "Když uživatel dosáhne hodnoty nastavené v těchto zásadách na mobilním zařízení, zařízení se vymaže.",
+ "maxPasswordAttempts3": "Když uživatel dosáhne hodnoty nastavené v těchto zásadách na stolním počítači, počítač se nevymaže. Místo toho se počítač převede do režimu obnovení BitLockeru, který sice znepřístupní data, ale je možné je obnovit. Pokud se nezapne BitLocker, zásady se nedají vynutit.",
+ "maxPasswordAttempts4": "Než uživatel dosáhne limitu neúspěšných pokusů, pošle se mu na zamykací obrazovku upozornění, že další neúspěšné pokusy uzamknou jeho počítač. Jakmile uživatel limitu dosáhne, zařízení se automaticky restartuje a zobrazí stránku obnovení BitLockeru. Tato stránka uživatele vyzve k zadání obnovovacího klíče BitLockeru.",
+ "maxPasswordAttempts5": "0 (výchozí) – Zařízení se po zadání nesprávného PIN kódu nebo hesla nikdy nevymaže.",
+ "maxPasswordAttempts6": "Pokud jsou všechny hodnoty zásad = 0, je nejbezpečnější hodnotou 0. Jinak je nejbezpečnější hodnotou zásad Min.",
+ "mdmDiscoveryUrl": "Zadejte adresu URL pro koncový bod registrace MDM, který budou používat uživatelé registrující se do MDM. Tato hodnota se standardně zadává pro Intune.",
+ "minimumPinLength1": "Celočíselná hodnota, která nastavuje minimální počet znaků vyžadovaných pro PIN kód. Výchozí hodnota je 4. Nejnižší počet, který pro toto nastavení zásad můžete nakonfigurovat, je 4. Největší hodnota, kterou můžete nakonfigurovat, musí být menší než 127 nebo číslo nakonfigurované v nastavení zásady Maximální délka PIN kódu, podle toho, co je menší.",
+ "minimumPinLength2": "Pokud nakonfigurujete toto nastavení zásad, délka PIN kódu musí být větší nebo rovna tomuto číslu. Pokud toto nastavení zásad zakážete nebo nenakonfigurujete, délka PIN kódu musí být větší nebo rovna 4.",
+ "name": "Název tohoto ohraničení sítě",
+ "neutralResources": "
Pokud máte ve společnosti koncové body pro přesměrování ověřování, zadejte je sem. Umístění, která se tady zadají, se považují buď za osobní, nebo za podniková. Záleží to na kontextu připojení před přesměrováním.
Pokud potřebujete zadat více hodnot, oddělte jednotlivé záznamy čárkou.
Příklad: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Hodnota, která nastavuje Windows Hello pro firmy jako metodu přihlašování do Windows",
+ "passportForWork2": "Výchozí hodnota je true. Pokud tyto zásady nastavíte na false, uživatel nemůže zřídit Windows Hello pro firmy. Výjimkou jsou mobilní telefony připojené k Microsoft Entra, u kterých je zřízení povinné.",
+ "pinExpiration": "Největší hodnota, kterou můžete pro toto nastavení zásad nastavit, je 730. Nejmenší hodnota, kterou můžete pro toto nastavení zásad nastavit, je 0. Pokud tyto zásady nastavíte na 0, platnost PIN kódu uživatele nikdy nevyprší.",
+ "pinHistory1": "Největší hodnota, kterou můžete pro toto nastavení zásad nastavit, je 50. Nejmenší hodnota, kterou můžete pro toto nastavení zásad nastavit, je 0. Pokud tyto zásady nastavíte na 0, ukládání předchozích PIN kódů se nebude vyžadovat.",
+ "pinHistory2": "Aktuální PIN kód uživatele je součástí sady PIN kódů přidružených k uživatelskému účtu. Když se PIN kód resetuje, historie PIN kódů se nezachová.",
+ "protectUnderLock": "Chrání obsah aplikací, když je zařízení zamknuté.",
+ "protectionModeBlock": "
Zablokovat: Znemožňuje, aby podniková data opustila chráněné aplikace.
",
+ "protectionModeOff": "
Vypnuto: Uživatel může přemístit data mimo chráněné aplikace. Neprotokolují se žádné akce.
",
+ "protectionModeOverride": "
Povolit potlačení: Když se uživatel pokusí přemístit data z chráněné do nechráněné aplikace, zobrazí se mu dotaz. Pokud se rozhodne tento dotaz potlačit, akce se zaznamená do protokolu.
",
+ "protectionModeSilent": "
Tiché: Uživatelé můžou přemístit data mimo chráněné aplikace. Tyto akce se protokolují.
",
+ "required": "Požadováno",
+ "revokeOnMdmHandoff": "Přidáno ve Windows 10, verze 1703. Tato zásada řídí, jestli se mají odvolat klíče ochrany WIP při upgradu zařízení z MAM na MDM. Pokud je nastavená na Vypnuto, klíče se neodvolají a uživatel bude mít po upgradu dál přístup k chráněným souborům. Takové nastavení se doporučuje, když je služba MDM nakonfigurovaná se stejným EnterpriseID ochrany WIP jako služba MAM.",
+ "revokeOnUnenroll": "Tato možnost způsobí odvolání šifrovacích klíčů, když zařízení zruší svoji registraci k těmto zásadám.",
+ "rmsTemplateForEdp": "Identifikátor TemplateID GUID, který se použije k šifrování RMS. Šablona Azure RMS umožňuje správci IT konfigurovat podrobnosti o tom, kdo a jak dlouho má přístup k souboru chráněnému pomocí RMS.",
+ "showWipIcon": "Tato možnost dá uživateli pomocí překryvné ikony vědět, že jedná v kontextu podniku.",
+ "useRmsForWip": "Určuje, jestli se má pro WIP povolit šifrování Azure RMS."
+ },
+ "requireAppPin": "
Pokud chcete zakázat PIN kód aplikace, když se na zaregistrovaném zařízení zjistí zámek, vyberte Ano.
Poznámka: Na iOS/iPadOS nemůže Intune zjišťovat registraci zařízení pomocí řešení EMM třetí strany.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Vytvořit vlastní skript",
+ "edit": "Upravit vlastní skript"
+ },
+ "basicInfo": "Vytvořte nový vlastní balíček skriptu ze skriptů detekce a nápravy, které jste napsali.",
+ "customScriptCapitalized": "Vlastní skript",
+ "customScriptLowercase": "vlastní skript",
+ "detectionScript": "Skript detekce"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Výchozí",
+ "header": "Priorita aktualizace",
+ "postponed": "Odloženo",
+ "priority": "Vysoká priorita"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Automatická aktualizace",
+ "sublabel": "Pokud uživatel nainstaloval nahrazené aplikace z Portálu společnosti, musí se nainstalovat nahrazující aplikace."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Pozadí",
+ "displayText": "Stahování obsahu v {0}",
+ "foreground": "Popředí",
+ "header": "Priorita optimalizace doručení"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Umožnit uživateli odložit oznámení o restartování",
+ "countdownDialog": "Vyberte, jak dlouho před restartováním se má zobrazit dialogové okno odpočtu do restartování (minuty).",
+ "durationInMinutes": "Období odkladu restartování zařízení (minuty)",
+ "snoozeDurationInMinutes": "Vyberte délku odkladu (minuty)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Časové pásmo",
+ "local": "Časové pásmo zařízení",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Datum a čas",
+ "deadlineTimeColumnLabel": "Konečný termín instalace",
+ "deadlineTimeDatePickerErrorMessage": "Vybrané datum musí nastat později než datum k dispozici",
+ "deadlineTimeLabel": "Konečný termín instalace aplikace",
+ "defaultTime": "Co nejdříve",
+ "infoText": "Pokud neurčíte čas dostupnosti níže, bude tato aplikace k dispozici ihned po nasazení. Pokud se jedná o požadovanou aplikaci, můžete zadat konečný termín instalace.",
+ "specificTime": "Určité datum a čas",
+ "startTimeColumnLabel": "Dostupnost",
+ "startTimeDatePickerErrorMessage": "Vybrané datum musí nastat před datem konečného termínu",
+ "startTimeLabel": "Dostupnost aplikace"
+ },
+ "restartGracePeriodHeader": "Období odkladu restartování",
+ "restartGracePeriodLabel": "Období odkladu restartování zařízení",
+ "summaryTitle": "Činnost koncového uživatele"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Přiřaďte vlastní atribut alespoň k jedné skupině. Pokud chcete upravit přiřazení, přejděte do Vlastností.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Skript prostředí",
"successfullySavedPolicy": "Uložené: {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64 bitů",
+ "thirtyTwoBit": "32 bitů"
+ },
+ "Countries": {
+ "ae": "Spojené arabské emiráty",
+ "ag": "Antigua a Barbuda",
+ "ai": "Anguilla",
+ "al": "Albánie",
+ "am": "Arménie",
+ "ao": "Angola",
+ "ar": "Argentina",
+ "at": "Rakousko",
+ "au": "Austrálie",
+ "az": "Ázerbájdžán",
+ "bb": "Barbados",
+ "be": "Belgie",
+ "bf": "Burkina Faso",
+ "bg": "Bulharsko",
+ "bh": "Bahrajn",
+ "bj": "Benin",
+ "bm": "Bermudy",
+ "bn": "Brunej",
+ "bo": "Bolívie",
+ "br": "Brazílie",
+ "bs": "Bahamy",
+ "bt": "Bhútán",
+ "bw": "Botswana",
+ "by": "Bělorusko",
+ "bz": "Belize",
+ "ca": "Kanada",
+ "cg": "Konžská republika",
+ "ch": "Švýcarsko",
+ "cl": "Chile",
+ "cn": "Čína",
+ "co": "Kolumbie",
+ "cr": "Kostarika",
+ "cv": "Cabo Verde",
+ "cy": "Kypr",
+ "cz": "Česká republika",
+ "de": "Německo",
+ "dk": "Dánsko",
+ "dm": "Dominika",
+ "do": "Dominikánská republika",
+ "dz": "Alžírsko",
+ "ec": "Ekvádor",
+ "ee": "Estonsko",
+ "eg": "Egypt",
+ "es": "Španělsko",
+ "fi": "Finsko",
+ "fj": "Fidži",
+ "fm": "Federativní státy Mikronésie",
+ "fr": "Francie",
+ "gb": "Spojené království",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambie",
+ "gr": "Řecko",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hongkong",
+ "hn": "Honduras",
+ "hr": "Chorvatsko",
+ "hu": "Maďarsko",
+ "id": "Indonésie",
+ "ie": "Irsko",
+ "il": "Izrael",
+ "in": "Indie",
+ "is": "Island",
+ "it": "Itálie",
+ "jm": "Jamajka",
+ "jo": "Jordánsko",
+ "jp": "Japonsko",
+ "ke": "Keňa",
+ "kg": "Kyrgyzstán",
+ "kh": "Kambodža",
+ "kn": "Svatý Kryštof a Nevis",
+ "kr": "Korejská republika",
+ "kw": "Kuvajt",
+ "ky": "Kajmanské ostrovy",
+ "kz": "Kazachstán",
+ "la": "Laoská lidově demokratická republika",
+ "lb": "Libanon",
+ "lc": "Svatá Lucie",
+ "lk": "Srí Lanka",
+ "lr": "Libérie",
+ "lt": "Litva",
+ "lu": "Lucembursko",
+ "lv": "Lotyšsko",
+ "md": "Moldavská republika",
+ "mg": "Madagaskar",
+ "mk": "Severní Makedonie",
+ "ml": "Mali",
+ "mn": "Mongolsko",
+ "mo": "Macao",
+ "mr": "Mauritánie",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauricius",
+ "mw": "Malawi",
+ "mx": "Mexiko",
+ "my": "Malajsie",
+ "mz": "Mosambik",
+ "na": "Namibie",
+ "ne": "Niger",
+ "ng": "Nigérie",
+ "ni": "Nikaragua",
+ "nl": "Nizozemsko",
+ "no": "Norsko",
+ "np": "Nepál",
+ "nz": "Nový Zéland",
+ "om": "Omán",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua-Nová Guinea",
+ "ph": "Filipíny",
+ "pk": "Pákistán",
+ "pl": "Polsko",
+ "pt": "Portugalsko",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Katar",
+ "ro": "Rumunsko",
+ "ru": "Rusko",
+ "sa": "Saúdská Arábie",
+ "sb": "Šalamounovy ostrovy",
+ "sc": "Seychely",
+ "se": "Švédsko",
+ "sg": "Singapur",
+ "si": "Slovinsko",
+ "sk": "Slovensko",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Surinam",
+ "st": "Svatý Tomáš a Princův ostrov",
+ "sv": "Salvador",
+ "sz": "Svazijsko",
+ "tc": "Turks a Caicos",
+ "td": "Čad",
+ "th": "Thajsko",
+ "tj": "Tádžikistán",
+ "tm": "Turkmenistán",
+ "tn": "Tunisko",
+ "tr": "Turecko",
+ "tt": "Trinidad a Tobago",
+ "tw": "Tchaj-wan",
+ "tz": "Tanzanie",
+ "ua": "Ukrajina",
+ "ug": "Uganda",
+ "us": "USA",
+ "uy": "Uruguay",
+ "uz": "Uzbekistán",
+ "vc": "Svatý Vincenc a Grenadiny",
+ "ve": "Venezuela",
+ "vg": "Britské Panenské ostrovy",
+ "vn": "Vietnam",
+ "ye": "Jemen",
+ "za": "Jihoafrická republika",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Toto nastavení se nedá konfigurovat přes OMA-URI, protože je k dispozici v katalogu nastavení. Pokud chcete nakonfigurovat toto nastavení, přejděte prosím do katalogu nastavení."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Vyberte soubor konfiguračního profilu"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Tato nastavení fungují pro zařízení, která se zaregistrovala do Intune prostřednictvím registrace zařízení nebo uživatelů, a pro zařízení zaregistrovaná pomocí automatizované registrace zařízení (dříve DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Registrace zařízení a automatizovaná registrace zařízení",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Registrace zařízení a automatizovaná registrace zařízení",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Nakonfigurujte na svých plně spravovaných zařízeních aplikaci Microsoft Launcher.",
+ "deviceExperienceTypeDescription": "Podle prostředí, které chcete nakonfigurovat, vyberte Beznabídkový režim nebo Microsoft Launcher a začněte konfigurovat prostředí na svých zařízeních. Jestliže typ prostředí zařízení nevyberete, uživatelé uvidí prostředí výchozí domovské obrazovky zařízení.",
+ "deviceExperienceTypeKioskMode": "Beznabídkový režim (vyhrazená a plně spravovaná zařízení)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Pomocí Microsoft Launcheru můžete přizpůsobit možnosti domovské obrazovky na spravovaných zařízeních vaší organizace. Pokud nastavíte Microsoft Launcher jako výchozí, uživatelé zařízení nebudou moct použít jiný spouštěcí program.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Nastavit Microsoft Launcher jako výchozí spouštěcí program ",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (jen plně spravovaná zařízení)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Uživatelé nebudou moct změnit tapetu, pokud jim to nepovolíte. Toto nastavení je k dispozici jenom v případě, že nakonfigurujete vlastní tapetu.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Povolit uživateli měnit tapetu",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Umožňuje použít jako tapetu domovské obrazovky vlastní obrázek a zvolit, jestli ho může uživatel změnit. Pokud nenastavíte vlastní tapetu, zařízení zachová svou aktuální tapetu.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Konfigurovat vlastní tapetu",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Tento obrázek se bude zobrazovat jako tapeta na domovské obrazovce zařízení. Toto pole je k dispozici pouze v případě, že nakonfigurujete vlastní tapetu.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Zadejte adresu URL obrázku tapety",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Zakázáno",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Skrýt",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Zobrazit",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Pokud dovolujete uživateli měnit přítomnost doku, bude předchozí nastavení vynuceno pro počáteční nasazení. Pro následná nasazení už nastavení vynucováno nebude, aby byly respektovány změny, které uživatel mohl provést. Toto nastavení je k dispozici jenom v případě, že nakonfigurujete přítomnost doku.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Povolit uživateli měnit přítomnost doku",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Dok je nabídka, která uživatelům zařízení umožňuje rychlý přístup k aplikacím a nástrojům. Pokud je skrytá, uživatelé ji musí otevřít potáhnutím prstem nahoru.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Přítomnost doku",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Pokud uživateli dovolujete povolit či zakázat spouštěcí podokno, bude předchozí nastavení vynuceno pro počáteční nasazení. Pro následná nasazení už nastavení vynucováno nebude, aby se respektovaly změny, které uživatel mohl provést. Toto nastavení je k dispozici jenom v případě, že povolíte spouštěcí podokno.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Povolit uživateli povolit/zakázat spouštěcí podokno",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Spouštěcí podokno je dodatečná obrazovka napravo od domovské obrazovky, odkud uživatelé zařízení mohou přistupovat ke svým kalendářům, dokumentům a posledním aktivitám. Pokud ho nepovolíte, zůstane zakázané. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Povolit spouštěcí podokno",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Umístění panelu hledání",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Dole",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Skrýt",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Nahoře",
+ "deviceExperienceTypeName": "Typ prostředí zařízení",
"deviceGuardCredentialGuardDescription": "Povolení se zámkem UEFI zajistí, že Credential Guard nepůjde vypnout na dálku. Povolení bez zámku UEFI umožní zakázat Credential Guard na dálku pomocí zásad skupiny.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "ID zařízení Intune",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Počet dní, než se z automatického restartování naplánovaného na dobu mimo aktivní používání přejde na restartování podle plánu, což vyžaduje, aby uživatel nastavil plán",
"engagedRestartTransitionScheduleName": "Převod uživatele na restartování podle plánu po automatickém restartování (dny)",
"enhancedOption": "Rozšířené (1903 a starší verze)",
- "enrollmentProfileTypeDedicatedDevice": "Vyhrazené zařízení",
- "enrollmentProfileTypeDescription": "Výběrem typu profilu registrace zahájíte konfiguraci Microsoft Launcheru nebo Microsoft Spravované domovské obrazovky. Pokud typ profilu nevyberete, uživatelům se zobrazí výchozí možnosti domovské obrazovky zařízení.",
- "enrollmentProfileTypeFullyManaged": "Plně spravované",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Nakonfigurujte na svých plně spravovaných zařízeních aplikaci Microsoft Launcher.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Pomocí Microsoft Launcheru můžete přizpůsobit možnosti domovské obrazovky na spravovaných zařízeních vaší organizace. Pokud nastavíte Microsoft Launcher jako výchozí, uživatelé zařízení nebudou moct použít jiný spouštěcí program.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Nastavit Microsoft Launcher jako výchozí spouštěcí program ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Povolit uživateli měnit tapetu",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Umožňuje použít jako tapetu domovské obrazovky vlastní obrázek a zvolit, jestli ho může uživatel změnit. Pokud nenastavíte vlastní tapetu, zařízení zachová svou aktuální tapetu.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Konfigurovat vlastní tapetu",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Tento obrázek se bude zobrazovat jako tapeta na domovské obrazovce zařízení. Toto pole je k dispozici pouze v případě, že nakonfigurujete vlastní tapetu.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Zadejte adresu URL obrázku tapety",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Zakázáno",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Skrýt",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Zobrazit",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Dok je nabídka, která uživatelům zařízení umožňuje rychlý přístup k aplikacím a nástrojům. Pokud je skrytá, uživatelé ji musí otevřít potáhnutím prstem nahoru.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Přítomnost doku",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Povolit uživateli povolit/zakázat spouštěcí podokno",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Spouštěcí podokno je dodatečná obrazovka napravo od domovské obrazovky, odkud uživatelé zařízení mohou přistupovat ke svým kalendářům, dokumentům a posledním aktivitám. Pokud ho nepovolíte, zůstane zakázané. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Povolit spouštěcí podokno",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Umístění panelu hledání",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Dole",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Skrýt",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Nahoře",
- "enrollmentProfileTypeName": "Typ registračního profilu",
"enrollmentSettingsHeading": "Nastavení registrace",
"enterOnlyOneForDns": "Zadejte seznam serverů DNS nebo proxy server.",
"enterpriseModeLoggingExample": "např. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Plně spravovaná, společností vlastněná zařízení s pracovním profilem",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Tato nastavení fungují jenom pro plně spravovaná a vyhrazená zařízení.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Plně spravovaná a vyhrazená zařízení",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Tato nastavení fungují jen pro plně spravovaná a vyhrazená zařízení, která se používají v souladu se zásadou veřejného terminálu.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Plně spravovaná a vyhrazená zařízení (jen beznabídkový režim)",
"gameCenterBlockedMacDescription": "Možnost Ano zakáže Game Center, jehož ikona se odebere z domovské obrazovky. K dispozici pro zařízení s verzemi macOSu 10.13 nebo novějšími.",
"gameCenterBlockedMacName": "Blokovat Game Center",
"gamingPageDescription": "Zablokuje přístup ke Hrám v aplikaci Nastavení.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Nakonfiguruje typ přihlášení pro přístup k aplikacím na tomto zařízení veřejného terminálu.",
"kioskShowTaskbarDesc": "Zobrazí nebo skryje na veřejném terminálu hlavní panel Windows.",
"kioskShowTaskbarName": "Hlavní panel Windows",
+ "kioskSingleInfoBoxText": "Beznabídkový režim s jednou aplikací: Zamkne dané zařízení, aby se mohla spustit vybraná aplikace. Pokud chcete tento režim použít, musíte nejdříve schválit a přiřadit vybranou aplikaci přes úlohu klientských aplikací. Na plně spravovaných zařízeních je jedinou vybranou aplikací, kterou je možné nastavit, Spravovaná domovská obrazovka. Všechny ostatní aplikace se pak budou spíše považovat za povinné.",
"kioskStartDateTime": "Počátek časového období údržby",
"kioskStartMenuLayoutXmlDesc": "Poskytněte rozložení XML, které definuje, v jakém pořadí se aplikace mají zobrazovat v nabídce Start.",
"kioskStartMenuLayoutXmlDescV2": "Když se importuje soubor XML, který konfiguruje rozložení nabídky Start, přepíše se stávající výběr pořadí zobrazení a velikosti dlaždice. Další informace",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Musí být platná cesta k souboru.",
"mustBeAValidHttpsUrl": "Musí jít o platnou adresu URL https.",
"mustBeAValidIPAddress": "Musí se jednat o platnou IP adresu (například 192.168.0.1 nebo 2001:0db8:85a3:0000:0000:8a2e:0370:7334).",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Hodnota musí být platná IP adresa nebo plně kvalifikovaný název domény s volitelným číslem portu.",
"mustBeAValidIPv4Address": "Musí se jednat o platnou adresu IPv4 (např. 192.168.0.1).",
"mustBeAValidIPv6Address": "Musí se jednat o platnou IPv6 adresu (například 2001:0db8:85a3:0000:0000:8a2e:0370:7334).",
"mustBeAValidImageUrl": "Musí být platná adresa URL obrázku, třeba www.contoso.com/image.jpg.",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Pravidla firewallu systému Windows z místního úložiště (veřejné sítě)",
"publicNetworkName": "Veřejná (nezjistitelná) síť",
"publicOutboundConnectionsSummaryLabel": "Výchozí akce pro odchozí připojení (Veřejné sítě)",
- "publicPlayStoreEnabledDescription": "Uživatelé získají přístup ke všem aplikacím kromě těch, které jste v Klientských aplikacích vyžadovali odinstalovat. Pokud pro toto nastavení zvolíte možnost Nenakonfigurováno, uživatelé budou moct přistupovat jen k aplikacím, které jste v Klientských aplikacích uvedli jako dostupné nebo požadované.",
+ "publicPlayStoreEnabledDescription": "Pokud vyberete „Povolit“, získají uživatelé přístup ke všem aplikacím s výjimkou těch, které jste v klientských aplikacích museli odinstalovat. Pokud pro toto nastavení zvolíte „Blokovat“ nebo „Nenakonfigurováno“, budou uživatelé moct přistupovat jenom k aplikacím, které jste uvedli jako dostupné nebo požadované v klientských aplikacích.",
"publicPlayStoreEnabledName": "Povolit přístup ke všem aplikacím v Obchodu Google Play",
- "publicPlayStoreEnabledWarning": "Pokud vyberete Povolit, uživatelé můžou instalovat libovolné aplikace z Obchodu Google Play. Pokud později výběr změníte na Nenakonfigurováno, všechny aplikace, které nejsou pro uživatele explicitně povolené, se ze zařízení odeberou.",
+ "publicPlayStoreEnabledWarning": "Pokud vyberete „Povolit“, budou uživatelé moct nainstalovat libovolné aplikace z Obchod Google Play. Pokud později změníte výběr na „Blokovat“ nebo „Nenakonfigurováno“, odeberou se ze zařízení všechny aplikace s výjimkou těch aplikací, které jste uvedli jako dostupné nebo požadované v klientských aplikacích.",
+ "publicPlayStoreSelectionAllowList": "Blokovat",
+ "publicPlayStoreSelectionBlockList": "Povolit",
+ "publicPlayStoreSelectionNotConfigured": "Nenakonfigurováno",
"publicShieldedSummaryLabel": "Chráněné (Veřejné sítě)",
"publicStealthModeSummaryLabel": "Neviditelný režim (Veřejné sítě)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Jednosměrové odpovědi na vícesměrová vysílání (Veřejné sítě)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Probíhá odstraňování...",
"photoLibrary": "Knihovna fotografií",
"pinCharSettingTooltip": "Číselný PIN kód povoluje jen číselné znaky.\r\n\r\nHeslo musí mít všechny tyto vlastnosti: alfanumerické znaky a povolené symboly",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Důležité: 1. června 2024 aplikace se sadou SDK starší než 17.7.0 už nebudou dostávat aktualizace zásad ochrany aplikací a uživatelům se zablokuje spuštění aplikace. Ujistěte se prosím, že uživatelé aktualizují své aplikace a vaše obchodní aplikace používají nedávnou sadu SDK nebo obálku. Další informace",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Platforma",
"platformDropDownLabel": "Platforma",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Zařízení",
"licenseTypeUser": "Uživatel"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Vlastnost",
- "rule": "Pravidlo",
- "ruleDetails": "Podrobnosti pravidla",
- "value": "Hodnota"
- },
- "assignIf": "Přiřadit profil, pokud",
- "deleteWarning": "Tato akce odstraní vybrané pravidlo použitelnosti.",
- "dontAssignIf": "Nepřiřazovat profil, pokud",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "a ještě {0}",
- "instructions": "Zadejte, jak se tento profil má použít v přiřazené skupině. Intune použije profil jen pro zařízení, která splňují kombinaci kritérií danou těmito pravidly.",
- "maxText": "Maximum",
- "minText": "Minimum",
- "noActionRow": "Nezadala se žádná pravidla použitelnosti.",
- "oSVersion": "např. 1.2.3.4",
- "toText": "do",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic pro firmy",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "Edice operačního systému",
- "windows10OsVersion": "Verze OS",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Je rovno",
- "greaterThan": "Větší než",
- "greaterThanOrEqualTo": "Větší než nebo rovno",
- "lessThan": "Menší než",
- "lessThanOrEqualTo": "Menší než nebo rovno",
- "notEqualTo": "Není rovno"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Vynutit kontrolu podpisu skriptu a tiše spustit skript",
- "enforceSignatureCheckTooltip": "Pokud chcete ověřit, že skript je podepsaný důvěryhodným vydavatelem, který umožní skriptu běžet bez toho, aby se zobrazovaly výzvy nebo upozornění, vyberte Ano. Skript se spustí neblokovaný. Pokud chcete skript spustit s potvrzením koncového uživatele bez ověření podpisu, vyberte Ne (výchozí).",
- "header": "Použít vlastní skript zjišťování",
- "runAs32Bit": "Na 64bitových klientech spouštět skript jako 32bitový proces",
- "runAs32BitTooltip": "Pokud chcete na 64bitových klientech spouštět skript jako 32bitový proces, vyberte Ano. Pokud ho na těchto klientech chcete spouštět jako 64bitový proces, vyberte Ne (výchozí). 32bitoví klienti budou skript spouštět jako 32bitový proces.",
- "scriptContent": "Obsah skriptu",
- "scriptFile": "Soubor skriptu",
- "scriptFileNotSelectedValidation": "Nevybral se žádný soubor skriptu.",
- "scriptFileTooltip": "Vyberte powershellový skript, který zjistí přítomnost aplikace v klientovi. Aplikace se bude považovat za zjištěnou, když skript vrátí ukončovací kód s hodnotou 0 a zapíše řetězcovou hodnotu na STDOUT.",
- "scriptSizeLimitValidation": "Váš skript detekce překračuje maximální povolenou velikost. Vyřešte to zmenšením velikost vašeho skriptu detekce."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Datum vytvoření",
- "dateModified": "Datum změny",
- "doesNotExist": "Soubor nebo složka neexistuje.",
- "fileOrFolderExists": "Soubor nebo složka existuje.",
- "sizeInMB": "Velikost v MB",
- "version": "Řetězec (verze)"
- },
- "associatedWith32Bit": "Přidruženo k 32bitové aplikaci na 64bitových klientech",
- "associatedWith32BitTooltip": "Pokud chcete na 64bitových klientech rozbalit proměnné prostředí cest v 32bitovém kontextu, vyberte Ano. Pokud chcete na těchto klientech rozbalit všechny proměnné cest v 64bitovém kontextu, vyberte Ne (výchozí). 32bitoví klienti budou vždy používat 32bitový kontext.",
- "detectionMethod": "Metoda zjišťování",
- "detectionMethodTooltip": "Vyberte typ metody zjišťování, která se používá k ověření přítomnosti aplikace",
- "fileOrFolder": "Soubor nebo složka",
- "fileOrFolderToolTip": "Soubor nebo složka, které se mají zjistit",
- "operator": "Operátor",
- "operatorTooltip": "Vyberte operátor, pomocí kterého metoda zjišťování ověří porovnání.",
- "path": "Cesta",
- "pathTooltip": "Úplná cesta složky, která obsahuje soubor nebo složku, které se mají zjistit",
- "value": "Hodnota",
- "valueTooltip": "Vyberte hodnotu, která odpovídá vybrané metodě zjišťování. Metody zjišťování na základě data by se měly zadat v místním čase."
- },
- "GridColumns": {
- "pathOrCode": "Cesta/kód",
- "type": "Typ"
- },
- "MsiRule": {
- "operator": "Operátor",
- "operatorTooltip": "Vyberte operátor pro porovnání ověření verze produktu Instalační služby MSI.",
- "productCode": "Kód produktu Instalační služby MSI",
- "productCodeTooltip": "Platný kód produktu Instalační služby MSI pro aplikaci",
- "productVersion": "Hodnota",
- "productVersionCheck": "Kontrola verze produktu Instalační služby MSI",
- "productVersionCheckTooltip": "Pokud chcete kromě kódu produktu Instalační služby MSI ověřit i verzi tohoto produktu, vyberte Ano.",
- "productVersionTooltip": "Zadejte verzi produktu Instalační služby MSI pro aplikaci."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Porovnání celých čísel",
- "keyDoesNotExist": "Klíč neexistuje.",
- "keyExists": "Klíč existuje.",
- "stringComparison": "Porovnání řetězců",
- "valueDoesNotExist": "Hodnota neexistuje.",
- "valueExists": "Hodnota existuje.",
- "versionComparison": "Porovnání verzí"
- },
- "associatedWith32Bit": "Přidruženo k 32bitové aplikaci na 64bitových klientech",
- "associatedWith32BitTooltip": "Pokud chcete na 64bitových klientech prohledávat 32bitový registr, vyberte Ano. Pokud na těchto klientech chcete prohledávat 64bitový registr, vyberte Ne (výchozí). 32bitoví klienti budou vždy prohledávat 32bitový registr.",
- "detectionMethod": "Metoda zjišťování",
- "detectionMethodTooltip": "Vyberte typ metody zjišťování, která se používá k ověření přítomnosti aplikace",
- "keyPath": "Cesta ke klíči",
- "keyPathTooltip": "Úplná cesta položky registru, která obsahuje hodnotu, která se má zjistit",
- "operator": "Operátor",
- "operatorTooltip": "Vyberte operátor, pomocí kterého metoda zjišťování ověří porovnání.",
- "value": "Hodnota",
- "valueName": "Název hodnoty",
- "valueNameTooltip": "Název hodnoty registru, která se má zjistit",
- "valueTooltip": "Vyberte hodnotu, která odpovídá vybrané metodě zjišťování."
- },
- "RuleTypeOptions": {
- "file": "Soubor",
- "mSI": "Instalační služba MSI",
- "registry": "Registr"
- },
- "gridAriaLabel": "Pravidla zjišťování",
- "header": "Vytvořte pravidlo, které indikuje přítomnost aplikace.",
- "noRulesSelectedPlaceholder": "Nezadala se žádná pravidla.",
- "ruleTableLimit": "Můžete přidat až 25 pravidel detekce",
- "ruleType": "Typ pravidla",
- "ruleTypeTooltip": "Zvolte typ pravidla zjišťování, které se má přidat."
- },
- "RuleConfigurationOptions": {
- "customScript": "Použít vlastní skript zjišťování",
- "manual": "Ručně nakonfigurovat pravidla zjišťování"
- },
- "bladeTitle": "Pravidla detekce",
- "header": "Nakonfigurovat pravidla pro konkrétní aplikaci, pomocí kterých se zjistí přítomnost aplikace",
- "rulesFormat": "Formát pravidel",
- "rulesFormatTooltip": "Zvolte buď ruční konfiguraci pravidel zjišťování, nebo použijte vlastní skript, který zjistí přítomnost aplikace.",
- "selectorLabel": "Pravidla detekce"
+ "BooleanActions": {
+ "allow": "Povolit",
+ "block": "Blokovat",
+ "configured": "Nakonfigurováno",
+ "disable": "Zakázat",
+ "dontRequire": "Nevyžadovat",
+ "enable": "Povolit",
+ "hide": "Skrýt",
+ "limit": "Limit",
+ "notConfigured": "Nenakonfigurováno",
+ "require": "Vyžadovat",
+ "show": "Zobrazit",
+ "yes": "Ano"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Doporučené nastavení filtru SmartScreen aplikace Microsoft Edge: Windows 10 v šabloně konfigurace cloudu. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Zjišťování koncových bodů a odpověď"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "Izolace aplikací a prohlížečů",
- "aSRApplicationControl": "Řízení aplikací",
- "aSRAttackSurfaceReduction": "Pravidla pro omezení možností útoku",
- "aSRDeviceControl": "Řízení zařízení",
- "aSRExploitProtection": "Ochrana Exploit Protection",
- "aSRWebProtection": "Webová ochrana (Microsoft Edge starší verze)",
- "aVExclusions": "Výjimky Antivirové ochrany v programu Microsoft Defender",
- "antivirus": "Antivirová ochrana v programu Microsoft Defender",
- "cloudPC": "Windows 365 – Standardní hodnoty zabezpečení",
- "default": "Zabezpečení koncového bodu",
- "defenderTest": "Ukázka programu Microsoft Defender pro koncový bod",
- "diskEncryption": "Nástroj BitLocker",
- "eDR": "Zjišťování koncových bodů a odpověď",
- "edgeSecurityBaseline": "Standardní hodnoty Microsoft Edge",
- "edgeSecurityBaselinePreview": "Preview: Standardní hodnoty Microsoft Edge",
- "editionUpgradeConfiguration": "Upgrade edice a přepnutí režimu",
- "firewall": "Brána firewall systému Windows",
- "firewallRules": "Pravidla firewallu systému Windows",
- "identityProtection": "Ochrana účtu",
- "identityProtectionPreview": "Ochrana účtu (Preview)",
- "mDMSecurityBaseline1810": "Základní úroveň zabezpečení MDM pro Windows 10 a novější pro říjen 2018",
- "mDMSecurityBaseline1810Preview": "Preview: Základní úroveň zabezpečení MDM pro Windows 10 a novější pro říjen 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Preview: Základní úroveň zabezpečení MDM pro Windows 10 pro říjen 2018 (beta verze)",
- "mDMSecurityBaseline1906": "Základní úroveň zabezpečení MDM pro Windows 10 a novější pro květen 2019",
- "mDMSecurityBaseline2004": "Základní úroveň zabezpečení MDM pro Windows 10 a novější pro srpen 2020",
- "mDMSecurityBaseline2101": "Základní úroveň zabezpečení MDM pro Windows 10 a novější, prosinec 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "Brána firewall macOS",
- "microsoftDefenderBaseline": "Standardní hodnoty pro Microsoft Defender pro koncový bod",
- "office365Baseline": "Standardní hodnoty Microsoft Office O365",
- "office365BaselinePreview": "Preview: Standardní hodnoty Microsoft Office O365",
- "securityBaselines": "Základní úrovně zabezpečení",
- "test": "Testovací šablona",
- "testFirewallRulesSecurityTemplateName": "Pravidla firewallu systému Windows (test)",
- "testIdentityProtectionSecurityTemplateName": "Ochrana účtu (test)",
- "windowsSecurityExperience": "Možnosti Zabezpečení Windows"
- },
- "Firewall": {
- "mDE": "Brána firewall systému Windows"
- },
- "FirewallRules": {
- "mDE": "Pravidla firewallu systému Windows"
- },
- "OneDriveKnownFolderMove": {
- "description": "Nastavení přesunutí známých složek na OneDrivu: Windows 10 v šabloně konfigurace cloudu. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Ochrana účtu",
- "administrativeTemplates": "Šablony pro správu",
- "androidCompliancePolicy": "Zásady dodržování předpisů v Androidu",
- "aospDeviceOwnerCompliancePolicy": "Zásady dodržování předpisů v Androidu (AOSP)",
- "applicationControl": "Řízení aplikací pro firmy",
- "attackSurfaceReductionRules": "Pravidla pro omezení možností útoku",
- "bitlocker": "Nástroj BitLocker",
- "custom": "Vlastní",
- "deliveryOptimization": "Optimalizace doručení",
- "derivedPersonalIdentityVerificationCredential": "Odvozené přihlašovací údaje",
- "deviceControl": "Řízení zařízení",
- "deviceFeatures": "Funkce zařízení",
- "deviceFirmwareConfigurationInterface": "Rozhraní DFCI (Device Firmware Configuration Interface)",
- "deviceLock": "Zámek zařízení",
- "deviceOwner": "Plně spravovaná, vyhrazená, vlastněná společností a s pracovním profilem",
- "deviceRestrictions": "Omezení zařízení",
- "deviceRestrictionsWindows10Team": "Omezení zařízení (Windows 10 Team)",
- "domainJoinPreview": "Připojení k doméně",
- "editionUpgradeAndModeSwitch": "Upgrade edice a přepnutí režimu",
- "education": "Vzdělávání",
- "email": "E-mail",
- "emailSamsungKnoxOnly": "E-mail (jen Samsung KNOX)",
- "endpointProtection": "Ochrana koncového bodu",
- "expeditedCheckin": "Konfigurace správy mobilních zařízení",
- "exploitProtection": "Ochrana Exploit Guard",
- "extensions": "Rozšíření",
- "hardwareConfigurations": "Konfigurace systému BIOS a další nastavení",
- "identityProtection": "Identity Protection",
- "iosCompliancePolicy": "Zásady dodržování předpisů v iOSu",
- "kiosk": "Veřejný terminál",
- "localUsersAndGroups": "Členství uživatelů ve skupinách",
- "macCompliancePolicy": "Zásady dodržování předpisů na Macu",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Standardní hodnoty zabezpečení Microsoft 365 Apps for Enterprise",
- "microsoftDefenderAntivirus": "Antivirová ochrana v programu Microsoft Defender",
- "microsoftDefenderAntivirusexclusions": "Výjimky Antivirové ochrany v programu Microsoft Defender",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktopová zařízení se systémem Windows 10 nebo novějším)",
- "microsoftDefenderFirewallRules": "Pravidla firewallu systému Windows",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Standardní hodnoty zabezpečení pro Microsoft Edge",
- "mxProfileZebraOnly": "Profil MX (pouze Zebra)",
- "networkBoundary": "Ohraničení sítě",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Přepsat zásady skupiny",
- "pkcsCertificate": "Certifikát PKCS",
- "pkcsImportedCertificate": "Importovaný certifikát PKCS",
- "preferenceFile": "Soubor preferencí",
- "presets": "Předvolby",
- "scepCertificate": "Certifikát SCEP",
- "secureAssessmentEducation": "Secure Assessment (Education)",
- "securityBaselineForHololens2Advanced": "Pokročilé standardní hodnoty zabezpečení pro HoloLens 2",
- "securityBaselineForHololens2Standard": "Standardní základní úroveň zabezpečení pro HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Standardní hodnoty zabezpečení pro Microsoft Edge",
- "settingsCatalog": "Katalog nastavení",
- "sharedMultiUserDevice": "Sdílené víceuživatelské zařízení",
- "softwareUpdates": "Aktualizace softwaru",
- "trustedCertificate": "Důvěryhodný certifikát",
- "unknown": "Neznámé",
- "unsupported": "Nepodporovaný",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Import Wi-Fi",
- "windows10CompliancePolicy": "Zásady dodržování předpisů ve Windows 10/11",
- "windows10MobileCompliancePolicy": "Zásady dodržování předpisů ve Windows 10 Mobile",
- "windows10XScep": "Certifikát SCEP – TEST",
- "windows10XTrustedCertificate": "Důvěryhodný certifikát – TEST",
- "windows10XVPN": "Síť VPN – TEST",
- "windows10XWifi": "WIFI – TEST",
- "windows11SecurityBaseline": "Základní úroveň zabezpečení pro Windows 10 a novější",
- "windows365SecurityBaseline": "Windows 365 – Standardní hodnoty zabezpečení",
- "windows8CompliancePolicy": "Zásady dodržování předpisů ve Windows 8",
- "windowsHealthMonitoring": "Monitorování stavu Windows",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Zásady dodržování předpisů ve Windows Phone",
- "windowsUpdateforBusiness": "Windows Update pro firmy",
- "wiredNetwork": "Drátová síť",
- "workProfile": "Pracovní profil v osobním vlastnictví"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Zpřístupnit aktualizaci postupně",
- "immediateStart": "Zpřístupnit aktualizaci co nejdříve",
- "startDateOnly": "Zpřístupnit aktualizaci k určitému datu"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Spravovaná zařízení",
- "devicesWithoutEnrollment": "Spravované aplikace"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filtr",
- "assignmentFilterTypeColumnHeader": "Režim filtru",
- "assignmentToast": "Oznámení koncovému uživateli",
- "assignmentTypeTableHeader": "TYP PŘIŘAZENÍ",
- "autoUpdate": "Automatická aktualizace",
- "deadlineTimeColumnLabel": "Konečný termín instalace",
- "deliveryOptimizationPriorityHeader": "Priorita optimalizace doručení",
- "groupTableHeader": "Skupina",
- "installContextLabel": "Kontext instalace",
- "isRemovable": "Nainstalovat jako vyměnitelné",
- "licenseTypeLabel": "Typ licence",
- "modeTableHeader": "Režim skupiny",
- "policySet": "Sada zásad",
- "preventAutoAppUpdate": "Zabránit automatickým aktualizacím aplikací",
- "preventManagedAppBackup": "Zabránit zálohování aplikace iCloud",
- "restartGracePeriodHeader": "Období odkladu restartování",
- "startTimeColumnLabel": "Dostupnost",
- "tracks": "Stopy",
- "uninstallOnRemoval": "Při odebrání zařízení odinstalovat",
- "updateMode": "Priorita aktualizace",
- "vPN": "Síť VPN"
- },
- "AppType": {
- "aADWebApp": "Webová aplikace AAD",
- "androidEnterpriseSystemApp": "Aplikace systému Android Enterprise",
- "androidForWorkApp": "Aplikace spravovaného obchodu Google Play",
- "androidLobApp": "Obchodní aplikace Android",
- "androidStoreApp": "Aplikace z obchodu pro Android",
- "builtInAndroid": "Integrovaná aplikace pro Android",
- "builtInApp": "Integrovaná aplikace",
- "builtInIos": "Integrovaná aplikace pro iOS",
- "iosIPadOSWebClip": "Webový klip pro iOS/iPadOS",
- "iosLobApp": "Obchodní aplikace iOS",
- "iosStoreApp": "Aplikace z obchodu pro iOS",
- "iosVppApp": "Aplikace iOS koupená přes Volume Purchase Program",
- "lineOfBusinessApp": "Obchodní aplikace",
- "macOSDmgApp": "Aplikace pro macOS (.DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Obchodní aplikace pro macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Sada Office pro macOS",
- "macOSPkgApp": "Aplikace pro macOS (PKG)",
- "macOSWebClip": "Webový klip pro macOS",
- "macOsVppApp": "Aplikace macOS koupená přes Volume Purchase Program",
- "managedAndroidLobApp": "Spravovaná obchodní aplikace Android",
- "managedAndroidStoreApp": "Spravovaná aplikace z obchodu pro Android",
- "managedGooglePlayApp": "Aplikace spravovaného obchodu Google Play",
- "managedGooglePlayPrivateApp": "Privátní aplikace spravovaného obchodu Google Play",
- "managedGooglePlayWebApp": "Webový odkaz spravovaného obchodu Google Play",
- "managedIosLobApp": "Spravovaná obchodní aplikace iOS",
- "managedIosStoreApp": "Spravovaná aplikace z obchodu pro iOS",
- "microsoftStoreForBusinessApp": "Aplikace pro Microsoft Store pro firmy",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store pro firmy",
- "officeAddIn": "Doplněk pro Office",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 a novější)",
- "sharePointApp": "Aplikace SharePoint",
- "teamsApp": "Aplikace Teams",
- "webApp": "Webový odkaz",
- "win32CatalogApp": "Katalogová aplikace Windows (Win32)",
- "winGetPublicApp": "Úložiště komunity Správce balíčků systému Windows",
- "winGetStoreApp": "Aplikace Microsoft Store (nová verze)",
- "windowsAppXLobApp": "Obchodní aplikace Windows AppX",
- "windowsClassicApp": "Aplikace pro Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 a novější)",
- "windowsMobileMsiLobApp": "Obchodní aplikace Windows MSI",
- "windowsPhone81AppXBundleLobApp": "Obchodní aplikace Windows Phone 8.1 AppX",
- "windowsPhone81AppXLobApp": "Obchodní aplikace Windows Phone 8.1 AppX",
- "windowsPhone81StoreApp": "Aplikace pro Windows Phone 8.1 Store",
- "windowsPhoneXapLobApp": "Obchodní aplikace Windows Phone XAP",
- "windowsStoreApp": "Aplikace Microsoft Store (starší verze)",
- "windowsUniversalAppXLobApp": "Obchodní aplikace Windows Universal AppX",
- "windowsUniversalLobApp": "Univerzální obchodní aplikace pro Windows",
- "windowsWebApp": "Webový odkaz Windows"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Vyloučené",
- "include": "Zahrnuté",
- "includeAllDevicesVirtualGroup": "Zahrnuté",
- "includeAllUsersVirtualGroup": "Zahrnuté"
- },
- "AssignmentToast": {
- "hideAll": "Skrýt všechny informační zprávy",
- "showAll": "Zobrazit všechny informační zprávy",
- "showReboot": "Zobrazit informační zprávy o restartování počítače"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Ano",
- "notConfigured": "Ne"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Pozadí",
- "displayText": "Stahování obsahu v {0}",
- "foreground": "Popředí",
- "header": "Priorita optimalizace doručení"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "Instalace aplikace může vynutit restartování zařízení",
- "basedOnReturnCode": "Určete chování na základě návratových kódů",
- "force": "Intune vynutí povinné restartování zařízení",
- "suppress": "Žádná konkrétní akce"
- },
- "FilterType": {
- "exclude": "Vyloučit",
- "include": "Zahrnout",
- "none": "Žádné"
- },
- "InstallIntent": {
- "available": "K dispozici zaregistrovaným zařízením",
- "availableWithoutEnrollment": "K dispozici s registrací i bez ní",
- "notApplicable": "Nelze použít",
- "required": "Povinné",
- "uninstall": "Odinstalovat"
- },
- "SettingType": {
- "assignmentType": "Typ přiřazení",
- "deviceLicensing": "Typ licence",
- "installContext": "Při odebrání zařízení odinstalovat",
- "toastSettings": "Oznámení koncovému uživateli",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Výchozí",
- "postponed": "Odloženo",
- "priority": "Vysoká priorita"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Nakonfigurujte zařízení pro počáteční zřízení.",
- "title": "Příprava zařízení"
- },
- "EnrollmentSettings": {
- "description": "Nakonfigurujte nastavení registrace, jako jsou blokování registrace a přiřazování k uživatelům.",
- "title": "Nastavení registrace"
- },
- "OSConfiguration": {
- "menuDescription": "Nakonfigurujte nastavení, pomocí kterých můžou uživatelé obnovit Windows ze spouštěcího USB flash disku.",
- "menuTitle": "Konfigurace obnovení operačního systému Windows"
- },
- "coManagementAuthorityDesc": "Konfigurovat nastavení spolusprávy pro integraci Configuration Manageru",
- "coManagementAuthorityTitle": "Nastavení spolusprávy ",
- "deploymentProfiles": "Profily nasazení Windows AutoPilot",
- "description": "Informace o sedmi různých způsobech, jak můžou uživatelé nebo správci registrovat osobní počítač s Windows 10/11 v Intune.",
- "descriptionLabel": "Metody registrace systému Windows",
- "enrollmentStatusPage": "Stránka stavu registrace"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Automaticky schvalovat všechny doporučené aktualizace ovladačů",
- "manual": "Ručně schvalovat a nasazovat aktualizace ovladačů"
- },
- "BulkActions": {
- "button": "Hromadné akce"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Metoda schválení:"
- },
- "DeploymentDeferralInDays": {
- "label": "Zpřístupnit aktualizace po",
- "units": "(d)",
- "value": "Počet dní: {0}"
- },
- "DriverAction": {
- "header": "Vyberte akci níže.",
- "label": "Akce ovladače",
- "placeholder": "Vyberte akci"
- },
- "IncludedDrivers": {
- "label": "Zahrnuté ovladače"
- },
- "SelectDrivers": {
- "header": "Vyberte ovladače, které chcete zahrnout do hromadné akce."
- },
- "SelectDriversToInclude": {
- "button": "Vybrat ovladače, které se mají zahrnout"
- },
- "SelectLessDrivers": {
- "validation": "Je možné vybrat maximálně sto ovladačů."
- },
- "SelectMoreDrivers": {
- "validation": "Měl by být vybrán alespoň jeden ovladač."
- },
- "SelectedDrivers": {
- "label": "Vybrané ovladače"
- },
- "availabilityDate": "Zpřístupnit v službě Windows Update",
- "bladeTitle": "Aktualizace ovladačů pro systém Windows 10 a novější (Preview)",
- "lastSync": "Poslední synchronizace:",
- "lastSyncDefaultText": "Čeká se na shromažďování počátečního inventáře.",
- "loadError": "Načítání selhalo."
- },
- "DriverStatus": {
- "approved": "Schváleno",
- "declined": "Odmítnuto",
- "export": "Exportování doporučených ovladačů",
- "needsReview": "Vyžaduje kontrolu",
- "paused": "Pozastaveno"
- },
- "DriversToReview": {
- "text": "{0} ke kontrole"
- },
- "Subtitle": {
- "automatic": "Zásady automatického schvalování aktualizace ovladačů",
- "manual": "Zásady ručního schvalování aktualizace ovladačů"
- },
- "SyncNotification": {
- "failure": "{0} nejde synchronizovat.",
- "failureDescription": "Došlo k chybě a požadovanou synchronizaci se nám nepovedlo dokončit. Zkuste to prosím znovu.",
- "pending": "Probíhá synchronizace {0}",
- "pendingDescription": "Načítáme nejnovější data. Tento proces může trvat několik minut.",
- "success": "Synchronizace {0} se dokončila.",
- "successDescription": "Synchronizace se službou WUfB byla dokončena v {0}"
- },
- "SyncSpinner": {
- "text": "Probíhá synchronizace. Může to trvat několik minut. Vyhledejte upozornění nebo se sem vraťte za pár minut."
- },
- "TabName": {
- "basics": "Základní informace",
- "driverUpdateSettings": "Nastavení",
- "otherDrivers": "Jiné ovladače",
- "properties": "Vlastnosti",
- "recommendedDrivers": "Doporučené ovladače"
- },
- "driverAddFilter": "Přidat filtr",
- "driverApplicableDevices": "Použitelná zařízení",
- "driverApprovalStatus": "Stav",
- "driverBulkActions": "Hromadné akce",
- "driverClass": "Třída ovladače",
- "driverCount": "Zobrazuje se {0} až {1} z celkového počtu {2} záznamů.",
- "driverFilterNoneSelected": "Nic není vybráno.",
- "driverManufacturer": "Výrobce",
- "driverName": "Název ovladače",
- "driverNameLower": "nasazení aktualizace ovladačů systému Windows",
- "driverNameUpper": "nasazení aktualizace ovladačů systému Windows",
- "driverRefresh": "Aktualizovat",
- "driverReleaseDate": "Datum uvedení na trh",
- "driverSearch": "Hledat",
- "driverSearchKeyword": "Zadejte klíčové slovo pro hledání.",
- "driverVersion": "Verze",
- "firstDeploymentDate": "První nasazení",
- "infoBoxText": "Po přiřazení a vytvoření zásad může vytvoření soupisu trvat až 24 hodin.",
- "textBlockText": "Vyberte nastavení pro schválení a nasazení zásad. Zvolte, jestli chcete nastavit zásady pro automatické nebo ruční schválení a nasazování aktualizací. Metodu schvalování nelze po vytvoření zásady změnit, ale podrobností týkajících se schvalování a nasazení jednotlivých ovladačů bude možné změnit po vytvoření soupisu pro přiřazená zařízení."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Pomocí těchto nastavení si udržíte přehled o uživatelích, kteří si instalují aplikace, které nebyly schválené pro použití ve vaší firmě. Vyberte typ seznamu aplikací s omezeným přístupem:
\r\n Zakázané aplikace – seznam aplikací, při jejichž instalaci ze strany uživatelů chcete dostat zprávu \r\n Schválené aplikace – seznam aplikací, které jsou schválené pro použití ve vaší firmě. Když si uživatelé nainstalují aplikaci, která není v tomto seznamu, dostanete zprávu. \r\n ",
- "androidZebraMxZebraMx": "Nakonfigurujte zařízení Zebra tak, že nahrajete profil MX ve formátu XML.",
- "iosDeviceFeaturesAirprint": "Pomocí těchto nastavení nakonfigurujete zařízení s iOS tak, aby se automaticky připojila ke kompatibilním tiskárnám AirPrint ve vaší síti. Budete potřebovat IP adresu a cestu k prostředku těchto tiskáren.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Nakonfigurujte rozšíření aplikace, které povoluje jednotné přihlašování (SSO) pro zařízení s iOS 13.0 nebo novějším.",
- "iosDeviceFeaturesHomeScreenLayout": "Nakonfigurujte rozložení dokovací a domovské obrazovky na zařízeních s iOS. Některá zařízení můžou mít omezený počet zobrazených položek.",
- "iosDeviceFeaturesIOSWallpaper": "Zobrazí obrázek, který se bude zobrazovat na domovské nebo zamykací obrazovce zařízení s iOS.\r\n Pokud chcete, aby se na každém místě zobrazil jedinečný obrázek, vytvořte jeden profil s obrázkem zamykací obrazovky a jeden s obrázkem domovské obrazovky.\r\n Pak oba profily přiřaďte uživatelům.\r\n \r\n
\r\n
Maximální velikost souboru: 750 kB
\r\n
Typ souboru: PNG, JPG nebo JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Zadejte nastavení oznámení pro aplikace. Podporuje iOS 9.3 a novější.",
- "iosDeviceFeaturesSharedDevice": "Zadejte nepovinný text, který se zobrazí na zamknuté obrazovce. Podporuje se v iOSu 9.3 a novějších. Další informace",
- "iosGeneralApplicationRestrictions": "Pomocí těchto nastavení si udržíte přehled o uživatelích, kteří si instalují aplikace, které nebyly schválené pro použití ve vaší firmě. Vyberte typ seznamu aplikací s omezeným přístupem:
\r\n Zakázané aplikace – seznam aplikací, při jejichž instalaci ze strany uživatelů chcete dostat zprávu \r\n Schválené aplikace – seznam aplikací, které jsou schválené pro použití ve vaší firmě. Když si uživatelé nainstalují aplikaci, která není v tomto seznamu, dostanete zprávu. \r\n ",
- "iosGeneralApplicationVisibility": "Pomocí seznamu zobrazených aplikací určete aplikace pro iOS, které může uživatel zobrazit nebo spustit. Pomocí seznamu skrytých aplikací určete aplikace pro iOS, které uživatel nemůže zobrazit ani spustit.",
- "iosGeneralAutonomousSingleAppMode": "Aplikace, které přidáte do tohoto seznamu a přiřadíte k zařízení, můžou zařízení uzamknout tak, aby na něm po spuštění běžela jenom tato aplikace. Zařízení se dá zamknout i v případě, že na něm poběží určitá akce (třeba testování). Jakmile se akce dokončí nebo pokud odeberete toto omezení, zařízení se vrátí do normálního stavu.",
- "iosGeneralKiosk": "Celoobrazovkový režim zamyká v zařízení různá nastavení nebo určuje jednu aplikaci, která na zařízení poběží. To může být užitečné v prostředích, jako je třeba obchod, kde chcete, aby na zařízení běžela jenom jedna ukázková aplikace.",
- "macDeviceFeaturesAirprint": "Pomocí těchto nastavení můžete nakonfigurovat zařízení s macOSem tak, aby se automaticky připojovala k tiskárnám kompatibilním s AirPrintem ve vaší síti. Vaše tiskárny budou potřebovat IP adresu a cestu k prostředku.",
- "macDeviceFeaturesAssociatedDomains": "Nakonfigurujte přidružené domény a můžete sdílet data a přihlašovací údaje mezi aplikacemi a weby organizace. Tento profil se dá použít u zařízení s operačním systémem macOS 10.15 nebo novějším.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Nakonfigurujte rozšíření aplikace, které povoluje jednotné přihlašování (SSO) pro zařízení s macOS 10.15 nebo novějším.",
- "macDeviceFeaturesLoginItems": "Zvolte, které aplikace, soubory nebo složky se otevřou, když se uživatel přihlásí ke svým zařízením. Pokud nechcete, aby uživatel měnil, jak se vybrané aplikace budou otevírat, můžete aplikaci skrýt z konfigurace uživatele.",
- "macDeviceFeaturesLoginWindow": "Nakonfigurujte zobrazování přihlašovací obrazovky macOS a funkcí, které jsou uživatelům k dispozici před a po přihlášení.",
- "macExtensionsKernelExtensions": "Pomocí těchto nastavení můžete nakonfigurovat zásady rozšíření jádra na zařízeních s macOSem ve verzi 10.13.2 a novějších.",
- "macGeneralDomains": "E-maily, které uživatel posílá nebo přijímá a které neodpovídají doménám zadaným tady, se označí jako nedůvěryhodné.",
- "windows10EndpointProtectionApplicationGuard": "Když budete používat Microsoft Edge, Ochrana Application Guard v programu Microsoft Defender ochrání vaše prostředí před weby, které vaše organizace nedefinovala jako důvěryhodné. Když uživatelé navštíví weby, které nejsou uvedené v ohraničení vaší izolované sítě, otevřou se tyto weby ve virtuální relaci procházení v Hyper-V. Důvěryhodné weby se definují prostřednictvím ohraničení sítě, které se dá konfigurovat v Konfiguraci zařízení. Poznámka: Tato funkce je k dispozici jen pro zařízení s 64bitovým systémem Windows 10 nebo novějším.",
- "windows10EndpointProtectionCredentialGuard": "Když se ochrana Credential Guard povolí, povolí se i tato povinná nastavení:\r\n \r\n
\r\n
Povolit zabezpečení na základě virtualizace: Povolí při příštím restartování zabezpečení na základě virtualizace (VBS). Zabezpečení na základě virtualizace nabízí podporu služeb zabezpečení pomocí hypervisoru Windows.
\r\n \r\n
Zabezpečené spouštění s přímým přístupem do paměti (DMA): Zapne VBS se zabezpečeným spouštěním a přímým přístupem do paměti (DMA).
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Zvolte další aplikace, které je potřeba auditovat pomocí Řízení aplikací v programu Microsoft Defender nebo které tento nástroj může považovat za důvěryhodné, aby bylo možné povolit jejich spuštění. Součásti systému Windows a všechny aplikace z obchodu Windows Store se za důvěryhodné považují automaticky.
\r\n Aplikace se nebudou blokovat, pokud se spustí v režimu Pouze audit. V tomto režimu se protokolují všechny události v protokolech místních klientů.\r\n ",
- "windows10GeneralPrivacyPerApp": "Přidejte aplikace, které by měly mít jiné chování ochrany osobních údajů než to, které jste definovali ve výchozích zásadách.",
- "windows10NetworkBoundaryNetworkBoundary": "Ohraničení sítě je seznam podnikových prostředků, třeba domén hostovaných v cloudu a rozsahů IP adres pro počítače umístěné v podnikové síti. Pokud chcete chránit data uložená v těchto umístěních pomocí zásad, definujte ohraničení sítě.",
- "windowsHealthMonitoring": "Nakonfigurujte zásady monitorování stavu Windows.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone může uživatelům znemožnit instalaci nebo spuštění aplikací uvedených v seznamu zakázaných nebo aplikací, které nejsou uvedené v seznamu schválených. Všechny spravované aplikace musí být přidané do seznamu schválených."
- },
- "Inputs": {
- "accountDomain": "Doména účtu",
- "accountDomainHint": "např. contosodomain",
- "accountDomainInfoBalloon": "Zadejte doménu účtu uživatele.",
- "accountTypeInfoBalloon": "Zadejte typ účtu, který se konfiguruje, podle modelu ověřování.",
- "allowContactSetting": "Povolit uživateli měnit nastavení kontaktů",
- "allowContactSyncInfoBalloon": "Určuje, jestli uživatel může měnit nastavení synchronizace kontaktů.",
- "allowUserChange": "Povolit uživateli měnit nastavení",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Zadejte prosím název balíčku podobný tomuto: com.microsoft.word",
- "androidUrlValidation": "Zadejte platnou adresu URL podobnou této: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "Kontext instalace aplikace",
- "appUrlLabel": "Adresa URL v obchodu s aplikacemi",
- "appleUrlValidation": "Zadejte platnou adresu URL podobnou této: https://www.itunes.apple.com/cz/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Použitelný typ zařízení",
- "assignmentActionLabel": "Režim",
- "authenticationMethodInfoBalloon": "Určuje metodu ověřování pro daného uživatele.",
- "authenticationMetod": "Metoda ověřování",
- "authenticationType": "Typ ověřování",
- "authenticationTypeInfoBalloon": "Zadat typ ověřování uživatele",
- "availableLicenseCount": "Dostupné licence",
- "basicAuth": "Základní ověřování",
- "biometricsInfoBalloon": "Aby uživatelé mohli přistupovat k aplikaci na svém zařízení, můžou se vyžadovat biometriky, třeba Touch ID nebo Face ID. Když se budou vyžadovat, použijí se jako doplněk metody ověřování vybrané v tomto profilu. Toto nastavení by se nemělo povolit, když jsou nasazené zásady ochrany aplikací Intune, protože zásady ochrany aplikací zahrnují požadavky na přístup, které se musí splnit před přístupem ke spravovaným datům. Když se povolí obě funkce, bude to mít za následek několik výzev pro přístup k Outlook Mobile. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Vypnuto. ",
- "bookNameLabel": "Název knihy",
- "bundleDescriptionHint": "Zadejte popis, který popisuje obsažené aplikace.",
- "calendar": "Kalendář",
- "categoryLabel": "Kategorie",
- "categoryNameLabel": "Výchozí název",
- "certProfileType": "Typ profilu certifikátu",
- "certificate": "Certifikát",
- "certificates": "Certifikáty",
- "commandLineLabel": "Argumenty příkazového řádku",
- "commandLineSizeHint": "Maximální délka textu argumentů příkazového řádku je 1024 znaků.",
- "configurationSettingsFormatLabel": "Formát nastavení konfigurace",
- "configurationSettingsLabel": "Formát nastavení",
- "contactSync": "Uložit kontakty",
- "contactSyncInfoBalloon": "Ukládání kontaktů do nativního adresáře mobilního zařízení umožňuje, aby se nové hovory a textové zprávy propojily s existujícími outlookovými kontakty uživatele. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Vypnuto.",
- "contacts": "Kontakty",
- "createdDateTime": "Vytvořeno",
- "defaultCategoryHint": "Výchozí kategorie se nedají změnit.",
- "deploySMimeCertsFromIntune": "Nasadit certifikáty S/MIME z Intune",
- "descriptionGenericLabel": "Popis",
- "descriptionHint": "Zadejte popis...",
- "descriptionLabel": "Popis",
- "descriptionSizeHint": "Popis by neměl být delší než 10 000 znaků.",
- "developerLabel": "Vývojář",
- "developerSizeHint": "Maximální délka jména vývojáře je 256 znaků.",
- "disable": "Vypnout",
- "disabled": "Zakázáno",
- "displayNameLabel": "Název",
- "displayVersionHint": "Zadat verzi aplikace",
- "displayVersionLabel": "Verze aplikace",
- "displayVersionLengthCheck": "Verze zobrazení by měla být dlouhá maximálně 130 znaků.",
- "eBookCategoryNameLabel": "Výchozí název",
- "emailAccount": "Název e-mailového účtu",
- "emailAccountHint": "třeba podnikový e-mail",
- "emailAccountInfoBalloon": "Určuje zobrazovaný název pro e-mailový účet, který se bude zobrazovat uživatelům na zařízeních.",
- "emailAddressAttribute": "Atribut e-mailové adresy z Microsoft Entra ID",
- "emailAddressInfoBalloon": "Určuje e-mailovou adresu, která se použije k odesílání a přijímání pošty.",
- "emailServer": "E-mailový server",
- "emailServerHint": "např. mail.contoso.com",
- "emailServerInfoBalloon": "Určuje název hostitele Exchange Serveru.",
- "enable": "Povolit",
- "enableSMime": "Povolit S/MIME",
- "enabled": "Povoleno",
- "encryptAllEmails": "Šifrovat všechny e-maily",
- "encryptionCertificates": "Šifrovací certifikáty",
- "endUserNotifications": "Oznámení koncovým uživatelům",
- "enrollmentTypeLabel": "Typ registrace zařízení",
- "externalRecipients": "Tip pro e-mail Externí příjemci",
- "externalRecipientsInfoBalloon": "Tip pro e-mail Externí příjemci se zobrazí, když odesílatel přidá příjemce, který je externí, nebo distribuční skupinu, která externí příjemce obsahuje. Tento tip pro e-mail informuje odesílatele, že zpráva, kterou vytvářejí, opustí organizaci. Díky tomu můžou zvolit správné formulace slov, tón a obsah. K dispozici jen pro účty Exchange Online a místní účty, které používají hybridní moderní ověřování. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto.",
- "focusedInbox": "Prioritní doručená pošta",
- "focusedInboxInfoBalloon": "Prioritní doručená pošta rozděluje doručenou poštu do dvou karet – Prioritní a Jiné. Vaše nejdůležitější e-maily se nacházejí na kartě Prioritní, zatímco ty ostatní zůstávají stále snadno přístupné na kartě Jiné, kde nikterak nepřekážejí. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto. ",
- "fullScreenEnabledLabel": "Na celou obrazovku",
- "gmailNineAmountOfEmail": "Počet e-mailů k synchronizaci",
- "gmailNineAuthenticationMethodInfoBalloon": "Vyberte, jak chcete, aby se uživatelé ověřovali u e-mailového serveru. Nejbezpečnější a bezproblémové prostředí svým koncovým uživatelům poskytnete pomocí certifikátů. Ověřování pomocí certifikátů ještě není k dispozici, protože nejsou k dispozici profily certifikátů SCEP a PKCS pro zařízení vlastníků. ",
- "gmailNineCertificateUPNInfoBalloon": "Certifikát musí obsahovat hlavní název uživatele (UPN) jako alternativní název subjektu.",
- "gmailNineEmailAddressInfoBalloon": "Atribut, který Intune získá z Microsoft Entra ID pro dynamické generování e-mailové adresy, kterou bude profil používat, například MyName@contoso.com (UPN). Další informace o atributech Microsoft Entra pro e-mailové profily.",
- "gmailNineEmailServerInfoBalloon": "Umístění Exchange (URL) e-mailového serveru, ke kterému se zadaná aplikace připojuje, aby získala e-mail",
- "gmailNineEmailSynchronizeInfoBalloon": "Umožňuje řídit, kolik e-mailů klient bude synchronizovat.",
- "gmailNineSSLInfoBalloon": "Povolením protokolu SSL zabezpečíte veškerou komunikaci s e-mailovým serverem.",
- "gmailNineUsernameInfoBalloon": "Atribut, který Intune získá z Microsoft Entra ID pro dynamické generování uživatelského jména, které bude profil používat, například MyName@contoso.com (UPN) nebo MyName (uživatelské jméno). Další informace o atributech Microsoft Entra pro e-mailové profily.",
- "ignoreManifestScope": "Ignorovat obor manifestu",
- "ignoreVersionDetection": "Ignorovat verzi aplikace",
- "informationUrlLabel": "Adresa URL informací",
- "informationUrlSizeHint": "Maximální délka adresy URL informací je 1024 znaků.",
- "installAsManaged": "Instalovat jako spravované",
- "installationSourceLabel": "Typ aplikace",
- "installerTypeInfoBalloon": "Typ instalačního programu balíčku aplikace.",
- "installerTypeLabel": "Typ instalačního programu",
- "isFeatured": "Zobrazit na Portálu společnosti jako vybranou aplikaci",
- "isMAMEnabledToggleLabel": "Ano",
- "lastModifiedDateTime": "Čas poslední aktualizace",
- "ldapUrl": "URL protokolu LDAP",
- "licensingType": "Podporuje přiřazení kontextu zařízení.",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimální operační systém",
- "modernAuth": "Moderní ověřování",
- "nameHint": "Zadejte název",
- "nameLabel": "Název",
- "nameSizeHint": "Maximální délka názvu je 512 znaků.",
- "notConfigured": "Nenakonfigurováno",
- "notesLabel": "Poznámky",
- "notesSizeHint": "Maximální délka textu poznámek je 1024 znaků.",
- "notificationType": "Typ oznámení",
- "oneDay": "Jeden den",
- "oneMonth": "Jeden měsíc",
- "oneWeek": "Jeden týden",
- "outlookSMimeSettings": "Nastavení standardu S/MIME v Outlooku",
- "ownerLabel": "Vlastník",
- "ownerSizeHint": "Maximální délka jména vlastníka je 256 znaků.",
- "packageIdLabel": "Identifikátor balíčku",
- "packageNameLabel": "Název balíčku",
- "pivCredentialNotConfigured": "Nevybrali jste vystavitele odvozených přihlašovacích údajů pro vašeho tenanta. Než budete moct tyto zásady na zařízení úspěšně použít, bude nutné jednoho nakonfigurovat.",
- "platformLabel": "Platforma",
- "policyDescriptionLabel": "Popis",
- "policyNameLabel": "Název",
- "preComposedIconEnabled": "Předem vytvořeno",
- "primarySMTPAddress": "Primární adresa SMTP",
- "privacyUrlLabel": "Adresa URL informací o ochraně osobních údajů",
- "publisherHint": "Zadejte název vydavatele",
- "publisherLabel": "Vydavatel",
- "publisherSizeHint": "Název vydavatele by měl být dlouhý 2 až 1024 znaků (včetně).",
- "require": "Vyžadovat",
- "requireBiometrics": "Pro přístup k aplikaci vyžadovat biometriku",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "Vyžaduje se alespoň jedna značka oboru.",
- "searchAppLabel": "Vybrat aplikaci",
- "searchAppLinkText": "Hledat v App Storu",
- "searchWinGetPublicRepositoryLinkText": "Hledat v úložišti komunity Správce balíčků systému Windows",
- "searchWinGetStoreRepositoryLinkText": "Hledat v aplikaci Microsoft Store (nová verze)",
- "selectAAD": "Vyberte atribut Microsoft Entra.",
- "selectAppFileLabel": "Vybrat soubor",
- "selectAppFileLinkText": "Vybrat soubor balíčku aplikace",
- "selectAppFileToUpdateLabel": "Vybrat soubor k aktualizaci",
- "selectAuthMethod": "Vyberte metodu ověřování.",
- "selectAuthType": "Vybrat typ ověřování",
- "selectCatalogAppLabel": "Vybrat aplikaci",
- "selectCatalogAppLinkText": "Hledat v Katalogu podnikových aplikací",
- "selectCertificate": "Vyberte certifikát.",
- "signAllEmails": "Podepisovat všechny e-maily",
- "signingCertificates": "Podpisové certifikáty",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Popis sady",
- "suiteNameLabel": "Název sady",
- "targetApplicationBundleIdentifier": "Identifikátor sady cílové aplikace",
- "targetedPlatformsLabel": "Cílová platforma",
- "tasks": "Úlohy",
- "threeDays": "Tři dny",
- "totalLicenseCount": "Celkový počet licencí",
- "twoWeeks": "Dva týdny",
- "unifiedAssignmentsLabel": "Přiřadit k:",
- "unlimited": "Bez omezení",
- "urlHint": "Zadejte platnou adresu URL",
- "useManagedBrowserHint": "Jenom Android a iOS. Další informace",
- "useManagedBrowserLabel": "K otevření tohoto odkazu vyžadovat spravovaný prohlížeč",
- "userPrinicipalName": "Hlavní název uživatele",
- "username": "Uživatelské jméno",
- "usernameAttribute": "Atribut uživatelského jména z Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Určuje hlavní název uživatele (UPN) pro e-mailový profil, pomocí kterého se ověří účet.",
- "usernamePassword": "Uživatelské jméno a heslo",
- "webAppUrlHint": "Zadejte platnou adresu URL, která začíná na http:// nebo https://.",
- "webAppUrlLabel": "Adresa URL aplikace",
- "webAppUrlSizeHint": "Maximální délka adresy URL aplikace je 1024 znaků",
- "windowsUrlValidation": "Zadejte platnou adresu URL podobnou této: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "Zadaná data XML",
- "xmlFormatInvalid": "Formát zásad XML je neplatný.",
- "xmlTooLarge": "Velikost vstupu musí být menší než 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "{0} se nepovedlo odstranit.",
- "failureCa": "Nepodařilo se odstranit: {0}, protože na to odkazují zásady certifikační autority.",
- "modifying": "Odstraňuje se {0}.",
- "success": "Úspěšně jste odstranili: {0}."
- },
- "Notify": {
- "failure": "Aplikaci {0} se nepodařilo aktualizovat.",
- "modifying": "Upravuje se {0}.",
- "success": "Aplikace {0} se úspěšně aktualizovala."
- },
- "menuLabel": "Kontext ověřování"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Další informace o vyžadování metod ověřování, které plní zprostředkovatelé federace.",
- "certificate": "Ověřování certifikátem",
- "infoBubble": "Zadejte požadovanou metodu ověřování, kterou musí splnit poskytovatel federace, třeba ADFS.",
- "multifactor": "Vícefaktorové ověřování",
- "require": "Vyžadovat federovanou metodu ověřování (Preview)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Zásady trvalých relací prohlížečů fungují správně, jen když je vybraná možnost Všechny cloudové aplikace. Aktualizujte prosím svůj výběr cloudových aplikací."
- },
- "Option": {
- "always": "Vždy trvalá",
- "help": "Trvalá relace prohlížeče umožňuje uživateli zůstat přihlášený i poté, co zavře a znovu otevře okno prohlížeče. \n
\n
Toto nastavení funguje správně, když je vybraná možnost Všechny cloudové aplikace.
\n
Na nastavení životnosti tokenů nebo frekvence přihlašování to nemá vliv.
\n
Toto nastavení přepíše zásady Zobrazit možnost zachovat přihlášení v Brandingu společnosti.
\n
Možnost Nikdy není trvalá přepíše všechny trvalé deklarace identity jednotného přihlašování předané z federovaných ověřovacích služeb.
\n
Možnost Nikdy není trvalá znemožní jednotné přihlašování na mobilních zařízeních mezi aplikacemi a mezi aplikacemi a mobilním prohlížečem uživatele.
\n",
- "label": "Trvalá relace prohlížeče",
- "never": "Nikdy není trvalá"
- },
- "Warning": {
- "allApps": "Trvalá relace prohlížeče funguje správně, jen když je vybraná možnost Všechny cloudové aplikace. Změňte prosím svůj výběr cloudových aplikací. Pro další informace klikněte sem."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Hodiny nebo dny",
- "value": "Frekvence"
- },
- "Option": {
- "Day": {
- "plural": "{0} d.",
- "singular": "1 den"
- },
- "Hour": {
- "plural": "{0} hod.",
- "singular": "1 hodina"
- },
- "daysOption": "Dny",
- "everytime": "Pokaždé",
- "help": "Doba, než se uživateli při přístupu k nějakému prostředku znovu zobrazí výzva k přihlášení. Výchozí nastavení je 90denní posuvné okno, tj. uživateli se výzva k opětovnému ověření zobrazí při prvním pokusu o přístup k prostředku poté, co na počítači nebyl uživatel aktivní 90 dní nebo déle.",
- "hoursOption": "Hodin",
- "label": "Frekvence přihlašování",
- "placeholder": "Vybrat jednotky"
- }
- },
- "mainOption": "Upravit životnost relace",
- "mainOptionHelp": "Nakonfigurujte, jak často se uživatelům bude zobrazovat výzva a jestli se mají zachovávat relace prohlížečů. Aplikace, které nepodporují moderní ověřovací protokoly, možná nebudou tyto zásady dodržovat. V takových případech se prosím obraťte na vývojáře aplikace."
- },
- "SingleSelectorActive": {
- "failed": "Tato data se nedaří načíst.",
- "reattempt": "Načítají se data. Opakovaný pokus {0} z {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Zvolit role adresářů"
- },
- "Excluded": {
- "gridAria": "Seznam vyloučených uživatelů"
- },
- "Included": {
- "gridAria": "Seznam zahrnutých uživatelů"
- },
- "Validation": {
- "customRoleIncluded": "Role adresáře obsahují alespoň jednu vlastní roli.",
- "customRoleSelected": "Vybrala se alespoň jedna vlastní role.",
- "failed": "{0} se musí nakonfigurovat.",
- "roles": "Vyberte alespoň jednu roli.",
- "usersGroups": "Vyberte alespoň jednoho uživatele nebo skupinu."
- },
- "learnMore": "Řízení přístupu na základě toho, na koho se zásady budou vztahovat, jako jsou uživatelé a skupiny, identity úloh, role adresáře nebo externí hosté."
- },
- "advancedTabText": "Upřesnit",
- "allCloudAppsErrorBox": "Když se vybere oprávnění Požadovat změnu hesla, musí se vybrat i možnost Všechny cloudové aplikace.",
- "allCloudAppsReauth": "Pokud je vybrané řízení relace s Frekvencí přihlašování pokaždé a oprávnění Riziko přihlašování, musíte vybrat možnost Všechny cloudové aplikace.",
- "allCloudOrSpecificApps": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje výběr „všechny cloudové aplikace“ nebo specificky podporovaných aplikací.",
- "allDayCheckboxLabel": "Celý den",
- "allDevicePlatforms": "Libovolné zařízení",
- "allGuestUserInfoContent": "Zahrnuje hosty Microsoft Entra B2B, ale ne hosty SharePoint B2B.",
- "allGuestUserLabel": "Všichni hosté a externí uživatelé",
- "allRiskLevelsOption": "Všechny úrovně rizika",
- "allTrustedLocationLabel": "Všechna důvěryhodná umístění",
- "allUserGroupSetSelectorLabel": "Vybrali se všichni uživatelé a skupiny",
- "allUsersReauth": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje výběr „Všichni uživatelé“.",
- "allUsersString": "Všichni uživatelé",
- "and": "{0} A {1} ",
- "andWithGrouping": "({0}) A {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Jakákoli cloudová aplikace",
- "appContextOptionInfoContent": "Požadovaná ověřovací značka",
- "appContextOptionLabel": "Požadovaná ověřovací značka (Preview)",
- "appContextUriPlaceholder": "Příklad: uri:contoso.com:level3",
- "appEnforceInfoBubble": "Omezení vynucená aplikací můžou vyžadovat další konfiguraci v cloudových aplikacích. Omezení budou platit jenom pro nové relace.",
- "appNotSetSeletorLabel": "0 vybraných aplikací",
- "appReauthNotSupported": "Tato aplikace nepodporuje řízení relace frekvence přihlašování pokaždé.",
- "applyConditionClientAppInfoBalloonContent": "Konfigurace klientských aplikací tak, aby se dané zásady používaly pro konkrétní klientské aplikace",
- "applyConditionDevicePlatformInfoBalloonContent": "Konfigurace platforem zařízení tak, aby se dané zásady používaly pro konkrétní platformy",
- "applyConditionDeviceStateInfoBalloonContent": "Konfigurace stavu zařízení tak, aby se dané zásady používaly pro konkrétní stavy zařízení",
- "applyConditionLocationInfoBalloonContent": "Konfigurace lokalit tak, aby se dané zásady používaly pro důvěryhodné nebo nedůvěryhodné lokality",
- "applyConditionSigninRiskInfoBalloonContent": "Konfigurace rizika přihlašování tak, aby se dané zásady používaly pro vybrané úrovně rizika",
- "applyConditionUserRiskInfoBalloonContent": "Konfigurace rizika uživatele tak, aby se dané zásady používaly pro vybrané úrovně rizika",
- "applyConditonLabel": "Konfigurovat",
- "ariaLabelPolicyDisabled": "Zásada je zakázána.",
- "ariaLabelPolicyEnabled": "Zásady jsou povolené",
- "ariaLabelPolicyReportOnly": "Zásady jsou v režimu pouze sestav.",
- "blockAccess": "Blokovat přístup",
- "builtInDirectoryRoleLabel": "Integrované role adresáře",
- "casCustomControlInfo": "Vlastní zásady se musí nakonfigurovat na portálu Cloud App Security. Pro doporučované aplikace tento ovládací prvek funguje okamžitě a je možné pro něj provést automatický onboarding do libovolné aplikace. Pro další informace o obou scénářích klikněte sem.",
- "casInfoBubble": "Tento ovládací prvek funguje v různých cloudových aplikacích.",
- "casPreconfiguredControlInfo": "Pro doporučované aplikace tento ovládací prvek funguje okamžitě a je možné pro něj provést automatický onboarding do libovolné aplikace. Pro další informace o obou scénářích klikněte sem.",
- "cert64DownloadCol": "Stáhnout certifikát base64",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Stáhnout certifikát",
- "certDurationCol": "Vypršení platnosti",
- "certDurationStartCol": "Platné od",
- "certName": "VpnCert",
- "certainApps": "Pro frekvenci přihlašování typu pokaždé se podporují jenom některé aplikace, pokud nevyberete oprávnění Vyžadovat vícefaktorové ověřování a Vyžadovat změnu hesla.",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Volba aplikací",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Zvolené aplikace",
- "chooseApplicationsEmpty": "Žádné aplikace",
- "chooseApplicationsNone": "Žádný",
- "chooseApplicationsNoneFound": "{0} se nám nepovedlo najít. Zkuste jiný název nebo ID.",
- "chooseApplicationsPlural": "{0}, počet dalších: {1}",
- "chooseApplicationsReAuthEverytimeInfo": "Hledáte svou aplikaci? Některé aplikace se nedají použít s řízením relace Vyžadovat opakované ověření – pokaždé.",
- "chooseApplicationsRemove": "Odebrat",
- "chooseApplicationsReturnedPlural": "Našel se tento počet aplikací: {0}",
- "chooseApplicationsReturnedSingular": "Našla se 1 aplikace.",
- "chooseApplicationsSearchBalloon": "Vyhledejte aplikaci tak, že zadáte její název nebo ID.",
- "chooseApplicationsSearchHint": "Hledat aplikace...",
- "chooseApplicationsSearchLabel": "Aplikace",
- "chooseApplicationsSearching": "Vyhledávání...",
- "chooseApplicationsSelect": "Vybrat",
- "chooseApplicationsSelected": "Vybrané",
- "chooseApplicationsSingular": "{0} a 1 další",
- "chooseApplicationsTooMany": "Více výsledků, než se dá zobrazit. Pomocí vyhledávacího pole prosím nastavte filtr.",
- "chooseLocationCorpnetItem": "Podniková síť",
- "chooseLocationSelectedLocationsLabel": "Vybraná umístění",
- "chooseLocationTrustedIpsItem": "Důvěryhodné IP adresy vícefaktorového ověřování",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Zvolte umístění",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Zvolená umístění",
- "chooseLocationsEmpty": "Žádná umístění",
- "chooseLocationsExcludedSelectorTitle": "Vybrat",
- "chooseLocationsIncludedSelectorTitle": "Vybrat",
- "chooseLocationsNone": "Žádný",
- "chooseLocationsNoneFound": "{0} se nám nepovedlo najít. Zkuste jiný název nebo ID.",
- "chooseLocationsPlural": "{0}, počet dalších: {1}",
- "chooseLocationsRemove": "Odebrat",
- "chooseLocationsReturnedPlural": "Počet nalezených umístění: {0}",
- "chooseLocationsReturnedSingular": "Počet nalezených umístění: 1",
- "chooseLocationsSearchBalloon": "Vyhledejte umístění tak, že zadáte jeho název.",
- "chooseLocationsSearchHint": "Hledat v umístěních...",
- "chooseLocationsSearchLabel": "Umístění",
- "chooseLocationsSearching": "Vyhledávání...",
- "chooseLocationsSelect": "Vybrat",
- "chooseLocationsSelected": "Vybrané",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Vybrat",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Vybrat",
- "chooseLocationsSingular": "{0} a 1 další",
- "chooseLocationsTooMany": "Více výsledků, než se dá zobrazit. Pomocí vyhledávacího pole prosím nastavte filtr.",
- "claimProviderAddCommandText": "Nový vlastní ovládací prvek",
- "claimProviderAddNewBladeTitle": "Nový vlastní ovládací prvek",
- "claimProviderDeleteCommand": "Odstranit",
- "claimProviderDeleteDescription": "Opravdu chcete odstranit síť {0}? Tato akce je nevratná.",
- "claimProviderDeleteTitle": "Jste si jistí?",
- "claimProviderEditInfoText": "Zadejte JSON pro přizpůsobený ovládací prvek předaný poskytovatelem deklarací identit.",
- "claimProviderNotificationCreateDescription": "Vytváří se vlastní ovládací prvek s názvem {0}.",
- "claimProviderNotificationCreateFailedDescription": "Nepovedlo se vytvořit vlastní ovládací prvek {0}. Zkuste to prosím znovu později.",
- "claimProviderNotificationCreateFailedTitle": "Nepovedlo se vytvořit vlastní ovládací prvek",
- "claimProviderNotificationCreateSuccessDescription": "Vytvořil se vlastní ovládací prvek s názvem {0}.",
- "claimProviderNotificationCreateSuccessTitle": "Vytvořila se síť {0}",
- "claimProviderNotificationCreateTitle": "Vytváří se {0}",
- "claimProviderNotificationDeleteDescription": "Odstraňuje se vlastní ovládací prvek s názvem {0}.",
- "claimProviderNotificationDeleteFailedDescription": "Nepovedlo se odstranit vlastní ovládací prvek {0}. Zkuste to prosím znovu později.",
- "claimProviderNotificationDeleteFailedTitle": "Nepovedlo se odstranit vlastní ovládací prvek",
- "claimProviderNotificationDeleteSuccessDescription": "Odstranil se vlastní ovládací prvek s názvem {0}.",
- "claimProviderNotificationDeleteSuccessTitle": "Odstranila se síť {0}",
- "claimProviderNotificationDeleteTitle": "Odstraňuje se {0}.",
- "claimProviderNotificationUpdateDescription": "Aktualizuje se vlastní ovládací prvek s názvem {0}.",
- "claimProviderNotificationUpdateFailedDescription": "Nepovedlo se aktualizovat vlastní ovládací prvek {0}. Zkuste to prosím znovu později.",
- "claimProviderNotificationUpdateFailedTitle": "Nepovedlo se aktualizovat vlastní ovládací prvek",
- "claimProviderNotificationUpdateSuccessDescription": "Aktualizoval se vlastní ovládací prvek s názvem {0}.",
- "claimProviderNotificationUpdateSuccessTitle": "Aktualizovala se síť {0}",
- "claimProviderNotificationUpdateTitle": "Aktualizuje se {0}",
- "claimProviderValidationAppIdInvalid": "Hodnota AppId není platná. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationClientIdMissing": "V datech chybí hodnota ClientId. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationControlClaimsRequestedMissing": "V Control chybí hodnota ClaimsRequested. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "V položce ClaimsRequested chybí hodnota Type. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationControlIdAlreadyExists": "Hodnota Id pro Control už existuje. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationControlIdMissing": "V Control chybí hodnota Id. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "Hodnotu Id pro Control nejde odebrat, protože se na ni odkazují existující zásady. Nejdříve ji prosím odeberte z těchto zásad.",
- "claimProviderValidationControlIdTooManyControls": "Vlastnost Control má příliš mnoho ovládacích prvků. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationControlIdValueReserved": "Hodnota Id pro Control je vyhrazené klíčové slovo, použijte prosím jiné ID.",
- "claimProviderValidationControlNameAlreadyExists": "Hodnota Name pro Control už existuje. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationControlNameMissing": "V Control chybí hodnota Name. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationControlsMissing": "V datech chybí hodnota Controls. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationDiscoveryUrlMissing": "V datech chybí hodnota DiscoveryUrl. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationInvalid": "Poskytnutá data nejsou platná. Zkontrolujte je prosím a zkuste to znovu.",
- "claimProviderValidationInvalidJsonDefinition": "Vlastní ovládací prvek se nepovedlo uložit. Zkontrolujte text JSON a zkuste to znovu.",
- "claimProviderValidationNameAlreadyExists": "Hodnota Name už existuje. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationNameMissing": "V datech chybí hodnota Name. Zkontrolujte ji prosím a zkuste to znovu.",
- "claimProviderValidationUnknown": "Při ověřování poskytnutých dat došlo k neznámé chybě. Zkontrolujte je prosím a zkuste to znovu.",
- "claimProvidersNone": "Žádné vlastní ovládací prvky",
- "claimProvidersSearchPlaceholder": "Hledat ovládací prvky",
- "classicPoilcyFilterTitle": "Zobrazit",
- "classicPolicyAllPlatforms": "Všechny platformy",
- "classicPolicyClientAppBrowserAndNative": "Prohlížeč, mobilní aplikace a desktopoví klienti",
- "classicPolicyCloudAppTitle": "Cloudová aplikace",
- "classicPolicyControlAllow": "Povolit",
- "classicPolicyControlBlock": "Blokovat",
- "classicPolicyControlBlockWhenNotAtWork": "Zablokovat přístup mimo práci",
- "classicPolicyControlRequireCompliantDevice": "Vyžaduje zařízení, které splňuje požadavky.",
- "classicPolicyControlRequireDomainJoinedDevice": "Vyžaduje zařízení připojené k doméně.",
- "classicPolicyControlRequireMfa": "Vyžadovat vícefaktorové ověřování",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Mimo práci vyžadovat vícefaktorové ověřování",
- "classicPolicyDeleteCommand": "Odstranit",
- "classicPolicyDeleteFailTitle": "Nepovedlo se odstranit klasické zásady",
- "classicPolicyDeleteInProgressTitle": "Odstraňují se klasické zásady",
- "classicPolicyDeleteSuccessTitle": "Klasické zásady se odstranily",
- "classicPolicyDetailBladeTitle": "Podrobnosti",
- "classicPolicyDisableCommand": "Zakázat",
- "classicPolicyDisableConfirmation": "Opravdu chcete zakázat zásady {0}? Tato akce je nevratná.",
- "classicPolicyDisableFailDescription": "Nepovedlo se zakázat zásady {0}.",
- "classicPolicyDisableFailTitle": "Nepovedlo se zakázat klasické zásady",
- "classicPolicyDisableInProgressDescription": "Zakazují se zásady {0}.",
- "classicPolicyDisableInProgressTitle": "Zakazují se klasické zásady",
- "classicPolicyDisableSuccessDescription": "Zásady {0} se úspěšně zakázaly.",
- "classicPolicyDisableSuccessTitle": "Klasické zásady se zakázaly",
- "classicPolicyEasSupportedPlatforms": "Podporované platformy protokolu Exchange ActiveSync",
- "classicPolicyEasUnsupportedPlatforms": "Nepodporované platformy protokolu Exchange ActiveSync",
- "classicPolicyExcludedPlatformsTitle": "Vyloučené platformy zařízení",
- "classicPolicyFilterAll": "Všechny zásady",
- "classicPolicyFilterDisabled": "Zakázané zásady",
- "classicPolicyFilterEnabled": "Povolené zásady",
- "classicPolicyIncludeExcludeMembersDescription": "Vyloučením skupin je možné provést migraci zásad rozdělenou do fází.",
- "classicPolicyIncludeExcludeMembersTitle": "Zahrnout nebo vyloučit skupiny",
- "classicPolicyIncludedPlatformsTitle": "Zahrnuté platformy zařízení",
- "classicPolicyManualMigrationMessage": "Tyto zásady se musí migrovat ručně.",
- "classicPolicyMigrateCommand": "Migrovat",
- "classicPolicyMigrateConfirmation": "Opravdu chcete migrovat zásady {0}? Tyto zásady se dají migrovat jen jednou.",
- "classicPolicyMigrateFailDescription": "Nepovedlo se migrovat zásady {0}.",
- "classicPolicyMigrateFailTitle": "Nepovedlo se migrovat klasické zásady",
- "classicPolicyMigrateInProgressDescription": "Migrují se zásady {0}.",
- "classicPolicyMigrateInProgressTitle": "Migrují se klasické zásady",
- "classicPolicyMigrateRecommendText": "Doporučení: Proveďte migraci na nové zásady portálu Azure Portal.",
- "classicPolicyMigrateSuccessTitle": "Klasické zásady se úspěšně migrovaly",
- "classicPolicyMigratedSuccessDescription": "Tyto klasické zásady se teď dají spravovat v části Zásady.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "Tyto klasické zásady se migrovaly jako následující počet nových zásad: {0}. Nové zásady se dají spravovat v části Zásady.",
- "classicPolicyNoEditPermissionMsg": "Nemáte oprávnění upravovat tyto zásady. To můžou dělat jen globální správci a správci zabezpečení. Další informace získáte tady.",
- "classicPolicySaveFailDescription": "Nepovedlo se uložit zásady {0}.",
- "classicPolicySaveFailTitle": "Nepovedlo se uložit klasické zásady",
- "classicPolicySaveInProgressDescription": "Ukládají se zásady {0}.",
- "classicPolicySaveInProgressTitle": "Ukládají se klasické zásady",
- "classicPolicySaveSuccessDescription": "Zásady {0} se úspěšně uložily.",
- "classicPolicySaveSuccessTitle": "Klasické zásady se uložily",
- "clientAppBladeLegacyInfoBanner": "Starší verze ověřování se v tuto chvíli nepodporuje.",
- "clientAppBladeLegacyUpsellBanner": "Zablokovat nepodporované klientské aplikace (Preview)",
- "clientAppBladeTitle": "Klientské aplikace",
- "clientAppDescription": "Vyberte klientské aplikace, na které se budou tyto zásady vztahovat.",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync v tuto chvíli nepodporuje všechny ostatní podmínky.",
- "clientAppLearnMore": "Umožňuje nastavit přístup uživatelů na cílení na konkrétní klientské aplikace, které nepoužívají moderní ověřování.",
- "clientAppLegacyHeader": "Starší verze klientů ověřování",
- "clientAppMobileDesktop": "Mobilní aplikace a desktopoví klienti",
- "clientAppModernHeader": "Moderní klienti ověřování",
- "clientAppOnlySupportedPlatforms": "Použít zásady jenom na podporovaných platformách",
- "clientAppSelectSpecificClientApps": "Vyberte klientské aplikace.",
- "clientAppWebBrowser": "Prohlížeč",
- "clientAppsSelectedLabel": "Zahrnuto: {0}",
- "clientTypeBrowser": "Prohlížeč",
- "clientTypeEas": "Klienti Exchange ActiveSync",
- "clientTypeEasInfo": "Jen klienti Exchange ActiveSync, kteří používají starší verzi ověřování",
- "clientTypeModernAuth": "Klienti moderního ověřování",
- "clientTypeOtherClients": "Ostatní klienti",
- "clientTypeOtherClientsInfo": "Mezi to patří starší klienti Office a další poštovní protokoly (POP, IMAP, SMTP apod.). [Další informace][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "Cloudové aplikace {0} nakonfigurované v těchto zásadách se odstranily z adresáře, ale na ostatní aplikace v zásadách to nemá žádný vliv. Až v zásadách příště aktualizujete oddíl aplikací, odstraněné aplikace se z nich automaticky odeberou.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Všechny aplikace Microsoftu",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Povolit desktopové a mobilní aplikace a aplikace Microsoft Cloudu (Preview)",
- "cloudappsSelectionBladeAllCloudapps": "Všechny cloudové aplikace",
- "cloudappsSelectionBladeExcludeDescription": "Vyberte cloudové aplikace, které se mají z této zásady vyloučit.",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Vybrat vyloučené cloudové aplikace",
- "cloudappsSelectionBladeIncludeDescription": "Vyberte cloudové aplikace, na které se budou vztahovat tyto zásady.",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Vybrat",
- "cloudappsSelectionBladeSelectedCloudapps": "Vybrat aplikace",
- "cloudappsSelectorInfoBallonText": "Služby, ke kterým uživatel přistupuje, aby mohl pracovat. Třeba Salesforce.",
- "cloudappsSelectorPluralExcluded": "Vyloučené aplikace: {0}",
- "cloudappsSelectorPluralIncluded": "Zahrnuté aplikace: {0}",
- "cloudappsSelectorSingularExcluded": "1 vyloučená aplikace",
- "cloudappsSelectorSingularIncluded": "1 zahrnutá aplikace",
- "cloudappsSelectorUserPlural": "Počet aplikací: {0}",
- "cloudappsSelectorUserSingular": "Počet aplikací: 1",
- "conditionLabelMulti": "Počet vybraných podmínek: {0}",
- "conditionLabelOne": "Počet vybraných podmínek: 1",
- "conditionalAccessBladeTitle": "Podmíněný přístup",
- "conditionsNotSelectedLabel": "Nenakonfigurováno",
- "conditionsReqMfaReauthSet": "Některé možnosti nejsou dostupné kvůli aktuálně vybranému oprávnění Vyžadovat vícefaktorové ověřování a řízení relace s frekvencí přihlašování typu pokaždé.",
- "conditionsReqPwSet": "Některé možnosti nejsou k dispozici, protože je v tuto chvíli vybrané oprávnění Požadovat změnu hesla.",
- "configureCasText": "Konfigurovat Cloud App Security",
- "configureCustomControlsText": "Nakonfigurovat vlastní zásady",
- "controlLabelMulti": "Počet vybraných ovládacích prvků: {0}",
- "controlLabelOne": "Počet vybraných ovládacích prvků: 1",
- "controlValidatorText": "Vyberte prosím aspoň jeden ovládací prvek.",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Přečtěte si další informace o vyžadování zařízení dodržujících předpisy.",
- "controlsDeviceComplianceInfoBubble": "Zařízení musí dodržovat předpisy Intune. Pokud je nedodržuje, zobrazí se uživateli výzva, aby zařízení nastavil tak, aby předpisy dodržovalo.",
- "controlsDomainJoinedAriaLabel": "Přečtěte si další informace o vyžadování zařízeních hybridně připojených k Microsoft Entra.",
- "controlsDomainJoinedInfoBubble": "Zařízení musí být hybridně připojená k Microsoft Entra.",
- "controlsMamAriaLabel": "Další informace o vyžadování schválených klientských aplikací.",
- "controlsMamInfoBubble": "Zařízení musí používat tyto aplikace schválené klientem.",
- "controlsMfaInfoBubble": "Uživatelé musí splnit další požadavky na zabezpečení, třeba telefonní hovor nebo textovou zprávu.",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Další informace o vyžadování aplikací chráněných zásadami.",
- "controlsRequireCompliantAppInfoBubble": "Zařízení musí používat aplikace chráněné zásadami.",
- "controlsRequirePasswordResetAriaLabel": "Další informace o vyžadování změny hesla.",
- "controlsRequirePasswordResetInfoBubble": "Umožňuje požadovat změnu hesla, aby se snížilo riziko uživatele. Tato možnost navíc vyžaduje vícefaktorové ověřování. Jiné ovládací prvky se nedají použít.",
- "countriesRadiobuttonInfoBalloonContent": "Země nebo oblast, ze které pochází přihlášení, je určená IP adresou uživatele.",
- "createNewVpnCert": "Nový certifikát",
- "createdTimeLabel": "Čas vytvoření",
- "customRoleLabel": "Vlastní role (nepodporuje se)",
- "dateRangeTypeLabel": "Rozsah dat",
- "daysOfWeekPlaceholderText": "Filtrovat dny v týdnu",
- "daysOfWeekTypeLabel": "Dny v týdnu",
- "deletePolicyNoLicenseText": "Tyto zásady teď můžete odstranit. Jakmile se odstraní, nebudete je moct vytvořit znovu, dokud nebudete mít potřebné licence.",
- "descriptionContentForControlsAndOr": "Pro více ovládacích prvků",
- "devicePlatform": "Platforma zařízení",
- "devicePlatformConditionHelpDescription": "Zavede zásady pro vybrané platformy zařízení.\n[Další informace][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "Zahrnuto: {0}",
- "devicePlatformIncludeExclude": "Vyloučeno: {0} a {1}",
- "devicePlatformNoSelectionError": "Výběr platforem zařízení vyžaduje, aby se vybrala alespoň jedna podpoložka.",
- "devicePlatformsNone": "Žádný",
- "deviceSelectionBladeExcludeDescription": "Vyberte platformy, které se mají z této zásady vyloučit.",
- "deviceSelectionBladeIncludeDescription": "Vyberte platformy zařízení, které se mají zahrnout do těchto zásad.",
- "deviceStateAll": "Všechny stavy zařízení",
- "deviceStateCompliant": "Zařízení označené jako kompatibilní",
- "deviceStateCompliantInfoContent": "Zařízení kompatibilní s Intune nebudou součástí vyhodnocování těchto zásad, takže pokud zásady blokují třeba přístup, zablokují ho pro všechna zařízení kromě těch, která jsou kompatibilní s Intune.",
- "deviceStateConditionConfigureInfoContent": "Nakonfigurovat zásady na základě stavu zařízení",
- "deviceStateConditionSelectorInfoContent": "Označuje, jestli je zařízení, ze kterého se uživatel přihlašuje, hybridně připojené k Microsoft Entra nebo označené jako odpovídající.\n Tato možnost je teď už zastaralá. Místo toho použijte možnost {1}.",
- "deviceStateConditionSelectorLabel": "Stav zařízení (zastaralý)",
- "deviceStateDomainJoined": "Zařízení hybridně připojené k Microsoft Entra",
- "deviceStateDomainJoinedInfoContent": "Zařízení hybridně připojená k Microsoft Entra nebudou součástí vyhodnocování těchto zásad, takže pokud zásady blokují třeba přístup, zablokují ho pro všechna zařízení kromě těch, která jsou hybridně připojená k Microsoft Entra.",
- "deviceStateDomainJoinedInfoLinkText": "Další informace",
- "deviceStateExcludeDescription": "Vyberte podmínku stavu zařízení, na základě které se zařízení vyloučí ze zásad.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} a vyloučit {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} a vyloučit {1}, {2}",
- "directoryRoleInfoContent": "Přiřadit zásady k integrovaným rolím adresáře",
- "directoryRolesLabel": "Role adresáře",
- "discardbutton": "Zahodit",
- "downloadDefaultFileName": "Rozsahy IP adres",
- "downloadExampleFileName": "Příklad",
- "downloadExampleHeader": "Toto je ukázkový soubor s ukázkami typů dat, které se dají přijmout. Řádky, které začínají znakem #, se budou ignorovat.",
- "duplicate": "Duplikovat",
- "duplicatePolicyName": "{0} – KOPIE",
- "endDatePickerLabel": "Končí",
- "endTimePickerLabel": "Koncový čas",
- "enterCountryText": "IP adresa a země/oblast se vyhodnocují v páru. Vyberte zemi.",
- "enterIpText": "IP adresa a země/oblast se vyhodnocují v páru. Zadejte IP adresu.",
- "enterUserText": "Nevybral se žádný uživatel. Vyberte nějakého uživatele.",
- "evaluationResult": "Výsledek hodnocení",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Protokol Exchange ActiveSync jen s podporovanými platformami",
- "excludeAllTrustedLocationSelectorText": "všechna důvěryhodná umístění",
- "featureRequiresP2": "Tato funkce vyžaduje licenci Microsoft Entra ID P2.",
- "friday": "Pátek",
- "grantControls": "Udělit řízení",
- "gridNetworkTrusted": "Důvěryhodná",
- "gridPolicyCreatedDateTime": "Datum vytvoření",
- "gridPolicyEnabled": "Povoleno",
- "gridPolicyModifiedDateTime": "Datum změny",
- "gridPolicyName": "Název zásady",
- "gridPolicyState": "Stav",
- "groupSelectionBladeExcludeDescription": "Vyberte skupiny, které se mají z těchto zásad vyloučit.",
- "groupSelectionBladeExcludedSelectorTitle": "Vybrat vyloučené skupiny",
- "groupSelectionBladeSelect": "Výběr skupin",
- "groupSelectorInfoBallonText": "Skupiny v adresáři, pro které platí tyto zásady. Příklad: Pilotní skupina.",
- "groupsSelectionBladeTitle": "Skupiny",
- "helpCommonScenariosText": "Zajímají vás obvyklé scénáře?",
- "helpCondition1": "Když je libovolný uživatel mimo síť společnosti",
- "helpCondition2": "Když se přihlásí uživatelé ze skupiny Manažeři",
- "helpConditionsTitle": "Podmínky",
- "helpControl1": "Musí se přihlašovat pomocí vícefaktorového ověřování",
- "helpControl2": "Musí být na zařízení, které dodržuje předpisy Intune nebo na zařízení připojeném do domény.",
- "helpControlsTitle": "Ovládací prvky",
- "helpIntroText": "Podmíněný přístup umožňuje vynucovat specifické požadavky na přístup na základě splnění konkrétních podmínek. Podívejme se na pár příkladů.",
- "helpIntroTitle": "Co je Podmíněný přístup?",
- "helpLearnMoreText": "Zajímají vás další informace o Podmíněném přístupu?",
- "helpStartStep1": "Vytvořte svoje první zásady tak, že kliknete na + Nové zásady.",
- "helpStartStep2": "Zadejte ovládací prvky a podmínky zásad",
- "helpStartStep3": "Až to budete mít, nezapomeňte na vytvoření a povolení zásady.",
- "helpStartTitle": "Začínáme",
- "highRisk": "Vysoká",
- "includeAndExcludeAppsTextFormat": "Zahrnout: {0}. Vyloučit: {1}",
- "includeAppsTextFormat": "Zahrnout: {0}",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Neznámé oblasti jsou IP adresy, které nejdou namapovat na zemi nebo oblast.",
- "includeUnknownAreasCheckboxLabel": "Včetně neznámých oblastí",
- "infoCommandLabel": "Informace",
- "invalidCertDuration": "Neplatná doba platnosti certifikátu",
- "invalidIpAddress": "Hodnotou musí být platná IP adresa.",
- "invalidReAuthSignInRiskOptionSelected": "Kontrolní prvek relace „Frekvence přihlášení (pokaždé)“ nepovoluje výběr „bez rizika“ v ovládacím prvku podmínky „Riziko přihlášení“.",
- "invalidUriErrorMsg": "Zadejte prosím platný identifikátor URI. Příklad: uri:contoso.com:acr ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Načíst vše",
- "loading": "Načítá se...",
- "locationConfigureNamedLocationsText": "Konfigurace všech důvěryhodných umístění",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Název umístění je moc dlouhý. Maximum je 256 znaků.",
- "locationSelectionBladeExcludeDescription": "Vyberte místa, která se mají z této zásady vyloučit.",
- "locationSelectionBladeIncludeDescription": "Vyberte umístění, která se zahrnou do těchto zásad.",
- "locationsAllLocationsLabel": "Libovolné umístění",
- "locationsAllNamedLocationsLabel": "Všechny důvěryhodné IP adresy",
- "locationsAllPrivateLinksLabel": "Všechna privátní propojení v mém tenantovi",
- "locationsIncludeExcludeLabel": "{0} a vyloučit všechny důvěryhodné IP adresy",
- "locationsSelectedPrivateLinksLabel": "Vybraná privátní propojení",
- "lowRisk": "Nízká",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "Pokud chcete spravovat zásady podmíněného přístupu, vaše organizace potřebuje Microsoft Entra ID P1 nebo P2.",
- "manageSecurityDefaultsAriaLabel": "Umožňuje spravovat výchozí nastavení zabezpečení.",
- "markAsTrustedCheckboxInfoBalloonContent": "Přihlášení z důvěryhodného umístění snižuje riziko přihlášení uživatele. Toto umístění jako důvěryhodné označte jenom tehdy, pokud víte, že zadané rozsahy IP adres jsou zřízené a důvěryhodné ve vaší organizaci.",
- "markAsTrustedCheckboxLabel": "Označit jako důvěryhodné umístění",
- "mediumRisk": "Střední",
- "memberSelectionCommandRemove": "Odebrat",
- "menuItemClaimProviderControls": "Vlastní ovládací prvky (Preview)",
- "menuItemClassicPolicies": "Klasické zásady",
- "menuItemInsightsAndReporting": "Přehledy a generování sestav",
- "menuItemManage": "Spravovat",
- "menuItemNamedLocationsPreview": "Pojmenovaná umístění (Preview)",
- "menuItemNamedNetworks": "Pojmenovaná umístění",
- "menuItemPolicies": "Zásady",
- "menuItemTermsOfUse": "Podmínky použití",
- "modifiedTimeLabel": "Čas změny",
- "monday": "Pondělí",
- "nameLabel": "Název",
- "namedLocationCountryInfoBanner": "Na země/oblasti se mapují jen IPv4 adresy. IPv6 adresy se zahrnují do neznámých zemí/oblastí.",
- "namedLocationTypeCountry": "Země nebo oblasti",
- "namedLocationTypeLabel": "Definovat umístění pomocí:",
- "namedLocationUpsellBanner": "Toto zobrazení je zastaralé. Přejděte do nového a vylepšeného zobrazení Pojmenovaná umístění.",
- "namedLocationsHelpDescription": "Pojmenovaná umístění se používají v sestavách zabezpečení Microsoft Entra ID, aby se snížil počet falešně pozitivních výsledků, a v zásadách Podmíněného přístupu Microsoft Entra.\n[Další informace][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Přidat nový rozsah IP adres (např.: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "Je třeba vybrat aspoň jednu zemi/oblast.",
- "namedNetworkDeleteCommand": "Odstranit",
- "namedNetworkDeleteDescription": "Opravdu chcete odstranit síť {0}? Tato akce je nevratná.",
- "namedNetworkDeleteTitle": "Jste si jistí?",
- "namedNetworkDownloadIpRange": "Stáhnout",
- "namedNetworkInvalidRange": "Hodnotou musí být platný rozsah IP adres.",
- "namedNetworkIpRangeNeeded": "Potřebujete aspoň jeden platný rozsah IP adres.",
- "namedNetworkIpRangesDescriptionContent": "Nakonfigurujte rozsahy IP adres vaší organizace.",
- "namedNetworkIpRangesTab": "Rozsahy IP adres",
- "namedNetworkListAdd": "Nové umístění",
- "namedNetworkListConfigureTrustedIps": "Konfigurace důvěryhodných IP adres vícefaktorového ověřování",
- "namedNetworkNameDescription": "Příklad: Pobočka Pardubice",
- "namedNetworkNameInvalid": "Zadaný název není platný.",
- "namedNetworkNameRequired": "Pro toto umístění musíte zadat název.",
- "namedNetworkNoIpRanges": "Žádné rozsahy IP adres",
- "namedNetworkNotificationCreateDescription": "Vytváří se umístění s názvem {0}.",
- "namedNetworkNotificationCreateFailedDescription": "Umístění {0} se nepovedlo vytvořit. Zkuste to prosím znovu později.",
- "namedNetworkNotificationCreateFailedTitle": "Nepovedlo se vytvořit umístění",
- "namedNetworkNotificationCreateSuccessDescription": "Umístění s názvem {0} se vytvořilo.",
- "namedNetworkNotificationCreateSuccessTitle": "Vytvořila se síť {0}",
- "namedNetworkNotificationCreateTitle": "Vytváří se {0}",
- "namedNetworkNotificationDeleteDescription": "Odstraňuje se umístění s názvem {0}.",
- "namedNetworkNotificationDeleteFailedDescription": "Umístění {0} se nepovedlo odstranit. Zkuste to prosím znovu později.",
- "namedNetworkNotificationDeleteFailedTitle": "Nepovedlo se odstranit umístění",
- "namedNetworkNotificationDeleteSuccessDescription": "Umístění s názvem {0} se odstranilo.",
- "namedNetworkNotificationDeleteSuccessTitle": "Odstranila se síť {0}",
- "namedNetworkNotificationDeleteTitle": "Odstraňuje se {0}.",
- "namedNetworkNotificationUpdateDescription": "Aktualizuje se umístění s názvem {0}.",
- "namedNetworkNotificationUpdateFailedDescription": "Umístění {0} se nepovedlo aktualizovat. Zkuste to prosím znovu později.",
- "namedNetworkNotificationUpdateFailedTitle": "Nepovedlo se aktualizovat umístění",
- "namedNetworkNotificationUpdateSuccessDescription": "Umístění s názvem {0} se aktualizovalo.",
- "namedNetworkNotificationUpdateSuccessTitle": "Aktualizovala se síť {0}",
- "namedNetworkNotificationUpdateTitle": "Aktualizuje se {0}",
- "namedNetworkSearchPlaceholder": "Hledat v umístěních",
- "namedNetworkUploadFailedDescription": "Při parsování zadaného souboru došlo k chybě. Ujistěte se prosím, že odesíláte textový soubor, ve kterém má každý řádek formát CIDR.",
- "namedNetworkUploadFailedTitle": "Nepodařilo se analyzovat {0}.",
- "namedNetworkUploadInProgressDescription": "Probíhá pokus o parsování platných hodnot CIDR z {0}.",
- "namedNetworkUploadInProgressTitle": "Parsování souboru {0}",
- "namedNetworkUploadInvalidDescription": "Soubor {0} je buď moc velký, nebo nemá platný formát.",
- "namedNetworkUploadInvalidTitle": "Soubor {0} není platný",
- "namedNetworkUploadIpRange": "Nahrát",
- "namedNetworkUploadSuccessDescription": "Analyzoval se tento počet řádků: {0}. Tento počet z nich měl špatný formát: {1}. Tento počet se přeskočil: {2}",
- "namedNetworkUploadSuccessTitle": "Parsování souboru {0} se dokončilo",
- "namedNetworksAdd": "Nové pojmenované umístění",
- "namedNetworksConditionHelpDescription": "Umožňuje řídit přístup uživatelů na základě fyzické polohy.\n[Další informace][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "Vyloučeno: {0} a {1}",
- "namedNetworksHelpDescription": "Pojmenovaná umístění se používají v sestavách zabezpečení Microsoft Entra ID, aby se snížil počet falešně pozitivních výsledků, a v zásadách Podmíněného přístupu Microsoft Entra.\n[Další informace][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "Zahrnuto: {0}",
- "namedNetworksNone": "Nenašla se žádná pojmenovaná umístění.",
- "namedNetworksTitle": "Konfigurovat místa",
- "namednetworkExceedingSizeErrorBladeTitle": "Podrobnosti o chybě",
- "namednetworkExceedingSizeErrorDetailText": "Podrobnosti zobrazíte kliknutím sem.",
- "namednetworkExceedingSizeErrorMessage": "Překročili jste maximální povolené úložiště pro pojmenovaná umístění. Zkuste to znovu s kratším seznamem. Další podrobnosti získáte, když kliknete sem.",
- "needMfaSecondary": "Pokud je vybrané řízení relace s frekvencí přihlašování typu pokaždé a s možností Pouze sekundární metody ověřování, musíte vybrat možnost Vyžadovat vícefaktorové ověřování.",
- "needMfaSpecificApps": "Když jsou vybrány specificky podporované aplikace, řízení relace s frekvencí přihlašování typu pokaždé vyžaduje řízení oprávnění Vyžadovat vícefaktorové ověřování.",
- "newCertName": "nový certifikát",
- "noAttributePermissionsError": "K vytvoření nebo aktualizaci zásad nejsou k dispozici dostatečná oprávnění. Pro přidání nebo úpravu dynamických filtrů se vyžaduje role čtenáře definic atributů.",
- "noPolicyRowMessage": "Žádné zásady",
- "noSPSelected": "Žádný vybraný objekt služby",
- "noUpdatePermissionMessage": "K aktualizaci těchto nastavení nemáte oprávnění. Pokud chcete získat přístup, obraťte se prosím na globálního správce.",
- "noUserSelected": "Nevybral se žádný uživatel.",
- "noneRisk": "Žádné riziko",
- "office365Description": "Mezi tyto aplikace patří Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer a další.",
- "office365InfoBox": "Nejméně jedna vybraná aplikace je součástí Office 365. Doporučujeme zásady nastavit přímo pro aplikaci Office 365.",
- "oneUserSelected": "Vybral se 1 uživatel.",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Tyto zásady můžou uložit jen globální správci.",
- "or": "{0} NEBO {1} ",
- "pickerDoneCommand": "Hotovo",
- "policiesBladeAdPremiumUpsellBannerText": "Se službou Microsoft Entra ID Premium můžete vytvářet své vlastní zásady s cílením na konkrétní podmínky, třeba cloudové aplikace, riziko přihlášení a platformy zařízení.",
- "policiesBladeTitle": "Zásady",
- "policiesBladeTitleWithAppName": "Zásady: {0}",
- "policiesDisabledBannerText": "Pro aplikace s propojeným atributem registrace jsou vytváření a úpravy zásady zakázané.",
- "policiesHitMaxLimitStatusBarMessage": "Pro tohoto tenanta jste dosáhli maximálního počtu zásad. Než vytvoříte další zásady, některé prosím odstraňte.",
- "policyAssignmentsSection": "Přiřazení",
- "policyBlockAllInfoBox": "Nakonfigurovaná zásada zablokuje všechny uživatele, takže se nepodporuje. Zkontrolujte přiřazení a kontrolní mechanismy. Pokud chcete tuto zásadu uložit, vylučte aktuálního uživatele {0}.",
- "policyCloudAppsDisplayTextAllApp": "Všechny aplikace",
- "policyCloudAppsLabel": "Cloudové aplikace",
- "policyConditionClientAppDescription": "Software, který uživatel používá pro přístup ke cloudové aplikaci. Třeba prohlížeč.",
- "policyConditionClientAppV2Description": "Software, který uživatel používá pro přístup ke cloudové aplikaci. Třeba prohlížeč.",
- "policyConditionDevicePlatform": "Platformy zařízení",
- "policyConditionDevicePlatformDescription": "Platforma, ze které se uživatel přihlašuje. Třeba iOS.",
- "policyConditionLocation": "Umístění",
- "policyConditionLocationDescription": "Lokalita, ze které se uživatel přihlašuje (určuje se podle rozsahu IP adres)",
- "policyConditionLocationPreview": "Umístění (Preview)",
- "policyConditionSigninRisk": "Riziko přihlášení",
- "policyConditionSigninRiskDescription": "Pravděpodobnost, že se přihlašuje někdo jiný než daný uživatel. Úroveň rizika může být vysoká, střední nebo nízká. Vyžaduje licenci Microsoft Entra ID P2.",
- "policyConditionUserRisk": "Riziko uživatele",
- "policyConditionUserRiskDescription": "Umožňuje nakonfigurovat úrovně rizika uživatelů potřebné k vynucování zásad.",
- "policyConditioniClientApp": "Klientské aplikace",
- "policyControlAllowAccessDisplayedName": "Udělit přístup",
- "policyControlAuthenticationStrengthDisplayedName": "Vyžadovat sílu ověřování (Preview)",
- "policyControlBladeTitle": "Udělení",
- "policyControlBlockAccessDisplayedName": "Blokovat přístup",
- "policyControlCompliantDeviceDisplayedName": "Vyžadovat, aby zařízení bylo označené jako vyhovující",
- "policyControlContentDescription": "Umožňuje nastavit vynucování přístupu a blokovat nebo udělovat přístup.",
- "policyControlInfoBallonText": "Zablokujte přístup nebo vyberte další požadavky, které je třeba splnit pro povolení přístupu.",
- "policyControlMfaChallengeDisplayedName": "Vyžadovat vícefaktorové ověřování",
- "policyControlRequireCompliantAppDisplayedName": "Vyžadovat zásady ochrany aplikací",
- "policyControlRequireDomainJoinedDisplayedName": "Vyžadovat zařízení hybridně připojené k Microsoft Entra",
- "policyControlRequireMamDisplayedName": "Vyžaduje se klientem schválená aplikace.",
- "policyControlRequiredPasswordChangeDisplayedName": "Požadovat změnu hesla",
- "policyControlSelectAuthStrength": "Vyžadovat sílu ověřování",
- "policyControlsNoControlsSelected": "0 vybraných ovládacích prvků",
- "policyControlsSection": "Ovládací prvky přístupu",
- "policyCreatBladeTitle": "Nový",
- "policyCreateButton": "Vytvořit",
- "policyCreateFailedMessage": "Chyba: {0}",
- "policyCreateFailedTitle": "Nepovedlo se vytvořit zásady {0}",
- "policyCreateInProgressTitle": "Vytváří se {0}",
- "policyCreateSuccessMessage": "Zásady {0} se úspěšně vytvořily. Pokud máte možnost Povolit zásadu nastavenou na Zapnuto, zásady se za několik minut povolí.",
- "policyCreateSuccessTitle": "Úspěšně se vytvořily zásady {0}",
- "policyDeleteConfirmation": "Opravdu chcete odstranit síť {0}? Tato akce je nevratná.",
- "policyDeleteFailTitle": "{0} se nepovedlo odstranit.",
- "policyDeleteInProgressTitle": "Odstraňuje se {0}.",
- "policyDeleteSuccessTitle": "Branding {0} se úspěšně odstranil.",
- "policyEnforceLabel": "Povolit zásadu",
- "policyErrorCannotSetSigninRisk": "Nemáte oprávnění ukládat zásady s rizikovým stavem přihlášení.",
- "policyErrorNoPermission": "Nemáte oprávnění ukládat zásady. Obraťte se na svého globálního správce.",
- "policyErrorUnknown": "Stala se nějaká chyba, zkuste to prosím později.",
- "policyFallbackWarningMessage": "V MS Graphu nebyla vytvořena nebo aktualizována položka {0}, a proto se použila náhradní funkce AD Graph. Prověřte prosím uvedený scénář, protože při volání koncového bodu pro MS Graph s největší pravděpodobností došlo k chybě způsobené nekompatibilní podmínkou.",
- "policyFallbackWarningTitle": "Vytváření nebo aktualizace {0} bylo částečně úspěšné",
- "policyNameCannotBeEmpty": "Název zásad nemůže být prázdný.",
- "policyNameDevice": "Zásady zařízení",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Zásady správy mobilních aplikací",
- "policyNameMfaLocation": "Zásady vícefaktorového ověřování a umístění",
- "policyNamePlaceholderText": "Příklad: Zásady aplikace pro dodržování předpisů zařízením",
- "policyNameTooLongError": "Název zásad je moc dlouhý. Maximum je 256 znaků.",
- "policyOff": "Vypnuté",
- "policyOn": "Zapnuté",
- "policyReportOnly": "Pouze sestavy",
- "policyReviewSection": "Zkontrolovat",
- "policySaveButton": "Uložit",
- "policyStatusIconDescription": "Zásady jsou povolené",
- "policyStatusIconEnabled": "Ikona povoleného stavu",
- "policyTemplateName1": "Pro přístup k aplikaci {0} z prohlížeče použít omezení vynucená aplikací",
- "policyTemplateName2": "Povolit přístup k aplikaci {0} jenom ze spravovaných zařízení",
- "policyTemplateName3": "Zásady migrované z nastavení nepřetržitého vyhodnocování přístupu",
- "policyTriggerRiskSpecific": "Zadejte konkrétní úroveň rizika",
- "policyTriggersInfoBalloonText": "Podmínky, které definují, kdy se zásady použijí. Třeba lokalita.",
- "policyTriggersNoConditionsSelected": "0 vybraných podmínek",
- "policyTriggersSelectorLabel": "Podmínky",
- "policyUpdateFailedMessage": "Chyba: {0}",
- "policyUpdateFailedTitle": "Aplikaci {0} se nepodařilo aktualizovat.",
- "policyUpdateInProgressTitle": "Aktualizuje se {0}.",
- "policyUpdateSuccessMessage": "Zásada {0} se úspěšně aktualizovala. Povolí se za několik minut, pokud máte možnost Povolit zásadu nastavenou na Zapnuto.",
- "policyUpdateSuccessTitle": "Aplikace {0} byla úspěšně aktualizována.",
- "primaryCol": "Primární",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "Režim pouze sestav: Zásady se vyhodnocují a protokolují při přihlašování, ale na uživatele nemají vliv.",
- "requireAllControlsText": "Vyžadovat všechny vybrané ovládací prvky",
- "requireCompliantDevice": "Vyžaduje zařízení, které splňuje požadavky.",
- "requireDomainJoined": "Vyžadovat zařízení připojené k doméně",
- "requireGrantReauth": "Řízení relace s frekvencí přihlašování typu pokaždé vyžaduje, aby oprávnění Vyžadovat vícefaktorové ověřování nebo Vyžadovat změnu hesla udělilo oprávnění pro řízení, když je vybraná možnost Všechny cloudové aplikace",
- "requireMFA": "Vyžadovat vícefaktorové ověřování",
- "requireMfaReauth": "Řízení relace s frekvencí přihlašování typu pokaždé vyžaduje, aby oprávnění Vyžadovat vícefaktorové ověřování udělilo oprávnění pro řízení rizika přihlašování",
- "requireOneControlText": "Vyžadovat jeden z vybraných ovládacích prvků",
- "requirePasswordChangeReauth": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje řízení udělování „vyžadovat změnu hesla“ pro „riziko uživatele“.",
- "requireRiskReauth": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje řízení relace „riziko uživatele“ nebo „riziko přihlášení“, když je vybráno „všechny cloudové aplikace“.",
- "requireRiskReauthRiskNotEnabled": "Řízení relace „frekvence přihlašování pokaždé“ není k dispozici, když je vybráno „všechny cloudové aplikace“.",
- "requireRiskReauthSignInOnly": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje řízení relace „riziko přihlášení“, když je vybráno „všechny cloudové aplikace“.",
- "requireRiskReauthUserOnly": "Řízení relace „frekvence přihlašování pokaždé“ vyžaduje řízení relace „riziko uživatele“, když je vybráno „všechny cloudové aplikace“.",
- "resetFilters": "Resetovat filtry",
- "sPRequired": "Vyžaduje se objekt služby",
- "sPSelectorInfoBalloon": "Uživatel nebo objekt služby, který chcete otestovat",
- "saturday": "Sobota",
- "searchTextTooLongError": "Hledaný text je příliš dlouhý. Maximum je 256 znaků.",
- "securityDefaultsPolicyName": "Výchozí nastavení zabezpečení",
- "securityDefaultsTextMessage": "Aby bylo možné povolit zásady podmíněného přístupu, musí se zakázat výchozí nastavení zabezpečení.",
- "securityDefaultsUpdateInProgressText": "Probíhá aktualizace výchozího nastavení zabezpečení. Počkejte prosím chvíli a zkuste to znovu.",
- "securityDefaultsWarningMessage": "Vypadá to, že se chystáte spravovat konfigurace zabezpečení organizace. Výborně! Abyste mohli povolit zásady podmíněného přístupu, musí se nejprve {0}zakázat výchozí nastavení zabezpečení{1}.",
- "selectDevicePlatforms": "Vybrat platformy zařízení",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Vybrat umístění",
- "selectedSP": "Vybraný objekt služby",
- "servicePrincipalBladeExcludedSelectorTitle": "Vybrat vyloučené instanční objekty",
- "servicePrincipalBladeIncludedSelectorTitle": "Vybrat instanční objekty",
- "servicePrincipalDataGridAria": "Seznam dostupných objektů služby",
- "servicePrincipalDropDownLabel": "Na co se vztahují tyto zásady?",
- "servicePrincipalInfoBox": "Některé podmínky nejsou k dispozici kvůli výběru {0} v přiřazení zásad.",
- "servicePrincipalRadioAll": "Všechny vlastněné objekty služby",
- "servicePrincipalRadioSelect": "Vybrat objekty služby",
- "servicePrincipalSelectionsAria": "Mřížka vybraných objektů služby",
- "servicePrincipalSelectorAria": "Seznam vybraných objektů služby",
- "servicePrincipalSelectorMultiple": "Počet vybraných objektů služby: {0}",
- "servicePrincipalSelectorSingle": "1 vybraný objekt služby",
- "servicePrincipalSpecificExc": "Konkrétní objekty služby jsou vyloučeny",
- "servicePrincipalSpecificInc": "Včetně konkrétních objektů služby",
- "servicePrincipals": "Objekty služby",
- "sessionControlBladeTitle": "Relace",
- "sessionControlDescriptionContent": "Umožňuje nastavit přístup podle ovládacích prvků relací, aby bylo možné omezit prostředí v konkrétních cloudových aplikacích.",
- "sessionControlDisableInfo": "Tento ovládací prvek funguje jen v podporovaných aplikacích. Jedinými cloudovými aplikacemi, které podporují omezení vynucená aplikací, jsou v tuto chvíli Office 365, Exchange Online a SharePoint Online. Další informace získáte kliknutím sem.",
- "sessionControlInfoBallonText": "Ovládací prvky relací umožňují používat v cloudové aplikaci omezené možnosti.",
- "sessionControls": "Ovládací prvky relací",
- "sessionControlsAppEnforcedLabel": "Používat omezení vynucená aplikací",
- "sessionControlsCasLabel": "Používat Řízení podmíněného přístupu k aplikacím",
- "sessionControlsSecureSignInLabel": "Vyžadovat vazbu tokenu",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "Zahrnuto: {0}",
- "signinRiskReauth": "Pokud je vybrané oprávnění typu Vyžadovat vícefaktorové ověřování a řízení relace s frekvencí přihlašování typu pokaždé, musíte vybrat podmínku Riziko přihlašování.",
- "signinRiskTriggerDescriptionContent": "Vyberte úroveň rizika přihlášení.",
- "singleTenantServicePrincipalInfoBallonText": "Zásady platí jenom pro instanční objekty jednoho tenanta vlastněné vaší organizací. Další informace získáte kliknutím sem. ",
- "specificSigninRiskLevelsOption": "Vyberte konkrétní úrovně rizika přihlášení.",
- "specificUsersExcluded": "konkrétní vyloučení uživatelé",
- "specificUsersIncluded": "Konkrétní zahrnutí uživatelé",
- "specificUsersIncludedAndExcluded": "Konkrétní zahrnutí nebo vyloučení uživatelé",
- "startDatePickerLabel": "Spuštění",
- "startFreeTrial": "Zahájit bezplatnou zkušební verzi",
- "startTimePickerLabel": "Počáteční čas",
- "sunday": "Neděle",
- "testButton": "What If",
- "thumbprintCol": "Miniatura",
- "thursday": "Čtvrtek",
- "timeConditionAllTimesLabel": "Kdykoli",
- "timeConditionIntroText": "Nakonfigurujte čas, po který bude tato zásada platit.",
- "timeConditionSelectorInfoBallonContent": "Kdy se uživatel přihlašuje. Například středa 9:00–17:00 SEČ.",
- "timeConditionSelectorLabel": "Čas (preview)",
- "timeConditionSpecificLabel": "Konkrétní časy",
- "timeSelectorAllTimesText": "Kdykoli",
- "timeSelectorSpecificTimesText": "Nakonfigurované konkrétní časy",
- "timeZoneDropdownInfoBalloonContent": "Vyberte časové pásmo, které definuje časový rozsah. Tato zásada platí pro uživatele ve všech časových pásmech. Například středa 9:00–17:00 pro jednoho uživatele by byla středa 10:00–18:00 pro uživatele v jiném časovém pásmu.",
- "timeZoneDropdownLabel": "Časové pásmo",
- "timeZoneDropdownPlaceholderText": "Vyberte časové pásmo.",
- "tooManyPoliciesDescription": "Momentálně se zobrazuje jenom prvních 50 zásad. Další se zobrazíte kliknutím sem.",
- "tooManyPoliciesTitle": "Našlo se více než 50 zásad",
- "trustedLocationStatusIconDescription": "Umístění je důvěryhodné.",
- "trustedLocationStatusIconEnabled": "Ikona stavu důvěryhodnosti",
- "tuesday": "Úterý",
- "uploadInBadState": "Zadaný soubor se nepovedlo nahrát.",
- "upsellAppsDescription": "U citlivých aplikací se bude vyžadovat vícefaktorové ověřování po celou dobu nebo jen při připojování z prostředí mimo firemní síť.",
- "upsellAppsTitle": "Zabezpečené aplikace",
- "upsellBannerText": "Abyste mohli použít tuto funkci, získejte bezplatnou zkušební verzi Premium.",
- "upsellDataDescription": "Pro přístup k prostředkům společnosti se bude vyžadovat, aby zařízení bylo označené jako odpovídající nebo hybridně připojené k Microsoft Entra.",
- "upsellDataTitle": "Zabezpečená data",
- "upsellDescription": "Podmíněný přístup poskytuje možnosti řízení a ochranu, které potřebujete k udržování vašich firemních dat v zabezpečeném stavu, a zároveň dává vašim pracovníkům možnosti pro efektivní práci z libovolného zařízení. Můžete například omezit přístup z prostředí mimo firemní síť nebo povolit jen přístup ze zařízení, která splňují vaše zásady dodržování předpisů.",
- "upsellRiskDescription": "Při rizikových událostech zjištěných systémem strojového učení Microsoftu se bude vyžadovat vícefaktorové ověřování.",
- "upsellRiskTitle": "Ochrana před rizikem",
- "upsellTitle": "Podmíněný přístup",
- "upsellWhyTitle": "Proč používat Podmíněný přístup?",
- "userAppNoneOption": "Žádný",
- "userNamePlaceholderText": "Zadat uživatelské jméno",
- "userNotSetSeletorLabel": "0 vybraných uživatelů a skupin",
- "userOnlySelectionBladeExcludeDescription": "Vyberte uživatele, kteří se mají z této zásady vyloučit.",
- "userOrGroupSelectionCountDiffBannerText": "{0} nakonfigurované v těchto zásadách bylo odstraněno z adresáře, ale na ostatní uživatele a skupiny v zásadách to nemá žádný vliv. Až zásady aktualizujete příště, odstranění uživatelé nebo skupiny se automaticky odeberou.",
- "userOrSPNotSetSelectorLabel": "Počet vybraných identit uživatelů nebo úloh: 0",
- "userOrSPSelectionBladeTitle": "Identity uživatelů nebo úloh",
- "userOrSPSelectorInfoBallonText": "Identity v adresáři, na které se zásady vztahují, včetně uživatelů, skupin a objektů služeb",
- "userRequired": "Je vyžadován uživatel.",
- "userRiskErrorBox": "Když se vybere oprávnění Požadovat změnu hesla, musí se vybrat podmínka Riziko uživatele.",
- "userRiskReauth": "Pokud je vybrané oprávnění typu Vyžadovat změnu hesla a řízení relace s frekvencí přihlašování typu pokaždé, musíte vybrat podmínku Riziko uživatele, ne podmínku Riziko přihlašování.",
- "userSPRequired": "Vyžaduje se uživatel nebo objekt služby.",
- "userSPSelectorTitle": "Identita uživatele nebo úlohy",
- "userSelectionBladeAllUsersAndGroups": "Všichni uživatelé a skupiny",
- "userSelectionBladeExcludeDescription": "Vyberte uživatele, kteří se mají z této zásady vyloučit.",
- "userSelectionBladeExcludeTabTitle": "Vyloučit",
- "userSelectionBladeExcludedSelectorTitle": "Vyberte vyloučené uživatele a skupiny.",
- "userSelectionBladeIncludeDescription": "Vyberte uživatele, na které se tato zásada bude vztahovat.",
- "userSelectionBladeIncludeTabTitle": "Zahrnout",
- "userSelectionBladeIncludedSelectorTitle": "Vybrat",
- "userSelectionBladeSelectUsers": "Vybrat uživatele",
- "userSelectionBladeSelectedUsers": "Vyberte uživatele a skupiny",
- "userSelectionBladeTitle": "Uživatelé a skupiny",
- "userSelectorBladeTitle": "Uživatelé",
- "userSelectorExcluded": "Vyloučeno: {0}",
- "userSelectorGroupPlural": "Počet skupin: {0}",
- "userSelectorGroupSingular": "Počet skupin: 1",
- "userSelectorIncluded": "Zahrnuto: {0}",
- "userSelectorInfoBallonText": "Uživatelé a skupiny v adresáři, pro které platí tyto zásady. Třeba pilotní skupina.",
- "userSelectorSelected": "Počet vybraných: {0}",
- "userSelectorTitle": "Uživatel",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "Uživatelé aplikace {0}",
- "userSelectorUserSingular": "Počet uživatelů: 1",
- "userSelectorWithExclusion": "{0} a {1}",
- "usersGroupsLabel": "Uživatelé a skupiny",
- "viewApprovedAppsText": "Zobrazit seznam klientem schválených aplikací",
- "viewCompliantAppsText": "Zobrazit seznam klientských aplikací chráněných zásadami",
- "viewPolicyInformation": "Zobrazit informace o zásadě",
- "vpnBladeTitle": "Připojení VPN",
- "vpnCertCreateFailedMessage": "Chyba: {0}",
- "vpnCertCreateFailedTitle": "Nepovedlo se vytvořit {0}",
- "vpnCertCreateInProgressTitle": "Vytváří se {0}.",
- "vpnCertCreateSuccessMessage": "Certifikát {0} se úspěšně vytvořil.",
- "vpnCertCreateSuccessTitle": "Zásady {0} se úspěšně vytvořily.",
- "vpnCertNoRowsMessage": "Nenašly se žádné certifikáty VPN.",
- "vpnCertUpdateFailedMessage": "Chyba: {0}",
- "vpnCertUpdateFailedTitle": "Aplikaci {0} se nepodařilo aktualizovat.",
- "vpnCertUpdateInProgressTitle": "Aktualizuje se {0}.",
- "vpnCertUpdateSuccessMessage": "Certifikát {0} se úspěšně aktualizoval.",
- "vpnCertUpdateSuccessTitle": "Aplikace {0} byla úspěšně aktualizována.",
- "vpnFeatureInfo": "Další informace o připojení VPN a Podmíněném přístupu získáte, když kliknete sem.",
- "vpnFeatureWarning": "Jakmile se na portálu vytvoří certifikát VPN, Microsoft Entra ID začne s jeho pomocí okamžitě vystavovat klientovi VPN krátkodobé certifikáty. Je naprosto nezbytné okamžitě nasadit certifikát VPN na server VPN, aby při ověřování přihlašovacích údajů klienta VPN nedošlo k žádným problémům.",
- "vpnMenuText": "Připojení VPN",
- "vpncertDropdownDefaultOption": "Doba trvání",
- "vpncertDropdownInfoBalloonContent": "Vyberte dobu platnosti certifikátu, který chcete vytvořit.",
- "vpncertDropdownLabel": "Vyberte dobu platnosti",
- "vpncertDropdownOneyearOption": "1 rok",
- "vpncertDropdownThreeyearOption": "3 roky",
- "vpncertDropdownTwoyearOption": "2 roky",
- "wednesday": "Středa",
- "whatIfCountry": "Země/oblast",
- "whatIfCountryInfo": "Země/oblast, ze které se uživatel přihlašuje.",
- "whatIfDevicePlatformInfo": "Platforma zařízení, ze které se uživatel přihlašuje",
- "whatIfEnterIpAddress": "Zadat IP adresu (např.: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "Zadaná adresa IP je neplatná.",
- "whatIfIpAddress": "IP adresa",
- "whatIfIpAddressInfo": "IP adresa, ze které se uživatel přihlašuje",
- "whatIfIpCountryInfoBoxText": "Pokud používáte IP adresu nebo zemi/oblast, budou se vyžadovat obě pole, která by si měla vzájemně odpovídat.",
- "whatIfSelectCountry": "Vyberte zemi nebo oblast…",
- "whatIfSelectDevicePlatform": "Vybrat platformu zařízení...",
- "whatIfSelectPrivateLink": "Vyberte Private Link...",
- "whatIfSelectSignInRisk": "Vyberte riziko přihlášení...",
- "whatIfSignInRisk": "Riziko přihlášení",
- "whatIfSignInRiskInfo": "Úroveň rizika přidružená k přihlášení",
- "whatIfUnknownAreas": "Neznámé oblasti",
- "windows365InfoBox": "Výběr Windows 365 bude mít vliv na připojení k počítačům Cloud PC a hostitelům relací Azure Virtual Desktopu. Další informace získáte, když kliknete sem.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Identity úloh (Preview)",
- "workloadIdentitiesLicenseText": "K úpravám těchto zásad se vyžaduje licence P1 nebo P2 k identitám úloh úrovně Premium.",
- "workloadIdentity": "Identita úlohy"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Nepodporováno",
- "supportEnding": "Konec podpory",
- "supported": "Podporováno"
- }
- },
- "SecurityTemplate": {
- "aSR": "Omezení možností útoku",
- "accountProtection": "Ochrana účtu",
- "allDevices": "Všechna zařízení",
- "antivirus": "Antivirus",
- "antivirusReporting": "Vytváření sestav antiviru (Preview)",
- "conditionalAccess": "Podmíněný přístup",
- "deviceCompliance": "Dodržování předpisů zařízením",
- "diskEncryption": "Šifrování disku",
- "eDR": "Zjišťování koncových bodů a odpověď",
- "ePM": "Správa oprávnění koncového bodu",
- "firewall": "Firewall",
- "helpSupport": "Nápověda a podpora",
- "setup": "Instalace",
- "wdapt": "Microsoft Defender pro koncový bod"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Selhalo",
- "hardReboot": "Úplné restartování",
- "retry": "Opakovat",
- "softReboot": "Rychlé restartování",
- "success": "Úspěch"
- },
- "Columns": {
- "codeType": "Typ kódu",
- "returnCode": "Návratový kód"
- },
- "bladeTitle": "Návratové kódy",
- "gridAriaLabel": "Návratové kódy",
- "header": "Zadejte návratové kódy, které určí chování po instalaci:",
- "onAddAnnounceMessage": "Návratový kód přidal položku {0} z {1}",
- "onDeleteSuccess": "Návratový kód {0} byl úspěšně odstraněn",
- "returnCodeAlreadyUsedValidation": "Návratový kód se už používá.",
- "returnCodeMustBeIntegerValidation": "Návratový kód by měl být celé číslo.",
- "returnCodeShouldBeAtLeast": "Návratový kód by měl být nejméně {0}.",
- "returnCodeShouldBeAtMost": "Návratový kód by měl být nejvíce {0}.",
- "selectorLabel": "Návratové kódy"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabština",
- "bulgarian": "Bulharština",
- "chineseSimplified": "Čínština (zjednodušená)",
- "chineseTraditional": "Čínština (tradiční)",
- "croatian": "Chorvatština",
- "czech": "Čeština",
- "danish": "Dánština",
- "dutch": "Holandština",
- "englishUK": "Angličtina (Spojené království)",
- "englishUS": "Angličtina (Spojené státy)",
- "estonian": "Estonština",
- "finnish": "Finština",
- "frenchCanada": "Francouzština (Kanada)",
- "frenchFrance": "Francouzština (Francie)",
- "german": "Němčina",
- "greek": "Řečtina",
- "hebrew": "Hebrejština",
- "hungarian": "Maďarština",
- "italian": "Italština",
- "japanese": "Japonština",
- "korean": "Korejština",
- "latvian": "Lotyština",
- "lithuanian": "Litevština",
- "norwegian": "Norština (Bokmål)",
- "polish": "Polština",
- "portugueseBrazil": "Portugalština (Brazílie)",
- "portuguesePortugal": "Portugalština (Portugalsko)",
- "romanian": "Rumunština",
- "russian": "Ruština",
- "serbian": "Srbština",
- "slovak": "Slovenština",
- "slovenian": "Slovinština",
- "spanishMexico": "Španělština (Mexiko)",
- "spanishSpain": "Španělština (Španělsko)",
- "swedish": "Švédština",
- "thai": "Thajsko",
- "turkish": "Turečtina",
- "ukrainian": "Ukrajinština"
- },
- "Summary": {
- "placeholder": "Vlevo vyberte oznámení a zobrazíte náhled obsahu."
- },
- "companyContact": "Zobrazit kontaktní informace",
- "companyLogo": "Zobrazit logo společnosti",
- "companyName": "Zobrazit název společnosti",
- "createEditDescription": "Vytvořte nebo upravte šablony oznámení.",
- "createMessage": "Vytvořit zprávu",
- "deviceDetails": "Zobrazit podrobnosti o zařízení",
- "deviceDetailsInfoBox": "Toto nastavení je ve výchozím nastavení vypnuté, protože načtení podrobností o zařízení může způsobit zpoždění příjmu e-mailových oznámení.",
- "editImpactInfo": "Úprava této šablony oznámení bude mít vliv na všechny zásady, které tuto šablonu používají.",
- "editMessage": "Upravit zprávu",
- "email": "e-mail",
- "emailFooterTitle": "Zápatí e-mailu",
- "emailHeaderFooterInfo": "Nastavení záhlaví a zápatí e-mailu pro e-mailová oznámení závisí na nastavení přizpůsobení v uzlu správce tenanta ve Správci koncových bodů.",
- "emailHeaderTitle": "Záhlaví e-mailu",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Konfigurovat nastavení přizpůsobení",
- "formSubTitle": "Vytvořit nebo upravit e-maily s oznámením",
- "headerFooterSettingsTab": "Nastavení záhlaví a zápatí",
- "imgPreview": "Náhled obrázku",
- "infotext": "Vyberte oznámení. Pokud chcete vytvořit nové oznámení, přejděte do Oznámení v části Správa v úloze Nastavit dodržování předpisů zařízením.",
- "iwLink": "Zobrazit odkaz na web portálu společnosti",
- "listEmpty": "Žádné šablony zpráv",
- "listEmptySelectOnly": "Žádné šablony zpráv. Pokud chcete vytvořit nové oznámení, přejděte prosím na Oznámení v části Spravovat úlohy Nastavit dodržování předpisů zařízením.",
- "listSubTitle": "Seznam šablon oznámení",
- "listTitle": "Šablony oznámení",
- "localizedNotificationMessageTemplates": "Lokalizované šablony oznámení",
- "messageAssigned": "Tuto šablonu zpráv nejde odstranit, protože ji v tuto chvíli používají nejméně jedny zásady dodržování předpisů.",
- "messageCapitalized": "Šablona zprávy oznámení",
- "messageLowercase": "šablona zprávy oznámení",
- "missingDefaultError": "Vybrat šablonu",
- "notificationMessageTemplates": "Šablony oznámení",
- "rowValidationError": "Vyžaduje se nejméně jedna šablona zprávy.",
- "selectDescription": "Vyberte oznámení. Pokud chcete vytvořit nové oznámení, přejděte do Oznámení v části Spravovat v úloze Nastavit dodržování předpisů zařízením.",
- "tenantValueText": "Hodnota tenanta",
- "testEmailLabel": "Odeslat náhled e-mailu",
- "localeLabel": "Národní prostředí",
- "isDefaultLocale": "Je výchozí"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Počet dní čekání před vynucením restartování"
- },
"Description": {
"label": "Popis"
},
+ "FeatureDeploymentSettings": {
+ "header": "Nastavení nasazení funkcí"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Tato funkce nemůže downgradovat zařízení.",
+ "label": "Aktualizace funkcí, která se má nasadit"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Dostupnost poslední skupiny"
+ },
+ "GradualRolloutInterval": {
+ "label": "Počet dní mezi skupinami"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Dostupnost první skupiny"
+ },
"Name": {
"label": "Název"
},
- "QualityUpdateRelease": {
- "label": "Urychleně zpracovat instalaci aktualizací pro zvýšení kvality, pokud je verze operačního systému zařízení nižší než:"
- },
- "bladeTitle": "Aktualizace pro zvýšení kvality pro systém Windows 10 a novější (Preview)",
- "loadError": "Načítání selhalo."
+ "OptionalUpdate": {
+ "label": "Požadovaná nebo volitelná aktualizace"
+ },
+ "RolloutOptions": {
+ "label": "Možnosti uvedení"
+ },
+ "RolloutSettings": {
+ "header": "Kdy chcete aktualizaci zpřístupnit ve službě Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Nakonfigurujte značky oboru pro tyto zásady."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "První dostupné datum"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Zakázáno",
+ "enabled": "Povoleno",
+ "infoBalloonContent": "Určete, jestli se mají instalovat nejnovější aktualizace funkcí Windows 10 na zařízení, která nemají nárok na Windows 11.",
+ "label": "Pokud zařízení není oprávněné používat Windows 11, nainstalujte nejnovější aktualizaci funkcí Windows 10",
+ "notApplicable": "Není k dispozici",
+ "summaryLabel": "Instalace Windows 10 na zařízeních, která nejsou oprávněná používat Windows 11"
+ },
+ "bladeTitle": "Nasazení aktualizací funkcí",
+ "deploymentSettingsTitle": "Nastavení nasazení",
+ "loadError": "Načítání nebylo úspěšné!",
+ "windows11EULA": "Pokud vyberete pro nasazení tuto aktualizaci funkcí, vyjadřujete souhlas s tím, že při použití tohoto operačního systému na zařízení buď (1) byla v multilicenčním programu zakoupena platná licence Windows, nebo (2) jste oprávněný zástupce organizace s pravomocí přijímat jejím jménem příslušné licenční podmínky pro software společnosti Microsoft. Tyto podmínky najdete tady {0}."
},
+ "Notifications": {
+ "deploymentSaved": "Nasazení {0} se uložilo.",
+ "newFeatureUpdateDeploymentCreated": "Vytvořilo se nové nasazení aktualizace funkcí."
+ },
"TabName": {
- "qualityUpdateSettings": "Nastavení"
+ "deploymentSettings": "Nastavení nasazení",
+ "groupAssignmentSettings": "Přiřazení",
+ "scopeSettings": "Značky oboru"
},
- "infoBoxText": "Jediným vyhrazeným ovládacím prvkem aktualizace pro zvýšení kvality, který je kromě stávající zásady aktualizačního okruhu pro systém Windows 10 a novější aktuálně k dispozici, je možnost urychleně zpracovat aktualizace pro zvýšení kvality na zařízeních, která překračují zadanou úroveň opravy. Další ovládací prvky budou k dispozici v budoucnu.",
- "licenseLearnMoreText": "Přečtěte si další informace o požadavcích a zásadách aktualizace pro zvýšení kvality.",
- "licenseWarningBoxText": "Vytváření zásad aktualizace pro zvýšení kvality vyžaduje konkrétní licencování.",
- "warningBoxText": "I když urychlené zpracování aktualizací softwaru můžete zkrátit čas na to, aby se v případě potřeby dosáhlo shody s předpisy, má větší dopad na produktivitu koncového uživatele. Výrazně se zvýší pravděpodobnost, že během pracovní doby dojde k restartování."
+ "gradualRolloutLicenseWarning": "Tato funkce vyžaduje konkrétní licencování.",
+ "gradualRolloutLicenseWarningEdit": "Tato funkce se může dál používat a konfigurovat, dokud se zásady neuloží bez výběru této funkce.",
+ "licenseLearnMoreText": "Přečtěte si další informace o požadavcích a zásadách aktualizace funkcí.",
+ "optionalUpdateWarning": "Možnost Volitelné je dostupná jenom pro aktualizace systému Windows 11.",
+ "profileNameWarning": "Název musí být kratší než 64 znaků.",
+ "specificLicensingRequired": "Některé vybrané funkce vyžadují konkrétní licencování."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64 bitů",
- "thirtyTwoBit": "32 bitů"
- },
- "TACSettings": {
- "edgeSettings": "Nastavení konfigurace Edge",
- "edgeWindowsDataProtectionSettings": "Nastavení ochrany dat Edge (Windows) – Preview",
- "edgeWindowsSettings": "Nastavení konfigurace Edge (Windows) – Preview",
- "generalAppConfig": "Obecná konfigurace aplikace",
- "generalSettings": "Obecná nastavení konfigurace",
- "outlookSMIMEConfig": "Nastavení standardu S/MIME v Outlooku",
- "outlookSettings": "Nastavení konfigurace Outlooku",
- "sMIME": "Standard S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Přidat ohraničení sítě",
- "addNetworkBoundaryButton": "Přidat ohraničení sítě...",
- "allowWindowsSearch": "Povolit ve Windows Search hledání šifrovaných podnikových dat a aplikací ze Storu",
- "authoritativeIpRanges": "Seznam rozsahů podnikových IP adres je autoritativní (nedetekovat automaticky)",
- "authoritativeProxyServers": "Seznam podnikových proxy serverů je autoritativní (nedetekovat automaticky)",
- "boundaryType": "Typ ohraničení",
- "cloudResources": "Cloudové prostředky",
- "corporateIdentity": "Podniková identita",
- "dataRecoveryCert": "Pokud chcete povolit obnovování šifrovaných dat, odešlete certifikát agenta obnovování dat (DRA).",
- "editNetworkBoundary": "Upravit ohraničení sítě",
- "enrollmentState": "Stav registrace",
- "iPv4Ranges": "Rozsahy IPv4",
- "iPv6Ranges": "Rozsahy IPv6",
- "internalProxyServers": "Interní proxy servery",
- "maxInactivityTime": "Maximální doba (v minutách), po kterou může zařízení zůstat neaktivní, než se zamkne PIN kódem nebo heslem",
- "maxPasswordAttempts": "Počet povolených neúspěšných přihlášení, než se zařízení vymaže",
- "mdmDiscoveryUrl": "Adresa URL zjišťování MDM",
- "mdmRequiredSettingsInfo": "Tyto zásady platí jenom pro Windows 10 Anniversary Edition a vyšší. Ochranu nastavují pomocí Windows Information Protection (WIP).",
- "minimumPinLength": "Nastavte minimální počet znaků vyžadovaných pro PIN kód.",
- "name": "Název",
- "networkBoundariesGridEmptyText": "Tady se budou zobrazovat všechna ohraničení sítě, která přidáte.",
- "networkBoundary": "Ohraničení sítě",
- "networkDomainNames": "Síťové domény",
- "neutralResources": "Neutrální prostředky",
- "passportForWork": "Používat Windows Hello pro firmy jako metodu přihlašování do Windows",
- "pinExpiration": "Zadejte dobu (ve dnech), po kterou se PIN kód může používat, než bude systém vyžadovat, aby ho uživatel změnil.",
- "pinHistory": "Zadejte počet předchozích PIN kódů přidružených k uživatelskému účtu, které se nedají použít znovu.",
- "pinLowercaseLetters": "Nakonfigurujte využití malých písmen v PIN kódu Windows Hello pro firmy.",
- "pinSpecialCharacters": "Nakonfigurujte využití speciálních znaků v PIN kódu Windows Hello pro firmy.",
- "pinUppercaseLetters": "Nakonfigurujte využití velkých písmen v PIN kódu Windows Hello pro firmy.",
- "protectUnderLock": "Bránit aplikacím v přístupu k podnikovým datům, pokud je zařízení uzamčené. Platí jenom pro Windows 10 Mobile.",
- "protectedDomainNames": "Chráněné domény",
- "proxyServers": "Proxy servery",
- "requireAppPin": "Zakázat PIN kód aplikace, když je PIN kód zařízení spravovaný",
- "requiredSettings": "Požadovaná nastavení",
- "requiredSettingsInfo": "Když se změní obor nebo se odeberou tyto zásady, dešifrují se firemní data.",
- "revokeOnMdmHandoff": "Odvolat přístup k chráněným datům, když se zařízení zaregistruje k MDM",
- "revokeOnUnenroll": "Odvolat šifrovací klíče při zrušení registrace",
- "rmsTemplateForEdp": "Zadejte ID šablony, která se má použít pro Azure RMS.",
- "showWipIcon": "Zobrazit ikonu ochrany podnikových dat",
- "type": "Typ",
- "useRmsForWip": "Použít Azure RMS pro WIP",
- "value": "Hodnota",
- "weRequiredSettingsInfo": "Tyto zásady platí jenom pro Windows 10 Creators Update a vyšší. Ochranu nastavují pomocí Windows Information Protection (WIP) a Windows MAM.",
- "wipProtectionMode": "Režim Windows Information Protection",
- "withEnrollment": "S registrací",
- "withoutEnrollment": "Bez registrace"
+ "Platform": {
+ "all": "Vše",
+ "android": "Správce zařízení s Androidem",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Společné",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS a Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Neznámé",
+ "unsupported": "Nepodporováno",
+ "windows": "Windows",
+ "windows10": "Windows 10 a novější",
+ "windows10CM": "Windows 10 a novější (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 a novější",
+ "windows8And10": "Windows 8 a 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 a novější",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 a Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 a novější (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Počítač s Windows"
+ },
+ "InstallIntent": {
+ "available": "K dispozici zaregistrovaným zařízením",
+ "availableWithoutEnrollment": "K dispozici s registrací i bez ní",
+ "required": "Povinné",
+ "uninstall": "Odinstalovat"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filtr",
+ "noFilters": "Žádné"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Autor",
- "template": "Název šablony"
- },
- "Row": {
- "ariaLabel": "{0} řádek z {1} sloupec {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Začněte od začátku a vyberte požadované vlastnosti z knihovny dostupných vlastností inventáře."
- },
- "SettingsCatalog": {
- "subtitle": "Začněte od začátku a vyberte požadovaná nastavení z knihovny dostupných nastavení",
- "title": "Katalog nastavení"
- },
- "Templates": {
- "subtitle": "Šablony obsahují skupiny nastavení uspořádané podle funkcí. Pokud nechcete zásady sestavovat ručně nebo chcete zařízení nakonfigurovat pro přístup k firemním sítím, třeba při konfiguraci Wi-Fi nebo VPN, použijte šablonu.",
- "title": "Šablony"
- },
- "noData": "Nepovedlo se najít žádné šablony zásad"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop Client",
- "visioProRetail": "Visio Online Plan 2"
- },
- "Countries": {
- "ae": "Spojené arabské emiráty",
- "ag": "Antigua a Barbuda",
- "ai": "Anguilla",
- "al": "Albánie",
- "am": "Arménie",
- "ao": "Angola",
- "ar": "Argentina",
- "at": "Rakousko",
- "au": "Austrálie",
- "az": "Ázerbájdžán",
- "bb": "Barbados",
- "be": "Belgie",
- "bf": "Burkina Faso",
- "bg": "Bulharsko",
- "bh": "Bahrajn",
- "bj": "Benin",
- "bm": "Bermudy",
- "bn": "Brunej",
- "bo": "Bolívie",
- "br": "Brazílie",
- "bs": "Bahamy",
- "bt": "Bhútán",
- "bw": "Botswana",
- "by": "Bělorusko",
- "bz": "Belize",
- "ca": "Kanada",
- "cg": "Konžská republika",
- "ch": "Švýcarsko",
- "cl": "Chile",
- "cn": "Čína",
- "co": "Kolumbie",
- "cr": "Kostarika",
- "cv": "Cabo Verde",
- "cy": "Kypr",
- "cz": "Česká republika",
- "de": "Německo",
- "dk": "Dánsko",
- "dm": "Dominika",
- "do": "Dominikánská republika",
- "dz": "Alžírsko",
- "ec": "Ekvádor",
- "ee": "Estonsko",
- "eg": "Egypt",
- "es": "Španělsko",
- "fi": "Finsko",
- "fj": "Fidži",
- "fm": "Federativní státy Mikronésie",
- "fr": "Francie",
- "gb": "Spojené království",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambie",
- "gr": "Řecko",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hongkong",
- "hn": "Honduras",
- "hr": "Chorvatsko",
- "hu": "Maďarsko",
- "id": "Indonésie",
- "ie": "Irsko",
- "il": "Izrael",
- "in": "Indie",
- "is": "Island",
- "it": "Itálie",
- "jm": "Jamajka",
- "jo": "Jordánsko",
- "jp": "Japonsko",
- "ke": "Keňa",
- "kg": "Kyrgyzstán",
- "kh": "Kambodža",
- "kn": "Svatý Kryštof a Nevis",
- "kr": "Korejská republika",
- "kw": "Kuvajt",
- "ky": "Kajmanské ostrovy",
- "kz": "Kazachstán",
- "la": "Laoská lidově demokratická republika",
- "lb": "Libanon",
- "lc": "Svatá Lucie",
- "lk": "Srí Lanka",
- "lr": "Libérie",
- "lt": "Litva",
- "lu": "Lucembursko",
- "lv": "Lotyšsko",
- "md": "Moldavská republika",
- "mg": "Madagaskar",
- "mk": "Severní Makedonie",
- "ml": "Mali",
- "mn": "Mongolsko",
- "mo": "Macao",
- "mr": "Mauritánie",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauricius",
- "mw": "Malawi",
- "mx": "Mexiko",
- "my": "Malajsie",
- "mz": "Mosambik",
- "na": "Namibie",
- "ne": "Niger",
- "ng": "Nigérie",
- "ni": "Nikaragua",
- "nl": "Nizozemsko",
- "no": "Norsko",
- "np": "Nepál",
- "nz": "Nový Zéland",
- "om": "Omán",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua-Nová Guinea",
- "ph": "Filipíny",
- "pk": "Pákistán",
- "pl": "Polsko",
- "pt": "Portugalsko",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Katar",
- "ro": "Rumunsko",
- "ru": "Rusko",
- "sa": "Saúdská Arábie",
- "sb": "Šalamounovy ostrovy",
- "sc": "Seychely",
- "se": "Švédsko",
- "sg": "Singapur",
- "si": "Slovinsko",
- "sk": "Slovensko",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Surinam",
- "st": "Svatý Tomáš a Princův ostrov",
- "sv": "Salvador",
- "sz": "Svazijsko",
- "tc": "Turks a Caicos",
- "td": "Čad",
- "th": "Thajsko",
- "tj": "Tádžikistán",
- "tm": "Turkmenistán",
- "tn": "Tunisko",
- "tr": "Turecko",
- "tt": "Trinidad a Tobago",
- "tw": "Tchaj-wan",
- "tz": "Tanzanie",
- "ua": "Ukrajina",
- "ug": "Uganda",
- "us": "USA",
- "uy": "Uruguay",
- "uz": "Uzbekistán",
- "vc": "Svatý Vincenc a Grenadiny",
- "ve": "Venezuela",
- "vg": "Britské Panenské ostrovy",
- "vn": "Vietnam",
- "ye": "Jemen",
- "za": "Jihoafrická republika",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Aktuální kanál",
- "deferred": "Půlroční podnikový kanál",
- "firstReleaseCurrent": "Aktuální kanál (Preview)",
- "firstReleaseDeferred": "Půlroční podnikový kanál (Preview)",
- "monthlyEnterprise": "Měsíční podnikový kanál",
- "placeHolder": "Vyberte jednu možnost."
- },
- "AppProtection": {
- "allAppTypes": "Cílit na všechny typy aplikací",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Aplikace v pracovním profilu Androidu",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Aplikace na vyhrazených zařízeních s Androidem Enterprise se sdíleným režimem Microsoft Entra",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
- "appsOnAndroidOpenSourceProjectUserless": "Aplikace v Android Open Source Project Userless",
- "appsOnIntuneManagedDevices": "Aplikace na spravovaných zařízeních Intune",
- "appsOnUnmanagedDevices": "Aplikace na nespravovaných zařízeních",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Není dostupné",
- "windows10PlatformLabel": "Windows 10 a novější",
- "withEnrollment": "S registrací",
- "withoutEnrollment": "Bez registrace"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Předdefinovaná role",
- "customCloudPCRole": "Vlastní role Windows 365",
- "customIntuneRole": "Vlastní role Intune",
- "customRole": "Vlastní role"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "Profil {0} je zahrnutý v jedné nebo více sadách zásad. Pokud profil {0} odstraníte, nebudete už jej moct přiřazovat prostřednictvím těchto sad zásad. Chcete jej přesto odstranit?",
- "contentWithError": "{0} by mohla být zahrnutá v jedné nebo více sadách zásad. Pokud {0} odstraníte, nebudete už ji moct přiřazovat prostřednictvím těchto sad zásad. Chcete ji přesto odstranit?",
- "header": "Opravdu chcete odstranit toto omezení?"
- },
- "DeviceLimit": {
- "description": "Zadejte maximální počet zařízení, která uživatel může zaregistrovat.",
- "header": "Omezení limitů počtů zařízení",
- "info": "Definujte, kolik zařízení může každý uživatel zaregistrovat."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Musí být 1.0 nebo vyšší.",
- "android": "Zadejte platné číslo verze. Příklady: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Zadejte platné číslo verze. Příklady: 5.0, 5.1.1",
- "iOS": "Zadejte platné číslo verze. Příklady: 9.0, 10.0, 9.0.2",
- "mac": "Zadejte platné číslo verze. Příklady: 10, 10.10, 10.10.1",
- "min": "Minimum nemůže být menší než {0}.",
- "minMax": "Minimální verze nemůže být větší než maximální verze.",
- "windows": "Musí být 10.0 nebo vyšší. Pokud chcete povolit zařízení 8.1, nechejte pole prázdné.",
- "windowsMobile": "Musí být 10.0 nebo vyšší. Pokud chcete povolit zařízení 8.1, nechejte pole prázdné."
- },
- "allPlatformsBlocked": "Všechny platformy zařízení jsou zablokované. Pokud chcete povolit konfiguraci platforem, povolte jejich registraci.",
- "blockManufacturerPlaceHolder": "Název výrobce",
- "blockManufacturersHeader": "Zablokovaní výrobci",
- "cannotRestrict": "Omezení se nepodporují.",
- "configurationDescription": "Zadejte omezení konfigurace platformy, která se musí splnit, aby se zařízení zaregistrovalo. Po registraci můžete zařízení omezovat pomocí zásad dodržování předpisů. Verze definujte jako hlavníverze.podverze.build. Omezení verzí platí jenom pro zařízení registrovaná na Portálu společnosti. Intune standardně klasifikuje zařízení jako v osobním vlastnictví. Pokud se zařízení mají klasifikovat jako ve vlastnictví firmy, je nutná další akce.",
- "configurationDescriptionLabel": "Další informace o nastavení omezení registrace",
- "configurations": "Konfigurovat platformy",
- "deviceManufacturer": "Výrobce zařízení",
- "header": "Omezení typů zařízení",
- "info": "Definujte, které platformy, verze a typy správy se můžou registrovat.",
- "manufacturer": "Výrobce",
- "max": "Maximum",
- "maxVersion": "Maximální verze",
- "min": "Minimum",
- "minVersion": "Minimální verze",
- "newPlatforms": "Povolili jste nové platformy. Zvažte možnost aktualizovat konfigurace platforem.",
- "personal": "V osobním vlastnictví",
- "platform": "Platforma",
- "platformDescription": "Registraci můžete povolit pro následující platformy. Blokujte jenom ty platformy, které nebudete podporovat. Povolené platformy se dají konfigurovat prostřednictvím dalších omezení registrace.",
- "platformSettings": "Nastavení platformy",
- "platforms": "Vyberte platformy.",
- "platformsSelected": "Počet vybraných platforem: {0}",
- "type": "Typ",
- "versions": "verze",
- "versionsRange": "Povolit rozsah min/max:",
- "windowsTooltip": "Omezí registrace prostřednictvím správy mobilních zařízení. Neomezí instalaci agentů počítačů. Podporují se jen verze Windows 10 a Windows 11. Pokud chcete povolit Windows 8.1, nechejte verze prázdné."
- },
- "Priority": {
- "saved": "Priority omezení se úspěšně uložily."
- },
- "Row": {
- "announce": "Priorita: {0}, název: {1}, přiřazené: {2}"
- },
- "Table": {
- "deployed": "Nasazeno",
- "name": "Název",
- "priority": "Priorita"
- },
- "Type": {
- "limit": "Omezení limitu počtu zařízení",
- "type": "Omezení typu zařízení"
- },
- "allUsers": "Všichni uživatelé",
- "androidRestrictions": "Omezení pro Android",
- "create": "Vytvořit omezení",
- "defaultLimitDescription": "Toto je výchozí omezení limitu počtu zařízení, které se s nejnižší prioritou používá pro všechny uživatele bez ohledu na členství ve skupině.",
- "defaultTypeDescription": "Toto je výchozí omezení typu zařízení, které se s nejnižší prioritou používá pro všechny uživatele bez ohledu na členství ve skupině.",
- "defaultWhfbDescription": "Toto je výchozí konfigurace Windows Hello pro firmy, která se s nejnižší prioritou používá pro všechny uživatele bez ohledu na členství ve skupině.",
- "deleteMessage": "Ovlivnění uživatelé se omezí dalším přiřazeným omezením s nejvyšší prioritou. Pokud nejsou přiřazená žádná další omezení, použije se výchozí omezení.",
- "deleteTitle": "Opravdu chcete odstranit omezení {0}?",
- "descriptionHint": "Krátký odstavec s popisem využití v organizaci nebo úrovně omezení charakterizované nastavením omezení",
- "edit": "Upravit omezení",
- "info": "Zařízení musí dodržovat omezení registrace s nejvyšší prioritou, která se přiřadila jeho uživateli. Pokud chcete změnit prioritu omezení zařízení, můžete omezení přetáhnout. Výchozí omezení mají pro všechny uživatele nejnižší prioritu a spravují registrace bez uživatelů. Dají se upravit, ale ne odstranit.",
- "iosRestrictions": "Omezení pro iOS",
- "mDM": "MDM",
- "macRestrictions": "Omezení pro macOS",
- "maxVersion": "Maximální verze",
- "minVersion": "Minimální verze",
- "nameHint": "Toto bude primární atribut viditelný při identifikaci sady omezení.",
- "noAssignmentsStatusBar": "Přiřaďte omezení k aspoň jedné skupině. Klikněte na Vlastnosti.",
- "nonAdminForbiddenCreateError": "Abyste mohli vytvářet, upravovat nebo odstraňovat omezení, musíte být správcem služby Intune nebo globálním správcem.",
- "nonAdminForbiddenEdit": "Abyste mohli upravovat omezení, musíte být správce.",
- "notFound": "Omezení se nenašlo. Možná už se odstranilo.",
- "personallyOwned": "Zařízení v osobním vlastnictví",
- "restriction": "Omezení",
- "restrictionLowerCase": "omezení",
- "restrictionType": "Typ omezení",
- "selectType": "Vyberte typ omezení.",
- "selectValidation": "Vyberte prosím platformu.",
- "typeHint": "Pokud chcete omezit vlastnosti zařízení, zvolte Omezení typu zařízení. Pokud chcete omezit počet zařízení na jednoho uživatele, zvolte Omezení limitu počtu zařízení.",
- "typeRequired": "Typ omezení je povinný.",
- "winPhoneRestrictions": "Omezení pro Windows Phone",
- "windowsECv1Info": "Starší omezení registrace se nedají upravit ani se u nich nedá změnit priorita, dají se jenom odstranit.",
- "windowsECv2Info": "Omezení registrace můžete upřednostnit přetažením. Níže si můžete zobrazit výchozí a předkonfigurovaná omezení. Všechna nová omezení registrace budou mít vyšší prioritu než výchozí a předkonfigurovaná omezení.",
- "windowsRestrictions": "Omezení pro Windows",
- "windowsRestrictionsPreview": "Omezení Windows založená na filtru (Preview)"
- },
- "InstallContextType": {
- "device": "Zařízení",
- "deviceContext": "Kontext zařízení",
- "user": "Uživatel",
- "userContext": "Kontext uživatele"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Popis",
- "placeholder": "Zadejte popis"
- },
- "NameTextBox": {
- "label": "Název",
- "placeholder": "Zadat název"
- },
- "PublisherTextBox": {
- "label": "Vydavatel",
- "placeholder": "Zadat vydavatele"
- },
- "VersionTextBox": {
- "label": "Verze"
- },
- "headerDescription": "Vytvořte nový vlastní balíček skriptu ze skriptů detekce a nápravy, které jste napsali."
- },
- "ScopeTags": {
- "headerDescription": "Vyberte jednu nebo více skupin pro přiřazení balíčku skriptu."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Skript detekce",
- "placeholder": "Text vstupního skriptu",
- "requiredValidationMessage": "Zadejte skript detekce"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Vynutit kontrolu podpisu skriptu"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Spustit tento skript pomocí přihlašovacích údajů přihlášeného uživatele"
- },
- "RemediationScript": {
- "infoBox": "Tento skript se spustí v režimu jenom pro detekci, protože není k dispozici žádný skript nápravy."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Nápravný skript",
- "placeholder": "Text vstupního skriptu"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Spustit skript v 64bitovém PowerShellu"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Neplatný skript. Nejméně jeden znak použitý ve skriptu není platný."
- },
- "headerDescription": "Vytvořte vlastní balíček skriptu ze skriptů, které jste napsali. Ve výchozím nastavení se skripty spustí na přiřazených zařízeních každý den.",
- "infoBox": "Tento skript je jen pro čtení. Některá nastavení tohoto skriptu můžou být zakázaná."
- },
- "title": "Vytvořit vlastní skript",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Interval",
- "time": "Datum a čas"
- },
- "Interval": {
- "day": "Opakuje se každý den",
- "days": "Opakuje se vždy po {0} dnech",
- "hour": "Opakuje se každou hodinu",
- "hours": "Opakuje se vždy po {0} hodinách",
- "month": "Opakuje se každý měsíc",
- "months": "Opakuje se vždy po {0} měsících",
- "week": "Opakuje se každý týden",
- "weeks": "Opakuje se vždy po {0} týdnech"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) dne {1}",
- "withDate": "{0} dne {1}"
- }
- }
- },
- "Edit": {
- "title": "Upravit – {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Povolené adresy URL",
- "tooltip": "Zadejte weby, ke kterým mají uživatele přístup v pracovním kontextu. Žádné jiné weby se nepovolí. Můžete si zvolit, že nakonfigurujete buď seznam povolených webů, nebo zakázaných, ale ne oba. "
- },
- "ApplicationProxyRedirection": {
- "header": "Proxy aplikací",
- "title": "Přesměrování proxy aplikací",
- "tooltip": "Povolí přesměrování proxy aplikací, aby uživatelé měli přístup k firemním odkazům a místním webovým aplikacím."
- },
- "BlockedURLs": {
- "title": "Blokované adresy URL",
- "tooltip": "Zadejte weby, které mají uživatele v pracovním kontextu zablokované. Všechny ostatní weby se povolí. Můžete si zvolit, že nakonfigurujete buď seznam povolených webů, nebo zakázaných, ale ne oba. "
- },
- "Bookmarks": {
- "header": "Spravované záložky",
- "tooltip": "Zadejte seznam adres URL uložených mezi záložky, které vaši uživatelé budou mít k dispozici, když ve svém pracovním kontextu budou používat Microsoft Edge.",
- "uRL": "Adresa URL"
- },
- "HomepageURL": {
- "header": "Spravovaná domovská stránka",
- "title": "Adresa URL zástupce domovské stránky",
- "tooltip": "Nakonfigurujte zástupce domovské stránky, který se uživatelům zobrazí jako první ikona pod panelem hledání, až v Microsoft Edgi otevřou novou záložku."
- },
- "PersonalContext": {
- "label": "Přesměrovat servery s omezeným přístupem na osobní kontext",
- "tooltip": "Nakonfigurujte, jestli uživatelé můžou přecházet na osobní kontext, aby mohli otevřít omezené weby."
- }
- },
- "BooleanActions": {
- "allow": "Povolit",
- "block": "Blokovat",
- "configured": "Nakonfigurováno",
- "disable": "Zakázat",
- "dontRequire": "Nevyžadovat",
- "enable": "Povolit",
- "hide": "Skrýt",
- "limit": "Limit",
- "notConfigured": "Nenakonfigurováno",
- "require": "Vyžadovat",
- "show": "Zobrazit",
- "yes": "Ano"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Zpřístupnit uživatelům jako volitelnou aktualizaci",
- "optionalValue": "Volitelné",
- "required": "Zpřístupnit uživatelům jako povinnou aktualizaci",
- "requiredValue": "Povinné"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 den",
- "twoDays": "2 dny",
- "zeroDays": "0 dnů"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Přehled"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Hledat podle zařízení, uživatele nebo verze aktualizace pro zvýšení kvality"
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Nepovedlo se načíst profily aktualizace softwaru iOS"
- }
- },
- "SummaryBlade": {
- "subtitle": "Profil aktualizace iOS",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profil"
- },
- "listLoadError": "Profily aktualizace softwaru iOS se nedají načíst. Zkuste to znovu později.",
- "lowercase": "Zásady aktualizace iOS",
- "uppercase": "Zásady aktualizace iOS"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Je nám líto, ale nepovedlo se nám spojit s Applem a načíst seznam verzí k dispozici. Zkuste to znovu později nebo pokračujte s nejnovější verzí.",
- "latestUpdate": "Nejnovější aktualizace",
- "noLongerSupported": "Vybraná verze se už nepodporuje",
- "olderVersionSelected": "Protože jste vybrali starší verzi, ujistěte se, jestli použijete zásady omezení zařízení, které pozdrží viditelnost aktualizací softwaru, aby se zařízení neaktualizovala na nejnovější verzi.",
- "prefix": "Instalovat iOS/iPadOS",
- "selectSupported": "Vybrat verzi aktualizace podporovanou společností Apple",
- "updateToInstall": "Aktualizace k instalaci"
- },
- "Schedule": {
- "always": "Aktualizovat při dalším ohlášení",
- "duringTimeWindows": "Aktualizovat v naplánovaný čas",
- "header": "Když se k zařízení přiřadí zásady aktualizace, Intune ve výchozím nastavení nasadí nejnovější aktualizace ve chvíli, kdy se zařízení ohlásí. Místo toho můžete vytvořit týdenní plán s vlastními počátečními a koncovými časy. Pokud se rozhodnete, že aktualizace budou probíhat mimo naplánovaný čas, Intune nebude aktualizace nasazovat, dokud naplánovaný čas neskončí.",
- "infoBalloon": "Kdy dojde k aktualizacím. Pro plánování aktualizací během plánované doby nebo mimo ni je povinný další vstup.",
- "label": "Typ plánu",
- "outsideActiveHours": "Aktualizovat mimo dobu aktivního používání (starší verze)",
- "outsideTimeWindows": "Aktualizovat mimo naplánovaný čas",
- "timeWindow": "Časové okno",
- "timeZone": "Časové pásmo",
- "title": "Aktualizovat nastavení plánu zásad:",
- "weekly": "Týdenní plán",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "Verze iOS/iPadOS, která se má v čase aktualizace na zařízení nainstalovat.",
- "label": "Vybrat verzi k instalaci"
- },
- "header": "Pokud chcete vynutit, aby přiřazená zařízení automaticky nainstalovala nejnovější aktualizace pro iOS/iPadOS, vytvořte profil. Tato nastavení určují, jak a kdy se budou aktualizace softwaru nasazovat. Tento profil nezabrání uživatelům v ruční aktualizaci operačního systému. Tomu jde až na 90 dní bránit pomocí zásad omezení konfigurace zařízení. Aktualizace se nainstalují jen na zařízení pod dohledem.",
- "notAvailable": "Není k dispozici"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Nejsou k dispozici žádné zásady aktualizace iOSu, které by se daly zobrazit.",
- "macOsUpdates": "Nejsou k dispozici žádné zásady aktualizace softwaru pro macOS, které by se daly zobrazit.",
- "windowsUpdates": "Nejsou k dispozici žádné aktualizační okruhy pro Windows 10 a novější, které by bylo možné zobrazit."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Název zařízení",
- "deviceUpdateStatus": "Stav aktualizace zařízení",
- "lastUpdated": "Poslední aktualizace",
- "osVersion": "Verze OS",
- "userPrincipalName": "Uživatelské jméno"
- },
- "maximumOSVersionFilter": "Maximální verze OS",
- "minimumOSVersionFilter": "Minimální verze OS",
- "noData": "Neexistují žádná data, která by bylo možné zobrazit.",
- "searchBoxPlaceholder": "Hledat podle názvu zařízení, uživatelského jména nebo verze operačního systému",
- "title": "Souhrn účtu pro zařízení s macOSem"
- },
- "Category": {
- "configurationDataFile": "Soubor s daty konfigurace",
- "critical": "Kritický",
- "firmware": "Firmware",
- "other": "Ostatní"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Poslední aktualizace",
- "successfulUpdateCount": "Počet nasazených úspěšných aktualizací",
- "totalUpdateCount": "Celkový počet nasazených aktualizací",
- "updateCategory": "Kategorie aktualizací",
- "updateCategoryStatus": "Stav kategorie aktualizací"
- },
- "noData": "Neexistují žádná data, která by bylo možné zobrazit."
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Nepovedlo se načíst profily aktualizace softwaru macOS"
- }
- },
- "State": {
- "available": "K dispozici",
- "commandFailed": "Chyba příkazu",
- "downloadFailed": "Neúspěšné stahování",
- "downloadInsufficientNetwork": "Stahování – nedostatečná síť",
- "downloadInsufficientPower": "Stahování – nedostatek energie",
- "downloadInsufficientSpace": "Stahování – nedostatek místa",
- "downloaded": "Staženo",
- "downloading": "Stahování",
- "idle": "Nečinný",
- "installFailed": "Instalace se nezdařila",
- "installInsufficientPower": "Instalace – nedostatek energie",
- "installInsufficientSpace": "Instalace – nedostatek místa",
- "installing": "Probíhá instalace.",
- "scheduled": "Naplánováno",
- "success": "Úspěch",
- "unknown": "Neznámý"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Poslední aktualizace",
- "updateName": "Název aktualizace",
- "updateStatus": "Aktualizovat stav",
- "version": "Verze"
- },
- "noData": "Neexistují žádná data, která by bylo možné zobrazit.",
- "searchBoxPlaceholder": "Hledat podle názvu nebo verze aktualizace"
- },
- "SummaryBlade": {
- "subtitle": "Profil aktualizace macOS",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profil"
- },
- "error": "Chyba",
- "errorOrErrors": "Chyby",
- "errors": "Chyby",
- "listLoadError": "Profily aktualizace softwaru macOS se nedají načíst. Zkuste to znovu později.",
- "lowercase": "Zásady aktualizace macOS",
- "other": "Ostatní",
- "subtitle": "Aktualizace softwaru pro macOS",
- "upToDate": "Aktuální",
- "uppercase": "Zásady aktualizace macOS"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Zkuste to prosím znovu později",
- "title": "Nepovedlo se odstranit {0}."
- },
- "LoadAllConfigurationFailed": {
- "description": "Zkuste to prosím znovu později"
- },
- "LoadConfigurationFailed": {
- "description": "Zkuste to prosím znovu později",
- "title": "Nepodařilo se načíst {0}"
- },
- "idWrongFormat": "Poskytnuté ID profilu není v očekávaném formátu."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "Musí být vybrané aspoň jedno časové okno",
- "tooMany": "Jde nakonfigurovat maximálně 20 časových oken"
- }
- },
- "endDay": "Den ukončení",
- "endTime": "Koncový čas",
- "startDay": "Den začátku",
- "startTime": "Počáteční čas",
- "timeWindowError": "Vyberte časový interval, který zahrnuje alespoň jednu hodinu."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Nepovedlo se načíst profily aktualizačního okruhu pro Windows 10 a novější."
- }
- },
- "SummaryBlade": {
- "subtitle": "Aktualizační okruh pro Windows 10 a novější",
- "title": "Windows Update pro firmy"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 a novější",
- "title": "Aktualizační okruh pro Windows 10 a novější"
- },
- "listLoadError": "Nepovedlo se načíst profily aktualizačního okruhu pro Windows 10 a novější. Zkuste to znovu později.",
- "lowercase": "Aktualizační kanál",
- "uppercase": "Aktualizační kanál"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Aktualizovat nastavení zásad",
- "updateRingSettings": "Nastavení aktualizačního okruhu"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Vytvořit {0}",
- "edit": "Upravit {0}"
- }
- },
- "notScannedYet": "Zatím nekontrolováno",
- "outOfDateIosDevices": "Zastaralá zařízení s iOSem"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Omezení zařízení (vlastník zařízení)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "Zásady aktualizace iOS"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Je rovno",
+ "greaterThan": "Větší než",
+ "greaterThanOrEqualTo": "Větší než nebo rovno",
+ "lessThan": "Menší než",
+ "lessThanOrEqualTo": "Menší než nebo rovno",
+ "notEqualTo": "Není rovno"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Vynutit kontrolu podpisu skriptu a tiše spustit skript",
+ "enforceSignatureCheckTooltip": "Pokud chcete ověřit, že skript je podepsaný důvěryhodným vydavatelem, který umožní skriptu běžet bez toho, aby se zobrazovaly výzvy nebo upozornění, vyberte Ano. Skript se spustí neblokovaný. Pokud chcete skript spustit s potvrzením koncového uživatele bez ověření podpisu, vyberte Ne (výchozí).",
+ "header": "Použít vlastní skript zjišťování",
+ "runAs32Bit": "Na 64bitových klientech spouštět skript jako 32bitový proces",
+ "runAs32BitTooltip": "Pokud chcete na 64bitových klientech spouštět skript jako 32bitový proces, vyberte Ano. Pokud ho na těchto klientech chcete spouštět jako 64bitový proces, vyberte Ne (výchozí). 32bitoví klienti budou skript spouštět jako 32bitový proces.",
+ "scriptContent": "Obsah skriptu",
+ "scriptFile": "Soubor skriptu",
+ "scriptFileNotSelectedValidation": "Nevybral se žádný soubor skriptu.",
+ "scriptFileTooltip": "Vyberte powershellový skript, který zjistí přítomnost aplikace v klientovi. Aplikace se bude považovat za zjištěnou, když skript vrátí ukončovací kód s hodnotou 0 a zapíše řetězcovou hodnotu na STDOUT.",
+ "scriptSizeLimitValidation": "Váš skript detekce překračuje maximální povolenou velikost. Vyřešte to zmenšením velikost vašeho skriptu detekce."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Datum vytvoření",
+ "dateModified": "Datum změny",
+ "doesNotExist": "Soubor nebo složka neexistuje.",
+ "fileOrFolderExists": "Soubor nebo složka existuje.",
+ "sizeInMB": "Velikost v MB",
+ "version": "Řetězec (verze)"
+ },
+ "associatedWith32Bit": "Přidruženo k 32bitové aplikaci na 64bitových klientech",
+ "associatedWith32BitTooltip": "Pokud chcete na 64bitových klientech rozbalit proměnné prostředí cest v 32bitovém kontextu, vyberte Ano. Pokud chcete na těchto klientech rozbalit všechny proměnné cest v 64bitovém kontextu, vyberte Ne (výchozí). 32bitoví klienti budou vždy používat 32bitový kontext.",
+ "detectionMethod": "Metoda zjišťování",
+ "detectionMethodTooltip": "Vyberte typ metody zjišťování, která se používá k ověření přítomnosti aplikace",
+ "fileOrFolder": "Soubor nebo složka",
+ "fileOrFolderToolTip": "Soubor nebo složka, které se mají zjistit",
+ "operator": "Operátor",
+ "operatorTooltip": "Vyberte operátor, pomocí kterého metoda zjišťování ověří porovnání.",
+ "path": "Cesta",
+ "pathTooltip": "Úplná cesta složky, která obsahuje soubor nebo složku, které se mají zjistit",
+ "value": "Hodnota",
+ "valueTooltip": "Vyberte hodnotu, která odpovídá vybrané metodě zjišťování. Metody zjišťování na základě data by se měly zadat v místním čase."
+ },
+ "GridColumns": {
+ "pathOrCode": "Cesta/kód",
+ "type": "Typ"
+ },
+ "MsiRule": {
+ "operator": "Operátor",
+ "operatorTooltip": "Vyberte operátor pro porovnání ověření verze produktu Instalační služby MSI.",
+ "productCode": "Kód produktu Instalační služby MSI",
+ "productCodeTooltip": "Platný kód produktu Instalační služby MSI pro aplikaci",
+ "productVersion": "Hodnota",
+ "productVersionCheck": "Kontrola verze produktu Instalační služby MSI",
+ "productVersionCheckTooltip": "Pokud chcete kromě kódu produktu Instalační služby MSI ověřit i verzi tohoto produktu, vyberte Ano.",
+ "productVersionTooltip": "Zadejte verzi produktu Instalační služby MSI pro aplikaci."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Porovnání celých čísel",
+ "keyDoesNotExist": "Klíč neexistuje.",
+ "keyExists": "Klíč existuje.",
+ "stringComparison": "Porovnání řetězců",
+ "valueDoesNotExist": "Hodnota neexistuje.",
+ "valueExists": "Hodnota existuje.",
+ "versionComparison": "Porovnání verzí"
+ },
+ "associatedWith32Bit": "Přidruženo k 32bitové aplikaci na 64bitových klientech",
+ "associatedWith32BitTooltip": "Pokud chcete na 64bitových klientech prohledávat 32bitový registr, vyberte Ano. Pokud na těchto klientech chcete prohledávat 64bitový registr, vyberte Ne (výchozí). 32bitoví klienti budou vždy prohledávat 32bitový registr.",
+ "detectionMethod": "Metoda zjišťování",
+ "detectionMethodTooltip": "Vyberte typ metody zjišťování, která se používá k ověření přítomnosti aplikace",
+ "keyPath": "Cesta ke klíči",
+ "keyPathTooltip": "Úplná cesta položky registru, která obsahuje hodnotu, která se má zjistit",
+ "operator": "Operátor",
+ "operatorTooltip": "Vyberte operátor, pomocí kterého metoda zjišťování ověří porovnání.",
+ "value": "Hodnota",
+ "valueName": "Název hodnoty",
+ "valueNameTooltip": "Název hodnoty registru, která se má zjistit",
+ "valueTooltip": "Vyberte hodnotu, která odpovídá vybrané metodě zjišťování."
+ },
+ "RuleTypeOptions": {
+ "file": "Soubor",
+ "mSI": "Instalační služba MSI",
+ "registry": "Registr"
+ },
+ "gridAriaLabel": "Pravidla zjišťování",
+ "header": "Vytvořte pravidlo, které indikuje přítomnost aplikace.",
+ "noRulesSelectedPlaceholder": "Nezadala se žádná pravidla.",
+ "ruleTableLimit": "Můžete přidat až 25 pravidel detekce",
+ "ruleType": "Typ pravidla",
+ "ruleTypeTooltip": "Zvolte typ pravidla zjišťování, které se má přidat."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Použít vlastní skript zjišťování",
+ "manual": "Ručně nakonfigurovat pravidla zjišťování"
+ },
+ "bladeTitle": "Pravidla detekce",
+ "header": "Nakonfigurovat pravidla pro konkrétní aplikaci, pomocí kterých se zjistí přítomnost aplikace",
+ "rulesFormat": "Formát pravidel",
+ "rulesFormatTooltip": "Zvolte buď ruční konfiguraci pravidel zjišťování, nebo použijte vlastní skript, který zjistí přítomnost aplikace.",
+ "selectorLabel": "Pravidla detekce"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Přijmout licenční podmínky pro software Microsoft jménem uživatelů",
"appSuiteConfigurationLabel": "Konfigurace sady aplikací",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "Vybrané jazyky: {0}",
"xmlConfigurationLabel": "Konfigurace souboru XML"
},
- "Filters": {
- "ruleSyntax": "Syntaxe pravidel",
- "filters": "Filtry"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Povolit uživateli měnit nastavení",
- "tooltip": "Určuje, jestli uživatel může měnit nastavení."
- },
- "AllowWorkAccounts": {
- "title": "Povolit pouze pracovní nebo školní účty",
- "tooltip": " Když povolíte toto nastavení, uživatelé si nebudou moci do Outlooku přidat osobní e-mailový účet a účet úložiště. Pokud má uživatel v Outlooku přidaný osobní účet, zobrazí se mu výzva k jeho odebrání. Pokud uživatel osobní účet neodebere, nebude možné přidat pracovní nebo školní účet."
- },
- "BlockExternalImages": {
- "title": "Blokovat externí obrázky",
- "tooltip": "Pokud je povoleno blokování externích obrázků, aplikace zabrání stahovat obrázky hostované na internetu, které jsou vložené do textu zprávy. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Vypnuto."
- },
- "ConfigureEmail": {
- "title": "Konfigurovat nastavení e-mailového účtu"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Výchozí podpis aplikace označuje, jestli aplikace použije jako výchozí podpis při vytváření zprávy text Získat Outlook pro Android. Pokud se nastavení nakonfiguruje na Vypnuto, výchozí podpis se nebude používat. Uživatelé ale můžou přidat svůj vlastní.\r\n\r\nKdyž se možnost nastaví na Nenakonfigurováno, výchozí nastavení aplikace se nastaví na Zapnuto.",
- "iOS": "Výchozí podpis aplikace označuje, jestli aplikace použije jako výchozí podpis při vytváření zprávy text Získat Outlook pro iOS. Pokud se nastavení nakonfiguruje na Vypnuto, výchozí podpis se nebude používat. Uživatelé ale můžou přidat svůj vlastní.\r\n\r\nKdyž se možnost nastaví na Nenakonfigurováno, výchozí nastavení aplikace se nastaví na Zapnuto."
- },
- "title": "Výchozí podpis aplikace"
- },
- "OfficeFeedReplies": {
- "title": "Informační kanál Discover",
- "tooltip": "Informační kanál Discover nabízí informace o nejčastěji používaných souborech Office. Standardně se tento kanál povoluje ve chvíli, kdy se pro daného uživatele povoluje Delve. Když se tato možnost nastaví jako nenakonfigurovaná, výchozí nastavení aplikace je Zapnuto."
- },
- "OrganizeMailByThread": {
- "title": "Uspořádat poštu podle vlákna",
- "tooltip": "Výchozím chováním v Outlooku je seskupit poštovní konverzace do zobrazení konverzace ve vláknech. Pokud se toto nastavení zakáže, Outlook zobrazí každou poštu samostatně a nebude ji seskupovat podle vlákna."
- },
- "PlayMyEmails": {
- "title": "Přehrát moje e-maily",
- "tooltip": "Funkce Přehrát moje e-maily není v aplikaci povolená ve výchozím nastavení, oprávněným uživatelům se ale nabízí prostřednictvím banneru v doručené poště. Když se tato funkce nastaví na hodnotu Vypnuto, nebude se v aplikaci oprávněným uživatelům nabízet. I tak si uživatelé můžou v aplikaci přehrávání e-mailů povolit ručně. Pokud je nastavená jako Není nakonfigurováno, je výchozí nastavení aplikace Zapnuto a funkce se bude oprávněným uživatelům nabízet."
- },
- "SuggestedReplies": {
- "title": "Navrhované odpovědi",
- "tooltip": "Když otevřete zprávu, Outlook pod ní může navrhnout odpovědi. Pokud vyberete nějakou navrhovanou odpověď, můžete ji před odesláním upravit."
- },
- "SyncCalendars": {
- "title": "Synchronizovat kalendáře",
- "tooltip": "Umožňuje nakonfigurovat, jestli uživatelé můžou synchronizovat svůj kalendář Outlooku s nativní aplikací a databází kalendáře."
- },
- "TextPredictions": {
- "title": "Predikce textu",
- "tooltip": "Aplikace Outlook může při psaní zpráv navrhovat slova a fráze. Když Outlook nabídne návrh, přijměte ho potáhnutím prstem. Když se nenakonfiguruje, bude ve výchozím nastavení aplikace nastavené na Zapnuté."
- },
- "ThemesEnabled": {
- "title": "Motivy jsou povolené",
- "tooltip": "Určete, jestli může uživatel používat vlastní vizuální motiv."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "Zařízení ChromeOS"
- },
- "ManagedDesktop": {
- "adminContacts": "Kontakty správce",
- "appPackaging": "Balení aplikace",
- "autopatchGroups": "Skupiny automatických oprav",
- "devices": "Zařízení",
- "featureEnablement": "Aktivace funkce",
- "feedback": "Zpětná vazba",
- "gettingStarted": "Začínáme",
- "messages": "Zprávy",
- "onlineResources": "Prostředky online",
- "policyHealth": "Stav zásad",
- "policyHealthPreview": "Stav zásad (Preview)",
- "releaseManagement": "Správa verzí",
- "serviceRequests": "Žádosti o služby",
- "settings": "Nastavení",
- "supportRequests": "Žádosti o podporu",
- "tenantEnrollment": "Registrace tenanta",
- "tenantManagement": "Správa tenanta"
- },
- "actions": "Akce při nedodržení předpisů",
- "advancedExchangeSettings": "Nastavení Exchange Online",
- "advancedThreatProtection": "Microsoft Defender pro koncový bod",
- "allApps": "Všechny aplikace",
- "allDevices": "Všechna zařízení",
- "androidFotaDeployments": "Nasazení Android FOTA",
- "appBundles": "Sady prostředků aplikace",
- "appCategories": "Kategorie aplikací",
- "appConfigPolicies": "Zásady konfigurace aplikací",
- "appConfigurationStatus": "Stav konfigurace aplikace",
- "appInstallStatus": "Stav instalace aplikace",
- "appLicences": "Licence aplikací",
- "appProtectionPolicies": "Zásady ochrany aplikací",
- "appProtectionStatus": "Stav ochrany aplikace",
- "appSelectiveWipe": "Selektivní vymazání aplikace",
- "appleVppTokens": "Tokeny Apple VPP",
- "apps": "Aplikace",
- "assign": "Přiřazení",
- "assignedPermissions": "Přiřazená oprávnění",
- "assignedRoles": "Přiřazené role",
- "autopilotDeploymentReport": "Nasazení Autopilot (Preview)",
- "autopilotDeploymentReportV2": "Nasazení Autopilota 2.0 (Preview)",
- "brandingAndCustomization": "Přizpůsobení",
- "cartProfiles": "Profily košíků",
- "certificateConnectors": "Konektory certifikátů",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Zařízení připojená cloudem (Preview)",
- "cloudPcActions": "Akce cloudového počítače Cloud PC (Preview)",
- "cloudPcMaintenanceWindows": "Časová období údržby Cloud PC (Preview)",
- "compliancePolicies": "Zásady dodržování předpisů",
- "complianceScriptManagement": "Skripty",
- "complianceScriptManagementPreview": "Skripty (Preview)",
- "complianceSettings": "Nastavení zásad dodržování předpisů",
- "conditionStatements": "Příkazy podmínek",
- "conditions": "Umístění",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Konfigurační profily",
- "configurationScripts": "Konfigurační skripty",
- "connectorsAndTokens": "Konektory a tokeny",
- "corporateDeviceIdentifiers": "Identifikátory podnikových zařízení",
- "customAttributes": "Vlastní atributy",
- "customNotifications": "Vlastní oznámení",
- "deploymentSettings": "Nastavení nasazení",
- "derivedCredentials": "Odvozené přihlašovací údaje",
- "deviceActions": "Akce zařízení",
- "deviceCategories": "Kategorie zařízení",
- "deviceCleanUp": "Pravidla čištění zařízení",
- "deviceEnrollmentManagers": "Správci registrace zařízení",
- "deviceExecutionStatus": "Stav zařízení",
- "deviceLimitEnrollmentRestrictions": "Omezení limitu zařízení pro registraci",
- "deviceTypeEnrollmentRestrictions": "Omezení platformy zařízení pro registraci",
- "devices": "Zařízení",
- "discoveredApps": "Zjištěné aplikace",
- "edgePolicies": "Zásady pro Microsoft Edge",
- "embeddedSIM": "Mobilní profily eSIM (Preview)",
- "enrollDevices": "Registrovat zařízení",
- "enrollmentFailures": "Neúspěšné registrace",
- "enrollmentNotifications": "Oznámení o registraci (Preview)",
- "enrollmentRestrictions": "Omezení registrace",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Konektory služby Exchange",
- "failuresForCumulativeQualityUpdates": "Selhání kumulativní aktualizace pro zvýšení kvality pro Windows",
- "failuresForDriverUpdates": "Selhání aktualizace ovladače systému Windows",
- "failuresForFeatureUpdates": "Chyby aktualizace funkcí",
- "failuresForQualityUpdates": "Selhání urychlené aktualizace systému Windows",
- "featureFlighting": "Publikování testovacích verzí funkcí",
- "featureUpdateDeployments": "Aktualizace funkcí pro Windows 10 a novější",
- "flighting": "Publikování testovacích verzí",
- "fotaUpdate": "Aktualizace FOTA",
- "groupPolicy": "Šablony pro správu",
- "groupPolicyAnalytics": "Analýza zásad skupiny",
- "helpSupport": "Nápověda a podpora",
- "helpSupportReplacement": "Nápověda a podpora ({0})",
- "iOSAppProvisioning": "Zřizovací profily aplikací pro iOS",
- "incompleteUserEnrollments": "Nedokončené registrace uživatele",
- "iosUpdates": "Aktualizovat zásady pro iOS/iPadOS",
- "legacyPcManagement": "Starší verze správy počítače",
- "macOSSoftwareUpdate": "Zásady aktualizace pro macOS",
- "macOSSoftwareUpdateAccountSummaries": "Stav instalace pro zařízení s macOSem",
- "macOSSoftwareUpdateCategorySummaries": "Souhrn aktualizací softwaru",
- "macOSSoftwareUpdateStateSummaries": "aktualizace",
- "managedGooglePlay": "Spravovaný obchod Google Play",
- "msfb": "Microsoft Store pro firmy",
- "myPermissions": "Moje oprávnění",
- "notifications": "Oznámení",
- "officeApps": "Aplikace Office",
- "officeProPlusPolicies": "Zásady pro aplikace Office",
- "onPremise": "Místní",
- "onPremisesConnector": "Exchange ActiveSync On-premises Connector",
- "onPremisesDeviceAccess": "Zařízení Exchange ActiveSync",
- "onPremisesManageAccess": "Přístup k místnímu Exchangi",
- "outOfDateIosDevices": "Chyby instalace pro zařízení s iOSem",
- "overview": "Přehled",
- "partnerDeviceManagement": "Správa partnerského zařízení",
- "perUpdateRingDeploymentState": "Stav nasazení podle kruhu aktualizace",
- "permissions": "Oprávnění",
- "platformApps": "Počet aplikací: {0}",
- "platformDevices": "Zařízení {0}",
- "platformEnrollment": "Registrace {0}",
- "policies": "Zásady",
- "profiles": "Profily",
- "properties": "Vlastnosti",
- "reports": "Sestavy",
- "retireNoncompliantDevices": "Vyřadit zařízení nesplňující požadavky",
- "retireNoncompliantDevicesPreview": "Vyřazení zařízení nesplňujících požadavky (Preview)",
- "role": "Role",
- "scriptManagement": "Skripty",
- "securityBaselines": "Standardní hodnoty zabezpečení",
- "serviceToServiceConnector": "Konektor Exchange Online",
- "servicenowConnector": "Konektor ServiceNow",
- "shellScripts": "Skripty prostředí",
- "teamViewerConnector": "Konektor pro TeamViewer",
- "telecomeExpenseManagement": "Služba TEM (Telecom Expense Management)",
- "tenantAdmin": "Správce tenanta",
- "tenantAdministration": "Správa tenanta",
- "termsAndConditions": "Podmínky a ujednání",
- "titles": "Názvy",
- "troubleshoot": "Odstranit potíže",
- "troubleshootSupport": "Řešení problémů a podpora",
- "user": "Uživatel",
- "userExecutionStatus": "Stav uživatele",
- "wdacSupplementalPolicies": "Doplňkové zásady režimu S",
- "win32CatalogUpdateApp": "Aktualizace pro aplikace správy podnikových aplikací",
- "win32CatalogUpdateAppInPreview": "Aktualizace pro katalogové aplikace pro Windows (Win32) (Preview)",
- "windows10DriverUpdate": "Aktualizace ovladačů pro systém Windows 10 a novější",
- "windows10QualityUpdate": "Aktualizace kvality pro Windows 10 a novější",
- "windows10UpdateRings": "Aktualizační okruhy pro Windows 10 a novější",
- "windows10XPolicyFailures": "Selhání zásad Windows 10X",
- "windows365PartnerConnector": "Partnerské konektory pro Windows 365",
- "windowsDiagnosticData": "Data Windows",
- "windowsEnterpriseCertificate": "Certifikát Windows Enterprise",
- "windowsManagement": "Skripty",
- "windowsSideLoadingKeys": "Klíče pro instalaci bokem ve Windows",
- "windowsSymantecCertificate": "Certifikát Windows DigiCert",
- "windowsThreatReport": "Stav agenta hrozeb"
- },
- "ScopeTypes": {
- "allDevices": "Všechna zařízení",
- "allUsers": "Všichni uživatelé",
- "allUsersAndDevices": "Všichni uživatelé a všechna zařízení",
- "selectedGroups": "Vybrané skupiny"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search jako výchozí",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype pro firmy",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone a iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Nepodporováno",
+ "supportEnding": "Konec podpory",
+ "supported": "Podporováno"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Výchozí",
- "header": "Priorita aktualizace",
- "postponed": "Odloženo",
- "priority": "Vysoká priorita"
- },
- "AutoUpdateSupersededApps": {
- "label": "Automatická aktualizace",
- "sublabel": "Pokud uživatel nainstaloval nahrazené aplikace z Portálu společnosti, musí se nainstalovat nahrazující aplikace."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Pozadí",
- "displayText": "Stahování obsahu v {0}",
- "foreground": "Popředí",
- "header": "Priorita optimalizace doručení"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Umožnit uživateli odložit oznámení o restartování",
- "countdownDialog": "Vyberte, jak dlouho před restartováním se má zobrazit dialogové okno odpočtu do restartování (minuty).",
- "durationInMinutes": "Období odkladu restartování zařízení (minuty)",
- "snoozeDurationInMinutes": "Vyberte délku odkladu (minuty)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Časové pásmo",
- "local": "Časové pásmo zařízení",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Datum a čas",
- "deadlineTimeColumnLabel": "Konečný termín instalace",
- "deadlineTimeDatePickerErrorMessage": "Vybrané datum musí nastat později než datum k dispozici",
- "deadlineTimeLabel": "Konečný termín instalace aplikace",
- "defaultTime": "Co nejdříve",
- "infoText": "Pokud neurčíte čas dostupnosti níže, bude tato aplikace k dispozici ihned po nasazení. Pokud se jedná o požadovanou aplikaci, můžete zadat konečný termín instalace.",
- "specificTime": "Určité datum a čas",
- "startTimeColumnLabel": "Dostupnost",
- "startTimeDatePickerErrorMessage": "Vybrané datum musí nastat před datem konečného termínu",
- "startTimeLabel": "Dostupnost aplikace"
- },
- "restartGracePeriodHeader": "Období odkladu restartování",
- "restartGracePeriodLabel": "Období odkladu restartování zařízení",
- "summaryTitle": "Činnost koncového uživatele"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "Soubor nebo složka jako vybraný požadavek",
- "pathToolTip": "Úplná cesta souboru nebo složky, které se mají zjistit",
- "property": "Vlastnost",
- "valueToolTip": "Vyberte hodnotu požadavku, která odpovídá vybrané metodě zjišťování. Metody zjišťování na základě data a času by se měly zadat v místním formátu."
- },
- "GridColumns": {
- "pathOrScript": "Cesta/skript",
- "type": "Typ"
- },
- "Registry": {
- "keyPath": "Cesta ke klíči",
- "keyPathTooltip": "Úplná cesta položky registru, která obsahuje hodnotu jako požadavek",
- "operator": "Operátor",
- "operatorTooltip": "Vyberte operátor pro porovnání.",
- "registryRequirement": "Požadavek klíče registru",
- "registryRequirementTooltip": "Vyberte porovnání požadavků klíčů registrů.",
- "valueName": "Název hodnoty",
- "valueNameTooltip": "Název požadované hodnoty registru"
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Automaticky schvalovat všechny doporučené aktualizace ovladačů",
+ "manual": "Ručně schvalovat a nasazovat aktualizace ovladačů"
+ },
+ "BulkActions": {
+ "button": "Hromadné akce"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Metoda schválení:"
},
- "RequirementTypeOptions": {
- "fileType": "Soubor",
- "registry": "Registr",
- "script": "Skript"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Logická hodnota",
- "dateTime": "Datum a čas",
- "float": "Plovoucí desetinná čárka",
- "integer": "Celé číslo",
- "string": "Řetězec",
- "version": "Verze"
- },
- "duplicateName": "Název skriptu {0} se už používá. Zadejte prosím jiný název.",
- "enforceSignatureCheck": "Vynutit kontrolu podpisu skriptu",
- "enforceSignatureCheckTooltip": "Pokud chcete ověřit, že skript je podepsaný důvěryhodným vydavatelem, který umožní skriptu běžet bez toho, aby se zobrazovaly výzvy nebo upozornění, vyberte Ano. Skript se spustí neblokovaný. Pokud chcete skript spustit s potvrzením koncového uživatele, ale bez ověření podpisu, vyberte Ne (výchozí).",
- "loggedOnCredentials": "Spustit tento skript pomocí přihlašovacích údajů přihlášeného uživatele",
- "loggedOnCredentialsTooltip": "Spustit skript pomocí přihlašovacích údajů přihlášeného zařízení",
- "operatorTooltip": "Vyberte operátor pro porovnání požadavků.",
- "requirementMethod": "Vyberte typ výstupních dat.",
- "requirementMethodTooltip": "Vyberte datový typ, který se použije při určování požadavku na shodu zjišťování.",
- "scriptContent": "Obsah skriptu",
- "scriptFile": "Soubor skriptu",
- "scriptFileTooltip": "Vyberte powershellový skript, který zjistí přítomnost aplikace v klientovi. Když se aplikace zjistí, proces požadavku poskytne ukončovací kód s hodnotou 0 a zapíše řetězcovou hodnotu na STDOUT.",
- "scriptName": "Název skriptu",
- "value": "Hodnota",
- "valueTooltip": "Vyberte hodnotu požadavku, která odpovídá vybrané metodě zjišťování. Metody zjišťování na základě data a času by se měly zadat v místním formátu."
+ "DeploymentDeferralInDays": {
+ "label": "Zpřístupnit aktualizace po",
+ "units": "(d)",
+ "value": "Počet dní: {0}"
+ },
+ "DriverAction": {
+ "header": "Vyberte akci níže.",
+ "label": "Akce ovladače",
+ "placeholder": "Vyberte akci"
},
- "bladeTitle": "Přidat pravidlo požadavku",
- "createRequirementHeader": "Vytvořit požadavek",
- "header": "Nakonfigurovat další pravidla požadavků",
- "label": "Pravidla dalších požadavků",
- "noRequirementsSelectedPlaceholder": "Nezadaly se žádné požadavky.",
- "requirementType": "Typ požadavku",
- "requirementTypeTooltip": "Zvolte typ metody zjišťování, pomocí které se určí, jak se požadavek bude ověřovat."
- },
- "architectures": "Architektura operačního systému",
- "architecturesTooltip": "Zvolte architektury potřebné k nainstalování aplikace",
- "bladeTitle": "Požadavky",
- "diskSpace": "Požadované místo na disku (MB)",
- "diskSpaceTooltip": "Požadované volné místo na systémové jednotce, aby se aplikace mohla nainstalovat",
- "header": "Zadejte požadavky, které zařízení musí splnit, než se aplikace nainstaluje:",
- "maximumTextFieldValue": "Hodnota musí být maximálně {0}.",
- "minimumCpuSpeed": "Minimální požadovaná rychlost CPU (MHz)",
- "minimumCpuSpeedTooltip": "Minimální požadovaná rychlost CPU, aby se aplikace mohla nainstalovat",
- "minimumLogicalProcessors": "Minimální požadovaný počet logických procesorů",
- "minimumLogicalProcessorsTooltip": "Minimální požadovaný počet logických procesorů, aby se aplikace mohla nainstalovat",
- "minimumOperatingSystem": "Minimální operační systém",
- "minimumOperatingSystemTooltip": "Vyberte minimální operační systém potřebný k instalaci aplikace.",
- "minumumTextFieldValue": "Hodnota musí být aspoň {0}.",
- "physicalMemory": "Požadovaná fyzická paměť (MB)",
- "physicalMemoryTooltip": "Požadovaná fyzická paměť (RAM), aby se aplikace mohla nainstalovat",
- "selectorLabel": "Požadavky",
- "validNumber": "Zadejte platné číslo."
- },
- "PolicySet": {
- "appManagement": "Správa aplikací",
- "assignments": "Přiřazení",
- "basics": "Základy",
- "deviceEnrollment": "Registrace zařízení",
- "deviceManagement": "Správa zařízení",
- "scopeTags": "Značky oboru",
- "appConfigurationTitle": "Zásady konfigurace aplikací",
- "appProtectionTitle": "Zásady ochrany aplikací",
- "appTitle": "Aplikace",
- "iOSAppProvisioningTitle": "Zřizovací profily aplikací pro iOS",
- "deviceLimitRestrictionTitle": "Omezení limitů počtů zařízení",
- "deviceTypeRestrictionTitle": "Omezení typů zařízení",
- "enrollmentStatusSettingTitle": "Stránky stavu registrace",
- "windowsAutopilotDeploymentProfileTitle": "Profily nasazení Windows Autopilot",
- "deviceComplianceTitle": "Zásady dodržování předpisů zařízením",
- "deviceConfigurationTitle": "Profily konfigurace zařízení",
- "powershellScriptTitle": "Powershellové skripty"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Zahrnuté ovladače"
+ },
+ "SelectDrivers": {
+ "header": "Vyberte ovladače, které chcete zahrnout do hromadné akce."
+ },
+ "SelectDriversToInclude": {
+ "button": "Vybrat ovladače, které se mají zahrnout"
+ },
+ "SelectLessDrivers": {
+ "validation": "Je možné vybrat maximálně sto ovladačů."
+ },
+ "SelectMoreDrivers": {
+ "validation": "Měl by být vybrán alespoň jeden ovladač."
+ },
+ "SelectedDrivers": {
+ "label": "Vybrané ovladače"
+ },
+ "availabilityDate": "Zpřístupnit v službě Windows Update",
+ "bladeTitle": "Aktualizace ovladačů pro systém Windows 10 a novější (Preview)",
+ "lastSync": "Poslední synchronizace:",
+ "lastSyncDefaultText": "Čeká se na shromažďování počátečního inventáře.",
+ "loadError": "Načítání selhalo."
+ },
+ "DriverStatus": {
+ "approved": "Schváleno",
+ "declined": "Odmítnuto",
+ "export": "Exportování doporučených ovladačů",
+ "needsReview": "Vyžaduje kontrolu",
+ "paused": "Pozastaveno"
+ },
+ "DriversToReview": {
+ "text": "{0} ke kontrole"
+ },
+ "Subtitle": {
+ "automatic": "Zásady automatického schvalování aktualizace ovladačů",
+ "manual": "Zásady ručního schvalování aktualizace ovladačů"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Doporučené",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrajn",
- "countryNameZA": "Jihoafrická republika",
- "countryNameJO": "Jordánsko",
- "countryNameSD": "Súdán",
- "countryNameNU": "Niue",
- "countryNameCZ": "Česká republika",
- "countryNameLT": "Litva",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ekvádor",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Lichtenštejnsko",
- "countryNameHK": "Hongkong – zvláštní administrativní oblast",
- "countryNameGH": "Ghana",
- "countryNameSA": "Saúdská Arábie",
- "countryNamePG": "Papua-Nová Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "Indie",
- "countryNameHN": "Honduras",
- "countryNameRO": "Rumunsko",
- "countryNameKZ": "Kazachstán",
- "countryNameLC": "Svatá Lucie",
- "countryNameGE": "Gruzie",
- "countryNameTT": "Trinidad a Tobago",
- "countryNameMP": "Severní Mariany",
- "countryNameMV": "Maledivy",
- "countryNameFI": "Finsko",
- "countryNameNO": "Norsko",
- "countryNameEE": "Estonsko",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Uzbekistán",
- "countryNameME": "Černá Hora",
- "countryNameTJ": "Tádžikistán",
- "countryNameAW": "Aruba",
- "countryNameFR": "Francie",
- "countryNameOM": "Omán",
- "countryNameAO": "Angola",
- "countryNameIT": "Itálie",
- "countryNameAZ": "Ázerbájdžán",
- "countryNameKG": "Kyrgyzstán",
- "countryNameWF": "Wallis a Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falklandy (Malvíny)",
- "countryNameGY": "Guyana",
- "countryNameSS": "Jižní Súdán",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Sýrie",
- "countryNameMD": "Moldavsko",
- "countryNameVC": "Svatý Vincenc a Grenadiny",
- "countryNameID": "Indonésie",
- "countryNameRE": "Réunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "Severní Makedonie",
- "countryNameTG": "Togo",
- "countryNamePF": "Francouzská Polynésie",
- "countryNameKY": "Kajmanské ostrovy",
- "countryNameIO": "Britské indickooceánské území",
- "countryNameRU": "Rusko",
- "countryNameMA": "Maroko",
- "countryNameAU": "Austrálie",
- "countryNameBO": "Bolívie",
- "countryNameVA": "Svatý stolec (Vatikán)",
- "countryNameVG": "Britské Panenské ostrovy",
- "countryNameFM": "Mikronésie",
- "countryNameAQ": "Antarktida",
- "countryNameZM": "Zambie",
- "countryNameBR": "Brazílie",
- "countryNameIS": "Island",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulharsko",
- "countryNamePR": "Portoriko",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamy",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macao – zvláštní administrativní oblast",
- "countryNameRW": "Rwanda",
- "countryNameAS": "Americká Samoa",
- "countryNameBQ": "Bonaire, Svatý Eustach a Saba",
- "countryNameMF": "Svatý Martin (Francie)",
- "countryNameTM": "Turkmenistán",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "Nová Kaledonie",
- "countryNameAC": "Ascensión",
- "countryNameBN": "Brunej",
- "countryNameBD": "Bangladéš",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambie",
- "countryNameGA": "Gabon",
- "countryNameCA": "Kanada",
- "countryNameSH": "Svatá Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolsko",
- "countryNamePA": "Panama",
- "countryNameCM": "Kamerun",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japonsko",
- "countryNameCY": "Kypr",
- "countryNameCD": "Konžská demokratická republika",
- "countryNameTN": "Tunisko",
- "countryNameTR": "Turecko",
- "countryNameWS": "Samoa",
- "countryNameSE": "Švédsko",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Kambodža",
- "countryNamePL": "Polsko",
- "countryNameDZ": "Alžírsko",
- "countryNameLR": "Libérie",
- "countryNameSO": "Somálsko",
- "countryNameDM": "Dominika",
- "countryNameEG": "Egypt",
- "countryNameGF": "Francouzská Guyana",
- "countryNameNZ": "Nový Zéland",
- "countryNamePS": "Palestinská samospráva",
- "countryNameIL": "Izrael",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Řecko",
- "countryNameNG": "Nigérie",
- "countryNameMR": "Mauritánie",
- "countryNameVI": "Americké Panenské ostrovy",
- "countryNameGQ": "Rovníková Guinea",
- "countryNameMX": "Mexiko",
- "countryNameDJ": "Džibutsko",
- "countryNameGN": "Guinea",
- "countryNameCN": "Čína",
- "countryNameMZ": "Mosambik",
- "countryNameBV": "Bouvetův ostrov",
- "countryNameNF": "Norfolk",
- "countryNameTZ": "Tanzanie",
- "countryNameAI": "Anguilla",
- "countryNameGS": "Jižní Georgie a Jižní Sandwichovy ostrovy",
- "countryNameRS": "Srbsko",
- "countryNameCC": "Kokosové ostrovy",
- "countryNameNA": "Namibie",
- "countryNameDE": "Německo",
- "countryNameCG": "Konžská republika",
- "countryNameKW": "Kuvajt",
- "countryNameMH": "Marshallovy ostrovy",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Bělorusko",
- "countryNameMY": "Malajsie",
- "countryNameST": "Svatý Tomáš a Princův ostrov",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Čad",
- "countryNameCX": "Vánoční ostrov",
- "countryNameIR": "Írán",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bissau",
- "countryNameUA": "Ukrajina",
- "countryNameCU": "Kuba",
- "countryNameCO": "Kolumbie",
- "countryNameNI": "Nikaragua",
- "countryNameHR": "Chorvatsko",
- "countryNameSC": "Seychely",
- "countryNameNL": "Nizozemsko",
- "countryNameUM": "Menší odlehlé ostrovy Spojených států amerických",
- "countryNameIM": "Ostrov Man",
- "countryNameFJ": "Fidži",
- "countryNameSR": "Surinam",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "Spojené království",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovinsko",
- "countryNameAM": "Arménie",
- "countryNameAR": "Argentina",
- "countryNamePM": "Saint-Pierre a Miquelon",
- "countryNameTF": "Francouzská jižní a antarktická území",
- "countryNameDO": "Dominikánská republika",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinik",
- "countryNamePT": "Portugalsko",
- "countryNameCF": "Středoafrická republika",
- "countryNameBE": "Belgie",
- "countryNameKM": "Komory",
- "countryNameLY": "Libye",
- "countryNameIE": "Irsko",
- "countryNameKP": "Severní Korea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slovensko",
- "countryNameTC": "Turks a Caicos",
- "countryNameNP": "Nepál",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Jemen",
- "countryNameBA": "Bosna a Hercegovina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Irák",
- "countryNameSJ": "Špicberky a Jan Mayen",
- "countryNameAX": "Ålandy",
- "countryNameKE": "Keňa",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermudy",
- "countryNameFO": "Faerské ostrovy",
- "countryNameBL": "Svatý Bartoloměj",
- "countryNameLB": "Libanon",
- "countryNameJM": "Jamajka",
- "countryNameAF": "Afghánistán",
- "countryNameES": "Španělsko",
- "countryNameMC": "Monako",
- "countryNameSG": "Singapur",
- "countryNameAL": "Albánie",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d’Ivoire (Pobřeží slonoviny)",
- "countryNameTW": "Tchaj-wan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cookovy ostrovy",
- "countryNameTH": "Thajsko",
- "countryNameHM": "Heardův ostrov a McDonaldovy ostrovy",
- "countryNameGD": "Grenada",
- "countryNameUS": "Spojené státy",
- "countryNameAT": "Rakousko",
- "countryNameKR": "Korejská republika",
- "countryNamePK": "Pákistán",
- "countryNameDK": "Dánsko",
- "countryNameSV": "Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Etiopie",
- "countryNameMG": "Madagaskar",
- "countryNameCR": "Kostarika",
- "countryNameLU": "Lucembursko",
- "countryNameQA": "Katar",
- "countryNameBT": "Bhútán",
- "countryNameSB": "Šalamounovy ostrovy",
- "countryNameAE": "Spojené arabské emiráty",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua a Barbuda",
- "countryNameMU": "Mauricius",
- "countryNameHU": "Maďarsko",
- "countryNameSX": "Svatý Martin (Nizozemsko)",
- "countryNameCH": "Švýcarsko",
- "countryNamePN": "Pitcairnovy ostrovy",
- "countryNameGL": "Grónsko",
- "countryNamePH": "Filipíny",
- "countryNameMT": "Malta",
- "countryNameKN": "Svatý Kryštof a Nevis",
- "countryNameLK": "Srí Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Lotyšsko",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "{0} nejde synchronizovat.",
+ "failureDescription": "Došlo k chybě a požadovanou synchronizaci se nám nepovedlo dokončit. Zkuste to prosím znovu.",
+ "pending": "Probíhá synchronizace {0}",
+ "pendingDescription": "Načítáme nejnovější data. Tento proces může trvat několik minut.",
+ "success": "Synchronizace {0} se dokončila.",
+ "successDescription": "Synchronizace se službou WUfB byla dokončena v {0}"
+ },
+ "SyncSpinner": {
+ "text": "Probíhá synchronizace. Může to trvat několik minut. Vyhledejte upozornění nebo se sem vraťte za pár minut."
+ },
+ "TabName": {
+ "basics": "Základní informace",
+ "driverUpdateSettings": "Nastavení",
+ "otherDrivers": "Jiné ovladače",
+ "properties": "Vlastnosti",
+ "recommendedDrivers": "Doporučené ovladače"
+ },
+ "driverAddFilter": "Přidat filtr",
+ "driverApplicableDevices": "Použitelná zařízení",
+ "driverApprovalStatus": "Stav",
+ "driverBulkActions": "Hromadné akce",
+ "driverClass": "Třída ovladače",
+ "driverCount": "Zobrazuje se {0} až {1} z celkového počtu {2} záznamů.",
+ "driverFilterNoneSelected": "Nic není vybráno.",
+ "driverManufacturer": "Výrobce",
+ "driverName": "Název ovladače",
+ "driverNameLower": "nasazení aktualizace ovladačů systému Windows",
+ "driverNameUpper": "nasazení aktualizace ovladačů systému Windows",
+ "driverRefresh": "Aktualizovat",
+ "driverReleaseDate": "Datum uvedení na trh",
+ "driverSearch": "Hledat",
+ "driverSearchKeyword": "Zadejte klíčové slovo pro hledání.",
+ "driverVersion": "Verze",
+ "firstDeploymentDate": "První nasazení",
+ "infoBoxText": "Po přiřazení a vytvoření zásad může vytvoření soupisu trvat až 24 hodin.",
+ "textBlockText": "Vyberte nastavení pro schválení a nasazení zásad. Zvolte, jestli chcete nastavit zásady pro automatické nebo ruční schválení a nasazování aktualizací. Metodu schvalování nelze po vytvoření zásady změnit, ale podrobností týkajících se schvalování a nasazení jednotlivých ovladačů bude možné změnit po vytvoření soupisu pro přiřazená zařízení."
+ },
+ "TACSettings": {
+ "edgeSettings": "Nastavení konfigurace Edge",
+ "edgeWindowsDataProtectionSettings": "Nastavení ochrany dat Edge (Windows) – Preview",
+ "edgeWindowsSettings": "Nastavení konfigurace Edge (Windows) – Preview",
+ "generalAppConfig": "Obecná konfigurace aplikace",
+ "generalSettings": "Obecná nastavení konfigurace",
+ "outlookSMIMEConfig": "Nastavení standardu S/MIME v Outlooku",
+ "outlookSettings": "Nastavení konfigurace Outlooku",
+ "sMIME": "Standard S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-de.json b/Documentation/Strings-de.json
index d195375..3c9f991 100644
--- a/Documentation/Strings-de.json
+++ b/Documentation/Strings-de.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Datenschutzkonfiguration"
- },
- "OrganizeMailByThread": {
- "title": "E-Mails nach Thread organisieren",
- "tooltip": "Das Standardverhalten in Outlook besteht darin, E-Mail-Nachrichten zu bündeln und als Unterhaltungsthread anzuzeigen. Wenn diese Einstellung deaktiviert ist, gruppiert Outlook die E-Mails nicht, sondern zeigt jede E-Mail einzeln an."
- },
- "Sync": {
- "header": "Kontaktfelder mit der App-Konfiguration für native Kontakte synchronisieren"
- },
- "allowBiometricsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
- "allowBiometricsTitle": "Biometrische Daten für App-Zugriff erforderlich",
- "allowBiometricsTooltip": "Möglicherweise werden biometrische Daten wie z. B. TouchID oder FaceID benötigt, damit Benutzer auf die App auf ihrem Gerät zugreifen können. Sofern erforderlich, werden neben dem in diesem Profil gewählten Authentifizierungsverfahren auch biometrische Daten verwendet. Diese Einstellung darf bei der Bereitstellung von Intune-App-Schutzrichtlinien nicht aktiviert werden, weil die App-Schutzrichtlinie Zugriffsanforderungen umfasst, die vor dem Zugriff auf verwaltete Daten erfüllt werden müssen. Wenn Sie beide Optionen aktivieren, werden mehrere Aufforderungen für den Zugriff auf Outlook Mobile angezeigt. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Aus“.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
- "allowCalendarNotificationsTitle": "Kalenderbenachrichtigungen",
- "allowCalendarNotificationsTooltip": "Hiermit wird die Anzeige vollständiger Details in Kalenderbenachrichtigungen zugelassen, wenn die App-Schutzrichtlinieneinstellung \"Benachrichtigungen zu Organisationsdaten\" auf \"Organisationsdaten blockieren\" festgelegt ist.",
- "allowDefaultAppSignatureTitle": "Standard-App-Signatur",
- "allowDefaultAppSignatureTooltip": "Die Standard-App-Signatur gibt an, ob die App „Outlook für iOS herunterladen“ als Standardsignatur beim Verfassen von Nachrichten verwendet. Wenn diese Einstellung deaktiviert ist, wird die Standardsignatur nicht verwendet. Benutzer können jedoch ihre eigene Signatur hinzufügen. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Ein“.",
- "allowExternalRecipientsMailTipTitle": "E-Mail-Info zu externen Empfängern",
- "allowExternalRecipientsMailTipTooltip": "Die E-Mail-Info zu externen Empfängern wird angezeigt, wenn der Absender einen externen Empfänger oder eine Verteilergruppe hinzufügt, die externe Empfänger enthält. Diese E-Mail-Info informiert die Absender darüber, wenn eine verfasste Nachricht die Organisation verlässt und unterstützt sie dabei, die richtigen Entscheidungen über Wortlaut, Ton und Inhalt zu treffen. Diese Einstellung ist nur für Exchange Online-Konten und lokale Konten verfügbar, die eine hybride moderne Authentifizierung nutzen. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Ein“.",
- "allowFocusedInboxTitle": "Posteingang mit Relevanz",
- "allowFocusedInboxTooltip": "Der Posteingang mit Relevanz unterteilt Ihren Posteingang in zwei Registerkarten: „Relevant“ und „Sonstige“. Ihre wichtigsten E-Mails befinden sich auf der Registerkarte „Relevant“, während die übrigen Nachrichten weiterhin leicht zugänglich, aber nicht im Weg sind: auf der Registerkarte „Sonstige“. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Ein“.",
- "allowMailNotificationsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
- "allowMailNotificationsTitle": "E-Mail-Benachrichtigungen",
- "allowMailNotificationsTooltip": "Dieser Wert gibt an, ob Outlook E-Mail-Benachrichtigungen zulässt. Durch Festlegen dieses Werts auf „Nein“ werden E-Mail-Benachrichtigungen deaktiviert.",
- "allowOrgDataOnWearablesTitle": "Organisationsdaten auf Wearables",
- "allowOrgDataOnWearablesTooltip": "Dieser Wert gibt an, ob Outlook-Daten mit einem Wearable synchronisiert werden können. Durch Festlegen dieses Werts auf „Nein“ wird die Synchronisierung mit Wearables deaktiviert.",
- "allowSaveContactsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Kontaktsynchronisierungseinstellung ändern darf.",
- "allowSaveContactsTitle": "Kontakte speichern",
- "allowSaveContactsTooltip": "Durch das Speichern von Kontakten im nativen Adressbuch des mobilen Geräts können neue Anrufe und Textnachrichten mit den vorhandenen Outlook-Kontakten des Benutzers verknüpft werden. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die App-Standardeinstellung „Aus“.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
- "allowSmartReplyTitle": "Vorgeschlagene Antworten",
- "allowSmartReplyTooltip": "Wenn Sie eine Nachricht öffnen, schlägt Outlook unter der Nachricht möglicherweise Antworten vor. Wenn Sie eine vorgeschlagene Antwort auswählen, können Sie die Antwort vor dem Senden bearbeiten. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Ein“.",
- "allowUserChangeGeneralToolTip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
- "allowUserChangeTitle": "Benutzer das Ändern der Einstellung erlauben",
- "blockExternalImagesAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
- "blockExternalImagesTitle": "Externe Bilder blockieren",
- "blockExternalImagesTooltip": "Wenn die Option „Externe Bilder blockieren“ aktiviert ist, verhindert die App das Herunterladen von im Internet gehosteten Bildern, die in den Nachrichtentext eingebettet sind. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Aus“.",
- "disableAddinsTitle": "Add-Ins zulassen",
- "disableAddinsTooltip": "Standardmäßig ermöglicht eine Appschutz-Richtlinie Benutzern die Verwendung von Drittanbieter-Add-Ins. Sie kann jedoch verwendet werden, um Add-Ins mit der Einstellung „Per Richtlinie verwaltete App-Daten mit nativen Apps synchronisieren“ zu blockieren. Wenn Sie diese Einstellung auf „Aus“ festlegen, werden Add-Ins blockiert, wenn die Einstellung für die Appschutz-Richtlinie auf „Zulassen“ festgelegt ist.",
- "discoverFeedTitle": "Ermittlungsfeed",
- "discoverFeedTooltip": "Im Ermittlungsfeed werden die Office-Dateien angezeigt, auf die am häufigsten zugegriffen wurde. Standardmäßig ist dieser Feed aktiviert, wenn Delve für den Benutzer aktiviert ist. Wurde die App nicht konfiguriert, lautet die Standard-App-Einstellung „Ein“.",
- "enableSMIMETitle": "S/MIME aktivieren",
- "enableSMIMETooltip": "Hiermit geben Sie an, ob S/MIME-Steuerelemente beim Verfassen einer E-Mail aktiviert werden.",
- "encryptAllEmails": "Alle E-Mails verschlüsseln",
- "encryptAllEmailsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung „Alle E-Mails verschlüsseln“ ändern darf.",
- "encryptAllEmailsTooltip": "Geben Sie an, ob alle E-Mails verschlüsselt werden müssen oder nicht. Bei der Verschlüsselung werden Daten mithilfe eines Verschlüsselungsverfahrens konvertiert, sodass sie nur vom vorgesehenen Empfänger gelesen werden können.",
- "ldapUrl": "LDAP-URL",
- "ldapUrlTooltip": "Dies ist der LDAP-Hostname, über den Clients die öffentlichen Verschlüsselungsschlüssel für E-Mail-Empfänger abrufen können. E-Mails werden verschlüsselt, wenn ein Schlüssel verfügbar ist. Unterstützte Formate: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
- "nativeCalendarSyncMAMOnlyTitle": "Kalendersynchronisierung zulassen",
- "nativeCalendarSyncMAMOnlyTooltip": "Standardmäßig erlaubt eine App-Schutzrichtlinie eine Kalendersynchronisierung mit der nativen Kalenderanwendung, kann aber verwendet werden, um die Verfügbarkeit der Kalendersynchronisierung zu blockieren. Diese Einstellung funktioniert unabhängig von der Einstellung der App-Schutzrichtlinie. So können Organisationen festlegen, ob die Kalendersynchronisierung für das Geschäfts-, Schul- oder Unikonto verfügbar ist.",
- "nativeCalendarSyncTitle": "Kalender synchronisieren",
- "nativeCalendarSyncTooltip": "Standardmäßig ermöglicht eine Appschutz-Richtlinie die Kalendersynchronisierung mit der nativen Kalender-App. Sie kann jedoch verwendet werden, um die Verfügbarkeit der Kalendersynchronisierung mit der Einstellung „Per Richtlinie verwaltete App-Daten mit nativen Apps synchronisieren“ zu blockieren. Wenn Sie diese Einstellung auf „Aus“ festlegen, wird die Kalendersynchronisierung blockiert, wenn die Einstellung für die Appschutz-Richtlinie auf „Zulassen“ festgelegt ist.",
- "playMyEmailsTitle": "Meine E-Mails wiedergeben",
- "playMyEmailsTooltip": "Das Feature „Meine E-Mails wiedergeben“ ist in der App standardmäßig nicht aktiviert, wird aber berechtigten Benutzern über ein Banner im Posteingang angepriesen. Wenn diese Option deaktiviert ist, werden berechtigte Benutzer in der App nicht auf dieses Feature aufmerksam gemacht. Benutzer können „Meine E-Mails wiedergeben“ auch dann manuell über die App aktivieren, wenn dieses Feature deaktiviert ist. Bei der Einstellung „Nicht konfiguriert“ ist die App-Einstellung standardmäßig aktiviert, und berechtigte Benutzer werden auf das Feature aufmerksam gemacht.",
- "signAllEmails": "Alle E-Mails signieren",
- "signAllEmailsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung „Alle E-Mails signieren“ ändern darf.",
- "signAllEmailsTooltip": "Geben Sie an, ob alle E-Mail-Nachrichten signiert werden müssen. Eine digitale Signatur belegt die Echtheit der E-Mail-Adresse und stellt sicher, dass der Inhalt während der Übertragung nicht verändert wird.",
- "syncAddressTitle": "Adresse",
- "syncAddressTooltip": "Dieser Wert gibt an, ob die Adresse des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncBirthdayTitle": "Geburtstag",
- "syncBirthdayTooltip": "Dieser Wert gibt an, ob der Geburtstag des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncCompanyTitle": "Firma",
- "syncCompanyTooltip": "Dieser Wert gibt an, ob der Unternehmensname des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncDepartmentTitle": "Abteilung",
- "syncDepartmentTooltip": "Dieser Wert gibt an, ob die Abteilung des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncEmailAddressTitle": "E-Mail-Adresse",
- "syncEmailAddressTooltip": "Dieser Wert gibt an, ob die E-Mail-Adresse des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncInstantMessagingAddressTitle": "Chatadresse",
- "syncInstantMessagingAddressTooltip": "Dieser Wert gibt an, ob die Chatadresse des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncJobTitleTitle": "Position",
- "syncJobTitleTooltip": "Dieser Wert gibt an, ob die Position des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncNicknameTitle": "Kurzname",
- "syncNicknameTooltip": "Dieser Wert gibt an, ob der Spitzname des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncNotesTitle": "Notes",
- "syncNotesTooltip": "Dieser Wert gibt an, ob die Notizen des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncPhoneHomeFaxNumberTitle": "Private Faxnummer",
- "syncPhoneHomeFaxNumberTooltip": "Dieser Wert gibt an, ob die private Faxnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncPhoneHomeNumberTitle": "Private Telefonnummer",
- "syncPhoneHomeNumberTooltip": "Dieser Wert gibt an, ob die private Telefonnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncPhoneMobileNumberTitle": "Mobiltelefonnummer",
- "syncPhoneMobileNumberTooltip": "Dieser Wert gibt an, ob die Mobiltelefonnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncPhoneOtherNumberTitle": "Andere Telefonnummer",
- "syncPhoneOtherNumberTooltip": "Dieser Wert gibt an, ob die andere Telefonnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncPhonePagerNumberTitle": "Pagertelefonnummer",
- "syncPhonePagerNumberTooltip": "Dieser Wert gibt an, ob die Pagertelefonnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncPhoneWorkFaxNumberTitle": "Geschäftliche Faxnummer",
- "syncPhoneWorkFaxNumberTooltip": "Dieser Wert gibt an, ob die geschäftliche Faxnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncPhoneWorkNumberTitle": "Geschäftliche Telefonnummer",
- "syncPhoneWorkNumberTooltip": "Dieser Wert gibt an, ob die geschäftliche Telefonnummer mit nativen Kontakten synchronisiert werden soll.",
- "syncPrefixTitle": "Namenspräfix",
- "syncPrefixTooltip": "Dieser Wert gibt an, ob die Anrede des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "syncSuffixTitle": "Namenssuffix",
- "syncSuffixTooltip": "Dieser Wert gibt an, ob das Namenssuffix des Kontakts mit nativen Kontakten synchronisiert werden soll.",
- "textPredictionsTitle": "Textvorhersagen",
- "textPredictionsTooltip": "Während Sie Nachrichten verfassen, kann Outlook Wörter und Ausdrücke vorschlagen. Wischen Sie, um einen von Outlook angebotenen Vorschlag zu akzeptieren. Wenn diese Einstellung auf „Nicht konfiguriert“ festgelegt ist, wird die standardmäßige App-Einstellung auf EIN festgelegt.",
- "themesEnabledTitle": "Designs aktiviert",
- "themesEnabledTooltip": "Geben Sie an, ob der Benutzer ein benutzerdefiniertes visuelles Design verwenden darf."
- },
- "Languages": {
- "ar-aE": "Arabisch (Vereinigte Arabische Emirate)",
- "ar-bH": "Arabisch (Bahrain)",
- "ar-dZ": "Arabisch (Algerien)",
- "ar-eG": "Arabisch (Ägypten)",
- "ar-iQ": "Arabisch (Irak)",
- "ar-jO": "Arabisch (Jordanien)",
- "ar-kW": "Arabisch (Kuwait)",
- "ar-lB": "Arabisch (Libanon)",
- "ar-lY": "Arabisch (Libyen)",
- "ar-mA": "Arabisch (Marokko)",
- "ar-oM": "Arabisch (Oman)",
- "ar-qA": "Arabisch (Katar)",
- "ar-sA": "Arabisch (Saudi-Arabien)",
- "ar-sY": "Arabisch (Syrien)",
- "ar-tN": "Arabisch (Tunesien)",
- "ar-yE": "Arabisch (Jemen)",
- "az-cyrl": "Aserbaidschanisch (Kyrillisch, Aserbaidschan)",
- "az-latn": "Aserbaidschanisch (lateinisch, Aserbaidschan)",
- "bn-bD": "Bangla (Bangladesch)",
- "bn-iN": "Bangla (Indien)",
- "bs-cyrl": "Bosnisch (Kyrillisch)",
- "bs-latn": "Bosnisch (Lateinisch)",
- "zh-cN": "Chinesisch (Volksrepublik China)",
- "zh-hK": "Chinesisch (Hongkong SAR)",
- "zh-mO": "Chinesisch (Macau SAR)",
- "zh-sG": "Chinesisch (Singapur)",
- "zh-tW": "Chinesisch (Taiwan)",
- "hr-bA": "Kroatisch (Lateinisch)",
- "hr-hR": "Kroatisch (Kroatien)",
- "nl-bE": "Niederländisch (Belgien)",
- "nl-nL": "Niederländisch (Niederlande)",
- "en-aU": "Englisch (Australien)",
- "en-bZ": "Englisch (Belize)",
- "en-cA": "Englisch (Kanada)",
- "en-cabn": "Englisch (Karibik)",
- "en-iE": "Englisch (Irland)",
- "en-iN": "Englisch (Indien)",
- "en-jM": "Englisch (Jamaika)",
- "en-mY": "Englisch (Malaysia)",
- "en-nZ": "Englisch (Neuseeland)",
- "en-pH": "Englisch (Republik Philippinen)",
- "en-sG": "Englisch (Singapur)",
- "en-tT": "Englisch (Trinidad und Tobago)",
- "en-uK": "Englisch (Vereinigtes Königreich)",
- "en-uS": "Englisch (Vereinigte Staaten)",
- "en-zA": "Englisch (Südafrika)",
- "en-zW": "Englisch (Zimbabwe)",
- "fr-bE": "Französisch (Belgien)",
- "fr-cA": "Französisch (Kanada)",
- "fr-cH": "Französisch (Schweiz)",
- "fr-fR": "Französisch (Frankreich)",
- "fr-lU": "Französisch (Luxemburg)",
- "fr-mC": "Französisch (Monaco)",
- "de-aT": "Deutsch (Österreich)",
- "de-cH": "Deutsch (Schweiz)",
- "de-dE": "Deutsch (Deutschland)",
- "de-lI": "Deutsch (Liechtenstein)",
- "de-lU": "Deutsch (Luxemburg)",
- "iu-cans": "Inuktitut (Silbenschrift, Kanada)",
- "iu-latn": "Inuktitut (Lateinisch, Kanada)",
- "it-cH": "Italienisch (Schweiz)",
- "it-iT": "Italienisch (Italien)",
- "ms-bN": "Malaiisch (Brunei Darussalam)",
- "ms-mY": "Malaiisch (Malaysia)",
- "mn-cN": "Mongolisch (Traditionelles Mongolisch, Volksrepublik China)",
- "mn-mN": "Mongolisch (kyrillisch, Mongolei)",
- "no-nB": "Norwegisch, Bokmål (Norwegen)",
- "no-nn": "Norwegisch, Nynorsk (Norwegen)",
- "pt-bR": "Portugiesisch (Brasilien)",
- "pt-pT": "Portugiesisch (Portugal)",
- "quz-bO": "Quechua (Bolivien)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Peru)",
- "smj-nO": "Samisch (Lule, Norwegen)",
- "smj-sE": "Samisch (Lule, Schweden)",
- "se-fI": "Samisch (Nord, Finnland)",
- "se-nO": "Samisch (Nord, Norwegen)",
- "se-sE": "Samisch (Nord, Schweden)",
- "sma-nO": "Samisch (Süd, Norwegen)",
- "sma-sE": "Samisch (Süd, Schweden)",
- "smn": "Samisch (Inari, Finnland)",
- "sms": "Samisch (Skolt, Finnland)",
- "sr-Cyrl-bA": "Serbisch (Kyrillisch)",
- "sr-Cyrl-rS": "Serbisch (Kyrillisch, Serbien/Montenegro)",
- "sr-Latn-bA": "Serbisch (Lateinisch)",
- "sr-Latn-rS": "Serbisch (Lateinisch, Serbien)",
- "dsb": "Niedersorbisch (Deutschland)",
- "hsb": "Obersorbisch (Deutschland)",
- "es-es-tradnl": "Spanisch (Spanien, traditionelle Sortierung)",
- "es-aR": "Spanisch (Argentinien)",
- "es-bO": "Spanisch (Bolivien)",
- "es-cL": "Spanisch (Chile)",
- "es-cO": "Spanisch (Kolumbien)",
- "es-cR": "Spanisch (Costa Rica)",
- "es-dO": "Spanisch (Dominikanische Republik)",
- "es-eC": "Spanisch (Ecuador)",
- "es-eS": "Spanisch (Spanien)",
- "es-gT": "Spanisch (Guatemala)",
- "es-hN": "Spanisch (Honduras)",
- "es-mX": "Spanisch (Mexiko)",
- "es-nI": "Spanisch (Nicaragua)",
- "es-pA": "Spanisch (Panama)",
- "es-pE": "Spanisch (Peru)",
- "es-pR": "Spanisch (Puerto Rico)",
- "es-pY": "Spanisch (Paraguay)",
- "es-sV": "Spanisch (El Salvador)",
- "es-uS": "Spanisch (USA)",
- "es-uY": "Spanisch (Uruguay)",
- "es-vE": "Spanisch (Venezuela)",
- "sv-fI": "Schwedisch (Finnland)",
- "uz-cyrl": "Usbekisch (kyrillisch, Usbekistan)",
- "uz-latn": "Usbekisch (lateinisch, Usbekistan)",
- "af": "Afrikaans (Südafrika)",
- "sq": "Albanien (Albanisch)",
- "am": "Amharisch (Äthiopien)",
- "hy": "Armenisch (Armenien)",
- "as": "Assamesisch (Indien)",
- "ba": "Baschkirisch (Russische Föderation)",
- "eu": "Baskisch (Baskisch)",
- "be": "Belarussisch (Belarus)",
- "br": "Bretonisch (Frankreich)",
- "bg": "Bulgarisch (Bulgarien)",
- "ca": "Katalanisch (Katalanisch)",
- "co": "Korsisch (Frankreich)",
- "cs": "Tschechisch (Tschechische Republik)",
- "da": "Dänisch (Dänemark)",
- "dv": "Divehi (Malediven)",
- "et": "Estnisch (Estland)",
- "fo": "Färöisch (Färöer)",
- "fil": "Filipino (Philippinen)",
- "fi": "Finnisch (Finnland)",
- "gl": "Galicisch (Galicisch)",
- "ka": "Georgisch (Georgien)",
- "el": "Griechisch (Griechenland)",
- "gu": "Gujarati (Indien)",
- "ha": "Hausa (Lateinisch, Nigeria)",
- "he": "Hebräisch (Israel)",
- "hi": "Hindi (Indien)",
- "hu": "Ungarisch (Ungarn)",
- "is": "Isländisch (Island)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonesisch (Indonesien)",
- "ga": "Irisch (Irland)",
- "xh": "isiXhosa (Südafrika)",
- "zu": "isiZulu (Südafrika)",
- "ja": "Japanisch (Japan)",
- "kn": "Kannada (Indien)",
- "kk": "Kasachisch (Kasachstan)",
- "km": "Khmer (Kambodscha)",
- "rw": "Kinyarwanda (Ruanda)",
- "sw": "Suaheli (Kenia)",
- "kok": "Konkani (Indien)",
- "ko": "Koreanisch (Südkorea)",
- "ky": "Kirgisisch (Kirgisistan)",
- "lo": "Laotisch (Demokratische Volksrepublik Laos)",
- "lv": "Lettisch (Lettland)",
- "lt": "Litauisch (Litauen)",
- "lb": "Luxemburgisch (Luxemburg)",
- "mk": "Mazedonisch (Nordmazedonien)",
- "ml": "Malayalam (Indien)",
- "mt": "Maltesisch (Malta)",
- "mi": "Maori (Neuseeland)",
- "mr": "Marathi (Indien)",
- "moh": "Mohawk (Kanada)",
- "ne": "Nepalesisch (Nepal)",
- "oc": "Okzitanisch (Frankreich)",
- "or": "Odia (Indien)",
- "ps": "Paschtu (Afghanistan)",
- "fa": "Persisch",
- "pl": "Polnisch (Polen)",
- "pa": "Punjabi (Indien)",
- "ro": "Rumänisch (Rumänien)",
- "rm": "Rätoromanisch (Schweiz)",
- "ru": "Russisch (Russische Föderation)",
- "sa": "Sanskrit (Indien)",
- "st": "Sesotho sa Leboa (Südafrika)",
- "tn": "Tswana (Südafrika)",
- "si": "Singhalesisch (Sri Lanka)",
- "sk": "Slowakisch (Slowakei)",
- "sl": "Slowenisch (Slowenien)",
- "sv": "Schwedisch (Schweden)",
- "syr": "Syrisch (Syrien)",
- "tg": "Tadschikisch (Kyrillisch, Tadschikistan)",
- "ta": "Tamil (Indien)",
- "tt": "Tatarisch (Russische Föderation)",
- "te": "Telugu (Indien)",
- "th": "Thailändisch (Thailand)",
- "bo": "Tibetanisch (VR China)",
- "tr": "Türkisch (Türkei)",
- "tk": "Turkmenisch (Turkmenistan)",
- "uk": "Ukrainisch (Ukraine)",
- "ur": "Urdu (Islamische Republik Pakistan)",
- "vi": "Vietnamesisch (Vietnam)",
- "cy": "Walisisch (Vereinigtes Königreich)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (Volksrepublik China)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender für Endpunkt",
- "androidDeviceOwnerApplications": "Anwendungen",
- "androidDeviceOwnerPolicyMessages": "Benutzerdefinierte Supportinformationen",
- "androidForWorkPassword": "Gerätekennwort",
- "appManagement": "Apps zulassen oder blockieren",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Eingeschränkte Apps",
- "applicationVisibility": "Apps anzeigen oder ausblenden",
- "applications": "App Store",
- "applicationsAndGames": "App Store, Dokumentanzeige, Spiele",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Apps und Oberfläche",
- "associatedDomains": "Zugehörige Domänen",
- "autonomousSingleAppMode": "Autonomer Einzelanwendungsmodus",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Windows-Verschlüsselung",
- "bootOptions": "Startoptionen",
- "browser": "Browser",
- "builtinApps": "Integrierte Apps",
- "cameras": "Kameras",
- "cellular": "Mobilfunk",
- "cloudAndStorage": "Cloud und Speicher",
- "cloudPrint": "Clouddrucker",
- "complianceEmailProfile": "E-Mail",
- "connectedDevices": "Verbundene Geräte",
- "connectivity": "Mobilfunk und Konnektivität",
- "contentCaching": "Content Caching",
- "controlPanelAndSettings": "Systemsteuerung und Einstellungen",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Benutzerdefinierte Konformität",
- "customConfiguration": "Benutzerdefiniertes Konfigurationsprofil",
- "customOMASettings": "Benutzerdefinierte OMA-URI-Einstellungen",
- "customPreferences": "Einstellungsdatei",
- "dFCISecuritySettings": "Sicherheitseinstellungen",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows-Firewall",
- "defenderLocalSecurityOptions": "Sicherheitsoptionen für lokales Gerät",
- "defenderSecurityCenter": "Microsoft Defender Security Center",
- "deliveryOptimization": "Übermittlungsoptimierung",
- "derivedCredentialAuthenticationConfiguration": "Abgeleitete Anmeldeinformation",
- "deviceExperience": "Geräteoberfläche",
- "deviceFirmwareConfigurationInterface": "Schnittstelle zur Konfiguration der Gerätefirmware",
- "deviceGuard": "Microsoft Defender-Anwendungssteuerung",
- "deviceHealth": "Geräteintegritätsdienst",
- "devicePassword": "Gerätekennwort",
- "deviceProperties": "Geräteeigenschaften",
- "deviceRestrictions": "Allgemein",
- "deviceSecurity": "Systemsicherheit",
- "display": "Anzeigen",
- "domainJoin": "Domänenbeitritt",
- "domains": "Domänen",
- "edgeBrowser": "Microsoft Edge-Legacybrowser (Version 45 und früher)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge-Kioskmodus",
- "editionUpgrade": "Editionsupgrade",
- "education": "Bildung",
- "educationDeviceCerts": "Gerätezertifikate",
- "educationStudentCerts": "Zertifikate für Schüler und Studenten",
- "educationTakeATest": "Prüfung",
- "educationTeacherCerts": "Lehrerzertifikate",
- "emailProfile": "E-Mail",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "App-Erweiterung für einmaliges Anmelden",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Spiele",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Integritätsüberwachung",
- "homeScreenLayout": "Layout der Startseite",
- "iOSWallpaper": "Hintergrundbild",
- "importedPFX": "Importiertes PKCS-Zertifikat",
- "iosDefenderAtp": "Microsoft Defender für Endpunkt",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Kernelerweiterungen",
- "keyboardAndDictionary": "Tastatur und Wörterbuch",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Dedizierte Geräte",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Kioskwebbrowser",
- "lockScreenMessage": "Nachricht auf Sperrbildschirm",
- "lockedScreenExperience": "Gesperrter Bildschirm",
- "logging": "Berichterstellung und Telemetrie",
- "loginItems": "Anmeldeelemente",
- "loginWindow": "Anmeldefenster",
- "macDefenderAtp": "Microsoft Defender für Endpunkt",
- "maintenance": "Wartung",
- "malware": "Schadsoftware",
- "messaging": "Messaging",
- "microphonesAndSpeakers": "Mikrofone und Lautsprecher",
- "networkBoundary": "Netzwerkgrenze",
- "networkProxy": "Netzwerkproxy",
- "notifications": "App-Benachrichtigungen",
- "pKCS": "PKCS-Zertifikat",
- "password": "Kennwort",
- "personalProfile": "Persönliches Profil",
- "personalization": "Personalisierung",
- "policyOverride": "Gruppenrichtlinie außer Kraft setzen",
- "ports": "Ports",
- "powerSettings": "Energieeinstellungen",
- "printer": "Drucker",
- "privacy": "Datenschutz",
- "privacyPerApp": "App-spezifische Datenschutzausnahmen",
- "privacyPreferences": "Datenschutzeinstellungen",
- "projection": "Projektion",
- "radios": "Radios",
- "sCCMCompliance": "Configuration Manager-Konformität",
- "sCEP": "SCEP-Zertifikat",
- "sCEPProperties": "SCEP-Zertifikat",
- "sMode": "Moduswechsel (nur Windows-Insider)",
- "safari": "Safari",
- "search": "Suchen",
- "session": "Sitzung",
- "sharedDevice": "Shared iPad",
- "sharedPCAccountManager": "Freigegebenes, von mehreren Benutzern verwendetes Gerät",
- "singleSignOn": "Einmaliges Anmelden",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Einstellungen",
- "start": "Starten",
- "systemExtensions": "Systemerweiterungen",
- "systemSecurity": "Systemsicherheit",
- "trustedCert": "Vertrauenswürdiges Zertifikat",
- "uEFIAccess": "UEFI-Zugriff",
- "updates": "Updates",
- "userRights": "Benutzerrechte",
- "usersAndAccounts": "Benutzer und Konten",
- "vPN": "Basis-VPN",
- "vPNApps": "Automatisches VPN",
- "vPNAppsAndTrafficRules": "Regeln zu Apps und Datenverkehr",
- "vPNConditionalAccess": "Bedingter Zugriff",
- "vPNConnectivity": "Konnektivität",
- "vPNDNSTriggers": "DNS-Einstellungen",
- "vPNIKEv2": "IKEv2-Einstellungen",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Getrenntes Tunneln",
- "vPNTrustedNetwork": "Erkennung vertrauenswürdiger Netzwerke",
- "wakeSettings": "Aktivierungseinstellungen",
- "webContentFilter": "Webinhaltsfilter",
- "wiFi": "WLAN",
- "win10Wifi": "WLAN",
- "windowsAtp": "Microsoft Defender für Endpunkt",
- "windowsDefenderATP": "Microsoft Defender für Endpunkt",
- "windowsHelloForBusiness": "Windows Hello for Business",
- "windowsSpotlight": "Windows-Blickpunkt",
- "wiredNetwork": "Kabelgebundenes Netzwerk",
- "wireless": "Drahtlosnetzwerke",
- "wirelessProjection": "Drahtlose Projektion",
- "workProfile": "Arbeitsprofileinstellungen",
- "workProfilePassword": "Arbeitsprofilkennwort",
- "xboxServices": "Xbox-Dienste",
- "zebraMx": "MX-Profil (nur Zebra)",
- "complianceActionsLabel": "Aktionen bei Inkompatibilität"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Beschreibung"
- },
- "FeatureDeploymentSettings": {
- "header": "Einstellungen für Featurebereitstellung"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Dieses Feature kann kein Downgrade für ein Gerät durchführen.",
- "label": "Bereitzustellendes Featureupdate"
- },
- "GradualRolloutEndDate": {
- "label": "Endgültige Gruppenverfügbarkeit"
- },
- "GradualRolloutInterval": {
- "label": "Tage zwischen Gruppen"
- },
- "GradualRolloutStartDate": {
- "label": "Erste Gruppenverfügbarkeit"
- },
- "Name": {
- "label": "Name"
- },
- "OptionalUpdate": {
- "label": "Erforderliches oder optionales Update"
- },
- "RolloutOptions": {
- "label": "Rollout-Optionen"
- },
- "RolloutSettings": {
- "header": "Wann möchten Sie das Update in Windows Update verfügbar machen?"
- },
- "ScopeSettings": {
- "header": "Konfigurieren Sie Bereichstags für diese Richtlinie."
- },
- "StartDateOnlyStartDate": {
- "label": "Erstes verfügbares Datum"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Deaktiviert",
- "enabled": "Aktiviert",
- "infoBalloonContent": "Steuern, ob das neueste Windows 10 Featureupdate auf Geräten installiert werden soll, die nicht für Windows 11 berechtigt sind",
- "label": "Wenn ein Gerät nicht für die Ausführung von Windows 11 berechtigt ist, das neueste Windows 10 Featureupdate installieren",
- "notApplicable": "Nicht zutreffend",
- "summaryLabel": "Windows 10 auf Geräten installieren, die nicht zur Ausführung von Windows 11 berechtigt sind"
- },
- "bladeTitle": "Funktionsupdatebereitstellungen",
- "deploymentSettingsTitle": "Bereitstellungseinstellungen",
- "loadError": "Fehler beim Laden.",
- "windows11EULA": "Durch Auswahl dieses Featureupdates für die Bereitstellung stimmen Sie zu, dass Sie bei Anwendung dieses Betriebssystems auf ein Gerät entweder (1) die entsprechende Windows-Lizenz durch Volumenlizenzierung erworben haben oder (2) dazu autorisiert sind, Ihre Organisation vertraglich zu binden, und in ihrem Namen die hier aufgeführten relevanten Microsoft-Software-Lizenzbedingungen akzeptieren: {0}."
- },
- "Notifications": {
- "deploymentSaved": "\"{0}\" wurde gespeichert.",
- "newFeatureUpdateDeploymentCreated": "Die neue Featureupdatebereitstellung wurde erstellt."
- },
- "TabName": {
- "deploymentSettings": "Bereitstellungseinstellungen",
- "groupAssignmentSettings": "Zuweisungen",
- "scopeSettings": "Bereichstags"
- },
- "gradualRolloutLicenseWarning": "Für diese Funktionalität ist eine bestimmte Lizenzierung erforderlich.",
- "gradualRolloutLicenseWarningEdit": "Diese Funktionalität kann weiterhin verwendet und konfiguriert werden, bis die Richtlinie gespeichert wird, ohne dass diese Funktionalität ausgewählt ist.",
- "licenseLearnMoreText": "Erfahren Sie mehr über Voraussetzungen und Richtlinien für Featureupdates.",
- "optionalUpdateWarning": "Optional ist nur für Windows 11-Updates verfügbar",
- "profileNameWarning": "Der Name darf weniger als 64 Zeichen umfassen.",
- "specificLicensingRequired": "Einige ausgewählte Funktionen erfordern eine bestimmte Lizenzierung."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Verwendung von Kleinbuchstaben in der PIN zulassen",
- "notAllow": "Verwendung von Kleinbuchstaben in der PIN nicht zulassen",
- "requireAtLeastOne": "Verwendung mindestens eines Kleinbuchstabens in der PIN erforderlich"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Verwendung von Sonderzeichen in der PIN zulassen",
- "notAllow": "Verwendung von Sonderzeichen in der PIN nicht zulassen",
- "requireAtLeastOne": "Verwendung mindestens eines Sonderzeichens in der PIN erforderlich"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Verwendung von Großbuchstaben in der PIN zulassen",
- "notAllow": "Verwendung von Großbuchstaben in der PIN nicht zulassen",
- "requireAtLeastOne": "Verwendung mindestens eines Großbuchstabens in der PIN erforderlich"
- }
+ "InstallContextType": {
+ "device": "Gerät",
+ "deviceContext": "Gerätekontext",
+ "user": "Benutzer",
+ "userContext": "Benutzerkontext"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "App-Version",
- "dependencyName": "Abhängigkeitsname",
- "lastModifiedTime": "Zeitpunkt der letzten Änderung",
- "relationship": "Beziehung",
- "replaced": "Ersetzt",
- "searchPlaceholder": "Nach App-Name filtern",
- "status": "Statusdetails",
- "statusDetails": "Status",
- "supersedenceName": "Ablösungsname"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Untergeordnete Abhängigkeit",
- "indirectSupersedence": "Nicht direkt verknüpft",
- "supersedenceAncestors": "Wir abgelöst",
- "supersedenceDescendants": "Abgelöst"
- },
- "SupersededReplaced": {
- "no": "Nein",
- "yes": "Ja"
- },
- "Tabs": {
- "chart": "Diagramm",
- "dependency": "Abhängigkeit",
- "label": "Anzeigen: ",
- "supersedence": "Ablösung",
- "table": "Tabelle"
- },
- "dependencyGraphAriaLabel": "Diagramm zur App-Abhängigkeit",
- "supersedenceGraphAriaLabel": "App-Ablösungsdiagramm"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Wählen Sie ein Ermittlungsskript aus.",
- "scriptFileLabel": "Ermittlungsskript auswählen"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Wenn diese Option aktiviert ist, müssen Geräte gemäß benutzerdefinierten Regeln konform sein, die in einer JSON-Datei basierend auf benutzerdefinierten Daten definiert sind, die von einem PowerShell-Ermittlungsskript zurückgegeben wurden.",
- "label": "Die benutzerdefinierte Compliance wird derzeit als Vorschauversion angeboten. Wenn dies allgemein verfügbar wird, können Sie es gegen zusätzliche Kosten zu den Lizenzierungsoptionen hinzufügen, die Microsoft Intune enthalten."
- },
- "ScriptPicker": {
- "objectName": "Skript",
- "placeholder": "Klicken Sie zur Auswahl hier.",
- "searchboxPlaceholder": "Nach Skriptname suchen",
- "title": "Ermittlungsskript auswählen"
- },
- "SummaryGrid": {
- "ariaLabel": "Zusammenfassung der Regeln für die benutzerdefinierte Konformität"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "Für alle Konformitätsrichtlinien ist eine Blockierungsaktion erforderlich.",
+ "graceperiod": "Zeitplan (Tage nach Inkompatibilität)",
+ "graceperiodInfo": "Geben Sie die Anzahl von Tagen nach Feststellen der Inkompatibilität an, nach denen diese Aktion für das Gerät des Benutzers ausgelöst werden soll.",
+ "subtitle": "Aktionsparameter angeben",
+ "title": "Aktionsparameter"
+ },
+ "List": {
+ "gracePeriodDay": "{0} Tag nach Inkompatibilität",
+ "gracePeriodDays": "{0} Tage nach Inkompatibilität",
+ "gracePeriodHour": "{0} Stunde nach Nichtkonformität",
+ "gracePeriodHours": "{0} Stunden nach Nichtkonformität",
+ "gracePeriodMinute": "{0} Minute nach Nichtkonformität",
+ "gracePeriodMinutes": "{0} Minuten nach Nichtkonformität",
+ "immediately": "Sofort",
+ "schedule": "Zeitplan",
+ "scheduleInfoBalloon": "Tage nach Nichtkonformität",
+ "subtitle": "Aktionsfolge auf nicht kompatiblen Geräte angeben",
+ "title": "Aktionen"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Andere",
+ "additionalRecipients": "Zusätzliche Empfänger (per E-Mail)",
+ "additionalRecipientsBladeTitle": "Zusätzliche Empfänger auswählen",
+ "emailAddressPrompt": "E-Mail-Adressen eingeben (durch Kommas getrennt)",
+ "invalidEmail": "Ungültige E-Mail-Adresse",
+ "messageTemplate": "Nachrichtenvorlage",
+ "noneSelected": "Nichts ausgewählt",
+ "notSelected": "Nicht ausgewählt",
+ "numSelected": "{0} ausgewählt",
+ "selected": "Ausgewählt"
},
- "UploadFile": {
- "jsonFileLabel": "JSON-Datei mit Ihren Einstellungen für die benutzerdefinierte Konformität hochladen und überprüfen",
- "noFileSelectedError": "Wählen Sie eine JSON-Datei aus.",
- "parseFileSelectedError": "Die JSON-Datei ist ungültig."
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filter",
- "noFilters": "Keine"
- },
- "Platform": {
- "all": "Alle",
- "android": "Android-Geräteadministrator",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Allgemein",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS und Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Unbekannt",
- "unsupported": "Nicht unterstützt",
- "windows": "Windows",
- "windows10": "Windows 10 und höher",
- "windows10CM": "Windows 10 und höher (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 und höher",
- "windows8And10": "Windows 8 und 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 und höher",
- "windows10AndWindowsServer": "Windows 10, Windows 11 und Windows Server (Configuration Manager)",
- "windows10andLaterCM": "Windows 10 und höher (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows-PC"
- },
+ "block": "Gerät als nicht konform markieren",
+ "lockDevice": "Gerät sperren (lokale Aktion)",
+ "lockDeviceWithPasscode": "Gerät sperren (lokale Aktion)",
+ "noAction": "Keine Aktion",
+ "noActionRow": "Keine Aktionen. Wählen Sie \"Hinzufügen\", um eine Aktion hinzuzufügen.",
+ "pushNotification": "Pushbenachrichtigung an Endbenutzer senden",
+ "remoteLock": "Nicht konformes Gerät remote sperren",
+ "removeSourceAccessProfile": "Quellzugriffsprofil entfernen",
+ "retire": "Gerät zur Abkoppelungsliste hinzufügen",
+ "wipe": "Zurücksetzen",
+ "emailNotification": "E-Mail an Endbenutzer senden"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Administratorgruppen",
+ "RoleAssignmentAdminDesc": "Benutzer der Administratorgruppe sind die Administratoren, die dieser Rolle zugewiesen sind.",
+ "rolesMenuTitle": "Endpoint Manager-Rollen",
+ "RoleAssignmentScopeDesc": "Administratoren mit dieser Rollenzuweisung können Richtlinien, Anwendungen und Remoteaufgaben bearbeiten.",
+ "RoleAssignmentScope": "Bereichsgruppen"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "App-Informationen",
"nameForOfficeSuitApp": "Informationen zur App-Suite"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "Unter Android können Sie die Identifikation per Fingerabdruck anstelle einer PIN verwenden. Benutzer werden aufgefordert, ihren Fingerabdruck bereitzustellen, wenn sie mit ihren Geschäftskonten auf diese App zugreifen.",
- "iOS": "Auf iOS-/iPadOS-Geräten können Sie den Benutzern auch ermöglichen, sich statt mit einer PIN per Fingerabdruck zu identifizieren. Benutzer werden aufgefordert, ihren Fingerabdruck zu scannen, wenn sie mit ihrem Geschäftskonto auf diese App zugreifen.",
- "mac": "Auf Mac-Geräten können Sie den Benutzern auch ermöglichen, sich statt mit einer PIN per Fingerabdruck zu identifizieren. Benutzer werden aufgefordert, ihren Fingerabdruck zu scannen, wenn sie mit ihrem Geschäftskonto auf diese App zugreifen."
- },
- "allowWidgetContentSync": "Wählen Sie „Blockieren“ aus, um zu verhindern, dass richtlinienseitig verwaltete Apps Daten in App-Widgets speichern. Wenn Sie „Zulassen“ auswählen, kann die richtlinienseitig verwaltete App Daten in App-Widgets speichern, wenn diese Features in der richtlinienseitig verwalteten App unterstützt und aktiviert werden. \r\n\r\n \r\n\r\nApps bieten möglicherweise zusätzliche Konfigurationsfunktionen mit App-Konfigurationsrichtlinien. Weitere Informationen finden Sie in der Dokumentation der App.",
- "appSharingFromLevel1": "Wählen Sie eine der folgenden Optionen aus, um die Apps anzugeben, von denen diese App Daten empfangen darf:",
- "appSharingFromLevel2": "{0}: Empfang von Daten in Organisationsdokumenten und Konten nur von anderen richtlinienverwalteten Apps zulassen",
- "appSharingFromLevel3": "{0}: Empfang von Daten aus beliebigen Apps in Organisationsdokumenten und Konten zulassen",
- "appSharingFromLevel4": "{0}: Empfang von Daten aus anderen Apps in Organisationsdokumenten oder Konten nicht zulassen",
- "appSharingFromLevel5": "{0}: Datenübertragungen aus anderen Apps zulassen und alle eingehenden Daten ohne Benutzeridentität als Organisationsdaten behandeln.",
- "appSharingToLevel1": "Wählen Sie eine der folgenden Optionen aus, um die Apps anzugeben, an die diese App Daten senden darf:",
- "appSharingToLevel2": "{0}: Senden von Organisationsdaten nur an andere richtlinienverwaltete Apps zulassen",
- "appSharingToLevel3": "{0}: Senden von Organisationsdaten an beliebige Apps zulassen",
- "appSharingToLevel4": "{0}: Senden von Organisationsdaten an andere Apps nicht zulassen",
- "appSharingToLevel5": "{0}: Nur Übertragung an andere richtlinienverwaltete Apps und Dateiübertragungen an andere MDM-verwaltete Apps auf registrierten Geräten zulassen",
- "appSharingToLevel6": "{0}: Nur Übertragungen an andere richtlinienverwaltete Apps zulassen und Betriebssystem-Dialogfelder „Öffnen in“/„Freigeben“ filtern, sodass nur per Richtlinie verwaltete Apps angezeigt werden",
- "assignmentFilterEdit1": "Wenn Sie Zuweisungsfilter auf diese Richtlinie anwenden, wird die Eigenschaft „Geräteverwaltungstyp“ zusätzlich zu den Werten angewendet, die für „Apps auf allen Gerätetypen anvisieren“ und „Gerätetypen“ auf der Seite „Apps“ angegeben sind.",
- "assignmentFilterEdit2": "Weitere Informationen zum Zuweisen von App-Schutzrichtlinien.",
- "conditionalEncryption1": "Wählen Sie „{0}“ aus, um die App-Verschlüsselung für den internen App-Speicher zu deaktivieren, wenn auf einem registrierten Gerät eine aktive Geräteverschlüsselung ermittelt wurde.",
- "conditionalEncryption2": "Hinweis: Intune kann nur Geräte ermitteln, die mit Intune MDM registriert wurden. Externer App-Speicher wird weiterhin verschlüsselt, um sicherzustellen, dass nicht verwaltete Anwendungen nicht auf Daten zugreifen können.",
- "contactSyncMac": "Wenn diese Option deaktiviert ist, können Apps keine Kontakte im nativen Adressbuch speichern.",
- "contactsSync": "Wählen Sie Blockieren aus, um zu verhindern, dass durch Richtlinien verwaltete Apps Daten in den nativen Apps des Geräts speichern (z. B. Kontakte, Kalender und Widgets), oder um die Verwendung von Add-Ins innerhalb der durch Richtlinien verwalteten Apps zu verhindern. Wenn Sie Zulassen auswählen, kann die durch Richtlinien verwaltete App Daten in den nativen Apps speichern oder Add-Ins verwenden, sofern diese Features in der durch Richtlinien verwalteten App unterstützt werden und aktiviert sind.
Apps bieten möglicherweise zusätzliche Konfigurationsfunktionen anhand von App-Konfigurationsrichtlinien. Weitere Informationen finden Sie in der Dokumentation der App.",
- "deviceTypeTargetingCreate1": "Die Zielgruppenadressierung des Gerätetyps wurde in den Schritt „Zuweisungen“ bei der Richtlinienerstellung verschoben.",
- "deviceTypeTargetingEdit1": "Wenn Sie Zuweisungsfilter auf diese Richtlinie anwenden, wird die Eigenschaft „Geräteverwaltungstyp“ zusätzlich zu den Werten angewendet, die für „Apps auf allen Gerätetypen anvisieren“ und „Gerätetypen“ auf der Seite „Apps“ angegeben sind.",
- "deviceTypeTargetingEdit2": "Um die Zielgruppenadressierung für Geräteverwaltungstypen zu bearbeiten, setzen Sie „Apps auf allen Gerätetypen anvisieren“ = „Ja“ zurück. Erstellen Sie dann einen MAM-Zuweisungsfilter mit den gewünschten Werten für „Geräteverwaltungstyp“.",
- "deviceTypeTargetingHasMoved": "Weitere Informationen zum Zuweisen von Appschutz-Richtlinie",
- "encryptionAndroid1": "Bei Apps, die einer Intune-Richtlinie für die Verwaltung mobiler Anwendungen zugeordnet sind, wird die Verschlüsselung durch Microsoft bereitgestellt. Daten werden bei Datei-E/A-Vorgängen gemäß den Einstellungen in der Richtlinie für die Verwaltung mobiler Anwendungen synchron verschlüsselt. Verwaltete Apps unter Android verwenden AES-128-Verschlüsselung im CBC-Modus unter Verwendung der plattformeigenen Kryptografiebibliotheken. Die Verschlüsselungsmethode ist nicht mit FIPS 140-2 konform. Die SHA-256-Verschlüsselung wird als explizite Anweisung unter Verwendung des SigAlg-Parameters unterstützt und funktioniert nur auf Geräten mit Version 4.2 und höher. Inhalte im Gerätespeicher werden immer verschlüsselt.",
- "encryptionAndroid2": "Wenn Sie in Ihrer App-Richtlinie eine Verschlüsselung anfordern, müssen Endbenutzer eine PIN einrichten und verwenden, um auf das Gerät zuzugreifen. Wenn keine PIN für den Gerätezugriff eingerichtet wurde, werden die Apps nicht gestartet, und den Benutzern wird stattdessen diese Meldung angezeigt: „Ihr Unternehmen hat festgelegt, dass Sie zunächst eine Geräte-PIN aktivieren müssen, um auf diese Anwendung zuzugreifen.“",
- "encryptionMac1": "Bei Apps, die einer Intune-Richtlinie für die Verwaltung mobiler Anwendungen zugeordnet sind, wird die Verschlüsselung durch Microsoft bereitgestellt. Daten werden bei Datei-E/A-Vorgängen gemäß den Einstellungen in der Richtlinie für die Verwaltung mobiler Anwendungen synchron verschlüsselt. Verwaltete Apps unter Mac verwenden AES-128-Verschlüsselung im CBC-Modus unter Verwendung der plattformeigenen Kryptografiebibliotheken. Die Verschlüsselungsmethode ist nicht mit FIPS 140-2 konform. Die SHA-256-Verschlüsselung wird als explizite Anweisung unter Verwendung des SigAlg-Parameters unterstützt und funktioniert nur auf Geräten mit Version 4.2 und höher. Inhalte im Gerätespeicher werden immer verschlüsselt.",
- "faceId1": "Gegebenenfalls können Sie die Verwendung der Gesichtserkennung anstelle einer PIN erlauben. Benutzer werden aufgefordert, beim Zugriff auf diese Anwendung über ihre Arbeitskonten eine Gesichtserkennung bereitzustellen.",
- "faceId2": "Wählen Sie Ja, um für den App-Zugriff die Gesichtserkennung anstelle einer PIN zu erlauben.",
- "managementLevelsAndroid1": "Über diese Option geben Sie an, ob diese Richtlinie für Geräte des Android-Geräteadministrators, für Android Enterprise-Geräte oder für nicht verwaltete Geräte gilt.",
- "managementLevelsAndroid2": "{0}: Nicht verwaltete Geräte sind Geräte, auf denen Intune MDM nicht erkannt wurde. Dazu gehören auch MDM-Drittanbieter.",
- "managementLevelsAndroid3": "{0}: Von Intune verwaltete Geräte, die die Android-Geräteverwaltungs-API verwenden.",
- "managementLevelsAndroid4": "{0}: Von Intune verwaltete Geräte, die Android Enterprise-Arbeitsprofile oder Android Enterprise Full Device Management verwenden.",
- "managementLevelsIos1": "Über diese Option geben Sie an, ob diese Richtlinie für über MDM verwaltete Geräte oder für nicht verwaltete Geräte gilt.",
- "managementLevelsIos2": "{0}: Nicht verwaltete Geräte sind Geräte, auf denen Intune MDM nicht erkannt wurde. Dazu gehören auch MDM-Drittanbieter.",
- "managementLevelsIos3": "{0}: Verwaltete Geräte werden über Intune MDM verwaltet.",
- "minAppVersion": "Definieren Sie die erforderliche App-Mindestversionsnummer, über die ein Benutzer für den sicheren Zugriff auf die App verfügen muss.",
- "minAppVersionWarning": "Definieren Sie die empfohlene App-Mindestversionsnummer, über die ein Benutzer für den sicheren Zugriff auf die App verfügen sollte.",
- "minOsVersion": "Definieren Sie die erforderliche Mindestversionsnummer für das Betriebssystem, über die ein Benutzer für den sicheren Zugriff auf die App verfügen muss.",
- "minOsVersionWarning": "Definieren Sie die empfohlene Mindestversionsnummer für das Betriebssystem, über die ein Benutzer für den sicheren Zugriff auf die App verfügen sollte.",
- "minPatchVersion": "Definieren Sie die niedrigste erforderliche Android-Sicherheitspatchebene, die ein Benutzer für den sicheren Zugriff auf die App verwenden kann.",
- "minPatchVersionWarning": "Definieren Sie die niedrigste empfohlene Android-Sicherheitspatchebene, die ein Benutzer für den sicheren Zugriff auf die App verwenden kann.",
- "minSdkVersion": "Definieren Sie die erforderliche SDK-Version für Intune-Anwendungsschutzrichtlinien, über die ein Benutzer für den sicheren Zugriff auf die App verfügen muss.",
- "requireAppPinDefault": "
Wählen Sie Ja aus, um die App-PIN zu deaktivieren, wenn eine Gerätesperre auf einem registrierten Gerät erkannt wurde.
",
- "targetAllApps1": "Mit dieser Option legen Sie fest, dass Ihre Richtlinie für Apps auf Geräten mit beliebigem Verwaltungsstatus gilt.",
- "targetAllApps2": "Bei der Auflösung von Richtlinienkonflikten wird diese Einstellung außer Kraft gesetzt, wenn ein Benutzer die Richtlinie für einen bestimmten Verwaltungsstatus festgelegt hat.",
- "touchId2": "Wählen Sie „{0}“ aus, um für den Zugriff auf die App eine Identifizierung per Fingerabdruck statt per PIN anzufordern."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Geben Sie die Anzahl von Tagen an, nach denen der Benutzer die PIN zurücksetzen muss.",
- "previousPinBlockCount": "Mit dieser Einstellung wird die Anzahl der vorherigen PINs angegeben, die Intune beibehält. Neue PINs müssen sich von denen unterscheiden, die Intune verwaltet."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Hiermit wird Windows Search das Fortsetzen der Suche in verschlüsselten Daten ermöglicht.",
- "authoritativeIpRanges": "Aktivieren Sie diese Einstellung, wenn Sie die automatische Windows-Erkennung von IP-Bereichen außer Kraft setzen möchten.",
- "authoritativeProxyServers": "Aktivieren Sie diese Einstellung, wenn Sie die automatische Windows-Erkennung von Proxyservern außer Kraft setzen möchten.",
- "checkInput": "Eingabe auf Gültigkeit prüfen",
- "dataRecoveryCert": "Ein Wiederherstellungszertifikat ist ein spezielles EFS-Zertifikat (Encrypting File System, verschlüsselndes Dateisystem), mit dem Sie verschlüsselte Dateien wiederherstellen können, wenn Ihr Verschlüsselungsschlüssel verloren geht oder beschädigt wird. Sie müssen das Wiederherstellungszertifikat erstellen und hier angeben. Weitere Informationen finden Sie hier.",
- "enterpriseCloudResources": "
Geben Sie Cloudressourcen an, die als unternehmenseigene Ressourcen eingestuft und mit der Windows Information Protection-Richtlinie geschützt werden sollen. Sie können mehrere Ressourcen angeben, indem Sie die einzelnen Einträge durch das Zeichen „|“ voneinander trennen.
Wenn Sie in Ihrem Unternehmen einen Proxy konfiguriert haben, können Sie den Proxy angeben, über den der Datenverkehr zu den von Ihnen angegebenen Cloudressourcen geleitet werden soll.
URL[,Proxy]|URL[,Proxy]
Ohne Proxy: contoso.sharepoint.com|contoso.visualstudio.com Mit Proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Geben Sie die IPv4-Bereiche an, aus denen Ihr Unternehmensnetzwerk gebildet wird. Diese werden zusammen mit den angegebenen Domänennamen für das Unternehmensnetzwerk verwendet, um die Grenzen Ihres Unternehmensnetzwerks zu definieren.
Für diese Einstellung muss Windows Information Protection aktiviert sein.
Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Komma voneinander trennen.
Geben Sie die IPv6-Bereiche an, aus denen Ihr Unternehmensnetzwerk gebildet wird. Diese werden zusammen mit den angegebenen Domänennamen für das Unternehmensnetzwerk verwendet, um die Grenzen Ihres Unternehmensnetzwerks zu definieren.
Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Komma voneinander trennen.
Wenn Sie in Ihrem Unternehmen einen Proxy konfiguriert haben, können Sie den Proxy festlegen, über den der Datenverkehr an die in den Unternehmenscloudressourcen-Einstellungen angegebenen Cloudressourcen geleitet werden soll.
Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Semikolon voneinander trennen.
Geben Sie die DNS-Namen an, aus denen Ihr Unternehmensnetzwerk gebildet wird. Diese werden zusammen mit den festgelegten IP-Bereichen verwendet, um die Grenzen Ihres Unternehmensnetzwerks zu definieren. Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Komma voneinander trennen.
Für diese Einstellung muss Windows Information Protection aktiviert sein.
Beispiel: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Geben Sie die DNS-Namen an, aus denen Ihr Unternehmensnetzwerk gebildet wird. Diese werden zusammen mit den festgelegten IP-Bereichen verwendet, um die Grenzen Ihres Unternehmensnetzwerks zu definieren. Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch „|“ voneinander trennen.
Für diese Einstellung muss Windows Information Protection aktiviert sein.
Beispiel: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
Wenn Sie extern zugängliche Proxys in Ihrem Unternehmensnetzwerk verwenden, geben Sie diese hier an. Bei der Angabe einer Proxyserveradresse müssen Sie auch den Port angeben, über den Datenverkehr zugelassen und durch Windows Information Protection geschützt werden soll.
Hinweis: Diese Liste darf keine Server aus Ihrer Liste interner Unternehmensproxyserver umfassen. Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Semikolon voneinander trennen.
",
- "maxInactivityTime1": "Gibt den maximal zulässigen Zeitraum (in Minuten) nach dem Wechsel eines Geräts in den Leerlauf an, bis das Gerät durch die PIN oder ein Kennwort gesperrt wird. Benutzer können einen beliebigen Timeoutwert auswählen, der kleiner ist als der in der Einstellungen-App angegebene maximale Zeitraum. Beachten Sie, dass für Lumia 950 und 950XL unabhängig von dem durch diese Richtlinie festgelegten Wert ein maximaler Timeoutwert von 5 Minuten gilt.",
- "maxInactivityTime2": "0 (Standard): Kein Timeout definiert. Der Standardwert „0“ wird als „Kein Timeout definiert“ interpretiert.",
- "maxPasswordAttempts1": "Diese Richtlinie zeigt auf dem Mobilgerät und auf dem Desktop unterschiedliche Verhaltensweisen.",
- "maxPasswordAttempts2": "Wenn der Benutzer auf einem Mobilgerät den durch diese Richtlinie festgelegten Wert erreicht, wird das Gerät zurückgesetzt.",
- "maxPasswordAttempts3": "Wenn der Benutzer auf einem Desktop den durch diese Richtlinie festgelegten Wert erreicht, wird er nicht zurückgesetzt. Stattdessen wird der Desktop in den BitLocker-Wiederherstellungsmodus versetzt, in dem die Daten nicht zugänglich, aber wiederherstellbar sind. Wenn BitLocker nicht aktiviert ist, kann die Richtlinie nicht durchgesetzt werden.",
- "maxPasswordAttempts4": "Vor dem Erreichen des Grenzwerts für fehlerhafte Versuche wird der Benutzer zum Sperrbildschirm geschickt und darauf hingewiesen, dass der Computer bei weiteren Fehlversuchen gesperrt wird. Wenn der Benutzer den Grenzwert erreicht, wird das Gerät automatisch neu gestartet und zeigt die BitLocker-Wiederherstellungsseite an. Auf dieser Seite wird der Benutzer aufgefordert, den BitLocker-Wiederherstellungsschlüssel einzugeben.",
- "maxPasswordAttempts5": "0 (Standard): Das Gerät wird nach einer fehlerhaften PIN- oder Kennworteingabe niemals zurückgesetzt.",
- "maxPasswordAttempts6": "Der sicherste Wert ist 0, wenn für alle Richtlinienwerte 0 festgelegt wurde; andernfalls ist der Mindestwert für die Richtlinie der sicherste Wert.",
- "mdmDiscoveryUrl": "Geben Sie die URL für den MDM-Registrierungsendpunkt an, der von Benutzern verwendet werden soll, die sich bei MDM registrieren. Standardmäßig wird diese für Intune angegeben.",
- "minimumPinLength1": "Der ganzzahlige Wert, der die Mindestanzahl von für die PIN erforderlichen Zeichen festlegt. Der Standardwert ist 4. Die niedrigste Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 4. Die größte Zahl, die Sie konfigurieren können, muss geringer sein als die Zahl, die in der Richtlinieneinstellung für die maximale PIN-Länge konfiguriert wurde, in jedem Fall jedoch geringer als 127.",
- "minimumPinLength2": "Wenn Sie diese Richtlinieneinstellung konfigurieren, muss die PIN-Länge mindestens dieser Zahl entsprechen. Wenn Sie diese Richtlinieneinstellung deaktivieren oder nicht konfigurieren, muss die PIN mindestens 4 Zeichen lang sein.",
- "name": "Der Name dieser Netzwerkgrenze",
- "neutralResources": "
Wenn Sie Endpunkte für die Authentifizierungsumleitung in Ihrem Unternehmen verwenden, geben Sie diese hier an. Die hier angegebenen Standorte werden je nach Kontext der Verbindung vor der Umleitung entweder als private Standorte oder als Unternehmensstandorte eingestuft.
Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Komma voneinander trennen.
Beispiel: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Der Wert, der Windows Hello for Business als Methode zum Anmelden bei Windows festlegt.",
- "passportForWork2": "Der Standardwert ist TRUE. Wenn Sie diese Richtlinie auf FALSE festlegen, kann der Benutzer Windows Hello for Business nur auf in Microsoft Entra eingebundenen Mobiltelefonen bereitstellen, auf denen die Bereitstellung erforderlich ist.",
- "pinExpiration": "Die größte Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 730. Die niedrigste Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 0. Wenn diese Richtlinie auf 0 festgelegt wird, läuft die PIN des Benutzers niemals ab.",
- "pinHistory1": "Die größte Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 50. Die niedrigste Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 0. Wenn diese Richtlinie auf 0 festgelegt wird, ist die Speicherung vorheriger PINs nicht erforderlich.",
- "pinHistory2": "Die aktuelle PIN des Benutzers ist in der Menge von PINs enthalten, die dem Benutzerkonto zugeordnet sind. Der PIN-Verlauf wird bei einer PIN-Zurücksetzung nicht beibehalten.",
- "protectUnderLock": "Schützt App-Inhalte, während sich das Gerät im gesperrten Zustand befindet.",
- "protectionModeBlock": "
Blockieren: Verhindert, dass Unternehmensdaten geschützte Apps verlassen.
",
- "protectionModeOff": "
Aus: Der Benutzer kann Daten aus geschützten Apps verschieben. Es werden keine Aktionen protokolliert.
",
- "protectionModeOverride": "
Außerkraftsetzungen zulassen: Der Benutzer wird abgefragt, wenn er versucht, Daten aus einer geschützten in eine nicht geschützte App zu verschieben. Wenn der Benutzer die Abfrage außer Kraft setzt, wird die Aktion protokolliert.
",
- "protectionModeSilent": "
Im Hintergrund: Der Benutzer kann Daten aus geschützten Apps verschieben. Diese Aktionen werden protokolliert.
",
- "required": "Erforderlich",
- "revokeOnMdmHandoff": "Wurde in Windows 10, Version 1703, hinzugefügt. Diese Richtlinie steuert, ob die WIP-Schlüssel widerrufen werden, wenn auf einem Gerät ein Upgrade von MAM auf MDM durchgeführt wird. Ist diese Option deaktiviert, werden die Schlüssel nicht widerrufen, und der Benutzer kann nach dem Upgrade weiterhin auf geschützte Dateien zugreifen. Dies wird empfohlen, wenn der MDM-Dienst mit derselben WIP-EnterpriseID wie der MAM-Dienst konfiguriert ist.",
- "revokeOnUnenroll": "Hiermit werden Verschlüsselungsschlüssel widerrufen, wenn ein Gerät die Registrierung bei dieser Richtlinie aufhebt.",
- "rmsTemplateForEdp": "Die TemplateID-GUID zur Verwendung für die RMS-Verschlüsselung. Durch die Azure RMS-Vorlage kann der IT-Administrator konfigurieren, wer wie lange auf die RMS-geschützte Datei zugreifen kann.",
- "showWipIcon": "Hiermit wird der Benutzer durch das Überlagern eines Symbols darauf hingewiesen, dass er gerade in einem Unternehmenskontext agiert.",
- "useRmsForWip": "Gibt an, ob die Azure RMS-Verschlüsselung für WIP zulässig ist."
- },
- "requireAppPin": "
Wählen Sie Ja aus, um die App-PIN zu deaktivieren, wenn eine Gerätesperre auf einem registrierten Gerät erkannt wurde.
Hinweis: Intune kann unter iOS/iPadOS keine Geräteregistrierung mit einer Drittanbieter-EMM-Lösung erkennen.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "App-Installation kann einen Geräteneustart erzwingen",
- "basedOnReturnCode": "Verhalten auf Grundlage von Rückgabecodes bestimmen",
- "force": "Intune erzwingt einen verbindlichen Geräteneustart",
- "suppress": "Keine bestimmte Aktion"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Erforderliche Installationszeit (Min.)",
- "maxRunTimeInMinutesToolTip": "Die Anzahl von Minuten, die das System auf den Abschluss des Installationsprogramms wartet. Der Standardwert ist 60 Minuten."
- },
- "RunAsAccountOptions": {
- "system": "System",
- "user": "Benutzer"
- },
- "availableUninstall": "Verfügbare Deinstallation zulassen",
- "availableUninstallTooltip": "Wählen Sie \"Ja\" aus, um die Deinstallationsoption für diese App für Benutzer aus dem Unternehmensportal bereitzustellen. Wählen Sie \"Nein\" aus, um zu verhindern, dass Benutzer die App aus dem Unternehmensportal deinstallieren.",
- "bladeTitle": "Programm",
- "deviceRestartBehavior": "Verhalten beim Geräteneustart",
- "deviceRestartBehaviorTooltip": "Wählen Sie das Verhalten des Geräteneustarts aus, nachdem die App erfolgreich installiert wurde. Wählen Sie \"Verhalten auf Grundlage von Rückgabecodes bestimmen\" aus, um das Gerät basierend auf den Rückgabecode-Konfigurationseinstellungen neu zu starten. Wählen Sie \"Keine bestimmte Aktion\" aus, um Geräteneustarts während der App-Installation für MSI-basierte Apps zu unterdrücken. Wählen Sie \"App-Installation kann einen Geräteneustart erzwingen\" aus, damit die App-Installation abgeschlossen werden kann, ohne dass Neustarts unterdrückt werden. Wählen Sie \"Intune erzwingt einen verbindlichen Geräteneustart\", um das Gerät nach erfolgreicher App-Installation grundsätzlich neu zu starten.",
- "header": "Geben Sie die Befehle zum Installieren und Deinstallieren dieser App an:",
- "installCommand": "Installationsbefehl",
- "installCommandMaxLengthErrorMessage": "Der Installationsbefehl darf die maximal zulässige Länge von 1024 Zeichen nicht überschreiten.",
- "installCommandTooltip": "Die Befehlszeile zur vollständigen Installation dieser App.",
- "runAs32Bit": "Befehle zur Installation und Deinstallation auf 64-Bit-Clients in einem 32-Bit-Prozess ausführen",
- "runAs32BitTooltip": "Wählen Sie \"Ja\", um die App auf 64-Bit-Clients in einem 32-Bit-Prozess zu installieren und zu deinstallieren. Wählen Sie \"Nein\" (Standardeinstellung) aus, um die App auf 64-Bit-Clients in einem 64-Bit-Prozess zu installieren. 32-Bit-Clients verwenden immer einen 32-Bit-Prozess.",
- "runAsAccount": "Installationsverhalten",
- "runAsAccountTooltip": "Wählen Sie \"System\" aus, um diese App für alle Benutzer zu installieren, sofern dies unterstützt wird. Wählen Sie \"Benutzer\" aus, um diese App für den auf dem Gerät angemeldeten Benutzer zu installieren. Bei MSI-Apps im dualen Modus verhindern Änderungen, dass Updates und Deinstallationen erfolgreich abgeschlossen werden, bis der Wert, der zum Zeitpunkt der ursprünglichen Installation für das Gerät galt, wiederhergestellt wird.",
- "selectorLabel": "Programm",
- "uninstallCommand": "Deinstallationsbefehl",
- "uninstallCommandTooltip": "Die Befehlszeile zur vollständigen Deinstallation dieser App."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Neu erstellen",
- "createNewResourceAccountInfo": "
\r\nErstellen Sie während der Registrierung ein neues Ressourcenkonto. Das Ressourcenkonto wird sofort der Ressourcenkontotabelle hinzugefügt, aber erst aktiviert, wenn das Gerät registriert und das Surface Hub-Abonnement überprüft wurde. Weitere Informationen zu Ressourcenkonten
\r\n ",
- "createNewResourceTitle": "Neues Ressourcenkonto erstellen",
- "deviceNameInvalid": "Der Gerätename weist ein ungültiges Format auf.",
- "deviceNameRequired": "Der Gerätename ist erforderlich.",
- "editResourceAccountLabel": "Bearbeiten",
- "selectExistingCommandMenu": "Vorhandenes Element auswählen"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "Namen dürfen höchstens 15 Zeichen umfassen und nur Buchstaben (a–Z, A–Z), Ziffern (0–9) und Bindestriche enthalten. Namen dürfen nicht ausschließlich aus Ziffern bestehen und keine Leerzeichen enthalten."
- },
- "Header": {
- "addressableUserName": "Benutzeranzeigename",
- "azureADDevice": "Zugeordnetes Microsoft Entra-Gerät",
- "batch": "Gruppentag",
- "dateAssigned": "Zuweisungsdatum",
- "deviceAccountPwd": "Gerätekontokennwort",
- "deviceAccountUpn": "Gerätekonto",
- "deviceDisplayName": "Gerätename",
- "deviceFriendlyName": "Anzeigename des Geräts",
- "deviceName": "Gerätename",
- "deviceUseType": "Art der Gerätenutzung",
- "enrollmentState": "Registrierungsstatus",
- "intuneDevice": "Zugeordnetes Intune-Gerät",
- "lastContacted": "Zuletzt kontaktiert",
- "make": "Hersteller",
- "model": "Modell",
- "profile": "Zugewiesenes Profil",
- "profileStatus": "Profilstatus",
- "purchaseOrderId": "Bestellung",
- "resourceAccount": "Ressourcenkonto",
- "serialNumber": "Seriennummer",
- "userPrincipalName": "Benutzer"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Ein Anzeigename ist erforderlich.",
- "pwdRequired": "Es ist ein Kennwort erforderlich.",
- "pwdValidFormat": "Das Kennwort kann nicht aktualisiert werden. Der für das neue Kennwort angegebene Wert erfüllt nicht die Anforderungen der Domäne hinsichtlich Länge oder Komplexität.",
- "upnRequired": "Ein Gerätekonto ist erforderlich.",
- "upnValidFormat": "Werte können Buchstaben (a–z, A–Z), Zahlen (0–9) und Bindestriche enthalten. Werte dürfen kein Leerzeichen enthalten."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Besprechungen und Präsentationen",
- "teamCollaboration": "Teamzusammenarbeit"
- },
- "Devices": {
- "featureDescription": "Mit Windows AutoPilot können Sie die Willkommensseite für Ihre Benutzer anpassen.",
- "importErrorStatus": "Einige Geräte wurden nicht importiert. Klicken Sie hier, um weitere Informationen zu erhalten.",
- "importPendingStatus": "Der Import wird ausgeführt. Verstrichene Zeit: {0} Min. Dieser Vorgang kann bis zu {1} Min. dauern."
- },
- "DirectoryService": {
- "activeDirectoryAD": "In Microsoft Entra Hybrid eingebunden",
- "activeDirectoryADLabel": "Microsoft Entra-Hybridbeitritt mit Autopilot",
- "azureAD": "Mit Microsoft Entra verknüpft",
- "unknownType": "Unbekannter Typ"
- },
- "Filter": {
- "enrollmentState": "Zustand",
- "profile": "Profilstatus"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "Der Anzeigename darf nicht leer sein."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Erstellen Sie eine Benennungsvorlage, um Ihren Geräten während der Registrierung Namen hinzuzufügen.",
- "label": "Vorlage für Gerätenamen anwenden"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "Für hybrid verknüpfte Microsoft Entra-Typen von Autopilot-Bereitstellungsprofilen werden Geräte mithilfe der in der Konfiguration des Domänenbeitritts angegebenen Einstellungen benannt."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MeineFirma-%RAND:4%",
- "label": "Namen eingeben",
- "noDisallowedChars": "Der Name darf nur alphanumerische Zeichen, Bindestriche, %SERIAL% oder %RAND:x% enthalten.",
- "serialLength": "Bei %SERIAL% dürfen höchstens 7 Zeichen verwendet werden.",
- "validateLessThan15Chars": "Der Name darf höchstens 15 Zeichen umfassen.",
- "validateNoSpaces": "Computernamen dürfen keine Leerzeichen enthalten.",
- "validateNotAllNumbers": "Der Name muss auch Buchstaben und/oder Bindestriche enthalten.",
- "validateNotEmpty": "Name darf nicht leer sein",
- "validateOnlyOneMacro": "Der Name darf nur entweder %SERIAL% oder %RAND:x% enthalten."
+ "ScopeTypes": {
+ "allDevices": "Alle Geräte",
+ "allUsers": "Alle Benutzer",
+ "allUsersAndDevices": "Alle Benutzer und alle Geräte",
+ "selectedGroups": "Ausgewählte Gruppen"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Beschreibung",
+ "placeholder": "Beschreibung eingeben"
+ },
+ "NameTextBox": {
+ "label": "Name",
+ "placeholder": "Namen eingeben"
+ },
+ "PublisherTextBox": {
+ "label": "Herausgeber",
+ "placeholder": "Geben Sie einen Herausgeber ein."
+ },
+ "VersionTextBox": {
+ "label": "Version"
+ },
+ "headerDescription": "Erstellen Sie ein neues benutzerdefiniertes Skriptpaket aus von Ihnen geschriebenen Skripts für Erkennung und Wartung."
},
- "ConfigureComputerNameTemplate": {
- "description": "Erstellen Sie einen eindeutigen Namen für Ihre Geräte. Die Namen dürfen höchstens 15 Zeichen umfassen und nur Buchstaben (a–Z, A–Z), Ziffern (0–9) und Bindestriche enthalten. Namen dürfen nicht ausschließlich Ziffern enthalten. Verwenden Sie das Makro \"%SERIAL%\", um eine hardwarespezifische Seriennummer hinzuzufügen. Alternativ dazu können Sie über das Makro \"%RAND:x%\" eine zufällige Zeichenfolge von Ziffern hinzufügen, wobei x der hinzuzufügenden Anzahl von Ziffern entspricht."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Ermöglichen Sie durch fünfmaliges Drücken der Windows-Taste die Ausführung der Windows-Willkommensseite ohne Benutzerauthentifizierung, um das Gerät zu registrieren und alle Systemkontext-Apps und -einstellungen bereitzustellen. Benutzerkontext-Apps und -einstellungen werden übermittelt, wenn der Benutzer sich anmeldet.",
- "label": "Vorab bereitgestellte Bereitstellung zulassen"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Der Autopilot Microsoft Entra-Hybridbeitrittsflow wird auch dann fortgesetzt, wenn während dem Schritt \"Windows-Willkommensseite\" keine Domänencontrollerkonnektivität hergestellt wird.",
- "label": "AD-Konnektivitätsprüfung überspringen"
- },
- "accountType": "Art des Benutzerkontos",
- "accountTypeInfo": "Geben Sie an, ob es sich bei den Benutzern um Administratoren oder Standardbenutzer für das Gerät handelt. Beachten Sie, dass diese Einstellung nicht für globale Administrator- oder Unternehmensadministratorkonten gilt. Diese Konten können keine Standardbenutzer sein, da sie Zugriff auf alle administrativen Funktionen in Microsoft Entra ID haben.",
- "configOOBEInfo": "
\r\nKonfigurieren Sie die Willkommensseite für Ihre Autopilot-Geräte.\r\n
",
- "configureDevice": "Bereitstellungsmodus",
- "configureDeviceHintForSurfaceHub2": "Autopilot unterstützt für Surface Hub 2 nur den Self-Deployment-Modus. Dieser Modus ordnet den Benutzer nicht dem registrierten Gerät zu, deshalb sind keine Benutzeranmeldeinformationen erforderlich.",
- "configureDeviceHintForWindowsPC": "
\r\n Der Bereitstellungsmodus steuert, ob Benutzer Anmeldeinformationen angeben müssen, um das Gerät bereitzustellen.\r\n
\r\n
\r\n
\r\n Benutzergesteuert: Geräte sind dem Benutzer zugeordnet, der das Gerät registriert, und zum Bereitstellen des Geräts sind Benutzeranmeldeinformationen erforderlich\r\n
\r\n
\r\n Selbstbereitstellung (Vorschau): Geräte sind nicht dem Benutzer zugeordnet, der das Gerät registriert, und zum Bereitstellen des Geräts sind keine Benutzeranmeldeinformationen erforderlich.\r\n
\r\n
",
- "createSurfaceHub2Info": "Konfigurieren Sie die Autopilot-Registrierungseinstellungen für Ihre Surface Hub 2-Geräte. Autopilot ermöglicht standardmäßig das Überspringen der Benutzerauthentifizierung auf der Windows-Willkommensseite. Erfahren Sie mehr über Windows Autopilot für Surface Hub 2.",
- "createWindowsPCInfo": "\r\n
\r\nFolgende Optionen werden für Autopilot-Geräte im Self-Deployment-Modus automatisch aktiviert:\r\n
\r\n
\r\n
\r\n Auswahl zur Nutzung am Arbeitsplatz oder zu Hause überspringen\r\n
\r\n
\r\n OEM-Registrierung und OneDrive-Konfiguration überspringen\r\n
\r\n
\r\n Benutzerauthentifizierung auf Windows-Willkommensseite überspringen\r\n
\r\n
",
- "endUserDevice": "Benutzergesteuert",
- "hideEscapeLink": "Optionen zur Kontoänderung ausblenden",
- "hideEscapeLinkInfo": "Optionen zum Ändern des Kontos und zum Starten mit einem anderen Konto werden jeweils während der anfänglichen Geräteeinrichtung auf der Anmeldeseite des Unternehmens und auf der Seite mit Domänenfehlern angezeigt. Um diese Optionen auszublenden, müssen Sie das Unternehmensbranding in Microsoft Entra ID konfigurieren (erfordert Windows 10, 1809 oder höher oder Windows 11).",
- "info": "Die AutoPilot-Profileinstellungen definieren die Willkommensseite, die den Benutzern beim ersten Start von Windows angezeigt wird. ",
- "language": "Sprache (Region)",
- "languageInfo": "Geben Sie die zu verwendende Sprache und Region an.",
- "licenseAgreement": "Microsoft Software-Lizenzbedingungen",
- "licenseAgreementInfo": "Hiermit wird angegeben, ob den Benutzern Lizenzbedingungen angezeigt werden.",
- "plugAndForgetDevice": "Automatische Bereitstellung",
- "privacySettingWarning": "Der Standardwert für die Sammlung von Diagnosedaten wurde für Geräte geändert, auf denen Windows 10, Version 1903 und höher, oder Windows 11 ausgeführt wird. ",
- "privacySettings": "Datenschutzeinstellungen",
- "privacySettingsInfo": "Hiermit wird angegeben, ob den Benutzern Datenschutzeinstellungen angezeigt werden.",
- "showCortanaConfigurationPage": "Cortana-Konfiguration",
- "showCortanaConfigurationPageInfo": "Bei Auswahl von \"Anzeigen\" wird die Einführung zur Cortana-Konfiguration beim Start aktiviert.",
- "skipEULAWarning": "Wichtige Informationen zum Ausblenden von Lizenzbedingungen",
- "skipKeyboardSelection": "Tastatur automatisch konfigurieren",
- "skipKeyboardSelectionInfo": "Bei TRUE wird die Tastaturauswahlseite übersprungen, wenn die Sprache festgelegt ist.",
- "subtitle": "AutoPilot-Profile",
- "title": "Windows-Willkommensseite",
- "useOSDefaultLanguage": "Betriebssystemstandard",
- "userSelect": "Benutzerauswahl"
- },
- "Sync": {
- "lastRequestedLabel": "Letzte Synchronisierungsanforderung",
- "lastSuccessfulLabel": "Letzte erfolgreiche Synchronisierung",
- "syncInProgress": "Es wird zurzeit eine Synchronisierung durchgeführt. Versuchen Sie es später noch mal.",
- "syncInitiated": "Die Synchronisierung der AutoPilot-Einstellungen wurde initiiert.",
- "syncSettingsTitle": "AutoPilot-Einstellungen synchronisieren"
- },
- "Title": {
- "devices": "Windows AutoPilot-Geräte"
- },
- "Tooltips": {
- "addressableUserName": "Name, der während der Geräteeinrichtung in der Begrüßung angezeigt wird.",
- "azureADDevice": "Wechseln Sie zu den Gerätedetails für das zugeordnete Gerät. N/V bedeutet, dass kein Gerät zugeordnet ist.",
- "batch": "Ein Zeichenfolgenattribut, das zum Identifizieren einer Gruppe von Geräten verwendet werden kann. Das Gruppentagfeld von Intune ist dem OrderID-Attribut auf Microsoft Entra-Geräten zugeordnet.",
- "dateAssigned": "Zeitstempel, der angibt, wann das Profil dem Gerät zugewiesen wurde.",
- "deviceAccountPwd": "Kennwort des Gerätekontos für Surface Hub Geräte. Geben Sie bei Eingabe auch das Gerätekonto und den Anzeigenamen ein.",
- "deviceAccountUpn": "E-Mail-Adresse des Gerätekontos für Surface Hub-Geräte. Geben Sie bei Eingabe auch das Kennwort und den Anzeigenamen des Gerätekontos ein.",
- "deviceDisplayName": "Eindeutigen Namen für ein Gerät konfigurieren Dieser Name wird mit hybrid verknüpften Microsoft Entra-Bereitstellungen ignoriert. Der Gerätename stammt weiterhin aus dem Domänenbeitrittsprofil für Microsoft Entra-Hybridgeräte.",
- "deviceFriendlyName": "Anzeigename des Geräts für Surface Hub Geräte. Geben Sie bei Eingabe auch das Gerätekonto und das Kennwort für das Gerätekonto ein.",
- "deviceName": "Der angezeigte Name, wenn jemand versucht hat, das Gerät zu ermitteln und eine Verbindung herzustellen.",
- "deviceUseType": " Das Gerät wird basierend auf Ihrer Auswahl eingerichtet. Sie können die Einstellungen später jederzeit ändern.\r\n
\r\n
Für Besprechungen und Präsentationen ist Windows Hello nicht aktiviert, und die Daten werden nach jeder Sitzung entfernt.\r\n
\r\n
Für die Teamzusammenarbeit ist Windows Hello aktiviert, und Profile werden für die schnelle Anmeldung gespeichert.
\r\n
",
- "enrollmentState": "Gibt an, ob das Gerät registriert wurde.",
- "intuneDevice": "Wechseln Sie zu den Gerätedetails für das zugeordnete Gerät. N/V bedeutet, dass kein Gerät zugeordnet ist.",
- "lastContacted": "Zeitstempel, der angibt, wann das Gerät zuletzt kontaktiert wurde.",
- "make": "Hersteller des ausgewählten Geräts.",
- "model": "Modell des ausgewählten Geräts",
- "profile": "Name des Profils, das dem Gerät zugewiesen ist.",
- "profileStatus": "Gibt an, ob dem Gerät ein Profil zugewiesen ist.",
- "purchaseOrderId": "Bestell-ID",
- "resourceAccount": "Die Identität des Geräts oder der Benutzerprinzipalname (UPN).",
- "serialNumber": "Seriennummer des ausgewählten Geräts.",
- "userPrincipalName": "Benutzer, der während der Geräteeinrichtung vorab für die Authentifizierung ausgefüllt wird."
- },
- "allDevices": "Nicht alle Geräte",
- "allDevicesAlreadyAssignedError": "Es wurde allen Geräten bereits ein Autopilot-Profil zugewiesen.",
- "assignFailedDescription": "Fehler beim Aktualisieren von Zuweisungen für {0}.",
- "assignFailedTitle": "Fehler beim Aktualisieren von AutoPilot-Profilzuweisungen.",
- "assignSuccessDescription": "Die Zuweisungen für {0} wurden erfolgreich aktualisiert.",
- "assignSuccessTitle": "Die AutoPilot-Profilzuweisungen wurden erfolgreich aktualisiert.",
- "assignSufaceHub2ProfileNextStep": "Nächste Schritte für diese Bereitstellung",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Weisen Sie dieses Profil mindestens einer Gerätegruppe zu.",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Weisen Sie jedem Surface Hub-Gerät, auf dem Sie dieses Profil bereitstellen, ein Ressourcenkonto zu.",
- "assignedDevicesCount": "Zugewiesene Geräte",
- "assignedDevicesResourceAccountDescription": "
Um dieses Profil auf einem Gerät bereitzustellen, müssen Sie dem Gerät ein Ressourcenkonto zuweisen. Wählen Sie jeweils ein Gerät pro Arbeitsschritt aus, um ein vorhandenes Ressourcenkonto zuzuweisen oder ein neues Ressourcenkonto zu erstellen. Weitere Informationen zu Ressourcenkonten
",
- "assignedDevicesResourceAccountStatusBarMessage": "Diese Tabelle listet nur die Surface Hub 2-Geräte auf, denen dieses Profil zugewiesen wurde.",
- "assigningDescription": "Die Zuweisungen für {0} werden aktualisiert.",
- "assigningTitle": "Die AutoPilot-Profilzuweisungen werden aktualisiert.",
- "autoremediationContext": "Wir haben auf diesem Gerät eine Hardwareänderung erkannt. Wir versuchen, die neue Hardware automatisch zu registrieren. Sie müssen jetzt nichts tun. Der Status wird beim nächsten Einchecken mit dem Ergebnis aktualisiert. Weitere Informationen über das Zurücksetzen des Profils.",
- "autoremediationTitle": "Für das Gerät {0} steht ein Fix aus.",
- "cannotDeleteMessage": "Dieses Profil ist Gruppen zugewiesen. Sie müssen die Zuweisung zu allen Gruppen aufheben, bevor Sie das Profil löschen können.",
- "cannotDeleteTitle": "\"{0}\" kann nicht gelöscht werden",
- "createdDateTime": "Erstellt",
- "deleteMessage": "Wenn Sie dieses AutoPilot-Profil löschen, wird für alle diesem Profil zugewiesenen Geräte der Status \"Nicht zugewiesen\" angezeigt.",
- "deleteMessageWithPolicySet": "\"{0}\" ist in mindestens einem Richtliniensatz enthalten. Wenn Sie \"{0}\" löschen, können Sie das Profil nicht mehr über diese Richtliniensätze zuweisen.",
- "deleteTitle": "Möchten Sie dieses Profil löschen?",
- "description": "Beschreibung",
- "deviceType": "Gerätetyp",
- "deviceUse": "Geräteverwendung",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot unterstützt nur Microsoft Entra-Einbindung für Surface Hub 2-Geräte. Geben Sie an, wie Geräte in Ihrer Organisation mit Active Directory (AD) verknüpft werden.\r\n
\r\n
\r\n
\r\n Mit Microsoft Entra verknüpft: Nur Cloud ohne lokale Windows Server Active Directory-Instanz.\r\n
\r\n Geben Sie an, wie Geräte in Ihrer Organisation Active Directory (AD) beitreten:\r\n
\r\n
\r\n
\r\n Mit Microsoft Entra verknüpft: Nur Cloud, ohne lokale Windows Server Active Directory-Umgebung\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Fehler beim Abrufen der Anzahl zugewiesener Geräte.",
- "getAssignmentsError": "Fehler beim Abrufen der AutoPilot-Profilzuweisungen.",
- "harvestDeviceId": "Alle Zielgeräte in Autopilot-Geräte konvertieren",
- "harvestDeviceIdDescription": "Standardmäßig kann dieses Profil nur auf Autopilot-Geräte angewendet werden, die vom Autopilot-Dienst synchronisiert werden.",
- "harvestDeviceIdInfo": "\r\n Wählen Sie \"Ja\" aus, um alle Zielgeräte für Autopilot zu registrieren (sofern noch nicht geschehen). Wenn registrierte Geräte das nächste Mal durch die Willkommensseite geführt werden, wird das zugewiesene Autopilot-Szenario durchlaufen.\r\n \r\n Beachten Sie, dass bestimmte Autopilot-Szenarien spezifische Windows-Mindestbuilds erfordern. Stellen Sie sicher, dass Ihr Gerät über den erforderlichen Mindestbuild verfügt, um das Szenario zu durchlaufen.\r\n \r\n Durch das Entfernen dieses Profils werden die betroffenen Geräte nicht aus Autopilot entfernt. Um ein Gerät aus Autopilot zu entfernen, verwenden Sie die Ansicht für Windows Autopilot-Geräte.\r\n ",
- "harvestDeviceIdWarning": "Nach der Konvertierung können Autopilot-Geräte nur wiederhergestellt werden, indem Sie sie aus der Liste der Autopilot-Geräte löschen.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Mit den Windows AutoPilot Deployment-Profilen können Sie die Willkommensseite für Ihre Geräte anpassen.",
- "invalidProfileNameMessage": "Das Zeichen \"{0}\" ist nicht zulässig.",
- "joinTypeLabel": "Microsoft Entra-ID beitreten als",
- "lastModifiedDateTime": "Zuletzt geändert:",
- "manualRemediationContext": "Wir haben auf diesem Gerät eine Hardwareänderung erkannt. Es erhält beim Zurücksetzen nicht automatisch ein Autopilot-Profil, es sei denn, Sie registrieren das Gerät erneut. Weitere Informationen über das Zurücksetzen des Profils.",
- "manualRemediationTitle": "Das Gerät {0} erfordert Ihre Aufmerksamkeit.",
- "name": "Name",
- "noAutopilotProfile": "Keine AutoPilot-Profile.",
- "notEnoughPermissionAssignedError": "Ihre Berechtigungen reichen nicht aus, um dieses Profil mindestens einer der ausgewählten Gruppen zuzuweisen. Wenden Sie sich an Ihren Administrator.",
- "profile": "Profil",
- "resourceAccountStatusBarMessage": "Ein Ressourcenkonto ist für jedes Surface Hub 2-Gerät erforderlich, für das dieses Profil bereitgestellt wird. Klicken Sie hier, um mehr zu erfahren.",
- "selectServices": "Verzeichnisdienst auswählen, dem Geräte beitreten sollen",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Bereitstellungsmodus",
- "windowsPCCommandMenu": "Windows-PC",
- "directoryServiceLabel": "Microsoft Entra ID beitreten als"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Administratorgruppen",
- "RoleAssignmentAdminDesc": "Benutzer der Administratorgruppe sind die Administratoren, die dieser Rolle zugewiesen sind.",
- "rolesMenuTitle": "Endpoint Manager-Rollen",
- "RoleAssignmentScopeDesc": "Administratoren mit dieser Rollenzuweisung können Richtlinien, Anwendungen und Remoteaufgaben bearbeiten.",
- "RoleAssignmentScope": "Bereichsgruppen"
- },
+ "ScopeTags": {
+ "headerDescription": "Wählen Sie mindestens eine Gruppe aus, um das Skriptpaket zuzuweisen."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Erkennungsskript",
+ "placeholder": "Text für Eingabeskript",
+ "requiredValidationMessage": "Geben Sie das Erkennungsskript ein."
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Skriptsignaturprüfung erzwingen"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Dieses Skript mit den Anmeldeinformationen des angemeldeten Benutzers ausführen"
+ },
+ "RemediationScript": {
+ "infoBox": "Dieses Skript wird im reinen Erkennungsmodus ausgeführt, weil kein Wartungsskript vorhanden ist."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Wiederherstellungsskript",
+ "placeholder": "Text für Eingabeskript"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Skript in 64-Bit-PowerShell ausführen"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Ungültiges Skript. Mindestens ein im Skript verwendetes Zeichen ist ungültig."
+ },
+ "headerDescription": "Erstellen Sie ein benutzerdefiniertes Skriptpaket aus Skripts, die Sie geschrieben haben. Standardmäßig werden Skripts täglich auf zugewiesenen Geräten ausgeführt.",
+ "infoBox": "Dieses Skript ist schreibgeschützt. Einige der Einstellungen für dieses Skript sind möglicherweise deaktiviert."
+ },
+ "title": "Benutzerdefiniertes Skript erstellen",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Intervall",
+ "time": "Datum und Uhrzeit"
+ },
+ "Interval": {
+ "day": "Wird jeden Tag wiederholt",
+ "days": "Wird alle {0} Tage wiederholt",
+ "hour": "Wird jede Stunde wiederholt",
+ "hours": "Wird alle {0} Stunden wiederholt",
+ "month": "Wird jeden Monat wiederholt",
+ "months": "Wird alle {0} Monate wiederholt",
+ "week": "Wird jede Woche wiederholt",
+ "weeks": "Wird alle {0} Wochen wiederholt"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) am {1}",
+ "withDate": "{0} am {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Bearbeiten: {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Nur ausgewählte blockierende Apps in der Technikerphase als fehlerhaft kennzeichnen",
- "apps": "Apps",
- "appsListName": "Anwendungsliste",
- "blockingApps": "Blockierende Apps",
- "managedApps": "Verwaltete Apps",
- "noApps": "Keine Anwendungen",
- "noAppsError": "Fehler beim Abrufen von Anwendungen.",
- "selectApps": "Apps auswählen",
- "selectedAppsCount": "{0} Apps ausgewählt (max. 100)",
- "useSelectedAppsAll": "Alle",
- "useSelectedAppsSelected": "Ausgewählt",
- "useSelectedAppsToggleLabel": "Geräteverwendung blockieren, bis erforderliche Apps installiert wurden (sofern dem Benutzer/Gerät zugewiesen)"
- },
- "Header": {
- "application": "Anwendung",
- "publisher": "Herausgeber",
- "version": "Version"
- },
- "SearchBox": {
- "ariaLabel": "Apps suchen",
- "placeHolder": "Nach Name oder Herausgeber suchen"
- },
- "allowToUseToggle": "Benutzern bei Installationsfehlern Geräteverwendung erlauben",
- "blockToggle": "Geräteverwendung blockieren, bis alle Apps und Profile installiert sind",
- "blockToolTip": "Wenn Sie dieser Liste zum Beispiel Microsoft Word hinzufügen, können Zielbenutzer und -geräte die Registrierungsstatusseite nicht mehr verlassen, bis Word erfolgreich installiert wurde.",
- "collectLogToggle": "Protokollsammlung und Diagnoseseite für Endbenutzer aktivieren",
- "create": "Profil erstellen",
- "customMessageTextBox": "Fehlermeldung",
- "customMessageToggle": "Bei einem Zeitlimit oder Fehler benutzerdefinierte Meldung anzeigen",
- "enableForAutopilotOnlyToggle": "Seite nur für Geräte anzeigen, die über die Willkommensseite bereitgestellt wurden",
- "installQualityUpdatesToggle": "Installieren von Windows-Qualitätsupdates (kann das Gerät neu starten) (Vorschau)",
- "progressToggle": "Konfigurationsfortschritt für Apps und Profile anzeigen",
- "resetToggle": "Benutzern bei Installationsfehlern das Zurücksetzen des Geräts erlauben",
- "timeout": "Fehler anzeigen, wenn die Installation länger als die angegebene Anzahl von Minuten dauert"
- },
+ "OfficeUpdateChannel": {
+ "current": "Aktueller Kanal",
+ "deferred": "Halbjährlicher Enterprise-Kanal",
+ "firstReleaseCurrent": "Aktueller Kanal (Vorschau)",
+ "firstReleaseDeferred": "Halbjährlicher Enterprise-Kanal (Vorschau)",
+ "monthlyEnterprise": "Monatlicher Enterprise-Kanal",
+ "placeHolder": "Eine auswählen"
+ },
"TableHeaders": {
"activity": "Aktivität",
"activityName": "Aktivitätsname",
@@ -1293,30 +417,175 @@
"excludedGroups": "Ausgeschlossene Gruppen",
"licenseType": "Lizenztyp"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Konfigurieren Sie die PIN- und Anmeldeinformationsanforderungen, die Benutzer erfüllen müssen, um in einem Arbeitskontext auf Apps zuzugreifen."
- },
- "DataProtection": {
- "infoText": "Diese Gruppe enthält die Steuerelemente zur Verhinderung von Datenverlust (Data Loss Prevention, DLP), z. B. Einschränkungen für ausschneiden, kopieren, einfügen und speichern als. Diese Einstellungen bestimmen, wie Benutzer mit Daten in den Apps interagieren."
- },
- "DeviceTypes": {
- "selectOne": "Wählen Sie mindestens einen Gerätetyp aus."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Für Apps auf allen Gerätetypen festlegen"
- },
- "infoText": "Wählen Sie aus, wie diese Richtlinie auf Apps auf unterschiedlichen Geräten angewendet werden soll. Fügen Sie dann mindestens eine App hinzu.",
- "selectOne": "Wählen Sie mindestens eine App aus, um eine Richtlinie zu erstellen."
- }
- },
- "AssignmentAction": {
- "exclude": "Ausgeschlossen",
- "include": "Enthalten",
- "includeAllDevicesVirtualGroup": "Enthalten",
- "includeAllUsersVirtualGroup": "Enthalten"
- },
+ "Inputs": {
+ "accountDomain": "Kontodomäne",
+ "accountDomainHint": "z. B. contosodomain",
+ "accountDomainInfoBalloon": "Geben Sie die Kontodomäne des Benutzers an.",
+ "accountTypeInfoBalloon": "Geben Sie den Kontotyp an, der basierend auf dem Authentifizierungsmodell konfiguriert wird.",
+ "allowContactSetting": "Benutzer das Ändern der Kontakteinstellung erlauben",
+ "allowContactSyncInfoBalloon": "Geben Sie an, ob der Benutzer die Kontaktsynchronisierungseinstellung ändern darf.",
+ "allowUserChange": "Benutzer das Ändern der Einstellung erlauben",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Geben Sie einen Paketnamen wie z. B. \"com.microsoft.word\" ein.",
+ "androidUrlValidation": "Geben Sie eine URL ähnlich der folgenden ein: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=de",
+ "appInstallContext": "App-Installationskontext",
+ "appUrlLabel": "Appstore-URL",
+ "appleUrlValidation": "Geben Sie eine gültige URL im Format https://www.itunes.apple.com/de/app/microsoft-excel/id586683407?mt=8 ein.",
+ "applicableDeviceType": "Anwendbarer Gerätetyp",
+ "assignmentActionLabel": "Modus",
+ "authenticationMethodInfoBalloon": "Geben Sie die Authentifizierungsmethode für den Benutzer an.",
+ "authenticationMetod": "Authentifizierungsmethode",
+ "authenticationType": "Authentifizierungstyp",
+ "authenticationTypeInfoBalloon": "Geben Sie den Authentifizierungstyp für den Benutzer an.",
+ "availableLicenseCount": "Verfügbare Lizenzen",
+ "basicAuth": "Standardauthentifizierung",
+ "biometricsInfoBalloon": "Möglicherweise werden biometrische Daten wie z. B. TouchID oder FaceID benötigt, damit Benutzer auf die App auf ihrem Gerät zugreifen können. Sofern erforderlich, werden neben dem in diesem Profil gewählten Authentifizierungsverfahren auch biometrische Daten verwendet. Diese Einstellung sollte bei der Bereitstellung von Intune-App-Schutzrichtlinien nicht aktiviert werden, weil die App-Schutzrichtlinie Zugriffsanforderungen umfasst, die vor dem Zugriff auf verwaltete Daten erfüllt werden müssen. Wenn Sie beide Optionen aktivieren, werden mehrere Aufforderungen für den Zugriff auf Outlook Mobile angezeigt. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die App-Standardeinstellung \"Aus\".",
+ "bookNameLabel": "E-Book-Name",
+ "bundleDescriptionHint": "Geben Sie eine Beschreibung für die enthaltenen Apps ein.",
+ "calendar": "Kalender",
+ "categoryLabel": "Kategorie",
+ "categoryNameLabel": "Standardname",
+ "certProfileType": "Zertifikatprofiltyp",
+ "certificate": "Zertifikat",
+ "certificates": "Zertifikate",
+ "commandLineLabel": "Befehlszeilenargumente",
+ "commandLineSizeHint": "Der Text der Befehlszeilenargumente darf maximal 1024 Zeichen lang sein.",
+ "configurationSettingsFormatLabel": "Format der Konfigurationseinstellungen",
+ "configurationSettingsLabel": "Einstellungsformat",
+ "contactSync": "Kontakte speichern",
+ "contactSyncInfoBalloon": "Durch das Speichern von Kontakten im nativen Adressbuch des mobilen Geräts können neue Anrufe und Textnachrichten mit den vorhandenen Outlook-Kontakten des Benutzers verknüpft werden. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die App-Standardeinstellung \"Aus\".",
+ "contacts": "Kontakte",
+ "createdDateTime": "Erstellt",
+ "defaultCategoryHint": "Standardkategorien können nicht geändert werden.",
+ "deploySMimeCertsFromIntune": "S/MIME-Zertifikate aus Intune bereitstellen",
+ "descriptionGenericLabel": "Beschreibung",
+ "descriptionHint": "Beschreibung eingeben...",
+ "descriptionLabel": "Beschreibung",
+ "descriptionSizeHint": "Die Länge der Beschreibung darf 10.000 Zeichen nicht überschreiten.",
+ "developerLabel": "Entwickler",
+ "developerSizeHint": "Der Entwicklername darf maximal 256 Zeichen lang sein.",
+ "disable": "Deaktivieren",
+ "disabled": "Deaktiviert",
+ "displayNameLabel": "Name",
+ "displayVersionHint": "App-Version eingeben",
+ "displayVersionLabel": "App-Version",
+ "displayVersionLengthCheck": "Die Anzeigeversion darf maximal 130 Zeichen lang sein.",
+ "eBookCategoryNameLabel": "Standardname",
+ "emailAccount": "E-Mail-Kontoname",
+ "emailAccountHint": "z. B. Unternehmens-E-Mail-Adresse",
+ "emailAccountInfoBalloon": "Geben Sie den Anzeigenamen für das E-Mail-Konto an, wie er den Benutzern auf ihren Geräten angezeigt wird.",
+ "emailAddressAttribute": "E-Mail-Adresse aus Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Geben Sie die E-Mail-Adresse an, die zum Senden und Empfangen von E-Mail verwendet werden soll.",
+ "emailServer": "E-Mail-Server",
+ "emailServerHint": "Beispiel: mail.contoso.com",
+ "emailServerInfoBalloon": "Geben Sie den Hostnamen Ihres Exchange-Servers an.",
+ "enable": "Aktivieren",
+ "enableSMime": "S/MIME aktivieren",
+ "enabled": "Aktiviert",
+ "encryptAllEmails": "Alle E-Mails verschlüsseln",
+ "encryptionCertificates": "Verschlüsselungszertifikate",
+ "endUserNotifications": "Benutzerbenachrichtigungen",
+ "enrollmentTypeLabel": "Geräteregistrierungstyp",
+ "externalRecipients": "E-Mail-Info zu externen Empfängern",
+ "externalRecipientsInfoBalloon": "Die E-Mail-Info zu externen Empfängern wird angezeigt, wenn der Absender einen externen Empfänger oder eine Verteilergruppe hinzufügt, die externe Empfänger enthält. Diese E-Mail-Info informiert die Absender darüber, wenn eine verfasste Nachricht die Organisation verlässt und unterstützt sie dabei, die richtigen Entscheidungen über Wortlaut, Ton und Inhalt zu treffen. Diese Einstellung ist nur für Exchange Online-Konten und lokale Konten verfügbar, die eine hybride moderne Authentifizierung nutzen. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App \"Ein\".",
+ "focusedInbox": "Posteingang mit Relevanz",
+ "focusedInboxInfoBalloon": "Der Posteingang mit Relevanz unterteilt Ihren Posteingang in zwei Registerkarten: \"Relevant\" und \"Sonstige\". Ihre wichtigsten E-Mails befinden sich auf der Registerkarte \"Relevant\", während die übrigen Nachrichten weiterhin leicht zugänglich, aber nicht im Weg sind: auf der Registerkarte \"Sonstige\". Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die App-Standardeinstellung \"Ein\".",
+ "fullScreenEnabledLabel": "Vollbild",
+ "gmailNineAmountOfEmail": "Menge an E-Mails für die Synchronisierung",
+ "gmailNineAuthenticationMethodInfoBalloon": "Wählen Sie aus, wie Benutzer sich beim E-Mail-Server authentifizieren sollen. Verwenden Sie Zertifikate, um den Endbenutzern die sicherste und komfortabelste Benutzeroberfläche zu bieten. Die zertifikatbasierte Authentifizierung ist noch nicht verfügbar, weil SCEP- und PKCS-Zertifikatprofile für Geräte von Gerätebesitzern nicht verfügbar sind. ",
+ "gmailNineCertificateUPNInfoBalloon": "Das Zertifikat muss den Benutzerprinzipalnamen (UPN) als alternativen Antragstellernamen enthalten.",
+ "gmailNineEmailAddressInfoBalloon": "Das Attribut, das Intune aus Microsoft Entra ID abruft, um die von diesem Profil verwendete E-Mail-Adresse dynamisch zu generieren, z. B. MeinName@contoso.com (UPN). Erfahren Sie mehr über Microsoft Entra-Attribute für E-Mail-Profile.",
+ "gmailNineEmailServerInfoBalloon": "Die Exchange-Adresse (URL) des E-Mail-Servers, mit der die von Ihnen angegebene App eine Verbindung herstellt, um E-Mails abzurufen.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Hiermit wird die Menge an E-Mails gesteuert, die vom Client synchronisiert werden.",
+ "gmailNineSSLInfoBalloon": "Aktivieren Sie SSL, um die gesamte Kommunikation mit dem E-Mail-Server abzusichern.",
+ "gmailNineUsernameInfoBalloon": "Das Attribut, das Intune aus Microsoft Entra ID abruft, um den von diesem Profil verwendeten Benutzernamen dynamisch zu generieren, z. B. MeinName@contoso.com (UPN) oder MeinName (Benutzername). Erfahren Sie mehr über Microsoft Entra-Attribute für E-Mail-Profile.",
+ "ignoreManifestScope": "Manifestbereich ignorieren",
+ "ignoreVersionDetection": "App-Version ignorieren",
+ "informationUrlLabel": "Informations-URL",
+ "informationUrlSizeHint": "Die maximale Länge der Informations-URL beträgt 1024 Zeichen.",
+ "installAsManaged": "Als verwaltet installieren",
+ "installationSourceLabel": "App-Typ",
+ "installerTypeInfoBalloon": "Der Installertyp des Anwendungspakets.",
+ "installerTypeLabel": "Installertyp",
+ "isFeatured": "Diese App als ausgewählte App im Unternehmensportal anzeigen",
+ "isMAMEnabledToggleLabel": "Ja",
+ "lastModifiedDateTime": "Uhrzeit der letzten Aktualisierung",
+ "ldapUrl": "LDAP-URL",
+ "licensingType": "Unterstützt die Gerätekontextzuweisung",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Mindestens erforderliches Betriebssystem",
+ "modernAuth": "Moderne Authentifizierung",
+ "nameHint": "Geben Sie einen Namen ein",
+ "nameLabel": "Name",
+ "nameSizeHint": "Der Name darf maximal 512 Zeichen lang sein.",
+ "notConfigured": "Nicht konfiguriert",
+ "notesLabel": "Hinweise",
+ "notesSizeHint": "Der Hinweistext darf maximal 1024 Zeichen lang sein.",
+ "notificationType": "Benachrichtigungstyp",
+ "oneDay": "Ein Tag",
+ "oneMonth": "Ein Monat",
+ "oneWeek": "Eine Woche",
+ "outlookSMimeSettings": "Outlook-S/MIME-Einstellungen",
+ "ownerLabel": "Besitzer",
+ "ownerSizeHint": "Der Besitzername darf maximal 256 Zeichen lang sein.",
+ "packageIdLabel": "Paketbezeichner",
+ "packageNameLabel": "Paketname",
+ "pivCredentialNotConfigured": "Sie haben keinen Aussteller für abgeleitete Anmeldeinformationen für Ihren Mandanten ausgewählt. Sie müssen einen Aussteller konfigurieren, um diese Richtlinie erfolgreich auf Geräte anwenden zu können.",
+ "platformLabel": "Plattform",
+ "policyDescriptionLabel": "Beschreibung",
+ "policyNameLabel": "Name",
+ "preComposedIconEnabled": "Vorverfasst",
+ "primarySMTPAddress": "Primäre SMTP-Adresse",
+ "privacyUrlLabel": "URL zu den Datenschutzbestimmungen",
+ "publisherHint": "Geben Sie einen Herausgebernamen ein.",
+ "publisherLabel": "Herausgeber",
+ "publisherSizeHint": "Der Herausgebernamen muss zwischen 2 und 1024 Zeichen (einschließlich) lang sein.",
+ "require": "Anfordern",
+ "requireBiometrics": "Biometrische Daten für App-Zugriff erforderlich",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "Mindestens ein Geltungsbereichstag ist erforderlich.",
+ "searchAppLabel": "App auswählen",
+ "searchAppLinkText": "App Store durchsuchen",
+ "searchWinGetPublicRepositoryLinkText": "Durchsuchen Sie das Community-Repository des Windows-Paket-Managers",
+ "searchWinGetStoreRepositoryLinkText": "Microsoft Store-App (neu) durchsuchen",
+ "selectAAD": "Wählen Sie ein Microsoft Entra-Attribut aus.",
+ "selectAppFileLabel": "Datei auswählen",
+ "selectAppFileLinkText": "App-Paketdatei auswählen",
+ "selectAppFileToUpdateLabel": "Zu aktualisierende Datei auswählen",
+ "selectAuthMethod": "Authentifizierungsmethode auswählen",
+ "selectAuthType": "Authentifizierungstyp auswählen",
+ "selectCatalogAppLabel": "App auswählen",
+ "selectCatalogAppLinkText": "App-Katalog für Unternehmen durchsuchen",
+ "selectCertificate": "Zertifikat auswählen",
+ "signAllEmails": "Alle E-Mails signieren",
+ "signingCertificates": "Signaturzertifikate",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Beschreibung der Suite",
+ "suiteNameLabel": "Name der Suite",
+ "targetApplicationBundleIdentifier": "Bezeichner für Zielanwendungspaket",
+ "targetedPlatformsLabel": "Zielplattform",
+ "tasks": "Tasks",
+ "threeDays": "Drei Tage",
+ "totalLicenseCount": "Lizenzen insgesamt",
+ "twoWeeks": "Zwei Wochen",
+ "unifiedAssignmentsLabel": "Zuweisen zu:",
+ "unlimited": "Unbegrenzt",
+ "urlHint": "Geben Sie eine gültige URL ein.",
+ "useManagedBrowserHint": "Nur Android und iOS. Erfahren Sie mehr.",
+ "useManagedBrowserLabel": "Managed Browser zum Öffnen dieses Links anfordern",
+ "userPrinicipalName": "Benutzerprinzipalname",
+ "username": "Benutzername",
+ "usernameAttribute": "Benutzernamenattribut aus Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Geben Sie den Benutzerprinzipalnamen für das E-Mail-Profil an, das zum Authentifizieren des Kontos verwendet wird.",
+ "usernamePassword": "Benutzername und Kennwort",
+ "webAppUrlHint": "Geben Sie eine gültige URL ein, die mit http:// oder https:// beginnt.",
+ "webAppUrlLabel": "App-URL",
+ "webAppUrlSizeHint": "Die maximale Länge der App-URL beträgt 1024 Zeichen",
+ "windowsUrlValidation": "Geben Sie eine gültige URL ähnlich diese https://www.microsoft.com/store/p/lync/9wzdncrfhvhm ein.",
+ "xMLDataEntered": "Eingegebenen XML-Daten",
+ "xmlFormatInvalid": "Das XML-Richtlinienformat ist ungültig.",
+ "xmlTooLarge": "Die Eingabegröße muss unter 1 MB liegen."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Betroffene Benutzer werden durch die zugewiesene Seite zur Co-Verwaltungsautorität mit der nächsthöheren Priorität oder durch die Standardseite zur Co-Verwaltungsautorität eingeschränkt, falls keine andere Seite zur Co-Verwaltungsautorität zugewiesen wird.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Co-Verwaltungsautorität",
"settingDescription": "Die Einstellungen für die Co-Verwaltung legen fest, wer der Besitzer der Workloads ist."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise-System-App",
- "androidForWorkApp": "Verwaltete Google Play Store-App",
- "androidLobApp": "Branchenspezifische Android-App",
- "androidStoreApp": "Android Store-App",
- "builtInAndroid": "Integrierte Android-App",
- "builtInApp": "Integrierte App",
- "builtInIos": "Integrierte iOS-App",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS-Webclip",
- "iosLobApp": "Branchenspezifische iOS-App",
- "iosStoreApp": "iOS Store-App",
- "iosVppApp": "iOS Volume Purchase Program-App",
- "lineOfBusinessApp": "Branchenspezifische App",
- "macOSDmgApp": "macOS-App (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Branchenspezifische macOS-App",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365-Apps (macOS)",
- "macOSPkgApp": "macOS-App (PKG)",
- "macOSWebClip": "macOS-Webclip",
- "macOsVppApp": "macOS-Volume Purchase Program-App",
- "managedAndroidLobApp": "Verwaltete branchenspezifische Android-App",
- "managedAndroidStoreApp": "Verwaltete Android Store-App",
- "managedGooglePlayApp": "Verwaltete Google Play Store-App",
- "managedGooglePlayPrivateApp": "Private verwaltete Google Play-App",
- "managedGooglePlayWebApp": "Weblink für verwaltetes Google Play",
- "managedIosLobApp": "Verwaltete branchenspezifische iOS-App",
- "managedIosStoreApp": "Verwaltete iOS Store-App",
- "microsoftStoreForBusinessApp": "Microsoft Store für Unternehmen-App",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store für Unternehmen",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 und höher)",
- "webApp": "Weblink",
- "windowsAppXLobApp": "Branchenspezifische Windows-APPX-App",
- "windowsClassicApp": "Windows-App (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 und höher)",
- "windowsMobileMsiLobApp": "Branchenspezifische Windows MSI-App",
- "windowsPhone81AppXBundleLobApp": "Branchenspezifische Windows Phone 8.1-APPX-App",
- "windowsPhone81AppXLobApp": "Branchenspezifische Windows Phone 8.1-APPX-App",
- "windowsPhone81StoreApp": "Windows Phone 8.1 Store-App",
- "windowsPhoneXapLobApp": "Branchenspezifische Windows Phone-XAP-App",
- "windowsStoreApp": "Microsoft Store-App (Legacy)",
- "windowsUniversalAppXLobApp": "Branchenspezifische Windows Universal-APPX-App",
- "windowsUniversalLobApp": "Branchenspezifische Windows Universal-App",
- "windowsWebApp": "Windows-Weblink"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Empfohlen",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrain",
+ "countryNameZA": "Südafrika",
+ "countryNameJO": "Jordanien",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Tschechische Republik",
+ "countryNameLT": "Litauen",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hongkong (SAR)",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Saudi-Arabien",
+ "countryNamePG": "Papua-Neuguinea",
+ "countryNameBW": "Botsuana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "Indien",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Rumänien",
+ "countryNameKZ": "Kasachstan",
+ "countryNameLC": "St. Lucia",
+ "countryNameGE": "Georgien",
+ "countryNameTT": "Trinidad und Tobago",
+ "countryNameMP": "Nördliche Marianen",
+ "countryNameMV": "Malediven",
+ "countryNameFI": "Finnland",
+ "countryNameNO": "Norwegen",
+ "countryNameEE": "Estland",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Usbekistan",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tadschikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "Frankreich",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italien",
+ "countryNameAZ": "Aserbaidschan",
+ "countryNameKG": "Kirgisistan",
+ "countryNameWF": "Wallis und Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falklandinseln",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "Südsudan",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Syrien",
+ "countryNameMD": "Republik Moldau",
+ "countryNameVC": "St. Vincent und die Grenadinen",
+ "countryNameID": "Indonesien",
+ "countryNameRE": "Réunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "Nordmazedonien",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Französisch-Polynesien",
+ "countryNameKY": "Kaimaninseln",
+ "countryNameIO": "Britisches Territorium im Indischen Ozean",
+ "countryNameRU": "Russland",
+ "countryNameMA": "Marokko",
+ "countryNameAU": "Australien",
+ "countryNameBO": "Bolivien",
+ "countryNameVA": "Heiliger Stuhl (Staat der Vatikanstadt)",
+ "countryNameVG": "Britische Jungferninseln",
+ "countryNameFM": "Mikronesien",
+ "countryNameAQ": "Antarktis",
+ "countryNameZM": "Sambia",
+ "countryNameBR": "Brasilien",
+ "countryNameIS": "Island",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgarien",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamas",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macau (SAR)",
+ "countryNameRW": "Ruanda",
+ "countryNameAS": "Amerikanisch-Samoa",
+ "countryNameBQ": "Bonaire, St. Eustatius und Saba",
+ "countryNameMF": "St. Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Neukaledonien",
+ "countryNameAC": "Ascension",
+ "countryNameBN": "Brunei Darussalam",
+ "countryNameBD": "Bangladesch",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabun",
+ "countryNameCA": "Kanada",
+ "countryNameSH": "St. Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolei",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Kamerun",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japan",
+ "countryNameCY": "Zypern",
+ "countryNameCD": "Kongo, Demokratische Republik",
+ "countryNameTN": "Tunesien",
+ "countryNameTR": "Türkei",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Schweden",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Kambodscha",
+ "countryNamePL": "Polen",
+ "countryNameDZ": "Algerien",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Ägypten",
+ "countryNameGF": "Französisch-Guyana",
+ "countryNameNZ": "Neuseeland",
+ "countryNamePS": "Palästinensische Behörde",
+ "countryNameIL": "Israel",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Griechenland",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauretanien",
+ "countryNameVI": "Amerikanische Jungferninseln",
+ "countryNameGQ": "Äquatorialguinea",
+ "countryNameMX": "Mexiko",
+ "countryNameDJ": "Dschibuti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "China",
+ "countryNameMZ": "Mosambik",
+ "countryNameBV": "Bouvetinsel",
+ "countryNameNF": "Norfolkinsel",
+ "countryNameTZ": "Tansania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "Südgeorgien und die Südlichen Sandwichinseln",
+ "countryNameRS": "Serbien",
+ "countryNameCC": "Kokosinseln",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Deutschland",
+ "countryNameCG": "Republik Kongo",
+ "countryNameKW": "Kuwait",
+ "countryNameMH": "Marshallinseln",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarus",
+ "countryNameMY": "Malaysia",
+ "countryNameST": "São Tomé und Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Tschad",
+ "countryNameCX": "Weihnachtsinsel",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bissau",
+ "countryNameUA": "Ukraine",
+ "countryNameCU": "Kuba",
+ "countryNameCO": "Kolumbien",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Kroatien",
+ "countryNameSC": "Seychellen",
+ "countryNameNL": "Niederlande",
+ "countryNameUM": "Kleinere Amerikanische Überseeinseln",
+ "countryNameIM": "Insel Man",
+ "countryNameFJ": "Fidschi",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "Vereinigtes Königreich",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slowenien",
+ "countryNameAM": "Armenien",
+ "countryNameAR": "Argentinien",
+ "countryNamePM": "St. Pierre und Miquelon",
+ "countryNameTF": "Französische Süd- und Antarktisgebiete",
+ "countryNameDO": "Dominikanische Republik",
+ "countryNameZW": "Simbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "Zentralafrikanische Republik",
+ "countryNameBE": "Belgien",
+ "countryNameKM": "Komoren",
+ "countryNameLY": "Libyen",
+ "countryNameIE": "Irland",
+ "countryNameKP": "Nordkorea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slowakei",
+ "countryNameTC": "Turks- und Caicosinseln",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Jemen",
+ "countryNameBA": "Bosnien und Herzegowina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Irak",
+ "countryNameSJ": "Spitzbergen und Jan Mayen Inseln",
+ "countryNameAX": "Ålandinseln",
+ "countryNameKE": "Kenia",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Färöer",
+ "countryNameBL": "St. Barthélemy",
+ "countryNameLB": "Libanon",
+ "countryNameJM": "Jamaika",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Spanien",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapur",
+ "countryNameAL": "Albanien",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d'Ivoire",
+ "countryNameTW": "Taiwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cookinseln",
+ "countryNameTH": "Thailand",
+ "countryNameHM": "Heard und McDonaldinseln",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "Vereinigte Staaten",
+ "countryNameAT": "Österreich",
+ "countryNameKR": "Republik Korea",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Dänemark",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Äthiopien",
+ "countryNameMG": "Madagaskar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxemburg",
+ "countryNameQA": "Katar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Solomonen",
+ "countryNameAE": "Vereinigte Arabische Emirate",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua und Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Ungarn",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Schweiz",
+ "countryNamePN": "Pitcairninseln",
+ "countryNameGL": "Grönland",
+ "countryNamePH": "Philippinen",
+ "countryNameMT": "Malta",
+ "countryNameKN": "St. Kitts und Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Lettland",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Autor",
+ "template": "Name der Vorlage"
+ },
+ "Row": {
+ "ariaLabel": "Zeile {0} von{1} Spalte {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Starten Sie ganz neu, und wählen Sie die gewünschten Eigenschaften aus der Bibliothek der verfügbaren Bestandseigenschaften aus."
+ },
+ "SettingsCatalog": {
+ "subtitle": "Starten Sie ganz neu, und wählen Sie die gewünschten Einstellungen aus der Bibliothek der verfügbaren Einstellungen aus.",
+ "title": "Einstellungskatalog"
+ },
+ "Templates": {
+ "subtitle": "Vorlagen enthalten Gruppen von Einstellungen, die nach Funktionalität angeordnet sind. Verwenden Sie eine Vorlage, wenn Sie Richtlinien nicht manuell erstellen oder Geräte für den Zugriff auf Unternehmensnetzwerke konfigurieren möchten, z. B. durch das Konfigurieren von WLAN oder VPN.",
+ "title": "Vorlagen"
+ },
+ "noData": "Keine Richtlinienvorlagen gefunden."
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Von der Microsoft Edge-App empfohlene SmartScreen-Einstellungen: Windows 10 in der Cloudkonfigurationsvorlage. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Endpunkterkennung und -antwort"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "App- und Browserisolierung",
+ "aSRApplicationControl": "Anwendungssteuerung",
+ "aSRAttackSurfaceReduction": "Regeln zur Verringerung der Angriffsfläche",
+ "aSRDeviceControl": "Gerätesteuerung",
+ "aSRExploitProtection": "Exploit-Schutz",
+ "aSRWebProtection": "Webschutz (Microsoft Edge-Legacyversion)",
+ "aVExclusions": "Microsoft Defender Antivirus-Ausschlüsse",
+ "antivirus": "Microsoft Defender Antivirus",
+ "cloudPC": "Windows 365-Sicherheitsbaseline",
+ "default": "Endpunktsicherheit",
+ "defenderTest": "Microsoft Defender für Endpunkt-Demo",
+ "diskEncryption": "BitLocker",
+ "eDR": "Endpunkterkennung und -antwort",
+ "edgeSecurityBaseline": "Microsoft Edge-Baseline",
+ "edgeSecurityBaselinePreview": "Vorschau: Microsoft Edge-Baseline",
+ "editionUpgradeConfiguration": "Editionsupgrade und Moduswechsel",
+ "firewall": "Windows-Firewall",
+ "firewallRules": "Windows-Firewallregeln",
+ "identityProtection": "Kontoschutz",
+ "identityProtectionPreview": "Kontoschutz (Vorschau)",
+ "mDMSecurityBaseline1810": "MDM-Sicherheitsbaseline für Windows 10 und höher für Oktober 2018",
+ "mDMSecurityBaseline1810Preview": "Vorschau: MDM-Sicherheitsbaseline für Windows 10 und höher für Oktober 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Vorschau: MDM-Sicherheitsbaseline für Windows 10 für Oktober 2018 (Beta)",
+ "mDMSecurityBaseline1906": "MDM-Sicherheitsbaseline für Windows 10 und höher für Mai 2019",
+ "mDMSecurityBaseline2004": "MDM-Sicherheitsbaseline für Windows 10 und höher für August 2020",
+ "mDMSecurityBaseline2101": "MDM-Sicherheitsbaseline für Windows 10 und höher Dezember 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS-Firewall",
+ "microsoftDefenderBaseline": "Microsoft Defender für Endpunkt-Baseline",
+ "office365Baseline": "Microsoft Office O365-Baseline",
+ "office365BaselinePreview": "Vorschau: Microsoft Office O365-Baseline",
+ "securityBaselines": "Sicherheitsbaselines",
+ "test": "Testvorlage",
+ "testFirewallRulesSecurityTemplateName": "Windows-Firewallregeln (Test)",
+ "testIdentityProtectionSecurityTemplateName": "Kontoschutz (Test)",
+ "windowsSecurityExperience": "Windows-Sicherheitsfunktionalität"
+ },
+ "Firewall": {
+ "mDE": "Windows-Firewall"
+ },
+ "FirewallRules": {
+ "mDE": "Windows-Firewallregeln"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "OneDrive-Einstellungen für die Verschiebung bekannter Ordner: Windows 10 in der Cloudkonfigurationsvorlage. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Kontoschutz",
+ "administrativeTemplates": "Administrative Vorlagen",
+ "androidCompliancePolicy": "Android-Kompatibilitätsrichtlinie",
+ "aospDeviceOwnerCompliancePolicy": "Android-Konformitätsrichtlinie (AOSP)",
+ "applicationControl": "App Control for Business",
+ "attackSurfaceReductionRules": "Regeln zur Verringerung der Angriffsfläche",
+ "bitlocker": "BitLocker",
+ "custom": "Benutzerdefiniert",
+ "deliveryOptimization": "Übermittlungsoptimierung",
+ "derivedPersonalIdentityVerificationCredential": "Abgeleitete Anmeldeinformation",
+ "deviceControl": "Gerätesteuerung",
+ "deviceFeatures": "Gerätefunktionen",
+ "deviceFirmwareConfigurationInterface": "Schnittstelle zur Konfiguration der Gerätefirmware",
+ "deviceLock": "Gerätesperre",
+ "deviceOwner": "Vollständig verwaltetes, dediziertes und unternehmenseigenes Arbeitsprofil",
+ "deviceRestrictions": "Geräteeinschränkungen",
+ "deviceRestrictionsWindows10Team": "Geräteeinschränkungen (Windows 10 Team)",
+ "domainJoinPreview": "Domänenbeitritt",
+ "editionUpgradeAndModeSwitch": "Editionsupgrade und Moduswechsel",
+ "education": "Bildung",
+ "email": "E-Mail",
+ "emailSamsungKnoxOnly": "E-Mail (nur Samsung KNOX)",
+ "endpointProtection": "Endpoint Protection",
+ "expeditedCheckin": "Konfiguration der Verwaltung mobiler Geräte",
+ "exploitProtection": "Exploit-Schutz",
+ "extensions": "Erweiterungen",
+ "hardwareConfigurations": "BIOS-Konfigurationen und andere Einstellungen",
+ "identityProtection": "Identitätsschutz",
+ "iosCompliancePolicy": "iOS-Konformitätsrichtlinie",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Lokale Benutzergruppenmitgliedschaft",
+ "macCompliancePolicy": "Mac-Kompatibilitätsrichtlinie",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Sicherheitsbaseline für Microsoft 365 Apps for Enterprise",
+ "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus-Ausschlüsse",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender für Endpunkt (Desktopgeräte, auf denen Windows 10 oder höher ausgeführt wird)",
+ "microsoftDefenderFirewallRules": "Windows-Firewallregeln",
+ "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint-Sicherheitsbaseline",
+ "microsoftEdgeBaseline": "Sicherheitsbaseline für Microsoft Edge",
+ "mxProfileZebraOnly": "MX-Profil (nur Zebra)",
+ "networkBoundary": "Netzwerkgrenze",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Gruppenrichtlinie außer Kraft setzen",
+ "pkcsCertificate": "PKCS-Zertifikat",
+ "pkcsImportedCertificate": "Importiertes PKCS-Zertifikat",
+ "preferenceFile": "Einstellungsdatei",
+ "presets": "Voreinstellungen",
+ "scepCertificate": "SCEP-Zertifikat",
+ "secureAssessmentEducation": "Sicheres Assessment (Education)",
+ "securityBaselineForHololens2Advanced": "Erweiterte Sicherheitsbaseline für HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standardsicherheitsbaseline für HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Sicherheitsbaseline für Microsoft Edge",
+ "settingsCatalog": "Einstellungskatalog",
+ "sharedMultiUserDevice": "Freigegebenes, von mehreren Benutzern verwendetes Gerät",
+ "softwareUpdates": "Softwareupdates",
+ "trustedCertificate": "Vertrauenswürdiges Zertifikat",
+ "unknown": "Unbekannt",
+ "unsupported": "Nicht unterstützt",
+ "vpn": "VPN",
+ "wiFi": "WLAN",
+ "wiFiImport": "WLAN (Import)",
+ "windows10CompliancePolicy": "Windows 10/11-Konformitätsrichtlinie",
+ "windows10MobileCompliancePolicy": "Windows 10 Mobile-Kompatibilitätsrichtlinie",
+ "windows10XScep": "SCEP-Zertifikat: TEST",
+ "windows10XTrustedCertificate": "Vertrauenswürdiges Zertifikat: TEST",
+ "windows10XVPN": "VPN: TEST",
+ "windows10XWifi": "WLAN: TEST",
+ "windows11SecurityBaseline": "Sicherheitsbaseline für Windows 10 und höher",
+ "windows365SecurityBaseline": "Windows 365-Sicherheitsbaseline",
+ "windows8CompliancePolicy": "Windows 8-Kompatibilitätsrichtlinie",
+ "windowsHealthMonitoring": "Windows-Integritätsüberwachung",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Windows Phone-Kompatibilitätsrichtlinie",
+ "windowsUpdateforBusiness": "Windows Update for Business",
+ "wiredNetwork": "Kabelgebundenes Netzwerk",
+ "workProfile": "Arbeitsprofil \"Persönliches Eigentum\""
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Update schrittweise verfügbar machen",
+ "immediateStart": "Update so bald wie möglich verfügbar machen",
+ "startDateOnly": "Update an einem bestimmten Datum verfügbar machen"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Automatisch ablehnen",
+ "autoGrant": "Automatisch zulassen",
+ "prompt": "Eingabeaufforderung"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Standortzugriff (grob)",
+ "accessFineLocation": "Standortzugriff (fein)",
+ "addVoicemail": "Voicemail hinzufügen",
+ "bodySensors": "Body Sensor-Informationen zulassen",
+ "bodySensorsBackground": "Körpersensordaten im Hintergrund zulassen",
+ "callPhone": "Telefonieren",
+ "camera": "Kamera",
+ "getAccounts": "Konten abrufen",
+ "nearbyDevices": "Geräte in der Nähe",
+ "nearbyWifiDevices": "WLAN-Geräte in der Nähe",
+ "postNotifications": "Benachrichtigungen posten",
+ "processOutgoingCalls": "Ausgehende Anrufe verarbeiten",
+ "readCalendar": "Kalender (lesen)",
+ "readCallLog": "Anrufprotokoll (lesen)",
+ "readContacts": "Kontakte (lesen)",
+ "readExternalStorage": "Externer Speicher (lesen)",
+ "readMediaAudio": "Medienaudio (lesen)",
+ "readMediaImages": "Medienbilder (lesen)",
+ "readMediaVideo": "Medienvideo (lesen)",
+ "readPhoneState": "Telefonstatus (lesen)",
+ "readSMS": "SMS (lesen)",
+ "receiveMMS": "MMS (empfangen)",
+ "receiveSMS": "SMS (empfangen)",
+ "receiveWAPPush": "WAP-Pushnachrichten (empfangen)",
+ "recordAudio": "Audio aufzeichnen",
+ "sendSMS": "SMS (senden)",
+ "useSIP": "SIP-Dienst verwenden",
+ "writeCalendar": "Kalender (schreiben)",
+ "writeCallLog": "Anrufprotokoll (schreiben)",
+ "writeContacts": "Kontakte (schreiben)",
+ "writeExternalStorage": "Externer Speicher (schreiben)"
+ },
+ "RemoveDialog": {
+ "description": "Möchten Sie die Berechtigung entfernen?",
+ "title": "Entfernen"
+ },
+ "TableHeader": {
+ "permission": "Berechtigung",
+ "permissionGroup": "Berechtigungsgruppe",
+ "permissionName": "Berechtigungsname",
+ "permissionState": "Berechtigungszustand"
+ },
+ "addButtonLabel": "+ Hinzufügen",
+ "addPermissionTableDescription": "Hiermit geben Sie Berechtigungen an, die Sie außer Kraft setzen möchten. Wenn sie nicht ausgewählt/explizit angegeben werden, wird das Standardverhalten angewendet.",
+ "addPermissionsTitle": "Berechtigungen hinzufügen",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Weitere Informationen zu Android-Laufzeitberechtigungen",
+ "permissionTableDescription": "Die hier erteilten Berechtigungen setzen die Richtlinie \"Standardmäßige App-Berechtigungen\" für die ausgewählten Apps außer Kraft.",
+ "permissionsTitle": "Berechtigungen"
+ },
+ "AssignmentAction": {
+ "exclude": "Ausgeschlossen",
+ "include": "Enthalten",
+ "includeAllDevicesVirtualGroup": "Enthalten",
+ "includeAllUsersVirtualGroup": "Enthalten"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search als Standard",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype for Business",
+ "oneDrive": "OneDrive-Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "Die Datei oder der Ordner als ausgewählte Anforderung.",
+ "pathToolTip": "Der vollständige Pfad der Datei oder des Ordners, die bzw. der erkannt werden soll.",
+ "property": "Eigenschaft",
+ "valueToolTip": "Wählen Sie einen Anforderungswert aus, der der ausgewählten Erkennungsmethode entspricht. Die Datums- und die Zeitanforderung müssen im lokalen Format eingegeben werden."
+ },
+ "GridColumns": {
+ "pathOrScript": "Pfad/Skript",
+ "type": "Typ"
+ },
+ "Registry": {
+ "keyPath": "Schlüsselpfad",
+ "keyPathTooltip": "Der vollständige Pfad des Registrierungseintrags mit dem Wert als Anforderung.",
+ "operator": "Operator",
+ "operatorTooltip": "Wählen Sie den Operator für den Vergleich aus.",
+ "registryRequirement": "Registrierungsschlüsselanforderung",
+ "registryRequirementTooltip": "Wählen Sie den Registrierungsschlüssel-Anforderungsvergleich aus.",
+ "valueName": "Wertname",
+ "valueNameTooltip": "Der Name des erforderlichen Registrierungswerts."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Datei",
+ "registry": "Registrierung",
+ "script": "Skript"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Boolescher Wert",
+ "dateTime": "Datum und Uhrzeit",
+ "float": "Gleitkomma",
+ "integer": "Ganze Zahl",
+ "string": "Zeichenfolge",
+ "version": "Version"
+ },
+ "duplicateName": "Der Skriptname \"{0}\" wird bereits verwendet. Geben Sie einen anderen Namen ein.",
+ "enforceSignatureCheck": "Skriptsignaturprüfung erzwingen",
+ "enforceSignatureCheckTooltip": "Wählen Sie \"Ja\" aus, um sicherzustellen, dass das Skript von einem vertrauenswürdigen Herausgeber signiert ist, damit das Skript ohne Warnungen oder Eingabeaufforderungen ausgeführt werden kann. Das Skript wird ohne Blockierung ausgeführt. Wählen Sie \"Nein\" (Standardeinstellung) aus, um das Skript mit Benutzerbestätigung, aber ohne Signaturüberprüfung auszuführen.",
+ "loggedOnCredentials": "Dieses Skript mit den Anmeldeinformationen des angemeldeten Benutzers ausführen",
+ "loggedOnCredentialsTooltip": "Führen Sie das Skript mit den Anmeldeinformationen des angemeldeten Geräts aus.",
+ "operatorTooltip": "Wählen Sie den Operator für den Anforderungsvergleich aus.",
+ "requirementMethod": "Ausgabedatentyp auswählen",
+ "requirementMethodTooltip": "Wählen Sie den Datentyp aus, der beim Ermitteln einer Anforderung zur Erkennungsübereinstimmung verwendet wird.",
+ "scriptContent": "Skriptinhalt",
+ "scriptFile": "Skriptdatei",
+ "scriptFileTooltip": "Wählen Sie ein PowerShell-Skript aus, mit dem das Vorhandensein der App auf dem Client erkannt wird. Wenn die App erkannt wird, stellt der Anforderungsprozess einen Exitcode mit dem Wert 0 bereit und schreibt einen Zeichenfolgenwert in STDOUT.",
+ "scriptName": "Skriptname",
+ "value": "Wert",
+ "valueTooltip": "Wählen Sie einen Anforderungswert aus, der der ausgewählten Erkennungsmethode entspricht. Die Datums- und die Zeitanforderung müssen im lokalen Format eingegeben werden."
+ },
+ "bladeTitle": "Anforderungsregel hinzufügen",
+ "createRequirementHeader": "Erstellen Sie eine Anforderung.",
+ "header": "Konfigurieren Sie zusätzliche Anforderungsregeln.",
+ "label": "Zusätzliche Anforderungsregeln",
+ "noRequirementsSelectedPlaceholder": "Keine Anforderungen angegeben.",
+ "requirementType": "Anforderungstyp",
+ "requirementTypeTooltip": "Wählen Sie den Typ der Erkennungsmethode aus, die festlegt, wie eine Anforderung überprüft wird."
+ },
+ "architectures": "Betriebssystemarchitektur",
+ "architecturesTooltip": "Wählen Sie die Architekturen aus, die zum Installieren der App benötigt werden.",
+ "bladeTitle": "Anforderungen",
+ "diskSpace": "Erforderlicher Speicherplatz (MB)",
+ "diskSpaceTooltip": "Der benötigte freie Speicherplatz auf dem Systemlaufwerk zum Installieren der App.",
+ "header": "Geben Sie die Anforderungen an, die Geräte vor dem Installieren der App erfüllen müssen:",
+ "maximumTextFieldValue": "Der Wert darf höchstens {0} betragen.",
+ "minimumCpuSpeed": "Mindestens erforderliche CPU-Geschwindigkeit (MHz)",
+ "minimumCpuSpeedTooltip": "Die mindestens erforderliche CPU-Geschwindigkeit zum Installieren der App.",
+ "minimumLogicalProcessors": "Mindestens erforderliche Anzahl logischer Prozessoren",
+ "minimumLogicalProcessorsTooltip": "Die mindestens erforderliche Anzahl logischer Prozessoren zum Installieren der App.",
+ "minimumOperatingSystem": "Mindestens erforderliches Betriebssystem",
+ "minimumOperatingSystemTooltip": "Wählen Sie das mindestens erforderliche Betriebssystem zum Installieren der App aus.",
+ "minumumTextFieldValue": "Der Wert muss mindestens {0} sein.",
+ "physicalMemory": "Erforderlicher physischer Speicher (MB)",
+ "physicalMemoryTooltip": "Erforderlicher physischer Arbeitsspeicher (RAM) zum Installieren der App.",
+ "selectorLabel": "Anforderungen",
+ "validNumber": "Geben Sie eine gültige Zahl ein."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filter",
+ "assignmentFilterTypeColumnHeader": "Filtermodus",
+ "assignmentToast": "Endbenutzerbenachrichtigungen",
+ "assignmentTypeTableHeader": "ZUWEISUNGSTYP",
+ "autoUpdate": "Automatische Aktualisierung",
+ "deadlineTimeColumnLabel": "Installationsstichtag",
+ "deliveryOptimizationPriorityHeader": "Priorität der Übermittlungsoptimierung",
+ "groupTableHeader": "Gruppe",
+ "installContextLabel": "Installationskontext",
+ "isRemovable": "Als entfernbare App installieren",
+ "licenseTypeLabel": "Lizenztyp",
+ "modeTableHeader": "Gruppenmodus",
+ "policySet": "Richtliniensatz",
+ "preventAutoAppUpdate": "Automatische App-Updates verhindern",
+ "preventManagedAppBackup": "iCloud-App-Sicherung verhindern",
+ "restartGracePeriodHeader": "Kulanzzeitraum neu starten",
+ "startTimeColumnLabel": "Verfügbarkeit",
+ "tracks": "Nachverfolgungen",
+ "uninstallOnRemoval": "Bei Entfernung des Geräts deinstallieren",
+ "updateMode": "Updatepriorität",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD-Web-App",
+ "androidEnterpriseSystemApp": "Android Enterprise-System-App",
+ "androidForWorkApp": "Verwaltete Google Play Store-App",
+ "androidLobApp": "Branchenspezifische Android-App",
+ "androidStoreApp": "Android Store-App",
+ "builtInAndroid": "Integrierte Android-App",
+ "builtInApp": "Integrierte App",
+ "builtInIos": "Integrierte iOS-App",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "Branchenspezifische iOS-App",
+ "iosStoreApp": "iOS Store-App",
+ "iosVppApp": "iOS Volume Purchase Program-App",
+ "lineOfBusinessApp": "Branchenspezifische App",
+ "macOSDmgApp": "macOS-App (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Branchenspezifische macOS-App",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office Suite",
+ "macOSPkgApp": "macOS-App (PKG)",
+ "macOSWebClip": "macOS-Webclip",
+ "macOsVppApp": "macOS-Volume Purchase Program-App",
+ "managedAndroidLobApp": "Verwaltete branchenspezifische Android-App",
+ "managedAndroidStoreApp": "Verwaltete Android Store-App",
+ "managedGooglePlayApp": "Verwaltete Google Play Store-App",
+ "managedGooglePlayPrivateApp": "Private verwaltete Google Play-App",
+ "managedGooglePlayWebApp": "Weblink für verwaltetes Google Play",
+ "managedIosLobApp": "Verwaltete branchenspezifische iOS-App",
+ "managedIosStoreApp": "Verwaltete iOS Store-App",
+ "microsoftStoreForBusinessApp": "Microsoft Store für Unternehmen-App",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store für Unternehmen",
+ "officeAddIn": "Office-Add-In",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 und höher)",
+ "sharePointApp": "SharePoint-App",
+ "teamsApp": "Teams-App",
+ "webApp": "Weblink",
+ "win32CatalogApp": "Windows-Katalog-App (Win32)",
+ "winGetPublicApp": "Community-Repository des Windows-Paket-Managers",
+ "winGetStoreApp": "Microsoft Store-App (neu)",
+ "windowsAppXLobApp": "Branchenspezifische Windows-APPX-App",
+ "windowsClassicApp": "Windows-App (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 und höher)",
+ "windowsMobileMsiLobApp": "Branchenspezifische Windows MSI-App",
+ "windowsPhone81AppXBundleLobApp": "Branchenspezifische Windows Phone 8.1-APPX-App",
+ "windowsPhone81AppXLobApp": "Branchenspezifische Windows Phone 8.1-APPX-App",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 Store-App",
+ "windowsPhoneXapLobApp": "Branchenspezifische Windows Phone-XAP-App",
+ "windowsStoreApp": "Microsoft Store-App (Legacy)",
+ "windowsUniversalAppXLobApp": "Branchenspezifische Windows Universal-APPX-App",
+ "windowsUniversalLobApp": "Branchenspezifische Windows Universal-App",
+ "windowsWebApp": "Windows-Weblink"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Ausgeschlossen",
+ "include": "Enthalten",
+ "includeAllDevicesVirtualGroup": "Enthalten",
+ "includeAllUsersVirtualGroup": "Enthalten"
+ },
+ "AssignmentToast": {
+ "hideAll": "Alle Popupbenachrichtigungen ausblenden",
+ "showAll": "Alle Popupbenachrichtigungen anzeigen",
+ "showReboot": "Popupbenachrichtigungen für Computerneustarts anzeigen"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Ja",
+ "notConfigured": "Nein"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Hintergrund",
+ "displayText": "Inhaltsdownload in {0}",
+ "foreground": "Vordergrund",
+ "header": "Priorität der Übermittlungsoptimierung"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "App-Installation kann einen Geräteneustart erzwingen",
+ "basedOnReturnCode": "Verhalten auf Grundlage von Rückgabecodes bestimmen",
+ "force": "Intune erzwingt einen verbindlichen Geräteneustart",
+ "suppress": "Keine bestimmte Aktion"
+ },
+ "FilterType": {
+ "exclude": "Ausschließen",
+ "include": "Einschließen",
+ "none": "Keine"
+ },
+ "InstallIntent": {
+ "available": "Für registrierte Geräte verfügbar",
+ "availableWithoutEnrollment": "Verfügbar mit oder ohne Registrierung",
+ "notApplicable": "Nicht zutreffend",
+ "required": "Erforderlich",
+ "uninstall": "Deinstallieren"
+ },
+ "SettingType": {
+ "assignmentType": "Zuweisungstyp",
+ "deviceLicensing": "Lizenztyp",
+ "installContext": "Bei Entfernung des Geräts deinstallieren",
+ "toastSettings": "Endbenutzerbenachrichtigungen",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Standard",
+ "postponed": "Zurückgestellt",
+ "priority": "Hohe Priorität"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Fehler",
+ "hardReboot": "Harter Neustart",
+ "retry": "Wiederholen",
+ "softReboot": "Warmneustart",
+ "success": "Erfolgreich"
+ },
+ "Columns": {
+ "codeType": "Codetyp",
+ "returnCode": "Rückgabecode"
+ },
+ "bladeTitle": "Rückgabecodes",
+ "gridAriaLabel": "Rückgabecodes",
+ "header": "Geben Sie Rückgabecodes an, um das Verhalten nach der Installation festzulegen:",
+ "onAddAnnounceMessage": "Der Rückgabecode hat Element {0} von {1} hinzugefügt.",
+ "onDeleteSuccess": "Der Rückgabecode {0} wurde erfolgreich gelöscht.",
+ "returnCodeAlreadyUsedValidation": "Der Rückgabecode wird bereits verwendet.",
+ "returnCodeMustBeIntegerValidation": "Der Rückgabecode muss eine ganze Zahl sein.",
+ "returnCodeShouldBeAtLeast": "Der Rückgabecode muss mindestens {0} lauten.",
+ "returnCodeShouldBeAtMost": "Der Rückgabecode darf maximal {0} lauten.",
+ "selectorLabel": "Rückgabecodes"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone und iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Netzwerkgrenze hinzufügen",
+ "addNetworkBoundaryButton": "Netzwerkgrenze hinzufügen...",
+ "allowWindowsSearch": "Die Suche nach verschlüsselten Daten und Store-Apps durch Windows Search zulassen",
+ "authoritativeIpRanges": "Liste der Unternehmens-IP-Bereiche ist autoritativ (keine automatische Erkennung)",
+ "authoritativeProxyServers": "Liste der Unternehmensproxyserver ist autoritativ (keine automatische Erkennung)",
+ "boundaryType": "Grenztyp",
+ "cloudResources": "Cloudressourcen",
+ "corporateIdentity": "Unternehmensidentität",
+ "dataRecoveryCert": "Laden Sie ein DRA-Zertifikat hoch, um die Wiederherstellung verschlüsselter Daten zuzulassen.",
+ "editNetworkBoundary": "Netzwerkgrenze bearbeiten",
+ "enrollmentState": "Registrierungsstatus",
+ "iPv4Ranges": "IPv4-Bereiche",
+ "iPv6Ranges": "IPv6-Bereiche",
+ "internalProxyServers": "Interne Proxyserver",
+ "maxInactivityTime": "Die maximal zulässige Zeit (in Minuten) nach dem Wechsel des Gerät in den Leerlauf, bis das Gerät durch die PIN oder ein Kennwort gesperrt wird",
+ "maxPasswordAttempts": "Zulässige Anzahl von Authentifizierungsfehlern, bevor das Gerät zurückgesetzt wird",
+ "mdmDiscoveryUrl": "URL für MDM-Ermittlung",
+ "mdmRequiredSettingsInfo": "Diese Richtlinie gilt nur für die Windows 10 Anniversary-Edition und höher. Diese Richtlinie verwendet Windows Information Protection (WIP) zum Anwenden von Schutz.",
+ "minimumPinLength": "Legen Sie die für die PIN erforderliche Mindestanzahl an Zeichen fest.",
+ "name": "Name",
+ "networkBoundariesGridEmptyText": "Hier werden alle von Ihnen hinzugefügten Netzwerkgrenzen angezeigt.",
+ "networkBoundary": "Netzwerkgrenze",
+ "networkDomainNames": "Netzwerkdomänen",
+ "neutralResources": "Neutrale Ressourcen",
+ "passportForWork": "Verwenden Sie Windows Hello for Business als Methode zum Anmelden bei Windows.",
+ "pinExpiration": "Geben Sie den Zeitraum (in Tagen) an, für den eine PIN verwendet werden kann, bevor das System den Benutzer zur Änderung auffordert.",
+ "pinHistory": "Geben Sie die Anzahl der letzten PINs an, die einem Benutzerkonto zugeordnet und nicht wiederverwendet werden können.",
+ "pinLowercaseLetters": "Konfigurieren Sie die Verwendung von Kleinbuchstaben in der Windows Hello for Business-PIN.",
+ "pinSpecialCharacters": "Konfigurieren Sie die Verwendung von Sonderzeichen in der Windows Hello for Business-PIN.",
+ "pinUppercaseLetters": "Konfigurieren Sie die Verwendung von Großbuchstaben in der Windows Hello for Business-PIN.",
+ "protectUnderLock": "App-Zugriff auf Unternehmensdaten verhindern, wenn das Gerät gesperrt ist (gilt nur für Windows 10 Mobile)",
+ "protectedDomainNames": "Geschützte Domänen",
+ "proxyServers": "Proxyserver",
+ "requireAppPin": "App-PIN deaktivieren, wenn Geräte-PIN verwaltet wird",
+ "requiredSettings": "Erforderliche Einstellungen",
+ "requiredSettingsInfo": "Durch das Ändern des Bereichs oder das Entfernen dieser Richtlinie werden die Unternehmensdaten entschlüsselt.",
+ "revokeOnMdmHandoff": "Zugriff auf geschützte Daten widerrufen, wenn das Gerät bei MDM registriert wird",
+ "revokeOnUnenroll": "Beim Aufheben der Registrierung Verschlüsselungsschlüssel widerrufen",
+ "rmsTemplateForEdp": "Geben Sie die Vorlagen-ID zur Verwendung für Azure RMS an.",
+ "showWipIcon": "Zeigen Sie das Datenschutzsymbol des Unternehmens an.",
+ "type": "Typ",
+ "useRmsForWip": "Verwenden Sie Azure RMS für WIP.",
+ "value": "Wert",
+ "weRequiredSettingsInfo": "Diese Richtlinie gilt nur für Windows 10 Creators Update und höher. Diese Richtlinie verwendet Windows Information Protection (WIP) und Windows MAM zum Anwenden von Schutz.",
+ "wipProtectionMode": "Windows Information Protection-Modus",
+ "withEnrollment": "Mit Registrierung",
+ "withoutEnrollment": "Ohne Registrierung"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabisch",
+ "bulgarian": "Bulgarisch",
+ "chineseSimplified": "Chinesisch (vereinfacht)",
+ "chineseTraditional": "Chinesisch (traditionell)",
+ "croatian": "Kroatisch",
+ "czech": "Tschechisch",
+ "danish": "Dänisch",
+ "dutch": "Niederländisch",
+ "englishUK": "Englisch (Vereinigtes Königreich)",
+ "englishUS": "Englisch (USA)",
+ "estonian": "Estnisch",
+ "finnish": "Finnisch",
+ "frenchCanada": "Französisch (Kanada)",
+ "frenchFrance": "Französisch (Frankreich)",
+ "german": "Deutsch",
+ "greek": "Griechisch",
+ "hebrew": "Hebräisch",
+ "hungarian": "Ungarisch",
+ "italian": "Italienisch",
+ "japanese": "Japanisch",
+ "korean": "Koreanisch",
+ "latvian": "Lettisch",
+ "lithuanian": "Litauisch",
+ "norwegian": "Norwegisch (Bokmål)",
+ "polish": "Polnisch",
+ "portugueseBrazil": "Portugiesisch (Brasilien)",
+ "portuguesePortugal": "Portugiesisch (Portugal)",
+ "romanian": "Rumänisch",
+ "russian": "Russisch",
+ "serbian": "Serbisch",
+ "slovak": "Slowakisch",
+ "slovenian": "Slowenisch",
+ "spanishMexico": "Spanisch (Mexiko)",
+ "spanishSpain": "Spanisch (Spanien)",
+ "swedish": "Schwedisch",
+ "thai": "Thailand",
+ "turkish": "Türkisch",
+ "ukrainian": "Ukrainisch"
+ },
+ "Summary": {
+ "placeholder": "Wählen Sie links eine Benachrichtigungsmeldung aus, um eine Vorschau der Inhalte anzuzeigen."
+ },
+ "companyContact": "Kontaktinformationen anzeigen",
+ "companyLogo": "Firmenlogo anzeigen",
+ "companyName": "Firmennamen anzeigen",
+ "createEditDescription": "Erstellen oder bearbeiten Sie Vorlagen für Benachrichtigungs-E-Mails.",
+ "createMessage": "Nachricht erstellen",
+ "deviceDetails": "Gerätedetails anzeigen",
+ "deviceDetailsInfoBox": "Diese Einstellung ist standardmäßig deaktiviert, da das Abrufen von Gerätedetails zu einer Verzögerung beim Empfang von E-Mail-Benachrichtigungen führen kann.",
+ "editImpactInfo": "Die Bearbeitung dieser Vorlage für die Benachrichtigungs-E-Mail wirkt sich auf alle Richtlinien aus, die diese Vorlage verwenden.",
+ "editMessage": "Nachricht bearbeiten",
+ "email": "E-Mail",
+ "emailFooterTitle": "E-Mail-Fußzeile",
+ "emailHeaderFooterInfo": "Die Einstellungen für E-Mail-Kopf- und -Fußzeilen für E-Mail-Benachrichtigungen basieren auf Anpassungseinstellungen im Mandantenadministratorknoten im Endpoint Manager.",
+ "emailHeaderTitle": "E-Mail-Kopf",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Konfigurieren von Anpassungseinstellungen",
+ "formSubTitle": "Benachrichtigungs-E-Mails erstellen oder ändern",
+ "headerFooterSettingsTab": "Einstellungen für Kopf- und Fußzeile",
+ "imgPreview": "Bildvorschau",
+ "infotext": "Wählen Sie eine Benachrichtigungsmeldung aus. Um eine neue Benachrichtigung zu erstellen, wechseln Sie im Abschnitt \"Verwalten\" der Workload \"Gerätekompatibilität festlegen\" zu \"Benachrichtigungen\".",
+ "iwLink": "Link zur Unternehmensportalwebsite anzeigen",
+ "listEmpty": "Keine Nachrichtenvorlagen vorhanden.",
+ "listEmptySelectOnly": "Keine Nachrichtenvorlagen vorhanden. Um eine neue Benachrichtigung zu erstellen, wechseln Sie im Abschnitt \"Verwalten\" der Workload \"Gerätekompatibilität festlegen\" zu \"Benachrichtigungen\".",
+ "listSubTitle": "Liste von Vorlagen für Benachrichtigungs-E-Mails",
+ "listTitle": "Benachrichtigungsvorlagen",
+ "localizedNotificationMessageTemplates": "Vorlagen für lokalisierte Benachrichtigungsmeldungen",
+ "messageAssigned": "Diese E-Mail-Vorlage kann nicht gelöscht werden, weil sie zurzeit von mindestens einer Konformitätsrichtlinie verwendet wird.",
+ "messageCapitalized": "Benachrichtigungsvorlage",
+ "messageLowercase": "Benachrichtigungsvorlage",
+ "missingDefaultError": "Standardvorlage auswählen",
+ "notificationMessageTemplates": "Benachrichtigungsvorlagen",
+ "rowValidationError": "Es ist mindestens eine Nachrichtenvorlage erforderlich.",
+ "selectDescription": "Wählen Sie eine Benachrichtigungs-E-Mail aus. Um eine neue Benachrichtigung zu erstellen, besuchen Sie \"Benachrichtigungen\" im Abschnitt \"Verwalten\" der Workload \"Gerätekompatibilität festlegen\".",
+ "tenantValueText": "Mandantenwert",
+ "testEmailLabel": "Vorschau-E-Mail senden",
+ "localeLabel": "Gebietsschema",
+ "isDefaultLocale": "Ist Standard"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Konfigurieren Sie Geräte für die erste Bereitstellung.",
+ "title": "Gerätevorbereitung"
+ },
+ "EnrollmentSettings": {
+ "description": "Konfigurieren Sie Registrierungseinstellungen wie das Blockieren der Registrierung und das Zuweisen zu Benutzern.",
+ "title": "Registrierungseinstellungen"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Konfigurieren Sie Einstellungen, mit denen Benutzer Windows von einem startbaren Flashlaufwerk wiederherstellen können.",
+ "menuTitle": "Konfiguration der Wiederherstellung des Windows-Betriebssystems"
+ },
+ "coManagementAuthorityDesc": "Hiermit werden Co-Verwaltungseinstellungen für die Configuration Manager-Integration konfiguriert.",
+ "coManagementAuthorityTitle": "Einstellungen für die Co-Verwaltung",
+ "deploymentProfiles": "Windows AutoPilot Deployment-Profile",
+ "description": "Erfahren Sie mehr über die sieben verschiedenen Möglichkeiten, wie ein Windows 10/11-PC von Benutzern oder Administratoren bei Intune registriert werden kann.",
+ "descriptionLabel": "Windows-Registrierungsmethoden",
+ "enrollmentStatusPage": "Seite \"Registrierungsstatus\""
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Wählen Sie die Anzahl von Bits aus, die im Schlüssel enthalten sein sollen.",
+ "keyUsage": "Geben Sie die kryptografische Aktion an, die zum Austauschen des öffentlichen Schlüssels des Zertifikats erforderlich ist.",
+ "renewalThreshold": "Geben Sie den Prozentsatz (zwischen 1 und 99 Prozent) der verbleibenden Gültigkeitsdauer des Zertifikats an, die zulässig ist, bevor ein Gerät die Verlängerung des Zertifikats anfordern kann. Der empfohlene Wert in Intune beträgt 20 %. (1–99)",
+ "rootCert": "Wählen Sie ein zuvor konfiguriertes und zugeordnetes Profil für das Stammzertifizierungsstellen-Zertifikat aus. Das Zertifizierungsstellenzertifikat muss mit dem Stammzertifikat der Zertifizierungsstelle übereinstimmen, die das Zertifikat für dieses Profil (das Sie gerade konfigurieren) ausstellt.",
+ "scepServerUrl": "Geben Sie eine URL für den NDES-Server ein, der Zertifikate über SCEP ausgibt (HTTPS erforderlich). Beispiel: https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Fügen Sie mindestens eine URL für den NDES-Server hinzu, der Zertifikate über SCEP ausstellt (HTTPS erforderlich). Beispiel: https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Alternativer Antragstellername",
+ "subjectNameFormat": "Format des Antragstellernamens",
+ "validityPeriod": "Die verbleibende Zeit vor Ablauf des Zertifikats. Geben Sie einen Wert ein, der gleich oder kleiner ist als der Gültigkeitszeitraum, der in der Zertifikatvorlage angezeigt wird. Standardmäßig ist ein Jahr festgelegt."
+ },
+ "appInstallContext": "Hiermit wird der Installationskontext für diese App angegeben. Wählen Sie für Apps im dualen Modus den gewünschten Kontext für die App aus. Für alle weiteren Apps wird diese Einstellung basierend auf dem Paket vorausgewählt und kann nicht geändert werden.",
+ "autoUpdateMode": "Konfigurieren Sie die Updatepriorität für die App. Wählen Sie \"Standard\" aus, um die Verbindung des Geräts mit WLAN zu verlangen, eine Belastung auszuführen und vor dem Aktualisieren der App nicht aktiv verwendet zu werden. Wählen Sie \"Hohe Priorität\" aus, um die App zu aktualisieren, sobald der Entwickler die App veröffentlicht hat, unabhängig vom Gebührenstatus, der WLAN-Funktion oder der Endbenutzeraktivität auf dem Gerät. Wählen Sie \"Zurückgestellt\" aus, um app-Updates für bis zu 90 Tage zu verhandeln. \"Hohe Priorität\" und \"Zurückgestellt\" werden nur auf Do-Geräten wirksam.",
+ "configurationSettingsFormat": "Text für das Konfigurationseinstellungsformat",
+ "ignoreVersionDetection": "Für Apps, die vom App-Entwickler automatisch aktualisiert werden (z. B. Google Chrome), legen Sie diese Option auf \"Ja\" fest.",
+ "ignoreVersionDetectionMacOSLobApp": "Wählen Sie \"Ja\" aus, wenn die Apps automatisch durch den App-Entwickler aktualisiert werden, oder wenn vor der Installation nur auf die App-Bundle-ID überprüft werden soll. Wählen Sie \"Nein\" aus, um vor der Installation auf die App-Bundle-ID und die Versionsnummer zu überprüfen.",
+ "installAsManagedMacOSLobApp": "Diese Einstellung gilt nur für macOS 11 und höher. Unter macOS 10.15 und früher wird die App installiert, aber nicht verwaltet.",
+ "installContextDropdown": "Wählen Sie den entsprechenden Installationskontext aus. Durch den Benutzerkontext wird die App nur für den Zielbenutzer installiert, während sie durch den Gerätekontext für alle Benutzer auf dem Gerät installiert wird.",
+ "ldapUrl": "Dies ist der LDAP-Hostname, über den Clients die öffentlichen Verschlüsselungskeys für E-Mail-Empfänger abrufen können. E-Mails werden verschlüsselt, wenn ein Key verfügbar ist. Unterstützte Formate:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Wählen Sie Laufzeitberechtigungen für die zugeordnete App.",
+ "policyAssociatedApp": "Wählen Sie die App, der diese Richtlinie zugeordnet werden soll.",
+ "policyConfigurationSettings": "Wählen Sie die Methode aus, die Sie zum Definieren von Konfigurationseinstellungen für diese Richtlinie verwenden möchten.",
+ "policyDescription": "Geben Sie optional eine Beschreibung für diese Konfigurationsrichtlinie ein.",
+ "policyEnrollmentType": "Wählen Sie aus, ob diese Einstellungen über die Geräteverwaltung oder über mit dem Intune-SDK erstellte Apps verwaltet werden.",
+ "policyName": "Geben Sie einen Namen für diese Konfigurationsrichtlinie ein.",
+ "policyPlatform": "Wählen Sie die Plattform aus, auf die diese App-Konfigurationsrichtlinie angewendet wird.",
+ "policyProfileType": "Wählen Sie die Geräteprofiltypen aus, auf die dieses App-Konfigurationsprofil angewendet werden soll.",
+ "policySMime": "Hiermit konfigurieren Sie S/MIME-Signatur- und Verschlüsselungseinstellungen für Outlook.",
+ "sMimeDeployCertsFromIntune": "Geben Sie an, ob von Intune S/MIME-Zertifikate für die Verwendung mit Outlook bereitgestellt werden sollen oder nicht.\r\nIntune kann über das Unternehmensportal automatisch Signatur- und Verschlüsselungszertifikate für Benutzer bereitstellen.",
+ "sMimeEnable": "Hiermit geben Sie an, ob S/MIME-Steuerelemente beim Verfassen einer E-Mail aktiviert werden.",
+ "sMimeEnableAllowChange": "Geben Sie an, ob der Benutzer die Einstellung \"S/MIME aktivieren\" ändern darf.",
+ "sMimeEncryptAllEmails": "Hiermit wird angegeben, ob alle E-Mails verschlüsselt werden müssen oder nicht.\r\nBei der Verschlüsselung werden Daten mithilfe eines Verschlüsselungsverfahrens konvertiert, sodass sie nur vom beabsichtigten Empfänger gelesen werden können.",
+ "sMimeEncryptAllEmailsAllowChange": "Geben Sie an, ob der Benutzer die Einstellung \"Alle E-Mails verschlüsseln\" ändern darf.",
+ "sMimeEncryptionCertProfile": "Geben Sie das Zertifikatprofil für die E-Mail-Verschlüsselung an.",
+ "sMimeSignAllEmails": "Geben Sie an, ob alle E-Mail-Nachrichten signiert werden müssen oder nicht.\r\nEine digitale Signatur weist die Echtheit der E-Mail-Adresse nach und stellt sicher, dass der Inhalt während der Übertragung nicht verändert wird.",
+ "sMimeSignAllEmailsAllowChange": "Geben Sie an, ob der Benutzer die Einstellung \"Alle E-Mails signieren\" ändern darf.",
+ "sMimeSigningCertProfile": "Geben Sie das Zertifikatprofil für die E-Mail-Signatur an.",
+ "sMimeUserNotificationType": "Das Verfahren, mit dem Benutzer darüber benachrichtigt werden, dass sie das Unternehmensportal öffnen müssen, um S/MIME-Zertifikate für Outlook abzurufen."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "\"{0}\" ist in mindestens einem Richtliniensatz enthalten. Wenn Sie \"{0}\" löschen, können Sie das Profil nicht mehr über diese Richtliniensätze zuweisen. Dennoch löschen?",
+ "contentWithError": "\"{0}\" ist möglicherweise in mindestens einem Richtliniensatz enthalten. Wenn Sie \"{0}\" löschen, können Sie sie nicht mehr über diese Richtliniensätze zuweisen. Dennoch löschen?",
+ "header": "Möchten Sie diese Einschränkung löschen?"
+ },
+ "DeviceLimit": {
+ "description": "Legt die maximale Anzahl von Geräten fest, die ein Benutzer registrieren kann.",
+ "header": "Einschränkungen zum Gerätelimit",
+ "info": "Definieren Sie, wie viele Geräte jeder Benutzer registrieren darf."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "1.0 oder höher erforderlich.",
+ "android": "Geben Sie eine gültige Versionsnummer ein. Beispiele: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Geben Sie eine gültige Versionsnummer ein. Beispiele: 5.0, 5.1.1",
+ "iOS": "Geben Sie eine gültige Versionsnummer ein. Beispiele: 9.0, 10.0, 9.0.2",
+ "mac": "Geben Sie eine gültige Versionsnummer ein. Beispiele: 10, 10.10, 10.10.1",
+ "min": "Der Mindestwert darf nicht unter {0} liegen.",
+ "minMax": "Die Mindestversion darf nicht höher als die maximale Version sein.",
+ "windows": "Version 10.0 oder höher erforderlich. Lassen Sie die Einstellung leer, um 8.1-Geräte zuzulassen.",
+ "windowsMobile": "Version 10.0 oder höher erforderlich. Lassen Sie die Einstellung leer, um 8.1-Geräte zuzulassen."
+ },
+ "allPlatformsBlocked": "Alle Geräteplattformen sind blockiert. Lassen Sie die Plattformregistrierung zu, um die Plattformkonfiguration zu aktivieren.",
+ "blockManufacturerPlaceHolder": "Herstellername",
+ "blockManufacturersHeader": "Blockierte Hersteller",
+ "cannotRestrict": "Einschränkung nicht unterstützt",
+ "configurationDescription": "Legt die Einschränkungen in Bezug auf Plattformkonfigurationen fest, die für ein Gerät erfüllt werden müssen, damit das Gerät registriert werden kann. Verwenden Sie Konformitätsrichtlinien, um Geräte nach der Registrierung einzuschränken. Definieren Sie Versionen als \"Hauptversion.Nebenversion.Build\". Versionseinschränkungen gelten nur für Geräte, die beim Unternehmensportal registriert sind. Intune stuft Geräte standardmäßig als privat ein. Um Geräte als unternehmenseigen zu klassifizieren, sind zusätzliche Aktionen erforderlich.",
+ "configurationDescriptionLabel": "Weitere Informationen zum Festlegen von Registrierungseinschränkungen",
+ "configurations": "Plattformen konfigurieren",
+ "deviceManufacturer": "Gerätehersteller",
+ "header": "Einschränkungen zum Gerätetyp",
+ "info": "Definieren Sie, welche Plattformen, Versionen und Verwaltungstypen eine Registrierung durchführen können.",
+ "manufacturer": "Hersteller",
+ "max": "Max.",
+ "maxVersion": "Höchste zulässige Version",
+ "min": "Min",
+ "minVersion": "Mindestversion",
+ "newPlatforms": "Es sind neue zugelassene Plattformen verfügbar. Erwägen Sie eine Aktualisierung der Plattformkonfigurationen.",
+ "personal": "Persönliches Eigentum",
+ "platform": "Plattform",
+ "platformDescription": "Sie können die Registrierung der folgenden Plattformen zulassen. Nur blockierte Plattformen werden nicht unterstützt. Zugelassen Plattformen können mit zusätzlichen Registrierungsbeschränkungen konfiguriert werden.",
+ "platformSettings": "Plattformeinstellungen",
+ "platforms": "Plattformen auswählen",
+ "platformsSelected": "{0} Plattformen ausgewählt",
+ "type": "Typ",
+ "versions": "Versionen",
+ "versionsRange": "Zulässiger Bereich für Mindestversion/maximale Version:",
+ "windowsTooltip": "Schränkt die Registrierung über mobile Geräteverwaltung ein. Schränkt die Installation des PC-Agents nicht ein. Nur Windows 10- und Windows 11-Versionen werden unterstützt. Lassen Sie die Versionen leer, um Windows 8.1 zuzulassen."
+ },
+ "Priority": {
+ "saved": "Die Einschränkungsprioritäten wurden erfolgreich gespeichert."
+ },
+ "Row": {
+ "announce": "Priorität: {0}, Name: {1}, zugewiesen: {2}"
+ },
+ "Table": {
+ "deployed": "Bereitgestellt",
+ "name": "Name",
+ "priority": "Priorität"
+ },
+ "Type": {
+ "limit": "Gerätelimiteinschränkung",
+ "type": "Gerätetypeinschränkung"
+ },
+ "allUsers": "Alle Benutzer",
+ "androidRestrictions": "Android-Einschränkungen",
+ "create": "Einschränkung erstellen",
+ "defaultLimitDescription": "Dies ist die Standardeinschränkung des Gerätelimits, die mit der niedrigsten Priorität unabhängig von der Gruppenmitgliedschaft auf alle Benutzer angewendet wird.",
+ "defaultTypeDescription": "Dies ist die Standardeinschränkung des Gerätetyps, die mit der niedrigsten Priorität unabhängig von der Gruppenmitgliedschaft auf alle Benutzer angewendet wird.",
+ "defaultWhfbDescription": "Dies ist die Windows Hello for Business-Standardkonfiguration, die mit der niedrigsten Priorität unabhängig von der Gruppenmitgliedschaft auf alle Benutzer angewendet wird.",
+ "deleteMessage": "Für betroffene Benutzer gilt die Einschränkung der nächsthöheren Priorität. Wenn keine weitere Einschränkung zugewiesen ist, wird die Standardeinschränkung angewendet.",
+ "deleteTitle": "Möchten Sie die Einschränkung \"{0}\" löschen?",
+ "descriptionHint": "Kurzer Absatz zur Beschreibung der Unternehmensnutzung oder der Einschränkungsebene, die durch die Einstellungen der Einschränkung definiert wird.",
+ "edit": "Einschränkung bearbeiten",
+ "info": "Ein Gerät muss die Registrierungsbeschränkungen mit der höchsten Priorität erfüllen, die dem Benutzer zugeordnet wurden. Sie können eine Gerätebeschränkung ziehen, um ihre Priorität zu ändern. Standardbeschränkungen weisen für alle Benutzer die niedrigste Priorität auf und dienen zur Steuerung benutzerloser Registrierungen. Standardbeschränkungen können bearbeitet, aber nicht gelöscht werden.",
+ "iosRestrictions": "iOS-Einschränkungen",
+ "mDM": "MDM",
+ "macRestrictions": "macOS-Einschränkungen",
+ "maxVersion": "Maximalversion",
+ "minVersion": "Mindestversion",
+ "nameHint": "Dies ist das primäre Attribut, das zur Identifikation des Einschränkungssatzes angezeigt wird.",
+ "noAssignmentsStatusBar": "Weisen Sie die Einschränkung mindestens einer Gruppe zu. Klicken Sie auf \"Eigenschaften\".",
+ "nonAdminForbiddenCreateError": "Sie müssen Administrator für den Intune-Dienst oder globaler Administrator sein, um Einschränkungen zu erstellen, zu bearbeiten oder zu löschen.",
+ "nonAdminForbiddenEdit": "Sie müssen Administrator*in sein, um Einschränkungen zu bearbeiten.",
+ "notFound": "Die Einschränkung wurde nicht gefunden. Möglicherweise wurde es bereits gelöscht.",
+ "personallyOwned": "Geräte im Privatbesitz",
+ "restriction": "Einschränkung",
+ "restrictionLowerCase": "Einschränkung",
+ "restrictionType": "Restriction Type",
+ "selectType": "Einschränkungstyp auswählen",
+ "selectValidation": "Wählen Sie eine Plattform aus.",
+ "typeHint": "Wählen Sie \"Gerätetypeinschränkung\" aus, um Geräteeigenschaften einzuschränken. Wählen Sie \"Gerätelimiteinschränkung\" aus, um die Anzahl von Geräten pro Benutzer einzuschränken.",
+ "typeRequired": "Der Einschränkungstyp ist erforderlich.",
+ "winPhoneRestrictions": "Windows Phone-Einschränkungen",
+ "windowsECv1Info": "Ältere Registrierungseinschränkungen können nicht bearbeitet oder neu priorisiert werden. Sie können nur gelöscht werden.",
+ "windowsECv2Info": "Sie können Registrierungseinschränkungen priorisieren, indem Sie sie ziehen und ablegen. Zeigen Sie die Standard- und vorkonfigurierten Einschränkungen unten an. Alle neuen Registrierungseinschränkungen haben eine höhere Priorität als Standard- und vorkonfigurierte Einschränkungen.",
+ "windowsRestrictions": "Windows-Einschränkungen",
+ "windowsRestrictionsPreview": "Filterbasierte Windows-Einschränkungen (Vorschau)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 Tag",
+ "twoDays": "2 Tage",
+ "zeroDays": "0 Tage"
+ },
+ "SecurityTemplate": {
+ "aSR": "Verringerung der Angriffsfläche",
+ "accountProtection": "Kontoschutz",
+ "allDevices": "Alle Geräte",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Antivirus-Berichterstellung (Vorschau)",
+ "conditionalAccess": "Bedingter Zugriff",
+ "deviceCompliance": "Gerätekompatibilität",
+ "diskEncryption": "Datenträgerverschlüsselung",
+ "eDR": "Endpunkterkennung und -antwort",
+ "ePM": "Verwaltung von Endpunktberechtigungen",
+ "firewall": "Firewall",
+ "helpSupport": "Hilfe und Support",
+ "setup": "Setup",
+ "wdapt": "Microsoft Defender für Endpunkt"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Datenschutzkonfiguration"
+ },
+ "OrganizeMailByThread": {
+ "title": "E-Mails nach Thread organisieren",
+ "tooltip": "Das Standardverhalten in Outlook besteht darin, E-Mail-Nachrichten zu bündeln und als Unterhaltungsthread anzuzeigen. Wenn diese Einstellung deaktiviert ist, gruppiert Outlook die E-Mails nicht, sondern zeigt jede E-Mail einzeln an."
+ },
+ "Sync": {
+ "header": "Kontaktfelder mit der App-Konfiguration für native Kontakte synchronisieren"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
+ "allowBiometricsTitle": "Biometrische Daten für App-Zugriff erforderlich",
+ "allowBiometricsTooltip": "Möglicherweise werden biometrische Daten wie z. B. TouchID oder FaceID benötigt, damit Benutzer auf die App auf ihrem Gerät zugreifen können. Sofern erforderlich, werden neben dem in diesem Profil gewählten Authentifizierungsverfahren auch biometrische Daten verwendet. Diese Einstellung darf bei der Bereitstellung von Intune-App-Schutzrichtlinien nicht aktiviert werden, weil die App-Schutzrichtlinie Zugriffsanforderungen umfasst, die vor dem Zugriff auf verwaltete Daten erfüllt werden müssen. Wenn Sie beide Optionen aktivieren, werden mehrere Aufforderungen für den Zugriff auf Outlook Mobile angezeigt. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Aus“.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
+ "allowCalendarNotificationsTitle": "Kalenderbenachrichtigungen",
+ "allowCalendarNotificationsTooltip": "Hiermit wird die Anzeige vollständiger Details in Kalenderbenachrichtigungen zugelassen, wenn die App-Schutzrichtlinieneinstellung \"Benachrichtigungen zu Organisationsdaten\" auf \"Organisationsdaten blockieren\" festgelegt ist.",
+ "allowDefaultAppSignatureTitle": "Standard-App-Signatur",
+ "allowDefaultAppSignatureTooltip": "Die Standard-App-Signatur gibt an, ob die App „Outlook für iOS herunterladen“ als Standardsignatur beim Verfassen von Nachrichten verwendet. Wenn diese Einstellung deaktiviert ist, wird die Standardsignatur nicht verwendet. Benutzer können jedoch ihre eigene Signatur hinzufügen. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Ein“.",
+ "allowExternalRecipientsMailTipTitle": "E-Mail-Info zu externen Empfängern",
+ "allowExternalRecipientsMailTipTooltip": "Die E-Mail-Info zu externen Empfängern wird angezeigt, wenn der Absender einen externen Empfänger oder eine Verteilergruppe hinzufügt, die externe Empfänger enthält. Diese E-Mail-Info informiert die Absender darüber, wenn eine verfasste Nachricht die Organisation verlässt und unterstützt sie dabei, die richtigen Entscheidungen über Wortlaut, Ton und Inhalt zu treffen. Diese Einstellung ist nur für Exchange Online-Konten und lokale Konten verfügbar, die eine hybride moderne Authentifizierung nutzen. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Ein“.",
+ "allowFocusedInboxTitle": "Posteingang mit Relevanz",
+ "allowFocusedInboxTooltip": "Der Posteingang mit Relevanz unterteilt Ihren Posteingang in zwei Registerkarten: „Relevant“ und „Sonstige“. Ihre wichtigsten E-Mails befinden sich auf der Registerkarte „Relevant“, während die übrigen Nachrichten weiterhin leicht zugänglich, aber nicht im Weg sind: auf der Registerkarte „Sonstige“. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Ein“.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
+ "allowMailNotificationsTitle": "E-Mail-Benachrichtigungen",
+ "allowMailNotificationsTooltip": "Dieser Wert gibt an, ob Outlook E-Mail-Benachrichtigungen zulässt. Durch Festlegen dieses Werts auf „Nein“ werden E-Mail-Benachrichtigungen deaktiviert.",
+ "allowOrgDataOnWearablesTitle": "Organisationsdaten auf Wearables",
+ "allowOrgDataOnWearablesTooltip": "Dieser Wert gibt an, ob Outlook-Daten mit einem Wearable synchronisiert werden können. Durch Festlegen dieses Werts auf „Nein“ wird die Synchronisierung mit Wearables deaktiviert.",
+ "allowSaveContactsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Kontaktsynchronisierungseinstellung ändern darf.",
+ "allowSaveContactsTitle": "Kontakte speichern",
+ "allowSaveContactsTooltip": "Durch das Speichern von Kontakten im nativen Adressbuch des mobilen Geräts können neue Anrufe und Textnachrichten mit den vorhandenen Outlook-Kontakten des Benutzers verknüpft werden. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die App-Standardeinstellung „Aus“.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
+ "allowSmartReplyTitle": "Vorgeschlagene Antworten",
+ "allowSmartReplyTooltip": "Wenn Sie eine Nachricht öffnen, schlägt Outlook unter der Nachricht möglicherweise Antworten vor. Wenn Sie eine vorgeschlagene Antwort auswählen, können Sie die Antwort vor dem Senden bearbeiten. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Ein“.",
+ "allowUserChangeGeneralToolTip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
+ "allowUserChangeTitle": "Benutzer das Ändern der Einstellung erlauben",
+ "blockExternalImagesAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
+ "blockExternalImagesTitle": "Externe Bilder blockieren",
+ "blockExternalImagesTooltip": "Wenn die Option „Externe Bilder blockieren“ aktiviert ist, verhindert die App das Herunterladen von im Internet gehosteten Bildern, die in den Nachrichtentext eingebettet sind. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App „Aus“.",
+ "disableAddinsTitle": "Add-Ins zulassen",
+ "disableAddinsTooltip": "Standardmäßig ermöglicht eine Appschutz-Richtlinie Benutzern die Verwendung von Drittanbieter-Add-Ins. Sie kann jedoch verwendet werden, um Add-Ins mit der Einstellung „Per Richtlinie verwaltete App-Daten mit nativen Apps synchronisieren“ zu blockieren. Wenn Sie diese Einstellung auf „Aus“ festlegen, werden Add-Ins blockiert, wenn die Einstellung für die Appschutz-Richtlinie auf „Zulassen“ festgelegt ist.",
+ "discoverFeedTitle": "Ermittlungsfeed",
+ "discoverFeedTooltip": "Im Ermittlungsfeed werden die Office-Dateien angezeigt, auf die am häufigsten zugegriffen wurde. Standardmäßig ist dieser Feed aktiviert, wenn Delve für den Benutzer aktiviert ist. Wurde die App nicht konfiguriert, lautet die Standard-App-Einstellung „Ein“.",
+ "enableSMIMETitle": "S/MIME aktivieren",
+ "enableSMIMETooltip": "Hiermit geben Sie an, ob S/MIME-Steuerelemente beim Verfassen einer E-Mail aktiviert werden.",
+ "encryptAllEmails": "Alle E-Mails verschlüsseln",
+ "encryptAllEmailsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung „Alle E-Mails verschlüsseln“ ändern darf.",
+ "encryptAllEmailsTooltip": "Geben Sie an, ob alle E-Mails verschlüsselt werden müssen oder nicht. Bei der Verschlüsselung werden Daten mithilfe eines Verschlüsselungsverfahrens konvertiert, sodass sie nur vom vorgesehenen Empfänger gelesen werden können.",
+ "ldapUrl": "LDAP-URL",
+ "ldapUrlTooltip": "Dies ist der LDAP-Hostname, über den Clients die öffentlichen Verschlüsselungsschlüssel für E-Mail-Empfänger abrufen können. E-Mails werden verschlüsselt, wenn ein Schlüssel verfügbar ist. Unterstützte Formate: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf.",
+ "nativeCalendarSyncMAMOnlyTitle": "Kalendersynchronisierung zulassen",
+ "nativeCalendarSyncMAMOnlyTooltip": "Standardmäßig erlaubt eine App-Schutzrichtlinie eine Kalendersynchronisierung mit der nativen Kalenderanwendung, kann aber verwendet werden, um die Verfügbarkeit der Kalendersynchronisierung zu blockieren. Diese Einstellung funktioniert unabhängig von der Einstellung der App-Schutzrichtlinie. So können Organisationen festlegen, ob die Kalendersynchronisierung für das Geschäfts-, Schul- oder Unikonto verfügbar ist.",
+ "nativeCalendarSyncTitle": "Kalender synchronisieren",
+ "nativeCalendarSyncTooltip": "Standardmäßig ermöglicht eine Appschutz-Richtlinie die Kalendersynchronisierung mit der nativen Kalender-App. Sie kann jedoch verwendet werden, um die Verfügbarkeit der Kalendersynchronisierung mit der Einstellung „Per Richtlinie verwaltete App-Daten mit nativen Apps synchronisieren“ zu blockieren. Wenn Sie diese Einstellung auf „Aus“ festlegen, wird die Kalendersynchronisierung blockiert, wenn die Einstellung für die Appschutz-Richtlinie auf „Zulassen“ festgelegt ist.",
+ "playMyEmailsTitle": "Meine E-Mails wiedergeben",
+ "playMyEmailsTooltip": "Das Feature „Meine E-Mails wiedergeben“ ist in der App standardmäßig nicht aktiviert, wird aber berechtigten Benutzern über ein Banner im Posteingang angepriesen. Wenn diese Option deaktiviert ist, werden berechtigte Benutzer in der App nicht auf dieses Feature aufmerksam gemacht. Benutzer können „Meine E-Mails wiedergeben“ auch dann manuell über die App aktivieren, wenn dieses Feature deaktiviert ist. Bei der Einstellung „Nicht konfiguriert“ ist die App-Einstellung standardmäßig aktiviert, und berechtigte Benutzer werden auf das Feature aufmerksam gemacht.",
+ "signAllEmails": "Alle E-Mails signieren",
+ "signAllEmailsAllowUserChangeTooltip": "Geben Sie an, ob der Benutzer die Einstellung „Alle E-Mails signieren“ ändern darf.",
+ "signAllEmailsTooltip": "Geben Sie an, ob alle E-Mail-Nachrichten signiert werden müssen. Eine digitale Signatur belegt die Echtheit der E-Mail-Adresse und stellt sicher, dass der Inhalt während der Übertragung nicht verändert wird.",
+ "syncAddressTitle": "Adresse",
+ "syncAddressTooltip": "Dieser Wert gibt an, ob die Adresse des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncBirthdayTitle": "Geburtstag",
+ "syncBirthdayTooltip": "Dieser Wert gibt an, ob der Geburtstag des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncCompanyTitle": "Firma",
+ "syncCompanyTooltip": "Dieser Wert gibt an, ob der Unternehmensname des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncDepartmentTitle": "Abteilung",
+ "syncDepartmentTooltip": "Dieser Wert gibt an, ob die Abteilung des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncEmailAddressTitle": "E-Mail-Adresse",
+ "syncEmailAddressTooltip": "Dieser Wert gibt an, ob die E-Mail-Adresse des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncInstantMessagingAddressTitle": "Chatadresse",
+ "syncInstantMessagingAddressTooltip": "Dieser Wert gibt an, ob die Chatadresse des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncJobTitleTitle": "Position",
+ "syncJobTitleTooltip": "Dieser Wert gibt an, ob die Position des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncNicknameTitle": "Kurzname",
+ "syncNicknameTooltip": "Dieser Wert gibt an, ob der Spitzname des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncNotesTitle": "Notes",
+ "syncNotesTooltip": "Dieser Wert gibt an, ob die Notizen des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncPhoneHomeFaxNumberTitle": "Private Faxnummer",
+ "syncPhoneHomeFaxNumberTooltip": "Dieser Wert gibt an, ob die private Faxnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncPhoneHomeNumberTitle": "Private Telefonnummer",
+ "syncPhoneHomeNumberTooltip": "Dieser Wert gibt an, ob die private Telefonnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncPhoneMobileNumberTitle": "Mobiltelefonnummer",
+ "syncPhoneMobileNumberTooltip": "Dieser Wert gibt an, ob die Mobiltelefonnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncPhoneOtherNumberTitle": "Andere Telefonnummer",
+ "syncPhoneOtherNumberTooltip": "Dieser Wert gibt an, ob die andere Telefonnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncPhonePagerNumberTitle": "Pagertelefonnummer",
+ "syncPhonePagerNumberTooltip": "Dieser Wert gibt an, ob die Pagertelefonnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncPhoneWorkFaxNumberTitle": "Geschäftliche Faxnummer",
+ "syncPhoneWorkFaxNumberTooltip": "Dieser Wert gibt an, ob die geschäftliche Faxnummer des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncPhoneWorkNumberTitle": "Geschäftliche Telefonnummer",
+ "syncPhoneWorkNumberTooltip": "Dieser Wert gibt an, ob die geschäftliche Telefonnummer mit nativen Kontakten synchronisiert werden soll.",
+ "syncPrefixTitle": "Namenspräfix",
+ "syncPrefixTooltip": "Dieser Wert gibt an, ob die Anrede des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "syncSuffixTitle": "Namenssuffix",
+ "syncSuffixTooltip": "Dieser Wert gibt an, ob das Namenssuffix des Kontakts mit nativen Kontakten synchronisiert werden soll.",
+ "textPredictionsTitle": "Textvorhersagen",
+ "textPredictionsTooltip": "Während Sie Nachrichten verfassen, kann Outlook Wörter und Ausdrücke vorschlagen. Wischen Sie, um einen von Outlook angebotenen Vorschlag zu akzeptieren. Wenn diese Einstellung auf „Nicht konfiguriert“ festgelegt ist, wird die standardmäßige App-Einstellung auf EIN festgelegt.",
+ "themesEnabledTitle": "Designs aktiviert",
+ "themesEnabledTooltip": "Geben Sie an, ob der Benutzer ein benutzerdefiniertes visuelles Design verwenden darf."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Mit dieser Einstellung bleiben Sie darüber informiert, welche Benutzer Apps installieren, die nicht für die Verwendung in Ihrem Unternehmen genehmigt sind. Wählen Sie die Art der Liste für eingeschränkte Apps aus:
\r\n Verbotene Apps: Eine Liste der Apps, bei denen Sie informiert werden möchten, wenn Benutzer sie installieren. \r\n Genehmigte Apps: Eine Liste der Apps, die zur Verwendung in Ihrem Unternehmen genehmigt sind. Wenn Benutzer eine App installieren, die nicht in dieser Liste aufgeführt ist, werden Sie informiert. \r\n ",
+ "androidZebraMxZebraMx": "Hiermit werden Zebra-Geräte durch das Hochladen eines MX-Profils im XML-Format konfiguriert.",
+ "iosDeviceFeaturesAirprint": "Mit diesen Einstellungen konfigurieren Sie iOS-Geräte für das automatische Herstellen einer Verbindung mit AirPrint-kompatiblen Druckern in Ihrem Netzwerk. Sie benötigen die IP-Adresse und den Ressourcenpfad Ihrer Drucker.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Konfigurieren Sie eine App-Erweiterung, die einmaliges Anmelden (Single Sign-On, SSO) für Geräte mit iOS 13.0 oder höher aktiviert.",
+ "iosDeviceFeaturesHomeScreenLayout": "Konfigurieren Sie das Layout für den Dock- und den Startbildschirm auf iOS-Geräten. Für bestimmte Geräte gelten möglicherweise Limits für die Anzahl von Elementen, die angezeigt werden können.",
+ "iosDeviceFeaturesIOSWallpaper": "Hiermit wird ein Bild zur Anzeige auf dem Startbildschirm und/oder dem Sperrbildschirm von iOS-Geräten angegeben.\r\n Um unterschiedliche Bilder für Start- und Sperrbildschirm zu verwenden, erstellen Sie ein Profil mit dem Bild für den Sperrbildschirm und ein Profil mit dem Bild für den Startbildschirm.\r\n Weisen Sie Ihren Benutzern anschließend beide Profile zu.\r\n \r\n
\r\n
Max. Dateigröße: 750 KB
\r\n
Dateityp: PNG, JPG oder JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Geben Sie Benachrichtigungseinstellungen für Apps an. Unterstützt iOS 9.3 und höher.",
+ "iosDeviceFeaturesSharedDevice": "Hiermit wird optionaler Text zur Anzeige auf dem Sperrbildschirm angegeben. Diese Funktion wird unter iOS 9.3 und höher unterstützt. Weitere Informationen",
+ "iosGeneralApplicationRestrictions": "Mit dieser Einstellung bleiben Sie darüber informiert, welche Benutzer Apps installieren, die nicht für die Verwendung in Ihrem Unternehmen genehmigt sind. Wählen Sie die Art der Liste für eingeschränkte Apps aus:
\r\n Verbotene Apps: Eine Liste der Apps, bei denen Sie informiert werden möchten, wenn Benutzer sie installieren. \r\n Genehmigte Apps: Eine Liste der Apps, die zur Verwendung in Ihrem Unternehmen genehmigt sind. Wenn Benutzer eine App installieren, die nicht in dieser Liste aufgeführt ist, werden Sie informiert. \r\n ",
+ "iosGeneralApplicationVisibility": "Verwenden Sie die Liste \"Apps anzeigen\" um festzulegen, welche iOS-Apps der Benutzer anzeigen oder starten kann. Verwenden Sie die Liste \"Ausgeblendete Apps\", um festzulegen, welche iOS-Apps der Benutzer nicht anzeigen oder starten kann.",
+ "iosGeneralAutonomousSingleAppMode": "Apps, die Sie dieser Liste hinzufügen und einem Gerät zuweisen, können das Gerät so sperren, dass nur diese App nach ihrem Start ausgeführt werden kann, oder sie können das Gerät während der Ausführung einer bestimmten Aktion sperren (beispielsweise bei einer Prüfung). Sobald die Aktion abgeschlossen ist oder Sie die Einschränkung entfernen, kehrt das Gerät zu seinem Normalzustand zurück.",
+ "iosGeneralKiosk": "Der Kioskmodus sperrt verschiedene Einstellungen in einem Gerät oder gibt eine einzige App an, die auf einem Gerät ausgeführt werden kann. Dies kann in Umgebungen wie beispielsweise einem Ladengeschäft hilfreich sein, in dem auf einem Gerät nur eine einzige Demo-App ausgeführt werden soll.",
+ "macDeviceFeaturesAirprint": "Verwenden Sie diese Einstellungen, um macOS-Geräte für die automatische Verbindungsherstellung mit AirPrint-kompatiblen Druckern im Netzwerk zu konfigurieren. Sie benötigen die IP-Adresse und den Ressourcenpfad Ihrer Drucker.",
+ "macDeviceFeaturesAssociatedDomains": "Konfigurieren Sie zugeordnete Domänen, um Daten und Anmeldeinformationen zwischen den Apps und Websites Ihrer Organisation freizugeben. Dieses Profil kann auf Geräte mit macOS 10.15 oder höher angewendet werden.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Konfigurieren Sie eine App-Erweiterung, die einmaliges Anmelden (Single Sign-On, SSO) für Geräte mit macOS 10.15 oder höher aktiviert.",
+ "macDeviceFeaturesLoginItems": "Wählen Sie aus, welche Apps, Dateien und Ordner geöffnet werden sollen, wenn sich Benutzer bei ihren Geräten anmelden. Wenn Sie nicht möchten, dass Benutzer das Verhalten der Apps beim Öffnen ändern, können Sie die App aus der Benutzerkonfiguration ausblenden.",
+ "macDeviceFeaturesLoginWindow": "Hiermit konfigurieren Sie die Darstellung des macOS-Anmeldebildschirms und die Funktionen, die den Benutzern vor und nach der Anmeldung zur Verfügung stehen.",
+ "macExtensionsKernelExtensions": "Verwenden Sie diese Einstellungen zum Konfigurieren der Kernelerweiterungsrichtlinie auf macOS-Geräten unter 10.13.2 oder höher.",
+ "macGeneralDomains": "Vom Benutzer gesendete oder empfangene E-Mails, die nicht den hier angegebenen Domänen entsprechen, werden als nicht vertrauenswürdig markiert.",
+ "windows10EndpointProtectionApplicationGuard": "Bei der Verwendung von Microsoft Edge schützt Microsoft Defender Application Guard Ihre Umgebung vor Websites, die von Ihrer Organisation nicht als vertrauenswürdig definiert wurden. Wenn Benutzer Websites besuchen, die nicht in Ihrer isolierten Netzwerkgrenze aufgeführt sind, werden die Websites in einer virtuellen Browsersitzung in Hyper-V geöffnet. Vertrauenswürdige Sites werden durch eine Netzwerkgrenze definiert, die in der Gerätekonfiguration konfiguriert werden kann. Beachten Sie, dass dieses Feature nur für Geräte mit 64-Bit-Windows 10 oder höher verfügbar ist.",
+ "windows10EndpointProtectionCredentialGuard": "Durch das Aktivieren von Credential Guard werden folgende erforderliche Einstellungen aktiviert:\r\n \r\n
\r\n
Virtualisierungsbasierte Sicherheit aktivieren: Aktiviert die virtualisierungsbasierte Sicherheit (VBS) beim nächsten Neustart. Die virtualisierungsbasierte Sicherheit verwendet Windows Hypervisor, um Unterstützung für Sicherheitsdienste bereitzustellen.
\r\n \r\n
Sicherer Start mit direktem Speicherzugriff: Aktiviert VBS mit sicherem Start und direktem Speicherzugriff (DMA).
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Wählen Sie zusätzliche Apps, die durch die Microsoft Defender-Anwendungssteuerung entweder überwacht werden müssen oder als vertrauenswürdig eingestuft und ausgeführt werden können. Windows-Komponenten und alle Apps aus dem Windows Store werden automatisch als zur Ausführung vertrauenswürdig eingestuft.
\r\n Anwendungen werden nicht blockiert, wenn sie im Modus \"Nur überwachen\" ausgeführt werden. Im Modus \"Nur überwachen\" werden alle Ereignisse in lokalen Clientprotokollen erfasst.\r\n ",
+ "windows10GeneralPrivacyPerApp": "Fügen Sie Apps hinzu, die ein anderes Datenschutzverhalten aufweisen sollen als das von Ihnen unter \"Standarddatenschutz\" definierte.",
+ "windows10NetworkBoundaryNetworkBoundary": "Die Netzwerkgrenze ist die Liste der Unternehmensressourcen, z. B. eine in der Cloud gehostete Domäne und IP-Adressbereiche für Computer, die sich im Unternehmensnetzwerk befinden. Definieren Sie Netzwerkgrenzen, um Richtlinien zum Schutz von Daten anzuwenden, die an diesen Standorten vorliegen.",
+ "windowsHealthMonitoring": "Hiermit wird die Richtlinie für die Windows-Integritätsüberwachung konfiguriert.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone kann Benutzer daran hindern, die in der Liste unzulässiger Apps enthaltenen Apps bzw. Apps, die nicht in der Liste genehmigter Apps aufgeführt sind, zu installieren oder zu starten. Alle verwalteten Apps müssen der Liste genehmigter Apps hinzugefügt werden."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Nur ausgewählte blockierende Apps in der Technikerphase als fehlerhaft kennzeichnen",
+ "apps": "Apps",
+ "appsListName": "Anwendungsliste",
+ "blockingApps": "Blockierende Apps",
+ "managedApps": "Verwaltete Apps",
+ "noApps": "Keine Anwendungen",
+ "noAppsError": "Fehler beim Abrufen von Anwendungen.",
+ "selectApps": "Apps auswählen",
+ "selectedAppsCount": "{0} Apps ausgewählt (max. 100)",
+ "useSelectedAppsAll": "Alle",
+ "useSelectedAppsSelected": "Ausgewählt",
+ "useSelectedAppsToggleLabel": "Geräteverwendung blockieren, bis erforderliche Apps installiert wurden (sofern dem Benutzer/Gerät zugewiesen)"
+ },
+ "Header": {
+ "application": "Anwendung",
+ "publisher": "Herausgeber",
+ "version": "Version"
+ },
+ "SearchBox": {
+ "ariaLabel": "Apps suchen",
+ "placeHolder": "Nach Name oder Herausgeber suchen"
+ },
+ "allowToUseToggle": "Benutzern bei Installationsfehlern Geräteverwendung erlauben",
+ "blockToggle": "Geräteverwendung blockieren, bis alle Apps und Profile installiert sind",
+ "blockToolTip": "Wenn Sie dieser Liste zum Beispiel Microsoft Word hinzufügen, können Zielbenutzer und -geräte die Registrierungsstatusseite nicht mehr verlassen, bis Word erfolgreich installiert wurde.",
+ "collectLogToggle": "Protokollsammlung und Diagnoseseite für Endbenutzer aktivieren",
+ "create": "Profil erstellen",
+ "customMessageTextBox": "Fehlermeldung",
+ "customMessageToggle": "Bei einem Zeitlimit oder Fehler benutzerdefinierte Meldung anzeigen",
+ "enableForAutopilotOnlyToggle": "Seite nur für Geräte anzeigen, die über die Willkommensseite bereitgestellt wurden",
+ "installQualityUpdatesToggle": "Installieren von Windows-Qualitätsupdates (kann das Gerät neu starten) (Vorschau)",
+ "progressToggle": "Konfigurationsfortschritt für Apps und Profile anzeigen",
+ "resetToggle": "Benutzern bei Installationsfehlern das Zurücksetzen des Geräts erlauben",
+ "timeout": "Fehler anzeigen, wenn die Installation länger als die angegebene Anzahl von Minuten dauert"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Eigenschaft",
+ "rule": "Regel",
+ "ruleDetails": "Regeldetails",
+ "value": "Wert"
+ },
+ "assignIf": "Profil in folgenden Fällen zuweisen",
+ "deleteWarning": "Hierdurch wird die ausgewählte Anwendbarkeitsregel gelöscht.",
+ "dontAssignIf": "Profil in folgenden Fällen nicht zuweisen",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "und {0} weitere",
+ "instructions": "Geben Sie an, wie dieses Profil innerhalb einer zugewiesenen Gruppe angewendet werden soll. Intune wendet das Profil nur auf Geräte an, die die kombinierten Kriterien dieser Regeln erfüllen.",
+ "maxText": "Max.",
+ "minText": "Min.",
+ "noActionRow": "Keine Anwendbarkeitsregeln angegeben.",
+ "oSVersion": "Beispiel: 1.2.3.4",
+ "toText": "bis",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home (China)",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home (Einzelsprache)",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "Betriebssystemedition",
+ "windows10OsVersion": "Betriebssystemversion",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Benutzer das Ändern der Einstellung erlauben",
+ "tooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf."
+ },
+ "AllowWorkAccounts": {
+ "title": "Nur Geschäfts-, Schul- oder Unikonten zulassen",
+ "tooltip": " Wenn diese Einstellung aktiviert ist, können Benutzer keine persönlichen E-Mail- und Speicherkonten in Outlook hinzufügen. Wenn der Benutzer ein persönliches Konto zu Outlook hinzugefügt hat, wird er aufgefordert, das persönliche Konto zu entfernen. Wird das persönliche Konto nicht entfernt, kann das Geschäfts, Schul- oder Unikonto nicht hinzugefügt werden."
+ },
+ "BlockExternalImages": {
+ "title": "Externe Bilder blockieren",
+ "tooltip": "Wenn die Option \"Externe Bilder blockieren\" aktiviert ist, verhindert die App das Herunterladen von im Internet gehosteten Bildern, die in den Nachrichtentext eingebettet sind. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App \"Aus\"."
+ },
+ "ConfigureEmail": {
+ "title": "E-Mail-Kontoeinstellungen konfigurieren"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Die Standard-App-Signatur gibt an, ob die App \"Outlook für Android herunterladen\" als standardmäßige Signatur beim Verfassen von Nachrichten verwendet wird. Wenn die Einstellung als deaktiviert konfiguriert ist, wird die standardmäßige Signatur nicht verwendet. Benutzer können jedoch ihre eigene Signatur hinzufügen.\r\n\r\nWenn sie als nicht konfiguriert festgelegt wird, ist die Standard-App-Einstellung aktiviert.",
+ "iOS": "Die Standard-App-Signatur gibt an, ob die App \"Outlook für iOS herunterladen\" als standardmäßige Signatur beim Verfassen von Nachrichten verwendet wird. Wenn die Einstellung als deaktiviert konfiguriert ist, wird die standardmäßige Signatur nicht verwendet. Benutzer können jedoch ihre eigene Signatur hinzufügen.\r\n\r\nWenn sie als nicht konfiguriert festgelegt wird, ist die Standard-App-Einstellung aktiviert."
+ },
+ "title": "Standard-App-Signatur"
+ },
+ "OfficeFeedReplies": {
+ "title": "Ermittlungsfeed",
+ "tooltip": "Im Ermittlungsfeed werden die Office-Dateien angezeigt, auf die am häufigsten zugegriffen wurde. Standardmäßig ist dieser Feed aktiviert, wenn Delve für den Benutzer aktiviert ist. Wurde die App nicht konfiguriert, lautet die Standard-App-Einstellung \"Ein\"."
+ },
+ "OrganizeMailByThread": {
+ "title": "E-Mails nach Thread organisieren",
+ "tooltip": "Das Standardverhalten in Outlook besteht darin, E-Mail-Nachrichten zu bündeln und als Unterhaltungsthread anzuzeigen. Wenn diese Einstellung deaktiviert ist, gruppiert Outlook die E-Mails nicht, sondern zeigt jede E-Mail einzeln an."
+ },
+ "PlayMyEmails": {
+ "title": "Meine E-Mails wiedergeben",
+ "tooltip": "Das Feature \"Meine E-Mails wiedergeben\" ist in der App standardmäßig nicht aktiviert, wird aber berechtigten Benutzern über ein Banner im Posteingang angepriesen. Wenn diese Option deaktiviert ist, werden berechtigte Benutzer in der App nicht auf dieses Feature aufmerksam gemacht. Benutzer können \"Meine E-Mails wiedergeben\" auch dann manuell über die App aktivieren, wenn dieses Feature deaktiviert ist. Bei der Einstellung \"Nicht konfiguriert\" ist die App-Einstellung standardmäßig aktiviert, und berechtigte Benutzer werden auf das Feature aufmerksam gemacht."
+ },
+ "SuggestedReplies": {
+ "title": "Vorgeschlagene Antworten",
+ "tooltip": "Wenn Sie eine Nachricht öffnen, schlägt Outlook unterhalb der Nachricht möglicherweise Antworten vor. Wenn Sie eine vorgeschlagene Antwort auswählen, können Sie diese vor dem Senden bearbeiten."
+ },
+ "SyncCalendars": {
+ "title": "Kalender synchronisieren",
+ "tooltip": "Hiermit wird konfiguriert, ob Benutzer ihren Outlook-Kalender mit der nativen Kalender-App und -datenbank synchronisieren können."
+ },
+ "TextPredictions": {
+ "title": "Textvorhersagen",
+ "tooltip": "Während Sie Nachrichten verfassen, kann Outlook Wörter und Ausdrücke vorschlagen. Wischen Sie, um einen von Outlook angebotenen Vorschlag zu akzeptieren. Wenn diese Einstellung auf \"Nicht konfiguriert\" festgelegt ist, wird die standardmäßige App-Einstellung auf EIN festgelegt."
+ },
+ "ThemesEnabled": {
+ "title": "Designs aktiviert",
+ "tooltip": "Geben Sie an, ob der Benutzer ein benutzerdefiniertes visuelles Design verwenden darf."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS-Geräte"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Administratorkontakte",
+ "appPackaging": "App-Paketierung",
+ "autopatchGroups": "Autopatch-Gruppen",
+ "devices": "Geräte",
+ "featureEnablement": "Feature aktivieren",
+ "feedback": "Feedback",
+ "gettingStarted": "Erste Schritte",
+ "messages": "Meldungen",
+ "onlineResources": "Onlineressourcen",
+ "policyHealth": "Richtlinienintegrität",
+ "policyHealthPreview": "Richtlinienintegrität (Vorschau)",
+ "releaseManagement": "Release Management",
+ "serviceRequests": "Service Requests",
+ "settings": "Einstellungen",
+ "supportRequests": "Supportanfragen",
+ "tenantEnrollment": "Mandantenregistrierung",
+ "tenantManagement": "Mieterverwaltung"
+ },
+ "actions": "Aktionen bei Inkompatibilität",
+ "advancedExchangeSettings": "Exchange Online-Einstellungen",
+ "advancedThreatProtection": "Microsoft Defender für Endpunkt",
+ "allApps": "Alle Apps",
+ "allDevices": "Alle Geräte",
+ "androidFotaDeployments": "Android FOTA-Bereitstellungen",
+ "appBundles": "App-Bundles",
+ "appCategories": "App-Kategorien",
+ "appConfigPolicies": "App-Konfigurationsrichtlinien",
+ "appConfigurationStatus": "App-Konfigurationsstatus",
+ "appInstallStatus": "App-Installationsstatus",
+ "appLicences": "App-Lizenzen",
+ "appProtectionPolicies": "App-Schutzrichtlinien",
+ "appProtectionStatus": "App-Schutzstatus",
+ "appSelectiveWipe": "Selektive App-Zurücksetzung",
+ "appleVppTokens": "Apple-VPP-Token",
+ "apps": "Apps",
+ "assign": "Zuweisungen",
+ "assignedPermissions": "Zugewiesene Berechtigungen",
+ "assignedRoles": "Zugewiesene Rollen",
+ "autopilotDeploymentReport": "Autopilot-Bereitstellungen (Vorschau)",
+ "autopilotDeploymentReportV2": "Autopilot-Bereitstellungen 2.0 (Vorschau)",
+ "brandingAndCustomization": "Anpassung",
+ "cartProfiles": "Warenkorbprofile",
+ "certificateConnectors": "Zertifikatconnectors",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Geräte mit Cloudanbindung (Vorschau)",
+ "cloudPcActions": "Cloud-PC-Aktionen (Vorschau)",
+ "cloudPcMaintenanceWindows": "Wartungsfenster für Cloud-PCs (Vorschau)",
+ "compliancePolicies": "Konformitätsrichtlinien",
+ "complianceScriptManagement": "Skripts",
+ "complianceScriptManagementPreview": "Skripts (Vorschau)",
+ "complianceSettings": "Einstellungen für Kompatibilitätsrichtlinie",
+ "conditionStatements": "Bedingungsaussagen",
+ "conditions": "Speicherorte",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Konfigurationsprofile",
+ "configurationScripts": "Konfigurationsskripts",
+ "connectorsAndTokens": "Connectors und Token",
+ "corporateDeviceIdentifiers": "Bezeichner von Unternehmensgeräten",
+ "customAttributes": "Benutzerdefinierte Attribute",
+ "customAttributesMacOS": "Benutzerdefinierte Attribute für macOS",
+ "customNotifications": "Benutzerdefinierte Benachrichtigungen",
+ "deploymentSettings": "Bereitstellungseinstellungen",
+ "derivedCredentials": "Abgeleitete Anmeldeinformationen",
+ "deviceActions": "Geräteaktionen",
+ "deviceCategories": "Gerätekategorien",
+ "deviceCleanUp": "Regeln für die Gerätebereinigung",
+ "deviceEnrollmentManagers": "Geräteregistrierungs-Manager",
+ "deviceExecutionStatus": "Gerätestatus",
+ "deviceLimitEnrollmentRestrictions": "Registrierungseinschränkungen – Gerätelimit",
+ "deviceTypeEnrollmentRestrictions": "Registrierungseinschränkungen – Geräteplattform",
+ "devices": "Geräte",
+ "discoveredApps": "Ermittelte Apps",
+ "edgePolicies": "Richtlinien für Microsoft Edge",
+ "embeddedSIM": "eSIM-Mobilfunkprofile (Vorschau)",
+ "enrollDevices": "Geräte registrieren",
+ "enrollmentFailures": "Registrierungsfehler",
+ "enrollmentNotifications": "Registrierungsbenachrichtigungen (Vorschau)",
+ "enrollmentRestrictions": "Registrierungsbeschränkungen",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange-Dienstconnectors",
+ "failuresForCumulativeQualityUpdates": "Fehler bei kumulativen Windows-Qualitätsupdates",
+ "failuresForDriverUpdates": "Windows-Treiberupdatefehler",
+ "failuresForFeatureUpdates": "Fehler bei Featureupdate",
+ "failuresForQualityUpdates": "Fehler bei beschleunigten Windows-Updates",
+ "featureFlighting": "Feature-Flighting",
+ "featureUpdateDeployments": "Featureupdates für Windows 10 und höher",
+ "flighting": "Test-Flighting",
+ "fotaUpdate": "Firmware-Over-the-Air-Update",
+ "groupPolicy": "Administrative Vorlagen",
+ "groupPolicyAnalytics": "Analyse von Gruppenrichtlinien",
+ "helpSupport": "Hilfe und Support",
+ "helpSupportReplacement": "Hilfe und Support ({0})",
+ "iOSAppProvisioning": "iOS-App-Bereitstellungsprofile",
+ "incompleteUserEnrollments": "Unvollständige Benutzerregistrierungen",
+ "iosUpdates": "iOS-/iPadOS-Updates",
+ "legacyPcManagement": "Legacy-PC-Verwaltung",
+ "macOSSoftwareUpdate": "macOS-Updates",
+ "macOSSoftwareUpdateAccountSummaries": "Installationsstatus für macOS-Geräte",
+ "macOSSoftwareUpdateCategorySummaries": "Zusammenfassung der Softwareupdates",
+ "macOSSoftwareUpdateStateSummaries": "Updates",
+ "managedGooglePlay": "Verwaltetes Google Play",
+ "msfb": "Microsoft Store für Unternehmen",
+ "myPermissions": "Meine Berechtigungen",
+ "notifications": "Benachrichtigungen",
+ "officeApps": "Office-Apps",
+ "officeProPlusPolicies": "Richtlinien für Office-Apps",
+ "onPremise": "Lokal",
+ "onPremisesConnector": "Lokaler Connector für Exchange ActiveSync",
+ "onPremisesDeviceAccess": "Exchange ActiveSync-Geräte",
+ "onPremisesManageAccess": "Zugriff auf Exchange lokal",
+ "outOfDateIosDevices": "Installationsfehler für iOS-Geräte",
+ "overview": "Übersicht",
+ "partnerDeviceManagement": "Partnergeräteverwaltung",
+ "perUpdateRingDeploymentState": "Bereitstellungsstatus pro Updatering",
+ "permissions": "Berechtigungen",
+ "platformApps": "{0} Apps",
+ "platformDevices": "{0} Geräte",
+ "platformEnrollment": "{0}-Registrierung",
+ "policies": "Richtlinien",
+ "profiles": "Profile",
+ "properties": "Eigenschaften",
+ "reports": "Berichte",
+ "retireNoncompliantDevices": "Nicht konforme Geräte abkoppeln",
+ "retireNoncompliantDevicesPreview": "Nicht konforme Geräte abkoppeln (Vorschau)",
+ "role": "Rolle",
+ "scriptManagement": "Skripts",
+ "securityBaselines": "Sicherheitsbaselines",
+ "serviceToServiceConnector": "Exchange Online-Connector",
+ "servicenowConnector": "ServiceNow-Connector",
+ "shellScripts": "Shellskripts",
+ "teamViewerConnector": "TeamViewer-Connector",
+ "telecomeExpenseManagement": "Telecom Expense Management",
+ "tenantAdmin": "Mandantenadministrator",
+ "tenantAdministration": "Mandantenverwaltung",
+ "termsAndConditions": "Geschäftsbedingungen",
+ "titles": "Titel",
+ "troubleshoot": "Problembehandlung",
+ "troubleshootSupport": "Problembehandlung + Support",
+ "user": "Benutzer",
+ "userExecutionStatus": "Benutzerstatus",
+ "wdacSupplementalPolicies": "Zusätzliche S Modus-Richtlinien",
+ "win32CatalogUpdateApp": "Updates für Unternehmens-App-Verwaltungs-Apps",
+ "win32CatalogUpdateAppInPreview": "Updates für Windows-Katalog-Apps (Win32) (Vorschau)",
+ "win32CatalogUpdateAppPreviewTitle": "Enterprise App-Katalog-Apps mit Updates (Vorschau)",
+ "win32CatalogUpdateAppTitle": "Enterprise App-Katalog-Apps mit Updates",
+ "windows10DriverUpdate": "Treiberupdates für Windows 10 und höher",
+ "windows10QualityUpdate": "Qualitätsupdates für Windows 10 und höher",
+ "windows10UpdateRings": "Updateringe für Windows 10 und höher",
+ "windows10XPolicyFailures": "Windows 10X-Richtlinienfehler",
+ "windows365PartnerConnector": "Windows 365-Partnerconnectors",
+ "windowsDiagnosticData": "Windows-Daten",
+ "windowsEnterpriseCertificate": "Windows Enterprise-Zertifikat",
+ "windowsManagement": "Skripts",
+ "windowsSideLoadingKeys": "Windows-Schlüssel zum Querladen",
+ "windowsSymantecCertificate": "Windows-DigiCert-Zertifikat",
+ "windowsThreatReport": "Status des Bedrohungs-Agents"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Benutzern das Öffnen von Daten über ausgewählte Dienste erlauben",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Anzahl der beizubehaltenden vorherigen PIN-Werte auswählen"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "Für alle Konformitätsrichtlinien ist eine Blockierungsaktion erforderlich.",
- "graceperiod": "Zeitplan (Tage nach Inkompatibilität)",
- "graceperiodInfo": "Geben Sie die Anzahl von Tagen nach Feststellen der Inkompatibilität an, nach denen diese Aktion für das Gerät des Benutzers ausgelöst werden soll.",
- "subtitle": "Aktionsparameter angeben",
- "title": "Aktionsparameter"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Benutzern als optionales Update zur Verfügung stellen",
+ "optionalValue": "Optional",
+ "required": "Benutzern als erforderliches Update zur Verfügung stellen",
+ "requiredValue": "Erforderlich"
},
- "List": {
- "gracePeriodDay": "{0} Tag nach Inkompatibilität",
- "gracePeriodDays": "{0} Tage nach Inkompatibilität",
- "gracePeriodHour": "{0} Stunde nach Nichtkonformität",
- "gracePeriodHours": "{0} Stunden nach Nichtkonformität",
- "gracePeriodMinute": "{0} Minute nach Nichtkonformität",
- "gracePeriodMinutes": "{0} Minuten nach Nichtkonformität",
- "immediately": "Sofort",
- "schedule": "Zeitplan",
- "scheduleInfoBalloon": "Tage nach Nichtkonformität",
- "subtitle": "Aktionsfolge auf nicht kompatiblen Geräte angeben",
- "title": "Aktionen"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise-System-App",
+ "androidForWorkApp": "Verwaltete Google Play Store-App",
+ "androidLobApp": "Branchenspezifische Android-App",
+ "androidStoreApp": "Android Store-App",
+ "builtInAndroid": "Integrierte Android-App",
+ "builtInApp": "Integrierte App",
+ "builtInIos": "Integrierte iOS-App",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS-Webclip",
+ "iosLobApp": "Branchenspezifische iOS-App",
+ "iosStoreApp": "iOS Store-App",
+ "iosVppApp": "iOS Volume Purchase Program-App",
+ "lineOfBusinessApp": "Branchenspezifische App",
+ "macOSDmgApp": "macOS-App (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Branchenspezifische macOS-App",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365-Apps (macOS)",
+ "macOSPkgApp": "macOS-App (PKG)",
+ "macOSWebClip": "macOS-Webclip",
+ "macOsVppApp": "macOS-Volume Purchase Program-App",
+ "managedAndroidLobApp": "Verwaltete branchenspezifische Android-App",
+ "managedAndroidStoreApp": "Verwaltete Android Store-App",
+ "managedGooglePlayApp": "Verwaltete Google Play Store-App",
+ "managedGooglePlayPrivateApp": "Private verwaltete Google Play-App",
+ "managedGooglePlayWebApp": "Weblink für verwaltetes Google Play",
+ "managedIosLobApp": "Verwaltete branchenspezifische iOS-App",
+ "managedIosStoreApp": "Verwaltete iOS Store-App",
+ "microsoftStoreForBusinessApp": "Microsoft Store für Unternehmen-App",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store für Unternehmen",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 und höher)",
+ "webApp": "Weblink",
+ "windowsAppXLobApp": "Branchenspezifische Windows-APPX-App",
+ "windowsClassicApp": "Windows-App (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 und höher)",
+ "windowsMobileMsiLobApp": "Branchenspezifische Windows MSI-App",
+ "windowsPhone81AppXBundleLobApp": "Branchenspezifische Windows Phone 8.1-APPX-App",
+ "windowsPhone81AppXLobApp": "Branchenspezifische Windows Phone 8.1-APPX-App",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 Store-App",
+ "windowsPhoneXapLobApp": "Branchenspezifische Windows Phone-XAP-App",
+ "windowsStoreApp": "Microsoft Store-App (Legacy)",
+ "windowsUniversalAppXLobApp": "Branchenspezifische Windows Universal-APPX-App",
+ "windowsUniversalLobApp": "Branchenspezifische Windows Universal-App",
+ "windowsWebApp": "Windows-Weblink"
+ },
+ "PolicySet": {
+ "appManagement": "Anwendungsverwaltung",
+ "assignments": "Zuweisungen",
+ "basics": "Grundlagen",
+ "deviceEnrollment": "Geräteregistrierung",
+ "deviceManagement": "Geräteverwaltung",
+ "scopeTags": "Bereichstags",
+ "appConfigurationTitle": "App-Konfigurationsrichtlinien",
+ "appProtectionTitle": "App-Schutzrichtlinien",
+ "appTitle": "Apps",
+ "iOSAppProvisioningTitle": "iOS-App-Bereitstellungsprofile",
+ "deviceLimitRestrictionTitle": "Einschränkungen zum Gerätelimit",
+ "deviceTypeRestrictionTitle": "Einschränkungen zum Gerätetyp",
+ "enrollmentStatusSettingTitle": "Registrierungsstatusseiten",
+ "windowsAutopilotDeploymentProfileTitle": "Windows Autopilot Deployment-Profile",
+ "deviceComplianceTitle": "Richtlinien zur Gerätekonformität",
+ "deviceConfigurationTitle": "Profile für die Gerätekonfiguration",
+ "powershellScriptTitle": "PowerShell-Skripts"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "App-Installation kann einen Geräteneustart erzwingen",
+ "basedOnReturnCode": "Verhalten auf Grundlage von Rückgabecodes bestimmen",
+ "force": "Intune erzwingt einen verbindlichen Geräteneustart",
+ "suppress": "Keine bestimmte Aktion"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Erforderliche Installationszeit (Min.)",
+ "maxRunTimeInMinutesToolTip": "Die Anzahl von Minuten, die das System auf den Abschluss des Installationsprogramms wartet. Der Standardwert ist 60 Minuten."
+ },
+ "RunAsAccountOptions": {
+ "system": "System",
+ "user": "Benutzer"
+ },
+ "availableUninstall": "Verfügbare Deinstallation zulassen",
+ "availableUninstallTooltip": "Wählen Sie \"Ja\" aus, um die Deinstallationsoption für diese App für Benutzer aus dem Unternehmensportal bereitzustellen. Wählen Sie \"Nein\" aus, um zu verhindern, dass Benutzer die App aus dem Unternehmensportal deinstallieren.",
+ "bladeTitle": "Programm",
+ "deviceRestartBehavior": "Verhalten beim Geräteneustart",
+ "deviceRestartBehaviorTooltip": "Wählen Sie das Verhalten des Geräteneustarts aus, nachdem die App erfolgreich installiert wurde. Wählen Sie \"Verhalten auf Grundlage von Rückgabecodes bestimmen\" aus, um das Gerät basierend auf den Rückgabecode-Konfigurationseinstellungen neu zu starten. Wählen Sie \"Keine bestimmte Aktion\" aus, um Geräteneustarts während der App-Installation für MSI-basierte Apps zu unterdrücken. Wählen Sie \"App-Installation kann einen Geräteneustart erzwingen\" aus, damit die App-Installation abgeschlossen werden kann, ohne dass Neustarts unterdrückt werden. Wählen Sie \"Intune erzwingt einen verbindlichen Geräteneustart\", um das Gerät nach erfolgreicher App-Installation grundsätzlich neu zu starten.",
+ "header": "Geben Sie die Befehle zum Installieren und Deinstallieren dieser App an:",
+ "installCommand": "Installationsbefehl",
+ "installCommandMaxLengthErrorMessage": "Der Installationsbefehl darf die maximal zulässige Länge von 1024 Zeichen nicht überschreiten.",
+ "installCommandTooltip": "Die Befehlszeile zur vollständigen Installation dieser App.",
+ "runAs32Bit": "Befehle zur Installation und Deinstallation auf 64-Bit-Clients in einem 32-Bit-Prozess ausführen",
+ "runAs32BitTooltip": "Wählen Sie \"Ja\", um die App auf 64-Bit-Clients in einem 32-Bit-Prozess zu installieren und zu deinstallieren. Wählen Sie \"Nein\" (Standardeinstellung) aus, um die App auf 64-Bit-Clients in einem 64-Bit-Prozess zu installieren. 32-Bit-Clients verwenden immer einen 32-Bit-Prozess.",
+ "runAsAccount": "Installationsverhalten",
+ "runAsAccountTooltip": "Wählen Sie \"System\" aus, um diese App für alle Benutzer zu installieren, sofern dies unterstützt wird. Wählen Sie \"Benutzer\" aus, um diese App für den auf dem Gerät angemeldeten Benutzer zu installieren. Bei MSI-Apps im dualen Modus verhindern Änderungen, dass Updates und Deinstallationen erfolgreich abgeschlossen werden, bis der Wert, der zum Zeitpunkt der ursprünglichen Installation für das Gerät galt, wiederhergestellt wird.",
+ "selectorLabel": "Programm",
+ "uninstallCommand": "Deinstallationsbefehl",
+ "uninstallCommandTooltip": "Die Befehlszeile zur vollständigen Deinstallation dieser App."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Andere",
- "additionalRecipients": "Zusätzliche Empfänger (per E-Mail)",
- "additionalRecipientsBladeTitle": "Zusätzliche Empfänger auswählen",
- "emailAddressPrompt": "E-Mail-Adressen eingeben (durch Kommas getrennt)",
- "invalidEmail": "Ungültige E-Mail-Adresse",
- "messageTemplate": "Nachrichtenvorlage",
- "noneSelected": "Nichts ausgewählt",
- "notSelected": "Nicht ausgewählt",
- "numSelected": "{0} ausgewählt",
- "selected": "Ausgewählt"
- },
- "block": "Gerät als nicht konform markieren",
- "lockDevice": "Gerät sperren (lokale Aktion)",
- "lockDeviceWithPasscode": "Gerät sperren (lokale Aktion)",
- "noAction": "Keine Aktion",
- "noActionRow": "Keine Aktionen. Wählen Sie \"Hinzufügen\", um eine Aktion hinzuzufügen.",
- "pushNotification": "Pushbenachrichtigung an Endbenutzer senden",
- "remoteLock": "Nicht konformes Gerät remote sperren",
- "removeSourceAccessProfile": "Quellzugriffsprofil entfernen",
- "retire": "Gerät zur Abkoppelungsliste hinzufügen",
- "wipe": "Zurücksetzen",
- "emailNotification": "E-Mail an Endbenutzer senden"
- },
- "InstallIntent": {
- "available": "Für registrierte Geräte verfügbar",
- "availableWithoutEnrollment": "Verfügbar mit oder ohne Registrierung",
- "required": "Erforderlich",
- "uninstall": "Deinstallieren"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Benutzerdefiniertes Skript erstellen",
- "edit": "Benutzerdefiniertes Skript bearbeiten"
- },
- "basicInfo": "Erstellen Sie ein neues benutzerdefiniertes Skriptpaket aus von Ihnen geschriebenen Skripts für Erkennung und Wartung.",
- "customScriptCapitalized": "Benutzerdefiniertes Skript",
- "customScriptLowercase": "benutzerdefiniertes Skript",
- "detectionScript": "Erkennungsskript"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Verwendung von Kleinbuchstaben in der PIN zulassen",
+ "notAllow": "Verwendung von Kleinbuchstaben in der PIN nicht zulassen",
+ "requireAtLeastOne": "Verwendung mindestens eines Kleinbuchstabens in der PIN erforderlich"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Verwendung von Sonderzeichen in der PIN zulassen",
+ "notAllow": "Verwendung von Sonderzeichen in der PIN nicht zulassen",
+ "requireAtLeastOne": "Verwendung mindestens eines Sonderzeichens in der PIN erforderlich"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Verwendung von Großbuchstaben in der PIN zulassen",
+ "notAllow": "Verwendung von Großbuchstaben in der PIN nicht zulassen",
+ "requireAtLeastOne": "Verwendung mindestens eines Großbuchstabens in der PIN erforderlich"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Neu erstellen",
+ "createNewResourceAccountInfo": "
\r\nErstellen Sie während der Registrierung ein neues Ressourcenkonto. Das Ressourcenkonto wird sofort der Ressourcenkontotabelle hinzugefügt, aber erst aktiviert, wenn das Gerät registriert und das Surface Hub-Abonnement überprüft wurde. Weitere Informationen zu Ressourcenkonten
\r\n ",
+ "createNewResourceTitle": "Neues Ressourcenkonto erstellen",
+ "deviceNameInvalid": "Der Gerätename weist ein ungültiges Format auf.",
+ "deviceNameRequired": "Der Gerätename ist erforderlich.",
+ "editResourceAccountLabel": "Bearbeiten",
+ "selectExistingCommandMenu": "Vorhandenes Element auswählen"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "Namen dürfen höchstens 15 Zeichen umfassen und nur Buchstaben (a–Z, A–Z), Ziffern (0–9) und Bindestriche enthalten. Namen dürfen nicht ausschließlich aus Ziffern bestehen und keine Leerzeichen enthalten."
+ },
+ "Header": {
+ "addressableUserName": "Benutzeranzeigename",
+ "azureADDevice": "Zugeordnetes Microsoft Entra-Gerät",
+ "batch": "Gruppentag",
+ "dateAssigned": "Zuweisungsdatum",
+ "deviceAccountPwd": "Gerätekontokennwort",
+ "deviceAccountUpn": "Gerätekonto",
+ "deviceDisplayName": "Gerätename",
+ "deviceFriendlyName": "Anzeigename des Geräts",
+ "deviceName": "Gerätename",
+ "deviceUseType": "Art der Gerätenutzung",
+ "enrollmentState": "Registrierungsstatus",
+ "intuneDevice": "Zugeordnetes Intune-Gerät",
+ "lastContacted": "Zuletzt kontaktiert",
+ "make": "Hersteller",
+ "model": "Modell",
+ "profile": "Zugewiesenes Profil",
+ "profileStatus": "Profilstatus",
+ "purchaseOrderId": "Bestellung",
+ "resourceAccount": "Ressourcenkonto",
+ "serialNumber": "Seriennummer",
+ "userPrincipalName": "Benutzer"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Ein Anzeigename ist erforderlich.",
+ "pwdRequired": "Es ist ein Kennwort erforderlich.",
+ "pwdValidFormat": "Das Kennwort kann nicht aktualisiert werden. Der für das neue Kennwort angegebene Wert erfüllt nicht die Anforderungen der Domäne hinsichtlich Länge oder Komplexität.",
+ "upnRequired": "Ein Gerätekonto ist erforderlich.",
+ "upnValidFormat": "Werte können Buchstaben (a–z, A–Z), Zahlen (0–9) und Bindestriche enthalten. Werte dürfen kein Leerzeichen enthalten."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Besprechungen und Präsentationen",
+ "teamCollaboration": "Teamzusammenarbeit"
+ },
+ "Devices": {
+ "featureDescription": "Mit Windows AutoPilot können Sie die Willkommensseite für Ihre Benutzer anpassen.",
+ "importErrorStatus": "Einige Geräte wurden nicht importiert. Klicken Sie hier, um weitere Informationen zu erhalten.",
+ "importPendingStatus": "Der Import wird ausgeführt. Verstrichene Zeit: {0} Min. Dieser Vorgang kann bis zu {1} Min. dauern."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "In Microsoft Entra Hybrid eingebunden",
+ "activeDirectoryADLabel": "Microsoft Entra-Hybridbeitritt mit Autopilot",
+ "azureAD": "Mit Microsoft Entra verknüpft",
+ "unknownType": "Unbekannter Typ"
+ },
+ "Filter": {
+ "enrollmentState": "Zustand",
+ "profile": "Profilstatus"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "Der Anzeigename darf nicht leer sein."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Erstellen Sie eine Benennungsvorlage, um Ihren Geräten während der Registrierung Namen hinzuzufügen.",
+ "label": "Vorlage für Gerätenamen anwenden"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "Für hybrid verknüpfte Microsoft Entra-Typen von Autopilot-Bereitstellungsprofilen werden Geräte mithilfe der in der Konfiguration des Domänenbeitritts angegebenen Einstellungen benannt."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MeineFirma-%RAND:4%",
+ "label": "Namen eingeben",
+ "noDisallowedChars": "Der Name darf nur alphanumerische Zeichen, Bindestriche, %SERIAL% oder %RAND:x% enthalten.",
+ "serialLength": "Bei %SERIAL% dürfen höchstens 7 Zeichen verwendet werden.",
+ "validateLessThan15Chars": "Der Name darf höchstens 15 Zeichen umfassen.",
+ "validateNoSpaces": "Computernamen dürfen keine Leerzeichen enthalten.",
+ "validateNotAllNumbers": "Der Name muss auch Buchstaben und/oder Bindestriche enthalten.",
+ "validateNotEmpty": "Name darf nicht leer sein",
+ "validateOnlyOneMacro": "Der Name darf nur entweder %SERIAL% oder %RAND:x% enthalten."
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Erstellen Sie einen eindeutigen Namen für Ihre Geräte. Die Namen dürfen höchstens 15 Zeichen umfassen und nur Buchstaben (a–Z, A–Z), Ziffern (0–9) und Bindestriche enthalten. Namen dürfen nicht ausschließlich Ziffern enthalten. Verwenden Sie das Makro \"%SERIAL%\", um eine hardwarespezifische Seriennummer hinzuzufügen. Alternativ dazu können Sie über das Makro \"%RAND:x%\" eine zufällige Zeichenfolge von Ziffern hinzufügen, wobei x der hinzuzufügenden Anzahl von Ziffern entspricht."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Ermöglichen Sie durch fünfmaliges Drücken der Windows-Taste die Ausführung der Windows-Willkommensseite ohne Benutzerauthentifizierung, um das Gerät zu registrieren und alle Systemkontext-Apps und -einstellungen bereitzustellen. Benutzerkontext-Apps und -einstellungen werden übermittelt, wenn der Benutzer sich anmeldet.",
+ "label": "Vorab bereitgestellte Bereitstellung zulassen"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Der Autopilot Microsoft Entra-Hybridbeitrittsflow wird auch dann fortgesetzt, wenn während dem Schritt \"Windows-Willkommensseite\" keine Domänencontrollerkonnektivität hergestellt wird.",
+ "label": "AD-Konnektivitätsprüfung überspringen"
+ },
+ "accountType": "Art des Benutzerkontos",
+ "accountTypeInfo": "Geben Sie an, ob es sich bei den Benutzern um Administratoren oder Standardbenutzer für das Gerät handelt. Beachten Sie, dass diese Einstellung nicht für globale Administrator- oder Unternehmensadministratorkonten gilt. Diese Konten können keine Standardbenutzer sein, da sie Zugriff auf alle administrativen Funktionen in Microsoft Entra ID haben.",
+ "configOOBEInfo": "
\r\nKonfigurieren Sie die Willkommensseite für Ihre Autopilot-Geräte.\r\n
",
+ "configureDevice": "Bereitstellungsmodus",
+ "configureDeviceHintForSurfaceHub2": "Autopilot unterstützt für Surface Hub 2 nur den Self-Deployment-Modus. Dieser Modus ordnet den Benutzer nicht dem registrierten Gerät zu, deshalb sind keine Benutzeranmeldeinformationen erforderlich.",
+ "configureDeviceHintForWindowsPC": "
\r\n Der Bereitstellungsmodus steuert, ob Benutzer Anmeldeinformationen angeben müssen, um das Gerät bereitzustellen.\r\n
\r\n
\r\n
\r\n Benutzergesteuert: Geräte sind dem Benutzer zugeordnet, der das Gerät registriert, und zum Bereitstellen des Geräts sind Benutzeranmeldeinformationen erforderlich\r\n
\r\n
\r\n Selbstbereitstellung (Vorschau): Geräte sind nicht dem Benutzer zugeordnet, der das Gerät registriert, und zum Bereitstellen des Geräts sind keine Benutzeranmeldeinformationen erforderlich.\r\n
\r\n
",
+ "createSurfaceHub2Info": "Konfigurieren Sie die Autopilot-Registrierungseinstellungen für Ihre Surface Hub 2-Geräte. Autopilot ermöglicht standardmäßig das Überspringen der Benutzerauthentifizierung auf der Windows-Willkommensseite. Erfahren Sie mehr über Windows Autopilot für Surface Hub 2.",
+ "createWindowsPCInfo": "\r\n
\r\nFolgende Optionen werden für Autopilot-Geräte im Self-Deployment-Modus automatisch aktiviert:\r\n
\r\n
\r\n
\r\n Auswahl zur Nutzung am Arbeitsplatz oder zu Hause überspringen\r\n
\r\n
\r\n OEM-Registrierung und OneDrive-Konfiguration überspringen\r\n
\r\n
\r\n Benutzerauthentifizierung auf Windows-Willkommensseite überspringen\r\n
\r\n
",
+ "endUserDevice": "Benutzergesteuert",
+ "hideEscapeLink": "Optionen zur Kontoänderung ausblenden",
+ "hideEscapeLinkInfo": "Optionen zum Ändern des Kontos und zum Starten mit einem anderen Konto werden jeweils während der anfänglichen Geräteeinrichtung auf der Anmeldeseite des Unternehmens und auf der Seite mit Domänenfehlern angezeigt. Um diese Optionen auszublenden, müssen Sie das Unternehmensbranding in Microsoft Entra ID konfigurieren (erfordert Windows 10, 1809 oder höher oder Windows 11).",
+ "info": "Die AutoPilot-Profileinstellungen definieren die Willkommensseite, die den Benutzern beim ersten Start von Windows angezeigt wird. ",
+ "language": "Sprache (Region)",
+ "languageInfo": "Geben Sie die zu verwendende Sprache und Region an.",
+ "licenseAgreement": "Microsoft Software-Lizenzbedingungen",
+ "licenseAgreementInfo": "Hiermit wird angegeben, ob den Benutzern Lizenzbedingungen angezeigt werden.",
+ "plugAndForgetDevice": "Automatische Bereitstellung",
+ "privacySettingWarning": "Der Standardwert für die Sammlung von Diagnosedaten wurde für Geräte geändert, auf denen Windows 10, Version 1903 und höher, oder Windows 11 ausgeführt wird. ",
+ "privacySettings": "Datenschutzeinstellungen",
+ "privacySettingsInfo": "Hiermit wird angegeben, ob den Benutzern Datenschutzeinstellungen angezeigt werden.",
+ "showCortanaConfigurationPage": "Cortana-Konfiguration",
+ "showCortanaConfigurationPageInfo": "Bei Auswahl von \"Anzeigen\" wird die Einführung zur Cortana-Konfiguration beim Start aktiviert.",
+ "skipEULAWarning": "Wichtige Informationen zum Ausblenden von Lizenzbedingungen",
+ "skipKeyboardSelection": "Tastatur automatisch konfigurieren",
+ "skipKeyboardSelectionInfo": "Bei TRUE wird die Tastaturauswahlseite übersprungen, wenn die Sprache festgelegt ist.",
+ "subtitle": "AutoPilot-Profile",
+ "title": "Windows-Willkommensseite",
+ "useOSDefaultLanguage": "Betriebssystemstandard",
+ "userSelect": "Benutzerauswahl"
},
+ "Sync": {
+ "lastRequestedLabel": "Letzte Synchronisierungsanforderung",
+ "lastSuccessfulLabel": "Letzte erfolgreiche Synchronisierung",
+ "syncInProgress": "Es wird zurzeit eine Synchronisierung durchgeführt. Versuchen Sie es später noch mal.",
+ "syncInitiated": "Die Synchronisierung der AutoPilot-Einstellungen wurde initiiert.",
+ "syncSettingsTitle": "AutoPilot-Einstellungen synchronisieren"
+ },
+ "Title": {
+ "devices": "Windows AutoPilot-Geräte"
+ },
+ "Tooltips": {
+ "addressableUserName": "Name, der während der Geräteeinrichtung in der Begrüßung angezeigt wird.",
+ "azureADDevice": "Wechseln Sie zu den Gerätedetails für das zugeordnete Gerät. N/V bedeutet, dass kein Gerät zugeordnet ist.",
+ "batch": "Ein Zeichenfolgenattribut, das zum Identifizieren einer Gruppe von Geräten verwendet werden kann. Das Gruppentagfeld von Intune ist dem OrderID-Attribut auf Microsoft Entra-Geräten zugeordnet.",
+ "dateAssigned": "Zeitstempel, der angibt, wann das Profil dem Gerät zugewiesen wurde.",
+ "deviceAccountPwd": "Kennwort des Gerätekontos für Surface Hub Geräte. Geben Sie bei Eingabe auch das Gerätekonto und den Anzeigenamen ein.",
+ "deviceAccountUpn": "E-Mail-Adresse des Gerätekontos für Surface Hub-Geräte. Geben Sie bei Eingabe auch das Kennwort und den Anzeigenamen des Gerätekontos ein.",
+ "deviceDisplayName": "Eindeutigen Namen für ein Gerät konfigurieren Dieser Name wird mit hybrid verknüpften Microsoft Entra-Bereitstellungen ignoriert. Der Gerätename stammt weiterhin aus dem Domänenbeitrittsprofil für Microsoft Entra-Hybridgeräte.",
+ "deviceFriendlyName": "Anzeigename des Geräts für Surface Hub Geräte. Geben Sie bei Eingabe auch das Gerätekonto und das Kennwort für das Gerätekonto ein.",
+ "deviceName": "Der angezeigte Name, wenn jemand versucht hat, das Gerät zu ermitteln und eine Verbindung herzustellen.",
+ "deviceUseType": " Das Gerät wird basierend auf Ihrer Auswahl eingerichtet. Sie können die Einstellungen später jederzeit ändern.\r\n
\r\n
Für Besprechungen und Präsentationen ist Windows Hello nicht aktiviert, und die Daten werden nach jeder Sitzung entfernt.\r\n
\r\n
Für die Teamzusammenarbeit ist Windows Hello aktiviert, und Profile werden für die schnelle Anmeldung gespeichert.
\r\n
",
+ "enrollmentState": "Gibt an, ob das Gerät registriert wurde.",
+ "intuneDevice": "Wechseln Sie zu den Gerätedetails für das zugeordnete Gerät. N/V bedeutet, dass kein Gerät zugeordnet ist.",
+ "lastContacted": "Zeitstempel, der angibt, wann das Gerät zuletzt kontaktiert wurde.",
+ "make": "Hersteller des ausgewählten Geräts.",
+ "model": "Modell des ausgewählten Geräts",
+ "profile": "Name des Profils, das dem Gerät zugewiesen ist.",
+ "profileStatus": "Gibt an, ob dem Gerät ein Profil zugewiesen ist.",
+ "purchaseOrderId": "Bestell-ID",
+ "resourceAccount": "Die Identität des Geräts oder der Benutzerprinzipalname (UPN).",
+ "serialNumber": "Seriennummer des ausgewählten Geräts.",
+ "userPrincipalName": "Benutzer, der während der Geräteeinrichtung vorab für die Authentifizierung ausgefüllt wird."
+ },
+ "allDevices": "Nicht alle Geräte",
+ "allDevicesAlreadyAssignedError": "Es wurde allen Geräten bereits ein Autopilot-Profil zugewiesen.",
+ "assignFailedDescription": "Fehler beim Aktualisieren von Zuweisungen für {0}.",
+ "assignFailedTitle": "Fehler beim Aktualisieren von AutoPilot-Profilzuweisungen.",
+ "assignSuccessDescription": "Die Zuweisungen für {0} wurden erfolgreich aktualisiert.",
+ "assignSuccessTitle": "Die AutoPilot-Profilzuweisungen wurden erfolgreich aktualisiert.",
+ "assignSufaceHub2ProfileNextStep": "Nächste Schritte für diese Bereitstellung",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Weisen Sie dieses Profil mindestens einer Gerätegruppe zu.",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Weisen Sie jedem Surface Hub-Gerät, auf dem Sie dieses Profil bereitstellen, ein Ressourcenkonto zu.",
+ "assignedDevicesCount": "Zugewiesene Geräte",
+ "assignedDevicesResourceAccountDescription": "
Um dieses Profil auf einem Gerät bereitzustellen, müssen Sie dem Gerät ein Ressourcenkonto zuweisen. Wählen Sie jeweils ein Gerät pro Arbeitsschritt aus, um ein vorhandenes Ressourcenkonto zuzuweisen oder ein neues Ressourcenkonto zu erstellen. Weitere Informationen zu Ressourcenkonten
",
+ "assignedDevicesResourceAccountStatusBarMessage": "Diese Tabelle listet nur die Surface Hub 2-Geräte auf, denen dieses Profil zugewiesen wurde.",
+ "assigningDescription": "Die Zuweisungen für {0} werden aktualisiert.",
+ "assigningTitle": "Die AutoPilot-Profilzuweisungen werden aktualisiert.",
+ "autoremediationContext": "Wir haben auf diesem Gerät eine Hardwareänderung erkannt. Wir versuchen, die neue Hardware automatisch zu registrieren. Sie müssen jetzt nichts tun. Der Status wird beim nächsten Einchecken mit dem Ergebnis aktualisiert. Weitere Informationen über das Zurücksetzen des Profils.",
+ "autoremediationTitle": "Für das Gerät {0} steht ein Fix aus.",
+ "cannotDeleteMessage": "Dieses Profil ist Gruppen zugewiesen. Sie müssen die Zuweisung zu allen Gruppen aufheben, bevor Sie das Profil löschen können.",
+ "cannotDeleteTitle": "\"{0}\" kann nicht gelöscht werden",
+ "createdDateTime": "Erstellt",
+ "deleteMessage": "Wenn Sie dieses AutoPilot-Profil löschen, wird für alle diesem Profil zugewiesenen Geräte der Status \"Nicht zugewiesen\" angezeigt.",
+ "deleteMessageWithPolicySet": "\"{0}\" ist in mindestens einem Richtliniensatz enthalten. Wenn Sie \"{0}\" löschen, können Sie das Profil nicht mehr über diese Richtliniensätze zuweisen.",
+ "deleteTitle": "Möchten Sie dieses Profil löschen?",
+ "description": "Beschreibung",
+ "deviceType": "Gerätetyp",
+ "deviceUse": "Geräteverwendung",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot unterstützt nur Microsoft Entra-Einbindung für Surface Hub 2-Geräte. Geben Sie an, wie Geräte in Ihrer Organisation mit Active Directory (AD) verknüpft werden.\r\n
\r\n
\r\n
\r\n Mit Microsoft Entra verknüpft: Nur Cloud ohne lokale Windows Server Active Directory-Instanz.\r\n
\r\n Geben Sie an, wie Geräte in Ihrer Organisation Active Directory (AD) beitreten:\r\n
\r\n
\r\n
\r\n Mit Microsoft Entra verknüpft: Nur Cloud, ohne lokale Windows Server Active Directory-Umgebung\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Fehler beim Abrufen der Anzahl zugewiesener Geräte.",
+ "getAssignmentsError": "Fehler beim Abrufen der AutoPilot-Profilzuweisungen.",
+ "harvestDeviceId": "Alle Zielgeräte in Autopilot-Geräte konvertieren",
+ "harvestDeviceIdDescription": "Standardmäßig kann dieses Profil nur auf Autopilot-Geräte angewendet werden, die vom Autopilot-Dienst synchronisiert werden.",
+ "harvestDeviceIdInfo": "\r\n Wählen Sie \"Ja\" aus, um alle Zielgeräte für Autopilot zu registrieren (sofern noch nicht geschehen). Wenn registrierte Geräte das nächste Mal durch die Willkommensseite geführt werden, wird das zugewiesene Autopilot-Szenario durchlaufen.\r\n \r\n Beachten Sie, dass bestimmte Autopilot-Szenarien spezifische Windows-Mindestbuilds erfordern. Stellen Sie sicher, dass Ihr Gerät über den erforderlichen Mindestbuild verfügt, um das Szenario zu durchlaufen.\r\n \r\n Durch das Entfernen dieses Profils werden die betroffenen Geräte nicht aus Autopilot entfernt. Um ein Gerät aus Autopilot zu entfernen, verwenden Sie die Ansicht für Windows Autopilot-Geräte.\r\n ",
+ "harvestDeviceIdWarning": "Nach der Konvertierung können Autopilot-Geräte nur wiederhergestellt werden, indem Sie sie aus der Liste der Autopilot-Geräte löschen.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Mit den Windows AutoPilot Deployment-Profilen können Sie die Willkommensseite für Ihre Geräte anpassen.",
+ "invalidProfileNameMessage": "Das Zeichen \"{0}\" ist nicht zulässig.",
+ "joinTypeLabel": "Microsoft Entra-ID beitreten als",
+ "lastModifiedDateTime": "Zuletzt geändert:",
+ "manualRemediationContext": "Wir haben auf diesem Gerät eine Hardwareänderung erkannt. Es erhält beim Zurücksetzen nicht automatisch ein Autopilot-Profil, es sei denn, Sie registrieren das Gerät erneut. Weitere Informationen über das Zurücksetzen des Profils.",
+ "manualRemediationTitle": "Das Gerät {0} erfordert Ihre Aufmerksamkeit.",
+ "name": "Name",
+ "noAutopilotProfile": "Keine AutoPilot-Profile.",
+ "notEnoughPermissionAssignedError": "Ihre Berechtigungen reichen nicht aus, um dieses Profil mindestens einer der ausgewählten Gruppen zuzuweisen. Wenden Sie sich an Ihren Administrator.",
+ "profile": "Profil",
+ "resourceAccountStatusBarMessage": "Ein Ressourcenkonto ist für jedes Surface Hub 2-Gerät erforderlich, für das dieses Profil bereitgestellt wird. Klicken Sie hier, um mehr zu erfahren.",
+ "selectServices": "Verzeichnisdienst auswählen, dem Geräte beitreten sollen",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Bereitstellungsmodus",
+ "windowsPCCommandMenu": "Windows-PC",
+ "directoryServiceLabel": "Microsoft Entra ID beitreten als"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Verwaltete Geräte",
+ "devicesWithoutEnrollment": "Verwaltete Apps"
+ },
+ "AppProtection": {
+ "allAppTypes": "Auf alle App-Typen ausrichten",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Apps in Android for Work-Profil",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps auf dedizierten Android Enterprise-Geräten mit Microsoft Entra-Modus zur gemeinsamen Nutzung",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Projektbenutzer zugeordnete Apps unter Android Open Source",
+ "appsOnAndroidOpenSourceProjectUserless": "Projektbenutzerlose Apps unter Android Open Source",
+ "appsOnIntuneManagedDevices": "Apps auf durch Intune verwalteten Geräten",
+ "appsOnUnmanagedDevices": "Apps auf nicht verwalteten Geräten",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Nicht verfügbar",
+ "windows10PlatformLabel": "Windows 10 und höher",
+ "withEnrollment": "Mit Registrierung",
+ "withoutEnrollment": "Ohne Registrierung"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Projekt Online-Desktopclient",
+ "visioProRetail": "Visio Online-Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Fehler beim Löschen von {0}",
+ "failureCa": "Fehler beim Löschen von {0}, da ZS-Richtlinien darauf verweisen.",
+ "modifying": "{0} wird gelöscht.",
+ "success": "{0} erfolgreich gelöscht"
+ },
+ "Notify": {
+ "failure": "Fehler beim Aktualisieren von \"{0}\".",
+ "modifying": "\"{0}\" wird geändert",
+ "success": "\"{0}\" erfolgreich aktualisiert"
+ },
+ "menuLabel": "Authentifizierungskontext"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Erfahren Sie mehr über die Anforderung von Authentifizierungsmethoden, die von Verbundanbietern erfüllt werden.",
+ "certificate": "Zertifikatauthentifizierung",
+ "infoBubble": "Geben Sie eine erforderliche Authentifizierungsmethode an, die vom Verbundanbieter, z. B. AD FS, erfüllt werden muss.",
+ "multifactor": "Multi-Faktor-Authentifizierung",
+ "require": "Verbundauthentifizierungsmethode erforderlich (Vorschau)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Die Richtlinie für persistente Browsersitzungen funktioniert nur dann ordnungsgemäß, wenn \"Alle Cloud-Apps\" ausgewählt ist. Aktualisieren Sie Ihre Cloud-Apps-Auswahl."
+ },
+ "Option": {
+ "always": "Immer persistent",
+ "help": "Bei einer persistenten Browsersitzung können Benutzer nach dem Schließen und erneuten Öffnen ihres Browserfensters angemeldet bleiben. \n
\n
Diese Einstellung funktioniert ordnungsgemäß, wenn \"Alle Cloud-Apps\" ausgewählt ist.
\n
Diese Einstellung hat keine Auswirkungen auf die Tokenlebensdauer oder auf die Einstellung für die Anmeldehäufigkeit.
\n
Hiermit wird die Richtlinie zum Anzeigen der Option \"Angemeldet bleiben\" im Unternehmensbranding außer Kraft gesetzt.
\n
\"Niemals persistent\" setzt Ansprüche auf persistentes einmaliges Anmelden von Verbundauthentifizierungsdiensten außer Kraft.
\n
\"Niemals persistent\" verhindert auf mobilen Geräten das einmalige Anmelden zwischen verschiedenen Anwendungen sowie zwischen Anwendungen und dem mobilen Browser des Benutzers.
\n",
+ "label": "Beständige Browsersitzung",
+ "never": "Niemals persistent"
+ },
+ "Warning": {
+ "allApps": "\"Persistente Browsersitzung\" funktioniert nur dann ordnungsgemäß, wenn \"Alle Cloud-Apps\" ausgewählt ist. Ändern Sie Ihre Cloud-Apps-Auswahl. Klicken Sie hier, um weitere Informationen zu erhalten."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Stunden oder Tage",
+ "value": "Häufigkeit"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} Tage",
+ "singular": "1 Tag"
+ },
+ "Hour": {
+ "plural": "{0} Stunden",
+ "singular": "1 Stunde"
+ },
+ "daysOption": "Tage",
+ "everytime": "Jedes Mal",
+ "help": "Zeitraum, bis ein Benutzer bei dem Versuch, auf eine Ressource zuzugreifen, zur erneuten Anmeldung aufgefordert wird. Die Standardeinstellung ist ein rollierendes Zeitfenster von 90 Tagen, d. h., Benutzer werden zur erneuten Authentifizierung aufgefordert, wenn sie auf ihrem Computer nach einer Inaktivität von 90 Tagen oder länger erstmals auf eine Ressource zuzugreifen versuchen.",
+ "hoursOption": "Stunden",
+ "label": "Anmeldehäufigkeit",
+ "placeholder": "Einheiten auswählen"
+ }
+ },
+ "mainOption": "Sitzungsdauer ändern",
+ "mainOptionHelp": "Konfigurieren Sie, wie oft Benutzer zur Eingabe aufgefordert werden, und gibt an, ob Browsersitzungen dauerhaft gespeichert werden. Von Anwendungen, die moderne Authentifizierungsprotokolle nicht unterstützen, werden diese Richtlinien möglicherweise nicht berücksichtigt. Wenden Sie sich in diesem Fall an den Anwendungsentwickler."
+ },
+ "SingleSelectorActive": {
+ "failed": "Diese Daten konnten nicht geladen werden.",
+ "reattempt": "Daten werden geladen. {0} von {1} erneuten Versuchen."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Verzeichnisrollen auswählen"
+ },
+ "Excluded": {
+ "gridAria": "Liste ausgeschlossener Benutzer"
+ },
+ "Included": {
+ "gridAria": "Liste eingeschlossener Benutzer"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Verzeichnisrollen\" umfasst mindestens eine benutzerdefinierte Rolle.",
+ "customRoleSelected": "Es wurde mindestens eine benutzerdefinierte Rolle ausgewählt.",
+ "failed": "\"{0}\" muss konfiguriert werden.",
+ "roles": "Wählen Sie mindestens eine Rolle aus.",
+ "usersGroups": "Wählen Sie mindestens einen Benutzer oder eine Gruppe aus."
+ },
+ "learnMore": "Steuern Sie den Zugriff basierend darauf, für wen die Richtlinie gelten wird, z. B. Benutzer und Gruppen, Workloadidentitäten, Verzeichnisrollen oder externe Gäste."
+ },
+ "advancedTabText": "Erweitert",
+ "allCloudAppsErrorBox": "\"Alle Cloud-Apps\" muss ausgewählt werden, wenn die Zuweisung \"Kennwortänderung anfordern\" ausgewählt ist.",
+ "allCloudAppsReauth": "„Alle Cloud-Apps“ muss ausgewählt werden, wenn die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ und die Bedingung „Anmelderisiko“ ausgewählt sind.",
+ "allCloudOrSpecificApps": "Für die Sitzungssteuerung \"Anmeldehäufigkeit jedes Mal\" muss \"alle Cloud-Apps\" oder speziell unterstützte Apps ausgewählt werden.",
+ "allDayCheckboxLabel": "Ganztägig",
+ "allDevicePlatforms": "Jedes Gerät",
+ "allGuestUserInfoContent": "Umfasst Microsoft Entra B2B-Gäste, aber keine SharePoint B2B-Gäste",
+ "allGuestUserLabel": "Alle Gast- und externen Benutzer",
+ "allRiskLevelsOption": "Alle Risikostufen",
+ "allTrustedLocationLabel": "Alle vertrauenswürdigen Standorte",
+ "allUserGroupSetSelectorLabel": "Alle ausgewählten Benutzer und Gruppen",
+ "allUsersReauth": "Für das Sitzungssteuerelement \"Anmeldehäufigkeit jedes Mal\" muss \"Alle Benutzer\" ausgewählt sein.",
+ "allUsersString": "Alle Benutzer",
+ "and": "{0} UND {1} ",
+ "andWithGrouping": "({0}) UND {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Cloud-app",
+ "appContextOptionInfoContent": "Angefordertes Authentifizierungstag",
+ "appContextOptionLabel": "Angefordertes Authentifizierungstag (Vorschau)",
+ "appContextUriPlaceholder": "Beispiel: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Für von der App erzwungene Einschränkungen sind möglicherweise zusätzliche Administratorkonfigurationen innerhalb der Cloud-Apps erforderlich. Die Einschränkungen treten nur für neue Sitzungen in Kraft.",
+ "appNotSetSeletorLabel": "0 Cloud-Apps ausgewählt",
+ "appReauthNotSupported": "Diese App unterstützt die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ nicht.",
+ "applyConditionClientAppInfoBalloonContent": "Konfigurieren Sie Client-Apps, um die Richtlinie auf bestimmte Client-Apps anzuwenden.",
+ "applyConditionDevicePlatformInfoBalloonContent": "Konfigurieren Sie Geräteplattformen, um die Richtlinie auf bestimmte Plattformen anzuwenden.",
+ "applyConditionDeviceStateInfoBalloonContent": "Konfigurieren Sie den Gerätezustand, um die Richtlinie auf bestimmte Gerätezustände anzuwenden.",
+ "applyConditionLocationInfoBalloonContent": "Konfigurieren Sie Standorte, um die Richtlinie auf vertrauenswürdige/nicht vertrauenswürdige Standorte anzuwenden.",
+ "applyConditionSigninRiskInfoBalloonContent": "Konfigurieren Sie das Anmelderisiko, um die Richtlinie auf ausgewählte Risikostufen anzuwenden.",
+ "applyConditionUserRiskInfoBalloonContent": "Konfigurieren Sie das Benutzerrisiko, um die Richtlinie auf ausgewählte Risikostufen anzuwenden.",
+ "applyConditonLabel": "Konfigurieren",
+ "ariaLabelPolicyDisabled": "Richtlinie ist deaktiviert",
+ "ariaLabelPolicyEnabled": "Die Richtlinie ist aktiviert.",
+ "ariaLabelPolicyReportOnly": "Die Richtlinie befindet sich im reinen Berichtmodus.",
+ "blockAccess": "Zugriff blockieren",
+ "builtInDirectoryRoleLabel": "Integrierte Verzeichnisrollen",
+ "casCustomControlInfo": "Benutzerdefinierte Richtlinien müssen im Cloud App Security-Portal konfiguriert werden. Dieses Steuerelement funktioniert sofort für ausgewählte Apps und kann für jede App selbst integriert werden. Klicken Sie hier, um weitere Informationen zu beiden Szenarien zu erhalten.",
+ "casInfoBubble": "Dieses Steuerelement funktioniert für verschiedene Cloud-Apps.",
+ "casPreconfiguredControlInfo": "Dieses Steuerelement funktioniert sofort für ausgewählte Apps und kann für jede App selbst integriert werden. Klicken Sie hier, um weitere Informationen zu beiden Szenarien zu erhalten.",
+ "cert64DownloadCol": "Base64-Zertifikat herunterladen",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Zertifikat herunterladen",
+ "certDurationCol": "Ablauf",
+ "certDurationStartCol": "Gültig ab",
+ "certName": "VpnCert",
+ "certainApps": "Nur bestimmte Apps werden für die „Anmeldehäufigkeit jedes Mal“ unterstützt, wenn die Zuweisungen „Multi-Faktor-Authentifizierung erfordern“ und „Kennwortänderung erfordern“ nicht ausgewählt sind.",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Anwendungen wählen",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Gewählte Anwendungen",
+ "chooseApplicationsEmpty": "Keine Anwendungen",
+ "chooseApplicationsNone": "Kein",
+ "chooseApplicationsNoneFound": "Wir haben \"{0}\" nicht gefunden. Versuchen Sie es mit einem anderen Namen oder einer anderen ID.",
+ "chooseApplicationsPlural": "\"{0}\" und {1} weitere",
+ "chooseApplicationsReAuthEverytimeInfo": "Suchen Sie nach Ihrer App? Einige Anwendungen können nicht mit Wert „Erneute Authentifizierung erforderlich – jedes Mal“ des Sitzungssteuerelements verwendet werden.",
+ "chooseApplicationsRemove": "Entfernen",
+ "chooseApplicationsReturnedPlural": "{0} Anwendungen gefunden",
+ "chooseApplicationsReturnedSingular": "1 Anwendung gefunden",
+ "chooseApplicationsSearchBalloon": "Suchen Sie nach einer Anwendung, indem Sie ihren Namen oder ihre ID eingeben.",
+ "chooseApplicationsSearchHint": "Anwendungen suchen...",
+ "chooseApplicationsSearchLabel": "Anwendungen",
+ "chooseApplicationsSearching": "Suche wird ausgeführt...",
+ "chooseApplicationsSelect": "Auswählen",
+ "chooseApplicationsSelected": "Ausgewählt",
+ "chooseApplicationsSingular": "{0} und 1 weitere",
+ "chooseApplicationsTooMany": "Weitere Ergebnisse können angezeigt werden. Filtern Sie anhand des Suchfelds.",
+ "chooseLocationCorpnetItem": "Unternehmensnetzwerk",
+ "chooseLocationSelectedLocationsLabel": "Ausgewählte Standorte",
+ "chooseLocationTrustedIpsItem": "Vertrauenswürdige IP-Adressen für Multi-Faktor-Authentifizierung",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Standorte auswählen",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Ausgewählte Standorte",
+ "chooseLocationsEmpty": "Keine Speicherorte",
+ "chooseLocationsExcludedSelectorTitle": "Auswählen",
+ "chooseLocationsIncludedSelectorTitle": "Auswählen",
+ "chooseLocationsNone": "Kein",
+ "chooseLocationsNoneFound": "Wir haben \"{0}\" nicht gefunden. Versuchen Sie es mit einem anderen Namen oder einer anderen ID.",
+ "chooseLocationsPlural": "\"{0}\" und {1} weitere",
+ "chooseLocationsRemove": "Entfernen",
+ "chooseLocationsReturnedPlural": "{0} Standorte gefunden",
+ "chooseLocationsReturnedSingular": "1 Standort gefunden",
+ "chooseLocationsSearchBalloon": "Suchen Sie nach einem Standort, indem Sie seinen Namen eingeben.",
+ "chooseLocationsSearchHint": "Suche nach Standorten...",
+ "chooseLocationsSearchLabel": "Speicherorte",
+ "chooseLocationsSearching": "Suche wird ausgeführt...",
+ "chooseLocationsSelect": "Auswählen",
+ "chooseLocationsSelected": "Ausgewählt",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Auswählen",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Auswählen",
+ "chooseLocationsSingular": "{0} und 1 weitere",
+ "chooseLocationsTooMany": "Weitere Ergebnisse können angezeigt werden. Filtern Sie anhand des Suchfelds.",
+ "claimProviderAddCommandText": "Neues benutzerdefiniertes Steuerelement",
+ "claimProviderAddNewBladeTitle": "Neues benutzerdefiniertes Steuerelement",
+ "claimProviderDeleteCommand": "Löschen",
+ "claimProviderDeleteDescription": "Möchten Sie \"{0}\" löschen? Diese Aktion kann nicht rückgängig gemacht werden.",
+ "claimProviderDeleteTitle": "Sind Sie sicher?",
+ "claimProviderEditInfoText": "Geben Sie die JSON für benutzerdefinierte Steuerelemente ein, die von Ihren Anspruchsanbietern bereitgestellt wird.",
+ "claimProviderNotificationCreateDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wird erstellt.",
+ "claimProviderNotificationCreateFailedDescription": "Fehler beim Erstellen des benutzerdefinierten Steuerelements \"{0}\". Versuchen Sie es später noch mal.",
+ "claimProviderNotificationCreateFailedTitle": "Fehler beim Erstellen von benutzerdefiniertem Steuerelement",
+ "claimProviderNotificationCreateSuccessDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wurde erstellt.",
+ "claimProviderNotificationCreateSuccessTitle": "\"{0}\" wurde erstellt",
+ "claimProviderNotificationCreateTitle": "\"{0}\" wird erstellt",
+ "claimProviderNotificationDeleteDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wird gelöscht.",
+ "claimProviderNotificationDeleteFailedDescription": "Fehler beim Löschen des benutzerdefinierten Steuerelements \"{0}\". Versuchen Sie es später noch mal.",
+ "claimProviderNotificationDeleteFailedTitle": "Fehler beim Löschen von benutzerdefiniertem Element",
+ "claimProviderNotificationDeleteSuccessDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wurde gelöscht.",
+ "claimProviderNotificationDeleteSuccessTitle": "\"{0}\" wurde gelöscht",
+ "claimProviderNotificationDeleteTitle": "\"{0}\" wird gelöscht.",
+ "claimProviderNotificationUpdateDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wird aktualisiert.",
+ "claimProviderNotificationUpdateFailedDescription": "Fehler beim Aktualisieren des benutzerdefinierten Steuerelements \"{0}\". Versuchen Sie es später noch mal.",
+ "claimProviderNotificationUpdateFailedTitle": "Fehler beim Aktualisieren von benutzerdefiniertem Steuerelement",
+ "claimProviderNotificationUpdateSuccessDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wurde aktualisiert.",
+ "claimProviderNotificationUpdateSuccessTitle": "\"{0}\" wurde aktualisiert",
+ "claimProviderNotificationUpdateTitle": "\"{0}\" wird aktualisiert",
+ "claimProviderValidationAppIdInvalid": "Der AppId-Wert ist ungültig. Überprüfen Sie ihn, und versuchen Sie es noch mal.",
+ "claimProviderValidationClientIdMissing": "Bei den Daten fehlt ein ClientId-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationControlClaimsRequestedMissing": "Bei \"Control\" fehlt ein ClaimsRequested-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "Dem Element \"ClaimsRequested\" fehlt ein Type-Wert. Überprüfen Sie das Element, und versuchen Sie es noch mal.",
+ "claimProviderValidationControlIdAlreadyExists": "Der Id-Wert von \"Control\" ist bereits vorhanden. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationControlIdMissing": "Bei \"Control\" fehlt ein Id-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "Der Id-Wert von \"Control\" kann nicht entfernt werden, weil eine vorhandene Richtlinie darauf verweist. Entfernen Sie ihn zuerst aus der Richtlinie.",
+ "claimProviderValidationControlIdTooManyControls": "Die Eigenschaft \"Control\" weist zu viele Steuerelemente auf. Überprüfen Sie die Eigenschaft, und versuchen Sie es noch mal.",
+ "claimProviderValidationControlIdValueReserved": "Der Id-Wert von \"Control\" ist ein reserviertes Schlüsselwort, verwenden Sie eine andere ID.",
+ "claimProviderValidationControlNameAlreadyExists": "Der Name-Wert von \"Control\" ist bereits vorhanden. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationControlNameMissing": "Bei \"Control\" fehlt ein Name-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationControlsMissing": "Bei den Daten fehlt ein Controls-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationDiscoveryUrlMissing": "Bei den Daten fehlt ein DiscoveryUrl-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationInvalid": "Die bereitgestellten Daten sind ungültig. Überprüfen Sie sie, und versuchen Sie es noch mal.",
+ "claimProviderValidationInvalidJsonDefinition": "Das benutzerdefinierte Steuerelement kann nicht gespeichert werden. Prüfen Sie den JSON-Text, und versuchen Sie es noch mal.",
+ "claimProviderValidationNameAlreadyExists": "Der Name-Wert ist bereits vorhanden. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationNameMissing": "Bei den Daten fehlt ein Name-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
+ "claimProviderValidationUnknown": "Unbekannter Fehler beim Überprüfen der bereitgestellten Daten. Überprüfen Sie sie, und versuchen Sie es noch mal.",
+ "claimProvidersNone": "Keine benutzerdefinierten Steuerelemente",
+ "claimProvidersSearchPlaceholder": "Durchsuchen Sie die Steuerelemente.",
+ "classicPoilcyFilterTitle": "Zeigen",
+ "classicPolicyAllPlatforms": "Alle Plattformen",
+ "classicPolicyClientAppBrowserAndNative": "Browser, mobile Apps und Desktopclients",
+ "classicPolicyCloudAppTitle": "Cloudanwendung",
+ "classicPolicyControlAllow": "Zulassen",
+ "classicPolicyControlBlock": "Blockieren",
+ "classicPolicyControlBlockWhenNotAtWork": "Zugriff blockieren, wenn nicht gearbeitet wird",
+ "classicPolicyControlRequireCompliantDevice": "Erfordert kompatibles Gerät",
+ "classicPolicyControlRequireDomainJoinedDevice": "In Domäne eingebundenes Gerät anfordern",
+ "classicPolicyControlRequireMfa": "Multi-Faktor-Authentifizierung erfordern",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Multi-Faktor-Authentifizierung erfordern, wenn nicht bei der Arbeit",
+ "classicPolicyDeleteCommand": "Löschen",
+ "classicPolicyDeleteFailTitle": "Fehler beim Löschen der klassischen Richtlinie",
+ "classicPolicyDeleteInProgressTitle": "Klassische Richtlinie wird gelöscht",
+ "classicPolicyDeleteSuccessTitle": "Klassische Richtlinie gelöscht",
+ "classicPolicyDetailBladeTitle": "Details",
+ "classicPolicyDisableCommand": "Deaktivieren",
+ "classicPolicyDisableConfirmation": "Möchten Sie \"{0}\" deaktivieren? Diese Aktion kann nicht rückgängig gemacht werden.",
+ "classicPolicyDisableFailDescription": "Fehler beim Deaktivieren von \"{0}\".",
+ "classicPolicyDisableFailTitle": "Fehler beim Deaktivieren der klassischen Richtlinie",
+ "classicPolicyDisableInProgressDescription": "\"{0}\" wird deaktiviert.",
+ "classicPolicyDisableInProgressTitle": "Klassische Richtlinie wird deaktiviert",
+ "classicPolicyDisableSuccessDescription": "\"{0}\" wurde erfolgreich deaktiviert.",
+ "classicPolicyDisableSuccessTitle": "Klassische Richtlinie deaktiviert",
+ "classicPolicyEasSupportedPlatforms": "Von Exchange ActiveSync unterstützte Plattformen",
+ "classicPolicyEasUnsupportedPlatforms": "Von Exchange ActiveSync nicht unterstützte Plattformen",
+ "classicPolicyExcludedPlatformsTitle": "Ausgeschlossene Geräteplattformen",
+ "classicPolicyFilterAll": "Alle Richtlinien",
+ "classicPolicyFilterDisabled": "Deaktivierte Richtlinien",
+ "classicPolicyFilterEnabled": "Aktivierte Richtlinien",
+ "classicPolicyIncludeExcludeMembersDescription": "Durch das Ausschließen von Gruppen können Sie Richtlinien in Phasen migrieren.",
+ "classicPolicyIncludeExcludeMembersTitle": "Gruppen einschließen/ausschließen",
+ "classicPolicyIncludedPlatformsTitle": "Eingeschlossene Geräteplattformen",
+ "classicPolicyManualMigrationMessage": "Diese Richtlinie muss manuell migriert werden.",
+ "classicPolicyMigrateCommand": "Migrieren",
+ "classicPolicyMigrateConfirmation": "Möchten Sie \"{0}\" migrieren? Diese Richtlinie kann nur einmal migriert werden.",
+ "classicPolicyMigrateFailDescription": "Fehler bei der Migration von \"{0}\".",
+ "classicPolicyMigrateFailTitle": "Fehler beim Migrieren der klassischen Richtlinie",
+ "classicPolicyMigrateInProgressDescription": "\"{0}\" wird migriert.",
+ "classicPolicyMigrateInProgressTitle": "Klassische Richtlinie wird migriert",
+ "classicPolicyMigrateRecommendText": "Empfehlung: Führen Sie eine Migration zu den neuen Azure-Portalrichtlinien durch.",
+ "classicPolicyMigrateSuccessTitle": "Klassische Richtlinie erfolgreich migriert",
+ "classicPolicyMigratedSuccessDescription": "Diese klassische Richtlinie kann jetzt unter \"Richtlinien\" verwaltet werden.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "Diese klassische Richtlinie wurde in {0} neue Richtlinien migriert. Neue Richtlinien können unter \"Richtlinien\" verwaltet werden.",
+ "classicPolicyNoEditPermissionMsg": "Sie haben keine Berechtigung zum Bearbeiten dieser Richtlinie. Nur globale Administratoren und Sicherheitsadministratoren können die Richtlinie bearbeiten. Klicken Sie hier, um weitere Informationen zu erhalten.",
+ "classicPolicySaveFailDescription": "Fehler beim Speichern von \"{0}\".",
+ "classicPolicySaveFailTitle": "Fehler beim Speichern der klassischen Richtlinien",
+ "classicPolicySaveInProgressDescription": "\"{0}\" wird gespeichert.",
+ "classicPolicySaveInProgressTitle": "Klassische Richtlinie wird gespeichert",
+ "classicPolicySaveSuccessDescription": "\"{0}\" wurde erfolgreich gespeichert.",
+ "classicPolicySaveSuccessTitle": "Klassische Richtlinie gespeichert",
+ "clientAppBladeLegacyInfoBanner": "Die Legacyauthentifizierung wird zurzeit nicht unterstützt.",
+ "clientAppBladeLegacyUpsellBanner": "Nicht unterstützte Client-Apps blockieren (Vorschau)",
+ "clientAppBladeTitle": "Client-Apps",
+ "clientAppDescription": "Wählen Sie die Client-Apps aus, auf die diese Richtlinie angewendet wird.",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Alle übrigen Bedingungen werden von Exchange ActiveSync zurzeit nicht unterstützt.",
+ "clientAppLearnMore": "Steuern Sie den Benutzerzugriff für bestimmte Clientanwendungen, die keine moderne Authentifizierung verwenden.",
+ "clientAppLegacyHeader": "Legacy-Authentifizierungsclients",
+ "clientAppMobileDesktop": "Mobile Apps und Desktopclients",
+ "clientAppModernHeader": "Clients mit moderner Authentifizierung",
+ "clientAppOnlySupportedPlatforms": "Richtlinie nur auf unterstützte Plattformen anwenden",
+ "clientAppSelectSpecificClientApps": "Client-Apps auswählen",
+ "clientAppWebBrowser": "Browser",
+ "clientAppsSelectedLabel": "{0} eingeschlossen",
+ "clientTypeBrowser": "Browser",
+ "clientTypeEas": "Exchange ActiveSync-Clients",
+ "clientTypeEasInfo": "Exchange ActiveSync-Clients, die nur die Legacyauthentifizierung verwenden.",
+ "clientTypeModernAuth": "Clients mit moderner Authentifizierung",
+ "clientTypeOtherClients": "Andere Clients",
+ "clientTypeOtherClientsInfo": "Dies schließt ältere Office-Clients und weitere E-Mail-Protokolle (POP, IMAP, SMTP usw.) ein. [Weitere Informationen][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "{0} der in dieser Richtlinie konfigurierten Cloud-Apps wurden aus dem Verzeichnis gelöscht, aber dies wirkt sich nicht auf die weiteren Apps in der Richtlinie aus. Beim nächsten Aktualisieren des Anwendungsabschnitts der Richtlinie werden die gelöschten Apps automatisch entfernt.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Alle Microsoft-Apps",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Cloud-, Desktop- und mobile Apps von Microsoft zulassen (Vorschau)",
+ "cloudappsSelectionBladeAllCloudapps": "Alle Cloud-Apps",
+ "cloudappsSelectionBladeExcludeDescription": "Wählen Sie die Cloud-Apps aus, die von der Richtlinie ausgenommen werden sollen.",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Ausgeschlossene Cloud-Apps auswählen",
+ "cloudappsSelectionBladeIncludeDescription": "Hiermit werden die Cloud-Apps ausgewählt, auf die die Richtlinie angewendet wird.",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Auswählen",
+ "cloudappsSelectionBladeSelectedCloudapps": "Apps auswählen",
+ "cloudappsSelectorInfoBallonText": "Dienste, auf die der Benutzer im Rahmen seiner Arbeit zugreift. Beispiel: \"Salesforce\"",
+ "cloudappsSelectorPluralExcluded": "{0} ausgeschlossene Apps",
+ "cloudappsSelectorPluralIncluded": "{0} enthaltene Apps",
+ "cloudappsSelectorSingularExcluded": "1 App ausgeschlossen",
+ "cloudappsSelectorSingularIncluded": "1 App enthalten",
+ "cloudappsSelectorUserPlural": "{0} Apps",
+ "cloudappsSelectorUserSingular": "1 App",
+ "conditionLabelMulti": "{0} Bedingungen ausgewählt",
+ "conditionLabelOne": "1 Bedingung ausgewählt",
+ "conditionalAccessBladeTitle": "Bedingter Zugriff",
+ "conditionsNotSelectedLabel": "Nicht konfiguriert",
+ "conditionsReqMfaReauthSet": "Einige Optionen sind aufgrund der Zuweisung „Multi-Faktor-Authentifizierung erfordern“ und des derzeit ausgewählten Sitzungssteuerelements „Anmeldehäufigkeit jedes Mal“ nicht verfügbar.",
+ "conditionsReqPwSet": "Aufgrund der derzeit ausgewählten Zuweisung \"Kennwortänderung anfordern\" sind einige Optionen nicht verfügbar.",
+ "configureCasText": "Cloud App Security konfigurieren",
+ "configureCustomControlsText": "Benutzerdefinierte Richtlinie konfigurieren",
+ "controlLabelMulti": "{0} Steuerelemente ausgewählt",
+ "controlLabelOne": "1 Steuerelement ausgewählt",
+ "controlValidatorText": "Wählen Sie mindestens ein Steuerelement aus.",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Erfahren Sie mehr über die Anforderung konformer Geräte.",
+ "controlsDeviceComplianceInfoBubble": "Das Gerät muss Intune-konform sein. Wenn das Gerät nicht kompatibel ist, wird der Benutzer aufgefordert, das Gerät unter Kompatibilität zu bringen.",
+ "controlsDomainJoinedAriaLabel": "Erfahren Sie mehr über die Anforderung von in Microsoft Entra hybrid eingebundenen Geräten.",
+ "controlsDomainJoinedInfoBubble": "Geräte müssen in Microsoft Entra hybrid eingebunden sein.",
+ "controlsMamAriaLabel": "Erfahren Sie mehr über die Anforderung genehmigter Clientanwendungen.",
+ "controlsMamInfoBubble": "Das Gerät muss diese genehmigten Clientanwendungen verwenden.",
+ "controlsMfaInfoBubble": "Benutzer müssen zusätzliche Sicherheitsanforderungen erfüllen, z. B. Telefonanruf, SMS.",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Erfahren Sie mehr über das Anfordern von richtliniengeschützten Apps.",
+ "controlsRequireCompliantAppInfoBubble": "Das Gerät muss durch Richtlinien geschützte Apps verwenden.",
+ "controlsRequirePasswordResetAriaLabel": "Erfahren Sie mehr über das Anfordern einer Kennwortänderung.",
+ "controlsRequirePasswordResetInfoBubble": "Zum Verringern des Benutzerrisikos ist eine Kennwortänderung erforderlich. Für diese Option wird außerdem die Multi-Faktor-Authentifizierung benötigt. Andere Steuerelemente können nicht verwendet werden.",
+ "countriesRadiobuttonInfoBalloonContent": "Das Land/die Region, von der aus die Anmeldung erfolgt, wird über die IP-Adresse des Benutzers bestimmt.",
+ "createNewVpnCert": "Neues Zertifikat",
+ "createdTimeLabel": "Zeitpunkt der Erstellung",
+ "customRoleLabel": "Benutzerdefinierte Rollen (nicht unterstützt)",
+ "dateRangeTypeLabel": "Datumsbereich",
+ "daysOfWeekPlaceholderText": "Wochentage filtern",
+ "daysOfWeekTypeLabel": "Wochentage",
+ "deletePolicyNoLicenseText": "Sie können diese Richtlinie jetzt löschen. Nach dem Löschen können Sie sie erst dann wiederherstellen, wenn Sie die erforderlichen Lizenzen besitzen.",
+ "descriptionContentForControlsAndOr": "Für mehrere Steuerelemente",
+ "devicePlatform": "Geräteplattform",
+ "devicePlatformConditionHelpDescription": "Hiermit wird die Richtlinie auf ausgewählte Geräteplattformen angewendet.\n[Weitere Informationen][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} eingeschlossen",
+ "devicePlatformIncludeExclude": "\"{0}\" und \"{1}\" ausgeschlossen",
+ "devicePlatformNoSelectionError": "Für die Auswahl von Geräteplattformen muss ein untergeordnetes Element ausgewählt werden.",
+ "devicePlatformsNone": "Kein",
+ "deviceSelectionBladeExcludeDescription": "Wählen Sie die Plattformen aus, die von der Richtlinie ausgenommen werden sollen.",
+ "deviceSelectionBladeIncludeDescription": "Hiermit werden die Geräteplattformen ausgewählt, auf die diese Richtlinie angewendet werden soll.",
+ "deviceStateAll": "Alle Gerätezustände",
+ "deviceStateCompliant": "Gerät als konform markiert",
+ "deviceStateCompliantInfoContent": "Mit Intune konforme Geräte werden von der Auswertung dieser Richtlinie ausgeschlossen. Wenn die Richtlinie z. B. den Zugriff blockiert, werden alle Geräte mit Ausnahme derjenigen blockiert, die mit Intune konform sind.",
+ "deviceStateConditionConfigureInfoContent": "Richtlinienkonfiguration basierend auf Gerätezustand",
+ "deviceStateConditionSelectorInfoContent": "Gibt an, ob das Gerät, von dem sich der Benutzer anmeldet, ein \"In Microsoft Entra hybrid eingebundenes Gerät\" oder \"als konform markiert\" ist.\n Dies ist veraltet. Verwenden Sie stattdessen \"{1}\".",
+ "deviceStateConditionSelectorLabel": "Gerätestatus (veraltet)",
+ "deviceStateDomainJoined": "In Microsoft Entra hybrid eingebundenes Gerät",
+ "deviceStateDomainJoinedInfoContent": "In Microsoft Entra hybrid eingebundene Geräte werden von der Auswertung dieser Richtlinie ausgeschlossen. Wenn die Richtlinie beispielsweise den Zugriff blockiert, werden alle Geräte mit Ausnahme von in Microsoft Entra hybrid eingebundenen Geräten blockiert.",
+ "deviceStateDomainJoinedInfoLinkText": "Weitere Informationen.",
+ "deviceStateExcludeDescription": "Hiermit wird der Gerätezustand zum Ausschließen von Geräten von dieser Richtlinie ausgewählt.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0}, ausschließen: {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0}, ausschließen: {1}, {2}",
+ "directoryRoleInfoContent": "Weisen Sie integrierten Verzeichnisrollen eine Richtlinie zu.",
+ "directoryRolesLabel": "Verzeichnisrollen",
+ "discardbutton": "Verwerfen",
+ "downloadDefaultFileName": "IP-Bereiche",
+ "downloadExampleFileName": "Beispiel",
+ "downloadExampleHeader": "Dies ist eine Beispieldatei zu den akzeptierten Datentypen. Zeilen, die mit # beginnen, werden ignoriert.",
+ "duplicate": "Duplizieren",
+ "duplicatePolicyName": "{0} KOPIEREN",
+ "endDatePickerLabel": "Endet",
+ "endTimePickerLabel": "Endzeit",
+ "enterCountryText": "IP-Adresse und Land/Region werden als Paar ausgewertet. Wählen Sie das Land aus.",
+ "enterIpText": "IP-Adresse und Land/Region werden zusammen ausgewertet. Geben Sie die IP-Adresse ein.",
+ "enterUserText": "Kein Benutzer ausgewählt. Wählen Sie einen Benutzer aus.",
+ "evaluationResult": "Auswertungsergebnis",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Nur Exchange ActiveSync mit unterstützten Plattformen",
+ "excludeAllTrustedLocationSelectorText": "Alle vertrauenswürdigen Standorte",
+ "featureRequiresP2": "Für dieses Feature ist eine Microsoft Entra ID P2-Lizenz erforderlich.",
+ "friday": "Freitag",
+ "grantControls": "Steuerelemente zur Rechteerteilung",
+ "gridNetworkTrusted": "Vertrauenswürdig",
+ "gridPolicyCreatedDateTime": "Erstellungsdatum",
+ "gridPolicyEnabled": "Aktiviert",
+ "gridPolicyModifiedDateTime": "Änderungsdatum",
+ "gridPolicyName": "Richtlinienname",
+ "gridPolicyState": "Zustand",
+ "groupSelectionBladeExcludeDescription": "Hiermit werden die Gruppen ausgewählt, die von der Richtlinie ausgenommen werden sollen.",
+ "groupSelectionBladeExcludedSelectorTitle": "Ausgeschlossene Gruppen auswählen",
+ "groupSelectionBladeSelect": "Gruppen auswählen",
+ "groupSelectorInfoBallonText": "Gruppen im Verzeichnis, auf das die Richtlinie angewendet wird. Beispiel: \"Pilotgruppe\"",
+ "groupsSelectionBladeTitle": "Gruppen",
+ "helpCommonScenariosText": "Möchten Sie einige gängige Szenarien kennenlernen?",
+ "helpCondition1": "Wenn sich ein beliebiger Benutzer außerhalb des Unternehmensnetzwerks befindet",
+ "helpCondition2": "Wenn sich Benutzer der Gruppe \"Manager\" anmelden",
+ "helpConditionsTitle": "Bedingungen",
+ "helpControl1": "Sie müssen sich unter Verwendung der Multi-Faktor-Authentifizierung anmelden.",
+ "helpControl2": "Sie müssen sich auf einem Intune-kompatiblen oder auf einem in die Domäne eingebundenen Gerät befinden.",
+ "helpControlsTitle": "Steuerungen",
+ "helpIntroText": "Über den bedingten Zugriff können Sie Zugriffsanforderungen erzwingen, wenn bestimmte Bedingungen erfüllt sind. Hier einige Beispiele:",
+ "helpIntroTitle": "Was ist bedingter Zugriff?",
+ "helpLearnMoreText": "Möchten Sie mehr über den bedingten Zugriff erfahren?",
+ "helpStartStep1": "Erstellen Sie Ihre erste Richtlinie, indem Sie auf \"+ Neue Richtlinie\" klicken.",
+ "helpStartStep2": "Geben Sie Richtlinienbedingungen und -steuerelemente an.",
+ "helpStartStep3": "Wenn Sie fertig sind, vergessen Sie nicht, die Richtlinie zu aktivieren und auf \"Erstellen\" zu klicken.",
+ "helpStartTitle": "Erste Schritte",
+ "highRisk": "Hoch",
+ "includeAndExcludeAppsTextFormat": "Einschließen: {0}. Ausschließen: {1}.",
+ "includeAppsTextFormat": "Einschließen: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Unbekannte Bereiche sind IP-Adressen, die keinem Land/keiner Region zugeordnet werden können.",
+ "includeUnknownAreasCheckboxLabel": "Unbekannte Bereiche einschließen",
+ "infoCommandLabel": "Info",
+ "invalidCertDuration": "Ungültige Zertifikatdauer.",
+ "invalidIpAddress": "Der Wert muss eine gültige IP-Adresse sein.",
+ "invalidReAuthSignInRiskOptionSelected": "Die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ lässt die Auswahl „Kein Risiko“ im Bedingungssteuerelement „Anmelderisiko“ nicht zu.",
+ "invalidUriErrorMsg": "Geben Sie einen gültigen URI an. Beispiel: uri:contoso.com:acr ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Alle laden",
+ "loading": "Wird geladen...",
+ "locationConfigureNamedLocationsText": "Alle vertrauenswürdigen Standorte konfigurieren",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Der Name der Richtlinie ist zu lang. Er darf maximal 256 Zeichen umfassen.",
+ "locationSelectionBladeExcludeDescription": "Wählen Sie die Standorte aus, die von der Richtlinie ausgenommen werden sollen.",
+ "locationSelectionBladeIncludeDescription": "Hiermit werden die Standorte ausgewählt, die in diese Richtlinie eingeschlossen werden sollen.",
+ "locationsAllLocationsLabel": "Alle Standorte",
+ "locationsAllNamedLocationsLabel": "Alle vertrauenswürdigen IPs",
+ "locationsAllPrivateLinksLabel": "Alle Private Link-Instanzen in meinem Mandanten",
+ "locationsIncludeExcludeLabel": "\"{0}\" und alle vertrauenswürdigen IPs ausschließen",
+ "locationsSelectedPrivateLinksLabel": "Ausgewählte Private Link-Instanzen",
+ "lowRisk": "Niedrig",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "Zum Verwalten von Richtlinien für bedingten Zugriff benötigt Ihre Organisation Microsoft Entra P1 oder P2.",
+ "manageSecurityDefaultsAriaLabel": "Einstellungen für Sicherheitsstandards verwalten",
+ "markAsTrustedCheckboxInfoBalloonContent": "Durch die Anmeldung von einem vertrauenswürdigen Standort aus wird das Benutzeranmelderisiko verringert. Markieren Sie diesen Standort nur dann als vertrauenswürdig, wenn die eingegebenen IP-Bereiche bekannt sind und in Ihrer Organisation als unbedenklich eingestuft werden.",
+ "markAsTrustedCheckboxLabel": "Als vertrauenswürdigen Standort markieren",
+ "mediumRisk": "Mittel",
+ "memberSelectionCommandRemove": "Entfernen",
+ "menuItemClaimProviderControls": "Benutzerdefinierte Steuerelemente (Vorschau)",
+ "menuItemClassicPolicies": "Klassische Richtlinien",
+ "menuItemInsightsAndReporting": "Insights und Berichterstellung",
+ "menuItemManage": "Verwalten",
+ "menuItemNamedLocationsPreview": "Benannte Standorte (Vorschau)",
+ "menuItemNamedNetworks": "Benannte Standorte",
+ "menuItemPolicies": "Richtlinien",
+ "menuItemTermsOfUse": "Nutzungsbedingungen",
+ "modifiedTimeLabel": "Zeitpunkt der Änderung",
+ "monday": "Montag",
+ "nameLabel": "Name",
+ "namedLocationCountryInfoBanner": "Nur IPv4-Adressen werden Ländern/Regionen zugeordnet. IPv6-Adressen werden bei unbekannten Ländern/Regionen einbezogen.",
+ "namedLocationTypeCountry": "Länder/Regionen",
+ "namedLocationTypeLabel": "Standort definieren über:",
+ "namedLocationUpsellBanner": "Diese Ansicht ist veraltet. Wechseln Sie zur neuen und verbesserten Ansicht \"Benannte Standorte\".",
+ "namedLocationsHelpDescription": "Benannte Standorte werden von Microsoft Entra ID-Sicherheitsberichten verwendet, um falsch positive Ergebnisse und Microsoft Entra-Richtlinien für bedingten Zugriff zu reduzieren.\n[Weitere Informationen] [1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Neuen IP-Adressbereich hinzufügen (Beispiel: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "Sie müssen mindestens ein Land/eine Region auswählen.",
+ "namedNetworkDeleteCommand": "Löschen",
+ "namedNetworkDeleteDescription": "Möchten Sie \"{0}\" löschen? Diese Aktion kann nicht rückgängig gemacht werden.",
+ "namedNetworkDeleteTitle": "Sind Sie sicher?",
+ "namedNetworkDownloadIpRange": "Herunterladen",
+ "namedNetworkInvalidRange": "Der Wert muss ein gültiger IP-Bereich sein.",
+ "namedNetworkIpRangeNeeded": "Sie benötigen mindestens einen gültigen IP-Bereich.",
+ "namedNetworkIpRangesDescriptionContent": "Hiermit werden die IP-Adressbereiche für Ihre Organisation konfiguriert.",
+ "namedNetworkIpRangesTab": "IP-Bereiche",
+ "namedNetworkListAdd": "Neuer Standort",
+ "namedNetworkListConfigureTrustedIps": "Konfigurieren von vertrauenswürdigen IP-Adressen für die Multi-Faktor-Authentifizierung",
+ "namedNetworkNameDescription": "Beispiel: \"Büro Redmond\"",
+ "namedNetworkNameInvalid": "Der angegebene Name ist ungültig.",
+ "namedNetworkNameRequired": "Sie müssen einen Namen für diesen Standort angeben.",
+ "namedNetworkNoIpRanges": "Keine IP-Bereiche",
+ "namedNetworkNotificationCreateDescription": "Der Standort namens \"{0}\" wird erstellt.",
+ "namedNetworkNotificationCreateFailedDescription": "Fehler beim Erstellen des Standorts \"{0}\". Versuchen Sie es später noch mal.",
+ "namedNetworkNotificationCreateFailedTitle": "Fehler beim Erstellen des Standorts",
+ "namedNetworkNotificationCreateSuccessDescription": "Der Standort namens \"{0}\" wurde erstellt.",
+ "namedNetworkNotificationCreateSuccessTitle": "\"{0}\" wurde erstellt",
+ "namedNetworkNotificationCreateTitle": "\"{0}\" wird erstellt",
+ "namedNetworkNotificationDeleteDescription": "Der Standort namens \"{0}\" wird gelöscht.",
+ "namedNetworkNotificationDeleteFailedDescription": "Fehler beim Löschen des Standorts \"{0}\". Versuchen Sie es später noch mal.",
+ "namedNetworkNotificationDeleteFailedTitle": "Fehler beim Löschen des Standorts",
+ "namedNetworkNotificationDeleteSuccessDescription": "Der Standort namens \"{0}\" wurde gelöscht.",
+ "namedNetworkNotificationDeleteSuccessTitle": "\"{0}\" wurde gelöscht",
+ "namedNetworkNotificationDeleteTitle": "\"{0}\" wird gelöscht.",
+ "namedNetworkNotificationUpdateDescription": "Der Standort namens \"{0}\" wird aktualisiert.",
+ "namedNetworkNotificationUpdateFailedDescription": "Fehler beim Aktualisieren des Standorts \"{0}\". Versuchen Sie es später noch mal.",
+ "namedNetworkNotificationUpdateFailedTitle": "Fehler beim Aktualisieren des Standorts",
+ "namedNetworkNotificationUpdateSuccessDescription": "Der Standort namens \"{0}\" wurde aktualisiert.",
+ "namedNetworkNotificationUpdateSuccessTitle": "\"{0}\" wurde aktualisiert",
+ "namedNetworkNotificationUpdateTitle": "\"{0}\" wird aktualisiert",
+ "namedNetworkSearchPlaceholder": "Suche nach Standorten",
+ "namedNetworkUploadFailedDescription": "Fehler beim Analysieren der angegebenen Datei. Stellen Sie sicher, dass eine Nur-Text-Datei hochgeladen wird, bei der jede Zeile das CIDR-Format aufweist.",
+ "namedNetworkUploadFailedTitle": "Fehler beim Analysieren von \"{0}\"",
+ "namedNetworkUploadInProgressDescription": "Es wird versucht, gültige CIDR-Werte aus \"{0}\" zu analysieren.",
+ "namedNetworkUploadInProgressTitle": "\"{0}\" wird analysiert",
+ "namedNetworkUploadInvalidDescription": "\"{0}\" ist entweder zu groß oder weist ein ungültiges Format auf.",
+ "namedNetworkUploadInvalidTitle": "\"{0}\" ungültig",
+ "namedNetworkUploadIpRange": "Hochladen",
+ "namedNetworkUploadSuccessDescription": "{0} Zeilen wurden analysiert. {1} weisen ein ungültiges Format auf. {2} wurden übersprungen.",
+ "namedNetworkUploadSuccessTitle": "Analyse von \"{0}\" beendet",
+ "namedNetworksAdd": "Neuer benannter Standort",
+ "namedNetworksConditionHelpDescription": "Hiermit steuern Sie den Benutzerzugriff basierend auf dem physischen Standort.\n[Weitere Informationen][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "\"{0}\" und \"{1}\" ausgeschlossen",
+ "namedNetworksHelpDescription": "Benannte Standorte werden von Microsoft Entra ID-Sicherheitsberichten verwendet, um die Anzahl von falsch positiven Ergebnissen und von Microsoft Entra-Richtlinien für bedingten Zugriff zu verringern.\n[Weitere Informationen][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} eingeschlossen",
+ "namedNetworksNone": "Keine benannten Standorte gefunden.",
+ "namedNetworksTitle": "Standorte konfigurieren",
+ "namednetworkExceedingSizeErrorBladeTitle": "Fehlerdetails",
+ "namednetworkExceedingSizeErrorDetailText": "Klicken Sie hier, um weitere Informationen zu erhalten.",
+ "namednetworkExceedingSizeErrorMessage": "Sie haben den maximal zulässigen Speicher für benannte Standorte überschritten. Versuchen Sie es mit einer kürzeren Liste. Klicken Sie hier, um weitere Details anzuzeigen.",
+ "needMfaSecondary": "„Multi-Faktor-Authentifizierung erfordern“ muss ausgewählt sein, wenn „Anmeldehäufigkeit jedes Mal“ mit „Nur sekundäre Authentifizierungsmethoden“ ausgewählt ist.",
+ "needMfaSpecificApps": "„Die „Anmeldehäufigkeit jedes Mal“ für die Sitzungssteuerung erfordert die Zuweisungssteuerung „Multi-Faktor-Authentifizierung erforderlich“, wenn speziell unterstützte Apps ausgewählt werden",
+ "newCertName": "Neues Zertifikat",
+ "noAttributePermissionsError": "Unzureichende Berechtigungen zum Erstellen oder Aktualisieren der Richtlinie. Die Rolle „Attributdefinitionsleser“ ist erforderlich, um dynamische Filter hinzuzufügen/zu bearbeiten.",
+ "noPolicyRowMessage": "Keine Richtlinien",
+ "noSPSelected": "Kein Dienstprinzipal ausgewählt",
+ "noUpdatePermissionMessage": "Sie sind nicht berechtigt, diese Einstellungen zu aktualisieren. Wenden Sie sich an den globalen Administrator, um Zugriff zu erhalten.",
+ "noUserSelected": "Kein Benutzer ausgewählt.",
+ "noneRisk": "Kein Risiko",
+ "office365Description": "Zu diesen Apps gehören Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer und andere.",
+ "office365InfoBox": "Mindestens eine der ausgewählten Apps ist Teil von Office 365. Es wird empfohlen, die Richtlinie stattdessen für die Office 365-App festzulegen.",
+ "oneUserSelected": "1 Benutzer ausgewählt",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Nur globale Administratoren können diese Richtlinie speichern.",
+ "or": "{0} ODER {1}",
+ "pickerDoneCommand": "Fertig",
+ "policiesBladeAdPremiumUpsellBannerText": "Erstellen Sie Ihre eigenen Richtlinien, und bearbeiten Sie spezifische Bedingungen wie Cloud-Apps, Anmelderisiken und Geräteplattformen mit Microsoft Entra ID Premium.",
+ "policiesBladeTitle": "Richtlinien",
+ "policiesBladeTitleWithAppName": "Richtlinien: {0}",
+ "policiesDisabledBannerText": "Das Erstellen und Bearbeiten von Richtlinien ist für Anwendungen mit einem Attribut für die Anmeldung per Link untersagt.",
+ "policiesHitMaxLimitStatusBarMessage": "Sie haben die maximale Anzahl von Richtlinien für diesen Mandanten erreicht. Löschen Sie einige Richtlinien, um weitere Richtlinien erstellen zu können.",
+ "policyAssignmentsSection": "Zuweisungen",
+ "policyBlockAllInfoBox": "Die konfigurierte Richtlinie blockiert alle Benutzer und wird daher nicht unterstützt. Überprüfen Sie die Zuweisungen und Steuerelemente. Schließen Sie den aktuellen Benutzer ({0}) aus, wenn Sie diese Richtlinie speichern möchten.",
+ "policyCloudAppsDisplayTextAllApp": "Alle Apps",
+ "policyCloudAppsLabel": "Cloud-Apps",
+ "policyConditionClientAppDescription": "Software, die der Benutzer zum Zugriff auf die Cloud-App verwendet. Beispiel: \"Browser\"",
+ "policyConditionClientAppV2Description": "Software, die der Benutzer zum Zugriff auf die Cloud-App verwendet. Beispiel: \"Browser\"",
+ "policyConditionDevicePlatform": "Geräteplattformen",
+ "policyConditionDevicePlatformDescription": "Die Plattform, von der aus sich der Benutzer anmeldet. Beispiel: \"iOS\"",
+ "policyConditionLocation": "Standorte",
+ "policyConditionLocationDescription": "Der Standort (ermittelt über den IP-Adressbereich), von dem aus sich der Benutzer anmeldet",
+ "policyConditionLocationPreview": "Standorte (Vorschau)",
+ "policyConditionSigninRisk": "Anmelderisiko",
+ "policyConditionSigninRiskDescription": "Die Wahrscheinlichkeit, dass die Anmeldung von einer anderen Person als dem Benutzer stammt. Die Risikostufe kann \"Hoch\", \"Mittel\" oder \"Niedrig\" lauten. Erfordert eine Microsoft Entra ID P2-Lizenz.",
+ "policyConditionUserRisk": "Benutzerrisiko",
+ "policyConditionUserRiskDescription": "Hiermit konfigurieren Sie die Benutzerrisikostufen, die für die Erzwingung der Richtlinie erforderlich sind.",
+ "policyConditioniClientApp": "Client-Apps",
+ "policyControlAllowAccessDisplayedName": "Zugriff gewähren",
+ "policyControlAuthenticationStrengthDisplayedName": "Authentifizierungsstärke erforderlich (Vorschau)",
+ "policyControlBladeTitle": "Gewähren",
+ "policyControlBlockAccessDisplayedName": "Blockzugriff",
+ "policyControlCompliantDeviceDisplayedName": "Markieren des Geräts als kompatibel erforderlich",
+ "policyControlContentDescription": "Steuern Sie die Zugriffserzwingung, um den Zugriff zu blockieren oder zu gewähren.",
+ "policyControlInfoBallonText": "Blockieren Sie den Zugriff, oder wählen Sie zusätzliche Anforderungen aus, die für eine Zugriffserteilung erfüllt sein müssen.",
+ "policyControlMfaChallengeDisplayedName": "Multi-Faktor-Authentifizierung erfordern",
+ "policyControlRequireCompliantAppDisplayedName": "App-Schutzrichtlinie erforderlich",
+ "policyControlRequireDomainJoinedDisplayedName": "In Microsoft Entra hybrid eingebundenes Gerät erforderlich",
+ "policyControlRequireMamDisplayedName": "Genehmigte Client-App erforderlich",
+ "policyControlRequiredPasswordChangeDisplayedName": "Kennwortänderung anfordern",
+ "policyControlSelectAuthStrength": "Authentifizierungsstärke erforderlich",
+ "policyControlsNoControlsSelected": "0 Steuerelemente ausgewählt",
+ "policyControlsSection": "Zugriffskontrollen",
+ "policyCreatBladeTitle": "Neu",
+ "policyCreateButton": "Erstellen",
+ "policyCreateFailedMessage": "Fehler: {0}",
+ "policyCreateFailedTitle": "Fehler beim Erstellen von \"{0}\"",
+ "policyCreateInProgressTitle": "\"{0}\" wird erstellt",
+ "policyCreateSuccessMessage": "\"{0}\" wurde erfolgreich erstellt. Die Richtlinie wird in wenigen Minuten aktiviert, wenn Sie \"Richtlinie aktivieren\" auf \"Ein\" festgelegt haben.",
+ "policyCreateSuccessTitle": "\"{0}\" erfolgreich erstellt",
+ "policyDeleteConfirmation": "Möchten Sie \"{0}\" löschen? Diese Aktion kann nicht rückgängig gemacht werden.",
+ "policyDeleteFailTitle": "Fehler beim Löschen von \"{0}\".",
+ "policyDeleteInProgressTitle": "\"{0}\" wird gelöscht.",
+ "policyDeleteSuccessTitle": "\"{0}\" wurde erfolgreich gelöscht.",
+ "policyEnforceLabel": "Richtlinie aktivieren",
+ "policyErrorCannotSetSigninRisk": "Sie haben keine Berechtigung zum Speichern einer Richtlinie mit einer Bedingung zum Anmelderisiko.",
+ "policyErrorNoPermission": "Sie haben keine Berechtigung zum Speichern der Richtlinie. Wenden Sie sich an Ihren globalen Administrator.",
+ "policyErrorUnknown": "Es ist ein Fehler aufgetreten. Versuchen Sie es später noch mal.",
+ "policyFallbackWarningMessage": "Fehler beim Erstellen oder Aktualisieren von \"{0}\" mithilfe von MS Graph. Es wurde ein Fallback auf AD Graph durchgeführt. Untersuchen Sie das folgende Szenario, weil höchstwahrscheinlich ein Fehler beim Aufrufen des Richtlinienendpunkts für MS Graph mit einer inkompatiblen Bedingung vorliegt.",
+ "policyFallbackWarningTitle": "\"{0}\" teilweise erfolgreich erstellt oder aktualisiert",
+ "policyNameCannotBeEmpty": "Der Richtlinienname darf nicht leer sein.",
+ "policyNameDevice": "Geräterichtlinie",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Richtlinie für die Verwaltung mobiler Apps",
+ "policyNameMfaLocation": "Multi-Faktor-Authentifizierung und Standortrichtlinie",
+ "policyNamePlaceholderText": "Beispiel: \"App-Richtlinie zur Gerätekompatibilität\"",
+ "policyNameTooLongError": "Der Name der Richtlinie ist zu lang. Der Name darf maximal 256 Zeichen umfassen.",
+ "policyOff": "Aus",
+ "policyOn": "Ein",
+ "policyReportOnly": "Nur Bericht",
+ "policyReviewSection": "Überprüfung",
+ "policySaveButton": "Speichern",
+ "policyStatusIconDescription": "Die Richtlinie ist aktiviert.",
+ "policyStatusIconEnabled": "Symbol für den Status \"Aktiviert\"",
+ "policyTemplateName1": "Von der App erzwungene Einschränkungen für den Browserzugriff durch {0} verwenden",
+ "policyTemplateName2": "Zugriff durch {0} nur auf verwalteten Geräten zulassen",
+ "policyTemplateName3": "Die Richtlinie wurde aus den Einstellungen für die fortlaufende Zugriffsevaluierung migriert.",
+ "policyTriggerRiskSpecific": "Bestimmte Risikostufe auswählen",
+ "policyTriggersInfoBalloonText": "Diese Bedingungen definieren die Anwendung der Richtlinie. Beispiel \"Standort\".",
+ "policyTriggersNoConditionsSelected": "0 Bedingungen ausgewählt",
+ "policyTriggersSelectorLabel": "Bedingungen",
+ "policyUpdateFailedMessage": "Fehler: {0}",
+ "policyUpdateFailedTitle": "Fehler beim Aktualisieren von \"{0}\".",
+ "policyUpdateInProgressTitle": "\"{0}\" wird aktualisiert.",
+ "policyUpdateSuccessMessage": "\"{0}\" wurde erfolgreich aktualisiert. Die Richtlinie wird in wenigen Minuten aktiviert, wenn Sie \"Richtlinie aktivieren\" auf \"Ein\" festgelegt haben.",
+ "policyUpdateSuccessTitle": "\"{0}\" wurde erfolgreich aktualisiert.",
+ "primaryCol": "Primär",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "Modus \"Nur Bericht\": Richtlinien werden bei der Anmeldung ausgewertet und protokolliert, beeinträchtigen die Benutzer aber nicht.",
+ "requireAllControlsText": "Alle ausgewählten Kontrollen anfordern",
+ "requireCompliantDevice": "Erfordert kompatibles Gerät",
+ "requireDomainJoined": "In Domäne eingebundenes Gerät erforderlich",
+ "requireGrantReauth": "Die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ erfordert eine Zuweisungssteuerung „Multi-Faktor-Authentifizierung erfordern“ oder „Kennwortänderung erfordern“, wenn „Alle Cloud-Apps“ ausgewählt ist.",
+ "requireMFA": "Multi-Faktor-Authentifizierung erfordern",
+ "requireMfaReauth": "Für die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ muss die Zuweisungssteuerung „Multi-Faktor-Authentifizierung erfordern“ für „Anmelderisiko“ erteilt werden.",
+ "requireOneControlText": "Eine der ausgewählten Steuerungen anfordern",
+ "requirePasswordChangeReauth": "Für die Sitzungssteuerung \"Anmeldehäufigkeit jedes Mal\" ist die Berechtigung \"Kennwortänderung erforderlich\" für \"Benutzerrisiko\" erforderlich.",
+ "requireRiskReauth": "Für die Sitzungssteuerung \"Anmeldehäufigkeit jedes Mal\" ist das Sitzungssteuerelement \"Benutzerrisiko\" oder \"Anmelderisiko\" erforderlich, wenn \"Alle Cloud-Apps\" ausgewählt ist.",
+ "requireRiskReauthRiskNotEnabled": "Das Sitzungssteuerelement \"Anmeldehäufigkeit jedes Mal\" ist nicht verfügbar, wenn \"Alle Cloud-Apps\" ausgewählt ist.",
+ "requireRiskReauthSignInOnly": "Das Sitzungssteuerelement \"Anmeldehäufigkeit jedes Mal\" erfordert das Sitzungssteuerelement \"Anmelderisiko\", wenn \"Alle Cloud-Apps\" ausgewählt ist.",
+ "requireRiskReauthUserOnly": "Das Sitzungssteuerelement \"Anmeldehäufigkeit jedes Mal\" erfordert die Sitzungssteuerung \"Benutzerrisiko\", wenn \"alle Cloud-Apps\" ausgewählt ist.",
+ "resetFilters": "Filter zurücksetzen",
+ "sPRequired": "Dienstprinzipal ist erforderlich",
+ "sPSelectorInfoBalloon": "Benutzer oder Dienstprinzipal, den Sie testen möchten",
+ "saturday": "Samstag",
+ "searchTextTooLongError": "Der Suchtext ist zu lang. Es sind maximal 256 Zeichen zulässig.",
+ "securityDefaultsPolicyName": "Sicherheitsstandards",
+ "securityDefaultsTextMessage": "Die Sicherheitsstandards müssen deaktiviert sein, um Richtlinie für bedingten Zugriff zu aktivieren.",
+ "securityDefaultsUpdateInProgressText": "Ein Sicherheitsupdate wird ausgeführt. Warten Sie einen Moment, und versuchen Sie es noch mal.",
+ "securityDefaultsWarningMessage": "Anscheinend sind Sie im Begriff, die Sicherheitskonfigurationen Ihrer Organisation zu verwalten. Das ist großartig! Sie müssen vor dem Aktivieren einer Richtlinie für bedingten Zugriff zunächst die {0}Sicherheitsstandards deaktivieren{1}.",
+ "selectDevicePlatforms": "Geräteplattformen auswählen",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Speicherorte auswählen",
+ "selectedSP": "Ausgewählter Dienstprinzipal",
+ "servicePrincipalBladeExcludedSelectorTitle": "Ausgeschlossene Dienstprinzipale auswählen",
+ "servicePrincipalBladeIncludedSelectorTitle": "Dienstprinzipale auswählen",
+ "servicePrincipalDataGridAria": "Liste der verfügbaren Dienstprinzipale",
+ "servicePrincipalDropDownLabel": "Wofür gilt diese Richtlinie?",
+ "servicePrincipalInfoBox": "Einige Bedingungen sind aufgrund der Auswahl von „{0}“ in der Richtlinienzuweisung nicht verfügbar.",
+ "servicePrincipalRadioAll": "Alle eigenen Dienstprinzipale",
+ "servicePrincipalRadioSelect": "Dienstprinzipale auswählen",
+ "servicePrincipalSelectionsAria": "Raster für ausgewählte Dienstprinzipale",
+ "servicePrincipalSelectorAria": "Liste der ausgewählten Dienstprinzipale",
+ "servicePrincipalSelectorMultiple": "{0} Dienstprinzipale ausgewählt",
+ "servicePrincipalSelectorSingle": "1 Dienstprinzipal ausgewählt",
+ "servicePrincipalSpecificExc": "Bestimmte Dienstprinzipale ausgeschlossen",
+ "servicePrincipalSpecificInc": "Bestimmte eingeschlossene Dienstprinzipale",
+ "servicePrincipals": "Dienstprinzipal",
+ "sessionControlBladeTitle": "Sitzung",
+ "sessionControlDescriptionContent": "Steuern Sie den Zugriff basierend auf Sitzungssteuerelementen, um in bestimmten Cloudanwendungen eine eingeschränkte Funktionalität zu ermöglichen.",
+ "sessionControlDisableInfo": "Dieses Steuerelement kann nur mit unterstützten Apps eingesetzt werden. Aktuell sind Office 365, Exchange Online und SharePoint Online die einzigen Cloud-Apps, die von der App erzwungene Einschränkungen unterstützen. Klicken Sie hier, um weitere Informationen zu erhalten.",
+ "sessionControlInfoBallonText": "Sitzungssteuerelemente sorgen für eingeschränkte Interaktionsmöglichkeiten innerhalb einer Cloud-App.",
+ "sessionControls": "Sitzungskontrollen",
+ "sessionControlsAppEnforcedLabel": "Von der App erzwungene Einschränkungen verwenden",
+ "sessionControlsCasLabel": "App-Steuerung für bedingten Zugriff verwenden",
+ "sessionControlsSecureSignInLabel": "Tokenbindung erforderlich",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} eingeschlossen",
+ "signinRiskReauth": "Die Bedingung „Anmelderisiko“ muss ausgewählt werden, wenn die Zuweisung „Multi-Faktor-Authentifizierung erfordern“ und die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ ausgewählt sind.",
+ "signinRiskTriggerDescriptionContent": "Stufe für Anmelderisiko auswählen",
+ "singleTenantServicePrincipalInfoBallonText": "Die Richtlinie gilt nur für Dienstprinzipale mit einem einzelnen Mandanten, die sich im Besitz Ihrer Organisation befinden. Klicken Sie hier, um weitere Informationen zu erhalten. ",
+ "specificSigninRiskLevelsOption": "Spezifische Risikostufen für die Anmeldung auswählen",
+ "specificUsersExcluded": "bestimmte Benutzer ausgeschlossen",
+ "specificUsersIncluded": "Bestimmte Benutzer eingeschlossen",
+ "specificUsersIncludedAndExcluded": "Bestimmte Benutzer ausgeschlossen und eingeschlossen",
+ "startDatePickerLabel": "Startet",
+ "startFreeTrial": "Kostenlose Testversion starten",
+ "startTimePickerLabel": "Startzeit",
+ "sunday": "Sonntag",
+ "testButton": "What If",
+ "thumbprintCol": "Fingerabdruck",
+ "thursday": "Donnerstag",
+ "timeConditionAllTimesLabel": "Beliebige Zeit",
+ "timeConditionIntroText": "Hiermit werden die Zeiten für die Anwendung dieser Richtlinie ausgewählt.",
+ "timeConditionSelectorInfoBallonContent": "Zeitraum, in dem sich der Benutzer anmeldet. Beispiel: \"Mittwoch, 9:00–17:00 Uhr PST\".",
+ "timeConditionSelectorLabel": "Zeit (Vorschau)",
+ "timeConditionSpecificLabel": "Bestimmte Zeiten",
+ "timeSelectorAllTimesText": "Beliebige Zeit",
+ "timeSelectorSpecificTimesText": "Bestimmte Zeiten konfiguriert",
+ "timeZoneDropdownInfoBalloonContent": "Wählen Sie eine Zeitzone aus, die den Zeitbereich definiert. Diese Richtlinie gilt für Benutzer in allen Zeitzonen. Beispiel: Der Zeitraum \"Mittwoch, 9:00–17:00 Uhr\", der für einen Benutzer in einer bestimmten Zeitzone gilt, entspricht für einen anderen Benutzer in einer anderen Zeitzone dem Zeitraum \"Mittwoch, 10:00–18:00 Uhr\".",
+ "timeZoneDropdownLabel": "Zeitzone",
+ "timeZoneDropdownPlaceholderText": "Zeitzone auswählen",
+ "tooManyPoliciesDescription": "Es werden nur die ersten 50 Richtlinien angezeigt. Klicken Sie hier, um alle Richtlinien anzuzeigen.",
+ "tooManyPoliciesTitle": "Mehr als 50 Richtlinien gefunden",
+ "trustedLocationStatusIconDescription": "Standort ist vertrauenswürdig",
+ "trustedLocationStatusIconEnabled": "Symbol für vertrauenswürdigen Status",
+ "tuesday": "Dienstag",
+ "uploadInBadState": "Die angegebene Datei kann nicht hochgeladen werden.",
+ "upsellAppsDescription": "Erfordert in allen Fällen oder nur von außerhalb des Unternehmensnetzwerks eine Multi-Faktor-Authentifizierung für sensible Anwendungen.",
+ "upsellAppsTitle": "Sichere Anwendungen",
+ "upsellBannerText": "Holen Sie sich die kostenlose Premium-Testversion, um dieses Feature zu verwenden.",
+ "upsellDataDescription": "Für den Zugriff auf Unternehmensressourcen ist die Markierung des Geräts als „konform“ oder „in Microsoft Entra hybrid eingebundenes Gerät“ erforderlich.",
+ "upsellDataTitle": "Sichere Daten",
+ "upsellDescription": "Der bedingte Zugriff bietet genau den Grad an Kontrolle und Schutz, den Sie zur Absicherung Ihrer Unternehmensdaten benötigen. Gleichzeitig wird gewährleistet, dass Ihre Benutzer bestmöglich von einem beliebigen Gerät aus ihre Arbeit erledigen können. Beispielsweise können Sie den Zugriff von außerhalb des Unternehmensnetzwerks einschränken oder den Zugriff auf Geräte beschränken, die den Kompatibilitätsrichtlinien entsprechen.",
+ "upsellRiskDescription": "Erfordert eine Multi-Faktor-Authentifizierung für Risikoereignisse, die vom Microsoft Machine Learning-System erkannt werden.",
+ "upsellRiskTitle": "Risikoschutz",
+ "upsellTitle": "Bedingter Zugriff",
+ "upsellWhyTitle": "Was spricht für die Verwendung des bedingten Zugriffs?",
+ "userAppNoneOption": "Kein",
+ "userNamePlaceholderText": "Benutzernamen eingeben",
+ "userNotSetSeletorLabel": "0 Benutzer und Gruppen ausgewählt",
+ "userOnlySelectionBladeExcludeDescription": "Wählen Sie die Benutzer aus, die von der Richtlinie ausgenommen werden sollen.",
+ "userOrGroupSelectionCountDiffBannerText": "{0}, die in dieser Richtlinie konfiguriert sind, wurden aus dem Verzeichnis gelöscht. Dies wirkt sich jedoch nicht auf die weiteren Benutzer und Gruppen in der Richtlinie aus. Beim nächsten Aktualisieren der Richtlinie werden die gelöschten Benutzer und/oder Gruppen automatisch entfernt.",
+ "userOrSPNotSetSelectorLabel": "0 Benutzer- oder Workloadidentitäten ausgewählt",
+ "userOrSPSelectionBladeTitle": "Benutzer- oder Workloadidentitäten",
+ "userOrSPSelectorInfoBallonText": "Identitäten im Verzeichnis, für das die Richtlinie gilt, einschließlich Benutzer, Gruppen und Dienstprinzipale",
+ "userRequired": "Benutzer erforderlich",
+ "userRiskErrorBox": "Die Bedingung \"Benutzerrisiko\" muss ausgewählt werden, wenn die Zuweisung \"Kennwortänderung anfordern\" ausgewählt ist.",
+ "userRiskReauth": "Die Bedingung \"Benutzerrisiko\" und nicht \"Anmelderisiko\" muss ausgewählt werden, wenn die Zuweisung \"Kennwortänderung erforderlich\" und die Sitzungssteuerung \"Anmeldehäufigkeit jedes Mal anfordern\" ausgewählt sind.",
+ "userSPRequired": "Benutzer oder Dienstprinzipal ist erforderlich",
+ "userSPSelectorTitle": "Benutzer- oder Workloadidentität",
+ "userSelectionBladeAllUsersAndGroups": "Alle Benutzer und Gruppen",
+ "userSelectionBladeExcludeDescription": "Wählen Sie die Benutzer und Gruppen aus, die von der Richtlinie ausgenommen werden sollen.",
+ "userSelectionBladeExcludeTabTitle": "Ausschließen",
+ "userSelectionBladeExcludedSelectorTitle": "Ausgeschlossene Benutzer und Gruppen auswählen",
+ "userSelectionBladeIncludeDescription": "Hiermit werden die Benutzer ausgewählt, auf die diese Richtlinie angewendet wird.",
+ "userSelectionBladeIncludeTabTitle": "Einschließen",
+ "userSelectionBladeIncludedSelectorTitle": "Auswählen",
+ "userSelectionBladeSelectUsers": "Benutzer auswählen",
+ "userSelectionBladeSelectedUsers": "Benutzer und Gruppen auswählen",
+ "userSelectionBladeTitle": "Benutzer und Gruppen",
+ "userSelectorBladeTitle": "Benutzer",
+ "userSelectorExcluded": "{0} ausgeschlossen",
+ "userSelectorGroupPlural": "{0} Gruppen",
+ "userSelectorGroupSingular": "1 Gruppe",
+ "userSelectorIncluded": "{0} eingeschlossen",
+ "userSelectorInfoBallonText": "Benutzer und Gruppen im Verzeichnis, auf die die Richtlinie angewendet wird. Beispiel: \"Pilotgruppe\"",
+ "userSelectorSelected": "{0} ausgewählt",
+ "userSelectorTitle": "Benutzer",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} Benutzer",
+ "userSelectorUserSingular": "1 Benutzer",
+ "userSelectorWithExclusion": "{0} und {1}",
+ "usersGroupsLabel": "Benutzer und Gruppen",
+ "viewApprovedAppsText": "Liste der genehmigten Client-Apps anzeigen",
+ "viewCompliantAppsText": "Liste der durch Richtlinien geschützten Client-Apps anzeigen",
+ "viewPolicyInformation": "Richtlinieninformationen anzeigen",
+ "vpnBladeTitle": "VPN-Konnektivität",
+ "vpnCertCreateFailedMessage": "Fehler: {0}",
+ "vpnCertCreateFailedTitle": "Fehler beim Erstellen von {0}.",
+ "vpnCertCreateInProgressTitle": "{0} wird erstellt.",
+ "vpnCertCreateSuccessMessage": "\"{0}\" wurde erfolgreich erstellt.",
+ "vpnCertCreateSuccessTitle": "\"{0}\" wurde erfolgreich erstellt.",
+ "vpnCertNoRowsMessage": "Keine VPN-Zertifikate gefunden.",
+ "vpnCertUpdateFailedMessage": "Fehler: {0}",
+ "vpnCertUpdateFailedTitle": "Fehler beim Aktualisieren von \"{0}\".",
+ "vpnCertUpdateInProgressTitle": "\"{0}\" wird aktualisiert.",
+ "vpnCertUpdateSuccessMessage": "\"{0}\" wurde erfolgreich aktualisiert.",
+ "vpnCertUpdateSuccessTitle": "\"{0}\" wurde erfolgreich aktualisiert.",
+ "vpnFeatureInfo": "Klicken Sie hier, um weitere Informationen zur VPN-Konnektivität und zum bedingten Zugriff zu erhalten.",
+ "vpnFeatureWarning": "Sobald ein VPN-Zertifikat im Portal erstellt wird, wird es von Microsoft Entra ID sofort zum Ausstellen kurzlebiger Zertifikate für den VPN-Client verwendet. Das VPN-Zertifikat muss unbedingt sofort auf dem VPN-Server bereitgestellt werden, um Probleme bei der Validierung von Anmeldeinformationen des VPN-Clients zu vermeiden.",
+ "vpnMenuText": "VPN-Konnektivität",
+ "vpncertDropdownDefaultOption": "Dauer",
+ "vpncertDropdownInfoBalloonContent": "Wählen Sie die Dauer für das zu erstellende Zertifikat aus.",
+ "vpncertDropdownLabel": "Dauer auswählen",
+ "vpncertDropdownOneyearOption": "1 Jahr",
+ "vpncertDropdownThreeyearOption": "3 Jahre",
+ "vpncertDropdownTwoyearOption": "2 Jahre",
+ "wednesday": "Mittwoch",
+ "whatIfCountry": "Land/Region",
+ "whatIfCountryInfo": "Das Land/die Region, von dem/der aus der Benutzer sich anmeldet.",
+ "whatIfDevicePlatformInfo": "Die Geräteplattform, von der aus der Benutzer sich anmeldet.",
+ "whatIfEnterIpAddress": "IP-Adresse eingeben (Beispiel: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "Es wurde eine ungültige IP-Adresse angegeben.",
+ "whatIfIpAddress": "IP-Adresse",
+ "whatIfIpAddressInfo": "Die IP-Adresse, von der aus der Benutzer sich anmeldet.",
+ "whatIfIpCountryInfoBoxText": "Wenn Sie eine IP-Adresse oder ein Land/eine Region verwenden, sind beide Felder erforderlich und müssen ordnungsgemäß zugeordnet werden.",
+ "whatIfSelectCountry": "Land/Region auswählen...",
+ "whatIfSelectDevicePlatform": "Geräteplattform auswählen...",
+ "whatIfSelectPrivateLink": "Private Link auswählen...",
+ "whatIfSelectSignInRisk": "Anmelderisiko auswählen...",
+ "whatIfSignInRisk": "Anmelderisiko",
+ "whatIfSignInRiskInfo": "Die der Anmeldung zugeordnete Risikostufe",
+ "whatIfUnknownAreas": "Unbekannte Bereiche",
+ "windows365InfoBox": "Die Auswahl von Windows 365 wirkt sich auf Verbindungen mit Cloud-PCs und Azure Virtual Desktop-Sitzungshosts aus. Klicken Sie hier, um weitere Informationen zu erhalten.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Workloadidentitäten (Vorschau)",
+ "workloadIdentitiesLicenseText": "Wenn Sie diese Richtlinie bearbeiten möchten, benötigen Sie eine Premium-P1- oder P2-Lizenz für Workloadidentitäten.",
+ "workloadIdentity": "Workload-Identität"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Übersicht"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Suchen Sie nach Gerät, Benutzer oder Qualitätsupdateversion."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Fehler beim Laden von iOS-Softwareupdateprofilen"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Profil für iOS-Updates",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "Profil"
+ },
+ "listLoadError": "iOS-Softwareupdateprofile können nicht geladen werden, versuchen Sie es später noch mal.",
+ "lowercase": "Richtlinie für iOS-Updates",
+ "uppercase": "Richtlinie für iOS-Updates"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Leider können wir keine Verbindung mit Apple herstellen, um die Liste verfügbarer Versionen abzurufen. Versuchen Sie es später noch mal, oder fahren Sie mit der aktuellen Version fort.",
+ "latestUpdate": "Aktuelles Update",
+ "noLongerSupported": "Die ausgewählte Version wird nicht mehr unterstützt.",
+ "olderVersionSelected": "Da Sie eine frühere Version ausgewählt haben, müssen Sie sicherstellen, dass eine Richtlinie für Geräteeinschränkungen angewendet wird, welche die Sichtbarkeit von Softwareupdates verzögert, sodass Geräte nicht auf die neueste Version aktualisiert werden können.",
+ "prefix": "iOS/iPadOS installieren",
+ "selectSupported": "Von Apple unterstützte Updateversion auswählen",
+ "updateToInstall": "Update für Installation"
+ },
+ "Schedule": {
+ "always": "Beim nächsten Einchecken aktualisieren",
+ "duringTimeWindows": "Update innerhalb des geplanten Zeitraums",
+ "header": "Wenn einem Gerät eine Updaterichtlinie zugewiesen wird, werden die neuesten Updates von Intune standardmäßig beim Einchecken des Geräts bereitgestellt. Sie können stattdessen auch einen wöchentlichen Zeitplan mit benutzerdefinierten Start- und Endzeiten erstellen. Wenn Sie eine Aktualisierung außerhalb des geplanten Zeitraums durchführen möchten, stellt Intune bis zum Ende des geplanten Zeitraums keine Updates bereit.",
+ "infoBalloon": "Zeitpunkt der Durchführung von Updates. Zum Planen von Updates während oder außerhalb der geplanten Zeiten ist eine zusätzliche Eingabe erforderlich.",
+ "label": "Zeitplantyp",
+ "outsideActiveHours": "Außerhalb der aktiven Stunden aktualisieren (Legacy)",
+ "outsideTimeWindows": "Update außerhalb des geplanten Zeitraums",
+ "timeWindow": "Zeitfenster",
+ "timeZone": "Zeitzone",
+ "title": "Einstellungen für Updaterichtlinienzeitplan:",
+ "weekly": "Wöchentlicher Zeitplan",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "Die Version von iOS/iPadOS, die zum Zeitpunkt des Updates auf Geräten installiert werden soll.",
+ "label": "Zu installierende Version auswählen"
+ },
+ "header": "Erstellen Sie ein Profil, um für die zugewiesenen Geräte eine automatische Installation der neuesten iOS-/iPadOS-Updates zu erzwingen. Diese Einstellungen bestimmen, wie und wann Softwareupdates bereitgestellt werden. Dieses Profil verhindert nicht, dass Benutzer das Betriebssystem manuell aktualisieren. Dies kann für bis zu 90 Tage mithilfe einer Einschränkungsrichtlinie für die Gerätekonfiguration verhindert werden. Updates werden nur auf überwachte Geräte angewendet.",
+ "notAvailable": "–"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Es sind keine iOS-Updaterichtlinien zur Anzeige vorhanden.",
+ "macOsUpdates": "Es sind keine Richtlinien für macOS-Softwareupdates zur Anzeige vorhanden.",
+ "windowsUpdates": "Es sind keine Updateringe für Windows 10 und höher vorhanden, die angezeigt werden sollen."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Gerätename",
+ "deviceUpdateStatus": "Status der Geräteupdates",
+ "lastUpdated": "Letzte Aktualisierung",
+ "osVersion": "Betriebssystemversion",
+ "userPrincipalName": "Benutzername"
+ },
+ "maximumOSVersionFilter": "Maximale Version des Betriebssystems",
+ "minimumOSVersionFilter": "Mindestversion des Betriebssystems",
+ "noData": "Keine anzuzeigenden Daten.",
+ "searchBoxPlaceholder": "Nach Gerätename, Benutzername oder Betriebssystemversion suchen",
+ "title": "Kontozusammenfassung für macOS-Geräte"
+ },
+ "Category": {
+ "configurationDataFile": "Konfigurationsdatendatei",
+ "critical": "Kritisch",
+ "firmware": "Firmware",
+ "other": "Andere"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Letzte Aktualisierung",
+ "successfulUpdateCount": "Erfolgreich bereitgestellte Updates",
+ "totalUpdateCount": "Gesamtanzahl bereitgestellter Updates",
+ "updateCategory": "Updatekategorie",
+ "updateCategoryStatus": "Status der Updatekategorie"
+ },
+ "noData": "Keine anzuzeigenden Daten."
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Fehler beim Laden von macOS-Softwareupdateprofilen"
+ }
+ },
+ "State": {
+ "available": "Verfügbar",
+ "commandFailed": "Fehler bei Befehl.",
+ "downloadFailed": "Fehler beim Herunterladen",
+ "downloadInsufficientNetwork": "Download: unzureichende Netzwerkressourcen",
+ "downloadInsufficientPower": "Download: unzureichende Akkukapazität",
+ "downloadInsufficientSpace": "Download: unzureichender Speicherplatz",
+ "downloaded": "Heruntergeladen",
+ "downloading": "Wird heruntergeladen",
+ "idle": "Im Leerlauf",
+ "installFailed": "Installationsfehler",
+ "installInsufficientPower": "Installation: unzureichende Akkukapazität",
+ "installInsufficientSpace": "Installation: unzureichender Speicherplatz",
+ "installing": "Wird installiert.",
+ "scheduled": "Geplant",
+ "success": "Erfolgreich",
+ "unknown": "Unbekannt"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Letzte Aktualisierung",
+ "updateName": "Updatename",
+ "updateStatus": "Updatestatus",
+ "version": "Version"
+ },
+ "noData": "Keine anzuzeigenden Daten.",
+ "searchBoxPlaceholder": "Nach Updatename oder -version suchen"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS-Updateprofil",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profil"
+ },
+ "error": "Fehler",
+ "errorOrErrors": "Fehler",
+ "errors": "Fehler",
+ "listLoadError": "Die macOS-Softwareupdateprofile können nicht geladen werden, versuchen Sie es später noch mal.",
+ "lowercase": "macOS-Updaterichtlinie",
+ "other": "Andere",
+ "subtitle": "macOS-Softwareupdate",
+ "upToDate": "Aktuell",
+ "uppercase": "macOS-Updaterichtlinie"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Versuchen Sie es später noch mal.",
+ "title": "Fehler beim Löschen von {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Versuchen Sie es später noch mal."
+ },
+ "LoadConfigurationFailed": {
+ "description": "Versuchen Sie es später noch mal.",
+ "title": "Fehler beim Laden von {0}."
+ },
+ "idWrongFormat": "Die angegebene ID für das Profil weist nicht das erwartete Format auf."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "Es muss mindestens ein Zeitfenster ausgewählt werden.",
+ "tooMany": "Es können maximal 20 Zeitfenster konfiguriert werden."
+ }
+ },
+ "endDay": "Endtag",
+ "endTime": "Beendigungszeit",
+ "startDay": "Starttag",
+ "startTime": "Startzeit",
+ "timeWindowError": "Wählen Sie ein Zeitfenster von mindestens einer Stunde aus."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Fehler beim Laden der Updateringprofile für Windows 10 und höher."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Updatering für Windows 10 und höher",
+ "title": "Windows Update for Business"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 und höher",
+ "title": "Updatering für Windows 10 und höher"
+ },
+ "listLoadError": "Updateringprofile für Windows 10 und höher können nicht geladen werden. Versuchen Sie es später noch mal.",
+ "lowercase": "Updatering",
+ "uppercase": "Updatering"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Richtlinieneinstellungen aktualisieren",
+ "updateRingSettings": "Einstellungen für Updatering"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "{0} erstellen",
+ "edit": "{0} bearbeiten"
+ }
+ },
+ "notScannedYet": "Noch nicht überprüft",
+ "outOfDateIosDevices": "Veraltete iOS-Geräte"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge, Version 77 und höher",
+ "storeApp": "Store-App",
+ "office365Suite": "Microsoft 365-Apps",
+ "microsoftDefenderATP": "Microsoft Defender für Endpunkt",
+ "other": "Sonstige",
+ "webApplication": "Webanwendung"
+ },
+ "Filters": {
+ "ruleSyntax": "Regelsyntax",
+ "filters": "Filter"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Wählen Sie ein Ermittlungsskript aus.",
+ "scriptFileLabel": "Ermittlungsskript auswählen"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Wenn diese Option aktiviert ist, müssen Geräte gemäß benutzerdefinierten Regeln konform sein, die in einer JSON-Datei basierend auf benutzerdefinierten Daten definiert sind, die von einem PowerShell-Ermittlungsskript zurückgegeben wurden.",
+ "label": "Die benutzerdefinierte Compliance wird derzeit als Vorschauversion angeboten. Wenn dies allgemein verfügbar wird, können Sie es gegen zusätzliche Kosten zu den Lizenzierungsoptionen hinzufügen, die Microsoft Intune enthalten."
+ },
+ "ScriptPicker": {
+ "objectName": "Skript",
+ "placeholder": "Klicken Sie zur Auswahl hier.",
+ "searchboxPlaceholder": "Nach Skriptname suchen",
+ "title": "Ermittlungsskript auswählen"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Zusammenfassung der Regeln für die benutzerdefinierte Konformität"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "JSON-Datei mit Ihren Einstellungen für die benutzerdefinierte Konformität hochladen und überprüfen",
+ "noFileSelectedError": "Wählen Sie eine JSON-Datei aus.",
+ "parseFileSelectedError": "Die JSON-Datei ist ungültig."
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Konfigurieren Sie die PIN- und Anmeldeinformationsanforderungen, die Benutzer erfüllen müssen, um in einem Arbeitskontext auf Apps zuzugreifen."
+ },
+ "DataProtection": {
+ "infoText": "Diese Gruppe enthält die Steuerelemente zur Verhinderung von Datenverlust (Data Loss Prevention, DLP), z. B. Einschränkungen für ausschneiden, kopieren, einfügen und speichern als. Diese Einstellungen bestimmen, wie Benutzer mit Daten in den Apps interagieren."
+ },
+ "DeviceTypes": {
+ "selectOne": "Wählen Sie mindestens einen Gerätetyp aus."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Für Apps auf allen Gerätetypen festlegen"
+ },
+ "infoText": "Wählen Sie aus, wie diese Richtlinie auf Apps auf unterschiedlichen Geräten angewendet werden soll. Fügen Sie dann mindestens eine App hinzu.",
+ "selectOne": "Wählen Sie mindestens eine App aus, um eine Richtlinie zu erstellen."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender für Endpunkt",
+ "androidDeviceOwnerApplications": "Anwendungen",
+ "androidDeviceOwnerPolicyMessages": "Benutzerdefinierte Supportinformationen",
+ "androidForWorkPassword": "Gerätekennwort",
+ "appManagement": "Apps zulassen oder blockieren",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Eingeschränkte Apps",
+ "applicationVisibility": "Apps anzeigen oder ausblenden",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, Dokumentanzeige, Spiele",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Apps und Oberfläche",
+ "associatedDomains": "Zugehörige Domänen",
+ "autonomousSingleAppMode": "Autonomer Einzelanwendungsmodus",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Windows-Verschlüsselung",
+ "bootOptions": "Startoptionen",
+ "browser": "Browser",
+ "builtinApps": "Integrierte Apps",
+ "cameras": "Kameras",
+ "cellular": "Mobilfunk",
+ "cloudAndStorage": "Cloud und Speicher",
+ "cloudPrint": "Clouddrucker",
+ "complianceEmailProfile": "E-Mail",
+ "connectedDevices": "Verbundene Geräte",
+ "connectivity": "Mobilfunk und Konnektivität",
+ "contentCaching": "Content Caching",
+ "controlPanelAndSettings": "Systemsteuerung und Einstellungen",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Benutzerdefinierte Konformität",
+ "customConfiguration": "Benutzerdefiniertes Konfigurationsprofil",
+ "customOMASettings": "Benutzerdefinierte OMA-URI-Einstellungen",
+ "customPreferences": "Einstellungsdatei",
+ "dFCISecuritySettings": "Sicherheitseinstellungen",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows-Firewall",
+ "defenderLocalSecurityOptions": "Sicherheitsoptionen für lokales Gerät",
+ "defenderSecurityCenter": "Microsoft Defender Security Center",
+ "deliveryOptimization": "Übermittlungsoptimierung",
+ "derivedCredentialAuthenticationConfiguration": "Abgeleitete Anmeldeinformation",
+ "deviceExperience": "Geräteoberfläche",
+ "deviceFirmwareConfigurationInterface": "Schnittstelle zur Konfiguration der Gerätefirmware",
+ "deviceGuard": "Microsoft Defender-Anwendungssteuerung",
+ "deviceHealth": "Geräteintegritätsdienst",
+ "devicePassword": "Gerätekennwort",
+ "deviceProperties": "Geräteeigenschaften",
+ "deviceRestrictions": "Allgemein",
+ "deviceSecurity": "Systemsicherheit",
+ "display": "Anzeigen",
+ "domainJoin": "Domänenbeitritt",
+ "domains": "Domänen",
+ "edgeBrowser": "Microsoft Edge-Legacybrowser (Version 45 und früher)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge-Kioskmodus",
+ "editionUpgrade": "Editionsupgrade",
+ "education": "Bildung",
+ "educationDeviceCerts": "Gerätezertifikate",
+ "educationStudentCerts": "Zertifikate für Schüler und Studenten",
+ "educationTakeATest": "Prüfung",
+ "educationTeacherCerts": "Lehrerzertifikate",
+ "emailProfile": "E-Mail",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "App-Erweiterung für einmaliges Anmelden",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Spiele",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Integritätsüberwachung",
+ "homeScreenLayout": "Layout der Startseite",
+ "iOSWallpaper": "Hintergrundbild",
+ "importedPFX": "Importiertes PKCS-Zertifikat",
+ "iosDefenderAtp": "Microsoft Defender für Endpunkt",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Kernelerweiterungen",
+ "keyboardAndDictionary": "Tastatur und Wörterbuch",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Dedizierte Geräte",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Kioskwebbrowser",
+ "lockScreenMessage": "Nachricht auf Sperrbildschirm",
+ "lockedScreenExperience": "Gesperrter Bildschirm",
+ "logging": "Berichterstellung und Telemetrie",
+ "loginItems": "Anmeldeelemente",
+ "loginWindow": "Anmeldefenster",
+ "macDefenderAtp": "Microsoft Defender für Endpunkt",
+ "maintenance": "Wartung",
+ "malware": "Schadsoftware",
+ "messaging": "Messaging",
+ "microphonesAndSpeakers": "Mikrofone und Lautsprecher",
+ "networkBoundary": "Netzwerkgrenze",
+ "networkProxy": "Netzwerkproxy",
+ "notifications": "App-Benachrichtigungen",
+ "pKCS": "PKCS-Zertifikat",
+ "password": "Kennwort",
+ "personalProfile": "Persönliches Profil",
+ "personalization": "Personalisierung",
+ "policyOverride": "Gruppenrichtlinie außer Kraft setzen",
+ "ports": "Ports",
+ "powerSettings": "Energieeinstellungen",
+ "printer": "Drucker",
+ "privacy": "Datenschutz",
+ "privacyPerApp": "App-spezifische Datenschutzausnahmen",
+ "privacyPreferences": "Datenschutzeinstellungen",
+ "projection": "Projektion",
+ "radios": "Radios",
+ "sCCMCompliance": "Configuration Manager-Konformität",
+ "sCEP": "SCEP-Zertifikat",
+ "sCEPProperties": "SCEP-Zertifikat",
+ "sMode": "Moduswechsel (nur Windows-Insider)",
+ "safari": "Safari",
+ "search": "Suchen",
+ "session": "Sitzung",
+ "sharedDevice": "Shared iPad",
+ "sharedPCAccountManager": "Freigegebenes, von mehreren Benutzern verwendetes Gerät",
+ "singleSignOn": "Einmaliges Anmelden",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Einstellungen",
+ "start": "Starten",
+ "systemExtensions": "Systemerweiterungen",
+ "systemSecurity": "Systemsicherheit",
+ "trustedCert": "Vertrauenswürdiges Zertifikat",
+ "uEFIAccess": "UEFI-Zugriff",
+ "updates": "Updates",
+ "userRights": "Benutzerrechte",
+ "usersAndAccounts": "Benutzer und Konten",
+ "vPN": "Basis-VPN",
+ "vPNApps": "Automatisches VPN",
+ "vPNAppsAndTrafficRules": "Regeln zu Apps und Datenverkehr",
+ "vPNConditionalAccess": "Bedingter Zugriff",
+ "vPNConnectivity": "Konnektivität",
+ "vPNDNSTriggers": "DNS-Einstellungen",
+ "vPNIKEv2": "IKEv2-Einstellungen",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Getrenntes Tunneln",
+ "vPNTrustedNetwork": "Erkennung vertrauenswürdiger Netzwerke",
+ "wakeSettings": "Aktivierungseinstellungen",
+ "webContentFilter": "Webinhaltsfilter",
+ "wiFi": "WLAN",
+ "win10Wifi": "WLAN",
+ "windowsAtp": "Microsoft Defender für Endpunkt",
+ "windowsDefenderATP": "Microsoft Defender für Endpunkt",
+ "windowsHelloForBusiness": "Windows Hello for Business",
+ "windowsSpotlight": "Windows-Blickpunkt",
+ "wiredNetwork": "Kabelgebundenes Netzwerk",
+ "wireless": "Drahtlosnetzwerke",
+ "wirelessProjection": "Drahtlose Projektion",
+ "workProfile": "Arbeitsprofileinstellungen",
+ "workProfilePassword": "Arbeitsprofilkennwort",
+ "xboxServices": "Xbox-Dienste",
+ "zebraMx": "MX-Profil (nur Zebra)",
+ "complianceActionsLabel": "Aktionen bei Inkompatibilität"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Zulässige URLs",
+ "tooltip": "Geben Sie die Websites an, auf die Ihre Benutzer im Arbeitskontext zugreifen dürfen. Andere Websites sind nicht zulässig. Sie können entweder eine Liste der zulässigen oder der blockierten Websites konfigurieren, aber nicht beides."
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Anwendungsproxy",
+ "title": "Anwendungsproxyumleitung",
+ "tooltip": "Hiermit aktivieren Sie die App-Proxyumleitung, um Benutzern den Zugriff auf Unternehmenslinks und lokale Web-Apps zu erteilen."
+ },
+ "BlockedURLs": {
+ "title": "Blockierte URLs",
+ "tooltip": "Geben Sie die Websites an, die für Ihre Benutzer im Arbeitskontext blockiert sind. Alle anderen Websites sind zulässig. Sie können entweder eine Liste der zulässigen oder der blockierten Websites konfigurieren, aber nicht beides."
+ },
+ "Bookmarks": {
+ "header": "Verwaltete Lesezeichen",
+ "tooltip": "Geben Sie eine Liste der mit Lesezeichen versehenen URLs ein, die Ihren Benutzern bei der Verwendung von Microsoft Edge in ihrem Arbeitskontext zur Verfügung stehen.",
+ "uRL": "URL"
+ },
+ "HomepageURL": {
+ "header": "Verwaltete Homepage",
+ "title": "URL-Verknüpfung zur Startseite",
+ "tooltip": "Konfigurieren Sie eine URL-Verknüpfung zur Startseite, die Benutzern als erstes Symbol unterhalb der Suchleiste angezeigt wird, wenn sie in Microsoft Edge eine neue Registerkarte öffnen."
+ },
+ "PersonalContext": {
+ "label": "Eingeschränkte Sites an persönlichen Kontext umleiten",
+ "tooltip": "Konfigurieren Sie, ob Benutzer zu ihrem persönlichen Kontext wechseln dürfen, um eingeschränkte Websites zu öffnen."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home-SKU",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Wählen Sie die Anzahl von Bits aus, die im Schlüssel enthalten sein sollen.",
- "keyUsage": "Geben Sie die kryptografische Aktion an, die zum Austauschen des öffentlichen Schlüssels des Zertifikats erforderlich ist.",
- "renewalThreshold": "Geben Sie den Prozentsatz (zwischen 1 und 99 Prozent) der verbleibenden Gültigkeitsdauer des Zertifikats an, die zulässig ist, bevor ein Gerät die Verlängerung des Zertifikats anfordern kann. Der empfohlene Wert in Intune beträgt 20 %. (1–99)",
- "rootCert": "Wählen Sie ein zuvor konfiguriertes und zugeordnetes Profil für das Stammzertifizierungsstellen-Zertifikat aus. Das Zertifizierungsstellenzertifikat muss mit dem Stammzertifikat der Zertifizierungsstelle übereinstimmen, die das Zertifikat für dieses Profil (das Sie gerade konfigurieren) ausstellt.",
- "scepServerUrl": "Geben Sie eine URL für den NDES-Server ein, der Zertifikate über SCEP ausgibt (HTTPS erforderlich). Beispiel: https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Fügen Sie mindestens eine URL für den NDES-Server hinzu, der Zertifikate über SCEP ausstellt (HTTPS erforderlich). Beispiel: https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Alternativer Antragstellername",
- "subjectNameFormat": "Format des Antragstellernamens",
- "validityPeriod": "Die verbleibende Zeit vor Ablauf des Zertifikats. Geben Sie einen Wert ein, der gleich oder kleiner ist als der Gültigkeitszeitraum, der in der Zertifikatvorlage angezeigt wird. Standardmäßig ist ein Jahr festgelegt."
- },
- "appInstallContext": "Hiermit wird der Installationskontext für diese App angegeben. Wählen Sie für Apps im dualen Modus den gewünschten Kontext für die App aus. Für alle weiteren Apps wird diese Einstellung basierend auf dem Paket vorausgewählt und kann nicht geändert werden.",
- "autoUpdateMode": "Konfigurieren Sie die Updatepriorität für die App. Wählen Sie \"Standard\" aus, um die Verbindung des Geräts mit WLAN zu verlangen, eine Belastung auszuführen und vor dem Aktualisieren der App nicht aktiv verwendet zu werden. Wählen Sie \"Hohe Priorität\" aus, um die App zu aktualisieren, sobald der Entwickler die App veröffentlicht hat, unabhängig vom Gebührenstatus, der WLAN-Funktion oder der Endbenutzeraktivität auf dem Gerät. Wählen Sie \"Zurückgestellt\" aus, um app-Updates für bis zu 90 Tage zu verhandeln. \"Hohe Priorität\" und \"Zurückgestellt\" werden nur auf Do-Geräten wirksam.",
- "configurationSettingsFormat": "Text für das Konfigurationseinstellungsformat",
- "ignoreVersionDetection": "Für Apps, die vom App-Entwickler automatisch aktualisiert werden (z. B. Google Chrome), legen Sie diese Option auf \"Ja\" fest.",
- "ignoreVersionDetectionMacOSLobApp": "Wählen Sie \"Ja\" aus, wenn die Apps automatisch durch den App-Entwickler aktualisiert werden, oder wenn vor der Installation nur auf die App-Bundle-ID überprüft werden soll. Wählen Sie \"Nein\" aus, um vor der Installation auf die App-Bundle-ID und die Versionsnummer zu überprüfen.",
- "installAsManagedMacOSLobApp": "Diese Einstellung gilt nur für macOS 11 und höher. Unter macOS 10.15 und früher wird die App installiert, aber nicht verwaltet.",
- "installContextDropdown": "Wählen Sie den entsprechenden Installationskontext aus. Durch den Benutzerkontext wird die App nur für den Zielbenutzer installiert, während sie durch den Gerätekontext für alle Benutzer auf dem Gerät installiert wird.",
- "ldapUrl": "Dies ist der LDAP-Hostname, über den Clients die öffentlichen Verschlüsselungskeys für E-Mail-Empfänger abrufen können. E-Mails werden verschlüsselt, wenn ein Key verfügbar ist. Unterstützte Formate:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Wählen Sie Laufzeitberechtigungen für die zugeordnete App.",
- "policyAssociatedApp": "Wählen Sie die App, der diese Richtlinie zugeordnet werden soll.",
- "policyConfigurationSettings": "Wählen Sie die Methode aus, die Sie zum Definieren von Konfigurationseinstellungen für diese Richtlinie verwenden möchten.",
- "policyDescription": "Geben Sie optional eine Beschreibung für diese Konfigurationsrichtlinie ein.",
- "policyEnrollmentType": "Wählen Sie aus, ob diese Einstellungen über die Geräteverwaltung oder über mit dem Intune-SDK erstellte Apps verwaltet werden.",
- "policyName": "Geben Sie einen Namen für diese Konfigurationsrichtlinie ein.",
- "policyPlatform": "Wählen Sie die Plattform aus, auf die diese App-Konfigurationsrichtlinie angewendet wird.",
- "policyProfileType": "Wählen Sie die Geräteprofiltypen aus, auf die dieses App-Konfigurationsprofil angewendet werden soll.",
- "policySMime": "Hiermit konfigurieren Sie S/MIME-Signatur- und Verschlüsselungseinstellungen für Outlook.",
- "sMimeDeployCertsFromIntune": "Geben Sie an, ob von Intune S/MIME-Zertifikate für die Verwendung mit Outlook bereitgestellt werden sollen oder nicht.\r\nIntune kann über das Unternehmensportal automatisch Signatur- und Verschlüsselungszertifikate für Benutzer bereitstellen.",
- "sMimeEnable": "Hiermit geben Sie an, ob S/MIME-Steuerelemente beim Verfassen einer E-Mail aktiviert werden.",
- "sMimeEnableAllowChange": "Geben Sie an, ob der Benutzer die Einstellung \"S/MIME aktivieren\" ändern darf.",
- "sMimeEncryptAllEmails": "Hiermit wird angegeben, ob alle E-Mails verschlüsselt werden müssen oder nicht.\r\nBei der Verschlüsselung werden Daten mithilfe eines Verschlüsselungsverfahrens konvertiert, sodass sie nur vom beabsichtigten Empfänger gelesen werden können.",
- "sMimeEncryptAllEmailsAllowChange": "Geben Sie an, ob der Benutzer die Einstellung \"Alle E-Mails verschlüsseln\" ändern darf.",
- "sMimeEncryptionCertProfile": "Geben Sie das Zertifikatprofil für die E-Mail-Verschlüsselung an.",
- "sMimeSignAllEmails": "Geben Sie an, ob alle E-Mail-Nachrichten signiert werden müssen oder nicht.\r\nEine digitale Signatur weist die Echtheit der E-Mail-Adresse nach und stellt sicher, dass der Inhalt während der Übertragung nicht verändert wird.",
- "sMimeSignAllEmailsAllowChange": "Geben Sie an, ob der Benutzer die Einstellung \"Alle E-Mails signieren\" ändern darf.",
- "sMimeSigningCertProfile": "Geben Sie das Zertifikatprofil für die E-Mail-Signatur an.",
- "sMimeUserNotificationType": "Das Verfahren, mit dem Benutzer darüber benachrichtigt werden, dass sie das Unternehmensportal öffnen müssen, um S/MIME-Zertifikate für Outlook abzurufen."
- },
+ "Languages": {
+ "ar-aE": "Arabisch (Vereinigte Arabische Emirate)",
+ "ar-bH": "Arabisch (Bahrain)",
+ "ar-dZ": "Arabisch (Algerien)",
+ "ar-eG": "Arabisch (Ägypten)",
+ "ar-iQ": "Arabisch (Irak)",
+ "ar-jO": "Arabisch (Jordanien)",
+ "ar-kW": "Arabisch (Kuwait)",
+ "ar-lB": "Arabisch (Libanon)",
+ "ar-lY": "Arabisch (Libyen)",
+ "ar-mA": "Arabisch (Marokko)",
+ "ar-oM": "Arabisch (Oman)",
+ "ar-qA": "Arabisch (Katar)",
+ "ar-sA": "Arabisch (Saudi-Arabien)",
+ "ar-sY": "Arabisch (Syrien)",
+ "ar-tN": "Arabisch (Tunesien)",
+ "ar-yE": "Arabisch (Jemen)",
+ "az-cyrl": "Aserbaidschanisch (Kyrillisch, Aserbaidschan)",
+ "az-latn": "Aserbaidschanisch (lateinisch, Aserbaidschan)",
+ "bn-bD": "Bangla (Bangladesch)",
+ "bn-iN": "Bangla (Indien)",
+ "bs-cyrl": "Bosnisch (Kyrillisch)",
+ "bs-latn": "Bosnisch (Lateinisch)",
+ "zh-cN": "Chinesisch (Volksrepublik China)",
+ "zh-hK": "Chinesisch (Hongkong SAR)",
+ "zh-mO": "Chinesisch (Macau SAR)",
+ "zh-sG": "Chinesisch (Singapur)",
+ "zh-tW": "Chinesisch (Taiwan)",
+ "hr-bA": "Kroatisch (Lateinisch)",
+ "hr-hR": "Kroatisch (Kroatien)",
+ "nl-bE": "Niederländisch (Belgien)",
+ "nl-nL": "Niederländisch (Niederlande)",
+ "en-aU": "Englisch (Australien)",
+ "en-bZ": "Englisch (Belize)",
+ "en-cA": "Englisch (Kanada)",
+ "en-cabn": "Englisch (Karibik)",
+ "en-iE": "Englisch (Irland)",
+ "en-iN": "Englisch (Indien)",
+ "en-jM": "Englisch (Jamaika)",
+ "en-mY": "Englisch (Malaysia)",
+ "en-nZ": "Englisch (Neuseeland)",
+ "en-pH": "Englisch (Republik Philippinen)",
+ "en-sG": "Englisch (Singapur)",
+ "en-tT": "Englisch (Trinidad und Tobago)",
+ "en-uK": "Englisch (Vereinigtes Königreich)",
+ "en-uS": "Englisch (Vereinigte Staaten)",
+ "en-zA": "Englisch (Südafrika)",
+ "en-zW": "Englisch (Zimbabwe)",
+ "fr-bE": "Französisch (Belgien)",
+ "fr-cA": "Französisch (Kanada)",
+ "fr-cH": "Französisch (Schweiz)",
+ "fr-fR": "Französisch (Frankreich)",
+ "fr-lU": "Französisch (Luxemburg)",
+ "fr-mC": "Französisch (Monaco)",
+ "de-aT": "Deutsch (Österreich)",
+ "de-cH": "Deutsch (Schweiz)",
+ "de-dE": "Deutsch (Deutschland)",
+ "de-lI": "Deutsch (Liechtenstein)",
+ "de-lU": "Deutsch (Luxemburg)",
+ "iu-cans": "Inuktitut (Silbenschrift, Kanada)",
+ "iu-latn": "Inuktitut (Lateinisch, Kanada)",
+ "it-cH": "Italienisch (Schweiz)",
+ "it-iT": "Italienisch (Italien)",
+ "ms-bN": "Malaiisch (Brunei Darussalam)",
+ "ms-mY": "Malaiisch (Malaysia)",
+ "mn-cN": "Mongolisch (Traditionelles Mongolisch, Volksrepublik China)",
+ "mn-mN": "Mongolisch (kyrillisch, Mongolei)",
+ "no-nB": "Norwegisch, Bokmål (Norwegen)",
+ "no-nn": "Norwegisch, Nynorsk (Norwegen)",
+ "pt-bR": "Portugiesisch (Brasilien)",
+ "pt-pT": "Portugiesisch (Portugal)",
+ "quz-bO": "Quechua (Bolivien)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Peru)",
+ "smj-nO": "Samisch (Lule, Norwegen)",
+ "smj-sE": "Samisch (Lule, Schweden)",
+ "se-fI": "Samisch (Nord, Finnland)",
+ "se-nO": "Samisch (Nord, Norwegen)",
+ "se-sE": "Samisch (Nord, Schweden)",
+ "sma-nO": "Samisch (Süd, Norwegen)",
+ "sma-sE": "Samisch (Süd, Schweden)",
+ "smn": "Samisch (Inari, Finnland)",
+ "sms": "Samisch (Skolt, Finnland)",
+ "sr-Cyrl-bA": "Serbisch (Kyrillisch)",
+ "sr-Cyrl-rS": "Serbisch (Kyrillisch, Serbien/Montenegro)",
+ "sr-Latn-bA": "Serbisch (Lateinisch)",
+ "sr-Latn-rS": "Serbisch (Lateinisch, Serbien)",
+ "dsb": "Niedersorbisch (Deutschland)",
+ "hsb": "Obersorbisch (Deutschland)",
+ "es-es-tradnl": "Spanisch (Spanien, traditionelle Sortierung)",
+ "es-aR": "Spanisch (Argentinien)",
+ "es-bO": "Spanisch (Bolivien)",
+ "es-cL": "Spanisch (Chile)",
+ "es-cO": "Spanisch (Kolumbien)",
+ "es-cR": "Spanisch (Costa Rica)",
+ "es-dO": "Spanisch (Dominikanische Republik)",
+ "es-eC": "Spanisch (Ecuador)",
+ "es-eS": "Spanisch (Spanien)",
+ "es-gT": "Spanisch (Guatemala)",
+ "es-hN": "Spanisch (Honduras)",
+ "es-mX": "Spanisch (Mexiko)",
+ "es-nI": "Spanisch (Nicaragua)",
+ "es-pA": "Spanisch (Panama)",
+ "es-pE": "Spanisch (Peru)",
+ "es-pR": "Spanisch (Puerto Rico)",
+ "es-pY": "Spanisch (Paraguay)",
+ "es-sV": "Spanisch (El Salvador)",
+ "es-uS": "Spanisch (USA)",
+ "es-uY": "Spanisch (Uruguay)",
+ "es-vE": "Spanisch (Venezuela)",
+ "sv-fI": "Schwedisch (Finnland)",
+ "uz-cyrl": "Usbekisch (kyrillisch, Usbekistan)",
+ "uz-latn": "Usbekisch (lateinisch, Usbekistan)",
+ "af": "Afrikaans (Südafrika)",
+ "sq": "Albanien (Albanisch)",
+ "am": "Amharisch (Äthiopien)",
+ "hy": "Armenisch (Armenien)",
+ "as": "Assamesisch (Indien)",
+ "ba": "Baschkirisch (Russische Föderation)",
+ "eu": "Baskisch (Baskisch)",
+ "be": "Belarussisch (Belarus)",
+ "br": "Bretonisch (Frankreich)",
+ "bg": "Bulgarisch (Bulgarien)",
+ "ca": "Katalanisch (Katalanisch)",
+ "co": "Korsisch (Frankreich)",
+ "cs": "Tschechisch (Tschechische Republik)",
+ "da": "Dänisch (Dänemark)",
+ "dv": "Divehi (Malediven)",
+ "et": "Estnisch (Estland)",
+ "fo": "Färöisch (Färöer)",
+ "fil": "Filipino (Philippinen)",
+ "fi": "Finnisch (Finnland)",
+ "gl": "Galicisch (Galicisch)",
+ "ka": "Georgisch (Georgien)",
+ "el": "Griechisch (Griechenland)",
+ "gu": "Gujarati (Indien)",
+ "ha": "Hausa (Lateinisch, Nigeria)",
+ "he": "Hebräisch (Israel)",
+ "hi": "Hindi (Indien)",
+ "hu": "Ungarisch (Ungarn)",
+ "is": "Isländisch (Island)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonesisch (Indonesien)",
+ "ga": "Irisch (Irland)",
+ "xh": "isiXhosa (Südafrika)",
+ "zu": "isiZulu (Südafrika)",
+ "ja": "Japanisch (Japan)",
+ "kn": "Kannada (Indien)",
+ "kk": "Kasachisch (Kasachstan)",
+ "km": "Khmer (Kambodscha)",
+ "rw": "Kinyarwanda (Ruanda)",
+ "sw": "Suaheli (Kenia)",
+ "kok": "Konkani (Indien)",
+ "ko": "Koreanisch (Südkorea)",
+ "ky": "Kirgisisch (Kirgisistan)",
+ "lo": "Laotisch (Demokratische Volksrepublik Laos)",
+ "lv": "Lettisch (Lettland)",
+ "lt": "Litauisch (Litauen)",
+ "lb": "Luxemburgisch (Luxemburg)",
+ "mk": "Mazedonisch (Nordmazedonien)",
+ "ml": "Malayalam (Indien)",
+ "mt": "Maltesisch (Malta)",
+ "mi": "Maori (Neuseeland)",
+ "mr": "Marathi (Indien)",
+ "moh": "Mohawk (Kanada)",
+ "ne": "Nepalesisch (Nepal)",
+ "oc": "Okzitanisch (Frankreich)",
+ "or": "Odia (Indien)",
+ "ps": "Paschtu (Afghanistan)",
+ "fa": "Persisch",
+ "pl": "Polnisch (Polen)",
+ "pa": "Punjabi (Indien)",
+ "ro": "Rumänisch (Rumänien)",
+ "rm": "Rätoromanisch (Schweiz)",
+ "ru": "Russisch (Russische Föderation)",
+ "sa": "Sanskrit (Indien)",
+ "st": "Sesotho sa Leboa (Südafrika)",
+ "tn": "Tswana (Südafrika)",
+ "si": "Singhalesisch (Sri Lanka)",
+ "sk": "Slowakisch (Slowakei)",
+ "sl": "Slowenisch (Slowenien)",
+ "sv": "Schwedisch (Schweden)",
+ "syr": "Syrisch (Syrien)",
+ "tg": "Tadschikisch (Kyrillisch, Tadschikistan)",
+ "ta": "Tamil (Indien)",
+ "tt": "Tatarisch (Russische Föderation)",
+ "te": "Telugu (Indien)",
+ "th": "Thailändisch (Thailand)",
+ "bo": "Tibetanisch (VR China)",
+ "tr": "Türkisch (Türkei)",
+ "tk": "Turkmenisch (Turkmenistan)",
+ "uk": "Ukrainisch (Ukraine)",
+ "ur": "Urdu (Islamische Republik Pakistan)",
+ "vi": "Vietnamesisch (Vietnam)",
+ "cy": "Walisisch (Vereinigtes Königreich)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (Volksrepublik China)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Integrierte Rolle",
+ "customCloudPCRole": "Benutzerdefinierte Windows 365-Rolle",
+ "customIntuneRole": "Benutzerdefinierte Intune-Rolle",
+ "customRole": "Benutzerdefinierte Rolle"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "App-Version",
+ "dependencyName": "Abhängigkeitsname",
+ "lastModifiedTime": "Zeitpunkt der letzten Änderung",
+ "relationship": "Beziehung",
+ "replaced": "Ersetzt",
+ "searchPlaceholder": "Nach App-Name filtern",
+ "status": "Statusdetails",
+ "statusDetails": "Status",
+ "supersedenceName": "Ablösungsname"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Untergeordnete Abhängigkeit",
+ "indirectSupersedence": "Nicht direkt verknüpft",
+ "supersedenceAncestors": "Wir abgelöst",
+ "supersedenceDescendants": "Abgelöst"
+ },
+ "SupersededReplaced": {
+ "no": "Nein",
+ "yes": "Ja"
+ },
+ "Tabs": {
+ "chart": "Diagramm",
+ "dependency": "Abhängigkeit",
+ "label": "Anzeigen: ",
+ "supersedence": "Ablösung",
+ "table": "Tabelle"
+ },
+ "dependencyGraphAriaLabel": "Diagramm zur App-Abhängigkeit",
+ "supersedenceGraphAriaLabel": "App-Ablösungsdiagramm"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Wartezeit in Tagen bis zum erzwungenen Neustart"
+ },
+ "Description": {
+ "label": "Beschreibung"
+ },
+ "Name": {
+ "label": "Name"
+ },
+ "QualityUpdateRelease": {
+ "label": "Installation von Qualitätsupdates beschleunigen, wenn die Gerätebetriebssystemversion niedriger ist als:"
+ },
+ "bladeTitle": "Qualitätsupdates Windows 10 und höher (Vorschau)",
+ "loadError": "Fehler beim Laden."
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Einstellungen"
+ },
+ "infoBoxText": "Die einzige dedizierte Qualitätsupdatesteuerung, die derzeit außer der vorhandenen Updateringrichtlinie für Windows 10 und höher verfügbar ist, ist die Möglichkeit, Qualitätsupdates für Geräte zu beschleunigen, die hinter eine bestimmte Patchebene fallen. Weitere Steuerelemente werden in Zukunft verfügbar sein.",
+ "licenseLearnMoreText": "Erfahren Sie mehr über Voraussetzungen und Richtlinien für Qualitätsupdates.",
+ "licenseWarningBoxText": "Zum Erstellen von Richtlinien für Qualitätsupdates ist eine bestimmte Lizenzierung erforderlich.",
+ "warningBoxText": "Die Beschleunigung von Softwareupdates kann zwar dazu beitragen, bei Bedarf eine schnellere Konformität zu erzielen, sie hat aber einen größeren Einfluss auf die Produktivität der Endbenutzer. Die Wahrscheinlichkeit, dass ein Neustart während der Geschäftszeiten erfolgt, ist deutlich erhöht."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "Unter Android können Sie die Identifikation per Fingerabdruck anstelle einer PIN verwenden. Benutzer werden aufgefordert, ihren Fingerabdruck bereitzustellen, wenn sie mit ihren Geschäftskonten auf diese App zugreifen.",
+ "iOS": "Auf iOS-/iPadOS-Geräten können Sie den Benutzern auch ermöglichen, sich statt mit einer PIN per Fingerabdruck zu identifizieren. Benutzer werden aufgefordert, ihren Fingerabdruck zu scannen, wenn sie mit ihrem Geschäftskonto auf diese App zugreifen.",
+ "mac": "Auf Mac-Geräten können Sie den Benutzern auch ermöglichen, sich statt mit einer PIN per Fingerabdruck zu identifizieren. Benutzer werden aufgefordert, ihren Fingerabdruck zu scannen, wenn sie mit ihrem Geschäftskonto auf diese App zugreifen."
+ },
+ "allowWidgetContentSync": "Wählen Sie „Blockieren“ aus, um zu verhindern, dass richtlinienseitig verwaltete Apps Daten in App-Widgets speichern. Wenn Sie „Zulassen“ auswählen, kann die richtlinienseitig verwaltete App Daten in App-Widgets speichern, wenn diese Features in der richtlinienseitig verwalteten App unterstützt und aktiviert werden. \r\n\r\n \r\n\r\nApps bieten möglicherweise zusätzliche Konfigurationsfunktionen mit App-Konfigurationsrichtlinien. Weitere Informationen finden Sie in der Dokumentation der App.",
+ "appSharingFromLevel1": "Wählen Sie eine der folgenden Optionen aus, um die Apps anzugeben, von denen diese App Daten empfangen darf:",
+ "appSharingFromLevel2": "{0}: Empfang von Daten in Organisationsdokumenten und Konten nur von anderen richtlinienverwalteten Apps zulassen",
+ "appSharingFromLevel3": "{0}: Empfang von Daten aus beliebigen Apps in Organisationsdokumenten und Konten zulassen",
+ "appSharingFromLevel4": "{0}: Empfang von Daten aus anderen Apps in Organisationsdokumenten oder Konten nicht zulassen",
+ "appSharingFromLevel5": "{0}: Datenübertragungen aus anderen Apps zulassen und alle eingehenden Daten ohne Benutzeridentität als Organisationsdaten behandeln.",
+ "appSharingToLevel1": "Wählen Sie eine der folgenden Optionen aus, um die Apps anzugeben, an die diese App Daten senden darf:",
+ "appSharingToLevel2": "{0}: Senden von Organisationsdaten nur an andere richtlinienverwaltete Apps zulassen",
+ "appSharingToLevel3": "{0}: Senden von Organisationsdaten an beliebige Apps zulassen",
+ "appSharingToLevel4": "{0}: Senden von Organisationsdaten an andere Apps nicht zulassen",
+ "appSharingToLevel5": "{0}: Nur Übertragung an andere richtlinienverwaltete Apps und Dateiübertragungen an andere MDM-verwaltete Apps auf registrierten Geräten zulassen",
+ "appSharingToLevel6": "{0}: Nur Übertragungen an andere richtlinienverwaltete Apps zulassen und Betriebssystem-Dialogfelder „Öffnen in“/„Freigeben“ filtern, sodass nur per Richtlinie verwaltete Apps angezeigt werden",
+ "assignmentFilterEdit1": "Wenn Sie Zuweisungsfilter auf diese Richtlinie anwenden, wird die Eigenschaft „Geräteverwaltungstyp“ zusätzlich zu den Werten angewendet, die für „Apps auf allen Gerätetypen anvisieren“ und „Gerätetypen“ auf der Seite „Apps“ angegeben sind.",
+ "assignmentFilterEdit2": "Weitere Informationen zum Zuweisen von App-Schutzrichtlinien.",
+ "conditionalEncryption1": "Wählen Sie „{0}“ aus, um die App-Verschlüsselung für den internen App-Speicher zu deaktivieren, wenn auf einem registrierten Gerät eine aktive Geräteverschlüsselung ermittelt wurde.",
+ "conditionalEncryption2": "Hinweis: Intune kann nur Geräte ermitteln, die mit Intune MDM registriert wurden. Externer App-Speicher wird weiterhin verschlüsselt, um sicherzustellen, dass nicht verwaltete Anwendungen nicht auf Daten zugreifen können.",
+ "contactSyncMac": "Wenn diese Option deaktiviert ist, können Apps keine Kontakte im nativen Adressbuch speichern.",
+ "contactsSync": "Wählen Sie Blockieren aus, um zu verhindern, dass durch Richtlinien verwaltete Apps Daten in den nativen Apps des Geräts speichern (z. B. Kontakte, Kalender und Widgets), oder um die Verwendung von Add-Ins innerhalb der durch Richtlinien verwalteten Apps zu verhindern. Wenn Sie Zulassen auswählen, kann die durch Richtlinien verwaltete App Daten in den nativen Apps speichern oder Add-Ins verwenden, sofern diese Features in der durch Richtlinien verwalteten App unterstützt werden und aktiviert sind.
Apps bieten möglicherweise zusätzliche Konfigurationsfunktionen anhand von App-Konfigurationsrichtlinien. Weitere Informationen finden Sie in der Dokumentation der App.",
+ "deviceTypeTargetingCreate1": "Die Zielgruppenadressierung des Gerätetyps wurde in den Schritt „Zuweisungen“ bei der Richtlinienerstellung verschoben.",
+ "deviceTypeTargetingEdit1": "Wenn Sie Zuweisungsfilter auf diese Richtlinie anwenden, wird die Eigenschaft „Geräteverwaltungstyp“ zusätzlich zu den Werten angewendet, die für „Apps auf allen Gerätetypen anvisieren“ und „Gerätetypen“ auf der Seite „Apps“ angegeben sind.",
+ "deviceTypeTargetingEdit2": "Um die Zielgruppenadressierung für Geräteverwaltungstypen zu bearbeiten, setzen Sie „Apps auf allen Gerätetypen anvisieren“ = „Ja“ zurück. Erstellen Sie dann einen MAM-Zuweisungsfilter mit den gewünschten Werten für „Geräteverwaltungstyp“.",
+ "deviceTypeTargetingHasMoved": "Weitere Informationen zum Zuweisen von Appschutz-Richtlinie",
+ "encryptionAndroid1": "Bei Apps, die einer Intune-Richtlinie für die Verwaltung mobiler Anwendungen zugeordnet sind, wird die Verschlüsselung durch Microsoft bereitgestellt. Daten werden bei Datei-E/A-Vorgängen gemäß den Einstellungen in der Richtlinie für die Verwaltung mobiler Anwendungen synchron verschlüsselt. Verwaltete Apps unter Android verwenden AES-128-Verschlüsselung im CBC-Modus unter Verwendung der plattformeigenen Kryptografiebibliotheken. Die Verschlüsselungsmethode ist nicht mit FIPS 140-2 konform. Die SHA-256-Verschlüsselung wird als explizite Anweisung unter Verwendung des SigAlg-Parameters unterstützt und funktioniert nur auf Geräten mit Version 4.2 und höher. Inhalte im Gerätespeicher werden immer verschlüsselt.",
+ "encryptionAndroid2": "Wenn Sie in Ihrer App-Richtlinie eine Verschlüsselung anfordern, müssen Endbenutzer eine PIN einrichten und verwenden, um auf das Gerät zuzugreifen. Wenn keine PIN für den Gerätezugriff eingerichtet wurde, werden die Apps nicht gestartet, und den Benutzern wird stattdessen diese Meldung angezeigt: „Ihr Unternehmen hat festgelegt, dass Sie zunächst eine Geräte-PIN aktivieren müssen, um auf diese Anwendung zuzugreifen.“",
+ "encryptionMac1": "Bei Apps, die einer Intune-Richtlinie für die Verwaltung mobiler Anwendungen zugeordnet sind, wird die Verschlüsselung durch Microsoft bereitgestellt. Daten werden bei Datei-E/A-Vorgängen gemäß den Einstellungen in der Richtlinie für die Verwaltung mobiler Anwendungen synchron verschlüsselt. Verwaltete Apps unter Mac verwenden AES-128-Verschlüsselung im CBC-Modus unter Verwendung der plattformeigenen Kryptografiebibliotheken. Die Verschlüsselungsmethode ist nicht mit FIPS 140-2 konform. Die SHA-256-Verschlüsselung wird als explizite Anweisung unter Verwendung des SigAlg-Parameters unterstützt und funktioniert nur auf Geräten mit Version 4.2 und höher. Inhalte im Gerätespeicher werden immer verschlüsselt.",
+ "faceId1": "Gegebenenfalls können Sie die Verwendung der Gesichtserkennung anstelle einer PIN erlauben. Benutzer werden aufgefordert, beim Zugriff auf diese Anwendung über ihre Arbeitskonten eine Gesichtserkennung bereitzustellen.",
+ "faceId2": "Wählen Sie Ja, um für den App-Zugriff die Gesichtserkennung anstelle einer PIN zu erlauben.",
+ "managementLevelsAndroid1": "Über diese Option geben Sie an, ob diese Richtlinie für Geräte des Android-Geräteadministrators, für Android Enterprise-Geräte oder für nicht verwaltete Geräte gilt.",
+ "managementLevelsAndroid2": "{0}: Nicht verwaltete Geräte sind Geräte, auf denen Intune MDM nicht erkannt wurde. Dazu gehören auch MDM-Drittanbieter.",
+ "managementLevelsAndroid3": "{0}: Von Intune verwaltete Geräte, die die Android-Geräteverwaltungs-API verwenden.",
+ "managementLevelsAndroid4": "{0}: Von Intune verwaltete Geräte, die Android Enterprise-Arbeitsprofile oder Android Enterprise Full Device Management verwenden.",
+ "managementLevelsIos1": "Über diese Option geben Sie an, ob diese Richtlinie für über MDM verwaltete Geräte oder für nicht verwaltete Geräte gilt.",
+ "managementLevelsIos2": "{0}: Nicht verwaltete Geräte sind Geräte, auf denen Intune MDM nicht erkannt wurde. Dazu gehören auch MDM-Drittanbieter.",
+ "managementLevelsIos3": "{0}: Verwaltete Geräte werden über Intune MDM verwaltet.",
+ "minAppVersion": "Definieren Sie die erforderliche App-Mindestversionsnummer, über die ein Benutzer für den sicheren Zugriff auf die App verfügen muss.",
+ "minAppVersionWarning": "Definieren Sie die empfohlene App-Mindestversionsnummer, über die ein Benutzer für den sicheren Zugriff auf die App verfügen sollte.",
+ "minOsVersion": "Definieren Sie die erforderliche Mindestversionsnummer für das Betriebssystem, über die ein Benutzer für den sicheren Zugriff auf die App verfügen muss.",
+ "minOsVersionWarning": "Definieren Sie die empfohlene Mindestversionsnummer für das Betriebssystem, über die ein Benutzer für den sicheren Zugriff auf die App verfügen sollte.",
+ "minPatchVersion": "Definieren Sie die niedrigste erforderliche Android-Sicherheitspatchebene, die ein Benutzer für den sicheren Zugriff auf die App verwenden kann.",
+ "minPatchVersionWarning": "Definieren Sie die niedrigste empfohlene Android-Sicherheitspatchebene, die ein Benutzer für den sicheren Zugriff auf die App verwenden kann.",
+ "minSdkVersion": "Definieren Sie die erforderliche SDK-Version für Intune-Anwendungsschutzrichtlinien, über die ein Benutzer für den sicheren Zugriff auf die App verfügen muss.",
+ "requireAppPinDefault": "
Wählen Sie Ja aus, um die App-PIN zu deaktivieren, wenn eine Gerätesperre auf einem registrierten Gerät erkannt wurde.
",
+ "targetAllApps1": "Mit dieser Option legen Sie fest, dass Ihre Richtlinie für Apps auf Geräten mit beliebigem Verwaltungsstatus gilt.",
+ "targetAllApps2": "Bei der Auflösung von Richtlinienkonflikten wird diese Einstellung außer Kraft gesetzt, wenn ein Benutzer die Richtlinie für einen bestimmten Verwaltungsstatus festgelegt hat.",
+ "touchId2": "Wählen Sie „{0}“ aus, um für den Zugriff auf die App eine Identifizierung per Fingerabdruck statt per PIN anzufordern."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Geben Sie die Anzahl von Tagen an, nach denen der Benutzer die PIN zurücksetzen muss.",
+ "previousPinBlockCount": "Mit dieser Einstellung wird die Anzahl der vorherigen PINs angegeben, die Intune beibehält. Neue PINs müssen sich von denen unterscheiden, die Intune verwaltet."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Hiermit wird Windows Search das Fortsetzen der Suche in verschlüsselten Daten ermöglicht.",
+ "authoritativeIpRanges": "Aktivieren Sie diese Einstellung, wenn Sie die automatische Windows-Erkennung von IP-Bereichen außer Kraft setzen möchten.",
+ "authoritativeProxyServers": "Aktivieren Sie diese Einstellung, wenn Sie die automatische Windows-Erkennung von Proxyservern außer Kraft setzen möchten.",
+ "checkInput": "Eingabe auf Gültigkeit prüfen",
+ "dataRecoveryCert": "Ein Wiederherstellungszertifikat ist ein spezielles EFS-Zertifikat (Encrypting File System, verschlüsselndes Dateisystem), mit dem Sie verschlüsselte Dateien wiederherstellen können, wenn Ihr Verschlüsselungsschlüssel verloren geht oder beschädigt wird. Sie müssen das Wiederherstellungszertifikat erstellen und hier angeben. Weitere Informationen finden Sie hier.",
+ "enterpriseCloudResources": "
Geben Sie Cloudressourcen an, die als unternehmenseigene Ressourcen eingestuft und mit der Windows Information Protection-Richtlinie geschützt werden sollen. Sie können mehrere Ressourcen angeben, indem Sie die einzelnen Einträge durch das Zeichen „|“ voneinander trennen.
Wenn Sie in Ihrem Unternehmen einen Proxy konfiguriert haben, können Sie den Proxy angeben, über den der Datenverkehr zu den von Ihnen angegebenen Cloudressourcen geleitet werden soll.
URL[,Proxy]|URL[,Proxy]
Ohne Proxy: contoso.sharepoint.com|contoso.visualstudio.com Mit Proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Geben Sie die IPv4-Bereiche an, aus denen Ihr Unternehmensnetzwerk gebildet wird. Diese werden zusammen mit den angegebenen Domänennamen für das Unternehmensnetzwerk verwendet, um die Grenzen Ihres Unternehmensnetzwerks zu definieren.
Für diese Einstellung muss Windows Information Protection aktiviert sein.
Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Komma voneinander trennen.
Geben Sie die IPv6-Bereiche an, aus denen Ihr Unternehmensnetzwerk gebildet wird. Diese werden zusammen mit den angegebenen Domänennamen für das Unternehmensnetzwerk verwendet, um die Grenzen Ihres Unternehmensnetzwerks zu definieren.
Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Komma voneinander trennen.
Wenn Sie in Ihrem Unternehmen einen Proxy konfiguriert haben, können Sie den Proxy festlegen, über den der Datenverkehr an die in den Unternehmenscloudressourcen-Einstellungen angegebenen Cloudressourcen geleitet werden soll.
Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Semikolon voneinander trennen.
Geben Sie die DNS-Namen an, aus denen Ihr Unternehmensnetzwerk gebildet wird. Diese werden zusammen mit den festgelegten IP-Bereichen verwendet, um die Grenzen Ihres Unternehmensnetzwerks zu definieren. Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Komma voneinander trennen.
Für diese Einstellung muss Windows Information Protection aktiviert sein.
Beispiel: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Geben Sie die DNS-Namen an, aus denen Ihr Unternehmensnetzwerk gebildet wird. Diese werden zusammen mit den festgelegten IP-Bereichen verwendet, um die Grenzen Ihres Unternehmensnetzwerks zu definieren. Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch „|“ voneinander trennen.
Für diese Einstellung muss Windows Information Protection aktiviert sein.
Beispiel: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
Wenn Sie extern zugängliche Proxys in Ihrem Unternehmensnetzwerk verwenden, geben Sie diese hier an. Bei der Angabe einer Proxyserveradresse müssen Sie auch den Port angeben, über den Datenverkehr zugelassen und durch Windows Information Protection geschützt werden soll.
Hinweis: Diese Liste darf keine Server aus Ihrer Liste interner Unternehmensproxyserver umfassen. Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Semikolon voneinander trennen.
",
+ "maxInactivityTime1": "Gibt den maximal zulässigen Zeitraum (in Minuten) nach dem Wechsel eines Geräts in den Leerlauf an, bis das Gerät durch die PIN oder ein Kennwort gesperrt wird. Benutzer können einen beliebigen Timeoutwert auswählen, der kleiner ist als der in der Einstellungen-App angegebene maximale Zeitraum. Beachten Sie, dass für Lumia 950 und 950XL unabhängig von dem durch diese Richtlinie festgelegten Wert ein maximaler Timeoutwert von 5 Minuten gilt.",
+ "maxInactivityTime2": "0 (Standard): Kein Timeout definiert. Der Standardwert „0“ wird als „Kein Timeout definiert“ interpretiert.",
+ "maxPasswordAttempts1": "Diese Richtlinie zeigt auf dem Mobilgerät und auf dem Desktop unterschiedliche Verhaltensweisen.",
+ "maxPasswordAttempts2": "Wenn der Benutzer auf einem Mobilgerät den durch diese Richtlinie festgelegten Wert erreicht, wird das Gerät zurückgesetzt.",
+ "maxPasswordAttempts3": "Wenn der Benutzer auf einem Desktop den durch diese Richtlinie festgelegten Wert erreicht, wird er nicht zurückgesetzt. Stattdessen wird der Desktop in den BitLocker-Wiederherstellungsmodus versetzt, in dem die Daten nicht zugänglich, aber wiederherstellbar sind. Wenn BitLocker nicht aktiviert ist, kann die Richtlinie nicht durchgesetzt werden.",
+ "maxPasswordAttempts4": "Vor dem Erreichen des Grenzwerts für fehlerhafte Versuche wird der Benutzer zum Sperrbildschirm geschickt und darauf hingewiesen, dass der Computer bei weiteren Fehlversuchen gesperrt wird. Wenn der Benutzer den Grenzwert erreicht, wird das Gerät automatisch neu gestartet und zeigt die BitLocker-Wiederherstellungsseite an. Auf dieser Seite wird der Benutzer aufgefordert, den BitLocker-Wiederherstellungsschlüssel einzugeben.",
+ "maxPasswordAttempts5": "0 (Standard): Das Gerät wird nach einer fehlerhaften PIN- oder Kennworteingabe niemals zurückgesetzt.",
+ "maxPasswordAttempts6": "Der sicherste Wert ist 0, wenn für alle Richtlinienwerte 0 festgelegt wurde; andernfalls ist der Mindestwert für die Richtlinie der sicherste Wert.",
+ "mdmDiscoveryUrl": "Geben Sie die URL für den MDM-Registrierungsendpunkt an, der von Benutzern verwendet werden soll, die sich bei MDM registrieren. Standardmäßig wird diese für Intune angegeben.",
+ "minimumPinLength1": "Der ganzzahlige Wert, der die Mindestanzahl von für die PIN erforderlichen Zeichen festlegt. Der Standardwert ist 4. Die niedrigste Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 4. Die größte Zahl, die Sie konfigurieren können, muss geringer sein als die Zahl, die in der Richtlinieneinstellung für die maximale PIN-Länge konfiguriert wurde, in jedem Fall jedoch geringer als 127.",
+ "minimumPinLength2": "Wenn Sie diese Richtlinieneinstellung konfigurieren, muss die PIN-Länge mindestens dieser Zahl entsprechen. Wenn Sie diese Richtlinieneinstellung deaktivieren oder nicht konfigurieren, muss die PIN mindestens 4 Zeichen lang sein.",
+ "name": "Der Name dieser Netzwerkgrenze",
+ "neutralResources": "
Wenn Sie Endpunkte für die Authentifizierungsumleitung in Ihrem Unternehmen verwenden, geben Sie diese hier an. Die hier angegebenen Standorte werden je nach Kontext der Verbindung vor der Umleitung entweder als private Standorte oder als Unternehmensstandorte eingestuft.
Sie können mehrere Werte angeben, indem Sie die einzelnen Einträge durch ein Komma voneinander trennen.
Beispiel: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Der Wert, der Windows Hello for Business als Methode zum Anmelden bei Windows festlegt.",
+ "passportForWork2": "Der Standardwert ist TRUE. Wenn Sie diese Richtlinie auf FALSE festlegen, kann der Benutzer Windows Hello for Business nur auf in Microsoft Entra eingebundenen Mobiltelefonen bereitstellen, auf denen die Bereitstellung erforderlich ist.",
+ "pinExpiration": "Die größte Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 730. Die niedrigste Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 0. Wenn diese Richtlinie auf 0 festgelegt wird, läuft die PIN des Benutzers niemals ab.",
+ "pinHistory1": "Die größte Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 50. Die niedrigste Zahl, die Sie für diese Richtlinieneinstellung konfigurieren können, ist 0. Wenn diese Richtlinie auf 0 festgelegt wird, ist die Speicherung vorheriger PINs nicht erforderlich.",
+ "pinHistory2": "Die aktuelle PIN des Benutzers ist in der Menge von PINs enthalten, die dem Benutzerkonto zugeordnet sind. Der PIN-Verlauf wird bei einer PIN-Zurücksetzung nicht beibehalten.",
+ "protectUnderLock": "Schützt App-Inhalte, während sich das Gerät im gesperrten Zustand befindet.",
+ "protectionModeBlock": "
Blockieren: Verhindert, dass Unternehmensdaten geschützte Apps verlassen.
",
+ "protectionModeOff": "
Aus: Der Benutzer kann Daten aus geschützten Apps verschieben. Es werden keine Aktionen protokolliert.
",
+ "protectionModeOverride": "
Außerkraftsetzungen zulassen: Der Benutzer wird abgefragt, wenn er versucht, Daten aus einer geschützten in eine nicht geschützte App zu verschieben. Wenn der Benutzer die Abfrage außer Kraft setzt, wird die Aktion protokolliert.
",
+ "protectionModeSilent": "
Im Hintergrund: Der Benutzer kann Daten aus geschützten Apps verschieben. Diese Aktionen werden protokolliert.
",
+ "required": "Erforderlich",
+ "revokeOnMdmHandoff": "Wurde in Windows 10, Version 1703, hinzugefügt. Diese Richtlinie steuert, ob die WIP-Schlüssel widerrufen werden, wenn auf einem Gerät ein Upgrade von MAM auf MDM durchgeführt wird. Ist diese Option deaktiviert, werden die Schlüssel nicht widerrufen, und der Benutzer kann nach dem Upgrade weiterhin auf geschützte Dateien zugreifen. Dies wird empfohlen, wenn der MDM-Dienst mit derselben WIP-EnterpriseID wie der MAM-Dienst konfiguriert ist.",
+ "revokeOnUnenroll": "Hiermit werden Verschlüsselungsschlüssel widerrufen, wenn ein Gerät die Registrierung bei dieser Richtlinie aufhebt.",
+ "rmsTemplateForEdp": "Die TemplateID-GUID zur Verwendung für die RMS-Verschlüsselung. Durch die Azure RMS-Vorlage kann der IT-Administrator konfigurieren, wer wie lange auf die RMS-geschützte Datei zugreifen kann.",
+ "showWipIcon": "Hiermit wird der Benutzer durch das Überlagern eines Symbols darauf hingewiesen, dass er gerade in einem Unternehmenskontext agiert.",
+ "useRmsForWip": "Gibt an, ob die Azure RMS-Verschlüsselung für WIP zulässig ist."
+ },
+ "requireAppPin": "
Wählen Sie Ja aus, um die App-PIN zu deaktivieren, wenn eine Gerätesperre auf einem registrierten Gerät erkannt wurde.
Hinweis: Intune kann unter iOS/iPadOS keine Geräteregistrierung mit einer Drittanbieter-EMM-Lösung erkennen.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Benutzerdefiniertes Skript erstellen",
+ "edit": "Benutzerdefiniertes Skript bearbeiten"
+ },
+ "basicInfo": "Erstellen Sie ein neues benutzerdefiniertes Skriptpaket aus von Ihnen geschriebenen Skripts für Erkennung und Wartung.",
+ "customScriptCapitalized": "Benutzerdefiniertes Skript",
+ "customScriptLowercase": "benutzerdefiniertes Skript",
+ "detectionScript": "Erkennungsskript"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Standard",
+ "header": "Updatepriorität",
+ "postponed": "Zurückgestellt",
+ "priority": "Hohe Priorität"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Automatische Aktualisierung",
+ "sublabel": "Wenn abgelöste Apps vom Benutzer von Unternehmensportal installiert wurden, muss die abgelöste App installiert werden."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Hintergrund",
+ "displayText": "Inhaltsdownload in {0}",
+ "foreground": "Vordergrund",
+ "header": "Priorität der Bereitstellungsoptimierung"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Dem Benutzer das Aufschieben der Neustartbenachrichtigung gestatten",
+ "countdownDialog": "Wählen Sie aus, wann das Dialogfeld \"Minuten bis zum Neustart\" vor der Durchführung des Neustarts angezeigt wird.",
+ "durationInMinutes": "Kulanzzeitraum für Geräteneustart (Minuten)",
+ "snoozeDurationInMinutes": "Zeitraum bis zur erneuten Erinnerung auswählen (Minuten)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Zeitzone",
+ "local": "Geräte-Zeitzone",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Datum und Uhrzeit",
+ "deadlineTimeColumnLabel": "Installationsstichtag",
+ "deadlineTimeDatePickerErrorMessage": "Das ausgewählte Datum muss nach dem Verfügbarkeitsdatum liegen.",
+ "deadlineTimeLabel": "Stichtag für App-Installation",
+ "defaultTime": "So bald wie möglich",
+ "infoText": "Diese Anwendung ist gleich nach der Bereitstellung verfügbar, wenn Sie unten keine Verfügbarkeitszeit angeben. Wenn es sich um eine erforderliche Anwendung handelt, können Sie den Installationsstichtag angeben.",
+ "specificTime": "Bestimmtes Datum und bestimmte Uhrzeit",
+ "startTimeColumnLabel": "Verfügbarkeit",
+ "startTimeDatePickerErrorMessage": "Das ausgewählte Datum muss vor dem Stichtag liegen.",
+ "startTimeLabel": "App-Verfügbarkeit"
+ },
+ "restartGracePeriodHeader": "Kulanzzeitraum neu starten",
+ "restartGracePeriodLabel": "Kulanzzeitraum für Geräteneustart",
+ "summaryTitle": "Funktionalität für Endbenutzer"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Weisen Sie mindestens einer Gruppe ein benutzerdefiniertes Attribut zu. Wechseln Sie zu \"Eigenschaften\", um Zuweisungen zu bearbeiten.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Shell-Skript",
"successfullySavedPolicy": "\"{0}\" wurde gespeichert."
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64 Bit",
+ "thirtyTwoBit": "32 Bit"
+ },
+ "Countries": {
+ "ae": "Vereinigte Arabische Emirate",
+ "ag": "Antigua und Barbuda",
+ "ai": "Anguilla",
+ "al": "Albanien",
+ "am": "Armenien",
+ "ao": "Angola",
+ "ar": "Argentinien",
+ "at": "Österreich",
+ "au": "Australien",
+ "az": "Aserbaidschan",
+ "bb": "Barbados",
+ "be": "Belgien",
+ "bf": "Burkina Faso",
+ "bg": "Bulgarien",
+ "bh": "Bahrain",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei Darussalam",
+ "bo": "Bolivien",
+ "br": "Brasilien",
+ "bs": "Bahamas",
+ "bt": "Bhutan",
+ "bw": "Botsuana",
+ "by": "Belarus",
+ "bz": "Belize",
+ "ca": "Kanada",
+ "cg": "Republik Kongo",
+ "ch": "Schweiz",
+ "cl": "Chile",
+ "cn": "China",
+ "co": "Kolumbien",
+ "cr": "Costa Rica",
+ "cv": "Cabo Verde",
+ "cy": "Zypern",
+ "cz": "Tschechische Republik",
+ "de": "Deutschland",
+ "dk": "Dänemark",
+ "dm": "Dominica",
+ "do": "Dominikanische Republik",
+ "dz": "Algerien",
+ "ec": "Ecuador",
+ "ee": "Estland",
+ "eg": "Ägypten",
+ "es": "Spanien",
+ "fi": "Finnland",
+ "fj": "Fidschi",
+ "fm": "Föderierte Staaten von Mikronesien",
+ "fr": "Frankreich",
+ "gb": "Vereinigtes Königreich",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Griechenland",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hongkong",
+ "hn": "Honduras",
+ "hr": "Kroatien",
+ "hu": "Ungarn",
+ "id": "Indonesien",
+ "ie": "Irland",
+ "il": "Israel",
+ "in": "Indien",
+ "is": "Island",
+ "it": "Italien",
+ "jm": "Jamaika",
+ "jo": "Jordanien",
+ "jp": "Japan",
+ "ke": "Kenia",
+ "kg": "Kirgisistan",
+ "kh": "Kambodscha",
+ "kn": "St. Kitts und Nevis",
+ "kr": "Republik Korea",
+ "kw": "Kuwait",
+ "ky": "Kaimaninseln",
+ "kz": "Kasachstan",
+ "la": "Demokratische Volksrepublik Laos",
+ "lb": "Libanon",
+ "lc": "St. Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Litauen",
+ "lu": "Luxemburg",
+ "lv": "Lettland",
+ "md": "Republik Moldau",
+ "mg": "Madagaskar",
+ "mk": "Nordmazedonien",
+ "ml": "Mali",
+ "mn": "Mongolei",
+ "mo": "Macau",
+ "mr": "Mauretanien",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Mexiko",
+ "my": "Malaysia",
+ "mz": "Mosambik",
+ "na": "Namibia",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Niederlande",
+ "no": "Norwegen",
+ "np": "Nepal",
+ "nz": "Neuseeland",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua-Neuguinea",
+ "ph": "Philippinen",
+ "pk": "Pakistan",
+ "pl": "Polen",
+ "pt": "Portugal",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Katar",
+ "ro": "Rumänien",
+ "ru": "Russische Föderation",
+ "sa": "Saudi-Arabien",
+ "sb": "Salomonen",
+ "sc": "Seychellen",
+ "se": "Schweden",
+ "sg": "Singapur",
+ "si": "Slowenien",
+ "sk": "Slowakei",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Suriname",
+ "st": "São Tomé und Príncipe",
+ "sv": "El Salvador",
+ "sz": "Swasiland",
+ "tc": "Turks- und Caicosinseln",
+ "td": "Tschad",
+ "th": "Thailand",
+ "tj": "Tadschikistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunesien",
+ "tr": "Türkei",
+ "tt": "Trinidad und Tobago",
+ "tw": "Taiwan",
+ "tz": "Tansania",
+ "ua": "Ukraine",
+ "ug": "Uganda",
+ "us": "Vereinigte Staaten",
+ "uy": "Uruguay",
+ "uz": "Usbekistan",
+ "vc": "St. Vincent und die Grenadinen",
+ "ve": "Venezuela",
+ "vg": "Britische Jungferninseln",
+ "vn": "Vietnam",
+ "ye": "Jemen",
+ "za": "Südafrika",
+ "zw": "Simbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Diese Einstellung kann nicht über den OMA-URI konfiguriert werden, da sie im Einstellungskatalog verfügbar ist. Navigieren Sie zum Einstellungskatalog, um diese Einstellung zu konfigurieren."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Wählen Sie eine Konfigurationsprofildatei aus."
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Diese Einstellungen funktionieren für Geräte, die mit oder ohne Benutzergenehmigung über die Geräteregistrierung registriert wurden, und für Geräte, die mit der automatisierten Geräteregistrierung (ehemals DEP) registriert wurden.",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Geräteregistrierung und automatische Geräteregistrierung",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Geräteregistrierung und automatische Geräteregistrierung",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Konfigurieren Sie Microsoft Launcher auf Ihren vollständig verwalteten Geräten.",
+ "deviceExperienceTypeDescription": "Wählen Sie basierend auf der zu konfigurierenden Benutzeroberfläche den Kioskmodus oder Microsoft Launcher aus, um mit der Konfiguration der Benutzeroberfläche auf Ihren Geräten zu beginnen. Wenn Sie keinen Geräteerfahrungstyp auswählen, wird Benutzer*innen die standardmäßige Startseite des Geräts angezeigt.",
+ "deviceExperienceTypeKioskMode": "Kioskmodus (dediziert und vollständig verwaltet)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Verwenden Sie Microsoft Launcher, um die Benutzeroberfläche des Startbildschirms auf den verwalteten Geräten Ihrer Organisation anzupassen. Wenn Sie Launcher als Standard festlegen, können Gerätebenutzer kein anderes Startprogramm verwenden.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Microsoft Launcher als Standardstartprogramm festlegen",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft-Startprogramm (nur vollständig verwaltet)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Benutzer können das Hintergrundbild nur ändern, wenn Sie es zulassen. Diese Einstellung ist nur verfügbar, wenn Sie ein benutzerdefiniertes Hintergrundbild konfigurieren.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Benutzern das Ändern des Hintergrundbilds erlauben",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Hiermit können Sie ein eigenes Bild als Hintergrundbild für den Startbildschirm anwenden und festlegen, ob es vom Benutzer geändert werden kann. Wenn Sie kein benutzerdefiniertes Hintergrundbild konfigurieren, wird das aktuelle Hintergrundbild des Geräts beibehalten.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Benutzerdefiniertes Hintergrundbild konfigurieren",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Dieses Bild wird als Hintergrundbild auf dem Startbildschirm des Geräts angezeigt. Dieses Feld ist nur verfügbar, wenn Sie ein benutzerdefiniertes Hintergrundbild konfigurieren.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "URL des Hintergrundbilds eingeben",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Deaktiviert",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Ausblenden",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Anzeigen",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Wenn Sie dem Benutzer das Ändern der Dockanzeige gestatten, wird die vorherige Einstellung für die anfängliche Bereitstellung erzwungen. Für nachfolgende Bereitstellungen wird die Einstellung nicht erzwungen, um Änderungen zu berücksichtigen, die der Benutzer möglicherweise vorgenommen hat. Diese Einstellung ist nur verfügbar, wenn Sie die Dockanzeige konfigurieren.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Benutzern das Ändern der Dockanzeige erlauben",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Das Dock ist ein Menü, in dem Gerätebenutzer schnell auf ihre Apps und Tools zugreifen können. Wenn es ausgeblendet ist, müssen Benutzer nach oben wischen, um darauf zuzugreifen.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dockanzeige",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Wenn Sie dem Benutzer das Aktivieren/Deaktivieren des Feeds gestatten, wird die vorherige Einstellung für die anfängliche Bereitstellung erzwungen. Für nachfolgende Bereitstellungen wird die Einstellung nicht erzwungen, um Änderungen zu berücksichtigen, die der Benutzer möglicherweise vorgenommen hat. Diese Einstellung ist nur verfügbar, wenn Sie den Launcher-Feed aktivieren.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Benutzern das Aktivieren/Deaktivieren des Feeds erlauben",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Der Feed ist ein zusätzlicher Bildschirm auf der rechten Seite des Startbildschirms, in dem Gerätebenutzer auf ihre Kalender, Dokumente und aktuellen Aktivitäten zugreifen können. Wenn Sie diese Option nicht aktivieren, bleibt sie deaktiviert. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Launcher-Feed aktivieren",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Platzierung der Suchleiste",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Unten",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Ausblenden",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Nach oben",
+ "deviceExperienceTypeName": "Geräteerfahrungstyp",
"deviceGuardCredentialGuardDescription": "Durch die Aktivierung mit UEFI-Sperre wird sichergestellt, dass Credential Guard nicht remote deaktiviert werden kann. Bei Aktivierung ohne UEFI-Sperre kann Credential Guard remote über die Gruppenrichtlinie deaktiviert werden.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune-Geräte-ID",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Anzahl von Tagen vor dem Übergang von automatischen Neustarts, die außerhalb der Nutzungszeiten geplant sind, zum erzwungenen Neustart, den der Benutzer planen muss.",
"engagedRestartTransitionScheduleName": "Übergang von Benutzern nach einem automatischen Neustart zum erzwungenen Neustart (Tage)",
"enhancedOption": "Erweitert (1903 und früher)",
- "enrollmentProfileTypeDedicatedDevice": "Dediziertes Gerät",
- "enrollmentProfileTypeDescription": "Wählen Sie einen Registrierungsprofiltyp aus, um mit der Konfiguration von Microsoft Launcher oder Microsoft Managed Home Screen auf Ihren Geräten zu beginnen. Wenn Sie keinen Profiltyp auswählen, wird den Benutzern der Standardstartbildschirm des Geräts angezeigt.",
- "enrollmentProfileTypeFullyManaged": "Vollständig verwaltet",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Konfigurieren Sie Microsoft Launcher auf Ihren vollständig verwalteten Geräten.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Verwenden Sie Microsoft Launcher, um die Benutzeroberfläche des Startbildschirms auf den verwalteten Geräten Ihrer Organisation anzupassen. Wenn Sie Launcher als Standard festlegen, können Gerätebenutzer kein anderes Startprogramm verwenden.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Microsoft Launcher als Standardstartprogramm festlegen",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Benutzern das Ändern des Hintergrundbilds erlauben",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Hiermit können Sie ein eigenes Bild als Hintergrundbild für den Startbildschirm anwenden und festlegen, ob es vom Benutzer geändert werden kann. Wenn Sie kein benutzerdefiniertes Hintergrundbild konfigurieren, wird das aktuelle Hintergrundbild des Geräts beibehalten.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Benutzerdefiniertes Hintergrundbild konfigurieren",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Dieses Bild wird als Hintergrundbild auf dem Startbildschirm des Geräts angezeigt. Dieses Feld ist nur verfügbar, wenn Sie ein benutzerdefiniertes Hintergrundbild konfigurieren.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "URL des Hintergrundbilds eingeben",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Deaktiviert",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Ausblenden",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Anzeigen",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Das Dock ist ein Menü, in dem Gerätebenutzer schnell auf ihre Apps und Tools zugreifen können. Wenn es ausgeblendet ist, müssen Benutzer nach oben wischen, um darauf zuzugreifen.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dockanzeige",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Benutzern das Aktivieren/Deaktivieren des Feeds erlauben",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Der Feed ist ein zusätzlicher Bildschirm auf der rechten Seite des Startbildschirms, in dem Gerätebenutzer auf ihre Kalender, Dokumente und aktuellen Aktivitäten zugreifen können. Wenn Sie diese Option nicht aktivieren, bleibt sie deaktiviert. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Launcher-Feed aktivieren",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Platzierung der Suchleiste",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Unten",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Ausblenden",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Oben",
- "enrollmentProfileTypeName": "Registrierungsprofiltyp",
"enrollmentSettingsHeading": "Registrierungseinstellungen",
"enterOnlyOneForDns": "Geben Sie eine Liste mit DNS-Servern und/oder einen Proxyserver an.",
"enterpriseModeLoggingExample": "z. B. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Vollständig verwaltete und unternehmenseigene Arbeitsprofilgeräte",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Diese Einstellungen funktionieren nur für vollständig verwaltete und dedizierte Geräte.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Vollständig verwaltete und dedizierte Geräte",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Diese Einstellungen funktionieren nur für vollständig verwaltete und dedizierte Geräte, die mit einer Kioskrichtlinie betrieben werden.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Vollständig verwaltete und dedizierte Geräte (nur Kioskmodus)",
"gameCenterBlockedMacDescription": "\"Ja\" deaktiviert Game Center, und das Symbol \"Game Center\" wird vom Startbildschirm entfernt. Verfügbar für Geräte, auf denen macOS-Versionen 10.13 oder höher ausgeführt werden.",
"gameCenterBlockedMacName": "Game Center blockieren",
"gamingPageDescription": "Hiermit blockieren Sie den Zugriff auf Gaming in der App \"Einstellungen\".",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Hiermit wird der Anmeldetyp für den Zugriff auf die Anwendungen für dieses Kioskgerät konfiguriert.",
"kioskShowTaskbarDesc": "Hiermit wird die Windows-Taskleiste für den Kiosk angezeigt oder ausgeblendet.",
"kioskShowTaskbarName": "Windows-Taskleiste",
+ "kioskSingleInfoBoxText": "Einzel-App-Kioskmodus: Sperrt das Gerät, um die ausgewählte App auszuführen. Um diesen Modus zu verwenden, müssen Sie zuerst die ausgewählte App aus der Client-Apps-Workload genehmigen und zuweisen. Auf vollständig verwalteten Geräten ist Managed Home Screen die einzige ausgewählte App, die angewendet wird. Alle anderen Apps werden stattdessen als erforderliche App behandelt.",
"kioskStartDateTime": "Startzeit des Wartungsfensters",
"kioskStartMenuLayoutXmlDesc": "Hiermit stellen Sie ein XML-Layout bereit, das definiert, in welcher Reihenfolge Apps im Startmenü angezeigt werden sollen.",
"kioskStartMenuLayoutXmlDescV2": "Durch das Importieren einer XML-Datei zum Konfigurieren des Startlayouts werden die aktuellen Einstellungen für die Anzeigereihenfolge und die Kachelgröße überschrieben. Weitere Informationen",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Muss ein gültiger Dateipfad sein.",
"mustBeAValidHttpsUrl": "Muss eine gültige HTTPS-URL sein.",
"mustBeAValidIPAddress": "Muss eine gültige IP-Adresse sein (Beispiel: 192.168.0.1 oder 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Der Wert muss eine gültige IP-Adresse oder ein gültiger FQDN mit optionaler Portnummer sein.",
"mustBeAValidIPv4Address": "Muss eine gültige IPv4-Adresse sein (z. B. 192.168.0.1).",
"mustBeAValidIPv6Address": "Muss eine gültige IPv6-Adresse sein (Beispiel: 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Muss eine gültige Bild-URL sein, z. B. www.contoso.com/image.jpg.",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Windows-Firewallregeln aus dem lokalen Speicher (öffentliche Netzwerke)",
"publicNetworkName": "Öffentliches Netzwerk (nicht sichtbar)",
"publicOutboundConnectionsSummaryLabel": "Standardaktion für ausgehende Verbindungen (öffentliche Netzwerke)",
- "publicPlayStoreEnabledDescription": "Benutzer erhalten Zugriff auf alle Apps mit Ausnahme derjenigen, deren Deinstallation Sie in \"Client-Apps\" angefordert haben. Wenn Sie für diese Einstellung \"Nicht konfiguriert\" auswählen, können Benutzer nur auf die Apps zugreifen, die Sie in \"Client-Apps\" als verfügbar oder erforderlich aufgeführt haben.",
+ "publicPlayStoreEnabledDescription": "Wenn Sie „Zulassen“ auswählen, erhalten Benutzer Zugriff auf alle Apps, mit Ausnahme der Apps, die Sie in Client-Apps deinstallieren müssen. Wenn Sie für diese Einstellung „Blockieren“ oder „Nicht konfiguriert“ auswählen, können Benutzer nur auf die Apps zugreifen, die Sie in Client-Apps als verfügbar oder erforderlich aufgeführt haben.",
"publicPlayStoreEnabledName": "Zugriff auf alle Apps im Google Play Store zulassen",
- "publicPlayStoreEnabledWarning": "Wenn Sie „Zulassen“ auswählen, können Benutzer alle Apps aus dem Google Play Store installieren. Wenn Sie später Ihre Auswahl auf „Nicht konfiguriert“ ändern, werden alle Apps, die nicht ausdrücklich für den Benutzer zugelassen sind, vom Gerät entfernt.",
+ "publicPlayStoreEnabledWarning": "Wenn Sie „Zulassen“ auswählen, können Benutzer alle Apps aus dem Google Play Store installieren. Wenn Sie Ihre Auswahl später in „Blockieren“ oder „Nicht konfiguriert“ ändern, werden alle Apps vom Gerät entfernt, mit Ausnahme von Apps, die Sie in Client-Apps als verfügbar oder erforderlich aufgeführt haben.",
+ "publicPlayStoreSelectionAllowList": "Blockieren",
+ "publicPlayStoreSelectionBlockList": "Zulassen",
+ "publicPlayStoreSelectionNotConfigured": "Nicht konfiguriert",
"publicShieldedSummaryLabel": "Abgeschirmt (öffentliche Netzwerke)",
"publicStealthModeSummaryLabel": "Geschützter Modus (öffentliche Netzwerke)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Unicastantworten auf Multicastbroadcasts (öffentliche Netzwerke)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Wird gelöscht...",
"photoLibrary": "Fotos-Mediathek",
"pinCharSettingTooltip": "Eine numerische PIN darf nur numerische Zeichen enthalten.\r\n\r\nEin Passcode muss sowohl alphanumerische Zeichen als auch zulässige Symbole enthalten.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Wichtig: Am 1. Juni 2024 erhalten Apps mit einem SDK, das älter als 17.7.0 ist, keine App-Schutzrichtlinienupdates mehr, und Benutzer werden am Starten der App gehindert. Stellen Sie sicher, dass Benutzer ihre Apps aktualisieren und Ihre Branchen-Apps ein aktuelles SDK oder Wrapper verwenden. Weitere Informationen",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Plattform",
"platformDropDownLabel": "Plattform",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Gerät",
"licenseTypeUser": "Benutzer"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Eigenschaft",
- "rule": "Regel",
- "ruleDetails": "Regeldetails",
- "value": "Wert"
- },
- "assignIf": "Profil in folgenden Fällen zuweisen",
- "deleteWarning": "Hierdurch wird die ausgewählte Anwendbarkeitsregel gelöscht.",
- "dontAssignIf": "Profil in folgenden Fällen nicht zuweisen",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "und {0} weitere",
- "instructions": "Geben Sie an, wie dieses Profil innerhalb einer zugewiesenen Gruppe angewendet werden soll. Intune wendet das Profil nur auf Geräte an, die die kombinierten Kriterien dieser Regeln erfüllen.",
- "maxText": "Max.",
- "minText": "Min.",
- "noActionRow": "Keine Anwendbarkeitsregeln angegeben.",
- "oSVersion": "Beispiel: 1.2.3.4",
- "toText": "bis",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home (China)",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home (Einzelsprache)",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "Betriebssystemedition",
- "windows10OsVersion": "Betriebssystemversion",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Ist gleich",
- "greaterThan": "Größer als",
- "greaterThanOrEqualTo": "Größer oder gleich",
- "lessThan": "Kleiner als",
- "lessThanOrEqualTo": "Kleiner oder gleich",
- "notEqualTo": "Ungleich"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Überprüfung der Skriptsignatur erzwingen und Skript unbeaufsichtigt ausführen",
- "enforceSignatureCheckTooltip": "Wählen Sie \"Ja\", um sicherzustellen, dass das Skript von einem vertrauenswürdigen Herausgeber signiert ist, damit das Skript ohne Warnungen oder Anzeige von Benutzeraufforderungen ausgeführt werden kann. Das Skript wird ohne Blockierung ausgeführt. Wählen Sie \"Nein\" (Standardeinstellung) aus, um das Skript mit Benutzerbestätigung ohne Signaturüberprüfung auszuführen.",
- "header": "Benutzerdefiniertes Skript für die Erkennung verwenden",
- "runAs32Bit": "Skript auf 64-Bit-Clients als 32-Bit-Prozess ausführen",
- "runAs32BitTooltip": "Wählen Sie \"Ja\", um das Skript auf 64-Bit-Clients in einem 32-Bit-Prozess auszuführen. Wählen Sie \"Nein\" (Standardeinstellung) aus, um das Skript auf 64-Bit-Clients in einem 64-Bit-Prozess auszuführen. 32-Bit-Clients führen das Skript in einem 32-Bit-Prozess aus.",
- "scriptContent": "Skriptinhalt",
- "scriptFile": "Skriptdatei",
- "scriptFileNotSelectedValidation": "Keine Skriptdatei ausgewählt.",
- "scriptFileTooltip": "Wählen Sie ein PowerShell-Skript aus, mit dem das Vorhandensein der App auf dem Client erkannt wird. Die App wird erkannt, wenn das Skript den Wert 0 als Exitcode zurückgibt und einen Zeichenfolgenwert in STDOUT schreibt.",
- "scriptSizeLimitValidation": "Ihr Erkennungsskript überschreitet die maximal zulässige Größe. Beheben Sie dies, indem Sie die Größe Ihres Erkennungsskripts verringern."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Erstellungsdatum",
- "dateModified": "Änderungsdatum",
- "doesNotExist": "Datei oder Ordner nicht vorhanden.",
- "fileOrFolderExists": "Datei oder Ordner ist vorhanden",
- "sizeInMB": "Größe in MB",
- "version": "Zeichenfolge (Version)"
- },
- "associatedWith32Bit": "Auf 64-Bit-Clients einer 32-Bit-App zugeordnet",
- "associatedWith32BitTooltip": "Wählen Sie \"Ja\", um Pfadumgebungsvariablen auf 64-Bit-Clients im 32-Bit-Kontext zu erweitern. Wählen Sie \"Nein\" (Standardeinstellung) aus, um Pfadvariablen auf 64-Bit-Clients im 64-Bit-Kontext zu erweitern. 32-Bit-Clients verwenden immer den 32-Bit-Kontext.",
- "detectionMethod": "Erkennungsmethode",
- "detectionMethodTooltip": "Wählen Sie den Typ der Erkennungsmethode aus, um das Vorhandensein der App zu überprüfen.",
- "fileOrFolder": "Datei oder Ordner",
- "fileOrFolderToolTip": "Die Datei oder der Ordner für die Erkennung.",
- "operator": "Operator",
- "operatorTooltip": "Wählen Sie den Operator für die Erkennungsmethode zum Überprüfen des Vergleichs aus.",
- "path": "Pfad",
- "pathTooltip": "Der vollständige Pfad des Ordners, der die Datei oder den Order für die Ermittlung enthält.",
- "value": "Wert",
- "valueTooltip": "Wählen Sie einen Wert aus, der der ausgewählten Erkennungsmethode entspricht. Datumserkennungsmethoden müssen in lokaler Zeit eingegeben werden."
- },
- "GridColumns": {
- "pathOrCode": "Pfad/Code",
- "type": "Typ"
- },
- "MsiRule": {
- "operator": "Operator",
- "operatorTooltip": "Wählen Sie den Operator für den Vergleich zur MSI-Produktversionsüberprüfung aus.",
- "productCode": "MSI-Produktcode",
- "productCodeTooltip": "Ein gültiger MSI-Produktcode für die App.",
- "productVersion": "Wert",
- "productVersionCheck": "Überprüfung der MSI-Produktversion",
- "productVersionCheckTooltip": "Wählen Sie \"Ja\", um zusätzlich zum MSI-Produktcode die MSI-Produktversion zu überprüfen.",
- "productVersionTooltip": "Geben Sie die MSI-Produktversion für die App ein."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Ganzzahlenvergleich",
- "keyDoesNotExist": "Schlüssel nicht vorhanden",
- "keyExists": "Schlüssel vorhanden",
- "stringComparison": "Zeichenfolgenvergleich",
- "valueDoesNotExist": "Wert nicht vorhanden",
- "valueExists": "Wert vorhanden",
- "versionComparison": "Versionsvergleich"
- },
- "associatedWith32Bit": "Auf 64-Bit-Clients einer 32-Bit-App zugeordnet",
- "associatedWith32BitTooltip": "Wählen Sie \"Ja\", um auf 64-Bit-Clients die 32-Bit-Registrierung zu durchsuchen. Wählen Sie \"Nein\" (Standardeinstellung) aus, um auf 64-Bit-Clients die 64-Bit-Registrierung zu durchsuchen. 32-Bit-Clients durchsuchen immer die 32-Bit-Registrierung.",
- "detectionMethod": "Erkennungsmethode",
- "detectionMethodTooltip": "Wählen Sie den Typ der Erkennungsmethode aus, um das Vorhandensein der App zu überprüfen.",
- "keyPath": "Schlüsselpfad",
- "keyPathTooltip": "Der vollständige Pfad des Registrierungseintrags mit dem Wert, der erkannt werden soll.",
- "operator": "Operator",
- "operatorTooltip": "Wählen Sie den Operator für die Erkennungsmethode zum Überprüfen des Vergleichs aus.",
- "value": "Wert",
- "valueName": "Wertname",
- "valueNameTooltip": "Der Name des Registrierungswerts, der erkannt werden soll.",
- "valueTooltip": "Wählen Sie einen Wert aus, der mit der ausgewählten Erkennungsmethode übereinstimmt."
- },
- "RuleTypeOptions": {
- "file": "Datei",
- "mSI": "MSI",
- "registry": "Registrierung"
- },
- "gridAriaLabel": "Erkennungsregeln",
- "header": "Erstellen Sie eine Regel, die das Vorhandensein dieser App anzeigt.",
- "noRulesSelectedPlaceholder": "Keine Regeln angegeben.",
- "ruleTableLimit": "Sie können bis zu 25 Erkennungsregeln hinzufügen.",
- "ruleType": "Regeltyp",
- "ruleTypeTooltip": "Wählen Sie den Typ der hinzuzufügenden Erkennungsregel aus."
- },
- "RuleConfigurationOptions": {
- "customScript": "Benutzerdefiniertes Skript für die Erkennung verwenden",
- "manual": "Erkennungsregeln manuell konfigurieren"
- },
- "bladeTitle": "Erkennungsregeln",
- "header": "Konfigurieren Sie App-spezifische Regeln zum Erkennen des Vorhandenseins der App.",
- "rulesFormat": "Regelformat",
- "rulesFormatTooltip": "Konfigurieren Sie die Erkennungsregeln entweder manuell, oder verwenden Sie ein benutzerdefiniertes Skript, um das Vorhandensein der App zu erkennen.",
- "selectorLabel": "Erkennungsregeln"
+ "BooleanActions": {
+ "allow": "Erteilen Sie",
+ "block": "Blockieren",
+ "configured": "Konfiguriert",
+ "disable": "Deaktivieren",
+ "dontRequire": "Nicht anfordern",
+ "enable": "Aktivieren",
+ "hide": "Ausblenden",
+ "limit": "Limit",
+ "notConfigured": "Nicht konfiguriert",
+ "require": "Anfordern",
+ "show": "Anzeigen",
+ "yes": "Ja"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Von der Microsoft Edge-App empfohlene SmartScreen-Einstellungen: Windows 10 in der Cloudkonfigurationsvorlage. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Endpunkterkennung und -antwort"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "App- und Browserisolierung",
- "aSRApplicationControl": "Anwendungssteuerung",
- "aSRAttackSurfaceReduction": "Regeln zur Verringerung der Angriffsfläche",
- "aSRDeviceControl": "Gerätesteuerung",
- "aSRExploitProtection": "Exploit-Schutz",
- "aSRWebProtection": "Webschutz (Microsoft Edge-Legacyversion)",
- "aVExclusions": "Microsoft Defender Antivirus-Ausschlüsse",
- "antivirus": "Microsoft Defender Antivirus",
- "cloudPC": "Windows 365-Sicherheitsbaseline",
- "default": "Endpunktsicherheit",
- "defenderTest": "Microsoft Defender für Endpunkt-Demo",
- "diskEncryption": "BitLocker",
- "eDR": "Endpunkterkennung und -antwort",
- "edgeSecurityBaseline": "Microsoft Edge-Baseline",
- "edgeSecurityBaselinePreview": "Vorschau: Microsoft Edge-Baseline",
- "editionUpgradeConfiguration": "Editionsupgrade und Moduswechsel",
- "firewall": "Windows-Firewall",
- "firewallRules": "Windows-Firewallregeln",
- "identityProtection": "Kontoschutz",
- "identityProtectionPreview": "Kontoschutz (Vorschau)",
- "mDMSecurityBaseline1810": "MDM-Sicherheitsbaseline für Windows 10 und höher für Oktober 2018",
- "mDMSecurityBaseline1810Preview": "Vorschau: MDM-Sicherheitsbaseline für Windows 10 und höher für Oktober 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Vorschau: MDM-Sicherheitsbaseline für Windows 10 für Oktober 2018 (Beta)",
- "mDMSecurityBaseline1906": "MDM-Sicherheitsbaseline für Windows 10 und höher für Mai 2019",
- "mDMSecurityBaseline2004": "MDM-Sicherheitsbaseline für Windows 10 und höher für August 2020",
- "mDMSecurityBaseline2101": "MDM-Sicherheitsbaseline für Windows 10 und höher Dezember 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS-Firewall",
- "microsoftDefenderBaseline": "Microsoft Defender für Endpunkt-Baseline",
- "office365Baseline": "Microsoft Office O365-Baseline",
- "office365BaselinePreview": "Vorschau: Microsoft Office O365-Baseline",
- "securityBaselines": "Sicherheitsbaselines",
- "test": "Testvorlage",
- "testFirewallRulesSecurityTemplateName": "Windows-Firewallregeln (Test)",
- "testIdentityProtectionSecurityTemplateName": "Kontoschutz (Test)",
- "windowsSecurityExperience": "Windows-Sicherheitsfunktionalität"
- },
- "Firewall": {
- "mDE": "Windows-Firewall"
- },
- "FirewallRules": {
- "mDE": "Windows-Firewallregeln"
- },
- "OneDriveKnownFolderMove": {
- "description": "OneDrive-Einstellungen für die Verschiebung bekannter Ordner: Windows 10 in der Cloudkonfigurationsvorlage. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Kontoschutz",
- "administrativeTemplates": "Administrative Vorlagen",
- "androidCompliancePolicy": "Android-Kompatibilitätsrichtlinie",
- "aospDeviceOwnerCompliancePolicy": "Android-Konformitätsrichtlinie (AOSP)",
- "applicationControl": "App Control for Business",
- "attackSurfaceReductionRules": "Regeln zur Verringerung der Angriffsfläche",
- "bitlocker": "BitLocker",
- "custom": "Benutzerdefiniert",
- "deliveryOptimization": "Übermittlungsoptimierung",
- "derivedPersonalIdentityVerificationCredential": "Abgeleitete Anmeldeinformation",
- "deviceControl": "Gerätesteuerung",
- "deviceFeatures": "Gerätefunktionen",
- "deviceFirmwareConfigurationInterface": "Schnittstelle zur Konfiguration der Gerätefirmware",
- "deviceLock": "Gerätesperre",
- "deviceOwner": "Vollständig verwaltetes, dediziertes und unternehmenseigenes Arbeitsprofil",
- "deviceRestrictions": "Geräteeinschränkungen",
- "deviceRestrictionsWindows10Team": "Geräteeinschränkungen (Windows 10 Team)",
- "domainJoinPreview": "Domänenbeitritt",
- "editionUpgradeAndModeSwitch": "Editionsupgrade und Moduswechsel",
- "education": "Bildung",
- "email": "E-Mail",
- "emailSamsungKnoxOnly": "E-Mail (nur Samsung KNOX)",
- "endpointProtection": "Endpoint Protection",
- "expeditedCheckin": "Konfiguration der Verwaltung mobiler Geräte",
- "exploitProtection": "Exploit-Schutz",
- "extensions": "Erweiterungen",
- "hardwareConfigurations": "BIOS-Konfigurationen und andere Einstellungen",
- "identityProtection": "Identity Protection",
- "iosCompliancePolicy": "iOS-Konformitätsrichtlinie",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Lokale Benutzergruppenmitgliedschaft",
- "macCompliancePolicy": "Mac-Kompatibilitätsrichtlinie",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Sicherheitsbaseline für Microsoft 365 Apps for Enterprise",
- "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus-Ausschlüsse",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender für Endpunkt (Desktopgeräte, auf denen Windows 10 oder höher ausgeführt wird)",
- "microsoftDefenderFirewallRules": "Windows-Firewallregeln",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Sicherheitsbaseline für Microsoft Edge",
- "mxProfileZebraOnly": "MX-Profil (nur Zebra)",
- "networkBoundary": "Netzwerkgrenze",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Gruppenrichtlinie außer Kraft setzen",
- "pkcsCertificate": "PKCS-Zertifikat",
- "pkcsImportedCertificate": "Importiertes PKCS-Zertifikat",
- "preferenceFile": "Einstellungsdatei",
- "presets": "Voreinstellungen",
- "scepCertificate": "SCEP-Zertifikat",
- "secureAssessmentEducation": "Sicheres Assessment (Education)",
- "securityBaselineForHololens2Advanced": "Erweiterte Sicherheitsbaseline für HoloLens 2",
- "securityBaselineForHololens2Standard": "Standardsicherheitsbaseline für HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Sicherheitsbaseline für Microsoft Edge",
- "settingsCatalog": "Einstellungskatalog",
- "sharedMultiUserDevice": "Freigegebenes, von mehreren Benutzern verwendetes Gerät",
- "softwareUpdates": "Softwareupdates",
- "trustedCertificate": "Vertrauenswürdiges Zertifikat",
- "unknown": "Unbekannt",
- "unsupported": "Nicht unterstützt",
- "vpn": "VPN",
- "wiFi": "WLAN",
- "wiFiImport": "WLAN (Import)",
- "windows10CompliancePolicy": "Windows 10/11-Konformitätsrichtlinie",
- "windows10MobileCompliancePolicy": "Windows 10 Mobile-Kompatibilitätsrichtlinie",
- "windows10XScep": "SCEP-Zertifikat: TEST",
- "windows10XTrustedCertificate": "Vertrauenswürdiges Zertifikat: TEST",
- "windows10XVPN": "VPN: TEST",
- "windows10XWifi": "WLAN: TEST",
- "windows11SecurityBaseline": "Sicherheitsbaseline für Windows 10 und höher",
- "windows365SecurityBaseline": "Windows 365-Sicherheitsbaseline",
- "windows8CompliancePolicy": "Windows 8-Kompatibilitätsrichtlinie",
- "windowsHealthMonitoring": "Windows-Integritätsüberwachung",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Windows Phone-Kompatibilitätsrichtlinie",
- "windowsUpdateforBusiness": "Windows Update for Business",
- "wiredNetwork": "Kabelgebundenes Netzwerk",
- "workProfile": "Arbeitsprofil \"Persönliches Eigentum\""
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Update schrittweise verfügbar machen",
- "immediateStart": "Update so bald wie möglich verfügbar machen",
- "startDateOnly": "Update an einem bestimmten Datum verfügbar machen"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Verwaltete Geräte",
- "devicesWithoutEnrollment": "Verwaltete Apps"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filter",
- "assignmentFilterTypeColumnHeader": "Filtermodus",
- "assignmentToast": "Endbenutzerbenachrichtigungen",
- "assignmentTypeTableHeader": "ZUWEISUNGSTYP",
- "autoUpdate": "Automatische Aktualisierung",
- "deadlineTimeColumnLabel": "Installationsstichtag",
- "deliveryOptimizationPriorityHeader": "Priorität der Übermittlungsoptimierung",
- "groupTableHeader": "Gruppe",
- "installContextLabel": "Installationskontext",
- "isRemovable": "Als entfernbare App installieren",
- "licenseTypeLabel": "Lizenztyp",
- "modeTableHeader": "Gruppenmodus",
- "policySet": "Richtliniensatz",
- "preventAutoAppUpdate": "Automatische App-Updates verhindern",
- "preventManagedAppBackup": "iCloud-App-Sicherung verhindern",
- "restartGracePeriodHeader": "Kulanzzeitraum neu starten",
- "startTimeColumnLabel": "Verfügbarkeit",
- "tracks": "Nachverfolgungen",
- "uninstallOnRemoval": "Bei Entfernung des Geräts deinstallieren",
- "updateMode": "Updatepriorität",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD-Web-App",
- "androidEnterpriseSystemApp": "Android Enterprise-System-App",
- "androidForWorkApp": "Verwaltete Google Play Store-App",
- "androidLobApp": "Branchenspezifische Android-App",
- "androidStoreApp": "Android Store-App",
- "builtInAndroid": "Integrierte Android-App",
- "builtInApp": "Integrierte App",
- "builtInIos": "Integrierte iOS-App",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "Branchenspezifische iOS-App",
- "iosStoreApp": "iOS Store-App",
- "iosVppApp": "iOS Volume Purchase Program-App",
- "lineOfBusinessApp": "Branchenspezifische App",
- "macOSDmgApp": "macOS-App (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Branchenspezifische macOS-App",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office Suite",
- "macOSPkgApp": "macOS-App (PKG)",
- "macOSWebClip": "macOS-Webclip",
- "macOsVppApp": "macOS-Volume Purchase Program-App",
- "managedAndroidLobApp": "Verwaltete branchenspezifische Android-App",
- "managedAndroidStoreApp": "Verwaltete Android Store-App",
- "managedGooglePlayApp": "Verwaltete Google Play Store-App",
- "managedGooglePlayPrivateApp": "Private verwaltete Google Play-App",
- "managedGooglePlayWebApp": "Weblink für verwaltetes Google Play",
- "managedIosLobApp": "Verwaltete branchenspezifische iOS-App",
- "managedIosStoreApp": "Verwaltete iOS Store-App",
- "microsoftStoreForBusinessApp": "Microsoft Store für Unternehmen-App",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store für Unternehmen",
- "officeAddIn": "Office-Add-In",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 und höher)",
- "sharePointApp": "SharePoint-App",
- "teamsApp": "Teams-App",
- "webApp": "Weblink",
- "win32CatalogApp": "Windows-Katalog-App (Win32)",
- "winGetPublicApp": "Community-Repository des Windows-Paket-Managers",
- "winGetStoreApp": "Microsoft Store-App (neu)",
- "windowsAppXLobApp": "Branchenspezifische Windows-APPX-App",
- "windowsClassicApp": "Windows-App (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 und höher)",
- "windowsMobileMsiLobApp": "Branchenspezifische Windows MSI-App",
- "windowsPhone81AppXBundleLobApp": "Branchenspezifische Windows Phone 8.1-APPX-App",
- "windowsPhone81AppXLobApp": "Branchenspezifische Windows Phone 8.1-APPX-App",
- "windowsPhone81StoreApp": "Windows Phone 8.1 Store-App",
- "windowsPhoneXapLobApp": "Branchenspezifische Windows Phone-XAP-App",
- "windowsStoreApp": "Microsoft Store-App (Legacy)",
- "windowsUniversalAppXLobApp": "Branchenspezifische Windows Universal-APPX-App",
- "windowsUniversalLobApp": "Branchenspezifische Windows Universal-App",
- "windowsWebApp": "Windows-Weblink"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Ausgeschlossen",
- "include": "Enthalten",
- "includeAllDevicesVirtualGroup": "Enthalten",
- "includeAllUsersVirtualGroup": "Enthalten"
- },
- "AssignmentToast": {
- "hideAll": "Alle Popupbenachrichtigungen ausblenden",
- "showAll": "Alle Popupbenachrichtigungen anzeigen",
- "showReboot": "Popupbenachrichtigungen für Computerneustarts anzeigen"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Ja",
- "notConfigured": "Nein"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Hintergrund",
- "displayText": "Inhaltsdownload in {0}",
- "foreground": "Vordergrund",
- "header": "Priorität der Übermittlungsoptimierung"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "App-Installation kann einen Geräteneustart erzwingen",
- "basedOnReturnCode": "Verhalten auf Grundlage von Rückgabecodes bestimmen",
- "force": "Intune erzwingt einen verbindlichen Geräteneustart",
- "suppress": "Keine bestimmte Aktion"
- },
- "FilterType": {
- "exclude": "Ausschließen",
- "include": "Einschließen",
- "none": "Keine"
- },
- "InstallIntent": {
- "available": "Für registrierte Geräte verfügbar",
- "availableWithoutEnrollment": "Verfügbar mit oder ohne Registrierung",
- "notApplicable": "Nicht zutreffend",
- "required": "Erforderlich",
- "uninstall": "Deinstallieren"
- },
- "SettingType": {
- "assignmentType": "Zuweisungstyp",
- "deviceLicensing": "Lizenztyp",
- "installContext": "Bei Entfernung des Geräts deinstallieren",
- "toastSettings": "Endbenutzerbenachrichtigungen",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Standard",
- "postponed": "Zurückgestellt",
- "priority": "Hohe Priorität"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Konfigurieren Sie Geräte für die erste Bereitstellung.",
- "title": "Gerätevorbereitung"
- },
- "EnrollmentSettings": {
- "description": "Konfigurieren Sie Registrierungseinstellungen wie das Blockieren der Registrierung und das Zuweisen zu Benutzern.",
- "title": "Registrierungseinstellungen"
- },
- "OSConfiguration": {
- "menuDescription": "Konfigurieren Sie Einstellungen, mit denen Benutzer Windows von einem startbaren Flashlaufwerk wiederherstellen können.",
- "menuTitle": "Konfiguration der Wiederherstellung des Windows-Betriebssystems"
- },
- "coManagementAuthorityDesc": "Hiermit werden Co-Verwaltungseinstellungen für die Configuration Manager-Integration konfiguriert.",
- "coManagementAuthorityTitle": "Einstellungen für die Co-Verwaltung",
- "deploymentProfiles": "Windows AutoPilot Deployment-Profile",
- "description": "Erfahren Sie mehr über die sieben verschiedenen Möglichkeiten, wie ein Windows 10/11-PC von Benutzern oder Administratoren bei Intune registriert werden kann.",
- "descriptionLabel": "Windows-Registrierungsmethoden",
- "enrollmentStatusPage": "Seite \"Registrierungsstatus\""
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Alle empfohlenen Treiberupdates automatisch genehmigen",
- "manual": "Manuelles Genehmigen und Bereitstellen von Treiberupdates"
- },
- "BulkActions": {
- "button": "Massenvorgänge"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Genehmigungsmethode:"
- },
- "DeploymentDeferralInDays": {
- "label": "Updates verfügbar machen nach",
- "units": "(Tage)",
- "value": "{0} Tage"
- },
- "DriverAction": {
- "header": "Wählen Sie unten eine Aktion aus.",
- "label": "Treiberaktion",
- "placeholder": "Aktion auswählen"
- },
- "IncludedDrivers": {
- "label": "Eingeschlossene Treiber"
- },
- "SelectDrivers": {
- "header": "Treiber auswählen, die in die Massenaktion einbezogen werden sollen"
- },
- "SelectDriversToInclude": {
- "button": "Einzuschließende Treiber auswählen"
- },
- "SelectLessDrivers": {
- "validation": "Es können höchstens einhundert Treiber ausgewählt werden"
- },
- "SelectMoreDrivers": {
- "validation": "Mindestens ein Treiber muss ausgewählt werden."
- },
- "SelectedDrivers": {
- "label": "Ausgewählte Treiber"
- },
- "availabilityDate": "In Windows Update verfügbar machen",
- "bladeTitle": "Treiberupdates Windows 10 und höher (Vorschau)",
- "lastSync": "Letzte Synchronisierung:",
- "lastSyncDefaultText": "Erste Inventursammlung ausstehend",
- "loadError": "Fehler beim Laden."
- },
- "DriverStatus": {
- "approved": "Genehmigt",
- "declined": "Abgelehnt",
- "export": "Empfohlene Treiber werden exportiert",
- "needsReview": "Überprüfung erforderlich",
- "paused": "Angehalten"
- },
- "DriversToReview": {
- "text": "{0} zum Überprüfen"
- },
- "Subtitle": {
- "automatic": "Richtlinie für automatische Genehmigungstreiberupdates",
- "manual": "Richtlinie für manuelle Genehmigungstreiberupdate"
- },
- "SyncNotification": {
- "failure": "{0}-Synchronisierung nicht möglich",
- "failureDescription": "Es ist ein Fehler aufgetreten, und die angeforderte Synchronisierung konnte nicht abgeschlossen werden. Versuchen Sie es noch mal.",
- "pending": "{0}-Synchronisierung wird durchgeführt",
- "pendingDescription": "Die neuesten Daten werden abgerufen. Dieser Vorgang kann einige Minuten dauern.",
- "success": "{0}-Synchronisierung abgeschlossen",
- "successDescription": "Die Synchronisierung mit dem WUfB-Dienst wurde am {0} abgeschlossen."
- },
- "SyncSpinner": {
- "text": "Eine Synchronisierung wird ausgeführt. Dies kann einige Minuten dauern. Suchen Sie nach einer Warnung, oder schauen Sie in ein paar Minuten noch einmal nach."
- },
- "TabName": {
- "basics": "Grundlagen",
- "driverUpdateSettings": "Einstellungen",
- "otherDrivers": "Andere Treiber",
- "properties": "Eigenschaften",
- "recommendedDrivers": "Empfohlene Treiber"
- },
- "driverAddFilter": "Filter hinzufügen",
- "driverApplicableDevices": "Anwendbare Geräte",
- "driverApprovalStatus": "Status",
- "driverBulkActions": "Massenvorgänge",
- "driverClass": "Treiberklasse",
- "driverCount": "Es werden die Datensätze {0} bis {1} von {2} Datensätzen angezeigt.",
- "driverFilterNoneSelected": "Nichts ausgewählt",
- "driverManufacturer": "Hersteller",
- "driverName": "Treibername",
- "driverNameLower": "Windows-Treiberupdatebereitstellung",
- "driverNameUpper": "Bereitstellung von Windows-Treiberupdates",
- "driverRefresh": "Aktualisieren",
- "driverReleaseDate": "Releasedatum",
- "driverSearch": "Suchen",
- "driverSearchKeyword": "Suchschlüsselwort eingeben",
- "driverVersion": "Version",
- "firstDeploymentDate": "Erste Bereitstellung",
- "infoBoxText": "Es kann bis zu 24 Stunden dauern, bis der Bestand aufgefüllt wird, nachdem eine Richtlinie zugewiesen und erstellt wurde.",
- "textBlockText": "Wählen Sie Ihre Richtliniengenehmigungs- und Bereitstellungseinstellungen aus. Wählen Sie aus, ob Sie eine Richtlinie einrichten möchten, um Updates automatisch oder manuell zu genehmigen und bereitzustellen. Die Genehmigungsmethode kann nicht geändert werden, nachdem eine Richtlinie erstellt wurde. Änderungen an einzelnen Treibergenehmigungen und Bereitstellungsdetails sind jedoch möglich, sobald ein Inventar für zugewiesene Geräte erstellt wurde."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Mit dieser Einstellung bleiben Sie darüber informiert, welche Benutzer Apps installieren, die nicht für die Verwendung in Ihrem Unternehmen genehmigt sind. Wählen Sie die Art der Liste für eingeschränkte Apps aus:
\r\n Verbotene Apps: Eine Liste der Apps, bei denen Sie informiert werden möchten, wenn Benutzer sie installieren. \r\n Genehmigte Apps: Eine Liste der Apps, die zur Verwendung in Ihrem Unternehmen genehmigt sind. Wenn Benutzer eine App installieren, die nicht in dieser Liste aufgeführt ist, werden Sie informiert. \r\n ",
- "androidZebraMxZebraMx": "Hiermit werden Zebra-Geräte durch das Hochladen eines MX-Profils im XML-Format konfiguriert.",
- "iosDeviceFeaturesAirprint": "Mit diesen Einstellungen konfigurieren Sie iOS-Geräte für das automatische Herstellen einer Verbindung mit AirPrint-kompatiblen Druckern in Ihrem Netzwerk. Sie benötigen die IP-Adresse und den Ressourcenpfad Ihrer Drucker.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Konfigurieren Sie eine App-Erweiterung, die einmaliges Anmelden (Single Sign-On, SSO) für Geräte mit iOS 13.0 oder höher aktiviert.",
- "iosDeviceFeaturesHomeScreenLayout": "Konfigurieren Sie das Layout für den Dock- und den Startbildschirm auf iOS-Geräten. Für bestimmte Geräte gelten möglicherweise Limits für die Anzahl von Elementen, die angezeigt werden können.",
- "iosDeviceFeaturesIOSWallpaper": "Hiermit wird ein Bild zur Anzeige auf dem Startbildschirm und/oder dem Sperrbildschirm von iOS-Geräten angegeben.\r\n Um unterschiedliche Bilder für Start- und Sperrbildschirm zu verwenden, erstellen Sie ein Profil mit dem Bild für den Sperrbildschirm und ein Profil mit dem Bild für den Startbildschirm.\r\n Weisen Sie Ihren Benutzern anschließend beide Profile zu.\r\n \r\n
\r\n
Max. Dateigröße: 750 KB
\r\n
Dateityp: PNG, JPG oder JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Geben Sie Benachrichtigungseinstellungen für Apps an. Unterstützt iOS 9.3 und höher.",
- "iosDeviceFeaturesSharedDevice": "Hiermit wird optionaler Text zur Anzeige auf dem Sperrbildschirm angegeben. Diese Funktion wird unter iOS 9.3 und höher unterstützt. Weitere Informationen",
- "iosGeneralApplicationRestrictions": "Mit dieser Einstellung bleiben Sie darüber informiert, welche Benutzer Apps installieren, die nicht für die Verwendung in Ihrem Unternehmen genehmigt sind. Wählen Sie die Art der Liste für eingeschränkte Apps aus:
\r\n Verbotene Apps: Eine Liste der Apps, bei denen Sie informiert werden möchten, wenn Benutzer sie installieren. \r\n Genehmigte Apps: Eine Liste der Apps, die zur Verwendung in Ihrem Unternehmen genehmigt sind. Wenn Benutzer eine App installieren, die nicht in dieser Liste aufgeführt ist, werden Sie informiert. \r\n ",
- "iosGeneralApplicationVisibility": "Verwenden Sie die Liste \"Apps anzeigen\" um festzulegen, welche iOS-Apps der Benutzer anzeigen oder starten kann. Verwenden Sie die Liste \"Ausgeblendete Apps\", um festzulegen, welche iOS-Apps der Benutzer nicht anzeigen oder starten kann.",
- "iosGeneralAutonomousSingleAppMode": "Apps, die Sie dieser Liste hinzufügen und einem Gerät zuweisen, können das Gerät so sperren, dass nur diese App nach ihrem Start ausgeführt werden kann, oder sie können das Gerät während der Ausführung einer bestimmten Aktion sperren (beispielsweise bei einer Prüfung). Sobald die Aktion abgeschlossen ist oder Sie die Einschränkung entfernen, kehrt das Gerät zu seinem Normalzustand zurück.",
- "iosGeneralKiosk": "Der Kioskmodus sperrt verschiedene Einstellungen in einem Gerät oder gibt eine einzige App an, die auf einem Gerät ausgeführt werden kann. Dies kann in Umgebungen wie beispielsweise einem Ladengeschäft hilfreich sein, in dem auf einem Gerät nur eine einzige Demo-App ausgeführt werden soll.",
- "macDeviceFeaturesAirprint": "Verwenden Sie diese Einstellungen, um macOS-Geräte für die automatische Verbindungsherstellung mit AirPrint-kompatiblen Druckern im Netzwerk zu konfigurieren. Sie benötigen die IP-Adresse und den Ressourcenpfad Ihrer Drucker.",
- "macDeviceFeaturesAssociatedDomains": "Konfigurieren Sie zugeordnete Domänen, um Daten und Anmeldeinformationen zwischen den Apps und Websites Ihrer Organisation freizugeben. Dieses Profil kann auf Geräte mit macOS 10.15 oder höher angewendet werden.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Konfigurieren Sie eine App-Erweiterung, die einmaliges Anmelden (Single Sign-On, SSO) für Geräte mit macOS 10.15 oder höher aktiviert.",
- "macDeviceFeaturesLoginItems": "Wählen Sie aus, welche Apps, Dateien und Ordner geöffnet werden sollen, wenn sich Benutzer bei ihren Geräten anmelden. Wenn Sie nicht möchten, dass Benutzer das Verhalten der Apps beim Öffnen ändern, können Sie die App aus der Benutzerkonfiguration ausblenden.",
- "macDeviceFeaturesLoginWindow": "Hiermit konfigurieren Sie die Darstellung des macOS-Anmeldebildschirms und die Funktionen, die den Benutzern vor und nach der Anmeldung zur Verfügung stehen.",
- "macExtensionsKernelExtensions": "Verwenden Sie diese Einstellungen zum Konfigurieren der Kernelerweiterungsrichtlinie auf macOS-Geräten unter 10.13.2 oder höher.",
- "macGeneralDomains": "Vom Benutzer gesendete oder empfangene E-Mails, die nicht den hier angegebenen Domänen entsprechen, werden als nicht vertrauenswürdig markiert.",
- "windows10EndpointProtectionApplicationGuard": "Bei der Verwendung von Microsoft Edge schützt Microsoft Defender Application Guard Ihre Umgebung vor Websites, die von Ihrer Organisation nicht als vertrauenswürdig definiert wurden. Wenn Benutzer Websites besuchen, die nicht in Ihrer isolierten Netzwerkgrenze aufgeführt sind, werden die Websites in einer virtuellen Browsersitzung in Hyper-V geöffnet. Vertrauenswürdige Sites werden durch eine Netzwerkgrenze definiert, die in der Gerätekonfiguration konfiguriert werden kann. Beachten Sie, dass dieses Feature nur für Geräte mit 64-Bit-Windows 10 oder höher verfügbar ist.",
- "windows10EndpointProtectionCredentialGuard": "Durch das Aktivieren von Credential Guard werden folgende erforderliche Einstellungen aktiviert:\r\n \r\n
\r\n
Virtualisierungsbasierte Sicherheit aktivieren: Aktiviert die virtualisierungsbasierte Sicherheit (VBS) beim nächsten Neustart. Die virtualisierungsbasierte Sicherheit verwendet Windows Hypervisor, um Unterstützung für Sicherheitsdienste bereitzustellen.
\r\n \r\n
Sicherer Start mit direktem Speicherzugriff: Aktiviert VBS mit sicherem Start und direktem Speicherzugriff (DMA).
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Wählen Sie zusätzliche Apps, die durch die Microsoft Defender-Anwendungssteuerung entweder überwacht werden müssen oder als vertrauenswürdig eingestuft und ausgeführt werden können. Windows-Komponenten und alle Apps aus dem Windows Store werden automatisch als zur Ausführung vertrauenswürdig eingestuft.
\r\n Anwendungen werden nicht blockiert, wenn sie im Modus \"Nur überwachen\" ausgeführt werden. Im Modus \"Nur überwachen\" werden alle Ereignisse in lokalen Clientprotokollen erfasst.\r\n ",
- "windows10GeneralPrivacyPerApp": "Fügen Sie Apps hinzu, die ein anderes Datenschutzverhalten aufweisen sollen als das von Ihnen unter \"Standarddatenschutz\" definierte.",
- "windows10NetworkBoundaryNetworkBoundary": "Die Netzwerkgrenze ist die Liste der Unternehmensressourcen, z. B. eine in der Cloud gehostete Domäne und IP-Adressbereiche für Computer, die sich im Unternehmensnetzwerk befinden. Definieren Sie Netzwerkgrenzen, um Richtlinien zum Schutz von Daten anzuwenden, die an diesen Standorten vorliegen.",
- "windowsHealthMonitoring": "Hiermit wird die Richtlinie für die Windows-Integritätsüberwachung konfiguriert.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone kann Benutzer daran hindern, die in der Liste unzulässiger Apps enthaltenen Apps bzw. Apps, die nicht in der Liste genehmigter Apps aufgeführt sind, zu installieren oder zu starten. Alle verwalteten Apps müssen der Liste genehmigter Apps hinzugefügt werden."
- },
- "Inputs": {
- "accountDomain": "Kontodomäne",
- "accountDomainHint": "z. B. contosodomain",
- "accountDomainInfoBalloon": "Geben Sie die Kontodomäne des Benutzers an.",
- "accountTypeInfoBalloon": "Geben Sie den Kontotyp an, der basierend auf dem Authentifizierungsmodell konfiguriert wird.",
- "allowContactSetting": "Benutzer das Ändern der Kontakteinstellung erlauben",
- "allowContactSyncInfoBalloon": "Geben Sie an, ob der Benutzer die Kontaktsynchronisierungseinstellung ändern darf.",
- "allowUserChange": "Benutzer das Ändern der Einstellung erlauben",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Geben Sie einen Paketnamen wie z. B. \"com.microsoft.word\" ein.",
- "androidUrlValidation": "Geben Sie eine URL ähnlich der folgenden ein: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=de",
- "appInstallContext": "App-Installationskontext",
- "appUrlLabel": "Appstore-URL",
- "appleUrlValidation": "Geben Sie eine gültige URL im Format https://www.itunes.apple.com/de/app/microsoft-excel/id586683407?mt=8 ein.",
- "applicableDeviceType": "Anwendbarer Gerätetyp",
- "assignmentActionLabel": "Modus",
- "authenticationMethodInfoBalloon": "Geben Sie die Authentifizierungsmethode für den Benutzer an.",
- "authenticationMetod": "Authentifizierungsmethode",
- "authenticationType": "Authentifizierungstyp",
- "authenticationTypeInfoBalloon": "Geben Sie den Authentifizierungstyp für den Benutzer an.",
- "availableLicenseCount": "Verfügbare Lizenzen",
- "basicAuth": "Standardauthentifizierung",
- "biometricsInfoBalloon": "Möglicherweise werden biometrische Daten wie z. B. TouchID oder FaceID benötigt, damit Benutzer auf die App auf ihrem Gerät zugreifen können. Sofern erforderlich, werden neben dem in diesem Profil gewählten Authentifizierungsverfahren auch biometrische Daten verwendet. Diese Einstellung sollte bei der Bereitstellung von Intune-App-Schutzrichtlinien nicht aktiviert werden, weil die App-Schutzrichtlinie Zugriffsanforderungen umfasst, die vor dem Zugriff auf verwaltete Daten erfüllt werden müssen. Wenn Sie beide Optionen aktivieren, werden mehrere Aufforderungen für den Zugriff auf Outlook Mobile angezeigt. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die App-Standardeinstellung \"Aus\".",
- "bookNameLabel": "E-Book-Name",
- "bundleDescriptionHint": "Geben Sie eine Beschreibung für die enthaltenen Apps ein.",
- "calendar": "Kalender",
- "categoryLabel": "Kategorie",
- "categoryNameLabel": "Standardname",
- "certProfileType": "Zertifikatprofiltyp",
- "certificate": "Zertifikat",
- "certificates": "Zertifikate",
- "commandLineLabel": "Befehlszeilenargumente",
- "commandLineSizeHint": "Der Text der Befehlszeilenargumente darf maximal 1024 Zeichen lang sein.",
- "configurationSettingsFormatLabel": "Format der Konfigurationseinstellungen",
- "configurationSettingsLabel": "Einstellungsformat",
- "contactSync": "Kontakte speichern",
- "contactSyncInfoBalloon": "Durch das Speichern von Kontakten im nativen Adressbuch des mobilen Geräts können neue Anrufe und Textnachrichten mit den vorhandenen Outlook-Kontakten des Benutzers verknüpft werden. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die App-Standardeinstellung \"Aus\".",
- "contacts": "Kontakte",
- "createdDateTime": "Erstellt",
- "defaultCategoryHint": "Standardkategorien können nicht geändert werden.",
- "deploySMimeCertsFromIntune": "S/MIME-Zertifikate aus Intune bereitstellen",
- "descriptionGenericLabel": "Beschreibung",
- "descriptionHint": "Beschreibung eingeben...",
- "descriptionLabel": "Beschreibung",
- "descriptionSizeHint": "Die Länge der Beschreibung darf 10.000 Zeichen nicht überschreiten.",
- "developerLabel": "Entwickler",
- "developerSizeHint": "Der Entwicklername darf maximal 256 Zeichen lang sein.",
- "disable": "Deaktivieren",
- "disabled": "Deaktiviert",
- "displayNameLabel": "Name",
- "displayVersionHint": "App-Version eingeben",
- "displayVersionLabel": "App-Version",
- "displayVersionLengthCheck": "Die Anzeigeversion darf maximal 130 Zeichen lang sein.",
- "eBookCategoryNameLabel": "Standardname",
- "emailAccount": "E-Mail-Kontoname",
- "emailAccountHint": "z. B. Unternehmens-E-Mail-Adresse",
- "emailAccountInfoBalloon": "Geben Sie den Anzeigenamen für das E-Mail-Konto an, wie er den Benutzern auf ihren Geräten angezeigt wird.",
- "emailAddressAttribute": "E-Mail-Adresse aus Microsoft Entra ID",
- "emailAddressInfoBalloon": "Geben Sie die E-Mail-Adresse an, die zum Senden und Empfangen von E-Mail verwendet werden soll.",
- "emailServer": "E-Mail-Server",
- "emailServerHint": "Beispiel: mail.contoso.com",
- "emailServerInfoBalloon": "Geben Sie den Hostnamen Ihres Exchange-Servers an.",
- "enable": "Aktivieren",
- "enableSMime": "S/MIME aktivieren",
- "enabled": "Aktiviert",
- "encryptAllEmails": "Alle E-Mails verschlüsseln",
- "encryptionCertificates": "Verschlüsselungszertifikate",
- "endUserNotifications": "Benutzerbenachrichtigungen",
- "enrollmentTypeLabel": "Geräteregistrierungstyp",
- "externalRecipients": "E-Mail-Info zu externen Empfängern",
- "externalRecipientsInfoBalloon": "Die E-Mail-Info zu externen Empfängern wird angezeigt, wenn der Absender einen externen Empfänger oder eine Verteilergruppe hinzufügt, die externe Empfänger enthält. Diese E-Mail-Info informiert die Absender darüber, wenn eine verfasste Nachricht die Organisation verlässt und unterstützt sie dabei, die richtigen Entscheidungen über Wortlaut, Ton und Inhalt zu treffen. Diese Einstellung ist nur für Exchange Online-Konten und lokale Konten verfügbar, die eine hybride moderne Authentifizierung nutzen. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App \"Ein\".",
- "focusedInbox": "Posteingang mit Relevanz",
- "focusedInboxInfoBalloon": "Der Posteingang mit Relevanz unterteilt Ihren Posteingang in zwei Registerkarten: \"Relevant\" und \"Sonstige\". Ihre wichtigsten E-Mails befinden sich auf der Registerkarte \"Relevant\", während die übrigen Nachrichten weiterhin leicht zugänglich, aber nicht im Weg sind: auf der Registerkarte \"Sonstige\". Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die App-Standardeinstellung \"Ein\".",
- "fullScreenEnabledLabel": "Vollbild",
- "gmailNineAmountOfEmail": "Menge an E-Mails für die Synchronisierung",
- "gmailNineAuthenticationMethodInfoBalloon": "Wählen Sie aus, wie Benutzer sich beim E-Mail-Server authentifizieren sollen. Verwenden Sie Zertifikate, um den Endbenutzern die sicherste und komfortabelste Benutzeroberfläche zu bieten. Die zertifikatbasierte Authentifizierung ist noch nicht verfügbar, weil SCEP- und PKCS-Zertifikatprofile für Geräte von Gerätebesitzern nicht verfügbar sind. ",
- "gmailNineCertificateUPNInfoBalloon": "Das Zertifikat muss den Benutzerprinzipalnamen (UPN) als alternativen Antragstellernamen enthalten.",
- "gmailNineEmailAddressInfoBalloon": "Das Attribut, das Intune aus Microsoft Entra ID abruft, um die von diesem Profil verwendete E-Mail-Adresse dynamisch zu generieren, z. B. MeinName@contoso.com (UPN). Erfahren Sie mehr über Microsoft Entra-Attribute für E-Mail-Profile.",
- "gmailNineEmailServerInfoBalloon": "Die Exchange-Adresse (URL) des E-Mail-Servers, mit der die von Ihnen angegebene App eine Verbindung herstellt, um E-Mails abzurufen.",
- "gmailNineEmailSynchronizeInfoBalloon": "Hiermit wird die Menge an E-Mails gesteuert, die vom Client synchronisiert werden.",
- "gmailNineSSLInfoBalloon": "Aktivieren Sie SSL, um die gesamte Kommunikation mit dem E-Mail-Server abzusichern.",
- "gmailNineUsernameInfoBalloon": "Das Attribut, das Intune aus Microsoft Entra ID abruft, um den von diesem Profil verwendeten Benutzernamen dynamisch zu generieren, z. B. MeinName@contoso.com (UPN) oder MeinName (Benutzername). Erfahren Sie mehr über Microsoft Entra-Attribute für E-Mail-Profile.",
- "ignoreManifestScope": "Manifestbereich ignorieren",
- "ignoreVersionDetection": "App-Version ignorieren",
- "informationUrlLabel": "Informations-URL",
- "informationUrlSizeHint": "Die maximale Länge der Informations-URL beträgt 1024 Zeichen.",
- "installAsManaged": "Als verwaltet installieren",
- "installationSourceLabel": "App-Typ",
- "installerTypeInfoBalloon": "Der Installertyp des Anwendungspakets.",
- "installerTypeLabel": "Installertyp",
- "isFeatured": "Diese App als ausgewählte App im Unternehmensportal anzeigen",
- "isMAMEnabledToggleLabel": "Ja",
- "lastModifiedDateTime": "Uhrzeit der letzten Aktualisierung",
- "ldapUrl": "LDAP-URL",
- "licensingType": "Unterstützt die Gerätekontextzuweisung",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Mindestens erforderliches Betriebssystem",
- "modernAuth": "Moderne Authentifizierung",
- "nameHint": "Geben Sie einen Namen ein",
- "nameLabel": "Name",
- "nameSizeHint": "Der Name darf maximal 512 Zeichen lang sein.",
- "notConfigured": "Nicht konfiguriert",
- "notesLabel": "Hinweise",
- "notesSizeHint": "Der Hinweistext darf maximal 1024 Zeichen lang sein.",
- "notificationType": "Benachrichtigungstyp",
- "oneDay": "Ein Tag",
- "oneMonth": "Ein Monat",
- "oneWeek": "Eine Woche",
- "outlookSMimeSettings": "Outlook-S/MIME-Einstellungen",
- "ownerLabel": "Besitzer",
- "ownerSizeHint": "Der Besitzername darf maximal 256 Zeichen lang sein.",
- "packageIdLabel": "Paketbezeichner",
- "packageNameLabel": "Paketname",
- "pivCredentialNotConfigured": "Sie haben keinen Aussteller für abgeleitete Anmeldeinformationen für Ihren Mandanten ausgewählt. Sie müssen einen Aussteller konfigurieren, um diese Richtlinie erfolgreich auf Geräte anwenden zu können.",
- "platformLabel": "Plattform",
- "policyDescriptionLabel": "Beschreibung",
- "policyNameLabel": "Name",
- "preComposedIconEnabled": "Vorverfasst",
- "primarySMTPAddress": "Primäre SMTP-Adresse",
- "privacyUrlLabel": "URL zu den Datenschutzbestimmungen",
- "publisherHint": "Geben Sie einen Herausgebernamen ein.",
- "publisherLabel": "Herausgeber",
- "publisherSizeHint": "Der Herausgebernamen muss zwischen 2 und 1024 Zeichen (einschließlich) lang sein.",
- "require": "Anfordern",
- "requireBiometrics": "Biometrische Daten für App-Zugriff erforderlich",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "Mindestens ein Geltungsbereichstag ist erforderlich.",
- "searchAppLabel": "App auswählen",
- "searchAppLinkText": "App Store durchsuchen",
- "searchWinGetPublicRepositoryLinkText": "Durchsuchen Sie das Community-Repository des Windows-Paket-Managers",
- "searchWinGetStoreRepositoryLinkText": "Microsoft Store-App (neu) durchsuchen",
- "selectAAD": "Wählen Sie ein Microsoft Entra-Attribut aus.",
- "selectAppFileLabel": "Datei auswählen",
- "selectAppFileLinkText": "App-Paketdatei auswählen",
- "selectAppFileToUpdateLabel": "Zu aktualisierende Datei auswählen",
- "selectAuthMethod": "Authentifizierungsmethode auswählen",
- "selectAuthType": "Authentifizierungstyp auswählen",
- "selectCatalogAppLabel": "App auswählen",
- "selectCatalogAppLinkText": "App-Katalog für Unternehmen durchsuchen",
- "selectCertificate": "Zertifikat auswählen",
- "signAllEmails": "Alle E-Mails signieren",
- "signingCertificates": "Signaturzertifikate",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Beschreibung der Suite",
- "suiteNameLabel": "Name der Suite",
- "targetApplicationBundleIdentifier": "Bezeichner für Zielanwendungspaket",
- "targetedPlatformsLabel": "Zielplattform",
- "tasks": "Tasks",
- "threeDays": "Drei Tage",
- "totalLicenseCount": "Lizenzen insgesamt",
- "twoWeeks": "Zwei Wochen",
- "unifiedAssignmentsLabel": "Zuweisen zu:",
- "unlimited": "Unbegrenzt",
- "urlHint": "Geben Sie eine gültige URL ein.",
- "useManagedBrowserHint": "Nur Android und iOS. Erfahren Sie mehr.",
- "useManagedBrowserLabel": "Managed Browser zum Öffnen dieses Links anfordern",
- "userPrinicipalName": "Benutzerprinzipalname",
- "username": "Benutzername",
- "usernameAttribute": "Benutzernamenattribut aus Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Geben Sie den Benutzerprinzipalnamen für das E-Mail-Profil an, das zum Authentifizieren des Kontos verwendet wird.",
- "usernamePassword": "Benutzername und Kennwort",
- "webAppUrlHint": "Geben Sie eine gültige URL ein, die mit http:// oder https:// beginnt.",
- "webAppUrlLabel": "App-URL",
- "webAppUrlSizeHint": "Die maximale Länge der App-URL beträgt 1024 Zeichen",
- "windowsUrlValidation": "Geben Sie eine gültige URL ähnlich diese https://www.microsoft.com/store/p/lync/9wzdncrfhvhm ein.",
- "xMLDataEntered": "Eingegebenen XML-Daten",
- "xmlFormatInvalid": "Das XML-Richtlinienformat ist ungültig.",
- "xmlTooLarge": "Die Eingabegröße muss unter 1 MB liegen."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Fehler beim Löschen von {0}",
- "failureCa": "Fehler beim Löschen von {0}, da ZS-Richtlinien darauf verweisen.",
- "modifying": "{0} wird gelöscht.",
- "success": "{0} erfolgreich gelöscht"
- },
- "Notify": {
- "failure": "Fehler beim Aktualisieren von \"{0}\".",
- "modifying": "\"{0}\" wird geändert",
- "success": "\"{0}\" erfolgreich aktualisiert"
- },
- "menuLabel": "Authentifizierungskontext"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Erfahren Sie mehr über die Anforderung von Authentifizierungsmethoden, die von Verbundanbietern erfüllt werden.",
- "certificate": "Zertifikatauthentifizierung",
- "infoBubble": "Geben Sie eine erforderliche Authentifizierungsmethode an, die vom Verbundanbieter, z. B. AD FS, erfüllt werden muss.",
- "multifactor": "Multi-Faktor-Authentifizierung",
- "require": "Verbundauthentifizierungsmethode erforderlich (Vorschau)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Die Richtlinie für persistente Browsersitzungen funktioniert nur dann ordnungsgemäß, wenn \"Alle Cloud-Apps\" ausgewählt ist. Aktualisieren Sie Ihre Cloud-Apps-Auswahl."
- },
- "Option": {
- "always": "Immer persistent",
- "help": "Bei einer persistenten Browsersitzung können Benutzer nach dem Schließen und erneuten Öffnen ihres Browserfensters angemeldet bleiben. \n
\n
Diese Einstellung funktioniert ordnungsgemäß, wenn \"Alle Cloud-Apps\" ausgewählt ist.
\n
Diese Einstellung hat keine Auswirkungen auf die Tokenlebensdauer oder auf die Einstellung für die Anmeldehäufigkeit.
\n
Hiermit wird die Richtlinie zum Anzeigen der Option \"Angemeldet bleiben\" im Unternehmensbranding außer Kraft gesetzt.
\n
\"Niemals persistent\" setzt Ansprüche auf persistentes einmaliges Anmelden von Verbundauthentifizierungsdiensten außer Kraft.
\n
\"Niemals persistent\" verhindert auf mobilen Geräten das einmalige Anmelden zwischen verschiedenen Anwendungen sowie zwischen Anwendungen und dem mobilen Browser des Benutzers.
\n",
- "label": "Beständige Browsersitzung",
- "never": "Niemals persistent"
- },
- "Warning": {
- "allApps": "\"Persistente Browsersitzung\" funktioniert nur dann ordnungsgemäß, wenn \"Alle Cloud-Apps\" ausgewählt ist. Ändern Sie Ihre Cloud-Apps-Auswahl. Klicken Sie hier, um weitere Informationen zu erhalten."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Stunden oder Tage",
- "value": "Häufigkeit"
- },
- "Option": {
- "Day": {
- "plural": "{0} Tage",
- "singular": "1 Tag"
- },
- "Hour": {
- "plural": "{0} Stunden",
- "singular": "1 Stunde"
- },
- "daysOption": "Tage",
- "everytime": "Jedes Mal",
- "help": "Zeitraum, bis ein Benutzer bei dem Versuch, auf eine Ressource zuzugreifen, zur erneuten Anmeldung aufgefordert wird. Die Standardeinstellung ist ein rollierendes Zeitfenster von 90 Tagen, d. h., Benutzer werden zur erneuten Authentifizierung aufgefordert, wenn sie auf ihrem Computer nach einer Inaktivität von 90 Tagen oder länger erstmals auf eine Ressource zuzugreifen versuchen.",
- "hoursOption": "Stunden",
- "label": "Anmeldehäufigkeit",
- "placeholder": "Einheiten auswählen"
- }
- },
- "mainOption": "Sitzungsdauer ändern",
- "mainOptionHelp": "Konfigurieren Sie, wie oft Benutzer zur Eingabe aufgefordert werden, und gibt an, ob Browsersitzungen dauerhaft gespeichert werden. Von Anwendungen, die moderne Authentifizierungsprotokolle nicht unterstützen, werden diese Richtlinien möglicherweise nicht berücksichtigt. Wenden Sie sich in diesem Fall an den Anwendungsentwickler."
- },
- "SingleSelectorActive": {
- "failed": "Diese Daten konnten nicht geladen werden.",
- "reattempt": "Daten werden geladen. {0} von {1} erneuten Versuchen."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Verzeichnisrollen auswählen"
- },
- "Excluded": {
- "gridAria": "Liste ausgeschlossener Benutzer"
- },
- "Included": {
- "gridAria": "Liste eingeschlossener Benutzer"
- },
- "Validation": {
- "customRoleIncluded": "\"Verzeichnisrollen\" umfasst mindestens eine benutzerdefinierte Rolle.",
- "customRoleSelected": "Es wurde mindestens eine benutzerdefinierte Rolle ausgewählt.",
- "failed": "\"{0}\" muss konfiguriert werden.",
- "roles": "Wählen Sie mindestens eine Rolle aus.",
- "usersGroups": "Wählen Sie mindestens einen Benutzer oder eine Gruppe aus."
- },
- "learnMore": "Steuern Sie den Zugriff basierend darauf, für wen die Richtlinie gelten wird, z. B. Benutzer und Gruppen, Workloadidentitäten, Verzeichnisrollen oder externe Gäste."
- },
- "advancedTabText": "Erweitert",
- "allCloudAppsErrorBox": "\"Alle Cloud-Apps\" muss ausgewählt werden, wenn die Zuweisung \"Kennwortänderung anfordern\" ausgewählt ist.",
- "allCloudAppsReauth": "„Alle Cloud-Apps“ muss ausgewählt werden, wenn die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ und die Bedingung „Anmelderisiko“ ausgewählt sind.",
- "allCloudOrSpecificApps": "Für die Sitzungssteuerung \"Anmeldehäufigkeit jedes Mal\" muss \"alle Cloud-Apps\" oder speziell unterstützte Apps ausgewählt werden.",
- "allDayCheckboxLabel": "Ganztägig",
- "allDevicePlatforms": "Jedes Gerät",
- "allGuestUserInfoContent": "Umfasst Microsoft Entra B2B-Gäste, aber keine SharePoint B2B-Gäste",
- "allGuestUserLabel": "Alle Gast- und externen Benutzer",
- "allRiskLevelsOption": "Alle Risikostufen",
- "allTrustedLocationLabel": "Alle vertrauenswürdigen Standorte",
- "allUserGroupSetSelectorLabel": "Alle ausgewählten Benutzer und Gruppen",
- "allUsersReauth": "Für das Sitzungssteuerelement \"Anmeldehäufigkeit jedes Mal\" muss \"Alle Benutzer\" ausgewählt sein.",
- "allUsersString": "Alle Benutzer",
- "and": "{0} UND {1} ",
- "andWithGrouping": "({0}) UND {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Cloud-app",
- "appContextOptionInfoContent": "Angefordertes Authentifizierungstag",
- "appContextOptionLabel": "Angefordertes Authentifizierungstag (Vorschau)",
- "appContextUriPlaceholder": "Beispiel: uri:contoso.com:level3",
- "appEnforceInfoBubble": "Für von der App erzwungene Einschränkungen sind möglicherweise zusätzliche Administratorkonfigurationen innerhalb der Cloud-Apps erforderlich. Die Einschränkungen treten nur für neue Sitzungen in Kraft.",
- "appNotSetSeletorLabel": "0 Cloud-Apps ausgewählt",
- "appReauthNotSupported": "Diese App unterstützt die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ nicht.",
- "applyConditionClientAppInfoBalloonContent": "Konfigurieren Sie Client-Apps, um die Richtlinie auf bestimmte Client-Apps anzuwenden.",
- "applyConditionDevicePlatformInfoBalloonContent": "Konfigurieren Sie Geräteplattformen, um die Richtlinie auf bestimmte Plattformen anzuwenden.",
- "applyConditionDeviceStateInfoBalloonContent": "Konfigurieren Sie den Gerätezustand, um die Richtlinie auf bestimmte Gerätezustände anzuwenden.",
- "applyConditionLocationInfoBalloonContent": "Konfigurieren Sie Standorte, um die Richtlinie auf vertrauenswürdige/nicht vertrauenswürdige Standorte anzuwenden.",
- "applyConditionSigninRiskInfoBalloonContent": "Konfigurieren Sie das Anmelderisiko, um die Richtlinie auf ausgewählte Risikostufen anzuwenden.",
- "applyConditionUserRiskInfoBalloonContent": "Konfigurieren Sie das Benutzerrisiko, um die Richtlinie auf ausgewählte Risikostufen anzuwenden.",
- "applyConditonLabel": "Konfigurieren",
- "ariaLabelPolicyDisabled": "Richtlinie ist deaktiviert",
- "ariaLabelPolicyEnabled": "Die Richtlinie ist aktiviert.",
- "ariaLabelPolicyReportOnly": "Die Richtlinie befindet sich im reinen Berichtmodus.",
- "blockAccess": "Zugriff blockieren",
- "builtInDirectoryRoleLabel": "Integrierte Verzeichnisrollen",
- "casCustomControlInfo": "Benutzerdefinierte Richtlinien müssen im Cloud App Security-Portal konfiguriert werden. Dieses Steuerelement funktioniert sofort für ausgewählte Apps und kann für jede App selbst integriert werden. Klicken Sie hier, um weitere Informationen zu beiden Szenarien zu erhalten.",
- "casInfoBubble": "Dieses Steuerelement funktioniert für verschiedene Cloud-Apps.",
- "casPreconfiguredControlInfo": "Dieses Steuerelement funktioniert sofort für ausgewählte Apps und kann für jede App selbst integriert werden. Klicken Sie hier, um weitere Informationen zu beiden Szenarien zu erhalten.",
- "cert64DownloadCol": "Base64-Zertifikat herunterladen",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Zertifikat herunterladen",
- "certDurationCol": "Ablauf",
- "certDurationStartCol": "Gültig ab",
- "certName": "VpnCert",
- "certainApps": "Nur bestimmte Apps werden für die „Anmeldehäufigkeit jedes Mal“ unterstützt, wenn die Zuweisungen „Multi-Faktor-Authentifizierung erfordern“ und „Kennwortänderung erfordern“ nicht ausgewählt sind.",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Anwendungen wählen",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Gewählte Anwendungen",
- "chooseApplicationsEmpty": "Keine Anwendungen",
- "chooseApplicationsNone": "Kein",
- "chooseApplicationsNoneFound": "Wir haben \"{0}\" nicht gefunden. Versuchen Sie es mit einem anderen Namen oder einer anderen ID.",
- "chooseApplicationsPlural": "\"{0}\" und {1} weitere",
- "chooseApplicationsReAuthEverytimeInfo": "Suchen Sie nach Ihrer App? Einige Anwendungen können nicht mit Wert „Erneute Authentifizierung erforderlich – jedes Mal“ des Sitzungssteuerelements verwendet werden.",
- "chooseApplicationsRemove": "Entfernen",
- "chooseApplicationsReturnedPlural": "{0} Anwendungen gefunden",
- "chooseApplicationsReturnedSingular": "1 Anwendung gefunden",
- "chooseApplicationsSearchBalloon": "Suchen Sie nach einer Anwendung, indem Sie ihren Namen oder ihre ID eingeben.",
- "chooseApplicationsSearchHint": "Anwendungen suchen...",
- "chooseApplicationsSearchLabel": "Anwendungen",
- "chooseApplicationsSearching": "Suche wird ausgeführt...",
- "chooseApplicationsSelect": "Auswählen",
- "chooseApplicationsSelected": "Ausgewählt",
- "chooseApplicationsSingular": "{0} und 1 weitere",
- "chooseApplicationsTooMany": "Weitere Ergebnisse können angezeigt werden. Filtern Sie anhand des Suchfelds.",
- "chooseLocationCorpnetItem": "Unternehmensnetzwerk",
- "chooseLocationSelectedLocationsLabel": "Ausgewählte Standorte",
- "chooseLocationTrustedIpsItem": "Vertrauenswürdige IP-Adressen für Multi-Faktor-Authentifizierung",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Standorte auswählen",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Ausgewählte Standorte",
- "chooseLocationsEmpty": "Keine Speicherorte",
- "chooseLocationsExcludedSelectorTitle": "Auswählen",
- "chooseLocationsIncludedSelectorTitle": "Auswählen",
- "chooseLocationsNone": "Kein",
- "chooseLocationsNoneFound": "Wir haben \"{0}\" nicht gefunden. Versuchen Sie es mit einem anderen Namen oder einer anderen ID.",
- "chooseLocationsPlural": "\"{0}\" und {1} weitere",
- "chooseLocationsRemove": "Entfernen",
- "chooseLocationsReturnedPlural": "{0} Standorte gefunden",
- "chooseLocationsReturnedSingular": "1 Standort gefunden",
- "chooseLocationsSearchBalloon": "Suchen Sie nach einem Standort, indem Sie seinen Namen eingeben.",
- "chooseLocationsSearchHint": "Suche nach Standorten...",
- "chooseLocationsSearchLabel": "Speicherorte",
- "chooseLocationsSearching": "Suche wird ausgeführt...",
- "chooseLocationsSelect": "Auswählen",
- "chooseLocationsSelected": "Ausgewählt",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Auswählen",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Auswählen",
- "chooseLocationsSingular": "{0} und 1 weitere",
- "chooseLocationsTooMany": "Weitere Ergebnisse können angezeigt werden. Filtern Sie anhand des Suchfelds.",
- "claimProviderAddCommandText": "Neues benutzerdefiniertes Steuerelement",
- "claimProviderAddNewBladeTitle": "Neues benutzerdefiniertes Steuerelement",
- "claimProviderDeleteCommand": "Löschen",
- "claimProviderDeleteDescription": "Möchten Sie \"{0}\" löschen? Diese Aktion kann nicht rückgängig gemacht werden.",
- "claimProviderDeleteTitle": "Sind Sie sicher?",
- "claimProviderEditInfoText": "Geben Sie die JSON für benutzerdefinierte Steuerelemente ein, die von Ihren Anspruchsanbietern bereitgestellt wird.",
- "claimProviderNotificationCreateDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wird erstellt.",
- "claimProviderNotificationCreateFailedDescription": "Fehler beim Erstellen des benutzerdefinierten Steuerelements \"{0}\". Versuchen Sie es später noch mal.",
- "claimProviderNotificationCreateFailedTitle": "Fehler beim Erstellen von benutzerdefiniertem Steuerelement",
- "claimProviderNotificationCreateSuccessDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wurde erstellt.",
- "claimProviderNotificationCreateSuccessTitle": "\"{0}\" wurde erstellt",
- "claimProviderNotificationCreateTitle": "\"{0}\" wird erstellt",
- "claimProviderNotificationDeleteDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wird gelöscht.",
- "claimProviderNotificationDeleteFailedDescription": "Fehler beim Löschen des benutzerdefinierten Steuerelements \"{0}\". Versuchen Sie es später noch mal.",
- "claimProviderNotificationDeleteFailedTitle": "Fehler beim Löschen von benutzerdefiniertem Element",
- "claimProviderNotificationDeleteSuccessDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wurde gelöscht.",
- "claimProviderNotificationDeleteSuccessTitle": "\"{0}\" wurde gelöscht",
- "claimProviderNotificationDeleteTitle": "\"{0}\" wird gelöscht.",
- "claimProviderNotificationUpdateDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wird aktualisiert.",
- "claimProviderNotificationUpdateFailedDescription": "Fehler beim Aktualisieren des benutzerdefinierten Steuerelements \"{0}\". Versuchen Sie es später noch mal.",
- "claimProviderNotificationUpdateFailedTitle": "Fehler beim Aktualisieren von benutzerdefiniertem Steuerelement",
- "claimProviderNotificationUpdateSuccessDescription": "Benutzerdefiniertes Steuerelement \"{0}\" wurde aktualisiert.",
- "claimProviderNotificationUpdateSuccessTitle": "\"{0}\" wurde aktualisiert",
- "claimProviderNotificationUpdateTitle": "\"{0}\" wird aktualisiert",
- "claimProviderValidationAppIdInvalid": "Der AppId-Wert ist ungültig. Überprüfen Sie ihn, und versuchen Sie es noch mal.",
- "claimProviderValidationClientIdMissing": "Bei den Daten fehlt ein ClientId-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationControlClaimsRequestedMissing": "Bei \"Control\" fehlt ein ClaimsRequested-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "Dem Element \"ClaimsRequested\" fehlt ein Type-Wert. Überprüfen Sie das Element, und versuchen Sie es noch mal.",
- "claimProviderValidationControlIdAlreadyExists": "Der Id-Wert von \"Control\" ist bereits vorhanden. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationControlIdMissing": "Bei \"Control\" fehlt ein Id-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "Der Id-Wert von \"Control\" kann nicht entfernt werden, weil eine vorhandene Richtlinie darauf verweist. Entfernen Sie ihn zuerst aus der Richtlinie.",
- "claimProviderValidationControlIdTooManyControls": "Die Eigenschaft \"Control\" weist zu viele Steuerelemente auf. Überprüfen Sie die Eigenschaft, und versuchen Sie es noch mal.",
- "claimProviderValidationControlIdValueReserved": "Der Id-Wert von \"Control\" ist ein reserviertes Schlüsselwort, verwenden Sie eine andere ID.",
- "claimProviderValidationControlNameAlreadyExists": "Der Name-Wert von \"Control\" ist bereits vorhanden. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationControlNameMissing": "Bei \"Control\" fehlt ein Name-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationControlsMissing": "Bei den Daten fehlt ein Controls-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationDiscoveryUrlMissing": "Bei den Daten fehlt ein DiscoveryUrl-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationInvalid": "Die bereitgestellten Daten sind ungültig. Überprüfen Sie sie, und versuchen Sie es noch mal.",
- "claimProviderValidationInvalidJsonDefinition": "Das benutzerdefinierte Steuerelement kann nicht gespeichert werden. Prüfen Sie den JSON-Text, und versuchen Sie es noch mal.",
- "claimProviderValidationNameAlreadyExists": "Der Name-Wert ist bereits vorhanden. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationNameMissing": "Bei den Daten fehlt ein Name-Wert. Überprüfen Sie die Werte, und versuchen Sie es noch mal.",
- "claimProviderValidationUnknown": "Unbekannter Fehler beim Überprüfen der bereitgestellten Daten. Überprüfen Sie sie, und versuchen Sie es noch mal.",
- "claimProvidersNone": "Keine benutzerdefinierten Steuerelemente",
- "claimProvidersSearchPlaceholder": "Durchsuchen Sie die Steuerelemente.",
- "classicPoilcyFilterTitle": "Zeigen",
- "classicPolicyAllPlatforms": "Alle Plattformen",
- "classicPolicyClientAppBrowserAndNative": "Browser, mobile Apps und Desktopclients",
- "classicPolicyCloudAppTitle": "Cloudanwendung",
- "classicPolicyControlAllow": "Zulassen",
- "classicPolicyControlBlock": "Blockieren",
- "classicPolicyControlBlockWhenNotAtWork": "Zugriff blockieren, wenn nicht gearbeitet wird",
- "classicPolicyControlRequireCompliantDevice": "Erfordert kompatibles Gerät",
- "classicPolicyControlRequireDomainJoinedDevice": "In Domäne eingebundenes Gerät anfordern",
- "classicPolicyControlRequireMfa": "Multi-Faktor-Authentifizierung erfordern",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Multi-Faktor-Authentifizierung erfordern, wenn nicht bei der Arbeit",
- "classicPolicyDeleteCommand": "Löschen",
- "classicPolicyDeleteFailTitle": "Fehler beim Löschen der klassischen Richtlinie",
- "classicPolicyDeleteInProgressTitle": "Klassische Richtlinie wird gelöscht",
- "classicPolicyDeleteSuccessTitle": "Klassische Richtlinie gelöscht",
- "classicPolicyDetailBladeTitle": "Details",
- "classicPolicyDisableCommand": "Deaktivieren",
- "classicPolicyDisableConfirmation": "Möchten Sie \"{0}\" deaktivieren? Diese Aktion kann nicht rückgängig gemacht werden.",
- "classicPolicyDisableFailDescription": "Fehler beim Deaktivieren von \"{0}\".",
- "classicPolicyDisableFailTitle": "Fehler beim Deaktivieren der klassischen Richtlinie",
- "classicPolicyDisableInProgressDescription": "\"{0}\" wird deaktiviert.",
- "classicPolicyDisableInProgressTitle": "Klassische Richtlinie wird deaktiviert",
- "classicPolicyDisableSuccessDescription": "\"{0}\" wurde erfolgreich deaktiviert.",
- "classicPolicyDisableSuccessTitle": "Klassische Richtlinie deaktiviert",
- "classicPolicyEasSupportedPlatforms": "Von Exchange ActiveSync unterstützte Plattformen",
- "classicPolicyEasUnsupportedPlatforms": "Von Exchange ActiveSync nicht unterstützte Plattformen",
- "classicPolicyExcludedPlatformsTitle": "Ausgeschlossene Geräteplattformen",
- "classicPolicyFilterAll": "Alle Richtlinien",
- "classicPolicyFilterDisabled": "Deaktivierte Richtlinien",
- "classicPolicyFilterEnabled": "Aktivierte Richtlinien",
- "classicPolicyIncludeExcludeMembersDescription": "Durch das Ausschließen von Gruppen können Sie Richtlinien in Phasen migrieren.",
- "classicPolicyIncludeExcludeMembersTitle": "Gruppen einschließen/ausschließen",
- "classicPolicyIncludedPlatformsTitle": "Eingeschlossene Geräteplattformen",
- "classicPolicyManualMigrationMessage": "Diese Richtlinie muss manuell migriert werden.",
- "classicPolicyMigrateCommand": "Migrieren",
- "classicPolicyMigrateConfirmation": "Möchten Sie \"{0}\" migrieren? Diese Richtlinie kann nur einmal migriert werden.",
- "classicPolicyMigrateFailDescription": "Fehler bei der Migration von \"{0}\".",
- "classicPolicyMigrateFailTitle": "Fehler beim Migrieren der klassischen Richtlinie",
- "classicPolicyMigrateInProgressDescription": "\"{0}\" wird migriert.",
- "classicPolicyMigrateInProgressTitle": "Klassische Richtlinie wird migriert",
- "classicPolicyMigrateRecommendText": "Empfehlung: Führen Sie eine Migration zu den neuen Azure-Portalrichtlinien durch.",
- "classicPolicyMigrateSuccessTitle": "Klassische Richtlinie erfolgreich migriert",
- "classicPolicyMigratedSuccessDescription": "Diese klassische Richtlinie kann jetzt unter \"Richtlinien\" verwaltet werden.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "Diese klassische Richtlinie wurde in {0} neue Richtlinien migriert. Neue Richtlinien können unter \"Richtlinien\" verwaltet werden.",
- "classicPolicyNoEditPermissionMsg": "Sie haben keine Berechtigung zum Bearbeiten dieser Richtlinie. Nur globale Administratoren und Sicherheitsadministratoren können die Richtlinie bearbeiten. Klicken Sie hier, um weitere Informationen zu erhalten.",
- "classicPolicySaveFailDescription": "Fehler beim Speichern von \"{0}\".",
- "classicPolicySaveFailTitle": "Fehler beim Speichern der klassischen Richtlinien",
- "classicPolicySaveInProgressDescription": "\"{0}\" wird gespeichert.",
- "classicPolicySaveInProgressTitle": "Klassische Richtlinie wird gespeichert",
- "classicPolicySaveSuccessDescription": "\"{0}\" wurde erfolgreich gespeichert.",
- "classicPolicySaveSuccessTitle": "Klassische Richtlinie gespeichert",
- "clientAppBladeLegacyInfoBanner": "Die Legacyauthentifizierung wird zurzeit nicht unterstützt.",
- "clientAppBladeLegacyUpsellBanner": "Nicht unterstützte Client-Apps blockieren (Vorschau)",
- "clientAppBladeTitle": "Client-Apps",
- "clientAppDescription": "Wählen Sie die Client-Apps aus, auf die diese Richtlinie angewendet wird.",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Alle übrigen Bedingungen werden von Exchange ActiveSync zurzeit nicht unterstützt.",
- "clientAppLearnMore": "Steuern Sie den Benutzerzugriff für bestimmte Clientanwendungen, die keine moderne Authentifizierung verwenden.",
- "clientAppLegacyHeader": "Legacy-Authentifizierungsclients",
- "clientAppMobileDesktop": "Mobile Apps und Desktopclients",
- "clientAppModernHeader": "Clients mit moderner Authentifizierung",
- "clientAppOnlySupportedPlatforms": "Richtlinie nur auf unterstützte Plattformen anwenden",
- "clientAppSelectSpecificClientApps": "Client-Apps auswählen",
- "clientAppWebBrowser": "Browser",
- "clientAppsSelectedLabel": "{0} eingeschlossen",
- "clientTypeBrowser": "Browser",
- "clientTypeEas": "Exchange ActiveSync-Clients",
- "clientTypeEasInfo": "Exchange ActiveSync-Clients, die nur die Legacyauthentifizierung verwenden.",
- "clientTypeModernAuth": "Clients mit moderner Authentifizierung",
- "clientTypeOtherClients": "Andere Clients",
- "clientTypeOtherClientsInfo": "Dies schließt ältere Office-Clients und weitere E-Mail-Protokolle (POP, IMAP, SMTP usw.) ein. [Weitere Informationen][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "{0} der in dieser Richtlinie konfigurierten Cloud-Apps wurden aus dem Verzeichnis gelöscht, aber dies wirkt sich nicht auf die weiteren Apps in der Richtlinie aus. Beim nächsten Aktualisieren des Anwendungsabschnitts der Richtlinie werden die gelöschten Apps automatisch entfernt.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Alle Microsoft-Apps",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Cloud-, Desktop- und mobile Apps von Microsoft zulassen (Vorschau)",
- "cloudappsSelectionBladeAllCloudapps": "Alle Cloud-Apps",
- "cloudappsSelectionBladeExcludeDescription": "Wählen Sie die Cloud-Apps aus, die von der Richtlinie ausgenommen werden sollen.",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Ausgeschlossene Cloud-Apps auswählen",
- "cloudappsSelectionBladeIncludeDescription": "Hiermit werden die Cloud-Apps ausgewählt, auf die die Richtlinie angewendet wird.",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Auswählen",
- "cloudappsSelectionBladeSelectedCloudapps": "Apps auswählen",
- "cloudappsSelectorInfoBallonText": "Dienste, auf die der Benutzer im Rahmen seiner Arbeit zugreift. Beispiel: \"Salesforce\"",
- "cloudappsSelectorPluralExcluded": "{0} ausgeschlossene Apps",
- "cloudappsSelectorPluralIncluded": "{0} enthaltene Apps",
- "cloudappsSelectorSingularExcluded": "1 App ausgeschlossen",
- "cloudappsSelectorSingularIncluded": "1 App enthalten",
- "cloudappsSelectorUserPlural": "{0} Apps",
- "cloudappsSelectorUserSingular": "1 App",
- "conditionLabelMulti": "{0} Bedingungen ausgewählt",
- "conditionLabelOne": "1 Bedingung ausgewählt",
- "conditionalAccessBladeTitle": "Bedingter Zugriff",
- "conditionsNotSelectedLabel": "Nicht konfiguriert",
- "conditionsReqMfaReauthSet": "Einige Optionen sind aufgrund der Zuweisung „Multi-Faktor-Authentifizierung erfordern“ und des derzeit ausgewählten Sitzungssteuerelements „Anmeldehäufigkeit jedes Mal“ nicht verfügbar.",
- "conditionsReqPwSet": "Aufgrund der derzeit ausgewählten Zuweisung \"Kennwortänderung anfordern\" sind einige Optionen nicht verfügbar.",
- "configureCasText": "Cloud App Security konfigurieren",
- "configureCustomControlsText": "Benutzerdefinierte Richtlinie konfigurieren",
- "controlLabelMulti": "{0} Steuerelemente ausgewählt",
- "controlLabelOne": "1 Steuerelement ausgewählt",
- "controlValidatorText": "Wählen Sie mindestens ein Steuerelement aus.",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Erfahren Sie mehr über die Anforderung konformer Geräte.",
- "controlsDeviceComplianceInfoBubble": "Das Gerät muss Intune-konform sein. Wenn das Gerät nicht kompatibel ist, wird der Benutzer aufgefordert, das Gerät unter Kompatibilität zu bringen.",
- "controlsDomainJoinedAriaLabel": "Erfahren Sie mehr über die Anforderung von in Microsoft Entra hybrid eingebundenen Geräten.",
- "controlsDomainJoinedInfoBubble": "Geräte müssen in Microsoft Entra hybrid eingebunden sein.",
- "controlsMamAriaLabel": "Erfahren Sie mehr über die Anforderung genehmigter Clientanwendungen.",
- "controlsMamInfoBubble": "Das Gerät muss diese genehmigten Clientanwendungen verwenden.",
- "controlsMfaInfoBubble": "Benutzer müssen zusätzliche Sicherheitsanforderungen erfüllen, z. B. Telefonanruf, SMS.",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Erfahren Sie mehr über das Anfordern von richtliniengeschützten Apps.",
- "controlsRequireCompliantAppInfoBubble": "Das Gerät muss durch Richtlinien geschützte Apps verwenden.",
- "controlsRequirePasswordResetAriaLabel": "Erfahren Sie mehr über das Anfordern einer Kennwortänderung.",
- "controlsRequirePasswordResetInfoBubble": "Zum Verringern des Benutzerrisikos ist eine Kennwortänderung erforderlich. Für diese Option wird außerdem die Multi-Faktor-Authentifizierung benötigt. Andere Steuerelemente können nicht verwendet werden.",
- "countriesRadiobuttonInfoBalloonContent": "Das Land/die Region, von der aus die Anmeldung erfolgt, wird über die IP-Adresse des Benutzers bestimmt.",
- "createNewVpnCert": "Neues Zertifikat",
- "createdTimeLabel": "Zeitpunkt der Erstellung",
- "customRoleLabel": "Benutzerdefinierte Rollen (nicht unterstützt)",
- "dateRangeTypeLabel": "Datumsbereich",
- "daysOfWeekPlaceholderText": "Wochentage filtern",
- "daysOfWeekTypeLabel": "Wochentage",
- "deletePolicyNoLicenseText": "Sie können diese Richtlinie jetzt löschen. Nach dem Löschen können Sie sie erst dann wiederherstellen, wenn Sie die erforderlichen Lizenzen besitzen.",
- "descriptionContentForControlsAndOr": "Für mehrere Steuerelemente",
- "devicePlatform": "Geräteplattform",
- "devicePlatformConditionHelpDescription": "Hiermit wird die Richtlinie auf ausgewählte Geräteplattformen angewendet.\n[Weitere Informationen][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} eingeschlossen",
- "devicePlatformIncludeExclude": "\"{0}\" und \"{1}\" ausgeschlossen",
- "devicePlatformNoSelectionError": "Für die Auswahl von Geräteplattformen muss ein untergeordnetes Element ausgewählt werden.",
- "devicePlatformsNone": "Kein",
- "deviceSelectionBladeExcludeDescription": "Wählen Sie die Plattformen aus, die von der Richtlinie ausgenommen werden sollen.",
- "deviceSelectionBladeIncludeDescription": "Hiermit werden die Geräteplattformen ausgewählt, auf die diese Richtlinie angewendet werden soll.",
- "deviceStateAll": "Alle Gerätezustände",
- "deviceStateCompliant": "Gerät als konform markiert",
- "deviceStateCompliantInfoContent": "Mit Intune konforme Geräte werden von der Auswertung dieser Richtlinie ausgeschlossen. Wenn die Richtlinie z. B. den Zugriff blockiert, werden alle Geräte mit Ausnahme derjenigen blockiert, die mit Intune konform sind.",
- "deviceStateConditionConfigureInfoContent": "Richtlinienkonfiguration basierend auf Gerätezustand",
- "deviceStateConditionSelectorInfoContent": "Gibt an, ob das Gerät, von dem sich der Benutzer anmeldet, ein \"In Microsoft Entra hybrid eingebundenes Gerät\" oder \"als konform markiert\" ist.\n Dies ist veraltet. Verwenden Sie stattdessen \"{1}\".",
- "deviceStateConditionSelectorLabel": "Gerätestatus (veraltet)",
- "deviceStateDomainJoined": "In Microsoft Entra hybrid eingebundenes Gerät",
- "deviceStateDomainJoinedInfoContent": "In Microsoft Entra hybrid eingebundene Geräte werden von der Auswertung dieser Richtlinie ausgeschlossen. Wenn die Richtlinie beispielsweise den Zugriff blockiert, werden alle Geräte mit Ausnahme von in Microsoft Entra hybrid eingebundenen Geräten blockiert.",
- "deviceStateDomainJoinedInfoLinkText": "Weitere Informationen.",
- "deviceStateExcludeDescription": "Hiermit wird der Gerätezustand zum Ausschließen von Geräten von dieser Richtlinie ausgewählt.",
- "deviceStateIncludeAndExcludeOneLabel": "{0}, ausschließen: {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0}, ausschließen: {1}, {2}",
- "directoryRoleInfoContent": "Weisen Sie integrierten Verzeichnisrollen eine Richtlinie zu.",
- "directoryRolesLabel": "Verzeichnisrollen",
- "discardbutton": "Verwerfen",
- "downloadDefaultFileName": "IP-Bereiche",
- "downloadExampleFileName": "Beispiel",
- "downloadExampleHeader": "Dies ist eine Beispieldatei zu den akzeptierten Datentypen. Zeilen, die mit # beginnen, werden ignoriert.",
- "duplicate": "Duplizieren",
- "duplicatePolicyName": "{0} KOPIEREN",
- "endDatePickerLabel": "Endet",
- "endTimePickerLabel": "Endzeit",
- "enterCountryText": "IP-Adresse und Land/Region werden als Paar ausgewertet. Wählen Sie das Land aus.",
- "enterIpText": "IP-Adresse und Land/Region werden zusammen ausgewertet. Geben Sie die IP-Adresse ein.",
- "enterUserText": "Kein Benutzer ausgewählt. Wählen Sie einen Benutzer aus.",
- "evaluationResult": "Auswertungsergebnis",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Nur Exchange ActiveSync mit unterstützten Plattformen",
- "excludeAllTrustedLocationSelectorText": "Alle vertrauenswürdigen Standorte",
- "featureRequiresP2": "Für dieses Feature ist eine Microsoft Entra ID P2-Lizenz erforderlich.",
- "friday": "Freitag",
- "grantControls": "Steuerelemente zur Rechteerteilung",
- "gridNetworkTrusted": "Vertrauenswürdig",
- "gridPolicyCreatedDateTime": "Erstellungsdatum",
- "gridPolicyEnabled": "Aktiviert",
- "gridPolicyModifiedDateTime": "Änderungsdatum",
- "gridPolicyName": "Richtlinienname",
- "gridPolicyState": "Zustand",
- "groupSelectionBladeExcludeDescription": "Hiermit werden die Gruppen ausgewählt, die von der Richtlinie ausgenommen werden sollen.",
- "groupSelectionBladeExcludedSelectorTitle": "Ausgeschlossene Gruppen auswählen",
- "groupSelectionBladeSelect": "Gruppen auswählen",
- "groupSelectorInfoBallonText": "Gruppen im Verzeichnis, auf das die Richtlinie angewendet wird. Beispiel: \"Pilotgruppe\"",
- "groupsSelectionBladeTitle": "Gruppen",
- "helpCommonScenariosText": "Möchten Sie einige gängige Szenarien kennenlernen?",
- "helpCondition1": "Wenn sich ein beliebiger Benutzer außerhalb des Unternehmensnetzwerks befindet",
- "helpCondition2": "Wenn sich Benutzer der Gruppe \"Manager\" anmelden",
- "helpConditionsTitle": "Bedingungen",
- "helpControl1": "Sie müssen sich unter Verwendung der Multi-Faktor-Authentifizierung anmelden.",
- "helpControl2": "Sie müssen sich auf einem Intune-kompatiblen oder auf einem in die Domäne eingebundenen Gerät befinden.",
- "helpControlsTitle": "Steuerungen",
- "helpIntroText": "Über den bedingten Zugriff können Sie Zugriffsanforderungen erzwingen, wenn bestimmte Bedingungen erfüllt sind. Hier einige Beispiele:",
- "helpIntroTitle": "Was ist bedingter Zugriff?",
- "helpLearnMoreText": "Möchten Sie mehr über den bedingten Zugriff erfahren?",
- "helpStartStep1": "Erstellen Sie Ihre erste Richtlinie, indem Sie auf \"+ Neue Richtlinie\" klicken.",
- "helpStartStep2": "Geben Sie Richtlinienbedingungen und -steuerelemente an.",
- "helpStartStep3": "Wenn Sie fertig sind, vergessen Sie nicht, die Richtlinie zu aktivieren und auf \"Erstellen\" zu klicken.",
- "helpStartTitle": "Erste Schritte",
- "highRisk": "Hoch",
- "includeAndExcludeAppsTextFormat": "Einschließen: {0}. Ausschließen: {1}.",
- "includeAppsTextFormat": "Einschließen: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Unbekannte Bereiche sind IP-Adressen, die keinem Land/keiner Region zugeordnet werden können.",
- "includeUnknownAreasCheckboxLabel": "Unbekannte Bereiche einschließen",
- "infoCommandLabel": "Info",
- "invalidCertDuration": "Ungültige Zertifikatdauer.",
- "invalidIpAddress": "Der Wert muss eine gültige IP-Adresse sein.",
- "invalidReAuthSignInRiskOptionSelected": "Die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ lässt die Auswahl „Kein Risiko“ im Bedingungssteuerelement „Anmelderisiko“ nicht zu.",
- "invalidUriErrorMsg": "Geben Sie einen gültigen URI an. Beispiel: uri:contoso.com:acr ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Alle laden",
- "loading": "Wird geladen...",
- "locationConfigureNamedLocationsText": "Alle vertrauenswürdigen Standorte konfigurieren",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Der Name der Richtlinie ist zu lang. Er darf maximal 256 Zeichen umfassen.",
- "locationSelectionBladeExcludeDescription": "Wählen Sie die Standorte aus, die von der Richtlinie ausgenommen werden sollen.",
- "locationSelectionBladeIncludeDescription": "Hiermit werden die Standorte ausgewählt, die in diese Richtlinie eingeschlossen werden sollen.",
- "locationsAllLocationsLabel": "Alle Standorte",
- "locationsAllNamedLocationsLabel": "Alle vertrauenswürdigen IPs",
- "locationsAllPrivateLinksLabel": "Alle Private Link-Instanzen in meinem Mandanten",
- "locationsIncludeExcludeLabel": "\"{0}\" und alle vertrauenswürdigen IPs ausschließen",
- "locationsSelectedPrivateLinksLabel": "Ausgewählte Private Link-Instanzen",
- "lowRisk": "Niedrig",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "Zum Verwalten von Richtlinien für bedingten Zugriff benötigt Ihre Organisation Microsoft Entra P1 oder P2.",
- "manageSecurityDefaultsAriaLabel": "Einstellungen für Sicherheitsstandards verwalten",
- "markAsTrustedCheckboxInfoBalloonContent": "Durch die Anmeldung von einem vertrauenswürdigen Standort aus wird das Benutzeranmelderisiko verringert. Markieren Sie diesen Standort nur dann als vertrauenswürdig, wenn die eingegebenen IP-Bereiche bekannt sind und in Ihrer Organisation als unbedenklich eingestuft werden.",
- "markAsTrustedCheckboxLabel": "Als vertrauenswürdigen Standort markieren",
- "mediumRisk": "Mittel",
- "memberSelectionCommandRemove": "Entfernen",
- "menuItemClaimProviderControls": "Benutzerdefinierte Steuerelemente (Vorschau)",
- "menuItemClassicPolicies": "Klassische Richtlinien",
- "menuItemInsightsAndReporting": "Insights und Berichterstellung",
- "menuItemManage": "Verwalten",
- "menuItemNamedLocationsPreview": "Benannte Standorte (Vorschau)",
- "menuItemNamedNetworks": "Benannte Standorte",
- "menuItemPolicies": "Richtlinien",
- "menuItemTermsOfUse": "Nutzungsbedingungen",
- "modifiedTimeLabel": "Zeitpunkt der Änderung",
- "monday": "Montag",
- "nameLabel": "Name",
- "namedLocationCountryInfoBanner": "Nur IPv4-Adressen werden Ländern/Regionen zugeordnet. IPv6-Adressen werden bei unbekannten Ländern/Regionen einbezogen.",
- "namedLocationTypeCountry": "Länder/Regionen",
- "namedLocationTypeLabel": "Standort definieren über:",
- "namedLocationUpsellBanner": "Diese Ansicht ist veraltet. Wechseln Sie zur neuen und verbesserten Ansicht \"Benannte Standorte\".",
- "namedLocationsHelpDescription": "Benannte Standorte werden von Microsoft Entra ID-Sicherheitsberichten verwendet, um falsch positive Ergebnisse und Microsoft Entra-Richtlinien für bedingten Zugriff zu reduzieren.\n[Weitere Informationen] [1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Neuen IP-Adressbereich hinzufügen (Beispiel: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "Sie müssen mindestens ein Land/eine Region auswählen.",
- "namedNetworkDeleteCommand": "Löschen",
- "namedNetworkDeleteDescription": "Möchten Sie \"{0}\" löschen? Diese Aktion kann nicht rückgängig gemacht werden.",
- "namedNetworkDeleteTitle": "Sind Sie sicher?",
- "namedNetworkDownloadIpRange": "Herunterladen",
- "namedNetworkInvalidRange": "Der Wert muss ein gültiger IP-Bereich sein.",
- "namedNetworkIpRangeNeeded": "Sie benötigen mindestens einen gültigen IP-Bereich.",
- "namedNetworkIpRangesDescriptionContent": "Hiermit werden die IP-Adressbereiche für Ihre Organisation konfiguriert.",
- "namedNetworkIpRangesTab": "IP-Bereiche",
- "namedNetworkListAdd": "Neuer Standort",
- "namedNetworkListConfigureTrustedIps": "Konfigurieren von vertrauenswürdigen IP-Adressen für die Multi-Faktor-Authentifizierung",
- "namedNetworkNameDescription": "Beispiel: \"Büro Redmond\"",
- "namedNetworkNameInvalid": "Der angegebene Name ist ungültig.",
- "namedNetworkNameRequired": "Sie müssen einen Namen für diesen Standort angeben.",
- "namedNetworkNoIpRanges": "Keine IP-Bereiche",
- "namedNetworkNotificationCreateDescription": "Der Standort namens \"{0}\" wird erstellt.",
- "namedNetworkNotificationCreateFailedDescription": "Fehler beim Erstellen des Standorts \"{0}\". Versuchen Sie es später noch mal.",
- "namedNetworkNotificationCreateFailedTitle": "Fehler beim Erstellen des Standorts",
- "namedNetworkNotificationCreateSuccessDescription": "Der Standort namens \"{0}\" wurde erstellt.",
- "namedNetworkNotificationCreateSuccessTitle": "\"{0}\" wurde erstellt",
- "namedNetworkNotificationCreateTitle": "\"{0}\" wird erstellt",
- "namedNetworkNotificationDeleteDescription": "Der Standort namens \"{0}\" wird gelöscht.",
- "namedNetworkNotificationDeleteFailedDescription": "Fehler beim Löschen des Standorts \"{0}\". Versuchen Sie es später noch mal.",
- "namedNetworkNotificationDeleteFailedTitle": "Fehler beim Löschen des Standorts",
- "namedNetworkNotificationDeleteSuccessDescription": "Der Standort namens \"{0}\" wurde gelöscht.",
- "namedNetworkNotificationDeleteSuccessTitle": "\"{0}\" wurde gelöscht",
- "namedNetworkNotificationDeleteTitle": "\"{0}\" wird gelöscht.",
- "namedNetworkNotificationUpdateDescription": "Der Standort namens \"{0}\" wird aktualisiert.",
- "namedNetworkNotificationUpdateFailedDescription": "Fehler beim Aktualisieren des Standorts \"{0}\". Versuchen Sie es später noch mal.",
- "namedNetworkNotificationUpdateFailedTitle": "Fehler beim Aktualisieren des Standorts",
- "namedNetworkNotificationUpdateSuccessDescription": "Der Standort namens \"{0}\" wurde aktualisiert.",
- "namedNetworkNotificationUpdateSuccessTitle": "\"{0}\" wurde aktualisiert",
- "namedNetworkNotificationUpdateTitle": "\"{0}\" wird aktualisiert",
- "namedNetworkSearchPlaceholder": "Suche nach Standorten",
- "namedNetworkUploadFailedDescription": "Fehler beim Analysieren der angegebenen Datei. Stellen Sie sicher, dass eine Nur-Text-Datei hochgeladen wird, bei der jede Zeile das CIDR-Format aufweist.",
- "namedNetworkUploadFailedTitle": "Fehler beim Analysieren von \"{0}\"",
- "namedNetworkUploadInProgressDescription": "Es wird versucht, gültige CIDR-Werte aus \"{0}\" zu analysieren.",
- "namedNetworkUploadInProgressTitle": "\"{0}\" wird analysiert",
- "namedNetworkUploadInvalidDescription": "\"{0}\" ist entweder zu groß oder weist ein ungültiges Format auf.",
- "namedNetworkUploadInvalidTitle": "\"{0}\" ungültig",
- "namedNetworkUploadIpRange": "Hochladen",
- "namedNetworkUploadSuccessDescription": "{0} Zeilen wurden analysiert. {1} weisen ein ungültiges Format auf. {2} wurden übersprungen.",
- "namedNetworkUploadSuccessTitle": "Analyse von \"{0}\" beendet",
- "namedNetworksAdd": "Neuer benannter Standort",
- "namedNetworksConditionHelpDescription": "Hiermit steuern Sie den Benutzerzugriff basierend auf dem physischen Standort.\n[Weitere Informationen][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "\"{0}\" und \"{1}\" ausgeschlossen",
- "namedNetworksHelpDescription": "Benannte Standorte werden von Microsoft Entra ID-Sicherheitsberichten verwendet, um die Anzahl von falsch positiven Ergebnissen und von Microsoft Entra-Richtlinien für bedingten Zugriff zu verringern.\n[Weitere Informationen][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} eingeschlossen",
- "namedNetworksNone": "Keine benannten Standorte gefunden.",
- "namedNetworksTitle": "Standorte konfigurieren",
- "namednetworkExceedingSizeErrorBladeTitle": "Fehlerdetails",
- "namednetworkExceedingSizeErrorDetailText": "Klicken Sie hier, um weitere Informationen zu erhalten.",
- "namednetworkExceedingSizeErrorMessage": "Sie haben den maximal zulässigen Speicher für benannte Standorte überschritten. Versuchen Sie es mit einer kürzeren Liste. Klicken Sie hier, um weitere Details anzuzeigen.",
- "needMfaSecondary": "„Multi-Faktor-Authentifizierung erfordern“ muss ausgewählt sein, wenn „Anmeldehäufigkeit jedes Mal“ mit „Nur sekundäre Authentifizierungsmethoden“ ausgewählt ist.",
- "needMfaSpecificApps": "„Die „Anmeldehäufigkeit jedes Mal“ für die Sitzungssteuerung erfordert die Zuweisungssteuerung „Multi-Faktor-Authentifizierung erforderlich“, wenn speziell unterstützte Apps ausgewählt werden",
- "newCertName": "Neues Zertifikat",
- "noAttributePermissionsError": "Unzureichende Berechtigungen zum Erstellen oder Aktualisieren der Richtlinie. Die Rolle „Attributdefinitionsleser“ ist erforderlich, um dynamische Filter hinzuzufügen/zu bearbeiten.",
- "noPolicyRowMessage": "Keine Richtlinien",
- "noSPSelected": "Kein Dienstprinzipal ausgewählt",
- "noUpdatePermissionMessage": "Sie sind nicht berechtigt, diese Einstellungen zu aktualisieren. Wenden Sie sich an den globalen Administrator, um Zugriff zu erhalten.",
- "noUserSelected": "Kein Benutzer ausgewählt.",
- "noneRisk": "Kein Risiko",
- "office365Description": "Zu diesen Apps gehören Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer und andere.",
- "office365InfoBox": "Mindestens eine der ausgewählten Apps ist Teil von Office 365. Es wird empfohlen, die Richtlinie stattdessen für die Office 365-App festzulegen.",
- "oneUserSelected": "1 Benutzer ausgewählt",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Nur globale Administratoren können diese Richtlinie speichern.",
- "or": "{0} ODER {1}",
- "pickerDoneCommand": "Fertig",
- "policiesBladeAdPremiumUpsellBannerText": "Erstellen Sie Ihre eigenen Richtlinien, und bearbeiten Sie spezifische Bedingungen wie Cloud-Apps, Anmelderisiken und Geräteplattformen mit Microsoft Entra ID Premium.",
- "policiesBladeTitle": "Richtlinien",
- "policiesBladeTitleWithAppName": "Richtlinien: {0}",
- "policiesDisabledBannerText": "Das Erstellen und Bearbeiten von Richtlinien ist für Anwendungen mit einem Attribut für die Anmeldung per Link untersagt.",
- "policiesHitMaxLimitStatusBarMessage": "Sie haben die maximale Anzahl von Richtlinien für diesen Mandanten erreicht. Löschen Sie einige Richtlinien, um weitere Richtlinien erstellen zu können.",
- "policyAssignmentsSection": "Zuweisungen",
- "policyBlockAllInfoBox": "Die konfigurierte Richtlinie blockiert alle Benutzer und wird daher nicht unterstützt. Überprüfen Sie die Zuweisungen und Steuerelemente. Schließen Sie den aktuellen Benutzer ({0}) aus, wenn Sie diese Richtlinie speichern möchten.",
- "policyCloudAppsDisplayTextAllApp": "Alle Apps",
- "policyCloudAppsLabel": "Cloud-Apps",
- "policyConditionClientAppDescription": "Software, die der Benutzer zum Zugriff auf die Cloud-App verwendet. Beispiel: \"Browser\"",
- "policyConditionClientAppV2Description": "Software, die der Benutzer zum Zugriff auf die Cloud-App verwendet. Beispiel: \"Browser\"",
- "policyConditionDevicePlatform": "Geräteplattformen",
- "policyConditionDevicePlatformDescription": "Die Plattform, von der aus sich der Benutzer anmeldet. Beispiel: \"iOS\"",
- "policyConditionLocation": "Standorte",
- "policyConditionLocationDescription": "Der Standort (ermittelt über den IP-Adressbereich), von dem aus sich der Benutzer anmeldet",
- "policyConditionLocationPreview": "Standorte (Vorschau)",
- "policyConditionSigninRisk": "Anmelderisiko",
- "policyConditionSigninRiskDescription": "Die Wahrscheinlichkeit, dass die Anmeldung von einer anderen Person als dem Benutzer stammt. Die Risikostufe kann \"Hoch\", \"Mittel\" oder \"Niedrig\" lauten. Erfordert eine Microsoft Entra ID P2-Lizenz.",
- "policyConditionUserRisk": "Benutzerrisiko",
- "policyConditionUserRiskDescription": "Hiermit konfigurieren Sie die Benutzerrisikostufen, die für die Erzwingung der Richtlinie erforderlich sind.",
- "policyConditioniClientApp": "Client-Apps",
- "policyControlAllowAccessDisplayedName": "Zugriff gewähren",
- "policyControlAuthenticationStrengthDisplayedName": "Authentifizierungsstärke erforderlich (Vorschau)",
- "policyControlBladeTitle": "Gewähren",
- "policyControlBlockAccessDisplayedName": "Blockzugriff",
- "policyControlCompliantDeviceDisplayedName": "Markieren des Geräts als kompatibel erforderlich",
- "policyControlContentDescription": "Steuern Sie die Zugriffserzwingung, um den Zugriff zu blockieren oder zu gewähren.",
- "policyControlInfoBallonText": "Blockieren Sie den Zugriff, oder wählen Sie zusätzliche Anforderungen aus, die für eine Zugriffserteilung erfüllt sein müssen.",
- "policyControlMfaChallengeDisplayedName": "Multi-Faktor-Authentifizierung erfordern",
- "policyControlRequireCompliantAppDisplayedName": "App-Schutzrichtlinie erforderlich",
- "policyControlRequireDomainJoinedDisplayedName": "In Microsoft Entra hybrid eingebundenes Gerät erforderlich",
- "policyControlRequireMamDisplayedName": "Genehmigte Client-App erforderlich",
- "policyControlRequiredPasswordChangeDisplayedName": "Kennwortänderung anfordern",
- "policyControlSelectAuthStrength": "Authentifizierungsstärke erforderlich",
- "policyControlsNoControlsSelected": "0 Steuerelemente ausgewählt",
- "policyControlsSection": "Zugriffskontrollen",
- "policyCreatBladeTitle": "Neu",
- "policyCreateButton": "Erstellen",
- "policyCreateFailedMessage": "Fehler: {0}",
- "policyCreateFailedTitle": "Fehler beim Erstellen von \"{0}\"",
- "policyCreateInProgressTitle": "\"{0}\" wird erstellt",
- "policyCreateSuccessMessage": "\"{0}\" wurde erfolgreich erstellt. Die Richtlinie wird in wenigen Minuten aktiviert, wenn Sie \"Richtlinie aktivieren\" auf \"Ein\" festgelegt haben.",
- "policyCreateSuccessTitle": "\"{0}\" erfolgreich erstellt",
- "policyDeleteConfirmation": "Möchten Sie \"{0}\" löschen? Diese Aktion kann nicht rückgängig gemacht werden.",
- "policyDeleteFailTitle": "Fehler beim Löschen von \"{0}\".",
- "policyDeleteInProgressTitle": "\"{0}\" wird gelöscht.",
- "policyDeleteSuccessTitle": "\"{0}\" wurde erfolgreich gelöscht.",
- "policyEnforceLabel": "Richtlinie aktivieren",
- "policyErrorCannotSetSigninRisk": "Sie haben keine Berechtigung zum Speichern einer Richtlinie mit einer Bedingung zum Anmelderisiko.",
- "policyErrorNoPermission": "Sie haben keine Berechtigung zum Speichern der Richtlinie. Wenden Sie sich an Ihren globalen Administrator.",
- "policyErrorUnknown": "Es ist ein Fehler aufgetreten. Versuchen Sie es später noch mal.",
- "policyFallbackWarningMessage": "Fehler beim Erstellen oder Aktualisieren von \"{0}\" mithilfe von MS Graph. Es wurde ein Fallback auf AD Graph durchgeführt. Untersuchen Sie das folgende Szenario, weil höchstwahrscheinlich ein Fehler beim Aufrufen des Richtlinienendpunkts für MS Graph mit einer inkompatiblen Bedingung vorliegt.",
- "policyFallbackWarningTitle": "\"{0}\" teilweise erfolgreich erstellt oder aktualisiert",
- "policyNameCannotBeEmpty": "Der Richtlinienname darf nicht leer sein.",
- "policyNameDevice": "Geräterichtlinie",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Richtlinie für die Verwaltung mobiler Apps",
- "policyNameMfaLocation": "Multi-Faktor-Authentifizierung und Standortrichtlinie",
- "policyNamePlaceholderText": "Beispiel: \"App-Richtlinie zur Gerätekompatibilität\"",
- "policyNameTooLongError": "Der Name der Richtlinie ist zu lang. Der Name darf maximal 256 Zeichen umfassen.",
- "policyOff": "Aus",
- "policyOn": "Ein",
- "policyReportOnly": "Nur Bericht",
- "policyReviewSection": "Überprüfung",
- "policySaveButton": "Speichern",
- "policyStatusIconDescription": "Die Richtlinie ist aktiviert.",
- "policyStatusIconEnabled": "Symbol für den Status \"Aktiviert\"",
- "policyTemplateName1": "Von der App erzwungene Einschränkungen für den Browserzugriff durch {0} verwenden",
- "policyTemplateName2": "Zugriff durch {0} nur auf verwalteten Geräten zulassen",
- "policyTemplateName3": "Die Richtlinie wurde aus den Einstellungen für die fortlaufende Zugriffsevaluierung migriert.",
- "policyTriggerRiskSpecific": "Bestimmte Risikostufe auswählen",
- "policyTriggersInfoBalloonText": "Diese Bedingungen definieren die Anwendung der Richtlinie. Beispiel \"Standort\".",
- "policyTriggersNoConditionsSelected": "0 Bedingungen ausgewählt",
- "policyTriggersSelectorLabel": "Bedingungen",
- "policyUpdateFailedMessage": "Fehler: {0}",
- "policyUpdateFailedTitle": "Fehler beim Aktualisieren von \"{0}\".",
- "policyUpdateInProgressTitle": "\"{0}\" wird aktualisiert.",
- "policyUpdateSuccessMessage": "\"{0}\" wurde erfolgreich aktualisiert. Die Richtlinie wird in wenigen Minuten aktiviert, wenn Sie \"Richtlinie aktivieren\" auf \"Ein\" festgelegt haben.",
- "policyUpdateSuccessTitle": "\"{0}\" wurde erfolgreich aktualisiert.",
- "primaryCol": "Primär",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "Modus \"Nur Bericht\": Richtlinien werden bei der Anmeldung ausgewertet und protokolliert, beeinträchtigen die Benutzer aber nicht.",
- "requireAllControlsText": "Alle ausgewählten Kontrollen anfordern",
- "requireCompliantDevice": "Erfordert kompatibles Gerät",
- "requireDomainJoined": "In Domäne eingebundenes Gerät erforderlich",
- "requireGrantReauth": "Die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ erfordert eine Zuweisungssteuerung „Multi-Faktor-Authentifizierung erfordern“ oder „Kennwortänderung erfordern“, wenn „Alle Cloud-Apps“ ausgewählt ist.",
- "requireMFA": "Multi-Faktor-Authentifizierung erfordern",
- "requireMfaReauth": "Für die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ muss die Zuweisungssteuerung „Multi-Faktor-Authentifizierung erfordern“ für „Anmelderisiko“ erteilt werden.",
- "requireOneControlText": "Eine der ausgewählten Steuerungen anfordern",
- "requirePasswordChangeReauth": "Für die Sitzungssteuerung \"Anmeldehäufigkeit jedes Mal\" ist die Berechtigung \"Kennwortänderung erforderlich\" für \"Benutzerrisiko\" erforderlich.",
- "requireRiskReauth": "Für die Sitzungssteuerung \"Anmeldehäufigkeit jedes Mal\" ist das Sitzungssteuerelement \"Benutzerrisiko\" oder \"Anmelderisiko\" erforderlich, wenn \"Alle Cloud-Apps\" ausgewählt ist.",
- "requireRiskReauthRiskNotEnabled": "Das Sitzungssteuerelement \"Anmeldehäufigkeit jedes Mal\" ist nicht verfügbar, wenn \"Alle Cloud-Apps\" ausgewählt ist.",
- "requireRiskReauthSignInOnly": "Das Sitzungssteuerelement \"Anmeldehäufigkeit jedes Mal\" erfordert das Sitzungssteuerelement \"Anmelderisiko\", wenn \"Alle Cloud-Apps\" ausgewählt ist.",
- "requireRiskReauthUserOnly": "Das Sitzungssteuerelement \"Anmeldehäufigkeit jedes Mal\" erfordert die Sitzungssteuerung \"Benutzerrisiko\", wenn \"alle Cloud-Apps\" ausgewählt ist.",
- "resetFilters": "Filter zurücksetzen",
- "sPRequired": "Dienstprinzipal ist erforderlich",
- "sPSelectorInfoBalloon": "Benutzer oder Dienstprinzipal, den Sie testen möchten",
- "saturday": "Samstag",
- "searchTextTooLongError": "Der Suchtext ist zu lang. Es sind maximal 256 Zeichen zulässig.",
- "securityDefaultsPolicyName": "Sicherheitsstandards",
- "securityDefaultsTextMessage": "Die Sicherheitsstandards müssen deaktiviert sein, um Richtlinie für bedingten Zugriff zu aktivieren.",
- "securityDefaultsUpdateInProgressText": "Ein Sicherheitsupdate wird ausgeführt. Warten Sie einen Moment, und versuchen Sie es noch mal.",
- "securityDefaultsWarningMessage": "Anscheinend sind Sie im Begriff, die Sicherheitskonfigurationen Ihrer Organisation zu verwalten. Das ist großartig! Sie müssen vor dem Aktivieren einer Richtlinie für bedingten Zugriff zunächst die {0}Sicherheitsstandards deaktivieren{1}.",
- "selectDevicePlatforms": "Geräteplattformen auswählen",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Speicherorte auswählen",
- "selectedSP": "Ausgewählter Dienstprinzipal",
- "servicePrincipalBladeExcludedSelectorTitle": "Ausgeschlossene Dienstprinzipale auswählen",
- "servicePrincipalBladeIncludedSelectorTitle": "Dienstprinzipale auswählen",
- "servicePrincipalDataGridAria": "Liste der verfügbaren Dienstprinzipale",
- "servicePrincipalDropDownLabel": "Wofür gilt diese Richtlinie?",
- "servicePrincipalInfoBox": "Einige Bedingungen sind aufgrund der Auswahl von „{0}“ in der Richtlinienzuweisung nicht verfügbar.",
- "servicePrincipalRadioAll": "Alle eigenen Dienstprinzipale",
- "servicePrincipalRadioSelect": "Dienstprinzipale auswählen",
- "servicePrincipalSelectionsAria": "Raster für ausgewählte Dienstprinzipale",
- "servicePrincipalSelectorAria": "Liste der ausgewählten Dienstprinzipale",
- "servicePrincipalSelectorMultiple": "{0} Dienstprinzipale ausgewählt",
- "servicePrincipalSelectorSingle": "1 Dienstprinzipal ausgewählt",
- "servicePrincipalSpecificExc": "Bestimmte Dienstprinzipale ausgeschlossen",
- "servicePrincipalSpecificInc": "Bestimmte eingeschlossene Dienstprinzipale",
- "servicePrincipals": "Dienstprinzipal",
- "sessionControlBladeTitle": "Sitzung",
- "sessionControlDescriptionContent": "Steuern Sie den Zugriff basierend auf Sitzungssteuerelementen, um in bestimmten Cloudanwendungen eine eingeschränkte Funktionalität zu ermöglichen.",
- "sessionControlDisableInfo": "Dieses Steuerelement kann nur mit unterstützten Apps eingesetzt werden. Aktuell sind Office 365, Exchange Online und SharePoint Online die einzigen Cloud-Apps, die von der App erzwungene Einschränkungen unterstützen. Klicken Sie hier, um weitere Informationen zu erhalten.",
- "sessionControlInfoBallonText": "Sitzungssteuerelemente sorgen für eingeschränkte Interaktionsmöglichkeiten innerhalb einer Cloud-App.",
- "sessionControls": "Sitzungskontrollen",
- "sessionControlsAppEnforcedLabel": "Von der App erzwungene Einschränkungen verwenden",
- "sessionControlsCasLabel": "App-Steuerung für bedingten Zugriff verwenden",
- "sessionControlsSecureSignInLabel": "Tokenbindung erforderlich",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} eingeschlossen",
- "signinRiskReauth": "Die Bedingung „Anmelderisiko“ muss ausgewählt werden, wenn die Zuweisung „Multi-Faktor-Authentifizierung erfordern“ und die Sitzungssteuerung „Anmeldehäufigkeit jedes Mal“ ausgewählt sind.",
- "signinRiskTriggerDescriptionContent": "Stufe für Anmelderisiko auswählen",
- "singleTenantServicePrincipalInfoBallonText": "Die Richtlinie gilt nur für Dienstprinzipale mit einem einzelnen Mandanten, die sich im Besitz Ihrer Organisation befinden. Klicken Sie hier, um weitere Informationen zu erhalten. ",
- "specificSigninRiskLevelsOption": "Spezifische Risikostufen für die Anmeldung auswählen",
- "specificUsersExcluded": "bestimmte Benutzer ausgeschlossen",
- "specificUsersIncluded": "Bestimmte Benutzer eingeschlossen",
- "specificUsersIncludedAndExcluded": "Bestimmte Benutzer ausgeschlossen und eingeschlossen",
- "startDatePickerLabel": "Startet",
- "startFreeTrial": "Kostenlose Testversion starten",
- "startTimePickerLabel": "Startzeit",
- "sunday": "Sonntag",
- "testButton": "What If",
- "thumbprintCol": "Fingerabdruck",
- "thursday": "Donnerstag",
- "timeConditionAllTimesLabel": "Beliebige Zeit",
- "timeConditionIntroText": "Hiermit werden die Zeiten für die Anwendung dieser Richtlinie ausgewählt.",
- "timeConditionSelectorInfoBallonContent": "Zeitraum, in dem sich der Benutzer anmeldet. Beispiel: \"Mittwoch, 9:00–17:00 Uhr PST\".",
- "timeConditionSelectorLabel": "Zeit (Vorschau)",
- "timeConditionSpecificLabel": "Bestimmte Zeiten",
- "timeSelectorAllTimesText": "Beliebige Zeit",
- "timeSelectorSpecificTimesText": "Bestimmte Zeiten konfiguriert",
- "timeZoneDropdownInfoBalloonContent": "Wählen Sie eine Zeitzone aus, die den Zeitbereich definiert. Diese Richtlinie gilt für Benutzer in allen Zeitzonen. Beispiel: Der Zeitraum \"Mittwoch, 9:00–17:00 Uhr\", der für einen Benutzer in einer bestimmten Zeitzone gilt, entspricht für einen anderen Benutzer in einer anderen Zeitzone dem Zeitraum \"Mittwoch, 10:00–18:00 Uhr\".",
- "timeZoneDropdownLabel": "Zeitzone",
- "timeZoneDropdownPlaceholderText": "Zeitzone auswählen",
- "tooManyPoliciesDescription": "Es werden nur die ersten 50 Richtlinien angezeigt. Klicken Sie hier, um alle Richtlinien anzuzeigen.",
- "tooManyPoliciesTitle": "Mehr als 50 Richtlinien gefunden",
- "trustedLocationStatusIconDescription": "Standort ist vertrauenswürdig",
- "trustedLocationStatusIconEnabled": "Symbol für vertrauenswürdigen Status",
- "tuesday": "Dienstag",
- "uploadInBadState": "Die angegebene Datei kann nicht hochgeladen werden.",
- "upsellAppsDescription": "Erfordert in allen Fällen oder nur von außerhalb des Unternehmensnetzwerks eine Multi-Faktor-Authentifizierung für sensible Anwendungen.",
- "upsellAppsTitle": "Sichere Anwendungen",
- "upsellBannerText": "Holen Sie sich die kostenlose Premium-Testversion, um dieses Feature zu verwenden.",
- "upsellDataDescription": "Für den Zugriff auf Unternehmensressourcen ist die Markierung des Geräts als „konform“ oder „in Microsoft Entra hybrid eingebundenes Gerät“ erforderlich.",
- "upsellDataTitle": "Sichere Daten",
- "upsellDescription": "Der bedingte Zugriff bietet genau den Grad an Kontrolle und Schutz, den Sie zur Absicherung Ihrer Unternehmensdaten benötigen. Gleichzeitig wird gewährleistet, dass Ihre Benutzer bestmöglich von einem beliebigen Gerät aus ihre Arbeit erledigen können. Beispielsweise können Sie den Zugriff von außerhalb des Unternehmensnetzwerks einschränken oder den Zugriff auf Geräte beschränken, die den Kompatibilitätsrichtlinien entsprechen.",
- "upsellRiskDescription": "Erfordert eine Multi-Faktor-Authentifizierung für Risikoereignisse, die vom Microsoft Machine Learning-System erkannt werden.",
- "upsellRiskTitle": "Risikoschutz",
- "upsellTitle": "Bedingter Zugriff",
- "upsellWhyTitle": "Was spricht für die Verwendung des bedingten Zugriffs?",
- "userAppNoneOption": "Kein",
- "userNamePlaceholderText": "Benutzernamen eingeben",
- "userNotSetSeletorLabel": "0 Benutzer und Gruppen ausgewählt",
- "userOnlySelectionBladeExcludeDescription": "Wählen Sie die Benutzer aus, die von der Richtlinie ausgenommen werden sollen.",
- "userOrGroupSelectionCountDiffBannerText": "{0}, die in dieser Richtlinie konfiguriert sind, wurden aus dem Verzeichnis gelöscht. Dies wirkt sich jedoch nicht auf die weiteren Benutzer und Gruppen in der Richtlinie aus. Beim nächsten Aktualisieren der Richtlinie werden die gelöschten Benutzer und/oder Gruppen automatisch entfernt.",
- "userOrSPNotSetSelectorLabel": "0 Benutzer- oder Workloadidentitäten ausgewählt",
- "userOrSPSelectionBladeTitle": "Benutzer- oder Workloadidentitäten",
- "userOrSPSelectorInfoBallonText": "Identitäten im Verzeichnis, für das die Richtlinie gilt, einschließlich Benutzer, Gruppen und Dienstprinzipale",
- "userRequired": "Benutzer erforderlich",
- "userRiskErrorBox": "Die Bedingung \"Benutzerrisiko\" muss ausgewählt werden, wenn die Zuweisung \"Kennwortänderung anfordern\" ausgewählt ist.",
- "userRiskReauth": "Die Bedingung \"Benutzerrisiko\" und nicht \"Anmelderisiko\" muss ausgewählt werden, wenn die Zuweisung \"Kennwortänderung erforderlich\" und die Sitzungssteuerung \"Anmeldehäufigkeit jedes Mal anfordern\" ausgewählt sind.",
- "userSPRequired": "Benutzer oder Dienstprinzipal ist erforderlich",
- "userSPSelectorTitle": "Benutzer- oder Workloadidentität",
- "userSelectionBladeAllUsersAndGroups": "Alle Benutzer und Gruppen",
- "userSelectionBladeExcludeDescription": "Wählen Sie die Benutzer und Gruppen aus, die von der Richtlinie ausgenommen werden sollen.",
- "userSelectionBladeExcludeTabTitle": "Ausschließen",
- "userSelectionBladeExcludedSelectorTitle": "Ausgeschlossene Benutzer und Gruppen auswählen",
- "userSelectionBladeIncludeDescription": "Hiermit werden die Benutzer ausgewählt, auf die diese Richtlinie angewendet wird.",
- "userSelectionBladeIncludeTabTitle": "Einschließen",
- "userSelectionBladeIncludedSelectorTitle": "Auswählen",
- "userSelectionBladeSelectUsers": "Benutzer auswählen",
- "userSelectionBladeSelectedUsers": "Benutzer und Gruppen auswählen",
- "userSelectionBladeTitle": "Benutzer und Gruppen",
- "userSelectorBladeTitle": "Benutzer",
- "userSelectorExcluded": "{0} ausgeschlossen",
- "userSelectorGroupPlural": "{0} Gruppen",
- "userSelectorGroupSingular": "1 Gruppe",
- "userSelectorIncluded": "{0} eingeschlossen",
- "userSelectorInfoBallonText": "Benutzer und Gruppen im Verzeichnis, auf die die Richtlinie angewendet wird. Beispiel: \"Pilotgruppe\"",
- "userSelectorSelected": "{0} ausgewählt",
- "userSelectorTitle": "Benutzer",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} Benutzer",
- "userSelectorUserSingular": "1 Benutzer",
- "userSelectorWithExclusion": "{0} und {1}",
- "usersGroupsLabel": "Benutzer und Gruppen",
- "viewApprovedAppsText": "Liste der genehmigten Client-Apps anzeigen",
- "viewCompliantAppsText": "Liste der durch Richtlinien geschützten Client-Apps anzeigen",
- "viewPolicyInformation": "Richtlinieninformationen anzeigen",
- "vpnBladeTitle": "VPN-Konnektivität",
- "vpnCertCreateFailedMessage": "Fehler: {0}",
- "vpnCertCreateFailedTitle": "Fehler beim Erstellen von {0}.",
- "vpnCertCreateInProgressTitle": "{0} wird erstellt.",
- "vpnCertCreateSuccessMessage": "\"{0}\" wurde erfolgreich erstellt.",
- "vpnCertCreateSuccessTitle": "\"{0}\" wurde erfolgreich erstellt.",
- "vpnCertNoRowsMessage": "Keine VPN-Zertifikate gefunden.",
- "vpnCertUpdateFailedMessage": "Fehler: {0}",
- "vpnCertUpdateFailedTitle": "Fehler beim Aktualisieren von \"{0}\".",
- "vpnCertUpdateInProgressTitle": "\"{0}\" wird aktualisiert.",
- "vpnCertUpdateSuccessMessage": "\"{0}\" wurde erfolgreich aktualisiert.",
- "vpnCertUpdateSuccessTitle": "\"{0}\" wurde erfolgreich aktualisiert.",
- "vpnFeatureInfo": "Klicken Sie hier, um weitere Informationen zur VPN-Konnektivität und zum bedingten Zugriff zu erhalten.",
- "vpnFeatureWarning": "Sobald ein VPN-Zertifikat im Portal erstellt wird, wird es von Microsoft Entra ID sofort zum Ausstellen kurzlebiger Zertifikate für den VPN-Client verwendet. Das VPN-Zertifikat muss unbedingt sofort auf dem VPN-Server bereitgestellt werden, um Probleme bei der Validierung von Anmeldeinformationen des VPN-Clients zu vermeiden.",
- "vpnMenuText": "VPN-Konnektivität",
- "vpncertDropdownDefaultOption": "Dauer",
- "vpncertDropdownInfoBalloonContent": "Wählen Sie die Dauer für das zu erstellende Zertifikat aus.",
- "vpncertDropdownLabel": "Dauer auswählen",
- "vpncertDropdownOneyearOption": "1 Jahr",
- "vpncertDropdownThreeyearOption": "3 Jahre",
- "vpncertDropdownTwoyearOption": "2 Jahre",
- "wednesday": "Mittwoch",
- "whatIfCountry": "Land/Region",
- "whatIfCountryInfo": "Das Land/die Region, von dem/der aus der Benutzer sich anmeldet.",
- "whatIfDevicePlatformInfo": "Die Geräteplattform, von der aus der Benutzer sich anmeldet.",
- "whatIfEnterIpAddress": "IP-Adresse eingeben (Beispiel: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "Es wurde eine ungültige IP-Adresse angegeben.",
- "whatIfIpAddress": "IP-Adresse",
- "whatIfIpAddressInfo": "Die IP-Adresse, von der aus der Benutzer sich anmeldet.",
- "whatIfIpCountryInfoBoxText": "Wenn Sie eine IP-Adresse oder ein Land/eine Region verwenden, sind beide Felder erforderlich und müssen ordnungsgemäß zugeordnet werden.",
- "whatIfSelectCountry": "Land/Region auswählen...",
- "whatIfSelectDevicePlatform": "Geräteplattform auswählen...",
- "whatIfSelectPrivateLink": "Private Link auswählen...",
- "whatIfSelectSignInRisk": "Anmelderisiko auswählen...",
- "whatIfSignInRisk": "Anmelderisiko",
- "whatIfSignInRiskInfo": "Die der Anmeldung zugeordnete Risikostufe",
- "whatIfUnknownAreas": "Unbekannte Bereiche",
- "windows365InfoBox": "Die Auswahl von Windows 365 wirkt sich auf Verbindungen mit Cloud-PCs und Azure Virtual Desktop-Sitzungshosts aus. Klicken Sie hier, um weitere Informationen zu erhalten.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Workloadidentitäten (Vorschau)",
- "workloadIdentitiesLicenseText": "Wenn Sie diese Richtlinie bearbeiten möchten, benötigen Sie eine Premium-P1- oder P2-Lizenz für Workloadidentitäten.",
- "workloadIdentity": "Workload-Identität"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Nicht unterstützt.",
- "supportEnding": "Bevorstehendes Ende des Supports",
- "supported": "Unterstützt"
- }
- },
- "SecurityTemplate": {
- "aSR": "Verringerung der Angriffsfläche",
- "accountProtection": "Kontoschutz",
- "allDevices": "Alle Geräte",
- "antivirus": "Antivirus",
- "antivirusReporting": "Antivirus-Berichterstellung (Vorschau)",
- "conditionalAccess": "Bedingter Zugriff",
- "deviceCompliance": "Gerätekompatibilität",
- "diskEncryption": "Datenträgerverschlüsselung",
- "eDR": "Endpunkterkennung und -antwort",
- "ePM": "Verwaltung von Endpunktberechtigungen",
- "firewall": "Firewall",
- "helpSupport": "Hilfe und Support",
- "setup": "Setup",
- "wdapt": "Microsoft Defender für Endpunkt"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Fehler",
- "hardReboot": "Harter Neustart",
- "retry": "Wiederholen",
- "softReboot": "Warmneustart",
- "success": "Erfolgreich"
- },
- "Columns": {
- "codeType": "Codetyp",
- "returnCode": "Rückgabecode"
- },
- "bladeTitle": "Rückgabecodes",
- "gridAriaLabel": "Rückgabecodes",
- "header": "Geben Sie Rückgabecodes an, um das Verhalten nach der Installation festzulegen:",
- "onAddAnnounceMessage": "Der Rückgabecode hat Element {0} von {1} hinzugefügt.",
- "onDeleteSuccess": "Der Rückgabecode {0} wurde erfolgreich gelöscht.",
- "returnCodeAlreadyUsedValidation": "Der Rückgabecode wird bereits verwendet.",
- "returnCodeMustBeIntegerValidation": "Der Rückgabecode muss eine ganze Zahl sein.",
- "returnCodeShouldBeAtLeast": "Der Rückgabecode muss mindestens {0} lauten.",
- "returnCodeShouldBeAtMost": "Der Rückgabecode darf maximal {0} lauten.",
- "selectorLabel": "Rückgabecodes"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabisch",
- "bulgarian": "Bulgarisch",
- "chineseSimplified": "Chinesisch (vereinfacht)",
- "chineseTraditional": "Chinesisch (traditionell)",
- "croatian": "Kroatisch",
- "czech": "Tschechisch",
- "danish": "Dänisch",
- "dutch": "Niederländisch",
- "englishUK": "Englisch (Vereinigtes Königreich)",
- "englishUS": "Englisch (USA)",
- "estonian": "Estnisch",
- "finnish": "Finnisch",
- "frenchCanada": "Französisch (Kanada)",
- "frenchFrance": "Französisch (Frankreich)",
- "german": "Deutsch",
- "greek": "Griechisch",
- "hebrew": "Hebräisch",
- "hungarian": "Ungarisch",
- "italian": "Italienisch",
- "japanese": "Japanisch",
- "korean": "Koreanisch",
- "latvian": "Lettisch",
- "lithuanian": "Litauisch",
- "norwegian": "Norwegisch (Bokmål)",
- "polish": "Polnisch",
- "portugueseBrazil": "Portugiesisch (Brasilien)",
- "portuguesePortugal": "Portugiesisch (Portugal)",
- "romanian": "Rumänisch",
- "russian": "Russisch",
- "serbian": "Serbisch",
- "slovak": "Slowakisch",
- "slovenian": "Slowenisch",
- "spanishMexico": "Spanisch (Mexiko)",
- "spanishSpain": "Spanisch (Spanien)",
- "swedish": "Schwedisch",
- "thai": "Thailand",
- "turkish": "Türkisch",
- "ukrainian": "Ukrainisch"
- },
- "Summary": {
- "placeholder": "Wählen Sie links eine Benachrichtigungsmeldung aus, um eine Vorschau der Inhalte anzuzeigen."
- },
- "companyContact": "Kontaktinformationen anzeigen",
- "companyLogo": "Firmenlogo anzeigen",
- "companyName": "Firmennamen anzeigen",
- "createEditDescription": "Erstellen oder bearbeiten Sie Vorlagen für Benachrichtigungs-E-Mails.",
- "createMessage": "Nachricht erstellen",
- "deviceDetails": "Gerätedetails anzeigen",
- "deviceDetailsInfoBox": "Diese Einstellung ist standardmäßig deaktiviert, da das Abrufen von Gerätedetails zu einer Verzögerung beim Empfang von E-Mail-Benachrichtigungen führen kann.",
- "editImpactInfo": "Die Bearbeitung dieser Vorlage für die Benachrichtigungs-E-Mail wirkt sich auf alle Richtlinien aus, die diese Vorlage verwenden.",
- "editMessage": "Nachricht bearbeiten",
- "email": "E-Mail",
- "emailFooterTitle": "E-Mail-Fußzeile",
- "emailHeaderFooterInfo": "Die Einstellungen für E-Mail-Kopf- und -Fußzeilen für E-Mail-Benachrichtigungen basieren auf Anpassungseinstellungen im Mandantenadministratorknoten im Endpoint Manager.",
- "emailHeaderTitle": "E-Mail-Kopf",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Konfigurieren von Anpassungseinstellungen",
- "formSubTitle": "Benachrichtigungs-E-Mails erstellen oder ändern",
- "headerFooterSettingsTab": "Einstellungen für Kopf- und Fußzeile",
- "imgPreview": "Bildvorschau",
- "infotext": "Wählen Sie eine Benachrichtigungsmeldung aus. Um eine neue Benachrichtigung zu erstellen, wechseln Sie im Abschnitt \"Verwalten\" der Workload \"Gerätekompatibilität festlegen\" zu \"Benachrichtigungen\".",
- "iwLink": "Link zur Unternehmensportalwebsite anzeigen",
- "listEmpty": "Keine Nachrichtenvorlagen vorhanden.",
- "listEmptySelectOnly": "Keine Nachrichtenvorlagen vorhanden. Um eine neue Benachrichtigung zu erstellen, wechseln Sie im Abschnitt \"Verwalten\" der Workload \"Gerätekompatibilität festlegen\" zu \"Benachrichtigungen\".",
- "listSubTitle": "Liste von Vorlagen für Benachrichtigungs-E-Mails",
- "listTitle": "Benachrichtigungsvorlagen",
- "localizedNotificationMessageTemplates": "Vorlagen für lokalisierte Benachrichtigungsmeldungen",
- "messageAssigned": "Diese E-Mail-Vorlage kann nicht gelöscht werden, weil sie zurzeit von mindestens einer Konformitätsrichtlinie verwendet wird.",
- "messageCapitalized": "Benachrichtigungsvorlage",
- "messageLowercase": "Benachrichtigungsvorlage",
- "missingDefaultError": "Standardvorlage auswählen",
- "notificationMessageTemplates": "Benachrichtigungsvorlagen",
- "rowValidationError": "Es ist mindestens eine Nachrichtenvorlage erforderlich.",
- "selectDescription": "Wählen Sie eine Benachrichtigungs-E-Mail aus. Um eine neue Benachrichtigung zu erstellen, besuchen Sie \"Benachrichtigungen\" im Abschnitt \"Verwalten\" der Workload \"Gerätekompatibilität festlegen\".",
- "tenantValueText": "Mandantenwert",
- "testEmailLabel": "Vorschau-E-Mail senden",
- "localeLabel": "Gebietsschema",
- "isDefaultLocale": "Ist Standard"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Wartezeit in Tagen bis zum erzwungenen Neustart"
- },
"Description": {
"label": "Beschreibung"
},
+ "FeatureDeploymentSettings": {
+ "header": "Einstellungen für Featurebereitstellung"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Dieses Feature kann kein Downgrade für ein Gerät durchführen.",
+ "label": "Bereitzustellendes Featureupdate"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Endgültige Gruppenverfügbarkeit"
+ },
+ "GradualRolloutInterval": {
+ "label": "Tage zwischen Gruppen"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Erste Gruppenverfügbarkeit"
+ },
"Name": {
"label": "Name"
},
- "QualityUpdateRelease": {
- "label": "Installation von Qualitätsupdates beschleunigen, wenn die Gerätebetriebssystemversion niedriger ist als:"
- },
- "bladeTitle": "Qualitätsupdates Windows 10 und höher (Vorschau)",
- "loadError": "Fehler beim Laden."
+ "OptionalUpdate": {
+ "label": "Erforderliches oder optionales Update"
+ },
+ "RolloutOptions": {
+ "label": "Rollout-Optionen"
+ },
+ "RolloutSettings": {
+ "header": "Wann möchten Sie das Update in Windows Update verfügbar machen?"
+ },
+ "ScopeSettings": {
+ "header": "Konfigurieren Sie Bereichstags für diese Richtlinie."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "Erstes verfügbares Datum"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Deaktiviert",
+ "enabled": "Aktiviert",
+ "infoBalloonContent": "Steuern, ob das neueste Windows 10 Featureupdate auf Geräten installiert werden soll, die nicht für Windows 11 berechtigt sind",
+ "label": "Wenn ein Gerät nicht für die Ausführung von Windows 11 berechtigt ist, das neueste Windows 10 Featureupdate installieren",
+ "notApplicable": "Nicht zutreffend",
+ "summaryLabel": "Windows 10 auf Geräten installieren, die nicht zur Ausführung von Windows 11 berechtigt sind"
+ },
+ "bladeTitle": "Funktionsupdatebereitstellungen",
+ "deploymentSettingsTitle": "Bereitstellungseinstellungen",
+ "loadError": "Fehler beim Laden.",
+ "windows11EULA": "Durch Auswahl dieses Featureupdates für die Bereitstellung stimmen Sie zu, dass Sie bei Anwendung dieses Betriebssystems auf ein Gerät entweder (1) die entsprechende Windows-Lizenz durch Volumenlizenzierung erworben haben oder (2) dazu autorisiert sind, Ihre Organisation vertraglich zu binden, und in ihrem Namen die hier aufgeführten relevanten Microsoft-Software-Lizenzbedingungen akzeptieren: {0}."
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\" wurde gespeichert.",
+ "newFeatureUpdateDeploymentCreated": "Die neue Featureupdatebereitstellung wurde erstellt."
+ },
"TabName": {
- "qualityUpdateSettings": "Einstellungen"
+ "deploymentSettings": "Bereitstellungseinstellungen",
+ "groupAssignmentSettings": "Zuweisungen",
+ "scopeSettings": "Bereichstags"
},
- "infoBoxText": "Die einzige dedizierte Qualitätsupdatesteuerung, die derzeit außer der vorhandenen Updateringrichtlinie für Windows 10 und höher verfügbar ist, ist die Möglichkeit, Qualitätsupdates für Geräte zu beschleunigen, die hinter eine bestimmte Patchebene fallen. Weitere Steuerelemente werden in Zukunft verfügbar sein.",
- "licenseLearnMoreText": "Erfahren Sie mehr über Voraussetzungen und Richtlinien für Qualitätsupdates.",
- "licenseWarningBoxText": "Zum Erstellen von Richtlinien für Qualitätsupdates ist eine bestimmte Lizenzierung erforderlich.",
- "warningBoxText": "Die Beschleunigung von Softwareupdates kann zwar dazu beitragen, bei Bedarf eine schnellere Konformität zu erzielen, sie hat aber einen größeren Einfluss auf die Produktivität der Endbenutzer. Die Wahrscheinlichkeit, dass ein Neustart während der Geschäftszeiten erfolgt, ist deutlich erhöht."
+ "gradualRolloutLicenseWarning": "Für diese Funktionalität ist eine bestimmte Lizenzierung erforderlich.",
+ "gradualRolloutLicenseWarningEdit": "Diese Funktionalität kann weiterhin verwendet und konfiguriert werden, bis die Richtlinie gespeichert wird, ohne dass diese Funktionalität ausgewählt ist.",
+ "licenseLearnMoreText": "Erfahren Sie mehr über Voraussetzungen und Richtlinien für Featureupdates.",
+ "optionalUpdateWarning": "Optional ist nur für Windows 11-Updates verfügbar",
+ "profileNameWarning": "Der Name darf weniger als 64 Zeichen umfassen.",
+ "specificLicensingRequired": "Einige ausgewählte Funktionen erfordern eine bestimmte Lizenzierung."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64 Bit",
- "thirtyTwoBit": "32 Bit"
- },
- "TACSettings": {
- "edgeSettings": "Edge-Konfigurationseinstellungen",
- "edgeWindowsDataProtectionSettings": "Microsoft Edge-Datenschutzeinstellungen (Windows) – Vorschau",
- "edgeWindowsSettings": "Microsoft Edge-Konfigurationseinstellungen (Windows) – Vorschau",
- "generalAppConfig": "Allgemeine App-Konfiguration",
- "generalSettings": "Allgemeine Konfigurationseinstellungen",
- "outlookSMIMEConfig": "Outlook-S/MIME-Einstellungen",
- "outlookSettings": "Outlook-Konfigurationseinstellungen",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Netzwerkgrenze hinzufügen",
- "addNetworkBoundaryButton": "Netzwerkgrenze hinzufügen...",
- "allowWindowsSearch": "Die Suche nach verschlüsselten Daten und Store-Apps durch Windows Search zulassen",
- "authoritativeIpRanges": "Liste der Unternehmens-IP-Bereiche ist autoritativ (keine automatische Erkennung)",
- "authoritativeProxyServers": "Liste der Unternehmensproxyserver ist autoritativ (keine automatische Erkennung)",
- "boundaryType": "Grenztyp",
- "cloudResources": "Cloudressourcen",
- "corporateIdentity": "Unternehmensidentität",
- "dataRecoveryCert": "Laden Sie ein DRA-Zertifikat hoch, um die Wiederherstellung verschlüsselter Daten zuzulassen.",
- "editNetworkBoundary": "Netzwerkgrenze bearbeiten",
- "enrollmentState": "Registrierungsstatus",
- "iPv4Ranges": "IPv4-Bereiche",
- "iPv6Ranges": "IPv6-Bereiche",
- "internalProxyServers": "Interne Proxyserver",
- "maxInactivityTime": "Die maximal zulässige Zeit (in Minuten) nach dem Wechsel des Gerät in den Leerlauf, bis das Gerät durch die PIN oder ein Kennwort gesperrt wird",
- "maxPasswordAttempts": "Zulässige Anzahl von Authentifizierungsfehlern, bevor das Gerät zurückgesetzt wird",
- "mdmDiscoveryUrl": "URL für MDM-Ermittlung",
- "mdmRequiredSettingsInfo": "Diese Richtlinie gilt nur für die Windows 10 Anniversary-Edition und höher. Diese Richtlinie verwendet Windows Information Protection (WIP) zum Anwenden von Schutz.",
- "minimumPinLength": "Legen Sie die für die PIN erforderliche Mindestanzahl an Zeichen fest.",
- "name": "Name",
- "networkBoundariesGridEmptyText": "Hier werden alle von Ihnen hinzugefügten Netzwerkgrenzen angezeigt.",
- "networkBoundary": "Netzwerkgrenze",
- "networkDomainNames": "Netzwerkdomänen",
- "neutralResources": "Neutrale Ressourcen",
- "passportForWork": "Verwenden Sie Windows Hello for Business als Methode zum Anmelden bei Windows.",
- "pinExpiration": "Geben Sie den Zeitraum (in Tagen) an, für den eine PIN verwendet werden kann, bevor das System den Benutzer zur Änderung auffordert.",
- "pinHistory": "Geben Sie die Anzahl der letzten PINs an, die einem Benutzerkonto zugeordnet und nicht wiederverwendet werden können.",
- "pinLowercaseLetters": "Konfigurieren Sie die Verwendung von Kleinbuchstaben in der Windows Hello for Business-PIN.",
- "pinSpecialCharacters": "Konfigurieren Sie die Verwendung von Sonderzeichen in der Windows Hello for Business-PIN.",
- "pinUppercaseLetters": "Konfigurieren Sie die Verwendung von Großbuchstaben in der Windows Hello for Business-PIN.",
- "protectUnderLock": "App-Zugriff auf Unternehmensdaten verhindern, wenn das Gerät gesperrt ist (gilt nur für Windows 10 Mobile)",
- "protectedDomainNames": "Geschützte Domänen",
- "proxyServers": "Proxyserver",
- "requireAppPin": "App-PIN deaktivieren, wenn Geräte-PIN verwaltet wird",
- "requiredSettings": "Erforderliche Einstellungen",
- "requiredSettingsInfo": "Durch das Ändern des Bereichs oder das Entfernen dieser Richtlinie werden die Unternehmensdaten entschlüsselt.",
- "revokeOnMdmHandoff": "Zugriff auf geschützte Daten widerrufen, wenn das Gerät bei MDM registriert wird",
- "revokeOnUnenroll": "Beim Aufheben der Registrierung Verschlüsselungsschlüssel widerrufen",
- "rmsTemplateForEdp": "Geben Sie die Vorlagen-ID zur Verwendung für Azure RMS an.",
- "showWipIcon": "Zeigen Sie das Datenschutzsymbol des Unternehmens an.",
- "type": "Typ",
- "useRmsForWip": "Verwenden Sie Azure RMS für WIP.",
- "value": "Wert",
- "weRequiredSettingsInfo": "Diese Richtlinie gilt nur für Windows 10 Creators Update und höher. Diese Richtlinie verwendet Windows Information Protection (WIP) und Windows MAM zum Anwenden von Schutz.",
- "wipProtectionMode": "Windows Information Protection-Modus",
- "withEnrollment": "Mit Registrierung",
- "withoutEnrollment": "Ohne Registrierung"
+ "Platform": {
+ "all": "Alle",
+ "android": "Android-Geräteadministrator",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Allgemein",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS und Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Unbekannt",
+ "unsupported": "Nicht unterstützt",
+ "windows": "Windows",
+ "windows10": "Windows 10 und höher",
+ "windows10CM": "Windows 10 und höher (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 und höher",
+ "windows8And10": "Windows 8 und 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 und höher",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 und Windows Server (Configuration Manager)",
+ "windows10andLaterCM": "Windows 10 und höher (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows-PC"
+ },
+ "InstallIntent": {
+ "available": "Für registrierte Geräte verfügbar",
+ "availableWithoutEnrollment": "Verfügbar mit oder ohne Registrierung",
+ "required": "Erforderlich",
+ "uninstall": "Deinstallieren"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filter",
+ "noFilters": "Keine"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Autor",
- "template": "Name der Vorlage"
- },
- "Row": {
- "ariaLabel": "Zeile {0} von{1} Spalte {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Starten Sie ganz neu, und wählen Sie die gewünschten Eigenschaften aus der Bibliothek der verfügbaren Bestandseigenschaften aus."
- },
- "SettingsCatalog": {
- "subtitle": "Starten Sie ganz neu, und wählen Sie die gewünschten Einstellungen aus der Bibliothek der verfügbaren Einstellungen aus.",
- "title": "Einstellungskatalog"
- },
- "Templates": {
- "subtitle": "Vorlagen enthalten Gruppen von Einstellungen, die nach Funktionalität angeordnet sind. Verwenden Sie eine Vorlage, wenn Sie Richtlinien nicht manuell erstellen oder Geräte für den Zugriff auf Unternehmensnetzwerke konfigurieren möchten, z. B. durch das Konfigurieren von WLAN oder VPN.",
- "title": "Vorlagen"
- },
- "noData": "Keine Richtlinienvorlagen gefunden."
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Projekt Online-Desktopclient",
- "visioProRetail": "Visio Online-Plan 2"
- },
- "Countries": {
- "ae": "Vereinigte Arabische Emirate",
- "ag": "Antigua und Barbuda",
- "ai": "Anguilla",
- "al": "Albanien",
- "am": "Armenien",
- "ao": "Angola",
- "ar": "Argentinien",
- "at": "Österreich",
- "au": "Australien",
- "az": "Aserbaidschan",
- "bb": "Barbados",
- "be": "Belgien",
- "bf": "Burkina Faso",
- "bg": "Bulgarien",
- "bh": "Bahrain",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei Darussalam",
- "bo": "Bolivien",
- "br": "Brasilien",
- "bs": "Bahamas",
- "bt": "Bhutan",
- "bw": "Botsuana",
- "by": "Belarus",
- "bz": "Belize",
- "ca": "Kanada",
- "cg": "Republik Kongo",
- "ch": "Schweiz",
- "cl": "Chile",
- "cn": "China",
- "co": "Kolumbien",
- "cr": "Costa Rica",
- "cv": "Cabo Verde",
- "cy": "Zypern",
- "cz": "Tschechische Republik",
- "de": "Deutschland",
- "dk": "Dänemark",
- "dm": "Dominica",
- "do": "Dominikanische Republik",
- "dz": "Algerien",
- "ec": "Ecuador",
- "ee": "Estland",
- "eg": "Ägypten",
- "es": "Spanien",
- "fi": "Finnland",
- "fj": "Fidschi",
- "fm": "Föderierte Staaten von Mikronesien",
- "fr": "Frankreich",
- "gb": "Vereinigtes Königreich",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Griechenland",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hongkong",
- "hn": "Honduras",
- "hr": "Kroatien",
- "hu": "Ungarn",
- "id": "Indonesien",
- "ie": "Irland",
- "il": "Israel",
- "in": "Indien",
- "is": "Island",
- "it": "Italien",
- "jm": "Jamaika",
- "jo": "Jordanien",
- "jp": "Japan",
- "ke": "Kenia",
- "kg": "Kirgisistan",
- "kh": "Kambodscha",
- "kn": "St. Kitts und Nevis",
- "kr": "Republik Korea",
- "kw": "Kuwait",
- "ky": "Kaimaninseln",
- "kz": "Kasachstan",
- "la": "Demokratische Volksrepublik Laos",
- "lb": "Libanon",
- "lc": "St. Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Litauen",
- "lu": "Luxemburg",
- "lv": "Lettland",
- "md": "Republik Moldau",
- "mg": "Madagaskar",
- "mk": "Nordmazedonien",
- "ml": "Mali",
- "mn": "Mongolei",
- "mo": "Macau",
- "mr": "Mauretanien",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Mexiko",
- "my": "Malaysia",
- "mz": "Mosambik",
- "na": "Namibia",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Niederlande",
- "no": "Norwegen",
- "np": "Nepal",
- "nz": "Neuseeland",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua-Neuguinea",
- "ph": "Philippinen",
- "pk": "Pakistan",
- "pl": "Polen",
- "pt": "Portugal",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Katar",
- "ro": "Rumänien",
- "ru": "Russische Föderation",
- "sa": "Saudi-Arabien",
- "sb": "Salomonen",
- "sc": "Seychellen",
- "se": "Schweden",
- "sg": "Singapur",
- "si": "Slowenien",
- "sk": "Slowakei",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Suriname",
- "st": "São Tomé und Príncipe",
- "sv": "El Salvador",
- "sz": "Swasiland",
- "tc": "Turks- und Caicosinseln",
- "td": "Tschad",
- "th": "Thailand",
- "tj": "Tadschikistan",
- "tm": "Turkmenistan",
- "tn": "Tunesien",
- "tr": "Türkei",
- "tt": "Trinidad und Tobago",
- "tw": "Taiwan",
- "tz": "Tansania",
- "ua": "Ukraine",
- "ug": "Uganda",
- "us": "Vereinigte Staaten",
- "uy": "Uruguay",
- "uz": "Usbekistan",
- "vc": "St. Vincent und die Grenadinen",
- "ve": "Venezuela",
- "vg": "Britische Jungferninseln",
- "vn": "Vietnam",
- "ye": "Jemen",
- "za": "Südafrika",
- "zw": "Simbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Aktueller Kanal",
- "deferred": "Halbjährlicher Enterprise-Kanal",
- "firstReleaseCurrent": "Aktueller Kanal (Vorschau)",
- "firstReleaseDeferred": "Halbjährlicher Enterprise-Kanal (Vorschau)",
- "monthlyEnterprise": "Monatlicher Enterprise-Kanal",
- "placeHolder": "Eine auswählen"
- },
- "AppProtection": {
- "allAppTypes": "Auf alle App-Typen ausrichten",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Apps in Android for Work-Profil",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps auf dedizierten Android Enterprise-Geräten mit Microsoft Entra-Modus zur gemeinsamen Nutzung",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Projektbenutzer zugeordnete Apps unter Android Open Source",
- "appsOnAndroidOpenSourceProjectUserless": "Projektbenutzerlose Apps unter Android Open Source",
- "appsOnIntuneManagedDevices": "Apps auf durch Intune verwalteten Geräten",
- "appsOnUnmanagedDevices": "Apps auf nicht verwalteten Geräten",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Nicht verfügbar",
- "windows10PlatformLabel": "Windows 10 und höher",
- "withEnrollment": "Mit Registrierung",
- "withoutEnrollment": "Ohne Registrierung"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Integrierte Rolle",
- "customCloudPCRole": "Benutzerdefinierte Windows 365-Rolle",
- "customIntuneRole": "Benutzerdefinierte Intune-Rolle",
- "customRole": "Benutzerdefinierte Rolle"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "\"{0}\" ist in mindestens einem Richtliniensatz enthalten. Wenn Sie \"{0}\" löschen, können Sie das Profil nicht mehr über diese Richtliniensätze zuweisen. Dennoch löschen?",
- "contentWithError": "\"{0}\" ist möglicherweise in mindestens einem Richtliniensatz enthalten. Wenn Sie \"{0}\" löschen, können Sie sie nicht mehr über diese Richtliniensätze zuweisen. Dennoch löschen?",
- "header": "Möchten Sie diese Einschränkung löschen?"
- },
- "DeviceLimit": {
- "description": "Legt die maximale Anzahl von Geräten fest, die ein Benutzer registrieren kann.",
- "header": "Einschränkungen zum Gerätelimit",
- "info": "Definieren Sie, wie viele Geräte jeder Benutzer registrieren darf."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "1.0 oder höher erforderlich.",
- "android": "Geben Sie eine gültige Versionsnummer ein. Beispiele: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Geben Sie eine gültige Versionsnummer ein. Beispiele: 5.0, 5.1.1",
- "iOS": "Geben Sie eine gültige Versionsnummer ein. Beispiele: 9.0, 10.0, 9.0.2",
- "mac": "Geben Sie eine gültige Versionsnummer ein. Beispiele: 10, 10.10, 10.10.1",
- "min": "Der Mindestwert darf nicht unter {0} liegen.",
- "minMax": "Die Mindestversion darf nicht höher als die maximale Version sein.",
- "windows": "Version 10.0 oder höher erforderlich. Lassen Sie die Einstellung leer, um 8.1-Geräte zuzulassen.",
- "windowsMobile": "Version 10.0 oder höher erforderlich. Lassen Sie die Einstellung leer, um 8.1-Geräte zuzulassen."
- },
- "allPlatformsBlocked": "Alle Geräteplattformen sind blockiert. Lassen Sie die Plattformregistrierung zu, um die Plattformkonfiguration zu aktivieren.",
- "blockManufacturerPlaceHolder": "Herstellername",
- "blockManufacturersHeader": "Blockierte Hersteller",
- "cannotRestrict": "Einschränkung nicht unterstützt",
- "configurationDescription": "Legt die Einschränkungen in Bezug auf Plattformkonfigurationen fest, die für ein Gerät erfüllt werden müssen, damit das Gerät registriert werden kann. Verwenden Sie Konformitätsrichtlinien, um Geräte nach der Registrierung einzuschränken. Definieren Sie Versionen als \"Hauptversion.Nebenversion.Build\". Versionseinschränkungen gelten nur für Geräte, die beim Unternehmensportal registriert sind. Intune stuft Geräte standardmäßig als privat ein. Um Geräte als unternehmenseigen zu klassifizieren, sind zusätzliche Aktionen erforderlich.",
- "configurationDescriptionLabel": "Weitere Informationen zum Festlegen von Registrierungseinschränkungen",
- "configurations": "Plattformen konfigurieren",
- "deviceManufacturer": "Gerätehersteller",
- "header": "Einschränkungen zum Gerätetyp",
- "info": "Definieren Sie, welche Plattformen, Versionen und Verwaltungstypen eine Registrierung durchführen können.",
- "manufacturer": "Hersteller",
- "max": "Max.",
- "maxVersion": "Höchste zulässige Version",
- "min": "Min",
- "minVersion": "Mindestversion",
- "newPlatforms": "Es sind neue zugelassene Plattformen verfügbar. Erwägen Sie eine Aktualisierung der Plattformkonfigurationen.",
- "personal": "Persönliches Eigentum",
- "platform": "Plattform",
- "platformDescription": "Sie können die Registrierung der folgenden Plattformen zulassen. Nur blockierte Plattformen werden nicht unterstützt. Zugelassen Plattformen können mit zusätzlichen Registrierungsbeschränkungen konfiguriert werden.",
- "platformSettings": "Plattformeinstellungen",
- "platforms": "Plattformen auswählen",
- "platformsSelected": "{0} Plattformen ausgewählt",
- "type": "Typ",
- "versions": "Versionen",
- "versionsRange": "Zulässiger Bereich für Mindestversion/maximale Version:",
- "windowsTooltip": "Schränkt die Registrierung über mobile Geräteverwaltung ein. Schränkt die Installation des PC-Agents nicht ein. Nur Windows 10- und Windows 11-Versionen werden unterstützt. Lassen Sie die Versionen leer, um Windows 8.1 zuzulassen."
- },
- "Priority": {
- "saved": "Die Einschränkungsprioritäten wurden erfolgreich gespeichert."
- },
- "Row": {
- "announce": "Priorität: {0}, Name: {1}, zugewiesen: {2}"
- },
- "Table": {
- "deployed": "Bereitgestellt",
- "name": "Name",
- "priority": "Priorität"
- },
- "Type": {
- "limit": "Gerätelimiteinschränkung",
- "type": "Gerätetypeinschränkung"
- },
- "allUsers": "Alle Benutzer",
- "androidRestrictions": "Android-Einschränkungen",
- "create": "Einschränkung erstellen",
- "defaultLimitDescription": "Dies ist die Standardeinschränkung des Gerätelimits, die mit der niedrigsten Priorität unabhängig von der Gruppenmitgliedschaft auf alle Benutzer angewendet wird.",
- "defaultTypeDescription": "Dies ist die Standardeinschränkung des Gerätetyps, die mit der niedrigsten Priorität unabhängig von der Gruppenmitgliedschaft auf alle Benutzer angewendet wird.",
- "defaultWhfbDescription": "Dies ist die Windows Hello for Business-Standardkonfiguration, die mit der niedrigsten Priorität unabhängig von der Gruppenmitgliedschaft auf alle Benutzer angewendet wird.",
- "deleteMessage": "Für betroffene Benutzer gilt die Einschränkung der nächsthöheren Priorität. Wenn keine weitere Einschränkung zugewiesen ist, wird die Standardeinschränkung angewendet.",
- "deleteTitle": "Möchten Sie die Einschränkung \"{0}\" löschen?",
- "descriptionHint": "Kurzer Absatz zur Beschreibung der Unternehmensnutzung oder der Einschränkungsebene, die durch die Einstellungen der Einschränkung definiert wird.",
- "edit": "Einschränkung bearbeiten",
- "info": "Ein Gerät muss die Registrierungsbeschränkungen mit der höchsten Priorität erfüllen, die dem Benutzer zugeordnet wurden. Sie können eine Gerätebeschränkung ziehen, um ihre Priorität zu ändern. Standardbeschränkungen weisen für alle Benutzer die niedrigste Priorität auf und dienen zur Steuerung benutzerloser Registrierungen. Standardbeschränkungen können bearbeitet, aber nicht gelöscht werden.",
- "iosRestrictions": "iOS-Einschränkungen",
- "mDM": "MDM",
- "macRestrictions": "macOS-Einschränkungen",
- "maxVersion": "Maximalversion",
- "minVersion": "Mindestversion",
- "nameHint": "Dies ist das primäre Attribut, das zur Identifikation des Einschränkungssatzes angezeigt wird.",
- "noAssignmentsStatusBar": "Weisen Sie die Einschränkung mindestens einer Gruppe zu. Klicken Sie auf \"Eigenschaften\".",
- "nonAdminForbiddenCreateError": "Sie müssen Administrator für den Intune-Dienst oder globaler Administrator sein, um Einschränkungen zu erstellen, zu bearbeiten oder zu löschen.",
- "nonAdminForbiddenEdit": "Sie müssen Administrator*in sein, um Einschränkungen zu bearbeiten.",
- "notFound": "Die Einschränkung wurde nicht gefunden. Möglicherweise wurde es bereits gelöscht.",
- "personallyOwned": "Geräte im Privatbesitz",
- "restriction": "Einschränkung",
- "restrictionLowerCase": "Einschränkung",
- "restrictionType": "Restriction Type",
- "selectType": "Einschränkungstyp auswählen",
- "selectValidation": "Wählen Sie eine Plattform aus.",
- "typeHint": "Wählen Sie \"Gerätetypeinschränkung\" aus, um Geräteeigenschaften einzuschränken. Wählen Sie \"Gerätelimiteinschränkung\" aus, um die Anzahl von Geräten pro Benutzer einzuschränken.",
- "typeRequired": "Der Einschränkungstyp ist erforderlich.",
- "winPhoneRestrictions": "Windows Phone-Einschränkungen",
- "windowsECv1Info": "Ältere Registrierungseinschränkungen können nicht bearbeitet oder neu priorisiert werden. Sie können nur gelöscht werden.",
- "windowsECv2Info": "Sie können Registrierungseinschränkungen priorisieren, indem Sie sie ziehen und ablegen. Zeigen Sie die Standard- und vorkonfigurierten Einschränkungen unten an. Alle neuen Registrierungseinschränkungen haben eine höhere Priorität als Standard- und vorkonfigurierte Einschränkungen.",
- "windowsRestrictions": "Windows-Einschränkungen",
- "windowsRestrictionsPreview": "Filterbasierte Windows-Einschränkungen (Vorschau)"
- },
- "InstallContextType": {
- "device": "Gerät",
- "deviceContext": "Gerätekontext",
- "user": "Benutzer",
- "userContext": "Benutzerkontext"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Beschreibung",
- "placeholder": "Beschreibung eingeben"
- },
- "NameTextBox": {
- "label": "Name",
- "placeholder": "Namen eingeben"
- },
- "PublisherTextBox": {
- "label": "Herausgeber",
- "placeholder": "Geben Sie einen Herausgeber ein."
- },
- "VersionTextBox": {
- "label": "Version"
- },
- "headerDescription": "Erstellen Sie ein neues benutzerdefiniertes Skriptpaket aus von Ihnen geschriebenen Skripts für Erkennung und Wartung."
- },
- "ScopeTags": {
- "headerDescription": "Wählen Sie mindestens eine Gruppe aus, um das Skriptpaket zuzuweisen."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Erkennungsskript",
- "placeholder": "Text für Eingabeskript",
- "requiredValidationMessage": "Geben Sie das Erkennungsskript ein."
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Skriptsignaturprüfung erzwingen"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Dieses Skript mit den Anmeldeinformationen des angemeldeten Benutzers ausführen"
- },
- "RemediationScript": {
- "infoBox": "Dieses Skript wird im reinen Erkennungsmodus ausgeführt, weil kein Wartungsskript vorhanden ist."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Wiederherstellungsskript",
- "placeholder": "Text für Eingabeskript"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Skript in 64-Bit-PowerShell ausführen"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Ungültiges Skript. Mindestens ein im Skript verwendetes Zeichen ist ungültig."
- },
- "headerDescription": "Erstellen Sie ein benutzerdefiniertes Skriptpaket aus Skripts, die Sie geschrieben haben. Standardmäßig werden Skripts täglich auf zugewiesenen Geräten ausgeführt.",
- "infoBox": "Dieses Skript ist schreibgeschützt. Einige der Einstellungen für dieses Skript sind möglicherweise deaktiviert."
- },
- "title": "Benutzerdefiniertes Skript erstellen",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Intervall",
- "time": "Datum und Uhrzeit"
- },
- "Interval": {
- "day": "Wird jeden Tag wiederholt",
- "days": "Wird alle {0} Tage wiederholt",
- "hour": "Wird jede Stunde wiederholt",
- "hours": "Wird alle {0} Stunden wiederholt",
- "month": "Wird jeden Monat wiederholt",
- "months": "Wird alle {0} Monate wiederholt",
- "week": "Wird jede Woche wiederholt",
- "weeks": "Wird alle {0} Wochen wiederholt"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) am {1}",
- "withDate": "{0} am {1}"
- }
- }
- },
- "Edit": {
- "title": "Bearbeiten: {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Zulässige URLs",
- "tooltip": "Geben Sie die Websites an, auf die Ihre Benutzer im Arbeitskontext zugreifen dürfen. Andere Websites sind nicht zulässig. Sie können entweder eine Liste der zulässigen oder der blockierten Websites konfigurieren, aber nicht beides."
- },
- "ApplicationProxyRedirection": {
- "header": "Anwendungsproxy",
- "title": "Anwendungsproxyumleitung",
- "tooltip": "Hiermit aktivieren Sie die App-Proxyumleitung, um Benutzern den Zugriff auf Unternehmenslinks und lokale Web-Apps zu erteilen."
- },
- "BlockedURLs": {
- "title": "Blockierte URLs",
- "tooltip": "Geben Sie die Websites an, die für Ihre Benutzer im Arbeitskontext blockiert sind. Alle anderen Websites sind zulässig. Sie können entweder eine Liste der zulässigen oder der blockierten Websites konfigurieren, aber nicht beides."
- },
- "Bookmarks": {
- "header": "Verwaltete Lesezeichen",
- "tooltip": "Geben Sie eine Liste der mit Lesezeichen versehenen URLs ein, die Ihren Benutzern bei der Verwendung von Microsoft Edge in ihrem Arbeitskontext zur Verfügung stehen.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Verwaltete Homepage",
- "title": "URL-Verknüpfung zur Startseite",
- "tooltip": "Konfigurieren Sie eine URL-Verknüpfung zur Startseite, die Benutzern als erstes Symbol unterhalb der Suchleiste angezeigt wird, wenn sie in Microsoft Edge eine neue Registerkarte öffnen."
- },
- "PersonalContext": {
- "label": "Eingeschränkte Sites an persönlichen Kontext umleiten",
- "tooltip": "Konfigurieren Sie, ob Benutzer zu ihrem persönlichen Kontext wechseln dürfen, um eingeschränkte Websites zu öffnen."
- }
- },
- "BooleanActions": {
- "allow": "Erteilen Sie",
- "block": "Blockieren",
- "configured": "Konfiguriert",
- "disable": "Deaktivieren",
- "dontRequire": "Nicht anfordern",
- "enable": "Aktivieren",
- "hide": "Ausblenden",
- "limit": "Limit",
- "notConfigured": "Nicht konfiguriert",
- "require": "Anfordern",
- "show": "Anzeigen",
- "yes": "Ja"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Benutzern als optionales Update zur Verfügung stellen",
- "optionalValue": "Optional",
- "required": "Benutzern als erforderliches Update zur Verfügung stellen",
- "requiredValue": "Erforderlich"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 Tag",
- "twoDays": "2 Tage",
- "zeroDays": "0 Tage"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Übersicht"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Suchen Sie nach Gerät, Benutzer oder Qualitätsupdateversion."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Fehler beim Laden von iOS-Softwareupdateprofilen"
- }
- },
- "SummaryBlade": {
- "subtitle": "Profil für iOS-Updates",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "Profil"
- },
- "listLoadError": "iOS-Softwareupdateprofile können nicht geladen werden, versuchen Sie es später noch mal.",
- "lowercase": "Richtlinie für iOS-Updates",
- "uppercase": "Richtlinie für iOS-Updates"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Leider können wir keine Verbindung mit Apple herstellen, um die Liste verfügbarer Versionen abzurufen. Versuchen Sie es später noch mal, oder fahren Sie mit der aktuellen Version fort.",
- "latestUpdate": "Aktuelles Update",
- "noLongerSupported": "Die ausgewählte Version wird nicht mehr unterstützt.",
- "olderVersionSelected": "Da Sie eine frühere Version ausgewählt haben, müssen Sie sicherstellen, dass eine Richtlinie für Geräteeinschränkungen angewendet wird, welche die Sichtbarkeit von Softwareupdates verzögert, sodass Geräte nicht auf die neueste Version aktualisiert werden können.",
- "prefix": "iOS/iPadOS installieren",
- "selectSupported": "Von Apple unterstützte Updateversion auswählen",
- "updateToInstall": "Update für Installation"
- },
- "Schedule": {
- "always": "Beim nächsten Einchecken aktualisieren",
- "duringTimeWindows": "Update innerhalb des geplanten Zeitraums",
- "header": "Wenn einem Gerät eine Updaterichtlinie zugewiesen wird, werden die neuesten Updates von Intune standardmäßig beim Einchecken des Geräts bereitgestellt. Sie können stattdessen auch einen wöchentlichen Zeitplan mit benutzerdefinierten Start- und Endzeiten erstellen. Wenn Sie eine Aktualisierung außerhalb des geplanten Zeitraums durchführen möchten, stellt Intune bis zum Ende des geplanten Zeitraums keine Updates bereit.",
- "infoBalloon": "Zeitpunkt der Durchführung von Updates. Zum Planen von Updates während oder außerhalb der geplanten Zeiten ist eine zusätzliche Eingabe erforderlich.",
- "label": "Zeitplantyp",
- "outsideActiveHours": "Außerhalb der aktiven Stunden aktualisieren (Legacy)",
- "outsideTimeWindows": "Update außerhalb des geplanten Zeitraums",
- "timeWindow": "Zeitfenster",
- "timeZone": "Zeitzone",
- "title": "Einstellungen für Updaterichtlinienzeitplan:",
- "weekly": "Wöchentlicher Zeitplan",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "Die Version von iOS/iPadOS, die zum Zeitpunkt des Updates auf Geräten installiert werden soll.",
- "label": "Zu installierende Version auswählen"
- },
- "header": "Erstellen Sie ein Profil, um für die zugewiesenen Geräte eine automatische Installation der neuesten iOS-/iPadOS-Updates zu erzwingen. Diese Einstellungen bestimmen, wie und wann Softwareupdates bereitgestellt werden. Dieses Profil verhindert nicht, dass Benutzer das Betriebssystem manuell aktualisieren. Dies kann für bis zu 90 Tage mithilfe einer Einschränkungsrichtlinie für die Gerätekonfiguration verhindert werden. Updates werden nur auf überwachte Geräte angewendet.",
- "notAvailable": "–"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Es sind keine iOS-Updaterichtlinien zur Anzeige vorhanden.",
- "macOsUpdates": "Es sind keine Richtlinien für macOS-Softwareupdates zur Anzeige vorhanden.",
- "windowsUpdates": "Es sind keine Updateringe für Windows 10 und höher vorhanden, die angezeigt werden sollen."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Gerätename",
- "deviceUpdateStatus": "Status der Geräteupdates",
- "lastUpdated": "Letzte Aktualisierung",
- "osVersion": "Betriebssystemversion",
- "userPrincipalName": "Benutzername"
- },
- "maximumOSVersionFilter": "Maximale Version des Betriebssystems",
- "minimumOSVersionFilter": "Mindestversion des Betriebssystems",
- "noData": "Keine anzuzeigenden Daten.",
- "searchBoxPlaceholder": "Nach Gerätename, Benutzername oder Betriebssystemversion suchen",
- "title": "Kontozusammenfassung für macOS-Geräte"
- },
- "Category": {
- "configurationDataFile": "Konfigurationsdatendatei",
- "critical": "Kritisch",
- "firmware": "Firmware",
- "other": "Andere"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Letzte Aktualisierung",
- "successfulUpdateCount": "Erfolgreich bereitgestellte Updates",
- "totalUpdateCount": "Gesamtanzahl bereitgestellter Updates",
- "updateCategory": "Updatekategorie",
- "updateCategoryStatus": "Status der Updatekategorie"
- },
- "noData": "Keine anzuzeigenden Daten."
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Fehler beim Laden von macOS-Softwareupdateprofilen"
- }
- },
- "State": {
- "available": "Verfügbar",
- "commandFailed": "Fehler bei Befehl.",
- "downloadFailed": "Fehler beim Herunterladen",
- "downloadInsufficientNetwork": "Download: unzureichende Netzwerkressourcen",
- "downloadInsufficientPower": "Download: unzureichende Akkukapazität",
- "downloadInsufficientSpace": "Download: unzureichender Speicherplatz",
- "downloaded": "Heruntergeladen",
- "downloading": "Wird heruntergeladen",
- "idle": "Im Leerlauf",
- "installFailed": "Installationsfehler",
- "installInsufficientPower": "Installation: unzureichende Akkukapazität",
- "installInsufficientSpace": "Installation: unzureichender Speicherplatz",
- "installing": "Wird installiert.",
- "scheduled": "Geplant",
- "success": "Erfolgreich",
- "unknown": "Unbekannt"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Letzte Aktualisierung",
- "updateName": "Updatename",
- "updateStatus": "Updatestatus",
- "version": "Version"
- },
- "noData": "Keine anzuzeigenden Daten.",
- "searchBoxPlaceholder": "Nach Updatename oder -version suchen"
- },
- "SummaryBlade": {
- "subtitle": "macOS-Updateprofil",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profil"
- },
- "error": "Fehler",
- "errorOrErrors": "Fehler",
- "errors": "Fehler",
- "listLoadError": "Die macOS-Softwareupdateprofile können nicht geladen werden, versuchen Sie es später noch mal.",
- "lowercase": "macOS-Updaterichtlinie",
- "other": "Andere",
- "subtitle": "macOS-Softwareupdate",
- "upToDate": "Aktuell",
- "uppercase": "macOS-Updaterichtlinie"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Versuchen Sie es später noch mal.",
- "title": "Fehler beim Löschen von {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Versuchen Sie es später noch mal."
- },
- "LoadConfigurationFailed": {
- "description": "Versuchen Sie es später noch mal.",
- "title": "Fehler beim Laden von {0}."
- },
- "idWrongFormat": "Die angegebene ID für das Profil weist nicht das erwartete Format auf."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "Es muss mindestens ein Zeitfenster ausgewählt werden.",
- "tooMany": "Es können maximal 20 Zeitfenster konfiguriert werden."
- }
- },
- "endDay": "Endtag",
- "endTime": "Beendigungszeit",
- "startDay": "Starttag",
- "startTime": "Startzeit",
- "timeWindowError": "Wählen Sie ein Zeitfenster von mindestens einer Stunde aus."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Fehler beim Laden der Updateringprofile für Windows 10 und höher."
- }
- },
- "SummaryBlade": {
- "subtitle": "Updatering für Windows 10 und höher",
- "title": "Windows Update for Business"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 und höher",
- "title": "Updatering für Windows 10 und höher"
- },
- "listLoadError": "Updateringprofile für Windows 10 und höher können nicht geladen werden. Versuchen Sie es später noch mal.",
- "lowercase": "Updatering",
- "uppercase": "Updatering"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Richtlinieneinstellungen aktualisieren",
- "updateRingSettings": "Einstellungen für Updatering"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "{0} erstellen",
- "edit": "{0} bearbeiten"
- }
- },
- "notScannedYet": "Noch nicht überprüft",
- "outOfDateIosDevices": "Veraltete iOS-Geräte"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Geräteeinschränkungen (Gerätebesitzer)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "Richtlinie für iOS-Updates"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Ist gleich",
+ "greaterThan": "Größer als",
+ "greaterThanOrEqualTo": "Größer oder gleich",
+ "lessThan": "Kleiner als",
+ "lessThanOrEqualTo": "Kleiner oder gleich",
+ "notEqualTo": "Ungleich"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Überprüfung der Skriptsignatur erzwingen und Skript unbeaufsichtigt ausführen",
+ "enforceSignatureCheckTooltip": "Wählen Sie \"Ja\", um sicherzustellen, dass das Skript von einem vertrauenswürdigen Herausgeber signiert ist, damit das Skript ohne Warnungen oder Anzeige von Benutzeraufforderungen ausgeführt werden kann. Das Skript wird ohne Blockierung ausgeführt. Wählen Sie \"Nein\" (Standardeinstellung) aus, um das Skript mit Benutzerbestätigung ohne Signaturüberprüfung auszuführen.",
+ "header": "Benutzerdefiniertes Skript für die Erkennung verwenden",
+ "runAs32Bit": "Skript auf 64-Bit-Clients als 32-Bit-Prozess ausführen",
+ "runAs32BitTooltip": "Wählen Sie \"Ja\", um das Skript auf 64-Bit-Clients in einem 32-Bit-Prozess auszuführen. Wählen Sie \"Nein\" (Standardeinstellung) aus, um das Skript auf 64-Bit-Clients in einem 64-Bit-Prozess auszuführen. 32-Bit-Clients führen das Skript in einem 32-Bit-Prozess aus.",
+ "scriptContent": "Skriptinhalt",
+ "scriptFile": "Skriptdatei",
+ "scriptFileNotSelectedValidation": "Keine Skriptdatei ausgewählt.",
+ "scriptFileTooltip": "Wählen Sie ein PowerShell-Skript aus, mit dem das Vorhandensein der App auf dem Client erkannt wird. Die App wird erkannt, wenn das Skript den Wert 0 als Exitcode zurückgibt und einen Zeichenfolgenwert in STDOUT schreibt.",
+ "scriptSizeLimitValidation": "Ihr Erkennungsskript überschreitet die maximal zulässige Größe. Beheben Sie dies, indem Sie die Größe Ihres Erkennungsskripts verringern."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Erstellungsdatum",
+ "dateModified": "Änderungsdatum",
+ "doesNotExist": "Datei oder Ordner nicht vorhanden.",
+ "fileOrFolderExists": "Datei oder Ordner ist vorhanden",
+ "sizeInMB": "Größe in MB",
+ "version": "Zeichenfolge (Version)"
+ },
+ "associatedWith32Bit": "Auf 64-Bit-Clients einer 32-Bit-App zugeordnet",
+ "associatedWith32BitTooltip": "Wählen Sie \"Ja\", um Pfadumgebungsvariablen auf 64-Bit-Clients im 32-Bit-Kontext zu erweitern. Wählen Sie \"Nein\" (Standardeinstellung) aus, um Pfadvariablen auf 64-Bit-Clients im 64-Bit-Kontext zu erweitern. 32-Bit-Clients verwenden immer den 32-Bit-Kontext.",
+ "detectionMethod": "Erkennungsmethode",
+ "detectionMethodTooltip": "Wählen Sie den Typ der Erkennungsmethode aus, um das Vorhandensein der App zu überprüfen.",
+ "fileOrFolder": "Datei oder Ordner",
+ "fileOrFolderToolTip": "Die Datei oder der Ordner für die Erkennung.",
+ "operator": "Operator",
+ "operatorTooltip": "Wählen Sie den Operator für die Erkennungsmethode zum Überprüfen des Vergleichs aus.",
+ "path": "Pfad",
+ "pathTooltip": "Der vollständige Pfad des Ordners, der die Datei oder den Order für die Ermittlung enthält.",
+ "value": "Wert",
+ "valueTooltip": "Wählen Sie einen Wert aus, der der ausgewählten Erkennungsmethode entspricht. Datumserkennungsmethoden müssen in lokaler Zeit eingegeben werden."
+ },
+ "GridColumns": {
+ "pathOrCode": "Pfad/Code",
+ "type": "Typ"
+ },
+ "MsiRule": {
+ "operator": "Operator",
+ "operatorTooltip": "Wählen Sie den Operator für den Vergleich zur MSI-Produktversionsüberprüfung aus.",
+ "productCode": "MSI-Produktcode",
+ "productCodeTooltip": "Ein gültiger MSI-Produktcode für die App.",
+ "productVersion": "Wert",
+ "productVersionCheck": "Überprüfung der MSI-Produktversion",
+ "productVersionCheckTooltip": "Wählen Sie \"Ja\", um zusätzlich zum MSI-Produktcode die MSI-Produktversion zu überprüfen.",
+ "productVersionTooltip": "Geben Sie die MSI-Produktversion für die App ein."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Ganzzahlenvergleich",
+ "keyDoesNotExist": "Schlüssel nicht vorhanden",
+ "keyExists": "Schlüssel vorhanden",
+ "stringComparison": "Zeichenfolgenvergleich",
+ "valueDoesNotExist": "Wert nicht vorhanden",
+ "valueExists": "Wert vorhanden",
+ "versionComparison": "Versionsvergleich"
+ },
+ "associatedWith32Bit": "Auf 64-Bit-Clients einer 32-Bit-App zugeordnet",
+ "associatedWith32BitTooltip": "Wählen Sie \"Ja\", um auf 64-Bit-Clients die 32-Bit-Registrierung zu durchsuchen. Wählen Sie \"Nein\" (Standardeinstellung) aus, um auf 64-Bit-Clients die 64-Bit-Registrierung zu durchsuchen. 32-Bit-Clients durchsuchen immer die 32-Bit-Registrierung.",
+ "detectionMethod": "Erkennungsmethode",
+ "detectionMethodTooltip": "Wählen Sie den Typ der Erkennungsmethode aus, um das Vorhandensein der App zu überprüfen.",
+ "keyPath": "Schlüsselpfad",
+ "keyPathTooltip": "Der vollständige Pfad des Registrierungseintrags mit dem Wert, der erkannt werden soll.",
+ "operator": "Operator",
+ "operatorTooltip": "Wählen Sie den Operator für die Erkennungsmethode zum Überprüfen des Vergleichs aus.",
+ "value": "Wert",
+ "valueName": "Wertname",
+ "valueNameTooltip": "Der Name des Registrierungswerts, der erkannt werden soll.",
+ "valueTooltip": "Wählen Sie einen Wert aus, der mit der ausgewählten Erkennungsmethode übereinstimmt."
+ },
+ "RuleTypeOptions": {
+ "file": "Datei",
+ "mSI": "MSI",
+ "registry": "Registrierung"
+ },
+ "gridAriaLabel": "Erkennungsregeln",
+ "header": "Erstellen Sie eine Regel, die das Vorhandensein dieser App anzeigt.",
+ "noRulesSelectedPlaceholder": "Keine Regeln angegeben.",
+ "ruleTableLimit": "Sie können bis zu 25 Erkennungsregeln hinzufügen.",
+ "ruleType": "Regeltyp",
+ "ruleTypeTooltip": "Wählen Sie den Typ der hinzuzufügenden Erkennungsregel aus."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Benutzerdefiniertes Skript für die Erkennung verwenden",
+ "manual": "Erkennungsregeln manuell konfigurieren"
+ },
+ "bladeTitle": "Erkennungsregeln",
+ "header": "Konfigurieren Sie App-spezifische Regeln zum Erkennen des Vorhandenseins der App.",
+ "rulesFormat": "Regelformat",
+ "rulesFormatTooltip": "Konfigurieren Sie die Erkennungsregeln entweder manuell, oder verwenden Sie ein benutzerdefiniertes Skript, um das Vorhandensein der App zu erkennen.",
+ "selectorLabel": "Erkennungsregeln"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Microsoft-Softwarelizenzbedingungen im Auftrag von Benutzern akzeptieren",
"appSuiteConfigurationLabel": "App-Suite-Konfiguration",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} Sprache(n) ausgewählt",
"xmlConfigurationLabel": "XML-Konfiguration"
},
- "Filters": {
- "ruleSyntax": "Regelsyntax",
- "filters": "Filter"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Benutzer das Ändern der Einstellung erlauben",
- "tooltip": "Geben Sie an, ob der Benutzer die Einstellung ändern darf."
- },
- "AllowWorkAccounts": {
- "title": "Nur Geschäfts-, Schul- oder Unikonten zulassen",
- "tooltip": " Wenn diese Einstellung aktiviert ist, können Benutzer keine persönlichen E-Mail- und Speicherkonten in Outlook hinzufügen. Wenn der Benutzer ein persönliches Konto zu Outlook hinzugefügt hat, wird er aufgefordert, das persönliche Konto zu entfernen. Wird das persönliche Konto nicht entfernt, kann das Geschäfts, Schul- oder Unikonto nicht hinzugefügt werden."
- },
- "BlockExternalImages": {
- "title": "Externe Bilder blockieren",
- "tooltip": "Wenn die Option \"Externe Bilder blockieren\" aktiviert ist, verhindert die App das Herunterladen von im Internet gehosteten Bildern, die in den Nachrichtentext eingebettet sind. Wird diese Einstellung als nicht konfiguriert festgelegt, lautet die Standardeinstellung für die App \"Aus\"."
- },
- "ConfigureEmail": {
- "title": "E-Mail-Kontoeinstellungen konfigurieren"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Die Standard-App-Signatur gibt an, ob die App \"Outlook für Android herunterladen\" als standardmäßige Signatur beim Verfassen von Nachrichten verwendet wird. Wenn die Einstellung als deaktiviert konfiguriert ist, wird die standardmäßige Signatur nicht verwendet. Benutzer können jedoch ihre eigene Signatur hinzufügen.\r\n\r\nWenn sie als nicht konfiguriert festgelegt wird, ist die Standard-App-Einstellung aktiviert.",
- "iOS": "Die Standard-App-Signatur gibt an, ob die App \"Outlook für iOS herunterladen\" als standardmäßige Signatur beim Verfassen von Nachrichten verwendet wird. Wenn die Einstellung als deaktiviert konfiguriert ist, wird die standardmäßige Signatur nicht verwendet. Benutzer können jedoch ihre eigene Signatur hinzufügen.\r\n\r\nWenn sie als nicht konfiguriert festgelegt wird, ist die Standard-App-Einstellung aktiviert."
- },
- "title": "Standard-App-Signatur"
- },
- "OfficeFeedReplies": {
- "title": "Ermittlungsfeed",
- "tooltip": "Im Ermittlungsfeed werden die Office-Dateien angezeigt, auf die am häufigsten zugegriffen wurde. Standardmäßig ist dieser Feed aktiviert, wenn Delve für den Benutzer aktiviert ist. Wurde die App nicht konfiguriert, lautet die Standard-App-Einstellung \"Ein\"."
- },
- "OrganizeMailByThread": {
- "title": "E-Mails nach Thread organisieren",
- "tooltip": "Das Standardverhalten in Outlook besteht darin, E-Mail-Nachrichten zu bündeln und als Unterhaltungsthread anzuzeigen. Wenn diese Einstellung deaktiviert ist, gruppiert Outlook die E-Mails nicht, sondern zeigt jede E-Mail einzeln an."
- },
- "PlayMyEmails": {
- "title": "Meine E-Mails wiedergeben",
- "tooltip": "Das Feature \"Meine E-Mails wiedergeben\" ist in der App standardmäßig nicht aktiviert, wird aber berechtigten Benutzern über ein Banner im Posteingang angepriesen. Wenn diese Option deaktiviert ist, werden berechtigte Benutzer in der App nicht auf dieses Feature aufmerksam gemacht. Benutzer können \"Meine E-Mails wiedergeben\" auch dann manuell über die App aktivieren, wenn dieses Feature deaktiviert ist. Bei der Einstellung \"Nicht konfiguriert\" ist die App-Einstellung standardmäßig aktiviert, und berechtigte Benutzer werden auf das Feature aufmerksam gemacht."
- },
- "SuggestedReplies": {
- "title": "Vorgeschlagene Antworten",
- "tooltip": "Wenn Sie eine Nachricht öffnen, schlägt Outlook unterhalb der Nachricht möglicherweise Antworten vor. Wenn Sie eine vorgeschlagene Antwort auswählen, können Sie diese vor dem Senden bearbeiten."
- },
- "SyncCalendars": {
- "title": "Kalender synchronisieren",
- "tooltip": "Hiermit wird konfiguriert, ob Benutzer ihren Outlook-Kalender mit der nativen Kalender-App und -datenbank synchronisieren können."
- },
- "TextPredictions": {
- "title": "Textvorhersagen",
- "tooltip": "Während Sie Nachrichten verfassen, kann Outlook Wörter und Ausdrücke vorschlagen. Wischen Sie, um einen von Outlook angebotenen Vorschlag zu akzeptieren. Wenn diese Einstellung auf \"Nicht konfiguriert\" festgelegt ist, wird die standardmäßige App-Einstellung auf EIN festgelegt."
- },
- "ThemesEnabled": {
- "title": "Designs aktiviert",
- "tooltip": "Geben Sie an, ob der Benutzer ein benutzerdefiniertes visuelles Design verwenden darf."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS-Geräte"
- },
- "ManagedDesktop": {
- "adminContacts": "Administratorkontakte",
- "appPackaging": "App-Paketierung",
- "autopatchGroups": "Autopatch-Gruppen",
- "devices": "Geräte",
- "featureEnablement": "Feature aktivieren",
- "feedback": "Feedback",
- "gettingStarted": "Erste Schritte",
- "messages": "Meldungen",
- "onlineResources": "Onlineressourcen",
- "policyHealth": "Richtlinienintegrität",
- "policyHealthPreview": "Richtlinienintegrität (Vorschau)",
- "releaseManagement": "Release Management",
- "serviceRequests": "Service Requests",
- "settings": "Einstellungen",
- "supportRequests": "Supportanfragen",
- "tenantEnrollment": "Mandantenregistrierung",
- "tenantManagement": "Mieterverwaltung"
- },
- "actions": "Aktionen bei Inkompatibilität",
- "advancedExchangeSettings": "Exchange Online-Einstellungen",
- "advancedThreatProtection": "Microsoft Defender für Endpunkt",
- "allApps": "Alle Apps",
- "allDevices": "Alle Geräte",
- "androidFotaDeployments": "Android FOTA-Bereitstellungen",
- "appBundles": "App-Bundles",
- "appCategories": "App-Kategorien",
- "appConfigPolicies": "App-Konfigurationsrichtlinien",
- "appConfigurationStatus": "App-Konfigurationsstatus",
- "appInstallStatus": "App-Installationsstatus",
- "appLicences": "App-Lizenzen",
- "appProtectionPolicies": "App-Schutzrichtlinien",
- "appProtectionStatus": "App-Schutzstatus",
- "appSelectiveWipe": "Selektive App-Zurücksetzung",
- "appleVppTokens": "Apple-VPP-Token",
- "apps": "Apps",
- "assign": "Zuweisungen",
- "assignedPermissions": "Zugewiesene Berechtigungen",
- "assignedRoles": "Zugewiesene Rollen",
- "autopilotDeploymentReport": "Autopilot-Bereitstellungen (Vorschau)",
- "autopilotDeploymentReportV2": "Autopilot-Bereitstellungen 2.0 (Vorschau)",
- "brandingAndCustomization": "Anpassung",
- "cartProfiles": "Warenkorbprofile",
- "certificateConnectors": "Zertifikatconnectors",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Geräte mit Cloudanbindung (Vorschau)",
- "cloudPcActions": "Cloud-PC-Aktionen (Vorschau)",
- "cloudPcMaintenanceWindows": "Wartungsfenster für Cloud-PCs (Vorschau)",
- "compliancePolicies": "Konformitätsrichtlinien",
- "complianceScriptManagement": "Skripts",
- "complianceScriptManagementPreview": "Skripts (Vorschau)",
- "complianceSettings": "Einstellungen für Kompatibilitätsrichtlinie",
- "conditionStatements": "Bedingungsaussagen",
- "conditions": "Speicherorte",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Konfigurationsprofile",
- "configurationScripts": "Konfigurationsskripts",
- "connectorsAndTokens": "Connectors und Token",
- "corporateDeviceIdentifiers": "Bezeichner von Unternehmensgeräten",
- "customAttributes": "Benutzerdefinierte Attribute",
- "customNotifications": "Benutzerdefinierte Benachrichtigungen",
- "deploymentSettings": "Bereitstellungseinstellungen",
- "derivedCredentials": "Abgeleitete Anmeldeinformationen",
- "deviceActions": "Geräteaktionen",
- "deviceCategories": "Gerätekategorien",
- "deviceCleanUp": "Regeln für die Gerätebereinigung",
- "deviceEnrollmentManagers": "Geräteregistrierungs-Manager",
- "deviceExecutionStatus": "Gerätestatus",
- "deviceLimitEnrollmentRestrictions": "Registrierungseinschränkungen – Gerätelimit",
- "deviceTypeEnrollmentRestrictions": "Registrierungseinschränkungen – Geräteplattform",
- "devices": "Geräte",
- "discoveredApps": "Ermittelte Apps",
- "edgePolicies": "Richtlinien für Microsoft Edge",
- "embeddedSIM": "eSIM-Mobilfunkprofile (Vorschau)",
- "enrollDevices": "Geräte registrieren",
- "enrollmentFailures": "Registrierungsfehler",
- "enrollmentNotifications": "Registrierungsbenachrichtigungen (Vorschau)",
- "enrollmentRestrictions": "Registrierungsbeschränkungen",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange-Dienstconnectors",
- "failuresForCumulativeQualityUpdates": "Fehler bei kumulativen Windows-Qualitätsupdates",
- "failuresForDriverUpdates": "Windows-Treiberupdatefehler",
- "failuresForFeatureUpdates": "Fehler bei Featureupdate",
- "failuresForQualityUpdates": "Fehler bei beschleunigten Windows-Updates",
- "featureFlighting": "Feature-Flighting",
- "featureUpdateDeployments": "Featureupdates für Windows 10 und höher",
- "flighting": "Test-Flighting",
- "fotaUpdate": "Firmware-Over-the-Air-Update",
- "groupPolicy": "Administrative Vorlagen",
- "groupPolicyAnalytics": "Analyse von Gruppenrichtlinien",
- "helpSupport": "Hilfe und Support",
- "helpSupportReplacement": "Hilfe und Support ({0})",
- "iOSAppProvisioning": "iOS-App-Bereitstellungsprofile",
- "incompleteUserEnrollments": "Unvollständige Benutzerregistrierungen",
- "iosUpdates": "Richtlinien für iOS/iPadOS aktualisieren",
- "legacyPcManagement": "Legacy-PC-Verwaltung",
- "macOSSoftwareUpdate": "Updaterichtlinien für macOS",
- "macOSSoftwareUpdateAccountSummaries": "Installationsstatus für macOS-Geräte",
- "macOSSoftwareUpdateCategorySummaries": "Zusammenfassung der Softwareupdates",
- "macOSSoftwareUpdateStateSummaries": "Updates",
- "managedGooglePlay": "Verwaltetes Google Play",
- "msfb": "Microsoft Store für Unternehmen",
- "myPermissions": "Meine Berechtigungen",
- "notifications": "Benachrichtigungen",
- "officeApps": "Office-Apps",
- "officeProPlusPolicies": "Richtlinien für Office-Apps",
- "onPremise": "Lokal",
- "onPremisesConnector": "Lokaler Connector für Exchange ActiveSync",
- "onPremisesDeviceAccess": "Exchange ActiveSync-Geräte",
- "onPremisesManageAccess": "Zugriff auf Exchange lokal",
- "outOfDateIosDevices": "Installationsfehler für iOS-Geräte",
- "overview": "Übersicht",
- "partnerDeviceManagement": "Partnergeräteverwaltung",
- "perUpdateRingDeploymentState": "Bereitstellungsstatus pro Updatering",
- "permissions": "Berechtigungen",
- "platformApps": "{0} Apps",
- "platformDevices": "{0} Geräte",
- "platformEnrollment": "{0}-Registrierung",
- "policies": "Richtlinien",
- "profiles": "Profile",
- "properties": "Eigenschaften",
- "reports": "Berichte",
- "retireNoncompliantDevices": "Nicht konforme Geräte abkoppeln",
- "retireNoncompliantDevicesPreview": "Nicht konforme Geräte abkoppeln (Vorschau)",
- "role": "Rolle",
- "scriptManagement": "Skripts",
- "securityBaselines": "Sicherheitsbaselines",
- "serviceToServiceConnector": "Exchange Online-Connector",
- "servicenowConnector": "ServiceNow-Connector",
- "shellScripts": "Shellskripts",
- "teamViewerConnector": "TeamViewer-Connector",
- "telecomeExpenseManagement": "Telecom Expense Management",
- "tenantAdmin": "Mandantenadministrator",
- "tenantAdministration": "Mandantenverwaltung",
- "termsAndConditions": "Geschäftsbedingungen",
- "titles": "Titel",
- "troubleshoot": "Problembehandlung",
- "troubleshootSupport": "Problembehandlung + Support",
- "user": "Benutzer",
- "userExecutionStatus": "Benutzerstatus",
- "wdacSupplementalPolicies": "Zusätzliche S Modus-Richtlinien",
- "win32CatalogUpdateApp": "Updates für Unternehmens-App-Verwaltungs-Apps",
- "win32CatalogUpdateAppInPreview": "Updates für Windows-Katalog-Apps (Win32) (Vorschau)",
- "windows10DriverUpdate": "Treiberupdates für Windows 10 und höher",
- "windows10QualityUpdate": "Qualitätsupdates für Windows 10 und höher",
- "windows10UpdateRings": "Updateringe für Windows 10 und höher",
- "windows10XPolicyFailures": "Windows 10X-Richtlinienfehler",
- "windows365PartnerConnector": "Windows 365-Partnerconnectors",
- "windowsDiagnosticData": "Windows-Daten",
- "windowsEnterpriseCertificate": "Windows Enterprise-Zertifikat",
- "windowsManagement": "Skripts",
- "windowsSideLoadingKeys": "Windows-Schlüssel zum Querladen",
- "windowsSymantecCertificate": "Windows-DigiCert-Zertifikat",
- "windowsThreatReport": "Status des Bedrohungs-Agents"
- },
- "ScopeTypes": {
- "allDevices": "Alle Geräte",
- "allUsers": "Alle Benutzer",
- "allUsersAndDevices": "Alle Benutzer und alle Geräte",
- "selectedGroups": "Ausgewählte Gruppen"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search als Standard",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype for Business",
- "oneDrive": "OneDrive-Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone und iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Nicht unterstützt.",
+ "supportEnding": "Bevorstehendes Ende des Supports",
+ "supported": "Unterstützt"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Standard",
- "header": "Updatepriorität",
- "postponed": "Zurückgestellt",
- "priority": "Hohe Priorität"
- },
- "AutoUpdateSupersededApps": {
- "label": "Automatische Aktualisierung",
- "sublabel": "Wenn abgelöste Apps vom Benutzer von Unternehmensportal installiert wurden, muss die abgelöste App installiert werden."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Hintergrund",
- "displayText": "Inhaltsdownload in {0}",
- "foreground": "Vordergrund",
- "header": "Priorität der Bereitstellungsoptimierung"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Dem Benutzer das Aufschieben der Neustartbenachrichtigung gestatten",
- "countdownDialog": "Wählen Sie aus, wann das Dialogfeld \"Minuten bis zum Neustart\" vor der Durchführung des Neustarts angezeigt wird.",
- "durationInMinutes": "Kulanzzeitraum für Geräteneustart (Minuten)",
- "snoozeDurationInMinutes": "Zeitraum bis zur erneuten Erinnerung auswählen (Minuten)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Zeitzone",
- "local": "Geräte-Zeitzone",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Datum und Uhrzeit",
- "deadlineTimeColumnLabel": "Installationsstichtag",
- "deadlineTimeDatePickerErrorMessage": "Das ausgewählte Datum muss nach dem Verfügbarkeitsdatum liegen.",
- "deadlineTimeLabel": "Stichtag für App-Installation",
- "defaultTime": "So bald wie möglich",
- "infoText": "Diese Anwendung ist gleich nach der Bereitstellung verfügbar, wenn Sie unten keine Verfügbarkeitszeit angeben. Wenn es sich um eine erforderliche Anwendung handelt, können Sie den Installationsstichtag angeben.",
- "specificTime": "Bestimmtes Datum und bestimmte Uhrzeit",
- "startTimeColumnLabel": "Verfügbarkeit",
- "startTimeDatePickerErrorMessage": "Das ausgewählte Datum muss vor dem Stichtag liegen.",
- "startTimeLabel": "App-Verfügbarkeit"
- },
- "restartGracePeriodHeader": "Kulanzzeitraum neu starten",
- "restartGracePeriodLabel": "Kulanzzeitraum für Geräteneustart",
- "summaryTitle": "Funktionalität für Endbenutzer"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "Die Datei oder der Ordner als ausgewählte Anforderung.",
- "pathToolTip": "Der vollständige Pfad der Datei oder des Ordners, die bzw. der erkannt werden soll.",
- "property": "Eigenschaft",
- "valueToolTip": "Wählen Sie einen Anforderungswert aus, der der ausgewählten Erkennungsmethode entspricht. Die Datums- und die Zeitanforderung müssen im lokalen Format eingegeben werden."
- },
- "GridColumns": {
- "pathOrScript": "Pfad/Skript",
- "type": "Typ"
- },
- "Registry": {
- "keyPath": "Schlüsselpfad",
- "keyPathTooltip": "Der vollständige Pfad des Registrierungseintrags mit dem Wert als Anforderung.",
- "operator": "Operator",
- "operatorTooltip": "Wählen Sie den Operator für den Vergleich aus.",
- "registryRequirement": "Registrierungsschlüsselanforderung",
- "registryRequirementTooltip": "Wählen Sie den Registrierungsschlüssel-Anforderungsvergleich aus.",
- "valueName": "Wertname",
- "valueNameTooltip": "Der Name des erforderlichen Registrierungswerts."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Alle empfohlenen Treiberupdates automatisch genehmigen",
+ "manual": "Manuelles Genehmigen und Bereitstellen von Treiberupdates"
+ },
+ "BulkActions": {
+ "button": "Massenvorgänge"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Genehmigungsmethode:"
},
- "RequirementTypeOptions": {
- "fileType": "Datei",
- "registry": "Registrierung",
- "script": "Skript"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Boolescher Wert",
- "dateTime": "Datum und Uhrzeit",
- "float": "Gleitkomma",
- "integer": "Ganze Zahl",
- "string": "Zeichenfolge",
- "version": "Version"
- },
- "duplicateName": "Der Skriptname \"{0}\" wird bereits verwendet. Geben Sie einen anderen Namen ein.",
- "enforceSignatureCheck": "Skriptsignaturprüfung erzwingen",
- "enforceSignatureCheckTooltip": "Wählen Sie \"Ja\" aus, um sicherzustellen, dass das Skript von einem vertrauenswürdigen Herausgeber signiert ist, damit das Skript ohne Warnungen oder Eingabeaufforderungen ausgeführt werden kann. Das Skript wird ohne Blockierung ausgeführt. Wählen Sie \"Nein\" (Standardeinstellung) aus, um das Skript mit Benutzerbestätigung, aber ohne Signaturüberprüfung auszuführen.",
- "loggedOnCredentials": "Dieses Skript mit den Anmeldeinformationen des angemeldeten Benutzers ausführen",
- "loggedOnCredentialsTooltip": "Führen Sie das Skript mit den Anmeldeinformationen des angemeldeten Geräts aus.",
- "operatorTooltip": "Wählen Sie den Operator für den Anforderungsvergleich aus.",
- "requirementMethod": "Ausgabedatentyp auswählen",
- "requirementMethodTooltip": "Wählen Sie den Datentyp aus, der beim Ermitteln einer Anforderung zur Erkennungsübereinstimmung verwendet wird.",
- "scriptContent": "Skriptinhalt",
- "scriptFile": "Skriptdatei",
- "scriptFileTooltip": "Wählen Sie ein PowerShell-Skript aus, mit dem das Vorhandensein der App auf dem Client erkannt wird. Wenn die App erkannt wird, stellt der Anforderungsprozess einen Exitcode mit dem Wert 0 bereit und schreibt einen Zeichenfolgenwert in STDOUT.",
- "scriptName": "Skriptname",
- "value": "Wert",
- "valueTooltip": "Wählen Sie einen Anforderungswert aus, der der ausgewählten Erkennungsmethode entspricht. Die Datums- und die Zeitanforderung müssen im lokalen Format eingegeben werden."
+ "DeploymentDeferralInDays": {
+ "label": "Updates verfügbar machen nach",
+ "units": "(Tage)",
+ "value": "{0} Tage"
+ },
+ "DriverAction": {
+ "header": "Wählen Sie unten eine Aktion aus.",
+ "label": "Treiberaktion",
+ "placeholder": "Aktion auswählen"
},
- "bladeTitle": "Anforderungsregel hinzufügen",
- "createRequirementHeader": "Erstellen Sie eine Anforderung.",
- "header": "Konfigurieren Sie zusätzliche Anforderungsregeln.",
- "label": "Zusätzliche Anforderungsregeln",
- "noRequirementsSelectedPlaceholder": "Keine Anforderungen angegeben.",
- "requirementType": "Anforderungstyp",
- "requirementTypeTooltip": "Wählen Sie den Typ der Erkennungsmethode aus, die festlegt, wie eine Anforderung überprüft wird."
- },
- "architectures": "Betriebssystemarchitektur",
- "architecturesTooltip": "Wählen Sie die Architekturen aus, die zum Installieren der App benötigt werden.",
- "bladeTitle": "Anforderungen",
- "diskSpace": "Erforderlicher Speicherplatz (MB)",
- "diskSpaceTooltip": "Der benötigte freie Speicherplatz auf dem Systemlaufwerk zum Installieren der App.",
- "header": "Geben Sie die Anforderungen an, die Geräte vor dem Installieren der App erfüllen müssen:",
- "maximumTextFieldValue": "Der Wert darf höchstens {0} betragen.",
- "minimumCpuSpeed": "Mindestens erforderliche CPU-Geschwindigkeit (MHz)",
- "minimumCpuSpeedTooltip": "Die mindestens erforderliche CPU-Geschwindigkeit zum Installieren der App.",
- "minimumLogicalProcessors": "Mindestens erforderliche Anzahl logischer Prozessoren",
- "minimumLogicalProcessorsTooltip": "Die mindestens erforderliche Anzahl logischer Prozessoren zum Installieren der App.",
- "minimumOperatingSystem": "Mindestens erforderliches Betriebssystem",
- "minimumOperatingSystemTooltip": "Wählen Sie das mindestens erforderliche Betriebssystem zum Installieren der App aus.",
- "minumumTextFieldValue": "Der Wert muss mindestens {0} sein.",
- "physicalMemory": "Erforderlicher physischer Speicher (MB)",
- "physicalMemoryTooltip": "Erforderlicher physischer Arbeitsspeicher (RAM) zum Installieren der App.",
- "selectorLabel": "Anforderungen",
- "validNumber": "Geben Sie eine gültige Zahl ein."
- },
- "PolicySet": {
- "appManagement": "Anwendungsverwaltung",
- "assignments": "Zuweisungen",
- "basics": "Grundlagen",
- "deviceEnrollment": "Geräteregistrierung",
- "deviceManagement": "Geräteverwaltung",
- "scopeTags": "Bereichstags",
- "appConfigurationTitle": "App-Konfigurationsrichtlinien",
- "appProtectionTitle": "App-Schutzrichtlinien",
- "appTitle": "Apps",
- "iOSAppProvisioningTitle": "iOS-App-Bereitstellungsprofile",
- "deviceLimitRestrictionTitle": "Einschränkungen zum Gerätelimit",
- "deviceTypeRestrictionTitle": "Einschränkungen zum Gerätetyp",
- "enrollmentStatusSettingTitle": "Registrierungsstatusseiten",
- "windowsAutopilotDeploymentProfileTitle": "Windows Autopilot Deployment-Profile",
- "deviceComplianceTitle": "Richtlinien zur Gerätekonformität",
- "deviceConfigurationTitle": "Profile für die Gerätekonfiguration",
- "powershellScriptTitle": "PowerShell-Skripts"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Eingeschlossene Treiber"
+ },
+ "SelectDrivers": {
+ "header": "Treiber auswählen, die in die Massenaktion einbezogen werden sollen"
+ },
+ "SelectDriversToInclude": {
+ "button": "Einzuschließende Treiber auswählen"
+ },
+ "SelectLessDrivers": {
+ "validation": "Es können höchstens einhundert Treiber ausgewählt werden"
+ },
+ "SelectMoreDrivers": {
+ "validation": "Mindestens ein Treiber muss ausgewählt werden."
+ },
+ "SelectedDrivers": {
+ "label": "Ausgewählte Treiber"
+ },
+ "availabilityDate": "In Windows Update verfügbar machen",
+ "bladeTitle": "Treiberupdates Windows 10 und höher (Vorschau)",
+ "lastSync": "Letzte Synchronisierung:",
+ "lastSyncDefaultText": "Erste Inventursammlung ausstehend",
+ "loadError": "Fehler beim Laden."
+ },
+ "DriverStatus": {
+ "approved": "Genehmigt",
+ "declined": "Abgelehnt",
+ "export": "Empfohlene Treiber werden exportiert",
+ "needsReview": "Überprüfung erforderlich",
+ "paused": "Angehalten"
+ },
+ "DriversToReview": {
+ "text": "{0} zum Überprüfen"
+ },
+ "Subtitle": {
+ "automatic": "Richtlinie für automatische Genehmigungstreiberupdates",
+ "manual": "Richtlinie für manuelle Genehmigungstreiberupdate"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Empfohlen",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrain",
- "countryNameZA": "Südafrika",
- "countryNameJO": "Jordanien",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Tschechische Republik",
- "countryNameLT": "Litauen",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hongkong (SAR)",
- "countryNameGH": "Ghana",
- "countryNameSA": "Saudi-Arabien",
- "countryNamePG": "Papua-Neuguinea",
- "countryNameBW": "Botsuana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "Indien",
- "countryNameHN": "Honduras",
- "countryNameRO": "Rumänien",
- "countryNameKZ": "Kasachstan",
- "countryNameLC": "St. Lucia",
- "countryNameGE": "Georgien",
- "countryNameTT": "Trinidad und Tobago",
- "countryNameMP": "Nördliche Marianen",
- "countryNameMV": "Malediven",
- "countryNameFI": "Finnland",
- "countryNameNO": "Norwegen",
- "countryNameEE": "Estland",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Usbekistan",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tadschikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "Frankreich",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italien",
- "countryNameAZ": "Aserbaidschan",
- "countryNameKG": "Kirgisistan",
- "countryNameWF": "Wallis und Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falklandinseln",
- "countryNameGY": "Guyana",
- "countryNameSS": "Südsudan",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Syrien",
- "countryNameMD": "Republik Moldau",
- "countryNameVC": "St. Vincent und die Grenadinen",
- "countryNameID": "Indonesien",
- "countryNameRE": "Réunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "Nordmazedonien",
- "countryNameTG": "Togo",
- "countryNamePF": "Französisch-Polynesien",
- "countryNameKY": "Kaimaninseln",
- "countryNameIO": "Britisches Territorium im Indischen Ozean",
- "countryNameRU": "Russland",
- "countryNameMA": "Marokko",
- "countryNameAU": "Australien",
- "countryNameBO": "Bolivien",
- "countryNameVA": "Heiliger Stuhl (Staat der Vatikanstadt)",
- "countryNameVG": "Britische Jungferninseln",
- "countryNameFM": "Mikronesien",
- "countryNameAQ": "Antarktis",
- "countryNameZM": "Sambia",
- "countryNameBR": "Brasilien",
- "countryNameIS": "Island",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgarien",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamas",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macau (SAR)",
- "countryNameRW": "Ruanda",
- "countryNameAS": "Amerikanisch-Samoa",
- "countryNameBQ": "Bonaire, St. Eustatius und Saba",
- "countryNameMF": "St. Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "Neukaledonien",
- "countryNameAC": "Ascension",
- "countryNameBN": "Brunei Darussalam",
- "countryNameBD": "Bangladesch",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabun",
- "countryNameCA": "Kanada",
- "countryNameSH": "St. Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolei",
- "countryNamePA": "Panama",
- "countryNameCM": "Kamerun",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japan",
- "countryNameCY": "Zypern",
- "countryNameCD": "Kongo, Demokratische Republik",
- "countryNameTN": "Tunesien",
- "countryNameTR": "Türkei",
- "countryNameWS": "Samoa",
- "countryNameSE": "Schweden",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Kambodscha",
- "countryNamePL": "Polen",
- "countryNameDZ": "Algerien",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominica",
- "countryNameEG": "Ägypten",
- "countryNameGF": "Französisch-Guyana",
- "countryNameNZ": "Neuseeland",
- "countryNamePS": "Palästinensische Behörde",
- "countryNameIL": "Israel",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Griechenland",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauretanien",
- "countryNameVI": "Amerikanische Jungferninseln",
- "countryNameGQ": "Äquatorialguinea",
- "countryNameMX": "Mexiko",
- "countryNameDJ": "Dschibuti",
- "countryNameGN": "Guinea",
- "countryNameCN": "China",
- "countryNameMZ": "Mosambik",
- "countryNameBV": "Bouvetinsel",
- "countryNameNF": "Norfolkinsel",
- "countryNameTZ": "Tansania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "Südgeorgien und die Südlichen Sandwichinseln",
- "countryNameRS": "Serbien",
- "countryNameCC": "Kokosinseln",
- "countryNameNA": "Namibia",
- "countryNameDE": "Deutschland",
- "countryNameCG": "Republik Kongo",
- "countryNameKW": "Kuwait",
- "countryNameMH": "Marshallinseln",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarus",
- "countryNameMY": "Malaysia",
- "countryNameST": "São Tomé und Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Tschad",
- "countryNameCX": "Weihnachtsinsel",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bissau",
- "countryNameUA": "Ukraine",
- "countryNameCU": "Kuba",
- "countryNameCO": "Kolumbien",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Kroatien",
- "countryNameSC": "Seychellen",
- "countryNameNL": "Niederlande",
- "countryNameUM": "Kleinere Amerikanische Überseeinseln",
- "countryNameIM": "Insel Man",
- "countryNameFJ": "Fidschi",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "Vereinigtes Königreich",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slowenien",
- "countryNameAM": "Armenien",
- "countryNameAR": "Argentinien",
- "countryNamePM": "St. Pierre und Miquelon",
- "countryNameTF": "Französische Süd- und Antarktisgebiete",
- "countryNameDO": "Dominikanische Republik",
- "countryNameZW": "Simbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugal",
- "countryNameCF": "Zentralafrikanische Republik",
- "countryNameBE": "Belgien",
- "countryNameKM": "Komoren",
- "countryNameLY": "Libyen",
- "countryNameIE": "Irland",
- "countryNameKP": "Nordkorea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slowakei",
- "countryNameTC": "Turks- und Caicosinseln",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Jemen",
- "countryNameBA": "Bosnien und Herzegowina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Irak",
- "countryNameSJ": "Spitzbergen und Jan Mayen Inseln",
- "countryNameAX": "Ålandinseln",
- "countryNameKE": "Kenia",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Färöer",
- "countryNameBL": "St. Barthélemy",
- "countryNameLB": "Libanon",
- "countryNameJM": "Jamaika",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Spanien",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapur",
- "countryNameAL": "Albanien",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d'Ivoire",
- "countryNameTW": "Taiwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cookinseln",
- "countryNameTH": "Thailand",
- "countryNameHM": "Heard und McDonaldinseln",
- "countryNameGD": "Grenada",
- "countryNameUS": "Vereinigte Staaten",
- "countryNameAT": "Österreich",
- "countryNameKR": "Republik Korea",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Dänemark",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Äthiopien",
- "countryNameMG": "Madagaskar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxemburg",
- "countryNameQA": "Katar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Solomonen",
- "countryNameAE": "Vereinigte Arabische Emirate",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua und Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Ungarn",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Schweiz",
- "countryNamePN": "Pitcairninseln",
- "countryNameGL": "Grönland",
- "countryNamePH": "Philippinen",
- "countryNameMT": "Malta",
- "countryNameKN": "St. Kitts und Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Lettland",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "{0}-Synchronisierung nicht möglich",
+ "failureDescription": "Es ist ein Fehler aufgetreten, und die angeforderte Synchronisierung konnte nicht abgeschlossen werden. Versuchen Sie es noch mal.",
+ "pending": "{0}-Synchronisierung wird durchgeführt",
+ "pendingDescription": "Die neuesten Daten werden abgerufen. Dieser Vorgang kann einige Minuten dauern.",
+ "success": "{0}-Synchronisierung abgeschlossen",
+ "successDescription": "Die Synchronisierung mit dem WUfB-Dienst wurde am {0} abgeschlossen."
+ },
+ "SyncSpinner": {
+ "text": "Eine Synchronisierung wird ausgeführt. Dies kann einige Minuten dauern. Suchen Sie nach einer Warnung, oder schauen Sie in ein paar Minuten noch einmal nach."
+ },
+ "TabName": {
+ "basics": "Grundlagen",
+ "driverUpdateSettings": "Einstellungen",
+ "otherDrivers": "Andere Treiber",
+ "properties": "Eigenschaften",
+ "recommendedDrivers": "Empfohlene Treiber"
+ },
+ "driverAddFilter": "Filter hinzufügen",
+ "driverApplicableDevices": "Anwendbare Geräte",
+ "driverApprovalStatus": "Status",
+ "driverBulkActions": "Massenvorgänge",
+ "driverClass": "Treiberklasse",
+ "driverCount": "Es werden die Datensätze {0} bis {1} von {2} Datensätzen angezeigt.",
+ "driverFilterNoneSelected": "Nichts ausgewählt",
+ "driverManufacturer": "Hersteller",
+ "driverName": "Treibername",
+ "driverNameLower": "Windows-Treiberupdatebereitstellung",
+ "driverNameUpper": "Bereitstellung von Windows-Treiberupdates",
+ "driverRefresh": "Aktualisieren",
+ "driverReleaseDate": "Releasedatum",
+ "driverSearch": "Suchen",
+ "driverSearchKeyword": "Suchschlüsselwort eingeben",
+ "driverVersion": "Version",
+ "firstDeploymentDate": "Erste Bereitstellung",
+ "infoBoxText": "Es kann bis zu 24 Stunden dauern, bis der Bestand aufgefüllt wird, nachdem eine Richtlinie zugewiesen und erstellt wurde.",
+ "textBlockText": "Wählen Sie Ihre Richtliniengenehmigungs- und Bereitstellungseinstellungen aus. Wählen Sie aus, ob Sie eine Richtlinie einrichten möchten, um Updates automatisch oder manuell zu genehmigen und bereitzustellen. Die Genehmigungsmethode kann nicht geändert werden, nachdem eine Richtlinie erstellt wurde. Änderungen an einzelnen Treibergenehmigungen und Bereitstellungsdetails sind jedoch möglich, sobald ein Inventar für zugewiesene Geräte erstellt wurde."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge-Konfigurationseinstellungen",
+ "edgeWindowsDataProtectionSettings": "Microsoft Edge-Datenschutzeinstellungen (Windows) – Vorschau",
+ "edgeWindowsSettings": "Microsoft Edge-Konfigurationseinstellungen (Windows) – Vorschau",
+ "generalAppConfig": "Allgemeine App-Konfiguration",
+ "generalSettings": "Allgemeine Konfigurationseinstellungen",
+ "outlookSMIMEConfig": "Outlook-S/MIME-Einstellungen",
+ "outlookSettings": "Outlook-Konfigurationseinstellungen",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-en.json b/Documentation/Strings-en.json
index c699d0c..694fc4d 100644
--- a/Documentation/Strings-en.json
+++ b/Documentation/Strings-en.json
@@ -1,4 +1,1691 @@
{
+ "InstallContextType": {
+ "device": "Device",
+ "deviceContext": "Device context",
+ "user": "User",
+ "userContext": "User context"
+ },
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "One block action is required for all compliance policies.",
+ "graceperiod": "Schedule (days after noncompliance)",
+ "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
+ "subtitle": "Specify action parameters",
+ "title": "Action parameters"
+ },
+ "List": {
+ "gracePeriodDay": "{0} day after noncompliance",
+ "gracePeriodDays": "{0} days after noncompliance",
+ "gracePeriodHour": "{0} hour after noncompliance",
+ "gracePeriodHours": "{0} hours after noncompliance",
+ "gracePeriodMinute": "{0} minute after noncompliance",
+ "gracePeriodMinutes": "{0} minutes after noncompliance",
+ "immediately": "Immediately",
+ "schedule": "Schedule",
+ "scheduleInfoBalloon": "Days after noncompliance",
+ "subtitle": "Specify the sequence of actions on noncompliant devices",
+ "title": "Actions"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Others",
+ "additionalRecipients": "Additional recipients (via email)",
+ "additionalRecipientsBladeTitle": "Select additional recipients",
+ "emailAddressPrompt": "Enter email addresses (separated by commas)",
+ "invalidEmail": "Invalid email address",
+ "messageTemplate": "Message template",
+ "noneSelected": "None selected",
+ "notSelected": "Not selected",
+ "numSelected": "{0} selected",
+ "selected": "Selected"
+ },
+ "block": "Mark device noncompliant",
+ "lockDevice": "Lock device (local action)",
+ "lockDeviceWithPasscode": "Lock device (local action)",
+ "noAction": "No action",
+ "noActionRow": "No actions, select 'Add' to add an action",
+ "pushNotification": "Send push notification to end user",
+ "remoteLock": "Remotely lock the noncompliant device",
+ "removeSourceAccessProfile": "Remove source access profile",
+ "retire": "Add device to retire list",
+ "wipe": "Wipe",
+ "emailNotification": "Send email to end user"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Admin Groups",
+ "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
+ "rolesMenuTitle": "Endpoint Manager roles",
+ "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
+ "RoleAssignmentScope": "Scope Groups"
+ },
+ "AppInformationTab": {
+ "Info": {
+ "AppStoreUrl": {
+ "android": "Enter the link to the app listing in Google Play store. For example:",
+ "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
+ "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
+ "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
+ "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
+ "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
+ "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ },
+ "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
+ "applicableDeviceType": "Select the device types that can install this app.",
+ "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
+ "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
+ "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
+ "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
+ "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
+ "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
+ "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
+ "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
+ "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
+ "learnMore": "Learn more",
+ "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
+ "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
+ "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
+ "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
+ "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
+ "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
+ "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
+ "packageId": "The app Package Identifier is the unique value that identifies the app.",
+ "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
+ "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
+ "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
+ "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
+ "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
+ "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
+ "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
+ "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
+ "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
+ "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
+ },
+ "descriptionPreview": "Preview",
+ "descriptionRequired": "Description is required.",
+ "editDescription": "Edit Description",
+ "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
+ "name": "App information",
+ "nameForOfficeSuitApp": "App suite information"
+ },
+ "ScopeTypes": {
+ "allDevices": "All Devices",
+ "allUsers": "All Users",
+ "allUsersAndDevices": "All Users & All Devices",
+ "selectedGroups": "Selected Groups"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Description",
+ "placeholder": "Enter a description"
+ },
+ "NameTextBox": {
+ "label": "Name",
+ "placeholder": "Enter a name"
+ },
+ "PublisherTextBox": {
+ "label": "Publisher",
+ "placeholder": "Enter a publisher"
+ },
+ "VersionTextBox": {
+ "label": "Version"
+ },
+ "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
+ },
+ "ScopeTags": {
+ "headerDescription": "Select one or more groups to assign the script package."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Detection script",
+ "placeholder": "Input script text",
+ "requiredValidationMessage": "Please enter the detection script"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Enforce script signature check"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Run this script using the logged-on credentials"
+ },
+ "RemediationScript": {
+ "infoBox": "This script will run in detect-only mode because there is no remediation script."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Remediation script",
+ "placeholder": "Input script text"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Run script in 64-bit PowerShell"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
+ },
+ "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
+ "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
+ },
+ "title": "Create custom script",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Interval",
+ "time": "Date and time"
+ },
+ "Interval": {
+ "day": "Repeats every day",
+ "days": "Repeats every {0} days",
+ "hour": "Repeats every hour",
+ "hours": "Repeats every {0} hours",
+ "month": "Repeats every month",
+ "months": "Repeats every {0} months",
+ "week": "Repeats every week",
+ "weeks": "Repeats every {0} weeks"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) on {1}",
+ "withDate": "{0} on {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Edit - {0}"
+ }
+ },
+ "MinimumOperatingSystem": {
+ "Android": {
+ "v10": "Android 10.0",
+ "v11": "Android 11.0",
+ "v4": "Android 4.0 (Ice Cream Sandwich)",
+ "v403": "Android 4.0.3 (Ice Cream Sandwich)",
+ "v41": "Android 4.1 (Jelly Bean)",
+ "v42": "Android 4.2 (Jelly Bean)",
+ "v43": "Android 4.3 (Jelly Bean)",
+ "v44": "Android 4.4 (KitKat)",
+ "v5": "Android 5.0 (Lollipop)",
+ "v51": "Android 5.1 (Lollipop)",
+ "v6": "Android 6.0 (Marshmallow)",
+ "v7": "Android 7.0 (Nougat)",
+ "v71": "Android 7.1 (Nougat)",
+ "v8": "Android 8.0 (Oreo)",
+ "v81": "Android 8.1 (Oreo)",
+ "v9": "Android 9.0 (Pie)"
+ },
+ "IOS": {
+ "v10": "iOS 10.0",
+ "v11": "iOS 11.0",
+ "v12": "iOS 12.0",
+ "v13": "iOS 13.0",
+ "v14": "iOS 14.0",
+ "v15": "iOS 15.0",
+ "v16": "iOS 16.0",
+ "v17": "iOS 17.0",
+ "v8": "iOS 8.0",
+ "v9": "iOS 9.0"
+ },
+ "MacOS": {
+ "V10": {
+ "10": "OS X Yosemite 10.10",
+ "11": "OS X El Capitan 10.11",
+ "12": "macOS Sierra 10.12",
+ "13": "macOS High Sierra 10.13",
+ "14": "macOS Mojave 10.14",
+ "15": "macOS Catalina 10.15",
+ "7": "Mac OS X Lion 10.7",
+ "8": "OS X Mountain Lion 10.8",
+ "9": "OS X Mavericks 10.9"
+ },
+ "V11": {
+ "0": "macOS Big Sur 11.0"
+ },
+ "V12": {
+ "0": "macOS Monterey 12.0"
+ },
+ "V13": {
+ "0": "macOS Ventura 13.0"
+ },
+ "V14": {
+ "0": "macOS Sonoma 14.0"
+ }
+ },
+ "Windows": {
+ "V10Release": {
+ "release1607": "Windows 10 1607",
+ "release1703": "Windows 10 1703",
+ "release1709": "Windows 10 1709",
+ "release1803": "Windows 10 1803",
+ "release1809": "Windows 10 1809",
+ "release1903": "Windows 10 1903",
+ "release1909": "Windows 10 1909",
+ "release2004": "Windows 10 2004",
+ "release21H1": "Windows 10 21H1",
+ "release21H2": "Windows 10 21H2",
+ "release22H2": "Windows 10 22H2",
+ "release2H20": "Windows 10 20H2"
+ },
+ "V11Release": {
+ "release21H2": "Windows 11 21H2",
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
+ },
+ "v10": "Windows 10.0",
+ "v80": "Windows 8.0",
+ "v81": "Windows 8.1"
+ },
+ "WindowsPhone": {
+ "v80": "Windows Phone 8.0",
+ "v81": "Windows Phone 8.1"
+ }
+ },
+ "OfficeUpdateChannel": {
+ "current": "Current Channel",
+ "deferred": "Semi-Annual Enterprise Channel",
+ "firstReleaseCurrent": "Current Channel (Preview)",
+ "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
+ "monthlyEnterprise": "Monthly Enterprise Channel",
+ "placeHolder": "Select one"
+ },
+ "TableHeaders": {
+ "activity": "Activity",
+ "activityName": "Activity name",
+ "actor": "Initiated by (actor)",
+ "actorType": "Actor type",
+ "app": "App",
+ "appName": "App name",
+ "applicationName": "Application name",
+ "approvalType": "Approval method",
+ "assignedGroups": "Group",
+ "assignment": "Assignment",
+ "assignmentStatus": "Assigned",
+ "assignments": "Assignments",
+ "attributeName": "Attribute name",
+ "attributeType": "Attribute type",
+ "bundleId": "Bundle-Id",
+ "category": "Category",
+ "complianceGracePeriodExpiration": "Compliance grace period expiration",
+ "configurationType": "Profile type",
+ "conflictingPolicy": "Conflicting Policies",
+ "createdDate": "Created date",
+ "currentOs": "Current OS",
+ "date": "Date",
+ "dateRange": "Date range",
+ "deployed": "Deployed",
+ "description": "Description",
+ "device": "Device",
+ "deviceId": "Device ID",
+ "deviceName": "Device name",
+ "deviceOrApplicationName": "Device or application name",
+ "deviceReporting": "Devices reporting",
+ "diagnosticCode": "Diagnostic Code",
+ "diagnosticText": "Diagnostic Text",
+ "diagnostics": "Diagnostics",
+ "displayName": "Display name",
+ "driversToReview": "Drivers to review",
+ "eSIMActivationStatus": "Activation status",
+ "eSIMCellularStatus": "Cellular status",
+ "eSIMICCID": "ICCID",
+ "eSIMPoolName": "Cellular subscription",
+ "eSIMState": "eSIM state",
+ "eSIMTokenAmount": "Total eSIM activation codes",
+ "enabled": "Enabled",
+ "enabledPlatforms": "Enabled Platforms",
+ "encryptionReadiness": "Encryption Readiness",
+ "encryptionStatus": "Encryption Status",
+ "endTime": "End time",
+ "enrollment": "Enrollment",
+ "enrollmentAttempt": "Enrollment start",
+ "eventDateTime": "Timestamp",
+ "eventIdentifier": "Event ID",
+ "eventLevel": "Level",
+ "excluded": "Excluded",
+ "failure": "Failure",
+ "featureUpdateDeferral": "Feature Deferral",
+ "featureUpdateVersion": "Feature Update Version",
+ "featureUpdatesPaused": "Feature (Paused)",
+ "featureUpdatesStatus": "Feature",
+ "from": "From",
+ "groups": "Groups",
+ "groupsSelected": "Groups Selected",
+ "installationStatus": "Installation Status",
+ "issueId": "Issue id",
+ "lastCheckinTime": "Last Check-in Time",
+ "lastModified": "Last modified",
+ "lastScanTime": "Last Scan Time",
+ "lastSuccessfulSync": "Last Successful Sync",
+ "lastUpdated": "Last Updated",
+ "location": "Location",
+ "loggedInUser": "Logged in user",
+ "message": "Message",
+ "model": "Model",
+ "mtdConnector": "MTD Connector",
+ "name": "Profile name",
+ "oSVersion": "OS Version",
+ "operationType": "Operation type",
+ "os": "OS",
+ "packageName": "Package name",
+ "partnerName": "Partner",
+ "partnerStatus": "Partner status",
+ "permission": "Permission",
+ "platform": "Platform",
+ "policies": "Policies",
+ "policy": "Policy",
+ "policyType": "Policy type",
+ "preventedUpdateDays": "Restricted days",
+ "priority": "Priority",
+ "profiles": "Profiles",
+ "publicAddress": "Public address",
+ "publisher": "Publisher",
+ "qualityUpdateDeferral": "Quality Deferral",
+ "qualityUpdateRelease": "Quality Update Release",
+ "qualityUpdateVersion": "Quality Update Version",
+ "qualityUpdatesPaused": "Quality (Paused)",
+ "qualityUpdatesStatus": "Quality",
+ "reason": "Reason",
+ "resource": "Resource",
+ "roleName": "Name",
+ "roles": "Roles",
+ "scopeGroups": "Scope groups",
+ "scopeSize": "Assigned Scope Groups",
+ "scopeTags": "Scope tags",
+ "scriptName": "Script name",
+ "scriptType": "Script type",
+ "servicingOption": "Servicing channel",
+ "setting": "Setting",
+ "settings": "Settings",
+ "siteName": "Site name",
+ "source": "Source",
+ "sourceProfile": "Source Profile",
+ "startTime": "Start time",
+ "state": "State",
+ "stateDetails": "State details",
+ "status": "Status",
+ "subject": "Subject",
+ "support": "Support",
+ "supportEndDate": "Support End Date",
+ "tPMVersion": "TPM Version",
+ "target": "Target",
+ "timeWindows": "Time windows",
+ "timeZone": "Time zone",
+ "type": "Type",
+ "updateScheduleType": "Schedule type",
+ "updateStatus": "Update Status",
+ "user": "User",
+ "userPrincipalName": "User principal name",
+ "users": "Users",
+ "usersExcluded": "Users excluded",
+ "usersTargeted": "Users targeted",
+ "value": "Value",
+ "includedGroups": "Included Groups",
+ "excludedGroups": "Excluded Groups",
+ "licenseType": "License type"
+ },
+ "Inputs": {
+ "accountDomain": "Account domain",
+ "accountDomainHint": "e.g. contosodomain",
+ "accountDomainInfoBalloon": "Specify the user’s account domain.",
+ "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
+ "allowContactSetting": "Allow user to change contact setting",
+ "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
+ "allowUserChange": "Allow user to change setting",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
+ "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "App install context",
+ "appUrlLabel": "Appstore URL",
+ "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Applicable device type",
+ "assignmentActionLabel": "Mode",
+ "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
+ "authenticationMetod": "Authentication method",
+ "authenticationType": "Authentication type",
+ "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
+ "availableLicenseCount": "Available licenses",
+ "basicAuth": "Basic authentication",
+ "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
+ "bookNameLabel": "Book name",
+ "bundleDescriptionHint": "Enter a description that describes the apps included.",
+ "calendar": "Calendar",
+ "categoryLabel": "Category",
+ "categoryNameLabel": "Default name",
+ "certProfileType": "Certificate profile type",
+ "certificate": "Certificate",
+ "certificates": "Certificates",
+ "commandLineLabel": "Command-line arguments",
+ "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
+ "configurationSettingsFormatLabel": "Configuration settings format",
+ "configurationSettingsLabel": "Settings format",
+ "contactSync": "Save Contacts",
+ "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
+ "contacts": "Contacts",
+ "createdDateTime": "Created",
+ "defaultCategoryHint": "Default categories cannot be changed",
+ "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
+ "descriptionGenericLabel": "Description",
+ "descriptionHint": "Enter a description...",
+ "descriptionLabel": "Description",
+ "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
+ "developerLabel": "Developer",
+ "developerSizeHint": "The maximum length of the developer name is 256 characters.",
+ "disable": "Disable",
+ "disabled": "Disabled",
+ "displayNameLabel": "Name",
+ "displayVersionHint": "Enter the app version",
+ "displayVersionLabel": "App Version",
+ "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
+ "eBookCategoryNameLabel": "Default name",
+ "emailAccount": "Email account name",
+ "emailAccountHint": "e.g. Corporate Email",
+ "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
+ "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
+ "emailServer": "Email Server",
+ "emailServerHint": "e.g. mail.contoso.com",
+ "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
+ "enable": "Enable",
+ "enableSMime": "Enable S/MIME",
+ "enabled": "Enabled",
+ "encryptAllEmails": "Encrypt all emails",
+ "encryptionCertificates": "Encryption certificates",
+ "endUserNotifications": "End-user notifications",
+ "enrollmentTypeLabel": "Device enrollment type",
+ "externalRecipients": "External recipients MailTip",
+ "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
+ "focusedInbox": "Focused Inbox",
+ "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
+ "fullScreenEnabledLabel": "Full screen",
+ "gmailNineAmountOfEmail": "Amount of email to synchronize",
+ "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
+ "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
+ "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
+ "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
+ "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
+ "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
+ "ignoreManifestScope": "Ignore manifest scope",
+ "ignoreVersionDetection": "Ignore app version",
+ "informationUrlLabel": "Information URL",
+ "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
+ "installAsManaged": "Install as managed",
+ "installationSourceLabel": "App type",
+ "installerTypeInfoBalloon": "The installer type of the application package.",
+ "installerTypeLabel": "Installer Type",
+ "isFeatured": "Show this as a featured app in the Company Portal",
+ "isMAMEnabledToggleLabel": "Yes",
+ "lastModifiedDateTime": "Last updated Time",
+ "ldapUrl": "LDAP URL",
+ "licensingType": "Supports device context assignment",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimum operating system",
+ "modernAuth": "Modern authentication",
+ "nameHint": "Enter a name",
+ "nameLabel": "Name",
+ "nameSizeHint": "The maximum length of the name is 512 characters.",
+ "notConfigured": "Not configured",
+ "notesLabel": "Notes",
+ "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
+ "notificationType": "Notification type",
+ "oneDay": "One Day",
+ "oneMonth": "One Month",
+ "oneWeek": "One Week",
+ "outlookSMimeSettings": "Outlook S/MIME settings",
+ "ownerLabel": "Owner",
+ "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
+ "packageIdLabel": "Package Identifier",
+ "packageNameLabel": "Package name",
+ "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
+ "platformLabel": "Platform",
+ "policyDescriptionLabel": "Description",
+ "policyNameLabel": "Name",
+ "preComposedIconEnabled": "Precomposed",
+ "primarySMTPAddress": "Primary SMTP Address",
+ "privacyUrlLabel": "Privacy URL",
+ "publisherHint": "Enter a publisher name",
+ "publisherLabel": "Publisher",
+ "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
+ "require": "Require",
+ "requireBiometrics": "Require Biometrics to access app",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "At least one scope tag is required",
+ "searchAppLabel": "Select app",
+ "searchAppLinkText": "Search the App Store",
+ "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
+ "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
+ "selectAAD": "Select a Microsoft Entra attribute",
+ "selectAppFileLabel": "Select file",
+ "selectAppFileLinkText": "Select app package file",
+ "selectAppFileToUpdateLabel": "Select file to update",
+ "selectAuthMethod": "Select an authentication method",
+ "selectAuthType": "Select an authentication type",
+ "selectCatalogAppLabel": "Select app",
+ "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
+ "selectCertificate": "Select a certificate",
+ "signAllEmails": "Sign all emails",
+ "signingCertificates": "Signing certificates",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Suite Description",
+ "suiteNameLabel": "Suite Name",
+ "targetApplicationBundleIdentifier": "Target application bundle identifier",
+ "targetedPlatformsLabel": "Targeted platform",
+ "tasks": "Tasks",
+ "threeDays": "Three Days",
+ "totalLicenseCount": "Total licenses",
+ "twoWeeks": "Two Weeks",
+ "unifiedAssignmentsLabel": "Assign to:",
+ "unlimited": "Unlimited",
+ "urlHint": "Enter a valid url",
+ "useManagedBrowserHint": "Android and iOS only. Learn more",
+ "useManagedBrowserLabel": "Require a managed browser to open this link",
+ "userPrinicipalName": "User Principal Name",
+ "username": "Username",
+ "usernameAttribute": "Username attribute from Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
+ "usernamePassword": "Username and password",
+ "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
+ "webAppUrlLabel": "App URL",
+ "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
+ "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "XML Data Entered",
+ "xmlFormatInvalid": "XML policy format is invalid.",
+ "xmlTooLarge": "Input size must be less than 1 MB."
+ },
+ "CoManagementAuthority": {
+ "Confirmation": {
+ "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
+ "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
+ },
+ "Grid": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
+ "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
+ "label": "Co-management authority"
+ },
+ "Header": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
+ },
+ "Main": {
+ "title": "Co-management Authority"
+ },
+ "MessageSaved": {
+ "body": "Co-management authority policy created."
+ },
+ "Notification": {
+ "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
+ "created": "This Co-management authority policy has not been assigned to any users.",
+ "creating": "Creating Co-management authority policy",
+ "creatingMessage": "Creating {0} Co-management authority policy",
+ "deleteError": "An error occurred while deleting Co-management authority policy",
+ "deleted": "Co-management authority policy deleted.",
+ "deletedMessage": "{0} Co-management authority policy is deleted.",
+ "deleting": "Deleting Co-management Authority policy",
+ "deletingMessage": "Deleting {0} Co-management Authority policy",
+ "fetchError": "An error occurred while displaying Co-management authority policies",
+ "saved": "Co-management Authority saved.",
+ "savedMessage": "{0} Co-management Authority policy successfully saved.",
+ "saving": "Saving Co-management authority",
+ "savingMessage": "Saving {0} Co-management authority policy"
+ },
+ "Priority": {
+ "saveError": "An error occurred while saving Co-management authority priorities",
+ "saved": "Co-management authority priorities were successfully saved."
+ },
+ "ReloadNotification": {
+ "description": "Reload the Co-management authority policy to try again.",
+ "title": "Reload the Co-management authority blade"
+ },
+ "advancedProperty": "Advanced",
+ "commandLineArgs": "Client installation command line arguments.",
+ "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
+ "enterArgument": "Enter argument",
+ "installAgent": "Automatically install Configuration Manager agent.",
+ "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
+ "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
+ "pageDescription": "Co-management authority profiles",
+ "pageSetting": "Co-management authority Setting",
+ "pageTitle": "Co-management authority",
+ "settingDescription": "The co-management settings determine who owns the workloads."
+ },
+ "AzureIAMCommon": {
+ "Recommended": "Recommended",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrain",
+ "countryNameZA": "South Africa",
+ "countryNameJO": "Jordan",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Czech Republic",
+ "countryNameLT": "Lithuania",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hong Kong SAR",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Saudi Arabia",
+ "countryNamePG": "Papua New Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "India",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Romania",
+ "countryNameKZ": "Kazakhstan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Georgia",
+ "countryNameTT": "Trinidad and Tobago",
+ "countryNameMP": "Northern Mariana Islands",
+ "countryNameMV": "Maldives",
+ "countryNameFI": "Finland",
+ "countryNameNO": "Norway",
+ "countryNameEE": "Estonia",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Uzbekistan",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tajikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "France",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italy",
+ "countryNameAZ": "Azerbaijan",
+ "countryNameKG": "Kyrgyzstan",
+ "countryNameWF": "Wallis and Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falkland Islands (Islas Malvinas)",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "South Sudan",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Syria",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "Saint Vincent and the Grenadines",
+ "countryNameID": "Indonesia",
+ "countryNameRE": "Reunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "North Macedonia",
+ "countryNameTG": "Togo",
+ "countryNamePF": "French Polynesia",
+ "countryNameKY": "Cayman Islands",
+ "countryNameIO": "British Indian Ocean Territory",
+ "countryNameRU": "Russia",
+ "countryNameMA": "Morocco",
+ "countryNameAU": "Australia",
+ "countryNameBO": "Bolivia",
+ "countryNameVA": "Holy See (Vatican City State)",
+ "countryNameVG": "Virgin Islands, British",
+ "countryNameFM": "Micronesia",
+ "countryNameAQ": "Antarctica",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brazil",
+ "countryNameIS": "Iceland",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgaria",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamas, The",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macao SAR",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "American Samoa",
+ "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
+ "countryNameMF": "Saint Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "New Caledonia",
+ "countryNameAC": "Ascension Island",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladesh",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Canada",
+ "countryNameSH": "Saint Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolia",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Cameroon",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japan",
+ "countryNameCY": "Cyprus",
+ "countryNameCD": "Democratic Republic of Congo",
+ "countryNameTN": "Tunisia",
+ "countryNameTR": "Türkiye",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Sweden",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Cambodia",
+ "countryNamePL": "Poland",
+ "countryNameDZ": "Algeria",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Egypt",
+ "countryNameGF": "French Guiana",
+ "countryNameNZ": "New Zealand",
+ "countryNamePS": "Palestinian Authority",
+ "countryNameIL": "Israel",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Greece",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauritania",
+ "countryNameVI": "Virgin Islands, U.S.",
+ "countryNameGQ": "Equatorial Guinea",
+ "countryNameMX": "Mexico",
+ "countryNameDJ": "Djibouti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "China",
+ "countryNameMZ": "Mozambique",
+ "countryNameBV": "Bouvet Island",
+ "countryNameNF": "Norfolk Island",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "South Georgia and the South Sandwich Islands",
+ "countryNameRS": "Serbia",
+ "countryNameCC": "Cocos (Keeling) Islands",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Germany",
+ "countryNameCG": "Republic of Congo",
+ "countryNameKW": "Kuwait",
+ "countryNameMH": "Marshall Islands",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarus",
+ "countryNameMY": "Malaysia",
+ "countryNameST": "São Tomé and Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Chad",
+ "countryNameCX": "Christmas Island",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bissau",
+ "countryNameUA": "Ukraine",
+ "countryNameCU": "Cuba",
+ "countryNameCO": "Colombia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Croatia",
+ "countryNameSC": "Seychelles",
+ "countryNameNL": "Netherlands",
+ "countryNameUM": "US Minor Outlying Islands",
+ "countryNameIM": "Isle of Man",
+ "countryNameFJ": "Fiji",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "United Kingdom",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovenia",
+ "countryNameAM": "Armenia",
+ "countryNameAR": "Argentina",
+ "countryNamePM": "Saint Pierre and Miquelon",
+ "countryNameTF": "French Southern and Antarctic Lands",
+ "countryNameDO": "Dominican Republic",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "Central African Republic",
+ "countryNameBE": "Belgium",
+ "countryNameKM": "Comoros",
+ "countryNameLY": "Libya",
+ "countryNameIE": "Ireland",
+ "countryNameKP": "North Korea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slovakia",
+ "countryNameTC": "Turks and Caicos Islands",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Yemen",
+ "countryNameBA": "Bosnia and Herzegovina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Iraq",
+ "countryNameSJ": "Svalbard and Jan Mayen Island",
+ "countryNameAX": "Åland Islands",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Faroe Islands",
+ "countryNameBL": "Saint Barthélemy",
+ "countryNameLB": "Lebanon",
+ "countryNameJM": "Jamaica",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Spain",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapore",
+ "countryNameAL": "Albania",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d’Ivoire",
+ "countryNameTW": "Taiwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cook Islands",
+ "countryNameTH": "Thailand",
+ "countryNameHM": "Heard Island and McDonald Islands",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "United States",
+ "countryNameAT": "Austria",
+ "countryNameKR": "Korea, Republic of",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Denmark",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Ethiopia",
+ "countryNameMG": "Madagascar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxembourg",
+ "countryNameQA": "Qatar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Solomon Islands",
+ "countryNameAE": "United Arab Emirates",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua and Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Hungary",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Switzerland",
+ "countryNamePN": "Pitcairn Islands",
+ "countryNameGL": "Greenland",
+ "countryNamePH": "Philippines",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts and Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Latvia",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Author",
+ "template": "Template name"
+ },
+ "Row": {
+ "ariaLabel": "row {0} of {1} column {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Start from scratch and select settings you want from the library of available settings",
+ "title": "Settings catalog"
+ },
+ "Templates": {
+ "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
+ "title": "Templates"
+ },
+ "noData": "No policy templates found"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Endpoint detection and response"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "App and browser isolation",
+ "aSRApplicationControl": "Application control",
+ "aSRAttackSurfaceReduction": "Attack surface reduction rules",
+ "aSRDeviceControl": "Device control",
+ "aSRExploitProtection": "Exploit protection",
+ "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
+ "aVExclusions": "Microsoft Defender Antivirus exclusions",
+ "antivirus": "Microsoft Defender Antivirus",
+ "cloudPC": "Windows 365 Security Baseline",
+ "default": "Endpoint Security",
+ "defenderTest": "Microsoft Defender for Endpoint demo",
+ "diskEncryption": "BitLocker",
+ "eDR": "Endpoint detection and response",
+ "edgeSecurityBaseline": "Microsoft Edge baseline",
+ "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
+ "editionUpgradeConfiguration": "Edition upgrade and mode switch",
+ "firewall": "Windows Firewall",
+ "firewallRules": "Windows Firewall rules",
+ "identityProtection": "Account protection",
+ "identityProtectionPreview": "Account protection (preview)",
+ "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
+ "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
+ "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
+ "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS firewall",
+ "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
+ "office365Baseline": "Microsoft Office O365 baseline",
+ "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
+ "securityBaselines": "Security Baselines",
+ "test": "Test Template",
+ "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
+ "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
+ "windowsSecurityExperience": "Windows Security experience"
+ },
+ "Firewall": {
+ "mDE": "Windows Firewall"
+ },
+ "FirewallRules": {
+ "mDE": "Windows Firewall Rules"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Account Protection",
+ "administrativeTemplates": "Administrative Templates",
+ "androidCompliancePolicy": "Android compliance policy",
+ "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
+ "applicationControl": "App Control for Business",
+ "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
+ "bitlocker": "BitLocker",
+ "custom": "Custom",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedPersonalIdentityVerificationCredential": "Derived credential",
+ "deviceControl": "Device Control",
+ "deviceFeatures": "Device features",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Device Lock",
+ "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
+ "deviceRestrictions": "Device restrictions",
+ "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
+ "domainJoinPreview": "Domain Join",
+ "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
+ "education": "Education",
+ "email": "Email",
+ "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
+ "endpointProtection": "Endpoint protection",
+ "expeditedCheckin": "Mobile device management configuration",
+ "exploitProtection": "Exploit Protection",
+ "extensions": "Extensions",
+ "hardwareConfigurations": "BIOS Configurations and other settings",
+ "identityProtection": "Identity protection",
+ "iosCompliancePolicy": "iOS compliance policy",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Local user group membership",
+ "macCompliancePolicy": "Mac compliance policy",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
+ "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
+ "microsoftDefenderFirewallRules": "Windows Firewall Rules",
+ "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
+ "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
+ "mxProfileZebraOnly": "MX profile (Zebra only)",
+ "networkBoundary": "Network boundary",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Override Group Policy",
+ "pkcsCertificate": "PKCS certificate",
+ "pkcsImportedCertificate": "PKCS imported certificate",
+ "preferenceFile": "Preference file",
+ "presets": "Presets",
+ "scepCertificate": "SCEP certificate",
+ "secureAssessmentEducation": "Secure assessment (Education)",
+ "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
+ "settingsCatalog": "Settings Catalog",
+ "sharedMultiUserDevice": "Shared multi-user device",
+ "softwareUpdates": "Software Updates",
+ "trustedCertificate": "Trusted certificate",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi import",
+ "windows10CompliancePolicy": "Windows 10/11 compliance policy",
+ "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
+ "windows10XScep": "SCEP certificate - TEST",
+ "windows10XTrustedCertificate": "Trusted certificate - TEST",
+ "windows10XVPN": "VPN - TEST",
+ "windows10XWifi": "WIFI - TEST",
+ "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
+ "windows365SecurityBaseline": "Windows 365 Security Baseline",
+ "windows8CompliancePolicy": "Windows 8 compliance policy",
+ "windowsHealthMonitoring": "Windows health monitoring",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
+ "windowsUpdateforBusiness": "Windows Update for Business",
+ "wiredNetwork": "Wired network",
+ "workProfile": "Personally-owned work profile"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Make update available gradually",
+ "immediateStart": "Make update available as soon as possible",
+ "startDateOnly": "Make update available on a specific date"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Auto deny",
+ "autoGrant": "Auto grant",
+ "prompt": "Prompt"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Location access (coarse)",
+ "accessFineLocation": "Location access (fine)",
+ "addVoicemail": "Add voicemail",
+ "bodySensors": "Allow body sensor data",
+ "bodySensorsBackground": "Allow background body sensor data",
+ "callPhone": "Make phone calls",
+ "camera": "Camera",
+ "getAccounts": "Get accounts",
+ "nearbyDevices": "Nearby Devices",
+ "nearbyWifiDevices": "Nearby Wifi Devices",
+ "postNotifications": "Post notifications",
+ "processOutgoingCalls": "Process outgoing calls",
+ "readCalendar": "Calendar (read)",
+ "readCallLog": "Call log (read)",
+ "readContacts": "Contacts (read)",
+ "readExternalStorage": "External storage (read)",
+ "readMediaAudio": "Media Audio (read)",
+ "readMediaImages": "Media Images (read)",
+ "readMediaVideo": "Media Video (read)",
+ "readPhoneState": "Phone state (read)",
+ "readSMS": "SMS (read)",
+ "receiveMMS": "MMS (receive)",
+ "receiveSMS": "SMS (receive)",
+ "receiveWAPPush": "WAP push messages (receive)",
+ "recordAudio": "Record audio",
+ "sendSMS": "SMS (send)",
+ "useSIP": "Use SIP service",
+ "writeCalendar": "Calendar (write)",
+ "writeCallLog": "Call log (write)",
+ "writeContacts": "Contacts (write)",
+ "writeExternalStorage": "External storage (write)"
+ },
+ "RemoveDialog": {
+ "description": "Are you sure you want to remove the permission?",
+ "title": "Remove"
+ },
+ "TableHeader": {
+ "permission": "Permission",
+ "permissionGroup": "Permission group",
+ "permissionName": "Permission name",
+ "permissionState": "Permission state"
+ },
+ "addButtonLabel": "+Add",
+ "addPermissionTableDescription": "Specify permissions you want to override. If they are not chosen/specified explicitly, then the default behavior will apply.",
+ "addPermissionsTitle": "Add permissions",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Learn more about Android runtime permissions",
+ "permissionTableDescription": "Permissions granted here will override the “Default app permissions” policy for the selected apps.",
+ "permissionsTitle": "Permissions"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search as default",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype for Business",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "The file or folder as the selected requirement.",
+ "pathToolTip": "The complete path of the file or folder to detect.",
+ "property": "Property",
+ "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "GridColumns": {
+ "pathOrScript": "Path/Script",
+ "type": "Type"
+ },
+ "Registry": {
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the comparison.",
+ "registryRequirement": "Registry key requirement",
+ "registryRequirementTooltip": "Select the registry key requirement comparison.",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the required registry value."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "File",
+ "registry": "Registry",
+ "script": "Script"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Boolean",
+ "dateTime": "Date and Time",
+ "float": "Floating Point",
+ "integer": "Integer",
+ "string": "String",
+ "version": "Version"
+ },
+ "duplicateName": "Script name {0} has already been used. Please enter a different name.",
+ "enforceSignatureCheck": "Enforce script signature check",
+ "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
+ "loggedOnCredentials": "Run this script using the logged on credentials",
+ "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
+ "operatorTooltip": "Select the operator for the requirement comparison.",
+ "requirementMethod": "Select output data type",
+ "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
+ "scriptName": "Script name",
+ "value": "Value",
+ "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "bladeTitle": "Add a Requirement rule",
+ "createRequirementHeader": "Create a requirement.",
+ "header": "Configure additional requirement rules",
+ "label": "Additional requirement rules",
+ "noRequirementsSelectedPlaceholder": "No requirements are specified.",
+ "requirementType": "Requirement type",
+ "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
+ },
+ "architectures": "Operating system architecture",
+ "architecturesTooltip": "Choose the architectures needed to install the app.",
+ "bladeTitle": "Requirements",
+ "diskSpace": "Disk space required (MB)",
+ "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
+ "header": "Specify the requirements that devices must meet before the app is installed:",
+ "maximumTextFieldValue": "The value must be at most {0}.",
+ "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
+ "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
+ "minimumLogicalProcessors": "Minimum number of logical processors required",
+ "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
+ "minimumOperatingSystem": "Minimum operating system",
+ "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
+ "minumumTextFieldValue": "The value must be at least {0}.",
+ "physicalMemory": "Physical memory required (MB)",
+ "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
+ "selectorLabel": "Requirements",
+ "validNumber": "Please enter a valid number."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filter",
+ "assignmentFilterTypeColumnHeader": "Filter mode",
+ "assignmentToast": "End user notifications",
+ "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
+ "autoUpdate": "Auto-update",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
+ "groupTableHeader": "Group",
+ "installContextLabel": "Install Context",
+ "isRemovable": "Install as removable",
+ "licenseTypeLabel": "License type",
+ "modeTableHeader": "Group mode",
+ "policySet": "Policy Set",
+ "preventAutoAppUpdate": "Prevent automatic app updates",
+ "preventManagedAppBackup": "Prevent iCloud app backup",
+ "restartGracePeriodHeader": "Restart grace period",
+ "startTimeColumnLabel": "Availability",
+ "tracks": "Tracks",
+ "uninstallOnRemoval": "Uninstall on device removal",
+ "updateMode": "Update Priority",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD web app",
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office Suite",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeAddIn": "Office add-in",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "sharePointApp": "SharePoint app",
+ "teamsApp": "Teams app",
+ "webApp": "Web link",
+ "win32CatalogApp": "Windows catalog app (Win32)",
+ "winGetPublicApp": "Windows Package Manager Community Repository",
+ "winGetStoreApp": "Microsoft Store app (new)",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "AssignmentToast": {
+ "hideAll": "Hide all toast notifications",
+ "showAll": "Show all toast notifications",
+ "showReboot": "Show toast notifications for computer restarts"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Yes",
+ "notConfigured": "No"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "App install may force a device restart",
+ "basedOnReturnCode": "Determine behavior based on return codes",
+ "force": "Intune will force a mandatory device restart",
+ "suppress": "No specific action"
+ },
+ "FilterType": {
+ "exclude": "Exclude",
+ "include": "Include",
+ "none": "None"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "notApplicable": "Not applicable",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "SettingType": {
+ "assignmentType": "Assignment type",
+ "deviceLicensing": "License type",
+ "installContext": "Uninstall on device removal",
+ "toastSettings": "End user notifications",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Default",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Failed",
+ "hardReboot": "Hard reboot",
+ "retry": "Retry",
+ "softReboot": "Soft reboot",
+ "success": "Success"
+ },
+ "Columns": {
+ "codeType": "Code type",
+ "returnCode": "Return code"
+ },
+ "bladeTitle": "Return codes",
+ "gridAriaLabel": "Return codes",
+ "header": "Specify return codes to indicate post-installation behavior:",
+ "onAddAnnounceMessage": "Return code added item {0} of {1}",
+ "onDeleteSuccess": "Return code {0} deleted successfully",
+ "returnCodeAlreadyUsedValidation": "Return code is already used.",
+ "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
+ "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
+ "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
+ "selectorLabel": "Return codes"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone and iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Add network boundary",
+ "addNetworkBoundaryButton": "Add network boundary...",
+ "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
+ "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
+ "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
+ "boundaryType": "Boundary type",
+ "cloudResources": "Cloud resources",
+ "corporateIdentity": "Corporate identity",
+ "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
+ "editNetworkBoundary": "Edit network boundary",
+ "enrollmentState": "Enrollment state",
+ "iPv4Ranges": "IPv4 ranges",
+ "iPv6Ranges": "IPv6 ranges",
+ "internalProxyServers": "Internal proxy servers",
+ "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
+ "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
+ "mdmDiscoveryUrl": "MDM discovery URL",
+ "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
+ "minimumPinLength": "Set the minimum number of characters required for the PIN",
+ "name": "Name",
+ "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
+ "networkBoundary": "Network boundary",
+ "networkDomainNames": "Network domains",
+ "neutralResources": "Neutral resources",
+ "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
+ "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
+ "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
+ "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
+ "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
+ "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
+ "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
+ "protectedDomainNames": "Protected domains",
+ "proxyServers": "Proxy servers",
+ "requireAppPin": "Disable app PIN when device PIN is managed",
+ "requiredSettings": "Required settings",
+ "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
+ "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
+ "revokeOnUnenroll": "Revoke encryption keys on unenroll",
+ "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
+ "showWipIcon": "Show the enterprise data protection icon",
+ "type": "Type",
+ "useRmsForWip": "Use Azure RMS for WIP",
+ "value": "Value",
+ "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
+ "wipProtectionMode": "Windows Information Protection mode",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabic",
+ "bulgarian": "Bulgarian",
+ "chineseSimplified": "Chinese (Simplified)",
+ "chineseTraditional": "Chinese (Traditional)",
+ "croatian": "Croatian",
+ "czech": "Czech",
+ "danish": "Danish",
+ "dutch": "Dutch",
+ "englishUK": "English (United Kingdom)",
+ "englishUS": "English (United States)",
+ "estonian": "Estonian",
+ "finnish": "Finnish",
+ "frenchCanada": "French (Canada)",
+ "frenchFrance": "French (France)",
+ "german": "German",
+ "greek": "Greek",
+ "hebrew": "Hebrew",
+ "hungarian": "Hungarian",
+ "italian": "Italian",
+ "japanese": "Japanese",
+ "korean": "Korean",
+ "latvian": "Latvian",
+ "lithuanian": "Lithuanian",
+ "norwegian": "Norwegian, Bokmål",
+ "polish": "Polish",
+ "portugueseBrazil": "Portuguese (Brazil)",
+ "portuguesePortugal": "Portuguese (Portugal)",
+ "romanian": "Romanian",
+ "russian": "Russian",
+ "serbian": "Serbian",
+ "slovak": "Slovak",
+ "slovenian": "Slovenian",
+ "spanishMexico": "Spanish (Mexico)",
+ "spanishSpain": "Spanish (Spain)",
+ "swedish": "Swedish",
+ "thai": "Thailand",
+ "turkish": "Turkish",
+ "ukrainian": "Ukrainian"
+ },
+ "Summary": {
+ "placeholder": "Select a notification message from the left to preview contents."
+ },
+ "companyContact": "Show contact information",
+ "companyLogo": "Show company logo",
+ "companyName": "Show company name",
+ "createEditDescription": "Create or edit notification message templates.",
+ "createMessage": "Create message",
+ "deviceDetails": "Show device details",
+ "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
+ "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
+ "editMessage": "Edit message",
+ "email": "email",
+ "emailFooterTitle": "Email Footer",
+ "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
+ "emailHeaderTitle": "Email Header",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Configure Customization settings",
+ "formSubTitle": "Create or modify notification emails",
+ "headerFooterSettingsTab": "Header and footer settings",
+ "imgPreview": "Image Preview",
+ "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
+ "iwLink": "Show company portal website link",
+ "listEmpty": "No message templates.",
+ "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "listSubTitle": "List of notification message templates",
+ "listTitle": "Notification message templates",
+ "localizedNotificationMessageTemplates": "Localized notification message templates",
+ "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
+ "messageCapitalized": "Notification message template",
+ "messageLowercase": "notification message template",
+ "missingDefaultError": "Select a default template",
+ "notificationMessageTemplates": "Notification message templates",
+ "rowValidationError": "At least one message template is required",
+ "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "tenantValueText": "Tenant Value",
+ "testEmailLabel": "Send preview email",
+ "localeLabel": "Locale",
+ "isDefaultLocale": "Is Default"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Configure devices for initial provisioning.",
+ "title": "Device preparation"
+ },
+ "EnrollmentSettings": {
+ "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
+ "title": "Enrollment settings"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
+ "menuTitle": "Windows operating system recovery configuration"
+ },
+ "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
+ "coManagementAuthorityTitle": "Co-management Settings ",
+ "deploymentProfiles": "Windows Autopilot deployment profiles",
+ "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
+ "descriptionLabel": "Windows enrollment methods",
+ "enrollmentStatusPage": "Enrollment Status Page"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Select the number of bits contained in the key.",
+ "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
+ "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
+ "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
+ "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Subject alternative name",
+ "subjectNameFormat": "Subject name format",
+ "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
+ },
+ "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
+ "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
+ "configurationSettingsFormat": "Configuration settings format text",
+ "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
+ "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
+ "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
+ "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Select runtime permissions for the associated app.",
+ "policyAssociatedApp": "Select the app that this policy will be associated with.",
+ "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
+ "policyDescription": "Optionally, enter a description for this configuration policy.",
+ "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
+ "policyName": "Enter a name for this configuration policy.",
+ "policyPlatform": "Select the platform this app configuration policy will apply to.",
+ "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
+ "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
+ "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
+ "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
+ "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
+ "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
+ "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
+ "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
+ "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
+ "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
+ "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
+ "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "header": "Are you sure you want to delete this restriction?"
+ },
+ "DeviceLimit": {
+ "description": "Specify the maximum number of devices a user can enroll.",
+ "header": "Device limit restrictions",
+ "info": "Define how many devices each user can enroll."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Must be 1.0 or greater.",
+ "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
+ "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
+ "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
+ "min": "Minimum cannot be lower than {0}",
+ "minMax": "Minimum version cannot be greater than maximum version.",
+ "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
+ "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
+ },
+ "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
+ "blockManufacturerPlaceHolder": "Manufacturer name",
+ "blockManufacturersHeader": "Blocked manufacturers",
+ "cannotRestrict": "Restriction not supported",
+ "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
+ "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
+ "configurations": "Configure platforms",
+ "deviceManufacturer": "Device manufacturer",
+ "header": "Device type restrictions",
+ "info": "Define which platforms, versions, and management types can enroll.",
+ "manufacturer": "Manufacturer",
+ "max": "Max",
+ "maxVersion": "Maximum version",
+ "min": "Min",
+ "minVersion": "Minimum version",
+ "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
+ "personal": "Personally owned",
+ "platform": "Platform",
+ "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
+ "platformSettings": "Platform settings",
+ "platforms": "Select platforms",
+ "platformsSelected": "{0} platforms selected",
+ "type": "Type",
+ "versions": "versions",
+ "versionsRange": "Allow min/max range:",
+ "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Restriction Priorities were successfully saved."
+ },
+ "Row": {
+ "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
+ },
+ "Table": {
+ "deployed": "Deployed",
+ "name": "Name",
+ "priority": "Priority"
+ },
+ "Type": {
+ "limit": "Device limit restriction",
+ "type": "Device type restriction"
+ },
+ "allUsers": "All Users",
+ "androidRestrictions": "Android restrictions",
+ "create": "Create restriction",
+ "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
+ "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
+ "deleteTitle": "Are you sure you want to delete {0} restriction?",
+ "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
+ "edit": "Edit restriction",
+ "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
+ "iosRestrictions": "iOS restrictions",
+ "mDM": "MDM",
+ "macRestrictions": "macOS restrictions",
+ "maxVersion": "Max Version",
+ "minVersion": "Min Version",
+ "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
+ "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
+ "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
+ "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
+ "notFound": "Restriction not found. It may have already been deleted.",
+ "personallyOwned": "Personally owned devices",
+ "restriction": "Restriction",
+ "restrictionLowerCase": "restriction",
+ "restrictionType": "Restriction type",
+ "selectType": "Select restriction type",
+ "selectValidation": "Please select a platform",
+ "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
+ "typeRequired": "Restriction type is required.",
+ "winPhoneRestrictions": "Windows Phone restrictions",
+ "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
+ "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
+ "windowsRestrictions": "Windows restrictions",
+ "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 day",
+ "twoDays": "2 days",
+ "zeroDays": "0 days"
+ },
+ "SecurityTemplate": {
+ "aSR": "Attack surface reduction",
+ "accountProtection": "Account protection",
+ "allDevices": "All devices",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Antivirus Reporting (Preview)",
+ "conditionalAccess": "Conditional access",
+ "deviceCompliance": "Device compliance",
+ "diskEncryption": "Disk encryption",
+ "eDR": "Endpoint detection and response",
+ "ePM": "Endpoint Privilege Management",
+ "firewall": "Firewall",
+ "helpSupport": "Help and support",
+ "setup": "Setup",
+ "wdapt": "Microsoft Defender for Endpoint"
+ },
"OutlookAppConfig": {
"DataProtectionConfiguration": {
"header": "Data Protection configuration"
@@ -100,693 +1787,622 @@
"themesEnabledTitle": "Themes Enabled",
"themesEnabledTooltip": "Specify if the user is allowed to use a custom visual theme."
},
- "Languages": {
- "ar-aE": "Arabic (U.A.E.)",
- "ar-bH": "Arabic (Bahrain)",
- "ar-dZ": "Arabic (Algeria)",
- "ar-eG": "Arabic (Egypt)",
- "ar-iQ": "Arabic (Iraq)",
- "ar-jO": "Arabic (Jordan)",
- "ar-kW": "Arabic (Kuwait)",
- "ar-lB": "Arabic (Lebanon)",
- "ar-lY": "Arabic (Libya)",
- "ar-mA": "Arabic (Morocco)",
- "ar-oM": "Arabic (Oman)",
- "ar-qA": "Arabic (Qatar)",
- "ar-sA": "Arabic (Saudi Arabia)",
- "ar-sY": "Arabic (Syria)",
- "ar-tN": "Arabic (Tunisia)",
- "ar-yE": "Arabic (Yemen)",
- "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
- "az-latn": "Azerbaijani (Latin, Azerbaijan)",
- "bn-bD": "Bangla (Bangladesh)",
- "bn-iN": "Bangla (India)",
- "bs-cyrl": "Bosnian (Cyrillic)",
- "bs-latn": "Bosnian (Latin)",
- "zh-cN": "Chinese (PRC)",
- "zh-hK": "Chinese (Hong Kong S.A.R.)",
- "zh-mO": "Chinese (Macao S.A.R.)",
- "zh-sG": "Chinese (Singapore)",
- "zh-tW": "Chinese (Taiwan)",
- "hr-bA": "Croatian (Latin)",
- "hr-hR": "Croatian (Croatia)",
- "nl-bE": "Dutch (Belgium)",
- "nl-nL": "Dutch (Netherlands)",
- "en-aU": "English (Australia)",
- "en-bZ": "English (Belize)",
- "en-cA": "English (Canada)",
- "en-cabn": "English (Caribbean)",
- "en-iE": "English (Ireland)",
- "en-iN": "English (India)",
- "en-jM": "English (Jamaica)",
- "en-mY": "English (Malaysia)",
- "en-nZ": "English (New Zealand)",
- "en-pH": "English (Republic of the Philippines)",
- "en-sG": "English (Singapore)",
- "en-tT": "English (Trinidad and Tobago)",
- "en-uK": "English (United Kingdom)",
- "en-uS": "English (United States)",
- "en-zA": "English (South Africa)",
- "en-zW": "English (Zimbabwe)",
- "fr-bE": "French (Belgium)",
- "fr-cA": "French (Canada)",
- "fr-cH": "French (Switzerland)",
- "fr-fR": "French (France)",
- "fr-lU": "French (Luxembourg)",
- "fr-mC": "French (Monaco)",
- "de-aT": "German (Austria)",
- "de-cH": "German (Switzerland)",
- "de-dE": "German (Germany)",
- "de-lI": "German (Liechtenstein)",
- "de-lU": "German (Luxembourg)",
- "iu-cans": "Inuktitut (Syllabics, Canada)",
- "iu-latn": "Inuktitut (Latin, Canada)",
- "it-cH": "Italian (Switzerland)",
- "it-iT": "Italian (Italy)",
- "ms-bN": "Malay (Brunei Darussalam)",
- "ms-mY": "Malay (Malaysia)",
- "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
- "mn-mN": "Mongolian (Cyrillic, Mongolia)",
- "no-nB": "Norwegian, Bokmål (Norway)",
- "no-nn": "Norwegian, Nynorsk (Norway)",
- "pt-bR": "Portuguese (Brazil)",
- "pt-pT": "Portuguese (Portugal)",
- "quz-bO": "Quechua (Bolivia)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Peru)",
- "smj-nO": "Sami, Lule (Norway)",
- "smj-sE": "Sami, Lule (Sweden)",
- "se-fI": "Sami, Northern (Finland)",
- "se-nO": "Sami, Northern (Norway)",
- "se-sE": "Sami, Northern (Sweden)",
- "sma-nO": "Sami, Southern (Norway)",
- "sma-sE": "Sami, Southern (Sweden)",
- "smn": "Sami, Inari (Finland)",
- "sms": "Sami, Skolt (Finland)",
- "sr-Cyrl-bA": "Serbian (Cyrillic)",
- "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
- "sr-Latn-bA": "Serbian (Latin)",
- "sr-Latn-rS": "Serbian (Latin, Serbia)",
- "dsb": "Lower Sorbian (Germany)",
- "hsb": "Upper Sorbian (Germany)",
- "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
- "es-aR": "Spanish (Argentina)",
- "es-bO": "Spanish (Bolivia)",
- "es-cL": "Spanish (Chile)",
- "es-cO": "Spanish (Colombia)",
- "es-cR": "Spanish (Costa Rica)",
- "es-dO": "Spanish (Dominican Republic)",
- "es-eC": "Spanish (Ecuador)",
- "es-eS": "Spanish (Spain)",
- "es-gT": "Spanish (Guatemala)",
- "es-hN": "Spanish (Honduras)",
- "es-mX": "Spanish (Mexico)",
- "es-nI": "Spanish (Nicaragua)",
- "es-pA": "Spanish (Panama)",
- "es-pE": "Spanish (Peru)",
- "es-pR": "Spanish (Puerto Rico)",
- "es-pY": "Spanish (Paraguay)",
- "es-sV": "Spanish (El Salvador)",
- "es-uS": "Spanish (United States)",
- "es-uY": "Spanish (Uruguay)",
- "es-vE": "Spanish (Venezuela)",
- "sv-fI": "Swedish (Finland)",
- "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
- "uz-latn": "Uzbek (Latin, Uzbekistan)",
- "af": "Afrikaans (South Africa)",
- "sq": "Albanian (Albania)",
- "am": "Amharic (Ethiopia)",
- "hy": "Armenian (Armenia)",
- "as": "Assamese (India)",
- "ba": "Bashkir (Russia)",
- "eu": "Basque (Basque)",
- "be": "Belarusian (Belarus)",
- "br": "Breton (France)",
- "bg": "Bulgarian (Bulgaria)",
- "ca": "Catalan (Catalan)",
- "co": "Corsican (France)",
- "cs": "Czech (Czech Republic)",
- "da": "Danish (Denmark)",
- "dv": "Divehi (Maldives)",
- "et": "Estonian (Estonia)",
- "fo": "Faroese (Faroe Islands)",
- "fil": "Filipino (Philippines)",
- "fi": "Finnish (Finland)",
- "gl": "Galician (Galician)",
- "ka": "Georgian (Georgia)",
- "el": "Greek (Greece)",
- "gu": "Gujarati (India)",
- "ha": "Hausa (Latin, Nigeria)",
- "he": "Hebrew (Israel)",
- "hi": "Hindi (India)",
- "hu": "Hungarian (Hungary)",
- "is": "Icelandic (Iceland)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonesian (Indonesia)",
- "ga": "Irish (Ireland)",
- "xh": "isiXhosa (South Africa)",
- "zu": "isiZulu (South Africa)",
- "ja": "Japanese (Japan)",
- "kn": "Kannada (India)",
- "kk": "Kazakh (Kazakhstan)",
- "km": "Khmer (Cambodia)",
- "rw": "Kinyarwanda (Rwanda)",
- "sw": "Kiswahili (Kenya)",
- "kok": "Konkani (India)",
- "ko": "Korean (Korea)",
- "ky": "Kyrgyz (Kyrgyzstan)",
- "lo": "Lao (Lao P.D.R.)",
- "lv": "Latvian (Latvia)",
- "lt": "Lithuanian (Lithuania)",
- "lb": "Luxembourgish (Luxembourg)",
- "mk": "Macedonian (North Macedonia)",
- "ml": "Malayalam (India)",
- "mt": "Maltese (Malta)",
- "mi": "Maori (New Zealand)",
- "mr": "Marathi (India)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepali (Nepal)",
- "oc": "Occitan (France)",
- "or": "Odia (India)",
- "ps": "Pashto (Afghanistan)",
- "fa": "Persian",
- "pl": "Polish (Poland)",
- "pa": "Punjabi (India)",
- "ro": "Romanian (Romania)",
- "rm": "Romansh (Switzerland)",
- "ru": "Russian (Russia)",
- "sa": "Sanskrit (India)",
- "st": "Sesotho sa Leboa (South Africa)",
- "tn": "Setswana (South Africa)",
- "si": "Sinhala (Sri Lanka)",
- "sk": "Slovak (Slovakia)",
- "sl": "Slovenian (Slovenia)",
- "sv": "Swedish (Sweden)",
- "syr": "Syriac (Syria)",
- "tg": "Tajik (Cyrillic, Tajikistan)",
- "ta": "Tamil (India)",
- "tt": "Tatar (Russia)",
- "te": "Telugu (India)",
- "th": "Thai (Thailand)",
- "bo": "Tibetan (PRC)",
- "tr": "Turkish (Turkey)",
- "tk": "Turkmen (Turkmenistan)",
- "uk": "Ukrainian (Ukraine)",
- "ur": "Urdu (Islamic Republic of Pakistan)",
- "vi": "Vietnamese (Vietnam)",
- "cy": "Welsh (United Kingdom)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (PRC)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender for Endpoint",
- "androidDeviceOwnerApplications": "Applications",
- "androidDeviceOwnerPolicyMessages": "Custom support information",
- "androidForWorkPassword": "Device password",
- "appManagement": "Allow or Block apps",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Restricted Apps",
- "applicationVisibility": "Show or Hide Apps",
- "applications": "App Store",
- "applicationsAndGames": "App Store, Doc Viewing, Gaming",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Apps and experience",
- "associatedDomains": "Associated domains",
- "autonomousSingleAppMode": "Autonomous Single App Mode",
- "azureOperationalInsights": "Azure operational insights",
- "bitLocker": "Windows Encryption",
- "bootOptions": "Boot options",
- "browser": "Browser",
- "builtinApps": "Built-in apps",
- "cameras": "Cameras",
- "cellular": "Cellular",
- "cloudAndStorage": "Cloud and Storage",
- "cloudPrint": "Cloud Printer",
- "complianceEmailProfile": "Email",
- "connectedDevices": "Connected devices",
- "connectivity": "Cellular and connectivity",
- "contentCaching": "Content caching",
- "controlPanelAndSettings": "Control Panel and Settings",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Custom Compliance",
- "customConfiguration": "Custom Configuration Profile",
- "customOMASettings": "Custom OMA-URI Settings",
- "customPreferences": "Preference file",
- "dFCISecuritySettings": "Security settings",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows Firewall",
- "defenderLocalSecurityOptions": "Local device security options",
- "defenderSecurityCenter": "Microsoft Defender Security Center",
- "deliveryOptimization": "Delivery Optimization",
- "derivedCredentialAuthenticationConfiguration": "Derived credential",
- "deviceExperience": "Device experience",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Microsoft Defender Application Control",
- "deviceHealth": "Device Health",
- "devicePassword": "Device password",
- "deviceProperties": "Device Properties",
- "deviceRestrictions": "General",
- "deviceSecurity": "System security",
- "display": "Display",
- "domainJoin": "Domain Join",
- "domains": "Domains",
- "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge kiosk mode",
- "editionUpgrade": "Edition Upgrade",
- "education": "Education",
- "educationDeviceCerts": "Device certificates",
- "educationStudentCerts": "Student certificates",
- "educationTakeATest": "Take a Test",
- "educationTeacherCerts": "Teacher certificates",
- "emailProfile": "Email",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Single sign-on app extension",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Games",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Health monitoring",
- "homeScreenLayout": "Home Screen Layout",
- "iOSWallpaper": "Wallpaper",
- "importedPFX": "PKCS Imported Certificate",
- "iosDefenderAtp": "Microsoft Defender for Endpoint",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Kernel extensions",
- "keyboardAndDictionary": "Keyboard and dictionary",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Dedicated devices",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Kiosk web browser",
- "lockScreenMessage": "Lock Screen Message",
- "lockedScreenExperience": "Locked Screen Experience",
- "logging": "Reporting and Telemetry",
- "loginItems": "Login items",
- "loginWindow": "Login window",
- "macDefenderAtp": "Microsoft Defender for Endpoint",
- "maintenance": "Maintenance",
- "malware": "Malware",
- "messaging": "Messaging",
- "microphonesAndSpeakers": "Microphones and speakers",
- "networkBoundary": "Network boundary",
- "networkProxy": "Network proxy",
- "notifications": "App Notifications",
- "pKCS": "PKCS Certificate",
- "password": "Password",
- "personalProfile": "Personal profile",
- "personalization": "Personalization",
- "policyOverride": "Override Group Policy",
- "ports": "Ports",
- "powerSettings": "Power Settings",
- "printer": "Printer",
- "privacy": "Privacy",
- "privacyPerApp": "Per-app privacy exceptions",
- "privacyPreferences": "Privacy preferences",
- "projection": "Projection",
- "radios": "Radios",
- "sCCMCompliance": "Configuration Manager Compliance",
- "sCEP": "SCEP Certificate",
- "sCEPProperties": "SCEP Certificate",
- "sMode": "Mode switch (Windows Insider only)",
- "safari": "Safari",
- "search": "Search",
- "session": "Session",
- "sharedDevice": "Shared iPad",
- "sharedPCAccountManager": "Shared multi-user device",
- "singleSignOn": "Single sign-on",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Settings",
- "start": "Start",
- "systemExtensions": "System extensions",
- "systemSecurity": "System Security",
- "trustedCert": "Trusted Certificate",
- "uEFIAccess": "UEFI access",
- "updates": "Updates",
- "userRights": "User Rights",
- "usersAndAccounts": "Users and Accounts",
- "vPN": "Base VPN",
- "vPNApps": "Automatic VPN",
- "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
- "vPNConditionalAccess": "Conditional Access",
- "vPNConnectivity": "Connectivity",
- "vPNDNSTriggers": "DNS Settings",
- "vPNIKEv2": "IKEv2 settings",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Split Tunneling",
- "vPNTrustedNetwork": "Trusted Network Detection",
- "wakeSettings": "Wake settings",
- "webContentFilter": "Web Content Filter",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender for Endpoint",
- "windowsDefenderATP": "Microsoft Defender for Endpoint",
- "windowsHelloForBusiness": "Windows Hello for Business",
- "windowsSpotlight": "Windows Spotlight",
- "wiredNetwork": "Wired network",
- "wireless": "Wireless",
- "wirelessProjection": "Wireless projection",
- "workProfile": "Work profile settings",
- "workProfilePassword": "Work profile password",
- "xboxServices": "Xbox services",
- "zebraMx": "MX profile (Zebra only)",
- "complianceActionsLabel": "Actions for noncompliance"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Description"
- },
- "FeatureDeploymentSettings": {
- "header": "Feature deployment settings"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "This feature cannot downgrade a device.",
- "label": "Feature update to deploy"
- },
- "GradualRolloutEndDate": {
- "label": "Final group availability"
- },
- "GradualRolloutInterval": {
- "label": "Days between groups"
- },
- "GradualRolloutStartDate": {
- "label": "First group availability"
- },
- "Name": {
- "label": "Name"
- },
- "OptionalUpdate": {
- "label": "Required or optional update"
- },
- "RolloutOptions": {
- "label": "Rollout options"
- },
- "RolloutSettings": {
- "header": "When would you like to make the update available in Windows Update?"
- },
- "ScopeSettings": {
- "header": "Configure scope tags for this policy."
- },
- "StartDateOnlyStartDate": {
- "label": "First available date"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Disabled",
- "enabled": "Enabled",
- "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
- "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
- "notApplicable": "Not Applicable",
- "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
- },
- "bladeTitle": "Feature update deployments",
- "deploymentSettingsTitle": "Deployment settings",
- "loadError": "Loading failed!",
- "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
- },
- "Notifications": {
- "deploymentSaved": "\"{0}\" has been saved.",
- "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
- },
- "TabName": {
- "deploymentSettings": "Deployment settings",
- "groupAssignmentSettings": "Assignments",
- "scopeSettings": "Scope tags"
- },
- "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
- "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
- "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
- "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
- "profileNameWarning": "Name should be less than 64 characters",
- "specificLicensingRequired": "Some selected capabilities require specific licensing."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Allow the use of lowercase letters in PIN",
- "notAllow": "Do not allow the use of lowercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Allow the use of special characters in PIN",
- "notAllow": "Do not allow the use of special characters in PIN",
- "requireAtLeastOne": "Require the use of at least one special character in PIN"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Allow the use of uppercase letters in PIN",
- "notAllow": "Do not allow the use of uppercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
- }
- },
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "App Version",
- "dependencyName": "Dependency name",
- "lastModifiedTime": "Last modified time",
- "relationship": "Relationship",
- "replaced": "Replaced",
- "searchPlaceholder": "Filter by app name",
- "status": "Status details",
- "statusDetails": "Status",
- "supersedenceName": "Supersedence name"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Child dependency",
- "indirectSupersedence": "Not directly related",
- "supersedenceAncestors": "Superseding",
- "supersedenceDescendants": "Superseded"
- },
- "SupersededReplaced": {
- "no": "No",
- "yes": "Yes"
- },
- "Tabs": {
- "chart": "Chart",
- "dependency": "Dependency",
- "label": "View: ",
- "supersedence": "Supersedence",
- "table": "Table"
- },
- "dependencyGraphAriaLabel": "App dependency chart",
- "supersedenceGraphAriaLabel": "App supersedence chart"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Please select a discovery script",
- "scriptFileLabel": "Select your discovery script"
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
+ "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
+ "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
+ "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
+ "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
+ "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
+ "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
+ "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
+ "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
+ "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
+ "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
+ "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
+ "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
+ "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
+ "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
+ "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
+ "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
+ "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
+ "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
+ "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
+ "apps": "apps",
+ "appsListName": "Application list",
+ "blockingApps": "Blocking apps",
+ "managedApps": "Managed apps",
+ "noApps": "No applications",
+ "noAppsError": "Error retrieving applications",
+ "selectApps": "Select apps",
+ "selectedAppsCount": "{0} apps selected (100 max)",
+ "useSelectedAppsAll": "All",
+ "useSelectedAppsSelected": "Selected",
+ "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
},
- "PremiumBanner": {
- "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
- "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Script",
- "placeholder": "Click to select",
- "searchboxPlaceholder": "Search by script name",
- "title": "Select a discovery script"
+ "Header": {
+ "application": "Application",
+ "publisher": "Publisher",
+ "version": "Version"
},
- "SummaryGrid": {
- "ariaLabel": "Custom compliance rules summary"
+ "SearchBox": {
+ "ariaLabel": "Search apps",
+ "placeHolder": "Search by name or publisher"
+ },
+ "allowToUseToggle": "Allow users to use device if installation error occurs",
+ "blockToggle": "Block device use until all apps and profiles are installed",
+ "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
+ "collectLogToggle": "Turn on log collection and diagnostics page for end users",
+ "create": "Create Profile",
+ "customMessageTextBox": "Error message",
+ "customMessageToggle": "Show custom message when time limit or error occurs",
+ "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
+ "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
+ "progressToggle": "Show app and profile configuration progress",
+ "resetToggle": "Allow users to reset device if installation error occurs",
+ "timeout": "Show an error when installation takes longer than specified number of minutes"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Property",
+ "rule": "Rule",
+ "ruleDetails": "Rule Details",
+ "value": "Value"
},
- "UploadFile": {
- "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
- "noFileSelectedError": "Please select a json file",
- "parseFileSelectedError": "The json file is invalid"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filter",
- "noFilters": "None"
- },
- "Platform": {
- "all": "All",
- "android": "Android device administrator",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android enterprise",
- "common": "Common",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS and Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "windows": "Windows",
- "windows10": "Windows 10 and later",
- "windows10CM": "Windows 10 and later (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 and later",
- "windows8And10": "Windows 8 and 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 and later",
- "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows PC"
- },
- "AppInformationTab": {
- "Info": {
- "AppStoreUrl": {
- "android": "Enter the link to the app listing in Google Play store. For example:",
- "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
- "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
- "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
- "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
- "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
- "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ "assignIf": "Assign profile if",
+ "deleteWarning": "This will delete the selected Applicability Rule",
+ "dontAssignIf": "Don't assign profile if",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "and {0} more",
+ "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
+ "maxText": "Max",
+ "minText": "Min",
+ "noActionRow": "No Applicability Rules Specified",
+ "oSVersion": "e.g. 1.2.3.4",
+ "toText": "to",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "OS edition",
+ "windows10OsVersion": "OS version",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Allow user to change setting",
+ "tooltip": "Specify if the user is allowed to change the setting."
+ },
+ "AllowWorkAccounts": {
+ "title": "Allow only work or school accounts",
+ "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
},
- "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
- "applicableDeviceType": "Select the device types that can install this app.",
- "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
- "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
- "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
- "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
- "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
- "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
- "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
- "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
- "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
- "learnMore": "Learn more",
- "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
- "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
- "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
- "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
- "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
- "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
- "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
- "packageId": "The app Package Identifier is the unique value that identifies the app.",
- "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
- "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
- "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
- "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
- "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
- "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
- "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
- "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
- "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
- "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
- },
- "descriptionPreview": "Preview",
- "descriptionRequired": "Description is required.",
- "editDescription": "Edit Description",
- "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
- "name": "App information",
- "nameForOfficeSuitApp": "App suite information"
- },
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ "BlockExternalImages": {
+ "title": "Block external images",
+ "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
+ },
+ "ConfigureEmail": {
+ "title": "Configure email account settings"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
+ "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
+ },
+ "title": "Default app signature"
+ },
+ "OfficeFeedReplies": {
+ "title": "Discover Feed",
+ "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
+ },
+ "OrganizeMailByThread": {
+ "title": "Organize mail by thread",
+ "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
+ },
+ "PlayMyEmails": {
+ "title": "Play My Emails",
+ "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
+ },
+ "SuggestedReplies": {
+ "title": "Suggested replies",
+ "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
+ },
+ "SyncCalendars": {
+ "title": "Sync Calendars",
+ "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
+ },
+ "TextPredictions": {
+ "title": "Text Predictions",
+ "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
},
- "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
- "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
- "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
- "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
- "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
- "appSharingToLevel3": "{0}: Allow sending org data to any app",
- "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
- "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
- "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
- "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
- "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
- "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
- "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
- "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
- "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
- "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
- "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
- "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
- "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
- "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
- "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
- "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
- "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
- "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
- "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
- "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
- "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
- "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
- "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
- "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
- "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
- "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
- "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
- "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
- "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ "ThemesEnabled": {
+ "title": "Themes enabled",
+ "tooltip": "Specify if the user is allowed to use a custom visual theme."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS devices"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Admin contacts",
+ "appPackaging": "App packaging",
+ "autopatchGroups": "Autopatch groups",
+ "devices": "Devices",
+ "featureEnablement": "Feature activate",
+ "feedback": "Feedback",
+ "gettingStarted": "Getting started",
+ "messages": "Messages",
+ "onlineResources": "Online resources",
+ "policyHealth": "Policy health",
+ "policyHealthPreview": "Policy health (preview)",
+ "releaseManagement": "Release management",
+ "serviceRequests": "Service requests",
+ "settings": "Settings",
+ "supportRequests": "Support requests",
+ "tenantEnrollment": "Tenant enrollment",
+ "tenantManagement": "Tenant management"
+ },
+ "actions": "Actions for Non-Compliance",
+ "advancedExchangeSettings": "Exchange online settings",
+ "advancedThreatProtection": "Microsoft Defender for Endpoint",
+ "allApps": "All apps",
+ "allDevices": "All devices",
+ "androidFotaDeployments": "Android FOTA deployments",
+ "appBundles": "App Bundles",
+ "appCategories": "App categories",
+ "appConfigPolicies": "App configuration policies",
+ "appConfigurationStatus": "App Configuration Status",
+ "appInstallStatus": "App install status",
+ "appLicences": "App licenses",
+ "appProtectionPolicies": "App protection policies",
+ "appProtectionStatus": "App Protection status",
+ "appSelectiveWipe": "App selective wipe",
+ "appleVppTokens": "Apple VPP Tokens",
+ "apps": "Apps",
+ "assign": "Assignments",
+ "assignedPermissions": "Assigned permissions",
+ "assignedRoles": "Assigned roles",
+ "autopilotDeploymentReport": "Autopilot deployments (preview)",
+ "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
+ "brandingAndCustomization": "Customization",
+ "cartProfiles": "Cart profiles",
+ "certificateConnectors": "Certificate connectors",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Cloud attached devices (preview)",
+ "cloudPcActions": "Cloud PC actions (preview)",
+ "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
+ "compliancePolicies": "Compliance policies",
+ "complianceScriptManagement": "Scripts",
+ "complianceScriptManagementPreview": "Scripts (preview)",
+ "complianceSettings": "Compliance policy settings",
+ "conditionStatements": "Condition statements",
+ "conditions": "Locations",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Configuration profiles",
+ "configurationScripts": "Configuration Scripts",
+ "connectorsAndTokens": "Connectors and tokens",
+ "corporateDeviceIdentifiers": "Corporate device identifiers",
+ "customAttributes": "Custom attributes",
+ "customAttributesMacOS": "Custom attributes for macOS",
+ "customNotifications": "Custom notifications",
+ "deploymentSettings": "Deployment settings",
+ "derivedCredentials": "Derived Credentials",
+ "deviceActions": "Device actions",
+ "deviceCategories": "Device categories",
+ "deviceCleanUp": "Device clean-up rules",
+ "deviceEnrollmentManagers": "Device enrollment managers",
+ "deviceExecutionStatus": "Device status",
+ "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
+ "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
+ "devices": "Devices",
+ "discoveredApps": "Discovered apps",
+ "edgePolicies": "Policies for Microsoft Edge",
+ "embeddedSIM": "eSIM cellular profiles (preview)",
+ "enrollDevices": "Enroll devices",
+ "enrollmentFailures": "Enrollment failures",
+ "enrollmentNotifications": "Enrollment notifications (preview)",
+ "enrollmentRestrictions": "Enrollment restrictions",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange service connectors",
+ "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
+ "failuresForDriverUpdates": "Windows Driver update failures",
+ "failuresForFeatureUpdates": "Feature update failures",
+ "failuresForQualityUpdates": "Windows Expedited update failures",
+ "featureFlighting": "Feature flighting",
+ "featureUpdateDeployments": "Feature updates for Windows 10 and later",
+ "flighting": "Flighting",
+ "fotaUpdate": "Firmware over-the-air update",
+ "groupPolicy": "Administrative Templates",
+ "groupPolicyAnalytics": "Group policy analytics",
+ "helpSupport": "Help and support",
+ "helpSupportReplacement": "Help and support ({0})",
+ "iOSAppProvisioning": "iOS app provisioning profiles",
+ "incompleteUserEnrollments": "Incomplete user enrollments",
+ "iosUpdates": "iOS/iPadOS updates",
+ "legacyPcManagement": "Legacy PC management",
+ "macOSSoftwareUpdate": "macOS updates",
+ "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
+ "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
+ "macOSSoftwareUpdateStateSummaries": "updates",
+ "managedGooglePlay": "Managed Google Play",
+ "msfb": "Microsoft Store for Business",
+ "myPermissions": "My permissions",
+ "notifications": "Notifications",
+ "officeApps": "Office apps",
+ "officeProPlusPolicies": "Policies for Office apps",
+ "onPremise": "On Premise",
+ "onPremisesConnector": "Exchange ActiveSync on-premises connector",
+ "onPremisesDeviceAccess": "Exchange ActiveSync devices",
+ "onPremisesManageAccess": "Exchange on-premises access",
+ "outOfDateIosDevices": "Installation failures for iOS devices",
+ "overview": "Overview",
+ "partnerDeviceManagement": "Partner device management",
+ "perUpdateRingDeploymentState": "Per update ring deployment state",
+ "permissions": "Permissions",
+ "platformApps": "{0} apps",
+ "platformDevices": "{0} devices",
+ "platformEnrollment": "{0} enrollment",
+ "policies": "Policies",
+ "profiles": "Profiles",
+ "properties": "Properties",
+ "reports": "Reports",
+ "retireNoncompliantDevices": "Retire noncompliant devices",
+ "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
+ "role": "Role",
+ "scriptManagement": "Scripts",
+ "securityBaselines": "Security baselines",
+ "serviceToServiceConnector": "Exchange online connector",
+ "servicenowConnector": "ServiceNow connector",
+ "shellScripts": "Shell scripts",
+ "teamViewerConnector": "TeamViewer connector",
+ "telecomeExpenseManagement": "Telecom expense management",
+ "tenantAdmin": "Tenant admin",
+ "tenantAdministration": "Tenant administration",
+ "termsAndConditions": "Terms and conditions",
+ "titles": "Titles",
+ "troubleshoot": "Troubleshoot",
+ "troubleshootSupport": "Troubleshooting + support",
+ "user": "User",
+ "userExecutionStatus": "User status",
+ "wdacSupplementalPolicies": "S mode supplemental policies",
+ "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
+ "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
+ "win32CatalogUpdateAppPreviewTitle": "Enterprise App Catalog apps with updates (preview)",
+ "win32CatalogUpdateAppTitle": "Enterprise App Catalog apps with updates",
+ "windows10DriverUpdate": "Driver updates for Windows 10 and later",
+ "windows10QualityUpdate": "Quality updates for Windows 10 and later",
+ "windows10UpdateRings": "Update rings for Windows 10 and later",
+ "windows10XPolicyFailures": "Windows 10X policy failures",
+ "windows365PartnerConnector": "Windows 365 partner connectors",
+ "windowsDiagnosticData": "Windows data",
+ "windowsEnterpriseCertificate": "Windows enterprise certificate",
+ "windowsManagement": "Scripts",
+ "windowsSideLoadingKeys": "Windows side loading keys",
+ "windowsSymantecCertificate": "Windows DigiCert certificate",
+ "windowsThreatReport": "Threat agent status"
+ },
+ "TAPSettings": {
+ "AllowedDataIngestionLocations": {
+ "label": "Allow users to open data from selected services",
+ "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
+ },
+ "AndroidBackup": {
+ "label": "Backup org data to Android backup services",
+ "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ },
+ "AndroidBiometricAuthentication": {
+ "label": "Biometrics instead of PIN for access",
+ "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
+ },
+ "AndroidFingerprint": {
+ "label": "Fingerprint instead of PIN for access (Android 6.0+)",
+ "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
+ },
+ "AndroidOverrideFingerprint": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "AppPIN": {
+ "label": "App PIN when device PIN is set",
+ "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
+ },
+ "BlockDataIngestionIntoOrganizationDocuments": {
+ "label": "Open data into Org documents",
+ "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
+ "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
+ "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
+ "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
+ },
+ "ConnectToVpnOnLaunch": {
+ "label": "Start Microsoft Tunnel connection on app-launch",
+ "tooltip": "Allow connection to VPN when app is launch"
+ },
+ "CredentialsForAccess": {
+ "label": "Work or school account credentials for access",
+ "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
+ },
+ "CustomBrowserDisplayName": {
+ "label": "Unmanaged Browser Name",
+ "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
+ },
+ "CustomBrowserPackageId": {
+ "label": "Unmanaged Browser ID",
+ "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
+ },
+ "CustomBrowserProtocol": {
+ "label": "Unmanaged browser protocol",
+ "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
+ },
+ "DialerRestrictionLevel": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
+ "label": "Transfer telecommunication data to",
+ "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "EncryptData": {
+ "label": "Encrypt org data",
+ "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
},
- "Tap": {
- "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
- "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
- "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
- "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
- "checkInput": "Check input for validity",
- "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
- "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
- "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
- "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
- "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
- "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
- "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
- "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
- "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
- "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
- "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
- "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
- "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
- "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
- "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
- "name": "The name of this network boundary",
- "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
- "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
- "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
- "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
- "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
- "protectUnderLock": "Protects app content while the device is in a locked state.",
- "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
- "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
- "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
- "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
- "required": "Required",
- "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
- "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
- "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
- "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
- "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ "EncryptDataAndroid": {
+ "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
+ },
+ "EncryptDataIos": {
+ "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 256-bit AES encryption to app data.",
+ "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
+ "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
},
- "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
- },
+ "EncryptDataOnEnrolledDevices": {
+ "label": "Encrypt org data on enrolled devices",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
+ },
+ "IOSBackup": {
+ "label": "Backup org data to iTunes and iCloud backups",
+ "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
+ },
+ "IOSFaceID": {
+ "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
+ "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
+ },
+ "IOSOverrideTouchId": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "IOSTouchId": {
+ "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
+ "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
+ },
+ "MessagingRedirectAppDisplayName": {
+ "label": "Messaging App Name"
+ },
+ "MessagingRedirectAppPackageId": {
+ "label": "Messaging App Package ID"
+ },
+ "MessagingRedirectAppUrlScheme": {
+ "label": "Messaging App URL Scheme"
+ },
+ "NotificationRestriction": {
+ "label": "Org data notifications",
+ "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
+ },
+ "OpenLinksManagedBrowser": {
+ "label": "Restrict web content transfer with other apps",
+ "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
+ },
+ "OverrideBiometric": {
+ "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
+ },
+ "PinAccess": {
+ "label": "PIN for access",
+ "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
+ },
+ "PinLength": {
+ "label": "Select minimum PIN length",
+ "tooltip": "This setting specifies the minimum number of digits of a PIN."
+ },
+ "PinType": {
+ "label": "PIN type",
+ "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
+ },
+ "Printing": {
+ "label": "Printing org data",
+ "tooltip": "If blocked, the app cannot print protected data."
+ },
+ "ProtectedMessagingRedirectAppType": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
+ "label": "Transfer messaging data to",
+ "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "ReceiveData": {
+ "label": "Receive data from other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ },
+ "RecheckAccessAfter": {
+ "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
+ "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
+ },
+ "RequireClass3Biometrics": {
+ "label": "Class 3 Biometrics (Android 9.0+)",
+ "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
+ },
+ "RequirePinAfterBiometricChange": {
+ "label": "Override Biometrics with PIN after biometric updates",
+ "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
+ },
+ "RestrictKeyboards": {
+ "duplicatePackageError": "The package ID must be unique.",
+ "invalidPackageError": "Invalid package ID",
+ "label": "Approved keyboards",
+ "select": "Select keyboards to approve",
+ "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
+ "title": "Add approved keyboards",
+ "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
+ },
+ "SaveData": {
+ "label": "Save copies of org data",
+ "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
+ },
+ "SaveDataToSelected": {
+ "label": "Allow user to save copies to selected services",
+ "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
+ },
+ "ScreenCaptureAndAndroidAssistant": {
+ "label": "Screen capture and Google Assistant\n",
+ "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
+ },
+ "SendData": {
+ "label": "Send org data to other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
+ },
+ "SimplePin": {
+ "label": "Simple PIN",
+ "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
+ },
+ "SyncContacts": {
+ "label": "Sync policy managed app data with native apps or add-ins"
+ },
+ "ThirdPartyKeyboards": {
+ "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
+ "label": "Third party keyboards"
+ },
+ "Timeout": {
+ "label": "Timeout (minutes of inactivity)"
+ },
+ "WinCutCopyPaste": {
+ "label": "Allow cut, copy, and paste for",
+ "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
+ },
+ "WinPrintData": {
+ "label": "Print org data",
+ "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
+ },
+ "WinReceiveData": {
+ "label": "Receive data from",
+ "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
+ },
+ "WinSendData": {
+ "label": "Send org data to",
+ "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
+ },
+ "Tap": {
+ "numberOfDays": "Number of days",
+ "pinResetAfterNumberOfDays": "PIN reset after number of days",
+ "previousPinBlockCount": "Select number of previous PIN values to maintain"
+ }
+ },
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Make available to users as an optional update",
+ "optionalValue": "Optional",
+ "required": "Make available to users as a required update",
+ "requiredValue": "Required"
+ },
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "webApp": "Web link",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "PolicySet": {
+ "appManagement": "Application management",
+ "assignments": "Assignments",
+ "basics": "Basics",
+ "deviceEnrollment": "Device enrollment",
+ "deviceManagement": "Device management",
+ "scopeTags": "Scope tags",
+ "appConfigurationTitle": "App configuration policies",
+ "appProtectionTitle": "App protection policies",
+ "appTitle": "Apps",
+ "iOSAppProvisioningTitle": "iOS app provisioning profiles",
+ "deviceLimitRestrictionTitle": "Device limit restrictions",
+ "deviceTypeRestrictionTitle": "Device type restrictions",
+ "enrollmentStatusSettingTitle": "Enrollment status pages",
+ "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
+ "deviceComplianceTitle": "Device compliance policies",
+ "deviceConfigurationTitle": "Device configuration profiles",
+ "powershellScriptTitle": "Powershell scripts"
+ },
"Win32Program": {
"DeviceRestartBehaviorOptions": {
"allow": "App install may force a device restart",
@@ -819,6 +2435,233 @@
"uninstallCommand": "Uninstall command",
"uninstallCommandTooltip": "The complete uninstallation command line used to uninstall this app."
},
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
+ },
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Allow the use of lowercase letters in PIN",
+ "notAllow": "Do not allow the use of lowercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Allow the use of special characters in PIN",
+ "notAllow": "Do not allow the use of special characters in PIN",
+ "requireAtLeastOne": "Require the use of at least one special character in PIN"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Allow the use of uppercase letters in PIN",
+ "notAllow": "Do not allow the use of uppercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
+ }
+ },
"Autopilot": {
"AssignResourceAccount": {
"createNewCommandMenu": "Create new",
@@ -1031,268 +2874,1051 @@
"windowsPCCommandMenu": "Windows PC",
"directoryServiceLabel": "Join to Microsoft Entra ID as"
},
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Admin Groups",
- "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
- "rolesMenuTitle": "Endpoint Manager roles",
- "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
- "RoleAssignmentScope": "Scope Groups"
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Managed devices",
+ "devicesWithoutEnrollment": "Managed apps"
},
- "MinimumOperatingSystem": {
- "Android": {
- "v10": "Android 10.0",
- "v11": "Android 11.0",
- "v4": "Android 4.0 (Ice Cream Sandwich)",
- "v403": "Android 4.0.3 (Ice Cream Sandwich)",
- "v41": "Android 4.1 (Jelly Bean)",
- "v42": "Android 4.2 (Jelly Bean)",
- "v43": "Android 4.3 (Jelly Bean)",
- "v44": "Android 4.4 (KitKat)",
- "v5": "Android 5.0 (Lollipop)",
- "v51": "Android 5.1 (Lollipop)",
- "v6": "Android 6.0 (Marshmallow)",
- "v7": "Android 7.0 (Nougat)",
- "v71": "Android 7.1 (Nougat)",
- "v8": "Android 8.0 (Oreo)",
- "v81": "Android 8.1 (Oreo)",
- "v9": "Android 9.0 (Pie)"
- },
- "IOS": {
- "v10": "iOS 10.0",
- "v11": "iOS 11.0",
- "v12": "iOS 12.0",
- "v13": "iOS 13.0",
- "v14": "iOS 14.0",
- "v15": "iOS 15.0",
- "v16": "iOS 16.0",
- "v17": "iOS 17.0",
- "v8": "iOS 8.0",
- "v9": "iOS 9.0"
- },
- "MacOS": {
- "V10": {
- "10": "OS X Yosemite 10.10",
- "11": "OS X El Capitan 10.11",
- "12": "macOS Sierra 10.12",
- "13": "macOS High Sierra 10.13",
- "14": "macOS Mojave 10.14",
- "15": "macOS Catalina 10.15",
- "7": "Mac OS X Lion 10.7",
- "8": "OS X Mountain Lion 10.8",
- "9": "OS X Mavericks 10.9"
- },
- "V11": {
- "0": "macOS Big Sur 11.0"
- },
- "V12": {
- "0": "macOS Monterey 12.0"
- },
- "V13": {
- "0": "macOS Ventura 13.0"
- },
- "V14": {
- "0": "macOS Sonoma 14.0"
- }
- },
- "Windows": {
- "V10Release": {
- "release1607": "Windows 10 1607",
- "release1703": "Windows 10 1703",
- "release1709": "Windows 10 1709",
- "release1803": "Windows 10 1803",
- "release1809": "Windows 10 1809",
- "release1903": "Windows 10 1903",
- "release1909": "Windows 10 1909",
- "release2004": "Windows 10 2004",
- "release21H1": "Windows 10 21H1",
- "release21H2": "Windows 10 21H2",
- "release22H2": "Windows 10 22H2",
- "release2H20": "Windows 10 20H2"
- },
- "V11Release": {
- "release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
- },
- "v10": "Windows 10.0",
- "v80": "Windows 8.0",
- "v81": "Windows 8.1"
- },
- "WindowsPhone": {
- "v80": "Windows Phone 8.0",
- "v81": "Windows Phone 8.1"
- }
- },
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
- "apps": "apps",
- "appsListName": "Application list",
- "blockingApps": "Blocking apps",
- "managedApps": "Managed apps",
- "noApps": "No applications",
- "noAppsError": "Error retrieving applications",
- "selectApps": "Select apps",
- "selectedAppsCount": "{0} apps selected (100 max)",
- "useSelectedAppsAll": "All",
- "useSelectedAppsSelected": "Selected",
- "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
- },
- "Header": {
- "application": "Application",
- "publisher": "Publisher",
- "version": "Version"
+ "AppProtection": {
+ "allAppTypes": "Target to all app types",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Apps in Android Work Profile",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
+ "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
+ "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
+ "appsOnUnmanagedDevices": "Apps on unmanaged devices",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Not Available",
+ "windows10PlatformLabel": "Windows 10 and later",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Project Online Desktop Client",
+ "visioProRetail": "Visio Online Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Failed to delete {0}",
+ "failureCa": "Failed to delete {0} because it is referenced by CA policies",
+ "modifying": "Deleting {0}",
+ "success": "Successfully deleted {0}"
+ },
+ "Notify": {
+ "failure": "Failed to update {0}",
+ "modifying": "Modifying {0}",
+ "success": "Successfully updated {0}"
+ },
+ "menuLabel": "Authentication context"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
+ "certificate": "Certificate authentication",
+ "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
+ "multifactor": "Multifactor authentication",
+ "require": "Require federated authentication method (Preview)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
+ },
+ "Option": {
+ "always": "Always persistent",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "label": "Persistent browser session",
+ "never": "Never persistent"
+ },
+ "Warning": {
+ "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Hours or days",
+ "value": "Frequency"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} days",
+ "singular": "1 day"
+ },
+ "Hour": {
+ "plural": "{0} hours",
+ "singular": "1 hour"
+ },
+ "daysOption": "Days",
+ "everytime": "Every time",
+ "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
+ "hoursOption": "Hours",
+ "label": "Sign-in frequency",
+ "placeholder": "Select units"
+ }
+ },
+ "mainOption": "Modify session lifetime",
+ "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
+ },
+ "SingleSelectorActive": {
+ "failed": "Unable to load this data.",
+ "reattempt": "Loading data. Reattempt {0} of {1}."
},
- "SearchBox": {
- "ariaLabel": "Search apps",
- "placeHolder": "Search by name or publisher"
- },
- "allowToUseToggle": "Allow users to use device if installation error occurs",
- "blockToggle": "Block device use until all apps and profiles are installed",
- "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
- "collectLogToggle": "Turn on log collection and diagnostics page for end users",
- "create": "Create Profile",
- "customMessageTextBox": "Error message",
- "customMessageToggle": "Show custom message when time limit or error occurs",
- "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
- "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
- "progressToggle": "Show app and profile configuration progress",
- "resetToggle": "Allow users to reset device if installation error occurs",
- "timeout": "Show an error when installation takes longer than specified number of minutes"
- },
- "TableHeaders": {
- "activity": "Activity",
- "activityName": "Activity name",
- "actor": "Initiated by (actor)",
- "actorType": "Actor type",
- "app": "App",
- "appName": "App name",
- "applicationName": "Application name",
- "approvalType": "Approval method",
- "assignedGroups": "Group",
- "assignment": "Assignment",
- "assignmentStatus": "Assigned",
- "assignments": "Assignments",
- "attributeName": "Attribute name",
- "attributeType": "Attribute type",
- "bundleId": "Bundle-Id",
- "category": "Category",
- "complianceGracePeriodExpiration": "Compliance grace period expiration",
- "configurationType": "Profile type",
- "conflictingPolicy": "Conflicting Policies",
- "createdDate": "Created date",
- "currentOs": "Current OS",
- "date": "Date",
- "dateRange": "Date range",
- "deployed": "Deployed",
- "description": "Description",
- "device": "Device",
- "deviceId": "Device ID",
- "deviceName": "Device name",
- "deviceOrApplicationName": "Device or application name",
- "deviceReporting": "Devices reporting",
- "diagnosticCode": "Diagnostic Code",
- "diagnosticText": "Diagnostic Text",
- "diagnostics": "Diagnostics",
- "displayName": "Display name",
- "driversToReview": "Drivers to review",
- "eSIMActivationStatus": "Activation status",
- "eSIMCellularStatus": "Cellular status",
- "eSIMICCID": "ICCID",
- "eSIMPoolName": "Cellular subscription",
- "eSIMState": "eSIM state",
- "eSIMTokenAmount": "Total eSIM activation codes",
- "enabled": "Enabled",
- "enabledPlatforms": "Enabled Platforms",
- "encryptionReadiness": "Encryption Readiness",
- "encryptionStatus": "Encryption Status",
- "endTime": "End time",
- "enrollment": "Enrollment",
- "enrollmentAttempt": "Enrollment start",
- "eventDateTime": "Timestamp",
- "eventIdentifier": "Event ID",
- "eventLevel": "Level",
- "excluded": "Excluded",
- "failure": "Failure",
- "featureUpdateDeferral": "Feature Deferral",
- "featureUpdateVersion": "Feature Update Version",
- "featureUpdatesPaused": "Feature (Paused)",
- "featureUpdatesStatus": "Feature",
- "from": "From",
- "groups": "Groups",
- "groupsSelected": "Groups Selected",
- "installationStatus": "Installation Status",
- "issueId": "Issue id",
- "lastCheckinTime": "Last Check-in Time",
- "lastModified": "Last modified",
- "lastScanTime": "Last Scan Time",
- "lastSuccessfulSync": "Last Successful Sync",
- "lastUpdated": "Last Updated",
- "location": "Location",
- "loggedInUser": "Logged in user",
- "message": "Message",
- "model": "Model",
- "mtdConnector": "MTD Connector",
- "name": "Profile name",
- "oSVersion": "OS Version",
- "operationType": "Operation type",
- "os": "OS",
- "packageName": "Package name",
- "partnerName": "Partner",
- "partnerStatus": "Partner status",
- "permission": "Permission",
- "platform": "Platform",
- "policies": "Policies",
- "policy": "Policy",
- "policyType": "Policy type",
- "preventedUpdateDays": "Restricted days",
- "priority": "Priority",
- "profiles": "Profiles",
- "publicAddress": "Public address",
- "publisher": "Publisher",
- "qualityUpdateDeferral": "Quality Deferral",
- "qualityUpdateRelease": "Quality Update Release",
- "qualityUpdateVersion": "Quality Update Version",
- "qualityUpdatesPaused": "Quality (Paused)",
- "qualityUpdatesStatus": "Quality",
- "reason": "Reason",
- "resource": "Resource",
- "roleName": "Name",
- "roles": "Roles",
- "scopeGroups": "Scope groups",
- "scopeSize": "Assigned Scope Groups",
- "scopeTags": "Scope tags",
- "scriptName": "Script name",
- "scriptType": "Script type",
- "servicingOption": "Servicing channel",
- "setting": "Setting",
- "settings": "Settings",
- "siteName": "Site name",
- "source": "Source",
- "sourceProfile": "Source Profile",
- "startTime": "Start time",
- "state": "State",
- "stateDetails": "State details",
- "status": "Status",
- "subject": "Subject",
- "support": "Support",
- "supportEndDate": "Support End Date",
- "tPMVersion": "TPM Version",
- "target": "Target",
- "timeWindows": "Time windows",
- "timeZone": "Time zone",
- "type": "Type",
- "updateScheduleType": "Schedule type",
- "updateStatus": "Update Status",
- "user": "User",
- "userPrincipalName": "User principal name",
- "users": "Users",
- "usersExcluded": "Users excluded",
- "usersTargeted": "Users targeted",
- "value": "Value",
- "includedGroups": "Included Groups",
- "excludedGroups": "Excluded Groups",
- "licenseType": "License type"
- },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Choose directory roles"
+ },
+ "Excluded": {
+ "gridAria": "List of excluded users"
+ },
+ "Included": {
+ "gridAria": "List of included users"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
+ "customRoleSelected": "At least one custom role is selected",
+ "failed": "\"{0}\" must be configured",
+ "roles": "Select at least one role",
+ "usersGroups": "Select at least one user or group"
+ },
+ "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
+ },
+ "advancedTabText": "Advanced",
+ "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
+ "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
+ "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
+ "allDayCheckboxLabel": "All day",
+ "allDevicePlatforms": "Any device",
+ "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
+ "allGuestUserLabel": "All guest and external users",
+ "allRiskLevelsOption": "All risk levels",
+ "allTrustedLocationLabel": "All trusted locations",
+ "allUserGroupSetSelectorLabel": "All users and groups selected",
+ "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
+ "allUsersString": "All users",
+ "and": "{0} AND {1} ",
+ "andWithGrouping": "({0}) AND {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Any cloud app",
+ "appContextOptionInfoContent": "Requested authentication tag",
+ "appContextOptionLabel": "Requested authentication tag (Preview)",
+ "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
+ "appNotSetSeletorLabel": "0 cloud apps selected",
+ "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
+ "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
+ "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
+ "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
+ "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
+ "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
+ "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
+ "applyConditonLabel": "Configure",
+ "ariaLabelPolicyDisabled": "Policy is disabled",
+ "ariaLabelPolicyEnabled": "Policy is enabled",
+ "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
+ "blockAccess": "Block access",
+ "builtInDirectoryRoleLabel": "Built-in directory roles",
+ "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "casInfoBubble": "This control works for various cloud apps.",
+ "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "cert64DownloadCol": "Download base64 certificate",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Download certificate",
+ "certDurationCol": "Expiry",
+ "certDurationStartCol": "Valid from",
+ "certName": "VpnCert",
+ "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Choose Applications",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Chosen Applications",
+ "chooseApplicationsEmpty": "No Applications",
+ "chooseApplicationsNone": "None",
+ "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseApplicationsPlural": "{0} and {1} more",
+ "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
+ "chooseApplicationsRemove": "Remove",
+ "chooseApplicationsReturnedPlural": "{0} applications found",
+ "chooseApplicationsReturnedSingular": "1 application found",
+ "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
+ "chooseApplicationsSearchHint": "Search Applications...",
+ "chooseApplicationsSearchLabel": "Applications",
+ "chooseApplicationsSearching": "Searching...",
+ "chooseApplicationsSelect": "Select",
+ "chooseApplicationsSelected": "Selected",
+ "chooseApplicationsSingular": "{0} and 1 more",
+ "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "chooseLocationCorpnetItem": "Corporate network",
+ "chooseLocationSelectedLocationsLabel": "Selected locations",
+ "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Choose Locations",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Chosen Locations",
+ "chooseLocationsEmpty": "No Locations",
+ "chooseLocationsExcludedSelectorTitle": "Select",
+ "chooseLocationsIncludedSelectorTitle": "Select",
+ "chooseLocationsNone": "None",
+ "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseLocationsPlural": "{0} and {1} more",
+ "chooseLocationsRemove": "Remove",
+ "chooseLocationsReturnedPlural": "{0} locations found",
+ "chooseLocationsReturnedSingular": "1 location found",
+ "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
+ "chooseLocationsSearchHint": "Search Locations...",
+ "chooseLocationsSearchLabel": "Locations",
+ "chooseLocationsSearching": "Searching...",
+ "chooseLocationsSelect": "Select",
+ "chooseLocationsSelected": "Selected",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
+ "chooseLocationsSingular": "{0} and 1 more",
+ "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "claimProviderAddCommandText": "New custom control",
+ "claimProviderAddNewBladeTitle": "New custom control",
+ "claimProviderDeleteCommand": "Delete",
+ "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "claimProviderDeleteTitle": "Are you sure?",
+ "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
+ "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
+ "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
+ "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
+ "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
+ "claimProviderNotificationCreateTitle": "Creating '{0}'",
+ "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
+ "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
+ "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
+ "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
+ "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
+ "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
+ "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
+ "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "claimProviderNotificationUpdateTitle": "Updating '{0}'",
+ "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
+ "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
+ "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
+ "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
+ "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
+ "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
+ "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
+ "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
+ "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
+ "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
+ "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
+ "claimProvidersNone": "No custom controls",
+ "claimProvidersSearchPlaceholder": "Search controls.",
+ "classicPoilcyFilterTitle": "Show",
+ "classicPolicyAllPlatforms": "All Platforms",
+ "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
+ "classicPolicyCloudAppTitle": "Cloud application",
+ "classicPolicyControlAllow": "Allow",
+ "classicPolicyControlBlock": "Block",
+ "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
+ "classicPolicyControlRequireCompliantDevice": "Require compliant device",
+ "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
+ "classicPolicyControlRequireMfa": "Require multifactor authentication",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
+ "classicPolicyDeleteCommand": "Delete",
+ "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
+ "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
+ "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
+ "classicPolicyDetailBladeTitle": "Details",
+ "classicPolicyDisableCommand": "Disable",
+ "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
+ "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
+ "classicPolicyDisableFailTitle": "Failed to disable classic policy",
+ "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
+ "classicPolicyDisableInProgressTitle": "Disabling classic policy",
+ "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
+ "classicPolicyDisableSuccessTitle": "Classic policy disabled",
+ "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
+ "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
+ "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
+ "classicPolicyFilterAll": "All policies",
+ "classicPolicyFilterDisabled": "Disabled policies",
+ "classicPolicyFilterEnabled": "Enabled policies",
+ "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
+ "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
+ "classicPolicyIncludedPlatformsTitle": "Included device platforms",
+ "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
+ "classicPolicyMigrateCommand": "Migrate",
+ "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
+ "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
+ "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
+ "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
+ "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
+ "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
+ "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
+ "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
+ "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
+ "classicPolicySaveFailDescription": "Failed to save '{0}'",
+ "classicPolicySaveFailTitle": "Failed to save classic policy",
+ "classicPolicySaveInProgressDescription": "Saving '{0}'",
+ "classicPolicySaveInProgressTitle": "Saving classic policy",
+ "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
+ "classicPolicySaveSuccessTitle": "Classic policy saved",
+ "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
+ "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
+ "clientAppBladeTitle": "Client apps",
+ "clientAppDescription": "Select the client apps this policy will apply to",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
+ "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
+ "clientAppLegacyHeader": "Legacy authentication clients",
+ "clientAppMobileDesktop": "Mobile apps and desktop clients",
+ "clientAppModernHeader": "Modern authentication clients",
+ "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
+ "clientAppSelectSpecificClientApps": "Select client apps",
+ "clientAppWebBrowser": "Browser",
+ "clientAppsSelectedLabel": "{0} included",
+ "clientTypeBrowser": "Browser",
+ "clientTypeEas": "Exchange ActiveSync clients",
+ "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
+ "clientTypeModernAuth": "Modern authentication clients",
+ "clientTypeOtherClients": "Other clients",
+ "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
+ "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
+ "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
+ "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
+ "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
+ "cloudappsSelectorPluralExcluded": "{0} apps excluded",
+ "cloudappsSelectorPluralIncluded": "{0} apps included",
+ "cloudappsSelectorSingularExcluded": "1 app excluded",
+ "cloudappsSelectorSingularIncluded": "1 app included",
+ "cloudappsSelectorUserPlural": "{0} apps",
+ "cloudappsSelectorUserSingular": "1 app",
+ "conditionLabelMulti": "{0} conditions selected",
+ "conditionLabelOne": "1 condition selected",
+ "conditionalAccessBladeTitle": "Conditional Access",
+ "conditionsNotSelectedLabel": "Not configured",
+ "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
+ "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
+ "configureCasText": "Configure Cloud App Security",
+ "configureCustomControlsText": "Configure custom policy",
+ "controlLabelMulti": "{0} controls selected",
+ "controlLabelOne": "1 control selected",
+ "controlValidatorText": "Please select at least one control",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
+ "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
+ "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
+ "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
+ "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
+ "controlsMamInfoBubble": "Device must use these approved client applications.",
+ "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
+ "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
+ "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
+ "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
+ "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
+ "createNewVpnCert": "New certificate",
+ "createdTimeLabel": "Creation time",
+ "customRoleLabel": "Custom roles (not supported)",
+ "dateRangeTypeLabel": "Date range",
+ "daysOfWeekPlaceholderText": "Filter days of the week",
+ "daysOfWeekTypeLabel": "Days of the week",
+ "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
+ "descriptionContentForControlsAndOr": "For multiple controls",
+ "devicePlatform": "Device platform",
+ "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} included",
+ "devicePlatformIncludeExclude": "{0} and {1} excluded",
+ "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
+ "devicePlatformsNone": "None",
+ "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
+ "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
+ "deviceStateAll": "All device state",
+ "deviceStateCompliant": "Device marked as compliant",
+ "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
+ "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
+ "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
+ "deviceStateConditionSelectorLabel": "Device state (deprecated)",
+ "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
+ "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
+ "deviceStateDomainJoinedInfoLinkText": "Learn more.",
+ "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
+ "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
+ "directoryRolesLabel": "Directory roles",
+ "discardbutton": "Discard",
+ "downloadDefaultFileName": "IP Ranges",
+ "downloadExampleFileName": "Example",
+ "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
+ "duplicate": "Duplicate",
+ "duplicatePolicyName": "{0} COPY",
+ "endDatePickerLabel": "Ends",
+ "endTimePickerLabel": "End time",
+ "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
+ "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
+ "enterUserText": "No user is selected. Select a user.",
+ "evaluationResult": "Evaluation result",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
+ "excludeAllTrustedLocationSelectorText": "all trusted locations",
+ "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
+ "friday": "Friday",
+ "grantControls": "Grant controls",
+ "gridNetworkTrusted": "Trusted",
+ "gridPolicyCreatedDateTime": "Creation Date",
+ "gridPolicyEnabled": "Enabled",
+ "gridPolicyModifiedDateTime": "Modified Date",
+ "gridPolicyName": "Policy Name",
+ "gridPolicyState": "State",
+ "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
+ "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
+ "groupSelectionBladeSelect": "Select groups",
+ "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "groupsSelectionBladeTitle": "Groups",
+ "helpCommonScenariosText": "Interested in common scenarios?",
+ "helpCondition1": "When any user is outside the company network",
+ "helpCondition2": "When users in the 'Managers' group sign-in",
+ "helpConditionsTitle": "Conditions",
+ "helpControl1": "They're required to sign in with multifactor authentication",
+ "helpControl2": "They are required be on an Intune compliant or domain-joined device",
+ "helpControlsTitle": "Controls",
+ "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
+ "helpIntroTitle": "What is Conditional Access?",
+ "helpLearnMoreText": "Want to learn more about Conditional Access?",
+ "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
+ "helpStartStep2": "Specify policy Conditions and Controls",
+ "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
+ "helpStartTitle": "Get started",
+ "highRisk": "High",
+ "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
+ "includeAppsTextFormat": "Include: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
+ "includeUnknownAreasCheckboxLabel": "Include unknown areas",
+ "infoCommandLabel": "Info",
+ "invalidCertDuration": "Invalid cert duration",
+ "invalidIpAddress": "Value must be a valid IP address",
+ "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
+ "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Load all",
+ "loading": "Loading...",
+ "locationConfigureNamedLocationsText": "Configure all trusted locations",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
+ "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
+ "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
+ "locationsAllLocationsLabel": "Any location",
+ "locationsAllNamedLocationsLabel": "All trusted IPs",
+ "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
+ "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
+ "locationsSelectedPrivateLinksLabel": "Selected Private Links",
+ "lowRisk": "Low",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
+ "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
+ "markAsTrustedCheckboxLabel": "Mark as trusted location",
+ "mediumRisk": "Medium",
+ "memberSelectionCommandRemove": "Remove",
+ "menuItemClaimProviderControls": "Custom controls (Preview)",
+ "menuItemClassicPolicies": "Classic policies",
+ "menuItemInsightsAndReporting": "Insights and reporting",
+ "menuItemManage": "Manage",
+ "menuItemNamedLocationsPreview": "Named locations (Preview)",
+ "menuItemNamedNetworks": "Named locations",
+ "menuItemPolicies": "Policies",
+ "menuItemTermsOfUse": "Terms of use",
+ "modifiedTimeLabel": "Modified time",
+ "monday": "Monday",
+ "nameLabel": "Name",
+ "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
+ "namedLocationTypeCountry": "Countries/Regions",
+ "namedLocationTypeLabel": "Define the location using:",
+ "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
+ "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "You need to select at least one country/region",
+ "namedNetworkDeleteCommand": "Delete",
+ "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "namedNetworkDeleteTitle": "Are you sure?",
+ "namedNetworkDownloadIpRange": "Download",
+ "namedNetworkInvalidRange": "Value must be a valid IP range.",
+ "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
+ "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
+ "namedNetworkIpRangesTab": "IP ranges",
+ "namedNetworkListAdd": "New location",
+ "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
+ "namedNetworkNameDescription": "Example: 'Redmond office'",
+ "namedNetworkNameInvalid": "The supplied name is invalid.",
+ "namedNetworkNameRequired": "You must supply a name for this location.",
+ "namedNetworkNoIpRanges": "No IP ranges",
+ "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
+ "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
+ "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
+ "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
+ "namedNetworkNotificationCreateTitle": "Creating '{0}'",
+ "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
+ "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
+ "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
+ "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
+ "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
+ "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
+ "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
+ "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
+ "namedNetworkSearchPlaceholder": "Search locations.",
+ "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
+ "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
+ "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
+ "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
+ "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
+ "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
+ "namedNetworkUploadIpRange": "Upload",
+ "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
+ "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
+ "namedNetworksAdd": "New named location",
+ "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} and {1} excluded",
+ "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} included",
+ "namedNetworksNone": "No named locations found.",
+ "namedNetworksTitle": "Configure locations",
+ "namednetworkExceedingSizeErrorBladeTitle": "Error details",
+ "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
+ "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
+ "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
+ "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
+ "newCertName": "new cert",
+ "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
+ "noPolicyRowMessage": "No policies",
+ "noSPSelected": "No service principal selected",
+ "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
+ "noUserSelected": "No user selected",
+ "noneRisk": "No risk",
+ "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
+ "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
+ "oneUserSelected": "1 user selected",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
+ "or": "{0} OR {1} ",
+ "pickerDoneCommand": "Done",
+ "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
+ "policiesBladeTitle": "Policies",
+ "policiesBladeTitleWithAppName": "Policies: {0}",
+ "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
+ "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
+ "policyAssignmentsSection": "Assignments",
+ "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
+ "policyCloudAppsDisplayTextAllApp": "All apps",
+ "policyCloudAppsLabel": "Cloud apps",
+ "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionDevicePlatform": "Device platforms",
+ "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
+ "policyConditionLocation": "Locations",
+ "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
+ "policyConditionLocationPreview": "Locations (Preview)",
+ "policyConditionSigninRisk": "Sign-in risk",
+ "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
+ "policyConditionUserRisk": "User risk",
+ "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
+ "policyConditioniClientApp": "Client apps",
+ "policyControlAllowAccessDisplayedName": "Grant access",
+ "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
+ "policyControlBladeTitle": "Grant",
+ "policyControlBlockAccessDisplayedName": "Block access",
+ "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
+ "policyControlContentDescription": "Control access enforcement to block or grant access.",
+ "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
+ "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
+ "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
+ "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
+ "policyControlRequireMamDisplayedName": "Require approved client app",
+ "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
+ "policyControlSelectAuthStrength": "Require authentication strength",
+ "policyControlsNoControlsSelected": "0 controls selected",
+ "policyControlsSection": "Access controls",
+ "policyCreatBladeTitle": "New",
+ "policyCreateButton": "Create",
+ "policyCreateFailedMessage": "Error: {0}",
+ "policyCreateFailedTitle": "Failed to create '{0}'",
+ "policyCreateInProgressTitle": "Creating '{0}'",
+ "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyCreateSuccessTitle": "Successfully created '{0}'",
+ "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "policyDeleteFailTitle": "Failed to delete '{0}'",
+ "policyDeleteInProgressTitle": "Deleting '{0}'",
+ "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
+ "policyEnforceLabel": "Enable policy",
+ "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
+ "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
+ "policyErrorUnknown": "Something went wrong, please try again later.",
+ "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
+ "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
+ "policyNameCannotBeEmpty": "Policy name can't be empty",
+ "policyNameDevice": "Device policy",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Mobile App Management policy",
+ "policyNameMfaLocation": "Multifactor authentication and location policy",
+ "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
+ "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
+ "policyOff": "Off",
+ "policyOn": "On",
+ "policyReportOnly": "Report-only",
+ "policyReviewSection": "Review",
+ "policySaveButton": "Save",
+ "policyStatusIconDescription": "Policy is Enabled",
+ "policyStatusIconEnabled": "Enabled status icon",
+ "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
+ "policyTemplateName2": "Allow {0} access only on managed devices",
+ "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
+ "policyTriggerRiskSpecific": "Select specific risk level",
+ "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
+ "policyTriggersNoConditionsSelected": "0 conditions selected",
+ "policyTriggersSelectorLabel": "Conditions",
+ "policyUpdateFailedMessage": "Error: {0}",
+ "policyUpdateFailedTitle": "Failed to update {0}",
+ "policyUpdateInProgressTitle": "Updating {0}",
+ "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyUpdateSuccessTitle": "Successfully updated {0}",
+ "primaryCol": "Primary",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
+ "requireAllControlsText": "Require all the selected controls",
+ "requireCompliantDevice": "Require compliant device",
+ "requireDomainJoined": "Require domain-joined device",
+ "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
+ "requireMFA": "Require multifactor authentication",
+ "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
+ "requireOneControlText": "Require one of the selected controls",
+ "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
+ "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
+ "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
+ "resetFilters": "Reset filters",
+ "sPRequired": "Service principal required",
+ "sPSelectorInfoBalloon": "User or Service Principal you want to test",
+ "saturday": "Saturday",
+ "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
+ "securityDefaultsPolicyName": "Security defaults",
+ "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
+ "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
+ "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
+ "selectDevicePlatforms": "Select device platforms",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Select locations",
+ "selectedSP": "Selected Service Principal",
+ "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
+ "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
+ "servicePrincipalDataGridAria": "List of available service principals",
+ "servicePrincipalDropDownLabel": "What does this policy apply to?",
+ "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
+ "servicePrincipalRadioAll": "All owned service principals",
+ "servicePrincipalRadioSelect": "Select service principals",
+ "servicePrincipalSelectionsAria": "Selected service principals grid",
+ "servicePrincipalSelectorAria": "List of chosen service principals",
+ "servicePrincipalSelectorMultiple": "{0} service principals selected",
+ "servicePrincipalSelectorSingle": "1 service principal selected",
+ "servicePrincipalSpecificExc": "Specific service principals excluded",
+ "servicePrincipalSpecificInc": "Specific service principals included",
+ "servicePrincipals": "Service principals",
+ "sessionControlBladeTitle": "Session",
+ "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
+ "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
+ "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
+ "sessionControls": "Session controls",
+ "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
+ "sessionControlsCasLabel": "Use Conditional Access App Control",
+ "sessionControlsSecureSignInLabel": "Require token binding",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} included",
+ "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
+ "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
+ "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
+ "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
+ "specificUsersExcluded": "specific users excluded",
+ "specificUsersIncluded": "Specific users included",
+ "specificUsersIncludedAndExcluded": "Specific users excluded and included",
+ "startDatePickerLabel": "Starts",
+ "startFreeTrial": "Start a free trial",
+ "startTimePickerLabel": "Start time",
+ "sunday": "Sunday",
+ "testButton": "What If",
+ "thumbprintCol": "Thumbprint",
+ "thursday": "Thursday",
+ "timeConditionAllTimesLabel": "Any time",
+ "timeConditionIntroText": "Configure the time this policy will apply to",
+ "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
+ "timeConditionSelectorLabel": "Time (Preview)",
+ "timeConditionSpecificLabel": "Specific times",
+ "timeSelectorAllTimesText": "Any time",
+ "timeSelectorSpecificTimesText": "Specific times configured",
+ "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
+ "timeZoneDropdownLabel": "Time zone",
+ "timeZoneDropdownPlaceholderText": "Select a time zone",
+ "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
+ "tooManyPoliciesTitle": "More than 50 policies found",
+ "trustedLocationStatusIconDescription": "Location is trusted",
+ "trustedLocationStatusIconEnabled": "Trusted status icon",
+ "tuesday": "Tuesday",
+ "uploadInBadState": "Unable to upload the specified file.",
+ "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
+ "upsellAppsTitle": "Secure applications",
+ "upsellBannerText": "Get a free Premium trial to use this feature",
+ "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
+ "upsellDataTitle": "Secure data",
+ "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
+ "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
+ "upsellRiskTitle": "Protect against risk",
+ "upsellTitle": "Conditional Access",
+ "upsellWhyTitle": "Why use Conditional Access?",
+ "userAppNoneOption": "None",
+ "userNamePlaceholderText": "Enter User Name",
+ "userNotSetSeletorLabel": "0 users and groups selected",
+ "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
+ "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
+ "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
+ "userOrSPSelectionBladeTitle": "Users or workload identities",
+ "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
+ "userRequired": "User Required",
+ "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
+ "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
+ "userSPRequired": "User or Service principal required",
+ "userSPSelectorTitle": "User or Workload identity",
+ "userSelectionBladeAllUsersAndGroups": "All users and groups",
+ "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
+ "userSelectionBladeExcludeTabTitle": "Exclude",
+ "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
+ "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
+ "userSelectionBladeIncludeTabTitle": "Include",
+ "userSelectionBladeIncludedSelectorTitle": "Select",
+ "userSelectionBladeSelectUsers": "Select users",
+ "userSelectionBladeSelectedUsers": "Select users and groups",
+ "userSelectionBladeTitle": "Users and groups",
+ "userSelectorBladeTitle": "Users",
+ "userSelectorExcluded": "{0} excluded",
+ "userSelectorGroupPlural": "{0} groups",
+ "userSelectorGroupSingular": "1 group",
+ "userSelectorIncluded": "{0} included",
+ "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "userSelectorSelected": "{0} selected",
+ "userSelectorTitle": "User",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} users",
+ "userSelectorUserSingular": "1 user",
+ "userSelectorWithExclusion": "{0} and {1}",
+ "usersGroupsLabel": "Users and groups",
+ "viewApprovedAppsText": "See list of approved client apps",
+ "viewCompliantAppsText": "See list of policy protected client apps",
+ "viewPolicyInformation": "View policy information",
+ "vpnBladeTitle": "VPN connectivity",
+ "vpnCertCreateFailedMessage": "Error: {0}",
+ "vpnCertCreateFailedTitle": "Failed to create {0}",
+ "vpnCertCreateInProgressTitle": "Creating {0}",
+ "vpnCertCreateSuccessMessage": "Successfully created {0}.",
+ "vpnCertCreateSuccessTitle": "Successfully created {0}",
+ "vpnCertNoRowsMessage": "No VPN certificates found",
+ "vpnCertUpdateFailedMessage": "Error: {0}",
+ "vpnCertUpdateFailedTitle": "Failed to update {0}",
+ "vpnCertUpdateInProgressTitle": "Updating {0}",
+ "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
+ "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
+ "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
+ "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
+ "vpnMenuText": "VPN connectivity",
+ "vpncertDropdownDefaultOption": "Duration",
+ "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
+ "vpncertDropdownLabel": "Select duration",
+ "vpncertDropdownOneyearOption": "1 year",
+ "vpncertDropdownThreeyearOption": "3 years",
+ "vpncertDropdownTwoyearOption": "2 years",
+ "wednesday": "Wednesday",
+ "whatIfCountry": "Country/Region",
+ "whatIfCountryInfo": "The country/region the user is signing in from.",
+ "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
+ "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
+ "whatIfIpAddress": "IP address",
+ "whatIfIpAddressInfo": "IP address the user is signing in from.",
+ "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
+ "whatIfSelectCountry": "Select country/region...",
+ "whatIfSelectDevicePlatform": "Select device platform...",
+ "whatIfSelectPrivateLink": "Select private link...",
+ "whatIfSelectSignInRisk": "Select sign-in risk...",
+ "whatIfSignInRisk": "Sign-in risk",
+ "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
+ "whatIfUnknownAreas": "Unknown Areas",
+ "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Workload identities (preview)",
+ "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
+ "workloadIdentity": "Workload identity"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Overview"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load iOS software update profiles"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS update profile",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profile"
+ },
+ "listLoadError": "Unable to load iOS software update profiles, try again later",
+ "lowercase": "iOS update policy",
+ "uppercase": "iOS Update policy"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
+ "latestUpdate": "Latest update",
+ "noLongerSupported": "Selected version is no longer supported",
+ "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
+ "prefix": "Install iOS/iPadOS",
+ "selectSupported": "Select update version supported by Apple",
+ "updateToInstall": "Update to install"
+ },
+ "Schedule": {
+ "always": "Update at next check-in",
+ "duringTimeWindows": "Update during scheduled time",
+ "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
+ "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
+ "label": "Schedule type",
+ "outsideActiveHours": "Update outside of active hours (legacy)",
+ "outsideTimeWindows": "Update outside of scheduled time",
+ "timeWindow": "Time window",
+ "timeZone": "Time zone",
+ "title": "Update policy schedule settings:",
+ "weekly": "Weekly schedule",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
+ "label": "Select version to install"
+ },
+ "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
+ "notAvailable": "N/A"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "There are no iOS update policies to display",
+ "macOsUpdates": "There are no macOS software update policies to display",
+ "windowsUpdates": "There are no update rings for Windows 10 and later to show."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Device name",
+ "deviceUpdateStatus": "Device update status",
+ "lastUpdated": "Last updated",
+ "osVersion": "OS version",
+ "userPrincipalName": "User name"
+ },
+ "maximumOSVersionFilter": "Maximum OS version",
+ "minimumOSVersionFilter": "Minimum OS version",
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by device name, user name or OS version",
+ "title": "Account summary for macOS devices"
+ },
+ "Category": {
+ "configurationDataFile": "Configuration data file",
+ "critical": "Critical",
+ "firmware": "Firmware",
+ "other": "Other"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "successfulUpdateCount": "Successful updates deployed",
+ "totalUpdateCount": "Total updates deployed",
+ "updateCategory": "Update category",
+ "updateCategoryStatus": "Update category status"
+ },
+ "noData": "No data to display"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load macOS software update profiles"
+ }
+ },
+ "State": {
+ "available": "Available",
+ "commandFailed": "Command failed",
+ "downloadFailed": "Download failed",
+ "downloadInsufficientNetwork": "Download insufficient network",
+ "downloadInsufficientPower": "Download insufficient power",
+ "downloadInsufficientSpace": "Download insufficient space",
+ "downloaded": "Downloaded",
+ "downloading": "Downloading",
+ "idle": "Idle",
+ "installFailed": "Install failed",
+ "installInsufficientPower": "Install insufficient power",
+ "installInsufficientSpace": "Install insufficient space",
+ "installing": "Installing",
+ "scheduled": "Scheduled",
+ "success": "Success",
+ "unknown": "Unknown"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "updateName": "Update name",
+ "updateStatus": "Update status",
+ "version": "Version"
+ },
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by update name or version"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS update profile",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profile"
+ },
+ "error": "Error",
+ "errorOrErrors": "Error(s)",
+ "errors": "Errors",
+ "listLoadError": "Unable to load macOS software update profiles, try again later",
+ "lowercase": "macOs update policy",
+ "other": "Other",
+ "subtitle": "MacOS software update",
+ "upToDate": "Up to date",
+ "uppercase": "macOS Update Policy"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Please try again later",
+ "title": "Failed to delete {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Please try again later"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Please try again later",
+ "title": "Failed to load {0}"
+ },
+ "idWrongFormat": "The provided id for the profile is not in the expected format."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "At least one time window should be selected",
+ "tooMany": "A maximum of 20 time windows can be configured"
+ }
+ },
+ "endDay": "End day",
+ "endTime": "End time",
+ "startDay": "Start day",
+ "startTime": "Start time",
+ "timeWindowError": "Choose a window of time that spans at least one hour."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load update ring profiles for Windows 10 and later."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Update ring for Windows 10 and later",
+ "title": "Windows Update for Business"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 and later",
+ "title": "Update ring for Windows 10 and later"
+ },
+ "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
+ "lowercase": "Update ring",
+ "uppercase": "Update Ring"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Update policy settings",
+ "updateRingSettings": "Update ring settings"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Create {0}",
+ "edit": "Edit {0}"
+ }
+ },
+ "notScannedYet": "Not scanned yet",
+ "outOfDateIosDevices": "Out of date iOS devices"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge, version 77 and later",
+ "storeApp": "Store app",
+ "office365Suite": "Microsoft 365 Apps",
+ "microsoftDefenderATP": "Microsoft Defender for Endpoint",
+ "other": "Other",
+ "webApplication": "Web Application"
+ },
+ "Filters": {
+ "ruleSyntax": "Rule syntax",
+ "filters": "Filters"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Please select a discovery script",
+ "scriptFileLabel": "Select your discovery script"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
+ "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Script",
+ "placeholder": "Click to select",
+ "searchboxPlaceholder": "Search by script name",
+ "title": "Select a discovery script"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Custom compliance rules summary"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
+ "noFileSelectedError": "Please select a json file",
+ "parseFileSelectedError": "The json file is invalid"
+ }
+ },
"TAP": {
"AccessRequirements": {
"infoText": "Configure the PIN and credential requirements that users must meet to access apps in a work context."
@@ -1311,393 +3937,193 @@
"selectOne": "Select at least one app to create a policy."
}
},
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "CoManagementAuthority": {
- "Confirmation": {
- "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
- "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
- },
- "Grid": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
- "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
- "label": "Co-management authority"
- },
- "Header": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
- },
- "Main": {
- "title": "Co-management Authority"
- },
- "MessageSaved": {
- "body": "Co-management authority policy created."
- },
- "Notification": {
- "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
- "created": "This Co-management authority policy has not been assigned to any users.",
- "creating": "Creating Co-management authority policy",
- "creatingMessage": "Creating {0} Co-management authority policy",
- "deleteError": "An error occurred while deleting Co-management authority policy",
- "deleted": "Co-management authority policy deleted.",
- "deletedMessage": "{0} Co-management authority policy is deleted.",
- "deleting": "Deleting Co-management Authority policy",
- "deletingMessage": "Deleting {0} Co-management Authority policy",
- "fetchError": "An error occurred while displaying Co-management authority policies",
- "saved": "Co-management Authority saved.",
- "savedMessage": "{0} Co-management Authority policy successfully saved.",
- "saving": "Saving Co-management authority",
- "savingMessage": "Saving {0} Co-management authority policy"
- },
- "Priority": {
- "saveError": "An error occurred while saving Co-management authority priorities",
- "saved": "Co-management authority priorities were successfully saved."
- },
- "ReloadNotification": {
- "description": "Reload the Co-management authority policy to try again.",
- "title": "Reload the Co-management authority blade"
- },
- "advancedProperty": "Advanced",
- "commandLineArgs": "Client installation command line arguments.",
- "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
- "enterArgument": "Enter argument",
- "installAgent": "Automatically install Configuration Manager agent.",
- "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
- "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
- "pageDescription": "Co-management authority profiles",
- "pageSetting": "Co-management authority Setting",
- "pageTitle": "Co-management authority",
- "settingDescription": "The co-management settings determine who owns the workloads."
- },
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "webApp": "Web link",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "TAPSettings": {
- "AllowedDataIngestionLocations": {
- "label": "Allow users to open data from selected services",
- "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
- },
- "AndroidBackup": {
- "label": "Backup org data to Android backup services",
- "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender for Endpoint",
+ "androidDeviceOwnerApplications": "Applications",
+ "androidDeviceOwnerPolicyMessages": "Custom support information",
+ "androidForWorkPassword": "Device password",
+ "appManagement": "Allow or Block apps",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Restricted Apps",
+ "applicationVisibility": "Show or Hide Apps",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, Doc Viewing, Gaming",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Apps and experience",
+ "associatedDomains": "Associated domains",
+ "autonomousSingleAppMode": "Autonomous Single App Mode",
+ "azureOperationalInsights": "Azure operational insights",
+ "bitLocker": "Windows Encryption",
+ "bootOptions": "Boot options",
+ "browser": "Browser",
+ "builtinApps": "Built-in apps",
+ "cameras": "Cameras",
+ "cellular": "Cellular",
+ "cloudAndStorage": "Cloud and Storage",
+ "cloudPrint": "Cloud Printer",
+ "complianceEmailProfile": "Email",
+ "connectedDevices": "Connected devices",
+ "connectivity": "Cellular and connectivity",
+ "contentCaching": "Content caching",
+ "controlPanelAndSettings": "Control Panel and Settings",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Custom Compliance",
+ "customConfiguration": "Custom Configuration Profile",
+ "customOMASettings": "Custom OMA-URI Settings",
+ "customPreferences": "Preference file",
+ "dFCISecuritySettings": "Security settings",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows Firewall",
+ "defenderLocalSecurityOptions": "Local device security options",
+ "defenderSecurityCenter": "Microsoft Defender Security Center",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedCredentialAuthenticationConfiguration": "Derived credential",
+ "deviceExperience": "Device experience",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Microsoft Defender Application Control",
+ "deviceHealth": "Device Health",
+ "devicePassword": "Device password",
+ "deviceProperties": "Device Properties",
+ "deviceRestrictions": "General",
+ "deviceSecurity": "System security",
+ "display": "Display",
+ "domainJoin": "Domain Join",
+ "domains": "Domains",
+ "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge kiosk mode",
+ "editionUpgrade": "Edition Upgrade",
+ "education": "Education",
+ "educationDeviceCerts": "Device certificates",
+ "educationStudentCerts": "Student certificates",
+ "educationTakeATest": "Take a Test",
+ "educationTeacherCerts": "Teacher certificates",
+ "emailProfile": "Email",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Single sign-on app extension",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Games",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Health monitoring",
+ "homeScreenLayout": "Home Screen Layout",
+ "iOSWallpaper": "Wallpaper",
+ "importedPFX": "PKCS Imported Certificate",
+ "iosDefenderAtp": "Microsoft Defender for Endpoint",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Kernel extensions",
+ "keyboardAndDictionary": "Keyboard and dictionary",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Dedicated devices",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Kiosk web browser",
+ "lockScreenMessage": "Lock Screen Message",
+ "lockedScreenExperience": "Locked Screen Experience",
+ "logging": "Reporting and Telemetry",
+ "loginItems": "Login items",
+ "loginWindow": "Login window",
+ "macDefenderAtp": "Microsoft Defender for Endpoint",
+ "maintenance": "Maintenance",
+ "malware": "Malware",
+ "messaging": "Messaging",
+ "microphonesAndSpeakers": "Microphones and speakers",
+ "networkBoundary": "Network boundary",
+ "networkProxy": "Network proxy",
+ "notifications": "App Notifications",
+ "pKCS": "PKCS Certificate",
+ "password": "Password",
+ "personalProfile": "Personal profile",
+ "personalization": "Personalization",
+ "policyOverride": "Override Group Policy",
+ "ports": "Ports",
+ "powerSettings": "Power Settings",
+ "printer": "Printer",
+ "privacy": "Privacy",
+ "privacyPerApp": "Per-app privacy exceptions",
+ "privacyPreferences": "Privacy preferences",
+ "projection": "Projection",
+ "radios": "Radios",
+ "sCCMCompliance": "Configuration Manager Compliance",
+ "sCEP": "SCEP Certificate",
+ "sCEPProperties": "SCEP Certificate",
+ "sMode": "Mode switch (Windows Insider only)",
+ "safari": "Safari",
+ "search": "Search",
+ "session": "Session",
+ "sharedDevice": "Shared iPad",
+ "sharedPCAccountManager": "Shared multi-user device",
+ "singleSignOn": "Single sign-on",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Settings",
+ "start": "Start",
+ "systemExtensions": "System extensions",
+ "systemSecurity": "System Security",
+ "trustedCert": "Trusted Certificate",
+ "uEFIAccess": "UEFI access",
+ "updates": "Updates",
+ "userRights": "User Rights",
+ "usersAndAccounts": "Users and Accounts",
+ "vPN": "Base VPN",
+ "vPNApps": "Automatic VPN",
+ "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
+ "vPNConditionalAccess": "Conditional Access",
+ "vPNConnectivity": "Connectivity",
+ "vPNDNSTriggers": "DNS Settings",
+ "vPNIKEv2": "IKEv2 settings",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Split Tunneling",
+ "vPNTrustedNetwork": "Trusted Network Detection",
+ "wakeSettings": "Wake settings",
+ "webContentFilter": "Web Content Filter",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender for Endpoint",
+ "windowsDefenderATP": "Microsoft Defender for Endpoint",
+ "windowsHelloForBusiness": "Windows Hello for Business",
+ "windowsSpotlight": "Windows Spotlight",
+ "wiredNetwork": "Wired network",
+ "wireless": "Wireless",
+ "wirelessProjection": "Wireless projection",
+ "workProfile": "Work profile settings",
+ "workProfilePassword": "Work profile password",
+ "xboxServices": "Xbox services",
+ "zebraMx": "MX profile (Zebra only)",
+ "complianceActionsLabel": "Actions for noncompliance"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Allowed URLs",
+ "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
},
- "AndroidBiometricAuthentication": {
- "label": "Biometrics instead of PIN for access",
- "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
- },
- "AndroidFingerprint": {
- "label": "Fingerprint instead of PIN for access (Android 6.0+)",
- "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
- },
- "AndroidOverrideFingerprint": {
- "label": "Override biometrics with PIN after timeout"
- },
- "AppPIN": {
- "label": "App PIN when device PIN is set",
- "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
- },
- "BlockDataIngestionIntoOrganizationDocuments": {
- "label": "Open data into Org documents",
- "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
- "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
- "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
- "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
- },
- "ConnectToVpnOnLaunch": {
- "label": "Start Microsoft Tunnel connection on app-launch",
- "tooltip": "Allow connection to VPN when app is launch"
- },
- "CredentialsForAccess": {
- "label": "Work or school account credentials for access",
- "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
- },
- "CustomBrowserDisplayName": {
- "label": "Unmanaged Browser Name",
- "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
- },
- "CustomBrowserPackageId": {
- "label": "Unmanaged Browser ID",
- "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
- },
- "CustomBrowserProtocol": {
- "label": "Unmanaged browser protocol",
- "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
- },
- "DialerRestrictionLevel": {
- "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
- "label": "Transfer telecommunication data to",
- "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "EncryptData": {
- "label": "Encrypt org data",
- "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
- },
- "EncryptDataAndroid": {
- "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
- },
- "EncryptDataIos": {
- "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 128-bit AES encryption to app data.",
- "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
- "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
- },
- "EncryptDataOnEnrolledDevices": {
- "label": "Encrypt org data on enrolled devices",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
- },
- "IOSBackup": {
- "label": "Backup org data to iTunes and iCloud backups",
- "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
- },
- "IOSFaceID": {
- "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
- "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
- },
- "IOSOverrideTouchId": {
- "label": "Override biometrics with PIN after timeout"
- },
- "IOSTouchId": {
- "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
- "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
- },
- "MessagingRedirectAppDisplayName": {
- "label": "Messaging App Name"
- },
- "MessagingRedirectAppPackageId": {
- "label": "Messaging App Package ID"
+ "ApplicationProxyRedirection": {
+ "header": "Application proxy",
+ "title": "Application proxy redirection",
+ "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
},
- "MessagingRedirectAppUrlScheme": {
- "label": "Messaging App URL Scheme"
- },
- "NotificationRestriction": {
- "label": "Org data notifications",
- "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
- },
- "OpenLinksManagedBrowser": {
- "label": "Restrict web content transfer with other apps",
- "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
- },
- "OverrideBiometric": {
- "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
- },
- "PinAccess": {
- "label": "PIN for access",
- "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
- },
- "PinLength": {
- "label": "Select minimum PIN length",
- "tooltip": "This setting specifies the minimum number of digits of a PIN."
- },
- "PinType": {
- "label": "PIN type",
- "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
- },
- "Printing": {
- "label": "Printing org data",
- "tooltip": "If blocked, the app cannot print protected data."
- },
- "ProtectedMessagingRedirectAppType": {
- "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
- "label": "Transfer messaging data to",
- "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "ReceiveData": {
- "label": "Receive data from other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ "BlockedURLs": {
+ "title": "Blocked URLs",
+ "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
+ },
+ "Bookmarks": {
+ "header": "Managed bookmarks",
+ "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
+ "uRL": "URL"
},
- "RecheckAccessAfter": {
- "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
- "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
- },
- "RequireClass3Biometrics": {
- "label": "Class 3 Biometrics (Android 9.0+)",
- "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
- },
- "RequirePinAfterBiometricChange": {
- "label": "Override Biometrics with PIN after biometric updates",
- "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
- },
- "RestrictKeyboards": {
- "duplicatePackageError": "The package ID must be unique.",
- "invalidPackageError": "Invalid package ID",
- "label": "Approved keyboards",
- "select": "Select keyboards to approve",
- "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
- "title": "Add approved keyboards",
- "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
- },
- "SaveData": {
- "label": "Save copies of org data",
- "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
- },
- "SaveDataToSelected": {
- "label": "Allow user to save copies to selected services",
- "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
- },
- "ScreenCaptureAndAndroidAssistant": {
- "label": "Screen capture and Google Assistant\n",
- "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
- },
- "SendData": {
- "label": "Send org data to other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
- },
- "SimplePin": {
- "label": "Simple PIN",
- "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
- },
- "SyncContacts": {
- "label": "Sync policy managed app data with native apps or add-ins"
- },
- "ThirdPartyKeyboards": {
- "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
- "label": "Third party keyboards"
- },
- "Timeout": {
- "label": "Timeout (minutes of inactivity)"
- },
- "WinCutCopyPaste": {
- "label": "Allow cut, copy, and paste for",
- "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
- },
- "WinPrintData": {
- "label": "Print org data",
- "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
- },
- "WinReceiveData": {
- "label": "Receive data from",
- "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
- },
- "WinSendData": {
- "label": "Send org data to",
- "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
- },
- "Tap": {
- "numberOfDays": "Number of days",
- "pinResetAfterNumberOfDays": "PIN reset after number of days",
- "previousPinBlockCount": "Select number of previous PIN values to maintain"
- }
- },
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "One block action is required for all compliance policies.",
- "graceperiod": "Schedule (days after noncompliance)",
- "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
- "subtitle": "Specify action parameters",
- "title": "Action parameters"
- },
- "List": {
- "gracePeriodDay": "{0} day after noncompliance",
- "gracePeriodDays": "{0} days after noncompliance",
- "gracePeriodHour": "{0} hour after noncompliance",
- "gracePeriodHours": "{0} hours after noncompliance",
- "gracePeriodMinute": "{0} minute after noncompliance",
- "gracePeriodMinutes": "{0} minutes after noncompliance",
- "immediately": "Immediately",
- "schedule": "Schedule",
- "scheduleInfoBalloon": "Days after noncompliance",
- "subtitle": "Specify the sequence of actions on noncompliant devices",
- "title": "Actions"
- },
- "Notification": {
- "additionalEmailLabel": "Others",
- "additionalRecipients": "Additional recipients (via email)",
- "additionalRecipientsBladeTitle": "Select additional recipients",
- "emailAddressPrompt": "Enter email addresses (separated by commas)",
- "invalidEmail": "Invalid email address",
- "messageTemplate": "Message template",
- "noneSelected": "None selected",
- "notSelected": "Not selected",
- "numSelected": "{0} selected",
- "selected": "Selected"
- },
- "block": "Mark device noncompliant",
- "lockDevice": "Lock device (local action)",
- "lockDeviceWithPasscode": "Lock device (local action)",
- "noAction": "No action",
- "noActionRow": "No actions, select 'Add' to add an action",
- "pushNotification": "Send push notification to end user",
- "remoteLock": "Remotely lock the noncompliant device",
- "removeSourceAccessProfile": "Remove source access profile",
- "retire": "Add device to retire list",
- "wipe": "Wipe",
- "emailNotification": "Send email to end user"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "required": "Required",
- "uninstall": "Uninstall"
+ "HomepageURL": {
+ "header": "Managed homepage",
+ "title": "Homepage shortcut URL",
+ "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Redirect restricted sites to personal context",
+ "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
+ }
},
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Create custom script",
- "edit": "Edit custom script"
- },
- "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
- "customScriptCapitalized": "Custom script",
- "customScriptLowercase": "custom script",
- "detectionScript": "Detection script"
- },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home Sku",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Select the number of bits contained in the key.",
- "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
- "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
- "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
- "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Subject alternative name",
- "subjectNameFormat": "Subject name format",
- "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
- },
- "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
- "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
- "configurationSettingsFormat": "Configuration settings format text",
- "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
- "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
- "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
- "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Select runtime permissions for the associated app.",
- "policyAssociatedApp": "Select the app that this policy will be associated with.",
- "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
- "policyDescription": "Optionally, enter a description for this configuration policy.",
- "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
- "policyName": "Enter a name for this configuration policy.",
- "policyPlatform": "Select the platform this app configuration policy will apply to.",
- "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
- "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
- "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
- "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
- "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
- "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
- "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
- "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
- "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
- "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
- "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
- "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
- },
+ "Languages": {
+ "ar-aE": "Arabic (U.A.E.)",
+ "ar-bH": "Arabic (Bahrain)",
+ "ar-dZ": "Arabic (Algeria)",
+ "ar-eG": "Arabic (Egypt)",
+ "ar-iQ": "Arabic (Iraq)",
+ "ar-jO": "Arabic (Jordan)",
+ "ar-kW": "Arabic (Kuwait)",
+ "ar-lB": "Arabic (Lebanon)",
+ "ar-lY": "Arabic (Libya)",
+ "ar-mA": "Arabic (Morocco)",
+ "ar-oM": "Arabic (Oman)",
+ "ar-qA": "Arabic (Qatar)",
+ "ar-sA": "Arabic (Saudi Arabia)",
+ "ar-sY": "Arabic (Syria)",
+ "ar-tN": "Arabic (Tunisia)",
+ "ar-yE": "Arabic (Yemen)",
+ "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
+ "az-latn": "Azerbaijani (Latin, Azerbaijan)",
+ "bn-bD": "Bangla (Bangladesh)",
+ "bn-iN": "Bangla (India)",
+ "bs-cyrl": "Bosnian (Cyrillic)",
+ "bs-latn": "Bosnian (Latin)",
+ "zh-cN": "Chinese (PRC)",
+ "zh-hK": "Chinese (Hong Kong S.A.R.)",
+ "zh-mO": "Chinese (Macao S.A.R.)",
+ "zh-sG": "Chinese (Singapore)",
+ "zh-tW": "Chinese (Taiwan)",
+ "hr-bA": "Croatian (Latin)",
+ "hr-hR": "Croatian (Croatia)",
+ "nl-bE": "Dutch (Belgium)",
+ "nl-nL": "Dutch (Netherlands)",
+ "en-aU": "English (Australia)",
+ "en-bZ": "English (Belize)",
+ "en-cA": "English (Canada)",
+ "en-cabn": "English (Caribbean)",
+ "en-iE": "English (Ireland)",
+ "en-iN": "English (India)",
+ "en-jM": "English (Jamaica)",
+ "en-mY": "English (Malaysia)",
+ "en-nZ": "English (New Zealand)",
+ "en-pH": "English (Republic of the Philippines)",
+ "en-sG": "English (Singapore)",
+ "en-tT": "English (Trinidad and Tobago)",
+ "en-uK": "English (United Kingdom)",
+ "en-uS": "English (United States)",
+ "en-zA": "English (South Africa)",
+ "en-zW": "English (Zimbabwe)",
+ "fr-bE": "French (Belgium)",
+ "fr-cA": "French (Canada)",
+ "fr-cH": "French (Switzerland)",
+ "fr-fR": "French (France)",
+ "fr-lU": "French (Luxembourg)",
+ "fr-mC": "French (Monaco)",
+ "de-aT": "German (Austria)",
+ "de-cH": "German (Switzerland)",
+ "de-dE": "German (Germany)",
+ "de-lI": "German (Liechtenstein)",
+ "de-lU": "German (Luxembourg)",
+ "iu-cans": "Inuktitut (Syllabics, Canada)",
+ "iu-latn": "Inuktitut (Latin, Canada)",
+ "it-cH": "Italian (Switzerland)",
+ "it-iT": "Italian (Italy)",
+ "ms-bN": "Malay (Brunei Darussalam)",
+ "ms-mY": "Malay (Malaysia)",
+ "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
+ "mn-mN": "Mongolian (Cyrillic, Mongolia)",
+ "no-nB": "Norwegian, Bokmål (Norway)",
+ "no-nn": "Norwegian, Nynorsk (Norway)",
+ "pt-bR": "Portuguese (Brazil)",
+ "pt-pT": "Portuguese (Portugal)",
+ "quz-bO": "Quechua (Bolivia)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Peru)",
+ "smj-nO": "Sami, Lule (Norway)",
+ "smj-sE": "Sami, Lule (Sweden)",
+ "se-fI": "Sami, Northern (Finland)",
+ "se-nO": "Sami, Northern (Norway)",
+ "se-sE": "Sami, Northern (Sweden)",
+ "sma-nO": "Sami, Southern (Norway)",
+ "sma-sE": "Sami, Southern (Sweden)",
+ "smn": "Sami, Inari (Finland)",
+ "sms": "Sami, Skolt (Finland)",
+ "sr-Cyrl-bA": "Serbian (Cyrillic)",
+ "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
+ "sr-Latn-bA": "Serbian (Latin)",
+ "sr-Latn-rS": "Serbian (Latin, Serbia)",
+ "dsb": "Lower Sorbian (Germany)",
+ "hsb": "Upper Sorbian (Germany)",
+ "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
+ "es-aR": "Spanish (Argentina)",
+ "es-bO": "Spanish (Bolivia)",
+ "es-cL": "Spanish (Chile)",
+ "es-cO": "Spanish (Colombia)",
+ "es-cR": "Spanish (Costa Rica)",
+ "es-dO": "Spanish (Dominican Republic)",
+ "es-eC": "Spanish (Ecuador)",
+ "es-eS": "Spanish (Spain)",
+ "es-gT": "Spanish (Guatemala)",
+ "es-hN": "Spanish (Honduras)",
+ "es-mX": "Spanish (Mexico)",
+ "es-nI": "Spanish (Nicaragua)",
+ "es-pA": "Spanish (Panama)",
+ "es-pE": "Spanish (Peru)",
+ "es-pR": "Spanish (Puerto Rico)",
+ "es-pY": "Spanish (Paraguay)",
+ "es-sV": "Spanish (El Salvador)",
+ "es-uS": "Spanish (United States)",
+ "es-uY": "Spanish (Uruguay)",
+ "es-vE": "Spanish (Venezuela)",
+ "sv-fI": "Swedish (Finland)",
+ "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
+ "uz-latn": "Uzbek (Latin, Uzbekistan)",
+ "af": "Afrikaans (South Africa)",
+ "sq": "Albanian (Albania)",
+ "am": "Amharic (Ethiopia)",
+ "hy": "Armenian (Armenia)",
+ "as": "Assamese (India)",
+ "ba": "Bashkir (Russia)",
+ "eu": "Basque (Basque)",
+ "be": "Belarusian (Belarus)",
+ "br": "Breton (France)",
+ "bg": "Bulgarian (Bulgaria)",
+ "ca": "Catalan (Catalan)",
+ "co": "Corsican (France)",
+ "cs": "Czech (Czech Republic)",
+ "da": "Danish (Denmark)",
+ "dv": "Divehi (Maldives)",
+ "et": "Estonian (Estonia)",
+ "fo": "Faroese (Faroe Islands)",
+ "fil": "Filipino (Philippines)",
+ "fi": "Finnish (Finland)",
+ "gl": "Galician (Galician)",
+ "ka": "Georgian (Georgia)",
+ "el": "Greek (Greece)",
+ "gu": "Gujarati (India)",
+ "ha": "Hausa (Latin, Nigeria)",
+ "he": "Hebrew (Israel)",
+ "hi": "Hindi (India)",
+ "hu": "Hungarian (Hungary)",
+ "is": "Icelandic (Iceland)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonesian (Indonesia)",
+ "ga": "Irish (Ireland)",
+ "xh": "isiXhosa (South Africa)",
+ "zu": "isiZulu (South Africa)",
+ "ja": "Japanese (Japan)",
+ "kn": "Kannada (India)",
+ "kk": "Kazakh (Kazakhstan)",
+ "km": "Khmer (Cambodia)",
+ "rw": "Kinyarwanda (Rwanda)",
+ "sw": "Kiswahili (Kenya)",
+ "kok": "Konkani (India)",
+ "ko": "Korean (Korea)",
+ "ky": "Kyrgyz (Kyrgyzstan)",
+ "lo": "Lao (Lao P.D.R.)",
+ "lv": "Latvian (Latvia)",
+ "lt": "Lithuanian (Lithuania)",
+ "lb": "Luxembourgish (Luxembourg)",
+ "mk": "Macedonian (North Macedonia)",
+ "ml": "Malayalam (India)",
+ "mt": "Maltese (Malta)",
+ "mi": "Maori (New Zealand)",
+ "mr": "Marathi (India)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepali (Nepal)",
+ "oc": "Occitan (France)",
+ "or": "Odia (India)",
+ "ps": "Pashto (Afghanistan)",
+ "fa": "Persian",
+ "pl": "Polish (Poland)",
+ "pa": "Punjabi (India)",
+ "ro": "Romanian (Romania)",
+ "rm": "Romansh (Switzerland)",
+ "ru": "Russian (Russia)",
+ "sa": "Sanskrit (India)",
+ "st": "Sesotho sa Leboa (South Africa)",
+ "tn": "Setswana (South Africa)",
+ "si": "Sinhala (Sri Lanka)",
+ "sk": "Slovak (Slovakia)",
+ "sl": "Slovenian (Slovenia)",
+ "sv": "Swedish (Sweden)",
+ "syr": "Syriac (Syria)",
+ "tg": "Tajik (Cyrillic, Tajikistan)",
+ "ta": "Tamil (India)",
+ "tt": "Tatar (Russia)",
+ "te": "Telugu (India)",
+ "th": "Thai (Thailand)",
+ "bo": "Tibetan (PRC)",
+ "tr": "Turkish (Turkey)",
+ "tk": "Turkmen (Turkmenistan)",
+ "uk": "Ukrainian (Ukraine)",
+ "ur": "Urdu (Islamic Republic of Pakistan)",
+ "vi": "Vietnamese (Vietnam)",
+ "cy": "Welsh (United Kingdom)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (PRC)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Built-in Role",
+ "customCloudPCRole": "Custom Windows 365 role",
+ "customIntuneRole": "Custom Intune role",
+ "customRole": "Custom Role"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "App Version",
+ "dependencyName": "Dependency name",
+ "lastModifiedTime": "Last modified time",
+ "relationship": "Relationship",
+ "replaced": "Replaced",
+ "searchPlaceholder": "Filter by app name",
+ "status": "Status details",
+ "statusDetails": "Status",
+ "supersedenceName": "Supersedence name"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Child dependency",
+ "indirectSupersedence": "Not directly related",
+ "supersedenceAncestors": "Superseding",
+ "supersedenceDescendants": "Superseded"
+ },
+ "SupersededReplaced": {
+ "no": "No",
+ "yes": "Yes"
+ },
+ "Tabs": {
+ "chart": "Chart",
+ "dependency": "Dependency",
+ "label": "View: ",
+ "supersedence": "Supersedence",
+ "table": "Table"
+ },
+ "dependencyGraphAriaLabel": "App dependency chart",
+ "supersedenceGraphAriaLabel": "App supersedence chart"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Number of days to wait before restart is enforced"
+ },
+ "Description": {
+ "label": "Description"
+ },
+ "Name": {
+ "label": "Name"
+ },
+ "QualityUpdateRelease": {
+ "label": "Expedite installation of quality updates if device OS version less than:"
+ },
+ "bladeTitle": "Quality updates Windows 10 and later (preview)",
+ "loadError": "Loading failed!"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Settings"
+ },
+ "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
+ "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
+ "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ },
+ "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
+ "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
+ "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
+ "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
+ "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
+ "appSharingToLevel3": "{0}: Allow sending org data to any app",
+ "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
+ "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
+ "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
+ "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
+ "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
+ "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
+ "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
+ "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
+ "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
+ "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
+ "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
+ "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
+ "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
+ "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
+ "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
+ "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
+ "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
+ "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
+ "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
+ "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
+ "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
+ "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
+ "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
+ "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
+ "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
+ "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
+ "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
+ "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
+ "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
+ "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
+ "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
+ "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
+ "checkInput": "Check input for validity",
+ "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
+ "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
+ "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
+ "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
+ "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
+ "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
+ "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
+ "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
+ "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
+ "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
+ "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
+ "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
+ "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
+ "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
+ "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
+ "name": "The name of this network boundary",
+ "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
+ "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
+ "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
+ "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
+ "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
+ "protectUnderLock": "Protects app content while the device is in a locked state.",
+ "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
+ "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
+ "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
+ "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
+ "required": "Required",
+ "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
+ "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
+ "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
+ "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
+ "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ },
+ "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Create custom script",
+ "edit": "Edit custom script"
+ },
+ "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
+ "customScriptCapitalized": "Custom script",
+ "customScriptLowercase": "custom script",
+ "detectionScript": "Detection script"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Default",
+ "header": "Update Priority",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Auto-update",
+ "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Allow user to snooze the restart notification",
+ "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
+ "durationInMinutes": "Device restart grace period (minutes)",
+ "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Time zone",
+ "local": "Device time zone",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Date and time",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
+ "deadlineTimeLabel": "App installation deadline",
+ "defaultTime": "As soon as possible",
+ "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
+ "specificTime": "A specific date and time",
+ "startTimeColumnLabel": "Availability",
+ "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
+ "startTimeLabel": "App availability"
+ },
+ "restartGracePeriodHeader": "Restart grace period",
+ "restartGracePeriodLabel": "Device restart grace period",
+ "summaryTitle": "End user experience"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Assign custom attribute to at least one group. Go to Properties to edit assignments.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Shell script",
"successfullySavedPolicy": "Saved {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64-bit",
+ "thirtyTwoBit": "32-bit"
+ },
+ "Countries": {
+ "ae": "United Arab Emirates",
+ "ag": "Antigua and Barbuda",
+ "ai": "Anguilla",
+ "al": "Albania",
+ "am": "Armenia",
+ "ao": "Angola",
+ "ar": "Argentina",
+ "at": "Austria",
+ "au": "Australia",
+ "az": "Azerbaijan",
+ "bb": "Barbados",
+ "be": "Belgium",
+ "bf": "Burkina Faso",
+ "bg": "Bulgaria",
+ "bh": "Bahrain",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolivia",
+ "br": "Brazil",
+ "bs": "Bahamas",
+ "bt": "Bhutan",
+ "bw": "Botswana",
+ "by": "Belarus",
+ "bz": "Belize",
+ "ca": "Canada",
+ "cg": "Republic Of Congo",
+ "ch": "Switzerland",
+ "cl": "Chile",
+ "cn": "China",
+ "co": "Colombia",
+ "cr": "Costa Rica",
+ "cv": "Cape Verde",
+ "cy": "Cyprus",
+ "cz": "Czech Republic",
+ "de": "Germany",
+ "dk": "Denmark",
+ "dm": "Dominica",
+ "do": "Dominican Republic",
+ "dz": "Algeria",
+ "ec": "Ecuador",
+ "ee": "Estonia",
+ "eg": "Egypt",
+ "es": "Spain",
+ "fi": "Finland",
+ "fj": "Fiji",
+ "fm": "Federated States Of Micronesia",
+ "fr": "France",
+ "gb": "United Kingdom",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Greece",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hong Kong",
+ "hn": "Honduras",
+ "hr": "Croatia",
+ "hu": "Hungary",
+ "id": "Indonesia",
+ "ie": "Ireland",
+ "il": "Israel",
+ "in": "India",
+ "is": "Iceland",
+ "it": "Italy",
+ "jm": "Jamaica",
+ "jo": "Jordan",
+ "jp": "Japan",
+ "ke": "Kenya",
+ "kg": "Kyrgyzstan",
+ "kh": "Cambodia",
+ "kn": "St. Kitts and Nevis",
+ "kr": "Republic Of Korea",
+ "kw": "Kuwait",
+ "ky": "Cayman Islands",
+ "kz": "Kazakstan",
+ "la": "Lao People’s Democratic Republic",
+ "lb": "Lebanon",
+ "lc": "St. Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Lithuania",
+ "lu": "Luxembourg",
+ "lv": "Latvia",
+ "md": "Republic Of Moldova",
+ "mg": "Madagascar",
+ "mk": "North Macedonia",
+ "ml": "Mali",
+ "mn": "Mongolia",
+ "mo": "Macau",
+ "mr": "Mauritania",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Mexico",
+ "my": "Malaysia",
+ "mz": "Mozambique",
+ "na": "Namibia",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Netherlands",
+ "no": "Norway",
+ "np": "Nepal",
+ "nz": "New Zealand",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua New Guinea",
+ "ph": "Philippines",
+ "pk": "Pakistan",
+ "pl": "Poland",
+ "pt": "Portugal",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Romania",
+ "ru": "Russia",
+ "sa": "Saudi Arabia",
+ "sb": "Solomon Islands",
+ "sc": "Seychelles",
+ "se": "Sweden",
+ "sg": "Singapore",
+ "si": "Slovenia",
+ "sk": "Slovakia",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Suriname",
+ "st": "Sao Tome and Principe",
+ "sv": "El Salvador",
+ "sz": "Swaziland",
+ "tc": "Turks and Caicos",
+ "td": "Chad",
+ "th": "Thailand",
+ "tj": "Tajikistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunisia",
+ "tr": "Turkey",
+ "tt": "Trinidad and Tobago",
+ "tw": "Taiwan",
+ "tz": "Tanzania",
+ "ua": "Ukraine",
+ "ug": "Uganda",
+ "us": "United States",
+ "uy": "Uruguay",
+ "uz": "Uzbekistan",
+ "vc": "St. Vincent and The Grenadines",
+ "ve": "Venezuela",
+ "vg": "British Virgin Islands",
+ "vn": "Vietnam",
+ "ye": "Yemen",
+ "za": "South Africa",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "This setting is not configurable via OMA-URI, as it is available in the settings catalog. Please navigate to the settings catalog to configure this setting."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Select a configuration profile file"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "These settings work for devices that were enrolled with or without user approval through device enrollment, and for devices enrolled with automated device enrollment (formerly DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Device enrollment and automated device enrollment",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Device enrollment and automated device enrollment",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
+ "deviceExperienceTypeDescription": "Based on the experience you want to configure, select Kiosk Mode or Microsoft Launcher to start configuring the experience on your devices. If you don't select a device experience type, users will see the device's default home screen experience.",
+ "deviceExperienceTypeKioskMode": "Kiosk mode (dedicated and fully managed)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft launcher (fully managed only)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Show",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
+ "deviceExperienceTypeName": "Device experience type",
"deviceGuardCredentialGuardDescription": "Enabling with UEFI lock ensures that Credential Guard cannot be remotely disabled. Enabling without UEFI lock allows Credential Guard to be disabled remotely via Group Policy.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune Device ID",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Number of days before transitioning from Auto Restarts scheduled outside of active hours to Engaged Restart, which requires the user to schedule.",
"engagedRestartTransitionScheduleName": "Transition users to engaged restart after an auto-restart (days)",
"enhancedOption": "Enhanced (1903 and earlier)",
- "enrollmentProfileTypeDedicatedDevice": "Dedicated device",
- "enrollmentProfileTypeDescription": "Select an enrollment profile type to start configuring Microsoft Launcher or Microsoft Managed Home Screen on your devices. If you don't select a profile type, users will see the device's default home screen experience.",
- "enrollmentProfileTypeFullyManaged": "Fully managed",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Show",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
- "enrollmentProfileTypeName": "Enrollment profile type",
"enrollmentSettingsHeading": "Enrollment Settings",
"enterOnlyOneForDns": "Enter a list of DNS servers and/or a proxy server.",
"enterpriseModeLoggingExample": "e.g. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Fully managed and corporate-owned work profile devices",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "These settings only work for fully managed and dedicated devices.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Fully managed and dedicated devices",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "These settings only work for fully managed and dedicated devices operating with a kiosk policy.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Fully managed and dedicated devices (kiosk mode only)",
"gameCenterBlockedMacDescription": "Yes disables Game Center, and the Game Center icon is removed from the Home screen. Available for devices running macOS versions 10.13 or later.",
"gameCenterBlockedMacName": "Block Game Center",
"gamingPageDescription": "Block access to Gaming in Settings app.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Configures the logon type to access the applications on this kiosk device.",
"kioskShowTaskbarDesc": "Show or hide the Windows taskbar on the kiosk.",
"kioskShowTaskbarName": "Windows Taskbar",
+ "kioskSingleInfoBoxText": "Single app kiosk mode – Locks the device to run the selected app. To use this mode, you must first approve and assign the selected app from the client apps workload. On fully managed devices, the only selected app that will apply is Managed Home Screen. All other apps will be treated as a required app instead.",
"kioskStartDateTime": "Maintenance Window Start Time",
"kioskStartMenuLayoutXmlDesc": "Provide an XML layout that defines in what order apps should be displayed on the Start Menu",
"kioskStartMenuLayoutXmlDescV2": "Importing an XML file configuring the Start layout overrides the existing display order and tile size selections. Learn more",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Must be a valid file path",
"mustBeAValidHttpsUrl": "Must be a valid https url",
"mustBeAValidIPAddress": "Must be a valid IP address (e.g. 192.168.0.1 or 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Value must be a valid IP address or FQDN with optional port number.",
"mustBeAValidIPv4Address": "Must be a valid IPv4 address (e.g. 192.168.0.1)",
"mustBeAValidIPv6Address": "Must be a valid IPv6 address (e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Must be a valid image URL such as www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Windows Firewall rules from the local store (Public networks)",
"publicNetworkName": "Public (non-discoverable) network",
"publicOutboundConnectionsSummaryLabel": "Default action for outbound connections (Public networks)",
- "publicPlayStoreEnabledDescription": "Users get access to all apps, except the ones you’ve required uninstall in Client Apps. If you choose \"Not configured\" for this setting, users can only access the apps you’ve listed as available or required in Client Apps.",
+ "publicPlayStoreEnabledDescription": "If you select \"Allow\", users get access to all apps, except the ones you've required uninstall in Client Apps. If you choose \"Block\" or \"Not configured\" for this setting, users can only access the apps you've listed as available or required in Client Apps.",
"publicPlayStoreEnabledName": "Allow access to all apps in Google Play store",
- "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Not configured\", all apps not explicitly allowed for the user will be removed from the device.",
+ "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Block\" or \"Not configured\", all apps will be removed from the device, except apps you've listed as available or required in Client Apps.",
+ "publicPlayStoreSelectionAllowList": "Block",
+ "publicPlayStoreSelectionBlockList": "Allow",
+ "publicPlayStoreSelectionNotConfigured": "Not configured",
"publicShieldedSummaryLabel": "Shielded (Public networks)",
"publicStealthModeSummaryLabel": "Stealth mode (Public networks)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Unicast responses to multicast broadcasts (Public networks)",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Device",
"licenseTypeUser": "User"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Property",
- "rule": "Rule",
- "ruleDetails": "Rule Details",
- "value": "Value"
- },
- "assignIf": "Assign profile if",
- "deleteWarning": "This will delete the selected Applicability Rule",
- "dontAssignIf": "Don't assign profile if",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "and {0} more",
- "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
- "maxText": "Max",
- "minText": "Min",
- "noActionRow": "No Applicability Rules Specified",
- "oSVersion": "e.g. 1.2.3.4",
- "toText": "to",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "OS edition",
- "windows10OsVersion": "OS version",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Equals",
- "greaterThan": "Greater than",
- "greaterThanOrEqualTo": "Greater than or equal to",
- "lessThan": "Less than",
- "lessThanOrEqualTo": "Less than or equal to",
- "notEqualTo": "Not equal to"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Enforce script signature check and run script silently",
- "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
- "header": "Use a custom detection script",
- "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
- "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileNotSelectedValidation": "No script file is selected.",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
- "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Date created",
- "dateModified": "Date modified",
- "doesNotExist": "File or folder does not exist",
- "fileOrFolderExists": "File or folder exists",
- "sizeInMB": "Size in MB",
- "version": "String (version)"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "fileOrFolder": "File or folder",
- "fileOrFolderToolTip": "The file or folder to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "path": "Path",
- "pathTooltip": "The full path of the folder containing the file or folder to detect.",
- "value": "Value",
- "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
- },
- "GridColumns": {
- "pathOrCode": "Path/Code",
- "type": "Type"
- },
- "MsiRule": {
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
- "productCode": "MSI product code",
- "productCodeTooltip": "A valid MSI product code for the app.",
- "productVersion": "Value",
- "productVersionCheck": "MSI product version check",
- "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
- "productVersionTooltip": "Enter the MSI product version for the app."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Integer comparison",
- "keyDoesNotExist": "Key does not exist",
- "keyExists": "Key exists",
- "stringComparison": "String comparison",
- "valueDoesNotExist": "Value does not exist",
- "valueExists": "Value exists",
- "versionComparison": "Version comparison"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "value": "Value",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the registry value to detect.",
- "valueTooltip": "Select a value that matches the selected detection method."
- },
- "RuleTypeOptions": {
- "file": "File",
- "mSI": "MSI",
- "registry": "Registry"
- },
- "gridAriaLabel": "Detection Rules",
- "header": "Create a rule that indicates the presence of the app.",
- "noRulesSelectedPlaceholder": "No rules are specified.",
- "ruleTableLimit": "You can add up to 25 detection rules",
- "ruleType": "Rule type",
- "ruleTypeTooltip": "Choose the type of detection rule to add."
- },
- "RuleConfigurationOptions": {
- "customScript": "Use a custom detection script",
- "manual": "Manually configure detection rules"
- },
- "bladeTitle": "Detection rules",
- "header": "Configure app specific rules used to detect the presence of the app.",
- "rulesFormat": "Rules format",
- "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
- "selectorLabel": "Detection rules"
+ "BooleanActions": {
+ "allow": "Allow",
+ "block": "Block",
+ "configured": "Configured",
+ "disable": "Disable",
+ "dontRequire": "Don't Require",
+ "enable": "Enable",
+ "hide": "Hide",
+ "limit": "Limit",
+ "notConfigured": "Not configured",
+ "require": "Require",
+ "show": "Show",
+ "yes": "Yes"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Endpoint detection and response"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "App and browser isolation",
- "aSRApplicationControl": "Application control",
- "aSRAttackSurfaceReduction": "Attack surface reduction rules",
- "aSRDeviceControl": "Device control",
- "aSRExploitProtection": "Exploit protection",
- "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
- "aVExclusions": "Microsoft Defender Antivirus exclusions",
- "antivirus": "Microsoft Defender Antivirus",
- "cloudPC": "Windows 365 Security Baseline",
- "default": "Endpoint Security",
- "defenderTest": "Microsoft Defender for Endpoint demo",
- "diskEncryption": "BitLocker",
- "eDR": "Endpoint detection and response",
- "edgeSecurityBaseline": "Microsoft Edge baseline",
- "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
- "editionUpgradeConfiguration": "Edition upgrade and mode switch",
- "firewall": "Windows Firewall",
- "firewallRules": "Windows Firewall rules",
- "identityProtection": "Account protection",
- "identityProtectionPreview": "Account protection (preview)",
- "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
- "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
- "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
- "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS firewall",
- "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
- "office365Baseline": "Microsoft Office O365 baseline",
- "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
- "securityBaselines": "Security Baselines",
- "test": "Test Template",
- "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
- "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
- "windowsSecurityExperience": "Windows Security experience"
- },
- "Firewall": {
- "mDE": "Windows Firewall"
- },
- "FirewallRules": {
- "mDE": "Windows Firewall Rules"
- },
- "OneDriveKnownFolderMove": {
- "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Account Protection",
- "administrativeTemplates": "Administrative Templates",
- "androidCompliancePolicy": "Android compliance policy",
- "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
- "applicationControl": "App Control for Business",
- "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
- "bitlocker": "BitLocker",
- "custom": "Custom",
- "deliveryOptimization": "Delivery Optimization",
- "derivedPersonalIdentityVerificationCredential": "Derived credential",
- "deviceControl": "Device Control",
- "deviceFeatures": "Device features",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Device Lock",
- "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
- "deviceRestrictions": "Device restrictions",
- "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
- "domainJoinPreview": "Domain Join",
- "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
- "education": "Education",
- "email": "Email",
- "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
- "endpointProtection": "Endpoint protection",
- "expeditedCheckin": "Mobile device management configuration",
- "exploitProtection": "Exploit Protection",
- "extensions": "Extensions",
- "hardwareConfigurations": "BIOS Configurations and other settings",
- "identityProtection": "Identity protection",
- "iosCompliancePolicy": "iOS compliance policy",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Local user group membership",
- "macCompliancePolicy": "Mac compliance policy",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
- "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
- "microsoftDefenderFirewallRules": "Windows Firewall Rules",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
- "mxProfileZebraOnly": "MX profile (Zebra only)",
- "networkBoundary": "Network boundary",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Override Group Policy",
- "pkcsCertificate": "PKCS certificate",
- "pkcsImportedCertificate": "PKCS imported certificate",
- "preferenceFile": "Preference file",
- "presets": "Presets",
- "scepCertificate": "SCEP certificate",
- "secureAssessmentEducation": "Secure assessment (Education)",
- "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
- "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
- "settingsCatalog": "Settings Catalog",
- "sharedMultiUserDevice": "Shared multi-user device",
- "softwareUpdates": "Software Updates",
- "trustedCertificate": "Trusted certificate",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi import",
- "windows10CompliancePolicy": "Windows 10/11 compliance policy",
- "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
- "windows10XScep": "SCEP certificate - TEST",
- "windows10XTrustedCertificate": "Trusted certificate - TEST",
- "windows10XVPN": "VPN - TEST",
- "windows10XWifi": "WIFI - TEST",
- "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
- "windows365SecurityBaseline": "Windows 365 Security Baseline",
- "windows8CompliancePolicy": "Windows 8 compliance policy",
- "windowsHealthMonitoring": "Windows health monitoring",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
- "windowsUpdateforBusiness": "Windows Update for Business",
- "wiredNetwork": "Wired network",
- "workProfile": "Personally-owned work profile"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Make update available gradually",
- "immediateStart": "Make update available as soon as possible",
- "startDateOnly": "Make update available on a specific date"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Managed devices",
- "devicesWithoutEnrollment": "Managed apps"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filter",
- "assignmentFilterTypeColumnHeader": "Filter mode",
- "assignmentToast": "End user notifications",
- "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
- "autoUpdate": "Auto-update",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
- "groupTableHeader": "Group",
- "installContextLabel": "Install Context",
- "isRemovable": "Install as removable",
- "licenseTypeLabel": "License type",
- "modeTableHeader": "Group mode",
- "policySet": "Policy Set",
- "preventAutoAppUpdate": "Prevent automatic app updates",
- "preventManagedAppBackup": "Prevent iCloud app backup",
- "restartGracePeriodHeader": "Restart grace period",
- "startTimeColumnLabel": "Availability",
- "tracks": "Tracks",
- "uninstallOnRemoval": "Uninstall on device removal",
- "updateMode": "Update Priority",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD web app",
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office Suite",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeAddIn": "Office add-in",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "sharePointApp": "SharePoint app",
- "teamsApp": "Teams app",
- "webApp": "Web link",
- "win32CatalogApp": "Windows catalog app (Win32)",
- "winGetPublicApp": "Windows Package Manager Community Repository",
- "winGetStoreApp": "Microsoft Store app (new)",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "AssignmentToast": {
- "hideAll": "Hide all toast notifications",
- "showAll": "Show all toast notifications",
- "showReboot": "Show toast notifications for computer restarts"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Yes",
- "notConfigured": "No"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "App install may force a device restart",
- "basedOnReturnCode": "Determine behavior based on return codes",
- "force": "Intune will force a mandatory device restart",
- "suppress": "No specific action"
- },
- "FilterType": {
- "exclude": "Exclude",
- "include": "Include",
- "none": "None"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "notApplicable": "Not applicable",
- "required": "Required",
- "uninstall": "Uninstall"
- },
- "SettingType": {
- "assignmentType": "Assignment type",
- "deviceLicensing": "License type",
- "installContext": "Uninstall on device removal",
- "toastSettings": "End user notifications",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Default",
- "postponed": "Postponed",
- "priority": "High Priority"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Configure devices for initial provisioning.",
- "title": "Device preparation"
- },
- "EnrollmentSettings": {
- "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
- "title": "Enrollment settings"
- },
- "OSConfiguration": {
- "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
- "menuTitle": "Windows operating system recovery configuration"
- },
- "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
- "coManagementAuthorityTitle": "Co-management Settings ",
- "deploymentProfiles": "Windows Autopilot deployment profiles",
- "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
- "descriptionLabel": "Windows enrollment methods",
- "enrollmentStatusPage": "Enrollment Status Page"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Automatically approve all recommended driver updates",
- "manual": "Manually approve and deploy driver updates"
- },
- "BulkActions": {
- "button": "Bulk actions"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Approval method:"
- },
- "DeploymentDeferralInDays": {
- "label": "Make updates available after",
- "units": "(days)",
- "value": "{0} days"
- },
- "DriverAction": {
- "header": "Select an action below.",
- "label": "Driver action",
- "placeholder": "Select an action"
- },
- "IncludedDrivers": {
- "label": "Included drivers"
- },
- "SelectDrivers": {
- "header": "Select drivers to include in your bulk action"
- },
- "SelectDriversToInclude": {
- "button": "Select drivers to include"
- },
- "SelectLessDrivers": {
- "validation": "At most one hundred drivers can be selected"
- },
- "SelectMoreDrivers": {
- "validation": "At least one driver should be selected"
- },
- "SelectedDrivers": {
- "label": "Selected drivers"
- },
- "availabilityDate": "Make available in Windows Update",
- "bladeTitle": "Driver updates Windows 10 and later (preview)",
- "lastSync": "Last sync:",
- "lastSyncDefaultText": "Pending initial inventory collection",
- "loadError": "Loading failed!"
- },
- "DriverStatus": {
- "approved": "Approved",
- "declined": "Declined",
- "export": "Exporting recommended drivers",
- "needsReview": "Needs review",
- "paused": "Paused"
- },
- "DriversToReview": {
- "text": "{0} to review"
- },
- "Subtitle": {
- "automatic": "Automatic approval driver update policy",
- "manual": "Manual approval driver update policy"
- },
- "SyncNotification": {
- "failure": "Unable to sync {0}",
- "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
- "pending": "{0} sync in progress",
- "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
- "success": "{0} sync complete",
- "successDescription": "Sync with WUfB service completed at {0}"
- },
- "SyncSpinner": {
- "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
- },
- "TabName": {
- "basics": "Basics",
- "driverUpdateSettings": "Settings",
- "otherDrivers": "Other drivers",
- "properties": "Properties",
- "recommendedDrivers": "Recommended drivers"
- },
- "driverAddFilter": "Add filter",
- "driverApplicableDevices": "Applicable devices",
- "driverApprovalStatus": "Status",
- "driverBulkActions": "Bulk actions",
- "driverClass": "Driver class",
- "driverCount": "Showing {0} to {1} of {2} records",
- "driverFilterNoneSelected": "None selected",
- "driverManufacturer": "Manufacturer",
- "driverName": "Driver name",
- "driverNameLower": "windows driver update deployment",
- "driverNameUpper": "Windows driver update deployment",
- "driverRefresh": "Refresh",
- "driverReleaseDate": "Release date",
- "driverSearch": "Search",
- "driverSearchKeyword": "Enter search keyword",
- "driverVersion": "Version",
- "firstDeploymentDate": "First Deployment",
- "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
- "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
- "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
- "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
- "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
- "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
- "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
- "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
- "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
- "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
- "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
- "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
- "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
- "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
- "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
- "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
- "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
- "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
- "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
- "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
- "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
- },
- "Inputs": {
- "accountDomain": "Account domain",
- "accountDomainHint": "e.g. contosodomain",
- "accountDomainInfoBalloon": "Specify the user’s account domain.",
- "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
- "allowContactSetting": "Allow user to change contact setting",
- "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
- "allowUserChange": "Allow user to change setting",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
- "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "App install context",
- "appUrlLabel": "Appstore URL",
- "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Applicable device type",
- "assignmentActionLabel": "Mode",
- "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
- "authenticationMetod": "Authentication method",
- "authenticationType": "Authentication type",
- "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
- "availableLicenseCount": "Available licenses",
- "basicAuth": "Basic authentication",
- "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
- "bookNameLabel": "Book name",
- "bundleDescriptionHint": "Enter a description that describes the apps included.",
- "calendar": "Calendar",
- "categoryLabel": "Category",
- "categoryNameLabel": "Default name",
- "certProfileType": "Certificate profile type",
- "certificate": "Certificate",
- "certificates": "Certificates",
- "commandLineLabel": "Command-line arguments",
- "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
- "configurationSettingsFormatLabel": "Configuration settings format",
- "configurationSettingsLabel": "Settings format",
- "contactSync": "Save Contacts",
- "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
- "contacts": "Contacts",
- "createdDateTime": "Created",
- "defaultCategoryHint": "Default categories cannot be changed",
- "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
- "descriptionGenericLabel": "Description",
- "descriptionHint": "Enter a description...",
- "descriptionLabel": "Description",
- "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
- "developerLabel": "Developer",
- "developerSizeHint": "The maximum length of the developer name is 256 characters.",
- "disable": "Disable",
- "disabled": "Disabled",
- "displayNameLabel": "Name",
- "displayVersionHint": "Enter the app version",
- "displayVersionLabel": "App Version",
- "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
- "eBookCategoryNameLabel": "Default name",
- "emailAccount": "Email account name",
- "emailAccountHint": "e.g. Corporate Email",
- "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
- "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
- "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
- "emailServer": "Email Server",
- "emailServerHint": "e.g. mail.contoso.com",
- "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
- "enable": "Enable",
- "enableSMime": "Enable S/MIME",
- "enabled": "Enabled",
- "encryptAllEmails": "Encrypt all emails",
- "encryptionCertificates": "Encryption certificates",
- "endUserNotifications": "End-user notifications",
- "enrollmentTypeLabel": "Device enrollment type",
- "externalRecipients": "External recipients MailTip",
- "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
- "focusedInbox": "Focused Inbox",
- "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
- "fullScreenEnabledLabel": "Full screen",
- "gmailNineAmountOfEmail": "Amount of email to synchronize",
- "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
- "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
- "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
- "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
- "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
- "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
- "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
- "ignoreManifestScope": "Ignore manifest scope",
- "ignoreVersionDetection": "Ignore app version",
- "informationUrlLabel": "Information URL",
- "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
- "installAsManaged": "Install as managed",
- "installationSourceLabel": "App type",
- "installerTypeInfoBalloon": "The installer type of the application package.",
- "installerTypeLabel": "Installer Type",
- "isFeatured": "Show this as a featured app in the Company Portal",
- "isMAMEnabledToggleLabel": "Yes",
- "lastModifiedDateTime": "Last updated Time",
- "ldapUrl": "LDAP URL",
- "licensingType": "Supports device context assignment",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimum operating system",
- "modernAuth": "Modern authentication",
- "nameHint": "Enter a name",
- "nameLabel": "Name",
- "nameSizeHint": "The maximum length of the name is 512 characters.",
- "notConfigured": "Not configured",
- "notesLabel": "Notes",
- "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
- "notificationType": "Notification type",
- "oneDay": "One Day",
- "oneMonth": "One Month",
- "oneWeek": "One Week",
- "outlookSMimeSettings": "Outlook S/MIME settings",
- "ownerLabel": "Owner",
- "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
- "packageIdLabel": "Package Identifier",
- "packageNameLabel": "Package name",
- "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
- "platformLabel": "Platform",
- "policyDescriptionLabel": "Description",
- "policyNameLabel": "Name",
- "preComposedIconEnabled": "Precomposed",
- "primarySMTPAddress": "Primary SMTP Address",
- "privacyUrlLabel": "Privacy URL",
- "publisherHint": "Enter a publisher name",
- "publisherLabel": "Publisher",
- "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
- "require": "Require",
- "requireBiometrics": "Require Biometrics to access app",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "At least one scope tag is required",
- "searchAppLabel": "Select app",
- "searchAppLinkText": "Search the App Store",
- "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
- "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
- "selectAAD": "Select a Microsoft Entra attribute",
- "selectAppFileLabel": "Select file",
- "selectAppFileLinkText": "Select app package file",
- "selectAppFileToUpdateLabel": "Select file to update",
- "selectAuthMethod": "Select an authentication method",
- "selectAuthType": "Select an authentication type",
- "selectCatalogAppLabel": "Select app",
- "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
- "selectCertificate": "Select a certificate",
- "signAllEmails": "Sign all emails",
- "signingCertificates": "Signing certificates",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Suite Description",
- "suiteNameLabel": "Suite Name",
- "targetApplicationBundleIdentifier": "Target application bundle identifier",
- "targetedPlatformsLabel": "Targeted platform",
- "tasks": "Tasks",
- "threeDays": "Three Days",
- "totalLicenseCount": "Total licenses",
- "twoWeeks": "Two Weeks",
- "unifiedAssignmentsLabel": "Assign to:",
- "unlimited": "Unlimited",
- "urlHint": "Enter a valid url",
- "useManagedBrowserHint": "Android and iOS only. Learn more",
- "useManagedBrowserLabel": "Require a managed browser to open this link",
- "userPrinicipalName": "User Principal Name",
- "username": "Username",
- "usernameAttribute": "Username attribute from Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
- "usernamePassword": "Username and password",
- "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
- "webAppUrlLabel": "App URL",
- "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
- "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "XML Data Entered",
- "xmlFormatInvalid": "XML policy format is invalid.",
- "xmlTooLarge": "Input size must be less than 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Failed to delete {0}",
- "failureCa": "Failed to delete {0} because it is referenced by CA policies",
- "modifying": "Deleting {0}",
- "success": "Successfully deleted {0}"
- },
- "Notify": {
- "failure": "Failed to update {0}",
- "modifying": "Modifying {0}",
- "success": "Successfully updated {0}"
- },
- "menuLabel": "Authentication context"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
- "certificate": "Certificate authentication",
- "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
- "multifactor": "Multifactor authentication",
- "require": "Require federated authentication method (Preview)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
- },
- "Option": {
- "always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
- "label": "Persistent browser session",
- "never": "Never persistent"
- },
- "Warning": {
- "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Hours or days",
- "value": "Frequency"
- },
- "Option": {
- "Day": {
- "plural": "{0} days",
- "singular": "1 day"
- },
- "Hour": {
- "plural": "{0} hours",
- "singular": "1 hour"
- },
- "daysOption": "Days",
- "everytime": "Every time",
- "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
- "hoursOption": "Hours",
- "label": "Sign-in frequency",
- "placeholder": "Select units"
- }
- },
- "mainOption": "Modify session lifetime",
- "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
- },
- "SingleSelectorActive": {
- "failed": "Unable to load this data.",
- "reattempt": "Loading data. Reattempt {0} of {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Choose directory roles"
- },
- "Excluded": {
- "gridAria": "List of excluded users"
- },
- "Included": {
- "gridAria": "List of included users"
- },
- "Validation": {
- "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
- "customRoleSelected": "At least one custom role is selected",
- "failed": "\"{0}\" must be configured",
- "roles": "Select at least one role",
- "usersGroups": "Select at least one user or group"
- },
- "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
- },
- "advancedTabText": "Advanced",
- "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
- "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
- "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
- "allDayCheckboxLabel": "All day",
- "allDevicePlatforms": "Any device",
- "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
- "allGuestUserLabel": "All guest and external users",
- "allRiskLevelsOption": "All risk levels",
- "allTrustedLocationLabel": "All trusted locations",
- "allUserGroupSetSelectorLabel": "All users and groups selected",
- "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
- "allUsersString": "All users",
- "and": "{0} AND {1} ",
- "andWithGrouping": "({0}) AND {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Any cloud app",
- "appContextOptionInfoContent": "Requested authentication tag",
- "appContextOptionLabel": "Requested authentication tag (Preview)",
- "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
- "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
- "appNotSetSeletorLabel": "0 cloud apps selected",
- "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
- "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
- "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
- "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
- "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
- "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
- "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
- "applyConditonLabel": "Configure",
- "ariaLabelPolicyDisabled": "Policy is disabled",
- "ariaLabelPolicyEnabled": "Policy is enabled",
- "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
- "blockAccess": "Block access",
- "builtInDirectoryRoleLabel": "Built-in directory roles",
- "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "casInfoBubble": "This control works for various cloud apps.",
- "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "cert64DownloadCol": "Download base64 certificate",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Download certificate",
- "certDurationCol": "Expiry",
- "certDurationStartCol": "Valid from",
- "certName": "VpnCert",
- "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Choose Applications",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Chosen Applications",
- "chooseApplicationsEmpty": "No Applications",
- "chooseApplicationsNone": "None",
- "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseApplicationsPlural": "{0} and {1} more",
- "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
- "chooseApplicationsRemove": "Remove",
- "chooseApplicationsReturnedPlural": "{0} applications found",
- "chooseApplicationsReturnedSingular": "1 application found",
- "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
- "chooseApplicationsSearchHint": "Search Applications...",
- "chooseApplicationsSearchLabel": "Applications",
- "chooseApplicationsSearching": "Searching...",
- "chooseApplicationsSelect": "Select",
- "chooseApplicationsSelected": "Selected",
- "chooseApplicationsSingular": "{0} and 1 more",
- "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
- "chooseLocationCorpnetItem": "Corporate network",
- "chooseLocationSelectedLocationsLabel": "Selected locations",
- "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Choose Locations",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Chosen Locations",
- "chooseLocationsEmpty": "No Locations",
- "chooseLocationsExcludedSelectorTitle": "Select",
- "chooseLocationsIncludedSelectorTitle": "Select",
- "chooseLocationsNone": "None",
- "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseLocationsPlural": "{0} and {1} more",
- "chooseLocationsRemove": "Remove",
- "chooseLocationsReturnedPlural": "{0} locations found",
- "chooseLocationsReturnedSingular": "1 location found",
- "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
- "chooseLocationsSearchHint": "Search Locations...",
- "chooseLocationsSearchLabel": "Locations",
- "chooseLocationsSearching": "Searching...",
- "chooseLocationsSelect": "Select",
- "chooseLocationsSelected": "Selected",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
- "chooseLocationsSingular": "{0} and 1 more",
- "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
- "claimProviderAddCommandText": "New custom control",
- "claimProviderAddNewBladeTitle": "New custom control",
- "claimProviderDeleteCommand": "Delete",
- "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "claimProviderDeleteTitle": "Are you sure?",
- "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
- "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
- "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
- "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
- "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
- "claimProviderNotificationCreateTitle": "Creating '{0}'",
- "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
- "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
- "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
- "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
- "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
- "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
- "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
- "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
- "claimProviderNotificationUpdateTitle": "Updating '{0}'",
- "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
- "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
- "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
- "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
- "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
- "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
- "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
- "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
- "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
- "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
- "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
- "claimProvidersNone": "No custom controls",
- "claimProvidersSearchPlaceholder": "Search controls.",
- "classicPoilcyFilterTitle": "Show",
- "classicPolicyAllPlatforms": "All Platforms",
- "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
- "classicPolicyCloudAppTitle": "Cloud application",
- "classicPolicyControlAllow": "Allow",
- "classicPolicyControlBlock": "Block",
- "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
- "classicPolicyControlRequireCompliantDevice": "Require compliant device",
- "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
- "classicPolicyControlRequireMfa": "Require multifactor authentication",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
- "classicPolicyDeleteCommand": "Delete",
- "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
- "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
- "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
- "classicPolicyDetailBladeTitle": "Details",
- "classicPolicyDisableCommand": "Disable",
- "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
- "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
- "classicPolicyDisableFailTitle": "Failed to disable classic policy",
- "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
- "classicPolicyDisableInProgressTitle": "Disabling classic policy",
- "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
- "classicPolicyDisableSuccessTitle": "Classic policy disabled",
- "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
- "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
- "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
- "classicPolicyFilterAll": "All policies",
- "classicPolicyFilterDisabled": "Disabled policies",
- "classicPolicyFilterEnabled": "Enabled policies",
- "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
- "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
- "classicPolicyIncludedPlatformsTitle": "Included device platforms",
- "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
- "classicPolicyMigrateCommand": "Migrate",
- "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
- "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
- "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
- "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
- "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
- "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
- "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
- "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
- "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
- "classicPolicySaveFailDescription": "Failed to save '{0}'",
- "classicPolicySaveFailTitle": "Failed to save classic policy",
- "classicPolicySaveInProgressDescription": "Saving '{0}'",
- "classicPolicySaveInProgressTitle": "Saving classic policy",
- "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
- "classicPolicySaveSuccessTitle": "Classic policy saved",
- "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
- "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
- "clientAppBladeTitle": "Client apps",
- "clientAppDescription": "Select the client apps this policy will apply to",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
- "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
- "clientAppLegacyHeader": "Legacy authentication clients",
- "clientAppMobileDesktop": "Mobile apps and desktop clients",
- "clientAppModernHeader": "Modern authentication clients",
- "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
- "clientAppSelectSpecificClientApps": "Select client apps",
- "clientAppWebBrowser": "Browser",
- "clientAppsSelectedLabel": "{0} included",
- "clientTypeBrowser": "Browser",
- "clientTypeEas": "Exchange ActiveSync clients",
- "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
- "clientTypeModernAuth": "Modern authentication clients",
- "clientTypeOtherClients": "Other clients",
- "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
- "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
- "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
- "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
- "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
- "cloudappsSelectorPluralExcluded": "{0} apps excluded",
- "cloudappsSelectorPluralIncluded": "{0} apps included",
- "cloudappsSelectorSingularExcluded": "1 app excluded",
- "cloudappsSelectorSingularIncluded": "1 app included",
- "cloudappsSelectorUserPlural": "{0} apps",
- "cloudappsSelectorUserSingular": "1 app",
- "conditionLabelMulti": "{0} conditions selected",
- "conditionLabelOne": "1 condition selected",
- "conditionalAccessBladeTitle": "Conditional Access",
- "conditionsNotSelectedLabel": "Not configured",
- "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
- "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
- "configureCasText": "Configure Cloud App Security",
- "configureCustomControlsText": "Configure custom policy",
- "controlLabelMulti": "{0} controls selected",
- "controlLabelOne": "1 control selected",
- "controlValidatorText": "Please select at least one control",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
- "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
- "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
- "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
- "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
- "controlsMamInfoBubble": "Device must use these approved client applications.",
- "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
- "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
- "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
- "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
- "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
- "createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
- "customRoleLabel": "Custom roles (not supported)",
- "dateRangeTypeLabel": "Date range",
- "daysOfWeekPlaceholderText": "Filter days of the week",
- "daysOfWeekTypeLabel": "Days of the week",
- "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
- "descriptionContentForControlsAndOr": "For multiple controls",
- "devicePlatform": "Device platform",
- "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} included",
- "devicePlatformIncludeExclude": "{0} and {1} excluded",
- "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
- "devicePlatformsNone": "None",
- "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
- "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
- "deviceStateAll": "All device state",
- "deviceStateCompliant": "Device marked as compliant",
- "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
- "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
- "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
- "deviceStateConditionSelectorLabel": "Device state (deprecated)",
- "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
- "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
- "deviceStateDomainJoinedInfoLinkText": "Learn more.",
- "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
- "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
- "directoryRolesLabel": "Directory roles",
- "discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
- "duplicatePolicyName": "{0} COPY",
- "endDatePickerLabel": "Ends",
- "endTimePickerLabel": "End time",
- "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
- "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
- "enterUserText": "No user is selected. Select a user.",
- "evaluationResult": "Evaluation result",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
- "excludeAllTrustedLocationSelectorText": "all trusted locations",
- "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
- "friday": "Friday",
- "grantControls": "Grant controls",
- "gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
- "gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
- "gridPolicyName": "Policy Name",
- "gridPolicyState": "State",
- "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
- "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
- "groupSelectionBladeSelect": "Select groups",
- "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
- "groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
- "highRisk": "High",
- "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
- "includeAppsTextFormat": "Include: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
- "includeUnknownAreasCheckboxLabel": "Include unknown areas",
- "infoCommandLabel": "Info",
- "invalidCertDuration": "Invalid cert duration",
- "invalidIpAddress": "Value must be a valid IP address",
- "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
- "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Load all",
- "loading": "Loading...",
- "locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
- "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
- "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
- "locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
- "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
- "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
- "locationsSelectedPrivateLinksLabel": "Selected Private Links",
- "lowRisk": "Low",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
- "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
- "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
- "markAsTrustedCheckboxLabel": "Mark as trusted location",
- "mediumRisk": "Medium",
- "memberSelectionCommandRemove": "Remove",
- "menuItemClaimProviderControls": "Custom controls (Preview)",
- "menuItemClassicPolicies": "Classic policies",
- "menuItemInsightsAndReporting": "Insights and reporting",
- "menuItemManage": "Manage",
- "menuItemNamedLocationsPreview": "Named locations (Preview)",
- "menuItemNamedNetworks": "Named locations",
- "menuItemPolicies": "Policies",
- "menuItemTermsOfUse": "Terms of use",
- "modifiedTimeLabel": "Modified time",
- "monday": "Monday",
- "nameLabel": "Name",
- "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
- "namedLocationTypeCountry": "Countries/Regions",
- "namedLocationTypeLabel": "Define the location using:",
- "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
- "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "You need to select at least one country/region",
- "namedNetworkDeleteCommand": "Delete",
- "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
- "namedNetworkInvalidRange": "Value must be a valid IP range.",
- "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
- "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
- "namedNetworkIpRangesTab": "IP ranges",
- "namedNetworkListAdd": "New location",
- "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
- "namedNetworkNameDescription": "Example: 'Redmond office'",
- "namedNetworkNameInvalid": "The supplied name is invalid.",
- "namedNetworkNameRequired": "You must supply a name for this location.",
- "namedNetworkNoIpRanges": "No IP ranges",
- "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
- "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
- "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
- "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
- "namedNetworkNotificationCreateTitle": "Creating '{0}'",
- "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
- "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
- "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
- "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
- "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
- "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
- "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
- "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
- "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
- "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
- "namedNetworkSearchPlaceholder": "Search locations.",
- "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
- "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
- "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
- "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
- "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
- "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
- "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
- "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
- "namedNetworksAdd": "New named location",
- "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} and {1} excluded",
- "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} included",
- "namedNetworksNone": "No named locations found.",
- "namedNetworksTitle": "Configure locations",
- "namednetworkExceedingSizeErrorBladeTitle": "Error details",
- "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
- "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
- "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
- "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
- "newCertName": "new cert",
- "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
- "noPolicyRowMessage": "No policies",
- "noSPSelected": "No service principal selected",
- "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
- "noUserSelected": "No user selected",
- "noneRisk": "No risk",
- "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
- "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
- "oneUserSelected": "1 user selected",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
- "or": "{0} OR {1} ",
- "pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
- "policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
- "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
- "policyAssignmentsSection": "Assignments",
- "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
- "policyCloudAppsDisplayTextAllApp": "All apps",
- "policyCloudAppsLabel": "Cloud apps",
- "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionDevicePlatform": "Device platforms",
- "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
- "policyConditionLocation": "Locations",
- "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
- "policyConditionLocationPreview": "Locations (Preview)",
- "policyConditionSigninRisk": "Sign-in risk",
- "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
- "policyConditionUserRisk": "User risk",
- "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
- "policyConditioniClientApp": "Client apps",
- "policyControlAllowAccessDisplayedName": "Grant access",
- "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
- "policyControlBladeTitle": "Grant",
- "policyControlBlockAccessDisplayedName": "Block access",
- "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
- "policyControlContentDescription": "Control access enforcement to block or grant access.",
- "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
- "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
- "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
- "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
- "policyControlRequireMamDisplayedName": "Require approved client app",
- "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
- "policyControlSelectAuthStrength": "Require authentication strength",
- "policyControlsNoControlsSelected": "0 controls selected",
- "policyControlsSection": "Access controls",
- "policyCreatBladeTitle": "New",
- "policyCreateButton": "Create",
- "policyCreateFailedMessage": "Error: {0}",
- "policyCreateFailedTitle": "Failed to create '{0}'",
- "policyCreateInProgressTitle": "Creating '{0}'",
- "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyCreateSuccessTitle": "Successfully created '{0}'",
- "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "policyDeleteFailTitle": "Failed to delete '{0}'",
- "policyDeleteInProgressTitle": "Deleting '{0}'",
- "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
- "policyEnforceLabel": "Enable policy",
- "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
- "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
- "policyErrorUnknown": "Something went wrong, please try again later.",
- "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
- "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
- "policyNameCannotBeEmpty": "Policy name can't be empty",
- "policyNameDevice": "Device policy",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Mobile App Management policy",
- "policyNameMfaLocation": "Multifactor authentication and location policy",
- "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
- "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
- "policyOff": "Off",
- "policyOn": "On",
- "policyReportOnly": "Report-only",
- "policyReviewSection": "Review",
- "policySaveButton": "Save",
- "policyStatusIconDescription": "Policy is Enabled",
- "policyStatusIconEnabled": "Enabled status icon",
- "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
- "policyTemplateName2": "Allow {0} access only on managed devices",
- "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
- "policyTriggerRiskSpecific": "Select specific risk level",
- "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
- "policyTriggersNoConditionsSelected": "0 conditions selected",
- "policyTriggersSelectorLabel": "Conditions",
- "policyUpdateFailedMessage": "Error: {0}",
- "policyUpdateFailedTitle": "Failed to update {0}",
- "policyUpdateInProgressTitle": "Updating {0}",
- "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyUpdateSuccessTitle": "Successfully updated {0}",
- "primaryCol": "Primary",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
- "requireAllControlsText": "Require all the selected controls",
- "requireCompliantDevice": "Require compliant device",
- "requireDomainJoined": "Require domain-joined device",
- "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
- "requireMFA": "Require multifactor authentication",
- "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
- "requireOneControlText": "Require one of the selected controls",
- "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
- "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
- "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
- "resetFilters": "Reset filters",
- "sPRequired": "Service principal required",
- "sPSelectorInfoBalloon": "User or Service Principal you want to test",
- "saturday": "Saturday",
- "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
- "securityDefaultsPolicyName": "Security defaults",
- "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
- "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
- "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
- "selectDevicePlatforms": "Select device platforms",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Select locations",
- "selectedSP": "Selected Service Principal",
- "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
- "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
- "servicePrincipalDataGridAria": "List of available service principals",
- "servicePrincipalDropDownLabel": "What does this policy apply to?",
- "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
- "servicePrincipalSelectionsAria": "Selected service principals grid",
- "servicePrincipalSelectorAria": "List of chosen service principals",
- "servicePrincipalSelectorMultiple": "{0} service principals selected",
- "servicePrincipalSelectorSingle": "1 service principal selected",
- "servicePrincipalSpecificExc": "Specific service principals excluded",
- "servicePrincipalSpecificInc": "Specific service principals included",
- "servicePrincipals": "Service principals",
- "sessionControlBladeTitle": "Session",
- "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
- "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
- "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
- "sessionControls": "Session controls",
- "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
- "sessionControlsCasLabel": "Use Conditional Access App Control",
- "sessionControlsSecureSignInLabel": "Require token binding",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} included",
- "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
- "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
- "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
- "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
- "specificUsersExcluded": "specific users excluded",
- "specificUsersIncluded": "Specific users included",
- "specificUsersIncludedAndExcluded": "Specific users excluded and included",
- "startDatePickerLabel": "Starts",
- "startFreeTrial": "Start a free trial",
- "startTimePickerLabel": "Start time",
- "sunday": "Sunday",
- "testButton": "What If",
- "thumbprintCol": "Thumbprint",
- "thursday": "Thursday",
- "timeConditionAllTimesLabel": "Any time",
- "timeConditionIntroText": "Configure the time this policy will apply to",
- "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
- "timeConditionSelectorLabel": "Time (Preview)",
- "timeConditionSpecificLabel": "Specific times",
- "timeSelectorAllTimesText": "Any time",
- "timeSelectorSpecificTimesText": "Specific times configured",
- "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
- "timeZoneDropdownLabel": "Time zone",
- "timeZoneDropdownPlaceholderText": "Select a time zone",
- "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
- "tooManyPoliciesTitle": "More than 50 policies found",
- "trustedLocationStatusIconDescription": "Location is trusted",
- "trustedLocationStatusIconEnabled": "Trusted status icon",
- "tuesday": "Tuesday",
- "uploadInBadState": "Unable to upload the specified file.",
- "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
- "upsellAppsTitle": "Secure applications",
- "upsellBannerText": "Get a free Premium trial to use this feature",
- "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
- "upsellDataTitle": "Secure data",
- "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
- "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
- "upsellRiskTitle": "Protect against risk",
- "upsellTitle": "Conditional Access",
- "upsellWhyTitle": "Why use Conditional Access?",
- "userAppNoneOption": "None",
- "userNamePlaceholderText": "Enter User Name",
- "userNotSetSeletorLabel": "0 users and groups selected",
- "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
- "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
- "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
- "userOrSPSelectionBladeTitle": "Users or workload identities",
- "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
- "userRequired": "User Required",
- "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
- "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
- "userSPRequired": "User or Service principal required",
- "userSPSelectorTitle": "User or Workload identity",
- "userSelectionBladeAllUsersAndGroups": "All users and groups",
- "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
- "userSelectionBladeExcludeTabTitle": "Exclude",
- "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
- "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
- "userSelectionBladeIncludeTabTitle": "Include",
- "userSelectionBladeIncludedSelectorTitle": "Select",
- "userSelectionBladeSelectUsers": "Select users",
- "userSelectionBladeSelectedUsers": "Select users and groups",
- "userSelectionBladeTitle": "Users and groups",
- "userSelectorBladeTitle": "Users",
- "userSelectorExcluded": "{0} excluded",
- "userSelectorGroupPlural": "{0} groups",
- "userSelectorGroupSingular": "1 group",
- "userSelectorIncluded": "{0} included",
- "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
- "userSelectorSelected": "{0} selected",
- "userSelectorTitle": "User",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} users",
- "userSelectorUserSingular": "1 user",
- "userSelectorWithExclusion": "{0} and {1}",
- "usersGroupsLabel": "Users and groups",
- "viewApprovedAppsText": "See list of approved client apps",
- "viewCompliantAppsText": "See list of policy protected client apps",
- "viewPolicyInformation": "View policy information",
- "vpnBladeTitle": "VPN connectivity",
- "vpnCertCreateFailedMessage": "Error: {0}",
- "vpnCertCreateFailedTitle": "Failed to create {0}",
- "vpnCertCreateInProgressTitle": "Creating {0}",
- "vpnCertCreateSuccessMessage": "Successfully created {0}.",
- "vpnCertCreateSuccessTitle": "Successfully created {0}",
- "vpnCertNoRowsMessage": "No VPN certificates found",
- "vpnCertUpdateFailedMessage": "Error: {0}",
- "vpnCertUpdateFailedTitle": "Failed to update {0}",
- "vpnCertUpdateInProgressTitle": "Updating {0}",
- "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
- "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
- "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
- "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
- "vpnMenuText": "VPN connectivity",
- "vpncertDropdownDefaultOption": "Duration",
- "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
- "vpncertDropdownLabel": "Select duration",
- "vpncertDropdownOneyearOption": "1 year",
- "vpncertDropdownThreeyearOption": "3 years",
- "vpncertDropdownTwoyearOption": "2 years",
- "wednesday": "Wednesday",
- "whatIfCountry": "Country/Region",
- "whatIfCountryInfo": "The country/region the user is signing in from.",
- "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
- "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
- "whatIfIpAddress": "IP address",
- "whatIfIpAddressInfo": "IP address the user is signing in from.",
- "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
- "whatIfSelectCountry": "Select country/region...",
- "whatIfSelectDevicePlatform": "Select device platform...",
- "whatIfSelectPrivateLink": "Select private link...",
- "whatIfSelectSignInRisk": "Select sign-in risk...",
- "whatIfSignInRisk": "Sign-in risk",
- "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
- "whatIfUnknownAreas": "Unknown Areas",
- "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Workload identities (preview)",
- "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
- "workloadIdentity": "Workload identity"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Not supported",
- "supportEnding": "Support ending",
- "supported": "Supported"
- }
- },
- "SecurityTemplate": {
- "aSR": "Attack surface reduction",
- "accountProtection": "Account protection",
- "allDevices": "All devices",
- "antivirus": "Antivirus",
- "antivirusReporting": "Antivirus Reporting (Preview)",
- "conditionalAccess": "Conditional access",
- "deviceCompliance": "Device compliance",
- "diskEncryption": "Disk encryption",
- "eDR": "Endpoint detection and response",
- "ePM": "Endpoint Privilege Management",
- "firewall": "Firewall",
- "helpSupport": "Help and support",
- "setup": "Setup",
- "wdapt": "Microsoft Defender for Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Failed",
- "hardReboot": "Hard reboot",
- "retry": "Retry",
- "softReboot": "Soft reboot",
- "success": "Success"
- },
- "Columns": {
- "codeType": "Code type",
- "returnCode": "Return code"
- },
- "bladeTitle": "Return codes",
- "gridAriaLabel": "Return codes",
- "header": "Specify return codes to indicate post-installation behavior:",
- "onAddAnnounceMessage": "Return code added item {0} of {1}",
- "onDeleteSuccess": "Return code {0} deleted successfully",
- "returnCodeAlreadyUsedValidation": "Return code is already used.",
- "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
- "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
- "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
- "selectorLabel": "Return codes"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabic",
- "bulgarian": "Bulgarian",
- "chineseSimplified": "Chinese (Simplified)",
- "chineseTraditional": "Chinese (Traditional)",
- "croatian": "Croatian",
- "czech": "Czech",
- "danish": "Danish",
- "dutch": "Dutch",
- "englishUK": "English (United Kingdom)",
- "englishUS": "English (United States)",
- "estonian": "Estonian",
- "finnish": "Finnish",
- "frenchCanada": "French (Canada)",
- "frenchFrance": "French (France)",
- "german": "German",
- "greek": "Greek",
- "hebrew": "Hebrew",
- "hungarian": "Hungarian",
- "italian": "Italian",
- "japanese": "Japanese",
- "korean": "Korean",
- "latvian": "Latvian",
- "lithuanian": "Lithuanian",
- "norwegian": "Norwegian, Bokmål",
- "polish": "Polish",
- "portugueseBrazil": "Portuguese (Brazil)",
- "portuguesePortugal": "Portuguese (Portugal)",
- "romanian": "Romanian",
- "russian": "Russian",
- "serbian": "Serbian",
- "slovak": "Slovak",
- "slovenian": "Slovenian",
- "spanishMexico": "Spanish (Mexico)",
- "spanishSpain": "Spanish (Spain)",
- "swedish": "Swedish",
- "thai": "Thailand",
- "turkish": "Turkish",
- "ukrainian": "Ukrainian"
- },
- "Summary": {
- "placeholder": "Select a notification message from the left to preview contents."
- },
- "companyContact": "Show contact information",
- "companyLogo": "Show company logo",
- "companyName": "Show company name",
- "createEditDescription": "Create or edit notification message templates.",
- "createMessage": "Create message",
- "deviceDetails": "Show device details",
- "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
- "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
- "editMessage": "Edit message",
- "email": "email",
- "emailFooterTitle": "Email Footer",
- "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
- "emailHeaderTitle": "Email Header",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Configure Customization settings",
- "formSubTitle": "Create or modify notification emails",
- "headerFooterSettingsTab": "Header and footer settings",
- "imgPreview": "Image Preview",
- "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
- "iwLink": "Show company portal website link",
- "listEmpty": "No message templates.",
- "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "listSubTitle": "List of notification message templates",
- "listTitle": "Notification message templates",
- "localizedNotificationMessageTemplates": "Localized notification message templates",
- "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
- "messageCapitalized": "Notification message template",
- "messageLowercase": "notification message template",
- "missingDefaultError": "Select a default template",
- "notificationMessageTemplates": "Notification message templates",
- "rowValidationError": "At least one message template is required",
- "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "tenantValueText": "Tenant Value",
- "testEmailLabel": "Send preview email",
- "localeLabel": "Locale",
- "isDefaultLocale": "Is Default"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Number of days to wait before restart is enforced"
- },
"Description": {
"label": "Description"
},
+ "FeatureDeploymentSettings": {
+ "header": "Feature deployment settings"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "This feature cannot downgrade a device.",
+ "label": "Feature update to deploy"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Final group availability"
+ },
+ "GradualRolloutInterval": {
+ "label": "Days between groups"
+ },
+ "GradualRolloutStartDate": {
+ "label": "First group availability"
+ },
"Name": {
"label": "Name"
},
- "QualityUpdateRelease": {
- "label": "Expedite installation of quality updates if device OS version less than:"
- },
- "bladeTitle": "Quality updates Windows 10 and later (preview)",
- "loadError": "Loading failed!"
+ "OptionalUpdate": {
+ "label": "Required or optional update"
+ },
+ "RolloutOptions": {
+ "label": "Rollout options"
+ },
+ "RolloutSettings": {
+ "header": "When would you like to make the update available in Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Configure scope tags for this policy."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "First available date"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Disabled",
+ "enabled": "Enabled",
+ "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
+ "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
+ "notApplicable": "Not Applicable",
+ "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
+ },
+ "bladeTitle": "Feature update deployments",
+ "deploymentSettingsTitle": "Deployment settings",
+ "loadError": "Loading failed!",
+ "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\" has been saved.",
+ "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
+ },
"TabName": {
- "qualityUpdateSettings": "Settings"
+ "deploymentSettings": "Deployment settings",
+ "groupAssignmentSettings": "Assignments",
+ "scopeSettings": "Scope tags"
},
- "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
- "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
- "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
- "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
+ "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
+ "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
+ "profileNameWarning": "Name should be less than 64 characters",
+ "specificLicensingRequired": "Some selected capabilities require specific licensing."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64-bit",
- "thirtyTwoBit": "32-bit"
- },
- "TACSettings": {
- "edgeSettings": "Edge configuration settings",
- "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
- "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
- "generalAppConfig": "General app configuration",
- "generalSettings": "General configuration settings",
- "outlookSMIMEConfig": "Outlook S/MIME settings",
- "outlookSettings": "Outlook configuration settings",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Add network boundary",
- "addNetworkBoundaryButton": "Add network boundary...",
- "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
- "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
- "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
- "boundaryType": "Boundary type",
- "cloudResources": "Cloud resources",
- "corporateIdentity": "Corporate identity",
- "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
- "editNetworkBoundary": "Edit network boundary",
- "enrollmentState": "Enrollment state",
- "iPv4Ranges": "IPv4 ranges",
- "iPv6Ranges": "IPv6 ranges",
- "internalProxyServers": "Internal proxy servers",
- "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
- "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
- "mdmDiscoveryUrl": "MDM discovery URL",
- "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
- "minimumPinLength": "Set the minimum number of characters required for the PIN",
- "name": "Name",
- "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
- "networkBoundary": "Network boundary",
- "networkDomainNames": "Network domains",
- "neutralResources": "Neutral resources",
- "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
- "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
- "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
- "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
- "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
- "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
- "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
- "protectedDomainNames": "Protected domains",
- "proxyServers": "Proxy servers",
- "requireAppPin": "Disable app PIN when device PIN is managed",
- "requiredSettings": "Required settings",
- "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
- "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
- "revokeOnUnenroll": "Revoke encryption keys on unenroll",
- "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
- "showWipIcon": "Show the enterprise data protection icon",
- "type": "Type",
- "useRmsForWip": "Use Azure RMS for WIP",
- "value": "Value",
- "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
- "wipProtectionMode": "Windows Information Protection mode",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
+ "Platform": {
+ "all": "All",
+ "android": "Android device administrator",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android enterprise",
+ "common": "Common",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS and Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "windows": "Windows",
+ "windows10": "Windows 10 and later",
+ "windows10CM": "Windows 10 and later (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 and later",
+ "windows8And10": "Windows 8 and 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 and later",
+ "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows PC"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filter",
+ "noFilters": "None"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Author",
- "template": "Template name"
- },
- "Row": {
- "ariaLabel": "row {0} of {1} column {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
- },
- "SettingsCatalog": {
- "subtitle": "Start from scratch and select settings you want from the library of available settings",
- "title": "Settings catalog"
- },
- "Templates": {
- "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
- "title": "Templates"
- },
- "noData": "No policy templates found"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop Client",
- "visioProRetail": "Visio Online Plan 2"
- },
- "Countries": {
- "ae": "United Arab Emirates",
- "ag": "Antigua and Barbuda",
- "ai": "Anguilla",
- "al": "Albania",
- "am": "Armenia",
- "ao": "Angola",
- "ar": "Argentina",
- "at": "Austria",
- "au": "Australia",
- "az": "Azerbaijan",
- "bb": "Barbados",
- "be": "Belgium",
- "bf": "Burkina Faso",
- "bg": "Bulgaria",
- "bh": "Bahrain",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolivia",
- "br": "Brazil",
- "bs": "Bahamas",
- "bt": "Bhutan",
- "bw": "Botswana",
- "by": "Belarus",
- "bz": "Belize",
- "ca": "Canada",
- "cg": "Republic Of Congo",
- "ch": "Switzerland",
- "cl": "Chile",
- "cn": "China",
- "co": "Colombia",
- "cr": "Costa Rica",
- "cv": "Cape Verde",
- "cy": "Cyprus",
- "cz": "Czech Republic",
- "de": "Germany",
- "dk": "Denmark",
- "dm": "Dominica",
- "do": "Dominican Republic",
- "dz": "Algeria",
- "ec": "Ecuador",
- "ee": "Estonia",
- "eg": "Egypt",
- "es": "Spain",
- "fi": "Finland",
- "fj": "Fiji",
- "fm": "Federated States Of Micronesia",
- "fr": "France",
- "gb": "United Kingdom",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Greece",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hong Kong",
- "hn": "Honduras",
- "hr": "Croatia",
- "hu": "Hungary",
- "id": "Indonesia",
- "ie": "Ireland",
- "il": "Israel",
- "in": "India",
- "is": "Iceland",
- "it": "Italy",
- "jm": "Jamaica",
- "jo": "Jordan",
- "jp": "Japan",
- "ke": "Kenya",
- "kg": "Kyrgyzstan",
- "kh": "Cambodia",
- "kn": "St. Kitts and Nevis",
- "kr": "Republic Of Korea",
- "kw": "Kuwait",
- "ky": "Cayman Islands",
- "kz": "Kazakstan",
- "la": "Lao People’s Democratic Republic",
- "lb": "Lebanon",
- "lc": "St. Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Lithuania",
- "lu": "Luxembourg",
- "lv": "Latvia",
- "md": "Republic Of Moldova",
- "mg": "Madagascar",
- "mk": "North Macedonia",
- "ml": "Mali",
- "mn": "Mongolia",
- "mo": "Macau",
- "mr": "Mauritania",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Mexico",
- "my": "Malaysia",
- "mz": "Mozambique",
- "na": "Namibia",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Netherlands",
- "no": "Norway",
- "np": "Nepal",
- "nz": "New Zealand",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua New Guinea",
- "ph": "Philippines",
- "pk": "Pakistan",
- "pl": "Poland",
- "pt": "Portugal",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Romania",
- "ru": "Russia",
- "sa": "Saudi Arabia",
- "sb": "Solomon Islands",
- "sc": "Seychelles",
- "se": "Sweden",
- "sg": "Singapore",
- "si": "Slovenia",
- "sk": "Slovakia",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Suriname",
- "st": "Sao Tome and Principe",
- "sv": "El Salvador",
- "sz": "Swaziland",
- "tc": "Turks and Caicos",
- "td": "Chad",
- "th": "Thailand",
- "tj": "Tajikistan",
- "tm": "Turkmenistan",
- "tn": "Tunisia",
- "tr": "Turkey",
- "tt": "Trinidad and Tobago",
- "tw": "Taiwan",
- "tz": "Tanzania",
- "ua": "Ukraine",
- "ug": "Uganda",
- "us": "United States",
- "uy": "Uruguay",
- "uz": "Uzbekistan",
- "vc": "St. Vincent and The Grenadines",
- "ve": "Venezuela",
- "vg": "British Virgin Islands",
- "vn": "Vietnam",
- "ye": "Yemen",
- "za": "South Africa",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Current Channel",
- "deferred": "Semi-Annual Enterprise Channel",
- "firstReleaseCurrent": "Current Channel (Preview)",
- "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
- "monthlyEnterprise": "Monthly Enterprise Channel",
- "placeHolder": "Select one"
- },
- "AppProtection": {
- "allAppTypes": "Target to all app types",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Apps in Android Work Profile",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
- "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
- "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
- "appsOnUnmanagedDevices": "Apps on unmanaged devices",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Not Available",
- "windows10PlatformLabel": "Windows 10 and later",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Built-in Role",
- "customCloudPCRole": "Custom Windows 365 role",
- "customIntuneRole": "Custom Intune role",
- "customRole": "Custom Role"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "header": "Are you sure you want to delete this restriction?"
- },
- "DeviceLimit": {
- "description": "Specify the maximum number of devices a user can enroll.",
- "header": "Device limit restrictions",
- "info": "Define how many devices each user can enroll."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Must be 1.0 or greater.",
- "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
- "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
- "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
- "min": "Minimum cannot be lower than {0}",
- "minMax": "Minimum version cannot be greater than maximum version.",
- "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
- "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
- },
- "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
- "blockManufacturerPlaceHolder": "Manufacturer name",
- "blockManufacturersHeader": "Blocked manufacturers",
- "cannotRestrict": "Restriction not supported",
- "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
- "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
- "configurations": "Configure platforms",
- "deviceManufacturer": "Device manufacturer",
- "header": "Device type restrictions",
- "info": "Define which platforms, versions, and management types can enroll.",
- "manufacturer": "Manufacturer",
- "max": "Max",
- "maxVersion": "Maximum version",
- "min": "Min",
- "minVersion": "Minimum version",
- "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
- "personal": "Personally owned",
- "platform": "Platform",
- "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
- "platformSettings": "Platform settings",
- "platforms": "Select platforms",
- "platformsSelected": "{0} platforms selected",
- "type": "Type",
- "versions": "versions",
- "versionsRange": "Allow min/max range:",
- "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
- },
- "Priority": {
- "saved": "Restriction Priorities were successfully saved."
- },
- "Row": {
- "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
- },
- "Table": {
- "deployed": "Deployed",
- "name": "Name",
- "priority": "Priority"
- },
- "Type": {
- "limit": "Device limit restriction",
- "type": "Device type restriction"
- },
- "allUsers": "All Users",
- "androidRestrictions": "Android restrictions",
- "create": "Create restriction",
- "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
- "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
- "deleteTitle": "Are you sure you want to delete {0} restriction?",
- "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
- "edit": "Edit restriction",
- "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
- "iosRestrictions": "iOS restrictions",
- "mDM": "MDM",
- "macRestrictions": "macOS restrictions",
- "maxVersion": "Max Version",
- "minVersion": "Min Version",
- "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
- "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
- "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
- "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
- "notFound": "Restriction not found. It may have already been deleted.",
- "personallyOwned": "Personally owned devices",
- "restriction": "Restriction",
- "restrictionLowerCase": "restriction",
- "restrictionType": "Restriction type",
- "selectType": "Select restriction type",
- "selectValidation": "Please select a platform",
- "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
- "typeRequired": "Restriction type is required.",
- "winPhoneRestrictions": "Windows Phone restrictions",
- "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
- "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
- "windowsRestrictions": "Windows restrictions",
- "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
- },
- "InstallContextType": {
- "device": "Device",
- "deviceContext": "Device context",
- "user": "User",
- "userContext": "User context"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Description",
- "placeholder": "Enter a description"
- },
- "NameTextBox": {
- "label": "Name",
- "placeholder": "Enter a name"
- },
- "PublisherTextBox": {
- "label": "Publisher",
- "placeholder": "Enter a publisher"
- },
- "VersionTextBox": {
- "label": "Version"
- },
- "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
- },
- "ScopeTags": {
- "headerDescription": "Select one or more groups to assign the script package."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Detection script",
- "placeholder": "Input script text",
- "requiredValidationMessage": "Please enter the detection script"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Enforce script signature check"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Run this script using the logged-on credentials"
- },
- "RemediationScript": {
- "infoBox": "This script will run in detect-only mode because there is no remediation script."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Remediation script",
- "placeholder": "Input script text"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Run script in 64-bit PowerShell"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
- },
- "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
- "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
- },
- "title": "Create custom script",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Interval",
- "time": "Date and time"
- },
- "Interval": {
- "day": "Repeats every day",
- "days": "Repeats every {0} days",
- "hour": "Repeats every hour",
- "hours": "Repeats every {0} hours",
- "month": "Repeats every month",
- "months": "Repeats every {0} months",
- "week": "Repeats every week",
- "weeks": "Repeats every {0} weeks"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) on {1}",
- "withDate": "{0} on {1}"
- }
- }
- },
- "Edit": {
- "title": "Edit - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Allowed URLs",
- "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "ApplicationProxyRedirection": {
- "header": "Application proxy",
- "title": "Application proxy redirection",
- "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
- },
- "BlockedURLs": {
- "title": "Blocked URLs",
- "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "Bookmarks": {
- "header": "Managed bookmarks",
- "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Managed homepage",
- "title": "Homepage shortcut URL",
- "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Redirect restricted sites to personal context",
- "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
- }
- },
- "BooleanActions": {
- "allow": "Allow",
- "block": "Block",
- "configured": "Configured",
- "disable": "Disable",
- "dontRequire": "Don't Require",
- "enable": "Enable",
- "hide": "Hide",
- "limit": "Limit",
- "notConfigured": "Not configured",
- "require": "Require",
- "show": "Show",
- "yes": "Yes"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Make available to users as an optional update",
- "optionalValue": "Optional",
- "required": "Make available to users as a required update",
- "requiredValue": "Required"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 day",
- "twoDays": "2 days",
- "zeroDays": "0 days"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Overview"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load iOS software update profiles"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS update profile",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profile"
- },
- "listLoadError": "Unable to load iOS software update profiles, try again later",
- "lowercase": "iOS update policy",
- "uppercase": "iOS Update policy"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
- "latestUpdate": "Latest update",
- "noLongerSupported": "Selected version is no longer supported",
- "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
- "prefix": "Install iOS/iPadOS",
- "selectSupported": "Select update version supported by Apple",
- "updateToInstall": "Update to install"
- },
- "Schedule": {
- "always": "Update at next check-in",
- "duringTimeWindows": "Update during scheduled time",
- "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
- "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
- "label": "Schedule type",
- "outsideActiveHours": "Update outside of active hours (legacy)",
- "outsideTimeWindows": "Update outside of scheduled time",
- "timeWindow": "Time window",
- "timeZone": "Time zone",
- "title": "Update policy schedule settings:",
- "weekly": "Weekly schedule",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
- "label": "Select version to install"
- },
- "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
- "notAvailable": "N/A"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "There are no iOS update policies to display",
- "macOsUpdates": "There are no macOS software update policies to display",
- "windowsUpdates": "There are no update rings for Windows 10 and later to show."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Device name",
- "deviceUpdateStatus": "Device update status",
- "lastUpdated": "Last updated",
- "osVersion": "OS version",
- "userPrincipalName": "User name"
- },
- "maximumOSVersionFilter": "Maximum OS version",
- "minimumOSVersionFilter": "Minimum OS version",
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by device name, user name or OS version",
- "title": "Account summary for macOS devices"
- },
- "Category": {
- "configurationDataFile": "Configuration data file",
- "critical": "Critical",
- "firmware": "Firmware",
- "other": "Other"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "successfulUpdateCount": "Successful updates deployed",
- "totalUpdateCount": "Total updates deployed",
- "updateCategory": "Update category",
- "updateCategoryStatus": "Update category status"
- },
- "noData": "No data to display"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load macOS software update profiles"
- }
- },
- "State": {
- "available": "Available",
- "commandFailed": "Command failed",
- "downloadFailed": "Download failed",
- "downloadInsufficientNetwork": "Download insufficient network",
- "downloadInsufficientPower": "Download insufficient power",
- "downloadInsufficientSpace": "Download insufficient space",
- "downloaded": "Downloaded",
- "downloading": "Downloading",
- "idle": "Idle",
- "installFailed": "Install failed",
- "installInsufficientPower": "Install insufficient power",
- "installInsufficientSpace": "Install insufficient space",
- "installing": "Installing",
- "scheduled": "Scheduled",
- "success": "Success",
- "unknown": "Unknown"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "updateName": "Update name",
- "updateStatus": "Update status",
- "version": "Version"
- },
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by update name or version"
- },
- "SummaryBlade": {
- "subtitle": "macOS update profile",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profile"
- },
- "error": "Error",
- "errorOrErrors": "Error(s)",
- "errors": "Errors",
- "listLoadError": "Unable to load macOS software update profiles, try again later",
- "lowercase": "macOs update policy",
- "other": "Other",
- "subtitle": "MacOS software update",
- "upToDate": "Up to date",
- "uppercase": "macOS Update Policy"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Please try again later",
- "title": "Failed to delete {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Please try again later"
- },
- "LoadConfigurationFailed": {
- "description": "Please try again later",
- "title": "Failed to load {0}"
- },
- "idWrongFormat": "The provided id for the profile is not in the expected format."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "At least one time window should be selected",
- "tooMany": "A maximum of 20 time windows can be configured"
- }
- },
- "endDay": "End day",
- "endTime": "End time",
- "startDay": "Start day",
- "startTime": "Start time",
- "timeWindowError": "Choose a window of time that spans at least one hour."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load update ring profiles for Windows 10 and later."
- }
- },
- "SummaryBlade": {
- "subtitle": "Update ring for Windows 10 and later",
- "title": "Windows Update for Business"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 and later",
- "title": "Update ring for Windows 10 and later"
- },
- "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
- "lowercase": "Update ring",
- "uppercase": "Update Ring"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Update policy settings",
- "updateRingSettings": "Update ring settings"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Create {0}",
- "edit": "Edit {0}"
- }
- },
- "notScannedYet": "Not scanned yet",
- "outOfDateIosDevices": "Out of date iOS devices"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Device restrictions (device owner)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS Update policy"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Equals",
+ "greaterThan": "Greater than",
+ "greaterThanOrEqualTo": "Greater than or equal to",
+ "lessThan": "Less than",
+ "lessThanOrEqualTo": "Less than or equal to",
+ "notEqualTo": "Not equal to"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Enforce script signature check and run script silently",
+ "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
+ "header": "Use a custom detection script",
+ "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
+ "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileNotSelectedValidation": "No script file is selected.",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
+ "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Date created",
+ "dateModified": "Date modified",
+ "doesNotExist": "File or folder does not exist",
+ "fileOrFolderExists": "File or folder exists",
+ "sizeInMB": "Size in MB",
+ "version": "String (version)"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "fileOrFolder": "File or folder",
+ "fileOrFolderToolTip": "The file or folder to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "path": "Path",
+ "pathTooltip": "The full path of the folder containing the file or folder to detect.",
+ "value": "Value",
+ "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
+ },
+ "GridColumns": {
+ "pathOrCode": "Path/Code",
+ "type": "Type"
+ },
+ "MsiRule": {
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
+ "productCode": "MSI product code",
+ "productCodeTooltip": "A valid MSI product code for the app.",
+ "productVersion": "Value",
+ "productVersionCheck": "MSI product version check",
+ "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
+ "productVersionTooltip": "Enter the MSI product version for the app."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Integer comparison",
+ "keyDoesNotExist": "Key does not exist",
+ "keyExists": "Key exists",
+ "stringComparison": "String comparison",
+ "valueDoesNotExist": "Value does not exist",
+ "valueExists": "Value exists",
+ "versionComparison": "Version comparison"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "value": "Value",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the registry value to detect.",
+ "valueTooltip": "Select a value that matches the selected detection method."
+ },
+ "RuleTypeOptions": {
+ "file": "File",
+ "mSI": "MSI",
+ "registry": "Registry"
+ },
+ "gridAriaLabel": "Detection Rules",
+ "header": "Create a rule that indicates the presence of the app.",
+ "noRulesSelectedPlaceholder": "No rules are specified.",
+ "ruleTableLimit": "You can add up to 25 detection rules",
+ "ruleType": "Rule type",
+ "ruleTypeTooltip": "Choose the type of detection rule to add."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Use a custom detection script",
+ "manual": "Manually configure detection rules"
+ },
+ "bladeTitle": "Detection rules",
+ "header": "Configure app specific rules used to detect the presence of the app.",
+ "rulesFormat": "Rules format",
+ "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
+ "selectorLabel": "Detection rules"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Accept the Microsoft Software License Terms on behalf of users",
"appSuiteConfigurationLabel": "App suite configuration",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} language(s) selected",
"xmlConfigurationLabel": "XML Configuration"
},
- "Filters": {
- "ruleSyntax": "Rule syntax",
- "filters": "Filters"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Allow user to change setting",
- "tooltip": "Specify if the user is allowed to change the setting."
- },
- "AllowWorkAccounts": {
- "title": "Allow only work or school accounts",
- "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
- },
- "BlockExternalImages": {
- "title": "Block external images",
- "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
- },
- "ConfigureEmail": {
- "title": "Configure email account settings"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
- "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
- },
- "title": "Default app signature"
- },
- "OfficeFeedReplies": {
- "title": "Discover Feed",
- "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
- },
- "OrganizeMailByThread": {
- "title": "Organize mail by thread",
- "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
- },
- "PlayMyEmails": {
- "title": "Play My Emails",
- "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
- },
- "SuggestedReplies": {
- "title": "Suggested replies",
- "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
- },
- "SyncCalendars": {
- "title": "Sync Calendars",
- "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
- },
- "TextPredictions": {
- "title": "Text Predictions",
- "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
- },
- "ThemesEnabled": {
- "title": "Themes enabled",
- "tooltip": "Specify if the user is allowed to use a custom visual theme."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS devices"
- },
- "ManagedDesktop": {
- "adminContacts": "Admin contacts",
- "appPackaging": "App packaging",
- "autopatchGroups": "Autopatch groups",
- "devices": "Devices",
- "featureEnablement": "Feature activate",
- "feedback": "Feedback",
- "gettingStarted": "Getting started",
- "messages": "Messages",
- "onlineResources": "Online resources",
- "policyHealth": "Policy health",
- "policyHealthPreview": "Policy health (preview)",
- "releaseManagement": "Release management",
- "serviceRequests": "Service requests",
- "settings": "Settings",
- "supportRequests": "Support requests",
- "tenantEnrollment": "Tenant enrollment",
- "tenantManagement": "Tenant management"
- },
- "actions": "Actions for Non-Compliance",
- "advancedExchangeSettings": "Exchange online settings",
- "advancedThreatProtection": "Microsoft Defender for Endpoint",
- "allApps": "All apps",
- "allDevices": "All devices",
- "androidFotaDeployments": "Android FOTA deployments",
- "appBundles": "App Bundles",
- "appCategories": "App categories",
- "appConfigPolicies": "App configuration policies",
- "appConfigurationStatus": "App Configuration Status",
- "appInstallStatus": "App install status",
- "appLicences": "App licenses",
- "appProtectionPolicies": "App protection policies",
- "appProtectionStatus": "App Protection status",
- "appSelectiveWipe": "App selective wipe",
- "appleVppTokens": "Apple VPP Tokens",
- "apps": "Apps",
- "assign": "Assignments",
- "assignedPermissions": "Assigned permissions",
- "assignedRoles": "Assigned roles",
- "autopilotDeploymentReport": "Autopilot deployments (preview)",
- "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
- "brandingAndCustomization": "Customization",
- "cartProfiles": "Cart profiles",
- "certificateConnectors": "Certificate connectors",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Cloud attached devices (preview)",
- "cloudPcActions": "Cloud PC actions (preview)",
- "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
- "compliancePolicies": "Compliance policies",
- "complianceScriptManagement": "Scripts",
- "complianceScriptManagementPreview": "Scripts (preview)",
- "complianceSettings": "Compliance policy settings",
- "conditionStatements": "Condition statements",
- "conditions": "Locations",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Configuration profiles",
- "configurationScripts": "Configuration Scripts",
- "connectorsAndTokens": "Connectors and tokens",
- "corporateDeviceIdentifiers": "Corporate device identifiers",
- "customAttributes": "Custom attributes",
- "customNotifications": "Custom notifications",
- "deploymentSettings": "Deployment settings",
- "derivedCredentials": "Derived Credentials",
- "deviceActions": "Device actions",
- "deviceCategories": "Device categories",
- "deviceCleanUp": "Device clean-up rules",
- "deviceEnrollmentManagers": "Device enrollment managers",
- "deviceExecutionStatus": "Device status",
- "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
- "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
- "devices": "Devices",
- "discoveredApps": "Discovered apps",
- "edgePolicies": "Policies for Microsoft Edge",
- "embeddedSIM": "eSIM cellular profiles (preview)",
- "enrollDevices": "Enroll devices",
- "enrollmentFailures": "Enrollment failures",
- "enrollmentNotifications": "Enrollment notifications (preview)",
- "enrollmentRestrictions": "Enrollment restrictions",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange service connectors",
- "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
- "failuresForDriverUpdates": "Windows Driver update failures",
- "failuresForFeatureUpdates": "Feature update failures",
- "failuresForQualityUpdates": "Windows Expedited update failures",
- "featureFlighting": "Feature flighting",
- "featureUpdateDeployments": "Feature updates for Windows 10 and later",
- "flighting": "Flighting",
- "fotaUpdate": "Firmware over-the-air update",
- "groupPolicy": "Administrative Templates",
- "groupPolicyAnalytics": "Group policy analytics",
- "helpSupport": "Help and support",
- "helpSupportReplacement": "Help and support ({0})",
- "iOSAppProvisioning": "iOS app provisioning profiles",
- "incompleteUserEnrollments": "Incomplete user enrollments",
- "iosUpdates": "Update policies for iOS/iPadOS",
- "legacyPcManagement": "Legacy PC management",
- "macOSSoftwareUpdate": "Update policies for macOS",
- "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
- "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
- "macOSSoftwareUpdateStateSummaries": "updates",
- "managedGooglePlay": "Managed Google Play",
- "msfb": "Microsoft Store for Business",
- "myPermissions": "My permissions",
- "notifications": "Notifications",
- "officeApps": "Office apps",
- "officeProPlusPolicies": "Policies for Office apps",
- "onPremise": "On Premise",
- "onPremisesConnector": "Exchange ActiveSync on-premises connector",
- "onPremisesDeviceAccess": "Exchange ActiveSync devices",
- "onPremisesManageAccess": "Exchange on-premises access",
- "outOfDateIosDevices": "Installation failures for iOS devices",
- "overview": "Overview",
- "partnerDeviceManagement": "Partner device management",
- "perUpdateRingDeploymentState": "Per update ring deployment state",
- "permissions": "Permissions",
- "platformApps": "{0} apps",
- "platformDevices": "{0} devices",
- "platformEnrollment": "{0} enrollment",
- "policies": "Policies",
- "profiles": "Profiles",
- "properties": "Properties",
- "reports": "Reports",
- "retireNoncompliantDevices": "Retire noncompliant devices",
- "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
- "role": "Role",
- "scriptManagement": "Scripts",
- "securityBaselines": "Security baselines",
- "serviceToServiceConnector": "Exchange online connector",
- "servicenowConnector": "ServiceNow connector",
- "shellScripts": "Shell scripts",
- "teamViewerConnector": "TeamViewer connector",
- "telecomeExpenseManagement": "Telecom expense management",
- "tenantAdmin": "Tenant admin",
- "tenantAdministration": "Tenant administration",
- "termsAndConditions": "Terms and conditions",
- "titles": "Titles",
- "troubleshoot": "Troubleshoot",
- "troubleshootSupport": "Troubleshooting + support",
- "user": "User",
- "userExecutionStatus": "User status",
- "wdacSupplementalPolicies": "S mode supplemental policies",
- "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
- "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
- "windows10DriverUpdate": "Driver updates for Windows 10 and later",
- "windows10QualityUpdate": "Quality updates for Windows 10 and later",
- "windows10UpdateRings": "Update rings for Windows 10 and later",
- "windows10XPolicyFailures": "Windows 10X policy failures",
- "windows365PartnerConnector": "Windows 365 partner connectors",
- "windowsDiagnosticData": "Windows data",
- "windowsEnterpriseCertificate": "Windows enterprise certificate",
- "windowsManagement": "Scripts",
- "windowsSideLoadingKeys": "Windows side loading keys",
- "windowsSymantecCertificate": "Windows DigiCert certificate",
- "windowsThreatReport": "Threat agent status"
- },
- "ScopeTypes": {
- "allDevices": "All Devices",
- "allUsers": "All Users",
- "allUsersAndDevices": "All Users & All Devices",
- "selectedGroups": "Selected Groups"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search as default",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype for Business",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone and iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Not supported",
+ "supportEnding": "Support ending",
+ "supported": "Supported"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Default",
- "header": "Update Priority",
- "postponed": "Postponed",
- "priority": "High Priority"
- },
- "AutoUpdateSupersededApps": {
- "label": "Auto-update",
- "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Allow user to snooze the restart notification",
- "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
- "durationInMinutes": "Device restart grace period (minutes)",
- "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Time zone",
- "local": "Device time zone",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Date and time",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
- "deadlineTimeLabel": "App installation deadline",
- "defaultTime": "As soon as possible",
- "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
- "specificTime": "A specific date and time",
- "startTimeColumnLabel": "Availability",
- "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
- "startTimeLabel": "App availability"
- },
- "restartGracePeriodHeader": "Restart grace period",
- "restartGracePeriodLabel": "Device restart grace period",
- "summaryTitle": "End user experience"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "The file or folder as the selected requirement.",
- "pathToolTip": "The complete path of the file or folder to detect.",
- "property": "Property",
- "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
- },
- "GridColumns": {
- "pathOrScript": "Path/Script",
- "type": "Type"
- },
- "Registry": {
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the comparison.",
- "registryRequirement": "Registry key requirement",
- "registryRequirementTooltip": "Select the registry key requirement comparison.",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the required registry value."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Automatically approve all recommended driver updates",
+ "manual": "Manually approve and deploy driver updates"
+ },
+ "BulkActions": {
+ "button": "Bulk actions"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Approval method:"
},
- "RequirementTypeOptions": {
- "fileType": "File",
- "registry": "Registry",
- "script": "Script"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Boolean",
- "dateTime": "Date and Time",
- "float": "Floating Point",
- "integer": "Integer",
- "string": "String",
- "version": "Version"
- },
- "duplicateName": "Script name {0} has already been used. Please enter a different name.",
- "enforceSignatureCheck": "Enforce script signature check",
- "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
- "loggedOnCredentials": "Run this script using the logged on credentials",
- "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
- "operatorTooltip": "Select the operator for the requirement comparison.",
- "requirementMethod": "Select output data type",
- "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
- "scriptName": "Script name",
- "value": "Value",
- "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ "DeploymentDeferralInDays": {
+ "label": "Make updates available after",
+ "units": "(days)",
+ "value": "{0} days"
+ },
+ "DriverAction": {
+ "header": "Select an action below.",
+ "label": "Driver action",
+ "placeholder": "Select an action"
},
- "bladeTitle": "Add a Requirement rule",
- "createRequirementHeader": "Create a requirement.",
- "header": "Configure additional requirement rules",
- "label": "Additional requirement rules",
- "noRequirementsSelectedPlaceholder": "No requirements are specified.",
- "requirementType": "Requirement type",
- "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
- },
- "architectures": "Operating system architecture",
- "architecturesTooltip": "Choose the architectures needed to install the app.",
- "bladeTitle": "Requirements",
- "diskSpace": "Disk space required (MB)",
- "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
- "header": "Specify the requirements that devices must meet before the app is installed:",
- "maximumTextFieldValue": "The value must be at most {0}.",
- "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
- "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
- "minimumLogicalProcessors": "Minimum number of logical processors required",
- "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
- "minimumOperatingSystem": "Minimum operating system",
- "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
- "minumumTextFieldValue": "The value must be at least {0}.",
- "physicalMemory": "Physical memory required (MB)",
- "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
- "selectorLabel": "Requirements",
- "validNumber": "Please enter a valid number."
- },
- "PolicySet": {
- "appManagement": "Application management",
- "assignments": "Assignments",
- "basics": "Basics",
- "deviceEnrollment": "Device enrollment",
- "deviceManagement": "Device management",
- "scopeTags": "Scope tags",
- "appConfigurationTitle": "App configuration policies",
- "appProtectionTitle": "App protection policies",
- "appTitle": "Apps",
- "iOSAppProvisioningTitle": "iOS app provisioning profiles",
- "deviceLimitRestrictionTitle": "Device limit restrictions",
- "deviceTypeRestrictionTitle": "Device type restrictions",
- "enrollmentStatusSettingTitle": "Enrollment status pages",
- "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
- "deviceComplianceTitle": "Device compliance policies",
- "deviceConfigurationTitle": "Device configuration profiles",
- "powershellScriptTitle": "Powershell scripts"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Included drivers"
+ },
+ "SelectDrivers": {
+ "header": "Select drivers to include in your bulk action"
+ },
+ "SelectDriversToInclude": {
+ "button": "Select drivers to include"
+ },
+ "SelectLessDrivers": {
+ "validation": "At most one hundred drivers can be selected"
+ },
+ "SelectMoreDrivers": {
+ "validation": "At least one driver should be selected"
+ },
+ "SelectedDrivers": {
+ "label": "Selected drivers"
+ },
+ "availabilityDate": "Make available in Windows Update",
+ "bladeTitle": "Driver updates Windows 10 and later (preview)",
+ "lastSync": "Last sync:",
+ "lastSyncDefaultText": "Pending initial inventory collection",
+ "loadError": "Loading failed!"
+ },
+ "DriverStatus": {
+ "approved": "Approved",
+ "declined": "Declined",
+ "export": "Exporting recommended drivers",
+ "needsReview": "Needs review",
+ "paused": "Paused"
+ },
+ "DriversToReview": {
+ "text": "{0} to review"
+ },
+ "Subtitle": {
+ "automatic": "Automatic approval driver update policy",
+ "manual": "Manual approval driver update policy"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Recommended",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrain",
- "countryNameZA": "South Africa",
- "countryNameJO": "Jordan",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Czech Republic",
- "countryNameLT": "Lithuania",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hong Kong SAR",
- "countryNameGH": "Ghana",
- "countryNameSA": "Saudi Arabia",
- "countryNamePG": "Papua New Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "India",
- "countryNameHN": "Honduras",
- "countryNameRO": "Romania",
- "countryNameKZ": "Kazakhstan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Georgia",
- "countryNameTT": "Trinidad and Tobago",
- "countryNameMP": "Northern Mariana Islands",
- "countryNameMV": "Maldives",
- "countryNameFI": "Finland",
- "countryNameNO": "Norway",
- "countryNameEE": "Estonia",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Uzbekistan",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tajikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "France",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italy",
- "countryNameAZ": "Azerbaijan",
- "countryNameKG": "Kyrgyzstan",
- "countryNameWF": "Wallis and Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falkland Islands (Islas Malvinas)",
- "countryNameGY": "Guyana",
- "countryNameSS": "South Sudan",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Syria",
- "countryNameMD": "Moldova",
- "countryNameVC": "Saint Vincent and the Grenadines",
- "countryNameID": "Indonesia",
- "countryNameRE": "Reunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "North Macedonia",
- "countryNameTG": "Togo",
- "countryNamePF": "French Polynesia",
- "countryNameKY": "Cayman Islands",
- "countryNameIO": "British Indian Ocean Territory",
- "countryNameRU": "Russia",
- "countryNameMA": "Morocco",
- "countryNameAU": "Australia",
- "countryNameBO": "Bolivia",
- "countryNameVA": "Holy See (Vatican City State)",
- "countryNameVG": "Virgin Islands, British",
- "countryNameFM": "Micronesia",
- "countryNameAQ": "Antarctica",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brazil",
- "countryNameIS": "Iceland",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgaria",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamas, The",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macao SAR",
- "countryNameRW": "Rwanda",
- "countryNameAS": "American Samoa",
- "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
- "countryNameMF": "Saint Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "New Caledonia",
- "countryNameAC": "Ascension Island",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladesh",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Canada",
- "countryNameSH": "Saint Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolia",
- "countryNamePA": "Panama",
- "countryNameCM": "Cameroon",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japan",
- "countryNameCY": "Cyprus",
- "countryNameCD": "Democratic Republic of Congo",
- "countryNameTN": "Tunisia",
- "countryNameTR": "Türkiye",
- "countryNameWS": "Samoa",
- "countryNameSE": "Sweden",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Cambodia",
- "countryNamePL": "Poland",
- "countryNameDZ": "Algeria",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominica",
- "countryNameEG": "Egypt",
- "countryNameGF": "French Guiana",
- "countryNameNZ": "New Zealand",
- "countryNamePS": "Palestinian Authority",
- "countryNameIL": "Israel",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Greece",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauritania",
- "countryNameVI": "Virgin Islands, U.S.",
- "countryNameGQ": "Equatorial Guinea",
- "countryNameMX": "Mexico",
- "countryNameDJ": "Djibouti",
- "countryNameGN": "Guinea",
- "countryNameCN": "China",
- "countryNameMZ": "Mozambique",
- "countryNameBV": "Bouvet Island",
- "countryNameNF": "Norfolk Island",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "South Georgia and the South Sandwich Islands",
- "countryNameRS": "Serbia",
- "countryNameCC": "Cocos (Keeling) Islands",
- "countryNameNA": "Namibia",
- "countryNameDE": "Germany",
- "countryNameCG": "Republic of Congo",
- "countryNameKW": "Kuwait",
- "countryNameMH": "Marshall Islands",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarus",
- "countryNameMY": "Malaysia",
- "countryNameST": "São Tomé and Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Chad",
- "countryNameCX": "Christmas Island",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bissau",
- "countryNameUA": "Ukraine",
- "countryNameCU": "Cuba",
- "countryNameCO": "Colombia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Croatia",
- "countryNameSC": "Seychelles",
- "countryNameNL": "Netherlands",
- "countryNameUM": "US Minor Outlying Islands",
- "countryNameIM": "Isle of Man",
- "countryNameFJ": "Fiji",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "United Kingdom",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovenia",
- "countryNameAM": "Armenia",
- "countryNameAR": "Argentina",
- "countryNamePM": "Saint Pierre and Miquelon",
- "countryNameTF": "French Southern and Antarctic Lands",
- "countryNameDO": "Dominican Republic",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugal",
- "countryNameCF": "Central African Republic",
- "countryNameBE": "Belgium",
- "countryNameKM": "Comoros",
- "countryNameLY": "Libya",
- "countryNameIE": "Ireland",
- "countryNameKP": "North Korea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slovakia",
- "countryNameTC": "Turks and Caicos Islands",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Yemen",
- "countryNameBA": "Bosnia and Herzegovina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Iraq",
- "countryNameSJ": "Svalbard and Jan Mayen Island",
- "countryNameAX": "Åland Islands",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Faroe Islands",
- "countryNameBL": "Saint Barthélemy",
- "countryNameLB": "Lebanon",
- "countryNameJM": "Jamaica",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Spain",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapore",
- "countryNameAL": "Albania",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d’Ivoire",
- "countryNameTW": "Taiwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cook Islands",
- "countryNameTH": "Thailand",
- "countryNameHM": "Heard Island and McDonald Islands",
- "countryNameGD": "Grenada",
- "countryNameUS": "United States",
- "countryNameAT": "Austria",
- "countryNameKR": "Korea, Republic of",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Denmark",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Ethiopia",
- "countryNameMG": "Madagascar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxembourg",
- "countryNameQA": "Qatar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Solomon Islands",
- "countryNameAE": "United Arab Emirates",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua and Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Hungary",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Switzerland",
- "countryNamePN": "Pitcairn Islands",
- "countryNameGL": "Greenland",
- "countryNamePH": "Philippines",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts and Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Latvia",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "Unable to sync {0}",
+ "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
+ "pending": "{0} sync in progress",
+ "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
+ "success": "{0} sync complete",
+ "successDescription": "Sync with WUfB service completed at {0}"
+ },
+ "SyncSpinner": {
+ "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
+ },
+ "TabName": {
+ "basics": "Basics",
+ "driverUpdateSettings": "Settings",
+ "otherDrivers": "Other drivers",
+ "properties": "Properties",
+ "recommendedDrivers": "Recommended drivers"
+ },
+ "driverAddFilter": "Add filter",
+ "driverApplicableDevices": "Applicable devices",
+ "driverApprovalStatus": "Status",
+ "driverBulkActions": "Bulk actions",
+ "driverClass": "Driver class",
+ "driverCount": "Showing {0} to {1} of {2} records",
+ "driverFilterNoneSelected": "None selected",
+ "driverManufacturer": "Manufacturer",
+ "driverName": "Driver name",
+ "driverNameLower": "windows driver update deployment",
+ "driverNameUpper": "Windows driver update deployment",
+ "driverRefresh": "Refresh",
+ "driverReleaseDate": "Release date",
+ "driverSearch": "Search",
+ "driverSearchKeyword": "Enter search keyword",
+ "driverVersion": "Version",
+ "firstDeploymentDate": "First Deployment",
+ "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
+ "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge configuration settings",
+ "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
+ "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
+ "generalAppConfig": "General app configuration",
+ "generalSettings": "General configuration settings",
+ "outlookSMIMEConfig": "Outlook S/MIME settings",
+ "outlookSettings": "Outlook configuration settings",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-es.json b/Documentation/Strings-es.json
index 930a5a9..6bf7d56 100644
--- a/Documentation/Strings-es.json
+++ b/Documentation/Strings-es.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Configuración de protección de datos"
- },
- "OrganizeMailByThread": {
- "title": "Organizar correo por hilo",
- "tooltip": "El comportamiento predeterminado de Outlook es empaquetar conversaciones de correo en una vista de conversación con hilos. Si esta opción está deshabilitada, Outlook mostrará cada correo electrónico por separado y no los agrupará por hilos."
- },
- "Sync": {
- "header": "Configuración de la aplicación para la sincronización de campos de los contactos con los contactos nativos"
- },
- "allowBiometricsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
- "allowBiometricsTitle": "Requerir información biométrica para acceder a la aplicación",
- "allowBiometricsTooltip": "Puede que se requiera información biométrica (como TouchID o FaceID) para el acceso de los usuarios a la aplicación en su dispositivo. En caso de requerirse, dicha información se usa junto con el método de autenticación seleccionado en el perfil. Esta configuración no debe habilitarse si se han implementado directivas de protección de aplicaciones de Intune, ya que estas incluyen requisitos para el acceso a los datos administrados. Si se habilitan ambas opciones, se producirán múltiples solicitudes de acceso para Outlook Mobile. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como desactivada.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
- "allowCalendarNotificationsTitle": "Notificaciones de calendario",
- "allowCalendarNotificationsTooltip": "Permitir que las notificaciones del calendario muestren los detalles completos cuando la configuración de directiva de App Protection \"Notificaciones de datos de la organización\" esté establecida en \"Bloquear datos de la organización\".",
- "allowDefaultAppSignatureTitle": "Firma de aplicación predeterminada",
- "allowDefaultAppSignatureTooltip": "La firma de aplicación predeterminada indica si la aplicación usará \\\"Obtener Outlook para iOS\\\" como firma predeterminada durante la composición del mensaje. Si la configuración está desactivada, no se usará la firma predeterminada. Sin embargo, los usuarios pueden agregar su propia firma. Cuando se establece como Sin configurar, la configuración de aplicación predeterminada se establece en Activado.",
- "allowExternalRecipientsMailTipTitle": "Información sobre correo de destinatarios externos",
- "allowExternalRecipientsMailTipTooltip": "La opción Información sobre correo de destinatarios externos aparece si el remitente agrega un destinatario externo o un grupo de distribución que contiene destinatarios externos. Esta información de correo electrónico indica a los remitentes si el mensaje que redactan va a salir de la organización, lo que les ayuda a tomar las decisiones correctas respecto al lenguaje, tono y contenido. Disponible solo para las cuentas de Exchange Online y las cuentas locales que usan la autenticación moderna híbrida. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada.",
- "allowFocusedInboxTitle": "Bandeja de entrada Prioritarios",
- "allowFocusedInboxTooltip": "La Bandeja de entrada Prioritarios separa la bandeja de entrada en dos pestañas: Prioritarios y Otros. Los correos electrónicos más importantes están en la pestaña Prioritarios y el resto en la pestaña Otros, con acceso fácil pero por separado. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada.",
- "allowMailNotificationsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
- "allowMailNotificationsTitle": "Notificaciones de correo",
- "allowMailNotificationsTooltip": "Este valor especifica si Outlook permite notificaciones por correo electrónico. Si se establece en No, se deshabilitan las notificaciones por correo electrónico.",
- "allowOrgDataOnWearablesTitle": "Datos de la organización en dispositivos ponibles",
- "allowOrgDataOnWearablesTooltip": "Este valor especifica si se pueden sincronizar datos de Outlook en un dispositivo ponible. Si se establece en No, se deshabilita la sincronización en dispositivos ponibles.",
- "allowSaveContactsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración de sincronización de contactos.",
- "allowSaveContactsTitle": "Guardar contactos",
- "allowSaveContactsTooltip": "Al guardar contactos en la libreta de direcciones nativa del dispositivo móvil, se pueden vincular las llamadas y mensajes de texto nuevos a los contactos de Outlook existentes del usuario. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como desactivada.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
- "allowSmartReplyTitle": "Respuestas sugeridas",
- "allowSmartReplyTooltip": "Al abrir un mensaje, Outlook puede sugerir respuestas debajo de este. Si selecciona una de las respuestas sugeridas, puede editarla antes de enviarla. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada.",
- "allowUserChangeGeneralToolTip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
- "allowUserChangeTitle": "Permitir que el usuario cambie la configuración",
- "blockExternalImagesAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
- "blockExternalImagesTitle": "Bloquear imágenes externas",
- "blockExternalImagesTooltip": "Cuando el bloqueo de imágenes externas está habilitado, la aplicación impide la descarga de imágenes hospedadas en Internet que están insertadas en el cuerpo del mensaje. Si se establece como no configurado, la aplicación establece el valor Desactivado de forma predeterminada.",
- "disableAddinsTitle": "Uso permitido de complementos",
- "disableAddinsTooltip": "De forma predeterminada, una directiva de protección de aplicaciones permite a los usuarios usar complementos de terceros, pero se puede usar para bloquear complementos con la configuración \"Sincronizar datos de aplicaciones administradas por directivas con complementos o aplicaciones nativas\". Si estableciera esta opción en \"Desactivado\", se bloquearán los complementos cuando la configuración de la directiva de protección de aplicaciones esté establecida en Permitida.",
- "discoverFeedTitle": "Fuente de detección",
- "discoverFeedTooltip": "Fuente de detección destaca los archivos de Office a los que accede con más frecuencia. Esta fuente se habilita de forma predeterminada si Delve está habilitado para el usuario. Si está sin configurar, la configuración de la aplicación predeterminada se establece como Activa.",
- "enableSMIMETitle": "Habilitar S/MIME",
- "enableSMIMETooltip": "Especifique si los controles S/MIME se habilitan o no al redactar un correo electrónico.",
- "encryptAllEmails": "Cifrar todos los correos electrónicos",
- "encryptAllEmailsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar el valor Cifrar todos los correos electrónicos.",
- "encryptAllEmailsTooltip": "Especifique si se deben cifrar todos los mensajes de correo electrónico. El cifrado convierte los datos en texto cifrado para que solo el destinatario deseado pueda leerlos.",
- "ldapUrl": "DIRECCIÓN URL DE LDAP",
- "ldapUrlTooltip": "Este es el nombre de host de LDAP en el que los clientes pueden obtener las claves de cifrado públicas para los destinatarios de correo electrónico. Los correos electrónicos se cifrarán cuando haya una clave disponible. Formatos admitidos: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
- "nativeCalendarSyncMAMOnlyTitle": "Permitir sincronización de calendarios",
- "nativeCalendarSyncMAMOnlyTooltip": "De forma predeterminada, una directiva de protección de aplicaciones permite la sincronización del calendario con la aplicación Calendario nativa, pero se puede usar para bloquear la disponibilidad de sincronización del calendario. Esta configuración funciona con independencia de la configuración de la directiva de protección de aplicaciones y permite a las organizaciones definir si la sincronización del calendario está disponible para la cuenta profesional o educativa.",
- "nativeCalendarSyncTitle": "Sincronizar calendarios",
- "nativeCalendarSyncTooltip": "De forma predeterminada, una directiva de protección de aplicaciones permite la sincronización del calendario con la aplicación Calendario nativa, pero se puede usar para bloquear la disponibilidad de sincronización del calendario con la configuración \"Sincronizar datos de aplicaciones administradas por la directiva con complementos o aplicaciones nativas\". Si estableciera esta opción en \"Desactivado\", se bloqueará la sincronización del calendario cuando la configuración de la directiva de protección de aplicaciones esté establecida en Permitida.",
- "playMyEmailsTitle": "Reproducir mis correos electrónicos",
- "playMyEmailsTooltip": "La característica Reproducir mis correos electrónicos no está habilitada de forma predeterminada en la aplicación, pero se promueve a los usuarios aptos mediante un banner en la bandeja de entrada. Si se establece en Desactivada, no se promociona a los usuarios aptos en la aplicación. Los usuarios pueden optar por habilitar manualmente Reproducir mis correos electrónicos desde la propia aplicación, aunque la característica esté establecida como Desactivada. Si se establece como Sin configurar, la configuración predeterminada de la aplicación es Activada y la característica se promoverá a los usuarios aptos.",
- "signAllEmails": "Firmar todos los correos electrónicos",
- "signAllEmailsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar el valor Firmar todos los correos electrónicos.",
- "signAllEmailsTooltip": "Especifique si se deben firmar todos los mensajes de correo electrónico. Con la firma digital se comprueba la autenticidad del correo electrónico y se garantiza que el contenido no se haya alterado en tránsito.",
- "syncAddressTitle": "Dirección",
- "syncAddressTooltip": "Este valor especifica si la dirección del contacto debe sincronizarse con los contactos nativos.",
- "syncBirthdayTitle": "Cumpleaños",
- "syncBirthdayTooltip": "Este valor especifica si el cumpleaños del contacto debe sincronizarse con los contactos nativos.",
- "syncCompanyTitle": "Compañía",
- "syncCompanyTooltip": "Este valor especifica si el nombre de la empresa del contacto debe sincronizarse con los contactos nativos.",
- "syncDepartmentTitle": "Departamento",
- "syncDepartmentTooltip": "Este valor especifica si el departamento del contacto debe sincronizarse con los contactos nativos.",
- "syncEmailAddressTitle": "Dirección de correo electrónico",
- "syncEmailAddressTooltip": "Este valor especifica si la dirección de correo electrónico del contacto debe sincronizarse con los contactos nativos.",
- "syncInstantMessagingAddressTitle": "Dirección de mensajería instantánea",
- "syncInstantMessagingAddressTooltip": "Este valor especifica si la dirección de mensajería instantánea del contacto debe sincronizarse con los contactos nativos.",
- "syncJobTitleTitle": "Puesto",
- "syncJobTitleTooltip": "Este valor especifica si el puesto del contacto debe sincronizarse con los contactos nativos.",
- "syncNicknameTitle": "Alias",
- "syncNicknameTooltip": "Este valor especifica si el alias del contacto debe sincronizarse con los contactos nativos.",
- "syncNotesTitle": "Notes",
- "syncNotesTooltip": "Este valor especifica si las notas del contacto deben sincronizarse con los contactos nativos.",
- "syncPhoneHomeFaxNumberTitle": "Número de fax particular",
- "syncPhoneHomeFaxNumberTooltip": "Este valor especifica si el número de fax particular del contacto debe sincronizarse con los contactos nativos.",
- "syncPhoneHomeNumberTitle": "Número de teléfono particular",
- "syncPhoneHomeNumberTooltip": "Este valor especifica si el número de teléfono particular del contacto debe sincronizarse con los contactos nativos.",
- "syncPhoneMobileNumberTitle": "Número de teléfono móvil",
- "syncPhoneMobileNumberTooltip": "Este valor especifica si el número de teléfono móvil del contacto debe sincronizarse con los contactos nativos.",
- "syncPhoneOtherNumberTitle": "Otro número de teléfono",
- "syncPhoneOtherNumberTooltip": "Este valor especifica si el otro número de teléfono del contacto debe sincronizarse con los contactos nativos.",
- "syncPhonePagerNumberTitle": "Número de buscapersonas",
- "syncPhonePagerNumberTooltip": "Este valor especifica si el número de buscapersonas del contacto debe sincronizarse con los contactos nativos.",
- "syncPhoneWorkFaxNumberTitle": "Número de fax del trabajo",
- "syncPhoneWorkFaxNumberTooltip": "Este valor especifica si el número de fax del trabajo del contacto debe sincronizarse con los contactos nativos.",
- "syncPhoneWorkNumberTitle": "Número de teléfono del trabajo",
- "syncPhoneWorkNumberTooltip": "Este valor especifica si el número de teléfono del trabajo debe sincronizarse con los contactos nativos.",
- "syncPrefixTitle": "Prefijo del nombre",
- "syncPrefixTooltip": "Este valor especifica si el prefijo del nombre del contacto debe sincronizarse con los contactos nativos.",
- "syncSuffixTitle": "Sufijo del nombre",
- "syncSuffixTooltip": "Este valor especifica si el sufijo del nombre del contacto debe sincronizarse con los contactos nativos.",
- "textPredictionsTitle": "Predicciones de texto",
- "textPredictionsTooltip": "Outlook puede sugerir palabras y frases al redactar mensajes. Cuando Outlook ofrezca una sugerencia, deslice rápidamente el dedo para aceptarla. Cuando se define como no configurada, la configuración de la aplicación predeterminada se establece en Activada.",
- "themesEnabledTitle": "Temas habilitados",
- "themesEnabledTooltip": "Especifique si el usuario puede usar un tema visual personalizado."
- },
- "Languages": {
- "ar-aE": "Árabe (Emiratos Árabes Unidos)",
- "ar-bH": "Árabe (Baréin)",
- "ar-dZ": "Árabe (Argelia)",
- "ar-eG": "Árabe (Egipto)",
- "ar-iQ": "Árabe (Irak)",
- "ar-jO": "Árabe (Jordania)",
- "ar-kW": "Árabe (Kuwait)",
- "ar-lB": "Árabe (Líbano)",
- "ar-lY": "Árabe (Libia)",
- "ar-mA": "Árabe (Marruecos)",
- "ar-oM": "Árabe (Omán)",
- "ar-qA": "Árabe (Qatar)",
- "ar-sA": "Árabe (Arabia Saudí)",
- "ar-sY": "Árabe (Siria)",
- "ar-tN": "Árabe (Túnez)",
- "ar-yE": "Árabe (Yemen)",
- "az-cyrl": "Azerbaiyano (cirílico, Azerbaiyán)",
- "az-latn": "Azerbaiyano (latino, Azerbaiyán)",
- "bn-bD": "Bengalí (Bangladés)",
- "bn-iN": "Bengalí (India)",
- "bs-cyrl": "Bosnio (cirílico)",
- "bs-latn": "Bosnio (latino)",
- "zh-cN": "Chino (RPC)",
- "zh-hK": "Chino (RAE de Hong Kong)",
- "zh-mO": "Chino (RAE de Macao)",
- "zh-sG": "Chino (Singapur)",
- "zh-tW": "Chino (Taiwán)",
- "hr-bA": "Croata (latino)",
- "hr-hR": "Croata (Croacia)",
- "nl-bE": "Neerlandés (Bélgica)",
- "nl-nL": "Neerlandés (Países Bajos)",
- "en-aU": "Inglés (Australia)",
- "en-bZ": "Inglés (Belice)",
- "en-cA": "Inglés (Canadá)",
- "en-cabn": "Inglés (Caribe)",
- "en-iE": "Inglés (Irlanda)",
- "en-iN": "Inglés (India)",
- "en-jM": "Inglés (Jamaica)",
- "en-mY": "Inglés (Malasia)",
- "en-nZ": "Inglés (Nueva Zelanda)",
- "en-pH": "Inglés (Filipinas)",
- "en-sG": "Inglés (Singapur)",
- "en-tT": "Inglés (Trinidad y Tobago)",
- "en-uK": "Inglés (Reino Unido)",
- "en-uS": "Inglés (Estados Unidos)",
- "en-zA": "Inglés (Sudáfrica)",
- "en-zW": "Inglés (Zimbabue)",
- "fr-bE": "Francés (Bélgica)",
- "fr-cA": "Francés (Canadá)",
- "fr-cH": "Francés (Suiza)",
- "fr-fR": "Francés (Francia)",
- "fr-lU": "Francés (Luxemburgo)",
- "fr-mC": "Francés (Mónaco)",
- "de-aT": "Alemán (Austria)",
- "de-cH": "Alemán (Suiza)",
- "de-dE": "Alemán (Alemania)",
- "de-lI": "Alemán (Liechtenstein)",
- "de-lU": "Alemán (Luxemburgo)",
- "iu-cans": "Inuktitut (silábico, Canadá)",
- "iu-latn": "Inuktitut (latino, Canadá)",
- "it-cH": "Italiano (Suiza)",
- "it-iT": "Italiano (Italia)",
- "ms-bN": "Malayo (Brunéi Darussalam)",
- "ms-mY": "Malayo (Malasia)",
- "mn-cN": "Mongol (mongol tradicional, RPC)",
- "mn-mN": "Mongol (cirílico, Mongolia)",
- "no-nB": "Noruego (Bokmål, Noruega)",
- "no-nn": "Noruego, Nynorsk (Noruega)",
- "pt-bR": "Portugués (Brasil)",
- "pt-pT": "Portugués (Portugal)",
- "quz-bO": "Quechua (Bolivia)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Perú)",
- "smj-nO": "Sami lule (Noruega)",
- "smj-sE": "Sami lule (Suecia)",
- "se-fI": "Sami, septentrional (Finlandia)",
- "se-nO": "Sami, septentrional (Noruega)",
- "se-sE": "Sami septentrional (Suecia)",
- "sma-nO": "Sami, meridional (Noruega)",
- "sma-sE": "Sami, meridional (Suecia)",
- "smn": "Sami, inari (Finlandia)",
- "sms": "Sami, skolt (Finlandia)",
- "sr-Cyrl-bA": "Serbio (cirílico)",
- "sr-Cyrl-rS": "Serbio (cirílico, antigua Serbia y Montenegro)",
- "sr-Latn-bA": "Serbio (latino)",
- "sr-Latn-rS": "Serbio (latino, Serbia)",
- "dsb": "Bajo sorbio (Alemania)",
- "hsb": "Alto sorbio (Alemania)",
- "es-es-tradnl": "Español (España, alfabetización tradicional)",
- "es-aR": "Español (Argentina)",
- "es-bO": "Español (Bolivia)",
- "es-cL": "Español (Chile)",
- "es-cO": "Español (Colombia)",
- "es-cR": "Español (Costa Rica)",
- "es-dO": "Español (República Dominicana)",
- "es-eC": "Español (Ecuador)",
- "es-eS": "Español (España)",
- "es-gT": "Español (Guatemala)",
- "es-hN": "Español (Honduras)",
- "es-mX": "Español (México)",
- "es-nI": "Español (Nicaragua)",
- "es-pA": "Español (Panamá)",
- "es-pE": "Español (Perú)",
- "es-pR": "Español (Puerto Rico)",
- "es-pY": "Español (Paraguay)",
- "es-sV": "Español (El Salvador)",
- "es-uS": "Español (Estados Unidos)",
- "es-uY": "Español (Uruguay)",
- "es-vE": "Español (Venezuela)",
- "sv-fI": "Sueco (Finlandia)",
- "uz-cyrl": "Uzbeko (cirílico, Uzbekistán)",
- "uz-latn": "Uzbeko (Latino, Uzbekistán)",
- "af": "Afrikáans (Sudáfrica)",
- "sq": "Albanés (Albania)",
- "am": "Amárico (Etiopía)",
- "hy": "Armenio (Armenia)",
- "as": "Asamés (India)",
- "ba": "Baskir (Rusia)",
- "eu": "Euskera (euskera)",
- "be": "Bielorruso (Belarús)",
- "br": "Bretón (Francia)",
- "bg": "Búlgaro (Bulgaria)",
- "ca": "Catalán (Catalán)",
- "co": "Corso (Francia)",
- "cs": "Checo (República Checa)",
- "da": "Danés (Dinamarca)",
- "dv": "Divehi (Maldivas)",
- "et": "Estonio (Estonia)",
- "fo": "Feroés (Islas Feroe)",
- "fil": "Filipino (Filipinas)",
- "fi": "Finés (Finlandia)",
- "gl": "Gallego (gallego)",
- "ka": "Georgiano (Georgia)",
- "el": "Griego (Grecia)",
- "gu": "Guyaratí (India)",
- "ha": "Hausa (latino, Nigeria)",
- "he": "Hebreo (Israel)",
- "hi": "Hindi (India)",
- "hu": "Húngaro (Hungría)",
- "is": "Islandés (Islandia)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonesio (Indonesia)",
- "ga": "Irlandés (Irlanda)",
- "xh": "Xhosa (Sudáfrica)",
- "zu": "Zulú (Sudáfrica)",
- "ja": "Japonés (Japón)",
- "kn": "Canarés (India)",
- "kk": "Kazajo (Kazajistán)",
- "km": "Jemer (Camboya)",
- "rw": "Kinyarwanda (Ruanda)",
- "sw": "Suajili (Kenia)",
- "kok": "Konkani (India)",
- "ko": "Coreano (Corea del Sur)",
- "ky": "Kirguís (Kirguistán)",
- "lo": "Lao (R.D.P. de Laos)",
- "lv": "Letón (Letonia)",
- "lt": "Lituano (Lituania)",
- "lb": "Luxemburgués (Luxemburgo)",
- "mk": "Macedonio (Macedonia del Norte)",
- "ml": "Malayálam (India)",
- "mt": "Maltés (Malta)",
- "mi": "Maorí (Nueva Zelanda)",
- "mr": "Maratí (India)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepalí (Nepal)",
- "oc": "Occitano (Francia)",
- "or": "Odia (India)",
- "ps": "Pastún (Afganistán)",
- "fa": "Persa",
- "pl": "Polaco (Polonia)",
- "pa": "Punyabí (India)",
- "ro": "Rumano (Rumanía)",
- "rm": "Romanche (Suiza)",
- "ru": "Ruso (Rusia)",
- "sa": "Sánscrito (India)",
- "st": "Sotho septentrional (Sudáfrica)",
- "tn": "Setsuana (Sudáfrica)",
- "si": "Cingalés (Sri Lanka)",
- "sk": "Eslovaco (Eslovaquia)",
- "sl": "Esloveno (Eslovenia)",
- "sv": "Sueco (Suecia)",
- "syr": "Sirio (Siria)",
- "tg": "Tayiko (cirílico, Tayikistán)",
- "ta": "Tamil (India)",
- "tt": "Tártaro (Rusia)",
- "te": "Telugu (India)",
- "th": "Tailandés (Tailandia)",
- "bo": "Tibetano (RPC)",
- "tr": "Turco (Turquía)",
- "tk": "Turcomano (Turkmenistán)",
- "uk": "Ucraniano (Ucrania)",
- "ur": "Urdú (Pakistán)",
- "vi": "Vietnamita (Vietnam)",
- "cy": "Galés (Reino Unido)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (RPC)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender for Endpoint",
- "androidDeviceOwnerApplications": "Aplicaciones",
- "androidDeviceOwnerPolicyMessages": "Información de soporte técnico personalizada",
- "androidForWorkPassword": "Contraseña del dispositivo",
- "appManagement": "Permitir o bloquear aplicaciones",
- "applicationGuard": "Protección de aplicaciones de Microsoft Defender",
- "applicationRestrictions": "Aplicaciones restringidas",
- "applicationVisibility": "Mostrar u ocultar aplicaciones",
- "applications": "Tienda de aplicaciones",
- "applicationsAndGames": "App Store, presentación de documentos, juegos",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Aplicaciones y experiencia",
- "associatedDomains": "Dominios asociados",
- "autonomousSingleAppMode": "Modo de aplicación única autónoma",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Cifrado de Windows",
- "bootOptions": "Opciones de arranque",
- "browser": "Explorador",
- "builtinApps": "Aplicaciones integradas",
- "cameras": "Cámaras",
- "cellular": "Red de telefonía móvil",
- "cloudAndStorage": "Nube y almacenamiento",
- "cloudPrint": "Impresora en la nube",
- "complianceEmailProfile": "Correo electrónico",
- "connectedDevices": "Dispositivos conectados",
- "connectivity": "Red de telefonía móvil y conectividad",
- "contentCaching": "Almacenamiento en caché de contenido",
- "controlPanelAndSettings": "Panel de control y Configuración",
- "credentialGuard": "Credential Guard de Microsoft Defender",
- "customCompliance": "Cumplimiento personalizado",
- "customConfiguration": "Perfil de configuración personalizada",
- "customOMASettings": "Configuración OMA-URI personalizada",
- "customPreferences": "Archivo de preferencias",
- "dFCISecuritySettings": "Configuración de seguridad",
- "defender": "Antivirus de Microsoft Defender",
- "defenderAntivirus": "Antivirus de Microsoft Defender",
- "defenderExploitGuard": "Protección contra vulnerabilidades de seguridad de Microsoft Defender",
- "defenderFirewall": "Firewall de Windows",
- "defenderLocalSecurityOptions": "Opciones de seguridad del dispositivo local",
- "defenderSecurityCenter": "Centro de seguridad de Microsoft Defender",
- "deliveryOptimization": "Optimización de entrega",
- "derivedCredentialAuthenticationConfiguration": "Credencial derivada",
- "deviceExperience": "Experiencia del dispositivo",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Control de aplicaciones de Microsoft Defender",
- "deviceHealth": "Estado de dispositivos",
- "devicePassword": "Contraseña del dispositivo",
- "deviceProperties": "Propiedades del dispositivo",
- "deviceRestrictions": "General",
- "deviceSecurity": "Seguridad del sistema",
- "display": "Mostrar",
- "domainJoin": "Unión a un dominio",
- "domains": "Dominios",
- "edgeBrowser": "Microsoft Edge (versión anterior), versión 45 y anteriores",
- "edgeBrowserSmartScreen": "SmartScreen de Microsoft Defender",
- "edgeKiosk": "Pantalla completa de Microsoft Edge",
- "editionUpgrade": "Actualización de edición",
- "education": "Educación",
- "educationDeviceCerts": "Certificados de dispositivo",
- "educationStudentCerts": "Certificados de alumno",
- "educationTakeATest": "Hacer un examen",
- "educationTeacherCerts": "Certificados de profesor",
- "emailProfile": "Correo electrónico",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Extensión de aplicación de inicio de sesión único",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Juegos",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Seguimiento de estado",
- "homeScreenLayout": "Diseño de pantalla principal",
- "iOSWallpaper": "Papel tapiz",
- "importedPFX": "Certificado PKCS importado",
- "iosDefenderAtp": "Microsoft Defender for Endpoint",
- "iosKiosk": "Pantalla completa",
- "kernelExtensions": "Extensiones de kernel",
- "keyboardAndDictionary": "Teclado y diccionario",
- "kiosk": "Pantalla completa",
- "kioskAndroidEnterprise": "Dispositivos dedicados",
- "kioskConfiguration": "Pantalla completa",
- "kioskConfigurationV2": "Pantalla completa",
- "kioskWebBrowser": "Kiosk Web Browser",
- "lockScreenMessage": "Mensaje de bloqueo de pantalla",
- "lockedScreenExperience": "Experiencia de pantalla de bloqueo",
- "logging": "Informes y telemetría",
- "loginItems": "Elementos de inicio de sesión",
- "loginWindow": "Ventana de inicio de sesión",
- "macDefenderAtp": "Microsoft Defender for Endpoint",
- "maintenance": "Mantenimiento",
- "malware": "Malware",
- "messaging": "Mensajería",
- "microphonesAndSpeakers": "Micrófonos y altavoces",
- "networkBoundary": "Límite de red",
- "networkProxy": "Proxy de red",
- "notifications": "Notificaciones de la aplicación",
- "pKCS": "Certificado PKCS",
- "password": "Contraseña",
- "personalProfile": "Perfil personal",
- "personalization": "Personalización",
- "policyOverride": "Reemplazar la directiva de grupo",
- "ports": "Puertos",
- "powerSettings": "Opciones de energía",
- "printer": "Impresora",
- "privacy": "Privacidad",
- "privacyPerApp": "Excepciones de privacidad por aplicación",
- "privacyPreferences": "Preferencias de privacidad",
- "projection": "Proyección",
- "radios": "Radios",
- "sCCMCompliance": "Cumplimiento de Configuration Manager",
- "sCEP": "Certificado SCEP",
- "sCEPProperties": "Certificado SCEP",
- "sMode": "Intercambiar modo (solo Windows Insider)",
- "safari": "Safari",
- "search": "Buscar",
- "session": "Sesión",
- "sharedDevice": "iPad compartido",
- "sharedPCAccountManager": "Dispositivo multiusuario compartido",
- "singleSignOn": "Inicio de sesión único",
- "smartScreen": "SmartScreen de Microsoft Defender",
- "softwareUpdates": "Configuración",
- "start": "Inicio",
- "systemExtensions": "Extensiones del sistema",
- "systemSecurity": "Seguridad del sistema",
- "trustedCert": "Certificado de confianza",
- "uEFIAccess": "Acceso a UEFI",
- "updates": "Actualizaciones",
- "userRights": "Derechos del usuario",
- "usersAndAccounts": "Usuarios y cuentas",
- "vPN": "VPN base",
- "vPNApps": "VPN automática",
- "vPNAppsAndTrafficRules": "Aplicaciones y reglas de tráfico",
- "vPNConditionalAccess": "Acceso condicional",
- "vPNConnectivity": "Conectividad",
- "vPNDNSTriggers": "Configuración DNS",
- "vPNIKEv2": "Configuración de IKEv2",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Túnel dividido",
- "vPNTrustedNetwork": "Detección de redes de confianza",
- "wakeSettings": "Configuración de reactivación",
- "webContentFilter": "Filtro de contenido web",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender for Endpoint",
- "windowsDefenderATP": "Microsoft Defender for Endpoint",
- "windowsHelloForBusiness": "Windows Hello para empresas",
- "windowsSpotlight": "Contenido destacado de Windows",
- "wiredNetwork": "Red cableada",
- "wireless": "Inalámbrica",
- "wirelessProjection": "Proyección inalámbrica",
- "workProfile": "Configuración del perfil profesional",
- "workProfilePassword": "Contraseña del perfil de trabajo",
- "xboxServices": "Servicios de Xbox",
- "zebraMx": "Perfil de MX (solo Zebra)",
- "complianceActionsLabel": "Acciones en caso de incumplimiento"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Descripción"
- },
- "FeatureDeploymentSettings": {
- "header": "Configuración de implementación de características"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Esta característica no puede degradar un dispositivo.",
- "label": "Actualización de características para implementar"
- },
- "GradualRolloutEndDate": {
- "label": "Disponibilidad del primer grupo"
- },
- "GradualRolloutInterval": {
- "label": "Días entre grupos"
- },
- "GradualRolloutStartDate": {
- "label": "Disponibilidad del primer grupo"
- },
- "Name": {
- "label": "Nombre"
- },
- "OptionalUpdate": {
- "label": "Actualización necesaria u opcional"
- },
- "RolloutOptions": {
- "label": "Opciones de lanzamiento"
- },
- "RolloutSettings": {
- "header": "¿Cuándo le gustaría que la actualización estuviera disponible en Windows Update?"
- },
- "ScopeSettings": {
- "header": "Configure etiquetas de ámbito para esta directiva."
- },
- "StartDateOnlyStartDate": {
- "label": "Primera fecha disponible"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Deshabilitado",
- "enabled": "Habilitado",
- "infoBalloonContent": "Controlar si se debe instalar la actualización de características de Windows 10 más reciente en los dispositivos que no cumplan los requisitos para Windows 11",
- "label": "Cuando un dispositivo no sea elegible para ejecutar Windows 11, instale la actualización de características de Windows 10 más reciente",
- "notApplicable": "No aplicable",
- "summaryLabel": "Instalar Windows 10 en dispositivos no aptos para ejecutar Windows 11"
- },
- "bladeTitle": "Implementaciones de actualización de características",
- "deploymentSettingsTitle": "Configuración de la implementación",
- "loadError": "Error al cargar.",
- "windows11EULA": "Al seleccionar esta actualización de características para implementar, acepta que al aplicar este sistema operativo a un dispositivo (1) la licencia de Windows correspondiente se adquirió a través de licencias por volumen o (2) que está autorizado para vincular a su organización y está aceptando en su nombre los Términos de licencia del software de Microsoft relevantes que encontrará aquí {0}."
- },
- "Notifications": {
- "deploymentSaved": "\"{0}\" se ha guardado.",
- "newFeatureUpdateDeploymentCreated": "Se ha creado una implementación de actualización de características."
- },
- "TabName": {
- "deploymentSettings": "Configuración de la implementación",
- "groupAssignmentSettings": "Asignaciones",
- "scopeSettings": "Etiquetas de ámbito"
- },
- "gradualRolloutLicenseWarning": "Esta funcionalidad requiere licencias específicas.",
- "gradualRolloutLicenseWarningEdit": "Esta funcionalidad se puede seguir usando y configurando hasta que se guarde la directiva sin seleccionar esta funcionalidad.",
- "licenseLearnMoreText": "Obtener más información sobre los requisitos previos y las directivas de actualización de características.",
- "optionalUpdateWarning": "Opcional solo está disponible para actualizaciones de Windows 11",
- "profileNameWarning": "El nombre debe tener menos de 64 caracteres",
- "specificLicensingRequired": "Algunas funcionalidades seleccionadas requieren licencias específicas."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Permitir el uso de letras minúsculas en el PIN",
- "notAllow": "No permitir el uso de letras minúsculas en el PIN",
- "requireAtLeastOne": "Requerir el uso de al menos una letra minúscula en el PIN"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Permitir el uso de caracteres especiales en el PIN",
- "notAllow": "No permitir el uso de caracteres especiales en el PIN",
- "requireAtLeastOne": "Requerir el uso de al menos un carácter especial en el PIN"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Permitir el uso de letras mayúsculas en el PIN",
- "notAllow": "No permitir el uso de letras mayúsculas en el PIN",
- "requireAtLeastOne": "Requerir el uso de al menos una letra mayúscula en el PIN"
- }
+ "InstallContextType": {
+ "device": "Dispositivo",
+ "deviceContext": "Contexto del dispositivo",
+ "user": "Usuario",
+ "userContext": "Contexto del usuario"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "Versión de la aplicación",
- "dependencyName": "Nombre de la dependencia",
- "lastModifiedTime": "Hora de la última modificación",
- "relationship": "Relación",
- "replaced": "Reemplazado",
- "searchPlaceholder": "Filtrar por nombre de aplicación",
- "status": "Detalles del estado",
- "statusDetails": "Estado",
- "supersedenceName": "Nombre de sustitución"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Dependencia secundaria",
- "indirectSupersedence": "No relacionado directamente",
- "supersedenceAncestors": "Sustituir",
- "supersedenceDescendants": "Se reemplazó"
- },
- "SupersededReplaced": {
- "no": "No",
- "yes": "Sí"
- },
- "Tabs": {
- "chart": "Gráfico",
- "dependency": "Dependencia",
- "label": "Ver: ",
- "supersedence": "Sustitución",
- "table": "Tabla"
- },
- "dependencyGraphAriaLabel": "Gráfico de dependencias de aplicación",
- "supersedenceGraphAriaLabel": "Gráfico de sustitución de aplicaciones"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Seleccione un script de detección.",
- "scriptFileLabel": "Seleccione su script de detección"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Cuando se habilita, los dispositivos deben ser compatibles según las reglas personalizadas definidas en un archivo JSON en función de los datos personalizados devueltos por un script de PowerShell de detección.",
- "label": "El Cumplimiento personalizado se ofrece actualmente en versión preliminar. Cuando esté disponible de manera general, podrá agregarla por un coste adicional a las opciones de licencia que incluyen Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Script",
- "placeholder": "Hacer clic para seleccionar",
- "searchboxPlaceholder": "Buscar por nombre de script",
- "title": "Seleccionar un script de detección"
- },
- "SummaryGrid": {
- "ariaLabel": "Resumen de reglas de cumplimiento personalizado"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "Una acción de bloqueo es necesaria para todas las directivas de cumplimiento.",
+ "graceperiod": "Programar (días después del no cumplimiento)",
+ "graceperiodInfo": "Especificar el número de días sin cumplimiento transcurrido el cual debe desencadenarse esta acción para el dispositivo del usuario",
+ "subtitle": "Especificar parámetros de acción",
+ "title": "Parámetros de acción"
+ },
+ "List": {
+ "gracePeriodDay": "{0} día después del no cumplimiento",
+ "gracePeriodDays": "{0} días después del no cumplimiento",
+ "gracePeriodHour": "{0} hora después del incumplimiento",
+ "gracePeriodHours": "{0} horas después del incumplimiento",
+ "gracePeriodMinute": "{0} minuto después del incumplimiento",
+ "gracePeriodMinutes": "{0} minutos después del incumplimiento",
+ "immediately": "Inmediatamente",
+ "schedule": "Programar",
+ "scheduleInfoBalloon": "Días después del incumplimiento",
+ "subtitle": "Especificar la secuencia de acciones en los dispositivos no conformes",
+ "title": "Acciones"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Otros",
+ "additionalRecipients": "Destinatarios adicionales (por correo electrónico)",
+ "additionalRecipientsBladeTitle": "Seleccionar destinatarios adicionales",
+ "emailAddressPrompt": "Escriba direcciones de correo electrónico (separadas por comas)",
+ "invalidEmail": "Dirección de correo electrónico no válida",
+ "messageTemplate": "Plantilla de mensaje",
+ "noneSelected": "No se ha seleccionado ninguno",
+ "notSelected": "No seleccionada",
+ "numSelected": "{0} seleccionados",
+ "selected": "Seleccionado"
},
- "UploadFile": {
- "jsonFileLabel": "Cargue y valide el archivo JSON con la configuración de cumplimiento personalizado",
- "noFileSelectedError": "Seleccione un archivo JSON.",
- "parseFileSelectedError": "El archivo JSON no es válido."
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filtrar",
- "noFilters": "Ninguno"
- },
- "Platform": {
- "all": "Todas",
- "android": "Administrador de dispositivos Android",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Común",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS y Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Desconocido",
- "unsupported": "No compatible",
- "windows": "Windows",
- "windows10": "Windows 10 y versiones posteriores",
- "windows10CM": "Windows 10 y versiones posteriores (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 y versiones posteriores",
- "windows8And10": "Windows 8 y 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 y versiones posteriores",
- "windows10AndWindowsServer": "Windows 10, Windows 11 y Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 y versiones posteriores (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "PC Windows"
- },
+ "block": "Marcar el dispositivo como no conforme",
+ "lockDevice": "Bloquear dispositivo (acción local)",
+ "lockDeviceWithPasscode": "Bloquear dispositivo (acción local)",
+ "noAction": "No hay ninguna acción",
+ "noActionRow": "No hay ninguna acción, seleccione 'Agregar' para agregar una acción",
+ "pushNotification": "Enviar notificación push al usuario final",
+ "remoteLock": "Bloquear de forma remota el dispositivo no conforme",
+ "removeSourceAccessProfile": "Quitar perfil de acceso de origen",
+ "retire": "Agregar dispositivo a la lista de retirada",
+ "wipe": "Borrar",
+ "emailNotification": "Enviar correo electrónico a usuario final"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Grupos de administradores",
+ "RoleAssignmentAdminDesc": "Los usuarios del grupo de administradores son los administradores asignados a este rol.",
+ "rolesMenuTitle": "Roles Endpoint Manager",
+ "RoleAssignmentScopeDesc": "Los administradores de esta asignación de roles pueden dirigirse a directivas, aplicaciones y tareas remotas",
+ "RoleAssignmentScope": "Grupos de ámbitos"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "Información de la aplicación",
"nameForOfficeSuitApp": "Información del conjunto de aplicaciones"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "En Android, puede permitir el uso de la identificación de huellas digitales en lugar de un PIN. Se pide a los usuarios que proporcionen sus huellas digitales cuando acceden a esta aplicación con sus cuentas profesionales.",
- "iOS": "En el caso de los dispositivos iOS/iPadOS, puede permitir la identificación mediante una huella digital, en lugar de con un PIN. Cuando el usuario intente acceder a la aplicación con su cuenta profesional, se le solicitará que proporcione su huella digital.",
- "mac": "En el caso de los dispositivos Mac, puede permitir la identificación mediante una huella digital, en lugar de con un PIN. Cuando el usuario intente acceder a la aplicación con su cuenta profesional, se le solicitará que proporcione su huella digital."
- },
- "allowWidgetContentSync": "Elija Bloquear para impedir que las aplicaciones administradas por directivas guarden datos en widgets de aplicación. Si elige Permitir, la aplicación administrada por directivas puede guardar datos en widgets de aplicación, si esas características se admiten y habilitan dentro de la aplicación administrada por directivas. \r\n\r\n \r\n\r\nLas aplicaciones pueden proporcionar capacidad de configuración adicional con directivas de configuración de aplicaciones. Para más información, consulte la documentación de la aplicación.",
- "appSharingFromLevel1": "Seleccione una de las opciones siguientes para especificar las aplicaciones de las que esta aplicación puede recibir datos:",
- "appSharingFromLevel2": "{0}: Permitir solo la recepción de datos de otras aplicaciones administradas por directivas en las cuentas o documentos de la organización",
- "appSharingFromLevel3": "{0}: Permitir la recepción de datos de cualquier aplicación en las cuentas o documentos de la organización",
- "appSharingFromLevel4": "{0}: No permitir la recepción de datos de ninguna aplicación en las cuentas o documentos de la organización",
- "appSharingFromLevel5": "{0}: permitir la transferencia de datos desde cualquier aplicación y tratar todos los datos entrantes que no tengan una identidad de usuario como datos de la organización.",
- "appSharingToLevel1": "Seleccione una de las opciones siguientes para especificar las aplicaciones a las que esta aplicación puede enviar datos:",
- "appSharingToLevel2": "{0}: Permitir solo el envío de datos de la organización a otras aplicaciones administradas por directivas",
- "appSharingToLevel3": "{0}: Permitir el envío de datos de la organización a cualquier aplicación",
- "appSharingToLevel4": "{0}: No permitir el envío de datos de la organización a ninguna aplicación",
- "appSharingToLevel5": "{0}: permitir solo la transferencia a otras aplicaciones administradas por directivas y la transferencia de archivos a otras aplicaciones administradas por MDM en los dispositivos inscritos.",
- "appSharingToLevel6": "{0}: permitir solo la transferencia a otras aplicaciones administradas por directivas y filtrar los cuadros de diálogo Abrir en/Compartir del sistema operativo para que solo muestren aplicaciones de este tipo.",
- "assignmentFilterEdit1": "Si aplica filtros de asignación a esta directiva, se aplicará la propiedad \"Tipo de administración de dispositivos\" además de los valores especificados para \"Destino a aplicaciones en todos los tipos de dispositivo\" y \"Tipos de dispositivo\" en la página \"Aplicaciones\".",
- "assignmentFilterEdit2": "Obtenga más información sobre la asignación de directivas de protección de aplicaciones.",
- "conditionalEncryption1": "Seleccione {0} para deshabilitar el cifrado de aplicaciones para el almacenamiento interno de aplicaciones cuando se detecte el cifrado de dispositivos en un dispositivo inscrito.",
- "conditionalEncryption2": "Nota: Intune solo puede detectar la inscripción de dispositivos con MDM de Intune. El almacenamiento externo de aplicaciones seguirá siendo cifrado para garantizar que aplicaciones sin administrar puedan acceder a los datos.",
- "contactSyncMac": "Si esta opción está deshabilitada, las aplicaciones no pueden guardar contactos en la libreta de direcciones nativa.",
- "contactsSync": "Elija Bloquear para impedir que las aplicaciones administradas por directivas guarden datos en las aplicaciones nativas del dispositivo (como Contactos, Calendario y widgets) o para impedir el uso de complementos dentro de las aplicaciones administradas por directivas. Si elige Permitir, la aplicación administrada por directivas puede guardar datos en las aplicaciones nativas o usar complementos, si esas características se admiten y habilitan en la aplicación administrada por directivas.
Las aplicaciones pueden proporcionar capacidad de configuración adicional con directivas de configuración de aplicaciones. Para obtener más información, consulte la documentación de la aplicación.",
- "deviceTypeTargetingCreate1": "La selección de destino del tipo de dispositivo se ha movido al paso Asignaciones en la creación de directivas.",
- "deviceTypeTargetingEdit1": "Si aplica filtros de asignación a esta directiva, se aplicará la propiedad \"Tipo de administración de dispositivos\" además de los valores especificados para \"Destino a aplicaciones en todos los tipos de dispositivo\" y \"Tipos de dispositivo\" en la página \"Aplicaciones\".",
- "deviceTypeTargetingEdit2": "Para editar la asignación de tipos de administración de dispositivos, restablezca \"Destino a aplicaciones en todos los tipos de dispositivos\" = \"Sí\". Luego, cree un filtro de asignación MAM con los valores deseados para \"Tipo de administración de dispositivos\".",
- "deviceTypeTargetingHasMoved": "Más información sobre la asignación de directivas de protección de aplicaciones",
- "encryptionAndroid1": "En el caso de las aplicaciones asociadas a una directiva de administración de aplicaciones móviles de Intune, el cifrado lo proporciona Microsoft. Los datos se cifran de forma sincrónica durante las operaciones de E/S de archivos, de acuerdo con la configuración de la directiva de administración de aplicaciones móviles. Las aplicaciones administradas en Android usan el cifrado AES-128 en modo CBC mediante las bibliotecas de criptografía de plataformas. El método de cifrado no es compatible con FIPS 140-2. El cifrado SHA-256 se admite como instrucción explícita mediante el parámetro SigAlg y solo funcionará en dispositivos con la versión 4.2 y posteriores. El contenido del almacenamiento del dispositivo siempre estará cifrado.",
- "encryptionAndroid2": "Si solicita el cifrado en la directiva de aplicación, se le solicitará al usuario final que configure y use un PIN para acceder al dispositivo. Si no hay un PIN configurado para acceder al dispositivo, las aplicaciones no se iniciarán y, en su lugar, el usuario final verá el mensaje siguiente: \\\"La compañía ha requerido que primero debe habilitar un PIN de dispositivo para tener acceso a esta aplicación\\\".",
- "encryptionMac1": "En el caso de las aplicaciones asociadas a una directiva de administración de aplicaciones móviles de Intune, el cifrado lo proporciona Microsoft. Los datos se cifran de forma sincrónica durante las operaciones de E/S de archivos de acuerdo con la configuración de la directiva de administración de aplicaciones móviles. Las aplicaciones administradas en Mac usan el cifrado AES-128 en modo CBC mediante las bibliotecas de criptografía de plataformas. El método de cifrado no es compatible con FIPS 140-2. El cifrado SHA-256 se admite como instrucción explícita mediante el parámetro SigAlg y solo funcionará en dispositivos con la versión 4.2 y posteriores. El contenido del almacenamiento del dispositivo siempre estará cifrado.",
- "faceId1": "Cuando proceda, puede permitir el uso de la identificación de caras en lugar de un PIN. Se pide a los usuarios que proporcionen identificación de caras al acceder a esta aplicación con sus cuentas profesionales.",
- "faceId2": "Seleccione Sí para permitir la identificación de caras en lugar de usar un PIN para el acceso a la aplicación.",
- "managementLevelsAndroid1": "Use esta opción para especificar si la directiva se aplica a los dispositivos del administrador de dispositivos Android, a los dispositivos Android Enterprise o a los dispositivos no administrados.",
- "managementLevelsAndroid2": "{0}: los dispositivos no administrados son aquellos en los que no se ha detectado la administración MDM de Intune. Esto incluye a los proveedores de MDM de terceros.",
- "managementLevelsAndroid3": "{0}: dispositivos administrados por Intune que usan la API de administración de dispositivos Android.",
- "managementLevelsAndroid4": "{0}: dispositivos administrados por Intune que usan perfiles de trabajo de Android Enterprise o la administración de dispositivos completa de Android Enterprise.",
- "managementLevelsIos1": "Use esta opción para especificar si la directiva se aplica a los dispositivos administrados por MDM o a dispositivos no administrados.",
- "managementLevelsIos2": "{0}: los dispositivos no administrados son aquellos en los que no se ha detectado la administración MDM de Intune. Esto incluye a los proveedores de MDM de terceros.",
- "managementLevelsIos3": "{0}: MDM de Intune administra los dispositivos administrados.",
- "minAppVersion": "Defina el número de versión mínimo de la aplicación que debe tener un usuario para obtener acceso seguro a ella.",
- "minAppVersionWarning": "Defina el número de versión mínimo recomendado de la aplicación que debe tener un usuario para el acceso seguro a ella.",
- "minOsVersion": "Defina el número de versión mínimo necesario del sistema operativo que debe tener un usuario para obtener acceso seguro a la aplicación.",
- "minOsVersionWarning": "Defina el número de versión mínimo recomendado del sistema operativo que debe tener un usuario para obtener acceso seguro a la aplicación.",
- "minPatchVersion": "Defina el nivel de revisión de seguridad Android más antiguo requerido que el usuario puede tener para conseguir acceso seguro a la aplicación.",
- "minPatchVersionWarning": "Defina el nivel de revisión de seguridad Android recomendado más antiguo que el usuario puede tener para obtener acceso seguro a la aplicación.",
- "minSdkVersion": "Defina la versión mínima necesaria del SDK de la directiva de protección de aplicaciones de Intune que debe tener un usuario para obtener acceso seguro a la aplicación.",
- "requireAppPinDefault": "
Seleccione Sí para deshabilitar el PIN de la aplicación cuando se detecte un bloqueo de dispositivo en un dispositivo inscrito.
",
- "targetAllApps1": "Use esta opción para destinar la directiva a aplicaciones en dispositivos con cualquier estado de administración.",
- "targetAllApps2": "Esta configuración se reemplaza durante la resolución de conflictos de directivas si un usuario tiene una directiva destinada a un estado de administración específico.",
- "touchId2": "Seleccione {0} para requerir una huella digital para la identificación y el acceso a la aplicación, en lugar de un PIN."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Especifique el número de días que deben transcurrir antes de que el usuario deba restablecer el PIN.",
- "previousPinBlockCount": "Esta configuración especifica el número de PIN anteriores que Intune va a conservar. Todo PIN nuevo debe ser distinto de los que Intune conserva."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Esto permite que Windows Search continúe la búsqueda en los datos cifrados.",
- "authoritativeIpRanges": "Habilite esta configuración si quiere invalidar la detección automática de intervalos IP de Windows.",
- "authoritativeProxyServers": "Habilite esta configuración si quiere invalidar la detección automática de servidores proxy de Windows.",
- "checkInput": "Comprobar la validez de las entradas",
- "dataRecoveryCert": "Un certificado de recuperación es un certificado del Sistema de cifrado de archivos (EFS) que se puede usar para recuperar archivos cifrados si la clave de cifrado se pierde o se daña. Debe crear el certificado de recuperación y especificarlo aquí. Encontrará más información aquí",
- "enterpriseCloudResources": "
Especifique recursos de nube para tratarlos como corporativos y protegerlos con la directiva Windows Information Protection. Se pueden especificar varios recursos separados con el carácter \\\"|\\\".
Si tiene un proxy configurado en la empresa, puede especificar el proxy a través del cual se dirigirá el tráfico hacia los recursos de nube especificados.
URL[,Proxy]|URL[,Proxy]
Sin proxy: contoso.sharepoint.com|contoso.visualstudio.com Con proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Especifique los intervalos IPv4 que conforman su red corporativa. Estos intervalos se usan junto con los nombres de dominio de la red empresarial para definir los límites de su red corporativa.
Esta configuración es necesaria para tener Windows Information Protection habilitado.
Se pueden especificar varios intervalos separados por comas.
Por ejemplo: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
- "enterpriseIPv6Ranges": "
Especifique los intervalos IPv6 que conforman su red corporativa. Estos intervalos se usan junto con los nombres de dominio de la red empresarial que especifique para definir los límites de su red corporativa.
Se pueden especificar varios intervalos separados por comas.
Por ejemplo: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
- "enterpriseInternalProxyServers": "
Si tiene un proxy configurado en su compañía, puede especificar el proxy a través del cual debe dirigirse el tráfico hacia los recursos de nube especificados en la configuración de Recursos de Enterprise Cloud.
Se pueden especificar varios valores separados con punto y coma.
Por ejemplo: contoso.internalproxy1.com;contoso.internalproxy2.com
",
- "enterpriseNetworkDomainNames": "
Especifique los nombres DNS que conforman su red corporativa. Estos nombres se usan junto con los intervalos IP que especifique para definir los límites de su red corporativa. Se pueden especificar varios valores separados por comas.
Esta configuración es necesaria para tener Windows Information Protection habilitado.
Por ejemplo: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Especifique los nombres DNS que conforman su red corporativa. Estos nombres se usan con los intervalos de IP que especifique para definir los límites de su red corporativa. Se pueden especificar varios valores separados por \\\"|\\\".
Esta configuración es necesaria para habilitar Windows Information Protection.
Por ejemplo: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
Si tiene servidores proxy externos en la red corporativa, especifíquelos aquí. Cuando especifique una dirección de servidor proxy, debe especificar también el puerto a través del cual debe permitirse y protegerse el tráfico con Windows Information Protection.
Nota: Esta lista no debe incluir servidores de la lista de servidores proxy internos de la empresa. Se pueden especificar varios valores separados con punto y coma.
Por ejemplo: proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "Especifica el tiempo máximo permitido (en minutos) que debe transcurrir con el dispositivo inactivo para que este se bloquee mediante PIN o contraseña. Los usuarios pueden seleccionar cualquier valor existente inferior al tiempo máximo especificado en la aplicación Configuración. Tenga en cuenta que Lumia 950 y 950XL tienen un valor de tiempo de espera máximo de cinco minutos, independientemente del valor establecido por esta directiva.",
- "maxInactivityTime2": "0 (valor predeterminado): no se define el tiempo de espera. El valor predeterminado \\\"0\\\" se interpreta como \\\"Tiempo de espera no definido\\\".",
- "maxPasswordAttempts1": "Esta directiva tiene comportamientos diferentes para los dispositivos móviles y de escritorio.",
- "maxPasswordAttempts2": "En el dispositivo móvil, cuando el usuario alcanza el valor establecido por la directiva, se borran los datos.",
- "maxPasswordAttempts3": "Cuando el usuario alcanza el valor establecido por esta directiva en un dispositivo de escritorio, este no se borra. En su lugar, se aplica el modo de recuperación de BitLocker, con el que los datos son inaccesibles pero recuperables. Si BitLocker no está habilitado, la directiva no puede aplicarse.",
- "maxPasswordAttempts4": "Antes de alcanzar el límite de intentos erróneos, se envía al usuario a la pantalla de bloqueo y se le avisa de que, en caso de más intentos incorrectos, el equipo se bloqueará. Cuando el usuario alcanza el límite, el dispositivo se reinicia automáticamente y muestra la página de recuperación de BitLocker, donde se pide al usuario la clave de recuperación de BitLocker.",
- "maxPasswordAttempts5": "0 (valor predeterminado): el dispositivo no se borra nunca después de especificarse un PIN o una contraseña incorrectos.",
- "maxPasswordAttempts6": "El valor más seguro es 0 si todos los valores de la directiva = 0. En caso contrario, el valor más seguro es el valor mínimo de la directiva.",
- "mdmDiscoveryUrl": "Especifique la dirección URL del punto de conexión de inscripción de MDM para los usuarios que se inscriban en MDM. De forma predeterminada, se especifica para Intune.",
- "minimumPinLength1": "Valor entero que establece el número mínimo de caracteres requeridos para el PIN. El valor predeterminado es 4. El número más bajo que se puede establecer para esta configuración de directiva es 4. El número más alto que se puede establecer debe ser menor que el número establecido en la configuración de directiva Longitud máxima del PIN o 127, el que sea más bajo.",
- "minimumPinLength2": "Si define esta configuración de directiva, la longitud del PIN debe ser mayor que o igual a este número. Si la deshabilita o no la configura, entonces la longitud debe ser mayor que o igual a 4.",
- "name": "Nombre del límite de esta red",
- "neutralResources": "
Si tiene puntos de conexión de redireccionamiento de autenticación en la compañía, especifíquelos aquí. Las ubicaciones que especifique aquí se consideran personales o corporativas en función del contexto de la conexión antes del redireccionamiento.
Se pueden especificar varios valores separados por comas.
Por ejemplo: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Valor que establece Windows Hello para empresas como método para iniciar sesión en Windows.",
- "passportForWork2": "Si establece esta directiva en falso, el usuario no podrá aprovisionar Windows Hello para empresas, excepto en los teléfonos móviles Microsoft Entra se hayan unido en los que se requiera el aprovisionamiento.",
- "pinExpiration": "El número máximo que se puede establecer para esta configuración de directiva es 730 y el número mínimo es 0. Si la directiva se establece en 0, el PIN del usuario no expirará nunca.",
- "pinHistory1": "El número máximo que se puede establecer para esta configuración de directiva es 50 y el número mínimo es 0. Si la directiva se establece en 0, no se requiere el almacenamiento de los PIN anteriores.",
- "pinHistory2": "El PIN actual del usuario se incluye en el conjunto de los PIN asociados a su cuenta. En caso de restablecimiento de los PIN, el historial correspondiente no se conserva.",
- "protectUnderLock": "Protege el contenido de la aplicación mientras el dispositivo está en estado bloqueado.",
- "protectionModeBlock": "
Bloquear: impide que los datos de empresa salgan de las aplicaciones protegidas.
",
- "protectionModeOff": "
Desactivado: el usuario puede reubicar datos fuera de las aplicaciones protegidas. No se registra ninguna acción.
",
- "protectionModeOverride": "
Permitir invalidaciones: se pide confirmación al usuario cuando intenta reubicar datos de una aplicación protegida en otra no protegida. Si decide invalidar este mensaje, la acción se registra.
",
- "protectionModeSilent": "
Silencio: el usuario puede reubicar datos fuera de las aplicaciones protegidas. Estas acciones se registran.
",
- "required": "Requerido",
- "revokeOnMdmHandoff": "Agregada en Windows 10, versión 1703. Esta directiva controla si se revocarán las claves WIP cuando un dispositivo se actualice de MAM a MDM. Si está establecida en \\\"Desactivada\\\", las claves no se revocarán y el usuario seguirá teniendo acceso a los archivos protegidos después de la actualización. Esta es la opción recomendada si el servicio MDM está configurado con el mismo elemento EnterpriseID de WIP que el servicio MAM.",
- "revokeOnUnenroll": "Esto hará que las claves de cifrado se revoquen al anularse la inscripción de un dispositivo en esta directiva.",
- "rmsTemplateForEdp": "GUID de TemplateID que se va a usar para el cifrado RMS. La plantilla de Azure RMS permite al administrador de TI configurar quién tiene acceso al archivo protegido por RMS y durante cuánto tiempo.",
- "showWipIcon": "Esto permitirá que el usuario sepa cuando se actúa en un contexto corporativo, mediante la superposición de un icono.",
- "useRmsForWip": "Especifica si se permite el cifrado de Azure RMS para WIP."
- },
- "requireAppPin": "
Seleccione la opción Sí para deshabilitar el PIN de aplicación cuando se detecte un bloqueo de dispositivo en un dispositivo inscrito.
Nota: Intune no puede detectar la inscripción de dispositivos con una solución EMM de terceros en iOS/iPadOS.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "La instalación de la aplicación puede forzar el reinicio del dispositivo",
- "basedOnReturnCode": "Determinar comportamiento en función de códigos de retorno",
- "force": "Intune forzará un reinicio obligatorio del dispositivo",
- "suppress": "Ninguna acción específica"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Tiempo de instalación necesario (minutos)",
- "maxRunTimeInMinutesToolTip": "Número de minutos que el sistema esperará a que finalice el programa de instalación. El valor predeterminado es 60 minutos."
- },
- "RunAsAccountOptions": {
- "system": "Sistema",
- "user": "Usuario"
- },
- "availableUninstall": "Permitir que la desinstalación esté disponible",
- "availableUninstallTooltip": "Seleccione \"Sí\" para ofrecer la opción de desinstalación de esta aplicación a los usuarios desde el Portal de empresa. Seleccione \"No\" para impedir que los usuarios desinstalen la aplicación desde el Portal de empresa.",
- "bladeTitle": "Programa",
- "deviceRestartBehavior": "Comportamiento de reinicio de dispositivo",
- "deviceRestartBehaviorTooltip": "Seleccione el comportamiento de reinicio del dispositivo después de que la aplicación se haya instalado correctamente. Seleccione \"Determinar comportamiento en función de códigos de retorno\" para reiniciar el dispositivo según los valores de configuración de los códigos de retorno. Seleccione \"Ninguna acción específica\" para suprimir los reinicios del dispositivo durante la instalación de aplicaciones basadas en MSI. Seleccione \"La instalación de la aplicación puede forzar el reinicio del dispositivo\" para permitir que se complete la instalación de la aplicación sin suprimir los reinicios. Seleccione \"Intune forzará un reinicio obligatorio del dispositivo\" para reiniciar siempre el dispositivo después de que la instalación de la aplicación se haya realizado correctamente.",
- "header": "Especifique los comandos para instalar y desinstalar la aplicación:",
- "installCommand": "Comando de instalación",
- "installCommandMaxLengthErrorMessage": "El comando de instalación no puede superar la longitud máxima permitida de 1024 caracteres.",
- "installCommandTooltip": "La línea de comandos de instalación completa que se usa para instalar la aplicación.",
- "runAs32Bit": "Ejecutar comandos de instalación y desinstalación en un proceso de 32 bits en clientes de 64 bits",
- "runAs32BitTooltip": "Seleccione \"Sí\" para instalar y desinstalar la aplicación en un proceso de 32 bits en clientes de 64 bits. Seleccione \"No\" (predeterminado) para instalarla y desinstalarla en un proceso de 64 bits en clientes de 64 bits. Los clientes de 32 bits siempre usan un proceso de 32 bits.",
- "runAsAccount": "Comportamiento de instalación",
- "runAsAccountTooltip": "Seleccione \"Sistema\" para instalar esta aplicación para todos los usuarios si se admite. Seleccione \"Usuario\" para instalar esta aplicación para el usuario que ha iniciado sesión en el dispositivo. En las aplicaciones MSI de doble propósito, los cambios evitarán que las actualizaciones y desinstalaciones finalicen correctamente hasta que se restaure el valor aplicado al dispositivo en el momento de la instalación original.",
- "selectorLabel": "Programa",
- "uninstallCommand": "Comando de desinstalación",
- "uninstallCommandTooltip": "La línea de comandos de desinstalación completa que se usa para desinstalar la aplicación."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Crear nuevo",
- "createNewResourceAccountInfo": "
\r\nCree una cuenta de recurso durante la inscripción. La cuenta del recurso se agregará a la tabla de cuentas de recursos inmediatamente, pero no estará activa hasta que el dispositivo se inscriba y se compruebe la suscripción de Surface Hub. Más información sobre las cuentas de recursos
\r\n ",
- "createNewResourceTitle": "Crear cuenta de recurso",
- "deviceNameInvalid": "El formato del nombre de dispositivo no es válido.",
- "deviceNameRequired": "Se requiere el nombre de un dispositivo.",
- "editResourceAccountLabel": "Editar",
- "selectExistingCommandMenu": "Seleccionar existente"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "Los nombres deben tener un máximo de 15 caracteres y pueden contener letras (a-z, A-Z), números (0-9) y guiones. No deben contener solo números y no pueden incluir un espacio en blanco."
- },
- "Header": {
- "addressableUserName": "Nombre descriptivo",
- "azureADDevice": "Dispositivo Microsoft Entra asociado",
- "batch": "Etiqueta de grupo",
- "dateAssigned": "Fecha de asignación",
- "deviceAccountPwd": "Contraseña de la cuenta de dispositivo",
- "deviceAccountUpn": "Cuenta del dispositivo",
- "deviceDisplayName": "Nombre de dispositivo",
- "deviceFriendlyName": "Nombre descriptivo del dispositivo",
- "deviceName": "Nombre de dispositivo",
- "deviceUseType": "Tipo de uso del dispositivo",
- "enrollmentState": "Estado de inscripción",
- "intuneDevice": "Dispositivo de Intune asociado",
- "lastContacted": "Último contacto",
- "make": "Fabricante",
- "model": "Modelo",
- "profile": "Perfil asignado",
- "profileStatus": "Estado del perfil",
- "purchaseOrderId": "Pedido de compra",
- "resourceAccount": "Cuenta de recurso",
- "serialNumber": "Número de serie",
- "userPrincipalName": "Usuario"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Se necesita un nombre descriptivo",
- "pwdRequired": "Se requiere una contraseña",
- "pwdValidFormat": "No se puede actualizar la contraseña. El valor proporcionado para la nueva contraseña no cumple los requisitos de longitud o complejidad del dominio.",
- "upnRequired": "Se requiere una cuenta de dispositivo",
- "upnValidFormat": "Los valores pueden contener letras (a-z, A-Z), números (0-9) y guiones. Los valores no pueden incluir un espacio en blanco."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Reunión y presentación",
- "teamCollaboration": "Colaboración en grupo"
- },
- "Devices": {
- "featureDescription": "Windows Autopilot le permite personalizar la experiencia de configuración rápida (OOBE) para sus usuarios.",
- "importErrorStatus": "Algunos dispositivos no se importaron. Haga clic aquí para obtener más información.",
- "importPendingStatus": "Importación en curso. Tiempo transcurrido: {0} min. Este proceso puede tardar hasta {1} min."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Microsoft Entra híbrido unido",
- "activeDirectoryADLabel": "Unido a Microsoft Entra híbrido con Autopilot",
- "azureAD": "Microsoft Entra unido",
- "unknownType": "Tipo desconocido"
- },
- "Filter": {
- "enrollmentState": "Estado",
- "profile": "Estado del perfil"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "El nombre descriptivo de usuario no puede estar vacío."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Cree una plantilla de asignación de nombres para agregar nombres a los dispositivos durante la inscripción.",
- "label": "Aplicar plantilla de nombre de dispositivo"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "En el caso de los perfiles de implementación de Autopilot de tipo unido Microsoft Entra híbrido, los dispositivos se nombran utilizando los parámetros especificados en la configuración de Domain Join."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MiEmpresa-%RAND:4%",
- "label": "Escriba un nombre",
- "noDisallowedChars": "El nombre solo puede contener caracteres alfanuméricos, guiones, %SERIAL% o %RAND:x%",
- "serialLength": "No se pueden usar más de siete caracteres con %SERIAL%",
- "validateLessThan15Chars": "El nombre debe tener un máximo de 15 caracteres.",
- "validateNoSpaces": "Los nombres de equipo no pueden contener espacios",
- "validateNotAllNumbers": "El nombre también debe contener letras o guiones",
- "validateNotEmpty": "El nombre no puede estar vacío",
- "validateOnlyOneMacro": "El nombre solo debe contener una de estas macros: %SERIAL% o %RAND:x%"
+ "ScopeTypes": {
+ "allDevices": "Todos los dispositivos",
+ "allUsers": "Todos los usuarios",
+ "allUsersAndDevices": "Todos los usuarios y todos los dispositivos",
+ "selectedGroups": "Grupos seleccionados"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Descripción",
+ "placeholder": "Escribir una descripción"
+ },
+ "NameTextBox": {
+ "label": "Nombre",
+ "placeholder": "Escriba un nombre"
+ },
+ "PublisherTextBox": {
+ "label": "Editor",
+ "placeholder": "Escribir un editor"
+ },
+ "VersionTextBox": {
+ "label": "Versión"
+ },
+ "headerDescription": "Cree un paquete de scripts personalizado a partir de los scripts de detección y corrección que ha escrito."
},
- "ConfigureComputerNameTemplate": {
- "description": "Cree un nombre único para los dispositivos. Los nombres deben tener un máximo de 15 caracteres y pueden contener letras (a-z, A-Z), números (0-9) y guiones. No deben contener solo números. Los nombres no pueden incluir un espacio en blanco. Use la macro %SERIAL% para agregar un número de serie específico del hardware. Como alternativa, use la macro %RAND:x% para agregar una cadena aleatoria de números, donde x es igual al número de dígitos que se van a agregar."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Habilite la opción para presionar la tecla Windows 5 veces y ejecutar OOBE sin autenticación de usuario a fin de inscribir el dispositivo y aprovisionar todas las configuraciones y aplicaciones del contexto del sistema. Las relativas al contexto del usuario se proporcionarán cuando este inicie sesión.",
- "label": "Permitir implementación aprovisionada previamente"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "El flujo de unión del Autopilot Microsoft Entra híbrido continuará aunque no establezca la conectividad del controlador de dominio durante el OOBE.",
- "label": "Omitir comprobación de conectividad de AD"
- },
- "accountType": "Tipo de cuenta de usuario",
- "accountTypeInfo": "Especifique si los usuarios son administradores o usuarios estándar en el dispositivo. Tenga en cuenta que esta configuración no se aplica a las cuentas de administrador global o administrador de empresa. Estas cuentas no pueden ser usuarios estándar porque tienen acceso a todas las funciones administrativas de Microsoft Entra ID.",
- "configOOBEInfo": "
\r\nEstablezca la configuración rápida para los dispositivos Autopilot\r\n
",
- "configureDevice": "Modo de implementación",
- "configureDeviceHintForSurfaceHub2": "Autopilot solo admite el modo de implementación automática para Surface Hub 2. Este modo no asocia el usuario al dispositivo inscrito, por lo que no requiere credenciales de usuario.",
- "configureDeviceHintForWindowsPC": "
\r\n El modo de implementación controla si un usuario debe proporcionar credenciales para aprovisionar el dispositivo.\r\n
\r\n
\r\n
\r\n Controlado por el usuario: los dispositivos se asocian al usuario que los inscribe y se requieren sus credenciales para el aprovisionamiento.\r\n
\r\n
\r\n Implementación automática (versión preliminar): los dispositivos no se asocian al usuario que los inscribe y no se requieren sus credenciales para el aprovisionamiento.\r\n
\r\n
",
- "createSurfaceHub2Info": "Establezca la configuración de inscripción de Autopilot para los dispositivos Surface Hub 2. De forma predeterminada, Autopilot habilita la omisión de la autenticación del usuario durante la configuración rápida. Obtenga más información acerca de Windows Autopilot para Surface Hub 2.",
- "createWindowsPCInfo": "\r\n
\r\nLas opciones siguientes se habilitan automáticamente para los dispositivos Autopilot en modo autoimplementable:\r\n
\r\n
\r\n
\r\n Omisión de la selección de uso para trabajo o casa\r\n
\r\n
\r\n Omisión de la configuración de OneDrive y el registro de OEM\r\n
\r\n
\r\n Omisión de la autenticación de usuario en OOBE\r\n
\r\n
",
- "endUserDevice": "Controlado por el usuario",
- "hideEscapeLink": "Ocultar opciones para cambiar la cuenta",
- "hideEscapeLinkInfo": "Las opciones para cambiar de cuenta y empezar de nuevo con una cuenta diferente aparecen, respectivamente, durante la configuración inicial del dispositivo en la página de inicio de sesión de la empresa y en la página de error de dominio. Para ocultar estas opciones, debe configurar la marca de la empresa en Microsoft Entra ID (requiere Windows 10, 1809 o posterior, o Windows 11).",
- "info": "Al configurar perfiles de AutoPilot, se define la configuración rápida que los usuarios ven al iniciar Windows por primera vez. ",
- "language": "Idioma (región)",
- "languageInfo": "Especifique el idioma y la región que se van a usar.",
- "licenseAgreement": "Términos de licencia del software de Microsoft",
- "licenseAgreementInfo": "Especifique si se va a mostrar el CLUF a los usuarios.",
- "plugAndForgetDevice": "Implementación automática",
- "privacySettingWarning": "El valor predeterminado para la recopilación de datos de diagnóstico ha cambiado para los dispositivos que ejecutan Windows 10, versión 1903 y posteriores, o Windows 11.",
- "privacySettings": "Configuración de privacidad",
- "privacySettingsInfo": "Especifique si se va a mostrar la configuración de privacidad a los usuarios.",
- "showCortanaConfigurationPage": "Configuración de Cortana",
- "showCortanaConfigurationPageInfo": "Al mostrarla, se habilita la presentación de la configuración de Cortana durante el inicio.",
- "skipEULAWarning": "Información importante sobre cómo ocultar los términos de licencia",
- "skipKeyboardSelection": "Configurar el teclado automáticamente",
- "skipKeyboardSelectionInfo": "Si es true, la página de selección de teclado se omite en caso de haberse establecido el idioma.",
- "subtitle": "Perfiles de AutoPilot",
- "title": "Configuración rápida (OOBE)",
- "useOSDefaultLanguage": "Predeterminado del sistema operativo",
- "userSelect": "Selección de usuario"
- },
- "Sync": {
- "lastRequestedLabel": "Última solicitud de sincronización",
- "lastSuccessfulLabel": "Última sincronización correcta",
- "syncInProgress": "La sincronización está en curso. Vuelva a comprobarlo en breve.",
- "syncInitiated": "Sincronización de la configuración de AutoPilot iniciada.",
- "syncSettingsTitle": "Sincronizar configuración de AutoPilot"
- },
- "Title": {
- "devices": "Dispositivos Windows AutoPilot"
- },
- "Tooltips": {
- "addressableUserName": "Nombre de saludo que se muestra durante la instalación del dispositivo.",
- "azureADDevice": "Ir a los detalles del dispositivo asociado. N/D significa que no hay ningún dispositivo asociado.",
- "batch": "Atributo de cadena que puede utilizarse para identificar un grupo de dispositivos. El campo de etiqueta de grupo de Intune se corresponde con el atributo OrderID de los dispositivos Microsoft Entra.",
- "dateAssigned": "Marca de tiempo que indica cuándo se asignó el perfil al dispositivo.",
- "deviceAccountPwd": "Contraseña de la cuenta de dispositivo para dispositivos Surface Hub. Si se especifica, rellene también la cuenta del dispositivo y el nombre descriptivo.",
- "deviceAccountUpn": "Correo electrónico de la cuenta de dispositivo para dispositivos Surface Hub. Si se especifica, rellene también la contraseña de la cuenta del dispositivo y el nombre descriptivo.",
- "deviceDisplayName": "Configure un nombre único para un dispositivo. Este nombre será ignorado en las implementaciones unidas a Microsoft Entra híbrido. El nombre del dispositivo sigue procediendo del perfil de unión a dominio para dispositivos híbridos Microsoft Entra.",
- "deviceFriendlyName": "Nombre descriptivo del dispositivo para dispositivos Surface Hub. Si se especifica, rellene también la cuenta del dispositivo y la contraseña de la cuenta del dispositivo.",
- "deviceName": "Nombre que aparece cuando alguien ha intentado detectar el dispositivo y conectarse a él.",
- "deviceUseType": " La configuración del dispositivo se basa en las opciones seleccionadas. Siempre puede cambiar más adelante en las opciones de configuración.\r\n
\r\n
Para las reuniones y presentaciones, Windows Hello no se activa y los datos se eliminan después de cada sesión.\r\n
\r\n
Para la colaboración en grupo, Windows Hello se activa y los perfiles se guardan para un inicio de sesión rápido
\r\n
",
- "enrollmentState": "Especifica si el dispositivo se ha inscrito.",
- "intuneDevice": "Ir a los detalles del dispositivo asociado. N/D significa que no hay ningún dispositivo asociado.",
- "lastContacted": "Marca de tiempo que indica cuándo se contactó con el dispositivo por última vez.",
- "make": "Fabricante del dispositivo seleccionado.",
- "model": "Modelo del dispositivo seleccionado.",
- "profile": "Nombre del perfil asignado al dispositivo.",
- "profileStatus": "Especifica si un perfil está asignado al dispositivo.",
- "purchaseOrderId": "Identificador de pedido de compra",
- "resourceAccount": "La identidad del dispositivo o el nombre principal de usuario (UPN).",
- "serialNumber": "Número de serie del dispositivo seleccionado.",
- "userPrincipalName": "Usuario para el relleno previo de la autenticación durante la instalación del dispositivo."
- },
- "allDevices": "Todos los dispositivos",
- "allDevicesAlreadyAssignedError": "Ya hay un perfil de Autopilot asignado a Todos los dispositivos.",
- "assignFailedDescription": "No se pudieron actualizar las asignaciones de {0}.",
- "assignFailedTitle": "No se pudieron actualizar las asignaciones de perfil de AutoPilot.",
- "assignSuccessDescription": "Las asignaciones de {0} se actualizaron correctamente.",
- "assignSuccessTitle": "Las asignaciones de perfil de AutoPilot se actualizaron correctamente.",
- "assignSufaceHub2ProfileNextStep": "Pasos siguientes para esta implementación",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Asignar este perfil a al menos un grupo de dispositivos",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Asignar una cuenta de recursos a cada dispositivo Surface Hub en el que implemente este perfil",
- "assignedDevicesCount": "Dispositivos asignados",
- "assignedDevicesResourceAccountDescription": "
Para implementar este perfil en un dispositivo, debe asignar una cuenta de recurso al dispositivo. Seleccione un dispositivo cada vez para asignarle una cuenta de recurso existente o crear una. Más información sobre las cuentas de recursos
",
- "assignedDevicesResourceAccountStatusBarMessage": "En esta tabla solo se enumeran los dispositivos de Surface Hub 2 a los que se les ha asignado este perfil.",
- "assigningDescription": "Actualizando las asignaciones de {0}.",
- "assigningTitle": "Actualización de las asignaciones de perfil de AutoPilot",
- "autoremediationContext": "Hemos detectado un cambio de hardware en este dispositivo. Estamos intentando registrar automáticamente el nuevo hardware. No tiene que hacer nada ahora, el estado se actualizará en la próxima sincronización con el resultado. Más información sobre cómo restablecer el perfil.",
- "autoremediationTitle": "El dispositivo {0} tiene una corrección pendiente",
- "cannotDeleteMessage": "Este perfil está asignado a grupos. Para poder eliminarlo, antes debe desasignarlo de todos los grupos.",
- "cannotDeleteTitle": "No se puede eliminar {0}",
- "createdDateTime": "Creada",
- "deleteMessage": "Si elimina el perfil de AutoPilot, los dispositivos asignados a este se mostrarán Sin asignar.",
- "deleteMessageWithPolicySet": "{0} se incluye en uno o más conjuntos de directivas. Si elimina {0}, ya no podrá asignarlo mediante dichos conjuntos.",
- "deleteTitle": "¿Seguro que desea eliminar este perfil?",
- "description": "Descripción",
- "deviceType": "Tipo de dispositivo",
- "deviceUse": "Uso del dispositivo",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot solo admite dispositivos unidos a Microsoft Entra para Surface Hub 2. Especifique cómo se unen los dispositivos a Active Directory (AD) en su organización.\r\n
\r\n
\r\n
\r\n Unido a Microsoft Entra: Solo en la nube sin Windows Server Active Directory local.\r\n
\r\n Especifique cómo se unen los dispositivos a Active Directory (AD) en su organización:\r\n
\r\n
\r\n
\r\n Microsoft Entra unido: Solo en la nube sin Windows Server Active Directory local\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Error al capturar el recuento de dispositivos asignados.",
- "getAssignmentsError": "Error al capturar las asignaciones de perfiles de AutoPilot.",
- "harvestDeviceId": "Convertir todos los dispositivos de destino a Autopilot",
- "harvestDeviceIdDescription": "De forma predeterminada, este perfil solo puede aplicarse a los dispositivos Autopilot sincronizados desde el servicio Autopilot.",
- "harvestDeviceIdInfo": "\r\n Seleccione Sí para registrar todos los dispositivos de destino en Autopilot, si aún no lo están. La próxima vez que los dispositivos registrados sigan el proceso de configuración rápida (OOBE) de Windows, se les aplicará el escenario de Autopilot asignado.\r\n \r\n Tenga en cuenta que algunos escenarios de Autopilot requieren una versión de compilación mínima específica de Windows. Asegúrese de que el dispositivo tiene la versión de compilación mínima necesaria para aplicar el escenario.\r\n \r\n Al eliminar este perfil, no se eliminarán los dispositivos afectados de Autopilot. Para eliminar un dispositivo de Autopilot, use la vista Dispositivos Windows Autopilot.\r\n ",
- "harvestDeviceIdWarning": "Una vez convertidos, los dispositivos Autopilot solo pueden revertirse si se eliminan de la lista de dispositivos Autopilot.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Los perfiles de implementación de Windows AutoPilot permiten personalizar la configuración rápida para sus dispositivos.",
- "invalidProfileNameMessage": "No se permite el carácter \"{0}\".",
- "joinTypeLabel": "Únase a Microsoft Entra ID como",
- "lastModifiedDateTime": "Última modificación:",
- "manualRemediationContext": "Hemos detectado un cambio de hardware en este dispositivo. No recibirá automáticamente un perfil de Autopilot cuando se restablezca a menos que registre el dispositivo de nuevo. Más información sobre cómo restablecer el perfil.",
- "manualRemediationTitle": "El dispositivo {0} requiere su atención",
- "name": "Nombre",
- "noAutopilotProfile": "No hay perfiles de AutoPilot.",
- "notEnoughPermissionAssignedError": "No tiene suficientes permisos para asignar este perfil a uno o varios de los grupos seleccionados. Póngase en contacto con el administrador.",
- "profile": "perfil",
- "resourceAccountStatusBarMessage": "Se requiere una cuenta de recurso para cada dispositivo Surface Hub 2 en el que se implemente este perfil. Haga clic para obtener más información.",
- "selectServices": "Seleccionar el servicio de directorio al que se unirán los dispositivos",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Modo de implementación",
- "windowsPCCommandMenu": "PC Windows",
- "directoryServiceLabel": "Únase a Microsoft Entra ID como"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Grupos de administradores",
- "RoleAssignmentAdminDesc": "Los usuarios del grupo de administradores son los administradores asignados a este rol.",
- "rolesMenuTitle": "Roles Endpoint Manager",
- "RoleAssignmentScopeDesc": "Los administradores de esta asignación de roles pueden dirigirse a directivas, aplicaciones y tareas remotas",
- "RoleAssignmentScope": "Grupos de ámbitos"
- },
+ "ScopeTags": {
+ "headerDescription": "Seleccione uno o varios grupos para asignar el paquete de scripts."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Script de detección",
+ "placeholder": "Texto del script de entrada",
+ "requiredValidationMessage": "Escriba el script de detección."
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Exigir comprobación de firma del script"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Ejecutar este script con las credenciales de inicio de sesión"
+ },
+ "RemediationScript": {
+ "infoBox": "El script se ejecutará en modo exclusivo de detección porque no hay ningún script de corrección."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Script de corrección",
+ "placeholder": "Texto del script de entrada"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Ejecutar script en PowerShell de 64 bits"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Script no válido. Uno o varios de los caracteres que se usan en el script no son válidos."
+ },
+ "headerDescription": "Cree un paquete de scripts personalizado a partir de los scripts que ha escrito. De forma predeterminada, los scripts se ejecutarán en los dispositivos asignados cada día.",
+ "infoBox": "Este script es de solo lectura. Es posible que algunos de los valores de este script estén deshabilitados."
+ },
+ "title": "Crear un script personalizado",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Intervalo",
+ "time": "Fecha y hora"
+ },
+ "Interval": {
+ "day": "Se repite cada día",
+ "days": "Se repite cada {0} días",
+ "hour": "Se repite cada hora",
+ "hours": "Se repite cada {0} horas",
+ "month": "Se repite cada mes",
+ "months": "Se repite cada {0} meses",
+ "week": "Se repite cada semana",
+ "weeks": "Se repite cada {0} semanas"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) el {1}",
+ "withDate": "{0} el {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Editar: {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Sólo fallan las aplicaciones de bloqueo seleccionadas en la fase de técnico",
- "apps": "aplicaciones",
- "appsListName": "Lista de aplicaciones",
- "blockingApps": "Bloqueando aplicaciones",
- "managedApps": "Aplicaciones administradas",
- "noApps": "No hay aplicaciones.",
- "noAppsError": "Error al recuperar las aplicaciones.",
- "selectApps": "Seleccionar aplicaciones",
- "selectedAppsCount": "{0} aplicaciones seleccionadas (máx. 100)",
- "useSelectedAppsAll": "Todos",
- "useSelectedAppsSelected": "Seleccionado",
- "useSelectedAppsToggleLabel": "Bloquear el uso del dispositivo hasta que se instalen las aplicaciones necesarias si están asignadas al usuario/dispositivo"
- },
- "Header": {
- "application": "Aplicación",
- "publisher": "Anunciante",
- "version": "Versión"
- },
- "SearchBox": {
- "ariaLabel": "Buscar aplicaciones",
- "placeHolder": "Buscar por nombre o editor"
- },
- "allowToUseToggle": "Permitir a los usuarios utilizar el dispositivo si se produce un error de instalación",
- "blockToggle": "Bloquear el uso del dispositivo hasta que todos los perfiles y aplicaciones estén instalados",
- "blockToolTip": "Si agrega Microsoft Word a esta lista, por ejemplo, los usuarios y los dispositivos de destino no podrán salir de la página de estado de la inscripción hasta que Word se instale correctamente.",
- "collectLogToggle": "Activar la recopilación de registros y la página de diagnóstico para los usuarios finales",
- "create": "Crear perfil",
- "customMessageTextBox": "Mensaje de error",
- "customMessageToggle": "Mostrar un mensaje personalizado cuando se produce un límite de tiempo o un error",
- "enableForAutopilotOnlyToggle": "Mostrar solo la página en los dispositivos aprovisionados por la configuración rápida (OOBE)",
- "installQualityUpdatesToggle": "Instalar actualizaciones de calidad de Windows (podría reiniciar el dispositivo) (versión preliminar)",
- "progressToggle": "Mostrar el progreso de la configuración de la aplicación y el perfil",
- "resetToggle": "Permitir a los usuarios restablecer el dispositivo si se produce un error de instalación",
- "timeout": "Mostrar un error cuando el tiempo de instalación supera el número de minutos especificado"
- },
+ "OfficeUpdateChannel": {
+ "current": "Canal actual",
+ "deferred": "Canal semestral para empresas",
+ "firstReleaseCurrent": "Canal actual (vista previa)",
+ "firstReleaseDeferred": "Canal semestral para empresas (vista previa)",
+ "monthlyEnterprise": "Canal de empresa mensual",
+ "placeHolder": "Seleccionar una"
+ },
"TableHeaders": {
"activity": "Actividad",
"activityName": "Nombre de actividad",
@@ -1293,30 +417,175 @@
"excludedGroups": "Grupos excluidos",
"licenseType": "Tipo de licencia"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Configure los requisitos de credenciales y PIN que los usuarios deben cumplir para acceder a las aplicaciones en un contexto de trabajo."
- },
- "DataProtection": {
- "infoText": "Este grupo incluye controles de prevención de pérdida de datos (DLP), como restricciones para cortar, copiar, pegar y guardar como. Esta configuración determina la forma en la que los usuarios interactúan con los datos en las aplicaciones."
- },
- "DeviceTypes": {
- "selectOne": "Seleccione al menos un tipo de dispositivo."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Destinar a aplicaciones en todos los tipos de dispositivo"
- },
- "infoText": "Elija cómo quiere aplicar esta directiva a las aplicaciones de otros dispositivos. Después, agregue al menos una aplicación.",
- "selectOne": "Seleccione al menos una aplicación para crear una directiva."
- }
- },
- "AssignmentAction": {
- "exclude": "Excluido",
- "include": "Incluidos",
- "includeAllDevicesVirtualGroup": "Incluidos",
- "includeAllUsersVirtualGroup": "Incluidos"
- },
+ "Inputs": {
+ "accountDomain": "Dominio de cuenta",
+ "accountDomainHint": "por ejemplo, contosodomain",
+ "accountDomainInfoBalloon": "Especifique el dominio de la cuenta del usuario.",
+ "accountTypeInfoBalloon": "Especifique el tipo de cuenta que se configura según el modelo de autenticación",
+ "allowContactSetting": "Permitir que el usuario cambie la configuración de contacto",
+ "allowContactSyncInfoBalloon": "Especifique si el usuario tiene permiso para cambiar la configuración de sincronización de contactos",
+ "allowUserChange": "Permitir que el usuario cambie la configuración",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Escriba un nombre de paquete similar a com.microsoft.word",
+ "androidUrlValidation": "Especifique una dirección URL válida, similar a https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "Contexto de instalación de la aplicación",
+ "appUrlLabel": "Dirección URL de AppStore",
+ "appleUrlValidation": "Especifique una dirección URL válida, similar a https://www.itunes.apple.com/es/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Tipo de dispositivo aplicable",
+ "assignmentActionLabel": "Modo",
+ "authenticationMethodInfoBalloon": "Especifique el método de autenticación para el usuario",
+ "authenticationMetod": "Método de autenticación",
+ "authenticationType": "Tipo de autenticación",
+ "authenticationTypeInfoBalloon": "Especifique el tipo de autenticación para el usuario",
+ "availableLicenseCount": "Licencias disponibles",
+ "basicAuth": "Autenticación básica",
+ "biometricsInfoBalloon": "Puede que se requiera información biométrica (como TouchID o FaceID) para el acceso de los usuarios a la aplicación en su dispositivo. En caso de requerirse, dicha información se usa junto con el método de autenticación seleccionado en el perfil. Esta configuración no debe habilitarse si se han implementado directivas de protección de aplicaciones de Intune, ya que estas incluyen requisitos para el acceso a los datos administrados. Si se habilitan ambas opciones, se producirán múltiples solicitudes de acceso para Outlook Mobile. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como desactivada. ",
+ "bookNameLabel": "Nombre del libro",
+ "bundleDescriptionHint": "Escriba una descripción que defina las aplicaciones incluidas.",
+ "calendar": "Calendario",
+ "categoryLabel": "Categoría",
+ "categoryNameLabel": "Nombre predeterminado",
+ "certProfileType": "Tipo de perfil del certificado",
+ "certificate": "Certificado",
+ "certificates": "Certificados",
+ "commandLineLabel": "Argumentos de línea de comandos",
+ "commandLineSizeHint": "El texto de los argumentos de la línea de comandos tiene una longitud máxima de 1024 caracteres.",
+ "configurationSettingsFormatLabel": "Formato de opciones de configuración",
+ "configurationSettingsLabel": "Formato de configuración",
+ "contactSync": "Guardar contactos",
+ "contactSyncInfoBalloon": "Al guardar contactos en la libreta de direcciones nativa del dispositivo móvil, se pueden vincular las llamadas y mensajes de texto nuevos a los contactos de Outlook existentes del usuario. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como desactivada.",
+ "contacts": "Contactos",
+ "createdDateTime": "Creada",
+ "defaultCategoryHint": "Las categorías predeterminadas no se pueden cambiar",
+ "deploySMimeCertsFromIntune": "Implementar certificados S/MIME desde Intune",
+ "descriptionGenericLabel": "Descripción",
+ "descriptionHint": "Escribir una descripción...",
+ "descriptionLabel": "Descripción",
+ "descriptionSizeHint": "La descripción no debe tener más de 10,000 caracteres.",
+ "developerLabel": "Desarrollador",
+ "developerSizeHint": "El nombre del desarrollador tiene una longitud máxima de 256 caracteres.",
+ "disable": "Deshabilitar",
+ "disabled": "Deshabilitada",
+ "displayNameLabel": "Nombre",
+ "displayVersionHint": "Escribir la versión de la aplicación",
+ "displayVersionLabel": "Versión de la aplicación",
+ "displayVersionLengthCheck": "La longitud de la versión de visualización debe ser de 130 caracteres como máximo.",
+ "eBookCategoryNameLabel": "Nombre predeterminado",
+ "emailAccount": "Nombre de la cuenta de correo electrónico",
+ "emailAccountHint": "Por ejemplo, Correo electrónico corporativo.",
+ "emailAccountInfoBalloon": "Especifique el nombre para mostrar de la cuenta de correo electrónico tal y como aparecerá para los usuarios en sus dispositivos",
+ "emailAddressAttribute": "Atributo de dirección de correo electrónico del id. de Microsoft Entra",
+ "emailAddressInfoBalloon": "Especifique la dirección de correo electrónico que se usará para enviar y recibir correo electrónico",
+ "emailServer": "Servidor de correo electrónico",
+ "emailServerHint": "Por ejemplo, mail.contoso.com",
+ "emailServerInfoBalloon": "Especifique el nombre de host del servidor de Exchange",
+ "enable": "Habilitar",
+ "enableSMime": "Habilitar S/MIME",
+ "enabled": "Habilitada",
+ "encryptAllEmails": "Cifrar todos los correos electrónicos",
+ "encryptionCertificates": "Certificados de cifrado",
+ "endUserNotifications": "Notificaciones al usuario final",
+ "enrollmentTypeLabel": "Tipo de inscripción del dispositivo",
+ "externalRecipients": "Información sobre correo de destinatarios externos",
+ "externalRecipientsInfoBalloon": "La opción Información sobre correo de destinatarios externos aparece si el remitente agrega un destinatario externo o un grupo de distribución que contiene destinatarios externos. Esta información de correo electrónico indica a los remitentes si el mensaje que redactan va a salir de la organización, lo que les ayuda a tomar las decisiones correctas respecto al lenguaje, tono y contenido. Disponible solo para las cuentas de Exchange Online y las cuentas locales que usan la autenticación moderna híbrida. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada.",
+ "focusedInbox": "Bandeja de entrada Prioritarios",
+ "focusedInboxInfoBalloon": "La Bandeja de entrada Prioritarios separa la bandeja de entrada en dos pestañas: Prioritarios y Otros. Los correos electrónicos más importantes están en la pestaña Prioritarios y el resto en la pestaña Otros, con acceso fácil pero por separado. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada. ",
+ "fullScreenEnabledLabel": "Pantalla completa",
+ "gmailNineAmountOfEmail": "Cantidad de correo electrónico para sincronizar",
+ "gmailNineAuthenticationMethodInfoBalloon": "Seleccione cómo quiere que se autentiquen los usuarios en el servidor de correo electrónico. Use los certificados para ofrecer una experiencia totalmente segura y sin problemas a los usuarios finales. La autenticación basada en certificados no está disponible aún porque los perfiles de certificados SCEP y PKCS para los dispositivos del propietario no están disponibles. ",
+ "gmailNineCertificateUPNInfoBalloon": "El certificado debe incluir el nombre principal de usuario (UPN) como nombre alternativo del firmante.",
+ "gmailNineEmailAddressInfoBalloon": "El atributo Intune obtiene del identificador de Microsoft Entra para generar dinámicamente la dirección de correo electrónico que usará el perfil, por ejemplo, MyName@contoso.com (UPN). Más información sobre los atributos de Microsoft Entra para perfiles de correo electrónico.",
+ "gmailNineEmailServerInfoBalloon": "Ubicación de Exchange (dirección URL) del servidor de correo electrónico a la que se conecta la aplicación que especifica para recibir correo electrónico.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Controla la cantidad de correo electrónico que el cliente va a sincronizar.",
+ "gmailNineSSLInfoBalloon": "Habilita SSL para proteger todas las comunicaciones con el servidor de correo electrónico.",
+ "gmailNineUsernameInfoBalloon": "El atributo Intune obtiene del id. de Microsoft Entra para generar dinámicamente el nombre de usuario que usará el perfil, por ejemplo, MyName@contoso.com (UPN) o MyName (nombre de usuario). Obtener más información acerca de Microsoft Entra atributos para perfiles de correo electrónico.",
+ "ignoreManifestScope": "Ignorar ámbito de manifiesto",
+ "ignoreVersionDetection": "Omitir la versión de la aplicación",
+ "informationUrlLabel": "Dirección URL de información",
+ "informationUrlSizeHint": "La longitud máxima de la dirección URL de información es de 1024 caracteres",
+ "installAsManaged": "Instalar como administrado",
+ "installationSourceLabel": "Tipo de aplicación",
+ "installerTypeInfoBalloon": "El tipo de instalador del paquete de aplicación.",
+ "installerTypeLabel": "Tipo de instalador",
+ "isFeatured": "Mostrar como aplicación destacada en el Portal de empresa",
+ "isMAMEnabledToggleLabel": "Sí",
+ "lastModifiedDateTime": "Hora de la última actualización",
+ "ldapUrl": "DIRECCIÓN URL DE LDAP",
+ "licensingType": "Admite la asignación de contexto de dispositivo",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Versión mínima del sistema operativo",
+ "modernAuth": "Autenticación moderna",
+ "nameHint": "Escribir un nombre",
+ "nameLabel": "Nombre",
+ "nameSizeHint": "La longitud máxima del nombre es de 512 caracteres.",
+ "notConfigured": "Sin configurar",
+ "notesLabel": "Notas",
+ "notesSizeHint": "El texto de notas tiene una longitud máxima de 1024 caracteres.",
+ "notificationType": "Tipo de notificación",
+ "oneDay": "Un día",
+ "oneMonth": "Un mes",
+ "oneWeek": "Una semana",
+ "outlookSMimeSettings": "Configuración de S/MIME de Outlook",
+ "ownerLabel": "Propietario",
+ "ownerSizeHint": "El nombre del propietario tiene una longitud máxima de 256 caracteres.",
+ "packageIdLabel": "Identificador del paquete",
+ "packageNameLabel": "Nombre del paquete",
+ "pivCredentialNotConfigured": "No ha seleccionado ningún emisor de credenciales derivadas para el inquilino, lo cual es necesario para poder aplicar esta directiva a los dispositivos correctamente.",
+ "platformLabel": "Plataforma",
+ "policyDescriptionLabel": "Descripción",
+ "policyNameLabel": "Nombre",
+ "preComposedIconEnabled": "Precompuesto",
+ "primarySMTPAddress": "Dirección SMTP principal",
+ "privacyUrlLabel": "Dirección URL de privacidad",
+ "publisherHint": "Escribir un nombre de publicador",
+ "publisherLabel": "Publicador",
+ "publisherSizeHint": "El nombre del publicador debe tener entre 2 y 1024 caracteres (ambos valores incluidos).",
+ "require": "Requerir",
+ "requireBiometrics": "Requerir información biométrica para acceder a la aplicación",
+ "sAMAccountName": "SamAccountName",
+ "scopeTagsRequired": "Se necesita al menos una etiqueta de ámbito",
+ "searchAppLabel": "Seleccionar aplicación",
+ "searchAppLinkText": "Buscar en App Store",
+ "searchWinGetPublicRepositoryLinkText": "Buscar en el repositorio de la comunidad de Administrador de paquetes de Windows",
+ "searchWinGetStoreRepositoryLinkText": "Buscar en la aplicación Microsoft Store (nuevo)",
+ "selectAAD": "Seleccionar un atributo de Microsoft Entra",
+ "selectAppFileLabel": "Seleccionar archivo",
+ "selectAppFileLinkText": "Seleccionar un archivo del paquete de aplicaciones",
+ "selectAppFileToUpdateLabel": "Seleccionar un archivo para actualizar",
+ "selectAuthMethod": "Seleccione un método de autenticación",
+ "selectAuthType": "Seleccionar un tipo de autenticación",
+ "selectCatalogAppLabel": "Seleccionar aplicación",
+ "selectCatalogAppLinkText": "Buscar en el catálogo de aplicaciones empresariales",
+ "selectCertificate": "Seleccionar un certificado",
+ "signAllEmails": "Firmar todos los correos electrónicos",
+ "signingCertificates": "Certificados de firma",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Descripción del conjunto de aplicaciones",
+ "suiteNameLabel": "Nombre del conjunto de aplicaciones",
+ "targetApplicationBundleIdentifier": "Identificador del lote de aplicaciones de destino",
+ "targetedPlatformsLabel": "Plataforma de destino",
+ "tasks": "Tareas",
+ "threeDays": "Tres días",
+ "totalLicenseCount": "Total de licencias",
+ "twoWeeks": "Dos semanas",
+ "unifiedAssignmentsLabel": "Asignar a:",
+ "unlimited": "Sin límites",
+ "urlHint": "Escribir una dirección URL válida",
+ "useManagedBrowserHint": "Solo iOS y Android. Más información",
+ "useManagedBrowserLabel": "Se necesita Managed Browser para abrir este vínculo.",
+ "userPrinicipalName": "Nombre principal de usuario",
+ "username": "Nombre de usuario",
+ "usernameAttribute": "Atributo de nombre de usuario del id. de Microsoft Entra",
+ "usernameAttributreInfoBalloon": "Especifique la entidad de seguridad de usuario del perfil de correo electrónico que se usará para autenticar la cuenta",
+ "usernamePassword": "Nombre de usuario y contraseña",
+ "webAppUrlHint": "Escribir una dirección URL válida que empiece por http:// o https://",
+ "webAppUrlLabel": "Dirección URL de la aplicación",
+ "webAppUrlSizeHint": "La longitud máxima de la URL de la aplicación es de 1024 caracteres.",
+ "windowsUrlValidation": "Especifique una dirección URL válida, similar a https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "Datos XML especificados",
+ "xmlFormatInvalid": "El formato de la directiva XML no es válido.",
+ "xmlTooLarge": "El tamaño de entrada debe ser inferior a 1 MB."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Si no se asigna ninguna otra página de entidad de administración conjunta, la siguiente página de entidad de administración conjunta asignada que tenga la prioridad más alta o la página de entidad de administración conjunta predeterminada limitará a los usuarios afectados.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Entidad de administración conjunta",
"settingDescription": "La configuración de administración conjunta determina a quién pertenecen las cargas de trabajo."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Aplicación del sistema Android Enterprise",
- "androidForWorkApp": "Aplicación de Google Play Store administrado",
- "androidLobApp": "Aplicación de línea de negocio Android",
- "androidStoreApp": "Aplicación de la tienda Android",
- "builtInAndroid": "Aplicación Android integrada",
- "builtInApp": "Aplicación integrada",
- "builtInIos": "Aplicación iOS integrada",
- "default": "",
- "iosIPadOSWebClip": "Clip web de iOS/iPadOS",
- "iosLobApp": "Aplicación de línea de negocio iOS",
- "iosStoreApp": "Aplicación de la tienda iOS",
- "iosVppApp": "Aplicación del Programa de Compras por Volumen iOS",
- "lineOfBusinessApp": "Aplicación de línea de negocio",
- "macOSDmgApp": "Aplicación macOS (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Aplicación de línea de negocio de macOS",
- "macOSMicrosoftDefenderApp": "ATP de Microsoft Defender (macOS)",
- "macOSOfficeSuiteApp": "Aplicaciones de Microsoft 365 (macOS)",
- "macOSPkgApp": "Aplicación macOS (PKG)",
- "macOSWebClip": "Clip web de macOS",
- "macOsVppApp": "Aplicación del Programa de Compras por Volumen de macOS",
- "managedAndroidLobApp": "Aplicación de línea de negocio Android administrada",
- "managedAndroidStoreApp": "Aplicación de la tienda Android administrada",
- "managedGooglePlayApp": "Aplicación de Google Play Store administrado",
- "managedGooglePlayPrivateApp": "Aplicación privada de Google Play administrado",
- "managedGooglePlayWebApp": "Vínculo web de Google Play administrado",
- "managedIosLobApp": "Aplicación de línea de negocio iOS administrada",
- "managedIosStoreApp": "Aplicación de la tienda iOS administrada",
- "microsoftStoreForBusinessApp": "Aplicación de la Tienda Microsoft para Empresas",
- "microsoftStoreForBusinessReleaseManagedApp": "Tienda Microsoft para Empresas",
- "officeSuiteApp": "Aplicaciones de Microsoft 365 (Windows 10 y versiones posteriores)",
- "webApp": "Vínculo web",
- "windowsAppXLobApp": "Aplicación de línea de negocio de AppX para Windows",
- "windowsClassicApp": "Aplicación de Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 y versiones posteriores)",
- "windowsMobileMsiLobApp": "Aplicación de línea de negocio de MSI para Windows",
- "windowsPhone81AppXBundleLobApp": "Aplicación de línea de negocio AppX para Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "Aplicación de línea de negocio AppX para Windows Phone 8.1",
- "windowsPhone81StoreApp": "Aplicación de la Tienda Windows Phone 8.1",
- "windowsPhoneXapLobApp": "Aplicación de línea de negocio de XAP para Windows Phone",
- "windowsStoreApp": "Aplicación de Microsoft Store (heredada)",
- "windowsUniversalAppXLobApp": "Aplicación de línea de negocio de AppX para Windows Universal",
- "windowsUniversalLobApp": "Aplicación de línea de negocio Windows universal",
- "windowsWebApp": "Vínculo web de Windows"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Recomendado",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Baréin",
+ "countryNameZA": "Sudáfrica",
+ "countryNameJO": "Jordania",
+ "countryNameSD": "Sudán",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "República Checa",
+ "countryNameLT": "Lituania",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "RAE de Hong Kong",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Arabia Saudí",
+ "countryNamePG": "Papúa Nueva Guinea",
+ "countryNameBW": "Botsuana",
+ "countryNameDG": "Diego García",
+ "countryNameIN": "India",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Rumanía",
+ "countryNameKZ": "Kazajistán",
+ "countryNameLC": "Santa Lucía",
+ "countryNameGE": "Georgia",
+ "countryNameTT": "Trinidad y Tobago",
+ "countryNameMP": "Islas Marianas del Norte",
+ "countryNameMV": "Maldivas",
+ "countryNameFI": "Finlandia",
+ "countryNameNO": "Noruega",
+ "countryNameEE": "Estonia",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Uzbekistán",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tayikistán",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "Francia",
+ "countryNameOM": "Omán",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italia",
+ "countryNameAZ": "Azerbaiyán",
+ "countryNameKG": "Kirguistán",
+ "countryNameWF": "Wallis y Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Islas Malvinas",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "Sudán del Sur",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haití",
+ "countryNameSY": "Siria",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "San Vicente y las Granadinas",
+ "countryNameID": "Indonesia",
+ "countryNameRE": "Reunión",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "Macedonia del Norte",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Polinesia Francesa",
+ "countryNameKY": "Islas Caimán",
+ "countryNameIO": "Territorio Británico del Océano Índico",
+ "countryNameRU": "Rusia",
+ "countryNameMA": "Marruecos",
+ "countryNameAU": "Australia",
+ "countryNameBO": "Bolivia",
+ "countryNameVA": "La Santa Sede (Estado de la Ciudad del Vaticano)",
+ "countryNameVG": "Islas Vírgenes Británicas",
+ "countryNameFM": "Micronesia",
+ "countryNameAQ": "Antártida",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brasil",
+ "countryNameIS": "Islandia",
+ "countryNamePE": "Perú",
+ "countryNameBG": "Bulgaria",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamas, Las",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macao RAE",
+ "countryNameRW": "Ruanda",
+ "countryNameAS": "Samoa Americana",
+ "countryNameBQ": "Bonaire, San Eustaquio y Saba",
+ "countryNameMF": "San Martín",
+ "countryNameTM": "Turkmenistán",
+ "countryNameML": "Malí",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Nueva Caledonia",
+ "countryNameAC": "Isla Ascensión",
+ "countryNameBN": "Brunéi",
+ "countryNameBD": "Bangladés",
+ "countryNameMW": "Malaui",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabón",
+ "countryNameCA": "Canadá",
+ "countryNameSH": "Santa Elena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolia",
+ "countryNamePA": "Panamá",
+ "countryNameCM": "Camerún",
+ "countryNameNE": "Níger",
+ "countryNameCW": "Curazao",
+ "countryNameJP": "Japón",
+ "countryNameCY": "Chipre",
+ "countryNameCD": "República Democrática del Congo",
+ "countryNameTN": "Túnez",
+ "countryNameTR": "Turquía",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Suecia",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Camboya",
+ "countryNamePL": "Polonia",
+ "countryNameDZ": "Argelia",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Egipto",
+ "countryNameGF": "Guayana Francesa",
+ "countryNameNZ": "Nueva Zelanda",
+ "countryNamePS": "Autoridad Palestina",
+ "countryNameIL": "Israel",
+ "countryNameSL": "Sierra Leona",
+ "countryNameGR": "Grecia",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauritania",
+ "countryNameVI": "Islas Vírgenes de EE. UU.",
+ "countryNameGQ": "Guinea Ecuatorial",
+ "countryNameMX": "México",
+ "countryNameDJ": "Yibuti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "China",
+ "countryNameMZ": "Mozambique",
+ "countryNameBV": "Isla Bouvet",
+ "countryNameNF": "Isla Norfolk",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguila",
+ "countryNameGS": "Georgia del Sur e Islas Sandwich del Sur",
+ "countryNameRS": "Serbia",
+ "countryNameCC": "Islas Cocos",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Alemania",
+ "countryNameCG": "República del Congo",
+ "countryNameKW": "Kuwait",
+ "countryNameMH": "Islas Marshall",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarús",
+ "countryNameMY": "Malasia",
+ "countryNameST": "Santo Tomé y Príncipe",
+ "countryNameLS": "Lesoto",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Chad",
+ "countryNameCX": "Isla de Navidad",
+ "countryNameIR": "Irán",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bisáu",
+ "countryNameUA": "Ucrania",
+ "countryNameCU": "Cuba",
+ "countryNameCO": "Colombia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Croacia",
+ "countryNameSC": "Seychelles",
+ "countryNameNL": "Países bajos",
+ "countryNameUM": "Islas Ultramarinas Menores de Estados Unidos",
+ "countryNameIM": "Isla de Man",
+ "countryNameFJ": "Fiyi",
+ "countryNameSR": "Surinam",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "Reino Unido",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Eslovenia",
+ "countryNameAM": "Armenia",
+ "countryNameAR": "Argentina",
+ "countryNamePM": "San Pedro y Miquelón",
+ "countryNameTF": "Tierras Australes y Antárticas Francesas",
+ "countryNameDO": "República Dominicana",
+ "countryNameZW": "Zimbabue",
+ "countryNameMQ": "Martinica",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "República Centroafricana",
+ "countryNameBE": "Bélgica",
+ "countryNameKM": "Comoras",
+ "countryNameLY": "Libia",
+ "countryNameIE": "Irlanda",
+ "countryNameKP": "Corea del Norte",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Eslovaquia",
+ "countryNameTC": "Islas Turcas y Caicos",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Yemen",
+ "countryNameBA": "Bosnia y Herzegovina",
+ "countryNameGP": "Guadalupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Irak",
+ "countryNameSJ": "Islas Svalbard y Jan Mayen",
+ "countryNameAX": "Islas Åland",
+ "countryNameKE": "Kenia",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermudas",
+ "countryNameFO": "Islas Feroe",
+ "countryNameBL": "San Bartolomé",
+ "countryNameLB": "Líbano",
+ "countryNameJM": "Jamaica",
+ "countryNameAF": "Afganistán",
+ "countryNameES": "España",
+ "countryNameMC": "Mónaco",
+ "countryNameSG": "Singapur",
+ "countryNameAL": "Albania",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Esuatini",
+ "countryNameBZ": "Belice",
+ "countryNameCI": "Côte d’Ivoire",
+ "countryNameTW": "Taiwán",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Islas Cook",
+ "countryNameTH": "Tailandia",
+ "countryNameHM": "Islas Heard y McDonald",
+ "countryNameGD": "Granada",
+ "countryNameUS": "Estados Unidos",
+ "countryNameAT": "Austria",
+ "countryNameKR": "República de Corea",
+ "countryNamePK": "Pakistán",
+ "countryNameDK": "Dinamarca",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palaos",
+ "countryNameET": "Etiopía",
+ "countryNameMG": "Madagascar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxemburgo",
+ "countryNameQA": "Catar",
+ "countryNameBT": "Bután",
+ "countryNameSB": "Islas Salomón",
+ "countryNameAE": "Emiratos Árabes Unidos",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua y Barbuda",
+ "countryNameMU": "Mauricio",
+ "countryNameHU": "Hungría",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Suiza",
+ "countryNamePN": "Islas Pitcairn",
+ "countryNameGL": "Groenlandia",
+ "countryNamePH": "Filipinas",
+ "countryNameMT": "Malta",
+ "countryNameKN": "San Cristóbal y Nieves",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benín",
+ "countryNameLV": "Letonia",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Autor",
+ "template": "Nombre de la plantilla"
+ },
+ "Row": {
+ "ariaLabel": "fila {0} de {1} columna {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Empiece desde cero y seleccione las propiedades que desee de la biblioteca de propiedades de inventario disponibles."
+ },
+ "SettingsCatalog": {
+ "subtitle": "Empiece de cero y seleccione la configuración que quiera en la biblioteca de valores disponibles",
+ "title": "Catálogo de configuración"
+ },
+ "Templates": {
+ "subtitle": "Las plantillas contienen grupos de valores, organizados por funcionalidad. Use una plantilla cuando no quiera compilar las directivas de forma manual o cuando quiera configurar dispositivos para acceder a las redes corporativas, por ejemplo, una configuración de Wi-Fi o VPN.",
+ "title": "Plantillas"
+ },
+ "noData": "No se han encontrado plantillas de directiva."
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Configuración de SmartScreen, aplicación recomendada de Microsoft Edge: Windows 10 en la plantilla de configuración en la nube. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Detección de puntos de conexión y respuesta"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "Aislamiento de aplicaciones y navegador",
+ "aSRApplicationControl": "Control de aplicaciones",
+ "aSRAttackSurfaceReduction": "Reglas de reducción de la superficie expuesta a ataques",
+ "aSRDeviceControl": "Control de dispositivos",
+ "aSRExploitProtection": "Protección contra vulnerabilidades",
+ "aSRWebProtection": "Protección web (Microsoft Edge, versión anterior)",
+ "aVExclusions": "Exclusiones del Antivirus de Microsoft Defender",
+ "antivirus": "Antivirus de Microsoft Defender",
+ "cloudPC": "Línea base de seguridad de Windows 365",
+ "default": "Seguridad de los puntos de conexión",
+ "defenderTest": "Demostración de Microsoft Defender para punto de conexión",
+ "diskEncryption": "BitLocker",
+ "eDR": "Detección de puntos de conexión y respuesta",
+ "edgeSecurityBaseline": "Línea base de Microsoft Edge",
+ "edgeSecurityBaselinePreview": "Versión preliminar: línea base de Microsoft Edge",
+ "editionUpgradeConfiguration": "Actualización de edición y cambio de modo",
+ "firewall": "Firewall de Windows",
+ "firewallRules": "Reglas de firewall de Windows",
+ "identityProtection": "Protección de cuentas",
+ "identityProtectionPreview": "Protección de cuentas (versión preliminar)",
+ "mDMSecurityBaseline1810": "Línea base de seguridad de MDM para Windows 10 y versiones posteriores a octubre de 2018",
+ "mDMSecurityBaseline1810Preview": "Versión preliminar: Línea base de seguridad de MDM para Windows 10 y versiones posteriores a octubre de 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Versión preliminar: Línea base de seguridad de MDM para Windows 10 para octubre de 2018 (beta)",
+ "mDMSecurityBaseline1906": "Línea base de seguridad de MDM para Windows 10 y versiones posteriores a mayo de 2019",
+ "mDMSecurityBaseline2004": "Línea base de seguridad de MDM para Windows 10 y versiones posteriores para agosto de 2020",
+ "mDMSecurityBaseline2101": "Línea de base de seguridad de MDM para Windows 10 y posteriormente diciembre de 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "Firewall de macOS",
+ "microsoftDefenderBaseline": "Línea de base de Microsoft Defender para punto de conexión",
+ "office365Baseline": "Línea de base de Microsoft Office O365",
+ "office365BaselinePreview": "Versión preliminar: Línea de base de Microsoft Office O365",
+ "securityBaselines": "Líneas base de seguridad",
+ "test": "Plantilla de prueba",
+ "testFirewallRulesSecurityTemplateName": "Reglas de Firewall de Windows (prueba)",
+ "testIdentityProtectionSecurityTemplateName": "Protección de cuentas (prueba)",
+ "windowsSecurityExperience": "Experiencia de Seguridad de Windows"
+ },
+ "Firewall": {
+ "mDE": "Firewall de Windows"
+ },
+ "FirewallRules": {
+ "mDE": "Reglas de firewall de Windows"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "Configuración de movimiento de carpetas conocidas de OneDrive: Windows 10 en la plantilla de configuración en la nube. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Protección de cuentas",
+ "administrativeTemplates": "Plantillas administrativas",
+ "androidCompliancePolicy": "Directiva de cumplimiento de Android",
+ "aospDeviceOwnerCompliancePolicy": "Directiva de cumplimiento de Android (AOSP)",
+ "applicationControl": "Control de aplicaciones para empresas",
+ "attackSurfaceReductionRules": "Reglas de reducción de la superficie expuesta a ataques",
+ "bitlocker": "BitLocker",
+ "custom": "Personalizado",
+ "deliveryOptimization": "Optimización de entrega",
+ "derivedPersonalIdentityVerificationCredential": "Credencial derivada",
+ "deviceControl": "Control de dispositivos",
+ "deviceFeatures": "Características del dispositivo",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Bloqueo de dispositivos",
+ "deviceOwner": "Perfil de trabajo de propiedad corporativa, dedicado y totalmente administrado",
+ "deviceRestrictions": "Restricciones de dispositivos",
+ "deviceRestrictionsWindows10Team": "Restricciones de dispositivos (Windows 10 Team)",
+ "domainJoinPreview": "Unión a un dominio",
+ "editionUpgradeAndModeSwitch": "Actualización de edición y cambio de modo",
+ "education": "Educación",
+ "email": "Correo electrónico",
+ "emailSamsungKnoxOnly": "Correo electrónico (solo Samsung KNOX)",
+ "endpointProtection": "Endpoint Protection",
+ "expeditedCheckin": "Configuración de administración de dispositivos móviles",
+ "exploitProtection": "Protección contra vulnerabilidades",
+ "extensions": "Extensiones",
+ "hardwareConfigurations": "Configuraciones de BIOS y otras opciones",
+ "identityProtection": "Protección de identidades",
+ "iosCompliancePolicy": "Directiva de cumplimiento de iOS",
+ "kiosk": "Pantalla completa",
+ "localUsersAndGroups": "Editar pertenencia a grupos de usuarios",
+ "macCompliancePolicy": "Directiva de cumplimiento de Mac",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Línea de base de seguridad de Aplicaciones de Microsoft 365 para empresas",
+ "microsoftDefenderAntivirus": "Antivirus de Microsoft Defender",
+ "microsoftDefenderAntivirusexclusions": "Exclusiones del Antivirus de Microsoft Defender",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender para punto de conexión (dispositivos de escritorio que ejecutan Windows 10 o versiones posteriores)",
+ "microsoftDefenderFirewallRules": "Reglas de firewall de Windows",
+ "microsoftDefenderforEndpointSecurityBaseline": "Línea base de seguridad de Microsoft Defender para punto de conexión",
+ "microsoftEdgeBaseline": "Línea base de seguridad para Microsoft Edge",
+ "mxProfileZebraOnly": "Perfil de MX (solo Zebra)",
+ "networkBoundary": "Límite de red",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Reemplazar la directiva de grupo",
+ "pkcsCertificate": "Certificado PKCS",
+ "pkcsImportedCertificate": "Certificado PKCS importado",
+ "preferenceFile": "Archivo de preferencias",
+ "presets": "Valores preestablecidos",
+ "scepCertificate": "Certificado SCEP",
+ "secureAssessmentEducation": "Evaluación segura (Educación)",
+ "securityBaselineForHololens2Advanced": "Línea base de seguridad avanzada para HoloLens 2",
+ "securityBaselineForHololens2Standard": "Línea base de seguridad Estándar para HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Línea base de seguridad para Microsoft Edge",
+ "settingsCatalog": "Catálogo de configuración",
+ "sharedMultiUserDevice": "Dispositivo multiusuario compartido",
+ "softwareUpdates": "Actualizaciones de software",
+ "trustedCertificate": "Certificado de confianza",
+ "unknown": "Desconocido",
+ "unsupported": "No compatible",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Importación de Wi-Fi",
+ "windows10CompliancePolicy": "Directiva de cumplimiento de Windows 10/11",
+ "windows10MobileCompliancePolicy": "Directiva de cumplimiento de Windows 10 Mobile",
+ "windows10XScep": "Certificado SCEP: PRUEBA",
+ "windows10XTrustedCertificate": "Certificado de confianza: PRUEBA",
+ "windows10XVPN": "VPN: PRUEBA",
+ "windows10XWifi": "WiFi: PRUEBA",
+ "windows11SecurityBaseline": "Base de seguridad de Windows 10 y versiones posteriores",
+ "windows365SecurityBaseline": "Línea base de seguridad de Windows 365",
+ "windows8CompliancePolicy": "Directiva de cumplimiento de Windows 8",
+ "windowsHealthMonitoring": "Seguimiento de estado de Windows",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Directiva de cumplimiento de Windows Phone",
+ "windowsUpdateforBusiness": "Windows Update para empresas",
+ "wiredNetwork": "Red cableada",
+ "workProfile": "Perfil de trabajo de propiedad personal"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Hacer que la actualización esté disponible gradualmente",
+ "immediateStart": "Hacer que la actualización esté disponible lo antes posible",
+ "startDateOnly": "Hacer que la actualización esté disponible en una fecha específica"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Denegación automática",
+ "autoGrant": "Concesión automática",
+ "prompt": "Pedir confirmación"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Acceso a la ubicación (general)",
+ "accessFineLocation": "Acceso a la ubicación (preciso)",
+ "addVoicemail": "Agregar correo de voz",
+ "bodySensors": "Permitir datos del sensor corporal",
+ "bodySensorsBackground": "Permitir datos del sensor del cuerpo en segundo plano",
+ "callPhone": "Realizar llamadas telefónicas",
+ "camera": "Cámara",
+ "getAccounts": "Obtener cuentas",
+ "nearbyDevices": "Dispositivos cercanos",
+ "nearbyWifiDevices": "Dispositivos Wi-Fi cercanos",
+ "postNotifications": "Publicar notificaciones",
+ "processOutgoingCalls": "Procesar llamadas salientes",
+ "readCalendar": "Calendario (lectura)",
+ "readCallLog": "Registro de llamadas (lectura)",
+ "readContacts": "Contactos (lectura)",
+ "readExternalStorage": "Almacenamiento externo (lectura)",
+ "readMediaAudio": "Audio multimedia (lectura)",
+ "readMediaImages": "Imágenes multimedia (lectura)",
+ "readMediaVideo": "Vídeo multimedia (lectura)",
+ "readPhoneState": "Estado del teléfono (lectura)",
+ "readSMS": "SMS (lectura)",
+ "receiveMMS": "MMS (recepción)",
+ "receiveSMS": "SMS (recepción)",
+ "receiveWAPPush": "Mensajes de inserción WAP (recepción)",
+ "recordAudio": "Grabar audio",
+ "sendSMS": "SMS (envío)",
+ "useSIP": "Usar el servicio SIP",
+ "writeCalendar": "Calendario (escritura)",
+ "writeCallLog": "Registro de llamadas (escritura)",
+ "writeContacts": "Contactos (escritura)",
+ "writeExternalStorage": "Almacenamiento externo (escritura)"
+ },
+ "RemoveDialog": {
+ "description": "¿Seguro que quiere quitar el permiso?",
+ "title": "Quitar"
+ },
+ "TableHeader": {
+ "permission": "Permiso",
+ "permissionGroup": "Grupo de permisos",
+ "permissionName": "Nombre del permiso",
+ "permissionState": "Estado del permiso"
+ },
+ "addButtonLabel": "+Agregar",
+ "addPermissionTableDescription": "Especifique los permisos que quiere invalidar. Si no se eligen o se especifican de forma explícita, se aplica el comportamiento predeterminado.",
+ "addPermissionsTitle": "Agregar permisos",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Más información acerca de los permisos en tiempo de ejecución de Android",
+ "permissionTableDescription": "Los permisos que se conceden aquí invalidan la directiva “Permisos de aplicación predeterminados” para las aplicaciones seleccionadas.",
+ "permissionsTitle": "Permisos"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluido",
+ "include": "Incluidos",
+ "includeAllDevicesVirtualGroup": "Incluidos",
+ "includeAllUsersVirtualGroup": "Incluidos"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Búsqueda de Microsoft como opción predeterminada",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype Empresarial",
+ "oneDrive": "OneDrive Escritorio",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "El archivo o la carpeta como requisito seleccionado.",
+ "pathToolTip": "La ruta de acceso completa del archivo o la carpeta que se detectará.",
+ "property": "Propiedad",
+ "valueToolTip": "Seleccione un valor de requisito que coincida con el método de detección seleccionado. Se debe especificar el requisito de fecha y hora en el formato local."
+ },
+ "GridColumns": {
+ "pathOrScript": "Ruta de acceso o script",
+ "type": "Tipo"
+ },
+ "Registry": {
+ "keyPath": "Ruta de acceso de la clave",
+ "keyPathTooltip": "La ruta de acceso completa de la entrada del Registro que contiene el valor como un requisito.",
+ "operator": "Operator",
+ "operatorTooltip": "Seleccione el operador para la comparación.",
+ "registryRequirement": "Requisito de clave de registro",
+ "registryRequirementTooltip": "Seleccione la comparación de requisitos de clave del Registro.",
+ "valueName": "Nombre de valor",
+ "valueNameTooltip": "El nombre del valor de Registro necesario."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Archivo",
+ "registry": "Registro",
+ "script": "Script"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Booleano",
+ "dateTime": "Fecha y hora",
+ "float": "Punto flotante",
+ "integer": "Entero",
+ "string": "Cadena",
+ "version": "Versión"
+ },
+ "duplicateName": "El nombre de script {0} ya se ha usado. Especifique otro nombre.",
+ "enforceSignatureCheck": "Exigir comprobación de firma del script",
+ "enforceSignatureCheckTooltip": "Seleccione \"Sí\" para comprobar que el script está firmado por un editor de confianza, lo que permite ejecutarlo sin advertencias ni avisos. El script se ejecutará desbloqueado. Seleccione \"No\" (predeterminado) para ejecutarlo con la confirmación del usuario final, pero sin comprobación de firma.",
+ "loggedOnCredentials": "Ejecutar este script con las credenciales de inicio de sesión",
+ "loggedOnCredentialsTooltip": "Ejecutar script mediante las credenciales del dispositivo que ha iniciado sesión.",
+ "operatorTooltip": "Seleccione el operador para la comparación de requisitos.",
+ "requirementMethod": "Seleccionar el tipo de datos de salida",
+ "requirementMethodTooltip": "Seleccione el tipo de datos usado al determinar un requisito de coincidencia de detección.",
+ "scriptContent": "Contenido del script",
+ "scriptFile": "Archivo de script",
+ "scriptFileTooltip": "Seleccione un script de PowerShell que detecte la presencia de la aplicación en el cliente. Si se detecta la aplicación, el proceso de requisitos proporcionará un código de salida con un valor de 0 y escribirá un valor de cadena en STDOUT.",
+ "scriptName": "Nombre del script",
+ "value": "Valor",
+ "valueTooltip": "Seleccione un valor de requisito que coincida con el método de detección seleccionado. Se debe especificar el requisito de fecha y hora en el formato local."
+ },
+ "bladeTitle": "Agregar una regla de requisitos",
+ "createRequirementHeader": "Cree un requisito.",
+ "header": "Configurar reglas de requisitos adicionales",
+ "label": "Reglas de requisitos adicionales",
+ "noRequirementsSelectedPlaceholder": "No se ha especificado ningún requisito.",
+ "requirementType": "Tipo de requisito",
+ "requirementTypeTooltip": "Elija el tipo de método de detección utilizado para determinar cómo se valida un requisito."
+ },
+ "architectures": "Arquitectura del sistema operativo",
+ "architecturesTooltip": "Elija las arquitecturas necesarias para instalar la aplicación.",
+ "bladeTitle": "Requisitos",
+ "diskSpace": "Espacio en disco necesario (MB)",
+ "diskSpaceTooltip": "Espacio en disco libre necesario en la unidad del sistema para instalar la aplicación.",
+ "header": "Especifique los requisitos que deben cumplir los dispositivos antes de instalar la aplicación:",
+ "maximumTextFieldValue": "El valor debe ser como máximo de {0}.",
+ "minimumCpuSpeed": "Velocidad de CPU mínima requerida (MHz)",
+ "minimumCpuSpeedTooltip": "La velocidad de CPU mínima necesaria para instalar la aplicación.",
+ "minimumLogicalProcessors": "Número mínimo de procesadores lógicos necesarios",
+ "minimumLogicalProcessorsTooltip": "El número mínimo de procesadores lógicos necesarios para instalar la aplicación.",
+ "minimumOperatingSystem": "Versión mínima del sistema operativo",
+ "minimumOperatingSystemTooltip": "Seleccione la versión mínima del sistema operativo necesaria para instalar la aplicación.",
+ "minumumTextFieldValue": "El valor debe ser como mínimo de {0}.",
+ "physicalMemory": "Memoria física requerida (MB)",
+ "physicalMemoryTooltip": "Memoria física (RAM) necesaria para instalar la aplicación.",
+ "selectorLabel": "Requisitos",
+ "validNumber": "Especifique un número válido."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filtro",
+ "assignmentFilterTypeColumnHeader": "Modo de filtro",
+ "assignmentToast": "Notificaciones del usuario final",
+ "assignmentTypeTableHeader": "TIPO DE ASIGNACIÓN",
+ "autoUpdate": "Actualizar automáticamente",
+ "deadlineTimeColumnLabel": "Fecha límite de instalación",
+ "deliveryOptimizationPriorityHeader": "Prioridad de optimización de distribución",
+ "groupTableHeader": "Grupo",
+ "installContextLabel": "Contexto de instalación",
+ "isRemovable": "Instalar como extraíble",
+ "licenseTypeLabel": "Tipo de licencia",
+ "modeTableHeader": "Modo de grupo",
+ "policySet": "Conjunto de directivas",
+ "preventAutoAppUpdate": "Impedir actualizaciones automáticas de aplicaciones",
+ "preventManagedAppBackup": "Impedir la copia de seguridad de aplicaciones de iCloud",
+ "restartGracePeriodHeader": "Período de gracia de reinicio",
+ "startTimeColumnLabel": "Disponibilidad",
+ "tracks": "Seguimientos",
+ "uninstallOnRemoval": "Desinstalar al eliminar el dispositivo",
+ "updateMode": "Prioridad de actualización",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "Aplicación web de AAD",
+ "androidEnterpriseSystemApp": "Aplicación del sistema Android Enterprise",
+ "androidForWorkApp": "Aplicación de Google Play Store administrado",
+ "androidLobApp": "Aplicación de línea de negocio Android",
+ "androidStoreApp": "Aplicación de la tienda Android",
+ "builtInAndroid": "Aplicación Android integrada",
+ "builtInApp": "Aplicación integrada",
+ "builtInIos": "Aplicación iOS integrada",
+ "iosIPadOSWebClip": "Clip web de iOS/iPadOS",
+ "iosLobApp": "Aplicación de línea de negocio iOS",
+ "iosStoreApp": "Aplicación de la tienda iOS",
+ "iosVppApp": "Aplicación del Programa de Compras por Volumen iOS",
+ "lineOfBusinessApp": "Aplicación de línea de negocio",
+ "macOSDmgApp": "Aplicación macOS (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Aplicación de línea de negocio de macOS",
+ "macOSMicrosoftDefenderApp": "ATP de Microsoft Defender (macOS)",
+ "macOSOfficeSuiteApp": "Conjunto de programas Office para macOS",
+ "macOSPkgApp": "Aplicación macOS (PKG)",
+ "macOSWebClip": "Clip web de macOS",
+ "macOsVppApp": "Aplicación del Programa de Compras por Volumen de macOS",
+ "managedAndroidLobApp": "Aplicación de línea de negocio Android administrada",
+ "managedAndroidStoreApp": "Aplicación de la tienda Android administrada",
+ "managedGooglePlayApp": "Aplicación de Google Play Store administrado",
+ "managedGooglePlayPrivateApp": "Aplicación privada de Google Play administrado",
+ "managedGooglePlayWebApp": "Vínculo web de Google Play administrado",
+ "managedIosLobApp": "Aplicación de línea de negocio iOS administrada",
+ "managedIosStoreApp": "Aplicación de la tienda iOS administrada",
+ "microsoftStoreForBusinessApp": "Aplicación de la Tienda Microsoft para Empresas",
+ "microsoftStoreForBusinessReleaseManagedApp": "Tienda Microsoft para Empresas",
+ "officeAddIn": "Complemento de Office",
+ "officeSuiteApp": "Aplicaciones de Microsoft 365 (Windows 10 y versiones posteriores)",
+ "sharePointApp": "Aplicación de SharePoint",
+ "teamsApp": "Aplicación Teams",
+ "webApp": "Vínculo web",
+ "win32CatalogApp": "Aplicación de catálogo de Windows (Win32)",
+ "winGetPublicApp": "Repositorio de la comunidad de Administrador de paquetes de Windows",
+ "winGetStoreApp": "Aplicación Microsoft Store (nuevo)",
+ "windowsAppXLobApp": "Aplicación de línea de negocio de AppX para Windows",
+ "windowsClassicApp": "Aplicación de Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 y versiones posteriores)",
+ "windowsMobileMsiLobApp": "Aplicación de línea de negocio de MSI para Windows",
+ "windowsPhone81AppXBundleLobApp": "Aplicación de línea de negocio AppX para Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "Aplicación de línea de negocio AppX para Windows Phone 8.1",
+ "windowsPhone81StoreApp": "Aplicación de la Tienda Windows Phone 8.1",
+ "windowsPhoneXapLobApp": "Aplicación de línea de negocio de XAP para Windows Phone",
+ "windowsStoreApp": "Aplicación de Microsoft Store (heredada)",
+ "windowsUniversalAppXLobApp": "Aplicación de línea de negocio de AppX para Windows Universal",
+ "windowsUniversalLobApp": "Aplicación de línea de negocio Windows universal",
+ "windowsWebApp": "Vínculo web de Windows"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluida",
+ "include": "Incluido",
+ "includeAllDevicesVirtualGroup": "Incluido",
+ "includeAllUsersVirtualGroup": "Incluido"
+ },
+ "AssignmentToast": {
+ "hideAll": "Ocultar todas las notificaciones del sistema",
+ "showAll": "Mostrar todas las notificaciones del sistema",
+ "showReboot": "Mostrar notificaciones del sistema para reinicios de equipo"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Sí",
+ "notConfigured": "No"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Segundo plano",
+ "displayText": "Descarga de contenido en {0}",
+ "foreground": "Primer plano",
+ "header": "Prioridad de optimización de distribución"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "La instalación de la aplicación puede forzar el reinicio del dispositivo",
+ "basedOnReturnCode": "Determinar comportamiento en función de códigos de retorno",
+ "force": "Intune forzará un reinicio obligatorio del dispositivo",
+ "suppress": "Ninguna acción específica"
+ },
+ "FilterType": {
+ "exclude": "Excluir",
+ "include": "Incluir",
+ "none": "Ninguno"
+ },
+ "InstallIntent": {
+ "available": "Disponible para dispositivos inscritos",
+ "availableWithoutEnrollment": "Disponible con o sin inscripción",
+ "notApplicable": "No aplicable",
+ "required": "Requerido",
+ "uninstall": "Desinstalar"
+ },
+ "SettingType": {
+ "assignmentType": "Tipo de asignación",
+ "deviceLicensing": "Tipo de licencia",
+ "installContext": "Desinstalar al eliminar el dispositivo",
+ "toastSettings": "Notificaciones del usuario final",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Predeterminado",
+ "postponed": "Pospuesto",
+ "priority": "Prioridad alta"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Error",
+ "hardReboot": "Reinicio en frío",
+ "retry": "Reintentar",
+ "softReboot": "Reinicio en caliente",
+ "success": "Correcto"
+ },
+ "Columns": {
+ "codeType": "Tipo de código",
+ "returnCode": "Código de retorno"
+ },
+ "bladeTitle": "Códigos de retorno",
+ "gridAriaLabel": "Códigos de retorno",
+ "header": "Especifique códigos de retorno para indicar el comportamiento posterior a la instalación:",
+ "onAddAnnounceMessage": "El código de retorno agregó el elemento {0} de {1}",
+ "onDeleteSuccess": "El código de retorno {0} se ha eliminado correctamente.",
+ "returnCodeAlreadyUsedValidation": "El código de retorno ya está en uso.",
+ "returnCodeMustBeIntegerValidation": "El código de retorno debe ser un entero.",
+ "returnCodeShouldBeAtLeast": "El código de retorno debe ser como mínimo {0}.",
+ "returnCodeShouldBeAtMost": "El código de retorno debe ser como máximo {0}.",
+ "selectorLabel": "Códigos de retorno"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone y iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Agregar límite de red",
+ "addNetworkBoundaryButton": "Agregar límite de red...",
+ "allowWindowsSearch": "Permitir que Windows Search busque datos corporativos cifrados y aplicaciones de la Tienda",
+ "authoritativeIpRanges": "La lista de intervalos IP de la empresa es autoritativa (no usar detección automática)",
+ "authoritativeProxyServers": "La lista de servidores proxy de la empresa es autoritativa (no usar detección automática)",
+ "boundaryType": "Tipo de límite",
+ "cloudResources": "Recursos de nube",
+ "corporateIdentity": "Identidad corporativa",
+ "dataRecoveryCert": "Cargar un certificado del Agente de recuperación de datos (DRA) para poder recuperar datos cifrados",
+ "editNetworkBoundary": "Editar límite de red",
+ "enrollmentState": "Estado de inscripción",
+ "iPv4Ranges": "Intervalos IPv4",
+ "iPv6Ranges": "Intervalos IPv6",
+ "internalProxyServers": "Servidores proxy internos",
+ "maxInactivityTime": "Cantidad máxima de tiempo permitido (en minutos) con el dispositivo inactivo que, una vez transcurrida, causará el bloqueo del dispositivo mediante PIN o contraseña",
+ "maxPasswordAttempts": "Número de errores de autenticación permitidos antes de borrar el dispositivo",
+ "mdmDiscoveryUrl": "Dirección URL de descubrimiento de MDM",
+ "mdmRequiredSettingsInfo": "Esta directiva solo se aplica a Windows 10 Anniversary Edition y versiones posteriores. Además, usa Windows Information Protection (WIP) para aplicar protección.",
+ "minimumPinLength": "Establecer el número mínimo de caracteres requeridos para el PIN",
+ "name": "Nombre",
+ "networkBoundariesGridEmptyText": "Los límites de red que agregue se mostrarán aquí",
+ "networkBoundary": "Límite de red",
+ "networkDomainNames": "Dominios de red",
+ "neutralResources": "Recursos neutros",
+ "passportForWork": "Usar Windows Hello para empresas como método para iniciar sesión en Windows",
+ "pinExpiration": "Especificar el período de tiempo (en días) que se puede usar un PIN antes de que el sistema solicite al usuario que lo cambie",
+ "pinHistory": "Especificar el número de PIN anteriores asociados a una cuenta de usuario que no se pueden volver a usar",
+ "pinLowercaseLetters": "Configurar el uso de letras minúsculas en el PIN de Windows Hello para empresas",
+ "pinSpecialCharacters": "Configurar el uso de caracteres especiales en el PIN de Windows Hello para empresas",
+ "pinUppercaseLetters": "Configurar el uso de letras mayúsculas en el PIN de Windows Hello para empresas",
+ "protectUnderLock": "Impedir que las aplicaciones accedan a los datos corporativos cuando el dispositivo está bloqueado. Se aplica únicamente a Windows 10 Mobile.",
+ "protectedDomainNames": "Dominios protegidos",
+ "proxyServers": "Servidores proxy",
+ "requireAppPin": "Deshabilitar PIN de aplicación cuando se administre el PIN del dispositivo",
+ "requiredSettings": "Valores obligatorios",
+ "requiredSettingsInfo": "Al cambiar el ámbito o quitar esta directiva, se descifrarán los datos corporativos.",
+ "revokeOnMdmHandoff": "Revocar el acceso a los datos protegidos cuando el dispositivo se inscriba en MDM",
+ "revokeOnUnenroll": "Revocar claves de cifrado al cancelar la inscripción",
+ "rmsTemplateForEdp": "Especificar el identificador de la plantilla que se va a usar para Azure RMS",
+ "showWipIcon": "Mostrar el icono de protección de datos de empresa",
+ "type": "Tipo",
+ "useRmsForWip": "Usar Azure RMS para WIP",
+ "value": "Valor",
+ "weRequiredSettingsInfo": "Esta directiva solo se aplica a Windows 10 Creators Update y versiones posteriores. Además, usa Windows Information Protection (WIP) y Windows MAM para aplicar protección.",
+ "wipProtectionMode": "Modo de Windows Information Protection",
+ "withEnrollment": "Con inscripción",
+ "withoutEnrollment": "Sin inscripción"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Árabe",
+ "bulgarian": "Búlgaro",
+ "chineseSimplified": "Chino (simplificado)",
+ "chineseTraditional": "Chino (tradicional)",
+ "croatian": "Croata",
+ "czech": "Checo",
+ "danish": "Danés",
+ "dutch": "Neerlandés",
+ "englishUK": "Inglés (Reino Unido)",
+ "englishUS": "Inglés (Estados Unidos)",
+ "estonian": "Estonio",
+ "finnish": "Finés",
+ "frenchCanada": "Francés (Canadá)",
+ "frenchFrance": "Francés (Francia)",
+ "german": "Alemán",
+ "greek": "Griego",
+ "hebrew": "Hebreo",
+ "hungarian": "Húngaro",
+ "italian": "Italiano",
+ "japanese": "Japonés",
+ "korean": "Coreano",
+ "latvian": "Letón",
+ "lithuanian": "Lituano",
+ "norwegian": "Noruego, bokmal",
+ "polish": "Polaco",
+ "portugueseBrazil": "Portugués (Brasil)",
+ "portuguesePortugal": "Portugués (Portugal)",
+ "romanian": "Rumano",
+ "russian": "Ruso",
+ "serbian": "Serbio",
+ "slovak": "Eslovaco",
+ "slovenian": "Esloveno",
+ "spanishMexico": "Español (México)",
+ "spanishSpain": "Español (España)",
+ "swedish": "Sueco",
+ "thai": "Tailandés",
+ "turkish": "Turco",
+ "ukrainian": "Ucraniano"
+ },
+ "Summary": {
+ "placeholder": "Seleccione un mensaje de notificación de los que aparecen a la izquierda para obtener una vista previa del contenido."
+ },
+ "companyContact": "Mostrar información de contacto",
+ "companyLogo": "Mostrar logotipo de la empresa",
+ "companyName": "Mostrar el nombre de la empresa",
+ "createEditDescription": "Crear o editar plantillas de mensajes de notificación.",
+ "createMessage": "Crear mensaje",
+ "deviceDetails": "Mostrar detalles del dispositivo",
+ "deviceDetailsInfoBox": "Esta configuración está desactivada de forma predeterminada, ya que la recuperación de detalles del dispositivo podría provocar un retraso en la recepción de notificaciones por correo electrónico.",
+ "editImpactInfo": "Si modifica este mensaje de notificación, afectará a todas las directivas que utilizan esta plantilla.",
+ "editMessage": "Editar mensaje",
+ "email": "correo electrónico",
+ "emailFooterTitle": "Pie de página del correo electrónico",
+ "emailHeaderFooterInfo": "La configuración de encabezado y pie de página de correo electrónico para las notificaciones de correo electrónico se basa en la configuración de personalización dentro del nodo Administrador de inquilinos en Endpoint Manager.",
+ "emailHeaderTitle": "Encabezado del correo electrónico",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Configurar opciones de personalización",
+ "formSubTitle": "Crear o modificar correos electrónicos de notificación",
+ "headerFooterSettingsTab": "Configuración de encabezado y pie de página",
+ "imgPreview": "Vista previa de imagen",
+ "infotext": "Seleccione un mensaje de notificación. Para crear una notificación, visite Notificación en la sección Administrar de la carga de trabajo Establecer la compatibilidad con dispositivos.",
+ "iwLink": "Mostrar vínculo de sitio web del portal de empresa",
+ "listEmpty": "No hay plantillas de mensajes.",
+ "listEmptySelectOnly": "No hay plantillas de mensajes. Para crear una nueva notificación, visite Notificaciones en la sección Administrar de la carga de trabajo Establecer la compatibilidad con dispositivos.",
+ "listSubTitle": "Lista de plantillas de mensajes de notificación",
+ "listTitle": "Plantillas de mensaje de notificación",
+ "localizedNotificationMessageTemplates": "Plantillas de mensajes de notificación localizadas",
+ "messageAssigned": "No puede eliminar esta plantilla de mensaje, porque la están utilizando una o varias directivas de cumplimiento.",
+ "messageCapitalized": "Plantilla de mensaje de notificación",
+ "messageLowercase": "plantilla de mensaje de notificación",
+ "missingDefaultError": "Seleccionar una plantilla predeterminada",
+ "notificationMessageTemplates": "Plantillas de mensaje de notificación",
+ "rowValidationError": "Se requiere al menos una plantilla de mensaje",
+ "selectDescription": "Seleccione un mensaje de notificación. Para crear una nueva notificación, visite Notificaciones en la sección Administrar de la carga de trabajo Establecer la compatibilidad con dispositivos.",
+ "tenantValueText": "Valor de inquilino",
+ "testEmailLabel": "Enviar una vista previa del correo electrónico",
+ "localeLabel": "Configuración regional",
+ "isDefaultLocale": "Predeterminado"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Configure los dispositivos para el aprovisionamiento inicial.",
+ "title": "Preparación del dispositivo"
+ },
+ "EnrollmentSettings": {
+ "description": "Configure las opciones de inscripción, como bloquear la inscripción y asignarlas a los usuarios.",
+ "title": "Configuración de la inscripción"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Configure las opciones que los usuarios pueden usar para recuperar Windows desde una unidad flash de arranque.",
+ "menuTitle": "Configuración de recuperación del sistema operativo Windows"
+ },
+ "coManagementAuthorityDesc": "Establezca la configuración de administración conjunta para la integración de Configuration Manager.",
+ "coManagementAuthorityTitle": "Configuración de administración conjunta ",
+ "deploymentProfiles": "Perfiles de Windows AutoPilot Deployment",
+ "description": "Obtenga información sobre las siete formas diferentes en que los usuarios o administradores pueden inscribir una PC con Windows 10/11 en Intune.",
+ "descriptionLabel": "Métodos de inscripción de Windows",
+ "enrollmentStatusPage": "Página de estado de inscripción"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Seleccione el número de bits que contiene la clave.",
+ "keyUsage": "Especifique la acción cifrada que es necesaria para el intercambio de la clave pública del certificado.",
+ "renewalThreshold": "Especifique el porcentaje (entre uno y 99 por ciento) de duración restante del certificado que se permite antes de que un dispositivo pueda solicitar la renovación del certificado. La cantidad recomendada en Intune es el 20 %. (1 a 99)",
+ "rootCert": "Elija un perfil de certificado de CA raíz previamente configurado y asignado. El certificado de CA debe coincidir con el certificado raíz de la CA que emite el certificado para este perfil (el que está configurando actualmente).",
+ "scepServerUrl": "Escriba una dirección URL para el servidor NDES que emite certificados mediante SCEP (debe ser HTTPS). Por ejemplo, https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Agregar una o más direcciones URL para el servidor NDES que emite certificados mediante SCEP (debe ser HTTPS). Por ejemplo, https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Nombre alternativo del firmante",
+ "subjectNameFormat": "Formato de nombre del firmante",
+ "validityPeriod": "La cantidad de tiempo restante antes de que expire el certificado. Escriba un valor que sea igual o inferior al período de validez que se muestra en la plantilla de certificado. El valor predeterminado se establece en un año."
+ },
+ "appInstallContext": "Esta opción especifica el contexto de la instalación que se asociará a la aplicación. Para aplicaciones de modo dual, seleccione el contexto que quiere usar en esta aplicación. Para el resto de aplicaciones, esta opción se selecciona previamente según el paquete y no se puede modificar.",
+ "autoUpdateMode": "Configure la prioridad de actualización de la aplicación. Seleccione Predeterminado para requerir que el dispositivo esté conectado a WiFi, que se cargue y que no se use activamente antes de actualizar la aplicación. Seleccione Prioridad alta para actualizar la aplicación tan pronto como el desarrollador haya publicado la aplicación, independientemente del estado de cargo, la funcionalidad WiFi o la actividad del usuario final en el dispositivo. Seleccione Pospuesto para impedir las actualizaciones de la aplicación durante un máximo de 90 días. La prioridad alta solo surtirá efecto en los dispositivos DO",
+ "configurationSettingsFormat": "Texto de formato de opciones de configuración",
+ "ignoreVersionDetection": "Establezca esta opción en \"Sí\" para las aplicaciones que el desarrollador propio actualiza automáticamente (por ejemplo, Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Seleccione \"Sí\" para las aplicaciones que el desarrollador de aplicaciones actualiza automáticamente o para comprobar solamente el valor bundleID de la aplicación antes de la instalación. Seleccione \"No\" para comprobar el número de versión y el valor bundleID de la aplicación antes de la instalación.",
+ "installAsManagedMacOSLobApp": "Esta configuración solo se aplica a macOS 11 y versiones posteriores. La aplicación se instalará, pero no se administrará en macOS 10.15 y versiones anteriores.",
+ "installContextDropdown": "Seleccione el contexto de instalación adecuado. En el contexto de usuario la aplicación se instala solo para el usuario de destino, mientras que en el contexto de dispositivo la aplicación se instala para todos los usuarios del dispositivo.",
+ "ldapUrl": "Este es el nombre de host de LDAP en el que los clientes pueden obtener las claves de cifrado públicas para los destinatarios de correo electrónico. Los correos electrónicos se cifrarán cuando haya una clave disponible. Formatos admitidos:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Seleccione los permisos en tiempo de ejecución de la aplicación asociada.",
+ "policyAssociatedApp": "Seleccione la aplicación a la que se asociará esta directiva.",
+ "policyConfigurationSettings": "Seleccione el método que quiere usar para definir las opciones de configuración de esta directiva.",
+ "policyDescription": "Opcionalmente, escriba una descripción para esta directiva de configuración.",
+ "policyEnrollmentType": "Elija si esta configuración se administra a través de la administración de dispositivos o aplicaciones creadas con el SDK de Intune.",
+ "policyName": "Escriba un nombre para esta directiva de configuración.",
+ "policyPlatform": "Seleccione la plataforma a la que se aplicará esta directiva de configuración de aplicaciones.",
+ "policyProfileType": "Seleccionar los tipos de perfil de dispositivo a los que se aplicará este perfil de configuración de la aplicación",
+ "policySMime": "Configurar las opciones de cifrado y firma S/MIME para Outlook.",
+ "sMimeDeployCertsFromIntune": "Especifique si se van a entregar o no certificados S/MIME de Intune para su uso con Outlook.\r\nIntune puede implementar automáticamente certificados de firma y cifrado para los usuarios a través del Portal de empresa.",
+ "sMimeEnable": "Especificar si los controles S/MIME se habilitan o no al redactar un correo electrónico",
+ "sMimeEnableAllowChange": "Especifique si el usuario tiene permiso para cambiar el valor Habilitar S/MIME.",
+ "sMimeEncryptAllEmails": "Especifique si se deben cifrar o no todos los mensajes de correo electrónico.\r\nEl cifrado convierte los datos en texto cifrado para que solo el destinatario deseado pueda leerlos.",
+ "sMimeEncryptAllEmailsAllowChange": "Especifique si el usuario tiene permiso para cambiar el valor Cifrar todos los correos electrónicos.",
+ "sMimeEncryptionCertProfile": "Especifique el perfil de certificado para el cifrado de correo electrónico.",
+ "sMimeSignAllEmails": "Especifique si se deben firmar o no todos los mensajes de correo electrónico.\r\nCon la firma digital se comprueba la autenticidad del correo electrónico y se garantiza que el contenido no se ha alterado en tránsito.",
+ "sMimeSignAllEmailsAllowChange": "Especifique si el usuario tiene permiso para cambiar el valor Firmar todos los correos electrónicos.",
+ "sMimeSigningCertProfile": "Especifique el perfil de certificado para la firma de correo electrónico.",
+ "sMimeUserNotificationType": "Método para notificar a los usuarios que deben abrir el Portal de empresa a fin de recuperar los certificados S/MIME para Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} se incluye en uno o más conjuntos de directivas. Si elimina {0}, ya no se podrá asignar mediante dichos conjuntos. ¿Quiere eliminarla de todas formas?",
+ "contentWithError": "{0} puede estar incluida en uno o varios conjuntos de directivas. Si elimina {0}, ya no se podrá asignar mediante dichos conjuntos. ¿Quiere eliminarla de todos modos?",
+ "header": "¿Seguro que quiere eliminar esta restricción?"
+ },
+ "DeviceLimit": {
+ "description": "Especifique el número máximo de dispositivos que un usuario puede inscribir.",
+ "header": "Restricciones de límite de dispositivos",
+ "info": "Define cuántos dispositivos puede inscribir cada usuario."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Debe ser 1.0 o posterior.",
+ "android": "Escriba un número de versión válido. Ejemplos: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Escriba un número de versión válido. Ejemplos: 5.0, 5.1.1",
+ "iOS": "Escriba un número de versión válido. Ejemplos: 9.0, 10.0, 9.0.2",
+ "mac": "Escriba un número de versión válido. Ejemplos: 10, 10.10, 10.10.1",
+ "min": "El valor mínimo no puede ser inferior a {0}",
+ "minMax": "La versión mínima no puede ser superior a la versión máxima.",
+ "windows": "Debe ser 10.0 o superior. Déjela en blanco para permitir dispositivos 8.1",
+ "windowsMobile": "Debe ser 10.0 o superior. Déjela en blanco para permitir dispositivos 8.1"
+ },
+ "allPlatformsBlocked": "Todas las plataformas de dispositivos están bloqueadas. Permita que la inscripción de la plataforma habilite la configuración de la plataforma.",
+ "blockManufacturerPlaceHolder": "Nombre del fabricante",
+ "blockManufacturersHeader": "Fabricantes bloqueados",
+ "cannotRestrict": "No se admite la restricción.",
+ "configurationDescription": "Especifica las restricciones de configuración de plataforma que deben cumplirse para inscribir un dispositivo. Use directivas de cumplimiento para restringir los dispositivos una vez inscritos. Defina las versiones como principal.secundaria.compilación. Las restricciones de versión solo se aplican a los dispositivos inscritos en el Portal de empresa. Intune clasifica los dispositivos como propiedad personal de forma predeterminada. Para clasificarlos como propiedad corporativa, se deben tomar medidas adicionales.",
+ "configurationDescriptionLabel": "Más información sobre cómo establecer restricciones de inscripción",
+ "configurations": "Configurar plataformas",
+ "deviceManufacturer": "Fabricante del dispositivo",
+ "header": "Restricciones de tipo de dispositivo",
+ "info": "Define qué plataformas, versiones y tipos de administración pueden inscribirse.",
+ "manufacturer": "Fabricante",
+ "max": "Máx.",
+ "maxVersion": "Versión máxima",
+ "min": "Mín.",
+ "minVersion": "Versión mínima",
+ "newPlatforms": "Ha permitido nuevas plataformas. Considere la posibilidad de actualizar Configuraciones de plataforma.",
+ "personal": "Propiedad personal",
+ "platform": "Plataforma",
+ "platformDescription": "Puede permitir la inscripción de las plataformas siguientes. Bloquee simplemente las plataformas que no vaya a admitir. Las plataformas permitidas pueden configurarse con restricciones de inscripción adicionales.",
+ "platformSettings": "Configuración de plataforma",
+ "platforms": "Seleccionar plataformas",
+ "platformsSelected": "{0} plataformas seleccionadas",
+ "type": "Tipo",
+ "versions": "versiones",
+ "versionsRange": "Permitir intervalo mín./máx.:",
+ "windowsTooltip": "Restringe la inscripción a través de la administración de dispositivos móviles. No restringe la instalación del agente de PC. Solo se admiten las versiones de Windows 10 y Windows 11. Deje las versiones en blanco para permitir Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Las prioridades de restricción se guardaron correctamente."
+ },
+ "Row": {
+ "announce": "Prioridad: {0}. Nombre: {1}. Asignadο: {2}"
+ },
+ "Table": {
+ "deployed": "Implementada",
+ "name": "Nombre",
+ "priority": "Prioridad"
+ },
+ "Type": {
+ "limit": "Restricción de límite de dispositivos",
+ "type": "Restricción de tipo de dispositivo"
+ },
+ "allUsers": "Todos los usuarios",
+ "androidRestrictions": "Restricciones de Android",
+ "create": "Crear restricción",
+ "defaultLimitDescription": "Esta es la restricción de límite de dispositivos predeterminada aplicada con la prioridad más baja a todos los usuarios, independientemente de la pertenencia a grupos.",
+ "defaultTypeDescription": "Esta es la restricción de tipo de dispositivo predeterminada aplicada con la prioridad más baja a todos los usuarios, independientemente de la pertenencia a grupos.",
+ "defaultWhfbDescription": "Esta es la configuración de Windows Hello para empresas predeterminada que se aplica con la prioridad más baja a todos los usuarios, independientemente de la pertenencia a grupos.",
+ "deleteMessage": "Los usuarios afectados se verán restringidos por la siguiente restricción de prioridad más alta asignada o la predeterminada, si no se asigna ninguna otra.",
+ "deleteTitle": "¿Está seguro de que quiere eliminar la restricción {0}?",
+ "descriptionHint": "Párrafo breve que describe el nivel de restricción o uso corporativo que caracteriza la configuración de la restricción.",
+ "edit": "Editar restricción",
+ "info": "Un dispositivo debe cumplir las restricciones de inscripción de prioridad más alta asignadas a su usuario. Puede arrastrar una restricción de dispositivo para cambiar su prioridad. Las restricciones predeterminadas tienen la prioridad más baja y se aplican a las inscripciones sin usuario. Además, se pueden editar, pero no eliminarse.",
+ "iosRestrictions": "Restricciones de iOS",
+ "mDM": "MDM",
+ "macRestrictions": "Restricciones para macOS",
+ "maxVersion": "Versión máxima",
+ "minVersion": "Versión mínima",
+ "nameHint": "Este será el primer atributo principal visible para identificar el conjunto de restricciones.",
+ "noAssignmentsStatusBar": "Asigne la restricción al menos a un grupo. Haga clic en Propiedades.",
+ "nonAdminForbiddenCreateError": "Debe ser un administrador global o de servicios de Intune para crear, editar o eliminar restricciones.",
+ "nonAdminForbiddenEdit": "Debe ser administrador para editar las restricciones.",
+ "notFound": "La restricción no se ha encontrado. Puede que ya se haya eliminado.",
+ "personallyOwned": "Dispositivos de propiedad personal",
+ "restriction": "Restricción",
+ "restrictionLowerCase": "restricción",
+ "restrictionType": "Restriction type",
+ "selectType": "Seleccionar el tipo de restricción",
+ "selectValidation": "Seleccione una plataforma.",
+ "typeHint": "Elija Restricción de tipo de dispositivo para restringir las propiedades del dispositivo. Elija Restricción de límite de dispositivos para restringir el número de dispositivos por usuario.",
+ "typeRequired": "Se requiere el tipo de restricción.",
+ "winPhoneRestrictions": "Restricciones de Windows Phone",
+ "windowsECv1Info": "Las restricciones de inscripción más antiguas no se pueden editar ni volver a priorizar, solo eliminar.",
+ "windowsECv2Info": "Puede priorizar las restricciones de inscripción arrastrándolas y soltándolas. Vea a continuación las restricciones predeterminadas y preconfiguradas. Todas las nuevas restricciones de inscripción tendrán mayor prioridad que las restricciones predeterminadas y preconfiguradas.",
+ "windowsRestrictions": "Restricciones de Windows",
+ "windowsRestrictionsPreview": "Restricciones de Windows basadas en filtros (versión preliminar)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 día",
+ "twoDays": "2 días",
+ "zeroDays": "0 días"
+ },
+ "SecurityTemplate": {
+ "aSR": "Reducción de la superficie expuesta a ataques",
+ "accountProtection": "Protección de cuentas",
+ "allDevices": "Todos los dispositivos",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Informes de Antivirus (vista previa)",
+ "conditionalAccess": "Acceso condicional",
+ "deviceCompliance": "Conformidad de dispositivos",
+ "diskEncryption": "Cifrado de disco",
+ "eDR": "Detección de puntos de conexión y respuesta",
+ "ePM": "Administración de privilegios de punto de conexión",
+ "firewall": "Firewall",
+ "helpSupport": "Ayuda y soporte técnico",
+ "setup": "Instalación",
+ "wdapt": "Microsoft Defender for Endpoint"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Configuración de protección de datos"
+ },
+ "OrganizeMailByThread": {
+ "title": "Organizar correo por hilo",
+ "tooltip": "El comportamiento predeterminado de Outlook es empaquetar conversaciones de correo en una vista de conversación con hilos. Si esta opción está deshabilitada, Outlook mostrará cada correo electrónico por separado y no los agrupará por hilos."
+ },
+ "Sync": {
+ "header": "Configuración de la aplicación para la sincronización de campos de los contactos con los contactos nativos"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
+ "allowBiometricsTitle": "Requerir información biométrica para acceder a la aplicación",
+ "allowBiometricsTooltip": "Puede que se requiera información biométrica (como TouchID o FaceID) para el acceso de los usuarios a la aplicación en su dispositivo. En caso de requerirse, dicha información se usa junto con el método de autenticación seleccionado en el perfil. Esta configuración no debe habilitarse si se han implementado directivas de protección de aplicaciones de Intune, ya que estas incluyen requisitos para el acceso a los datos administrados. Si se habilitan ambas opciones, se producirán múltiples solicitudes de acceso para Outlook Mobile. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como desactivada.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
+ "allowCalendarNotificationsTitle": "Notificaciones de calendario",
+ "allowCalendarNotificationsTooltip": "Permitir que las notificaciones del calendario muestren los detalles completos cuando la configuración de directiva de App Protection \"Notificaciones de datos de la organización\" esté establecida en \"Bloquear datos de la organización\".",
+ "allowDefaultAppSignatureTitle": "Firma de aplicación predeterminada",
+ "allowDefaultAppSignatureTooltip": "La firma de aplicación predeterminada indica si la aplicación usará \\\"Obtener Outlook para iOS\\\" como firma predeterminada durante la composición del mensaje. Si la configuración está desactivada, no se usará la firma predeterminada. Sin embargo, los usuarios pueden agregar su propia firma. Cuando se establece como Sin configurar, la configuración de aplicación predeterminada se establece en Activado.",
+ "allowExternalRecipientsMailTipTitle": "Información sobre correo de destinatarios externos",
+ "allowExternalRecipientsMailTipTooltip": "La opción Información sobre correo de destinatarios externos aparece si el remitente agrega un destinatario externo o un grupo de distribución que contiene destinatarios externos. Esta información de correo electrónico indica a los remitentes si el mensaje que redactan va a salir de la organización, lo que les ayuda a tomar las decisiones correctas respecto al lenguaje, tono y contenido. Disponible solo para las cuentas de Exchange Online y las cuentas locales que usan la autenticación moderna híbrida. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada.",
+ "allowFocusedInboxTitle": "Bandeja de entrada Prioritarios",
+ "allowFocusedInboxTooltip": "La Bandeja de entrada Prioritarios separa la bandeja de entrada en dos pestañas: Prioritarios y Otros. Los correos electrónicos más importantes están en la pestaña Prioritarios y el resto en la pestaña Otros, con acceso fácil pero por separado. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
+ "allowMailNotificationsTitle": "Notificaciones de correo",
+ "allowMailNotificationsTooltip": "Este valor especifica si Outlook permite notificaciones por correo electrónico. Si se establece en No, se deshabilitan las notificaciones por correo electrónico.",
+ "allowOrgDataOnWearablesTitle": "Datos de la organización en dispositivos ponibles",
+ "allowOrgDataOnWearablesTooltip": "Este valor especifica si se pueden sincronizar datos de Outlook en un dispositivo ponible. Si se establece en No, se deshabilita la sincronización en dispositivos ponibles.",
+ "allowSaveContactsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración de sincronización de contactos.",
+ "allowSaveContactsTitle": "Guardar contactos",
+ "allowSaveContactsTooltip": "Al guardar contactos en la libreta de direcciones nativa del dispositivo móvil, se pueden vincular las llamadas y mensajes de texto nuevos a los contactos de Outlook existentes del usuario. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como desactivada.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
+ "allowSmartReplyTitle": "Respuestas sugeridas",
+ "allowSmartReplyTooltip": "Al abrir un mensaje, Outlook puede sugerir respuestas debajo de este. Si selecciona una de las respuestas sugeridas, puede editarla antes de enviarla. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada.",
+ "allowUserChangeGeneralToolTip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
+ "allowUserChangeTitle": "Permitir que el usuario cambie la configuración",
+ "blockExternalImagesAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
+ "blockExternalImagesTitle": "Bloquear imágenes externas",
+ "blockExternalImagesTooltip": "Cuando el bloqueo de imágenes externas está habilitado, la aplicación impide la descarga de imágenes hospedadas en Internet que están insertadas en el cuerpo del mensaje. Si se establece como no configurado, la aplicación establece el valor Desactivado de forma predeterminada.",
+ "disableAddinsTitle": "Uso permitido de complementos",
+ "disableAddinsTooltip": "De forma predeterminada, una directiva de protección de aplicaciones permite a los usuarios usar complementos de terceros, pero se puede usar para bloquear complementos con la configuración \"Sincronizar datos de aplicaciones administradas por directivas con complementos o aplicaciones nativas\". Si estableciera esta opción en \"Desactivado\", se bloquearán los complementos cuando la configuración de la directiva de protección de aplicaciones esté establecida en Permitida.",
+ "discoverFeedTitle": "Fuente de detección",
+ "discoverFeedTooltip": "Fuente de detección destaca los archivos de Office a los que accede con más frecuencia. Esta fuente se habilita de forma predeterminada si Delve está habilitado para el usuario. Si está sin configurar, la configuración de la aplicación predeterminada se establece como Activa.",
+ "enableSMIMETitle": "Habilitar S/MIME",
+ "enableSMIMETooltip": "Especifique si los controles S/MIME se habilitan o no al redactar un correo electrónico.",
+ "encryptAllEmails": "Cifrar todos los correos electrónicos",
+ "encryptAllEmailsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar el valor Cifrar todos los correos electrónicos.",
+ "encryptAllEmailsTooltip": "Especifique si se deben cifrar todos los mensajes de correo electrónico. El cifrado convierte los datos en texto cifrado para que solo el destinatario deseado pueda leerlos.",
+ "ldapUrl": "DIRECCIÓN URL DE LDAP",
+ "ldapUrlTooltip": "Este es el nombre de host de LDAP en el que los clientes pueden obtener las claves de cifrado públicas para los destinatarios de correo electrónico. Los correos electrónicos se cifrarán cuando haya una clave disponible. Formatos admitidos: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar la configuración.",
+ "nativeCalendarSyncMAMOnlyTitle": "Permitir sincronización de calendarios",
+ "nativeCalendarSyncMAMOnlyTooltip": "De forma predeterminada, una directiva de protección de aplicaciones permite la sincronización del calendario con la aplicación Calendario nativa, pero se puede usar para bloquear la disponibilidad de sincronización del calendario. Esta configuración funciona con independencia de la configuración de la directiva de protección de aplicaciones y permite a las organizaciones definir si la sincronización del calendario está disponible para la cuenta profesional o educativa.",
+ "nativeCalendarSyncTitle": "Sincronizar calendarios",
+ "nativeCalendarSyncTooltip": "De forma predeterminada, una directiva de protección de aplicaciones permite la sincronización del calendario con la aplicación Calendario nativa, pero se puede usar para bloquear la disponibilidad de sincronización del calendario con la configuración \"Sincronizar datos de aplicaciones administradas por la directiva con complementos o aplicaciones nativas\". Si estableciera esta opción en \"Desactivado\", se bloqueará la sincronización del calendario cuando la configuración de la directiva de protección de aplicaciones esté establecida en Permitida.",
+ "playMyEmailsTitle": "Reproducir mis correos electrónicos",
+ "playMyEmailsTooltip": "La característica Reproducir mis correos electrónicos no está habilitada de forma predeterminada en la aplicación, pero se promueve a los usuarios aptos mediante un banner en la bandeja de entrada. Si se establece en Desactivada, no se promociona a los usuarios aptos en la aplicación. Los usuarios pueden optar por habilitar manualmente Reproducir mis correos electrónicos desde la propia aplicación, aunque la característica esté establecida como Desactivada. Si se establece como Sin configurar, la configuración predeterminada de la aplicación es Activada y la característica se promoverá a los usuarios aptos.",
+ "signAllEmails": "Firmar todos los correos electrónicos",
+ "signAllEmailsAllowUserChangeTooltip": "Especifique si el usuario tiene permiso para cambiar el valor Firmar todos los correos electrónicos.",
+ "signAllEmailsTooltip": "Especifique si se deben firmar todos los mensajes de correo electrónico. Con la firma digital se comprueba la autenticidad del correo electrónico y se garantiza que el contenido no se haya alterado en tránsito.",
+ "syncAddressTitle": "Dirección",
+ "syncAddressTooltip": "Este valor especifica si la dirección del contacto debe sincronizarse con los contactos nativos.",
+ "syncBirthdayTitle": "Cumpleaños",
+ "syncBirthdayTooltip": "Este valor especifica si el cumpleaños del contacto debe sincronizarse con los contactos nativos.",
+ "syncCompanyTitle": "Compañía",
+ "syncCompanyTooltip": "Este valor especifica si el nombre de la empresa del contacto debe sincronizarse con los contactos nativos.",
+ "syncDepartmentTitle": "Departamento",
+ "syncDepartmentTooltip": "Este valor especifica si el departamento del contacto debe sincronizarse con los contactos nativos.",
+ "syncEmailAddressTitle": "Dirección de correo electrónico",
+ "syncEmailAddressTooltip": "Este valor especifica si la dirección de correo electrónico del contacto debe sincronizarse con los contactos nativos.",
+ "syncInstantMessagingAddressTitle": "Dirección de mensajería instantánea",
+ "syncInstantMessagingAddressTooltip": "Este valor especifica si la dirección de mensajería instantánea del contacto debe sincronizarse con los contactos nativos.",
+ "syncJobTitleTitle": "Puesto",
+ "syncJobTitleTooltip": "Este valor especifica si el puesto del contacto debe sincronizarse con los contactos nativos.",
+ "syncNicknameTitle": "Alias",
+ "syncNicknameTooltip": "Este valor especifica si el alias del contacto debe sincronizarse con los contactos nativos.",
+ "syncNotesTitle": "Notes",
+ "syncNotesTooltip": "Este valor especifica si las notas del contacto deben sincronizarse con los contactos nativos.",
+ "syncPhoneHomeFaxNumberTitle": "Número de fax particular",
+ "syncPhoneHomeFaxNumberTooltip": "Este valor especifica si el número de fax particular del contacto debe sincronizarse con los contactos nativos.",
+ "syncPhoneHomeNumberTitle": "Número de teléfono particular",
+ "syncPhoneHomeNumberTooltip": "Este valor especifica si el número de teléfono particular del contacto debe sincronizarse con los contactos nativos.",
+ "syncPhoneMobileNumberTitle": "Número de teléfono móvil",
+ "syncPhoneMobileNumberTooltip": "Este valor especifica si el número de teléfono móvil del contacto debe sincronizarse con los contactos nativos.",
+ "syncPhoneOtherNumberTitle": "Otro número de teléfono",
+ "syncPhoneOtherNumberTooltip": "Este valor especifica si el otro número de teléfono del contacto debe sincronizarse con los contactos nativos.",
+ "syncPhonePagerNumberTitle": "Número de buscapersonas",
+ "syncPhonePagerNumberTooltip": "Este valor especifica si el número de buscapersonas del contacto debe sincronizarse con los contactos nativos.",
+ "syncPhoneWorkFaxNumberTitle": "Número de fax del trabajo",
+ "syncPhoneWorkFaxNumberTooltip": "Este valor especifica si el número de fax del trabajo del contacto debe sincronizarse con los contactos nativos.",
+ "syncPhoneWorkNumberTitle": "Número de teléfono del trabajo",
+ "syncPhoneWorkNumberTooltip": "Este valor especifica si el número de teléfono del trabajo debe sincronizarse con los contactos nativos.",
+ "syncPrefixTitle": "Prefijo del nombre",
+ "syncPrefixTooltip": "Este valor especifica si el prefijo del nombre del contacto debe sincronizarse con los contactos nativos.",
+ "syncSuffixTitle": "Sufijo del nombre",
+ "syncSuffixTooltip": "Este valor especifica si el sufijo del nombre del contacto debe sincronizarse con los contactos nativos.",
+ "textPredictionsTitle": "Predicciones de texto",
+ "textPredictionsTooltip": "Outlook puede sugerir palabras y frases al redactar mensajes. Cuando Outlook ofrezca una sugerencia, deslice rápidamente el dedo para aceptarla. Cuando se define como no configurada, la configuración de la aplicación predeterminada se establece en Activada.",
+ "themesEnabledTitle": "Temas habilitados",
+ "themesEnabledTooltip": "Especifique si el usuario puede usar un tema visual personalizado."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Use estos valores para mantenerse informado acerca de qué usuarios instalan aplicaciones que no están aprobadas para su uso en la empresa. Seleccione el tipo de lista de aplicaciones restringidas:
\r\n Aplicaciones prohibidas: es una lista de las aplicaciones sobre las que desea que se le informe cuando los usuarios las instalan. \r\n Aplicaciones aprobadas: es una lista de las aplicaciones que están aprobadas para su uso en la empresa. Cuando los usuarios instalan una aplicación que no está en esta lista, se le notifica. \r\n ",
+ "androidZebraMxZebraMx": "Cargue un perfil de MX en formato XML para configurar los dispositivos Zebra.",
+ "iosDeviceFeaturesAirprint": "Use estos valores para configurar los dispositivos iOS a fin de conectarse automáticamente a las impresoras compatibles con AirPrint de la red. Necesita la dirección IP y la ruta de acceso de recurso de las impresoras.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Configure una extensión de la aplicación que habilite el inicio de sesión único (SSO) para los dispositivos que ejecutan iOS 13.0 o versiones posteriores.",
+ "iosDeviceFeaturesHomeScreenLayout": "Configure la distribución de las pantallas de inicio y del Dock en los dispositivos iOS. Algunos dispositivos pueden tener límites en cuanto al número de elementos que se pueden mostrar.",
+ "iosDeviceFeaturesIOSWallpaper": "Muestra una imagen que aparecerá en la pantalla de inicio o la pantalla de bloqueo de los dispositivos iOS.\r\n Para mostrar una imagen única en cada ubicación, cree un perfil con la imagen de la pantalla de bloqueo y otro con la de la pantalla de inicio.\r\n A continuación, asigne ambos perfiles a sus usuarios.\r\n \r\n
\r\n
Tamaño máximo de archivo: 750 KB
\r\n
Tipo de archivo: PNG, JPG o JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Especificar la configuración de notificación de las aplicaciones. Compatible con iOS 9.3 y versiones posteriores.",
+ "iosDeviceFeaturesSharedDevice": "Especifica el texto opcional que se muestra en la pantalla bloqueada. Se admite en iOS 9.3 y versiones posteriores. Más información",
+ "iosGeneralApplicationRestrictions": "Use estos valores para mantenerse informado acerca de qué usuarios instalan aplicaciones que no están aprobadas para su uso en la empresa. Seleccione el tipo de lista de aplicaciones restringidas:
\r\n Aplicaciones prohibidas: es una lista de las aplicaciones sobre las que desea que se le informe cuando los usuarios las instalan. \r\n Aplicaciones aprobadas: es una lista de las aplicaciones que están aprobadas para su uso en la empresa. Cuando los usuarios instalan una aplicación que no está en esta lista, se le notifica. \r\n ",
+ "iosGeneralApplicationVisibility": "Use la lista Aplicaciones visibles para especificar las aplicaciones de iOS que el usuario puede ver o iniciar. Use la lista Aplicaciones ocultas para especificar las aplicaciones de iOS que el usuario no puede ver ni iniciar.",
+ "iosGeneralAutonomousSingleAppMode": "Las aplicaciones que se agregan a esta lista y se asignan a un dispositivo pueden bloquearlo de forma que solo ejecute esa aplicación una vez que se ha iniciado, o bien bloquear el dispositivo mientras se ejecuta una acción determinada (por ejemplo, hacer un examen). Una vez completada la acción, o si se quita la restricción, el dispositivo vuelve a su estado normal.",
+ "iosGeneralKiosk": "El modo de pantalla completa bloquea varias configuraciones en un dispositivo o especifica la aplicación que puede ejecutarse en este. Puede ser útil, por ejemplo, en una tienda o entornos similares, en los que un dispositivo debe ejecutar una única aplicación de demostración.",
+ "macDeviceFeaturesAirprint": "Use estas opciones para configurar los dispositivos macOS de forma que se conecten automáticamente a impresoras compatibles con AirPrint de su red. Necesitará la dirección IP y la ruta de acceso a los recursos de sus impresoras.",
+ "macDeviceFeaturesAssociatedDomains": "Configure los dominios asociados para compartir datos y credenciales de inicio de sesión entre las aplicaciones y los sitios web de su organización. Este perfil se puede aplicar a los dispositivos que ejecutan macOS 10.15 o versiones posteriores.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Configure una extensión de la aplicación que habilite el inicio de sesión único (SSO) para los dispositivos que ejecutan macOS 10.15 o versiones posteriores.",
+ "macDeviceFeaturesLoginItems": "Elija qué aplicaciones, archivos y carpetas se abren cuando los usuarios inician sesión en los dispositivos. Si no quiere que los usuarios cambien la forma en que se abren las aplicaciones seleccionadas, puede ocultar la aplicación en la configuración del usuario.",
+ "macDeviceFeaturesLoginWindow": "Configure la apariencia de la pantalla de inicio de sesión de macOS y las funciones disponibles para los usuarios antes y después de iniciar sesión.",
+ "macExtensionsKernelExtensions": "Use estas opciones para configurar la directiva de extensión de kernel en dispositivos Mac OS que ejecutan 10.13.2 o posterior.",
+ "macGeneralDomains": "Los correos electrónicos que el usuario envía o recibe y no coinciden con los dominios que especifique aquí se marcarán como de no confianza.",
+ "windows10EndpointProtectionApplicationGuard": "Al utilizar Microsoft Edge, la Protección de aplicaciones de Microsoft Defender protege su entorno de sitios que su organización no ha definido todavía como de confianza. Cuando los usuarios visitan sitios que no figuran en el límite de red aislada, los sitios se abren en una sesión de exploración virtual en Hyper-V. Los sitios de confianza se definen mediante un límite de red, que puede establecerse en Configuración del dispositivo. Tenga en cuenta que esta característica solo está disponible para dispositivos que ejecutan Windows 10 de 64 bits o versiones posteriores.",
+ "windows10EndpointProtectionCredentialGuard": "Al habilitar Credential Guard, se habilitan los valores obligatorios siguientes:\r\n \r\n
\r\n
Enable virtualization-based security: activa la seguridad basada en la virtualización (VBS) la próxima vez que se reinicie. Este tipo de seguridad usa el hipervisor de Windows para proporcionar compatibilidad con los servicios de seguridad.
\r\n \r\n
Secure Boot with Direct Memory Access: activa VBS con arranque seguro y acceso directo a memoria (DMA).
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Elija aplicaciones adicionales que deban auditarse o con confianza para ejecutarse mediante el Control de aplicaciones de Microsoft Defender. Se confía automáticamente en la ejecución de los componentes de Windows y de todas las aplicaciones de Microsoft Store.
\r\n Las aplicaciones no se bloquearán al ejecutarse en modo “Solo auditoría”. Este modo registra todos los eventos en los registros de cliente locales.\r\n ",
+ "windows10GeneralPrivacyPerApp": "Agregue las aplicaciones que deben tener un comportamiento de privacidad diferente al establecido en “Privacidad predeterminada”.",
+ "windows10NetworkBoundaryNetworkBoundary": "El límite de red es una lista de los recursos de empresa, como los intervalos de direcciones IP y dominios hospedados en la nube de los equipos que se incluyen en la red empresarial. Defina límites de red a fin de aplicar directivas para proteger los datos que residen en estas ubicaciones.",
+ "windowsHealthMonitoring": "Configure la directiva de seguimiento de estado de Windows.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone puede bloquear la instalación o el inicio de aplicaciones incluidas en la lista de aplicaciones prohibidas o no especificadas en la lista de aplicaciones aprobadas a los usuarios. Todas las aplicaciones administradas deben agregarse a la lista aprobada."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Sólo fallan las aplicaciones de bloqueo seleccionadas en la fase de técnico",
+ "apps": "aplicaciones",
+ "appsListName": "Lista de aplicaciones",
+ "blockingApps": "Bloqueando aplicaciones",
+ "managedApps": "Aplicaciones administradas",
+ "noApps": "No hay aplicaciones.",
+ "noAppsError": "Error al recuperar las aplicaciones.",
+ "selectApps": "Seleccionar aplicaciones",
+ "selectedAppsCount": "{0} aplicaciones seleccionadas (máx. 100)",
+ "useSelectedAppsAll": "Todos",
+ "useSelectedAppsSelected": "Seleccionado",
+ "useSelectedAppsToggleLabel": "Bloquear el uso del dispositivo hasta que se instalen las aplicaciones necesarias si están asignadas al usuario/dispositivo"
+ },
+ "Header": {
+ "application": "Aplicación",
+ "publisher": "Anunciante",
+ "version": "Versión"
+ },
+ "SearchBox": {
+ "ariaLabel": "Buscar aplicaciones",
+ "placeHolder": "Buscar por nombre o editor"
+ },
+ "allowToUseToggle": "Permitir a los usuarios utilizar el dispositivo si se produce un error de instalación",
+ "blockToggle": "Bloquear el uso del dispositivo hasta que todos los perfiles y aplicaciones estén instalados",
+ "blockToolTip": "Si agrega Microsoft Word a esta lista, por ejemplo, los usuarios y los dispositivos de destino no podrán salir de la página de estado de la inscripción hasta que Word se instale correctamente.",
+ "collectLogToggle": "Activar la recopilación de registros y la página de diagnóstico para los usuarios finales",
+ "create": "Crear perfil",
+ "customMessageTextBox": "Mensaje de error",
+ "customMessageToggle": "Mostrar un mensaje personalizado cuando se produce un límite de tiempo o un error",
+ "enableForAutopilotOnlyToggle": "Mostrar solo la página en los dispositivos aprovisionados por la configuración rápida (OOBE)",
+ "installQualityUpdatesToggle": "Instalar actualizaciones de calidad de Windows (podría reiniciar el dispositivo) (versión preliminar)",
+ "progressToggle": "Mostrar el progreso de la configuración de la aplicación y el perfil",
+ "resetToggle": "Permitir a los usuarios restablecer el dispositivo si se produce un error de instalación",
+ "timeout": "Mostrar un error cuando el tiempo de instalación supera el número de minutos especificado"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Propiedad",
+ "rule": "Regla",
+ "ruleDetails": "Detalles de la regla",
+ "value": "Valor"
+ },
+ "assignIf": "Asignar perfil si",
+ "deleteWarning": "Esta acción eliminará la regla de aplicabilidad seleccionada",
+ "dontAssignIf": "No asignar perfil si",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "y {0} más",
+ "instructions": "Especifique cómo aplicar este perfil en un grupo asignado. Intune solo aplicará el perfil a los dispositivos que cumplan los criterios combinados de estas reglas.",
+ "maxText": "Máx.",
+ "minText": "Mín.",
+ "noActionRow": "No hay reglas de aplicabilidad especificadas",
+ "oSVersion": "Por ejemplo, 1.2.3.4",
+ "toText": "hasta el",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home en un solo idioma",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "Edición del sistema operativo",
+ "windows10OsVersion": "Versión del SO",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Permitir que el usuario cambie la configuración",
+ "tooltip": "Especifique si el usuario tiene permiso para cambiar la configuración."
+ },
+ "AllowWorkAccounts": {
+ "title": "Permitir solo cuentas profesionales o educativas",
+ "tooltip": " Si se habilita esta opción, los usuarios no pueden agregar cuentas de almacenamiento y de correo electrónico personales a Outlook. Si un usuario tiene una cuenta personal agregada a Outlook, se le pide que la quite y, si no la quita, no se puede agregar la cuenta profesional o educativa."
+ },
+ "BlockExternalImages": {
+ "title": "Bloquear imágenes externas",
+ "tooltip": "Cuando el bloqueo de imágenes externas está habilitado, la aplicación impide la descarga de imágenes hospedadas en Internet que están insertadas en el cuerpo del mensaje. Si se establece como no configurado, la aplicación establece el valor Desactivado de forma predeterminada."
+ },
+ "ConfigureEmail": {
+ "title": "Configurar cuentas de correo electrónico"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "La firma de aplicación predeterminada indica si la aplicación usará \"Obtener Outlook para Android\" como firma predeterminada durante la composición del mensaje. Si la configuración está desactivada, no se usará la firma predeterminada. Sin embargo, los usuarios pueden agregar su propia firma.\r\n\r\nCuando se establece como Sin configurar, la configuración de aplicación predeterminada se establece en Activado.",
+ "iOS": "La firma de aplicación predeterminada indica si la aplicación usará \"Obtener Outlook para iOS\" como firma predeterminada durante la composición del mensaje. Si la configuración está desactivada, no se usará la firma predeterminada. Sin embargo, los usuarios pueden agregar su propia firma.\r\n\r\nCuando se establece como Sin configurar, la configuración de aplicación predeterminada se establece en Activado."
+ },
+ "title": "Firma de aplicación predeterminada"
+ },
+ "OfficeFeedReplies": {
+ "title": "Fuente de detección",
+ "tooltip": "Fuente de detección destaca los archivos de Office a los que accede con más frecuencia. Esta fuente se habilita de forma predeterminada si Delve está habilitado para el usuario. Si está sin configurar, la configuración de la aplicación predeterminada se establece como Activa."
+ },
+ "OrganizeMailByThread": {
+ "title": "Organizar el correo por hilos",
+ "tooltip": "El comportamiento predeterminado de Outlook es agrupar las conversaciones de correo electrónico en una vista de conversaciones por hilos. Si esta opción está deshabilitada, Outlook muestra cada correo electrónico por separado, sin agrupar los mensajes por hilos."
+ },
+ "PlayMyEmails": {
+ "title": "Reproducir mis correos electrónicos",
+ "tooltip": "La característica Reproducir mis correos electrónicos no está habilitada de forma predeterminada en la aplicación, pero se promueve a los usuarios aptos mediante un banner en la bandeja de entrada. Si se establece en Desactivada, no se promociona a los usuarios aptos en la aplicación. Los usuarios pueden optar por habilitar manualmente Reproducir mis correos electrónicos desde la propia aplicación, aunque la característica esté establecida como Desactivada. Si se establece como Sin configurar, la configuración predeterminada de la aplicación es Activada y la característica se promoverá a los usuarios aptos."
+ },
+ "SuggestedReplies": {
+ "title": "Respuestas sugeridas",
+ "tooltip": "Al abrir un mensaje, Outlook puede sugerir respuestas debajo de este. Si selecciona una de las respuestas sugeridas, puede editarla antes de enviarla."
+ },
+ "SyncCalendars": {
+ "title": "Sincronizar calendarios",
+ "tooltip": "Configure si los usuarios pueden sincronizar su calendario de Outlook con la base de datos y la aplicación de calendario nativo."
+ },
+ "TextPredictions": {
+ "title": "Predicciones de texto",
+ "tooltip": "Outlook puede sugerir palabras y frases al redactar mensajes. Cuando Outlook ofrezca una sugerencia, deslice rápidamente el dedo para aceptarla. Cuando se define como no configurada, la configuración de la aplicación predeterminada se establece en Activada."
+ },
+ "ThemesEnabled": {
+ "title": "Temas habilitados",
+ "tooltip": "Especifique si el usuario puede usar un tema visual personalizado."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "Dispositivos ChromeOS"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Contactos del administrador",
+ "appPackaging": "Empaquetado de aplicaciones",
+ "autopatchGroups": "Grupos de Autopatch",
+ "devices": "Dispositivos",
+ "featureEnablement": "Activar característica",
+ "feedback": "Comentarios",
+ "gettingStarted": "Introducción",
+ "messages": "Mensajes",
+ "onlineResources": "Recursos en línea",
+ "policyHealth": "Directivas de mantenimiento",
+ "policyHealthPreview": "Estado de la directiva (versión preliminar)",
+ "releaseManagement": "Administración de versiones",
+ "serviceRequests": "Solicitudes de servicio",
+ "settings": "Configuración",
+ "supportRequests": "Solicitudes de soporte técnico",
+ "tenantEnrollment": "Inscripción de inquilinos",
+ "tenantManagement": "Administración de espacios empresariales"
+ },
+ "actions": "Acciones en caso de incumplimiento",
+ "advancedExchangeSettings": "Configuración de Exchange Online",
+ "advancedThreatProtection": "Microsoft Defender for Endpoint",
+ "allApps": "Todas las aplicaciones",
+ "allDevices": "Todos los dispositivos",
+ "androidFotaDeployments": "Implementaciones de Android FOTA",
+ "appBundles": "Lotes de aplicaciones",
+ "appCategories": "Categorías de aplicaciones",
+ "appConfigPolicies": "Directivas de configuración de aplicaciones",
+ "appConfigurationStatus": "Estado de App Configuration",
+ "appInstallStatus": "Estado de instalación de la aplicación",
+ "appLicences": "Licencias de aplicación",
+ "appProtectionPolicies": "Directivas de protección de aplicaciones",
+ "appProtectionStatus": "Estado de protección de la aplicación",
+ "appSelectiveWipe": "Borrado selectivo de aplicaciones",
+ "appleVppTokens": "Tokens de VPP de Apple",
+ "apps": "Aplicaciones",
+ "assign": "Asignaciones",
+ "assignedPermissions": "Permisos asignados",
+ "assignedRoles": "Roles asignados",
+ "autopilotDeploymentReport": "Implementaciones de Autopilot (versión preliminar)",
+ "autopilotDeploymentReportV2": "Implementación del Autopilot 2.0 (versión preliminar)",
+ "brandingAndCustomization": "Personalización",
+ "cartProfiles": "Perfiles de carro",
+ "certificateConnectors": "Conectores de certificados",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Dispositivos conectados a la nube (vista previa)",
+ "cloudPcActions": "Acciones de CLOUD PC (versión preliminar)",
+ "cloudPcMaintenanceWindows": "Ventanas de mantenimiento de PC en la nube (versión preliminar)",
+ "compliancePolicies": "Directivas de cumplimiento",
+ "complianceScriptManagement": "Scripts",
+ "complianceScriptManagementPreview": "Scripts (vista previa)",
+ "complianceSettings": "Configuración de directivas de cumplimiento",
+ "conditionStatements": "Instrucciones de condición",
+ "conditions": "Ubicaciones",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Perfiles de configuración",
+ "configurationScripts": "Scripts de configuración",
+ "connectorsAndTokens": "Conectores y tokens",
+ "corporateDeviceIdentifiers": "Identificadores de dispositivo corporativos",
+ "customAttributes": "Atributos personalizados",
+ "customAttributesMacOS": "Atributos personalizados para macOS",
+ "customNotifications": "Notificaciones personalizadas",
+ "deploymentSettings": "Configuración de la implementación",
+ "derivedCredentials": "Credenciales derivadas",
+ "deviceActions": "Acciones de dispositivo",
+ "deviceCategories": "Categorías de dispositivo",
+ "deviceCleanUp": "Reglas de limpieza de dispositivos",
+ "deviceEnrollmentManagers": "Administradores de inscripción de dispositivos",
+ "deviceExecutionStatus": "Estado del dispositivo",
+ "deviceLimitEnrollmentRestrictions": "Restricciones de límite de dispositivos inscritos",
+ "deviceTypeEnrollmentRestrictions": "Restricciones de la plataforma de dispositivos inscritos",
+ "devices": "Dispositivos",
+ "discoveredApps": "Aplicaciones detectadas",
+ "edgePolicies": "Directivas para Microsoft Edge",
+ "embeddedSIM": "Perfiles de telefonía móvil eSIM (versión preliminar)",
+ "enrollDevices": "Inscribir dispositivos",
+ "enrollmentFailures": "Errores de inscripción",
+ "enrollmentNotifications": "Notificaciones de inscripción (vista previa)",
+ "enrollmentRestrictions": "Restricciones de inscripción",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Conectores de servicio de Exchange",
+ "failuresForCumulativeQualityUpdates": "Errores en la actualización acumulativa de calidad de Windows",
+ "failuresForDriverUpdates": "Errores de actualización de controladores de Windows",
+ "failuresForFeatureUpdates": "Errores de actualización de características",
+ "failuresForQualityUpdates": "Errores en la actualización urgente de Windows",
+ "featureFlighting": "Alternancia de características",
+ "featureUpdateDeployments": "Actualizaciones de características para Windows 10 y versiones posteriores",
+ "flighting": "Distribución de paquetes piloto",
+ "fotaUpdate": "Actualización de firmware por vía inalámbrica",
+ "groupPolicy": "Plantillas administrativas",
+ "groupPolicyAnalytics": "Análisis de directiva de grupo",
+ "helpSupport": "Ayuda y soporte técnico",
+ "helpSupportReplacement": "Ayuda y soporte técnico ({0})",
+ "iOSAppProvisioning": "Perfiles de aprovisionamiento de aplicaciones de iOS",
+ "incompleteUserEnrollments": "Inscripciones de usuario incompletas",
+ "iosUpdates": "Actualizaciones de iOS/iPadOS",
+ "legacyPcManagement": "Administración de equipos heredados",
+ "macOSSoftwareUpdate": "Actualizaciones de macOS",
+ "macOSSoftwareUpdateAccountSummaries": "Estado de instalación de los dispositivos macOS",
+ "macOSSoftwareUpdateCategorySummaries": "Resumen de actualizaciones de software",
+ "macOSSoftwareUpdateStateSummaries": "actualizaciones",
+ "managedGooglePlay": "Google Play administrado",
+ "msfb": "Tienda Microsoft para Empresas",
+ "myPermissions": "Mis permisos",
+ "notifications": "Notificaciones",
+ "officeApps": "Aplicaciones de Office",
+ "officeProPlusPolicies": "Directivas para las aplicaciones de Office",
+ "onPremise": "Local",
+ "onPremisesConnector": "Exchange ActiveSync Connector local",
+ "onPremisesDeviceAccess": "Dispositivos de Exchange ActiveSync",
+ "onPremisesManageAccess": "Acceso a Exchange local",
+ "outOfDateIosDevices": "Errores de instalación para dispositivos iOS",
+ "overview": "Información general",
+ "partnerDeviceManagement": "Administración de dispositivos de socio",
+ "perUpdateRingDeploymentState": "Estado de implementación por anillo de actualización",
+ "permissions": "Permisos",
+ "platformApps": "{0} aplicaciones",
+ "platformDevices": "{0} dispositivos",
+ "platformEnrollment": "Inscripción de {0}",
+ "policies": "Directivas",
+ "profiles": "Perfiles",
+ "properties": "Propiedades",
+ "reports": "Informes",
+ "retireNoncompliantDevices": "Retirar dispositivos no conformes",
+ "retireNoncompliantDevicesPreview": "Retirar dispositivos no conformes (versión preliminar)",
+ "role": "Rol",
+ "scriptManagement": "Scripts",
+ "securityBaselines": "Líneas base de seguridad",
+ "serviceToServiceConnector": "Conector de Exchange Online",
+ "servicenowConnector": "Conector de ServiceNow",
+ "shellScripts": "Scripts de Shell",
+ "teamViewerConnector": "Conector de TeamViewer",
+ "telecomeExpenseManagement": "Administración de gastos de telecomunicaciones",
+ "tenantAdmin": "Administrador de inquilinos",
+ "tenantAdministration": "Administración de inquilinos",
+ "termsAndConditions": "Términos y condiciones",
+ "titles": "Títulos",
+ "troubleshoot": "Solucionar problemas",
+ "troubleshootSupport": "Solución de problemas + soporte técnico",
+ "user": "Usuario",
+ "userExecutionStatus": "Estado del usuario",
+ "wdacSupplementalPolicies": "Directivas complementarias del modo S",
+ "win32CatalogUpdateApp": "Actualizaciones para aplicaciones de administración de aplicaciones empresariales",
+ "win32CatalogUpdateAppInPreview": "Actualizaciones para aplicaciones de catálogo de Windows (Win32) (versión preliminar)",
+ "win32CatalogUpdateAppPreviewTitle": "Aplicaciones del catálogo de aplicaciones empresariales con actualizaciones (versión preliminar)",
+ "win32CatalogUpdateAppTitle": "Aplicaciones del catálogo de aplicaciones empresariales con actualizaciones",
+ "windows10DriverUpdate": "Actualizaciones de controladores para Windows 10 y versiones posteriores",
+ "windows10QualityUpdate": "Actualizaciones de calidad para Windows 10 y versiones posteriores",
+ "windows10UpdateRings": "Anillos de actualización para Windows 10 y versiones posteriores",
+ "windows10XPolicyFailures": "Errores de directiva de Windows 10X",
+ "windows365PartnerConnector": "Conectores de socios de Windows 365",
+ "windowsDiagnosticData": "Datos de Windows",
+ "windowsEnterpriseCertificate": "Certificado de Windows Enterprise",
+ "windowsManagement": "Scripts",
+ "windowsSideLoadingKeys": "Claves de instalación de prueba de Windows",
+ "windowsSymantecCertificate": "Certificado DigiCert de Windows",
+ "windowsThreatReport": "Estado del agente de amenazas"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Permitir a los usuarios abrir datos de los servicios seleccionados",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Seleccionar el número de valores de PIN anteriores que se van a mantener"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "Una acción de bloqueo es necesaria para todas las directivas de cumplimiento.",
- "graceperiod": "Programar (días después del no cumplimiento)",
- "graceperiodInfo": "Especificar el número de días sin cumplimiento transcurrido el cual debe desencadenarse esta acción para el dispositivo del usuario",
- "subtitle": "Especificar parámetros de acción",
- "title": "Parámetros de acción"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Poner a disposición de los usuarios como una actualización opcional",
+ "optionalValue": "Opcional",
+ "required": "Poner a disposición de los usuarios como una actualización necesaria",
+ "requiredValue": "Requerido"
},
- "List": {
- "gracePeriodDay": "{0} día después del no cumplimiento",
- "gracePeriodDays": "{0} días después del no cumplimiento",
- "gracePeriodHour": "{0} hora después del incumplimiento",
- "gracePeriodHours": "{0} horas después del incumplimiento",
- "gracePeriodMinute": "{0} minuto después del incumplimiento",
- "gracePeriodMinutes": "{0} minutos después del incumplimiento",
- "immediately": "Inmediatamente",
- "schedule": "Programar",
- "scheduleInfoBalloon": "Días después del incumplimiento",
- "subtitle": "Especificar la secuencia de acciones en los dispositivos no conformes",
- "title": "Acciones"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Aplicación del sistema Android Enterprise",
+ "androidForWorkApp": "Aplicación de Google Play Store administrado",
+ "androidLobApp": "Aplicación de línea de negocio Android",
+ "androidStoreApp": "Aplicación de la tienda Android",
+ "builtInAndroid": "Aplicación Android integrada",
+ "builtInApp": "Aplicación integrada",
+ "builtInIos": "Aplicación iOS integrada",
+ "default": "",
+ "iosIPadOSWebClip": "Clip web de iOS/iPadOS",
+ "iosLobApp": "Aplicación de línea de negocio iOS",
+ "iosStoreApp": "Aplicación de la tienda iOS",
+ "iosVppApp": "Aplicación del Programa de Compras por Volumen iOS",
+ "lineOfBusinessApp": "Aplicación de línea de negocio",
+ "macOSDmgApp": "Aplicación macOS (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Aplicación de línea de negocio de macOS",
+ "macOSMicrosoftDefenderApp": "ATP de Microsoft Defender (macOS)",
+ "macOSOfficeSuiteApp": "Aplicaciones de Microsoft 365 (macOS)",
+ "macOSPkgApp": "Aplicación macOS (PKG)",
+ "macOSWebClip": "Clip web de macOS",
+ "macOsVppApp": "Aplicación del Programa de Compras por Volumen de macOS",
+ "managedAndroidLobApp": "Aplicación de línea de negocio Android administrada",
+ "managedAndroidStoreApp": "Aplicación de la tienda Android administrada",
+ "managedGooglePlayApp": "Aplicación de Google Play Store administrado",
+ "managedGooglePlayPrivateApp": "Aplicación privada de Google Play administrado",
+ "managedGooglePlayWebApp": "Vínculo web de Google Play administrado",
+ "managedIosLobApp": "Aplicación de línea de negocio iOS administrada",
+ "managedIosStoreApp": "Aplicación de la tienda iOS administrada",
+ "microsoftStoreForBusinessApp": "Aplicación de la Tienda Microsoft para Empresas",
+ "microsoftStoreForBusinessReleaseManagedApp": "Tienda Microsoft para Empresas",
+ "officeSuiteApp": "Aplicaciones de Microsoft 365 (Windows 10 y versiones posteriores)",
+ "webApp": "Vínculo web",
+ "windowsAppXLobApp": "Aplicación de línea de negocio de AppX para Windows",
+ "windowsClassicApp": "Aplicación de Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 y versiones posteriores)",
+ "windowsMobileMsiLobApp": "Aplicación de línea de negocio de MSI para Windows",
+ "windowsPhone81AppXBundleLobApp": "Aplicación de línea de negocio AppX para Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "Aplicación de línea de negocio AppX para Windows Phone 8.1",
+ "windowsPhone81StoreApp": "Aplicación de la Tienda Windows Phone 8.1",
+ "windowsPhoneXapLobApp": "Aplicación de línea de negocio de XAP para Windows Phone",
+ "windowsStoreApp": "Aplicación de Microsoft Store (heredada)",
+ "windowsUniversalAppXLobApp": "Aplicación de línea de negocio de AppX para Windows Universal",
+ "windowsUniversalLobApp": "Aplicación de línea de negocio Windows universal",
+ "windowsWebApp": "Vínculo web de Windows"
+ },
+ "PolicySet": {
+ "appManagement": "Administración de aplicaciones",
+ "assignments": "Asignaciones",
+ "basics": "Básico",
+ "deviceEnrollment": "Inscripción de dispositivos",
+ "deviceManagement": "Administración de dispositivos",
+ "scopeTags": "Etiquetas de ámbito",
+ "appConfigurationTitle": "Directivas de configuración de aplicaciones",
+ "appProtectionTitle": "Directivas de protección de aplicaciones",
+ "appTitle": "Aplicaciones",
+ "iOSAppProvisioningTitle": "Perfiles de aprovisionamiento de aplicaciones de iOS",
+ "deviceLimitRestrictionTitle": "Restricciones de límite de dispositivos",
+ "deviceTypeRestrictionTitle": "Restricciones de tipo de dispositivo",
+ "enrollmentStatusSettingTitle": "Páginas de estado de la inscripción",
+ "windowsAutopilotDeploymentProfileTitle": "Perfiles de Windows Autopilot Deployment",
+ "deviceComplianceTitle": "Directivas de cumplimiento de dispositivos",
+ "deviceConfigurationTitle": "Perfiles de configuración de dispositivos",
+ "powershellScriptTitle": "Scripts de PowerShell"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "La instalación de la aplicación puede forzar el reinicio del dispositivo",
+ "basedOnReturnCode": "Determinar comportamiento en función de códigos de retorno",
+ "force": "Intune forzará un reinicio obligatorio del dispositivo",
+ "suppress": "Ninguna acción específica"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Tiempo de instalación necesario (minutos)",
+ "maxRunTimeInMinutesToolTip": "Número de minutos que el sistema esperará a que finalice el programa de instalación. El valor predeterminado es 60 minutos."
+ },
+ "RunAsAccountOptions": {
+ "system": "Sistema",
+ "user": "Usuario"
+ },
+ "availableUninstall": "Permitir que la desinstalación esté disponible",
+ "availableUninstallTooltip": "Seleccione \"Sí\" para ofrecer la opción de desinstalación de esta aplicación a los usuarios desde el Portal de empresa. Seleccione \"No\" para impedir que los usuarios desinstalen la aplicación desde el Portal de empresa.",
+ "bladeTitle": "Programa",
+ "deviceRestartBehavior": "Comportamiento de reinicio de dispositivo",
+ "deviceRestartBehaviorTooltip": "Seleccione el comportamiento de reinicio del dispositivo después de que la aplicación se haya instalado correctamente. Seleccione \"Determinar comportamiento en función de códigos de retorno\" para reiniciar el dispositivo según los valores de configuración de los códigos de retorno. Seleccione \"Ninguna acción específica\" para suprimir los reinicios del dispositivo durante la instalación de aplicaciones basadas en MSI. Seleccione \"La instalación de la aplicación puede forzar el reinicio del dispositivo\" para permitir que se complete la instalación de la aplicación sin suprimir los reinicios. Seleccione \"Intune forzará un reinicio obligatorio del dispositivo\" para reiniciar siempre el dispositivo después de que la instalación de la aplicación se haya realizado correctamente.",
+ "header": "Especifique los comandos para instalar y desinstalar la aplicación:",
+ "installCommand": "Comando de instalación",
+ "installCommandMaxLengthErrorMessage": "El comando de instalación no puede superar la longitud máxima permitida de 1024 caracteres.",
+ "installCommandTooltip": "La línea de comandos de instalación completa que se usa para instalar la aplicación.",
+ "runAs32Bit": "Ejecutar comandos de instalación y desinstalación en un proceso de 32 bits en clientes de 64 bits",
+ "runAs32BitTooltip": "Seleccione \"Sí\" para instalar y desinstalar la aplicación en un proceso de 32 bits en clientes de 64 bits. Seleccione \"No\" (predeterminado) para instalarla y desinstalarla en un proceso de 64 bits en clientes de 64 bits. Los clientes de 32 bits siempre usan un proceso de 32 bits.",
+ "runAsAccount": "Comportamiento de instalación",
+ "runAsAccountTooltip": "Seleccione \"Sistema\" para instalar esta aplicación para todos los usuarios si se admite. Seleccione \"Usuario\" para instalar esta aplicación para el usuario que ha iniciado sesión en el dispositivo. En las aplicaciones MSI de doble propósito, los cambios evitarán que las actualizaciones y desinstalaciones finalicen correctamente hasta que se restaure el valor aplicado al dispositivo en el momento de la instalación original.",
+ "selectorLabel": "Programa",
+ "uninstallCommand": "Comando de desinstalación",
+ "uninstallCommandTooltip": "La línea de comandos de desinstalación completa que se usa para desinstalar la aplicación."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Otros",
- "additionalRecipients": "Destinatarios adicionales (por correo electrónico)",
- "additionalRecipientsBladeTitle": "Seleccionar destinatarios adicionales",
- "emailAddressPrompt": "Escriba direcciones de correo electrónico (separadas por comas)",
- "invalidEmail": "Dirección de correo electrónico no válida",
- "messageTemplate": "Plantilla de mensaje",
- "noneSelected": "No se ha seleccionado ninguno",
- "notSelected": "No seleccionada",
- "numSelected": "{0} seleccionados",
- "selected": "Seleccionado"
- },
- "block": "Marcar el dispositivo como no conforme",
- "lockDevice": "Bloquear dispositivo (acción local)",
- "lockDeviceWithPasscode": "Bloquear dispositivo (acción local)",
- "noAction": "No hay ninguna acción",
- "noActionRow": "No hay ninguna acción, seleccione 'Agregar' para agregar una acción",
- "pushNotification": "Enviar notificación push al usuario final",
- "remoteLock": "Bloquear de forma remota el dispositivo no conforme",
- "removeSourceAccessProfile": "Quitar perfil de acceso de origen",
- "retire": "Agregar dispositivo a la lista de retirada",
- "wipe": "Borrar",
- "emailNotification": "Enviar correo electrónico a usuario final"
- },
- "InstallIntent": {
- "available": "Disponible para dispositivos inscritos",
- "availableWithoutEnrollment": "Disponible con o sin inscripción",
- "required": "Requerido",
- "uninstall": "Desinstalar"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Crear un script personalizado",
- "edit": "Editar script personalizado"
- },
- "basicInfo": "Cree un paquete de scripts personalizado a partir de los scripts de detección y corrección que ha escrito.",
- "customScriptCapitalized": "Script personalizado",
- "customScriptLowercase": "script personalizado",
- "detectionScript": "Script de detección"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Permitir el uso de letras minúsculas en el PIN",
+ "notAllow": "No permitir el uso de letras minúsculas en el PIN",
+ "requireAtLeastOne": "Requerir el uso de al menos una letra minúscula en el PIN"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Permitir el uso de caracteres especiales en el PIN",
+ "notAllow": "No permitir el uso de caracteres especiales en el PIN",
+ "requireAtLeastOne": "Requerir el uso de al menos un carácter especial en el PIN"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Permitir el uso de letras mayúsculas en el PIN",
+ "notAllow": "No permitir el uso de letras mayúsculas en el PIN",
+ "requireAtLeastOne": "Requerir el uso de al menos una letra mayúscula en el PIN"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Crear nuevo",
+ "createNewResourceAccountInfo": "
\r\nCree una cuenta de recurso durante la inscripción. La cuenta del recurso se agregará a la tabla de cuentas de recursos inmediatamente, pero no estará activa hasta que el dispositivo se inscriba y se compruebe la suscripción de Surface Hub. Más información sobre las cuentas de recursos
\r\n ",
+ "createNewResourceTitle": "Crear cuenta de recurso",
+ "deviceNameInvalid": "El formato del nombre de dispositivo no es válido.",
+ "deviceNameRequired": "Se requiere el nombre de un dispositivo.",
+ "editResourceAccountLabel": "Editar",
+ "selectExistingCommandMenu": "Seleccionar existente"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "Los nombres deben tener un máximo de 15 caracteres y pueden contener letras (a-z, A-Z), números (0-9) y guiones. No deben contener solo números y no pueden incluir un espacio en blanco."
+ },
+ "Header": {
+ "addressableUserName": "Nombre descriptivo",
+ "azureADDevice": "Dispositivo Microsoft Entra asociado",
+ "batch": "Etiqueta de grupo",
+ "dateAssigned": "Fecha de asignación",
+ "deviceAccountPwd": "Contraseña de la cuenta de dispositivo",
+ "deviceAccountUpn": "Cuenta del dispositivo",
+ "deviceDisplayName": "Nombre de dispositivo",
+ "deviceFriendlyName": "Nombre descriptivo del dispositivo",
+ "deviceName": "Nombre de dispositivo",
+ "deviceUseType": "Tipo de uso del dispositivo",
+ "enrollmentState": "Estado de inscripción",
+ "intuneDevice": "Dispositivo de Intune asociado",
+ "lastContacted": "Último contacto",
+ "make": "Fabricante",
+ "model": "Modelo",
+ "profile": "Perfil asignado",
+ "profileStatus": "Estado del perfil",
+ "purchaseOrderId": "Pedido de compra",
+ "resourceAccount": "Cuenta de recurso",
+ "serialNumber": "Número de serie",
+ "userPrincipalName": "Usuario"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Se necesita un nombre descriptivo",
+ "pwdRequired": "Se requiere una contraseña",
+ "pwdValidFormat": "No se puede actualizar la contraseña. El valor proporcionado para la nueva contraseña no cumple los requisitos de longitud o complejidad del dominio.",
+ "upnRequired": "Se requiere una cuenta de dispositivo",
+ "upnValidFormat": "Los valores pueden contener letras (a-z, A-Z), números (0-9) y guiones. Los valores no pueden incluir un espacio en blanco."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Reunión y presentación",
+ "teamCollaboration": "Colaboración en grupo"
+ },
+ "Devices": {
+ "featureDescription": "Windows Autopilot le permite personalizar la experiencia de configuración rápida (OOBE) para sus usuarios.",
+ "importErrorStatus": "Algunos dispositivos no se importaron. Haga clic aquí para obtener más información.",
+ "importPendingStatus": "Importación en curso. Tiempo transcurrido: {0} min. Este proceso puede tardar hasta {1} min."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Microsoft Entra híbrido unido",
+ "activeDirectoryADLabel": "Unido a Microsoft Entra híbrido con Autopilot",
+ "azureAD": "Microsoft Entra unido",
+ "unknownType": "Tipo desconocido"
+ },
+ "Filter": {
+ "enrollmentState": "Estado",
+ "profile": "Estado del perfil"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "El nombre descriptivo de usuario no puede estar vacío."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Cree una plantilla de asignación de nombres para agregar nombres a los dispositivos durante la inscripción.",
+ "label": "Aplicar plantilla de nombre de dispositivo"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "En el caso de los perfiles de implementación de Autopilot de tipo unido Microsoft Entra híbrido, los dispositivos se nombran utilizando los parámetros especificados en la configuración de Domain Join."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MiEmpresa-%RAND:4%",
+ "label": "Escriba un nombre",
+ "noDisallowedChars": "El nombre solo puede contener caracteres alfanuméricos, guiones, %SERIAL% o %RAND:x%",
+ "serialLength": "No se pueden usar más de siete caracteres con %SERIAL%",
+ "validateLessThan15Chars": "El nombre debe tener un máximo de 15 caracteres.",
+ "validateNoSpaces": "Los nombres de equipo no pueden contener espacios",
+ "validateNotAllNumbers": "El nombre también debe contener letras o guiones",
+ "validateNotEmpty": "El nombre no puede estar vacío",
+ "validateOnlyOneMacro": "El nombre solo debe contener una de estas macros: %SERIAL% o %RAND:x%"
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Cree un nombre único para los dispositivos. Los nombres deben tener un máximo de 15 caracteres y pueden contener letras (a-z, A-Z), números (0-9) y guiones. No deben contener solo números. Los nombres no pueden incluir un espacio en blanco. Use la macro %SERIAL% para agregar un número de serie específico del hardware. Como alternativa, use la macro %RAND:x% para agregar una cadena aleatoria de números, donde x es igual al número de dígitos que se van a agregar."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Habilite la opción para presionar la tecla Windows 5 veces y ejecutar OOBE sin autenticación de usuario a fin de inscribir el dispositivo y aprovisionar todas las configuraciones y aplicaciones del contexto del sistema. Las relativas al contexto del usuario se proporcionarán cuando este inicie sesión.",
+ "label": "Permitir implementación aprovisionada previamente"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "El flujo de unión del Autopilot Microsoft Entra híbrido continuará aunque no establezca la conectividad del controlador de dominio durante el OOBE.",
+ "label": "Omitir comprobación de conectividad de AD"
+ },
+ "accountType": "Tipo de cuenta de usuario",
+ "accountTypeInfo": "Especifique si los usuarios son administradores o usuarios estándar en el dispositivo. Tenga en cuenta que esta configuración no se aplica a las cuentas de administrador global o administrador de empresa. Estas cuentas no pueden ser usuarios estándar porque tienen acceso a todas las funciones administrativas de Microsoft Entra ID.",
+ "configOOBEInfo": "
\r\nEstablezca la configuración rápida para los dispositivos Autopilot\r\n
",
+ "configureDevice": "Modo de implementación",
+ "configureDeviceHintForSurfaceHub2": "Autopilot solo admite el modo de implementación automática para Surface Hub 2. Este modo no asocia el usuario al dispositivo inscrito, por lo que no requiere credenciales de usuario.",
+ "configureDeviceHintForWindowsPC": "
\r\n El modo de implementación controla si un usuario debe proporcionar credenciales para aprovisionar el dispositivo.\r\n
\r\n
\r\n
\r\n Controlado por el usuario: los dispositivos se asocian al usuario que los inscribe y se requieren sus credenciales para el aprovisionamiento.\r\n
\r\n
\r\n Implementación automática (versión preliminar): los dispositivos no se asocian al usuario que los inscribe y no se requieren sus credenciales para el aprovisionamiento.\r\n
\r\n
",
+ "createSurfaceHub2Info": "Establezca la configuración de inscripción de Autopilot para los dispositivos Surface Hub 2. De forma predeterminada, Autopilot habilita la omisión de la autenticación del usuario durante la configuración rápida. Obtenga más información acerca de Windows Autopilot para Surface Hub 2.",
+ "createWindowsPCInfo": "\r\n
\r\nLas opciones siguientes se habilitan automáticamente para los dispositivos Autopilot en modo autoimplementable:\r\n
\r\n
\r\n
\r\n Omisión de la selección de uso para trabajo o casa\r\n
\r\n
\r\n Omisión de la configuración de OneDrive y el registro de OEM\r\n
\r\n
\r\n Omisión de la autenticación de usuario en OOBE\r\n
\r\n
",
+ "endUserDevice": "Controlado por el usuario",
+ "hideEscapeLink": "Ocultar opciones para cambiar la cuenta",
+ "hideEscapeLinkInfo": "Las opciones para cambiar de cuenta y empezar de nuevo con una cuenta diferente aparecen, respectivamente, durante la configuración inicial del dispositivo en la página de inicio de sesión de la empresa y en la página de error de dominio. Para ocultar estas opciones, debe configurar la marca de la empresa en Microsoft Entra ID (requiere Windows 10, 1809 o posterior, o Windows 11).",
+ "info": "Al configurar perfiles de AutoPilot, se define la configuración rápida que los usuarios ven al iniciar Windows por primera vez. ",
+ "language": "Idioma (región)",
+ "languageInfo": "Especifique el idioma y la región que se van a usar.",
+ "licenseAgreement": "Términos de licencia del software de Microsoft",
+ "licenseAgreementInfo": "Especifique si se va a mostrar el CLUF a los usuarios.",
+ "plugAndForgetDevice": "Implementación automática",
+ "privacySettingWarning": "El valor predeterminado para la recopilación de datos de diagnóstico ha cambiado para los dispositivos que ejecutan Windows 10, versión 1903 y posteriores, o Windows 11.",
+ "privacySettings": "Configuración de privacidad",
+ "privacySettingsInfo": "Especifique si se va a mostrar la configuración de privacidad a los usuarios.",
+ "showCortanaConfigurationPage": "Configuración de Cortana",
+ "showCortanaConfigurationPageInfo": "Al mostrarla, se habilita la presentación de la configuración de Cortana durante el inicio.",
+ "skipEULAWarning": "Información importante sobre cómo ocultar los términos de licencia",
+ "skipKeyboardSelection": "Configurar el teclado automáticamente",
+ "skipKeyboardSelectionInfo": "Si es true, la página de selección de teclado se omite en caso de haberse establecido el idioma.",
+ "subtitle": "Perfiles de AutoPilot",
+ "title": "Configuración rápida (OOBE)",
+ "useOSDefaultLanguage": "Predeterminado del sistema operativo",
+ "userSelect": "Selección de usuario"
},
+ "Sync": {
+ "lastRequestedLabel": "Última solicitud de sincronización",
+ "lastSuccessfulLabel": "Última sincronización correcta",
+ "syncInProgress": "La sincronización está en curso. Vuelva a comprobarlo en breve.",
+ "syncInitiated": "Sincronización de la configuración de AutoPilot iniciada.",
+ "syncSettingsTitle": "Sincronizar configuración de AutoPilot"
+ },
+ "Title": {
+ "devices": "Dispositivos Windows AutoPilot"
+ },
+ "Tooltips": {
+ "addressableUserName": "Nombre de saludo que se muestra durante la instalación del dispositivo.",
+ "azureADDevice": "Ir a los detalles del dispositivo asociado. N/D significa que no hay ningún dispositivo asociado.",
+ "batch": "Atributo de cadena que puede utilizarse para identificar un grupo de dispositivos. El campo de etiqueta de grupo de Intune se corresponde con el atributo OrderID de los dispositivos Microsoft Entra.",
+ "dateAssigned": "Marca de tiempo que indica cuándo se asignó el perfil al dispositivo.",
+ "deviceAccountPwd": "Contraseña de la cuenta de dispositivo para dispositivos Surface Hub. Si se especifica, rellene también la cuenta del dispositivo y el nombre descriptivo.",
+ "deviceAccountUpn": "Correo electrónico de la cuenta de dispositivo para dispositivos Surface Hub. Si se especifica, rellene también la contraseña de la cuenta del dispositivo y el nombre descriptivo.",
+ "deviceDisplayName": "Configure un nombre único para un dispositivo. Este nombre será ignorado en las implementaciones unidas a Microsoft Entra híbrido. El nombre del dispositivo sigue procediendo del perfil de unión a dominio para dispositivos híbridos Microsoft Entra.",
+ "deviceFriendlyName": "Nombre descriptivo del dispositivo para dispositivos Surface Hub. Si se especifica, rellene también la cuenta del dispositivo y la contraseña de la cuenta del dispositivo.",
+ "deviceName": "Nombre que aparece cuando alguien ha intentado detectar el dispositivo y conectarse a él.",
+ "deviceUseType": " La configuración del dispositivo se basa en las opciones seleccionadas. Siempre puede cambiar más adelante en las opciones de configuración.\r\n
\r\n
Para las reuniones y presentaciones, Windows Hello no se activa y los datos se eliminan después de cada sesión.\r\n
\r\n
Para la colaboración en grupo, Windows Hello se activa y los perfiles se guardan para un inicio de sesión rápido
\r\n
",
+ "enrollmentState": "Especifica si el dispositivo se ha inscrito.",
+ "intuneDevice": "Ir a los detalles del dispositivo asociado. N/D significa que no hay ningún dispositivo asociado.",
+ "lastContacted": "Marca de tiempo que indica cuándo se contactó con el dispositivo por última vez.",
+ "make": "Fabricante del dispositivo seleccionado.",
+ "model": "Modelo del dispositivo seleccionado.",
+ "profile": "Nombre del perfil asignado al dispositivo.",
+ "profileStatus": "Especifica si un perfil está asignado al dispositivo.",
+ "purchaseOrderId": "Identificador de pedido de compra",
+ "resourceAccount": "La identidad del dispositivo o el nombre principal de usuario (UPN).",
+ "serialNumber": "Número de serie del dispositivo seleccionado.",
+ "userPrincipalName": "Usuario para el relleno previo de la autenticación durante la instalación del dispositivo."
+ },
+ "allDevices": "Todos los dispositivos",
+ "allDevicesAlreadyAssignedError": "Ya hay un perfil de Autopilot asignado a Todos los dispositivos.",
+ "assignFailedDescription": "No se pudieron actualizar las asignaciones de {0}.",
+ "assignFailedTitle": "No se pudieron actualizar las asignaciones de perfil de AutoPilot.",
+ "assignSuccessDescription": "Las asignaciones de {0} se actualizaron correctamente.",
+ "assignSuccessTitle": "Las asignaciones de perfil de AutoPilot se actualizaron correctamente.",
+ "assignSufaceHub2ProfileNextStep": "Pasos siguientes para esta implementación",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Asignar este perfil a al menos un grupo de dispositivos",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Asignar una cuenta de recursos a cada dispositivo Surface Hub en el que implemente este perfil",
+ "assignedDevicesCount": "Dispositivos asignados",
+ "assignedDevicesResourceAccountDescription": "
Para implementar este perfil en un dispositivo, debe asignar una cuenta de recurso al dispositivo. Seleccione un dispositivo cada vez para asignarle una cuenta de recurso existente o crear una. Más información sobre las cuentas de recursos
",
+ "assignedDevicesResourceAccountStatusBarMessage": "En esta tabla solo se enumeran los dispositivos de Surface Hub 2 a los que se les ha asignado este perfil.",
+ "assigningDescription": "Actualizando las asignaciones de {0}.",
+ "assigningTitle": "Actualización de las asignaciones de perfil de AutoPilot",
+ "autoremediationContext": "Hemos detectado un cambio de hardware en este dispositivo. Estamos intentando registrar automáticamente el nuevo hardware. No tiene que hacer nada ahora, el estado se actualizará en la próxima sincronización con el resultado. Más información sobre cómo restablecer el perfil.",
+ "autoremediationTitle": "El dispositivo {0} tiene una corrección pendiente",
+ "cannotDeleteMessage": "Este perfil está asignado a grupos. Para poder eliminarlo, antes debe desasignarlo de todos los grupos.",
+ "cannotDeleteTitle": "No se puede eliminar {0}",
+ "createdDateTime": "Creada",
+ "deleteMessage": "Si elimina el perfil de AutoPilot, los dispositivos asignados a este se mostrarán Sin asignar.",
+ "deleteMessageWithPolicySet": "{0} se incluye en uno o más conjuntos de directivas. Si elimina {0}, ya no podrá asignarlo mediante dichos conjuntos.",
+ "deleteTitle": "¿Seguro que desea eliminar este perfil?",
+ "description": "Descripción",
+ "deviceType": "Tipo de dispositivo",
+ "deviceUse": "Uso del dispositivo",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot solo admite dispositivos unidos a Microsoft Entra para Surface Hub 2. Especifique cómo se unen los dispositivos a Active Directory (AD) en su organización.\r\n
\r\n
\r\n
\r\n Unido a Microsoft Entra: Solo en la nube sin Windows Server Active Directory local.\r\n
\r\n Especifique cómo se unen los dispositivos a Active Directory (AD) en su organización:\r\n
\r\n
\r\n
\r\n Microsoft Entra unido: Solo en la nube sin Windows Server Active Directory local\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Error al capturar el recuento de dispositivos asignados.",
+ "getAssignmentsError": "Error al capturar las asignaciones de perfiles de AutoPilot.",
+ "harvestDeviceId": "Convertir todos los dispositivos de destino a Autopilot",
+ "harvestDeviceIdDescription": "De forma predeterminada, este perfil solo puede aplicarse a los dispositivos Autopilot sincronizados desde el servicio Autopilot.",
+ "harvestDeviceIdInfo": "\r\n Seleccione Sí para registrar todos los dispositivos de destino en Autopilot, si aún no lo están. La próxima vez que los dispositivos registrados sigan el proceso de configuración rápida (OOBE) de Windows, se les aplicará el escenario de Autopilot asignado.\r\n \r\n Tenga en cuenta que algunos escenarios de Autopilot requieren una versión de compilación mínima específica de Windows. Asegúrese de que el dispositivo tiene la versión de compilación mínima necesaria para aplicar el escenario.\r\n \r\n Al eliminar este perfil, no se eliminarán los dispositivos afectados de Autopilot. Para eliminar un dispositivo de Autopilot, use la vista Dispositivos Windows Autopilot.\r\n ",
+ "harvestDeviceIdWarning": "Una vez convertidos, los dispositivos Autopilot solo pueden revertirse si se eliminan de la lista de dispositivos Autopilot.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Los perfiles de implementación de Windows AutoPilot permiten personalizar la configuración rápida para sus dispositivos.",
+ "invalidProfileNameMessage": "No se permite el carácter \"{0}\".",
+ "joinTypeLabel": "Únase a Microsoft Entra ID como",
+ "lastModifiedDateTime": "Última modificación:",
+ "manualRemediationContext": "Hemos detectado un cambio de hardware en este dispositivo. No recibirá automáticamente un perfil de Autopilot cuando se restablezca a menos que registre el dispositivo de nuevo. Más información sobre cómo restablecer el perfil.",
+ "manualRemediationTitle": "El dispositivo {0} requiere su atención",
+ "name": "Nombre",
+ "noAutopilotProfile": "No hay perfiles de AutoPilot.",
+ "notEnoughPermissionAssignedError": "No tiene suficientes permisos para asignar este perfil a uno o varios de los grupos seleccionados. Póngase en contacto con el administrador.",
+ "profile": "perfil",
+ "resourceAccountStatusBarMessage": "Se requiere una cuenta de recurso para cada dispositivo Surface Hub 2 en el que se implemente este perfil. Haga clic para obtener más información.",
+ "selectServices": "Seleccionar el servicio de directorio al que se unirán los dispositivos",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Modo de implementación",
+ "windowsPCCommandMenu": "PC Windows",
+ "directoryServiceLabel": "Únase a Microsoft Entra ID como"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Dispositivos administrados",
+ "devicesWithoutEnrollment": "Aplicaciones administradas"
+ },
+ "AppProtection": {
+ "allAppTypes": "Destinar a todos los tipos de aplicaciones",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Aplicaciones en el perfil de trabajo Android",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Aplicaciones en dispositivos dedicados Android Enterprise con modo compartido Microsoft Entra",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Aplicaciones en un proyecto de código abierto de Android asociado",
+ "appsOnAndroidOpenSourceProjectUserless": "Aplicaciones en un proyecto de código abierto de Android sin usuario",
+ "appsOnIntuneManagedDevices": "Aplicaciones en dispositivos administrados de Intune",
+ "appsOnUnmanagedDevices": "Aplicaciones en dispositivos no administrados",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "MAC",
+ "notAvailable": "No disponible",
+ "windows10PlatformLabel": "Windows 10 y versiones posteriores",
+ "withEnrollment": "Con inscripción",
+ "withoutEnrollment": "Sin inscripción"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Cliente para equipo de escritorio de Project Online",
+ "visioProRetail": "Visio Online Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "No se pudo eliminar {0}.",
+ "failureCa": "No se pudo eliminar {0} porque las directivas de CA hacen referencia a él",
+ "modifying": "Eliminando {0}",
+ "success": "{0} se eliminó correctamente"
+ },
+ "Notify": {
+ "failure": "No se pudo actualizar {0}",
+ "modifying": "Modificación de {0} en curso",
+ "success": "Actualizadas correctamente: {0}."
+ },
+ "menuLabel": "Contexto de autenticación"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Obtenga más información sobre cómo solicitar métodos de autenticación satisfechos por los proveedores de federación.",
+ "certificate": "Autenticación de certificado",
+ "infoBubble": "Especifique un método de autenticación necesario, que el proveedor de federación debe satisfacer, como ADFS.",
+ "multifactor": "Autenticación multifactor",
+ "require": "Requerir método de autenticación federada (versión preliminar)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "La directiva de la sesión de explorador persistente solo funciona correctamente cuando se selecciona la opción \"Todas las aplicaciones en la nube\". Actualice la selección de las aplicaciones en la nube."
+ },
+ "Option": {
+ "always": "Siempre persistente",
+ "help": "Una sesión de explorador persistente permite que los usuarios mantengan la sesión iniciada después de cerrar y volver a abrir la ventana del explorador. \n
\n
Esta configuración funciona correctamente cuando se selecciona la opción \"Todas las aplicaciones en nube\".
\n
No afecta a la duración de los tokens ni a la configuración de la frecuencia de inicio de sesión.
\n
Invalidará la directiva \"Show option to stay signed in\" de la personalización de marca de la empresa.
\n
La opción \"Nunca persistente\" invalidará las notificaciones de SSO persistentes pasadas desde los servicios de autenticación federada.
\n
La opción \"Nunca persistente\" impedirá el SSO en los dispositivos móviles para las aplicaciones y entre las aplicaciones y el explorador móvil del usuario.
\n",
+ "label": "Sesión del explorador persistente",
+ "never": "Nunca persistente"
+ },
+ "Warning": {
+ "allApps": "La sesión de explorador persistente solo funciona correctamente cuando se selecciona la opción \"Todas las aplicaciones en la nube\". Cambie la selección de las aplicaciones en la nube. Haga clic aquí para obtener más información."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Horas o días",
+ "value": "Frecuencia"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} días",
+ "singular": "1 día"
+ },
+ "Hour": {
+ "plural": "{0} horas",
+ "singular": "1 hora"
+ },
+ "daysOption": "Días",
+ "everytime": "Cada vez",
+ "help": "Período de tiempo antes de que se pida a un usuario que vuelva a iniciar sesión cuando intenta acceder a un recurso. El valor predeterminado es un período acumulado de 90 días, es decir, se pedirá que los usuarios vuelvan a autenticarse la primera vez que intenten acceder a un recurso después de haber estado inactivos en la máquina durante un período de 90 días o superior.",
+ "hoursOption": "Horas",
+ "label": "Frecuencia de inicio de sesión",
+ "placeholder": "Seleccionar unidades"
+ }
+ },
+ "mainOption": "Modificar la duración de la sesión",
+ "mainOptionHelp": "Configure la frecuencia con la que se pedirá confirmación a los usuarios y si se conservarán las sesiones del explorador. Es posible que las aplicaciones que no admiten los protocolos de autenticación moderna no cumplan estas directivas. En tal caso, póngase en contacto con el desarrollador de la aplicación."
+ },
+ "SingleSelectorActive": {
+ "failed": "No se pueden cargar estos datos.",
+ "reattempt": "Cargando datos. Reintento {0} de {1}."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Elegir roles de directorio"
+ },
+ "Excluded": {
+ "gridAria": "Lista de usuarios excluidos"
+ },
+ "Included": {
+ "gridAria": "Lista de usuarios incluidos"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Roles del directorio\" incluye al menos un rol personalizado.",
+ "customRoleSelected": "Se ha seleccionado al menos un rol personalizado.",
+ "failed": "Es necesario configurar \"{0}\".",
+ "roles": "Seleccione por lo menos un rol.",
+ "usersGroups": "Seleccione por lo menos un usuario o grupo."
+ },
+ "learnMore": "Controle el acceso en función de a quién se aplicará la directiva, como usuarios y grupos, identidades de carga de trabajo, roles de directorio o invitados externos."
+ },
+ "advancedTabText": "Avanzado",
+ "allCloudAppsErrorBox": "Se debe seleccionar \"Todas las aplicaciones en la nube\" si se ha seleccionado la concesión \"Requerir cambio de contraseña\".",
+ "allCloudAppsReauth": "Se debe seleccionar \"Todas las aplicaciones en la nube\" cuando se seleccionen el control de sesión \"Frecuencia de inicio de sesión (cada vez)\" y la condición \"Riesgo de inicio de sesión\"",
+ "allCloudOrSpecificApps": "El control de sesión \"Frecuencia de inicio de sesión cada vez\" requiere que se seleccionen \"todas las aplicaciones en la nube\" o aplicaciones admitidas específicamente.",
+ "allDayCheckboxLabel": "Todo el día",
+ "allDevicePlatforms": "Cualquier dispositivo",
+ "allGuestUserInfoContent": "Incluye invitados B2B de Microsoft Entra, pero no invitados de SharePoint B2B",
+ "allGuestUserLabel": "Todos los usuarios externos e invitados",
+ "allRiskLevelsOption": "Todos los niveles de riesgo",
+ "allTrustedLocationLabel": "Todas las ubicaciones de confianza",
+ "allUserGroupSetSelectorLabel": "Todos los usuarios y grupos",
+ "allUsersReauth": "El control de sesión \"Frecuencia de inicio de sesión cada vez\" requiere que se seleccione \"Todos los usuarios\"",
+ "allUsersString": "Todos los usuarios",
+ "and": "{0} Y {1} ",
+ "andWithGrouping": "({0}) Y {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Cualquier aplicación en la nube",
+ "appContextOptionInfoContent": "Etiqueta de autenticación solicitada",
+ "appContextOptionLabel": "Etiqueta de autenticación solicitada (versión preliminar)",
+ "appContextUriPlaceholder": "Ejemplo: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Es posible que las restricciones que exige la aplicación requieran opciones de configuración de administración adicionales dentro de las aplicaciones de nube. Las restricciones solo se aplicarán en sesiones nuevas.",
+ "appNotSetSeletorLabel": "0 aplicaciones en la nube seleccionadas",
+ "appReauthNotSupported": "Esta aplicación no admite el control de sesión \"Frecuencia de inicio de sesión cada vez\".",
+ "applyConditionClientAppInfoBalloonContent": "Configurar aplicaciones cliente para aplicar la directiva a aplicaciones cliente específicas",
+ "applyConditionDevicePlatformInfoBalloonContent": "Configurar plataformas de dispositivo para aplicar la directiva a plataformas específicas",
+ "applyConditionDeviceStateInfoBalloonContent": "Configurar estado del dispositivo para aplicar la directiva a estados de dispositivo concretos",
+ "applyConditionLocationInfoBalloonContent": "Configurar ubicaciones para aplicar la directiva a ubicaciones de confianza o que no son de confianza",
+ "applyConditionSigninRiskInfoBalloonContent": "Configurar riesgo de inicio de sesión para aplicar la directiva a los niveles de riesgo seleccionados",
+ "applyConditionUserRiskInfoBalloonContent": "Configurar el riesgo de usuario para aplicar la directiva a los niveles de riesgo seleccionados",
+ "applyConditonLabel": "Configurar",
+ "ariaLabelPolicyDisabled": "La directiva está deshabilitada",
+ "ariaLabelPolicyEnabled": "La directiva está habilitada.",
+ "ariaLabelPolicyReportOnly": "La directiva está en modo de solo informe.",
+ "blockAccess": "Bloquear acceso",
+ "builtInDirectoryRoleLabel": "Roles del directorio integrados",
+ "casCustomControlInfo": "Las directivas personalizadas deben configurarse en el portal de Cloud App Security. Este control funciona de forma instantánea para las aplicaciones destacadas y puede incorporarse automáticamente en cualquier aplicación. Haga clic aquí para obtener más información sobre ambos casos.",
+ "casInfoBubble": "Este control funciona para diversas aplicaciones en la nube.",
+ "casPreconfiguredControlInfo": "Este control funciona de forma instantánea para las aplicaciones destacadas y puede incorporarse automáticamente en cualquier aplicación. Haga clic aquí para obtener más información sobre ambos casos.",
+ "cert64DownloadCol": "Descargar certificado Base 64",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Descargar certificado",
+ "certDurationCol": "Expiración",
+ "certDurationStartCol": "Válido desde",
+ "certName": "VpnCert",
+ "certainApps": "Solo se admiten determinadas aplicaciones para la “Frecuencia de inicio de sesión (cada vez)” si no se seleccionan las concesiones “Requerir autenticación multifactor” y “Requerir cambio de contraseña”",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Elegir aplicaciones",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Aplicaciones elegidas",
+ "chooseApplicationsEmpty": "No hay aplicaciones",
+ "chooseApplicationsNone": "Ninguno",
+ "chooseApplicationsNoneFound": "No encontramos \"{0}\". Pruebe con otro nombre o id.",
+ "chooseApplicationsPlural": "{0} y {1} más",
+ "chooseApplicationsReAuthEverytimeInfo": "¿Busca su aplicación? Algunas aplicaciones no se pueden usar con el control de sesión \"Requerir reautenticación cada vez\"",
+ "chooseApplicationsRemove": "Quitar",
+ "chooseApplicationsReturnedPlural": "Se encontraron {0} aplicaciones.",
+ "chooseApplicationsReturnedSingular": "Se encontró 1 aplicación.",
+ "chooseApplicationsSearchBalloon": "Escriba el nombre o el id. de una aplicación para buscarla.",
+ "chooseApplicationsSearchHint": "Buscar aplicaciones...",
+ "chooseApplicationsSearchLabel": "Aplicaciones",
+ "chooseApplicationsSearching": "Buscando...",
+ "chooseApplicationsSelect": "Seleccionar",
+ "chooseApplicationsSelected": "Seleccionados",
+ "chooseApplicationsSingular": "{0} y 1 más",
+ "chooseApplicationsTooMany": "Se pueden mostrar más resultados. Filtre con el cuadro de búsqueda.",
+ "chooseLocationCorpnetItem": "Red corporativa",
+ "chooseLocationSelectedLocationsLabel": "Ubicaciones seleccionadas",
+ "chooseLocationTrustedIpsItem": "Direcciones IP de confianza de la autenticación multifactor",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Elegir ubicaciones",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Ubicaciones elegidas",
+ "chooseLocationsEmpty": "No hay ubicaciones",
+ "chooseLocationsExcludedSelectorTitle": "Seleccionar",
+ "chooseLocationsIncludedSelectorTitle": "Seleccionar",
+ "chooseLocationsNone": "Ninguno",
+ "chooseLocationsNoneFound": "No encontramos \"{0}\". Pruebe con otro nombre o id.",
+ "chooseLocationsPlural": "{0} y {1} más",
+ "chooseLocationsRemove": "Quitar",
+ "chooseLocationsReturnedPlural": "{0} ubicaciones encontradas",
+ "chooseLocationsReturnedSingular": "1 ubicación encontrada",
+ "chooseLocationsSearchBalloon": "Escriba el nombre de una ubicación para buscarla.",
+ "chooseLocationsSearchHint": "Buscar ubicaciones...",
+ "chooseLocationsSearchLabel": "Ubicaciones",
+ "chooseLocationsSearching": "Buscando...",
+ "chooseLocationsSelect": "Seleccionar",
+ "chooseLocationsSelected": "Seleccionado",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Seleccionar",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Seleccionar",
+ "chooseLocationsSingular": "{0} y 1 más",
+ "chooseLocationsTooMany": "Se pueden mostrar más resultados. Filtre con el cuadro de búsqueda.",
+ "claimProviderAddCommandText": "Nuevo control personalizado",
+ "claimProviderAddNewBladeTitle": "Nuevo control personalizado",
+ "claimProviderDeleteCommand": "Eliminar",
+ "claimProviderDeleteDescription": "¿Está seguro de que quiere eliminar '{0}'? Esta acción no se puede deshacer.",
+ "claimProviderDeleteTitle": "¿Está seguro?",
+ "claimProviderEditInfoText": "Escriba el archivo JSON de los controles personalizados que especificaron los proveedores de notificaciones.",
+ "claimProviderNotificationCreateDescription": "Creando control personalizado con el nombre \"{0}\"",
+ "claimProviderNotificationCreateFailedDescription": "Error al crear el control personalizado \"{0}\". Vuelva a intentarlo más tarde.",
+ "claimProviderNotificationCreateFailedTitle": "No se pudo crear el control personalizado",
+ "claimProviderNotificationCreateSuccessDescription": "Se creó el control personalizado con el nombre \"{0}\".",
+ "claimProviderNotificationCreateSuccessTitle": "Se creó {0}.",
+ "claimProviderNotificationCreateTitle": "Creando {0}",
+ "claimProviderNotificationDeleteDescription": "Eliminando el control personalizado con el nombre \"{0}\"",
+ "claimProviderNotificationDeleteFailedDescription": "Error al eliminar el control personalizado \"{0}\". Vuelva a intentarlo más tarde.",
+ "claimProviderNotificationDeleteFailedTitle": "No se pudo eliminar el control personalizado",
+ "claimProviderNotificationDeleteSuccessDescription": "Se eliminó el control personalizado con el nombre \"{0}\".",
+ "claimProviderNotificationDeleteSuccessTitle": "Se eliminó '{0}'.",
+ "claimProviderNotificationDeleteTitle": "Eliminando '{0}'",
+ "claimProviderNotificationUpdateDescription": "Actualizando el control personalizado con el nombre \"{0}\"",
+ "claimProviderNotificationUpdateFailedDescription": "Error al actualizar el control personalizado con el nombre \"{0}\". Vuelva a intentarlo más tarde.",
+ "claimProviderNotificationUpdateFailedTitle": "No se pudo actualizar el control personalizado",
+ "claimProviderNotificationUpdateSuccessDescription": "Se actualizó el control personalizado con el nombre \"{0}\".",
+ "claimProviderNotificationUpdateSuccessTitle": "Se actualizó {0}.",
+ "claimProviderNotificationUpdateTitle": "Actualizando '{0}'",
+ "claimProviderValidationAppIdInvalid": "El valor \"AppId\" no es válido. Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationClientIdMissing": "Falta un valor \"ClientId\" en los datos. Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationControlClaimsRequestedMissing": "Falta un valor \"ClaimsRequested\" en \"Control\". Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "Falta un valor \"Type\" en el elemento \"ClaimsRequested\". Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationControlIdAlreadyExists": "El valor \"Id\" de \"Control\" ya existe. Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationControlIdMissing": "Falta un valor \"Id\" en \"Control\". Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "El valor \"Id\" de \"Control\" no se puede quitar porque se le hace referencia en una directiva existente. Primero, quítelo de la directiva.",
+ "claimProviderValidationControlIdTooManyControls": "La propiedad \"Control\" tiene demasiados controles. Revísela y vuelva a intentarlo.",
+ "claimProviderValidationControlIdValueReserved": "El valor \"Id\" de \"Control\" es una palabra clave reservada. Use otro id.",
+ "claimProviderValidationControlNameAlreadyExists": "El valor \"Name\" de \"Control\" ya existe. Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationControlNameMissing": "Falta un valor \"Name\" en \"Control\". Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationControlsMissing": "Falta un valor \"Controls\" en los datos. Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationDiscoveryUrlMissing": "Falta un valor \"DiscoveryUrl\" en los datos. Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationInvalid": "Los datos proporcionados no son válidos. Revíselos y vuelva a intentarlo.",
+ "claimProviderValidationInvalidJsonDefinition": "No se puede guardar el control personalizado. Revise el texto JSON y vuelva a intentarlo.",
+ "claimProviderValidationNameAlreadyExists": "El valor \"Name\" ya existe. Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationNameMissing": "Falta un valor \"Name\" en los datos. Revíselo y vuelva a intentarlo.",
+ "claimProviderValidationUnknown": "Se produjo un error desconocido al validar los datos proporcionados. Revíselo y vuelva a intentarlo.",
+ "claimProvidersNone": "No hay controles personalizados.",
+ "claimProvidersSearchPlaceholder": "Controles de búsqueda.",
+ "classicPoilcyFilterTitle": "Mostrar",
+ "classicPolicyAllPlatforms": "Todas las plataformas",
+ "classicPolicyClientAppBrowserAndNative": "Explorador, aplicaciones móviles y clientes de escritorio",
+ "classicPolicyCloudAppTitle": "Aplicación en la nube",
+ "classicPolicyControlAllow": "Permitir",
+ "classicPolicyControlBlock": "Bloquear",
+ "classicPolicyControlBlockWhenNotAtWork": "Bloquear acceso cuando no está en el trabajo",
+ "classicPolicyControlRequireCompliantDevice": "Requerir dispositivo compatible",
+ "classicPolicyControlRequireDomainJoinedDevice": "Requerir dispositivo unido al dominio",
+ "classicPolicyControlRequireMfa": "Requerir autenticación multifactor",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Requerir autenticación multifactor fuera del trabajo",
+ "classicPolicyDeleteCommand": "Eliminar",
+ "classicPolicyDeleteFailTitle": "No se pudo eliminar la directiva clásica",
+ "classicPolicyDeleteInProgressTitle": "Eliminando la directiva clásica",
+ "classicPolicyDeleteSuccessTitle": "Directiva clásica eliminada",
+ "classicPolicyDetailBladeTitle": "Detalles",
+ "classicPolicyDisableCommand": "Deshabilitar",
+ "classicPolicyDisableConfirmation": "¿Seguro que quiere deshabilitar \"{0}\"? Esta acción no se puede deshacer.",
+ "classicPolicyDisableFailDescription": "No se pudo deshabilitar \"{0}\".",
+ "classicPolicyDisableFailTitle": "No se pudo deshabilitar la directiva clásica",
+ "classicPolicyDisableInProgressDescription": "Deshabilitando \"{0}\"",
+ "classicPolicyDisableInProgressTitle": "Deshabilitando la directiva clásica",
+ "classicPolicyDisableSuccessDescription": "\"{0}\" se deshabilitó correctamente.",
+ "classicPolicyDisableSuccessTitle": "Directiva clásica deshabilitada",
+ "classicPolicyEasSupportedPlatforms": "Plataformas compatibles con Exchange ActiveSync",
+ "classicPolicyEasUnsupportedPlatforms": "Plataformas no compatibles con Exchange ActiveSync",
+ "classicPolicyExcludedPlatformsTitle": "Plataformas de dispositivos excluidas",
+ "classicPolicyFilterAll": "Todas las directivas",
+ "classicPolicyFilterDisabled": "Directivas deshabilitadas",
+ "classicPolicyFilterEnabled": "Directivas habilitadas",
+ "classicPolicyIncludeExcludeMembersDescription": "Al excluir grupos, puede realizar una migración por fases de las directivas.",
+ "classicPolicyIncludeExcludeMembersTitle": "Incluir o excluir grupos",
+ "classicPolicyIncludedPlatformsTitle": "Plataformas de dispositivo incluidas",
+ "classicPolicyManualMigrationMessage": "Esta directiva debe migrarse manualmente.",
+ "classicPolicyMigrateCommand": "Migrar",
+ "classicPolicyMigrateConfirmation": "¿Seguro que quiere migrar \"{0}\"? Esta directiva solo se puede migrar una vez.",
+ "classicPolicyMigrateFailDescription": "No se pudo migrar \"{0}\".",
+ "classicPolicyMigrateFailTitle": "No se pudo migrar la directiva clásica",
+ "classicPolicyMigrateInProgressDescription": "Migrando \"{0}\"",
+ "classicPolicyMigrateInProgressTitle": "Migrando directiva clásica",
+ "classicPolicyMigrateRecommendText": "Recomendación: Migre a las nuevas directivas de Azure Portal.",
+ "classicPolicyMigrateSuccessTitle": "La directiva clásica se migró correctamente",
+ "classicPolicyMigratedSuccessDescription": "Esta directiva clásica ahora puede administrarse en Directivas.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "Esta directiva clásica se migra en forma de {0} directivas nuevas. Las nuevas directivas pueden administrarse en Directivas.",
+ "classicPolicyNoEditPermissionMsg": "No tiene permiso para editar esta directiva. Solo los administradores globales y los administradores de seguridad pueden editarla. Haga clic aquí para obtener más información.",
+ "classicPolicySaveFailDescription": "No se pudo guardar \"{0}\".",
+ "classicPolicySaveFailTitle": "No se pudo guardar la directiva clásica",
+ "classicPolicySaveInProgressDescription": "Guardando \"{0}\"",
+ "classicPolicySaveInProgressTitle": "Guardando la directiva clásica",
+ "classicPolicySaveSuccessDescription": "\"{0}\" se guardó correctamente.",
+ "classicPolicySaveSuccessTitle": "Directiva clásica guardada",
+ "clientAppBladeLegacyInfoBanner": "La autenticación heredada no se admite actualmente.",
+ "clientAppBladeLegacyUpsellBanner": "Bloqueo de aplicaciones cliente no compatibles (versión preliminar)",
+ "clientAppBladeTitle": "Aplicaciones cliente",
+ "clientAppDescription": "Seleccionar aplicaciones cliente a las que se aplicará la directiva",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync no admite actualmente todas las demás condiciones.",
+ "clientAppLearnMore": "Controle el acceso de los usuarios a aplicaciones cliente específicas que no usan la autenticación moderna.",
+ "clientAppLegacyHeader": "Clientes de autenticación heredada",
+ "clientAppMobileDesktop": "Aplicaciones móviles y aplicaciones de escritorio",
+ "clientAppModernHeader": "Clientes de autenticación moderna",
+ "clientAppOnlySupportedPlatforms": "Aplicar directiva solo en las plataformas compatibles",
+ "clientAppSelectSpecificClientApps": "Seleccionar aplicaciones cliente",
+ "clientAppWebBrowser": "Explorador",
+ "clientAppsSelectedLabel": "{0} incluido",
+ "clientTypeBrowser": "Navegador",
+ "clientTypeEas": "Clientes de Exchange ActiveSync",
+ "clientTypeEasInfo": "Clientes de Exchange ActiveSync que solo usan la autenticación heredada.",
+ "clientTypeModernAuth": "Clientes de autenticación moderna",
+ "clientTypeOtherClients": "Otros clientes",
+ "clientTypeOtherClientsInfo": "Aquí se incluyen clientes de Office antiguos y otros protocolos de correo (POP, IMAP, SMTP, etc.). [Más información][1]\n[1]: https://aka.ms/caclientapps.\n",
+ "cloudAppCountDiffBannerText": "Se han eliminado del directorio {0} aplicaciones en la nube configuradas en la directiva, pero esto no afectará a otras aplicaciones que estén en ella. La próxima vez que actualice la sección de aplicaciones de la directiva, se quitarán automáticamente las aplicaciones que haya eliminado.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Todas las aplicaciones de Microsoft",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Permitir aplicaciones móviles, de escritorio y en la nube de Microsoft (versión preliminar)",
+ "cloudappsSelectionBladeAllCloudapps": "Todas las aplicaciones en la nube",
+ "cloudappsSelectionBladeExcludeDescription": "Seleccionar las aplicaciones en la nube que quedarán exentas de la directiva",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Seleccionar las aplicaciones en la nube excluidas",
+ "cloudappsSelectionBladeIncludeDescription": "Seleccionar las aplicaciones en la nube a las que se aplicará esta directiva",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Seleccionar",
+ "cloudappsSelectionBladeSelectedCloudapps": "Seleccionar aplicaciones",
+ "cloudappsSelectorInfoBallonText": "Servicios a los que el usuario obtiene acceso para hacer trabajos. Por ejemplo, 'Salesforce'.",
+ "cloudappsSelectorPluralExcluded": "{0} aplicaciones excluidas",
+ "cloudappsSelectorPluralIncluded": "{0} aplicaciones incluidas",
+ "cloudappsSelectorSingularExcluded": "1 aplicación excluida",
+ "cloudappsSelectorSingularIncluded": "1 aplicación incluida",
+ "cloudappsSelectorUserPlural": "{0} aplicaciones",
+ "cloudappsSelectorUserSingular": "1 aplicación",
+ "conditionLabelMulti": "{0} condiciones seleccionadas",
+ "conditionLabelOne": "1 condición seleccionada",
+ "conditionalAccessBladeTitle": "Acceso condicional",
+ "conditionsNotSelectedLabel": "Sin configurar",
+ "conditionsReqMfaReauthSet": "Algunas opciones no están disponibles debido a que la concesión “Requerir autenticación multifactor\" y el control de sesión “Frecuencia de inicio de sesión (cada vez)” están seleccionados actualmente",
+ "conditionsReqPwSet": "Algunas opciones no están disponibles debido a que la concesión \"Requerir cambio de contraseña\" se está seleccionando actualmente.",
+ "configureCasText": "Configurar Cloud App Security",
+ "configureCustomControlsText": "Configurar una directiva personalizada",
+ "controlLabelMulti": "{0} controles seleccionados",
+ "controlLabelOne": "1 control seleccionado",
+ "controlValidatorText": "Seleccione al menos un control.",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Obtenga más información sobre cómo solicitar dispositivos compatibles.",
+ "controlsDeviceComplianceInfoBubble": "El dispositivo debe ser compatible con Intune. Si el dispositivo no es compatible, se pedirá al usuario que lo haga compatible.",
+ "controlsDomainJoinedAriaLabel": "Obtenga más información sobre cómo requerir dispositivos híbridos unidos a Microsoft Entra.",
+ "controlsDomainJoinedInfoBubble": "Los dispositivos deben estar unidos a Microsoft Entra híbrido.",
+ "controlsMamAriaLabel": "Obtenga más información sobre cómo solicitar aplicaciones cliente aprobadas.",
+ "controlsMamInfoBubble": "El dispositivo debe usar estas aplicaciones cliente aprobadas.",
+ "controlsMfaInfoBubble": "El usuario debe completar los requisitos de seguridad adicionales, como llamada de teléfono o mensaje de texto.",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Obtenga más información sobre cómo solicitar aplicaciones protegidas por directivas.",
+ "controlsRequireCompliantAppInfoBubble": "El dispositivo debe usar las aplicaciones protegidas por directivas.",
+ "controlsRequirePasswordResetAriaLabel": "Obtenga más información sobre cómo solicitar un cambio de contraseña.",
+ "controlsRequirePasswordResetInfoBubble": "Requiera cambio de contraseña para reducir el riesgo de usuario. Esta opción también requiere la autenticación multifactor. No se pueden usar otros controles.",
+ "countriesRadiobuttonInfoBalloonContent": "El país o la región de procedencia de un inicio de sesión se determina a partir de la dirección IP del usuario.",
+ "createNewVpnCert": "Nuevo certificado",
+ "createdTimeLabel": "Hora de creación",
+ "customRoleLabel": "Roles personalizados (no se admite)",
+ "dateRangeTypeLabel": "Intervalo de fechas",
+ "daysOfWeekPlaceholderText": "Filtrar días de la semana",
+ "daysOfWeekTypeLabel": "Días de la semana",
+ "deletePolicyNoLicenseText": "Ya puede eliminar esta directiva. Una vez eliminada, no podrá volver a crearla hasta que disponga de las licencias necesarias.",
+ "descriptionContentForControlsAndOr": "Para varios controles",
+ "devicePlatform": "Plataforma de dispositivo",
+ "devicePlatformConditionHelpDescription": "Permite aplicar la directiva a las plataformas de dispositivos seleccionadas.\n[Más información][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} incluido",
+ "devicePlatformIncludeExclude": "{0} y {1} excluidos",
+ "devicePlatformNoSelectionError": "Para seleccionar plataformas de dispositivo, es necesario seleccionar un elemento secundario.",
+ "devicePlatformsNone": "Ninguno",
+ "deviceSelectionBladeExcludeDescription": "Seleccionar las plataformas que quedarán exentas de la directiva",
+ "deviceSelectionBladeIncludeDescription": "Seleccionar las plataformas de dispositivo que quiere incluir en esta directiva",
+ "deviceStateAll": "Todos los estados de dispositivo",
+ "deviceStateCompliant": "Dispositivo marcado como compatible",
+ "deviceStateCompliantInfoContent": "Los dispositivos compatibles con Intune se excluirán de la evaluación de esta directiva, de modo que si, por ejemplo, la directiva bloquea el acceso, bloqueará todos los dispositivos excepto los compatibles con Intune.",
+ "deviceStateConditionConfigureInfoContent": "Configurar directiva basada en el estado del dispositivo",
+ "deviceStateConditionSelectorInfoContent": "Si el dispositivo desde el que el usuario inicia sesión está \"Unido a Microsoft Entra híbrido\" o \"marcado como compatible\".\n Esto ha quedado en desuso. Use \"{1}\" en su lugar.",
+ "deviceStateConditionSelectorLabel": "Estado del dispositivo (en desuso)",
+ "deviceStateDomainJoined": "Dispositivo unido a Microsoft Entra híbrido",
+ "deviceStateDomainJoinedInfoContent": "Los dispositivos unidos a Microsoft Entra híbrido se excluirán de la evaluación de esta directiva, por lo que, por ejemplo, si la directiva bloquea el acceso, bloqueará todos los dispositivos excepto los dispositivos unidos a Microsoft Entra híbrido.",
+ "deviceStateDomainJoinedInfoLinkText": "Más información.",
+ "deviceStateExcludeDescription": "Seleccione la condición de estado del dispositivo que se usará para excluir dispositivos de la directiva.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} y excluir {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} y excluir {1}, {2}",
+ "directoryRoleInfoContent": "Asigne la directiva a roles del directorio integrados.",
+ "directoryRolesLabel": "Roles del directorio",
+ "discardbutton": "Descartar",
+ "downloadDefaultFileName": "Intervalos IP",
+ "downloadExampleFileName": "Ejemplo",
+ "downloadExampleHeader": "Este es un archivo de ejemplo con demostraciones de los tipos de datos que se pueden aceptar. Se ignorarán las líneas que comiencen por #.",
+ "duplicate": "Duplicado",
+ "duplicatePolicyName": "COPIAR {0}",
+ "endDatePickerLabel": "Extremos",
+ "endTimePickerLabel": "Hora de finalización",
+ "enterCountryText": "La dirección IP y el país o región se evalúan en un par. Seleccione el país o región.",
+ "enterIpText": "Dirección IP y País o región se evalúan en un par. Escriba la dirección IP.",
+ "enterUserText": "No hay ningún usuario seleccionado. Seleccione uno.",
+ "evaluationResult": "Resultado de la evaluación",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync solo con plataformas admitidas",
+ "excludeAllTrustedLocationSelectorText": "todas las ubicaciones de confianza",
+ "featureRequiresP2": "Esta característica requiere una licencia de Microsoft Entra ID P2.",
+ "friday": "Viernes",
+ "grantControls": "Conceder controles",
+ "gridNetworkTrusted": "De confianza",
+ "gridPolicyCreatedDateTime": "Fecha de creación",
+ "gridPolicyEnabled": "Habilitado",
+ "gridPolicyModifiedDateTime": "Fecha de modificación",
+ "gridPolicyName": "Nombre de directiva",
+ "gridPolicyState": "Estado",
+ "groupSelectionBladeExcludeDescription": "Permite seleccionar los grupos que quedarán exentos de la directiva.",
+ "groupSelectionBladeExcludedSelectorTitle": "Seleccione los grupos excluidos",
+ "groupSelectionBladeSelect": "Seleccionar grupos",
+ "groupSelectorInfoBallonText": "Grupos del directorio a los que se aplica la directiva. Por ejemplo, \"Grupo piloto\".",
+ "groupsSelectionBladeTitle": "Grupos",
+ "helpCommonScenariosText": "¿Le interesan los escenarios comunes?",
+ "helpCondition1": "Cuando cualquier usuario está fuera de la red de la compañía",
+ "helpCondition2": "Cuando inician sesión usuarios del grupo \"Administradores\"",
+ "helpConditionsTitle": "Condiciones",
+ "helpControl1": "Es necesario que inicien sesión con la autenticación multifactor",
+ "helpControl2": "Es necesario que dispongan de un dispositivo unido a un dominio o conforme a Intune.",
+ "helpControlsTitle": "Controles",
+ "helpIntroText": "El acceso condicional le permite aplicar los requisitos de acceso cuando se cumplen determinadas condiciones. Veamos algunos ejemplos.",
+ "helpIntroTitle": "¿Qué es el acceso condicional?",
+ "helpLearnMoreText": "¿Quiere obtener más información acerca del acceso condicional?",
+ "helpStartStep1": "Haga clic en \"+ Nueva directiva\" para crear su primera directiva.",
+ "helpStartStep2": "Especifique las condiciones y los controles de la directiva.",
+ "helpStartStep3": "Cuando haya terminado, no se olvide de las opciones Habilitar la directiva y Crear.",
+ "helpStartTitle": "Introducción",
+ "highRisk": "Alta",
+ "includeAndExcludeAppsTextFormat": "Incluir: {0}. Excluir: {1}.",
+ "includeAppsTextFormat": "Incluir: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Las áreas desconocidas son direcciones IP que no se pueden asignar a ningún país o región.",
+ "includeUnknownAreasCheckboxLabel": "Incluir áreas desconocidas",
+ "infoCommandLabel": "Información",
+ "invalidCertDuration": "La duración del certificado no es válida,",
+ "invalidIpAddress": "El valor debe ser una dirección IP válida.",
+ "invalidReAuthSignInRiskOptionSelected": "El control de sesión \"frecuencia de inicio de sesión cada vez\" no permite la selección \"sin riesgo\" en el control de condición \"riesgo de inicio de sesión\".",
+ "invalidUriErrorMsg": "Escriba un URI válido. Por ejemplo: \"uri:contoso.com:acr\". ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Cargar todo",
+ "loading": "Cargando...",
+ "locationConfigureNamedLocationsText": "Configurar todas las ubicaciones de confianza",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "El nombre de la ubicación es demasiado largo. Debe tener 256 caracteres como máximo.",
+ "locationSelectionBladeExcludeDescription": "Seleccionar las ubicaciones que quedarán exentas de la directiva",
+ "locationSelectionBladeIncludeDescription": "Seleccionar las ubicaciones que se incluirán en la directiva",
+ "locationsAllLocationsLabel": "Cualquier ubicación",
+ "locationsAllNamedLocationsLabel": "Todas las direcciones IP de confianza",
+ "locationsAllPrivateLinksLabel": "Todos los Private Links en mi inquilino",
+ "locationsIncludeExcludeLabel": "{0} y excluir todas las IP de confianza",
+ "locationsSelectedPrivateLinksLabel": "Private Links seleccionados",
+ "lowRisk": "Baja",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "Para administrar las directivas de acceso condicional, su organización necesita el id. P1 o P2 de Microsoft Entra.",
+ "manageSecurityDefaultsAriaLabel": "Administre la configuración de los valores predeterminados de seguridad.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Iniciar sesión desde una ubicación de confianza reduce el riesgo de inicio de sesión de un usuario. Marque esta ubicación como de confianza solo si sabe que los intervalos IP especificados están establecidos y son confiables en su organización.",
+ "markAsTrustedCheckboxLabel": "Marcar como ubicación de confianza",
+ "mediumRisk": "Mediana",
+ "memberSelectionCommandRemove": "Quitar",
+ "menuItemClaimProviderControls": "Controles personalizados (versión preliminar)",
+ "menuItemClassicPolicies": "Directivas clásicas",
+ "menuItemInsightsAndReporting": "Conclusiones e informes",
+ "menuItemManage": "Administrar",
+ "menuItemNamedLocationsPreview": "Ubicaciones con nombre (versión preliminar)",
+ "menuItemNamedNetworks": "Ubicaciones con nombre",
+ "menuItemPolicies": "Directivas",
+ "menuItemTermsOfUse": "Términos de uso",
+ "modifiedTimeLabel": "Hora de modificación",
+ "monday": "Lunes",
+ "nameLabel": "Nombre",
+ "namedLocationCountryInfoBanner": "A los países o regiones solo se les pueden asignar direcciones IPv4. Las direcciones IPv6 están incluidas en países o regiones desconocidos.",
+ "namedLocationTypeCountry": "Países/regiones",
+ "namedLocationTypeLabel": "Defina la ubicación con:",
+ "namedLocationUpsellBanner": "Esta vista está en desuso. Vaya a la vista nueva y mejorada \"ubicaciones con nombre\".",
+ "namedLocationsHelpDescription": "Los informes de seguridad de Microsoft Entra ID usan ubicaciones con nombre para reducir los falsos positivos y las directivas de acceso condicional de Microsoft Entra.\n[Más información][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Agregue un nuevo intervalo IP (p. ej., 40.77.182.32/27).",
+ "namedNetworkCountryNeeded": "Debe seleccionar, al menos, un país o región.",
+ "namedNetworkDeleteCommand": "Eliminar",
+ "namedNetworkDeleteDescription": "¿Está seguro de que quiere eliminar '{0}'? Esta acción no se puede deshacer.",
+ "namedNetworkDeleteTitle": "¿Está seguro?",
+ "namedNetworkDownloadIpRange": "Descargar",
+ "namedNetworkInvalidRange": "El valor debe ser un intervalo IP válido.",
+ "namedNetworkIpRangeNeeded": "Necesita al menos un intervalo IP válido.",
+ "namedNetworkIpRangesDescriptionContent": "Configure los intervalos IP de su organización.",
+ "namedNetworkIpRangesTab": "Intervalos IP",
+ "namedNetworkListAdd": "Nueva ubicación",
+ "namedNetworkListConfigureTrustedIps": "Configuración de las direcciones IP de confianza de la autenticación multifactor",
+ "namedNetworkNameDescription": "Ejemplo: 'Oficina de Redmond'",
+ "namedNetworkNameInvalid": "El nombre proporcionado no es válido.",
+ "namedNetworkNameRequired": "Debe proporcionar un nombre para esta ubicación.",
+ "namedNetworkNoIpRanges": "No hay intervalos IP",
+ "namedNetworkNotificationCreateDescription": "Creando ubicación con el nombre '{0}'",
+ "namedNetworkNotificationCreateFailedDescription": "Error al crear la ubicación '{0}'. Vuelva a intentarlo más tarde.",
+ "namedNetworkNotificationCreateFailedTitle": "No se puede crear la ubicación.",
+ "namedNetworkNotificationCreateSuccessDescription": "Ubicación con el nombre '{0}' creada",
+ "namedNetworkNotificationCreateSuccessTitle": "Se creó {0}.",
+ "namedNetworkNotificationCreateTitle": "Creando {0}",
+ "namedNetworkNotificationDeleteDescription": "Eliminando ubicación con el nombre '{0}'",
+ "namedNetworkNotificationDeleteFailedDescription": "Error al eliminar la ubicación '{0}'. Vuelva a intentarlo más tarde.",
+ "namedNetworkNotificationDeleteFailedTitle": "No se puede eliminar la ubicación.",
+ "namedNetworkNotificationDeleteSuccessDescription": "Ubicación con el nombre '{0}' eliminada",
+ "namedNetworkNotificationDeleteSuccessTitle": "Se eliminó '{0}'.",
+ "namedNetworkNotificationDeleteTitle": "Eliminando '{0}'",
+ "namedNetworkNotificationUpdateDescription": "Actualizando ubicación con el nombre '{0}'",
+ "namedNetworkNotificationUpdateFailedDescription": "Error al actualizar la ubicación '{0}'. Vuelva a intentarlo más tarde.",
+ "namedNetworkNotificationUpdateFailedTitle": "No se puede actualizar la ubicación.",
+ "namedNetworkNotificationUpdateSuccessDescription": "Ubicación con el nombre '{0}' actualizada",
+ "namedNetworkNotificationUpdateSuccessTitle": "Se actualizó {0}.",
+ "namedNetworkNotificationUpdateTitle": "Actualizando '{0}'",
+ "namedNetworkSearchPlaceholder": "Buscar ubicaciones.",
+ "namedNetworkUploadFailedDescription": "Se produjo un error al analizar el archivo suministrado. Asegúrese de cargar un archivo sin formato con cada línea en el formato CIDR.",
+ "namedNetworkUploadFailedTitle": "No se pudo analizar \"{0}\"",
+ "namedNetworkUploadInProgressDescription": "Intentando analizar los valores de CIDR válidos de \"{0}\".",
+ "namedNetworkUploadInProgressTitle": "Analizando \"{0}\"",
+ "namedNetworkUploadInvalidDescription": "\"{0}\" es demasiado grande o tiene un formato no válido.",
+ "namedNetworkUploadInvalidTitle": "\"{0}\" no válido",
+ "namedNetworkUploadIpRange": "Cargar",
+ "namedNetworkUploadSuccessDescription": "Se analizaron {0} líneas. {1} tienen un formato erróneo y {2} se omitieron.",
+ "namedNetworkUploadSuccessTitle": "Se finalizó el análisis de \"{0}\"",
+ "namedNetworksAdd": "Nueva ubicación con nombre",
+ "namedNetworksConditionHelpDescription": "Controle el acceso del usuario en función de su ubicación física.\n[Más información][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} y {1} excluidos",
+ "namedNetworksHelpDescription": "Los informes de seguridad del id. de Microsoft Entra usan ubicaciones con nombre para reducir los falsos positivos y las directivas de acceso condicional de Microsoft Entra.\n[Obtener más información][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} incluido",
+ "namedNetworksNone": "No se han encontrado ubicaciones con nombre.",
+ "namedNetworksTitle": "Configurar ubicaciones",
+ "namednetworkExceedingSizeErrorBladeTitle": "Detalles del error",
+ "namednetworkExceedingSizeErrorDetailText": "Haga clic aquí para obtener más detalles.",
+ "namednetworkExceedingSizeErrorMessage": "Ha superado el almacenamiento máximo permitido para las ubicaciones con nombre. Vuelva a intentarlo con una lista más corta. Haga clic aquí para ver más detalles.",
+ "needMfaSecondary": "Se tiene que seleccionar “Requerir autenticación multifactor” cuando se seleccione “Frecuencia de inicio de sesión (cada vez)” junto a “Solo métodos de autenticación secundarios”",
+ "needMfaSpecificApps": "El control de sesión \"Frecuencia de inicio de sesión cada vez\" requiere el control de concesión \"Requerir autenticación multifactor\" cuando se seleccionan aplicaciones admitidas específicamente",
+ "newCertName": "nuevo certificado",
+ "noAttributePermissionsError": "Privilegios insuficientes para crear o actualizar la directiva. El rol lector de definición de atributos es necesario para agregar o editar filtros dinámicos.",
+ "noPolicyRowMessage": "No hay directivas.",
+ "noSPSelected": "Ninguna entidad de servicio seleccionada",
+ "noUpdatePermissionMessage": "No tiene permiso para actualizar esta configuración. Póngase en contacto con el administrador global para obtener acceso.",
+ "noUserSelected": "Ningún usuario seleccionado",
+ "noneRisk": "Sin riesgo",
+ "office365Description": "Estas aplicaciones incluyen, entre otras, Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online y Office 365 Yammer.",
+ "office365InfoBox": "Al menos una de las aplicaciones seleccionadas es parte de Office 365. Se recomienda establecer la directiva en la aplicación de Office 365 en su lugar.",
+ "oneUserSelected": "1 usuario seleccionado",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Solo los administradores globales pueden guardar esta directiva.",
+ "or": "{0} O {1} ",
+ "pickerDoneCommand": "Listo",
+ "policiesBladeAdPremiumUpsellBannerText": "Crear sus propias directivas y dirigir condiciones específicas, como aplicaciones en la nube, riesgo de inicio de sesión y plataformas de dispositivos con el id. de Microsoft Entra Premium",
+ "policiesBladeTitle": "Directivas",
+ "policiesBladeTitleWithAppName": "Directivas: {0}",
+ "policiesDisabledBannerText": "No se permite crear ni editar directivas para las aplicaciones que tengan un atributo de inicio de sesión vinculado.",
+ "policiesHitMaxLimitStatusBarMessage": "Ha alcanzado el número máximo de directivas para este inquilino. Para poder crear más, primero deberá eliminar algunas.",
+ "policyAssignmentsSection": "Tareas",
+ "policyBlockAllInfoBox": "La directiva configurada bloqueará a todos los usuarios, por lo que no se admite. Revise las asignaciones y los controles. Excluya el usuario actual {0} si desea guardar esta directiva.",
+ "policyCloudAppsDisplayTextAllApp": "Todas las aplicaciones",
+ "policyCloudAppsLabel": "Aplicaciones en la nube",
+ "policyConditionClientAppDescription": "Software que usa el usuario para obtener acceso a la aplicación en la nube. Por ejemplo, 'Navegador'.",
+ "policyConditionClientAppV2Description": "Software que usa el usuario para obtener acceso a la aplicación en la nube. Por ejemplo, 'Navegador'.",
+ "policyConditionDevicePlatform": "Plataformas de dispositivo",
+ "policyConditionDevicePlatformDescription": "Plataforma desde la que inicia sesión el usuario. Por ejemplo, 'iOS'.",
+ "policyConditionLocation": "Ubicaciones",
+ "policyConditionLocationDescription": "Ubicación (determinada con el intervalo de direcciones IP) desde la que inicia sesión el usuario",
+ "policyConditionLocationPreview": "Ubicaciones (versión preliminar)",
+ "policyConditionSigninRisk": "Riesgo de inicio de sesión",
+ "policyConditionSigninRiskDescription": "Probabilidad de que el inicio de sesión proceda de otra persona que no sea el usuario. El nivel de riesgo puede ser alto, medio o bajo. Requiere una licencia de Microsoft Entra ID P2.",
+ "policyConditionUserRisk": "Riesgo de usuario",
+ "policyConditionUserRiskDescription": "Configure los niveles de riesgo de usuario necesarios para aplicar la directiva.",
+ "policyConditioniClientApp": "Aplicaciones cliente",
+ "policyControlAllowAccessDisplayedName": "Conceder acceso",
+ "policyControlAuthenticationStrengthDisplayedName": "Requerir intensidad de autenticación (versión preliminar)",
+ "policyControlBladeTitle": "Conceder",
+ "policyControlBlockAccessDisplayedName": "Bloquear acceso",
+ "policyControlCompliantDeviceDisplayedName": "Requerir que el dispositivo esté marcado como compatible",
+ "policyControlContentDescription": "Aplique controles de acceso para bloquear o conceder acceso.",
+ "policyControlInfoBallonText": "Bloquear acceso o seleccionar los requisitos adicionales que se deben cumplir para conceder acceso",
+ "policyControlMfaChallengeDisplayedName": "Requerir autenticación multifactor",
+ "policyControlRequireCompliantAppDisplayedName": "Requerir directiva de protección de aplicaciones",
+ "policyControlRequireDomainJoinedDisplayedName": "Requerir dispositivo unido a Microsoft Entra híbrido",
+ "policyControlRequireMamDisplayedName": "Requerir aplicación cliente aprobada",
+ "policyControlRequiredPasswordChangeDisplayedName": "Requerir cambio de contraseña",
+ "policyControlSelectAuthStrength": "Requerir intensidad de autenticación",
+ "policyControlsNoControlsSelected": "0 controles seleccionados",
+ "policyControlsSection": "Controles de acceso",
+ "policyCreatBladeTitle": "Nueva",
+ "policyCreateButton": "Crear",
+ "policyCreateFailedMessage": "Error: {0}",
+ "policyCreateFailedTitle": "No se pudo crear \"{0}\"",
+ "policyCreateInProgressTitle": "Creando {0}",
+ "policyCreateSuccessMessage": "\"{0}\" se creó correctamente. La directiva se habilitará dentro de unos minutos si tiene la opción \"Habilitar directiva\" establecida en \"Activado\".",
+ "policyCreateSuccessTitle": "\"{0}\" se creó correctamente",
+ "policyDeleteConfirmation": "¿Está seguro de que quiere eliminar '{0}'? Esta acción no se puede deshacer.",
+ "policyDeleteFailTitle": "No se pudo eliminar '{0}'.",
+ "policyDeleteInProgressTitle": "Eliminando '{0}'",
+ "policyDeleteSuccessTitle": "'{0}' se eliminó correctamente.",
+ "policyEnforceLabel": "Habilitar directiva",
+ "policyErrorCannotSetSigninRisk": "No tiene permiso para guardar una directiva con una condición de riesgo de inicio de sesión.",
+ "policyErrorNoPermission": "No tiene permiso para guardar la directiva. Póngase en contacto con el administrador global.",
+ "policyErrorUnknown": "Se ha producido un error; inténtelo de nuevo más tarde.",
+ "policyFallbackWarningMessage": "No se pudo crear o actualizar \"{0}\" mediante MS Graph que da lugar a un retorno a AD Graph. Investigue el siguiente escenario, ya que lo más probable es que haya un error al llamar al punto final de la directiva para MS Graph con una condición incompatible.",
+ "policyFallbackWarningTitle": "Se realizó correctamente una parte de la creación o actualización de \"{0}\"",
+ "policyNameCannotBeEmpty": "El nombre de directiva no puede estar vacío.",
+ "policyNameDevice": "Directiva de dispositivo",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Directiva de administración de aplicaciones móviles",
+ "policyNameMfaLocation": "Autenticación multifactor y directiva de ubicación",
+ "policyNamePlaceholderText": "Ejemplo: 'directiva de aplicaciones de cumplimiento de dispositivos'",
+ "policyNameTooLongError": "El nombre de la directiva es demasiado largo. Debe tener 256 caracteres como máximo.",
+ "policyOff": "Desactivado",
+ "policyOn": "Activado",
+ "policyReportOnly": "Solo informe",
+ "policyReviewSection": "Revisar",
+ "policySaveButton": "Guardar",
+ "policyStatusIconDescription": "La directiva está habilitada.",
+ "policyStatusIconEnabled": "Icono de estado habilitado",
+ "policyTemplateName1": "Usar las restricciones que exige la aplicación en el acceso al navegador para {0}",
+ "policyTemplateName2": "Permitir que {0} acceda solo a dispositivos administrados",
+ "policyTemplateName3": "Directiva migrada desde la configuración de la Evaluación continua de acceso",
+ "policyTriggerRiskSpecific": "Seleccionar un nivel de riesgo específico",
+ "policyTriggersInfoBalloonText": "Condiciones que definen cuándo se aplicará la directiva. Por ejemplo, 'ubicación'.",
+ "policyTriggersNoConditionsSelected": "0 condiciones seleccionadas",
+ "policyTriggersSelectorLabel": "Condiciones",
+ "policyUpdateFailedMessage": "Error: {0}",
+ "policyUpdateFailedTitle": "No se pudo actualizar {0}",
+ "policyUpdateInProgressTitle": "Actualizando {0}",
+ "policyUpdateSuccessMessage": "{0} se actualizó correctamente. La directiva se habilitará dentro de unos minutos si tiene la opción \"Habilitar directiva\" establecida en \"Activado\".",
+ "policyUpdateSuccessTitle": "{0} se ha actualizado correctamente",
+ "primaryCol": "Principal",
+ "privateLinkLabel": "Private Link de Microsoft Entra ID",
+ "reportOnlyInfoBox": "Modo de solo informe: las directivas se evalúan y se registran al iniciar sesión, pero no afectan a los usuarios.",
+ "requireAllControlsText": "Requerir todos los controles seleccionados",
+ "requireCompliantDevice": "Requerir dispositivo compatible",
+ "requireDomainJoined": "Se necesita un dispositivo unido a un dominio.",
+ "requireGrantReauth": "El control de sesión “Frecuencia de inicio de sesión (cada vez)” requiere un control de concesión “Requerir autenticación multifactor” o “Requerir cambio de contraseña” cuando se selecciona “Todas las aplicaciones en la nube”",
+ "requireMFA": "Requerir autenticación multifactor",
+ "requireMfaReauth": "El control de sesión “Frecuencia de inicio de sesión (cada vez)” requiere el control de concesión “Requerir autenticación multifactor” para “Riesgo de inicio de sesión”",
+ "requireOneControlText": "Requerir uno de los controles seleccionados",
+ "requirePasswordChangeReauth": "El control de sesión \"Frecuencia de inicio de sesión cada vez\" requiere el control de concesión \"requerir cambio de contraseña\" para \"riesgo de usuario\".",
+ "requireRiskReauth": "El control de sesión \"frecuencia de inicio de sesión cada vez\" requiere el control de sesión \"riesgo de usuario\" o \"riesgo de inicio de sesión\" cuando se selecciona \"todas las aplicaciones en la nube\".",
+ "requireRiskReauthRiskNotEnabled": "El control de sesión \"Frecuencia de inicio de sesión (cada vez)\" no está disponible cuando la opción \"Todas las aplicaciones en la nube\" está seleccionada.",
+ "requireRiskReauthSignInOnly": "El control de sesión \"Frecuencia de inicio de sesión (cada vez)\" requiere el control de sesión \"Riesgo de inicio de sesión\" cuando la opción \"Todas las aplicaciones en la nube\" está seleccionada.",
+ "requireRiskReauthUserOnly": "El control de sesión \"Frecuencia de inicio de sesión (cada vez)\" requiere el control de sesión \"Riesgo de usuario\" cuando la opción \"Todas las aplicaciones en la nube\" está seleccionada.",
+ "resetFilters": "Restablecer filtros",
+ "sPRequired": "Se requiere una entidad de servicio",
+ "sPSelectorInfoBalloon": "Usuario o entidad de servicio que desea probar",
+ "saturday": "Sábado",
+ "searchTextTooLongError": "El texto de búsqueda es demasiado largo. No puede tener más de 256 caracteres.",
+ "securityDefaultsPolicyName": "Valores predeterminados de seguridad",
+ "securityDefaultsTextMessage": "Para habilitar la directiva de acceso condicional, deben deshabilitarse los valores predeterminados de seguridad.",
+ "securityDefaultsUpdateInProgressText": "Hay una actualización de los valores predeterminados de seguridad en curso. Espere un momento y vuelva a intentarlo.",
+ "securityDefaultsWarningMessage": "Parece que va a administrar las opciones de configuración de seguridad de su organización. ¡Excelente! Primero debe {0}deshabilitar los valores predeterminados de seguridad{1} antes de habilitar una directiva de acceso condicional.",
+ "selectDevicePlatforms": "Seleccionar plataformas de dispositivo",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Seleccionar ubicaciones",
+ "selectedSP": "Entidad de servicio seleccionada",
+ "servicePrincipalBladeExcludedSelectorTitle": "Seleccionar entidades de servicio excluidas",
+ "servicePrincipalBladeIncludedSelectorTitle": "Seleccionar entidades de servicio",
+ "servicePrincipalDataGridAria": "Lista de entidades de servicio disponibles",
+ "servicePrincipalDropDownLabel": "¿A qué se aplica esta directiva?",
+ "servicePrincipalInfoBox": "Algunas condiciones no están disponibles debido a la selección de \"{0}\" en la asignación de directiva",
+ "servicePrincipalRadioAll": "Todas las entidades de servicio de las que es propietario",
+ "servicePrincipalRadioSelect": "Seleccionar entidades de servicio",
+ "servicePrincipalSelectionsAria": "Cuadrícula de entidades de servicio seleccionadas",
+ "servicePrincipalSelectorAria": "Lista de entidades de servicio elegidas",
+ "servicePrincipalSelectorMultiple": "{0} entidades de servicio seleccionadas",
+ "servicePrincipalSelectorSingle": "1 entidad de servicio seleccionada",
+ "servicePrincipalSpecificExc": "Entidades de servicio específicas excluidas",
+ "servicePrincipalSpecificInc": "Entidades de servicio específicas incluidas",
+ "servicePrincipals": "Entidades de seguridad",
+ "sessionControlBladeTitle": "Sesión",
+ "sessionControlDescriptionContent": "Controle el acceso con controles de sesión para habilitar experiencias limitadas en determinadas aplicaciones en la nube.",
+ "sessionControlDisableInfo": "Este control solo funciona con aplicaciones compatibles. Actualmente, Office 365, Exchange Online y SharePoint Online son las únicas aplicaciones en la nube compatibles con las restricciones que exige la aplicación. Haga clic aquí para obtener más información.",
+ "sessionControlInfoBallonText": "Los controles de sesión proporcionan una experiencia limitada en una aplicación de nube.",
+ "sessionControls": "Controles de sesión",
+ "sessionControlsAppEnforcedLabel": "Usar restricciones que exige la aplicación",
+ "sessionControlsCasLabel": "Utilizar el Control de aplicaciones de acceso condicional",
+ "sessionControlsSecureSignInLabel": "Requerir enlace de tokens",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} incluido",
+ "signinRiskReauth": "Se tiene que seleccionar la condición “Riesgo de inicio de sesión” cuando se seleccionen la concesión “Requerir autenticación multifactor” y el control de sesión “Frecuencia de inicio de sesión (cada vez)”",
+ "signinRiskTriggerDescriptionContent": "Seleccionar el nivel de riesgo de inicio de sesión",
+ "singleTenantServicePrincipalInfoBallonText": "La directiva solo se aplica a las entidades de servicio de inquilino único que pertenecen a su organización. Haga clic aquí para más información ",
+ "specificSigninRiskLevelsOption": "Seleccionar niveles de riesgo de inicio de sesión específicos",
+ "specificUsersExcluded": "usuarios específicos excluidos",
+ "specificUsersIncluded": "Usuarios específicos incluidos",
+ "specificUsersIncludedAndExcluded": "Usuarios específicos excluidos e incluidos",
+ "startDatePickerLabel": "Se inicia el",
+ "startFreeTrial": "Iniciar prueba gratuita",
+ "startTimePickerLabel": "Hora de inicio",
+ "sunday": "Domingo",
+ "testButton": "What If",
+ "thumbprintCol": "Huella digital",
+ "thursday": "Jueves",
+ "timeConditionAllTimesLabel": "En cualquier momento",
+ "timeConditionIntroText": "Configure la hora a la que se aplicará esta directiva.",
+ "timeConditionSelectorInfoBallonContent": "Cuando el usuario inicie sesión; por ejemplo, \"Miércoles 9:00 - 17:00 PST\"",
+ "timeConditionSelectorLabel": "Hora (versión preliminar)",
+ "timeConditionSpecificLabel": "Horas específicas (versión preliminar)",
+ "timeSelectorAllTimesText": "En cualquier momento",
+ "timeSelectorSpecificTimesText": "Horas concretas configuradas",
+ "timeZoneDropdownInfoBalloonContent": "Seleccione una zona horaria que defina el intervalo de tiempo. Esta directiva se aplica a los usuarios de todas las zonas horarias. Por ejemplo, \"Miércoles 9:00 - 17:00\" para un usuario sería \"Miércoles 10:00 - 18:00\" para un usuario de otra zona horaria.",
+ "timeZoneDropdownLabel": "Zona horaria",
+ "timeZoneDropdownPlaceholderText": "Seleccione una zona horaria.",
+ "tooManyPoliciesDescription": "En este momento, solo se muestran las 50 primeras directivas. Haga clic aquí para verlas todas.",
+ "tooManyPoliciesTitle": "Se encontraron más de 50 directivas.",
+ "trustedLocationStatusIconDescription": "La ubicación es de confianza.",
+ "trustedLocationStatusIconEnabled": "Icono de estado de confianza",
+ "tuesday": "Martes",
+ "uploadInBadState": "No se puede cargar el archivo especificado.",
+ "upsellAppsDescription": "Requiera la autenticación multifactor para las aplicaciones confidenciales siempre o solo desde fuera de la red de la empresa.",
+ "upsellAppsTitle": "Aplicaciones seguras",
+ "upsellBannerText": "Obtener una prueba gratuita Premium para usar esta característica",
+ "upsellDataDescription": "Requiera que el dispositivo se marque como compatible o unido a Microsoft Entra híbrido para permitir el acceso a los recursos de la compañía.",
+ "upsellDataTitle": "Datos seguros",
+ "upsellDescription": "El acceso condicional proporciona el control y la protección que necesita para mantener protegidos sus datos corporativos, a la vez que ofrece a los usuarios una experiencia que les permite trabajar de forma óptima desde cualquier dispositivo. Por ejemplo, puede restringir el acceso desde fuera de la red de la empresa o a dispositivos que cumplan determinadas directivas.",
+ "upsellRiskDescription": "Requerir la autenticación multifactor para los eventos de riesgo que detecte el sistema de aprendizaje automático de Microsoft.",
+ "upsellRiskTitle": "Protección frente al riesgo",
+ "upsellTitle": "Acceso condicional",
+ "upsellWhyTitle": "¿Por qué debe usar el acceso condicional?",
+ "userAppNoneOption": "Ninguno",
+ "userNamePlaceholderText": "Escribir nombre de usuario",
+ "userNotSetSeletorLabel": "0 usuarios y grupos seleccionados",
+ "userOnlySelectionBladeExcludeDescription": "Permite seleccionar los usuarios que quedarán exentos de la directiva.",
+ "userOrGroupSelectionCountDiffBannerText": "Se han eliminado del directorio {0} configurados en la directiva, pero esto no afectará a otros usuarios y grupos que estén en ella. La próxima vez que actualice la directiva, se quitarán automáticamente los usuarios o grupos que haya eliminado.",
+ "userOrSPNotSetSelectorLabel": "0 usuarios o identidades de carga de trabajo seleccionadas",
+ "userOrSPSelectionBladeTitle": "Usuarios o identidades de la carga de trabajo",
+ "userOrSPSelectorInfoBallonText": "Las identidades en el directorio al que se aplica la directiva, incluidos usuarios, grupos y entidades de servicio",
+ "userRequired": "Usuario obligatorio",
+ "userRiskErrorBox": "Se debe seleccionar la condición \"Riesgo de usuario\" si se ha seleccionado la concesión \"Requerir cambio de contraseña\".",
+ "userRiskReauth": "Se debe seleccionar la condición \"Riesgo de usuario\" y no \"Riesgo de inicio de sesión\" cuando se seleccione la concesión \"Requerir cambio de contraseña\" y el control de sesión \"Frecuencia de inicio de sesión (cada vez)\"",
+ "userSPRequired": "Se requiere un usuario o una entidad de servicio",
+ "userSPSelectorTitle": "Identidad del usuario o de la carga de trabajo",
+ "userSelectionBladeAllUsersAndGroups": "Todos los usuarios y grupos",
+ "userSelectionBladeExcludeDescription": "Seleccionar los usuarios y grupos que quedarán exentos de la directiva",
+ "userSelectionBladeExcludeTabTitle": "Excluir",
+ "userSelectionBladeExcludedSelectorTitle": "Seleccionar usuarios y grupos excluidos",
+ "userSelectionBladeIncludeDescription": "Seleccione los usuarios a los que se aplicará esta directiva.",
+ "userSelectionBladeIncludeTabTitle": "Incluir",
+ "userSelectionBladeIncludedSelectorTitle": "Seleccionar",
+ "userSelectionBladeSelectUsers": "Seleccionar usuarios",
+ "userSelectionBladeSelectedUsers": "Seleccionar usuarios y grupos",
+ "userSelectionBladeTitle": "Usuarios y grupos",
+ "userSelectorBladeTitle": "Usuarios",
+ "userSelectorExcluded": "{0} excluido",
+ "userSelectorGroupPlural": "{0} grupos",
+ "userSelectorGroupSingular": "1 grupo",
+ "userSelectorIncluded": "{0} incluido",
+ "userSelectorInfoBallonText": "Usuarios y grupos del directorio a los que se aplica la directiva. Por ejemplo, 'Grupo piloto'.",
+ "userSelectorSelected": "{0} seleccionados",
+ "userSelectorTitle": "Usuario",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "Usuarios de {0}",
+ "userSelectorUserSingular": "1 usuario",
+ "userSelectorWithExclusion": "{0} y {1}",
+ "usersGroupsLabel": "Usuarios y grupos",
+ "viewApprovedAppsText": "Ver la lista de aplicaciones cliente aprobadas",
+ "viewCompliantAppsText": "Ver la lista de aplicaciones cliente protegidas por directivas",
+ "viewPolicyInformation": "Ver la información de directivas",
+ "vpnBladeTitle": "conectividad VPN",
+ "vpnCertCreateFailedMessage": "Error: {0}",
+ "vpnCertCreateFailedTitle": "No se pudo crear {0}",
+ "vpnCertCreateInProgressTitle": "Creando {0}",
+ "vpnCertCreateSuccessMessage": "{0} se creó correctamente.",
+ "vpnCertCreateSuccessTitle": "{0} se creó correctamente.",
+ "vpnCertNoRowsMessage": "No se encontraron certificados VPN.",
+ "vpnCertUpdateFailedMessage": "Error: {0}",
+ "vpnCertUpdateFailedTitle": "No se pudo actualizar {0}",
+ "vpnCertUpdateInProgressTitle": "Actualizando {0}",
+ "vpnCertUpdateSuccessMessage": "{0} se actualizó correctamente.",
+ "vpnCertUpdateSuccessTitle": "{0} se ha actualizado correctamente",
+ "vpnFeatureInfo": "Para obtener más información sobre el acceso condicional y la conectividad VPN, haga clic aquí.",
+ "vpnFeatureWarning": "Una vez que se crea un certificado VPN en Azure Portal, el id. de Microsoft Entra empezará a usarlo inmediatamente para emitir certificados de corta duración al cliente VPN. Es fundamental que el certificado VPN se implemente inmediatamente en el servidor VPN para evitar cualquier problema con la validación de credenciales del cliente VPN.",
+ "vpnMenuText": "conectividad VPN",
+ "vpncertDropdownDefaultOption": "Duración",
+ "vpncertDropdownInfoBalloonContent": "Seleccione la duración para el certificado que quiere crear.",
+ "vpncertDropdownLabel": "Seleccionar duración",
+ "vpncertDropdownOneyearOption": "1 año",
+ "vpncertDropdownThreeyearOption": "3 años",
+ "vpncertDropdownTwoyearOption": "2 años",
+ "wednesday": "Miércoles",
+ "whatIfCountry": "País o región",
+ "whatIfCountryInfo": "País o región desde el que inicia sesión el usuario.",
+ "whatIfDevicePlatformInfo": "Plataforma del dispositivo desde la que inicia sesión el usuario.",
+ "whatIfEnterIpAddress": "Escriba la dirección IP (p. ej., 40.77.182.32).",
+ "whatIfErrorInvalidIpAddress": "Se ha especificado una dirección IP no válida.",
+ "whatIfIpAddress": "Dirección IP",
+ "whatIfIpAddressInfo": "Dirección IP desde la que inicia sesión el usuario.",
+ "whatIfIpCountryInfoBoxText": "Si usa Dirección IP o País o región, ambos campos serán necesarios y deberá asignarlos correctamente al mismo tiempo.",
+ "whatIfSelectCountry": "Seleccione el país o la región...",
+ "whatIfSelectDevicePlatform": "Seleccionar plataforma del dispositivo...",
+ "whatIfSelectPrivateLink": "Seleccione un vínculo privado...",
+ "whatIfSelectSignInRisk": "Seleccionar riesgo de inicio de sesión...",
+ "whatIfSignInRisk": "Riesgo de inicio de sesión",
+ "whatIfSignInRiskInfo": "Nivel de riesgo asociado con el inicio de sesión.",
+ "whatIfUnknownAreas": "Áreas desconocidas",
+ "windows365InfoBox": "Al seleccionar Windows 365, esta acción impactará en las conexiones a los equipos en la nube y los hosts de sesión de Azure Virtual Desktop. Haga clic aquí para obtener más información.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Identidades de carga de trabajo (versión preliminar)",
+ "workloadIdentitiesLicenseText": "Se requiere una licencia P1 o P2 de identidades de carga de trabajo para editar esta directiva.",
+ "workloadIdentity": "Identidad de la carga de trabajo"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Información general"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Buscar por dispositivo, usuario o versión de actualización de calidad."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "No se pudieron cargar los perfiles de actualización de software de iOS."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Perfil de actualización de iOS",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "perfil"
+ },
+ "listLoadError": "No se pueden cargar los perfiles de actualización de software de iOS; vuelva a intentarlo más tarde.",
+ "lowercase": "Directiva de actualización de iOS",
+ "uppercase": "Directiva de actualización de iOS"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "No se puede conectar con Apple para obtener la lista de versiones disponibles. Vuelva a intentarlo más tarde o continúe con la última versión.",
+ "latestUpdate": "Última actualización",
+ "noLongerSupported": "Ya no se admite la versión seleccionada",
+ "olderVersionSelected": "Dado que ha seleccionado una versión anterior, asegúrese de aplicar una directiva de restricción de dispositivos que aplace la visibilidad de las actualizaciones de software para que los dispositivos no puedan actualizarse a la última versión.",
+ "prefix": "Instalar iOS/iPadOS",
+ "selectSupported": "Seleccionar la versión de actualización que admite Apple",
+ "updateToInstall": "Actualización para instalar"
+ },
+ "Schedule": {
+ "always": "Actualizar en la siguiente sincronización",
+ "duringTimeWindows": "Actualizar durante la hora programada",
+ "header": "De forma predeterminada, cuando se asigna una directiva de actualizaciones a un dispositivo, Intune implementa las últimas actualizaciones al sincronizar el dispositivo. En su lugar, puede crear una programación semanal con horas de inicio y finalización personalizadas. Si elige actualizar fuera de la hora programada, Intune no implementará las actualizaciones hasta que finalice dicha hora.",
+ "infoBalloon": "Cuándo tendrán lugar las actualizaciones. Se requiere la entrada adicional para programar actualizaciones durante las horas programadas o fuera de estas.",
+ "label": "Tipo de programación",
+ "outsideActiveHours": "Actualizar fuera de las horas activas (heredado)",
+ "outsideTimeWindows": "Actualizar fuera de la hora programada",
+ "timeWindow": "Período de tiempo",
+ "timeZone": "Zona horaria",
+ "title": "Actualizar la configuración de programación de directiva:",
+ "weekly": "Programación semanal",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "Versión de iOS/iPadOS que se va a instalar en los dispositivos en el momento de la actualización.",
+ "label": "Seleccionar la versión para instalar"
+ },
+ "header": "Crear un perfil para forzar a los dispositivos asignados a instalar automáticamente las últimas actualizaciones de iOS/iPadOS. Estos ajustes determinan cómo y cuándo se implementan las actualizaciones de software. Este perfil no impide que los usuarios actualicen el sistema operativo manualmente, lo que puede evitarse durante un máximo de 90 días con una política de restricción de configuración de dispositivos. Las actualizaciones sólo se aplicarán a los dispositivos supervisados.",
+ "notAvailable": "N/D"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "No hay directivas de actualización de iOS para mostrar",
+ "macOsUpdates": "No hay directivas de actualización de software macOS para mostrar",
+ "windowsUpdates": "No hay anillos de actualización de Windows 10 y versiones posteriores para mostrar."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Nombre del dispositivo",
+ "deviceUpdateStatus": "Estado de actualización del dispositivo",
+ "lastUpdated": "Última actualización",
+ "osVersion": "Versión del SO",
+ "userPrincipalName": "Nombre de usuario"
+ },
+ "maximumOSVersionFilter": "Versión máxima del sistema operativo",
+ "minimumOSVersionFilter": "Versión mínima del sistema operativo",
+ "noData": "No hay datos para mostrar.",
+ "searchBoxPlaceholder": "Buscar por nombre de dispositivo, nombre de usuario o versión de sistema operativo",
+ "title": "Resumen de cuentas para dispositivos macOS"
+ },
+ "Category": {
+ "configurationDataFile": "Archivo de datos de configuración",
+ "critical": "Crítico",
+ "firmware": "Firmware",
+ "other": "Otro"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Última actualización",
+ "successfulUpdateCount": "Actualizaciones correctas implementadas",
+ "totalUpdateCount": "Total de actualizaciones implementadas",
+ "updateCategory": "Categoría de actualización",
+ "updateCategoryStatus": "Estado de la categoría de actualización"
+ },
+ "noData": "No hay datos para mostrar."
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "No se pudieron cargar los perfiles de actualización de software de macOS."
+ }
+ },
+ "State": {
+ "available": "Disponible",
+ "commandFailed": "Error del comando",
+ "downloadFailed": "Error en la descarga.",
+ "downloadInsufficientNetwork": "Red insuficiente para la descarga",
+ "downloadInsufficientPower": "Potencia insuficiente para la descarga",
+ "downloadInsufficientSpace": "Espacio insuficiente para la descarga",
+ "downloaded": "Descargado",
+ "downloading": "Descargando",
+ "idle": "Inactivo",
+ "installFailed": "No se pudo realizar la instalación",
+ "installInsufficientPower": "Potencia insuficiente para la instalación",
+ "installInsufficientSpace": "Espacio insuficiente para la instalación",
+ "installing": "Instalando",
+ "scheduled": "Programada",
+ "success": "Correcto",
+ "unknown": "Desconocido"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Última actualización",
+ "updateName": "Nombre de actualización",
+ "updateStatus": "Estado de actualización",
+ "version": "Versión"
+ },
+ "noData": "No hay datos para mostrar.",
+ "searchBoxPlaceholder": "Buscar por nombre o versión de actualización"
+ },
+ "SummaryBlade": {
+ "subtitle": "Perfil de actualización de macOS",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Perfil"
+ },
+ "error": "Error",
+ "errorOrErrors": "Errores",
+ "errors": "Errores",
+ "listLoadError": "No se pueden cargar los perfiles de actualización de software de macOS; vuelva a intentarlo más tarde.",
+ "lowercase": "Directiva de actualización de macOS",
+ "other": "Otro",
+ "subtitle": "Actualización de software de MacOS",
+ "upToDate": "Actualizado",
+ "uppercase": "Directiva de actualización de macOS"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Vuelva a intentarlo más tarde",
+ "title": "No se pudo eliminar {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Vuelva a intentarlo más tarde"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Vuelva a intentarlo más tarde",
+ "title": "Error al cargar {0}"
+ },
+ "idWrongFormat": "El identificador proporcionado para el perfil no tiene el formato esperado."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "Debe seleccionar al menos una ventana de tiempo.",
+ "tooMany": "Se puede configurar un máximo de 20 ventanas de tiempo."
+ }
+ },
+ "endDay": "Día de finalización",
+ "endTime": "Hora de finalización",
+ "startDay": "Día de inicio",
+ "startTime": "Hora de inicio",
+ "timeWindowError": "Elija una ventana de tiempo que abarque al menos una hora."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "No se pudieron cargar los perfiles de anillo de actualización para Windows 10 y versiones posteriores."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Anillo de actualización para Windows 10 y versiones posteriores",
+ "title": "Windows Update para empresas"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 y versiones posteriores",
+ "title": "Anillo de actualización para Windows 10 y versiones posteriores"
+ },
+ "listLoadError": "No se pueden cargar los perfiles de anillos de actualización para Windows 10 y versiones posteriores, inténtelo de nuevo más tarde.",
+ "lowercase": "Anillo de actualización",
+ "uppercase": "Anillo de actualización"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Actualizar configuración de directiva",
+ "updateRingSettings": "Configuración del anillo de actualización"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Crear {0}",
+ "edit": "Editar {0}"
+ }
+ },
+ "notScannedYet": "Todavía sin detectar",
+ "outOfDateIosDevices": "Dispositivos iOS no actualizados"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge, versión 77 y posteriores",
+ "storeApp": "Aplicación de la Tienda",
+ "office365Suite": "Aplicaciones de Microsoft 365",
+ "microsoftDefenderATP": "Microsoft Defender for Endpoint",
+ "other": "Otros",
+ "webApplication": "Aplicación web"
+ },
+ "Filters": {
+ "ruleSyntax": "Sintaxis de regla",
+ "filters": "Filtros"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Seleccione un script de detección.",
+ "scriptFileLabel": "Seleccione su script de detección"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Cuando se habilita, los dispositivos deben ser compatibles según las reglas personalizadas definidas en un archivo JSON en función de los datos personalizados devueltos por un script de PowerShell de detección.",
+ "label": "El Cumplimiento personalizado se ofrece actualmente en versión preliminar. Cuando esté disponible de manera general, podrá agregarla por un coste adicional a las opciones de licencia que incluyen Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Script",
+ "placeholder": "Hacer clic para seleccionar",
+ "searchboxPlaceholder": "Buscar por nombre de script",
+ "title": "Seleccionar un script de detección"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Resumen de reglas de cumplimiento personalizado"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Cargue y valide el archivo JSON con la configuración de cumplimiento personalizado",
+ "noFileSelectedError": "Seleccione un archivo JSON.",
+ "parseFileSelectedError": "El archivo JSON no es válido."
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Configure los requisitos de credenciales y PIN que los usuarios deben cumplir para acceder a las aplicaciones en un contexto de trabajo."
+ },
+ "DataProtection": {
+ "infoText": "Este grupo incluye controles de prevención de pérdida de datos (DLP), como restricciones para cortar, copiar, pegar y guardar como. Esta configuración determina la forma en la que los usuarios interactúan con los datos en las aplicaciones."
+ },
+ "DeviceTypes": {
+ "selectOne": "Seleccione al menos un tipo de dispositivo."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Destinar a aplicaciones en todos los tipos de dispositivo"
+ },
+ "infoText": "Elija cómo quiere aplicar esta directiva a las aplicaciones de otros dispositivos. Después, agregue al menos una aplicación.",
+ "selectOne": "Seleccione al menos una aplicación para crear una directiva."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender for Endpoint",
+ "androidDeviceOwnerApplications": "Aplicaciones",
+ "androidDeviceOwnerPolicyMessages": "Información de soporte técnico personalizada",
+ "androidForWorkPassword": "Contraseña del dispositivo",
+ "appManagement": "Permitir o bloquear aplicaciones",
+ "applicationGuard": "Protección de aplicaciones de Microsoft Defender",
+ "applicationRestrictions": "Aplicaciones restringidas",
+ "applicationVisibility": "Mostrar u ocultar aplicaciones",
+ "applications": "Tienda de aplicaciones",
+ "applicationsAndGames": "App Store, presentación de documentos, juegos",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Aplicaciones y experiencia",
+ "associatedDomains": "Dominios asociados",
+ "autonomousSingleAppMode": "Modo de aplicación única autónoma",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Cifrado de Windows",
+ "bootOptions": "Opciones de arranque",
+ "browser": "Explorador",
+ "builtinApps": "Aplicaciones integradas",
+ "cameras": "Cámaras",
+ "cellular": "Red de telefonía móvil",
+ "cloudAndStorage": "Nube y almacenamiento",
+ "cloudPrint": "Impresora en la nube",
+ "complianceEmailProfile": "Correo electrónico",
+ "connectedDevices": "Dispositivos conectados",
+ "connectivity": "Red de telefonía móvil y conectividad",
+ "contentCaching": "Almacenamiento en caché de contenido",
+ "controlPanelAndSettings": "Panel de control y Configuración",
+ "credentialGuard": "Credential Guard de Microsoft Defender",
+ "customCompliance": "Cumplimiento personalizado",
+ "customConfiguration": "Perfil de configuración personalizada",
+ "customOMASettings": "Configuración OMA-URI personalizada",
+ "customPreferences": "Archivo de preferencias",
+ "dFCISecuritySettings": "Configuración de seguridad",
+ "defender": "Antivirus de Microsoft Defender",
+ "defenderAntivirus": "Antivirus de Microsoft Defender",
+ "defenderExploitGuard": "Protección contra vulnerabilidades de seguridad de Microsoft Defender",
+ "defenderFirewall": "Firewall de Windows",
+ "defenderLocalSecurityOptions": "Opciones de seguridad del dispositivo local",
+ "defenderSecurityCenter": "Centro de seguridad de Microsoft Defender",
+ "deliveryOptimization": "Optimización de entrega",
+ "derivedCredentialAuthenticationConfiguration": "Credencial derivada",
+ "deviceExperience": "Experiencia del dispositivo",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Control de aplicaciones de Microsoft Defender",
+ "deviceHealth": "Estado de dispositivos",
+ "devicePassword": "Contraseña del dispositivo",
+ "deviceProperties": "Propiedades del dispositivo",
+ "deviceRestrictions": "General",
+ "deviceSecurity": "Seguridad del sistema",
+ "display": "Mostrar",
+ "domainJoin": "Unión a un dominio",
+ "domains": "Dominios",
+ "edgeBrowser": "Microsoft Edge (versión anterior), versión 45 y anteriores",
+ "edgeBrowserSmartScreen": "SmartScreen de Microsoft Defender",
+ "edgeKiosk": "Pantalla completa de Microsoft Edge",
+ "editionUpgrade": "Actualización de edición",
+ "education": "Educación",
+ "educationDeviceCerts": "Certificados de dispositivo",
+ "educationStudentCerts": "Certificados de alumno",
+ "educationTakeATest": "Hacer un examen",
+ "educationTeacherCerts": "Certificados de profesor",
+ "emailProfile": "Correo electrónico",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Extensión de aplicación de inicio de sesión único",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Juegos",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Seguimiento de estado",
+ "homeScreenLayout": "Diseño de pantalla principal",
+ "iOSWallpaper": "Papel tapiz",
+ "importedPFX": "Certificado PKCS importado",
+ "iosDefenderAtp": "Microsoft Defender for Endpoint",
+ "iosKiosk": "Pantalla completa",
+ "kernelExtensions": "Extensiones de kernel",
+ "keyboardAndDictionary": "Teclado y diccionario",
+ "kiosk": "Pantalla completa",
+ "kioskAndroidEnterprise": "Dispositivos dedicados",
+ "kioskConfiguration": "Pantalla completa",
+ "kioskConfigurationV2": "Pantalla completa",
+ "kioskWebBrowser": "Kiosk Web Browser",
+ "lockScreenMessage": "Mensaje de bloqueo de pantalla",
+ "lockedScreenExperience": "Experiencia de pantalla de bloqueo",
+ "logging": "Informes y telemetría",
+ "loginItems": "Elementos de inicio de sesión",
+ "loginWindow": "Ventana de inicio de sesión",
+ "macDefenderAtp": "Microsoft Defender for Endpoint",
+ "maintenance": "Mantenimiento",
+ "malware": "Malware",
+ "messaging": "Mensajería",
+ "microphonesAndSpeakers": "Micrófonos y altavoces",
+ "networkBoundary": "Límite de red",
+ "networkProxy": "Proxy de red",
+ "notifications": "Notificaciones de la aplicación",
+ "pKCS": "Certificado PKCS",
+ "password": "Contraseña",
+ "personalProfile": "Perfil personal",
+ "personalization": "Personalización",
+ "policyOverride": "Reemplazar la directiva de grupo",
+ "ports": "Puertos",
+ "powerSettings": "Opciones de energía",
+ "printer": "Impresora",
+ "privacy": "Privacidad",
+ "privacyPerApp": "Excepciones de privacidad por aplicación",
+ "privacyPreferences": "Preferencias de privacidad",
+ "projection": "Proyección",
+ "radios": "Radios",
+ "sCCMCompliance": "Cumplimiento de Configuration Manager",
+ "sCEP": "Certificado SCEP",
+ "sCEPProperties": "Certificado SCEP",
+ "sMode": "Intercambiar modo (solo Windows Insider)",
+ "safari": "Safari",
+ "search": "Buscar",
+ "session": "Sesión",
+ "sharedDevice": "iPad compartido",
+ "sharedPCAccountManager": "Dispositivo multiusuario compartido",
+ "singleSignOn": "Inicio de sesión único",
+ "smartScreen": "SmartScreen de Microsoft Defender",
+ "softwareUpdates": "Configuración",
+ "start": "Inicio",
+ "systemExtensions": "Extensiones del sistema",
+ "systemSecurity": "Seguridad del sistema",
+ "trustedCert": "Certificado de confianza",
+ "uEFIAccess": "Acceso a UEFI",
+ "updates": "Actualizaciones",
+ "userRights": "Derechos del usuario",
+ "usersAndAccounts": "Usuarios y cuentas",
+ "vPN": "VPN base",
+ "vPNApps": "VPN automática",
+ "vPNAppsAndTrafficRules": "Aplicaciones y reglas de tráfico",
+ "vPNConditionalAccess": "Acceso condicional",
+ "vPNConnectivity": "Conectividad",
+ "vPNDNSTriggers": "Configuración DNS",
+ "vPNIKEv2": "Configuración de IKEv2",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Túnel dividido",
+ "vPNTrustedNetwork": "Detección de redes de confianza",
+ "wakeSettings": "Configuración de reactivación",
+ "webContentFilter": "Filtro de contenido web",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender for Endpoint",
+ "windowsDefenderATP": "Microsoft Defender for Endpoint",
+ "windowsHelloForBusiness": "Windows Hello para empresas",
+ "windowsSpotlight": "Contenido destacado de Windows",
+ "wiredNetwork": "Red cableada",
+ "wireless": "Inalámbrica",
+ "wirelessProjection": "Proyección inalámbrica",
+ "workProfile": "Configuración del perfil profesional",
+ "workProfilePassword": "Contraseña del perfil de trabajo",
+ "xboxServices": "Servicios de Xbox",
+ "zebraMx": "Perfil de MX (solo Zebra)",
+ "complianceActionsLabel": "Acciones en caso de incumplimiento"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Direcciones URL permitidas",
+ "tooltip": "Especifique los sitios a los que los usuarios pueden acceder mientras están en su contexto de trabajo. No se permitirá ningún otro sitio. Puede elegir configurar una lista de sitios permitidos o bloqueados, pero no ambas."
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Proxy de aplicación",
+ "title": "Redirección de proxy de aplicación",
+ "tooltip": "Habilite la redirección de proxy de aplicación para dar acceso a los usuarios a los vínculos corporativos y a las aplicaciones web locales."
+ },
+ "BlockedURLs": {
+ "title": "URL bloqueadas",
+ "tooltip": "Especifique los sitios bloqueados para los usuarios mientras están en su contexto de trabajo. El resto de los sitios estarán permitidos. Puede elegir configurar una lista de sitios permitidos o bloqueados, pero no ambas. "
+ },
+ "Bookmarks": {
+ "header": "Marcadores administrados",
+ "tooltip": "Escriba una lista de direcciones URL marcadas que estén disponibles para los usuarios al utilizar Microsoft Edge en su contexto de trabajo.",
+ "uRL": "URL"
+ },
+ "HomepageURL": {
+ "header": "Página principal administrada",
+ "title": "Dirección URL de acceso directo a la página principal",
+ "tooltip": "Configure un acceso directo a la página principal que se mostrará a los usuarios como primer icono debajo de la barra de búsqueda cuando abran una pestaña nueva en Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Redirigir los sitios restringidos a un contexto personal",
+ "tooltip": "Configure si se debe permitir a los usuarios realizar la transición a su contexto personal para abrir sitios restringidos."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "SKU de Windows Home",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Seleccione el número de bits que contiene la clave.",
- "keyUsage": "Especifique la acción cifrada que es necesaria para el intercambio de la clave pública del certificado.",
- "renewalThreshold": "Especifique el porcentaje (entre uno y 99 por ciento) de duración restante del certificado que se permite antes de que un dispositivo pueda solicitar la renovación del certificado. La cantidad recomendada en Intune es el 20 %. (1 a 99)",
- "rootCert": "Elija un perfil de certificado de CA raíz previamente configurado y asignado. El certificado de CA debe coincidir con el certificado raíz de la CA que emite el certificado para este perfil (el que está configurando actualmente).",
- "scepServerUrl": "Escriba una dirección URL para el servidor NDES que emite certificados mediante SCEP (debe ser HTTPS). Por ejemplo, https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Agregar una o más direcciones URL para el servidor NDES que emite certificados mediante SCEP (debe ser HTTPS). Por ejemplo, https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Nombre alternativo del firmante",
- "subjectNameFormat": "Formato de nombre del firmante",
- "validityPeriod": "La cantidad de tiempo restante antes de que expire el certificado. Escriba un valor que sea igual o inferior al período de validez que se muestra en la plantilla de certificado. El valor predeterminado se establece en un año."
- },
- "appInstallContext": "Esta opción especifica el contexto de la instalación que se asociará a la aplicación. Para aplicaciones de modo dual, seleccione el contexto que quiere usar en esta aplicación. Para el resto de aplicaciones, esta opción se selecciona previamente según el paquete y no se puede modificar.",
- "autoUpdateMode": "Configure la prioridad de actualización de la aplicación. Seleccione Predeterminado para requerir que el dispositivo esté conectado a WiFi, que se cargue y que no se use activamente antes de actualizar la aplicación. Seleccione Prioridad alta para actualizar la aplicación tan pronto como el desarrollador haya publicado la aplicación, independientemente del estado de cargo, la funcionalidad WiFi o la actividad del usuario final en el dispositivo. Seleccione Pospuesto para impedir las actualizaciones de la aplicación durante un máximo de 90 días. La prioridad alta solo surtirá efecto en los dispositivos DO",
- "configurationSettingsFormat": "Texto de formato de opciones de configuración",
- "ignoreVersionDetection": "Establezca esta opción en \"Sí\" para las aplicaciones que el desarrollador propio actualiza automáticamente (por ejemplo, Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Seleccione \"Sí\" para las aplicaciones que el desarrollador de aplicaciones actualiza automáticamente o para comprobar solamente el valor bundleID de la aplicación antes de la instalación. Seleccione \"No\" para comprobar el número de versión y el valor bundleID de la aplicación antes de la instalación.",
- "installAsManagedMacOSLobApp": "Esta configuración solo se aplica a macOS 11 y versiones posteriores. La aplicación se instalará, pero no se administrará en macOS 10.15 y versiones anteriores.",
- "installContextDropdown": "Seleccione el contexto de instalación adecuado. En el contexto de usuario la aplicación se instala solo para el usuario de destino, mientras que en el contexto de dispositivo la aplicación se instala para todos los usuarios del dispositivo.",
- "ldapUrl": "Este es el nombre de host de LDAP en el que los clientes pueden obtener las claves de cifrado públicas para los destinatarios de correo electrónico. Los correos electrónicos se cifrarán cuando haya una clave disponible. Formatos admitidos:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Seleccione los permisos en tiempo de ejecución de la aplicación asociada.",
- "policyAssociatedApp": "Seleccione la aplicación a la que se asociará esta directiva.",
- "policyConfigurationSettings": "Seleccione el método que quiere usar para definir las opciones de configuración de esta directiva.",
- "policyDescription": "Opcionalmente, escriba una descripción para esta directiva de configuración.",
- "policyEnrollmentType": "Elija si esta configuración se administra a través de la administración de dispositivos o aplicaciones creadas con el SDK de Intune.",
- "policyName": "Escriba un nombre para esta directiva de configuración.",
- "policyPlatform": "Seleccione la plataforma a la que se aplicará esta directiva de configuración de aplicaciones.",
- "policyProfileType": "Seleccionar los tipos de perfil de dispositivo a los que se aplicará este perfil de configuración de la aplicación",
- "policySMime": "Configurar las opciones de cifrado y firma S/MIME para Outlook.",
- "sMimeDeployCertsFromIntune": "Especifique si se van a entregar o no certificados S/MIME de Intune para su uso con Outlook.\r\nIntune puede implementar automáticamente certificados de firma y cifrado para los usuarios a través del Portal de empresa.",
- "sMimeEnable": "Especificar si los controles S/MIME se habilitan o no al redactar un correo electrónico",
- "sMimeEnableAllowChange": "Especifique si el usuario tiene permiso para cambiar el valor Habilitar S/MIME.",
- "sMimeEncryptAllEmails": "Especifique si se deben cifrar o no todos los mensajes de correo electrónico.\r\nEl cifrado convierte los datos en texto cifrado para que solo el destinatario deseado pueda leerlos.",
- "sMimeEncryptAllEmailsAllowChange": "Especifique si el usuario tiene permiso para cambiar el valor Cifrar todos los correos electrónicos.",
- "sMimeEncryptionCertProfile": "Especifique el perfil de certificado para el cifrado de correo electrónico.",
- "sMimeSignAllEmails": "Especifique si se deben firmar o no todos los mensajes de correo electrónico.\r\nCon la firma digital se comprueba la autenticidad del correo electrónico y se garantiza que el contenido no se ha alterado en tránsito.",
- "sMimeSignAllEmailsAllowChange": "Especifique si el usuario tiene permiso para cambiar el valor Firmar todos los correos electrónicos.",
- "sMimeSigningCertProfile": "Especifique el perfil de certificado para la firma de correo electrónico.",
- "sMimeUserNotificationType": "Método para notificar a los usuarios que deben abrir el Portal de empresa a fin de recuperar los certificados S/MIME para Outlook."
- },
+ "Languages": {
+ "ar-aE": "Árabe (Emiratos Árabes Unidos)",
+ "ar-bH": "Árabe (Baréin)",
+ "ar-dZ": "Árabe (Argelia)",
+ "ar-eG": "Árabe (Egipto)",
+ "ar-iQ": "Árabe (Irak)",
+ "ar-jO": "Árabe (Jordania)",
+ "ar-kW": "Árabe (Kuwait)",
+ "ar-lB": "Árabe (Líbano)",
+ "ar-lY": "Árabe (Libia)",
+ "ar-mA": "Árabe (Marruecos)",
+ "ar-oM": "Árabe (Omán)",
+ "ar-qA": "Árabe (Qatar)",
+ "ar-sA": "Árabe (Arabia Saudí)",
+ "ar-sY": "Árabe (Siria)",
+ "ar-tN": "Árabe (Túnez)",
+ "ar-yE": "Árabe (Yemen)",
+ "az-cyrl": "Azerbaiyano (cirílico, Azerbaiyán)",
+ "az-latn": "Azerbaiyano (latino, Azerbaiyán)",
+ "bn-bD": "Bengalí (Bangladés)",
+ "bn-iN": "Bengalí (India)",
+ "bs-cyrl": "Bosnio (cirílico)",
+ "bs-latn": "Bosnio (latino)",
+ "zh-cN": "Chino (RPC)",
+ "zh-hK": "Chino (RAE de Hong Kong)",
+ "zh-mO": "Chino (RAE de Macao)",
+ "zh-sG": "Chino (Singapur)",
+ "zh-tW": "Chino (Taiwán)",
+ "hr-bA": "Croata (latino)",
+ "hr-hR": "Croata (Croacia)",
+ "nl-bE": "Neerlandés (Bélgica)",
+ "nl-nL": "Neerlandés (Países Bajos)",
+ "en-aU": "Inglés (Australia)",
+ "en-bZ": "Inglés (Belice)",
+ "en-cA": "Inglés (Canadá)",
+ "en-cabn": "Inglés (Caribe)",
+ "en-iE": "Inglés (Irlanda)",
+ "en-iN": "Inglés (India)",
+ "en-jM": "Inglés (Jamaica)",
+ "en-mY": "Inglés (Malasia)",
+ "en-nZ": "Inglés (Nueva Zelanda)",
+ "en-pH": "Inglés (Filipinas)",
+ "en-sG": "Inglés (Singapur)",
+ "en-tT": "Inglés (Trinidad y Tobago)",
+ "en-uK": "Inglés (Reino Unido)",
+ "en-uS": "Inglés (Estados Unidos)",
+ "en-zA": "Inglés (Sudáfrica)",
+ "en-zW": "Inglés (Zimbabue)",
+ "fr-bE": "Francés (Bélgica)",
+ "fr-cA": "Francés (Canadá)",
+ "fr-cH": "Francés (Suiza)",
+ "fr-fR": "Francés (Francia)",
+ "fr-lU": "Francés (Luxemburgo)",
+ "fr-mC": "Francés (Mónaco)",
+ "de-aT": "Alemán (Austria)",
+ "de-cH": "Alemán (Suiza)",
+ "de-dE": "Alemán (Alemania)",
+ "de-lI": "Alemán (Liechtenstein)",
+ "de-lU": "Alemán (Luxemburgo)",
+ "iu-cans": "Inuktitut (silábico, Canadá)",
+ "iu-latn": "Inuktitut (latino, Canadá)",
+ "it-cH": "Italiano (Suiza)",
+ "it-iT": "Italiano (Italia)",
+ "ms-bN": "Malayo (Brunéi Darussalam)",
+ "ms-mY": "Malayo (Malasia)",
+ "mn-cN": "Mongol (mongol tradicional, RPC)",
+ "mn-mN": "Mongol (cirílico, Mongolia)",
+ "no-nB": "Noruego (Bokmål, Noruega)",
+ "no-nn": "Noruego, Nynorsk (Noruega)",
+ "pt-bR": "Portugués (Brasil)",
+ "pt-pT": "Portugués (Portugal)",
+ "quz-bO": "Quechua (Bolivia)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Perú)",
+ "smj-nO": "Sami lule (Noruega)",
+ "smj-sE": "Sami lule (Suecia)",
+ "se-fI": "Sami, septentrional (Finlandia)",
+ "se-nO": "Sami, septentrional (Noruega)",
+ "se-sE": "Sami septentrional (Suecia)",
+ "sma-nO": "Sami, meridional (Noruega)",
+ "sma-sE": "Sami, meridional (Suecia)",
+ "smn": "Sami, inari (Finlandia)",
+ "sms": "Sami, skolt (Finlandia)",
+ "sr-Cyrl-bA": "Serbio (cirílico)",
+ "sr-Cyrl-rS": "Serbio (cirílico, antigua Serbia y Montenegro)",
+ "sr-Latn-bA": "Serbio (latino)",
+ "sr-Latn-rS": "Serbio (latino, Serbia)",
+ "dsb": "Bajo sorbio (Alemania)",
+ "hsb": "Alto sorbio (Alemania)",
+ "es-es-tradnl": "Español (España, alfabetización tradicional)",
+ "es-aR": "Español (Argentina)",
+ "es-bO": "Español (Bolivia)",
+ "es-cL": "Español (Chile)",
+ "es-cO": "Español (Colombia)",
+ "es-cR": "Español (Costa Rica)",
+ "es-dO": "Español (República Dominicana)",
+ "es-eC": "Español (Ecuador)",
+ "es-eS": "Español (España)",
+ "es-gT": "Español (Guatemala)",
+ "es-hN": "Español (Honduras)",
+ "es-mX": "Español (México)",
+ "es-nI": "Español (Nicaragua)",
+ "es-pA": "Español (Panamá)",
+ "es-pE": "Español (Perú)",
+ "es-pR": "Español (Puerto Rico)",
+ "es-pY": "Español (Paraguay)",
+ "es-sV": "Español (El Salvador)",
+ "es-uS": "Español (Estados Unidos)",
+ "es-uY": "Español (Uruguay)",
+ "es-vE": "Español (Venezuela)",
+ "sv-fI": "Sueco (Finlandia)",
+ "uz-cyrl": "Uzbeko (cirílico, Uzbekistán)",
+ "uz-latn": "Uzbeko (Latino, Uzbekistán)",
+ "af": "Afrikáans (Sudáfrica)",
+ "sq": "Albanés (Albania)",
+ "am": "Amárico (Etiopía)",
+ "hy": "Armenio (Armenia)",
+ "as": "Asamés (India)",
+ "ba": "Baskir (Rusia)",
+ "eu": "Euskera (euskera)",
+ "be": "Bielorruso (Belarús)",
+ "br": "Bretón (Francia)",
+ "bg": "Búlgaro (Bulgaria)",
+ "ca": "Catalán (Catalán)",
+ "co": "Corso (Francia)",
+ "cs": "Checo (República Checa)",
+ "da": "Danés (Dinamarca)",
+ "dv": "Divehi (Maldivas)",
+ "et": "Estonio (Estonia)",
+ "fo": "Feroés (Islas Feroe)",
+ "fil": "Filipino (Filipinas)",
+ "fi": "Finés (Finlandia)",
+ "gl": "Gallego (gallego)",
+ "ka": "Georgiano (Georgia)",
+ "el": "Griego (Grecia)",
+ "gu": "Guyaratí (India)",
+ "ha": "Hausa (latino, Nigeria)",
+ "he": "Hebreo (Israel)",
+ "hi": "Hindi (India)",
+ "hu": "Húngaro (Hungría)",
+ "is": "Islandés (Islandia)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonesio (Indonesia)",
+ "ga": "Irlandés (Irlanda)",
+ "xh": "Xhosa (Sudáfrica)",
+ "zu": "Zulú (Sudáfrica)",
+ "ja": "Japonés (Japón)",
+ "kn": "Canarés (India)",
+ "kk": "Kazajo (Kazajistán)",
+ "km": "Jemer (Camboya)",
+ "rw": "Kinyarwanda (Ruanda)",
+ "sw": "Suajili (Kenia)",
+ "kok": "Konkani (India)",
+ "ko": "Coreano (Corea del Sur)",
+ "ky": "Kirguís (Kirguistán)",
+ "lo": "Lao (R.D.P. de Laos)",
+ "lv": "Letón (Letonia)",
+ "lt": "Lituano (Lituania)",
+ "lb": "Luxemburgués (Luxemburgo)",
+ "mk": "Macedonio (Macedonia del Norte)",
+ "ml": "Malayálam (India)",
+ "mt": "Maltés (Malta)",
+ "mi": "Maorí (Nueva Zelanda)",
+ "mr": "Maratí (India)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepalí (Nepal)",
+ "oc": "Occitano (Francia)",
+ "or": "Odia (India)",
+ "ps": "Pastún (Afganistán)",
+ "fa": "Persa",
+ "pl": "Polaco (Polonia)",
+ "pa": "Punyabí (India)",
+ "ro": "Rumano (Rumanía)",
+ "rm": "Romanche (Suiza)",
+ "ru": "Ruso (Rusia)",
+ "sa": "Sánscrito (India)",
+ "st": "Sotho septentrional (Sudáfrica)",
+ "tn": "Setsuana (Sudáfrica)",
+ "si": "Cingalés (Sri Lanka)",
+ "sk": "Eslovaco (Eslovaquia)",
+ "sl": "Esloveno (Eslovenia)",
+ "sv": "Sueco (Suecia)",
+ "syr": "Sirio (Siria)",
+ "tg": "Tayiko (cirílico, Tayikistán)",
+ "ta": "Tamil (India)",
+ "tt": "Tártaro (Rusia)",
+ "te": "Telugu (India)",
+ "th": "Tailandés (Tailandia)",
+ "bo": "Tibetano (RPC)",
+ "tr": "Turco (Turquía)",
+ "tk": "Turcomano (Turkmenistán)",
+ "uk": "Ucraniano (Ucrania)",
+ "ur": "Urdú (Pakistán)",
+ "vi": "Vietnamita (Vietnam)",
+ "cy": "Galés (Reino Unido)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (RPC)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Rol integrado",
+ "customCloudPCRole": "Rol personalizado de Windows 365",
+ "customIntuneRole": "Rol personalizado de Intune",
+ "customRole": "Rol personalizado"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "Versión de la aplicación",
+ "dependencyName": "Nombre de la dependencia",
+ "lastModifiedTime": "Hora de la última modificación",
+ "relationship": "Relación",
+ "replaced": "Reemplazado",
+ "searchPlaceholder": "Filtrar por nombre de aplicación",
+ "status": "Detalles del estado",
+ "statusDetails": "Estado",
+ "supersedenceName": "Nombre de sustitución"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Dependencia secundaria",
+ "indirectSupersedence": "No relacionado directamente",
+ "supersedenceAncestors": "Sustituir",
+ "supersedenceDescendants": "Se reemplazó"
+ },
+ "SupersededReplaced": {
+ "no": "No",
+ "yes": "Sí"
+ },
+ "Tabs": {
+ "chart": "Gráfico",
+ "dependency": "Dependencia",
+ "label": "Ver: ",
+ "supersedence": "Sustitución",
+ "table": "Tabla"
+ },
+ "dependencyGraphAriaLabel": "Gráfico de dependencias de aplicación",
+ "supersedenceGraphAriaLabel": "Gráfico de sustitución de aplicaciones"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Número de días que debe esperarse antes de aplicar el reinicio"
+ },
+ "Description": {
+ "label": "Descripción"
+ },
+ "Name": {
+ "label": "Nombre"
+ },
+ "QualityUpdateRelease": {
+ "label": "Acelere la instalación de las actualizaciones de calidad si la versión del sistema operativo del dispositivo es anterior a:"
+ },
+ "bladeTitle": "Actualizaciones de calidad para Windows 10 y versiones posteriores (versión preliminar)",
+ "loadError": "Error al cargar."
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Configuración"
+ },
+ "infoBoxText": "El único control de actualización de calidad dedicado disponible, aparte de la directiva de anillos de actualización de Windows 10 y posteriores, es la capacidad de acelerar las actualizaciones de calidad de los dispositivos que se encuentran en un nivel de revisión especificado. Habrá controles adicionales disponibles en el futuro.",
+ "licenseLearnMoreText": "Obtener más información sobre los requisitos previos y las directivas de actualización de calidad.",
+ "licenseWarningBoxText": "La creación de directivas de actualización de calidad requiere licencias específicas.",
+ "warningBoxText": "Aunque acelerar las actualizaciones de software puede ayudar a reducir el tiempo necesario para lograr el cumplimiento, su impacto en la productividad del usuario final es mayor. Las posibilidades de experimentar un reinicio durante el horario laboral aumentan considerablemente."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "En Android, puede permitir el uso de la identificación de huellas digitales en lugar de un PIN. Se pide a los usuarios que proporcionen sus huellas digitales cuando acceden a esta aplicación con sus cuentas profesionales.",
+ "iOS": "En el caso de los dispositivos iOS/iPadOS, puede permitir la identificación mediante una huella digital, en lugar de con un PIN. Cuando el usuario intente acceder a la aplicación con su cuenta profesional, se le solicitará que proporcione su huella digital.",
+ "mac": "En el caso de los dispositivos Mac, puede permitir la identificación mediante una huella digital, en lugar de con un PIN. Cuando el usuario intente acceder a la aplicación con su cuenta profesional, se le solicitará que proporcione su huella digital."
+ },
+ "allowWidgetContentSync": "Elija Bloquear para impedir que las aplicaciones administradas por directivas guarden datos en widgets de aplicación. Si elige Permitir, la aplicación administrada por directivas puede guardar datos en widgets de aplicación, si esas características se admiten y habilitan dentro de la aplicación administrada por directivas. \r\n\r\n \r\n\r\nLas aplicaciones pueden proporcionar capacidad de configuración adicional con directivas de configuración de aplicaciones. Para más información, consulte la documentación de la aplicación.",
+ "appSharingFromLevel1": "Seleccione una de las opciones siguientes para especificar las aplicaciones de las que esta aplicación puede recibir datos:",
+ "appSharingFromLevel2": "{0}: Permitir solo la recepción de datos de otras aplicaciones administradas por directivas en las cuentas o documentos de la organización",
+ "appSharingFromLevel3": "{0}: Permitir la recepción de datos de cualquier aplicación en las cuentas o documentos de la organización",
+ "appSharingFromLevel4": "{0}: No permitir la recepción de datos de ninguna aplicación en las cuentas o documentos de la organización",
+ "appSharingFromLevel5": "{0}: permitir la transferencia de datos desde cualquier aplicación y tratar todos los datos entrantes que no tengan una identidad de usuario como datos de la organización.",
+ "appSharingToLevel1": "Seleccione una de las opciones siguientes para especificar las aplicaciones a las que esta aplicación puede enviar datos:",
+ "appSharingToLevel2": "{0}: Permitir solo el envío de datos de la organización a otras aplicaciones administradas por directivas",
+ "appSharingToLevel3": "{0}: Permitir el envío de datos de la organización a cualquier aplicación",
+ "appSharingToLevel4": "{0}: No permitir el envío de datos de la organización a ninguna aplicación",
+ "appSharingToLevel5": "{0}: permitir solo la transferencia a otras aplicaciones administradas por directivas y la transferencia de archivos a otras aplicaciones administradas por MDM en los dispositivos inscritos.",
+ "appSharingToLevel6": "{0}: permitir solo la transferencia a otras aplicaciones administradas por directivas y filtrar los cuadros de diálogo Abrir en/Compartir del sistema operativo para que solo muestren aplicaciones de este tipo.",
+ "assignmentFilterEdit1": "Si aplica filtros de asignación a esta directiva, se aplicará la propiedad \"Tipo de administración de dispositivos\" además de los valores especificados para \"Destino a aplicaciones en todos los tipos de dispositivo\" y \"Tipos de dispositivo\" en la página \"Aplicaciones\".",
+ "assignmentFilterEdit2": "Obtenga más información sobre la asignación de directivas de protección de aplicaciones.",
+ "conditionalEncryption1": "Seleccione {0} para deshabilitar el cifrado de aplicaciones para el almacenamiento interno de aplicaciones cuando se detecte el cifrado de dispositivos en un dispositivo inscrito.",
+ "conditionalEncryption2": "Nota: Intune solo puede detectar la inscripción de dispositivos con MDM de Intune. El almacenamiento externo de aplicaciones seguirá siendo cifrado para garantizar que aplicaciones sin administrar puedan acceder a los datos.",
+ "contactSyncMac": "Si esta opción está deshabilitada, las aplicaciones no pueden guardar contactos en la libreta de direcciones nativa.",
+ "contactsSync": "Elija Bloquear para impedir que las aplicaciones administradas por directivas guarden datos en las aplicaciones nativas del dispositivo (como Contactos, Calendario y widgets) o para impedir el uso de complementos dentro de las aplicaciones administradas por directivas. Si elige Permitir, la aplicación administrada por directivas puede guardar datos en las aplicaciones nativas o usar complementos, si esas características se admiten y habilitan en la aplicación administrada por directivas.
Las aplicaciones pueden proporcionar capacidad de configuración adicional con directivas de configuración de aplicaciones. Para obtener más información, consulte la documentación de la aplicación.",
+ "deviceTypeTargetingCreate1": "La selección de destino del tipo de dispositivo se ha movido al paso Asignaciones en la creación de directivas.",
+ "deviceTypeTargetingEdit1": "Si aplica filtros de asignación a esta directiva, se aplicará la propiedad \"Tipo de administración de dispositivos\" además de los valores especificados para \"Destino a aplicaciones en todos los tipos de dispositivo\" y \"Tipos de dispositivo\" en la página \"Aplicaciones\".",
+ "deviceTypeTargetingEdit2": "Para editar la asignación de tipos de administración de dispositivos, restablezca \"Destino a aplicaciones en todos los tipos de dispositivos\" = \"Sí\". Luego, cree un filtro de asignación MAM con los valores deseados para \"Tipo de administración de dispositivos\".",
+ "deviceTypeTargetingHasMoved": "Más información sobre la asignación de directivas de protección de aplicaciones",
+ "encryptionAndroid1": "En el caso de las aplicaciones asociadas a una directiva de administración de aplicaciones móviles de Intune, el cifrado lo proporciona Microsoft. Los datos se cifran de forma sincrónica durante las operaciones de E/S de archivos, de acuerdo con la configuración de la directiva de administración de aplicaciones móviles. Las aplicaciones administradas en Android usan el cifrado AES-128 en modo CBC mediante las bibliotecas de criptografía de plataformas. El método de cifrado no es compatible con FIPS 140-2. El cifrado SHA-256 se admite como instrucción explícita mediante el parámetro SigAlg y solo funcionará en dispositivos con la versión 4.2 y posteriores. El contenido del almacenamiento del dispositivo siempre estará cifrado.",
+ "encryptionAndroid2": "Si solicita el cifrado en la directiva de aplicación, se le solicitará al usuario final que configure y use un PIN para acceder al dispositivo. Si no hay un PIN configurado para acceder al dispositivo, las aplicaciones no se iniciarán y, en su lugar, el usuario final verá el mensaje siguiente: \\\"La compañía ha requerido que primero debe habilitar un PIN de dispositivo para tener acceso a esta aplicación\\\".",
+ "encryptionMac1": "En el caso de las aplicaciones asociadas a una directiva de administración de aplicaciones móviles de Intune, el cifrado lo proporciona Microsoft. Los datos se cifran de forma sincrónica durante las operaciones de E/S de archivos de acuerdo con la configuración de la directiva de administración de aplicaciones móviles. Las aplicaciones administradas en Mac usan el cifrado AES-128 en modo CBC mediante las bibliotecas de criptografía de plataformas. El método de cifrado no es compatible con FIPS 140-2. El cifrado SHA-256 se admite como instrucción explícita mediante el parámetro SigAlg y solo funcionará en dispositivos con la versión 4.2 y posteriores. El contenido del almacenamiento del dispositivo siempre estará cifrado.",
+ "faceId1": "Cuando proceda, puede permitir el uso de la identificación de caras en lugar de un PIN. Se pide a los usuarios que proporcionen identificación de caras al acceder a esta aplicación con sus cuentas profesionales.",
+ "faceId2": "Seleccione Sí para permitir la identificación de caras en lugar de usar un PIN para el acceso a la aplicación.",
+ "managementLevelsAndroid1": "Use esta opción para especificar si la directiva se aplica a los dispositivos del administrador de dispositivos Android, a los dispositivos Android Enterprise o a los dispositivos no administrados.",
+ "managementLevelsAndroid2": "{0}: los dispositivos no administrados son aquellos en los que no se ha detectado la administración MDM de Intune. Esto incluye a los proveedores de MDM de terceros.",
+ "managementLevelsAndroid3": "{0}: dispositivos administrados por Intune que usan la API de administración de dispositivos Android.",
+ "managementLevelsAndroid4": "{0}: dispositivos administrados por Intune que usan perfiles de trabajo de Android Enterprise o la administración de dispositivos completa de Android Enterprise.",
+ "managementLevelsIos1": "Use esta opción para especificar si la directiva se aplica a los dispositivos administrados por MDM o a dispositivos no administrados.",
+ "managementLevelsIos2": "{0}: los dispositivos no administrados son aquellos en los que no se ha detectado la administración MDM de Intune. Esto incluye a los proveedores de MDM de terceros.",
+ "managementLevelsIos3": "{0}: MDM de Intune administra los dispositivos administrados.",
+ "minAppVersion": "Defina el número de versión mínimo de la aplicación que debe tener un usuario para obtener acceso seguro a ella.",
+ "minAppVersionWarning": "Defina el número de versión mínimo recomendado de la aplicación que debe tener un usuario para el acceso seguro a ella.",
+ "minOsVersion": "Defina el número de versión mínimo necesario del sistema operativo que debe tener un usuario para obtener acceso seguro a la aplicación.",
+ "minOsVersionWarning": "Defina el número de versión mínimo recomendado del sistema operativo que debe tener un usuario para obtener acceso seguro a la aplicación.",
+ "minPatchVersion": "Defina el nivel de revisión de seguridad Android más antiguo requerido que el usuario puede tener para conseguir acceso seguro a la aplicación.",
+ "minPatchVersionWarning": "Defina el nivel de revisión de seguridad Android recomendado más antiguo que el usuario puede tener para obtener acceso seguro a la aplicación.",
+ "minSdkVersion": "Defina la versión mínima necesaria del SDK de la directiva de protección de aplicaciones de Intune que debe tener un usuario para obtener acceso seguro a la aplicación.",
+ "requireAppPinDefault": "
Seleccione Sí para deshabilitar el PIN de la aplicación cuando se detecte un bloqueo de dispositivo en un dispositivo inscrito.
",
+ "targetAllApps1": "Use esta opción para destinar la directiva a aplicaciones en dispositivos con cualquier estado de administración.",
+ "targetAllApps2": "Esta configuración se reemplaza durante la resolución de conflictos de directivas si un usuario tiene una directiva destinada a un estado de administración específico.",
+ "touchId2": "Seleccione {0} para requerir una huella digital para la identificación y el acceso a la aplicación, en lugar de un PIN."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Especifique el número de días que deben transcurrir antes de que el usuario deba restablecer el PIN.",
+ "previousPinBlockCount": "Esta configuración especifica el número de PIN anteriores que Intune va a conservar. Todo PIN nuevo debe ser distinto de los que Intune conserva."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Esto permite que Windows Search continúe la búsqueda en los datos cifrados.",
+ "authoritativeIpRanges": "Habilite esta configuración si quiere invalidar la detección automática de intervalos IP de Windows.",
+ "authoritativeProxyServers": "Habilite esta configuración si quiere invalidar la detección automática de servidores proxy de Windows.",
+ "checkInput": "Comprobar la validez de las entradas",
+ "dataRecoveryCert": "Un certificado de recuperación es un certificado del Sistema de cifrado de archivos (EFS) que se puede usar para recuperar archivos cifrados si la clave de cifrado se pierde o se daña. Debe crear el certificado de recuperación y especificarlo aquí. Encontrará más información aquí",
+ "enterpriseCloudResources": "
Especifique recursos de nube para tratarlos como corporativos y protegerlos con la directiva Windows Information Protection. Se pueden especificar varios recursos separados con el carácter \\\"|\\\".
Si tiene un proxy configurado en la empresa, puede especificar el proxy a través del cual se dirigirá el tráfico hacia los recursos de nube especificados.
URL[,Proxy]|URL[,Proxy]
Sin proxy: contoso.sharepoint.com|contoso.visualstudio.com Con proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Especifique los intervalos IPv4 que conforman su red corporativa. Estos intervalos se usan junto con los nombres de dominio de la red empresarial para definir los límites de su red corporativa.
Esta configuración es necesaria para tener Windows Information Protection habilitado.
Se pueden especificar varios intervalos separados por comas.
Por ejemplo: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
+ "enterpriseIPv6Ranges": "
Especifique los intervalos IPv6 que conforman su red corporativa. Estos intervalos se usan junto con los nombres de dominio de la red empresarial que especifique para definir los límites de su red corporativa.
Se pueden especificar varios intervalos separados por comas.
Por ejemplo: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
+ "enterpriseInternalProxyServers": "
Si tiene un proxy configurado en su compañía, puede especificar el proxy a través del cual debe dirigirse el tráfico hacia los recursos de nube especificados en la configuración de Recursos de Enterprise Cloud.
Se pueden especificar varios valores separados con punto y coma.
Por ejemplo: contoso.internalproxy1.com;contoso.internalproxy2.com
",
+ "enterpriseNetworkDomainNames": "
Especifique los nombres DNS que conforman su red corporativa. Estos nombres se usan junto con los intervalos IP que especifique para definir los límites de su red corporativa. Se pueden especificar varios valores separados por comas.
Esta configuración es necesaria para tener Windows Information Protection habilitado.
Por ejemplo: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Especifique los nombres DNS que conforman su red corporativa. Estos nombres se usan con los intervalos de IP que especifique para definir los límites de su red corporativa. Se pueden especificar varios valores separados por \\\"|\\\".
Esta configuración es necesaria para habilitar Windows Information Protection.
Por ejemplo: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
Si tiene servidores proxy externos en la red corporativa, especifíquelos aquí. Cuando especifique una dirección de servidor proxy, debe especificar también el puerto a través del cual debe permitirse y protegerse el tráfico con Windows Information Protection.
Nota: Esta lista no debe incluir servidores de la lista de servidores proxy internos de la empresa. Se pueden especificar varios valores separados con punto y coma.
Por ejemplo: proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "Especifica el tiempo máximo permitido (en minutos) que debe transcurrir con el dispositivo inactivo para que este se bloquee mediante PIN o contraseña. Los usuarios pueden seleccionar cualquier valor existente inferior al tiempo máximo especificado en la aplicación Configuración. Tenga en cuenta que Lumia 950 y 950XL tienen un valor de tiempo de espera máximo de cinco minutos, independientemente del valor establecido por esta directiva.",
+ "maxInactivityTime2": "0 (valor predeterminado): no se define el tiempo de espera. El valor predeterminado \\\"0\\\" se interpreta como \\\"Tiempo de espera no definido\\\".",
+ "maxPasswordAttempts1": "Esta directiva tiene comportamientos diferentes para los dispositivos móviles y de escritorio.",
+ "maxPasswordAttempts2": "En el dispositivo móvil, cuando el usuario alcanza el valor establecido por la directiva, se borran los datos.",
+ "maxPasswordAttempts3": "Cuando el usuario alcanza el valor establecido por esta directiva en un dispositivo de escritorio, este no se borra. En su lugar, se aplica el modo de recuperación de BitLocker, con el que los datos son inaccesibles pero recuperables. Si BitLocker no está habilitado, la directiva no puede aplicarse.",
+ "maxPasswordAttempts4": "Antes de alcanzar el límite de intentos erróneos, se envía al usuario a la pantalla de bloqueo y se le avisa de que, en caso de más intentos incorrectos, el equipo se bloqueará. Cuando el usuario alcanza el límite, el dispositivo se reinicia automáticamente y muestra la página de recuperación de BitLocker, donde se pide al usuario la clave de recuperación de BitLocker.",
+ "maxPasswordAttempts5": "0 (valor predeterminado): el dispositivo no se borra nunca después de especificarse un PIN o una contraseña incorrectos.",
+ "maxPasswordAttempts6": "El valor más seguro es 0 si todos los valores de la directiva = 0. En caso contrario, el valor más seguro es el valor mínimo de la directiva.",
+ "mdmDiscoveryUrl": "Especifique la dirección URL del punto de conexión de inscripción de MDM para los usuarios que se inscriban en MDM. De forma predeterminada, se especifica para Intune.",
+ "minimumPinLength1": "Valor entero que establece el número mínimo de caracteres requeridos para el PIN. El valor predeterminado es 4. El número más bajo que se puede establecer para esta configuración de directiva es 4. El número más alto que se puede establecer debe ser menor que el número establecido en la configuración de directiva Longitud máxima del PIN o 127, el que sea más bajo.",
+ "minimumPinLength2": "Si define esta configuración de directiva, la longitud del PIN debe ser mayor que o igual a este número. Si la deshabilita o no la configura, entonces la longitud debe ser mayor que o igual a 4.",
+ "name": "Nombre del límite de esta red",
+ "neutralResources": "
Si tiene puntos de conexión de redireccionamiento de autenticación en la compañía, especifíquelos aquí. Las ubicaciones que especifique aquí se consideran personales o corporativas en función del contexto de la conexión antes del redireccionamiento.
Se pueden especificar varios valores separados por comas.
Por ejemplo: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Valor que establece Windows Hello para empresas como método para iniciar sesión en Windows.",
+ "passportForWork2": "Si establece esta directiva en falso, el usuario no podrá aprovisionar Windows Hello para empresas, excepto en los teléfonos móviles Microsoft Entra se hayan unido en los que se requiera el aprovisionamiento.",
+ "pinExpiration": "El número máximo que se puede establecer para esta configuración de directiva es 730 y el número mínimo es 0. Si la directiva se establece en 0, el PIN del usuario no expirará nunca.",
+ "pinHistory1": "El número máximo que se puede establecer para esta configuración de directiva es 50 y el número mínimo es 0. Si la directiva se establece en 0, no se requiere el almacenamiento de los PIN anteriores.",
+ "pinHistory2": "El PIN actual del usuario se incluye en el conjunto de los PIN asociados a su cuenta. En caso de restablecimiento de los PIN, el historial correspondiente no se conserva.",
+ "protectUnderLock": "Protege el contenido de la aplicación mientras el dispositivo está en estado bloqueado.",
+ "protectionModeBlock": "
Bloquear: impide que los datos de empresa salgan de las aplicaciones protegidas.
",
+ "protectionModeOff": "
Desactivado: el usuario puede reubicar datos fuera de las aplicaciones protegidas. No se registra ninguna acción.
",
+ "protectionModeOverride": "
Permitir invalidaciones: se pide confirmación al usuario cuando intenta reubicar datos de una aplicación protegida en otra no protegida. Si decide invalidar este mensaje, la acción se registra.
",
+ "protectionModeSilent": "
Silencio: el usuario puede reubicar datos fuera de las aplicaciones protegidas. Estas acciones se registran.
",
+ "required": "Requerido",
+ "revokeOnMdmHandoff": "Agregada en Windows 10, versión 1703. Esta directiva controla si se revocarán las claves WIP cuando un dispositivo se actualice de MAM a MDM. Si está establecida en \\\"Desactivada\\\", las claves no se revocarán y el usuario seguirá teniendo acceso a los archivos protegidos después de la actualización. Esta es la opción recomendada si el servicio MDM está configurado con el mismo elemento EnterpriseID de WIP que el servicio MAM.",
+ "revokeOnUnenroll": "Esto hará que las claves de cifrado se revoquen al anularse la inscripción de un dispositivo en esta directiva.",
+ "rmsTemplateForEdp": "GUID de TemplateID que se va a usar para el cifrado RMS. La plantilla de Azure RMS permite al administrador de TI configurar quién tiene acceso al archivo protegido por RMS y durante cuánto tiempo.",
+ "showWipIcon": "Esto permitirá que el usuario sepa cuando se actúa en un contexto corporativo, mediante la superposición de un icono.",
+ "useRmsForWip": "Especifica si se permite el cifrado de Azure RMS para WIP."
+ },
+ "requireAppPin": "
Seleccione la opción Sí para deshabilitar el PIN de aplicación cuando se detecte un bloqueo de dispositivo en un dispositivo inscrito.
Nota: Intune no puede detectar la inscripción de dispositivos con una solución EMM de terceros en iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Crear un script personalizado",
+ "edit": "Editar script personalizado"
+ },
+ "basicInfo": "Cree un paquete de scripts personalizado a partir de los scripts de detección y corrección que ha escrito.",
+ "customScriptCapitalized": "Script personalizado",
+ "customScriptLowercase": "script personalizado",
+ "detectionScript": "Script de detección"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Predeterminado",
+ "header": "Prioridad de actualización",
+ "postponed": "Pospuesto",
+ "priority": "Prioridad alta"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Actualizar automáticamente",
+ "sublabel": "Si el usuario ha instalado aplicaciones que se han sustituido desde el Portal de empresa, es necesario instalar la aplicación de sustitución."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Fondo",
+ "displayText": "Descarga de contenido en {0}",
+ "foreground": "Primer plano",
+ "header": "Prioridad de optimización de distribución"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Permitir al usuario posponer la notificación de reinicio",
+ "countdownDialog": "Seleccionar cuándo debe mostrarse el cuadro de diálogo de cuenta regresiva de reinicio antes de producirse el reinicio (minutos)",
+ "durationInMinutes": "Período de gracia de reinicio del dispositivo (minutos)",
+ "snoozeDurationInMinutes": "Seleccionar la duración del aplazamiento (minutos)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Zona horaria",
+ "local": "Zona horaria del dispositivo",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Fecha y hora",
+ "deadlineTimeColumnLabel": "Fecha límite de instalación",
+ "deadlineTimeDatePickerErrorMessage": "La fecha seleccionada debe ser posterior a la fecha de disponibilidad.",
+ "deadlineTimeLabel": "Fecha límite de instalación de la aplicación",
+ "defaultTime": "Lo antes posible",
+ "infoText": "Esta aplicación estará disponible tan pronto como se haya implementado, a menos que especifique un tiempo de disponibilidad a continuación. Si se trata de una aplicación necesaria, puede especificar la fecha límite de instalación.",
+ "specificTime": "Fecha y hora específicas",
+ "startTimeColumnLabel": "Disponibilidad",
+ "startTimeDatePickerErrorMessage": "La fecha seleccionada debe ser anterior a la fecha límite.",
+ "startTimeLabel": "Disponibilidad de la aplicación"
+ },
+ "restartGracePeriodHeader": "Período de gracia de reinicio",
+ "restartGracePeriodLabel": "Período de gracia de reinicio del dispositivo",
+ "summaryTitle": "Experiencia del usuario final"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Asigne un atributo personalizado al menos a un grupo. Vaya a Propiedades para editar las asignaciones.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Script de shell",
"successfullySavedPolicy": "Se guardó {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64 bits",
+ "thirtyTwoBit": "32 bits"
+ },
+ "Countries": {
+ "ae": "Emiratos Árabes Unidos",
+ "ag": "Antigua y Barbuda",
+ "ai": "Anguila",
+ "al": "Albania",
+ "am": "Armenia",
+ "ao": "Angola",
+ "ar": "Argentina",
+ "at": "Austria",
+ "au": "Australia",
+ "az": "Azerbaiyán",
+ "bb": "Barbados",
+ "be": "Bélgica",
+ "bf": "Burkina Faso",
+ "bg": "Bulgaria",
+ "bh": "Baréin",
+ "bj": "Benín",
+ "bm": "Bermudas",
+ "bn": "Brunéi",
+ "bo": "Bolivia",
+ "br": "Brasil",
+ "bs": "Bahamas",
+ "bt": "Bután",
+ "bw": "Botsuana",
+ "by": "Belarús",
+ "bz": "Belice",
+ "ca": "Canadá",
+ "cg": "República del Congo",
+ "ch": "Suiza",
+ "cl": "Chile",
+ "cn": "China",
+ "co": "Colombia",
+ "cr": "Costa Rica",
+ "cv": "Cabo Verde",
+ "cy": "Chipre",
+ "cz": "República Checa",
+ "de": "Alemania",
+ "dk": "Dinamarca",
+ "dm": "Dominica",
+ "do": "República Dominicana",
+ "dz": "Argelia",
+ "ec": "Ecuador",
+ "ee": "Estonia",
+ "eg": "Egipto",
+ "es": "España",
+ "fi": "Finlandia",
+ "fj": "Fiyi",
+ "fm": "Estados Federados de Micronesia",
+ "fr": "Francia",
+ "gb": "Reino Unido",
+ "gd": "Granada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Grecia",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hong Kong",
+ "hn": "Honduras",
+ "hr": "Croacia",
+ "hu": "Hungría",
+ "id": "Indonesia",
+ "ie": "Irlanda",
+ "il": "Israel",
+ "in": "India",
+ "is": "Islandia",
+ "it": "Italia",
+ "jm": "Jamaica",
+ "jo": "Jordania",
+ "jp": "Japón",
+ "ke": "Kenia",
+ "kg": "Kirguistán",
+ "kh": "Camboya",
+ "kn": "San Cristóbal y Nieves",
+ "kr": "República de Corea",
+ "kw": "Kuwait",
+ "ky": "Islas Caimán",
+ "kz": "Kazajistán",
+ "la": "República Democrática Popular de Laos",
+ "lb": "Líbano",
+ "lc": "Santa Lucía",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Lituania",
+ "lu": "Luxemburgo",
+ "lv": "Letonia",
+ "md": "República de Moldova",
+ "mg": "Madagascar",
+ "mk": "Macedonia del Norte",
+ "ml": "Malí",
+ "mn": "Mongolia",
+ "mo": "Macao",
+ "mr": "Mauritania",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauricio",
+ "mw": "Malaui",
+ "mx": "México",
+ "my": "Malasia",
+ "mz": "Mozambique",
+ "na": "Namibia",
+ "ne": "Níger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Países Bajos",
+ "no": "Noruega",
+ "np": "Nepal",
+ "nz": "Nueva Zelanda",
+ "om": "Omán",
+ "pa": "Panamá",
+ "pe": "Perú",
+ "pg": "Papúa Nueva Guinea",
+ "ph": "Filipinas",
+ "pk": "Pakistán",
+ "pl": "Polonia",
+ "pt": "Portugal",
+ "pw": "Palaos",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Rumanía",
+ "ru": "Rusia",
+ "sa": "Arabia Saudí",
+ "sb": "Islas Salomón",
+ "sc": "Seychelles",
+ "se": "Suecia",
+ "sg": "Singapur",
+ "si": "Eslovenia",
+ "sk": "Eslovaquia",
+ "sl": "Sierra Leona",
+ "sn": "Senegal",
+ "sr": "Surinam",
+ "st": "Santo Tomé y Príncipe",
+ "sv": "El Salvador",
+ "sz": "Suazilandia",
+ "tc": "Islas Turcas y Caicos",
+ "td": "Chad",
+ "th": "Tailandia",
+ "tj": "Tayikistán",
+ "tm": "Turkmenistán",
+ "tn": "Túnez",
+ "tr": "Turquía",
+ "tt": "Trinidad y Tobago",
+ "tw": "Taiwán",
+ "tz": "Tanzania",
+ "ua": "Ucrania",
+ "ug": "Uganda",
+ "us": "Estados Unidos",
+ "uy": "Uruguay",
+ "uz": "Uzbekistán",
+ "vc": "San Vicente y las Granadinas",
+ "ve": "Venezuela",
+ "vg": "Islas Vírgenes Británicas",
+ "vn": "Vietnam",
+ "ye": "Yemen",
+ "za": "Sudáfrica",
+ "zw": "Zimbabue"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Este valor no se puede configurar a través de OMA-URI, ya que está disponible en el catálogo de configuración. Vaya al catálogo de configuración para configurar este valor."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Seleccionar un archivo de perfil de configuración"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Esta configuración funciona para los dispositivos inscritos con o sin aprobación del usuario a través de la inscripción de dispositivos y para los dispositivos inscritos con la inscripción de dispositivo automatizada (anteriormente DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Inscripción de dispositivos e inscripción de dispositivos automatizada",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Inscripción de dispositivos e inscripción de dispositivos automatizada",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Configure Microsoft Launcher en los dispositivos totalmente administrados.",
+ "deviceExperienceTypeDescription": "En función de la experiencia que quieras configurar, selecciona Pantalla completa o Microsoft Launcher para empezar a configurar la experiencia en los dispositivos. Si no selecciona un tipo de experiencia de dispositivo, los usuarios verán la experiencia de pantalla principal predeterminada del dispositivo.",
+ "deviceExperienceTypeKioskMode": "Pantalla completa (dedicado y totalmente administrado)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher para personalizar la experiencia de pantalla de inicio en los dispositivos administrados de la organización. Si hace que Launcher sea el iniciador predeterminado, los usuarios del dispositivo no podrán utilizar otro iniciador.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Hacer que Microsoft Launcher sea el iniciador predeterminado",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (solo totalmente administrado)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Los usuarios no podrán cambiar el fondo de pantalla a menos que les permita hacerlo. Esta configuración solo está disponible si configura un fondo de pantalla personalizado.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Permitir al usuario modificar el fondo de pantalla",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Permite aplicar su propia imagen como fondo de la pantalla principal y elegir si el usuario puede cambiarla. Si no configura un fondo de pantalla personalizado, el dispositivo conservará el actual.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Configurar fondo de pantalla personalizado",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Esta imagen aparecerá como fondo de la pantalla principal del dispositivo. Este campo solo está disponible si configura un fondo de pantalla personalizado.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Escribir la dirección URL de la imagen de fondo de pantalla",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Deshabilitado",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Ocultar",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Mostrar",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Si permite que el usuario cambie la presencia del Dock, se aplicará la configuración anterior para la implementación inicial, pero no para las implementaciones posteriores, a fin de respetar los cambios que el usuario haya realizado. Este valor solo está disponible si configura la presencia del Dock.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Permitir al usuario cambiar la presencia del Dock",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Dock es un menú que proporciona acceso rápido a los usuarios del dispositivo a sus aplicaciones y herramientas. Cuando está oculto, los usuarios deben deslizar rápidamente hacia arriba para acceder a él.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Presencia del Dock",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Si permite que el usuario habilite o deshabilite la fuente, se aplicará la configuración anterior para la implementación inicial, pero no para las implementaciones posteriores, a fin de respetar los cambios que el usuario haya realizado. Este valor solo está disponible si habilita la fuente del iniciador.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Permitir al usuario habilitar o deshabilitar la fuente",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "La fuente es una pantalla adicional situada a la derecha de la pantalla principal en la que los usuarios del dispositivo pueden acceder a sus calendarios, documentos y actividades recientes. Si no se habilita, permanece deshabilitada. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Habilitar la fuente del iniciador",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Ubicación de la barra de búsqueda",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Abajo",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Ocultar",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Arriba",
+ "deviceExperienceTypeName": "Tipo de experiencia del dispositivo",
"deviceGuardCredentialGuardDescription": "Si se habilita con bloqueo UEFI se garantiza que Credential Guard no se pueda deshabilitar en modo remoto. Si se habilita sin bloqueo UEFI, se permite que Credential Guard pueda deshabilitarse de forma remota a través de la directiva de grupo.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Identificador de dispositivo de Intune",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Número de días antes de realizar la transición desde los reinicios automáticos programados fuera de las horas activas al reinicio establecido, que requiere la programación del usuario.",
"engagedRestartTransitionScheduleName": "Hacer la transición de los usuarios al reinicio comprometido después de un reinicio automático (días)",
"enhancedOption": "Mejorado (1903 y anteriores)",
- "enrollmentProfileTypeDedicatedDevice": "Dispositivo dedicado",
- "enrollmentProfileTypeDescription": "Seleccione un tipo de perfil de inscripción para empezar a configurar MicrosoftLauncher o MicrosoftManaged Home Screen en los dispositivos. Si no selecciona ningún tipo de perfil, los usuarios verán la experiencia de pantalla de inicio predeterminada del dispositivo.",
- "enrollmentProfileTypeFullyManaged": "Totalmente administrado",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Configure Microsoft Launcher en los dispositivos totalmente administrados.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher para personalizar la experiencia de pantalla de inicio en los dispositivos administrados de la organización. Si hace que Launcher sea el iniciador predeterminado, los usuarios del dispositivo no podrán utilizar otro iniciador.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Hacer que Microsoft Launcher sea el iniciador predeterminado",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Permitir al usuario modificar el fondo de pantalla",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Permite aplicar su propia imagen como fondo de la pantalla principal y elegir si el usuario puede cambiarla. Si no configura un fondo de pantalla personalizado, el dispositivo conservará el actual.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Configurar fondo de pantalla personalizado",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Esta imagen aparecerá como fondo de la pantalla principal del dispositivo. Este campo solo está disponible si configura un fondo de pantalla personalizado.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Escribir la dirección URL de la imagen de fondo de pantalla",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Deshabilitada",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Ocultar",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Mostrar",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Dock es un menú que proporciona acceso rápido a los usuarios del dispositivo a sus aplicaciones y herramientas. Cuando está oculto, los usuarios deben deslizar rápidamente hacia arriba para acceder a él.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Presencia del Dock",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Permitir al usuario habilitar o deshabilitar la fuente",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "La fuente es una pantalla adicional situada a la derecha de la pantalla principal en la que los usuarios del dispositivo pueden acceder a sus calendarios, documentos y actividades recientes. Si no se habilita, permanece deshabilitada. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Habilitar la fuente del iniciador",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Ubicación de la barra de búsqueda",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Abajo",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Ocultar",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Arriba",
- "enrollmentProfileTypeName": "Tipo de perfil de inscripción",
"enrollmentSettingsHeading": "Configuración de inscripción",
"enterOnlyOneForDns": "Escriba una lista de servidores DNS o un servidor proxy.",
"enterpriseModeLoggingExample": "Por ejemplo, http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Dispositivos de perfil de trabajo de propiedad corporativa y totalmente administrados",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Esta configuración solo funciona para los dispositivos dedicados y totalmente administrados.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Dispositivos dedicados y totalmente administrados",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Esta configuración solo funciona para dispositivos totalmente administrados y dedicados que funcionan con una directiva de pantalla completa.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Dispositivos totalmente administrados y dedicados (solo en modo de pantalla completa)",
"gameCenterBlockedMacDescription": "Sí deshabilita Game Center, y se quita su icono de la pantalla Inicio. Está disponible para dispositivos que ejecutan macOS 10.13 o versiones posteriores.",
"gameCenterBlockedMacName": "Bloquear Game Center",
"gamingPageDescription": "Bloquear el acceso a Juegos en la aplicación Configuración.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Configura el tipo de inicio de sesión para acceder a las aplicaciones de este dispositivo de pantalla completa.",
"kioskShowTaskbarDesc": "Muestra u oculta la barra de tareas de Windows en la pantalla completa.",
"kioskShowTaskbarName": "Barra de tareas de Windows",
+ "kioskSingleInfoBoxText": "Modo de pantalla completa de una sola aplicación: Bloquea el dispositivo para ejecutar la aplicación seleccionada. Para usar este modo, primero debe aprobar y asignar la aplicación seleccionada desde la carga de trabajo de aplicaciones cliente. En dispositivos totalmente administrados, la única aplicación seleccionada que se aplicará es Managed Home Screen. Todas las demás aplicaciones se tratarán como una aplicación necesaria en su lugar.",
"kioskStartDateTime": "Hora de inicio de la ventana de mantenimiento",
"kioskStartMenuLayoutXmlDesc": "Proporciona un diseño XML que define el orden en el que las aplicaciones deben mostrarse en el menú Inicio.",
"kioskStartMenuLayoutXmlDescV2": "Al importar un archivo XML que configura el diseño de inicio se invalidan las selecciones existentes de orden de visualización y tamaño de icono. Más información",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Debe ser una ruta de acceso de archivo válida",
"mustBeAValidHttpsUrl": "Debe ser una dirección URL HTTPS válida.",
"mustBeAValidIPAddress": "Debe ser una dirección IP válida (por ejemplo, 192.168.0.1 o 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "El valor debe ser una dirección IP válida o un FQDN con un número de puerto opcional.",
"mustBeAValidIPv4Address": "Debe ser una dirección IPv4 válida (p. ej., 192.168.0.1)",
"mustBeAValidIPv6Address": "Debe ser una dirección IPv6 válida (por ejemplo, 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Debe ser una dirección URL de imagen válida, como www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Reglas de firewall de Windows del almacén local (redes públicas)",
"publicNetworkName": "Red pública (no reconocible)",
"publicOutboundConnectionsSummaryLabel": "Acción predeterminada para las conexiones salientes (redes públicas)",
- "publicPlayStoreEnabledDescription": "Los usuarios obtienen acceso a todas las aplicaciones, excepto aquellas que haya solicitado que se desinstalen en las aplicaciones cliente. Si elige \"No configurado\" para este valor, los usuarios solo podrán acceder a las aplicaciones que haya incluido como disponibles o necesarias en las aplicaciones cliente.",
+ "publicPlayStoreEnabledDescription": "Si selecciona \"Permitir\", los usuarios obtienen acceso a todas las aplicaciones, excepto a las que ha requerido desinstalar en aplicaciones cliente. Si elige \"Bloquear\" o \"Sin configurar\" para esta configuración, los usuarios solo podrán acceder a las aplicaciones que haya enumerado como disponibles o necesarias en Aplicaciones cliente.",
"publicPlayStoreEnabledName": "Permitir el acceso a todas las aplicaciones en Google Play Store",
- "publicPlayStoreEnabledWarning": "Si selecciona \"Permitir\", los usuarios podrán instalar cualquier aplicación de Google Play Store. Si posteriormente se cambia la selección a \"No configurado\", todas las apps no permitidas explícitamente para el usuario serán eliminadas del dispositivo.",
+ "publicPlayStoreEnabledWarning": "Si selecciona \"Permitir\", los usuarios podrán instalar cualquier aplicación desde el Google Play Store. Si más adelante cambia la selección a \"Bloquear\" o \"No configurado\", todas las aplicaciones se quitarán del dispositivo, excepto las aplicaciones que haya enumerado como disponibles o necesarias en Aplicaciones cliente.",
+ "publicPlayStoreSelectionAllowList": "Bloquear",
+ "publicPlayStoreSelectionBlockList": "Permitir",
+ "publicPlayStoreSelectionNotConfigured": "Sin configurar",
"publicShieldedSummaryLabel": "Blindado (redes públicas)",
"publicStealthModeSummaryLabel": "Modo sigiloso (redes públicas)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Respuestas de unidifusión a multidifusiones (redes públicas)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Eliminando...",
"photoLibrary": "Biblioteca de fotos",
"pinCharSettingTooltip": "Un PIN numérico solo permite caracteres numéricos.\r\n\r\nUn código de acceso requiere tanto caracteres alfanuméricos como símbolos permitidos.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Importante: El 1 de junio de 2024, las aplicaciones con un SDK anterior a 17.7.0 dejarán de recibir actualizaciones de la Directiva de protección de aplicaciones y se bloqueará el inicio de la aplicación por parte de los usuarios. Asegúrese de que los usuarios actualizan sus aplicaciones y de que las aplicaciones de su línea de negocio utilizan un SDK o contenedor reciente. Más información",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Plataforma",
"platformDropDownLabel": "Plataforma",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Dispositivo",
"licenseTypeUser": "Usuario"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Propiedad",
- "rule": "Regla",
- "ruleDetails": "Detalles de la regla",
- "value": "Valor"
- },
- "assignIf": "Asignar perfil si",
- "deleteWarning": "Esta acción eliminará la regla de aplicabilidad seleccionada",
- "dontAssignIf": "No asignar perfil si",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "y {0} más",
- "instructions": "Especifique cómo aplicar este perfil en un grupo asignado. Intune solo aplicará el perfil a los dispositivos que cumplan los criterios combinados de estas reglas.",
- "maxText": "Máx.",
- "minText": "Mín.",
- "noActionRow": "No hay reglas de aplicabilidad especificadas",
- "oSVersion": "Por ejemplo, 1.2.3.4",
- "toText": "hasta el",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home en un solo idioma",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "Edición del sistema operativo",
- "windows10OsVersion": "Versión del SO",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Es igual a",
- "greaterThan": "Mayor que",
- "greaterThanOrEqualTo": "Mayor o igual que",
- "lessThan": "Menor que",
- "lessThanOrEqualTo": "Menor o igual que",
- "notEqualTo": "No igual a"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Exigir comprobación de firma del script y ejecutarlo silenciosamente",
- "enforceSignatureCheckTooltip": "Seleccione \"Sí\" para comprobar que el script está firmado por un editor de confianza, lo que permite ejecutarlo sin que se muestren advertencias ni avisos. El script se ejecutará sin bloqueos. Seleccione \"No\" (predeterminado) para ejecutarlo con la confirmación del usuario final sin comprobación de la firma.",
- "header": "Usar un script de detección personalizado",
- "runAs32Bit": "Ejecutar script como proceso de 32 bits en clientes de 64 bits",
- "runAs32BitTooltip": "Seleccione \"Sí\" para ejecutar el script en un proceso de 32 bits en clientes de 64 bits. Seleccione \"No\" (predeterminado) para ejecutarlo en un proceso de 64 bits en clientes de 64 bits. Los clientes de 32 bits ejecutan el script en un proceso de 32 bits.",
- "scriptContent": "Contenido del script",
- "scriptFile": "Archivo de script",
- "scriptFileNotSelectedValidation": "No hay ningún archivo de script seleccionado.",
- "scriptFileTooltip": "Seleccione un script de PowerShell que detecte la presencia de la aplicación en el cliente. La aplicación se detectará cuando el script devuelva un código de salida de valor 0 y escriba un valor de cadena en STDOUT.",
- "scriptSizeLimitValidation": "El script de detección supera el tamaño máximo permitido. Para resolverlo, reduzca el tamaño del script de detección."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Fecha de creación",
- "dateModified": "Fecha de modificación",
- "doesNotExist": "El archivo o la carpeta no existe.",
- "fileOrFolderExists": "El archivo o la carpeta existe",
- "sizeInMB": "Tamaño en MB",
- "version": "Cadena (versión)"
- },
- "associatedWith32Bit": "Asociado a una aplicación de 32 bits en clientes de 64 bits",
- "associatedWith32BitTooltip": "Seleccione \"Sí\" para expandir las variables de entorno de ruta de acceso en el contexto de 32 bits en clientes de 64 bits. Seleccione \"No\" (predeterminado) para expandir las variables de ruta de acceso en el contexto de 64 bits en clientes de 64 bits. Los clientes de 32 bits siempre usan el contexto de 32 bits.",
- "detectionMethod": "Método de detección",
- "detectionMethodTooltip": "Seleccione el tipo de método de detección que se usa para validar la presencia de la aplicación.",
- "fileOrFolder": "Archivo o carpeta",
- "fileOrFolderToolTip": "El archivo o la carpeta para detectar.",
- "operator": "Operador",
- "operatorTooltip": "Seleccione el operador para el método de detección que se usa para validar la comparación.",
- "path": "Ruta de acceso",
- "pathTooltip": "Ruta de acceso completa de la carpeta que contiene el archivo o la carpeta para detectar.",
- "value": "Valor",
- "valueTooltip": "Seleccione un valor que coincida con el método de detección seleccionado. Los métodos de detección de fecha deben especificarse en la hora local."
- },
- "GridColumns": {
- "pathOrCode": "Ruta o código",
- "type": "Tipo"
- },
- "MsiRule": {
- "operator": "Operador",
- "operatorTooltip": "Seleccione el operador para la comparación de validación de versión del producto MSI.",
- "productCode": "Código de producto MSI",
- "productCodeTooltip": "Código de producto MSI válido para la aplicación.",
- "productVersion": "Valor",
- "productVersionCheck": "Comprobación de versión del producto MSI",
- "productVersionCheckTooltip": "Seleccione \"Sí\" para comprobar la versión del producto MSI junto con su código correspondiente.",
- "productVersionTooltip": "Especifique la versión del producto MSI para la aplicación."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Comparación de enteros",
- "keyDoesNotExist": "La clave no existe",
- "keyExists": "La clave existe",
- "stringComparison": "Comparación de cadena",
- "valueDoesNotExist": "El valor no existe",
- "valueExists": "El valor existe",
- "versionComparison": "Comparación de versiones"
- },
- "associatedWith32Bit": "Asociado a una aplicación de 32 bits en clientes de 64 bits",
- "associatedWith32BitTooltip": "Seleccione \"Sí\" para buscar en el Registro de 32 bits en clientes de 64 bits. Seleccione \"No\" (predeterminado) para buscar en el Registro de 64 bits en clientes de 64 bits. Los clientes de 32 bits siempre buscan en el Registro de 32 bits.",
- "detectionMethod": "Método de detección",
- "detectionMethodTooltip": "Seleccione el tipo de método de detección que se usa para validar la presencia de la aplicación.",
- "keyPath": "Ruta de acceso de la clave",
- "keyPathTooltip": "La ruta de acceso completa de la entrada del Registro que contiene el valor para detectar.",
- "operator": "Operador",
- "operatorTooltip": "Seleccione el operador para el método de detección que se usa para validar la comparación.",
- "value": "Valor",
- "valueName": "Nombre de valor",
- "valueNameTooltip": "El nombre del valor de Registro para detectar.",
- "valueTooltip": "Seleccione un valor que coincida con el método de detección elegido."
- },
- "RuleTypeOptions": {
- "file": "Archivo",
- "mSI": "MSI",
- "registry": "Registro"
- },
- "gridAriaLabel": "Reglas de detección",
- "header": "Cree una regla que indique la presencia de la aplicación.",
- "noRulesSelectedPlaceholder": "No se ha especificado ninguna regla.",
- "ruleTableLimit": "Puede agregar hasta 25 reglas de detección.",
- "ruleType": "Tipo de regla",
- "ruleTypeTooltip": "Elija el tipo de regla de detección que se va a agregar."
- },
- "RuleConfigurationOptions": {
- "customScript": "Usar un script de detección personalizado",
- "manual": "Configurar manualmente las reglas de detección"
- },
- "bladeTitle": "Reglas de detección",
- "header": "Configure reglas específicas de la aplicación que se usen para detectar la presencia de esta.",
- "rulesFormat": "Formato de las reglas",
- "rulesFormatTooltip": "Elija configurar manualmente las reglas de detección o use un script personalizado para detectar la presencia de la aplicación.",
- "selectorLabel": "Reglas de detección"
+ "BooleanActions": {
+ "allow": "Permitir",
+ "block": "Bloquear",
+ "configured": "Configurado",
+ "disable": "Deshabilitar",
+ "dontRequire": "No requerir",
+ "enable": "Habilitar",
+ "hide": "Ocultar",
+ "limit": "Límite",
+ "notConfigured": "Sin configurar",
+ "require": "Requerir",
+ "show": "Mostrar",
+ "yes": "Sí"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Configuración de SmartScreen, aplicación recomendada de Microsoft Edge: Windows 10 en la plantilla de configuración en la nube. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Detección de puntos de conexión y respuesta"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "Aislamiento de aplicaciones y navegador",
- "aSRApplicationControl": "Control de aplicaciones",
- "aSRAttackSurfaceReduction": "Reglas de reducción de la superficie expuesta a ataques",
- "aSRDeviceControl": "Control de dispositivos",
- "aSRExploitProtection": "Protección contra vulnerabilidades",
- "aSRWebProtection": "Protección web (Microsoft Edge, versión anterior)",
- "aVExclusions": "Exclusiones del Antivirus de Microsoft Defender",
- "antivirus": "Antivirus de Microsoft Defender",
- "cloudPC": "Línea base de seguridad de Windows 365",
- "default": "Seguridad de los puntos de conexión",
- "defenderTest": "Demostración de Microsoft Defender para punto de conexión",
- "diskEncryption": "BitLocker",
- "eDR": "Detección de puntos de conexión y respuesta",
- "edgeSecurityBaseline": "Línea base de Microsoft Edge",
- "edgeSecurityBaselinePreview": "Versión preliminar: línea base de Microsoft Edge",
- "editionUpgradeConfiguration": "Actualización de edición y cambio de modo",
- "firewall": "Firewall de Windows",
- "firewallRules": "Reglas de firewall de Windows",
- "identityProtection": "Protección de cuentas",
- "identityProtectionPreview": "Protección de cuentas (versión preliminar)",
- "mDMSecurityBaseline1810": "Línea base de seguridad de MDM para Windows 10 y versiones posteriores a octubre de 2018",
- "mDMSecurityBaseline1810Preview": "Versión preliminar: Línea base de seguridad de MDM para Windows 10 y versiones posteriores a octubre de 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Versión preliminar: Línea base de seguridad de MDM para Windows 10 para octubre de 2018 (beta)",
- "mDMSecurityBaseline1906": "Línea base de seguridad de MDM para Windows 10 y versiones posteriores a mayo de 2019",
- "mDMSecurityBaseline2004": "Línea base de seguridad de MDM para Windows 10 y versiones posteriores para agosto de 2020",
- "mDMSecurityBaseline2101": "Línea de base de seguridad de MDM para Windows 10 y posteriormente diciembre de 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "Firewall de macOS",
- "microsoftDefenderBaseline": "Línea de base de Microsoft Defender para punto de conexión",
- "office365Baseline": "Línea de base de Microsoft Office O365",
- "office365BaselinePreview": "Versión preliminar: Línea de base de Microsoft Office O365",
- "securityBaselines": "Líneas base de seguridad",
- "test": "Plantilla de prueba",
- "testFirewallRulesSecurityTemplateName": "Reglas de Firewall de Windows (prueba)",
- "testIdentityProtectionSecurityTemplateName": "Protección de cuentas (prueba)",
- "windowsSecurityExperience": "Experiencia de Seguridad de Windows"
- },
- "Firewall": {
- "mDE": "Firewall de Windows"
- },
- "FirewallRules": {
- "mDE": "Reglas de firewall de Windows"
- },
- "OneDriveKnownFolderMove": {
- "description": "Configuración de movimiento de carpetas conocidas de OneDrive: Windows 10 en la plantilla de configuración en la nube. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Protección de cuentas",
- "administrativeTemplates": "Plantillas administrativas",
- "androidCompliancePolicy": "Directiva de cumplimiento de Android",
- "aospDeviceOwnerCompliancePolicy": "Directiva de cumplimiento de Android (AOSP)",
- "applicationControl": "Control de aplicaciones para empresas",
- "attackSurfaceReductionRules": "Reglas de reducción de la superficie expuesta a ataques",
- "bitlocker": "BitLocker",
- "custom": "Personalizado",
- "deliveryOptimization": "Optimización de entrega",
- "derivedPersonalIdentityVerificationCredential": "Credencial derivada",
- "deviceControl": "Control de dispositivos",
- "deviceFeatures": "Características del dispositivo",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Bloqueo de dispositivos",
- "deviceOwner": "Perfil de trabajo de propiedad corporativa, dedicado y totalmente administrado",
- "deviceRestrictions": "Restricciones de dispositivos",
- "deviceRestrictionsWindows10Team": "Restricciones de dispositivos (Windows 10 Team)",
- "domainJoinPreview": "Unión a un dominio",
- "editionUpgradeAndModeSwitch": "Actualización de edición y cambio de modo",
- "education": "Educación",
- "email": "Correo electrónico",
- "emailSamsungKnoxOnly": "Correo electrónico (solo Samsung KNOX)",
- "endpointProtection": "Endpoint Protection",
- "expeditedCheckin": "Configuración de administración de dispositivos móviles",
- "exploitProtection": "Protección contra vulnerabilidades",
- "extensions": "Extensiones",
- "hardwareConfigurations": "Configuraciones de BIOS y otras opciones",
- "identityProtection": "Identity Protection",
- "iosCompliancePolicy": "Directiva de cumplimiento de iOS",
- "kiosk": "Pantalla completa",
- "localUsersAndGroups": "Editar pertenencia a grupos de usuarios",
- "macCompliancePolicy": "Directiva de cumplimiento de Mac",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Línea de base de seguridad de Aplicaciones de Microsoft 365 para empresas",
- "microsoftDefenderAntivirus": "Antivirus de Microsoft Defender",
- "microsoftDefenderAntivirusexclusions": "Exclusiones del Antivirus de Microsoft Defender",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender para punto de conexión (dispositivos de escritorio que ejecutan Windows 10 o versiones posteriores)",
- "microsoftDefenderFirewallRules": "Reglas de firewall de Windows",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Línea base de seguridad para Microsoft Edge",
- "mxProfileZebraOnly": "Perfil de MX (solo Zebra)",
- "networkBoundary": "Límite de red",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Reemplazar la directiva de grupo",
- "pkcsCertificate": "Certificado PKCS",
- "pkcsImportedCertificate": "Certificado PKCS importado",
- "preferenceFile": "Archivo de preferencias",
- "presets": "Valores preestablecidos",
- "scepCertificate": "Certificado SCEP",
- "secureAssessmentEducation": "Evaluación segura (Educación)",
- "securityBaselineForHololens2Advanced": "Línea base de seguridad avanzada para HoloLens 2",
- "securityBaselineForHololens2Standard": "Línea base de seguridad Estándar para HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Línea base de seguridad para Microsoft Edge",
- "settingsCatalog": "Catálogo de configuración",
- "sharedMultiUserDevice": "Dispositivo multiusuario compartido",
- "softwareUpdates": "Actualizaciones de software",
- "trustedCertificate": "Certificado de confianza",
- "unknown": "Desconocido",
- "unsupported": "No compatible",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Importación de Wi-Fi",
- "windows10CompliancePolicy": "Directiva de cumplimiento de Windows 10/11",
- "windows10MobileCompliancePolicy": "Directiva de cumplimiento de Windows 10 Mobile",
- "windows10XScep": "Certificado SCEP: PRUEBA",
- "windows10XTrustedCertificate": "Certificado de confianza: PRUEBA",
- "windows10XVPN": "VPN: PRUEBA",
- "windows10XWifi": "WiFi: PRUEBA",
- "windows11SecurityBaseline": "Base de seguridad de Windows 10 y versiones posteriores",
- "windows365SecurityBaseline": "Línea base de seguridad de Windows 365",
- "windows8CompliancePolicy": "Directiva de cumplimiento de Windows 8",
- "windowsHealthMonitoring": "Seguimiento de estado de Windows",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Directiva de cumplimiento de Windows Phone",
- "windowsUpdateforBusiness": "Windows Update para empresas",
- "wiredNetwork": "Red cableada",
- "workProfile": "Perfil de trabajo de propiedad personal"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Hacer que la actualización esté disponible gradualmente",
- "immediateStart": "Hacer que la actualización esté disponible lo antes posible",
- "startDateOnly": "Hacer que la actualización esté disponible en una fecha específica"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Dispositivos administrados",
- "devicesWithoutEnrollment": "Aplicaciones administradas"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filtro",
- "assignmentFilterTypeColumnHeader": "Modo de filtro",
- "assignmentToast": "Notificaciones del usuario final",
- "assignmentTypeTableHeader": "TIPO DE ASIGNACIÓN",
- "autoUpdate": "Actualizar automáticamente",
- "deadlineTimeColumnLabel": "Fecha límite de instalación",
- "deliveryOptimizationPriorityHeader": "Prioridad de optimización de distribución",
- "groupTableHeader": "Grupo",
- "installContextLabel": "Contexto de instalación",
- "isRemovable": "Instalar como extraíble",
- "licenseTypeLabel": "Tipo de licencia",
- "modeTableHeader": "Modo de grupo",
- "policySet": "Conjunto de directivas",
- "preventAutoAppUpdate": "Impedir actualizaciones automáticas de aplicaciones",
- "preventManagedAppBackup": "Impedir la copia de seguridad de aplicaciones de iCloud",
- "restartGracePeriodHeader": "Período de gracia de reinicio",
- "startTimeColumnLabel": "Disponibilidad",
- "tracks": "Seguimientos",
- "uninstallOnRemoval": "Desinstalar al eliminar el dispositivo",
- "updateMode": "Prioridad de actualización",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "Aplicación web de AAD",
- "androidEnterpriseSystemApp": "Aplicación del sistema Android Enterprise",
- "androidForWorkApp": "Aplicación de Google Play Store administrado",
- "androidLobApp": "Aplicación de línea de negocio Android",
- "androidStoreApp": "Aplicación de la tienda Android",
- "builtInAndroid": "Aplicación Android integrada",
- "builtInApp": "Aplicación integrada",
- "builtInIos": "Aplicación iOS integrada",
- "iosIPadOSWebClip": "Clip web de iOS/iPadOS",
- "iosLobApp": "Aplicación de línea de negocio iOS",
- "iosStoreApp": "Aplicación de la tienda iOS",
- "iosVppApp": "Aplicación del Programa de Compras por Volumen iOS",
- "lineOfBusinessApp": "Aplicación de línea de negocio",
- "macOSDmgApp": "Aplicación macOS (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Aplicación de línea de negocio de macOS",
- "macOSMicrosoftDefenderApp": "ATP de Microsoft Defender (macOS)",
- "macOSOfficeSuiteApp": "Conjunto de programas Office para macOS",
- "macOSPkgApp": "Aplicación macOS (PKG)",
- "macOSWebClip": "Clip web de macOS",
- "macOsVppApp": "Aplicación del Programa de Compras por Volumen de macOS",
- "managedAndroidLobApp": "Aplicación de línea de negocio Android administrada",
- "managedAndroidStoreApp": "Aplicación de la tienda Android administrada",
- "managedGooglePlayApp": "Aplicación de Google Play Store administrado",
- "managedGooglePlayPrivateApp": "Aplicación privada de Google Play administrado",
- "managedGooglePlayWebApp": "Vínculo web de Google Play administrado",
- "managedIosLobApp": "Aplicación de línea de negocio iOS administrada",
- "managedIosStoreApp": "Aplicación de la tienda iOS administrada",
- "microsoftStoreForBusinessApp": "Aplicación de la Tienda Microsoft para Empresas",
- "microsoftStoreForBusinessReleaseManagedApp": "Tienda Microsoft para Empresas",
- "officeAddIn": "Complemento de Office",
- "officeSuiteApp": "Aplicaciones de Microsoft 365 (Windows 10 y versiones posteriores)",
- "sharePointApp": "Aplicación de SharePoint",
- "teamsApp": "Aplicación Teams",
- "webApp": "Vínculo web",
- "win32CatalogApp": "Aplicación de catálogo de Windows (Win32)",
- "winGetPublicApp": "Repositorio de la comunidad de Administrador de paquetes de Windows",
- "winGetStoreApp": "Aplicación Microsoft Store (nuevo)",
- "windowsAppXLobApp": "Aplicación de línea de negocio de AppX para Windows",
- "windowsClassicApp": "Aplicación de Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 y versiones posteriores)",
- "windowsMobileMsiLobApp": "Aplicación de línea de negocio de MSI para Windows",
- "windowsPhone81AppXBundleLobApp": "Aplicación de línea de negocio AppX para Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "Aplicación de línea de negocio AppX para Windows Phone 8.1",
- "windowsPhone81StoreApp": "Aplicación de la Tienda Windows Phone 8.1",
- "windowsPhoneXapLobApp": "Aplicación de línea de negocio de XAP para Windows Phone",
- "windowsStoreApp": "Aplicación de Microsoft Store (heredada)",
- "windowsUniversalAppXLobApp": "Aplicación de línea de negocio de AppX para Windows Universal",
- "windowsUniversalLobApp": "Aplicación de línea de negocio Windows universal",
- "windowsWebApp": "Vínculo web de Windows"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Excluida",
- "include": "Incluido",
- "includeAllDevicesVirtualGroup": "Incluido",
- "includeAllUsersVirtualGroup": "Incluido"
- },
- "AssignmentToast": {
- "hideAll": "Ocultar todas las notificaciones del sistema",
- "showAll": "Mostrar todas las notificaciones del sistema",
- "showReboot": "Mostrar notificaciones del sistema para reinicios de equipo"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Sí",
- "notConfigured": "No"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Segundo plano",
- "displayText": "Descarga de contenido en {0}",
- "foreground": "Primer plano",
- "header": "Prioridad de optimización de distribución"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "La instalación de la aplicación puede forzar el reinicio del dispositivo",
- "basedOnReturnCode": "Determinar comportamiento en función de códigos de retorno",
- "force": "Intune forzará un reinicio obligatorio del dispositivo",
- "suppress": "Ninguna acción específica"
- },
- "FilterType": {
- "exclude": "Excluir",
- "include": "Incluir",
- "none": "Ninguno"
- },
- "InstallIntent": {
- "available": "Disponible para dispositivos inscritos",
- "availableWithoutEnrollment": "Disponible con o sin inscripción",
- "notApplicable": "No aplicable",
- "required": "Requerido",
- "uninstall": "Desinstalar"
- },
- "SettingType": {
- "assignmentType": "Tipo de asignación",
- "deviceLicensing": "Tipo de licencia",
- "installContext": "Desinstalar al eliminar el dispositivo",
- "toastSettings": "Notificaciones del usuario final",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Predeterminado",
- "postponed": "Pospuesto",
- "priority": "Prioridad alta"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Configure los dispositivos para el aprovisionamiento inicial.",
- "title": "Preparación del dispositivo"
- },
- "EnrollmentSettings": {
- "description": "Configure las opciones de inscripción, como bloquear la inscripción y asignarlas a los usuarios.",
- "title": "Configuración de la inscripción"
- },
- "OSConfiguration": {
- "menuDescription": "Configure las opciones que los usuarios pueden usar para recuperar Windows desde una unidad flash de arranque.",
- "menuTitle": "Configuración de recuperación del sistema operativo Windows"
- },
- "coManagementAuthorityDesc": "Establezca la configuración de administración conjunta para la integración de Configuration Manager.",
- "coManagementAuthorityTitle": "Configuración de administración conjunta ",
- "deploymentProfiles": "Perfiles de Windows AutoPilot Deployment",
- "description": "Obtenga información sobre las siete formas diferentes en que los usuarios o administradores pueden inscribir una PC con Windows 10/11 en Intune.",
- "descriptionLabel": "Métodos de inscripción de Windows",
- "enrollmentStatusPage": "Página de estado de inscripción"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Aprobar automáticamente todas las actualizaciones de controladores recomendadas",
- "manual": "Aprobar e implementar manualmente actualizaciones de controladores"
- },
- "BulkActions": {
- "button": "Acciones en masa"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Método de aprobación:"
- },
- "DeploymentDeferralInDays": {
- "label": "Hacer que las actualizaciones estén disponibles después de",
- "units": "(días)",
- "value": "{0} días"
- },
- "DriverAction": {
- "header": "Seleccione una acción a continuación.",
- "label": "Acción del controlador",
- "placeholder": "Seleccionar una acción"
- },
- "IncludedDrivers": {
- "label": "Controladores incluidos"
- },
- "SelectDrivers": {
- "header": "Seleccionar controladores para incluirlos en la acción masiva"
- },
- "SelectDriversToInclude": {
- "button": "Seleccionar controladores para incluir"
- },
- "SelectLessDrivers": {
- "validation": "Como máximo, se pueden seleccionar cien controladores"
- },
- "SelectMoreDrivers": {
- "validation": "Debe seleccionarse al menos un controlador"
- },
- "SelectedDrivers": {
- "label": "Controladores seleccionados"
- },
- "availabilityDate": "Hacer disponible en Windows Update",
- "bladeTitle": "Actualizaciones de controladores para Windows 10 y versiones posteriores (versión preliminar)",
- "lastSync": "Última sincronización:",
- "lastSyncDefaultText": "Recopilación de inventario inicial pendiente",
- "loadError": "Error al cargar."
- },
- "DriverStatus": {
- "approved": "Aprobado",
- "declined": "Rechazado",
- "export": "Exportando los controladores recomendados",
- "needsReview": "Necesita revisión",
- "paused": "En pausa"
- },
- "DriversToReview": {
- "text": "{0} para revisar"
- },
- "Subtitle": {
- "automatic": "Directiva de actualización del controlador de aprobación automática",
- "manual": "Directiva de actualización del controlador de aprobación manual"
- },
- "SyncNotification": {
- "failure": "No se puede sincronizar {0}",
- "failureDescription": "Se ha detectado un error y no se puede completar la sincronización solicitada. Vuelve a intentarlo.",
- "pending": "{0} sincronización en curso",
- "pendingDescription": "Se están recuperando los datos más recientes. Este proceso puede tardar varios minutos.",
- "success": "{0} sincronización completada",
- "successDescription": "La sincronización con el servicio WUfB se completó en {0}"
- },
- "SyncSpinner": {
- "text": "Hay una sincronización en curso. Esto puede tardar varios minutos. Busque una alerta o vuelva a comprobarla en unos minutos."
- },
- "TabName": {
- "basics": "Datos básicos",
- "driverUpdateSettings": "Configuración",
- "otherDrivers": "Otros controladores",
- "properties": "Propiedades",
- "recommendedDrivers": "Controladores recomendados"
- },
- "driverAddFilter": "Agregar filtro",
- "driverApplicableDevices": "Dispositivos aplicables",
- "driverApprovalStatus": "Estado",
- "driverBulkActions": "Acciones en masa",
- "driverClass": "Clase de controlador",
- "driverCount": "Mostrando de {0} a {1} de {2} registros",
- "driverFilterNoneSelected": "No se ha seleccionado ninguno",
- "driverManufacturer": "Fabricante",
- "driverName": "Nombre de controlador",
- "driverNameLower": "implementación de actualización de controladores de windows",
- "driverNameUpper": "implementación de actualización de controladores de Windows",
- "driverRefresh": "Actualizar",
- "driverReleaseDate": "Fecha de lanzamiento",
- "driverSearch": "Buscar",
- "driverSearchKeyword": "Escribir palabra clave de búsqueda",
- "driverVersion": "Versión",
- "firstDeploymentDate": "Primera implementación",
- "infoBoxText": "El inventario puede tardar hasta 24 horas en rellenarse después de asignar y crear una directiva.",
- "textBlockText": "Seleccione la configuración de implementación y aprobación de directivas. Elija configurar una directiva para aprobar e implementar actualizaciones de forma automática o manual. El método de aprobación no se puede cambiar una vez creada una directiva, pero los cambios en las aprobaciones de controladores individuales y los detalles de implementación serán posibles una vez que se compile un inventario para los dispositivos asignados."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Use estos valores para mantenerse informado acerca de qué usuarios instalan aplicaciones que no están aprobadas para su uso en la empresa. Seleccione el tipo de lista de aplicaciones restringidas:
\r\n Aplicaciones prohibidas: es una lista de las aplicaciones sobre las que desea que se le informe cuando los usuarios las instalan. \r\n Aplicaciones aprobadas: es una lista de las aplicaciones que están aprobadas para su uso en la empresa. Cuando los usuarios instalan una aplicación que no está en esta lista, se le notifica. \r\n ",
- "androidZebraMxZebraMx": "Cargue un perfil de MX en formato XML para configurar los dispositivos Zebra.",
- "iosDeviceFeaturesAirprint": "Use estos valores para configurar los dispositivos iOS a fin de conectarse automáticamente a las impresoras compatibles con AirPrint de la red. Necesita la dirección IP y la ruta de acceso de recurso de las impresoras.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Configure una extensión de la aplicación que habilite el inicio de sesión único (SSO) para los dispositivos que ejecutan iOS 13.0 o versiones posteriores.",
- "iosDeviceFeaturesHomeScreenLayout": "Configure la distribución de las pantallas de inicio y del Dock en los dispositivos iOS. Algunos dispositivos pueden tener límites en cuanto al número de elementos que se pueden mostrar.",
- "iosDeviceFeaturesIOSWallpaper": "Muestra una imagen que aparecerá en la pantalla de inicio o la pantalla de bloqueo de los dispositivos iOS.\r\n Para mostrar una imagen única en cada ubicación, cree un perfil con la imagen de la pantalla de bloqueo y otro con la de la pantalla de inicio.\r\n A continuación, asigne ambos perfiles a sus usuarios.\r\n \r\n
\r\n
Tamaño máximo de archivo: 750 KB
\r\n
Tipo de archivo: PNG, JPG o JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Especificar la configuración de notificación de las aplicaciones. Compatible con iOS 9.3 y versiones posteriores.",
- "iosDeviceFeaturesSharedDevice": "Especifica el texto opcional que se muestra en la pantalla bloqueada. Se admite en iOS 9.3 y versiones posteriores. Más información",
- "iosGeneralApplicationRestrictions": "Use estos valores para mantenerse informado acerca de qué usuarios instalan aplicaciones que no están aprobadas para su uso en la empresa. Seleccione el tipo de lista de aplicaciones restringidas:
\r\n Aplicaciones prohibidas: es una lista de las aplicaciones sobre las que desea que se le informe cuando los usuarios las instalan. \r\n Aplicaciones aprobadas: es una lista de las aplicaciones que están aprobadas para su uso en la empresa. Cuando los usuarios instalan una aplicación que no está en esta lista, se le notifica. \r\n ",
- "iosGeneralApplicationVisibility": "Use la lista Aplicaciones visibles para especificar las aplicaciones de iOS que el usuario puede ver o iniciar. Use la lista Aplicaciones ocultas para especificar las aplicaciones de iOS que el usuario no puede ver ni iniciar.",
- "iosGeneralAutonomousSingleAppMode": "Las aplicaciones que se agregan a esta lista y se asignan a un dispositivo pueden bloquearlo de forma que solo ejecute esa aplicación una vez que se ha iniciado, o bien bloquear el dispositivo mientras se ejecuta una acción determinada (por ejemplo, hacer un examen). Una vez completada la acción, o si se quita la restricción, el dispositivo vuelve a su estado normal.",
- "iosGeneralKiosk": "El modo de pantalla completa bloquea varias configuraciones en un dispositivo o especifica la aplicación que puede ejecutarse en este. Puede ser útil, por ejemplo, en una tienda o entornos similares, en los que un dispositivo debe ejecutar una única aplicación de demostración.",
- "macDeviceFeaturesAirprint": "Use estas opciones para configurar los dispositivos macOS de forma que se conecten automáticamente a impresoras compatibles con AirPrint de su red. Necesitará la dirección IP y la ruta de acceso a los recursos de sus impresoras.",
- "macDeviceFeaturesAssociatedDomains": "Configure los dominios asociados para compartir datos y credenciales de inicio de sesión entre las aplicaciones y los sitios web de su organización. Este perfil se puede aplicar a los dispositivos que ejecutan macOS 10.15 o versiones posteriores.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Configure una extensión de la aplicación que habilite el inicio de sesión único (SSO) para los dispositivos que ejecutan macOS 10.15 o versiones posteriores.",
- "macDeviceFeaturesLoginItems": "Elija qué aplicaciones, archivos y carpetas se abren cuando los usuarios inician sesión en los dispositivos. Si no quiere que los usuarios cambien la forma en que se abren las aplicaciones seleccionadas, puede ocultar la aplicación en la configuración del usuario.",
- "macDeviceFeaturesLoginWindow": "Configure la apariencia de la pantalla de inicio de sesión de macOS y las funciones disponibles para los usuarios antes y después de iniciar sesión.",
- "macExtensionsKernelExtensions": "Use estas opciones para configurar la directiva de extensión de kernel en dispositivos Mac OS que ejecutan 10.13.2 o posterior.",
- "macGeneralDomains": "Los correos electrónicos que el usuario envía o recibe y no coinciden con los dominios que especifique aquí se marcarán como de no confianza.",
- "windows10EndpointProtectionApplicationGuard": "Al utilizar Microsoft Edge, la Protección de aplicaciones de Microsoft Defender protege su entorno de sitios que su organización no ha definido todavía como de confianza. Cuando los usuarios visitan sitios que no figuran en el límite de red aislada, los sitios se abren en una sesión de exploración virtual en Hyper-V. Los sitios de confianza se definen mediante un límite de red, que puede establecerse en Configuración del dispositivo. Tenga en cuenta que esta característica solo está disponible para dispositivos que ejecutan Windows 10 de 64 bits o versiones posteriores.",
- "windows10EndpointProtectionCredentialGuard": "Al habilitar Credential Guard, se habilitan los valores obligatorios siguientes:\r\n \r\n
\r\n
Enable virtualization-based security: activa la seguridad basada en la virtualización (VBS) la próxima vez que se reinicie. Este tipo de seguridad usa el hipervisor de Windows para proporcionar compatibilidad con los servicios de seguridad.
\r\n \r\n
Secure Boot with Direct Memory Access: activa VBS con arranque seguro y acceso directo a memoria (DMA).
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Elija aplicaciones adicionales que deban auditarse o con confianza para ejecutarse mediante el Control de aplicaciones de Microsoft Defender. Se confía automáticamente en la ejecución de los componentes de Windows y de todas las aplicaciones de Microsoft Store.
\r\n Las aplicaciones no se bloquearán al ejecutarse en modo “Solo auditoría”. Este modo registra todos los eventos en los registros de cliente locales.\r\n ",
- "windows10GeneralPrivacyPerApp": "Agregue las aplicaciones que deben tener un comportamiento de privacidad diferente al establecido en “Privacidad predeterminada”.",
- "windows10NetworkBoundaryNetworkBoundary": "El límite de red es una lista de los recursos de empresa, como los intervalos de direcciones IP y dominios hospedados en la nube de los equipos que se incluyen en la red empresarial. Defina límites de red a fin de aplicar directivas para proteger los datos que residen en estas ubicaciones.",
- "windowsHealthMonitoring": "Configure la directiva de seguimiento de estado de Windows.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone puede bloquear la instalación o el inicio de aplicaciones incluidas en la lista de aplicaciones prohibidas o no especificadas en la lista de aplicaciones aprobadas a los usuarios. Todas las aplicaciones administradas deben agregarse a la lista aprobada."
- },
- "Inputs": {
- "accountDomain": "Dominio de cuenta",
- "accountDomainHint": "por ejemplo, contosodomain",
- "accountDomainInfoBalloon": "Especifique el dominio de la cuenta del usuario.",
- "accountTypeInfoBalloon": "Especifique el tipo de cuenta que se configura según el modelo de autenticación",
- "allowContactSetting": "Permitir que el usuario cambie la configuración de contacto",
- "allowContactSyncInfoBalloon": "Especifique si el usuario tiene permiso para cambiar la configuración de sincronización de contactos",
- "allowUserChange": "Permitir que el usuario cambie la configuración",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Escriba un nombre de paquete similar a com.microsoft.word",
- "androidUrlValidation": "Especifique una dirección URL válida, similar a https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "Contexto de instalación de la aplicación",
- "appUrlLabel": "Dirección URL de AppStore",
- "appleUrlValidation": "Especifique una dirección URL válida, similar a https://www.itunes.apple.com/es/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Tipo de dispositivo aplicable",
- "assignmentActionLabel": "Modo",
- "authenticationMethodInfoBalloon": "Especifique el método de autenticación para el usuario",
- "authenticationMetod": "Método de autenticación",
- "authenticationType": "Tipo de autenticación",
- "authenticationTypeInfoBalloon": "Especifique el tipo de autenticación para el usuario",
- "availableLicenseCount": "Licencias disponibles",
- "basicAuth": "Autenticación básica",
- "biometricsInfoBalloon": "Puede que se requiera información biométrica (como TouchID o FaceID) para el acceso de los usuarios a la aplicación en su dispositivo. En caso de requerirse, dicha información se usa junto con el método de autenticación seleccionado en el perfil. Esta configuración no debe habilitarse si se han implementado directivas de protección de aplicaciones de Intune, ya que estas incluyen requisitos para el acceso a los datos administrados. Si se habilitan ambas opciones, se producirán múltiples solicitudes de acceso para Outlook Mobile. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como desactivada. ",
- "bookNameLabel": "Nombre del libro",
- "bundleDescriptionHint": "Escriba una descripción que defina las aplicaciones incluidas.",
- "calendar": "Calendario",
- "categoryLabel": "Categoría",
- "categoryNameLabel": "Nombre predeterminado",
- "certProfileType": "Tipo de perfil del certificado",
- "certificate": "Certificado",
- "certificates": "Certificados",
- "commandLineLabel": "Argumentos de línea de comandos",
- "commandLineSizeHint": "El texto de los argumentos de la línea de comandos tiene una longitud máxima de 1024 caracteres.",
- "configurationSettingsFormatLabel": "Formato de opciones de configuración",
- "configurationSettingsLabel": "Formato de configuración",
- "contactSync": "Guardar contactos",
- "contactSyncInfoBalloon": "Al guardar contactos en la libreta de direcciones nativa del dispositivo móvil, se pueden vincular las llamadas y mensajes de texto nuevos a los contactos de Outlook existentes del usuario. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como desactivada.",
- "contacts": "Contactos",
- "createdDateTime": "Creada",
- "defaultCategoryHint": "Las categorías predeterminadas no se pueden cambiar",
- "deploySMimeCertsFromIntune": "Implementar certificados S/MIME desde Intune",
- "descriptionGenericLabel": "Descripción",
- "descriptionHint": "Escribir una descripción...",
- "descriptionLabel": "Descripción",
- "descriptionSizeHint": "La descripción no debe tener más de 10,000 caracteres.",
- "developerLabel": "Desarrollador",
- "developerSizeHint": "El nombre del desarrollador tiene una longitud máxima de 256 caracteres.",
- "disable": "Deshabilitar",
- "disabled": "Deshabilitada",
- "displayNameLabel": "Nombre",
- "displayVersionHint": "Escribir la versión de la aplicación",
- "displayVersionLabel": "Versión de la aplicación",
- "displayVersionLengthCheck": "La longitud de la versión de visualización debe ser de 130 caracteres como máximo.",
- "eBookCategoryNameLabel": "Nombre predeterminado",
- "emailAccount": "Nombre de la cuenta de correo electrónico",
- "emailAccountHint": "Por ejemplo, Correo electrónico corporativo.",
- "emailAccountInfoBalloon": "Especifique el nombre para mostrar de la cuenta de correo electrónico tal y como aparecerá para los usuarios en sus dispositivos",
- "emailAddressAttribute": "Atributo de dirección de correo electrónico del id. de Microsoft Entra",
- "emailAddressInfoBalloon": "Especifique la dirección de correo electrónico que se usará para enviar y recibir correo electrónico",
- "emailServer": "Servidor de correo electrónico",
- "emailServerHint": "Por ejemplo, mail.contoso.com",
- "emailServerInfoBalloon": "Especifique el nombre de host del servidor de Exchange",
- "enable": "Habilitar",
- "enableSMime": "Habilitar S/MIME",
- "enabled": "Habilitada",
- "encryptAllEmails": "Cifrar todos los correos electrónicos",
- "encryptionCertificates": "Certificados de cifrado",
- "endUserNotifications": "Notificaciones al usuario final",
- "enrollmentTypeLabel": "Tipo de inscripción del dispositivo",
- "externalRecipients": "Información sobre correo de destinatarios externos",
- "externalRecipientsInfoBalloon": "La opción Información sobre correo de destinatarios externos aparece si el remitente agrega un destinatario externo o un grupo de distribución que contiene destinatarios externos. Esta información de correo electrónico indica a los remitentes si el mensaje que redactan va a salir de la organización, lo que les ayuda a tomar las decisiones correctas respecto al lenguaje, tono y contenido. Disponible solo para las cuentas de Exchange Online y las cuentas locales que usan la autenticación moderna híbrida. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada.",
- "focusedInbox": "Bandeja de entrada Prioritarios",
- "focusedInboxInfoBalloon": "La Bandeja de entrada Prioritarios separa la bandeja de entrada en dos pestañas: Prioritarios y Otros. Los correos electrónicos más importantes están en la pestaña Prioritarios y el resto en la pestaña Otros, con acceso fácil pero por separado. Cuando la opción se define como no configurada, la configuración de la aplicación predeterminada se establece como activada. ",
- "fullScreenEnabledLabel": "Pantalla completa",
- "gmailNineAmountOfEmail": "Cantidad de correo electrónico para sincronizar",
- "gmailNineAuthenticationMethodInfoBalloon": "Seleccione cómo quiere que se autentiquen los usuarios en el servidor de correo electrónico. Use los certificados para ofrecer una experiencia totalmente segura y sin problemas a los usuarios finales. La autenticación basada en certificados no está disponible aún porque los perfiles de certificados SCEP y PKCS para los dispositivos del propietario no están disponibles. ",
- "gmailNineCertificateUPNInfoBalloon": "El certificado debe incluir el nombre principal de usuario (UPN) como nombre alternativo del firmante.",
- "gmailNineEmailAddressInfoBalloon": "El atributo Intune obtiene del identificador de Microsoft Entra para generar dinámicamente la dirección de correo electrónico que usará el perfil, por ejemplo, MyName@contoso.com (UPN). Más información sobre los atributos de Microsoft Entra para perfiles de correo electrónico.",
- "gmailNineEmailServerInfoBalloon": "Ubicación de Exchange (dirección URL) del servidor de correo electrónico a la que se conecta la aplicación que especifica para recibir correo electrónico.",
- "gmailNineEmailSynchronizeInfoBalloon": "Controla la cantidad de correo electrónico que el cliente va a sincronizar.",
- "gmailNineSSLInfoBalloon": "Habilita SSL para proteger todas las comunicaciones con el servidor de correo electrónico.",
- "gmailNineUsernameInfoBalloon": "El atributo Intune obtiene del id. de Microsoft Entra para generar dinámicamente el nombre de usuario que usará el perfil, por ejemplo, MyName@contoso.com (UPN) o MyName (nombre de usuario). Obtener más información acerca de Microsoft Entra atributos para perfiles de correo electrónico.",
- "ignoreManifestScope": "Ignorar ámbito de manifiesto",
- "ignoreVersionDetection": "Omitir la versión de la aplicación",
- "informationUrlLabel": "Dirección URL de información",
- "informationUrlSizeHint": "La longitud máxima de la dirección URL de información es de 1024 caracteres",
- "installAsManaged": "Instalar como administrado",
- "installationSourceLabel": "Tipo de aplicación",
- "installerTypeInfoBalloon": "El tipo de instalador del paquete de aplicación.",
- "installerTypeLabel": "Tipo de instalador",
- "isFeatured": "Mostrar como aplicación destacada en el Portal de empresa",
- "isMAMEnabledToggleLabel": "Sí",
- "lastModifiedDateTime": "Hora de la última actualización",
- "ldapUrl": "DIRECCIÓN URL DE LDAP",
- "licensingType": "Admite la asignación de contexto de dispositivo",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Versión mínima del sistema operativo",
- "modernAuth": "Autenticación moderna",
- "nameHint": "Escribir un nombre",
- "nameLabel": "Nombre",
- "nameSizeHint": "La longitud máxima del nombre es de 512 caracteres.",
- "notConfigured": "Sin configurar",
- "notesLabel": "Notas",
- "notesSizeHint": "El texto de notas tiene una longitud máxima de 1024 caracteres.",
- "notificationType": "Tipo de notificación",
- "oneDay": "Un día",
- "oneMonth": "Un mes",
- "oneWeek": "Una semana",
- "outlookSMimeSettings": "Configuración de S/MIME de Outlook",
- "ownerLabel": "Propietario",
- "ownerSizeHint": "El nombre del propietario tiene una longitud máxima de 256 caracteres.",
- "packageIdLabel": "Identificador del paquete",
- "packageNameLabel": "Nombre del paquete",
- "pivCredentialNotConfigured": "No ha seleccionado ningún emisor de credenciales derivadas para el inquilino, lo cual es necesario para poder aplicar esta directiva a los dispositivos correctamente.",
- "platformLabel": "Plataforma",
- "policyDescriptionLabel": "Descripción",
- "policyNameLabel": "Nombre",
- "preComposedIconEnabled": "Precompuesto",
- "primarySMTPAddress": "Dirección SMTP principal",
- "privacyUrlLabel": "Dirección URL de privacidad",
- "publisherHint": "Escribir un nombre de publicador",
- "publisherLabel": "Publicador",
- "publisherSizeHint": "El nombre del publicador debe tener entre 2 y 1024 caracteres (ambos valores incluidos).",
- "require": "Requerir",
- "requireBiometrics": "Requerir información biométrica para acceder a la aplicación",
- "sAMAccountName": "SamAccountName",
- "scopeTagsRequired": "Se necesita al menos una etiqueta de ámbito",
- "searchAppLabel": "Seleccionar aplicación",
- "searchAppLinkText": "Buscar en App Store",
- "searchWinGetPublicRepositoryLinkText": "Buscar en el repositorio de la comunidad de Administrador de paquetes de Windows",
- "searchWinGetStoreRepositoryLinkText": "Buscar en la aplicación Microsoft Store (nuevo)",
- "selectAAD": "Seleccionar un atributo de Microsoft Entra",
- "selectAppFileLabel": "Seleccionar archivo",
- "selectAppFileLinkText": "Seleccionar un archivo del paquete de aplicaciones",
- "selectAppFileToUpdateLabel": "Seleccionar un archivo para actualizar",
- "selectAuthMethod": "Seleccione un método de autenticación",
- "selectAuthType": "Seleccionar un tipo de autenticación",
- "selectCatalogAppLabel": "Seleccionar aplicación",
- "selectCatalogAppLinkText": "Buscar en el catálogo de aplicaciones empresariales",
- "selectCertificate": "Seleccionar un certificado",
- "signAllEmails": "Firmar todos los correos electrónicos",
- "signingCertificates": "Certificados de firma",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Descripción del conjunto de aplicaciones",
- "suiteNameLabel": "Nombre del conjunto de aplicaciones",
- "targetApplicationBundleIdentifier": "Identificador del lote de aplicaciones de destino",
- "targetedPlatformsLabel": "Plataforma de destino",
- "tasks": "Tareas",
- "threeDays": "Tres días",
- "totalLicenseCount": "Total de licencias",
- "twoWeeks": "Dos semanas",
- "unifiedAssignmentsLabel": "Asignar a:",
- "unlimited": "Sin límites",
- "urlHint": "Escribir una dirección URL válida",
- "useManagedBrowserHint": "Solo iOS y Android. Más información",
- "useManagedBrowserLabel": "Se necesita Managed Browser para abrir este vínculo.",
- "userPrinicipalName": "Nombre principal de usuario",
- "username": "Nombre de usuario",
- "usernameAttribute": "Atributo de nombre de usuario del id. de Microsoft Entra",
- "usernameAttributreInfoBalloon": "Especifique la entidad de seguridad de usuario del perfil de correo electrónico que se usará para autenticar la cuenta",
- "usernamePassword": "Nombre de usuario y contraseña",
- "webAppUrlHint": "Escribir una dirección URL válida que empiece por http:// o https://",
- "webAppUrlLabel": "Dirección URL de la aplicación",
- "webAppUrlSizeHint": "La longitud máxima de la URL de la aplicación es de 1024 caracteres.",
- "windowsUrlValidation": "Especifique una dirección URL válida, similar a https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "Datos XML especificados",
- "xmlFormatInvalid": "El formato de la directiva XML no es válido.",
- "xmlTooLarge": "El tamaño de entrada debe ser inferior a 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "No se pudo eliminar {0}.",
- "failureCa": "No se pudo eliminar {0} porque las directivas de CA hacen referencia a él",
- "modifying": "Eliminando {0}",
- "success": "{0} se eliminó correctamente"
- },
- "Notify": {
- "failure": "No se pudo actualizar {0}",
- "modifying": "Modificación de {0} en curso",
- "success": "Actualizadas correctamente: {0}."
- },
- "menuLabel": "Contexto de autenticación"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Obtenga más información sobre cómo solicitar métodos de autenticación satisfechos por los proveedores de federación.",
- "certificate": "Autenticación de certificado",
- "infoBubble": "Especifique un método de autenticación necesario, que el proveedor de federación debe satisfacer, como ADFS.",
- "multifactor": "Autenticación multifactor",
- "require": "Requerir método de autenticación federada (versión preliminar)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "La directiva de la sesión de explorador persistente solo funciona correctamente cuando se selecciona la opción \"Todas las aplicaciones en la nube\". Actualice la selección de las aplicaciones en la nube."
- },
- "Option": {
- "always": "Siempre persistente",
- "help": "Una sesión de explorador persistente permite que los usuarios mantengan la sesión iniciada después de cerrar y volver a abrir la ventana del explorador. \n
\n
Esta configuración funciona correctamente cuando se selecciona la opción \"Todas las aplicaciones en nube\".
\n
No afecta a la duración de los tokens ni a la configuración de la frecuencia de inicio de sesión.
\n
Invalidará la directiva \"Show option to stay signed in\" de la personalización de marca de la empresa.
\n
La opción \"Nunca persistente\" invalidará las notificaciones de SSO persistentes pasadas desde los servicios de autenticación federada.
\n
La opción \"Nunca persistente\" impedirá el SSO en los dispositivos móviles para las aplicaciones y entre las aplicaciones y el explorador móvil del usuario.
\n",
- "label": "Sesión del explorador persistente",
- "never": "Nunca persistente"
- },
- "Warning": {
- "allApps": "La sesión de explorador persistente solo funciona correctamente cuando se selecciona la opción \"Todas las aplicaciones en la nube\". Cambie la selección de las aplicaciones en la nube. Haga clic aquí para obtener más información."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Horas o días",
- "value": "Frecuencia"
- },
- "Option": {
- "Day": {
- "plural": "{0} días",
- "singular": "1 día"
- },
- "Hour": {
- "plural": "{0} horas",
- "singular": "1 hora"
- },
- "daysOption": "Días",
- "everytime": "Cada vez",
- "help": "Período de tiempo antes de que se pida a un usuario que vuelva a iniciar sesión cuando intenta acceder a un recurso. El valor predeterminado es un período acumulado de 90 días, es decir, se pedirá que los usuarios vuelvan a autenticarse la primera vez que intenten acceder a un recurso después de haber estado inactivos en la máquina durante un período de 90 días o superior.",
- "hoursOption": "Horas",
- "label": "Frecuencia de inicio de sesión",
- "placeholder": "Seleccionar unidades"
- }
- },
- "mainOption": "Modificar la duración de la sesión",
- "mainOptionHelp": "Configure la frecuencia con la que se pedirá confirmación a los usuarios y si se conservarán las sesiones del explorador. Es posible que las aplicaciones que no admiten los protocolos de autenticación moderna no cumplan estas directivas. En tal caso, póngase en contacto con el desarrollador de la aplicación."
- },
- "SingleSelectorActive": {
- "failed": "No se pueden cargar estos datos.",
- "reattempt": "Cargando datos. Reintento {0} de {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Elegir roles de directorio"
- },
- "Excluded": {
- "gridAria": "Lista de usuarios excluidos"
- },
- "Included": {
- "gridAria": "Lista de usuarios incluidos"
- },
- "Validation": {
- "customRoleIncluded": "\"Roles del directorio\" incluye al menos un rol personalizado.",
- "customRoleSelected": "Se ha seleccionado al menos un rol personalizado.",
- "failed": "Es necesario configurar \"{0}\".",
- "roles": "Seleccione por lo menos un rol.",
- "usersGroups": "Seleccione por lo menos un usuario o grupo."
- },
- "learnMore": "Controle el acceso en función de a quién se aplicará la directiva, como usuarios y grupos, identidades de carga de trabajo, roles de directorio o invitados externos."
- },
- "advancedTabText": "Avanzado",
- "allCloudAppsErrorBox": "Se debe seleccionar \"Todas las aplicaciones en la nube\" si se ha seleccionado la concesión \"Requerir cambio de contraseña\".",
- "allCloudAppsReauth": "Se debe seleccionar \"Todas las aplicaciones en la nube\" cuando se seleccionen el control de sesión \"Frecuencia de inicio de sesión (cada vez)\" y la condición \"Riesgo de inicio de sesión\"",
- "allCloudOrSpecificApps": "El control de sesión \"Frecuencia de inicio de sesión cada vez\" requiere que se seleccionen \"todas las aplicaciones en la nube\" o aplicaciones admitidas específicamente.",
- "allDayCheckboxLabel": "Todo el día",
- "allDevicePlatforms": "Cualquier dispositivo",
- "allGuestUserInfoContent": "Incluye invitados B2B de Microsoft Entra, pero no invitados de SharePoint B2B",
- "allGuestUserLabel": "Todos los usuarios externos e invitados",
- "allRiskLevelsOption": "Todos los niveles de riesgo",
- "allTrustedLocationLabel": "Todas las ubicaciones de confianza",
- "allUserGroupSetSelectorLabel": "Todos los usuarios y grupos",
- "allUsersReauth": "El control de sesión \"Frecuencia de inicio de sesión cada vez\" requiere que se seleccione \"Todos los usuarios\"",
- "allUsersString": "Todos los usuarios",
- "and": "{0} Y {1} ",
- "andWithGrouping": "({0}) Y {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Cualquier aplicación en la nube",
- "appContextOptionInfoContent": "Etiqueta de autenticación solicitada",
- "appContextOptionLabel": "Etiqueta de autenticación solicitada (versión preliminar)",
- "appContextUriPlaceholder": "Ejemplo: uri:contoso.com:level3",
- "appEnforceInfoBubble": "Es posible que las restricciones que exige la aplicación requieran opciones de configuración de administración adicionales dentro de las aplicaciones de nube. Las restricciones solo se aplicarán en sesiones nuevas.",
- "appNotSetSeletorLabel": "0 aplicaciones en la nube seleccionadas",
- "appReauthNotSupported": "Esta aplicación no admite el control de sesión \"Frecuencia de inicio de sesión cada vez\".",
- "applyConditionClientAppInfoBalloonContent": "Configurar aplicaciones cliente para aplicar la directiva a aplicaciones cliente específicas",
- "applyConditionDevicePlatformInfoBalloonContent": "Configurar plataformas de dispositivo para aplicar la directiva a plataformas específicas",
- "applyConditionDeviceStateInfoBalloonContent": "Configurar estado del dispositivo para aplicar la directiva a estados de dispositivo concretos",
- "applyConditionLocationInfoBalloonContent": "Configurar ubicaciones para aplicar la directiva a ubicaciones de confianza o que no son de confianza",
- "applyConditionSigninRiskInfoBalloonContent": "Configurar riesgo de inicio de sesión para aplicar la directiva a los niveles de riesgo seleccionados",
- "applyConditionUserRiskInfoBalloonContent": "Configurar el riesgo de usuario para aplicar la directiva a los niveles de riesgo seleccionados",
- "applyConditonLabel": "Configurar",
- "ariaLabelPolicyDisabled": "La directiva está deshabilitada",
- "ariaLabelPolicyEnabled": "La directiva está habilitada.",
- "ariaLabelPolicyReportOnly": "La directiva está en modo de solo informe.",
- "blockAccess": "Bloquear acceso",
- "builtInDirectoryRoleLabel": "Roles del directorio integrados",
- "casCustomControlInfo": "Las directivas personalizadas deben configurarse en el portal de Cloud App Security. Este control funciona de forma instantánea para las aplicaciones destacadas y puede incorporarse automáticamente en cualquier aplicación. Haga clic aquí para obtener más información sobre ambos casos.",
- "casInfoBubble": "Este control funciona para diversas aplicaciones en la nube.",
- "casPreconfiguredControlInfo": "Este control funciona de forma instantánea para las aplicaciones destacadas y puede incorporarse automáticamente en cualquier aplicación. Haga clic aquí para obtener más información sobre ambos casos.",
- "cert64DownloadCol": "Descargar certificado Base 64",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Descargar certificado",
- "certDurationCol": "Expiración",
- "certDurationStartCol": "Válido desde",
- "certName": "VpnCert",
- "certainApps": "Solo se admiten determinadas aplicaciones para la “Frecuencia de inicio de sesión (cada vez)” si no se seleccionan las concesiones “Requerir autenticación multifactor” y “Requerir cambio de contraseña”",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Elegir aplicaciones",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Aplicaciones elegidas",
- "chooseApplicationsEmpty": "No hay aplicaciones",
- "chooseApplicationsNone": "Ninguno",
- "chooseApplicationsNoneFound": "No encontramos \"{0}\". Pruebe con otro nombre o id.",
- "chooseApplicationsPlural": "{0} y {1} más",
- "chooseApplicationsReAuthEverytimeInfo": "¿Busca su aplicación? Algunas aplicaciones no se pueden usar con el control de sesión \"Requerir reautenticación cada vez\"",
- "chooseApplicationsRemove": "Quitar",
- "chooseApplicationsReturnedPlural": "Se encontraron {0} aplicaciones.",
- "chooseApplicationsReturnedSingular": "Se encontró 1 aplicación.",
- "chooseApplicationsSearchBalloon": "Escriba el nombre o el id. de una aplicación para buscarla.",
- "chooseApplicationsSearchHint": "Buscar aplicaciones...",
- "chooseApplicationsSearchLabel": "Aplicaciones",
- "chooseApplicationsSearching": "Buscando...",
- "chooseApplicationsSelect": "Seleccionar",
- "chooseApplicationsSelected": "Seleccionados",
- "chooseApplicationsSingular": "{0} y 1 más",
- "chooseApplicationsTooMany": "Se pueden mostrar más resultados. Filtre con el cuadro de búsqueda.",
- "chooseLocationCorpnetItem": "Red corporativa",
- "chooseLocationSelectedLocationsLabel": "Ubicaciones seleccionadas",
- "chooseLocationTrustedIpsItem": "Direcciones IP de confianza de la autenticación multifactor",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Elegir ubicaciones",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Ubicaciones elegidas",
- "chooseLocationsEmpty": "No hay ubicaciones",
- "chooseLocationsExcludedSelectorTitle": "Seleccionar",
- "chooseLocationsIncludedSelectorTitle": "Seleccionar",
- "chooseLocationsNone": "Ninguno",
- "chooseLocationsNoneFound": "No encontramos \"{0}\". Pruebe con otro nombre o id.",
- "chooseLocationsPlural": "{0} y {1} más",
- "chooseLocationsRemove": "Quitar",
- "chooseLocationsReturnedPlural": "{0} ubicaciones encontradas",
- "chooseLocationsReturnedSingular": "1 ubicación encontrada",
- "chooseLocationsSearchBalloon": "Escriba el nombre de una ubicación para buscarla.",
- "chooseLocationsSearchHint": "Buscar ubicaciones...",
- "chooseLocationsSearchLabel": "Ubicaciones",
- "chooseLocationsSearching": "Buscando...",
- "chooseLocationsSelect": "Seleccionar",
- "chooseLocationsSelected": "Seleccionado",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Seleccionar",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Seleccionar",
- "chooseLocationsSingular": "{0} y 1 más",
- "chooseLocationsTooMany": "Se pueden mostrar más resultados. Filtre con el cuadro de búsqueda.",
- "claimProviderAddCommandText": "Nuevo control personalizado",
- "claimProviderAddNewBladeTitle": "Nuevo control personalizado",
- "claimProviderDeleteCommand": "Eliminar",
- "claimProviderDeleteDescription": "¿Está seguro de que quiere eliminar '{0}'? Esta acción no se puede deshacer.",
- "claimProviderDeleteTitle": "¿Está seguro?",
- "claimProviderEditInfoText": "Escriba el archivo JSON de los controles personalizados que especificaron los proveedores de notificaciones.",
- "claimProviderNotificationCreateDescription": "Creando control personalizado con el nombre \"{0}\"",
- "claimProviderNotificationCreateFailedDescription": "Error al crear el control personalizado \"{0}\". Vuelva a intentarlo más tarde.",
- "claimProviderNotificationCreateFailedTitle": "No se pudo crear el control personalizado",
- "claimProviderNotificationCreateSuccessDescription": "Se creó el control personalizado con el nombre \"{0}\".",
- "claimProviderNotificationCreateSuccessTitle": "Se creó {0}.",
- "claimProviderNotificationCreateTitle": "Creando {0}",
- "claimProviderNotificationDeleteDescription": "Eliminando el control personalizado con el nombre \"{0}\"",
- "claimProviderNotificationDeleteFailedDescription": "Error al eliminar el control personalizado \"{0}\". Vuelva a intentarlo más tarde.",
- "claimProviderNotificationDeleteFailedTitle": "No se pudo eliminar el control personalizado",
- "claimProviderNotificationDeleteSuccessDescription": "Se eliminó el control personalizado con el nombre \"{0}\".",
- "claimProviderNotificationDeleteSuccessTitle": "Se eliminó '{0}'.",
- "claimProviderNotificationDeleteTitle": "Eliminando '{0}'",
- "claimProviderNotificationUpdateDescription": "Actualizando el control personalizado con el nombre \"{0}\"",
- "claimProviderNotificationUpdateFailedDescription": "Error al actualizar el control personalizado con el nombre \"{0}\". Vuelva a intentarlo más tarde.",
- "claimProviderNotificationUpdateFailedTitle": "No se pudo actualizar el control personalizado",
- "claimProviderNotificationUpdateSuccessDescription": "Se actualizó el control personalizado con el nombre \"{0}\".",
- "claimProviderNotificationUpdateSuccessTitle": "Se actualizó {0}.",
- "claimProviderNotificationUpdateTitle": "Actualizando '{0}'",
- "claimProviderValidationAppIdInvalid": "El valor \"AppId\" no es válido. Revíselo y vuelva a intentarlo.",
- "claimProviderValidationClientIdMissing": "Falta un valor \"ClientId\" en los datos. Revíselo y vuelva a intentarlo.",
- "claimProviderValidationControlClaimsRequestedMissing": "Falta un valor \"ClaimsRequested\" en \"Control\". Revíselo y vuelva a intentarlo.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "Falta un valor \"Type\" en el elemento \"ClaimsRequested\". Revíselo y vuelva a intentarlo.",
- "claimProviderValidationControlIdAlreadyExists": "El valor \"Id\" de \"Control\" ya existe. Revíselo y vuelva a intentarlo.",
- "claimProviderValidationControlIdMissing": "Falta un valor \"Id\" en \"Control\". Revíselo y vuelva a intentarlo.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "El valor \"Id\" de \"Control\" no se puede quitar porque se le hace referencia en una directiva existente. Primero, quítelo de la directiva.",
- "claimProviderValidationControlIdTooManyControls": "La propiedad \"Control\" tiene demasiados controles. Revísela y vuelva a intentarlo.",
- "claimProviderValidationControlIdValueReserved": "El valor \"Id\" de \"Control\" es una palabra clave reservada. Use otro id.",
- "claimProviderValidationControlNameAlreadyExists": "El valor \"Name\" de \"Control\" ya existe. Revíselo y vuelva a intentarlo.",
- "claimProviderValidationControlNameMissing": "Falta un valor \"Name\" en \"Control\". Revíselo y vuelva a intentarlo.",
- "claimProviderValidationControlsMissing": "Falta un valor \"Controls\" en los datos. Revíselo y vuelva a intentarlo.",
- "claimProviderValidationDiscoveryUrlMissing": "Falta un valor \"DiscoveryUrl\" en los datos. Revíselo y vuelva a intentarlo.",
- "claimProviderValidationInvalid": "Los datos proporcionados no son válidos. Revíselos y vuelva a intentarlo.",
- "claimProviderValidationInvalidJsonDefinition": "No se puede guardar el control personalizado. Revise el texto JSON y vuelva a intentarlo.",
- "claimProviderValidationNameAlreadyExists": "El valor \"Name\" ya existe. Revíselo y vuelva a intentarlo.",
- "claimProviderValidationNameMissing": "Falta un valor \"Name\" en los datos. Revíselo y vuelva a intentarlo.",
- "claimProviderValidationUnknown": "Se produjo un error desconocido al validar los datos proporcionados. Revíselo y vuelva a intentarlo.",
- "claimProvidersNone": "No hay controles personalizados.",
- "claimProvidersSearchPlaceholder": "Controles de búsqueda.",
- "classicPoilcyFilterTitle": "Mostrar",
- "classicPolicyAllPlatforms": "Todas las plataformas",
- "classicPolicyClientAppBrowserAndNative": "Explorador, aplicaciones móviles y clientes de escritorio",
- "classicPolicyCloudAppTitle": "Aplicación en la nube",
- "classicPolicyControlAllow": "Permitir",
- "classicPolicyControlBlock": "Bloquear",
- "classicPolicyControlBlockWhenNotAtWork": "Bloquear acceso cuando no está en el trabajo",
- "classicPolicyControlRequireCompliantDevice": "Requerir dispositivo compatible",
- "classicPolicyControlRequireDomainJoinedDevice": "Requerir dispositivo unido al dominio",
- "classicPolicyControlRequireMfa": "Requerir autenticación multifactor",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Requerir autenticación multifactor fuera del trabajo",
- "classicPolicyDeleteCommand": "Eliminar",
- "classicPolicyDeleteFailTitle": "No se pudo eliminar la directiva clásica",
- "classicPolicyDeleteInProgressTitle": "Eliminando la directiva clásica",
- "classicPolicyDeleteSuccessTitle": "Directiva clásica eliminada",
- "classicPolicyDetailBladeTitle": "Detalles",
- "classicPolicyDisableCommand": "Deshabilitar",
- "classicPolicyDisableConfirmation": "¿Seguro que quiere deshabilitar \"{0}\"? Esta acción no se puede deshacer.",
- "classicPolicyDisableFailDescription": "No se pudo deshabilitar \"{0}\".",
- "classicPolicyDisableFailTitle": "No se pudo deshabilitar la directiva clásica",
- "classicPolicyDisableInProgressDescription": "Deshabilitando \"{0}\"",
- "classicPolicyDisableInProgressTitle": "Deshabilitando la directiva clásica",
- "classicPolicyDisableSuccessDescription": "\"{0}\" se deshabilitó correctamente.",
- "classicPolicyDisableSuccessTitle": "Directiva clásica deshabilitada",
- "classicPolicyEasSupportedPlatforms": "Plataformas compatibles con Exchange ActiveSync",
- "classicPolicyEasUnsupportedPlatforms": "Plataformas no compatibles con Exchange ActiveSync",
- "classicPolicyExcludedPlatformsTitle": "Plataformas de dispositivos excluidas",
- "classicPolicyFilterAll": "Todas las directivas",
- "classicPolicyFilterDisabled": "Directivas deshabilitadas",
- "classicPolicyFilterEnabled": "Directivas habilitadas",
- "classicPolicyIncludeExcludeMembersDescription": "Al excluir grupos, puede realizar una migración por fases de las directivas.",
- "classicPolicyIncludeExcludeMembersTitle": "Incluir o excluir grupos",
- "classicPolicyIncludedPlatformsTitle": "Plataformas de dispositivo incluidas",
- "classicPolicyManualMigrationMessage": "Esta directiva debe migrarse manualmente.",
- "classicPolicyMigrateCommand": "Migrar",
- "classicPolicyMigrateConfirmation": "¿Seguro que quiere migrar \"{0}\"? Esta directiva solo se puede migrar una vez.",
- "classicPolicyMigrateFailDescription": "No se pudo migrar \"{0}\".",
- "classicPolicyMigrateFailTitle": "No se pudo migrar la directiva clásica",
- "classicPolicyMigrateInProgressDescription": "Migrando \"{0}\"",
- "classicPolicyMigrateInProgressTitle": "Migrando directiva clásica",
- "classicPolicyMigrateRecommendText": "Recomendación: Migre a las nuevas directivas de Azure Portal.",
- "classicPolicyMigrateSuccessTitle": "La directiva clásica se migró correctamente",
- "classicPolicyMigratedSuccessDescription": "Esta directiva clásica ahora puede administrarse en Directivas.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "Esta directiva clásica se migra en forma de {0} directivas nuevas. Las nuevas directivas pueden administrarse en Directivas.",
- "classicPolicyNoEditPermissionMsg": "No tiene permiso para editar esta directiva. Solo los administradores globales y los administradores de seguridad pueden editarla. Haga clic aquí para obtener más información.",
- "classicPolicySaveFailDescription": "No se pudo guardar \"{0}\".",
- "classicPolicySaveFailTitle": "No se pudo guardar la directiva clásica",
- "classicPolicySaveInProgressDescription": "Guardando \"{0}\"",
- "classicPolicySaveInProgressTitle": "Guardando la directiva clásica",
- "classicPolicySaveSuccessDescription": "\"{0}\" se guardó correctamente.",
- "classicPolicySaveSuccessTitle": "Directiva clásica guardada",
- "clientAppBladeLegacyInfoBanner": "La autenticación heredada no se admite actualmente.",
- "clientAppBladeLegacyUpsellBanner": "Bloqueo de aplicaciones cliente no compatibles (versión preliminar)",
- "clientAppBladeTitle": "Aplicaciones cliente",
- "clientAppDescription": "Seleccionar aplicaciones cliente a las que se aplicará la directiva",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync no admite actualmente todas las demás condiciones.",
- "clientAppLearnMore": "Controle el acceso de los usuarios a aplicaciones cliente específicas que no usan la autenticación moderna.",
- "clientAppLegacyHeader": "Clientes de autenticación heredada",
- "clientAppMobileDesktop": "Aplicaciones móviles y aplicaciones de escritorio",
- "clientAppModernHeader": "Clientes de autenticación moderna",
- "clientAppOnlySupportedPlatforms": "Aplicar directiva solo en las plataformas compatibles",
- "clientAppSelectSpecificClientApps": "Seleccionar aplicaciones cliente",
- "clientAppWebBrowser": "Explorador",
- "clientAppsSelectedLabel": "{0} incluido",
- "clientTypeBrowser": "Navegador",
- "clientTypeEas": "Clientes de Exchange ActiveSync",
- "clientTypeEasInfo": "Clientes de Exchange ActiveSync que solo usan la autenticación heredada.",
- "clientTypeModernAuth": "Clientes de autenticación moderna",
- "clientTypeOtherClients": "Otros clientes",
- "clientTypeOtherClientsInfo": "Aquí se incluyen clientes de Office antiguos y otros protocolos de correo (POP, IMAP, SMTP, etc.). [Más información][1]\n[1]: https://aka.ms/caclientapps.\n",
- "cloudAppCountDiffBannerText": "Se han eliminado del directorio {0} aplicaciones en la nube configuradas en la directiva, pero esto no afectará a otras aplicaciones que estén en ella. La próxima vez que actualice la sección de aplicaciones de la directiva, se quitarán automáticamente las aplicaciones que haya eliminado.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Todas las aplicaciones de Microsoft",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Permitir aplicaciones móviles, de escritorio y en la nube de Microsoft (versión preliminar)",
- "cloudappsSelectionBladeAllCloudapps": "Todas las aplicaciones en la nube",
- "cloudappsSelectionBladeExcludeDescription": "Seleccionar las aplicaciones en la nube que quedarán exentas de la directiva",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Seleccionar las aplicaciones en la nube excluidas",
- "cloudappsSelectionBladeIncludeDescription": "Seleccionar las aplicaciones en la nube a las que se aplicará esta directiva",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Seleccionar",
- "cloudappsSelectionBladeSelectedCloudapps": "Seleccionar aplicaciones",
- "cloudappsSelectorInfoBallonText": "Servicios a los que el usuario obtiene acceso para hacer trabajos. Por ejemplo, 'Salesforce'.",
- "cloudappsSelectorPluralExcluded": "{0} aplicaciones excluidas",
- "cloudappsSelectorPluralIncluded": "{0} aplicaciones incluidas",
- "cloudappsSelectorSingularExcluded": "1 aplicación excluida",
- "cloudappsSelectorSingularIncluded": "1 aplicación incluida",
- "cloudappsSelectorUserPlural": "{0} aplicaciones",
- "cloudappsSelectorUserSingular": "1 aplicación",
- "conditionLabelMulti": "{0} condiciones seleccionadas",
- "conditionLabelOne": "1 condición seleccionada",
- "conditionalAccessBladeTitle": "Acceso condicional",
- "conditionsNotSelectedLabel": "Sin configurar",
- "conditionsReqMfaReauthSet": "Algunas opciones no están disponibles debido a que la concesión “Requerir autenticación multifactor\" y el control de sesión “Frecuencia de inicio de sesión (cada vez)” están seleccionados actualmente",
- "conditionsReqPwSet": "Algunas opciones no están disponibles debido a que la concesión \"Requerir cambio de contraseña\" se está seleccionando actualmente.",
- "configureCasText": "Configurar Cloud App Security",
- "configureCustomControlsText": "Configurar una directiva personalizada",
- "controlLabelMulti": "{0} controles seleccionados",
- "controlLabelOne": "1 control seleccionado",
- "controlValidatorText": "Seleccione al menos un control.",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Obtenga más información sobre cómo solicitar dispositivos compatibles.",
- "controlsDeviceComplianceInfoBubble": "El dispositivo debe ser compatible con Intune. Si el dispositivo no es compatible, se pedirá al usuario que lo haga compatible.",
- "controlsDomainJoinedAriaLabel": "Obtenga más información sobre cómo requerir dispositivos híbridos unidos a Microsoft Entra.",
- "controlsDomainJoinedInfoBubble": "Los dispositivos deben estar unidos a Microsoft Entra híbrido.",
- "controlsMamAriaLabel": "Obtenga más información sobre cómo solicitar aplicaciones cliente aprobadas.",
- "controlsMamInfoBubble": "El dispositivo debe usar estas aplicaciones cliente aprobadas.",
- "controlsMfaInfoBubble": "El usuario debe completar los requisitos de seguridad adicionales, como llamada de teléfono o mensaje de texto.",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Obtenga más información sobre cómo solicitar aplicaciones protegidas por directivas.",
- "controlsRequireCompliantAppInfoBubble": "El dispositivo debe usar las aplicaciones protegidas por directivas.",
- "controlsRequirePasswordResetAriaLabel": "Obtenga más información sobre cómo solicitar un cambio de contraseña.",
- "controlsRequirePasswordResetInfoBubble": "Requiera cambio de contraseña para reducir el riesgo de usuario. Esta opción también requiere la autenticación multifactor. No se pueden usar otros controles.",
- "countriesRadiobuttonInfoBalloonContent": "El país o la región de procedencia de un inicio de sesión se determina a partir de la dirección IP del usuario.",
- "createNewVpnCert": "Nuevo certificado",
- "createdTimeLabel": "Hora de creación",
- "customRoleLabel": "Roles personalizados (no se admite)",
- "dateRangeTypeLabel": "Intervalo de fechas",
- "daysOfWeekPlaceholderText": "Filtrar días de la semana",
- "daysOfWeekTypeLabel": "Días de la semana",
- "deletePolicyNoLicenseText": "Ya puede eliminar esta directiva. Una vez eliminada, no podrá volver a crearla hasta que disponga de las licencias necesarias.",
- "descriptionContentForControlsAndOr": "Para varios controles",
- "devicePlatform": "Plataforma de dispositivo",
- "devicePlatformConditionHelpDescription": "Permite aplicar la directiva a las plataformas de dispositivos seleccionadas.\n[Más información][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} incluido",
- "devicePlatformIncludeExclude": "{0} y {1} excluidos",
- "devicePlatformNoSelectionError": "Para seleccionar plataformas de dispositivo, es necesario seleccionar un elemento secundario.",
- "devicePlatformsNone": "Ninguno",
- "deviceSelectionBladeExcludeDescription": "Seleccionar las plataformas que quedarán exentas de la directiva",
- "deviceSelectionBladeIncludeDescription": "Seleccionar las plataformas de dispositivo que quiere incluir en esta directiva",
- "deviceStateAll": "Todos los estados de dispositivo",
- "deviceStateCompliant": "Dispositivo marcado como compatible",
- "deviceStateCompliantInfoContent": "Los dispositivos compatibles con Intune se excluirán de la evaluación de esta directiva, de modo que si, por ejemplo, la directiva bloquea el acceso, bloqueará todos los dispositivos excepto los compatibles con Intune.",
- "deviceStateConditionConfigureInfoContent": "Configurar directiva basada en el estado del dispositivo",
- "deviceStateConditionSelectorInfoContent": "Si el dispositivo desde el que el usuario inicia sesión está \"Unido a Microsoft Entra híbrido\" o \"marcado como compatible\".\n Esto ha quedado en desuso. Use \"{1}\" en su lugar.",
- "deviceStateConditionSelectorLabel": "Estado del dispositivo (en desuso)",
- "deviceStateDomainJoined": "Dispositivo unido a Microsoft Entra híbrido",
- "deviceStateDomainJoinedInfoContent": "Los dispositivos unidos a Microsoft Entra híbrido se excluirán de la evaluación de esta directiva, por lo que, por ejemplo, si la directiva bloquea el acceso, bloqueará todos los dispositivos excepto los dispositivos unidos a Microsoft Entra híbrido.",
- "deviceStateDomainJoinedInfoLinkText": "Más información.",
- "deviceStateExcludeDescription": "Seleccione la condición de estado del dispositivo que se usará para excluir dispositivos de la directiva.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} y excluir {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} y excluir {1}, {2}",
- "directoryRoleInfoContent": "Asigne la directiva a roles del directorio integrados.",
- "directoryRolesLabel": "Roles del directorio",
- "discardbutton": "Descartar",
- "downloadDefaultFileName": "Intervalos IP",
- "downloadExampleFileName": "Ejemplo",
- "downloadExampleHeader": "Este es un archivo de ejemplo con demostraciones de los tipos de datos que se pueden aceptar. Se ignorarán las líneas que comiencen por #.",
- "duplicate": "Duplicado",
- "duplicatePolicyName": "COPIAR {0}",
- "endDatePickerLabel": "Extremos",
- "endTimePickerLabel": "Hora de finalización",
- "enterCountryText": "La dirección IP y el país o región se evalúan en un par. Seleccione el país o región.",
- "enterIpText": "Dirección IP y País o región se evalúan en un par. Escriba la dirección IP.",
- "enterUserText": "No hay ningún usuario seleccionado. Seleccione uno.",
- "evaluationResult": "Resultado de la evaluación",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync solo con plataformas admitidas",
- "excludeAllTrustedLocationSelectorText": "todas las ubicaciones de confianza",
- "featureRequiresP2": "Esta característica requiere una licencia de Microsoft Entra ID P2.",
- "friday": "Viernes",
- "grantControls": "Conceder controles",
- "gridNetworkTrusted": "De confianza",
- "gridPolicyCreatedDateTime": "Fecha de creación",
- "gridPolicyEnabled": "Habilitado",
- "gridPolicyModifiedDateTime": "Fecha de modificación",
- "gridPolicyName": "Nombre de directiva",
- "gridPolicyState": "Estado",
- "groupSelectionBladeExcludeDescription": "Permite seleccionar los grupos que quedarán exentos de la directiva.",
- "groupSelectionBladeExcludedSelectorTitle": "Seleccione los grupos excluidos",
- "groupSelectionBladeSelect": "Seleccionar grupos",
- "groupSelectorInfoBallonText": "Grupos del directorio a los que se aplica la directiva. Por ejemplo, \"Grupo piloto\".",
- "groupsSelectionBladeTitle": "Grupos",
- "helpCommonScenariosText": "¿Le interesan los escenarios comunes?",
- "helpCondition1": "Cuando cualquier usuario está fuera de la red de la compañía",
- "helpCondition2": "Cuando inician sesión usuarios del grupo \"Administradores\"",
- "helpConditionsTitle": "Condiciones",
- "helpControl1": "Es necesario que inicien sesión con la autenticación multifactor",
- "helpControl2": "Es necesario que dispongan de un dispositivo unido a un dominio o conforme a Intune.",
- "helpControlsTitle": "Controles",
- "helpIntroText": "El acceso condicional le permite aplicar los requisitos de acceso cuando se cumplen determinadas condiciones. Veamos algunos ejemplos.",
- "helpIntroTitle": "¿Qué es el acceso condicional?",
- "helpLearnMoreText": "¿Quiere obtener más información acerca del acceso condicional?",
- "helpStartStep1": "Haga clic en \"+ Nueva directiva\" para crear su primera directiva.",
- "helpStartStep2": "Especifique las condiciones y los controles de la directiva.",
- "helpStartStep3": "Cuando haya terminado, no se olvide de las opciones Habilitar la directiva y Crear.",
- "helpStartTitle": "Introducción",
- "highRisk": "Alta",
- "includeAndExcludeAppsTextFormat": "Incluir: {0}. Excluir: {1}.",
- "includeAppsTextFormat": "Incluir: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Las áreas desconocidas son direcciones IP que no se pueden asignar a ningún país o región.",
- "includeUnknownAreasCheckboxLabel": "Incluir áreas desconocidas",
- "infoCommandLabel": "Información",
- "invalidCertDuration": "La duración del certificado no es válida,",
- "invalidIpAddress": "El valor debe ser una dirección IP válida.",
- "invalidReAuthSignInRiskOptionSelected": "El control de sesión \"frecuencia de inicio de sesión cada vez\" no permite la selección \"sin riesgo\" en el control de condición \"riesgo de inicio de sesión\".",
- "invalidUriErrorMsg": "Escriba un URI válido. Por ejemplo: \"uri:contoso.com:acr\". ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Cargar todo",
- "loading": "Cargando...",
- "locationConfigureNamedLocationsText": "Configurar todas las ubicaciones de confianza",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "El nombre de la ubicación es demasiado largo. Debe tener 256 caracteres como máximo.",
- "locationSelectionBladeExcludeDescription": "Seleccionar las ubicaciones que quedarán exentas de la directiva",
- "locationSelectionBladeIncludeDescription": "Seleccionar las ubicaciones que se incluirán en la directiva",
- "locationsAllLocationsLabel": "Cualquier ubicación",
- "locationsAllNamedLocationsLabel": "Todas las direcciones IP de confianza",
- "locationsAllPrivateLinksLabel": "Todos los Private Links en mi inquilino",
- "locationsIncludeExcludeLabel": "{0} y excluir todas las IP de confianza",
- "locationsSelectedPrivateLinksLabel": "Private Links seleccionados",
- "lowRisk": "Baja",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "Para administrar las directivas de acceso condicional, su organización necesita el id. P1 o P2 de Microsoft Entra.",
- "manageSecurityDefaultsAriaLabel": "Administre la configuración de los valores predeterminados de seguridad.",
- "markAsTrustedCheckboxInfoBalloonContent": "Iniciar sesión desde una ubicación de confianza reduce el riesgo de inicio de sesión de un usuario. Marque esta ubicación como de confianza solo si sabe que los intervalos IP especificados están establecidos y son confiables en su organización.",
- "markAsTrustedCheckboxLabel": "Marcar como ubicación de confianza",
- "mediumRisk": "Mediana",
- "memberSelectionCommandRemove": "Quitar",
- "menuItemClaimProviderControls": "Controles personalizados (versión preliminar)",
- "menuItemClassicPolicies": "Directivas clásicas",
- "menuItemInsightsAndReporting": "Conclusiones e informes",
- "menuItemManage": "Administrar",
- "menuItemNamedLocationsPreview": "Ubicaciones con nombre (versión preliminar)",
- "menuItemNamedNetworks": "Ubicaciones con nombre",
- "menuItemPolicies": "Directivas",
- "menuItemTermsOfUse": "Términos de uso",
- "modifiedTimeLabel": "Hora de modificación",
- "monday": "Lunes",
- "nameLabel": "Nombre",
- "namedLocationCountryInfoBanner": "A los países o regiones solo se les pueden asignar direcciones IPv4. Las direcciones IPv6 están incluidas en países o regiones desconocidos.",
- "namedLocationTypeCountry": "Países/regiones",
- "namedLocationTypeLabel": "Defina la ubicación con:",
- "namedLocationUpsellBanner": "Esta vista está en desuso. Vaya a la vista nueva y mejorada \"ubicaciones con nombre\".",
- "namedLocationsHelpDescription": "Los informes de seguridad de Microsoft Entra ID usan ubicaciones con nombre para reducir los falsos positivos y las directivas de acceso condicional de Microsoft Entra.\n[Más información][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Agregue un nuevo intervalo IP (p. ej., 40.77.182.32/27).",
- "namedNetworkCountryNeeded": "Debe seleccionar, al menos, un país o región.",
- "namedNetworkDeleteCommand": "Eliminar",
- "namedNetworkDeleteDescription": "¿Está seguro de que quiere eliminar '{0}'? Esta acción no se puede deshacer.",
- "namedNetworkDeleteTitle": "¿Está seguro?",
- "namedNetworkDownloadIpRange": "Descargar",
- "namedNetworkInvalidRange": "El valor debe ser un intervalo IP válido.",
- "namedNetworkIpRangeNeeded": "Necesita al menos un intervalo IP válido.",
- "namedNetworkIpRangesDescriptionContent": "Configure los intervalos IP de su organización.",
- "namedNetworkIpRangesTab": "Intervalos IP",
- "namedNetworkListAdd": "Nueva ubicación",
- "namedNetworkListConfigureTrustedIps": "Configuración de las direcciones IP de confianza de la autenticación multifactor",
- "namedNetworkNameDescription": "Ejemplo: 'Oficina de Redmond'",
- "namedNetworkNameInvalid": "El nombre proporcionado no es válido.",
- "namedNetworkNameRequired": "Debe proporcionar un nombre para esta ubicación.",
- "namedNetworkNoIpRanges": "No hay intervalos IP",
- "namedNetworkNotificationCreateDescription": "Creando ubicación con el nombre '{0}'",
- "namedNetworkNotificationCreateFailedDescription": "Error al crear la ubicación '{0}'. Vuelva a intentarlo más tarde.",
- "namedNetworkNotificationCreateFailedTitle": "No se puede crear la ubicación.",
- "namedNetworkNotificationCreateSuccessDescription": "Ubicación con el nombre '{0}' creada",
- "namedNetworkNotificationCreateSuccessTitle": "Se creó {0}.",
- "namedNetworkNotificationCreateTitle": "Creando {0}",
- "namedNetworkNotificationDeleteDescription": "Eliminando ubicación con el nombre '{0}'",
- "namedNetworkNotificationDeleteFailedDescription": "Error al eliminar la ubicación '{0}'. Vuelva a intentarlo más tarde.",
- "namedNetworkNotificationDeleteFailedTitle": "No se puede eliminar la ubicación.",
- "namedNetworkNotificationDeleteSuccessDescription": "Ubicación con el nombre '{0}' eliminada",
- "namedNetworkNotificationDeleteSuccessTitle": "Se eliminó '{0}'.",
- "namedNetworkNotificationDeleteTitle": "Eliminando '{0}'",
- "namedNetworkNotificationUpdateDescription": "Actualizando ubicación con el nombre '{0}'",
- "namedNetworkNotificationUpdateFailedDescription": "Error al actualizar la ubicación '{0}'. Vuelva a intentarlo más tarde.",
- "namedNetworkNotificationUpdateFailedTitle": "No se puede actualizar la ubicación.",
- "namedNetworkNotificationUpdateSuccessDescription": "Ubicación con el nombre '{0}' actualizada",
- "namedNetworkNotificationUpdateSuccessTitle": "Se actualizó {0}.",
- "namedNetworkNotificationUpdateTitle": "Actualizando '{0}'",
- "namedNetworkSearchPlaceholder": "Buscar ubicaciones.",
- "namedNetworkUploadFailedDescription": "Se produjo un error al analizar el archivo suministrado. Asegúrese de cargar un archivo sin formato con cada línea en el formato CIDR.",
- "namedNetworkUploadFailedTitle": "No se pudo analizar \"{0}\"",
- "namedNetworkUploadInProgressDescription": "Intentando analizar los valores de CIDR válidos de \"{0}\".",
- "namedNetworkUploadInProgressTitle": "Analizando \"{0}\"",
- "namedNetworkUploadInvalidDescription": "\"{0}\" es demasiado grande o tiene un formato no válido.",
- "namedNetworkUploadInvalidTitle": "\"{0}\" no válido",
- "namedNetworkUploadIpRange": "Cargar",
- "namedNetworkUploadSuccessDescription": "Se analizaron {0} líneas. {1} tienen un formato erróneo y {2} se omitieron.",
- "namedNetworkUploadSuccessTitle": "Se finalizó el análisis de \"{0}\"",
- "namedNetworksAdd": "Nueva ubicación con nombre",
- "namedNetworksConditionHelpDescription": "Controle el acceso del usuario en función de su ubicación física.\n[Más información][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} y {1} excluidos",
- "namedNetworksHelpDescription": "Los informes de seguridad del id. de Microsoft Entra usan ubicaciones con nombre para reducir los falsos positivos y las directivas de acceso condicional de Microsoft Entra.\n[Obtener más información][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} incluido",
- "namedNetworksNone": "No se han encontrado ubicaciones con nombre.",
- "namedNetworksTitle": "Configurar ubicaciones",
- "namednetworkExceedingSizeErrorBladeTitle": "Detalles del error",
- "namednetworkExceedingSizeErrorDetailText": "Haga clic aquí para obtener más detalles.",
- "namednetworkExceedingSizeErrorMessage": "Ha superado el almacenamiento máximo permitido para las ubicaciones con nombre. Vuelva a intentarlo con una lista más corta. Haga clic aquí para ver más detalles.",
- "needMfaSecondary": "Se tiene que seleccionar “Requerir autenticación multifactor” cuando se seleccione “Frecuencia de inicio de sesión (cada vez)” junto a “Solo métodos de autenticación secundarios”",
- "needMfaSpecificApps": "El control de sesión \"Frecuencia de inicio de sesión cada vez\" requiere el control de concesión \"Requerir autenticación multifactor\" cuando se seleccionan aplicaciones admitidas específicamente",
- "newCertName": "nuevo certificado",
- "noAttributePermissionsError": "Privilegios insuficientes para crear o actualizar la directiva. El rol lector de definición de atributos es necesario para agregar o editar filtros dinámicos.",
- "noPolicyRowMessage": "No hay directivas.",
- "noSPSelected": "Ninguna entidad de servicio seleccionada",
- "noUpdatePermissionMessage": "No tiene permiso para actualizar esta configuración. Póngase en contacto con el administrador global para obtener acceso.",
- "noUserSelected": "Ningún usuario seleccionado",
- "noneRisk": "Sin riesgo",
- "office365Description": "Estas aplicaciones incluyen, entre otras, Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online y Office 365 Yammer.",
- "office365InfoBox": "Al menos una de las aplicaciones seleccionadas es parte de Office 365. Se recomienda establecer la directiva en la aplicación de Office 365 en su lugar.",
- "oneUserSelected": "1 usuario seleccionado",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Solo los administradores globales pueden guardar esta directiva.",
- "or": "{0} O {1} ",
- "pickerDoneCommand": "Listo",
- "policiesBladeAdPremiumUpsellBannerText": "Crear sus propias directivas y dirigir condiciones específicas, como aplicaciones en la nube, riesgo de inicio de sesión y plataformas de dispositivos con el id. de Microsoft Entra Premium",
- "policiesBladeTitle": "Directivas",
- "policiesBladeTitleWithAppName": "Directivas: {0}",
- "policiesDisabledBannerText": "No se permite crear ni editar directivas para las aplicaciones que tengan un atributo de inicio de sesión vinculado.",
- "policiesHitMaxLimitStatusBarMessage": "Ha alcanzado el número máximo de directivas para este inquilino. Para poder crear más, primero deberá eliminar algunas.",
- "policyAssignmentsSection": "Tareas",
- "policyBlockAllInfoBox": "La directiva configurada bloqueará a todos los usuarios, por lo que no se admite. Revise las asignaciones y los controles. Excluya el usuario actual {0} si desea guardar esta directiva.",
- "policyCloudAppsDisplayTextAllApp": "Todas las aplicaciones",
- "policyCloudAppsLabel": "Aplicaciones en la nube",
- "policyConditionClientAppDescription": "Software que usa el usuario para obtener acceso a la aplicación en la nube. Por ejemplo, 'Navegador'.",
- "policyConditionClientAppV2Description": "Software que usa el usuario para obtener acceso a la aplicación en la nube. Por ejemplo, 'Navegador'.",
- "policyConditionDevicePlatform": "Plataformas de dispositivo",
- "policyConditionDevicePlatformDescription": "Plataforma desde la que inicia sesión el usuario. Por ejemplo, 'iOS'.",
- "policyConditionLocation": "Ubicaciones",
- "policyConditionLocationDescription": "Ubicación (determinada con el intervalo de direcciones IP) desde la que inicia sesión el usuario",
- "policyConditionLocationPreview": "Ubicaciones (versión preliminar)",
- "policyConditionSigninRisk": "Riesgo de inicio de sesión",
- "policyConditionSigninRiskDescription": "Probabilidad de que el inicio de sesión proceda de otra persona que no sea el usuario. El nivel de riesgo puede ser alto, medio o bajo. Requiere una licencia de Microsoft Entra ID P2.",
- "policyConditionUserRisk": "Riesgo de usuario",
- "policyConditionUserRiskDescription": "Configure los niveles de riesgo de usuario necesarios para aplicar la directiva.",
- "policyConditioniClientApp": "Aplicaciones cliente",
- "policyControlAllowAccessDisplayedName": "Conceder acceso",
- "policyControlAuthenticationStrengthDisplayedName": "Requerir intensidad de autenticación (versión preliminar)",
- "policyControlBladeTitle": "Conceder",
- "policyControlBlockAccessDisplayedName": "Bloquear acceso",
- "policyControlCompliantDeviceDisplayedName": "Requerir que el dispositivo esté marcado como compatible",
- "policyControlContentDescription": "Aplique controles de acceso para bloquear o conceder acceso.",
- "policyControlInfoBallonText": "Bloquear acceso o seleccionar los requisitos adicionales que se deben cumplir para conceder acceso",
- "policyControlMfaChallengeDisplayedName": "Requerir autenticación multifactor",
- "policyControlRequireCompliantAppDisplayedName": "Requerir directiva de protección de aplicaciones",
- "policyControlRequireDomainJoinedDisplayedName": "Requerir dispositivo unido a Microsoft Entra híbrido",
- "policyControlRequireMamDisplayedName": "Requerir aplicación cliente aprobada",
- "policyControlRequiredPasswordChangeDisplayedName": "Requerir cambio de contraseña",
- "policyControlSelectAuthStrength": "Requerir intensidad de autenticación",
- "policyControlsNoControlsSelected": "0 controles seleccionados",
- "policyControlsSection": "Controles de acceso",
- "policyCreatBladeTitle": "Nueva",
- "policyCreateButton": "Crear",
- "policyCreateFailedMessage": "Error: {0}",
- "policyCreateFailedTitle": "No se pudo crear \"{0}\"",
- "policyCreateInProgressTitle": "Creando {0}",
- "policyCreateSuccessMessage": "\"{0}\" se creó correctamente. La directiva se habilitará dentro de unos minutos si tiene la opción \"Habilitar directiva\" establecida en \"Activado\".",
- "policyCreateSuccessTitle": "\"{0}\" se creó correctamente",
- "policyDeleteConfirmation": "¿Está seguro de que quiere eliminar '{0}'? Esta acción no se puede deshacer.",
- "policyDeleteFailTitle": "No se pudo eliminar '{0}'.",
- "policyDeleteInProgressTitle": "Eliminando '{0}'",
- "policyDeleteSuccessTitle": "'{0}' se eliminó correctamente.",
- "policyEnforceLabel": "Habilitar directiva",
- "policyErrorCannotSetSigninRisk": "No tiene permiso para guardar una directiva con una condición de riesgo de inicio de sesión.",
- "policyErrorNoPermission": "No tiene permiso para guardar la directiva. Póngase en contacto con el administrador global.",
- "policyErrorUnknown": "Se ha producido un error; inténtelo de nuevo más tarde.",
- "policyFallbackWarningMessage": "No se pudo crear o actualizar \"{0}\" mediante MS Graph que da lugar a un retorno a AD Graph. Investigue el siguiente escenario, ya que lo más probable es que haya un error al llamar al punto final de la directiva para MS Graph con una condición incompatible.",
- "policyFallbackWarningTitle": "Se realizó correctamente una parte de la creación o actualización de \"{0}\"",
- "policyNameCannotBeEmpty": "El nombre de directiva no puede estar vacío.",
- "policyNameDevice": "Directiva de dispositivo",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Directiva de administración de aplicaciones móviles",
- "policyNameMfaLocation": "Autenticación multifactor y directiva de ubicación",
- "policyNamePlaceholderText": "Ejemplo: 'directiva de aplicaciones de cumplimiento de dispositivos'",
- "policyNameTooLongError": "El nombre de la directiva es demasiado largo. Debe tener 256 caracteres como máximo.",
- "policyOff": "Desactivado",
- "policyOn": "Activado",
- "policyReportOnly": "Solo informe",
- "policyReviewSection": "Revisar",
- "policySaveButton": "Guardar",
- "policyStatusIconDescription": "La directiva está habilitada.",
- "policyStatusIconEnabled": "Icono de estado habilitado",
- "policyTemplateName1": "Usar las restricciones que exige la aplicación en el acceso al navegador para {0}",
- "policyTemplateName2": "Permitir que {0} acceda solo a dispositivos administrados",
- "policyTemplateName3": "Directiva migrada desde la configuración de la Evaluación continua de acceso",
- "policyTriggerRiskSpecific": "Seleccionar un nivel de riesgo específico",
- "policyTriggersInfoBalloonText": "Condiciones que definen cuándo se aplicará la directiva. Por ejemplo, 'ubicación'.",
- "policyTriggersNoConditionsSelected": "0 condiciones seleccionadas",
- "policyTriggersSelectorLabel": "Condiciones",
- "policyUpdateFailedMessage": "Error: {0}",
- "policyUpdateFailedTitle": "No se pudo actualizar {0}",
- "policyUpdateInProgressTitle": "Actualizando {0}",
- "policyUpdateSuccessMessage": "{0} se actualizó correctamente. La directiva se habilitará dentro de unos minutos si tiene la opción \"Habilitar directiva\" establecida en \"Activado\".",
- "policyUpdateSuccessTitle": "{0} se ha actualizado correctamente",
- "primaryCol": "Principal",
- "privateLinkLabel": "Private Link de Microsoft Entra ID",
- "reportOnlyInfoBox": "Modo de solo informe: las directivas se evalúan y se registran al iniciar sesión, pero no afectan a los usuarios.",
- "requireAllControlsText": "Requerir todos los controles seleccionados",
- "requireCompliantDevice": "Requerir dispositivo compatible",
- "requireDomainJoined": "Se necesita un dispositivo unido a un dominio.",
- "requireGrantReauth": "El control de sesión “Frecuencia de inicio de sesión (cada vez)” requiere un control de concesión “Requerir autenticación multifactor” o “Requerir cambio de contraseña” cuando se selecciona “Todas las aplicaciones en la nube”",
- "requireMFA": "Requerir autenticación multifactor",
- "requireMfaReauth": "El control de sesión “Frecuencia de inicio de sesión (cada vez)” requiere el control de concesión “Requerir autenticación multifactor” para “Riesgo de inicio de sesión”",
- "requireOneControlText": "Requerir uno de los controles seleccionados",
- "requirePasswordChangeReauth": "El control de sesión \"Frecuencia de inicio de sesión cada vez\" requiere el control de concesión \"requerir cambio de contraseña\" para \"riesgo de usuario\".",
- "requireRiskReauth": "El control de sesión \"frecuencia de inicio de sesión cada vez\" requiere el control de sesión \"riesgo de usuario\" o \"riesgo de inicio de sesión\" cuando se selecciona \"todas las aplicaciones en la nube\".",
- "requireRiskReauthRiskNotEnabled": "El control de sesión \"Frecuencia de inicio de sesión (cada vez)\" no está disponible cuando la opción \"Todas las aplicaciones en la nube\" está seleccionada.",
- "requireRiskReauthSignInOnly": "El control de sesión \"Frecuencia de inicio de sesión (cada vez)\" requiere el control de sesión \"Riesgo de inicio de sesión\" cuando la opción \"Todas las aplicaciones en la nube\" está seleccionada.",
- "requireRiskReauthUserOnly": "El control de sesión \"Frecuencia de inicio de sesión (cada vez)\" requiere el control de sesión \"Riesgo de usuario\" cuando la opción \"Todas las aplicaciones en la nube\" está seleccionada.",
- "resetFilters": "Restablecer filtros",
- "sPRequired": "Se requiere una entidad de servicio",
- "sPSelectorInfoBalloon": "Usuario o entidad de servicio que desea probar",
- "saturday": "Sábado",
- "searchTextTooLongError": "El texto de búsqueda es demasiado largo. No puede tener más de 256 caracteres.",
- "securityDefaultsPolicyName": "Valores predeterminados de seguridad",
- "securityDefaultsTextMessage": "Para habilitar la directiva de acceso condicional, deben deshabilitarse los valores predeterminados de seguridad.",
- "securityDefaultsUpdateInProgressText": "Hay una actualización de los valores predeterminados de seguridad en curso. Espere un momento y vuelva a intentarlo.",
- "securityDefaultsWarningMessage": "Parece que va a administrar las opciones de configuración de seguridad de su organización. ¡Excelente! Primero debe {0}deshabilitar los valores predeterminados de seguridad{1} antes de habilitar una directiva de acceso condicional.",
- "selectDevicePlatforms": "Seleccionar plataformas de dispositivo",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Seleccionar ubicaciones",
- "selectedSP": "Entidad de servicio seleccionada",
- "servicePrincipalBladeExcludedSelectorTitle": "Seleccionar entidades de servicio excluidas",
- "servicePrincipalBladeIncludedSelectorTitle": "Seleccionar entidades de servicio",
- "servicePrincipalDataGridAria": "Lista de entidades de servicio disponibles",
- "servicePrincipalDropDownLabel": "¿A qué se aplica esta directiva?",
- "servicePrincipalInfoBox": "Algunas condiciones no están disponibles debido a la selección de \"{0}\" en la asignación de directiva",
- "servicePrincipalRadioAll": "Todas las entidades de servicio de las que es propietario",
- "servicePrincipalRadioSelect": "Seleccionar entidades de servicio",
- "servicePrincipalSelectionsAria": "Cuadrícula de entidades de servicio seleccionadas",
- "servicePrincipalSelectorAria": "Lista de entidades de servicio elegidas",
- "servicePrincipalSelectorMultiple": "{0} entidades de servicio seleccionadas",
- "servicePrincipalSelectorSingle": "1 entidad de servicio seleccionada",
- "servicePrincipalSpecificExc": "Entidades de servicio específicas excluidas",
- "servicePrincipalSpecificInc": "Entidades de servicio específicas incluidas",
- "servicePrincipals": "Entidades de seguridad",
- "sessionControlBladeTitle": "Sesión",
- "sessionControlDescriptionContent": "Controle el acceso con controles de sesión para habilitar experiencias limitadas en determinadas aplicaciones en la nube.",
- "sessionControlDisableInfo": "Este control solo funciona con aplicaciones compatibles. Actualmente, Office 365, Exchange Online y SharePoint Online son las únicas aplicaciones en la nube compatibles con las restricciones que exige la aplicación. Haga clic aquí para obtener más información.",
- "sessionControlInfoBallonText": "Los controles de sesión proporcionan una experiencia limitada en una aplicación de nube.",
- "sessionControls": "Controles de sesión",
- "sessionControlsAppEnforcedLabel": "Usar restricciones que exige la aplicación",
- "sessionControlsCasLabel": "Utilizar el Control de aplicaciones de acceso condicional",
- "sessionControlsSecureSignInLabel": "Requerir enlace de tokens",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} incluido",
- "signinRiskReauth": "Se tiene que seleccionar la condición “Riesgo de inicio de sesión” cuando se seleccionen la concesión “Requerir autenticación multifactor” y el control de sesión “Frecuencia de inicio de sesión (cada vez)”",
- "signinRiskTriggerDescriptionContent": "Seleccionar el nivel de riesgo de inicio de sesión",
- "singleTenantServicePrincipalInfoBallonText": "La directiva solo se aplica a las entidades de servicio de inquilino único que pertenecen a su organización. Haga clic aquí para más información ",
- "specificSigninRiskLevelsOption": "Seleccionar niveles de riesgo de inicio de sesión específicos",
- "specificUsersExcluded": "usuarios específicos excluidos",
- "specificUsersIncluded": "Usuarios específicos incluidos",
- "specificUsersIncludedAndExcluded": "Usuarios específicos excluidos e incluidos",
- "startDatePickerLabel": "Se inicia el",
- "startFreeTrial": "Iniciar prueba gratuita",
- "startTimePickerLabel": "Hora de inicio",
- "sunday": "Domingo",
- "testButton": "What If",
- "thumbprintCol": "Huella digital",
- "thursday": "Jueves",
- "timeConditionAllTimesLabel": "En cualquier momento",
- "timeConditionIntroText": "Configure la hora a la que se aplicará esta directiva.",
- "timeConditionSelectorInfoBallonContent": "Cuando el usuario inicie sesión; por ejemplo, \"Miércoles 9:00 - 17:00 PST\"",
- "timeConditionSelectorLabel": "Hora (versión preliminar)",
- "timeConditionSpecificLabel": "Horas específicas (versión preliminar)",
- "timeSelectorAllTimesText": "En cualquier momento",
- "timeSelectorSpecificTimesText": "Horas concretas configuradas",
- "timeZoneDropdownInfoBalloonContent": "Seleccione una zona horaria que defina el intervalo de tiempo. Esta directiva se aplica a los usuarios de todas las zonas horarias. Por ejemplo, \"Miércoles 9:00 - 17:00\" para un usuario sería \"Miércoles 10:00 - 18:00\" para un usuario de otra zona horaria.",
- "timeZoneDropdownLabel": "Zona horaria",
- "timeZoneDropdownPlaceholderText": "Seleccione una zona horaria.",
- "tooManyPoliciesDescription": "En este momento, solo se muestran las 50 primeras directivas. Haga clic aquí para verlas todas.",
- "tooManyPoliciesTitle": "Se encontraron más de 50 directivas.",
- "trustedLocationStatusIconDescription": "La ubicación es de confianza.",
- "trustedLocationStatusIconEnabled": "Icono de estado de confianza",
- "tuesday": "Martes",
- "uploadInBadState": "No se puede cargar el archivo especificado.",
- "upsellAppsDescription": "Requiera la autenticación multifactor para las aplicaciones confidenciales siempre o solo desde fuera de la red de la empresa.",
- "upsellAppsTitle": "Aplicaciones seguras",
- "upsellBannerText": "Obtener una prueba gratuita Premium para usar esta característica",
- "upsellDataDescription": "Requiera que el dispositivo se marque como compatible o unido a Microsoft Entra híbrido para permitir el acceso a los recursos de la compañía.",
- "upsellDataTitle": "Datos seguros",
- "upsellDescription": "El acceso condicional proporciona el control y la protección que necesita para mantener protegidos sus datos corporativos, a la vez que ofrece a los usuarios una experiencia que les permite trabajar de forma óptima desde cualquier dispositivo. Por ejemplo, puede restringir el acceso desde fuera de la red de la empresa o a dispositivos que cumplan determinadas directivas.",
- "upsellRiskDescription": "Requerir la autenticación multifactor para los eventos de riesgo que detecte el sistema de aprendizaje automático de Microsoft.",
- "upsellRiskTitle": "Protección frente al riesgo",
- "upsellTitle": "Acceso condicional",
- "upsellWhyTitle": "¿Por qué debe usar el acceso condicional?",
- "userAppNoneOption": "Ninguno",
- "userNamePlaceholderText": "Escribir nombre de usuario",
- "userNotSetSeletorLabel": "0 usuarios y grupos seleccionados",
- "userOnlySelectionBladeExcludeDescription": "Permite seleccionar los usuarios que quedarán exentos de la directiva.",
- "userOrGroupSelectionCountDiffBannerText": "Se han eliminado del directorio {0} configurados en la directiva, pero esto no afectará a otros usuarios y grupos que estén en ella. La próxima vez que actualice la directiva, se quitarán automáticamente los usuarios o grupos que haya eliminado.",
- "userOrSPNotSetSelectorLabel": "0 usuarios o identidades de carga de trabajo seleccionadas",
- "userOrSPSelectionBladeTitle": "Usuarios o identidades de la carga de trabajo",
- "userOrSPSelectorInfoBallonText": "Las identidades en el directorio al que se aplica la directiva, incluidos usuarios, grupos y entidades de servicio",
- "userRequired": "Usuario obligatorio",
- "userRiskErrorBox": "Se debe seleccionar la condición \"Riesgo de usuario\" si se ha seleccionado la concesión \"Requerir cambio de contraseña\".",
- "userRiskReauth": "Se debe seleccionar la condición \"Riesgo de usuario\" y no \"Riesgo de inicio de sesión\" cuando se seleccione la concesión \"Requerir cambio de contraseña\" y el control de sesión \"Frecuencia de inicio de sesión (cada vez)\"",
- "userSPRequired": "Se requiere un usuario o una entidad de servicio",
- "userSPSelectorTitle": "Identidad del usuario o de la carga de trabajo",
- "userSelectionBladeAllUsersAndGroups": "Todos los usuarios y grupos",
- "userSelectionBladeExcludeDescription": "Seleccionar los usuarios y grupos que quedarán exentos de la directiva",
- "userSelectionBladeExcludeTabTitle": "Excluir",
- "userSelectionBladeExcludedSelectorTitle": "Seleccionar usuarios y grupos excluidos",
- "userSelectionBladeIncludeDescription": "Seleccione los usuarios a los que se aplicará esta directiva.",
- "userSelectionBladeIncludeTabTitle": "Incluir",
- "userSelectionBladeIncludedSelectorTitle": "Seleccionar",
- "userSelectionBladeSelectUsers": "Seleccionar usuarios",
- "userSelectionBladeSelectedUsers": "Seleccionar usuarios y grupos",
- "userSelectionBladeTitle": "Usuarios y grupos",
- "userSelectorBladeTitle": "Usuarios",
- "userSelectorExcluded": "{0} excluido",
- "userSelectorGroupPlural": "{0} grupos",
- "userSelectorGroupSingular": "1 grupo",
- "userSelectorIncluded": "{0} incluido",
- "userSelectorInfoBallonText": "Usuarios y grupos del directorio a los que se aplica la directiva. Por ejemplo, 'Grupo piloto'.",
- "userSelectorSelected": "{0} seleccionados",
- "userSelectorTitle": "Usuario",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "Usuarios de {0}",
- "userSelectorUserSingular": "1 usuario",
- "userSelectorWithExclusion": "{0} y {1}",
- "usersGroupsLabel": "Usuarios y grupos",
- "viewApprovedAppsText": "Ver la lista de aplicaciones cliente aprobadas",
- "viewCompliantAppsText": "Ver la lista de aplicaciones cliente protegidas por directivas",
- "viewPolicyInformation": "Ver la información de directivas",
- "vpnBladeTitle": "conectividad VPN",
- "vpnCertCreateFailedMessage": "Error: {0}",
- "vpnCertCreateFailedTitle": "No se pudo crear {0}",
- "vpnCertCreateInProgressTitle": "Creando {0}",
- "vpnCertCreateSuccessMessage": "{0} se creó correctamente.",
- "vpnCertCreateSuccessTitle": "{0} se creó correctamente.",
- "vpnCertNoRowsMessage": "No se encontraron certificados VPN.",
- "vpnCertUpdateFailedMessage": "Error: {0}",
- "vpnCertUpdateFailedTitle": "No se pudo actualizar {0}",
- "vpnCertUpdateInProgressTitle": "Actualizando {0}",
- "vpnCertUpdateSuccessMessage": "{0} se actualizó correctamente.",
- "vpnCertUpdateSuccessTitle": "{0} se ha actualizado correctamente",
- "vpnFeatureInfo": "Para obtener más información sobre el acceso condicional y la conectividad VPN, haga clic aquí.",
- "vpnFeatureWarning": "Una vez que se crea un certificado VPN en Azure Portal, el id. de Microsoft Entra empezará a usarlo inmediatamente para emitir certificados de corta duración al cliente VPN. Es fundamental que el certificado VPN se implemente inmediatamente en el servidor VPN para evitar cualquier problema con la validación de credenciales del cliente VPN.",
- "vpnMenuText": "conectividad VPN",
- "vpncertDropdownDefaultOption": "Duración",
- "vpncertDropdownInfoBalloonContent": "Seleccione la duración para el certificado que quiere crear.",
- "vpncertDropdownLabel": "Seleccionar duración",
- "vpncertDropdownOneyearOption": "1 año",
- "vpncertDropdownThreeyearOption": "3 años",
- "vpncertDropdownTwoyearOption": "2 años",
- "wednesday": "Miércoles",
- "whatIfCountry": "País o región",
- "whatIfCountryInfo": "País o región desde el que inicia sesión el usuario.",
- "whatIfDevicePlatformInfo": "Plataforma del dispositivo desde la que inicia sesión el usuario.",
- "whatIfEnterIpAddress": "Escriba la dirección IP (p. ej., 40.77.182.32).",
- "whatIfErrorInvalidIpAddress": "Se ha especificado una dirección IP no válida.",
- "whatIfIpAddress": "Dirección IP",
- "whatIfIpAddressInfo": "Dirección IP desde la que inicia sesión el usuario.",
- "whatIfIpCountryInfoBoxText": "Si usa Dirección IP o País o región, ambos campos serán necesarios y deberá asignarlos correctamente al mismo tiempo.",
- "whatIfSelectCountry": "Seleccione el país o la región...",
- "whatIfSelectDevicePlatform": "Seleccionar plataforma del dispositivo...",
- "whatIfSelectPrivateLink": "Seleccione un vínculo privado...",
- "whatIfSelectSignInRisk": "Seleccionar riesgo de inicio de sesión...",
- "whatIfSignInRisk": "Riesgo de inicio de sesión",
- "whatIfSignInRiskInfo": "Nivel de riesgo asociado con el inicio de sesión.",
- "whatIfUnknownAreas": "Áreas desconocidas",
- "windows365InfoBox": "Al seleccionar Windows 365, esta acción impactará en las conexiones a los equipos en la nube y los hosts de sesión de Azure Virtual Desktop. Haga clic aquí para obtener más información.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Identidades de carga de trabajo (versión preliminar)",
- "workloadIdentitiesLicenseText": "Se requiere una licencia P1 o P2 de identidades de carga de trabajo para editar esta directiva.",
- "workloadIdentity": "Identidad de la carga de trabajo"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Sin soporte técnico",
- "supportEnding": "Próximo al fin del soporte técnico",
- "supported": "Con soporte técnico"
- }
- },
- "SecurityTemplate": {
- "aSR": "Reducción de la superficie expuesta a ataques",
- "accountProtection": "Protección de cuentas",
- "allDevices": "Todos los dispositivos",
- "antivirus": "Antivirus",
- "antivirusReporting": "Informes de Antivirus (vista previa)",
- "conditionalAccess": "Acceso condicional",
- "deviceCompliance": "Conformidad de dispositivos",
- "diskEncryption": "Cifrado de disco",
- "eDR": "Detección de puntos de conexión y respuesta",
- "ePM": "Administración de privilegios de punto de conexión",
- "firewall": "Firewall",
- "helpSupport": "Ayuda y soporte técnico",
- "setup": "Instalación",
- "wdapt": "Microsoft Defender for Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Error",
- "hardReboot": "Reinicio en frío",
- "retry": "Reintentar",
- "softReboot": "Reinicio en caliente",
- "success": "Correcto"
- },
- "Columns": {
- "codeType": "Tipo de código",
- "returnCode": "Código de retorno"
- },
- "bladeTitle": "Códigos de retorno",
- "gridAriaLabel": "Códigos de retorno",
- "header": "Especifique códigos de retorno para indicar el comportamiento posterior a la instalación:",
- "onAddAnnounceMessage": "El código de retorno agregó el elemento {0} de {1}",
- "onDeleteSuccess": "El código de retorno {0} se ha eliminado correctamente.",
- "returnCodeAlreadyUsedValidation": "El código de retorno ya está en uso.",
- "returnCodeMustBeIntegerValidation": "El código de retorno debe ser un entero.",
- "returnCodeShouldBeAtLeast": "El código de retorno debe ser como mínimo {0}.",
- "returnCodeShouldBeAtMost": "El código de retorno debe ser como máximo {0}.",
- "selectorLabel": "Códigos de retorno"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Árabe",
- "bulgarian": "Búlgaro",
- "chineseSimplified": "Chino (simplificado)",
- "chineseTraditional": "Chino (tradicional)",
- "croatian": "Croata",
- "czech": "Checo",
- "danish": "Danés",
- "dutch": "Neerlandés",
- "englishUK": "Inglés (Reino Unido)",
- "englishUS": "Inglés (Estados Unidos)",
- "estonian": "Estonio",
- "finnish": "Finés",
- "frenchCanada": "Francés (Canadá)",
- "frenchFrance": "Francés (Francia)",
- "german": "Alemán",
- "greek": "Griego",
- "hebrew": "Hebreo",
- "hungarian": "Húngaro",
- "italian": "Italiano",
- "japanese": "Japonés",
- "korean": "Coreano",
- "latvian": "Letón",
- "lithuanian": "Lituano",
- "norwegian": "Noruego, bokmal",
- "polish": "Polaco",
- "portugueseBrazil": "Portugués (Brasil)",
- "portuguesePortugal": "Portugués (Portugal)",
- "romanian": "Rumano",
- "russian": "Ruso",
- "serbian": "Serbio",
- "slovak": "Eslovaco",
- "slovenian": "Esloveno",
- "spanishMexico": "Español (México)",
- "spanishSpain": "Español (España)",
- "swedish": "Sueco",
- "thai": "Tailandés",
- "turkish": "Turco",
- "ukrainian": "Ucraniano"
- },
- "Summary": {
- "placeholder": "Seleccione un mensaje de notificación de los que aparecen a la izquierda para obtener una vista previa del contenido."
- },
- "companyContact": "Mostrar información de contacto",
- "companyLogo": "Mostrar logotipo de la empresa",
- "companyName": "Mostrar el nombre de la empresa",
- "createEditDescription": "Crear o editar plantillas de mensajes de notificación.",
- "createMessage": "Crear mensaje",
- "deviceDetails": "Mostrar detalles del dispositivo",
- "deviceDetailsInfoBox": "Esta configuración está desactivada de forma predeterminada, ya que la recuperación de detalles del dispositivo podría provocar un retraso en la recepción de notificaciones por correo electrónico.",
- "editImpactInfo": "Si modifica este mensaje de notificación, afectará a todas las directivas que utilizan esta plantilla.",
- "editMessage": "Editar mensaje",
- "email": "correo electrónico",
- "emailFooterTitle": "Pie de página del correo electrónico",
- "emailHeaderFooterInfo": "La configuración de encabezado y pie de página de correo electrónico para las notificaciones de correo electrónico se basa en la configuración de personalización dentro del nodo Administrador de inquilinos en Endpoint Manager.",
- "emailHeaderTitle": "Encabezado del correo electrónico",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Configurar opciones de personalización",
- "formSubTitle": "Crear o modificar correos electrónicos de notificación",
- "headerFooterSettingsTab": "Configuración de encabezado y pie de página",
- "imgPreview": "Vista previa de imagen",
- "infotext": "Seleccione un mensaje de notificación. Para crear una notificación, visite Notificación en la sección Administrar de la carga de trabajo Establecer la compatibilidad con dispositivos.",
- "iwLink": "Mostrar vínculo de sitio web del portal de empresa",
- "listEmpty": "No hay plantillas de mensajes.",
- "listEmptySelectOnly": "No hay plantillas de mensajes. Para crear una nueva notificación, visite Notificaciones en la sección Administrar de la carga de trabajo Establecer la compatibilidad con dispositivos.",
- "listSubTitle": "Lista de plantillas de mensajes de notificación",
- "listTitle": "Plantillas de mensaje de notificación",
- "localizedNotificationMessageTemplates": "Plantillas de mensajes de notificación localizadas",
- "messageAssigned": "No puede eliminar esta plantilla de mensaje, porque la están utilizando una o varias directivas de cumplimiento.",
- "messageCapitalized": "Plantilla de mensaje de notificación",
- "messageLowercase": "plantilla de mensaje de notificación",
- "missingDefaultError": "Seleccionar una plantilla predeterminada",
- "notificationMessageTemplates": "Plantillas de mensaje de notificación",
- "rowValidationError": "Se requiere al menos una plantilla de mensaje",
- "selectDescription": "Seleccione un mensaje de notificación. Para crear una nueva notificación, visite Notificaciones en la sección Administrar de la carga de trabajo Establecer la compatibilidad con dispositivos.",
- "tenantValueText": "Valor de inquilino",
- "testEmailLabel": "Enviar una vista previa del correo electrónico",
- "localeLabel": "Configuración regional",
- "isDefaultLocale": "Predeterminado"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Número de días que debe esperarse antes de aplicar el reinicio"
- },
"Description": {
"label": "Descripción"
},
+ "FeatureDeploymentSettings": {
+ "header": "Configuración de implementación de características"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Esta característica no puede degradar un dispositivo.",
+ "label": "Actualización de características para implementar"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Disponibilidad del primer grupo"
+ },
+ "GradualRolloutInterval": {
+ "label": "Días entre grupos"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Disponibilidad del primer grupo"
+ },
"Name": {
"label": "Nombre"
},
- "QualityUpdateRelease": {
- "label": "Acelere la instalación de las actualizaciones de calidad si la versión del sistema operativo del dispositivo es anterior a:"
- },
- "bladeTitle": "Actualizaciones de calidad para Windows 10 y versiones posteriores (versión preliminar)",
- "loadError": "Error al cargar."
+ "OptionalUpdate": {
+ "label": "Actualización necesaria u opcional"
+ },
+ "RolloutOptions": {
+ "label": "Opciones de lanzamiento"
+ },
+ "RolloutSettings": {
+ "header": "¿Cuándo le gustaría que la actualización estuviera disponible en Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Configure etiquetas de ámbito para esta directiva."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "Primera fecha disponible"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Deshabilitado",
+ "enabled": "Habilitado",
+ "infoBalloonContent": "Controlar si se debe instalar la actualización de características de Windows 10 más reciente en los dispositivos que no cumplan los requisitos para Windows 11",
+ "label": "Cuando un dispositivo no sea elegible para ejecutar Windows 11, instale la actualización de características de Windows 10 más reciente",
+ "notApplicable": "No aplicable",
+ "summaryLabel": "Instalar Windows 10 en dispositivos no aptos para ejecutar Windows 11"
+ },
+ "bladeTitle": "Implementaciones de actualización de características",
+ "deploymentSettingsTitle": "Configuración de la implementación",
+ "loadError": "Error al cargar.",
+ "windows11EULA": "Al seleccionar esta actualización de características para implementar, acepta que al aplicar este sistema operativo a un dispositivo (1) la licencia de Windows correspondiente se adquirió a través de licencias por volumen o (2) que está autorizado para vincular a su organización y está aceptando en su nombre los Términos de licencia del software de Microsoft relevantes que encontrará aquí {0}."
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\" se ha guardado.",
+ "newFeatureUpdateDeploymentCreated": "Se ha creado una implementación de actualización de características."
+ },
"TabName": {
- "qualityUpdateSettings": "Configuración"
+ "deploymentSettings": "Configuración de la implementación",
+ "groupAssignmentSettings": "Asignaciones",
+ "scopeSettings": "Etiquetas de ámbito"
},
- "infoBoxText": "El único control de actualización de calidad dedicado disponible, aparte de la directiva de anillos de actualización de Windows 10 y posteriores, es la capacidad de acelerar las actualizaciones de calidad de los dispositivos que se encuentran en un nivel de revisión especificado. Habrá controles adicionales disponibles en el futuro.",
- "licenseLearnMoreText": "Obtener más información sobre los requisitos previos y las directivas de actualización de calidad.",
- "licenseWarningBoxText": "La creación de directivas de actualización de calidad requiere licencias específicas.",
- "warningBoxText": "Aunque acelerar las actualizaciones de software puede ayudar a reducir el tiempo necesario para lograr el cumplimiento, su impacto en la productividad del usuario final es mayor. Las posibilidades de experimentar un reinicio durante el horario laboral aumentan considerablemente."
+ "gradualRolloutLicenseWarning": "Esta funcionalidad requiere licencias específicas.",
+ "gradualRolloutLicenseWarningEdit": "Esta funcionalidad se puede seguir usando y configurando hasta que se guarde la directiva sin seleccionar esta funcionalidad.",
+ "licenseLearnMoreText": "Obtener más información sobre los requisitos previos y las directivas de actualización de características.",
+ "optionalUpdateWarning": "Opcional solo está disponible para actualizaciones de Windows 11",
+ "profileNameWarning": "El nombre debe tener menos de 64 caracteres",
+ "specificLicensingRequired": "Algunas funcionalidades seleccionadas requieren licencias específicas."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64 bits",
- "thirtyTwoBit": "32 bits"
- },
- "TACSettings": {
- "edgeSettings": "Valores de configuración de Edge",
- "edgeWindowsDataProtectionSettings": "Configuración de protección de datos de Microsoft Edge (Windows) - Versión preliminar",
- "edgeWindowsSettings": "Opciones de configuración de Microsoft Edge (Windows) - Versión preliminar",
- "generalAppConfig": "Configuración general de la aplicación",
- "generalSettings": "Opciones de configuración generales",
- "outlookSMIMEConfig": "Configuración de S/MIME de Outlook",
- "outlookSettings": "Valores de configuración de Outlook",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Agregar límite de red",
- "addNetworkBoundaryButton": "Agregar límite de red...",
- "allowWindowsSearch": "Permitir que Windows Search busque datos corporativos cifrados y aplicaciones de la Tienda",
- "authoritativeIpRanges": "La lista de intervalos IP de la empresa es autoritativa (no usar detección automática)",
- "authoritativeProxyServers": "La lista de servidores proxy de la empresa es autoritativa (no usar detección automática)",
- "boundaryType": "Tipo de límite",
- "cloudResources": "Recursos de nube",
- "corporateIdentity": "Identidad corporativa",
- "dataRecoveryCert": "Cargar un certificado del Agente de recuperación de datos (DRA) para poder recuperar datos cifrados",
- "editNetworkBoundary": "Editar límite de red",
- "enrollmentState": "Estado de inscripción",
- "iPv4Ranges": "Intervalos IPv4",
- "iPv6Ranges": "Intervalos IPv6",
- "internalProxyServers": "Servidores proxy internos",
- "maxInactivityTime": "Cantidad máxima de tiempo permitido (en minutos) con el dispositivo inactivo que, una vez transcurrida, causará el bloqueo del dispositivo mediante PIN o contraseña",
- "maxPasswordAttempts": "Número de errores de autenticación permitidos antes de borrar el dispositivo",
- "mdmDiscoveryUrl": "Dirección URL de descubrimiento de MDM",
- "mdmRequiredSettingsInfo": "Esta directiva solo se aplica a Windows 10 Anniversary Edition y versiones posteriores. Además, usa Windows Information Protection (WIP) para aplicar protección.",
- "minimumPinLength": "Establecer el número mínimo de caracteres requeridos para el PIN",
- "name": "Nombre",
- "networkBoundariesGridEmptyText": "Los límites de red que agregue se mostrarán aquí",
- "networkBoundary": "Límite de red",
- "networkDomainNames": "Dominios de red",
- "neutralResources": "Recursos neutros",
- "passportForWork": "Usar Windows Hello para empresas como método para iniciar sesión en Windows",
- "pinExpiration": "Especificar el período de tiempo (en días) que se puede usar un PIN antes de que el sistema solicite al usuario que lo cambie",
- "pinHistory": "Especificar el número de PIN anteriores asociados a una cuenta de usuario que no se pueden volver a usar",
- "pinLowercaseLetters": "Configurar el uso de letras minúsculas en el PIN de Windows Hello para empresas",
- "pinSpecialCharacters": "Configurar el uso de caracteres especiales en el PIN de Windows Hello para empresas",
- "pinUppercaseLetters": "Configurar el uso de letras mayúsculas en el PIN de Windows Hello para empresas",
- "protectUnderLock": "Impedir que las aplicaciones accedan a los datos corporativos cuando el dispositivo está bloqueado. Se aplica únicamente a Windows 10 Mobile.",
- "protectedDomainNames": "Dominios protegidos",
- "proxyServers": "Servidores proxy",
- "requireAppPin": "Deshabilitar PIN de aplicación cuando se administre el PIN del dispositivo",
- "requiredSettings": "Valores obligatorios",
- "requiredSettingsInfo": "Al cambiar el ámbito o quitar esta directiva, se descifrarán los datos corporativos.",
- "revokeOnMdmHandoff": "Revocar el acceso a los datos protegidos cuando el dispositivo se inscriba en MDM",
- "revokeOnUnenroll": "Revocar claves de cifrado al cancelar la inscripción",
- "rmsTemplateForEdp": "Especificar el identificador de la plantilla que se va a usar para Azure RMS",
- "showWipIcon": "Mostrar el icono de protección de datos de empresa",
- "type": "Tipo",
- "useRmsForWip": "Usar Azure RMS para WIP",
- "value": "Valor",
- "weRequiredSettingsInfo": "Esta directiva solo se aplica a Windows 10 Creators Update y versiones posteriores. Además, usa Windows Information Protection (WIP) y Windows MAM para aplicar protección.",
- "wipProtectionMode": "Modo de Windows Information Protection",
- "withEnrollment": "Con inscripción",
- "withoutEnrollment": "Sin inscripción"
+ "Platform": {
+ "all": "Todas",
+ "android": "Administrador de dispositivos Android",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Común",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS y Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Desconocido",
+ "unsupported": "No compatible",
+ "windows": "Windows",
+ "windows10": "Windows 10 y versiones posteriores",
+ "windows10CM": "Windows 10 y versiones posteriores (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 y versiones posteriores",
+ "windows8And10": "Windows 8 y 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 y versiones posteriores",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 y Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 y versiones posteriores (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "PC Windows"
+ },
+ "InstallIntent": {
+ "available": "Disponible para dispositivos inscritos",
+ "availableWithoutEnrollment": "Disponible con o sin inscripción",
+ "required": "Requerido",
+ "uninstall": "Desinstalar"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filtrar",
+ "noFilters": "Ninguno"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Autor",
- "template": "Nombre de la plantilla"
- },
- "Row": {
- "ariaLabel": "fila {0} de {1} columna {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Empiece desde cero y seleccione las propiedades que desee de la biblioteca de propiedades de inventario disponibles."
- },
- "SettingsCatalog": {
- "subtitle": "Empiece de cero y seleccione la configuración que quiera en la biblioteca de valores disponibles",
- "title": "Catálogo de configuración"
- },
- "Templates": {
- "subtitle": "Las plantillas contienen grupos de valores, organizados por funcionalidad. Use una plantilla cuando no quiera compilar las directivas de forma manual o cuando quiera configurar dispositivos para acceder a las redes corporativas, por ejemplo, una configuración de Wi-Fi o VPN.",
- "title": "Plantillas"
- },
- "noData": "No se han encontrado plantillas de directiva."
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Cliente para equipo de escritorio de Project Online",
- "visioProRetail": "Visio Online Plan 2"
- },
- "Countries": {
- "ae": "Emiratos Árabes Unidos",
- "ag": "Antigua y Barbuda",
- "ai": "Anguila",
- "al": "Albania",
- "am": "Armenia",
- "ao": "Angola",
- "ar": "Argentina",
- "at": "Austria",
- "au": "Australia",
- "az": "Azerbaiyán",
- "bb": "Barbados",
- "be": "Bélgica",
- "bf": "Burkina Faso",
- "bg": "Bulgaria",
- "bh": "Baréin",
- "bj": "Benín",
- "bm": "Bermudas",
- "bn": "Brunéi",
- "bo": "Bolivia",
- "br": "Brasil",
- "bs": "Bahamas",
- "bt": "Bután",
- "bw": "Botsuana",
- "by": "Belarús",
- "bz": "Belice",
- "ca": "Canadá",
- "cg": "República del Congo",
- "ch": "Suiza",
- "cl": "Chile",
- "cn": "China",
- "co": "Colombia",
- "cr": "Costa Rica",
- "cv": "Cabo Verde",
- "cy": "Chipre",
- "cz": "República Checa",
- "de": "Alemania",
- "dk": "Dinamarca",
- "dm": "Dominica",
- "do": "República Dominicana",
- "dz": "Argelia",
- "ec": "Ecuador",
- "ee": "Estonia",
- "eg": "Egipto",
- "es": "España",
- "fi": "Finlandia",
- "fj": "Fiyi",
- "fm": "Estados Federados de Micronesia",
- "fr": "Francia",
- "gb": "Reino Unido",
- "gd": "Granada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Grecia",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hong Kong",
- "hn": "Honduras",
- "hr": "Croacia",
- "hu": "Hungría",
- "id": "Indonesia",
- "ie": "Irlanda",
- "il": "Israel",
- "in": "India",
- "is": "Islandia",
- "it": "Italia",
- "jm": "Jamaica",
- "jo": "Jordania",
- "jp": "Japón",
- "ke": "Kenia",
- "kg": "Kirguistán",
- "kh": "Camboya",
- "kn": "San Cristóbal y Nieves",
- "kr": "República de Corea",
- "kw": "Kuwait",
- "ky": "Islas Caimán",
- "kz": "Kazajistán",
- "la": "República Democrática Popular de Laos",
- "lb": "Líbano",
- "lc": "Santa Lucía",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Lituania",
- "lu": "Luxemburgo",
- "lv": "Letonia",
- "md": "República de Moldova",
- "mg": "Madagascar",
- "mk": "Macedonia del Norte",
- "ml": "Malí",
- "mn": "Mongolia",
- "mo": "Macao",
- "mr": "Mauritania",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauricio",
- "mw": "Malaui",
- "mx": "México",
- "my": "Malasia",
- "mz": "Mozambique",
- "na": "Namibia",
- "ne": "Níger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Países Bajos",
- "no": "Noruega",
- "np": "Nepal",
- "nz": "Nueva Zelanda",
- "om": "Omán",
- "pa": "Panamá",
- "pe": "Perú",
- "pg": "Papúa Nueva Guinea",
- "ph": "Filipinas",
- "pk": "Pakistán",
- "pl": "Polonia",
- "pt": "Portugal",
- "pw": "Palaos",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Rumanía",
- "ru": "Rusia",
- "sa": "Arabia Saudí",
- "sb": "Islas Salomón",
- "sc": "Seychelles",
- "se": "Suecia",
- "sg": "Singapur",
- "si": "Eslovenia",
- "sk": "Eslovaquia",
- "sl": "Sierra Leona",
- "sn": "Senegal",
- "sr": "Surinam",
- "st": "Santo Tomé y Príncipe",
- "sv": "El Salvador",
- "sz": "Suazilandia",
- "tc": "Islas Turcas y Caicos",
- "td": "Chad",
- "th": "Tailandia",
- "tj": "Tayikistán",
- "tm": "Turkmenistán",
- "tn": "Túnez",
- "tr": "Turquía",
- "tt": "Trinidad y Tobago",
- "tw": "Taiwán",
- "tz": "Tanzania",
- "ua": "Ucrania",
- "ug": "Uganda",
- "us": "Estados Unidos",
- "uy": "Uruguay",
- "uz": "Uzbekistán",
- "vc": "San Vicente y las Granadinas",
- "ve": "Venezuela",
- "vg": "Islas Vírgenes Británicas",
- "vn": "Vietnam",
- "ye": "Yemen",
- "za": "Sudáfrica",
- "zw": "Zimbabue"
- },
- "OfficeUpdateChannel": {
- "current": "Canal actual",
- "deferred": "Canal semestral para empresas",
- "firstReleaseCurrent": "Canal actual (vista previa)",
- "firstReleaseDeferred": "Canal semestral para empresas (vista previa)",
- "monthlyEnterprise": "Canal de empresa mensual",
- "placeHolder": "Seleccionar una"
- },
- "AppProtection": {
- "allAppTypes": "Destinar a todos los tipos de aplicaciones",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Aplicaciones en el perfil de trabajo Android",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Aplicaciones en dispositivos dedicados Android Enterprise con modo compartido Microsoft Entra",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Aplicaciones en un proyecto de código abierto de Android asociado",
- "appsOnAndroidOpenSourceProjectUserless": "Aplicaciones en un proyecto de código abierto de Android sin usuario",
- "appsOnIntuneManagedDevices": "Aplicaciones en dispositivos administrados de Intune",
- "appsOnUnmanagedDevices": "Aplicaciones en dispositivos no administrados",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "MAC",
- "notAvailable": "No disponible",
- "windows10PlatformLabel": "Windows 10 y versiones posteriores",
- "withEnrollment": "Con inscripción",
- "withoutEnrollment": "Sin inscripción"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Rol integrado",
- "customCloudPCRole": "Rol personalizado de Windows 365",
- "customIntuneRole": "Rol personalizado de Intune",
- "customRole": "Rol personalizado"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} se incluye en uno o más conjuntos de directivas. Si elimina {0}, ya no se podrá asignar mediante dichos conjuntos. ¿Quiere eliminarla de todas formas?",
- "contentWithError": "{0} puede estar incluida en uno o varios conjuntos de directivas. Si elimina {0}, ya no se podrá asignar mediante dichos conjuntos. ¿Quiere eliminarla de todos modos?",
- "header": "¿Seguro que quiere eliminar esta restricción?"
- },
- "DeviceLimit": {
- "description": "Especifique el número máximo de dispositivos que un usuario puede inscribir.",
- "header": "Restricciones de límite de dispositivos",
- "info": "Define cuántos dispositivos puede inscribir cada usuario."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Debe ser 1.0 o posterior.",
- "android": "Escriba un número de versión válido. Ejemplos: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Escriba un número de versión válido. Ejemplos: 5.0, 5.1.1",
- "iOS": "Escriba un número de versión válido. Ejemplos: 9.0, 10.0, 9.0.2",
- "mac": "Escriba un número de versión válido. Ejemplos: 10, 10.10, 10.10.1",
- "min": "El valor mínimo no puede ser inferior a {0}",
- "minMax": "La versión mínima no puede ser superior a la versión máxima.",
- "windows": "Debe ser 10.0 o superior. Déjela en blanco para permitir dispositivos 8.1",
- "windowsMobile": "Debe ser 10.0 o superior. Déjela en blanco para permitir dispositivos 8.1"
- },
- "allPlatformsBlocked": "Todas las plataformas de dispositivos están bloqueadas. Permita que la inscripción de la plataforma habilite la configuración de la plataforma.",
- "blockManufacturerPlaceHolder": "Nombre del fabricante",
- "blockManufacturersHeader": "Fabricantes bloqueados",
- "cannotRestrict": "No se admite la restricción.",
- "configurationDescription": "Especifica las restricciones de configuración de plataforma que deben cumplirse para inscribir un dispositivo. Use directivas de cumplimiento para restringir los dispositivos una vez inscritos. Defina las versiones como principal.secundaria.compilación. Las restricciones de versión solo se aplican a los dispositivos inscritos en el Portal de empresa. Intune clasifica los dispositivos como propiedad personal de forma predeterminada. Para clasificarlos como propiedad corporativa, se deben tomar medidas adicionales.",
- "configurationDescriptionLabel": "Más información sobre cómo establecer restricciones de inscripción",
- "configurations": "Configurar plataformas",
- "deviceManufacturer": "Fabricante del dispositivo",
- "header": "Restricciones de tipo de dispositivo",
- "info": "Define qué plataformas, versiones y tipos de administración pueden inscribirse.",
- "manufacturer": "Fabricante",
- "max": "Máx.",
- "maxVersion": "Versión máxima",
- "min": "Mín.",
- "minVersion": "Versión mínima",
- "newPlatforms": "Ha permitido nuevas plataformas. Considere la posibilidad de actualizar Configuraciones de plataforma.",
- "personal": "Propiedad personal",
- "platform": "Plataforma",
- "platformDescription": "Puede permitir la inscripción de las plataformas siguientes. Bloquee simplemente las plataformas que no vaya a admitir. Las plataformas permitidas pueden configurarse con restricciones de inscripción adicionales.",
- "platformSettings": "Configuración de plataforma",
- "platforms": "Seleccionar plataformas",
- "platformsSelected": "{0} plataformas seleccionadas",
- "type": "Tipo",
- "versions": "versiones",
- "versionsRange": "Permitir intervalo mín./máx.:",
- "windowsTooltip": "Restringe la inscripción a través de la administración de dispositivos móviles. No restringe la instalación del agente de PC. Solo se admiten las versiones de Windows 10 y Windows 11. Deje las versiones en blanco para permitir Windows 8.1."
- },
- "Priority": {
- "saved": "Las prioridades de restricción se guardaron correctamente."
- },
- "Row": {
- "announce": "Prioridad: {0}. Nombre: {1}. Asignadο: {2}"
- },
- "Table": {
- "deployed": "Implementada",
- "name": "Nombre",
- "priority": "Prioridad"
- },
- "Type": {
- "limit": "Restricción de límite de dispositivos",
- "type": "Restricción de tipo de dispositivo"
- },
- "allUsers": "Todos los usuarios",
- "androidRestrictions": "Restricciones de Android",
- "create": "Crear restricción",
- "defaultLimitDescription": "Esta es la restricción de límite de dispositivos predeterminada aplicada con la prioridad más baja a todos los usuarios, independientemente de la pertenencia a grupos.",
- "defaultTypeDescription": "Esta es la restricción de tipo de dispositivo predeterminada aplicada con la prioridad más baja a todos los usuarios, independientemente de la pertenencia a grupos.",
- "defaultWhfbDescription": "Esta es la configuración de Windows Hello para empresas predeterminada que se aplica con la prioridad más baja a todos los usuarios, independientemente de la pertenencia a grupos.",
- "deleteMessage": "Los usuarios afectados se verán restringidos por la siguiente restricción de prioridad más alta asignada o la predeterminada, si no se asigna ninguna otra.",
- "deleteTitle": "¿Está seguro de que quiere eliminar la restricción {0}?",
- "descriptionHint": "Párrafo breve que describe el nivel de restricción o uso corporativo que caracteriza la configuración de la restricción.",
- "edit": "Editar restricción",
- "info": "Un dispositivo debe cumplir las restricciones de inscripción de prioridad más alta asignadas a su usuario. Puede arrastrar una restricción de dispositivo para cambiar su prioridad. Las restricciones predeterminadas tienen la prioridad más baja y se aplican a las inscripciones sin usuario. Además, se pueden editar, pero no eliminarse.",
- "iosRestrictions": "Restricciones de iOS",
- "mDM": "MDM",
- "macRestrictions": "Restricciones para macOS",
- "maxVersion": "Versión máxima",
- "minVersion": "Versión mínima",
- "nameHint": "Este será el primer atributo principal visible para identificar el conjunto de restricciones.",
- "noAssignmentsStatusBar": "Asigne la restricción al menos a un grupo. Haga clic en Propiedades.",
- "nonAdminForbiddenCreateError": "Debe ser un administrador global o de servicios de Intune para crear, editar o eliminar restricciones.",
- "nonAdminForbiddenEdit": "Debe ser administrador para editar las restricciones.",
- "notFound": "La restricción no se ha encontrado. Puede que ya se haya eliminado.",
- "personallyOwned": "Dispositivos de propiedad personal",
- "restriction": "Restricción",
- "restrictionLowerCase": "restricción",
- "restrictionType": "Restriction type",
- "selectType": "Seleccionar el tipo de restricción",
- "selectValidation": "Seleccione una plataforma.",
- "typeHint": "Elija Restricción de tipo de dispositivo para restringir las propiedades del dispositivo. Elija Restricción de límite de dispositivos para restringir el número de dispositivos por usuario.",
- "typeRequired": "Se requiere el tipo de restricción.",
- "winPhoneRestrictions": "Restricciones de Windows Phone",
- "windowsECv1Info": "Las restricciones de inscripción más antiguas no se pueden editar ni volver a priorizar, solo eliminar.",
- "windowsECv2Info": "Puede priorizar las restricciones de inscripción arrastrándolas y soltándolas. Vea a continuación las restricciones predeterminadas y preconfiguradas. Todas las nuevas restricciones de inscripción tendrán mayor prioridad que las restricciones predeterminadas y preconfiguradas.",
- "windowsRestrictions": "Restricciones de Windows",
- "windowsRestrictionsPreview": "Restricciones de Windows basadas en filtros (versión preliminar)"
- },
- "InstallContextType": {
- "device": "Dispositivo",
- "deviceContext": "Contexto del dispositivo",
- "user": "Usuario",
- "userContext": "Contexto del usuario"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Descripción",
- "placeholder": "Escribir una descripción"
- },
- "NameTextBox": {
- "label": "Nombre",
- "placeholder": "Escriba un nombre"
- },
- "PublisherTextBox": {
- "label": "Editor",
- "placeholder": "Escribir un editor"
- },
- "VersionTextBox": {
- "label": "Versión"
- },
- "headerDescription": "Cree un paquete de scripts personalizado a partir de los scripts de detección y corrección que ha escrito."
- },
- "ScopeTags": {
- "headerDescription": "Seleccione uno o varios grupos para asignar el paquete de scripts."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Script de detección",
- "placeholder": "Texto del script de entrada",
- "requiredValidationMessage": "Escriba el script de detección."
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Exigir comprobación de firma del script"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Ejecutar este script con las credenciales de inicio de sesión"
- },
- "RemediationScript": {
- "infoBox": "El script se ejecutará en modo exclusivo de detección porque no hay ningún script de corrección."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Script de corrección",
- "placeholder": "Texto del script de entrada"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Ejecutar script en PowerShell de 64 bits"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Script no válido. Uno o varios de los caracteres que se usan en el script no son válidos."
- },
- "headerDescription": "Cree un paquete de scripts personalizado a partir de los scripts que ha escrito. De forma predeterminada, los scripts se ejecutarán en los dispositivos asignados cada día.",
- "infoBox": "Este script es de solo lectura. Es posible que algunos de los valores de este script estén deshabilitados."
- },
- "title": "Crear un script personalizado",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Intervalo",
- "time": "Fecha y hora"
- },
- "Interval": {
- "day": "Se repite cada día",
- "days": "Se repite cada {0} días",
- "hour": "Se repite cada hora",
- "hours": "Se repite cada {0} horas",
- "month": "Se repite cada mes",
- "months": "Se repite cada {0} meses",
- "week": "Se repite cada semana",
- "weeks": "Se repite cada {0} semanas"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) el {1}",
- "withDate": "{0} el {1}"
- }
- }
- },
- "Edit": {
- "title": "Editar: {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Direcciones URL permitidas",
- "tooltip": "Especifique los sitios a los que los usuarios pueden acceder mientras están en su contexto de trabajo. No se permitirá ningún otro sitio. Puede elegir configurar una lista de sitios permitidos o bloqueados, pero no ambas."
- },
- "ApplicationProxyRedirection": {
- "header": "Proxy de aplicación",
- "title": "Redirección de proxy de aplicación",
- "tooltip": "Habilite la redirección de proxy de aplicación para dar acceso a los usuarios a los vínculos corporativos y a las aplicaciones web locales."
- },
- "BlockedURLs": {
- "title": "URL bloqueadas",
- "tooltip": "Especifique los sitios bloqueados para los usuarios mientras están en su contexto de trabajo. El resto de los sitios estarán permitidos. Puede elegir configurar una lista de sitios permitidos o bloqueados, pero no ambas. "
- },
- "Bookmarks": {
- "header": "Marcadores administrados",
- "tooltip": "Escriba una lista de direcciones URL marcadas que estén disponibles para los usuarios al utilizar Microsoft Edge en su contexto de trabajo.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Página principal administrada",
- "title": "Dirección URL de acceso directo a la página principal",
- "tooltip": "Configure un acceso directo a la página principal que se mostrará a los usuarios como primer icono debajo de la barra de búsqueda cuando abran una pestaña nueva en Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Redirigir los sitios restringidos a un contexto personal",
- "tooltip": "Configure si se debe permitir a los usuarios realizar la transición a su contexto personal para abrir sitios restringidos."
- }
- },
- "BooleanActions": {
- "allow": "Permitir",
- "block": "Bloquear",
- "configured": "Configurado",
- "disable": "Deshabilitar",
- "dontRequire": "No requerir",
- "enable": "Habilitar",
- "hide": "Ocultar",
- "limit": "Límite",
- "notConfigured": "Sin configurar",
- "require": "Requerir",
- "show": "Mostrar",
- "yes": "Sí"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Poner a disposición de los usuarios como una actualización opcional",
- "optionalValue": "Opcional",
- "required": "Poner a disposición de los usuarios como una actualización necesaria",
- "requiredValue": "Requerido"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 día",
- "twoDays": "2 días",
- "zeroDays": "0 días"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Información general"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Buscar por dispositivo, usuario o versión de actualización de calidad."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "No se pudieron cargar los perfiles de actualización de software de iOS."
- }
- },
- "SummaryBlade": {
- "subtitle": "Perfil de actualización de iOS",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "perfil"
- },
- "listLoadError": "No se pueden cargar los perfiles de actualización de software de iOS; vuelva a intentarlo más tarde.",
- "lowercase": "Directiva de actualización de iOS",
- "uppercase": "Directiva de actualización de iOS"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "No se puede conectar con Apple para obtener la lista de versiones disponibles. Vuelva a intentarlo más tarde o continúe con la última versión.",
- "latestUpdate": "Última actualización",
- "noLongerSupported": "Ya no se admite la versión seleccionada",
- "olderVersionSelected": "Dado que ha seleccionado una versión anterior, asegúrese de aplicar una directiva de restricción de dispositivos que aplace la visibilidad de las actualizaciones de software para que los dispositivos no puedan actualizarse a la última versión.",
- "prefix": "Instalar iOS/iPadOS",
- "selectSupported": "Seleccionar la versión de actualización que admite Apple",
- "updateToInstall": "Actualización para instalar"
- },
- "Schedule": {
- "always": "Actualizar en la siguiente sincronización",
- "duringTimeWindows": "Actualizar durante la hora programada",
- "header": "De forma predeterminada, cuando se asigna una directiva de actualizaciones a un dispositivo, Intune implementa las últimas actualizaciones al sincronizar el dispositivo. En su lugar, puede crear una programación semanal con horas de inicio y finalización personalizadas. Si elige actualizar fuera de la hora programada, Intune no implementará las actualizaciones hasta que finalice dicha hora.",
- "infoBalloon": "Cuándo tendrán lugar las actualizaciones. Se requiere la entrada adicional para programar actualizaciones durante las horas programadas o fuera de estas.",
- "label": "Tipo de programación",
- "outsideActiveHours": "Actualizar fuera de las horas activas (heredado)",
- "outsideTimeWindows": "Actualizar fuera de la hora programada",
- "timeWindow": "Período de tiempo",
- "timeZone": "Zona horaria",
- "title": "Actualizar la configuración de programación de directiva:",
- "weekly": "Programación semanal",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "Versión de iOS/iPadOS que se va a instalar en los dispositivos en el momento de la actualización.",
- "label": "Seleccionar la versión para instalar"
- },
- "header": "Crear un perfil para forzar a los dispositivos asignados a instalar automáticamente las últimas actualizaciones de iOS/iPadOS. Estos ajustes determinan cómo y cuándo se implementan las actualizaciones de software. Este perfil no impide que los usuarios actualicen el sistema operativo manualmente, lo que puede evitarse durante un máximo de 90 días con una política de restricción de configuración de dispositivos. Las actualizaciones sólo se aplicarán a los dispositivos supervisados.",
- "notAvailable": "N/D"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "No hay directivas de actualización de iOS para mostrar",
- "macOsUpdates": "No hay directivas de actualización de software macOS para mostrar",
- "windowsUpdates": "No hay anillos de actualización de Windows 10 y versiones posteriores para mostrar."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Nombre del dispositivo",
- "deviceUpdateStatus": "Estado de actualización del dispositivo",
- "lastUpdated": "Última actualización",
- "osVersion": "Versión del SO",
- "userPrincipalName": "Nombre de usuario"
- },
- "maximumOSVersionFilter": "Versión máxima del sistema operativo",
- "minimumOSVersionFilter": "Versión mínima del sistema operativo",
- "noData": "No hay datos para mostrar.",
- "searchBoxPlaceholder": "Buscar por nombre de dispositivo, nombre de usuario o versión de sistema operativo",
- "title": "Resumen de cuentas para dispositivos macOS"
- },
- "Category": {
- "configurationDataFile": "Archivo de datos de configuración",
- "critical": "Crítico",
- "firmware": "Firmware",
- "other": "Otro"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Última actualización",
- "successfulUpdateCount": "Actualizaciones correctas implementadas",
- "totalUpdateCount": "Total de actualizaciones implementadas",
- "updateCategory": "Categoría de actualización",
- "updateCategoryStatus": "Estado de la categoría de actualización"
- },
- "noData": "No hay datos para mostrar."
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "No se pudieron cargar los perfiles de actualización de software de macOS."
- }
- },
- "State": {
- "available": "Disponible",
- "commandFailed": "Error del comando",
- "downloadFailed": "Error en la descarga.",
- "downloadInsufficientNetwork": "Red insuficiente para la descarga",
- "downloadInsufficientPower": "Potencia insuficiente para la descarga",
- "downloadInsufficientSpace": "Espacio insuficiente para la descarga",
- "downloaded": "Descargado",
- "downloading": "Descargando",
- "idle": "Inactivo",
- "installFailed": "No se pudo realizar la instalación",
- "installInsufficientPower": "Potencia insuficiente para la instalación",
- "installInsufficientSpace": "Espacio insuficiente para la instalación",
- "installing": "Instalando",
- "scheduled": "Programada",
- "success": "Correcto",
- "unknown": "Desconocido"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Última actualización",
- "updateName": "Nombre de actualización",
- "updateStatus": "Estado de actualización",
- "version": "Versión"
- },
- "noData": "No hay datos para mostrar.",
- "searchBoxPlaceholder": "Buscar por nombre o versión de actualización"
- },
- "SummaryBlade": {
- "subtitle": "Perfil de actualización de macOS",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Perfil"
- },
- "error": "Error",
- "errorOrErrors": "Errores",
- "errors": "Errores",
- "listLoadError": "No se pueden cargar los perfiles de actualización de software de macOS; vuelva a intentarlo más tarde.",
- "lowercase": "Directiva de actualización de macOS",
- "other": "Otro",
- "subtitle": "Actualización de software de MacOS",
- "upToDate": "Actualizado",
- "uppercase": "Directiva de actualización de macOS"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Vuelva a intentarlo más tarde",
- "title": "No se pudo eliminar {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Vuelva a intentarlo más tarde"
- },
- "LoadConfigurationFailed": {
- "description": "Vuelva a intentarlo más tarde",
- "title": "Error al cargar {0}"
- },
- "idWrongFormat": "El identificador proporcionado para el perfil no tiene el formato esperado."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "Debe seleccionar al menos una ventana de tiempo.",
- "tooMany": "Se puede configurar un máximo de 20 ventanas de tiempo."
- }
- },
- "endDay": "Día de finalización",
- "endTime": "Hora de finalización",
- "startDay": "Día de inicio",
- "startTime": "Hora de inicio",
- "timeWindowError": "Elija una ventana de tiempo que abarque al menos una hora."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "No se pudieron cargar los perfiles de anillo de actualización para Windows 10 y versiones posteriores."
- }
- },
- "SummaryBlade": {
- "subtitle": "Anillo de actualización para Windows 10 y versiones posteriores",
- "title": "Windows Update para empresas"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 y versiones posteriores",
- "title": "Anillo de actualización para Windows 10 y versiones posteriores"
- },
- "listLoadError": "No se pueden cargar los perfiles de anillos de actualización para Windows 10 y versiones posteriores, inténtelo de nuevo más tarde.",
- "lowercase": "Anillo de actualización",
- "uppercase": "Anillo de actualización"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Actualizar configuración de directiva",
- "updateRingSettings": "Configuración del anillo de actualización"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Crear {0}",
- "edit": "Editar {0}"
- }
- },
- "notScannedYet": "Todavía sin detectar",
- "outOfDateIosDevices": "Dispositivos iOS no actualizados"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Restricciones de dispositivos (propietario del dispositivo)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "Directiva de actualización de iOS"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Es igual a",
+ "greaterThan": "Mayor que",
+ "greaterThanOrEqualTo": "Mayor o igual que",
+ "lessThan": "Menor que",
+ "lessThanOrEqualTo": "Menor o igual que",
+ "notEqualTo": "No igual a"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Exigir comprobación de firma del script y ejecutarlo silenciosamente",
+ "enforceSignatureCheckTooltip": "Seleccione \"Sí\" para comprobar que el script está firmado por un editor de confianza, lo que permite ejecutarlo sin que se muestren advertencias ni avisos. El script se ejecutará sin bloqueos. Seleccione \"No\" (predeterminado) para ejecutarlo con la confirmación del usuario final sin comprobación de la firma.",
+ "header": "Usar un script de detección personalizado",
+ "runAs32Bit": "Ejecutar script como proceso de 32 bits en clientes de 64 bits",
+ "runAs32BitTooltip": "Seleccione \"Sí\" para ejecutar el script en un proceso de 32 bits en clientes de 64 bits. Seleccione \"No\" (predeterminado) para ejecutarlo en un proceso de 64 bits en clientes de 64 bits. Los clientes de 32 bits ejecutan el script en un proceso de 32 bits.",
+ "scriptContent": "Contenido del script",
+ "scriptFile": "Archivo de script",
+ "scriptFileNotSelectedValidation": "No hay ningún archivo de script seleccionado.",
+ "scriptFileTooltip": "Seleccione un script de PowerShell que detecte la presencia de la aplicación en el cliente. La aplicación se detectará cuando el script devuelva un código de salida de valor 0 y escriba un valor de cadena en STDOUT.",
+ "scriptSizeLimitValidation": "El script de detección supera el tamaño máximo permitido. Para resolverlo, reduzca el tamaño del script de detección."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Fecha de creación",
+ "dateModified": "Fecha de modificación",
+ "doesNotExist": "El archivo o la carpeta no existe.",
+ "fileOrFolderExists": "El archivo o la carpeta existe",
+ "sizeInMB": "Tamaño en MB",
+ "version": "Cadena (versión)"
+ },
+ "associatedWith32Bit": "Asociado a una aplicación de 32 bits en clientes de 64 bits",
+ "associatedWith32BitTooltip": "Seleccione \"Sí\" para expandir las variables de entorno de ruta de acceso en el contexto de 32 bits en clientes de 64 bits. Seleccione \"No\" (predeterminado) para expandir las variables de ruta de acceso en el contexto de 64 bits en clientes de 64 bits. Los clientes de 32 bits siempre usan el contexto de 32 bits.",
+ "detectionMethod": "Método de detección",
+ "detectionMethodTooltip": "Seleccione el tipo de método de detección que se usa para validar la presencia de la aplicación.",
+ "fileOrFolder": "Archivo o carpeta",
+ "fileOrFolderToolTip": "El archivo o la carpeta para detectar.",
+ "operator": "Operador",
+ "operatorTooltip": "Seleccione el operador para el método de detección que se usa para validar la comparación.",
+ "path": "Ruta de acceso",
+ "pathTooltip": "Ruta de acceso completa de la carpeta que contiene el archivo o la carpeta para detectar.",
+ "value": "Valor",
+ "valueTooltip": "Seleccione un valor que coincida con el método de detección seleccionado. Los métodos de detección de fecha deben especificarse en la hora local."
+ },
+ "GridColumns": {
+ "pathOrCode": "Ruta o código",
+ "type": "Tipo"
+ },
+ "MsiRule": {
+ "operator": "Operador",
+ "operatorTooltip": "Seleccione el operador para la comparación de validación de versión del producto MSI.",
+ "productCode": "Código de producto MSI",
+ "productCodeTooltip": "Código de producto MSI válido para la aplicación.",
+ "productVersion": "Valor",
+ "productVersionCheck": "Comprobación de versión del producto MSI",
+ "productVersionCheckTooltip": "Seleccione \"Sí\" para comprobar la versión del producto MSI junto con su código correspondiente.",
+ "productVersionTooltip": "Especifique la versión del producto MSI para la aplicación."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Comparación de enteros",
+ "keyDoesNotExist": "La clave no existe",
+ "keyExists": "La clave existe",
+ "stringComparison": "Comparación de cadena",
+ "valueDoesNotExist": "El valor no existe",
+ "valueExists": "El valor existe",
+ "versionComparison": "Comparación de versiones"
+ },
+ "associatedWith32Bit": "Asociado a una aplicación de 32 bits en clientes de 64 bits",
+ "associatedWith32BitTooltip": "Seleccione \"Sí\" para buscar en el Registro de 32 bits en clientes de 64 bits. Seleccione \"No\" (predeterminado) para buscar en el Registro de 64 bits en clientes de 64 bits. Los clientes de 32 bits siempre buscan en el Registro de 32 bits.",
+ "detectionMethod": "Método de detección",
+ "detectionMethodTooltip": "Seleccione el tipo de método de detección que se usa para validar la presencia de la aplicación.",
+ "keyPath": "Ruta de acceso de la clave",
+ "keyPathTooltip": "La ruta de acceso completa de la entrada del Registro que contiene el valor para detectar.",
+ "operator": "Operador",
+ "operatorTooltip": "Seleccione el operador para el método de detección que se usa para validar la comparación.",
+ "value": "Valor",
+ "valueName": "Nombre de valor",
+ "valueNameTooltip": "El nombre del valor de Registro para detectar.",
+ "valueTooltip": "Seleccione un valor que coincida con el método de detección elegido."
+ },
+ "RuleTypeOptions": {
+ "file": "Archivo",
+ "mSI": "MSI",
+ "registry": "Registro"
+ },
+ "gridAriaLabel": "Reglas de detección",
+ "header": "Cree una regla que indique la presencia de la aplicación.",
+ "noRulesSelectedPlaceholder": "No se ha especificado ninguna regla.",
+ "ruleTableLimit": "Puede agregar hasta 25 reglas de detección.",
+ "ruleType": "Tipo de regla",
+ "ruleTypeTooltip": "Elija el tipo de regla de detección que se va a agregar."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Usar un script de detección personalizado",
+ "manual": "Configurar manualmente las reglas de detección"
+ },
+ "bladeTitle": "Reglas de detección",
+ "header": "Configure reglas específicas de la aplicación que se usen para detectar la presencia de esta.",
+ "rulesFormat": "Formato de las reglas",
+ "rulesFormatTooltip": "Elija configurar manualmente las reglas de detección o use un script personalizado para detectar la presencia de la aplicación.",
+ "selectorLabel": "Reglas de detección"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Aceptar los términos de licencia de software de Microsoft en nombre de los usuarios",
"appSuiteConfigurationLabel": "Configuración del conjunto de aplicaciones",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "Idiomas seleccionados: {0}",
"xmlConfigurationLabel": "Configuración de XML"
},
- "Filters": {
- "ruleSyntax": "Sintaxis de regla",
- "filters": "Filtros"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Permitir que el usuario cambie la configuración",
- "tooltip": "Especifique si el usuario tiene permiso para cambiar la configuración."
- },
- "AllowWorkAccounts": {
- "title": "Permitir solo cuentas profesionales o educativas",
- "tooltip": " Si se habilita esta opción, los usuarios no pueden agregar cuentas de almacenamiento y de correo electrónico personales a Outlook. Si un usuario tiene una cuenta personal agregada a Outlook, se le pide que la quite y, si no la quita, no se puede agregar la cuenta profesional o educativa."
- },
- "BlockExternalImages": {
- "title": "Bloquear imágenes externas",
- "tooltip": "Cuando el bloqueo de imágenes externas está habilitado, la aplicación impide la descarga de imágenes hospedadas en Internet que están insertadas en el cuerpo del mensaje. Si se establece como no configurado, la aplicación establece el valor Desactivado de forma predeterminada."
- },
- "ConfigureEmail": {
- "title": "Configurar cuentas de correo electrónico"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "La firma de aplicación predeterminada indica si la aplicación usará \"Obtener Outlook para Android\" como firma predeterminada durante la composición del mensaje. Si la configuración está desactivada, no se usará la firma predeterminada. Sin embargo, los usuarios pueden agregar su propia firma.\r\n\r\nCuando se establece como Sin configurar, la configuración de aplicación predeterminada se establece en Activado.",
- "iOS": "La firma de aplicación predeterminada indica si la aplicación usará \"Obtener Outlook para iOS\" como firma predeterminada durante la composición del mensaje. Si la configuración está desactivada, no se usará la firma predeterminada. Sin embargo, los usuarios pueden agregar su propia firma.\r\n\r\nCuando se establece como Sin configurar, la configuración de aplicación predeterminada se establece en Activado."
- },
- "title": "Firma de aplicación predeterminada"
- },
- "OfficeFeedReplies": {
- "title": "Fuente de detección",
- "tooltip": "Fuente de detección destaca los archivos de Office a los que accede con más frecuencia. Esta fuente se habilita de forma predeterminada si Delve está habilitado para el usuario. Si está sin configurar, la configuración de la aplicación predeterminada se establece como Activa."
- },
- "OrganizeMailByThread": {
- "title": "Organizar el correo por hilos",
- "tooltip": "El comportamiento predeterminado de Outlook es agrupar las conversaciones de correo electrónico en una vista de conversaciones por hilos. Si esta opción está deshabilitada, Outlook muestra cada correo electrónico por separado, sin agrupar los mensajes por hilos."
- },
- "PlayMyEmails": {
- "title": "Reproducir mis correos electrónicos",
- "tooltip": "La característica Reproducir mis correos electrónicos no está habilitada de forma predeterminada en la aplicación, pero se promueve a los usuarios aptos mediante un banner en la bandeja de entrada. Si se establece en Desactivada, no se promociona a los usuarios aptos en la aplicación. Los usuarios pueden optar por habilitar manualmente Reproducir mis correos electrónicos desde la propia aplicación, aunque la característica esté establecida como Desactivada. Si se establece como Sin configurar, la configuración predeterminada de la aplicación es Activada y la característica se promoverá a los usuarios aptos."
- },
- "SuggestedReplies": {
- "title": "Respuestas sugeridas",
- "tooltip": "Al abrir un mensaje, Outlook puede sugerir respuestas debajo de este. Si selecciona una de las respuestas sugeridas, puede editarla antes de enviarla."
- },
- "SyncCalendars": {
- "title": "Sincronizar calendarios",
- "tooltip": "Configure si los usuarios pueden sincronizar su calendario de Outlook con la base de datos y la aplicación de calendario nativo."
- },
- "TextPredictions": {
- "title": "Predicciones de texto",
- "tooltip": "Outlook puede sugerir palabras y frases al redactar mensajes. Cuando Outlook ofrezca una sugerencia, deslice rápidamente el dedo para aceptarla. Cuando se define como no configurada, la configuración de la aplicación predeterminada se establece en Activada."
- },
- "ThemesEnabled": {
- "title": "Temas habilitados",
- "tooltip": "Especifique si el usuario puede usar un tema visual personalizado."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "Dispositivos ChromeOS"
- },
- "ManagedDesktop": {
- "adminContacts": "Contactos del administrador",
- "appPackaging": "Empaquetado de aplicaciones",
- "autopatchGroups": "Grupos de Autopatch",
- "devices": "Dispositivos",
- "featureEnablement": "Activar característica",
- "feedback": "Comentarios",
- "gettingStarted": "Introducción",
- "messages": "Mensajes",
- "onlineResources": "Recursos en línea",
- "policyHealth": "Directivas de mantenimiento",
- "policyHealthPreview": "Estado de la directiva (versión preliminar)",
- "releaseManagement": "Administración de versiones",
- "serviceRequests": "Solicitudes de servicio",
- "settings": "Configuración",
- "supportRequests": "Solicitudes de soporte técnico",
- "tenantEnrollment": "Inscripción de inquilinos",
- "tenantManagement": "Administración de espacios empresariales"
- },
- "actions": "Acciones en caso de incumplimiento",
- "advancedExchangeSettings": "Configuración de Exchange Online",
- "advancedThreatProtection": "Microsoft Defender for Endpoint",
- "allApps": "Todas las aplicaciones",
- "allDevices": "Todos los dispositivos",
- "androidFotaDeployments": "Implementaciones de Android FOTA",
- "appBundles": "Lotes de aplicaciones",
- "appCategories": "Categorías de aplicaciones",
- "appConfigPolicies": "Directivas de configuración de aplicaciones",
- "appConfigurationStatus": "Estado de App Configuration",
- "appInstallStatus": "Estado de instalación de la aplicación",
- "appLicences": "Licencias de aplicación",
- "appProtectionPolicies": "Directivas de protección de aplicaciones",
- "appProtectionStatus": "Estado de protección de la aplicación",
- "appSelectiveWipe": "Borrado selectivo de aplicaciones",
- "appleVppTokens": "Tokens de VPP de Apple",
- "apps": "Aplicaciones",
- "assign": "Asignaciones",
- "assignedPermissions": "Permisos asignados",
- "assignedRoles": "Roles asignados",
- "autopilotDeploymentReport": "Implementaciones de Autopilot (versión preliminar)",
- "autopilotDeploymentReportV2": "Implementación del Autopilot 2.0 (versión preliminar)",
- "brandingAndCustomization": "Personalización",
- "cartProfiles": "Perfiles de carro",
- "certificateConnectors": "Conectores de certificados",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Dispositivos conectados a la nube (vista previa)",
- "cloudPcActions": "Acciones de CLOUD PC (versión preliminar)",
- "cloudPcMaintenanceWindows": "Ventanas de mantenimiento de PC en la nube (versión preliminar)",
- "compliancePolicies": "Directivas de cumplimiento",
- "complianceScriptManagement": "Scripts",
- "complianceScriptManagementPreview": "Scripts (vista previa)",
- "complianceSettings": "Configuración de directivas de cumplimiento",
- "conditionStatements": "Instrucciones de condición",
- "conditions": "Ubicaciones",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Perfiles de configuración",
- "configurationScripts": "Scripts de configuración",
- "connectorsAndTokens": "Conectores y tokens",
- "corporateDeviceIdentifiers": "Identificadores de dispositivo corporativos",
- "customAttributes": "Atributos personalizados",
- "customNotifications": "Notificaciones personalizadas",
- "deploymentSettings": "Configuración de la implementación",
- "derivedCredentials": "Credenciales derivadas",
- "deviceActions": "Acciones de dispositivo",
- "deviceCategories": "Categorías de dispositivo",
- "deviceCleanUp": "Reglas de limpieza de dispositivos",
- "deviceEnrollmentManagers": "Administradores de inscripción de dispositivos",
- "deviceExecutionStatus": "Estado del dispositivo",
- "deviceLimitEnrollmentRestrictions": "Restricciones de límite de dispositivos inscritos",
- "deviceTypeEnrollmentRestrictions": "Restricciones de la plataforma de dispositivos inscritos",
- "devices": "Dispositivos",
- "discoveredApps": "Aplicaciones detectadas",
- "edgePolicies": "Directivas para Microsoft Edge",
- "embeddedSIM": "Perfiles de telefonía móvil eSIM (versión preliminar)",
- "enrollDevices": "Inscribir dispositivos",
- "enrollmentFailures": "Errores de inscripción",
- "enrollmentNotifications": "Notificaciones de inscripción (vista previa)",
- "enrollmentRestrictions": "Restricciones de inscripción",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Conectores de servicio de Exchange",
- "failuresForCumulativeQualityUpdates": "Errores en la actualización acumulativa de calidad de Windows",
- "failuresForDriverUpdates": "Errores de actualización de controladores de Windows",
- "failuresForFeatureUpdates": "Errores de actualización de características",
- "failuresForQualityUpdates": "Errores en la actualización urgente de Windows",
- "featureFlighting": "Alternancia de características",
- "featureUpdateDeployments": "Actualizaciones de características para Windows 10 y versiones posteriores",
- "flighting": "Distribución de paquetes piloto",
- "fotaUpdate": "Actualización de firmware por vía inalámbrica",
- "groupPolicy": "Plantillas administrativas",
- "groupPolicyAnalytics": "Análisis de directiva de grupo",
- "helpSupport": "Ayuda y soporte técnico",
- "helpSupportReplacement": "Ayuda y soporte técnico ({0})",
- "iOSAppProvisioning": "Perfiles de aprovisionamiento de aplicaciones de iOS",
- "incompleteUserEnrollments": "Inscripciones de usuario incompletas",
- "iosUpdates": "Directivas de actualización para iOS/iPadOS",
- "legacyPcManagement": "Administración de equipos heredados",
- "macOSSoftwareUpdate": "Directivas de actualización para macOS",
- "macOSSoftwareUpdateAccountSummaries": "Estado de instalación de los dispositivos macOS",
- "macOSSoftwareUpdateCategorySummaries": "Resumen de actualizaciones de software",
- "macOSSoftwareUpdateStateSummaries": "actualizaciones",
- "managedGooglePlay": "Google Play administrado",
- "msfb": "Tienda Microsoft para Empresas",
- "myPermissions": "Mis permisos",
- "notifications": "Notificaciones",
- "officeApps": "Aplicaciones de Office",
- "officeProPlusPolicies": "Directivas para las aplicaciones de Office",
- "onPremise": "Local",
- "onPremisesConnector": "Exchange ActiveSync Connector local",
- "onPremisesDeviceAccess": "Dispositivos de Exchange ActiveSync",
- "onPremisesManageAccess": "Acceso a Exchange local",
- "outOfDateIosDevices": "Errores de instalación para dispositivos iOS",
- "overview": "Información general",
- "partnerDeviceManagement": "Administración de dispositivos de socio",
- "perUpdateRingDeploymentState": "Estado de implementación por anillo de actualización",
- "permissions": "Permisos",
- "platformApps": "{0} aplicaciones",
- "platformDevices": "{0} dispositivos",
- "platformEnrollment": "Inscripción de {0}",
- "policies": "Directivas",
- "profiles": "Perfiles",
- "properties": "Propiedades",
- "reports": "Informes",
- "retireNoncompliantDevices": "Retirar dispositivos no conformes",
- "retireNoncompliantDevicesPreview": "Retirar dispositivos no conformes (versión preliminar)",
- "role": "Rol",
- "scriptManagement": "Scripts",
- "securityBaselines": "Líneas base de seguridad",
- "serviceToServiceConnector": "Conector de Exchange Online",
- "servicenowConnector": "Conector de ServiceNow",
- "shellScripts": "Scripts de Shell",
- "teamViewerConnector": "Conector de TeamViewer",
- "telecomeExpenseManagement": "Administración de gastos de telecomunicaciones",
- "tenantAdmin": "Administrador de inquilinos",
- "tenantAdministration": "Administración de inquilinos",
- "termsAndConditions": "Términos y condiciones",
- "titles": "Títulos",
- "troubleshoot": "Solucionar problemas",
- "troubleshootSupport": "Solución de problemas + soporte técnico",
- "user": "Usuario",
- "userExecutionStatus": "Estado del usuario",
- "wdacSupplementalPolicies": "Directivas complementarias del modo S",
- "win32CatalogUpdateApp": "Actualizaciones para aplicaciones de administración de aplicaciones empresariales",
- "win32CatalogUpdateAppInPreview": "Actualizaciones para aplicaciones de catálogo de Windows (Win32) (versión preliminar)",
- "windows10DriverUpdate": "Actualizaciones de controladores para Windows 10 y versiones posteriores",
- "windows10QualityUpdate": "Actualizaciones de calidad para Windows 10 y versiones posteriores",
- "windows10UpdateRings": "Anillos de actualización para Windows 10 y versiones posteriores",
- "windows10XPolicyFailures": "Errores de directiva de Windows 10X",
- "windows365PartnerConnector": "Conectores de socios de Windows 365",
- "windowsDiagnosticData": "Datos de Windows",
- "windowsEnterpriseCertificate": "Certificado de Windows Enterprise",
- "windowsManagement": "Scripts",
- "windowsSideLoadingKeys": "Claves de instalación de prueba de Windows",
- "windowsSymantecCertificate": "Certificado DigiCert de Windows",
- "windowsThreatReport": "Estado del agente de amenazas"
- },
- "ScopeTypes": {
- "allDevices": "Todos los dispositivos",
- "allUsers": "Todos los usuarios",
- "allUsersAndDevices": "Todos los usuarios y todos los dispositivos",
- "selectedGroups": "Grupos seleccionados"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Búsqueda de Microsoft como opción predeterminada",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype Empresarial",
- "oneDrive": "OneDrive Escritorio",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone y iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Sin soporte técnico",
+ "supportEnding": "Próximo al fin del soporte técnico",
+ "supported": "Con soporte técnico"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Predeterminado",
- "header": "Prioridad de actualización",
- "postponed": "Pospuesto",
- "priority": "Prioridad alta"
- },
- "AutoUpdateSupersededApps": {
- "label": "Actualizar automáticamente",
- "sublabel": "Si el usuario ha instalado aplicaciones que se han sustituido desde el Portal de empresa, es necesario instalar la aplicación de sustitución."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Fondo",
- "displayText": "Descarga de contenido en {0}",
- "foreground": "Primer plano",
- "header": "Prioridad de optimización de distribución"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Permitir al usuario posponer la notificación de reinicio",
- "countdownDialog": "Seleccionar cuándo debe mostrarse el cuadro de diálogo de cuenta regresiva de reinicio antes de producirse el reinicio (minutos)",
- "durationInMinutes": "Período de gracia de reinicio del dispositivo (minutos)",
- "snoozeDurationInMinutes": "Seleccionar la duración del aplazamiento (minutos)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Zona horaria",
- "local": "Zona horaria del dispositivo",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Fecha y hora",
- "deadlineTimeColumnLabel": "Fecha límite de instalación",
- "deadlineTimeDatePickerErrorMessage": "La fecha seleccionada debe ser posterior a la fecha de disponibilidad.",
- "deadlineTimeLabel": "Fecha límite de instalación de la aplicación",
- "defaultTime": "Lo antes posible",
- "infoText": "Esta aplicación estará disponible tan pronto como se haya implementado, a menos que especifique un tiempo de disponibilidad a continuación. Si se trata de una aplicación necesaria, puede especificar la fecha límite de instalación.",
- "specificTime": "Fecha y hora específicas",
- "startTimeColumnLabel": "Disponibilidad",
- "startTimeDatePickerErrorMessage": "La fecha seleccionada debe ser anterior a la fecha límite.",
- "startTimeLabel": "Disponibilidad de la aplicación"
- },
- "restartGracePeriodHeader": "Período de gracia de reinicio",
- "restartGracePeriodLabel": "Período de gracia de reinicio del dispositivo",
- "summaryTitle": "Experiencia del usuario final"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "El archivo o la carpeta como requisito seleccionado.",
- "pathToolTip": "La ruta de acceso completa del archivo o la carpeta que se detectará.",
- "property": "Propiedad",
- "valueToolTip": "Seleccione un valor de requisito que coincida con el método de detección seleccionado. Se debe especificar el requisito de fecha y hora en el formato local."
- },
- "GridColumns": {
- "pathOrScript": "Ruta de acceso o script",
- "type": "Tipo"
- },
- "Registry": {
- "keyPath": "Ruta de acceso de la clave",
- "keyPathTooltip": "La ruta de acceso completa de la entrada del Registro que contiene el valor como un requisito.",
- "operator": "Operator",
- "operatorTooltip": "Seleccione el operador para la comparación.",
- "registryRequirement": "Requisito de clave de registro",
- "registryRequirementTooltip": "Seleccione la comparación de requisitos de clave del Registro.",
- "valueName": "Nombre de valor",
- "valueNameTooltip": "El nombre del valor de Registro necesario."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Aprobar automáticamente todas las actualizaciones de controladores recomendadas",
+ "manual": "Aprobar e implementar manualmente actualizaciones de controladores"
+ },
+ "BulkActions": {
+ "button": "Acciones en masa"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Método de aprobación:"
},
- "RequirementTypeOptions": {
- "fileType": "Archivo",
- "registry": "Registro",
- "script": "Script"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Booleano",
- "dateTime": "Fecha y hora",
- "float": "Punto flotante",
- "integer": "Entero",
- "string": "Cadena",
- "version": "Versión"
- },
- "duplicateName": "El nombre de script {0} ya se ha usado. Especifique otro nombre.",
- "enforceSignatureCheck": "Exigir comprobación de firma del script",
- "enforceSignatureCheckTooltip": "Seleccione \"Sí\" para comprobar que el script está firmado por un editor de confianza, lo que permite ejecutarlo sin advertencias ni avisos. El script se ejecutará desbloqueado. Seleccione \"No\" (predeterminado) para ejecutarlo con la confirmación del usuario final, pero sin comprobación de firma.",
- "loggedOnCredentials": "Ejecutar este script con las credenciales de inicio de sesión",
- "loggedOnCredentialsTooltip": "Ejecutar script mediante las credenciales del dispositivo que ha iniciado sesión.",
- "operatorTooltip": "Seleccione el operador para la comparación de requisitos.",
- "requirementMethod": "Seleccionar el tipo de datos de salida",
- "requirementMethodTooltip": "Seleccione el tipo de datos usado al determinar un requisito de coincidencia de detección.",
- "scriptContent": "Contenido del script",
- "scriptFile": "Archivo de script",
- "scriptFileTooltip": "Seleccione un script de PowerShell que detecte la presencia de la aplicación en el cliente. Si se detecta la aplicación, el proceso de requisitos proporcionará un código de salida con un valor de 0 y escribirá un valor de cadena en STDOUT.",
- "scriptName": "Nombre del script",
- "value": "Valor",
- "valueTooltip": "Seleccione un valor de requisito que coincida con el método de detección seleccionado. Se debe especificar el requisito de fecha y hora en el formato local."
+ "DeploymentDeferralInDays": {
+ "label": "Hacer que las actualizaciones estén disponibles después de",
+ "units": "(días)",
+ "value": "{0} días"
+ },
+ "DriverAction": {
+ "header": "Seleccione una acción a continuación.",
+ "label": "Acción del controlador",
+ "placeholder": "Seleccionar una acción"
},
- "bladeTitle": "Agregar una regla de requisitos",
- "createRequirementHeader": "Cree un requisito.",
- "header": "Configurar reglas de requisitos adicionales",
- "label": "Reglas de requisitos adicionales",
- "noRequirementsSelectedPlaceholder": "No se ha especificado ningún requisito.",
- "requirementType": "Tipo de requisito",
- "requirementTypeTooltip": "Elija el tipo de método de detección utilizado para determinar cómo se valida un requisito."
- },
- "architectures": "Arquitectura del sistema operativo",
- "architecturesTooltip": "Elija las arquitecturas necesarias para instalar la aplicación.",
- "bladeTitle": "Requisitos",
- "diskSpace": "Espacio en disco necesario (MB)",
- "diskSpaceTooltip": "Espacio en disco libre necesario en la unidad del sistema para instalar la aplicación.",
- "header": "Especifique los requisitos que deben cumplir los dispositivos antes de instalar la aplicación:",
- "maximumTextFieldValue": "El valor debe ser como máximo de {0}.",
- "minimumCpuSpeed": "Velocidad de CPU mínima requerida (MHz)",
- "minimumCpuSpeedTooltip": "La velocidad de CPU mínima necesaria para instalar la aplicación.",
- "minimumLogicalProcessors": "Número mínimo de procesadores lógicos necesarios",
- "minimumLogicalProcessorsTooltip": "El número mínimo de procesadores lógicos necesarios para instalar la aplicación.",
- "minimumOperatingSystem": "Versión mínima del sistema operativo",
- "minimumOperatingSystemTooltip": "Seleccione la versión mínima del sistema operativo necesaria para instalar la aplicación.",
- "minumumTextFieldValue": "El valor debe ser como mínimo de {0}.",
- "physicalMemory": "Memoria física requerida (MB)",
- "physicalMemoryTooltip": "Memoria física (RAM) necesaria para instalar la aplicación.",
- "selectorLabel": "Requisitos",
- "validNumber": "Especifique un número válido."
- },
- "PolicySet": {
- "appManagement": "Administración de aplicaciones",
- "assignments": "Asignaciones",
- "basics": "Básico",
- "deviceEnrollment": "Inscripción de dispositivos",
- "deviceManagement": "Administración de dispositivos",
- "scopeTags": "Etiquetas de ámbito",
- "appConfigurationTitle": "Directivas de configuración de aplicaciones",
- "appProtectionTitle": "Directivas de protección de aplicaciones",
- "appTitle": "Aplicaciones",
- "iOSAppProvisioningTitle": "Perfiles de aprovisionamiento de aplicaciones de iOS",
- "deviceLimitRestrictionTitle": "Restricciones de límite de dispositivos",
- "deviceTypeRestrictionTitle": "Restricciones de tipo de dispositivo",
- "enrollmentStatusSettingTitle": "Páginas de estado de la inscripción",
- "windowsAutopilotDeploymentProfileTitle": "Perfiles de Windows Autopilot Deployment",
- "deviceComplianceTitle": "Directivas de cumplimiento de dispositivos",
- "deviceConfigurationTitle": "Perfiles de configuración de dispositivos",
- "powershellScriptTitle": "Scripts de PowerShell"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Controladores incluidos"
+ },
+ "SelectDrivers": {
+ "header": "Seleccionar controladores para incluirlos en la acción masiva"
+ },
+ "SelectDriversToInclude": {
+ "button": "Seleccionar controladores para incluir"
+ },
+ "SelectLessDrivers": {
+ "validation": "Como máximo, se pueden seleccionar cien controladores"
+ },
+ "SelectMoreDrivers": {
+ "validation": "Debe seleccionarse al menos un controlador"
+ },
+ "SelectedDrivers": {
+ "label": "Controladores seleccionados"
+ },
+ "availabilityDate": "Hacer disponible en Windows Update",
+ "bladeTitle": "Actualizaciones de controladores para Windows 10 y versiones posteriores (versión preliminar)",
+ "lastSync": "Última sincronización:",
+ "lastSyncDefaultText": "Recopilación de inventario inicial pendiente",
+ "loadError": "Error al cargar."
+ },
+ "DriverStatus": {
+ "approved": "Aprobado",
+ "declined": "Rechazado",
+ "export": "Exportando los controladores recomendados",
+ "needsReview": "Necesita revisión",
+ "paused": "En pausa"
+ },
+ "DriversToReview": {
+ "text": "{0} para revisar"
+ },
+ "Subtitle": {
+ "automatic": "Directiva de actualización del controlador de aprobación automática",
+ "manual": "Directiva de actualización del controlador de aprobación manual"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Recomendado",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Baréin",
- "countryNameZA": "Sudáfrica",
- "countryNameJO": "Jordania",
- "countryNameSD": "Sudán",
- "countryNameNU": "Niue",
- "countryNameCZ": "República Checa",
- "countryNameLT": "Lituania",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "RAE de Hong Kong",
- "countryNameGH": "Ghana",
- "countryNameSA": "Arabia Saudí",
- "countryNamePG": "Papúa Nueva Guinea",
- "countryNameBW": "Botsuana",
- "countryNameDG": "Diego García",
- "countryNameIN": "India",
- "countryNameHN": "Honduras",
- "countryNameRO": "Rumanía",
- "countryNameKZ": "Kazajistán",
- "countryNameLC": "Santa Lucía",
- "countryNameGE": "Georgia",
- "countryNameTT": "Trinidad y Tobago",
- "countryNameMP": "Islas Marianas del Norte",
- "countryNameMV": "Maldivas",
- "countryNameFI": "Finlandia",
- "countryNameNO": "Noruega",
- "countryNameEE": "Estonia",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Uzbekistán",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tayikistán",
- "countryNameAW": "Aruba",
- "countryNameFR": "Francia",
- "countryNameOM": "Omán",
- "countryNameAO": "Angola",
- "countryNameIT": "Italia",
- "countryNameAZ": "Azerbaiyán",
- "countryNameKG": "Kirguistán",
- "countryNameWF": "Wallis y Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Islas Malvinas",
- "countryNameGY": "Guyana",
- "countryNameSS": "Sudán del Sur",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haití",
- "countryNameSY": "Siria",
- "countryNameMD": "Moldova",
- "countryNameVC": "San Vicente y las Granadinas",
- "countryNameID": "Indonesia",
- "countryNameRE": "Reunión",
- "countryNameER": "Eritrea",
- "countryNameMK": "Macedonia del Norte",
- "countryNameTG": "Togo",
- "countryNamePF": "Polinesia Francesa",
- "countryNameKY": "Islas Caimán",
- "countryNameIO": "Territorio Británico del Océano Índico",
- "countryNameRU": "Rusia",
- "countryNameMA": "Marruecos",
- "countryNameAU": "Australia",
- "countryNameBO": "Bolivia",
- "countryNameVA": "La Santa Sede (Estado de la Ciudad del Vaticano)",
- "countryNameVG": "Islas Vírgenes Británicas",
- "countryNameFM": "Micronesia",
- "countryNameAQ": "Antártida",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brasil",
- "countryNameIS": "Islandia",
- "countryNamePE": "Perú",
- "countryNameBG": "Bulgaria",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamas, Las",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macao RAE",
- "countryNameRW": "Ruanda",
- "countryNameAS": "Samoa Americana",
- "countryNameBQ": "Bonaire, San Eustaquio y Saba",
- "countryNameMF": "San Martín",
- "countryNameTM": "Turkmenistán",
- "countryNameML": "Malí",
- "countryNameTO": "Tonga",
- "countryNameNC": "Nueva Caledonia",
- "countryNameAC": "Isla Ascensión",
- "countryNameBN": "Brunéi",
- "countryNameBD": "Bangladés",
- "countryNameMW": "Malaui",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabón",
- "countryNameCA": "Canadá",
- "countryNameSH": "Santa Elena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolia",
- "countryNamePA": "Panamá",
- "countryNameCM": "Camerún",
- "countryNameNE": "Níger",
- "countryNameCW": "Curazao",
- "countryNameJP": "Japón",
- "countryNameCY": "Chipre",
- "countryNameCD": "República Democrática del Congo",
- "countryNameTN": "Túnez",
- "countryNameTR": "Turquía",
- "countryNameWS": "Samoa",
- "countryNameSE": "Suecia",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Camboya",
- "countryNamePL": "Polonia",
- "countryNameDZ": "Argelia",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominica",
- "countryNameEG": "Egipto",
- "countryNameGF": "Guayana Francesa",
- "countryNameNZ": "Nueva Zelanda",
- "countryNamePS": "Autoridad Palestina",
- "countryNameIL": "Israel",
- "countryNameSL": "Sierra Leona",
- "countryNameGR": "Grecia",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauritania",
- "countryNameVI": "Islas Vírgenes de EE. UU.",
- "countryNameGQ": "Guinea Ecuatorial",
- "countryNameMX": "México",
- "countryNameDJ": "Yibuti",
- "countryNameGN": "Guinea",
- "countryNameCN": "China",
- "countryNameMZ": "Mozambique",
- "countryNameBV": "Isla Bouvet",
- "countryNameNF": "Isla Norfolk",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguila",
- "countryNameGS": "Georgia del Sur e Islas Sandwich del Sur",
- "countryNameRS": "Serbia",
- "countryNameCC": "Islas Cocos",
- "countryNameNA": "Namibia",
- "countryNameDE": "Alemania",
- "countryNameCG": "República del Congo",
- "countryNameKW": "Kuwait",
- "countryNameMH": "Islas Marshall",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarús",
- "countryNameMY": "Malasia",
- "countryNameST": "Santo Tomé y Príncipe",
- "countryNameLS": "Lesoto",
- "countryNameBI": "Burundi",
- "countryNameTD": "Chad",
- "countryNameCX": "Isla de Navidad",
- "countryNameIR": "Irán",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bisáu",
- "countryNameUA": "Ucrania",
- "countryNameCU": "Cuba",
- "countryNameCO": "Colombia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Croacia",
- "countryNameSC": "Seychelles",
- "countryNameNL": "Países bajos",
- "countryNameUM": "Islas Ultramarinas Menores de Estados Unidos",
- "countryNameIM": "Isla de Man",
- "countryNameFJ": "Fiyi",
- "countryNameSR": "Surinam",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "Reino Unido",
- "countryNameBB": "Barbados",
- "countryNameSI": "Eslovenia",
- "countryNameAM": "Armenia",
- "countryNameAR": "Argentina",
- "countryNamePM": "San Pedro y Miquelón",
- "countryNameTF": "Tierras Australes y Antárticas Francesas",
- "countryNameDO": "República Dominicana",
- "countryNameZW": "Zimbabue",
- "countryNameMQ": "Martinica",
- "countryNamePT": "Portugal",
- "countryNameCF": "República Centroafricana",
- "countryNameBE": "Bélgica",
- "countryNameKM": "Comoras",
- "countryNameLY": "Libia",
- "countryNameIE": "Irlanda",
- "countryNameKP": "Corea del Norte",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Eslovaquia",
- "countryNameTC": "Islas Turcas y Caicos",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Yemen",
- "countryNameBA": "Bosnia y Herzegovina",
- "countryNameGP": "Guadalupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Irak",
- "countryNameSJ": "Islas Svalbard y Jan Mayen",
- "countryNameAX": "Islas Åland",
- "countryNameKE": "Kenia",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermudas",
- "countryNameFO": "Islas Feroe",
- "countryNameBL": "San Bartolomé",
- "countryNameLB": "Líbano",
- "countryNameJM": "Jamaica",
- "countryNameAF": "Afganistán",
- "countryNameES": "España",
- "countryNameMC": "Mónaco",
- "countryNameSG": "Singapur",
- "countryNameAL": "Albania",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Esuatini",
- "countryNameBZ": "Belice",
- "countryNameCI": "Côte d’Ivoire",
- "countryNameTW": "Taiwán",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Islas Cook",
- "countryNameTH": "Tailandia",
- "countryNameHM": "Islas Heard y McDonald",
- "countryNameGD": "Granada",
- "countryNameUS": "Estados Unidos",
- "countryNameAT": "Austria",
- "countryNameKR": "República de Corea",
- "countryNamePK": "Pakistán",
- "countryNameDK": "Dinamarca",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palaos",
- "countryNameET": "Etiopía",
- "countryNameMG": "Madagascar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxemburgo",
- "countryNameQA": "Catar",
- "countryNameBT": "Bután",
- "countryNameSB": "Islas Salomón",
- "countryNameAE": "Emiratos Árabes Unidos",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua y Barbuda",
- "countryNameMU": "Mauricio",
- "countryNameHU": "Hungría",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Suiza",
- "countryNamePN": "Islas Pitcairn",
- "countryNameGL": "Groenlandia",
- "countryNamePH": "Filipinas",
- "countryNameMT": "Malta",
- "countryNameKN": "San Cristóbal y Nieves",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benín",
- "countryNameLV": "Letonia",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "No se puede sincronizar {0}",
+ "failureDescription": "Se ha detectado un error y no se puede completar la sincronización solicitada. Vuelve a intentarlo.",
+ "pending": "{0} sincronización en curso",
+ "pendingDescription": "Se están recuperando los datos más recientes. Este proceso puede tardar varios minutos.",
+ "success": "{0} sincronización completada",
+ "successDescription": "La sincronización con el servicio WUfB se completó en {0}"
+ },
+ "SyncSpinner": {
+ "text": "Hay una sincronización en curso. Esto puede tardar varios minutos. Busque una alerta o vuelva a comprobarla en unos minutos."
+ },
+ "TabName": {
+ "basics": "Datos básicos",
+ "driverUpdateSettings": "Configuración",
+ "otherDrivers": "Otros controladores",
+ "properties": "Propiedades",
+ "recommendedDrivers": "Controladores recomendados"
+ },
+ "driverAddFilter": "Agregar filtro",
+ "driverApplicableDevices": "Dispositivos aplicables",
+ "driverApprovalStatus": "Estado",
+ "driverBulkActions": "Acciones en masa",
+ "driverClass": "Clase de controlador",
+ "driverCount": "Mostrando de {0} a {1} de {2} registros",
+ "driverFilterNoneSelected": "No se ha seleccionado ninguno",
+ "driverManufacturer": "Fabricante",
+ "driverName": "Nombre de controlador",
+ "driverNameLower": "implementación de actualización de controladores de windows",
+ "driverNameUpper": "implementación de actualización de controladores de Windows",
+ "driverRefresh": "Actualizar",
+ "driverReleaseDate": "Fecha de lanzamiento",
+ "driverSearch": "Buscar",
+ "driverSearchKeyword": "Escribir palabra clave de búsqueda",
+ "driverVersion": "Versión",
+ "firstDeploymentDate": "Primera implementación",
+ "infoBoxText": "El inventario puede tardar hasta 24 horas en rellenarse después de asignar y crear una directiva.",
+ "textBlockText": "Seleccione la configuración de implementación y aprobación de directivas. Elija configurar una directiva para aprobar e implementar actualizaciones de forma automática o manual. El método de aprobación no se puede cambiar una vez creada una directiva, pero los cambios en las aprobaciones de controladores individuales y los detalles de implementación serán posibles una vez que se compile un inventario para los dispositivos asignados."
+ },
+ "TACSettings": {
+ "edgeSettings": "Valores de configuración de Edge",
+ "edgeWindowsDataProtectionSettings": "Configuración de protección de datos de Microsoft Edge (Windows) - Versión preliminar",
+ "edgeWindowsSettings": "Opciones de configuración de Microsoft Edge (Windows) - Versión preliminar",
+ "generalAppConfig": "Configuración general de la aplicación",
+ "generalSettings": "Opciones de configuración generales",
+ "outlookSMIMEConfig": "Configuración de S/MIME de Outlook",
+ "outlookSettings": "Valores de configuración de Outlook",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-fr.json b/Documentation/Strings-fr.json
index c54346c..e4ee916 100644
--- a/Documentation/Strings-fr.json
+++ b/Documentation/Strings-fr.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Configuration de la protection des données"
- },
- "OrganizeMailByThread": {
- "title": "Organiser le courrier par conversation",
- "tooltip": "Le comportement par défaut dans Outlook consiste à regrouper les conversations dans une vue par conversation. Si ce paramètre est désactivé, Outlook affiche les courriers individuellement et ne les regroupe pas par conversation."
- },
- "Sync": {
- "header": "Configuration de la synchronisation des champs de contact avec ceux de l'application de contacts native"
- },
- "allowBiometricsAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
- "allowBiometricsTitle": "Exiger des données biométriques pour accéder à l'application",
- "allowBiometricsTooltip": "Des données biométriques, comme TouchID ou FaceID, peuvent être demandées aux utilisateurs pour leur permettre d'accéder à l'application sur leur appareil. Le cas échéant, les données biométriques sont utilisées en plus de la méthode d'authentification sélectionnée dans ce profil. N'activez pas ce paramètre si des stratégies Intune App Protection sont déployées, car la stratégie de protection des applications inclut des conditions d'accès préalables à l'accès aux données managées. L'activation des deux entraîne l'affichage de plusieurs invites d'accès à Outlook Mobile. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
- "allowCalendarNotificationsTitle": "Notifications du calendrier",
- "allowCalendarNotificationsTooltip": "Autoriser les notifications de calendrier à afficher tous les détails lorsque le paramètre de stratégie de protection des applications « Notifications des données de l’organisation » est défini sur « Bloquer les données de l’organisation ».",
- "allowDefaultAppSignatureTitle": "Signature d'application par défaut",
- "allowDefaultAppSignatureTooltip": "La signature d'application par défaut indique si l'application utilise « Obtenir Outlook pour iOS » comme signature par défaut pendant la composition du message. Si le paramètre est désactivé, la signature par défaut n'est pas utilisée. Toutefois, les utilisateurs peuvent ajouter leur propre signature. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Activé.",
- "allowExternalRecipientsMailTipTitle": "Info courrier Destinataires externes",
- "allowExternalRecipientsMailTipTooltip": "L’info courrier Destinataires externes s’affiche si l’expéditeur ajoute un destinataire externe ou un groupe de distribution contenant des destinataires externes. Cette info courrier informe les expéditeurs que le message qu’ils composent va sortir de l’organisation, les incitant ainsi à adapter la formulation, le ton et le contenu de leur message. Disponible uniquement pour les comptes Exchange Online et les comptes locaux tirant parti de l’authentification moderne hybride. S’il n’est pas configuré, le paramètre d’application par défaut a la valeur Activé.",
- "allowFocusedInboxTitle": "Boîte de réception Prioritaire",
- "allowFocusedInboxTooltip": "La boîte de réception Prioritaire divise votre boîte de réception en deux onglets : Prioritaire et Autres. Les e-mails les plus importants apparaissent sous l'onglet Prioritaire, tandis que les autres restent facilement accessibles, mais en retrait, sous l'onglet Autres. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Activé.",
- "allowMailNotificationsAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
- "allowMailNotificationsTitle": "Notifications par e-mail",
- "allowMailNotificationsTooltip": "Cette valeur spécifie si Outlook autorise les notifications de courrier. Pour désactiver ces notifications, affectez la valeur Non.",
- "allowOrgDataOnWearablesTitle": "Données d'organisation sur les wearables",
- "allowOrgDataOnWearablesTooltip": "Cette valeur spécifie si les données Outlook peuvent être synchronisées avec un wearable. Pour désactiver la synchronisation, affectez la valeur Non.",
- "allowSaveContactsAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre de synchronisation des contacts.",
- "allowSaveContactsTitle": "Enregistrer les contacts",
- "allowSaveContactsTooltip": "L'enregistrement de contacts dans le carnet d'adresses natif de l'appareil mobile permet de lier les nouveaux appels et SMS aux contacts Outlook existants de l'utilisateur. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
- "allowSmartReplyTitle": "Réponses suggérées",
- "allowSmartReplyTooltip": "Quand vous ouvrez un message, Outlook peut suggérer des réponses sous le message. Si vous sélectionnez une réponse suggérée, vous pouvez modifier la réponse avant de l'envoyer. Quand il n'est pas configuré, le paramètre d'application par défaut a la valeur Activé.",
- "allowUserChangeGeneralToolTip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
- "allowUserChangeTitle": "Autoriser l'utilisateur à changer le paramètre",
- "blockExternalImagesAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
- "blockExternalImagesTitle": "Bloquer les images externes",
- "blockExternalImagesTooltip": "Si le blocage des images externes est activé, l'application empêche le téléchargement des images hébergées sur Internet qui sont incorporées dans le corps du message. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
- "disableAddinsTitle": "Autoriser les compléments",
- "disableAddinsTooltip": "Par défaut, une stratégie de protection des applications permet aux utilisateurs d’utiliser des compléments tiers, mais peut être utilisée pour bloquer les compléments avec le paramètre « Synchroniser les données d’application gérées par la stratégie avec des applications natives ou des compléments ». La configuration de ce paramètre sur « Désactivé » bloque les compléments lorsque le paramètre de stratégie de protection des applications est défini sur Autorisé.",
- "discoverFeedTitle": "Flux Discover",
- "discoverFeedTooltip": "Le flux Discover couvre vos fichiers Office les plus fréquemment consultés. Par défaut, ce flux est activé quand Delve est activé pour l'utilisateur. Si l'option n'est pas configurée, le paramètre d'application par défaut est défini sur Activé.",
- "enableSMIMETitle": "Activer S/MIME",
- "enableSMIMETooltip": "Indiquez si les contrôles S/MIME sont activés au moment de la composition d’un e-mail.",
- "encryptAllEmails": "Chiffrer tous les e-mails",
- "encryptAllEmailsAllowUserChangeTooltip": "Indiquez si l’utilisateur est autorisé à changer le paramètre Chiffrer tous les e-mails.",
- "encryptAllEmailsTooltip": "Spécifiez si tous les e-mails doivent être chiffrés. Le chiffrement convertit les données en texte chiffré que seul le destinataire visé peut lire.",
- "ldapUrl": "URL LDAP",
- "ldapUrlTooltip": "Il s’agit du nom d’hôte LDAP où les clients peuvent obtenir les clés de chiffrement publiques pour les destinataires des e-mails. Les e-mails seront chiffrés quand une clé sera disponible. Formats pris en charge :\r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
- "nativeCalendarSyncMAMOnlyTitle": "Autoriser la synchronisation du calendrier",
- "nativeCalendarSyncMAMOnlyTooltip": "Par défaut, une stratégie de protection des applications permet la synchronisation du calendrier avec l’application de calendrier native, mais peut être utilisée pour bloquer la disponibilité de la synchronisation du calendrier. Ce paramètre fonctionne indépendamment du paramètre de stratégie de protection des applications et permet aux organisations de définir si la synchronisation du calendrier est disponible pour les comptes professionnels ou scolaires.",
- "nativeCalendarSyncTitle": "Synchroniser les calendriers",
- "nativeCalendarSyncTooltip": "Par défaut, une stratégie de protection des applications autorise la synchronisation du calendrier avec l’application de calendrier native, mais peut être utilisée pour bloquer la disponibilité de la synchronisation du calendrier avec le paramètre « Synchroniser les données d’application gérées par la stratégie avec les applications natives ou le complément ». La configuration de ce paramètre sur « Désactivé » bloque la synchronisation du calendrier lorsque le paramètre de stratégie de protection des applications est défini sur Autorisé.",
- "playMyEmailsTitle": "Lire mes e-mails",
- "playMyEmailsTooltip": "La fonctionnalité Lire mes e-mails n’est pas activée par défaut dans l’application, mais elle est promue aux utilisateurs éligibles via une bannière dans la boîte de réception. Quand la valeur est Désactivé, cette fonctionnalité n’est pas promue aux utilisateurs éligibles dans l’application. Les utilisateurs peuvent choisir d’activer manuellement Lire mes e-mails à partir de l’application, même si cette fonctionnalité est désactivée. Quand la valeur n’est pas configurée, le paramètre d’application par défaut est activé et la fonctionnalité est promue aux utilisateurs éligibles.",
- "signAllEmails": "Signer tous les e-mails",
- "signAllEmailsAllowUserChangeTooltip": "Indiquez si l’utilisateur est autorisé à changer le paramètre Signer tous les e-mails.",
- "signAllEmailsTooltip": "Spécifiez si tous les e-mails doivent être signés. Une signature numérique vérifie l’authenticité de l’e-mail et garantit que le contenu n’est pas falsifié en transit.",
- "syncAddressTitle": "Adresse",
- "syncAddressTooltip": "Cette valeur spécifie si l'adresse du contact doit être synchronisée avec l'application de contacts native.",
- "syncBirthdayTitle": "Anniversaire",
- "syncBirthdayTooltip": "Cette valeur spécifie si la date de naissance du contact doit être synchronisée avec l'application de contacts native.",
- "syncCompanyTitle": "Société",
- "syncCompanyTooltip": "Cette valeur spécifie si le nom de l'entreprise du contact doit être synchronisé avec l'application de contacts native.",
- "syncDepartmentTitle": "Service",
- "syncDepartmentTooltip": "Cette valeur spécifie si le service du contact doit être synchronisé avec l'application de contacts native.",
- "syncEmailAddressTitle": "Adresse e-mail",
- "syncEmailAddressTooltip": "Cette valeur spécifie si l'adresse e-mail du contact doit être synchronisée avec l'application de contacts native.",
- "syncInstantMessagingAddressTitle": "Adresse de messagerie instantanée",
- "syncInstantMessagingAddressTooltip": "Cette valeur spécifie si l'adresse de messagerie instantanée du contact doit être synchronisée avec l'application de contacts native.",
- "syncJobTitleTitle": "Poste",
- "syncJobTitleTooltip": "Cette valeur spécifie si le poste du contact doit être synchronisé avec l'application de contacts native.",
- "syncNicknameTitle": "Pseudonyme",
- "syncNicknameTooltip": "Cette valeur spécifie si le pseudo du contact doit être synchronisé avec l'application de contacts native.",
- "syncNotesTitle": "Notes",
- "syncNotesTooltip": "Cette valeur spécifie si les notes du contact doivent être synchronisées avec l'application de contacts native.",
- "syncPhoneHomeFaxNumberTitle": "Numéro de télécopie personnel",
- "syncPhoneHomeFaxNumberTooltip": "Cette valeur spécifie si le numéro de télécopie personnel du contact doit être synchronisé avec l'application de contacts native.",
- "syncPhoneHomeNumberTitle": "Numéro de téléphone personnel",
- "syncPhoneHomeNumberTooltip": "Cette valeur spécifie si le numéro de téléphone personnel du contact doit être synchronisé avec l'application de contacts native.",
- "syncPhoneMobileNumberTitle": "Numéro de téléphone mobile",
- "syncPhoneMobileNumberTooltip": "Cette valeur spécifie si le numéro de téléphone mobile du contact doit être synchronisé avec l'application de contacts native.",
- "syncPhoneOtherNumberTitle": "Autre numéro de téléphone",
- "syncPhoneOtherNumberTooltip": "Cette valeur spécifie si le second numéro de téléphone du contact doit être synchronisé avec l'application de contacts native.",
- "syncPhonePagerNumberTitle": "Numéro de récepteur de radiomessagerie",
- "syncPhonePagerNumberTooltip": "Cette valeur spécifie si le numéro de récepteur de radiomessagerie du contact doit être synchronisé avec l'application de contacts native.",
- "syncPhoneWorkFaxNumberTitle": "Numéro de télécopie professionnel",
- "syncPhoneWorkFaxNumberTooltip": "Cette valeur spécifie si le numéro de télécopie professionnel du contact doit être synchronisé avec l'application de contacts native.",
- "syncPhoneWorkNumberTitle": "Numéro de téléphone professionnel",
- "syncPhoneWorkNumberTooltip": "Cette valeur spécifie si le numéro de téléphone professionnel du contact doit être synchronisé avec l'application de contacts native.",
- "syncPrefixTitle": "Préfixe du nom",
- "syncPrefixTooltip": "Cette valeur spécifie si le préfixe du nom du contact doit être synchronisé avec l'application de contacts native.",
- "syncSuffixTitle": "Suffixe du nom",
- "syncSuffixTooltip": "Cette valeur spécifie si le suffixe du nom du contact doit être synchronisé avec l'application de contacts native.",
- "textPredictionsTitle": "Prédictions de texte",
- "textPredictionsTooltip": "Outlook peut suggérer des mots et des expressions quand vous composez des messages. Quand Outlook propose une suggestion, faites un balayage pour l’accepter. Quand l’option n’est pas configurée, le paramètre de l’application par défaut est défini sur Activé.",
- "themesEnabledTitle": "Thèmes activés",
- "themesEnabledTooltip": "Spécifie si l’utilisateur est autorisé à utiliser un thème visuel personnalisé."
- },
- "Languages": {
- "ar-aE": "Arabe (E.A.U.)",
- "ar-bH": "Arabe (Bahreïn)",
- "ar-dZ": "Arabe (Algérie)",
- "ar-eG": "Arabe (Égypte)",
- "ar-iQ": "Arabe (Irak)",
- "ar-jO": "Arabe (Jordanie)",
- "ar-kW": "Arabe (Koweït)",
- "ar-lB": "Arabe (Liban)",
- "ar-lY": "Arabe (Libye)",
- "ar-mA": "Arabe (Maroc)",
- "ar-oM": "Arabe (Oman)",
- "ar-qA": "Arabe (Qatar)",
- "ar-sA": "Arabe (Arabie saoudite)",
- "ar-sY": "Arabe (Syrie)",
- "ar-tN": "Arabe (Tunisie)",
- "ar-yE": "Arabe (Yémen)",
- "az-cyrl": "Azéri (cyrillique, Azerbaïdjan)",
- "az-latn": "Azéri (latin, Azerbaïdjan)",
- "bn-bD": "Bengali (Bangladesh)",
- "bn-iN": "Bengali (Inde)",
- "bs-cyrl": "Bosniaque (cyrillique)",
- "bs-latn": "Bosniaque (latin)",
- "zh-cN": "Chinois (République populaire de Chine)",
- "zh-hK": "Chinois (R.A.S. de Hong-Kong)",
- "zh-mO": "Chinois (Macao R.A.S.)",
- "zh-sG": "Chinois (Singapour)",
- "zh-tW": "Chinois (Taïwan)",
- "hr-bA": "Croate (Latin)",
- "hr-hR": "Croate (Croatie)",
- "nl-bE": "Néerlandais (Belgique)",
- "nl-nL": "Néerlandais (Pays-Bas)",
- "en-aU": "Anglais (Australie)",
- "en-bZ": "Anglais (Belize)",
- "en-cA": "Anglais (Canada)",
- "en-cabn": "Anglais (Caraïbes)",
- "en-iE": "Anglais (Irlande)",
- "en-iN": "Anglais (Inde)",
- "en-jM": "Anglais (Jamaïque)",
- "en-mY": "Anglais (Malaisie)",
- "en-nZ": "Anglais (Nouvelle-Zélande)",
- "en-pH": "Anglais (Philippines)",
- "en-sG": "Anglais (Singapour)",
- "en-tT": "Anglais (Trinité-et-Tobago)",
- "en-uK": "Anglais (Royaume-Uni)",
- "en-uS": "Anglais (États-Unis)",
- "en-zA": "Anglais (Afrique du Sud)",
- "en-zW": "Anglais (Zimbabwe)",
- "fr-bE": "Français (Belgique)",
- "fr-cA": "Français (Canada)",
- "fr-cH": "Français (Suisse)",
- "fr-fR": "Français (France)",
- "fr-lU": "Français (Luxembourg)",
- "fr-mC": "Français (Monaco)",
- "de-aT": "Allemand (Autriche)",
- "de-cH": "Allemand (Suisse)",
- "de-dE": "Allemand (Allemagne)",
- "de-lI": "Allemand (Liechtenstein)",
- "de-lU": "Allemand (Luxembourg)",
- "iu-cans": "Inuktitut (syllabique, Canada)",
- "iu-latn": "Inuktitut (latin, Canada)",
- "it-cH": "Italien (Suisse)",
- "it-iT": "Italien (Italie)",
- "ms-bN": "Malais (Brunéi Darussalam)",
- "ms-mY": "Malais (Malaisie)",
- "mn-cN": "Mongol (mongol traditionnel, RPC)",
- "mn-mN": "Mongol (cyrillique, Mongolie)",
- "no-nB": "Norvégien, Bokmål (Norvège)",
- "no-nn": "Norvégien, Nynorsk (Norvège)",
- "pt-bR": "Portugais (Brésil)",
- "pt-pT": "Portugais (Portugal)",
- "quz-bO": "Quechua (Bolivie)",
- "quz-eC": "Quechua (Équateur)",
- "quz-pE": "Quechua (Pérou)",
- "smj-nO": "Same de Lule (Norvège)",
- "smj-sE": "Same de Lule (Suède)",
- "se-fI": "Same du Nord (Finlande)",
- "se-nO": "Same du Nord (Norvège)",
- "se-sE": "Same du Nord (Suède)",
- "sma-nO": "Same du Sud (Norvège)",
- "sma-sE": "Same du Sud (Suède)",
- "smn": "Same d'Inari (Finlande)",
- "sms": "Same de Skolt (Finlande)",
- "sr-Cyrl-bA": "Serbe (cyrillique)",
- "sr-Cyrl-rS": "Serbe (Cyrillique, Serbie et Monténégro (anciennement))",
- "sr-Latn-bA": "Serbe (Latin)",
- "sr-Latn-rS": "Serbe (latin, Serbie)",
- "dsb": "Bas-sorabe (Allemagne)",
- "hsb": "Haut-sorabe (Allemagne)",
- "es-es-tradnl": "Espagnol (Espagne, Traditionnel)",
- "es-aR": "Espagnol (Argentine)",
- "es-bO": "Espagnol (Bolivie)",
- "es-cL": "Espagnol (Chili)",
- "es-cO": "Espagnol (Colombie)",
- "es-cR": "Espagnol (Costa Rica)",
- "es-dO": "Espagnol (République dominicaine)",
- "es-eC": "Espagnol (Équateur)",
- "es-eS": "Espagnol (Espagne)",
- "es-gT": "Espagnol (Guatemala)",
- "es-hN": "Espagnol (Honduras)",
- "es-mX": "Espagnol (Mexique)",
- "es-nI": "Espagnol (Nicaragua)",
- "es-pA": "Espagnol (Panama)",
- "es-pE": "Espagnol (Pérou)",
- "es-pR": "Espagnol (Porto Rico)",
- "es-pY": "Espagnol (Paraguay)",
- "es-sV": "Espagnol (Salvador)",
- "es-uS": "Espagnol (États-Unis)",
- "es-uY": "Espagnol (Uruguay)",
- "es-vE": "Espagnol (Venezuela)",
- "sv-fI": "Suédois (Finlande)",
- "uz-cyrl": "Ouzbek (cyrillique, Ouzbékistan)",
- "uz-latn": "Ouzbek (latin, Ouzbékistan)",
- "af": "Afrikaans (Afrique du Sud)",
- "sq": "Albanais (Albanie)",
- "am": "Amharique (Éthiopie)",
- "hy": "Arménien (Arménie)",
- "as": "Assamais (Inde)",
- "ba": "Bachkir (Russie)",
- "eu": "Basque (Basque)",
- "be": "Biélorusse (Bélarus)",
- "br": "Breton (France)",
- "bg": "Bulgare (Bulgarie)",
- "ca": "Catalan (Catalan)",
- "co": "Corse (France)",
- "cs": "Tchèque (République tchèque)",
- "da": "Danois (Danemark)",
- "dv": "Maldivien (Maldives)",
- "et": "Estonien (Estonie)",
- "fo": "Féroïen (Îles Féroé)",
- "fil": "Filipino (Philippines)",
- "fi": "Finnois (Finlande)",
- "gl": "Galicien (Galicien)",
- "ka": "Géorgien (Géorgie)",
- "el": "Grec (Grèce)",
- "gu": "Goudjrati (Inde)",
- "ha": "Haoussa (latin, Nigéria)",
- "he": "Hébreu (Israël)",
- "hi": "Hindi (Inde)",
- "hu": "Hongrois (Hongrie)",
- "is": "Islandais (Islande)",
- "ig": "Igbo (Nigéria)",
- "id": "Indonésien (Indonésie)",
- "ga": "Irlandais (Irlande)",
- "xh": "Xhosa (Afrique du Sud)",
- "zu": "Zoulou (Afrique du Sud)",
- "ja": "Japonais (Japon)",
- "kn": "Kannada (Inde)",
- "kk": "Kazakh (Kazakhstan)",
- "km": "Khmer (Cambodge)",
- "rw": "Kinyarwanda (Rwanda)",
- "sw": "Swahili (Kenya)",
- "kok": "Konkani (Inde)",
- "ko": "Coréen (Corée)",
- "ky": "Kirghize (Kirghizistan)",
- "lo": "Lao (RDP Lao)",
- "lv": "Letton (Lettonie)",
- "lt": "Lituanien (Lituanie)",
- "lb": "Luxembourgeois (Luxembourg)",
- "mk": "Macédonien (Macédoine du Nord)",
- "ml": "Malayalam (Inde)",
- "mt": "Maltais (Malte)",
- "mi": "Maori (Nouvelle-Zélande)",
- "mr": "Marathi (Inde)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Népalais (Népal)",
- "oc": "Occitan (France)",
- "or": "Odia (Inde)",
- "ps": "Pachto (Afghanistan)",
- "fa": "Persan",
- "pl": "Polonais (Pologne)",
- "pa": "Pendjabi (Inde)",
- "ro": "Roumain (Roumanie)",
- "rm": "Romanche (Suisse)",
- "ru": "Russe (Russe)",
- "sa": "Sanscrit (Inde)",
- "st": "Sotho du Nord (Afrique du Sud)",
- "tn": "Setswana (Afrique du Sud)",
- "si": "Cingalais (Sri Lanka)",
- "sk": "Slovaque (Slovaquie)",
- "sl": "Slovène (Slovénie)",
- "sv": "Suédois (Suède)",
- "syr": "Syriaque (Syrie)",
- "tg": "Tadjik (cyrillique, Tadjikistan)",
- "ta": "Tamoul (Inde)",
- "tt": "Tatar (Russie)",
- "te": "Télougou (Inde)",
- "th": "Thaï (Thaïlande)",
- "bo": "Tibétain (RPC)",
- "tr": "Turc (Turquie)",
- "tk": "Turkmène (Turkménistan)",
- "uk": "Ukrainien (Ukraine)",
- "ur": "Ourdou (Pakistan)",
- "vi": "Vietnamien (Vietnam)",
- "cy": "Gallois (Royaume-Uni)",
- "wo": "Wolof (Sénégal)",
- "ii": "Yi (RPC)",
- "yo": "Yoruba (Nigéria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender pour point de terminaison",
- "androidDeviceOwnerApplications": "Applications",
- "androidDeviceOwnerPolicyMessages": "Informations de support personnalisées",
- "androidForWorkPassword": "Mot de passe de l'appareil",
- "appManagement": "Autoriser ou bloquer des applications",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Applications restreintes",
- "applicationVisibility": "Afficher ou masquer des applications",
- "applications": "Magasin d'applications",
- "applicationsAndGames": "App Store, affichage de documents, jeux",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Applications et expérience",
- "associatedDomains": "Domaines associés",
- "autonomousSingleAppMode": "Mode App individuelle autonome",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Chiffrement Windows",
- "bootOptions": "Options de démarrage",
- "browser": "Navigateur",
- "builtinApps": "Applications intégrées",
- "cameras": "Appareils photo",
- "cellular": "Cellulaire",
- "cloudAndStorage": "Cloud et stockage",
- "cloudPrint": "Imprimante cloud",
- "complianceEmailProfile": "E-mail",
- "connectedDevices": "Appareils connectés",
- "connectivity": "Mobile et connectivité",
- "contentCaching": "Mise en cache du contenu",
- "controlPanelAndSettings": "Panneau de configuration et paramètres",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Conformité personnalisée",
- "customConfiguration": "Profil de configuration personnalisé",
- "customOMASettings": "Paramètres OMA-URI personnalisés",
- "customPreferences": "Fichier de préférences",
- "dFCISecuritySettings": "Paramètres de sécurité",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Pare-feu Windows",
- "defenderLocalSecurityOptions": "Options de sécurité locales de l'appareil",
- "defenderSecurityCenter": "Microsoft Defender Security Center",
- "deliveryOptimization": "Optimisation de livraison",
- "derivedCredentialAuthenticationConfiguration": "Information d’identification dérivée",
- "deviceExperience": "Expérience de l’appareil",
- "deviceFirmwareConfigurationInterface": "Interface de configuration du microprogramme d'appareil",
- "deviceGuard": "Microsoft Defender Application Control",
- "deviceHealth": "Intégrité de l'appareil",
- "devicePassword": "Mot de passe de l’appareil",
- "deviceProperties": "Propriétés de l'appareil",
- "deviceRestrictions": "Général",
- "deviceSecurity": "Sécurité système",
- "display": "Affichage",
- "domainJoin": "Jonction de domaine",
- "domains": "Domaines",
- "edgeBrowser": "Ancienne version de Microsoft Edge (version 45 et antérieure)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Mode kiosque Microsoft Edge",
- "editionUpgrade": "Mise à niveau d'édition",
- "education": "Éducation",
- "educationDeviceCerts": "Certificats d'appareil",
- "educationStudentCerts": "Certificats d'étudiant",
- "educationTakeATest": "Passer un test",
- "educationTeacherCerts": "Certificats d'enseignant",
- "emailProfile": "E-mail",
- "enterpriseDataProtection": "Protection des informations Windows",
- "extensibleSingleSignOn": "Extension d’application d’authentification unique",
- "filevault": "FileVault",
- "firewall": "Pare-feu",
- "games": "Jeux",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Monitoring de l’intégrité",
- "homeScreenLayout": "Disposition de l’écran d’accueil",
- "iOSWallpaper": "Papier peint",
- "importedPFX": "Certificat PKCS importé",
- "iosDefenderAtp": "Microsoft Defender pour point de terminaison",
- "iosKiosk": "Kiosque",
- "kernelExtensions": "Extensions de noyau",
- "keyboardAndDictionary": "Clavier et dictionnaire",
- "kiosk": "Kiosque",
- "kioskAndroidEnterprise": "Appareils dédiés",
- "kioskConfiguration": "Kiosque",
- "kioskConfigurationV2": "Kiosque",
- "kioskWebBrowser": "Navigateur web kiosque",
- "lockScreenMessage": "Message d’écran de verrouillage",
- "lockedScreenExperience": "Expérience d'écran verrouillé",
- "logging": "Création de rapports et télémétrie",
- "loginItems": "Éléments de connexion",
- "loginWindow": "Fenêtre de connexion",
- "macDefenderAtp": "Microsoft Defender pour point de terminaison",
- "maintenance": "Maintenance",
- "malware": "Programme malveillant",
- "messaging": "Messagerie",
- "microphonesAndSpeakers": "Microphone et haut-parleurs",
- "networkBoundary": "Limite réseau",
- "networkProxy": "Proxy réseau",
- "notifications": "Notifications de l’application",
- "pKCS": "Certificat PKCS",
- "password": "Mot de passe",
- "personalProfile": "Profil personnel",
- "personalization": "Personnalisation",
- "policyOverride": "Remplacer la stratégie de groupe",
- "ports": "Ports",
- "powerSettings": "Paramètres d'alimentation",
- "printer": "Imprimante",
- "privacy": "Confidentialité",
- "privacyPerApp": "Exceptions de confidentialité par application",
- "privacyPreferences": "Préférences de confidentialité",
- "projection": "Projection",
- "radios": "Signaux radio",
- "sCCMCompliance": "Conformité de Configuration Manager",
- "sCEP": "Certificat SCEP",
- "sCEPProperties": "Certificat SCEP",
- "sMode": "Changement de mode (Windows Insider uniquement)",
- "safari": "Safari",
- "search": "Rechercher",
- "session": "Session",
- "sharedDevice": "iPad partagé",
- "sharedPCAccountManager": "Appareil multi-utilisateur partagé",
- "singleSignOn": "Authentification unique",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Paramètres",
- "start": "Démarrer",
- "systemExtensions": "Extensions système",
- "systemSecurity": "Sécurité système",
- "trustedCert": "Certificat approuvé",
- "uEFIAccess": "Accès UEFI",
- "updates": "Mises à jour",
- "userRights": "Droits de l'utilisateur",
- "usersAndAccounts": "Utilisateurs et comptes",
- "vPN": "VPN de base",
- "vPNApps": "VPN automatique",
- "vPNAppsAndTrafficRules": "Règles de trafic et d'applications",
- "vPNConditionalAccess": "Accès conditionnel",
- "vPNConnectivity": "Connectivité",
- "vPNDNSTriggers": "Paramètres DNS",
- "vPNIKEv2": "Paramètres IKEv2",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Tunneling fractionné",
- "vPNTrustedNetwork": "Détection des réseaux approuvés",
- "wakeSettings": "Paramètres de sortie de veille",
- "webContentFilter": "Filtre de contenu web",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender pour point de terminaison",
- "windowsDefenderATP": "Microsoft Defender pour point de terminaison",
- "windowsHelloForBusiness": "Windows Hello Entreprise",
- "windowsSpotlight": "Windows à la une",
- "wiredNetwork": "Réseau câblé",
- "wireless": "Sans fil",
- "wirelessProjection": "Projection sans fil",
- "workProfile": "Paramètres du profil professionnel",
- "workProfilePassword": "Mot de passe du profil professionnel",
- "xboxServices": "Services Xbox",
- "zebraMx": "Profil MX (Zebra uniquement)",
- "complianceActionsLabel": "Actions en cas de non-conformité"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Description"
- },
- "FeatureDeploymentSettings": {
- "header": "Paramètres de déploiement de fonctionnalités"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Cette fonctionnalité ne peut pas passer un appareil à la version antérieure.",
- "label": "Mise à jour de fonctionnalités à déployer"
- },
- "GradualRolloutEndDate": {
- "label": "Disponibilité du groupe final"
- },
- "GradualRolloutInterval": {
- "label": "Nombre de jours entre les groupes"
- },
- "GradualRolloutStartDate": {
- "label": "Disponibilité du premier groupe"
- },
- "Name": {
- "label": "Nom"
- },
- "OptionalUpdate": {
- "label": "Mise à jour obligatoire ou facultative"
- },
- "RolloutOptions": {
- "label": "Options de déploiement"
- },
- "RolloutSettings": {
- "header": "Quand voulez-vous que la mise à jour soit disponible dans Windows Update?"
- },
- "ScopeSettings": {
- "header": "Configurer des balises d'étendue pour cette stratégie."
- },
- "StartDateOnlyStartDate": {
- "label": "Première date de disponibilité"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Désactivé",
- "enabled": "Activé",
- "infoBalloonContent": "Contrôler s’il faut installer la dernière mise à jour des fonctionnalités Windows 10 sur les appareils qui ne sont pas éligibles pour Windows 11",
- "label": "Lorsqu'un appareil n'est pas éligible pour exécuter Windows 11, installez la dernière mise à jour des fonctionnalités de Windows 10",
- "notApplicable": "N'est pas applicable",
- "summaryLabel": "Installez Windows 10 sur des appareils non éligibles pour exécuter Windows 11"
- },
- "bladeTitle": "Déploiements de mises à jour de fonctionnalités",
- "deploymentSettingsTitle": "Paramètres de déploiement",
- "loadError": "Échec du chargement !",
- "windows11EULA": "En sélectionnant cette mise à jour de fonctionnalité à déployer, vous acceptez que lors de l'application de ce système d'exploitation à un appareil, soit (1) la licence Windows applicable a été achetée via une licence en volume, soit (2) que vous êtes autorisé à lier votre organisation et acceptez sur son au nom des Termes du contrat de licence logiciel Microsoft pertinents qui se trouvent ici {0}."
- },
- "Notifications": {
- "deploymentSaved": "« {0} » a été enregistré.",
- "newFeatureUpdateDeploymentCreated": "Déploiement des mises à jour des fonctionnalités créé."
- },
- "TabName": {
- "deploymentSettings": "Paramètres de déploiement",
- "groupAssignmentSettings": "Affectations",
- "scopeSettings": "Balises d'étendue"
- },
- "gradualRolloutLicenseWarning": "Cette fonctionnalité nécessite une licence spécifique.",
- "gradualRolloutLicenseWarningEdit": "Cette fonctionnalité peut continuer à être utilisée et configurée jusqu’à ce que la stratégie soit enregistrée sans cette fonctionnalité sélectionnée.",
- "licenseLearnMoreText": "En savoir plus sur les conditions préalables et les stratégies de mise à jour qualité.",
- "optionalUpdateWarning": "Facultatif disponible uniquement pour les mises à jour Windows 11",
- "profileNameWarning": "Le nom doit comporter moins de 64 caractères",
- "specificLicensingRequired": "Certaines fonctionnalités sélectionnées nécessitent une licence spécifique."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Autoriser l'utilisation de lettres minuscules dans le code PIN",
- "notAllow": "Ne pas autoriser l'utilisation de lettres minuscules dans le code PIN",
- "requireAtLeastOne": "Exiger l'utilisation d'au moins une lettre minuscule dans le code PIN"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Autoriser l'utilisation de caractères spéciaux dans le code PIN",
- "notAllow": "Ne pas autoriser l'utilisation de caractères spéciaux dans le code PIN",
- "requireAtLeastOne": "Exiger l'utilisation d'au moins un caractère spécial dans le code PIN"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Autoriser l'utilisation de lettres majuscules dans le code PIN",
- "notAllow": "Ne pas autoriser l'utilisation de lettres majuscules dans le code PIN",
- "requireAtLeastOne": "Exiger l'utilisation d'au moins une lettre majuscule dans le code PIN"
- }
+ "InstallContextType": {
+ "device": "Appareil",
+ "deviceContext": "Contexte d'appareil",
+ "user": "Utilisateur",
+ "userContext": "Contexte utilisateur"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "Version de l’application",
- "dependencyName": "Nom de la dépendance",
- "lastModifiedTime": "Heure de la dernière modification",
- "relationship": "Relation",
- "replaced": "Remplacé",
- "searchPlaceholder": "Filtrer par nom d'application",
- "status": "Détails du statut",
- "statusDetails": "État",
- "supersedenceName": "Nom de remplacement"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Dépendance enfant",
- "indirectSupersedence": "Pas directement lié",
- "supersedenceAncestors": "Nombre de remplacement",
- "supersedenceDescendants": "Remplacé"
- },
- "SupersededReplaced": {
- "no": "Non",
- "yes": "Oui"
- },
- "Tabs": {
- "chart": "Graphique",
- "dependency": "Dépendance",
- "label": "Afficher : ",
- "supersedence": "Remplacement",
- "table": "Table"
- },
- "dependencyGraphAriaLabel": "Tableau de dépendance des applications",
- "supersedenceGraphAriaLabel": "Graphique de remplacement d'application"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Sélectionnez un script de détection",
- "scriptFileLabel": "Sélectionnez votre script de détection"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Quand cette option est activée, les appareils doivent être conformes aux règles personnalisées définies dans un fichier JSON en fonction des données personnalisées retournées par un script PowerShell de découverte.",
- "label": "La conformité personnalisée est actuellement proposée en préversion. Lorsqu’elle deviendra généralement disponible, vous pourrez l’ajouter moyennant un coût supplémentaire aux options de licence qui incluent Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Script",
- "placeholder": "Cliquez pour sélectionner",
- "searchboxPlaceholder": "Rechercher par nom de script",
- "title": "Sélectionner un script de détection"
- },
- "SummaryGrid": {
- "ariaLabel": "Résumé des règles de conformité personnalisées"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "Une action de blocage est obligatoire pour toutes les stratégies de conformité.",
+ "graceperiod": "Planification (jours après la non-conformité)",
+ "graceperiodInfo": "Spécifier le nombre de jours de non-conformité après lesquels cette action doit être déclenchée pour l'appareil de l'utilisateur",
+ "subtitle": "Spécifier les paramètres d'action",
+ "title": "Paramètres d'action"
+ },
+ "List": {
+ "gracePeriodDay": "{0} jour après la non-conformité",
+ "gracePeriodDays": "{0} jours après la non-conformité",
+ "gracePeriodHour": "{0} heure après la non-conformité",
+ "gracePeriodHours": "{0} heures après la non-conformité",
+ "gracePeriodMinute": "{0} minute après la non-conformité",
+ "gracePeriodMinutes": "{0} minutes après la non-conformité",
+ "immediately": "Immédiatement",
+ "schedule": "Planification",
+ "scheduleInfoBalloon": "Jours après la non-conformité",
+ "subtitle": "Spécifier la séquence d'actions sur les appareils non conformes",
+ "title": "Actions"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Autres",
+ "additionalRecipients": "Destinataires supplémentaires (via e-mail)",
+ "additionalRecipientsBladeTitle": "Sélectionner des destinataires supplémentaires",
+ "emailAddressPrompt": "Entrer des adresses e-mail (séparées par des virgules)",
+ "invalidEmail": "Adresse e-mail non valide",
+ "messageTemplate": "Modèle de message",
+ "noneSelected": "Aucun utilisateur sélectionné",
+ "notSelected": "Non sélectionné",
+ "numSelected": "{0} sélectionné(s)",
+ "selected": "Sélectionnée"
},
- "UploadFile": {
- "jsonFileLabel": "Charger et valider le fichier JSON avec vos paramètres de conformité personnalisés",
- "noFileSelectedError": "Sélectionnez un fichier JSON",
- "parseFileSelectedError": "Le fichier JSON n’est pas valide"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filtrer",
- "noFilters": "Aucun"
- },
- "Platform": {
- "all": "Tout",
- "android": "Administrateur d'appareil Android",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Commune",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS et Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "Mac OS",
- "unknown": "Inconnu",
- "unsupported": "Non pris en charge",
- "windows": "Windows",
- "windows10": "Windows 10 et ultérieur",
- "windows10CM": "Windows 10 et ultérieur (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographique",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Collaboration",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 et ultérieur",
- "windows8And10": "Windows 8 et 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 et ultérieur",
- "windows10AndWindowsServer": "Windows 10, Windows 11, et Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 et ultérieur (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "PC Windows"
- },
+ "block": "Marquer l'appareil comme non conforme",
+ "lockDevice": "Verrouiller l'appareil (action locale)",
+ "lockDeviceWithPasscode": "Verrouiller l'appareil (action locale)",
+ "noAction": "Aucune action",
+ "noActionRow": "Aucune action, sélectionnez « Ajouter » pour ajouter une action",
+ "pushNotification": "Envoyer des notifications Push à l'utilisateur final",
+ "remoteLock": "Verrouiller à distance l'appareil non conforme",
+ "removeSourceAccessProfile": "Supprimer le profil d'accès source",
+ "retire": "Ajouter un appareil à la liste des mises hors service",
+ "wipe": "Réinitialiser",
+ "emailNotification": "Envoyer un e-mail à l'utilisateur final"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Groupes d'administrateurs",
+ "RoleAssignmentAdminDesc": "Les utilisateurs du groupe d'administrateurs sont les administrateurs affectés à ce rôle.",
+ "rolesMenuTitle": "Rôles Endpoint Manager",
+ "RoleAssignmentScopeDesc": "Les administrateurs de cette attribution de rôle peuvent cibler des stratégies, des applications et des tâches distantes",
+ "RoleAssignmentScope": "Groupes d'étendue"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "Informations sur l'application",
"nameForOfficeSuitApp": "Informations sur la suite d'applications"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "Sur Android, vous pouvez autoriser l'utilisation de l'identification par empreintes digitales au lieu d'un code confidentiel. Les utilisateurs sont invités à fournir leurs empreintes digitales lorsqu'ils accèdent à cette application avec leurs comptes professionnels.",
- "iOS": "Sur les appareils iOS/iPadOS, vous pouvez autoriser l’identification par empreinte digitale au lieu du code confidentiel. Les utilisateurs sont alors invités à fournir leur empreinte digitale quand ils accèdent à cette application avec leur compte professionnel.",
- "mac": "Sur les appareils Mac, vous pouvez autoriser une empreinte digitale à la place d'un code PIN pour s'identifier. Les utilisateurs sont alors invités à fournir leur empreinte digitale quand ils accèdent à cette application avec leur compte professionnel."
- },
- "allowWidgetContentSync": "Choisissez Bloquer pour empêcher les applications gérées par la stratégie d’enregistrer des données dans les widgets d’application. Si vous choisissez Autoriser, l’application gérée par des règles peut enregistrer des données dans les widgets de l’application, si ces fonctions sont prises en charge et activées dans l’application gérée par une stratégie. \r\n\r\n \r\n\r\nLes applications peuvent fournir des fonctionnalités de configuration supplémentaires avec des stratégies de configuration d’application. Pour plus d’informations, consultez la documentation de l’application.",
- "appSharingFromLevel1": "Sélectionnez l'une des options suivantes pour spécifier les applications à partir desquelles cette application peut recevoir des données :",
- "appSharingFromLevel2": "{0} : Autoriser uniquement la réception de données de documents ou comptes d'organisation provenant d'autres applications gérées par stratégie",
- "appSharingFromLevel3": "{0} : Autoriser la réception de données de documents ou comptes d'organisation provenant de n'importe quelle application",
- "appSharingFromLevel4": "{0} : Ne pas autoriser la réception de données de documents ou comptes d'organisation provenant d'une autre application",
- "appSharingFromLevel5": "{0} : Autoriser le transfert de données à partir de n'importe quelle application et traiter toutes les données entrantes sans identité utilisateur comme données de l'organisation.",
- "appSharingToLevel1": "Sélectionnez l'une des options suivantes pour spécifier les applications auxquelles cette application peut envoyer des données :",
- "appSharingToLevel2": "{0} : Autoriser uniquement l'envoi de données d'organisation à d'autres applications gérées par stratégie",
- "appSharingToLevel3": "{0} : Autoriser l'envoi de données d'organisation à n'importe quelle application",
- "appSharingToLevel4": "{0} : Ne pas autoriser l'envoi de données d'organisation à une autre application",
- "appSharingToLevel5": "{0} : Autoriser le transfert uniquement vers d'autres applications gérées par une stratégie et le transfert de fichiers vers d'autres applications gérées par MDM sur des appareils inscrits",
- "appSharingToLevel6": "{0} : Autoriser le transfert uniquement vers d'autres applications gérées par une stratégie et filtrer les boîtes de dialogue Ouvrir dans/Partager pour afficher uniquement les applications gérées par une stratégie",
- "assignmentFilterEdit1": "Si vous appliquez des filtres d’affectation à cette stratégie, la propriété « type Gestion des appareils » s’applique en plus des valeurs spécifiées pour « Cibler les applications sur tous les types d’appareils » et « Types d’appareils » dans la page « Applications ».",
- "assignmentFilterEdit2": "En savoir plus sur l’attribution de stratégies de protection des applications.",
- "conditionalEncryption1": "Sélectionnez {0} pour désactiver le chiffrement de l'application pour le stockage d'applications interne quand le chiffrement de l'appareil est détecté sur un appareil inscrit.",
- "conditionalEncryption2": "Remarque : Intune peut détecter l'inscription des appareils uniquement avec Intune MDM. Le stockage d'applications externe reste chiffré pour que les applications non gérées ne puissent pas accéder aux données.",
- "contactSyncMac": "Si cette option est désactivée, les applications ne peuvent pas enregistrer de contacts dans le carnet d'adresses natif.",
- "contactsSync": "Choisissez Bloquer pour empêcher les applications gérées par la stratégie d’enregistrer des données dans les applications natives de l’appareil (comme les contacts, le calendrier et les widgets) ou pour empêcher l’utilisation de compléments dans les applications gérées par la stratégie. Si vous choisissez Autoriser, l’application gérée par stratégie peut enregistrer des données dans les applications natives ou utiliser des compléments, si ces fonctionnalités sont prises en charge et activées dans l’application gérée par stratégie.
Les applications peuvent fournir une capacité de configuration supplémentaire avec des stratégies de configuration d’application. Pour plus d’informations, consultez la documentation de l’application.",
- "deviceTypeTargetingCreate1": "Le ciblage du type d’appareil a été déplacé vers l’étape Affectations de la création de stratégie.",
- "deviceTypeTargetingEdit1": "Si vous appliquez des filtres d’affectation à cette stratégie, la propriété « type Gestion des appareils » s’applique en plus des valeurs spécifiées pour « Cibler les applications sur tous les types d’appareils » et « Types d’appareils » dans la page « Applications ».",
- "deviceTypeTargetingEdit2": "Pour modifier le ciblage du type de gestion des appareils, réinitialisez « Cibler sur les applications sur tous les types d’appareils » = « Oui ». Créez ensuite un filtre d’affectation MAM avec les valeurs souhaitées pour « Gestion des appareils Type ».",
- "deviceTypeTargetingHasMoved": "En savoir plus sur l’attribution de stratégies de protection des applications",
- "encryptionAndroid1": "Pour les applications associées à une stratégie de gestion des applications mobiles Intune, le chiffrement est fourni par Microsoft. Les données sont chiffrées de manière synchrone pendant les opérations d'E/S selon le paramètre de la stratégie de gestion des applications mobiles. Les applications gérées sur Android utilisent le chiffrement AES-128 en mode CBC qui utilise les bibliothèques de chiffrement de la plateforme. La méthode de chiffrement n'est pas conforme à FIPS 140-2. Le chiffrement SHA-256 est pris en charge sous forme d'instruction explicite à l'aide du paramètre SigAlg et fonctionne uniquement sur des appareils version 4.2 ou ultérieure. Le contenu stocké sur l'appareil est toujours chiffré.",
- "encryptionAndroid2": "Quand vous demandez le chiffrement dans votre stratégie d'application, l'utilisateur final est invité à configurer et utiliser un code confidentiel pour accéder à son appareil. Si aucun code confidentiel n'est configuré pour accéder à l'appareil, les applications ne sont pas lancées et un message s'affiche indiquant à l'utilisateur final : « Votre entreprise exige que vous activiez d'abord un code confidentiel sur l'appareil pour accéder à cette application ».",
- "encryptionMac1": "Pour les applications associées à une stratégie de gestion des applications mobiles Intune, le chiffrement est fourni par Microsoft. Les données sont chiffrées de manière synchrone pendant les opérations d'E/S selon le paramètre de la stratégie de gestion des applications mobiles. Les applications gérées sur Mac utilisent le chiffrement AES-128 en mode CBC qui utilise les bibliothèques de chiffrement de la plateforme. La méthode de chiffrement n'est pas conforme à FIPS 140-2. Le chiffrement SHA-256 est pris en charge sous forme d'instruction explicite à l'aide du paramètre SigAlg et fonctionne uniquement sur des appareils version 4.2 et ultérieure. Le contenu stocké sur l'appareil est toujours chiffré.",
- "faceId1": "Dans certains cas, vous pouvez utiliser l'identification du visage à la place d'un code PIN. Quand les utilisateurs accèdent à cette application à l'aide de leur compte professionnel, ils sont invités à fournir une identification de leur visage.",
- "faceId2": "Sélectionnez Oui pour utiliser l'identification du visage à la place d'un code PIN afin d'accéder aux applications.",
- "managementLevelsAndroid1": "Utilisez cette option pour indiquer si cette stratégie s’applique aux appareils des administrateurs d’appareils Android, aux appareils professionnels Android ou aux appareils non gérés.",
- "managementLevelsAndroid2": "{0} : Les appareils non gérés sont des appareils sur lesquels la gestion Intune MDM n'a pas été détectée. Inclut les fournisseurs MDM tiers.",
- "managementLevelsAndroid3": "{0} : appareils gérés par Intune utilisant l’API d’administration d’appareils Android.",
- "managementLevelsAndroid4": "{0} : appareils gérés par Intune utilisant les profils de travail Android Enterprise ou la gestion complète des appareils Android Enterprise.",
- "managementLevelsIos1": "Utilisez cette option pour spécifier si cette stratégie s'applique aux appareils gérés par MDM ou aux appareils non gérés.",
- "managementLevelsIos2": "{0} : Les appareils non gérés sont des appareils sur lesquels la gestion Intune MDM n'a pas été détectée. Inclut les fournisseurs MDM tiers.",
- "managementLevelsIos3": "{0} : Les appareils gérés sont gérés par Intune MDM.",
- "minAppVersion": "Définissez le numéro de version d'application minimal requis qu'un utilisateur doit avoir pour profiter d'un accès sécurisé à l'application.",
- "minAppVersionWarning": "Définissez le numéro de version d'application minimal conseillé qu'un utilisateur doit avoir pour un accès sécurisé à l'application.",
- "minOsVersion": "Définissez le numéro de version de système d'exploitation minimal requis qu'un utilisateur doit avoir pour profiter d'un accès sécurisé à l'application.",
- "minOsVersionWarning": "Définissez le numéro de version de système d'exploitation minimal conseillé qu'un utilisateur doit avoir pour profiter d'un accès sécurisé à l'application.",
- "minPatchVersion": "Définissez le niveau le plus ancien de correctif de sécurité Android obligatoire qu'un utilisateur doit avoir pour obtenir un accès sécurisé à l'application.",
- "minPatchVersionWarning": "Définissez le niveau le plus ancien de correctif de sécurité Android recommandé qu'un utilisateur doit avoir pour obtenir un accès sécurisé à l'application.",
- "minSdkVersion": "Définissez la version du SDK Stratégie de protection des applications minimale requise qu'un utilisateur doit avoir pour profiter d'un accès sécurisé à l'application.",
- "requireAppPinDefault": "
Sélectionnez Oui pour désactiver le code PIN de l'application quand un verrouillage d'appareil est détecté sur un appareil inscrit.
",
- "targetAllApps1": "Utilisez cette option pour cibler votre stratégie aux applications sur les appareils, peu importe leur état de gestion.",
- "targetAllApps2": "Durant la résolution des conflits de stratégie, ce paramètre est remplacé si une stratégie d'utilisateur cible un état de gestion spécifique.",
- "touchId2": "Sélectionnez {0} pour demander une identification par empreinte digitale au lieu d'un code confidentiel pour accéder à l'application."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Spécifiez le nombre de jours avant la réinitialisation obligatoire du code PIN par l'utilisateur.",
- "previousPinBlockCount": "Ce paramètre spécifie le nombre de codes secrets précédents que Intune va maintenir. Les nouveaux codes secrets doivent être différents de ceux que Intune maintient actuellement."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Cela permet à Windows Search de continuer la recherche dans les données chiffrées.",
- "authoritativeIpRanges": "Activez ce paramètre si vous souhaitez substituer la détection automatique Windows des plages IP.",
- "authoritativeProxyServers": "Activez ce paramètre si vous souhaitez substituer la détection automatique Windows des serveurs proxy.",
- "checkInput": "Vérifier la validité de l'entrée",
- "dataRecoveryCert": "Un certificat de récupération est un certificat spécial du système de fichiers EFS que vous pouvez utiliser pour récupérer des fichiers chiffrés si votre clé de chiffrement est perdue ou endommagée. Vous devez créer le certificat de récupération et le spécifier ici. En savoir plus",
- "enterpriseCloudResources": "
Spécifiez les ressources cloud à traiter comme ressources d'entreprise et à protéger avec une stratégie Windows Information Protection. Vous pouvez spécifier plusieurs ressources en séparant les entrées individuelles avec le caractère « | ».
Si un proxy est configuré dans votre entreprise, vous pouvez spécifier le proxy à travers lequel les ressources cloud que vous avez spécifiées seront routées.
URL[,Proxy]|URL[,Proxy]
Sans proxy : contoso.sharepoint.com|contoso.visualstudio.com Avec proxy : contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Spécifiez les plages d'adresses IPv4 qui constituent votre réseau d'entreprise. Elles sont utilisées conjointement avec les noms de domaine de réseau d'entreprise que vous spécifiez pour définir les limites de votre réseau d'entreprise.
Ce paramètre est obligatoire pour l'activation de Windows Information Protection.
Vous pouvez spécifier plusieurs plages en séparant les entrées individuelles par une virgule.
Par exemple : 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
- "enterpriseIPv6Ranges": "
Spécifiez les plages d'adresses IPv6 qui constituent votre réseau d'entreprise. Elles sont utilisées conjointement avec les noms de domaine de réseau d'entreprise que vous spécifiez pour définir les limites de votre réseau d'entreprise.
Vous pouvez spécifier plusieurs plages en séparant les entrées individuelles par une virgule.
Par exemple : 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
- "enterpriseInternalProxyServers": "
Si un proxy est configuré dans votre entreprise, vous pouvez spécifier le proxy à travers lequel le trafic vers les ressources cloud spécifiées dans les paramètres des ressources cloud d'entreprise doit être routé.
Vous pouvez spécifier plusieurs valeurs en séparant les entrées individuelles par un point-virgule.
Par exemple : contoso.internalproxy1.com;contoso.internalproxy2.com
",
- "enterpriseNetworkDomainNames": "
Spécifiez les noms DNS qui constituent votre réseau d'entreprise. Ils sont utilisés conjointement avec les plages d'adresses IP que vous spécifiez pour définir les limites de votre réseau d'entreprise. Vous pouvez spécifier plusieurs valeurs en séparant les entrées individuelles par une virgule.
Ce paramètre est obligatoire pour l'activation de Windows Information Protection.
Par exemple : corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Spécifiez les noms DNS qui constituent votre réseau d'entreprise. Ils sont utilisés conjointement avec les plages d'adresses IP que vous spécifiez pour définir les limites de votre réseau d'entreprise. Vous pouvez spécifier plusieurs valeurs en les séparant par « | ».
Ce paramètre est obligatoire pour l'activation de Protection des informations Windows.
Par exemple : corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
Si vous avez des proxys accessibles en externe dans votre réseau d'entreprise, spécifiez-les ici. Quand vous spécifiez une adresse de serveur proxy, vous devez également spécifier le port à travers lequel le trafic doit être autorisé et protégé via Windows Information Protection.
Remarque : Cette liste ne doit pas inclure de serveurs de votre liste de serveurs proxy internes de l'entreprise. Vous pouvez spécifier plusieurs valeurs en séparant les entrées individuelles par un point-virgule.
Par exemple : proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "Spécifie la durée maximale (en minutes) autorisée pendant laquelle l'appareil peut rester inactif avant d'être verrouillé par un mot de passe ou un code PIN. Les utilisateurs peuvent choisir toute valeur de délai d'expiration existante qui est inférieure à la durée maximale spécifiée dans l'application Paramètres. Notez que les appareils Lumia 950 et 950XL ont une valeur de délai d'expiration maximale de 5 minutes, quelle que soit la valeur définie par cette stratégie.",
- "maxInactivityTime2": "0 (par défaut) - Aucun délai d'expiration n'est défini. La valeur par défaut « 0 » est interprétée comme « Aucun délai d'expiration n'est défini ».",
- "maxPasswordAttempts1": "Cette stratégie a un comportement différent sur un appareil mobile et un poste de travail.",
- "maxPasswordAttempts2": "Sur un appareil mobile, quand l'utilisateur atteint la valeur définie par cette stratégie, l'appareil est réinitialisé.",
- "maxPasswordAttempts3": "Sur un poste de travail, quand l'utilisateur atteint la valeur définie par cette stratégie, l'appareil n'est pas réinitialisé. Au lieu de cela, le poste de travail est mis en mode de récupération BitLocker, qui rend les données inaccessibles, mais récupérables. Si BitLocker n'est pas activé, la stratégie ne peut pas être appliquée.",
- "maxPasswordAttempts4": "Avant d'atteindre la limite de tentatives infructueuses, l'utilisateur est redirigé vers l'écran de verrouillage et averti que l'ordinateur sera verrouillé à la prochaine tentative infructueuse. Quand l'utilisateur atteint la limite, l'appareil redémarre automatiquement et affiche la page de récupération BitLocker. Cette page invite l'utilisateur à entrer la clé de récupération BitLocker.",
- "maxPasswordAttempts5": "0 (par défaut) - L'appareil n'est jamais réinitialisé après la saisie d'un code PIN ou d'un mot de passe incorrect.",
- "maxPasswordAttempts6": "Si toutes les valeurs de stratégie sont égales à 0, 0 est la valeur la plus sûre. Sinon, la valeur de stratégie Min est la valeur la plus sûre.",
- "mdmDiscoveryUrl": "Spécifiez l'URL du point de terminaison d'inscription MDM à utiliser par les utilisateurs pour s'inscrire au service MDM. Par défaut, cela est spécifié pour Intune.",
- "minimumPinLength1": "Valeur entière qui définit le nombre minimal de caractères obligatoires dans le code PIN. La valeur par défaut est 4. Le plus petit nombre que vous pouvez spécifier pour ce paramètre de stratégie est 4. Le plus grand nombre que vous pouvez spécifier doit être inférieur au nombre défini dans le paramètre de stratégie Longueur maximale du code PIN ou au nombre 127, selon le plus petit des deux.",
- "minimumPinLength2": "Si vous définissez ce paramètre de stratégie, la longueur du code PIN doit être supérieure ou égale à ce nombre. Si vous désactivez ou ne définissez pas ce paramètre de stratégie, la longueur du code PIN doit être supérieure ou égale à 4.",
- "name": "Nom de cette limite réseau",
- "neutralResources": "
Si vous avez des points de terminaison de redirection d'authentification dans votre entreprise, spécifiez-les ici. Les emplacements spécifiés ici sont considérés comme étant personnels ou d'entreprise en fonction du contexte de la connexion avant la redirection.
Vous pouvez spécifier plusieurs valeurs en séparant les entrées individuelles par une virgule.
Par exemple : sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Valeur qui définit Windows Hello Entreprise comme mode de connexion à Windows.",
- "passportForWork2": "La valeur par défaut est true. Si vous définissez cette stratégie sur false, l’utilisateur ne peut pas provisionner Windows Hello Entreprise, sauf sur les téléphones mobiles joints à Microsoft Entra où le provisionnement est requis.",
- "pinExpiration": "Le plus grand nombre que vous pouvez spécifier pour ce paramètre de stratégie est 730. Le plus petit nombre que vous pouvez spécifier pour ce paramètre de stratégie est 0. Si cette stratégie est définie sur 0, le code PIN de l'utilisateur n'expire jamais.",
- "pinHistory1": "Le plus grand nombre que vous pouvez spécifier pour ce paramètre de stratégie est 50. Le plus petit nombre que vous pouvez spécifier pour ce paramètre de stratégie est 0. Si cette stratégie est définie sur 0, la conservation des codes PIN précédents n'est pas nécessaire.",
- "pinHistory2": "Le code PIN actuel de l'utilisateur fait partie de l'ensemble des codes PIN associés au compte de l'utilisateur. L'historique des codes PIN n'est pas conservé après la réinitialisation d'un code PIN.",
- "protectUnderLock": "Protège le contenu de l'application quand l'appareil est dans l'état verrouillé.",
- "protectionModeBlock": "
Bloquer : Bloque le déplacement des données d'entreprise hors des applications protégées.
",
- "protectionModeOff": "
Désactivé : L'utilisateur est autorisé à déplacer les données hors des applications protégées. Ces actions ne sont pas consignées.
",
- "protectionModeOverride": "
Autoriser l'utilisateur à ignorer les avertissements : L'utilisateur est invité à confirmer son action quand il essaie de déplacer des données d'une application protégée vers une application non protégée. S'il choisit d'ignorer cet avertissement, l'action est consignée.
",
- "protectionModeSilent": "
Aucun avertissement : L'utilisateur est autorisé à déplacer les données hors des applications protégées. Ces actions sont consignées.
",
- "required": "Nécessaire",
- "revokeOnMdmHandoff": "Ajouté dans Windows 10, version 1703. Cette stratégie contrôle s'il faut révoquer les clés WIP quand un appareil passe de GAM à MDM. Si elle est définie sur « Désactivé », les clés ne sont pas révoquées et l'utilisateur continue d'avoir accès aux fichiers protégés après la mise à niveau. Ceci est recommandé si le service MDM est configuré avec le même ID d'entreprise WIP que le service GAM.",
- "revokeOnUnenroll": "Cela entraîne la révocation des clés de chiffrement quand l'inscription d'un appareil à cette stratégie est annulée.",
- "rmsTemplateForEdp": "GUID TemplateID à utiliser pour le chiffrement RMS. Le modèle Azure RMS permet à l'administrateur informatique de configurer les détails de chaque utilisateur ayant accès au fichier protégé par RMS, et la durée de cet accès.",
- "showWipIcon": "L'affichage d'une icône en superposition indique à l'utilisateur qu'il se trouve dans un contexte d'entreprise.",
- "useRmsForWip": "Spécifie si le chiffrement Azure RMS est autorisé pour WIP."
- },
- "requireAppPin": "
Sélectionnez Oui pour désactiver le code PIN de l’application quand un verrouillage d’appareil est détecté sur un appareil inscrit.
Remarque : Intune ne peut pas détecter l’inscription d’un appareil avec une solution EMM tierce sur iOS/iPadOS.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "L'installation de l'application peut forcer le redémarrage de l'appareil",
- "basedOnReturnCode": "Déterminer le comportement en fonction des codes de retour",
- "force": "Intune force le redémarrage obligatoire de l'appareil",
- "suppress": "Aucune action spécifique"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Temps d’installation requis (minutes)",
- "maxRunTimeInMinutesToolTip": "Nombre de minutes pendant lesquelles le système attend la fin du programme d’installation. La valeur par défaut est 60 minutes."
- },
- "RunAsAccountOptions": {
- "system": "Système",
- "user": "Utilisateur"
- },
- "availableUninstall": "Autoriser la désinstallation disponible",
- "availableUninstallTooltip": "Sélectionnez « Oui » pour fournir l’option de désinstallation de cette application aux utilisateurs du Portail d'entreprise. Sélectionnez « Non » pour empêcher les utilisateurs de désinstaller l’application du Portail d'entreprise.",
- "bladeTitle": "Programme",
- "deviceRestartBehavior": "Comportement de redémarrage du périphérique",
- "deviceRestartBehaviorTooltip": "Sélectionnez le comportement de redémarrage de l'appareil une fois l'application installée. Sélectionnez « Déterminer le comportement en fonction des codes de retour » pour redémarrer l'appareil en fonction des paramètres de configuration des codes de retour. Sélectionnez « Aucune action spécifique » pour supprimer les redémarrages de l'appareil durant l'installation des applications MSI. Sélectionnez « L'installation de l'application peut forcer le redémarrage de l'appareil » pour permettre l'installation de l'application sans supprimer les redémarrages. Sélectionnez « Intune force le redémarrage obligatoire de l'appareil » pour toujours redémarrer l'appareil après l'installation de l'application.",
- "header": "Spécifiez les commandes pour installer et désinstaller cette application :",
- "installCommand": "Commande d'installation",
- "installCommandMaxLengthErrorMessage": "La commande d’installation ne peut pas dépasser la longueur maximale autorisée de 1024 caractères.",
- "installCommandTooltip": "Ligne de commande d'installation complète pour installer cette application.",
- "runAs32Bit": "Exécuter les commandes d'installation et de désinstallation dans un processus 32 bits sur des clients 64 bits",
- "runAs32BitTooltip": "Sélectionnez 'Oui' pour installer et désinstaller l'application dans un processus 32 bits sur des clients 64 bits. Sélectionnez 'Non' (par défaut) pour installer et désinstaller l'application dans un processus 64 bits sur des clients 64 bits. Les clients 32 bits utilisent toujours un processus 32 bits.",
- "runAsAccount": "Comportement à l'installation",
- "runAsAccountTooltip": "Sélectionnez Système pour installer cette application pour tous les utilisateurs (si elle est prise en charge). Sélectionnez Utilisateur pour l'installer pour l'utilisateur connecté sur l'appareil. Pour les applications MSI à double objectif, tout changement empêche l'exécution des mises à jour et des désinstallations jusqu'à la restauration de la valeur appliquée à l'appareil au moment de l'installation d'origine.",
- "selectorLabel": "Programme",
- "uninstallCommand": "Commande de désinstallation",
- "uninstallCommandTooltip": "Ligne de commande de désinstallation complète pour désinstaller cette application."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Créer",
- "createNewResourceAccountInfo": "
\r\nCréez un compte de ressource pendant l'inscription. Le compte de ressource est ajouté immédiatement aux tableaux de comptes de ressource, mais n'est pas actif tant que l'appareil n'est pas inscrit et que l'abonnement Surface Hub n'est pas vérifié. En savoir plus sur les comptes de ressource
\r\n ",
- "createNewResourceTitle": "Créer un compte de ressource",
- "deviceNameInvalid": "Format du nom d'appareil non valide",
- "deviceNameRequired": "Nom de l'appareil obligatoire",
- "editResourceAccountLabel": "Modifier",
- "selectExistingCommandMenu": "Sélectionner"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "Les noms doivent avoir 15 caractères maximum et peuvent contenir des lettres (a-z, A-Z), des chiffres (0-9) et des traits d'union. Ils ne doivent pas contenir uniquement des chiffres et ne doivent pas contenir d'espace."
- },
- "Header": {
- "addressableUserName": "Nom convivial",
- "azureADDevice": "Appareil Microsoft Entra associé",
- "batch": "Étiquette de groupe",
- "dateAssigned": "Date d'attribution",
- "deviceAccountPwd": "Mot de passe du compte de l’appareil",
- "deviceAccountUpn": "Compte d’appareil",
- "deviceDisplayName": "Nom de l’appareil",
- "deviceFriendlyName": "Nom convivial de l'appareil",
- "deviceName": "Nom de l'appareil",
- "deviceUseType": "Type d'utilisation de l'appareil",
- "enrollmentState": "État de l'inscription",
- "intuneDevice": "Appareil Intune associé",
- "lastContacted": "Dernier contact",
- "make": "Fabricant",
- "model": "Modèle",
- "profile": "Profil affecté",
- "profileStatus": "État du profil",
- "purchaseOrderId": "Bon de commande",
- "resourceAccount": "Compte de ressource",
- "serialNumber": "Numéro de série",
- "userPrincipalName": "Utilisateur"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Un nom convivial est requis",
- "pwdRequired": "Un mot de passe est requis",
- "pwdValidFormat": "Impossible de mettre à jour le mot de passe. La valeur fournie pour le nouveau mot de passe ne répond pas aux exigences de longueur ou de complexité du domaine.",
- "upnRequired": "Un compte d’appareil est requis",
- "upnValidFormat": "Les valeurs peuvent contenir des lettres (a-z, A-Z), des chiffres (0-9) et des traits d’union. Les valeurs ne peuvent pas inclure d’espace vide."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Réunion et présentation",
- "teamCollaboration": "Collaboration en équipe"
- },
- "Devices": {
- "featureDescription": "Windows Autopilot vous permet de personnaliser l'expérience OOBE pour vos utilisateurs.",
- "importErrorStatus": "Certains appareils n'ont pas été importés. Cliquez ici pour plus d'informations.",
- "importPendingStatus": "Importation en cours. Temps écoulé : {0} min. Ce processus peut prendre jusqu'à {1} min."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Jointure hybride Microsoft Entra",
- "activeDirectoryADLabel": "Jointure Microsoft Entra hybride avec Autopilot",
- "azureAD": "Joint à Microsoft Entra",
- "unknownType": "Type inconnu"
- },
- "Filter": {
- "enrollmentState": "État",
- "profile": "État du profil"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "Le nom convivial d'utilisateur ne peut pas être vide."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Créez un modèle de nommage pour ajouter des noms à vos appareils pendant l'inscription.",
- "label": "Appliquer le modèle de nom d'appareil"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "Pour le type de profils de déploiement Autopilot avec jointure à Microsoft Entra hybride, les appareils sont nommés en utilisant les paramètres spécifiés dans la configuration de jointure de domaine."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MyCompany-%RAND:4%",
- "label": "Entrer un nom",
- "noDisallowedChars": "Le nom doit contenir uniquement des caractères alphanumériques, des traits d'union, %SERIAL% ou %RAND:x%",
- "serialLength": "Impossible d'utiliser plus de 7 caractères avec %SERIAL%",
- "validateLessThan15Chars": "Le nom doit avoir 15 caractères maximum",
- "validateNoSpaces": "Les noms d'ordinateur ne peuvent pas contenir d'espace",
- "validateNotAllNumbers": "Le nom doit également contenir des lettres et/ou des traits d'union",
- "validateNotEmpty": "Le nom ne peut pas être vide",
- "validateOnlyOneMacro": "Le nom doit contenir uniquement une %SERIAL% ou une %RAND:x%"
+ "ScopeTypes": {
+ "allDevices": "Tous les appareils",
+ "allUsers": "Tous les utilisateurs",
+ "allUsersAndDevices": "Tous les utilisateurs et tous les appareils",
+ "selectedGroups": "Groupes sélectionnés"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Description",
+ "placeholder": "Entrer une description"
+ },
+ "NameTextBox": {
+ "label": "Nom",
+ "placeholder": "Entrer un nom"
+ },
+ "PublisherTextBox": {
+ "label": "Éditeur",
+ "placeholder": "Entrer un éditeur"
+ },
+ "VersionTextBox": {
+ "label": "Version"
+ },
+ "headerDescription": "Créez un package de script personnalisé à partir des scripts de détection et de correction que vous avez écrits."
},
- "ConfigureComputerNameTemplate": {
- "description": "Créez un nom unique pour vos appareils. Les noms doivent avoir 15 caractères maximum et peuvent contenir des lettres (a-z, A-Z), des chiffres (0-9) et des traits d'union. Ils ne doivent pas contenir uniquement des chiffres. Les noms ne peuvent pas contenir d'espace vide. Utilisez la macro %SERIAL% pour ajouter un numéro de série propre au matériel. Vous pouvez également utiliser la macro %RAND:x% pour ajouter une chaîne aléatoire de chiffres, où x est égal au nombre de chiffres à ajouter."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Autoriser l'exécution d'OOBE sans authentification utilisateur pour inscrire l'appareil et provisionner tous les paramètres et applications du contexte système en appuyant 5 fois sur la touche Windows. Les applications et paramètres du contexte utilisateur seront remis au moment de la connexion de l'utilisateur.",
- "label": "Autoriser le déploiement préconfiguré"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Le flux AutoPilot Microsoft Entra hybride joint se poursuivra même s’il n’établit pas de connectivité au contrôleur de domaine lors de l’installation de OOBE.",
- "label": "Ignorer la vérification de connectivité AD"
- },
- "accountType": "Type de compte d'utilisateur",
- "accountTypeInfo": "Spécifie si les utilisateurs sont des administrateurs ou des utilisateurs standard sur l’appareil. Notez que ce paramètre ne s’applique pas aux comptes d’administrateur général ou d’administrateur de la société. Ces comptes ne peuvent pas être des utilisateurs standard, car ils ont accès à toutes les fonctionnalités d’administration dans Microsoft Entra ID.",
- "configOOBEInfo": "
\r\nConfigurer l'expérience par défaut (out-of-box) pour vos appareils Autopilot\r\n
",
- "configureDevice": "Mode de déploiement",
- "configureDeviceHintForSurfaceHub2": "Autopilot prend uniquement en charge le mode de déploiement automatique pour Surface Hub 2. Ce mode n'associe pas l'utilisateur à l'appareil inscrit et n'a donc pas besoin des informations d'identification de l'utilisateur.",
- "configureDeviceHintForWindowsPC": "
\r\n Le mode de déploiement contrôle si un utilisateur doit fournir des informations d'identification pour provisionner l'appareil.\r\n
\r\n
\r\n
\r\n Géré par l'utilisateur : L'appareil est associé à l'utilisateur qui effectue l'inscription et doit fournir ses informations d'identification pour provisionner l'appareil\r\n
\r\n
\r\n Auto-déploiement (préversion) : L'appareil n'est pas associé à l'utilisateur qui effectue l'inscription et les informations d'identification de l'utilisateur ne sont pas nécessaires pour provisionner l'appareil\r\n
\r\n
",
- "createSurfaceHub2Info": "Configurez les paramètres d'inscription Autopilot pour vos appareils Surface Hub 2. Par défaut, Autopilot permet d'ignorer l'authentification utilisateur pendant l'expérience OOBE. Découvrez-en plus sur Windows Autopilot pour Surface Hub 2.",
- "createWindowsPCInfo": "\r\n
\r\nLes options suivantes sont automatiquement activées pour les appareils Autopilot en mode de déploiement automatique :\r\n
\r\n
\r\n
\r\n Ignorer la sélection d'utilisation professionnelle ou personnelle\r\n
\r\n
\r\n Ignorer l'inscription OEM et la configuration de OneDrive\r\n
\r\n
\r\n Ignorer l'authentification de l'utilisateur dans OOBE\r\n
\r\n
",
- "endUserDevice": "Géré par l'utilisateur",
- "hideEscapeLink": "Masquer les options de changement de compte",
- "hideEscapeLinkInfo": "Les options permettant de changer de compte et de recommencer avec un autre compte apparaissent, respectivement, pendant l’installation initiale de l’appareil dans la page de connexion de l’entreprise et dans la page des erreurs de domaine. Pour masquer ces options, vous devez configurer la personnalisation de l’entreprise dans Microsoft Entra ID (nécessite Windows 10, 1809 ou version ultérieure ou Windows 11).",
- "info": "Les paramètres du profil AutoPilot définissent l'expérience OOBE (Out-of-Box Experience) que les utilisateurs voient au premier démarrage de Windows. ",
- "language": "Langue (région)",
- "languageInfo": "Spécifiez la langue et la région à utiliser.",
- "licenseAgreement": "Termes du contrat de licence logiciel Microsoft",
- "licenseAgreementInfo": "Indiquez si le CLUF est présenté aux utilisateurs.",
- "plugAndForgetDevice": "Déploiement automatique",
- "privacySettingWarning": "La valeur par défaut pour la collecte des données de diagnostic a changé pour les appareils exécutant Windows 10, version 1903 ou ultérieure ou Windows 11. ",
- "privacySettings": "Paramètres de confidentialité",
- "privacySettingsInfo": "Indiquez si les paramètres de confidentialité sont présentés aux utilisateurs.",
- "showCortanaConfigurationPage": "Configuration de Cortana",
- "showCortanaConfigurationPageInfo": "L'option Afficher active l'introduction de la configuration de Cortana au démarrage.",
- "skipEULAWarning": "Informations importantes sur le masquage des termes du contrat de licence",
- "skipKeyboardSelection": "Configurer automatiquement le clavier",
- "skipKeyboardSelectionInfo": "Si la valeur est true, ignorez la page de sélection du clavier quand la langue est définie.",
- "subtitle": "Profils AutoPilot",
- "title": "OOBE (Out-Of-Box Experience)",
- "useOSDefaultLanguage": "Système d'exploitation par défaut",
- "userSelect": "Sélection de l’utilisateur"
- },
- "Sync": {
- "lastRequestedLabel": "Dernière demande de synchronisation",
- "lastSuccessfulLabel": "Dernière synchronisation effectuée",
- "syncInProgress": "La synchronisation est en cours. Revenez un peu plus tard.",
- "syncInitiated": "Synchronisation des paramètres AutoPilot lancée.",
- "syncSettingsTitle": "Synchroniser les paramètres AutoPilot"
- },
- "Title": {
- "devices": "Appareils Windows AutoPilot"
- },
- "Tooltips": {
- "addressableUserName": "Nom de bienvenue affiché lors de l'installation de l'appareil.",
- "azureADDevice": "Accédez aux détails de l'appareil associé. N/A signifie qu'aucun appareil n'est associé.",
- "batch": "Attribut de chaîne qui permet d’identifier un groupe d’appareils. Le champ de balise de groupe de Intune est associé à l’attribut OrderID sur les appareils Microsoft Entra.",
- "dateAssigned": "Horodatage de l'affectation du profil à l'appareil.",
- "deviceAccountPwd": "Mot de passe du compte d’appareil pour les appareils Surface Hub. En cas d’entrée, renseignez également le compte d’appareil et le nom convivial.",
- "deviceAccountUpn": "Adresse e-mail du compte d’appareil pour les appareils Surface Hub. En cas d’entrée, renseignez également le mot de passe du compte d’appareil et le nom convivial.",
- "deviceDisplayName": "Configurez un nom unique pour un appareil. Ce nom sera ignoré dans les déploiements avec jointure Microsoft Entra hybride. Le nom de l’appareil est toujours issu du profil de jonction de domaine pour les appareils Microsoft Entra hybride.",
- "deviceFriendlyName": "Nom convivial de l’appareil pour les appareils Surface Hub. En cas d’entrée, renseignez également le compte d’appareil et le mot de passe du compte d’appareil.",
- "deviceName": "Nom affiché quand un utilisateur tente de découvrir l'appareil et de s'y connecter.",
- "deviceUseType": " L'appareil est configuré en fonction de votre choix. Vous pouvez toujours changer la configuration par la suite dans les paramètres.\r\n
\r\n
Pour les réunions et les présentations, Windows Hello n'est pas activé et les données sont supprimées après chaque session.\r\n
\r\n
Pour la collaboration en équipe, Windows Hello est activé et les profils sont enregistrés pour une connexion rapide
\r\n
",
- "enrollmentState": "Spécifie si l'appareil est inscrit.",
- "intuneDevice": "Accédez aux détails de l'appareil associé. N/A signifie qu'aucun appareil n'est associé.",
- "lastContacted": "Horodatage de la dernière fois où l'appareil a été contacté.",
- "make": "Fabricant de l'appareil sélectionné.",
- "model": "Modèle de l'appareil sélectionné",
- "profile": "Nom du profil affecté à l'appareil.",
- "profileStatus": "Spécifie si un profil est affecté à l'appareil.",
- "purchaseOrderId": "ID de bon de commande",
- "resourceAccount": "Identité de l'appareil ou nom d'utilisateur principal (UPN).",
- "serialNumber": "Numéro de série de l'appareil sélectionné.",
- "userPrincipalName": "Utilisateur pour prérenseigner l'authentification pendant l'installation de l'appareil."
- },
- "allDevices": "Tous les appareils",
- "allDevicesAlreadyAssignedError": "Un profil Autopilot est déjà affecté à tous les appareils.",
- "assignFailedDescription": "Échec de mise à jour des affectations de {0}.",
- "assignFailedTitle": "Échec de mise à jour des affectations de profil AutoPilot.",
- "assignSuccessDescription": "Affectations mises à jour pour {0}.",
- "assignSuccessTitle": "Affectations de profil AutoPilot mises à jour.",
- "assignSufaceHub2ProfileNextStep": "Étapes suivantes pour ce déploiement",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Affecter ce profil à au moins un groupe d'appareils",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Affecter un compte de ressource à chaque appareil Surface Hub sur lequel vous déployez ce profil",
- "assignedDevicesCount": "Appareils attribués",
- "assignedDevicesResourceAccountDescription": "
Pour déployer ce profil sur un appareil, vous devez attribuer un compte de ressource à l'appareil. Sélectionnez un appareil à la fois pour lui attribuer un compte de ressource existant ou pour en créer un. En savoir plus sur les comptes de ressource
",
- "assignedDevicesResourceAccountStatusBarMessage": "Ce tableau liste uniquement les appareils Surface Hub 2 auxquels ce profil a été attribué.",
- "assigningDescription": "Mise à jour des affectations de {0}.",
- "assigningTitle": "Mise à jour des affectations de profil AutoPilot.",
- "autoremediationContext": "Nous avons détecté un changement matériel sur cet appareil. Nous essayons d’enregistrer automatiquement le nouveau matériel. Vous n'avez rien à faire maintenant ; le statut sera mis à jour lors de la prochaine vérification avec le résultat. En savoir plus sur la réinitialisation du profil.",
- "autoremediationTitle": "Un correctif est en attente pour l’appareil {0}.",
- "cannotDeleteMessage": "Ce profil est affecté à des groupes. Vous devez annuler l'affectation de tous les groupes de ce profil pour pouvoir le supprimer.",
- "cannotDeleteTitle": "Impossible de supprimer {0}",
- "createdDateTime": "Création",
- "deleteMessage": "Si vous supprimez ce profil AutoPilot, tous les appareils affectés à ce profil apparaîtront avec l'état « Non affecté ».",
- "deleteMessageWithPolicySet": "{0} est incluse dans un ou plusieurs ensembles de stratégies. Si vous supprimez {0}, vous ne serez plus en mesure de l'affecter par l'intermédiaire de ces ensembles de stratégies.",
- "deleteTitle": "Voulez-vous vraiment supprimer ce profil ?",
- "description": "Description",
- "deviceType": "Type de périphérique",
- "deviceUse": "Utilisation de l'appareil",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot prend en charge uniquement une jonction à Microsoft Entra pour les appareils Surface Hub 2. Spécifiez le type de jointure Active Directory (AD) pour les appareils de votre organisation.\r\n
\r\n
\r\n
\r\n Joint à Microsoft Entra : Cloud uniquement sans instance locale de Windows Server Active Directory.\r\n
\r\n Spécifiez le mode de jointure des appareils à Active Directory (AD) dans votre organisation :\r\n
\r\n
\r\n
\r\n Joint à Microsoft Entra : cloud uniquement sans Windows Server Active Directory local\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Une erreur s'est produite pendant la récupération du nombre d'appareils affectés.",
- "getAssignmentsError": "Une erreur s'est produite pendant la récupération des affectations de profil AutoPilot.",
- "harvestDeviceId": "Convertir tous les appareils ciblés en Autopilot",
- "harvestDeviceIdDescription": "Par défaut, ce profil est applicable seulement aux appareils Autopilot synchronisés à partir du service Autopilot.",
- "harvestDeviceIdInfo": "\r\n Sélectionnez Oui pour inscrire tous les appareils ciblés à Autopilot s'ils ne le sont pas déjà. La prochaine fois que les appareils inscrits utilisent l'expérience OOBE, ils sont dirigés vers le scénario Autopilot affecté.\r\n \r\n Notez que certains scénarios Autopilot nécessitent des builds minimales spécifiques. Vérifiez que votre appareil dispose de la build minimale nécessaire pour utiliser le scénario.\r\n \r\n La suppression de ce profil ne supprime pas les appareils concernés dans Autopilot. Pour supprimer un appareil dans Autopilot, utilisez la vue Appareils Windows Autopilot.\r\n ",
- "harvestDeviceIdWarning": "Pour rétablir des appareils après la conversion, vous devez les supprimer de la liste des appareils Autopilot.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Les profils Windows AutoPilot Deployment vous permettent de personnaliser l'expérience OOBE (Out-of-Box Experience) sur vos appareils.",
- "invalidProfileNameMessage": "Le caractère « {0} » n'est pas autorisé",
- "joinTypeLabel": "Rejoindre Microsoft Entra ID en tant que",
- "lastModifiedDateTime": "Dernière modification le :",
- "manualRemediationContext": "Nous avons détecté une modification matérielle sur cet appareil. Il ne recevra pas automatiquement un profil Autopilot lorsqu’il sera réinitialisé, sauf si vous réinscrivez l’appareil. En savoir plus sur la réinitialisation du profil.",
- "manualRemediationTitle": "L’appareil {0} requiert votre attention.",
- "name": "Nom",
- "noAutopilotProfile": "Aucun profil AutoPilot",
- "notEnoughPermissionAssignedError": "Vous n'avez pas les autorisations suffisantes pour affecter ce profil à un ou plusieurs groupes sélectionnés. Contactez votre administrateur.",
- "profile": "profil",
- "resourceAccountStatusBarMessage": "Un compte de ressource est obligatoire pour chaque appareil Surface Hub 2 sur lequel ce profil est déployé. Cliquez pour en savoir plus.",
- "selectServices": "Sélectionner le service d'annuaire que joindront les appareils",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Mode de déploiement",
- "windowsPCCommandMenu": "PC Windows",
- "directoryServiceLabel": "Rejoindre Microsoft Entra ID en tant que"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Groupes d'administrateurs",
- "RoleAssignmentAdminDesc": "Les utilisateurs du groupe d'administrateurs sont les administrateurs affectés à ce rôle.",
- "rolesMenuTitle": "Rôles Endpoint Manager",
- "RoleAssignmentScopeDesc": "Les administrateurs de cette attribution de rôle peuvent cibler des stratégies, des applications et des tâches distantes",
- "RoleAssignmentScope": "Groupes d'étendue"
- },
+ "ScopeTags": {
+ "headerDescription": "Sélectionnez un ou plusieurs groupes pour attribuer le package de script."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Script de détection",
+ "placeholder": "Texte du script d’entrée",
+ "requiredValidationMessage": "Entrez le script de détection"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Appliquer la vérification de la signature du script"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Exécuter ce script en utilisant les informations d’identification de l’utilisateur connecté"
+ },
+ "RemediationScript": {
+ "infoBox": "Ce script s’exécute en mode détection seule, car il n’existe pas de script de correction."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Script de correction",
+ "placeholder": "Texte du script d’entrée"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Exécuter le script dans PowerShell 64 bits"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Script non valide. Un ou plusieurs caractères utilisés dans le script ne sont pas valides."
+ },
+ "headerDescription": "Créez un package de script personnalisé à partir des scripts que vous avez écrits. Par défaut, les scripts s’exécuteront tous les jours sur les appareils concernés.",
+ "infoBox": "Ce script est en lecture seule. Certains paramètres de ce script sont peut-être désactivés."
+ },
+ "title": "Créer un script personnalisé",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Intervalle",
+ "time": "Date et heure"
+ },
+ "Interval": {
+ "day": "Se répète chaque jour",
+ "days": "Se répète tous les {0} jours",
+ "hour": "Se répète toutes les heures",
+ "hours": "Se répète toutes les {0} heures",
+ "month": "Se répète tous les mois",
+ "months": "Se répète tous les {0} mois",
+ "week": "Se répète chaque semaine",
+ "weeks": "Se répète toutes les {0} semaines"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) le {1}",
+ "withDate": "{0} le {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Modifier - {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Échouer uniquement les applications de blocage sélectionnées dans la phase de technicien",
- "apps": "applications",
- "appsListName": "Liste des applications",
- "blockingApps": "Blocage des applications",
- "managedApps": "Applications gérées",
- "noApps": "Aucune application",
- "noAppsError": "Erreur de récupération des applications",
- "selectApps": "Sélectionner les applications",
- "selectedAppsCount": "{0} applications sélectionnées (100 max.)",
- "useSelectedAppsAll": "Tout",
- "useSelectedAppsSelected": "Sélectionné",
- "useSelectedAppsToggleLabel": "Bloquer l’utilisation de l’appareil jusqu’à ce que les applications requises soient installées si elles sont attribuées à l’utilisateur/à l’appareil"
- },
- "Header": {
- "application": "Application",
- "publisher": "Éditeur",
- "version": "Version"
- },
- "SearchBox": {
- "ariaLabel": "Rechercher des applications",
- "placeHolder": "Rechercher par nom ou éditeur"
- },
- "allowToUseToggle": "Autoriser les utilisateurs à se servir de l'appareil en cas d'erreur d'installation",
- "blockToggle": "Bloquer l'utilisation de l'appareil tant que les profils et les applications ne sont pas tous installés",
- "blockToolTip": "Si vous ajoutez Microsoft Word à cette liste, par exemple, les utilisateurs et appareils ciblés ne pourront pas quitter la page d'état d'inscription tant que Word n'est pas correctement installé.",
- "collectLogToggle": "Activer la collecte de journaux et la page de diagnostic pour les utilisateurs finaux",
- "create": "Créer le profil",
- "customMessageTextBox": "Message d'erreur",
- "customMessageToggle": "Afficher un message personnalisé lorsque la limite de temps ou l'erreur se produit",
- "enableForAutopilotOnlyToggle": "Afficher uniquement la page sur les appareils approvisionnés par OOBE (out-of-box experience)",
- "installQualityUpdatesToggle": "Installer les mises à jour de qualité Windows (pourrait redémarrer l'appareil) (aperçu)",
- "progressToggle": "Afficher la progression de la configuration des applications et des profils",
- "resetToggle": "Autoriser les utilisateurs à réinitialiser l'appareil en cas d'erreur d'installation",
- "timeout": "Afficher une erreur quand la durée de l'installation est supérieure au nombre de minutes spécifié"
- },
+ "OfficeUpdateChannel": {
+ "current": "Canal actuel",
+ "deferred": "Canal Entreprise semi-annuel",
+ "firstReleaseCurrent": "Canal actuel (préversion)",
+ "firstReleaseDeferred": "Canal Entreprise biannuel (préversion)",
+ "monthlyEnterprise": "Canal d’entreprise mensuel",
+ "placeHolder": "Sélectionner un élément"
+ },
"TableHeaders": {
"activity": "Activité",
"activityName": "Nom de l'activité",
@@ -1293,30 +417,175 @@
"excludedGroups": "Groupes exclus",
"licenseType": "Type de licence"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Configurez les critères de code PIN et d'informations d'identification que les utilisateurs doivent respecter pour pouvoir accéder aux applications dans un contexte de travail."
- },
- "DataProtection": {
- "infoText": "Ce groupe comprend les contrôles de protection contre la perte de données (DLP), par exemple, les restrictions des opérations couper, copier, coller et enregistrer sous. Ces paramètres déterminent comment les utilisateurs interagissent avec les données dans l'application."
- },
- "DeviceTypes": {
- "selectOne": "Sélectionnez au moins un type de périphérique."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Cibler les applications sur tous les types d'appareil"
- },
- "infoText": "Choisissez la façon dont vous souhaitez appliquer cette stratégie aux applications sur différents appareils. Ensuite, ajoutez au moins une application.",
- "selectOne": "Sélectionnez au moins une application pour créer une stratégie."
- }
- },
- "AssignmentAction": {
- "exclude": "Exclu",
- "include": "Inclus",
- "includeAllDevicesVirtualGroup": "Inclus",
- "includeAllUsersVirtualGroup": "Inclus"
- },
+ "Inputs": {
+ "accountDomain": "Domaine du compte",
+ "accountDomainHint": "Exemple : contosodomain",
+ "accountDomainInfoBalloon": "Spécifiez le domaine du compte de l'utilisateur.",
+ "accountTypeInfoBalloon": "Spécifiez le type de compte en cours de configuration selon le modèle d'authentification",
+ "allowContactSetting": "Autoriser l'utilisateur à changer le paramètre des contacts",
+ "allowContactSyncInfoBalloon": "Indiquez si l'utilisateur est autorisé à changer le paramètre de synchronisation des contacts",
+ "allowUserChange": "Autoriser l'utilisateur à changer le paramètre",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Entrez un nom de package comme com.microsoft.word",
+ "androidUrlValidation": "Entrez une URL valide semblable à celle-ci : https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "Contexte d'installation d'application",
+ "appUrlLabel": "URL de l'App Store",
+ "appleUrlValidation": "Entrez une URL valide semblable à celle-ci : https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Type d'appareil applicable",
+ "assignmentActionLabel": "Mode",
+ "authenticationMethodInfoBalloon": "Indiquez la méthode d'authentification pour l'utilisateur",
+ "authenticationMetod": "Méthode d'authentification",
+ "authenticationType": "Type d'authentification",
+ "authenticationTypeInfoBalloon": "Indiquer le type d'authentification pour l'utilisateur",
+ "availableLicenseCount": "Licences disponibles",
+ "basicAuth": "Authentification de base",
+ "biometricsInfoBalloon": "Des données biométriques, comme TouchID ou FaceID, peuvent être demandées aux utilisateurs pour leur permettre d'accéder à l'application sur leur appareil. Le cas échéant, les données biométriques sont utilisées en plus de la méthode d'authentification sélectionnée dans ce profil. N'activez pas ce paramètre si des stratégies Intune App Protection sont déployées, car la stratégie de protection des applications inclut des conditions d'accès préalables à l'accès aux données managées. L'activation des deux entraînerait l'affichage de plusieurs invites d'accès à Outlook Mobile. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
+ "bookNameLabel": "Nom du livre",
+ "bundleDescriptionHint": "Entrez une description des applications incluses.",
+ "calendar": "Calendrier",
+ "categoryLabel": "Catégorie",
+ "categoryNameLabel": "Nom par défaut",
+ "certProfileType": "Type de profil de certificat",
+ "certificate": "Certificat",
+ "certificates": "Certificats",
+ "commandLineLabel": "Arguments de ligne de commande",
+ "commandLineSizeHint": "Le texte des arguments de ligne de commande ne doit pas dépasser 1 024 caractères",
+ "configurationSettingsFormatLabel": "Format des paramètres de configuration",
+ "configurationSettingsLabel": "Format des paramètres",
+ "contactSync": "Enregistrer les contacts",
+ "contactSyncInfoBalloon": "L'enregistrement de contacts dans le carnet d'adresses natif de l'appareil mobile permet de lier les nouveaux appels et SMS aux contacts Outlook existants de l'utilisateur. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
+ "contacts": "Contacts ",
+ "createdDateTime": "Création",
+ "defaultCategoryHint": "Impossible de changer les catégories par défaut",
+ "deploySMimeCertsFromIntune": "Déployer des certificats S/MIME à partir d'Intune",
+ "descriptionGenericLabel": "Description",
+ "descriptionHint": "Entrez une description...",
+ "descriptionLabel": "Description",
+ "descriptionSizeHint": "La longueur de la description ne doit pas dépasser 10 000 caractères",
+ "developerLabel": "Développeur",
+ "developerSizeHint": "La longueur maximale du nom de développeur est 256 caractères.",
+ "disable": "Désactiver",
+ "disabled": "Désactivé",
+ "displayNameLabel": "Nom",
+ "displayVersionHint": "Entrer la version de l’application",
+ "displayVersionLabel": "Version de l’application",
+ "displayVersionLengthCheck": "La longueur de la version d’affichage doit être de 130 caractères maximum",
+ "eBookCategoryNameLabel": "Nom par défaut",
+ "emailAccount": "Nom du compte e-mail",
+ "emailAccountHint": "par exemple, e-mail de l'entreprise",
+ "emailAccountInfoBalloon": "Spécifiez le nom d'affichage du compte e-mail tel qu'il apparaîtra aux utilisateurs sur leurs appareils",
+ "emailAddressAttribute": "Attribut d’adresse e-mail de Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Spécifier l'adresse e-mail à utiliser pour l'envoi et la réception d'e-mails",
+ "emailServer": "Serveur e-mail",
+ "emailServerHint": "par ex., mail.contoso.com",
+ "emailServerInfoBalloon": "Spécifier le nom d'hôte de votre serveur Exchange",
+ "enable": "Activer",
+ "enableSMime": "Activer S/MIME",
+ "enabled": "Activé",
+ "encryptAllEmails": "Chiffrer tous les e-mails",
+ "encryptionCertificates": "Certificats de chiffrement",
+ "endUserNotifications": "Notifications de l'utilisateur final",
+ "enrollmentTypeLabel": "Type d'inscription de l'appareil",
+ "externalRecipients": "Info courrier Destinataires externes",
+ "externalRecipientsInfoBalloon": "L’info courrier Destinataires externes s’affiche si l’expéditeur ajoute un destinataire externe ou un groupe de distribution contenant des destinataires externes. Cette info courrier informe les expéditeurs que le message qu’ils composent va sortir de l’organisation, les incitant ainsi à adapter la formulation, le ton et le contenu de leur message. Disponible uniquement pour les comptes Exchange Online et les comptes locaux tirant parti de l’authentification moderne hybride. S’il n’est pas configuré, le paramètre d’application par défaut a la valeur Activé.",
+ "focusedInbox": "Boîte de réception Prioritaire",
+ "focusedInboxInfoBalloon": "La boîte de réception Prioritaire sépare votre boîte de réception en deux onglets : Prioritaire et Autres. Les e-mails les plus importants apparaissent sous l'onglet Prioritaire, tandis que les autres restent facilement accessibles, mais en retrait, sous l'onglet Autres. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Activé.",
+ "fullScreenEnabledLabel": "Plein écran",
+ "gmailNineAmountOfEmail": "Nombre d'e-mails à synchroniser",
+ "gmailNineAuthenticationMethodInfoBalloon": "Sélectionnez le mode d'authentification des utilisateurs sur le serveur de messagerie. Utilisez des certificats pour fournir aux utilisateurs finaux l'expérience la plus sécurisée et la plus fluide. L'authentification basée sur les certificats n'est pas encore disponible, car les profils de certificat SCEP et PKCS des appareils de propriétaires ne sont pas disponibles. ",
+ "gmailNineCertificateUPNInfoBalloon": "Le certificat doit inclure le nom d'utilisateur principal (UPN) comme autre nom de l'objet.",
+ "gmailNineEmailAddressInfoBalloon": "L’attribut que Intune obtient de Microsoft Entra ID pour générer dynamiquement l’adresse e-mail qui sera utilisée par le profil, par exemple MyName@contoso.com (UPN). En savoir plus sur les attributs Microsoft Entra pour les profils de messagerie.",
+ "gmailNineEmailServerInfoBalloon": "Emplacement Exchange (URL) du serveur de messagerie auquel l'application spécifiée se connecte pour récupérer les e-mails.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Contrôle la quantité d'e-mails synchronisés par le client.",
+ "gmailNineSSLInfoBalloon": "Active SSL pour sécuriser toutes les communications avec le serveur de messagerie.",
+ "gmailNineUsernameInfoBalloon": "L’attribut que Intune obtient de Microsoft Entra ID pour générer dynamiquement le nom d'utilisateur qui sera utilisé par le profil, par exemple MyName@contoso.com (UPN) ou MyName (nom d'utilisateur). En savoir plus sur les attributs Microsoft Entra pour les profils de messagerie.",
+ "ignoreManifestScope": "Ignorer l’étendue du manifeste",
+ "ignoreVersionDetection": "Ignorer la version de l'application",
+ "informationUrlLabel": "URL d'informations",
+ "informationUrlSizeHint": "La longueur maximale de l’URL d’informations est de 1 024 caractères",
+ "installAsManaged": "Installer comme étant managée",
+ "installationSourceLabel": "Type d'application",
+ "installerTypeInfoBalloon": "Type de programme d’installation du package d’application.",
+ "installerTypeLabel": "Type de programme d'installation",
+ "isFeatured": "Afficher ceci en tant qu’application à la une dans le Portail d’entreprise",
+ "isMAMEnabledToggleLabel": "Oui",
+ "lastModifiedDateTime": "Heure de la dernière mise à jour",
+ "ldapUrl": "URL LDAP",
+ "licensingType": "Prend en charge l'attribution d'un contexte d'appareil",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Système d'exploitation minimal",
+ "modernAuth": "Authentification moderne",
+ "nameHint": "Entrer un nom",
+ "nameLabel": "Nom",
+ "nameSizeHint": "La longueur maximale du nom est 512 caractères.",
+ "notConfigured": "Non configuré",
+ "notesLabel": "Remarques",
+ "notesSizeHint": "La longueur maximale du texte des commentaires est 1 024 caractères.",
+ "notificationType": "Type de notification",
+ "oneDay": "Une journée",
+ "oneMonth": "Un mois",
+ "oneWeek": "Une semaine",
+ "outlookSMimeSettings": "Paramètres S/MIME Outlook",
+ "ownerLabel": "Propriétaire",
+ "ownerSizeHint": "La longueur maximale du nom de propriétaire est 256 caractères.",
+ "packageIdLabel": "Identificateur de package",
+ "packageNameLabel": "Nom du package",
+ "pivCredentialNotConfigured": "Vous n'avez pas sélectionné d'émetteur d'informations d'identification dérivées pour votre locataire. Vous devez en configurer un pour pouvoir appliquer cette stratégie aux appareils.",
+ "platformLabel": "Plateforme",
+ "policyDescriptionLabel": "Description",
+ "policyNameLabel": "Nom",
+ "preComposedIconEnabled": "Précomposé",
+ "primarySMTPAddress": "Adresse SMTP principale",
+ "privacyUrlLabel": "URL de la déclaration de confidentialité",
+ "publisherHint": "Entrez un nom d'éditeur",
+ "publisherLabel": "Éditeur",
+ "publisherSizeHint": "La longueur du nom d'éditeur doit être comprise entre 2 et 1 024 caractères (inclus)",
+ "require": "Exiger",
+ "requireBiometrics": "Exiger la biométrie pour accéder à l'application",
+ "sAMAccountName": "SamAccountName",
+ "scopeTagsRequired": "Au moins une balise d'étendue est obligatoire",
+ "searchAppLabel": "Sélectionner une application",
+ "searchAppLinkText": "Rechercher dans l'App Store",
+ "searchWinGetPublicRepositoryLinkText": "Rechercher le référentiel de communauté du gestionnaire de package Windows",
+ "searchWinGetStoreRepositoryLinkText": "Rechercher l’application Microsoft Store (nouvelle)",
+ "selectAAD": "Sélectionner un attribut Microsoft Entra",
+ "selectAppFileLabel": "Sélectionner un fichier",
+ "selectAppFileLinkText": "Sélectionner un fichier de package d'application",
+ "selectAppFileToUpdateLabel": "Sélectionnez le fichier à mettre à jour",
+ "selectAuthMethod": "Sélectionner une méthode d'authentification",
+ "selectAuthType": "Sélectionner un type d'authentification",
+ "selectCatalogAppLabel": "Sélectionner une application",
+ "selectCatalogAppLinkText": "Rechercher dans le catalogue d’applications d’entreprise",
+ "selectCertificate": "Sélectionner un certificat",
+ "signAllEmails": "Signer tous les e-mails",
+ "signingCertificates": "Certificats de signature",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Description de la suite",
+ "suiteNameLabel": "Nom de la suite",
+ "targetApplicationBundleIdentifier": "Identificateur de bundle d’application cible",
+ "targetedPlatformsLabel": "Plateforme ciblée",
+ "tasks": "Tâches",
+ "threeDays": "Trois jours",
+ "totalLicenseCount": "Nombre total de licences",
+ "twoWeeks": "Deux semaines",
+ "unifiedAssignmentsLabel": "Affecter à :",
+ "unlimited": "Illimité",
+ "urlHint": "Entrez une URL valide",
+ "useManagedBrowserHint": "Android et iOS uniquement. En savoir plus",
+ "useManagedBrowserLabel": "Exiger l'ouverture de ce lien dans Managed Browser",
+ "userPrinicipalName": "Nom d'utilisateur principal",
+ "username": "Nom d'utilisateur",
+ "usernameAttribute": "Attribut de nom d’utilisateur de Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Spécifier le nom d'utilisateur principal pour le profil e-mail utilisé pour authentifier le compte",
+ "usernamePassword": "Nom d'utilisateur et mot de passe",
+ "webAppUrlHint": "Entrer une URL valide commençant par http:// ou https://",
+ "webAppUrlLabel": "URL de l'application",
+ "webAppUrlSizeHint": "La longueur maximale de l’URL de l’application est de 1024 caractères",
+ "windowsUrlValidation": "Entrez une URL valide semblable à celle-ci : https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "Données XML entrées",
+ "xmlFormatInvalid": "Le format de la stratégie XML n'est pas valide.",
+ "xmlTooLarge": "La taille d'entrée doit être inférieure à 1 Mo."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Les utilisateurs concernés sont limités par la page d’autorité de cogestion suivante avec la priorité la plus haute ou par la page d’autorité de cogestion par défaut, si aucune autre page d’autorité de cogestion n’est affectée.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Autorité de cogestion",
"settingDescription": "Les paramètres de cogestion déterminent le propriétaire des charges de travail."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Application système Android Enterprise",
- "androidForWorkApp": "Application du store Google Play géré",
- "androidLobApp": "Application métier Android",
- "androidStoreApp": "Application de l'Android Store",
- "builtInAndroid": "Application Android intégrée",
- "builtInApp": "Application intégrée",
- "builtInIos": "Application iOS intégrée",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "Application métier iOS",
- "iosStoreApp": "Application de l'App Store iOS",
- "iosVppApp": "Application du programme d'achat en volume (VPP) iOS",
- "lineOfBusinessApp": "Application métier",
- "macOSDmgApp": "macOS app (.DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Application métier macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Applications Microsoft 365 (macOS)",
- "macOSPkgApp": "Application macOS (PKG)",
- "macOSWebClip": "Clip web macOS",
- "macOsVppApp": "Application du programme d'achat en volume macOS",
- "managedAndroidLobApp": "Application métier Android gérée",
- "managedAndroidStoreApp": "Application de l'Android Store gérée",
- "managedGooglePlayApp": "Application du store Google Play géré",
- "managedGooglePlayPrivateApp": "Application privée Google Play géré",
- "managedGooglePlayWebApp": "Lien web à Google Play géré",
- "managedIosLobApp": "Application métier iOS gérée",
- "managedIosStoreApp": "Application de l'App Store iOS gérée",
- "microsoftStoreForBusinessApp": "Application du Microsoft Store pour Entreprises",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store pour Entreprises",
- "officeSuiteApp": "Applications Microsoft 365 (Windows 10 et versions ultérieures)",
- "webApp": "Lien web",
- "windowsAppXLobApp": "Application métier appx Windows",
- "windowsClassicApp": "Application Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 et versions ultérieures)",
- "windowsMobileMsiLobApp": "Application métier MSI Windows",
- "windowsPhone81AppXBundleLobApp": "Application métier appx Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "Application métier appx Windows Phone 8.1",
- "windowsPhone81StoreApp": "Application du Windows Phone 8.1 Store",
- "windowsPhoneXapLobApp": "Application métier XAP Windows Phone",
- "windowsStoreApp": "Application Microsoft Store (héritée)",
- "windowsUniversalAppXLobApp": "Application métier appx Windows Universal",
- "windowsUniversalLobApp": "Application métier Windows universelle",
- "windowsWebApp": "Lien web Windows"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Recommandé",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahreïn",
+ "countryNameZA": "Afrique du Sud",
+ "countryNameJO": "Jordanie",
+ "countryNameSD": "Soudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "République tchèque",
+ "countryNameLT": "Lituanie",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Équateur",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Ouganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hong Kong (R.A.S.)",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Arabie saoudite",
+ "countryNamePG": "Papouasie-Nouvelle-Guinée",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "Inde",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Roumanie",
+ "countryNameKZ": "Kazakhstan",
+ "countryNameLC": "Sainte-Lucie",
+ "countryNameGE": "Géorgie",
+ "countryNameTT": "Trinité-et-Tobago",
+ "countryNameMP": "Îles Mariannes du Nord",
+ "countryNameMV": "Maldives",
+ "countryNameFI": "Finlande",
+ "countryNameNO": "Norvège",
+ "countryNameEE": "Estonie",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Ouzbékistan",
+ "countryNameME": "Monténégro",
+ "countryNameTJ": "Tadjikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "France",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italie",
+ "countryNameAZ": "Azerbaïdjan",
+ "countryNameKG": "Kirghizistan",
+ "countryNameWF": "Wallis-et-Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Îles Malouines",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "Soudan du Sud",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haïti",
+ "countryNameSY": "Syrie",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "Saint-Vincent-et-les-Grenadines",
+ "countryNameID": "Indonésie",
+ "countryNameRE": "Réunion",
+ "countryNameER": "Érythrée",
+ "countryNameMK": "Macédoine du Nord",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Polynésie française",
+ "countryNameKY": "Caïmans (Îles)",
+ "countryNameIO": "Territoire britannique de l'océan Indien",
+ "countryNameRU": "Russie",
+ "countryNameMA": "Maroc",
+ "countryNameAU": "Australie",
+ "countryNameBO": "Bolivie",
+ "countryNameVA": "Saint-Siège (État de la Cité du Vatican)",
+ "countryNameVG": "Îles Vierges britanniques",
+ "countryNameFM": "Micronésie",
+ "countryNameAQ": "Antarctique",
+ "countryNameZM": "Zambie",
+ "countryNameBR": "Brésil",
+ "countryNameIS": "Islande",
+ "countryNamePE": "Pérou",
+ "countryNameBG": "Bulgarie",
+ "countryNamePR": "Porto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamas, Les",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macao (R.A.S.)",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "Samoa américaines",
+ "countryNameBQ": "Bonaire, Saint-Eustache et Saba",
+ "countryNameMF": "Saint-Martin",
+ "countryNameTM": "Turkménistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Nouvelle-Calédonie",
+ "countryNameAC": "Île de l'Ascension",
+ "countryNameBN": "Brunéi Darussalam",
+ "countryNameBD": "Bangladesh",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambie",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Canada",
+ "countryNameSH": "Sainte-Hélène",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolie",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Cameroun",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japon",
+ "countryNameCY": "Chypre",
+ "countryNameCD": "Congo (République démocratique du)",
+ "countryNameTN": "Tunisie",
+ "countryNameTR": "Turquie",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Suède",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Cambodge",
+ "countryNamePL": "Pologne",
+ "countryNameDZ": "Algérie",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalie",
+ "countryNameDM": "Dominique",
+ "countryNameEG": "Égypte",
+ "countryNameGF": "Guyane française",
+ "countryNameNZ": "Nouvelle-Zélande",
+ "countryNamePS": "Autorité palestinienne",
+ "countryNameIL": "Israël",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Grèce",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauritanie",
+ "countryNameVI": "Îles Vierges américaines",
+ "countryNameGQ": "Guinée équatoriale",
+ "countryNameMX": "Mexique",
+ "countryNameDJ": "Djibouti",
+ "countryNameGN": "Guinée",
+ "countryNameCN": "Chine",
+ "countryNameMZ": "Mozambique",
+ "countryNameBV": "Île Bouvet",
+ "countryNameNF": "Île Norfolk",
+ "countryNameTZ": "Tanzanie",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "Géorgie du Sud-et-les Îles Sandwich du Sud",
+ "countryNameRS": "Serbie",
+ "countryNameCC": "Îles Cocos (Keeling)",
+ "countryNameNA": "Namibie",
+ "countryNameDE": "Allemagne",
+ "countryNameCG": "Congo (République démocratique du)",
+ "countryNameKW": "Koweït",
+ "countryNameMH": "Marshall (îles)",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Bélarus",
+ "countryNameMY": "Malaisie",
+ "countryNameST": "São Tomé et Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Tchad",
+ "countryNameCX": "Île Christmas",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinée-Bissau",
+ "countryNameUA": "Ukraine",
+ "countryNameCU": "Cuba",
+ "countryNameCO": "Colombie",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Croatie",
+ "countryNameSC": "Seychelles",
+ "countryNameNL": "Pays-Bas",
+ "countryNameUM": "Îles mineures éloignées des États-Unis",
+ "countryNameIM": "Île de Man",
+ "countryNameFJ": "Fidji",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "Saint-Marin",
+ "countryNameLA": "Laos",
+ "countryNameGB": "Royaume-Uni",
+ "countryNameBB": "Barbade",
+ "countryNameSI": "Slovénie",
+ "countryNameAM": "Arménie",
+ "countryNameAR": "Argentine",
+ "countryNamePM": "Saint-Pierre-et-Miquelon",
+ "countryNameTF": "Terres australes et antarctiques françaises",
+ "countryNameDO": "République dominicaine",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "République centrafricaine",
+ "countryNameBE": "Belgique",
+ "countryNameKM": "Comores",
+ "countryNameLY": "Libye",
+ "countryNameIE": "Irlande",
+ "countryNameKP": "Corée du Nord",
+ "countryNameGG": "Guernesey",
+ "countryNameSK": "Slovaquie",
+ "countryNameTC": "Turques-et-Caïques (îles)",
+ "countryNameNP": "Népal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Yémen",
+ "countryNameBA": "Bosnie-Herzégovine",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chili",
+ "countryNameIQ": "Irak",
+ "countryNameSJ": "Svalbard et Jan Mayen",
+ "countryNameAX": "Îles d'Åland",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermudes",
+ "countryNameFO": "Féroé (îles)",
+ "countryNameBL": "Saint-Barthélemy",
+ "countryNameLB": "Liban",
+ "countryNameJM": "Jamaïque",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Espagne",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapour",
+ "countryNameAL": "Albanie",
+ "countryNameSN": "Sénégal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d’Ivoire",
+ "countryNameTW": "Taïwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cook (îles)",
+ "countryNameTH": "Thaïlande",
+ "countryNameHM": "Îles Heard-et-MacDonald",
+ "countryNameGD": "Grenade",
+ "countryNameUS": "États-Unis",
+ "countryNameAT": "Autriche",
+ "countryNameKR": "Corée, République de",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Danemark",
+ "countryNameSV": "Salvador",
+ "countryNamePW": "Palaos",
+ "countryNameET": "Éthiopie",
+ "countryNameMG": "Madagascar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxembourg",
+ "countryNameQA": "Qatar",
+ "countryNameBT": "Bhoutan",
+ "countryNameSB": "Salomon (îles)",
+ "countryNameAE": "Émirats arabes unis",
+ "countryNameAD": "Andorre",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua-et-Barbuda",
+ "countryNameMU": "Maurice",
+ "countryNameHU": "Hongrie",
+ "countryNameSX": "Saint-Martin (partie néerlandaise) ",
+ "countryNameCH": "Suisse",
+ "countryNamePN": "Îles Pitcairn",
+ "countryNameGL": "Groenland",
+ "countryNamePH": "Philippines",
+ "countryNameMT": "Malte",
+ "countryNameKN": "Saint-Christophe-et-Niévès",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Bénin",
+ "countryNameLV": "Lettonie",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Auteur",
+ "template": "Nom du modèle"
+ },
+ "Row": {
+ "ariaLabel": "ligne {0} de {1} colonne {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Démarrez à partir de zéro et sélectionnez les propriétés souhaitées dans la bibliothèque des propriétés d’inventaire disponibles"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Commencez à partir de zéro et sélectionnez les paramètres de votre choix dans la bibliothèque des paramètres disponibles",
+ "title": "Catalogue des paramètres"
+ },
+ "Templates": {
+ "subtitle": "Les modèles contiennent des groupes de paramètres, organisés par fonctionnalité. Utilisez un modèle lorsque vous ne voulez pas créer des stratégies manuellement ou si vous voulez configurer des appareils pour accéder aux réseaux d’entreprise, par exemple pour la configuration du réseau Wi-Fi ou VPN.",
+ "title": "Modèles"
+ },
+ "noData": "Aucun modèle de stratégie n’a été trouvé"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge paramètres SmartScreen recommandés par l’application : Windows 10 dans le modèle de configuration cloud. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Détection et réponse des points de terminaison"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "Isolement des applications et du navigateur",
+ "aSRApplicationControl": "Contrôle de l’application",
+ "aSRAttackSurfaceReduction": "Règles de réduction de la surface d'attaque",
+ "aSRDeviceControl": "Contrôle de l’appareil",
+ "aSRExploitProtection": "Protection contre le code malveillant",
+ "aSRWebProtection": "Protection web (ancienne version de Microsoft Edge)",
+ "aVExclusions": "Exclusions de Microsoft Defender Antivirus",
+ "antivirus": "Microsoft Defender Antivirus",
+ "cloudPC": "Base de référence de sécurité Windows 365",
+ "default": "Sécurité du point de terminaison",
+ "defenderTest": "Démonstration Microsoft Defender pour point de terminaison",
+ "diskEncryption": "BitLocker",
+ "eDR": "Détection et réponse des points de terminaison",
+ "edgeSecurityBaseline": "Base de référence Microsoft Edge",
+ "edgeSecurityBaselinePreview": "Préversion : base de référence Microsoft Edge",
+ "editionUpgradeConfiguration": "Mise à niveau de l'édition et changement de mode",
+ "firewall": "Pare-feu Windows",
+ "firewallRules": "Règles de pare-feu Windows",
+ "identityProtection": "Protection du compte",
+ "identityProtectionPreview": "Protection du compte (préversion)",
+ "mDMSecurityBaseline1810": "Base de référence de sécurité MDM pour Windows 10 et versions ultérieures pour octobre 2018",
+ "mDMSecurityBaseline1810Preview": "Préversion : base de référence de sécurité MDM pour Windows 10 et versions ultérieures pour octobre 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Préversion : base de référence de sécurité MDM pour Windows 10 pour octobre 2018 (bêta)",
+ "mDMSecurityBaseline1906": "Base de référence de sécurité MDM pour Windows 10 et versions ultérieures pour mai 2019",
+ "mDMSecurityBaseline2004": "Base de référence de sécurité MDM pour Windows 10 et versions ultérieures pour août 2020",
+ "mDMSecurityBaseline2101": "Base de référence de sécurité GPM pour Windows 10 et versions ultérieures de décembre 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "Pare-feu macOS",
+ "microsoftDefenderBaseline": "Base de référence Microsoft Defender pour point de terminaison",
+ "office365Baseline": "Base de référence Microsoft Office 365",
+ "office365BaselinePreview": "Préversion : base de référence Microsoft Office 365",
+ "securityBaselines": "Bases de référence de sécurité",
+ "test": "Modèle de test",
+ "testFirewallRulesSecurityTemplateName": "Règles de pare-feu Windows (test)",
+ "testIdentityProtectionSecurityTemplateName": "Protection du compte (test)",
+ "windowsSecurityExperience": "Expérience de sécurité Windows"
+ },
+ "Firewall": {
+ "mDE": "Pare-feu Windows"
+ },
+ "FirewallRules": {
+ "mDE": "Règles de pare-feu Windows"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "Paramètres de déplacement de dossiers connus de OneDrive : Modèle de configuration de Windows 10 dans le nuage. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Protection de compte",
+ "administrativeTemplates": "Modèles d'administration",
+ "androidCompliancePolicy": "Stratégie de conformité Android",
+ "aospDeviceOwnerCompliancePolicy": "Stratégie de conformité Android (AOSP)",
+ "applicationControl": "Contrôle d’application pour les entreprises",
+ "attackSurfaceReductionRules": "Règles de réduction de la surface d'attaque",
+ "bitlocker": "BitLocker",
+ "custom": "Personnalisé",
+ "deliveryOptimization": "Optimisation de livraison",
+ "derivedPersonalIdentityVerificationCredential": "Information d’identification dérivée",
+ "deviceControl": "Contrôle de l'appareil",
+ "deviceFeatures": "Fonctionnalités de l'appareil",
+ "deviceFirmwareConfigurationInterface": "Interface de configuration du microprogramme d'appareil",
+ "deviceLock": "Verrouillage de l’appareil",
+ "deviceOwner": "Profil professionnel complètement managé, dédié et appartenant à l’entreprise",
+ "deviceRestrictions": "Restrictions sur l'appareil",
+ "deviceRestrictionsWindows10Team": "Restrictions sur les appareils (Windows 10 Collaboration)",
+ "domainJoinPreview": "Jonction de domaine",
+ "editionUpgradeAndModeSwitch": "Mise à niveau de l'édition et changement de mode",
+ "education": "Éducation",
+ "email": "E-mail",
+ "emailSamsungKnoxOnly": "E-mail (Samsung KNOX uniquement)",
+ "endpointProtection": "Endpoint protection",
+ "expeditedCheckin": "Configuration de la gestion des périphériques mobiles",
+ "exploitProtection": "Protection Exploit",
+ "extensions": "Extensions",
+ "hardwareConfigurations": "Configurations du BIOS et d’autres paramètres",
+ "identityProtection": "Protection de l’identité",
+ "iosCompliancePolicy": "Stratégie de conformité iOS",
+ "kiosk": "Kiosque",
+ "localUsersAndGroups": "Modifier l’appartenance au groupe de l’utilisateur",
+ "macCompliancePolicy": "Stratégie de conformité Mac",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Base de référence des applications Microsoft 365 pour la sécurité des entreprises",
+ "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
+ "microsoftDefenderAntivirusexclusions": "Exclusions de Microsoft Defender Antivirus",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender pour point de terminaison (appareils de bureau exécutant Windows 10 ou versions ultérieures)",
+ "microsoftDefenderFirewallRules": "Règles de pare-feu Windows",
+ "microsoftDefenderforEndpointSecurityBaseline": "Base de référence de sécurité de Microsoft Defender for Endpoint",
+ "microsoftEdgeBaseline": "Base de référence de sécurité pour Microsoft Edge",
+ "mxProfileZebraOnly": "Profil MX (Zebra uniquement)",
+ "networkBoundary": "Limite réseau",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Remplacer la stratégie de groupe",
+ "pkcsCertificate": "Certificat PKCS",
+ "pkcsImportedCertificate": "Certificat PKCS importé",
+ "preferenceFile": "Fichier de préférences",
+ "presets": "Présélections",
+ "scepCertificate": "Certificat SCEP",
+ "secureAssessmentEducation": "Évaluation sécurisée (éducation)",
+ "securityBaselineForHololens2Advanced": "Base de référence de sécurité avancée pour HoloLens 2",
+ "securityBaselineForHololens2Standard": "Base de référence de sécurité standard pour HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Base de référence de sécurité pour Microsoft Edge",
+ "settingsCatalog": "Catalogue des paramètres",
+ "sharedMultiUserDevice": "Appareil multi-utilisateur partagé",
+ "softwareUpdates": "Mises à jour logicielles",
+ "trustedCertificate": "Certificat approuvé",
+ "unknown": "Inconnu",
+ "unsupported": "Non pris en charge",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Importation Wi-Fi",
+ "windows10CompliancePolicy": "Stratégie de conformité Windows 10/11",
+ "windows10MobileCompliancePolicy": "Stratégie de conformité Windows 10 Mobile",
+ "windows10XScep": "Certificat SCEP - TEST",
+ "windows10XTrustedCertificate": "Certificat approuvé - TEST",
+ "windows10XVPN": "VPN - TEST",
+ "windows10XWifi": "WIFI - TEST",
+ "windows11SecurityBaseline": "Base de référence de sécurité pour Windows 10 et versions ultérieures",
+ "windows365SecurityBaseline": "Base de référence de sécurité Windows 365",
+ "windows8CompliancePolicy": "Stratégie de conformité Windows 8",
+ "windowsHealthMonitoring": "Monitoring de l’intégrité Windows",
+ "windowsInformationProtection": "Protection des informations Windows",
+ "windowsPhoneCompliancePolicy": "Stratégie de conformité Windows Phone",
+ "windowsUpdateforBusiness": "Windows Update pour Entreprise",
+ "wiredNetwork": "Réseau câblé",
+ "workProfile": "Profil de travail personnel"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Rendre les mises à jour disponibles graduellement",
+ "immediateStart": "Rendre les mises à jour disponibles dès que possible",
+ "startDateOnly": "Mettre à jour la disponibilité à une date spécifique"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Refuser automatiquement",
+ "autoGrant": "Accorder automatiquement",
+ "prompt": "Invite"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Accès à l'emplacement (grossier)",
+ "accessFineLocation": "Accès à l'emplacement (fin)",
+ "addVoicemail": "Ajouter un message vocal",
+ "bodySensors": "Autoriser les données de capteurs corporels",
+ "bodySensorsBackground": "Autoriser les données du capteur de corps d’arrière-plan",
+ "callPhone": "Passer des appels téléphoniques",
+ "camera": "Appareil photo",
+ "getAccounts": "Obtenir des comptes",
+ "nearbyDevices": "Appareils à proximité",
+ "nearbyWifiDevices": "Périphériques Wi-Fi à proximité",
+ "postNotifications": "Publier des notifications",
+ "processOutgoingCalls": "Traiter les appels sortants",
+ "readCalendar": "Calendrier (lecture)",
+ "readCallLog": "Journal des appels (lecture)",
+ "readContacts": "Contacts (lecture)",
+ "readExternalStorage": "Stockage externe (lecture)",
+ "readMediaAudio": "Audio multimédia (lecture)",
+ "readMediaImages": "Images multimédias (lecture)",
+ "readMediaVideo": "Vidéo multimédia (lire)",
+ "readPhoneState": "État du téléphone (lecture)",
+ "readSMS": "SMS (lecture)",
+ "receiveMMS": "MMS (réception)",
+ "receiveSMS": "SMS (réception)",
+ "receiveWAPPush": "Messages push WAP (réception)",
+ "recordAudio": "Enregistrer l'audio",
+ "sendSMS": "SMS (envoi)",
+ "useSIP": "Utiliser le service SIP",
+ "writeCalendar": "Calendrier (écriture)",
+ "writeCallLog": "Journal des appels (écriture)",
+ "writeContacts": "Contacts (écriture)",
+ "writeExternalStorage": "Stockage externe (écriture)"
+ },
+ "RemoveDialog": {
+ "description": "Voulez-vous vraiment supprimer l'autorisation ?",
+ "title": "Supprimer"
+ },
+ "TableHeader": {
+ "permission": "Autorisation",
+ "permissionGroup": "Groupe d'autorisations",
+ "permissionName": "Nom de l'autorisation ",
+ "permissionState": "État d'autorisation"
+ },
+ "addButtonLabel": "+Ajouter",
+ "addPermissionTableDescription": "Spécifiez les autorisations à remplacer. Si elles ne sont pas choisies/spécifiées de manière explicite, le comportement par défaut s'applique.",
+ "addPermissionsTitle": "Ajouter des autorisations",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "En savoir plus sur les autorisations d'exécution Android",
+ "permissionTableDescription": "Les autorisations accordées ici remplacent la stratégie « Autorisations des applications par défaut » pour les applications sélectionnées.",
+ "permissionsTitle": "Autorisations"
+ },
+ "AssignmentAction": {
+ "exclude": "Exclu",
+ "include": "Inclus",
+ "includeAllDevicesVirtualGroup": "Inclus",
+ "includeAllUsersVirtualGroup": "Inclus"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Recherche Microsoft en tant que valeur par défaut",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype Entreprise",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "Fichier ou dossier comme spécification sélectionnée.",
+ "pathToolTip": "Chemin complet du fichier ou dossier à détecter.",
+ "property": "Propriété",
+ "valueToolTip": "Sélectionnez une valeur de spécification qui correspond à la méthode de détection sélectionnée. La spécification de date et d'heure doit être entrée dans votre format local."
+ },
+ "GridColumns": {
+ "pathOrScript": "Chemin/script",
+ "type": "Type"
+ },
+ "Registry": {
+ "keyPath": "Chemin de la clé",
+ "keyPathTooltip": "Chemin complet de l'entrée de Registre contenant la valeur de la spécification.",
+ "operator": "Opérateur",
+ "operatorTooltip": "Sélectionnez l'opérateur de la comparaison.",
+ "registryRequirement": "Spécification de clé de Registre",
+ "registryRequirementTooltip": "Sélectionnez la comparaison des spécifications de clé de Registre.",
+ "valueName": "Nom de valeur",
+ "valueNameTooltip": "Nom de la valeur de Registre obligatoire."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Fichier",
+ "registry": "Registre",
+ "script": "Script"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Booléen",
+ "dateTime": "Date et heure",
+ "float": "Virgule flottante",
+ "integer": "Entier",
+ "string": "Chaîne",
+ "version": "Version"
+ },
+ "duplicateName": "Le nom de script {0} est déjà utilisé. Entrez un autre nom.",
+ "enforceSignatureCheck": "Appliquer la vérification de la signature du script",
+ "enforceSignatureCheckTooltip": "Sélectionnez « Oui » pour vérifier que le script est signé par un éditeur approuvé, ce qui permet de l'exécuter sans avertissement ni invite. Le script s'exécute sans blocage. Sélectionnez « Non » (par défaut) pour exécuter le script avec confirmation de l'utilisateur final, mais sans vérification de signature.",
+ "loggedOnCredentials": "Exécuter ce script en utilisant les informations d'identification de l'utilisateur connecté",
+ "loggedOnCredentialsTooltip": "Exécutez le script à l'aide des informations d'identification connectées sur l'appareil.",
+ "operatorTooltip": "Sélectionnez l'opérateur de la comparaison de spécifications.",
+ "requirementMethod": "Sélectionner un type de données de sortie",
+ "requirementMethodTooltip": "Sélectionnez le type de données utilisé pour déterminer une spécification de correspondance de détection.",
+ "scriptContent": "Contenu de script",
+ "scriptFile": "Fichier de script",
+ "scriptFileTooltip": "Sélectionnez un script PowerShell qui détecte la présence de l'application sur le client. Si l'application est détectée, le processus de spécification fournit un code de sortie de valeur 0 et écrit une valeur de chaîne dans STDOUT.",
+ "scriptName": "Nom du script",
+ "value": "Valeur",
+ "valueTooltip": "Sélectionnez une valeur de spécification qui correspond à la méthode de détection sélectionnée. La spécification de date et d'heure doit être entrée dans votre format local."
+ },
+ "bladeTitle": "Ajouter une règle de spécification",
+ "createRequirementHeader": "Créez une spécification.",
+ "header": "Configurer d'autres règles de spécification",
+ "label": "Règles de spécification supplémentaires",
+ "noRequirementsSelectedPlaceholder": "Aucune spécification spécifiée.",
+ "requirementType": "Type de spécification",
+ "requirementTypeTooltip": "Choisissez le type de méthode de détection utilisé pour déterminer comment valider une spécification."
+ },
+ "architectures": "Architecture du système d'exploitation",
+ "architecturesTooltip": "Choisissez les architectures nécessaires pour installer l'application.",
+ "bladeTitle": "Spécifications",
+ "diskSpace": "Espace disque nécessaire (Mo)",
+ "diskSpaceTooltip": "Espace disque nécessaire sur le lecteur système pour installer l'application.",
+ "header": "Spécifiez les conditions que les appareils doivent remplir avant l'installation de l'application :",
+ "maximumTextFieldValue": "La valeur doit être de {0} maximum.",
+ "minimumCpuSpeed": "Vitesse de processeur minimale nécessaire (MHz)",
+ "minimumCpuSpeedTooltip": "Vitesse de processeur minimale nécessaire pour installer l'application.",
+ "minimumLogicalProcessors": "Nombre minimal de processeurs logiques nécessaires",
+ "minimumLogicalProcessorsTooltip": "Nombre minimal de processeurs logiques nécessaires pour installer l'application.",
+ "minimumOperatingSystem": "Système d'exploitation minimal",
+ "minimumOperatingSystemTooltip": "Sélectionnez le système d'exploitation minimum nécessaire pour installer l'application.",
+ "minumumTextFieldValue": "La valeur doit correspondre au moins à {0}.",
+ "physicalMemory": "Mémoire physique nécessaire (Mo)",
+ "physicalMemoryTooltip": "Mémoire physique (RAM) nécessaire pour installer l'application.",
+ "selectorLabel": "Spécifications",
+ "validNumber": "Entrez un nombre valide."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filtrer",
+ "assignmentFilterTypeColumnHeader": "Mode Filtrer",
+ "assignmentToast": "Notifications de l’utilisateur final",
+ "assignmentTypeTableHeader": "TYPE D’AFFECTATION",
+ "autoUpdate": "Mise à jour automatique",
+ "deadlineTimeColumnLabel": "Échéance de l’installation",
+ "deliveryOptimizationPriorityHeader": "Priorité d’optimisation de la distribution",
+ "groupTableHeader": "Groupe",
+ "installContextLabel": "Contexte d’installation",
+ "isRemovable": "Installer comme amovible",
+ "licenseTypeLabel": "Type de licence",
+ "modeTableHeader": "Mode Groupe",
+ "policySet": "Ensemble de stratégies",
+ "preventAutoAppUpdate": "Empêcher les mises à jour automatiques des applications",
+ "preventManagedAppBackup": "Empêcher la sauvegarde d’application iCloud",
+ "restartGracePeriodHeader": "Période de grâce de redémarrage",
+ "startTimeColumnLabel": "Disponibilité",
+ "tracks": "Suivis",
+ "uninstallOnRemoval": "Désinstaller lors de la suppression de l'appareil",
+ "updateMode": "Priorité de mise à jour",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "Application Web AAD",
+ "androidEnterpriseSystemApp": "Application système Android Enterprise",
+ "androidForWorkApp": "Application du store Google Play géré",
+ "androidLobApp": "Application métier Android",
+ "androidStoreApp": "Application de l'Android Store",
+ "builtInAndroid": "Application Android intégrée",
+ "builtInApp": "Application intégrée",
+ "builtInIos": "Application iOS intégrée",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "Application métier iOS",
+ "iosStoreApp": "Application de l'App Store iOS",
+ "iosVppApp": "Application du programme d'achat en volume (VPP) iOS",
+ "lineOfBusinessApp": "Application métier",
+ "macOSDmgApp": "macOS app (.DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Application métier macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Suite Office pour macOS",
+ "macOSPkgApp": "Application macOS (PKG)",
+ "macOSWebClip": "Clip web macOS",
+ "macOsVppApp": "Application du programme d'achat en volume macOS",
+ "managedAndroidLobApp": "Application métier Android gérée",
+ "managedAndroidStoreApp": "Application de l'Android Store gérée",
+ "managedGooglePlayApp": "Application du store Google Play géré",
+ "managedGooglePlayPrivateApp": "Application privée Google Play géré",
+ "managedGooglePlayWebApp": "Lien web à Google Play géré",
+ "managedIosLobApp": "Application métier iOS gérée",
+ "managedIosStoreApp": "Application de l'App Store iOS gérée",
+ "microsoftStoreForBusinessApp": "Application du Microsoft Store pour Entreprises",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store pour Entreprises",
+ "officeAddIn": "Complément Office",
+ "officeSuiteApp": "Applications Microsoft 365 (Windows 10 et versions ultérieures)",
+ "sharePointApp": "Application SharePoint",
+ "teamsApp": "Application Teams",
+ "webApp": "Lien web",
+ "win32CatalogApp": "Application de catalogue Windows (Win32)",
+ "winGetPublicApp": "Référentiel de communauté du gestionnaire de package Windows",
+ "winGetStoreApp": "Application Microsoft Store (nouvelle)",
+ "windowsAppXLobApp": "Application métier appx Windows",
+ "windowsClassicApp": "Application Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 et versions ultérieures)",
+ "windowsMobileMsiLobApp": "Application métier MSI Windows",
+ "windowsPhone81AppXBundleLobApp": "Application métier appx Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "Application métier appx Windows Phone 8.1",
+ "windowsPhone81StoreApp": "Application du Windows Phone 8.1 Store",
+ "windowsPhoneXapLobApp": "Application métier XAP Windows Phone",
+ "windowsStoreApp": "Application Microsoft Store (héritée)",
+ "windowsUniversalAppXLobApp": "Application métier appx Windows Universal",
+ "windowsUniversalLobApp": "Application métier Windows universelle",
+ "windowsWebApp": "Lien web Windows"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Exclu",
+ "include": "Inclus",
+ "includeAllDevicesVirtualGroup": "Inclus",
+ "includeAllUsersVirtualGroup": "Inclus"
+ },
+ "AssignmentToast": {
+ "hideAll": "Masquer toutes les notifications toast",
+ "showAll": "Afficher toutes les notifications toast",
+ "showReboot": "Afficher les notifications toast pour les redémarrages d'ordinateur"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Oui",
+ "notConfigured": "Aucun"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Arrière-plan",
+ "displayText": "Téléchargement de contenu dans {0}",
+ "foreground": "Premier plan",
+ "header": "Priorité d’optimisation de la distribution"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "L'installation de l'application peut forcer le redémarrage de l'appareil",
+ "basedOnReturnCode": "Déterminer le comportement en fonction des codes de retour",
+ "force": "Intune force le redémarrage obligatoire de l'appareil",
+ "suppress": "Aucune action spécifique"
+ },
+ "FilterType": {
+ "exclude": "Exclure",
+ "include": "Inclure",
+ "none": "Aucun"
+ },
+ "InstallIntent": {
+ "available": "Disponible pour les appareils inscrits",
+ "availableWithoutEnrollment": "Disponible avec ou sans inscription",
+ "notApplicable": "Non applicable",
+ "required": "Obligatoire",
+ "uninstall": "Désinstaller"
+ },
+ "SettingType": {
+ "assignmentType": "Type d'attribution",
+ "deviceLicensing": "Type de licence",
+ "installContext": "Désinstaller lors de la suppression de l'appareil",
+ "toastSettings": "Notifications de l'utilisateur final",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Par défaut",
+ "postponed": "Différé",
+ "priority": "Haute priorité"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Échec",
+ "hardReboot": "Redémarrage matériel",
+ "retry": "Réessayer",
+ "softReboot": "Redémarrage logiciel",
+ "success": "Opération réussie"
+ },
+ "Columns": {
+ "codeType": "Type de code",
+ "returnCode": "Code de retour"
+ },
+ "bladeTitle": "Codes de retour",
+ "gridAriaLabel": "Codes de retour",
+ "header": "Spécifier des codes de retour pour indiquer le comportement postinstallation :",
+ "onAddAnnounceMessage": "Le code de retour a ajouté l'élément {0} sur {1}",
+ "onDeleteSuccess": "Le code de retour {0} a été correctement supprimé",
+ "returnCodeAlreadyUsedValidation": "Code de retour déjà utilisé.",
+ "returnCodeMustBeIntegerValidation": "Le code de retour doit être un entier.",
+ "returnCodeShouldBeAtLeast": "Le code de retour doit être au moins {0}.",
+ "returnCodeShouldBeAtMost": "Le code de retour doit être au plus {0}.",
+ "selectorLabel": "Codes de retour"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone et iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Ajouter une limite réseau",
+ "addNetworkBoundaryButton": "Ajouter une limite réseau...",
+ "allowWindowsSearch": "Autoriser Windows Search à rechercher dans les données d'entreprise chiffrées et dans les applications du Windows Store",
+ "authoritativeIpRanges": "La liste Plages IP de l'entreprise fait autorité (ne pas détecter automatiquement)",
+ "authoritativeProxyServers": "La liste Serveurs proxy de l'entreprise fait autorité (ne pas détecter automatiquement)",
+ "boundaryType": "Type de limite",
+ "cloudResources": "Ressources cloud",
+ "corporateIdentity": "Identité d'entreprise",
+ "dataRecoveryCert": "Charger un certificat d'agent de récupération de données pour autoriser la récupération de données chiffrées",
+ "editNetworkBoundary": "Modifier la limite réseau",
+ "enrollmentState": "État de l'inscription",
+ "iPv4Ranges": "Plages d'adresses IPv4",
+ "iPv6Ranges": "Plages d'adresses IPv6",
+ "internalProxyServers": "Serveurs proxy internes",
+ "maxInactivityTime": "Durée maximale (en minutes) autorisée pendant laquelle l'appareil peut rester inactif avant d'être verrouillé par un mot de passe ou un code PIN",
+ "maxPasswordAttempts": "Nombre d'échecs d'authentification autorisés avant la réinitialisation de l'appareil",
+ "mdmDiscoveryUrl": "URL de détection MDM",
+ "mdmRequiredSettingsInfo": "Cette stratégie s'applique uniquement à Windows 10 Édition anniversaire et supérieure. Cette stratégie utilise la Protection des informations Windows pour appliquer la protection.",
+ "minimumPinLength": "Définir le nombre minimal de caractères obligatoires dans le code PIN",
+ "name": "Nom",
+ "networkBoundariesGridEmptyText": "Les limites réseau que vous ajoutez apparaissent ici",
+ "networkBoundary": "Limite réseau",
+ "networkDomainNames": "Domaines réseau",
+ "neutralResources": "Ressources neutres",
+ "passportForWork": "Utiliser Windows Hello Entreprise comme mode de connexion à Windows",
+ "pinExpiration": "Spécifier la durée (en jours) pendant laquelle un code PIN peut être utilisé avant que le système demande à l'utilisateur de le changer",
+ "pinHistory": "Spécifier le nombre d'anciens codes PIN associés à un compte d'utilisateur qui peuvent être réutilisés",
+ "pinLowercaseLetters": "Configurer l'utilisation des lettres minuscules dans le code PIN Windows Hello Entreprise",
+ "pinSpecialCharacters": "Configurer l'utilisation des caractères spéciaux dans le code PIN Windows Hello Entreprise",
+ "pinUppercaseLetters": "Configurer l'utilisation des lettres majuscules dans le code PIN Windows Hello Entreprise",
+ "protectUnderLock": "Empêcher les applications d'accéder aux données d'entreprise quand l'appareil est verrouillé. S'applique uniquement à Windows 10 Mobile",
+ "protectedDomainNames": "Domaines protégés",
+ "proxyServers": "Serveurs proxy",
+ "requireAppPin": "Désactiver le code PIN de l'application quand le code PIN de l'appareil est géré",
+ "requiredSettings": "Paramètres obligatoires",
+ "requiredSettingsInfo": "Le changement d'étendue ou la suppression de cette stratégie entraîne le déchiffrement des données d'entreprise.",
+ "revokeOnMdmHandoff": "Révoquer l'accès aux données protégées quand l'appareil s'inscrit à MDM",
+ "revokeOnUnenroll": "Révoquer les clés de chiffrement lors de la désinscription",
+ "rmsTemplateForEdp": "Spécifier l'ID de modèle à utiliser pour Azure RMS",
+ "showWipIcon": "Afficher l'icône de protection des données d'entreprise",
+ "type": "Type",
+ "useRmsForWip": "Utiliser Azure RMS pour WIP",
+ "value": "Valeur",
+ "weRequiredSettingsInfo": "Cette stratégie s'applique uniquement à Windows 10 Creators Update et ultérieur. Cette stratégie utilise la Protection des informations Windows et la gestion des applications mobiles Windows pour appliquer la protection.",
+ "wipProtectionMode": "Mode Protection des informations Windows",
+ "withEnrollment": "Avec inscription",
+ "withoutEnrollment": "Sans inscription"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabe",
+ "bulgarian": "Bulgare",
+ "chineseSimplified": "Chinois (simplifié)",
+ "chineseTraditional": "Chinois (traditionnel)",
+ "croatian": "Croate",
+ "czech": "Tchèque",
+ "danish": "Danois",
+ "dutch": "Néerlandais",
+ "englishUK": "Anglais (Royaume-Uni)",
+ "englishUS": "Anglais (États-Unis)",
+ "estonian": "Estonien",
+ "finnish": "Finnois",
+ "frenchCanada": "Français (Canada)",
+ "frenchFrance": "Français (France)",
+ "german": "Allemand",
+ "greek": "Grec",
+ "hebrew": "Hébreu",
+ "hungarian": "Hongrois",
+ "italian": "Italien",
+ "japanese": "Japonais",
+ "korean": "Coréen",
+ "latvian": "Letton",
+ "lithuanian": "Lituanien",
+ "norwegian": "Norvégien, Bokmål",
+ "polish": "Polonais",
+ "portugueseBrazil": "Portugais (Brésil)",
+ "portuguesePortugal": "Portugais (Portugal)",
+ "romanian": "Roumain",
+ "russian": "Russe",
+ "serbian": "Serbe",
+ "slovak": "Slovaque",
+ "slovenian": "Slovène",
+ "spanishMexico": "Espagnol (Mexique)",
+ "spanishSpain": "Espagnol (Espagne)",
+ "swedish": "Suédois",
+ "thai": "Thaïlande",
+ "turkish": "Turc",
+ "ukrainian": "Ukrainien"
+ },
+ "Summary": {
+ "placeholder": "Sélectionnez un message de notification dans la partie gauche pour afficher un aperçu du contenu."
+ },
+ "companyContact": "Afficher les informations de contact",
+ "companyLogo": "Afficher le logo de la société",
+ "companyName": "Afficher le nom de la société",
+ "createEditDescription": "Créez ou modifiez des modèles de messages de notification.",
+ "createMessage": "Créer un message",
+ "deviceDetails": "Afficher les détails de l’appareil",
+ "deviceDetailsInfoBox": "Ce paramètre est désactivé par défaut, car la récupération des détails de l'appareil peut retarder la réception des notifications par e-mail.",
+ "editImpactInfo": "La modification de ce modèle de message de notification affecte toutes les stratégies qui utilisent le modèle.",
+ "editMessage": "Modifier le message",
+ "email": "e-mail",
+ "emailFooterTitle": "Pied de page de l'Email",
+ "emailHeaderFooterInfo": "Les paramètres d’en-tête et de pied de page de l’e-mail pour les notifications par e-mail s’appuient sur les paramètres de personnalisation dans le nœud d’administration du client dans Endpoint Manager.",
+ "emailHeaderTitle": "En-tête de l'Email",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Configurer les paramètres de personnalisation",
+ "formSubTitle": "Créer ou modifier des e-mails de notification",
+ "headerFooterSettingsTab": "Paramètres d’en-tête et de pied de page",
+ "imgPreview": "Aperçu de l'image",
+ "infotext": "Sélectionnez un message de notification. Pour créer une notification, accédez à Notification dans la section Gérer de la charge de travail Définir la conformité des appareils.",
+ "iwLink": "Afficher le lien du site web du portail d’entreprise",
+ "listEmpty": "Aucun modèle de message.",
+ "listEmptySelectOnly": "Aucun modèle de message. Pour créer une notification, consultez Notifications dans la section Gérer de la charge de travail Définir la conformité des appareils.",
+ "listSubTitle": "Liste des modèles de messages de notification",
+ "listTitle": "Modèles de message de notification",
+ "localizedNotificationMessageTemplates": "Modèles de message de notification localisés",
+ "messageAssigned": "Impossible de supprimer ce modèle de message, car il est actuellement utilisé par une ou plusieurs stratégies de conformité.",
+ "messageCapitalized": "Modèle de message de notification",
+ "messageLowercase": "modèle de message de notification",
+ "missingDefaultError": "Sélectionnez un modèle par défaut",
+ "notificationMessageTemplates": "Modèles de message de notification",
+ "rowValidationError": "Au moins un modèle de message est requis",
+ "selectDescription": "Sélectionnez un message de notification. Pour créer une notification, accédez à Notifications dans la section Gérer de la charge de travail Définir la conformité des appareils.",
+ "tenantValueText": "Valeur du locataire",
+ "testEmailLabel": "Envoyer un aperçu de l'e-mail",
+ "localeLabel": "Paramètres régionaux",
+ "isDefaultLocale": "Est par défaut"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Configurez les appareils pour l’approvisionnement initial.",
+ "title": "Préparation de l'appareil"
+ },
+ "EnrollmentSettings": {
+ "description": "Configurez les paramètres d’inscription, tels que le blocage de l’inscription et l’attribution aux utilisateurs.",
+ "title": "Paramètres d'inscription"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Configurez les paramètres que les utilisateurs peuvent utiliser pour récupérer Windows à partir d'un lecteur flash amorçable.",
+ "menuTitle": "Configuration de la récupération du système d’exploitation Windows"
+ },
+ "coManagementAuthorityDesc": "Configurer les paramètres de cogestion pour l’intégration Configuration Manager",
+ "coManagementAuthorityTitle": "Paramètres de cogestion ",
+ "deploymentProfiles": "Profils Windows AutoPilot Deployment",
+ "description": "Découvrez les sept différentes façons d'inscrire un PC Windows 10/11 dans Intune par les utilisateurs ou les administrateurs.",
+ "descriptionLabel": "Méthodes d’inscription Windows",
+ "enrollmentStatusPage": "Page d'état de l'inscription"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Sélectionnez le nombre de bits contenus dans la clé.",
+ "keyUsage": "Spécifiez l'action de chiffrement obligatoire pour échanger la clé publique du certificat.",
+ "renewalThreshold": "Entrez le pourcentage (entre 1 et 99) de durée de vie restante du certificat avant qu'un appareil demande le renouvellement du certificat. La valeur recommandée dans Intune est 20 %. (1-99)",
+ "rootCert": "Choisissez un profil de certificat d'autorité de certification racine précédemment configuré et affecté. Le certificat d'autorité de certification doit correspondre au certificat racine de l'autorité de certification qui émet le certificat pour ce profil (celui que vous configurez).",
+ "scepServerUrl": "Entrez l’URL du serveur NDES qui émet les certificats via SCEP (Doit être HTTPS). Par ex., https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Ajoutez une ou plusieurs URL pour le serveur NDES qui émet des certificats par SCEP (doit être en HTTPS). Par ex. https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Autre nom de l'objet",
+ "subjectNameFormat": "Format du nom de l'objet",
+ "validityPeriod": "Quantité de temps restante avant l'expiration du certificat. Entrez une valeur égale ou inférieure à la période de validité affichée dans le modèle de certificat. La valeur par défaut est égale à un an."
+ },
+ "appInstallContext": "Cette option spécifie le contexte d'installation à associer à cette application. Pour les applications en mode double, sélectionnez le contexte souhaité pour l'application. Pour toutes les autres applications, le contexte est présélectionné selon le package et n'est pas modifiable.",
+ "autoUpdateMode": "Configurez la priorité de mise à jour de l’application. Sélectionnez Par défaut pour exiger que l’appareil soit connecté au Wi-Fi, qu’il soit en charge et qu’il ne soit pas activement utilisé avant la mise à jour de l’application. Sélectionnez Priorité élevée pour mettre à jour l’application dès que le développeur a publié l’application, quel que soit l’état de charge, la capacité Wi-Fi ou l’activité de l’utilisateur final sur l’appareil. Sélectionnez Reporté pour renoncer aux mises à jour de l’application pendant 90 jours maximum. La haute priorité et le différé ne prendront effet que sur les appareils DO.",
+ "configurationSettingsFormat": "Texte du format des paramètres de configuration",
+ "ignoreVersionDetection": "Définissez cette valeur sur \"Oui\" pour les applications automatiquement mises à jour par le développeur de l'application (comme Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Sélectionnez « Oui » pour les applications qui sont automatiquement mises à jour par le développeur d’applications ou pour vérifier uniquement l’ID de bundle d’application avant l’installation. Sélectionnez « Non » pour vérifier l’ID de bundle d’application et le numéro de version avant l’installation.",
+ "installAsManagedMacOSLobApp": "Ce paramètre s’applique uniquement à macOS 11 et versions ultérieures. L’application sera installée, mais elle ne sera pas managée sur macOS 10.15 et versions antérieures.",
+ "installContextDropdown": "Sélectionnez le contexte d'installation approprié. Le contexte utilisateur installe l'application uniquement pour l'utilisateur ciblé, alors que le contexte d'appareil installe l'application pour tous les utilisateurs sur l'appareil.",
+ "ldapUrl": "Il s’agit du nom d’hôte LDAP où les clients peuvent obtenir les clés de chiffrement publiques pour les destinataires des e-mails. Les e-mails seront chiffrés quand une clé sera disponible. Formats pris en charge :
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Sélectionnez les autorisations d'exécution pour l'application associée.",
+ "policyAssociatedApp": "Sélectionnez l'application à laquelle cette stratégie va être associée.",
+ "policyConfigurationSettings": "Sélectionnez la méthode à utiliser pour définir les paramètres de configuration de cette stratégie.",
+ "policyDescription": "Éventuellement, entrez une description pour cette stratégie de configuration.",
+ "policyEnrollmentType": "Indiquez si ces paramètres sont gérés par le biais de la gestion des appareils ou d'applications créées avec le SDK Intune.",
+ "policyName": "Entrez un nom pour cette stratégie de configuration.",
+ "policyPlatform": "Sélectionnez la plateforme à laquelle cette stratégie de configuration d'application va être appliquée.",
+ "policyProfileType": "Sélectionnez les types de profils d’appareil auxquels ce profil de configuration d’application doit s’appliquer",
+ "policySMime": "Configurez les paramètres de chiffrement et de signature S/MIME pour Outlook.",
+ "sMimeDeployCertsFromIntune": "Spécifiez si les certificats S/MIME seront fournis par Intune pour une utilisation avec Outlook.\r\nIntune peut déployer automatiquement les certificats de signature et de chiffrement aux utilisateurs par le biais du portail d'entreprise.",
+ "sMimeEnable": "Indiquer si les contrôles S/MIME sont activés au moment de la composition d'un e-mail",
+ "sMimeEnableAllowChange": "Indiquez si l'utilisateur est autorisé à changer le paramètre Activer S/MIME.",
+ "sMimeEncryptAllEmails": "Spécifiez si tous les e-mails doivent être chiffrés.\r\nLe chiffrement convertit les données en texte chiffré que seul le destinataire visé peut lire.",
+ "sMimeEncryptAllEmailsAllowChange": "Indiquez si l'utilisateur est autorisé à changer le paramètre Chiffrer tous les e-mails.",
+ "sMimeEncryptionCertProfile": "Spécifiez le profil de certificat pour le chiffrement d'e-mail.",
+ "sMimeSignAllEmails": "Spécifiez si tous les e-mails doivent être signés.\r\nUne signature numérique vérifie l'authenticité de l'e-mail et garantit que le contenu n'est pas falsifié en transit.",
+ "sMimeSignAllEmailsAllowChange": "Indiquez si l'utilisateur est autorisé à changer le paramètre Signer tous les e-mails.",
+ "sMimeSigningCertProfile": "Spécifiez le profil de certificat pour la signature d'e-mail.",
+ "sMimeUserNotificationType": "Méthode notifiant les utilisateurs qu'ils doivent ouvrir le portail d'entreprise pour récupérer les certificats S/MIME pour Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} est inclus dans un ou plusieurs ensembles de stratégies. Si vous supprimez {0}, vous ne serez plus en mesure de l'affecter par l'intermédiaire de ces ensembles de stratégies. Supprimer quand même ?",
+ "contentWithError": "{0} est peut-être inclus dans un ou plusieurs ensembles de stratégies. Si vous supprimez {0}, vous ne serez plus en mesure de l'affecter par l'intermédiaire de ces ensembles de stratégies. Supprimer quand même ?",
+ "header": "Voulez-vous vraiment supprimer cette restriction ?"
+ },
+ "DeviceLimit": {
+ "description": "Spécifiez le nombre maximal d'appareils qu'un utilisateur peut inscrire.",
+ "header": "Restrictions de limite d'appareils",
+ "info": "Définissez le nombre d'appareils que chaque utilisateur peut inscrire."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Doit être supérieur ou égal à 1.0.",
+ "android": "Entrez un numéro de version valide. Exemples : 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Entrez un numéro de version valide. Par exemple : 5.0, 5.1.1",
+ "iOS": "Entrez un numéro de version valide. Exemples : 9.0, 10.0, 9.0.2",
+ "mac": "Entrez un numéro de version valide. Exemples : 10, 10.10, 10.10.1",
+ "min": "La valeur minimale ne peut pas être inférieure à {0}",
+ "minMax": "La version minimale ne peut pas être supérieure à la version maximale.",
+ "windows": "Doit être la version 10.0 ou ultérieur. Laisser vide pour autoriser les appareils Windows 8.1",
+ "windowsMobile": "Doit être la version 10.0 ou ultérieur. Laisser vide pour autoriser les appareils Windows 8.1"
+ },
+ "allPlatformsBlocked": "Toutes les plateformes d'appareils sont bloquées. Autorisez l'inscription des plateformes pour permettre leur configuration.",
+ "blockManufacturerPlaceHolder": "Nom du fabricant",
+ "blockManufacturersHeader": "Fabricants bloqués",
+ "cannotRestrict": "Restriction non prise en charge",
+ "configurationDescription": "Spécifiez les restrictions de configuration de plateforme que doit respecter un appareil pour l'inscription. Utilisez des stratégies de conformité pour restreindre les appareils après l'inscription. Définissez des versions au format major.minor.build. Les restrictions de version s'appliquent uniquement aux appareils inscrits avec le portail d'entreprise. Intune classe les appareils comme personnels par défaut. Une action supplémentaire est nécessaire pour classer les appareils comme appartenant à l'entreprise.",
+ "configurationDescriptionLabel": "En savoir plus sur la définition de restrictions d’inscription",
+ "configurations": "Configurer des plateformes",
+ "deviceManufacturer": "Fabricant du périphérique",
+ "header": "Restrictions de type d'appareil",
+ "info": "Définissez les types de plateforme, de version et de gestion qui peuvent être inscrits.",
+ "manufacturer": "Fabricant",
+ "max": "Max",
+ "maxVersion": "Version maximale",
+ "min": "Min",
+ "minVersion": "Version minimale",
+ "newPlatforms": "Vous avez autorisé de nouvelles plateformes. Mettez à jour les configurations de plateforme.",
+ "personal": "Propriété personnelle",
+ "platform": "Plateforme",
+ "platformDescription": "Vous pouvez autoriser l'inscription des plateformes suivantes. Bloquez seulement les plateformes que vous ne pouvez pas prendre en charge. Les plateformes autorisées peuvent être configurées avec des restrictions d'inscription supplémentaires.",
+ "platformSettings": "Paramètres de plateforme",
+ "platforms": "Sélectionner des plateformes",
+ "platformsSelected": "{0} plateformes sélectionnées",
+ "type": "Type",
+ "versions": "versions",
+ "versionsRange": "Autoriser des valeurs min./max. :",
+ "windowsTooltip": "Restreint l'inscription par le biais de la gestion des appareils mobiles (MDM). Ne restreint pas l'installation de l'agent de PC. Seules les versions Windows 10 et Windows 11 sont prises en charge. N'indiquez pas de version afin d'autoriser Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Les priorités de restriction ont été enregistrées."
+ },
+ "Row": {
+ "announce": "Priorité : {0}. Nom : {1}. Attribué : {2}"
+ },
+ "Table": {
+ "deployed": "Déployées",
+ "name": "Nom",
+ "priority": "Priorité"
+ },
+ "Type": {
+ "limit": "Restriction du nombre limite d'appareils",
+ "type": "Restriction du type d'appareil"
+ },
+ "allUsers": "Tous les utilisateurs",
+ "androidRestrictions": "Restrictions Android",
+ "create": "Créer une restriction",
+ "defaultLimitDescription": "Il s'agit de la restriction de limite d'appareils par défaut appliquée avec la priorité la plus basse à tous les utilisateurs, quelle que soit leur appartenance à un groupe.",
+ "defaultTypeDescription": "Il s'agit de la restriction de type d'appareil par défaut appliquée avec la priorité la plus basse à tous les utilisateurs, quelle que soit leur appartenance à un groupe.",
+ "defaultWhfbDescription": "Il s'agit de la configuration par défaut de Windows Hello Entreprise appliquée avec la priorité la plus basse à tous les utilisateurs, quelle que soit leur appartenance à un groupe.",
+ "deleteMessage": "Les utilisateurs impactés seront limités par la restriction de priorité la plus élevée suivante qui a été affectée, ou par la restriction par défaut si aucune autre restriction n'est affectée.",
+ "deleteTitle": "Voulez-vous vraiment supprimer la restriction {0} ?",
+ "descriptionHint": "Court paragraphe décrivant l'utilisation professionnelle ou le niveau de restriction caractérisé par les paramètres de restriction.",
+ "edit": "Modifier la restriction",
+ "info": "Un appareil doit respecter les restrictions d'inscription affectées à l'utilisateur qui ont la priorité la plus haute. Vous pouvez faire glisser une restriction d'appareil pour changer sa priorité. Les restrictions par défaut ont la priorité la plus basse pour tous les utilisateurs et régissent les inscriptions sans utilisateur. Les restrictions par défaut peuvent être modifiées, mais pas supprimées.",
+ "iosRestrictions": "Restrictions iOS",
+ "mDM": "GPM",
+ "macRestrictions": "Restrictions MacOS",
+ "maxVersion": "Version maximale",
+ "minVersion": "Version minimale",
+ "nameHint": "Il s'agit de l'attribut principal visible pour identifier le jeu de restrictions.",
+ "noAssignmentsStatusBar": "Affectez une restriction à au moins un groupe. Cliquez sur Propriétés.",
+ "nonAdminForbiddenCreateError": "Vous devez être Intune Service ou Administrateur(-trice) général(e) pour créer, modifier ou supprimer des restrictions.",
+ "nonAdminForbiddenEdit": "Vous devez être administrateur pour modifier les restrictions.",
+ "notFound": "Restriction introuvable.Elle a peut-être déjà été supprimée.",
+ "personallyOwned": "Appareils personnels",
+ "restriction": "Restriction",
+ "restrictionLowerCase": "restriction",
+ "restrictionType": "Restriction Type",
+ "selectType": "Sélectionner le type de restriction",
+ "selectValidation": "Sélectionnez une plateforme",
+ "typeHint": "Choisissez Restriction de type d'appareil pour restreindre les propriétés de l'appareil. Choisissez Restriction de limite d'appareils pour limiter le nombre d'appareils par utilisateur.",
+ "typeRequired": "Le type de restriction est obligatoire.",
+ "winPhoneRestrictions": "Restrictions Windows Phone",
+ "windowsECv1Info": "Les restrictions d’inscription plus anciennes ne peuvent pas être modifiées ou redimensionnées. Seules les restrictions ont été supprimées.",
+ "windowsECv2Info": "Vous pouvez classer par ordre de priorité les restrictions d’inscription en les faisant glisser et en les supprimant. Affichez les restrictions par défaut et préconfigurées ci-dessous. Toutes les nouvelles restrictions d’inscription auront une priorité supérieure à celle des restrictions par défaut et préconfigurées.",
+ "windowsRestrictions": "Restrictions Windows",
+ "windowsRestrictionsPreview": "Restrictions Windows basées sur les filtres (préversion)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 jour",
+ "twoDays": "2 jours",
+ "zeroDays": "0 jour"
+ },
+ "SecurityTemplate": {
+ "aSR": "Réduction de la surface d'attaque",
+ "accountProtection": "Protection de compte",
+ "allDevices": "Tous les appareils",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Rapports de l’antivirus (préversion)",
+ "conditionalAccess": "Accès conditionnel",
+ "deviceCompliance": "Conformité de l'appareil",
+ "diskEncryption": "Chiffrement de disque",
+ "eDR": "Détection et réponse des points de terminaison",
+ "ePM": "Gestion des privilèges de point de terminaison",
+ "firewall": "Pare-feu",
+ "helpSupport": "Aide et support",
+ "setup": "Installation",
+ "wdapt": "Microsoft Defender pour point de terminaison"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Configuration de la protection des données"
+ },
+ "OrganizeMailByThread": {
+ "title": "Organiser le courrier par conversation",
+ "tooltip": "Le comportement par défaut dans Outlook consiste à regrouper les conversations dans une vue par conversation. Si ce paramètre est désactivé, Outlook affiche les courriers individuellement et ne les regroupe pas par conversation."
+ },
+ "Sync": {
+ "header": "Configuration de la synchronisation des champs de contact avec ceux de l'application de contacts native"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
+ "allowBiometricsTitle": "Exiger des données biométriques pour accéder à l'application",
+ "allowBiometricsTooltip": "Des données biométriques, comme TouchID ou FaceID, peuvent être demandées aux utilisateurs pour leur permettre d'accéder à l'application sur leur appareil. Le cas échéant, les données biométriques sont utilisées en plus de la méthode d'authentification sélectionnée dans ce profil. N'activez pas ce paramètre si des stratégies Intune App Protection sont déployées, car la stratégie de protection des applications inclut des conditions d'accès préalables à l'accès aux données managées. L'activation des deux entraîne l'affichage de plusieurs invites d'accès à Outlook Mobile. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
+ "allowCalendarNotificationsTitle": "Notifications du calendrier",
+ "allowCalendarNotificationsTooltip": "Autoriser les notifications de calendrier à afficher tous les détails lorsque le paramètre de stratégie de protection des applications « Notifications des données de l’organisation » est défini sur « Bloquer les données de l’organisation ».",
+ "allowDefaultAppSignatureTitle": "Signature d'application par défaut",
+ "allowDefaultAppSignatureTooltip": "La signature d'application par défaut indique si l'application utilise « Obtenir Outlook pour iOS » comme signature par défaut pendant la composition du message. Si le paramètre est désactivé, la signature par défaut n'est pas utilisée. Toutefois, les utilisateurs peuvent ajouter leur propre signature. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Activé.",
+ "allowExternalRecipientsMailTipTitle": "Info courrier Destinataires externes",
+ "allowExternalRecipientsMailTipTooltip": "L’info courrier Destinataires externes s’affiche si l’expéditeur ajoute un destinataire externe ou un groupe de distribution contenant des destinataires externes. Cette info courrier informe les expéditeurs que le message qu’ils composent va sortir de l’organisation, les incitant ainsi à adapter la formulation, le ton et le contenu de leur message. Disponible uniquement pour les comptes Exchange Online et les comptes locaux tirant parti de l’authentification moderne hybride. S’il n’est pas configuré, le paramètre d’application par défaut a la valeur Activé.",
+ "allowFocusedInboxTitle": "Boîte de réception Prioritaire",
+ "allowFocusedInboxTooltip": "La boîte de réception Prioritaire divise votre boîte de réception en deux onglets : Prioritaire et Autres. Les e-mails les plus importants apparaissent sous l'onglet Prioritaire, tandis que les autres restent facilement accessibles, mais en retrait, sous l'onglet Autres. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Activé.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
+ "allowMailNotificationsTitle": "Notifications par e-mail",
+ "allowMailNotificationsTooltip": "Cette valeur spécifie si Outlook autorise les notifications de courrier. Pour désactiver ces notifications, affectez la valeur Non.",
+ "allowOrgDataOnWearablesTitle": "Données d'organisation sur les wearables",
+ "allowOrgDataOnWearablesTooltip": "Cette valeur spécifie si les données Outlook peuvent être synchronisées avec un wearable. Pour désactiver la synchronisation, affectez la valeur Non.",
+ "allowSaveContactsAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre de synchronisation des contacts.",
+ "allowSaveContactsTitle": "Enregistrer les contacts",
+ "allowSaveContactsTooltip": "L'enregistrement de contacts dans le carnet d'adresses natif de l'appareil mobile permet de lier les nouveaux appels et SMS aux contacts Outlook existants de l'utilisateur. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
+ "allowSmartReplyTitle": "Réponses suggérées",
+ "allowSmartReplyTooltip": "Quand vous ouvrez un message, Outlook peut suggérer des réponses sous le message. Si vous sélectionnez une réponse suggérée, vous pouvez modifier la réponse avant de l'envoyer. Quand il n'est pas configuré, le paramètre d'application par défaut a la valeur Activé.",
+ "allowUserChangeGeneralToolTip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
+ "allowUserChangeTitle": "Autoriser l'utilisateur à changer le paramètre",
+ "blockExternalImagesAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
+ "blockExternalImagesTitle": "Bloquer les images externes",
+ "blockExternalImagesTooltip": "Si le blocage des images externes est activé, l'application empêche le téléchargement des images hébergées sur Internet qui sont incorporées dans le corps du message. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
+ "disableAddinsTitle": "Autoriser les compléments",
+ "disableAddinsTooltip": "Par défaut, une stratégie de protection des applications permet aux utilisateurs d’utiliser des compléments tiers, mais peut être utilisée pour bloquer les compléments avec le paramètre « Synchroniser les données d’application gérées par la stratégie avec des applications natives ou des compléments ». La configuration de ce paramètre sur « Désactivé » bloque les compléments lorsque le paramètre de stratégie de protection des applications est défini sur Autorisé.",
+ "discoverFeedTitle": "Flux Discover",
+ "discoverFeedTooltip": "Le flux Discover couvre vos fichiers Office les plus fréquemment consultés. Par défaut, ce flux est activé quand Delve est activé pour l'utilisateur. Si l'option n'est pas configurée, le paramètre d'application par défaut est défini sur Activé.",
+ "enableSMIMETitle": "Activer S/MIME",
+ "enableSMIMETooltip": "Indiquez si les contrôles S/MIME sont activés au moment de la composition d’un e-mail.",
+ "encryptAllEmails": "Chiffrer tous les e-mails",
+ "encryptAllEmailsAllowUserChangeTooltip": "Indiquez si l’utilisateur est autorisé à changer le paramètre Chiffrer tous les e-mails.",
+ "encryptAllEmailsTooltip": "Spécifiez si tous les e-mails doivent être chiffrés. Le chiffrement convertit les données en texte chiffré que seul le destinataire visé peut lire.",
+ "ldapUrl": "URL LDAP",
+ "ldapUrlTooltip": "Il s’agit du nom d’hôte LDAP où les clients peuvent obtenir les clés de chiffrement publiques pour les destinataires des e-mails. Les e-mails seront chiffrés quand une clé sera disponible. Formats pris en charge :\r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre.",
+ "nativeCalendarSyncMAMOnlyTitle": "Autoriser la synchronisation du calendrier",
+ "nativeCalendarSyncMAMOnlyTooltip": "Par défaut, une stratégie de protection des applications permet la synchronisation du calendrier avec l’application de calendrier native, mais peut être utilisée pour bloquer la disponibilité de la synchronisation du calendrier. Ce paramètre fonctionne indépendamment du paramètre de stratégie de protection des applications et permet aux organisations de définir si la synchronisation du calendrier est disponible pour les comptes professionnels ou scolaires.",
+ "nativeCalendarSyncTitle": "Synchroniser les calendriers",
+ "nativeCalendarSyncTooltip": "Par défaut, une stratégie de protection des applications autorise la synchronisation du calendrier avec l’application de calendrier native, mais peut être utilisée pour bloquer la disponibilité de la synchronisation du calendrier avec le paramètre « Synchroniser les données d’application gérées par la stratégie avec les applications natives ou le complément ». La configuration de ce paramètre sur « Désactivé » bloque la synchronisation du calendrier lorsque le paramètre de stratégie de protection des applications est défini sur Autorisé.",
+ "playMyEmailsTitle": "Lire mes e-mails",
+ "playMyEmailsTooltip": "La fonctionnalité Lire mes e-mails n’est pas activée par défaut dans l’application, mais elle est promue aux utilisateurs éligibles via une bannière dans la boîte de réception. Quand la valeur est Désactivé, cette fonctionnalité n’est pas promue aux utilisateurs éligibles dans l’application. Les utilisateurs peuvent choisir d’activer manuellement Lire mes e-mails à partir de l’application, même si cette fonctionnalité est désactivée. Quand la valeur n’est pas configurée, le paramètre d’application par défaut est activé et la fonctionnalité est promue aux utilisateurs éligibles.",
+ "signAllEmails": "Signer tous les e-mails",
+ "signAllEmailsAllowUserChangeTooltip": "Indiquez si l’utilisateur est autorisé à changer le paramètre Signer tous les e-mails.",
+ "signAllEmailsTooltip": "Spécifiez si tous les e-mails doivent être signés. Une signature numérique vérifie l’authenticité de l’e-mail et garantit que le contenu n’est pas falsifié en transit.",
+ "syncAddressTitle": "Adresse",
+ "syncAddressTooltip": "Cette valeur spécifie si l'adresse du contact doit être synchronisée avec l'application de contacts native.",
+ "syncBirthdayTitle": "Anniversaire",
+ "syncBirthdayTooltip": "Cette valeur spécifie si la date de naissance du contact doit être synchronisée avec l'application de contacts native.",
+ "syncCompanyTitle": "Société",
+ "syncCompanyTooltip": "Cette valeur spécifie si le nom de l'entreprise du contact doit être synchronisé avec l'application de contacts native.",
+ "syncDepartmentTitle": "Service",
+ "syncDepartmentTooltip": "Cette valeur spécifie si le service du contact doit être synchronisé avec l'application de contacts native.",
+ "syncEmailAddressTitle": "Adresse e-mail",
+ "syncEmailAddressTooltip": "Cette valeur spécifie si l'adresse e-mail du contact doit être synchronisée avec l'application de contacts native.",
+ "syncInstantMessagingAddressTitle": "Adresse de messagerie instantanée",
+ "syncInstantMessagingAddressTooltip": "Cette valeur spécifie si l'adresse de messagerie instantanée du contact doit être synchronisée avec l'application de contacts native.",
+ "syncJobTitleTitle": "Poste",
+ "syncJobTitleTooltip": "Cette valeur spécifie si le poste du contact doit être synchronisé avec l'application de contacts native.",
+ "syncNicknameTitle": "Pseudonyme",
+ "syncNicknameTooltip": "Cette valeur spécifie si le pseudo du contact doit être synchronisé avec l'application de contacts native.",
+ "syncNotesTitle": "Notes",
+ "syncNotesTooltip": "Cette valeur spécifie si les notes du contact doivent être synchronisées avec l'application de contacts native.",
+ "syncPhoneHomeFaxNumberTitle": "Numéro de télécopie personnel",
+ "syncPhoneHomeFaxNumberTooltip": "Cette valeur spécifie si le numéro de télécopie personnel du contact doit être synchronisé avec l'application de contacts native.",
+ "syncPhoneHomeNumberTitle": "Numéro de téléphone personnel",
+ "syncPhoneHomeNumberTooltip": "Cette valeur spécifie si le numéro de téléphone personnel du contact doit être synchronisé avec l'application de contacts native.",
+ "syncPhoneMobileNumberTitle": "Numéro de téléphone mobile",
+ "syncPhoneMobileNumberTooltip": "Cette valeur spécifie si le numéro de téléphone mobile du contact doit être synchronisé avec l'application de contacts native.",
+ "syncPhoneOtherNumberTitle": "Autre numéro de téléphone",
+ "syncPhoneOtherNumberTooltip": "Cette valeur spécifie si le second numéro de téléphone du contact doit être synchronisé avec l'application de contacts native.",
+ "syncPhonePagerNumberTitle": "Numéro de récepteur de radiomessagerie",
+ "syncPhonePagerNumberTooltip": "Cette valeur spécifie si le numéro de récepteur de radiomessagerie du contact doit être synchronisé avec l'application de contacts native.",
+ "syncPhoneWorkFaxNumberTitle": "Numéro de télécopie professionnel",
+ "syncPhoneWorkFaxNumberTooltip": "Cette valeur spécifie si le numéro de télécopie professionnel du contact doit être synchronisé avec l'application de contacts native.",
+ "syncPhoneWorkNumberTitle": "Numéro de téléphone professionnel",
+ "syncPhoneWorkNumberTooltip": "Cette valeur spécifie si le numéro de téléphone professionnel du contact doit être synchronisé avec l'application de contacts native.",
+ "syncPrefixTitle": "Préfixe du nom",
+ "syncPrefixTooltip": "Cette valeur spécifie si le préfixe du nom du contact doit être synchronisé avec l'application de contacts native.",
+ "syncSuffixTitle": "Suffixe du nom",
+ "syncSuffixTooltip": "Cette valeur spécifie si le suffixe du nom du contact doit être synchronisé avec l'application de contacts native.",
+ "textPredictionsTitle": "Prédictions de texte",
+ "textPredictionsTooltip": "Outlook peut suggérer des mots et des expressions quand vous composez des messages. Quand Outlook propose une suggestion, faites un balayage pour l’accepter. Quand l’option n’est pas configurée, le paramètre de l’application par défaut est défini sur Activé.",
+ "themesEnabledTitle": "Thèmes activés",
+ "themesEnabledTooltip": "Spécifie si l’utilisateur est autorisé à utiliser un thème visuel personnalisé."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Utilisez ces paramètres pour savoir quels utilisateurs installent des applications dont l'utilisation n'est pas approuvée dans votre entreprise. Sélectionnez le type de liste d'applications restreintes :
\r\n Applications interdites - Liste des applications pour lesquelles vous voulez être informé quand elles sont installées par les utilisateurs. \r\n Applications approuvées - Liste des applications dont l'utilisation est approuvée dans votre entreprise. Quand les utilisateurs installent une application qui n'est pas dans cette liste, vous en êtes informé. \r\n ",
+ "androidZebraMxZebraMx": "Configurez les appareils Zebra en chargeant un profil MX au format XML.",
+ "iosDeviceFeaturesAirprint": "Utilisez ces paramètres pour configurer la connexion automatique des appareils iOS aux imprimantes compatibles AirPrint sur votre réseau. Vous devrez indiquer l'adresse IP et le chemin de ressource de vos imprimantes.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Configurez une extension d’application qui active l’authentification unique (SSO) pour les appareils exécutant iOS 13.0 ou version ultérieure.",
+ "iosDeviceFeaturesHomeScreenLayout": "Configurez la disposition du dock et des écrans d’accueil sur les appareils iOS. Certains appareils peuvent limiter le nombre d’éléments affichables.",
+ "iosDeviceFeaturesIOSWallpaper": "Affichez une image destinée à l’écran d’accueil et/ou l’écran de verrouillage des appareils iOS.\r\n Pour afficher une image unique dans chaque emplacement, créez un profil avec l’image de l’écran de verrouillage et un autre avec l’image de l’écran d’accueil.\r\n Affectez ensuite les deux profils à vos utilisateurs.\r\n \r\n
\r\n
Taille de fichier max. : 750 Ko
\r\n
Type de fichier : PNG, JPG ou JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Spécifiez les paramètres de notification pour les applications. Prend en charge iOS 9.3 et ultérieur.",
+ "iosDeviceFeaturesSharedDevice": "Spécifiez le texte facultatif affiché sur l'écran verrouillé. Il est pris en charge sur iOS 9.3 et ultérieur. En savoir plus",
+ "iosGeneralApplicationRestrictions": "Utilisez ces paramètres pour savoir quels utilisateurs installent des applications dont l'utilisation n'est pas approuvée dans votre entreprise. Sélectionnez le type de liste d'applications restreintes :
\r\n Applications interdites - Liste des applications pour lesquelles vous voulez être informé quand elles sont installées par les utilisateurs. \r\n Applications approuvées - Liste des applications dont l'utilisation est approuvée dans votre entreprise. Quand les utilisateurs installent une application qui n'est pas dans cette liste, vous en êtes informé. \r\n ",
+ "iosGeneralApplicationVisibility": "Utilisez la liste des applications affichées pour spécifier les applications iOS que l'utilisateur peut afficher ou lancer. Utilisez la liste des applications masquées pour spécifier les applications iOS que l'utilisateur ne peut pas afficher ou lancer.",
+ "iosGeneralAutonomousSingleAppMode": "Les applications que vous ajoutez à cette liste et que vous affectez à un appareil peuvent verrouiller l'appareil pour qu'il exécute uniquement cette application au démarrage, ou verrouiller l'appareil quand une action spécifique est exécutée (par exemple, un test). Quand l'action est terminée, ou si vous annulez la restriction, l'appareil retourne à l'état normal.",
+ "iosGeneralKiosk": "Le mode kiosque verrouille plusieurs paramètres sur un appareil ou spécifie l'application unique que les utilisateurs peuvent exécuter sur un appareil. Ce mode est utile dans certains environnements, par exemple, un magasin où vous présentez un appareil sur lequel doit s'exécuter uniquement une application de démonstration.",
+ "macDeviceFeaturesAirprint": "Utilisez ces paramètres pour configurer la connexion automatique des appareils macOS aux imprimantes compatibles AirPrint sur votre réseau. Vous aurez besoin de l'adresse IP et du chemin de ressource de vos imprimantes.",
+ "macDeviceFeaturesAssociatedDomains": "Configurez les domaines associés pour qu’ils partagent les données et les informations d’identification de connexion entre les applications et sites web de votre organisation. Ce profil peut être appliqué aux appareils qui exécutent macOS 10.15 ou version ultérieure.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Configurez une extension d’application qui active l’authentification unique (SSO) pour les appareils qui exécutent macOS 10.15 ou version ultérieure.",
+ "macDeviceFeaturesLoginItems": "Choisissez les applications, les fichiers et les dossiers à ouvrir quand les utilisateurs se connectent à leurs appareils. Si vous ne voulez pas que les utilisateurs changent le mode d'ouverture des applications sélectionnées, vous pouvez masquer l'application dans la configuration utilisateur.",
+ "macDeviceFeaturesLoginWindow": "Configurez l'apparence de l'écran de connexion macOS et les fonctions disponibles pour les utilisateurs avant et après leur connexion.",
+ "macExtensionsKernelExtensions": "Utilisez ces paramètres pour configurer la stratégie d'extension du noyau sur les appareils macOS exécutant la version 10.13.2 ou ultérieure.",
+ "macGeneralDomains": "Les e-mails reçus ou envoyés par l'utilisateur qui ne correspondent pas aux domaines que vous spécifiez ici sont marqués comme non approuvés.",
+ "windows10EndpointProtectionApplicationGuard": "Pendant l'utilisation de Microsoft Edge, Microsoft Defender Application Guard protège votre environnement des sites qui n'ont pas été définis comme approuvés par votre organisation. Quand des utilisateurs visitent des sites non listés dans les limites de votre réseau isolé, les sites sont ouverts dans une session de navigation virtuelle dans Hyper-V. Les sites approuvés sont définis par une limite réseau, qui peut être configurée dans Configuration de l'appareil. Notez que cette fonctionnalité est disponible seulement pour les appareils exécutant Windows 10,64 bits ou une version ultérieure.",
+ "windows10EndpointProtectionCredentialGuard": "L'activation de Credential Guard active les paramètres obligatoires suivants :\r\n \r\n
\r\n
Activer la sécurité basée sur la virtualisation : active la sécurité basée sur la virtualisation (VBS) au prochain redémarrage. La sécurité basée sur la virtualisation utilise l'hyperviseur Windows pour prendre en charge les services de sécurité.
\r\n \r\n
Démarrage sécurisé avec accès direct à la mémoire : active VBS avec le démarrage sécurisé et l'accès direct à la mémoire (DMA).
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Choisissez d'autres applications devant être auditées ou dont l'exécution peut être approuvée par Microsoft Defender Application Control. L'exécution des composants Windows et de toutes les applications du Windows Store est automatiquement approuvée.
\r\n Les applications ne sont pas bloquées quand elles s'exécutent en mode « Audit uniquement ». Le mode « Audit uniquement » journalise tous les événements dans les journaux du client local.\r\n ",
+ "windows10GeneralPrivacyPerApp": "Ajoutez des applications qui doivent avoir un comportement de confidentialité différent de celui défini dans « Confidentialité par défaut ».",
+ "windows10NetworkBoundaryNetworkBoundary": "La limite réseau correspond à la liste des ressources d'entreprise, comme le domaine hébergé dans le cloud et les plages d'adresses IP, accessibles aux ordinateurs du réseau d'entreprise. Définissez des limites réseau pour appliquer des stratégies visant à protéger les données dans ces emplacements.",
+ "windowsHealthMonitoring": "Configurez la stratégie de monitoring de l’intégrité de Windows.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone peut empêcher les utilisateurs d'installer ou de lancer les applications spécifiées dans la liste des applications interdites ou celles non spécifiées dans la liste des applications approuvées. Toutes les applications gérées doivent être ajoutées à la liste approuvée."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Échouer uniquement les applications de blocage sélectionnées dans la phase de technicien",
+ "apps": "applications",
+ "appsListName": "Liste des applications",
+ "blockingApps": "Blocage des applications",
+ "managedApps": "Applications gérées",
+ "noApps": "Aucune application",
+ "noAppsError": "Erreur de récupération des applications",
+ "selectApps": "Sélectionner les applications",
+ "selectedAppsCount": "{0} applications sélectionnées (100 max.)",
+ "useSelectedAppsAll": "Tout",
+ "useSelectedAppsSelected": "Sélectionné",
+ "useSelectedAppsToggleLabel": "Bloquer l’utilisation de l’appareil jusqu’à ce que les applications requises soient installées si elles sont attribuées à l’utilisateur/à l’appareil"
+ },
+ "Header": {
+ "application": "Application",
+ "publisher": "Éditeur",
+ "version": "Version"
+ },
+ "SearchBox": {
+ "ariaLabel": "Rechercher des applications",
+ "placeHolder": "Rechercher par nom ou éditeur"
+ },
+ "allowToUseToggle": "Autoriser les utilisateurs à se servir de l'appareil en cas d'erreur d'installation",
+ "blockToggle": "Bloquer l'utilisation de l'appareil tant que les profils et les applications ne sont pas tous installés",
+ "blockToolTip": "Si vous ajoutez Microsoft Word à cette liste, par exemple, les utilisateurs et appareils ciblés ne pourront pas quitter la page d'état d'inscription tant que Word n'est pas correctement installé.",
+ "collectLogToggle": "Activer la collecte de journaux et la page de diagnostic pour les utilisateurs finaux",
+ "create": "Créer le profil",
+ "customMessageTextBox": "Message d'erreur",
+ "customMessageToggle": "Afficher un message personnalisé lorsque la limite de temps ou l'erreur se produit",
+ "enableForAutopilotOnlyToggle": "Afficher uniquement la page sur les appareils approvisionnés par OOBE (out-of-box experience)",
+ "installQualityUpdatesToggle": "Installer les mises à jour de qualité Windows (pourrait redémarrer l'appareil) (aperçu)",
+ "progressToggle": "Afficher la progression de la configuration des applications et des profils",
+ "resetToggle": "Autoriser les utilisateurs à réinitialiser l'appareil en cas d'erreur d'installation",
+ "timeout": "Afficher une erreur quand la durée de l'installation est supérieure au nombre de minutes spécifié"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Propriété",
+ "rule": "Règle",
+ "ruleDetails": "Détails de la règle",
+ "value": "Valeur"
+ },
+ "assignIf": "Attribuer le profil si",
+ "deleteWarning": "Cette opération supprime la règle d'applicabilité sélectionnée",
+ "dontAssignIf": "Ne pas attribuer le profil si",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "et {0} de plus",
+ "instructions": "Spécifiez comment appliquer ce profil dans un groupe affecté. Intune applique seulement le profil aux appareils qui répondent aux critères combinés de ces règles.",
+ "maxText": "Max",
+ "minText": "Min",
+ "noActionRow": "Aucune règle d'applicabilité spécifiée",
+ "oSVersion": "Par ex., 1.2.3.4",
+ "toText": "jusqu'au",
+ "windows10Education": "Windows 10/11 Éducation",
+ "windows10EducationN": "Windows 10/11 Éducation N",
+ "windows10Enterprise": "Windows 10/11 Entreprise",
+ "windows10EnterpriseN": "Windows 10/11 Entreprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Famille",
+ "windows10HomeChina": "Windows 10 Famille Chine",
+ "windows10HomeN": "Windows 10/11 Famille N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Famille Unilingue",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Standard Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Entreprise",
+ "windows10OsEdition": "Édition du système d'exploitation",
+ "windows10OsVersion": "Version du système d'exploitation",
+ "windows10Professional": "Windows 10/11 Professionnel",
+ "windows10ProfessionalEducation": "Windows 10/11 Professionnel Éducation",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professionnel Éducation N",
+ "windows10ProfessionalN": "Windows 10 Professionnel N",
+ "windows10ProfessionalWorkstation": "Station de travail Windows 10/11 Professionnel",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professionnel Station de travail N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Autoriser l'utilisateur à changer le paramètre",
+ "tooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre."
+ },
+ "AllowWorkAccounts": {
+ "title": "Autoriser uniquement les comptes professionnels ou scolaires",
+ "tooltip": " Si ce paramètre est activé, les utilisateurs ne peuvent pas ajouter de comptes e-mail et de stockage personnels dans Outlook. Si un utilisateur ajoute un compte personnel dans Outlook, il est invité à le supprimer. S'il ne le supprime pas, l'ajout du compte professionnel ou scolaire échoue."
+ },
+ "BlockExternalImages": {
+ "title": "Bloquer les images externes",
+ "tooltip": "Si le blocage des images externes est activé, l'application empêche le téléchargement des images hébergées sur Internet qui sont incorporées dans le corps du message. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé"
+ },
+ "ConfigureEmail": {
+ "title": "Configurer les paramètres du compte e-mail"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "La signature d'application par défaut indique si l'application utilise « Obtenir Outlook pour Android » comme signature par défaut pendant la composition du message. Si le paramètre est désactivé, la signature par défaut n'est pas utilisée. Toutefois, les utilisateurs peuvent ajouter leur propre signature.\r\n\r\nS'il est défini sur Non configuré, le paramètre d'application par défaut est activé.",
+ "iOS": "La signature d'application par défaut indique si l'application utilise « Obtenir Outlook pour iOS » comme signature par défaut pendant la composition du message. Si le paramètre est désactivé, la signature par défaut n'est pas utilisée. Toutefois, les utilisateurs peuvent ajouter leur propre signature.\r\n\r\nS'il est défini sur Non configuré, le paramètre d'application par défaut est activé."
+ },
+ "title": "Signature d'application par défaut"
+ },
+ "OfficeFeedReplies": {
+ "title": "Flux Discover",
+ "tooltip": "Le flux Discover couvre vos fichiers Office les plus fréquemment consultés. Par défaut, ce flux est activé quand Delve est activé pour l'utilisateur. Si l'option n'est pas configurée, le paramètre d'application par défaut est défini sur Activé."
+ },
+ "OrganizeMailByThread": {
+ "title": "Organiser le courrier par conversation",
+ "tooltip": "Le comportement par défaut dans Outlook consiste à regrouper les conversations dans une vue par conversation. Si ce paramètre est désactivé, Outlook affiche les courriers individuellement et ne les regroupe pas par conversation."
+ },
+ "PlayMyEmails": {
+ "title": "Lire mes e-mails",
+ "tooltip": "La fonctionnalité Lire mes e-mails n’est pas activée par défaut dans l’application, mais elle est promue aux utilisateurs éligibles via une bannière dans la boîte de réception. Quand la valeur est Désactivé, cette fonctionnalité n’est pas promue aux utilisateurs éligibles dans l’application. Les utilisateurs peuvent choisir d’activer manuellement Lire mes e-mails à partir de l’application, même si cette fonctionnalité est désactivée. Quand la valeur n’est pas configurée, le paramètre d’application par défaut est activé et la fonctionnalité est promue aux utilisateurs éligibles."
+ },
+ "SuggestedReplies": {
+ "title": "Réponses suggérées",
+ "tooltip": "Quand vous ouvrez un message, Outlook peut suggérer des réponses sous le message. Si vous sélectionnez une réponse suggérée, vous pouvez la modifier avant de l'envoyer."
+ },
+ "SyncCalendars": {
+ "title": "Synchroniser les calendriers",
+ "tooltip": "Spécifie si les utilisateurs peuvent synchroniser leur calendrier Outlook avec la base de données et l’application du calendrier natif."
+ },
+ "TextPredictions": {
+ "title": "Prédictions de texte",
+ "tooltip": "Outlook peut suggérer des mots et des expressions quand vous composez des messages. Quand Outlook propose une suggestion, faites un balayage pour l’accepter. Quand l’option n’est pas configurée, le paramètre de l’application par défaut est défini sur Activé."
+ },
+ "ThemesEnabled": {
+ "title": "Thèmes activés",
+ "tooltip": "Spécifie si l’utilisateur est autorisé à utiliser un thème visuel personnalisé."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "Appareils ChromeOS"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Contacts de l’administrateur",
+ "appPackaging": "Empaquetage d’applications",
+ "autopatchGroups": "Groupes de mise en pause automatique",
+ "devices": "Appareils",
+ "featureEnablement": "Activer la fonctionnalité",
+ "feedback": "Commentaires",
+ "gettingStarted": "Mise en route",
+ "messages": "Messages",
+ "onlineResources": "Ressources en ligne",
+ "policyHealth": "Politique de santé",
+ "policyHealthPreview": "Intégrité de la stratégie (préversion)",
+ "releaseManagement": "Gestion des mises en production",
+ "serviceRequests": "Demandes de service",
+ "settings": "Paramètres",
+ "supportRequests": "Demandes de support",
+ "tenantEnrollment": "Inscription des locataires",
+ "tenantManagement": "Gestion client"
+ },
+ "actions": "Actions en cas de non-conformité",
+ "advancedExchangeSettings": "Paramètres Exchange Online",
+ "advancedThreatProtection": "Microsoft Defender pour point de terminaison",
+ "allApps": "Toutes les applications",
+ "allDevices": "Tous les appareils",
+ "androidFotaDeployments": "Déploiements d’Android FOTA",
+ "appBundles": "Offres groupées d’applications",
+ "appCategories": "Catégories d'applications",
+ "appConfigPolicies": "Stratégies de configuration des applications",
+ "appConfigurationStatus": "État de la configuration de l'application",
+ "appInstallStatus": "État de l'installation de l'application",
+ "appLicences": "Licences d'application",
+ "appProtectionPolicies": "Stratégies de protection des applications",
+ "appProtectionStatus": "État de la protection des applications",
+ "appSelectiveWipe": "Réinitialisation sélective des applications",
+ "appleVppTokens": "Jetons VPP Apple",
+ "apps": "Applications",
+ "assign": "Affectations",
+ "assignedPermissions": "Autorisations attribuées",
+ "assignedRoles": "Rôles affectés",
+ "autopilotDeploymentReport": "Déploiements AutoPilot (préversion)",
+ "autopilotDeploymentReportV2": "Déploiements de pilote automatique 2.0 (préversion)",
+ "brandingAndCustomization": "Personnalisation",
+ "cartProfiles": "Profils de panier",
+ "certificateConnectors": "Connecteurs de certificat",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Appareils attachés au cloud (préversion)",
+ "cloudPcActions": "Actions de PC cloud (préversion)",
+ "cloudPcMaintenanceWindows": "Fenêtres de maintenance cloud PC (préversion)",
+ "compliancePolicies": "Stratégies de conformité",
+ "complianceScriptManagement": "Scripts",
+ "complianceScriptManagementPreview": "Scripts (préversion)",
+ "complianceSettings": "Paramètres de stratégie de conformité",
+ "conditionStatements": "Énoncés des conditions",
+ "conditions": "Emplacements",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Profils de configuration",
+ "configurationScripts": "Scripts de configuration",
+ "connectorsAndTokens": "Connecteurs et jetons",
+ "corporateDeviceIdentifiers": "Identificateurs d'appareil d'entreprise",
+ "customAttributes": "Attributs personnalisés",
+ "customAttributesMacOS": "Attributs personnalisés pour macOS",
+ "customNotifications": "Notifications personnalisées",
+ "deploymentSettings": "Paramètres de déploiement",
+ "derivedCredentials": "Informations d’identification dérivées",
+ "deviceActions": "Actions de l'appareil",
+ "deviceCategories": "Catégories d'appareils",
+ "deviceCleanUp": "Règles de nettoyage d'appareil",
+ "deviceEnrollmentManagers": "Gestionnaires d'inscription d'appareil",
+ "deviceExecutionStatus": "État de l'appareil",
+ "deviceLimitEnrollmentRestrictions": "Restriction du nombre limite d’appareils lors de l’inscription",
+ "deviceTypeEnrollmentRestrictions": "Restriction du type de plateforme d’appareil lors de l’inscription",
+ "devices": "Appareils",
+ "discoveredApps": "Applications découvertes",
+ "edgePolicies": "Stratégies pour Microsoft Edge",
+ "embeddedSIM": "Profils mobiles eSIM (préversion)",
+ "enrollDevices": "Inscrire des appareils",
+ "enrollmentFailures": "Échecs d'inscription",
+ "enrollmentNotifications": "Notifications d’inscription (préversion)",
+ "enrollmentRestrictions": "Restrictions d'inscription",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Connecteurs de services Exchange",
+ "failuresForCumulativeQualityUpdates": "Échecs de mise à jour de qualité cumulative Windows",
+ "failuresForDriverUpdates": "Échecs de mise à jour du pilote Windows",
+ "failuresForFeatureUpdates": "Échec de la mise à jour des fonctionnalités",
+ "failuresForQualityUpdates": "Échecs de la mise à jour accélérée de Windows",
+ "featureFlighting": "Version d'évaluation des fonctionnalités",
+ "featureUpdateDeployments": "Mises à jour des fonctionnalités pour Windows 10 et versions ultérieures",
+ "flighting": "Distribution de version d'évaluation",
+ "fotaUpdate": "Mise à jour de microprogramme en l’air",
+ "groupPolicy": "Modèles d'administration",
+ "groupPolicyAnalytics": "Analytique de la stratégie de groupe",
+ "helpSupport": "Aide et support",
+ "helpSupportReplacement": "Aide et support ({0})",
+ "iOSAppProvisioning": "Profils de provisionnement d'application iOS",
+ "incompleteUserEnrollments": "Inscriptions d'utilisateur incomplètes",
+ "iosUpdates": "Mises à jour iOS/iPadOS",
+ "legacyPcManagement": "Gestion des PC existants",
+ "macOSSoftwareUpdate": "Mises à jour macOS",
+ "macOSSoftwareUpdateAccountSummaries": "État d'installation des appareils macOS",
+ "macOSSoftwareUpdateCategorySummaries": "Récapitulatif des mises à jour logicielles",
+ "macOSSoftwareUpdateStateSummaries": "modifications",
+ "managedGooglePlay": "Google Play géré",
+ "msfb": "Microsoft Store pour Entreprises",
+ "myPermissions": "Mes autorisations",
+ "notifications": "Notifications",
+ "officeApps": "Applications Office",
+ "officeProPlusPolicies": "Stratégies pour les applications Office",
+ "onPremise": "Local",
+ "onPremisesConnector": "Connecteur local Exchange ActiveSync",
+ "onPremisesDeviceAccess": "Appareils Exchange ActiveSync",
+ "onPremisesManageAccess": "Accès à Exchange sur site",
+ "outOfDateIosDevices": "Échecs d'installation pour les appareils iOS",
+ "overview": "Vue d'ensemble",
+ "partnerDeviceManagement": "Gestion des appareils partenaires",
+ "perUpdateRingDeploymentState": "Par état d'anneau de déploiement de mises à jour",
+ "permissions": "Autorisations",
+ "platformApps": "{0} applications",
+ "platformDevices": "{0} appareils",
+ "platformEnrollment": "Inscription {0}",
+ "policies": "Stratégies",
+ "profiles": "Profils",
+ "properties": "Propriétés",
+ "reports": "Rapports",
+ "retireNoncompliantDevices": "Mettre hors service les appareils non conformes",
+ "retireNoncompliantDevicesPreview": "Mettre hors service les appareils non conformes (aperçu)",
+ "role": "Rôle",
+ "scriptManagement": "Scripts",
+ "securityBaselines": "Bases de référence de sécurité",
+ "serviceToServiceConnector": "Connecteur Exchange Online",
+ "servicenowConnector": "Connecteur ServiceNow",
+ "shellScripts": "Scripts shell",
+ "teamViewerConnector": "Connecteur TeamViewer",
+ "telecomeExpenseManagement": "Gestion des dépenses de télécommunication",
+ "tenantAdmin": "Administrateur de locataire",
+ "tenantAdministration": "Administration de locataire",
+ "termsAndConditions": "Conditions générales",
+ "titles": "Titres",
+ "troubleshoot": "Résoudre des problèmes",
+ "troubleshootSupport": "Dépannage + support",
+ "user": "Utilisateur",
+ "userExecutionStatus": "État de l'utilisateur",
+ "wdacSupplementalPolicies": "Stratégies supplémentaires en mode S",
+ "win32CatalogUpdateApp": "Mises à jour pour les applications de gestion des applications d’entreprise",
+ "win32CatalogUpdateAppInPreview": "Mises à jour pour les applications de catalogue Windows (Win32) (préversion)",
+ "win32CatalogUpdateAppPreviewTitle": "Applications du catalogue d’applications d’entreprise avec mises à jour (préversion)",
+ "win32CatalogUpdateAppTitle": "Applications du catalogue d’applications d’entreprise avec mises à jour",
+ "windows10DriverUpdate": "Mises à jour des pilotes pour Windows 10 et versions ultérieures",
+ "windows10QualityUpdate": "Mises à jour qualité pour Windows 10 et versions ultérieures",
+ "windows10UpdateRings": "Boucles de mise à jour pour Windows 10 et versions ultérieures",
+ "windows10XPolicyFailures": "Échecs de stratégie Windows 10X",
+ "windows365PartnerConnector": "Connecteurs partenaires Windows 365",
+ "windowsDiagnosticData": "Données Windows",
+ "windowsEnterpriseCertificate": "Certificat d'entreprise Windows",
+ "windowsManagement": "Scripts",
+ "windowsSideLoadingKeys": "Clés de chargement indépendant Windows",
+ "windowsSymantecCertificate": "Certificat Windows DigiCert",
+ "windowsThreatReport": "État de l'agent de menace"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Autoriser les utilisateurs à ouvrir des données à partir des services sélectionnés",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Sélectionner le nombre de valeurs de code secret précédentes à maintenir"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "Une action de blocage est obligatoire pour toutes les stratégies de conformité.",
- "graceperiod": "Planification (jours après la non-conformité)",
- "graceperiodInfo": "Spécifier le nombre de jours de non-conformité après lesquels cette action doit être déclenchée pour l'appareil de l'utilisateur",
- "subtitle": "Spécifier les paramètres d'action",
- "title": "Paramètres d'action"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Mettre à la disposition des utilisateurs en tant que mise à jour facultative",
+ "optionalValue": "Facultatif",
+ "required": "Mettre à la disposition des utilisateurs en tant que mise à jour obligatoire",
+ "requiredValue": "Obligatoire"
},
- "List": {
- "gracePeriodDay": "{0} jour après la non-conformité",
- "gracePeriodDays": "{0} jours après la non-conformité",
- "gracePeriodHour": "{0} heure après la non-conformité",
- "gracePeriodHours": "{0} heures après la non-conformité",
- "gracePeriodMinute": "{0} minute après la non-conformité",
- "gracePeriodMinutes": "{0} minutes après la non-conformité",
- "immediately": "Immédiatement",
- "schedule": "Planification",
- "scheduleInfoBalloon": "Jours après la non-conformité",
- "subtitle": "Spécifier la séquence d'actions sur les appareils non conformes",
- "title": "Actions"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Application système Android Enterprise",
+ "androidForWorkApp": "Application du store Google Play géré",
+ "androidLobApp": "Application métier Android",
+ "androidStoreApp": "Application de l'Android Store",
+ "builtInAndroid": "Application Android intégrée",
+ "builtInApp": "Application intégrée",
+ "builtInIos": "Application iOS intégrée",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "Application métier iOS",
+ "iosStoreApp": "Application de l'App Store iOS",
+ "iosVppApp": "Application du programme d'achat en volume (VPP) iOS",
+ "lineOfBusinessApp": "Application métier",
+ "macOSDmgApp": "macOS app (.DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Application métier macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Applications Microsoft 365 (macOS)",
+ "macOSPkgApp": "Application macOS (PKG)",
+ "macOSWebClip": "Clip web macOS",
+ "macOsVppApp": "Application du programme d'achat en volume macOS",
+ "managedAndroidLobApp": "Application métier Android gérée",
+ "managedAndroidStoreApp": "Application de l'Android Store gérée",
+ "managedGooglePlayApp": "Application du store Google Play géré",
+ "managedGooglePlayPrivateApp": "Application privée Google Play géré",
+ "managedGooglePlayWebApp": "Lien web à Google Play géré",
+ "managedIosLobApp": "Application métier iOS gérée",
+ "managedIosStoreApp": "Application de l'App Store iOS gérée",
+ "microsoftStoreForBusinessApp": "Application du Microsoft Store pour Entreprises",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store pour Entreprises",
+ "officeSuiteApp": "Applications Microsoft 365 (Windows 10 et versions ultérieures)",
+ "webApp": "Lien web",
+ "windowsAppXLobApp": "Application métier appx Windows",
+ "windowsClassicApp": "Application Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 et versions ultérieures)",
+ "windowsMobileMsiLobApp": "Application métier MSI Windows",
+ "windowsPhone81AppXBundleLobApp": "Application métier appx Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "Application métier appx Windows Phone 8.1",
+ "windowsPhone81StoreApp": "Application du Windows Phone 8.1 Store",
+ "windowsPhoneXapLobApp": "Application métier XAP Windows Phone",
+ "windowsStoreApp": "Application Microsoft Store (héritée)",
+ "windowsUniversalAppXLobApp": "Application métier appx Windows Universal",
+ "windowsUniversalLobApp": "Application métier Windows universelle",
+ "windowsWebApp": "Lien web Windows"
+ },
+ "PolicySet": {
+ "appManagement": "Gestion des applications",
+ "assignments": "Attributions",
+ "basics": "De base",
+ "deviceEnrollment": "Inscription de l'appareil",
+ "deviceManagement": "Gestion des appareils",
+ "scopeTags": "Balises d'étendue",
+ "appConfigurationTitle": "Stratégies de configuration des applications",
+ "appProtectionTitle": "Stratégies de protection des applications",
+ "appTitle": "Applications",
+ "iOSAppProvisioningTitle": "Profils de provisionnement d'application iOS",
+ "deviceLimitRestrictionTitle": "Restrictions de limite d'appareils",
+ "deviceTypeRestrictionTitle": "Restrictions de type d'appareil",
+ "enrollmentStatusSettingTitle": "Pages d'état d'inscription",
+ "windowsAutopilotDeploymentProfileTitle": "Profils Windows AutoPilot Deployment",
+ "deviceComplianceTitle": "Stratégies de conformité d'appareil",
+ "deviceConfigurationTitle": "Profils de configuration d'appareil",
+ "powershellScriptTitle": "Scripts PowerShell"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "L'installation de l'application peut forcer le redémarrage de l'appareil",
+ "basedOnReturnCode": "Déterminer le comportement en fonction des codes de retour",
+ "force": "Intune force le redémarrage obligatoire de l'appareil",
+ "suppress": "Aucune action spécifique"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Temps d’installation requis (minutes)",
+ "maxRunTimeInMinutesToolTip": "Nombre de minutes pendant lesquelles le système attend la fin du programme d’installation. La valeur par défaut est 60 minutes."
+ },
+ "RunAsAccountOptions": {
+ "system": "Système",
+ "user": "Utilisateur"
+ },
+ "availableUninstall": "Autoriser la désinstallation disponible",
+ "availableUninstallTooltip": "Sélectionnez « Oui » pour fournir l’option de désinstallation de cette application aux utilisateurs du Portail d'entreprise. Sélectionnez « Non » pour empêcher les utilisateurs de désinstaller l’application du Portail d'entreprise.",
+ "bladeTitle": "Programme",
+ "deviceRestartBehavior": "Comportement de redémarrage du périphérique",
+ "deviceRestartBehaviorTooltip": "Sélectionnez le comportement de redémarrage de l'appareil une fois l'application installée. Sélectionnez « Déterminer le comportement en fonction des codes de retour » pour redémarrer l'appareil en fonction des paramètres de configuration des codes de retour. Sélectionnez « Aucune action spécifique » pour supprimer les redémarrages de l'appareil durant l'installation des applications MSI. Sélectionnez « L'installation de l'application peut forcer le redémarrage de l'appareil » pour permettre l'installation de l'application sans supprimer les redémarrages. Sélectionnez « Intune force le redémarrage obligatoire de l'appareil » pour toujours redémarrer l'appareil après l'installation de l'application.",
+ "header": "Spécifiez les commandes pour installer et désinstaller cette application :",
+ "installCommand": "Commande d'installation",
+ "installCommandMaxLengthErrorMessage": "La commande d’installation ne peut pas dépasser la longueur maximale autorisée de 1024 caractères.",
+ "installCommandTooltip": "Ligne de commande d'installation complète pour installer cette application.",
+ "runAs32Bit": "Exécuter les commandes d'installation et de désinstallation dans un processus 32 bits sur des clients 64 bits",
+ "runAs32BitTooltip": "Sélectionnez 'Oui' pour installer et désinstaller l'application dans un processus 32 bits sur des clients 64 bits. Sélectionnez 'Non' (par défaut) pour installer et désinstaller l'application dans un processus 64 bits sur des clients 64 bits. Les clients 32 bits utilisent toujours un processus 32 bits.",
+ "runAsAccount": "Comportement à l'installation",
+ "runAsAccountTooltip": "Sélectionnez Système pour installer cette application pour tous les utilisateurs (si elle est prise en charge). Sélectionnez Utilisateur pour l'installer pour l'utilisateur connecté sur l'appareil. Pour les applications MSI à double objectif, tout changement empêche l'exécution des mises à jour et des désinstallations jusqu'à la restauration de la valeur appliquée à l'appareil au moment de l'installation d'origine.",
+ "selectorLabel": "Programme",
+ "uninstallCommand": "Commande de désinstallation",
+ "uninstallCommandTooltip": "Ligne de commande de désinstallation complète pour désinstaller cette application."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Autres",
- "additionalRecipients": "Destinataires supplémentaires (via e-mail)",
- "additionalRecipientsBladeTitle": "Sélectionner des destinataires supplémentaires",
- "emailAddressPrompt": "Entrer des adresses e-mail (séparées par des virgules)",
- "invalidEmail": "Adresse e-mail non valide",
- "messageTemplate": "Modèle de message",
- "noneSelected": "Aucun utilisateur sélectionné",
- "notSelected": "Non sélectionné",
- "numSelected": "{0} sélectionné(s)",
- "selected": "Sélectionnée"
- },
- "block": "Marquer l'appareil comme non conforme",
- "lockDevice": "Verrouiller l'appareil (action locale)",
- "lockDeviceWithPasscode": "Verrouiller l'appareil (action locale)",
- "noAction": "Aucune action",
- "noActionRow": "Aucune action, sélectionnez « Ajouter » pour ajouter une action",
- "pushNotification": "Envoyer des notifications Push à l'utilisateur final",
- "remoteLock": "Verrouiller à distance l'appareil non conforme",
- "removeSourceAccessProfile": "Supprimer le profil d'accès source",
- "retire": "Ajouter un appareil à la liste des mises hors service",
- "wipe": "Réinitialiser",
- "emailNotification": "Envoyer un e-mail à l'utilisateur final"
- },
- "InstallIntent": {
- "available": "Disponible pour les appareils inscrits",
- "availableWithoutEnrollment": "Disponible avec ou sans inscription",
- "required": "Obligatoire",
- "uninstall": "Désinstaller"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Créer un script personnalisé",
- "edit": "Modifier le script personnalisé"
- },
- "basicInfo": "Créez un package de script personnalisé à partir des scripts de détection et de correction que vous avez écrits.",
- "customScriptCapitalized": "Script personnalisé",
- "customScriptLowercase": "script personnalisé",
- "detectionScript": "Script de détection"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Autoriser l'utilisation de lettres minuscules dans le code PIN",
+ "notAllow": "Ne pas autoriser l'utilisation de lettres minuscules dans le code PIN",
+ "requireAtLeastOne": "Exiger l'utilisation d'au moins une lettre minuscule dans le code PIN"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Autoriser l'utilisation de caractères spéciaux dans le code PIN",
+ "notAllow": "Ne pas autoriser l'utilisation de caractères spéciaux dans le code PIN",
+ "requireAtLeastOne": "Exiger l'utilisation d'au moins un caractère spécial dans le code PIN"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Autoriser l'utilisation de lettres majuscules dans le code PIN",
+ "notAllow": "Ne pas autoriser l'utilisation de lettres majuscules dans le code PIN",
+ "requireAtLeastOne": "Exiger l'utilisation d'au moins une lettre majuscule dans le code PIN"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Créer",
+ "createNewResourceAccountInfo": "
\r\nCréez un compte de ressource pendant l'inscription. Le compte de ressource est ajouté immédiatement aux tableaux de comptes de ressource, mais n'est pas actif tant que l'appareil n'est pas inscrit et que l'abonnement Surface Hub n'est pas vérifié. En savoir plus sur les comptes de ressource
\r\n ",
+ "createNewResourceTitle": "Créer un compte de ressource",
+ "deviceNameInvalid": "Format du nom d'appareil non valide",
+ "deviceNameRequired": "Nom de l'appareil obligatoire",
+ "editResourceAccountLabel": "Modifier",
+ "selectExistingCommandMenu": "Sélectionner"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "Les noms doivent avoir 15 caractères maximum et peuvent contenir des lettres (a-z, A-Z), des chiffres (0-9) et des traits d'union. Ils ne doivent pas contenir uniquement des chiffres et ne doivent pas contenir d'espace."
+ },
+ "Header": {
+ "addressableUserName": "Nom convivial",
+ "azureADDevice": "Appareil Microsoft Entra associé",
+ "batch": "Étiquette de groupe",
+ "dateAssigned": "Date d'attribution",
+ "deviceAccountPwd": "Mot de passe du compte de l’appareil",
+ "deviceAccountUpn": "Compte d’appareil",
+ "deviceDisplayName": "Nom de l’appareil",
+ "deviceFriendlyName": "Nom convivial de l'appareil",
+ "deviceName": "Nom de l'appareil",
+ "deviceUseType": "Type d'utilisation de l'appareil",
+ "enrollmentState": "État de l'inscription",
+ "intuneDevice": "Appareil Intune associé",
+ "lastContacted": "Dernier contact",
+ "make": "Fabricant",
+ "model": "Modèle",
+ "profile": "Profil affecté",
+ "profileStatus": "État du profil",
+ "purchaseOrderId": "Bon de commande",
+ "resourceAccount": "Compte de ressource",
+ "serialNumber": "Numéro de série",
+ "userPrincipalName": "Utilisateur"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Un nom convivial est requis",
+ "pwdRequired": "Un mot de passe est requis",
+ "pwdValidFormat": "Impossible de mettre à jour le mot de passe. La valeur fournie pour le nouveau mot de passe ne répond pas aux exigences de longueur ou de complexité du domaine.",
+ "upnRequired": "Un compte d’appareil est requis",
+ "upnValidFormat": "Les valeurs peuvent contenir des lettres (a-z, A-Z), des chiffres (0-9) et des traits d’union. Les valeurs ne peuvent pas inclure d’espace vide."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Réunion et présentation",
+ "teamCollaboration": "Collaboration en équipe"
+ },
+ "Devices": {
+ "featureDescription": "Windows Autopilot vous permet de personnaliser l'expérience OOBE pour vos utilisateurs.",
+ "importErrorStatus": "Certains appareils n'ont pas été importés. Cliquez ici pour plus d'informations.",
+ "importPendingStatus": "Importation en cours. Temps écoulé : {0} min. Ce processus peut prendre jusqu'à {1} min."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Jointure hybride Microsoft Entra",
+ "activeDirectoryADLabel": "Jointure Microsoft Entra hybride avec Autopilot",
+ "azureAD": "Joint à Microsoft Entra",
+ "unknownType": "Type inconnu"
+ },
+ "Filter": {
+ "enrollmentState": "État",
+ "profile": "État du profil"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "Le nom convivial d'utilisateur ne peut pas être vide."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Créez un modèle de nommage pour ajouter des noms à vos appareils pendant l'inscription.",
+ "label": "Appliquer le modèle de nom d'appareil"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "Pour le type de profils de déploiement Autopilot avec jointure à Microsoft Entra hybride, les appareils sont nommés en utilisant les paramètres spécifiés dans la configuration de jointure de domaine."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MyCompany-%RAND:4%",
+ "label": "Entrer un nom",
+ "noDisallowedChars": "Le nom doit contenir uniquement des caractères alphanumériques, des traits d'union, %SERIAL% ou %RAND:x%",
+ "serialLength": "Impossible d'utiliser plus de 7 caractères avec %SERIAL%",
+ "validateLessThan15Chars": "Le nom doit avoir 15 caractères maximum",
+ "validateNoSpaces": "Les noms d'ordinateur ne peuvent pas contenir d'espace",
+ "validateNotAllNumbers": "Le nom doit également contenir des lettres et/ou des traits d'union",
+ "validateNotEmpty": "Le nom ne peut pas être vide",
+ "validateOnlyOneMacro": "Le nom doit contenir uniquement une %SERIAL% ou une %RAND:x%"
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Créez un nom unique pour vos appareils. Les noms doivent avoir 15 caractères maximum et peuvent contenir des lettres (a-z, A-Z), des chiffres (0-9) et des traits d'union. Ils ne doivent pas contenir uniquement des chiffres. Les noms ne peuvent pas contenir d'espace vide. Utilisez la macro %SERIAL% pour ajouter un numéro de série propre au matériel. Vous pouvez également utiliser la macro %RAND:x% pour ajouter une chaîne aléatoire de chiffres, où x est égal au nombre de chiffres à ajouter."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Autoriser l'exécution d'OOBE sans authentification utilisateur pour inscrire l'appareil et provisionner tous les paramètres et applications du contexte système en appuyant 5 fois sur la touche Windows. Les applications et paramètres du contexte utilisateur seront remis au moment de la connexion de l'utilisateur.",
+ "label": "Autoriser le déploiement préconfiguré"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Le flux AutoPilot Microsoft Entra hybride joint se poursuivra même s’il n’établit pas de connectivité au contrôleur de domaine lors de l’installation de OOBE.",
+ "label": "Ignorer la vérification de connectivité AD"
+ },
+ "accountType": "Type de compte d'utilisateur",
+ "accountTypeInfo": "Spécifie si les utilisateurs sont des administrateurs ou des utilisateurs standard sur l’appareil. Notez que ce paramètre ne s’applique pas aux comptes d’administrateur général ou d’administrateur de la société. Ces comptes ne peuvent pas être des utilisateurs standard, car ils ont accès à toutes les fonctionnalités d’administration dans Microsoft Entra ID.",
+ "configOOBEInfo": "
\r\nConfigurer l'expérience par défaut (out-of-box) pour vos appareils Autopilot\r\n
",
+ "configureDevice": "Mode de déploiement",
+ "configureDeviceHintForSurfaceHub2": "Autopilot prend uniquement en charge le mode de déploiement automatique pour Surface Hub 2. Ce mode n'associe pas l'utilisateur à l'appareil inscrit et n'a donc pas besoin des informations d'identification de l'utilisateur.",
+ "configureDeviceHintForWindowsPC": "
\r\n Le mode de déploiement contrôle si un utilisateur doit fournir des informations d'identification pour provisionner l'appareil.\r\n
\r\n
\r\n
\r\n Géré par l'utilisateur : L'appareil est associé à l'utilisateur qui effectue l'inscription et doit fournir ses informations d'identification pour provisionner l'appareil\r\n
\r\n
\r\n Auto-déploiement (préversion) : L'appareil n'est pas associé à l'utilisateur qui effectue l'inscription et les informations d'identification de l'utilisateur ne sont pas nécessaires pour provisionner l'appareil\r\n
\r\n
",
+ "createSurfaceHub2Info": "Configurez les paramètres d'inscription Autopilot pour vos appareils Surface Hub 2. Par défaut, Autopilot permet d'ignorer l'authentification utilisateur pendant l'expérience OOBE. Découvrez-en plus sur Windows Autopilot pour Surface Hub 2.",
+ "createWindowsPCInfo": "\r\n
\r\nLes options suivantes sont automatiquement activées pour les appareils Autopilot en mode de déploiement automatique :\r\n
\r\n
\r\n
\r\n Ignorer la sélection d'utilisation professionnelle ou personnelle\r\n
\r\n
\r\n Ignorer l'inscription OEM et la configuration de OneDrive\r\n
\r\n
\r\n Ignorer l'authentification de l'utilisateur dans OOBE\r\n
\r\n
",
+ "endUserDevice": "Géré par l'utilisateur",
+ "hideEscapeLink": "Masquer les options de changement de compte",
+ "hideEscapeLinkInfo": "Les options permettant de changer de compte et de recommencer avec un autre compte apparaissent, respectivement, pendant l’installation initiale de l’appareil dans la page de connexion de l’entreprise et dans la page des erreurs de domaine. Pour masquer ces options, vous devez configurer la personnalisation de l’entreprise dans Microsoft Entra ID (nécessite Windows 10, 1809 ou version ultérieure ou Windows 11).",
+ "info": "Les paramètres du profil AutoPilot définissent l'expérience OOBE (Out-of-Box Experience) que les utilisateurs voient au premier démarrage de Windows. ",
+ "language": "Langue (région)",
+ "languageInfo": "Spécifiez la langue et la région à utiliser.",
+ "licenseAgreement": "Termes du contrat de licence logiciel Microsoft",
+ "licenseAgreementInfo": "Indiquez si le CLUF est présenté aux utilisateurs.",
+ "plugAndForgetDevice": "Déploiement automatique",
+ "privacySettingWarning": "La valeur par défaut pour la collecte des données de diagnostic a changé pour les appareils exécutant Windows 10, version 1903 ou ultérieure ou Windows 11. ",
+ "privacySettings": "Paramètres de confidentialité",
+ "privacySettingsInfo": "Indiquez si les paramètres de confidentialité sont présentés aux utilisateurs.",
+ "showCortanaConfigurationPage": "Configuration de Cortana",
+ "showCortanaConfigurationPageInfo": "L'option Afficher active l'introduction de la configuration de Cortana au démarrage.",
+ "skipEULAWarning": "Informations importantes sur le masquage des termes du contrat de licence",
+ "skipKeyboardSelection": "Configurer automatiquement le clavier",
+ "skipKeyboardSelectionInfo": "Si la valeur est true, ignorez la page de sélection du clavier quand la langue est définie.",
+ "subtitle": "Profils AutoPilot",
+ "title": "OOBE (Out-Of-Box Experience)",
+ "useOSDefaultLanguage": "Système d'exploitation par défaut",
+ "userSelect": "Sélection de l’utilisateur"
},
+ "Sync": {
+ "lastRequestedLabel": "Dernière demande de synchronisation",
+ "lastSuccessfulLabel": "Dernière synchronisation effectuée",
+ "syncInProgress": "La synchronisation est en cours. Revenez un peu plus tard.",
+ "syncInitiated": "Synchronisation des paramètres AutoPilot lancée.",
+ "syncSettingsTitle": "Synchroniser les paramètres AutoPilot"
+ },
+ "Title": {
+ "devices": "Appareils Windows AutoPilot"
+ },
+ "Tooltips": {
+ "addressableUserName": "Nom de bienvenue affiché lors de l'installation de l'appareil.",
+ "azureADDevice": "Accédez aux détails de l'appareil associé. N/A signifie qu'aucun appareil n'est associé.",
+ "batch": "Attribut de chaîne qui permet d’identifier un groupe d’appareils. Le champ de balise de groupe de Intune est associé à l’attribut OrderID sur les appareils Microsoft Entra.",
+ "dateAssigned": "Horodatage de l'affectation du profil à l'appareil.",
+ "deviceAccountPwd": "Mot de passe du compte d’appareil pour les appareils Surface Hub. En cas d’entrée, renseignez également le compte d’appareil et le nom convivial.",
+ "deviceAccountUpn": "Adresse e-mail du compte d’appareil pour les appareils Surface Hub. En cas d’entrée, renseignez également le mot de passe du compte d’appareil et le nom convivial.",
+ "deviceDisplayName": "Configurez un nom unique pour un appareil. Ce nom sera ignoré dans les déploiements avec jointure Microsoft Entra hybride. Le nom de l’appareil est toujours issu du profil de jonction de domaine pour les appareils Microsoft Entra hybride.",
+ "deviceFriendlyName": "Nom convivial de l’appareil pour les appareils Surface Hub. En cas d’entrée, renseignez également le compte d’appareil et le mot de passe du compte d’appareil.",
+ "deviceName": "Nom affiché quand un utilisateur tente de découvrir l'appareil et de s'y connecter.",
+ "deviceUseType": " L'appareil est configuré en fonction de votre choix. Vous pouvez toujours changer la configuration par la suite dans les paramètres.\r\n
\r\n
Pour les réunions et les présentations, Windows Hello n'est pas activé et les données sont supprimées après chaque session.\r\n
\r\n
Pour la collaboration en équipe, Windows Hello est activé et les profils sont enregistrés pour une connexion rapide
\r\n
",
+ "enrollmentState": "Spécifie si l'appareil est inscrit.",
+ "intuneDevice": "Accédez aux détails de l'appareil associé. N/A signifie qu'aucun appareil n'est associé.",
+ "lastContacted": "Horodatage de la dernière fois où l'appareil a été contacté.",
+ "make": "Fabricant de l'appareil sélectionné.",
+ "model": "Modèle de l'appareil sélectionné",
+ "profile": "Nom du profil affecté à l'appareil.",
+ "profileStatus": "Spécifie si un profil est affecté à l'appareil.",
+ "purchaseOrderId": "ID de bon de commande",
+ "resourceAccount": "Identité de l'appareil ou nom d'utilisateur principal (UPN).",
+ "serialNumber": "Numéro de série de l'appareil sélectionné.",
+ "userPrincipalName": "Utilisateur pour prérenseigner l'authentification pendant l'installation de l'appareil."
+ },
+ "allDevices": "Tous les appareils",
+ "allDevicesAlreadyAssignedError": "Un profil Autopilot est déjà affecté à tous les appareils.",
+ "assignFailedDescription": "Échec de mise à jour des affectations de {0}.",
+ "assignFailedTitle": "Échec de mise à jour des affectations de profil AutoPilot.",
+ "assignSuccessDescription": "Affectations mises à jour pour {0}.",
+ "assignSuccessTitle": "Affectations de profil AutoPilot mises à jour.",
+ "assignSufaceHub2ProfileNextStep": "Étapes suivantes pour ce déploiement",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Affecter ce profil à au moins un groupe d'appareils",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Affecter un compte de ressource à chaque appareil Surface Hub sur lequel vous déployez ce profil",
+ "assignedDevicesCount": "Appareils attribués",
+ "assignedDevicesResourceAccountDescription": "
Pour déployer ce profil sur un appareil, vous devez attribuer un compte de ressource à l'appareil. Sélectionnez un appareil à la fois pour lui attribuer un compte de ressource existant ou pour en créer un. En savoir plus sur les comptes de ressource
",
+ "assignedDevicesResourceAccountStatusBarMessage": "Ce tableau liste uniquement les appareils Surface Hub 2 auxquels ce profil a été attribué.",
+ "assigningDescription": "Mise à jour des affectations de {0}.",
+ "assigningTitle": "Mise à jour des affectations de profil AutoPilot.",
+ "autoremediationContext": "Nous avons détecté un changement matériel sur cet appareil. Nous essayons d’enregistrer automatiquement le nouveau matériel. Vous n'avez rien à faire maintenant ; le statut sera mis à jour lors de la prochaine vérification avec le résultat. En savoir plus sur la réinitialisation du profil.",
+ "autoremediationTitle": "Un correctif est en attente pour l’appareil {0}.",
+ "cannotDeleteMessage": "Ce profil est affecté à des groupes. Vous devez annuler l'affectation de tous les groupes de ce profil pour pouvoir le supprimer.",
+ "cannotDeleteTitle": "Impossible de supprimer {0}",
+ "createdDateTime": "Création",
+ "deleteMessage": "Si vous supprimez ce profil AutoPilot, tous les appareils affectés à ce profil apparaîtront avec l'état « Non affecté ».",
+ "deleteMessageWithPolicySet": "{0} est incluse dans un ou plusieurs ensembles de stratégies. Si vous supprimez {0}, vous ne serez plus en mesure de l'affecter par l'intermédiaire de ces ensembles de stratégies.",
+ "deleteTitle": "Voulez-vous vraiment supprimer ce profil ?",
+ "description": "Description",
+ "deviceType": "Type de périphérique",
+ "deviceUse": "Utilisation de l'appareil",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot prend en charge uniquement une jonction à Microsoft Entra pour les appareils Surface Hub 2. Spécifiez le type de jointure Active Directory (AD) pour les appareils de votre organisation.\r\n
\r\n
\r\n
\r\n Joint à Microsoft Entra : Cloud uniquement sans instance locale de Windows Server Active Directory.\r\n
\r\n Spécifiez le mode de jointure des appareils à Active Directory (AD) dans votre organisation :\r\n
\r\n
\r\n
\r\n Joint à Microsoft Entra : cloud uniquement sans Windows Server Active Directory local\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Une erreur s'est produite pendant la récupération du nombre d'appareils affectés.",
+ "getAssignmentsError": "Une erreur s'est produite pendant la récupération des affectations de profil AutoPilot.",
+ "harvestDeviceId": "Convertir tous les appareils ciblés en Autopilot",
+ "harvestDeviceIdDescription": "Par défaut, ce profil est applicable seulement aux appareils Autopilot synchronisés à partir du service Autopilot.",
+ "harvestDeviceIdInfo": "\r\n Sélectionnez Oui pour inscrire tous les appareils ciblés à Autopilot s'ils ne le sont pas déjà. La prochaine fois que les appareils inscrits utilisent l'expérience OOBE, ils sont dirigés vers le scénario Autopilot affecté.\r\n \r\n Notez que certains scénarios Autopilot nécessitent des builds minimales spécifiques. Vérifiez que votre appareil dispose de la build minimale nécessaire pour utiliser le scénario.\r\n \r\n La suppression de ce profil ne supprime pas les appareils concernés dans Autopilot. Pour supprimer un appareil dans Autopilot, utilisez la vue Appareils Windows Autopilot.\r\n ",
+ "harvestDeviceIdWarning": "Pour rétablir des appareils après la conversion, vous devez les supprimer de la liste des appareils Autopilot.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Les profils Windows AutoPilot Deployment vous permettent de personnaliser l'expérience OOBE (Out-of-Box Experience) sur vos appareils.",
+ "invalidProfileNameMessage": "Le caractère « {0} » n'est pas autorisé",
+ "joinTypeLabel": "Rejoindre Microsoft Entra ID en tant que",
+ "lastModifiedDateTime": "Dernière modification le :",
+ "manualRemediationContext": "Nous avons détecté une modification matérielle sur cet appareil. Il ne recevra pas automatiquement un profil Autopilot lorsqu’il sera réinitialisé, sauf si vous réinscrivez l’appareil. En savoir plus sur la réinitialisation du profil.",
+ "manualRemediationTitle": "L’appareil {0} requiert votre attention.",
+ "name": "Nom",
+ "noAutopilotProfile": "Aucun profil AutoPilot",
+ "notEnoughPermissionAssignedError": "Vous n'avez pas les autorisations suffisantes pour affecter ce profil à un ou plusieurs groupes sélectionnés. Contactez votre administrateur.",
+ "profile": "profil",
+ "resourceAccountStatusBarMessage": "Un compte de ressource est obligatoire pour chaque appareil Surface Hub 2 sur lequel ce profil est déployé. Cliquez pour en savoir plus.",
+ "selectServices": "Sélectionner le service d'annuaire que joindront les appareils",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Mode de déploiement",
+ "windowsPCCommandMenu": "PC Windows",
+ "directoryServiceLabel": "Rejoindre Microsoft Entra ID en tant que"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Appareils gérés",
+ "devicesWithoutEnrollment": "Applications gérées"
+ },
+ "AppProtection": {
+ "allAppTypes": "Cibler sur tous les types d'application",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Applications dans le profil professionnel Android",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Applications sur les appareils dédiés Android Enterprise avec le mode partagé Microsoft Entra",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Utilisateur de projet open source d’applications sur Android associé",
+ "appsOnAndroidOpenSourceProjectUserless": "Applications sur un projet open source Android sans utilisateur",
+ "appsOnIntuneManagedDevices": "Applications sur les appareils gérés par Intune",
+ "appsOnUnmanagedDevices": "Applications sur les appareils non gérés",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Indisponible",
+ "windows10PlatformLabel": "Windows 10 et ultérieur",
+ "withEnrollment": "Avec inscription",
+ "withoutEnrollment": "Sans inscription"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Client de bureau Project Online",
+ "visioProRetail": "Visio Online Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Échec de la suppression de {0}",
+ "failureCa": "Échec de la suppression de {0}, car elle est référencée par des stratégies d’autorité de certification",
+ "modifying": "Suppression de {0}",
+ "success": "{0} supprimé"
+ },
+ "Notify": {
+ "failure": "Échec de la mise à jour de {0}",
+ "modifying": "Modification de {0}",
+ "success": "{0} mis à jour"
+ },
+ "menuLabel": "Contexte d’authentification"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "En savoir plus sur l’obligation de méthodes d’authentification satisfaites par les fournisseurs de fédération.",
+ "certificate": "Authentification par certificat",
+ "infoBubble": "Spécifiez la méthode d'authentification requise, qui doit être suivie par le fournisseur de fédération, tel qu'ADFS.",
+ "multifactor": "Authentification multifacteur",
+ "require": "Exiger la méthode d'authentification fédérée (préversion)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "La stratégie de session de navigateur persistante ne fonctionne correctement que lorsque l'option « Toutes les applications cloud » est sélectionnée. Mettez à jour votre sélection d’applications cloud."
+ },
+ "Option": {
+ "always": "Toujours persistant",
+ "help": "Une session de navigateur persistante autorise les utilisateurs à rester connectés après fermeture et réouverture de la fenêtre du navigateur. \n
\n
Ce paramètre fonctionne correctement lorsque l'option « Toutes les applications cloud » est sélectionnée
\n
Cela n’affecte pas la durée de vie des jetons ou le paramètre de fréquence de connexion.
\n
Cela remplace la stratégie « Afficher l'option pour rester connecté » dans la personnalisation de l'entreprise.
\n
L'option « Jamais persistant » remplace toute réclamation d'authentification unique persistante en provenance de services d’authentification fédérée.
\n
L'option « Jamais persistant » empêche l’authentification unique sur les appareils mobiles entre différentes applications, et entre les applications et le navigateur mobile de l’utilisateur.
\n",
+ "label": "Session de navigateur persistante",
+ "never": "Jamais persistant"
+ },
+ "Warning": {
+ "allApps": "La stratégie de session de navigateur persistante ne fonctionne correctement que lorsque l'option « Toutes les applications cloud » est sélectionnée. Modifiez votre sélection d’applications cloud. Cliquez ici pour en savoir plus."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Heures ou jours",
+ "value": "Fréquence"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} jours",
+ "singular": "1 jour"
+ },
+ "Hour": {
+ "plural": "{0} heures",
+ "singular": "1 heure"
+ },
+ "daysOption": "Jours",
+ "everytime": "À chaque fois",
+ "help": "Durée avant qu’un utilisateur soit invité à se reconnecter lors de la tentative d’accès à une ressource. Le paramètre par défaut est une fenêtre dynamique de 90 jours, c’est-à-dire que les utilisateurs doivent s’authentifier à nouveau à la première tentative d’accès à une ressource après un temps d'inactivité de 90 jours ou plus sur leur ordinateur.",
+ "hoursOption": "Heures",
+ "label": "Fréquence de connexion",
+ "placeholder": "Sélectionner les unités"
+ }
+ },
+ "mainOption": "Modifier la durée de vie de la session",
+ "mainOptionHelp": "Configurer la fréquence à laquelle les utilisateurs seront invités et indiquer si les sessions de navigateur seront persistantes. Les applications qui ne prennent pas en charge les protocoles d’authentification modernes ne pourront pas honorer ces stratégies. Dans ce cas, contactez le développeur d’applications."
+ },
+ "SingleSelectorActive": {
+ "failed": "Désolé... Nous n’avons pas pu charger ces données.",
+ "reattempt": "Chargement des données. Retentez l' {0} sur {1}."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Choisir des rôles d’annuaire"
+ },
+ "Excluded": {
+ "gridAria": "Liste des utilisateurs exclus"
+ },
+ "Included": {
+ "gridAria": "Liste des utilisateurs inclus"
+ },
+ "Validation": {
+ "customRoleIncluded": "« Rôles d'annuaire » : inclut au moins un rôle personnalisé",
+ "customRoleSelected": "Au moins un rôle personnalisé est sélectionné",
+ "failed": "« {0} » doit être configuré",
+ "roles": "Sélectionner au moins un rôle",
+ "usersGroups": "Sélectionner au moins un utilisateur ou un groupe"
+ },
+ "learnMore": "Contrôlez l’accès en fonction des personnes auxquelles la stratégie s’applique, telles que des utilisateurs et des groupes, des identités de charge de travail, des rôles d’annuaire ou des invités externes."
+ },
+ "advancedTabText": "Avancé",
+ "allCloudAppsErrorBox": "L'option « Toutes les applications cloud » doit être sélectionnée quand l’autorisation « Exiger une modification du mot de passe » est sélectionnée",
+ "allCloudAppsReauth": "« Toutes les applications cloud » doivent être sélectionnées lorsque le contrôle de session « Fréquence de connexion à chaque fois » et la condition « Risque de connexion » sont sélectionnés",
+ "allCloudOrSpecificApps": "Le contrôle de session « Fréquence de connexion à chaque fois » nécessite la sélection de « toutes les applications cloud » ou d’applications spécifiquement prises en charge",
+ "allDayCheckboxLabel": "Toute la journée",
+ "allDevicePlatforms": "N'importe quel périphérique",
+ "allGuestUserInfoContent": "Inclut les invités Microsoft Entra B2B, mais pas les invités SharePoint B2B",
+ "allGuestUserLabel": "Tous les utilisateurs invités et externes",
+ "allRiskLevelsOption": "Tous niveaux de risque",
+ "allTrustedLocationLabel": "Tous les emplacements approuvés",
+ "allUserGroupSetSelectorLabel": "Tous les utilisateurs et groupes sélectionnés",
+ "allUsersReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » nécessite la sélection de « Tous les utilisateurs »",
+ "allUsersString": "Tous les utilisateurs",
+ "and": "{0} ET {1}",
+ "andWithGrouping": "({0}) ET {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "N’importe quelle application cloud",
+ "appContextOptionInfoContent": "Balise d'authentification demandée",
+ "appContextOptionLabel": "Balise d'authentification demandée (préversion)",
+ "appContextUriPlaceholder": "Exemple : uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Les restrictions appliquées par l'application peuvent nécessiter des configurations supplémentaires de la part de l'administrateur au sein des applications cloud. Celles-ci ne seront valides que pour les nouvelles sessions.",
+ "appNotSetSeletorLabel": "0 application cloud sélectionnée",
+ "appReauthNotSupported": "Cette application ne prend pas en charge le contrôle de session « Fréquence de connexion à chaque fois ».",
+ "applyConditionClientAppInfoBalloonContent": "Configurer les applications clientes pour appliquer la stratégie à des applications clientes spécifiques",
+ "applyConditionDevicePlatformInfoBalloonContent": "Configurer les plateformes d'appareils pour appliquer la stratégie à des plateformes spécifiques",
+ "applyConditionDeviceStateInfoBalloonContent": "Configurer l'état des appareils pour appliquer la stratégie à des états d'appareils spécifiques",
+ "applyConditionLocationInfoBalloonContent": "Configurer les emplacements pour appliquer la stratégie aux emplacements approuvés/non approuvés",
+ "applyConditionSigninRiskInfoBalloonContent": "Configurer le risque de connexion pour appliquer la stratégie aux niveaux de risque sélectionnés",
+ "applyConditionUserRiskInfoBalloonContent": "Configurer le risque utilisateur pour appliquer la stratégie aux niveaux de risque sélectionnés",
+ "applyConditonLabel": "Configurer",
+ "ariaLabelPolicyDisabled": "La stratégie est désactivée",
+ "ariaLabelPolicyEnabled": "La stratégie est activée",
+ "ariaLabelPolicyReportOnly": "La stratégie est en mode Rapport uniquement",
+ "blockAccess": "Bloquer l'accès",
+ "builtInDirectoryRoleLabel": "Rôles d’annuaire intégrés",
+ "casCustomControlInfo": "Les stratégies personnalisées doivent être configurées dans le portail Cloud App Security. Ce contrôle fonctionne instantanément pour les applications disponibles et peut être intégré automatiquement pour n'importe quelle application. Cliquez ici pour en savoir plus sur les deux scénarios.",
+ "casInfoBubble": "Ce contrôle fonctionne pour différentes applications cloud.",
+ "casPreconfiguredControlInfo": "Ce contrôle fonctionne instantanément pour les applications disponibles et peut être intégré automatiquement pour n'importe quelle application. Cliquez ici pour en savoir plus sur les deux scénarios.",
+ "cert64DownloadCol": "Télécharger un certificat en base64",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Télécharger le certificat",
+ "certDurationCol": "Expiration",
+ "certDurationStartCol": "Valide depuis",
+ "certName": "VpnCert",
+ "certainApps": "Seules les applications spécifiquement prises en charge sont activées pour « Fréquence de connexion à chaque fois » si les octrois « Exiger une authentification multifacteur » et « Exiger une modification de mot de passe » ne sont pas sélectionnés",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Choisir les applications",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Applications choisies",
+ "chooseApplicationsEmpty": "Aucune application",
+ "chooseApplicationsNone": "Aucun",
+ "chooseApplicationsNoneFound": "« {0} » est introuvable. Essayez un autre nom ou identifiant.",
+ "chooseApplicationsPlural": "{0} et {1} autres ",
+ "chooseApplicationsReAuthEverytimeInfo": "Vous recherchez votre application ? Certaines applications ne peuvent pas être utilisées avec le contrôle de session « Exiger une réauthentification – à chaque fois »",
+ "chooseApplicationsRemove": "Supprimer",
+ "chooseApplicationsReturnedPlural": "{0} applications trouvées",
+ "chooseApplicationsReturnedSingular": "1 application trouvée",
+ "chooseApplicationsSearchBalloon": "Recherchez une application en entrant son nom ou identifiant.",
+ "chooseApplicationsSearchHint": "Rechercher des applications...",
+ "chooseApplicationsSearchLabel": "Applications",
+ "chooseApplicationsSearching": "Recherche en cours...",
+ "chooseApplicationsSelect": "Sélectionner",
+ "chooseApplicationsSelected": "Sélectionné",
+ "chooseApplicationsSingular": "{0} et 1 autre",
+ "chooseApplicationsTooMany": "Impossible d'afficher tous les résultats. Filtrez à l’aide de la zone de recherche.",
+ "chooseLocationCorpnetItem": "Réseau d'entreprise",
+ "chooseLocationSelectedLocationsLabel": "Emplacements sélectionnés",
+ "chooseLocationTrustedIpsItem": "Adresses IP approuvées pour l’authentification multifacteur",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Choisir les emplacements",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Emplacements choisis",
+ "chooseLocationsEmpty": "Aucun emplacement",
+ "chooseLocationsExcludedSelectorTitle": "Sélectionner",
+ "chooseLocationsIncludedSelectorTitle": "Sélectionner",
+ "chooseLocationsNone": "Aucun",
+ "chooseLocationsNoneFound": "« {0} » est introuvable. Essayez un autre nom ou identifiant.",
+ "chooseLocationsPlural": "{0} et {1} autres ",
+ "chooseLocationsRemove": "Supprimer",
+ "chooseLocationsReturnedPlural": "{0} emplacements trouvés",
+ "chooseLocationsReturnedSingular": "1 emplacement trouvé",
+ "chooseLocationsSearchBalloon": "Recherchez un emplacement en entrant son nom.",
+ "chooseLocationsSearchHint": "Rechercher des emplacements...",
+ "chooseLocationsSearchLabel": "Emplacements",
+ "chooseLocationsSearching": "Recherche en cours...",
+ "chooseLocationsSelect": "Sélectionner",
+ "chooseLocationsSelected": "Sélectionné",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Sélectionner",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Sélectionner",
+ "chooseLocationsSingular": "{0} et 1 autre",
+ "chooseLocationsTooMany": "Impossible d'afficher tous les résultats. Filtrez à l’aide de la zone de recherche.",
+ "claimProviderAddCommandText": "Nouveau contrôle personnalisé",
+ "claimProviderAddNewBladeTitle": "Nouveau contrôle personnalisé",
+ "claimProviderDeleteCommand": "Supprimer",
+ "claimProviderDeleteDescription": "Êtes-vous sûr de vouloir supprimer « {0} » ? Cette action ne peut pas être annulée.",
+ "claimProviderDeleteTitle": "Êtes-vous sûr ?",
+ "claimProviderEditInfoText": "Entrez le JSON pour les contrôles personnalisés donnés par vos fournisseurs de revendication.",
+ "claimProviderNotificationCreateDescription": "Création du contrôle personnalisé nommé « {0} »",
+ "claimProviderNotificationCreateFailedDescription": "La création du contrôle personnalisé « {0} » a échoué. Réessayez ultérieurement.",
+ "claimProviderNotificationCreateFailedTitle": "Impossible de créer le contrôle personnalisé",
+ "claimProviderNotificationCreateSuccessDescription": "Le contrôle personnalisé nommé « {0} » a été créé",
+ "claimProviderNotificationCreateSuccessTitle": "« {0} » créé",
+ "claimProviderNotificationCreateTitle": "Création de « {0} »",
+ "claimProviderNotificationDeleteDescription": "Suppression du contrôle personnalisé nommé « {0} »",
+ "claimProviderNotificationDeleteFailedDescription": "La suppression du contrôle personnalisé « {0} » a échoué. Réessayez ultérieurement.",
+ "claimProviderNotificationDeleteFailedTitle": "Impossible de supprimer le contrôle personnalisé",
+ "claimProviderNotificationDeleteSuccessDescription": "Le contrôle personnalisé nommé « {0} » a été supprimé",
+ "claimProviderNotificationDeleteSuccessTitle": "« {0} » supprimé",
+ "claimProviderNotificationDeleteTitle": "Suppression de « {0} »",
+ "claimProviderNotificationUpdateDescription": "Mise à jour du contrôle personnalisé nommé « {0} »",
+ "claimProviderNotificationUpdateFailedDescription": "La mise à jour du contrôle personnalisé « {0} » a échoué. Réessayez ultérieurement.",
+ "claimProviderNotificationUpdateFailedTitle": "Impossible de mettre à jour le contrôle personnalisé",
+ "claimProviderNotificationUpdateSuccessDescription": "Le contrôle personnalisé nommé « {0} » a été mis à jour",
+ "claimProviderNotificationUpdateSuccessTitle": "« {0} » mis à jour",
+ "claimProviderNotificationUpdateTitle": "Mise à jour de « {0} »",
+ "claimProviderValidationAppIdInvalid": "La valeur « AppId » n'est pas valide. Vérifiez et réessayez.",
+ "claimProviderValidationClientIdMissing": "Il manque une valeur « ClientId » dans les données. Vérifiez et réessayez.",
+ "claimProviderValidationControlClaimsRequestedMissing": "Il manque une valeur « ClaimsRequested » dans le contrôle. Vérifiez et réessayez.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "Il manque une valeur « Type » dans l'élément « ClaimsRequested ». Vérifiez et réessayez.",
+ "claimProviderValidationControlIdAlreadyExists": "La valeur « Control » « ID » existe déjà. Vérifiez et réessayez.",
+ "claimProviderValidationControlIdMissing": "Il manque une valeur « Id » dans le contrôle. Vérifiez et réessayez.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "La valeur « Control » « ID » ne peut pas être supprimée, car elle est référencée dans une stratégie existante. Supprimez-la de la stratégie.",
+ "claimProviderValidationControlIdTooManyControls": "La propriété « control » contient trop de contrôles. Vérifiez et réessayez.",
+ "claimProviderValidationControlIdValueReserved": "La valeur « Control » « ID » est un mot clé réservé. Utilisez un autre ID.",
+ "claimProviderValidationControlNameAlreadyExists": "La valeur « Control » « Name » existe déjà. Vérifiez et réessayez.",
+ "claimProviderValidationControlNameMissing": "Il manque une valeur « Name » dans le contrôle. Vérifiez et réessayez.",
+ "claimProviderValidationControlsMissing": "Il manque une valeur « Controls » dans les données. Vérifiez et réessayez.",
+ "claimProviderValidationDiscoveryUrlMissing": "Il manque une valeur « DiscoveryUrl » dans les données. Vérifiez et réessayez.",
+ "claimProviderValidationInvalid": "Les données fournies ne sont pas valides. Vérifiez et réessayez.",
+ "claimProviderValidationInvalidJsonDefinition": "Impossible d'enregistrer le contrôle personnalisé. Vérifiez le texte JSON et réessayez.",
+ "claimProviderValidationNameAlreadyExists": "La valeur « Name » existe déjà. Vérifiez et réessayez.",
+ "claimProviderValidationNameMissing": "Il manque une valeur « Name » dans les données. Vérifiez et réessayez.",
+ "claimProviderValidationUnknown": "Une erreur inconnue s'est produite lors de la validation des données fournies. Vérifiez et réessayez.",
+ "claimProvidersNone": "Aucun contrôle personnalisé",
+ "claimProvidersSearchPlaceholder": "Recherchez des contrôles.",
+ "classicPoilcyFilterTitle": "Afficher",
+ "classicPolicyAllPlatforms": "Toutes les plateformes",
+ "classicPolicyClientAppBrowserAndNative": "Navigateur, applications mobiles et clients de bureau",
+ "classicPolicyCloudAppTitle": "Application cloud",
+ "classicPolicyControlAllow": "Autoriser",
+ "classicPolicyControlBlock": "Bloquer",
+ "classicPolicyControlBlockWhenNotAtWork": "Bloquer l'accès quand l'utilisateur n'est pas au travail",
+ "classicPolicyControlRequireCompliantDevice": "Exiger un appareil conforme",
+ "classicPolicyControlRequireDomainJoinedDevice": "Exiger un appareil joint au domaine",
+ "classicPolicyControlRequireMfa": "Exiger une authentification multifacteur",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Exiger une authentification multifacteur lorsqu’il n’est pas au travail",
+ "classicPolicyDeleteCommand": "Supprimer",
+ "classicPolicyDeleteFailTitle": "Échec de la suppression de la stratégie classique",
+ "classicPolicyDeleteInProgressTitle": "Suppression de la stratégie classique",
+ "classicPolicyDeleteSuccessTitle": "Stratégie classique supprimée",
+ "classicPolicyDetailBladeTitle": "Détails",
+ "classicPolicyDisableCommand": "Désactiver",
+ "classicPolicyDisableConfirmation": "Êtes-vous sûr de vouloir désactiver « {0} » ? Cette action ne peut pas être annulée.",
+ "classicPolicyDisableFailDescription": "Échec de la désactivation de « {0} »",
+ "classicPolicyDisableFailTitle": "Échec de la désactivation de la stratégie classique",
+ "classicPolicyDisableInProgressDescription": "Désactivation de « {0} »",
+ "classicPolicyDisableInProgressTitle": "Désactivation de la stratégie classique",
+ "classicPolicyDisableSuccessDescription": "« {0} » désactivée",
+ "classicPolicyDisableSuccessTitle": "Stratégie classique désactivée",
+ "classicPolicyEasSupportedPlatforms": "Plateformes prises en charge Exchange ActiveSync",
+ "classicPolicyEasUnsupportedPlatforms": "Plateformes non prises en charge Exchange ActiveSync",
+ "classicPolicyExcludedPlatformsTitle": "Plateformes d'appareils exclues",
+ "classicPolicyFilterAll": "Toutes les stratégies",
+ "classicPolicyFilterDisabled": "Stratégies désactivées",
+ "classicPolicyFilterEnabled": "Stratégies activées",
+ "classicPolicyIncludeExcludeMembersDescription": "En excluant des groupes, vous pouvez effectuer une migration progressive de stratégies.",
+ "classicPolicyIncludeExcludeMembersTitle": "Inclure/exclure des groupes",
+ "classicPolicyIncludedPlatformsTitle": "Plates-formes d'appareils inclus",
+ "classicPolicyManualMigrationMessage": "Cette stratégie doit être migrée manuellement.",
+ "classicPolicyMigrateCommand": "Migrer",
+ "classicPolicyMigrateConfirmation": "Êtes-vous sûr de vouloir migrer « {0} » ? Cette stratégie ne peut être migrée qu’une seule fois.",
+ "classicPolicyMigrateFailDescription": "Échec de la migration de « {0} »",
+ "classicPolicyMigrateFailTitle": "Échec de la migration de la stratégie classique",
+ "classicPolicyMigrateInProgressDescription": "Migration de « {0} » en cours...",
+ "classicPolicyMigrateInProgressTitle": "Migration de la stratégie classique",
+ "classicPolicyMigrateRecommendText": "Recommandation : migrez vers les nouvelles stratégies du portail Azure.",
+ "classicPolicyMigrateSuccessTitle": "Stratégie classique migrée",
+ "classicPolicyMigratedSuccessDescription": "Cette stratégie classique peut désormais être gérée sous Stratégies.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "Cette stratégie classique est migrée sous la forme de {0} nouvelles stratégies. Les nouvelles stratégies peuvent être gérés sous Stratégies.",
+ "classicPolicyNoEditPermissionMsg": "Vous n'êtes pas autorisé à modifier cette stratégie. Seuls les administrateurs généraux et les administrateurs de la sécurité peuvent modifier la stratégie. Pour plus d'informations, cliquez ici.",
+ "classicPolicySaveFailDescription": "Échec de l'enregistrement de « {0} »",
+ "classicPolicySaveFailTitle": "Échec de l’enregistrement de la stratégie classique",
+ "classicPolicySaveInProgressDescription": "Enregistrement de « {0} »",
+ "classicPolicySaveInProgressTitle": "Enregistrement de la stratégie classique",
+ "classicPolicySaveSuccessDescription": "« {0} » enregistrée",
+ "classicPolicySaveSuccessTitle": "Stratégie classique enregistrée",
+ "clientAppBladeLegacyInfoBanner": "L'authentification héritée n'est pas prise en charge actuellement.",
+ "clientAppBladeLegacyUpsellBanner": "Bloquer les applications clientes non prises en charge (préversion)",
+ "clientAppBladeTitle": "Applications clientes",
+ "clientAppDescription": "Sélectionner les applications clientes auxquelles cette stratégie s'applique",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync ne prend pas actuellement en charge toutes les autres conditions.",
+ "clientAppLearnMore": "Contrôlez l’accès utilisateur à des applications clientes spécifiques cibles qui n’utilisent pas l’authentification moderne.",
+ "clientAppLegacyHeader": "Clients d’authentification hérités",
+ "clientAppMobileDesktop": "Applications mobiles et clients de bureau",
+ "clientAppModernHeader": "Clients d'authentification modernes",
+ "clientAppOnlySupportedPlatforms": "Appliquer la stratégie uniquement aux plateformes prises en charge",
+ "clientAppSelectSpecificClientApps": "Sélectionner des applications clientes",
+ "clientAppWebBrowser": "Navigateur",
+ "clientAppsSelectedLabel": "{0} inclus",
+ "clientTypeBrowser": "Navigateur",
+ "clientTypeEas": "Clients Exchange ActiveSync",
+ "clientTypeEasInfo": "Clients Exchange ActiveSync qui utilisent uniquement l’authentification héritée.",
+ "clientTypeModernAuth": "Clients d'authentification moderne",
+ "clientTypeOtherClients": "Autres clients",
+ "clientTypeOtherClientsInfo": "Cela inclut les anciens clients Office et autres protocoles de messagerie (POP, IMAP, SMTP, etc.). [En savoir plus][1]\n[1] : https://aka.ms/caclientapps\n ",
+ "cloudAppCountDiffBannerText": "{0} applications cloud configurées dans cette stratégie ont été supprimées de l'annuaire, mais cela n'affecte pas les autres applications dans la stratégie. La prochaine fois que vous mettrez à jour la section Application de la stratégie, les applications supprimées seront supprimées automatiquement de celle-ci.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Toutes les applications Microsoft",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Autoriser les applications mobiles, de bureau et cloud Microsoft (préversion)",
+ "cloudappsSelectionBladeAllCloudapps": "Toutes les applications cloud",
+ "cloudappsSelectionBladeExcludeDescription": "Sélectionner les applications cloud à exclure de la stratégie",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Sélectionner les applications cloud exclues",
+ "cloudappsSelectionBladeIncludeDescription": "Sélectionner les applications cloud auxquelles cette stratégie s'applique",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Sélectionner",
+ "cloudappsSelectionBladeSelectedCloudapps": "Sélectionner les applications",
+ "cloudappsSelectorInfoBallonText": "Services auxquels l'utilisateur accède pour son travail. Par exemple « Salesforce »",
+ "cloudappsSelectorPluralExcluded": "{0} applications exclues",
+ "cloudappsSelectorPluralIncluded": "{0} applications incluses",
+ "cloudappsSelectorSingularExcluded": "1 application exclue",
+ "cloudappsSelectorSingularIncluded": "1 application incluse",
+ "cloudappsSelectorUserPlural": "{0} applications",
+ "cloudappsSelectorUserSingular": "1 application",
+ "conditionLabelMulti": "{0} conditions sélectionnées",
+ "conditionLabelOne": "1 condition sélectionnée",
+ "conditionalAccessBladeTitle": "Accès conditionnel",
+ "conditionsNotSelectedLabel": "Non configuré",
+ "conditionsReqMfaReauthSet": "Certaines options ne sont pas disponibles en raison de l’octroi « Exiger l’authentification multifacteur » et du contrôle de session « Fréquence de connexion à chaque fois » actuellement sélectionnés",
+ "conditionsReqPwSet": "Certaines options ne sont pas disponibles en raison de l’autorisation « Exiger une modification du mot de passe » en cours de sélection",
+ "configureCasText": "Configurer Cloud App Security",
+ "configureCustomControlsText": "Configurer une stratégie personnalisée",
+ "controlLabelMulti": "{0} contrôles sélectionnés",
+ "controlLabelOne": "1 contrôle sélectionné",
+ "controlValidatorText": "Sélectionnez au moins un contrôle.",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "En savoir plus sur l’obligation d’appareils conformes.",
+ "controlsDeviceComplianceInfoBubble": "L'appareil doit être compatible avec Intune. Si ce n'est pas le cas, l'utilisateur est invité à le rendre conforme.",
+ "controlsDomainJoinedAriaLabel": "En savoir plus sur la nécessité d’utiliser des appareils avec jointure Microsoft Entra hybride.",
+ "controlsDomainJoinedInfoBubble": "Les appareils doivent disposer d’une jointure Microsoft Entra hybride.",
+ "controlsMamAriaLabel": "En savoir plus sur l’exigence d’applications clientes approuvées.",
+ "controlsMamInfoBubble": "L'appareil doit utiliser ces applications clientes approuvées.",
+ "controlsMfaInfoBubble": "L'utilisateur doit répondre à des exigences de sécurité supplémentaires, telles qu'un appel téléphonique ou un SMS",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "En savoir plus sur la nécessité d’applications protégées par une stratégie.",
+ "controlsRequireCompliantAppInfoBubble": "L’appareil doit utiliser des applications protégées par une stratégie.",
+ "controlsRequirePasswordResetAriaLabel": "En savoir plus sur l’obligation de modifier le mot de passe.",
+ "controlsRequirePasswordResetInfoBubble": "Exiger la modification du mot de passe pour réduire le risque utilisateur. Cette option nécessite également une authentification multifacteur. Les autres contrôles ne peuvent pas être utilisés.",
+ "countriesRadiobuttonInfoBalloonContent": "Le pays ou la région d'où provient la connexion est déterminé par l'adresse IP de l'utilisateur.",
+ "createNewVpnCert": "Nouveau certificat",
+ "createdTimeLabel": "Heure de création",
+ "customRoleLabel": "Rôles personnalisés (non pris en charge)",
+ "dateRangeTypeLabel": "Plage de dates",
+ "daysOfWeekPlaceholderText": "Filtrer les jours de la semaine",
+ "daysOfWeekTypeLabel": "Jours de la semaine",
+ "deletePolicyNoLicenseText": "Vous pouvez supprimer cette stratégie maintenant. Une fois supprimée, vous ne pourrez pas la recréer avant d'avoir les licences requises.",
+ "descriptionContentForControlsAndOr": "Pour plusieurs contrôles",
+ "devicePlatform": "Plateforme de l'appareil",
+ "devicePlatformConditionHelpDescription": "Appliquez la stratégie aux plateformes d’appareils sélectionnées.\n[En savoir plus][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} inclus",
+ "devicePlatformIncludeExclude": "{0} et {1} exclus",
+ "devicePlatformNoSelectionError": "Les plateformes d’appareils sélectionnées nécessitent la sélection d’un sous-élément.",
+ "devicePlatformsNone": "Aucun",
+ "deviceSelectionBladeExcludeDescription": "Sélectionner les plateformes à exclure de la stratégie",
+ "deviceSelectionBladeIncludeDescription": "Sélectionner les plateformes d'appareil à inclure dans cette stratégie",
+ "deviceStateAll": "Tous les états d'appareils",
+ "deviceStateCompliant": "Appareil marqué comme conforme",
+ "deviceStateCompliantInfoContent": "Les appareils compatibles avec Intune sont exclus de l'évaluation de cette stratégie. Ainsi, par exemple, si la stratégie bloque l'accès, elle bloque tous les appareils à l'exception des appareils compatibles avec Intune.",
+ "deviceStateConditionConfigureInfoContent": "Configurer la stratégie en fonction de l'état de l'appareil",
+ "deviceStateConditionSelectorInfoContent": "Si l’appareil à partir duquel l’utilisateur se connecte dispose d’une « jointure Microsoft Entra hybride » ou est « marqué comme conforme ».\n Cela a été déconseillé. Utilisez « {1} » à la place.",
+ "deviceStateConditionSelectorLabel": "État de l’appareil (déconseillé)",
+ "deviceStateDomainJoined": "Appareil avec jointure Microsoft Entra hybride",
+ "deviceStateDomainJoinedInfoContent": "Les appareils avec jointure Microsoft Entra hybride sont exclus de l'évaluation de cette stratégie. Ainsi, par exemple, si la stratégie bloque l'accès à cette dernière, elle bloque tous les appareils, à l'exception des appareils avec jointure Microsoft Entra hybride.",
+ "deviceStateDomainJoinedInfoLinkText": "En savoir plus.",
+ "deviceStateExcludeDescription": "Sélectionnez la condition d'état d'appareil utilisée pour exclure des appareils de la stratégie.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} et exclusion de {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} et exclusion de {1}, {2}",
+ "directoryRoleInfoContent": "Attribuez une stratégie à des rôles d’annuaire intégrés.",
+ "directoryRolesLabel": "Rôles d'annuaire",
+ "discardbutton": "Ignorer",
+ "downloadDefaultFileName": "Plages d'adresses IP",
+ "downloadExampleFileName": "Exemple",
+ "downloadExampleHeader": "Il s'agit d'un exemple de fichier avec des démonstrations relatives aux types de données qui peuvent être acceptés. Les lignes commençant par # sont ignorées.",
+ "duplicate": "Dupliquer",
+ "duplicatePolicyName": "{0} COPIE",
+ "endDatePickerLabel": "Terminaisons",
+ "endTimePickerLabel": "Heure de fin",
+ "enterCountryText": "L'adresse IP et le pays ou la région sont évalués dans une paire. Sélectionnez le pays.",
+ "enterIpText": "Le pays ou la région et l'adresse IP sont évalués dans une paire. Entrez l'adresse IP.",
+ "enterUserText": "Aucun utilisateur n'est sélectionné. Sélectionnez-en un.",
+ "evaluationResult": "Résultat de l'évaluation",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync avec plateformes prises en charge uniquement",
+ "excludeAllTrustedLocationSelectorText": "tous les emplacements approuvés",
+ "featureRequiresP2": "Cette fonctionnalité nécessite une licence Microsoft Entra ID P2.",
+ "friday": "Vendredi",
+ "grantControls": "Contrôles d'octroi",
+ "gridNetworkTrusted": "Approuvé",
+ "gridPolicyCreatedDateTime": "Date de création",
+ "gridPolicyEnabled": "Activé",
+ "gridPolicyModifiedDateTime": "Date de modification",
+ "gridPolicyName": "Nom de la stratégie",
+ "gridPolicyState": "État",
+ "groupSelectionBladeExcludeDescription": "Sélectionner les groupes à exclure de la stratégie",
+ "groupSelectionBladeExcludedSelectorTitle": "Sélectionner les groupes exclus",
+ "groupSelectionBladeSelect": "Sélectionner des groupes",
+ "groupSelectorInfoBallonText": "Groupes du répertoire auquel la stratégie s'applique. Par exemple « groupe pilote »",
+ "groupsSelectionBladeTitle": "Groupes",
+ "helpCommonScenariosText": "Vous êtes intéressé par les scénarios courants ?",
+ "helpCondition1": "Quand un utilisateur est en dehors du réseau de société",
+ "helpCondition2": "Quand des utilisateurs du groupe 'Responsables' se connectent",
+ "helpConditionsTitle": "Conditions",
+ "helpControl1": "Ils doivent se connecter avec l’authentification multifacteur",
+ "helpControl2": "Ils doivent être sur un appareil Intune ou joint au domaine",
+ "helpControlsTitle": "Contrôle ",
+ "helpIntroText": "L’accès conditionnel vous donne la possibilité d’appliquer des exigences d’accès quand des conditions spécifiques se produisent. Examinons quelques exemples",
+ "helpIntroTitle": "Qu'est-ce que l'accès conditionnel ?",
+ "helpLearnMoreText": "Vous voulez en savoir plus sur l'accès conditionnel ?",
+ "helpStartStep1": "Créer votre première stratégie en cliquant sur « + Nouvelle stratégie »",
+ "helpStartStep2": "Spécifier les conditions et contrôles de la stratégie",
+ "helpStartStep3": "Quand vous avez terminé, n'oubliez pas d'activer la stratégie et de la créer",
+ "helpStartTitle": "Démarrer",
+ "highRisk": "Haute",
+ "includeAndExcludeAppsTextFormat": "Inclure : {0}. Exclure : {1}.",
+ "includeAppsTextFormat": "Inclure : {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Les zones inconnues sont des adresses IP qui ne peuvent pas être mappées à un pays ou une région.",
+ "includeUnknownAreasCheckboxLabel": "Inclure les zones inconnues",
+ "infoCommandLabel": "Informations",
+ "invalidCertDuration": "Durée de certificat non valide",
+ "invalidIpAddress": "La valeur doit être une adresse IP valide",
+ "invalidReAuthSignInRiskOptionSelected": "Le contrôle de session « Fréquence de connexion à chaque fois » n’autorise pas la sélection « aucun risque » dans le contrôle de condition « niveau de risque de connexion ».",
+ "invalidUriErrorMsg": "Entrez un URI valide. Par exemple uri:contoso.com:acr",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Charger tout",
+ "loading": "Chargement...",
+ "locationConfigureNamedLocationsText": "Configurer tous les emplacements approuvés",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Le nom de l'emplacement est trop long. Il doit comprendre 256 caractères maximum",
+ "locationSelectionBladeExcludeDescription": "Sélectionner les emplacements à exclure de la stratégie",
+ "locationSelectionBladeIncludeDescription": "Sélectionnez les emplacements à inclure dans cette stratégie",
+ "locationsAllLocationsLabel": "Tous les emplacements",
+ "locationsAllNamedLocationsLabel": "Toutes les adresses IP approuvées",
+ "locationsAllPrivateLinksLabel": "Tous les liens privés dans mon locataire",
+ "locationsIncludeExcludeLabel": "{0} et exclure toutes les adresses IP approuvées",
+ "locationsSelectedPrivateLinksLabel": "Liaisons privées sélectionnées",
+ "lowRisk": "Bas",
+ "macOsDisplayName": "Mac OS",
+ "managePoliciesLicenseText": "Pour gérer les stratégies d'accès conditionnel, votre organisation doit avoir Microsoft Entra ID P1 ou P2.",
+ "manageSecurityDefaultsAriaLabel": "Gérez les paramètres de sécurité par défaut.",
+ "markAsTrustedCheckboxInfoBalloonContent": "La connexion à partir d'un emplacement approuvé réduit le risque de connexion d'un utilisateur. Marquez uniquement cet emplacement comme approuvé si vous savez que les plages d'adresses IP entrées sont établies et crédibles dans votre organisation.",
+ "markAsTrustedCheckboxLabel": "Marquer comme emplacement approuvé",
+ "mediumRisk": "Moyen",
+ "memberSelectionCommandRemove": "Supprimer",
+ "menuItemClaimProviderControls": "Contrôles personnalisés (préversion)",
+ "menuItemClassicPolicies": "Stratégies classiques",
+ "menuItemInsightsAndReporting": "Insights et rapports",
+ "menuItemManage": "Gérer",
+ "menuItemNamedLocationsPreview": "Emplacements nommés (préversion)",
+ "menuItemNamedNetworks": "Emplacements nommés",
+ "menuItemPolicies": "Stratégies",
+ "menuItemTermsOfUse": "Conditions d'utilisation",
+ "modifiedTimeLabel": "Heure de modification",
+ "monday": "Lundi",
+ "nameLabel": "Nom",
+ "namedLocationCountryInfoBanner": "Seules les adresses IPv4 sont mappées à des pays/régions. Les adresses IPv6 sont incluses dans des pays/régions inconnu(e)s.",
+ "namedLocationTypeCountry": "Pays ou régions",
+ "namedLocationTypeLabel": "Définir l'emplacement à l'aide de :",
+ "namedLocationUpsellBanner": "Cette vue est déconseillée. Accédez à la nouvelle vue améliorée vue « Emplacements nommés ».",
+ "namedLocationsHelpDescription": "Les emplacements nommés sont utilisés par les rapports de sécurité Microsoft Entra ID afin de réduire les faux positifs et par les stratégies d'accès conditionnel Microsoft Entra.\n[En savoir plus][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Ajouter une nouvelle plage IP (ex : 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "Vous devez sélectionner au moins un pays ou une région",
+ "namedNetworkDeleteCommand": "Supprimer",
+ "namedNetworkDeleteDescription": "Êtes-vous sûr de vouloir supprimer « {0} » ? Cette action ne peut pas être annulée.",
+ "namedNetworkDeleteTitle": "Êtes-vous sûr ?",
+ "namedNetworkDownloadIpRange": "Télécharger",
+ "namedNetworkInvalidRange": "La valeur doit être une plage d'adresses IP valide.",
+ "namedNetworkIpRangeNeeded": "Vous devez avoir au moins une plage d'adresses IP valide.",
+ "namedNetworkIpRangesDescriptionContent": "Configurer les plages d'adresses IP de votre organisation",
+ "namedNetworkIpRangesTab": "Plages d'adresses IP",
+ "namedNetworkListAdd": "Nouvel emplacement",
+ "namedNetworkListConfigureTrustedIps": "Configurer des adresses IP approuvées pour l’authentification multifacteur",
+ "namedNetworkNameDescription": "Exemple : « Bureau de Paris »",
+ "namedNetworkNameInvalid": "Le nom fourni n'est pas valide.",
+ "namedNetworkNameRequired": "Vous devez fournir un nom pour cet emplacement.",
+ "namedNetworkNoIpRanges": "Aucune plage d'adresses IP",
+ "namedNetworkNotificationCreateDescription": "Création de l'emplacement nommé « {0} »",
+ "namedNetworkNotificationCreateFailedDescription": "La création de l'emplacement « {0} » a échoué. Réessayez plus tard.",
+ "namedNetworkNotificationCreateFailedTitle": "Impossible de créer l'emplacement",
+ "namedNetworkNotificationCreateSuccessDescription": "Emplacement nommé « {0} » créé",
+ "namedNetworkNotificationCreateSuccessTitle": "« {0} » créé",
+ "namedNetworkNotificationCreateTitle": "Création de « {0} »",
+ "namedNetworkNotificationDeleteDescription": "Suppression de l'emplacement nommé « {0} »",
+ "namedNetworkNotificationDeleteFailedDescription": "La suppression de l'emplacement « {0} » a échoué. Réessayez plus tard.",
+ "namedNetworkNotificationDeleteFailedTitle": "Impossible de supprimer l'emplacement",
+ "namedNetworkNotificationDeleteSuccessDescription": "Emplacement nommé « {0} » supprimé",
+ "namedNetworkNotificationDeleteSuccessTitle": "« {0} » supprimé",
+ "namedNetworkNotificationDeleteTitle": "Suppression de « {0} »",
+ "namedNetworkNotificationUpdateDescription": "Mise à jour de l'emplacement nommé « {0} »",
+ "namedNetworkNotificationUpdateFailedDescription": "La mise à jour de l'emplacement « {0} » a échoué. Réessayez plus tard.",
+ "namedNetworkNotificationUpdateFailedTitle": "Impossible de mettre à jour l'emplacement",
+ "namedNetworkNotificationUpdateSuccessDescription": "Emplacement nommé « {0} » mis à jour",
+ "namedNetworkNotificationUpdateSuccessTitle": "« {0} » mis à jour",
+ "namedNetworkNotificationUpdateTitle": "Mise à jour de « {0} »",
+ "namedNetworkSearchPlaceholder": "Recherchez des emplacements.",
+ "namedNetworkUploadFailedDescription": "Une erreur s'est produite lors de l'analyse du fichier fourni. Veillez à charger un fichier en texte brut avec chaque ligne au format CIDR.",
+ "namedNetworkUploadFailedTitle": "Échec de l'analyse de '{0}'",
+ "namedNetworkUploadInProgressDescription": "Tentative d'analyse des valeurs CIDR valides à partir de « {0} ».",
+ "namedNetworkUploadInProgressTitle": "Analyse de « {0} »",
+ "namedNetworkUploadInvalidDescription": "« {0} » est trop volumineux ou son format n'est pas valide.",
+ "namedNetworkUploadInvalidTitle": "« {0} » non valide",
+ "namedNetworkUploadIpRange": "Charger",
+ "namedNetworkUploadSuccessDescription": "{0} lignes analysées. {1} lignes au format incorrect. {2} ignorées.",
+ "namedNetworkUploadSuccessTitle": "Fin de l'analyse de « {0} »",
+ "namedNetworksAdd": "Nouvel emplacement nommé",
+ "namedNetworksConditionHelpDescription": "Contrôlez l'accès des utilisateurs en fonction de leur emplacement physique.\n[En savoir plus][1]\n[1] : http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} et {1} exclus",
+ "namedNetworksHelpDescription": "Les emplacements nommés sont utilisés par les rapports de sécurité Microsoft Entra ID afin de réduire les faux positifs et par les stratégies d'accès conditionnel Microsoft Entra.\n[En savoir plus][1]\n[1] : https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} inclus",
+ "namedNetworksNone": "Aucun emplacement nommé trouvé.",
+ "namedNetworksTitle": "Configurer les emplacements",
+ "namednetworkExceedingSizeErrorBladeTitle": "Détails de l'erreur",
+ "namednetworkExceedingSizeErrorDetailText": "Cliquez ici pour plus de détails.",
+ "namednetworkExceedingSizeErrorMessage": "Vous avez dépassé la quantité de stockage maximale autorisée pour les emplacements nommés. Réessayez avec une liste plus courte. Cliquez ici pour afficher plus de détails.",
+ "needMfaSecondary": "« Exiger l’authentification multifacteur » doit être sélectionné lorsque « Fréquence de connexion à chaque fois » est sélectionné avec « Méthodes d’authentification secondaires uniquement »",
+ "needMfaSpecificApps": "Le contrôle de session « Fréquence de connexion à chaque fois » nécessite le contrôle d’octroi « Exiger une authentification multifacteur » lorsque des applications prises en charge spécifiquement sont sélectionnées",
+ "newCertName": "Nouveau certificat",
+ "noAttributePermissionsError": "Privilèges insuffisants pour créer ou mettre à jour la stratégie. Le rôle de lecteur de définition d’attribut est obligatoire pour ajouter/modifier des filtres dynamiques.",
+ "noPolicyRowMessage": "Aucune stratégie",
+ "noSPSelected": "Aucun principal du service sélectionné",
+ "noUpdatePermissionMessage": "Vous n'êtes pas autorisé à mettre à jour ces paramètres. Veuillez contacter votre administrateur général pour obtenir l'accès.",
+ "noUserSelected": "Aucun utilisateur sélectionné",
+ "noneRisk": "Aucun risque",
+ "office365Description": "Ces applications incluent Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer et d'autres.",
+ "office365InfoBox": "Au moins l'une des applications sélectionnées fait partie d'Office 365. Nous vous recommandons de définir la stratégie sur l'application Office 365 à la place.",
+ "oneUserSelected": "1 utilisateur sélectionné",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Seuls les administrateurs généraux peuvent enregistrer cette stratégie.",
+ "or": "{0} OU {1}",
+ "pickerDoneCommand": "Terminé",
+ "policiesBladeAdPremiumUpsellBannerText": "Créez vos propres stratégies et ciblez des conditions spécifiques telles que les applications cloud, les connexions à risque et les plateformes d’appareils avec Microsoft Entra ID Premium.",
+ "policiesBladeTitle": "Stratégies",
+ "policiesBladeTitleWithAppName": "Stratégies : {0}",
+ "policiesDisabledBannerText": "La création et la modification des stratégies sont interdites pour les applications avec un attribut d'authentification lié.",
+ "policiesHitMaxLimitStatusBarMessage": "Vous avez atteint le nombre maximal de stratégies pour ce locataire. Supprimez des stratégies avant d'en créer d'autres.",
+ "policyAssignmentsSection": "Affectations",
+ "policyBlockAllInfoBox": "La stratégie configurée bloque tous les utilisateurs. Elle n’est donc pas prise en charge. Passez en revue les affectations et les contrôles. Excluez l’utilisateur actuel {0}, si vous souhaitez enregistrer cette stratégie.",
+ "policyCloudAppsDisplayTextAllApp": "Toutes les applications",
+ "policyCloudAppsLabel": "Applications cloud",
+ "policyConditionClientAppDescription": "Logiciel dont l'utilisateur se sert pour accéder à l'application cloud. Par exemple « Navigateur »",
+ "policyConditionClientAppV2Description": "Logiciel dont l'utilisateur se sert pour accéder à l'application cloud. Par exemple « Navigateur »",
+ "policyConditionDevicePlatform": "Plateformes d’appareils",
+ "policyConditionDevicePlatformDescription": "Plateforme sur laquelle l'utilisateur se connecte. Par exemple iOS",
+ "policyConditionLocation": "Emplacements",
+ "policyConditionLocationDescription": "Emplacement (déterminé à l'aide de la plage d'adresses IP) à partir duquel l'utilisateur se connecte",
+ "policyConditionLocationPreview": "Emplacements (préversion)",
+ "policyConditionSigninRisk": "Risque de connexion",
+ "policyConditionSigninRiskDescription": "Probabilité que la connexion provienne d'une autre personne que l'utilisateur. Le niveau de risque peut être élevé, moyen ou faible. Nécessite une licence Microsoft Entra ID P2.",
+ "policyConditionUserRisk": "Risque de l’utilisateur",
+ "policyConditionUserRiskDescription": "Configurez les niveaux de risque utilisateur nécessaires à l’application de la stratégie",
+ "policyConditioniClientApp": "Applications clientes",
+ "policyControlAllowAccessDisplayedName": "Accorder l'accès",
+ "policyControlAuthenticationStrengthDisplayedName": "Exiger la force de l’authentification (préversion)",
+ "policyControlBladeTitle": "Octroyer",
+ "policyControlBlockAccessDisplayedName": "Bloquer l'accès",
+ "policyControlCompliantDeviceDisplayedName": "Exiger que l'appareil soit marqué comme conforme",
+ "policyControlContentDescription": "Contrôlez l’application de l’accès pour bloquer ou accorder l’accès.",
+ "policyControlInfoBallonText": "Bloquer l'accès ou sélectionner des exigences supplémentaires à satisfaire avant d'autoriser l'accès",
+ "policyControlMfaChallengeDisplayedName": "Exiger une authentification multifacteur",
+ "policyControlRequireCompliantAppDisplayedName": "Exiger une stratégie de protection des applications",
+ "policyControlRequireDomainJoinedDisplayedName": "Exiger un appareil avec jointure Microsoft Entra hybride",
+ "policyControlRequireMamDisplayedName": "Demander une application cliente approuvée",
+ "policyControlRequiredPasswordChangeDisplayedName": "Nécessite une modification du mot de passe",
+ "policyControlSelectAuthStrength": "Exiger la force de l’authentification",
+ "policyControlsNoControlsSelected": "0 contrôles sélectionnés",
+ "policyControlsSection": "Contrôles d'accès",
+ "policyCreatBladeTitle": "Nouveau",
+ "policyCreateButton": "Créer",
+ "policyCreateFailedMessage": "Erreur : {0}",
+ "policyCreateFailedTitle": "Échec de la création de « {0} »",
+ "policyCreateInProgressTitle": "Création de « {0} »",
+ "policyCreateSuccessMessage": "« {0} » créée. La stratégie sera activée dans quelques minutes si vous avez défini « Activer la stratégie » sur « Activé ».",
+ "policyCreateSuccessTitle": "« {0} » créée",
+ "policyDeleteConfirmation": "Êtes-vous sûr de vouloir supprimer « {0} » ? Cette action ne peut pas être annulée.",
+ "policyDeleteFailTitle": "Échec de la suppression de « {0} »",
+ "policyDeleteInProgressTitle": "Suppression de « {0} »",
+ "policyDeleteSuccessTitle": "« {0} » correctement supprimé",
+ "policyEnforceLabel": "Activer une stratégie",
+ "policyErrorCannotSetSigninRisk": "Vous n’êtes pas autorisé à enregistrer une stratégie avec une condition de risque de connexion.",
+ "policyErrorNoPermission": "Vous n'avez pas l'autorisation d'enregistrer la stratégie. Contactez votre administrateur général.",
+ "policyErrorUnknown": "Une erreur s'est produite. Réessayez plus tard.",
+ "policyFallbackWarningMessage": "Échec de la création ou de la mise à jour de « {0} » avec MS Graph, ce qui se traduit par un repli sur AD Graph. Examinez le scénario suivant, car il existe probablement un bogue lors de l’appel du point de terminaison de stratégie pour MS Graph avec une condition incompatible.",
+ "policyFallbackWarningTitle": "Création ou mise à jour de « {0} » partiellement réussie",
+ "policyNameCannotBeEmpty": "Le nom de stratégie ne peut pas être vide.",
+ "policyNameDevice": "Stratégie de l'appareil",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Stratégie de gestion des applications mobiles",
+ "policyNameMfaLocation": "Authentification multifacteur et stratégie d’emplacement",
+ "policyNamePlaceholderText": "Exemple : « stratégie d'application de conformité d'appareil »",
+ "policyNameTooLongError": "Le nom de la stratégie est trop long. 256 caractères maximum",
+ "policyOff": "Désactivé",
+ "policyOn": "Activé",
+ "policyReportOnly": "Rapport uniquement",
+ "policyReviewSection": "Vérifier",
+ "policySaveButton": "Enregistrer",
+ "policyStatusIconDescription": "La stratégie est activée",
+ "policyStatusIconEnabled": "Icône d'état activée",
+ "policyTemplateName1": "Utilisez les restrictions appliquées par l'application pour l'accès au navigateur {0}",
+ "policyTemplateName2": "Autoriser l'accès à {0} seulement sur les appareils managés",
+ "policyTemplateName3": "Stratégie migrée à partir des paramètres d’évaluation de l’accès continu",
+ "policyTriggerRiskSpecific": "Sélectionner un niveau de risque spécifique",
+ "policyTriggersInfoBalloonText": "Conditions qui définissent à quel moment la stratégie s'applique. Par exemple « emplacement »",
+ "policyTriggersNoConditionsSelected": "0 conditions sélectionnées",
+ "policyTriggersSelectorLabel": "Conditions",
+ "policyUpdateFailedMessage": "Erreur : {0}",
+ "policyUpdateFailedTitle": "Échec de la mise à jour de {0}",
+ "policyUpdateInProgressTitle": "Mise à jour de {0}",
+ "policyUpdateSuccessMessage": "{0} correctement mise à jour. La stratégie sera activée dans quelques minutes si vous avez défini « Activer la stratégie » sur « Activé ».",
+ "policyUpdateSuccessTitle": "{0} mis à jour avec succès",
+ "primaryCol": "Principal",
+ "privateLinkLabel": "Liaison privée Microsoft Entra ID",
+ "reportOnlyInfoBox": "Mode rapport uniquement : les stratégies sont évaluées et consignées lors de la connexion, mais n’ont pas d’impact sur les utilisateurs.",
+ "requireAllControlsText": "Demander tous les contrôles sélectionnés",
+ "requireCompliantDevice": "Exiger un appareil conforme",
+ "requireDomainJoined": "Exiger un appareil joint au domaine",
+ "requireGrantReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert un contrôle d’octroi « exiger une authentification multifacteur » ou « exiger une modification du mot de passe » lorsque « Toutes les applications cloud » sont sélectionnées",
+ "requireMFA": "Exiger une authentification multifacteur",
+ "requireMfaReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert le contrôle d’octroi « exiger l’authentification multifacteur » pour « risque de connexion »",
+ "requireOneControlText": "Demander un des contrôles sélectionnés",
+ "requirePasswordChangeReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » nécessite le contrôle d’octroi « exiger une modification du mot de passe » pour « risque utilisateur »",
+ "requireRiskReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert le contrôle de session « Risque utilisateur » ou « Risque de connexion » lorsque « toutes les applications cloud » sont sélectionnées.",
+ "requireRiskReauthRiskNotEnabled": "Le contrôle de session « Fréquence de connexion à chaque fois » n’est pas disponible lorsque « toutes les applications cloud » sont sélectionnées.",
+ "requireRiskReauthSignInOnly": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert le contrôle de session « Risque de connexion » lorsque « toutes les applications cloud » sont sélectionnées.",
+ "requireRiskReauthUserOnly": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert le contrôle de session « Risque utilisateur » lorsque « toutes les applications cloud » sont sélectionnées.",
+ "resetFilters": "Réinitialiser les filtres",
+ "sPRequired": "Le principal du service est obligatoire",
+ "sPSelectorInfoBalloon": "Utilisateur ou principal du service que vous souhaitez tester",
+ "saturday": "Samedi",
+ "searchTextTooLongError": "Le texte de la recherche est trop long. Maximum 256 caractères",
+ "securityDefaultsPolicyName": "Paramètres de sécurité par défaut",
+ "securityDefaultsTextMessage": "Les paramètres de sécurité par défaut doivent être désactivés pour activer la stratégie d’accès conditionnel.",
+ "securityDefaultsUpdateInProgressText": "Une mise à jour des paramètres de sécurité par défaut est en cours. Veuillez patienter quelques instants et réessayer.",
+ "securityDefaultsWarningMessage": "Il semble que vous êtes sur le point de gérer les configurations de sécurité de votre organisation. Excellent ! Vous devez d’abord {0}désactiver les paramètres de sécurité par défaut{1} avant d’activer une stratégie d’accès conditionnel.",
+ "selectDevicePlatforms": "Sélectionner des plateformes d'appareil",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Sélectionner les emplacements",
+ "selectedSP": "Principal du service sélectionné",
+ "servicePrincipalBladeExcludedSelectorTitle": "Sélectionner les principaux de service exclus",
+ "servicePrincipalBladeIncludedSelectorTitle": "Sélectionner des principaux de service",
+ "servicePrincipalDataGridAria": "Liste des principaux du service disponibles",
+ "servicePrincipalDropDownLabel": "À quoi cette stratégie s’applique-t-elle ?",
+ "servicePrincipalInfoBox": "Certaines conditions ne sont pas disponibles en raison de la sélection de « {0} » dans l’affectation de la stratégie",
+ "servicePrincipalRadioAll": "Tous les principaux du service détenus",
+ "servicePrincipalRadioSelect": "Sélectionner des principaux du service",
+ "servicePrincipalSelectionsAria": "Grille des principaux du service sélectionnés",
+ "servicePrincipalSelectorAria": "Liste des principaux du service choisis",
+ "servicePrincipalSelectorMultiple": "{0} principaux du service sélectionnés",
+ "servicePrincipalSelectorSingle": "1 principal du service sélectionné",
+ "servicePrincipalSpecificExc": "Principaux de service spécifiques exclus",
+ "servicePrincipalSpecificInc": "Principaux du service spécifiques inclus",
+ "servicePrincipals": "Principaux du service",
+ "sessionControlBladeTitle": "Session",
+ "sessionControlDescriptionContent": "Contrôlez l’accès en fonction des contrôles de session pour activer des expériences limitées au sein d’applications cloud spécifiques.",
+ "sessionControlDisableInfo": "Ce contrôle fonctionne uniquement avec les applications prises en charge. Office 365, Exchange Online et SharePoint Online sont actuellement les seules applications cloud qui prennent en charge les restrictions appliquées par l’application. Cliquez ici pour en savoir plus.",
+ "sessionControlInfoBallonText": "Les contrôles de session permettent une expérience limitée au sein d'une application cloud.",
+ "sessionControls": "Contrôles de session",
+ "sessionControlsAppEnforcedLabel": "Utiliser les restrictions appliquées par l'application",
+ "sessionControlsCasLabel": "Utiliser le contrôle d'application par accès conditionnel",
+ "sessionControlsSecureSignInLabel": "Exiger une liaison de jeton",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} inclus",
+ "signinRiskReauth": "La condition « Risque de connexion » doit être sélectionnée lorsque le contrôle de session « Exiger l’authentification multifacteur » et la « fréquence de connexion à chaque fois » sont sélectionnés",
+ "signinRiskTriggerDescriptionContent": "Sélectionner le niveau de risque de connexion",
+ "singleTenantServicePrincipalInfoBallonText": "La stratégie s’applique uniquement aux principaux de service à locataire unique appartenant à votre organisation. Cliquez ici pour en savoir plus ",
+ "specificSigninRiskLevelsOption": "Sélectionner des niveaux de risque de connexion spécifiques",
+ "specificUsersExcluded": "utilisateurs spécifiques exclus",
+ "specificUsersIncluded": "Utilisateurs spécifiques inclus",
+ "specificUsersIncludedAndExcluded": "Utilisateurs spécifiques exclus et inclus",
+ "startDatePickerLabel": "Démarrages",
+ "startFreeTrial": "Démarrer un essai gratuit",
+ "startTimePickerLabel": "Heure de début",
+ "sunday": "Dimanche",
+ "testButton": "What If",
+ "thumbprintCol": "Empreinte numérique",
+ "thursday": "Jeudi",
+ "timeConditionAllTimesLabel": "À tout moment",
+ "timeConditionIntroText": "Configurer l'heure à laquelle cette stratégie s'applique",
+ "timeConditionSelectorInfoBallonContent": "Quand l'utilisateur se connecte. Par exemple, le « mercredi de 9 h à 17 h »",
+ "timeConditionSelectorLabel": "Heure (préversion)",
+ "timeConditionSpecificLabel": "Heures spécifiques",
+ "timeSelectorAllTimesText": "À tout moment",
+ "timeSelectorSpecificTimesText": "Heures spécifiques configurées",
+ "timeZoneDropdownInfoBalloonContent": "Sélectionnez un fuseau horaire qui définit l'intervalle de temps. Cette stratégie s'applique aux utilisateurs de tous les fuseaux horaires. Par exemple, le « mercredi de 9 h à 17 h » pour un utilisateur correspond au « mercredi de 10 h à 18 h » pour un utilisateur d'un autre fuseau horaire.",
+ "timeZoneDropdownLabel": "Fuseau horaire",
+ "timeZoneDropdownPlaceholderText": "Sélectionner un fuseau horaire",
+ "tooManyPoliciesDescription": "Seules les 50 premières stratégies sont affichées. Cliquez ici pour afficher toutes les stratégies.",
+ "tooManyPoliciesTitle": "Plus de 50 stratégies trouvées",
+ "trustedLocationStatusIconDescription": "L'emplacement est approuvé",
+ "trustedLocationStatusIconEnabled": "Icône d'état Approuvé",
+ "tuesday": "Mardi",
+ "uploadInBadState": "Impossible de charger le fichier spécifié.",
+ "upsellAppsDescription": "Exiger l’authentification multifacteur pour les applications sensibles en permanence ou uniquement en dehors du réseau de l’entreprise.",
+ "upsellAppsTitle": "Sécuriser les applications",
+ "upsellBannerText": "Obtenir une version d’évaluation Premium gratuite pour utiliser cette fonctionnalité",
+ "upsellDataDescription": "Exigez que l'appareil soit marqué comme conforme ou avec jointure Microsoft Entra hybride pour autoriser l'accès aux ressources de l'entreprise.",
+ "upsellDataTitle": "Sécuriser les données",
+ "upsellDescription": "L’accès conditionnel fournit le contrôle et la protection dont vous avez besoin pour protéger les données de votre entreprise, tout en offrant à vos utilisateurs une expérience qui leur permet de mieux travailler à partir de n’importe quel appareil. Par exemple, vous pouvez limiter l’accès depuis l’extérieur du réseau de société ou restreindre l’accès aux appareils qui répondent aux stratégies de conformité.",
+ "upsellRiskDescription": "Exiger une authentification multifacteur pour les événements à risque détectés par le système Machine Learning de Microsoft.",
+ "upsellRiskTitle": "Protéger contre les risques",
+ "upsellTitle": "Accès conditionnel",
+ "upsellWhyTitle": "Pourquoi utiliser l'accès conditionnel ?",
+ "userAppNoneOption": "Aucun",
+ "userNamePlaceholderText": "Entrez le nom d'utilisateur.",
+ "userNotSetSeletorLabel": "0 utilisateurs et groupes sélectionnés",
+ "userOnlySelectionBladeExcludeDescription": "Sélectionner les utilisateurs à exclure de la stratégie",
+ "userOrGroupSelectionCountDiffBannerText": "{0} configuré(s) dans cette stratégie a/ont été supprimé(s) du répertoire, mais cela n'affecte pas les autres utilisateurs et groupes dans la stratégie. La prochaine fois que vous mettrez à jour la stratégie, les utilisateurs et/ou les groupes supprimés seront supprimés automatiquement.",
+ "userOrSPNotSetSelectorLabel": "0 utilisateurs ou identités de charge de travail sélectionnés",
+ "userOrSPSelectionBladeTitle": "Utilisateurs ou identités de charge de travail",
+ "userOrSPSelectorInfoBallonText": "Identités de l’annuaire auxquelles s’applique la stratégie, notamment les utilisateurs, les groupes et les principaux du service",
+ "userRequired": "Utilisateur requis",
+ "userRiskErrorBox": "La condition « Risque utilisateur » doit être sélectionnée lorsque l’option « Exiger la modification du mot de passe » est sélectionnée",
+ "userRiskReauth": "La condition « Risque utilisateur » et non « Risque de connexion » doit être sélectionnée lorsque le contrôle de session « Exiger une modification du mot de passe » et « Fréquence de connexion à chaque fois » sont sélectionnés",
+ "userSPRequired": "Utilisateur ou principal de service requis",
+ "userSPSelectorTitle": "Identité de l’utilisateur ou de la charge de travail",
+ "userSelectionBladeAllUsersAndGroups": "Tous les utilisateurs et groupes",
+ "userSelectionBladeExcludeDescription": "Sélectionner les utilisateurs et groupes à exclure de la stratégie",
+ "userSelectionBladeExcludeTabTitle": "Exclure",
+ "userSelectionBladeExcludedSelectorTitle": "Sélectionner des utilisateurs et des groupes exclus",
+ "userSelectionBladeIncludeDescription": "Sélectionner les utilisateurs auxquels cette stratégie s’applique",
+ "userSelectionBladeIncludeTabTitle": "Inclure",
+ "userSelectionBladeIncludedSelectorTitle": "Sélectionner",
+ "userSelectionBladeSelectUsers": "Sélectionner les utilisateurs",
+ "userSelectionBladeSelectedUsers": "Sélectionner des utilisateurs et des groupes",
+ "userSelectionBladeTitle": "Utilisateurs et groupes",
+ "userSelectorBladeTitle": "Utilisateurs",
+ "userSelectorExcluded": "{0} exclu",
+ "userSelectorGroupPlural": "{0} groupes",
+ "userSelectorGroupSingular": "1 groupe",
+ "userSelectorIncluded": "{0} inclus",
+ "userSelectorInfoBallonText": "Utilisateurs et groupes du répertoire auquel la stratégie s'applique. Par exemple « groupe pilote »",
+ "userSelectorSelected": "{0} sélectionné(s)",
+ "userSelectorTitle": "Utilisateur",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} utilisateurs",
+ "userSelectorUserSingular": "1 utilisateur",
+ "userSelectorWithExclusion": "{0} et {1}",
+ "usersGroupsLabel": "Utilisateurs et groupes",
+ "viewApprovedAppsText": "Voir la liste des applications clientes approuvées",
+ "viewCompliantAppsText": "Voir la liste des applications clientes protégées par une stratégie",
+ "viewPolicyInformation": "Afficher les informations de stratégie",
+ "vpnBladeTitle": "Connectivité VPN",
+ "vpnCertCreateFailedMessage": "Erreur : {0}",
+ "vpnCertCreateFailedTitle": "Impossible de créer {0}",
+ "vpnCertCreateInProgressTitle": "Création de {0}",
+ "vpnCertCreateSuccessMessage": "{0} créé avec succès.",
+ "vpnCertCreateSuccessTitle": "{0} créé avec succès",
+ "vpnCertNoRowsMessage": "Aucun certificat VPN n'a été trouvé",
+ "vpnCertUpdateFailedMessage": "Erreur : {0}",
+ "vpnCertUpdateFailedTitle": "Échec de la mise à jour de {0}",
+ "vpnCertUpdateInProgressTitle": "Mise à jour de {0}",
+ "vpnCertUpdateSuccessMessage": "{0} mis à jour avec succès.",
+ "vpnCertUpdateSuccessTitle": "{0} mis à jour avec succès",
+ "vpnFeatureInfo": "Pour plus d’informations sur la connectivité VPN et l'accès conditionnel, cliquez ici.",
+ "vpnFeatureWarning": "Une fois qu'un certificat VPN a été créé dans le portail, Microsoft Entra ID commence à l'utiliser immédiatement pour émettre des certificats à courte durée vers le client VPN. Il est essentiel que le certificat VPN soit immédiatement déployé sur le serveur VPN pour éviter tout problème de validation des informations d'identification du client VPN.",
+ "vpnMenuText": "Connectivité VPN",
+ "vpncertDropdownDefaultOption": "Durée",
+ "vpncertDropdownInfoBalloonContent": "Sélectionnez la durée du certificat que vous souhaitez créer",
+ "vpncertDropdownLabel": "Sélectionner une durée",
+ "vpncertDropdownOneyearOption": "1 année",
+ "vpncertDropdownThreeyearOption": "3 années",
+ "vpncertDropdownTwoyearOption": "2 années",
+ "wednesday": "Mercredi",
+ "whatIfCountry": "Pays/région",
+ "whatIfCountryInfo": "Pays ou région où l'utilisateur se connecte.",
+ "whatIfDevicePlatformInfo": "Plateforme d'appareil depuis laquelle l'utilisateur se connecte.",
+ "whatIfEnterIpAddress": "Entrer l'adresse IP (par ex. : 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "Une adresse IP non valide a été spécifiée.",
+ "whatIfIpAddress": "Adresse IP",
+ "whatIfIpAddressInfo": "Adresse IP à partir de laquelle l'utilisateur se connecte.",
+ "whatIfIpCountryInfoBoxText": "Si vous utilisez l'adresse IP ou le pays/la région, les deux champs sont nécessaires et doivent être correctement mappés ensemble.",
+ "whatIfSelectCountry": "Sélectionner le pays ou la région...",
+ "whatIfSelectDevicePlatform": "Sélectionner la plateforme d'appareil...",
+ "whatIfSelectPrivateLink": "Sélectionner un lien privé...",
+ "whatIfSelectSignInRisk": "Sélectionner le risque de connexion...",
+ "whatIfSignInRisk": "Risque de connexion",
+ "whatIfSignInRiskInfo": "Niveau de risque associé à la connexion",
+ "whatIfUnknownAreas": "Zones inconnues",
+ "windows365InfoBox": "La sélection de Windows 365 va affecter les connexions aux PC Cloud et aux hôtes de session de bureau virtuel Azure. Cliquez ici pour en savoir plus.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Identités de charge de travail (préversion)",
+ "workloadIdentitiesLicenseText": "Une licence Premium P1 ou P2 d’identités de charge de travail est nécessaire pour modifier cette stratégie.",
+ "workloadIdentity": "Identité de la charge de travail"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Vue d'ensemble"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Recherchez par appareil, utilisateur ou version de mise à jour qualité."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Échec du chargement des profils de mise à jour logicielle iOS"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Profil de mise à jour iOS",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profil"
+ },
+ "listLoadError": "Impossible de charger les profils de mise à jour logicielle d'iOS. Réessayez plus tard",
+ "lowercase": "Stratégie de mise à jour iOS",
+ "uppercase": "Stratégie de mise à jour iOS"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Nous sommes désolés, car nous ne pouvons pas nous connecter à Apple pour obtenir la liste des versions disponibles. Réessayez plus tard ou passez à la dernière version.",
+ "latestUpdate": "Dernière mise à jour",
+ "noLongerSupported": "La version sélectionnée n'est plus prise en charge",
+ "olderVersionSelected": "Dans la mesure où vous avez sélectionné une version antérieure, veillez à appliquer une stratégie de restriction d’appareil qui diffère la visibilité des mises à jour logicielles pour que les appareils ne puissent pas effectuer de mise à jour vers la dernière version.",
+ "prefix": "Installer iOS/iPadOS",
+ "selectSupported": "Sélectionner la mise à jour de version prise en charge par Apple",
+ "updateToInstall": "Mise à jour à installer"
+ },
+ "Schedule": {
+ "always": "Mettre à jour au prochain check-in",
+ "duringTimeWindows": "Mettre à jour pendant l'intervalle planifié",
+ "header": "Par défaut, quand une stratégie de mises à jour est attribuée à un appareil, Intune déploie les dernières mises à jour au check-in de l’appareil. Au lieu de cela, vous pouvez créer une planification hebdomadaire avec des heures de début et de fin personnalisées. Si vous choisissez d’effectuer une mise à jour en dehors de l’intervalle planifié, Intune ne déploie pas les mises à jour avant la fin de l’intervalle planifié.",
+ "infoBalloon": "Quand les mises à jour seront effectuées. Une entrée supplémentaire est nécessaire pour planifier les mises à jour pendant ou en dehors des heures planifiées.",
+ "label": "Type de planification",
+ "outsideActiveHours": "Mise à jour en dehors des heures actives (héritées)",
+ "outsideTimeWindows": "Mettre à jour en dehors de l'intervalle planifié",
+ "timeWindow": "Fenêtre de temps",
+ "timeZone": "Fuseau horaire",
+ "title": "Paramètres de planification de la stratégie de mise à jour :",
+ "weekly": "Planification hebdomadaire",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "Version d’iOS/iPadOS à installer sur les appareils au moment de la mise à jour.",
+ "label": "Sélectionnez la version à installer"
+ },
+ "header": "Créez un profil pour forcer les appareils attribués à installer automatiquement les dernières mises à jour iOS/iPadOS. Ces paramètres déterminent quand et comment les mises à jour logicielles sont déployées. Ce profil n’empêche pas les utilisateurs de mettre à jour manuellement le système d’exploitation, ce qui peut être empêché pendant une période allant jusqu’à 90 jours avec la stratégie de restriction de la configuration d’appareils. Les mises à jour s’appliquent uniquement aux appareils supervisés.",
+ "notAvailable": "N/A"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Il n'existe aucune stratégie de mise à jour d'iOS à afficher",
+ "macOsUpdates": "Il n'existe aucune stratégie de mise à jour logicielle macOS à afficher",
+ "windowsUpdates": "Aucun anneau de mise à jour pour Windows 10 et versions ultérieures à afficher."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Nom de l'appareil",
+ "deviceUpdateStatus": "État de la mise à jour de l'appareil",
+ "lastUpdated": "Dernière mise à jour",
+ "osVersion": "Version du système d'exploitation",
+ "userPrincipalName": "Nom d'utilisateur"
+ },
+ "maximumOSVersionFilter": "Version maximale du système d'exploitation",
+ "minimumOSVersionFilter": "Version minimale du système d'exploitation",
+ "noData": "Aucune donnée à afficher",
+ "searchBoxPlaceholder": "Rechercher par nom d'appareil, nom d'utilisateur ou version de système d'exploitation",
+ "title": "Récapitulatif des comptes pour les appareils macOS"
+ },
+ "Category": {
+ "configurationDataFile": "Fichier de données de configuration",
+ "critical": "Critique",
+ "firmware": "BIOS",
+ "other": "Autre"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Dernière mise à jour",
+ "successfulUpdateCount": "Mises à jour déployées",
+ "totalUpdateCount": "Total de mises à jour déployées",
+ "updateCategory": "Catégorie de mise à jour",
+ "updateCategoryStatus": "État de la catégorie de mise à jour"
+ },
+ "noData": "Aucune donnée à afficher"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Échec du chargement des profils de mise à jour logicielle macOS"
+ }
+ },
+ "State": {
+ "available": "Disponibles",
+ "commandFailed": "Échec de la commande",
+ "downloadFailed": "Échec du téléchargement",
+ "downloadInsufficientNetwork": "Réseau insuffisant pour le téléchargement",
+ "downloadInsufficientPower": "Batterie insuffisante pour le téléchargement",
+ "downloadInsufficientSpace": "Espace insuffisant pour le téléchargement",
+ "downloaded": "Téléchargé",
+ "downloading": "Téléchargement",
+ "idle": "Inactif",
+ "installFailed": "L'installation a échoué",
+ "installInsufficientPower": "Batterie insuffisante pour l'installation",
+ "installInsufficientSpace": "Espace insuffisant pour l'installation",
+ "installing": "Installation",
+ "scheduled": "Planifiée",
+ "success": "Opération réussie",
+ "unknown": "Inconnu"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Dernière mise à jour",
+ "updateName": "Nom de la mise à jour",
+ "updateStatus": "État de la mise à jour",
+ "version": "Version"
+ },
+ "noData": "Aucune donnée à afficher",
+ "searchBoxPlaceholder": "Rechercher par nom ou version de mise à jour"
+ },
+ "SummaryBlade": {
+ "subtitle": "Profil de mise à jour de macOS",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profil"
+ },
+ "error": "Erreur",
+ "errorOrErrors": "Erreur(s)",
+ "errors": "Erreurs",
+ "listLoadError": "Impossible de charger les profils de mise à jour logicielle de macOS. Réessayez plus tard",
+ "lowercase": "Stratégie de mise à jour de macOS",
+ "other": "Autre",
+ "subtitle": "Mise à jour logicielle macOS",
+ "upToDate": "À jour",
+ "uppercase": "Stratégie de mise à jour de macOS"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Veuillez recommencer ultérieurement",
+ "title": "Échec de la suppression de {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Veuillez recommencer ultérieurement"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Veuillez recommencer ultérieurement",
+ "title": "Échec du chargement de {0}"
+ },
+ "idWrongFormat": "L’ID fourni pour le profil n’est pas au format attendu."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "Au moins une propriété doit être sélectionnée",
+ "tooMany": "Vous pouvez configurer un maximum de 20 fenêtres temporelles"
+ }
+ },
+ "endDay": "Jour de fin",
+ "endTime": "Heure de fin",
+ "startDay": "Jour de début",
+ "startTime": "Heure de début",
+ "timeWindowError": "Choisissez une fenêtre temporelle qui s’étend sur au moins une heure."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Échec du chargement des profils d’anneau de mise à jour pour Windows 10 et versions ultérieures."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Mettre à jour l’anneau pour Windows 10 et versions ultérieures",
+ "title": "Windows Update pour Entreprise"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 et ultérieur",
+ "title": "Mettre à jour l’anneau pour Windows 10 et versions ultérieures"
+ },
+ "listLoadError": "Impossible de charger les profils d’anneaux de mise à jour pour Windows 10 et versions ultérieures, réessayez plus tard",
+ "lowercase": "Anneau de mise à jour",
+ "uppercase": "Anneau de mise à jour"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Mettre à jour les paramètres de la stratégie",
+ "updateRingSettings": "Paramètres d'anneau de mise à jour"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Créer {0}",
+ "edit": "Modifier {0}"
+ }
+ },
+ "notScannedYet": "Pas encore analysé",
+ "outOfDateIosDevices": "Appareils iOS obsolètes"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge version 77 et ultérieure",
+ "storeApp": "Application du Store",
+ "office365Suite": "Applications Microsoft 365",
+ "microsoftDefenderATP": "Microsoft Defender pour point de terminaison",
+ "other": "Autre",
+ "webApplication": "Application web"
+ },
+ "Filters": {
+ "ruleSyntax": "Syntaxe de la règle",
+ "filters": "Filtres"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Sélectionnez un script de détection",
+ "scriptFileLabel": "Sélectionnez votre script de détection"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Quand cette option est activée, les appareils doivent être conformes aux règles personnalisées définies dans un fichier JSON en fonction des données personnalisées retournées par un script PowerShell de découverte.",
+ "label": "La conformité personnalisée est actuellement proposée en préversion. Lorsqu’elle deviendra généralement disponible, vous pourrez l’ajouter moyennant un coût supplémentaire aux options de licence qui incluent Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Script",
+ "placeholder": "Cliquez pour sélectionner",
+ "searchboxPlaceholder": "Rechercher par nom de script",
+ "title": "Sélectionner un script de détection"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Résumé des règles de conformité personnalisées"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Charger et valider le fichier JSON avec vos paramètres de conformité personnalisés",
+ "noFileSelectedError": "Sélectionnez un fichier JSON",
+ "parseFileSelectedError": "Le fichier JSON n’est pas valide"
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Configurez les critères de code PIN et d'informations d'identification que les utilisateurs doivent respecter pour pouvoir accéder aux applications dans un contexte de travail."
+ },
+ "DataProtection": {
+ "infoText": "Ce groupe comprend les contrôles de protection contre la perte de données (DLP), par exemple, les restrictions des opérations couper, copier, coller et enregistrer sous. Ces paramètres déterminent comment les utilisateurs interagissent avec les données dans l'application."
+ },
+ "DeviceTypes": {
+ "selectOne": "Sélectionnez au moins un type de périphérique."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Cibler les applications sur tous les types d'appareil"
+ },
+ "infoText": "Choisissez la façon dont vous souhaitez appliquer cette stratégie aux applications sur différents appareils. Ensuite, ajoutez au moins une application.",
+ "selectOne": "Sélectionnez au moins une application pour créer une stratégie."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender pour point de terminaison",
+ "androidDeviceOwnerApplications": "Applications",
+ "androidDeviceOwnerPolicyMessages": "Informations de support personnalisées",
+ "androidForWorkPassword": "Mot de passe de l'appareil",
+ "appManagement": "Autoriser ou bloquer des applications",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Applications restreintes",
+ "applicationVisibility": "Afficher ou masquer des applications",
+ "applications": "Magasin d'applications",
+ "applicationsAndGames": "App Store, affichage de documents, jeux",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Applications et expérience",
+ "associatedDomains": "Domaines associés",
+ "autonomousSingleAppMode": "Mode App individuelle autonome",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Chiffrement Windows",
+ "bootOptions": "Options de démarrage",
+ "browser": "Navigateur",
+ "builtinApps": "Applications intégrées",
+ "cameras": "Appareils photo",
+ "cellular": "Cellulaire",
+ "cloudAndStorage": "Cloud et stockage",
+ "cloudPrint": "Imprimante cloud",
+ "complianceEmailProfile": "E-mail",
+ "connectedDevices": "Appareils connectés",
+ "connectivity": "Mobile et connectivité",
+ "contentCaching": "Mise en cache du contenu",
+ "controlPanelAndSettings": "Panneau de configuration et paramètres",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Conformité personnalisée",
+ "customConfiguration": "Profil de configuration personnalisé",
+ "customOMASettings": "Paramètres OMA-URI personnalisés",
+ "customPreferences": "Fichier de préférences",
+ "dFCISecuritySettings": "Paramètres de sécurité",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Pare-feu Windows",
+ "defenderLocalSecurityOptions": "Options de sécurité locales de l'appareil",
+ "defenderSecurityCenter": "Microsoft Defender Security Center",
+ "deliveryOptimization": "Optimisation de livraison",
+ "derivedCredentialAuthenticationConfiguration": "Information d’identification dérivée",
+ "deviceExperience": "Expérience de l’appareil",
+ "deviceFirmwareConfigurationInterface": "Interface de configuration du microprogramme d'appareil",
+ "deviceGuard": "Microsoft Defender Application Control",
+ "deviceHealth": "Intégrité de l'appareil",
+ "devicePassword": "Mot de passe de l’appareil",
+ "deviceProperties": "Propriétés de l'appareil",
+ "deviceRestrictions": "Général",
+ "deviceSecurity": "Sécurité système",
+ "display": "Affichage",
+ "domainJoin": "Jonction de domaine",
+ "domains": "Domaines",
+ "edgeBrowser": "Ancienne version de Microsoft Edge (version 45 et antérieure)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Mode kiosque Microsoft Edge",
+ "editionUpgrade": "Mise à niveau d'édition",
+ "education": "Éducation",
+ "educationDeviceCerts": "Certificats d'appareil",
+ "educationStudentCerts": "Certificats d'étudiant",
+ "educationTakeATest": "Passer un test",
+ "educationTeacherCerts": "Certificats d'enseignant",
+ "emailProfile": "E-mail",
+ "enterpriseDataProtection": "Protection des informations Windows",
+ "extensibleSingleSignOn": "Extension d’application d’authentification unique",
+ "filevault": "FileVault",
+ "firewall": "Pare-feu",
+ "games": "Jeux",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Monitoring de l’intégrité",
+ "homeScreenLayout": "Disposition de l’écran d’accueil",
+ "iOSWallpaper": "Papier peint",
+ "importedPFX": "Certificat PKCS importé",
+ "iosDefenderAtp": "Microsoft Defender pour point de terminaison",
+ "iosKiosk": "Kiosque",
+ "kernelExtensions": "Extensions de noyau",
+ "keyboardAndDictionary": "Clavier et dictionnaire",
+ "kiosk": "Kiosque",
+ "kioskAndroidEnterprise": "Appareils dédiés",
+ "kioskConfiguration": "Kiosque",
+ "kioskConfigurationV2": "Kiosque",
+ "kioskWebBrowser": "Navigateur web kiosque",
+ "lockScreenMessage": "Message d’écran de verrouillage",
+ "lockedScreenExperience": "Expérience d'écran verrouillé",
+ "logging": "Création de rapports et télémétrie",
+ "loginItems": "Éléments de connexion",
+ "loginWindow": "Fenêtre de connexion",
+ "macDefenderAtp": "Microsoft Defender pour point de terminaison",
+ "maintenance": "Maintenance",
+ "malware": "Programme malveillant",
+ "messaging": "Messagerie",
+ "microphonesAndSpeakers": "Microphone et haut-parleurs",
+ "networkBoundary": "Limite réseau",
+ "networkProxy": "Proxy réseau",
+ "notifications": "Notifications de l’application",
+ "pKCS": "Certificat PKCS",
+ "password": "Mot de passe",
+ "personalProfile": "Profil personnel",
+ "personalization": "Personnalisation",
+ "policyOverride": "Remplacer la stratégie de groupe",
+ "ports": "Ports",
+ "powerSettings": "Paramètres d'alimentation",
+ "printer": "Imprimante",
+ "privacy": "Confidentialité",
+ "privacyPerApp": "Exceptions de confidentialité par application",
+ "privacyPreferences": "Préférences de confidentialité",
+ "projection": "Projection",
+ "radios": "Signaux radio",
+ "sCCMCompliance": "Conformité de Configuration Manager",
+ "sCEP": "Certificat SCEP",
+ "sCEPProperties": "Certificat SCEP",
+ "sMode": "Changement de mode (Windows Insider uniquement)",
+ "safari": "Safari",
+ "search": "Rechercher",
+ "session": "Session",
+ "sharedDevice": "iPad partagé",
+ "sharedPCAccountManager": "Appareil multi-utilisateur partagé",
+ "singleSignOn": "Authentification unique",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Paramètres",
+ "start": "Démarrer",
+ "systemExtensions": "Extensions système",
+ "systemSecurity": "Sécurité système",
+ "trustedCert": "Certificat approuvé",
+ "uEFIAccess": "Accès UEFI",
+ "updates": "Mises à jour",
+ "userRights": "Droits de l'utilisateur",
+ "usersAndAccounts": "Utilisateurs et comptes",
+ "vPN": "VPN de base",
+ "vPNApps": "VPN automatique",
+ "vPNAppsAndTrafficRules": "Règles de trafic et d'applications",
+ "vPNConditionalAccess": "Accès conditionnel",
+ "vPNConnectivity": "Connectivité",
+ "vPNDNSTriggers": "Paramètres DNS",
+ "vPNIKEv2": "Paramètres IKEv2",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Tunneling fractionné",
+ "vPNTrustedNetwork": "Détection des réseaux approuvés",
+ "wakeSettings": "Paramètres de sortie de veille",
+ "webContentFilter": "Filtre de contenu web",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender pour point de terminaison",
+ "windowsDefenderATP": "Microsoft Defender pour point de terminaison",
+ "windowsHelloForBusiness": "Windows Hello Entreprise",
+ "windowsSpotlight": "Windows à la une",
+ "wiredNetwork": "Réseau câblé",
+ "wireless": "Sans fil",
+ "wirelessProjection": "Projection sans fil",
+ "workProfile": "Paramètres du profil professionnel",
+ "workProfilePassword": "Mot de passe du profil professionnel",
+ "xboxServices": "Services Xbox",
+ "zebraMx": "Profil MX (Zebra uniquement)",
+ "complianceActionsLabel": "Actions en cas de non-conformité"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "URL autorisées",
+ "tooltip": "Spécifiez les sites auxquels vos utilisateurs peuvent accéder dans leur contexte de travail. Aucun autre site n'est autorisé. Vous pouvez choisir de configurer une liste autorisée ou bloquée, mais pas les deux."
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Proxy d'application",
+ "title": "Redirection du proxy d'application",
+ "tooltip": "Activez la redirection du proxy d'application pour permettre aux utilisateurs d'accéder aux liens d'entreprise et aux applications web locales."
+ },
+ "BlockedURLs": {
+ "title": "URL bloquées",
+ "tooltip": "Spécifiez les sites auxquels vos utilisateurs ne peuvent pas accéder dans leur contexte de travail. Tous les autres sites sont autorisés. Vous pouvez choisir de configurer une liste autorisée ou bloquée, mais pas les deux. "
+ },
+ "Bookmarks": {
+ "header": "Signets gérés",
+ "tooltip": "Entrez une liste d'URL avec signet que vos utilisateurs peuvent utiliser dans Microsoft Edge dans leur contexte de travail.",
+ "uRL": "URL"
+ },
+ "HomepageURL": {
+ "header": "Page d'accueil gérée",
+ "title": "URL du raccourci de page d'accueil",
+ "tooltip": "Configurez un raccourci de page d'accueil représenté par la première icône sous la barre de recherche quand les utilisateurs ouvrent un nouvel onglet dans Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Rediriger les sites restreints vers un contexte personnel",
+ "tooltip": "Configurez s'il faut autoriser les utilisateurs à basculer sur leur contexte personnel pour ouvrir les sites restreints."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Référence Windows Famille",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Sélectionnez le nombre de bits contenus dans la clé.",
- "keyUsage": "Spécifiez l'action de chiffrement obligatoire pour échanger la clé publique du certificat.",
- "renewalThreshold": "Entrez le pourcentage (entre 1 et 99) de durée de vie restante du certificat avant qu'un appareil demande le renouvellement du certificat. La valeur recommandée dans Intune est 20 %. (1-99)",
- "rootCert": "Choisissez un profil de certificat d'autorité de certification racine précédemment configuré et affecté. Le certificat d'autorité de certification doit correspondre au certificat racine de l'autorité de certification qui émet le certificat pour ce profil (celui que vous configurez).",
- "scepServerUrl": "Entrez l’URL du serveur NDES qui émet les certificats via SCEP (Doit être HTTPS). Par ex., https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Ajoutez une ou plusieurs URL pour le serveur NDES qui émet des certificats par SCEP (doit être en HTTPS). Par ex. https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Autre nom de l'objet",
- "subjectNameFormat": "Format du nom de l'objet",
- "validityPeriod": "Quantité de temps restante avant l'expiration du certificat. Entrez une valeur égale ou inférieure à la période de validité affichée dans le modèle de certificat. La valeur par défaut est égale à un an."
- },
- "appInstallContext": "Cette option spécifie le contexte d'installation à associer à cette application. Pour les applications en mode double, sélectionnez le contexte souhaité pour l'application. Pour toutes les autres applications, le contexte est présélectionné selon le package et n'est pas modifiable.",
- "autoUpdateMode": "Configurez la priorité de mise à jour de l’application. Sélectionnez Par défaut pour exiger que l’appareil soit connecté au Wi-Fi, qu’il soit en charge et qu’il ne soit pas activement utilisé avant la mise à jour de l’application. Sélectionnez Priorité élevée pour mettre à jour l’application dès que le développeur a publié l’application, quel que soit l’état de charge, la capacité Wi-Fi ou l’activité de l’utilisateur final sur l’appareil. Sélectionnez Reporté pour renoncer aux mises à jour de l’application pendant 90 jours maximum. La haute priorité et le différé ne prendront effet que sur les appareils DO.",
- "configurationSettingsFormat": "Texte du format des paramètres de configuration",
- "ignoreVersionDetection": "Définissez cette valeur sur \"Oui\" pour les applications automatiquement mises à jour par le développeur de l'application (comme Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Sélectionnez « Oui » pour les applications qui sont automatiquement mises à jour par le développeur d’applications ou pour vérifier uniquement l’ID de bundle d’application avant l’installation. Sélectionnez « Non » pour vérifier l’ID de bundle d’application et le numéro de version avant l’installation.",
- "installAsManagedMacOSLobApp": "Ce paramètre s’applique uniquement à macOS 11 et versions ultérieures. L’application sera installée, mais elle ne sera pas managée sur macOS 10.15 et versions antérieures.",
- "installContextDropdown": "Sélectionnez le contexte d'installation approprié. Le contexte utilisateur installe l'application uniquement pour l'utilisateur ciblé, alors que le contexte d'appareil installe l'application pour tous les utilisateurs sur l'appareil.",
- "ldapUrl": "Il s’agit du nom d’hôte LDAP où les clients peuvent obtenir les clés de chiffrement publiques pour les destinataires des e-mails. Les e-mails seront chiffrés quand une clé sera disponible. Formats pris en charge :
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Sélectionnez les autorisations d'exécution pour l'application associée.",
- "policyAssociatedApp": "Sélectionnez l'application à laquelle cette stratégie va être associée.",
- "policyConfigurationSettings": "Sélectionnez la méthode à utiliser pour définir les paramètres de configuration de cette stratégie.",
- "policyDescription": "Éventuellement, entrez une description pour cette stratégie de configuration.",
- "policyEnrollmentType": "Indiquez si ces paramètres sont gérés par le biais de la gestion des appareils ou d'applications créées avec le SDK Intune.",
- "policyName": "Entrez un nom pour cette stratégie de configuration.",
- "policyPlatform": "Sélectionnez la plateforme à laquelle cette stratégie de configuration d'application va être appliquée.",
- "policyProfileType": "Sélectionnez les types de profils d’appareil auxquels ce profil de configuration d’application doit s’appliquer",
- "policySMime": "Configurez les paramètres de chiffrement et de signature S/MIME pour Outlook.",
- "sMimeDeployCertsFromIntune": "Spécifiez si les certificats S/MIME seront fournis par Intune pour une utilisation avec Outlook.\r\nIntune peut déployer automatiquement les certificats de signature et de chiffrement aux utilisateurs par le biais du portail d'entreprise.",
- "sMimeEnable": "Indiquer si les contrôles S/MIME sont activés au moment de la composition d'un e-mail",
- "sMimeEnableAllowChange": "Indiquez si l'utilisateur est autorisé à changer le paramètre Activer S/MIME.",
- "sMimeEncryptAllEmails": "Spécifiez si tous les e-mails doivent être chiffrés.\r\nLe chiffrement convertit les données en texte chiffré que seul le destinataire visé peut lire.",
- "sMimeEncryptAllEmailsAllowChange": "Indiquez si l'utilisateur est autorisé à changer le paramètre Chiffrer tous les e-mails.",
- "sMimeEncryptionCertProfile": "Spécifiez le profil de certificat pour le chiffrement d'e-mail.",
- "sMimeSignAllEmails": "Spécifiez si tous les e-mails doivent être signés.\r\nUne signature numérique vérifie l'authenticité de l'e-mail et garantit que le contenu n'est pas falsifié en transit.",
- "sMimeSignAllEmailsAllowChange": "Indiquez si l'utilisateur est autorisé à changer le paramètre Signer tous les e-mails.",
- "sMimeSigningCertProfile": "Spécifiez le profil de certificat pour la signature d'e-mail.",
- "sMimeUserNotificationType": "Méthode notifiant les utilisateurs qu'ils doivent ouvrir le portail d'entreprise pour récupérer les certificats S/MIME pour Outlook."
- },
+ "Languages": {
+ "ar-aE": "Arabe (E.A.U.)",
+ "ar-bH": "Arabe (Bahreïn)",
+ "ar-dZ": "Arabe (Algérie)",
+ "ar-eG": "Arabe (Égypte)",
+ "ar-iQ": "Arabe (Irak)",
+ "ar-jO": "Arabe (Jordanie)",
+ "ar-kW": "Arabe (Koweït)",
+ "ar-lB": "Arabe (Liban)",
+ "ar-lY": "Arabe (Libye)",
+ "ar-mA": "Arabe (Maroc)",
+ "ar-oM": "Arabe (Oman)",
+ "ar-qA": "Arabe (Qatar)",
+ "ar-sA": "Arabe (Arabie saoudite)",
+ "ar-sY": "Arabe (Syrie)",
+ "ar-tN": "Arabe (Tunisie)",
+ "ar-yE": "Arabe (Yémen)",
+ "az-cyrl": "Azéri (cyrillique, Azerbaïdjan)",
+ "az-latn": "Azéri (latin, Azerbaïdjan)",
+ "bn-bD": "Bengali (Bangladesh)",
+ "bn-iN": "Bengali (Inde)",
+ "bs-cyrl": "Bosniaque (cyrillique)",
+ "bs-latn": "Bosniaque (latin)",
+ "zh-cN": "Chinois (République populaire de Chine)",
+ "zh-hK": "Chinois (R.A.S. de Hong-Kong)",
+ "zh-mO": "Chinois (Macao R.A.S.)",
+ "zh-sG": "Chinois (Singapour)",
+ "zh-tW": "Chinois (Taïwan)",
+ "hr-bA": "Croate (Latin)",
+ "hr-hR": "Croate (Croatie)",
+ "nl-bE": "Néerlandais (Belgique)",
+ "nl-nL": "Néerlandais (Pays-Bas)",
+ "en-aU": "Anglais (Australie)",
+ "en-bZ": "Anglais (Belize)",
+ "en-cA": "Anglais (Canada)",
+ "en-cabn": "Anglais (Caraïbes)",
+ "en-iE": "Anglais (Irlande)",
+ "en-iN": "Anglais (Inde)",
+ "en-jM": "Anglais (Jamaïque)",
+ "en-mY": "Anglais (Malaisie)",
+ "en-nZ": "Anglais (Nouvelle-Zélande)",
+ "en-pH": "Anglais (Philippines)",
+ "en-sG": "Anglais (Singapour)",
+ "en-tT": "Anglais (Trinité-et-Tobago)",
+ "en-uK": "Anglais (Royaume-Uni)",
+ "en-uS": "Anglais (États-Unis)",
+ "en-zA": "Anglais (Afrique du Sud)",
+ "en-zW": "Anglais (Zimbabwe)",
+ "fr-bE": "Français (Belgique)",
+ "fr-cA": "Français (Canada)",
+ "fr-cH": "Français (Suisse)",
+ "fr-fR": "Français (France)",
+ "fr-lU": "Français (Luxembourg)",
+ "fr-mC": "Français (Monaco)",
+ "de-aT": "Allemand (Autriche)",
+ "de-cH": "Allemand (Suisse)",
+ "de-dE": "Allemand (Allemagne)",
+ "de-lI": "Allemand (Liechtenstein)",
+ "de-lU": "Allemand (Luxembourg)",
+ "iu-cans": "Inuktitut (syllabique, Canada)",
+ "iu-latn": "Inuktitut (latin, Canada)",
+ "it-cH": "Italien (Suisse)",
+ "it-iT": "Italien (Italie)",
+ "ms-bN": "Malais (Brunéi Darussalam)",
+ "ms-mY": "Malais (Malaisie)",
+ "mn-cN": "Mongol (mongol traditionnel, RPC)",
+ "mn-mN": "Mongol (cyrillique, Mongolie)",
+ "no-nB": "Norvégien, Bokmål (Norvège)",
+ "no-nn": "Norvégien, Nynorsk (Norvège)",
+ "pt-bR": "Portugais (Brésil)",
+ "pt-pT": "Portugais (Portugal)",
+ "quz-bO": "Quechua (Bolivie)",
+ "quz-eC": "Quechua (Équateur)",
+ "quz-pE": "Quechua (Pérou)",
+ "smj-nO": "Same de Lule (Norvège)",
+ "smj-sE": "Same de Lule (Suède)",
+ "se-fI": "Same du Nord (Finlande)",
+ "se-nO": "Same du Nord (Norvège)",
+ "se-sE": "Same du Nord (Suède)",
+ "sma-nO": "Same du Sud (Norvège)",
+ "sma-sE": "Same du Sud (Suède)",
+ "smn": "Same d'Inari (Finlande)",
+ "sms": "Same de Skolt (Finlande)",
+ "sr-Cyrl-bA": "Serbe (cyrillique)",
+ "sr-Cyrl-rS": "Serbe (Cyrillique, Serbie et Monténégro (anciennement))",
+ "sr-Latn-bA": "Serbe (Latin)",
+ "sr-Latn-rS": "Serbe (latin, Serbie)",
+ "dsb": "Bas-sorabe (Allemagne)",
+ "hsb": "Haut-sorabe (Allemagne)",
+ "es-es-tradnl": "Espagnol (Espagne, Traditionnel)",
+ "es-aR": "Espagnol (Argentine)",
+ "es-bO": "Espagnol (Bolivie)",
+ "es-cL": "Espagnol (Chili)",
+ "es-cO": "Espagnol (Colombie)",
+ "es-cR": "Espagnol (Costa Rica)",
+ "es-dO": "Espagnol (République dominicaine)",
+ "es-eC": "Espagnol (Équateur)",
+ "es-eS": "Espagnol (Espagne)",
+ "es-gT": "Espagnol (Guatemala)",
+ "es-hN": "Espagnol (Honduras)",
+ "es-mX": "Espagnol (Mexique)",
+ "es-nI": "Espagnol (Nicaragua)",
+ "es-pA": "Espagnol (Panama)",
+ "es-pE": "Espagnol (Pérou)",
+ "es-pR": "Espagnol (Porto Rico)",
+ "es-pY": "Espagnol (Paraguay)",
+ "es-sV": "Espagnol (Salvador)",
+ "es-uS": "Espagnol (États-Unis)",
+ "es-uY": "Espagnol (Uruguay)",
+ "es-vE": "Espagnol (Venezuela)",
+ "sv-fI": "Suédois (Finlande)",
+ "uz-cyrl": "Ouzbek (cyrillique, Ouzbékistan)",
+ "uz-latn": "Ouzbek (latin, Ouzbékistan)",
+ "af": "Afrikaans (Afrique du Sud)",
+ "sq": "Albanais (Albanie)",
+ "am": "Amharique (Éthiopie)",
+ "hy": "Arménien (Arménie)",
+ "as": "Assamais (Inde)",
+ "ba": "Bachkir (Russie)",
+ "eu": "Basque (Basque)",
+ "be": "Biélorusse (Bélarus)",
+ "br": "Breton (France)",
+ "bg": "Bulgare (Bulgarie)",
+ "ca": "Catalan (Catalan)",
+ "co": "Corse (France)",
+ "cs": "Tchèque (République tchèque)",
+ "da": "Danois (Danemark)",
+ "dv": "Maldivien (Maldives)",
+ "et": "Estonien (Estonie)",
+ "fo": "Féroïen (Îles Féroé)",
+ "fil": "Filipino (Philippines)",
+ "fi": "Finnois (Finlande)",
+ "gl": "Galicien (Galicien)",
+ "ka": "Géorgien (Géorgie)",
+ "el": "Grec (Grèce)",
+ "gu": "Goudjrati (Inde)",
+ "ha": "Haoussa (latin, Nigéria)",
+ "he": "Hébreu (Israël)",
+ "hi": "Hindi (Inde)",
+ "hu": "Hongrois (Hongrie)",
+ "is": "Islandais (Islande)",
+ "ig": "Igbo (Nigéria)",
+ "id": "Indonésien (Indonésie)",
+ "ga": "Irlandais (Irlande)",
+ "xh": "Xhosa (Afrique du Sud)",
+ "zu": "Zoulou (Afrique du Sud)",
+ "ja": "Japonais (Japon)",
+ "kn": "Kannada (Inde)",
+ "kk": "Kazakh (Kazakhstan)",
+ "km": "Khmer (Cambodge)",
+ "rw": "Kinyarwanda (Rwanda)",
+ "sw": "Swahili (Kenya)",
+ "kok": "Konkani (Inde)",
+ "ko": "Coréen (Corée)",
+ "ky": "Kirghize (Kirghizistan)",
+ "lo": "Lao (RDP Lao)",
+ "lv": "Letton (Lettonie)",
+ "lt": "Lituanien (Lituanie)",
+ "lb": "Luxembourgeois (Luxembourg)",
+ "mk": "Macédonien (Macédoine du Nord)",
+ "ml": "Malayalam (Inde)",
+ "mt": "Maltais (Malte)",
+ "mi": "Maori (Nouvelle-Zélande)",
+ "mr": "Marathi (Inde)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Népalais (Népal)",
+ "oc": "Occitan (France)",
+ "or": "Odia (Inde)",
+ "ps": "Pachto (Afghanistan)",
+ "fa": "Persan",
+ "pl": "Polonais (Pologne)",
+ "pa": "Pendjabi (Inde)",
+ "ro": "Roumain (Roumanie)",
+ "rm": "Romanche (Suisse)",
+ "ru": "Russe (Russe)",
+ "sa": "Sanscrit (Inde)",
+ "st": "Sotho du Nord (Afrique du Sud)",
+ "tn": "Setswana (Afrique du Sud)",
+ "si": "Cingalais (Sri Lanka)",
+ "sk": "Slovaque (Slovaquie)",
+ "sl": "Slovène (Slovénie)",
+ "sv": "Suédois (Suède)",
+ "syr": "Syriaque (Syrie)",
+ "tg": "Tadjik (cyrillique, Tadjikistan)",
+ "ta": "Tamoul (Inde)",
+ "tt": "Tatar (Russie)",
+ "te": "Télougou (Inde)",
+ "th": "Thaï (Thaïlande)",
+ "bo": "Tibétain (RPC)",
+ "tr": "Turc (Turquie)",
+ "tk": "Turkmène (Turkménistan)",
+ "uk": "Ukrainien (Ukraine)",
+ "ur": "Ourdou (Pakistan)",
+ "vi": "Vietnamien (Vietnam)",
+ "cy": "Gallois (Royaume-Uni)",
+ "wo": "Wolof (Sénégal)",
+ "ii": "Yi (RPC)",
+ "yo": "Yoruba (Nigéria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Rôle intégré",
+ "customCloudPCRole": "Rôle Windows 365 personnalisé",
+ "customIntuneRole": "Rôle Intune personnalisé",
+ "customRole": "Rôle personnalisé"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "Version de l’application",
+ "dependencyName": "Nom de la dépendance",
+ "lastModifiedTime": "Heure de la dernière modification",
+ "relationship": "Relation",
+ "replaced": "Remplacé",
+ "searchPlaceholder": "Filtrer par nom d'application",
+ "status": "Détails du statut",
+ "statusDetails": "État",
+ "supersedenceName": "Nom de remplacement"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Dépendance enfant",
+ "indirectSupersedence": "Pas directement lié",
+ "supersedenceAncestors": "Nombre de remplacement",
+ "supersedenceDescendants": "Remplacé"
+ },
+ "SupersededReplaced": {
+ "no": "Non",
+ "yes": "Oui"
+ },
+ "Tabs": {
+ "chart": "Graphique",
+ "dependency": "Dépendance",
+ "label": "Afficher : ",
+ "supersedence": "Remplacement",
+ "table": "Table"
+ },
+ "dependencyGraphAriaLabel": "Tableau de dépendance des applications",
+ "supersedenceGraphAriaLabel": "Graphique de remplacement d'application"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Nombre de jours à attendre avant l’application du redémarrage"
+ },
+ "Description": {
+ "label": "Description"
+ },
+ "Name": {
+ "label": "Nom"
+ },
+ "QualityUpdateRelease": {
+ "label": "Accélérez l’installation des mises à jour qualité si la version du système d’exploitation de l’appareil est inférieure à :"
+ },
+ "bladeTitle": "Mises à jour qualité Windows 10 et versions ultérieures (préversion)",
+ "loadError": "Échec du chargement !"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Paramètres"
+ },
+ "infoBoxText": "Le seul contrôle de mise à jour qualité dédié, qui n’est actuellement pas la stratégie d’anneau de mise à jour existante pour Windows 10 et versions ultérieures, permet d’accélérer les mises à jour qualité pour les appareils qui sont au-dessus d’un niveau de correctif spécifié. Des contrôles supplémentaires seront disponibles à l’avenir.",
+ "licenseLearnMoreText": "En savoir plus sur les conditions préalables et les stratégies de mise à jour qualité.",
+ "licenseWarningBoxText": "La création de stratégies de mise à jour qualité nécessite une licence spécifique.",
+ "warningBoxText": "Alors que l’accélération des mises à jour logicielles peut contribuer à réduire la durée de la mise en conformité lorsque cela est nécessaire, cela a un impact plus grand sur la productivité de l’utilisateur final. La probabilité que ce dernier subisse un redémarrage pendant les heures de bureau est considérablement plus élevée."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "Sur Android, vous pouvez autoriser l'utilisation de l'identification par empreintes digitales au lieu d'un code confidentiel. Les utilisateurs sont invités à fournir leurs empreintes digitales lorsqu'ils accèdent à cette application avec leurs comptes professionnels.",
+ "iOS": "Sur les appareils iOS/iPadOS, vous pouvez autoriser l’identification par empreinte digitale au lieu du code confidentiel. Les utilisateurs sont alors invités à fournir leur empreinte digitale quand ils accèdent à cette application avec leur compte professionnel.",
+ "mac": "Sur les appareils Mac, vous pouvez autoriser une empreinte digitale à la place d'un code PIN pour s'identifier. Les utilisateurs sont alors invités à fournir leur empreinte digitale quand ils accèdent à cette application avec leur compte professionnel."
+ },
+ "allowWidgetContentSync": "Choisissez Bloquer pour empêcher les applications gérées par la stratégie d’enregistrer des données dans les widgets d’application. Si vous choisissez Autoriser, l’application gérée par des règles peut enregistrer des données dans les widgets de l’application, si ces fonctions sont prises en charge et activées dans l’application gérée par une stratégie. \r\n\r\n \r\n\r\nLes applications peuvent fournir des fonctionnalités de configuration supplémentaires avec des stratégies de configuration d’application. Pour plus d’informations, consultez la documentation de l’application.",
+ "appSharingFromLevel1": "Sélectionnez l'une des options suivantes pour spécifier les applications à partir desquelles cette application peut recevoir des données :",
+ "appSharingFromLevel2": "{0} : Autoriser uniquement la réception de données de documents ou comptes d'organisation provenant d'autres applications gérées par stratégie",
+ "appSharingFromLevel3": "{0} : Autoriser la réception de données de documents ou comptes d'organisation provenant de n'importe quelle application",
+ "appSharingFromLevel4": "{0} : Ne pas autoriser la réception de données de documents ou comptes d'organisation provenant d'une autre application",
+ "appSharingFromLevel5": "{0} : Autoriser le transfert de données à partir de n'importe quelle application et traiter toutes les données entrantes sans identité utilisateur comme données de l'organisation.",
+ "appSharingToLevel1": "Sélectionnez l'une des options suivantes pour spécifier les applications auxquelles cette application peut envoyer des données :",
+ "appSharingToLevel2": "{0} : Autoriser uniquement l'envoi de données d'organisation à d'autres applications gérées par stratégie",
+ "appSharingToLevel3": "{0} : Autoriser l'envoi de données d'organisation à n'importe quelle application",
+ "appSharingToLevel4": "{0} : Ne pas autoriser l'envoi de données d'organisation à une autre application",
+ "appSharingToLevel5": "{0} : Autoriser le transfert uniquement vers d'autres applications gérées par une stratégie et le transfert de fichiers vers d'autres applications gérées par MDM sur des appareils inscrits",
+ "appSharingToLevel6": "{0} : Autoriser le transfert uniquement vers d'autres applications gérées par une stratégie et filtrer les boîtes de dialogue Ouvrir dans/Partager pour afficher uniquement les applications gérées par une stratégie",
+ "assignmentFilterEdit1": "Si vous appliquez des filtres d’affectation à cette stratégie, la propriété « type Gestion des appareils » s’applique en plus des valeurs spécifiées pour « Cibler les applications sur tous les types d’appareils » et « Types d’appareils » dans la page « Applications ».",
+ "assignmentFilterEdit2": "En savoir plus sur l’attribution de stratégies de protection des applications.",
+ "conditionalEncryption1": "Sélectionnez {0} pour désactiver le chiffrement de l'application pour le stockage d'applications interne quand le chiffrement de l'appareil est détecté sur un appareil inscrit.",
+ "conditionalEncryption2": "Remarque : Intune peut détecter l'inscription des appareils uniquement avec Intune MDM. Le stockage d'applications externe reste chiffré pour que les applications non gérées ne puissent pas accéder aux données.",
+ "contactSyncMac": "Si cette option est désactivée, les applications ne peuvent pas enregistrer de contacts dans le carnet d'adresses natif.",
+ "contactsSync": "Choisissez Bloquer pour empêcher les applications gérées par la stratégie d’enregistrer des données dans les applications natives de l’appareil (comme les contacts, le calendrier et les widgets) ou pour empêcher l’utilisation de compléments dans les applications gérées par la stratégie. Si vous choisissez Autoriser, l’application gérée par stratégie peut enregistrer des données dans les applications natives ou utiliser des compléments, si ces fonctionnalités sont prises en charge et activées dans l’application gérée par stratégie.
Les applications peuvent fournir une capacité de configuration supplémentaire avec des stratégies de configuration d’application. Pour plus d’informations, consultez la documentation de l’application.",
+ "deviceTypeTargetingCreate1": "Le ciblage du type d’appareil a été déplacé vers l’étape Affectations de la création de stratégie.",
+ "deviceTypeTargetingEdit1": "Si vous appliquez des filtres d’affectation à cette stratégie, la propriété « type Gestion des appareils » s’applique en plus des valeurs spécifiées pour « Cibler les applications sur tous les types d’appareils » et « Types d’appareils » dans la page « Applications ».",
+ "deviceTypeTargetingEdit2": "Pour modifier le ciblage du type de gestion des appareils, réinitialisez « Cibler sur les applications sur tous les types d’appareils » = « Oui ». Créez ensuite un filtre d’affectation MAM avec les valeurs souhaitées pour « Gestion des appareils Type ».",
+ "deviceTypeTargetingHasMoved": "En savoir plus sur l’attribution de stratégies de protection des applications",
+ "encryptionAndroid1": "Pour les applications associées à une stratégie de gestion des applications mobiles Intune, le chiffrement est fourni par Microsoft. Les données sont chiffrées de manière synchrone pendant les opérations d'E/S selon le paramètre de la stratégie de gestion des applications mobiles. Les applications gérées sur Android utilisent le chiffrement AES-128 en mode CBC qui utilise les bibliothèques de chiffrement de la plateforme. La méthode de chiffrement n'est pas conforme à FIPS 140-2. Le chiffrement SHA-256 est pris en charge sous forme d'instruction explicite à l'aide du paramètre SigAlg et fonctionne uniquement sur des appareils version 4.2 ou ultérieure. Le contenu stocké sur l'appareil est toujours chiffré.",
+ "encryptionAndroid2": "Quand vous demandez le chiffrement dans votre stratégie d'application, l'utilisateur final est invité à configurer et utiliser un code confidentiel pour accéder à son appareil. Si aucun code confidentiel n'est configuré pour accéder à l'appareil, les applications ne sont pas lancées et un message s'affiche indiquant à l'utilisateur final : « Votre entreprise exige que vous activiez d'abord un code confidentiel sur l'appareil pour accéder à cette application ».",
+ "encryptionMac1": "Pour les applications associées à une stratégie de gestion des applications mobiles Intune, le chiffrement est fourni par Microsoft. Les données sont chiffrées de manière synchrone pendant les opérations d'E/S selon le paramètre de la stratégie de gestion des applications mobiles. Les applications gérées sur Mac utilisent le chiffrement AES-128 en mode CBC qui utilise les bibliothèques de chiffrement de la plateforme. La méthode de chiffrement n'est pas conforme à FIPS 140-2. Le chiffrement SHA-256 est pris en charge sous forme d'instruction explicite à l'aide du paramètre SigAlg et fonctionne uniquement sur des appareils version 4.2 et ultérieure. Le contenu stocké sur l'appareil est toujours chiffré.",
+ "faceId1": "Dans certains cas, vous pouvez utiliser l'identification du visage à la place d'un code PIN. Quand les utilisateurs accèdent à cette application à l'aide de leur compte professionnel, ils sont invités à fournir une identification de leur visage.",
+ "faceId2": "Sélectionnez Oui pour utiliser l'identification du visage à la place d'un code PIN afin d'accéder aux applications.",
+ "managementLevelsAndroid1": "Utilisez cette option pour indiquer si cette stratégie s’applique aux appareils des administrateurs d’appareils Android, aux appareils professionnels Android ou aux appareils non gérés.",
+ "managementLevelsAndroid2": "{0} : Les appareils non gérés sont des appareils sur lesquels la gestion Intune MDM n'a pas été détectée. Inclut les fournisseurs MDM tiers.",
+ "managementLevelsAndroid3": "{0} : appareils gérés par Intune utilisant l’API d’administration d’appareils Android.",
+ "managementLevelsAndroid4": "{0} : appareils gérés par Intune utilisant les profils de travail Android Enterprise ou la gestion complète des appareils Android Enterprise.",
+ "managementLevelsIos1": "Utilisez cette option pour spécifier si cette stratégie s'applique aux appareils gérés par MDM ou aux appareils non gérés.",
+ "managementLevelsIos2": "{0} : Les appareils non gérés sont des appareils sur lesquels la gestion Intune MDM n'a pas été détectée. Inclut les fournisseurs MDM tiers.",
+ "managementLevelsIos3": "{0} : Les appareils gérés sont gérés par Intune MDM.",
+ "minAppVersion": "Définissez le numéro de version d'application minimal requis qu'un utilisateur doit avoir pour profiter d'un accès sécurisé à l'application.",
+ "minAppVersionWarning": "Définissez le numéro de version d'application minimal conseillé qu'un utilisateur doit avoir pour un accès sécurisé à l'application.",
+ "minOsVersion": "Définissez le numéro de version de système d'exploitation minimal requis qu'un utilisateur doit avoir pour profiter d'un accès sécurisé à l'application.",
+ "minOsVersionWarning": "Définissez le numéro de version de système d'exploitation minimal conseillé qu'un utilisateur doit avoir pour profiter d'un accès sécurisé à l'application.",
+ "minPatchVersion": "Définissez le niveau le plus ancien de correctif de sécurité Android obligatoire qu'un utilisateur doit avoir pour obtenir un accès sécurisé à l'application.",
+ "minPatchVersionWarning": "Définissez le niveau le plus ancien de correctif de sécurité Android recommandé qu'un utilisateur doit avoir pour obtenir un accès sécurisé à l'application.",
+ "minSdkVersion": "Définissez la version du SDK Stratégie de protection des applications minimale requise qu'un utilisateur doit avoir pour profiter d'un accès sécurisé à l'application.",
+ "requireAppPinDefault": "
Sélectionnez Oui pour désactiver le code PIN de l'application quand un verrouillage d'appareil est détecté sur un appareil inscrit.
",
+ "targetAllApps1": "Utilisez cette option pour cibler votre stratégie aux applications sur les appareils, peu importe leur état de gestion.",
+ "targetAllApps2": "Durant la résolution des conflits de stratégie, ce paramètre est remplacé si une stratégie d'utilisateur cible un état de gestion spécifique.",
+ "touchId2": "Sélectionnez {0} pour demander une identification par empreinte digitale au lieu d'un code confidentiel pour accéder à l'application."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Spécifiez le nombre de jours avant la réinitialisation obligatoire du code PIN par l'utilisateur.",
+ "previousPinBlockCount": "Ce paramètre spécifie le nombre de codes secrets précédents que Intune va maintenir. Les nouveaux codes secrets doivent être différents de ceux que Intune maintient actuellement."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Cela permet à Windows Search de continuer la recherche dans les données chiffrées.",
+ "authoritativeIpRanges": "Activez ce paramètre si vous souhaitez substituer la détection automatique Windows des plages IP.",
+ "authoritativeProxyServers": "Activez ce paramètre si vous souhaitez substituer la détection automatique Windows des serveurs proxy.",
+ "checkInput": "Vérifier la validité de l'entrée",
+ "dataRecoveryCert": "Un certificat de récupération est un certificat spécial du système de fichiers EFS que vous pouvez utiliser pour récupérer des fichiers chiffrés si votre clé de chiffrement est perdue ou endommagée. Vous devez créer le certificat de récupération et le spécifier ici. En savoir plus",
+ "enterpriseCloudResources": "
Spécifiez les ressources cloud à traiter comme ressources d'entreprise et à protéger avec une stratégie Windows Information Protection. Vous pouvez spécifier plusieurs ressources en séparant les entrées individuelles avec le caractère « | ».
Si un proxy est configuré dans votre entreprise, vous pouvez spécifier le proxy à travers lequel les ressources cloud que vous avez spécifiées seront routées.
URL[,Proxy]|URL[,Proxy]
Sans proxy : contoso.sharepoint.com|contoso.visualstudio.com Avec proxy : contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Spécifiez les plages d'adresses IPv4 qui constituent votre réseau d'entreprise. Elles sont utilisées conjointement avec les noms de domaine de réseau d'entreprise que vous spécifiez pour définir les limites de votre réseau d'entreprise.
Ce paramètre est obligatoire pour l'activation de Windows Information Protection.
Vous pouvez spécifier plusieurs plages en séparant les entrées individuelles par une virgule.
Par exemple : 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
+ "enterpriseIPv6Ranges": "
Spécifiez les plages d'adresses IPv6 qui constituent votre réseau d'entreprise. Elles sont utilisées conjointement avec les noms de domaine de réseau d'entreprise que vous spécifiez pour définir les limites de votre réseau d'entreprise.
Vous pouvez spécifier plusieurs plages en séparant les entrées individuelles par une virgule.
Par exemple : 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
+ "enterpriseInternalProxyServers": "
Si un proxy est configuré dans votre entreprise, vous pouvez spécifier le proxy à travers lequel le trafic vers les ressources cloud spécifiées dans les paramètres des ressources cloud d'entreprise doit être routé.
Vous pouvez spécifier plusieurs valeurs en séparant les entrées individuelles par un point-virgule.
Par exemple : contoso.internalproxy1.com;contoso.internalproxy2.com
",
+ "enterpriseNetworkDomainNames": "
Spécifiez les noms DNS qui constituent votre réseau d'entreprise. Ils sont utilisés conjointement avec les plages d'adresses IP que vous spécifiez pour définir les limites de votre réseau d'entreprise. Vous pouvez spécifier plusieurs valeurs en séparant les entrées individuelles par une virgule.
Ce paramètre est obligatoire pour l'activation de Windows Information Protection.
Par exemple : corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Spécifiez les noms DNS qui constituent votre réseau d'entreprise. Ils sont utilisés conjointement avec les plages d'adresses IP que vous spécifiez pour définir les limites de votre réseau d'entreprise. Vous pouvez spécifier plusieurs valeurs en les séparant par « | ».
Ce paramètre est obligatoire pour l'activation de Protection des informations Windows.
Par exemple : corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
Si vous avez des proxys accessibles en externe dans votre réseau d'entreprise, spécifiez-les ici. Quand vous spécifiez une adresse de serveur proxy, vous devez également spécifier le port à travers lequel le trafic doit être autorisé et protégé via Windows Information Protection.
Remarque : Cette liste ne doit pas inclure de serveurs de votre liste de serveurs proxy internes de l'entreprise. Vous pouvez spécifier plusieurs valeurs en séparant les entrées individuelles par un point-virgule.
Par exemple : proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "Spécifie la durée maximale (en minutes) autorisée pendant laquelle l'appareil peut rester inactif avant d'être verrouillé par un mot de passe ou un code PIN. Les utilisateurs peuvent choisir toute valeur de délai d'expiration existante qui est inférieure à la durée maximale spécifiée dans l'application Paramètres. Notez que les appareils Lumia 950 et 950XL ont une valeur de délai d'expiration maximale de 5 minutes, quelle que soit la valeur définie par cette stratégie.",
+ "maxInactivityTime2": "0 (par défaut) - Aucun délai d'expiration n'est défini. La valeur par défaut « 0 » est interprétée comme « Aucun délai d'expiration n'est défini ».",
+ "maxPasswordAttempts1": "Cette stratégie a un comportement différent sur un appareil mobile et un poste de travail.",
+ "maxPasswordAttempts2": "Sur un appareil mobile, quand l'utilisateur atteint la valeur définie par cette stratégie, l'appareil est réinitialisé.",
+ "maxPasswordAttempts3": "Sur un poste de travail, quand l'utilisateur atteint la valeur définie par cette stratégie, l'appareil n'est pas réinitialisé. Au lieu de cela, le poste de travail est mis en mode de récupération BitLocker, qui rend les données inaccessibles, mais récupérables. Si BitLocker n'est pas activé, la stratégie ne peut pas être appliquée.",
+ "maxPasswordAttempts4": "Avant d'atteindre la limite de tentatives infructueuses, l'utilisateur est redirigé vers l'écran de verrouillage et averti que l'ordinateur sera verrouillé à la prochaine tentative infructueuse. Quand l'utilisateur atteint la limite, l'appareil redémarre automatiquement et affiche la page de récupération BitLocker. Cette page invite l'utilisateur à entrer la clé de récupération BitLocker.",
+ "maxPasswordAttempts5": "0 (par défaut) - L'appareil n'est jamais réinitialisé après la saisie d'un code PIN ou d'un mot de passe incorrect.",
+ "maxPasswordAttempts6": "Si toutes les valeurs de stratégie sont égales à 0, 0 est la valeur la plus sûre. Sinon, la valeur de stratégie Min est la valeur la plus sûre.",
+ "mdmDiscoveryUrl": "Spécifiez l'URL du point de terminaison d'inscription MDM à utiliser par les utilisateurs pour s'inscrire au service MDM. Par défaut, cela est spécifié pour Intune.",
+ "minimumPinLength1": "Valeur entière qui définit le nombre minimal de caractères obligatoires dans le code PIN. La valeur par défaut est 4. Le plus petit nombre que vous pouvez spécifier pour ce paramètre de stratégie est 4. Le plus grand nombre que vous pouvez spécifier doit être inférieur au nombre défini dans le paramètre de stratégie Longueur maximale du code PIN ou au nombre 127, selon le plus petit des deux.",
+ "minimumPinLength2": "Si vous définissez ce paramètre de stratégie, la longueur du code PIN doit être supérieure ou égale à ce nombre. Si vous désactivez ou ne définissez pas ce paramètre de stratégie, la longueur du code PIN doit être supérieure ou égale à 4.",
+ "name": "Nom de cette limite réseau",
+ "neutralResources": "
Si vous avez des points de terminaison de redirection d'authentification dans votre entreprise, spécifiez-les ici. Les emplacements spécifiés ici sont considérés comme étant personnels ou d'entreprise en fonction du contexte de la connexion avant la redirection.
Vous pouvez spécifier plusieurs valeurs en séparant les entrées individuelles par une virgule.
Par exemple : sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Valeur qui définit Windows Hello Entreprise comme mode de connexion à Windows.",
+ "passportForWork2": "La valeur par défaut est true. Si vous définissez cette stratégie sur false, l’utilisateur ne peut pas provisionner Windows Hello Entreprise, sauf sur les téléphones mobiles joints à Microsoft Entra où le provisionnement est requis.",
+ "pinExpiration": "Le plus grand nombre que vous pouvez spécifier pour ce paramètre de stratégie est 730. Le plus petit nombre que vous pouvez spécifier pour ce paramètre de stratégie est 0. Si cette stratégie est définie sur 0, le code PIN de l'utilisateur n'expire jamais.",
+ "pinHistory1": "Le plus grand nombre que vous pouvez spécifier pour ce paramètre de stratégie est 50. Le plus petit nombre que vous pouvez spécifier pour ce paramètre de stratégie est 0. Si cette stratégie est définie sur 0, la conservation des codes PIN précédents n'est pas nécessaire.",
+ "pinHistory2": "Le code PIN actuel de l'utilisateur fait partie de l'ensemble des codes PIN associés au compte de l'utilisateur. L'historique des codes PIN n'est pas conservé après la réinitialisation d'un code PIN.",
+ "protectUnderLock": "Protège le contenu de l'application quand l'appareil est dans l'état verrouillé.",
+ "protectionModeBlock": "
Bloquer : Bloque le déplacement des données d'entreprise hors des applications protégées.
",
+ "protectionModeOff": "
Désactivé : L'utilisateur est autorisé à déplacer les données hors des applications protégées. Ces actions ne sont pas consignées.
",
+ "protectionModeOverride": "
Autoriser l'utilisateur à ignorer les avertissements : L'utilisateur est invité à confirmer son action quand il essaie de déplacer des données d'une application protégée vers une application non protégée. S'il choisit d'ignorer cet avertissement, l'action est consignée.
",
+ "protectionModeSilent": "
Aucun avertissement : L'utilisateur est autorisé à déplacer les données hors des applications protégées. Ces actions sont consignées.
",
+ "required": "Nécessaire",
+ "revokeOnMdmHandoff": "Ajouté dans Windows 10, version 1703. Cette stratégie contrôle s'il faut révoquer les clés WIP quand un appareil passe de GAM à MDM. Si elle est définie sur « Désactivé », les clés ne sont pas révoquées et l'utilisateur continue d'avoir accès aux fichiers protégés après la mise à niveau. Ceci est recommandé si le service MDM est configuré avec le même ID d'entreprise WIP que le service GAM.",
+ "revokeOnUnenroll": "Cela entraîne la révocation des clés de chiffrement quand l'inscription d'un appareil à cette stratégie est annulée.",
+ "rmsTemplateForEdp": "GUID TemplateID à utiliser pour le chiffrement RMS. Le modèle Azure RMS permet à l'administrateur informatique de configurer les détails de chaque utilisateur ayant accès au fichier protégé par RMS, et la durée de cet accès.",
+ "showWipIcon": "L'affichage d'une icône en superposition indique à l'utilisateur qu'il se trouve dans un contexte d'entreprise.",
+ "useRmsForWip": "Spécifie si le chiffrement Azure RMS est autorisé pour WIP."
+ },
+ "requireAppPin": "
Sélectionnez Oui pour désactiver le code PIN de l’application quand un verrouillage d’appareil est détecté sur un appareil inscrit.
Remarque : Intune ne peut pas détecter l’inscription d’un appareil avec une solution EMM tierce sur iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Créer un script personnalisé",
+ "edit": "Modifier le script personnalisé"
+ },
+ "basicInfo": "Créez un package de script personnalisé à partir des scripts de détection et de correction que vous avez écrits.",
+ "customScriptCapitalized": "Script personnalisé",
+ "customScriptLowercase": "script personnalisé",
+ "detectionScript": "Script de détection"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Par défaut",
+ "header": "Priorité de mise à jour",
+ "postponed": "Différé",
+ "priority": "Haute priorité"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Mise à jour automatique",
+ "sublabel": "Si des applications remplacées ont été installées par l’utilisateur à partir de Portail d'entreprise, vous devez installer l’application de remplacement."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Arrière-plan ",
+ "displayText": "Téléchargement de contenu dans {0}",
+ "foreground": "Premier plan",
+ "header": "Priorité d’optimisation de la distribution"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Autoriser l'utilisateur à répéter la notification de redémarrage",
+ "countdownDialog": "Sélectionner quand afficher la boîte de dialogue de compte à rebours avant le redémarrage (en minutes)",
+ "durationInMinutes": "Période de grâce de redémarrage de l'appareil (en minutes)",
+ "snoozeDurationInMinutes": "Sélectionner la durée de répétition (en minutes)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Fuseau horaire",
+ "local": "Fuseau horaire de l'appareil ",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Date et heure",
+ "deadlineTimeColumnLabel": "Échéance d'installation",
+ "deadlineTimeDatePickerErrorMessage": "La date sélectionnée doit être postérieure à la date disponible",
+ "deadlineTimeLabel": "Date d’échéance de l’installation de l’application",
+ "defaultTime": "Dès que possible",
+ "infoText": "Cette application est disponible dès qu’elle a été déployée, sauf si vous spécifiez une heure de disponibilité ci-dessous. S’il s’agit d’une application obligatoire, vous pouvez spécifier l’échéance d’installation.",
+ "specificTime": "Date et heure spécifiques",
+ "startTimeColumnLabel": "Disponibilité",
+ "startTimeDatePickerErrorMessage": "La date sélectionnée doit être antérieure à la date d’échéance",
+ "startTimeLabel": "Disponibilité de l’application"
+ },
+ "restartGracePeriodHeader": "Période de grâce de redémarrage",
+ "restartGracePeriodLabel": "Période de grâce de redémarrage de l'appareil",
+ "summaryTitle": "Expérience utilisateur final"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Attribuez un attribut personnalisé à au moins un groupe. Accédez à Propriétés pour modifier les attributions.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "script shell",
"successfullySavedPolicy": "« {0} » a été enregistré"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64 bits",
+ "thirtyTwoBit": "32 bits"
+ },
+ "Countries": {
+ "ae": "Émirats arabes unis",
+ "ag": "Antigua-et-Barbuda",
+ "ai": "Anguilla",
+ "al": "Albanie",
+ "am": "Arménie",
+ "ao": "Angola",
+ "ar": "Argentine",
+ "at": "Autriche",
+ "au": "Australie",
+ "az": "Azerbaïdjan",
+ "bb": "Barbade",
+ "be": "Belgique",
+ "bf": "Burkina Faso",
+ "bg": "Bulgarie",
+ "bh": "Bahreïn",
+ "bj": "Bénin",
+ "bm": "Bermudes",
+ "bn": "Brunéi Darussalam",
+ "bo": "Bolivie",
+ "br": "Brésil",
+ "bs": "Bahamas",
+ "bt": "Bhoutan",
+ "bw": "Botswana",
+ "by": "Bélarus",
+ "bz": "Belize",
+ "ca": "Canada",
+ "cg": "République du Congo",
+ "ch": "Suisse",
+ "cl": "Chili",
+ "cn": "Chine",
+ "co": "Colombie",
+ "cr": "Costa Rica",
+ "cv": "Cabo Verde",
+ "cy": "Chypre",
+ "cz": "République tchèque",
+ "de": "Allemagne",
+ "dk": "Danemark",
+ "dm": "Dominique",
+ "do": "République dominicaine",
+ "dz": "Algérie",
+ "ec": "Équateur",
+ "ee": "Estonie",
+ "eg": "Égypte",
+ "es": "Espagne",
+ "fi": "Finlande",
+ "fj": "Fidji",
+ "fm": "États fédérés de Micronésie",
+ "fr": "France",
+ "gb": "Royaume-Uni",
+ "gd": "Grenade",
+ "gh": "Ghana",
+ "gm": "Gambie",
+ "gr": "Grèce",
+ "gt": "Guatemala",
+ "gw": "Guinée-Bissau",
+ "gy": "Guyana",
+ "hk": "Hong Kong",
+ "hn": "Honduras",
+ "hr": "Croatie",
+ "hu": "Hongrie",
+ "id": "Indonésie",
+ "ie": "Irlande",
+ "il": "Israël",
+ "in": "Inde",
+ "is": "Islande",
+ "it": "Italie",
+ "jm": "Jamaïque",
+ "jo": "Jordanie",
+ "jp": "Japon",
+ "ke": "Kenya",
+ "kg": "Kirghizistan",
+ "kh": "Cambodge",
+ "kn": "Saint-Christophe-et-Niévès",
+ "kr": "République de Corée",
+ "kw": "Koweït",
+ "ky": "Cayman (îles)",
+ "kz": "Kazakhstan",
+ "la": "République démocratique populaire lao",
+ "lb": "Liban",
+ "lc": "Sainte-Lucie",
+ "lk": "Sri Lanka",
+ "lr": "Libéria",
+ "lt": "Lituanie",
+ "lu": "Luxembourg",
+ "lv": "Lettonie",
+ "md": "République de Moldova",
+ "mg": "Madagascar",
+ "mk": "Macédoine du Nord",
+ "ml": "Mali",
+ "mn": "Mongolie",
+ "mo": "Macao",
+ "mr": "Mauritanie",
+ "ms": "Montserrat",
+ "mt": "Malte",
+ "mu": "Maurice",
+ "mw": "Malawi",
+ "mx": "Mexique",
+ "my": "Malaisie",
+ "mz": "Mozambique",
+ "na": "Namibie",
+ "ne": "Niger",
+ "ng": "Nigéria",
+ "ni": "Nicaragua",
+ "nl": "Pays-Bas",
+ "no": "Norvège",
+ "np": "Népal",
+ "nz": "Nouvelle-Zélande",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Pérou",
+ "pg": "Papouasie-Nouvelle-Guinée",
+ "ph": "Philippines",
+ "pk": "Pakistan",
+ "pl": "Pologne",
+ "pt": "Portugal",
+ "pw": "Palaos",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Roumanie",
+ "ru": "Russie",
+ "sa": "Arabie saoudite",
+ "sb": "Salomon (îles)",
+ "sc": "Seychelles",
+ "se": "Suède",
+ "sg": "Singapour",
+ "si": "Slovénie",
+ "sk": "Slovaquie",
+ "sl": "Sierra Leone",
+ "sn": "Sénégal",
+ "sr": "Suriname",
+ "st": "Sao Tomé-et-Principe",
+ "sv": "El Salvador",
+ "sz": "Swaziland",
+ "tc": "Turques-et-Caïques",
+ "td": "Tchad",
+ "th": "Thaïlande",
+ "tj": "Tadjikistan",
+ "tm": "Turkménistan",
+ "tn": "Tunisie",
+ "tr": "Turquie",
+ "tt": "Trinité-et-Tobago",
+ "tw": "Taïwan",
+ "tz": "Tanzanie",
+ "ua": "Ukraine",
+ "ug": "Ouganda",
+ "us": "États-Unis",
+ "uy": "Uruguay",
+ "uz": "Ouzbékistan",
+ "vc": "Saint-Vincent-et-les-Grenadines",
+ "ve": "Venezuela",
+ "vg": "Îles Vierges britanniques",
+ "vn": "Vietnam",
+ "ye": "Yémen",
+ "za": "Afrique du Sud",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Ce paramètre n’est pas configurable via OMA-URI, car il est disponible dans le catalogue de paramètres. Veuillez accéder au catalogue des paramètres pour configurer ce paramètre."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Sélectionner un fichier de profil de configuration"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Ces paramètres fonctionnent pour les appareils qui ont été inscrits avec ou sans approbation de l'utilisateur par le biais de l’inscription de l’appareil, et pour les appareils inscrits avec l’inscription automatique des appareils (anciennement DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Inscription d’appareil et inscription automatique d’appareils",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Inscription d’appareil et inscription automatique d’appareils",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Configurez Microsoft Launcher sur vos appareils complètement managés.",
+ "deviceExperienceTypeDescription": "En fonction de l’expérience que vous voulez configurer, sélectionnez Mode plein écran ou Microsoft Launcher pour commencer à configurer l’expérience sur vos appareils. Si vous ne sélectionnez pas de type d’expérience d’appareil, les utilisateurs verront l’expérience d’écran d’accueil par défaut de l’appareil.",
+ "deviceExperienceTypeKioskMode": "Mode plein écran (dédié et complètement managé)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Utilisez Microsoft Launcher pour personnaliser l’expérience d’écran d’accueil sur les appareils gérés de votre organisation. Si vous configurez Launcher comme application par défaut, les utilisateurs de l’appareil ne peuvent pas utiliser un autre lanceur.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Désigner Microsoft Launcher comme lanceur par défaut",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (complètement managé uniquement)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Les utilisateurs ne sont pas en mesure de changer le papier peint, sauf si vous les y autorisez. Ce paramètre n’est disponible que si vous configurez un papier peint personnalisé.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Autoriser l’utilisateur à modifier le papier peint",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Vous permet d’appliquer votre propre image comme papier peint de l’écran d’accueil et de choisir si l’utilisateur peut la changer. Si vous ne configurez pas de papier peint personnalisé, l’appareil conserve son papier-peint actuel.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Configurer le papier peint personnalisé",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Cette image s’affiche comme papier peint sur l’écran d’accueil de l’appareil. Ce champ n’est disponible que si vous configurez un papier peint personnalisé.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Entrer l’URL de l’image de papier peint",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Désactivé",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Masquer",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Afficher",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Si vous autorisez l’utilisateur à changer la présence de la station d’accueil, le paramètre précédent est appliqué pour le déploiement initial. Pour les déploiements suivants, le paramètre n’est pas appliqué pour respecter les modifications apportées par l’utilisateur. Ce paramètre n’est disponible que si vous configurez la présence de la station d’accueil.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Autoriser l’utilisateur à changer la présence de la station d’accueil",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "La station d’accueil est un menu qui permet aux utilisateurs de l’appareil d’accéder rapidement à leurs applications et outils. Quand elle est masquée, les utilisateurs doivent balayer vers le haut pour y accéder.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Présence de la station d’accueil",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Si vous autorisez l’utilisateur à activer/désactiver le flux, le paramètre précédent est appliqué pour le déploiement initial. Pour les déploiements suivants, le paramètre n’est pas appliqué pour respecter les modifications apportées par l’utilisateur. Ce paramètre n’est disponible que si vous activez le flux du lanceur.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Autoriser l’utilisateur à activer/désactiver le flux",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Le flux est un écran supplémentaire à droite de l’écran d’accueil, où les utilisateurs d’appareils peuvent accéder à leurs calendriers, documents et activités récentes. Si vous n’activez pas cette option, elle reste désactivée. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Activer le flux du lanceur",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Emplacement de la barre de recherche",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bas",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Masquer",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Haut",
+ "deviceExperienceTypeName": "Type d’expérience de l’appareil",
"deviceGuardCredentialGuardDescription": "L'activation avec un verrou UEFI garantit que Credential Guard ne peut pas être désactivé à distance. L'activation sans verrou UEFI autorise la désactivation à distance de Credential Guard par le biais d'une stratégie de groupe.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "ID d'appareil Intune",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Nombre de jours précédant la transition des redémarrages automatiques planifiés en dehors des heures actives vers le redémarrage commencé, qui exige une planification de la part de l'utilisateur.",
"engagedRestartTransitionScheduleName": "Basculer les utilisateurs sur un redémarrage commencé après un redémarrage automatique (jours)",
"enhancedOption": "Amélioré (1903 et versions antérieures)",
- "enrollmentProfileTypeDedicatedDevice": "Appareil dédié",
- "enrollmentProfileTypeDescription": "Sélectionnez un type de profil d’inscription pour démarrer la configuration de Microsoft Launcher ou de Microsoft Managed Home Screen sur vos appareils. Si vous ne sélectionnez pas de type de profil, les utilisateurs voient l’expérience d’écran d’accueil par défaut de l’appareil.",
- "enrollmentProfileTypeFullyManaged": "Complètement managé",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Configurez Microsoft Launcher sur vos appareils complètement managés.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Utilisez Microsoft Launcher pour personnaliser l’expérience d’écran d’accueil sur les appareils gérés de votre organisation. Si vous configurez Launcher comme application par défaut, les utilisateurs de l’appareil ne peuvent pas utiliser un autre lanceur.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Désigner Microsoft Launcher comme lanceur par défaut",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Autoriser l’utilisateur à modifier le papier peint",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Vous permet d’appliquer votre propre image comme papier peint de l’écran d’accueil et de choisir si l’utilisateur peut la changer. Si vous ne configurez pas de papier peint personnalisé, l’appareil conserve son papier-peint actuel.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Configurer le papier peint personnalisé",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Cette image s’affiche comme papier peint sur l’écran d’accueil de l’appareil. Ce champ n’est disponible que si vous configurez un papier peint personnalisé.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Entrer l’URL de l’image de papier peint",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Désactivé",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Masquer",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Afficher",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "La station d’accueil est un menu qui permet aux utilisateurs de l’appareil d’accéder rapidement à leurs applications et outils. Quand elle est masquée, les utilisateurs doivent balayer vers le haut pour y accéder.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Présence de la station d’accueil",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Autoriser l’utilisateur à activer/désactiver le flux",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Le flux est un écran supplémentaire à droite de l’écran d’accueil, où les utilisateurs d’appareils peuvent accéder à leurs calendriers, documents et activités récentes. Si vous n’activez pas cette option, elle reste désactivée. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Activer le flux du lanceur",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Emplacement de la barre de recherche",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bas",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Masquer",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Haut",
- "enrollmentProfileTypeName": "Type de profil d’inscription",
"enrollmentSettingsHeading": "Paramètres d'inscription",
"enterOnlyOneForDns": "Entrez une liste de serveurs DNS et/ou un serveur proxy.",
"enterpriseModeLoggingExample": "par exemple, http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Appareils de profils professionnels complètement managés et appartenant à l’entreprise",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Ces paramètres fonctionnent uniquement pour les appareils complètement managés et dédiés.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Appareils complètement managés et dédiés",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Ces paramètres fonctionnent uniquement pour les appareils complètement managés et dédiés fonctionnant avec une stratégie plein écran.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Appareils complètement managés et dédiés (mode plein écran uniquement)",
"gameCenterBlockedMacDescription": "Oui désactive Game Center et l’icône Game Center est supprimée de l’écran d’accueil. Disponible pour les appareils exécutant macOS versions 10.13 ou une version ultérieure.",
"gameCenterBlockedMacName": "Bloquer Game Center",
"gamingPageDescription": "Bloque l'accès à Jeux dans l'application Paramètres.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Configure le type d'ouverture de session pour accéder aux applications sur cet appareil kiosque.",
"kioskShowTaskbarDesc": "Affiche ou masque la barre des tâches Windows sur le kiosque.",
"kioskShowTaskbarName": "Barre des tâches Windows",
+ "kioskSingleInfoBoxText": "Mode plein écran d’application unique : verrouille l’appareil pour exécuter l’application sélectionnée. Pour utiliser ce mode, vous devez d’abord approuver et affecter l’application sélectionnée à partir de la charge de travail des applications clientes. Sur les appareils complètement managés, la seule application sélectionnée qui s’applique est Managed Home Screen. Toutes les autres applications sont traitées en tant qu’application obligatoire à la place.",
"kioskStartDateTime": "Heure de début de la fenêtre de maintenance",
"kioskStartMenuLayoutXmlDesc": "Fournir une disposition XML qui définit l'ordre d'affichage des applications dans le menu Démarrer",
"kioskStartMenuLayoutXmlDescV2": "L'importation d'un fichier XML configurant la mise en page de Start remplace l'ordre d'affichage existant et les sélections de taille de tuiles. En savoir plus",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Doit être un chemin de fichier valide",
"mustBeAValidHttpsUrl": "Doit être une URL https valide",
"mustBeAValidIPAddress": "Doit être une adresse IP valide (par exemple, 192.168.0.1 ou 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "La valeur doit être une adresse IP ou un nom de domaine complet valide avec un numéro de port facultatif.",
"mustBeAValidIPv4Address": "Doit être une adresse IPv4 valide (par ex., 192.168.0.1)",
"mustBeAValidIPv6Address": "Doit être une adresse IPv6 valide (par exemple, 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Doit être une URL d'image valide, par exemple www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Règles de pare-feu Windows à partir du magasin local (réseaux publics)",
"publicNetworkName": "Réseau (non découvrable) public",
"publicOutboundConnectionsSummaryLabel": "Action par défaut pour les connexions sortantes (réseaux publics)",
- "publicPlayStoreEnabledDescription": "Les utilisateurs peuvent accéder à toutes les applications, sauf celles dont vous avez demandé la désinstallation dans Applications clientes. Si vous choisissez « Non configuré » pour ce paramètre, les utilisateurs peuvent accéder uniquement aux applications listées comme disponibles ou obligatoires dans Applications clientes.",
+ "publicPlayStoreEnabledDescription": "Si vous sélectionnez « Autoriser », les utilisateurs ont accès à toutes les applications, à l’exception de celles que vous avez requises pour la désinstallation dans Les applications clientes. Si vous choisissez « Bloquer » ou « Non configuré » pour ce paramètre, les utilisateurs peuvent uniquement accéder aux applications que vous avez répertoriées comme étant disponibles ou requises dans Les applications clientes.",
"publicPlayStoreEnabledName": "Autoriser l'accès à toutes les applications dans Google Play Store",
- "publicPlayStoreEnabledWarning": "Si vous sélectionnez « Autoriser », les utilisateurs peuvent installer des applications à partir du Google Play Store. Si vous remplacez votre sélection par « Non configuré », toutes les applications non explicitement autorisées pour l’utilisateur seront supprimées de l’appareil.",
+ "publicPlayStoreEnabledWarning": "Si vous sélectionnez « Autoriser », les utilisateurs peuvent installer des applications à partir du Google Play Store. Si vous remplacez ultérieurement votre sélection par « Bloquer » ou « Non configuré », toutes les applications seront supprimées de l’appareil, à l’exception des applications que vous avez répertoriées comme étant disponibles ou requises dans les applications clientes.",
+ "publicPlayStoreSelectionAllowList": "Bloquer",
+ "publicPlayStoreSelectionBlockList": "Autoriser",
+ "publicPlayStoreSelectionNotConfigured": "Non configurée(s)",
"publicShieldedSummaryLabel": "Protection maximale (réseaux publics)",
"publicStealthModeSummaryLabel": "Mode furtif (réseaux publics)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Réponses en monodiffusion au trafic en multidiffusion (réseaux publics)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Suppression...",
"photoLibrary": "Photothèque",
"pinCharSettingTooltip": "Un code PIN numérique peut contenir seulement des caractères numériques.\r\n\r\nUn code secret doit contenir tous les éléments suivants : des caractères alphanumériques et des symboles autorisés.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Important : Le 1er juin 2024, les applications avec un kit de développement logiciel (SDK) antérieur à la version 17.7.0 ne recevront plus de mises à jour de stratégie de protection des applications et les utilisateurs ne pourront plus lancer l’application. Veuillez vous assurer que les utilisateurs mettent à jour leurs applications et que vos applications professionnelles utilisent un kit de développement logiciel (SDK) ou un wrapper récent. En savoir plus",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Plateforme",
"platformDropDownLabel": "Plateforme",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Appareil",
"licenseTypeUser": "Utilisateur"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Propriété",
- "rule": "Règle",
- "ruleDetails": "Détails de la règle",
- "value": "Valeur"
- },
- "assignIf": "Attribuer le profil si",
- "deleteWarning": "Cette opération supprime la règle d'applicabilité sélectionnée",
- "dontAssignIf": "Ne pas attribuer le profil si",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "et {0} de plus",
- "instructions": "Spécifiez comment appliquer ce profil dans un groupe affecté. Intune applique seulement le profil aux appareils qui répondent aux critères combinés de ces règles.",
- "maxText": "Max",
- "minText": "Min",
- "noActionRow": "Aucune règle d'applicabilité spécifiée",
- "oSVersion": "Par ex., 1.2.3.4",
- "toText": "jusqu'au",
- "windows10Education": "Windows 10/11 Éducation",
- "windows10EducationN": "Windows 10/11 Éducation N",
- "windows10Enterprise": "Windows 10/11 Entreprise",
- "windows10EnterpriseN": "Windows 10/11 Entreprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Famille",
- "windows10HomeChina": "Windows 10 Famille Chine",
- "windows10HomeN": "Windows 10/11 Famille N",
- "windows10HomeSingleLanguage": "Windows 10/11 Famille Unilingue",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Standard Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Entreprise",
- "windows10OsEdition": "Édition du système d'exploitation",
- "windows10OsVersion": "Version du système d'exploitation",
- "windows10Professional": "Windows 10/11 Professionnel",
- "windows10ProfessionalEducation": "Windows 10/11 Professionnel Éducation",
- "windows10ProfessionalEducationN": "Windows 10/11 Professionnel Éducation N",
- "windows10ProfessionalN": "Windows 10 Professionnel N",
- "windows10ProfessionalWorkstation": "Station de travail Windows 10/11 Professionnel",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professionnel Station de travail N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Est égal à",
- "greaterThan": "Supérieur à",
- "greaterThanOrEqualTo": "Supérieur ou égal à",
- "lessThan": "Inférieur à",
- "lessThanOrEqualTo": "Inférieur ou égal à",
- "notEqualTo": "Différent de"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Appliquer la vérification de signature de script et exécuter le script sans avertissement",
- "enforceSignatureCheckTooltip": "Sélectionnez 'Oui' pour vérifier que le script est signé par un éditeur approuvé, ce qui permet de l'exécuter sans afficher d'avertissements ni d'invites. Le script s'exécute sans blocage. Sélectionnez 'Non' (par défaut) pour exécuter le script avec confirmation de l'utilisateur final sans vérification de signature.",
- "header": "Utiliser un script de détection personnalisé",
- "runAs32Bit": "Exécuter le script comme processus 32 bits sur des clients 64 bits",
- "runAs32BitTooltip": "Sélectionnez 'Oui' pour exécuter le script dans un processus 32 bits sur des clients 64 bits. Sélectionnez 'Non' (par défaut) pour exécuter le script dans un processus 64 bits sur des clients 64 bits. Les clients 32 bits exécutent le script dans un processus 32 bits.",
- "scriptContent": "Contenu de script",
- "scriptFile": "Fichier de script",
- "scriptFileNotSelectedValidation": "Aucun fichier de script sélectionné.",
- "scriptFileTooltip": "Sélectionnez un script PowerShell qui détecte la présence de l'application sur le client. L'application est détectée quand le script retourne un code de sortie de valeur 0 et écrit une valeur de chaîne dans STDOUT.",
- "scriptSizeLimitValidation": "Votre script de détection dépasse la taille maximale autorisée. Résolvez ce problème en réduisant la taille de votre script de détection."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Date de création",
- "dateModified": "Date de modification",
- "doesNotExist": "Le fichier ou dossier n'existe pas",
- "fileOrFolderExists": "Le fichier ou le dossier existe",
- "sizeInMB": "Taille en Mo",
- "version": "Chaîne (version)"
- },
- "associatedWith32Bit": "Associé à une application 32 bits sur des clients 64 bits",
- "associatedWith32BitTooltip": "Sélectionnez 'Oui' pour développer des variables d'environnement path dans le contexte 32 bits sur des clients 64 bits. Sélectionnez 'Non' (par défaut) pour développer des variables path dans le contexte 64 bits sur des clients 64 bits. Les clients 32 bits utilisent toujours le contexte 32 bits.",
- "detectionMethod": "Méthode de détection",
- "detectionMethodTooltip": "Sélectionnez le type de méthode de détection utilisé pour valider la présence de l'application.",
- "fileOrFolder": "Fichier ou dossier",
- "fileOrFolderToolTip": "Fichier ou dossier à détecter.",
- "operator": "Opérateur",
- "operatorTooltip": "Sélectionnez l'opérateur de la méthode de détection utilisée pour valider la comparaison.",
- "path": "Chemin d'accès",
- "pathTooltip": "Chemin complet du dossier contenant le fichier ou le dossier à détecter.",
- "value": "Valeur",
- "valueTooltip": "Sélectionnez une valeur correspondant à la méthode de détection sélectionnée. Les méthodes de détection de date doivent être entrées en heure locale."
- },
- "GridColumns": {
- "pathOrCode": "Chemin/Code",
- "type": "Type"
- },
- "MsiRule": {
- "operator": "Opérateur",
- "operatorTooltip": "Sélectionnez l'opérateur de la comparaison de validation de version de produit MSI.",
- "productCode": "Code de produit MSI",
- "productCodeTooltip": "Code de produit MSI valide pour l'application.",
- "productVersion": "Valeur",
- "productVersionCheck": "Vérification de la version de produit MSI",
- "productVersionCheckTooltip": "Sélectionnez 'Oui' pour vérifier la version de produit MSI en plus du code de produit MSI.",
- "productVersionTooltip": "Entrez la version de produit MSI de l'application."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Comparaison d'entiers",
- "keyDoesNotExist": "La clé n'existe pas",
- "keyExists": "La clé existe",
- "stringComparison": "Comparaison de chaînes",
- "valueDoesNotExist": "La valeur n'existe pas",
- "valueExists": "La valeur existe",
- "versionComparison": "Comparaison de versions"
- },
- "associatedWith32Bit": "Associé à une application 32 bits sur des clients 64 bits",
- "associatedWith32BitTooltip": "Sélectionnez 'Oui' pour rechercher dans le Registre 32 bits sur des clients 64 bits. Sélectionnez 'Non' (par défaut) pour rechercher dans le Registre 64 bits sur des clients 64 bits. Les clients 32 bits recherchent toujours dans le Registre 32 bits.",
- "detectionMethod": "Méthode de détection",
- "detectionMethodTooltip": "Sélectionnez le type de méthode de détection utilisé pour valider la présence de l'application.",
- "keyPath": "Chemin de la clé",
- "keyPathTooltip": "Chemin complet de l'entrée de Registre contenant la valeur à détecter.",
- "operator": "Opérateur",
- "operatorTooltip": "Sélectionnez l'opérateur de la méthode de détection utilisée pour valider la comparaison.",
- "value": "Valeur",
- "valueName": "Nom de valeur",
- "valueNameTooltip": "Nom de la valeur de Registre à détecter.",
- "valueTooltip": "Sélectionnez une valeur correspondant à la méthode de détection sélectionnée."
- },
- "RuleTypeOptions": {
- "file": "Fichier",
- "mSI": "MSI",
- "registry": "Registre"
- },
- "gridAriaLabel": "Règles de détection",
- "header": "Créez une règle qui indique la présence de l'application.",
- "noRulesSelectedPlaceholder": "Aucune règle spécifiée.",
- "ruleTableLimit": "Vous pouvez ajouter jusqu’à 25 règles de détection",
- "ruleType": "Type de règle",
- "ruleTypeTooltip": "Choisissez le type de règle de détection à ajouter."
- },
- "RuleConfigurationOptions": {
- "customScript": "Utiliser un script de détection personnalisé",
- "manual": "Configurer manuellement les règles de détection"
- },
- "bladeTitle": "Règles de détection",
- "header": "Configurez des règles propres à l'application pour détecter la présence de l'application.",
- "rulesFormat": "Format des règles",
- "rulesFormatTooltip": "Choisissez de configurer les règles de détection manuellement ou utilisez un script personnalisé pour détecter la présence de l'application.",
- "selectorLabel": "Règles de détection"
+ "BooleanActions": {
+ "allow": "Accorder",
+ "block": "Bloquer",
+ "configured": "Configuré",
+ "disable": "Désactiver",
+ "dontRequire": "N'exigent pas",
+ "enable": "Activer",
+ "hide": "Masquer",
+ "limit": "Limite",
+ "notConfigured": "Non configuré",
+ "require": "Exiger",
+ "show": "Afficher",
+ "yes": "Oui"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge paramètres SmartScreen recommandés par l’application : Windows 10 dans le modèle de configuration cloud. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Détection et réponse des points de terminaison"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "Isolement des applications et du navigateur",
- "aSRApplicationControl": "Contrôle de l’application",
- "aSRAttackSurfaceReduction": "Règles de réduction de la surface d'attaque",
- "aSRDeviceControl": "Contrôle de l’appareil",
- "aSRExploitProtection": "Protection contre le code malveillant",
- "aSRWebProtection": "Protection web (ancienne version de Microsoft Edge)",
- "aVExclusions": "Exclusions de Microsoft Defender Antivirus",
- "antivirus": "Microsoft Defender Antivirus",
- "cloudPC": "Base de référence de sécurité Windows 365",
- "default": "Sécurité du point de terminaison",
- "defenderTest": "Démonstration Microsoft Defender pour point de terminaison",
- "diskEncryption": "BitLocker",
- "eDR": "Détection et réponse des points de terminaison",
- "edgeSecurityBaseline": "Base de référence Microsoft Edge",
- "edgeSecurityBaselinePreview": "Préversion : base de référence Microsoft Edge",
- "editionUpgradeConfiguration": "Mise à niveau de l'édition et changement de mode",
- "firewall": "Pare-feu Windows",
- "firewallRules": "Règles de pare-feu Windows",
- "identityProtection": "Protection du compte",
- "identityProtectionPreview": "Protection du compte (préversion)",
- "mDMSecurityBaseline1810": "Base de référence de sécurité MDM pour Windows 10 et versions ultérieures pour octobre 2018",
- "mDMSecurityBaseline1810Preview": "Préversion : base de référence de sécurité MDM pour Windows 10 et versions ultérieures pour octobre 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Préversion : base de référence de sécurité MDM pour Windows 10 pour octobre 2018 (bêta)",
- "mDMSecurityBaseline1906": "Base de référence de sécurité MDM pour Windows 10 et versions ultérieures pour mai 2019",
- "mDMSecurityBaseline2004": "Base de référence de sécurité MDM pour Windows 10 et versions ultérieures pour août 2020",
- "mDMSecurityBaseline2101": "Base de référence de sécurité GPM pour Windows 10 et versions ultérieures de décembre 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "Pare-feu macOS",
- "microsoftDefenderBaseline": "Base de référence Microsoft Defender pour point de terminaison",
- "office365Baseline": "Base de référence Microsoft Office 365",
- "office365BaselinePreview": "Préversion : base de référence Microsoft Office 365",
- "securityBaselines": "Bases de référence de sécurité",
- "test": "Modèle de test",
- "testFirewallRulesSecurityTemplateName": "Règles de pare-feu Windows (test)",
- "testIdentityProtectionSecurityTemplateName": "Protection du compte (test)",
- "windowsSecurityExperience": "Expérience de sécurité Windows"
- },
- "Firewall": {
- "mDE": "Pare-feu Windows"
- },
- "FirewallRules": {
- "mDE": "Règles de pare-feu Windows"
- },
- "OneDriveKnownFolderMove": {
- "description": "Paramètres de déplacement de dossiers connus de OneDrive : Modèle de configuration de Windows 10 dans le nuage. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Protection de compte",
- "administrativeTemplates": "Modèles d'administration",
- "androidCompliancePolicy": "Stratégie de conformité Android",
- "aospDeviceOwnerCompliancePolicy": "Stratégie de conformité Android (AOSP)",
- "applicationControl": "Contrôle d’application pour les entreprises",
- "attackSurfaceReductionRules": "Règles de réduction de la surface d'attaque",
- "bitlocker": "BitLocker",
- "custom": "Personnalisé",
- "deliveryOptimization": "Optimisation de livraison",
- "derivedPersonalIdentityVerificationCredential": "Information d’identification dérivée",
- "deviceControl": "Contrôle de l'appareil",
- "deviceFeatures": "Fonctionnalités de l'appareil",
- "deviceFirmwareConfigurationInterface": "Interface de configuration du microprogramme d'appareil",
- "deviceLock": "Verrouillage de l’appareil",
- "deviceOwner": "Profil professionnel complètement managé, dédié et appartenant à l’entreprise",
- "deviceRestrictions": "Restrictions sur l'appareil",
- "deviceRestrictionsWindows10Team": "Restrictions sur les appareils (Windows 10 Collaboration)",
- "domainJoinPreview": "Jonction de domaine",
- "editionUpgradeAndModeSwitch": "Mise à niveau de l'édition et changement de mode",
- "education": "Éducation",
- "email": "E-mail",
- "emailSamsungKnoxOnly": "E-mail (Samsung KNOX uniquement)",
- "endpointProtection": "Endpoint protection",
- "expeditedCheckin": "Configuration de la gestion des périphériques mobiles",
- "exploitProtection": "Protection Exploit",
- "extensions": "Extensions",
- "hardwareConfigurations": "Configurations du BIOS et d’autres paramètres",
- "identityProtection": "Identity Protection",
- "iosCompliancePolicy": "Stratégie de conformité iOS",
- "kiosk": "Kiosque",
- "localUsersAndGroups": "Modifier l’appartenance au groupe de l’utilisateur",
- "macCompliancePolicy": "Stratégie de conformité Mac",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Base de référence des applications Microsoft 365 pour la sécurité des entreprises",
- "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
- "microsoftDefenderAntivirusexclusions": "Exclusions de Microsoft Defender Antivirus",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender pour point de terminaison (appareils de bureau exécutant Windows 10 ou versions ultérieures)",
- "microsoftDefenderFirewallRules": "Règles de pare-feu Windows",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Base de référence de sécurité pour Microsoft Edge",
- "mxProfileZebraOnly": "Profil MX (Zebra uniquement)",
- "networkBoundary": "Limite réseau",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Remplacer la stratégie de groupe",
- "pkcsCertificate": "Certificat PKCS",
- "pkcsImportedCertificate": "Certificat PKCS importé",
- "preferenceFile": "Fichier de préférences",
- "presets": "Présélections",
- "scepCertificate": "Certificat SCEP",
- "secureAssessmentEducation": "Évaluation sécurisée (éducation)",
- "securityBaselineForHololens2Advanced": "Base de référence de sécurité avancée pour HoloLens 2",
- "securityBaselineForHololens2Standard": "Base de référence de sécurité standard pour HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Base de référence de sécurité pour Microsoft Edge",
- "settingsCatalog": "Catalogue des paramètres",
- "sharedMultiUserDevice": "Appareil multi-utilisateur partagé",
- "softwareUpdates": "Mises à jour logicielles",
- "trustedCertificate": "Certificat approuvé",
- "unknown": "Inconnu",
- "unsupported": "Non pris en charge",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Importation Wi-Fi",
- "windows10CompliancePolicy": "Stratégie de conformité Windows 10/11",
- "windows10MobileCompliancePolicy": "Stratégie de conformité Windows 10 Mobile",
- "windows10XScep": "Certificat SCEP - TEST",
- "windows10XTrustedCertificate": "Certificat approuvé - TEST",
- "windows10XVPN": "VPN - TEST",
- "windows10XWifi": "WIFI - TEST",
- "windows11SecurityBaseline": "Base de référence de sécurité pour Windows 10 et versions ultérieures",
- "windows365SecurityBaseline": "Base de référence de sécurité Windows 365",
- "windows8CompliancePolicy": "Stratégie de conformité Windows 8",
- "windowsHealthMonitoring": "Monitoring de l’intégrité Windows",
- "windowsInformationProtection": "Protection des informations Windows",
- "windowsPhoneCompliancePolicy": "Stratégie de conformité Windows Phone",
- "windowsUpdateforBusiness": "Windows Update pour Entreprise",
- "wiredNetwork": "Réseau câblé",
- "workProfile": "Profil de travail personnel"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Rendre les mises à jour disponibles graduellement",
- "immediateStart": "Rendre les mises à jour disponibles dès que possible",
- "startDateOnly": "Mettre à jour la disponibilité à une date spécifique"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Appareils gérés",
- "devicesWithoutEnrollment": "Applications gérées"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filtrer",
- "assignmentFilterTypeColumnHeader": "Mode Filtrer",
- "assignmentToast": "Notifications de l’utilisateur final",
- "assignmentTypeTableHeader": "TYPE D’AFFECTATION",
- "autoUpdate": "Mise à jour automatique",
- "deadlineTimeColumnLabel": "Échéance de l’installation",
- "deliveryOptimizationPriorityHeader": "Priorité d’optimisation de la distribution",
- "groupTableHeader": "Groupe",
- "installContextLabel": "Contexte d’installation",
- "isRemovable": "Installer comme amovible",
- "licenseTypeLabel": "Type de licence",
- "modeTableHeader": "Mode Groupe",
- "policySet": "Ensemble de stratégies",
- "preventAutoAppUpdate": "Empêcher les mises à jour automatiques des applications",
- "preventManagedAppBackup": "Empêcher la sauvegarde d’application iCloud",
- "restartGracePeriodHeader": "Période de grâce de redémarrage",
- "startTimeColumnLabel": "Disponibilité",
- "tracks": "Suivis",
- "uninstallOnRemoval": "Désinstaller lors de la suppression de l'appareil",
- "updateMode": "Priorité de mise à jour",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "Application Web AAD",
- "androidEnterpriseSystemApp": "Application système Android Enterprise",
- "androidForWorkApp": "Application du store Google Play géré",
- "androidLobApp": "Application métier Android",
- "androidStoreApp": "Application de l'Android Store",
- "builtInAndroid": "Application Android intégrée",
- "builtInApp": "Application intégrée",
- "builtInIos": "Application iOS intégrée",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "Application métier iOS",
- "iosStoreApp": "Application de l'App Store iOS",
- "iosVppApp": "Application du programme d'achat en volume (VPP) iOS",
- "lineOfBusinessApp": "Application métier",
- "macOSDmgApp": "macOS app (.DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Application métier macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Suite Office pour macOS",
- "macOSPkgApp": "Application macOS (PKG)",
- "macOSWebClip": "Clip web macOS",
- "macOsVppApp": "Application du programme d'achat en volume macOS",
- "managedAndroidLobApp": "Application métier Android gérée",
- "managedAndroidStoreApp": "Application de l'Android Store gérée",
- "managedGooglePlayApp": "Application du store Google Play géré",
- "managedGooglePlayPrivateApp": "Application privée Google Play géré",
- "managedGooglePlayWebApp": "Lien web à Google Play géré",
- "managedIosLobApp": "Application métier iOS gérée",
- "managedIosStoreApp": "Application de l'App Store iOS gérée",
- "microsoftStoreForBusinessApp": "Application du Microsoft Store pour Entreprises",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store pour Entreprises",
- "officeAddIn": "Complément Office",
- "officeSuiteApp": "Applications Microsoft 365 (Windows 10 et versions ultérieures)",
- "sharePointApp": "Application SharePoint",
- "teamsApp": "Application Teams",
- "webApp": "Lien web",
- "win32CatalogApp": "Application de catalogue Windows (Win32)",
- "winGetPublicApp": "Référentiel de communauté du gestionnaire de package Windows",
- "winGetStoreApp": "Application Microsoft Store (nouvelle)",
- "windowsAppXLobApp": "Application métier appx Windows",
- "windowsClassicApp": "Application Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 et versions ultérieures)",
- "windowsMobileMsiLobApp": "Application métier MSI Windows",
- "windowsPhone81AppXBundleLobApp": "Application métier appx Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "Application métier appx Windows Phone 8.1",
- "windowsPhone81StoreApp": "Application du Windows Phone 8.1 Store",
- "windowsPhoneXapLobApp": "Application métier XAP Windows Phone",
- "windowsStoreApp": "Application Microsoft Store (héritée)",
- "windowsUniversalAppXLobApp": "Application métier appx Windows Universal",
- "windowsUniversalLobApp": "Application métier Windows universelle",
- "windowsWebApp": "Lien web Windows"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Exclu",
- "include": "Inclus",
- "includeAllDevicesVirtualGroup": "Inclus",
- "includeAllUsersVirtualGroup": "Inclus"
- },
- "AssignmentToast": {
- "hideAll": "Masquer toutes les notifications toast",
- "showAll": "Afficher toutes les notifications toast",
- "showReboot": "Afficher les notifications toast pour les redémarrages d'ordinateur"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Oui",
- "notConfigured": "Aucun"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Arrière-plan",
- "displayText": "Téléchargement de contenu dans {0}",
- "foreground": "Premier plan",
- "header": "Priorité d’optimisation de la distribution"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "L'installation de l'application peut forcer le redémarrage de l'appareil",
- "basedOnReturnCode": "Déterminer le comportement en fonction des codes de retour",
- "force": "Intune force le redémarrage obligatoire de l'appareil",
- "suppress": "Aucune action spécifique"
- },
- "FilterType": {
- "exclude": "Exclure",
- "include": "Inclure",
- "none": "Aucun"
- },
- "InstallIntent": {
- "available": "Disponible pour les appareils inscrits",
- "availableWithoutEnrollment": "Disponible avec ou sans inscription",
- "notApplicable": "Non applicable",
- "required": "Obligatoire",
- "uninstall": "Désinstaller"
- },
- "SettingType": {
- "assignmentType": "Type d'attribution",
- "deviceLicensing": "Type de licence",
- "installContext": "Désinstaller lors de la suppression de l'appareil",
- "toastSettings": "Notifications de l'utilisateur final",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Par défaut",
- "postponed": "Différé",
- "priority": "Haute priorité"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Configurez les appareils pour l’approvisionnement initial.",
- "title": "Préparation de l'appareil"
- },
- "EnrollmentSettings": {
- "description": "Configurez les paramètres d’inscription, tels que le blocage de l’inscription et l’attribution aux utilisateurs.",
- "title": "Paramètres d'inscription"
- },
- "OSConfiguration": {
- "menuDescription": "Configurez les paramètres que les utilisateurs peuvent utiliser pour récupérer Windows à partir d'un lecteur flash amorçable.",
- "menuTitle": "Configuration de la récupération du système d’exploitation Windows"
- },
- "coManagementAuthorityDesc": "Configurer les paramètres de cogestion pour l’intégration Configuration Manager",
- "coManagementAuthorityTitle": "Paramètres de cogestion ",
- "deploymentProfiles": "Profils Windows AutoPilot Deployment",
- "description": "Découvrez les sept différentes façons d'inscrire un PC Windows 10/11 dans Intune par les utilisateurs ou les administrateurs.",
- "descriptionLabel": "Méthodes d’inscription Windows",
- "enrollmentStatusPage": "Page d'état de l'inscription"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Approuver automatiquement toutes les mises à jour de pilote recommandées",
- "manual": "Approuver et déployer manuellement les mises à jour de pilotes"
- },
- "BulkActions": {
- "button": "Actions en bloc"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Méthode d’approbation :"
- },
- "DeploymentDeferralInDays": {
- "label": "Mettre les mises à jour à disposition après",
- "units": "(jours)",
- "value": "{0} jours"
- },
- "DriverAction": {
- "header": "Sélectionnez une action ci-dessous.",
- "label": "Action du pilote",
- "placeholder": "Sélectionner une action"
- },
- "IncludedDrivers": {
- "label": "Pilotes inclus"
- },
- "SelectDrivers": {
- "header": "Sélectionnez les pilotes à inclure dans votre action en bloc"
- },
- "SelectDriversToInclude": {
- "button": "Sélectionner les pilotes à inclure"
- },
- "SelectLessDrivers": {
- "validation": "Au plus une centaine de pilotes peuvent être sélectionnés"
- },
- "SelectMoreDrivers": {
- "validation": "Au moins un pilote doit être sélectionné"
- },
- "SelectedDrivers": {
- "label": "Pilotes sélectionnés"
- },
- "availabilityDate": "Rendre disponible dans Windows Update",
- "bladeTitle": "Mises à jour du pilote Windows 10 et versions ultérieures (préversion)",
- "lastSync": "Dernière synchronisation :",
- "lastSyncDefaultText": "Collection d’inventaire initiale en attente",
- "loadError": "Échec du chargement!"
- },
- "DriverStatus": {
- "approved": "Approuvé",
- "declined": "Refusé",
- "export": "Exportation des pilotes recommandés",
- "needsReview": "Révision nécessaire",
- "paused": "En pause"
- },
- "DriversToReview": {
- "text": "{0} pour évaluer"
- },
- "Subtitle": {
- "automatic": "Stratégie de mise à jour du pilote d’approbation automatique",
- "manual": "Stratégie de mise à jour du pilote d’approbation manuel"
- },
- "SyncNotification": {
- "failure": "Synchronisation impossible{0}",
- "failureDescription": "Nous avons rencontré une erreur et n’avons pas pu effectuer la synchronisation demandée. Veuillez réessayer.",
- "pending": "{0} Synchronisation en cours",
- "pendingDescription": "Nous récupérons les données les plus récentes. Ce processus peut prendre plusieurs minutes.",
- "success": "{0}Synchronisation terminée",
- "successDescription": "Synchronisation avec le service WUfB terminée à {0}"
- },
- "SyncSpinner": {
- "text": "Une synchronisation est en cours. Cela peut prendre plusieurs minutes. Recherchez une alerte ou réexaminez-la dans quelques minutes."
- },
- "TabName": {
- "basics": "Informations de base",
- "driverUpdateSettings": "Paramètres",
- "otherDrivers": "Autres pilotes",
- "properties": "Propriétés",
- "recommendedDrivers": "Pilotes recommandés"
- },
- "driverAddFilter": "Ajouter un filtre",
- "driverApplicableDevices": "Appareils applicables",
- "driverApprovalStatus": "État",
- "driverBulkActions": "Actions en bloc",
- "driverClass": "Classe de pilote",
- "driverCount": "Affichage de {0} à {1} enregistrements sur {2}",
- "driverFilterNoneSelected": "Aucun utilisateur sélectionné",
- "driverManufacturer": "Fabricant",
- "driverName": "Nom du pilote",
- "driverNameLower": "déploiement de la mise à jour des pilotes Windows",
- "driverNameUpper": "Déploiement de la mise à jour des pilotes Windows",
- "driverRefresh": "Actualiser",
- "driverReleaseDate": "Date de sortie",
- "driverSearch": "Rechercher",
- "driverSearchKeyword": "Entrer un mot clé de recherche",
- "driverVersion": "Version",
- "firstDeploymentDate": "Premier déploiement",
- "infoBoxText": "Le remplissage de l’inventaire peut prendre jusqu’à 24 heures après l’affectation et la création d’une stratégie.",
- "textBlockText": "Sélectionnez les paramètres d'approbation et de déploiement de votre politique. Choisissez de configurer une politique pour approuver et déployer les mises à jour automatiquement ou manuellement. La méthode d'approbation ne peut pas être modifiée une fois qu'une politique est créée, mais les modifications des approbations et des détails de déploiement des pilotes individuels seront possibles une fois qu'un inventaire sera construit pour les périphériques affectés."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Utilisez ces paramètres pour savoir quels utilisateurs installent des applications dont l'utilisation n'est pas approuvée dans votre entreprise. Sélectionnez le type de liste d'applications restreintes :
\r\n Applications interdites - Liste des applications pour lesquelles vous voulez être informé quand elles sont installées par les utilisateurs. \r\n Applications approuvées - Liste des applications dont l'utilisation est approuvée dans votre entreprise. Quand les utilisateurs installent une application qui n'est pas dans cette liste, vous en êtes informé. \r\n ",
- "androidZebraMxZebraMx": "Configurez les appareils Zebra en chargeant un profil MX au format XML.",
- "iosDeviceFeaturesAirprint": "Utilisez ces paramètres pour configurer la connexion automatique des appareils iOS aux imprimantes compatibles AirPrint sur votre réseau. Vous devrez indiquer l'adresse IP et le chemin de ressource de vos imprimantes.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Configurez une extension d’application qui active l’authentification unique (SSO) pour les appareils exécutant iOS 13.0 ou version ultérieure.",
- "iosDeviceFeaturesHomeScreenLayout": "Configurez la disposition du dock et des écrans d’accueil sur les appareils iOS. Certains appareils peuvent limiter le nombre d’éléments affichables.",
- "iosDeviceFeaturesIOSWallpaper": "Affichez une image destinée à l’écran d’accueil et/ou l’écran de verrouillage des appareils iOS.\r\n Pour afficher une image unique dans chaque emplacement, créez un profil avec l’image de l’écran de verrouillage et un autre avec l’image de l’écran d’accueil.\r\n Affectez ensuite les deux profils à vos utilisateurs.\r\n \r\n
\r\n
Taille de fichier max. : 750 Ko
\r\n
Type de fichier : PNG, JPG ou JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Spécifiez les paramètres de notification pour les applications. Prend en charge iOS 9.3 et ultérieur.",
- "iosDeviceFeaturesSharedDevice": "Spécifiez le texte facultatif affiché sur l'écran verrouillé. Il est pris en charge sur iOS 9.3 et ultérieur. En savoir plus",
- "iosGeneralApplicationRestrictions": "Utilisez ces paramètres pour savoir quels utilisateurs installent des applications dont l'utilisation n'est pas approuvée dans votre entreprise. Sélectionnez le type de liste d'applications restreintes :
\r\n Applications interdites - Liste des applications pour lesquelles vous voulez être informé quand elles sont installées par les utilisateurs. \r\n Applications approuvées - Liste des applications dont l'utilisation est approuvée dans votre entreprise. Quand les utilisateurs installent une application qui n'est pas dans cette liste, vous en êtes informé. \r\n ",
- "iosGeneralApplicationVisibility": "Utilisez la liste des applications affichées pour spécifier les applications iOS que l'utilisateur peut afficher ou lancer. Utilisez la liste des applications masquées pour spécifier les applications iOS que l'utilisateur ne peut pas afficher ou lancer.",
- "iosGeneralAutonomousSingleAppMode": "Les applications que vous ajoutez à cette liste et que vous affectez à un appareil peuvent verrouiller l'appareil pour qu'il exécute uniquement cette application au démarrage, ou verrouiller l'appareil quand une action spécifique est exécutée (par exemple, un test). Quand l'action est terminée, ou si vous annulez la restriction, l'appareil retourne à l'état normal.",
- "iosGeneralKiosk": "Le mode kiosque verrouille plusieurs paramètres sur un appareil ou spécifie l'application unique que les utilisateurs peuvent exécuter sur un appareil. Ce mode est utile dans certains environnements, par exemple, un magasin où vous présentez un appareil sur lequel doit s'exécuter uniquement une application de démonstration.",
- "macDeviceFeaturesAirprint": "Utilisez ces paramètres pour configurer la connexion automatique des appareils macOS aux imprimantes compatibles AirPrint sur votre réseau. Vous aurez besoin de l'adresse IP et du chemin de ressource de vos imprimantes.",
- "macDeviceFeaturesAssociatedDomains": "Configurez les domaines associés pour qu’ils partagent les données et les informations d’identification de connexion entre les applications et sites web de votre organisation. Ce profil peut être appliqué aux appareils qui exécutent macOS 10.15 ou version ultérieure.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Configurez une extension d’application qui active l’authentification unique (SSO) pour les appareils qui exécutent macOS 10.15 ou version ultérieure.",
- "macDeviceFeaturesLoginItems": "Choisissez les applications, les fichiers et les dossiers à ouvrir quand les utilisateurs se connectent à leurs appareils. Si vous ne voulez pas que les utilisateurs changent le mode d'ouverture des applications sélectionnées, vous pouvez masquer l'application dans la configuration utilisateur.",
- "macDeviceFeaturesLoginWindow": "Configurez l'apparence de l'écran de connexion macOS et les fonctions disponibles pour les utilisateurs avant et après leur connexion.",
- "macExtensionsKernelExtensions": "Utilisez ces paramètres pour configurer la stratégie d'extension du noyau sur les appareils macOS exécutant la version 10.13.2 ou ultérieure.",
- "macGeneralDomains": "Les e-mails reçus ou envoyés par l'utilisateur qui ne correspondent pas aux domaines que vous spécifiez ici sont marqués comme non approuvés.",
- "windows10EndpointProtectionApplicationGuard": "Pendant l'utilisation de Microsoft Edge, Microsoft Defender Application Guard protège votre environnement des sites qui n'ont pas été définis comme approuvés par votre organisation. Quand des utilisateurs visitent des sites non listés dans les limites de votre réseau isolé, les sites sont ouverts dans une session de navigation virtuelle dans Hyper-V. Les sites approuvés sont définis par une limite réseau, qui peut être configurée dans Configuration de l'appareil. Notez que cette fonctionnalité est disponible seulement pour les appareils exécutant Windows 10,64 bits ou une version ultérieure.",
- "windows10EndpointProtectionCredentialGuard": "L'activation de Credential Guard active les paramètres obligatoires suivants :\r\n \r\n
\r\n
Activer la sécurité basée sur la virtualisation : active la sécurité basée sur la virtualisation (VBS) au prochain redémarrage. La sécurité basée sur la virtualisation utilise l'hyperviseur Windows pour prendre en charge les services de sécurité.
\r\n \r\n
Démarrage sécurisé avec accès direct à la mémoire : active VBS avec le démarrage sécurisé et l'accès direct à la mémoire (DMA).
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Choisissez d'autres applications devant être auditées ou dont l'exécution peut être approuvée par Microsoft Defender Application Control. L'exécution des composants Windows et de toutes les applications du Windows Store est automatiquement approuvée.
\r\n Les applications ne sont pas bloquées quand elles s'exécutent en mode « Audit uniquement ». Le mode « Audit uniquement » journalise tous les événements dans les journaux du client local.\r\n ",
- "windows10GeneralPrivacyPerApp": "Ajoutez des applications qui doivent avoir un comportement de confidentialité différent de celui défini dans « Confidentialité par défaut ».",
- "windows10NetworkBoundaryNetworkBoundary": "La limite réseau correspond à la liste des ressources d'entreprise, comme le domaine hébergé dans le cloud et les plages d'adresses IP, accessibles aux ordinateurs du réseau d'entreprise. Définissez des limites réseau pour appliquer des stratégies visant à protéger les données dans ces emplacements.",
- "windowsHealthMonitoring": "Configurez la stratégie de monitoring de l’intégrité de Windows.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone peut empêcher les utilisateurs d'installer ou de lancer les applications spécifiées dans la liste des applications interdites ou celles non spécifiées dans la liste des applications approuvées. Toutes les applications gérées doivent être ajoutées à la liste approuvée."
- },
- "Inputs": {
- "accountDomain": "Domaine du compte",
- "accountDomainHint": "Exemple : contosodomain",
- "accountDomainInfoBalloon": "Spécifiez le domaine du compte de l'utilisateur.",
- "accountTypeInfoBalloon": "Spécifiez le type de compte en cours de configuration selon le modèle d'authentification",
- "allowContactSetting": "Autoriser l'utilisateur à changer le paramètre des contacts",
- "allowContactSyncInfoBalloon": "Indiquez si l'utilisateur est autorisé à changer le paramètre de synchronisation des contacts",
- "allowUserChange": "Autoriser l'utilisateur à changer le paramètre",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Entrez un nom de package comme com.microsoft.word",
- "androidUrlValidation": "Entrez une URL valide semblable à celle-ci : https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "Contexte d'installation d'application",
- "appUrlLabel": "URL de l'App Store",
- "appleUrlValidation": "Entrez une URL valide semblable à celle-ci : https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Type d'appareil applicable",
- "assignmentActionLabel": "Mode",
- "authenticationMethodInfoBalloon": "Indiquez la méthode d'authentification pour l'utilisateur",
- "authenticationMetod": "Méthode d'authentification",
- "authenticationType": "Type d'authentification",
- "authenticationTypeInfoBalloon": "Indiquer le type d'authentification pour l'utilisateur",
- "availableLicenseCount": "Licences disponibles",
- "basicAuth": "Authentification de base",
- "biometricsInfoBalloon": "Des données biométriques, comme TouchID ou FaceID, peuvent être demandées aux utilisateurs pour leur permettre d'accéder à l'application sur leur appareil. Le cas échéant, les données biométriques sont utilisées en plus de la méthode d'authentification sélectionnée dans ce profil. N'activez pas ce paramètre si des stratégies Intune App Protection sont déployées, car la stratégie de protection des applications inclut des conditions d'accès préalables à l'accès aux données managées. L'activation des deux entraînerait l'affichage de plusieurs invites d'accès à Outlook Mobile. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
- "bookNameLabel": "Nom du livre",
- "bundleDescriptionHint": "Entrez une description des applications incluses.",
- "calendar": "Calendrier",
- "categoryLabel": "Catégorie",
- "categoryNameLabel": "Nom par défaut",
- "certProfileType": "Type de profil de certificat",
- "certificate": "Certificat",
- "certificates": "Certificats",
- "commandLineLabel": "Arguments de ligne de commande",
- "commandLineSizeHint": "Le texte des arguments de ligne de commande ne doit pas dépasser 1 024 caractères",
- "configurationSettingsFormatLabel": "Format des paramètres de configuration",
- "configurationSettingsLabel": "Format des paramètres",
- "contactSync": "Enregistrer les contacts",
- "contactSyncInfoBalloon": "L'enregistrement de contacts dans le carnet d'adresses natif de l'appareil mobile permet de lier les nouveaux appels et SMS aux contacts Outlook existants de l'utilisateur. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé.",
- "contacts": "Contacts ",
- "createdDateTime": "Création",
- "defaultCategoryHint": "Impossible de changer les catégories par défaut",
- "deploySMimeCertsFromIntune": "Déployer des certificats S/MIME à partir d'Intune",
- "descriptionGenericLabel": "Description",
- "descriptionHint": "Entrez une description...",
- "descriptionLabel": "Description",
- "descriptionSizeHint": "La longueur de la description ne doit pas dépasser 10 000 caractères",
- "developerLabel": "Développeur",
- "developerSizeHint": "La longueur maximale du nom de développeur est 256 caractères.",
- "disable": "Désactiver",
- "disabled": "Désactivé",
- "displayNameLabel": "Nom",
- "displayVersionHint": "Entrer la version de l’application",
- "displayVersionLabel": "Version de l’application",
- "displayVersionLengthCheck": "La longueur de la version d’affichage doit être de 130 caractères maximum",
- "eBookCategoryNameLabel": "Nom par défaut",
- "emailAccount": "Nom du compte e-mail",
- "emailAccountHint": "par exemple, e-mail de l'entreprise",
- "emailAccountInfoBalloon": "Spécifiez le nom d'affichage du compte e-mail tel qu'il apparaîtra aux utilisateurs sur leurs appareils",
- "emailAddressAttribute": "Attribut d’adresse e-mail de Microsoft Entra ID",
- "emailAddressInfoBalloon": "Spécifier l'adresse e-mail à utiliser pour l'envoi et la réception d'e-mails",
- "emailServer": "Serveur e-mail",
- "emailServerHint": "par ex., mail.contoso.com",
- "emailServerInfoBalloon": "Spécifier le nom d'hôte de votre serveur Exchange",
- "enable": "Activer",
- "enableSMime": "Activer S/MIME",
- "enabled": "Activé",
- "encryptAllEmails": "Chiffrer tous les e-mails",
- "encryptionCertificates": "Certificats de chiffrement",
- "endUserNotifications": "Notifications de l'utilisateur final",
- "enrollmentTypeLabel": "Type d'inscription de l'appareil",
- "externalRecipients": "Info courrier Destinataires externes",
- "externalRecipientsInfoBalloon": "L’info courrier Destinataires externes s’affiche si l’expéditeur ajoute un destinataire externe ou un groupe de distribution contenant des destinataires externes. Cette info courrier informe les expéditeurs que le message qu’ils composent va sortir de l’organisation, les incitant ainsi à adapter la formulation, le ton et le contenu de leur message. Disponible uniquement pour les comptes Exchange Online et les comptes locaux tirant parti de l’authentification moderne hybride. S’il n’est pas configuré, le paramètre d’application par défaut a la valeur Activé.",
- "focusedInbox": "Boîte de réception Prioritaire",
- "focusedInboxInfoBalloon": "La boîte de réception Prioritaire sépare votre boîte de réception en deux onglets : Prioritaire et Autres. Les e-mails les plus importants apparaissent sous l'onglet Prioritaire, tandis que les autres restent facilement accessibles, mais en retrait, sous l'onglet Autres. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Activé.",
- "fullScreenEnabledLabel": "Plein écran",
- "gmailNineAmountOfEmail": "Nombre d'e-mails à synchroniser",
- "gmailNineAuthenticationMethodInfoBalloon": "Sélectionnez le mode d'authentification des utilisateurs sur le serveur de messagerie. Utilisez des certificats pour fournir aux utilisateurs finaux l'expérience la plus sécurisée et la plus fluide. L'authentification basée sur les certificats n'est pas encore disponible, car les profils de certificat SCEP et PKCS des appareils de propriétaires ne sont pas disponibles. ",
- "gmailNineCertificateUPNInfoBalloon": "Le certificat doit inclure le nom d'utilisateur principal (UPN) comme autre nom de l'objet.",
- "gmailNineEmailAddressInfoBalloon": "L’attribut que Intune obtient de Microsoft Entra ID pour générer dynamiquement l’adresse e-mail qui sera utilisée par le profil, par exemple MyName@contoso.com (UPN). En savoir plus sur les attributs Microsoft Entra pour les profils de messagerie.",
- "gmailNineEmailServerInfoBalloon": "Emplacement Exchange (URL) du serveur de messagerie auquel l'application spécifiée se connecte pour récupérer les e-mails.",
- "gmailNineEmailSynchronizeInfoBalloon": "Contrôle la quantité d'e-mails synchronisés par le client.",
- "gmailNineSSLInfoBalloon": "Active SSL pour sécuriser toutes les communications avec le serveur de messagerie.",
- "gmailNineUsernameInfoBalloon": "L’attribut que Intune obtient de Microsoft Entra ID pour générer dynamiquement le nom d'utilisateur qui sera utilisé par le profil, par exemple MyName@contoso.com (UPN) ou MyName (nom d'utilisateur). En savoir plus sur les attributs Microsoft Entra pour les profils de messagerie.",
- "ignoreManifestScope": "Ignorer l’étendue du manifeste",
- "ignoreVersionDetection": "Ignorer la version de l'application",
- "informationUrlLabel": "URL d'informations",
- "informationUrlSizeHint": "La longueur maximale de l’URL d’informations est de 1 024 caractères",
- "installAsManaged": "Installer comme étant managée",
- "installationSourceLabel": "Type d'application",
- "installerTypeInfoBalloon": "Type de programme d’installation du package d’application.",
- "installerTypeLabel": "Type de programme d'installation",
- "isFeatured": "Afficher ceci en tant qu’application à la une dans le Portail d’entreprise",
- "isMAMEnabledToggleLabel": "Oui",
- "lastModifiedDateTime": "Heure de la dernière mise à jour",
- "ldapUrl": "URL LDAP",
- "licensingType": "Prend en charge l'attribution d'un contexte d'appareil",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Système d'exploitation minimal",
- "modernAuth": "Authentification moderne",
- "nameHint": "Entrer un nom",
- "nameLabel": "Nom",
- "nameSizeHint": "La longueur maximale du nom est 512 caractères.",
- "notConfigured": "Non configuré",
- "notesLabel": "Remarques",
- "notesSizeHint": "La longueur maximale du texte des commentaires est 1 024 caractères.",
- "notificationType": "Type de notification",
- "oneDay": "Une journée",
- "oneMonth": "Un mois",
- "oneWeek": "Une semaine",
- "outlookSMimeSettings": "Paramètres S/MIME Outlook",
- "ownerLabel": "Propriétaire",
- "ownerSizeHint": "La longueur maximale du nom de propriétaire est 256 caractères.",
- "packageIdLabel": "Identificateur de package",
- "packageNameLabel": "Nom du package",
- "pivCredentialNotConfigured": "Vous n'avez pas sélectionné d'émetteur d'informations d'identification dérivées pour votre locataire. Vous devez en configurer un pour pouvoir appliquer cette stratégie aux appareils.",
- "platformLabel": "Plateforme",
- "policyDescriptionLabel": "Description",
- "policyNameLabel": "Nom",
- "preComposedIconEnabled": "Précomposé",
- "primarySMTPAddress": "Adresse SMTP principale",
- "privacyUrlLabel": "URL de la déclaration de confidentialité",
- "publisherHint": "Entrez un nom d'éditeur",
- "publisherLabel": "Éditeur",
- "publisherSizeHint": "La longueur du nom d'éditeur doit être comprise entre 2 et 1 024 caractères (inclus)",
- "require": "Exiger",
- "requireBiometrics": "Exiger la biométrie pour accéder à l'application",
- "sAMAccountName": "SamAccountName",
- "scopeTagsRequired": "Au moins une balise d'étendue est obligatoire",
- "searchAppLabel": "Sélectionner une application",
- "searchAppLinkText": "Rechercher dans l'App Store",
- "searchWinGetPublicRepositoryLinkText": "Rechercher le référentiel de communauté du gestionnaire de package Windows",
- "searchWinGetStoreRepositoryLinkText": "Rechercher l’application Microsoft Store (nouvelle)",
- "selectAAD": "Sélectionner un attribut Microsoft Entra",
- "selectAppFileLabel": "Sélectionner un fichier",
- "selectAppFileLinkText": "Sélectionner un fichier de package d'application",
- "selectAppFileToUpdateLabel": "Sélectionnez le fichier à mettre à jour",
- "selectAuthMethod": "Sélectionner une méthode d'authentification",
- "selectAuthType": "Sélectionner un type d'authentification",
- "selectCatalogAppLabel": "Sélectionner une application",
- "selectCatalogAppLinkText": "Rechercher dans le catalogue d’applications d’entreprise",
- "selectCertificate": "Sélectionner un certificat",
- "signAllEmails": "Signer tous les e-mails",
- "signingCertificates": "Certificats de signature",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Description de la suite",
- "suiteNameLabel": "Nom de la suite",
- "targetApplicationBundleIdentifier": "Identificateur de bundle d’application cible",
- "targetedPlatformsLabel": "Plateforme ciblée",
- "tasks": "Tâches",
- "threeDays": "Trois jours",
- "totalLicenseCount": "Nombre total de licences",
- "twoWeeks": "Deux semaines",
- "unifiedAssignmentsLabel": "Affecter à :",
- "unlimited": "Illimité",
- "urlHint": "Entrez une URL valide",
- "useManagedBrowserHint": "Android et iOS uniquement. En savoir plus",
- "useManagedBrowserLabel": "Exiger l'ouverture de ce lien dans Managed Browser",
- "userPrinicipalName": "Nom d'utilisateur principal",
- "username": "Nom d'utilisateur",
- "usernameAttribute": "Attribut de nom d’utilisateur de Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Spécifier le nom d'utilisateur principal pour le profil e-mail utilisé pour authentifier le compte",
- "usernamePassword": "Nom d'utilisateur et mot de passe",
- "webAppUrlHint": "Entrer une URL valide commençant par http:// ou https://",
- "webAppUrlLabel": "URL de l'application",
- "webAppUrlSizeHint": "La longueur maximale de l’URL de l’application est de 1024 caractères",
- "windowsUrlValidation": "Entrez une URL valide semblable à celle-ci : https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "Données XML entrées",
- "xmlFormatInvalid": "Le format de la stratégie XML n'est pas valide.",
- "xmlTooLarge": "La taille d'entrée doit être inférieure à 1 Mo."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Échec de la suppression de {0}",
- "failureCa": "Échec de la suppression de {0}, car elle est référencée par des stratégies d’autorité de certification",
- "modifying": "Suppression de {0}",
- "success": "{0} supprimé"
- },
- "Notify": {
- "failure": "Échec de la mise à jour de {0}",
- "modifying": "Modification de {0}",
- "success": "{0} mis à jour"
- },
- "menuLabel": "Contexte d’authentification"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "En savoir plus sur l’obligation de méthodes d’authentification satisfaites par les fournisseurs de fédération.",
- "certificate": "Authentification par certificat",
- "infoBubble": "Spécifiez la méthode d'authentification requise, qui doit être suivie par le fournisseur de fédération, tel qu'ADFS.",
- "multifactor": "Authentification multifacteur",
- "require": "Exiger la méthode d'authentification fédérée (préversion)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "La stratégie de session de navigateur persistante ne fonctionne correctement que lorsque l'option « Toutes les applications cloud » est sélectionnée. Mettez à jour votre sélection d’applications cloud."
- },
- "Option": {
- "always": "Toujours persistant",
- "help": "Une session de navigateur persistante autorise les utilisateurs à rester connectés après fermeture et réouverture de la fenêtre du navigateur. \n
\n
Ce paramètre fonctionne correctement lorsque l'option « Toutes les applications cloud » est sélectionnée
\n
Cela n’affecte pas la durée de vie des jetons ou le paramètre de fréquence de connexion.
\n
Cela remplace la stratégie « Afficher l'option pour rester connecté » dans la personnalisation de l'entreprise.
\n
L'option « Jamais persistant » remplace toute réclamation d'authentification unique persistante en provenance de services d’authentification fédérée.
\n
L'option « Jamais persistant » empêche l’authentification unique sur les appareils mobiles entre différentes applications, et entre les applications et le navigateur mobile de l’utilisateur.
\n",
- "label": "Session de navigateur persistante",
- "never": "Jamais persistant"
- },
- "Warning": {
- "allApps": "La stratégie de session de navigateur persistante ne fonctionne correctement que lorsque l'option « Toutes les applications cloud » est sélectionnée. Modifiez votre sélection d’applications cloud. Cliquez ici pour en savoir plus."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Heures ou jours",
- "value": "Fréquence"
- },
- "Option": {
- "Day": {
- "plural": "{0} jours",
- "singular": "1 jour"
- },
- "Hour": {
- "plural": "{0} heures",
- "singular": "1 heure"
- },
- "daysOption": "Jours",
- "everytime": "À chaque fois",
- "help": "Durée avant qu’un utilisateur soit invité à se reconnecter lors de la tentative d’accès à une ressource. Le paramètre par défaut est une fenêtre dynamique de 90 jours, c’est-à-dire que les utilisateurs doivent s’authentifier à nouveau à la première tentative d’accès à une ressource après un temps d'inactivité de 90 jours ou plus sur leur ordinateur.",
- "hoursOption": "Heures",
- "label": "Fréquence de connexion",
- "placeholder": "Sélectionner les unités"
- }
- },
- "mainOption": "Modifier la durée de vie de la session",
- "mainOptionHelp": "Configurer la fréquence à laquelle les utilisateurs seront invités et indiquer si les sessions de navigateur seront persistantes. Les applications qui ne prennent pas en charge les protocoles d’authentification modernes ne pourront pas honorer ces stratégies. Dans ce cas, contactez le développeur d’applications."
- },
- "SingleSelectorActive": {
- "failed": "Désolé... Nous n’avons pas pu charger ces données.",
- "reattempt": "Chargement des données. Retentez l' {0} sur {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Choisir des rôles d’annuaire"
- },
- "Excluded": {
- "gridAria": "Liste des utilisateurs exclus"
- },
- "Included": {
- "gridAria": "Liste des utilisateurs inclus"
- },
- "Validation": {
- "customRoleIncluded": "« Rôles d'annuaire » : inclut au moins un rôle personnalisé",
- "customRoleSelected": "Au moins un rôle personnalisé est sélectionné",
- "failed": "« {0} » doit être configuré",
- "roles": "Sélectionner au moins un rôle",
- "usersGroups": "Sélectionner au moins un utilisateur ou un groupe"
- },
- "learnMore": "Contrôlez l’accès en fonction des personnes auxquelles la stratégie s’applique, telles que des utilisateurs et des groupes, des identités de charge de travail, des rôles d’annuaire ou des invités externes."
- },
- "advancedTabText": "Avancé",
- "allCloudAppsErrorBox": "L'option « Toutes les applications cloud » doit être sélectionnée quand l’autorisation « Exiger une modification du mot de passe » est sélectionnée",
- "allCloudAppsReauth": "« Toutes les applications cloud » doivent être sélectionnées lorsque le contrôle de session « Fréquence de connexion à chaque fois » et la condition « Risque de connexion » sont sélectionnés",
- "allCloudOrSpecificApps": "Le contrôle de session « Fréquence de connexion à chaque fois » nécessite la sélection de « toutes les applications cloud » ou d’applications spécifiquement prises en charge",
- "allDayCheckboxLabel": "Toute la journée",
- "allDevicePlatforms": "N'importe quel périphérique",
- "allGuestUserInfoContent": "Inclut les invités Microsoft Entra B2B, mais pas les invités SharePoint B2B",
- "allGuestUserLabel": "Tous les utilisateurs invités et externes",
- "allRiskLevelsOption": "Tous niveaux de risque",
- "allTrustedLocationLabel": "Tous les emplacements approuvés",
- "allUserGroupSetSelectorLabel": "Tous les utilisateurs et groupes sélectionnés",
- "allUsersReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » nécessite la sélection de « Tous les utilisateurs »",
- "allUsersString": "Tous les utilisateurs",
- "and": "{0} ET {1}",
- "andWithGrouping": "({0}) ET {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "N’importe quelle application cloud",
- "appContextOptionInfoContent": "Balise d'authentification demandée",
- "appContextOptionLabel": "Balise d'authentification demandée (préversion)",
- "appContextUriPlaceholder": "Exemple : uri:contoso.com:level3",
- "appEnforceInfoBubble": "Les restrictions appliquées par l'application peuvent nécessiter des configurations supplémentaires de la part de l'administrateur au sein des applications cloud. Celles-ci ne seront valides que pour les nouvelles sessions.",
- "appNotSetSeletorLabel": "0 application cloud sélectionnée",
- "appReauthNotSupported": "Cette application ne prend pas en charge le contrôle de session « Fréquence de connexion à chaque fois ».",
- "applyConditionClientAppInfoBalloonContent": "Configurer les applications clientes pour appliquer la stratégie à des applications clientes spécifiques",
- "applyConditionDevicePlatformInfoBalloonContent": "Configurer les plateformes d'appareils pour appliquer la stratégie à des plateformes spécifiques",
- "applyConditionDeviceStateInfoBalloonContent": "Configurer l'état des appareils pour appliquer la stratégie à des états d'appareils spécifiques",
- "applyConditionLocationInfoBalloonContent": "Configurer les emplacements pour appliquer la stratégie aux emplacements approuvés/non approuvés",
- "applyConditionSigninRiskInfoBalloonContent": "Configurer le risque de connexion pour appliquer la stratégie aux niveaux de risque sélectionnés",
- "applyConditionUserRiskInfoBalloonContent": "Configurer le risque utilisateur pour appliquer la stratégie aux niveaux de risque sélectionnés",
- "applyConditonLabel": "Configurer",
- "ariaLabelPolicyDisabled": "La stratégie est désactivée",
- "ariaLabelPolicyEnabled": "La stratégie est activée",
- "ariaLabelPolicyReportOnly": "La stratégie est en mode Rapport uniquement",
- "blockAccess": "Bloquer l'accès",
- "builtInDirectoryRoleLabel": "Rôles d’annuaire intégrés",
- "casCustomControlInfo": "Les stratégies personnalisées doivent être configurées dans le portail Cloud App Security. Ce contrôle fonctionne instantanément pour les applications disponibles et peut être intégré automatiquement pour n'importe quelle application. Cliquez ici pour en savoir plus sur les deux scénarios.",
- "casInfoBubble": "Ce contrôle fonctionne pour différentes applications cloud.",
- "casPreconfiguredControlInfo": "Ce contrôle fonctionne instantanément pour les applications disponibles et peut être intégré automatiquement pour n'importe quelle application. Cliquez ici pour en savoir plus sur les deux scénarios.",
- "cert64DownloadCol": "Télécharger un certificat en base64",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Télécharger le certificat",
- "certDurationCol": "Expiration",
- "certDurationStartCol": "Valide depuis",
- "certName": "VpnCert",
- "certainApps": "Seules les applications spécifiquement prises en charge sont activées pour « Fréquence de connexion à chaque fois » si les octrois « Exiger une authentification multifacteur » et « Exiger une modification de mot de passe » ne sont pas sélectionnés",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Choisir les applications",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Applications choisies",
- "chooseApplicationsEmpty": "Aucune application",
- "chooseApplicationsNone": "Aucun",
- "chooseApplicationsNoneFound": "« {0} » est introuvable. Essayez un autre nom ou identifiant.",
- "chooseApplicationsPlural": "{0} et {1} autres ",
- "chooseApplicationsReAuthEverytimeInfo": "Vous recherchez votre application ? Certaines applications ne peuvent pas être utilisées avec le contrôle de session « Exiger une réauthentification – à chaque fois »",
- "chooseApplicationsRemove": "Supprimer",
- "chooseApplicationsReturnedPlural": "{0} applications trouvées",
- "chooseApplicationsReturnedSingular": "1 application trouvée",
- "chooseApplicationsSearchBalloon": "Recherchez une application en entrant son nom ou identifiant.",
- "chooseApplicationsSearchHint": "Rechercher des applications...",
- "chooseApplicationsSearchLabel": "Applications",
- "chooseApplicationsSearching": "Recherche en cours...",
- "chooseApplicationsSelect": "Sélectionner",
- "chooseApplicationsSelected": "Sélectionné",
- "chooseApplicationsSingular": "{0} et 1 autre",
- "chooseApplicationsTooMany": "Impossible d'afficher tous les résultats. Filtrez à l’aide de la zone de recherche.",
- "chooseLocationCorpnetItem": "Réseau d'entreprise",
- "chooseLocationSelectedLocationsLabel": "Emplacements sélectionnés",
- "chooseLocationTrustedIpsItem": "Adresses IP approuvées pour l’authentification multifacteur",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Choisir les emplacements",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Emplacements choisis",
- "chooseLocationsEmpty": "Aucun emplacement",
- "chooseLocationsExcludedSelectorTitle": "Sélectionner",
- "chooseLocationsIncludedSelectorTitle": "Sélectionner",
- "chooseLocationsNone": "Aucun",
- "chooseLocationsNoneFound": "« {0} » est introuvable. Essayez un autre nom ou identifiant.",
- "chooseLocationsPlural": "{0} et {1} autres ",
- "chooseLocationsRemove": "Supprimer",
- "chooseLocationsReturnedPlural": "{0} emplacements trouvés",
- "chooseLocationsReturnedSingular": "1 emplacement trouvé",
- "chooseLocationsSearchBalloon": "Recherchez un emplacement en entrant son nom.",
- "chooseLocationsSearchHint": "Rechercher des emplacements...",
- "chooseLocationsSearchLabel": "Emplacements",
- "chooseLocationsSearching": "Recherche en cours...",
- "chooseLocationsSelect": "Sélectionner",
- "chooseLocationsSelected": "Sélectionné",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Sélectionner",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Sélectionner",
- "chooseLocationsSingular": "{0} et 1 autre",
- "chooseLocationsTooMany": "Impossible d'afficher tous les résultats. Filtrez à l’aide de la zone de recherche.",
- "claimProviderAddCommandText": "Nouveau contrôle personnalisé",
- "claimProviderAddNewBladeTitle": "Nouveau contrôle personnalisé",
- "claimProviderDeleteCommand": "Supprimer",
- "claimProviderDeleteDescription": "Êtes-vous sûr de vouloir supprimer « {0} » ? Cette action ne peut pas être annulée.",
- "claimProviderDeleteTitle": "Êtes-vous sûr ?",
- "claimProviderEditInfoText": "Entrez le JSON pour les contrôles personnalisés donnés par vos fournisseurs de revendication.",
- "claimProviderNotificationCreateDescription": "Création du contrôle personnalisé nommé « {0} »",
- "claimProviderNotificationCreateFailedDescription": "La création du contrôle personnalisé « {0} » a échoué. Réessayez ultérieurement.",
- "claimProviderNotificationCreateFailedTitle": "Impossible de créer le contrôle personnalisé",
- "claimProviderNotificationCreateSuccessDescription": "Le contrôle personnalisé nommé « {0} » a été créé",
- "claimProviderNotificationCreateSuccessTitle": "« {0} » créé",
- "claimProviderNotificationCreateTitle": "Création de « {0} »",
- "claimProviderNotificationDeleteDescription": "Suppression du contrôle personnalisé nommé « {0} »",
- "claimProviderNotificationDeleteFailedDescription": "La suppression du contrôle personnalisé « {0} » a échoué. Réessayez ultérieurement.",
- "claimProviderNotificationDeleteFailedTitle": "Impossible de supprimer le contrôle personnalisé",
- "claimProviderNotificationDeleteSuccessDescription": "Le contrôle personnalisé nommé « {0} » a été supprimé",
- "claimProviderNotificationDeleteSuccessTitle": "« {0} » supprimé",
- "claimProviderNotificationDeleteTitle": "Suppression de « {0} »",
- "claimProviderNotificationUpdateDescription": "Mise à jour du contrôle personnalisé nommé « {0} »",
- "claimProviderNotificationUpdateFailedDescription": "La mise à jour du contrôle personnalisé « {0} » a échoué. Réessayez ultérieurement.",
- "claimProviderNotificationUpdateFailedTitle": "Impossible de mettre à jour le contrôle personnalisé",
- "claimProviderNotificationUpdateSuccessDescription": "Le contrôle personnalisé nommé « {0} » a été mis à jour",
- "claimProviderNotificationUpdateSuccessTitle": "« {0} » mis à jour",
- "claimProviderNotificationUpdateTitle": "Mise à jour de « {0} »",
- "claimProviderValidationAppIdInvalid": "La valeur « AppId » n'est pas valide. Vérifiez et réessayez.",
- "claimProviderValidationClientIdMissing": "Il manque une valeur « ClientId » dans les données. Vérifiez et réessayez.",
- "claimProviderValidationControlClaimsRequestedMissing": "Il manque une valeur « ClaimsRequested » dans le contrôle. Vérifiez et réessayez.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "Il manque une valeur « Type » dans l'élément « ClaimsRequested ». Vérifiez et réessayez.",
- "claimProviderValidationControlIdAlreadyExists": "La valeur « Control » « ID » existe déjà. Vérifiez et réessayez.",
- "claimProviderValidationControlIdMissing": "Il manque une valeur « Id » dans le contrôle. Vérifiez et réessayez.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "La valeur « Control » « ID » ne peut pas être supprimée, car elle est référencée dans une stratégie existante. Supprimez-la de la stratégie.",
- "claimProviderValidationControlIdTooManyControls": "La propriété « control » contient trop de contrôles. Vérifiez et réessayez.",
- "claimProviderValidationControlIdValueReserved": "La valeur « Control » « ID » est un mot clé réservé. Utilisez un autre ID.",
- "claimProviderValidationControlNameAlreadyExists": "La valeur « Control » « Name » existe déjà. Vérifiez et réessayez.",
- "claimProviderValidationControlNameMissing": "Il manque une valeur « Name » dans le contrôle. Vérifiez et réessayez.",
- "claimProviderValidationControlsMissing": "Il manque une valeur « Controls » dans les données. Vérifiez et réessayez.",
- "claimProviderValidationDiscoveryUrlMissing": "Il manque une valeur « DiscoveryUrl » dans les données. Vérifiez et réessayez.",
- "claimProviderValidationInvalid": "Les données fournies ne sont pas valides. Vérifiez et réessayez.",
- "claimProviderValidationInvalidJsonDefinition": "Impossible d'enregistrer le contrôle personnalisé. Vérifiez le texte JSON et réessayez.",
- "claimProviderValidationNameAlreadyExists": "La valeur « Name » existe déjà. Vérifiez et réessayez.",
- "claimProviderValidationNameMissing": "Il manque une valeur « Name » dans les données. Vérifiez et réessayez.",
- "claimProviderValidationUnknown": "Une erreur inconnue s'est produite lors de la validation des données fournies. Vérifiez et réessayez.",
- "claimProvidersNone": "Aucun contrôle personnalisé",
- "claimProvidersSearchPlaceholder": "Recherchez des contrôles.",
- "classicPoilcyFilterTitle": "Afficher",
- "classicPolicyAllPlatforms": "Toutes les plateformes",
- "classicPolicyClientAppBrowserAndNative": "Navigateur, applications mobiles et clients de bureau",
- "classicPolicyCloudAppTitle": "Application cloud",
- "classicPolicyControlAllow": "Autoriser",
- "classicPolicyControlBlock": "Bloquer",
- "classicPolicyControlBlockWhenNotAtWork": "Bloquer l'accès quand l'utilisateur n'est pas au travail",
- "classicPolicyControlRequireCompliantDevice": "Exiger un appareil conforme",
- "classicPolicyControlRequireDomainJoinedDevice": "Exiger un appareil joint au domaine",
- "classicPolicyControlRequireMfa": "Exiger une authentification multifacteur",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Exiger une authentification multifacteur lorsqu’il n’est pas au travail",
- "classicPolicyDeleteCommand": "Supprimer",
- "classicPolicyDeleteFailTitle": "Échec de la suppression de la stratégie classique",
- "classicPolicyDeleteInProgressTitle": "Suppression de la stratégie classique",
- "classicPolicyDeleteSuccessTitle": "Stratégie classique supprimée",
- "classicPolicyDetailBladeTitle": "Détails",
- "classicPolicyDisableCommand": "Désactiver",
- "classicPolicyDisableConfirmation": "Êtes-vous sûr de vouloir désactiver « {0} » ? Cette action ne peut pas être annulée.",
- "classicPolicyDisableFailDescription": "Échec de la désactivation de « {0} »",
- "classicPolicyDisableFailTitle": "Échec de la désactivation de la stratégie classique",
- "classicPolicyDisableInProgressDescription": "Désactivation de « {0} »",
- "classicPolicyDisableInProgressTitle": "Désactivation de la stratégie classique",
- "classicPolicyDisableSuccessDescription": "« {0} » désactivée",
- "classicPolicyDisableSuccessTitle": "Stratégie classique désactivée",
- "classicPolicyEasSupportedPlatforms": "Plateformes prises en charge Exchange ActiveSync",
- "classicPolicyEasUnsupportedPlatforms": "Plateformes non prises en charge Exchange ActiveSync",
- "classicPolicyExcludedPlatformsTitle": "Plateformes d'appareils exclues",
- "classicPolicyFilterAll": "Toutes les stratégies",
- "classicPolicyFilterDisabled": "Stratégies désactivées",
- "classicPolicyFilterEnabled": "Stratégies activées",
- "classicPolicyIncludeExcludeMembersDescription": "En excluant des groupes, vous pouvez effectuer une migration progressive de stratégies.",
- "classicPolicyIncludeExcludeMembersTitle": "Inclure/exclure des groupes",
- "classicPolicyIncludedPlatformsTitle": "Plates-formes d'appareils inclus",
- "classicPolicyManualMigrationMessage": "Cette stratégie doit être migrée manuellement.",
- "classicPolicyMigrateCommand": "Migrer",
- "classicPolicyMigrateConfirmation": "Êtes-vous sûr de vouloir migrer « {0} » ? Cette stratégie ne peut être migrée qu’une seule fois.",
- "classicPolicyMigrateFailDescription": "Échec de la migration de « {0} »",
- "classicPolicyMigrateFailTitle": "Échec de la migration de la stratégie classique",
- "classicPolicyMigrateInProgressDescription": "Migration de « {0} » en cours...",
- "classicPolicyMigrateInProgressTitle": "Migration de la stratégie classique",
- "classicPolicyMigrateRecommendText": "Recommandation : migrez vers les nouvelles stratégies du portail Azure.",
- "classicPolicyMigrateSuccessTitle": "Stratégie classique migrée",
- "classicPolicyMigratedSuccessDescription": "Cette stratégie classique peut désormais être gérée sous Stratégies.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "Cette stratégie classique est migrée sous la forme de {0} nouvelles stratégies. Les nouvelles stratégies peuvent être gérés sous Stratégies.",
- "classicPolicyNoEditPermissionMsg": "Vous n'êtes pas autorisé à modifier cette stratégie. Seuls les administrateurs généraux et les administrateurs de la sécurité peuvent modifier la stratégie. Pour plus d'informations, cliquez ici.",
- "classicPolicySaveFailDescription": "Échec de l'enregistrement de « {0} »",
- "classicPolicySaveFailTitle": "Échec de l’enregistrement de la stratégie classique",
- "classicPolicySaveInProgressDescription": "Enregistrement de « {0} »",
- "classicPolicySaveInProgressTitle": "Enregistrement de la stratégie classique",
- "classicPolicySaveSuccessDescription": "« {0} » enregistrée",
- "classicPolicySaveSuccessTitle": "Stratégie classique enregistrée",
- "clientAppBladeLegacyInfoBanner": "L'authentification héritée n'est pas prise en charge actuellement.",
- "clientAppBladeLegacyUpsellBanner": "Bloquer les applications clientes non prises en charge (préversion)",
- "clientAppBladeTitle": "Applications clientes",
- "clientAppDescription": "Sélectionner les applications clientes auxquelles cette stratégie s'applique",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync ne prend pas actuellement en charge toutes les autres conditions.",
- "clientAppLearnMore": "Contrôlez l’accès utilisateur à des applications clientes spécifiques cibles qui n’utilisent pas l’authentification moderne.",
- "clientAppLegacyHeader": "Clients d’authentification hérités",
- "clientAppMobileDesktop": "Applications mobiles et clients de bureau",
- "clientAppModernHeader": "Clients d'authentification modernes",
- "clientAppOnlySupportedPlatforms": "Appliquer la stratégie uniquement aux plateformes prises en charge",
- "clientAppSelectSpecificClientApps": "Sélectionner des applications clientes",
- "clientAppWebBrowser": "Navigateur",
- "clientAppsSelectedLabel": "{0} inclus",
- "clientTypeBrowser": "Navigateur",
- "clientTypeEas": "Clients Exchange ActiveSync",
- "clientTypeEasInfo": "Clients Exchange ActiveSync qui utilisent uniquement l’authentification héritée.",
- "clientTypeModernAuth": "Clients d'authentification moderne",
- "clientTypeOtherClients": "Autres clients",
- "clientTypeOtherClientsInfo": "Cela inclut les anciens clients Office et autres protocoles de messagerie (POP, IMAP, SMTP, etc.). [En savoir plus][1]\n[1] : https://aka.ms/caclientapps\n ",
- "cloudAppCountDiffBannerText": "{0} applications cloud configurées dans cette stratégie ont été supprimées de l'annuaire, mais cela n'affecte pas les autres applications dans la stratégie. La prochaine fois que vous mettrez à jour la section Application de la stratégie, les applications supprimées seront supprimées automatiquement de celle-ci.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Toutes les applications Microsoft",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Autoriser les applications mobiles, de bureau et cloud Microsoft (préversion)",
- "cloudappsSelectionBladeAllCloudapps": "Toutes les applications cloud",
- "cloudappsSelectionBladeExcludeDescription": "Sélectionner les applications cloud à exclure de la stratégie",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Sélectionner les applications cloud exclues",
- "cloudappsSelectionBladeIncludeDescription": "Sélectionner les applications cloud auxquelles cette stratégie s'applique",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Sélectionner",
- "cloudappsSelectionBladeSelectedCloudapps": "Sélectionner les applications",
- "cloudappsSelectorInfoBallonText": "Services auxquels l'utilisateur accède pour son travail. Par exemple « Salesforce »",
- "cloudappsSelectorPluralExcluded": "{0} applications exclues",
- "cloudappsSelectorPluralIncluded": "{0} applications incluses",
- "cloudappsSelectorSingularExcluded": "1 application exclue",
- "cloudappsSelectorSingularIncluded": "1 application incluse",
- "cloudappsSelectorUserPlural": "{0} applications",
- "cloudappsSelectorUserSingular": "1 application",
- "conditionLabelMulti": "{0} conditions sélectionnées",
- "conditionLabelOne": "1 condition sélectionnée",
- "conditionalAccessBladeTitle": "Accès conditionnel",
- "conditionsNotSelectedLabel": "Non configuré",
- "conditionsReqMfaReauthSet": "Certaines options ne sont pas disponibles en raison de l’octroi « Exiger l’authentification multifacteur » et du contrôle de session « Fréquence de connexion à chaque fois » actuellement sélectionnés",
- "conditionsReqPwSet": "Certaines options ne sont pas disponibles en raison de l’autorisation « Exiger une modification du mot de passe » en cours de sélection",
- "configureCasText": "Configurer Cloud App Security",
- "configureCustomControlsText": "Configurer une stratégie personnalisée",
- "controlLabelMulti": "{0} contrôles sélectionnés",
- "controlLabelOne": "1 contrôle sélectionné",
- "controlValidatorText": "Sélectionnez au moins un contrôle.",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "En savoir plus sur l’obligation d’appareils conformes.",
- "controlsDeviceComplianceInfoBubble": "L'appareil doit être compatible avec Intune. Si ce n'est pas le cas, l'utilisateur est invité à le rendre conforme.",
- "controlsDomainJoinedAriaLabel": "En savoir plus sur la nécessité d’utiliser des appareils avec jointure Microsoft Entra hybride.",
- "controlsDomainJoinedInfoBubble": "Les appareils doivent disposer d’une jointure Microsoft Entra hybride.",
- "controlsMamAriaLabel": "En savoir plus sur l’exigence d’applications clientes approuvées.",
- "controlsMamInfoBubble": "L'appareil doit utiliser ces applications clientes approuvées.",
- "controlsMfaInfoBubble": "L'utilisateur doit répondre à des exigences de sécurité supplémentaires, telles qu'un appel téléphonique ou un SMS",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "En savoir plus sur la nécessité d’applications protégées par une stratégie.",
- "controlsRequireCompliantAppInfoBubble": "L’appareil doit utiliser des applications protégées par une stratégie.",
- "controlsRequirePasswordResetAriaLabel": "En savoir plus sur l’obligation de modifier le mot de passe.",
- "controlsRequirePasswordResetInfoBubble": "Exiger la modification du mot de passe pour réduire le risque utilisateur. Cette option nécessite également une authentification multifacteur. Les autres contrôles ne peuvent pas être utilisés.",
- "countriesRadiobuttonInfoBalloonContent": "Le pays ou la région d'où provient la connexion est déterminé par l'adresse IP de l'utilisateur.",
- "createNewVpnCert": "Nouveau certificat",
- "createdTimeLabel": "Heure de création",
- "customRoleLabel": "Rôles personnalisés (non pris en charge)",
- "dateRangeTypeLabel": "Plage de dates",
- "daysOfWeekPlaceholderText": "Filtrer les jours de la semaine",
- "daysOfWeekTypeLabel": "Jours de la semaine",
- "deletePolicyNoLicenseText": "Vous pouvez supprimer cette stratégie maintenant. Une fois supprimée, vous ne pourrez pas la recréer avant d'avoir les licences requises.",
- "descriptionContentForControlsAndOr": "Pour plusieurs contrôles",
- "devicePlatform": "Plateforme de l'appareil",
- "devicePlatformConditionHelpDescription": "Appliquez la stratégie aux plateformes d’appareils sélectionnées.\n[En savoir plus][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} inclus",
- "devicePlatformIncludeExclude": "{0} et {1} exclus",
- "devicePlatformNoSelectionError": "Les plateformes d’appareils sélectionnées nécessitent la sélection d’un sous-élément.",
- "devicePlatformsNone": "Aucun",
- "deviceSelectionBladeExcludeDescription": "Sélectionner les plateformes à exclure de la stratégie",
- "deviceSelectionBladeIncludeDescription": "Sélectionner les plateformes d'appareil à inclure dans cette stratégie",
- "deviceStateAll": "Tous les états d'appareils",
- "deviceStateCompliant": "Appareil marqué comme conforme",
- "deviceStateCompliantInfoContent": "Les appareils compatibles avec Intune sont exclus de l'évaluation de cette stratégie. Ainsi, par exemple, si la stratégie bloque l'accès, elle bloque tous les appareils à l'exception des appareils compatibles avec Intune.",
- "deviceStateConditionConfigureInfoContent": "Configurer la stratégie en fonction de l'état de l'appareil",
- "deviceStateConditionSelectorInfoContent": "Si l’appareil à partir duquel l’utilisateur se connecte dispose d’une « jointure Microsoft Entra hybride » ou est « marqué comme conforme ».\n Cela a été déconseillé. Utilisez « {1} » à la place.",
- "deviceStateConditionSelectorLabel": "État de l’appareil (déconseillé)",
- "deviceStateDomainJoined": "Appareil avec jointure Microsoft Entra hybride",
- "deviceStateDomainJoinedInfoContent": "Les appareils avec jointure Microsoft Entra hybride sont exclus de l'évaluation de cette stratégie. Ainsi, par exemple, si la stratégie bloque l'accès à cette dernière, elle bloque tous les appareils, à l'exception des appareils avec jointure Microsoft Entra hybride.",
- "deviceStateDomainJoinedInfoLinkText": "En savoir plus.",
- "deviceStateExcludeDescription": "Sélectionnez la condition d'état d'appareil utilisée pour exclure des appareils de la stratégie.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} et exclusion de {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} et exclusion de {1}, {2}",
- "directoryRoleInfoContent": "Attribuez une stratégie à des rôles d’annuaire intégrés.",
- "directoryRolesLabel": "Rôles d'annuaire",
- "discardbutton": "Ignorer",
- "downloadDefaultFileName": "Plages d'adresses IP",
- "downloadExampleFileName": "Exemple",
- "downloadExampleHeader": "Il s'agit d'un exemple de fichier avec des démonstrations relatives aux types de données qui peuvent être acceptés. Les lignes commençant par # sont ignorées.",
- "duplicate": "Dupliquer",
- "duplicatePolicyName": "{0} COPIE",
- "endDatePickerLabel": "Terminaisons",
- "endTimePickerLabel": "Heure de fin",
- "enterCountryText": "L'adresse IP et le pays ou la région sont évalués dans une paire. Sélectionnez le pays.",
- "enterIpText": "Le pays ou la région et l'adresse IP sont évalués dans une paire. Entrez l'adresse IP.",
- "enterUserText": "Aucun utilisateur n'est sélectionné. Sélectionnez-en un.",
- "evaluationResult": "Résultat de l'évaluation",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync avec plateformes prises en charge uniquement",
- "excludeAllTrustedLocationSelectorText": "tous les emplacements approuvés",
- "featureRequiresP2": "Cette fonctionnalité nécessite une licence Microsoft Entra ID P2.",
- "friday": "Vendredi",
- "grantControls": "Contrôles d'octroi",
- "gridNetworkTrusted": "Approuvé",
- "gridPolicyCreatedDateTime": "Date de création",
- "gridPolicyEnabled": "Activé",
- "gridPolicyModifiedDateTime": "Date de modification",
- "gridPolicyName": "Nom de la stratégie",
- "gridPolicyState": "État",
- "groupSelectionBladeExcludeDescription": "Sélectionner les groupes à exclure de la stratégie",
- "groupSelectionBladeExcludedSelectorTitle": "Sélectionner les groupes exclus",
- "groupSelectionBladeSelect": "Sélectionner des groupes",
- "groupSelectorInfoBallonText": "Groupes du répertoire auquel la stratégie s'applique. Par exemple « groupe pilote »",
- "groupsSelectionBladeTitle": "Groupes",
- "helpCommonScenariosText": "Vous êtes intéressé par les scénarios courants ?",
- "helpCondition1": "Quand un utilisateur est en dehors du réseau de société",
- "helpCondition2": "Quand des utilisateurs du groupe 'Responsables' se connectent",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "Ils doivent se connecter avec l’authentification multifacteur",
- "helpControl2": "Ils doivent être sur un appareil Intune ou joint au domaine",
- "helpControlsTitle": "Contrôle ",
- "helpIntroText": "L’accès conditionnel vous donne la possibilité d’appliquer des exigences d’accès quand des conditions spécifiques se produisent. Examinons quelques exemples",
- "helpIntroTitle": "Qu'est-ce que l'accès conditionnel ?",
- "helpLearnMoreText": "Vous voulez en savoir plus sur l'accès conditionnel ?",
- "helpStartStep1": "Créer votre première stratégie en cliquant sur « + Nouvelle stratégie »",
- "helpStartStep2": "Spécifier les conditions et contrôles de la stratégie",
- "helpStartStep3": "Quand vous avez terminé, n'oubliez pas d'activer la stratégie et de la créer",
- "helpStartTitle": "Démarrer",
- "highRisk": "Haute",
- "includeAndExcludeAppsTextFormat": "Inclure : {0}. Exclure : {1}.",
- "includeAppsTextFormat": "Inclure : {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Les zones inconnues sont des adresses IP qui ne peuvent pas être mappées à un pays ou une région.",
- "includeUnknownAreasCheckboxLabel": "Inclure les zones inconnues",
- "infoCommandLabel": "Informations",
- "invalidCertDuration": "Durée de certificat non valide",
- "invalidIpAddress": "La valeur doit être une adresse IP valide",
- "invalidReAuthSignInRiskOptionSelected": "Le contrôle de session « Fréquence de connexion à chaque fois » n’autorise pas la sélection « aucun risque » dans le contrôle de condition « niveau de risque de connexion ».",
- "invalidUriErrorMsg": "Entrez un URI valide. Par exemple uri:contoso.com:acr",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Charger tout",
- "loading": "Chargement...",
- "locationConfigureNamedLocationsText": "Configurer tous les emplacements approuvés",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Le nom de l'emplacement est trop long. Il doit comprendre 256 caractères maximum",
- "locationSelectionBladeExcludeDescription": "Sélectionner les emplacements à exclure de la stratégie",
- "locationSelectionBladeIncludeDescription": "Sélectionnez les emplacements à inclure dans cette stratégie",
- "locationsAllLocationsLabel": "Tous les emplacements",
- "locationsAllNamedLocationsLabel": "Toutes les adresses IP approuvées",
- "locationsAllPrivateLinksLabel": "Tous les liens privés dans mon locataire",
- "locationsIncludeExcludeLabel": "{0} et exclure toutes les adresses IP approuvées",
- "locationsSelectedPrivateLinksLabel": "Liaisons privées sélectionnées",
- "lowRisk": "Bas",
- "macOsDisplayName": "Mac OS",
- "managePoliciesLicenseText": "Pour gérer les stratégies d'accès conditionnel, votre organisation doit avoir Microsoft Entra ID P1 ou P2.",
- "manageSecurityDefaultsAriaLabel": "Gérez les paramètres de sécurité par défaut.",
- "markAsTrustedCheckboxInfoBalloonContent": "La connexion à partir d'un emplacement approuvé réduit le risque de connexion d'un utilisateur. Marquez uniquement cet emplacement comme approuvé si vous savez que les plages d'adresses IP entrées sont établies et crédibles dans votre organisation.",
- "markAsTrustedCheckboxLabel": "Marquer comme emplacement approuvé",
- "mediumRisk": "Moyen",
- "memberSelectionCommandRemove": "Supprimer",
- "menuItemClaimProviderControls": "Contrôles personnalisés (préversion)",
- "menuItemClassicPolicies": "Stratégies classiques",
- "menuItemInsightsAndReporting": "Insights et rapports",
- "menuItemManage": "Gérer",
- "menuItemNamedLocationsPreview": "Emplacements nommés (préversion)",
- "menuItemNamedNetworks": "Emplacements nommés",
- "menuItemPolicies": "Stratégies",
- "menuItemTermsOfUse": "Conditions d'utilisation",
- "modifiedTimeLabel": "Heure de modification",
- "monday": "Lundi",
- "nameLabel": "Nom",
- "namedLocationCountryInfoBanner": "Seules les adresses IPv4 sont mappées à des pays/régions. Les adresses IPv6 sont incluses dans des pays/régions inconnu(e)s.",
- "namedLocationTypeCountry": "Pays ou régions",
- "namedLocationTypeLabel": "Définir l'emplacement à l'aide de :",
- "namedLocationUpsellBanner": "Cette vue est déconseillée. Accédez à la nouvelle vue améliorée vue « Emplacements nommés ».",
- "namedLocationsHelpDescription": "Les emplacements nommés sont utilisés par les rapports de sécurité Microsoft Entra ID afin de réduire les faux positifs et par les stratégies d'accès conditionnel Microsoft Entra.\n[En savoir plus][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Ajouter une nouvelle plage IP (ex : 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "Vous devez sélectionner au moins un pays ou une région",
- "namedNetworkDeleteCommand": "Supprimer",
- "namedNetworkDeleteDescription": "Êtes-vous sûr de vouloir supprimer « {0} » ? Cette action ne peut pas être annulée.",
- "namedNetworkDeleteTitle": "Êtes-vous sûr ?",
- "namedNetworkDownloadIpRange": "Télécharger",
- "namedNetworkInvalidRange": "La valeur doit être une plage d'adresses IP valide.",
- "namedNetworkIpRangeNeeded": "Vous devez avoir au moins une plage d'adresses IP valide.",
- "namedNetworkIpRangesDescriptionContent": "Configurer les plages d'adresses IP de votre organisation",
- "namedNetworkIpRangesTab": "Plages d'adresses IP",
- "namedNetworkListAdd": "Nouvel emplacement",
- "namedNetworkListConfigureTrustedIps": "Configurer des adresses IP approuvées pour l’authentification multifacteur",
- "namedNetworkNameDescription": "Exemple : « Bureau de Paris »",
- "namedNetworkNameInvalid": "Le nom fourni n'est pas valide.",
- "namedNetworkNameRequired": "Vous devez fournir un nom pour cet emplacement.",
- "namedNetworkNoIpRanges": "Aucune plage d'adresses IP",
- "namedNetworkNotificationCreateDescription": "Création de l'emplacement nommé « {0} »",
- "namedNetworkNotificationCreateFailedDescription": "La création de l'emplacement « {0} » a échoué. Réessayez plus tard.",
- "namedNetworkNotificationCreateFailedTitle": "Impossible de créer l'emplacement",
- "namedNetworkNotificationCreateSuccessDescription": "Emplacement nommé « {0} » créé",
- "namedNetworkNotificationCreateSuccessTitle": "« {0} » créé",
- "namedNetworkNotificationCreateTitle": "Création de « {0} »",
- "namedNetworkNotificationDeleteDescription": "Suppression de l'emplacement nommé « {0} »",
- "namedNetworkNotificationDeleteFailedDescription": "La suppression de l'emplacement « {0} » a échoué. Réessayez plus tard.",
- "namedNetworkNotificationDeleteFailedTitle": "Impossible de supprimer l'emplacement",
- "namedNetworkNotificationDeleteSuccessDescription": "Emplacement nommé « {0} » supprimé",
- "namedNetworkNotificationDeleteSuccessTitle": "« {0} » supprimé",
- "namedNetworkNotificationDeleteTitle": "Suppression de « {0} »",
- "namedNetworkNotificationUpdateDescription": "Mise à jour de l'emplacement nommé « {0} »",
- "namedNetworkNotificationUpdateFailedDescription": "La mise à jour de l'emplacement « {0} » a échoué. Réessayez plus tard.",
- "namedNetworkNotificationUpdateFailedTitle": "Impossible de mettre à jour l'emplacement",
- "namedNetworkNotificationUpdateSuccessDescription": "Emplacement nommé « {0} » mis à jour",
- "namedNetworkNotificationUpdateSuccessTitle": "« {0} » mis à jour",
- "namedNetworkNotificationUpdateTitle": "Mise à jour de « {0} »",
- "namedNetworkSearchPlaceholder": "Recherchez des emplacements.",
- "namedNetworkUploadFailedDescription": "Une erreur s'est produite lors de l'analyse du fichier fourni. Veillez à charger un fichier en texte brut avec chaque ligne au format CIDR.",
- "namedNetworkUploadFailedTitle": "Échec de l'analyse de '{0}'",
- "namedNetworkUploadInProgressDescription": "Tentative d'analyse des valeurs CIDR valides à partir de « {0} ».",
- "namedNetworkUploadInProgressTitle": "Analyse de « {0} »",
- "namedNetworkUploadInvalidDescription": "« {0} » est trop volumineux ou son format n'est pas valide.",
- "namedNetworkUploadInvalidTitle": "« {0} » non valide",
- "namedNetworkUploadIpRange": "Charger",
- "namedNetworkUploadSuccessDescription": "{0} lignes analysées. {1} lignes au format incorrect. {2} ignorées.",
- "namedNetworkUploadSuccessTitle": "Fin de l'analyse de « {0} »",
- "namedNetworksAdd": "Nouvel emplacement nommé",
- "namedNetworksConditionHelpDescription": "Contrôlez l'accès des utilisateurs en fonction de leur emplacement physique.\n[En savoir plus][1]\n[1] : http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} et {1} exclus",
- "namedNetworksHelpDescription": "Les emplacements nommés sont utilisés par les rapports de sécurité Microsoft Entra ID afin de réduire les faux positifs et par les stratégies d'accès conditionnel Microsoft Entra.\n[En savoir plus][1]\n[1] : https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} inclus",
- "namedNetworksNone": "Aucun emplacement nommé trouvé.",
- "namedNetworksTitle": "Configurer les emplacements",
- "namednetworkExceedingSizeErrorBladeTitle": "Détails de l'erreur",
- "namednetworkExceedingSizeErrorDetailText": "Cliquez ici pour plus de détails.",
- "namednetworkExceedingSizeErrorMessage": "Vous avez dépassé la quantité de stockage maximale autorisée pour les emplacements nommés. Réessayez avec une liste plus courte. Cliquez ici pour afficher plus de détails.",
- "needMfaSecondary": "« Exiger l’authentification multifacteur » doit être sélectionné lorsque « Fréquence de connexion à chaque fois » est sélectionné avec « Méthodes d’authentification secondaires uniquement »",
- "needMfaSpecificApps": "Le contrôle de session « Fréquence de connexion à chaque fois » nécessite le contrôle d’octroi « Exiger une authentification multifacteur » lorsque des applications prises en charge spécifiquement sont sélectionnées",
- "newCertName": "Nouveau certificat",
- "noAttributePermissionsError": "Privilèges insuffisants pour créer ou mettre à jour la stratégie. Le rôle de lecteur de définition d’attribut est obligatoire pour ajouter/modifier des filtres dynamiques.",
- "noPolicyRowMessage": "Aucune stratégie",
- "noSPSelected": "Aucun principal du service sélectionné",
- "noUpdatePermissionMessage": "Vous n'êtes pas autorisé à mettre à jour ces paramètres. Veuillez contacter votre administrateur général pour obtenir l'accès.",
- "noUserSelected": "Aucun utilisateur sélectionné",
- "noneRisk": "Aucun risque",
- "office365Description": "Ces applications incluent Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer et d'autres.",
- "office365InfoBox": "Au moins l'une des applications sélectionnées fait partie d'Office 365. Nous vous recommandons de définir la stratégie sur l'application Office 365 à la place.",
- "oneUserSelected": "1 utilisateur sélectionné",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Seuls les administrateurs généraux peuvent enregistrer cette stratégie.",
- "or": "{0} OU {1}",
- "pickerDoneCommand": "Terminé",
- "policiesBladeAdPremiumUpsellBannerText": "Créez vos propres stratégies et ciblez des conditions spécifiques telles que les applications cloud, les connexions à risque et les plateformes d’appareils avec Microsoft Entra ID Premium.",
- "policiesBladeTitle": "Stratégies",
- "policiesBladeTitleWithAppName": "Stratégies : {0}",
- "policiesDisabledBannerText": "La création et la modification des stratégies sont interdites pour les applications avec un attribut d'authentification lié.",
- "policiesHitMaxLimitStatusBarMessage": "Vous avez atteint le nombre maximal de stratégies pour ce locataire. Supprimez des stratégies avant d'en créer d'autres.",
- "policyAssignmentsSection": "Affectations",
- "policyBlockAllInfoBox": "La stratégie configurée bloque tous les utilisateurs. Elle n’est donc pas prise en charge. Passez en revue les affectations et les contrôles. Excluez l’utilisateur actuel {0}, si vous souhaitez enregistrer cette stratégie.",
- "policyCloudAppsDisplayTextAllApp": "Toutes les applications",
- "policyCloudAppsLabel": "Applications cloud",
- "policyConditionClientAppDescription": "Logiciel dont l'utilisateur se sert pour accéder à l'application cloud. Par exemple « Navigateur »",
- "policyConditionClientAppV2Description": "Logiciel dont l'utilisateur se sert pour accéder à l'application cloud. Par exemple « Navigateur »",
- "policyConditionDevicePlatform": "Plateformes d’appareils",
- "policyConditionDevicePlatformDescription": "Plateforme sur laquelle l'utilisateur se connecte. Par exemple iOS",
- "policyConditionLocation": "Emplacements",
- "policyConditionLocationDescription": "Emplacement (déterminé à l'aide de la plage d'adresses IP) à partir duquel l'utilisateur se connecte",
- "policyConditionLocationPreview": "Emplacements (préversion)",
- "policyConditionSigninRisk": "Risque de connexion",
- "policyConditionSigninRiskDescription": "Probabilité que la connexion provienne d'une autre personne que l'utilisateur. Le niveau de risque peut être élevé, moyen ou faible. Nécessite une licence Microsoft Entra ID P2.",
- "policyConditionUserRisk": "Risque de l’utilisateur",
- "policyConditionUserRiskDescription": "Configurez les niveaux de risque utilisateur nécessaires à l’application de la stratégie",
- "policyConditioniClientApp": "Applications clientes",
- "policyControlAllowAccessDisplayedName": "Accorder l'accès",
- "policyControlAuthenticationStrengthDisplayedName": "Exiger la force de l’authentification (préversion)",
- "policyControlBladeTitle": "Octroyer",
- "policyControlBlockAccessDisplayedName": "Bloquer l'accès",
- "policyControlCompliantDeviceDisplayedName": "Exiger que l'appareil soit marqué comme conforme",
- "policyControlContentDescription": "Contrôlez l’application de l’accès pour bloquer ou accorder l’accès.",
- "policyControlInfoBallonText": "Bloquer l'accès ou sélectionner des exigences supplémentaires à satisfaire avant d'autoriser l'accès",
- "policyControlMfaChallengeDisplayedName": "Exiger une authentification multifacteur",
- "policyControlRequireCompliantAppDisplayedName": "Exiger une stratégie de protection des applications",
- "policyControlRequireDomainJoinedDisplayedName": "Exiger un appareil avec jointure Microsoft Entra hybride",
- "policyControlRequireMamDisplayedName": "Demander une application cliente approuvée",
- "policyControlRequiredPasswordChangeDisplayedName": "Nécessite une modification du mot de passe",
- "policyControlSelectAuthStrength": "Exiger la force de l’authentification",
- "policyControlsNoControlsSelected": "0 contrôles sélectionnés",
- "policyControlsSection": "Contrôles d'accès",
- "policyCreatBladeTitle": "Nouveau",
- "policyCreateButton": "Créer",
- "policyCreateFailedMessage": "Erreur : {0}",
- "policyCreateFailedTitle": "Échec de la création de « {0} »",
- "policyCreateInProgressTitle": "Création de « {0} »",
- "policyCreateSuccessMessage": "« {0} » créée. La stratégie sera activée dans quelques minutes si vous avez défini « Activer la stratégie » sur « Activé ».",
- "policyCreateSuccessTitle": "« {0} » créée",
- "policyDeleteConfirmation": "Êtes-vous sûr de vouloir supprimer « {0} » ? Cette action ne peut pas être annulée.",
- "policyDeleteFailTitle": "Échec de la suppression de « {0} »",
- "policyDeleteInProgressTitle": "Suppression de « {0} »",
- "policyDeleteSuccessTitle": "« {0} » correctement supprimé",
- "policyEnforceLabel": "Activer une stratégie",
- "policyErrorCannotSetSigninRisk": "Vous n’êtes pas autorisé à enregistrer une stratégie avec une condition de risque de connexion.",
- "policyErrorNoPermission": "Vous n'avez pas l'autorisation d'enregistrer la stratégie. Contactez votre administrateur général.",
- "policyErrorUnknown": "Une erreur s'est produite. Réessayez plus tard.",
- "policyFallbackWarningMessage": "Échec de la création ou de la mise à jour de « {0} » avec MS Graph, ce qui se traduit par un repli sur AD Graph. Examinez le scénario suivant, car il existe probablement un bogue lors de l’appel du point de terminaison de stratégie pour MS Graph avec une condition incompatible.",
- "policyFallbackWarningTitle": "Création ou mise à jour de « {0} » partiellement réussie",
- "policyNameCannotBeEmpty": "Le nom de stratégie ne peut pas être vide.",
- "policyNameDevice": "Stratégie de l'appareil",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Stratégie de gestion des applications mobiles",
- "policyNameMfaLocation": "Authentification multifacteur et stratégie d’emplacement",
- "policyNamePlaceholderText": "Exemple : « stratégie d'application de conformité d'appareil »",
- "policyNameTooLongError": "Le nom de la stratégie est trop long. 256 caractères maximum",
- "policyOff": "Désactivé",
- "policyOn": "Activé",
- "policyReportOnly": "Rapport uniquement",
- "policyReviewSection": "Vérifier",
- "policySaveButton": "Enregistrer",
- "policyStatusIconDescription": "La stratégie est activée",
- "policyStatusIconEnabled": "Icône d'état activée",
- "policyTemplateName1": "Utilisez les restrictions appliquées par l'application pour l'accès au navigateur {0}",
- "policyTemplateName2": "Autoriser l'accès à {0} seulement sur les appareils managés",
- "policyTemplateName3": "Stratégie migrée à partir des paramètres d’évaluation de l’accès continu",
- "policyTriggerRiskSpecific": "Sélectionner un niveau de risque spécifique",
- "policyTriggersInfoBalloonText": "Conditions qui définissent à quel moment la stratégie s'applique. Par exemple « emplacement »",
- "policyTriggersNoConditionsSelected": "0 conditions sélectionnées",
- "policyTriggersSelectorLabel": "Conditions",
- "policyUpdateFailedMessage": "Erreur : {0}",
- "policyUpdateFailedTitle": "Échec de la mise à jour de {0}",
- "policyUpdateInProgressTitle": "Mise à jour de {0}",
- "policyUpdateSuccessMessage": "{0} correctement mise à jour. La stratégie sera activée dans quelques minutes si vous avez défini « Activer la stratégie » sur « Activé ».",
- "policyUpdateSuccessTitle": "{0} mis à jour avec succès",
- "primaryCol": "Principal",
- "privateLinkLabel": "Liaison privée Microsoft Entra ID",
- "reportOnlyInfoBox": "Mode rapport uniquement : les stratégies sont évaluées et consignées lors de la connexion, mais n’ont pas d’impact sur les utilisateurs.",
- "requireAllControlsText": "Demander tous les contrôles sélectionnés",
- "requireCompliantDevice": "Exiger un appareil conforme",
- "requireDomainJoined": "Exiger un appareil joint au domaine",
- "requireGrantReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert un contrôle d’octroi « exiger une authentification multifacteur » ou « exiger une modification du mot de passe » lorsque « Toutes les applications cloud » sont sélectionnées",
- "requireMFA": "Exiger une authentification multifacteur",
- "requireMfaReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert le contrôle d’octroi « exiger l’authentification multifacteur » pour « risque de connexion »",
- "requireOneControlText": "Demander un des contrôles sélectionnés",
- "requirePasswordChangeReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » nécessite le contrôle d’octroi « exiger une modification du mot de passe » pour « risque utilisateur »",
- "requireRiskReauth": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert le contrôle de session « Risque utilisateur » ou « Risque de connexion » lorsque « toutes les applications cloud » sont sélectionnées.",
- "requireRiskReauthRiskNotEnabled": "Le contrôle de session « Fréquence de connexion à chaque fois » n’est pas disponible lorsque « toutes les applications cloud » sont sélectionnées.",
- "requireRiskReauthSignInOnly": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert le contrôle de session « Risque de connexion » lorsque « toutes les applications cloud » sont sélectionnées.",
- "requireRiskReauthUserOnly": "Le contrôle de session « Fréquence de connexion à chaque fois » requiert le contrôle de session « Risque utilisateur » lorsque « toutes les applications cloud » sont sélectionnées.",
- "resetFilters": "Réinitialiser les filtres",
- "sPRequired": "Le principal du service est obligatoire",
- "sPSelectorInfoBalloon": "Utilisateur ou principal du service que vous souhaitez tester",
- "saturday": "Samedi",
- "searchTextTooLongError": "Le texte de la recherche est trop long. Maximum 256 caractères",
- "securityDefaultsPolicyName": "Paramètres de sécurité par défaut",
- "securityDefaultsTextMessage": "Les paramètres de sécurité par défaut doivent être désactivés pour activer la stratégie d’accès conditionnel.",
- "securityDefaultsUpdateInProgressText": "Une mise à jour des paramètres de sécurité par défaut est en cours. Veuillez patienter quelques instants et réessayer.",
- "securityDefaultsWarningMessage": "Il semble que vous êtes sur le point de gérer les configurations de sécurité de votre organisation. Excellent ! Vous devez d’abord {0}désactiver les paramètres de sécurité par défaut{1} avant d’activer une stratégie d’accès conditionnel.",
- "selectDevicePlatforms": "Sélectionner des plateformes d'appareil",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Sélectionner les emplacements",
- "selectedSP": "Principal du service sélectionné",
- "servicePrincipalBladeExcludedSelectorTitle": "Sélectionner les principaux de service exclus",
- "servicePrincipalBladeIncludedSelectorTitle": "Sélectionner des principaux de service",
- "servicePrincipalDataGridAria": "Liste des principaux du service disponibles",
- "servicePrincipalDropDownLabel": "À quoi cette stratégie s’applique-t-elle ?",
- "servicePrincipalInfoBox": "Certaines conditions ne sont pas disponibles en raison de la sélection de « {0} » dans l’affectation de la stratégie",
- "servicePrincipalRadioAll": "Tous les principaux du service détenus",
- "servicePrincipalRadioSelect": "Sélectionner des principaux du service",
- "servicePrincipalSelectionsAria": "Grille des principaux du service sélectionnés",
- "servicePrincipalSelectorAria": "Liste des principaux du service choisis",
- "servicePrincipalSelectorMultiple": "{0} principaux du service sélectionnés",
- "servicePrincipalSelectorSingle": "1 principal du service sélectionné",
- "servicePrincipalSpecificExc": "Principaux de service spécifiques exclus",
- "servicePrincipalSpecificInc": "Principaux du service spécifiques inclus",
- "servicePrincipals": "Principaux du service",
- "sessionControlBladeTitle": "Session",
- "sessionControlDescriptionContent": "Contrôlez l’accès en fonction des contrôles de session pour activer des expériences limitées au sein d’applications cloud spécifiques.",
- "sessionControlDisableInfo": "Ce contrôle fonctionne uniquement avec les applications prises en charge. Office 365, Exchange Online et SharePoint Online sont actuellement les seules applications cloud qui prennent en charge les restrictions appliquées par l’application. Cliquez ici pour en savoir plus.",
- "sessionControlInfoBallonText": "Les contrôles de session permettent une expérience limitée au sein d'une application cloud.",
- "sessionControls": "Contrôles de session",
- "sessionControlsAppEnforcedLabel": "Utiliser les restrictions appliquées par l'application",
- "sessionControlsCasLabel": "Utiliser le contrôle d'application par accès conditionnel",
- "sessionControlsSecureSignInLabel": "Exiger une liaison de jeton",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} inclus",
- "signinRiskReauth": "La condition « Risque de connexion » doit être sélectionnée lorsque le contrôle de session « Exiger l’authentification multifacteur » et la « fréquence de connexion à chaque fois » sont sélectionnés",
- "signinRiskTriggerDescriptionContent": "Sélectionner le niveau de risque de connexion",
- "singleTenantServicePrincipalInfoBallonText": "La stratégie s’applique uniquement aux principaux de service à locataire unique appartenant à votre organisation. Cliquez ici pour en savoir plus ",
- "specificSigninRiskLevelsOption": "Sélectionner des niveaux de risque de connexion spécifiques",
- "specificUsersExcluded": "utilisateurs spécifiques exclus",
- "specificUsersIncluded": "Utilisateurs spécifiques inclus",
- "specificUsersIncludedAndExcluded": "Utilisateurs spécifiques exclus et inclus",
- "startDatePickerLabel": "Démarrages",
- "startFreeTrial": "Démarrer un essai gratuit",
- "startTimePickerLabel": "Heure de début",
- "sunday": "Dimanche",
- "testButton": "What If",
- "thumbprintCol": "Empreinte numérique",
- "thursday": "Jeudi",
- "timeConditionAllTimesLabel": "À tout moment",
- "timeConditionIntroText": "Configurer l'heure à laquelle cette stratégie s'applique",
- "timeConditionSelectorInfoBallonContent": "Quand l'utilisateur se connecte. Par exemple, le « mercredi de 9 h à 17 h »",
- "timeConditionSelectorLabel": "Heure (préversion)",
- "timeConditionSpecificLabel": "Heures spécifiques",
- "timeSelectorAllTimesText": "À tout moment",
- "timeSelectorSpecificTimesText": "Heures spécifiques configurées",
- "timeZoneDropdownInfoBalloonContent": "Sélectionnez un fuseau horaire qui définit l'intervalle de temps. Cette stratégie s'applique aux utilisateurs de tous les fuseaux horaires. Par exemple, le « mercredi de 9 h à 17 h » pour un utilisateur correspond au « mercredi de 10 h à 18 h » pour un utilisateur d'un autre fuseau horaire.",
- "timeZoneDropdownLabel": "Fuseau horaire",
- "timeZoneDropdownPlaceholderText": "Sélectionner un fuseau horaire",
- "tooManyPoliciesDescription": "Seules les 50 premières stratégies sont affichées. Cliquez ici pour afficher toutes les stratégies.",
- "tooManyPoliciesTitle": "Plus de 50 stratégies trouvées",
- "trustedLocationStatusIconDescription": "L'emplacement est approuvé",
- "trustedLocationStatusIconEnabled": "Icône d'état Approuvé",
- "tuesday": "Mardi",
- "uploadInBadState": "Impossible de charger le fichier spécifié.",
- "upsellAppsDescription": "Exiger l’authentification multifacteur pour les applications sensibles en permanence ou uniquement en dehors du réseau de l’entreprise.",
- "upsellAppsTitle": "Sécuriser les applications",
- "upsellBannerText": "Obtenir une version d’évaluation Premium gratuite pour utiliser cette fonctionnalité",
- "upsellDataDescription": "Exigez que l'appareil soit marqué comme conforme ou avec jointure Microsoft Entra hybride pour autoriser l'accès aux ressources de l'entreprise.",
- "upsellDataTitle": "Sécuriser les données",
- "upsellDescription": "L’accès conditionnel fournit le contrôle et la protection dont vous avez besoin pour protéger les données de votre entreprise, tout en offrant à vos utilisateurs une expérience qui leur permet de mieux travailler à partir de n’importe quel appareil. Par exemple, vous pouvez limiter l’accès depuis l’extérieur du réseau de société ou restreindre l’accès aux appareils qui répondent aux stratégies de conformité.",
- "upsellRiskDescription": "Exiger une authentification multifacteur pour les événements à risque détectés par le système Machine Learning de Microsoft.",
- "upsellRiskTitle": "Protéger contre les risques",
- "upsellTitle": "Accès conditionnel",
- "upsellWhyTitle": "Pourquoi utiliser l'accès conditionnel ?",
- "userAppNoneOption": "Aucun",
- "userNamePlaceholderText": "Entrez le nom d'utilisateur.",
- "userNotSetSeletorLabel": "0 utilisateurs et groupes sélectionnés",
- "userOnlySelectionBladeExcludeDescription": "Sélectionner les utilisateurs à exclure de la stratégie",
- "userOrGroupSelectionCountDiffBannerText": "{0} configuré(s) dans cette stratégie a/ont été supprimé(s) du répertoire, mais cela n'affecte pas les autres utilisateurs et groupes dans la stratégie. La prochaine fois que vous mettrez à jour la stratégie, les utilisateurs et/ou les groupes supprimés seront supprimés automatiquement.",
- "userOrSPNotSetSelectorLabel": "0 utilisateurs ou identités de charge de travail sélectionnés",
- "userOrSPSelectionBladeTitle": "Utilisateurs ou identités de charge de travail",
- "userOrSPSelectorInfoBallonText": "Identités de l’annuaire auxquelles s’applique la stratégie, notamment les utilisateurs, les groupes et les principaux du service",
- "userRequired": "Utilisateur requis",
- "userRiskErrorBox": "La condition « Risque utilisateur » doit être sélectionnée lorsque l’option « Exiger la modification du mot de passe » est sélectionnée",
- "userRiskReauth": "La condition « Risque utilisateur » et non « Risque de connexion » doit être sélectionnée lorsque le contrôle de session « Exiger une modification du mot de passe » et « Fréquence de connexion à chaque fois » sont sélectionnés",
- "userSPRequired": "Utilisateur ou principal de service requis",
- "userSPSelectorTitle": "Identité de l’utilisateur ou de la charge de travail",
- "userSelectionBladeAllUsersAndGroups": "Tous les utilisateurs et groupes",
- "userSelectionBladeExcludeDescription": "Sélectionner les utilisateurs et groupes à exclure de la stratégie",
- "userSelectionBladeExcludeTabTitle": "Exclure",
- "userSelectionBladeExcludedSelectorTitle": "Sélectionner des utilisateurs et des groupes exclus",
- "userSelectionBladeIncludeDescription": "Sélectionner les utilisateurs auxquels cette stratégie s’applique",
- "userSelectionBladeIncludeTabTitle": "Inclure",
- "userSelectionBladeIncludedSelectorTitle": "Sélectionner",
- "userSelectionBladeSelectUsers": "Sélectionner les utilisateurs",
- "userSelectionBladeSelectedUsers": "Sélectionner des utilisateurs et des groupes",
- "userSelectionBladeTitle": "Utilisateurs et groupes",
- "userSelectorBladeTitle": "Utilisateurs",
- "userSelectorExcluded": "{0} exclu",
- "userSelectorGroupPlural": "{0} groupes",
- "userSelectorGroupSingular": "1 groupe",
- "userSelectorIncluded": "{0} inclus",
- "userSelectorInfoBallonText": "Utilisateurs et groupes du répertoire auquel la stratégie s'applique. Par exemple « groupe pilote »",
- "userSelectorSelected": "{0} sélectionné(s)",
- "userSelectorTitle": "Utilisateur",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} utilisateurs",
- "userSelectorUserSingular": "1 utilisateur",
- "userSelectorWithExclusion": "{0} et {1}",
- "usersGroupsLabel": "Utilisateurs et groupes",
- "viewApprovedAppsText": "Voir la liste des applications clientes approuvées",
- "viewCompliantAppsText": "Voir la liste des applications clientes protégées par une stratégie",
- "viewPolicyInformation": "Afficher les informations de stratégie",
- "vpnBladeTitle": "Connectivité VPN",
- "vpnCertCreateFailedMessage": "Erreur : {0}",
- "vpnCertCreateFailedTitle": "Impossible de créer {0}",
- "vpnCertCreateInProgressTitle": "Création de {0}",
- "vpnCertCreateSuccessMessage": "{0} créé avec succès.",
- "vpnCertCreateSuccessTitle": "{0} créé avec succès",
- "vpnCertNoRowsMessage": "Aucun certificat VPN n'a été trouvé",
- "vpnCertUpdateFailedMessage": "Erreur : {0}",
- "vpnCertUpdateFailedTitle": "Échec de la mise à jour de {0}",
- "vpnCertUpdateInProgressTitle": "Mise à jour de {0}",
- "vpnCertUpdateSuccessMessage": "{0} mis à jour avec succès.",
- "vpnCertUpdateSuccessTitle": "{0} mis à jour avec succès",
- "vpnFeatureInfo": "Pour plus d’informations sur la connectivité VPN et l'accès conditionnel, cliquez ici.",
- "vpnFeatureWarning": "Une fois qu'un certificat VPN a été créé dans le portail, Microsoft Entra ID commence à l'utiliser immédiatement pour émettre des certificats à courte durée vers le client VPN. Il est essentiel que le certificat VPN soit immédiatement déployé sur le serveur VPN pour éviter tout problème de validation des informations d'identification du client VPN.",
- "vpnMenuText": "Connectivité VPN",
- "vpncertDropdownDefaultOption": "Durée",
- "vpncertDropdownInfoBalloonContent": "Sélectionnez la durée du certificat que vous souhaitez créer",
- "vpncertDropdownLabel": "Sélectionner une durée",
- "vpncertDropdownOneyearOption": "1 année",
- "vpncertDropdownThreeyearOption": "3 années",
- "vpncertDropdownTwoyearOption": "2 années",
- "wednesday": "Mercredi",
- "whatIfCountry": "Pays/région",
- "whatIfCountryInfo": "Pays ou région où l'utilisateur se connecte.",
- "whatIfDevicePlatformInfo": "Plateforme d'appareil depuis laquelle l'utilisateur se connecte.",
- "whatIfEnterIpAddress": "Entrer l'adresse IP (par ex. : 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "Une adresse IP non valide a été spécifiée.",
- "whatIfIpAddress": "Adresse IP",
- "whatIfIpAddressInfo": "Adresse IP à partir de laquelle l'utilisateur se connecte.",
- "whatIfIpCountryInfoBoxText": "Si vous utilisez l'adresse IP ou le pays/la région, les deux champs sont nécessaires et doivent être correctement mappés ensemble.",
- "whatIfSelectCountry": "Sélectionner le pays ou la région...",
- "whatIfSelectDevicePlatform": "Sélectionner la plateforme d'appareil...",
- "whatIfSelectPrivateLink": "Sélectionner un lien privé...",
- "whatIfSelectSignInRisk": "Sélectionner le risque de connexion...",
- "whatIfSignInRisk": "Risque de connexion",
- "whatIfSignInRiskInfo": "Niveau de risque associé à la connexion",
- "whatIfUnknownAreas": "Zones inconnues",
- "windows365InfoBox": "La sélection de Windows 365 va affecter les connexions aux PC Cloud et aux hôtes de session de bureau virtuel Azure. Cliquez ici pour en savoir plus.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Identités de charge de travail (préversion)",
- "workloadIdentitiesLicenseText": "Une licence Premium P1 ou P2 d’identités de charge de travail est nécessaire pour modifier cette stratégie.",
- "workloadIdentity": "Identité de la charge de travail"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Non pris en charge",
- "supportEnding": "Fin du support",
- "supported": "Pris en charge"
- }
- },
- "SecurityTemplate": {
- "aSR": "Réduction de la surface d'attaque",
- "accountProtection": "Protection de compte",
- "allDevices": "Tous les appareils",
- "antivirus": "Antivirus",
- "antivirusReporting": "Rapports de l’antivirus (préversion)",
- "conditionalAccess": "Accès conditionnel",
- "deviceCompliance": "Conformité de l'appareil",
- "diskEncryption": "Chiffrement de disque",
- "eDR": "Détection et réponse des points de terminaison",
- "ePM": "Gestion des privilèges de point de terminaison",
- "firewall": "Pare-feu",
- "helpSupport": "Aide et support",
- "setup": "Installation",
- "wdapt": "Microsoft Defender pour point de terminaison"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Échec",
- "hardReboot": "Redémarrage matériel",
- "retry": "Réessayer",
- "softReboot": "Redémarrage logiciel",
- "success": "Opération réussie"
- },
- "Columns": {
- "codeType": "Type de code",
- "returnCode": "Code de retour"
- },
- "bladeTitle": "Codes de retour",
- "gridAriaLabel": "Codes de retour",
- "header": "Spécifier des codes de retour pour indiquer le comportement postinstallation :",
- "onAddAnnounceMessage": "Le code de retour a ajouté l'élément {0} sur {1}",
- "onDeleteSuccess": "Le code de retour {0} a été correctement supprimé",
- "returnCodeAlreadyUsedValidation": "Code de retour déjà utilisé.",
- "returnCodeMustBeIntegerValidation": "Le code de retour doit être un entier.",
- "returnCodeShouldBeAtLeast": "Le code de retour doit être au moins {0}.",
- "returnCodeShouldBeAtMost": "Le code de retour doit être au plus {0}.",
- "selectorLabel": "Codes de retour"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabe",
- "bulgarian": "Bulgare",
- "chineseSimplified": "Chinois (simplifié)",
- "chineseTraditional": "Chinois (traditionnel)",
- "croatian": "Croate",
- "czech": "Tchèque",
- "danish": "Danois",
- "dutch": "Néerlandais",
- "englishUK": "Anglais (Royaume-Uni)",
- "englishUS": "Anglais (États-Unis)",
- "estonian": "Estonien",
- "finnish": "Finnois",
- "frenchCanada": "Français (Canada)",
- "frenchFrance": "Français (France)",
- "german": "Allemand",
- "greek": "Grec",
- "hebrew": "Hébreu",
- "hungarian": "Hongrois",
- "italian": "Italien",
- "japanese": "Japonais",
- "korean": "Coréen",
- "latvian": "Letton",
- "lithuanian": "Lituanien",
- "norwegian": "Norvégien, Bokmål",
- "polish": "Polonais",
- "portugueseBrazil": "Portugais (Brésil)",
- "portuguesePortugal": "Portugais (Portugal)",
- "romanian": "Roumain",
- "russian": "Russe",
- "serbian": "Serbe",
- "slovak": "Slovaque",
- "slovenian": "Slovène",
- "spanishMexico": "Espagnol (Mexique)",
- "spanishSpain": "Espagnol (Espagne)",
- "swedish": "Suédois",
- "thai": "Thaïlande",
- "turkish": "Turc",
- "ukrainian": "Ukrainien"
- },
- "Summary": {
- "placeholder": "Sélectionnez un message de notification dans la partie gauche pour afficher un aperçu du contenu."
- },
- "companyContact": "Afficher les informations de contact",
- "companyLogo": "Afficher le logo de la société",
- "companyName": "Afficher le nom de la société",
- "createEditDescription": "Créez ou modifiez des modèles de messages de notification.",
- "createMessage": "Créer un message",
- "deviceDetails": "Afficher les détails de l’appareil",
- "deviceDetailsInfoBox": "Ce paramètre est désactivé par défaut, car la récupération des détails de l'appareil peut retarder la réception des notifications par e-mail.",
- "editImpactInfo": "La modification de ce modèle de message de notification affecte toutes les stratégies qui utilisent le modèle.",
- "editMessage": "Modifier le message",
- "email": "e-mail",
- "emailFooterTitle": "Pied de page de l'Email",
- "emailHeaderFooterInfo": "Les paramètres d’en-tête et de pied de page de l’e-mail pour les notifications par e-mail s’appuient sur les paramètres de personnalisation dans le nœud d’administration du client dans Endpoint Manager.",
- "emailHeaderTitle": "En-tête de l'Email",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Configurer les paramètres de personnalisation",
- "formSubTitle": "Créer ou modifier des e-mails de notification",
- "headerFooterSettingsTab": "Paramètres d’en-tête et de pied de page",
- "imgPreview": "Aperçu de l'image",
- "infotext": "Sélectionnez un message de notification. Pour créer une notification, accédez à Notification dans la section Gérer de la charge de travail Définir la conformité des appareils.",
- "iwLink": "Afficher le lien du site web du portail d’entreprise",
- "listEmpty": "Aucun modèle de message.",
- "listEmptySelectOnly": "Aucun modèle de message. Pour créer une notification, consultez Notifications dans la section Gérer de la charge de travail Définir la conformité des appareils.",
- "listSubTitle": "Liste des modèles de messages de notification",
- "listTitle": "Modèles de message de notification",
- "localizedNotificationMessageTemplates": "Modèles de message de notification localisés",
- "messageAssigned": "Impossible de supprimer ce modèle de message, car il est actuellement utilisé par une ou plusieurs stratégies de conformité.",
- "messageCapitalized": "Modèle de message de notification",
- "messageLowercase": "modèle de message de notification",
- "missingDefaultError": "Sélectionnez un modèle par défaut",
- "notificationMessageTemplates": "Modèles de message de notification",
- "rowValidationError": "Au moins un modèle de message est requis",
- "selectDescription": "Sélectionnez un message de notification. Pour créer une notification, accédez à Notifications dans la section Gérer de la charge de travail Définir la conformité des appareils.",
- "tenantValueText": "Valeur du locataire",
- "testEmailLabel": "Envoyer un aperçu de l'e-mail",
- "localeLabel": "Paramètres régionaux",
- "isDefaultLocale": "Est par défaut"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Nombre de jours à attendre avant l’application du redémarrage"
- },
"Description": {
"label": "Description"
},
+ "FeatureDeploymentSettings": {
+ "header": "Paramètres de déploiement de fonctionnalités"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Cette fonctionnalité ne peut pas passer un appareil à la version antérieure.",
+ "label": "Mise à jour de fonctionnalités à déployer"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Disponibilité du groupe final"
+ },
+ "GradualRolloutInterval": {
+ "label": "Nombre de jours entre les groupes"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Disponibilité du premier groupe"
+ },
"Name": {
"label": "Nom"
},
- "QualityUpdateRelease": {
- "label": "Accélérez l’installation des mises à jour qualité si la version du système d’exploitation de l’appareil est inférieure à :"
- },
- "bladeTitle": "Mises à jour qualité Windows 10 et versions ultérieures (préversion)",
- "loadError": "Échec du chargement !"
+ "OptionalUpdate": {
+ "label": "Mise à jour obligatoire ou facultative"
+ },
+ "RolloutOptions": {
+ "label": "Options de déploiement"
+ },
+ "RolloutSettings": {
+ "header": "Quand voulez-vous que la mise à jour soit disponible dans Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Configurer des balises d'étendue pour cette stratégie."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "Première date de disponibilité"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Désactivé",
+ "enabled": "Activé",
+ "infoBalloonContent": "Contrôler s’il faut installer la dernière mise à jour des fonctionnalités Windows 10 sur les appareils qui ne sont pas éligibles pour Windows 11",
+ "label": "Lorsqu'un appareil n'est pas éligible pour exécuter Windows 11, installez la dernière mise à jour des fonctionnalités de Windows 10",
+ "notApplicable": "N'est pas applicable",
+ "summaryLabel": "Installez Windows 10 sur des appareils non éligibles pour exécuter Windows 11"
+ },
+ "bladeTitle": "Déploiements de mises à jour de fonctionnalités",
+ "deploymentSettingsTitle": "Paramètres de déploiement",
+ "loadError": "Échec du chargement !",
+ "windows11EULA": "En sélectionnant cette mise à jour de fonctionnalité à déployer, vous acceptez que lors de l'application de ce système d'exploitation à un appareil, soit (1) la licence Windows applicable a été achetée via une licence en volume, soit (2) que vous êtes autorisé à lier votre organisation et acceptez sur son au nom des Termes du contrat de licence logiciel Microsoft pertinents qui se trouvent ici {0}."
},
+ "Notifications": {
+ "deploymentSaved": "« {0} » a été enregistré.",
+ "newFeatureUpdateDeploymentCreated": "Déploiement des mises à jour des fonctionnalités créé."
+ },
"TabName": {
- "qualityUpdateSettings": "Paramètres"
+ "deploymentSettings": "Paramètres de déploiement",
+ "groupAssignmentSettings": "Affectations",
+ "scopeSettings": "Balises d'étendue"
},
- "infoBoxText": "Le seul contrôle de mise à jour qualité dédié, qui n’est actuellement pas la stratégie d’anneau de mise à jour existante pour Windows 10 et versions ultérieures, permet d’accélérer les mises à jour qualité pour les appareils qui sont au-dessus d’un niveau de correctif spécifié. Des contrôles supplémentaires seront disponibles à l’avenir.",
+ "gradualRolloutLicenseWarning": "Cette fonctionnalité nécessite une licence spécifique.",
+ "gradualRolloutLicenseWarningEdit": "Cette fonctionnalité peut continuer à être utilisée et configurée jusqu’à ce que la stratégie soit enregistrée sans cette fonctionnalité sélectionnée.",
"licenseLearnMoreText": "En savoir plus sur les conditions préalables et les stratégies de mise à jour qualité.",
- "licenseWarningBoxText": "La création de stratégies de mise à jour qualité nécessite une licence spécifique.",
- "warningBoxText": "Alors que l’accélération des mises à jour logicielles peut contribuer à réduire la durée de la mise en conformité lorsque cela est nécessaire, cela a un impact plus grand sur la productivité de l’utilisateur final. La probabilité que ce dernier subisse un redémarrage pendant les heures de bureau est considérablement plus élevée."
+ "optionalUpdateWarning": "Facultatif disponible uniquement pour les mises à jour Windows 11",
+ "profileNameWarning": "Le nom doit comporter moins de 64 caractères",
+ "specificLicensingRequired": "Certaines fonctionnalités sélectionnées nécessitent une licence spécifique."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64 bits",
- "thirtyTwoBit": "32 bits"
- },
- "TACSettings": {
- "edgeSettings": "Paramètres de configuration Edge",
- "edgeWindowsDataProtectionSettings": "Paramètres de protection des données Microsoft Edge (Windows) - Préversion",
- "edgeWindowsSettings": "Paramètres de configuration Microsoft Edge (Windows) - Préversion",
- "generalAppConfig": "Configuration générale de l'application",
- "generalSettings": "Paramètres de configuration généraux",
- "outlookSMIMEConfig": "Paramètres S/MIME Outlook",
- "outlookSettings": "Paramètres de configuration Outlook",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Ajouter une limite réseau",
- "addNetworkBoundaryButton": "Ajouter une limite réseau...",
- "allowWindowsSearch": "Autoriser Windows Search à rechercher dans les données d'entreprise chiffrées et dans les applications du Windows Store",
- "authoritativeIpRanges": "La liste Plages IP de l'entreprise fait autorité (ne pas détecter automatiquement)",
- "authoritativeProxyServers": "La liste Serveurs proxy de l'entreprise fait autorité (ne pas détecter automatiquement)",
- "boundaryType": "Type de limite",
- "cloudResources": "Ressources cloud",
- "corporateIdentity": "Identité d'entreprise",
- "dataRecoveryCert": "Charger un certificat d'agent de récupération de données pour autoriser la récupération de données chiffrées",
- "editNetworkBoundary": "Modifier la limite réseau",
- "enrollmentState": "État de l'inscription",
- "iPv4Ranges": "Plages d'adresses IPv4",
- "iPv6Ranges": "Plages d'adresses IPv6",
- "internalProxyServers": "Serveurs proxy internes",
- "maxInactivityTime": "Durée maximale (en minutes) autorisée pendant laquelle l'appareil peut rester inactif avant d'être verrouillé par un mot de passe ou un code PIN",
- "maxPasswordAttempts": "Nombre d'échecs d'authentification autorisés avant la réinitialisation de l'appareil",
- "mdmDiscoveryUrl": "URL de détection MDM",
- "mdmRequiredSettingsInfo": "Cette stratégie s'applique uniquement à Windows 10 Édition anniversaire et supérieure. Cette stratégie utilise la Protection des informations Windows pour appliquer la protection.",
- "minimumPinLength": "Définir le nombre minimal de caractères obligatoires dans le code PIN",
- "name": "Nom",
- "networkBoundariesGridEmptyText": "Les limites réseau que vous ajoutez apparaissent ici",
- "networkBoundary": "Limite réseau",
- "networkDomainNames": "Domaines réseau",
- "neutralResources": "Ressources neutres",
- "passportForWork": "Utiliser Windows Hello Entreprise comme mode de connexion à Windows",
- "pinExpiration": "Spécifier la durée (en jours) pendant laquelle un code PIN peut être utilisé avant que le système demande à l'utilisateur de le changer",
- "pinHistory": "Spécifier le nombre d'anciens codes PIN associés à un compte d'utilisateur qui peuvent être réutilisés",
- "pinLowercaseLetters": "Configurer l'utilisation des lettres minuscules dans le code PIN Windows Hello Entreprise",
- "pinSpecialCharacters": "Configurer l'utilisation des caractères spéciaux dans le code PIN Windows Hello Entreprise",
- "pinUppercaseLetters": "Configurer l'utilisation des lettres majuscules dans le code PIN Windows Hello Entreprise",
- "protectUnderLock": "Empêcher les applications d'accéder aux données d'entreprise quand l'appareil est verrouillé. S'applique uniquement à Windows 10 Mobile",
- "protectedDomainNames": "Domaines protégés",
- "proxyServers": "Serveurs proxy",
- "requireAppPin": "Désactiver le code PIN de l'application quand le code PIN de l'appareil est géré",
- "requiredSettings": "Paramètres obligatoires",
- "requiredSettingsInfo": "Le changement d'étendue ou la suppression de cette stratégie entraîne le déchiffrement des données d'entreprise.",
- "revokeOnMdmHandoff": "Révoquer l'accès aux données protégées quand l'appareil s'inscrit à MDM",
- "revokeOnUnenroll": "Révoquer les clés de chiffrement lors de la désinscription",
- "rmsTemplateForEdp": "Spécifier l'ID de modèle à utiliser pour Azure RMS",
- "showWipIcon": "Afficher l'icône de protection des données d'entreprise",
- "type": "Type",
- "useRmsForWip": "Utiliser Azure RMS pour WIP",
- "value": "Valeur",
- "weRequiredSettingsInfo": "Cette stratégie s'applique uniquement à Windows 10 Creators Update et ultérieur. Cette stratégie utilise la Protection des informations Windows et la gestion des applications mobiles Windows pour appliquer la protection.",
- "wipProtectionMode": "Mode Protection des informations Windows",
- "withEnrollment": "Avec inscription",
- "withoutEnrollment": "Sans inscription"
+ "Platform": {
+ "all": "Tout",
+ "android": "Administrateur d'appareil Android",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Commune",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS et Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "Mac OS",
+ "unknown": "Inconnu",
+ "unsupported": "Non pris en charge",
+ "windows": "Windows",
+ "windows10": "Windows 10 et ultérieur",
+ "windows10CM": "Windows 10 et ultérieur (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographique",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Collaboration",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 et ultérieur",
+ "windows8And10": "Windows 8 et 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 et ultérieur",
+ "windows10AndWindowsServer": "Windows 10, Windows 11, et Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 et ultérieur (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "PC Windows"
+ },
+ "InstallIntent": {
+ "available": "Disponible pour les appareils inscrits",
+ "availableWithoutEnrollment": "Disponible avec ou sans inscription",
+ "required": "Obligatoire",
+ "uninstall": "Désinstaller"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filtrer",
+ "noFilters": "Aucun"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Auteur",
- "template": "Nom du modèle"
- },
- "Row": {
- "ariaLabel": "ligne {0} de {1} colonne {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Démarrez à partir de zéro et sélectionnez les propriétés souhaitées dans la bibliothèque des propriétés d’inventaire disponibles"
- },
- "SettingsCatalog": {
- "subtitle": "Commencez à partir de zéro et sélectionnez les paramètres de votre choix dans la bibliothèque des paramètres disponibles",
- "title": "Catalogue des paramètres"
- },
- "Templates": {
- "subtitle": "Les modèles contiennent des groupes de paramètres, organisés par fonctionnalité. Utilisez un modèle lorsque vous ne voulez pas créer des stratégies manuellement ou si vous voulez configurer des appareils pour accéder aux réseaux d’entreprise, par exemple pour la configuration du réseau Wi-Fi ou VPN.",
- "title": "Modèles"
- },
- "noData": "Aucun modèle de stratégie n’a été trouvé"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Client de bureau Project Online",
- "visioProRetail": "Visio Online Plan 2"
- },
- "Countries": {
- "ae": "Émirats arabes unis",
- "ag": "Antigua-et-Barbuda",
- "ai": "Anguilla",
- "al": "Albanie",
- "am": "Arménie",
- "ao": "Angola",
- "ar": "Argentine",
- "at": "Autriche",
- "au": "Australie",
- "az": "Azerbaïdjan",
- "bb": "Barbade",
- "be": "Belgique",
- "bf": "Burkina Faso",
- "bg": "Bulgarie",
- "bh": "Bahreïn",
- "bj": "Bénin",
- "bm": "Bermudes",
- "bn": "Brunéi Darussalam",
- "bo": "Bolivie",
- "br": "Brésil",
- "bs": "Bahamas",
- "bt": "Bhoutan",
- "bw": "Botswana",
- "by": "Bélarus",
- "bz": "Belize",
- "ca": "Canada",
- "cg": "République du Congo",
- "ch": "Suisse",
- "cl": "Chili",
- "cn": "Chine",
- "co": "Colombie",
- "cr": "Costa Rica",
- "cv": "Cabo Verde",
- "cy": "Chypre",
- "cz": "République tchèque",
- "de": "Allemagne",
- "dk": "Danemark",
- "dm": "Dominique",
- "do": "République dominicaine",
- "dz": "Algérie",
- "ec": "Équateur",
- "ee": "Estonie",
- "eg": "Égypte",
- "es": "Espagne",
- "fi": "Finlande",
- "fj": "Fidji",
- "fm": "États fédérés de Micronésie",
- "fr": "France",
- "gb": "Royaume-Uni",
- "gd": "Grenade",
- "gh": "Ghana",
- "gm": "Gambie",
- "gr": "Grèce",
- "gt": "Guatemala",
- "gw": "Guinée-Bissau",
- "gy": "Guyana",
- "hk": "Hong Kong",
- "hn": "Honduras",
- "hr": "Croatie",
- "hu": "Hongrie",
- "id": "Indonésie",
- "ie": "Irlande",
- "il": "Israël",
- "in": "Inde",
- "is": "Islande",
- "it": "Italie",
- "jm": "Jamaïque",
- "jo": "Jordanie",
- "jp": "Japon",
- "ke": "Kenya",
- "kg": "Kirghizistan",
- "kh": "Cambodge",
- "kn": "Saint-Christophe-et-Niévès",
- "kr": "République de Corée",
- "kw": "Koweït",
- "ky": "Cayman (îles)",
- "kz": "Kazakhstan",
- "la": "République démocratique populaire lao",
- "lb": "Liban",
- "lc": "Sainte-Lucie",
- "lk": "Sri Lanka",
- "lr": "Libéria",
- "lt": "Lituanie",
- "lu": "Luxembourg",
- "lv": "Lettonie",
- "md": "République de Moldova",
- "mg": "Madagascar",
- "mk": "Macédoine du Nord",
- "ml": "Mali",
- "mn": "Mongolie",
- "mo": "Macao",
- "mr": "Mauritanie",
- "ms": "Montserrat",
- "mt": "Malte",
- "mu": "Maurice",
- "mw": "Malawi",
- "mx": "Mexique",
- "my": "Malaisie",
- "mz": "Mozambique",
- "na": "Namibie",
- "ne": "Niger",
- "ng": "Nigéria",
- "ni": "Nicaragua",
- "nl": "Pays-Bas",
- "no": "Norvège",
- "np": "Népal",
- "nz": "Nouvelle-Zélande",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Pérou",
- "pg": "Papouasie-Nouvelle-Guinée",
- "ph": "Philippines",
- "pk": "Pakistan",
- "pl": "Pologne",
- "pt": "Portugal",
- "pw": "Palaos",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Roumanie",
- "ru": "Russie",
- "sa": "Arabie saoudite",
- "sb": "Salomon (îles)",
- "sc": "Seychelles",
- "se": "Suède",
- "sg": "Singapour",
- "si": "Slovénie",
- "sk": "Slovaquie",
- "sl": "Sierra Leone",
- "sn": "Sénégal",
- "sr": "Suriname",
- "st": "Sao Tomé-et-Principe",
- "sv": "El Salvador",
- "sz": "Swaziland",
- "tc": "Turques-et-Caïques",
- "td": "Tchad",
- "th": "Thaïlande",
- "tj": "Tadjikistan",
- "tm": "Turkménistan",
- "tn": "Tunisie",
- "tr": "Turquie",
- "tt": "Trinité-et-Tobago",
- "tw": "Taïwan",
- "tz": "Tanzanie",
- "ua": "Ukraine",
- "ug": "Ouganda",
- "us": "États-Unis",
- "uy": "Uruguay",
- "uz": "Ouzbékistan",
- "vc": "Saint-Vincent-et-les-Grenadines",
- "ve": "Venezuela",
- "vg": "Îles Vierges britanniques",
- "vn": "Vietnam",
- "ye": "Yémen",
- "za": "Afrique du Sud",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Canal actuel",
- "deferred": "Canal Entreprise semi-annuel",
- "firstReleaseCurrent": "Canal actuel (préversion)",
- "firstReleaseDeferred": "Canal Entreprise biannuel (préversion)",
- "monthlyEnterprise": "Canal d’entreprise mensuel",
- "placeHolder": "Sélectionner un élément"
- },
- "AppProtection": {
- "allAppTypes": "Cibler sur tous les types d'application",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Applications dans le profil professionnel Android",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Applications sur les appareils dédiés Android Enterprise avec le mode partagé Microsoft Entra",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Utilisateur de projet open source d’applications sur Android associé",
- "appsOnAndroidOpenSourceProjectUserless": "Applications sur un projet open source Android sans utilisateur",
- "appsOnIntuneManagedDevices": "Applications sur les appareils gérés par Intune",
- "appsOnUnmanagedDevices": "Applications sur les appareils non gérés",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Indisponible",
- "windows10PlatformLabel": "Windows 10 et ultérieur",
- "withEnrollment": "Avec inscription",
- "withoutEnrollment": "Sans inscription"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Rôle intégré",
- "customCloudPCRole": "Rôle Windows 365 personnalisé",
- "customIntuneRole": "Rôle Intune personnalisé",
- "customRole": "Rôle personnalisé"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} est inclus dans un ou plusieurs ensembles de stratégies. Si vous supprimez {0}, vous ne serez plus en mesure de l'affecter par l'intermédiaire de ces ensembles de stratégies. Supprimer quand même ?",
- "contentWithError": "{0} est peut-être inclus dans un ou plusieurs ensembles de stratégies. Si vous supprimez {0}, vous ne serez plus en mesure de l'affecter par l'intermédiaire de ces ensembles de stratégies. Supprimer quand même ?",
- "header": "Voulez-vous vraiment supprimer cette restriction ?"
- },
- "DeviceLimit": {
- "description": "Spécifiez le nombre maximal d'appareils qu'un utilisateur peut inscrire.",
- "header": "Restrictions de limite d'appareils",
- "info": "Définissez le nombre d'appareils que chaque utilisateur peut inscrire."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Doit être supérieur ou égal à 1.0.",
- "android": "Entrez un numéro de version valide. Exemples : 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Entrez un numéro de version valide. Par exemple : 5.0, 5.1.1",
- "iOS": "Entrez un numéro de version valide. Exemples : 9.0, 10.0, 9.0.2",
- "mac": "Entrez un numéro de version valide. Exemples : 10, 10.10, 10.10.1",
- "min": "La valeur minimale ne peut pas être inférieure à {0}",
- "minMax": "La version minimale ne peut pas être supérieure à la version maximale.",
- "windows": "Doit être la version 10.0 ou ultérieur. Laisser vide pour autoriser les appareils Windows 8.1",
- "windowsMobile": "Doit être la version 10.0 ou ultérieur. Laisser vide pour autoriser les appareils Windows 8.1"
- },
- "allPlatformsBlocked": "Toutes les plateformes d'appareils sont bloquées. Autorisez l'inscription des plateformes pour permettre leur configuration.",
- "blockManufacturerPlaceHolder": "Nom du fabricant",
- "blockManufacturersHeader": "Fabricants bloqués",
- "cannotRestrict": "Restriction non prise en charge",
- "configurationDescription": "Spécifiez les restrictions de configuration de plateforme que doit respecter un appareil pour l'inscription. Utilisez des stratégies de conformité pour restreindre les appareils après l'inscription. Définissez des versions au format major.minor.build. Les restrictions de version s'appliquent uniquement aux appareils inscrits avec le portail d'entreprise. Intune classe les appareils comme personnels par défaut. Une action supplémentaire est nécessaire pour classer les appareils comme appartenant à l'entreprise.",
- "configurationDescriptionLabel": "En savoir plus sur la définition de restrictions d’inscription",
- "configurations": "Configurer des plateformes",
- "deviceManufacturer": "Fabricant du périphérique",
- "header": "Restrictions de type d'appareil",
- "info": "Définissez les types de plateforme, de version et de gestion qui peuvent être inscrits.",
- "manufacturer": "Fabricant",
- "max": "Max",
- "maxVersion": "Version maximale",
- "min": "Min",
- "minVersion": "Version minimale",
- "newPlatforms": "Vous avez autorisé de nouvelles plateformes. Mettez à jour les configurations de plateforme.",
- "personal": "Propriété personnelle",
- "platform": "Plateforme",
- "platformDescription": "Vous pouvez autoriser l'inscription des plateformes suivantes. Bloquez seulement les plateformes que vous ne pouvez pas prendre en charge. Les plateformes autorisées peuvent être configurées avec des restrictions d'inscription supplémentaires.",
- "platformSettings": "Paramètres de plateforme",
- "platforms": "Sélectionner des plateformes",
- "platformsSelected": "{0} plateformes sélectionnées",
- "type": "Type",
- "versions": "versions",
- "versionsRange": "Autoriser des valeurs min./max. :",
- "windowsTooltip": "Restreint l'inscription par le biais de la gestion des appareils mobiles (MDM). Ne restreint pas l'installation de l'agent de PC. Seules les versions Windows 10 et Windows 11 sont prises en charge. N'indiquez pas de version afin d'autoriser Windows 8.1."
- },
- "Priority": {
- "saved": "Les priorités de restriction ont été enregistrées."
- },
- "Row": {
- "announce": "Priorité : {0}. Nom : {1}. Attribué : {2}"
- },
- "Table": {
- "deployed": "Déployées",
- "name": "Nom",
- "priority": "Priorité"
- },
- "Type": {
- "limit": "Restriction du nombre limite d'appareils",
- "type": "Restriction du type d'appareil"
- },
- "allUsers": "Tous les utilisateurs",
- "androidRestrictions": "Restrictions Android",
- "create": "Créer une restriction",
- "defaultLimitDescription": "Il s'agit de la restriction de limite d'appareils par défaut appliquée avec la priorité la plus basse à tous les utilisateurs, quelle que soit leur appartenance à un groupe.",
- "defaultTypeDescription": "Il s'agit de la restriction de type d'appareil par défaut appliquée avec la priorité la plus basse à tous les utilisateurs, quelle que soit leur appartenance à un groupe.",
- "defaultWhfbDescription": "Il s'agit de la configuration par défaut de Windows Hello Entreprise appliquée avec la priorité la plus basse à tous les utilisateurs, quelle que soit leur appartenance à un groupe.",
- "deleteMessage": "Les utilisateurs impactés seront limités par la restriction de priorité la plus élevée suivante qui a été affectée, ou par la restriction par défaut si aucune autre restriction n'est affectée.",
- "deleteTitle": "Voulez-vous vraiment supprimer la restriction {0} ?",
- "descriptionHint": "Court paragraphe décrivant l'utilisation professionnelle ou le niveau de restriction caractérisé par les paramètres de restriction.",
- "edit": "Modifier la restriction",
- "info": "Un appareil doit respecter les restrictions d'inscription affectées à l'utilisateur qui ont la priorité la plus haute. Vous pouvez faire glisser une restriction d'appareil pour changer sa priorité. Les restrictions par défaut ont la priorité la plus basse pour tous les utilisateurs et régissent les inscriptions sans utilisateur. Les restrictions par défaut peuvent être modifiées, mais pas supprimées.",
- "iosRestrictions": "Restrictions iOS",
- "mDM": "GPM",
- "macRestrictions": "Restrictions MacOS",
- "maxVersion": "Version maximale",
- "minVersion": "Version minimale",
- "nameHint": "Il s'agit de l'attribut principal visible pour identifier le jeu de restrictions.",
- "noAssignmentsStatusBar": "Affectez une restriction à au moins un groupe. Cliquez sur Propriétés.",
- "nonAdminForbiddenCreateError": "Vous devez être Intune Service ou Administrateur(-trice) général(e) pour créer, modifier ou supprimer des restrictions.",
- "nonAdminForbiddenEdit": "Vous devez être administrateur pour modifier les restrictions.",
- "notFound": "Restriction introuvable.Elle a peut-être déjà été supprimée.",
- "personallyOwned": "Appareils personnels",
- "restriction": "Restriction",
- "restrictionLowerCase": "restriction",
- "restrictionType": "Restriction Type",
- "selectType": "Sélectionner le type de restriction",
- "selectValidation": "Sélectionnez une plateforme",
- "typeHint": "Choisissez Restriction de type d'appareil pour restreindre les propriétés de l'appareil. Choisissez Restriction de limite d'appareils pour limiter le nombre d'appareils par utilisateur.",
- "typeRequired": "Le type de restriction est obligatoire.",
- "winPhoneRestrictions": "Restrictions Windows Phone",
- "windowsECv1Info": "Les restrictions d’inscription plus anciennes ne peuvent pas être modifiées ou redimensionnées. Seules les restrictions ont été supprimées.",
- "windowsECv2Info": "Vous pouvez classer par ordre de priorité les restrictions d’inscription en les faisant glisser et en les supprimant. Affichez les restrictions par défaut et préconfigurées ci-dessous. Toutes les nouvelles restrictions d’inscription auront une priorité supérieure à celle des restrictions par défaut et préconfigurées.",
- "windowsRestrictions": "Restrictions Windows",
- "windowsRestrictionsPreview": "Restrictions Windows basées sur les filtres (préversion)"
- },
- "InstallContextType": {
- "device": "Appareil",
- "deviceContext": "Contexte d'appareil",
- "user": "Utilisateur",
- "userContext": "Contexte utilisateur"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Description",
- "placeholder": "Entrer une description"
- },
- "NameTextBox": {
- "label": "Nom",
- "placeholder": "Entrer un nom"
- },
- "PublisherTextBox": {
- "label": "Éditeur",
- "placeholder": "Entrer un éditeur"
- },
- "VersionTextBox": {
- "label": "Version"
- },
- "headerDescription": "Créez un package de script personnalisé à partir des scripts de détection et de correction que vous avez écrits."
- },
- "ScopeTags": {
- "headerDescription": "Sélectionnez un ou plusieurs groupes pour attribuer le package de script."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Script de détection",
- "placeholder": "Texte du script d’entrée",
- "requiredValidationMessage": "Entrez le script de détection"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Appliquer la vérification de la signature du script"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Exécuter ce script en utilisant les informations d’identification de l’utilisateur connecté"
- },
- "RemediationScript": {
- "infoBox": "Ce script s’exécute en mode détection seule, car il n’existe pas de script de correction."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Script de correction",
- "placeholder": "Texte du script d’entrée"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Exécuter le script dans PowerShell 64 bits"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Script non valide. Un ou plusieurs caractères utilisés dans le script ne sont pas valides."
- },
- "headerDescription": "Créez un package de script personnalisé à partir des scripts que vous avez écrits. Par défaut, les scripts s’exécuteront tous les jours sur les appareils concernés.",
- "infoBox": "Ce script est en lecture seule. Certains paramètres de ce script sont peut-être désactivés."
- },
- "title": "Créer un script personnalisé",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Intervalle",
- "time": "Date et heure"
- },
- "Interval": {
- "day": "Se répète chaque jour",
- "days": "Se répète tous les {0} jours",
- "hour": "Se répète toutes les heures",
- "hours": "Se répète toutes les {0} heures",
- "month": "Se répète tous les mois",
- "months": "Se répète tous les {0} mois",
- "week": "Se répète chaque semaine",
- "weeks": "Se répète toutes les {0} semaines"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) le {1}",
- "withDate": "{0} le {1}"
- }
- }
- },
- "Edit": {
- "title": "Modifier - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "URL autorisées",
- "tooltip": "Spécifiez les sites auxquels vos utilisateurs peuvent accéder dans leur contexte de travail. Aucun autre site n'est autorisé. Vous pouvez choisir de configurer une liste autorisée ou bloquée, mais pas les deux."
- },
- "ApplicationProxyRedirection": {
- "header": "Proxy d'application",
- "title": "Redirection du proxy d'application",
- "tooltip": "Activez la redirection du proxy d'application pour permettre aux utilisateurs d'accéder aux liens d'entreprise et aux applications web locales."
- },
- "BlockedURLs": {
- "title": "URL bloquées",
- "tooltip": "Spécifiez les sites auxquels vos utilisateurs ne peuvent pas accéder dans leur contexte de travail. Tous les autres sites sont autorisés. Vous pouvez choisir de configurer une liste autorisée ou bloquée, mais pas les deux. "
- },
- "Bookmarks": {
- "header": "Signets gérés",
- "tooltip": "Entrez une liste d'URL avec signet que vos utilisateurs peuvent utiliser dans Microsoft Edge dans leur contexte de travail.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Page d'accueil gérée",
- "title": "URL du raccourci de page d'accueil",
- "tooltip": "Configurez un raccourci de page d'accueil représenté par la première icône sous la barre de recherche quand les utilisateurs ouvrent un nouvel onglet dans Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Rediriger les sites restreints vers un contexte personnel",
- "tooltip": "Configurez s'il faut autoriser les utilisateurs à basculer sur leur contexte personnel pour ouvrir les sites restreints."
- }
- },
- "BooleanActions": {
- "allow": "Accorder",
- "block": "Bloquer",
- "configured": "Configuré",
- "disable": "Désactiver",
- "dontRequire": "N'exigent pas",
- "enable": "Activer",
- "hide": "Masquer",
- "limit": "Limite",
- "notConfigured": "Non configuré",
- "require": "Exiger",
- "show": "Afficher",
- "yes": "Oui"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Mettre à la disposition des utilisateurs en tant que mise à jour facultative",
- "optionalValue": "Facultatif",
- "required": "Mettre à la disposition des utilisateurs en tant que mise à jour obligatoire",
- "requiredValue": "Obligatoire"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 jour",
- "twoDays": "2 jours",
- "zeroDays": "0 jour"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Vue d'ensemble"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Recherchez par appareil, utilisateur ou version de mise à jour qualité."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Échec du chargement des profils de mise à jour logicielle iOS"
- }
- },
- "SummaryBlade": {
- "subtitle": "Profil de mise à jour iOS",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profil"
- },
- "listLoadError": "Impossible de charger les profils de mise à jour logicielle d'iOS. Réessayez plus tard",
- "lowercase": "Stratégie de mise à jour iOS",
- "uppercase": "Stratégie de mise à jour iOS"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Nous sommes désolés, car nous ne pouvons pas nous connecter à Apple pour obtenir la liste des versions disponibles. Réessayez plus tard ou passez à la dernière version.",
- "latestUpdate": "Dernière mise à jour",
- "noLongerSupported": "La version sélectionnée n'est plus prise en charge",
- "olderVersionSelected": "Dans la mesure où vous avez sélectionné une version antérieure, veillez à appliquer une stratégie de restriction d’appareil qui diffère la visibilité des mises à jour logicielles pour que les appareils ne puissent pas effectuer de mise à jour vers la dernière version.",
- "prefix": "Installer iOS/iPadOS",
- "selectSupported": "Sélectionner la mise à jour de version prise en charge par Apple",
- "updateToInstall": "Mise à jour à installer"
- },
- "Schedule": {
- "always": "Mettre à jour au prochain check-in",
- "duringTimeWindows": "Mettre à jour pendant l'intervalle planifié",
- "header": "Par défaut, quand une stratégie de mises à jour est attribuée à un appareil, Intune déploie les dernières mises à jour au check-in de l’appareil. Au lieu de cela, vous pouvez créer une planification hebdomadaire avec des heures de début et de fin personnalisées. Si vous choisissez d’effectuer une mise à jour en dehors de l’intervalle planifié, Intune ne déploie pas les mises à jour avant la fin de l’intervalle planifié.",
- "infoBalloon": "Quand les mises à jour seront effectuées. Une entrée supplémentaire est nécessaire pour planifier les mises à jour pendant ou en dehors des heures planifiées.",
- "label": "Type de planification",
- "outsideActiveHours": "Mise à jour en dehors des heures actives (héritées)",
- "outsideTimeWindows": "Mettre à jour en dehors de l'intervalle planifié",
- "timeWindow": "Fenêtre de temps",
- "timeZone": "Fuseau horaire",
- "title": "Paramètres de planification de la stratégie de mise à jour :",
- "weekly": "Planification hebdomadaire",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "Version d’iOS/iPadOS à installer sur les appareils au moment de la mise à jour.",
- "label": "Sélectionnez la version à installer"
- },
- "header": "Créez un profil pour forcer les appareils attribués à installer automatiquement les dernières mises à jour iOS/iPadOS. Ces paramètres déterminent quand et comment les mises à jour logicielles sont déployées. Ce profil n’empêche pas les utilisateurs de mettre à jour manuellement le système d’exploitation, ce qui peut être empêché pendant une période allant jusqu’à 90 jours avec la stratégie de restriction de la configuration d’appareils. Les mises à jour s’appliquent uniquement aux appareils supervisés.",
- "notAvailable": "N/A"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Il n'existe aucune stratégie de mise à jour d'iOS à afficher",
- "macOsUpdates": "Il n'existe aucune stratégie de mise à jour logicielle macOS à afficher",
- "windowsUpdates": "Aucun anneau de mise à jour pour Windows 10 et versions ultérieures à afficher."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Nom de l'appareil",
- "deviceUpdateStatus": "État de la mise à jour de l'appareil",
- "lastUpdated": "Dernière mise à jour",
- "osVersion": "Version du système d'exploitation",
- "userPrincipalName": "Nom d'utilisateur"
- },
- "maximumOSVersionFilter": "Version maximale du système d'exploitation",
- "minimumOSVersionFilter": "Version minimale du système d'exploitation",
- "noData": "Aucune donnée à afficher",
- "searchBoxPlaceholder": "Rechercher par nom d'appareil, nom d'utilisateur ou version de système d'exploitation",
- "title": "Récapitulatif des comptes pour les appareils macOS"
- },
- "Category": {
- "configurationDataFile": "Fichier de données de configuration",
- "critical": "Critique",
- "firmware": "BIOS",
- "other": "Autre"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Dernière mise à jour",
- "successfulUpdateCount": "Mises à jour déployées",
- "totalUpdateCount": "Total de mises à jour déployées",
- "updateCategory": "Catégorie de mise à jour",
- "updateCategoryStatus": "État de la catégorie de mise à jour"
- },
- "noData": "Aucune donnée à afficher"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Échec du chargement des profils de mise à jour logicielle macOS"
- }
- },
- "State": {
- "available": "Disponibles",
- "commandFailed": "Échec de la commande",
- "downloadFailed": "Échec du téléchargement",
- "downloadInsufficientNetwork": "Réseau insuffisant pour le téléchargement",
- "downloadInsufficientPower": "Batterie insuffisante pour le téléchargement",
- "downloadInsufficientSpace": "Espace insuffisant pour le téléchargement",
- "downloaded": "Téléchargé",
- "downloading": "Téléchargement",
- "idle": "Inactif",
- "installFailed": "L'installation a échoué",
- "installInsufficientPower": "Batterie insuffisante pour l'installation",
- "installInsufficientSpace": "Espace insuffisant pour l'installation",
- "installing": "Installation",
- "scheduled": "Planifiée",
- "success": "Opération réussie",
- "unknown": "Inconnu"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Dernière mise à jour",
- "updateName": "Nom de la mise à jour",
- "updateStatus": "État de la mise à jour",
- "version": "Version"
- },
- "noData": "Aucune donnée à afficher",
- "searchBoxPlaceholder": "Rechercher par nom ou version de mise à jour"
- },
- "SummaryBlade": {
- "subtitle": "Profil de mise à jour de macOS",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profil"
- },
- "error": "Erreur",
- "errorOrErrors": "Erreur(s)",
- "errors": "Erreurs",
- "listLoadError": "Impossible de charger les profils de mise à jour logicielle de macOS. Réessayez plus tard",
- "lowercase": "Stratégie de mise à jour de macOS",
- "other": "Autre",
- "subtitle": "Mise à jour logicielle macOS",
- "upToDate": "À jour",
- "uppercase": "Stratégie de mise à jour de macOS"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Veuillez recommencer ultérieurement",
- "title": "Échec de la suppression de {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Veuillez recommencer ultérieurement"
- },
- "LoadConfigurationFailed": {
- "description": "Veuillez recommencer ultérieurement",
- "title": "Échec du chargement de {0}"
- },
- "idWrongFormat": "L’ID fourni pour le profil n’est pas au format attendu."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "Au moins une propriété doit être sélectionnée",
- "tooMany": "Vous pouvez configurer un maximum de 20 fenêtres temporelles"
- }
- },
- "endDay": "Jour de fin",
- "endTime": "Heure de fin",
- "startDay": "Jour de début",
- "startTime": "Heure de début",
- "timeWindowError": "Choisissez une fenêtre temporelle qui s’étend sur au moins une heure."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Échec du chargement des profils d’anneau de mise à jour pour Windows 10 et versions ultérieures."
- }
- },
- "SummaryBlade": {
- "subtitle": "Mettre à jour l’anneau pour Windows 10 et versions ultérieures",
- "title": "Windows Update pour Entreprise"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 et ultérieur",
- "title": "Mettre à jour l’anneau pour Windows 10 et versions ultérieures"
- },
- "listLoadError": "Impossible de charger les profils d’anneaux de mise à jour pour Windows 10 et versions ultérieures, réessayez plus tard",
- "lowercase": "Anneau de mise à jour",
- "uppercase": "Anneau de mise à jour"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Mettre à jour les paramètres de la stratégie",
- "updateRingSettings": "Paramètres d'anneau de mise à jour"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Créer {0}",
- "edit": "Modifier {0}"
- }
- },
- "notScannedYet": "Pas encore analysé",
- "outOfDateIosDevices": "Appareils iOS obsolètes"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Restrictions d'appareil (propriétaire de l'appareil)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "Stratégie de mise à jour iOS"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Est égal à",
+ "greaterThan": "Supérieur à",
+ "greaterThanOrEqualTo": "Supérieur ou égal à",
+ "lessThan": "Inférieur à",
+ "lessThanOrEqualTo": "Inférieur ou égal à",
+ "notEqualTo": "Différent de"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Appliquer la vérification de signature de script et exécuter le script sans avertissement",
+ "enforceSignatureCheckTooltip": "Sélectionnez 'Oui' pour vérifier que le script est signé par un éditeur approuvé, ce qui permet de l'exécuter sans afficher d'avertissements ni d'invites. Le script s'exécute sans blocage. Sélectionnez 'Non' (par défaut) pour exécuter le script avec confirmation de l'utilisateur final sans vérification de signature.",
+ "header": "Utiliser un script de détection personnalisé",
+ "runAs32Bit": "Exécuter le script comme processus 32 bits sur des clients 64 bits",
+ "runAs32BitTooltip": "Sélectionnez 'Oui' pour exécuter le script dans un processus 32 bits sur des clients 64 bits. Sélectionnez 'Non' (par défaut) pour exécuter le script dans un processus 64 bits sur des clients 64 bits. Les clients 32 bits exécutent le script dans un processus 32 bits.",
+ "scriptContent": "Contenu de script",
+ "scriptFile": "Fichier de script",
+ "scriptFileNotSelectedValidation": "Aucun fichier de script sélectionné.",
+ "scriptFileTooltip": "Sélectionnez un script PowerShell qui détecte la présence de l'application sur le client. L'application est détectée quand le script retourne un code de sortie de valeur 0 et écrit une valeur de chaîne dans STDOUT.",
+ "scriptSizeLimitValidation": "Votre script de détection dépasse la taille maximale autorisée. Résolvez ce problème en réduisant la taille de votre script de détection."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Date de création",
+ "dateModified": "Date de modification",
+ "doesNotExist": "Le fichier ou dossier n'existe pas",
+ "fileOrFolderExists": "Le fichier ou le dossier existe",
+ "sizeInMB": "Taille en Mo",
+ "version": "Chaîne (version)"
+ },
+ "associatedWith32Bit": "Associé à une application 32 bits sur des clients 64 bits",
+ "associatedWith32BitTooltip": "Sélectionnez 'Oui' pour développer des variables d'environnement path dans le contexte 32 bits sur des clients 64 bits. Sélectionnez 'Non' (par défaut) pour développer des variables path dans le contexte 64 bits sur des clients 64 bits. Les clients 32 bits utilisent toujours le contexte 32 bits.",
+ "detectionMethod": "Méthode de détection",
+ "detectionMethodTooltip": "Sélectionnez le type de méthode de détection utilisé pour valider la présence de l'application.",
+ "fileOrFolder": "Fichier ou dossier",
+ "fileOrFolderToolTip": "Fichier ou dossier à détecter.",
+ "operator": "Opérateur",
+ "operatorTooltip": "Sélectionnez l'opérateur de la méthode de détection utilisée pour valider la comparaison.",
+ "path": "Chemin d'accès",
+ "pathTooltip": "Chemin complet du dossier contenant le fichier ou le dossier à détecter.",
+ "value": "Valeur",
+ "valueTooltip": "Sélectionnez une valeur correspondant à la méthode de détection sélectionnée. Les méthodes de détection de date doivent être entrées en heure locale."
+ },
+ "GridColumns": {
+ "pathOrCode": "Chemin/Code",
+ "type": "Type"
+ },
+ "MsiRule": {
+ "operator": "Opérateur",
+ "operatorTooltip": "Sélectionnez l'opérateur de la comparaison de validation de version de produit MSI.",
+ "productCode": "Code de produit MSI",
+ "productCodeTooltip": "Code de produit MSI valide pour l'application.",
+ "productVersion": "Valeur",
+ "productVersionCheck": "Vérification de la version de produit MSI",
+ "productVersionCheckTooltip": "Sélectionnez 'Oui' pour vérifier la version de produit MSI en plus du code de produit MSI.",
+ "productVersionTooltip": "Entrez la version de produit MSI de l'application."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Comparaison d'entiers",
+ "keyDoesNotExist": "La clé n'existe pas",
+ "keyExists": "La clé existe",
+ "stringComparison": "Comparaison de chaînes",
+ "valueDoesNotExist": "La valeur n'existe pas",
+ "valueExists": "La valeur existe",
+ "versionComparison": "Comparaison de versions"
+ },
+ "associatedWith32Bit": "Associé à une application 32 bits sur des clients 64 bits",
+ "associatedWith32BitTooltip": "Sélectionnez 'Oui' pour rechercher dans le Registre 32 bits sur des clients 64 bits. Sélectionnez 'Non' (par défaut) pour rechercher dans le Registre 64 bits sur des clients 64 bits. Les clients 32 bits recherchent toujours dans le Registre 32 bits.",
+ "detectionMethod": "Méthode de détection",
+ "detectionMethodTooltip": "Sélectionnez le type de méthode de détection utilisé pour valider la présence de l'application.",
+ "keyPath": "Chemin de la clé",
+ "keyPathTooltip": "Chemin complet de l'entrée de Registre contenant la valeur à détecter.",
+ "operator": "Opérateur",
+ "operatorTooltip": "Sélectionnez l'opérateur de la méthode de détection utilisée pour valider la comparaison.",
+ "value": "Valeur",
+ "valueName": "Nom de valeur",
+ "valueNameTooltip": "Nom de la valeur de Registre à détecter.",
+ "valueTooltip": "Sélectionnez une valeur correspondant à la méthode de détection sélectionnée."
+ },
+ "RuleTypeOptions": {
+ "file": "Fichier",
+ "mSI": "MSI",
+ "registry": "Registre"
+ },
+ "gridAriaLabel": "Règles de détection",
+ "header": "Créez une règle qui indique la présence de l'application.",
+ "noRulesSelectedPlaceholder": "Aucune règle spécifiée.",
+ "ruleTableLimit": "Vous pouvez ajouter jusqu’à 25 règles de détection",
+ "ruleType": "Type de règle",
+ "ruleTypeTooltip": "Choisissez le type de règle de détection à ajouter."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Utiliser un script de détection personnalisé",
+ "manual": "Configurer manuellement les règles de détection"
+ },
+ "bladeTitle": "Règles de détection",
+ "header": "Configurez des règles propres à l'application pour détecter la présence de l'application.",
+ "rulesFormat": "Format des règles",
+ "rulesFormatTooltip": "Choisissez de configurer les règles de détection manuellement ou utilisez un script personnalisé pour détecter la présence de l'application.",
+ "selectorLabel": "Règles de détection"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Accepter les termes du contrat de licence logiciel Microsoft au nom des utilisateurs",
"appSuiteConfigurationLabel": "Configuration de la suite d'applications",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} langue(s) sélectionnée(s)",
"xmlConfigurationLabel": "Configuration XML"
},
- "Filters": {
- "ruleSyntax": "Syntaxe de la règle",
- "filters": "Filtres"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Autoriser l'utilisateur à changer le paramètre",
- "tooltip": "Indiquez si l'utilisateur est autorisé à changer le paramètre."
- },
- "AllowWorkAccounts": {
- "title": "Autoriser uniquement les comptes professionnels ou scolaires",
- "tooltip": " Si ce paramètre est activé, les utilisateurs ne peuvent pas ajouter de comptes e-mail et de stockage personnels dans Outlook. Si un utilisateur ajoute un compte personnel dans Outlook, il est invité à le supprimer. S'il ne le supprime pas, l'ajout du compte professionnel ou scolaire échoue."
- },
- "BlockExternalImages": {
- "title": "Bloquer les images externes",
- "tooltip": "Si le blocage des images externes est activé, l'application empêche le téléchargement des images hébergées sur Internet qui sont incorporées dans le corps du message. S'il n'est pas configuré, le paramètre d'application par défaut a la valeur Désactivé"
- },
- "ConfigureEmail": {
- "title": "Configurer les paramètres du compte e-mail"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "La signature d'application par défaut indique si l'application utilise « Obtenir Outlook pour Android » comme signature par défaut pendant la composition du message. Si le paramètre est désactivé, la signature par défaut n'est pas utilisée. Toutefois, les utilisateurs peuvent ajouter leur propre signature.\r\n\r\nS'il est défini sur Non configuré, le paramètre d'application par défaut est activé.",
- "iOS": "La signature d'application par défaut indique si l'application utilise « Obtenir Outlook pour iOS » comme signature par défaut pendant la composition du message. Si le paramètre est désactivé, la signature par défaut n'est pas utilisée. Toutefois, les utilisateurs peuvent ajouter leur propre signature.\r\n\r\nS'il est défini sur Non configuré, le paramètre d'application par défaut est activé."
- },
- "title": "Signature d'application par défaut"
- },
- "OfficeFeedReplies": {
- "title": "Flux Discover",
- "tooltip": "Le flux Discover couvre vos fichiers Office les plus fréquemment consultés. Par défaut, ce flux est activé quand Delve est activé pour l'utilisateur. Si l'option n'est pas configurée, le paramètre d'application par défaut est défini sur Activé."
- },
- "OrganizeMailByThread": {
- "title": "Organiser le courrier par conversation",
- "tooltip": "Le comportement par défaut dans Outlook consiste à regrouper les conversations dans une vue par conversation. Si ce paramètre est désactivé, Outlook affiche les courriers individuellement et ne les regroupe pas par conversation."
- },
- "PlayMyEmails": {
- "title": "Lire mes e-mails",
- "tooltip": "La fonctionnalité Lire mes e-mails n’est pas activée par défaut dans l’application, mais elle est promue aux utilisateurs éligibles via une bannière dans la boîte de réception. Quand la valeur est Désactivé, cette fonctionnalité n’est pas promue aux utilisateurs éligibles dans l’application. Les utilisateurs peuvent choisir d’activer manuellement Lire mes e-mails à partir de l’application, même si cette fonctionnalité est désactivée. Quand la valeur n’est pas configurée, le paramètre d’application par défaut est activé et la fonctionnalité est promue aux utilisateurs éligibles."
- },
- "SuggestedReplies": {
- "title": "Réponses suggérées",
- "tooltip": "Quand vous ouvrez un message, Outlook peut suggérer des réponses sous le message. Si vous sélectionnez une réponse suggérée, vous pouvez la modifier avant de l'envoyer."
- },
- "SyncCalendars": {
- "title": "Synchroniser les calendriers",
- "tooltip": "Spécifie si les utilisateurs peuvent synchroniser leur calendrier Outlook avec la base de données et l’application du calendrier natif."
- },
- "TextPredictions": {
- "title": "Prédictions de texte",
- "tooltip": "Outlook peut suggérer des mots et des expressions quand vous composez des messages. Quand Outlook propose une suggestion, faites un balayage pour l’accepter. Quand l’option n’est pas configurée, le paramètre de l’application par défaut est défini sur Activé."
- },
- "ThemesEnabled": {
- "title": "Thèmes activés",
- "tooltip": "Spécifie si l’utilisateur est autorisé à utiliser un thème visuel personnalisé."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "Appareils ChromeOS"
- },
- "ManagedDesktop": {
- "adminContacts": "Contacts de l’administrateur",
- "appPackaging": "Empaquetage d’applications",
- "autopatchGroups": "Groupes de mise en pause automatique",
- "devices": "Appareils",
- "featureEnablement": "Activer la fonctionnalité",
- "feedback": "Commentaires",
- "gettingStarted": "Mise en route",
- "messages": "Messages",
- "onlineResources": "Ressources en ligne",
- "policyHealth": "Politique de santé",
- "policyHealthPreview": "Intégrité de la stratégie (préversion)",
- "releaseManagement": "Gestion des mises en production",
- "serviceRequests": "Demandes de service",
- "settings": "Paramètres",
- "supportRequests": "Demandes de support",
- "tenantEnrollment": "Inscription des locataires",
- "tenantManagement": "Gestion client"
- },
- "actions": "Actions en cas de non-conformité",
- "advancedExchangeSettings": "Paramètres Exchange Online",
- "advancedThreatProtection": "Microsoft Defender pour point de terminaison",
- "allApps": "Toutes les applications",
- "allDevices": "Tous les appareils",
- "androidFotaDeployments": "Déploiements d’Android FOTA",
- "appBundles": "Offres groupées d’applications",
- "appCategories": "Catégories d'applications",
- "appConfigPolicies": "Stratégies de configuration des applications",
- "appConfigurationStatus": "État de la configuration de l'application",
- "appInstallStatus": "État de l'installation de l'application",
- "appLicences": "Licences d'application",
- "appProtectionPolicies": "Stratégies de protection des applications",
- "appProtectionStatus": "État de la protection des applications",
- "appSelectiveWipe": "Réinitialisation sélective des applications",
- "appleVppTokens": "Jetons VPP Apple",
- "apps": "Applications",
- "assign": "Affectations",
- "assignedPermissions": "Autorisations attribuées",
- "assignedRoles": "Rôles affectés",
- "autopilotDeploymentReport": "Déploiements AutoPilot (préversion)",
- "autopilotDeploymentReportV2": "Déploiements de pilote automatique 2.0 (préversion)",
- "brandingAndCustomization": "Personnalisation",
- "cartProfiles": "Profils de panier",
- "certificateConnectors": "Connecteurs de certificat",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Appareils attachés au cloud (préversion)",
- "cloudPcActions": "Actions de PC cloud (préversion)",
- "cloudPcMaintenanceWindows": "Fenêtres de maintenance cloud PC (préversion)",
- "compliancePolicies": "Stratégies de conformité",
- "complianceScriptManagement": "Scripts",
- "complianceScriptManagementPreview": "Scripts (préversion)",
- "complianceSettings": "Paramètres de stratégie de conformité",
- "conditionStatements": "Énoncés des conditions",
- "conditions": "Emplacements",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Profils de configuration",
- "configurationScripts": "Scripts de configuration",
- "connectorsAndTokens": "Connecteurs et jetons",
- "corporateDeviceIdentifiers": "Identificateurs d'appareil d'entreprise",
- "customAttributes": "Attributs personnalisés",
- "customNotifications": "Notifications personnalisées",
- "deploymentSettings": "Paramètres de déploiement",
- "derivedCredentials": "Informations d’identification dérivées",
- "deviceActions": "Actions de l'appareil",
- "deviceCategories": "Catégories d'appareils",
- "deviceCleanUp": "Règles de nettoyage d'appareil",
- "deviceEnrollmentManagers": "Gestionnaires d'inscription d'appareil",
- "deviceExecutionStatus": "État de l'appareil",
- "deviceLimitEnrollmentRestrictions": "Restriction du nombre limite d’appareils lors de l’inscription",
- "deviceTypeEnrollmentRestrictions": "Restriction du type de plateforme d’appareil lors de l’inscription",
- "devices": "Appareils",
- "discoveredApps": "Applications découvertes",
- "edgePolicies": "Stratégies pour Microsoft Edge",
- "embeddedSIM": "Profils mobiles eSIM (préversion)",
- "enrollDevices": "Inscrire des appareils",
- "enrollmentFailures": "Échecs d'inscription",
- "enrollmentNotifications": "Notifications d’inscription (préversion)",
- "enrollmentRestrictions": "Restrictions d'inscription",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Connecteurs de services Exchange",
- "failuresForCumulativeQualityUpdates": "Échecs de mise à jour de qualité cumulative Windows",
- "failuresForDriverUpdates": "Échecs de mise à jour du pilote Windows",
- "failuresForFeatureUpdates": "Échec de la mise à jour des fonctionnalités",
- "failuresForQualityUpdates": "Échecs de la mise à jour accélérée de Windows",
- "featureFlighting": "Version d'évaluation des fonctionnalités",
- "featureUpdateDeployments": "Mises à jour des fonctionnalités pour Windows 10 et versions ultérieures",
- "flighting": "Distribution de version d'évaluation",
- "fotaUpdate": "Mise à jour de microprogramme en l’air",
- "groupPolicy": "Modèles d'administration",
- "groupPolicyAnalytics": "Analytique de la stratégie de groupe",
- "helpSupport": "Aide et support",
- "helpSupportReplacement": "Aide et support ({0})",
- "iOSAppProvisioning": "Profils de provisionnement d'application iOS",
- "incompleteUserEnrollments": "Inscriptions d'utilisateur incomplètes",
- "iosUpdates": "Stratégies de mise à jour pour iOS/iPadOS",
- "legacyPcManagement": "Gestion des PC existants",
- "macOSSoftwareUpdate": "Stratégies de mise à jour pour macOS",
- "macOSSoftwareUpdateAccountSummaries": "État d'installation des appareils macOS",
- "macOSSoftwareUpdateCategorySummaries": "Récapitulatif des mises à jour logicielles",
- "macOSSoftwareUpdateStateSummaries": "modifications",
- "managedGooglePlay": "Google Play géré",
- "msfb": "Microsoft Store pour Entreprises",
- "myPermissions": "Mes autorisations",
- "notifications": "Notifications",
- "officeApps": "Applications Office",
- "officeProPlusPolicies": "Stratégies pour les applications Office",
- "onPremise": "Local",
- "onPremisesConnector": "Connecteur local Exchange ActiveSync",
- "onPremisesDeviceAccess": "Appareils Exchange ActiveSync",
- "onPremisesManageAccess": "Accès à Exchange sur site",
- "outOfDateIosDevices": "Échecs d'installation pour les appareils iOS",
- "overview": "Vue d'ensemble",
- "partnerDeviceManagement": "Gestion des appareils partenaires",
- "perUpdateRingDeploymentState": "Par état d'anneau de déploiement de mises à jour",
- "permissions": "Autorisations",
- "platformApps": "{0} applications",
- "platformDevices": "{0} appareils",
- "platformEnrollment": "Inscription {0}",
- "policies": "Stratégies",
- "profiles": "Profils",
- "properties": "Propriétés",
- "reports": "Rapports",
- "retireNoncompliantDevices": "Mettre hors service les appareils non conformes",
- "retireNoncompliantDevicesPreview": "Mettre hors service les appareils non conformes (aperçu)",
- "role": "Rôle",
- "scriptManagement": "Scripts",
- "securityBaselines": "Bases de référence de sécurité",
- "serviceToServiceConnector": "Connecteur Exchange Online",
- "servicenowConnector": "Connecteur ServiceNow",
- "shellScripts": "Scripts shell",
- "teamViewerConnector": "Connecteur TeamViewer",
- "telecomeExpenseManagement": "Gestion des dépenses de télécommunication",
- "tenantAdmin": "Administrateur de locataire",
- "tenantAdministration": "Administration de locataire",
- "termsAndConditions": "Conditions générales",
- "titles": "Titres",
- "troubleshoot": "Résoudre des problèmes",
- "troubleshootSupport": "Dépannage + support",
- "user": "Utilisateur",
- "userExecutionStatus": "État de l'utilisateur",
- "wdacSupplementalPolicies": "Stratégies supplémentaires en mode S",
- "win32CatalogUpdateApp": "Mises à jour pour les applications de gestion des applications d’entreprise",
- "win32CatalogUpdateAppInPreview": "Mises à jour pour les applications de catalogue Windows (Win32) (préversion)",
- "windows10DriverUpdate": "Mises à jour des pilotes pour Windows 10 et versions ultérieures",
- "windows10QualityUpdate": "Mises à jour qualité pour Windows 10 et versions ultérieures",
- "windows10UpdateRings": "Boucles de mise à jour pour Windows 10 et versions ultérieures",
- "windows10XPolicyFailures": "Échecs de stratégie Windows 10X",
- "windows365PartnerConnector": "Connecteurs partenaires Windows 365",
- "windowsDiagnosticData": "Données Windows",
- "windowsEnterpriseCertificate": "Certificat d'entreprise Windows",
- "windowsManagement": "Scripts",
- "windowsSideLoadingKeys": "Clés de chargement indépendant Windows",
- "windowsSymantecCertificate": "Certificat Windows DigiCert",
- "windowsThreatReport": "État de l'agent de menace"
- },
- "ScopeTypes": {
- "allDevices": "Tous les appareils",
- "allUsers": "Tous les utilisateurs",
- "allUsersAndDevices": "Tous les utilisateurs et tous les appareils",
- "selectedGroups": "Groupes sélectionnés"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Recherche Microsoft en tant que valeur par défaut",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype Entreprise",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone et iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Non pris en charge",
+ "supportEnding": "Fin du support",
+ "supported": "Pris en charge"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Par défaut",
- "header": "Priorité de mise à jour",
- "postponed": "Différé",
- "priority": "Haute priorité"
- },
- "AutoUpdateSupersededApps": {
- "label": "Mise à jour automatique",
- "sublabel": "Si des applications remplacées ont été installées par l’utilisateur à partir de Portail d'entreprise, vous devez installer l’application de remplacement."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Arrière-plan ",
- "displayText": "Téléchargement de contenu dans {0}",
- "foreground": "Premier plan",
- "header": "Priorité d’optimisation de la distribution"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Autoriser l'utilisateur à répéter la notification de redémarrage",
- "countdownDialog": "Sélectionner quand afficher la boîte de dialogue de compte à rebours avant le redémarrage (en minutes)",
- "durationInMinutes": "Période de grâce de redémarrage de l'appareil (en minutes)",
- "snoozeDurationInMinutes": "Sélectionner la durée de répétition (en minutes)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Fuseau horaire",
- "local": "Fuseau horaire de l'appareil ",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Date et heure",
- "deadlineTimeColumnLabel": "Échéance d'installation",
- "deadlineTimeDatePickerErrorMessage": "La date sélectionnée doit être postérieure à la date disponible",
- "deadlineTimeLabel": "Date d’échéance de l’installation de l’application",
- "defaultTime": "Dès que possible",
- "infoText": "Cette application est disponible dès qu’elle a été déployée, sauf si vous spécifiez une heure de disponibilité ci-dessous. S’il s’agit d’une application obligatoire, vous pouvez spécifier l’échéance d’installation.",
- "specificTime": "Date et heure spécifiques",
- "startTimeColumnLabel": "Disponibilité",
- "startTimeDatePickerErrorMessage": "La date sélectionnée doit être antérieure à la date d’échéance",
- "startTimeLabel": "Disponibilité de l’application"
- },
- "restartGracePeriodHeader": "Période de grâce de redémarrage",
- "restartGracePeriodLabel": "Période de grâce de redémarrage de l'appareil",
- "summaryTitle": "Expérience utilisateur final"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "Fichier ou dossier comme spécification sélectionnée.",
- "pathToolTip": "Chemin complet du fichier ou dossier à détecter.",
- "property": "Propriété",
- "valueToolTip": "Sélectionnez une valeur de spécification qui correspond à la méthode de détection sélectionnée. La spécification de date et d'heure doit être entrée dans votre format local."
- },
- "GridColumns": {
- "pathOrScript": "Chemin/script",
- "type": "Type"
- },
- "Registry": {
- "keyPath": "Chemin de la clé",
- "keyPathTooltip": "Chemin complet de l'entrée de Registre contenant la valeur de la spécification.",
- "operator": "Opérateur",
- "operatorTooltip": "Sélectionnez l'opérateur de la comparaison.",
- "registryRequirement": "Spécification de clé de Registre",
- "registryRequirementTooltip": "Sélectionnez la comparaison des spécifications de clé de Registre.",
- "valueName": "Nom de valeur",
- "valueNameTooltip": "Nom de la valeur de Registre obligatoire."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Approuver automatiquement toutes les mises à jour de pilote recommandées",
+ "manual": "Approuver et déployer manuellement les mises à jour de pilotes"
+ },
+ "BulkActions": {
+ "button": "Actions en bloc"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Méthode d’approbation :"
},
- "RequirementTypeOptions": {
- "fileType": "Fichier",
- "registry": "Registre",
- "script": "Script"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Booléen",
- "dateTime": "Date et heure",
- "float": "Virgule flottante",
- "integer": "Entier",
- "string": "Chaîne",
- "version": "Version"
- },
- "duplicateName": "Le nom de script {0} est déjà utilisé. Entrez un autre nom.",
- "enforceSignatureCheck": "Appliquer la vérification de la signature du script",
- "enforceSignatureCheckTooltip": "Sélectionnez « Oui » pour vérifier que le script est signé par un éditeur approuvé, ce qui permet de l'exécuter sans avertissement ni invite. Le script s'exécute sans blocage. Sélectionnez « Non » (par défaut) pour exécuter le script avec confirmation de l'utilisateur final, mais sans vérification de signature.",
- "loggedOnCredentials": "Exécuter ce script en utilisant les informations d'identification de l'utilisateur connecté",
- "loggedOnCredentialsTooltip": "Exécutez le script à l'aide des informations d'identification connectées sur l'appareil.",
- "operatorTooltip": "Sélectionnez l'opérateur de la comparaison de spécifications.",
- "requirementMethod": "Sélectionner un type de données de sortie",
- "requirementMethodTooltip": "Sélectionnez le type de données utilisé pour déterminer une spécification de correspondance de détection.",
- "scriptContent": "Contenu de script",
- "scriptFile": "Fichier de script",
- "scriptFileTooltip": "Sélectionnez un script PowerShell qui détecte la présence de l'application sur le client. Si l'application est détectée, le processus de spécification fournit un code de sortie de valeur 0 et écrit une valeur de chaîne dans STDOUT.",
- "scriptName": "Nom du script",
- "value": "Valeur",
- "valueTooltip": "Sélectionnez une valeur de spécification qui correspond à la méthode de détection sélectionnée. La spécification de date et d'heure doit être entrée dans votre format local."
+ "DeploymentDeferralInDays": {
+ "label": "Mettre les mises à jour à disposition après",
+ "units": "(jours)",
+ "value": "{0} jours"
+ },
+ "DriverAction": {
+ "header": "Sélectionnez une action ci-dessous.",
+ "label": "Action du pilote",
+ "placeholder": "Sélectionner une action"
},
- "bladeTitle": "Ajouter une règle de spécification",
- "createRequirementHeader": "Créez une spécification.",
- "header": "Configurer d'autres règles de spécification",
- "label": "Règles de spécification supplémentaires",
- "noRequirementsSelectedPlaceholder": "Aucune spécification spécifiée.",
- "requirementType": "Type de spécification",
- "requirementTypeTooltip": "Choisissez le type de méthode de détection utilisé pour déterminer comment valider une spécification."
- },
- "architectures": "Architecture du système d'exploitation",
- "architecturesTooltip": "Choisissez les architectures nécessaires pour installer l'application.",
- "bladeTitle": "Spécifications",
- "diskSpace": "Espace disque nécessaire (Mo)",
- "diskSpaceTooltip": "Espace disque nécessaire sur le lecteur système pour installer l'application.",
- "header": "Spécifiez les conditions que les appareils doivent remplir avant l'installation de l'application :",
- "maximumTextFieldValue": "La valeur doit être de {0} maximum.",
- "minimumCpuSpeed": "Vitesse de processeur minimale nécessaire (MHz)",
- "minimumCpuSpeedTooltip": "Vitesse de processeur minimale nécessaire pour installer l'application.",
- "minimumLogicalProcessors": "Nombre minimal de processeurs logiques nécessaires",
- "minimumLogicalProcessorsTooltip": "Nombre minimal de processeurs logiques nécessaires pour installer l'application.",
- "minimumOperatingSystem": "Système d'exploitation minimal",
- "minimumOperatingSystemTooltip": "Sélectionnez le système d'exploitation minimum nécessaire pour installer l'application.",
- "minumumTextFieldValue": "La valeur doit correspondre au moins à {0}.",
- "physicalMemory": "Mémoire physique nécessaire (Mo)",
- "physicalMemoryTooltip": "Mémoire physique (RAM) nécessaire pour installer l'application.",
- "selectorLabel": "Spécifications",
- "validNumber": "Entrez un nombre valide."
- },
- "PolicySet": {
- "appManagement": "Gestion des applications",
- "assignments": "Attributions",
- "basics": "De base",
- "deviceEnrollment": "Inscription de l'appareil",
- "deviceManagement": "Gestion des appareils",
- "scopeTags": "Balises d'étendue",
- "appConfigurationTitle": "Stratégies de configuration des applications",
- "appProtectionTitle": "Stratégies de protection des applications",
- "appTitle": "Applications",
- "iOSAppProvisioningTitle": "Profils de provisionnement d'application iOS",
- "deviceLimitRestrictionTitle": "Restrictions de limite d'appareils",
- "deviceTypeRestrictionTitle": "Restrictions de type d'appareil",
- "enrollmentStatusSettingTitle": "Pages d'état d'inscription",
- "windowsAutopilotDeploymentProfileTitle": "Profils Windows AutoPilot Deployment",
- "deviceComplianceTitle": "Stratégies de conformité d'appareil",
- "deviceConfigurationTitle": "Profils de configuration d'appareil",
- "powershellScriptTitle": "Scripts PowerShell"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Pilotes inclus"
+ },
+ "SelectDrivers": {
+ "header": "Sélectionnez les pilotes à inclure dans votre action en bloc"
+ },
+ "SelectDriversToInclude": {
+ "button": "Sélectionner les pilotes à inclure"
+ },
+ "SelectLessDrivers": {
+ "validation": "Au plus une centaine de pilotes peuvent être sélectionnés"
+ },
+ "SelectMoreDrivers": {
+ "validation": "Au moins un pilote doit être sélectionné"
+ },
+ "SelectedDrivers": {
+ "label": "Pilotes sélectionnés"
+ },
+ "availabilityDate": "Rendre disponible dans Windows Update",
+ "bladeTitle": "Mises à jour du pilote Windows 10 et versions ultérieures (préversion)",
+ "lastSync": "Dernière synchronisation :",
+ "lastSyncDefaultText": "Collection d’inventaire initiale en attente",
+ "loadError": "Échec du chargement!"
+ },
+ "DriverStatus": {
+ "approved": "Approuvé",
+ "declined": "Refusé",
+ "export": "Exportation des pilotes recommandés",
+ "needsReview": "Révision nécessaire",
+ "paused": "En pause"
+ },
+ "DriversToReview": {
+ "text": "{0} pour évaluer"
+ },
+ "Subtitle": {
+ "automatic": "Stratégie de mise à jour du pilote d’approbation automatique",
+ "manual": "Stratégie de mise à jour du pilote d’approbation manuel"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Recommandé",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahreïn",
- "countryNameZA": "Afrique du Sud",
- "countryNameJO": "Jordanie",
- "countryNameSD": "Soudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "République tchèque",
- "countryNameLT": "Lituanie",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Équateur",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Ouganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hong Kong (R.A.S.)",
- "countryNameGH": "Ghana",
- "countryNameSA": "Arabie saoudite",
- "countryNamePG": "Papouasie-Nouvelle-Guinée",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "Inde",
- "countryNameHN": "Honduras",
- "countryNameRO": "Roumanie",
- "countryNameKZ": "Kazakhstan",
- "countryNameLC": "Sainte-Lucie",
- "countryNameGE": "Géorgie",
- "countryNameTT": "Trinité-et-Tobago",
- "countryNameMP": "Îles Mariannes du Nord",
- "countryNameMV": "Maldives",
- "countryNameFI": "Finlande",
- "countryNameNO": "Norvège",
- "countryNameEE": "Estonie",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Ouzbékistan",
- "countryNameME": "Monténégro",
- "countryNameTJ": "Tadjikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "France",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italie",
- "countryNameAZ": "Azerbaïdjan",
- "countryNameKG": "Kirghizistan",
- "countryNameWF": "Wallis-et-Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Îles Malouines",
- "countryNameGY": "Guyana",
- "countryNameSS": "Soudan du Sud",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haïti",
- "countryNameSY": "Syrie",
- "countryNameMD": "Moldova",
- "countryNameVC": "Saint-Vincent-et-les-Grenadines",
- "countryNameID": "Indonésie",
- "countryNameRE": "Réunion",
- "countryNameER": "Érythrée",
- "countryNameMK": "Macédoine du Nord",
- "countryNameTG": "Togo",
- "countryNamePF": "Polynésie française",
- "countryNameKY": "Caïmans (Îles)",
- "countryNameIO": "Territoire britannique de l'océan Indien",
- "countryNameRU": "Russie",
- "countryNameMA": "Maroc",
- "countryNameAU": "Australie",
- "countryNameBO": "Bolivie",
- "countryNameVA": "Saint-Siège (État de la Cité du Vatican)",
- "countryNameVG": "Îles Vierges britanniques",
- "countryNameFM": "Micronésie",
- "countryNameAQ": "Antarctique",
- "countryNameZM": "Zambie",
- "countryNameBR": "Brésil",
- "countryNameIS": "Islande",
- "countryNamePE": "Pérou",
- "countryNameBG": "Bulgarie",
- "countryNamePR": "Porto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamas, Les",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macao (R.A.S.)",
- "countryNameRW": "Rwanda",
- "countryNameAS": "Samoa américaines",
- "countryNameBQ": "Bonaire, Saint-Eustache et Saba",
- "countryNameMF": "Saint-Martin",
- "countryNameTM": "Turkménistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "Nouvelle-Calédonie",
- "countryNameAC": "Île de l'Ascension",
- "countryNameBN": "Brunéi Darussalam",
- "countryNameBD": "Bangladesh",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambie",
- "countryNameGA": "Gabon",
- "countryNameCA": "Canada",
- "countryNameSH": "Sainte-Hélène",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolie",
- "countryNamePA": "Panama",
- "countryNameCM": "Cameroun",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japon",
- "countryNameCY": "Chypre",
- "countryNameCD": "Congo (République démocratique du)",
- "countryNameTN": "Tunisie",
- "countryNameTR": "Turquie",
- "countryNameWS": "Samoa",
- "countryNameSE": "Suède",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Cambodge",
- "countryNamePL": "Pologne",
- "countryNameDZ": "Algérie",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalie",
- "countryNameDM": "Dominique",
- "countryNameEG": "Égypte",
- "countryNameGF": "Guyane française",
- "countryNameNZ": "Nouvelle-Zélande",
- "countryNamePS": "Autorité palestinienne",
- "countryNameIL": "Israël",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Grèce",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauritanie",
- "countryNameVI": "Îles Vierges américaines",
- "countryNameGQ": "Guinée équatoriale",
- "countryNameMX": "Mexique",
- "countryNameDJ": "Djibouti",
- "countryNameGN": "Guinée",
- "countryNameCN": "Chine",
- "countryNameMZ": "Mozambique",
- "countryNameBV": "Île Bouvet",
- "countryNameNF": "Île Norfolk",
- "countryNameTZ": "Tanzanie",
- "countryNameAI": "Anguilla",
- "countryNameGS": "Géorgie du Sud-et-les Îles Sandwich du Sud",
- "countryNameRS": "Serbie",
- "countryNameCC": "Îles Cocos (Keeling)",
- "countryNameNA": "Namibie",
- "countryNameDE": "Allemagne",
- "countryNameCG": "Congo (République démocratique du)",
- "countryNameKW": "Koweït",
- "countryNameMH": "Marshall (îles)",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Bélarus",
- "countryNameMY": "Malaisie",
- "countryNameST": "São Tomé et Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Tchad",
- "countryNameCX": "Île Christmas",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinée-Bissau",
- "countryNameUA": "Ukraine",
- "countryNameCU": "Cuba",
- "countryNameCO": "Colombie",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Croatie",
- "countryNameSC": "Seychelles",
- "countryNameNL": "Pays-Bas",
- "countryNameUM": "Îles mineures éloignées des États-Unis",
- "countryNameIM": "Île de Man",
- "countryNameFJ": "Fidji",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "Saint-Marin",
- "countryNameLA": "Laos",
- "countryNameGB": "Royaume-Uni",
- "countryNameBB": "Barbade",
- "countryNameSI": "Slovénie",
- "countryNameAM": "Arménie",
- "countryNameAR": "Argentine",
- "countryNamePM": "Saint-Pierre-et-Miquelon",
- "countryNameTF": "Terres australes et antarctiques françaises",
- "countryNameDO": "République dominicaine",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugal",
- "countryNameCF": "République centrafricaine",
- "countryNameBE": "Belgique",
- "countryNameKM": "Comores",
- "countryNameLY": "Libye",
- "countryNameIE": "Irlande",
- "countryNameKP": "Corée du Nord",
- "countryNameGG": "Guernesey",
- "countryNameSK": "Slovaquie",
- "countryNameTC": "Turques-et-Caïques (îles)",
- "countryNameNP": "Népal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Yémen",
- "countryNameBA": "Bosnie-Herzégovine",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chili",
- "countryNameIQ": "Irak",
- "countryNameSJ": "Svalbard et Jan Mayen",
- "countryNameAX": "Îles d'Åland",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermudes",
- "countryNameFO": "Féroé (îles)",
- "countryNameBL": "Saint-Barthélemy",
- "countryNameLB": "Liban",
- "countryNameJM": "Jamaïque",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Espagne",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapour",
- "countryNameAL": "Albanie",
- "countryNameSN": "Sénégal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d’Ivoire",
- "countryNameTW": "Taïwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cook (îles)",
- "countryNameTH": "Thaïlande",
- "countryNameHM": "Îles Heard-et-MacDonald",
- "countryNameGD": "Grenade",
- "countryNameUS": "États-Unis",
- "countryNameAT": "Autriche",
- "countryNameKR": "Corée, République de",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Danemark",
- "countryNameSV": "Salvador",
- "countryNamePW": "Palaos",
- "countryNameET": "Éthiopie",
- "countryNameMG": "Madagascar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxembourg",
- "countryNameQA": "Qatar",
- "countryNameBT": "Bhoutan",
- "countryNameSB": "Salomon (îles)",
- "countryNameAE": "Émirats arabes unis",
- "countryNameAD": "Andorre",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua-et-Barbuda",
- "countryNameMU": "Maurice",
- "countryNameHU": "Hongrie",
- "countryNameSX": "Saint-Martin (partie néerlandaise) ",
- "countryNameCH": "Suisse",
- "countryNamePN": "Îles Pitcairn",
- "countryNameGL": "Groenland",
- "countryNamePH": "Philippines",
- "countryNameMT": "Malte",
- "countryNameKN": "Saint-Christophe-et-Niévès",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Bénin",
- "countryNameLV": "Lettonie",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "Synchronisation impossible{0}",
+ "failureDescription": "Nous avons rencontré une erreur et n’avons pas pu effectuer la synchronisation demandée. Veuillez réessayer.",
+ "pending": "{0} Synchronisation en cours",
+ "pendingDescription": "Nous récupérons les données les plus récentes. Ce processus peut prendre plusieurs minutes.",
+ "success": "{0}Synchronisation terminée",
+ "successDescription": "Synchronisation avec le service WUfB terminée à {0}"
+ },
+ "SyncSpinner": {
+ "text": "Une synchronisation est en cours. Cela peut prendre plusieurs minutes. Recherchez une alerte ou réexaminez-la dans quelques minutes."
+ },
+ "TabName": {
+ "basics": "Informations de base",
+ "driverUpdateSettings": "Paramètres",
+ "otherDrivers": "Autres pilotes",
+ "properties": "Propriétés",
+ "recommendedDrivers": "Pilotes recommandés"
+ },
+ "driverAddFilter": "Ajouter un filtre",
+ "driverApplicableDevices": "Appareils applicables",
+ "driverApprovalStatus": "État",
+ "driverBulkActions": "Actions en bloc",
+ "driverClass": "Classe de pilote",
+ "driverCount": "Affichage de {0} à {1} enregistrements sur {2}",
+ "driverFilterNoneSelected": "Aucun utilisateur sélectionné",
+ "driverManufacturer": "Fabricant",
+ "driverName": "Nom du pilote",
+ "driverNameLower": "déploiement de la mise à jour des pilotes Windows",
+ "driverNameUpper": "Déploiement de la mise à jour des pilotes Windows",
+ "driverRefresh": "Actualiser",
+ "driverReleaseDate": "Date de sortie",
+ "driverSearch": "Rechercher",
+ "driverSearchKeyword": "Entrer un mot clé de recherche",
+ "driverVersion": "Version",
+ "firstDeploymentDate": "Premier déploiement",
+ "infoBoxText": "Le remplissage de l’inventaire peut prendre jusqu’à 24 heures après l’affectation et la création d’une stratégie.",
+ "textBlockText": "Sélectionnez les paramètres d'approbation et de déploiement de votre politique. Choisissez de configurer une politique pour approuver et déployer les mises à jour automatiquement ou manuellement. La méthode d'approbation ne peut pas être modifiée une fois qu'une politique est créée, mais les modifications des approbations et des détails de déploiement des pilotes individuels seront possibles une fois qu'un inventaire sera construit pour les périphériques affectés."
+ },
+ "TACSettings": {
+ "edgeSettings": "Paramètres de configuration Edge",
+ "edgeWindowsDataProtectionSettings": "Paramètres de protection des données Microsoft Edge (Windows) - Préversion",
+ "edgeWindowsSettings": "Paramètres de configuration Microsoft Edge (Windows) - Préversion",
+ "generalAppConfig": "Configuration générale de l'application",
+ "generalSettings": "Paramètres de configuration généraux",
+ "outlookSMIMEConfig": "Paramètres S/MIME Outlook",
+ "outlookSettings": "Paramètres de configuration Outlook",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-hu.json b/Documentation/Strings-hu.json
index 475f7dd..f5b0675 100644
--- a/Documentation/Strings-hu.json
+++ b/Documentation/Strings-hu.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Adatvédelmi konfiguráció"
- },
- "OrganizeMailByThread": {
- "title": "Levelezés rendezése szálak szerint",
- "tooltip": "Az Outlook alapértelmezett viselkedése, hogy a levelezés beszélgetéseit szálak szerint csoportosított beszélgetési nézetbe rendezi. Ha ez a beállítás le van tiltva, az Outlook minden üzenetet külön jelenít meg, és nem csoportosítja őket szálak szerint."
- },
- "Sync": {
- "header": "Kapcsolattartási mezők szinkronizálása natív ügyfelek alkalmazáskonfigurációjával"
- },
- "allowBiometricsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
- "allowBiometricsTitle": "Az alkalmazás eléréséhez biometria szükséges",
- "allowBiometricsTooltip": "Megkövetelheti a biometria, például TouchID vagy a FaceID használatát azoktól a felhasználóktól, akik szeretnék elérni az alkalmazást az eszközükön. Ha kötelező a használata, a felhasználóknak az ebben a profilban kiválasztott hitelesítési módszer mellett a biometriát is használniuk kell. Ezt a beállítást nem ajánlott engedélyezni, ha Intune App Protection-szabályzatok vannak érvénybe léptetve, mert az alkalmazásvédelmi szabályzat olyan hozzáférési követelményeket tartalmaz, amelyeknek a felügyelt adatok elérése előtt kell megfelelni. Ha mindkét funkció engedélyezve van, az Outlook Mobile elérésekor több hozzáférés-jóváhagyási panel jelenhet meg. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
- "allowCalendarNotificationsTitle": "Naptárértesítések",
- "allowCalendarNotificationsTooltip": "Az összes részlet megjelenítésének engedélyezése a naptárbeli értesítésekben, amikor az Alkalmazásvédelmi szabályzat „Szervezeti adatok értesítései” beállításának értéke „Céges adatok letiltása”.",
- "allowDefaultAppSignatureTitle": "Alapértelmezett alkalmazás-aláírás",
- "allowDefaultAppSignatureTooltip": "Az alapértelmezett alkalmazás-aláírás azt jelzi, hogy az alkalmazás „Az iOS Outlook letöltése” aláírást alapértelmezett aláírásként fogja-e használni üzenetek írásakor. Ha le van tiltva a beállítás, az alkalmazás nem fogja használni az alapértelmezett aláírást, a felhasználók azonban hozzáadhatják saját aláírásukat.",
- "allowExternalRecipientsMailTipTitle": "Külső címzettek e-mail-tipp",
- "allowExternalRecipientsMailTipTooltip": "A Külső címzettek e-mail-tipp akkor jelenik meg, ha a feladó külső címzettet vagy külső címzetteket tartalmazó terjesztési csoportot ad hozzá az e-mailhez. Ez az e-mail-tipp arról tájékoztatja a feladót, hogy az adott e-mail elhagyja-e a céget. Ez megkönnyíti a szóhasználattal, a hangnemmel és a tartalommal kapcsolatos helyes döntések meghozatalát. Ez a funkció csak az Exchange Online-fiókok és a modern hibrid hitelesítést használó helyi fiókok számára érhető el. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Bekapcsolva.",
- "allowFocusedInboxTitle": "Szűrt levelek",
- "allowFocusedInboxTooltip": "A Szűrt levelek funkció két lapra választja szét beérkezett üzenetek mappáját – a Szűrt és az Egyéb lapra. A legfontosabb e-mailek a Szűrt lapon jelennek meg, míg a többi rejtve marad, de könnyen elérhető az Egyéb lapon. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Bekapcsolva.",
- "allowMailNotificationsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
- "allowMailNotificationsTitle": "Értesítések e-mailben",
- "allowMailNotificationsTooltip": "Ez az érték határozza meg az Outlook engedélyezi-e az e-mail-értesítéseket. A Nem érték megadásával letiltja az e-mail-értesítéseket.",
- "allowOrgDataOnWearablesTitle": "Szervezeti adatok a hordható eszközökön",
- "allowOrgDataOnWearablesTooltip": "Ez az érték határozza meg, hogy az Outlook-adatok szinkronizálhatók-e hordható eszközre. A Nem érték megadásával letiltja a hordható eszközre való szinkronizálást.",
- "allowSaveContactsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a kapcsolattartó-szinkronizálási beállítást.",
- "allowSaveContactsTitle": "Partnerek mentése",
- "allowSaveContactsTooltip": "A névjegyek mobileszközön lévő natív címjegyzékbe történő mentése lehetővé teszi az új hívások és SMS-ek összekapcsolását a felhasználó meglévő Outlook-névjegyeivel. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
- "allowSmartReplyTitle": "Javasolt válaszok",
- "allowSmartReplyTooltip": "Ha megnyit egy üzenetet, az Outlook az üzenet alatt válaszokat javasolhat. Ha kiválaszt egy javasolt választ, a küldés előtt szerkesztheti a választ. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
- "allowUserChangeGeneralToolTip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
- "allowUserChangeTitle": "A felhasználó módosíthatja a beállításokat",
- "blockExternalImagesAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
- "blockExternalImagesTitle": "Külső képek letiltása",
- "blockExternalImagesTooltip": "Ha engedélyezve van a külső képek letiltása, az alkalmazás megakadályozza azoknak az interneten tárolt képeknek a letöltését, amelyek az üzenettörzsbe vannak beágyazva. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
- "disableAddinsTitle": "Bővítmények engedélyezése",
- "disableAddinsTooltip": "Alapértelmezés szerint az alkalmazásvédelmi házirend lehetővé teszi a felhasználók számára harmadik felektől származó bővítmények használatát, de lehetőség van a bővítmények letiltására is az „A házirend által felügyelt alkalmazások adatainak szinkronizálása a natív alkalmazásokkal“ beállítás segítségével. Ennek a beállításnak a Kikapcsolva értékre állítása letiltja a bővítmények használatát, ha az Alkalmazásvédelmi házirend Engedélyezve értékre van állítva.",
- "discoverFeedTitle": "Felfedezési hírcsatorna",
- "discoverFeedTooltip": "A felfedezési hírcsatorna elérhetővé teszi a leggyakrabban használt Office-fájlokat. Alapértelmezés szerint ez a hírcsatorna engedélyezve van, ha a Delve használata engedélyezve van a felhasználó számára. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezés szerint be van kapcsolva.",
- "enableSMIMETitle": "S/MIME engedélyezése",
- "enableSMIMETooltip": "Megadja, hogy engedélyezve vannak-e az S/MIME-vezérlők e-mail írásakor.",
- "encryptAllEmails": "Az összes e-mail titkosítása",
- "encryptAllEmailsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthatja-e az Összes e-mail titkosítása beállítást.",
- "encryptAllEmailsTooltip": "Adja meg, hogy az összes e-mailt titkosítani kell-e vagy sem. A titkosítás egy rejtjelező szöveggel konvertálja az adatokat úgy, hogy csak a címzett tudja elolvasni.",
- "ldapUrl": "LDAP URL-cím",
- "ldapUrlTooltip": "Ez az az LDAP-állomásnév, ahonnan az ügyfelek megkapják az e-mail-címzettek nyilvános titkosítási kulcsait. Az e-mailek titkosítva lesznek, ha rendelkezésre áll egy kulcs. Támogatott formátumok: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
- "nativeCalendarSyncMAMOnlyTitle": "Naptár szinkronizálásának engedélyezése",
- "nativeCalendarSyncMAMOnlyTooltip": "Az alkalmazásvédelmi házirend alapértelmezés szerint lehetővé teszi a naptár szinkronizálását a natív Naptár alkalmazásban, de használható a naptárszinkronizálás elérhetőségének blokkolására is. Ez a beállítás független az alkalmazásvédelmi házirend beállításától, és lehetővé teszi a szervezetek számára annak meghatározását, hogy elérhető legyen-e a naptár szinkronizálása a munkahelyi vagy iskolai fiók számára.",
- "nativeCalendarSyncTitle": "Naptárak szinkronizálása",
- "nativeCalendarSyncTooltip": "Alapértelmezés szerint az alkalmazásvédelmi házirend lehetővé teszi a naptár szinkronizálását a natív Naptár alkalmazással, de lehetőség van a naptár szinkronizálásának letiltására is az „A házirend által felügyelt alkalmazások adatainak szinkronizálása a natív alkalmazásokkal“ beállítás segítségével. Ennek a beállításnak a Kikapcsolva értékre állítása letiltja a naptár szinkronizálását, ha az Alkalmazásvédelmi házirend Engedélyezve értékre van állítva.",
- "playMyEmailsTitle": "Saját e-mailek lejátszása",
- "playMyEmailsTooltip": "A saját e-mailek lejátszása funkció alapértelmezés szerint nincs engedélyezve az alkalmazásban, de a Beérkezett üzenetek mappában egy transzparensen felajánlható a jogosult felhasználóknak. Ha ez a beállítás ki van kapcsolva, a funkció nem lesz felajánlva a jogosult felhasználóknak az alkalmazásban. A felhasználók dönthetnek úgy, hogy manuálisan engedélyezik a saját e-mailek lejátszását az alkalmazásból, még akkor is, ha ez a funkció ki van kapcsolva. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezés szerint be van kapcsolva, és a funkció fel lesz ajánlva a jogosult felhasználóknak.",
- "signAllEmails": "Az összes e-mail aláírása",
- "signAllEmailsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthatja-e az Összes e-mail aláírása beállítást.",
- "signAllEmailsTooltip": "Adja meg, hogy az összes e-mailt alá kell-e írni vagy sem. Digitális aláírás használatával ellenőrizhető az e-mail hitelessége, és biztosítható, hogy a tartalmát nem módosítják illetéktelenül átvitel közben.",
- "syncAddressTitle": "Cím",
- "syncAddressTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő címet a natív névjegyekkel.",
- "syncBirthdayTitle": "Születésnap",
- "syncBirthdayTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő születésnapot a natív névjegyekkel.",
- "syncCompanyTitle": "Cég",
- "syncCompanyTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő cégnevet a natív névjegyekkel.",
- "syncDepartmentTitle": "Részleg",
- "syncDepartmentTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő részleget a natív névjegyekkel.",
- "syncEmailAddressTitle": "E-mail cím",
- "syncEmailAddressTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő e-mail-címet a natív névjegyekkel.",
- "syncInstantMessagingAddressTitle": "Azonnal üzenetkezelési cím",
- "syncInstantMessagingAddressTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő csevegési címet a natív névjegyekkel.",
- "syncJobTitleTitle": "Beosztás",
- "syncJobTitleTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő beosztást a natív névjegyekkel.",
- "syncNicknameTitle": "Becenév.",
- "syncNicknameTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő becenevet a natív névjegyekkel.",
- "syncNotesTitle": "Megjegyzések",
- "syncNotesTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő megjegyzéseket a natív névjegyekkel.",
- "syncPhoneHomeFaxNumberTitle": "Telefon otthoni faxszáma",
- "syncPhoneHomeFaxNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő otthoni faxszámot a natív névjegyekkel.",
- "syncPhoneHomeNumberTitle": "Otthoni telefonszám",
- "syncPhoneHomeNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő otthoni telefonszámot a natív névjegyekkel.",
- "syncPhoneMobileNumberTitle": "Mobiltelefonszám",
- "syncPhoneMobileNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő mobiltelefonszámot a natív névjegyekkel.",
- "syncPhoneOtherNumberTitle": "Egyéb telefonszám",
- "syncPhoneOtherNumberTooltip": "Ez az érték meghatározza, hogy szinkronizálja-e névjegyen szereplő egyéb telefonszámot a natív névjegyekkel.",
- "syncPhonePagerNumberTitle": "Személyhívó telefonszáma",
- "syncPhonePagerNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő személyhívószámot a natív névjegyekkel.",
- "syncPhoneWorkFaxNumberTitle": "Munkahelyi telefon faxszáma",
- "syncPhoneWorkFaxNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő munkahelyi faxszámot a natív névjegyekkel.",
- "syncPhoneWorkNumberTitle": "Munkahelyi telefonszám",
- "syncPhoneWorkNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a munkahelyi telefonszámot a natív névjegyekkel.",
- "syncPrefixTitle": "Név előtagja",
- "syncPrefixTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő név előtagját a natív névjegyekkel.",
- "syncSuffixTitle": "Név utótagja",
- "syncSuffixTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő név utótagját a natív névjegyekkel.",
- "textPredictionsTitle": "Prediktív szövegbevitelek",
- "textPredictionsTooltip": "Az Outlook az üzenetek írása közben javasolhat szavakat és kifejezéseket. Ha az Outlook javasol valamit, pöccintéssel elfogadhatja. Ha a beállítás nincs konfigurálva, alapértelmezett esetben be van kapcsolva az alkalmazásban.",
- "themesEnabledTitle": "Témák engedélyezve",
- "themesEnabledTooltip": "Adja meg, hogy a felhasználó használhat-e egyéni vizuális témát."
- },
- "Languages": {
- "ar-aE": "arab (E.A.E.)",
- "ar-bH": "arab (Bahrein)",
- "ar-dZ": "arab (Algéria)",
- "ar-eG": "arab (Egyiptom)",
- "ar-iQ": "arab (Irak)",
- "ar-jO": "arab (Jordánia)",
- "ar-kW": "arab (Kuvait)",
- "ar-lB": "arab (Libanon)",
- "ar-lY": "arab (Líbia)",
- "ar-mA": "arab (Marokkó)",
- "ar-oM": "arab (Omán)",
- "ar-qA": "arab (Katar)",
- "ar-sA": "arab (Szaúd-Arábia)",
- "ar-sY": "arab (Szíria)",
- "ar-tN": "arab (Tunézia)",
- "ar-yE": "arab (Jemen)",
- "az-cyrl": "azerbajdzsáni (cirill betűs, Azerbajdzsán)",
- "az-latn": "azerbajdzsáni (latin betűs, Azerbajdzsán)",
- "bn-bD": "bangla (Banglades)",
- "bn-iN": "bangla (India)",
- "bs-cyrl": "bosnyák (cirill betűs)",
- "bs-latn": "bosnyák (latin betűs)",
- "zh-cN": "kínai (kínai népköztársasági)",
- "zh-hK": "kínai (hongkongi k.k.t.)",
- "zh-mO": "kínai (Makaó KKT)",
- "zh-sG": "kínai (Szingapúr)",
- "zh-tW": "kínai (tajvani)",
- "hr-bA": "horvát (latin betűs)",
- "hr-hR": "horvát (Horvátország)",
- "nl-bE": "holland (Belgium)",
- "nl-nL": "holland (Hollandia)",
- "en-aU": "angol (Ausztrália)",
- "en-bZ": "angol (Belize)",
- "en-cA": "angol (Kanada)",
- "en-cabn": "angol (Karib-térség)",
- "en-iE": "angol (Írország)",
- "en-iN": "angol (India)",
- "en-jM": "angol (Jamaica)",
- "en-mY": "angol (Malajzia)",
- "en-nZ": "angol (Új-Zéland)",
- "en-pH": "angol (Fülöp-szigeteki)",
- "en-sG": "angol (Szingapúr)",
- "en-tT": "angol (Trinidad és Tobago)",
- "en-uK": "angol (Egyesült Királyság)",
- "en-uS": "angol (Egyesült Államok)",
- "en-zA": "angol (Dél-Afrika)",
- "en-zW": "angol (Zimbabwe)",
- "fr-bE": "francia (Belgium)",
- "fr-cA": "francia (Kanada)",
- "fr-cH": "francia (Svájc)",
- "fr-fR": "francia (Franciaország)",
- "fr-lU": "francia (Luxemburg)",
- "fr-mC": "francia (Monaco)",
- "de-aT": "német (Ausztria)",
- "de-cH": "német (Svájc)",
- "de-dE": "német (Németország)",
- "de-lI": "német (Liechtenstein)",
- "de-lU": "német (Luxemburg)",
- "iu-cans": "inuktitut (szótagírás, Kanada)",
- "iu-latn": "inuktitut (latin betűs, Kanada)",
- "it-cH": "olasz (Svájc)",
- "it-iT": "olasz (Olaszország)",
- "ms-bN": "maláj (Brunei Szultanátus)",
- "ms-mY": "maláj (Malajzia)",
- "mn-cN": "mongol (hagyományos mongol, kínai népköztársasági)",
- "mn-mN": "mongol (cirill betűs, Mongólia)",
- "no-nB": "norvég, bokmål (Norvégia)",
- "no-nn": "norvég, nynorsk (Norvégia)",
- "pt-bR": "Portugál (brazíliai)",
- "pt-pT": "Portugál (portugáliai)",
- "quz-bO": "kecsua (Bolívia)",
- "quz-eC": "kecsua (Ecuador)",
- "quz-pE": "kecsua (Peru)",
- "smj-nO": "számi, lulei (Norvégia)",
- "smj-sE": "számi, lulei (Svédország)",
- "se-fI": "számi, északi (Finnország)",
- "se-nO": "számi, északi (Norvégia)",
- "se-sE": "számi, északi (Svédország)",
- "sma-nO": "számi, déli (Norvégia)",
- "sma-sE": "számi, déli (Svédország)",
- "smn": "számi, inari (Finnország)",
- "sms": "számi, kolta (Finnország)",
- "sr-Cyrl-bA": "szerb (cirill betűs)",
- "sr-Cyrl-rS": "szerb (cirill betűs, [a volt] Szerbia és Montenegró)",
- "sr-Latn-bA": "szerb (latin betűs)",
- "sr-Latn-rS": "szerb (latin, Szerbia)",
- "dsb": "alsó-szorb (Németország)",
- "hsb": "felső-szorb (Németország)",
- "es-es-tradnl": "spanyol (Spanyolország, hagyományos rendezés)",
- "es-aR": "spanyol (Argentína)",
- "es-bO": "spanyol (Bolívia)",
- "es-cL": "spanyol (Chile)",
- "es-cO": "spanyol (Kolumbia)",
- "es-cR": "spanyol (Costa Rica)",
- "es-dO": "spanyol (Dominikai Köztársaság)",
- "es-eC": "spanyol (Ecuador)",
- "es-eS": "spanyol (spanyolországi)",
- "es-gT": "spanyol (Guatemala)",
- "es-hN": "spanyol (Honduras)",
- "es-mX": "spanyol (Mexikó)",
- "es-nI": "spanyol (Nicaragua)",
- "es-pA": "spanyol (Panama)",
- "es-pE": "spanyol (Peru)",
- "es-pR": "spanyol (Puerto Rico)",
- "es-pY": "spanyol (Paraguay)",
- "es-sV": "spanyol (Salvador)",
- "es-uS": "spanyol (Egyesült Államok)",
- "es-uY": "spanyol (Uruguay)",
- "es-vE": "spanyol (Venezuela)",
- "sv-fI": "svéd (Finnország)",
- "uz-cyrl": "üzbég (cirill betűs, Üzbegisztán)",
- "uz-latn": "üzbég (latin betűs, Üzbegisztán)",
- "af": "afrikaans (Dél-Afrika)",
- "sq": "albán (Albánia)",
- "am": "amhara (Etiópia)",
- "hy": "örmény (Örményország)",
- "as": "asszámi (India)",
- "ba": "baskír (Oroszország)",
- "eu": "baszk (baszk)",
- "be": "belarusz (Belarusz)",
- "br": "breton (Franciaország)",
- "bg": "bolgár (Bulgária)",
- "ca": "katalán (katalán)",
- "co": "korzikai (Franciaország)",
- "cs": "cseh (Cseh Köztársaság)",
- "da": "dán (Dánia)",
- "dv": "divehi (Maldív-szigetek)",
- "et": "észt (Észtország)",
- "fo": "feröeri (Feröer-szigetek)",
- "fil": "filippínó (Fülöp-szigetek)",
- "fi": "finn (Finnország)",
- "gl": "gallego (Galícia)",
- "ka": "grúz (Grúzia)",
- "el": "görög (Görögország)",
- "gu": "gudzsaráti (India)",
- "ha": "hausza (latin betűs, Nigéria)",
- "he": "héber (Izrael)",
- "hi": "hindi (India)",
- "hu": "magyar (Magyarország)",
- "is": "izlandi (Izland)",
- "ig": "igbo (Nigéria)",
- "id": "indonéz (Indonézia)",
- "ga": "ír (Írország)",
- "xh": "xhosza (Dél-Afrika)",
- "zu": "zulu (Dél-Afrika)",
- "ja": "japán (Japán)",
- "kn": "kannada (India)",
- "kk": "kazak (Kazahsztán)",
- "km": "khmer (Kambodzsa)",
- "rw": "kinyarvanda (Ruanda)",
- "sw": "szuahéli (Kenya)",
- "kok": "kónkáni (India)",
- "ko": "koreai (Korea)",
- "ky": "kirgiz (Kirgizisztán)",
- "lo": "lao (laoszi)",
- "lv": "lett (Lettország)",
- "lt": "litván (Litvánia)",
- "lb": "luxemburgi (Luxemburg)",
- "mk": "Macedón (Észak-Macedónia)",
- "ml": "malajálam (India)",
- "mt": "máltai (Málta)",
- "mi": "maori (Új-Zéland)",
- "mr": "maráthi (India)",
- "moh": "mohawk (Mohawk)",
- "ne": "nepáli (Nepál)",
- "oc": "okszitán (Franciaország)",
- "or": "odia (India)",
- "ps": "pasto (Afganisztán)",
- "fa": "perzsa",
- "pl": "lengyel (Lengyelország)",
- "pa": "pandzsábi (India)",
- "ro": "román (Románia)",
- "rm": "rétoromán (Svájc)",
- "ru": "orosz (Oroszország)",
- "sa": "szanszkrit (India)",
- "st": "északi szoto (Dél-Afrika)",
- "tn": "setswana (Dél-Afrika)",
- "si": "szingaléz (Srí Lanka)",
- "sk": "szlovák (Szlovákia)",
- "sl": "szlovén (Szlovénia)",
- "sv": "svéd (Svédország)",
- "syr": "szír (Szíria)",
- "tg": "tadzsik (cirill betűs, Tádzsikisztán)",
- "ta": "tamil (India)",
- "tt": "tatár (Oroszország)",
- "te": "telugu (India)",
- "th": "thai (Thaiföld)",
- "bo": "tibeti (kínai népköztársasági)",
- "tr": "török (Törökország)",
- "tk": "türkmén (Türkmenisztán)",
- "uk": "ukrán (Ukrajna)",
- "ur": "urdu (pakisztáni iszlám köztársasági)",
- "vi": "vietnami (Vietnam)",
- "cy": "walesi (Egyesült Királyság)",
- "wo": "volof (Szenegál)",
- "ii": "ji (kínai népköztársasági)",
- "yo": "joruba (Nigéria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender for Endpoint",
- "androidDeviceOwnerApplications": "Alkalmazások",
- "androidDeviceOwnerPolicyMessages": "Egyéni támogatási információk",
- "androidForWorkPassword": "Eszköz jelszava",
- "appManagement": "Alkalmazások engedélyezése vagy letiltása",
- "applicationGuard": "Microsoft Defender alkalmazásőr",
- "applicationRestrictions": "Korlátozott alkalmazások",
- "applicationVisibility": "Alkalmazások megjelenítése vagy elrejtése",
- "applications": "Alkalmazásáruház",
- "applicationsAndGames": "App Store, dokumentumok megtekintése, játékok",
- "applicationsAndGoogle": "Google Play Áruház",
- "appsAndExperience": "Alkalmazások és kezelőfelület",
- "associatedDomains": "Társított tartományok",
- "autonomousSingleAppMode": "Autonóm egyalkalmazásos mód",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Windowsos titkosítás",
- "bootOptions": "Rendszerindítási lehetőségek",
- "browser": "Böngésző",
- "builtinApps": "Beépített alkalmazások",
- "cameras": "Kamerák",
- "cellular": "Mobiltelefon",
- "cloudAndStorage": "Felhő és tárolás",
- "cloudPrint": "Felhőbeli nyomtató",
- "complianceEmailProfile": "E-mail",
- "connectedDevices": "Csatlakoztatott eszközök",
- "connectivity": "Mobiltelefon és kapcsolatok",
- "contentCaching": "Tartalom-gyorsítótárazás",
- "controlPanelAndSettings": "Vezérlőpult és Gépház",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Egyéni megfelelőség",
- "customConfiguration": "Egyéni konfigurációs profil",
- "customOMASettings": "Egyéni OMA-URI beállítások",
- "customPreferences": "Preferenciafájl",
- "dFCISecuritySettings": "Biztonsági beállítások",
- "defender": "Microsoft Defender víruskereső",
- "defenderAntivirus": "Microsoft Defender víruskereső",
- "defenderExploitGuard": "Microsoft Defender - biztonsági rés kiaknázása elleni védelem",
- "defenderFirewall": "Windows tűzfal",
- "defenderLocalSecurityOptions": "Helyi eszközbiztonsági beállítások",
- "defenderSecurityCenter": "Microsoft Defender biztonsági központ",
- "deliveryOptimization": "Kézbesítésoptimalizálás",
- "derivedCredentialAuthenticationConfiguration": "Származtatott hitelesítő adat",
- "deviceExperience": "Eszköz által nyújtott élmény",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Microsoft Defender alkalmazás-ellenőrzés",
- "deviceHealth": "Eszközállapot-figyelő",
- "devicePassword": "Eszközjelszó",
- "deviceProperties": "Eszköztulajdonságok",
- "deviceRestrictions": "Általános",
- "deviceSecurity": "Rendszerbiztonság",
- "display": "Megjelenítés",
- "domainJoin": "Csatlakozás tartományhoz",
- "domains": "Tartományok",
- "edgeBrowser": "Microsoft Edge Legacy (45-ös és korábbi verziók)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge kioszkmód",
- "editionUpgrade": "Kiadásfrissítés",
- "education": "Oktatás",
- "educationDeviceCerts": "Eszköztanúsítványok",
- "educationStudentCerts": "Diáktanúsítványok",
- "educationTakeATest": "Vizsga",
- "educationTeacherCerts": "Oktatói tanúsítványok",
- "emailProfile": "E-mail",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Egyszeri bejelentkezéses alkalmazásbővítmény",
- "filevault": "FileVault",
- "firewall": "Tűzfal",
- "games": "Játékok",
- "gatekeeper": "Forgalomirányító",
- "healthMonitoring": "Állapotmonitorozás",
- "homeScreenLayout": "Kezdőképernyő-elrendezés",
- "iOSWallpaper": "Tapéta",
- "importedPFX": "Importált PKCS-tanúsítvány",
- "iosDefenderAtp": "Microsoft Defender for Endpoint",
- "iosKiosk": "Kioszkmód",
- "kernelExtensions": "Kernelbővítmények",
- "keyboardAndDictionary": "Billentyűzet és szótár",
- "kiosk": "Kioszkmód",
- "kioskAndroidEnterprise": "Dedikált eszközök",
- "kioskConfiguration": "Kioszkmód",
- "kioskConfigurationV2": "Kioszkmód",
- "kioskWebBrowser": "Kioszkmódú webböngésző",
- "lockScreenMessage": "Zárolási képernyőn látható üzenet",
- "lockedScreenExperience": "Zárolási képernyő felülete",
- "logging": "Jelentéskészítés és telemetria",
- "loginItems": "Bejelentkezési elemek",
- "loginWindow": "Bejelentkezési ablak",
- "macDefenderAtp": "Microsoft Defender for Endpoint",
- "maintenance": "Karbantartás",
- "malware": "Kártevők",
- "messaging": "Üzenetküldés",
- "microphonesAndSpeakers": "Mikrofonok és hangszórók",
- "networkBoundary": "Hálózathatár",
- "networkProxy": "Hálózati proxy",
- "notifications": "Alkalmazásértesítések",
- "pKCS": "PKCS-tanúsítvány",
- "password": "Jelszó",
- "personalProfile": "Személyes profil",
- "personalization": "Személyre szabás",
- "policyOverride": "Csoportházirend felülbírálása",
- "ports": "Portok",
- "powerSettings": "Energiaellátási beállítások",
- "printer": "Nyomtató",
- "privacy": "Adatvédelem",
- "privacyPerApp": "Alkalmazásonkénti adatvédelmi kivételek",
- "privacyPreferences": "Adatvédelmi beállítások",
- "projection": "Vetület",
- "radios": "Rádiófrekvenciás kapcsolatok",
- "sCCMCompliance": "Configuration Manager-megfelelőség",
- "sCEP": "SCEP-tanúsítvány",
- "sCEPProperties": "SCEP-tanúsítvány",
- "sMode": "Módváltás (csak Windows Insider)",
- "safari": "Safari",
- "search": "Keresés",
- "session": "Munkamenet",
- "sharedDevice": "Megosztott iPad",
- "sharedPCAccountManager": "Megosztott többfelhasználós eszköz",
- "singleSignOn": "Egyszeri bejelentkezés",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Beállítások",
- "start": "Indítás",
- "systemExtensions": "Rendszerbővítmények",
- "systemSecurity": "Rendszerbiztonság",
- "trustedCert": "Megbízható tanúsítvány",
- "uEFIAccess": "UEFI-hozzáférés",
- "updates": "Frissítések",
- "userRights": "Felhasználói jogok",
- "usersAndAccounts": "Felhasználók és fiókok",
- "vPN": "Alapszintű VPN",
- "vPNApps": "Automatikus VPN",
- "vPNAppsAndTrafficRules": "Alkalmazások és adatforgalmi szabályok",
- "vPNConditionalAccess": "Feltételes hozzáférés",
- "vPNConnectivity": "Hálózati kapcsolat",
- "vPNDNSTriggers": "DNS-beállítások",
- "vPNIKEv2": "IKEv2-beállítások",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Vegyes alagútkezelés",
- "vPNTrustedNetwork": "Megbízható hálózatok észlelése",
- "wakeSettings": "Ébresztési beállítások",
- "webContentFilter": "Webes tartalomszűrés",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender for Endpoint",
- "windowsDefenderATP": "Microsoft Defender for Endpoint",
- "windowsHelloForBusiness": "Vállalati Windows Hello",
- "windowsSpotlight": "Windows Reflektorfény",
- "wiredNetwork": "Vezetékes hálózat",
- "wireless": "Vezeték nélküli hálózat",
- "wirelessProjection": "Vezeték nélküli kivetítés",
- "workProfile": "Munkahelyi profil beállításai",
- "workProfilePassword": "Munkahelyi profil jelszava",
- "xboxServices": "Xbox-szolgáltatások",
- "zebraMx": "MX-profil (csak Zebra)",
- "complianceActionsLabel": "Műveletek meg nem felelés esetén"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Leírás"
- },
- "FeatureDeploymentSettings": {
- "header": "Funkciótelepítési beállítások"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "A funkció nem képes eszközök alacsonyabb verzióra váltására.",
- "label": "A telepíteni kívánt funkciófrissítés"
- },
- "GradualRolloutEndDate": {
- "label": "Végleges csoport rendelkezésre állása"
- },
- "GradualRolloutInterval": {
- "label": "Csoportok közötti napok"
- },
- "GradualRolloutStartDate": {
- "label": "Első csoport rendelkezésre állása"
- },
- "Name": {
- "label": "Név"
- },
- "OptionalUpdate": {
- "label": "Szükséges vagy választható frissítés"
- },
- "RolloutOptions": {
- "label": "Kibocsátási beállítások"
- },
- "RolloutSettings": {
- "header": "Mikor szeretné elérhetővé tenni a frissítést Windows Update-en belül?"
- },
- "ScopeSettings": {
- "header": "Hatókörcímkék konfigurálása ehhez a szabályzathoz."
- },
- "StartDateOnlyStartDate": {
- "label": "Az első elérhető dátum"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Letiltva",
- "enabled": "Engedélyezve",
- "infoBalloonContent": "Annak szabályozása, hogy a legújabb Windows 10 funkciófrissítés telepíthető-e a Windows 11-re nem jogosult eszközökre",
- "label": "Ha egy eszköz nem jogosult futtatni a Windows 11-et, telepítse a legújabb Windows 10 funkciófrissítést",
- "notApplicable": "Nem alkalmazható",
- "summaryLabel": "A Windows 10 telepítése olyan eszközökön, amelyek nem jogosultak a Windows 11 futtatására"
- },
- "bladeTitle": "Funkciófrissítés-telepítések",
- "deploymentSettingsTitle": "Üzembe helyezési beállítások",
- "loadError": "A betöltés nem sikerült",
- "windows11EULA": "Ha kiválasztja ezt a funkciófrissítést az üzembe helyezéshez, azzal elfogadja, hogy az operációs rendszer egy eszközre való alkalmazásakor vagy (1) a megfelelő Windows-licencet vásárolta meg a mennyiségi licencelés keretében, vagy (2), hogy Ön felhatalmazást kapott a munkahelye vagy az intézménye nevében való kötelezettségvállalásra, és mint ilyen személy, elfogadja az itt található megfelelő Microsoft szoftverlicenc-szerződés feltételeit: {0}."
- },
- "Notifications": {
- "deploymentSaved": "A(z) {0} mentése befejeződött.",
- "newFeatureUpdateDeploymentCreated": "Az új szolgáltatásfrissítési telepítés létrejött."
- },
- "TabName": {
- "deploymentSettings": "Üzembe helyezési beállítások",
- "groupAssignmentSettings": "Feladatok",
- "scopeSettings": "Hatókörcímkék"
- },
- "gradualRolloutLicenseWarning": "Ehhez a képességhez meghatározott licencre van szükség.",
- "gradualRolloutLicenseWarningEdit": "A képesség használata és konfigurálása addig lehetséges, amíg a szabályzat részét képezi annak mentésekor.",
- "licenseLearnMoreText": "További információ az előfeltételekről és a funkciófrissítési szabályzatokról.",
- "optionalUpdateWarning": "A választható lehetőség csak Windows 11-frissítésekhez érhető el",
- "profileNameWarning": "A névnek rövidebbnek kell lennie 64 karakternél",
- "specificLicensingRequired": "Néhány kiválasztott képességhez konkrét licenc szükséges."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Kisbetűk használatának engedélyezése a PIN-kódban",
- "notAllow": "Kisbetűk használatának tiltása a PIN-kódban",
- "requireAtLeastOne": "Legalább egy kisbetű használatának megkövetelése a PIN-kódban"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Speciális karakterek használatának engedélyezése a PIN-kódban",
- "notAllow": "Speciális karakterek használatának tiltása a PIN-kódban",
- "requireAtLeastOne": "Legalább egy speciális karakter használatának megkövetelése a PIN-kódban"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Nagybetűk használatának engedélyezése a PIN-kódban",
- "notAllow": "Nagybetűk használatának tiltása a PIN-kódban",
- "requireAtLeastOne": "Legalább egy nagybetű használatának megkövetelése a PIN-kódban"
- }
+ "InstallContextType": {
+ "device": "Eszköz",
+ "deviceContext": "Eszközkörnyezet",
+ "user": "Felhasználó",
+ "userContext": "Felhasználói környezet"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "Alkalmazásverzió",
- "dependencyName": "Függőség neve",
- "lastModifiedTime": "Utolsó módosítás időpontja",
- "relationship": "Kapcsolat",
- "replaced": "Lecserélve",
- "searchPlaceholder": "Szűrés alkalmazásnév alapján",
- "status": "Állapotadatok",
- "statusDetails": "Állapot",
- "supersedenceName": "Helyettesítés neve"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Gyermekfüggőség",
- "indirectSupersedence": "Nem kapcsolódik közvetlenül",
- "supersedenceAncestors": "Helyettesítő",
- "supersedenceDescendants": "Helyettesítve"
- },
- "SupersededReplaced": {
- "no": "Nem",
- "yes": "Igen"
- },
- "Tabs": {
- "chart": "Diagram",
- "dependency": "Függőség",
- "label": "Nézet: ",
- "supersedence": "Helyettesítés",
- "table": "Tábla"
- },
- "dependencyGraphAriaLabel": "Alkalmazásközi függőségi diagram",
- "supersedenceGraphAriaLabel": "Alkalmazás-helyettesítési diagram"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Válasszon felderítési szkriptet",
- "scriptFileLabel": "Válassza ki az észlelési szkriptet"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Ha engedélyezve van, az eszközöknek meg kell felelnie a JSON-fájlban meghatározott egyéni szabályoknak egy felderítési PowerShell-szkript által visszaadott egyéni adatok alapján.",
- "label": "Az Egyéni megfelelőség jelenleg az előzetes verzióban érhető el. Ha általánosan elérhetővé válik, további költségért hozzáadhatja a Microsoft Intune-t magában foglaló licencelési lehetőségekhez."
- },
- "ScriptPicker": {
- "objectName": "Szkript",
- "placeholder": "Kiválasztás kattintással",
- "searchboxPlaceholder": "Keresés a szkript neve alapján",
- "title": "Észlelési szkript kiválasztása"
- },
- "SummaryGrid": {
- "ariaLabel": "Egyéni megfelelőségi szabályok összegzése"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "Egy letiltási műveletre van szükség az összes megfelelőségi szabályzat esetében.",
+ "graceperiod": "Ütemezés (ennyi nappal a nem megfelelő állapot kezdete után)",
+ "graceperiodInfo": "Adja meg, hogy a művelet hány nem megfelelő állapotban töltött nap után legyen elindítva a felhasználó eszközén",
+ "subtitle": "Adja meg a művelet paramétereit",
+ "title": "Műveleti paraméterek"
+ },
+ "List": {
+ "gracePeriodDay": "{0} nappal a nem megfelelő állapot kezdete után",
+ "gracePeriodDays": "{0} nappal a nem megfelelő állapot kezdete után",
+ "gracePeriodHour": "{0} órával a nem megfelelő állapot kezdete után",
+ "gracePeriodHours": "{0} órával a nem megfelelő állapot kezdete után",
+ "gracePeriodMinute": "{0} perccel a nem megfelelő állapot kezdete után",
+ "gracePeriodMinutes": "{0} perccel a nem megfelelő állapot kezdete után",
+ "immediately": "Azonnal",
+ "schedule": "Ütemezés",
+ "scheduleInfoBalloon": "Nemmegfelelőség utáni napok",
+ "subtitle": "Adja meg a nem megfelelő eszközökön végrehajtandó műveletsort",
+ "title": "Műveletek"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Továbbiak",
+ "additionalRecipients": "További címzettek (e-mailben)",
+ "additionalRecipientsBladeTitle": "További címzettek kiválasztása",
+ "emailAddressPrompt": "Adja meg az e-mail-címeket (vesszővel elválasztva)",
+ "invalidEmail": "Érvénytelen e-mail-cím",
+ "messageTemplate": "Üzenetsablon",
+ "noneSelected": "Egy elem sincs kijelölve",
+ "notSelected": "Nincs kijelölve",
+ "numSelected": "{0} kijelölve",
+ "selected": "Kijelölve"
},
- "UploadFile": {
- "jsonFileLabel": "A JSON-fájl feltöltése és érvényesítése az egyéni megfelelőségi beállításokkal",
- "noFileSelectedError": "Válasszon ki egy json-fájlt",
- "parseFileSelectedError": "A json-fájl érvénytelen"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Szűrő",
- "noFilters": "Nincs"
- },
- "Platform": {
- "all": "Az összes",
- "android": "Android-eszközadminisztrátor",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Közös",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS és Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Ismeretlen",
- "unsupported": "Nem támogatott",
- "windows": "Windows",
- "windows10": "Windows 10 és újabb rendszerek",
- "windows10CM": "Windows 10 és újabb (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 és újabb rendszerek",
- "windows8And10": "Windows 8 és 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 és újabb rendszerek",
- "windows10AndWindowsServer": "Windows 10, Windows 11 és Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 és újabb (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows rendszerű számítógép"
- },
+ "block": "Eszköz megjelölése nem megfelelőként",
+ "lockDevice": "Eszköz zárolása (helyi művelet)",
+ "lockDeviceWithPasscode": "Eszköz zárolása (helyi művelet)",
+ "noAction": "Nincs művelet",
+ "noActionRow": "Nincsenek műveletek; a Hozzáadás gombbal adhat meg műveletet",
+ "pushNotification": "Leküldéses értesítés küldése a végfelhasználónak",
+ "remoteLock": "Nem megfelelő eszköz távolról zárolása",
+ "removeSourceAccessProfile": "Forrás hozzáférési profil eltávolítása",
+ "retire": "Eszköz hozzáadása a kivonási listához",
+ "wipe": "Adatok törlése",
+ "emailNotification": "E-mail küldése a felhasználónak"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Adminisztrátori csoportok",
+ "RoleAssignmentAdminDesc": "Az adminisztrátori csoportnak azon rendszergazdák a felhasználói, akik hozzá vannak rendelve ehhez a szerepkörhöz",
+ "rolesMenuTitle": "Endpoint Manager szerepkörök",
+ "RoleAssignmentScopeDesc": "A szerepkör-hozzárendelésben szereplő rendszergazdák megcélozhatják a szabályzatokat, az alkalmazásokat és a távoli feladatokat",
+ "RoleAssignmentScope": "Hatókörbe tartozó csoportok"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "Alkalmazásadatok",
"nameForOfficeSuitApp": "Alkalmazáscsomaggal kapcsolatos információk"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "Android rendszeren engedélyezheti PIN kód helyett az ujjlenyomatos azonosítás használatát. Ha a felhasználó munkahelyi fiókkal próbál meg hozzáférni az alkalmazáshoz, a rendszer ujjlenyomatot kér tőle.",
- "iOS": "iOS vagy iPadOS rendszerű eszközökön engedélyezheti PIN-kód helyett az ujjlenyomatos azonosítás használatát. Ha a felhasználó munkahelyi fiókkal próbál meg hozzáférni az alkalmazáshoz, a rendszer PIN-kód beírása helyett ujjlenyomatot kér tőle.",
- "mac": "Mac-eszközökön engedélyezheti PIN-kód helyett az ujjlenyomatos azonosítás használatát. Ha a felhasználó munkahelyi fiókkal próbál meg hozzáférni az alkalmazáshoz, a rendszer ujjlenyomatot kér tőle."
- },
- "allowWidgetContentSync": "Válassza a Letiltás lehetőséget, ha meg szeretné akadályozni, hogy a szabályzattal felügyelt alkalmazások adatokat mentsenek az alkalmazás vezérlőibe. Ha az Engedélyezés lehetőséget választja, a szabályzattal felügyelt alkalmazás adatokat menthet az alkalmazás vezérlőibe, ha ezek a funkciók támogatottak és engedélyezve vannak a szabályzattal felügyelt alkalmazásban. \r\n\r\n \r\n\r\nAz alkalmazások további konfigurációs képességeket biztosíthatnak az alkalmazáskonfigurációs szabályzatok révén. További információért tekintse meg az alkalmazás dokumentációját.",
- "appSharingFromLevel1": "Válassza ki az alábbi beállítások közül, hogy az alkalmazás milyen alkalmazásoktól fogadhat adatokat:",
- "appSharingFromLevel2": "{0}: Csak más, szabályzattal felügyelt alkalmazásokból érkező adatok fogadásának engedélyezése a szervezeti dokumentumokban vagy fiókokban",
- "appSharingFromLevel3": "{0}: Bármely alkalmazásból érkező adatok fogadásának engedélyezése szervezeti dokumentumokban vagy fiókokban",
- "appSharingFromLevel4": "{0}: Nem engedélyezett semmilyen alkalmazásból érkező adatok fogadása sem a szervezeti dokumentumokban vagy fiókokban",
- "appSharingFromLevel5": "{0}: Az adatátvitel engedélyezése bármely alkalmazásból és a felhasználói identitás nélküli bejövő adatok céges adatokként való kezelése.",
- "appSharingToLevel1": "Válassza ki az alábbi beállítások közül, hogy az alkalmazás milyen alkalmazásoknak küldhessen adatokat:",
- "appSharingToLevel2": "{0}: Szervezeti adatok küldésének engedélyezése kizárólag más, szabályzat által felügyelt alkalmazásokba",
- "appSharingToLevel3": "{0}: Szervezeti adatok küldésének engedélyezése bármely alkalmazásba",
- "appSharingToLevel4": "{0}: Nem engedélyezett szervezeti adatok küldése semmilyen alkalmazásba",
- "appSharingToLevel5": "{0}: Csak a szabályzat által felügyelt egyéb alkalmazásokba történő adatátvitel és a regisztrált eszközök MDM által felügyelt egyéb alkalmazásaiba való fájlátvitel engedélyezése",
- "appSharingToLevel6": "{0}: Csak a szabályzat által felügyelt egyéb alkalmazásokba történő adatátvitel engedélyezése és csak a szabályzat által felügyelt alkalmazások megjelenítése az operációs rendszer Megnyitás és Megosztás párbeszédpaneljeinek szűrésével",
- "assignmentFilterEdit1": "Ha hozzárendelési szűrőket alkalmaz erre a szabályzatra, a „Eszközkezelési típus” tulajdonság az „Alkalmazások” oldalon a „Cél minden eszköztípuson lévő alkalmazásokra” és az „Eszköztípusok” lapon megadott értékeken felül fog vonatkozni.",
- "assignmentFilterEdit2": "További információ a z alkalmazásvédelmi szabályzatok hozzárendeléséről.",
- "conditionalEncryption1": "A(z) {0} lehetőséget választva a belső alkalmazástár esetében letilthatja az alkalmazástitkosítást, ha a rendszer eszköztitkosítást észlel egy regisztrált eszközön.",
- "conditionalEncryption2": "Megjegyzés: az Intune csak az Intune MDM esetében észleli az eszközregisztrációt. A külső alkalmazástár továbbra is titkosítva lesz annak érdekében, hogy a nem felügyelt alkalmazások ne férhessenek hozzá az adatokhoz.",
- "contactSyncMac": "Ha a beállítás le van tiltva, az alkalmazások nem tudják a natív címjegyzékbe menteni a névjegyeket.",
- "contactsSync": "Válassza a Letiltás lehetőséget annak megakadályozásához, hogy a szabályzattal felügyelt alkalmazások adatokat mentsenek az eszköz natív alkalmazásaiba (például a Névjegyek, a Naptár és a vezérlők), vagy hogy a szabályzattal felügyelt alkalmazásokon belül megakadályozza a bővítmények használatát. Ha az Engedélyezés lehetőséget választja, a szabályzattal felügyelt alkalmazás menthet adatokat a natív alkalmazásokba vagy használhat bővítményeket, ha ezek a funkciók támogatottak és engedélyezettek a szabályzattal felügyelt alkalmazáson belül.
Az alkalmazások további konfigurációs lehetőségeket biztosíthatnak az alkalmazáskonfigurációs szabályzatokkal. További információért tekintse meg az alkalmazás dokumentációját.",
- "deviceTypeTargetingCreate1": "Az eszköztípusok célzása át lett helyezve a szabályzat-létrehozás Hozzárendelések lépésére.",
- "deviceTypeTargetingEdit1": "Ha hozzárendelési szűrőket alkalmaz erre a szabályzatra, a „Eszközkezelési típus” tulajdonság az „Alkalmazások” oldalon a „Cél minden eszköztípuson lévő alkalmazásokra” és az „Eszköztípusok” lapon megadott értékeken felül fog vonatkozni.",
- "deviceTypeTargetingEdit2": "Az eszközkezelési típusok célzásának szerkesztéséhez állítsa vissza a „Cél minden eszköztípuson lévő alkalmazásokra” beállítást = „Igen” értékre. Ezután hozzon létre egy MAM hozzárendelési szűrőt a kívánt „Eszközkezelési típus” értékekkel.",
- "deviceTypeTargetingHasMoved": "További információ a z alkalmazásvédelmi szabályzatok hozzárendeléséről",
- "encryptionAndroid1": "Az Intune-alapú mobilalkalmazás-felügyeleti szabályzathoz társított alkalmazások esetén a Microsoft szolgáltatja a titkosítást. Az adatok titkosítása szinkron módon, a mobilalkalmazás-felügyeleti szabályzatban megadott beállításoknak megfelelően történik a bemeneti/kimeneti fájlműveletek során. A felügyelt Android-alkalmazások AES-128 szabványú titkosítást alkalmaznak CBC módban, a platform kriptográfiai kódtárait használva. A titkosítási módszer nem felel meg a FIPS 140-2 szabványnak. Az SHA-256 szabványú titkosítás explicit utasításként, a SigAlg paraméterrel használható, de csak a 4.2-es és újabb verziójú eszközökön működik. Az eszköz tárolóján tárolt tartalmat a rendszer mindig titkosítja.",
- "encryptionAndroid2": "Ha az alkalmazásszabályzatban előírja a titkosítás használatát, a végfelhasználónak PIN-kódot kell beállítania és használnia az eszköze eléréséhez. Ha nincs beállítva PIN-kód az eszközhöz való hozzáféréshez, az alkalmazások nem indulnak el, a felhasználó pedig a következőhöz hasonló üzenetet fog látni: „Munkahelye PIN-kód engedélyezését írja elő az eszközön az alkalmazás eléréséhez.”",
- "encryptionMac1": "Az Intune-alapú mobilalkalmazás-felügyeleti szabályzathoz társított alkalmazások számára a Microsoft szolgáltatja a titkosítást. Az adatok titkosítása szinkron módon, a mobilalkalmazás-felügyeleti szabályzatban megadott beállításoknak megfelelően történik a bemeneti/kimeneti fájlműveletek során. A felügyelt Mac-alkalmazások AES-128 szabványú titkosítást alkalmaznak CBC módban, a platform kriptográfiai kódtárait használva. A titkosítási módszernek nem felel meg a FIPS 140-2 szabványnak. Az SHA-256 szabványú titkosítás explicit utasításként, a SigAlg paraméterrel használható, de csak a 4.2-es és újabb verziójú eszközökön működik. Az eszköz tárterületén tárolt tartalmat a rendszer mindig titkosítja.",
- "faceId1": "Ahol lehetséges, engedélyezheti PIN-kód helyett az arcfelismerés használatát. A rendszer kéri a felhasználókat, hogy biztosítsák az arcfelismerést, amikor a munkahelyi fiókjukkal férnek hozzá ehhez az alkalmazáshoz.",
- "faceId2": "Válassza az Igen lehetőséget PIN-kód helyett az arcfelismerés használatának engedélyezéséhez az alkalmazás-hozzáféréshez.",
- "managementLevelsAndroid1": "Ezzel a beállítással megadhatja, hogy a szabályzat androidos eszközfelügyelet által felügyelt eszközökre, Android Enterprise-eszközökre vagy nem felügyelt eszközökre vonatkozik.",
- "managementLevelsAndroid2": "{0}: A nem felügyelt eszközök azok az eszközök, melyek esetében a rendszer nem észlelte az Intune MDM általi felügyeletet. Ide tartoznak a külső MDM-szállítók is.",
- "managementLevelsAndroid3": "{0}: Intune által felügyelt eszközök, amelyek az Android Device Administration API-t használják.",
- "managementLevelsAndroid4": "{0}: Intune által felügyelt eszközök, amelyek az Android Enterprise munkahelyi profilokat vagy az Android Enterprise teljes körű eszközfelügyeletet használják.",
- "managementLevelsIos1": "Ezzel a beállítással adható meg, hogy a szabályzat az MDM által felügyelt vagy a nem felügyelt eszközökre érvényes.",
- "managementLevelsIos2": "{0}: A nem felügyelt eszközök azok az eszközök, melyek esetében a rendszer nem észlelte az Intune MDM általi felügyeletet. Ide tartoznak a külső MDM-szállítók is.",
- "managementLevelsIos3": "{0}: A felügyelt eszközöket az Intune MDM felügyeli.",
- "minAppVersion": "Az alkalmazás azon szükséges minimális verziószámának megadása, mellyel a felhasználóknak rendelkezniük kell ahhoz, hogy biztonságos hozzáférést kapjanak az alkalmazáshoz.",
- "minAppVersionWarning": "Az alkalmazás azon ajánlott minimális verziószámának megadása, mellyel a felhasználóknak rendelkezniük kell az alkalmazás biztonságos eléréséhez.",
- "minOsVersion": "Az operációs rendszer azon szükséges minimális verziószámának megadása, mellyel a felhasználóknak rendelkezniük kell ahhoz, hogy biztonságos hozzáférést kapjanak az alkalmazáshoz.",
- "minOsVersionWarning": "Az operációs rendszer azon ajánlott minimális verziószámának megadása, mellyel a felhasználóknak rendelkezniük kell ahhoz, hogy biztonságos hozzáférést kapjanak az alkalmazáshoz.",
- "minPatchVersion": "Az androidos biztonsági javítás azon legrégebbi verziójának megadása, amellyel a felhasználók még biztonságosan elérhetik az alkalmazást.",
- "minPatchVersionWarning": "Az androidos biztonsági javítás azon javasolt legrégebbi verziójának megadása, amellyel a felhasználók még biztonságosan elérhetik az alkalmazást.",
- "minSdkVersion": "Az Intune alkalmazásvédelmi szabályzatai azon szükséges minimális SDK-verziójának megadása, mellyel a felhasználóknak rendelkezniük kell ahhoz, hogy biztonságos hozzáférést kapjanak az alkalmazáshoz.",
- "requireAppPinDefault": "
Az Igen lehetőség kiválasztásával letilthatja az alkalmazás PIN-kódját eszközzárolás egy regisztrált eszközön való észlelésekor.
",
- "targetAllApps1": "Ezzel a beállítással célozhatók meg tetszőleges felügyeleti állapotú eszközökön található alkalmazások a szabályzattal.",
- "targetAllApps2": "A rendszer felülírja ezt a beállítást a szabályzatütközések feloldása során, ha egy felhasználó egy adott felügyeleti állapotot célzó szabályzattal rendelkezik.",
- "touchId2": "A(z) {0} beállítással PIN-kód helyett ujjlenyomatos azonosítást írhat elő az alkalmazás eléréséhez."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Adja meg, hogy hány nap elteltével kell a felhasználónak új PIN-kódot beállítania.",
- "previousPinBlockCount": "Ezzel a beállítással adható meg az Intune által megőrzött korábbi PIN-kódok száma. Minden új PIN-nek az Intune által megőrzöttektől különbözőnek kell lennie."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Ezzel a beállítással engedélyezhető, hogy a Windows Search továbbra is kereshessen a titkosított adatok között.",
- "authoritativeIpRanges": "Ennek a beállításnak az engedélyezésével felülbírálhatja az IP-címtartományok automatikus észlelését a Windowsban.",
- "authoritativeProxyServers": "Ennek a beállításnak az engedélyezésével felülbírálhatja a proxykiszolgálók automatikus észlelését a Windowsban.",
- "checkInput": "Ellenőrizze a bemenetek érvényességét",
- "dataRecoveryCert": "A helyreállítási tanúsítvány egy speciális titkosított fájlrendszer (EFS), amellyel helyreállíthatók a titkosított fájlok, ha a titkosítási kulcs elveszne vagy megsérülne. Hozzon létre egy helyreállítási tanúsítványt, és adja meg itt. További információt itt talál.",
- "enterpriseCloudResources": "
Adja meg azokat a felhőerőforrásokat, amelyeket cégesként szeretne kezelni és Windows Information Protection-szabályzattal szeretne védeni. Több erőforrás is megadható, ha elválasztja az egyes bejegyzéseket a | karakterrel.
Ha a cég rendelkezik proxykonfigurációval, akkor megadhatja azt a proxyt, amelyen keresztül a forgalom a megadott felhőerőforrásokba lesz továbbítva.
Adja meg a céges hálózatot kialakító IPv4-tartományokat. Ezeket a rendszer a céges hálózati határok meghatározásához megadott céges hálózati tartománynevekkel összefüggésben használja.
Ennek a beállításnak a megadása kötelező a Windows Information Protection engedélyezéséhez.
Az egyes bejegyzéseket vesszővel elválasztva több tartományt is megadhat.
Adja meg a céges hálózatot kialakító IPv6-tartományokat. Ezeket a rendszer a céges hálózati határok meghatározásához megadott céges hálózati tartománynevekkel összefüggésben használja.
Az egyes bejegyzéseket vesszővel elválasztva több tartományt is megadhat.
Ha a cégnél proxy van konfigurálva, megadhatja azt a proxyt, amelyen keresztül a Vállalati felhőalapú erőforrások menü beállításaiban megadott felhőbeli erőforrások felé irányuló forgalmat át szeretné irányítani.
Több érték megadásához pontosvesszővel válassza el az egyes bejegyzéseket.
Adja meg a céges hálózatot kialakító DNS-neveket. Ezeket a rendszer a céges hálózati határok meghatározásához megadott IP-tartományokkal összefüggésben használja. Az egyes bejegyzéseket vesszővel elválasztva több értéket is megadhat.
Ennek a beállításnak a megadása kötelező a Windows Information Protection engedélyezéséhez.
Például: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Itt adhatja meg a vállalati hálózatot alkotó DNS-neveket. Ezek a vállalati hálózathatárt definiáló IP-címtartományokkal együtt használatosak. Több értéket is megadhat a függőleges vonal (|) karakterrel elválasztva.
Ez a beállítás szükséges a Windows Information Protection engedélyezéséhez.
Példa: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
Ha a hálózat kifelé irányuló proxykat tartalmaz, itt adhatja meg őket. A proxykiszolgáló címének megadásakor adja meg azt a portot is, amelyen keresztül a Windows Information Protection engedélyezni és védeni fogja a forgalmat.
Megjegyzés: a lista nem tartalmazhat a vállalati belső proxykiszolgálók listáján szereplő kiszolgálókat. Több érték megadásához pontosvesszővel válassza el az egyes bejegyzéseket.
",
- "maxInactivityTime1": "Ez a beállítás azt határozza meg, hogy az eszközön legfeljebb hány percnyi inaktivitás után lépjen működésbe a PIN-kóddal vagy jelszóval feloldható zárolás. A felhasználók a Beállítások alkalmazásban bármilyen létező, a beállított maximális értéknél rövidebb időkorlátot megadhatnak. Megjegyzés: A Lumia 950 és 950XL készülékeken a maximális időkorlát az ebben a szabályzatban meghatározott értéktől függetlenül 5 perc.",
- "maxInactivityTime2": "0 (alapértelmezett) – Nincs időkorlát. Az alapértelmezett 0 érték azt jelenti, hogy nincs beállítva időkorlát.",
- "maxPasswordAttempts1": "A szabályzat másként működik mobileszközökön és asztali számítógépeken.",
- "maxPasswordAttempts2": "Mobileszközön a szabályzatban meghatározott érték elérésekor a felhasználó eszközéről törlődnek az adatok.",
- "maxPasswordAttempts3": "Asztali számítógépen a szabályzatban meghatározott érték elérésekor nem törlődnek az adatok, hanem a számítógép BitLocker-alapú helyreállítási módra vált, amelyben az adatok nem érhetők el, de helyreállíthatók. A szabályzat nem hajtható végre, ha nincs engedélyezve a BitLocker.",
- "maxPasswordAttempts4": "A sikertelen próbálkozások korlátjának elérése előtt a felhasználó a zárolási képernyőre kerül vissza, és a rendszer figyelmezteti, hogy további sikertelen próbálkozások esetén zárolva lesz a számítógép. Ha a felhasználó eléri a korlátot, az eszköz automatikusan újraindul, és a BitLocker-helyreállítás lapja jelenik meg rajta. A lapon a felhasználó megadhatja a BitLocker helyreállítási kulcsát.",
- "maxPasswordAttempts5": "0 (alapértelmezett) – Az eszközről soha nem törlődnek az adatok helytelen PIN-kód vagy jelszó megadása esetén.",
- "maxPasswordAttempts6": "Ha a szabályzat minden beállításának értéke 0, a 0 a legbiztonságosabb érték. Minden más esetben a szabályzat szerinti minimális érték a legbiztonságosabb.",
- "mdmDiscoveryUrl": "Adja meg annak az MDM-es regisztrációs végpontnak az URL-címét, amelyet az MDM-ben regisztráló felhasználók használni fognak. Az Intune-ban ez a beállítás alapértelmezés szerint meg van adva.",
- "minimumPinLength1": "Az itt megadott egész szám határozza meg, hogy legalább hány karakterből kell állnia a PIN-kódnak. Az alapértelmezett érték a 4. A szabályzatbeállításhoz megadható minimális érték a 4. A legnagyobb megadható érték kisebb, mint a PIN-kód maximális hossza beállításnál megadott szám, vagy mint 127 (amelyik a kettő közül kisebb).",
- "minimumPinLength2": "Ha konfigurálja ezt a szabályzatbeállítást, a PIN-kód hosszának legalább az itt megadott számot kell elérnie. Ha letiltja vagy nem konfigurálja a szabályzatbeállítást, a PIN-kódnak legalább 4 karakter hosszúnak kell lennie.",
- "name": "Ennek a hálózathatárnak a neve",
- "neutralResources": "
Ha a cégnél hitelesítés-átirányítási végpontokat használnak, itt adhatja meg őket. Az itt megadott helyeket a rendszer vagy személyes, vagy céges helyként kezeli a kapcsolat átirányítás előtti környezetétől függően.
Több érték megadásához vesszővel válassza el az egyes bejegyzéseket.
Példa: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Az itt megadott érték határozza meg, hogy használható-e a Vállalati Windows Hello a Windowsba való bejelentkezéshez.",
- "passportForWork2": "Alapértelmezés szerint a beállítás értéke igaz. Ha a szabályzatbeállítást hamis értékűre állítja, a felhasználó nem építheti ki a Vállalati Windows Hello szolgáltatást, kivéve a Microsoft Entrához csatlakoztatott olyan mobiltelefonokon, amelyeken a kiépítés kötelező.",
- "pinExpiration": "A szabályzatbeállítás maximális megadható értéke 730, minimális értéke pedig 0. Ha a szabályzatbeállítás értéke 0, a felhasználó PIN-kódja soha nem fog lejárni.",
- "pinHistory1": "A szabályzatbeállítás maximális megadható értéke 50, minimális értéke pedig 0. Ha a szabályzatbeállítás értéke 0, nem szükséges tárolni a korábbi PIN-kódokat.",
- "pinHistory2": "A felhasználó aktuális PIN-kódja bekerül a felhasználói fiókhoz társított PIN-kódok közé. A PIN-kódok előzményei a PIN-kód átállításakor elvesznek.",
- "protectUnderLock": "Alkalmazások tartalmának védelme, amikor az eszköz zárolt állapotban van.",
- "protectionModeBlock": "
Letiltás: Annak megakadályozása, hogy a céges adatok kikerüljenek a védett alkalmazásokból.
",
- "protectionModeOff": "
Ki: A felhasználó szabadon áthelyezheti az adatokat a védett alkalmazásokból. Nincs műveletnaplózás.
",
- "protectionModeOverride": "
Felülbírálások engedélyezése: A rendszer üzenetet jelenít meg a felhasználónak, ha védett alkalmazásból próbál adatokat áthelyezni egy nem védett alkalmazásba. Ha a felhasználó felülbírálja az üzenetet, a műveletet a rendszer naplózza.
",
- "protectionModeSilent": "
Néma: A felhasználó szabadon áthelyezheti az adatokat a védett alkalmazásokból. Ezeket a műveleteket a rendszer naplózza.
",
- "required": "Szükséges",
- "revokeOnMdmHandoff": "Hozzáadva a Windows 10 1703-as verziójában. Ezzel a szabályzattal megadhatja, hogy vissza kell-e vonni a WIP-kulcsokat, ha az eszközt a MAM-ról az MDM-re frissíti. Ha a „Kikapcsolva” értéket állítja be, a kulcsok nem lesznek visszavonva, és a felhasználó a frissítés után továbbra is hozzáfér a védett fájlokhoz. Ezt az értéket javasoljuk megadni, ha az MDM szolgáltatásban a WIP EnterpriseID a MAM szolgáltatással azonos értékre van beállítva.",
- "revokeOnUnenroll": "Ha a beállítás be van kapcsolva, a titkosítási kulcsok vissza lesznek vonva, ha az eszközt kiveszik a szabályzat hatóköréből.",
- "rmsTemplateForEdp": "Az RMS-titkosításhoz használandó sablon GUID-ja. Az Azure RMS-sablonnal a rendszergazda részletesen konfigurálhatja, hogy ki és meddig férhet hozzá az RMS-sel védett fájlokhoz.",
- "showWipIcon": "Ha ez a beállítás be van kapcsolva, a felhasználót egy átfedő ikon értesíti, ha céges környezetben dolgozik.",
- "useRmsForWip": "Ez a beállítás azt határozza meg, hogy a Windows Információvédelemben engedélyezett-e az Azure RMS-alapú titkosítás használata."
- },
- "requireAppPin": "
Az Igen lehetőség kiválasztásával letilthatja az alkalmazás PIN-kódját eszközzárolás egy regisztrált eszközön való észlelésekor.
Megjegyzés: Az Intune iOS vagy iPadOS rendszeren külső EMM-megoldással nem tudja észlelni az eszközregisztrációt.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "Az alkalmazás telepítése kényszerítheti az eszköz újraindítását",
- "basedOnReturnCode": "Viselkedés meghatározása a visszatérési kódok alapján",
- "force": "Az Intune az eszköz kötelező újraindítását kezdeményezi",
- "suppress": "Nincs megadott művelet"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Szükséges telepítési idő (perc)",
- "maxRunTimeInMinutesToolTip": "Azon percek száma, amennyit a rendszer a program telepítésének befejezésére vár. Az alapértelmezett érték 60 perc."
- },
- "RunAsAccountOptions": {
- "system": "Rendszer",
- "user": "Felhasználó"
- },
- "availableUninstall": "Eltávolítás elérhetőségének engedélyezése",
- "availableUninstallTooltip": "Válassza az Igen lehetőséget, ha lehetővé szeretné tenni a Céges portál felhasználóinak, hogy eltávolíthassák az alkalmazást. Válassza a Nem lehetőséget, ha nem szeretné, hogy a felhasználók eltávolíthassák az alkalmazást a Céges portálról.",
- "bladeTitle": "Program",
- "deviceRestartBehavior": "Viselkedés az eszköz újraindításához",
- "deviceRestartBehaviorTooltip": "Válassza ki az eszköz sikeres alkalmazástelepítés utáni újraindítási viselkedését. Az eszköz a visszatérési kódok konfigurációs beállításai alapján történő újraindításához válassza a Viselkedés meghatározása a visszatérési kódok alapján lehetőséget. Válassza a Nincs megadott művelet lehetőséget az eszköz újraindításának letiltásához az MSI-alapú alkalmazások telepítése során. Válassza Az alkalmazástelepítés kényszerítheti az eszköz újraindítását lehetőséget annak engedélyezéséhez, hogy az alkalmazástelepítés az újraindítások letiltása nélkül befejeződjön. Válassza Az Intune kényszeríti az eszköz kötelező újraindítását lehetőséget ahhoz, hogy sikeres alkalmazástelepítés után mindig újrainduljon az eszköz.",
- "header": "Adja meg a parancsokat az alkalmazás telepítéséhez és leválasztásához:",
- "installCommand": "Telepítési parancs",
- "installCommandMaxLengthErrorMessage": "A telepítési parancs nem lehet hosszabb 1024 karakternél.",
- "installCommandTooltip": "Az alkalmazás telepítéséhez használt teljes telepítési parancssor.",
- "runAs32Bit": "Telepítési és leválasztási parancsok futtatása 32 bites folyamatban 64 bites ügyfeleken",
- "runAs32BitTooltip": "Válassza az Igen lehetőséget az alkalmazás 32 bites folyamatban való telepítéséhez és leválasztásához 64 bites ügyfeleken. Válassza a Nem (alapértelmezett) lehetőséget, ha az alkalmazást 64 bites folyamatban szeretné telepíteni és leválasztani 64 bites ügyfeleken. A 32 bites ügyfelek mindig 32 bites folyamatot fognak használni.",
- "runAsAccount": "Telepítési viselkedés",
- "runAsAccountTooltip": "Ha az alkalmazást az összes felhasználó számára szeretné telepíteni, és ez támogatott, válassza a Rendszer lehetőséget. Ha az alkalmazást az eszközön bejelentkezett felhasználó számára szeretné telepíteni, válassza a Felhasználó lehetőséget. A kettős célú MSI-alkalmazások esetében a módosítások mindaddig megakadályozzák a frissítések és az eltávolítások sikeres végrehajtását, amíg vissza nem állítja az eredeti telepítés időpontjában alkalmazott értéket.",
- "selectorLabel": "Program",
- "uninstallCommand": "Leválasztási parancs",
- "uninstallCommandTooltip": "Az alkalmazás eltávolításához használt teljes eltávolítási parancssor."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Új",
- "createNewResourceAccountInfo": "
\r\nÚj erőforrásfiók létrehozása a regisztráció során. Az erőforrásfiók azonnal bekerül az Erőforrásfiók táblába, de csak az eszköz regisztrálása és a Surface Hub-előfizetés ellenőrzése után lesz aktív. További információ az erőforrás-fiókokról
\r\n ",
- "createNewResourceTitle": "Új erőforrásfiók létrehozása",
- "deviceNameInvalid": "Az eszköznév formátuma érvénytelen",
- "deviceNameRequired": "Az eszköz nevét kötelező megadni",
- "editResourceAccountLabel": "Szerkesztés",
- "selectExistingCommandMenu": "Meglévő kiválasztása"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "A nevek legfeljebb 15 karakterből állhatnak, és tartalmazhatnak betűket (a–z, A–Z), számokat (0–9) és kötőjelet. Nem állhatnak csak számokból, és nem tartalmazhatnak szóközt."
- },
- "Header": {
- "addressableUserName": "Felhasználóbarát név",
- "azureADDevice": "Társított Microsoft Entra-eszköz",
- "batch": "Csoportcímke",
- "dateAssigned": "Hozzárendelés dátuma",
- "deviceAccountPwd": "Szolgáltatásfiók-jelszó",
- "deviceAccountUpn": "Eszközfiók",
- "deviceDisplayName": "Eszköznév",
- "deviceFriendlyName": "Eszköz rövid neve",
- "deviceName": "Eszköznév",
- "deviceUseType": "Eszközhasználat típusa",
- "enrollmentState": "Regisztráció állapota",
- "intuneDevice": "Társított Intune-eszköz",
- "lastContacted": "Utolsó kapcsolatlétesítés",
- "make": "Gyártó:",
- "model": "Modell",
- "profile": "Hozzárendelt profil",
- "profileStatus": "Profil állapota",
- "purchaseOrderId": "Megrendelőlap",
- "resourceAccount": "Erőforrásfiók",
- "serialNumber": "Sorozatszám",
- "userPrincipalName": "Felhasználó"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Felhasználóbarát név megadása kötelező!",
- "pwdRequired": "Kötelező megadni a jelszót.",
- "pwdValidFormat": "Nem sikerült frissíteni a jelszót. Az új jelszóként megadott érték nem felel meg a tartomány hosszúsági vagy összetettségi követelményeinek.",
- "upnRequired": "Az eszközfiók megadása kötelező",
- "upnValidFormat": "Az értékek betűket (a-z, A-Z), számokat (0-9) és kötőjeleket tartalmazhatnak. Az értékek nem tartalmazhatnak üres szóközt."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Értekezlet és bemutató",
- "teamCollaboration": "Csoportalapú együttműködés"
- },
- "Devices": {
- "featureDescription": "A Windows AutoPilot lehetővé teszi a felhasználók kezdőélményének testreszabását.",
- "importErrorStatus": "Egyes eszközök nem lettek importálva. További információért kattintson ide.",
- "importPendingStatus": "Az importálás folyamatban van. Eltelt idő: {0} perc. A folyamat akár {1} percig is eltarthat."
- },
- "DirectoryService": {
- "activeDirectoryAD": "A Microsoft Entrához hibrid módon csatlakoztatva",
- "activeDirectoryADLabel": "Csatlakoztatás hibrid Microsoft Entrához az Autopilottal",
- "azureAD": "A Microsoft Entrához csatlakoztatva",
- "unknownType": "Ismeretlen típus"
- },
- "Filter": {
- "enrollmentState": "Állam",
- "profile": "Profil állapota"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "A felhasználó felhasználóbarát nevét meg kell adni."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Elnevezési sablon létrehozása, amellyel neveket adhat hozzá az eszközökhöz a regisztráció során.",
- "label": "Eszköznévsablon alkalmazása"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "Ha az Autopilot üzembehelyezési profilja a Microsoft Entrához hibrid módon csatlakoztatott típusú, az eszközök elnevezése a tartományhoz való csatlakozás konfigurációjában megadott beállítások használatával történik."
- },
- "ComputerNameTemplate": {
- "emptyValue": "SajátCég – %RAND:4%",
- "label": "Név megadása",
- "noDisallowedChars": "A név csak számokból, betűkből és kötőjelekből állhat, illetve a %SERIAL% vagy a %RAND:x% makrót tartalmazhatja",
- "serialLength": "A %SERIAL% makróval nem lehet 7-nél több karaktert használni",
- "validateLessThan15Chars": "A név nem lehet hosszabb 15 karakternél",
- "validateNoSpaces": "A számítógépnevek nem tartalmazhatnak szóközt.",
- "validateNotAllNumbers": "A névnek betűt és/vagy kötőjelet is kell tartalmaznia",
- "validateNotEmpty": "A név nem lehet üres",
- "validateOnlyOneMacro": "A név csak az egyiket tartalmazhatja a %SERIAL% és a %RAND:x% makró közül"
+ "ScopeTypes": {
+ "allDevices": "Minden eszköz",
+ "allUsers": "Minden felhasználó",
+ "allUsersAndDevices": "Minden felhasználó és minden eszköz",
+ "selectedGroups": "Kiválasztott csoportok"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Leírás",
+ "placeholder": "Adja meg a leírást"
+ },
+ "NameTextBox": {
+ "label": "Név",
+ "placeholder": "Név megadása"
+ },
+ "PublisherTextBox": {
+ "label": "Közzétevő",
+ "placeholder": "Közzétevő megadása"
+ },
+ "VersionTextBox": {
+ "label": "Verzió"
+ },
+ "headerDescription": "Létrehozhat egy új egyéni szkriptcsomagot a saját észlelési és javítási szkriptjeiből."
},
- "ConfigureComputerNameTemplate": {
- "description": "Egyedi név létrehozása az eszközök számára. A név legfeljebb 15 karakterből állhat, valamint betűt (a-z, A-Z), számot (0-9) és kötőjelet tartalmazhat. A név nem állhat csak számokból, és nem tartalmazhat szóközt. A %SERIAL% makró használatával egy hardverspecifikus sorozatszámot, a %RAND:x% makróval pedig egy véletlenszerű számokból álló sztringet adhat hozzá a névhez (az x helyére a hozzáadandó számjegyek számát kell írni)."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "A kezdőélmény a Windows billentyű 5-szöri megnyomásával, a felhasználó hitelesítése nélküli futtatásának engedélyezése az eszköz regisztrálásához és a rendszerkörnyezet alkalmazásainak és beállításainak kiépítéséhez. A felhasználói környezet alkalmazásait és beállításait akkor küldi el a rendszer, amikor a felhasználó bejelentkezik.",
- "label": "Előre kiépített üzembe helyezés engedélyezése"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Az Autopilot hibrid Microsoft Entra csatlakoztatási folyamat akkor is folytatódik, ha a kezdőélmény során nem jön létre tartományvezérlői kapcsolat.",
- "label": "AD-kapcsolatellenőrzés kihagyása"
- },
- "accountType": "Felhasználói fiók típusa",
- "accountTypeInfo": "Adja meg, hogy a felhasználók rendszergazdák vagy általános jogú felhasználók legyenek-e az eszközön. Vegye figyelembe, hogy ez a beállítás nincs hatással a globális és a céges rendszergazdai fiókokra. E fiókok nem lehetnek általános jogú felhasználók, mert a Microsoft Entra ID összes felügyeleti funkciójához hozzáférnek.",
- "configOOBEInfo": "
",
- "configureDevice": "Telepítési üzemmód",
- "configureDeviceHintForSurfaceHub2": "Az Autopilot csak Surface Hub 2 esetén támogatja az öntelepítési módot. Ez a mód nem társítja a felhasználót a regisztrált eszközhöz, ezért nem igényel felhasználói hitelesítő adatokat.",
- "configureDeviceHintForWindowsPC": "
\r\n A felhasználói affinitás azt szabályozza, hogy az eszközök a felhasználókhoz legyenek-e rendelve, és azt adja meg, hogy meg kell-e adni a felhasználói hitelesítő adatokat az eszköz üzembe helyezéséhez.\r\n
\r\n
\r\n
\r\n Regisztráció felhasználói affinitással: A rendszer az adott eszközt regisztráló felhasználóhoz rendeli hozzá az eszközöket, és felhasználói hitelesítő adatok szükségesek az eszköz üzembe helyezéséhez.\r\n
\r\n
\r\n Regisztráció felhasználói affinitás nélkül (előzetes verzió): Az eszközök nincsenek az adott eszközt regisztráló felhasználókhoz rendelve, és nem szükségesek felhasználói hitelesítő adatok az eszköz üzembe helyezéséhez\r\n
\r\n
",
- "createSurfaceHub2Info": "A Surface Hub 2 eszközök Autopilot-regisztrációs beállításainak konfigurálása. Alapértelmezés szerint az Autopilot lehetővé teszi a felhasználói hitelesítés kihagyását a kezdőélmény (OOBE) során. További információ a Surface Hub 2-höz készül Windows Autopilotról.",
- "createWindowsPCInfo": "\r\n
\r\nAz AutoPilot-eszközök alábbi beállításai automatikusan engedélyezve vannak az öntelepítési módban:\r\n
\r\n
\r\n
\r\n Munkahelyi vagy Otthoni használat kiválasztásának kihagyása\r\n
\r\n
\r\n OEM-regisztráció és OneDrive-konfiguráció kihagyása\r\n
\r\n
\r\n A felhasználó kezdőélményben történő hitelesítésének kihagyása\r\n
\r\n
",
- "endUserDevice": "Felhasználó által vezérelt",
- "hideEscapeLink": "Fiókváltási lehetőségek elrejtése",
- "hideEscapeLinkInfo": "A fiókváltás és a másik fiókkal való újrakezdés lehetőségei a céges bejelentkezési lapon, illetve a tartományhibalapon jelennek meg a kezdeti eszközbeállítás során. A beállítások elrejtéséhez be kell állítania a vállalati védjegyzést a Microsoft Entra ID-ben (a Windows 10 1809-es vagy újabb verziója, vagy Windows 11 szükséges).",
- "info": "Az AutoPilot-profil beállításai határozzák meg a felhasználói kezdőélményt a Windows első indításakor. ",
- "language": "Nyelv (régió)",
- "languageInfo": "Adja meg a használandó nyelvet és régiót.",
- "licenseAgreement": "Microsoft szoftverlicenc-szerződés",
- "licenseAgreementInfo": "Adja meg, hogy a végfelhasználói licencszerződés megjelenjen-e a felhasználóknak.",
- "plugAndForgetDevice": "Önálló központi telepítés",
- "privacySettingWarning": "Megváltozott a diagnosztikai adatgyűjtés alapértelmezett értéke a Windows 10 1903-as és újabb, vagy Windows 11 verziókat futtató eszközökön. ",
- "privacySettings": "Adatvédelmi beállítások",
- "privacySettingsInfo": "Adja meg, hogy az adatvédelmi beállítások megjelenjenek-e a felhasználóknak.",
- "showCortanaConfigurationPage": "Cortana-konfiguráció",
- "showCortanaConfigurationPageInfo": "A megjelenítés lehetővé teszi a Cortana-konfiguráció bevezetését a beállítás során.",
- "skipEULAWarning": "Fontos információ a licencfeltételek elrejtéséről",
- "skipKeyboardSelection": "Billentyűzet automatikus konfigurálása",
- "skipKeyboardSelectionInfo": "Ha az értéke igaz, a rendszer kihagyja a billentyűzet-kiválasztási lapot, amennyiben a nyelv be van beállítva.",
- "subtitle": "AutoPilot-profilok",
- "title": "Kezdőélmény (OOBE)",
- "useOSDefaultLanguage": "Operációs rendszer alapértelmezése",
- "userSelect": "Felhasználó kiválasztása"
- },
- "Sync": {
- "lastRequestedLabel": "Legutóbbi szinkronizálási kérelem",
- "lastSuccessfulLabel": "Utolsó sikeres szinkronizálás",
- "syncInProgress": "A szinkronizálás folyamatban van. Kis idő múlva térjen vissza.",
- "syncInitiated": "Megkezdődött az AutoPilot-beállítások szinkronizálása.",
- "syncSettingsTitle": "AutoPilot-beállítások szinkronizálása"
- },
- "Title": {
- "devices": "Windows AutoPilot-eszközök"
- },
- "Tooltips": {
- "addressableUserName": "Az eszköz beállítása során megjelenített üdvözlési név.",
- "azureADDevice": "Tekintse meg a hozzárendelt eszköz adatait. Az N/A azt jelzi, hogy nincs hozzárendelt eszköz.",
- "batch": "Eszközök csoportjának azonosítására használható sztringattribútum. Az Intune Csoportcímke mezője a Microsoft Entra-eszközök OrderID attribútumára van leképezve.",
- "dateAssigned": "A profil az eszközhöz való hozzárendelésének időbélyege.",
- "deviceAccountPwd": "Az eszközfiók jelszava Surface Hub-eszközökhöz. Ha meg lett adva, adja meg az eszközfiókot és a felhasználóbarát nevet is.",
- "deviceAccountUpn": "Az eszközfiók e-mail-címe Surface Hub-eszközökhöz. Ha meg lett adva, adja meg az eszközfiók jelszavát és felhasználóbarát nevét is.",
- "deviceDisplayName": "Adjon egyedi nevet az eszköznek. A rendszer figyelmen kívül hagyja ezt a nevet a hibrid Microsoft Entrához csatlakozó üzemelő példányoknál. Az eszköz neve továbbra is a hibrid Microsoft Entra-eszközök tartományhoz való csatlakoztatási profiljából származik.",
- "deviceFriendlyName": "Az eszközfiók felhasználóbarát neve Surface Hub-eszközökhöz. Ha meg lett adva, adja meg az eszközfiókot és az eszközfiók jelszavát is.",
- "deviceName": "A rendszer ezt a nevet jeleníti meg, amikor valaki megpróbálja felderíteni és csatlakoztatni az eszközt.",
- "deviceUseType": " Az eszköz beállítása az Ön a választásain alapul. Később bármikor módosíthatja a beállításokat.\r\n
\r\n
Értekezletek és bemutatók alkalmával a Windows Hello nincs bekapcsolva, és az adatok minden munkamenet után törlődnek.\r\n
\r\n
Csoportalapú együttműködés esetén a Windows Hello be van kapcsolva, és a profilokat menti a rendszer, hogy felgyorsítsa a bejelentkezést
\r\n
",
- "enrollmentState": "Azt adja meg, hogy az eszköz regisztrálva van-e.",
- "intuneDevice": "Tekintse meg a hozzárendelt eszköz adatait. Az N/A azt jelzi, hogy nincs hozzárendelt eszköz.",
- "lastContacted": "Az eszközzel való legutóbbi kapcsolatfelvétel időbélyege.",
- "make": "A kiválasztott eszköz gyártója.",
- "model": "A kiválasztott eszköz modellje",
- "profile": "Az eszközhöz rendelt profil neve.",
- "profileStatus": "Azt adja meg, hogy van-e hozzárendelve profil az eszközhöz.",
- "purchaseOrderId": "Beszerzési rendelés azonosítója",
- "resourceAccount": "Az eszköz identitása vagy egyszerű felhasználóneve (UPN).",
- "serialNumber": "A kiválasztott eszköz sorszáma.",
- "userPrincipalName": "Az eszköz beállítása során a hitelesítés előzetes kitöltéséhez használt felhasználó."
- },
- "allDevices": "Minden eszköz",
- "allDevicesAlreadyAssignedError": "Egy Autopilot-profil már hozzá van rendelve az összes eszközhöz.",
- "assignFailedDescription": "Nem sikerült frissíteni a(z) {0} hozzárendeléseit.",
- "assignFailedTitle": "Nem sikerült frissíteni az AutoPilot-profil hozzárendeléseit.",
- "assignSuccessDescription": "A(z) {0} hozzárendeléseinek frissítése sikerült.",
- "assignSuccessTitle": "Az AutoPilot-profil hozzárendeléseinek frissítése sikerült.",
- "assignSufaceHub2ProfileNextStep": "Az üzembe helyezés következő lépései",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Rendelje hozzá ezt a profilt legalább egy eszközcsoporthoz",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Rendeljen hozzá egy erőforrásfiókot minden olyan Surface Hub-eszközhöz, amelyhez telepíti ezt a profilt",
- "assignedDevicesCount": "Hozzárendelt készülékek",
- "assignedDevicesResourceAccountDescription": "
A profilnak egy eszközre való telepítéséhez hozzá kell rendelnie az eszközt egy erőforrás-fiókhoz. Jelöljön ki egyszerre egy eszközt egy meglévő erőforrásfiók hozzárendeléséhez vagy egy új létrehozásához. További információ az erőforrás-fiókokról
",
- "assignedDevicesResourceAccountStatusBarMessage": "Ez a tábla csak a profilhoz hozzárendelt Surface Hub 2 eszközöket sorolja fel.",
- "assigningDescription": "A(z) {0} hozzárendeléseinek frissítése folyamatban van.",
- "assigningTitle": "Az AutoPilot-profil hozzárendeléseinek frissítése folyamatban van.",
- "autoremediationContext": "Hardverváltozást észleltünk az eszközön. Megpróbáljuk automatikusan regisztrálni az új hardvert. Most nincs teendője, az állapot a következő bejelentkezéskor frissül az eredménnyel. További információ a profil alaphelyzetbe állításáról.",
- "autoremediationTitle": "A(z) {0}. eszköz javítása függőben van",
- "cannotDeleteMessage": "A profil csoportokhoz van hozzárendelve. Minden csoport a profilhoz való hozzárendelését meg kell szüntetni ahhoz, hogy azt törölni lehessen.",
- "cannotDeleteTitle": "Nem törölhető: {0}",
- "createdDateTime": "Létrehozva",
- "deleteMessage": "Ha törli ezt az AutoPilot-profilt, a profilhoz hozzárendelt összes eszköz „Nincs hozzárendelve” állapotú lesz.",
- "deleteMessageWithPolicySet": "A(z) {0} egy vagy több szabályzatkészletben szerepel. A(z) {0} törlése után a továbbiakban nem tudja hozzárendelni a szabályzatkészleteken keresztül.",
- "deleteTitle": "Biztosan törli ezt a profilt?",
- "description": "Leírás",
- "deviceType": "Eszköztípus",
- "deviceUse": "Eszköz használata",
- "directoryServiceHintForSurfaceHub2": "
\r\n Az Autopilot csak a Surface Hub 2 eszközöknél támogatja a Microsoft Entrához csatlakoztatott beállítást. Adja meg, hogyan csatlakoznak az eszközök az Active Directoryhoz (AD) a szervezetben.\r\n
\r\n
\r\n
\r\n Microsoft Entrához csatlakozott: Csak felhőalapú, nincs helyszíni Windows Server Active Directory.\r\n
\r\n Adja meg, hogyan csatlakozhatnak az eszközök az Active Directoryhoz (AD) a munkahelyen:\r\n
\r\n
\r\n
\r\n Microsoft Entrához csatlakoztatott: Csak felhőalapú, nincs helyszíni Windows Server Active Directory\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Hiba történt a hozzárendelt eszközök számának beolvasása során.",
- "getAssignmentsError": "Hiba történt az AutoPilot-profilok hozzárendeléseinek beolvasása során.",
- "harvestDeviceId": "Minden megcélzott eszköz AutoPilot-eszközzé alakítása",
- "harvestDeviceIdDescription": "Ez a profil alapértelmezés szerint csak az AutoPilot szolgáltatásból szinkronizált AutoPilot-eszközökre alkalmazható.",
- "harvestDeviceIdInfo": "\r\n Válassza az Igen lehetőséget az összes céleszköz regisztrálásához az Autopilotban, ha még nincsenek regisztrálva. A regisztrált eszközökön a Windows kezdőélmény (OOBE) legközelebbi futtatásakor a rendszer a hozzárendelt Autopilot-forgatókönyvet fogja megvalósítani.\r\n \r\n Vegye figyelembe, hogy egyes Autopilot-forgatókönyvekhez meghatározott minimális Windows-buildek szükségesek. Győződjön meg arról, hogy az eszköze rendelkezik a forgatókönyv megvalósításához szükséges minimális builddel.\r\n \r\n A profil eltávolítása az érintett eszközöket nem távolítja el az Autopilotból. Ha el szeretne távolítani egy eszközt az Autopilotból, használja a Windows Autopilot-eszközök nézetet.\r\n ",
- "harvestDeviceIdWarning": "Átalakítás után az Autopilot-eszközök csak akkor állíthatók vissza, ha törli őket az Autopilot-eszközök listájából.",
- "holoLensCommandMenu": "HoloLens",
- "info": "A Windows AutoPilot-telepítési profil lehetővé teszi a kezdőélmény testreszabását az eszközökön.",
- "invalidProfileNameMessage": "A(z) {0} karakter használata nem engedélyezett",
- "joinTypeLabel": "A Microsoft Entra ID csatlakoztatása a következőként:",
- "lastModifiedDateTime": "Utolsó módosítás:",
- "manualRemediationContext": "Hardverváltozást észleltünk az eszközön. Alaphelyzetbe állításakor nem kap automatikusan Autopilot-profilt, hacsak nem regisztrálja újra az eszközt. További információ a profil alaphelyzetbe állításáról.",
- "manualRemediationTitle": "A(z) {0}. eszköz beavatkozást igényel",
- "name": "Név",
- "noAutopilotProfile": "Nincsenek AutoPilot-profilok",
- "notEnoughPermissionAssignedError": "Nem rendelkezik a megfelelő engedélyekkel a profil egy vagy több kiválasztott csoporthoz történő hozzárendeléséhez. Forduljon a rendszergazdához.",
- "profile": "profil",
- "resourceAccountStatusBarMessage": "Minden olyan Surface Hub 2 eszköz esetében, amelyen ezt a profilt telepíti, meg kell adni egy erőforrás-fiókot. További információért kattintson ide.",
- "selectServices": "Azon címtárszolgáltatások megadása, amelyekhez az eszközök csatlakozni fognak",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Telepítési üzemmód",
- "windowsPCCommandMenu": "Windows rendszerű számítógép",
- "directoryServiceLabel": "Csatlakozás a Microsoft Entra ID-hez a következőként:"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Adminisztrátori csoportok",
- "RoleAssignmentAdminDesc": "Az adminisztrátori csoportnak azon rendszergazdák a felhasználói, akik hozzá vannak rendelve ehhez a szerepkörhöz",
- "rolesMenuTitle": "Endpoint Manager szerepkörök",
- "RoleAssignmentScopeDesc": "A szerepkör-hozzárendelésben szereplő rendszergazdák megcélozhatják a szabályzatokat, az alkalmazásokat és a távoli feladatokat",
- "RoleAssignmentScope": "Hatókörbe tartozó csoportok"
- },
+ "ScopeTags": {
+ "headerDescription": "Jelöljön ki egy vagy több csoportot, amelyet hozzá kíván rendelni a szkriptcsomaghoz."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Észlelési szkript",
+ "placeholder": "Bemeneti szkript szövege",
+ "requiredValidationMessage": "Adja meg az észlelési szkriptet"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Szkriptaláírás ellenőrzésének kényszerítése"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Szkript futtatása a bejelentkezéshez használt hitelesítő adatokkal"
+ },
+ "RemediationScript": {
+ "infoBox": "Ez a szkript csak észlelési módban fog futni, mivel nem található szervizelési szkript."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Szervizelési parancsfájl",
+ "placeholder": "Bemeneti szkript szövege"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Szkript futtatása a 64 bites PowerShellben"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Érvénytelen szkript. A szkript érvénytelen karaktereket tartalmaz."
+ },
+ "headerDescription": "Létrehozhat egy egyéni szkriptcsomagot a saját szkriptjeiből. A szkriptek alapértelmezés szerint naponta futnak a hozzárendelt eszközökön.",
+ "infoBox": "Ez a szkript írásvédett. Előfordulhat, hogy a szkript néhány beállítása le van tiltva."
+ },
+ "title": "Egyéni szkript létrehozása",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Intervallum",
+ "time": "Dátum és idő"
+ },
+ "Interval": {
+ "day": "Naponta ismétlődik",
+ "days": "{0} naponta ismétlődik",
+ "hour": "Óránként ismétlődik",
+ "hours": "{0} óránként ismétlődik",
+ "month": "Havonta ismétlődik",
+ "months": "{0} havonta ismétlődik",
+ "week": "Hetente ismétlődik",
+ "weeks": "{0} hetente ismétlődik"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{1}, {0} (UTC)",
+ "withDate": "{1}, {0}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Szerkesztés – {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Csak a kiválasztott blokkoló alkalmazások sikertelensége technikusi fázisban",
- "apps": "alkalmazások",
- "appsListName": "Alkalmazáslista",
- "blockingApps": "Blokkoló alkalmazások",
- "managedApps": "Felügyelt alkalmazások",
- "noApps": "Nincsenek alkalmazások",
- "noAppsError": "Hiba történt az alkalmazások beolvasásakor",
- "selectApps": "Alkalmazások kiválasztása",
- "selectedAppsCount": "{0} alkalmazás kiválasztva (legfeljebb 100)",
- "useSelectedAppsAll": "Az összes",
- "useSelectedAppsSelected": "Kijelölve",
- "useSelectedAppsToggleLabel": "Az eszköz használatának letiltása az alábbi kötelező alkalmazások telepítéséig, ha azok hozzá vannak rendelve a felhasználóhoz vagy az eszközhöz"
- },
- "Header": {
- "application": "Alkalmazás",
- "publisher": "Gyártó",
- "version": "Verzió"
- },
- "SearchBox": {
- "ariaLabel": "Alkalmazások keresése",
- "placeHolder": "Keresés név vagy közzétevő szerint"
- },
- "allowToUseToggle": "Az eszköz használatának engedélyezése a felhasználóknak telepítési hiba esetén",
- "blockToggle": "Az eszköz használatának letiltása az összes alkalmazás és profil telepítéséig",
- "blockToolTip": "Ha hozzáadja a Microsoft Word alkalmazást a listához, például a célzott felhasználók és eszközök nem fognak tudni elhagyni a regisztráció állapotát jelző lapot, amíg a Word sikeresen telepítve nem lett.",
- "collectLogToggle": "Naplógyűjtés és diagnosztikai oldal bekapcsolása a végfelhasználók számára",
- "create": "Profil létrehozása",
- "customMessageTextBox": "Hibaüzenet",
- "customMessageToggle": "Egyéni üzenet megjelenítése időkorlát vagy hiba esetén",
- "enableForAutopilotOnlyToggle": "Lap megjelenítése csak a kezdőélmény (OOBE) által regisztrált eszközöknek",
- "installQualityUpdatesToggle": "A Windows minőségi frissítéseinek telepítése (újraindíthatja az eszközt) (előzetes verzió)",
- "progressToggle": "Alkalmazás és profil konfigurációs folyamatának megjelenítése",
- "resetToggle": "Az eszköz alaphelyzetbe állításának engedélyezése a felhasználóknak telepítési hiba esetén",
- "timeout": "Hiba megjelenítése, ha a telepítés a (percekben) megadott időtartamnál több időt vesz igénybe"
- },
+ "OfficeUpdateChannel": {
+ "current": "Aktuális csatorna",
+ "deferred": "Féléves vállalati csatorna",
+ "firstReleaseCurrent": "Aktuális csatorna (előzetes verzió)",
+ "firstReleaseDeferred": "Féléves vállalati csatorna (előzetes verzió)",
+ "monthlyEnterprise": "Havi vállalati csatorna",
+ "placeHolder": "Válasszon egyet"
+ },
"TableHeaders": {
"activity": "Tevékenység",
"activityName": "Tevékenységnév",
@@ -1293,30 +417,175 @@
"excludedGroups": "Kizárt csoportok",
"licenseType": "Engedély típusa"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Konfigurálja a PIN-kódra és a hitelesítő adatokra vonatkozó követelményeket, amelyeknek a felhasználóknak meg kell felelniük a munkahelyi környezetben az alkalmazások eléréséhez."
- },
- "DataProtection": {
- "infoText": "Ez a csoport tartalmazza az olyan adatveszteség-megelőzési (DLP-) vezérlőket, mint például a kivágás, a másolás, a beillesztés és a mentés másként művelet korlátozásai. Ezek a beállítások határozzák meg, hogyan használhatják a felhasználók az alkalmazásokban található adatokat. "
- },
- "DeviceTypes": {
- "selectOne": "Válasszon legalább egy eszköztípust."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Az összes eszköztípuson futó alkalmazások célzása"
- },
- "infoText": "Válassza ki, hogyan szeretné ezt a szabályzatot alkalmazni az alkalmazásokban a különböző eszközökön. Ezután adjon hozzá legalább egy alkalmazást.",
- "selectOne": "Szabályzat létrehozásához legalább egy alkalmazást válasszon ki."
- }
- },
- "AssignmentAction": {
- "exclude": "Kizárva",
- "include": "Belefoglalva",
- "includeAllDevicesVirtualGroup": "Belefoglalva",
- "includeAllUsersVirtualGroup": "Belefoglalva"
- },
+ "Inputs": {
+ "accountDomain": "Fióktartomány",
+ "accountDomainHint": "pl. contosodomain",
+ "accountDomainInfoBalloon": "Adja meg a felhasználói fiók tartományát.",
+ "accountTypeInfoBalloon": "Adja meg a konfigurálandó fiók típusát a hitelesítési modell alapján",
+ "allowContactSetting": "A felhasználó módosíthatja a kapcsolattartási beállítást",
+ "allowContactSyncInfoBalloon": "Adja meg, hogy a felhasználó módosíthassa-e a kapcsolattartó-szinkronizálási beállítást",
+ "allowUserChange": "A felhasználó módosíthatja a beállításokat",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Adjon meg egy, a következőhöz hasonló csomagnevet: com.microsoft.word",
+ "androidUrlValidation": "Adjon meg egy érvényes URL-címet, például egy ehhez hasonlót: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "Alkalmazástelepítési hatókör",
+ "appUrlLabel": "Alkalmazásáruház URL-címe",
+ "appleUrlValidation": "Érvényes URL-címet adjon meg. Példa: https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Alkalmazható eszköztípus",
+ "assignmentActionLabel": "Mód",
+ "authenticationMethodInfoBalloon": "Adja meg a felhasználóhitelesítési módszert",
+ "authenticationMetod": "Hitelesítési módszer",
+ "authenticationType": "Hitelesítés típusa",
+ "authenticationTypeInfoBalloon": "Adja meg a felhasználóhitelesítési módszert",
+ "availableLicenseCount": "Rendelkezésre álló licencek",
+ "basicAuth": "Alapszintű hitelesítés",
+ "biometricsInfoBalloon": "Megkövetelheti a biometria, például TouchID vagy a FaceID használatát azoktól a felhasználóktól, akik szeretnék elérni az alkalmazást az eszközükön. Ha kötelező a használata, a felhasználóknak az ebben a profilban kiválasztott hitelesítési módszer mellett a biometriát is használniuk kell. Ezt a beállítást nem ajánlott engedélyezni, ha Intune App Protection-szabályzatok vannak érvénybe léptetve, mert az alkalmazásvédelmi szabályzat olyan hozzáférési követelményeket tartalmaz, amelyeknek a felügyelt adatok elérése előtt kell megfelelni. Ha mindkét funkció engedélyezve van, az Outlook Mobile elérésekor több hozzáférés-jóváhagyási panel jelenhet meg. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva. ",
+ "bookNameLabel": "Könyv neve",
+ "bundleDescriptionHint": "Adjon meg egy leírást, amely leírja a befoglalt alkalmazásokat.",
+ "calendar": "Naptár",
+ "categoryLabel": "Kategória",
+ "categoryNameLabel": "Alapértelmezett név",
+ "certProfileType": "Tanúsítványprofil típusa",
+ "certificate": "Tanúsítvány",
+ "certificates": "Tanúsítványok",
+ "commandLineLabel": "Parancssori argumentumok",
+ "commandLineSizeHint": "A parancssori argumentumok szövege legfeljebb 1024 karakter hosszú lehet",
+ "configurationSettingsFormatLabel": "Konfigurációs beállítások formátuma",
+ "configurationSettingsLabel": "Beállítások formátuma",
+ "contactSync": "Partnerek mentése",
+ "contactSyncInfoBalloon": "A névjegyek mobileszközön lévő natív címjegyzékbe történő mentése lehetővé teszi az új hívások és SMS-ek összekapcsolását a felhasználó meglévő Outlook-névjegyeivel. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
+ "contacts": "Kapcsolattartók",
+ "createdDateTime": "Létrehozva",
+ "defaultCategoryHint": "Az alapértelmezett kategóriák nem módosíthatók",
+ "deploySMimeCertsFromIntune": "S/MIME-tanúsítványok üzembe helyezése az Intune-ból",
+ "descriptionGenericLabel": "Leírás",
+ "descriptionHint": "Leírás megadása...",
+ "descriptionLabel": "Leírás",
+ "descriptionSizeHint": "A leírás nem lehet hosszabb 10 000 karakternél",
+ "developerLabel": "Fejlesztő",
+ "developerSizeHint": "A fejlesztő neve legfeljebb 256 karakter hosszú lehet.",
+ "disable": "Letiltás",
+ "disabled": "Letiltva",
+ "displayNameLabel": "Név",
+ "displayVersionHint": "Adja meg az alkalmazás verziószámát",
+ "displayVersionLabel": "Alkalmazásverzió",
+ "displayVersionLengthCheck": "A megjelenítési verzió hossza legfeljebb 130 karakter lehet",
+ "eBookCategoryNameLabel": "Alapértelmezett név",
+ "emailAccount": "E-mail-fiók neve",
+ "emailAccountHint": "példa: Céges e-mail",
+ "emailAccountInfoBalloon": "Adja meg az e-mail-fiók felhasználók eszközein megjelenő nevét",
+ "emailAddressAttribute": "E-mail-cím attribútuma a Microsoft Entra ID-ból",
+ "emailAddressInfoBalloon": "Adja meg az e-mailek küldésére és fogadására szolgáló e-mail-címet",
+ "emailServer": "Levelezési kiszolgáló",
+ "emailServerHint": "pl. mail.contoso.com",
+ "emailServerInfoBalloon": "Adja meg az Exchange-kiszolgáló állomásnevét",
+ "enable": "Engedélyezés",
+ "enableSMime": "S/MIME engedélyezése",
+ "enabled": "Engedélyezve",
+ "encryptAllEmails": "Az összes e-mail titkosítása",
+ "encryptionCertificates": "Titkosítási tanúsítványok",
+ "endUserNotifications": "Végfelhasználói értesítések",
+ "enrollmentTypeLabel": "Eszközregisztráció típusa",
+ "externalRecipients": "Külső címzettek e-mail-tipp",
+ "externalRecipientsInfoBalloon": "A Külső címzettek e-mail-tipp akkor jelenik meg, ha a feladó külső címzettet vagy külső címzetteket tartalmazó terjesztési csoportot ad hozzá az e-mailhez. Ez az e-mail-tipp arról tájékoztatja a feladót, hogy az adott e-mail elhagyja-e a céget. Ez megkönnyíti a szóhasználattal, a hangnemmel és a tartalommal kapcsolatos helyes döntések meghozatalát. Ez a funkció csak az Exchange Online-fiókok és a modern hibrid hitelesítést használó helyi fiókok számára érhető el. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Bekapcsolva.",
+ "focusedInbox": "Szűrt levelek",
+ "focusedInboxInfoBalloon": "A Szűrt levelek funkció két lapra választja szét beérkezett üzenetek mappáját – a Szűrt és az Egyéb lapra. A legfontosabb e-mailek a Szűrt lapon jelennek meg, míg a többi rejtve marad, de könnyen elérhető az Egyéb lapon. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Bekapcsolva. ",
+ "fullScreenEnabledLabel": "Teljes képernyő",
+ "gmailNineAmountOfEmail": "Szinkronizálandó e-mailek mennyisége",
+ "gmailNineAuthenticationMethodInfoBalloon": "Adja meg a felhasználók levelezési kiszolgálón történő hitelesítésének módját. A tanúsítványok használatával biztosíthatja a legbiztonságosabb és leggördülékenyebb felhasználói élményt a végfelhasználók számára. A tanúsítványalapú hitelesítés még nem érhető el, mert az SCEP- és PKCS-tanúsítványprofilok nem érhetők el az eszköztulajdonosi eszközök számára. ",
+ "gmailNineCertificateUPNInfoBalloon": "A tanúsítványnak a tulajdonos alternatív neveként tartalmaznia kell az egyszerű felhasználónevet.",
+ "gmailNineEmailAddressInfoBalloon": "Az Intune által a Microsoft Entra ID-ból beolvasott attribútum, amellyel dinamikusan generálható a profil e-mail-címe. Példa: Név@contoso.com (UPN). További információ az e-mail-profilok Microsoft Entra-attribútumairól.",
+ "gmailNineEmailServerInfoBalloon": "Annak a levelezési kiszolgálónak az Exchange-helye (URL-címe), amelyhez kapcsolódva a megadott alkalmazás letölti az e-maileket.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Szabályozhatja, hogy az ügyfél mennyi e-mailt szinkronizál.",
+ "gmailNineSSLInfoBalloon": "Az SSL engedélyezése a levelezési kiszolgálóval való biztonságos kommunikáció érdekében.",
+ "gmailNineUsernameInfoBalloon": "Az Intune által a Microsoft Entra ID-ból beolvasott attribútum, amellyel dinamikusan generálható a profil felhasználóneve. Példa: Név@contoso.com (UPN) vagy MyName (felhasználónév). További információ az e-mail-profilok Microsoft Entra-attribútumairól.",
+ "ignoreManifestScope": "Jegyzékfájl hatókörének figyelmen kívül hagyása",
+ "ignoreVersionDetection": "Alkalmazásverzió figyelmen kívül hagyása",
+ "informationUrlLabel": "Információs URL-cím",
+ "informationUrlSizeHint": "Az információs URL-cím legfeljebb 1024 karakter hosszú lehet.",
+ "installAsManaged": "Telepítés felügyeltként",
+ "installationSourceLabel": "Alkalmazás típusa",
+ "installerTypeInfoBalloon": "Az alkalmazáscsomag telepítőtípusa.",
+ "installerTypeLabel": "Telepítő típusa",
+ "isFeatured": "Megjelenítés kiemelt alkalmazásként a céges portálon",
+ "isMAMEnabledToggleLabel": "Igen",
+ "lastModifiedDateTime": "Utolsó frissítés időpontja",
+ "ldapUrl": "LDAP URL-cím",
+ "licensingType": "Eszközkörnyezet-hozzárendelés támogatása",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimális operációsrendszer-verzió",
+ "modernAuth": "Modern hitelesítés",
+ "nameHint": "Írjon be egy nevet.",
+ "nameLabel": "Név",
+ "nameSizeHint": "A név legfeljebb 512 karakter hosszú lehet.",
+ "notConfigured": "Nincs beállítva",
+ "notesLabel": "Megjegyzések",
+ "notesSizeHint": "A jegyzet szövege legfeljebb 1024 karakter hosszú lehet.",
+ "notificationType": "Értesítéstípus",
+ "oneDay": "Egy nap",
+ "oneMonth": "egy hónap",
+ "oneWeek": "Egy hét",
+ "outlookSMimeSettings": "Az Outlook S/MIME-beállításai",
+ "ownerLabel": "Tulajdonos",
+ "ownerSizeHint": "A tulajdonos neve legfeljebb 256 karakter hosszú lehet.",
+ "packageIdLabel": "Csomagazonosító",
+ "packageNameLabel": "Csomag neve",
+ "pivCredentialNotConfigured": "Nem választott ki a származtatott hitelesítőadatok kibocsátóját a bérlő számára. Be kell állítania egyet ahhoz, hogy sikeresen alkalmazni tudja a szabályzatot eszközökre.",
+ "platformLabel": "Platform",
+ "policyDescriptionLabel": "Leírás",
+ "policyNameLabel": "Név",
+ "preComposedIconEnabled": "Előre összeállított",
+ "primarySMTPAddress": "Elsődleges SMTP-cím",
+ "privacyUrlLabel": "Adatvédelmi URL-cím",
+ "publisherHint": "Adja meg a közzétevő nevét",
+ "publisherLabel": "Közzétevő",
+ "publisherSizeHint": "A közzétevő neve legalább 2, de legfeljebb 1024 karakterből állhat",
+ "require": "Kötelező",
+ "requireBiometrics": "Az alkalmazás eléréséhez biometria szükséges",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "Legalább egy hatókörcímke szükséges",
+ "searchAppLabel": "Adja meg az alkalmazást",
+ "searchAppLinkText": "Keresés az App Store-ban",
+ "searchWinGetPublicRepositoryLinkText": "Keresés a Windows-csomagkezelő közösségi adattárban",
+ "searchWinGetStoreRepositoryLinkText": "Keresés a Microsoft Store-alkalmazásban (új)",
+ "selectAAD": "Microsoft Entra-attribútum kiválasztása",
+ "selectAppFileLabel": "Fájl kiválasztása",
+ "selectAppFileLinkText": "Alkalmazáscsomag-fájl kiválasztása",
+ "selectAppFileToUpdateLabel": "Frissíteni kívánt fájl kiválasztása",
+ "selectAuthMethod": "Hitelesítéstípus kiválasztása",
+ "selectAuthType": "Hitelesítési típus kiválasztása",
+ "selectCatalogAppLabel": "Adja meg az alkalmazást",
+ "selectCatalogAppLinkText": "Keresés a vállalati alkalmazáskatalógusban",
+ "selectCertificate": "Válasszon tanúsítványt",
+ "signAllEmails": "Az összes e-mail aláírása",
+ "signingCertificates": "Aláíró tanúsítványok",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Csomag leírása",
+ "suiteNameLabel": "Csomag neve",
+ "targetApplicationBundleIdentifier": "Cél alkalmazáscsomag-azonosító",
+ "targetedPlatformsLabel": "Célzott platform",
+ "tasks": "Tevékenységek",
+ "threeDays": "Három nap",
+ "totalLicenseCount": "Az összes licenc",
+ "twoWeeks": "Két hét",
+ "unifiedAssignmentsLabel": "Hozzárendelés a következőhöz:",
+ "unlimited": "Korlátlan",
+ "urlHint": "Érvényes URL-t adjon meg",
+ "useManagedBrowserHint": "Csak Android és iOS rendszeren érhető el. További információ.",
+ "useManagedBrowserLabel": "Felügyelt böngésző használatának megkövetelése a hivatkozás megnyitásához",
+ "userPrinicipalName": "Egyszerű felhasználónév",
+ "username": "Felhasználónév",
+ "usernameAttribute": "Felhasználónév-attribútum Microsoft Entra ID-ból",
+ "usernameAttributreInfoBalloon": "Adja meg a fiók hitelesítésére szolgáló e-mail-profil egyszerű felhasználónevét",
+ "usernamePassword": "Felhasználónév és jelszó",
+ "webAppUrlHint": "Adjon meg egy HTTP:// vagy HTTPS:// előtaggal kezdődő érvényes URL-címet",
+ "webAppUrlLabel": "Alkalmazás URL-címe",
+ "webAppUrlSizeHint": "Az alkalmazás URL-címe legfeljebb 1024 karakter hosszú lehet.",
+ "windowsUrlValidation": "Adjon meg egy érvényes URL-címet, például: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "Megadott XML-adatok",
+ "xmlFormatInvalid": "Az XML-alapú szabályzat formátuma érvénytelen.",
+ "xmlTooLarge": "A bemenet méretének 1 MB-nál kisebbnek kell lennie."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Az érintett felhasználók a következő legmagasabb prioritású hozzárendelt közös felügyeleti lap korlátozásai alá tartoznak, vagy ha más közös felügyeleti lap nincs hozzárendelve, az alapértelmezett közös felügyeleti lap korlátozásai alá tartoznak.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Közös felügyeleti hatóság",
"settingDescription": "A közös felügyeleti beállítások határozzák meg, hogy ki birtokolja a számítási feladatokat."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise-rendszeralkalmazás",
- "androidForWorkApp": "Felügyelt Google Play Áruházbeli alkalmazás",
- "androidLobApp": "Üzletági Android-alkalmazás",
- "androidStoreApp": "Android Áruházbeli alkalmazás",
- "builtInAndroid": "Beépített Android-alkalmazás",
- "builtInApp": "Beépített alkalmazás",
- "builtInIos": "Beépített iOS-alkalmazás",
- "default": "",
- "iosIPadOSWebClip": "iOS-/iPadOS-webklip",
- "iosLobApp": "Üzletági iOS-alkalmazás",
- "iosStoreApp": "iOS Store-alkalmazás",
- "iosVppApp": "Volume Purchase Program-alkalmazás iOS rendszerhez",
- "lineOfBusinessApp": "Üzletági alkalmazás",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Üzletági macOS-alkalmazás",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365-alkalmazások (macOS)",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS-webklip",
- "macOsVppApp": "Volume Purchase Program-alkalmazás macOS rendszerhez",
- "managedAndroidLobApp": "Felügyelt üzletági Android-alkalmazás",
- "managedAndroidStoreApp": "Felügyelt Android Áruházbeli alkalmazás",
- "managedGooglePlayApp": "Felügyelt Google Play Áruházbeli alkalmazás",
- "managedGooglePlayPrivateApp": "Felügyelt privát Google Play-alkalmazás",
- "managedGooglePlayWebApp": "Felügyelt Google Play-webhivatkozás",
- "managedIosLobApp": "Felügyelt üzletági iOS-alkalmazás",
- "managedIosStoreApp": "Felügyelt iOS Store-alkalmazás",
- "microsoftStoreForBusinessApp": "A „Microsoft Store Vállalatoknak” egy alkalmazása",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store Vállalatoknak",
- "officeSuiteApp": "Microsoft 365-alkalmazások (Windows 10 és újabb)",
- "webApp": "Webhivatkozás",
- "windowsAppXLobApp": "AppX-alapú üzletági Windows-alkalmazás",
- "windowsClassicApp": "Windows-alkalmazás (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 és újabb)",
- "windowsMobileMsiLobApp": "MSI-alapú üzletági Windows-alkalmazás",
- "windowsPhone81AppXBundleLobApp": "AppX-alapú üzletági Windows Phone 8.1-alkalmazás",
- "windowsPhone81AppXLobApp": "AppX-alapú üzletági Windows Phone 8.1-alkalmazás",
- "windowsPhone81StoreApp": "Windows Phone 8.1 Áruházbeli alkalmazás",
- "windowsPhoneXapLobApp": "XAP-alapú üzletági Windows Phone-alkalmazás",
- "windowsStoreApp": "Microsoft Store-alkalmazás (örökölt)",
- "windowsUniversalAppXLobApp": "Univerzális AppX-alapú üzletági Windows-alkalmazás",
- "windowsUniversalLobApp": "Univerzális üzletági Windows-alkalmazás",
- "windowsWebApp": "Windows webes hivatkozás"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Ajánlott frissítések",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrein",
+ "countryNameZA": "Dél-afrikai Köztársaság",
+ "countryNameJO": "Jordánia",
+ "countryNameSD": "Szudán",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Cseh Köztársaság",
+ "countryNameLT": "Litvánia",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hongkong KKT",
+ "countryNameGH": "Ghána",
+ "countryNameSA": "Szaúd-Arábia",
+ "countryNamePG": "Pápua Új-Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "India",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Románia",
+ "countryNameKZ": "Kazahsztán",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Grúzia",
+ "countryNameTT": "Trinidad és Tobago",
+ "countryNameMP": "Északi Mariana-szigetek",
+ "countryNameMV": "Maldív-szigetek",
+ "countryNameFI": "Finnország",
+ "countryNameNO": "Norvégia",
+ "countryNameEE": "Észtország",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Üzbegisztán",
+ "countryNameME": "Montenegró",
+ "countryNameTJ": "Tádzsikisztán",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "Franciaország",
+ "countryNameOM": "Omán",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Olaszország",
+ "countryNameAZ": "Azerbajdzsán",
+ "countryNameKG": "Kirgizisztán",
+ "countryNameWF": "Wallis és Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falkland-szigetek (Malvin-szigetek)",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "Dél-Szudán",
+ "countryNameMM": "Mianmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Szíria",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "Saint Vincent és Grenadine-szigetek",
+ "countryNameID": "Indonézia",
+ "countryNameRE": "Réunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "Észak-Macedónia",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Francia Polinézia",
+ "countryNameKY": "Kajmán-szigetek",
+ "countryNameIO": "Brit indiai-óceáni terület",
+ "countryNameRU": "Oroszország",
+ "countryNameMA": "Marokkó",
+ "countryNameAU": "Ausztrália",
+ "countryNameBO": "Bolívia",
+ "countryNameVA": "Szentszék (Vatikán)",
+ "countryNameVG": "Brit Virgin-szigetek",
+ "countryNameFM": "Mikronézia",
+ "countryNameAQ": "Antarktika",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brazília",
+ "countryNameIS": "Izland",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgária",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltár",
+ "countryNameBS": "Bahama-szigetek",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Makaó (KKT)",
+ "countryNameRW": "Ruanda",
+ "countryNameAS": "Amerikai Szamoa",
+ "countryNameBQ": "Bonaire, Sint Eustatius és Saba",
+ "countryNameMF": "Saint-Martin",
+ "countryNameTM": "Türkmenisztán",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Új-Kaledónia",
+ "countryNameAC": "Ascension-sziget",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Banglades",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Kanada",
+ "countryNameSH": "Szent Ilona",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongólia",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Kamerun",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japán",
+ "countryNameCY": "Ciprus",
+ "countryNameCD": "Kongói Demokratikus Köztársaság",
+ "countryNameTN": "Tunézia",
+ "countryNameTR": "Törökország",
+ "countryNameWS": "Szamoa",
+ "countryNameSE": "Svédország",
+ "countryNameXK": "Koszovó",
+ "countryNameKH": "Kambodzsa",
+ "countryNamePL": "Lengyelország",
+ "countryNameDZ": "Algéria",
+ "countryNameLR": "Libéria",
+ "countryNameSO": "Szomália",
+ "countryNameDM": "Dominika",
+ "countryNameEG": "Egyiptom",
+ "countryNameGF": "Francia Guyana",
+ "countryNameNZ": "Új-Zéland",
+ "countryNamePS": "Palesztin Hatóság",
+ "countryNameIL": "Izrael",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Görögország",
+ "countryNameNG": "Nigéria",
+ "countryNameMR": "Mauritánia",
+ "countryNameVI": "Amerikai Virgin-szigetek",
+ "countryNameGQ": "Egyenlítői-Guinea",
+ "countryNameMX": "Mexikó",
+ "countryNameDJ": "Dzsibuti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "Kína",
+ "countryNameMZ": "Mozambik",
+ "countryNameBV": "Bouvet-sziget",
+ "countryNameNF": "Norfolk-sziget",
+ "countryNameTZ": "Tanzánia",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "Déli-Georgia és Déli-Sandwich-szigetek",
+ "countryNameRS": "Szerbia",
+ "countryNameCC": "Cocos (Keeling)-szigetek",
+ "countryNameNA": "Namíbia",
+ "countryNameDE": "Németország",
+ "countryNameCG": "Kongói Köztársaság",
+ "countryNameKW": "Kuvait",
+ "countryNameMH": "Marshall-szigetek",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarusz",
+ "countryNameMY": "Malajzia",
+ "countryNameST": "São Tomé és Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Csád",
+ "countryNameCX": "Karácsony-sziget",
+ "countryNameIR": "Irán",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Bissau-Guinea",
+ "countryNameUA": "Ukrajna",
+ "countryNameCU": "Kuba",
+ "countryNameCO": "Kolumbia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Horvátország",
+ "countryNameSC": "Seychelle-szigetek",
+ "countryNameNL": "Hollandia",
+ "countryNameUM": "Egyesült Államok lakatlan külbirtokai",
+ "countryNameIM": "Man-sziget",
+ "countryNameFJ": "Fidzsi-szigetek",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laosz",
+ "countryNameGB": "Egyesült Királyság",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Szlovénia",
+ "countryNameAM": "Örményország",
+ "countryNameAR": "Argentína",
+ "countryNamePM": "Saint-Pierre és Miquelon",
+ "countryNameTF": "Francia déli területek és a déli sarkvidék",
+ "countryNameDO": "Dominikai Köztársaság",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugália",
+ "countryNameCF": "Közép-afrikai Köztársaság",
+ "countryNameBE": "Belgium",
+ "countryNameKM": "Comore-szigetek",
+ "countryNameLY": "Líbia",
+ "countryNameIE": "Írország",
+ "countryNameKP": "Észak-Korea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Szlovákia",
+ "countryNameTC": "Turks- és Caicos-szigetek",
+ "countryNameNP": "Nepál",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Jemen",
+ "countryNameBA": "Bosznia-Hercegovina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Irak",
+ "countryNameSJ": "Svalbard és Jan Mayen-sziget",
+ "countryNameAX": "Åland-szigetek",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Feröer-szigetek",
+ "countryNameBL": "Saint-Barthélemy",
+ "countryNameLB": "Libanon",
+ "countryNameJM": "Jamaica",
+ "countryNameAF": "Afganisztán",
+ "countryNameES": "Spanyolország",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Szingapúr",
+ "countryNameAL": "Albánia",
+ "countryNameSN": "Szenegál",
+ "countryNameSZ": "Szváziföld",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d'Ivoire",
+ "countryNameTW": "Tajvan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cook-szigetek",
+ "countryNameTH": "Thaiföld",
+ "countryNameHM": "Heard-sziget és McDonald-szigetek",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "Egyesült Államok",
+ "countryNameAT": "Ausztria",
+ "countryNameKR": "Koreai Köztársaság",
+ "countryNamePK": "Pakisztán",
+ "countryNameDK": "Dánia",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Etiópia",
+ "countryNameMG": "Madagaszkár",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxemburg",
+ "countryNameQA": "Katar",
+ "countryNameBT": "Bhután",
+ "countryNameSB": "Salamon-szigetek",
+ "countryNameAE": "Egyesült Arab Emírségek",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua és Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Magyarország",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Svájc",
+ "countryNamePN": "Pitcairn-szigetek",
+ "countryNameGL": "Grönland",
+ "countryNamePH": "Fülöp-szigetek",
+ "countryNameMT": "Málta",
+ "countryNameKN": "Saint Kitts és Nevis",
+ "countryNameLK": "Srí Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Lettország",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Szerző",
+ "template": "Sablon neve"
+ },
+ "Row": {
+ "ariaLabel": "{1} oszlop {2} {0}. sora"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Kezdje elölről, és válassza ki a kívánt tulajdonságokat a rendelkezésre álló leltártulajdonságok könyvtárából"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Kezdje elölről, és válassza ki a kívánt beállításokat a rendelkezésre álló beállítások könyvtárából",
+ "title": "Beállításkatalógus"
+ },
+ "Templates": {
+ "subtitle": "A sablonok funkciók szerint rendszerezve tartalmazzák a beállítások csoportjait. Akkor használjon sablont, ha nem szeretné manuálisan létrehozni a szabályzatokat, vagy hozzáférést szeretne adni az eszközöknek a vállalati hálózatokhoz, például Wi-Fi- vagy VPN-hálózathoz",
+ "title": "Sablonok"
+ },
+ "noData": "Nem találhatók szabályzatsablonok"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge alkalmazás által ajánlott SmartScreen-beállítások: Windows 10 a felhőkonfigurációs sablonban. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Végpontészlelés és -válasz"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "Alkalmazás- és böngészőelkülönítés",
+ "aSRApplicationControl": "Alkalmazásvezérlés",
+ "aSRAttackSurfaceReduction": "A támadási felület csökkentésére szolgáló szabályok",
+ "aSRDeviceControl": "Eszközvezérlés",
+ "aSRExploitProtection": "Biztonsági rés kiaknázása elleni védelem",
+ "aSRWebProtection": "Webes védelem (Microsoft Edge régi verziója)",
+ "aVExclusions": "Microsoft Defender víruskereső – kizárások",
+ "antivirus": "Microsoft Defender víruskereső",
+ "cloudPC": "Windows 365 – biztonsági alapkonfiguráció",
+ "default": "Végpontbiztonság",
+ "defenderTest": "Microsoft Defender végponthoz – bemutató",
+ "diskEncryption": "BitLocker",
+ "eDR": "Végpontészlelés és -válasz",
+ "edgeSecurityBaseline": "Microsoft Edge-alapértékek",
+ "edgeSecurityBaselinePreview": "Előzetes verzió: Microsoft Edge-alapértékek",
+ "editionUpgradeConfiguration": "Kiadásfrissítés és módváltás",
+ "firewall": "Windows tűzfal",
+ "firewallRules": "Windows tűzfalszabályok",
+ "identityProtection": "Fiókvédelem",
+ "identityProtectionPreview": "Fiókvédelem (előzetes verzió)",
+ "mDMSecurityBaseline1810": "MDM biztonsági alapkonfiguráció Windows 10-es és újabb rendszerekhez 2018 október",
+ "mDMSecurityBaseline1810Preview": "Előzetes verzió: MDM biztonsági alapkonfiguráció Windows 10-es és újabb rendszerekhez 2018 október",
+ "mDMSecurityBaseline1810PreviewBeta": "Előzetes verzió: MDM biztonsági alapkonfiguráció Windows 10-es rendszerhez 2018 október (bétaverzió)",
+ "mDMSecurityBaseline1906": "MDM biztonsági alapkonfiguráció Windows 10-es és újabb rendszerekhez 2019 május",
+ "mDMSecurityBaseline2004": "MDM biztonsági alapkonfiguráció Windows 10-es és újabb rendszerekhez 2020 augusztus",
+ "mDMSecurityBaseline2101": "MDM biztonsági alapkonfiguráció Windows 10 és újabb rendszerekhez – 2020. december",
+ "macOSAntivirus": "Vírusvédelem",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS-tűzfal",
+ "microsoftDefenderBaseline": "Microsoft Defender végponthoz – alapkonfiguráció",
+ "office365Baseline": "Microsoft Office O365-alapkonfiguráció",
+ "office365BaselinePreview": "Előzetes verzió: Microsoft Office O365 alapkonfiguráció",
+ "securityBaselines": "Biztonsági alapkonfigurációk",
+ "test": "Tesztsablon",
+ "testFirewallRulesSecurityTemplateName": "Windows tűzfalszabályok (teszt)",
+ "testIdentityProtectionSecurityTemplateName": "Fiókvédelem (teszt)",
+ "windowsSecurityExperience": "A Windows Biztonság felhasználói élménye"
+ },
+ "Firewall": {
+ "mDE": "Windows tűzfal"
+ },
+ "FirewallRules": {
+ "mDE": "Windows tűzfalszabályok"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "A OneDrive ismert mappaáthelyezési beállításai: Windows 10 a felhőkonfigurációs sablonban. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Fiókvédelem",
+ "administrativeTemplates": "Felügyeleti sablonok",
+ "androidCompliancePolicy": "Androidos megfelelőségi szabályzat",
+ "aospDeviceOwnerCompliancePolicy": "Androidos (AOSP) megfelelőségi szabályzat",
+ "applicationControl": "App Control for Business",
+ "attackSurfaceReductionRules": "Támadási felület csökkentésére szolgáló szabályok",
+ "bitlocker": "BitLocker",
+ "custom": "Egyéni",
+ "deliveryOptimization": "Kézbesítésoptimalizálás",
+ "derivedPersonalIdentityVerificationCredential": "Származtatott hitelesítő adat",
+ "deviceControl": "Eszközvezérlés",
+ "deviceFeatures": "Eszközfunkciók",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Eszközzárolás",
+ "deviceOwner": "Teljes mértékben felügyelt, dedikált, vállalati tulajdonban lévő munkahelyi profil",
+ "deviceRestrictions": "Eszközkorlátozások",
+ "deviceRestrictionsWindows10Team": "Eszközkorlátozások (Windows 10 Team)",
+ "domainJoinPreview": "Csatlakozás tartományhoz",
+ "editionUpgradeAndModeSwitch": "Kiadásfrissítés és módváltás",
+ "education": "Oktatás",
+ "email": "E-mail",
+ "emailSamsungKnoxOnly": "E-mail (csak Samsung KNOX)",
+ "endpointProtection": "Endpoint Protection",
+ "expeditedCheckin": "Mobileszköz-kezelés konfigurációja",
+ "exploitProtection": "Biztonsági rés kiaknázása elleni védelem",
+ "extensions": "Bővítmények",
+ "hardwareConfigurations": "BIOS-konfigurációk és egyéb beállítások",
+ "identityProtection": "Identitásvédelem",
+ "iosCompliancePolicy": "iOS-es megfelelőségi szabályzat",
+ "kiosk": "Kioszkmód",
+ "localUsersAndGroups": "Felhasználói csoporttagság szerkesztése",
+ "macCompliancePolicy": "Mac-es megfelelőségi szabályzat",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Nagyvállalati Microsoft 365-alkalmazások biztonsági alapja",
+ "microsoftDefenderAntivirus": "Microsoft Defender víruskereső",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender víruskereső – kizárások",
+ "microsoftDefenderAtpWindows10Desktop": "Végponthoz készült Microsoft Defender (Windows 10-es vagy újabb operációs rendszert futtató asztali eszközökhöz)",
+ "microsoftDefenderFirewallRules": "Windows tűzfalszabályok",
+ "microsoftDefenderforEndpointSecurityBaseline": "A Végponthoz készült Microsoft Defender biztonsági alapja",
+ "microsoftEdgeBaseline": "Biztonsági alap a Microsoft Edge-hez",
+ "mxProfileZebraOnly": "MX-profil (csak Zebra)",
+ "networkBoundary": "Hálózathatár",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Csoportházirend felülbírálása",
+ "pkcsCertificate": "PKCS-tanúsítvány",
+ "pkcsImportedCertificate": "Importált PKCS-tanúsítvány",
+ "preferenceFile": "Preferenciafájl",
+ "presets": "Előzetes beállítások",
+ "scepCertificate": "SCEP-tanúsítvány",
+ "secureAssessmentEducation": "Biztonságos értékelés (Azure for Education)",
+ "securityBaselineForHololens2Advanced": "A HoloLens 2 speciális biztonsági alapkonfigurációja",
+ "securityBaselineForHololens2Standard": "A HoloLens 2 standard biztonsági alapkonfigurációja",
+ "securityBaselineForMicrosoftEdge": "Biztonsági alap a Microsoft Edge-hez",
+ "settingsCatalog": "Beállításkatalógus",
+ "sharedMultiUserDevice": "Megosztott többfelhasználós eszköz",
+ "softwareUpdates": "Szoftverfrissítések",
+ "trustedCertificate": "Megbízható tanúsítvány",
+ "unknown": "Ismeretlen",
+ "unsupported": "Nem támogatott",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi importálás",
+ "windows10CompliancePolicy": "Windows 10/11-es megfelelőségi házirend",
+ "windows10MobileCompliancePolicy": "Windows 10 Mobile-os megfelelőségi szabályzat",
+ "windows10XScep": "SCEP-tanúsítvány – TESZT",
+ "windows10XTrustedCertificate": "Megbízható tanúsítvány – TESZT",
+ "windows10XVPN": "VPN – TESZT",
+ "windows10XWifi": "WI-FI – TESZT",
+ "windows11SecurityBaseline": "Biztonsági alapkonfiguráció Windows 10 és újabb rendszerekhez",
+ "windows365SecurityBaseline": "Windows 365 – biztonsági alapkonfiguráció",
+ "windows8CompliancePolicy": "Windows 8-as megfelelőségi szabályzat",
+ "windowsHealthMonitoring": "Windows-állapotmonitorozás",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Windows Phone-os megfelelőségi szabályzat",
+ "windowsUpdateforBusiness": "Windows Update Vállalatoknak",
+ "wiredNetwork": "Vezetékes hálózat",
+ "workProfile": "Személyes tulajdonban lévő munkahelyi profil"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "A frissítés fokozatosan legyen elérhető",
+ "immediateStart": "A frissítés a lehető leghamarabb legyen elérhető",
+ "startDateOnly": "A frissítés egy adott dátumtól legyen elérhető"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Automatikus elutasítás",
+ "autoGrant": "Automatikus engedélyezés",
+ "prompt": "Rákérdezés"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Tartózkodási hely felhasználása (durva)",
+ "accessFineLocation": "Tartózkodási hely felhasználása (finom)",
+ "addVoicemail": "Hangposta hozzáadása",
+ "bodySensors": "Testérzékelők adatainak engedélyezése",
+ "bodySensorsBackground": "Háttérbeli testérzékelői adatok engedélyezése",
+ "callPhone": "Hívásindítás",
+ "camera": "Kamera",
+ "getAccounts": "Fiókok beolvasása",
+ "nearbyDevices": "Közeli eszközök",
+ "nearbyWifiDevices": "Közeli WiFi-eszközök",
+ "postNotifications": "Bejegyzés-értesítések",
+ "processOutgoingCalls": "Kimenő hívások feldolgozása",
+ "readCalendar": "Naptár (olvasás)",
+ "readCallLog": "Hívásnapló (olvasás)",
+ "readContacts": "Névjegyek (olvasás)",
+ "readExternalStorage": "Külső tároló (olvasás)",
+ "readMediaAudio": "Médiahang (olvasás)",
+ "readMediaImages": "Médiaképek (olvasás)",
+ "readMediaVideo": "Médiavideó (olvasás)",
+ "readPhoneState": "Telefon állapota (olvasás)",
+ "readSMS": "SMS (olvasás)",
+ "receiveMMS": "MMS (fogadás)",
+ "receiveSMS": "SMS (fogadás)",
+ "receiveWAPPush": "WAP-alapú leküldéses üzenetek (fogadás)",
+ "recordAudio": "Hangrögzítés",
+ "sendSMS": "SMS (küldés)",
+ "useSIP": "SIP-szolgáltatás használata",
+ "writeCalendar": "Naptár (írás)",
+ "writeCallLog": "Hívásnapló (írás)",
+ "writeContacts": "Névjegyek (írás)",
+ "writeExternalStorage": "Külső tároló (írás)"
+ },
+ "RemoveDialog": {
+ "description": "Biztos, hogy eltávolítja az engedélyt?",
+ "title": "Eltávolítás"
+ },
+ "TableHeader": {
+ "permission": "Engedély",
+ "permissionGroup": "Engedélycsoport",
+ "permissionName": "Engedély neve",
+ "permissionState": "Engedély állapota"
+ },
+ "addButtonLabel": "+Hozzáadás",
+ "addPermissionTableDescription": "Adja meg az engedélyeket, melyeket szeretne felülbírálni. Ha azok nincsenek explicit módon kiválasztva vagy megadva, az alapértelmezett működés lesz érvényes.",
+ "addPermissionsTitle": "Engedélyek hozzáadása",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "További információk az Android futtatókörnyezetének engedélyeiről",
+ "permissionTableDescription": "Az itt megadott engedélyek felülbírálják az Alapértelmezett alkalmazásengedélyek szabályzatot a kijelölt alkalmazások számára.",
+ "permissionsTitle": "Engedélyek"
+ },
+ "AssignmentAction": {
+ "exclude": "Kizárva",
+ "include": "Belefoglalva",
+ "includeAllDevicesVirtualGroup": "Belefoglalva",
+ "includeAllUsersVirtualGroup": "Belefoglalva"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Keresés alapértelmezettként",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype Vállalati verzió",
+ "oneDrive": "Asztali OneDrive",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "A fájl vagy a mappa mint kiválasztott követelmény.",
+ "pathToolTip": "Az észlelendő fájl vagy mappa teljes elérési útja.",
+ "property": "Tulajdonság",
+ "valueToolTip": "Válasszon olyan követelményértéket, amely megfelel a választott észlelési módszernek. A dátum és idő követelményét a helyi formátumban kell megadni."
+ },
+ "GridColumns": {
+ "pathOrScript": "Elérési út vagy szkript",
+ "type": "Típus"
+ },
+ "Registry": {
+ "keyPath": "Kulcs elérési útja",
+ "keyPathTooltip": "A követelményként szolgáló értéket tartalmazó beállításjegyzék-bejegyzés teljes elérési útja.",
+ "operator": "Operátor",
+ "operatorTooltip": "Válassza ki az operátort az összehasonlításhoz.",
+ "registryRequirement": "Beállításkulcsra vonatkozó követelmény",
+ "registryRequirementTooltip": "Válassza ki a beállításkulcsra vonatkozó követelmények összehasonlításának módját.",
+ "valueName": "Azonosítónév",
+ "valueNameTooltip": "A szükséges beállításjegyzék-érték neve."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Fájl",
+ "registry": "Beállításjegyzék",
+ "script": "Szkript"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Logikai érték",
+ "dateTime": "Dátum és idő",
+ "float": "Lebegőpontos szám",
+ "integer": "Egész szám",
+ "string": "Sztring",
+ "version": "Verzió"
+ },
+ "duplicateName": "A(z) {0} szkriptnév már használatban van. Adjon meg egy másik nevet.",
+ "enforceSignatureCheck": "Szkriptaláírás ellenőrzésének kényszerítése",
+ "enforceSignatureCheckTooltip": "Az „Igen” lehetőség kiválasztásával ellenőrizheti, hogy a szkriptet egy megbízható gyártó írta-e alá, így a szkript figyelmeztetések és felszólítások megjelenítése nélkül fog futni. A szkript letiltás nélkül fog futni. A „Nem” (ez az alapértelmezett beállítás) kiválasztásakor a szkript végfelhasználói megerősítéssel, de az aláírás ellenőrzése nélkül fut.",
+ "loggedOnCredentials": "Szkript futtatása a bejelentkezéshez használt hitelesítő adatokkal",
+ "loggedOnCredentialsTooltip": "Szkript futtatása a bejelentkezett eszköz hitelesítő adataival.",
+ "operatorTooltip": "Válassza ki az operátort a követelmények összehasonlításához.",
+ "requirementMethod": "Kimeneti adattípus kiválasztása...",
+ "requirementMethodTooltip": "Válassza ki, hogy a rendszer melyik adattípust használja az észlelési egyezési követelmények meghatározásakor.",
+ "scriptContent": "Szkript tartalma",
+ "scriptFile": "Parancsfájl",
+ "scriptFileTooltip": "Válasszon egy PowerShell-szkriptet, amely észleli majd az alkalmazás jelenlétét az ügyfélen. Ha a rendszer észleli az alkalmazást, a követelményfolyamat egy 0 értékű kilépési kódot ad vissza, és sztringértéket ír az STDOUT elembe.",
+ "scriptName": "Szkript neve",
+ "value": "Érték",
+ "valueTooltip": "Válasszon olyan követelményértéket, amely megfelel a választott észlelési módszernek. A dátum és idő követelményét a helyi formátumban kell megadni."
+ },
+ "bladeTitle": "Követelményszabály hozzáadása",
+ "createRequirementHeader": "Követelmény létrehozása",
+ "header": "További követelményszabályok konfigurálása",
+ "label": "További követelményszabályok",
+ "noRequirementsSelectedPlaceholder": "Nincsenek megadva követelmények.",
+ "requirementType": "Követelmény típusa",
+ "requirementTypeTooltip": "Válassza ki a követelmény érvényesítésének meghatározásához használt észlelési módszert."
+ },
+ "architectures": "Operációs rendszer architektúrája",
+ "architecturesTooltip": "Válassza ki az alkalmazás telepítéséhez szükséges architektúrákat.",
+ "bladeTitle": "Követelmények",
+ "diskSpace": "Szükséges lemezterület (MB)",
+ "diskSpaceTooltip": "Az alkalmazás telepítéséhez szabad lemezterület szükséges a rendszermeghajtón.",
+ "header": "Adja meg, milyen követelményeknek kell megfelelnie az eszközöknek az alkalmazás telepítése előtt:",
+ "maximumTextFieldValue": "A maximális érték {0}.",
+ "minimumCpuSpeed": "Szükséges minimális processzorsebesség (MHz)",
+ "minimumCpuSpeedTooltip": "Az alkalmazás telepítéséhez szükséges minimális CPU-sebesség.",
+ "minimumLogicalProcessors": "Logikai processzorok szükséges minimális száma",
+ "minimumLogicalProcessorsTooltip": "Az alkalmazás telepítéséhez szükséges logikai processzorok minimális száma.",
+ "minimumOperatingSystem": "Minimális operációsrendszer-verzió",
+ "minimumOperatingSystemTooltip": "Válassza ki az alkalmazás telepítéséhez szükséges minimális operációs rendszert.",
+ "minumumTextFieldValue": "A minimális érték {0}.",
+ "physicalMemory": "Szükséges fizikai memória (MB)",
+ "physicalMemoryTooltip": "Az alkalmazás telepítéséhez szükséges fizikai memória (RAM).",
+ "selectorLabel": "Követelmények",
+ "validNumber": "Adjon meg egy érvényes számot."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Szűrő",
+ "assignmentFilterTypeColumnHeader": "Szűrési mód",
+ "assignmentToast": "Végfelhasználói értesítések",
+ "assignmentTypeTableHeader": "HOZZÁRENDELÉS TÍPUSA",
+ "autoUpdate": "Automatikus frissítés",
+ "deadlineTimeColumnLabel": "Telepítési határidő",
+ "deliveryOptimizationPriorityHeader": "Szállítás optimalizálásának prioritása",
+ "groupTableHeader": "Csoport",
+ "installContextLabel": "Környezet telepítése",
+ "isRemovable": "Telepítés cserélhetőként",
+ "licenseTypeLabel": "Engedély típusa",
+ "modeTableHeader": "Csoport mód",
+ "policySet": "Szabályzatkészlet",
+ "preventAutoAppUpdate": "Automatikus alkalmazásfrissítések megakadályozása",
+ "preventManagedAppBackup": "Az iCloud-alkalmazások biztonsági mentésének megakadályozása",
+ "restartGracePeriodHeader": "Türelmi időszak újraindítása",
+ "startTimeColumnLabel": "Rendelkezésre állás",
+ "tracks": "Nyomkövetések",
+ "uninstallOnRemoval": "Eltávolítás az eszköz törlésekor",
+ "updateMode": "Prioritás frissítése",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD-webalkalmazás",
+ "androidEnterpriseSystemApp": "Android Enterprise-rendszeralkalmazás",
+ "androidForWorkApp": "Felügyelt Google Play Áruházbeli alkalmazás",
+ "androidLobApp": "Üzletági Android-alkalmazás",
+ "androidStoreApp": "Android Áruházbeli alkalmazás",
+ "builtInAndroid": "Beépített Android-alkalmazás",
+ "builtInApp": "Beépített alkalmazás",
+ "builtInIos": "Beépített iOS-alkalmazás",
+ "iosIPadOSWebClip": "iOS/iPadOS-webklip",
+ "iosLobApp": "Üzletági iOS-alkalmazás",
+ "iosStoreApp": "iOS Store-alkalmazás",
+ "iosVppApp": "Volume Purchase Program-alkalmazás iOS rendszerhez",
+ "lineOfBusinessApp": "Üzletági alkalmazás",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Üzletági macOS-alkalmazás",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office programcsomag",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS-webklip",
+ "macOsVppApp": "Volume Purchase Program-alkalmazás macOS rendszerhez",
+ "managedAndroidLobApp": "Felügyelt üzletági Android-alkalmazás",
+ "managedAndroidStoreApp": "Felügyelt Android Áruházbeli alkalmazás",
+ "managedGooglePlayApp": "Felügyelt Google Play Áruházbeli alkalmazás",
+ "managedGooglePlayPrivateApp": "Felügyelt privát Google Play-alkalmazás",
+ "managedGooglePlayWebApp": "Felügyelt Google Play-webhivatkozás",
+ "managedIosLobApp": "Felügyelt üzletági iOS-alkalmazás",
+ "managedIosStoreApp": "Felügyelt iOS Store-alkalmazás",
+ "microsoftStoreForBusinessApp": "A „Microsoft Store Vállalatoknak” egy alkalmazása",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store Vállalatoknak",
+ "officeAddIn": "Office-bővítmény",
+ "officeSuiteApp": "Microsoft 365-alkalmazások (Windows 10 és újabb)",
+ "sharePointApp": "SharePoint-app",
+ "teamsApp": "Teams alkalmazás",
+ "webApp": "Webhivatkozás",
+ "win32CatalogApp": "Windows katalógusalkalmazás (Win32)",
+ "winGetPublicApp": "Windows-csomagkezelő közösségi adattár",
+ "winGetStoreApp": "Microsoft Store-alkalmazás (új)",
+ "windowsAppXLobApp": "AppX-alapú üzletági Windows-alkalmazás",
+ "windowsClassicApp": "Windows-alkalmazás (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 és újabb)",
+ "windowsMobileMsiLobApp": "MSI-alapú üzletági Windows-alkalmazás",
+ "windowsPhone81AppXBundleLobApp": "AppX-alapú üzletági Windows Phone 8.1-alkalmazás",
+ "windowsPhone81AppXLobApp": "AppX-alapú üzletági Windows Phone 8.1-alkalmazás",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 Áruházbeli alkalmazás",
+ "windowsPhoneXapLobApp": "XAP-alapú üzletági Windows Phone-alkalmazás",
+ "windowsStoreApp": "Microsoft Store-alkalmazás (örökölt)",
+ "windowsUniversalAppXLobApp": "Univerzális AppX-alapú üzletági Windows-alkalmazás",
+ "windowsUniversalLobApp": "Univerzális üzletági Windows-alkalmazás",
+ "windowsWebApp": "Windows webes hivatkozás"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Kizárva",
+ "include": "Belefoglalva",
+ "includeAllDevicesVirtualGroup": "Belefoglalva",
+ "includeAllUsersVirtualGroup": "Belefoglalva"
+ },
+ "AssignmentToast": {
+ "hideAll": "Az összes bejelentési értesítés elrejtése",
+ "showAll": "Az összes bejelentési értesítés megjelenítése",
+ "showReboot": "A számítógép-újraindításokra vonatkozó bejelentési értesítések megjelenítése"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Igen",
+ "notConfigured": "Nem"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Háttér",
+ "displayText": "Tartalom letöltése a következőben: {0}",
+ "foreground": "Előtér",
+ "header": "Szállítás optimalizálásának prioritása"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Az alkalmazás telepítése kényszerítheti az eszköz újraindítását",
+ "basedOnReturnCode": "Viselkedés meghatározása a visszatérési kódok alapján",
+ "force": "Az Intune az eszköz kötelező újraindítását kezdeményezi",
+ "suppress": "Nincs megadott művelet"
+ },
+ "FilterType": {
+ "exclude": "Kizárás",
+ "include": "Belefoglalás",
+ "none": "Nincs"
+ },
+ "InstallIntent": {
+ "available": "Regisztrált eszközök esetében elérhető",
+ "availableWithoutEnrollment": "Regisztrációval vagy anélkül is elérhető",
+ "notApplicable": "Nem alkalmazható",
+ "required": "Kötelező",
+ "uninstall": "Eltávolítás"
+ },
+ "SettingType": {
+ "assignmentType": "Hozzárendelés típusa",
+ "deviceLicensing": "Engedély típusa",
+ "installContext": "Eltávolítás az eszköz törlésekor",
+ "toastSettings": "Végfelhasználói értesítések",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Alapértelmezett",
+ "postponed": "Elhalasztva",
+ "priority": "Magas prioritás"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Sikertelen",
+ "hardReboot": "Hardveres újraindítás",
+ "retry": "Újra",
+ "softReboot": "Szoftveres újraindítás",
+ "success": "Sikeres"
+ },
+ "Columns": {
+ "codeType": "Kód típusa",
+ "returnCode": "Visszatérési kód"
+ },
+ "bladeTitle": "Visszatérési kódok",
+ "gridAriaLabel": "Visszatérési kódok",
+ "header": "Adja meg a visszatérési kódokat a telepítés utáni viselkedés jelzéséhez:",
+ "onAddAnnounceMessage": "Visszatérési kód – {0} hozzáadott elem, összesen: {1}",
+ "onDeleteSuccess": "A visszatérési {0} kód sikeresen törölve",
+ "returnCodeAlreadyUsedValidation": "A visszatérési kód már használatban van.",
+ "returnCodeMustBeIntegerValidation": "A visszatérési kódnak egész számnak kell lennie.",
+ "returnCodeShouldBeAtLeast": "A visszatérési kódnak legalább {0} értéknek kell lennie.",
+ "returnCodeShouldBeAtMost": "A visszatérési kódnak legfeljebb {0} értéknek kell lennie.",
+ "selectorLabel": "Visszatérési kódok"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone és iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Hálózati határ hozzáadása",
+ "addNetworkBoundaryButton": "Hálózati határ hozzáadása...",
+ "allowWindowsSearch": "A titkosított céges adatok és az áruházbeli alkalmazások keresésének engedélyezése a Windows Search szolgáltatás számára",
+ "authoritativeIpRanges": "A vállalati IP-címtartományok listája mérvadó (nincs automatikus észlelés)",
+ "authoritativeProxyServers": "A vállalati proxykiszolgálók listája mérvadó (nincs automatikus észlelés)",
+ "boundaryType": "Határ típusa",
+ "cloudResources": "Felhőerőforrások",
+ "corporateIdentity": "Céges identitás",
+ "dataRecoveryCert": "A titkosított adatok helyreállításának engedélyezéséhez töltsön fel egy adat-helyreállítási megbízotti (DRA-) tanúsítványt",
+ "editNetworkBoundary": "Hálózati határ szerkesztése",
+ "enrollmentState": "Regisztráció állapota",
+ "iPv4Ranges": "IPv4-tartományok",
+ "iPv6Ranges": "IPv6-tartományok",
+ "internalProxyServers": "Belső proxykiszolgálók",
+ "maxInactivityTime": "Az eszköz által inaktív állapotban eltöltött idő (percben), amelynek elteltével a PIN-kóddal vagy jelszóval feloldható zárolás bekapcsol",
+ "maxPasswordAttempts": "Ennyi sikertelen hitelesítési kísérlet után lesz törölve az eszköz tartalma",
+ "mdmDiscoveryUrl": "MDM-felderítési URL-cím",
+ "mdmRequiredSettingsInfo": "Ez a szabályzat csak a Windows 10 évfordulós kiadására vagy újabb kiadásaira érvényes. A szabályzat a Windows Information Protection (WIP) segítségével biztosítja a védelmi funkciókat.",
+ "minimumPinLength": "Adja meg a PIN kód minimális hosszát karakterben",
+ "name": "Név",
+ "networkBoundariesGridEmptyText": "Itt fog megjelenni minden hozzáadott hálózati határ",
+ "networkBoundary": "Hálózathatár",
+ "networkDomainNames": "Hálózati tartományok",
+ "neutralResources": "Semleges erőforrások",
+ "passportForWork": "A Vállalati Windows Hello használata a Windowsba való bejelentkezéshez",
+ "pinExpiration": "Adja meg, hogy hány nap elteltével kérje a rendszer a PIN-kód megváltoztatását",
+ "pinHistory": "Adja meg, hogy az adott felhasználói fiók korábbi PIN-kódjai hány kódig visszamenőleg ne legyenek újból felhasználhatók",
+ "pinLowercaseLetters": "A Vállalati Windows Hello PIN-kódjában használandó kisbetűk konfigurálása",
+ "pinSpecialCharacters": "A Vállalati Windows Hello PIN-kódjában használandó speciális karakterek konfigurálása",
+ "pinUppercaseLetters": "A Vállalati Windows Hello PIN-kódjában használandó nagybetűk konfigurálása",
+ "protectUnderLock": "Az alkalmazások céges adatokhoz való hozzáférésének megakadályozása, ha az eszköz zárolt állapotban van. Csak a Windows 10 Mobile rendszerre vonatkozik",
+ "protectedDomainNames": "Védett tartományok",
+ "proxyServers": "Proxykiszolgálók",
+ "requireAppPin": "Az alkalmazás PIN-kódjának letiltása az eszköz PIN-kódjának kezelése esetén",
+ "requiredSettings": "Kötelező beállítások",
+ "requiredSettingsInfo": "A szabályzat eltávolítása vagy hatókörének módosítása a céges adatok titkosításának feloldásával jár.",
+ "revokeOnMdmHandoff": "Védett adatokhoz való hozzáférés visszavonása, ha az eszközt regisztrálják az MDM-ben",
+ "revokeOnUnenroll": "Titkosítási kulcsok visszavonása regisztráció törlésekor",
+ "rmsTemplateForEdp": "Adja meg az Azure RMS-ben használandó sablonazonosítót",
+ "showWipIcon": "Nagyvállalati adatvédelem ikonjának megjelenítése",
+ "type": "Típus",
+ "useRmsForWip": "Azure RMS használata a Windows Információvédelemhez",
+ "value": "Érték",
+ "weRequiredSettingsInfo": "Ez a szabályzat csak a Windows 10 évfordulós kiadására vagy újabb kiadásaira érvényes. A szabályzat a Windows Information Protection (WIP) és a Windows MAM segítségével biztosítja a védelmi funkciókat.",
+ "wipProtectionMode": "Windows Information Protection módja",
+ "withEnrollment": "Regisztrációval",
+ "withoutEnrollment": "Regisztráció nélkül"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "arab",
+ "bulgarian": "bolgár",
+ "chineseSimplified": "kínai (egyszerűsített)",
+ "chineseTraditional": "kínai (hagyományos)",
+ "croatian": "horvát",
+ "czech": "cseh",
+ "danish": "dán",
+ "dutch": "holland",
+ "englishUK": "angol (Egyesült Királyság)",
+ "englishUS": "angol (Egyesült Államok)",
+ "estonian": "észt",
+ "finnish": "finn",
+ "frenchCanada": "francia (Kanada)",
+ "frenchFrance": "francia (Franciaország)",
+ "german": "német",
+ "greek": "görög",
+ "hebrew": "héber",
+ "hungarian": "magyar",
+ "italian": "olasz",
+ "japanese": "japán",
+ "korean": "koreai",
+ "latvian": "lett",
+ "lithuanian": "litván",
+ "norwegian": "norvég (bokmål)",
+ "polish": "lengyel",
+ "portugueseBrazil": "portugál (brazíliai)",
+ "portuguesePortugal": "portugál (portugáliai)",
+ "romanian": "román",
+ "russian": "orosz",
+ "serbian": "szerb",
+ "slovak": "szlovák",
+ "slovenian": "szlovén",
+ "spanishMexico": "spanyol (Mexikó)",
+ "spanishSpain": "spanyol (spanyolországi)",
+ "swedish": "svéd",
+ "thai": "Thaiföld",
+ "turkish": "török",
+ "ukrainian": "ukrán"
+ },
+ "Summary": {
+ "placeholder": "Válasszon ki egy értesítő üzenetet a bal oldalon a tartalom előnézetének megtekintéséhez."
+ },
+ "companyContact": "Kapcsolattartási adatok megjelenítése",
+ "companyLogo": "Cég emblémájának megjelenítése",
+ "companyName": "Cégnév megjelenítése",
+ "createEditDescription": "Értesítő üzenetek sablonjainak létrehozása és szerkesztése.",
+ "createMessage": "Üzenet létrehozása",
+ "deviceDetails": "Eszköz részleteinek megjelenítése",
+ "deviceDetailsInfoBox": "Ez a beállítás alapértelmezés szerint ki van kapcsolva, mivel az eszköz adatainak lekérése késleltetheti az e-mail-értesítések fogadását.",
+ "editImpactInfo": "Az értesítésiüzenet-sablon módosítása a sablont használó összes szabályzatra hatással lesz.",
+ "editMessage": "Üzenet szerkesztése",
+ "email": "e-mail",
+ "emailFooterTitle": "E-mail lábléce",
+ "emailHeaderFooterInfo": "Az e-mail-értesítések e-mail fejlécének és láblécének beállításai a Végpontkezelő bérlői felügyeleti csomópontjának testreszabási beállításain alapulnak.",
+ "emailHeaderTitle": "E-mail-fejléc",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Testreszabási beállítások konfigurálása",
+ "formSubTitle": "Értesítő e-mailek létrehozása és módosítása",
+ "headerFooterSettingsTab": "Élőfej és élőláb beállításai",
+ "imgPreview": "Kép előnézete",
+ "infotext": "Válasszon értesítő üzenetet. Új értesítéseket az Eszközmegfelelőség beállítása tevékenységprofil Kezelés szakaszának Értesítések részén hozhat létre.",
+ "iwLink": "Céges portál webhelyhivatkozásának megjelenítése",
+ "listEmpty": "Nincsenek üzenetsablonok.",
+ "listEmptySelectOnly": "Nincsenek üzenetsablonok. Új értesítéseket az Eszközmegfelelőség beállítása tevékenységprofil Kezelés szakaszának Értesítések részén hozhat létre.",
+ "listSubTitle": "Értesítő üzenetek sablonjainak listája",
+ "listTitle": "Értesítőüzenet-sablonok",
+ "localizedNotificationMessageTemplates": "Honosított értesítési üzenet sablonjai",
+ "messageAssigned": "Az üzenetsablont nem lehet törölni, mert egy vagy több megfelelőségi szabályzat használja.",
+ "messageCapitalized": "Értesítési üzenet sablonja",
+ "messageLowercase": "értesítési üzenet sablonja",
+ "missingDefaultError": "Válasszon egy alapértelmezett sablont",
+ "notificationMessageTemplates": "Értesítőüzenet-sablonok",
+ "rowValidationError": "Legalább egy üzenetsablon szükséges",
+ "selectDescription": "Válasszon értesítő üzenetet. Új értesítést az Eszközmegfelelőség beállítása lap Kezelés szakaszának Értesítések részén hozhat létre.",
+ "tenantValueText": "Bérlői érték",
+ "testEmailLabel": "Előnézeti e-mail küldése",
+ "localeLabel": "Területi beállítás",
+ "isDefaultLocale": "Alapértelmezett"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Eszközök konfigurálása a kezdeti kiépítéshez.",
+ "title": "Eszköz-előkészítés"
+ },
+ "EnrollmentSettings": {
+ "description": "Konfigurálhatja a regisztrációs beállításokat, például letilthatja a regisztrációt, és hozzárendelheti őket a felhasználókhoz.",
+ "title": "Regisztrációs beállítások"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Konfigurálja azokat a beállításokat, amelyekkel a felhasználók helyreállíthatják a Windows rendszert egy rendszerindításra alkalmas USB flash-meghajtóról.",
+ "menuTitle": "Windows operációs rendszer helyreállítási konfigurációja"
+ },
+ "coManagementAuthorityDesc": "Configuration Manager-integráció közös felügyeleti beállításainak konfigurálása",
+ "coManagementAuthorityTitle": "Közös felügyeleti beállítások ",
+ "deploymentProfiles": "Windows AutoPilot Deployment-profilok",
+ "description": "További információ arról a hét módszerről, amellyel a felhasználók és a rendszergazdák regisztrálhatják a Windows 10/11-es PC-ket az Intune-ban.",
+ "descriptionLabel": "Windows-regisztrációs módszerek",
+ "enrollmentStatusPage": "Regisztráció állapotát jelző lap"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Adja meg a kulcsban tárolt bitek számát.",
+ "keyUsage": "Adja meg a tanúsítvány nyilvános kulcsának cseréjéhez szükséges titkosítási műveletet.",
+ "renewalThreshold": "Adja meg a tanúsítvány hátralévő élettartamának százalékában (1 és 99 százalék között), hogy az eszköz mikor kérheti leghamarabb a tanúsítvány megújítását. Az ajánlott érték az Intune-ban 20%. (1-99)",
+ "rootCert": "Válasszon ki egy korábban konfigurált és hozzárendelt legfelső szintű hitelesítésszolgáltatói tanúsítványprofilt. A hitelesítésszolgáltatói tanúsítványnak meg kell egyeznie annak a hitelesítésszolgáltatónak a főtanúsítványával, amely a jelenleg konfigurált profilhoz kiadja a tanúsítványt.",
+ "scepServerUrl": "Adja meg annak az NDES-kiszolgálónak az URL-címét, amely az SCEP használatával adja ki a tanúsítványokat (HTTPS-nek kell lennie). Példa: https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Adja meg annak az NDES-kiszolgálónak az URL-címét vagy -címeit, amely az SCEP használatával adja ki a tanúsítványokat. Példa: https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Tulajdonos alternatív neve",
+ "subjectNameFormat": "Tulajdonosnév formátuma",
+ "validityPeriod": "A tanúsítvány érvényességének lejártáig hátralévő idő. A tanúsítványsablonban megjelenő érvényességi időtartammal egyenlő vagy annál kisebb értéket adjon meg. Alapértelmezésként egy év van beállítva."
+ },
+ "appInstallContext": "Ez a beállítás határozza meg az alkalmazáshoz hozzárendelendő telepítési környezetet. A kettős módú alkalmazások esetében válassza ki az alkalmazáshoz használni kívánt környezetet. Ez minden más alkalmazás esetében előre ki van választva a csomag alapján, és nem lehet módosítani.",
+ "autoUpdateMode": "Konfigurálja az alkalmazás frissítési prioritását. Válassza az Alapértelmezett lehetőséget, ha meg szeretné követelni, hogy az eszköz csatlakozzon a WiFi-hez, töltés alatt álljon, és ne legyen aktív használatban az alkalmazás frissítése előtt. A Magas prioritás lehetőséget választva azonnal frissítheti az alkalmazást, amint a fejlesztő közzétette azt, függetlenül a töltöttségi állapottól, a Wi-Fi-képességtől vagy az eszközön végzett végfelhasználói tevékenységtől. Válassza az Elhalasztva lehetőséget, hogy elhalassza az alkalmazásfrissítéseket 90 napig. A Magas prioritás és az elhalasztva csak DO-eszközök estén lép életbe.",
+ "configurationSettingsFormat": "A konfigurációs beállítások szövegformázása",
+ "ignoreVersionDetection": "A beállítást állítsa az Igen értékre azon alkalmazások esetében, melyeket automatikusan frissít az alkalmazás fejlesztője (mint például a Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Válassza az Igen lehetőséget olyan alkalmazások esetében, amelyeket automatikusan frissít az alkalmazásfejlesztő, vagy ha csak az alkalmazás bundleID azonosítóját szeretné ellenőrizni a telepítés előtt. Ha az alkalmazás bundleID azonosítóját és verziószámát is szeretné ellenőrizni a telepítés előtt, válassza a Nem lehetőséget.",
+ "installAsManagedMacOSLobApp": "Ez a beállítás csak a macOS 11-es és újabb verzióra vonatkozik. Az alkalmazás telepítve lesz, de nem lesz felügyelet alá vonva a macOS 10.15-ös és korábbi verzióin.",
+ "installContextDropdown": "Válassza ki a megfelelő telepítési hatókört. Felhasználószintű telepítés esetén az alkalmazás csak a célfelhasználó számára települ, míg az eszközszintű telepítés esetében az alkalmazás az eszköz összes felhasználója számára telepítve lesz.",
+ "ldapUrl": "Ez az az LDAP-állomásnév, ahonnan az ügyfelek megkapják az e-mail-címzettek nyilvános titkosítási kulcsait. Az e-mailek titkosítva lesznek, ha rendelkezésre áll egy kulcs. Támogatott formátumok:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Válassza ki a társított alkalmazás futtatókörnyezeti engedélyeit.",
+ "policyAssociatedApp": "Válassza ki az alkalmazást, amelyhez a szabályzat társítva lesz.",
+ "policyConfigurationSettings": "Válassza ki a szabályzat konfigurációs beállításainak megadásához használni kívánt módszert.",
+ "policyDescription": "Megadhatja a konfigurációs szabályzat leírását.",
+ "policyEnrollmentType": "Válassza ki, hogy ezek a beállítások az eszközkezeléssel, vagy pedig az Intune SDK-val létrehozott alkalmazásokkal legyenek-e kezelve.",
+ "policyName": "Adja meg a konfigurációs szabályzat nevét.",
+ "policyPlatform": "Válassza ki a platformot, amelyre az alkalmazáskonfigurálási szabályzat érvényes lesz.",
+ "policyProfileType": "Válassza ki eszközprofiltípusokat, amelyekre ez az alkalmazáskonfigurációs profil érvényes lesz",
+ "policySMime": "Az S/MIME-alapú aláírás és titkosítás beállításainak konfigurálása az Outlookban.",
+ "sMimeDeployCertsFromIntune": "Annak megadása, hogy az S/MIME-tanúsítványokat az Intune-ból kézbesíti-e a rendszer az Outlookban való használatra.\r\nAz Intune automatikusan képes telepíteni az aláírási és titkosítási tanúsítványokat a felhasználók számára a Céges portálon keresztül.",
+ "sMimeEnable": "Annak megadása, hogy engedélyezve vannak-e az S/MIME-vezérlők e-mail írásakor",
+ "sMimeEnableAllowChange": "Adja meg, hogy a felhasználó módosíthatja-e az S/MIME engedélyezése beállítást.",
+ "sMimeEncryptAllEmails": "Annak megadása, hogy az összes e-mailt titkosítani kell-e vagy sem. \r\nA titkosítás egy rejtjelező szöveggel konvertálja az adatokat úgy, hogy azokat csak a címzett tudja elolvasni.",
+ "sMimeEncryptAllEmailsAllowChange": "Adja meg, hogy a felhasználó módosíthatja-e az Összes e-mail titkosítása beállítást.",
+ "sMimeEncryptionCertProfile": "Az e-mailek titkosításához használandó tanúsítványprofil megadása.",
+ "sMimeSignAllEmails": "Annak megadása, hogy az összes e-mailt alá kell-e írni vagy sem.\r\nDigitális aláírás használatával ellenőrizhető az e-mail hitelessége, és biztosítható, hogy a tartalmát ne módosítsák illetéktelenül átvitel közben.",
+ "sMimeSignAllEmailsAllowChange": "Adja meg, hogy a felhasználó módosíthatja-e az Összes e-mail aláírása beállítást.",
+ "sMimeSigningCertProfile": "Az e-mailek aláírásához használandó tanúsítványprofil megadása.",
+ "sMimeUserNotificationType": "A felhasználók arról való értesítésének módja, hogy meg kell nyitniuk a Céges portált az Outlook S/MIME-tanúsítványainak lekéréséhez."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "A(z) {0} egy vagy több szabályzatkészletben szerepel. A(z) {0} törlése után a továbbiakban nem tudja hozzárendelni ezeken a szabályzatkészleteken keresztül. Biztosan törli?",
+ "contentWithError": "A(z) {0} egy vagy több szabályzatkészletben szerepelhet. A(z) {0} törlése után a továbbiakban nem tudja hozzárendelni ezeken a szabályzatkészleteken keresztül. Biztosan törli?",
+ "header": "Biztosan törli ezt a korlátozást?"
+ },
+ "DeviceLimit": {
+ "description": "Adja meg, hogy egy felhasználó legfeljebb hány eszközt léptethet be.",
+ "header": "Eszközszámkorlátok",
+ "info": "Megadják, hogy egy felhasználó hány eszközt léptethet be."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "1.0 vagy újabb szükséges.",
+ "android": "Érvényes verziószámot adjon meg. Példák: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Érvényes verziószámot adjon meg. Példák: 5.0, 5.1.1",
+ "iOS": "Érvényes verziószámot adjon meg. Példák: 9.0, 10.0, 9.0.2",
+ "mac": "Érvényes verziószámot adjon meg. Példák: 10, 10.10, 10.10.1",
+ "min": "A minimális verziószám nem lehet kisebb a következő verziószámnál: {0}",
+ "minMax": "A minimális verziószám nem lehet nagyobb a maximális verziószámnál.",
+ "windows": "10.0-s vagy újabb verziójúnak kell lennie. A 8.1-es eszközök engedélyezéséhez hagyja üresen a mezőt",
+ "windowsMobile": "10.0-s vagy újabb verziójúnak kell lennie. A 8.1-es eszközök engedélyezéséhez hagyja üresen a mezőt"
+ },
+ "allPlatformsBlocked": "Minden eszközplatform blokkolva van. A platformkonfiguráció engedélyezéséhez engedélyezze a platformregisztrációt.",
+ "blockManufacturerPlaceHolder": "Gyártó neve",
+ "blockManufacturersHeader": "Letiltott gyártók",
+ "cannotRestrict": "A korlátozás nem támogatott",
+ "configurationDescription": "Adja meg azokat a platformkonfigurációs korlátozásokat, amelyeknek meg kell felelnie egy regisztrálandó eszköznek. Az eszközök regisztrálás utáni korlátozásához használjon megfelelőségi szabályzatokat. A verziókat főverzió.alverzió.buildszám formátumban definiálja. A verziókorlátozások csak a Céges portál alkalmazással regisztrált eszközökre vonatkoznak. Az Intune alapértelmezés szerint személyes tulajdonúként sorolja be az eszközöket. Az eszközök cégesként való besorolásához további műveletekre van szükség.",
+ "configurationDescriptionLabel": "További információ a beléptetési korlátozások beállításáról",
+ "configurations": "Platformok konfigurálása",
+ "deviceManufacturer": "Eszköz gyártója",
+ "header": "Eszköztípus-korlátozások",
+ "info": "Megadják, hogy mely platformok, verziók és felügyeleti típusok regisztrálhatók.",
+ "manufacturer": "Gyártó",
+ "max": "Maximális",
+ "maxVersion": "Maximális verzió",
+ "min": "Min.",
+ "minVersion": "Legalacsonyabb verzió",
+ "newPlatforms": "Új platformokat engedélyezett. Fontolja meg a platformkonfigurációk frissítését.",
+ "personal": "Személyes tulajdonú",
+ "platform": "Platform",
+ "platformDescription": "A következő platformok regisztrálását engedélyezheti. Csak azokat a platformokat tiltsa le, amelyeket nem fog támogatni. Az engedélyezett platformokhoz további regisztrációs korlátozások konfigurálhatók.",
+ "platformSettings": "Platformbeállítások",
+ "platforms": "Platformok kiválasztása",
+ "platformsSelected": "{0} platform kijelölve",
+ "type": "Típus",
+ "versions": "verziók",
+ "versionsRange": "Tartomány minimális és maximális értéke:",
+ "windowsTooltip": "A regisztráció korlátozása a mobileszköz-kezelés segítségével. Ez a PC-s ügynök telepítését nem korlátozza. Csak a Windows 10 és Windows 11 verziók támogatottak. A Windows 8.1 engedélyezéséhez hagyja üresen a verzió mezőt."
+ },
+ "Priority": {
+ "saved": "Sikeresen mentette a szoftverkorlátozási prioritásokat."
+ },
+ "Row": {
+ "announce": "Prioritás: {0}, név: {1}, hozzárendelve: {2}"
+ },
+ "Table": {
+ "deployed": "Üzembe helyezve",
+ "name": "Név",
+ "priority": "Prioritás"
+ },
+ "Type": {
+ "limit": "Eszközszám-korlátozás szerkesztése",
+ "type": "Eszköztípus-korlátozás"
+ },
+ "allUsers": "Minden felhasználó",
+ "androidRestrictions": "Android-korlátozások",
+ "create": "Korlátozás létrehozása",
+ "defaultLimitDescription": "Ez a csoporttagságtól függetlenül az összes felhasználóra a legalacsonyabb prioritással alkalmazott alapértelmezett eszközszámkorlát.",
+ "defaultTypeDescription": "Ez a csoporttagságtól függetlenül az összes felhasználóra a legalacsonyabb prioritással alkalmazott alapértelmezett eszköztípuskorlát.",
+ "defaultWhfbDescription": "Ez a csoporttagságtól függetlenül az összes felhasználóra a legalacsonyabb prioritással alkalmazott alapértelmezett Vállalati Windows Hello-konfiguráció.",
+ "deleteMessage": "Az érintett felhasználók a következő legmagasabb prioritású hozzárendelt korlát, illetve ha nincs más korlát hozzárendelve, az alapértelmezett korlát szerint korlátozva lesznek.",
+ "deleteTitle": "Biztosan törli a(z) {0} korlátozást?",
+ "descriptionHint": "Egy rövid bekezdés, amely leírja a korlátozás beállításai által meghatározott üzleti felhasználást vagy korlátozási szintet.",
+ "edit": "Korlátozás szerkesztése",
+ "info": "Az eszköznek meg kell felelnie a felhasználójához hozzárendelt legmagasabb prioritású regisztrációs korlátozásoknak. A prioritást az eszközkorlátozás húzásával módosíthatja. Az alapértelmezett korlátozások, amelyek az összes felhasználó esetében a legalacsonyabb prioritású korlátozások, a felhasználó nélküli regisztrációk szabályozására szolgálnak. Az alapértelmezett korlátozások szerkeszthetők, de nem törölhetők.",
+ "iosRestrictions": "iOS-korlátozások",
+ "mDM": "MDM",
+ "macRestrictions": "macOS-korlátozások",
+ "maxVersion": "Maximális verzió",
+ "minVersion": "Minimális verzió",
+ "nameHint": "Ez lesz a korlátozáskészlet azonosítása céljából megjelenített elsődleges attribútum.",
+ "noAssignmentsStatusBar": "Rendeljen hozzá korlátozást legalább egy csoporthoz. Kattintson a Tulajdonságok elemre.",
+ "nonAdminForbiddenCreateError": "Korlátozások létrehozásához, szerkesztéséhez vagy törléséhez Intune szolgáltatás- vagy globális rendszergazdának kell lennie.",
+ "nonAdminForbiddenEdit": "A korlátozások szerkesztéséhez rendszergazdának kell lennie.",
+ "notFound": "A korlátozás nem található. Lehet, hogy már törölték.",
+ "personallyOwned": "Személyes tulajdonú eszközök",
+ "restriction": "Korlátozás",
+ "restrictionLowerCase": "korlátozást",
+ "restrictionType": "Korlátozás típusa",
+ "selectType": "Válassza ki a korlátozás típusát",
+ "selectValidation": "Válasszon platformot",
+ "typeHint": "Az eszköztulajdonságok korlátozására válassza az eszköztípuskorlátot. Az eszközök felhasználónkénti számának korlátozására válassza az eszközszámkorlátot.",
+ "typeRequired": "A korlátozás típusának megadása kötelező.",
+ "winPhoneRestrictions": "Windows Phone-korlátozások",
+ "windowsECv1Info": "A régebbi regisztrációs korlátozások nem szerkeszthetők és nem módosíthatók, csak törölhetők.",
+ "windowsECv2Info": "Húzással rangsorolhatja a regisztrációs korlátozásokat. Alább megtekintheti az alapértelmezett és az előre konfigurált korlátozásokat. Minden új regisztrációs korlátozás prioritása magasabb lesz, mint az alapértelmezett és az előre konfigurált korlátozások.",
+ "windowsRestrictions": "Windows-korlátozások",
+ "windowsRestrictionsPreview": "Szűrőalapú Windows-korlátozások (előzetes verzió)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 nap",
+ "twoDays": "2 nap",
+ "zeroDays": "0 nap"
+ },
+ "SecurityTemplate": {
+ "aSR": "Támadási felület csökkentése",
+ "accountProtection": "Fiókvédelem",
+ "allDevices": "Minden eszköz",
+ "antivirus": "Víruskereső",
+ "antivirusReporting": "Víruskereső-jelentéskészítés (előzetes verzió)",
+ "conditionalAccess": "Feltételes hozzáférés",
+ "deviceCompliance": "Eszköz megfelelősége",
+ "diskEncryption": "Lemeztitkosítás",
+ "eDR": "Végpontészlelés és -válasz",
+ "ePM": "Végponti jogosultságok kezelése",
+ "firewall": "Tűzfal",
+ "helpSupport": "Súgó és támogatás",
+ "setup": "Telepítés",
+ "wdapt": "Microsoft Defender for Endpoint"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Adatvédelmi konfiguráció"
+ },
+ "OrganizeMailByThread": {
+ "title": "Levelezés rendezése szálak szerint",
+ "tooltip": "Az Outlook alapértelmezett viselkedése, hogy a levelezés beszélgetéseit szálak szerint csoportosított beszélgetési nézetbe rendezi. Ha ez a beállítás le van tiltva, az Outlook minden üzenetet külön jelenít meg, és nem csoportosítja őket szálak szerint."
+ },
+ "Sync": {
+ "header": "Kapcsolattartási mezők szinkronizálása natív ügyfelek alkalmazáskonfigurációjával"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
+ "allowBiometricsTitle": "Az alkalmazás eléréséhez biometria szükséges",
+ "allowBiometricsTooltip": "Megkövetelheti a biometria, például TouchID vagy a FaceID használatát azoktól a felhasználóktól, akik szeretnék elérni az alkalmazást az eszközükön. Ha kötelező a használata, a felhasználóknak az ebben a profilban kiválasztott hitelesítési módszer mellett a biometriát is használniuk kell. Ezt a beállítást nem ajánlott engedélyezni, ha Intune App Protection-szabályzatok vannak érvénybe léptetve, mert az alkalmazásvédelmi szabályzat olyan hozzáférési követelményeket tartalmaz, amelyeknek a felügyelt adatok elérése előtt kell megfelelni. Ha mindkét funkció engedélyezve van, az Outlook Mobile elérésekor több hozzáférés-jóváhagyási panel jelenhet meg. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
+ "allowCalendarNotificationsTitle": "Naptárértesítések",
+ "allowCalendarNotificationsTooltip": "Az összes részlet megjelenítésének engedélyezése a naptárbeli értesítésekben, amikor az Alkalmazásvédelmi szabályzat „Szervezeti adatok értesítései” beállításának értéke „Céges adatok letiltása”.",
+ "allowDefaultAppSignatureTitle": "Alapértelmezett alkalmazás-aláírás",
+ "allowDefaultAppSignatureTooltip": "Az alapértelmezett alkalmazás-aláírás azt jelzi, hogy az alkalmazás „Az iOS Outlook letöltése” aláírást alapértelmezett aláírásként fogja-e használni üzenetek írásakor. Ha le van tiltva a beállítás, az alkalmazás nem fogja használni az alapértelmezett aláírást, a felhasználók azonban hozzáadhatják saját aláírásukat.",
+ "allowExternalRecipientsMailTipTitle": "Külső címzettek e-mail-tipp",
+ "allowExternalRecipientsMailTipTooltip": "A Külső címzettek e-mail-tipp akkor jelenik meg, ha a feladó külső címzettet vagy külső címzetteket tartalmazó terjesztési csoportot ad hozzá az e-mailhez. Ez az e-mail-tipp arról tájékoztatja a feladót, hogy az adott e-mail elhagyja-e a céget. Ez megkönnyíti a szóhasználattal, a hangnemmel és a tartalommal kapcsolatos helyes döntések meghozatalát. Ez a funkció csak az Exchange Online-fiókok és a modern hibrid hitelesítést használó helyi fiókok számára érhető el. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Bekapcsolva.",
+ "allowFocusedInboxTitle": "Szűrt levelek",
+ "allowFocusedInboxTooltip": "A Szűrt levelek funkció két lapra választja szét beérkezett üzenetek mappáját – a Szűrt és az Egyéb lapra. A legfontosabb e-mailek a Szűrt lapon jelennek meg, míg a többi rejtve marad, de könnyen elérhető az Egyéb lapon. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Bekapcsolva.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
+ "allowMailNotificationsTitle": "Értesítések e-mailben",
+ "allowMailNotificationsTooltip": "Ez az érték határozza meg az Outlook engedélyezi-e az e-mail-értesítéseket. A Nem érték megadásával letiltja az e-mail-értesítéseket.",
+ "allowOrgDataOnWearablesTitle": "Szervezeti adatok a hordható eszközökön",
+ "allowOrgDataOnWearablesTooltip": "Ez az érték határozza meg, hogy az Outlook-adatok szinkronizálhatók-e hordható eszközre. A Nem érték megadásával letiltja a hordható eszközre való szinkronizálást.",
+ "allowSaveContactsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a kapcsolattartó-szinkronizálási beállítást.",
+ "allowSaveContactsTitle": "Partnerek mentése",
+ "allowSaveContactsTooltip": "A névjegyek mobileszközön lévő natív címjegyzékbe történő mentése lehetővé teszi az új hívások és SMS-ek összekapcsolását a felhasználó meglévő Outlook-névjegyeivel. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
+ "allowSmartReplyTitle": "Javasolt válaszok",
+ "allowSmartReplyTooltip": "Ha megnyit egy üzenetet, az Outlook az üzenet alatt válaszokat javasolhat. Ha kiválaszt egy javasolt választ, a küldés előtt szerkesztheti a választ. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
+ "allowUserChangeGeneralToolTip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
+ "allowUserChangeTitle": "A felhasználó módosíthatja a beállításokat",
+ "blockExternalImagesAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
+ "blockExternalImagesTitle": "Külső képek letiltása",
+ "blockExternalImagesTooltip": "Ha engedélyezve van a külső képek letiltása, az alkalmazás megakadályozza azoknak az interneten tárolt képeknek a letöltését, amelyek az üzenettörzsbe vannak beágyazva. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
+ "disableAddinsTitle": "Bővítmények engedélyezése",
+ "disableAddinsTooltip": "Alapértelmezés szerint az alkalmazásvédelmi házirend lehetővé teszi a felhasználók számára harmadik felektől származó bővítmények használatát, de lehetőség van a bővítmények letiltására is az „A házirend által felügyelt alkalmazások adatainak szinkronizálása a natív alkalmazásokkal“ beállítás segítségével. Ennek a beállításnak a Kikapcsolva értékre állítása letiltja a bővítmények használatát, ha az Alkalmazásvédelmi házirend Engedélyezve értékre van állítva.",
+ "discoverFeedTitle": "Felfedezési hírcsatorna",
+ "discoverFeedTooltip": "A felfedezési hírcsatorna elérhetővé teszi a leggyakrabban használt Office-fájlokat. Alapértelmezés szerint ez a hírcsatorna engedélyezve van, ha a Delve használata engedélyezve van a felhasználó számára. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezés szerint be van kapcsolva.",
+ "enableSMIMETitle": "S/MIME engedélyezése",
+ "enableSMIMETooltip": "Megadja, hogy engedélyezve vannak-e az S/MIME-vezérlők e-mail írásakor.",
+ "encryptAllEmails": "Az összes e-mail titkosítása",
+ "encryptAllEmailsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthatja-e az Összes e-mail titkosítása beállítást.",
+ "encryptAllEmailsTooltip": "Adja meg, hogy az összes e-mailt titkosítani kell-e vagy sem. A titkosítás egy rejtjelező szöveggel konvertálja az adatokat úgy, hogy csak a címzett tudja elolvasni.",
+ "ldapUrl": "LDAP URL-cím",
+ "ldapUrlTooltip": "Ez az az LDAP-állomásnév, ahonnan az ügyfelek megkapják az e-mail-címzettek nyilvános titkosítási kulcsait. Az e-mailek titkosítva lesznek, ha rendelkezésre áll egy kulcs. Támogatott formátumok: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást.",
+ "nativeCalendarSyncMAMOnlyTitle": "Naptár szinkronizálásának engedélyezése",
+ "nativeCalendarSyncMAMOnlyTooltip": "Az alkalmazásvédelmi házirend alapértelmezés szerint lehetővé teszi a naptár szinkronizálását a natív Naptár alkalmazásban, de használható a naptárszinkronizálás elérhetőségének blokkolására is. Ez a beállítás független az alkalmazásvédelmi házirend beállításától, és lehetővé teszi a szervezetek számára annak meghatározását, hogy elérhető legyen-e a naptár szinkronizálása a munkahelyi vagy iskolai fiók számára.",
+ "nativeCalendarSyncTitle": "Naptárak szinkronizálása",
+ "nativeCalendarSyncTooltip": "Alapértelmezés szerint az alkalmazásvédelmi házirend lehetővé teszi a naptár szinkronizálását a natív Naptár alkalmazással, de lehetőség van a naptár szinkronizálásának letiltására is az „A házirend által felügyelt alkalmazások adatainak szinkronizálása a natív alkalmazásokkal“ beállítás segítségével. Ennek a beállításnak a Kikapcsolva értékre állítása letiltja a naptár szinkronizálását, ha az Alkalmazásvédelmi házirend Engedélyezve értékre van állítva.",
+ "playMyEmailsTitle": "Saját e-mailek lejátszása",
+ "playMyEmailsTooltip": "A saját e-mailek lejátszása funkció alapértelmezés szerint nincs engedélyezve az alkalmazásban, de a Beérkezett üzenetek mappában egy transzparensen felajánlható a jogosult felhasználóknak. Ha ez a beállítás ki van kapcsolva, a funkció nem lesz felajánlva a jogosult felhasználóknak az alkalmazásban. A felhasználók dönthetnek úgy, hogy manuálisan engedélyezik a saját e-mailek lejátszását az alkalmazásból, még akkor is, ha ez a funkció ki van kapcsolva. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezés szerint be van kapcsolva, és a funkció fel lesz ajánlva a jogosult felhasználóknak.",
+ "signAllEmails": "Az összes e-mail aláírása",
+ "signAllEmailsAllowUserChangeTooltip": "Adja meg, hogy a felhasználó módosíthatja-e az Összes e-mail aláírása beállítást.",
+ "signAllEmailsTooltip": "Adja meg, hogy az összes e-mailt alá kell-e írni vagy sem. Digitális aláírás használatával ellenőrizhető az e-mail hitelessége, és biztosítható, hogy a tartalmát nem módosítják illetéktelenül átvitel közben.",
+ "syncAddressTitle": "Cím",
+ "syncAddressTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő címet a natív névjegyekkel.",
+ "syncBirthdayTitle": "Születésnap",
+ "syncBirthdayTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő születésnapot a natív névjegyekkel.",
+ "syncCompanyTitle": "Cég",
+ "syncCompanyTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő cégnevet a natív névjegyekkel.",
+ "syncDepartmentTitle": "Részleg",
+ "syncDepartmentTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő részleget a natív névjegyekkel.",
+ "syncEmailAddressTitle": "E-mail cím",
+ "syncEmailAddressTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő e-mail-címet a natív névjegyekkel.",
+ "syncInstantMessagingAddressTitle": "Azonnal üzenetkezelési cím",
+ "syncInstantMessagingAddressTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő csevegési címet a natív névjegyekkel.",
+ "syncJobTitleTitle": "Beosztás",
+ "syncJobTitleTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő beosztást a natív névjegyekkel.",
+ "syncNicknameTitle": "Becenév.",
+ "syncNicknameTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő becenevet a natív névjegyekkel.",
+ "syncNotesTitle": "Megjegyzések",
+ "syncNotesTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő megjegyzéseket a natív névjegyekkel.",
+ "syncPhoneHomeFaxNumberTitle": "Telefon otthoni faxszáma",
+ "syncPhoneHomeFaxNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő otthoni faxszámot a natív névjegyekkel.",
+ "syncPhoneHomeNumberTitle": "Otthoni telefonszám",
+ "syncPhoneHomeNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő otthoni telefonszámot a natív névjegyekkel.",
+ "syncPhoneMobileNumberTitle": "Mobiltelefonszám",
+ "syncPhoneMobileNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő mobiltelefonszámot a natív névjegyekkel.",
+ "syncPhoneOtherNumberTitle": "Egyéb telefonszám",
+ "syncPhoneOtherNumberTooltip": "Ez az érték meghatározza, hogy szinkronizálja-e névjegyen szereplő egyéb telefonszámot a natív névjegyekkel.",
+ "syncPhonePagerNumberTitle": "Személyhívó telefonszáma",
+ "syncPhonePagerNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő személyhívószámot a natív névjegyekkel.",
+ "syncPhoneWorkFaxNumberTitle": "Munkahelyi telefon faxszáma",
+ "syncPhoneWorkFaxNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő munkahelyi faxszámot a natív névjegyekkel.",
+ "syncPhoneWorkNumberTitle": "Munkahelyi telefonszám",
+ "syncPhoneWorkNumberTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a munkahelyi telefonszámot a natív névjegyekkel.",
+ "syncPrefixTitle": "Név előtagja",
+ "syncPrefixTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e a névjegyen szereplő név előtagját a natív névjegyekkel.",
+ "syncSuffixTitle": "Név utótagja",
+ "syncSuffixTooltip": "Ez az érték határozza meg, hogy szinkronizálja-e névjegyen szereplő név utótagját a natív névjegyekkel.",
+ "textPredictionsTitle": "Prediktív szövegbevitelek",
+ "textPredictionsTooltip": "Az Outlook az üzenetek írása közben javasolhat szavakat és kifejezéseket. Ha az Outlook javasol valamit, pöccintéssel elfogadhatja. Ha a beállítás nincs konfigurálva, alapértelmezett esetben be van kapcsolva az alkalmazásban.",
+ "themesEnabledTitle": "Témák engedélyezve",
+ "themesEnabledTooltip": "Adja meg, hogy a felhasználó használhat-e egyéni vizuális témát."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "E beállításokkal ellenőrizheti, hogy mely felhasználók telepítenek olyan alkalmazásokat, amelyek használatát a cége nem engedélyezte. Válassza ki a korlátozott alkalmazások listájának típusát:
\r\n Letiltott alkalmazások – azon alkalmazások listája, amelyek felhasználók általi telepítéséről értesülni szeretne. \r\n Jóváhagyott alkalmazások – azon alkalmazások listája, amelyek használatát a cége engedélyezte. Ha a felhasználók egy ebben a listában nem szereplő alkalmazást telepítenek, Ön erről értesítést kap. \r\n ",
+ "androidZebraMxZebraMx": "Zebra-eszközök konfigurálása MX-profil XML formátumban való feltöltésével.",
+ "iosDeviceFeaturesAirprint": "Ezekkel a beállításokkal megadhatja, hogy az iOS-eszközök automatikusan csatlakozzanak a hálózatbeli AirPrint-kompatibilis nyomtatókhoz. Ehhez szüksége lesz a nyomtatók IP-címére és elérési útjára.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Konfiguráljon egy olyan alkalmazásbővítményt, amely engedélyezi az egyszeri bejelentkezés (SSO) használatát az iOS 13.0 vagy újabb rendszert futtató eszközök esetében.",
+ "iosDeviceFeaturesHomeScreenLayout": "Konfigurálja az iOS-eszközök dokkjának és főképernyőjének elrendezését. Bizonyos eszközöknél a megjelenített elemek száma korlátozott lehet.",
+ "iosDeviceFeaturesIOSWallpaper": "Kép megjelenítése az iOS-eszközök főképernyőjén és/vagy zárolási képernyőjén.\r\n Ha egyedi képet szeretne megjeleníteni az egyes képernyőkön, akkor hozzon létre egy-egy profilt a zárolási képernyőn, valamint a főképernyőn megjelenő képpel.\r\n Ezt követően rendelje hozzá mindkét profilt az egyes felhasználókhoz.\r\n \r\n
\r\n
Maximális fájlméret: 750 KB
\r\n
Fájltípus: PNG, JPG vagy JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Az alkalmazások értesítési beállításainak megadása. Az iOS 9.3-as és újabb verzióiban támogatott.",
+ "iosDeviceFeaturesSharedDevice": "A zárolási képernyőn megjelenő nem kötelező szöveg megadása. Ezt a funkciót az IOS 9.3-as és újabb verziói támogatják. További információ",
+ "iosGeneralApplicationRestrictions": "E beállításokkal ellenőrizheti, hogy mely felhasználók telepítenek olyan alkalmazásokat, amelyek használatát a cége nem engedélyezte. Válassza ki a korlátozott alkalmazások listájának típusát:
\r\n Letiltott alkalmazások – azon alkalmazások listája, amelyek felhasználók általi telepítéséről értesülni szeretne. \r\n Jóváhagyott alkalmazások – azon alkalmazások listája, amelyek használatát a cége engedélyezte. Ha a felhasználók egy ebben a listában nem szereplő alkalmazást telepítenek, Ön erről értesítést kap. \r\n ",
+ "iosGeneralApplicationVisibility": "A megjelenített alkalmazások listáján megadhatja, hogy a felhasználó mely iOS-alkalmazásokat jeleníthesse meg és indíthassa el. A rejtett alkalmazások listáján azokat az iOS-alkalmazásokat adhatja meg, amelyeket a felhasználó nem jeleníthet meg és nem indíthat el.",
+ "iosGeneralAutonomousSingleAppMode": "Ha erre a listára felvesz és egy eszközhöz hozzárendel egy alkalmazást, kizárólag arra az alkalmazásra korlátozhatja az eszköz használatát, ha az elindult, illetve zárolhatja az eszközt bizonyos művelet végrehajtásakor (például vizsgáztatás ideje alatt). A művelet befejeződése, illetve a korlátozás feloldása után az eszköz visszatér a szokásos állapotba.",
+ "iosGeneralKiosk": "Kioszkmódban zárolódnak az eszköz különböző beállításai, illetve egyetlen alkalmazás futtatására korlátozható az eszköz használata. Ez többek között kiskereskedelmi üzletekben lehet hasznos, ahol az eszközön egyetlen bemutatóalkalmazásnak kell futnia.",
+ "macDeviceFeaturesAirprint": "Ezekkel a beállításokkal megadhatja, hogy a macOS-eszközök automatikusan csatlakozzanak a hálózatbeli AirPrint-kompatibilis nyomtatókhoz. Ehhez szüksége lesz a nyomtatók IP-címére és erőforrás-elérési útjára.",
+ "macDeviceFeaturesAssociatedDomains": "A társított tartományok konfigurálásával megoszthatja az adatokat és a bejelentkezési hitelesítő adatokat a szervezet alkalmazásai és webhelyei között. Ez a profil a macOS 10.15-ös vagy újabb verzióját futtató eszközökön alkalmazható.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Konfiguráljon egy olyan alkalmazásbővítményt, amely engedélyezi az egyszeri bejelentkezés (SSO) használatát a macOS 10.15 vagy újabb rendszert futtató eszközök esetében.",
+ "macDeviceFeaturesLoginItems": "Kiválaszthatja, hogy mely alkalmazások, fájlok és mappák legyenek nyitva, amikor a felhasználók bejelentkeznek az eszközeiken. Ha nem szeretné, hogy a felhasználók megváltoztassák a kiválasztott alkalmazások megnyitásának módját, elrejtheti az alkalmazást a felhasználói konfigurációból.",
+ "macDeviceFeaturesLoginWindow": "Konfigurálja a macOS bejelentkezési képernyőjének megjelenését, valamint a felhasználók számára a bejelentkezés előtt és után elérhető funkciókat.",
+ "macExtensionsKernelExtensions": "Használja ezeket a beállításokat a kernelbővítményekre vonatkozó szabályzat konfigurálásához a 10.13.2 vagy újabb verziót futtató macOS-eszközökön.",
+ "macGeneralDomains": "A felhasználó által küldött vagy fogadott azon e-mailek, amelyek nem egyeznek az itt megadott tartománnyal, nem megbízhatóként lesznek megjelölve.",
+ "windows10EndpointProtectionApplicationGuard": "A Microsoft Edge használatakor a Microsoft Defender alkalmazásőr védi a környezetet a munkahely által megbízhatóként meg nem jelölt webhelyektől. Ha a felhasználók olyan webhelyeket keresnek fel, amelyek nem találhatók meg az elszigetelt hálózat határán belül, a rendszer egy virtuális böngészési Hyper-V-munkamenetben nyitja meg ezeket a webhelyeket. A megbízható webhelyek meghatározása a hálózathatárral történik, amelyet az Eszközkonfiguráció lapon lehet beállítani. Megjegyzés: ez a funkció kizárólag 64-bites Windows 10 vagy újabb verziókat futtató eszközökhöz érhető el.",
+ "windows10EndpointProtectionCredentialGuard": "A Credential Guard engedélyezésekor a a rendszer a következő szükséges beállításokat engedélyezi:\r\n \r\n
\r\n
A virtualizálás-alapú biztonság engedélyezése: A virtualizálás-alapú biztonság (VBS) bekapcsolása a következő újraindításkor. A virtualizálás-alapú biztonság a Windows hipervizorral támogatja a biztonsági szolgáltatásokat.
\r\n \r\n
Biztonságos rendszerindítás közvetlen memória-hozzáféréssel: A VBS bekapcsolása biztonságos rendszerindítással és közvetlen memória-hozzáféréssel (DMA).
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Válasszon ki további olyan alkalmazásokat, amelyeket a Microsoft Defender alkalmazásfelügyeleti funkciójával szeretne naplózni, vagy amelyek futtatását ezzel a funkcióval kívánja engedélyezni. A Windows-összetevők és a Windows Áruházból származó alkalmazások automatikusan megbízhatónak minősülnek, és futtathatók.
\r\n A rendszer nem tiltja le a Csak naplózás üzemmódban futó alkalmazásokat, és ezek eseményeit a helyi ügyfélnaplókban rögzíti.\r\n ",
+ "windows10GeneralPrivacyPerApp": "Olyan alkalmazások hozzáadása, amelyek viselkedésének az „Alapértelmezett adatvédelem” kategóriában meghatározottól eltérőnek kell lennie.",
+ "windows10NetworkBoundaryNetworkBoundary": "A hálózathatár a vállalati erőforrások listájából áll, például a vállalati hálózat számítógépeihez tartozó felhőbeli tartományok vagy IP-címtartományok. A hálózathatárok meghatározásával szabályzatokat alkalmazhat az ilyen helyeken található adatok védelmére.",
+ "windowsHealthMonitoring": "A Windows biztonságiállapot-figyelési szabályzatának konfigurálása.",
+ "windowsPhoneGeneralApplicationRestrictions": "A Windows Phone letilthatja a felhasználók számára a tiltott alkalmazások listáján szereplő, illetve a jóváhagyott alkalmazások listáján nem szereplő alkalmazások telepítését vagy futtatását. Minden felügyelt alkalmazást hozzá kell adni a jóváhagyott alkalmazások listájához."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Csak a kiválasztott blokkoló alkalmazások sikertelensége technikusi fázisban",
+ "apps": "alkalmazások",
+ "appsListName": "Alkalmazáslista",
+ "blockingApps": "Blokkoló alkalmazások",
+ "managedApps": "Felügyelt alkalmazások",
+ "noApps": "Nincsenek alkalmazások",
+ "noAppsError": "Hiba történt az alkalmazások beolvasásakor",
+ "selectApps": "Alkalmazások kiválasztása",
+ "selectedAppsCount": "{0} alkalmazás kiválasztva (legfeljebb 100)",
+ "useSelectedAppsAll": "Az összes",
+ "useSelectedAppsSelected": "Kijelölve",
+ "useSelectedAppsToggleLabel": "Az eszköz használatának letiltása az alábbi kötelező alkalmazások telepítéséig, ha azok hozzá vannak rendelve a felhasználóhoz vagy az eszközhöz"
+ },
+ "Header": {
+ "application": "Alkalmazás",
+ "publisher": "Gyártó",
+ "version": "Verzió"
+ },
+ "SearchBox": {
+ "ariaLabel": "Alkalmazások keresése",
+ "placeHolder": "Keresés név vagy közzétevő szerint"
+ },
+ "allowToUseToggle": "Az eszköz használatának engedélyezése a felhasználóknak telepítési hiba esetén",
+ "blockToggle": "Az eszköz használatának letiltása az összes alkalmazás és profil telepítéséig",
+ "blockToolTip": "Ha hozzáadja a Microsoft Word alkalmazást a listához, például a célzott felhasználók és eszközök nem fognak tudni elhagyni a regisztráció állapotát jelző lapot, amíg a Word sikeresen telepítve nem lett.",
+ "collectLogToggle": "Naplógyűjtés és diagnosztikai oldal bekapcsolása a végfelhasználók számára",
+ "create": "Profil létrehozása",
+ "customMessageTextBox": "Hibaüzenet",
+ "customMessageToggle": "Egyéni üzenet megjelenítése időkorlát vagy hiba esetén",
+ "enableForAutopilotOnlyToggle": "Lap megjelenítése csak a kezdőélmény (OOBE) által regisztrált eszközöknek",
+ "installQualityUpdatesToggle": "A Windows minőségi frissítéseinek telepítése (újraindíthatja az eszközt) (előzetes verzió)",
+ "progressToggle": "Alkalmazás és profil konfigurációs folyamatának megjelenítése",
+ "resetToggle": "Az eszköz alaphelyzetbe állításának engedélyezése a felhasználóknak telepítési hiba esetén",
+ "timeout": "Hiba megjelenítése, ha a telepítés a (percekben) megadott időtartamnál több időt vesz igénybe"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Tulajdonság",
+ "rule": "Szabály",
+ "ruleDetails": "Szabály részletei",
+ "value": "Érték"
+ },
+ "assignIf": "Profil hozzárendelése, ha",
+ "deleteWarning": "Ezzel törli a kiválasztott alkalmazhatósági szabályt",
+ "dontAssignIf": "Ne rendeljen hozzá profilt, ha",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "és további {0}",
+ "instructions": "Adja meg, hogyan kívánja alkalmazni ezt a profilt egy hozzárendelt csoporton belül. Az Intune csak azokra az eszközökre alkalmazz a profilt, amelyek megfelnek ezen szabályok kombinált feltételeinek.",
+ "maxText": "Maximum",
+ "minText": "Minimum",
+ "noActionRow": "Nincs megadva alkalmazhatósági szabály",
+ "oSVersion": "például: 1.2.3.4",
+ "toText": "–",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home egynyelvű",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core – kereskedelmi",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "Operációs rendszer kiadása",
+ "windows10OsVersion": "Operációs rendszer verziója",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "A felhasználó módosíthatja a beállításokat",
+ "tooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást."
+ },
+ "AllowWorkAccounts": {
+ "title": "Csak munkahelyi vagy iskolai fiókok engedélyezése",
+ "tooltip": " Ha engedélyezi ezt a beállítást, a felhasználók nem fognak tudni személyes e-mail- és tárfiókokat felvenni az Outlookban. Ha a felhasználó rendelkezik az Outlookban felvett személyes fiókkal, az alkalmazás a felhasználótól a személyes fiók eltávolítását fogja kérni. Ha a felhasználó nem távolítja el a személyes fiókot, akkor a munkahelyi vagy iskolai fiókot nem lehet hozzáadni."
+ },
+ "BlockExternalImages": {
+ "title": "Külső képek blokkolása",
+ "tooltip": "Ha engedélyezve van a külső lemezképek letiltása, az alkalmazás megakadályozza azoknak az interneten tárolt képeknek a letöltését, amelyek az üzenettörzsbe vannak beágyazva. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva."
+ },
+ "ConfigureEmail": {
+ "title": "E-mail-fiók beállításainak konfigurálása"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Az alapértelmezett alkalmazás-aláírás azt jelzi hogy az alkalmazás „Az Android Outlook letöltése” aláírást alapértelmezett aláírásként fogja-e használni üzenetek írásakor. Ha le van tiltva a beállítás, az alkalmazás nem fogja használni az alapértelmezett aláírást, a felhasználók azonban hozzáadhatják saját aláírásukat.\r\n\r\nHa nincs konfigurálva a beállítás, az alapértelmezett alkalmazásbeállítás engedélyezve lesz.",
+ "iOS": "Az alapértelmezett alkalmazás-aláírás azt jelzi hogy az alkalmazás „Az iOS Outlook letöltése” aláírást alapértelmezett aláírásként fogja-e használni üzenetek írásakor. Ha le van tiltva a beállítás, az alkalmazás nem fogja használni az alapértelmezett aláírást, a felhasználók azonban hozzáadhatják saját aláírásukat.\r\n\r\nHa nincs konfigurálva a beállítás, az alapértelmezett alkalmazásbeállítás engedélyezve lesz."
+ },
+ "title": "Alapértelmezett alkalmazás-aláírás"
+ },
+ "OfficeFeedReplies": {
+ "title": "Felfedezési hírcsatorna",
+ "tooltip": "A felfedezési hírcsatorna elérhetővé teszi a leggyakrabban használt Office-fájlokat. Alapértelmezés szerint ez a hírcsatorna engedélyezve van, ha a Delve használata engedélyezve van a felhasználó számára. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezés szerint be van kapcsolva."
+ },
+ "OrganizeMailByThread": {
+ "title": "Levelezés rendezése szálak szerint",
+ "tooltip": "Az Outlook alapértelmezett viselkedése, hogy a levelezés beszélgetéseit szálak szerint csoportosított beszélgetési nézetbe rendezi. Ha ez a beállítás le van tiltva, az Outlook minden üzenetet külön jelenít meg, és nem csoportosítja őket szálak szerint."
+ },
+ "PlayMyEmails": {
+ "title": "Saját e-mailek lejátszása",
+ "tooltip": "A saját e-mailek lejátszása funkció alapértelmezés szerint nincs engedélyezve az alkalmazásban, de a Beérkezett üzenetek mappában egy transzparensen felajánlható a jogosult felhasználóknak. Ha ez a beállítás ki van kapcsolva, a funkció nem lesz felajánlva a jogosult felhasználóknak az alkalmazásban. A felhasználók dönthetnek úgy, hogy manuálisan engedélyezik a saját e-mailek lejátszását az alkalmazásból, még akkor is, ha ez a funkció ki van kapcsolva. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezés szerint be van kapcsolva, és a funkció fel lesz ajánlva a jogosult felhasználóknak."
+ },
+ "SuggestedReplies": {
+ "title": "Javasolt válaszok",
+ "tooltip": "Ha megnyit egy üzenetet, az Outlook válaszokat javasolhat az üzenet alatt. Ha kiválaszt egy javasolt választ, azt a küldés előtt módosíthatja."
+ },
+ "SyncCalendars": {
+ "title": "Naptárak szinkronizálása",
+ "tooltip": "Annak konfigurálása, hogy a felhasználók szinkronizálhatják-e az Outlook-naptárt a natív naptáralkalmazással és -adatbázissal."
+ },
+ "TextPredictions": {
+ "title": "Prediktív szövegbevitel",
+ "tooltip": "Az Outlook az üzenetek írása közben javasolhat szavakat és kifejezéseket. Ha az Outlook javasol valamit, pöccintéssel elfogadhatja. Ha a beállítás nincs konfigurálva, alapértelmezett esetben be van kapcsolva az alkalmazásban."
+ },
+ "ThemesEnabled": {
+ "title": "Témák engedélyezve",
+ "tooltip": "Adja meg, hogy a felhasználó használhat-e egyéni vizuális témát."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS-eszközök"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Rendszergazdai kapcsolatok",
+ "appPackaging": "Alkalmazás csomagolása",
+ "autopatchGroups": "Automatikus javítási csoportok",
+ "devices": "Eszközök",
+ "featureEnablement": "Funkció aktiválása",
+ "feedback": "Visszajelzés",
+ "gettingStarted": "Kezdeti lépések",
+ "messages": "Üzenetek",
+ "onlineResources": "Online erőforrások",
+ "policyHealth": "Szabályzat állapota",
+ "policyHealthPreview": "Szabályzat állapota (előzetes verzió)",
+ "releaseManagement": "Kiadáskezelés",
+ "serviceRequests": "Szolgáltatáskérelmek",
+ "settings": "Beállítások",
+ "supportRequests": "Támogatási kérések",
+ "tenantEnrollment": "Bérlői regisztráció",
+ "tenantManagement": "Bérlőkezelés"
+ },
+ "actions": "Meg nem felelés esetén végrehajtandó műveletek",
+ "advancedExchangeSettings": "Exchange Online-beállítások",
+ "advancedThreatProtection": "Microsoft Defender for Endpoint",
+ "allApps": "Minden alkalmazás",
+ "allDevices": "Minden eszköz",
+ "androidFotaDeployments": "Android FOTA üzembe helyezése",
+ "appBundles": "Alkalmazáskötegek",
+ "appCategories": "Alkalmazáskategóriák",
+ "appConfigPolicies": "Alkalmazáskonfigurációs szabályzatok",
+ "appConfigurationStatus": "Alkalmazáskonfiguráció állapota",
+ "appInstallStatus": "Alkalmazás telepítésének állapota",
+ "appLicences": "Alkalmazáslicencek",
+ "appProtectionPolicies": "Alkalmazásvédelmi szabályzatok",
+ "appProtectionStatus": "Alkalmazásvédelem állapota",
+ "appSelectiveWipe": "Alkalmazás szelektív törlése",
+ "appleVppTokens": "Apple VPP-tokenek",
+ "apps": "Alkalmazások",
+ "assign": "Feladatok",
+ "assignedPermissions": "Hozzárendelt engedélyek",
+ "assignedRoles": "Hozzárendelt szerepkörök",
+ "autopilotDeploymentReport": "Autopilot-beli üzemelő példányok (előzetes verzió)",
+ "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (előzetes verzió)",
+ "brandingAndCustomization": "Testreszabás",
+ "cartProfiles": "Kocsiprofilok",
+ "certificateConnectors": "Tanúsítvány-összekötők",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Felhőalapú csatlakoztatott eszközök (előzetes verzió)",
+ "cloudPcActions": "Felhőbeli PC-műveletek (előzetes verzió)",
+ "cloudPcMaintenanceWindows": "Felhőalapú PC karbantartási időszakai (előzetes verzió)",
+ "compliancePolicies": "Megfelelőségi szabályzatok",
+ "complianceScriptManagement": "Szkriptek",
+ "complianceScriptManagementPreview": "Szkriptek (előzetes verzió)",
+ "complianceSettings": "Megfelelőségi szabályzat beállításai",
+ "conditionStatements": "Feltételutasítások",
+ "conditions": "Helyek",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Konfigurációs profilok",
+ "configurationScripts": "Konfigurációs szkriptek",
+ "connectorsAndTokens": "Összekötők és tokenek",
+ "corporateDeviceIdentifiers": "Céges készülékazonosítók",
+ "customAttributes": "Egyéni attribútumok",
+ "customAttributesMacOS": "Egyéni attribútumok macOS rendszerhez",
+ "customNotifications": "Egyéni értesítések",
+ "deploymentSettings": "Üzembe helyezési beállítások",
+ "derivedCredentials": "Származtatott hitelesítő adatok",
+ "deviceActions": "Eszközműveletek",
+ "deviceCategories": "Eszközkategóriák",
+ "deviceCleanUp": "Eszközök adattörlési szabályai",
+ "deviceEnrollmentManagers": "Készülékregisztráció-kezelők",
+ "deviceExecutionStatus": "Eszköz állapota",
+ "deviceLimitEnrollmentRestrictions": "Eszközszámkorlátok beléptetése",
+ "deviceTypeEnrollmentRestrictions": "Eszközplatformra vonatkozó korlátozások beléptetése",
+ "devices": "Eszközök",
+ "discoveredApps": "Detektált alkalmazások",
+ "edgePolicies": "A Microsoft Edge házirendjei",
+ "embeddedSIM": "Mobilhálózati eSIM-profilok (Előzetes verzió)",
+ "enrollDevices": "Eszközök regisztrálása",
+ "enrollmentFailures": "Sikertelen regisztrálások",
+ "enrollmentNotifications": "Regisztrációs értesítések (Előzetes verzió)",
+ "enrollmentRestrictions": "Regisztrációs korlátozások",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange szolgáltatás-összekötők",
+ "failuresForCumulativeQualityUpdates": "A Windows összegző minőségi frissítés hibái",
+ "failuresForDriverUpdates": "A Windows illesztőprogram-frissítés hibái",
+ "failuresForFeatureUpdates": "Szolgáltatás-frissítési hibák",
+ "failuresForQualityUpdates": "A Windows gyorsított frissítés hibái",
+ "featureFlighting": "Funkciótesztelés",
+ "featureUpdateDeployments": "Funkciófrissítések Windows 10-es és újabb verziókhoz",
+ "flighting": "Tesztelés",
+ "fotaUpdate": "Belső vezérlőprogram vezeték nélküli frissítése",
+ "groupPolicy": "Felügyeleti sablonok",
+ "groupPolicyAnalytics": "Csoportházirend-elemzés",
+ "helpSupport": "Súgó és támogatás",
+ "helpSupportReplacement": "Súgó és támogatás ({0})",
+ "iOSAppProvisioning": "iOS-es alkalmazáskiépítési profilok",
+ "incompleteUserEnrollments": "Hiányos felhasználóregisztrációk",
+ "iosUpdates": "iOS-/iPadOS-frissítések",
+ "legacyPcManagement": "Örökölt PC-kezelés",
+ "macOSSoftwareUpdate": "macOS-frissítések",
+ "macOSSoftwareUpdateAccountSummaries": "MacOS-es eszközök telepítési állapota",
+ "macOSSoftwareUpdateCategorySummaries": "Szoftverfrissítések összegzése",
+ "macOSSoftwareUpdateStateSummaries": "frissítések",
+ "managedGooglePlay": "Felügyelt Google Play",
+ "msfb": "Microsoft Store Vállalatoknak",
+ "myPermissions": "Engedélyeim",
+ "notifications": "Értesítések",
+ "officeApps": "Office-alkalmazások",
+ "officeProPlusPolicies": "Office-alkalmazásokra vonatkozó szabályzatok",
+ "onPremise": "Helyszíni",
+ "onPremisesConnector": "Exchange ActiveSync helyszíni összekötő",
+ "onPremisesDeviceAccess": "Exchange ActiveSync-eszközök",
+ "onPremisesManageAccess": "Helyszíni Exchange-hozzáférés",
+ "outOfDateIosDevices": "iOS-eszközök telepítési hibái",
+ "overview": "Áttekintés",
+ "partnerDeviceManagement": "Partnereszköz-kezelés",
+ "perUpdateRingDeploymentState": "Frissítési kör telepítési állapota szerint",
+ "permissions": "Engedélyek",
+ "platformApps": "{0} alkalmazás",
+ "platformDevices": "{0} eszköz",
+ "platformEnrollment": "{0} regisztrációja",
+ "policies": "Szabályzatok",
+ "profiles": "Profilok",
+ "properties": "Tulajdonságok",
+ "reports": "Jelentések",
+ "retireNoncompliantDevices": "Nem megfelelő eszközök kivonása",
+ "retireNoncompliantDevicesPreview": "Nem megfelelő eszközök kivonása (előzetes verzió)",
+ "role": "Szerepkör",
+ "scriptManagement": "Parancsfájlok",
+ "securityBaselines": "Biztonsági alapkonfigurációk",
+ "serviceToServiceConnector": "Exchange Online Connector",
+ "servicenowConnector": "ServiceNow-összekötő",
+ "shellScripts": "Héjszkriptek",
+ "teamViewerConnector": "TeamViewer-összekötő",
+ "telecomeExpenseManagement": "Távközlési költségek kezelése",
+ "tenantAdmin": "Bérlői adminisztrátor",
+ "tenantAdministration": "Bérlői felügyelet",
+ "termsAndConditions": "Feltételek és kikötések",
+ "titles": "Címek",
+ "troubleshoot": "Hibaelhárítás",
+ "troubleshootSupport": "Hibaelhárítás + ügyfélszolgálat",
+ "user": "Felhasználó",
+ "userExecutionStatus": "Felhasználó állapota",
+ "wdacSupplementalPolicies": "Az S mód kiegészítő szabályzatai",
+ "win32CatalogUpdateApp": "A Nagyvállalati alkalmazásfelügyeleti alkalmazások frissítései",
+ "win32CatalogUpdateAppInPreview": "A Windows (Win32) katalógusalkalmazásainak frissítései (előzetes verzió)",
+ "win32CatalogUpdateAppPreviewTitle": "Vállalati alkalmazáskatalógusbeli alkalmazások frissítésekkel (előzetes verzió)",
+ "win32CatalogUpdateAppTitle": "Vállalati alkalmazáskatalógusbeli alkalmazások frissítésekkel",
+ "windows10DriverUpdate": "Illesztőprogram-frissítések Windows 10-es és újabb verziókhoz",
+ "windows10QualityUpdate": "Minőségi frissítések Windows 10-es és újabb verziókhoz",
+ "windows10UpdateRings": "Frissítési körök Windows 10 és újabb verziókhoz",
+ "windows10XPolicyFailures": "Windows 10X-szabályzat hibái",
+ "windows365PartnerConnector": "Windows 365-partnerösszekötők",
+ "windowsDiagnosticData": "Windows-adatok",
+ "windowsEnterpriseCertificate": "Windowsos vállalati tanúsítvány",
+ "windowsManagement": "Parancsfájlok",
+ "windowsSideLoadingKeys": "Közvetlen telepítési kulcsok (Windows)",
+ "windowsSymantecCertificate": "Windows DigiCert-tanúsítvány",
+ "windowsThreatReport": "Veszélyforrás állapota"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Adatok a kijelölt szolgáltatásokból való megnyitásának engedélyezése a felhasználók számára",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "A megőrizni kívánt korábbi PIN-értékek számának kiválasztása"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "Egy letiltási műveletre van szükség az összes megfelelőségi szabályzat esetében.",
- "graceperiod": "Ütemezés (ennyi nappal a nem megfelelő állapot kezdete után)",
- "graceperiodInfo": "Adja meg, hogy a művelet hány nem megfelelő állapotban töltött nap után legyen elindítva a felhasználó eszközén",
- "subtitle": "Adja meg a művelet paramétereit",
- "title": "Műveleti paraméterek"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Elérhetővé tétel a felhasználók számára választható frissítésként",
+ "optionalValue": "Választható",
+ "required": "Elérhetővé tétel a felhasználók számára szükséges frissítésként",
+ "requiredValue": "Szükséges"
},
- "List": {
- "gracePeriodDay": "{0} nappal a nem megfelelő állapot kezdete után",
- "gracePeriodDays": "{0} nappal a nem megfelelő állapot kezdete után",
- "gracePeriodHour": "{0} órával a nem megfelelő állapot kezdete után",
- "gracePeriodHours": "{0} órával a nem megfelelő állapot kezdete után",
- "gracePeriodMinute": "{0} perccel a nem megfelelő állapot kezdete után",
- "gracePeriodMinutes": "{0} perccel a nem megfelelő állapot kezdete után",
- "immediately": "Azonnal",
- "schedule": "Ütemezés",
- "scheduleInfoBalloon": "Nemmegfelelőség utáni napok",
- "subtitle": "Adja meg a nem megfelelő eszközökön végrehajtandó műveletsort",
- "title": "Műveletek"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise-rendszeralkalmazás",
+ "androidForWorkApp": "Felügyelt Google Play Áruházbeli alkalmazás",
+ "androidLobApp": "Üzletági Android-alkalmazás",
+ "androidStoreApp": "Android Áruházbeli alkalmazás",
+ "builtInAndroid": "Beépített Android-alkalmazás",
+ "builtInApp": "Beépített alkalmazás",
+ "builtInIos": "Beépített iOS-alkalmazás",
+ "default": "",
+ "iosIPadOSWebClip": "iOS-/iPadOS-webklip",
+ "iosLobApp": "Üzletági iOS-alkalmazás",
+ "iosStoreApp": "iOS Store-alkalmazás",
+ "iosVppApp": "Volume Purchase Program-alkalmazás iOS rendszerhez",
+ "lineOfBusinessApp": "Üzletági alkalmazás",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Üzletági macOS-alkalmazás",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365-alkalmazások (macOS)",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS-webklip",
+ "macOsVppApp": "Volume Purchase Program-alkalmazás macOS rendszerhez",
+ "managedAndroidLobApp": "Felügyelt üzletági Android-alkalmazás",
+ "managedAndroidStoreApp": "Felügyelt Android Áruházbeli alkalmazás",
+ "managedGooglePlayApp": "Felügyelt Google Play Áruházbeli alkalmazás",
+ "managedGooglePlayPrivateApp": "Felügyelt privát Google Play-alkalmazás",
+ "managedGooglePlayWebApp": "Felügyelt Google Play-webhivatkozás",
+ "managedIosLobApp": "Felügyelt üzletági iOS-alkalmazás",
+ "managedIosStoreApp": "Felügyelt iOS Store-alkalmazás",
+ "microsoftStoreForBusinessApp": "A „Microsoft Store Vállalatoknak” egy alkalmazása",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store Vállalatoknak",
+ "officeSuiteApp": "Microsoft 365-alkalmazások (Windows 10 és újabb)",
+ "webApp": "Webhivatkozás",
+ "windowsAppXLobApp": "AppX-alapú üzletági Windows-alkalmazás",
+ "windowsClassicApp": "Windows-alkalmazás (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 és újabb)",
+ "windowsMobileMsiLobApp": "MSI-alapú üzletági Windows-alkalmazás",
+ "windowsPhone81AppXBundleLobApp": "AppX-alapú üzletági Windows Phone 8.1-alkalmazás",
+ "windowsPhone81AppXLobApp": "AppX-alapú üzletági Windows Phone 8.1-alkalmazás",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 Áruházbeli alkalmazás",
+ "windowsPhoneXapLobApp": "XAP-alapú üzletági Windows Phone-alkalmazás",
+ "windowsStoreApp": "Microsoft Store-alkalmazás (örökölt)",
+ "windowsUniversalAppXLobApp": "Univerzális AppX-alapú üzletági Windows-alkalmazás",
+ "windowsUniversalLobApp": "Univerzális üzletági Windows-alkalmazás",
+ "windowsWebApp": "Windows webes hivatkozás"
+ },
+ "PolicySet": {
+ "appManagement": "Alkalmazáskezelés",
+ "assignments": "Hozzárendelések",
+ "basics": "Alapvető beállítások",
+ "deviceEnrollment": "Eszközök beléptetése",
+ "deviceManagement": "Eszközkezelés",
+ "scopeTags": "Hatókörcímkék",
+ "appConfigurationTitle": "Alkalmazáskonfigurációs szabályzatok",
+ "appProtectionTitle": "Alkalmazásvédelmi szabályzatok",
+ "appTitle": "Alkalmazások",
+ "iOSAppProvisioningTitle": "iOS-es alkalmazáskiépítési profilok",
+ "deviceLimitRestrictionTitle": "Eszközszámkorlátok",
+ "deviceTypeRestrictionTitle": "Eszköztípus-korlátozások",
+ "enrollmentStatusSettingTitle": "Regisztráció állapotát jelző lapok",
+ "windowsAutopilotDeploymentProfileTitle": "Windows AutoPilot Deployment-profilok",
+ "deviceComplianceTitle": "Eszközmegfelelőségi szabályzatok",
+ "deviceConfigurationTitle": "Eszközkonfigurációs profilok",
+ "powershellScriptTitle": "PowerShell-szkriptek"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Az alkalmazás telepítése kényszerítheti az eszköz újraindítását",
+ "basedOnReturnCode": "Viselkedés meghatározása a visszatérési kódok alapján",
+ "force": "Az Intune az eszköz kötelező újraindítását kezdeményezi",
+ "suppress": "Nincs megadott művelet"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Szükséges telepítési idő (perc)",
+ "maxRunTimeInMinutesToolTip": "Azon percek száma, amennyit a rendszer a program telepítésének befejezésére vár. Az alapértelmezett érték 60 perc."
+ },
+ "RunAsAccountOptions": {
+ "system": "Rendszer",
+ "user": "Felhasználó"
+ },
+ "availableUninstall": "Eltávolítás elérhetőségének engedélyezése",
+ "availableUninstallTooltip": "Válassza az Igen lehetőséget, ha lehetővé szeretné tenni a Céges portál felhasználóinak, hogy eltávolíthassák az alkalmazást. Válassza a Nem lehetőséget, ha nem szeretné, hogy a felhasználók eltávolíthassák az alkalmazást a Céges portálról.",
+ "bladeTitle": "Program",
+ "deviceRestartBehavior": "Viselkedés az eszköz újraindításához",
+ "deviceRestartBehaviorTooltip": "Válassza ki az eszköz sikeres alkalmazástelepítés utáni újraindítási viselkedését. Az eszköz a visszatérési kódok konfigurációs beállításai alapján történő újraindításához válassza a Viselkedés meghatározása a visszatérési kódok alapján lehetőséget. Válassza a Nincs megadott művelet lehetőséget az eszköz újraindításának letiltásához az MSI-alapú alkalmazások telepítése során. Válassza Az alkalmazástelepítés kényszerítheti az eszköz újraindítását lehetőséget annak engedélyezéséhez, hogy az alkalmazástelepítés az újraindítások letiltása nélkül befejeződjön. Válassza Az Intune kényszeríti az eszköz kötelező újraindítását lehetőséget ahhoz, hogy sikeres alkalmazástelepítés után mindig újrainduljon az eszköz.",
+ "header": "Adja meg a parancsokat az alkalmazás telepítéséhez és leválasztásához:",
+ "installCommand": "Telepítési parancs",
+ "installCommandMaxLengthErrorMessage": "A telepítési parancs nem lehet hosszabb 1024 karakternél.",
+ "installCommandTooltip": "Az alkalmazás telepítéséhez használt teljes telepítési parancssor.",
+ "runAs32Bit": "Telepítési és leválasztási parancsok futtatása 32 bites folyamatban 64 bites ügyfeleken",
+ "runAs32BitTooltip": "Válassza az Igen lehetőséget az alkalmazás 32 bites folyamatban való telepítéséhez és leválasztásához 64 bites ügyfeleken. Válassza a Nem (alapértelmezett) lehetőséget, ha az alkalmazást 64 bites folyamatban szeretné telepíteni és leválasztani 64 bites ügyfeleken. A 32 bites ügyfelek mindig 32 bites folyamatot fognak használni.",
+ "runAsAccount": "Telepítési viselkedés",
+ "runAsAccountTooltip": "Ha az alkalmazást az összes felhasználó számára szeretné telepíteni, és ez támogatott, válassza a Rendszer lehetőséget. Ha az alkalmazást az eszközön bejelentkezett felhasználó számára szeretné telepíteni, válassza a Felhasználó lehetőséget. A kettős célú MSI-alkalmazások esetében a módosítások mindaddig megakadályozzák a frissítések és az eltávolítások sikeres végrehajtását, amíg vissza nem állítja az eredeti telepítés időpontjában alkalmazott értéket.",
+ "selectorLabel": "Program",
+ "uninstallCommand": "Leválasztási parancs",
+ "uninstallCommandTooltip": "Az alkalmazás eltávolításához használt teljes eltávolítási parancssor."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Továbbiak",
- "additionalRecipients": "További címzettek (e-mailben)",
- "additionalRecipientsBladeTitle": "További címzettek kiválasztása",
- "emailAddressPrompt": "Adja meg az e-mail-címeket (vesszővel elválasztva)",
- "invalidEmail": "Érvénytelen e-mail-cím",
- "messageTemplate": "Üzenetsablon",
- "noneSelected": "Egy elem sincs kijelölve",
- "notSelected": "Nincs kijelölve",
- "numSelected": "{0} kijelölve",
- "selected": "Kijelölve"
- },
- "block": "Eszköz megjelölése nem megfelelőként",
- "lockDevice": "Eszköz zárolása (helyi művelet)",
- "lockDeviceWithPasscode": "Eszköz zárolása (helyi művelet)",
- "noAction": "Nincs művelet",
- "noActionRow": "Nincsenek műveletek; a Hozzáadás gombbal adhat meg műveletet",
- "pushNotification": "Leküldéses értesítés küldése a végfelhasználónak",
- "remoteLock": "Nem megfelelő eszköz távolról zárolása",
- "removeSourceAccessProfile": "Forrás hozzáférési profil eltávolítása",
- "retire": "Eszköz hozzáadása a kivonási listához",
- "wipe": "Adatok törlése",
- "emailNotification": "E-mail küldése a felhasználónak"
- },
- "InstallIntent": {
- "available": "Regisztrált eszközök esetében elérhető",
- "availableWithoutEnrollment": "Regisztrációval vagy anélkül is elérhető",
- "required": "Kötelező",
- "uninstall": "Eltávolítás"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Egyéni szkript létrehozása",
- "edit": "Egyéni szkript szerkesztése"
- },
- "basicInfo": "Létrehozhat egy új egyéni szkriptcsomagot a saját észlelési és javítási szkriptjeiből.",
- "customScriptCapitalized": "Egyéni szkript",
- "customScriptLowercase": "egyéni szkript",
- "detectionScript": "Észlelési szkript"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Kisbetűk használatának engedélyezése a PIN-kódban",
+ "notAllow": "Kisbetűk használatának tiltása a PIN-kódban",
+ "requireAtLeastOne": "Legalább egy kisbetű használatának megkövetelése a PIN-kódban"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Speciális karakterek használatának engedélyezése a PIN-kódban",
+ "notAllow": "Speciális karakterek használatának tiltása a PIN-kódban",
+ "requireAtLeastOne": "Legalább egy speciális karakter használatának megkövetelése a PIN-kódban"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Nagybetűk használatának engedélyezése a PIN-kódban",
+ "notAllow": "Nagybetűk használatának tiltása a PIN-kódban",
+ "requireAtLeastOne": "Legalább egy nagybetű használatának megkövetelése a PIN-kódban"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Új",
+ "createNewResourceAccountInfo": "
\r\nÚj erőforrásfiók létrehozása a regisztráció során. Az erőforrásfiók azonnal bekerül az Erőforrásfiók táblába, de csak az eszköz regisztrálása és a Surface Hub-előfizetés ellenőrzése után lesz aktív. További információ az erőforrás-fiókokról
\r\n ",
+ "createNewResourceTitle": "Új erőforrásfiók létrehozása",
+ "deviceNameInvalid": "Az eszköznév formátuma érvénytelen",
+ "deviceNameRequired": "Az eszköz nevét kötelező megadni",
+ "editResourceAccountLabel": "Szerkesztés",
+ "selectExistingCommandMenu": "Meglévő kiválasztása"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "A nevek legfeljebb 15 karakterből állhatnak, és tartalmazhatnak betűket (a–z, A–Z), számokat (0–9) és kötőjelet. Nem állhatnak csak számokból, és nem tartalmazhatnak szóközt."
+ },
+ "Header": {
+ "addressableUserName": "Felhasználóbarát név",
+ "azureADDevice": "Társított Microsoft Entra-eszköz",
+ "batch": "Csoportcímke",
+ "dateAssigned": "Hozzárendelés dátuma",
+ "deviceAccountPwd": "Szolgáltatásfiók-jelszó",
+ "deviceAccountUpn": "Eszközfiók",
+ "deviceDisplayName": "Eszköznév",
+ "deviceFriendlyName": "Eszköz rövid neve",
+ "deviceName": "Eszköznév",
+ "deviceUseType": "Eszközhasználat típusa",
+ "enrollmentState": "Regisztráció állapota",
+ "intuneDevice": "Társított Intune-eszköz",
+ "lastContacted": "Utolsó kapcsolatlétesítés",
+ "make": "Gyártó:",
+ "model": "Modell",
+ "profile": "Hozzárendelt profil",
+ "profileStatus": "Profil állapota",
+ "purchaseOrderId": "Megrendelőlap",
+ "resourceAccount": "Erőforrásfiók",
+ "serialNumber": "Sorozatszám",
+ "userPrincipalName": "Felhasználó"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Felhasználóbarát név megadása kötelező!",
+ "pwdRequired": "Kötelező megadni a jelszót.",
+ "pwdValidFormat": "Nem sikerült frissíteni a jelszót. Az új jelszóként megadott érték nem felel meg a tartomány hosszúsági vagy összetettségi követelményeinek.",
+ "upnRequired": "Az eszközfiók megadása kötelező",
+ "upnValidFormat": "Az értékek betűket (a-z, A-Z), számokat (0-9) és kötőjeleket tartalmazhatnak. Az értékek nem tartalmazhatnak üres szóközt."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Értekezlet és bemutató",
+ "teamCollaboration": "Csoportalapú együttműködés"
+ },
+ "Devices": {
+ "featureDescription": "A Windows AutoPilot lehetővé teszi a felhasználók kezdőélményének testreszabását.",
+ "importErrorStatus": "Egyes eszközök nem lettek importálva. További információért kattintson ide.",
+ "importPendingStatus": "Az importálás folyamatban van. Eltelt idő: {0} perc. A folyamat akár {1} percig is eltarthat."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "A Microsoft Entrához hibrid módon csatlakoztatva",
+ "activeDirectoryADLabel": "Csatlakoztatás hibrid Microsoft Entrához az Autopilottal",
+ "azureAD": "A Microsoft Entrához csatlakoztatva",
+ "unknownType": "Ismeretlen típus"
+ },
+ "Filter": {
+ "enrollmentState": "Állam",
+ "profile": "Profil állapota"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "A felhasználó felhasználóbarát nevét meg kell adni."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Elnevezési sablon létrehozása, amellyel neveket adhat hozzá az eszközökhöz a regisztráció során.",
+ "label": "Eszköznévsablon alkalmazása"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "Ha az Autopilot üzembehelyezési profilja a Microsoft Entrához hibrid módon csatlakoztatott típusú, az eszközök elnevezése a tartományhoz való csatlakozás konfigurációjában megadott beállítások használatával történik."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "SajátCég – %RAND:4%",
+ "label": "Név megadása",
+ "noDisallowedChars": "A név csak számokból, betűkből és kötőjelekből állhat, illetve a %SERIAL% vagy a %RAND:x% makrót tartalmazhatja",
+ "serialLength": "A %SERIAL% makróval nem lehet 7-nél több karaktert használni",
+ "validateLessThan15Chars": "A név nem lehet hosszabb 15 karakternél",
+ "validateNoSpaces": "A számítógépnevek nem tartalmazhatnak szóközt.",
+ "validateNotAllNumbers": "A névnek betűt és/vagy kötőjelet is kell tartalmaznia",
+ "validateNotEmpty": "A név nem lehet üres",
+ "validateOnlyOneMacro": "A név csak az egyiket tartalmazhatja a %SERIAL% és a %RAND:x% makró közül"
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Egyedi név létrehozása az eszközök számára. A név legfeljebb 15 karakterből állhat, valamint betűt (a-z, A-Z), számot (0-9) és kötőjelet tartalmazhat. A név nem állhat csak számokból, és nem tartalmazhat szóközt. A %SERIAL% makró használatával egy hardverspecifikus sorozatszámot, a %RAND:x% makróval pedig egy véletlenszerű számokból álló sztringet adhat hozzá a névhez (az x helyére a hozzáadandó számjegyek számát kell írni)."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "A kezdőélmény a Windows billentyű 5-szöri megnyomásával, a felhasználó hitelesítése nélküli futtatásának engedélyezése az eszköz regisztrálásához és a rendszerkörnyezet alkalmazásainak és beállításainak kiépítéséhez. A felhasználói környezet alkalmazásait és beállításait akkor küldi el a rendszer, amikor a felhasználó bejelentkezik.",
+ "label": "Előre kiépített üzembe helyezés engedélyezése"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Az Autopilot hibrid Microsoft Entra csatlakoztatási folyamat akkor is folytatódik, ha a kezdőélmény során nem jön létre tartományvezérlői kapcsolat.",
+ "label": "AD-kapcsolatellenőrzés kihagyása"
+ },
+ "accountType": "Felhasználói fiók típusa",
+ "accountTypeInfo": "Adja meg, hogy a felhasználók rendszergazdák vagy általános jogú felhasználók legyenek-e az eszközön. Vegye figyelembe, hogy ez a beállítás nincs hatással a globális és a céges rendszergazdai fiókokra. E fiókok nem lehetnek általános jogú felhasználók, mert a Microsoft Entra ID összes felügyeleti funkciójához hozzáférnek.",
+ "configOOBEInfo": "
",
+ "configureDevice": "Telepítési üzemmód",
+ "configureDeviceHintForSurfaceHub2": "Az Autopilot csak Surface Hub 2 esetén támogatja az öntelepítési módot. Ez a mód nem társítja a felhasználót a regisztrált eszközhöz, ezért nem igényel felhasználói hitelesítő adatokat.",
+ "configureDeviceHintForWindowsPC": "
\r\n A felhasználói affinitás azt szabályozza, hogy az eszközök a felhasználókhoz legyenek-e rendelve, és azt adja meg, hogy meg kell-e adni a felhasználói hitelesítő adatokat az eszköz üzembe helyezéséhez.\r\n
\r\n
\r\n
\r\n Regisztráció felhasználói affinitással: A rendszer az adott eszközt regisztráló felhasználóhoz rendeli hozzá az eszközöket, és felhasználói hitelesítő adatok szükségesek az eszköz üzembe helyezéséhez.\r\n
\r\n
\r\n Regisztráció felhasználói affinitás nélkül (előzetes verzió): Az eszközök nincsenek az adott eszközt regisztráló felhasználókhoz rendelve, és nem szükségesek felhasználói hitelesítő adatok az eszköz üzembe helyezéséhez\r\n
\r\n
",
+ "createSurfaceHub2Info": "A Surface Hub 2 eszközök Autopilot-regisztrációs beállításainak konfigurálása. Alapértelmezés szerint az Autopilot lehetővé teszi a felhasználói hitelesítés kihagyását a kezdőélmény (OOBE) során. További információ a Surface Hub 2-höz készül Windows Autopilotról.",
+ "createWindowsPCInfo": "\r\n
\r\nAz AutoPilot-eszközök alábbi beállításai automatikusan engedélyezve vannak az öntelepítési módban:\r\n
\r\n
\r\n
\r\n Munkahelyi vagy Otthoni használat kiválasztásának kihagyása\r\n
\r\n
\r\n OEM-regisztráció és OneDrive-konfiguráció kihagyása\r\n
\r\n
\r\n A felhasználó kezdőélményben történő hitelesítésének kihagyása\r\n
\r\n
",
+ "endUserDevice": "Felhasználó által vezérelt",
+ "hideEscapeLink": "Fiókváltási lehetőségek elrejtése",
+ "hideEscapeLinkInfo": "A fiókváltás és a másik fiókkal való újrakezdés lehetőségei a céges bejelentkezési lapon, illetve a tartományhibalapon jelennek meg a kezdeti eszközbeállítás során. A beállítások elrejtéséhez be kell állítania a vállalati védjegyzést a Microsoft Entra ID-ben (a Windows 10 1809-es vagy újabb verziója, vagy Windows 11 szükséges).",
+ "info": "Az AutoPilot-profil beállításai határozzák meg a felhasználói kezdőélményt a Windows első indításakor. ",
+ "language": "Nyelv (régió)",
+ "languageInfo": "Adja meg a használandó nyelvet és régiót.",
+ "licenseAgreement": "Microsoft szoftverlicenc-szerződés",
+ "licenseAgreementInfo": "Adja meg, hogy a végfelhasználói licencszerződés megjelenjen-e a felhasználóknak.",
+ "plugAndForgetDevice": "Önálló központi telepítés",
+ "privacySettingWarning": "Megváltozott a diagnosztikai adatgyűjtés alapértelmezett értéke a Windows 10 1903-as és újabb, vagy Windows 11 verziókat futtató eszközökön. ",
+ "privacySettings": "Adatvédelmi beállítások",
+ "privacySettingsInfo": "Adja meg, hogy az adatvédelmi beállítások megjelenjenek-e a felhasználóknak.",
+ "showCortanaConfigurationPage": "Cortana-konfiguráció",
+ "showCortanaConfigurationPageInfo": "A megjelenítés lehetővé teszi a Cortana-konfiguráció bevezetését a beállítás során.",
+ "skipEULAWarning": "Fontos információ a licencfeltételek elrejtéséről",
+ "skipKeyboardSelection": "Billentyűzet automatikus konfigurálása",
+ "skipKeyboardSelectionInfo": "Ha az értéke igaz, a rendszer kihagyja a billentyűzet-kiválasztási lapot, amennyiben a nyelv be van beállítva.",
+ "subtitle": "AutoPilot-profilok",
+ "title": "Kezdőélmény (OOBE)",
+ "useOSDefaultLanguage": "Operációs rendszer alapértelmezése",
+ "userSelect": "Felhasználó kiválasztása"
},
+ "Sync": {
+ "lastRequestedLabel": "Legutóbbi szinkronizálási kérelem",
+ "lastSuccessfulLabel": "Utolsó sikeres szinkronizálás",
+ "syncInProgress": "A szinkronizálás folyamatban van. Kis idő múlva térjen vissza.",
+ "syncInitiated": "Megkezdődött az AutoPilot-beállítások szinkronizálása.",
+ "syncSettingsTitle": "AutoPilot-beállítások szinkronizálása"
+ },
+ "Title": {
+ "devices": "Windows AutoPilot-eszközök"
+ },
+ "Tooltips": {
+ "addressableUserName": "Az eszköz beállítása során megjelenített üdvözlési név.",
+ "azureADDevice": "Tekintse meg a hozzárendelt eszköz adatait. Az N/A azt jelzi, hogy nincs hozzárendelt eszköz.",
+ "batch": "Eszközök csoportjának azonosítására használható sztringattribútum. Az Intune Csoportcímke mezője a Microsoft Entra-eszközök OrderID attribútumára van leképezve.",
+ "dateAssigned": "A profil az eszközhöz való hozzárendelésének időbélyege.",
+ "deviceAccountPwd": "Az eszközfiók jelszava Surface Hub-eszközökhöz. Ha meg lett adva, adja meg az eszközfiókot és a felhasználóbarát nevet is.",
+ "deviceAccountUpn": "Az eszközfiók e-mail-címe Surface Hub-eszközökhöz. Ha meg lett adva, adja meg az eszközfiók jelszavát és felhasználóbarát nevét is.",
+ "deviceDisplayName": "Adjon egyedi nevet az eszköznek. A rendszer figyelmen kívül hagyja ezt a nevet a hibrid Microsoft Entrához csatlakozó üzemelő példányoknál. Az eszköz neve továbbra is a hibrid Microsoft Entra-eszközök tartományhoz való csatlakoztatási profiljából származik.",
+ "deviceFriendlyName": "Az eszközfiók felhasználóbarát neve Surface Hub-eszközökhöz. Ha meg lett adva, adja meg az eszközfiókot és az eszközfiók jelszavát is.",
+ "deviceName": "A rendszer ezt a nevet jeleníti meg, amikor valaki megpróbálja felderíteni és csatlakoztatni az eszközt.",
+ "deviceUseType": " Az eszköz beállítása az Ön a választásain alapul. Később bármikor módosíthatja a beállításokat.\r\n
\r\n
Értekezletek és bemutatók alkalmával a Windows Hello nincs bekapcsolva, és az adatok minden munkamenet után törlődnek.\r\n
\r\n
Csoportalapú együttműködés esetén a Windows Hello be van kapcsolva, és a profilokat menti a rendszer, hogy felgyorsítsa a bejelentkezést
\r\n
",
+ "enrollmentState": "Azt adja meg, hogy az eszköz regisztrálva van-e.",
+ "intuneDevice": "Tekintse meg a hozzárendelt eszköz adatait. Az N/A azt jelzi, hogy nincs hozzárendelt eszköz.",
+ "lastContacted": "Az eszközzel való legutóbbi kapcsolatfelvétel időbélyege.",
+ "make": "A kiválasztott eszköz gyártója.",
+ "model": "A kiválasztott eszköz modellje",
+ "profile": "Az eszközhöz rendelt profil neve.",
+ "profileStatus": "Azt adja meg, hogy van-e hozzárendelve profil az eszközhöz.",
+ "purchaseOrderId": "Beszerzési rendelés azonosítója",
+ "resourceAccount": "Az eszköz identitása vagy egyszerű felhasználóneve (UPN).",
+ "serialNumber": "A kiválasztott eszköz sorszáma.",
+ "userPrincipalName": "Az eszköz beállítása során a hitelesítés előzetes kitöltéséhez használt felhasználó."
+ },
+ "allDevices": "Minden eszköz",
+ "allDevicesAlreadyAssignedError": "Egy Autopilot-profil már hozzá van rendelve az összes eszközhöz.",
+ "assignFailedDescription": "Nem sikerült frissíteni a(z) {0} hozzárendeléseit.",
+ "assignFailedTitle": "Nem sikerült frissíteni az AutoPilot-profil hozzárendeléseit.",
+ "assignSuccessDescription": "A(z) {0} hozzárendeléseinek frissítése sikerült.",
+ "assignSuccessTitle": "Az AutoPilot-profil hozzárendeléseinek frissítése sikerült.",
+ "assignSufaceHub2ProfileNextStep": "Az üzembe helyezés következő lépései",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Rendelje hozzá ezt a profilt legalább egy eszközcsoporthoz",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Rendeljen hozzá egy erőforrásfiókot minden olyan Surface Hub-eszközhöz, amelyhez telepíti ezt a profilt",
+ "assignedDevicesCount": "Hozzárendelt készülékek",
+ "assignedDevicesResourceAccountDescription": "
A profilnak egy eszközre való telepítéséhez hozzá kell rendelnie az eszközt egy erőforrás-fiókhoz. Jelöljön ki egyszerre egy eszközt egy meglévő erőforrásfiók hozzárendeléséhez vagy egy új létrehozásához. További információ az erőforrás-fiókokról
",
+ "assignedDevicesResourceAccountStatusBarMessage": "Ez a tábla csak a profilhoz hozzárendelt Surface Hub 2 eszközöket sorolja fel.",
+ "assigningDescription": "A(z) {0} hozzárendeléseinek frissítése folyamatban van.",
+ "assigningTitle": "Az AutoPilot-profil hozzárendeléseinek frissítése folyamatban van.",
+ "autoremediationContext": "Hardverváltozást észleltünk az eszközön. Megpróbáljuk automatikusan regisztrálni az új hardvert. Most nincs teendője, az állapot a következő bejelentkezéskor frissül az eredménnyel. További információ a profil alaphelyzetbe állításáról.",
+ "autoremediationTitle": "A(z) {0}. eszköz javítása függőben van",
+ "cannotDeleteMessage": "A profil csoportokhoz van hozzárendelve. Minden csoport a profilhoz való hozzárendelését meg kell szüntetni ahhoz, hogy azt törölni lehessen.",
+ "cannotDeleteTitle": "Nem törölhető: {0}",
+ "createdDateTime": "Létrehozva",
+ "deleteMessage": "Ha törli ezt az AutoPilot-profilt, a profilhoz hozzárendelt összes eszköz „Nincs hozzárendelve” állapotú lesz.",
+ "deleteMessageWithPolicySet": "A(z) {0} egy vagy több szabályzatkészletben szerepel. A(z) {0} törlése után a továbbiakban nem tudja hozzárendelni a szabályzatkészleteken keresztül.",
+ "deleteTitle": "Biztosan törli ezt a profilt?",
+ "description": "Leírás",
+ "deviceType": "Eszköztípus",
+ "deviceUse": "Eszköz használata",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Az Autopilot csak a Surface Hub 2 eszközöknél támogatja a Microsoft Entrához csatlakoztatott beállítást. Adja meg, hogyan csatlakoznak az eszközök az Active Directoryhoz (AD) a szervezetben.\r\n
\r\n
\r\n
\r\n Microsoft Entrához csatlakozott: Csak felhőalapú, nincs helyszíni Windows Server Active Directory.\r\n
\r\n Adja meg, hogyan csatlakozhatnak az eszközök az Active Directoryhoz (AD) a munkahelyen:\r\n
\r\n
\r\n
\r\n Microsoft Entrához csatlakoztatott: Csak felhőalapú, nincs helyszíni Windows Server Active Directory\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Hiba történt a hozzárendelt eszközök számának beolvasása során.",
+ "getAssignmentsError": "Hiba történt az AutoPilot-profilok hozzárendeléseinek beolvasása során.",
+ "harvestDeviceId": "Minden megcélzott eszköz AutoPilot-eszközzé alakítása",
+ "harvestDeviceIdDescription": "Ez a profil alapértelmezés szerint csak az AutoPilot szolgáltatásból szinkronizált AutoPilot-eszközökre alkalmazható.",
+ "harvestDeviceIdInfo": "\r\n Válassza az Igen lehetőséget az összes céleszköz regisztrálásához az Autopilotban, ha még nincsenek regisztrálva. A regisztrált eszközökön a Windows kezdőélmény (OOBE) legközelebbi futtatásakor a rendszer a hozzárendelt Autopilot-forgatókönyvet fogja megvalósítani.\r\n \r\n Vegye figyelembe, hogy egyes Autopilot-forgatókönyvekhez meghatározott minimális Windows-buildek szükségesek. Győződjön meg arról, hogy az eszköze rendelkezik a forgatókönyv megvalósításához szükséges minimális builddel.\r\n \r\n A profil eltávolítása az érintett eszközöket nem távolítja el az Autopilotból. Ha el szeretne távolítani egy eszközt az Autopilotból, használja a Windows Autopilot-eszközök nézetet.\r\n ",
+ "harvestDeviceIdWarning": "Átalakítás után az Autopilot-eszközök csak akkor állíthatók vissza, ha törli őket az Autopilot-eszközök listájából.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "A Windows AutoPilot-telepítési profil lehetővé teszi a kezdőélmény testreszabását az eszközökön.",
+ "invalidProfileNameMessage": "A(z) {0} karakter használata nem engedélyezett",
+ "joinTypeLabel": "A Microsoft Entra ID csatlakoztatása a következőként:",
+ "lastModifiedDateTime": "Utolsó módosítás:",
+ "manualRemediationContext": "Hardverváltozást észleltünk az eszközön. Alaphelyzetbe állításakor nem kap automatikusan Autopilot-profilt, hacsak nem regisztrálja újra az eszközt. További információ a profil alaphelyzetbe állításáról.",
+ "manualRemediationTitle": "A(z) {0}. eszköz beavatkozást igényel",
+ "name": "Név",
+ "noAutopilotProfile": "Nincsenek AutoPilot-profilok",
+ "notEnoughPermissionAssignedError": "Nem rendelkezik a megfelelő engedélyekkel a profil egy vagy több kiválasztott csoporthoz történő hozzárendeléséhez. Forduljon a rendszergazdához.",
+ "profile": "profil",
+ "resourceAccountStatusBarMessage": "Minden olyan Surface Hub 2 eszköz esetében, amelyen ezt a profilt telepíti, meg kell adni egy erőforrás-fiókot. További információért kattintson ide.",
+ "selectServices": "Azon címtárszolgáltatások megadása, amelyekhez az eszközök csatlakozni fognak",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Telepítési üzemmód",
+ "windowsPCCommandMenu": "Windows rendszerű számítógép",
+ "directoryServiceLabel": "Csatlakozás a Microsoft Entra ID-hez a következőként:"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Felügyelt eszközök",
+ "devicesWithoutEnrollment": "Felügyelt alkalmazások"
+ },
+ "AppProtection": {
+ "allAppTypes": "Célzás minden alkalmazástípusra",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Androidos munkahelyi profilban lévő alkalmazások",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Alkalmazások a Microsoft Entra megosztott módot használó dedikált Android Enterprise-eszközökön",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Androidos nyílt forráskódú projektben található alkalmazások társított felhasználóval",
+ "appsOnAndroidOpenSourceProjectUserless": "Androidos nyílt forráskódú projektben található alkalmazások felhasználó nélkül",
+ "appsOnIntuneManagedDevices": "Az Intune által felügyelt eszközökön lévő alkalmazások",
+ "appsOnUnmanagedDevices": "A nem felügyelt eszközökön lévő alkalmazások",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Nem érhető el",
+ "windows10PlatformLabel": "Windows 10 és újabb rendszerek",
+ "withEnrollment": "Regisztrációval",
+ "withoutEnrollment": "Regisztráció nélkül"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "A Project Online asztali ügyfele",
+ "visioProRetail": "Visio Online 2. csomag"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Nem sikerült a(z) {0} törlése",
+ "failureCa": "Nem sikerült törölni a(z) {0} elemet, mert a CA-házirendek hivatkoznak rá",
+ "modifying": "A(z) {0} törlése",
+ "success": "A(z) {0} törlése sikerült"
+ },
+ "Notify": {
+ "failure": "Nem sikerült frissíteni a(z) {0} alkalmazást",
+ "modifying": "{0} módosítása folyamatban",
+ "success": "A(z) {0} frissítése sikeresen megtörtént"
+ },
+ "menuLabel": "Hitelesítési környezet"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "További információ az összevonási szolgáltatók előírásainak megfelelő hitelesítési módszerek megköveteléséről.",
+ "certificate": "Tanúsítványalapú hitelesítés",
+ "infoBubble": "Adja meg az összevonási szolgáltatóra (például az AD FS-re) nézve kötelezően használandó hitelesítési módszert.",
+ "multifactor": "Többtényezős hitelesítés",
+ "require": "Összevont hitelesítési módszer megkövetelése (Előzetes verzió)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Az állandó böngésző-munkamenetre vonatkozó szabályzat csak akkor működik megfelelően, ha a „Minden felhőalkalmazás” lehetőség van kiválasztva. Frissítse a felhőalkalmazások kijelölését."
+ },
+ "Option": {
+ "always": "Mindig állandó",
+ "help": "Az állandó böngésző-munkamenet lehetővé teszi a felhasználók számára, hogy a böngészőablak bezárása és újbóli megnyitása után bejelentkezve maradjanak. \n
\n
A beállítás a „Minden felhőalkalmazás” lehetőség kiválasztásakor működik megfelelően.
\n
Ez nincs hatással a jogkivonat-élettartam és a bejelentkezési gyakoriság beállítására.
\n
Ezzel a beállítással felülbírálja a vállalati védjegyezésben megadott „Bejelentkezve maradok lehetőség megjelenítése” szabályzatot.
\n
A „Soha nem állandó” beállítás minden összevont hitelesítési szolgáltatásból beküldött állandó egyszeri bejelentkezési jogcímet felülbírál.
\n
A „Soha nem állandó” beállítás megakadályozza az egyszeri bejelentkezést mobileszközökön az alkalmazások között, illetve az alkalmazások és a felhasználó mobilböngészője között.
\n",
+ "label": "Állandó böngésző-munkamenet",
+ "never": "Soha nem állandó"
+ },
+ "Warning": {
+ "allApps": "Az állandó böngésző-munkamenet csak akkor működik megfelelően, ha a Minden felhőalkalmazás lehetőség van kiválasztva. Módosítsa a felhőalkalmazások kijelölését. További információkért kattintson ide."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Óra vagy nap",
+ "value": "Gyakoriság"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} nap",
+ "singular": "1 nap"
+ },
+ "Hour": {
+ "plural": "{0} óra",
+ "singular": "1 óra"
+ },
+ "daysOption": "Nap",
+ "everytime": "Minden alkalommal",
+ "help": "Az az időtartam, amely után a felhasználónak be kell jelentkeznie, ha megpróbál hozzáférni egy erőforráshoz. Az alapértelmezett beállítás 90 nap folyamatos számlálással, azaz a felhasználónak akkor kell újból hitelesítést végeznie, amikor először próbál meg hozzáférni egy erőforráshoz, miután 90 napig vagy annál tovább nem volt aktív a számítógépén.",
+ "hoursOption": "Óra",
+ "label": "Bejelentkezés gyakorisága",
+ "placeholder": "Válasszon egységet"
+ }
+ },
+ "mainOption": "Munkamenet-élettartam módosítása",
+ "mainOptionHelp": "Konfigurálhatja, hogy a rendszer milyen gyakran kérjen be adatokat a felhasználóktól, és milyen gyakran őrizze meg a böngésző-munkameneteket. Előfordulhat, hogy azok az alkalmazások, amelyek nem támogatják a modern hitelesítési protokollokat, nem tartják be ezeket a szabályzatokat. Ebben az esetben lépjen kapcsolatba az adott alkalmazás fejlesztőjével."
+ },
+ "SingleSelectorActive": {
+ "failed": "Nem sikerült betölteni ezeket az adatokat.",
+ "reattempt": "Adatok betöltése: {0}. újbóli kísérlet összesen {1} kísérletből."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Címtárbeli szerepkörök kiválasztása"
+ },
+ "Excluded": {
+ "gridAria": "Kizárt felhasználók listája"
+ },
+ "Included": {
+ "gridAria": "Belefoglalt felhasználók listája"
+ },
+ "Validation": {
+ "customRoleIncluded": "A címtárszerepkörök legalább egy egyéni szerepkört foglalnak magukban",
+ "customRoleSelected": "Legalább egy egyéni szerepkör van kiválasztva",
+ "failed": "A(z) „{0}” beállítás konfigurálása kötelező",
+ "roles": "Válasszon ki legalább egy szerepkört",
+ "usersGroups": "Válasszon ki legalább egy felhasználót vagy csoportot"
+ },
+ "learnMore": "A hozzáférés-vezérlés azon alapszik, hogy kire érvényes a szabályzat, például felhasználókra és csoportokra, számításifeladat-identitásokra, címtárbeli szerepkörökre vagy külső vendégekre."
+ },
+ "advancedTabText": "Speciális",
+ "allCloudAppsErrorBox": "A Minden felhőalkalmazás lehetőséget kell kiválasztani, ha a Jelszómódosítás megkövetelése engedély van kiválasztva",
+ "allCloudAppsReauth": "A „Minden felhőalkalmazás” beállítást be kell jelölni, ha a „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő és a „Bejelentkezési kockázat“ feltétel van kiválasztva",
+ "allCloudOrSpecificApps": "A „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „minden felhőalkalmazás” vagy a kifejezetten támogatott alkalmazások kiválasztását",
+ "allDayCheckboxLabel": "Egész nap",
+ "allDevicePlatforms": "Bármely eszköz",
+ "allGuestUserInfoContent": "Tartalmazza a Microsoft Entra B2B-vendégeket, de a SharePoint B2B-vendégek nem",
+ "allGuestUserLabel": "Minden vendég- és külső felhasználó",
+ "allRiskLevelsOption": "Minden kockázati szint",
+ "allTrustedLocationLabel": "Minden megbízható hely",
+ "allUserGroupSetSelectorLabel": "Minden kiválasztott felhasználó és csoport",
+ "allUsersReauth": "A „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „Minden felhasználó” bejelölését",
+ "allUsersString": "Minden felhasználó",
+ "and": "{0} ÉS {1} ",
+ "andWithGrouping": "({0}) ÉS {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Bármely felhőalkalmazás",
+ "appContextOptionInfoContent": "Kért hitelesítési címke",
+ "appContextOptionLabel": "Kért hitelesítési címke (Előnézet)",
+ "appContextUriPlaceholder": "Példa: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Az alkalmazás által kényszerített korlátozások további adminisztrátori beállításokat követelhetnek meg a felhőalkalmazásokban. A korlátozások csak új munkamenetekhez kapcsolódóan lépnek életbe.",
+ "appNotSetSeletorLabel": "0 felhőalkalmazás kiválasztva",
+ "appReauthNotSupported": "Ez az alkalmazás nem támogatja a „Bejelentkezés gyakorisága minden alkalom” munkamenet-vezérlőt.",
+ "applyConditionClientAppInfoBalloonContent": "Ügyfélalkalmazások konfigurálása a szabályzat adott ügyfélalkalmazásokra való érvényesítéséhez",
+ "applyConditionDevicePlatformInfoBalloonContent": "Eszközplatformok konfigurálása a szabályzat adott platformokra való érvényesítéséhez",
+ "applyConditionDeviceStateInfoBalloonContent": "Eszközállapot konfigurálása a szabályzat adott eszközállapot(ok)ra való érvényesítéséhez",
+ "applyConditionLocationInfoBalloonContent": "Helyek konfigurálása a szabályzat megbízható/nem megbízható helyekre való érvényesítéséhez",
+ "applyConditionSigninRiskInfoBalloonContent": "A bejelentkezési kockázat konfigurálása a szabályzat kiválasztott kockázati szint(ek)re való érvényesítéséhez",
+ "applyConditionUserRiskInfoBalloonContent": "A felhasználói kockázat konfigurálása a szabályzat kiválasztott kockázati szint(ek)re való érvényesítéséhez",
+ "applyConditonLabel": "Konfigurálás",
+ "ariaLabelPolicyDisabled": "A szabályzat le van tiltva",
+ "ariaLabelPolicyEnabled": "A szabályzat engedélyezve van",
+ "ariaLabelPolicyReportOnly": "A szabályzat „Csak jelentés” üzemmódban van",
+ "blockAccess": "Hozzáférés letiltása",
+ "builtInDirectoryRoleLabel": "Beépített címtárszerepkörök",
+ "casCustomControlInfo": "Az egyéni szabályzatokat Cloud App Security portálon kell konfigurálni. Ez a vezérlő azonnal használható a kiemelt alkalmazásokhoz, és önállóan bevezethető bármely alkalmazáshoz. A két forgatókönyvvel kapcsolatos további információért kattintson ide.",
+ "casInfoBubble": "Ez a vezérlő számos felhőalapú alkalmazások esetében használható.",
+ "casPreconfiguredControlInfo": "Ez a vezérlő azonnal használható a kiemelt alkalmazásokhoz, és önállóan bevezethető bármely alkalmazáshoz. A két forgatókönyvvel kapcsolatos további információért kattintson ide.",
+ "cert64DownloadCol": "Base64-tanúsítvány letöltése",
+ "cert64Name": "Base64 VPN-tanúsítvány",
+ "certDownloadCol": "Tanúsítvány letöltése",
+ "certDurationCol": "Lejárat",
+ "certDurationStartCol": "Érvényesség kezdete",
+ "certName": "VPN-tanúsítvány",
+ "certainApps": "Csak bizonyos alkalmazások támogatottak a „Bejelentkezési gyakoriság minden alkalommal“ beállítás esetében, ha a „Többtényezős hitelesítés megkövetelése“ és a „Jelszómódosítás megkövetelése“ engedély nincs kiválasztva",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Alkalmazások kiválasztása",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Kiválasztott alkalmazások",
+ "chooseApplicationsEmpty": "Nincsenek alkalmazások",
+ "chooseApplicationsNone": "Egyik sem",
+ "chooseApplicationsNoneFound": "A(z) {0} felhasználó nem található. Adjon meg egy másik nevet vagy azonosítót.",
+ "chooseApplicationsPlural": "{0} és {1} további",
+ "chooseApplicationsReAuthEverytimeInfo": "Az alkalmazást keresi? Egyes alkalmazások nem használhatók az „Újrahitelesítés megkövetelése – minden alkalommal” munkamenet-vezérlővel",
+ "chooseApplicationsRemove": "Eltávolítás",
+ "chooseApplicationsReturnedPlural": "{0} alkalmazás található",
+ "chooseApplicationsReturnedSingular": "1 alkalmazás található",
+ "chooseApplicationsSearchBalloon": "Alkalmazás keresése név vagy azonosító megadásával.",
+ "chooseApplicationsSearchHint": "Alkalmazások keresése...",
+ "chooseApplicationsSearchLabel": "Alkalmazások",
+ "chooseApplicationsSearching": "Keresés...",
+ "chooseApplicationsSelect": "Kijelölés",
+ "chooseApplicationsSelected": "Kiválasztva",
+ "chooseApplicationsSingular": "{0} és 1 további",
+ "chooseApplicationsTooMany": "Nem jeleníthető meg az összes eredmény. Szűrje az eredményeket a keresési mező használatával.",
+ "chooseLocationCorpnetItem": "Vállalati hálózat",
+ "chooseLocationSelectedLocationsLabel": "Kijelölt helyek",
+ "chooseLocationTrustedIpsItem": "Többtényezős hitelesítés megbízható IP-címei",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Helyek kiválasztása",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Kiválasztott helyek",
+ "chooseLocationsEmpty": "Nincsenek helyek",
+ "chooseLocationsExcludedSelectorTitle": "Kijelölés",
+ "chooseLocationsIncludedSelectorTitle": "Kijelölés",
+ "chooseLocationsNone": "Egyik sem",
+ "chooseLocationsNoneFound": "A(z) {0} felhasználó nem található. Adjon meg egy másik nevet vagy azonosítót.",
+ "chooseLocationsPlural": "{0} és {1} további",
+ "chooseLocationsRemove": "Eltávolítás",
+ "chooseLocationsReturnedPlural": "A rendszer {0} helyet talált",
+ "chooseLocationsReturnedSingular": "A rendszer 1 helyet talált",
+ "chooseLocationsSearchBalloon": "Hely keresése név megadásával.",
+ "chooseLocationsSearchHint": "Helyek keresése...",
+ "chooseLocationsSearchLabel": "Helyek",
+ "chooseLocationsSearching": "Keresés...",
+ "chooseLocationsSelect": "Kijelölés",
+ "chooseLocationsSelected": "Kijelölt",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Kijelölés",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Kijelölés",
+ "chooseLocationsSingular": "{0} és 1 további",
+ "chooseLocationsTooMany": "Nem jeleníthető meg az összes eredmény. Szűrje az eredményeket a keresési mező használatával.",
+ "claimProviderAddCommandText": "Új egyéni vezérlő",
+ "claimProviderAddNewBladeTitle": "Új egyéni vezérlő",
+ "claimProviderDeleteCommand": "Törlés",
+ "claimProviderDeleteDescription": "Biztos, hogy törli a(z) {0} hálózatot? Ez a művelet nem vonható vissza.",
+ "claimProviderDeleteTitle": "Folytatja?",
+ "claimProviderEditInfoText": "Adja meg a jogcímszolgáltatóktól kapott, egyéni vezérlőkhöz tartozó JSON-t.",
+ "claimProviderNotificationCreateDescription": "A(z) „{0}” nevű egyéni vezérlő létrehozása",
+ "claimProviderNotificationCreateFailedDescription": "A(z) „{0}” nevű egyéni vezérlő létrehozása sikertelen. Próbálkozzon újra később.",
+ "claimProviderNotificationCreateFailedTitle": "Nem sikerült létrehozni az egyéni vezérlőt",
+ "claimProviderNotificationCreateSuccessDescription": "A(z) „{0}” nevű egyéni vezérlő létrehozva",
+ "claimProviderNotificationCreateSuccessTitle": "Hálózat ({0}) létrehozva",
+ "claimProviderNotificationCreateTitle": "Hálózat ({0}) létrehozása",
+ "claimProviderNotificationDeleteDescription": "A(z) „{0}” nevű egyéni vezérlő törlése",
+ "claimProviderNotificationDeleteFailedDescription": "A(z) „{0}” nevű egyéni vezérlő törlése sikertelen. Próbálkozzon újra később.",
+ "claimProviderNotificationDeleteFailedTitle": "Nem sikerült törölni az egyéni vezérlőt",
+ "claimProviderNotificationDeleteSuccessDescription": "A(z) „{0}” nevű egyéni vezérlő törölve",
+ "claimProviderNotificationDeleteSuccessTitle": "A(z) {0} hálózat törölve",
+ "claimProviderNotificationDeleteTitle": "A(z) {0} törlése",
+ "claimProviderNotificationUpdateDescription": "A(z) „{0}” nevű egyéni vezérlő frissítése",
+ "claimProviderNotificationUpdateFailedDescription": "A(z) „{0}” nevű egyéni vezérlő frissítése sikertelen. Próbálkozzon újra később.",
+ "claimProviderNotificationUpdateFailedTitle": "Nem sikerült frissíteni az egyéni vezérlőt",
+ "claimProviderNotificationUpdateSuccessDescription": "A(z) „{0}” nevű egyéni vezérlő frissítve",
+ "claimProviderNotificationUpdateSuccessTitle": "A(z) {0} hálózat frissítve",
+ "claimProviderNotificationUpdateTitle": "A(z) {0} hálózat frissítése",
+ "claimProviderValidationAppIdInvalid": "Az „AppId” értéke érvénytelen. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationClientIdMissing": "Az adatokból hiányzik a „ClientId” érték. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationControlClaimsRequestedMissing": "A „Control” elem nem tartalmaz „ClaimsRequested” értéket. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "A „ClaimsRequested” elem nem tartalmaz „Type” értéket. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationControlIdAlreadyExists": "A „Control” elem „Id” értéke már létezik. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationControlIdMissing": "A „Control” elem nem tartalmaz „Id” értéket. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "A „Control” elem „Id” értéke nem távolítható el, mert meglévő szabályzat hivatkozik rá. Távolítsa el a szabályzatból előbb.",
+ "claimProviderValidationControlIdTooManyControls": "A Control tulajdonság túl sok vezérlőelemet tartalmaz. Tekintse át, majd próbálkozzon újra.",
+ "claimProviderValidationControlIdValueReserved": "A „Control” elem „Id” értéke fenntartott kulcsszó, használjon más azonosítót.",
+ "claimProviderValidationControlNameAlreadyExists": "A „Control” elem „Name” értéke már létezik. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationControlNameMissing": "A „Control” nem tartalmaz „Name” értéket. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationControlsMissing": "Az adatokból hiányzik a „Controls” érték. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationDiscoveryUrlMissing": "Az adatokból hiányzik a „DiscoveryUrl” érték. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationInvalid": "A megadott adatok érvénytelenek. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationInvalidJsonDefinition": "Nem lehet menteni az egyéni vezérlőt. Tekintse át a JSON-szöveget, és próbálkozzon újra.",
+ "claimProviderValidationNameAlreadyExists": "A „Name” érték már létezik. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationNameMissing": "Az adatokból hiányzik a „Name” érték. Tekintse át, és próbálkozzon újra.",
+ "claimProviderValidationUnknown": "A megadott adatok ellenőrzése közben ismeretlen hiba történt. Tekintse át, és próbálkozzon újra.",
+ "claimProvidersNone": "Nincs egyéni vezérlő",
+ "claimProvidersSearchPlaceholder": "Keressen vezérlőket.",
+ "classicPoilcyFilterTitle": "Megjelenítés",
+ "classicPolicyAllPlatforms": "Összes platform",
+ "classicPolicyClientAppBrowserAndNative": "Böngésző, mobilalkalmazások és asztali ügyfelek",
+ "classicPolicyCloudAppTitle": "Felhőalkalmazás",
+ "classicPolicyControlAllow": "Engedélyezés",
+ "classicPolicyControlBlock": "Blokk",
+ "classicPolicyControlBlockWhenNotAtWork": "Hozzáférés letiltása a munkahelyen kívül",
+ "classicPolicyControlRequireCompliantDevice": "Megfelelő eszköz megkövetelése",
+ "classicPolicyControlRequireDomainJoinedDevice": "Tartományhoz csatlakoztatott eszköz megkövetelése",
+ "classicPolicyControlRequireMfa": "Többtényezős hitelesítés megkövetelése",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Többtényezős hitelesítés megkövetelése a munkahelyen kívül",
+ "classicPolicyDeleteCommand": "Törlés",
+ "classicPolicyDeleteFailTitle": "Nem sikerült törölni a klasszikus szabályzatot",
+ "classicPolicyDeleteInProgressTitle": "Klasszikus szabályzat törlése",
+ "classicPolicyDeleteSuccessTitle": "Klasszikus szabályzat törölve",
+ "classicPolicyDetailBladeTitle": "Részletek",
+ "classicPolicyDisableCommand": "Letiltás",
+ "classicPolicyDisableConfirmation": "Biztosan letiltja a(z) {0} szabályzatot? Ez a művelet nem vonható vissza.",
+ "classicPolicyDisableFailDescription": "Nem sikerült letiltani a(z) {0} szabályzatot",
+ "classicPolicyDisableFailTitle": "Nem sikerült letiltani a klasszikus szabályzatot",
+ "classicPolicyDisableInProgressDescription": "A(z) {0} szabályzat letiltása",
+ "classicPolicyDisableInProgressTitle": "Klasszikus szabályzat letiltása",
+ "classicPolicyDisableSuccessDescription": "A(z) {0} szabályzat letiltása sikerült",
+ "classicPolicyDisableSuccessTitle": "Klasszikus szabályzat letiltva",
+ "classicPolicyEasSupportedPlatforms": "Az Exchange ActiveSync által támogatott platformok",
+ "classicPolicyEasUnsupportedPlatforms": "Az Exchange ActiveSync által nem támogatott platformok",
+ "classicPolicyExcludedPlatformsTitle": "Kizárt eszközplatformok",
+ "classicPolicyFilterAll": "Minden szabályzat",
+ "classicPolicyFilterDisabled": "Letiltott szabályzatok",
+ "classicPolicyFilterEnabled": "Engedélyezett szabályzatok",
+ "classicPolicyIncludeExcludeMembersDescription": "Egyes csoportok kizárásával több fázisban telepítheti át a szabályzatokat.",
+ "classicPolicyIncludeExcludeMembersTitle": "Csoportok belefoglalása vagy kizárása",
+ "classicPolicyIncludedPlatformsTitle": "Befoglalt eszközplatformok",
+ "classicPolicyManualMigrationMessage": "A szabályzatot manuálisan kell áttelepíteni.",
+ "classicPolicyMigrateCommand": "Áttelepítés",
+ "classicPolicyMigrateConfirmation": "Biztosan áttelepíti a(z) {0} szabályzatot? A szabályzatot csak egyszer lehet áttelepíteni.",
+ "classicPolicyMigrateFailDescription": "Nem sikerült áttelepíteni a(z) {0} szabályzatot",
+ "classicPolicyMigrateFailTitle": "Nem sikerült áttelepíteni a klasszikus szabályzatot",
+ "classicPolicyMigrateInProgressDescription": "A(z) {0} szabályzat áttelepítése",
+ "classicPolicyMigrateInProgressTitle": "Klasszikus szabályzat áttelepítése",
+ "classicPolicyMigrateRecommendText": "Ajánlás: Végezzen áttelepítést az új Azure Portal szabályzataira.",
+ "classicPolicyMigrateSuccessTitle": "A klasszikus szabályzat áttelepítése sikerült",
+ "classicPolicyMigratedSuccessDescription": "Ez a klasszikus szabályzat mostantól kezelhető a Szabályzatok pontban.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "A klasszikus szabályzatot {0} új szabályzat formájában telepíti át a rendszer. Az új szabályzatok a Szabályzatok pontban kezelhetők.",
+ "classicPolicyNoEditPermissionMsg": "Nincs engedélye a szabályzat szerkesztéséhez. Csak a globális és a biztonsági rendszergazdák módosíthatja a szabályzatot. További információért kattintson ide.",
+ "classicPolicySaveFailDescription": "Nem sikerült menteni a(z) {0} szabályzatot",
+ "classicPolicySaveFailTitle": "Nem sikerült menteni a klasszikus szabályzatot",
+ "classicPolicySaveInProgressDescription": "A(z) {0} szabályzat mentése",
+ "classicPolicySaveInProgressTitle": "Klasszikus szabályzat mentése",
+ "classicPolicySaveSuccessDescription": "A(z) {0} szabályzat mentése sikerült",
+ "classicPolicySaveSuccessTitle": "Klasszikus szabályzat mentve",
+ "clientAppBladeLegacyInfoBanner": "Az örökölt hitelesítés használata jelenleg nem támogatott",
+ "clientAppBladeLegacyUpsellBanner": "A nem támogatott ügyfélalkalmazások letiltása (Előzetes verzió)",
+ "clientAppBladeTitle": "Ügyfélalkalmazások",
+ "clientAppDescription": "Válassza ki az ügyfélalkalmazásokat, melyekre érvényes lesz a házirend",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Az Exchange ActiveSync jelenleg semmilyen más feltételt nem támogat",
+ "clientAppLearnMore": "A felhasználói hozzáférés vezérlésével megcélozhat olyan ügyfélalkalmazásokat, amelyek nem használnak modern hitelesítést.",
+ "clientAppLegacyHeader": "Örökölt hitelesítési ügyfelek",
+ "clientAppMobileDesktop": "Mobilalkalmazások és asztali ügyfelek",
+ "clientAppModernHeader": "Modern hitelesítési ügyfelek",
+ "clientAppOnlySupportedPlatforms": "Házirend alkalmazása csak a támogatott platformokra",
+ "clientAppSelectSpecificClientApps": "Ügyfélalkalmazások kijelölése",
+ "clientAppWebBrowser": "Böngésző",
+ "clientAppsSelectedLabel": "{0} belefoglalva",
+ "clientTypeBrowser": "Böngésző",
+ "clientTypeEas": "Exchange ActiveSync-ügyfelek",
+ "clientTypeEasInfo": "Csak örökölt hitelesítést használó Exchange ActiveSync-kliensek.",
+ "clientTypeModernAuth": "Modern hitelesítési ügyfelek",
+ "clientTypeOtherClients": "Egyéb ügyfelek",
+ "clientTypeOtherClientsInfo": "Ez vonatkozik a régebbi Office-kliensekre és egyéb e-mail-protokollokra (POP, IMAP, SMTP stb.). [További információ][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "A szabályzatban konfigurált {0} felhőalkalmazás törlődött a könyvtárból, de ez a szabályzat más alkalmazásait nem érinti. A szabályzat alkalmazás szakaszának legközelebbi frissítésekor a törölt alkalmazások automatikusan el lesznek távolítva.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Az összes Microsoft-alkalmazás",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "A Microsoft felhőalapú, asztali és mobilalkalmazásainak engedélyezése (Előzetes verzió)",
+ "cloudappsSelectionBladeAllCloudapps": "Minden felhőalkalmazás",
+ "cloudappsSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő felhőalkalmazásokat",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Kizárt felhőalkalmazások kiválasztása",
+ "cloudappsSelectionBladeIncludeDescription": "Válassza ki a felhőalkalmazásokat, melyekre érvényes lesz a házirend",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Kijelölés",
+ "cloudappsSelectionBladeSelectedCloudapps": "Alkalmazások kiválasztása",
+ "cloudappsSelectorInfoBallonText": "Azok a szolgáltatások, amelyekhez a felhasználó munkavégzés céljából hozzáfér. Példa: Salesforce",
+ "cloudappsSelectorPluralExcluded": "{0} alkalmazás kihagyva",
+ "cloudappsSelectorPluralIncluded": "{0} alkalmazás belefoglalva",
+ "cloudappsSelectorSingularExcluded": "1 alkalmazás kihagyva",
+ "cloudappsSelectorSingularIncluded": "1 alkalmazás belefoglalva",
+ "cloudappsSelectorUserPlural": "{0} alkalmazás",
+ "cloudappsSelectorUserSingular": "1 alkalmazás",
+ "conditionLabelMulti": "{0} kijelölt feltétel",
+ "conditionLabelOne": "1 kijelölt feltétel",
+ "conditionalAccessBladeTitle": "Feltételes hozzáférés",
+ "conditionsNotSelectedLabel": "Nincs konfigurálva",
+ "conditionsReqMfaReauthSet": "Néhány beállítás nem érhető el, mert jelenleg a „Többtényezős hitelesítés megkövetelése“ engedély és a „Bejelentkezési gyakoriság minden alkalommal“ munkamenet-vezérlő van kiválasztva",
+ "conditionsReqPwSet": "Néhány lehetőség nem érhető el, mert jelenleg a Jelszómódosítás megkövetelése engedély van kiválasztva",
+ "configureCasText": "Cloud App Security konfigurálása",
+ "configureCustomControlsText": "Egyéni szabályzat konfigurálása",
+ "controlLabelMulti": "{0} kijelölt vezérlő",
+ "controlLabelOne": "1 kijelölt vezérlő",
+ "controlValidatorText": "Jelöljön ki legalább egy vezérlőt",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "További információ a megfelelő eszközök megköveteléséről.",
+ "controlsDeviceComplianceInfoBubble": "Az eszköznek Intune-kompatibilisnek kell lennie. Ha az eszköz nem megfelelő, a rendszer kérni fogja a felhasználót, hogy tegye megfelelővé az eszközt.",
+ "controlsDomainJoinedAriaLabel": "További információ a Microsoft Entrához csatlakoztatott hibrid eszközök megköveteléséről.",
+ "controlsDomainJoinedInfoBubble": "Az eszközöknek hibrid Microsoft Entrához kell csatlakozniuk.",
+ "controlsMamAriaLabel": "További információ a jóváhagyott ügyfélalkalmazások megköveteléséről.",
+ "controlsMamInfoBubble": "Az eszköznek a következő jóváhagyott ügyfélalkalmazásokat kell használnia.",
+ "controlsMfaInfoBubble": "A felhasználónak további biztonság követelményeket kell teljesítenie, például telefonhívás, szöveg",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "További információ a szabályzattal védett alkalmazások megköveteléséről.",
+ "controlsRequireCompliantAppInfoBubble": "Az eszköznek szabályzat által védett alkalmazásokat kell használnia.",
+ "controlsRequirePasswordResetAriaLabel": "További információ a jelszómódosítás megköveteléséről.",
+ "controlsRequirePasswordResetInfoBubble": "Jelszómódosítás megkövetelése a felhasználói kockázat csökkentése érdekében. Ehhez a beállításhoz többtényezős hitelesítés is szükséges. Más vezérlők nem használhatók.",
+ "countriesRadiobuttonInfoBalloonContent": "A felhasználó IP-címe határozza meg, hogy az adott bejelentkezés mely országból/régióból történik.",
+ "createNewVpnCert": "Új tanúsítvány",
+ "createdTimeLabel": "Létrehozás időpontja",
+ "customRoleLabel": "Egyéni szerepkörök (nem támogatott)",
+ "dateRangeTypeLabel": "Dátumtartomány",
+ "daysOfWeekPlaceholderText": "Szűrés a hét napjai szerint",
+ "daysOfWeekTypeLabel": "A hét napjai",
+ "deletePolicyNoLicenseText": "Most már törölheti ezt a szabályzatot. A törlés után már nem fogja tudni újból létrehozni, amíg nem rendelkezik a szükséges licencekkel.",
+ "descriptionContentForControlsAndOr": "Több vezérlő esetén",
+ "devicePlatform": "Eszközplatform",
+ "devicePlatformConditionHelpDescription": "Szabályzat alkalmazása a kiválasztott eszközplatformokra.\n[További információ][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} belefoglalva",
+ "devicePlatformIncludeExclude": "{0} és {1} kizárva",
+ "devicePlatformNoSelectionError": "Egyes eszközplatformok esetén ki kell választani egy alárendelt elemet.",
+ "devicePlatformsNone": "Egyik sem",
+ "deviceSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő platformokat",
+ "deviceSelectionBladeIncludeDescription": "Válassza ki a házirend hatálya alá tartozó eszközplatformokat",
+ "deviceStateAll": "Az összes eszköz állapota",
+ "deviceStateCompliant": "Eszköz megjelölve megfelelőként",
+ "deviceStateCompliantInfoContent": "Az Intune-kompatibilis eszközök kimaradnak a szabályzat kiértékeléséből, így például ha a szabályzat letiltja a hozzáférést, akkor az összes eszközt le fogja tiltani, kivéve azokat, amelyek Intune-kompatibilisek.",
+ "deviceStateConditionConfigureInfoContent": "Szabályzat konfigurálása eszközállapot alapján",
+ "deviceStateConditionSelectorInfoContent": "Annak meghatározása, hogy az eszköz, amelyről a felhasználó bejelentkezik, hibrid Microsoft Entrához csatlakozó, vagy pedig megfelelőként megjelölt.\n Ez elavult, helyette használja a következőt: {1}.",
+ "deviceStateConditionSelectorLabel": "Eszköz állapota (elavult)",
+ "deviceStateDomainJoined": "Az eszköz a hibrid Microsoft Entrához csatlakoztatva",
+ "deviceStateDomainJoinedInfoContent": "A hibrid Microsoft Entrához csatlakozó eszközök kimaradnak a szabályzat kiértékeléséből, így ha például a szabályzat letiltja a hozzáférést, akkor az összes eszközt le fogja tiltani, kivéve azokat, amelyek a hibrid Microsoft Entrához vannak csatlakoztatva.",
+ "deviceStateDomainJoinedInfoLinkText": "További információ.",
+ "deviceStateExcludeDescription": "Válassza ki az eszközök szabályzatból való kizárásához használt eszközállapot-feltételt.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0}, a következő kizárásával: {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0}, a következők kizárásával: {1}, {2}",
+ "directoryRoleInfoContent": "Szabályzat hozzárendelése a beépített címtárszerepkörökhöz.",
+ "directoryRolesLabel": "Címtári szerepkörök",
+ "discardbutton": "Elvetés",
+ "downloadDefaultFileName": "IP-címtartományok",
+ "downloadExampleFileName": "Példa",
+ "downloadExampleHeader": "Ez egy példafájl, amely bemutatja, hogy milyen fajta adatok használhatók érvényesen. A # karakterrel kezdődő sorokat figyelmen kívül hagyja a rendszer.",
+ "duplicate": "Duplikálás",
+ "duplicatePolicyName": "{0} MÁSOLÁSA",
+ "endDatePickerLabel": "Vége",
+ "endTimePickerLabel": "Befejezés időpontja",
+ "enterCountryText": "A rendszer párban értékeli ki az IP-címet és az országot/régiót. Válassza ki az országot.",
+ "enterIpText": "A rendszer párban értékeli ki az IP-címet és az országot/régiót. Adja meg az IP-címet.",
+ "enterUserText": "Nincs megadva felhasználó. Adjon meg egy felhasználót.",
+ "evaluationResult": "Értékelés eredménye",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync csak a támogatott platformokkal",
+ "excludeAllTrustedLocationSelectorText": "minden megbízható hely",
+ "featureRequiresP2": "Ehhez a funkcióhoz Microsoft Entra ID P2-licenc szükséges.",
+ "friday": "péntek",
+ "grantControls": "Engedélyezési vezérlők",
+ "gridNetworkTrusted": "Megbízható",
+ "gridPolicyCreatedDateTime": "Létrehozás dátuma",
+ "gridPolicyEnabled": "Engedélyezve",
+ "gridPolicyModifiedDateTime": "Módosítás dátuma",
+ "gridPolicyName": "Házirend neve",
+ "gridPolicyState": "Állapot",
+ "groupSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő csoportokat",
+ "groupSelectionBladeExcludedSelectorTitle": "Kizárt csoportok kiválasztása",
+ "groupSelectionBladeSelect": "Csoportok kiválasztása",
+ "groupSelectorInfoBallonText": "A szabályzat hatálya alá tartozó csoportok a címtárban. Példa: Próbacsoport",
+ "groupsSelectionBladeTitle": "Csoportok",
+ "helpCommonScenariosText": "Szeretné megismerni a leggyakoribb alkalmazási helyzeteket?",
+ "helpCondition1": "Ha bármely felhasználó a vállalati hálózaton kívüli helyről csatlakozik",
+ "helpCondition2": "Ha a Vezetők csoport felhasználói bejelentkeznek",
+ "helpConditionsTitle": "Feltételek",
+ "helpControl1": "Többtényezős hitelesítéssel kell bejelentkezniük",
+ "helpControl2": "Intune-kompatibilis vagy tartományhoz csatlakoztatott eszközt kell használniuk",
+ "helpControlsTitle": "Szabályzók",
+ "helpIntroText": "A feltételes hozzáférés lehetővé teszi, hogy meghatározott feltételek teljesülése esetén hozzáférési követelményeket léptessen érvénybe. Az alábbi példák ezt szemléltetik",
+ "helpIntroTitle": "Mi a Feltételes hozzáférés?",
+ "helpLearnMoreText": "További tudnivalók a Feltételes hozzáférésről",
+ "helpStartStep1": "Hozza létre első szabályzatát a + Új szabályzat elemre kattintva",
+ "helpStartStep2": "Adja meg a szabályzat feltételeit és szabályzóit",
+ "helpStartStep3": "Ha elkészült, ne felejtse el kiválasztani a Szabályzat engedélyezése és a Létrehozás lehetőséget",
+ "helpStartTitle": "Első lépések",
+ "highRisk": "Nagy",
+ "includeAndExcludeAppsTextFormat": "Belefoglalás: {0}. Kizárás: {1}.",
+ "includeAppsTextFormat": "Belefoglalás: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Az ismeretlen területek olyan IP-címek, melyeket nem lehet országhoz/régióhoz hozzárendelni.",
+ "includeUnknownAreasCheckboxLabel": "Ismeretlen területek belefoglalása",
+ "infoCommandLabel": "Információ",
+ "invalidCertDuration": "A tanúsítvány érvényességi ideje érvénytelen",
+ "invalidIpAddress": "Az értéknek érvényes IP-címnek kell lennie",
+ "invalidReAuthSignInRiskOptionSelected": "Ha a „Bejelentkezés gyakorisága” munkamenet-vezérlő „Minden alkalommal” értékű, a „Nincs kockázat” beállítás nem választható ki a „Bejelentkezési kockázat” feltételvezérlőben.",
+ "invalidUriErrorMsg": "Érvényes URI azonosítót adjon meg. Példa: uri:contoso.com:acr ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Az összes betöltése",
+ "loading": "Betöltés…",
+ "locationConfigureNamedLocationsText": "Minden megbízható hely konfigurálása",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "A hely neve túl hosszú, legfeljebb 256 karakter lehet",
+ "locationSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő helyeket",
+ "locationSelectionBladeIncludeDescription": "Válassza ki a házirend hatálya alá tartozó helyeket",
+ "locationsAllLocationsLabel": "Bármely hely",
+ "locationsAllNamedLocationsLabel": "Minden megbízható IP-cím",
+ "locationsAllPrivateLinksLabel": "A bérlő összes privát kapcsolata",
+ "locationsIncludeExcludeLabel": "{0} és minden megbízható IP-cím kizárása",
+ "locationsSelectedPrivateLinksLabel": "Kiválasztott privát kapcsolatok",
+ "lowRisk": "Kicsi",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "A feltételes hozzáférési szabályzatok kezeléséhez a szervezetnek P1 vagy P2 szintű Microsoft Entrára van szüksége.",
+ "manageSecurityDefaultsAriaLabel": "Javasolt biztonsági beállítások kezelése.",
+ "markAsTrustedCheckboxInfoBalloonContent": "A megbízható helyről való bejelentkezés csökkenti az adott felhasználó bejelentkezési kockázatát. A helyet csak akkor jelölje meg megbízhatóként, ha tudja, hogy a megadott IP-címtartományok használata megalapozott és hihető a szervezetben.",
+ "markAsTrustedCheckboxLabel": "Megjelölés megbízható helyként",
+ "mediumRisk": "Közepes",
+ "memberSelectionCommandRemove": "Eltávolítás",
+ "menuItemClaimProviderControls": "Egyéni vezérlők (Előzetes verzió)",
+ "menuItemClassicPolicies": "Klasszikus szabályzatok",
+ "menuItemInsightsAndReporting": "Betekintések és jelentéskészítés",
+ "menuItemManage": "Kezelés",
+ "menuItemNamedLocationsPreview": "Nevesített helyek (előzetes verzió)",
+ "menuItemNamedNetworks": "Nevesített helyek",
+ "menuItemPolicies": "Házirendek",
+ "menuItemTermsOfUse": "Használati feltételek",
+ "modifiedTimeLabel": "Módosítás ideje",
+ "monday": "hétfő",
+ "nameLabel": "Név",
+ "namedLocationCountryInfoBanner": "Csak az IPv4-címek vannak leképezve országokra/régiókra. Az IPv6-címek az ismeretlen országok/régiók között szerepelnek.",
+ "namedLocationTypeCountry": "Országok/régiók",
+ "namedLocationTypeLabel": "Hely megadása az alábbi használatával:",
+ "namedLocationUpsellBanner": "Ez a nézet elavult. Váltson az új és továbbfejlesztett Nevesített helyek nézetre.",
+ "namedLocationsHelpDescription": "A Microsoft Entra ID biztonsági jelentései nevesített helyeket használnak az álpozitív találatok és a Microsoft Entra feltételes hozzáférési szabályzatai számának csökkentésére.\n[További információ][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Új IP-címtartomány hozzáadása (példa: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "Legalább egy országot/régiót ki kell választania",
+ "namedNetworkDeleteCommand": "Törlés",
+ "namedNetworkDeleteDescription": "Biztos, hogy törli a(z) {0} hálózatot? Ez a művelet nem vonható vissza.",
+ "namedNetworkDeleteTitle": "Biztos benne?",
+ "namedNetworkDownloadIpRange": "Letöltés",
+ "namedNetworkInvalidRange": "Az értéknek érvényes IP-címtartománynak kell lennie.",
+ "namedNetworkIpRangeNeeded": "Legalább egy érvényes IP-címtartomány szükséges",
+ "namedNetworkIpRangesDescriptionContent": "A szervezet IP-címtartományainak konfigurálása",
+ "namedNetworkIpRangesTab": "IP-címtartományok",
+ "namedNetworkListAdd": "Új hely",
+ "namedNetworkListConfigureTrustedIps": "Többtényezős hitelesítés megbízható IP-címeinek konfigurálása",
+ "namedNetworkNameDescription": "Példa: Budapesti iroda",
+ "namedNetworkNameInvalid": "A megadott név érvénytelen.",
+ "namedNetworkNameRequired": "A hely nevét kötelező megadni.",
+ "namedNetworkNoIpRanges": "Nincsenek IP-címtartományok",
+ "namedNetworkNotificationCreateDescription": "A(z) {0} nevű hely létrehozása",
+ "namedNetworkNotificationCreateFailedDescription": "Nem sikerült létrehozni a(z) {0} nevű helyet. Később próbálkozzon újra.",
+ "namedNetworkNotificationCreateFailedTitle": "Nem sikerült létrehozni a helyet",
+ "namedNetworkNotificationCreateSuccessDescription": "A(z) {0} nevű hely létrehozva",
+ "namedNetworkNotificationCreateSuccessTitle": "Hálózat ({0}) létrehozva",
+ "namedNetworkNotificationCreateTitle": "Hálózat ({0}) létrehozása",
+ "namedNetworkNotificationDeleteDescription": "A(z) {0} nevű hely törlése",
+ "namedNetworkNotificationDeleteFailedDescription": "Nem sikerült törölni a(z) {0} nevű helyet. Később próbálkozzon újra.",
+ "namedNetworkNotificationDeleteFailedTitle": "Nem sikerült törölni a helyet",
+ "namedNetworkNotificationDeleteSuccessDescription": "A(z) {0} nevű hely törölve",
+ "namedNetworkNotificationDeleteSuccessTitle": "A(z) {0} hálózat törölve",
+ "namedNetworkNotificationDeleteTitle": "A(z) {0} törlése",
+ "namedNetworkNotificationUpdateDescription": "A(z) {0} nevű hely frissítése",
+ "namedNetworkNotificationUpdateFailedDescription": "Nem sikerült frissíteni a(z) {0} nevű helyet. Később próbálkozzon újra.",
+ "namedNetworkNotificationUpdateFailedTitle": "Nem sikerült frissíteni a helyet",
+ "namedNetworkNotificationUpdateSuccessDescription": "A(z) {0} nevű hely frissítve",
+ "namedNetworkNotificationUpdateSuccessTitle": "A(z) {0} hálózat frissítve",
+ "namedNetworkNotificationUpdateTitle": "A(z) {0} hálózat frissítése",
+ "namedNetworkSearchPlaceholder": "Helyek keresése.",
+ "namedNetworkUploadFailedDescription": "Hiba történt a feltöltött fájl elemzése közben. Ügyeljen arra, hogy olyan egyszerű szöveges fájlt töltsön fel, amelynek minden sora CIDR formátumú.",
+ "namedNetworkUploadFailedTitle": "Nem sikerült elemezni a(z) „{0}” fájlt.",
+ "namedNetworkUploadInProgressDescription": "Folyamatban van a(z) {0} fájl érvényes CIDR-értékeinek elemzése.",
+ "namedNetworkUploadInProgressTitle": "Elemzés – {0}",
+ "namedNetworkUploadInvalidDescription": "A(z) {0} túl nagy méretű, vagy érvénytelen a formátuma.",
+ "namedNetworkUploadInvalidTitle": "{0} – érvénytelen",
+ "namedNetworkUploadIpRange": "Feltöltés",
+ "namedNetworkUploadSuccessDescription": "{0} sor elemezve, amelyből {1} helytelen formátumú, {2} pedig kihagyva.",
+ "namedNetworkUploadSuccessTitle": "Elemzés befejezve – {0}",
+ "namedNetworksAdd": "Új nevesített hely",
+ "namedNetworksConditionHelpDescription": "Felhasználói hozzáférés szabályozása a fizikai hely alapján.\n[További információ][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} és {1} kizárva",
+ "namedNetworksHelpDescription": "A Microsoft Entra ID biztonsági jelentései nevesített helyeket használnak az álpozitív találatok és a Microsoft Entra feltételes hozzáférési szabályzatai számának csökkentésére.\n[További információ][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} belefoglalva",
+ "namedNetworksNone": "Nem találhatók nevesített helyek.",
+ "namedNetworksTitle": "Helyek konfigurálása",
+ "namednetworkExceedingSizeErrorBladeTitle": "Hibaüzenet részletei",
+ "namednetworkExceedingSizeErrorDetailText": "További részletekért kattintson ide.",
+ "namednetworkExceedingSizeErrorMessage": "Túllépte a nevesített helyek esetében maximálisan engedélyezett tárhelyet. Próbálkozzon újra egy rövidebb listával. További részletek megtekintéséhez kattintson ide.",
+ "needMfaSecondary": "A „Többtényezős hitelesítés megkövetelése“ beállítást akkor kell kiválasztani, ha a „Bejelentkezési gyakoriság minden alkalommal“ lehetőséget a „Csak másodlagos hitelesítési módszerek“ opcióval együtt választja ki.",
+ "needMfaSpecificApps": "A „Bejelentkezés gyakorisága minden alkalommal” munkamenet-vezérlő a „Többtényezős hitelesítés megkövetelése” engedélyezési vezérlő használatát igényli, ha kifejezetten támogatott alkalmazások lettek kiválasztva.",
+ "newCertName": "új tanúsítvány",
+ "noAttributePermissionsError": "Nincs megfelelő jogosultsága a szabályzat létrehozásához vagy frissítéséhez. Dinamikus szűrők hozzáadásához vagy szerkesztéséhez attribútumdefiníció-olvasói szerepkör szükséges.",
+ "noPolicyRowMessage": "Nem találhatók házirendek",
+ "noSPSelected": "Nincs kiválasztva szolgáltatásnév",
+ "noUpdatePermissionMessage": "Nincs jogosultsága a beállítások frissítéséhez. Kérjen hozzáférést a globális rendszergazdától.",
+ "noUserSelected": "Nincs kijelölve felhasználó",
+ "noneRisk": "Nincs kockázat",
+ "office365Description": "Ezen alkalmazások közé tartozik egyebek mellett a Microsoft Flow, a Microsoft Forms, a Microsoft Teams, az Office 365 Exchange Online, az Office 365 SharePoint Online és az Office 365 Yammer.",
+ "office365InfoBox": "A kiválasztott alkalmazások közül legalább egy az Office 365 része. Ajánlott inkább az Office 365-alkalmazásra vonatkozó szabályzatot beállítani.",
+ "oneUserSelected": "1 felhasználó van kiválasztva",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Csak a globális rendszergazdák menthetik ezt a szabályzatot.",
+ "or": "{0} VAGY {1} ",
+ "pickerDoneCommand": "Kész",
+ "policiesBladeAdPremiumUpsellBannerText": "Hozzon létre saját szabályzatokat, és olyan konkrét feltételeket célozzon meg velük, mint például a felhőbeli alkalmazások, a bejelentkezési kockázat vagy a prémium szintű Microsoft Entra ID-t használó eszközplatformok.",
+ "policiesBladeTitle": "Házirendek",
+ "policiesBladeTitleWithAppName": "Szabályzatok: {0}",
+ "policiesDisabledBannerText": "A szabályzatok létrehozása és szerkesztése tiltott a csatolt bejelentkezési attribútummal rendelkező alkalmazások esetében.",
+ "policiesHitMaxLimitStatusBarMessage": "Elérte a bérlőhöz tartozó szabályzatok maximális számát. Mielőtt további szabályzatokat hozna létre, töröljön néhányat.",
+ "policyAssignmentsSection": "Hozzárendelések",
+ "policyBlockAllInfoBox": "A konfigurált szabályzat letiltja az összes felhasználót, ezért nem támogatott. Tekintse át a hozzárendeléseket és a vezérlőket. Ha szeretné menteni a szabályzatot, zárja ki az aktuális felhasználót ({0}).",
+ "policyCloudAppsDisplayTextAllApp": "Minden alkalmazás",
+ "policyCloudAppsLabel": "Felhőalkalmazások",
+ "policyConditionClientAppDescription": "A felhasználó által a felhőalkalmazás elérésére használt szoftver. Példa: Böngésző",
+ "policyConditionClientAppV2Description": "A felhasználó által a felhőalkalmazás elérésére használt szoftver. Példa: Böngésző",
+ "policyConditionDevicePlatform": "Eszközplatformok",
+ "policyConditionDevicePlatformDescription": "A platform, amelyről a felhasználó bejelentkezik. Példa: 'iOS'",
+ "policyConditionLocation": "Helyszínek",
+ "policyConditionLocationDescription": "A hely (az IP-címtartomány használatával megállapítva), ahonnan a felhasználó bejelentkezik",
+ "policyConditionLocationPreview": "Helyek (Előzetes verzió)",
+ "policyConditionSigninRisk": "Bejelentkezési kockázat",
+ "policyConditionSigninRiskDescription": "Annak valószínűsége, hogy a bejelentkezés nem a felhasználó részéről történt. A kockázati szint lehet magas, közepes vagy alacsony. A beállításhoz Microsoft Entra ID P2-licenc szükséges.",
+ "policyConditionUserRisk": "Felhasználói kockázat",
+ "policyConditionUserRiskDescription": "A szabályzat érvényesítéséhez szükséges felhasználói kockázati szintek konfigurálása",
+ "policyConditioniClientApp": "Ügyfélalkalmazások",
+ "policyControlAllowAccessDisplayedName": "Hozzáférés biztosítása",
+ "policyControlAuthenticationStrengthDisplayedName": "Hitelesítés erősségének megkövetelése (Előzetes verzió)",
+ "policyControlBladeTitle": "Hozzáférés",
+ "policyControlBlockAccessDisplayedName": "Hozzáférés letiltása",
+ "policyControlCompliantDeviceDisplayedName": "Eszköz megfelelőként való megjelölésének megkövetelése",
+ "policyControlContentDescription": "Hozzáférési engedélyek kényszerítésének vezérlése hozzáférés letiltása vagy engedélyezése érdekében.",
+ "policyControlInfoBallonText": "A hozzáférés letiltása vagy a megadásához teljesítendő további követelmények kijelölése",
+ "policyControlMfaChallengeDisplayedName": "Többtényezős hitelesítés megkövetelése",
+ "policyControlRequireCompliantAppDisplayedName": "Alkalmazásvédelmi szabályzat megkövetelése",
+ "policyControlRequireDomainJoinedDisplayedName": "A hibrid Microsoft Entrához csatlakoztatott eszköz megkövetelése",
+ "policyControlRequireMamDisplayedName": "Jóváhagyott ügyfélalkalmazás megkövetelése",
+ "policyControlRequiredPasswordChangeDisplayedName": "Jelszómódosítás megkövetelése",
+ "policyControlSelectAuthStrength": "Hitelesítés erősségének megkövetelése",
+ "policyControlsNoControlsSelected": "0 kijelölt vezérlő",
+ "policyControlsSection": "Hozzáférés-szabályozás",
+ "policyCreatBladeTitle": "Új",
+ "policyCreateButton": "Létrehozás",
+ "policyCreateFailedMessage": "Hiba: {0}",
+ "policyCreateFailedTitle": "Nem sikerült létrehozni a(z) {0} szabályzatot",
+ "policyCreateInProgressTitle": "Hálózat ({0}) létrehozása",
+ "policyCreateSuccessMessage": "A(z) {0} létrehozása sikerült. A szabályzat néhány perc múlva érvénybe lép, amennyiben a Házirend engedélyezése beállítás Bekapcsolva értékre van állítva.",
+ "policyCreateSuccessTitle": "A(z) {0} szabályzat létrehozása sikerült",
+ "policyDeleteConfirmation": "Biztos, hogy törli a(z) {0} hálózatot? Ez a művelet nem vonható vissza.",
+ "policyDeleteFailTitle": "Nem sikerült törölni a(z) {0} bérlői védjegyezést",
+ "policyDeleteInProgressTitle": "A(z) {0} törlése",
+ "policyDeleteSuccessTitle": "A(z) {0} törlése sikerült",
+ "policyEnforceLabel": "Házirend engedélyezése",
+ "policyErrorCannotSetSigninRisk": "Nincs engedélye menteni a szabályzatot bejelentkezési kockázati feltétellel.",
+ "policyErrorNoPermission": "Nem jogosult a szabályzat mentésére. Forduljon a globális rendszergazdához.",
+ "policyErrorUnknown": "Hiba történt. Próbálkozzon újra később.",
+ "policyFallbackWarningMessage": "Nem sikerült létrehozni vagy frissíteni a(z) {0} szabályzatot az MS Graph használatával, ami miatt a rendszer a helyettes alkalmazásra, az AD Graph-ra váltott. Kérjük, vizsgálja meg a következő forgatókönyvet, mert valószínűleg hiba történt az MS Graph nem kompatibilis állapottal rendelkező szabályzatvégpontjának meghívásakor.",
+ "policyFallbackWarningTitle": "A(z) {0} létrehozása vagy frissítése részben sikeres volt",
+ "policyNameCannotBeEmpty": "A szabályzat neve nem lehet üres",
+ "policyNameDevice": "Eszközszabályzat",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Mobilalkalmazás-kezelési szabályzat",
+ "policyNameMfaLocation": "Többtényezős hitelesítésre és helymeghatározásra vonatkozó szabályzat",
+ "policyNamePlaceholderText": "Példa: Eszközmegfelelőségi alkalmazásszabályzat",
+ "policyNameTooLongError": "A szabályzat neve túl hosszú, legfeljebb 256 karakter lehet",
+ "policyOff": "Kikapcsolva",
+ "policyOn": "Bekapcsolva",
+ "policyReportOnly": "Csak jelentés",
+ "policyReviewSection": "Áttekintés",
+ "policySaveButton": "Mentés",
+ "policyStatusIconDescription": "A szabályzat engedélyezve van",
+ "policyStatusIconEnabled": "Engedélyezett állapot ikonja",
+ "policyTemplateName1": "Alkalmazás által kényszerített korlátozások alkalmazása a(z) {0} alkalmazáshoz való böngészőalapú hozzáférésre",
+ "policyTemplateName2": "A(z) {0} hozzáférésének engedélyezése csak kezelt eszközökön",
+ "policyTemplateName3": "A folyamatos hozzáférés-kiértékelési beállításokból átmigrált szabályzat",
+ "policyTriggerRiskSpecific": "Adott kockázati szint kijelölése",
+ "policyTriggersInfoBalloonText": "Azon feltételek, amelyek teljesülésekor érvénybe lép a szabályzat. Példa: 'hely'",
+ "policyTriggersNoConditionsSelected": "0 kijelölt feltétel",
+ "policyTriggersSelectorLabel": "Feltételek",
+ "policyUpdateFailedMessage": "Hiba: {0}",
+ "policyUpdateFailedTitle": "Nem sikerült frissíteni a(z) {0} alkalmazást",
+ "policyUpdateInProgressTitle": "{0} frissítése",
+ "policyUpdateSuccessMessage": "A(z) {0} frissítése megtörtént. A szabályzat néhány perc múlva érvénybe lép, amennyiben a Házirend engedélyezése beállítás Bekapcsolva értékre van állítva.",
+ "policyUpdateSuccessTitle": "A(z) {0} alkalmazás frissítése sikeresen megtörtént",
+ "primaryCol": "Elsődleges",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "Csak jelentés üzemmód: a rendszer bejelentkezéskor kiértékeli és naplózza a szabályzatokat, de ez nincs hatással a felhasználókra.",
+ "requireAllControlsText": "Az összes kijelölt vezérlő megkövetelése",
+ "requireCompliantDevice": "Megfelelő eszköz megkövetelése",
+ "requireDomainJoined": "Tartományhoz csatlakoztatott eszköz megkövetelése",
+ "requireGrantReauth": "A „bejelentkezési gyakoriság minden alkalommal“ munkamenet-vezérlő megköveteli a „többtényezős hitelesítés megkövetelése“ vagy a „jelszómódosítás megkövetelése“ engedélyezési vezérlőt, ha a „Minden felhőalkalmazás“ beállítás van kiválasztva",
+ "requireMFA": "Többtényezős hitelesítés megkövetelése",
+ "requireMfaReauth": "A „bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „többtényezős hitelesítés megkövetelése” engedélyezési vezérlőt a „bejelentkezési kockázat” esetében",
+ "requireOneControlText": "Az egyik kijelölt vezérlő megkövetelése",
+ "requirePasswordChangeReauth": "A „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „Jelszómódosítás megkövetelése” engedélyezési vezérlőt a „felhasználói kockázat” esetében",
+ "requireRiskReauth": "A „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „Felhasználói kockázat” vagy a „Bejelentkezési kockázat” munkamenet-vezérlőt, ha az „Összes felhőalkalmazás” beállítás van kiválasztva.",
+ "requireRiskReauthRiskNotEnabled": "A „Bejelentkezés gyakorisága minden alkalommal” munkamenet-vezérlő nem érhető el, ha a „Minden felhőalkalmazás” beállítás van kiválasztva.",
+ "requireRiskReauthSignInOnly": "A „Bejelentkezés gyakorisága minden alkalommal” munkamenet-vezérlő megköveteli a „Bejelentkezési kockázat” munkamenet-vezérlő meglétét, ha a „Minden felhőalkalmazás” beállítás van kiválasztva.",
+ "requireRiskReauthUserOnly": "A „Bejelentkezés gyakorisága minden alkalommal” munkamenet-vezérlő megköveteli a „Felhasználói kockázat” munkamenet-vezérlő meglétét, ha a „Minden felhőalkalmazás” beállítás van kiválasztva.",
+ "resetFilters": "Szűrők alaphelyzetbe állítása",
+ "sPRequired": "A szolgáltatásnév megadása kötelező",
+ "sPSelectorInfoBalloon": "A tesztelni kívánt felhasználó vagy szolgáltatásnév",
+ "saturday": "szombat",
+ "searchTextTooLongError": "A keresett szöveg túl hosszú. Legfeljebb 256 karaktert tartalmazhat.",
+ "securityDefaultsPolicyName": "Javasolt biztonsági beállítások",
+ "securityDefaultsTextMessage": "A javasolt biztonsági beállításokat le kell tiltani egy feltételes hozzáférési szabályzat engedélyezéséhez.",
+ "securityDefaultsUpdateInProgressText": "A javasolt biztonsági beállítások frissítése folyamatban van, várjon egy kicsit, és próbálkozzon újra.",
+ "securityDefaultsWarningMessage": "Úgy tűnik, hogy a cég biztonsági konfigurációit szeretné kezelni. Ez nagyszerű! A feltételes hozzáférési szabályzat engedélyezéséhez először {0}le kell tiltania a javasolt biztonsági beállításokat{1}.",
+ "selectDevicePlatforms": "Eszközplatformok kiválasztása",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Helyek kiválasztása",
+ "selectedSP": "Kiválasztott szolgáltatásnév",
+ "servicePrincipalBladeExcludedSelectorTitle": "Kizárt alkalmazáspéldányok kiválasztása",
+ "servicePrincipalBladeIncludedSelectorTitle": "Alkalmazáspéldányok kiválasztása",
+ "servicePrincipalDataGridAria": "Elérhető szolgáltatásnevek listája",
+ "servicePrincipalDropDownLabel": "Mire vonatkozik ez a szabályzat?",
+ "servicePrincipalInfoBox": "Bizonyos feltételek a szabályzat-hozzárendelésben megadott {0} választás miatt nem érhetők el",
+ "servicePrincipalRadioAll": "Az összes saját tulajdonú szolgáltatásnév",
+ "servicePrincipalRadioSelect": "Szolgáltatásnév választása",
+ "servicePrincipalSelectionsAria": "Kijelölt szolgáltatásnevek táblázata",
+ "servicePrincipalSelectorAria": "Választott szolgáltatásnevek listája",
+ "servicePrincipalSelectorMultiple": "{0} szolgáltatásnév kijelölve",
+ "servicePrincipalSelectorSingle": "1 szolgáltatásnév kijelölve",
+ "servicePrincipalSpecificExc": "Megadott szolgáltatásnevek kizárva",
+ "servicePrincipalSpecificInc": "Megadott szolgáltatásnevekre érvényes",
+ "servicePrincipals": "Szolgáltatásnevek",
+ "sessionControlBladeTitle": "Munkamenet",
+ "sessionControlDescriptionContent": "A hozzáférések munkamenet-vezérlő alapú szabályozásával korlátozott felületeket tehet elérhetővé adott felhőalkalmazásokban.",
+ "sessionControlDisableInfo": "Ez a vezérlő csak a támogatott alkalmazásokkal működik együtt. A felhőalapú alkalmazások közül jelenleg csak az Office 365, az Exchange Online és a SharePoint Online támogatja az alkalmazás által kikényszerített korlátozásokat. További információért kattintson ide.",
+ "sessionControlInfoBallonText": "A munkamenet-vezérlők a funkciók korlátozását teszik lehetővé a felhőalkalmazásokban.",
+ "sessionControls": "Munkamenet-vezérlők",
+ "sessionControlsAppEnforcedLabel": "Alkalmazás által kényszerített korlátozások használata",
+ "sessionControlsCasLabel": "Feltételes hozzáférést biztosító alkalmazás-vezérlő használata",
+ "sessionControlsSecureSignInLabel": "Jogkivonatkötés megkövetelése",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} belefoglalva",
+ "signinRiskReauth": "A „Bejelentkezési kockázat“ feltételt akkor kell kiválasztani, ha a „Többtényezős hitelesítés megkövetelése“ engedély és a „Bejelentkezési gyakoriság minden alkalommal“ munkamenet-vezérlő van kiválasztva.",
+ "signinRiskTriggerDescriptionContent": "A bejelentkezési kockázat szintjének kiválasztása",
+ "singleTenantServicePrincipalInfoBallonText": "A szabályzat csak a szervezet tulajdonában álló egybérlős szolgáltatásnevekre vonatkozik. További információért kattintson ide ",
+ "specificSigninRiskLevelsOption": "Konkrét bejelentkezési kockázati szintek kiválasztása",
+ "specificUsersExcluded": "a megadott felhasználók kizárásával",
+ "specificUsersIncluded": "A megadott felhasználók belefoglalásával",
+ "specificUsersIncludedAndExcluded": "Kizárt és befoglalt felhasználók",
+ "startDatePickerLabel": "Kezdés",
+ "startFreeTrial": "Ingyenes próba megkezdése",
+ "startTimePickerLabel": "Kezdő időpont",
+ "sunday": "vasárnap",
+ "testButton": "What If",
+ "thumbprintCol": "Ujjlenyomat",
+ "thursday": "csütörtök",
+ "timeConditionAllTimesLabel": "Bármikor",
+ "timeConditionIntroText": "Állítsa be az időpontokat, amelyre érvényes lesz a szabályzat",
+ "timeConditionSelectorInfoBallonContent": "A felhasználó bejelentkezésének időpontja. Példa: „Szerda 9:00 – 17:00 (PST)”",
+ "timeConditionSelectorLabel": "Időpont (Előzetes verzió)",
+ "timeConditionSpecificLabel": "Megadott időpontok",
+ "timeSelectorAllTimesText": "Bármikor",
+ "timeSelectorSpecificTimesText": "Megadott konfigurált időpontok",
+ "timeZoneDropdownInfoBalloonContent": "Válassza ki az időzónát, amely meghatározza az időtartományt. A szabályzat az összes időzóna felhasználóira érvényes. Például az adott felhasználóra vonatkozó „Szerda 9:00 – 17:00” érték egy másik időzónában lévő felhasználó számára „Szerda 10:00 – 18:00” lehet.",
+ "timeZoneDropdownLabel": "Időzóna",
+ "timeZoneDropdownPlaceholderText": "Válasszon időzónát",
+ "tooManyPoliciesDescription": "Jelenleg csak az első 50 házirend van megjelenítve. Az összes házirend megtekintéséhez kattintson ide",
+ "tooManyPoliciesTitle": "Több mint 50 házirend található",
+ "trustedLocationStatusIconDescription": "A hely megbízható",
+ "trustedLocationStatusIconEnabled": "Megbízható állapotikon",
+ "tuesday": "kedd",
+ "uploadInBadState": "Nem sikerült feltölteni a megadott fájlt.",
+ "upsellAppsDescription": "Többtényezős hitelesítés megkövetelése a bizalmas alkalmazásokhoz minden esetben vagy csak a vállalati hálózaton kívülről.",
+ "upsellAppsTitle": "Alkalmazások védelme",
+ "upsellBannerText": "A szolgáltatás használatához szerezze be az ingyenes Prémium szintű próbaverziót",
+ "upsellDataDescription": "Annak megkövetelése a vállalati erőforrások elérésének engedélyezéséhez, hogy az eszköz megfelelőként megjelölt vagy hibrid Microsoft Entrához csatlakozó legyen.",
+ "upsellDataTitle": "Adatok védelme",
+ "upsellDescription": "A feltételes hozzáférés biztosítja a céges adatok biztonságához szükséges vezérlési és védelmi funkciókat, és olyan környezetet kínál, amely lehetővé teszi a felhasználóknak, hogy minden eszközön a leghatékonyabban dolgozzanak. Lehetőséget nyújt például a vállalati hálózaton kívülről történő hozzáférés korlátozására vagy a hozzáférés azon eszközökre való korlátozására, amelyek megfelelnek a szabályzatok előírásainak.",
+ "upsellRiskDescription": "Többtényezős hitelesítés megkövetelése a Microsoft gépi tanulási rendszere által észlelt kockázati események esetében.",
+ "upsellRiskTitle": "Védelem a kockázatok ellen",
+ "upsellTitle": "Feltételes hozzáférés",
+ "upsellWhyTitle": "Miért érdemes Feltételes hozzáférést használni?",
+ "userAppNoneOption": "Egyik sem",
+ "userNamePlaceholderText": "Írja be a felhasználónevet",
+ "userNotSetSeletorLabel": "0 kijelölt felhasználó és csoport",
+ "userOnlySelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő felhasználókat",
+ "userOrGroupSelectionCountDiffBannerText": "A szabályzatban konfigurált {0} törlődött a könyvtárból, de ez a szabályzat más felhasználóit és csoportjait nem érinti. A szabályzat legközelebbi frissítésekor a törölt felhasználók és/vagy alkalmazások automatikusan el lesznek távolítva.",
+ "userOrSPNotSetSelectorLabel": "Nincs kiválasztva felhasználó vagy számítási feladathoz tartozó identitás",
+ "userOrSPSelectionBladeTitle": "Felhasználók vagy számítási feladatok identitásai",
+ "userOrSPSelectorInfoBallonText": "A szabályzat hatálya alá tartozó címtárbeli identitások, beleértve a felhasználókat, csoportokat és szolgáltatásneveket",
+ "userRequired": "Felhasználó megadása kötelező",
+ "userRiskErrorBox": "A Felhasználói kockázat feltételt kell kiválasztani, ha a Jelszómódosítás megkövetelése engedély van kiválasztva",
+ "userRiskReauth": "A „Felhasználói kockázat” feltételt kell kiválasztani a „Bejelentkezési kockázat” helyett, ha a „Jelszómódosítás megkövetelése” engedély és a „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő van kiválasztva",
+ "userSPRequired": "A felhasználó vagy szolgáltatásnév megadása kötelező",
+ "userSPSelectorTitle": "Felhasználó vagy számítási feladat identitása",
+ "userSelectionBladeAllUsersAndGroups": "Minden felhasználó és csoport",
+ "userSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő felhasználókat és csoportokat",
+ "userSelectionBladeExcludeTabTitle": "Kizárás",
+ "userSelectionBladeExcludedSelectorTitle": "Kizárt felhasználók és csoportok kijelölése",
+ "userSelectionBladeIncludeDescription": "Adja meg azokat a felhasználókat, akikre érvényes lesz a szabályzat",
+ "userSelectionBladeIncludeTabTitle": "Belefoglalás",
+ "userSelectionBladeIncludedSelectorTitle": "Kijelölés",
+ "userSelectionBladeSelectUsers": "Felhasználók kijelölése",
+ "userSelectionBladeSelectedUsers": "Felhasználók és csoportok kijelölése",
+ "userSelectionBladeTitle": "Felhasználók és csoportok",
+ "userSelectorBladeTitle": "Felhasználók",
+ "userSelectorExcluded": "{0} kizárva",
+ "userSelectorGroupPlural": "{0} csoport",
+ "userSelectorGroupSingular": "1 csoport",
+ "userSelectorIncluded": "{0} belefoglalva",
+ "userSelectorInfoBallonText": "A szabályzat hatálya alá tartozó felhasználók és csoportok a címtárban. Példa: 'Próbacsoport'",
+ "userSelectorSelected": "{0} kijelölve",
+ "userSelectorTitle": "Felhasználó",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0}-felhasználók",
+ "userSelectorUserSingular": "1 felhasználó",
+ "userSelectorWithExclusion": "{0} és {1}",
+ "usersGroupsLabel": "Felhasználók és csoportok",
+ "viewApprovedAppsText": "A jóváhagyott ügyfélalkalmazások listájának megtekintése",
+ "viewCompliantAppsText": "A szabályzat által védett ügyfélalkalmazások listájának megtekintése",
+ "viewPolicyInformation": "Házirend adatainak megtekintése",
+ "vpnBladeTitle": "VPN-kapcsolat",
+ "vpnCertCreateFailedMessage": "Hiba: {0}",
+ "vpnCertCreateFailedTitle": "A(z) {0} létrehozása nem sikerült",
+ "vpnCertCreateInProgressTitle": "{0} létrehozása",
+ "vpnCertCreateSuccessMessage": "A(z) {0} tanúsítvány létrehozása sikerült.",
+ "vpnCertCreateSuccessTitle": "A(z) {0} létrehozása sikerült",
+ "vpnCertNoRowsMessage": "Nem találhatók VPN-tanúsítványok",
+ "vpnCertUpdateFailedMessage": "Hiba: {0}",
+ "vpnCertUpdateFailedTitle": "Nem sikerült frissíteni a(z) {0} alkalmazást",
+ "vpnCertUpdateInProgressTitle": "{0} frissítése",
+ "vpnCertUpdateSuccessMessage": "A(z) {0} tanúsítvány frissítése sikerült.",
+ "vpnCertUpdateSuccessTitle": "A(z) {0} alkalmazás frissítése sikeresen megtörtént",
+ "vpnFeatureInfo": "A VPN-kapcsolatokkal és a Feltételes hozzáféréssel kapcsolatos további információért kattintson ide.",
+ "vpnFeatureWarning": "Ha létrehoznak egy VPN-tanúsítványt a portálon, a Microsoft Entra ID azonnal megkezdi a rövid élettartamú tanúsítványok kiadását a VPN-ügyfélnek a tanúsítvány használatával. A VPN-ügyfél hitelesítő adatainak ellenőrzésével kapcsolatos problémák elkerülése érdekében kritikus fontosságú a VPN-tanúsítvány VPN-kiszolgálón való azonnali üzembe helyezése.",
+ "vpnMenuText": "VPN-kapcsolat",
+ "vpncertDropdownDefaultOption": "Időtartam",
+ "vpncertDropdownInfoBalloonContent": "Az érvényességi idő kiválasztása a létrehozni kívánt tanúsítványhoz",
+ "vpncertDropdownLabel": "Érvényességi idő kiválasztása",
+ "vpncertDropdownOneyearOption": "1 év",
+ "vpncertDropdownThreeyearOption": "3 év",
+ "vpncertDropdownTwoyearOption": "2 év",
+ "wednesday": "szerda",
+ "whatIfCountry": "Ország/régió",
+ "whatIfCountryInfo": "Az az ország/régió, amelyből a felhasználó bejelentkezik.",
+ "whatIfDevicePlatformInfo": "Az eszközplatform, melyről a felhasználó bejelentkezik.",
+ "whatIfEnterIpAddress": "Adja meg az IP-címet (példa: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "Érvénytelen IP-cím van megadva.",
+ "whatIfIpAddress": "IP-cím",
+ "whatIfIpAddressInfo": "Az IP-cím, ahonnan a felhasználó bejelentkezik.",
+ "whatIfIpCountryInfoBoxText": "IP-cím vagy ország/régió használata esetén mindkét mezőt ki kell tölteni, és az értéküknek helyesen meg kell felelnie egymásnak.",
+ "whatIfSelectCountry": "Ország/régió kiválasztása...",
+ "whatIfSelectDevicePlatform": "Válasszon eszközplatformot...",
+ "whatIfSelectPrivateLink": "Privát kapcsolat kiválasztása...",
+ "whatIfSelectSignInRisk": "Válasszon bejelentkezési kockázatot...",
+ "whatIfSignInRisk": "Bejelentkezési kockázat",
+ "whatIfSignInRiskInfo": "A bejelentkezéshez társított kockázati szint",
+ "whatIfUnknownAreas": "Ismeretlen területek",
+ "windows365InfoBox": "A Windows 365 kiválasztása hatással lesz a kapcsolatokra a felhőalapú PC-khez és az Azure Virtual Desktop-munkamenetgazdákhoz. További információért kattintson ide.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Számítási feladatok identitásai (előzetes verzió)",
+ "workloadIdentitiesLicenseText": "A szabályzat szerkesztéséhez prémium P1 vagy P2 szintű számításifeladat-identitásokra van szükség.",
+ "workloadIdentity": "Számításifeladat-identitás"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Áttekintés"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Keresés eszköz, felhasználó vagy a minőségi frissítés verziója alapján."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Nem sikerült betölteni az iOS-szoftverfrissítési profilokat"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS-frissítési profil",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profil"
+ },
+ "listLoadError": "Nem sikerült betölteni az iOS-szoftverfrissítési profilokat. Próbálkozzon újra később",
+ "lowercase": "iOS-frissítési szabályzat",
+ "uppercase": "iOS-frissítési szabályzat"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Sajnáljuk, az Apple-höz való csatlakozás és az elérhető verziók listájának lekérése nem sikerült. Próbálkozzon újra később, vagy folytassa a legújabb verzióval.",
+ "latestUpdate": "Legújabb frissítés",
+ "noLongerSupported": "A kijelölt verzió már nem támogatott",
+ "olderVersionSelected": "Korábbi verziót jelölt ki, ezért győződjön meg arról, hogy a szoftverfrissítések láthatóságát késleltető eszközkorlátozási szabályzatot alkalmaz, hogy az eszközök ne frissülhessenek a legújabb verzióra.",
+ "prefix": "Az iOS/iPadOS telepítése",
+ "selectSupported": "Válassza ki az Apple által támogatott frissítési verziót",
+ "updateToInstall": "Telepítendő frissítés"
+ },
+ "Schedule": {
+ "always": "Frissítés a következő bejelentkezéskor",
+ "duringTimeWindows": "Frissítés az ütemezett idő alatt",
+ "header": "Ha frissítési szabályzatot rendelnek egy eszközhöz, az Intune alapértelmezés szerint üzembe helyezi a legújabb frissítéseket az eszköz bejelentkezésekor. Ehelyett létrehozhat egy heti ütemezést is testreszabott kezdési és befejezési időpontokkal. Ha az ütemezett időn kívül kíván frissíteni, az Intune nem fogja üzembe helyezni a frissítéseket az ütemezett idő végéig.",
+ "infoBalloon": "A frissítés végrehajtásának időpontja. Az ütemezett időtartamok közben vagy azokon kívül történő frissítések ütemezéséhez további beavatkozásra van szükség.",
+ "label": "Ütemezéstípus",
+ "outsideActiveHours": "Frissítés az aktív órákon kívül (örökölt)",
+ "outsideTimeWindows": "Ütemezett időszakon kívüli frissítés",
+ "timeWindow": "Időszak",
+ "timeZone": "Időzóna",
+ "title": "Frissítési szabályzat ütemezési beállításai:",
+ "weekly": "Heti ütemezés",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "A frissítés időpontjában az eszközökre telepítendő iOS-/iPadOS-verzió.",
+ "label": "Válassza ki a telepítendő verziót"
+ },
+ "header": "Hozzon létre egy profilt, amellyel kényszerítheti a társított eszközökön a legújabb iOS-/iPadOS-frissítések automatikus telepítését. Ezek a beállítások határozzák meg, hogyan és mikor történjen a szoftverfrissítések üzembe helyezése. Ez a profil nem akadályozza meg, hogy a felhasználók manuálisan frissítsék az operációs rendszert; ez egy eszközkonfigurációs korlátozási szabályzattal akadályozható meg legfeljebb 90 napra. A frissítések csak a felügyelt eszközökre vonatkoznak.",
+ "notAvailable": "N. a."
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Nincsenek megjeleníthető iOS-frissítési szabályzatok",
+ "macOsUpdates": "Nincsenek megjeleníthető macOS-szoftver-frissítési szabályzatok",
+ "windowsUpdates": "Nincsenek megjelenítendő frissítési körök Windows 10 és újabb verziókhoz."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Eszköz neve",
+ "deviceUpdateStatus": "Eszköz frissítési állapota",
+ "lastUpdated": "Utoljára frissítve",
+ "osVersion": "Operációs rendszer verziója",
+ "userPrincipalName": "Felhasználónév"
+ },
+ "maximumOSVersionFilter": "Maximális operációsrendszer-verzió",
+ "minimumOSVersionFilter": "Minimális operációsrendszer-verzió",
+ "noData": "Nincsenek megjeleníthető adatok",
+ "searchBoxPlaceholder": "Keresés eszköznév, felhasználónév vagy operációsrendszer-verzió alapján",
+ "title": "macOS-eszközök fiókösszegzése"
+ },
+ "Category": {
+ "configurationDataFile": "Konfigurációs fájl",
+ "critical": "Kritikus",
+ "firmware": "Belső vezérlőprogram",
+ "other": "Egyéb"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Utolsó frissítés",
+ "successfulUpdateCount": "Sikeres frissítéstelepítések",
+ "totalUpdateCount": "Összes telepített frissítés",
+ "updateCategory": "Frissítési kategória",
+ "updateCategoryStatus": "Frissítési kategória állapota"
+ },
+ "noData": "Nincsenek megjeleníthető adatok"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Nem sikerült betölteni a macOS-szoftverfrissítési profilokat"
+ }
+ },
+ "State": {
+ "available": "Elérhető",
+ "commandFailed": "Nem sikerült végrehajtani a parancsot",
+ "downloadFailed": "Letöltés sikertelen.",
+ "downloadInsufficientNetwork": "Letöltés – elégtelen hálózati kapacitás",
+ "downloadInsufficientPower": "Letöltés – elégtelen akkumulátortöltöttség",
+ "downloadInsufficientSpace": "Letöltés – elégtelen lemezterület",
+ "downloaded": "Letöltve",
+ "downloading": "Letöltés",
+ "idle": "Tétlen",
+ "installFailed": "A telepítés nem sikerült",
+ "installInsufficientPower": "Telepítés – elégtelen akkumulátortöltöttség",
+ "installInsufficientSpace": "Telepítés – elégtelen lemezterület",
+ "installing": "Telepítés",
+ "scheduled": "Ütemezve",
+ "success": "Sikeres",
+ "unknown": "Ismeretlen"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Utolsó frissítés",
+ "updateName": "Frissítés neve",
+ "updateStatus": "Frissítés állapota",
+ "version": "Verzió"
+ },
+ "noData": "Nincsenek megjeleníthető adatok",
+ "searchBoxPlaceholder": "Keresés frissítésnév vagy -verzió alapján"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS-frissítési profil",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profil"
+ },
+ "error": "Hiba",
+ "errorOrErrors": "Hiba vagy hibák",
+ "errors": "Hibák",
+ "listLoadError": "Nem sikerült betölteni a macOS-szoftverfrissítési profilokat. Próbálkozzon újra később",
+ "lowercase": "macOS-frissítési szabályzat",
+ "other": "Egyéb",
+ "subtitle": "MacOS-szoftverfrissítés",
+ "upToDate": "Naprakész",
+ "uppercase": "macOS-frissítési szabályzat"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Próbálkozzon újra később",
+ "title": "Nem sikerült a(z) {0} törlése"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Próbálkozzon újra később"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Próbálkozzon újra később",
+ "title": "Nem sikerült betölteni a következőt: {0}"
+ },
+ "idWrongFormat": "A profilhoz megadott azonosító nem a várt formátumú."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "Válasszon ki legalább egy időablakot",
+ "tooMany": "Legfeljebb 20 időablakot lehet konfigurálni"
+ }
+ },
+ "endDay": "Záró nap",
+ "endTime": "Befejezés időpontja",
+ "startDay": "Kezdő nap",
+ "startTime": "Kezdő időpont",
+ "timeWindowError": "Válasszon egy legalább egyórás időtartamot."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Nem sikerült betölteni a Windows 10 és újabb verziók frissítési kör profiljait."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Frissítési kör Windows 10 és újabb verziókhoz",
+ "title": "Windows Update Vállalatoknak"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 és újabb rendszerek",
+ "title": "Frissítési kör Windows 10 és újabb verziókhoz"
+ },
+ "listLoadError": "Nem sikerült betölteni a frissítési kör profilokat a Windows 10 és újabb verziókhoz. Próbálkozzon újra később",
+ "lowercase": "Frissítési kör",
+ "uppercase": "Frissítési kör"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Szabályzatbeállítások frissítése",
+ "updateRingSettings": "Frissítési kör beállításai"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "{0} létrehozása",
+ "edit": "{0} szerkesztése"
+ }
+ },
+ "notScannedYet": "Még nem történt vizsgálat",
+ "outOfDateIosDevices": "Elavult iOS-eszközök"
+ },
+ "AppCategories": {
+ "microsoftEdge": "A Microsoft Edge 77-es és újabb verziói",
+ "storeApp": "Áruház-beli alkalmazás",
+ "office365Suite": "Microsoft 365-alkalmazások",
+ "microsoftDefenderATP": "Microsoft Defender for Endpoint",
+ "other": "Egyéb",
+ "webApplication": "Webalkalmazás"
+ },
+ "Filters": {
+ "ruleSyntax": "Szabály szintaxisa",
+ "filters": "Szűrők"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Válasszon felderítési szkriptet",
+ "scriptFileLabel": "Válassza ki az észlelési szkriptet"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Ha engedélyezve van, az eszközöknek meg kell felelnie a JSON-fájlban meghatározott egyéni szabályoknak egy felderítési PowerShell-szkript által visszaadott egyéni adatok alapján.",
+ "label": "Az Egyéni megfelelőség jelenleg az előzetes verzióban érhető el. Ha általánosan elérhetővé válik, további költségért hozzáadhatja a Microsoft Intune-t magában foglaló licencelési lehetőségekhez."
+ },
+ "ScriptPicker": {
+ "objectName": "Szkript",
+ "placeholder": "Kiválasztás kattintással",
+ "searchboxPlaceholder": "Keresés a szkript neve alapján",
+ "title": "Észlelési szkript kiválasztása"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Egyéni megfelelőségi szabályok összegzése"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "A JSON-fájl feltöltése és érvényesítése az egyéni megfelelőségi beállításokkal",
+ "noFileSelectedError": "Válasszon ki egy json-fájlt",
+ "parseFileSelectedError": "A json-fájl érvénytelen"
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Konfigurálja a PIN-kódra és a hitelesítő adatokra vonatkozó követelményeket, amelyeknek a felhasználóknak meg kell felelniük a munkahelyi környezetben az alkalmazások eléréséhez."
+ },
+ "DataProtection": {
+ "infoText": "Ez a csoport tartalmazza az olyan adatveszteség-megelőzési (DLP-) vezérlőket, mint például a kivágás, a másolás, a beillesztés és a mentés másként művelet korlátozásai. Ezek a beállítások határozzák meg, hogyan használhatják a felhasználók az alkalmazásokban található adatokat. "
+ },
+ "DeviceTypes": {
+ "selectOne": "Válasszon legalább egy eszköztípust."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Az összes eszköztípuson futó alkalmazások célzása"
+ },
+ "infoText": "Válassza ki, hogyan szeretné ezt a szabályzatot alkalmazni az alkalmazásokban a különböző eszközökön. Ezután adjon hozzá legalább egy alkalmazást.",
+ "selectOne": "Szabályzat létrehozásához legalább egy alkalmazást válasszon ki."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender for Endpoint",
+ "androidDeviceOwnerApplications": "Alkalmazások",
+ "androidDeviceOwnerPolicyMessages": "Egyéni támogatási információk",
+ "androidForWorkPassword": "Eszköz jelszava",
+ "appManagement": "Alkalmazások engedélyezése vagy letiltása",
+ "applicationGuard": "Microsoft Defender alkalmazásőr",
+ "applicationRestrictions": "Korlátozott alkalmazások",
+ "applicationVisibility": "Alkalmazások megjelenítése vagy elrejtése",
+ "applications": "Alkalmazásáruház",
+ "applicationsAndGames": "App Store, dokumentumok megtekintése, játékok",
+ "applicationsAndGoogle": "Google Play Áruház",
+ "appsAndExperience": "Alkalmazások és kezelőfelület",
+ "associatedDomains": "Társított tartományok",
+ "autonomousSingleAppMode": "Autonóm egyalkalmazásos mód",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Windowsos titkosítás",
+ "bootOptions": "Rendszerindítási lehetőségek",
+ "browser": "Böngésző",
+ "builtinApps": "Beépített alkalmazások",
+ "cameras": "Kamerák",
+ "cellular": "Mobiltelefon",
+ "cloudAndStorage": "Felhő és tárolás",
+ "cloudPrint": "Felhőbeli nyomtató",
+ "complianceEmailProfile": "E-mail",
+ "connectedDevices": "Csatlakoztatott eszközök",
+ "connectivity": "Mobiltelefon és kapcsolatok",
+ "contentCaching": "Tartalom-gyorsítótárazás",
+ "controlPanelAndSettings": "Vezérlőpult és Gépház",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Egyéni megfelelőség",
+ "customConfiguration": "Egyéni konfigurációs profil",
+ "customOMASettings": "Egyéni OMA-URI beállítások",
+ "customPreferences": "Preferenciafájl",
+ "dFCISecuritySettings": "Biztonsági beállítások",
+ "defender": "Microsoft Defender víruskereső",
+ "defenderAntivirus": "Microsoft Defender víruskereső",
+ "defenderExploitGuard": "Microsoft Defender - biztonsági rés kiaknázása elleni védelem",
+ "defenderFirewall": "Windows tűzfal",
+ "defenderLocalSecurityOptions": "Helyi eszközbiztonsági beállítások",
+ "defenderSecurityCenter": "Microsoft Defender biztonsági központ",
+ "deliveryOptimization": "Kézbesítésoptimalizálás",
+ "derivedCredentialAuthenticationConfiguration": "Származtatott hitelesítő adat",
+ "deviceExperience": "Eszköz által nyújtott élmény",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Microsoft Defender alkalmazás-ellenőrzés",
+ "deviceHealth": "Eszközállapot-figyelő",
+ "devicePassword": "Eszközjelszó",
+ "deviceProperties": "Eszköztulajdonságok",
+ "deviceRestrictions": "Általános",
+ "deviceSecurity": "Rendszerbiztonság",
+ "display": "Megjelenítés",
+ "domainJoin": "Csatlakozás tartományhoz",
+ "domains": "Tartományok",
+ "edgeBrowser": "Microsoft Edge Legacy (45-ös és korábbi verziók)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge kioszkmód",
+ "editionUpgrade": "Kiadásfrissítés",
+ "education": "Oktatás",
+ "educationDeviceCerts": "Eszköztanúsítványok",
+ "educationStudentCerts": "Diáktanúsítványok",
+ "educationTakeATest": "Vizsga",
+ "educationTeacherCerts": "Oktatói tanúsítványok",
+ "emailProfile": "E-mail",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Egyszeri bejelentkezéses alkalmazásbővítmény",
+ "filevault": "FileVault",
+ "firewall": "Tűzfal",
+ "games": "Játékok",
+ "gatekeeper": "Forgalomirányító",
+ "healthMonitoring": "Állapotmonitorozás",
+ "homeScreenLayout": "Kezdőképernyő-elrendezés",
+ "iOSWallpaper": "Tapéta",
+ "importedPFX": "Importált PKCS-tanúsítvány",
+ "iosDefenderAtp": "Microsoft Defender for Endpoint",
+ "iosKiosk": "Kioszkmód",
+ "kernelExtensions": "Kernelbővítmények",
+ "keyboardAndDictionary": "Billentyűzet és szótár",
+ "kiosk": "Kioszkmód",
+ "kioskAndroidEnterprise": "Dedikált eszközök",
+ "kioskConfiguration": "Kioszkmód",
+ "kioskConfigurationV2": "Kioszkmód",
+ "kioskWebBrowser": "Kioszkmódú webböngésző",
+ "lockScreenMessage": "Zárolási képernyőn látható üzenet",
+ "lockedScreenExperience": "Zárolási képernyő felülete",
+ "logging": "Jelentéskészítés és telemetria",
+ "loginItems": "Bejelentkezési elemek",
+ "loginWindow": "Bejelentkezési ablak",
+ "macDefenderAtp": "Microsoft Defender for Endpoint",
+ "maintenance": "Karbantartás",
+ "malware": "Kártevők",
+ "messaging": "Üzenetküldés",
+ "microphonesAndSpeakers": "Mikrofonok és hangszórók",
+ "networkBoundary": "Hálózathatár",
+ "networkProxy": "Hálózati proxy",
+ "notifications": "Alkalmazásértesítések",
+ "pKCS": "PKCS-tanúsítvány",
+ "password": "Jelszó",
+ "personalProfile": "Személyes profil",
+ "personalization": "Személyre szabás",
+ "policyOverride": "Csoportházirend felülbírálása",
+ "ports": "Portok",
+ "powerSettings": "Energiaellátási beállítások",
+ "printer": "Nyomtató",
+ "privacy": "Adatvédelem",
+ "privacyPerApp": "Alkalmazásonkénti adatvédelmi kivételek",
+ "privacyPreferences": "Adatvédelmi beállítások",
+ "projection": "Vetület",
+ "radios": "Rádiófrekvenciás kapcsolatok",
+ "sCCMCompliance": "Configuration Manager-megfelelőség",
+ "sCEP": "SCEP-tanúsítvány",
+ "sCEPProperties": "SCEP-tanúsítvány",
+ "sMode": "Módváltás (csak Windows Insider)",
+ "safari": "Safari",
+ "search": "Keresés",
+ "session": "Munkamenet",
+ "sharedDevice": "Megosztott iPad",
+ "sharedPCAccountManager": "Megosztott többfelhasználós eszköz",
+ "singleSignOn": "Egyszeri bejelentkezés",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Beállítások",
+ "start": "Indítás",
+ "systemExtensions": "Rendszerbővítmények",
+ "systemSecurity": "Rendszerbiztonság",
+ "trustedCert": "Megbízható tanúsítvány",
+ "uEFIAccess": "UEFI-hozzáférés",
+ "updates": "Frissítések",
+ "userRights": "Felhasználói jogok",
+ "usersAndAccounts": "Felhasználók és fiókok",
+ "vPN": "Alapszintű VPN",
+ "vPNApps": "Automatikus VPN",
+ "vPNAppsAndTrafficRules": "Alkalmazások és adatforgalmi szabályok",
+ "vPNConditionalAccess": "Feltételes hozzáférés",
+ "vPNConnectivity": "Hálózati kapcsolat",
+ "vPNDNSTriggers": "DNS-beállítások",
+ "vPNIKEv2": "IKEv2-beállítások",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Vegyes alagútkezelés",
+ "vPNTrustedNetwork": "Megbízható hálózatok észlelése",
+ "wakeSettings": "Ébresztési beállítások",
+ "webContentFilter": "Webes tartalomszűrés",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender for Endpoint",
+ "windowsDefenderATP": "Microsoft Defender for Endpoint",
+ "windowsHelloForBusiness": "Vállalati Windows Hello",
+ "windowsSpotlight": "Windows Reflektorfény",
+ "wiredNetwork": "Vezetékes hálózat",
+ "wireless": "Vezeték nélküli hálózat",
+ "wirelessProjection": "Vezeték nélküli kivetítés",
+ "workProfile": "Munkahelyi profil beállításai",
+ "workProfilePassword": "Munkahelyi profil jelszava",
+ "xboxServices": "Xbox-szolgáltatások",
+ "zebraMx": "MX-profil (csak Zebra)",
+ "complianceActionsLabel": "Műveletek meg nem felelés esetén"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Engedélyezett URL-címek",
+ "tooltip": "Adja meg azokat a webhelyeket, amelyekhez a felhasználók a munkahelyi környezetből hozzáférhetnek. A felhasználók a többi webhelyet nem érhetik el. Engedélyezési és tiltólistát is megadhat, de egyszerre mindkettőt nem adhatja meg."
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Alkalmazásproxy",
+ "title": "Alkalmazásproxy átirányítása",
+ "tooltip": "App Proxy-átirányítás engedélyezése, hogy a felhasználók elérhessék a vállalati hivatkozásokat és a helyszíni webalkalmazásokat."
+ },
+ "BlockedURLs": {
+ "title": "Blokkolt URL-címek",
+ "tooltip": "Adja meg azokat a webhelyeket, amelyek munkahelyi környezetből való elérését le szeretné tiltani a felhasználók számára. A felhasználók minden egyéb helyet elérhetnek. Engedélyezési és tiltólistát is megadhat, de egyszerre mindkettőt nem adhatja meg. "
+ },
+ "Bookmarks": {
+ "header": "Felügyelt könyvjelzők",
+ "tooltip": "Adja meg azon könyvjelzővel jelölt URL-címek listáját, amelyek elérhetők lesznek a felhasználók számára a Microsoft Edge munkahelyi környezetben való használatakor.",
+ "uRL": "URL-cím"
+ },
+ "HomepageURL": {
+ "header": "Felügyelt kezdőlap",
+ "title": "Kezdőlap parancsikonjának URL-címe",
+ "tooltip": "Állítson be egy kezdőlap-parancsikont, amely a keresősáv alatt az első ikonként jelenik meg, ha a felhasználók új lapot nyitnak meg a Microsoft Edge-ben."
+ },
+ "PersonalContext": {
+ "label": "Korlátozott webhelyek átirányítása a személyes környezetbe",
+ "tooltip": "Annak konfigurálása, hogy a felhasználók számára engedélyezni kell-e a személyes környezetre való váltást a korlátozott webhelyek megnyitásához."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home termékváltozat",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Adja meg a kulcsban tárolt bitek számát.",
- "keyUsage": "Adja meg a tanúsítvány nyilvános kulcsának cseréjéhez szükséges titkosítási műveletet.",
- "renewalThreshold": "Adja meg a tanúsítvány hátralévő élettartamának százalékában (1 és 99 százalék között), hogy az eszköz mikor kérheti leghamarabb a tanúsítvány megújítását. Az ajánlott érték az Intune-ban 20%. (1-99)",
- "rootCert": "Válasszon ki egy korábban konfigurált és hozzárendelt legfelső szintű hitelesítésszolgáltatói tanúsítványprofilt. A hitelesítésszolgáltatói tanúsítványnak meg kell egyeznie annak a hitelesítésszolgáltatónak a főtanúsítványával, amely a jelenleg konfigurált profilhoz kiadja a tanúsítványt.",
- "scepServerUrl": "Adja meg annak az NDES-kiszolgálónak az URL-címét, amely az SCEP használatával adja ki a tanúsítványokat (HTTPS-nek kell lennie). Példa: https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Adja meg annak az NDES-kiszolgálónak az URL-címét vagy -címeit, amely az SCEP használatával adja ki a tanúsítványokat. Példa: https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Tulajdonos alternatív neve",
- "subjectNameFormat": "Tulajdonosnév formátuma",
- "validityPeriod": "A tanúsítvány érvényességének lejártáig hátralévő idő. A tanúsítványsablonban megjelenő érvényességi időtartammal egyenlő vagy annál kisebb értéket adjon meg. Alapértelmezésként egy év van beállítva."
- },
- "appInstallContext": "Ez a beállítás határozza meg az alkalmazáshoz hozzárendelendő telepítési környezetet. A kettős módú alkalmazások esetében válassza ki az alkalmazáshoz használni kívánt környezetet. Ez minden más alkalmazás esetében előre ki van választva a csomag alapján, és nem lehet módosítani.",
- "autoUpdateMode": "Konfigurálja az alkalmazás frissítési prioritását. Válassza az Alapértelmezett lehetőséget, ha meg szeretné követelni, hogy az eszköz csatlakozzon a WiFi-hez, töltés alatt álljon, és ne legyen aktív használatban az alkalmazás frissítése előtt. A Magas prioritás lehetőséget választva azonnal frissítheti az alkalmazást, amint a fejlesztő közzétette azt, függetlenül a töltöttségi állapottól, a Wi-Fi-képességtől vagy az eszközön végzett végfelhasználói tevékenységtől. Válassza az Elhalasztva lehetőséget, hogy elhalassza az alkalmazásfrissítéseket 90 napig. A Magas prioritás és az elhalasztva csak DO-eszközök estén lép életbe.",
- "configurationSettingsFormat": "A konfigurációs beállítások szövegformázása",
- "ignoreVersionDetection": "A beállítást állítsa az Igen értékre azon alkalmazások esetében, melyeket automatikusan frissít az alkalmazás fejlesztője (mint például a Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Válassza az Igen lehetőséget olyan alkalmazások esetében, amelyeket automatikusan frissít az alkalmazásfejlesztő, vagy ha csak az alkalmazás bundleID azonosítóját szeretné ellenőrizni a telepítés előtt. Ha az alkalmazás bundleID azonosítóját és verziószámát is szeretné ellenőrizni a telepítés előtt, válassza a Nem lehetőséget.",
- "installAsManagedMacOSLobApp": "Ez a beállítás csak a macOS 11-es és újabb verzióra vonatkozik. Az alkalmazás telepítve lesz, de nem lesz felügyelet alá vonva a macOS 10.15-ös és korábbi verzióin.",
- "installContextDropdown": "Válassza ki a megfelelő telepítési hatókört. Felhasználószintű telepítés esetén az alkalmazás csak a célfelhasználó számára települ, míg az eszközszintű telepítés esetében az alkalmazás az eszköz összes felhasználója számára telepítve lesz.",
- "ldapUrl": "Ez az az LDAP-állomásnév, ahonnan az ügyfelek megkapják az e-mail-címzettek nyilvános titkosítási kulcsait. Az e-mailek titkosítva lesznek, ha rendelkezésre áll egy kulcs. Támogatott formátumok:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Válassza ki a társított alkalmazás futtatókörnyezeti engedélyeit.",
- "policyAssociatedApp": "Válassza ki az alkalmazást, amelyhez a szabályzat társítva lesz.",
- "policyConfigurationSettings": "Válassza ki a szabályzat konfigurációs beállításainak megadásához használni kívánt módszert.",
- "policyDescription": "Megadhatja a konfigurációs szabályzat leírását.",
- "policyEnrollmentType": "Válassza ki, hogy ezek a beállítások az eszközkezeléssel, vagy pedig az Intune SDK-val létrehozott alkalmazásokkal legyenek-e kezelve.",
- "policyName": "Adja meg a konfigurációs szabályzat nevét.",
- "policyPlatform": "Válassza ki a platformot, amelyre az alkalmazáskonfigurálási szabályzat érvényes lesz.",
- "policyProfileType": "Válassza ki eszközprofiltípusokat, amelyekre ez az alkalmazáskonfigurációs profil érvényes lesz",
- "policySMime": "Az S/MIME-alapú aláírás és titkosítás beállításainak konfigurálása az Outlookban.",
- "sMimeDeployCertsFromIntune": "Annak megadása, hogy az S/MIME-tanúsítványokat az Intune-ból kézbesíti-e a rendszer az Outlookban való használatra.\r\nAz Intune automatikusan képes telepíteni az aláírási és titkosítási tanúsítványokat a felhasználók számára a Céges portálon keresztül.",
- "sMimeEnable": "Annak megadása, hogy engedélyezve vannak-e az S/MIME-vezérlők e-mail írásakor",
- "sMimeEnableAllowChange": "Adja meg, hogy a felhasználó módosíthatja-e az S/MIME engedélyezése beállítást.",
- "sMimeEncryptAllEmails": "Annak megadása, hogy az összes e-mailt titkosítani kell-e vagy sem. \r\nA titkosítás egy rejtjelező szöveggel konvertálja az adatokat úgy, hogy azokat csak a címzett tudja elolvasni.",
- "sMimeEncryptAllEmailsAllowChange": "Adja meg, hogy a felhasználó módosíthatja-e az Összes e-mail titkosítása beállítást.",
- "sMimeEncryptionCertProfile": "Az e-mailek titkosításához használandó tanúsítványprofil megadása.",
- "sMimeSignAllEmails": "Annak megadása, hogy az összes e-mailt alá kell-e írni vagy sem.\r\nDigitális aláírás használatával ellenőrizhető az e-mail hitelessége, és biztosítható, hogy a tartalmát ne módosítsák illetéktelenül átvitel közben.",
- "sMimeSignAllEmailsAllowChange": "Adja meg, hogy a felhasználó módosíthatja-e az Összes e-mail aláírása beállítást.",
- "sMimeSigningCertProfile": "Az e-mailek aláírásához használandó tanúsítványprofil megadása.",
- "sMimeUserNotificationType": "A felhasználók arról való értesítésének módja, hogy meg kell nyitniuk a Céges portált az Outlook S/MIME-tanúsítványainak lekéréséhez."
- },
+ "Languages": {
+ "ar-aE": "arab (E.A.E.)",
+ "ar-bH": "arab (Bahrein)",
+ "ar-dZ": "arab (Algéria)",
+ "ar-eG": "arab (Egyiptom)",
+ "ar-iQ": "arab (Irak)",
+ "ar-jO": "arab (Jordánia)",
+ "ar-kW": "arab (Kuvait)",
+ "ar-lB": "arab (Libanon)",
+ "ar-lY": "arab (Líbia)",
+ "ar-mA": "arab (Marokkó)",
+ "ar-oM": "arab (Omán)",
+ "ar-qA": "arab (Katar)",
+ "ar-sA": "arab (Szaúd-Arábia)",
+ "ar-sY": "arab (Szíria)",
+ "ar-tN": "arab (Tunézia)",
+ "ar-yE": "arab (Jemen)",
+ "az-cyrl": "azerbajdzsáni (cirill betűs, Azerbajdzsán)",
+ "az-latn": "azerbajdzsáni (latin betűs, Azerbajdzsán)",
+ "bn-bD": "bangla (Banglades)",
+ "bn-iN": "bangla (India)",
+ "bs-cyrl": "bosnyák (cirill betűs)",
+ "bs-latn": "bosnyák (latin betűs)",
+ "zh-cN": "kínai (kínai népköztársasági)",
+ "zh-hK": "kínai (hongkongi k.k.t.)",
+ "zh-mO": "kínai (Makaó KKT)",
+ "zh-sG": "kínai (Szingapúr)",
+ "zh-tW": "kínai (tajvani)",
+ "hr-bA": "horvát (latin betűs)",
+ "hr-hR": "horvát (Horvátország)",
+ "nl-bE": "holland (Belgium)",
+ "nl-nL": "holland (Hollandia)",
+ "en-aU": "angol (Ausztrália)",
+ "en-bZ": "angol (Belize)",
+ "en-cA": "angol (Kanada)",
+ "en-cabn": "angol (Karib-térség)",
+ "en-iE": "angol (Írország)",
+ "en-iN": "angol (India)",
+ "en-jM": "angol (Jamaica)",
+ "en-mY": "angol (Malajzia)",
+ "en-nZ": "angol (Új-Zéland)",
+ "en-pH": "angol (Fülöp-szigeteki)",
+ "en-sG": "angol (Szingapúr)",
+ "en-tT": "angol (Trinidad és Tobago)",
+ "en-uK": "angol (Egyesült Királyság)",
+ "en-uS": "angol (Egyesült Államok)",
+ "en-zA": "angol (Dél-Afrika)",
+ "en-zW": "angol (Zimbabwe)",
+ "fr-bE": "francia (Belgium)",
+ "fr-cA": "francia (Kanada)",
+ "fr-cH": "francia (Svájc)",
+ "fr-fR": "francia (Franciaország)",
+ "fr-lU": "francia (Luxemburg)",
+ "fr-mC": "francia (Monaco)",
+ "de-aT": "német (Ausztria)",
+ "de-cH": "német (Svájc)",
+ "de-dE": "német (Németország)",
+ "de-lI": "német (Liechtenstein)",
+ "de-lU": "német (Luxemburg)",
+ "iu-cans": "inuktitut (szótagírás, Kanada)",
+ "iu-latn": "inuktitut (latin betűs, Kanada)",
+ "it-cH": "olasz (Svájc)",
+ "it-iT": "olasz (Olaszország)",
+ "ms-bN": "maláj (Brunei Szultanátus)",
+ "ms-mY": "maláj (Malajzia)",
+ "mn-cN": "mongol (hagyományos mongol, kínai népköztársasági)",
+ "mn-mN": "mongol (cirill betűs, Mongólia)",
+ "no-nB": "norvég, bokmål (Norvégia)",
+ "no-nn": "norvég, nynorsk (Norvégia)",
+ "pt-bR": "Portugál (brazíliai)",
+ "pt-pT": "Portugál (portugáliai)",
+ "quz-bO": "kecsua (Bolívia)",
+ "quz-eC": "kecsua (Ecuador)",
+ "quz-pE": "kecsua (Peru)",
+ "smj-nO": "számi, lulei (Norvégia)",
+ "smj-sE": "számi, lulei (Svédország)",
+ "se-fI": "számi, északi (Finnország)",
+ "se-nO": "számi, északi (Norvégia)",
+ "se-sE": "számi, északi (Svédország)",
+ "sma-nO": "számi, déli (Norvégia)",
+ "sma-sE": "számi, déli (Svédország)",
+ "smn": "számi, inari (Finnország)",
+ "sms": "számi, kolta (Finnország)",
+ "sr-Cyrl-bA": "szerb (cirill betűs)",
+ "sr-Cyrl-rS": "szerb (cirill betűs, [a volt] Szerbia és Montenegró)",
+ "sr-Latn-bA": "szerb (latin betűs)",
+ "sr-Latn-rS": "szerb (latin, Szerbia)",
+ "dsb": "alsó-szorb (Németország)",
+ "hsb": "felső-szorb (Németország)",
+ "es-es-tradnl": "spanyol (Spanyolország, hagyományos rendezés)",
+ "es-aR": "spanyol (Argentína)",
+ "es-bO": "spanyol (Bolívia)",
+ "es-cL": "spanyol (Chile)",
+ "es-cO": "spanyol (Kolumbia)",
+ "es-cR": "spanyol (Costa Rica)",
+ "es-dO": "spanyol (Dominikai Köztársaság)",
+ "es-eC": "spanyol (Ecuador)",
+ "es-eS": "spanyol (spanyolországi)",
+ "es-gT": "spanyol (Guatemala)",
+ "es-hN": "spanyol (Honduras)",
+ "es-mX": "spanyol (Mexikó)",
+ "es-nI": "spanyol (Nicaragua)",
+ "es-pA": "spanyol (Panama)",
+ "es-pE": "spanyol (Peru)",
+ "es-pR": "spanyol (Puerto Rico)",
+ "es-pY": "spanyol (Paraguay)",
+ "es-sV": "spanyol (Salvador)",
+ "es-uS": "spanyol (Egyesült Államok)",
+ "es-uY": "spanyol (Uruguay)",
+ "es-vE": "spanyol (Venezuela)",
+ "sv-fI": "svéd (Finnország)",
+ "uz-cyrl": "üzbég (cirill betűs, Üzbegisztán)",
+ "uz-latn": "üzbég (latin betűs, Üzbegisztán)",
+ "af": "afrikaans (Dél-Afrika)",
+ "sq": "albán (Albánia)",
+ "am": "amhara (Etiópia)",
+ "hy": "örmény (Örményország)",
+ "as": "asszámi (India)",
+ "ba": "baskír (Oroszország)",
+ "eu": "baszk (baszk)",
+ "be": "belarusz (Belarusz)",
+ "br": "breton (Franciaország)",
+ "bg": "bolgár (Bulgária)",
+ "ca": "katalán (katalán)",
+ "co": "korzikai (Franciaország)",
+ "cs": "cseh (Cseh Köztársaság)",
+ "da": "dán (Dánia)",
+ "dv": "divehi (Maldív-szigetek)",
+ "et": "észt (Észtország)",
+ "fo": "feröeri (Feröer-szigetek)",
+ "fil": "filippínó (Fülöp-szigetek)",
+ "fi": "finn (Finnország)",
+ "gl": "gallego (Galícia)",
+ "ka": "grúz (Grúzia)",
+ "el": "görög (Görögország)",
+ "gu": "gudzsaráti (India)",
+ "ha": "hausza (latin betűs, Nigéria)",
+ "he": "héber (Izrael)",
+ "hi": "hindi (India)",
+ "hu": "magyar (Magyarország)",
+ "is": "izlandi (Izland)",
+ "ig": "igbo (Nigéria)",
+ "id": "indonéz (Indonézia)",
+ "ga": "ír (Írország)",
+ "xh": "xhosza (Dél-Afrika)",
+ "zu": "zulu (Dél-Afrika)",
+ "ja": "japán (Japán)",
+ "kn": "kannada (India)",
+ "kk": "kazak (Kazahsztán)",
+ "km": "khmer (Kambodzsa)",
+ "rw": "kinyarvanda (Ruanda)",
+ "sw": "szuahéli (Kenya)",
+ "kok": "kónkáni (India)",
+ "ko": "koreai (Korea)",
+ "ky": "kirgiz (Kirgizisztán)",
+ "lo": "lao (laoszi)",
+ "lv": "lett (Lettország)",
+ "lt": "litván (Litvánia)",
+ "lb": "luxemburgi (Luxemburg)",
+ "mk": "Macedón (Észak-Macedónia)",
+ "ml": "malajálam (India)",
+ "mt": "máltai (Málta)",
+ "mi": "maori (Új-Zéland)",
+ "mr": "maráthi (India)",
+ "moh": "mohawk (Mohawk)",
+ "ne": "nepáli (Nepál)",
+ "oc": "okszitán (Franciaország)",
+ "or": "odia (India)",
+ "ps": "pasto (Afganisztán)",
+ "fa": "perzsa",
+ "pl": "lengyel (Lengyelország)",
+ "pa": "pandzsábi (India)",
+ "ro": "román (Románia)",
+ "rm": "rétoromán (Svájc)",
+ "ru": "orosz (Oroszország)",
+ "sa": "szanszkrit (India)",
+ "st": "északi szoto (Dél-Afrika)",
+ "tn": "setswana (Dél-Afrika)",
+ "si": "szingaléz (Srí Lanka)",
+ "sk": "szlovák (Szlovákia)",
+ "sl": "szlovén (Szlovénia)",
+ "sv": "svéd (Svédország)",
+ "syr": "szír (Szíria)",
+ "tg": "tadzsik (cirill betűs, Tádzsikisztán)",
+ "ta": "tamil (India)",
+ "tt": "tatár (Oroszország)",
+ "te": "telugu (India)",
+ "th": "thai (Thaiföld)",
+ "bo": "tibeti (kínai népköztársasági)",
+ "tr": "török (Törökország)",
+ "tk": "türkmén (Türkmenisztán)",
+ "uk": "ukrán (Ukrajna)",
+ "ur": "urdu (pakisztáni iszlám köztársasági)",
+ "vi": "vietnami (Vietnam)",
+ "cy": "walesi (Egyesült Királyság)",
+ "wo": "volof (Szenegál)",
+ "ii": "ji (kínai népköztársasági)",
+ "yo": "joruba (Nigéria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Beépített szerepkör",
+ "customCloudPCRole": "Egyéni Windows 365-szerepkör",
+ "customIntuneRole": "Egyéni Intune-szerepkör",
+ "customRole": "Egyéni szerepkör"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "Alkalmazásverzió",
+ "dependencyName": "Függőség neve",
+ "lastModifiedTime": "Utolsó módosítás időpontja",
+ "relationship": "Kapcsolat",
+ "replaced": "Lecserélve",
+ "searchPlaceholder": "Szűrés alkalmazásnév alapján",
+ "status": "Állapotadatok",
+ "statusDetails": "Állapot",
+ "supersedenceName": "Helyettesítés neve"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Gyermekfüggőség",
+ "indirectSupersedence": "Nem kapcsolódik közvetlenül",
+ "supersedenceAncestors": "Helyettesítő",
+ "supersedenceDescendants": "Helyettesítve"
+ },
+ "SupersededReplaced": {
+ "no": "Nem",
+ "yes": "Igen"
+ },
+ "Tabs": {
+ "chart": "Diagram",
+ "dependency": "Függőség",
+ "label": "Nézet: ",
+ "supersedence": "Helyettesítés",
+ "table": "Tábla"
+ },
+ "dependencyGraphAriaLabel": "Alkalmazásközi függőségi diagram",
+ "supersedenceGraphAriaLabel": "Alkalmazás-helyettesítési diagram"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "A kényszerített újraindításig hátralévő napok száma"
+ },
+ "Description": {
+ "label": "Leírás"
+ },
+ "Name": {
+ "label": "Név"
+ },
+ "QualityUpdateRelease": {
+ "label": "Minőségi frissítések gyorsított telepítése, ha az eszköz operációsrendszer-verziója a következőnél régebbi:"
+ },
+ "bladeTitle": "Minőségi frissítések Windows 10-es és újabb verziókhoz (előzetes verzió)",
+ "loadError": "A betöltés sikertelen!"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Beállítások"
+ },
+ "infoBoxText": "A jelenleg elérhető egyetlen dedikált minőségifrissítés-szabályozási lehetőség a Windows 10-es vagy újabb frissítési körök szabályzatán kívül a minőségi frissítések felgyorsítása azon eszközökön, amelyek esetében a javítási szint a megadott értéket nem érti el. A jövőben további szabályozási lehetőségek is elérhetők lesznek.",
+ "licenseLearnMoreText": "További információ az előfeltételekről és a minőségi frissítési szabályzatokról.",
+ "licenseWarningBoxText": "A minőségi frissítési szabályzatok létrehozásához meghatározott licencre van szükség.",
+ "warningBoxText": "A szoftverfrissítések felgyorsításával csökkenthető a megfelelőség eléréséhez szükséges idő, azonban nagyobb hatással van a végfelhasználói termelékenységre. Jelentősen nagyobb eséllyel fordulhat elő újraindítás munkaidőben."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "Android rendszeren engedélyezheti PIN kód helyett az ujjlenyomatos azonosítás használatát. Ha a felhasználó munkahelyi fiókkal próbál meg hozzáférni az alkalmazáshoz, a rendszer ujjlenyomatot kér tőle.",
+ "iOS": "iOS vagy iPadOS rendszerű eszközökön engedélyezheti PIN-kód helyett az ujjlenyomatos azonosítás használatát. Ha a felhasználó munkahelyi fiókkal próbál meg hozzáférni az alkalmazáshoz, a rendszer PIN-kód beírása helyett ujjlenyomatot kér tőle.",
+ "mac": "Mac-eszközökön engedélyezheti PIN-kód helyett az ujjlenyomatos azonosítás használatát. Ha a felhasználó munkahelyi fiókkal próbál meg hozzáférni az alkalmazáshoz, a rendszer ujjlenyomatot kér tőle."
+ },
+ "allowWidgetContentSync": "Válassza a Letiltás lehetőséget, ha meg szeretné akadályozni, hogy a szabályzattal felügyelt alkalmazások adatokat mentsenek az alkalmazás vezérlőibe. Ha az Engedélyezés lehetőséget választja, a szabályzattal felügyelt alkalmazás adatokat menthet az alkalmazás vezérlőibe, ha ezek a funkciók támogatottak és engedélyezve vannak a szabályzattal felügyelt alkalmazásban. \r\n\r\n \r\n\r\nAz alkalmazások további konfigurációs képességeket biztosíthatnak az alkalmazáskonfigurációs szabályzatok révén. További információért tekintse meg az alkalmazás dokumentációját.",
+ "appSharingFromLevel1": "Válassza ki az alábbi beállítások közül, hogy az alkalmazás milyen alkalmazásoktól fogadhat adatokat:",
+ "appSharingFromLevel2": "{0}: Csak más, szabályzattal felügyelt alkalmazásokból érkező adatok fogadásának engedélyezése a szervezeti dokumentumokban vagy fiókokban",
+ "appSharingFromLevel3": "{0}: Bármely alkalmazásból érkező adatok fogadásának engedélyezése szervezeti dokumentumokban vagy fiókokban",
+ "appSharingFromLevel4": "{0}: Nem engedélyezett semmilyen alkalmazásból érkező adatok fogadása sem a szervezeti dokumentumokban vagy fiókokban",
+ "appSharingFromLevel5": "{0}: Az adatátvitel engedélyezése bármely alkalmazásból és a felhasználói identitás nélküli bejövő adatok céges adatokként való kezelése.",
+ "appSharingToLevel1": "Válassza ki az alábbi beállítások közül, hogy az alkalmazás milyen alkalmazásoknak küldhessen adatokat:",
+ "appSharingToLevel2": "{0}: Szervezeti adatok küldésének engedélyezése kizárólag más, szabályzat által felügyelt alkalmazásokba",
+ "appSharingToLevel3": "{0}: Szervezeti adatok küldésének engedélyezése bármely alkalmazásba",
+ "appSharingToLevel4": "{0}: Nem engedélyezett szervezeti adatok küldése semmilyen alkalmazásba",
+ "appSharingToLevel5": "{0}: Csak a szabályzat által felügyelt egyéb alkalmazásokba történő adatátvitel és a regisztrált eszközök MDM által felügyelt egyéb alkalmazásaiba való fájlátvitel engedélyezése",
+ "appSharingToLevel6": "{0}: Csak a szabályzat által felügyelt egyéb alkalmazásokba történő adatátvitel engedélyezése és csak a szabályzat által felügyelt alkalmazások megjelenítése az operációs rendszer Megnyitás és Megosztás párbeszédpaneljeinek szűrésével",
+ "assignmentFilterEdit1": "Ha hozzárendelési szűrőket alkalmaz erre a szabályzatra, a „Eszközkezelési típus” tulajdonság az „Alkalmazások” oldalon a „Cél minden eszköztípuson lévő alkalmazásokra” és az „Eszköztípusok” lapon megadott értékeken felül fog vonatkozni.",
+ "assignmentFilterEdit2": "További információ a z alkalmazásvédelmi szabályzatok hozzárendeléséről.",
+ "conditionalEncryption1": "A(z) {0} lehetőséget választva a belső alkalmazástár esetében letilthatja az alkalmazástitkosítást, ha a rendszer eszköztitkosítást észlel egy regisztrált eszközön.",
+ "conditionalEncryption2": "Megjegyzés: az Intune csak az Intune MDM esetében észleli az eszközregisztrációt. A külső alkalmazástár továbbra is titkosítva lesz annak érdekében, hogy a nem felügyelt alkalmazások ne férhessenek hozzá az adatokhoz.",
+ "contactSyncMac": "Ha a beállítás le van tiltva, az alkalmazások nem tudják a natív címjegyzékbe menteni a névjegyeket.",
+ "contactsSync": "Válassza a Letiltás lehetőséget annak megakadályozásához, hogy a szabályzattal felügyelt alkalmazások adatokat mentsenek az eszköz natív alkalmazásaiba (például a Névjegyek, a Naptár és a vezérlők), vagy hogy a szabályzattal felügyelt alkalmazásokon belül megakadályozza a bővítmények használatát. Ha az Engedélyezés lehetőséget választja, a szabályzattal felügyelt alkalmazás menthet adatokat a natív alkalmazásokba vagy használhat bővítményeket, ha ezek a funkciók támogatottak és engedélyezettek a szabályzattal felügyelt alkalmazáson belül.
Az alkalmazások további konfigurációs lehetőségeket biztosíthatnak az alkalmazáskonfigurációs szabályzatokkal. További információért tekintse meg az alkalmazás dokumentációját.",
+ "deviceTypeTargetingCreate1": "Az eszköztípusok célzása át lett helyezve a szabályzat-létrehozás Hozzárendelések lépésére.",
+ "deviceTypeTargetingEdit1": "Ha hozzárendelési szűrőket alkalmaz erre a szabályzatra, a „Eszközkezelési típus” tulajdonság az „Alkalmazások” oldalon a „Cél minden eszköztípuson lévő alkalmazásokra” és az „Eszköztípusok” lapon megadott értékeken felül fog vonatkozni.",
+ "deviceTypeTargetingEdit2": "Az eszközkezelési típusok célzásának szerkesztéséhez állítsa vissza a „Cél minden eszköztípuson lévő alkalmazásokra” beállítást = „Igen” értékre. Ezután hozzon létre egy MAM hozzárendelési szűrőt a kívánt „Eszközkezelési típus” értékekkel.",
+ "deviceTypeTargetingHasMoved": "További információ a z alkalmazásvédelmi szabályzatok hozzárendeléséről",
+ "encryptionAndroid1": "Az Intune-alapú mobilalkalmazás-felügyeleti szabályzathoz társított alkalmazások esetén a Microsoft szolgáltatja a titkosítást. Az adatok titkosítása szinkron módon, a mobilalkalmazás-felügyeleti szabályzatban megadott beállításoknak megfelelően történik a bemeneti/kimeneti fájlműveletek során. A felügyelt Android-alkalmazások AES-128 szabványú titkosítást alkalmaznak CBC módban, a platform kriptográfiai kódtárait használva. A titkosítási módszer nem felel meg a FIPS 140-2 szabványnak. Az SHA-256 szabványú titkosítás explicit utasításként, a SigAlg paraméterrel használható, de csak a 4.2-es és újabb verziójú eszközökön működik. Az eszköz tárolóján tárolt tartalmat a rendszer mindig titkosítja.",
+ "encryptionAndroid2": "Ha az alkalmazásszabályzatban előírja a titkosítás használatát, a végfelhasználónak PIN-kódot kell beállítania és használnia az eszköze eléréséhez. Ha nincs beállítva PIN-kód az eszközhöz való hozzáféréshez, az alkalmazások nem indulnak el, a felhasználó pedig a következőhöz hasonló üzenetet fog látni: „Munkahelye PIN-kód engedélyezését írja elő az eszközön az alkalmazás eléréséhez.”",
+ "encryptionMac1": "Az Intune-alapú mobilalkalmazás-felügyeleti szabályzathoz társított alkalmazások számára a Microsoft szolgáltatja a titkosítást. Az adatok titkosítása szinkron módon, a mobilalkalmazás-felügyeleti szabályzatban megadott beállításoknak megfelelően történik a bemeneti/kimeneti fájlműveletek során. A felügyelt Mac-alkalmazások AES-128 szabványú titkosítást alkalmaznak CBC módban, a platform kriptográfiai kódtárait használva. A titkosítási módszernek nem felel meg a FIPS 140-2 szabványnak. Az SHA-256 szabványú titkosítás explicit utasításként, a SigAlg paraméterrel használható, de csak a 4.2-es és újabb verziójú eszközökön működik. Az eszköz tárterületén tárolt tartalmat a rendszer mindig titkosítja.",
+ "faceId1": "Ahol lehetséges, engedélyezheti PIN-kód helyett az arcfelismerés használatát. A rendszer kéri a felhasználókat, hogy biztosítsák az arcfelismerést, amikor a munkahelyi fiókjukkal férnek hozzá ehhez az alkalmazáshoz.",
+ "faceId2": "Válassza az Igen lehetőséget PIN-kód helyett az arcfelismerés használatának engedélyezéséhez az alkalmazás-hozzáféréshez.",
+ "managementLevelsAndroid1": "Ezzel a beállítással megadhatja, hogy a szabályzat androidos eszközfelügyelet által felügyelt eszközökre, Android Enterprise-eszközökre vagy nem felügyelt eszközökre vonatkozik.",
+ "managementLevelsAndroid2": "{0}: A nem felügyelt eszközök azok az eszközök, melyek esetében a rendszer nem észlelte az Intune MDM általi felügyeletet. Ide tartoznak a külső MDM-szállítók is.",
+ "managementLevelsAndroid3": "{0}: Intune által felügyelt eszközök, amelyek az Android Device Administration API-t használják.",
+ "managementLevelsAndroid4": "{0}: Intune által felügyelt eszközök, amelyek az Android Enterprise munkahelyi profilokat vagy az Android Enterprise teljes körű eszközfelügyeletet használják.",
+ "managementLevelsIos1": "Ezzel a beállítással adható meg, hogy a szabályzat az MDM által felügyelt vagy a nem felügyelt eszközökre érvényes.",
+ "managementLevelsIos2": "{0}: A nem felügyelt eszközök azok az eszközök, melyek esetében a rendszer nem észlelte az Intune MDM általi felügyeletet. Ide tartoznak a külső MDM-szállítók is.",
+ "managementLevelsIos3": "{0}: A felügyelt eszközöket az Intune MDM felügyeli.",
+ "minAppVersion": "Az alkalmazás azon szükséges minimális verziószámának megadása, mellyel a felhasználóknak rendelkezniük kell ahhoz, hogy biztonságos hozzáférést kapjanak az alkalmazáshoz.",
+ "minAppVersionWarning": "Az alkalmazás azon ajánlott minimális verziószámának megadása, mellyel a felhasználóknak rendelkezniük kell az alkalmazás biztonságos eléréséhez.",
+ "minOsVersion": "Az operációs rendszer azon szükséges minimális verziószámának megadása, mellyel a felhasználóknak rendelkezniük kell ahhoz, hogy biztonságos hozzáférést kapjanak az alkalmazáshoz.",
+ "minOsVersionWarning": "Az operációs rendszer azon ajánlott minimális verziószámának megadása, mellyel a felhasználóknak rendelkezniük kell ahhoz, hogy biztonságos hozzáférést kapjanak az alkalmazáshoz.",
+ "minPatchVersion": "Az androidos biztonsági javítás azon legrégebbi verziójának megadása, amellyel a felhasználók még biztonságosan elérhetik az alkalmazást.",
+ "minPatchVersionWarning": "Az androidos biztonsági javítás azon javasolt legrégebbi verziójának megadása, amellyel a felhasználók még biztonságosan elérhetik az alkalmazást.",
+ "minSdkVersion": "Az Intune alkalmazásvédelmi szabályzatai azon szükséges minimális SDK-verziójának megadása, mellyel a felhasználóknak rendelkezniük kell ahhoz, hogy biztonságos hozzáférést kapjanak az alkalmazáshoz.",
+ "requireAppPinDefault": "
Az Igen lehetőség kiválasztásával letilthatja az alkalmazás PIN-kódját eszközzárolás egy regisztrált eszközön való észlelésekor.
",
+ "targetAllApps1": "Ezzel a beállítással célozhatók meg tetszőleges felügyeleti állapotú eszközökön található alkalmazások a szabályzattal.",
+ "targetAllApps2": "A rendszer felülírja ezt a beállítást a szabályzatütközések feloldása során, ha egy felhasználó egy adott felügyeleti állapotot célzó szabályzattal rendelkezik.",
+ "touchId2": "A(z) {0} beállítással PIN-kód helyett ujjlenyomatos azonosítást írhat elő az alkalmazás eléréséhez."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Adja meg, hogy hány nap elteltével kell a felhasználónak új PIN-kódot beállítania.",
+ "previousPinBlockCount": "Ezzel a beállítással adható meg az Intune által megőrzött korábbi PIN-kódok száma. Minden új PIN-nek az Intune által megőrzöttektől különbözőnek kell lennie."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Ezzel a beállítással engedélyezhető, hogy a Windows Search továbbra is kereshessen a titkosított adatok között.",
+ "authoritativeIpRanges": "Ennek a beállításnak az engedélyezésével felülbírálhatja az IP-címtartományok automatikus észlelését a Windowsban.",
+ "authoritativeProxyServers": "Ennek a beállításnak az engedélyezésével felülbírálhatja a proxykiszolgálók automatikus észlelését a Windowsban.",
+ "checkInput": "Ellenőrizze a bemenetek érvényességét",
+ "dataRecoveryCert": "A helyreállítási tanúsítvány egy speciális titkosított fájlrendszer (EFS), amellyel helyreállíthatók a titkosított fájlok, ha a titkosítási kulcs elveszne vagy megsérülne. Hozzon létre egy helyreállítási tanúsítványt, és adja meg itt. További információt itt talál.",
+ "enterpriseCloudResources": "
Adja meg azokat a felhőerőforrásokat, amelyeket cégesként szeretne kezelni és Windows Information Protection-szabályzattal szeretne védeni. Több erőforrás is megadható, ha elválasztja az egyes bejegyzéseket a | karakterrel.
Ha a cég rendelkezik proxykonfigurációval, akkor megadhatja azt a proxyt, amelyen keresztül a forgalom a megadott felhőerőforrásokba lesz továbbítva.
Adja meg a céges hálózatot kialakító IPv4-tartományokat. Ezeket a rendszer a céges hálózati határok meghatározásához megadott céges hálózati tartománynevekkel összefüggésben használja.
Ennek a beállításnak a megadása kötelező a Windows Information Protection engedélyezéséhez.
Az egyes bejegyzéseket vesszővel elválasztva több tartományt is megadhat.
Adja meg a céges hálózatot kialakító IPv6-tartományokat. Ezeket a rendszer a céges hálózati határok meghatározásához megadott céges hálózati tartománynevekkel összefüggésben használja.
Az egyes bejegyzéseket vesszővel elválasztva több tartományt is megadhat.
Ha a cégnél proxy van konfigurálva, megadhatja azt a proxyt, amelyen keresztül a Vállalati felhőalapú erőforrások menü beállításaiban megadott felhőbeli erőforrások felé irányuló forgalmat át szeretné irányítani.
Több érték megadásához pontosvesszővel válassza el az egyes bejegyzéseket.
Adja meg a céges hálózatot kialakító DNS-neveket. Ezeket a rendszer a céges hálózati határok meghatározásához megadott IP-tartományokkal összefüggésben használja. Az egyes bejegyzéseket vesszővel elválasztva több értéket is megadhat.
Ennek a beállításnak a megadása kötelező a Windows Information Protection engedélyezéséhez.
Például: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Itt adhatja meg a vállalati hálózatot alkotó DNS-neveket. Ezek a vállalati hálózathatárt definiáló IP-címtartományokkal együtt használatosak. Több értéket is megadhat a függőleges vonal (|) karakterrel elválasztva.
Ez a beállítás szükséges a Windows Information Protection engedélyezéséhez.
Példa: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
Ha a hálózat kifelé irányuló proxykat tartalmaz, itt adhatja meg őket. A proxykiszolgáló címének megadásakor adja meg azt a portot is, amelyen keresztül a Windows Information Protection engedélyezni és védeni fogja a forgalmat.
Megjegyzés: a lista nem tartalmazhat a vállalati belső proxykiszolgálók listáján szereplő kiszolgálókat. Több érték megadásához pontosvesszővel válassza el az egyes bejegyzéseket.
",
+ "maxInactivityTime1": "Ez a beállítás azt határozza meg, hogy az eszközön legfeljebb hány percnyi inaktivitás után lépjen működésbe a PIN-kóddal vagy jelszóval feloldható zárolás. A felhasználók a Beállítások alkalmazásban bármilyen létező, a beállított maximális értéknél rövidebb időkorlátot megadhatnak. Megjegyzés: A Lumia 950 és 950XL készülékeken a maximális időkorlát az ebben a szabályzatban meghatározott értéktől függetlenül 5 perc.",
+ "maxInactivityTime2": "0 (alapértelmezett) – Nincs időkorlát. Az alapértelmezett 0 érték azt jelenti, hogy nincs beállítva időkorlát.",
+ "maxPasswordAttempts1": "A szabályzat másként működik mobileszközökön és asztali számítógépeken.",
+ "maxPasswordAttempts2": "Mobileszközön a szabályzatban meghatározott érték elérésekor a felhasználó eszközéről törlődnek az adatok.",
+ "maxPasswordAttempts3": "Asztali számítógépen a szabályzatban meghatározott érték elérésekor nem törlődnek az adatok, hanem a számítógép BitLocker-alapú helyreállítási módra vált, amelyben az adatok nem érhetők el, de helyreállíthatók. A szabályzat nem hajtható végre, ha nincs engedélyezve a BitLocker.",
+ "maxPasswordAttempts4": "A sikertelen próbálkozások korlátjának elérése előtt a felhasználó a zárolási képernyőre kerül vissza, és a rendszer figyelmezteti, hogy további sikertelen próbálkozások esetén zárolva lesz a számítógép. Ha a felhasználó eléri a korlátot, az eszköz automatikusan újraindul, és a BitLocker-helyreállítás lapja jelenik meg rajta. A lapon a felhasználó megadhatja a BitLocker helyreállítási kulcsát.",
+ "maxPasswordAttempts5": "0 (alapértelmezett) – Az eszközről soha nem törlődnek az adatok helytelen PIN-kód vagy jelszó megadása esetén.",
+ "maxPasswordAttempts6": "Ha a szabályzat minden beállításának értéke 0, a 0 a legbiztonságosabb érték. Minden más esetben a szabályzat szerinti minimális érték a legbiztonságosabb.",
+ "mdmDiscoveryUrl": "Adja meg annak az MDM-es regisztrációs végpontnak az URL-címét, amelyet az MDM-ben regisztráló felhasználók használni fognak. Az Intune-ban ez a beállítás alapértelmezés szerint meg van adva.",
+ "minimumPinLength1": "Az itt megadott egész szám határozza meg, hogy legalább hány karakterből kell állnia a PIN-kódnak. Az alapértelmezett érték a 4. A szabályzatbeállításhoz megadható minimális érték a 4. A legnagyobb megadható érték kisebb, mint a PIN-kód maximális hossza beállításnál megadott szám, vagy mint 127 (amelyik a kettő közül kisebb).",
+ "minimumPinLength2": "Ha konfigurálja ezt a szabályzatbeállítást, a PIN-kód hosszának legalább az itt megadott számot kell elérnie. Ha letiltja vagy nem konfigurálja a szabályzatbeállítást, a PIN-kódnak legalább 4 karakter hosszúnak kell lennie.",
+ "name": "Ennek a hálózathatárnak a neve",
+ "neutralResources": "
Ha a cégnél hitelesítés-átirányítási végpontokat használnak, itt adhatja meg őket. Az itt megadott helyeket a rendszer vagy személyes, vagy céges helyként kezeli a kapcsolat átirányítás előtti környezetétől függően.
Több érték megadásához vesszővel válassza el az egyes bejegyzéseket.
Példa: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Az itt megadott érték határozza meg, hogy használható-e a Vállalati Windows Hello a Windowsba való bejelentkezéshez.",
+ "passportForWork2": "Alapértelmezés szerint a beállítás értéke igaz. Ha a szabályzatbeállítást hamis értékűre állítja, a felhasználó nem építheti ki a Vállalati Windows Hello szolgáltatást, kivéve a Microsoft Entrához csatlakoztatott olyan mobiltelefonokon, amelyeken a kiépítés kötelező.",
+ "pinExpiration": "A szabályzatbeállítás maximális megadható értéke 730, minimális értéke pedig 0. Ha a szabályzatbeállítás értéke 0, a felhasználó PIN-kódja soha nem fog lejárni.",
+ "pinHistory1": "A szabályzatbeállítás maximális megadható értéke 50, minimális értéke pedig 0. Ha a szabályzatbeállítás értéke 0, nem szükséges tárolni a korábbi PIN-kódokat.",
+ "pinHistory2": "A felhasználó aktuális PIN-kódja bekerül a felhasználói fiókhoz társított PIN-kódok közé. A PIN-kódok előzményei a PIN-kód átállításakor elvesznek.",
+ "protectUnderLock": "Alkalmazások tartalmának védelme, amikor az eszköz zárolt állapotban van.",
+ "protectionModeBlock": "
Letiltás: Annak megakadályozása, hogy a céges adatok kikerüljenek a védett alkalmazásokból.
",
+ "protectionModeOff": "
Ki: A felhasználó szabadon áthelyezheti az adatokat a védett alkalmazásokból. Nincs műveletnaplózás.
",
+ "protectionModeOverride": "
Felülbírálások engedélyezése: A rendszer üzenetet jelenít meg a felhasználónak, ha védett alkalmazásból próbál adatokat áthelyezni egy nem védett alkalmazásba. Ha a felhasználó felülbírálja az üzenetet, a műveletet a rendszer naplózza.
",
+ "protectionModeSilent": "
Néma: A felhasználó szabadon áthelyezheti az adatokat a védett alkalmazásokból. Ezeket a műveleteket a rendszer naplózza.
",
+ "required": "Szükséges",
+ "revokeOnMdmHandoff": "Hozzáadva a Windows 10 1703-as verziójában. Ezzel a szabályzattal megadhatja, hogy vissza kell-e vonni a WIP-kulcsokat, ha az eszközt a MAM-ról az MDM-re frissíti. Ha a „Kikapcsolva” értéket állítja be, a kulcsok nem lesznek visszavonva, és a felhasználó a frissítés után továbbra is hozzáfér a védett fájlokhoz. Ezt az értéket javasoljuk megadni, ha az MDM szolgáltatásban a WIP EnterpriseID a MAM szolgáltatással azonos értékre van beállítva.",
+ "revokeOnUnenroll": "Ha a beállítás be van kapcsolva, a titkosítási kulcsok vissza lesznek vonva, ha az eszközt kiveszik a szabályzat hatóköréből.",
+ "rmsTemplateForEdp": "Az RMS-titkosításhoz használandó sablon GUID-ja. Az Azure RMS-sablonnal a rendszergazda részletesen konfigurálhatja, hogy ki és meddig férhet hozzá az RMS-sel védett fájlokhoz.",
+ "showWipIcon": "Ha ez a beállítás be van kapcsolva, a felhasználót egy átfedő ikon értesíti, ha céges környezetben dolgozik.",
+ "useRmsForWip": "Ez a beállítás azt határozza meg, hogy a Windows Információvédelemben engedélyezett-e az Azure RMS-alapú titkosítás használata."
+ },
+ "requireAppPin": "
Az Igen lehetőség kiválasztásával letilthatja az alkalmazás PIN-kódját eszközzárolás egy regisztrált eszközön való észlelésekor.
Megjegyzés: Az Intune iOS vagy iPadOS rendszeren külső EMM-megoldással nem tudja észlelni az eszközregisztrációt.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Egyéni szkript létrehozása",
+ "edit": "Egyéni szkript szerkesztése"
+ },
+ "basicInfo": "Létrehozhat egy új egyéni szkriptcsomagot a saját észlelési és javítási szkriptjeiből.",
+ "customScriptCapitalized": "Egyéni szkript",
+ "customScriptLowercase": "egyéni szkript",
+ "detectionScript": "Észlelési szkript"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Alapértelmezett",
+ "header": "Prioritás frissítése",
+ "postponed": "Elhalasztva",
+ "priority": "Magas prioritás"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Automatikus frissítés",
+ "sublabel": "Ha a felhasználó telepítette a felülírt alkalmazás(oka)t a céges portálról, felülíró alkalmazás(ok) telepítését követelje meg."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Háttér",
+ "displayText": "Tartalom letöltése a következőben: {0}",
+ "foreground": "Előtér",
+ "header": "Szállítás optimalizálásának prioritása"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Az újraindítási értesítés késleltetésének engedélyezése a felhasználó számára",
+ "countdownDialog": "Adja meg, hogy mikor jelenjen meg az újraindítási visszaszámlálás párbeszédpanelje az újraindítás előtt (perc)",
+ "durationInMinutes": "Eszköz újraindításának türelmi ideje (perc)",
+ "snoozeDurationInMinutes": "Adja meg a késleltetési időt (perc)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Időzóna",
+ "local": "Eszköz időzónája",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Dátum és idő",
+ "deadlineTimeColumnLabel": "Telepítési határidő",
+ "deadlineTimeDatePickerErrorMessage": "A kijelölt dátumnak az elérhetőség dátumánál későbbinek kell lennie",
+ "deadlineTimeLabel": "Alkalmazástelepítés határideje",
+ "defaultTime": "Amint lehetséges",
+ "infoText": "Az alkalmazás a telepítés után azonnal elérhető lesz, hacsak nem adja meg alább az elérhetőség időpontját. Ha ez egy szükséges alkalmazás, akkor megadhatja a telepítési határidőt.",
+ "specificTime": "Egy megadott dátum és időpont",
+ "startTimeColumnLabel": "Elérhetőség",
+ "startTimeDatePickerErrorMessage": "A kijelölt dátumnak a határidő dátumánál korábbinak kell lennie",
+ "startTimeLabel": "Alkalmazás rendelkezésre állása"
+ },
+ "restartGracePeriodHeader": "Türelmi időszak újraindítása",
+ "restartGracePeriodLabel": "Eszköz újraindításának türelmi ideje",
+ "summaryTitle": "Végfelhasználói felület"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Rendeljen hozzá egyéni attribútumot legalább egy csoporthoz. A hozzárendelések szerkesztéséhez nyissa meg a Tulajdonságok lapot.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Héjszkript",
"successfullySavedPolicy": "Mentett {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64 bites",
+ "thirtyTwoBit": "32 bites"
+ },
+ "Countries": {
+ "ae": "Egyesült Arab Emírségek",
+ "ag": "Antigua és Barbuda",
+ "ai": "Anguilla",
+ "al": "Albánia",
+ "am": "Örményország",
+ "ao": "Angola",
+ "ar": "Argentína",
+ "at": "Ausztria",
+ "au": "Ausztrália",
+ "az": "Azerbajdzsán",
+ "bb": "Barbados",
+ "be": "Belgium",
+ "bf": "Burkina Faso",
+ "bg": "Bulgária",
+ "bh": "Bahrein",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolívia",
+ "br": "Brazília",
+ "bs": "Bahama-szigetek",
+ "bt": "Bhután",
+ "bw": "Botswana",
+ "by": "Belarusz",
+ "bz": "Belize",
+ "ca": "Kanada",
+ "cg": "Kongói Köztársaság",
+ "ch": "Svájc",
+ "cl": "Chile",
+ "cn": "Kína",
+ "co": "Kolumbia",
+ "cr": "Costa Rica",
+ "cv": "Cabo Verde",
+ "cy": "Ciprus",
+ "cz": "Cseh Köztársaság",
+ "de": "Németország",
+ "dk": "Dánia",
+ "dm": "Dominika",
+ "do": "Dominikai Köztársaság",
+ "dz": "Algéria",
+ "ec": "Ecuador",
+ "ee": "Észtország",
+ "eg": "Egyiptom",
+ "es": "Spanyolország",
+ "fi": "Finnország",
+ "fj": "Fidzsi-szigetek",
+ "fm": "Mikronéziai Szövetséges Államok",
+ "fr": "Franciaország",
+ "gb": "Egyesült Királyság",
+ "gd": "Grenada",
+ "gh": "Ghána",
+ "gm": "Gambia",
+ "gr": "Görögország",
+ "gt": "Guatemala",
+ "gw": "Bissau-Guinea",
+ "gy": "Guyana",
+ "hk": "Hongkong KKT",
+ "hn": "Honduras",
+ "hr": "Horvátország",
+ "hu": "Magyarország",
+ "id": "Indonézia",
+ "ie": "Írország",
+ "il": "Izrael",
+ "in": "India",
+ "is": "Izland",
+ "it": "Olaszország",
+ "jm": "Jamaica",
+ "jo": "Jordánia",
+ "jp": "Japán",
+ "ke": "Kenya",
+ "kg": "Kirgizisztán",
+ "kh": "Kambodzsa",
+ "kn": "Saint Kitts és Nevis",
+ "kr": "Koreai Köztársaság",
+ "kw": "Kuvait",
+ "ky": "Kajmán-szigetek",
+ "kz": "Kazahsztán",
+ "la": "Laoszi Népi Demokratikus köztársaság",
+ "lb": "Libanon",
+ "lc": "Saint Lucia",
+ "lk": "Srí Lanka",
+ "lr": "Libéria",
+ "lt": "Litvánia",
+ "lu": "Luxemburg",
+ "lv": "Lettország",
+ "md": "Moldovai Köztársaság",
+ "mg": "Madagaszkár",
+ "mk": "Észak-Macedónia",
+ "ml": "Mali",
+ "mn": "Mongólia",
+ "mo": "Makao",
+ "mr": "Mauritánia",
+ "ms": "Montserrat",
+ "mt": "Málta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Mexikó",
+ "my": "Malajzia",
+ "mz": "Mozambik",
+ "na": "Namíbia",
+ "ne": "Niger",
+ "ng": "Nigéria",
+ "ni": "Nicaragua",
+ "nl": "Hollandia",
+ "no": "Norvégia",
+ "np": "Nepál",
+ "nz": "Új-Zéland",
+ "om": "Omán",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Pápua Új-Guinea",
+ "ph": "Fülöp-szigetek",
+ "pk": "Pakisztán",
+ "pl": "Lengyelország",
+ "pt": "Portugália",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Katar",
+ "ro": "Románia",
+ "ru": "Oroszország",
+ "sa": "Szaúd-Arábia",
+ "sb": "Salamon-szigetek",
+ "sc": "Seychelle-szigetek",
+ "se": "Svédország",
+ "sg": "Szingapúr",
+ "si": "Szlovénia",
+ "sk": "Szlovákia",
+ "sl": "Sierra Leone",
+ "sn": "Szenegál",
+ "sr": "Suriname",
+ "st": "Sao Tome és Principe",
+ "sv": "Salvador",
+ "sz": "Szváziföld",
+ "tc": "Turks- és Caicos-szigetek",
+ "td": "Csád",
+ "th": "Thaiföld",
+ "tj": "Tádzsikisztán",
+ "tm": "Türkmenisztán",
+ "tn": "Tunézia",
+ "tr": "Törökország",
+ "tt": "Trinidad és Tobago",
+ "tw": "Tajvan",
+ "tz": "Tanzánia",
+ "ua": "Ukrajna",
+ "ug": "Uganda",
+ "us": "Egyesült Államok",
+ "uy": "Uruguay",
+ "uz": "Üzbegisztán",
+ "vc": "Saint Vincent és Grenadine-szigetek",
+ "ve": "Venezuela",
+ "vg": "Brit Virgin-szigetek",
+ "vn": "Vietnam",
+ "ye": "Jemen",
+ "za": "Dél-Afrika",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Ez a beállítás nem konfigurálható az OMA-URI használatával, mert elérhető a beállításkatalógusban. A beállítás konfigurálásához lépjen a beállításkatalógushoz."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Konfigurációsprofil-fájl kiválasztása"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Ezek a beállítások eszközregisztrálási szolgáltatással (felhasználói jóváhagyás mellett vagy nélkül), valamint automatikus eszközregisztrálási szolgáltatással (korábbi nevén DEP) regisztrált eszközökön működnek.",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Eszközök regisztrálása és eszközök automatikus regisztrálása",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Eszközök regisztrálása és eszközök automatikus regisztrálása",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Konfigurálja a Microsoft Launchert a teljes mértékben felügyelt eszközökön.",
+ "deviceExperienceTypeDescription": "A konfigurálni kívánt felület alapján válassza a Teljes képernyős mód vagy a Microsoft Launcher lehetőséget a felhasználói élmény konfigurálásának megkezdéséhez az eszközökön. Ha nem választ eszközélmény-típust, a felhasználók látni fogják az eszköz alapértelmezett kezdőképernyőjét.",
+ "deviceExperienceTypeKioskMode": "Kioszkmód (dedikált és teljes mértékben felügyelt)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "A Microsoft Launcher használatával testreszabhatja a szervezet felügyelt eszközeinek kezdőképernyő-élményét. Ha a Launchert alapértelmezetté teszi, az eszköz felhasználói nem fognak tudni másik indítót használni.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "A Microsoft Launcher beállítása az alapértelmezett indítóként",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (csak teljes mértékben felügyelt)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "A felhasználók addig nem módosíthatják a háttérképet, amíg Ön ezt nem engedélyezi. Ez a beállítás csak akkor érhető el, ha egyéni háttérképet állít be.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Háttérkép módosításának engedélyezése a felhasználó számára",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Ezzel a beállítással a saját képét használhatja a kezdőképernyő háttérképeként, és megadhatja, hogy a felhasználó módosíthatja-e azt. Ha nem állít be egyéni háttérképet, az eszköz megtartja az aktuális háttérképet.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Egyéni háttérkép konfigurálása",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Ez a kép háttérképként jelenik meg az eszköz kezdőképernyőjén. Ez a mező csak akkor érhető el, ha egyéni háttérképet állít be.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "A háttérképként használni kívánt kép URL-címének megadása",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Letiltva",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Elrejtés",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Megjelenítés",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Ha engedélyezi a felhasználó számára a dokk jelenlétének módosítását, a rendszer az előző beállítást kényszeríti a kezdeti üzembe helyezés során. A későbbi üzembe helyezések esetén a beállítás nem lesz kényszerítve, hogy érvénybe léphessenek a felhasználó által esetleg végrehajtott módosítások. Ez a beállítás csak akkor érhető el, ha beállítja a dokk megjelenítését.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Dokkmegjelenítés módosításának engedélyezése a felhasználó számára",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "A dokk egy olyan menü, amely az eszközök felhasználóinak gyors hozzáférést biztosít az alkalmazásokhoz és az eszközökhöz. Ha el van rejtve, a felhasználóknak az eléréséhez felfelé kell pöccinteniük.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock-jelenlét",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Ha engedélyezi a felhasználó számára a hírcsatorna engedélyezését/letiltását, a rendszer az előző beállítást kényszeríti a kezdeti üzembe helyezés során. A későbbi üzembe helyezések esetén a beállítás nem lesz kényszerítve, hogy érvénybe léphessenek a felhasználó által esetleg végrehajtott módosítások. Ez a beállítás csak akkor érhető el, ha engedélyezi az indító hírcsatornáját.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "A hírcsatorna engedélyezésének és letiltásának lehetővé tétele a felhasználó számára",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "A hírcsatorna a kezdőképernyőtől jobbra található kiegészítő képernyő, ahol az eszköz felhasználói hozzáférhetnek a naptárakhoz, a dokumentumokhoz és a legutóbbi tevékenységekhez. Ha nem engedélyezi, letiltott állapotban lesz. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Indító hírcsatornájának engedélyezése",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Keresősáv elhelyezése",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Alul",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Elrejtés",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Felső",
+ "deviceExperienceTypeName": "Eszközzel kapcsolatos szolgáltatások típusa",
"deviceGuardCredentialGuardDescription": "Az Engedélyezés UEFI-zárolással beállítás biztosítja, hogy ne lehessen távolról letiltani a Credential Guard funkciót. Az Engedélyezés UEFI-zárolás nélkül beállítás lehetővé teszi a Credential Guard Csoportházirenddel való távoli letiltását.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune-eszközazonosító",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Annak megadása, hogy az inaktív időszakra ütemezett automatikus újraindításokat hány nap után váltsa fel az aktív időszakban történő újraindítás. Ez felhasználói ütemezést igényel.",
"engagedRestartTransitionScheduleName": "Automatikus újraindítás után a felhasználók térjenek át az aktív időszakban történő újraindításra (nap)",
"enhancedOption": "Bővített (1903 és korábbi)",
- "enrollmentProfileTypeDedicatedDevice": "Dedikált eszköz",
- "enrollmentProfileTypeDescription": "Válasszon egy regisztrációs profiltípust a Microsoft Launcher vagy a Microsoft Managed Home Screen eszközökön való konfigurálásának megkezdéséhez. Ha nem választ profiltípust, a felhasználók az eszköz alapértelmezett kezdőképernyőjét fogják látni.",
- "enrollmentProfileTypeFullyManaged": "Teljes mértékben felügyelt",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Konfigurálja a Microsoft Launchert a teljes mértékben felügyelt eszközökön.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "A Microsoft Launcher használatával testreszabhatja a szervezet felügyelt eszközeinek kezdőképernyő-élményét. Ha a Launchert alapértelmezetté teszi, az eszköz felhasználói nem fognak tudni másik indítót használni.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "A Microsoft Launcher beállítása az alapértelmezett indítóként",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Háttérkép módosításának engedélyezése a felhasználó számára",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Ezzel a beállítással a saját képét használhatja a kezdőképernyő háttérképeként, és megadhatja, hogy a felhasználó módosíthatja-e azt. Ha nem állít be egyéni háttérképet, az eszköz megtartja az aktuális háttérképet.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Egyéni háttérkép konfigurálása",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Ez a kép háttérképként jelenik meg az eszköz kezdőképernyőjén. Ez a mező csak akkor érhető el, ha egyéni háttérképet állít be.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "A háttérképként használni kívánt kép URL-címének megadása",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Letiltva",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Elrejtés",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Megjelenítés",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "A dokk egy olyan menü, amely az eszközök felhasználóinak gyors hozzáférést biztosít az alkalmazásokhoz és az eszközökhöz. Ha el van rejtve, a felhasználóknak az eléréséhez felfelé kell pöccinteniük.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dokkmegjelenítés",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "A hírcsatorna engedélyezésének és letiltásának lehetővé tétele a felhasználó számára",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "A hírcsatorna a kezdőképernyőtől jobbra található kiegészítő képernyő, ahol az eszköz felhasználói hozzáférhetnek a naptárakhoz, a dokumentumokhoz és a legutóbbi tevékenységekhez. Ha nem engedélyezi, letiltott állapotban lesz. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Indító hírcsatornájának engedélyezése",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Keresősáv elhelyezése",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Alul",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Elrejtés",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Felül",
- "enrollmentProfileTypeName": "Regisztrációs profiltípus",
"enrollmentSettingsHeading": "Beléptetési beállítások",
"enterOnlyOneForDns": "Adja meg a DNS-kiszolgáló-listát és/vagy a proxykiszolgálót.",
"enterpriseModeLoggingExample": "például http://DC1/naplo.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Teljes mértékben felügyelt vállalati tulajdonban lévő, munkahelyi profillal rendelkező eszközök",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Ezek a beállítások csak a teljes mértékben felügyelt és dedikált eszközökön működnek.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Teljes mértékben felügyelt és dedikált eszközök",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Ezek a beállítások csak a teljes körűen felügyelt és dedikált, kioszkszabályzattal működő eszközökön működnek.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Teljes mértékben felügyelt és dedikált eszközök (csak teljes képernyős módban)",
"gameCenterBlockedMacDescription": "Az Igen lehetőség választásával letiltja a Game Centert, és a rendszer eltávolítja a Game Center ikont a kezdőképernyőről. A beállítás a macOS 10.13 vagy újabb verzióit futtató eszközökhöz érhető el.",
"gameCenterBlockedMacName": "Game Center letiltása",
"gamingPageDescription": "Játékok elérésének blokkolása a Gépház alkalmazásban.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "A kioszkmódú eszközön lévő alkalmazások eléréséhez használt bejelentkezési típust konfigurálja.",
"kioskShowTaskbarDesc": "A Windows tálca megjelenítése vagy elrejtése a kioszkon.",
"kioskShowTaskbarName": "Windows tálca",
+ "kioskSingleInfoBoxText": "Egyalkalmazásos teljes képernyős mód – zárolja az eszközt a kiválasztott alkalmazás futtatásához. Ennek a módnak a használatához először jóvá kell hagynia és hozzá kell rendelnie a kiválasztott alkalmazást az ügyfélalkalmazások közül. A teljes körűen felügyelt eszközökön az egyetlen kiválasztott alkalmazás a Felügyelt kezdőképernyő. A rendszer az összes többi alkalmazást kötelező alkalmazásként kezeli ehelyett.",
"kioskStartDateTime": "Karbantartási időszak kezdési ideje",
"kioskStartMenuLayoutXmlDesc": "Azon XML-elrendezés megadása, amely meghatározza, hogy milyen sorrendben jelenjenek meg az alkalmazások a Start menüben",
"kioskStartMenuLayoutXmlDescV2": "XML-fájl importálása a Start menü elrendezésének konfigurálására, felülírva a meglévő megjelenítési sorrendet és csempeméretet. További információ",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Érvényes fájlelérési útnak kell lennie",
"mustBeAValidHttpsUrl": "Érvényes HTTPS URL-címnek kell lennie",
"mustBeAValidIPAddress": "Érvényes IP-címet kell megadni (példa: 192.168.0.1 vagy 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Az értéknek érvényes IP-címnek vagy nem kötelező portszámmal rendelkező teljes tartománynévnek kell lennie.",
"mustBeAValidIPv4Address": "Érvényes IPv4-címnek kell lennie (például: 192.168.0.1)",
"mustBeAValidIPv6Address": "Érvényes IPv6-címet kell megadni (példa: 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "A kép érvényes URL-címének kell lennie, például www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Windows-tűzfalszabályok a helyi tárolóban (Nyilvános hálózatok)",
"publicNetworkName": "Nyilvános (nem észlelhető) hálózat",
"publicOutboundConnectionsSummaryLabel": "Alapértelmezett művelet a kimenő kapcsolatok esetén (nyilvános hálózatok)",
- "publicPlayStoreEnabledDescription": "A felhasználók az összes alkalmazáshoz hozzáférhetnek, kivéve azokhoz, amelyek eltávolítását kérte az Ügyfélalkalmazásokban. Ha a „Nincs konfigurálva” lehetőséget választja ehhez a beállításhoz, akkor a felhasználók csak azokat az alkalmazásokat érhetik el, amelyeket Ön az Ügyfélalkalmazásokban elérhetőként vagy kötelezőként jelölt meg.",
+ "publicPlayStoreEnabledDescription": "Ha az „Engedélyezés” lehetőséget választja, a felhasználók az összes alkalmazáshoz hozzáférhetnek, kivéve azokhoz, amelyek eltávolítását kérte az Ügyfélalkalmazásokban. Ha a „Letiltás” vagy „Nincs konfigurálva” lehetőséget választja ehhez a beállításhoz, akkor a felhasználók csak azokat az alkalmazásokat érhetik el, amelyeket Ön az Ügyfélalkalmazásokban elérhetőként vagy kötelezőként jelölt meg.",
"publicPlayStoreEnabledName": "Hozzáférés engedélyezése minden alkalmazáshoz a Google Play Áruházban",
- "publicPlayStoreEnabledWarning": "Ha az Engedélyezés lehetőséget választja, a felhasználók bármilyen alkalmazást telepíthetnek a Google Play Áruházból. Ha később „Nincs konfigurálva\" értékre módosítja a beállítást, az összes olyan alkalmazás, amely a felhasználó számára nincs kifejezetten engedélyezve, el lesz távolítva az eszközről.",
+ "publicPlayStoreEnabledWarning": "Ha az „Engedélyezés” lehetőséget választja, a felhasználók bármilyen alkalmazást telepíthetnek a Google Play Áruházból. Ha később „Letiltva” vagy „Nincs konfigurálva” értékre módosítja a beállítást, az összes alkalmazás el lesz távolítva az eszközről, kivéve az ügyfélalkalmazásokban elérhetőként vagy kötelezőként felsorolt alkalmazásokat.",
+ "publicPlayStoreSelectionAllowList": "Letiltás",
+ "publicPlayStoreSelectionBlockList": "Engedélyezés",
+ "publicPlayStoreSelectionNotConfigured": "Nincs konfigurálva",
"publicShieldedSummaryLabel": "Védett (nyilvános hálózatok)",
"publicStealthModeSummaryLabel": "Rejtett üzemmód (nyilvános hálózatok)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Egyedi küldésű válaszok a csoportos küldésű szórásokra (nyilvános hálózatok)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Törlés...",
"photoLibrary": "Fotókönyvtár",
"pinCharSettingTooltip": "A numerikus PIN-kód csak numerikus karaktereket tartalmazhat. \r\n \r\nA PIN-kódnak a következők mindegyikét tartalmaznia kell: alfanumerikus karakterek és engedélyezett szimbólumok.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Fontos: 2024. június 1-jén a 17.7.0-s verziónál régebbi SDK-val rendelkező alkalmazások nem kapnak többé alkalmazásvédelmi szabályzatfrissítéseket, és a felhasználók nem indíthatják el az alkalmazást. Győződjön meg arról, hogy a felhasználók frissítik az alkalmazásaikat, és az üzletági alkalmazások friss SDK-t vagy burkolót használnak. További információ",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Platform",
"platformDropDownLabel": "Platform",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Eszköz",
"licenseTypeUser": "Felhasználó"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Tulajdonság",
- "rule": "Szabály",
- "ruleDetails": "Szabály részletei",
- "value": "Érték"
- },
- "assignIf": "Profil hozzárendelése, ha",
- "deleteWarning": "Ezzel törli a kiválasztott alkalmazhatósági szabályt",
- "dontAssignIf": "Ne rendeljen hozzá profilt, ha",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "és további {0}",
- "instructions": "Adja meg, hogyan kívánja alkalmazni ezt a profilt egy hozzárendelt csoporton belül. Az Intune csak azokra az eszközökre alkalmazz a profilt, amelyek megfelnek ezen szabályok kombinált feltételeinek.",
- "maxText": "Maximum",
- "minText": "Minimum",
- "noActionRow": "Nincs megadva alkalmazhatósági szabály",
- "oSVersion": "például: 1.2.3.4",
- "toText": "–",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home egynyelvű",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core – kereskedelmi",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "Operációs rendszer kiadása",
- "windows10OsVersion": "Operációs rendszer verziója",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Egyenlő",
- "greaterThan": "Nagyobb, mint",
- "greaterThanOrEqualTo": "nagyobb vagy egyenlő",
- "lessThan": "Kevesebb, mint",
- "lessThanOrEqualTo": "kisebb vagy egyenlő",
- "notEqualTo": "Nem egyenlő"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Szkriptaláírás ellenőrzésének kényszerítése és a szkript csendes futtatása",
- "enforceSignatureCheckTooltip": "Válassza az Igen lehetőséget annak ellenőrzéséhez, hogy a szkriptet egy megbízható kiadó írta alá, ami lehetővé teszi, hogy a szkript figyelmeztetések és megerősítés kérése nélkül fusson. A szkript letiltás nélkül fog futni. Válassza a Nem (alapértelmezett) lehetőséget, ha a szkriptet végfelhasználói megerősítéssel szeretné futtatni az aláírás ellenőrzése nélkül.",
- "header": "Egyéni észlelési szkript használata",
- "runAs32Bit": "Szkript futtatása 32 bites folyamatként 64 bites ügyfeleken",
- "runAs32BitTooltip": "Válassza az Igen lehetőséget a szkript 32 bites folyamatban való futtatásához 64 bites ügyfeleken. Válassza a Nem (alapértelmezett) lehetőséget, ha a szkriptet 64 bites folyamatban szeretné futtatni 64 bites ügyfeleken. A szkriptet a 32 bites ügyfelek 32 bites folyamatban futtatják.",
- "scriptContent": "Szkript tartalma",
- "scriptFile": "Parancsfájl",
- "scriptFileNotSelectedValidation": "Nincs kijelölve szkriptfájl.",
- "scriptFileTooltip": "Válasszon ki egy PowerShell-szkriptet, amely észleli az alkalmazás jelenlétét az ügyfélen. Az alkalmazás észlelése akkor történik meg, ha a szkript 0 értékű kilépési kódot ad vissza, és sztringértéket ír az STDOUT kimenetbe.",
- "scriptSizeLimitValidation": "Az észlelési szkript meghaladja a megengedett maximális méretet. A probléma megoldásához csökkentse az észlelési szkript méretét."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Létrehozás dátuma",
- "dateModified": "Módosítás dátuma",
- "doesNotExist": "A megadott fájl vagy mappa nem létezik.",
- "fileOrFolderExists": "A fájl vagy mappa létezik",
- "sizeInMB": "Méret (MB)",
- "version": "Sztring (verzió)"
- },
- "associatedWith32Bit": "64 bites ügyfeleken egy 32 bites alkalmazással társított",
- "associatedWith32BitTooltip": "Válassza az Igen lehetőséget az elérési út környezeti változóinak 32 bites környezetben való kibontásához 64 bites ügyfeleken. Válassza a Nem (alapértelmezett) lehetőséget, ha az elérési út változóit 64 bites környezetben szeretné kibontani 64 bites ügyfeleken. A 32 bites ügyfelek mindig a 32 bites környezetet fogják használni.",
- "detectionMethod": "Észlelési módszer",
- "detectionMethodTooltip": "Válassza ki az alkalmazás jelenlétének érvényesítésére használt észlelési módszer típusát.",
- "fileOrFolder": "Fájl vagy mappa",
- "fileOrFolderToolTip": "A felderítendő fájl vagy mappa.",
- "operator": "Operátor",
- "operatorTooltip": "Válassza ki az operátort az összehasonlítás érvényesítéséhez használt észlelési módszerhez.",
- "path": "Elérési út",
- "pathTooltip": "A felderítendő fájlt vagy mappát tartalmazó mappa teljes elérési útja.",
- "value": "Érték",
- "valueTooltip": "Válasszon egy olyan értéket, amely megfelel a választott észlelési módszernek. A dátumészlelési módszereket helyi időben kell megadni."
- },
- "GridColumns": {
- "pathOrCode": "Elérési út/kód",
- "type": "Típus"
- },
- "MsiRule": {
- "operator": "Operátor",
- "operatorTooltip": "Válassza ki az operátort az MSI-termékverzió érvényesítésének összehasonlításához.",
- "productCode": "MSI-termékkód",
- "productCodeTooltip": "Egy érvényes MSI-termékkód az alkalmazáshoz.",
- "productVersion": "Érték",
- "productVersionCheck": "MSI-termékverzió ellenőrzése",
- "productVersionCheckTooltip": "Válassza az Igen lehetőséget, ha az MSI-termékkód mellett az MSI-termékverziót is ellenőrizni szeretné.",
- "productVersionTooltip": "Az MSI termékverziójának megadása az alkalmazáshoz."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Egész szám összehasonlítása",
- "keyDoesNotExist": "A kulcs nem létezik",
- "keyExists": "A kulcs létezik",
- "stringComparison": "Sztringek összehasonlítása",
- "valueDoesNotExist": "Az érték nem létezik",
- "valueExists": "Az érték már létezik",
- "versionComparison": "Verziók összehasonlítása"
- },
- "associatedWith32Bit": "64 bites ügyfeleken egy 32 bites alkalmazással társított",
- "associatedWith32BitTooltip": "Válassza az Igen lehetőséget a 32 bites regisztrációs adatbázisban való kereséshez 64 bites ügyfeleken. Válassza a Nem (alapértelmezett) lehetőséget, ha a 64 bites regisztrációs adatbázisban szeretne keresni 64 bites ügyfeleken. A 32 bites ügyfelek mindig a 32 bites regisztrációs adatbázisban keresnek.",
- "detectionMethod": "Észlelési módszer",
- "detectionMethodTooltip": "Válassza ki az alkalmazás jelenlétének érvényesítésére használt észlelési módszer típusát.",
- "keyPath": "Kulcs elérési útja",
- "keyPathTooltip": "A felderítendő értéket tartalmazó beállításjegyzékbeli bejegyzés teljes elérési útja.",
- "operator": "Operátor",
- "operatorTooltip": "Válassza ki az operátort az összehasonlítás érvényesítéséhez használt észlelési módszerhez.",
- "value": "Érték",
- "valueName": "Azonosítónév",
- "valueNameTooltip": "Az észlelendő beállításazonosító neve.",
- "valueTooltip": "Válasszon egy értéket, amely megfelel a kijelölt észlelési módszernek."
- },
- "RuleTypeOptions": {
- "file": "Fájl",
- "mSI": "MSI",
- "registry": "Beállításjegyzék"
- },
- "gridAriaLabel": "Észlelési szabályok",
- "header": "Egy, az alkalmazás jelenlétét jelző szabály létrehozása.",
- "noRulesSelectedPlaceholder": "Nincs megadva szabály.",
- "ruleTableLimit": "Legfeljebb 25 észlelési szabályt vehet fel",
- "ruleType": "Szabálytípus",
- "ruleTypeTooltip": "Válassza ki a hozzáadni kívánt észlelési szabály típusát."
- },
- "RuleConfigurationOptions": {
- "customScript": "Egyéni észlelési szkript használata",
- "manual": "Észlelési szabályok manuális konfigurálása"
- },
- "bladeTitle": "Észlelési szabályok",
- "header": "Az alkalmazás észlelésére használt, az alkalmazásra vonatkozó szabályok konfigurálása.",
- "rulesFormat": "Szabályok formátuma",
- "rulesFormatTooltip": "Választhat, hogy manuálisan konfigurálja az észlelési szabályokat, vagy egyéni szkriptet használ az alkalmazás jelenlétének észlelésére.",
- "selectorLabel": "Észlelési szabályok"
+ "BooleanActions": {
+ "allow": "Engedélyezés",
+ "block": "Tiltás",
+ "configured": "Konfigurálva",
+ "disable": "Letiltás",
+ "dontRequire": "Nem kötelező",
+ "enable": "Engedélyezés",
+ "hide": "Elrejtés",
+ "limit": "Korlát",
+ "notConfigured": "Nincs beállítva",
+ "require": "Kötelező",
+ "show": "Megjelenítés",
+ "yes": "Igen"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge alkalmazás által ajánlott SmartScreen-beállítások: Windows 10 a felhőkonfigurációs sablonban. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Végpontészlelés és -válasz"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "Alkalmazás- és böngészőelkülönítés",
- "aSRApplicationControl": "Alkalmazásvezérlés",
- "aSRAttackSurfaceReduction": "A támadási felület csökkentésére szolgáló szabályok",
- "aSRDeviceControl": "Eszközvezérlés",
- "aSRExploitProtection": "Biztonsági rés kiaknázása elleni védelem",
- "aSRWebProtection": "Webes védelem (Microsoft Edge régi verziója)",
- "aVExclusions": "Microsoft Defender víruskereső – kizárások",
- "antivirus": "Microsoft Defender víruskereső",
- "cloudPC": "Windows 365 – biztonsági alapkonfiguráció",
- "default": "Végpontbiztonság",
- "defenderTest": "Microsoft Defender végponthoz – bemutató",
- "diskEncryption": "BitLocker",
- "eDR": "Végpontészlelés és -válasz",
- "edgeSecurityBaseline": "Microsoft Edge-alapértékek",
- "edgeSecurityBaselinePreview": "Előzetes verzió: Microsoft Edge-alapértékek",
- "editionUpgradeConfiguration": "Kiadásfrissítés és módváltás",
- "firewall": "Windows tűzfal",
- "firewallRules": "Windows tűzfalszabályok",
- "identityProtection": "Fiókvédelem",
- "identityProtectionPreview": "Fiókvédelem (előzetes verzió)",
- "mDMSecurityBaseline1810": "MDM biztonsági alapkonfiguráció Windows 10-es és újabb rendszerekhez 2018 október",
- "mDMSecurityBaseline1810Preview": "Előzetes verzió: MDM biztonsági alapkonfiguráció Windows 10-es és újabb rendszerekhez 2018 október",
- "mDMSecurityBaseline1810PreviewBeta": "Előzetes verzió: MDM biztonsági alapkonfiguráció Windows 10-es rendszerhez 2018 október (bétaverzió)",
- "mDMSecurityBaseline1906": "MDM biztonsági alapkonfiguráció Windows 10-es és újabb rendszerekhez 2019 május",
- "mDMSecurityBaseline2004": "MDM biztonsági alapkonfiguráció Windows 10-es és újabb rendszerekhez 2020 augusztus",
- "mDMSecurityBaseline2101": "MDM biztonsági alapkonfiguráció Windows 10 és újabb rendszerekhez – 2020. december",
- "macOSAntivirus": "Vírusvédelem",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS-tűzfal",
- "microsoftDefenderBaseline": "Microsoft Defender végponthoz – alapkonfiguráció",
- "office365Baseline": "Microsoft Office O365-alapkonfiguráció",
- "office365BaselinePreview": "Előzetes verzió: Microsoft Office O365 alapkonfiguráció",
- "securityBaselines": "Biztonsági alapkonfigurációk",
- "test": "Tesztsablon",
- "testFirewallRulesSecurityTemplateName": "Windows tűzfalszabályok (teszt)",
- "testIdentityProtectionSecurityTemplateName": "Fiókvédelem (teszt)",
- "windowsSecurityExperience": "A Windows Biztonság felhasználói élménye"
- },
- "Firewall": {
- "mDE": "Windows tűzfal"
- },
- "FirewallRules": {
- "mDE": "Windows tűzfalszabályok"
- },
- "OneDriveKnownFolderMove": {
- "description": "A OneDrive ismert mappaáthelyezési beállításai: Windows 10 a felhőkonfigurációs sablonban. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Fiókvédelem",
- "administrativeTemplates": "Felügyeleti sablonok",
- "androidCompliancePolicy": "Androidos megfelelőségi szabályzat",
- "aospDeviceOwnerCompliancePolicy": "Androidos (AOSP) megfelelőségi szabályzat",
- "applicationControl": "App Control for Business",
- "attackSurfaceReductionRules": "Támadási felület csökkentésére szolgáló szabályok",
- "bitlocker": "BitLocker",
- "custom": "Egyéni",
- "deliveryOptimization": "Kézbesítésoptimalizálás",
- "derivedPersonalIdentityVerificationCredential": "Származtatott hitelesítő adat",
- "deviceControl": "Eszközvezérlés",
- "deviceFeatures": "Eszközfunkciók",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Eszközzárolás",
- "deviceOwner": "Teljes mértékben felügyelt, dedikált, vállalati tulajdonban lévő munkahelyi profil",
- "deviceRestrictions": "Eszközkorlátozások",
- "deviceRestrictionsWindows10Team": "Eszközkorlátozások (Windows 10 Team)",
- "domainJoinPreview": "Csatlakozás tartományhoz",
- "editionUpgradeAndModeSwitch": "Kiadásfrissítés és módváltás",
- "education": "Oktatás",
- "email": "E-mail",
- "emailSamsungKnoxOnly": "E-mail (csak Samsung KNOX)",
- "endpointProtection": "Endpoint Protection",
- "expeditedCheckin": "Mobileszköz-kezelés konfigurációja",
- "exploitProtection": "Biztonsági rés kiaknázása elleni védelem",
- "extensions": "Bővítmények",
- "hardwareConfigurations": "BIOS-konfigurációk és egyéb beállítások",
- "identityProtection": "Identitásvédelem",
- "iosCompliancePolicy": "iOS-es megfelelőségi szabályzat",
- "kiosk": "Kioszkmód",
- "localUsersAndGroups": "Felhasználói csoporttagság szerkesztése",
- "macCompliancePolicy": "Mac-es megfelelőségi szabályzat",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Nagyvállalati Microsoft 365-alkalmazások biztonsági alapja",
- "microsoftDefenderAntivirus": "Microsoft Defender víruskereső",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender víruskereső – kizárások",
- "microsoftDefenderAtpWindows10Desktop": "Végponthoz készült Microsoft Defender (Windows 10-es vagy újabb operációs rendszert futtató asztali eszközökhöz)",
- "microsoftDefenderFirewallRules": "Windows tűzfalszabályok",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Biztonsági alap a Microsoft Edge-hez",
- "mxProfileZebraOnly": "MX-profil (csak Zebra)",
- "networkBoundary": "Hálózathatár",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Csoportházirend felülbírálása",
- "pkcsCertificate": "PKCS-tanúsítvány",
- "pkcsImportedCertificate": "Importált PKCS-tanúsítvány",
- "preferenceFile": "Preferenciafájl",
- "presets": "Előzetes beállítások",
- "scepCertificate": "SCEP-tanúsítvány",
- "secureAssessmentEducation": "Biztonságos értékelés (Azure for Education)",
- "securityBaselineForHololens2Advanced": "A HoloLens 2 speciális biztonsági alapkonfigurációja",
- "securityBaselineForHololens2Standard": "A HoloLens 2 standard biztonsági alapkonfigurációja",
- "securityBaselineForMicrosoftEdge": "Biztonsági alap a Microsoft Edge-hez",
- "settingsCatalog": "Beállításkatalógus",
- "sharedMultiUserDevice": "Megosztott többfelhasználós eszköz",
- "softwareUpdates": "Szoftverfrissítések",
- "trustedCertificate": "Megbízható tanúsítvány",
- "unknown": "Ismeretlen",
- "unsupported": "Nem támogatott",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi importálás",
- "windows10CompliancePolicy": "Windows 10/11-es megfelelőségi házirend",
- "windows10MobileCompliancePolicy": "Windows 10 Mobile-os megfelelőségi szabályzat",
- "windows10XScep": "SCEP-tanúsítvány – TESZT",
- "windows10XTrustedCertificate": "Megbízható tanúsítvány – TESZT",
- "windows10XVPN": "VPN – TESZT",
- "windows10XWifi": "WI-FI – TESZT",
- "windows11SecurityBaseline": "Biztonsági alapkonfiguráció Windows 10 és újabb rendszerekhez",
- "windows365SecurityBaseline": "Windows 365 – biztonsági alapkonfiguráció",
- "windows8CompliancePolicy": "Windows 8-as megfelelőségi szabályzat",
- "windowsHealthMonitoring": "Windows-állapotmonitorozás",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Windows Phone-os megfelelőségi szabályzat",
- "windowsUpdateforBusiness": "Windows Update Vállalatoknak",
- "wiredNetwork": "Vezetékes hálózat",
- "workProfile": "Személyes tulajdonban lévő munkahelyi profil"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "A frissítés fokozatosan legyen elérhető",
- "immediateStart": "A frissítés a lehető leghamarabb legyen elérhető",
- "startDateOnly": "A frissítés egy adott dátumtól legyen elérhető"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Felügyelt eszközök",
- "devicesWithoutEnrollment": "Felügyelt alkalmazások"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Szűrő",
- "assignmentFilterTypeColumnHeader": "Szűrési mód",
- "assignmentToast": "Végfelhasználói értesítések",
- "assignmentTypeTableHeader": "HOZZÁRENDELÉS TÍPUSA",
- "autoUpdate": "Automatikus frissítés",
- "deadlineTimeColumnLabel": "Telepítési határidő",
- "deliveryOptimizationPriorityHeader": "Szállítás optimalizálásának prioritása",
- "groupTableHeader": "Csoport",
- "installContextLabel": "Környezet telepítése",
- "isRemovable": "Telepítés cserélhetőként",
- "licenseTypeLabel": "Engedély típusa",
- "modeTableHeader": "Csoport mód",
- "policySet": "Szabályzatkészlet",
- "preventAutoAppUpdate": "Automatikus alkalmazásfrissítések megakadályozása",
- "preventManagedAppBackup": "Az iCloud-alkalmazások biztonsági mentésének megakadályozása",
- "restartGracePeriodHeader": "Türelmi időszak újraindítása",
- "startTimeColumnLabel": "Rendelkezésre állás",
- "tracks": "Nyomkövetések",
- "uninstallOnRemoval": "Eltávolítás az eszköz törlésekor",
- "updateMode": "Prioritás frissítése",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD-webalkalmazás",
- "androidEnterpriseSystemApp": "Android Enterprise-rendszeralkalmazás",
- "androidForWorkApp": "Felügyelt Google Play Áruházbeli alkalmazás",
- "androidLobApp": "Üzletági Android-alkalmazás",
- "androidStoreApp": "Android Áruházbeli alkalmazás",
- "builtInAndroid": "Beépített Android-alkalmazás",
- "builtInApp": "Beépített alkalmazás",
- "builtInIos": "Beépített iOS-alkalmazás",
- "iosIPadOSWebClip": "iOS/iPadOS-webklip",
- "iosLobApp": "Üzletági iOS-alkalmazás",
- "iosStoreApp": "iOS Store-alkalmazás",
- "iosVppApp": "Volume Purchase Program-alkalmazás iOS rendszerhez",
- "lineOfBusinessApp": "Üzletági alkalmazás",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Üzletági macOS-alkalmazás",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office programcsomag",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS-webklip",
- "macOsVppApp": "Volume Purchase Program-alkalmazás macOS rendszerhez",
- "managedAndroidLobApp": "Felügyelt üzletági Android-alkalmazás",
- "managedAndroidStoreApp": "Felügyelt Android Áruházbeli alkalmazás",
- "managedGooglePlayApp": "Felügyelt Google Play Áruházbeli alkalmazás",
- "managedGooglePlayPrivateApp": "Felügyelt privát Google Play-alkalmazás",
- "managedGooglePlayWebApp": "Felügyelt Google Play-webhivatkozás",
- "managedIosLobApp": "Felügyelt üzletági iOS-alkalmazás",
- "managedIosStoreApp": "Felügyelt iOS Store-alkalmazás",
- "microsoftStoreForBusinessApp": "A „Microsoft Store Vállalatoknak” egy alkalmazása",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store Vállalatoknak",
- "officeAddIn": "Office-bővítmény",
- "officeSuiteApp": "Microsoft 365-alkalmazások (Windows 10 és újabb)",
- "sharePointApp": "SharePoint-app",
- "teamsApp": "Teams alkalmazás",
- "webApp": "Webhivatkozás",
- "win32CatalogApp": "Windows katalógusalkalmazás (Win32)",
- "winGetPublicApp": "Windows-csomagkezelő közösségi adattár",
- "winGetStoreApp": "Microsoft Store-alkalmazás (új)",
- "windowsAppXLobApp": "AppX-alapú üzletági Windows-alkalmazás",
- "windowsClassicApp": "Windows-alkalmazás (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 és újabb)",
- "windowsMobileMsiLobApp": "MSI-alapú üzletági Windows-alkalmazás",
- "windowsPhone81AppXBundleLobApp": "AppX-alapú üzletági Windows Phone 8.1-alkalmazás",
- "windowsPhone81AppXLobApp": "AppX-alapú üzletági Windows Phone 8.1-alkalmazás",
- "windowsPhone81StoreApp": "Windows Phone 8.1 Áruházbeli alkalmazás",
- "windowsPhoneXapLobApp": "XAP-alapú üzletági Windows Phone-alkalmazás",
- "windowsStoreApp": "Microsoft Store-alkalmazás (örökölt)",
- "windowsUniversalAppXLobApp": "Univerzális AppX-alapú üzletági Windows-alkalmazás",
- "windowsUniversalLobApp": "Univerzális üzletági Windows-alkalmazás",
- "windowsWebApp": "Windows webes hivatkozás"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Kizárva",
- "include": "Belefoglalva",
- "includeAllDevicesVirtualGroup": "Belefoglalva",
- "includeAllUsersVirtualGroup": "Belefoglalva"
- },
- "AssignmentToast": {
- "hideAll": "Az összes bejelentési értesítés elrejtése",
- "showAll": "Az összes bejelentési értesítés megjelenítése",
- "showReboot": "A számítógép-újraindításokra vonatkozó bejelentési értesítések megjelenítése"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Igen",
- "notConfigured": "Nem"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Háttér",
- "displayText": "Tartalom letöltése a következőben: {0}",
- "foreground": "Előtér",
- "header": "Szállítás optimalizálásának prioritása"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "Az alkalmazás telepítése kényszerítheti az eszköz újraindítását",
- "basedOnReturnCode": "Viselkedés meghatározása a visszatérési kódok alapján",
- "force": "Az Intune az eszköz kötelező újraindítását kezdeményezi",
- "suppress": "Nincs megadott művelet"
- },
- "FilterType": {
- "exclude": "Kizárás",
- "include": "Belefoglalás",
- "none": "Nincs"
- },
- "InstallIntent": {
- "available": "Regisztrált eszközök esetében elérhető",
- "availableWithoutEnrollment": "Regisztrációval vagy anélkül is elérhető",
- "notApplicable": "Nem alkalmazható",
- "required": "Kötelező",
- "uninstall": "Eltávolítás"
- },
- "SettingType": {
- "assignmentType": "Hozzárendelés típusa",
- "deviceLicensing": "Engedély típusa",
- "installContext": "Eltávolítás az eszköz törlésekor",
- "toastSettings": "Végfelhasználói értesítések",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Alapértelmezett",
- "postponed": "Elhalasztva",
- "priority": "Magas prioritás"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Eszközök konfigurálása a kezdeti kiépítéshez.",
- "title": "Eszköz-előkészítés"
- },
- "EnrollmentSettings": {
- "description": "Konfigurálhatja a regisztrációs beállításokat, például letilthatja a regisztrációt, és hozzárendelheti őket a felhasználókhoz.",
- "title": "Regisztrációs beállítások"
- },
- "OSConfiguration": {
- "menuDescription": "Konfigurálja azokat a beállításokat, amelyekkel a felhasználók helyreállíthatják a Windows rendszert egy rendszerindításra alkalmas USB flash-meghajtóról.",
- "menuTitle": "Windows operációs rendszer helyreállítási konfigurációja"
- },
- "coManagementAuthorityDesc": "Configuration Manager-integráció közös felügyeleti beállításainak konfigurálása",
- "coManagementAuthorityTitle": "Közös felügyeleti beállítások ",
- "deploymentProfiles": "Windows AutoPilot Deployment-profilok",
- "description": "További információ arról a hét módszerről, amellyel a felhasználók és a rendszergazdák regisztrálhatják a Windows 10/11-es PC-ket az Intune-ban.",
- "descriptionLabel": "Windows-regisztrációs módszerek",
- "enrollmentStatusPage": "Regisztráció állapotát jelző lap"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Az összes ajánlott illesztőprogram-frissítés automatikus jóváhagyása",
- "manual": "Illesztőprogram-frissítések manuális jóváhagyása és üzembe helyezése"
- },
- "BulkActions": {
- "button": "Tömeges műveletek"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Jóváhagyási módszer:"
- },
- "DeploymentDeferralInDays": {
- "label": "Frissítések elérhetővé tétele a következő után:",
- "units": "(nap)",
- "value": "{0} nap"
- },
- "DriverAction": {
- "header": "Válasszon műveletet az alábbiak közül.",
- "label": "Illesztőprogram-művelet",
- "placeholder": "Válasszon műveletet"
- },
- "IncludedDrivers": {
- "label": "Belefoglalt illesztőprogramok"
- },
- "SelectDrivers": {
- "header": "Válassza ki a tömeges műveletbe belefoglalni kívánt illesztőprogramokat"
- },
- "SelectDriversToInclude": {
- "button": "Válassza ki a belefoglalandó illesztőprogramokat"
- },
- "SelectLessDrivers": {
- "validation": "Legfeljebb száz illesztőprogramot lehet kiválasztani"
- },
- "SelectMoreDrivers": {
- "validation": "Legalább egy illesztőprogramot ki kell jelölni"
- },
- "SelectedDrivers": {
- "label": "Kiválasztott illesztőprogramok"
- },
- "availabilityDate": "Elérhetővé tétel a Windows Update webhelyen",
- "bladeTitle": "Illesztőprogram-frissítések Windows 10-es és újabb verziókhoz (előzetes verzió)",
- "lastSync": "Legutóbbi szinkronizálás:",
- "lastSyncDefaultText": "A kezdeti készlet összegyűjtése függőben",
- "loadError": "A betöltés sikertelen!"
- },
- "DriverStatus": {
- "approved": "Jóváhagyva",
- "declined": "Elutasítva",
- "export": "Ajánlott illesztőprogramok exportálása",
- "needsReview": "Felülvizsgálatot igényel",
- "paused": "Felfüggesztve"
- },
- "DriversToReview": {
- "text": "{0} felülvizsgálandó"
- },
- "Subtitle": {
- "automatic": "Automatikus jóváhagyásos illesztőprogram-frissítési házirend",
- "manual": "Manuális jóváhagyásos illesztőprogram-frissítési házirend"
- },
- "SyncNotification": {
- "failure": "{0} szinkronizálása nem sikerült.",
- "failureDescription": "Hiba történt, és nem sikerült befejezni a kért szinkronizálást. Próbálja meg újra.",
- "pending": "{0} szinkronizálása folyamatban",
- "pendingDescription": "A legutóbbi adatok beolvasása folyamatban van. Ez a folyamat több percet is igénybe vehet.",
- "success": "{0} szinkronizálás befejeződött",
- "successDescription": "A WUfB szolgáltatással való szinkronizálás befejeződött: {0}"
- },
- "SyncSpinner": {
- "text": "Folyamatban van egy szinkronizálás. Ez több percet is igénybe vehet. Figyelje a riasztást, vagy térjen vissza néhány perc múlva."
- },
- "TabName": {
- "basics": "Alapadatok",
- "driverUpdateSettings": "Beállítások",
- "otherDrivers": "Egyéb illesztőprogramok",
- "properties": "Tulajdonságok",
- "recommendedDrivers": "Ajánlott illesztőprogramok"
- },
- "driverAddFilter": "Szűrő hozzáadása",
- "driverApplicableDevices": "Megfelelő eszközök",
- "driverApprovalStatus": "Állapot",
- "driverBulkActions": "Tömeges műveletek",
- "driverClass": "Illesztőprogram besorolása",
- "driverCount": "{0}–{1}. megjelenítése a(z) {2} rekord közül",
- "driverFilterNoneSelected": "Egy elem sincs kijelölve",
- "driverManufacturer": "Gyártó",
- "driverName": "Illesztőprogram neve",
- "driverNameLower": "windows illesztőprogram-frissítés üzembe helyezése",
- "driverNameUpper": "Windows illesztőprogram-frissítés üzembe helyezése",
- "driverRefresh": "Frissítés",
- "driverReleaseDate": "Kiadás dátuma",
- "driverSearch": "Keresés",
- "driverSearchKeyword": "Adja meg a keresési kulcsszót",
- "driverVersion": "Verzió",
- "firstDeploymentDate": "Első üzembe helyezés",
- "infoBoxText": "A készlet létrehozása a szabályzat hozzárendelése és létrehozása után akár 24 óráig is eltarthat.",
- "textBlockText": "Válassza ki a szabályzat jóváhagyási és üzembe helyezési beállításait. Beállíthatja, hogy egy szabályzat automatikusan vagy manuálisan hagyja jóvá és telepítse a frissítéseket. A jóváhagyási módszer nem módosítható a szabályzat létrehozása után, de az egyes illesztőprogram-jóváhagyások és az üzembe helyezés részleteinek módosítása a hozzárendelt eszközök készletének létrehozása után lehetséges lesz."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "E beállításokkal ellenőrizheti, hogy mely felhasználók telepítenek olyan alkalmazásokat, amelyek használatát a cége nem engedélyezte. Válassza ki a korlátozott alkalmazások listájának típusát:
\r\n Letiltott alkalmazások – azon alkalmazások listája, amelyek felhasználók általi telepítéséről értesülni szeretne. \r\n Jóváhagyott alkalmazások – azon alkalmazások listája, amelyek használatát a cége engedélyezte. Ha a felhasználók egy ebben a listában nem szereplő alkalmazást telepítenek, Ön erről értesítést kap. \r\n ",
- "androidZebraMxZebraMx": "Zebra-eszközök konfigurálása MX-profil XML formátumban való feltöltésével.",
- "iosDeviceFeaturesAirprint": "Ezekkel a beállításokkal megadhatja, hogy az iOS-eszközök automatikusan csatlakozzanak a hálózatbeli AirPrint-kompatibilis nyomtatókhoz. Ehhez szüksége lesz a nyomtatók IP-címére és elérési útjára.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Konfiguráljon egy olyan alkalmazásbővítményt, amely engedélyezi az egyszeri bejelentkezés (SSO) használatát az iOS 13.0 vagy újabb rendszert futtató eszközök esetében.",
- "iosDeviceFeaturesHomeScreenLayout": "Konfigurálja az iOS-eszközök dokkjának és főképernyőjének elrendezését. Bizonyos eszközöknél a megjelenített elemek száma korlátozott lehet.",
- "iosDeviceFeaturesIOSWallpaper": "Kép megjelenítése az iOS-eszközök főképernyőjén és/vagy zárolási képernyőjén.\r\n Ha egyedi képet szeretne megjeleníteni az egyes képernyőkön, akkor hozzon létre egy-egy profilt a zárolási képernyőn, valamint a főképernyőn megjelenő képpel.\r\n Ezt követően rendelje hozzá mindkét profilt az egyes felhasználókhoz.\r\n \r\n
\r\n
Maximális fájlméret: 750 KB
\r\n
Fájltípus: PNG, JPG vagy JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Az alkalmazások értesítési beállításainak megadása. Az iOS 9.3-as és újabb verzióiban támogatott.",
- "iosDeviceFeaturesSharedDevice": "A zárolási képernyőn megjelenő nem kötelező szöveg megadása. Ezt a funkciót az IOS 9.3-as és újabb verziói támogatják. További információ",
- "iosGeneralApplicationRestrictions": "E beállításokkal ellenőrizheti, hogy mely felhasználók telepítenek olyan alkalmazásokat, amelyek használatát a cége nem engedélyezte. Válassza ki a korlátozott alkalmazások listájának típusát:
\r\n Letiltott alkalmazások – azon alkalmazások listája, amelyek felhasználók általi telepítéséről értesülni szeretne. \r\n Jóváhagyott alkalmazások – azon alkalmazások listája, amelyek használatát a cége engedélyezte. Ha a felhasználók egy ebben a listában nem szereplő alkalmazást telepítenek, Ön erről értesítést kap. \r\n ",
- "iosGeneralApplicationVisibility": "A megjelenített alkalmazások listáján megadhatja, hogy a felhasználó mely iOS-alkalmazásokat jeleníthesse meg és indíthassa el. A rejtett alkalmazások listáján azokat az iOS-alkalmazásokat adhatja meg, amelyeket a felhasználó nem jeleníthet meg és nem indíthat el.",
- "iosGeneralAutonomousSingleAppMode": "Ha erre a listára felvesz és egy eszközhöz hozzárendel egy alkalmazást, kizárólag arra az alkalmazásra korlátozhatja az eszköz használatát, ha az elindult, illetve zárolhatja az eszközt bizonyos művelet végrehajtásakor (például vizsgáztatás ideje alatt). A művelet befejeződése, illetve a korlátozás feloldása után az eszköz visszatér a szokásos állapotba.",
- "iosGeneralKiosk": "Kioszkmódban zárolódnak az eszköz különböző beállításai, illetve egyetlen alkalmazás futtatására korlátozható az eszköz használata. Ez többek között kiskereskedelmi üzletekben lehet hasznos, ahol az eszközön egyetlen bemutatóalkalmazásnak kell futnia.",
- "macDeviceFeaturesAirprint": "Ezekkel a beállításokkal megadhatja, hogy a macOS-eszközök automatikusan csatlakozzanak a hálózatbeli AirPrint-kompatibilis nyomtatókhoz. Ehhez szüksége lesz a nyomtatók IP-címére és erőforrás-elérési útjára.",
- "macDeviceFeaturesAssociatedDomains": "A társított tartományok konfigurálásával megoszthatja az adatokat és a bejelentkezési hitelesítő adatokat a szervezet alkalmazásai és webhelyei között. Ez a profil a macOS 10.15-ös vagy újabb verzióját futtató eszközökön alkalmazható.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Konfiguráljon egy olyan alkalmazásbővítményt, amely engedélyezi az egyszeri bejelentkezés (SSO) használatát a macOS 10.15 vagy újabb rendszert futtató eszközök esetében.",
- "macDeviceFeaturesLoginItems": "Kiválaszthatja, hogy mely alkalmazások, fájlok és mappák legyenek nyitva, amikor a felhasználók bejelentkeznek az eszközeiken. Ha nem szeretné, hogy a felhasználók megváltoztassák a kiválasztott alkalmazások megnyitásának módját, elrejtheti az alkalmazást a felhasználói konfigurációból.",
- "macDeviceFeaturesLoginWindow": "Konfigurálja a macOS bejelentkezési képernyőjének megjelenését, valamint a felhasználók számára a bejelentkezés előtt és után elérhető funkciókat.",
- "macExtensionsKernelExtensions": "Használja ezeket a beállításokat a kernelbővítményekre vonatkozó szabályzat konfigurálásához a 10.13.2 vagy újabb verziót futtató macOS-eszközökön.",
- "macGeneralDomains": "A felhasználó által küldött vagy fogadott azon e-mailek, amelyek nem egyeznek az itt megadott tartománnyal, nem megbízhatóként lesznek megjelölve.",
- "windows10EndpointProtectionApplicationGuard": "A Microsoft Edge használatakor a Microsoft Defender alkalmazásőr védi a környezetet a munkahely által megbízhatóként meg nem jelölt webhelyektől. Ha a felhasználók olyan webhelyeket keresnek fel, amelyek nem találhatók meg az elszigetelt hálózat határán belül, a rendszer egy virtuális böngészési Hyper-V-munkamenetben nyitja meg ezeket a webhelyeket. A megbízható webhelyek meghatározása a hálózathatárral történik, amelyet az Eszközkonfiguráció lapon lehet beállítani. Megjegyzés: ez a funkció kizárólag 64-bites Windows 10 vagy újabb verziókat futtató eszközökhöz érhető el.",
- "windows10EndpointProtectionCredentialGuard": "A Credential Guard engedélyezésekor a a rendszer a következő szükséges beállításokat engedélyezi:\r\n \r\n
\r\n
A virtualizálás-alapú biztonság engedélyezése: A virtualizálás-alapú biztonság (VBS) bekapcsolása a következő újraindításkor. A virtualizálás-alapú biztonság a Windows hipervizorral támogatja a biztonsági szolgáltatásokat.
\r\n \r\n
Biztonságos rendszerindítás közvetlen memória-hozzáféréssel: A VBS bekapcsolása biztonságos rendszerindítással és közvetlen memória-hozzáféréssel (DMA).
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Válasszon ki további olyan alkalmazásokat, amelyeket a Microsoft Defender alkalmazásfelügyeleti funkciójával szeretne naplózni, vagy amelyek futtatását ezzel a funkcióval kívánja engedélyezni. A Windows-összetevők és a Windows Áruházból származó alkalmazások automatikusan megbízhatónak minősülnek, és futtathatók.
\r\n A rendszer nem tiltja le a Csak naplózás üzemmódban futó alkalmazásokat, és ezek eseményeit a helyi ügyfélnaplókban rögzíti.\r\n ",
- "windows10GeneralPrivacyPerApp": "Olyan alkalmazások hozzáadása, amelyek viselkedésének az „Alapértelmezett adatvédelem” kategóriában meghatározottól eltérőnek kell lennie.",
- "windows10NetworkBoundaryNetworkBoundary": "A hálózathatár a vállalati erőforrások listájából áll, például a vállalati hálózat számítógépeihez tartozó felhőbeli tartományok vagy IP-címtartományok. A hálózathatárok meghatározásával szabályzatokat alkalmazhat az ilyen helyeken található adatok védelmére.",
- "windowsHealthMonitoring": "A Windows biztonságiállapot-figyelési szabályzatának konfigurálása.",
- "windowsPhoneGeneralApplicationRestrictions": "A Windows Phone letilthatja a felhasználók számára a tiltott alkalmazások listáján szereplő, illetve a jóváhagyott alkalmazások listáján nem szereplő alkalmazások telepítését vagy futtatását. Minden felügyelt alkalmazást hozzá kell adni a jóváhagyott alkalmazások listájához."
- },
- "Inputs": {
- "accountDomain": "Fióktartomány",
- "accountDomainHint": "pl. contosodomain",
- "accountDomainInfoBalloon": "Adja meg a felhasználói fiók tartományát.",
- "accountTypeInfoBalloon": "Adja meg a konfigurálandó fiók típusát a hitelesítési modell alapján",
- "allowContactSetting": "A felhasználó módosíthatja a kapcsolattartási beállítást",
- "allowContactSyncInfoBalloon": "Adja meg, hogy a felhasználó módosíthassa-e a kapcsolattartó-szinkronizálási beállítást",
- "allowUserChange": "A felhasználó módosíthatja a beállításokat",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Adjon meg egy, a következőhöz hasonló csomagnevet: com.microsoft.word",
- "androidUrlValidation": "Adjon meg egy érvényes URL-címet, például egy ehhez hasonlót: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "Alkalmazástelepítési hatókör",
- "appUrlLabel": "Alkalmazásáruház URL-címe",
- "appleUrlValidation": "Érvényes URL-címet adjon meg. Példa: https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Alkalmazható eszköztípus",
- "assignmentActionLabel": "Mód",
- "authenticationMethodInfoBalloon": "Adja meg a felhasználóhitelesítési módszert",
- "authenticationMetod": "Hitelesítési módszer",
- "authenticationType": "Hitelesítés típusa",
- "authenticationTypeInfoBalloon": "Adja meg a felhasználóhitelesítési módszert",
- "availableLicenseCount": "Rendelkezésre álló licencek",
- "basicAuth": "Alapszintű hitelesítés",
- "biometricsInfoBalloon": "Megkövetelheti a biometria, például TouchID vagy a FaceID használatát azoktól a felhasználóktól, akik szeretnék elérni az alkalmazást az eszközükön. Ha kötelező a használata, a felhasználóknak az ebben a profilban kiválasztott hitelesítési módszer mellett a biometriát is használniuk kell. Ezt a beállítást nem ajánlott engedélyezni, ha Intune App Protection-szabályzatok vannak érvénybe léptetve, mert az alkalmazásvédelmi szabályzat olyan hozzáférési követelményeket tartalmaz, amelyeknek a felügyelt adatok elérése előtt kell megfelelni. Ha mindkét funkció engedélyezve van, az Outlook Mobile elérésekor több hozzáférés-jóváhagyási panel jelenhet meg. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva. ",
- "bookNameLabel": "Könyv neve",
- "bundleDescriptionHint": "Adjon meg egy leírást, amely leírja a befoglalt alkalmazásokat.",
- "calendar": "Naptár",
- "categoryLabel": "Kategória",
- "categoryNameLabel": "Alapértelmezett név",
- "certProfileType": "Tanúsítványprofil típusa",
- "certificate": "Tanúsítvány",
- "certificates": "Tanúsítványok",
- "commandLineLabel": "Parancssori argumentumok",
- "commandLineSizeHint": "A parancssori argumentumok szövege legfeljebb 1024 karakter hosszú lehet",
- "configurationSettingsFormatLabel": "Konfigurációs beállítások formátuma",
- "configurationSettingsLabel": "Beállítások formátuma",
- "contactSync": "Partnerek mentése",
- "contactSyncInfoBalloon": "A névjegyek mobileszközön lévő natív címjegyzékbe történő mentése lehetővé teszi az új hívások és SMS-ek összekapcsolását a felhasználó meglévő Outlook-névjegyeivel. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva.",
- "contacts": "Kapcsolattartók",
- "createdDateTime": "Létrehozva",
- "defaultCategoryHint": "Az alapértelmezett kategóriák nem módosíthatók",
- "deploySMimeCertsFromIntune": "S/MIME-tanúsítványok üzembe helyezése az Intune-ból",
- "descriptionGenericLabel": "Leírás",
- "descriptionHint": "Leírás megadása...",
- "descriptionLabel": "Leírás",
- "descriptionSizeHint": "A leírás nem lehet hosszabb 10 000 karakternél",
- "developerLabel": "Fejlesztő",
- "developerSizeHint": "A fejlesztő neve legfeljebb 256 karakter hosszú lehet.",
- "disable": "Letiltás",
- "disabled": "Letiltva",
- "displayNameLabel": "Név",
- "displayVersionHint": "Adja meg az alkalmazás verziószámát",
- "displayVersionLabel": "Alkalmazásverzió",
- "displayVersionLengthCheck": "A megjelenítési verzió hossza legfeljebb 130 karakter lehet",
- "eBookCategoryNameLabel": "Alapértelmezett név",
- "emailAccount": "E-mail-fiók neve",
- "emailAccountHint": "példa: Céges e-mail",
- "emailAccountInfoBalloon": "Adja meg az e-mail-fiók felhasználók eszközein megjelenő nevét",
- "emailAddressAttribute": "E-mail-cím attribútuma a Microsoft Entra ID-ból",
- "emailAddressInfoBalloon": "Adja meg az e-mailek küldésére és fogadására szolgáló e-mail-címet",
- "emailServer": "Levelezési kiszolgáló",
- "emailServerHint": "pl. mail.contoso.com",
- "emailServerInfoBalloon": "Adja meg az Exchange-kiszolgáló állomásnevét",
- "enable": "Engedélyezés",
- "enableSMime": "S/MIME engedélyezése",
- "enabled": "Engedélyezve",
- "encryptAllEmails": "Az összes e-mail titkosítása",
- "encryptionCertificates": "Titkosítási tanúsítványok",
- "endUserNotifications": "Végfelhasználói értesítések",
- "enrollmentTypeLabel": "Eszközregisztráció típusa",
- "externalRecipients": "Külső címzettek e-mail-tipp",
- "externalRecipientsInfoBalloon": "A Külső címzettek e-mail-tipp akkor jelenik meg, ha a feladó külső címzettet vagy külső címzetteket tartalmazó terjesztési csoportot ad hozzá az e-mailhez. Ez az e-mail-tipp arról tájékoztatja a feladót, hogy az adott e-mail elhagyja-e a céget. Ez megkönnyíti a szóhasználattal, a hangnemmel és a tartalommal kapcsolatos helyes döntések meghozatalát. Ez a funkció csak az Exchange Online-fiókok és a modern hibrid hitelesítést használó helyi fiókok számára érhető el. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Bekapcsolva.",
- "focusedInbox": "Szűrt levelek",
- "focusedInboxInfoBalloon": "A Szűrt levelek funkció két lapra választja szét beérkezett üzenetek mappáját – a Szűrt és az Egyéb lapra. A legfontosabb e-mailek a Szűrt lapon jelennek meg, míg a többi rejtve marad, de könnyen elérhető az Egyéb lapon. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Bekapcsolva. ",
- "fullScreenEnabledLabel": "Teljes képernyő",
- "gmailNineAmountOfEmail": "Szinkronizálandó e-mailek mennyisége",
- "gmailNineAuthenticationMethodInfoBalloon": "Adja meg a felhasználók levelezési kiszolgálón történő hitelesítésének módját. A tanúsítványok használatával biztosíthatja a legbiztonságosabb és leggördülékenyebb felhasználói élményt a végfelhasználók számára. A tanúsítványalapú hitelesítés még nem érhető el, mert az SCEP- és PKCS-tanúsítványprofilok nem érhetők el az eszköztulajdonosi eszközök számára. ",
- "gmailNineCertificateUPNInfoBalloon": "A tanúsítványnak a tulajdonos alternatív neveként tartalmaznia kell az egyszerű felhasználónevet.",
- "gmailNineEmailAddressInfoBalloon": "Az Intune által a Microsoft Entra ID-ból beolvasott attribútum, amellyel dinamikusan generálható a profil e-mail-címe. Példa: Név@contoso.com (UPN). További információ az e-mail-profilok Microsoft Entra-attribútumairól.",
- "gmailNineEmailServerInfoBalloon": "Annak a levelezési kiszolgálónak az Exchange-helye (URL-címe), amelyhez kapcsolódva a megadott alkalmazás letölti az e-maileket.",
- "gmailNineEmailSynchronizeInfoBalloon": "Szabályozhatja, hogy az ügyfél mennyi e-mailt szinkronizál.",
- "gmailNineSSLInfoBalloon": "Az SSL engedélyezése a levelezési kiszolgálóval való biztonságos kommunikáció érdekében.",
- "gmailNineUsernameInfoBalloon": "Az Intune által a Microsoft Entra ID-ból beolvasott attribútum, amellyel dinamikusan generálható a profil felhasználóneve. Példa: Név@contoso.com (UPN) vagy MyName (felhasználónév). További információ az e-mail-profilok Microsoft Entra-attribútumairól.",
- "ignoreManifestScope": "Jegyzékfájl hatókörének figyelmen kívül hagyása",
- "ignoreVersionDetection": "Alkalmazásverzió figyelmen kívül hagyása",
- "informationUrlLabel": "Információs URL-cím",
- "informationUrlSizeHint": "Az információs URL-cím legfeljebb 1024 karakter hosszú lehet.",
- "installAsManaged": "Telepítés felügyeltként",
- "installationSourceLabel": "Alkalmazás típusa",
- "installerTypeInfoBalloon": "Az alkalmazáscsomag telepítőtípusa.",
- "installerTypeLabel": "Telepítő típusa",
- "isFeatured": "Megjelenítés kiemelt alkalmazásként a céges portálon",
- "isMAMEnabledToggleLabel": "Igen",
- "lastModifiedDateTime": "Utolsó frissítés időpontja",
- "ldapUrl": "LDAP URL-cím",
- "licensingType": "Eszközkörnyezet-hozzárendelés támogatása",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimális operációsrendszer-verzió",
- "modernAuth": "Modern hitelesítés",
- "nameHint": "Írjon be egy nevet.",
- "nameLabel": "Név",
- "nameSizeHint": "A név legfeljebb 512 karakter hosszú lehet.",
- "notConfigured": "Nincs beállítva",
- "notesLabel": "Megjegyzések",
- "notesSizeHint": "A jegyzet szövege legfeljebb 1024 karakter hosszú lehet.",
- "notificationType": "Értesítéstípus",
- "oneDay": "Egy nap",
- "oneMonth": "egy hónap",
- "oneWeek": "Egy hét",
- "outlookSMimeSettings": "Az Outlook S/MIME-beállításai",
- "ownerLabel": "Tulajdonos",
- "ownerSizeHint": "A tulajdonos neve legfeljebb 256 karakter hosszú lehet.",
- "packageIdLabel": "Csomagazonosító",
- "packageNameLabel": "Csomag neve",
- "pivCredentialNotConfigured": "Nem választott ki a származtatott hitelesítőadatok kibocsátóját a bérlő számára. Be kell állítania egyet ahhoz, hogy sikeresen alkalmazni tudja a szabályzatot eszközökre.",
- "platformLabel": "Platform",
- "policyDescriptionLabel": "Leírás",
- "policyNameLabel": "Név",
- "preComposedIconEnabled": "Előre összeállított",
- "primarySMTPAddress": "Elsődleges SMTP-cím",
- "privacyUrlLabel": "Adatvédelmi URL-cím",
- "publisherHint": "Adja meg a közzétevő nevét",
- "publisherLabel": "Közzétevő",
- "publisherSizeHint": "A közzétevő neve legalább 2, de legfeljebb 1024 karakterből állhat",
- "require": "Kötelező",
- "requireBiometrics": "Az alkalmazás eléréséhez biometria szükséges",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "Legalább egy hatókörcímke szükséges",
- "searchAppLabel": "Adja meg az alkalmazást",
- "searchAppLinkText": "Keresés az App Store-ban",
- "searchWinGetPublicRepositoryLinkText": "Keresés a Windows-csomagkezelő közösségi adattárban",
- "searchWinGetStoreRepositoryLinkText": "Keresés a Microsoft Store-alkalmazásban (új)",
- "selectAAD": "Microsoft Entra-attribútum kiválasztása",
- "selectAppFileLabel": "Fájl kiválasztása",
- "selectAppFileLinkText": "Alkalmazáscsomag-fájl kiválasztása",
- "selectAppFileToUpdateLabel": "Frissíteni kívánt fájl kiválasztása",
- "selectAuthMethod": "Hitelesítéstípus kiválasztása",
- "selectAuthType": "Hitelesítési típus kiválasztása",
- "selectCatalogAppLabel": "Adja meg az alkalmazást",
- "selectCatalogAppLinkText": "Keresés a vállalati alkalmazáskatalógusban",
- "selectCertificate": "Válasszon tanúsítványt",
- "signAllEmails": "Az összes e-mail aláírása",
- "signingCertificates": "Aláíró tanúsítványok",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Csomag leírása",
- "suiteNameLabel": "Csomag neve",
- "targetApplicationBundleIdentifier": "Cél alkalmazáscsomag-azonosító",
- "targetedPlatformsLabel": "Célzott platform",
- "tasks": "Tevékenységek",
- "threeDays": "Három nap",
- "totalLicenseCount": "Az összes licenc",
- "twoWeeks": "Két hét",
- "unifiedAssignmentsLabel": "Hozzárendelés a következőhöz:",
- "unlimited": "Korlátlan",
- "urlHint": "Érvényes URL-t adjon meg",
- "useManagedBrowserHint": "Csak Android és iOS rendszeren érhető el. További információ.",
- "useManagedBrowserLabel": "Felügyelt böngésző használatának megkövetelése a hivatkozás megnyitásához",
- "userPrinicipalName": "Egyszerű felhasználónév",
- "username": "Felhasználónév",
- "usernameAttribute": "Felhasználónév-attribútum Microsoft Entra ID-ból",
- "usernameAttributreInfoBalloon": "Adja meg a fiók hitelesítésére szolgáló e-mail-profil egyszerű felhasználónevét",
- "usernamePassword": "Felhasználónév és jelszó",
- "webAppUrlHint": "Adjon meg egy HTTP:// vagy HTTPS:// előtaggal kezdődő érvényes URL-címet",
- "webAppUrlLabel": "Alkalmazás URL-címe",
- "webAppUrlSizeHint": "Az alkalmazás URL-címe legfeljebb 1024 karakter hosszú lehet.",
- "windowsUrlValidation": "Adjon meg egy érvényes URL-címet, például: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "Megadott XML-adatok",
- "xmlFormatInvalid": "Az XML-alapú szabályzat formátuma érvénytelen.",
- "xmlTooLarge": "A bemenet méretének 1 MB-nál kisebbnek kell lennie."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Nem sikerült a(z) {0} törlése",
- "failureCa": "Nem sikerült törölni a(z) {0} elemet, mert a CA-házirendek hivatkoznak rá",
- "modifying": "A(z) {0} törlése",
- "success": "A(z) {0} törlése sikerült"
- },
- "Notify": {
- "failure": "Nem sikerült frissíteni a(z) {0} alkalmazást",
- "modifying": "{0} módosítása folyamatban",
- "success": "A(z) {0} frissítése sikeresen megtörtént"
- },
- "menuLabel": "Hitelesítési környezet"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "További információ az összevonási szolgáltatók előírásainak megfelelő hitelesítési módszerek megköveteléséről.",
- "certificate": "Tanúsítványalapú hitelesítés",
- "infoBubble": "Adja meg az összevonási szolgáltatóra (például az AD FS-re) nézve kötelezően használandó hitelesítési módszert.",
- "multifactor": "Többtényezős hitelesítés",
- "require": "Összevont hitelesítési módszer megkövetelése (Előzetes verzió)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Az állandó böngésző-munkamenetre vonatkozó szabályzat csak akkor működik megfelelően, ha a „Minden felhőalkalmazás” lehetőség van kiválasztva. Frissítse a felhőalkalmazások kijelölését."
- },
- "Option": {
- "always": "Mindig állandó",
- "help": "Az állandó böngésző-munkamenet lehetővé teszi a felhasználók számára, hogy a böngészőablak bezárása és újbóli megnyitása után bejelentkezve maradjanak. \n
\n
A beállítás a „Minden felhőalkalmazás” lehetőség kiválasztásakor működik megfelelően.
\n
Ez nincs hatással a jogkivonat-élettartam és a bejelentkezési gyakoriság beállítására.
\n
Ezzel a beállítással felülbírálja a vállalati védjegyezésben megadott „Bejelentkezve maradok lehetőség megjelenítése” szabályzatot.
\n
A „Soha nem állandó” beállítás minden összevont hitelesítési szolgáltatásból beküldött állandó egyszeri bejelentkezési jogcímet felülbírál.
\n
A „Soha nem állandó” beállítás megakadályozza az egyszeri bejelentkezést mobileszközökön az alkalmazások között, illetve az alkalmazások és a felhasználó mobilböngészője között.
\n",
- "label": "Állandó böngésző-munkamenet",
- "never": "Soha nem állandó"
- },
- "Warning": {
- "allApps": "Az állandó böngésző-munkamenet csak akkor működik megfelelően, ha a Minden felhőalkalmazás lehetőség van kiválasztva. Módosítsa a felhőalkalmazások kijelölését. További információkért kattintson ide."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Óra vagy nap",
- "value": "Gyakoriság"
- },
- "Option": {
- "Day": {
- "plural": "{0} nap",
- "singular": "1 nap"
- },
- "Hour": {
- "plural": "{0} óra",
- "singular": "1 óra"
- },
- "daysOption": "Nap",
- "everytime": "Minden alkalommal",
- "help": "Az az időtartam, amely után a felhasználónak be kell jelentkeznie, ha megpróbál hozzáférni egy erőforráshoz. Az alapértelmezett beállítás 90 nap folyamatos számlálással, azaz a felhasználónak akkor kell újból hitelesítést végeznie, amikor először próbál meg hozzáférni egy erőforráshoz, miután 90 napig vagy annál tovább nem volt aktív a számítógépén.",
- "hoursOption": "Óra",
- "label": "Bejelentkezés gyakorisága",
- "placeholder": "Válasszon egységet"
- }
- },
- "mainOption": "Munkamenet-élettartam módosítása",
- "mainOptionHelp": "Konfigurálhatja, hogy a rendszer milyen gyakran kérjen be adatokat a felhasználóktól, és milyen gyakran őrizze meg a böngésző-munkameneteket. Előfordulhat, hogy azok az alkalmazások, amelyek nem támogatják a modern hitelesítési protokollokat, nem tartják be ezeket a szabályzatokat. Ebben az esetben lépjen kapcsolatba az adott alkalmazás fejlesztőjével."
- },
- "SingleSelectorActive": {
- "failed": "Nem sikerült betölteni ezeket az adatokat.",
- "reattempt": "Adatok betöltése: {0}. újbóli kísérlet összesen {1} kísérletből."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Címtárbeli szerepkörök kiválasztása"
- },
- "Excluded": {
- "gridAria": "Kizárt felhasználók listája"
- },
- "Included": {
- "gridAria": "Belefoglalt felhasználók listája"
- },
- "Validation": {
- "customRoleIncluded": "A címtárszerepkörök legalább egy egyéni szerepkört foglalnak magukban",
- "customRoleSelected": "Legalább egy egyéni szerepkör van kiválasztva",
- "failed": "A(z) „{0}” beállítás konfigurálása kötelező",
- "roles": "Válasszon ki legalább egy szerepkört",
- "usersGroups": "Válasszon ki legalább egy felhasználót vagy csoportot"
- },
- "learnMore": "A hozzáférés-vezérlés azon alapszik, hogy kire érvényes a szabályzat, például felhasználókra és csoportokra, számításifeladat-identitásokra, címtárbeli szerepkörökre vagy külső vendégekre."
- },
- "advancedTabText": "Speciális",
- "allCloudAppsErrorBox": "A Minden felhőalkalmazás lehetőséget kell kiválasztani, ha a Jelszómódosítás megkövetelése engedély van kiválasztva",
- "allCloudAppsReauth": "A „Minden felhőalkalmazás” beállítást be kell jelölni, ha a „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő és a „Bejelentkezési kockázat“ feltétel van kiválasztva",
- "allCloudOrSpecificApps": "A „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „minden felhőalkalmazás” vagy a kifejezetten támogatott alkalmazások kiválasztását",
- "allDayCheckboxLabel": "Egész nap",
- "allDevicePlatforms": "Bármely eszköz",
- "allGuestUserInfoContent": "Tartalmazza a Microsoft Entra B2B-vendégeket, de a SharePoint B2B-vendégek nem",
- "allGuestUserLabel": "Minden vendég- és külső felhasználó",
- "allRiskLevelsOption": "Minden kockázati szint",
- "allTrustedLocationLabel": "Minden megbízható hely",
- "allUserGroupSetSelectorLabel": "Minden kiválasztott felhasználó és csoport",
- "allUsersReauth": "A „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „Minden felhasználó” bejelölését",
- "allUsersString": "Minden felhasználó",
- "and": "{0} ÉS {1} ",
- "andWithGrouping": "({0}) ÉS {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Bármely felhőalkalmazás",
- "appContextOptionInfoContent": "Kért hitelesítési címke",
- "appContextOptionLabel": "Kért hitelesítési címke (Előnézet)",
- "appContextUriPlaceholder": "Példa: uri:contoso.com:level3",
- "appEnforceInfoBubble": "Az alkalmazás által kényszerített korlátozások további adminisztrátori beállításokat követelhetnek meg a felhőalkalmazásokban. A korlátozások csak új munkamenetekhez kapcsolódóan lépnek életbe.",
- "appNotSetSeletorLabel": "0 felhőalkalmazás kiválasztva",
- "appReauthNotSupported": "Ez az alkalmazás nem támogatja a „Bejelentkezés gyakorisága minden alkalom” munkamenet-vezérlőt.",
- "applyConditionClientAppInfoBalloonContent": "Ügyfélalkalmazások konfigurálása a szabályzat adott ügyfélalkalmazásokra való érvényesítéséhez",
- "applyConditionDevicePlatformInfoBalloonContent": "Eszközplatformok konfigurálása a szabályzat adott platformokra való érvényesítéséhez",
- "applyConditionDeviceStateInfoBalloonContent": "Eszközállapot konfigurálása a szabályzat adott eszközállapot(ok)ra való érvényesítéséhez",
- "applyConditionLocationInfoBalloonContent": "Helyek konfigurálása a szabályzat megbízható/nem megbízható helyekre való érvényesítéséhez",
- "applyConditionSigninRiskInfoBalloonContent": "A bejelentkezési kockázat konfigurálása a szabályzat kiválasztott kockázati szint(ek)re való érvényesítéséhez",
- "applyConditionUserRiskInfoBalloonContent": "A felhasználói kockázat konfigurálása a szabályzat kiválasztott kockázati szint(ek)re való érvényesítéséhez",
- "applyConditonLabel": "Konfigurálás",
- "ariaLabelPolicyDisabled": "A szabályzat le van tiltva",
- "ariaLabelPolicyEnabled": "A szabályzat engedélyezve van",
- "ariaLabelPolicyReportOnly": "A szabályzat „Csak jelentés” üzemmódban van",
- "blockAccess": "Hozzáférés letiltása",
- "builtInDirectoryRoleLabel": "Beépített címtárszerepkörök",
- "casCustomControlInfo": "Az egyéni szabályzatokat Cloud App Security portálon kell konfigurálni. Ez a vezérlő azonnal használható a kiemelt alkalmazásokhoz, és önállóan bevezethető bármely alkalmazáshoz. A két forgatókönyvvel kapcsolatos további információért kattintson ide.",
- "casInfoBubble": "Ez a vezérlő számos felhőalapú alkalmazások esetében használható.",
- "casPreconfiguredControlInfo": "Ez a vezérlő azonnal használható a kiemelt alkalmazásokhoz, és önállóan bevezethető bármely alkalmazáshoz. A két forgatókönyvvel kapcsolatos további információért kattintson ide.",
- "cert64DownloadCol": "Base64-tanúsítvány letöltése",
- "cert64Name": "Base64 VPN-tanúsítvány",
- "certDownloadCol": "Tanúsítvány letöltése",
- "certDurationCol": "Lejárat",
- "certDurationStartCol": "Érvényesség kezdete",
- "certName": "VPN-tanúsítvány",
- "certainApps": "Csak bizonyos alkalmazások támogatottak a „Bejelentkezési gyakoriság minden alkalommal“ beállítás esetében, ha a „Többtényezős hitelesítés megkövetelése“ és a „Jelszómódosítás megkövetelése“ engedély nincs kiválasztva",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Alkalmazások kiválasztása",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Kiválasztott alkalmazások",
- "chooseApplicationsEmpty": "Nincsenek alkalmazások",
- "chooseApplicationsNone": "Egyik sem",
- "chooseApplicationsNoneFound": "A(z) {0} felhasználó nem található. Adjon meg egy másik nevet vagy azonosítót.",
- "chooseApplicationsPlural": "{0} és {1} további",
- "chooseApplicationsReAuthEverytimeInfo": "Az alkalmazást keresi? Egyes alkalmazások nem használhatók az „Újrahitelesítés megkövetelése – minden alkalommal” munkamenet-vezérlővel",
- "chooseApplicationsRemove": "Eltávolítás",
- "chooseApplicationsReturnedPlural": "{0} alkalmazás található",
- "chooseApplicationsReturnedSingular": "1 alkalmazás található",
- "chooseApplicationsSearchBalloon": "Alkalmazás keresése név vagy azonosító megadásával.",
- "chooseApplicationsSearchHint": "Alkalmazások keresése...",
- "chooseApplicationsSearchLabel": "Alkalmazások",
- "chooseApplicationsSearching": "Keresés...",
- "chooseApplicationsSelect": "Kijelölés",
- "chooseApplicationsSelected": "Kiválasztva",
- "chooseApplicationsSingular": "{0} és 1 további",
- "chooseApplicationsTooMany": "Nem jeleníthető meg az összes eredmény. Szűrje az eredményeket a keresési mező használatával.",
- "chooseLocationCorpnetItem": "Vállalati hálózat",
- "chooseLocationSelectedLocationsLabel": "Kijelölt helyek",
- "chooseLocationTrustedIpsItem": "Többtényezős hitelesítés megbízható IP-címei",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Helyek kiválasztása",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Kiválasztott helyek",
- "chooseLocationsEmpty": "Nincsenek helyek",
- "chooseLocationsExcludedSelectorTitle": "Kijelölés",
- "chooseLocationsIncludedSelectorTitle": "Kijelölés",
- "chooseLocationsNone": "Egyik sem",
- "chooseLocationsNoneFound": "A(z) {0} felhasználó nem található. Adjon meg egy másik nevet vagy azonosítót.",
- "chooseLocationsPlural": "{0} és {1} további",
- "chooseLocationsRemove": "Eltávolítás",
- "chooseLocationsReturnedPlural": "A rendszer {0} helyet talált",
- "chooseLocationsReturnedSingular": "A rendszer 1 helyet talált",
- "chooseLocationsSearchBalloon": "Hely keresése név megadásával.",
- "chooseLocationsSearchHint": "Helyek keresése...",
- "chooseLocationsSearchLabel": "Helyek",
- "chooseLocationsSearching": "Keresés...",
- "chooseLocationsSelect": "Kijelölés",
- "chooseLocationsSelected": "Kijelölt",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Kijelölés",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Kijelölés",
- "chooseLocationsSingular": "{0} és 1 további",
- "chooseLocationsTooMany": "Nem jeleníthető meg az összes eredmény. Szűrje az eredményeket a keresési mező használatával.",
- "claimProviderAddCommandText": "Új egyéni vezérlő",
- "claimProviderAddNewBladeTitle": "Új egyéni vezérlő",
- "claimProviderDeleteCommand": "Törlés",
- "claimProviderDeleteDescription": "Biztos, hogy törli a(z) {0} hálózatot? Ez a művelet nem vonható vissza.",
- "claimProviderDeleteTitle": "Folytatja?",
- "claimProviderEditInfoText": "Adja meg a jogcímszolgáltatóktól kapott, egyéni vezérlőkhöz tartozó JSON-t.",
- "claimProviderNotificationCreateDescription": "A(z) „{0}” nevű egyéni vezérlő létrehozása",
- "claimProviderNotificationCreateFailedDescription": "A(z) „{0}” nevű egyéni vezérlő létrehozása sikertelen. Próbálkozzon újra később.",
- "claimProviderNotificationCreateFailedTitle": "Nem sikerült létrehozni az egyéni vezérlőt",
- "claimProviderNotificationCreateSuccessDescription": "A(z) „{0}” nevű egyéni vezérlő létrehozva",
- "claimProviderNotificationCreateSuccessTitle": "Hálózat ({0}) létrehozva",
- "claimProviderNotificationCreateTitle": "Hálózat ({0}) létrehozása",
- "claimProviderNotificationDeleteDescription": "A(z) „{0}” nevű egyéni vezérlő törlése",
- "claimProviderNotificationDeleteFailedDescription": "A(z) „{0}” nevű egyéni vezérlő törlése sikertelen. Próbálkozzon újra később.",
- "claimProviderNotificationDeleteFailedTitle": "Nem sikerült törölni az egyéni vezérlőt",
- "claimProviderNotificationDeleteSuccessDescription": "A(z) „{0}” nevű egyéni vezérlő törölve",
- "claimProviderNotificationDeleteSuccessTitle": "A(z) {0} hálózat törölve",
- "claimProviderNotificationDeleteTitle": "A(z) {0} törlése",
- "claimProviderNotificationUpdateDescription": "A(z) „{0}” nevű egyéni vezérlő frissítése",
- "claimProviderNotificationUpdateFailedDescription": "A(z) „{0}” nevű egyéni vezérlő frissítése sikertelen. Próbálkozzon újra később.",
- "claimProviderNotificationUpdateFailedTitle": "Nem sikerült frissíteni az egyéni vezérlőt",
- "claimProviderNotificationUpdateSuccessDescription": "A(z) „{0}” nevű egyéni vezérlő frissítve",
- "claimProviderNotificationUpdateSuccessTitle": "A(z) {0} hálózat frissítve",
- "claimProviderNotificationUpdateTitle": "A(z) {0} hálózat frissítése",
- "claimProviderValidationAppIdInvalid": "Az „AppId” értéke érvénytelen. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationClientIdMissing": "Az adatokból hiányzik a „ClientId” érték. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationControlClaimsRequestedMissing": "A „Control” elem nem tartalmaz „ClaimsRequested” értéket. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "A „ClaimsRequested” elem nem tartalmaz „Type” értéket. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationControlIdAlreadyExists": "A „Control” elem „Id” értéke már létezik. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationControlIdMissing": "A „Control” elem nem tartalmaz „Id” értéket. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "A „Control” elem „Id” értéke nem távolítható el, mert meglévő szabályzat hivatkozik rá. Távolítsa el a szabályzatból előbb.",
- "claimProviderValidationControlIdTooManyControls": "A Control tulajdonság túl sok vezérlőelemet tartalmaz. Tekintse át, majd próbálkozzon újra.",
- "claimProviderValidationControlIdValueReserved": "A „Control” elem „Id” értéke fenntartott kulcsszó, használjon más azonosítót.",
- "claimProviderValidationControlNameAlreadyExists": "A „Control” elem „Name” értéke már létezik. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationControlNameMissing": "A „Control” nem tartalmaz „Name” értéket. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationControlsMissing": "Az adatokból hiányzik a „Controls” érték. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationDiscoveryUrlMissing": "Az adatokból hiányzik a „DiscoveryUrl” érték. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationInvalid": "A megadott adatok érvénytelenek. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationInvalidJsonDefinition": "Nem lehet menteni az egyéni vezérlőt. Tekintse át a JSON-szöveget, és próbálkozzon újra.",
- "claimProviderValidationNameAlreadyExists": "A „Name” érték már létezik. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationNameMissing": "Az adatokból hiányzik a „Name” érték. Tekintse át, és próbálkozzon újra.",
- "claimProviderValidationUnknown": "A megadott adatok ellenőrzése közben ismeretlen hiba történt. Tekintse át, és próbálkozzon újra.",
- "claimProvidersNone": "Nincs egyéni vezérlő",
- "claimProvidersSearchPlaceholder": "Keressen vezérlőket.",
- "classicPoilcyFilterTitle": "Megjelenítés",
- "classicPolicyAllPlatforms": "Összes platform",
- "classicPolicyClientAppBrowserAndNative": "Böngésző, mobilalkalmazások és asztali ügyfelek",
- "classicPolicyCloudAppTitle": "Felhőalkalmazás",
- "classicPolicyControlAllow": "Engedélyezés",
- "classicPolicyControlBlock": "Blokk",
- "classicPolicyControlBlockWhenNotAtWork": "Hozzáférés letiltása a munkahelyen kívül",
- "classicPolicyControlRequireCompliantDevice": "Megfelelő eszköz megkövetelése",
- "classicPolicyControlRequireDomainJoinedDevice": "Tartományhoz csatlakoztatott eszköz megkövetelése",
- "classicPolicyControlRequireMfa": "Többtényezős hitelesítés megkövetelése",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Többtényezős hitelesítés megkövetelése a munkahelyen kívül",
- "classicPolicyDeleteCommand": "Törlés",
- "classicPolicyDeleteFailTitle": "Nem sikerült törölni a klasszikus szabályzatot",
- "classicPolicyDeleteInProgressTitle": "Klasszikus szabályzat törlése",
- "classicPolicyDeleteSuccessTitle": "Klasszikus szabályzat törölve",
- "classicPolicyDetailBladeTitle": "Részletek",
- "classicPolicyDisableCommand": "Letiltás",
- "classicPolicyDisableConfirmation": "Biztosan letiltja a(z) {0} szabályzatot? Ez a művelet nem vonható vissza.",
- "classicPolicyDisableFailDescription": "Nem sikerült letiltani a(z) {0} szabályzatot",
- "classicPolicyDisableFailTitle": "Nem sikerült letiltani a klasszikus szabályzatot",
- "classicPolicyDisableInProgressDescription": "A(z) {0} szabályzat letiltása",
- "classicPolicyDisableInProgressTitle": "Klasszikus szabályzat letiltása",
- "classicPolicyDisableSuccessDescription": "A(z) {0} szabályzat letiltása sikerült",
- "classicPolicyDisableSuccessTitle": "Klasszikus szabályzat letiltva",
- "classicPolicyEasSupportedPlatforms": "Az Exchange ActiveSync által támogatott platformok",
- "classicPolicyEasUnsupportedPlatforms": "Az Exchange ActiveSync által nem támogatott platformok",
- "classicPolicyExcludedPlatformsTitle": "Kizárt eszközplatformok",
- "classicPolicyFilterAll": "Minden szabályzat",
- "classicPolicyFilterDisabled": "Letiltott szabályzatok",
- "classicPolicyFilterEnabled": "Engedélyezett szabályzatok",
- "classicPolicyIncludeExcludeMembersDescription": "Egyes csoportok kizárásával több fázisban telepítheti át a szabályzatokat.",
- "classicPolicyIncludeExcludeMembersTitle": "Csoportok belefoglalása vagy kizárása",
- "classicPolicyIncludedPlatformsTitle": "Befoglalt eszközplatformok",
- "classicPolicyManualMigrationMessage": "A szabályzatot manuálisan kell áttelepíteni.",
- "classicPolicyMigrateCommand": "Áttelepítés",
- "classicPolicyMigrateConfirmation": "Biztosan áttelepíti a(z) {0} szabályzatot? A szabályzatot csak egyszer lehet áttelepíteni.",
- "classicPolicyMigrateFailDescription": "Nem sikerült áttelepíteni a(z) {0} szabályzatot",
- "classicPolicyMigrateFailTitle": "Nem sikerült áttelepíteni a klasszikus szabályzatot",
- "classicPolicyMigrateInProgressDescription": "A(z) {0} szabályzat áttelepítése",
- "classicPolicyMigrateInProgressTitle": "Klasszikus szabályzat áttelepítése",
- "classicPolicyMigrateRecommendText": "Ajánlás: Végezzen áttelepítést az új Azure Portal szabályzataira.",
- "classicPolicyMigrateSuccessTitle": "A klasszikus szabályzat áttelepítése sikerült",
- "classicPolicyMigratedSuccessDescription": "Ez a klasszikus szabályzat mostantól kezelhető a Szabályzatok pontban.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "A klasszikus szabályzatot {0} új szabályzat formájában telepíti át a rendszer. Az új szabályzatok a Szabályzatok pontban kezelhetők.",
- "classicPolicyNoEditPermissionMsg": "Nincs engedélye a szabályzat szerkesztéséhez. Csak a globális és a biztonsági rendszergazdák módosíthatja a szabályzatot. További információért kattintson ide.",
- "classicPolicySaveFailDescription": "Nem sikerült menteni a(z) {0} szabályzatot",
- "classicPolicySaveFailTitle": "Nem sikerült menteni a klasszikus szabályzatot",
- "classicPolicySaveInProgressDescription": "A(z) {0} szabályzat mentése",
- "classicPolicySaveInProgressTitle": "Klasszikus szabályzat mentése",
- "classicPolicySaveSuccessDescription": "A(z) {0} szabályzat mentése sikerült",
- "classicPolicySaveSuccessTitle": "Klasszikus szabályzat mentve",
- "clientAppBladeLegacyInfoBanner": "Az örökölt hitelesítés használata jelenleg nem támogatott",
- "clientAppBladeLegacyUpsellBanner": "A nem támogatott ügyfélalkalmazások letiltása (Előzetes verzió)",
- "clientAppBladeTitle": "Ügyfélalkalmazások",
- "clientAppDescription": "Válassza ki az ügyfélalkalmazásokat, melyekre érvényes lesz a házirend",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Az Exchange ActiveSync jelenleg semmilyen más feltételt nem támogat",
- "clientAppLearnMore": "A felhasználói hozzáférés vezérlésével megcélozhat olyan ügyfélalkalmazásokat, amelyek nem használnak modern hitelesítést.",
- "clientAppLegacyHeader": "Örökölt hitelesítési ügyfelek",
- "clientAppMobileDesktop": "Mobilalkalmazások és asztali ügyfelek",
- "clientAppModernHeader": "Modern hitelesítési ügyfelek",
- "clientAppOnlySupportedPlatforms": "Házirend alkalmazása csak a támogatott platformokra",
- "clientAppSelectSpecificClientApps": "Ügyfélalkalmazások kijelölése",
- "clientAppWebBrowser": "Böngésző",
- "clientAppsSelectedLabel": "{0} belefoglalva",
- "clientTypeBrowser": "Böngésző",
- "clientTypeEas": "Exchange ActiveSync-ügyfelek",
- "clientTypeEasInfo": "Csak örökölt hitelesítést használó Exchange ActiveSync-kliensek.",
- "clientTypeModernAuth": "Modern hitelesítési ügyfelek",
- "clientTypeOtherClients": "Egyéb ügyfelek",
- "clientTypeOtherClientsInfo": "Ez vonatkozik a régebbi Office-kliensekre és egyéb e-mail-protokollokra (POP, IMAP, SMTP stb.). [További információ][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "A szabályzatban konfigurált {0} felhőalkalmazás törlődött a könyvtárból, de ez a szabályzat más alkalmazásait nem érinti. A szabályzat alkalmazás szakaszának legközelebbi frissítésekor a törölt alkalmazások automatikusan el lesznek távolítva.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Az összes Microsoft-alkalmazás",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "A Microsoft felhőalapú, asztali és mobilalkalmazásainak engedélyezése (Előzetes verzió)",
- "cloudappsSelectionBladeAllCloudapps": "Minden felhőalkalmazás",
- "cloudappsSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő felhőalkalmazásokat",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Kizárt felhőalkalmazások kiválasztása",
- "cloudappsSelectionBladeIncludeDescription": "Válassza ki a felhőalkalmazásokat, melyekre érvényes lesz a házirend",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Kijelölés",
- "cloudappsSelectionBladeSelectedCloudapps": "Alkalmazások kiválasztása",
- "cloudappsSelectorInfoBallonText": "Azok a szolgáltatások, amelyekhez a felhasználó munkavégzés céljából hozzáfér. Példa: Salesforce",
- "cloudappsSelectorPluralExcluded": "{0} alkalmazás kihagyva",
- "cloudappsSelectorPluralIncluded": "{0} alkalmazás belefoglalva",
- "cloudappsSelectorSingularExcluded": "1 alkalmazás kihagyva",
- "cloudappsSelectorSingularIncluded": "1 alkalmazás belefoglalva",
- "cloudappsSelectorUserPlural": "{0} alkalmazás",
- "cloudappsSelectorUserSingular": "1 alkalmazás",
- "conditionLabelMulti": "{0} kijelölt feltétel",
- "conditionLabelOne": "1 kijelölt feltétel",
- "conditionalAccessBladeTitle": "Feltételes hozzáférés",
- "conditionsNotSelectedLabel": "Nincs konfigurálva",
- "conditionsReqMfaReauthSet": "Néhány beállítás nem érhető el, mert jelenleg a „Többtényezős hitelesítés megkövetelése“ engedély és a „Bejelentkezési gyakoriság minden alkalommal“ munkamenet-vezérlő van kiválasztva",
- "conditionsReqPwSet": "Néhány lehetőség nem érhető el, mert jelenleg a Jelszómódosítás megkövetelése engedély van kiválasztva",
- "configureCasText": "Cloud App Security konfigurálása",
- "configureCustomControlsText": "Egyéni szabályzat konfigurálása",
- "controlLabelMulti": "{0} kijelölt vezérlő",
- "controlLabelOne": "1 kijelölt vezérlő",
- "controlValidatorText": "Jelöljön ki legalább egy vezérlőt",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "További információ a megfelelő eszközök megköveteléséről.",
- "controlsDeviceComplianceInfoBubble": "Az eszköznek Intune-kompatibilisnek kell lennie. Ha az eszköz nem megfelelő, a rendszer kérni fogja a felhasználót, hogy tegye megfelelővé az eszközt.",
- "controlsDomainJoinedAriaLabel": "További információ a Microsoft Entrához csatlakoztatott hibrid eszközök megköveteléséről.",
- "controlsDomainJoinedInfoBubble": "Az eszközöknek hibrid Microsoft Entrához kell csatlakozniuk.",
- "controlsMamAriaLabel": "További információ a jóváhagyott ügyfélalkalmazások megköveteléséről.",
- "controlsMamInfoBubble": "Az eszköznek a következő jóváhagyott ügyfélalkalmazásokat kell használnia.",
- "controlsMfaInfoBubble": "A felhasználónak további biztonság követelményeket kell teljesítenie, például telefonhívás, szöveg",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "További információ a szabályzattal védett alkalmazások megköveteléséről.",
- "controlsRequireCompliantAppInfoBubble": "Az eszköznek szabályzat által védett alkalmazásokat kell használnia.",
- "controlsRequirePasswordResetAriaLabel": "További információ a jelszómódosítás megköveteléséről.",
- "controlsRequirePasswordResetInfoBubble": "Jelszómódosítás megkövetelése a felhasználói kockázat csökkentése érdekében. Ehhez a beállításhoz többtényezős hitelesítés is szükséges. Más vezérlők nem használhatók.",
- "countriesRadiobuttonInfoBalloonContent": "A felhasználó IP-címe határozza meg, hogy az adott bejelentkezés mely országból/régióból történik.",
- "createNewVpnCert": "Új tanúsítvány",
- "createdTimeLabel": "Létrehozás időpontja",
- "customRoleLabel": "Egyéni szerepkörök (nem támogatott)",
- "dateRangeTypeLabel": "Dátumtartomány",
- "daysOfWeekPlaceholderText": "Szűrés a hét napjai szerint",
- "daysOfWeekTypeLabel": "A hét napjai",
- "deletePolicyNoLicenseText": "Most már törölheti ezt a szabályzatot. A törlés után már nem fogja tudni újból létrehozni, amíg nem rendelkezik a szükséges licencekkel.",
- "descriptionContentForControlsAndOr": "Több vezérlő esetén",
- "devicePlatform": "Eszközplatform",
- "devicePlatformConditionHelpDescription": "Szabályzat alkalmazása a kiválasztott eszközplatformokra.\n[További információ][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} belefoglalva",
- "devicePlatformIncludeExclude": "{0} és {1} kizárva",
- "devicePlatformNoSelectionError": "Egyes eszközplatformok esetén ki kell választani egy alárendelt elemet.",
- "devicePlatformsNone": "Egyik sem",
- "deviceSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő platformokat",
- "deviceSelectionBladeIncludeDescription": "Válassza ki a házirend hatálya alá tartozó eszközplatformokat",
- "deviceStateAll": "Az összes eszköz állapota",
- "deviceStateCompliant": "Eszköz megjelölve megfelelőként",
- "deviceStateCompliantInfoContent": "Az Intune-kompatibilis eszközök kimaradnak a szabályzat kiértékeléséből, így például ha a szabályzat letiltja a hozzáférést, akkor az összes eszközt le fogja tiltani, kivéve azokat, amelyek Intune-kompatibilisek.",
- "deviceStateConditionConfigureInfoContent": "Szabályzat konfigurálása eszközállapot alapján",
- "deviceStateConditionSelectorInfoContent": "Annak meghatározása, hogy az eszköz, amelyről a felhasználó bejelentkezik, hibrid Microsoft Entrához csatlakozó, vagy pedig megfelelőként megjelölt.\n Ez elavult, helyette használja a következőt: {1}.",
- "deviceStateConditionSelectorLabel": "Eszköz állapota (elavult)",
- "deviceStateDomainJoined": "Az eszköz a hibrid Microsoft Entrához csatlakoztatva",
- "deviceStateDomainJoinedInfoContent": "A hibrid Microsoft Entrához csatlakozó eszközök kimaradnak a szabályzat kiértékeléséből, így ha például a szabályzat letiltja a hozzáférést, akkor az összes eszközt le fogja tiltani, kivéve azokat, amelyek a hibrid Microsoft Entrához vannak csatlakoztatva.",
- "deviceStateDomainJoinedInfoLinkText": "További információ.",
- "deviceStateExcludeDescription": "Válassza ki az eszközök szabályzatból való kizárásához használt eszközállapot-feltételt.",
- "deviceStateIncludeAndExcludeOneLabel": "{0}, a következő kizárásával: {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0}, a következők kizárásával: {1}, {2}",
- "directoryRoleInfoContent": "Szabályzat hozzárendelése a beépített címtárszerepkörökhöz.",
- "directoryRolesLabel": "Címtári szerepkörök",
- "discardbutton": "Elvetés",
- "downloadDefaultFileName": "IP-címtartományok",
- "downloadExampleFileName": "Példa",
- "downloadExampleHeader": "Ez egy példafájl, amely bemutatja, hogy milyen fajta adatok használhatók érvényesen. A # karakterrel kezdődő sorokat figyelmen kívül hagyja a rendszer.",
- "duplicate": "Duplikálás",
- "duplicatePolicyName": "{0} MÁSOLÁSA",
- "endDatePickerLabel": "Vége",
- "endTimePickerLabel": "Befejezés időpontja",
- "enterCountryText": "A rendszer párban értékeli ki az IP-címet és az országot/régiót. Válassza ki az országot.",
- "enterIpText": "A rendszer párban értékeli ki az IP-címet és az országot/régiót. Adja meg az IP-címet.",
- "enterUserText": "Nincs megadva felhasználó. Adjon meg egy felhasználót.",
- "evaluationResult": "Értékelés eredménye",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync csak a támogatott platformokkal",
- "excludeAllTrustedLocationSelectorText": "minden megbízható hely",
- "featureRequiresP2": "Ehhez a funkcióhoz Microsoft Entra ID P2-licenc szükséges.",
- "friday": "péntek",
- "grantControls": "Engedélyezési vezérlők",
- "gridNetworkTrusted": "Megbízható",
- "gridPolicyCreatedDateTime": "Létrehozás dátuma",
- "gridPolicyEnabled": "Engedélyezve",
- "gridPolicyModifiedDateTime": "Módosítás dátuma",
- "gridPolicyName": "Házirend neve",
- "gridPolicyState": "Állapot",
- "groupSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő csoportokat",
- "groupSelectionBladeExcludedSelectorTitle": "Kizárt csoportok kiválasztása",
- "groupSelectionBladeSelect": "Csoportok kiválasztása",
- "groupSelectorInfoBallonText": "A szabályzat hatálya alá tartozó csoportok a címtárban. Példa: Próbacsoport",
- "groupsSelectionBladeTitle": "Csoportok",
- "helpCommonScenariosText": "Szeretné megismerni a leggyakoribb alkalmazási helyzeteket?",
- "helpCondition1": "Ha bármely felhasználó a vállalati hálózaton kívüli helyről csatlakozik",
- "helpCondition2": "Ha a Vezetők csoport felhasználói bejelentkeznek",
- "helpConditionsTitle": "Feltételek",
- "helpControl1": "Többtényezős hitelesítéssel kell bejelentkezniük",
- "helpControl2": "Intune-kompatibilis vagy tartományhoz csatlakoztatott eszközt kell használniuk",
- "helpControlsTitle": "Szabályzók",
- "helpIntroText": "A feltételes hozzáférés lehetővé teszi, hogy meghatározott feltételek teljesülése esetén hozzáférési követelményeket léptessen érvénybe. Az alábbi példák ezt szemléltetik",
- "helpIntroTitle": "Mi a Feltételes hozzáférés?",
- "helpLearnMoreText": "További tudnivalók a Feltételes hozzáférésről",
- "helpStartStep1": "Hozza létre első szabályzatát a + Új szabályzat elemre kattintva",
- "helpStartStep2": "Adja meg a szabályzat feltételeit és szabályzóit",
- "helpStartStep3": "Ha elkészült, ne felejtse el kiválasztani a Szabályzat engedélyezése és a Létrehozás lehetőséget",
- "helpStartTitle": "Első lépések",
- "highRisk": "Nagy",
- "includeAndExcludeAppsTextFormat": "Belefoglalás: {0}. Kizárás: {1}.",
- "includeAppsTextFormat": "Belefoglalás: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Az ismeretlen területek olyan IP-címek, melyeket nem lehet országhoz/régióhoz hozzárendelni.",
- "includeUnknownAreasCheckboxLabel": "Ismeretlen területek belefoglalása",
- "infoCommandLabel": "Információ",
- "invalidCertDuration": "A tanúsítvány érvényességi ideje érvénytelen",
- "invalidIpAddress": "Az értéknek érvényes IP-címnek kell lennie",
- "invalidReAuthSignInRiskOptionSelected": "Ha a „Bejelentkezés gyakorisága” munkamenet-vezérlő „Minden alkalommal” értékű, a „Nincs kockázat” beállítás nem választható ki a „Bejelentkezési kockázat” feltételvezérlőben.",
- "invalidUriErrorMsg": "Érvényes URI azonosítót adjon meg. Példa: uri:contoso.com:acr ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Az összes betöltése",
- "loading": "Betöltés…",
- "locationConfigureNamedLocationsText": "Minden megbízható hely konfigurálása",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "A hely neve túl hosszú, legfeljebb 256 karakter lehet",
- "locationSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő helyeket",
- "locationSelectionBladeIncludeDescription": "Válassza ki a házirend hatálya alá tartozó helyeket",
- "locationsAllLocationsLabel": "Bármely hely",
- "locationsAllNamedLocationsLabel": "Minden megbízható IP-cím",
- "locationsAllPrivateLinksLabel": "A bérlő összes privát kapcsolata",
- "locationsIncludeExcludeLabel": "{0} és minden megbízható IP-cím kizárása",
- "locationsSelectedPrivateLinksLabel": "Kiválasztott privát kapcsolatok",
- "lowRisk": "Kicsi",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "A feltételes hozzáférési szabályzatok kezeléséhez a szervezetnek P1 vagy P2 szintű Microsoft Entrára van szüksége.",
- "manageSecurityDefaultsAriaLabel": "Javasolt biztonsági beállítások kezelése.",
- "markAsTrustedCheckboxInfoBalloonContent": "A megbízható helyről való bejelentkezés csökkenti az adott felhasználó bejelentkezési kockázatát. A helyet csak akkor jelölje meg megbízhatóként, ha tudja, hogy a megadott IP-címtartományok használata megalapozott és hihető a szervezetben.",
- "markAsTrustedCheckboxLabel": "Megjelölés megbízható helyként",
- "mediumRisk": "Közepes",
- "memberSelectionCommandRemove": "Eltávolítás",
- "menuItemClaimProviderControls": "Egyéni vezérlők (Előzetes verzió)",
- "menuItemClassicPolicies": "Klasszikus szabályzatok",
- "menuItemInsightsAndReporting": "Betekintések és jelentéskészítés",
- "menuItemManage": "Kezelés",
- "menuItemNamedLocationsPreview": "Nevesített helyek (előzetes verzió)",
- "menuItemNamedNetworks": "Nevesített helyek",
- "menuItemPolicies": "Házirendek",
- "menuItemTermsOfUse": "Használati feltételek",
- "modifiedTimeLabel": "Módosítás ideje",
- "monday": "hétfő",
- "nameLabel": "Név",
- "namedLocationCountryInfoBanner": "Csak az IPv4-címek vannak leképezve országokra/régiókra. Az IPv6-címek az ismeretlen országok/régiók között szerepelnek.",
- "namedLocationTypeCountry": "Országok/régiók",
- "namedLocationTypeLabel": "Hely megadása az alábbi használatával:",
- "namedLocationUpsellBanner": "Ez a nézet elavult. Váltson az új és továbbfejlesztett Nevesített helyek nézetre.",
- "namedLocationsHelpDescription": "A Microsoft Entra ID biztonsági jelentései nevesített helyeket használnak az álpozitív találatok és a Microsoft Entra feltételes hozzáférési szabályzatai számának csökkentésére.\n[További információ][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Új IP-címtartomány hozzáadása (példa: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "Legalább egy országot/régiót ki kell választania",
- "namedNetworkDeleteCommand": "Törlés",
- "namedNetworkDeleteDescription": "Biztos, hogy törli a(z) {0} hálózatot? Ez a művelet nem vonható vissza.",
- "namedNetworkDeleteTitle": "Biztos benne?",
- "namedNetworkDownloadIpRange": "Letöltés",
- "namedNetworkInvalidRange": "Az értéknek érvényes IP-címtartománynak kell lennie.",
- "namedNetworkIpRangeNeeded": "Legalább egy érvényes IP-címtartomány szükséges",
- "namedNetworkIpRangesDescriptionContent": "A szervezet IP-címtartományainak konfigurálása",
- "namedNetworkIpRangesTab": "IP-címtartományok",
- "namedNetworkListAdd": "Új hely",
- "namedNetworkListConfigureTrustedIps": "Többtényezős hitelesítés megbízható IP-címeinek konfigurálása",
- "namedNetworkNameDescription": "Példa: Budapesti iroda",
- "namedNetworkNameInvalid": "A megadott név érvénytelen.",
- "namedNetworkNameRequired": "A hely nevét kötelező megadni.",
- "namedNetworkNoIpRanges": "Nincsenek IP-címtartományok",
- "namedNetworkNotificationCreateDescription": "A(z) {0} nevű hely létrehozása",
- "namedNetworkNotificationCreateFailedDescription": "Nem sikerült létrehozni a(z) {0} nevű helyet. Később próbálkozzon újra.",
- "namedNetworkNotificationCreateFailedTitle": "Nem sikerült létrehozni a helyet",
- "namedNetworkNotificationCreateSuccessDescription": "A(z) {0} nevű hely létrehozva",
- "namedNetworkNotificationCreateSuccessTitle": "Hálózat ({0}) létrehozva",
- "namedNetworkNotificationCreateTitle": "Hálózat ({0}) létrehozása",
- "namedNetworkNotificationDeleteDescription": "A(z) {0} nevű hely törlése",
- "namedNetworkNotificationDeleteFailedDescription": "Nem sikerült törölni a(z) {0} nevű helyet. Később próbálkozzon újra.",
- "namedNetworkNotificationDeleteFailedTitle": "Nem sikerült törölni a helyet",
- "namedNetworkNotificationDeleteSuccessDescription": "A(z) {0} nevű hely törölve",
- "namedNetworkNotificationDeleteSuccessTitle": "A(z) {0} hálózat törölve",
- "namedNetworkNotificationDeleteTitle": "A(z) {0} törlése",
- "namedNetworkNotificationUpdateDescription": "A(z) {0} nevű hely frissítése",
- "namedNetworkNotificationUpdateFailedDescription": "Nem sikerült frissíteni a(z) {0} nevű helyet. Később próbálkozzon újra.",
- "namedNetworkNotificationUpdateFailedTitle": "Nem sikerült frissíteni a helyet",
- "namedNetworkNotificationUpdateSuccessDescription": "A(z) {0} nevű hely frissítve",
- "namedNetworkNotificationUpdateSuccessTitle": "A(z) {0} hálózat frissítve",
- "namedNetworkNotificationUpdateTitle": "A(z) {0} hálózat frissítése",
- "namedNetworkSearchPlaceholder": "Helyek keresése.",
- "namedNetworkUploadFailedDescription": "Hiba történt a feltöltött fájl elemzése közben. Ügyeljen arra, hogy olyan egyszerű szöveges fájlt töltsön fel, amelynek minden sora CIDR formátumú.",
- "namedNetworkUploadFailedTitle": "Nem sikerült elemezni a(z) „{0}” fájlt.",
- "namedNetworkUploadInProgressDescription": "Folyamatban van a(z) {0} fájl érvényes CIDR-értékeinek elemzése.",
- "namedNetworkUploadInProgressTitle": "Elemzés – {0}",
- "namedNetworkUploadInvalidDescription": "A(z) {0} túl nagy méretű, vagy érvénytelen a formátuma.",
- "namedNetworkUploadInvalidTitle": "{0} – érvénytelen",
- "namedNetworkUploadIpRange": "Feltöltés",
- "namedNetworkUploadSuccessDescription": "{0} sor elemezve, amelyből {1} helytelen formátumú, {2} pedig kihagyva.",
- "namedNetworkUploadSuccessTitle": "Elemzés befejezve – {0}",
- "namedNetworksAdd": "Új nevesített hely",
- "namedNetworksConditionHelpDescription": "Felhasználói hozzáférés szabályozása a fizikai hely alapján.\n[További információ][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} és {1} kizárva",
- "namedNetworksHelpDescription": "A Microsoft Entra ID biztonsági jelentései nevesített helyeket használnak az álpozitív találatok és a Microsoft Entra feltételes hozzáférési szabályzatai számának csökkentésére.\n[További információ][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} belefoglalva",
- "namedNetworksNone": "Nem találhatók nevesített helyek.",
- "namedNetworksTitle": "Helyek konfigurálása",
- "namednetworkExceedingSizeErrorBladeTitle": "Hibaüzenet részletei",
- "namednetworkExceedingSizeErrorDetailText": "További részletekért kattintson ide.",
- "namednetworkExceedingSizeErrorMessage": "Túllépte a nevesített helyek esetében maximálisan engedélyezett tárhelyet. Próbálkozzon újra egy rövidebb listával. További részletek megtekintéséhez kattintson ide.",
- "needMfaSecondary": "A „Többtényezős hitelesítés megkövetelése“ beállítást akkor kell kiválasztani, ha a „Bejelentkezési gyakoriság minden alkalommal“ lehetőséget a „Csak másodlagos hitelesítési módszerek“ opcióval együtt választja ki.",
- "needMfaSpecificApps": "A „Bejelentkezés gyakorisága minden alkalommal” munkamenet-vezérlő a „Többtényezős hitelesítés megkövetelése” engedélyezési vezérlő használatát igényli, ha kifejezetten támogatott alkalmazások lettek kiválasztva.",
- "newCertName": "új tanúsítvány",
- "noAttributePermissionsError": "Nincs megfelelő jogosultsága a szabályzat létrehozásához vagy frissítéséhez. Dinamikus szűrők hozzáadásához vagy szerkesztéséhez attribútumdefiníció-olvasói szerepkör szükséges.",
- "noPolicyRowMessage": "Nem találhatók házirendek",
- "noSPSelected": "Nincs kiválasztva szolgáltatásnév",
- "noUpdatePermissionMessage": "Nincs jogosultsága a beállítások frissítéséhez. Kérjen hozzáférést a globális rendszergazdától.",
- "noUserSelected": "Nincs kijelölve felhasználó",
- "noneRisk": "Nincs kockázat",
- "office365Description": "Ezen alkalmazások közé tartozik egyebek mellett a Microsoft Flow, a Microsoft Forms, a Microsoft Teams, az Office 365 Exchange Online, az Office 365 SharePoint Online és az Office 365 Yammer.",
- "office365InfoBox": "A kiválasztott alkalmazások közül legalább egy az Office 365 része. Ajánlott inkább az Office 365-alkalmazásra vonatkozó szabályzatot beállítani.",
- "oneUserSelected": "1 felhasználó van kiválasztva",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Csak a globális rendszergazdák menthetik ezt a szabályzatot.",
- "or": "{0} VAGY {1} ",
- "pickerDoneCommand": "Kész",
- "policiesBladeAdPremiumUpsellBannerText": "Hozzon létre saját szabályzatokat, és olyan konkrét feltételeket célozzon meg velük, mint például a felhőbeli alkalmazások, a bejelentkezési kockázat vagy a prémium szintű Microsoft Entra ID-t használó eszközplatformok.",
- "policiesBladeTitle": "Házirendek",
- "policiesBladeTitleWithAppName": "Szabályzatok: {0}",
- "policiesDisabledBannerText": "A szabályzatok létrehozása és szerkesztése tiltott a csatolt bejelentkezési attribútummal rendelkező alkalmazások esetében.",
- "policiesHitMaxLimitStatusBarMessage": "Elérte a bérlőhöz tartozó szabályzatok maximális számát. Mielőtt további szabályzatokat hozna létre, töröljön néhányat.",
- "policyAssignmentsSection": "Hozzárendelések",
- "policyBlockAllInfoBox": "A konfigurált szabályzat letiltja az összes felhasználót, ezért nem támogatott. Tekintse át a hozzárendeléseket és a vezérlőket. Ha szeretné menteni a szabályzatot, zárja ki az aktuális felhasználót ({0}).",
- "policyCloudAppsDisplayTextAllApp": "Minden alkalmazás",
- "policyCloudAppsLabel": "Felhőalkalmazások",
- "policyConditionClientAppDescription": "A felhasználó által a felhőalkalmazás elérésére használt szoftver. Példa: Böngésző",
- "policyConditionClientAppV2Description": "A felhasználó által a felhőalkalmazás elérésére használt szoftver. Példa: Böngésző",
- "policyConditionDevicePlatform": "Eszközplatformok",
- "policyConditionDevicePlatformDescription": "A platform, amelyről a felhasználó bejelentkezik. Példa: 'iOS'",
- "policyConditionLocation": "Helyszínek",
- "policyConditionLocationDescription": "A hely (az IP-címtartomány használatával megállapítva), ahonnan a felhasználó bejelentkezik",
- "policyConditionLocationPreview": "Helyek (Előzetes verzió)",
- "policyConditionSigninRisk": "Bejelentkezési kockázat",
- "policyConditionSigninRiskDescription": "Annak valószínűsége, hogy a bejelentkezés nem a felhasználó részéről történt. A kockázati szint lehet magas, közepes vagy alacsony. A beállításhoz Microsoft Entra ID P2-licenc szükséges.",
- "policyConditionUserRisk": "Felhasználói kockázat",
- "policyConditionUserRiskDescription": "A szabályzat érvényesítéséhez szükséges felhasználói kockázati szintek konfigurálása",
- "policyConditioniClientApp": "Ügyfélalkalmazások",
- "policyControlAllowAccessDisplayedName": "Hozzáférés biztosítása",
- "policyControlAuthenticationStrengthDisplayedName": "Hitelesítés erősségének megkövetelése (Előzetes verzió)",
- "policyControlBladeTitle": "Hozzáférés",
- "policyControlBlockAccessDisplayedName": "Hozzáférés letiltása",
- "policyControlCompliantDeviceDisplayedName": "Eszköz megfelelőként való megjelölésének megkövetelése",
- "policyControlContentDescription": "Hozzáférési engedélyek kényszerítésének vezérlése hozzáférés letiltása vagy engedélyezése érdekében.",
- "policyControlInfoBallonText": "A hozzáférés letiltása vagy a megadásához teljesítendő további követelmények kijelölése",
- "policyControlMfaChallengeDisplayedName": "Többtényezős hitelesítés megkövetelése",
- "policyControlRequireCompliantAppDisplayedName": "Alkalmazásvédelmi szabályzat megkövetelése",
- "policyControlRequireDomainJoinedDisplayedName": "A hibrid Microsoft Entrához csatlakoztatott eszköz megkövetelése",
- "policyControlRequireMamDisplayedName": "Jóváhagyott ügyfélalkalmazás megkövetelése",
- "policyControlRequiredPasswordChangeDisplayedName": "Jelszómódosítás megkövetelése",
- "policyControlSelectAuthStrength": "Hitelesítés erősségének megkövetelése",
- "policyControlsNoControlsSelected": "0 kijelölt vezérlő",
- "policyControlsSection": "Hozzáférés-szabályozás",
- "policyCreatBladeTitle": "Új",
- "policyCreateButton": "Létrehozás",
- "policyCreateFailedMessage": "Hiba: {0}",
- "policyCreateFailedTitle": "Nem sikerült létrehozni a(z) {0} szabályzatot",
- "policyCreateInProgressTitle": "Hálózat ({0}) létrehozása",
- "policyCreateSuccessMessage": "A(z) {0} létrehozása sikerült. A szabályzat néhány perc múlva érvénybe lép, amennyiben a Házirend engedélyezése beállítás Bekapcsolva értékre van állítva.",
- "policyCreateSuccessTitle": "A(z) {0} szabályzat létrehozása sikerült",
- "policyDeleteConfirmation": "Biztos, hogy törli a(z) {0} hálózatot? Ez a művelet nem vonható vissza.",
- "policyDeleteFailTitle": "Nem sikerült törölni a(z) {0} bérlői védjegyezést",
- "policyDeleteInProgressTitle": "A(z) {0} törlése",
- "policyDeleteSuccessTitle": "A(z) {0} törlése sikerült",
- "policyEnforceLabel": "Házirend engedélyezése",
- "policyErrorCannotSetSigninRisk": "Nincs engedélye menteni a szabályzatot bejelentkezési kockázati feltétellel.",
- "policyErrorNoPermission": "Nem jogosult a szabályzat mentésére. Forduljon a globális rendszergazdához.",
- "policyErrorUnknown": "Hiba történt. Próbálkozzon újra később.",
- "policyFallbackWarningMessage": "Nem sikerült létrehozni vagy frissíteni a(z) {0} szabályzatot az MS Graph használatával, ami miatt a rendszer a helyettes alkalmazásra, az AD Graph-ra váltott. Kérjük, vizsgálja meg a következő forgatókönyvet, mert valószínűleg hiba történt az MS Graph nem kompatibilis állapottal rendelkező szabályzatvégpontjának meghívásakor.",
- "policyFallbackWarningTitle": "A(z) {0} létrehozása vagy frissítése részben sikeres volt",
- "policyNameCannotBeEmpty": "A szabályzat neve nem lehet üres",
- "policyNameDevice": "Eszközszabályzat",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Mobilalkalmazás-kezelési szabályzat",
- "policyNameMfaLocation": "Többtényezős hitelesítésre és helymeghatározásra vonatkozó szabályzat",
- "policyNamePlaceholderText": "Példa: Eszközmegfelelőségi alkalmazásszabályzat",
- "policyNameTooLongError": "A szabályzat neve túl hosszú, legfeljebb 256 karakter lehet",
- "policyOff": "Kikapcsolva",
- "policyOn": "Bekapcsolva",
- "policyReportOnly": "Csak jelentés",
- "policyReviewSection": "Áttekintés",
- "policySaveButton": "Mentés",
- "policyStatusIconDescription": "A szabályzat engedélyezve van",
- "policyStatusIconEnabled": "Engedélyezett állapot ikonja",
- "policyTemplateName1": "Alkalmazás által kényszerített korlátozások alkalmazása a(z) {0} alkalmazáshoz való böngészőalapú hozzáférésre",
- "policyTemplateName2": "A(z) {0} hozzáférésének engedélyezése csak kezelt eszközökön",
- "policyTemplateName3": "A folyamatos hozzáférés-kiértékelési beállításokból átmigrált szabályzat",
- "policyTriggerRiskSpecific": "Adott kockázati szint kijelölése",
- "policyTriggersInfoBalloonText": "Azon feltételek, amelyek teljesülésekor érvénybe lép a szabályzat. Példa: 'hely'",
- "policyTriggersNoConditionsSelected": "0 kijelölt feltétel",
- "policyTriggersSelectorLabel": "Feltételek",
- "policyUpdateFailedMessage": "Hiba: {0}",
- "policyUpdateFailedTitle": "Nem sikerült frissíteni a(z) {0} alkalmazást",
- "policyUpdateInProgressTitle": "{0} frissítése",
- "policyUpdateSuccessMessage": "A(z) {0} frissítése megtörtént. A szabályzat néhány perc múlva érvénybe lép, amennyiben a Házirend engedélyezése beállítás Bekapcsolva értékre van állítva.",
- "policyUpdateSuccessTitle": "A(z) {0} alkalmazás frissítése sikeresen megtörtént",
- "primaryCol": "Elsődleges",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "Csak jelentés üzemmód: a rendszer bejelentkezéskor kiértékeli és naplózza a szabályzatokat, de ez nincs hatással a felhasználókra.",
- "requireAllControlsText": "Az összes kijelölt vezérlő megkövetelése",
- "requireCompliantDevice": "Megfelelő eszköz megkövetelése",
- "requireDomainJoined": "Tartományhoz csatlakoztatott eszköz megkövetelése",
- "requireGrantReauth": "A „bejelentkezési gyakoriság minden alkalommal“ munkamenet-vezérlő megköveteli a „többtényezős hitelesítés megkövetelése“ vagy a „jelszómódosítás megkövetelése“ engedélyezési vezérlőt, ha a „Minden felhőalkalmazás“ beállítás van kiválasztva",
- "requireMFA": "Többtényezős hitelesítés megkövetelése",
- "requireMfaReauth": "A „bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „többtényezős hitelesítés megkövetelése” engedélyezési vezérlőt a „bejelentkezési kockázat” esetében",
- "requireOneControlText": "Az egyik kijelölt vezérlő megkövetelése",
- "requirePasswordChangeReauth": "A „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „Jelszómódosítás megkövetelése” engedélyezési vezérlőt a „felhasználói kockázat” esetében",
- "requireRiskReauth": "A „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő megköveteli a „Felhasználói kockázat” vagy a „Bejelentkezési kockázat” munkamenet-vezérlőt, ha az „Összes felhőalkalmazás” beállítás van kiválasztva.",
- "requireRiskReauthRiskNotEnabled": "A „Bejelentkezés gyakorisága minden alkalommal” munkamenet-vezérlő nem érhető el, ha a „Minden felhőalkalmazás” beállítás van kiválasztva.",
- "requireRiskReauthSignInOnly": "A „Bejelentkezés gyakorisága minden alkalommal” munkamenet-vezérlő megköveteli a „Bejelentkezési kockázat” munkamenet-vezérlő meglétét, ha a „Minden felhőalkalmazás” beállítás van kiválasztva.",
- "requireRiskReauthUserOnly": "A „Bejelentkezés gyakorisága minden alkalommal” munkamenet-vezérlő megköveteli a „Felhasználói kockázat” munkamenet-vezérlő meglétét, ha a „Minden felhőalkalmazás” beállítás van kiválasztva.",
- "resetFilters": "Szűrők alaphelyzetbe állítása",
- "sPRequired": "A szolgáltatásnév megadása kötelező",
- "sPSelectorInfoBalloon": "A tesztelni kívánt felhasználó vagy szolgáltatásnév",
- "saturday": "szombat",
- "searchTextTooLongError": "A keresett szöveg túl hosszú. Legfeljebb 256 karaktert tartalmazhat.",
- "securityDefaultsPolicyName": "Javasolt biztonsági beállítások",
- "securityDefaultsTextMessage": "A javasolt biztonsági beállításokat le kell tiltani egy feltételes hozzáférési szabályzat engedélyezéséhez.",
- "securityDefaultsUpdateInProgressText": "A javasolt biztonsági beállítások frissítése folyamatban van, várjon egy kicsit, és próbálkozzon újra.",
- "securityDefaultsWarningMessage": "Úgy tűnik, hogy a cég biztonsági konfigurációit szeretné kezelni. Ez nagyszerű! A feltételes hozzáférési szabályzat engedélyezéséhez először {0}le kell tiltania a javasolt biztonsági beállításokat{1}.",
- "selectDevicePlatforms": "Eszközplatformok kiválasztása",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Helyek kiválasztása",
- "selectedSP": "Kiválasztott szolgáltatásnév",
- "servicePrincipalBladeExcludedSelectorTitle": "Kizárt alkalmazáspéldányok kiválasztása",
- "servicePrincipalBladeIncludedSelectorTitle": "Alkalmazáspéldányok kiválasztása",
- "servicePrincipalDataGridAria": "Elérhető szolgáltatásnevek listája",
- "servicePrincipalDropDownLabel": "Mire vonatkozik ez a szabályzat?",
- "servicePrincipalInfoBox": "Bizonyos feltételek a szabályzat-hozzárendelésben megadott {0} választás miatt nem érhetők el",
- "servicePrincipalRadioAll": "Az összes saját tulajdonú szolgáltatásnév",
- "servicePrincipalRadioSelect": "Szolgáltatásnév választása",
- "servicePrincipalSelectionsAria": "Kijelölt szolgáltatásnevek táblázata",
- "servicePrincipalSelectorAria": "Választott szolgáltatásnevek listája",
- "servicePrincipalSelectorMultiple": "{0} szolgáltatásnév kijelölve",
- "servicePrincipalSelectorSingle": "1 szolgáltatásnév kijelölve",
- "servicePrincipalSpecificExc": "Megadott szolgáltatásnevek kizárva",
- "servicePrincipalSpecificInc": "Megadott szolgáltatásnevekre érvényes",
- "servicePrincipals": "Szolgáltatásnevek",
- "sessionControlBladeTitle": "Munkamenet",
- "sessionControlDescriptionContent": "A hozzáférések munkamenet-vezérlő alapú szabályozásával korlátozott felületeket tehet elérhetővé adott felhőalkalmazásokban.",
- "sessionControlDisableInfo": "Ez a vezérlő csak a támogatott alkalmazásokkal működik együtt. A felhőalapú alkalmazások közül jelenleg csak az Office 365, az Exchange Online és a SharePoint Online támogatja az alkalmazás által kikényszerített korlátozásokat. További információért kattintson ide.",
- "sessionControlInfoBallonText": "A munkamenet-vezérlők a funkciók korlátozását teszik lehetővé a felhőalkalmazásokban.",
- "sessionControls": "Munkamenet-vezérlők",
- "sessionControlsAppEnforcedLabel": "Alkalmazás által kényszerített korlátozások használata",
- "sessionControlsCasLabel": "Feltételes hozzáférést biztosító alkalmazás-vezérlő használata",
- "sessionControlsSecureSignInLabel": "Jogkivonatkötés megkövetelése",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} belefoglalva",
- "signinRiskReauth": "A „Bejelentkezési kockázat“ feltételt akkor kell kiválasztani, ha a „Többtényezős hitelesítés megkövetelése“ engedély és a „Bejelentkezési gyakoriság minden alkalommal“ munkamenet-vezérlő van kiválasztva.",
- "signinRiskTriggerDescriptionContent": "A bejelentkezési kockázat szintjének kiválasztása",
- "singleTenantServicePrincipalInfoBallonText": "A szabályzat csak a szervezet tulajdonában álló egybérlős szolgáltatásnevekre vonatkozik. További információért kattintson ide ",
- "specificSigninRiskLevelsOption": "Konkrét bejelentkezési kockázati szintek kiválasztása",
- "specificUsersExcluded": "a megadott felhasználók kizárásával",
- "specificUsersIncluded": "A megadott felhasználók belefoglalásával",
- "specificUsersIncludedAndExcluded": "Kizárt és befoglalt felhasználók",
- "startDatePickerLabel": "Kezdés",
- "startFreeTrial": "Ingyenes próba megkezdése",
- "startTimePickerLabel": "Kezdő időpont",
- "sunday": "vasárnap",
- "testButton": "What If",
- "thumbprintCol": "Ujjlenyomat",
- "thursday": "csütörtök",
- "timeConditionAllTimesLabel": "Bármikor",
- "timeConditionIntroText": "Állítsa be az időpontokat, amelyre érvényes lesz a szabályzat",
- "timeConditionSelectorInfoBallonContent": "A felhasználó bejelentkezésének időpontja. Példa: „Szerda 9:00 – 17:00 (PST)”",
- "timeConditionSelectorLabel": "Időpont (Előzetes verzió)",
- "timeConditionSpecificLabel": "Megadott időpontok",
- "timeSelectorAllTimesText": "Bármikor",
- "timeSelectorSpecificTimesText": "Megadott konfigurált időpontok",
- "timeZoneDropdownInfoBalloonContent": "Válassza ki az időzónát, amely meghatározza az időtartományt. A szabályzat az összes időzóna felhasználóira érvényes. Például az adott felhasználóra vonatkozó „Szerda 9:00 – 17:00” érték egy másik időzónában lévő felhasználó számára „Szerda 10:00 – 18:00” lehet.",
- "timeZoneDropdownLabel": "Időzóna",
- "timeZoneDropdownPlaceholderText": "Válasszon időzónát",
- "tooManyPoliciesDescription": "Jelenleg csak az első 50 házirend van megjelenítve. Az összes házirend megtekintéséhez kattintson ide",
- "tooManyPoliciesTitle": "Több mint 50 házirend található",
- "trustedLocationStatusIconDescription": "A hely megbízható",
- "trustedLocationStatusIconEnabled": "Megbízható állapotikon",
- "tuesday": "kedd",
- "uploadInBadState": "Nem sikerült feltölteni a megadott fájlt.",
- "upsellAppsDescription": "Többtényezős hitelesítés megkövetelése a bizalmas alkalmazásokhoz minden esetben vagy csak a vállalati hálózaton kívülről.",
- "upsellAppsTitle": "Alkalmazások védelme",
- "upsellBannerText": "A szolgáltatás használatához szerezze be az ingyenes Prémium szintű próbaverziót",
- "upsellDataDescription": "Annak megkövetelése a vállalati erőforrások elérésének engedélyezéséhez, hogy az eszköz megfelelőként megjelölt vagy hibrid Microsoft Entrához csatlakozó legyen.",
- "upsellDataTitle": "Adatok védelme",
- "upsellDescription": "A feltételes hozzáférés biztosítja a céges adatok biztonságához szükséges vezérlési és védelmi funkciókat, és olyan környezetet kínál, amely lehetővé teszi a felhasználóknak, hogy minden eszközön a leghatékonyabban dolgozzanak. Lehetőséget nyújt például a vállalati hálózaton kívülről történő hozzáférés korlátozására vagy a hozzáférés azon eszközökre való korlátozására, amelyek megfelelnek a szabályzatok előírásainak.",
- "upsellRiskDescription": "Többtényezős hitelesítés megkövetelése a Microsoft gépi tanulási rendszere által észlelt kockázati események esetében.",
- "upsellRiskTitle": "Védelem a kockázatok ellen",
- "upsellTitle": "Feltételes hozzáférés",
- "upsellWhyTitle": "Miért érdemes Feltételes hozzáférést használni?",
- "userAppNoneOption": "Egyik sem",
- "userNamePlaceholderText": "Írja be a felhasználónevet",
- "userNotSetSeletorLabel": "0 kijelölt felhasználó és csoport",
- "userOnlySelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő felhasználókat",
- "userOrGroupSelectionCountDiffBannerText": "A szabályzatban konfigurált {0} törlődött a könyvtárból, de ez a szabályzat más felhasználóit és csoportjait nem érinti. A szabályzat legközelebbi frissítésekor a törölt felhasználók és/vagy alkalmazások automatikusan el lesznek távolítva.",
- "userOrSPNotSetSelectorLabel": "Nincs kiválasztva felhasználó vagy számítási feladathoz tartozó identitás",
- "userOrSPSelectionBladeTitle": "Felhasználók vagy számítási feladatok identitásai",
- "userOrSPSelectorInfoBallonText": "A szabályzat hatálya alá tartozó címtárbeli identitások, beleértve a felhasználókat, csoportokat és szolgáltatásneveket",
- "userRequired": "Felhasználó megadása kötelező",
- "userRiskErrorBox": "A Felhasználói kockázat feltételt kell kiválasztani, ha a Jelszómódosítás megkövetelése engedély van kiválasztva",
- "userRiskReauth": "A „Felhasználói kockázat” feltételt kell kiválasztani a „Bejelentkezési kockázat” helyett, ha a „Jelszómódosítás megkövetelése” engedély és a „Bejelentkezési gyakoriság minden alkalommal” munkamenet-vezérlő van kiválasztva",
- "userSPRequired": "A felhasználó vagy szolgáltatásnév megadása kötelező",
- "userSPSelectorTitle": "Felhasználó vagy számítási feladat identitása",
- "userSelectionBladeAllUsersAndGroups": "Minden felhasználó és csoport",
- "userSelectionBladeExcludeDescription": "Válassza ki a szabályzat alól mentesítendő felhasználókat és csoportokat",
- "userSelectionBladeExcludeTabTitle": "Kizárás",
- "userSelectionBladeExcludedSelectorTitle": "Kizárt felhasználók és csoportok kijelölése",
- "userSelectionBladeIncludeDescription": "Adja meg azokat a felhasználókat, akikre érvényes lesz a szabályzat",
- "userSelectionBladeIncludeTabTitle": "Belefoglalás",
- "userSelectionBladeIncludedSelectorTitle": "Kijelölés",
- "userSelectionBladeSelectUsers": "Felhasználók kijelölése",
- "userSelectionBladeSelectedUsers": "Felhasználók és csoportok kijelölése",
- "userSelectionBladeTitle": "Felhasználók és csoportok",
- "userSelectorBladeTitle": "Felhasználók",
- "userSelectorExcluded": "{0} kizárva",
- "userSelectorGroupPlural": "{0} csoport",
- "userSelectorGroupSingular": "1 csoport",
- "userSelectorIncluded": "{0} belefoglalva",
- "userSelectorInfoBallonText": "A szabályzat hatálya alá tartozó felhasználók és csoportok a címtárban. Példa: 'Próbacsoport'",
- "userSelectorSelected": "{0} kijelölve",
- "userSelectorTitle": "Felhasználó",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0}-felhasználók",
- "userSelectorUserSingular": "1 felhasználó",
- "userSelectorWithExclusion": "{0} és {1}",
- "usersGroupsLabel": "Felhasználók és csoportok",
- "viewApprovedAppsText": "A jóváhagyott ügyfélalkalmazások listájának megtekintése",
- "viewCompliantAppsText": "A szabályzat által védett ügyfélalkalmazások listájának megtekintése",
- "viewPolicyInformation": "Házirend adatainak megtekintése",
- "vpnBladeTitle": "VPN-kapcsolat",
- "vpnCertCreateFailedMessage": "Hiba: {0}",
- "vpnCertCreateFailedTitle": "A(z) {0} létrehozása nem sikerült",
- "vpnCertCreateInProgressTitle": "{0} létrehozása",
- "vpnCertCreateSuccessMessage": "A(z) {0} tanúsítvány létrehozása sikerült.",
- "vpnCertCreateSuccessTitle": "A(z) {0} létrehozása sikerült",
- "vpnCertNoRowsMessage": "Nem találhatók VPN-tanúsítványok",
- "vpnCertUpdateFailedMessage": "Hiba: {0}",
- "vpnCertUpdateFailedTitle": "Nem sikerült frissíteni a(z) {0} alkalmazást",
- "vpnCertUpdateInProgressTitle": "{0} frissítése",
- "vpnCertUpdateSuccessMessage": "A(z) {0} tanúsítvány frissítése sikerült.",
- "vpnCertUpdateSuccessTitle": "A(z) {0} alkalmazás frissítése sikeresen megtörtént",
- "vpnFeatureInfo": "A VPN-kapcsolatokkal és a Feltételes hozzáféréssel kapcsolatos további információért kattintson ide.",
- "vpnFeatureWarning": "Ha létrehoznak egy VPN-tanúsítványt a portálon, a Microsoft Entra ID azonnal megkezdi a rövid élettartamú tanúsítványok kiadását a VPN-ügyfélnek a tanúsítvány használatával. A VPN-ügyfél hitelesítő adatainak ellenőrzésével kapcsolatos problémák elkerülése érdekében kritikus fontosságú a VPN-tanúsítvány VPN-kiszolgálón való azonnali üzembe helyezése.",
- "vpnMenuText": "VPN-kapcsolat",
- "vpncertDropdownDefaultOption": "Időtartam",
- "vpncertDropdownInfoBalloonContent": "Az érvényességi idő kiválasztása a létrehozni kívánt tanúsítványhoz",
- "vpncertDropdownLabel": "Érvényességi idő kiválasztása",
- "vpncertDropdownOneyearOption": "1 év",
- "vpncertDropdownThreeyearOption": "3 év",
- "vpncertDropdownTwoyearOption": "2 év",
- "wednesday": "szerda",
- "whatIfCountry": "Ország/régió",
- "whatIfCountryInfo": "Az az ország/régió, amelyből a felhasználó bejelentkezik.",
- "whatIfDevicePlatformInfo": "Az eszközplatform, melyről a felhasználó bejelentkezik.",
- "whatIfEnterIpAddress": "Adja meg az IP-címet (példa: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "Érvénytelen IP-cím van megadva.",
- "whatIfIpAddress": "IP-cím",
- "whatIfIpAddressInfo": "Az IP-cím, ahonnan a felhasználó bejelentkezik.",
- "whatIfIpCountryInfoBoxText": "IP-cím vagy ország/régió használata esetén mindkét mezőt ki kell tölteni, és az értéküknek helyesen meg kell felelnie egymásnak.",
- "whatIfSelectCountry": "Ország/régió kiválasztása...",
- "whatIfSelectDevicePlatform": "Válasszon eszközplatformot...",
- "whatIfSelectPrivateLink": "Privát kapcsolat kiválasztása...",
- "whatIfSelectSignInRisk": "Válasszon bejelentkezési kockázatot...",
- "whatIfSignInRisk": "Bejelentkezési kockázat",
- "whatIfSignInRiskInfo": "A bejelentkezéshez társított kockázati szint",
- "whatIfUnknownAreas": "Ismeretlen területek",
- "windows365InfoBox": "A Windows 365 kiválasztása hatással lesz a kapcsolatokra a felhőalapú PC-khez és az Azure Virtual Desktop-munkamenetgazdákhoz. További információért kattintson ide.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Számítási feladatok identitásai (előzetes verzió)",
- "workloadIdentitiesLicenseText": "A szabályzat szerkesztéséhez prémium P1 vagy P2 szintű számításifeladat-identitásokra van szükség.",
- "workloadIdentity": "Számításifeladat-identitás"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Nem támogatott",
- "supportEnding": "A támogatás vége",
- "supported": "Támogatott"
- }
- },
- "SecurityTemplate": {
- "aSR": "Támadási felület csökkentése",
- "accountProtection": "Fiókvédelem",
- "allDevices": "Minden eszköz",
- "antivirus": "Víruskereső",
- "antivirusReporting": "Víruskereső-jelentéskészítés (előzetes verzió)",
- "conditionalAccess": "Feltételes hozzáférés",
- "deviceCompliance": "Eszköz megfelelősége",
- "diskEncryption": "Lemeztitkosítás",
- "eDR": "Végpontészlelés és -válasz",
- "ePM": "Végponti jogosultságok kezelése",
- "firewall": "Tűzfal",
- "helpSupport": "Súgó és támogatás",
- "setup": "Telepítés",
- "wdapt": "Microsoft Defender for Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Sikertelen",
- "hardReboot": "Hardveres újraindítás",
- "retry": "Újra",
- "softReboot": "Szoftveres újraindítás",
- "success": "Sikeres"
- },
- "Columns": {
- "codeType": "Kód típusa",
- "returnCode": "Visszatérési kód"
- },
- "bladeTitle": "Visszatérési kódok",
- "gridAriaLabel": "Visszatérési kódok",
- "header": "Adja meg a visszatérési kódokat a telepítés utáni viselkedés jelzéséhez:",
- "onAddAnnounceMessage": "Visszatérési kód – {0} hozzáadott elem, összesen: {1}",
- "onDeleteSuccess": "A visszatérési {0} kód sikeresen törölve",
- "returnCodeAlreadyUsedValidation": "A visszatérési kód már használatban van.",
- "returnCodeMustBeIntegerValidation": "A visszatérési kódnak egész számnak kell lennie.",
- "returnCodeShouldBeAtLeast": "A visszatérési kódnak legalább {0} értéknek kell lennie.",
- "returnCodeShouldBeAtMost": "A visszatérési kódnak legfeljebb {0} értéknek kell lennie.",
- "selectorLabel": "Visszatérési kódok"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "arab",
- "bulgarian": "bolgár",
- "chineseSimplified": "kínai (egyszerűsített)",
- "chineseTraditional": "kínai (hagyományos)",
- "croatian": "horvát",
- "czech": "cseh",
- "danish": "dán",
- "dutch": "holland",
- "englishUK": "angol (Egyesült Királyság)",
- "englishUS": "angol (Egyesült Államok)",
- "estonian": "észt",
- "finnish": "finn",
- "frenchCanada": "francia (Kanada)",
- "frenchFrance": "francia (Franciaország)",
- "german": "német",
- "greek": "görög",
- "hebrew": "héber",
- "hungarian": "magyar",
- "italian": "olasz",
- "japanese": "japán",
- "korean": "koreai",
- "latvian": "lett",
- "lithuanian": "litván",
- "norwegian": "norvég (bokmål)",
- "polish": "lengyel",
- "portugueseBrazil": "portugál (brazíliai)",
- "portuguesePortugal": "portugál (portugáliai)",
- "romanian": "román",
- "russian": "orosz",
- "serbian": "szerb",
- "slovak": "szlovák",
- "slovenian": "szlovén",
- "spanishMexico": "spanyol (Mexikó)",
- "spanishSpain": "spanyol (spanyolországi)",
- "swedish": "svéd",
- "thai": "Thaiföld",
- "turkish": "török",
- "ukrainian": "ukrán"
- },
- "Summary": {
- "placeholder": "Válasszon ki egy értesítő üzenetet a bal oldalon a tartalom előnézetének megtekintéséhez."
- },
- "companyContact": "Kapcsolattartási adatok megjelenítése",
- "companyLogo": "Cég emblémájának megjelenítése",
- "companyName": "Cégnév megjelenítése",
- "createEditDescription": "Értesítő üzenetek sablonjainak létrehozása és szerkesztése.",
- "createMessage": "Üzenet létrehozása",
- "deviceDetails": "Eszköz részleteinek megjelenítése",
- "deviceDetailsInfoBox": "Ez a beállítás alapértelmezés szerint ki van kapcsolva, mivel az eszköz adatainak lekérése késleltetheti az e-mail-értesítések fogadását.",
- "editImpactInfo": "Az értesítésiüzenet-sablon módosítása a sablont használó összes szabályzatra hatással lesz.",
- "editMessage": "Üzenet szerkesztése",
- "email": "e-mail",
- "emailFooterTitle": "E-mail lábléce",
- "emailHeaderFooterInfo": "Az e-mail-értesítések e-mail fejlécének és láblécének beállításai a Végpontkezelő bérlői felügyeleti csomópontjának testreszabási beállításain alapulnak.",
- "emailHeaderTitle": "E-mail-fejléc",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Testreszabási beállítások konfigurálása",
- "formSubTitle": "Értesítő e-mailek létrehozása és módosítása",
- "headerFooterSettingsTab": "Élőfej és élőláb beállításai",
- "imgPreview": "Kép előnézete",
- "infotext": "Válasszon értesítő üzenetet. Új értesítéseket az Eszközmegfelelőség beállítása tevékenységprofil Kezelés szakaszának Értesítések részén hozhat létre.",
- "iwLink": "Céges portál webhelyhivatkozásának megjelenítése",
- "listEmpty": "Nincsenek üzenetsablonok.",
- "listEmptySelectOnly": "Nincsenek üzenetsablonok. Új értesítéseket az Eszközmegfelelőség beállítása tevékenységprofil Kezelés szakaszának Értesítések részén hozhat létre.",
- "listSubTitle": "Értesítő üzenetek sablonjainak listája",
- "listTitle": "Értesítőüzenet-sablonok",
- "localizedNotificationMessageTemplates": "Honosított értesítési üzenet sablonjai",
- "messageAssigned": "Az üzenetsablont nem lehet törölni, mert egy vagy több megfelelőségi szabályzat használja.",
- "messageCapitalized": "Értesítési üzenet sablonja",
- "messageLowercase": "értesítési üzenet sablonja",
- "missingDefaultError": "Válasszon egy alapértelmezett sablont",
- "notificationMessageTemplates": "Értesítőüzenet-sablonok",
- "rowValidationError": "Legalább egy üzenetsablon szükséges",
- "selectDescription": "Válasszon értesítő üzenetet. Új értesítést az Eszközmegfelelőség beállítása lap Kezelés szakaszának Értesítések részén hozhat létre.",
- "tenantValueText": "Bérlői érték",
- "testEmailLabel": "Előnézeti e-mail küldése",
- "localeLabel": "Területi beállítás",
- "isDefaultLocale": "Alapértelmezett"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "A kényszerített újraindításig hátralévő napok száma"
- },
"Description": {
"label": "Leírás"
},
+ "FeatureDeploymentSettings": {
+ "header": "Funkciótelepítési beállítások"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "A funkció nem képes eszközök alacsonyabb verzióra váltására.",
+ "label": "A telepíteni kívánt funkciófrissítés"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Végleges csoport rendelkezésre állása"
+ },
+ "GradualRolloutInterval": {
+ "label": "Csoportok közötti napok"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Első csoport rendelkezésre állása"
+ },
"Name": {
"label": "Név"
},
- "QualityUpdateRelease": {
- "label": "Minőségi frissítések gyorsított telepítése, ha az eszköz operációsrendszer-verziója a következőnél régebbi:"
- },
- "bladeTitle": "Minőségi frissítések Windows 10-es és újabb verziókhoz (előzetes verzió)",
- "loadError": "A betöltés sikertelen!"
+ "OptionalUpdate": {
+ "label": "Szükséges vagy választható frissítés"
+ },
+ "RolloutOptions": {
+ "label": "Kibocsátási beállítások"
+ },
+ "RolloutSettings": {
+ "header": "Mikor szeretné elérhetővé tenni a frissítést Windows Update-en belül?"
+ },
+ "ScopeSettings": {
+ "header": "Hatókörcímkék konfigurálása ehhez a szabályzathoz."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "Az első elérhető dátum"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Letiltva",
+ "enabled": "Engedélyezve",
+ "infoBalloonContent": "Annak szabályozása, hogy a legújabb Windows 10 funkciófrissítés telepíthető-e a Windows 11-re nem jogosult eszközökre",
+ "label": "Ha egy eszköz nem jogosult futtatni a Windows 11-et, telepítse a legújabb Windows 10 funkciófrissítést",
+ "notApplicable": "Nem alkalmazható",
+ "summaryLabel": "A Windows 10 telepítése olyan eszközökön, amelyek nem jogosultak a Windows 11 futtatására"
+ },
+ "bladeTitle": "Funkciófrissítés-telepítések",
+ "deploymentSettingsTitle": "Üzembe helyezési beállítások",
+ "loadError": "A betöltés nem sikerült",
+ "windows11EULA": "Ha kiválasztja ezt a funkciófrissítést az üzembe helyezéshez, azzal elfogadja, hogy az operációs rendszer egy eszközre való alkalmazásakor vagy (1) a megfelelő Windows-licencet vásárolta meg a mennyiségi licencelés keretében, vagy (2), hogy Ön felhatalmazást kapott a munkahelye vagy az intézménye nevében való kötelezettségvállalásra, és mint ilyen személy, elfogadja az itt található megfelelő Microsoft szoftverlicenc-szerződés feltételeit: {0}."
},
+ "Notifications": {
+ "deploymentSaved": "A(z) {0} mentése befejeződött.",
+ "newFeatureUpdateDeploymentCreated": "Az új szolgáltatásfrissítési telepítés létrejött."
+ },
"TabName": {
- "qualityUpdateSettings": "Beállítások"
+ "deploymentSettings": "Üzembe helyezési beállítások",
+ "groupAssignmentSettings": "Feladatok",
+ "scopeSettings": "Hatókörcímkék"
},
- "infoBoxText": "A jelenleg elérhető egyetlen dedikált minőségifrissítés-szabályozási lehetőség a Windows 10-es vagy újabb frissítési körök szabályzatán kívül a minőségi frissítések felgyorsítása azon eszközökön, amelyek esetében a javítási szint a megadott értéket nem érti el. A jövőben további szabályozási lehetőségek is elérhetők lesznek.",
- "licenseLearnMoreText": "További információ az előfeltételekről és a minőségi frissítési szabályzatokról.",
- "licenseWarningBoxText": "A minőségi frissítési szabályzatok létrehozásához meghatározott licencre van szükség.",
- "warningBoxText": "A szoftverfrissítések felgyorsításával csökkenthető a megfelelőség eléréséhez szükséges idő, azonban nagyobb hatással van a végfelhasználói termelékenységre. Jelentősen nagyobb eséllyel fordulhat elő újraindítás munkaidőben."
+ "gradualRolloutLicenseWarning": "Ehhez a képességhez meghatározott licencre van szükség.",
+ "gradualRolloutLicenseWarningEdit": "A képesség használata és konfigurálása addig lehetséges, amíg a szabályzat részét képezi annak mentésekor.",
+ "licenseLearnMoreText": "További információ az előfeltételekről és a funkciófrissítési szabályzatokról.",
+ "optionalUpdateWarning": "A választható lehetőség csak Windows 11-frissítésekhez érhető el",
+ "profileNameWarning": "A névnek rövidebbnek kell lennie 64 karakternél",
+ "specificLicensingRequired": "Néhány kiválasztott képességhez konkrét licenc szükséges."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64 bites",
- "thirtyTwoBit": "32 bites"
- },
- "TACSettings": {
- "edgeSettings": "Edge-konfigurációs beállítások",
- "edgeWindowsDataProtectionSettings": "Edge (Windows) adatvédelmi beállításai – előzetes verzió",
- "edgeWindowsSettings": "Edge (Windows) konfigurációs beállításai – előzetes verzió",
- "generalAppConfig": "Általános alkalmazáskonfiguráció",
- "generalSettings": "Általános konfigurációs beállítások",
- "outlookSMIMEConfig": "Az Outlook S/MIME-beállításai",
- "outlookSettings": "Outlook-konfigurációs beállítások",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Hálózati határ hozzáadása",
- "addNetworkBoundaryButton": "Hálózati határ hozzáadása...",
- "allowWindowsSearch": "A titkosított céges adatok és az áruházbeli alkalmazások keresésének engedélyezése a Windows Search szolgáltatás számára",
- "authoritativeIpRanges": "A vállalati IP-címtartományok listája mérvadó (nincs automatikus észlelés)",
- "authoritativeProxyServers": "A vállalati proxykiszolgálók listája mérvadó (nincs automatikus észlelés)",
- "boundaryType": "Határ típusa",
- "cloudResources": "Felhőerőforrások",
- "corporateIdentity": "Céges identitás",
- "dataRecoveryCert": "A titkosított adatok helyreállításának engedélyezéséhez töltsön fel egy adat-helyreállítási megbízotti (DRA-) tanúsítványt",
- "editNetworkBoundary": "Hálózati határ szerkesztése",
- "enrollmentState": "Regisztráció állapota",
- "iPv4Ranges": "IPv4-tartományok",
- "iPv6Ranges": "IPv6-tartományok",
- "internalProxyServers": "Belső proxykiszolgálók",
- "maxInactivityTime": "Az eszköz által inaktív állapotban eltöltött idő (percben), amelynek elteltével a PIN-kóddal vagy jelszóval feloldható zárolás bekapcsol",
- "maxPasswordAttempts": "Ennyi sikertelen hitelesítési kísérlet után lesz törölve az eszköz tartalma",
- "mdmDiscoveryUrl": "MDM-felderítési URL-cím",
- "mdmRequiredSettingsInfo": "Ez a szabályzat csak a Windows 10 évfordulós kiadására vagy újabb kiadásaira érvényes. A szabályzat a Windows Information Protection (WIP) segítségével biztosítja a védelmi funkciókat.",
- "minimumPinLength": "Adja meg a PIN kód minimális hosszát karakterben",
- "name": "Név",
- "networkBoundariesGridEmptyText": "Itt fog megjelenni minden hozzáadott hálózati határ",
- "networkBoundary": "Hálózathatár",
- "networkDomainNames": "Hálózati tartományok",
- "neutralResources": "Semleges erőforrások",
- "passportForWork": "A Vállalati Windows Hello használata a Windowsba való bejelentkezéshez",
- "pinExpiration": "Adja meg, hogy hány nap elteltével kérje a rendszer a PIN-kód megváltoztatását",
- "pinHistory": "Adja meg, hogy az adott felhasználói fiók korábbi PIN-kódjai hány kódig visszamenőleg ne legyenek újból felhasználhatók",
- "pinLowercaseLetters": "A Vállalati Windows Hello PIN-kódjában használandó kisbetűk konfigurálása",
- "pinSpecialCharacters": "A Vállalati Windows Hello PIN-kódjában használandó speciális karakterek konfigurálása",
- "pinUppercaseLetters": "A Vállalati Windows Hello PIN-kódjában használandó nagybetűk konfigurálása",
- "protectUnderLock": "Az alkalmazások céges adatokhoz való hozzáférésének megakadályozása, ha az eszköz zárolt állapotban van. Csak a Windows 10 Mobile rendszerre vonatkozik",
- "protectedDomainNames": "Védett tartományok",
- "proxyServers": "Proxykiszolgálók",
- "requireAppPin": "Az alkalmazás PIN-kódjának letiltása az eszköz PIN-kódjának kezelése esetén",
- "requiredSettings": "Kötelező beállítások",
- "requiredSettingsInfo": "A szabályzat eltávolítása vagy hatókörének módosítása a céges adatok titkosításának feloldásával jár.",
- "revokeOnMdmHandoff": "Védett adatokhoz való hozzáférés visszavonása, ha az eszközt regisztrálják az MDM-ben",
- "revokeOnUnenroll": "Titkosítási kulcsok visszavonása regisztráció törlésekor",
- "rmsTemplateForEdp": "Adja meg az Azure RMS-ben használandó sablonazonosítót",
- "showWipIcon": "Nagyvállalati adatvédelem ikonjának megjelenítése",
- "type": "Típus",
- "useRmsForWip": "Azure RMS használata a Windows Információvédelemhez",
- "value": "Érték",
- "weRequiredSettingsInfo": "Ez a szabályzat csak a Windows 10 évfordulós kiadására vagy újabb kiadásaira érvényes. A szabályzat a Windows Information Protection (WIP) és a Windows MAM segítségével biztosítja a védelmi funkciókat.",
- "wipProtectionMode": "Windows Information Protection módja",
- "withEnrollment": "Regisztrációval",
- "withoutEnrollment": "Regisztráció nélkül"
+ "Platform": {
+ "all": "Az összes",
+ "android": "Android-eszközadminisztrátor",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Közös",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS és Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Ismeretlen",
+ "unsupported": "Nem támogatott",
+ "windows": "Windows",
+ "windows10": "Windows 10 és újabb rendszerek",
+ "windows10CM": "Windows 10 és újabb (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 és újabb rendszerek",
+ "windows8And10": "Windows 8 és 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 és újabb rendszerek",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 és Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 és újabb (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows rendszerű számítógép"
+ },
+ "InstallIntent": {
+ "available": "Regisztrált eszközök esetében elérhető",
+ "availableWithoutEnrollment": "Regisztrációval vagy anélkül is elérhető",
+ "required": "Kötelező",
+ "uninstall": "Eltávolítás"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Szűrő",
+ "noFilters": "Nincs"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Szerző",
- "template": "Sablon neve"
- },
- "Row": {
- "ariaLabel": "{1} oszlop {2} {0}. sora"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Kezdje elölről, és válassza ki a kívánt tulajdonságokat a rendelkezésre álló leltártulajdonságok könyvtárából"
- },
- "SettingsCatalog": {
- "subtitle": "Kezdje elölről, és válassza ki a kívánt beállításokat a rendelkezésre álló beállítások könyvtárából",
- "title": "Beállításkatalógus"
- },
- "Templates": {
- "subtitle": "A sablonok funkciók szerint rendszerezve tartalmazzák a beállítások csoportjait. Akkor használjon sablont, ha nem szeretné manuálisan létrehozni a szabályzatokat, vagy hozzáférést szeretne adni az eszközöknek a vállalati hálózatokhoz, például Wi-Fi- vagy VPN-hálózathoz",
- "title": "Sablonok"
- },
- "noData": "Nem találhatók szabályzatsablonok"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "A Project Online asztali ügyfele",
- "visioProRetail": "Visio Online 2. csomag"
- },
- "Countries": {
- "ae": "Egyesült Arab Emírségek",
- "ag": "Antigua és Barbuda",
- "ai": "Anguilla",
- "al": "Albánia",
- "am": "Örményország",
- "ao": "Angola",
- "ar": "Argentína",
- "at": "Ausztria",
- "au": "Ausztrália",
- "az": "Azerbajdzsán",
- "bb": "Barbados",
- "be": "Belgium",
- "bf": "Burkina Faso",
- "bg": "Bulgária",
- "bh": "Bahrein",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolívia",
- "br": "Brazília",
- "bs": "Bahama-szigetek",
- "bt": "Bhután",
- "bw": "Botswana",
- "by": "Belarusz",
- "bz": "Belize",
- "ca": "Kanada",
- "cg": "Kongói Köztársaság",
- "ch": "Svájc",
- "cl": "Chile",
- "cn": "Kína",
- "co": "Kolumbia",
- "cr": "Costa Rica",
- "cv": "Cabo Verde",
- "cy": "Ciprus",
- "cz": "Cseh Köztársaság",
- "de": "Németország",
- "dk": "Dánia",
- "dm": "Dominika",
- "do": "Dominikai Köztársaság",
- "dz": "Algéria",
- "ec": "Ecuador",
- "ee": "Észtország",
- "eg": "Egyiptom",
- "es": "Spanyolország",
- "fi": "Finnország",
- "fj": "Fidzsi-szigetek",
- "fm": "Mikronéziai Szövetséges Államok",
- "fr": "Franciaország",
- "gb": "Egyesült Királyság",
- "gd": "Grenada",
- "gh": "Ghána",
- "gm": "Gambia",
- "gr": "Görögország",
- "gt": "Guatemala",
- "gw": "Bissau-Guinea",
- "gy": "Guyana",
- "hk": "Hongkong KKT",
- "hn": "Honduras",
- "hr": "Horvátország",
- "hu": "Magyarország",
- "id": "Indonézia",
- "ie": "Írország",
- "il": "Izrael",
- "in": "India",
- "is": "Izland",
- "it": "Olaszország",
- "jm": "Jamaica",
- "jo": "Jordánia",
- "jp": "Japán",
- "ke": "Kenya",
- "kg": "Kirgizisztán",
- "kh": "Kambodzsa",
- "kn": "Saint Kitts és Nevis",
- "kr": "Koreai Köztársaság",
- "kw": "Kuvait",
- "ky": "Kajmán-szigetek",
- "kz": "Kazahsztán",
- "la": "Laoszi Népi Demokratikus köztársaság",
- "lb": "Libanon",
- "lc": "Saint Lucia",
- "lk": "Srí Lanka",
- "lr": "Libéria",
- "lt": "Litvánia",
- "lu": "Luxemburg",
- "lv": "Lettország",
- "md": "Moldovai Köztársaság",
- "mg": "Madagaszkár",
- "mk": "Észak-Macedónia",
- "ml": "Mali",
- "mn": "Mongólia",
- "mo": "Makao",
- "mr": "Mauritánia",
- "ms": "Montserrat",
- "mt": "Málta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Mexikó",
- "my": "Malajzia",
- "mz": "Mozambik",
- "na": "Namíbia",
- "ne": "Niger",
- "ng": "Nigéria",
- "ni": "Nicaragua",
- "nl": "Hollandia",
- "no": "Norvégia",
- "np": "Nepál",
- "nz": "Új-Zéland",
- "om": "Omán",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Pápua Új-Guinea",
- "ph": "Fülöp-szigetek",
- "pk": "Pakisztán",
- "pl": "Lengyelország",
- "pt": "Portugália",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Katar",
- "ro": "Románia",
- "ru": "Oroszország",
- "sa": "Szaúd-Arábia",
- "sb": "Salamon-szigetek",
- "sc": "Seychelle-szigetek",
- "se": "Svédország",
- "sg": "Szingapúr",
- "si": "Szlovénia",
- "sk": "Szlovákia",
- "sl": "Sierra Leone",
- "sn": "Szenegál",
- "sr": "Suriname",
- "st": "Sao Tome és Principe",
- "sv": "Salvador",
- "sz": "Szváziföld",
- "tc": "Turks- és Caicos-szigetek",
- "td": "Csád",
- "th": "Thaiföld",
- "tj": "Tádzsikisztán",
- "tm": "Türkmenisztán",
- "tn": "Tunézia",
- "tr": "Törökország",
- "tt": "Trinidad és Tobago",
- "tw": "Tajvan",
- "tz": "Tanzánia",
- "ua": "Ukrajna",
- "ug": "Uganda",
- "us": "Egyesült Államok",
- "uy": "Uruguay",
- "uz": "Üzbegisztán",
- "vc": "Saint Vincent és Grenadine-szigetek",
- "ve": "Venezuela",
- "vg": "Brit Virgin-szigetek",
- "vn": "Vietnam",
- "ye": "Jemen",
- "za": "Dél-Afrika",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Aktuális csatorna",
- "deferred": "Féléves vállalati csatorna",
- "firstReleaseCurrent": "Aktuális csatorna (előzetes verzió)",
- "firstReleaseDeferred": "Féléves vállalati csatorna (előzetes verzió)",
- "monthlyEnterprise": "Havi vállalati csatorna",
- "placeHolder": "Válasszon egyet"
- },
- "AppProtection": {
- "allAppTypes": "Célzás minden alkalmazástípusra",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Androidos munkahelyi profilban lévő alkalmazások",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Alkalmazások a Microsoft Entra megosztott módot használó dedikált Android Enterprise-eszközökön",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Androidos nyílt forráskódú projektben található alkalmazások társított felhasználóval",
- "appsOnAndroidOpenSourceProjectUserless": "Androidos nyílt forráskódú projektben található alkalmazások felhasználó nélkül",
- "appsOnIntuneManagedDevices": "Az Intune által felügyelt eszközökön lévő alkalmazások",
- "appsOnUnmanagedDevices": "A nem felügyelt eszközökön lévő alkalmazások",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Nem érhető el",
- "windows10PlatformLabel": "Windows 10 és újabb rendszerek",
- "withEnrollment": "Regisztrációval",
- "withoutEnrollment": "Regisztráció nélkül"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Beépített szerepkör",
- "customCloudPCRole": "Egyéni Windows 365-szerepkör",
- "customIntuneRole": "Egyéni Intune-szerepkör",
- "customRole": "Egyéni szerepkör"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "A(z) {0} egy vagy több szabályzatkészletben szerepel. A(z) {0} törlése után a továbbiakban nem tudja hozzárendelni ezeken a szabályzatkészleteken keresztül. Biztosan törli?",
- "contentWithError": "A(z) {0} egy vagy több szabályzatkészletben szerepelhet. A(z) {0} törlése után a továbbiakban nem tudja hozzárendelni ezeken a szabályzatkészleteken keresztül. Biztosan törli?",
- "header": "Biztosan törli ezt a korlátozást?"
- },
- "DeviceLimit": {
- "description": "Adja meg, hogy egy felhasználó legfeljebb hány eszközt léptethet be.",
- "header": "Eszközszámkorlátok",
- "info": "Megadják, hogy egy felhasználó hány eszközt léptethet be."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "1.0 vagy újabb szükséges.",
- "android": "Érvényes verziószámot adjon meg. Példák: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Érvényes verziószámot adjon meg. Példák: 5.0, 5.1.1",
- "iOS": "Érvényes verziószámot adjon meg. Példák: 9.0, 10.0, 9.0.2",
- "mac": "Érvényes verziószámot adjon meg. Példák: 10, 10.10, 10.10.1",
- "min": "A minimális verziószám nem lehet kisebb a következő verziószámnál: {0}",
- "minMax": "A minimális verziószám nem lehet nagyobb a maximális verziószámnál.",
- "windows": "10.0-s vagy újabb verziójúnak kell lennie. A 8.1-es eszközök engedélyezéséhez hagyja üresen a mezőt",
- "windowsMobile": "10.0-s vagy újabb verziójúnak kell lennie. A 8.1-es eszközök engedélyezéséhez hagyja üresen a mezőt"
- },
- "allPlatformsBlocked": "Minden eszközplatform blokkolva van. A platformkonfiguráció engedélyezéséhez engedélyezze a platformregisztrációt.",
- "blockManufacturerPlaceHolder": "Gyártó neve",
- "blockManufacturersHeader": "Letiltott gyártók",
- "cannotRestrict": "A korlátozás nem támogatott",
- "configurationDescription": "Adja meg azokat a platformkonfigurációs korlátozásokat, amelyeknek meg kell felelnie egy regisztrálandó eszköznek. Az eszközök regisztrálás utáni korlátozásához használjon megfelelőségi szabályzatokat. A verziókat főverzió.alverzió.buildszám formátumban definiálja. A verziókorlátozások csak a Céges portál alkalmazással regisztrált eszközökre vonatkoznak. Az Intune alapértelmezés szerint személyes tulajdonúként sorolja be az eszközöket. Az eszközök cégesként való besorolásához további műveletekre van szükség.",
- "configurationDescriptionLabel": "További információ a beléptetési korlátozások beállításáról",
- "configurations": "Platformok konfigurálása",
- "deviceManufacturer": "Eszköz gyártója",
- "header": "Eszköztípus-korlátozások",
- "info": "Megadják, hogy mely platformok, verziók és felügyeleti típusok regisztrálhatók.",
- "manufacturer": "Gyártó",
- "max": "Maximális",
- "maxVersion": "Maximális verzió",
- "min": "Min.",
- "minVersion": "Legalacsonyabb verzió",
- "newPlatforms": "Új platformokat engedélyezett. Fontolja meg a platformkonfigurációk frissítését.",
- "personal": "Személyes tulajdonú",
- "platform": "Platform",
- "platformDescription": "A következő platformok regisztrálását engedélyezheti. Csak azokat a platformokat tiltsa le, amelyeket nem fog támogatni. Az engedélyezett platformokhoz további regisztrációs korlátozások konfigurálhatók.",
- "platformSettings": "Platformbeállítások",
- "platforms": "Platformok kiválasztása",
- "platformsSelected": "{0} platform kijelölve",
- "type": "Típus",
- "versions": "verziók",
- "versionsRange": "Tartomány minimális és maximális értéke:",
- "windowsTooltip": "A regisztráció korlátozása a mobileszköz-kezelés segítségével. Ez a PC-s ügynök telepítését nem korlátozza. Csak a Windows 10 és Windows 11 verziók támogatottak. A Windows 8.1 engedélyezéséhez hagyja üresen a verzió mezőt."
- },
- "Priority": {
- "saved": "Sikeresen mentette a szoftverkorlátozási prioritásokat."
- },
- "Row": {
- "announce": "Prioritás: {0}, név: {1}, hozzárendelve: {2}"
- },
- "Table": {
- "deployed": "Üzembe helyezve",
- "name": "Név",
- "priority": "Prioritás"
- },
- "Type": {
- "limit": "Eszközszám-korlátozás szerkesztése",
- "type": "Eszköztípus-korlátozás"
- },
- "allUsers": "Minden felhasználó",
- "androidRestrictions": "Android-korlátozások",
- "create": "Korlátozás létrehozása",
- "defaultLimitDescription": "Ez a csoporttagságtól függetlenül az összes felhasználóra a legalacsonyabb prioritással alkalmazott alapértelmezett eszközszámkorlát.",
- "defaultTypeDescription": "Ez a csoporttagságtól függetlenül az összes felhasználóra a legalacsonyabb prioritással alkalmazott alapértelmezett eszköztípuskorlát.",
- "defaultWhfbDescription": "Ez a csoporttagságtól függetlenül az összes felhasználóra a legalacsonyabb prioritással alkalmazott alapértelmezett Vállalati Windows Hello-konfiguráció.",
- "deleteMessage": "Az érintett felhasználók a következő legmagasabb prioritású hozzárendelt korlát, illetve ha nincs más korlát hozzárendelve, az alapértelmezett korlát szerint korlátozva lesznek.",
- "deleteTitle": "Biztosan törli a(z) {0} korlátozást?",
- "descriptionHint": "Egy rövid bekezdés, amely leírja a korlátozás beállításai által meghatározott üzleti felhasználást vagy korlátozási szintet.",
- "edit": "Korlátozás szerkesztése",
- "info": "Az eszköznek meg kell felelnie a felhasználójához hozzárendelt legmagasabb prioritású regisztrációs korlátozásoknak. A prioritást az eszközkorlátozás húzásával módosíthatja. Az alapértelmezett korlátozások, amelyek az összes felhasználó esetében a legalacsonyabb prioritású korlátozások, a felhasználó nélküli regisztrációk szabályozására szolgálnak. Az alapértelmezett korlátozások szerkeszthetők, de nem törölhetők.",
- "iosRestrictions": "iOS-korlátozások",
- "mDM": "MDM",
- "macRestrictions": "macOS-korlátozások",
- "maxVersion": "Maximális verzió",
- "minVersion": "Minimális verzió",
- "nameHint": "Ez lesz a korlátozáskészlet azonosítása céljából megjelenített elsődleges attribútum.",
- "noAssignmentsStatusBar": "Rendeljen hozzá korlátozást legalább egy csoporthoz. Kattintson a Tulajdonságok elemre.",
- "nonAdminForbiddenCreateError": "Korlátozások létrehozásához, szerkesztéséhez vagy törléséhez Intune szolgáltatás- vagy globális rendszergazdának kell lennie.",
- "nonAdminForbiddenEdit": "A korlátozások szerkesztéséhez rendszergazdának kell lennie.",
- "notFound": "A korlátozás nem található. Lehet, hogy már törölték.",
- "personallyOwned": "Személyes tulajdonú eszközök",
- "restriction": "Korlátozás",
- "restrictionLowerCase": "korlátozást",
- "restrictionType": "Korlátozás típusa",
- "selectType": "Válassza ki a korlátozás típusát",
- "selectValidation": "Válasszon platformot",
- "typeHint": "Az eszköztulajdonságok korlátozására válassza az eszköztípuskorlátot. Az eszközök felhasználónkénti számának korlátozására válassza az eszközszámkorlátot.",
- "typeRequired": "A korlátozás típusának megadása kötelező.",
- "winPhoneRestrictions": "Windows Phone-korlátozások",
- "windowsECv1Info": "A régebbi regisztrációs korlátozások nem szerkeszthetők és nem módosíthatók, csak törölhetők.",
- "windowsECv2Info": "Húzással rangsorolhatja a regisztrációs korlátozásokat. Alább megtekintheti az alapértelmezett és az előre konfigurált korlátozásokat. Minden új regisztrációs korlátozás prioritása magasabb lesz, mint az alapértelmezett és az előre konfigurált korlátozások.",
- "windowsRestrictions": "Windows-korlátozások",
- "windowsRestrictionsPreview": "Szűrőalapú Windows-korlátozások (előzetes verzió)"
- },
- "InstallContextType": {
- "device": "Eszköz",
- "deviceContext": "Eszközkörnyezet",
- "user": "Felhasználó",
- "userContext": "Felhasználói környezet"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Leírás",
- "placeholder": "Adja meg a leírást"
- },
- "NameTextBox": {
- "label": "Név",
- "placeholder": "Név megadása"
- },
- "PublisherTextBox": {
- "label": "Közzétevő",
- "placeholder": "Közzétevő megadása"
- },
- "VersionTextBox": {
- "label": "Verzió"
- },
- "headerDescription": "Létrehozhat egy új egyéni szkriptcsomagot a saját észlelési és javítási szkriptjeiből."
- },
- "ScopeTags": {
- "headerDescription": "Jelöljön ki egy vagy több csoportot, amelyet hozzá kíván rendelni a szkriptcsomaghoz."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Észlelési szkript",
- "placeholder": "Bemeneti szkript szövege",
- "requiredValidationMessage": "Adja meg az észlelési szkriptet"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Szkriptaláírás ellenőrzésének kényszerítése"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Szkript futtatása a bejelentkezéshez használt hitelesítő adatokkal"
- },
- "RemediationScript": {
- "infoBox": "Ez a szkript csak észlelési módban fog futni, mivel nem található szervizelési szkript."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Szervizelési parancsfájl",
- "placeholder": "Bemeneti szkript szövege"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Szkript futtatása a 64 bites PowerShellben"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Érvénytelen szkript. A szkript érvénytelen karaktereket tartalmaz."
- },
- "headerDescription": "Létrehozhat egy egyéni szkriptcsomagot a saját szkriptjeiből. A szkriptek alapértelmezés szerint naponta futnak a hozzárendelt eszközökön.",
- "infoBox": "Ez a szkript írásvédett. Előfordulhat, hogy a szkript néhány beállítása le van tiltva."
- },
- "title": "Egyéni szkript létrehozása",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Intervallum",
- "time": "Dátum és idő"
- },
- "Interval": {
- "day": "Naponta ismétlődik",
- "days": "{0} naponta ismétlődik",
- "hour": "Óránként ismétlődik",
- "hours": "{0} óránként ismétlődik",
- "month": "Havonta ismétlődik",
- "months": "{0} havonta ismétlődik",
- "week": "Hetente ismétlődik",
- "weeks": "{0} hetente ismétlődik"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{1}, {0} (UTC)",
- "withDate": "{1}, {0}"
- }
- }
- },
- "Edit": {
- "title": "Szerkesztés – {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Engedélyezett URL-címek",
- "tooltip": "Adja meg azokat a webhelyeket, amelyekhez a felhasználók a munkahelyi környezetből hozzáférhetnek. A felhasználók a többi webhelyet nem érhetik el. Engedélyezési és tiltólistát is megadhat, de egyszerre mindkettőt nem adhatja meg."
- },
- "ApplicationProxyRedirection": {
- "header": "Alkalmazásproxy",
- "title": "Alkalmazásproxy átirányítása",
- "tooltip": "App Proxy-átirányítás engedélyezése, hogy a felhasználók elérhessék a vállalati hivatkozásokat és a helyszíni webalkalmazásokat."
- },
- "BlockedURLs": {
- "title": "Blokkolt URL-címek",
- "tooltip": "Adja meg azokat a webhelyeket, amelyek munkahelyi környezetből való elérését le szeretné tiltani a felhasználók számára. A felhasználók minden egyéb helyet elérhetnek. Engedélyezési és tiltólistát is megadhat, de egyszerre mindkettőt nem adhatja meg. "
- },
- "Bookmarks": {
- "header": "Felügyelt könyvjelzők",
- "tooltip": "Adja meg azon könyvjelzővel jelölt URL-címek listáját, amelyek elérhetők lesznek a felhasználók számára a Microsoft Edge munkahelyi környezetben való használatakor.",
- "uRL": "URL-cím"
- },
- "HomepageURL": {
- "header": "Felügyelt kezdőlap",
- "title": "Kezdőlap parancsikonjának URL-címe",
- "tooltip": "Állítson be egy kezdőlap-parancsikont, amely a keresősáv alatt az első ikonként jelenik meg, ha a felhasználók új lapot nyitnak meg a Microsoft Edge-ben."
- },
- "PersonalContext": {
- "label": "Korlátozott webhelyek átirányítása a személyes környezetbe",
- "tooltip": "Annak konfigurálása, hogy a felhasználók számára engedélyezni kell-e a személyes környezetre való váltást a korlátozott webhelyek megnyitásához."
- }
- },
- "BooleanActions": {
- "allow": "Engedélyezés",
- "block": "Tiltás",
- "configured": "Konfigurálva",
- "disable": "Letiltás",
- "dontRequire": "Nem kötelező",
- "enable": "Engedélyezés",
- "hide": "Elrejtés",
- "limit": "Korlát",
- "notConfigured": "Nincs beállítva",
- "require": "Kötelező",
- "show": "Megjelenítés",
- "yes": "Igen"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Elérhetővé tétel a felhasználók számára választható frissítésként",
- "optionalValue": "Választható",
- "required": "Elérhetővé tétel a felhasználók számára szükséges frissítésként",
- "requiredValue": "Szükséges"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 nap",
- "twoDays": "2 nap",
- "zeroDays": "0 nap"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Áttekintés"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Keresés eszköz, felhasználó vagy a minőségi frissítés verziója alapján."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Nem sikerült betölteni az iOS-szoftverfrissítési profilokat"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS-frissítési profil",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profil"
- },
- "listLoadError": "Nem sikerült betölteni az iOS-szoftverfrissítési profilokat. Próbálkozzon újra később",
- "lowercase": "iOS-frissítési szabályzat",
- "uppercase": "iOS-frissítési szabályzat"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Sajnáljuk, az Apple-höz való csatlakozás és az elérhető verziók listájának lekérése nem sikerült. Próbálkozzon újra később, vagy folytassa a legújabb verzióval.",
- "latestUpdate": "Legújabb frissítés",
- "noLongerSupported": "A kijelölt verzió már nem támogatott",
- "olderVersionSelected": "Korábbi verziót jelölt ki, ezért győződjön meg arról, hogy a szoftverfrissítések láthatóságát késleltető eszközkorlátozási szabályzatot alkalmaz, hogy az eszközök ne frissülhessenek a legújabb verzióra.",
- "prefix": "Az iOS/iPadOS telepítése",
- "selectSupported": "Válassza ki az Apple által támogatott frissítési verziót",
- "updateToInstall": "Telepítendő frissítés"
- },
- "Schedule": {
- "always": "Frissítés a következő bejelentkezéskor",
- "duringTimeWindows": "Frissítés az ütemezett idő alatt",
- "header": "Ha frissítési szabályzatot rendelnek egy eszközhöz, az Intune alapértelmezés szerint üzembe helyezi a legújabb frissítéseket az eszköz bejelentkezésekor. Ehelyett létrehozhat egy heti ütemezést is testreszabott kezdési és befejezési időpontokkal. Ha az ütemezett időn kívül kíván frissíteni, az Intune nem fogja üzembe helyezni a frissítéseket az ütemezett idő végéig.",
- "infoBalloon": "A frissítés végrehajtásának időpontja. Az ütemezett időtartamok közben vagy azokon kívül történő frissítések ütemezéséhez további beavatkozásra van szükség.",
- "label": "Ütemezéstípus",
- "outsideActiveHours": "Frissítés az aktív órákon kívül (örökölt)",
- "outsideTimeWindows": "Ütemezett időszakon kívüli frissítés",
- "timeWindow": "Időszak",
- "timeZone": "Időzóna",
- "title": "Frissítési szabályzat ütemezési beállításai:",
- "weekly": "Heti ütemezés",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "A frissítés időpontjában az eszközökre telepítendő iOS-/iPadOS-verzió.",
- "label": "Válassza ki a telepítendő verziót"
- },
- "header": "Hozzon létre egy profilt, amellyel kényszerítheti a társított eszközökön a legújabb iOS-/iPadOS-frissítések automatikus telepítését. Ezek a beállítások határozzák meg, hogyan és mikor történjen a szoftverfrissítések üzembe helyezése. Ez a profil nem akadályozza meg, hogy a felhasználók manuálisan frissítsék az operációs rendszert; ez egy eszközkonfigurációs korlátozási szabályzattal akadályozható meg legfeljebb 90 napra. A frissítések csak a felügyelt eszközökre vonatkoznak.",
- "notAvailable": "N. a."
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Nincsenek megjeleníthető iOS-frissítési szabályzatok",
- "macOsUpdates": "Nincsenek megjeleníthető macOS-szoftver-frissítési szabályzatok",
- "windowsUpdates": "Nincsenek megjelenítendő frissítési körök Windows 10 és újabb verziókhoz."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Eszköz neve",
- "deviceUpdateStatus": "Eszköz frissítési állapota",
- "lastUpdated": "Utoljára frissítve",
- "osVersion": "Operációs rendszer verziója",
- "userPrincipalName": "Felhasználónév"
- },
- "maximumOSVersionFilter": "Maximális operációsrendszer-verzió",
- "minimumOSVersionFilter": "Minimális operációsrendszer-verzió",
- "noData": "Nincsenek megjeleníthető adatok",
- "searchBoxPlaceholder": "Keresés eszköznév, felhasználónév vagy operációsrendszer-verzió alapján",
- "title": "macOS-eszközök fiókösszegzése"
- },
- "Category": {
- "configurationDataFile": "Konfigurációs fájl",
- "critical": "Kritikus",
- "firmware": "Belső vezérlőprogram",
- "other": "Egyéb"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Utolsó frissítés",
- "successfulUpdateCount": "Sikeres frissítéstelepítések",
- "totalUpdateCount": "Összes telepített frissítés",
- "updateCategory": "Frissítési kategória",
- "updateCategoryStatus": "Frissítési kategória állapota"
- },
- "noData": "Nincsenek megjeleníthető adatok"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Nem sikerült betölteni a macOS-szoftverfrissítési profilokat"
- }
- },
- "State": {
- "available": "Elérhető",
- "commandFailed": "Nem sikerült végrehajtani a parancsot",
- "downloadFailed": "Letöltés sikertelen.",
- "downloadInsufficientNetwork": "Letöltés – elégtelen hálózati kapacitás",
- "downloadInsufficientPower": "Letöltés – elégtelen akkumulátortöltöttség",
- "downloadInsufficientSpace": "Letöltés – elégtelen lemezterület",
- "downloaded": "Letöltve",
- "downloading": "Letöltés",
- "idle": "Tétlen",
- "installFailed": "A telepítés nem sikerült",
- "installInsufficientPower": "Telepítés – elégtelen akkumulátortöltöttség",
- "installInsufficientSpace": "Telepítés – elégtelen lemezterület",
- "installing": "Telepítés",
- "scheduled": "Ütemezve",
- "success": "Sikeres",
- "unknown": "Ismeretlen"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Utolsó frissítés",
- "updateName": "Frissítés neve",
- "updateStatus": "Frissítés állapota",
- "version": "Verzió"
- },
- "noData": "Nincsenek megjeleníthető adatok",
- "searchBoxPlaceholder": "Keresés frissítésnév vagy -verzió alapján"
- },
- "SummaryBlade": {
- "subtitle": "macOS-frissítési profil",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profil"
- },
- "error": "Hiba",
- "errorOrErrors": "Hiba vagy hibák",
- "errors": "Hibák",
- "listLoadError": "Nem sikerült betölteni a macOS-szoftverfrissítési profilokat. Próbálkozzon újra később",
- "lowercase": "macOS-frissítési szabályzat",
- "other": "Egyéb",
- "subtitle": "MacOS-szoftverfrissítés",
- "upToDate": "Naprakész",
- "uppercase": "macOS-frissítési szabályzat"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Próbálkozzon újra később",
- "title": "Nem sikerült a(z) {0} törlése"
- },
- "LoadAllConfigurationFailed": {
- "description": "Próbálkozzon újra később"
- },
- "LoadConfigurationFailed": {
- "description": "Próbálkozzon újra később",
- "title": "Nem sikerült betölteni a következőt: {0}"
- },
- "idWrongFormat": "A profilhoz megadott azonosító nem a várt formátumú."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "Válasszon ki legalább egy időablakot",
- "tooMany": "Legfeljebb 20 időablakot lehet konfigurálni"
- }
- },
- "endDay": "Záró nap",
- "endTime": "Befejezés időpontja",
- "startDay": "Kezdő nap",
- "startTime": "Kezdő időpont",
- "timeWindowError": "Válasszon egy legalább egyórás időtartamot."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Nem sikerült betölteni a Windows 10 és újabb verziók frissítési kör profiljait."
- }
- },
- "SummaryBlade": {
- "subtitle": "Frissítési kör Windows 10 és újabb verziókhoz",
- "title": "Windows Update Vállalatoknak"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 és újabb rendszerek",
- "title": "Frissítési kör Windows 10 és újabb verziókhoz"
- },
- "listLoadError": "Nem sikerült betölteni a frissítési kör profilokat a Windows 10 és újabb verziókhoz. Próbálkozzon újra később",
- "lowercase": "Frissítési kör",
- "uppercase": "Frissítési kör"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Szabályzatbeállítások frissítése",
- "updateRingSettings": "Frissítési kör beállításai"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "{0} létrehozása",
- "edit": "{0} szerkesztése"
- }
- },
- "notScannedYet": "Még nem történt vizsgálat",
- "outOfDateIosDevices": "Elavult iOS-eszközök"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Eszközkorlátozások (eszköztulajdonos)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS-frissítési szabályzat"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Egyenlő",
+ "greaterThan": "Nagyobb, mint",
+ "greaterThanOrEqualTo": "nagyobb vagy egyenlő",
+ "lessThan": "Kevesebb, mint",
+ "lessThanOrEqualTo": "kisebb vagy egyenlő",
+ "notEqualTo": "Nem egyenlő"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Szkriptaláírás ellenőrzésének kényszerítése és a szkript csendes futtatása",
+ "enforceSignatureCheckTooltip": "Válassza az Igen lehetőséget annak ellenőrzéséhez, hogy a szkriptet egy megbízható kiadó írta alá, ami lehetővé teszi, hogy a szkript figyelmeztetések és megerősítés kérése nélkül fusson. A szkript letiltás nélkül fog futni. Válassza a Nem (alapértelmezett) lehetőséget, ha a szkriptet végfelhasználói megerősítéssel szeretné futtatni az aláírás ellenőrzése nélkül.",
+ "header": "Egyéni észlelési szkript használata",
+ "runAs32Bit": "Szkript futtatása 32 bites folyamatként 64 bites ügyfeleken",
+ "runAs32BitTooltip": "Válassza az Igen lehetőséget a szkript 32 bites folyamatban való futtatásához 64 bites ügyfeleken. Válassza a Nem (alapértelmezett) lehetőséget, ha a szkriptet 64 bites folyamatban szeretné futtatni 64 bites ügyfeleken. A szkriptet a 32 bites ügyfelek 32 bites folyamatban futtatják.",
+ "scriptContent": "Szkript tartalma",
+ "scriptFile": "Parancsfájl",
+ "scriptFileNotSelectedValidation": "Nincs kijelölve szkriptfájl.",
+ "scriptFileTooltip": "Válasszon ki egy PowerShell-szkriptet, amely észleli az alkalmazás jelenlétét az ügyfélen. Az alkalmazás észlelése akkor történik meg, ha a szkript 0 értékű kilépési kódot ad vissza, és sztringértéket ír az STDOUT kimenetbe.",
+ "scriptSizeLimitValidation": "Az észlelési szkript meghaladja a megengedett maximális méretet. A probléma megoldásához csökkentse az észlelési szkript méretét."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Létrehozás dátuma",
+ "dateModified": "Módosítás dátuma",
+ "doesNotExist": "A megadott fájl vagy mappa nem létezik.",
+ "fileOrFolderExists": "A fájl vagy mappa létezik",
+ "sizeInMB": "Méret (MB)",
+ "version": "Sztring (verzió)"
+ },
+ "associatedWith32Bit": "64 bites ügyfeleken egy 32 bites alkalmazással társított",
+ "associatedWith32BitTooltip": "Válassza az Igen lehetőséget az elérési út környezeti változóinak 32 bites környezetben való kibontásához 64 bites ügyfeleken. Válassza a Nem (alapértelmezett) lehetőséget, ha az elérési út változóit 64 bites környezetben szeretné kibontani 64 bites ügyfeleken. A 32 bites ügyfelek mindig a 32 bites környezetet fogják használni.",
+ "detectionMethod": "Észlelési módszer",
+ "detectionMethodTooltip": "Válassza ki az alkalmazás jelenlétének érvényesítésére használt észlelési módszer típusát.",
+ "fileOrFolder": "Fájl vagy mappa",
+ "fileOrFolderToolTip": "A felderítendő fájl vagy mappa.",
+ "operator": "Operátor",
+ "operatorTooltip": "Válassza ki az operátort az összehasonlítás érvényesítéséhez használt észlelési módszerhez.",
+ "path": "Elérési út",
+ "pathTooltip": "A felderítendő fájlt vagy mappát tartalmazó mappa teljes elérési útja.",
+ "value": "Érték",
+ "valueTooltip": "Válasszon egy olyan értéket, amely megfelel a választott észlelési módszernek. A dátumészlelési módszereket helyi időben kell megadni."
+ },
+ "GridColumns": {
+ "pathOrCode": "Elérési út/kód",
+ "type": "Típus"
+ },
+ "MsiRule": {
+ "operator": "Operátor",
+ "operatorTooltip": "Válassza ki az operátort az MSI-termékverzió érvényesítésének összehasonlításához.",
+ "productCode": "MSI-termékkód",
+ "productCodeTooltip": "Egy érvényes MSI-termékkód az alkalmazáshoz.",
+ "productVersion": "Érték",
+ "productVersionCheck": "MSI-termékverzió ellenőrzése",
+ "productVersionCheckTooltip": "Válassza az Igen lehetőséget, ha az MSI-termékkód mellett az MSI-termékverziót is ellenőrizni szeretné.",
+ "productVersionTooltip": "Az MSI termékverziójának megadása az alkalmazáshoz."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Egész szám összehasonlítása",
+ "keyDoesNotExist": "A kulcs nem létezik",
+ "keyExists": "A kulcs létezik",
+ "stringComparison": "Sztringek összehasonlítása",
+ "valueDoesNotExist": "Az érték nem létezik",
+ "valueExists": "Az érték már létezik",
+ "versionComparison": "Verziók összehasonlítása"
+ },
+ "associatedWith32Bit": "64 bites ügyfeleken egy 32 bites alkalmazással társított",
+ "associatedWith32BitTooltip": "Válassza az Igen lehetőséget a 32 bites regisztrációs adatbázisban való kereséshez 64 bites ügyfeleken. Válassza a Nem (alapértelmezett) lehetőséget, ha a 64 bites regisztrációs adatbázisban szeretne keresni 64 bites ügyfeleken. A 32 bites ügyfelek mindig a 32 bites regisztrációs adatbázisban keresnek.",
+ "detectionMethod": "Észlelési módszer",
+ "detectionMethodTooltip": "Válassza ki az alkalmazás jelenlétének érvényesítésére használt észlelési módszer típusát.",
+ "keyPath": "Kulcs elérési útja",
+ "keyPathTooltip": "A felderítendő értéket tartalmazó beállításjegyzékbeli bejegyzés teljes elérési útja.",
+ "operator": "Operátor",
+ "operatorTooltip": "Válassza ki az operátort az összehasonlítás érvényesítéséhez használt észlelési módszerhez.",
+ "value": "Érték",
+ "valueName": "Azonosítónév",
+ "valueNameTooltip": "Az észlelendő beállításazonosító neve.",
+ "valueTooltip": "Válasszon egy értéket, amely megfelel a kijelölt észlelési módszernek."
+ },
+ "RuleTypeOptions": {
+ "file": "Fájl",
+ "mSI": "MSI",
+ "registry": "Beállításjegyzék"
+ },
+ "gridAriaLabel": "Észlelési szabályok",
+ "header": "Egy, az alkalmazás jelenlétét jelző szabály létrehozása.",
+ "noRulesSelectedPlaceholder": "Nincs megadva szabály.",
+ "ruleTableLimit": "Legfeljebb 25 észlelési szabályt vehet fel",
+ "ruleType": "Szabálytípus",
+ "ruleTypeTooltip": "Válassza ki a hozzáadni kívánt észlelési szabály típusát."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Egyéni észlelési szkript használata",
+ "manual": "Észlelési szabályok manuális konfigurálása"
+ },
+ "bladeTitle": "Észlelési szabályok",
+ "header": "Az alkalmazás észlelésére használt, az alkalmazásra vonatkozó szabályok konfigurálása.",
+ "rulesFormat": "Szabályok formátuma",
+ "rulesFormatTooltip": "Választhat, hogy manuálisan konfigurálja az észlelési szabályokat, vagy egyéni szkriptet használ az alkalmazás jelenlétének észlelésére.",
+ "selectorLabel": "Észlelési szabályok"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Fogadja el a Microsoft szoftverlicenc-szerződését a felhasználók nevében",
"appSuiteConfigurationLabel": "Alkalmazáscsomag konfigurálása",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} nyelv kiválasztva",
"xmlConfigurationLabel": "XML-konfiguráció"
},
- "Filters": {
- "ruleSyntax": "Szabály szintaxisa",
- "filters": "Szűrők"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "A felhasználó módosíthatja a beállításokat",
- "tooltip": "Adja meg, hogy a felhasználó módosíthassa-e a beállítást."
- },
- "AllowWorkAccounts": {
- "title": "Csak munkahelyi vagy iskolai fiókok engedélyezése",
- "tooltip": " Ha engedélyezi ezt a beállítást, a felhasználók nem fognak tudni személyes e-mail- és tárfiókokat felvenni az Outlookban. Ha a felhasználó rendelkezik az Outlookban felvett személyes fiókkal, az alkalmazás a felhasználótól a személyes fiók eltávolítását fogja kérni. Ha a felhasználó nem távolítja el a személyes fiókot, akkor a munkahelyi vagy iskolai fiókot nem lehet hozzáadni."
- },
- "BlockExternalImages": {
- "title": "Külső képek blokkolása",
- "tooltip": "Ha engedélyezve van a külső lemezképek letiltása, az alkalmazás megakadályozza azoknak az interneten tárolt képeknek a letöltését, amelyek az üzenettörzsbe vannak beágyazva. Ha nincs konfigurálva a beállítás, az alkalmazásbeállítás alapértelmezett értéke a Kikapcsolva."
- },
- "ConfigureEmail": {
- "title": "E-mail-fiók beállításainak konfigurálása"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Az alapértelmezett alkalmazás-aláírás azt jelzi hogy az alkalmazás „Az Android Outlook letöltése” aláírást alapértelmezett aláírásként fogja-e használni üzenetek írásakor. Ha le van tiltva a beállítás, az alkalmazás nem fogja használni az alapértelmezett aláírást, a felhasználók azonban hozzáadhatják saját aláírásukat.\r\n\r\nHa nincs konfigurálva a beállítás, az alapértelmezett alkalmazásbeállítás engedélyezve lesz.",
- "iOS": "Az alapértelmezett alkalmazás-aláírás azt jelzi hogy az alkalmazás „Az iOS Outlook letöltése” aláírást alapértelmezett aláírásként fogja-e használni üzenetek írásakor. Ha le van tiltva a beállítás, az alkalmazás nem fogja használni az alapértelmezett aláírást, a felhasználók azonban hozzáadhatják saját aláírásukat.\r\n\r\nHa nincs konfigurálva a beállítás, az alapértelmezett alkalmazásbeállítás engedélyezve lesz."
- },
- "title": "Alapértelmezett alkalmazás-aláírás"
- },
- "OfficeFeedReplies": {
- "title": "Felfedezési hírcsatorna",
- "tooltip": "A felfedezési hírcsatorna elérhetővé teszi a leggyakrabban használt Office-fájlokat. Alapértelmezés szerint ez a hírcsatorna engedélyezve van, ha a Delve használata engedélyezve van a felhasználó számára. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezés szerint be van kapcsolva."
- },
- "OrganizeMailByThread": {
- "title": "Levelezés rendezése szálak szerint",
- "tooltip": "Az Outlook alapértelmezett viselkedése, hogy a levelezés beszélgetéseit szálak szerint csoportosított beszélgetési nézetbe rendezi. Ha ez a beállítás le van tiltva, az Outlook minden üzenetet külön jelenít meg, és nem csoportosítja őket szálak szerint."
- },
- "PlayMyEmails": {
- "title": "Saját e-mailek lejátszása",
- "tooltip": "A saját e-mailek lejátszása funkció alapértelmezés szerint nincs engedélyezve az alkalmazásban, de a Beérkezett üzenetek mappában egy transzparensen felajánlható a jogosult felhasználóknak. Ha ez a beállítás ki van kapcsolva, a funkció nem lesz felajánlva a jogosult felhasználóknak az alkalmazásban. A felhasználók dönthetnek úgy, hogy manuálisan engedélyezik a saját e-mailek lejátszását az alkalmazásból, még akkor is, ha ez a funkció ki van kapcsolva. Ha a beállítás nincs konfigurálva, az alkalmazásbeállítás alapértelmezés szerint be van kapcsolva, és a funkció fel lesz ajánlva a jogosult felhasználóknak."
- },
- "SuggestedReplies": {
- "title": "Javasolt válaszok",
- "tooltip": "Ha megnyit egy üzenetet, az Outlook válaszokat javasolhat az üzenet alatt. Ha kiválaszt egy javasolt választ, azt a küldés előtt módosíthatja."
- },
- "SyncCalendars": {
- "title": "Naptárak szinkronizálása",
- "tooltip": "Annak konfigurálása, hogy a felhasználók szinkronizálhatják-e az Outlook-naptárt a natív naptáralkalmazással és -adatbázissal."
- },
- "TextPredictions": {
- "title": "Prediktív szövegbevitel",
- "tooltip": "Az Outlook az üzenetek írása közben javasolhat szavakat és kifejezéseket. Ha az Outlook javasol valamit, pöccintéssel elfogadhatja. Ha a beállítás nincs konfigurálva, alapértelmezett esetben be van kapcsolva az alkalmazásban."
- },
- "ThemesEnabled": {
- "title": "Témák engedélyezve",
- "tooltip": "Adja meg, hogy a felhasználó használhat-e egyéni vizuális témát."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS-eszközök"
- },
- "ManagedDesktop": {
- "adminContacts": "Rendszergazdai kapcsolatok",
- "appPackaging": "Alkalmazás csomagolása",
- "autopatchGroups": "Automatikus javítási csoportok",
- "devices": "Eszközök",
- "featureEnablement": "Funkció aktiválása",
- "feedback": "Visszajelzés",
- "gettingStarted": "Kezdeti lépések",
- "messages": "Üzenetek",
- "onlineResources": "Online erőforrások",
- "policyHealth": "Szabályzat állapota",
- "policyHealthPreview": "Szabályzat állapota (előzetes verzió)",
- "releaseManagement": "Kiadáskezelés",
- "serviceRequests": "Szolgáltatáskérelmek",
- "settings": "Beállítások",
- "supportRequests": "Támogatási kérések",
- "tenantEnrollment": "Bérlői regisztráció",
- "tenantManagement": "Bérlőkezelés"
- },
- "actions": "Meg nem felelés esetén végrehajtandó műveletek",
- "advancedExchangeSettings": "Exchange Online-beállítások",
- "advancedThreatProtection": "Microsoft Defender for Endpoint",
- "allApps": "Minden alkalmazás",
- "allDevices": "Minden eszköz",
- "androidFotaDeployments": "Android FOTA üzembe helyezése",
- "appBundles": "Alkalmazáskötegek",
- "appCategories": "Alkalmazáskategóriák",
- "appConfigPolicies": "Alkalmazáskonfigurációs szabályzatok",
- "appConfigurationStatus": "Alkalmazáskonfiguráció állapota",
- "appInstallStatus": "Alkalmazás telepítésének állapota",
- "appLicences": "Alkalmazáslicencek",
- "appProtectionPolicies": "Alkalmazásvédelmi szabályzatok",
- "appProtectionStatus": "Alkalmazásvédelem állapota",
- "appSelectiveWipe": "Alkalmazás szelektív törlése",
- "appleVppTokens": "Apple VPP-tokenek",
- "apps": "Alkalmazások",
- "assign": "Feladatok",
- "assignedPermissions": "Hozzárendelt engedélyek",
- "assignedRoles": "Hozzárendelt szerepkörök",
- "autopilotDeploymentReport": "Autopilot-beli üzemelő példányok (előzetes verzió)",
- "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (előzetes verzió)",
- "brandingAndCustomization": "Testreszabás",
- "cartProfiles": "Kocsiprofilok",
- "certificateConnectors": "Tanúsítvány-összekötők",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Felhőalapú csatlakoztatott eszközök (előzetes verzió)",
- "cloudPcActions": "Felhőbeli PC-műveletek (előzetes verzió)",
- "cloudPcMaintenanceWindows": "Felhőalapú PC karbantartási időszakai (előzetes verzió)",
- "compliancePolicies": "Megfelelőségi szabályzatok",
- "complianceScriptManagement": "Szkriptek",
- "complianceScriptManagementPreview": "Szkriptek (előzetes verzió)",
- "complianceSettings": "Megfelelőségi szabályzat beállításai",
- "conditionStatements": "Feltételutasítások",
- "conditions": "Helyek",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Konfigurációs profilok",
- "configurationScripts": "Konfigurációs szkriptek",
- "connectorsAndTokens": "Összekötők és tokenek",
- "corporateDeviceIdentifiers": "Céges készülékazonosítók",
- "customAttributes": "Egyéni attribútumok",
- "customNotifications": "Egyéni értesítések",
- "deploymentSettings": "Üzembe helyezési beállítások",
- "derivedCredentials": "Származtatott hitelesítő adatok",
- "deviceActions": "Eszközműveletek",
- "deviceCategories": "Eszközkategóriák",
- "deviceCleanUp": "Eszközök adattörlési szabályai",
- "deviceEnrollmentManagers": "Készülékregisztráció-kezelők",
- "deviceExecutionStatus": "Eszköz állapota",
- "deviceLimitEnrollmentRestrictions": "Eszközszámkorlátok beléptetése",
- "deviceTypeEnrollmentRestrictions": "Eszközplatformra vonatkozó korlátozások beléptetése",
- "devices": "Eszközök",
- "discoveredApps": "Detektált alkalmazások",
- "edgePolicies": "A Microsoft Edge házirendjei",
- "embeddedSIM": "Mobilhálózati eSIM-profilok (Előzetes verzió)",
- "enrollDevices": "Eszközök regisztrálása",
- "enrollmentFailures": "Sikertelen regisztrálások",
- "enrollmentNotifications": "Regisztrációs értesítések (Előzetes verzió)",
- "enrollmentRestrictions": "Regisztrációs korlátozások",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange szolgáltatás-összekötők",
- "failuresForCumulativeQualityUpdates": "A Windows összegző minőségi frissítés hibái",
- "failuresForDriverUpdates": "A Windows illesztőprogram-frissítés hibái",
- "failuresForFeatureUpdates": "Szolgáltatás-frissítési hibák",
- "failuresForQualityUpdates": "A Windows gyorsított frissítés hibái",
- "featureFlighting": "Funkciótesztelés",
- "featureUpdateDeployments": "Funkciófrissítések Windows 10-es és újabb verziókhoz",
- "flighting": "Tesztelés",
- "fotaUpdate": "Belső vezérlőprogram vezeték nélküli frissítése",
- "groupPolicy": "Felügyeleti sablonok",
- "groupPolicyAnalytics": "Csoportházirend-elemzés",
- "helpSupport": "Súgó és támogatás",
- "helpSupportReplacement": "Súgó és támogatás ({0})",
- "iOSAppProvisioning": "iOS-es alkalmazáskiépítési profilok",
- "incompleteUserEnrollments": "Hiányos felhasználóregisztrációk",
- "iosUpdates": "Az iOS/iPadOS frissítési szabályzatai",
- "legacyPcManagement": "Örökölt PC-kezelés",
- "macOSSoftwareUpdate": "macOS-frissítési szabályzatok",
- "macOSSoftwareUpdateAccountSummaries": "MacOS-es eszközök telepítési állapota",
- "macOSSoftwareUpdateCategorySummaries": "Szoftverfrissítések összegzése",
- "macOSSoftwareUpdateStateSummaries": "frissítések",
- "managedGooglePlay": "Felügyelt Google Play",
- "msfb": "Microsoft Store Vállalatoknak",
- "myPermissions": "Engedélyeim",
- "notifications": "Értesítések",
- "officeApps": "Office-alkalmazások",
- "officeProPlusPolicies": "Office-alkalmazásokra vonatkozó szabályzatok",
- "onPremise": "Helyszíni",
- "onPremisesConnector": "Exchange ActiveSync helyszíni összekötő",
- "onPremisesDeviceAccess": "Exchange ActiveSync-eszközök",
- "onPremisesManageAccess": "Helyszíni Exchange-hozzáférés",
- "outOfDateIosDevices": "iOS-eszközök telepítési hibái",
- "overview": "Áttekintés",
- "partnerDeviceManagement": "Partnereszköz-kezelés",
- "perUpdateRingDeploymentState": "Frissítési kör telepítési állapota szerint",
- "permissions": "Engedélyek",
- "platformApps": "{0} alkalmazás",
- "platformDevices": "{0} eszköz",
- "platformEnrollment": "{0} regisztrációja",
- "policies": "Szabályzatok",
- "profiles": "Profilok",
- "properties": "Tulajdonságok",
- "reports": "Jelentések",
- "retireNoncompliantDevices": "Nem megfelelő eszközök kivonása",
- "retireNoncompliantDevicesPreview": "Nem megfelelő eszközök kivonása (előzetes verzió)",
- "role": "Szerepkör",
- "scriptManagement": "Parancsfájlok",
- "securityBaselines": "Biztonsági alapkonfigurációk",
- "serviceToServiceConnector": "Exchange Online Connector",
- "servicenowConnector": "ServiceNow-összekötő",
- "shellScripts": "Héjszkriptek",
- "teamViewerConnector": "TeamViewer-összekötő",
- "telecomeExpenseManagement": "Távközlési költségek kezelése",
- "tenantAdmin": "Bérlői adminisztrátor",
- "tenantAdministration": "Bérlői felügyelet",
- "termsAndConditions": "Feltételek és kikötések",
- "titles": "Címek",
- "troubleshoot": "Hibaelhárítás",
- "troubleshootSupport": "Hibaelhárítás + ügyfélszolgálat",
- "user": "Felhasználó",
- "userExecutionStatus": "Felhasználó állapota",
- "wdacSupplementalPolicies": "Az S mód kiegészítő szabályzatai",
- "win32CatalogUpdateApp": "A Nagyvállalati alkalmazásfelügyeleti alkalmazások frissítései",
- "win32CatalogUpdateAppInPreview": "A Windows (Win32) katalógusalkalmazásainak frissítései (előzetes verzió)",
- "windows10DriverUpdate": "Illesztőprogram-frissítések Windows 10-es és újabb verziókhoz",
- "windows10QualityUpdate": "Minőségi frissítések Windows 10-es és újabb verziókhoz",
- "windows10UpdateRings": "Frissítési körök Windows 10 és újabb verziókhoz",
- "windows10XPolicyFailures": "Windows 10X-szabályzat hibái",
- "windows365PartnerConnector": "Windows 365-partnerösszekötők",
- "windowsDiagnosticData": "Windows-adatok",
- "windowsEnterpriseCertificate": "Windowsos vállalati tanúsítvány",
- "windowsManagement": "Parancsfájlok",
- "windowsSideLoadingKeys": "Közvetlen telepítési kulcsok (Windows)",
- "windowsSymantecCertificate": "Windows DigiCert-tanúsítvány",
- "windowsThreatReport": "Veszélyforrás állapota"
- },
- "ScopeTypes": {
- "allDevices": "Minden eszköz",
- "allUsers": "Minden felhasználó",
- "allUsersAndDevices": "Minden felhasználó és minden eszköz",
- "selectedGroups": "Kiválasztott csoportok"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Keresés alapértelmezettként",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype Vállalati verzió",
- "oneDrive": "Asztali OneDrive",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone és iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Nem támogatott",
+ "supportEnding": "A támogatás vége",
+ "supported": "Támogatott"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Alapértelmezett",
- "header": "Prioritás frissítése",
- "postponed": "Elhalasztva",
- "priority": "Magas prioritás"
- },
- "AutoUpdateSupersededApps": {
- "label": "Automatikus frissítés",
- "sublabel": "Ha a felhasználó telepítette a felülírt alkalmazás(oka)t a céges portálról, felülíró alkalmazás(ok) telepítését követelje meg."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Háttér",
- "displayText": "Tartalom letöltése a következőben: {0}",
- "foreground": "Előtér",
- "header": "Szállítás optimalizálásának prioritása"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Az újraindítási értesítés késleltetésének engedélyezése a felhasználó számára",
- "countdownDialog": "Adja meg, hogy mikor jelenjen meg az újraindítási visszaszámlálás párbeszédpanelje az újraindítás előtt (perc)",
- "durationInMinutes": "Eszköz újraindításának türelmi ideje (perc)",
- "snoozeDurationInMinutes": "Adja meg a késleltetési időt (perc)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Időzóna",
- "local": "Eszköz időzónája",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Dátum és idő",
- "deadlineTimeColumnLabel": "Telepítési határidő",
- "deadlineTimeDatePickerErrorMessage": "A kijelölt dátumnak az elérhetőség dátumánál későbbinek kell lennie",
- "deadlineTimeLabel": "Alkalmazástelepítés határideje",
- "defaultTime": "Amint lehetséges",
- "infoText": "Az alkalmazás a telepítés után azonnal elérhető lesz, hacsak nem adja meg alább az elérhetőség időpontját. Ha ez egy szükséges alkalmazás, akkor megadhatja a telepítési határidőt.",
- "specificTime": "Egy megadott dátum és időpont",
- "startTimeColumnLabel": "Elérhetőség",
- "startTimeDatePickerErrorMessage": "A kijelölt dátumnak a határidő dátumánál korábbinak kell lennie",
- "startTimeLabel": "Alkalmazás rendelkezésre állása"
- },
- "restartGracePeriodHeader": "Türelmi időszak újraindítása",
- "restartGracePeriodLabel": "Eszköz újraindításának türelmi ideje",
- "summaryTitle": "Végfelhasználói felület"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "A fájl vagy a mappa mint kiválasztott követelmény.",
- "pathToolTip": "Az észlelendő fájl vagy mappa teljes elérési útja.",
- "property": "Tulajdonság",
- "valueToolTip": "Válasszon olyan követelményértéket, amely megfelel a választott észlelési módszernek. A dátum és idő követelményét a helyi formátumban kell megadni."
- },
- "GridColumns": {
- "pathOrScript": "Elérési út vagy szkript",
- "type": "Típus"
- },
- "Registry": {
- "keyPath": "Kulcs elérési útja",
- "keyPathTooltip": "A követelményként szolgáló értéket tartalmazó beállításjegyzék-bejegyzés teljes elérési útja.",
- "operator": "Operátor",
- "operatorTooltip": "Válassza ki az operátort az összehasonlításhoz.",
- "registryRequirement": "Beállításkulcsra vonatkozó követelmény",
- "registryRequirementTooltip": "Válassza ki a beállításkulcsra vonatkozó követelmények összehasonlításának módját.",
- "valueName": "Azonosítónév",
- "valueNameTooltip": "A szükséges beállításjegyzék-érték neve."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Az összes ajánlott illesztőprogram-frissítés automatikus jóváhagyása",
+ "manual": "Illesztőprogram-frissítések manuális jóváhagyása és üzembe helyezése"
+ },
+ "BulkActions": {
+ "button": "Tömeges műveletek"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Jóváhagyási módszer:"
},
- "RequirementTypeOptions": {
- "fileType": "Fájl",
- "registry": "Beállításjegyzék",
- "script": "Szkript"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Logikai érték",
- "dateTime": "Dátum és idő",
- "float": "Lebegőpontos szám",
- "integer": "Egész szám",
- "string": "Sztring",
- "version": "Verzió"
- },
- "duplicateName": "A(z) {0} szkriptnév már használatban van. Adjon meg egy másik nevet.",
- "enforceSignatureCheck": "Szkriptaláírás ellenőrzésének kényszerítése",
- "enforceSignatureCheckTooltip": "Az „Igen” lehetőség kiválasztásával ellenőrizheti, hogy a szkriptet egy megbízható gyártó írta-e alá, így a szkript figyelmeztetések és felszólítások megjelenítése nélkül fog futni. A szkript letiltás nélkül fog futni. A „Nem” (ez az alapértelmezett beállítás) kiválasztásakor a szkript végfelhasználói megerősítéssel, de az aláírás ellenőrzése nélkül fut.",
- "loggedOnCredentials": "Szkript futtatása a bejelentkezéshez használt hitelesítő adatokkal",
- "loggedOnCredentialsTooltip": "Szkript futtatása a bejelentkezett eszköz hitelesítő adataival.",
- "operatorTooltip": "Válassza ki az operátort a követelmények összehasonlításához.",
- "requirementMethod": "Kimeneti adattípus kiválasztása...",
- "requirementMethodTooltip": "Válassza ki, hogy a rendszer melyik adattípust használja az észlelési egyezési követelmények meghatározásakor.",
- "scriptContent": "Szkript tartalma",
- "scriptFile": "Parancsfájl",
- "scriptFileTooltip": "Válasszon egy PowerShell-szkriptet, amely észleli majd az alkalmazás jelenlétét az ügyfélen. Ha a rendszer észleli az alkalmazást, a követelményfolyamat egy 0 értékű kilépési kódot ad vissza, és sztringértéket ír az STDOUT elembe.",
- "scriptName": "Szkript neve",
- "value": "Érték",
- "valueTooltip": "Válasszon olyan követelményértéket, amely megfelel a választott észlelési módszernek. A dátum és idő követelményét a helyi formátumban kell megadni."
+ "DeploymentDeferralInDays": {
+ "label": "Frissítések elérhetővé tétele a következő után:",
+ "units": "(nap)",
+ "value": "{0} nap"
+ },
+ "DriverAction": {
+ "header": "Válasszon műveletet az alábbiak közül.",
+ "label": "Illesztőprogram-művelet",
+ "placeholder": "Válasszon műveletet"
},
- "bladeTitle": "Követelményszabály hozzáadása",
- "createRequirementHeader": "Követelmény létrehozása",
- "header": "További követelményszabályok konfigurálása",
- "label": "További követelményszabályok",
- "noRequirementsSelectedPlaceholder": "Nincsenek megadva követelmények.",
- "requirementType": "Követelmény típusa",
- "requirementTypeTooltip": "Válassza ki a követelmény érvényesítésének meghatározásához használt észlelési módszert."
- },
- "architectures": "Operációs rendszer architektúrája",
- "architecturesTooltip": "Válassza ki az alkalmazás telepítéséhez szükséges architektúrákat.",
- "bladeTitle": "Követelmények",
- "diskSpace": "Szükséges lemezterület (MB)",
- "diskSpaceTooltip": "Az alkalmazás telepítéséhez szabad lemezterület szükséges a rendszermeghajtón.",
- "header": "Adja meg, milyen követelményeknek kell megfelelnie az eszközöknek az alkalmazás telepítése előtt:",
- "maximumTextFieldValue": "A maximális érték {0}.",
- "minimumCpuSpeed": "Szükséges minimális processzorsebesség (MHz)",
- "minimumCpuSpeedTooltip": "Az alkalmazás telepítéséhez szükséges minimális CPU-sebesség.",
- "minimumLogicalProcessors": "Logikai processzorok szükséges minimális száma",
- "minimumLogicalProcessorsTooltip": "Az alkalmazás telepítéséhez szükséges logikai processzorok minimális száma.",
- "minimumOperatingSystem": "Minimális operációsrendszer-verzió",
- "minimumOperatingSystemTooltip": "Válassza ki az alkalmazás telepítéséhez szükséges minimális operációs rendszert.",
- "minumumTextFieldValue": "A minimális érték {0}.",
- "physicalMemory": "Szükséges fizikai memória (MB)",
- "physicalMemoryTooltip": "Az alkalmazás telepítéséhez szükséges fizikai memória (RAM).",
- "selectorLabel": "Követelmények",
- "validNumber": "Adjon meg egy érvényes számot."
- },
- "PolicySet": {
- "appManagement": "Alkalmazáskezelés",
- "assignments": "Hozzárendelések",
- "basics": "Alapvető beállítások",
- "deviceEnrollment": "Eszközök beléptetése",
- "deviceManagement": "Eszközkezelés",
- "scopeTags": "Hatókörcímkék",
- "appConfigurationTitle": "Alkalmazáskonfigurációs szabályzatok",
- "appProtectionTitle": "Alkalmazásvédelmi szabályzatok",
- "appTitle": "Alkalmazások",
- "iOSAppProvisioningTitle": "iOS-es alkalmazáskiépítési profilok",
- "deviceLimitRestrictionTitle": "Eszközszámkorlátok",
- "deviceTypeRestrictionTitle": "Eszköztípus-korlátozások",
- "enrollmentStatusSettingTitle": "Regisztráció állapotát jelző lapok",
- "windowsAutopilotDeploymentProfileTitle": "Windows AutoPilot Deployment-profilok",
- "deviceComplianceTitle": "Eszközmegfelelőségi szabályzatok",
- "deviceConfigurationTitle": "Eszközkonfigurációs profilok",
- "powershellScriptTitle": "PowerShell-szkriptek"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Belefoglalt illesztőprogramok"
+ },
+ "SelectDrivers": {
+ "header": "Válassza ki a tömeges műveletbe belefoglalni kívánt illesztőprogramokat"
+ },
+ "SelectDriversToInclude": {
+ "button": "Válassza ki a belefoglalandó illesztőprogramokat"
+ },
+ "SelectLessDrivers": {
+ "validation": "Legfeljebb száz illesztőprogramot lehet kiválasztani"
+ },
+ "SelectMoreDrivers": {
+ "validation": "Legalább egy illesztőprogramot ki kell jelölni"
+ },
+ "SelectedDrivers": {
+ "label": "Kiválasztott illesztőprogramok"
+ },
+ "availabilityDate": "Elérhetővé tétel a Windows Update webhelyen",
+ "bladeTitle": "Illesztőprogram-frissítések Windows 10-es és újabb verziókhoz (előzetes verzió)",
+ "lastSync": "Legutóbbi szinkronizálás:",
+ "lastSyncDefaultText": "A kezdeti készlet összegyűjtése függőben",
+ "loadError": "A betöltés sikertelen!"
+ },
+ "DriverStatus": {
+ "approved": "Jóváhagyva",
+ "declined": "Elutasítva",
+ "export": "Ajánlott illesztőprogramok exportálása",
+ "needsReview": "Felülvizsgálatot igényel",
+ "paused": "Felfüggesztve"
+ },
+ "DriversToReview": {
+ "text": "{0} felülvizsgálandó"
+ },
+ "Subtitle": {
+ "automatic": "Automatikus jóváhagyásos illesztőprogram-frissítési házirend",
+ "manual": "Manuális jóváhagyásos illesztőprogram-frissítési házirend"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Ajánlott frissítések",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrein",
- "countryNameZA": "Dél-afrikai Köztársaság",
- "countryNameJO": "Jordánia",
- "countryNameSD": "Szudán",
- "countryNameNU": "Niue",
- "countryNameCZ": "Cseh Köztársaság",
- "countryNameLT": "Litvánia",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hongkong KKT",
- "countryNameGH": "Ghána",
- "countryNameSA": "Szaúd-Arábia",
- "countryNamePG": "Pápua Új-Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "India",
- "countryNameHN": "Honduras",
- "countryNameRO": "Románia",
- "countryNameKZ": "Kazahsztán",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Grúzia",
- "countryNameTT": "Trinidad és Tobago",
- "countryNameMP": "Északi Mariana-szigetek",
- "countryNameMV": "Maldív-szigetek",
- "countryNameFI": "Finnország",
- "countryNameNO": "Norvégia",
- "countryNameEE": "Észtország",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Üzbegisztán",
- "countryNameME": "Montenegró",
- "countryNameTJ": "Tádzsikisztán",
- "countryNameAW": "Aruba",
- "countryNameFR": "Franciaország",
- "countryNameOM": "Omán",
- "countryNameAO": "Angola",
- "countryNameIT": "Olaszország",
- "countryNameAZ": "Azerbajdzsán",
- "countryNameKG": "Kirgizisztán",
- "countryNameWF": "Wallis és Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falkland-szigetek (Malvin-szigetek)",
- "countryNameGY": "Guyana",
- "countryNameSS": "Dél-Szudán",
- "countryNameMM": "Mianmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Szíria",
- "countryNameMD": "Moldova",
- "countryNameVC": "Saint Vincent és Grenadine-szigetek",
- "countryNameID": "Indonézia",
- "countryNameRE": "Réunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "Észak-Macedónia",
- "countryNameTG": "Togo",
- "countryNamePF": "Francia Polinézia",
- "countryNameKY": "Kajmán-szigetek",
- "countryNameIO": "Brit indiai-óceáni terület",
- "countryNameRU": "Oroszország",
- "countryNameMA": "Marokkó",
- "countryNameAU": "Ausztrália",
- "countryNameBO": "Bolívia",
- "countryNameVA": "Szentszék (Vatikán)",
- "countryNameVG": "Brit Virgin-szigetek",
- "countryNameFM": "Mikronézia",
- "countryNameAQ": "Antarktika",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brazília",
- "countryNameIS": "Izland",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgária",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltár",
- "countryNameBS": "Bahama-szigetek",
- "countryNameJE": "Jersey",
- "countryNameMO": "Makaó (KKT)",
- "countryNameRW": "Ruanda",
- "countryNameAS": "Amerikai Szamoa",
- "countryNameBQ": "Bonaire, Sint Eustatius és Saba",
- "countryNameMF": "Saint-Martin",
- "countryNameTM": "Türkmenisztán",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "Új-Kaledónia",
- "countryNameAC": "Ascension-sziget",
- "countryNameBN": "Brunei",
- "countryNameBD": "Banglades",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Kanada",
- "countryNameSH": "Szent Ilona",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongólia",
- "countryNamePA": "Panama",
- "countryNameCM": "Kamerun",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japán",
- "countryNameCY": "Ciprus",
- "countryNameCD": "Kongói Demokratikus Köztársaság",
- "countryNameTN": "Tunézia",
- "countryNameTR": "Törökország",
- "countryNameWS": "Szamoa",
- "countryNameSE": "Svédország",
- "countryNameXK": "Koszovó",
- "countryNameKH": "Kambodzsa",
- "countryNamePL": "Lengyelország",
- "countryNameDZ": "Algéria",
- "countryNameLR": "Libéria",
- "countryNameSO": "Szomália",
- "countryNameDM": "Dominika",
- "countryNameEG": "Egyiptom",
- "countryNameGF": "Francia Guyana",
- "countryNameNZ": "Új-Zéland",
- "countryNamePS": "Palesztin Hatóság",
- "countryNameIL": "Izrael",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Görögország",
- "countryNameNG": "Nigéria",
- "countryNameMR": "Mauritánia",
- "countryNameVI": "Amerikai Virgin-szigetek",
- "countryNameGQ": "Egyenlítői-Guinea",
- "countryNameMX": "Mexikó",
- "countryNameDJ": "Dzsibuti",
- "countryNameGN": "Guinea",
- "countryNameCN": "Kína",
- "countryNameMZ": "Mozambik",
- "countryNameBV": "Bouvet-sziget",
- "countryNameNF": "Norfolk-sziget",
- "countryNameTZ": "Tanzánia",
- "countryNameAI": "Anguilla",
- "countryNameGS": "Déli-Georgia és Déli-Sandwich-szigetek",
- "countryNameRS": "Szerbia",
- "countryNameCC": "Cocos (Keeling)-szigetek",
- "countryNameNA": "Namíbia",
- "countryNameDE": "Németország",
- "countryNameCG": "Kongói Köztársaság",
- "countryNameKW": "Kuvait",
- "countryNameMH": "Marshall-szigetek",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarusz",
- "countryNameMY": "Malajzia",
- "countryNameST": "São Tomé és Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Csád",
- "countryNameCX": "Karácsony-sziget",
- "countryNameIR": "Irán",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Bissau-Guinea",
- "countryNameUA": "Ukrajna",
- "countryNameCU": "Kuba",
- "countryNameCO": "Kolumbia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Horvátország",
- "countryNameSC": "Seychelle-szigetek",
- "countryNameNL": "Hollandia",
- "countryNameUM": "Egyesült Államok lakatlan külbirtokai",
- "countryNameIM": "Man-sziget",
- "countryNameFJ": "Fidzsi-szigetek",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laosz",
- "countryNameGB": "Egyesült Királyság",
- "countryNameBB": "Barbados",
- "countryNameSI": "Szlovénia",
- "countryNameAM": "Örményország",
- "countryNameAR": "Argentína",
- "countryNamePM": "Saint-Pierre és Miquelon",
- "countryNameTF": "Francia déli területek és a déli sarkvidék",
- "countryNameDO": "Dominikai Köztársaság",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugália",
- "countryNameCF": "Közép-afrikai Köztársaság",
- "countryNameBE": "Belgium",
- "countryNameKM": "Comore-szigetek",
- "countryNameLY": "Líbia",
- "countryNameIE": "Írország",
- "countryNameKP": "Észak-Korea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Szlovákia",
- "countryNameTC": "Turks- és Caicos-szigetek",
- "countryNameNP": "Nepál",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Jemen",
- "countryNameBA": "Bosznia-Hercegovina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Irak",
- "countryNameSJ": "Svalbard és Jan Mayen-sziget",
- "countryNameAX": "Åland-szigetek",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Feröer-szigetek",
- "countryNameBL": "Saint-Barthélemy",
- "countryNameLB": "Libanon",
- "countryNameJM": "Jamaica",
- "countryNameAF": "Afganisztán",
- "countryNameES": "Spanyolország",
- "countryNameMC": "Monaco",
- "countryNameSG": "Szingapúr",
- "countryNameAL": "Albánia",
- "countryNameSN": "Szenegál",
- "countryNameSZ": "Szváziföld",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d'Ivoire",
- "countryNameTW": "Tajvan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cook-szigetek",
- "countryNameTH": "Thaiföld",
- "countryNameHM": "Heard-sziget és McDonald-szigetek",
- "countryNameGD": "Grenada",
- "countryNameUS": "Egyesült Államok",
- "countryNameAT": "Ausztria",
- "countryNameKR": "Koreai Köztársaság",
- "countryNamePK": "Pakisztán",
- "countryNameDK": "Dánia",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Etiópia",
- "countryNameMG": "Madagaszkár",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxemburg",
- "countryNameQA": "Katar",
- "countryNameBT": "Bhután",
- "countryNameSB": "Salamon-szigetek",
- "countryNameAE": "Egyesült Arab Emírségek",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua és Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Magyarország",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Svájc",
- "countryNamePN": "Pitcairn-szigetek",
- "countryNameGL": "Grönland",
- "countryNamePH": "Fülöp-szigetek",
- "countryNameMT": "Málta",
- "countryNameKN": "Saint Kitts és Nevis",
- "countryNameLK": "Srí Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Lettország",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "{0} szinkronizálása nem sikerült.",
+ "failureDescription": "Hiba történt, és nem sikerült befejezni a kért szinkronizálást. Próbálja meg újra.",
+ "pending": "{0} szinkronizálása folyamatban",
+ "pendingDescription": "A legutóbbi adatok beolvasása folyamatban van. Ez a folyamat több percet is igénybe vehet.",
+ "success": "{0} szinkronizálás befejeződött",
+ "successDescription": "A WUfB szolgáltatással való szinkronizálás befejeződött: {0}"
+ },
+ "SyncSpinner": {
+ "text": "Folyamatban van egy szinkronizálás. Ez több percet is igénybe vehet. Figyelje a riasztást, vagy térjen vissza néhány perc múlva."
+ },
+ "TabName": {
+ "basics": "Alapadatok",
+ "driverUpdateSettings": "Beállítások",
+ "otherDrivers": "Egyéb illesztőprogramok",
+ "properties": "Tulajdonságok",
+ "recommendedDrivers": "Ajánlott illesztőprogramok"
+ },
+ "driverAddFilter": "Szűrő hozzáadása",
+ "driverApplicableDevices": "Megfelelő eszközök",
+ "driverApprovalStatus": "Állapot",
+ "driverBulkActions": "Tömeges műveletek",
+ "driverClass": "Illesztőprogram besorolása",
+ "driverCount": "{0}–{1}. megjelenítése a(z) {2} rekord közül",
+ "driverFilterNoneSelected": "Egy elem sincs kijelölve",
+ "driverManufacturer": "Gyártó",
+ "driverName": "Illesztőprogram neve",
+ "driverNameLower": "windows illesztőprogram-frissítés üzembe helyezése",
+ "driverNameUpper": "Windows illesztőprogram-frissítés üzembe helyezése",
+ "driverRefresh": "Frissítés",
+ "driverReleaseDate": "Kiadás dátuma",
+ "driverSearch": "Keresés",
+ "driverSearchKeyword": "Adja meg a keresési kulcsszót",
+ "driverVersion": "Verzió",
+ "firstDeploymentDate": "Első üzembe helyezés",
+ "infoBoxText": "A készlet létrehozása a szabályzat hozzárendelése és létrehozása után akár 24 óráig is eltarthat.",
+ "textBlockText": "Válassza ki a szabályzat jóváhagyási és üzembe helyezési beállításait. Beállíthatja, hogy egy szabályzat automatikusan vagy manuálisan hagyja jóvá és telepítse a frissítéseket. A jóváhagyási módszer nem módosítható a szabályzat létrehozása után, de az egyes illesztőprogram-jóváhagyások és az üzembe helyezés részleteinek módosítása a hozzárendelt eszközök készletének létrehozása után lehetséges lesz."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge-konfigurációs beállítások",
+ "edgeWindowsDataProtectionSettings": "Edge (Windows) adatvédelmi beállításai – előzetes verzió",
+ "edgeWindowsSettings": "Edge (Windows) konfigurációs beállításai – előzetes verzió",
+ "generalAppConfig": "Általános alkalmazáskonfiguráció",
+ "generalSettings": "Általános konfigurációs beállítások",
+ "outlookSMIMEConfig": "Az Outlook S/MIME-beállításai",
+ "outlookSettings": "Outlook-konfigurációs beállítások",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-it.json b/Documentation/Strings-it.json
index f737977..e2f073b 100644
--- a/Documentation/Strings-it.json
+++ b/Documentation/Strings-it.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Configurazione della protezione dei dati"
- },
- "OrganizeMailByThread": {
- "title": "Organizza i messaggi in base al thread",
- "tooltip": "Il comportamento predefinito in Outlook prevede l'aggregazione delle conversazioni tramite posta elettronica in una visualizzazione di conversazioni in thread. Se questa impostazione è disabilitata, Outlook visualizzerà ogni messaggio individualmente e non raggrupperà i messaggi in base al thread."
- },
- "Sync": {
- "header": "Configurazione della sincronizzazione dei campi del contatto con i contatti nativi dell'app"
- },
- "allowBiometricsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
- "allowBiometricsTitle": "Rendi obbligatori i dati biometrici per l'accesso all'app",
- "allowBiometricsTooltip": "Le funzionalità di biometria, ad esempio TouchID o FaceID, possono essere obbligatorie per l'accesso degli utenti al proprio dispositivo. Quando sono obbligatorie, le funzionalità di biometria vengono usate in aggiunta al metodo di autenticazione selezionato in questo profilo. Questa impostazione non deve essere abilitata quando sono distribuiti i Criteri di protezione delle app di Intune, perché i criteri di protezione delle app includono requisiti di accesso prima dell'accesso ai dati gestiti. L'abilitazione di entrambe le opzioni provocherà la visualizzazione di più richieste di accesso per l'accesso a Outlook Mobile. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
- "allowCalendarNotificationsTitle": "Notifiche del calendario",
- "allowCalendarNotificationsTooltip": "È possibile consentire alle notifiche del calendario di visualizzare i dettagli completi quando l'impostazione \"Notifiche sui dati dell'organizzazione\" di Criteri di protezione dell'app è impostata su \"Blocca i dati dell'organizzazione\".",
- "allowDefaultAppSignatureTitle": "Firma dell'app predefinita",
- "allowDefaultAppSignatureTooltip": "L\\'opzione Firma dell\\'app predefinita indica se l\\'app userà \\\"Ottieni Outlook per iOS\\\" come firma predefinita durante la composizione del messaggio. Se l\\'impostazione è configurata come Off, la firma predefinita non verrà usata. Gli utenti possono tuttavia aggiungere la propria firma. Se l\\'opzione è impostata su Non configurata, l\\'impostazione predefinita dell\\'app è On.",
- "allowExternalRecipientsMailTipTitle": "Avviso messaggio per destinatari esterni",
- "allowExternalRecipientsMailTipTooltip": "L'Avviso messaggio per destinatari esterni viene visualizzato se il mittente aggiunge un destinatario esterno o se aggiunge un gruppo di distribuzione che include destinatari esterni. Questo avviso messaggio segnala ai mittenti se il messaggio che stanno scrivendo uscirà dall'organizzazione, aiutandoli a prendere le decisioni appropriate a livello di formulazione, tono e contenuto. Disponibile solo per account Exchange Online e account locali che sfruttano i vantaggi dell'autenticazione moderna ibrida. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è On.",
- "allowFocusedInboxTitle": "Posta in arrivo evidenziata",
- "allowFocusedInboxTooltip": "Posta in arrivo evidenziata separa la cartella della posta in arrivo in due schede: Evidenziata e Altra. I messaggi di posta elettronica più importanti si trovano nella scheda Evidenziata, mentre gli altri messaggi rimangono facilmente accessibili, ma non visualizzati, nella scheda Altra. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
- "allowMailNotificationsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
- "allowMailNotificationsTitle": "Notifiche tramite posta elettronica",
- "allowMailNotificationsTooltip": "Questo valore indica se Outlook consentirà le notifiche di posta elettronica. Se si imposta il valore su No, le notifiche di posta elettronica verranno disabilitate.",
- "allowOrgDataOnWearablesTitle": "Dati dell'organizzazione nei dispositivi indossabili",
- "allowOrgDataOnWearablesTooltip": "Questo valore indica se i dati di Outlook possono essere sincronizzati con un dispositivo indossabile. Se si imposta il valore su No, la sincronizzazione con i dispositivi indossabili verrà disabilitata.",
- "allowSaveContactsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione di sincronizzazione relativa al contatto.",
- "allowSaveContactsTitle": "Salva i contatti",
- "allowSaveContactsTooltip": "Il salvataggio dei contatti nella rubrica nativa del dispositivo mobile consente il collegamento di nuove chiamate e SMS con i contatti di Outlook esistenti dell'utente. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
- "allowSmartReplyTitle": "Risposte suggerite",
- "allowSmartReplyTooltip": "Quando si apre un messaggio, è possibile che Outlook suggerisca risposte sotto il messaggio. Se si seleziona una risposta suggerita, è possibile modificarla prima dell'invio. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è On.",
- "allowUserChangeGeneralToolTip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
- "allowUserChangeTitle": "Consenti all'utente di cambiare impostazione",
- "blockExternalImagesAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
- "blockExternalImagesTitle": "Blocca le immagini esterne",
- "blockExternalImagesTooltip": "Quando il blocco delle immagini esterne è abilitato, l'app impedirà il download di immagini ospitate su Internet incorporate nel corpo del messaggio. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
- "disableAddinsTitle": "Consenti componenti aggiuntivi",
- "disableAddinsTooltip": "Per impostazione predefinita, un criterio di protezione delle app consente agli utenti di usare componenti aggiuntivi di terze parti, ma può essere usato per bloccare i componenti aggiuntivi con l'impostazione \"Sincronizza i dati delle app gestite da criteri con app o componenti aggiuntivi nativi\". Se si configura questa impostazione su \"Disattivata\", i componenti aggiuntivi verranno bloccati quando l'impostazione dei criteri di protezione app è impostata su Consentito.",
- "discoverFeedTitle": "Feed di individuazione",
- "discoverFeedTooltip": "Il feed di individuazione espone i file di Office a cui si accede più spesso. Per impostazione predefinita, questo feed viene abilitato quando Delve è abilitato per l'utente. Se non si configura questa opzione, l'impostazione predefinita dell'app è On.",
- "enableSMIMETitle": "Abilita S/MIME",
- "enableSMIMETooltip": "Specificare se i controlli S/MIME sono abilitati o meno durante la composizione di un messaggio di posta elettronica.",
- "encryptAllEmails": "Crittografa tutti i messaggi di posta elettronica",
- "encryptAllEmailsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione Crittografa tutti i messaggi di posta elettronica.",
- "encryptAllEmailsTooltip": "Specificare se tutti i messaggi di posta elettronica devono essere crittografati. La crittografia consente di convertire i dati in un testo crittografato in modo che possano essere letti solo dal destinatario previsto.",
- "ldapUrl": "URL LDAP",
- "ldapUrlTooltip": "Nome host LDAP in cui i client possono ottenere le chiavi di crittografia pubbliche per i destinatari dei messaggi di posta elettronica. I messaggi verranno crittografati quando è disponibile una chiave. Formati supportati: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
- "nativeCalendarSyncMAMOnlyTitle": "Consenti la sincronizzazione del calendario",
- "nativeCalendarSyncMAMOnlyTooltip": "Per impostazione predefinita, un criterio di protezione dell'app consente la sincronizzazione del calendario con l'app Calendario nativa, ma può essere usato per bloccare la disponibilità della sincronizzazione del calendario. Questa impostazione funziona in modo indipendente rispetto all'impostazione Criteri di protezione dell'app e consente alle organizzazioni di determinare se la sincronizzazione del calendario è disponibile per l'account aziendale o dell'istituto di istruzione.",
- "nativeCalendarSyncTitle": "Sincronizza i calendari",
- "nativeCalendarSyncTooltip": "Per impostazione predefinita, un criterio di protezione app consente la sincronizzazione del calendario con l'app Calendario nativa, ma può essere usato per bloccare la disponibilità della sincronizzazione del calendario con l'impostazione \"Sincronizza i dati dell'app gestita da criteri con app o componenti aggiuntivi nativi\". Se si configura questa impostazione su \"Disattivata\", la sincronizzazione del calendario verrà bloccata quando l'impostazione dei criteri di protezione app è impostata su Consentito.",
- "playMyEmailsTitle": "Riproduci i messaggi di posta elettronica",
- "playMyEmailsTooltip": "La funzionalità Riproduci i messaggi di posta elettronica non è abilitata per impostazione predefinita nell'app, ma viene promossa a utenti idonei tramite un banner nella Posta in arrivo. Se questa opzione è impostata su Off, la funzionalità non verrà promossa a utenti idonei nell'app. Gli utenti possono scegliere di abilitare manualmente l'opzione Riproduci i messaggi di posta elettronica dall'app, anche quando questa funzionalità è impostata su Off. Se questa opzione è impostata su Non configurata, l'impostazione predefinita per l'app è On e la funzionalità verrà promossa agli utenti idonei.",
- "signAllEmails": "Firma tutti i messaggi di posta elettronica",
- "signAllEmailsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione Firma tutti i messaggi di posta elettronica.",
- "signAllEmailsTooltip": "Specificare se tutti i messaggi di posta elettronica devono essere firmati. Una firma digitale verifica l'autenticità del messaggio di posta elettronica e assicura che i contenuti non siano stati manomessi durante il transito.",
- "syncAddressTitle": "Indirizzo",
- "syncAddressTooltip": "Questo valore indica se è necessario sincronizzare l'indirizzo del contatto con i contatti nativi.",
- "syncBirthdayTitle": "Data di nascita",
- "syncBirthdayTooltip": "Questo valore indica se è necessario sincronizzare la data di nascita del contatto con i contatti nativi.",
- "syncCompanyTitle": "Società",
- "syncCompanyTooltip": "Questo valore indica se è necessario sincronizzare la società del contatto con i contatti nativi.",
- "syncDepartmentTitle": "Reparto",
- "syncDepartmentTooltip": "Questo valore indica se è necessario sincronizzare il reparto del contatto con i contatti nativi.",
- "syncEmailAddressTitle": "Indirizzo di posta elettronica",
- "syncEmailAddressTooltip": "Questo valore indica se è necessario sincronizzare l'indirizzo di posta elettronica del contatto con i contatti nativi.",
- "syncInstantMessagingAddressTitle": "Indirizzo di messaggistica istantanea",
- "syncInstantMessagingAddressTooltip": "Questo valore indica se è necessario sincronizzare l'indirizzo di messaggistica istantanea del contatto con i contatti nativi.",
- "syncJobTitleTitle": "Posizione professionale",
- "syncJobTitleTooltip": "Questo valore indica se è necessario sincronizzare la posizione del contatto con i contatti nativi.",
- "syncNicknameTitle": "Soprannome",
- "syncNicknameTooltip": "Questo valore indica se è necessario sincronizzare il nome alternativo del contatto con i contatti nativi.",
- "syncNotesTitle": "Notes",
- "syncNotesTooltip": "Questo valore indica se è necessario sincronizzare le note del contatto con i contatti nativi.",
- "syncPhoneHomeFaxNumberTitle": "Telefono - Numero di fax personale",
- "syncPhoneHomeFaxNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di fax personale del contatto con i contatti nativi.",
- "syncPhoneHomeNumberTitle": "Telefono - Numero personale",
- "syncPhoneHomeNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di telefono personale del contatto con i contatti nativi.",
- "syncPhoneMobileNumberTitle": "Telefono - Numero di cellulare",
- "syncPhoneMobileNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di cellulare del contatto con i contatti nativi.",
- "syncPhoneOtherNumberTitle": "Telefono - Altro numero",
- "syncPhoneOtherNumberTooltip": "Questo valore indica se è necessario sincronizzare un altro numero di telefono del contatto con i contatti nativi.",
- "syncPhonePagerNumberTitle": "Telefono - Numero di cercapersone",
- "syncPhonePagerNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di cercapersone del contatto con i contatti nativi.",
- "syncPhoneWorkFaxNumberTitle": "Telefono - Numero di fax aziendale",
- "syncPhoneWorkFaxNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di fax aziendale del contatto con i contatti nativi.",
- "syncPhoneWorkNumberTitle": "Telefono - Numero aziendale",
- "syncPhoneWorkNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di telefono aziendale del contatto con i contatti nativi.",
- "syncPrefixTitle": "Prefisso del nome",
- "syncPrefixTooltip": "Questo valore indica se è necessario sincronizzare il prefisso del nome del contatto con i contatti nativi.",
- "syncSuffixTitle": "Suffisso del nome",
- "syncSuffixTooltip": "Questo valore indica se è necessario sincronizzare il suffisso del nome del contatto con i contatti nativi.",
- "textPredictionsTitle": "Completamenti del testo",
- "textPredictionsTooltip": "Outlook può suggerire parole e frasi durante la composizione di messaggi. Quando Outlook offre un suggerimento, scorrere rapidamente per accettarlo. Quando questa opzione è impostata su Non configurato, l'impostazione predefinita dell'app sarà impostata su On.",
- "themesEnabledTitle": "Temi abilitati",
- "themesEnabledTooltip": "Specificare se l'utente è autorizzato a usare un tema visivo personalizzato."
- },
- "Languages": {
- "ar-aE": "Arabo (Emirati Arabi Uniti)",
- "ar-bH": "Arabo (Bahrein)",
- "ar-dZ": "Arabo (Algeria)",
- "ar-eG": "Arabo (Egitto)",
- "ar-iQ": "Arabo (Iraq)",
- "ar-jO": "Arabo (Giordania)",
- "ar-kW": "Arabo (Kuwait)",
- "ar-lB": "Arabo (Libano)",
- "ar-lY": "Arabo (Libia)",
- "ar-mA": "Arabo (Marocco)",
- "ar-oM": "Arabo (Oman)",
- "ar-qA": "Arabo (Qatar)",
- "ar-sA": "Arabo (Arabia Saudita)",
- "ar-sY": "Arabo (Siria)",
- "ar-tN": "Arabo (Tunisia)",
- "ar-yE": "Arabo (Yemen)",
- "az-cyrl": "Azerbaigiano (alfabeto cirillico, Azerbaigian)",
- "az-latn": "Azerbaigiano (alfabeto latino, Azerbaigian)",
- "bn-bD": "Bengali (Bangladesh)",
- "bn-iN": "Bengali (India)",
- "bs-cyrl": "Bosniaco (alfabeto cirillico)",
- "bs-latn": "Bosniaco (alfabeto latino)",
- "zh-cN": "Cinese (RPC)",
- "zh-hK": "Cinese (RAS di Hong Kong)",
- "zh-mO": "Cinese (RAS di Macao)",
- "zh-sG": "Cinese (Singapore)",
- "zh-tW": "Cinese (Taiwan)",
- "hr-bA": "Croato (alfabeto latino)",
- "hr-hR": "Croato (Croazia)",
- "nl-bE": "Olandese (Belgio)",
- "nl-nL": "Olandese (Paesi Bassi)",
- "en-aU": "Inglese (Australia)",
- "en-bZ": "Inglese (Belize)",
- "en-cA": "Inglese (Canada)",
- "en-cabn": "Inglese (Caraibi)",
- "en-iE": "Inglese (Irlanda)",
- "en-iN": "Inglese (India)",
- "en-jM": "Inglese (Giamaica)",
- "en-mY": "Inglese (Malaysia)",
- "en-nZ": "Inglese (Nuova Zelanda)",
- "en-pH": "Inglese (Repubblica delle Filippine)",
- "en-sG": "Inglese (Singapore)",
- "en-tT": "Inglese (Trinidad e Tobago)",
- "en-uK": "Inglese (Regno Unito)",
- "en-uS": "Inglese (Stati Uniti)",
- "en-zA": "Inglese (Sudafrica)",
- "en-zW": "Inglese (Zimbabwe)",
- "fr-bE": "Francese (Belgio)",
- "fr-cA": "Francese (Canada)",
- "fr-cH": "Francese (Svizzera)",
- "fr-fR": "Francese (Francia)",
- "fr-lU": "Francese (Lussemburgo)",
- "fr-mC": "Francese (Monaco)",
- "de-aT": "Tedesco (Austria)",
- "de-cH": "Tedesco (Svizzera)",
- "de-dE": "Tedesco (Germania)",
- "de-lI": "Tedesco (Liechtenstein)",
- "de-lU": "Tedesco (Lussemburgo)",
- "iu-cans": "Inuktitut (alfabeto sillabico, Canada)",
- "iu-latn": "Inuktitut (alfabeto latino, Canada)",
- "it-cH": "Italiano (Svizzera)",
- "it-iT": "Italiano (Italia)",
- "ms-bN": "Malese (Brunei Darussalam)",
- "ms-mY": "Malese (Malaysia)",
- "mn-cN": "Mongolo (mongolo tradizionale, Repubblica popolare cinese)",
- "mn-mN": "Mongolo (alfabeto cirillico, Mongolia)",
- "no-nB": "Norvegese, bokmål (Norvegia)",
- "no-nn": "Norvegese, Nynorsk (Norvegia)",
- "pt-bR": "Portoghese (Brasile)",
- "pt-pT": "Portoghese (Portogallo)",
- "quz-bO": "Quechua (Bolivia)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Perù)",
- "smj-nO": "Sami, Lule (Norvegia)",
- "smj-sE": "Sami, Lule (Svezia)",
- "se-fI": "Sami settentrionale (Finlandia)",
- "se-nO": "Sami settentrionale (Norvegia)",
- "se-sE": "Sami settentrionale (Svezia)",
- "sma-nO": "Sami meridionale (Norvegia)",
- "sma-sE": "Sami meridionale (Svezia)",
- "smn": "Sami, Inari (Finlandia)",
- "sms": "Sami, Skolt (Finlandia)",
- "sr-Cyrl-bA": "Serbo (alfabeto cirillico)",
- "sr-Cyrl-rS": "Serbo (alfabeto cirillico) (Serbia e Montenegro (ex))",
- "sr-Latn-bA": "Serbo (alfabeto latino)",
- "sr-Latn-rS": "Serbo (alfabeto latino, Serbia)",
- "dsb": "Basso sorabo (Germania)",
- "hsb": "Alto sorabo (Germania)",
- "es-es-tradnl": "Spagnolo (Spagna, ordinamento tradizionale)",
- "es-aR": "Spagnolo (Argentina)",
- "es-bO": "Spagnolo (Bolivia)",
- "es-cL": "Spagnolo (Cile)",
- "es-cO": "Spagnolo (Colombia)",
- "es-cR": "Spagnolo (Costa Rica)",
- "es-dO": "Spagnolo (Repubblica Dominicana)",
- "es-eC": "Spagnolo (Ecuador)",
- "es-eS": "Spagnolo (Spagna)",
- "es-gT": "Spagnolo (Guatemala)",
- "es-hN": "Spagnolo (Honduras)",
- "es-mX": "Spagnolo (Messico)",
- "es-nI": "Spagnolo (Nicaragua)",
- "es-pA": "Spagnolo (Panama)",
- "es-pE": "Spagnolo (Perù)",
- "es-pR": "Spagnolo (Portorico)",
- "es-pY": "Spagnolo (Paraguay)",
- "es-sV": "Spagnolo (El Salvador)",
- "es-uS": "Spagnolo (Stati Uniti)",
- "es-uY": "Spagnolo (Uruguay)",
- "es-vE": "Spagnolo (Venezuela)",
- "sv-fI": "Svedese (Finlandia)",
- "uz-cyrl": "Uzbeko (alfabeto cirillico, Uzbekistan)",
- "uz-latn": "Uzbeco (alfabeto latino, Uzbekistan)",
- "af": "Afrikaans (Sudafrica)",
- "sq": "Albanese (Albania)",
- "am": "Amarico (Etiopia)",
- "hy": "Armeno (Armenia)",
- "as": "Assamese (India)",
- "ba": "Baschiro (Russia)",
- "eu": "Basco (Basco)",
- "be": "Bielorusso (Bielorussia)",
- "br": "Bretone (Francia)",
- "bg": "Bulgaro (Bulgaria)",
- "ca": "Catalano (Catalano)",
- "co": "Corso (Francia)",
- "cs": "Ceco (Repubblica Ceca)",
- "da": "Danese (Danimarca)",
- "dv": "Divehi (Maldive)",
- "et": "Estone (Estonia)",
- "fo": "Faroese (Fær Øer)",
- "fil": "Filippino (Filippine)",
- "fi": "Finlandese (Finlandia)",
- "gl": "Galiziano (Galizia)",
- "ka": "Georgiano (Georgia)",
- "el": "Greco (Grecia)",
- "gu": "Gujarati (India)",
- "ha": "Hausa (alfabeto latino, Nigeria)",
- "he": "Ebraico (Israele)",
- "hi": "Hindi (India)",
- "hu": "Ungherese (Ungheria)",
- "is": "Islandese (Islanda)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonesiano (Indonesia)",
- "ga": "Irlandese (Irlanda)",
- "xh": "Xhosa (Sudafrica)",
- "zu": "Zulu (Sudafrica)",
- "ja": "Giapponese (Giappone)",
- "kn": "Kannada (India)",
- "kk": "Kazako (Kazakhstan)",
- "km": "Khmer (Cambogia)",
- "rw": "Kinyarwanda (Ruanda)",
- "sw": "Swahili (Kenya)",
- "kok": "Konkani (India)",
- "ko": "Coreano (Corea)",
- "ky": "Kirghiso (Kirghizistan)",
- "lo": "Lao (Repubblica democratica popolare del Laos)",
- "lv": "Lettone (Lettonia)",
- "lt": "Lituano (Lituania)",
- "lb": "Lussemburghese (Lussemburgo)",
- "mk": "Macedone (Macedonia del Nord)",
- "ml": "Malayalam (India)",
- "mt": "Maltese (Malta)",
- "mi": "Maori (Nuova Zelanda)",
- "mr": "Marathi (India)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepalese (Nepal)",
- "oc": "Occitano (Francia)",
- "or": "Odia (India)",
- "ps": "Pashto (Afghanistan)",
- "fa": "Persiano",
- "pl": "Polacco (Polonia)",
- "pa": "Punjabi (India)",
- "ro": "Romeno (Romania)",
- "rm": "Romancio (Svizzera)",
- "ru": "Russo (Russia)",
- "sa": "Sanscrito (India)",
- "st": "Sotho del nord (Sudafrica)",
- "tn": "Tswana (Sudafrica)",
- "si": "Singalese (Sri Lanka)",
- "sk": "Slovacco (Slovacchia)",
- "sl": "Sloveno (Slovenia)",
- "sv": "Svedese (Svezia)",
- "syr": "Siriaco (Siria)",
- "tg": "Tagico (alfabeto cirillico, Tagikistan)",
- "ta": "Tamil (India)",
- "tt": "Tartaro (Russia)",
- "te": "Telugu (India)",
- "th": "Thai (Thailandia)",
- "bo": "Tibetano (Repubblica popolare cinese)",
- "tr": "Turco (Turchia)",
- "tk": "Turcomanno (Turkmenistan)",
- "uk": "Ucraino (Ucraina)",
- "ur": "Urdu (Pakistan)",
- "vi": "Vietnamita (Vietnam)",
- "cy": "Gallese (Regno Unito)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (Repubblica popolare cinese)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender per endpoint",
- "androidDeviceOwnerApplications": "Applicazioni",
- "androidDeviceOwnerPolicyMessages": "Informazioni sul supporto personalizzate",
- "androidForWorkPassword": "Password per il dispositivo",
- "appManagement": "Consenti o blocca le app",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "App con restrizioni",
- "applicationVisibility": "Mostra o nascondi le app",
- "applications": "App Store",
- "applicationsAndGames": "App Store, visualizzazione documenti, giochi",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "App ed esperienza",
- "associatedDomains": "Domini associati",
- "autonomousSingleAppMode": "Modalità applicazione singola autonoma",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Crittografia di Windows",
- "bootOptions": "Opzioni di avvio",
- "browser": "Browser",
- "builtinApps": "App predefinite",
- "cameras": "Fotocamere",
- "cellular": "Rete cellulare",
- "cloudAndStorage": "Cloud e risorse di archiviazione",
- "cloudPrint": "Stampante cloud",
- "complianceEmailProfile": "Posta elettronica",
- "connectedDevices": "Dispositivi connessi",
- "connectivity": "Rete cellulare e connettività",
- "contentCaching": "Memorizzazione nella cache dei contenuti",
- "controlPanelAndSettings": "Pannello di controllo e impostazioni",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Conformità personalizzata",
- "customConfiguration": "Profilo di configurazione personalizzato",
- "customOMASettings": "Impostazioni OMA-URI personalizzate",
- "customPreferences": "File delle preferenze",
- "dFCISecuritySettings": "Impostazioni di sicurezza",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows Firewall",
- "defenderLocalSecurityOptions": "Opzioni di sicurezza per i dispositivi locali",
- "defenderSecurityCenter": "Microsoft Defender Security Center",
- "deliveryOptimization": "Ottimizzazione recapito",
- "derivedCredentialAuthenticationConfiguration": "Credenziale derivata",
- "deviceExperience": "Esperienza del dispositivo",
- "deviceFirmwareConfigurationInterface": "Interfaccia di configurazione del firmware del dispositivo",
- "deviceGuard": "Controllo di applicazioni di Microsoft Defender",
- "deviceHealth": "Integrità del dispositivo",
- "devicePassword": "Password per il dispositivo",
- "deviceProperties": "Proprietà del dispositivo",
- "deviceRestrictions": "Generale",
- "deviceSecurity": "Sicurezza del sistema",
- "display": "Visualizza",
- "domainJoin": "Aggiunta a un dominio",
- "domains": "Domini",
- "edgeBrowser": "Microsoft Edge legacy (versione 45 e precedenti)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Modalità tutto schermo di Microsoft Edge",
- "editionUpgrade": "Aggiornamento edizione",
- "education": "Istruzione",
- "educationDeviceCerts": "Certificati del dispositivo",
- "educationStudentCerts": "Certificati per studenti",
- "educationTakeATest": "Test ed esami",
- "educationTeacherCerts": "Certificati per docenti",
- "emailProfile": "Posta elettronica",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Estensione dell'app per l'accesso Single Sign-On",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Giochi",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Monitoraggio dello stato",
- "homeScreenLayout": "Layout della schermata iniziale",
- "iOSWallpaper": "Sfondo",
- "importedPFX": "Certificato PKCS importato",
- "iosDefenderAtp": "Microsoft Defender per endpoint",
- "iosKiosk": "Tutto schermo",
- "kernelExtensions": "Estensioni del kernel",
- "keyboardAndDictionary": "Tastiera e dizionario",
- "kiosk": "Tutto schermo",
- "kioskAndroidEnterprise": "Dispositivi dedicati",
- "kioskConfiguration": "Tutto schermo",
- "kioskConfigurationV2": "Tutto schermo",
- "kioskWebBrowser": "Web browser in modalità tutto schermo",
- "lockScreenMessage": "Messaggio della schermata di blocco",
- "lockedScreenExperience": "Esperienza della schermata bloccata",
- "logging": "Creazione di report e telemetria",
- "loginItems": "Elementi di accesso",
- "loginWindow": "Finestra di accesso",
- "macDefenderAtp": "Microsoft Defender per endpoint",
- "maintenance": "Manutenzione",
- "malware": "Malware",
- "messaging": "Messaggistica",
- "microphonesAndSpeakers": "Microfoni e altoparlanti",
- "networkBoundary": "Limite di rete",
- "networkProxy": "Proxy di rete",
- "notifications": "Notifiche dell'app",
- "pKCS": "Certificato PKCS",
- "password": "Password",
- "personalProfile": "Profilo personale",
- "personalization": "Personalizzazione",
- "policyOverride": "Esegui l'override dei criteri di gruppo",
- "ports": "Porte",
- "powerSettings": "Impostazioni risparmio energia",
- "printer": "Stampante",
- "privacy": "Riservatezza",
- "privacyPerApp": "Eccezioni alla privacy per app",
- "privacyPreferences": "Preferenze per la privacy",
- "projection": "Proiezione",
- "radios": "Radio",
- "sCCMCompliance": "Conformità di Configuration Manager",
- "sCEP": "Certificato SCEP",
- "sCEPProperties": "Certificato SCEP",
- "sMode": "Cambio di modalità (solo Windows Insider)",
- "safari": "Safari",
- "search": "Cerca",
- "session": "Sessione",
- "sharedDevice": "iPad condiviso",
- "sharedPCAccountManager": "Dispositivo multiutente condiviso",
- "singleSignOn": "Single Sign-On",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Impostazioni",
- "start": "Avvia",
- "systemExtensions": "Estensioni del sistema",
- "systemSecurity": "Sicurezza del sistema",
- "trustedCert": "Certificato attendibile",
- "uEFIAccess": "Accesso UEFI",
- "updates": "Aggiornamenti",
- "userRights": "Diritti utente",
- "usersAndAccounts": "Utenti e account",
- "vPN": "VPN di base",
- "vPNApps": "VPN automatico",
- "vPNAppsAndTrafficRules": "Regole delle app e del traffico",
- "vPNConditionalAccess": "Accesso condizionale",
- "vPNConnectivity": "Connettività",
- "vPNDNSTriggers": "Impostazioni DNS",
- "vPNIKEv2": "Impostazioni IKEv2",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Split tunneling",
- "vPNTrustedNetwork": "Rilevamento della rete attendibile",
- "wakeSettings": "Impostazioni di riattivazione",
- "webContentFilter": "Filtro contenuto Web",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender per endpoint",
- "windowsDefenderATP": "Microsoft Defender per endpoint",
- "windowsHelloForBusiness": "Windows Hello for Business",
- "windowsSpotlight": "Windows Spotlight",
- "wiredNetwork": "Rete cablata",
- "wireless": "Wireless",
- "wirelessProjection": "Proiezione wireless",
- "workProfile": "Impostazioni del profilo di lavoro",
- "workProfilePassword": "Password del profilo di lavoro",
- "xboxServices": "Servizi Xbox",
- "zebraMx": "Profilo MX (solo Zebra)",
- "complianceActionsLabel": "Azioni per la non conformità"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Descrizione"
- },
- "FeatureDeploymentSettings": {
- "header": "Impostazioni di distribuzione delle funzionalità"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Questa funzionalità non può effettuare il downgrade di un dispositivo.",
- "label": "Aggiornamento delle funzionalità da distribuire"
- },
- "GradualRolloutEndDate": {
- "label": "Disponibilità del gruppo finale"
- },
- "GradualRolloutInterval": {
- "label": "Giorni tra gruppi"
- },
- "GradualRolloutStartDate": {
- "label": "Prima disponibilità del gruppo"
- },
- "Name": {
- "label": "Nome"
- },
- "OptionalUpdate": {
- "label": "Aggiornamento obbligatorio o facoltativo"
- },
- "RolloutOptions": {
- "label": "Opzioni di implementazione"
- },
- "RolloutSettings": {
- "header": "Quando si desidera rendere disponibile l'aggiornamento in Windows Update?"
- },
- "ScopeSettings": {
- "header": "Configurare i tag di ambito per questo criterio."
- },
- "StartDateOnlyStartDate": {
- "label": "Prima data disponibile"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Disabilitato",
- "enabled": "Abilitato",
- "infoBalloonContent": "Controllare se installare l'ultimo aggiornamento delle funzionalità di Windows 10 nei dispositivi non idonei per Windows 11",
- "label": "Quando un dispositivo non è idoneo per l'esecuzione di Windows 11, installa l'ultimo aggiornamento delle funzionalità Windows 10",
- "notApplicable": "Non applicabile",
- "summaryLabel": "Installa Windows 10 nei dispositivi non idonei per l'esecuzione di Windows 11"
- },
- "bladeTitle": "Distribuzione di aggiornamenti delle funzionalità",
- "deploymentSettingsTitle": "Impostazioni di distribuzione",
- "loadError": "Il caricamento non è riuscito.",
- "windows11EULA": "Selezionando questo aggiornamento delle funzionalità per la distribuzione, accetti che quando si applica questo sistema operativo a un dispositivo (1) la licenza di Windows applicabile sia stata acquistata tramite contratti multilicenza o (2) che l'utente sia autorizzato a associare l'organizzazione e accetti per suo conto le Condizioni di licenza software Microsoft pertinente disponibile qui {0}."
- },
- "Notifications": {
- "deploymentSaved": "Il salvataggio di \"{0}\" è stato completato.",
- "newFeatureUpdateDeploymentCreated": "È stata creata una nuova distribuzione di aggiornamenti delle funzionalità."
- },
- "TabName": {
- "deploymentSettings": "Impostazioni di distribuzione",
- "groupAssignmentSettings": "Assegnazioni",
- "scopeSettings": "Tag di ambito"
- },
- "gradualRolloutLicenseWarning": "Questa funzionalità richiede licenze specifiche.",
- "gradualRolloutLicenseWarningEdit": "Questa funzionalità può continuare a essere usata e configurata fino a quando il criterio non viene salvato senza questa funzionalità selezionata.",
- "licenseLearnMoreText": "Altre informazioni sui prerequisiti e sui criteri di aggiornamento delle funzionalità.",
- "optionalUpdateWarning": "Facoltativo è disponibile solo per gli aggiornamenti di Windows 11",
- "profileNameWarning": "Il nome deve contenere meno di 64 caratteri",
- "specificLicensingRequired": "Alcune funzionalità selezionate richiedono licenze specifiche."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Consenti l'uso di lettere minuscole nel PIN",
- "notAllow": "Non consentire l'uso di lettere minuscole nel PIN",
- "requireAtLeastOne": "Richiedi l'uso di almeno una lettera minuscola nel PIN"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Consenti l'uso di caratteri speciali nel PIN",
- "notAllow": "Non consentire l'uso di caratteri speciali nel PIN",
- "requireAtLeastOne": "Richiedi l'uso di almeno un carattere speciale nel PIN"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Consenti l'uso di lettere maiuscole nel PIN",
- "notAllow": "Non consentire l'uso di lettere maiuscole nel PIN",
- "requireAtLeastOne": "Richiedi l'uso di almeno una lettera maiuscola nel PIN"
- }
+ "InstallContextType": {
+ "device": "Dispositivo",
+ "deviceContext": "Contesto di dispositivo",
+ "user": "Utente",
+ "userContext": "Contesto utente"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "Versione dell'app",
- "dependencyName": "Nome della dipendenza",
- "lastModifiedTime": "Ora ultima modifica",
- "relationship": "Relazione",
- "replaced": "Sostituito",
- "searchPlaceholder": "Filtra per nome dell'app",
- "status": "Dettagli stato",
- "statusDetails": "Stato",
- "supersedenceName": "Nome sostituzione"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Dipendenza figlio",
- "indirectSupersedence": "Non direttamente correlato",
- "supersedenceAncestors": "Sostituzione in corso",
- "supersedenceDescendants": "Sostituito"
- },
- "SupersededReplaced": {
- "no": "No",
- "yes": "Sì"
- },
- "Tabs": {
- "chart": "Grafico",
- "dependency": "Dipendenza",
- "label": "Visualizza: ",
- "supersedence": "Sostituzione",
- "table": "Tabella"
- },
- "dependencyGraphAriaLabel": "Grafico sulle dipendenze dell'app",
- "supersedenceGraphAriaLabel": "Grafico sostituzione app"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Selezionare uno script di individuazione",
- "scriptFileLabel": "Selezionare lo script di individuazione"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Se questa opzione è abilitata, i dispositivi devono essere conformi alle regole personalizzate definite in un file JSON in base ai dati personalizzati restituiti da uno script PowerShell di individuazione.",
- "label": "La conformità personalizzata è attualmente disponibile in versione anteprima. Una volta entrata nella fase di disponibilità generale, sarà possibile aggiungerla con un costo aggiuntivo alle opzioni di licenza che includono Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Script",
- "placeholder": "Fare clic per selezionare",
- "searchboxPlaceholder": "Cerca per nome dello script",
- "title": "Selezionare uno script di individuazione"
- },
- "SummaryGrid": {
- "ariaLabel": "Riepilogo delle regole di conformità personalizzate"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "È necessaria un'azione di blocco per tutti i criteri di conformità.",
+ "graceperiod": "Pianifica (giorni dopo la non conformità)",
+ "graceperiodInfo": "Specificare il numero di giorni di non conformità dopo i quali è necessario attivare questa azione per il dispositivo dell'utente",
+ "subtitle": "Specificare i parametri dell'azione",
+ "title": "Parametri dell'azione"
+ },
+ "List": {
+ "gracePeriodDay": "{0} giorno dopo la non conformità",
+ "gracePeriodDays": "{0} giorni dopo la non conformità",
+ "gracePeriodHour": "{0} ora dopo la non conformità",
+ "gracePeriodHours": "{0} ore dopo la non conformità",
+ "gracePeriodMinute": "{0} minuto dopo la non conformità",
+ "gracePeriodMinutes": "{0} minuti dopo la non conformità",
+ "immediately": "Immediatamente",
+ "schedule": "Pianifica",
+ "scheduleInfoBalloon": "Giorni dopo la non conformità",
+ "subtitle": "Specificare la sequenza di azioni nei dispositivi non conformi",
+ "title": "Azioni"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Altri",
+ "additionalRecipients": "Altri destinatari (tramite posta elettronica)",
+ "additionalRecipientsBladeTitle": "Selezionare destinatari aggiuntivi",
+ "emailAddressPrompt": "Immettere gli indirizzi di posta elettronica (separati da virgole)",
+ "invalidEmail": "L'indirizzo di posta elettronica non è valido",
+ "messageTemplate": "Modello di messaggio",
+ "noneSelected": "Nessuna selezione",
+ "notSelected": "Non selezionato",
+ "numSelected": "{0} selezionati",
+ "selected": "Selezionata"
},
- "UploadFile": {
- "jsonFileLabel": "Caricare e convalidare il file JSON con le impostazioni di conformità personalizzate",
- "noFileSelectedError": "Selezionare un file JSON",
- "parseFileSelectedError": "Il file JSON non è valido"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filtro",
- "noFilters": "Nessuno"
- },
- "Platform": {
- "all": "Tutto",
- "android": "Amministratore di dispositivi Android",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Comune",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS e Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Sconosciuto",
- "unsupported": "Non supportato",
- "windows": "Windows",
- "windows10": "Windows 10 e versioni successive",
- "windows10CM": "Windows 10 e versioni successive (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 e versioni successive",
- "windows8And10": "Windows 8 e 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 e versioni successive",
- "windows10AndWindowsServer": "Windows 10, Windows 11 e Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 e versioni successive (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "PC Windows"
- },
+ "block": "Contrassegna il dispositivo come non conforme",
+ "lockDevice": "Blocca il dispositivo (azione locale)",
+ "lockDeviceWithPasscode": "Blocca il dispositivo (azione locale)",
+ "noAction": "Nessuna azione",
+ "noActionRow": "Nessuna azione, selezionare 'Aggiungi' per aggiungere un'azione",
+ "pushNotification": "Invia una notifica push all'utente finale",
+ "remoteLock": "Blocca in remoto il dispositivo non conforme",
+ "removeSourceAccessProfile": "Rimuovi il profilo di accesso di origine",
+ "retire": "Aggiungere dispositivo all'elenco di ritiro",
+ "wipe": "Cancella",
+ "emailNotification": "Invia un messaggio di posta elettronica all'utente finale"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Gruppi di amministratori",
+ "RoleAssignmentAdminDesc": "Gli utenti del gruppo di amministratori sono gli amministratori assegnati a questo ruolo",
+ "rolesMenuTitle": "Ruoli di Endpoint Manager",
+ "RoleAssignmentScopeDesc": "Gli amministratori in questa assegnazione di ruolo possono specificare criteri, applicazioni e attività remote",
+ "RoleAssignmentScope": "Gruppi di ambiti"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "Informazioni sull'app",
"nameForOfficeSuitApp": "Informazioni sulla famiglia di prodotti dell'app"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "Nei dispositivi Android è possibile consentire l'uso dell'identificazione tramite impronta digitale anziché tramite PIN. Agli utenti viene richiesto di fornire l'impronta digitale per accedere all'app con l'account aziendale.",
- "iOS": "Nei dispositivi iOS/iPadOS è possibile consentire l'uso dell'identificazione tramite impronta digitale anziché tramite PIN. Agli utenti viene richiesto di fornire l'impronta digitale per accedere all'app con l'account aziendale.",
- "mac": "Nei dispositivi Mac è possibile consentire l'uso dell'identificazione tramite impronta digitale anziché tramite PIN. Agli utenti viene richiesto di fornire l'impronta digitale per accedere all'app con l'account aziendale."
- },
- "allowWidgetContentSync": "Scegliere Blocca per impedire alle app gestite da criteri di salvare i dati nei widget delle app. Se si sceglie Consenti, l'app gestita da criteri può salvare i dati nei widget dell'app, se tali funzionalità sono supportate e abilitate all'interno dell'app gestita da criteri. \r\n\r\n \r\n\r\nLe app possono fornire funzionalità di configurazione aggiuntive con i criteri di configurazione delle app. Per ulteriori informazioni, vedere la documentazione dell'app.",
- "appSharingFromLevel1": "Selezionare una delle opzioni seguenti per specificare le app da cui questa app può ricevere dati:",
- "appSharingFromLevel2": "{0}: consente la ricezione di dati nei documenti o negli account dell'organizzazione solo da altre app gestite da criteri",
- "appSharingFromLevel3": "{0}: consente la ricezione di dati nei documenti o negli account dell'organizzazione da qualsiasi app",
- "appSharingFromLevel4": "{0}: non consente la ricezione di dati nei documenti o negli account dell'organizzazione da qualsiasi app",
- "appSharingFromLevel5": "{0}: è possibile consentire il trasferimento dei dati da qualsiasi app e gestire tutti i dati in ingresso privi di identità utente come dati dell'organizzazione.",
- "appSharingToLevel1": "Selezionare una delle opzioni seguenti per specificare le app a cui questa app può inviare dati:",
- "appSharingToLevel2": "{0}: consente l'invio di dati dell'organizzazione solo verso altre app gestite da criteri",
- "appSharingToLevel3": "{0}: consente l'invio di dati dell'organizzazione a qualsiasi app",
- "appSharingToLevel4": "{0}: non consente l'invio di dati dell'organizzazione a qualsiasi app",
- "appSharingToLevel5": "{0}: è possibile consentire il trasferimento solo ad altre app gestite da criteri e il trasferimento di file ad altre app gestite da MDM nei dispositivi registrati",
- "appSharingToLevel6": "{0}: è possibile consentire il trasferimento solo ad altre app gestite da criteri e l'applicazione di filtri alle finestre di dialogo Apri in/Condividi per il sistema operativo in modo che vengano visualizzate solo le app gestite da criteri",
- "assignmentFilterEdit1": "Se si applicano filtri di assegnazione a questo criterio, la proprietà 'Tipo di gestione dispositivi' verrà applicata oltre ai valori specificati per 'Imposta come destinazione le app in tutti i tipi di dispositivo' e 'Tipi di dispositivo' nella pagina 'App'.",
- "assignmentFilterEdit2": "Altre informazioni sull'assegnazione dei criteri di protezione dell'app.",
- "conditionalEncryption1": "Selezionare {0} per disabilitare la crittografia delle app per le risorse di archiviazione delle app interne quando la crittografia dei dispositivi viene rilevata in un dispositivo registrato.",
- "conditionalEncryption2": "Nota: Intune può rilevare la registrazione dei dispositivi solo con Intune MDM. Le risorse di archiviazione delle app esterne saranno ancora crittografate per assicurare che i dati non siano accessibili da applicazioni non gestite.",
- "contactSyncMac": "Se questa opzione è disabilitata, le app non possono salvare contatti nella rubrica nativa.",
- "contactsSync": "Scegliere Blocca per impedire alle app gestite da criteri di salvare i dati nelle app native del dispositivo, ad esempio Contatti, Calendario e widget, o per impedire l'uso di componenti aggiuntivi all'interno delle app gestite da criteri. Se si sceglie Consenti, l'app gestita da criteri può salvare i dati nelle app native o usare i componenti aggiuntivi, se queste funzionalità sono supportate e abilitate nell'app gestita da criteri.
Le app possono fornire funzionalità di configurazione aggiuntive con i criteri di configurazione dell'app. Per ulteriori informazioni, vedere la documentazione dell'app.",
- "deviceTypeTargetingCreate1": "La destinazione del tipo di dispositivo è stata spostata nel passaggio Assegnazioni nella creazione dei criteri.",
- "deviceTypeTargetingEdit1": "Se si applicano filtri di assegnazione a questo criterio, la proprietà 'Tipo di gestione dispositivi' verrà applicata oltre ai valori specificati per 'Imposta come destinazione le app in tutti i tipi di dispositivo' e 'Tipi di dispositivo' nella pagina 'App'.",
- "deviceTypeTargetingEdit2": "Per modificare la destinazione del tipo di gestione dei dispositivi, reimpostare 'Imposta come destinazione le app in tutti i tipi di dispositivo' = 'Sì'. Creare quindi un filtro di assegnazione MAM con i valori desiderati per 'Tipo di gestione dispositivo'.",
- "deviceTypeTargetingHasMoved": "Altre informazioni sull'assegnazione dei criteri di protezione dell'app",
- "encryptionAndroid1": "Per le app associate a criteri di gestione dei dispositivi mobili di Intune, la crittografia è fornita da Microsoft. I dati sono crittografati in modo sincrono durante le operazioni di I/O dei file in base all'impostazione specificata nei criteri di gestione delle applicazioni per dispositivi mobili. Le app gestite in Android usano la crittografia AES-128 in modalità CBC usando le librerie di crittografia della piattaforma. Il metodo di crittografia non è conforme con FIPS 140-2. La crittografia SHA-256 è supportata come un'istruzione esplicita usando il parametro SigAlg e funziona solo sui dispositivi con versione 4.2 e successive. Il contenuto nell'archiviazione del dispositivo è sempre crittografato.",
- "encryptionAndroid2": "Quando si richiede la crittografia tramite i criteri dell'app, l'utente finale deve configurare e usare un PIN per accedere al dispositivo. Se non è stato impostato un PIN per l'accesso al dispositivo, le app non verranno avviate e l'utente finale visualizzerà un messaggio che indica che l'azienda ha richiesto di impostare un PIN del dispositivo per accedere all'applicazione.",
- "encryptionMac1": "Per le app associate a criteri di gestione dei dispositivi mobili di Intune, la crittografia è fornita da Microsoft. I dati sono crittografati in modo sincrono durante le operazioni di I/O dei file in base all'impostazione specificata nei criteri di gestione delle applicazioni per dispositivi mobili. Le app gestite in Mac usano la crittografia AES-128 in modalità CBC usando le librerie di crittografia della piattaforma. Il metodo di crittografia non è conforme con FIPS 140-2. La crittografia SHA-256 è supportata come un'istruzione esplicita usando il parametro SigAlg e funziona solo sui dispositivi con versione 4.2 e successive. Il contenuto nell'archiviazione del dispositivo è sempre crittografato.",
- "faceId1": "Se applicabile, è possibile consentire l'uso di Identificazione viso invece del PIN. Agli utenti viene richiesto di fornire l'identificazione viso quando accedono all'app con i propri account aziendali.",
- "faceId2": "Selezionare Sì per consentire l'Identificazione viso invece di un PIN per l'accesso all'app.",
- "managementLevelsAndroid1": "Usare questa opzione per specificare se il criterio è applicabile ai dispositivi dell'amministratore di dispositivi Android, ai dispositivi Android Enterprise o ai dispositivi non gestiti.",
- "managementLevelsAndroid2": "{0}: i dispositivi non gestiti sono dispositivi in cui la gestione di Intune MDM non è stata rilevata. Sono inclusi fornitori MDM di terze parti.",
- "managementLevelsAndroid3": "{0}: dispositivi gestiti da Intune che usano l'API Android Device Administration.",
- "managementLevelsAndroid4": "{0}: dispositivi gestiti da Intune che usano i profili di lavoro di Android Enterprise o la gestione dispositivi completa di Android Enterprise.",
- "managementLevelsIos1": "Usare questa opzione per specificare se questo criterio è applicabile ai dispositivi MDM gestiti o ai dispositivi non gestiti.",
- "managementLevelsIos2": "{0}: i dispositivi non gestiti sono dispositivi in cui la gestione di Intune MDM non è stata rilevata. Sono inclusi fornitori MDM di terze parti.",
- "managementLevelsIos3": "{0}: i dispositivi gestiti sono gestiti da Intune MDM.",
- "minAppVersion": "Definire il numero di versione minimo obbligatorio dell'app che un utente deve avere per ottenere l'accesso sicuro all'app.",
- "minAppVersionWarning": "Definire il numero di versione minimo consigliato dell'app che un utente deve avere per un accesso sicuro all'app.",
- "minOsVersion": "Definire il numero di versione minimo obbligatorio del sistema operativo che un utente deve avere per ottenere l'accesso sicuro all'app.",
- "minOsVersionWarning": "Definire il numero di versione minimo consigliato del sistema operativo che un utente deve avere per ottenere l'accesso sicuro all'app.",
- "minPatchVersion": "Definire il livello di patch di protezione meno recente obbligatorio per Android consentito a un utente per ottenere l'accesso sicuro all'app.",
- "minPatchVersionWarning": "Definire il livello di patch di protezione meno recente consigliato per Android consentito a un utente per l'accesso sicuro all'app.",
- "minSdkVersion": "Definire la versione minima obbligatoria di Intune Application Protection Policy SDK che un utente deve avere per ottenere l'accesso sicuro all'app.",
- "requireAppPinDefault": "
Selezionare Sì per disabilitare il PIN dell'app quando un blocco del dispositivo viene rilevato in un dispositivo registrato.
",
- "targetAllApps1": "Usare questa opzione per specificare come destinazione del criterio le app nei dispositivi con qualsiasi stato di gestione.",
- "targetAllApps2": "Durante la risoluzione del conflitto tra i criteri questa impostazione verrà sostituita se un utente ha un criterio destinato a uno stato di gestione specifico.",
- "touchId2": "Selezionare {0} per richiedere l'identificazione tramite impronta digitale anziché un PIN per l'accesso all'app."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Specificare il numero di giorni che devono trascorrere prima che sia necessaria la reimpostazione del PIN da parte dell'utente.",
- "previousPinBlockCount": "Questa impostazione consente di specificare il numero di PIN precedenti che verranno conservati da Intune. Eventuali nuovi PIN devono essere diversi da quelli conservati da Intune."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Consentirà a Windows Search di continuare a eseguire ricerche nei dati crittografati.",
- "authoritativeIpRanges": "Abilitare questa impostazione se si vuole eseguire l'override del rilevamento automatico Windows degli intervalli di indirizzi IP.",
- "authoritativeProxyServers": "Abilitare questa impostazione se si vuole eseguire l'override del rilevamento automatico Windows dei server proxy.",
- "checkInput": "Verifica la validità dell'input",
- "dataRecoveryCert": "Un certificato di ripristino è un certificato EFS (Encrypting File System) speciale che consente di recuperare i file crittografati in caso di perdita o danneggiamento della chiave di crittografia. È necessario creare il certificato di ripristino e specificarlo qui. Per altre informazioni, vedere qui",
- "enterpriseCloudResources": "
Specificare le risorse cloud da considerare aziendali e da proteggere con il criterio di Windows Information Protection. È possibile specificare più risorse separando le singole voci con il carattere '|'.
Se nell'azienda è stato configurato un proxy, è possibile specificare il proxy tramite cui verrà instradato il traffico alle risorse cloud specificate.
URL[,Proxy]|URL[,Proxy]
Senza proxy: contoso.sharepoint.com|contoso.visualstudio.com Con proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Specificare gli intervalli IPv4 che costituiscono la rete aziendale. Questi intervalli vengono usati insieme ai nomi di dominio di rete aziendale specificati per definire il limite di rete aziendale.
Questa impostazione è necessaria per abilitare Windows Information Protection.
È possibile specificare più intervalli separando le singole voci con una virgola.
Ad esempio: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
- "enterpriseIPv6Ranges": "
Specificare gli intervalli IPv6 che costituiscono la rete aziendale. Questi intervalli vengono usati insieme ai nomi di dominio di rete aziendale specificati per definire il limite di rete aziendale.
È possibile specificare più intervalli separando le singole voci con una virgola.
Ad esempio: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
- "enterpriseInternalProxyServers": "
Se nell'azienda è stato configurato un proxy, è possibile specificare il proxy tramite cui instradare il traffico alle risorse cloud specificate nelle impostazioni Risorse cloud aziendali.
È possibile specificare più valori separando le singole voci con un punto e virgola.
Ad esempio: contoso.internalproxy1.com;contoso.internalproxy2.com
",
- "enterpriseNetworkDomainNames": "
Specificare i nomi DNS che costituiscono la rete aziendale. Questi nomi vengono usati insieme agli intervalli IP specificati per definire il limite di rete aziendale. È possibile specificare più valori separando le singole voci con una virgola.
Questa impostazione è necessaria per abilitare Windows Information Protection.
Ad esempio: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Specificare i nomi DNS che costituiscono la rete aziendale. Questi nomi vengono usati insieme agli intervalli IP specificati per definire il limite di rete aziendale. È possibile specificare più valori separando le singole voci con una barra verticale '|'.
Questa impostazione è necessaria per abilitare Windows Information Protection.
Ad esempio: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
Se nella rete aziendale sono presenti proxy con accesso all'esterno, specificarli qui. Quando si specifica un indirizzo del server proxy, è necessario specificare anche la porta tramite cui il traffico deve essere consentito e protetto con Windows Information Protection.
Nota: questo elenco non deve includere i server presenti nell'elenco Server proxy interni aziendali. È possibile specificare più valori separando le singole voci con un punto e virgola.
Ad esempio: proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "Specifica l'intervallo di tempo massimo (in minuti) consentito in caso di inattività del dispositivo dopo il quale il dispositivo verrà bloccato tramite PIN o password. Gli utenti possono selezionare qualsiasi valore di timeout inferiore all'intervallo di tempo massimo specificato nell'app Impostazioni. Si noti che per Lumia 950 e 950XL è previsto un valore di timeout massimo di 5 minuti, indipendentemente dal valore configurato da questo criterio.",
- "maxInactivityTime2": "0 (valore predefinito): non viene definito alcun timeout. Il valore predefinito '0' viene interpretato come 'Nessun timeout definito'.",
- "maxPasswordAttempts1": "Questo criterio presenta comportamenti diversi nei dispositivi mobili e nei computer desktop.",
- "maxPasswordAttempts2": "Quando l'utente raggiunge il valore impostato da questo criterio in un dispositivo mobile, vengono cancellati i dati del dispositivo.",
- "maxPasswordAttempts3": "Quando l'utente raggiunge il valore impostato da questo criterio in un computer desktop, non vengono cancellati i dati. Viene attivata nel computer desktop la modalità di ripristino BitLocker, che rende i dati inaccessibili ma recuperabili. Se BitLocker non è abilitato, non è possibile applicare il criterio.",
- "maxPasswordAttempts4": "Prima di raggiungere il limite di tentativi non riusciti, l'utente viene inviato alla schermata di blocco e viene visualizzato un avviso che indica che altri tentativi non riusciti comporteranno il blocco del computer. Quando l'utente raggiunge il limite, il dispositivo si riavvia automaticamente e mostra la pagina di ripristino BitLocker, che richiede all'utente la chiave di ripristino di BitLocker.",
- "maxPasswordAttempts5": "0 (valore predefinito): i dati del dispositivo non vengono mai cancellati dopo l'immissione di un PIN errato o di una password non valida.",
- "maxPasswordAttempts6": "Il valore più sicuro è 0 se tutti i valori del criterio sono uguali a 0. In caso contrario, il valore del criterio minimo è il valore più sicuro.",
- "mdmDiscoveryUrl": "Specificare l'URL per l'endpoint di registrazione MDM che verrà usato dagli utenti che si registrano in MDM. Per impostazione predefinita, viene specificato questo valore per Intune.",
- "minimumPinLength1": "Valore intero che imposta il numero minimo di caratteri necessari per il PIN. Il valore predefinito è 4. Il numero minimo configurabile per questa impostazione del criterio è 4. Il numero massimo configurabile deve essere inferiore al numero configurato nell'impostazione del criterio Lunghezza massima del PIN o 127, a seconda di quale sia il valore più basso.",
- "minimumPinLength2": "Se si configura questa impostazione del criterio, la lunghezza del PIN deve essere superiore o uguale a questo numero. Se si disabilita o non si configura questa impostazione del criterio, la lunghezza deve essere superiore o uguale a 4.",
- "name": "Nome di questo limite di rete",
- "neutralResources": "
Se nell'azienda sono disponibili endpoint di reindirizzamento dell'autenticazione, specificarli qui. Le posizioni specificate qui vengono considerate personali o aziendali in base al contesto della connessione prima del reindirizzamento.
È possibile specificare più valori separando le singole voci con una virgola.
Ad esempio: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Valore che imposta Windows Hello for Business come metodo per l'accesso a Windows.",
- "passportForWork2": "Il valore predefinito è true. Se si imposta questo criterio su false, l'utente può effettuare il provisioning di Windows Hello for Business solo nei dispositivi mobili aggiunti a Microsoft Entra in cui è obbligatorio il provisioning.",
- "pinExpiration": "Il numero massimo configurabile per questa impostazione del criterio è 730. Il numero minimo configurabile per questa impostazione del criterio è 0. Se si imposta il criterio su 0, il PIN dell'utente non scadrà mai.",
- "pinHistory1": "Il numero massimo configurabile per questa impostazione del criterio è 50. Il numero minimo configurabile per questa impostazione del criterio è 0. Se si imposta il criterio su 0, l'archiviazione dei PIN precedenti non è necessaria.",
- "pinHistory2": "Il PIN attuale dell'utente viene incluso nel set di PIN associati all'account utente. La cronologia del PIN non viene conservata tramite una reimpostazione del PIN.",
- "protectUnderLock": "Protegge il contenuto dell'app quando il dispositivo è bloccato.",
- "protectionModeBlock": "
Blocca: impedisce l'uscita dei dati aziendali dalle app protette.
",
- "protectionModeOff": "
No: l'utente può spostare i dati all'esterno delle app protette. Non viene registrata alcuna azione.
",
- "protectionModeOverride": "
Consenti sostituzioni: viene visualizzato un avviso quando l'utente prova a spostare i dati da un'app protetta a un'app non protetta. Se l'utente sceglie di ignorare l'avviso, l'azione verrà registrata.
",
- "protectionModeSilent": "
Invisibile all'utente: l'utente può spostare i dati all'esterno delle app protette. Queste azioni vengono registrate.
",
- "required": "Necessario",
- "revokeOnMdmHandoff": "Aggiunto in Windows 10 versione 1703. Questo criterio consente di controllare se revocare le chiavi WIP quando un dispositivo esegue l\\'aggiornamento da MAM a MDM. Se è impostato su \\\"Off\\\", le chiavi non verranno revocate e l\\'utente continuerà ad accedere ai file protetti dopo l\\'aggiornamento. Questa è l\\'opzione consigliata se il servizio MDM è configurato con lo stesso valore EnterpriseID WIP del servizio MAM.",
- "revokeOnUnenroll": "Le chiavi di crittografia verranno revocate quando viene annullata la registrazione di un dispositivo da questo criterio.",
- "rmsTemplateForEdp": "GUID di TemplateID da usare per la crittografia RMS. Il modello di Azure RMS consente all'amministratore IT di configurare i dettagli relativi agli utenti autorizzati ad accedere ai file con protezione RMS e alla durata dell'accesso.",
- "showWipIcon": "Questa opzione consente di informare l'utente quando si trova in un contesto aziendale, tramite la sovrimpressione di un'icona.",
- "useRmsForWip": "Specifica se consentire la crittografia di Azure RMS per WIP."
- },
- "requireAppPin": "
Selezionare Sì per disabilitare il PIN dell'app quando viene rilevato un blocco del dispositivo in un dispositivo registrato.
Nota: Intune non può rilevare la registrazione dei dispositivi con una soluzione EMM di terze parti in iOS/iPadOS.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "L'installazione dell'app può forzare il riavvio del dispositivo",
- "basedOnReturnCode": "Determinare il comportamento in base ai codici restituiti",
- "force": "Intune forzerà il riavvio obbligatorio del dispositivo",
- "suppress": "Nessuna azione specifica"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Tempo di installazione richiesto (minuti)",
- "maxRunTimeInMinutesToolTip": "Numero di minuti di attesa del programma di installazione da parte del sistema. Il valore predefinito è 60 minuti."
- },
- "RunAsAccountOptions": {
- "system": "Sistema",
- "user": "Utente"
- },
- "availableUninstall": "Consenti disinstallazione disponibile",
- "availableUninstallTooltip": "Selezionare 'Sì' per specificare l'opzione di disinstallazione per questa app per gli utenti dal Portale aziendale. Selezionare 'No' per impedire agli utenti di disinstallare l'app dal Portale aziendale.",
- "bladeTitle": "Programma",
- "deviceRestartBehavior": "Comportamento riavvio dispositivo",
- "deviceRestartBehaviorTooltip": "Selezionare il comportamento di riavvio del dispositivo dopo la corretta installazione dell'app. Selezionare 'Determina il comportamento in base ai codici restituiti' per riavviare il dispositivo in base alle impostazioni di configurazione dei codici restituiti. Selezionare 'Nessuna azione specifica' per eliminare i riavvii del dispositivo durante l'installazione dell'app per le app basate su MSI. Selezionare 'L'installazione dell'app può forzare il riavvio del dispositivo' per consentire il completamento dell'installazione dell'app senza eliminare i riavvii. Selezionare 'Intune forzerà il riavvio obbligatorio del dispositivo' per riavviare sempre il dispositivo dopo la corretta installazione dell'app.",
- "header": "Specificare i comandi per l'installazione e la disinstallazione di questa app:",
- "installCommand": "Comando di installazione",
- "installCommandMaxLengthErrorMessage": "Il comando di installazione non può superare la lunghezza massima consentita di 1024 caratteri.",
- "installCommandTooltip": "Riga di comando di installazione completa usata per installare questa app.",
- "runAs32Bit": "Esegui i comandi di installazione e disinstallazione in un processo a 32 bit nei client a 64 bit",
- "runAs32BitTooltip": "Selezionare 'Sì' per installare e disinstallare l'app in un processo a 32 bit nei client a 64 bit. Selezionare 'No' (impostazione predefinita) per installare e disinstallare l'app in un processo a 64 bit nei client a 64 bit. I client a 32 bit useranno sempre un processo a 32 bit.",
- "runAsAccount": "Comportamento di installazione",
- "runAsAccountTooltip": "Selezionare 'Sistema' per installare l'app per tutti gli utenti, se questa opzione è supportata. Selezionare 'Utente' per installare l'app per l'utente connesso al dispositivo. Per le app MSI con doppio scopo, le modifiche impediranno il completamento di aggiornamenti e disinstallazioni fino al ripristino del valore applicato al dispositivo al momento dell'installazione originale.",
- "selectorLabel": "Programma",
- "uninstallCommand": "Comando di disinstallazione",
- "uninstallCommandTooltip": "Riga di comando di disinstallazione completa usata per disinstallare questa app."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Crea nuovo",
- "createNewResourceAccountInfo": "
\r\nÈ possibile creare un nuovo account della risorsa durante la registrazione. L'account della risorsa verrà aggiunto immediatamente alla tabella Account della risorsa, ma sarà attivo solo dopo la registrazione del dispositivo e la verifica della sottoscrizione di Surface Hub. Altre informazioni sugli account della risorsa
\r\n ",
- "createNewResourceTitle": "Crea un nuovo account della risorsa",
- "deviceNameInvalid": "Il formato del nome dispositivo non è valido",
- "deviceNameRequired": "Il nome del dispositivo è obbligatorio",
- "editResourceAccountLabel": "Modifica",
- "selectExistingCommandMenu": "Seleziona esistente"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "I nomi possono contenere al massimo 15 caratteri e possono includere lettere (a-z, A-Z), numeri (0-9) e trattini. I nomi non devono contenere solo numeri. I nomi non possono includere uno spazio vuoto."
- },
- "Header": {
- "addressableUserName": "Nome descrittivo dell'utente",
- "azureADDevice": "Dispositivo Microsoft Entra associato",
- "batch": "Tag di gruppo",
- "dateAssigned": "Data di assegnazione",
- "deviceAccountPwd": "Password dell'account del dispositivo",
- "deviceAccountUpn": "Account del dispositivo",
- "deviceDisplayName": "Nome del dispositivo",
- "deviceFriendlyName": "Soprannome del dispositivo",
- "deviceName": "Nome del dispositivo",
- "deviceUseType": "Tipo di uso del dispositivo",
- "enrollmentState": "Stato della registrazione",
- "intuneDevice": "Dispositivo di Intune associato",
- "lastContacted": "Ultimo contatto",
- "make": "Produttore",
- "model": "Modello",
- "profile": "Profilo assegnato",
- "profileStatus": "Stato del profilo",
- "purchaseOrderId": "Ordine d'acquisto",
- "resourceAccount": "Account della risorsa",
- "serialNumber": "Numero di serie",
- "userPrincipalName": "Utente"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Il nome descrittivo è obbligatorio",
- "pwdRequired": "La password è obbligatoria",
- "pwdValidFormat": "Impossibile aggiornare la password. Il valore specificato per la nuova password non soddisfa i requisiti di lunghezza o complessità del dominio.",
- "upnRequired": "L'account del dispositivo è obbligatorio",
- "upnValidFormat": "I valori possono contenere lettere (a-z, A-Z), numeri (0-9) e trattini. I valori non possono includere uno spazio vuoto."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Riunione e presentazione",
- "teamCollaboration": "Collaborazione tra team"
- },
- "Devices": {
- "featureDescription": "Windows Autopilot consente di personalizzare la Configurazione guidata per gli utenti.",
- "importErrorStatus": "Alcuni dispositivi non sono stati importati. Per altre informazioni, fare clic qui.",
- "importPendingStatus": "L'importazione è in corso. Tempo trascorso: {0} min. Questo processo può richiedere fino a {1} min."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Aggiunto a Microsoft Entra ibrido",
- "activeDirectoryADLabel": "Aggiunta a Microsoft Entra ibrido con Autopilot",
- "azureAD": "Aggiunto a Microsoft Entra",
- "unknownType": "Tipo sconosciuto"
- },
- "Filter": {
- "enrollmentState": "Stato",
- "profile": "Stato del profilo"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "Il nome descrittivo non può essere vuoto."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Creare un modello di denominazione per aggiungere nomi ai dispositivi durante la registrazione.",
- "label": "Applica il modello di nome di dispositivo"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "Per i tipi di profili di distribuzione Autopilot aggiunti a Microsoft Entra ibrido i nomi dei dispositivi vengono definiti in base alle impostazioni specificate nella configurazione dell'aggiunta al dominio."
- },
- "ComputerNameTemplate": {
- "emptyValue": "Società-%RAND:4%",
- "label": "Immettere un nome",
- "noDisallowedChars": "Il nome deve contenere solo caratteri alfanumerici, trattini, %SERIAL% o %RAND:x%",
- "serialLength": "Non è possibile usare più di 7 caratteri con %SERIAL%",
- "validateLessThan15Chars": "Il nome non può contenere più di 15 caratteri",
- "validateNoSpaces": "I nomi computer non possono contenere spazi",
- "validateNotAllNumbers": "Il nome deve contenere anche lettere e/o trattini",
- "validateNotEmpty": "Il nome non può essere vuoto",
- "validateOnlyOneMacro": "Il nome deve contenere solo una delle macro %SERIAL% oppure %RAND:x%"
+ "ScopeTypes": {
+ "allDevices": "Tutti i dispositivi",
+ "allUsers": "Tutti gli utenti",
+ "allUsersAndDevices": "Tutti gli utenti e tutti i dispositivi",
+ "selectedGroups": "Gruppi selezionati"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Descrizione",
+ "placeholder": "Immettere una descrizione"
+ },
+ "NameTextBox": {
+ "label": "Nome",
+ "placeholder": "Immettere un nome"
+ },
+ "PublisherTextBox": {
+ "label": "Server di pubblicazione",
+ "placeholder": "Immettere un autore"
+ },
+ "VersionTextBox": {
+ "label": "Versione"
+ },
+ "headerDescription": "Consente di creare un nuovo pacchetto di script personalizzato dagli script di rilevamento e correzione scritti dall'utente."
},
- "ConfigureComputerNameTemplate": {
- "description": "Creare un nome univoco per i dispositivi. I nomi devono contenere al massimo 15 caratteri e possono contenere lettere (a-z, A-Z), numeri (0-9) e trattini. I nomi non devono contenere solo numeri. I nomi non possono includere uno spazio vuoto. Usare la macro %SERIAL% per aggiungere un numero di serie specifico per l'hardware. In alternativa, usare la macro %RAND:x% per aggiungere una stringa casuale di numeri, dove x equivale al numero di cifre da aggiungere."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Consentire di premere 5 volte il tasto Windows per eseguire OOBE senza autenticazione utente per registrare il dispositivo ed effettuare il provisioning di tutte le app e di tutte le impostazioni relative al contesto di sistema. Le app e le impostazioni relative al contesto utente verranno recapitate all'accesso dell'utente.",
- "label": "Consenti distribuzione di cui è stato eseguito il pre-provisioning"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Il flusso di aggiunta a Microsoft Entra ID ibrido di Autopilot continuerà anche se non stabilisce alcuna connettività con il controller di dominio durante la configurazione guidata.",
- "label": "Ignorare il controllo della connettività di AD"
- },
- "accountType": "Tipo di account utente",
- "accountTypeInfo": "Specificare se gli utenti sono amministratori o utenti standard nel dispositivo. Si noti che questa impostazione non è applicabile ad account di tipo Amministratore globale o Amministratore dell'azienda. Questi account non possono essere utenti standard perché possono accedere a tutte le funzionalità amministrative di Microsoft Entra ID.",
- "configOOBEInfo": "
\r\nConfigurare la Configurazione guidata per i dispositivi di Autopilot\r\n
",
- "configureDevice": "Modalità di distribuzione",
- "configureDeviceHintForSurfaceHub2": "Autopilot supporta solo la modalità di distribuzione automatica per Surface Hub 2. Questa modalità non associa l'utente al dispositivo registrato, quindi non richiede credenziali utente.",
- "configureDeviceHintForWindowsPC": "
\r\n La modalità di distribuzione consente di determinare se un utente deve immettere le credenziali per il provisioning del dispositivo.\r\n
\r\n
\r\n
\r\n Definita dall'utente: i dispositivi vengono associati all'utente che registra il dispositivo e le credenziali utente sono necessarie per il provisioning del dispositivo\r\n
\r\n
\r\n Distribuzione automatica (anteprima): i dispositivi non vengono associati all'utente che registra il dispositivo e le credenziali utente non sono necessarie per il provisioning del dispositivo\r\n
\r\n
",
- "createSurfaceHub2Info": "Configurare le impostazioni di registrazione di Autopilot per i dispositivi Surface Hub 2. Per impostazione predefinita, Autopilot consente di evitare l'autenticazione utente durante la Configurazione guidata. Altre informazioni su Windows Autopilot per Surface Hub 2.",
- "createWindowsPCInfo": "\r\n
\r\nLe opzioni seguenti vengono abilitate automaticamente per i dispositivi di Autopilot in modalità di distribuzione automatica:\r\n
\r\n
\r\n
\r\n Ignora la selezione per l'utilizzo aziendale o personale\r\n
\r\n
\r\n Ignora la registrazione OEM e la configurazione di OneDrive\r\n
\r\n
\r\n Ignora l'autenticazione utente nella Configurazione guidata\r\n
\r\n
",
- "endUserDevice": "Definita dall'utente",
- "hideEscapeLink": "Nascondi le opzioni di cambio di account",
- "hideEscapeLinkInfo": "Le opzioni per cambiare account e iniziare con un account diverso vengono visualizzate, rispettivamente, nella pagina di accesso dell'azienda e nella pagina dell'errore di dominio. Per nascondere queste opzioni, è necessario configurare le informazioni personalizzate distintive dell'azienda in Microsoft Entra ID (richiede Windows 10, 1809 o versioni successive o Windows 11).",
- "info": "Le impostazioni del profilo di AutoPilot definiscono la Configurazione guidata visualizzata agli utenti al primo avvio di Windows. ",
- "language": "Lingua (area geografica)",
- "languageInfo": "Specificare la lingua e l'area geografica che verranno usate.",
- "licenseAgreement": "Condizioni di licenza software Microsoft",
- "licenseAgreementInfo": "Specificare se visualizzare le condizioni di licenza agli utenti.",
- "plugAndForgetDevice": "Distribuzione automatica",
- "privacySettingWarning": "Il valore predefinito per la raccolta di dati di diagnostica è stato modificato per i dispositivi che eseguono Windows 10, versione 1903 e successive o Windows 11. ",
- "privacySettings": "Impostazioni di privacy",
- "privacySettingsInfo": "Specificare se visualizzare le impostazioni di privacy agli utenti.",
- "showCortanaConfigurationPage": "Configurazione di Cortana",
- "showCortanaConfigurationPageInfo": "Se si sceglie Mostra, verrà abilitata l'introduzione della configurazione di Cortana all'avvio.",
- "skipEULAWarning": "Informazioni importanti su come nascondere le condizioni di licenza",
- "skipKeyboardSelection": "Configura automaticamente la tastiera",
- "skipKeyboardSelectionInfo": "Se questa opzione è true, la pagina di selezione della tastiera viene ignorata se è impostata la lingua.",
- "subtitle": "Profili di AutoPilot",
- "title": "Configurazione guidata",
- "useOSDefaultLanguage": "Impostazione predefinita del sistema operativo",
- "userSelect": "Selezione utente"
- },
- "Sync": {
- "lastRequestedLabel": "Ultima richiesta di sincronizzazione",
- "lastSuccessfulLabel": "Ultima sincronizzazione riuscita",
- "syncInProgress": "È in corso la sincronizzazione. Ricontrollare tra poco.",
- "syncInitiated": "La sincronizzazione delle impostazioni di AutoPilot è stata avviata.",
- "syncSettingsTitle": "Sincronizza le impostazioni di AutoPilot"
- },
- "Title": {
- "devices": "Dispositivi di Windows AutoPilot"
- },
- "Tooltips": {
- "addressableUserName": "Nome del messaggio di saluto visualizzato durante la configurazione del dispositivo.",
- "azureADDevice": "Passare ai dettagli del dispositivo per il dispositivo associato. N/D indica che non sono presenti dispositivi associati.",
- "batch": "Attributo di stringa che può essere usato per identificare un gruppo di dispositivi. Il campo Tag di gruppo di Intune è associato all'attributo OrderID sui dispositivi Microsoft Entra.",
- "dateAssigned": "Timestamp relativo all'ora di assegnazione del profilo al dispositivo.",
- "deviceAccountPwd": "Password dell'account del dispositivo per i dispositivi Surface Hub. Se immesso, compilare anche l'account del dispositivo e il nome descrittivo.",
- "deviceAccountUpn": "Indirizzo di posta elettronica dell'account del dispositivo per i dispositivi Surface Hub. Se immesso, compilare anche la password dell'account del dispositivo e il nome descrittivo.",
- "deviceDisplayName": "Configura un nome univoco per il dispositivo. Il nome verrà ignorato nelle distribuzioni aggiunte a Microsoft Entra ID ibrido. Il nome del dispositivo deriva comunque dal profilo di aggiunta al dominio per i dispositivi Microsoft Entra ID ibrido.",
- "deviceFriendlyName": "Nome descrittivo del dispositivo per i dispositivi Surface Hub. Se immesso, compilare anche l'account del dispositivo e la password dell'account del dispositivo.",
- "deviceName": "Nome visualizzato quando un utente ha provato a individuare il dispositivo e a stabilire una connessione.",
- "deviceUseType": " Il dispositivo verrà configurato in base alle opzioni selezionate. È comunque possibile modificarle in seguito in Impostazioni.\r\n
\r\n
Windows Hello non è attivato per le riunioni e le presentazioni e i dati vengono rimossi dopo ogni sessione.\r\n
\r\n
Windows Hello è attivato per la collaborazione tra team e i profili vengono salvati per un accesso più rapido
\r\n
",
- "enrollmentState": "Consente di specificare se il dispositivo è stato registrato.",
- "intuneDevice": "Passare ai dettagli del dispositivo per il dispositivo associato. N/D indica che non sono presenti dispositivi associati.",
- "lastContacted": "Timestamp relativo all'ora in cui il dispositivo è stato contattato per l'ultima volta.",
- "make": "Produttore del dispositivo selezionato.",
- "model": "Modello del dispositivo selezionato",
- "profile": "Nome del profilo assegnato al dispositivo.",
- "profileStatus": "Consente di specificare se un profilo è assegnato al dispositivo.",
- "purchaseOrderId": "ID dell'ordine d'acquisto",
- "resourceAccount": "Identità del dispositivo o nome dell'entità utente.",
- "serialNumber": "Numero di serie del dispositivo selezionato.",
- "userPrincipalName": "Utente per precompilare l'autenticazione durante la configurazione del dispositivo."
- },
- "allDevices": "Tutti i dispositivi",
- "allDevicesAlreadyAssignedError": "Un profilo di Autopilot è già assegnato a Tutti i dispositivi.",
- "assignFailedDescription": "Non è stato possibile aggiornare le assegnazioni per {0}.",
- "assignFailedTitle": "Non è stato possibile aggiornare le assegnazioni dei profili di Autopilot.",
- "assignSuccessDescription": "Le assegnazioni per {0} sono state aggiornate.",
- "assignSuccessTitle": "Le assegnazioni dei profili di Autopilot sono state aggiornate.",
- "assignSufaceHub2ProfileNextStep": "Passaggi successivi per la distribuzione",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Assegnare questo profilo ad almeno un gruppo di dispositivi",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Assegnare un account della risorsa a ogni dispositivo Surface Hub in cui si distribuisce il profilo",
- "assignedDevicesCount": "Dispositivi assegnati",
- "assignedDevicesResourceAccountDescription": "
Per distribuire questo profilo in un dispositivo, è necessario assegnare al dispositivo un account della risorsa. Selezionare un dispositivo alla volta per assegnare un account della risorsa esistente o crearne uno nuovo. Altre informazioni sugli account della risorsa
",
- "assignedDevicesResourceAccountStatusBarMessage": "Questa tabella elenca solo i dispositivi Surface Hub 2 a cui è stato assegnato il profilo.",
- "assigningDescription": "Aggiornamento di assegnazioni per {0}.",
- "assigningTitle": "Aggiornamento di assegnazioni dei profili di Autopilot.",
- "autoremediationContext": "È stata rilevata una modifica hardware in questo dispositivo. Stiamo tentando di registrare automaticamente il nuovo hardware. Non è necessario eseguire alcuna operazione in questo momento; lo stato verrà aggiornato al successivo controllo con il risultato. Ulteriori informazioni sulla reimpostazione del profilo.",
- "autoremediationTitle": "Il dispositivo {0} presenta una correzione in sospeso",
- "cannotDeleteMessage": "Questo profilo è assegnato ai gruppi. È necessario annullare l'assegnazione di tutti i gruppi da questo profilo prima di poterlo eliminare.",
- "cannotDeleteTitle": "Non è possibile eliminare {0}",
- "createdDateTime": "Ora di creazione",
- "deleteMessage": "Se si elimina questo profilo di AutoPilot, eventuali dispositivi assegnati al profilo avranno stato Non assegnato.",
- "deleteMessageWithPolicySet": "{0} è incluso in uno o più set di criteri. Se si elimina {0}, non sarà più possibile assegnarlo tramite questi set di criteri.",
- "deleteTitle": "Eliminare questo profilo?",
- "description": "Descrizione",
- "deviceType": "Tipo di dispositivo",
- "deviceUse": "Uso del dispositivo",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot supporta solo dispositivi aggiunti a Microsoft Entra per Surface Hub 2. Specificare il modo in cui i dispositivi vengono aggiunti ad Active Directory (AD) nell'organizzazione.\r\n
\r\n
\r\n
\r\n Aggiunto a Microsoft Entra: solo cloud senza istanza locale di Windows Server Active Directory.\r\n
\r\n Specificare il modo in cui i dispositivi vengono aggiunti ad Active Directory (AD) nell'organizzazione:\r\n
\r\n
\r\n
\r\n Aggiunta a Microsoft Entra: solo cloud senza istanza locale di Windows Server Active Directory\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Si è verificato un errore durante il recupero del numero di dispositivi assegnati.",
- "getAssignmentsError": "Si è verificato un errore durante il recupero delle assegnazioni dei profili di Autopilot.",
- "harvestDeviceId": "Converti tutti i dispositivi interessati in Autopilot",
- "harvestDeviceIdDescription": "Per impostazione predefinita, questo profilo può essere applicato solo ai dispositivi di Autopilot sincronizzati dal servizio Autopilot.",
- "harvestDeviceIdInfo": "\r\n Selezionare Sì per registrare tutti i dispositivi interessati in Autopilot, se non sono già stati registrati. Alla successiva Configurazione guidata di Windows, i dispositivi passeranno allo scenario di Autopilot assegnato.\r\n \r\n Si noti che determinati scenari di Autopilot richiedono build minime specifiche di Windows. Assicurarsi che il dispositivo abbia la build minima necessaria per completare lo scenario.\r\n \r\n La rimozione del profilo non rimuoverà i dispositivi interessati da Autopilot. Per rimuovere un dispositivo da Autopilot, usare la visualizzazione Dispositivi di Windows Autopilot.\r\n ",
- "harvestDeviceIdWarning": "Dopo la conversione, è possibile ripristinare le impostazioni precedenti dei dispositivi di AutoPilot solo eliminandoli dall'elenco di dispositivi di AutoPilot.",
- "holoLensCommandMenu": "HoloLens",
- "info": "I profili di Windows AutoPilot Deployment consentono di personalizzare la Configurazione guidata per i dispositivi.",
- "invalidProfileNameMessage": "Il carattere \"{0}\" non è consentito",
- "joinTypeLabel": "Aggiungi a Microsoft Entra ID come",
- "lastModifiedDateTime": "Ultima modifica:",
- "manualRemediationContext": "È stata rilevata una modifica hardware in questo dispositivo. Non riceverà automaticamente un profilo di Autopilot quando viene reimpostato, a meno che non registri di nuovo il dispositivo. Altre informazioni sulla reimpostazione del profilo.",
- "manualRemediationTitle": "Il dispositivo {0} richiede la tua attenzione",
- "name": "Nome",
- "noAutopilotProfile": "Nessun profilo di AutoPilot",
- "notEnoughPermissionAssignedError": "Le autorizzazioni non sono sufficienti per assegnare questo profilo a uno o più gruppi selezionati. Contattare l'amministratore.",
- "profile": "profilo",
- "resourceAccountStatusBarMessage": "È necessario un account della risorsa per ogni dispositivo Surface Hub 2 in cui viene distribuito questo profilo. Fare clic per altre informazioni.",
- "selectServices": "Selezionare il servizio directory a cui verranno aggiunti i dispositivi",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Modalità di distribuzione",
- "windowsPCCommandMenu": "PC Windows",
- "directoryServiceLabel": "Aggiungi a Microsoft Entra ID come"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Gruppi di amministratori",
- "RoleAssignmentAdminDesc": "Gli utenti del gruppo di amministratori sono gli amministratori assegnati a questo ruolo",
- "rolesMenuTitle": "Ruoli di Endpoint Manager",
- "RoleAssignmentScopeDesc": "Gli amministratori in questa assegnazione di ruolo possono specificare criteri, applicazioni e attività remote",
- "RoleAssignmentScope": "Gruppi di ambiti"
- },
+ "ScopeTags": {
+ "headerDescription": "Selezionare uno o più gruppi a cui assegnare il pacchetto di script."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Script di rilevamento",
+ "placeholder": "Inserire il testo dello script",
+ "requiredValidationMessage": "Immettere lo script di rilevamento"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Imponi il controllo della firma degli script"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Esegui lo script con le credenziali dell'utente connesso"
+ },
+ "RemediationScript": {
+ "infoBox": "Questo script verrà eseguito in modalità di solo rilevamento perché non è presente alcuno script di correzione."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Script di monitoraggio e aggiornamento",
+ "placeholder": "Inserire il testo dello script"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Esegui lo script in PowerShell a 64 bit"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Lo script non è valido. Uno o più caratteri usati nello script non sono validi."
+ },
+ "headerDescription": "Consente di creare un pacchetto di script personalizzato dagli script scritti dall'utente. Per impostazione predefinita, gli script verranno eseguiti ogni giorno nei dispositivi assegnati.",
+ "infoBox": "Lo script è di sola lettura. È possibile che alcune impostazioni per lo script siano disabilitate."
+ },
+ "title": "Crea uno script personalizzato",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Intervallo",
+ "time": "Data e ora"
+ },
+ "Interval": {
+ "day": "Ripetizione ogni giorno",
+ "days": "Ripetizione ogni {0} giorni",
+ "hour": "Ripetizione ogni ora",
+ "hours": "Si ripete ogni {0} ore",
+ "month": "Ripetizione ogni mese",
+ "months": "Ripetizione ogni {0} mesi",
+ "week": "Ripetizione ogni settimana",
+ "weeks": "Ripetizione ogni {0} settimane"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) in data {1}",
+ "withDate": "{0} in data {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Modifica - {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Interrompi solo le app di blocco selezionate nella fase tecnico",
- "apps": "app",
- "appsListName": "Elenco applicazioni",
- "blockingApps": "Blocco delle app",
- "managedApps": "App gestite",
- "noApps": "Nessuna applicazione",
- "noAppsError": "Si è verificato un errore durante il recupero delle applicazioni",
- "selectApps": "Selezionare le app",
- "selectedAppsCount": "{0} app selezionate (al massimo 100)",
- "useSelectedAppsAll": "Tutto",
- "useSelectedAppsSelected": "Selezionato",
- "useSelectedAppsToggleLabel": "Blocca l'uso del dispositivo fino all'installazione delle app necessarie in caso di assegnazione a un utente/dispositivo"
- },
- "Header": {
- "application": "Applicazione",
- "publisher": "Editore",
- "version": "Versione"
- },
- "SearchBox": {
- "ariaLabel": "Cerca app",
- "placeHolder": "Cerca per nome o autore"
- },
- "allowToUseToggle": "Consenti agli utenti di usare il dispositivo se si verifica un errore di installazione",
- "blockToggle": "Impedisci l'uso del dispositivo fino al completamento dell'installazione di tutte le app e di tutti i profili",
- "blockToolTip": "Se, ad esempio, si aggiunge Microsoft Word a questo elenco, utenti e dispositivi di destinazione non potranno uscire dalla pagina di stato della registrazione finché l'installazione di Word non viene completata.",
- "collectLogToggle": "Attiva la raccolta di log e la pagina di diagnostica per gli utenti finali",
- "create": "Creazione profilo",
- "customMessageTextBox": "Messaggio di errore",
- "customMessageToggle": "Mostrare un messaggio personalizzato in caso di raggiungimento del limite di tempo o se si verifica un errore",
- "enableForAutopilotOnlyToggle": "Mostra la pagina solo ai dispositivi sottoposti a provisioning dalla Configurazione guidata",
- "installQualityUpdatesToggle": "Installare gli aggiornamenti di qualità di Windows (potrebbe riavviare il dispositivo) (anteprima)",
- "progressToggle": "Mostra lo stato della configurazione di app e profili",
- "resetToggle": "Consenti agli utenti di reimpostare il dispositivo se si verifica un errore di installazione",
- "timeout": "Mostra un errore se l'installazione richiede più tempo rispetto al numero di minuti specificato"
- },
+ "OfficeUpdateChannel": {
+ "current": "Canale corrente",
+ "deferred": "Canale aziendale semestrale",
+ "firstReleaseCurrent": "Canale corrente (anteprima)",
+ "firstReleaseDeferred": "Canale Enterprise semestrale (Anteprima)",
+ "monthlyEnterprise": "Canale aziendale mensile",
+ "placeHolder": "Selezionare una voce"
+ },
"TableHeaders": {
"activity": "Attività",
"activityName": "Nome attività",
@@ -1293,30 +417,175 @@
"excludedGroups": "Gruppi esclusi",
"licenseType": "Tipo di licenza"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Configurare i requisiti per PIN e credenziali che gli utenti devono soddisfare per accedere alle app in un contesto aziendale."
- },
- "DataProtection": {
- "infoText": "Questo gruppo include i controlli di prevenzione della perdita dei dati, ad esempio restrizioni per operazioni di tipo taglia, copia, incolla e salva con nome. Queste impostazioni determinano il modo in cui gli utenti interagiscono con i dati nelle app."
- },
- "DeviceTypes": {
- "selectOne": "Selezionare almeno un tipo di dispositivo."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Specifica come destinatari le app in tutti i tipi di dispositivo"
- },
- "infoText": "Scegliere come si vuole applicare questo criterio alle app in dispositivi diversi. Quindi, aggiungere almeno un'app.",
- "selectOne": "Selezionare almeno un'app per creare un criterio."
- }
- },
- "AssignmentAction": {
- "exclude": "Escluso",
- "include": "Inclusi",
- "includeAllDevicesVirtualGroup": "Inclusi",
- "includeAllUsersVirtualGroup": "Inclusi"
- },
+ "Inputs": {
+ "accountDomain": "Dominio dell'account",
+ "accountDomainHint": "Ad esempio, contosodomain",
+ "accountDomainInfoBalloon": "Specificare il dominio dell'account dell'utente.",
+ "accountTypeInfoBalloon": "Specificare il tipo di account da configurare in base al modello di autenticazione",
+ "allowContactSetting": "Consenti all'utente di modificare l'impostazione relativa al contatto",
+ "allowContactSyncInfoBalloon": "Specificare se l'utente è autorizzato a modificare l'impostazione di sincronizzazione relativa al contatto",
+ "allowUserChange": "Consenti all'utente di cambiare impostazione",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Immettere un nome di pacchetto simile a com.microsoft.word",
+ "androidUrlValidation": "Immettere un URL valido simile a https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "Contesto di installazione dell'app",
+ "appUrlLabel": "URL di App Store",
+ "appleUrlValidation": "Immettere un URL valido simile a https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Tipo di dispositivo applicabile",
+ "assignmentActionLabel": "Modalità",
+ "authenticationMethodInfoBalloon": "Specificare il metodo di autenticazione per l'utente",
+ "authenticationMetod": "Metodo di autenticazione",
+ "authenticationType": "Tipo di autenticazione",
+ "authenticationTypeInfoBalloon": "Specificare il tipo di autenticazione per l'utente",
+ "availableLicenseCount": "Licenze disponibili",
+ "basicAuth": "Autenticazione di base",
+ "biometricsInfoBalloon": "Le funzionalità di biometria, ad esempio TouchID o FaceID, possono essere obbligatorie per l'accesso degli utenti al proprio dispositivo. Quando sono obbligatorie, le funzionalità di biometria vengono usate in aggiunta al metodo di autenticazione selezionato in questo profilo. Questa impostazione non deve essere abilitata quando sono distribuiti i Criteri di protezione delle app di Intune, perché i criteri di protezione delle app includono requisiti di accesso prima dell'accesso ai dati gestiti. L'abilitazione di entrambe le opzioni provocherà la visualizzazione di più richieste di accesso per l'accesso a Outlook Mobile. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off. ",
+ "bookNameLabel": "Nome del libro",
+ "bundleDescriptionHint": "Immettere una descrizione che illustra le app incluse.",
+ "calendar": "Calendario",
+ "categoryLabel": "Categoria",
+ "categoryNameLabel": "Nome predefinito",
+ "certProfileType": "Tipo di profilo di certificato",
+ "certificate": "Certificato",
+ "certificates": "Certificati",
+ "commandLineLabel": "Argomenti della riga di comando",
+ "commandLineSizeHint": "La lunghezza massima del testo degli argomenti della riga di comando è di 1024 caratteri",
+ "configurationSettingsFormatLabel": "Formato delle impostazioni di configurazione",
+ "configurationSettingsLabel": "Formato delle impostazioni",
+ "contactSync": "Salva i contatti",
+ "contactSyncInfoBalloon": "Il salvataggio dei contatti nella rubrica nativa del dispositivo mobile consente il collegamento di nuove chiamate e SMS con i contatti di Outlook esistenti dell'utente. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
+ "contacts": "Contatti",
+ "createdDateTime": "Ora di creazione",
+ "defaultCategoryHint": "Non è possibile modificare le categorie predefinite",
+ "deploySMimeCertsFromIntune": "Distribuisci certificati S/MIME da Intune",
+ "descriptionGenericLabel": "Descrizione",
+ "descriptionHint": "Immettere una descrizione...",
+ "descriptionLabel": "Descrizione",
+ "descriptionSizeHint": "La lunghezza della descrizione non deve superare i 10.000 caratteri",
+ "developerLabel": "Developer",
+ "developerSizeHint": "La lunghezza massima del nome dello sviluppatore è di 256 caratteri.",
+ "disable": "Disabilita",
+ "disabled": "Disabilitata",
+ "displayNameLabel": "Nome",
+ "displayVersionHint": "Immettere la versione dell'app",
+ "displayVersionLabel": "Versione dell'app",
+ "displayVersionLengthCheck": "La lunghezza della versione visualizzata deve essere un massimo di 130 caratteri",
+ "eBookCategoryNameLabel": "Nome predefinito",
+ "emailAccount": "Nome dell'account di posta elettronica",
+ "emailAccountHint": "Ad esempio posta elettronica aziendale",
+ "emailAccountInfoBalloon": "Specificare il nome visualizzato per l'account di posta elettronica che verrà mostrato agli utenti nei rispettivi dispositivi",
+ "emailAddressAttribute": "Attributo indirizzo e-mail dall'ID Microsoft Entra",
+ "emailAddressInfoBalloon": "Specificare l'indirizzo di posta elettronica da usare per inviare e ricevere messaggi",
+ "emailServer": "Server di posta elettronica",
+ "emailServerHint": "Ad esempio, mail.contoso.com",
+ "emailServerInfoBalloon": "Specificare il nome host del server Exchange",
+ "enable": "Abilita",
+ "enableSMime": "Abilita S/MIME",
+ "enabled": "Attivato",
+ "encryptAllEmails": "Crittografa tutti i messaggi di posta elettronica",
+ "encryptionCertificates": "Certificati di crittografia",
+ "endUserNotifications": "Notifiche per l'utente finale",
+ "enrollmentTypeLabel": "Tipo di registrazione del dispositivo",
+ "externalRecipients": "Avviso messaggio per destinatari esterni",
+ "externalRecipientsInfoBalloon": "L'Avviso messaggio per destinatari esterni viene visualizzato se il mittente aggiunge un destinatario esterno o se aggiunge un gruppo di distribuzione che include destinatari esterni. Questo avviso messaggio segnala ai mittenti se il messaggio che stanno scrivendo uscirà dall'organizzazione, aiutandoli a prendere le decisioni appropriate a livello di formulazione, tono e contenuto. Disponibile solo per account Exchange Online e account locali che sfruttano i vantaggi dell'autenticazione moderna ibrida. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è On.",
+ "focusedInbox": "Posta in arrivo evidenziata",
+ "focusedInboxInfoBalloon": "Posta in arrivo evidenziata separa la cartella della posta in arrivo in due schede: Evidenziata e Altra. I messaggi di posta elettronica più importanti si trovano nella scheda Evidenziata, mentre gli altri messaggi rimangono facilmente accessibili, ma non visualizzati, nella scheda Altra. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off. ",
+ "fullScreenEnabledLabel": "Schermo intero",
+ "gmailNineAmountOfEmail": "Numero di messaggi di posta elettronica da sincronizzare",
+ "gmailNineAuthenticationMethodInfoBalloon": "Selezionare la modalità di autenticazione degli utenti al server di posta elettronica. Usare i certificati per fornire agli utenti finali l'esperienza più facile e sicura. L'autenticazione basata su certificati non è ancora disponibile perché i profili dei certificati SCEP e PKCS per i dispositivi dei proprietari di dispositivi non sono ancora disponibili.",
+ "gmailNineCertificateUPNInfoBalloon": "Il certificato deve includere un nome dell'entità utente come nome alternativo del soggetto.",
+ "gmailNineEmailAddressInfoBalloon": "L'attributo che Intune ottiene dall'ID Microsoft Entra per generare dinamicamente l'indirizzo e-mail che verrà usato dal profilo, ad esempio MyName@contoso.com (UPN). Ulteriori informazioni sugli attributi di Microsoft Entra per i profili di posta elettronica.",
+ "gmailNineEmailServerInfoBalloon": "Posizione di Exchange (URL) del server di posta elettronica a cui l'app specificata si connette per ottenere i messaggi.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Consente di controllare la quantità di posta elettronica che verrà sincronizzata dal client.",
+ "gmailNineSSLInfoBalloon": "Abilitare SSL per proteggere tutte le comunicazioni con il server di posta elettronica.",
+ "gmailNineUsernameInfoBalloon": "L'attributo che Intune ottiene dall'ID Microsoft Entra per generare dinamicamente il nome utente che verrà usato dal profilo, ad esempio MyName@contoso.com (UPN) o MyName (nome utente). Ulteriori informazioni sugli attributi di Microsoft Entra per i profili di posta elettronica.",
+ "ignoreManifestScope": "Ignora ambito manifesto",
+ "ignoreVersionDetection": "Ignora la versione dell'app",
+ "informationUrlLabel": "URL di informazioni",
+ "informationUrlSizeHint": "La lunghezza massima dell’URL delle informazioni è di 1024 caratteri.",
+ "installAsManaged": "Installa come gestita",
+ "installationSourceLabel": "Tipo di app",
+ "installerTypeInfoBalloon": "Tipo di programma di installazione del pacchetto dell'applicazione.",
+ "installerTypeLabel": "Tipo di programma di installazione",
+ "isFeatured": "Mostra l'app come app in primo piano nel Portale aziendale",
+ "isMAMEnabledToggleLabel": "Sì",
+ "lastModifiedDateTime": "Ora dell'ultimo aggiornamento",
+ "ldapUrl": "URL LDAP",
+ "licensingType": "Supporta l'assegnazione di contesto di dispositivo",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Sistema operativo minimo",
+ "modernAuth": "Autenticazione moderna",
+ "nameHint": "Immettere un nome",
+ "nameLabel": "Nome",
+ "nameSizeHint": "La lunghezza massima del nome è di 512 caratteri.",
+ "notConfigured": "Non configurato",
+ "notesLabel": "Note",
+ "notesSizeHint": "La lunghezza massima del testo delle note è di 1024 caratteri.",
+ "notificationType": "Tipo di notifica",
+ "oneDay": "Un giorno",
+ "oneMonth": "Un mese",
+ "oneWeek": "Una settimana",
+ "outlookSMimeSettings": "Impostazioni di S/MIME per Outlook",
+ "ownerLabel": "Proprietario",
+ "ownerSizeHint": "La lunghezza massima del nome del proprietario è di 256 caratteri.",
+ "packageIdLabel": "Identificatore pacchetto",
+ "packageNameLabel": "Nome del pacchetto",
+ "pivCredentialNotConfigured": "Non è stato selezionato alcun emittente delle credenziali derivate per il tenant. Sarà necessario configurarne uno per potere applicare questo criterio ai dispositivi.",
+ "platformLabel": "Piattaforma",
+ "policyDescriptionLabel": "Descrizione",
+ "policyNameLabel": "Nome",
+ "preComposedIconEnabled": "Precomposti",
+ "primarySMTPAddress": "Indirizzo SMTP primario",
+ "privacyUrlLabel": "URL privacy",
+ "publisherHint": "Immettere il nome di un server di pubblicazione",
+ "publisherLabel": "Server di pubblicazione",
+ "publisherSizeHint": "La lunghezza del nome dell'entità di pubblicazione deve essere compresa tra 2 e 1024 caratteri (inclusi)",
+ "require": "Rendi obbligatorio",
+ "requireBiometrics": "Rendi obbligatori i dati biometrici per l'accesso all'app",
+ "sAMAccountName": "Nome account SAM",
+ "scopeTagsRequired": "È necessario almeno un tag di ambito",
+ "searchAppLabel": "Selezionare l'app",
+ "searchAppLinkText": "Cerca in App Store",
+ "searchWinGetPublicRepositoryLinkText": "Cerca nel repository della community Gestione pacchetti Windows",
+ "searchWinGetStoreRepositoryLinkText": "Cerca nell'app Microsoft Store (novità)",
+ "selectAAD": "Selezionare un attributo Microsoft Entra",
+ "selectAppFileLabel": "Seleziona file",
+ "selectAppFileLinkText": "Selezionare il file del pacchetto di app",
+ "selectAppFileToUpdateLabel": "Selezionare il file da aggiornare",
+ "selectAuthMethod": "Selezionare un metodo di autenticazione",
+ "selectAuthType": "Selezionare un tipo di autenticazione",
+ "selectCatalogAppLabel": "Selezionare l'app",
+ "selectCatalogAppLinkText": "Cercare nel Catalogo app aziendali",
+ "selectCertificate": "Selezionare un certificato",
+ "signAllEmails": "Firma tutti i messaggi di posta elettronica",
+ "signingCertificates": "Certificati di firma",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Descrizione della suite",
+ "suiteNameLabel": "Nome della suite",
+ "targetApplicationBundleIdentifier": "Identificatore del bundle dell'applicazione di destinazione",
+ "targetedPlatformsLabel": "Piattaforma interessata",
+ "tasks": "Attività",
+ "threeDays": "Tre giorni",
+ "totalLicenseCount": "Totale licenze",
+ "twoWeeks": "Due settimane",
+ "unifiedAssignmentsLabel": "Assegna a:",
+ "unlimited": "Senza limiti",
+ "urlHint": "Immettere un URL valido",
+ "useManagedBrowserHint": "Solo Android e iOS. Altre informazioni",
+ "useManagedBrowserLabel": "Richiedi un browser gestito per l'apertura del collegamento",
+ "userPrinicipalName": "Nome entità utente",
+ "username": "Nome utente",
+ "usernameAttribute": "Attributo nome utente dall’ID Microsoft Entra",
+ "usernameAttributreInfoBalloon": "Specificare il nome dell'entità utente per il profilo di posta elettronica che verrà usato per l'autenticazione dell'account",
+ "usernamePassword": "Nome utente e password",
+ "webAppUrlHint": "Immettere un URL valido che inizia con http:// o https://",
+ "webAppUrlLabel": "URL app",
+ "webAppUrlSizeHint": "La lunghezza massima dell’URL app è di 1024 caratteri.",
+ "windowsUrlValidation": "Immettere un URL valido simile a https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "Dati XML immessi",
+ "xmlFormatInvalid": "Il formato del criterio XML non è valido.",
+ "xmlTooLarge": "Le dimensioni dell'input devono essere inferiori a 1 MB."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Gli utenti interessati saranno limitati dalla pagina dell'autorità di co-gestione con priorità più elevata successiva assegnata o alla pagina dell'autorità di co-gestione predefinita, se non sono state assegnate altre pagine dell'autorità di co-gestione.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Autorità di co-gestione",
"settingDescription": "Le impostazioni di co-gestione determinano il proprietario dei carichi di lavoro."
},
- "AppType": {
- "androidEnterpriseSystemApp": "App del sistema Android Enterprise",
- "androidForWorkApp": "App di Google Play Store gestito",
- "androidLobApp": "App line-of-business Android",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "App Android predefinita",
- "builtInApp": "App predefinita",
- "builtInIos": "App iOS predefinita",
- "default": "",
- "iosIPadOSWebClip": "Clip Web iOS/iPadOS",
- "iosLobApp": "App line-of-business iOS",
- "iosStoreApp": "App Store iOS",
- "iosVppApp": "App Volume Purchase Program iOS",
- "lineOfBusinessApp": "App line-of-business",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "App line-of-business macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "App di Microsoft 365 (macOS)",
- "macOSPkgApp": "App macOS (PKG)",
- "macOSWebClip": "Clip Web macOS",
- "macOsVppApp": "App Volume Purchase Program macOS",
- "managedAndroidLobApp": "App line-of-business Android gestita",
- "managedAndroidStoreApp": "App di Android Store gestita",
- "managedGooglePlayApp": "App di Google Play Store gestito",
- "managedGooglePlayPrivateApp": "App privata di Google Play gestito",
- "managedGooglePlayWebApp": "Collegamento Web di Google Play gestito",
- "managedIosLobApp": "App line-of-business iOS gestita",
- "managedIosStoreApp": "App dello Store iOS gestita",
- "microsoftStoreForBusinessApp": "App di Microsoft Store per le aziende",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store per le aziende",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 e versioni successive)",
- "webApp": "Collegamento Web",
- "windowsAppXLobApp": "App line-of-business AppX per Windows",
- "windowsClassicApp": "App Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 e versioni successive)",
- "windowsMobileMsiLobApp": "App line-of-business di Windows MSI",
- "windowsPhone81AppXBundleLobApp": "App line-of-business AppX per Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "App line-of-business AppX per Windows Phone 8.1",
- "windowsPhone81StoreApp": "App dello Store per Windows Phone 8.1",
- "windowsPhoneXapLobApp": "App line-of-business XAP per Windows Phone",
- "windowsStoreApp": "App Microsoft Store (legacy)",
- "windowsUniversalAppXLobApp": "App line-of-business AppX universale per Windows",
- "windowsUniversalLobApp": "App line-of-business universale di Windows",
- "windowsWebApp": "Link Web Windows"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Consigliata",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrein",
+ "countryNameZA": "Sudafrica",
+ "countryNameJO": "Giordania",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Ceca, Repubblica",
+ "countryNameLT": "Lituania",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hong Kong - R.A.S.",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Arabia Saudita",
+ "countryNamePG": "Papua Nuova Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "India",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Romania",
+ "countryNameKZ": "Kazakistan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Georgia",
+ "countryNameTT": "Trinidad e Tobago",
+ "countryNameMP": "Isole Marianne settentrionali",
+ "countryNameMV": "Maldive",
+ "countryNameFI": "Finlandia",
+ "countryNameNO": "Norvegia",
+ "countryNameEE": "Estonia",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Uzbekistan",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tagikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "Francia",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italia",
+ "countryNameAZ": "Azerbaigian",
+ "countryNameKG": "Kirghizistan",
+ "countryNameWF": "Wallis e Futuna",
+ "countryNameTL": "Timor Est",
+ "countryNameFK": "Isole Falkland (Isole Malvine)",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "Sudan del Sud",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Siria",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "Saint Vincent e Grenadine",
+ "countryNameID": "Indonesia",
+ "countryNameRE": "Riunione",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "Macedonia del Nord",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Polinesia francese",
+ "countryNameKY": "Isole Cayman",
+ "countryNameIO": "Territorio britannico dell'Oceano Indiano",
+ "countryNameRU": "Russia",
+ "countryNameMA": "Marocco",
+ "countryNameAU": "Australia",
+ "countryNameBO": "Bolivia",
+ "countryNameVA": "Santa Sede (Stato della Città del Vaticano)",
+ "countryNameVG": "Isole Vergini Britanniche",
+ "countryNameFM": "Micronesia",
+ "countryNameAQ": "Antartide",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brasile",
+ "countryNameIS": "Islanda",
+ "countryNamePE": "Perù",
+ "countryNameBG": "Bulgaria",
+ "countryNamePR": "Portorico",
+ "countryNameGI": "Gibilterra",
+ "countryNameBS": "Bahamas",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "RAS di Macao",
+ "countryNameRW": "Ruanda",
+ "countryNameAS": "Samoa americane",
+ "countryNameBQ": "Bonaire, Sint Eustatius e Saba",
+ "countryNameMF": "Saint Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Nuova Caledonia",
+ "countryNameAC": "Isola Ascensione",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladesh",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Canada",
+ "countryNameSH": "Sant'Elena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolia",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Camerun",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Giappone",
+ "countryNameCY": "Cipro",
+ "countryNameCD": "Repubblica democratica del Congo",
+ "countryNameTN": "Tunisia",
+ "countryNameTR": "Turchia",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Svezia",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Cambogia",
+ "countryNamePL": "Polonia",
+ "countryNameDZ": "Algeria",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Egitto",
+ "countryNameGF": "Guyana francese",
+ "countryNameNZ": "Nuova Zelanda",
+ "countryNamePS": "Autorità Palestinese",
+ "countryNameIL": "Israele",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Grecia",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauritania",
+ "countryNameVI": "Isole Vergini Americane",
+ "countryNameGQ": "Guinea Equatoriale",
+ "countryNameMX": "Messico",
+ "countryNameDJ": "Gibuti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "Cina",
+ "countryNameMZ": "Mozambico",
+ "countryNameBV": "Isola Bouvet",
+ "countryNameNF": "Norfolk",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "Georgia del Sud e Sandwich Australi",
+ "countryNameRS": "Serbia",
+ "countryNameCC": "Isole Cocos (Keeling)",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Germania",
+ "countryNameCG": "Repubblica del Congo",
+ "countryNameKW": "Kuwait",
+ "countryNameMH": "Marshall",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Bielorussia",
+ "countryNameMY": "Malaysia",
+ "countryNameST": "São Tomé e Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Ciad",
+ "countryNameCX": "Isola Christmas",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bissau",
+ "countryNameUA": "Ucraina",
+ "countryNameCU": "Cuba",
+ "countryNameCO": "Colombia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Croazia",
+ "countryNameSC": "Seychelles",
+ "countryNameNL": "Paesi Bassi",
+ "countryNameUM": "Altre isole americane del Pacifico",
+ "countryNameIM": "Isola di Man",
+ "countryNameFJ": "Figi",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "Regno Unito",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovenia",
+ "countryNameAM": "Armenia",
+ "countryNameAR": "Argentina",
+ "countryNamePM": "Saint-Pierre e Miquelon",
+ "countryNameTF": "Terre Australi e Antartiche Francesi",
+ "countryNameDO": "Dominicana, Repubblica",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinica",
+ "countryNamePT": "Portogallo",
+ "countryNameCF": "Repubblica Centrafricana",
+ "countryNameBE": "Belgio",
+ "countryNameKM": "Comore",
+ "countryNameLY": "Libia",
+ "countryNameIE": "Irlanda",
+ "countryNameKP": "Corea del Nord",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slovacchia",
+ "countryNameTC": "Isole Turks e Caicos",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Yemen",
+ "countryNameBA": "Bosnia ed Erzegovina",
+ "countryNameGP": "Guadalupa",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Cile",
+ "countryNameIQ": "Iraq",
+ "countryNameSJ": "Svalbard e Isola Jan Mayen",
+ "countryNameAX": "Isole Åland",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Fær Øer",
+ "countryNameBL": "Saint-Barthélemy",
+ "countryNameLB": "Libano",
+ "countryNameJM": "Giamaica",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Spagna",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapore",
+ "countryNameAL": "Albania",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "eSwatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d'Ivoire (Costa d'Avorio)",
+ "countryNameTW": "Taiwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Isole Cook",
+ "countryNameTH": "Thailandia",
+ "countryNameHM": "Heard e McDonald",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "Stati Uniti",
+ "countryNameAT": "Austria",
+ "countryNameKR": "Repubblica di Corea",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Danimarca",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Etiopia",
+ "countryNameMG": "Madagascar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Lussemburgo",
+ "countryNameQA": "Qatar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Isole Salomone",
+ "countryNameAE": "Emirati Arabi Uniti",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua e Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Ungheria",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Svizzera",
+ "countryNamePN": "Isole Pitcairn",
+ "countryNameGL": "Groenlandia",
+ "countryNamePH": "Filippine",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts e Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Lettonia",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Autore",
+ "template": "Nome modello"
+ },
+ "Row": {
+ "ariaLabel": "riga {0} di {1} colonna {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Iniziare da zero e selezionare le proprietà da usare dalla libreria di impostazioni inventario disponibili"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Iniziare da zero e selezionare le impostazioni da usare dalla libreria di impostazioni disponibili",
+ "title": "Catalogo di impostazioni"
+ },
+ "Templates": {
+ "subtitle": "I modelli contengono gruppi di impostazioni, organizzati in base a funzionalità. Usare un modello quando non si vogliono creare manualmente i criteri o si vogliono configurare i dispositivi per accedere alle reti aziendali, ad esempio in caso di configurazione di WiFi o VPN.",
+ "title": "Modelli"
+ },
+ "noData": "Non sono stati trovati modelli dei criteri"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge impostazioni SmartScreen consigliate per l'app: Windows 10 nel modello di configurazione cloud. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Rilevamento di endpoint e risposta"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "Isolamento di app e browser",
+ "aSRApplicationControl": "Controllo applicazione",
+ "aSRAttackSurfaceReduction": "Regole per la riduzione della superficie di attacco",
+ "aSRDeviceControl": "Controllo del dispositivo",
+ "aSRExploitProtection": "Protezione dagli exploit",
+ "aSRWebProtection": "Protezione Web (Microsoft Edge Legacy)",
+ "aVExclusions": "Esclusioni di Antivirus Microsoft Defender",
+ "antivirus": "Antivirus Microsoft Defender",
+ "cloudPC": "Baseline di sicurezza di Windows 365",
+ "default": "Sicurezza degli endpoint",
+ "defenderTest": "Demo di Microsoft Defender per endpoint",
+ "diskEncryption": "BitLocker",
+ "eDR": "Rilevamento di endpoint e risposta",
+ "edgeSecurityBaseline": "Baseline di Microsoft Edge",
+ "edgeSecurityBaselinePreview": "Anteprima: baseline di Microsoft Edge",
+ "editionUpgradeConfiguration": "Aggiornamento dell'edizione e cambio di modalità",
+ "firewall": "Windows Firewall",
+ "firewallRules": "Regole di Windows Firewall",
+ "identityProtection": "Protezione account",
+ "identityProtectionPreview": "Protezione account (anteprima)",
+ "mDMSecurityBaseline1810": "Baseline di sicurezza MDM per Windows 10 e versioni successive per ottobre 2018",
+ "mDMSecurityBaseline1810Preview": "Anteprima: Baseline di sicurezza MDM per Windows 10 e versioni successive per ottobre 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Anteprima: Baseline di sicurezza MDM per Windows 10 per ottobre 2018 (beta)",
+ "mDMSecurityBaseline1906": "Baseline di sicurezza MDM per Windows 10 e versioni successive per maggio 2019",
+ "mDMSecurityBaseline2004": "Baseline di sicurezza MDM per Windows 10 e versioni successive per agosto 2020",
+ "mDMSecurityBaseline2101": "Baseline di sicurezza MDM per Windows 10 e versioni successive per dicembre 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "Firewall macOS",
+ "microsoftDefenderBaseline": "Baseline di Microsoft Defender per endpoint",
+ "office365Baseline": "Baseline di Microsoft Office O365",
+ "office365BaselinePreview": "Anteprima: baseline di Microsoft Office O365",
+ "securityBaselines": "Baseline di sicurezza",
+ "test": "Modello di test",
+ "testFirewallRulesSecurityTemplateName": "Regole di Windows Firewall (Test)",
+ "testIdentityProtectionSecurityTemplateName": "Protezione account (test)",
+ "windowsSecurityExperience": "Esperienza di Sicurezza di Windows"
+ },
+ "Firewall": {
+ "mDE": "Windows Firewall"
+ },
+ "FirewallRules": {
+ "mDE": "Regole di Windows Firewall"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "Impostazioni di spostamento cartelle note di OneDrive: Windows 10 nel modello di configurazione cloud. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Protezione dell'account",
+ "administrativeTemplates": "Modelli amministrativi",
+ "androidCompliancePolicy": "Criteri di conformità di Android",
+ "aospDeviceOwnerCompliancePolicy": "Criteri di conformità di Android (AOSP)",
+ "applicationControl": "Controllo app per le aziende",
+ "attackSurfaceReductionRules": "Regole per la riduzione della superficie di attacco",
+ "bitlocker": "BitLocker",
+ "custom": "Personalizzata",
+ "deliveryOptimization": "Ottimizzazione recapito",
+ "derivedPersonalIdentityVerificationCredential": "Credenziale derivata",
+ "deviceControl": "Controllo del dispositivo",
+ "deviceFeatures": "Funzionalità del dispositivo",
+ "deviceFirmwareConfigurationInterface": "Interfaccia di configurazione del firmware del dispositivo",
+ "deviceLock": "Blocco del dispositivo",
+ "deviceOwner": "Profilo di lavoro completamente gestito, dedicato e di proprietà aziendale",
+ "deviceRestrictions": "Limitazioni del dispositivo",
+ "deviceRestrictionsWindows10Team": "Limitazioni del dispositivo (Windows 10 Team)",
+ "domainJoinPreview": "Aggiunta a un dominio",
+ "editionUpgradeAndModeSwitch": "Aggiornamento dell'edizione e cambio di modalità",
+ "education": "Istruzione",
+ "email": "Posta elettronica",
+ "emailSamsungKnoxOnly": "Posta elettronica (solo Samsung KNOX)",
+ "endpointProtection": "Endpoint Protection",
+ "expeditedCheckin": "Configurazione della gestione dei dispositivi mobili",
+ "exploitProtection": "Protezione di Exploit",
+ "extensions": "Estensioni",
+ "hardwareConfigurations": "Configurazioni BIOS e altre impostazioni",
+ "identityProtection": "Identity Protection",
+ "iosCompliancePolicy": "Criteri di conformità di iOS",
+ "kiosk": "Tutto schermo",
+ "localUsersAndGroups": "Appartenenza a gruppi di utenti locali",
+ "macCompliancePolicy": "Criteri di conformità Mac",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Baseline di sicurezza di Microsoft 365 Apps for enterprise",
+ "microsoftDefenderAntivirus": "Antivirus Microsoft Defender",
+ "microsoftDefenderAntivirusexclusions": "Esclusioni di Antivirus Microsoft Defender",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender per endpoint (dispositivi desktop che eseguono Windows 10 o versioni successive)",
+ "microsoftDefenderFirewallRules": "Regole di Windows Firewall",
+ "microsoftDefenderforEndpointSecurityBaseline": "Baseline di sicurezza di Microsoft Defender per endpoint",
+ "microsoftEdgeBaseline": "Baseline di sicurezza per Microsoft Edge",
+ "mxProfileZebraOnly": "Profilo MX (solo Zebra)",
+ "networkBoundary": "Limite di rete",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Esegui l'override dei criteri di gruppo",
+ "pkcsCertificate": "Certificato PKCS",
+ "pkcsImportedCertificate": "Certificato PKCS importato",
+ "preferenceFile": "File delle preferenze",
+ "presets": "Set di impostazioni",
+ "scepCertificate": "Certificato SCEP",
+ "secureAssessmentEducation": "Valutazione sicura (Education)",
+ "securityBaselineForHololens2Advanced": "Baseline di sicurezza avanzata per HoloLens 2",
+ "securityBaselineForHololens2Standard": "Baseline di sicurezza standard per HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Baseline di sicurezza per Microsoft Edge",
+ "settingsCatalog": "Catalogo di impostazioni",
+ "sharedMultiUserDevice": "Dispositivo multiutente condiviso",
+ "softwareUpdates": "Aggiornamenti software",
+ "trustedCertificate": "Certificato attendibile",
+ "unknown": "Sconosciuto",
+ "unsupported": "Non supportata",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi per importazione",
+ "windows10CompliancePolicy": "Criteri di conformità di Windows 10/11",
+ "windows10MobileCompliancePolicy": "Criteri di conformità di Windows 10 Mobile",
+ "windows10XScep": "Certificato SCEP - TEST",
+ "windows10XTrustedCertificate": "Certificato attendibile - TEST",
+ "windows10XVPN": "VPN - TEST",
+ "windows10XWifi": "WIFI - TEST",
+ "windows11SecurityBaseline": "Baseline di sicurezza per Windows 10 e versioni successive",
+ "windows365SecurityBaseline": "Baseline di sicurezza di Windows 365",
+ "windows8CompliancePolicy": "Criteri di conformità di Windows 8",
+ "windowsHealthMonitoring": "Monitoraggio dello stato di Windows",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Criteri di conformità di Windows Phone",
+ "windowsUpdateforBusiness": "Windows Update per le aziende",
+ "wiredNetwork": "Rete cablata",
+ "workProfile": "Profilo di lavoro di proprietà personale"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Rendi disponibile l'aggiornamento gradualmente",
+ "immediateStart": "Rendi disponibile l'aggiornamento il prima possibile",
+ "startDateOnly": "Rendi disponibile l'aggiornamento in una data specifica"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Nega automaticamente",
+ "autoGrant": "Concedi automaticamente",
+ "prompt": "Prompt"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Accesso alla posizione (generico)",
+ "accessFineLocation": "Accesso alla posizione (dettagliato)",
+ "addVoicemail": "Aggiungi messaggio vocale",
+ "bodySensors": "Consenti i dati dei sensori relativi al corpo",
+ "bodySensorsBackground": "Consentire i dati del sensore corporeo in background",
+ "callPhone": "Effettua telefonate",
+ "camera": "Fotocamera",
+ "getAccounts": "Ottieni account",
+ "nearbyDevices": "Dispositivi nelle vicinanze",
+ "nearbyWifiDevices": "Dispositivi Wi-Fi nelle vicinanze",
+ "postNotifications": "Pubblica notifiche",
+ "processOutgoingCalls": "Elabora chiamate in uscita",
+ "readCalendar": "Calendario (lettura)",
+ "readCallLog": "Registro chiamate (lettura)",
+ "readContacts": "Contatti (lettura)",
+ "readExternalStorage": "Archiviazione esterna (lettura)",
+ "readMediaAudio": "Audio multimediale (lettura)",
+ "readMediaImages": "Immagini multimediali (lettura)",
+ "readMediaVideo": "Video multimediale (lettura)",
+ "readPhoneState": "Stato del telefono (lettura)",
+ "readSMS": "SMS (lettura)",
+ "receiveMMS": "MMS (ricezione)",
+ "receiveSMS": "SMS (ricezione)",
+ "receiveWAPPush": "Messaggi push WAP (ricezione)",
+ "recordAudio": "Registra audio",
+ "sendSMS": "SMS (invio)",
+ "useSIP": "Usa il servizio SIP",
+ "writeCalendar": "Calendario (scrittura)",
+ "writeCallLog": "Registro chiamate (scrittura)",
+ "writeContacts": "Contatti (scrittura)",
+ "writeExternalStorage": "Archiviazione esterna (scrittura)"
+ },
+ "RemoveDialog": {
+ "description": "Rimuovere l'autorizzazione?",
+ "title": "Rimuovi"
+ },
+ "TableHeader": {
+ "permission": "Autorizzazione",
+ "permissionGroup": "Gruppo di autorizzazioni",
+ "permissionName": "Nome autorizzazione",
+ "permissionState": "Stato dell'autorizzazione"
+ },
+ "addButtonLabel": "+Aggiungi",
+ "addPermissionTableDescription": "Consente di specificare le autorizzazioni di cui eseguire l'override. Se non vengono scelte/specificate in modo esplicito, verrà applicato il comportamento predefinito.",
+ "addPermissionsTitle": "Aggiungi autorizzazioni",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Altre informazioni sulle autorizzazioni di runtime di Android",
+ "permissionTableDescription": "Le autorizzazioni concesse qui sostituiranno i criteri \"Autorizzazioni delle app predefinite\" per le app selezionate.",
+ "permissionsTitle": "Autorizzazioni"
+ },
+ "AssignmentAction": {
+ "exclude": "Escluso",
+ "include": "Inclusi",
+ "includeAllDevicesVirtualGroup": "Inclusi",
+ "includeAllUsersVirtualGroup": "Inclusi"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search come predefinito",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype for Business",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "File o cartella come requisito selezionato.",
+ "pathToolTip": "Percorso completo del file o della cartella da rilevare.",
+ "property": "Proprietà",
+ "valueToolTip": "Selezionare un valore per il requisito corrispondente al metodo di rilevamento selezionato. I requisiti relativi a data e ora devono essere immessi nel formato locale."
+ },
+ "GridColumns": {
+ "pathOrScript": "Percorso/Script",
+ "type": "Tipo"
+ },
+ "Registry": {
+ "keyPath": "Percorso della chiave",
+ "keyPathTooltip": "Percorso completo della voce del Registro di sistema contenente il valore come requisito.",
+ "operator": "Operator",
+ "operatorTooltip": "Selezionare l'operatore per il confronto.",
+ "registryRequirement": "Requisito relativo alla chiave del Registro di sistema",
+ "registryRequirementTooltip": "Selezionare il confronto per il requisito relativo alla chiave del Registro di sistema.",
+ "valueName": "Nome valore",
+ "valueNameTooltip": "Nome del valore del Registro di sistema obbligatorio."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "File",
+ "registry": "Registro",
+ "script": "Script"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Booleano",
+ "dateTime": "Data e ora",
+ "float": "Virgola mobile",
+ "integer": "Numero intero",
+ "string": "Stringa",
+ "version": "Versione"
+ },
+ "duplicateName": "Il nome {0} per lo script è già stato usato. Immettere un nome diverso.",
+ "enforceSignatureCheck": "Imponi il controllo della firma degli script",
+ "enforceSignatureCheckTooltip": "Selezionare 'Sì' per verificare che lo script sia firmato da un'entità di pubblicazione attendibile, in modo da consentire l'esecuzione dello script senza la visualizzazione di avvisi o richieste. Lo script verrà eseguito senza essere bloccato. Selezionare 'No' (impostazione predefinita) per eseguire lo script con la conferma dell'utente finale, ma senza la verifica della firma.",
+ "loggedOnCredentials": "Esegui lo script con le credenziali dell'utente connesso",
+ "loggedOnCredentialsTooltip": "Eseguire lo script usando le credenziali del dispositivo connesso.",
+ "operatorTooltip": "Selezionare l'operatore per il confronto tra requisiti.",
+ "requirementMethod": "Selezionare il tipo di dati di output",
+ "requirementMethodTooltip": "Selezionare il tipo di dati usato durante la determinazione di un requisito di corrispondenza per il rilevamento.",
+ "scriptContent": "Contenuto dello script",
+ "scriptFile": "File di script",
+ "scriptFileTooltip": "Selezionare uno script di PowerShell che rileverà la presenza dell'app sul client. Se l'app viene rilevata, il processo relativo ai requisiti fornirà un codice di uscita con valore 0 e scriverà un valore di stringa in STDOUT.",
+ "scriptName": "Nome script",
+ "value": "Valore",
+ "valueTooltip": "Selezionare un valore per il requisito corrispondente al metodo di rilevamento selezionato. I requisiti relativi a data e ora devono essere immessi nel formato locale."
+ },
+ "bladeTitle": "Aggiungi una regola relativa ai requisiti",
+ "createRequirementHeader": "Creare un requisito.",
+ "header": "Configurare regole aggiuntive relative ai requisiti",
+ "label": "Regole aggiuntive relative ai requisiti",
+ "noRequirementsSelectedPlaceholder": "Non sono stati specificati requisiti.",
+ "requirementType": "Tipo di requisito",
+ "requirementTypeTooltip": "Scegliere il tipo di metodo di rilevamento usato per determinare la modalità di convalida di un requisito."
+ },
+ "architectures": "Architettura del sistema operativo",
+ "architecturesTooltip": "Scegliere le architetture necessarie per installare l'app.",
+ "bladeTitle": "Requisiti",
+ "diskSpace": "Spazio su disco necessario (MB)",
+ "diskSpaceTooltip": "Spazio su disco disponibile necessario nell'unità di sistema per installare l'app.",
+ "header": "Specificare i requisiti che i dispositivi devono rispettare prima dell'installazione dell'app:",
+ "maximumTextFieldValue": "Il valore non può essere maggiore di {0}.",
+ "minimumCpuSpeed": "Velocità di CPU minima necessaria (MHz)",
+ "minimumCpuSpeedTooltip": "Velocità di CPU minima necessaria per installare l'app.",
+ "minimumLogicalProcessors": "Numero minimo di processori logici necessari",
+ "minimumLogicalProcessorsTooltip": "Numero minimo di processori logici necessari per installare l'app.",
+ "minimumOperatingSystem": "Sistema operativo minimo",
+ "minimumOperatingSystemTooltip": "Selezionare il sistema operativo minimo necessario per installare l'app.",
+ "minumumTextFieldValue": "Il valore deve essere almeno {0}.",
+ "physicalMemory": "Memoria fisica necessaria (MB)",
+ "physicalMemoryTooltip": "Memoria fisica (RAM) necessaria per installare l'app.",
+ "selectorLabel": "Requisiti",
+ "validNumber": "Immettere un numero valido."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filtro",
+ "assignmentFilterTypeColumnHeader": "Modalità filtro",
+ "assignmentToast": "Notifiche per l'utente finale",
+ "assignmentTypeTableHeader": "TIPO DI ASSEGNAZIONE",
+ "autoUpdate": "Aggiornamento automatico",
+ "deadlineTimeColumnLabel": "Scadenza installazione",
+ "deliveryOptimizationPriorityHeader": "Priorità di ottimizzazione recapito",
+ "groupTableHeader": "Gruppo",
+ "installContextLabel": "Contesto di installazione",
+ "isRemovable": "Installa come rimovibile",
+ "licenseTypeLabel": "Tipo di licenza",
+ "modeTableHeader": "Modalità gruppo",
+ "policySet": "Set di criteri",
+ "preventAutoAppUpdate": "Impedisci aggiornamenti automatici delle app",
+ "preventManagedAppBackup": "Impedire il backup dell'app iCloud",
+ "restartGracePeriodHeader": "Periodo di tolleranza per il riavvio",
+ "startTimeColumnLabel": "Disponibilità",
+ "tracks": "Tracce",
+ "uninstallOnRemoval": "Disinstalla alla rimozione del dispositivo",
+ "updateMode": "Priorità di aggiornamento",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "App Web AAD",
+ "androidEnterpriseSystemApp": "App del sistema Android Enterprise",
+ "androidForWorkApp": "App di Google Play Store gestito",
+ "androidLobApp": "App line-of-business Android",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "App Android predefinita",
+ "builtInApp": "App predefinita",
+ "builtInIos": "App iOS predefinita",
+ "iosIPadOSWebClip": "Clip Web iOS/iPadOS",
+ "iosLobApp": "App line-of-business iOS",
+ "iosStoreApp": "App Store iOS",
+ "iosVppApp": "App Volume Purchase Program iOS",
+ "lineOfBusinessApp": "App line-of-business",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "App line-of-business macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Famiglia di prodotti Office per macOS",
+ "macOSPkgApp": "App macOS (PKG)",
+ "macOSWebClip": "Clip Web macOS",
+ "macOsVppApp": "App Volume Purchase Program macOS",
+ "managedAndroidLobApp": "App line-of-business Android gestita",
+ "managedAndroidStoreApp": "App di Android Store gestita",
+ "managedGooglePlayApp": "App di Google Play Store gestito",
+ "managedGooglePlayPrivateApp": "App privata di Google Play gestito",
+ "managedGooglePlayWebApp": "Collegamento Web di Google Play gestito",
+ "managedIosLobApp": "App line-of-business iOS gestita",
+ "managedIosStoreApp": "App dello Store iOS gestita",
+ "microsoftStoreForBusinessApp": "App di Microsoft Store per le aziende",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store per le aziende",
+ "officeAddIn": "Componente aggiuntivo per Office",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 e versioni successive)",
+ "sharePointApp": "App SharePoint",
+ "teamsApp": "App Teams",
+ "webApp": "Collegamento Web",
+ "win32CatalogApp": "App del catalogo di Windows (Win32)",
+ "winGetPublicApp": "Repository della community di Gestione pacchetti Windows",
+ "winGetStoreApp": "App Microsoft Store (novità)",
+ "windowsAppXLobApp": "App line-of-business AppX per Windows",
+ "windowsClassicApp": "App Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 e versioni successive)",
+ "windowsMobileMsiLobApp": "App line-of-business di Windows MSI",
+ "windowsPhone81AppXBundleLobApp": "App line-of-business AppX per Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "App line-of-business AppX per Windows Phone 8.1",
+ "windowsPhone81StoreApp": "App dello Store per Windows Phone 8.1",
+ "windowsPhoneXapLobApp": "App line-of-business XAP per Windows Phone",
+ "windowsStoreApp": "App Microsoft Store (legacy)",
+ "windowsUniversalAppXLobApp": "App line-of-business AppX universale per Windows",
+ "windowsUniversalLobApp": "App line-of-business universale di Windows",
+ "windowsWebApp": "Link Web Windows"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Escluso",
+ "include": "Incluso",
+ "includeAllDevicesVirtualGroup": "Incluso",
+ "includeAllUsersVirtualGroup": "Incluso"
+ },
+ "AssignmentToast": {
+ "hideAll": "Nascondi tutte le notifiche di tipo avviso popup",
+ "showAll": "Mostra tutte le notifiche di tipo avviso popup",
+ "showReboot": "Mostra le notifiche di tipo avviso popup per i riavvii dei computer"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Sì",
+ "notConfigured": "No"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Download del contenuto in {0}",
+ "foreground": "Primo piano",
+ "header": "Priorità di ottimizzazione recapito"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "L'installazione dell'app può forzare il riavvio del dispositivo",
+ "basedOnReturnCode": "Determinare il comportamento in base ai codici restituiti",
+ "force": "Intune forzerà il riavvio obbligatorio del dispositivo",
+ "suppress": "Nessuna azione specifica"
+ },
+ "FilterType": {
+ "exclude": "Escludi",
+ "include": "Includi",
+ "none": "Nessuno"
+ },
+ "InstallIntent": {
+ "available": "Disponibile per i dispositivi registrati",
+ "availableWithoutEnrollment": "Disponibile con o senza registrazione",
+ "notApplicable": "Non applicabile",
+ "required": "Obbligatorio",
+ "uninstall": "Disinstalla"
+ },
+ "SettingType": {
+ "assignmentType": "Tipo di assegnazione",
+ "deviceLicensing": "Tipo di licenza",
+ "installContext": "Disinstalla alla rimozione del dispositivo",
+ "toastSettings": "Notifiche per l'utente finale",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Predefinito",
+ "postponed": "Posticipata",
+ "priority": "Priorità alta"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Errore",
+ "hardReboot": "Avvio a freddo",
+ "retry": "Riprova",
+ "softReboot": "Avvio a caldo",
+ "success": "Operazione completata"
+ },
+ "Columns": {
+ "codeType": "Tipo di codice",
+ "returnCode": "Codice restituito"
+ },
+ "bladeTitle": "Codici restituiti",
+ "gridAriaLabel": "Codici restituiti",
+ "header": "Specificare i codici restituiti per indicare il comportamento successivo all'installazione:",
+ "onAddAnnounceMessage": "Codice restituito all'aggiunta dell'elemento {0} di {1}",
+ "onDeleteSuccess": "Il codice restituito {0} è stato eliminato",
+ "returnCodeAlreadyUsedValidation": "Il codice restituito è già in uso.",
+ "returnCodeMustBeIntegerValidation": "Il codice restituito deve essere un numero intero.",
+ "returnCodeShouldBeAtLeast": "Il codice restituito deve essere almeno {0}.",
+ "returnCodeShouldBeAtMost": "Il codice restituito deve essere al massimo {0}.",
+ "selectorLabel": "Codici restituiti"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone e iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Aggiungi limite di rete",
+ "addNetworkBoundaryButton": "Aggiungi limite di rete...",
+ "allowWindowsSearch": "Consenti a Windows Search di eseguire una ricerca nei dati aziendali crittografati e nelle app dello Store",
+ "authoritativeIpRanges": "L'elenco di intervalli IP aziendali è autorevole (non rilevare automaticamente)",
+ "authoritativeProxyServers": "L'elenco di server proxy aziendali è autorevole (non rilevare automaticamente)",
+ "boundaryType": "Tipo di limite",
+ "cloudResources": "Risorse cloud",
+ "corporateIdentity": "Identità aziendale",
+ "dataRecoveryCert": "Caricare un certificato dell'agente di recupero dati per consentire il recupero dei dati crittografati",
+ "editNetworkBoundary": "Modifica il limite di rete",
+ "enrollmentState": "Stato della registrazione",
+ "iPv4Ranges": "Intervalli IPv4",
+ "iPv6Ranges": "Intervalli IPv6",
+ "internalProxyServers": "Server proxy interni",
+ "maxInactivityTime": "Intervallo di tempo massimo (in minuti) consentito in caso di inattività del dispositivo dopo il quale il dispositivo verrà bloccato tramite PIN o password",
+ "maxPasswordAttempts": "Numero di errori di autenticazione consentiti prima della cancellazione dei dati del dispositivo",
+ "mdmDiscoveryUrl": "URL individuazione MDM",
+ "mdmRequiredSettingsInfo": "Questo criterio è applicabile solo a Windows 10 Anniversary Edition e versioni successive. Il criterio usa Windows Information Protection (WIP) per applicare la protezione.",
+ "minimumPinLength": "Imposta il numero minimo di caratteri necessari per il PIN",
+ "name": "Nome",
+ "networkBoundariesGridEmptyText": "Eventuali limiti di rete aggiunti verranno visualizzati qui",
+ "networkBoundary": "Limite di rete",
+ "networkDomainNames": "Domini di rete",
+ "neutralResources": "Risorse neutre",
+ "passportForWork": "Usa Windows Hello for Business come metodo per l'accesso a Windows",
+ "pinExpiration": "Specificare il periodo di tempo (in giorni) durante il quale è possibile usare un PIN prima che il sistema richieda all'utente di modificarlo",
+ "pinHistory": "Specificare il numero di PIN precedenti che possono essere associati a un account utente e non possono essere riutilizzati",
+ "pinLowercaseLetters": "Configura l'uso di lettere minuscole nel PIN di Windows Hello for Business",
+ "pinSpecialCharacters": "Configura l'uso di caratteri speciali nel PIN di Windows Hello for Business",
+ "pinUppercaseLetters": "Configura l'uso di lettere maiuscole nel PIN di Windows Hello for Business",
+ "protectUnderLock": "Impedisci alle app di accedere ai dati aziendali quando il dispositivo è bloccato. Si applica solo a Windows 10 Mobile",
+ "protectedDomainNames": "Domini protetti",
+ "proxyServers": "Server proxy",
+ "requireAppPin": "Disabilita il PIN dell'app quando il PIN del dispositivo è gestito",
+ "requiredSettings": "Impostazioni obbligatorie",
+ "requiredSettingsInfo": "La modifica dell'ambito o la rimozione del criterio comporterà la decrittografia dei dati aziendali.",
+ "revokeOnMdmHandoff": "Revoca l'accesso ai dati protetti quando il dispositivo esegue la registrazione a MDM",
+ "revokeOnUnenroll": "Revoca le chiavi di crittografia all'annullamento della registrazione",
+ "rmsTemplateForEdp": "Specificare l'ID del modello da usare per Azure RMS",
+ "showWipIcon": "Mostra l'icona di Protezione dei dati aziendali",
+ "type": "Tipo",
+ "useRmsForWip": "Usa Azure RMS per WIP",
+ "value": "Valore",
+ "weRequiredSettingsInfo": "Questo criterio è applicabile solo a Windows 10 Creators Update e versioni successive. Il criterio usa Windows Information Protection (WIP) e Windows MAM per applicare la protezione.",
+ "wipProtectionMode": "Modalità di Windows Information Protection",
+ "withEnrollment": "Con registrazione",
+ "withoutEnrollment": "Senza registrazione"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabo",
+ "bulgarian": "Bulgaro",
+ "chineseSimplified": "Cinese (semplificato)",
+ "chineseTraditional": "Cinese (tradizionale)",
+ "croatian": "Croato",
+ "czech": "Ceco",
+ "danish": "Danese",
+ "dutch": "Olandese",
+ "englishUK": "Inglese (Regno Unito)",
+ "englishUS": "Inglese (Stati Uniti)",
+ "estonian": "Estone",
+ "finnish": "Finlandese",
+ "frenchCanada": "Francese (Canada)",
+ "frenchFrance": "Francese (Francia)",
+ "german": "Tedesco",
+ "greek": "Greco",
+ "hebrew": "Ebraico",
+ "hungarian": "Ungherese",
+ "italian": "Italiano",
+ "japanese": "Giapponese",
+ "korean": "Coreano",
+ "latvian": "Lettone",
+ "lithuanian": "Lituano",
+ "norwegian": "Norvegese (Bokmål)",
+ "polish": "Polacco",
+ "portugueseBrazil": "Portoghese (Brasile)",
+ "portuguesePortugal": "Portoghese (Portogallo)",
+ "romanian": "Rumeno",
+ "russian": "Russo",
+ "serbian": "Serbo",
+ "slovak": "Slovacco",
+ "slovenian": "Sloveno",
+ "spanishMexico": "Spagnolo (Messico)",
+ "spanishSpain": "Spagnolo (Spagna)",
+ "swedish": "Svedese",
+ "thai": "Thai",
+ "turkish": "Turco",
+ "ukrainian": "Ucraino"
+ },
+ "Summary": {
+ "placeholder": "Selezionare un messaggio di notifica a sinistra per visualizzare in anteprima i contenuti."
+ },
+ "companyContact": "Mostra informazioni di contatto",
+ "companyLogo": "Mostra il logo della società",
+ "companyName": "Mostra il nome della società",
+ "createEditDescription": "Creare o modificare i modelli di messaggio di notifica.",
+ "createMessage": "Crea il messaggio",
+ "deviceDetails": "Mostra dettagli del dispositivo",
+ "deviceDetailsInfoBox": "Questa impostazione è disattivata per impostazione predefinita perché il recupero dei dettagli del dispositivo può causare un ritardo nella ricezione delle notifiche tramite posta elettronica.",
+ "editImpactInfo": "La modifica del modello del messaggio di notifica interesserà tutti i criteri che usano questo modello.",
+ "editMessage": "Modifica il messaggio",
+ "email": "posta elettronica",
+ "emailFooterTitle": "Piè di pagina del messaggio di posta elettronica",
+ "emailHeaderFooterInfo": "Le impostazioni per intestazione e piè di pagina di posta elettronica per le notifiche tramite posta elettronica si basano sulle impostazioni di personalizzazione nel nodo di amministrazione del tenant in Endpoint Manager.",
+ "emailHeaderTitle": "Intestazione di messaggio di posta elettronica",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Configurare le impostazioni di personalizzazione",
+ "formSubTitle": "Crea o modifica i messaggi di posta elettronica di notifica",
+ "headerFooterSettingsTab": "Impostazioni intestazione e piè di pagina",
+ "imgPreview": "Anteprima immagine",
+ "infotext": "Selezionare un messaggio di notifica. Per creare una nuova notifica, vedere Notifica nella sezione Gestisci nel carico di lavoro Imposta la conformità dei dispositivi.",
+ "iwLink": "Mostra il collegamento al sito Web del Portale aziendale",
+ "listEmpty": "Non sono presenti modelli di messaggio.",
+ "listEmptySelectOnly": "Non sono presenti modelli di messaggio. Per creare una nuova notifica, vedere Notifiche nella sezione Gestisci nel carico di lavoro Imposta la conformità dei dispositivi.",
+ "listSubTitle": "Elenco di modelli di messaggi di notifica",
+ "listTitle": "Modelli del messaggio di notifica",
+ "localizedNotificationMessageTemplates": "Modelli di messaggi di notifica localizzati",
+ "messageAssigned": "Non è possibile eliminare questo modello di messaggio perché è attualmente usato da uno o più criteri di conformità.",
+ "messageCapitalized": "Modello del messaggio di notifica",
+ "messageLowercase": "modello del messaggio di notifica",
+ "missingDefaultError": "Selezionare un modello predefinito",
+ "notificationMessageTemplates": "Modelli del messaggio di notifica",
+ "rowValidationError": "È necessario almeno un modello di messaggio",
+ "selectDescription": "Selezionare un messaggio di notifica. Per creare una nuova notifica, vedere Notifiche nella sezione Gestisci nel carico di lavoro Imposta la conformità dei dispositivi.",
+ "tenantValueText": "Valore tenant",
+ "testEmailLabel": "Invia il messaggio di posta elettronica di anteprima",
+ "localeLabel": "Impostazioni locali",
+ "isDefaultLocale": "È predefinito"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Configurare i dispositivi per il provisioning iniziale.",
+ "title": "Preparazione del dispositivo"
+ },
+ "EnrollmentSettings": {
+ "description": "Configurare le impostazioni di registrazione, ad esempio il blocco della registrazione e l'assegnazione agli utenti.",
+ "title": "Impostazioni di registrazione"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Consente di configurare le impostazioni che gli utenti possono usare per ripristinare Windows da un'unità flash di avvio.",
+ "menuTitle": "Configurazione di ripristino del sistema operativo Windows"
+ },
+ "coManagementAuthorityDesc": "Consente di configurare le impostazioni di co-gestione per l'integrazione di Configuration Manager",
+ "coManagementAuthorityTitle": "Impostazioni di co-gestione ",
+ "deploymentProfiles": "Profili di distribuzione di Windows AutoPilot",
+ "description": "Informazioni sui sette modi diversi in cui utenti o amministratori possono registrare in Intune un computer Windows 10/11.",
+ "descriptionLabel": "Metodi di registrazione di Windows",
+ "enrollmentStatusPage": "Pagina relativa allo stato della registrazione"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Selezionare il numero di bit contenuti nella chiave.",
+ "keyUsage": "Specificare l'azione crittografica necessaria per lo scambio della chiave pubblica del certificato.",
+ "renewalThreshold": "Immettere la percentuale (tra 1 e 99 percento) della durata rimanente del certificato consentita prima che un dispositivo possa richiedere il rinnovo del certificato. Il valore consigliato in Intune è 20%. (1-99)",
+ "rootCert": "Scegliere un profilo di certificato della CA radice configurato e assegnato in precedenza. Il certificato della CA deve corrispondere al certificato radice della CA che rilascia il certificato per questo profilo, ovvero per il profilo attualmente in fase di configurazione.",
+ "scepServerUrl": "Immettere un URL per il server NDES che rilascia certificati tramite SCEP. L'URL deve essere di tipo HTTPS, ad esempio, https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Aggiungere uno o più URL per il server NDES che rilascia certificati tramite SCEP. L'URL deve essere di tipo HTTPS, ad esempio, https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Nome alternativo del soggetto",
+ "subjectNameFormat": "Formato nome soggetto",
+ "validityPeriod": "Quantità di tempo rimanente prima della scadenza del certificato. Immettere un valore uguale o inferiore al periodo di validità indicato nel modello di certificato. L'impostazione predefinita è un anno."
+ },
+ "appInstallContext": "Specifica il contesto di installazione da associare all'app. Per le app a modalità doppia, selezionare il contesto da usare per l'app. Per tutte le altre app l'opzione è preselezionata in base al pacchetto e non può essere modificata.",
+ "autoUpdateMode": "Configurare la priorità di aggiornamento per l'app. Selezionare Impostazione predefinita per richiedere che il dispositivo sia connesso al WiFi, che sia in carica e che non sia attivamente in uso prima di aggiornare l'app. Seleziona Priorità alta per aggiornare l'app non appena lo sviluppatore ha pubblicato l'app, indipendentemente dallo stato di addebito, dalla funzionalità WiFi o dall'attività dell'utente finale nel dispositivo. Selezionare Posponi per la revoca degli aggiornamenti dell'app per un massimo di 90 giorni. La priorità alta e il posticipo avranno effetto solo sui dispositivi DO.",
+ "configurationSettingsFormat": "Testo del formato delle impostazioni di configurazione",
+ "ignoreVersionDetection": "Impostare questa opzione su \"Sì\" per le app aggiornate automaticamente dallo sviluppatore dell'app, ad esempio Google Chrome.",
+ "ignoreVersionDetectionMacOSLobApp": "Selezionare \"Sì\" per le app che vengono caricate automaticamente dallo sviluppatore dell'app o per verificare solo il valore bundleID dell'app prima dell'installazione. Selezionare \"No\" per verificare il valore bundleID e il numero di versione prima dell'installazione.",
+ "installAsManagedMacOSLobApp": "Questa impostazione è applicabile solo a macOS 11 e versioni successive. L'app verrà installata ma non gestita in macOS 10.15 e versioni precedenti.",
+ "installContextDropdown": "Selezionare il contesto di installazione appropriato. Il contesto utente installerà l'app solo per l'utente interessato mentre il contesto di dispositivo installerà l'app per tutti gli utenti nel dispositivo.",
+ "ldapUrl": "Nome host LDAP in cui i client possono ottenere le chiavi di crittografia pubbliche per i destinatari dei messaggi di posta elettronica. I messaggi verranno crittografati quando è disponibile una chiave. Formati supportati:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Selezionare le autorizzazioni di runtime per l'app associata.",
+ "policyAssociatedApp": "Selezionare l'app a cui verrà associato questo criterio.",
+ "policyConfigurationSettings": "Selezionare il metodo da usare per definire le impostazioni di configurazione per questo criterio.",
+ "policyDescription": "Immettere facoltativamente una descrizione per questo criterio di configurazione.",
+ "policyEnrollmentType": "Scegliere se queste impostazioni vengono gestite tramite la gestione dei dispositivi o tramite app create con Intune SDK.",
+ "policyName": "Immettere un nome per questo criterio di configurazione.",
+ "policyPlatform": "Selezionare la piattaforma a cui verrà applicato questo criterio di configurazione dell'app.",
+ "policyProfileType": "Selezionare i tipi di profilo del dispositivo a cui verrà applicato questo profilo di configurazione dell'app",
+ "policySMime": "Configurare le impostazioni per la firma e la crittografia S/MIME per Outlook.",
+ "sMimeDeployCertsFromIntune": "Specificare se i certificati S/MIME verranno recapitati o meno da Intune per l'uso con Outlook.\r\nIntune può distribuire automaticamente certificati di firma e di crittografia agli utenti tramite il Portale aziendale.",
+ "sMimeEnable": "Specificare se i controlli S/MIME sono abilitati o meno durante la composizione di un messaggio di posta elettronica",
+ "sMimeEnableAllowChange": "Specificare se l'utente è autorizzato a modificare l'impostazione Abilita S/MIME.",
+ "sMimeEncryptAllEmails": "Specificare se tutti i messaggi di posta elettronica devono essere crittografati o meno.\r\nLa crittografia converte i dati in testo crittografato in modo che possano essere letti solo dal destinatario previsto.",
+ "sMimeEncryptAllEmailsAllowChange": "Specificare se l'utente è autorizzato a modificare l'impostazione Crittografa tutti i messaggi di posta elettronica.",
+ "sMimeEncryptionCertProfile": "Specificare il profilo del certificato per la crittografia della posta elettronica.",
+ "sMimeSignAllEmails": "Specificare se tutti i messaggi di posta elettronica devono essere firmati o meno.\r\nUna firma digitale verifica l'autenticità del messaggio di posta elettronica e assicura che i contenuti non siano stati manomessi durante il transito.",
+ "sMimeSignAllEmailsAllowChange": "Specificare se l'utente è autorizzato a modificare l'impostazione Firma tutti i messaggi di posta elettronica.",
+ "sMimeSigningCertProfile": "Specificare il profilo del certificato per la firma della posta elettronica.",
+ "sMimeUserNotificationType": "Metodo per segnalare agli utenti che è necessario aprire il Portale aziendale per recuperare certificati S/MIME per Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} è incluso in uno o più set di criteri. Se si elimina {0}, non sarà più possibile assegnarlo tramite questi set di criteri. Eliminarlo comunque?",
+ "contentWithError": "È possibile che {0} sia incluso in uno o più set di criteri. Se si elimina {0}, non sarà più possibile assegnarlo tramite questi set di criteri. Eliminarlo comunque?",
+ "header": "Eliminare questa restrizione?"
+ },
+ "DeviceLimit": {
+ "description": "Specificare il numero massimo di dispositivi che un utente può registrare.",
+ "header": "Restrizioni sul limite di dispositivi",
+ "info": "Consente di definire il numero di dispositivi che ogni utente può registrare."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Deve essere 1.0 o successiva.",
+ "android": "Immettere un numero di versione valido. Esempi: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Immettere un numero di versione valido. Esempi: 5.0, 5.1.1",
+ "iOS": "Immettere un numero di versione valido. Esempi: 9.0, 10.0, 9.0.2",
+ "mac": "Immettere un numero di versione valido. Esempi: 10, 10.10, 10.10.1",
+ "min": "Il valore minimo non può essere inferiore a {0}",
+ "minMax": "La versione minima non può essere superiore alla versione massima.",
+ "windows": "Deve essere 10.0 o versioni successive. Lasciare vuoto per consentire i dispositivi 8.1",
+ "windowsMobile": "Deve essere 10.0 o versioni successive. Lasciare vuoto per consentire i dispositivi 8.1"
+ },
+ "allPlatformsBlocked": "Tutte le piattaforme dei dispositivi sono bloccate. Consentire la registrazione della piattaforma per abilitare la configurazione della piattaforma.",
+ "blockManufacturerPlaceHolder": "Nome del produttore",
+ "blockManufacturersHeader": "Produttori bloccati",
+ "cannotRestrict": "La restrizione non è supportata",
+ "configurationDescription": "Specificare le restrizioni della configurazione della piattaforma da soddisfare per consentire la registrazione di un dispositivo. Usare i criteri di conformità per limitare i dispositivi dopo la registrazione. Definire le versioni come major.minor.build. Le restrizioni sulla versione sono applicabili solo ai dispositivi registrati nel portale aziendale. Intune classifica i dispositivi come di proprietà personale per impostazione predefinita. Per classificare i dispositivi come di proprietà dell'azienda sono necessarie azioni aggiuntive.",
+ "configurationDescriptionLabel": "Altre informazioni sulla configurazione delle restrizioni della registrazione",
+ "configurations": "Configura le piattaforme",
+ "deviceManufacturer": "Produttore dispositivo",
+ "header": "Restrizioni dei tipi di dispositivo",
+ "info": "Consente di definire le piattaforme, le versioni e i tipi di gestione autorizzati alla registrazione.",
+ "manufacturer": "Produttore",
+ "max": "Max",
+ "maxVersion": "Versione massima",
+ "min": "Min",
+ "minVersion": "Versione minima",
+ "newPlatforms": "Sono state autorizzate nuove piattaforme. Prendere in considerazione l'aggiornamento delle configurazioni delle piattaforme.",
+ "personal": "Di proprietà personale",
+ "platform": "Piattaforma",
+ "platformDescription": "È possibile consentire la registrazione delle piattaforme seguenti. Bloccare solo le piattaforme che non verranno supportate. Le piattaforme consentite possono essere configurate con restrizioni registrazione aggiuntive.",
+ "platformSettings": "Impostazioni piattaforma",
+ "platforms": "Seleziona le piattaforme",
+ "platformsSelected": "{0} piattaforme selezionate",
+ "type": "Tipo",
+ "versions": "versioni",
+ "versionsRange": "Consenti un intervallo min/max:",
+ "windowsTooltip": "Consente di limitare la registrazione tramite Mobile Device Management. Non limita l'installazione dell'agente del computer. Sono supportate solo le versioni Windows 10 e Windows 11. Lasciare le versioni vuote per consentire Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Le priorità delle restrizioni sono state salvate."
+ },
+ "Row": {
+ "announce": "Priorità: {0}, nome: {1}, assegnata: {2}"
+ },
+ "Table": {
+ "deployed": "Distribuito",
+ "name": "Nome",
+ "priority": "Priorità"
+ },
+ "Type": {
+ "limit": "Restrizione sul limite di dispositivi",
+ "type": "Restrizione dei tipi di dispositivo"
+ },
+ "allUsers": "Tutti gli utenti",
+ "androidRestrictions": "Restrizioni Android",
+ "create": "Crea restrizione",
+ "defaultLimitDescription": "Restrizione sul limite di dispositivi predefinita applicata con la priorità più bassa a tutti gli utenti, indipendentemente dall'appartenenza ai gruppi.",
+ "defaultTypeDescription": "Restrizione sul tipo di dispositivi predefinita applicata con la priorità più bassa a tutti gli utenti, indipendentemente dall'appartenenza ai gruppi.",
+ "defaultWhfbDescription": "Questa è la configurazione predefinita di Windows Hello for Business applicata con la priorità più bassa a tutti gli utenti, indipendentemente dall'appartenenza ai gruppi.",
+ "deleteMessage": "Gli utenti interessati saranno limitati dalla restrizione di priorità più elevata successiva assegnata o dalla restrizione predefinita, se non sono assegnate altre restrizioni.",
+ "deleteTitle": "Eliminare la restrizione {0}?",
+ "descriptionHint": "Breve paragrafo che illustra l'uso aziendale o il livello di restrizione caratterizzato dalle impostazioni di restrizione.",
+ "edit": "Modifica la restrizione",
+ "info": "Un dispositivo deve essere conforme alle restrizioni della registrazione con priorità più elevata assegnate al rispettivo utente. È possibile trascinare una restrizione del dispositivo per modificarne la priorità. Le restrizioni predefinite hanno la priorità più bassa per tutti gli utenti e regolamentano le registrazioni senza utenti. Le restrizioni predefinite possono essere modificate ma non eliminate.",
+ "iosRestrictions": "Restrizioni iOS",
+ "mDM": "Gestione dispositivi mobili",
+ "macRestrictions": "Restrizioni macOS",
+ "maxVersion": "Versione massima",
+ "minVersion": "Versione minima",
+ "nameHint": "Questo sarà l'attributo principale visibile per l'identificazione del set di restrizioni.",
+ "noAssignmentsStatusBar": "Assegnare la restrizione ad almeno un gruppo. Fare clic su Proprietà.",
+ "nonAdminForbiddenCreateError": "Per creare, modificare o eliminare restrizioni, è necessario essere un servizio o un amministratore globale di Intune.",
+ "nonAdminForbiddenEdit": "Devi essere un amministratore per modificare le restrizioni.",
+ "notFound": "La limitazione non è stata trovata. È possibile che sia già stata eliminata.",
+ "personallyOwned": "Dispositivi di proprietà personale",
+ "restriction": "Restrizione",
+ "restrictionLowerCase": "restrizione",
+ "restrictionType": "Tipo restrizione",
+ "selectType": "Selezionare il tipo di restrizione",
+ "selectValidation": "Selezionare una piattaforma",
+ "typeHint": "Scegliere Restrizione dei tipi di dispositivo per limitare le proprietà dei dispositivi. Scegliere Restrizione sul limite di dispositivi per limitare il numero di dispositivi per utente.",
+ "typeRequired": "Il tipo di restrizione è obbligatorio.",
+ "winPhoneRestrictions": "Restrizioni Windows Phone",
+ "windowsECv1Info": "Le restrizioni di registrazione meno recenti non possono essere modificate o ridimensionate, ma solo eliminate.",
+ "windowsECv2Info": "È possibile dare priorità alle restrizioni di registrazione trascinandole e rilasciandole. Di seguito sono elencate le restrizioni predefinite e preconfigurate. Tutte le nuove restrizioni di registrazione avranno una priorità superiore rispetto alle restrizioni predefinite e preconfigurate.",
+ "windowsRestrictions": "Restrizioni Windows",
+ "windowsRestrictionsPreview": "Restrizioni di Windows basate su filtro (anteprima)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 giorno",
+ "twoDays": "2 giorni",
+ "zeroDays": "0 giorni"
+ },
+ "SecurityTemplate": {
+ "aSR": "Riduzione della superficie di attacco",
+ "accountProtection": "Protezione account",
+ "allDevices": "Tutti i dispositivi",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Report dell'antivirus (anteprima)",
+ "conditionalAccess": "Accesso condizionale",
+ "deviceCompliance": "Conformità del dispositivo",
+ "diskEncryption": "Crittografia del disco",
+ "eDR": "Rilevamento di endpoint e risposta",
+ "ePM": "Gestione dei privilegi endpoint",
+ "firewall": "Firewall",
+ "helpSupport": "Guida e supporto tecnico",
+ "setup": "Installazione",
+ "wdapt": "Microsoft Defender per endpoint"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Configurazione della protezione dei dati"
+ },
+ "OrganizeMailByThread": {
+ "title": "Organizza i messaggi in base al thread",
+ "tooltip": "Il comportamento predefinito in Outlook prevede l'aggregazione delle conversazioni tramite posta elettronica in una visualizzazione di conversazioni in thread. Se questa impostazione è disabilitata, Outlook visualizzerà ogni messaggio individualmente e non raggrupperà i messaggi in base al thread."
+ },
+ "Sync": {
+ "header": "Configurazione della sincronizzazione dei campi del contatto con i contatti nativi dell'app"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
+ "allowBiometricsTitle": "Rendi obbligatori i dati biometrici per l'accesso all'app",
+ "allowBiometricsTooltip": "Le funzionalità di biometria, ad esempio TouchID o FaceID, possono essere obbligatorie per l'accesso degli utenti al proprio dispositivo. Quando sono obbligatorie, le funzionalità di biometria vengono usate in aggiunta al metodo di autenticazione selezionato in questo profilo. Questa impostazione non deve essere abilitata quando sono distribuiti i Criteri di protezione delle app di Intune, perché i criteri di protezione delle app includono requisiti di accesso prima dell'accesso ai dati gestiti. L'abilitazione di entrambe le opzioni provocherà la visualizzazione di più richieste di accesso per l'accesso a Outlook Mobile. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
+ "allowCalendarNotificationsTitle": "Notifiche del calendario",
+ "allowCalendarNotificationsTooltip": "È possibile consentire alle notifiche del calendario di visualizzare i dettagli completi quando l'impostazione \"Notifiche sui dati dell'organizzazione\" di Criteri di protezione dell'app è impostata su \"Blocca i dati dell'organizzazione\".",
+ "allowDefaultAppSignatureTitle": "Firma dell'app predefinita",
+ "allowDefaultAppSignatureTooltip": "L\\'opzione Firma dell\\'app predefinita indica se l\\'app userà \\\"Ottieni Outlook per iOS\\\" come firma predefinita durante la composizione del messaggio. Se l\\'impostazione è configurata come Off, la firma predefinita non verrà usata. Gli utenti possono tuttavia aggiungere la propria firma. Se l\\'opzione è impostata su Non configurata, l\\'impostazione predefinita dell\\'app è On.",
+ "allowExternalRecipientsMailTipTitle": "Avviso messaggio per destinatari esterni",
+ "allowExternalRecipientsMailTipTooltip": "L'Avviso messaggio per destinatari esterni viene visualizzato se il mittente aggiunge un destinatario esterno o se aggiunge un gruppo di distribuzione che include destinatari esterni. Questo avviso messaggio segnala ai mittenti se il messaggio che stanno scrivendo uscirà dall'organizzazione, aiutandoli a prendere le decisioni appropriate a livello di formulazione, tono e contenuto. Disponibile solo per account Exchange Online e account locali che sfruttano i vantaggi dell'autenticazione moderna ibrida. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è On.",
+ "allowFocusedInboxTitle": "Posta in arrivo evidenziata",
+ "allowFocusedInboxTooltip": "Posta in arrivo evidenziata separa la cartella della posta in arrivo in due schede: Evidenziata e Altra. I messaggi di posta elettronica più importanti si trovano nella scheda Evidenziata, mentre gli altri messaggi rimangono facilmente accessibili, ma non visualizzati, nella scheda Altra. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
+ "allowMailNotificationsTitle": "Notifiche tramite posta elettronica",
+ "allowMailNotificationsTooltip": "Questo valore indica se Outlook consentirà le notifiche di posta elettronica. Se si imposta il valore su No, le notifiche di posta elettronica verranno disabilitate.",
+ "allowOrgDataOnWearablesTitle": "Dati dell'organizzazione nei dispositivi indossabili",
+ "allowOrgDataOnWearablesTooltip": "Questo valore indica se i dati di Outlook possono essere sincronizzati con un dispositivo indossabile. Se si imposta il valore su No, la sincronizzazione con i dispositivi indossabili verrà disabilitata.",
+ "allowSaveContactsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione di sincronizzazione relativa al contatto.",
+ "allowSaveContactsTitle": "Salva i contatti",
+ "allowSaveContactsTooltip": "Il salvataggio dei contatti nella rubrica nativa del dispositivo mobile consente il collegamento di nuove chiamate e SMS con i contatti di Outlook esistenti dell'utente. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
+ "allowSmartReplyTitle": "Risposte suggerite",
+ "allowSmartReplyTooltip": "Quando si apre un messaggio, è possibile che Outlook suggerisca risposte sotto il messaggio. Se si seleziona una risposta suggerita, è possibile modificarla prima dell'invio. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è On.",
+ "allowUserChangeGeneralToolTip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
+ "allowUserChangeTitle": "Consenti all'utente di cambiare impostazione",
+ "blockExternalImagesAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
+ "blockExternalImagesTitle": "Blocca le immagini esterne",
+ "blockExternalImagesTooltip": "Quando il blocco delle immagini esterne è abilitato, l'app impedirà il download di immagini ospitate su Internet incorporate nel corpo del messaggio. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
+ "disableAddinsTitle": "Consenti componenti aggiuntivi",
+ "disableAddinsTooltip": "Per impostazione predefinita, un criterio di protezione delle app consente agli utenti di usare componenti aggiuntivi di terze parti, ma può essere usato per bloccare i componenti aggiuntivi con l'impostazione \"Sincronizza i dati delle app gestite da criteri con app o componenti aggiuntivi nativi\". Se si configura questa impostazione su \"Disattivata\", i componenti aggiuntivi verranno bloccati quando l'impostazione dei criteri di protezione app è impostata su Consentito.",
+ "discoverFeedTitle": "Feed di individuazione",
+ "discoverFeedTooltip": "Il feed di individuazione espone i file di Office a cui si accede più spesso. Per impostazione predefinita, questo feed viene abilitato quando Delve è abilitato per l'utente. Se non si configura questa opzione, l'impostazione predefinita dell'app è On.",
+ "enableSMIMETitle": "Abilita S/MIME",
+ "enableSMIMETooltip": "Specificare se i controlli S/MIME sono abilitati o meno durante la composizione di un messaggio di posta elettronica.",
+ "encryptAllEmails": "Crittografa tutti i messaggi di posta elettronica",
+ "encryptAllEmailsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione Crittografa tutti i messaggi di posta elettronica.",
+ "encryptAllEmailsTooltip": "Specificare se tutti i messaggi di posta elettronica devono essere crittografati. La crittografia consente di convertire i dati in un testo crittografato in modo che possano essere letti solo dal destinatario previsto.",
+ "ldapUrl": "URL LDAP",
+ "ldapUrlTooltip": "Nome host LDAP in cui i client possono ottenere le chiavi di crittografia pubbliche per i destinatari dei messaggi di posta elettronica. I messaggi verranno crittografati quando è disponibile una chiave. Formati supportati: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione.",
+ "nativeCalendarSyncMAMOnlyTitle": "Consenti la sincronizzazione del calendario",
+ "nativeCalendarSyncMAMOnlyTooltip": "Per impostazione predefinita, un criterio di protezione dell'app consente la sincronizzazione del calendario con l'app Calendario nativa, ma può essere usato per bloccare la disponibilità della sincronizzazione del calendario. Questa impostazione funziona in modo indipendente rispetto all'impostazione Criteri di protezione dell'app e consente alle organizzazioni di determinare se la sincronizzazione del calendario è disponibile per l'account aziendale o dell'istituto di istruzione.",
+ "nativeCalendarSyncTitle": "Sincronizza i calendari",
+ "nativeCalendarSyncTooltip": "Per impostazione predefinita, un criterio di protezione app consente la sincronizzazione del calendario con l'app Calendario nativa, ma può essere usato per bloccare la disponibilità della sincronizzazione del calendario con l'impostazione \"Sincronizza i dati dell'app gestita da criteri con app o componenti aggiuntivi nativi\". Se si configura questa impostazione su \"Disattivata\", la sincronizzazione del calendario verrà bloccata quando l'impostazione dei criteri di protezione app è impostata su Consentito.",
+ "playMyEmailsTitle": "Riproduci i messaggi di posta elettronica",
+ "playMyEmailsTooltip": "La funzionalità Riproduci i messaggi di posta elettronica non è abilitata per impostazione predefinita nell'app, ma viene promossa a utenti idonei tramite un banner nella Posta in arrivo. Se questa opzione è impostata su Off, la funzionalità non verrà promossa a utenti idonei nell'app. Gli utenti possono scegliere di abilitare manualmente l'opzione Riproduci i messaggi di posta elettronica dall'app, anche quando questa funzionalità è impostata su Off. Se questa opzione è impostata su Non configurata, l'impostazione predefinita per l'app è On e la funzionalità verrà promossa agli utenti idonei.",
+ "signAllEmails": "Firma tutti i messaggi di posta elettronica",
+ "signAllEmailsAllowUserChangeTooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione Firma tutti i messaggi di posta elettronica.",
+ "signAllEmailsTooltip": "Specificare se tutti i messaggi di posta elettronica devono essere firmati. Una firma digitale verifica l'autenticità del messaggio di posta elettronica e assicura che i contenuti non siano stati manomessi durante il transito.",
+ "syncAddressTitle": "Indirizzo",
+ "syncAddressTooltip": "Questo valore indica se è necessario sincronizzare l'indirizzo del contatto con i contatti nativi.",
+ "syncBirthdayTitle": "Data di nascita",
+ "syncBirthdayTooltip": "Questo valore indica se è necessario sincronizzare la data di nascita del contatto con i contatti nativi.",
+ "syncCompanyTitle": "Società",
+ "syncCompanyTooltip": "Questo valore indica se è necessario sincronizzare la società del contatto con i contatti nativi.",
+ "syncDepartmentTitle": "Reparto",
+ "syncDepartmentTooltip": "Questo valore indica se è necessario sincronizzare il reparto del contatto con i contatti nativi.",
+ "syncEmailAddressTitle": "Indirizzo di posta elettronica",
+ "syncEmailAddressTooltip": "Questo valore indica se è necessario sincronizzare l'indirizzo di posta elettronica del contatto con i contatti nativi.",
+ "syncInstantMessagingAddressTitle": "Indirizzo di messaggistica istantanea",
+ "syncInstantMessagingAddressTooltip": "Questo valore indica se è necessario sincronizzare l'indirizzo di messaggistica istantanea del contatto con i contatti nativi.",
+ "syncJobTitleTitle": "Posizione professionale",
+ "syncJobTitleTooltip": "Questo valore indica se è necessario sincronizzare la posizione del contatto con i contatti nativi.",
+ "syncNicknameTitle": "Soprannome",
+ "syncNicknameTooltip": "Questo valore indica se è necessario sincronizzare il nome alternativo del contatto con i contatti nativi.",
+ "syncNotesTitle": "Notes",
+ "syncNotesTooltip": "Questo valore indica se è necessario sincronizzare le note del contatto con i contatti nativi.",
+ "syncPhoneHomeFaxNumberTitle": "Telefono - Numero di fax personale",
+ "syncPhoneHomeFaxNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di fax personale del contatto con i contatti nativi.",
+ "syncPhoneHomeNumberTitle": "Telefono - Numero personale",
+ "syncPhoneHomeNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di telefono personale del contatto con i contatti nativi.",
+ "syncPhoneMobileNumberTitle": "Telefono - Numero di cellulare",
+ "syncPhoneMobileNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di cellulare del contatto con i contatti nativi.",
+ "syncPhoneOtherNumberTitle": "Telefono - Altro numero",
+ "syncPhoneOtherNumberTooltip": "Questo valore indica se è necessario sincronizzare un altro numero di telefono del contatto con i contatti nativi.",
+ "syncPhonePagerNumberTitle": "Telefono - Numero di cercapersone",
+ "syncPhonePagerNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di cercapersone del contatto con i contatti nativi.",
+ "syncPhoneWorkFaxNumberTitle": "Telefono - Numero di fax aziendale",
+ "syncPhoneWorkFaxNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di fax aziendale del contatto con i contatti nativi.",
+ "syncPhoneWorkNumberTitle": "Telefono - Numero aziendale",
+ "syncPhoneWorkNumberTooltip": "Questo valore indica se è necessario sincronizzare il numero di telefono aziendale del contatto con i contatti nativi.",
+ "syncPrefixTitle": "Prefisso del nome",
+ "syncPrefixTooltip": "Questo valore indica se è necessario sincronizzare il prefisso del nome del contatto con i contatti nativi.",
+ "syncSuffixTitle": "Suffisso del nome",
+ "syncSuffixTooltip": "Questo valore indica se è necessario sincronizzare il suffisso del nome del contatto con i contatti nativi.",
+ "textPredictionsTitle": "Completamenti del testo",
+ "textPredictionsTooltip": "Outlook può suggerire parole e frasi durante la composizione di messaggi. Quando Outlook offre un suggerimento, scorrere rapidamente per accettarlo. Quando questa opzione è impostata su Non configurato, l'impostazione predefinita dell'app sarà impostata su On.",
+ "themesEnabledTitle": "Temi abilitati",
+ "themesEnabledTooltip": "Specificare se l'utente è autorizzato a usare un tema visivo personalizzato."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Usare queste impostazioni per rimanere aggiornati su quali utenti installano app non approvate per l'uso nell'azienda. Selezionare il tipo di elenco di app con restrizioni:
\r\n App non consentite: elenco di app per cui si vogliono ricevere informazioni in caso di installazione da parte degli utenti. \r\n App approvate: elenco di app approvate per l'uso nell'azienda. Si verrà informati quando gli utenti installano un'app non inclusa in questo elenco. \r\n ",
+ "androidZebraMxZebraMx": "Consente di configurare i dispositivi Zebra caricando un profilo MX in formato XML.",
+ "iosDeviceFeaturesAirprint": "Usare queste impostazioni per configurare i dispositivi iOS in modo che si connettano automaticamente a stampanti compatibili con AirPrint in rete. Saranno necessari l'indirizzo IP e il percorso delle risorse delle stampanti.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Consente di configurare un'estensione dell'app che abilita l'accesso Single Sign-On per dispositivi che eseguono iOS 13.0 o versioni successive.",
+ "iosDeviceFeaturesHomeScreenLayout": "Configurare il layout per le schermate di ancoraggio e iniziali nei dispositivi iOS. È possibile che per alcuni dispositivi siano previsti limiti relativi al numero di elementi visualizzabili.",
+ "iosDeviceFeaturesIOSWallpaper": "Consente di visualizzare un'immagine che verrà mostrata nella schermata iniziale e/o nella schermata di blocco dei dispositivi iOS.\r\n Per visualizzare un'immagine univoca in ogni posizione, creare un profilo con l'immagine della schermata di blocco e un profilo con l'immagine della schermata iniziale.\r\n Assegnare quindi entrambi i profili agli utenti.\r\n \r\n
\r\n
Dimensioni massime file: 750 KB
\r\n
Tipo di file: PNG, JPG o JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Specificare le impostazioni di notifica per le app. Supporta iOS 9.3 e versioni successive.",
+ "iosDeviceFeaturesSharedDevice": "Consente di specificare il testo facoltativo visualizzato nella schermata di blocco. Questa opzione è supportata in iOS 9.3 e versioni successive. Altre informazioni",
+ "iosGeneralApplicationRestrictions": "Usare queste impostazioni per rimanere aggiornati su quali utenti installano app non approvate per l'uso nell'azienda. Selezionare il tipo di elenco di app con restrizioni:
\r\n App non consentite: elenco di app per cui si vogliono ricevere informazioni in caso di installazione da parte degli utenti. \r\n App approvate: elenco di app approvate per l'uso nell'azienda. Si verrà informati quando gli utenti installano un'app non inclusa in questo elenco. \r\n ",
+ "iosGeneralApplicationVisibility": "Usare l'elenco di app visibili per specificare le app iOS che un utente è autorizzato a visualizzare o avviare. Usare l'elenco di app nascoste per specificare le app iOS che un utente non è autorizzato a visualizzare o avviare.",
+ "iosGeneralAutonomousSingleAppMode": "Le app aggiunte a questo elenco e assegnate a un dispositivo possono bloccare il dispositivo, in modo che esegua solo l'app specifica dopo l'avvio oppure bloccarlo mentre è in esecuzione un'azione specifica, ad esempio un test. Al termine dell'azione o dopo la rimozione della restrizione, viene ripristinato lo stato normale del dispositivo.",
+ "iosGeneralKiosk": "La modalità tutto schermo blocca diverse impostazioni in un dispositivo oppure specifica una singola app che può essere eseguita in un dispositivo. Questa opzione può essere utile in ambienti quali un punto vendita al dettaglio in cui si vuole che il dispositivo esegua solo una singola app demo.",
+ "macDeviceFeaturesAirprint": "Usare queste impostazioni per configurare i dispositivi macOS per connettersi automaticamente alle stampanti compatibili con AirPrint disponibili nella rete. Sarà necessario specificare l'indirizzo IP e il percorso delle risorse delle stampanti.",
+ "macDeviceFeaturesAssociatedDomains": "È possibile configurare i domini associati per la condivisione di dati e credenziali di accesso tra le app e i siti Web dell'organizzazione. Questo profilo può essere applicato a dispositivi che eseguono macOS 10.15 o versioni successive.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Consente di configurare un'estensione dell'app che abilita l'accesso Single Sign-On per dispositivi che eseguono macOS 10.15 o versioni successive.",
+ "macDeviceFeaturesLoginItems": "Scegliere le app, i file e le cartelle da aprire quando gli utenti accedono ai propri dispositivi. Se non si vuole che gli utenti modifichino la modalità di apertura delle app selezionate, è possibile nascondere le app dalla configurazione utente.",
+ "macDeviceFeaturesLoginWindow": "È possibile configurare l'aspetto della schermata di accesso di macOS e le funzioni disponibili per gli utenti prima e dopo l'accesso.",
+ "macExtensionsKernelExtensions": "Usare queste impostazioni per configurare i criteri di estensione del kernel in dispositivi macOS che eseguono la versione 10.13.2 o successiva.",
+ "macGeneralDomains": "I messaggi di posta elettronica inviati o ricevuti dall'utente che non corrispondono ai domini specificati qui verranno contrassegnati come non attendibili.",
+ "windows10EndpointProtectionApplicationGuard": "Quando si usa Microsoft Edge, Microsoft Defender Application Guard protegge l'ambiente dai siti non definiti come attendibili dall'organizzazione. Quando gli utenti visitano siti non elencati nei limiti della rete isolata, tali siti verranno aperti in una sessione del browser virtuale in Hyper-V. I siti attendibili vengono definiti da un limite di rete, che può essere configurato in Configurazioni dei dispositivi. Si noti che questa funzionalità è disponibile solo per i dispositivi Windows 10 a 64 bit o versioni successive.",
+ "windows10EndpointProtectionCredentialGuard": "L'abilitazione di Credential Guard abiliterà le impostazioni necessarie seguenti:\r\n \r\n
\r\n
Abilita la sicurezza basata su virtualizzazione: attiva la sicurezza basata su virtualizzazione al riavvio successivo. La sicurezza basata su virtualizzazione usa Windows Hypervisor per offrire il supporto per i servizi di sicurezza.
\r\n \r\n
Avvio protetto con accesso diretto alla memoria: attiva la sicurezza basata su virtualizzazione con l'avvio protetto e l'accesso diretto alla memoria.
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Scegliere altre app che devono essere controllate o possono essere ritenute attendibili per l'esecuzione da parte di Controllo di applicazioni di Microsoft Defender. I componenti Windows e tutte le app di Windows Store sono ritenuti automaticamente attendibili per l'esecuzione.
\r\n Le applicazioni non verranno bloccate se sono in esecuzione in modalità \"Solo controllo\". La modalità \"Solo controllo\" registra tutti gli eventi nei log locali dei client.\r\n",
+ "windows10GeneralPrivacyPerApp": "Aggiungere le app che devono avere un comportamento diverso a livello di privacy rispetto a quanto definito in \"Privacy predefinita\".",
+ "windows10NetworkBoundaryNetworkBoundary": "Il limite di rete è l'elenco di risorse aziendali, ad esempio il dominio ospitato sul cloud e gli intervalli di indirizzi IP per i computer inclusi nella rete aziendale. Definire i limiti di rete per applicare criteri per la protezione dei dati disponibili in tali posizioni.",
+ "windowsHealthMonitoring": "Configurare i criteri di monitoraggio dello stato di Windows.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone può impedire agli utenti di installare o avviare le app specificate nell'elenco di app non consentite oppure le app non specificate nell'elenco di app approvate. Tutte le app gestite devono essere aggiunte all'elenco di app approvate."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Interrompi solo le app di blocco selezionate nella fase tecnico",
+ "apps": "app",
+ "appsListName": "Elenco applicazioni",
+ "blockingApps": "Blocco delle app",
+ "managedApps": "App gestite",
+ "noApps": "Nessuna applicazione",
+ "noAppsError": "Si è verificato un errore durante il recupero delle applicazioni",
+ "selectApps": "Selezionare le app",
+ "selectedAppsCount": "{0} app selezionate (al massimo 100)",
+ "useSelectedAppsAll": "Tutto",
+ "useSelectedAppsSelected": "Selezionato",
+ "useSelectedAppsToggleLabel": "Blocca l'uso del dispositivo fino all'installazione delle app necessarie in caso di assegnazione a un utente/dispositivo"
+ },
+ "Header": {
+ "application": "Applicazione",
+ "publisher": "Editore",
+ "version": "Versione"
+ },
+ "SearchBox": {
+ "ariaLabel": "Cerca app",
+ "placeHolder": "Cerca per nome o autore"
+ },
+ "allowToUseToggle": "Consenti agli utenti di usare il dispositivo se si verifica un errore di installazione",
+ "blockToggle": "Impedisci l'uso del dispositivo fino al completamento dell'installazione di tutte le app e di tutti i profili",
+ "blockToolTip": "Se, ad esempio, si aggiunge Microsoft Word a questo elenco, utenti e dispositivi di destinazione non potranno uscire dalla pagina di stato della registrazione finché l'installazione di Word non viene completata.",
+ "collectLogToggle": "Attiva la raccolta di log e la pagina di diagnostica per gli utenti finali",
+ "create": "Creazione profilo",
+ "customMessageTextBox": "Messaggio di errore",
+ "customMessageToggle": "Mostrare un messaggio personalizzato in caso di raggiungimento del limite di tempo o se si verifica un errore",
+ "enableForAutopilotOnlyToggle": "Mostra la pagina solo ai dispositivi sottoposti a provisioning dalla Configurazione guidata",
+ "installQualityUpdatesToggle": "Installare gli aggiornamenti di qualità di Windows (potrebbe riavviare il dispositivo) (anteprima)",
+ "progressToggle": "Mostra lo stato della configurazione di app e profili",
+ "resetToggle": "Consenti agli utenti di reimpostare il dispositivo se si verifica un errore di installazione",
+ "timeout": "Mostra un errore se l'installazione richiede più tempo rispetto al numero di minuti specificato"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Proprietà",
+ "rule": "Regola",
+ "ruleDetails": "Dettagli regola",
+ "value": "Valore"
+ },
+ "assignIf": "Assegna un profilo se",
+ "deleteWarning": "La regola di applicabilità selezionata verrà eliminata",
+ "dontAssignIf": "Non assegnare un profilo se",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "e {0} in più",
+ "instructions": "Specificare la modalità di applicazione del profilo in un gruppo assegnato. Intune applicherà il profilo solo ai dispositivi che rispettano i criteri combinati di queste regole.",
+ "maxText": "Max",
+ "minText": "Min",
+ "noActionRow": "Non sono state specificate regole di applicabilità",
+ "oSVersion": "Ad esempio, 1.2.3.4",
+ "toText": "al",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home - Cina",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "Edizione del sistema operativo",
+ "windows10OsVersion": "Versione del sistema operativo",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Consenti all'utente di cambiare impostazione",
+ "tooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione."
+ },
+ "AllowWorkAccounts": {
+ "title": "Consenti solo account aziendali o dell'istituto di istruzione",
+ "tooltip": " Se si abilita questa impostazione, gli utenti non potranno aggiungere account di posta elettronica personali e account di archiviazione in Outlook. Se l'utente aggiunge un account personale a Outlook, verrà richiesta la rimozione dell'account personale. Se l'utente non rimuove l'account personale, non sarà possibile aggiungere l'account aziendale o dell'istituto di istruzione."
+ },
+ "BlockExternalImages": {
+ "title": "Blocca le immagini esterne",
+ "tooltip": "Quando il blocco delle immagini esterne è abilitato, l'app impedirà il download di immagini ospitate su Internet incorporate nel corpo del messaggio. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off"
+ },
+ "ConfigureEmail": {
+ "title": "Configura le impostazioni dell'account di posta elettronica"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "L'opzione Firma dell'app predefinita indica se l'app userà \"Ottieni Outlook per Android\" come firma predefinita durante la composizione del messaggio. Se l'impostazione è configurata come Off, la firma predefinita non verrà usata. Gli utenti possono tuttavia aggiungere la propria firma.\r\n\r\nSe l'opzione è impostata su Non configurata, l'impostazione predefinita dell'app è On.",
+ "iOS": "L'opzione Firma dell'app predefinita indica se l'app userà \"Ottieni Outlook per iOS\" come firma predefinita durante la composizione del messaggio. Se l'impostazione è configurata come Off, la firma predefinita non verrà usata. Gli utenti possono tuttavia aggiungere la propria firma.\r\n\r\nSe l'opzione è impostata su Non configurata, l'impostazione predefinita dell'app è On."
+ },
+ "title": "Firma dell'app predefinita"
+ },
+ "OfficeFeedReplies": {
+ "title": "Feed di individuazione",
+ "tooltip": "Il feed di individuazione espone i file di Office a cui si accede più spesso. Per impostazione predefinita, questo feed viene abilitato quando Delve è abilitato per l'utente. Se non si configura questa opzione, l'impostazione predefinita dell'app è On."
+ },
+ "OrganizeMailByThread": {
+ "title": "Organizza i messaggi in base al thread",
+ "tooltip": "Il comportamento predefinito in Outlook prevede l'aggregazione delle conversazioni tramite posta elettronica in una visualizzazione di conversazioni in thread. Se questa impostazione è disabilitata, Outlook visualizzerà ogni messaggio individualmente e non raggrupperà i messaggi in base al thread."
+ },
+ "PlayMyEmails": {
+ "title": "Riproduci i messaggi di posta elettronica",
+ "tooltip": "La funzionalità Riproduci i messaggi di posta elettronica non è abilitata per impostazione predefinita nell'app, ma viene promossa a utenti idonei tramite un banner nella Posta in arrivo. Se questa opzione è impostata su Off, la funzionalità non verrà promossa a utenti idonei nell'app. Gli utenti possono scegliere di abilitare manualmente l'opzione Riproduci i messaggi di posta elettronica dall'app, anche quando questa funzionalità è impostata su Off. Se questa opzione è impostata su Non configurata, l'impostazione predefinita per l'app è On e la funzionalità verrà promossa agli utenti idonei."
+ },
+ "SuggestedReplies": {
+ "title": "Risposte suggerite",
+ "tooltip": "Quando si apre un messaggio, è possibile che Outlook suggerisca risposte sotto il messaggio. Se si seleziona una risposta suggerita, è possibile modificarla prima dell'invio."
+ },
+ "SyncCalendars": {
+ "title": "Sincronizza i calendari",
+ "tooltip": "Determinare se gli utenti possono sincronizzare il calendario di Outlook con l'app e il database del calendario nativo."
+ },
+ "TextPredictions": {
+ "title": "Completamenti del testo",
+ "tooltip": "Outlook può suggerire parole e frasi durante la composizione di messaggi. Quando Outlook offre un suggerimento, scorrere rapidamente per accettarlo. Quando questa opzione è impostata su Non configurato, l'impostazione predefinita dell'app sarà impostata su On."
+ },
+ "ThemesEnabled": {
+ "title": "Temi abilitati",
+ "tooltip": "Specificare se l'utente è autorizzato a usare un tema visivo personalizzato."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "Dispositivi Chrome OS"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Contatti amministratore",
+ "appPackaging": "Pacchetti dell'app",
+ "autopatchGroups": "Gruppi di patch automatiche",
+ "devices": "Dispositivi",
+ "featureEnablement": "Attivazione funzionalità",
+ "feedback": "Feedback",
+ "gettingStarted": "Riquadro attività iniziale",
+ "messages": "Messaggi",
+ "onlineResources": "Risorse in linea",
+ "policyHealth": "Integrità criteri",
+ "policyHealthPreview": "Integrità dei criteri (anteprima)",
+ "releaseManagement": "Release Management",
+ "serviceRequests": "Richieste del servizio",
+ "settings": "Impostazioni",
+ "supportRequests": "Richieste di supporto",
+ "tenantEnrollment": "Registrazione del tenant",
+ "tenantManagement": "Gestione tenant"
+ },
+ "actions": "Azioni per la non conformità",
+ "advancedExchangeSettings": "Impostazioni di Exchange Online",
+ "advancedThreatProtection": "Microsoft Defender per endpoint",
+ "allApps": "Tutte le app",
+ "allDevices": "Tutti i dispositivi",
+ "androidFotaDeployments": "Distribuzioni Android FOTA",
+ "appBundles": "Bundle dell'app",
+ "appCategories": "Categorie di app",
+ "appConfigPolicies": "Criteri di configurazione dell'app",
+ "appConfigurationStatus": "Stato di configurazione delle app",
+ "appInstallStatus": "Stato di installazione dell'app",
+ "appLicences": "Licenze dell'app",
+ "appProtectionPolicies": "Criteri di protezione delle app",
+ "appProtectionStatus": "Stato di protezione delle app",
+ "appSelectiveWipe": "Cancellazione selettiva di app",
+ "appleVppTokens": "Token VPP Apple",
+ "apps": "App",
+ "assign": "Assegnazioni",
+ "assignedPermissions": "Autorizzazioni assegnate",
+ "assignedRoles": "Ruoli assegnati",
+ "autopilotDeploymentReport": "Distribuzioni di Autopilot (anteprima)",
+ "autopilotDeploymentReportV2": "Distribuzioni Autopilot 2.0 (anteprima)",
+ "brandingAndCustomization": "Personalizzazione",
+ "cartProfiles": "Profili del carrello",
+ "certificateConnectors": "Connettori di certificati",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Dispositivi collegati al cloud (anteprima)",
+ "cloudPcActions": "Azioni di Cloud PC (anteprima)",
+ "cloudPcMaintenanceWindows": "Finestre di manutenzione di Cloud PC (anteprima)",
+ "compliancePolicies": "Criteri di conformità",
+ "complianceScriptManagement": "Script",
+ "complianceScriptManagementPreview": "Script (anteprima)",
+ "complianceSettings": "Impostazioni dei criteri di conformità",
+ "conditionStatements": "Dichiarazioni sulle condizioni",
+ "conditions": "Percorsi",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Profili di configurazione",
+ "configurationScripts": "Script di configurazione",
+ "connectorsAndTokens": "Connettori e token",
+ "corporateDeviceIdentifiers": "Identificatori dei dispositivi aziendali",
+ "customAttributes": "Attributi personalizzati",
+ "customAttributesMacOS": "Attributi personalizzati per macOS",
+ "customNotifications": "Notifiche personalizzate",
+ "deploymentSettings": "Impostazioni di distribuzione",
+ "derivedCredentials": "Credenziali derivate",
+ "deviceActions": "Azioni del dispositivo",
+ "deviceCategories": "Categorie di dispositivi",
+ "deviceCleanUp": "Regole per la pulizia del dispositivo",
+ "deviceEnrollmentManagers": "Manager di registrazione dispositivi",
+ "deviceExecutionStatus": "Stato del dispositivo",
+ "deviceLimitEnrollmentRestrictions": "Restrizioni sui limiti di registrazione di dispositivi",
+ "deviceTypeEnrollmentRestrictions": "Restrizioni della piattaforma del dispositivo di registrazione",
+ "devices": "Dispositivi",
+ "discoveredApps": "App individuate",
+ "edgePolicies": "Criteri per Microsoft Edge",
+ "embeddedSIM": "Profili cellulare eSIM (anteprima)",
+ "enrollDevices": "Registra i dispositivi",
+ "enrollmentFailures": "Errori di registrazione",
+ "enrollmentNotifications": "Notifiche di registrazione (anteprima)",
+ "enrollmentRestrictions": "Restrizioni registrazione",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Connettori di servizi Exchange",
+ "failuresForCumulativeQualityUpdates": "Errori di aggiornamento qualitativo cumulativo di Windows",
+ "failuresForDriverUpdates": "Errori di aggiornamento del driver Windows",
+ "failuresForFeatureUpdates": "Errori di aggiornamento delle funzionalità",
+ "failuresForQualityUpdates": "Errori di aggiornamento urgente di Windows",
+ "featureFlighting": "Distribuzione di versioni di anteprima delle funzionalità",
+ "featureUpdateDeployments": "Aggiornamenti delle funzionalità per Windows 10 e versioni successive",
+ "flighting": "Distribuzione di versioni di anteprima",
+ "fotaUpdate": "Aggiornamento firmware in modalità over-the-air",
+ "groupPolicy": "Modelli amministrativi",
+ "groupPolicyAnalytics": "Analisi dei criteri di gruppo",
+ "helpSupport": "Guida e supporto tecnico",
+ "helpSupportReplacement": "Guida e supporto tecnico ({0})",
+ "iOSAppProvisioning": "Profili di provisioning delle app iOS",
+ "incompleteUserEnrollments": "Registrazioni utente incomplete",
+ "iosUpdates": "aggiornamenti per iOS/iPadOS",
+ "legacyPcManagement": "Gestione dei computer legacy",
+ "macOSSoftwareUpdate": "aggiornamenti di MacOS",
+ "macOSSoftwareUpdateAccountSummaries": "Stato dell'installazione per dispositivi macOS",
+ "macOSSoftwareUpdateCategorySummaries": "Riepilogo degli aggiornamenti software",
+ "macOSSoftwareUpdateStateSummaries": "aggiornamenti",
+ "managedGooglePlay": "Google Play gestito",
+ "msfb": "Microsoft Store per le aziende",
+ "myPermissions": "Autorizzazioni personali",
+ "notifications": "Notifiche",
+ "officeApps": "App di Office",
+ "officeProPlusPolicies": "Criteri per le app di Office",
+ "onPremise": "Locale",
+ "onPremisesConnector": "Connettore locale per Exchange ActiveSync",
+ "onPremisesDeviceAccess": "Dispositivi di Exchange ActiveSync",
+ "onPremisesManageAccess": "Accesso locale a Exchange",
+ "outOfDateIosDevices": "Errori di installazione per dispositivi iOS",
+ "overview": "Panoramica",
+ "partnerDeviceManagement": "Gestione dei dispositivi partner",
+ "perUpdateRingDeploymentState": "Stato di distribuzione per ogni anello di aggiornamento",
+ "permissions": "Autorizzazioni",
+ "platformApps": "{0} app",
+ "platformDevices": "{0} dispositivi",
+ "platformEnrollment": "{0} registrazione",
+ "policies": "Criteri",
+ "profiles": "Profili",
+ "properties": "Proprietà",
+ "reports": "Report",
+ "retireNoncompliantDevices": "Disattiva i dispositivi non conformi",
+ "retireNoncompliantDevicesPreview": "Disattiva i dispositivi non conformi (anteprima)",
+ "role": "Ruolo",
+ "scriptManagement": "Script",
+ "securityBaselines": "Baseline di sicurezza",
+ "serviceToServiceConnector": "Exchange Online Connector",
+ "servicenowConnector": "Connettore ServiceNow",
+ "shellScripts": "Script della shell",
+ "teamViewerConnector": "Connettore TeamViewer",
+ "telecomeExpenseManagement": "Gestione delle spese per telecomunicazioni",
+ "tenantAdmin": "Amministratore del tenant",
+ "tenantAdministration": "Amministrazione del tenant",
+ "termsAndConditions": "Condizioni",
+ "titles": "Titoli",
+ "troubleshoot": "Risoluzione dei problemi",
+ "troubleshootSupport": "Risoluzione dei problemi e supporto tecnico",
+ "user": "Utente",
+ "userExecutionStatus": "Stato dell'utente",
+ "wdacSupplementalPolicies": "Criteri supplementari per la modalità S",
+ "win32CatalogUpdateApp": "Aggiornamenti per le app di Gestione app Enterprise",
+ "win32CatalogUpdateAppInPreview": "Aggiornamenti (anteprima) per le app del catalogo di Windows (Win32)",
+ "win32CatalogUpdateAppPreviewTitle": "App di Catalogo app aziendali con aggiornamenti (anteprima)",
+ "win32CatalogUpdateAppTitle": "App di Catalogo app aziendali con aggiornamenti",
+ "windows10DriverUpdate": "Aggiornamenti del driver per Windows 10 e versioni successive",
+ "windows10QualityUpdate": "Aggiornamenti qualitativi per Windows 10 e versioni successive",
+ "windows10UpdateRings": "Anelli di aggiornamento per Windows 10 e versioni successive",
+ "windows10XPolicyFailures": "Errori dei criteri di Windows 10X",
+ "windows365PartnerConnector": "Connettori partner di Windows 365",
+ "windowsDiagnosticData": "Dati di Windows",
+ "windowsEnterpriseCertificate": "Certificato Windows Enterprise",
+ "windowsManagement": "Script",
+ "windowsSideLoadingKeys": "Chiavi di sideload Windows",
+ "windowsSymantecCertificate": "Certificato DigiCert Windows",
+ "windowsThreatReport": "Stato dell'agente delle minacce"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Consenti agli utenti di aprire dati dai servizi selezionati",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Selezionare il numero di valori precedenti del PIN da conservare"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "È necessaria un'azione di blocco per tutti i criteri di conformità.",
- "graceperiod": "Pianifica (giorni dopo la non conformità)",
- "graceperiodInfo": "Specificare il numero di giorni di non conformità dopo i quali è necessario attivare questa azione per il dispositivo dell'utente",
- "subtitle": "Specificare i parametri dell'azione",
- "title": "Parametri dell'azione"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Rendere disponibile agli utenti come aggiornamento facoltativo",
+ "optionalValue": "Facoltativo",
+ "required": "Rendere disponibile agli utenti come aggiornamento necessario",
+ "requiredValue": "Obbligatorio"
},
- "List": {
- "gracePeriodDay": "{0} giorno dopo la non conformità",
- "gracePeriodDays": "{0} giorni dopo la non conformità",
- "gracePeriodHour": "{0} ora dopo la non conformità",
- "gracePeriodHours": "{0} ore dopo la non conformità",
- "gracePeriodMinute": "{0} minuto dopo la non conformità",
- "gracePeriodMinutes": "{0} minuti dopo la non conformità",
- "immediately": "Immediatamente",
- "schedule": "Pianifica",
- "scheduleInfoBalloon": "Giorni dopo la non conformità",
- "subtitle": "Specificare la sequenza di azioni nei dispositivi non conformi",
- "title": "Azioni"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "App del sistema Android Enterprise",
+ "androidForWorkApp": "App di Google Play Store gestito",
+ "androidLobApp": "App line-of-business Android",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "App Android predefinita",
+ "builtInApp": "App predefinita",
+ "builtInIos": "App iOS predefinita",
+ "default": "",
+ "iosIPadOSWebClip": "Clip Web iOS/iPadOS",
+ "iosLobApp": "App line-of-business iOS",
+ "iosStoreApp": "App Store iOS",
+ "iosVppApp": "App Volume Purchase Program iOS",
+ "lineOfBusinessApp": "App line-of-business",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "App line-of-business macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "App di Microsoft 365 (macOS)",
+ "macOSPkgApp": "App macOS (PKG)",
+ "macOSWebClip": "Clip Web macOS",
+ "macOsVppApp": "App Volume Purchase Program macOS",
+ "managedAndroidLobApp": "App line-of-business Android gestita",
+ "managedAndroidStoreApp": "App di Android Store gestita",
+ "managedGooglePlayApp": "App di Google Play Store gestito",
+ "managedGooglePlayPrivateApp": "App privata di Google Play gestito",
+ "managedGooglePlayWebApp": "Collegamento Web di Google Play gestito",
+ "managedIosLobApp": "App line-of-business iOS gestita",
+ "managedIosStoreApp": "App dello Store iOS gestita",
+ "microsoftStoreForBusinessApp": "App di Microsoft Store per le aziende",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store per le aziende",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 e versioni successive)",
+ "webApp": "Collegamento Web",
+ "windowsAppXLobApp": "App line-of-business AppX per Windows",
+ "windowsClassicApp": "App Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 e versioni successive)",
+ "windowsMobileMsiLobApp": "App line-of-business di Windows MSI",
+ "windowsPhone81AppXBundleLobApp": "App line-of-business AppX per Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "App line-of-business AppX per Windows Phone 8.1",
+ "windowsPhone81StoreApp": "App dello Store per Windows Phone 8.1",
+ "windowsPhoneXapLobApp": "App line-of-business XAP per Windows Phone",
+ "windowsStoreApp": "App Microsoft Store (legacy)",
+ "windowsUniversalAppXLobApp": "App line-of-business AppX universale per Windows",
+ "windowsUniversalLobApp": "App line-of-business universale di Windows",
+ "windowsWebApp": "Link Web Windows"
+ },
+ "PolicySet": {
+ "appManagement": "Gestione applicazioni",
+ "assignments": "Assegnazioni",
+ "basics": "Informazioni di base",
+ "deviceEnrollment": "Registrazione del dispositivo",
+ "deviceManagement": "Gestione dei dispositivi",
+ "scopeTags": "Tag di ambito",
+ "appConfigurationTitle": "Criteri di configurazione dell'app",
+ "appProtectionTitle": "Criteri di protezione delle app",
+ "appTitle": "App",
+ "iOSAppProvisioningTitle": "Profili di provisioning delle app iOS",
+ "deviceLimitRestrictionTitle": "Restrizioni sul limite di dispositivi",
+ "deviceTypeRestrictionTitle": "Restrizioni dei tipi di dispositivo",
+ "enrollmentStatusSettingTitle": "Pagine di stato della registrazione",
+ "windowsAutopilotDeploymentProfileTitle": "Profili di distribuzione di Windows Autopilot",
+ "deviceComplianceTitle": "Criteri di conformità del dispositivo",
+ "deviceConfigurationTitle": "Profili di configurazione del dispositivo",
+ "powershellScriptTitle": "Script di PowerShell"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "L'installazione dell'app può forzare il riavvio del dispositivo",
+ "basedOnReturnCode": "Determinare il comportamento in base ai codici restituiti",
+ "force": "Intune forzerà il riavvio obbligatorio del dispositivo",
+ "suppress": "Nessuna azione specifica"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Tempo di installazione richiesto (minuti)",
+ "maxRunTimeInMinutesToolTip": "Numero di minuti di attesa del programma di installazione da parte del sistema. Il valore predefinito è 60 minuti."
+ },
+ "RunAsAccountOptions": {
+ "system": "Sistema",
+ "user": "Utente"
+ },
+ "availableUninstall": "Consenti disinstallazione disponibile",
+ "availableUninstallTooltip": "Selezionare 'Sì' per specificare l'opzione di disinstallazione per questa app per gli utenti dal Portale aziendale. Selezionare 'No' per impedire agli utenti di disinstallare l'app dal Portale aziendale.",
+ "bladeTitle": "Programma",
+ "deviceRestartBehavior": "Comportamento riavvio dispositivo",
+ "deviceRestartBehaviorTooltip": "Selezionare il comportamento di riavvio del dispositivo dopo la corretta installazione dell'app. Selezionare 'Determina il comportamento in base ai codici restituiti' per riavviare il dispositivo in base alle impostazioni di configurazione dei codici restituiti. Selezionare 'Nessuna azione specifica' per eliminare i riavvii del dispositivo durante l'installazione dell'app per le app basate su MSI. Selezionare 'L'installazione dell'app può forzare il riavvio del dispositivo' per consentire il completamento dell'installazione dell'app senza eliminare i riavvii. Selezionare 'Intune forzerà il riavvio obbligatorio del dispositivo' per riavviare sempre il dispositivo dopo la corretta installazione dell'app.",
+ "header": "Specificare i comandi per l'installazione e la disinstallazione di questa app:",
+ "installCommand": "Comando di installazione",
+ "installCommandMaxLengthErrorMessage": "Il comando di installazione non può superare la lunghezza massima consentita di 1024 caratteri.",
+ "installCommandTooltip": "Riga di comando di installazione completa usata per installare questa app.",
+ "runAs32Bit": "Esegui i comandi di installazione e disinstallazione in un processo a 32 bit nei client a 64 bit",
+ "runAs32BitTooltip": "Selezionare 'Sì' per installare e disinstallare l'app in un processo a 32 bit nei client a 64 bit. Selezionare 'No' (impostazione predefinita) per installare e disinstallare l'app in un processo a 64 bit nei client a 64 bit. I client a 32 bit useranno sempre un processo a 32 bit.",
+ "runAsAccount": "Comportamento di installazione",
+ "runAsAccountTooltip": "Selezionare 'Sistema' per installare l'app per tutti gli utenti, se questa opzione è supportata. Selezionare 'Utente' per installare l'app per l'utente connesso al dispositivo. Per le app MSI con doppio scopo, le modifiche impediranno il completamento di aggiornamenti e disinstallazioni fino al ripristino del valore applicato al dispositivo al momento dell'installazione originale.",
+ "selectorLabel": "Programma",
+ "uninstallCommand": "Comando di disinstallazione",
+ "uninstallCommandTooltip": "Riga di comando di disinstallazione completa usata per disinstallare questa app."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Altri",
- "additionalRecipients": "Altri destinatari (tramite posta elettronica)",
- "additionalRecipientsBladeTitle": "Selezionare destinatari aggiuntivi",
- "emailAddressPrompt": "Immettere gli indirizzi di posta elettronica (separati da virgole)",
- "invalidEmail": "L'indirizzo di posta elettronica non è valido",
- "messageTemplate": "Modello di messaggio",
- "noneSelected": "Nessuna selezione",
- "notSelected": "Non selezionato",
- "numSelected": "{0} selezionati",
- "selected": "Selezionata"
- },
- "block": "Contrassegna il dispositivo come non conforme",
- "lockDevice": "Blocca il dispositivo (azione locale)",
- "lockDeviceWithPasscode": "Blocca il dispositivo (azione locale)",
- "noAction": "Nessuna azione",
- "noActionRow": "Nessuna azione, selezionare 'Aggiungi' per aggiungere un'azione",
- "pushNotification": "Invia una notifica push all'utente finale",
- "remoteLock": "Blocca in remoto il dispositivo non conforme",
- "removeSourceAccessProfile": "Rimuovi il profilo di accesso di origine",
- "retire": "Aggiungere dispositivo all'elenco di ritiro",
- "wipe": "Cancella",
- "emailNotification": "Invia un messaggio di posta elettronica all'utente finale"
- },
- "InstallIntent": {
- "available": "Disponibile per i dispositivi registrati",
- "availableWithoutEnrollment": "Disponibile con o senza registrazione",
- "required": "Obbligatorio",
- "uninstall": "Disinstalla"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Crea uno script personalizzato",
- "edit": "Modifica lo script personalizzato"
- },
- "basicInfo": "È possibile creare un nuovo pacchetto di script personalizzato dagli script di rilevamento e correzione scritti dall'utente.",
- "customScriptCapitalized": "Script personalizzato",
- "customScriptLowercase": "script personalizzato",
- "detectionScript": "Script di rilevamento"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Consenti l'uso di lettere minuscole nel PIN",
+ "notAllow": "Non consentire l'uso di lettere minuscole nel PIN",
+ "requireAtLeastOne": "Richiedi l'uso di almeno una lettera minuscola nel PIN"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Consenti l'uso di caratteri speciali nel PIN",
+ "notAllow": "Non consentire l'uso di caratteri speciali nel PIN",
+ "requireAtLeastOne": "Richiedi l'uso di almeno un carattere speciale nel PIN"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Consenti l'uso di lettere maiuscole nel PIN",
+ "notAllow": "Non consentire l'uso di lettere maiuscole nel PIN",
+ "requireAtLeastOne": "Richiedi l'uso di almeno una lettera maiuscola nel PIN"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Crea nuovo",
+ "createNewResourceAccountInfo": "
\r\nÈ possibile creare un nuovo account della risorsa durante la registrazione. L'account della risorsa verrà aggiunto immediatamente alla tabella Account della risorsa, ma sarà attivo solo dopo la registrazione del dispositivo e la verifica della sottoscrizione di Surface Hub. Altre informazioni sugli account della risorsa
\r\n ",
+ "createNewResourceTitle": "Crea un nuovo account della risorsa",
+ "deviceNameInvalid": "Il formato del nome dispositivo non è valido",
+ "deviceNameRequired": "Il nome del dispositivo è obbligatorio",
+ "editResourceAccountLabel": "Modifica",
+ "selectExistingCommandMenu": "Seleziona esistente"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "I nomi possono contenere al massimo 15 caratteri e possono includere lettere (a-z, A-Z), numeri (0-9) e trattini. I nomi non devono contenere solo numeri. I nomi non possono includere uno spazio vuoto."
+ },
+ "Header": {
+ "addressableUserName": "Nome descrittivo dell'utente",
+ "azureADDevice": "Dispositivo Microsoft Entra associato",
+ "batch": "Tag di gruppo",
+ "dateAssigned": "Data di assegnazione",
+ "deviceAccountPwd": "Password dell'account del dispositivo",
+ "deviceAccountUpn": "Account del dispositivo",
+ "deviceDisplayName": "Nome del dispositivo",
+ "deviceFriendlyName": "Soprannome del dispositivo",
+ "deviceName": "Nome del dispositivo",
+ "deviceUseType": "Tipo di uso del dispositivo",
+ "enrollmentState": "Stato della registrazione",
+ "intuneDevice": "Dispositivo di Intune associato",
+ "lastContacted": "Ultimo contatto",
+ "make": "Produttore",
+ "model": "Modello",
+ "profile": "Profilo assegnato",
+ "profileStatus": "Stato del profilo",
+ "purchaseOrderId": "Ordine d'acquisto",
+ "resourceAccount": "Account della risorsa",
+ "serialNumber": "Numero di serie",
+ "userPrincipalName": "Utente"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Il nome descrittivo è obbligatorio",
+ "pwdRequired": "La password è obbligatoria",
+ "pwdValidFormat": "Impossibile aggiornare la password. Il valore specificato per la nuova password non soddisfa i requisiti di lunghezza o complessità del dominio.",
+ "upnRequired": "L'account del dispositivo è obbligatorio",
+ "upnValidFormat": "I valori possono contenere lettere (a-z, A-Z), numeri (0-9) e trattini. I valori non possono includere uno spazio vuoto."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Riunione e presentazione",
+ "teamCollaboration": "Collaborazione tra team"
+ },
+ "Devices": {
+ "featureDescription": "Windows Autopilot consente di personalizzare la Configurazione guidata per gli utenti.",
+ "importErrorStatus": "Alcuni dispositivi non sono stati importati. Per altre informazioni, fare clic qui.",
+ "importPendingStatus": "L'importazione è in corso. Tempo trascorso: {0} min. Questo processo può richiedere fino a {1} min."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Aggiunto a Microsoft Entra ibrido",
+ "activeDirectoryADLabel": "Aggiunta a Microsoft Entra ibrido con Autopilot",
+ "azureAD": "Aggiunto a Microsoft Entra",
+ "unknownType": "Tipo sconosciuto"
+ },
+ "Filter": {
+ "enrollmentState": "Stato",
+ "profile": "Stato del profilo"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "Il nome descrittivo non può essere vuoto."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Creare un modello di denominazione per aggiungere nomi ai dispositivi durante la registrazione.",
+ "label": "Applica il modello di nome di dispositivo"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "Per i tipi di profili di distribuzione Autopilot aggiunti a Microsoft Entra ibrido i nomi dei dispositivi vengono definiti in base alle impostazioni specificate nella configurazione dell'aggiunta al dominio."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "Società-%RAND:4%",
+ "label": "Immettere un nome",
+ "noDisallowedChars": "Il nome deve contenere solo caratteri alfanumerici, trattini, %SERIAL% o %RAND:x%",
+ "serialLength": "Non è possibile usare più di 7 caratteri con %SERIAL%",
+ "validateLessThan15Chars": "Il nome non può contenere più di 15 caratteri",
+ "validateNoSpaces": "I nomi computer non possono contenere spazi",
+ "validateNotAllNumbers": "Il nome deve contenere anche lettere e/o trattini",
+ "validateNotEmpty": "Il nome non può essere vuoto",
+ "validateOnlyOneMacro": "Il nome deve contenere solo una delle macro %SERIAL% oppure %RAND:x%"
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Creare un nome univoco per i dispositivi. I nomi devono contenere al massimo 15 caratteri e possono contenere lettere (a-z, A-Z), numeri (0-9) e trattini. I nomi non devono contenere solo numeri. I nomi non possono includere uno spazio vuoto. Usare la macro %SERIAL% per aggiungere un numero di serie specifico per l'hardware. In alternativa, usare la macro %RAND:x% per aggiungere una stringa casuale di numeri, dove x equivale al numero di cifre da aggiungere."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Consentire di premere 5 volte il tasto Windows per eseguire OOBE senza autenticazione utente per registrare il dispositivo ed effettuare il provisioning di tutte le app e di tutte le impostazioni relative al contesto di sistema. Le app e le impostazioni relative al contesto utente verranno recapitate all'accesso dell'utente.",
+ "label": "Consenti distribuzione di cui è stato eseguito il pre-provisioning"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Il flusso di aggiunta a Microsoft Entra ID ibrido di Autopilot continuerà anche se non stabilisce alcuna connettività con il controller di dominio durante la configurazione guidata.",
+ "label": "Ignorare il controllo della connettività di AD"
+ },
+ "accountType": "Tipo di account utente",
+ "accountTypeInfo": "Specificare se gli utenti sono amministratori o utenti standard nel dispositivo. Si noti che questa impostazione non è applicabile ad account di tipo Amministratore globale o Amministratore dell'azienda. Questi account non possono essere utenti standard perché possono accedere a tutte le funzionalità amministrative di Microsoft Entra ID.",
+ "configOOBEInfo": "
\r\nConfigurare la Configurazione guidata per i dispositivi di Autopilot\r\n
",
+ "configureDevice": "Modalità di distribuzione",
+ "configureDeviceHintForSurfaceHub2": "Autopilot supporta solo la modalità di distribuzione automatica per Surface Hub 2. Questa modalità non associa l'utente al dispositivo registrato, quindi non richiede credenziali utente.",
+ "configureDeviceHintForWindowsPC": "
\r\n La modalità di distribuzione consente di determinare se un utente deve immettere le credenziali per il provisioning del dispositivo.\r\n
\r\n
\r\n
\r\n Definita dall'utente: i dispositivi vengono associati all'utente che registra il dispositivo e le credenziali utente sono necessarie per il provisioning del dispositivo\r\n
\r\n
\r\n Distribuzione automatica (anteprima): i dispositivi non vengono associati all'utente che registra il dispositivo e le credenziali utente non sono necessarie per il provisioning del dispositivo\r\n
\r\n
",
+ "createSurfaceHub2Info": "Configurare le impostazioni di registrazione di Autopilot per i dispositivi Surface Hub 2. Per impostazione predefinita, Autopilot consente di evitare l'autenticazione utente durante la Configurazione guidata. Altre informazioni su Windows Autopilot per Surface Hub 2.",
+ "createWindowsPCInfo": "\r\n
\r\nLe opzioni seguenti vengono abilitate automaticamente per i dispositivi di Autopilot in modalità di distribuzione automatica:\r\n
\r\n
\r\n
\r\n Ignora la selezione per l'utilizzo aziendale o personale\r\n
\r\n
\r\n Ignora la registrazione OEM e la configurazione di OneDrive\r\n
\r\n
\r\n Ignora l'autenticazione utente nella Configurazione guidata\r\n
\r\n
",
+ "endUserDevice": "Definita dall'utente",
+ "hideEscapeLink": "Nascondi le opzioni di cambio di account",
+ "hideEscapeLinkInfo": "Le opzioni per cambiare account e iniziare con un account diverso vengono visualizzate, rispettivamente, nella pagina di accesso dell'azienda e nella pagina dell'errore di dominio. Per nascondere queste opzioni, è necessario configurare le informazioni personalizzate distintive dell'azienda in Microsoft Entra ID (richiede Windows 10, 1809 o versioni successive o Windows 11).",
+ "info": "Le impostazioni del profilo di AutoPilot definiscono la Configurazione guidata visualizzata agli utenti al primo avvio di Windows. ",
+ "language": "Lingua (area geografica)",
+ "languageInfo": "Specificare la lingua e l'area geografica che verranno usate.",
+ "licenseAgreement": "Condizioni di licenza software Microsoft",
+ "licenseAgreementInfo": "Specificare se visualizzare le condizioni di licenza agli utenti.",
+ "plugAndForgetDevice": "Distribuzione automatica",
+ "privacySettingWarning": "Il valore predefinito per la raccolta di dati di diagnostica è stato modificato per i dispositivi che eseguono Windows 10, versione 1903 e successive o Windows 11. ",
+ "privacySettings": "Impostazioni di privacy",
+ "privacySettingsInfo": "Specificare se visualizzare le impostazioni di privacy agli utenti.",
+ "showCortanaConfigurationPage": "Configurazione di Cortana",
+ "showCortanaConfigurationPageInfo": "Se si sceglie Mostra, verrà abilitata l'introduzione della configurazione di Cortana all'avvio.",
+ "skipEULAWarning": "Informazioni importanti su come nascondere le condizioni di licenza",
+ "skipKeyboardSelection": "Configura automaticamente la tastiera",
+ "skipKeyboardSelectionInfo": "Se questa opzione è true, la pagina di selezione della tastiera viene ignorata se è impostata la lingua.",
+ "subtitle": "Profili di AutoPilot",
+ "title": "Configurazione guidata",
+ "useOSDefaultLanguage": "Impostazione predefinita del sistema operativo",
+ "userSelect": "Selezione utente"
},
+ "Sync": {
+ "lastRequestedLabel": "Ultima richiesta di sincronizzazione",
+ "lastSuccessfulLabel": "Ultima sincronizzazione riuscita",
+ "syncInProgress": "È in corso la sincronizzazione. Ricontrollare tra poco.",
+ "syncInitiated": "La sincronizzazione delle impostazioni di AutoPilot è stata avviata.",
+ "syncSettingsTitle": "Sincronizza le impostazioni di AutoPilot"
+ },
+ "Title": {
+ "devices": "Dispositivi di Windows AutoPilot"
+ },
+ "Tooltips": {
+ "addressableUserName": "Nome del messaggio di saluto visualizzato durante la configurazione del dispositivo.",
+ "azureADDevice": "Passare ai dettagli del dispositivo per il dispositivo associato. N/D indica che non sono presenti dispositivi associati.",
+ "batch": "Attributo di stringa che può essere usato per identificare un gruppo di dispositivi. Il campo Tag di gruppo di Intune è associato all'attributo OrderID sui dispositivi Microsoft Entra.",
+ "dateAssigned": "Timestamp relativo all'ora di assegnazione del profilo al dispositivo.",
+ "deviceAccountPwd": "Password dell'account del dispositivo per i dispositivi Surface Hub. Se immesso, compilare anche l'account del dispositivo e il nome descrittivo.",
+ "deviceAccountUpn": "Indirizzo di posta elettronica dell'account del dispositivo per i dispositivi Surface Hub. Se immesso, compilare anche la password dell'account del dispositivo e il nome descrittivo.",
+ "deviceDisplayName": "Configura un nome univoco per il dispositivo. Il nome verrà ignorato nelle distribuzioni aggiunte a Microsoft Entra ID ibrido. Il nome del dispositivo deriva comunque dal profilo di aggiunta al dominio per i dispositivi Microsoft Entra ID ibrido.",
+ "deviceFriendlyName": "Nome descrittivo del dispositivo per i dispositivi Surface Hub. Se immesso, compilare anche l'account del dispositivo e la password dell'account del dispositivo.",
+ "deviceName": "Nome visualizzato quando un utente ha provato a individuare il dispositivo e a stabilire una connessione.",
+ "deviceUseType": " Il dispositivo verrà configurato in base alle opzioni selezionate. È comunque possibile modificarle in seguito in Impostazioni.\r\n
\r\n
Windows Hello non è attivato per le riunioni e le presentazioni e i dati vengono rimossi dopo ogni sessione.\r\n
\r\n
Windows Hello è attivato per la collaborazione tra team e i profili vengono salvati per un accesso più rapido
\r\n
",
+ "enrollmentState": "Consente di specificare se il dispositivo è stato registrato.",
+ "intuneDevice": "Passare ai dettagli del dispositivo per il dispositivo associato. N/D indica che non sono presenti dispositivi associati.",
+ "lastContacted": "Timestamp relativo all'ora in cui il dispositivo è stato contattato per l'ultima volta.",
+ "make": "Produttore del dispositivo selezionato.",
+ "model": "Modello del dispositivo selezionato",
+ "profile": "Nome del profilo assegnato al dispositivo.",
+ "profileStatus": "Consente di specificare se un profilo è assegnato al dispositivo.",
+ "purchaseOrderId": "ID dell'ordine d'acquisto",
+ "resourceAccount": "Identità del dispositivo o nome dell'entità utente.",
+ "serialNumber": "Numero di serie del dispositivo selezionato.",
+ "userPrincipalName": "Utente per precompilare l'autenticazione durante la configurazione del dispositivo."
+ },
+ "allDevices": "Tutti i dispositivi",
+ "allDevicesAlreadyAssignedError": "Un profilo di Autopilot è già assegnato a Tutti i dispositivi.",
+ "assignFailedDescription": "Non è stato possibile aggiornare le assegnazioni per {0}.",
+ "assignFailedTitle": "Non è stato possibile aggiornare le assegnazioni dei profili di Autopilot.",
+ "assignSuccessDescription": "Le assegnazioni per {0} sono state aggiornate.",
+ "assignSuccessTitle": "Le assegnazioni dei profili di Autopilot sono state aggiornate.",
+ "assignSufaceHub2ProfileNextStep": "Passaggi successivi per la distribuzione",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Assegnare questo profilo ad almeno un gruppo di dispositivi",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Assegnare un account della risorsa a ogni dispositivo Surface Hub in cui si distribuisce il profilo",
+ "assignedDevicesCount": "Dispositivi assegnati",
+ "assignedDevicesResourceAccountDescription": "
Per distribuire questo profilo in un dispositivo, è necessario assegnare al dispositivo un account della risorsa. Selezionare un dispositivo alla volta per assegnare un account della risorsa esistente o crearne uno nuovo. Altre informazioni sugli account della risorsa
",
+ "assignedDevicesResourceAccountStatusBarMessage": "Questa tabella elenca solo i dispositivi Surface Hub 2 a cui è stato assegnato il profilo.",
+ "assigningDescription": "Aggiornamento di assegnazioni per {0}.",
+ "assigningTitle": "Aggiornamento di assegnazioni dei profili di Autopilot.",
+ "autoremediationContext": "È stata rilevata una modifica hardware in questo dispositivo. Stiamo tentando di registrare automaticamente il nuovo hardware. Non è necessario eseguire alcuna operazione in questo momento; lo stato verrà aggiornato al successivo controllo con il risultato. Ulteriori informazioni sulla reimpostazione del profilo.",
+ "autoremediationTitle": "Il dispositivo {0} presenta una correzione in sospeso",
+ "cannotDeleteMessage": "Questo profilo è assegnato ai gruppi. È necessario annullare l'assegnazione di tutti i gruppi da questo profilo prima di poterlo eliminare.",
+ "cannotDeleteTitle": "Non è possibile eliminare {0}",
+ "createdDateTime": "Ora di creazione",
+ "deleteMessage": "Se si elimina questo profilo di AutoPilot, eventuali dispositivi assegnati al profilo avranno stato Non assegnato.",
+ "deleteMessageWithPolicySet": "{0} è incluso in uno o più set di criteri. Se si elimina {0}, non sarà più possibile assegnarlo tramite questi set di criteri.",
+ "deleteTitle": "Eliminare questo profilo?",
+ "description": "Descrizione",
+ "deviceType": "Tipo di dispositivo",
+ "deviceUse": "Uso del dispositivo",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot supporta solo dispositivi aggiunti a Microsoft Entra per Surface Hub 2. Specificare il modo in cui i dispositivi vengono aggiunti ad Active Directory (AD) nell'organizzazione.\r\n
\r\n
\r\n
\r\n Aggiunto a Microsoft Entra: solo cloud senza istanza locale di Windows Server Active Directory.\r\n
\r\n Specificare il modo in cui i dispositivi vengono aggiunti ad Active Directory (AD) nell'organizzazione:\r\n
\r\n
\r\n
\r\n Aggiunta a Microsoft Entra: solo cloud senza istanza locale di Windows Server Active Directory\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Si è verificato un errore durante il recupero del numero di dispositivi assegnati.",
+ "getAssignmentsError": "Si è verificato un errore durante il recupero delle assegnazioni dei profili di Autopilot.",
+ "harvestDeviceId": "Converti tutti i dispositivi interessati in Autopilot",
+ "harvestDeviceIdDescription": "Per impostazione predefinita, questo profilo può essere applicato solo ai dispositivi di Autopilot sincronizzati dal servizio Autopilot.",
+ "harvestDeviceIdInfo": "\r\n Selezionare Sì per registrare tutti i dispositivi interessati in Autopilot, se non sono già stati registrati. Alla successiva Configurazione guidata di Windows, i dispositivi passeranno allo scenario di Autopilot assegnato.\r\n \r\n Si noti che determinati scenari di Autopilot richiedono build minime specifiche di Windows. Assicurarsi che il dispositivo abbia la build minima necessaria per completare lo scenario.\r\n \r\n La rimozione del profilo non rimuoverà i dispositivi interessati da Autopilot. Per rimuovere un dispositivo da Autopilot, usare la visualizzazione Dispositivi di Windows Autopilot.\r\n ",
+ "harvestDeviceIdWarning": "Dopo la conversione, è possibile ripristinare le impostazioni precedenti dei dispositivi di AutoPilot solo eliminandoli dall'elenco di dispositivi di AutoPilot.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "I profili di Windows AutoPilot Deployment consentono di personalizzare la Configurazione guidata per i dispositivi.",
+ "invalidProfileNameMessage": "Il carattere \"{0}\" non è consentito",
+ "joinTypeLabel": "Aggiungi a Microsoft Entra ID come",
+ "lastModifiedDateTime": "Ultima modifica:",
+ "manualRemediationContext": "È stata rilevata una modifica hardware in questo dispositivo. Non riceverà automaticamente un profilo di Autopilot quando viene reimpostato, a meno che non registri di nuovo il dispositivo. Altre informazioni sulla reimpostazione del profilo.",
+ "manualRemediationTitle": "Il dispositivo {0} richiede la tua attenzione",
+ "name": "Nome",
+ "noAutopilotProfile": "Nessun profilo di AutoPilot",
+ "notEnoughPermissionAssignedError": "Le autorizzazioni non sono sufficienti per assegnare questo profilo a uno o più gruppi selezionati. Contattare l'amministratore.",
+ "profile": "profilo",
+ "resourceAccountStatusBarMessage": "È necessario un account della risorsa per ogni dispositivo Surface Hub 2 in cui viene distribuito questo profilo. Fare clic per altre informazioni.",
+ "selectServices": "Selezionare il servizio directory a cui verranno aggiunti i dispositivi",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Modalità di distribuzione",
+ "windowsPCCommandMenu": "PC Windows",
+ "directoryServiceLabel": "Aggiungi a Microsoft Entra ID come"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Dispositivi gestiti",
+ "devicesWithoutEnrollment": "App gestite"
+ },
+ "AppProtection": {
+ "allAppTypes": "Includi tutti i tipi di app",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "App nel profilo di lavoro di Android",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "App in dispositivi dedicati Android Enterprise con la modalità condivisa di Microsoft Entra",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "App in un progetto Open Source Android associato a un utente",
+ "appsOnAndroidOpenSourceProjectUserless": "App in un progetto Open Source Android senza utente",
+ "appsOnIntuneManagedDevices": "App nei dispositivi gestiti di Intune",
+ "appsOnUnmanagedDevices": "App nei dispositivi non gestiti",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Non disponibile",
+ "windows10PlatformLabel": "Windows 10 e versioni successive",
+ "withEnrollment": "Con registrazione",
+ "withoutEnrollment": "Senza registrazione"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Client desktop di Project Online",
+ "visioProRetail": "Visio Online Piano 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Non è stato possibile eliminare {0}",
+ "failureCa": "Non è stato possibile eliminare {0} perché i criteri CA vi fanno riferimento",
+ "modifying": "Eliminazione di {0} in corso",
+ "success": "L'eliminazione di {0} è stata completata"
+ },
+ "Notify": {
+ "failure": "Non è stato possibile aggiornare {0}",
+ "modifying": "Modifica di {0}",
+ "success": "L'aggiornamento di {0} è stato completato"
+ },
+ "menuLabel": "Contesto di autenticazione"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Altre informazioni su come richiedere metodi di autenticazione soddisfatti dai provider di federazione.",
+ "certificate": "Autenticazione del certificato",
+ "infoBubble": "Specificare il metodo di autenticazione richiesto, che dovrà essere soddisfatto dal provider di servizi di federazione, ad esempio AD FS.",
+ "multifactor": "Autenticazione a più fattori",
+ "require": "Richiedi un metodo di autenticazione federato (anteprima)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "I criteri per le sessioni del browser persistenti funzionano correttamente solo se è selezionata l'opzione \"Tutte le app cloud\". Aggiornare la selezione delle app cloud."
+ },
+ "Option": {
+ "always": "Sempre persistente",
+ "help": "Una sessione del browser persistente consente agli utenti di rimanere connessi dopo la chiusura e la riapertura della finestra del browser. \n
\n
Questa impostazione funziona correttamente quando è selezionata l'opzione \"Tutte le app cloud\"
\n
Questo non influisce sulle durate dei token o sull'impostazione della frequenza di accesso.
\n
Questa impostazione eseguirà l'override del criterio \"Mostra l'opzione per rimanere connesso\" nelle Informazioni personalizzate distintive dell'azienda.
\n
L'opzione \"Mai persistente\" eseguirà l'override delle eventuali attestazioni di accesso SSO persistenti passate dai servizi di autenticazione federata.
\n
L'impostazione \"Mai persistente\" bloccherà l'accesso SSO nei dispositivi mobili per le applicazioni e tra le applicazioni e il browser del dispositivo mobile dell'utente.
\n",
+ "label": "Sessione del browser persistente",
+ "never": "Mai persistente"
+ },
+ "Warning": {
+ "allApps": "La sessione del browser persistente funziona correttamente solo quando è selezionata l'opzione Tutte le app cloud. Modificare la selezione delle app cloud. Fare clic qui per altre informazioni."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Ore o giorni",
+ "value": "Frequenza"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} giorni",
+ "singular": "1 giorno"
+ },
+ "Hour": {
+ "plural": "{0} ore",
+ "singular": "1 ora"
+ },
+ "daysOption": "Giorni",
+ "everytime": "Ogni volta",
+ "help": "Periodo di tempo prima che all'utente venga richiesto di eseguire nuovamente l'accesso quando tenta di accedere a una risorsa. L'impostazione predefinita è una finestra mobile di 90 giorni, ovvero agli utenti verrà chiesto di eseguire di nuovo l'autenticazione al primo tentativo di accedere a una risorsa dopo un periodo di inattività nel proprio computer di 90 o più giorni.",
+ "hoursOption": "Ore",
+ "label": "Frequenza di accesso",
+ "placeholder": "Selezionare le unità"
+ }
+ },
+ "mainOption": "Modifica durata sessione",
+ "mainOptionHelp": "Configurare la frequenza delle richieste ricevute dagli utenti e indicare se le sessioni del browser saranno persistenti o meno. Le applicazioni che non supportano i protocolli di autenticazione moderna potrebbero non rispettare tali criteri. In questi casi, contattare lo sviluppatore applicazione."
+ },
+ "SingleSelectorActive": {
+ "failed": "Non è possibile caricare questi dati.",
+ "reattempt": "Caricamento dati. Tentativo {0} di {1}."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Scegliere i ruoli della directory"
+ },
+ "Excluded": {
+ "gridAria": "Elenco di utenti esclusi"
+ },
+ "Included": {
+ "gridAria": "Elenco di utenti inclusi"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Ruoli della directory\" include almeno un ruolo personalizzato",
+ "customRoleSelected": "È stato selezionato almeno un ruolo personalizzato",
+ "failed": "È necessario configurare \"{0}\"",
+ "roles": "Selezionare almeno un ruolo",
+ "usersGroups": "Selezionare almeno un utente o gruppo"
+ },
+ "learnMore": "Controllare l'accesso in base all'utente a cui verranno applicati i criteri, ad esempio utenti e gruppi, identità dei carichi di lavoro, ruoli della directory o guest esterni."
+ },
+ "advancedTabText": "Avanzate",
+ "allCloudAppsErrorBox": "È necessario selezionare \"Tutte le app cloud\" quando è selezionata la concessione \"Richiedi modifica password\"",
+ "allCloudAppsReauth": "\"Tutte le app cloud\" deve essere selezionato quando sono selezionati il controllo della sessione \"Frequenza di accesso ogni volta\" e la condizione \"Rischio di accesso\"",
+ "allCloudOrSpecificApps": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" richiede la selezione di \"Tutte le app cloud\" o di app supportarte specifiche",
+ "allDayCheckboxLabel": "Tutto il giorno",
+ "allDevicePlatforms": "Qualsiasi dispositivo",
+ "allGuestUserInfoContent": "Include i guest di Microsoft Entra B2B ma non i guest di SharePoint B2B",
+ "allGuestUserLabel": "Tutti gli utenti guest ed esterni",
+ "allRiskLevelsOption": "Tutti i livelli di rischio",
+ "allTrustedLocationLabel": "Tutte le posizioni attendibili",
+ "allUserGroupSetSelectorLabel": "Tutti gli utenti e i gruppi selezionati",
+ "allUsersReauth": "Il controllo sessione di \"Frequenza di accesso ogni volta\" richiede la selezione del controllo sessione \"Tutti gli utenti\"",
+ "allUsersString": "Tutti gli utenti",
+ "and": "{0} AND {1} ",
+ "andWithGrouping": "({0}) E {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Qualsiasi app cloud",
+ "appContextOptionInfoContent": "Tag di autenticazione richiesto",
+ "appContextOptionLabel": "Tag di autenticazione richiesto (anteprima)",
+ "appContextUriPlaceholder": "Ad esempio: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Le restrizioni imposte dalle app potrebbero richiedere configurazioni amministrative aggiuntive nelle app cloud. Le restrizioni avranno effetto solo per le nuove sessioni.",
+ "appNotSetSeletorLabel": "0 app cloud selezionate",
+ "appReauthNotSupported": "Questa app non supporta il controllo della sessione \"Frequenza di accesso sempre\".",
+ "applyConditionClientAppInfoBalloonContent": "Consente di configurare le app client per applicare i criteri ad app client specifiche",
+ "applyConditionDevicePlatformInfoBalloonContent": "Consente di configurare le piattaforme dei dispositivi per applicare i criteri a piattaforme specifiche",
+ "applyConditionDeviceStateInfoBalloonContent": "Consente di configurare lo stato dei dispositivi per applicare i criteri a stati dei dispositivi specifici",
+ "applyConditionLocationInfoBalloonContent": "Consente di configurare le posizioni per applicare i criteri alle posizioni attendibili/non attendibili",
+ "applyConditionSigninRiskInfoBalloonContent": "Consente di configurare il rischio di accesso per applicare i criteri ai livelli di rischio selezionati",
+ "applyConditionUserRiskInfoBalloonContent": "Configura il rischio utente per applicare i criteri ai livelli di rischio selezionati",
+ "applyConditonLabel": "Configura",
+ "ariaLabelPolicyDisabled": "Criteri disabilitati",
+ "ariaLabelPolicyEnabled": "Criteri abilitati",
+ "ariaLabelPolicyReportOnly": "Il criterio è in modalità solo report",
+ "blockAccess": "Blocca accesso",
+ "builtInDirectoryRoleLabel": "Ruoli predefiniti della directory",
+ "casCustomControlInfo": "I criteri personalizzati devono essere configurati nel portale di Cloud App Security. Questo controllo è attivo immediatamente per le app in primo piano ed è possibile eseguirne l'onboarding automatico per qualsiasi app. Fare clic qui per ottenere informazioni su entrambi gli scenari.",
+ "casInfoBubble": "Questo controllo funziona per diverse app cloud.",
+ "casPreconfiguredControlInfo": "Questo controllo è attivo immediatamente per le app in primo piano ed è possibile eseguirne l'onboarding automatico per qualsiasi app. Fare clic qui per ottenere informazioni su entrambi gli scenari.",
+ "cert64DownloadCol": "Scarica certificato Base64",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Scarica certificato",
+ "certDurationCol": "Scadenza",
+ "certDurationStartCol": "Valido dal",
+ "certName": "VpnCert",
+ "certainApps": "Solo determinate app sono supportate per \"Frequenza di accesso ogni volta\" se non sono selezionate le concessioni \"Richiedi l'autenticazione a più fattori\" e \"Richiedi la modifica della password\"",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Scegliere le applicazioni",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Applicazioni scelte",
+ "chooseApplicationsEmpty": "Nessuna applicazione",
+ "chooseApplicationsNone": "Nessuno",
+ "chooseApplicationsNoneFound": "L'applicazione \"{0}\" non è stata trovata. Provare con un altro nome o ID.",
+ "chooseApplicationsPlural": "{0} e altre {1}",
+ "chooseApplicationsReAuthEverytimeInfo": "Se si cerca la propria app, alcune applicazioni non possono essere usate con il controllo di sessione \"Richiedi riautenticazione – Sempre\"",
+ "chooseApplicationsRemove": "Rimuovi",
+ "chooseApplicationsReturnedPlural": "{0} applicazioni trovate",
+ "chooseApplicationsReturnedSingular": "1 applicazione trovata",
+ "chooseApplicationsSearchBalloon": "Per cercare un'applicazione, immettere il nome o l'ID corrispondente.",
+ "chooseApplicationsSearchHint": "Cerca applicazioni...",
+ "chooseApplicationsSearchLabel": "Applicazioni",
+ "chooseApplicationsSearching": "Ricerca...",
+ "chooseApplicationsSelect": "Seleziona",
+ "chooseApplicationsSelected": "Selezionato",
+ "chooseApplicationsSingular": "{0} e 1 altra",
+ "chooseApplicationsTooMany": "Sono presenti altri risultati da visualizzare. Per filtrarli, usare la casella di ricerca.",
+ "chooseLocationCorpnetItem": "Rete aziendale",
+ "chooseLocationSelectedLocationsLabel": "Località selezionate",
+ "chooseLocationTrustedIpsItem": "Indirizzi IP attendibili per l'autenticazione a più fattori",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Scegliere le località",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Località scelte",
+ "chooseLocationsEmpty": "Nessuna località",
+ "chooseLocationsExcludedSelectorTitle": "Seleziona",
+ "chooseLocationsIncludedSelectorTitle": "Seleziona",
+ "chooseLocationsNone": "Nessuno",
+ "chooseLocationsNoneFound": "L'applicazione \"{0}\" non è stata trovata. Provare con un altro nome o ID.",
+ "chooseLocationsPlural": "{0} e altre {1}",
+ "chooseLocationsRemove": "Rimuovi",
+ "chooseLocationsReturnedPlural": "{0} località trovate",
+ "chooseLocationsReturnedSingular": "1 località trovata",
+ "chooseLocationsSearchBalloon": "Per cercare una località, immettere il nome corrispondente.",
+ "chooseLocationsSearchHint": "Cerca località...",
+ "chooseLocationsSearchLabel": "Percorsi",
+ "chooseLocationsSearching": "Ricerca...",
+ "chooseLocationsSelect": "Seleziona",
+ "chooseLocationsSelected": "Selezionato",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Seleziona",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Seleziona",
+ "chooseLocationsSingular": "{0} e 1 altra",
+ "chooseLocationsTooMany": "Sono presenti altri risultati da visualizzare. Per filtrarli, usare la casella di ricerca.",
+ "claimProviderAddCommandText": "Nuovo controllo personalizzato",
+ "claimProviderAddNewBladeTitle": "Nuovo controllo personalizzato",
+ "claimProviderDeleteCommand": "Elimina",
+ "claimProviderDeleteDescription": "Eliminare '{0}'? Questa azione non può essere annullata.",
+ "claimProviderDeleteTitle": "Continuare?",
+ "claimProviderEditInfoText": "Immettere il JSON per controlli personalizzati fornito dai provider di attestazioni.",
+ "claimProviderNotificationCreateDescription": "Creazione del controllo personalizzato denominato '{0}'",
+ "claimProviderNotificationCreateFailedDescription": "La creazione del controllo personalizzato '{0}' non è riuscita. Riprovare più tardi.",
+ "claimProviderNotificationCreateFailedTitle": "Non è stato possibile creare il controllo personalizzato",
+ "claimProviderNotificationCreateSuccessDescription": "Il controllo personalizzato denominato '{0}' è stato creato",
+ "claimProviderNotificationCreateSuccessTitle": "La rete '{0}' è stata creata",
+ "claimProviderNotificationCreateTitle": "Creazione della rete '{0}'",
+ "claimProviderNotificationDeleteDescription": "Eliminazione del controllo personalizzato denominato '{0}'",
+ "claimProviderNotificationDeleteFailedDescription": "L'eliminazione del controllo personalizzato '{0}' non è riuscita. Riprovare più tardi.",
+ "claimProviderNotificationDeleteFailedTitle": "Non è stato possibile eliminare il controllo personalizzato",
+ "claimProviderNotificationDeleteSuccessDescription": "Il controllo personalizzato denominato '{0}' è stato eliminato",
+ "claimProviderNotificationDeleteSuccessTitle": "La rete '{0}' è stata eliminata",
+ "claimProviderNotificationDeleteTitle": "Eliminazione di '{0}'",
+ "claimProviderNotificationUpdateDescription": "Aggiornamento del controllo personalizzato denominato '{0}'",
+ "claimProviderNotificationUpdateFailedDescription": "L'aggiornamento del controllo personalizzato '{0}' non è riuscito. Riprovare più tardi.",
+ "claimProviderNotificationUpdateFailedTitle": "Non è stato possibile aggiornare il controllo personalizzato",
+ "claimProviderNotificationUpdateSuccessDescription": "Il controllo personalizzato denominato '{0}' è stato aggiornato",
+ "claimProviderNotificationUpdateSuccessTitle": "La rete '{0}' è stata aggiornata",
+ "claimProviderNotificationUpdateTitle": "Aggiornamento della rete '{0}'",
+ "claimProviderValidationAppIdInvalid": "Il valore \"AppId\" non è valido. Controllare e riprovare.",
+ "claimProviderValidationClientIdMissing": "Nei dati manca un valore \"ClientId\". Controllare e riprovare.",
+ "claimProviderValidationControlClaimsRequestedMissing": "In \"Control\" manca un valore \"ClaimsRequested\". Controllare e riprovare.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "Nell'elemento \"ClaimsRequested\" manca un valore \"Type\". Controllare e riprovare.",
+ "claimProviderValidationControlIdAlreadyExists": "Il valore \"Id\" in \"Control\" esiste già. Controllare e riprovare.",
+ "claimProviderValidationControlIdMissing": "In \"Control\" manca un valore \"Id\". Controllare e riprovare.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "Non è possibile rimuovere il valore \"Id\" da \"Control\" perché vi fanno riferimento criteri esistenti. Rimuovere prima il valore dai criteri.",
+ "claimProviderValidationControlIdTooManyControls": "La proprietà \"Control\" contiene troppi controlli. Verificare e riprovare.",
+ "claimProviderValidationControlIdValueReserved": "Il valore \"Id\" in \"Control\" è una parola chiave riservata. Usare un ID diverso.",
+ "claimProviderValidationControlNameAlreadyExists": "Il valore \"Name\" in \"Control\" esiste già. Controllare e riprovare.",
+ "claimProviderValidationControlNameMissing": "In \"Control\" manca un valore \"Name\". Controllare e riprovare.",
+ "claimProviderValidationControlsMissing": "Nei dati manca un valore \"Controls\". Controllare e riprovare.",
+ "claimProviderValidationDiscoveryUrlMissing": "Nei dati manca un valore \"DiscoveryUrl\". Controllare e riprovare.",
+ "claimProviderValidationInvalid": "I dati specificati non sono validi. Controllare e riprovare.",
+ "claimProviderValidationInvalidJsonDefinition": "Non è possibile salvare il controllo personalizzato. Esaminare il testo JSON e riprovare.",
+ "claimProviderValidationNameAlreadyExists": "Il valore \"Name\" esiste già. Controllare e riprovare.",
+ "claimProviderValidationNameMissing": "Nei dati manca un valore \"Name\". Controllare e riprovare.",
+ "claimProviderValidationUnknown": "Si è verificato un errore sconosciuto durante la convalida dei dati specificati. Controllare e riprovare.",
+ "claimProvidersNone": "Non sono presenti controlli personalizzati",
+ "claimProvidersSearchPlaceholder": "Cerca i controlli.",
+ "classicPoilcyFilterTitle": "Mostra",
+ "classicPolicyAllPlatforms": "Tutte le piattaforme",
+ "classicPolicyClientAppBrowserAndNative": "Browser, app per dispositivi mobili e client desktop",
+ "classicPolicyCloudAppTitle": "Applicazione cloud",
+ "classicPolicyControlAllow": "Consenti",
+ "classicPolicyControlBlock": "Blocca",
+ "classicPolicyControlBlockWhenNotAtWork": "Blocca l'accesso quando non al lavoro",
+ "classicPolicyControlRequireCompliantDevice": "Richiedi un dispositivo conforme",
+ "classicPolicyControlRequireDomainJoinedDevice": "Richiedi dispositivo aggiunto a un dominio",
+ "classicPolicyControlRequireMfa": "Richiedere l'autenticazione a più fattori",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Richiedi autenticazione a più fattori quando non al lavoro",
+ "classicPolicyDeleteCommand": "Elimina",
+ "classicPolicyDeleteFailTitle": "Non è stato possibile eliminare i criteri classici",
+ "classicPolicyDeleteInProgressTitle": "Eliminazione dei criteri classici",
+ "classicPolicyDeleteSuccessTitle": "I criteri classici sono stati eliminati",
+ "classicPolicyDetailBladeTitle": "Dettagli",
+ "classicPolicyDisableCommand": "Disabilita",
+ "classicPolicyDisableConfirmation": "Disabilitare '{0}'? Questa azione non può essere annullata.",
+ "classicPolicyDisableFailDescription": "Non è stato possibile disabilitare '{0}'",
+ "classicPolicyDisableFailTitle": "Non è stato possibile disabilitare i criteri classici",
+ "classicPolicyDisableInProgressDescription": "Disabilitazione di '{0}'",
+ "classicPolicyDisableInProgressTitle": "Disabilitazione dei criteri classici",
+ "classicPolicyDisableSuccessDescription": "La disabilitazione di '{0}' è riuscita",
+ "classicPolicyDisableSuccessTitle": "I criteri classici sono stati disabilitati",
+ "classicPolicyEasSupportedPlatforms": "Piattaforme supportate per Exchange ActiveSync",
+ "classicPolicyEasUnsupportedPlatforms": "Piattaforme non supportate per Exchange ActiveSync",
+ "classicPolicyExcludedPlatformsTitle": "Piattaforme dispositivo escluse",
+ "classicPolicyFilterAll": "Tutti i criteri",
+ "classicPolicyFilterDisabled": "Criteri disabilitati",
+ "classicPolicyFilterEnabled": "Criteri abilitati",
+ "classicPolicyIncludeExcludeMembersDescription": "Escludendo i gruppi, è possibile eseguire la migrazione a fasi dei criteri.",
+ "classicPolicyIncludeExcludeMembersTitle": "Includi/Escludi gruppi",
+ "classicPolicyIncludedPlatformsTitle": "Piattaforme dispositivo incluse",
+ "classicPolicyManualMigrationMessage": "Per questi criteri è necessario procedere alla migrazione manuale.",
+ "classicPolicyMigrateCommand": "Esegui la migrazione",
+ "classicPolicyMigrateConfirmation": "Eseguire la migrazione di '{0}'? La migrazione di questi criteri può essere eseguita solo una volta.",
+ "classicPolicyMigrateFailDescription": "Non è stato possibile eseguire la migrazione di '{0}'",
+ "classicPolicyMigrateFailTitle": "La migrazione dei criteri classici non è riuscita",
+ "classicPolicyMigrateInProgressDescription": "Migrazione di '{0}'",
+ "classicPolicyMigrateInProgressTitle": "Migrazione dei criteri classici",
+ "classicPolicyMigrateRecommendText": "Raccomandazione: eseguire la migrazione ai criteri del nuovo portale di Azure.",
+ "classicPolicyMigrateSuccessTitle": "La migrazione dei criteri classici è riuscita",
+ "classicPolicyMigratedSuccessDescription": "È ora possibile gestire questi criteri classici in Criteri.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "La migrazione di questi criteri classici è stata eseguita come {0} nuovi criteri. È possibile gestire i nuovi criteri in Criteri.",
+ "classicPolicyNoEditPermissionMsg": "Non si è autorizzati a modificare questi criteri. Solo gli amministratori globali e gli amministratori della sicurezza possono modificarli. Fare clic qui per altre informazioni.",
+ "classicPolicySaveFailDescription": "Non è stato possibile salvare '{0}'",
+ "classicPolicySaveFailTitle": "Non è stato possibile salvare i criteri classici",
+ "classicPolicySaveInProgressDescription": "Salvataggio di '{0}'",
+ "classicPolicySaveInProgressTitle": "Salvataggio dei criteri classici",
+ "classicPolicySaveSuccessDescription": "Il salvataggio di '{0}' è riuscito",
+ "classicPolicySaveSuccessTitle": "I criteri classici sono stati salvati",
+ "clientAppBladeLegacyInfoBanner": "L'autorizzazione legacy non è attualmente supportata",
+ "clientAppBladeLegacyUpsellBanner": "Blocca app client non supportate (anteprima)",
+ "clientAppBladeTitle": "App client",
+ "clientAppDescription": "Selezionare le app client a cui verranno applicati questi criteri",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync non supporta tutte le altre condizioni in questo momento",
+ "clientAppLearnMore": "È possibile controllare l'accesso utente per applicarlo ad applicazioni client specifiche che non usano l'autenticazione moderna.",
+ "clientAppLegacyHeader": "Client con autenticazione legacy",
+ "clientAppMobileDesktop": "App per dispositivi mobili e client desktop",
+ "clientAppModernHeader": "Client con autenticazione moderna",
+ "clientAppOnlySupportedPlatforms": "Applica i criteri solo alle piattaforme supportate",
+ "clientAppSelectSpecificClientApps": "Selezionare le app client",
+ "clientAppWebBrowser": "Browser",
+ "clientAppsSelectedLabel": "{0} inclusi",
+ "clientTypeBrowser": "Browser",
+ "clientTypeEas": "Client Exchange ActiveSync",
+ "clientTypeEasInfo": "Client Exchange ActiveSync che usano solo l'autenticazione legacy.",
+ "clientTypeModernAuth": "Client con autenticazione moderna",
+ "clientTypeOtherClients": "Altri client",
+ "clientTypeOtherClientsInfo": "Sono inclusi i client Office precedenti e altri protocolli di posta elettronica (POP, IMAP, SMTP e così via). [Altre informazioni][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "{0} app cloud configurate in questo criterio sono state eliminate dalla directory, ma questo non influisce sulle altre app nel criterio. All'aggiornamento successivo della sezione del criterio relativa all'applicazione, le app eliminate verranno automaticamente rimosse.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Tutte le app Microsoft",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Consenti app cloud, desktop e per dispositivi mobili Microsoft (anteprima)",
+ "cloudappsSelectionBladeAllCloudapps": "Tutte le app cloud",
+ "cloudappsSelectionBladeExcludeDescription": "Selezionare le app cloud da escludere dai criteri",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Seleziona app cloud escluse",
+ "cloudappsSelectionBladeIncludeDescription": "Selezionare le app cloud a cui verranno applicati questi criteri",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Seleziona",
+ "cloudappsSelectionBladeSelectedCloudapps": "Selezionare le app",
+ "cloudappsSelectorInfoBallonText": "Servizi a cui accede l'utente per svolgere il lavoro. Ad esempio, 'Salesforce'",
+ "cloudappsSelectorPluralExcluded": "{0} app escluse",
+ "cloudappsSelectorPluralIncluded": "{0} app incluse",
+ "cloudappsSelectorSingularExcluded": "1 app esclusa",
+ "cloudappsSelectorSingularIncluded": "1 app inclusa",
+ "cloudappsSelectorUserPlural": "{0} app",
+ "cloudappsSelectorUserSingular": "1 app",
+ "conditionLabelMulti": "{0} condizioni selezionate",
+ "conditionLabelOne": "1 condizione selezionata",
+ "conditionalAccessBladeTitle": "Accesso condizionale",
+ "conditionsNotSelectedLabel": "Non configurato",
+ "conditionsReqMfaReauthSet": "Alcune opzioni non sono disponibili a causa della concessione \"Richiedi l'autenticazione a più fattori\" e del controllo della sessione \"Frequenza di accesso ogni volta\" attualmente selezionato",
+ "conditionsReqPwSet": "Alcune opzioni non sono disponibili perché è attualmente selezionata la concessione \"Richiedi modifica password\"",
+ "configureCasText": "Configura Cloud App Security",
+ "configureCustomControlsText": "Configura criteri personalizzati",
+ "controlLabelMulti": "{0} controlli selezionati",
+ "controlLabelOne": "1 controllo selezionato",
+ "controlValidatorText": "Selezionare almeno un controllo",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Altre informazioni su come richiedere dispositivi conformi.",
+ "controlsDeviceComplianceInfoBubble": "Il dispositivo deve essere compatibile con Intune. In caso contrario, all'utente verrà chiesto di rendere compatibile il dispositivo.",
+ "controlsDomainJoinedAriaLabel": "Scopri di più su come richiedere dispositivi aggiunti a Microsoft Entra ibrido.",
+ "controlsDomainJoinedInfoBubble": "I dispositivi devono essere aggiunti a Microsoft Entra ibrido.",
+ "controlsMamAriaLabel": "Altre informazioni su come richiedere applicazioni client approvate.",
+ "controlsMamInfoBubble": "Il dispositivo deve usare queste applicazioni client approvate.",
+ "controlsMfaInfoBubble": "L'utente deve completare requisiti di sicurezza aggiuntivi, ad esempio telefonata, SMS",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Altre informazioni su come richiedere app protette da criteri.",
+ "controlsRequireCompliantAppInfoBubble": "Il dispositivo deve usare app protette da criteri.",
+ "controlsRequirePasswordResetAriaLabel": "Altre informazioni su come richiedere una modifica della password.",
+ "controlsRequirePasswordResetInfoBubble": "Richiedere la modifica della password per ridurre il rischio utente. Questa opzione richiede anche l’autenticazione a più fattori. Non è possibile usare altri controlli.",
+ "countriesRadiobuttonInfoBalloonContent": "Il paese/area geografica da cui proviene l'accesso è determinato dall'indirizzo IP dell'utente.",
+ "createNewVpnCert": "Nuovo certificato",
+ "createdTimeLabel": "Ora di creazione",
+ "customRoleLabel": "Ruoli personalizzati (non supportati)",
+ "dateRangeTypeLabel": "Intervallo di date",
+ "daysOfWeekPlaceholderText": "Filtro per i giorni della settimana",
+ "daysOfWeekTypeLabel": "Giorni della settimana",
+ "deletePolicyNoLicenseText": "È possibile eliminare subito questo criterio. Dopo l'eliminazione, sarà possibile ricrearlo solo quando saranno disponibili le licenze necessarie.",
+ "descriptionContentForControlsAndOr": "Per più controlli",
+ "devicePlatform": "Piattaforma del dispositivo",
+ "devicePlatformConditionHelpDescription": "Consente di applicare il criterio alle piattaforme del dispositivo selezionate.\n[Altre informazioni][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} inclusi",
+ "devicePlatformIncludeExclude": "{0} e {1} escluse",
+ "devicePlatformNoSelectionError": "Alcune piattaforme del dispositivo richiedono la selezione di un elemento secondario.",
+ "devicePlatformsNone": "Nessuno",
+ "deviceSelectionBladeExcludeDescription": "Selezionare le piattaforme da escludere dai criteri",
+ "deviceSelectionBladeIncludeDescription": "Selezionare le piattaforme del dispositivo da includere in questi criteri",
+ "deviceStateAll": "Tutti gli stati dei dispositivi",
+ "deviceStateCompliant": "Dispositivo contrassegnato come conforme",
+ "deviceStateCompliantInfoContent": "I dispositivi conformi con Intune verranno esclusi dalla valutazione di questi criteri, quindi se ad esempio i criteri bloccano l'accesso, verranno bloccati tutti i dispositivi tranne quelli conformi con Intune.",
+ "deviceStateConditionConfigureInfoContent": "Configura i criteri in base allo stato del dispositivo",
+ "deviceStateConditionSelectorInfoContent": "Indica se lo stato del dispositivo da cui l'utente esegue l'accesso è 'Aggiunto a Microsoft Entra ibrido' o 'contrassegnato come conforme'. \n Questo è stato deprecato. In alternativa, usare '{1}'.",
+ "deviceStateConditionSelectorLabel": "Stato del dispositivo (deprecato)",
+ "deviceStateDomainJoined": "Dispositivo aggiunto a Microsoft Entra ibrido",
+ "deviceStateDomainJoinedInfoContent": "I dispositivi aggiunti a Microsoft Entra ibrido verranno esclusi dalla valutazione di questi criteri, quindi se ad esempio i criteri bloccano l'accesso, verranno bloccati tutti i dispositivi tranne quelli aggiunti a Microsoft Entra ibrido.",
+ "deviceStateDomainJoinedInfoLinkText": "Altre informazioni.",
+ "deviceStateExcludeDescription": "Selezionare la condizione dello stato del dispositivo usata per escludere i dispositivi dai criteri.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} ed escludi {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} ed escludi {1}, {2}",
+ "directoryRoleInfoContent": "È possibile assegnare un criterio ai ruoli predefiniti della directory.",
+ "directoryRolesLabel": "Ruoli della directory (anteprima)",
+ "discardbutton": "Rimuovi",
+ "downloadDefaultFileName": "Intervalli IP",
+ "downloadExampleFileName": "Esempio",
+ "downloadExampleHeader": "File di esempio con dimostrazioni delle tipologie di dati accettate. Le righe che iniziano con # verranno ignorate.",
+ "duplicate": "Duplica",
+ "duplicatePolicyName": "COPIA DI {0}",
+ "endDatePickerLabel": "Estremità",
+ "endTimePickerLabel": "Ora di fine",
+ "enterCountryText": "L'indirizzo IP e il paese/area geografica vengono valutati in coppia. Selezionare il paese.",
+ "enterIpText": "L'indirizzo IP e il paese/area geografica vengono valutati in coppia. Immettere l'indirizzo IP.",
+ "enterUserText": "Nessun utente selezionato. Selezionare un utente.",
+ "evaluationResult": "Risultato della valutazione",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync solo con piattaforme supportate",
+ "excludeAllTrustedLocationSelectorText": "tutte le posizioni attendibili",
+ "featureRequiresP2": "Questa funzionalità richiede la licenza Microsoft Entra ID P2.",
+ "friday": "Venerdì",
+ "grantControls": "Concedi controlli",
+ "gridNetworkTrusted": "Attendibile",
+ "gridPolicyCreatedDateTime": "Data di creazione",
+ "gridPolicyEnabled": "Abilitato",
+ "gridPolicyModifiedDateTime": "Data modifica",
+ "gridPolicyName": "Nome criteri",
+ "gridPolicyState": "Stato",
+ "groupSelectionBladeExcludeDescription": "Selezionare i gruppi da escludere dai criteri",
+ "groupSelectionBladeExcludedSelectorTitle": "Selezionare i gruppi esclusi",
+ "groupSelectionBladeSelect": "Selezione gruppi",
+ "groupSelectorInfoBallonText": "Gruppi nella directory a cui si applicano i criteri. Ad esempio: 'gruppo pilota'",
+ "groupsSelectionBladeTitle": "Gruppi",
+ "helpCommonScenariosText": "Informazioni sugli scenari comuni",
+ "helpCondition1": "Quando un utente si trova all'esterno della rete aziendale",
+ "helpCondition2": "Quando gli utenti nel gruppo 'Manager' eseguono l'accesso",
+ "helpConditionsTitle": "Condizioni",
+ "helpControl1": "Verrà richiesto di eseguire l'accesso con l’autenticazione a più fattori",
+ "helpControl2": "Verrà richiesto di eseguire l'accesso tramite un dispositivo aggiunto a un dominio o compatibile con Intune",
+ "helpControlsTitle": "Controlli",
+ "helpIntroText": "L'accesso condizionale consente di imporre requisiti di accesso quando si verificano condizioni specifiche. Ecco alcuni esempi",
+ "helpIntroTitle": "Informazioni sull'accesso condizionale",
+ "helpLearnMoreText": "Per altre informazioni sull'accesso condizionale, vedere",
+ "helpStartStep1": "Per creare il primo criterio, fare clic su \"+ Nuovo criterio\"",
+ "helpStartStep2": "Specificare le Condizioni e i controlli del criterio",
+ "helpStartStep3": "Al termine, fare clic su Attiva criterio e quindi su Crea",
+ "helpStartTitle": "Attività iniziali",
+ "highRisk": "Alta",
+ "includeAndExcludeAppsTextFormat": "Includi: {0}. Escludi: {1}.",
+ "includeAppsTextFormat": "Includi: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Le aree sconosciute sono indirizzi IP di cui non è possibile eseguire il mapping a un paese/area geografica.",
+ "includeUnknownAreasCheckboxLabel": "Includi aree sconosciute",
+ "infoCommandLabel": "Informazioni",
+ "invalidCertDuration": "La durata del certificato non è valida",
+ "invalidIpAddress": "Il valore deve essere un indirizzo IP valido",
+ "invalidReAuthSignInRiskOptionSelected": "Il controllo della sessione \"Frequenza di accesso ogni volta\" non consente la selezione \"Nessun rischio\" nel controllo della condizione \"rischio di accesso\".",
+ "invalidUriErrorMsg": "Immettere un URI valido. Ad esempio 'uri:contoso.com:acr' ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Carica tutti",
+ "loading": "Caricamento...",
+ "locationConfigureNamedLocationsText": "Configura tutte le posizioni attendibili",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Il nome della posizione è troppo lungo. Lunghezza massima: 256 caratteri",
+ "locationSelectionBladeExcludeDescription": "Selezionare le posizioni da escludere dai criteri",
+ "locationSelectionBladeIncludeDescription": "Selezionare le località da includere nei criteri",
+ "locationsAllLocationsLabel": "Tutte le località",
+ "locationsAllNamedLocationsLabel": "Tutti gli indirizzi IP attendibili",
+ "locationsAllPrivateLinksLabel": "Tutti i collegamenti privati nel tenant",
+ "locationsIncludeExcludeLabel": "{0} ed escludi tutti gli IP attendibili",
+ "locationsSelectedPrivateLinksLabel": "Collegamenti privati selezionati",
+ "lowRisk": "Bassa",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "Per gestire i criteri di accesso condizionale, l'organizzazione necessita di Microsoft Entra ID P1 o P2.",
+ "manageSecurityDefaultsAriaLabel": "Gestire le impostazioni predefinite per la sicurezza.",
+ "markAsTrustedCheckboxInfoBalloonContent": "L'accesso da una posizione attendibile riduce il rischio di accesso dell'utente. Contrassegnare questa posizione come attendibile solo se si è certi che gli intervalli IP immessi siano stabiliti e credibili nell'organizzazione.",
+ "markAsTrustedCheckboxLabel": "Contrassegna come posizione attendibile",
+ "mediumRisk": "Medio",
+ "memberSelectionCommandRemove": "Rimuovi",
+ "menuItemClaimProviderControls": "Controlli personalizzati (anteprima)",
+ "menuItemClassicPolicies": "Criteri classici",
+ "menuItemInsightsAndReporting": "Informazioni dettagliate e report",
+ "menuItemManage": "Gestione",
+ "menuItemNamedLocationsPreview": "Località denominate (anteprima)",
+ "menuItemNamedNetworks": "Località denominate",
+ "menuItemPolicies": "Criteri",
+ "menuItemTermsOfUse": "Condizioni per l'utilizzo",
+ "modifiedTimeLabel": "Ora di modifica",
+ "monday": "Lunedì",
+ "nameLabel": "Nome",
+ "namedLocationCountryInfoBanner": "Solo gli indirizzi IPv4 vengono mappati ai paesi o alle aree geografiche. Gli indirizzi IPv6 sono inclusi in aree geografiche/paesi sconosciuti.",
+ "namedLocationTypeCountry": "Paesi/aree geografiche",
+ "namedLocationTypeLabel": "Definisci il tipo di posizione in base a:",
+ "namedLocationUpsellBanner": "Questa visualizzazione è stata deprecata. Passare alla visualizzazione nuova e migliorata 'Località denominate'.",
+ "namedLocationsHelpDescription": "Le località denominate vengono usate dai report sulla sicurezza di Microsoft Entra ID per ridurre i falsi positivi e dai criteri di accesso condizionale di Microsoft Entra.\n[Altre informazioni][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Aggiungi un nuovo intervallo IP. Ad esempio: 40.77.182.32/27",
+ "namedNetworkCountryNeeded": "È necessario selezionare almeno un paese/area geografica",
+ "namedNetworkDeleteCommand": "Elimina",
+ "namedNetworkDeleteDescription": "Eliminare '{0}'? Questa azione non può essere annullata.",
+ "namedNetworkDeleteTitle": "Continuare?",
+ "namedNetworkDownloadIpRange": "Scarica",
+ "namedNetworkInvalidRange": "Il valore deve essere un intervallo IP valido.",
+ "namedNetworkIpRangeNeeded": "È necessario specificare almeno un intervallo IP valido",
+ "namedNetworkIpRangesDescriptionContent": "Configurare gli intervalli IP dell'organizzazione",
+ "namedNetworkIpRangesTab": "Intervalli IP",
+ "namedNetworkListAdd": "Nuovo percorso",
+ "namedNetworkListConfigureTrustedIps": "Configurare indirizzi IP attendibili per l'autenticazione a più fattori",
+ "namedNetworkNameDescription": "Ad esempio: 'Ufficio di Redmond'",
+ "namedNetworkNameInvalid": "Il nome specificato non è valido.",
+ "namedNetworkNameRequired": "È necessario specificare un nome per questo percorso.",
+ "namedNetworkNoIpRanges": "Nessun intervallo IP",
+ "namedNetworkNotificationCreateDescription": "Creazione del percorso denominato '{0}'",
+ "namedNetworkNotificationCreateFailedDescription": "La creazione del percorso '{0}' non è riuscita. Riprovare più tardi.",
+ "namedNetworkNotificationCreateFailedTitle": "Non è stato possibile creare il percorso",
+ "namedNetworkNotificationCreateSuccessDescription": "Il percorso denominato '{0}' è stata creata",
+ "namedNetworkNotificationCreateSuccessTitle": "La rete '{0}' è stata creata",
+ "namedNetworkNotificationCreateTitle": "Creazione della rete '{0}'",
+ "namedNetworkNotificationDeleteDescription": "Eliminazione del percorso denominato '{0}'",
+ "namedNetworkNotificationDeleteFailedDescription": "L'eliminazione del percorso '{0}' non è riuscita. Riprovare più tardi.",
+ "namedNetworkNotificationDeleteFailedTitle": "Non è stato possibile eliminare il percorso",
+ "namedNetworkNotificationDeleteSuccessDescription": "Il percorso denominato '{0}' è stato eliminato",
+ "namedNetworkNotificationDeleteSuccessTitle": "La rete '{0}' è stata eliminata",
+ "namedNetworkNotificationDeleteTitle": "Eliminazione di '{0}'",
+ "namedNetworkNotificationUpdateDescription": "Aggiornamento del percorso denominato '{0}'",
+ "namedNetworkNotificationUpdateFailedDescription": "L'aggiornamento del percorso '{0}' non è riuscito. Riprovare più tardi.",
+ "namedNetworkNotificationUpdateFailedTitle": "Non è stato possibile aggiornare il percorso",
+ "namedNetworkNotificationUpdateSuccessDescription": "Il percorso denominato '{0}' è stato aggiornato",
+ "namedNetworkNotificationUpdateSuccessTitle": "La rete '{0}' è stata aggiornata",
+ "namedNetworkNotificationUpdateTitle": "Aggiornamento della rete '{0}'",
+ "namedNetworkSearchPlaceholder": "Cerca i percorsi.",
+ "namedNetworkUploadFailedDescription": "Si è verificato un errore durante l'analisi del file fornito. Assicurarsi di caricare un file di testo normale con ogni riga nel formato CIDR.",
+ "namedNetworkUploadFailedTitle": "Non è stato possibile analizzare '{0}'",
+ "namedNetworkUploadInProgressDescription": "È in corso un tentativo per analizzare i valori CIDR validi da '{0}'.",
+ "namedNetworkUploadInProgressTitle": "Analisi di '{0}'",
+ "namedNetworkUploadInvalidDescription": "'{0}' è troppo grande o presenta un formato non valido.",
+ "namedNetworkUploadInvalidTitle": "'{0}' non è valido",
+ "namedNetworkUploadIpRange": "Carica",
+ "namedNetworkUploadSuccessDescription": "{0} righe analizzate. {1} righe in un formato non valido. {2} righe ignorate.",
+ "namedNetworkUploadSuccessTitle": "L'analisi di '{0}' è stata completata",
+ "namedNetworksAdd": "Nuova località denominata",
+ "namedNetworksConditionHelpDescription": "È possibile controllare l'accesso degli utenti in base alla posizione fisica.\n[Altre informazioni][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} e {1} escluse",
+ "namedNetworksHelpDescription": "Le località denominate vengono usate dai report sulla sicurezza di Microsoft Entra ID per ridurre i falsi positivi e dai criteri di accesso condizionale di Microsoft Entra.\n[Altre informazioni][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} inclusi",
+ "namedNetworksNone": "Non sono state trovate località denominate.",
+ "namedNetworksTitle": "Configura posizioni",
+ "namednetworkExceedingSizeErrorBladeTitle": "Dettagli errore",
+ "namednetworkExceedingSizeErrorDetailText": "Fare clic qui per altri dettagli.",
+ "namednetworkExceedingSizeErrorMessage": "È stato superato lo spazio di archiviazione massimo consentito per le località denominate. Riprovare con un elenco più breve. Fare clic qui per visualizzare altri dettagli.",
+ "needMfaSecondary": "È necessario selezionare \"Richiedi l'autenticazione a più fattori\" quando si seleziona \"Frequenza di accesso ogni volta\" con \"Solo metodi di autenticazione secondari\"",
+ "needMfaSpecificApps": "\"Il controllo sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Richiedi autenticazione a più fattori\" quando sono selezionate app supportate in modo specifico",
+ "newCertName": "nuovo certificato",
+ "noAttributePermissionsError": "Privilegi insufficienti per la creazione o l'aggiornamento dei criteri. Per aggiungere/modificare i filtri dinamici, è necessario il ruolo con autorizzazione di lettura degli attributi.",
+ "noPolicyRowMessage": "Nessun criterio",
+ "noSPSelected": "Nessuna entità servizio selezionata",
+ "noUpdatePermissionMessage": "Non si è autorizzati ad aggiornare queste impostazioni. Per ottenere l'accesso, contattare l'amministratore globale.",
+ "noUserSelected": "Nessun utente selezionato",
+ "noneRisk": "Nessun rischio",
+ "office365Description": "Queste app includono Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer e altre ancora.",
+ "office365InfoBox": "Almeno una delle app selezionate fa parte di Office 365. È consigliabile impostare il criterio sull'app di Office 365.",
+ "oneUserSelected": "1 utente selezionato",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Solo gli amministratori globali possono salvare questi criteri.",
+ "or": "{0} OR {1} ",
+ "pickerDoneCommand": "Fatto",
+ "policiesBladeAdPremiumUpsellBannerText": "È possibile creare criteri personalizzati per soddisfare condizioni specifiche, ad esempio app cloud, rischio di accesso e piattaforme di dispositivi con Microsoft Entra ID Premium.",
+ "policiesBladeTitle": "Criteri",
+ "policiesBladeTitleWithAppName": "Criteri: {0}",
+ "policiesDisabledBannerText": "Non è consentito creare e modificare criteri per applicazioni con un attributo di accesso collegato.",
+ "policiesHitMaxLimitStatusBarMessage": "È stato raggiunto il numero massimo di criteri per questo tenant. Eliminare alcuni criteri prima di crearne altri.",
+ "policyAssignmentsSection": "Assegnazioni",
+ "policyBlockAllInfoBox": "Il criterio configurato bloccherà tutti gli utenti, quindi non è supportato. Verificare le assegnazioni e i controlli. Escludere l'utente corrente {0}, se si desidera salvare questo criterio.",
+ "policyCloudAppsDisplayTextAllApp": "Tutte le app",
+ "policyCloudAppsLabel": "App cloud",
+ "policyConditionClientAppDescription": "Software che l'utente usa per accedere all'app cloud. Ad esempio, 'Browser'",
+ "policyConditionClientAppV2Description": "Software che l'utente usa per accedere all'app cloud. Ad esempio, 'Browser'",
+ "policyConditionDevicePlatform": "Piattaforme del dispositivo",
+ "policyConditionDevicePlatformDescription": "Piattaforma da cui accede l'utente. Ad esempio, 'iOS'",
+ "policyConditionLocation": "Località",
+ "policyConditionLocationDescription": "Posizione (determinata tramite l'intervallo di indirizzi IP) da cui accede l'utente",
+ "policyConditionLocationPreview": "Località (anteprima)",
+ "policyConditionSigninRisk": "Rischio di accesso",
+ "policyConditionSigninRiskDescription": "Probabilità che l'accesso provenga da una persona diversa dall'utente. Il livello di rischio può essere alto, medio o basso. Richiede una licenza di Microsoft Entra ID P2.",
+ "policyConditionUserRisk": "Rischio utente",
+ "policyConditionUserRiskDescription": "Consente di configurare i livelli di rischio utente necessari per l'applicazione dei criteri",
+ "policyConditioniClientApp": "App client",
+ "policyControlAllowAccessDisplayedName": "Concedi accesso",
+ "policyControlAuthenticationStrengthDisplayedName": "Richiedi livello di autenticazione (anteprima)",
+ "policyControlBladeTitle": "Concedi",
+ "policyControlBlockAccessDisplayedName": "Blocca accesso",
+ "policyControlCompliantDeviceDisplayedName": "Richiedi che i dispositivi siano contrassegnati come conformi",
+ "policyControlContentDescription": "Controllare l'imposizione dell'accesso per bloccare o concedere l'accesso.",
+ "policyControlInfoBallonText": "Permette di bloccare l'accesso o di selezionare requisiti aggiuntivi che devono essere soddisfatti per consentire l'accesso",
+ "policyControlMfaChallengeDisplayedName": "Richiedere l'autenticazione a più fattori",
+ "policyControlRequireCompliantAppDisplayedName": "Richiedi criteri di protezione dell'app",
+ "policyControlRequireDomainJoinedDisplayedName": "Richiedi dispositivo aggiunto a Microsoft Entra ibrido",
+ "policyControlRequireMamDisplayedName": "Richiedi app client approvata",
+ "policyControlRequiredPasswordChangeDisplayedName": "Richiedi modifica password",
+ "policyControlSelectAuthStrength": "Richiedi complessità dell'autenticazione",
+ "policyControlsNoControlsSelected": "0 controlli selezionati",
+ "policyControlsSection": "Controlli di accesso",
+ "policyCreatBladeTitle": "Nuova",
+ "policyCreateButton": "Crea",
+ "policyCreateFailedMessage": "Errore: {0}",
+ "policyCreateFailedTitle": "Non è stato possibile creare '{0}'",
+ "policyCreateInProgressTitle": "Creazione della rete '{0}'",
+ "policyCreateSuccessMessage": "La creazione di '{0}' è riuscita. I criteri saranno abilitati entro pochi minuti se l'opzione \"Abilita criteri\" è impostata su \"Sì\".",
+ "policyCreateSuccessTitle": "La creazione di '{0}' è riuscita",
+ "policyDeleteConfirmation": "Eliminare '{0}'? Questa azione non può essere annullata.",
+ "policyDeleteFailTitle": "Non è stato possibile eliminare '{0}'",
+ "policyDeleteInProgressTitle": "Eliminazione di '{0}'",
+ "policyDeleteSuccessTitle": "L'eliminazione di '{0}' è riuscita",
+ "policyEnforceLabel": "Abilita criterio",
+ "policyErrorCannotSetSigninRisk": "Non si è autorizzati a salvare criteri con una condizione di rischio di accesso.",
+ "policyErrorNoPermission": "Non si è autorizzati a salvare i criteri. Contattare l'amministratore globale.",
+ "policyErrorUnknown": "Si è verificato un errore. Riprovare più tardi.",
+ "policyFallbackWarningMessage": "Errore durante la creazione o l'aggiornamento di '{0}' usando MS Graph con conseguente fallback in Ad Graph. Esaminare lo scenario seguente perché è molto probabile che si presenti un bug quando si chiama l'endpoint dei criteri per MS Graph con una condizione non compatibile.",
+ "policyFallbackWarningTitle": "Creazione o aggiornamento di '{0}' eseguito parzialmente",
+ "policyNameCannotBeEmpty": "Il nome dei criteri non può essere vuoto",
+ "policyNameDevice": "Criteri del dispositivo",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Criteri di Gestione delle app per dispositivi mobili",
+ "policyNameMfaLocation": "Autenticazione a più fattori e criteri di posizione",
+ "policyNamePlaceholderText": "Ad esempio: 'Criteri app conformità dispositivo'",
+ "policyNameTooLongError": "Il nome dei criteri è troppo lungo. La lunghezza massima è 256 caratteri",
+ "policyOff": "Disattivato",
+ "policyOn": "Attivato",
+ "policyReportOnly": "Solo report",
+ "policyReviewSection": "Visualizza",
+ "policySaveButton": "Salva",
+ "policyStatusIconDescription": "Criteri abilitati",
+ "policyStatusIconEnabled": "Icona stato abilitato",
+ "policyTemplateName1": "Usa restrizioni imposte dall'app per l'accesso a {0} tramite il browser",
+ "policyTemplateName2": "Consenti l'accesso a {0} solo su dispositivi gestiti",
+ "policyTemplateName3": "Criterio sottoposto a migrazione dalle impostazioni di Valutazione continua dell'accesso",
+ "policyTriggerRiskSpecific": "Selezionare il livello di rischio specifico",
+ "policyTriggersInfoBalloonText": "Condizioni che definiscono la condizione in base a cui si applicano i criteri. Ad esempio, 'posizione'",
+ "policyTriggersNoConditionsSelected": "0 condizioni selezionate",
+ "policyTriggersSelectorLabel": "Condizioni",
+ "policyUpdateFailedMessage": "Errore: {0}",
+ "policyUpdateFailedTitle": "Non è stato possibile aggiornare {0}",
+ "policyUpdateInProgressTitle": "Aggiornamento di {0}",
+ "policyUpdateSuccessMessage": "L'aggiornamento di {0} è riuscito. I criteri saranno abilitati entro pochi minuti se l'opzione \"Abilita criteri\" è impostata su \"Sì\".",
+ "policyUpdateSuccessTitle": "L'aggiornamento di {0} è stato completato",
+ "primaryCol": "Primario",
+ "privateLinkLabel": "Collegamento privato a Microsoft Entra ID",
+ "reportOnlyInfoBox": "Modalità Solo report: i criteri vengono valutati e registrati all'accesso ma non influiscono sugli utenti.",
+ "requireAllControlsText": "Richiedi tutti i controlli selezionati",
+ "requireCompliantDevice": "Richiedi un dispositivo conforme",
+ "requireDomainJoined": "Richiedi dispositivo aggiunto a un dominio",
+ "requireGrantReauth": "Il controllo sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Richiedi l'autenticazione a più fattori\" o \"Richiedi la modifica della password\" quando è selezionato \"Tutte le app cloud\"",
+ "requireMFA": "Richiedere l'autenticazione a più fattori",
+ "requireMfaReauth": "Il controllo sessione di \"Frequenza di accesso ogni volta richiede la concessione del controllo \"Richiedi l'autenticazione a più fattori\" per \"Rischio di accesso\"",
+ "requireOneControlText": "Richiedi uno dei controlli selezionati",
+ "requirePasswordChangeReauth": "Il controllo sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Richiedi la modifica della password\" per \"Rischio di accesso\"",
+ "requireRiskReauth": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Rischio utente\" o \"Rischio di accesso\" quando è selezionato \"Tutte le app cloud\".",
+ "requireRiskReauthRiskNotEnabled": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" non è disponibile quando è selezionato \"Tutte le app cloud\".",
+ "requireRiskReauthSignInOnly": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Rischio di accesso\" quando è selezionato \"Tutte le app cloud\".",
+ "requireRiskReauthUserOnly": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Rischio utente\" quando è selezionato \"Tutte le app cloud\".",
+ "resetFilters": "Reimposta filtri",
+ "sPRequired": "Entità servizio obbligatoria",
+ "sPSelectorInfoBalloon": "Utente o entità servizio da testare",
+ "saturday": "Sabato",
+ "searchTextTooLongError": "Il testo di ricerca è troppo lungo. Al massimo 256 caratteri",
+ "securityDefaultsPolicyName": "Impostazioni predefinite per la sicurezza",
+ "securityDefaultsTextMessage": "Le impostazioni predefinite per la sicurezza devono essere disabilitate per abilitare i criteri di accesso condizionale.",
+ "securityDefaultsUpdateInProgressText": "È in corso un aggiornamento delle impostazioni predefinite di sicurezza. Attendere qualche istante e riprovare.",
+ "securityDefaultsWarningMessage": "Si stanno per gestire le configurazioni di sicurezza dell'organizzazione. È prima di tutto necessario {0}disabilitare le impostazioni predefinite per la sicurezza{1} prima di abilitare i criteri di accesso condizionale.",
+ "selectDevicePlatforms": "Seleziona piattaforme del dispositivo",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Seleziona percorsi",
+ "selectedSP": "Entità servizio selezionata",
+ "servicePrincipalBladeExcludedSelectorTitle": "Selezionare le entità servizio escluse",
+ "servicePrincipalBladeIncludedSelectorTitle": "Selezionare entità servizio",
+ "servicePrincipalDataGridAria": "Elenco delle entità servizio disponibili",
+ "servicePrincipalDropDownLabel": "A cosa si applica questo criterio?",
+ "servicePrincipalInfoBox": "Alcune condizioni non sono disponibili a causa della selezione di '{0}' nell'assegnazione dei criteri",
+ "servicePrincipalRadioAll": "Tutte le entità servizio possedute",
+ "servicePrincipalRadioSelect": "Seleziona entità servizio",
+ "servicePrincipalSelectionsAria": "Griglia delle entità servizio selezionate",
+ "servicePrincipalSelectorAria": "Elenco delle entità servizio selezionate",
+ "servicePrincipalSelectorMultiple": "{0} entità servizio selezionate",
+ "servicePrincipalSelectorSingle": "1 entità servizio selezionata",
+ "servicePrincipalSpecificExc": "Entità servizio specifiche escluse",
+ "servicePrincipalSpecificInc": "Entità servizio specifiche incluse",
+ "servicePrincipals": "Entità servizio",
+ "sessionControlBladeTitle": "Sessione",
+ "sessionControlDescriptionContent": "È possibile controllare l'accesso in base ai controlli della sessione per abilitare esperienze limitate entro applicazioni cloud specifiche.",
+ "sessionControlDisableInfo": "Questo controllo funziona solo con le app supportate. Attualmente Office 365, Exchange Online e SharePoint Online sono le uniche app cloud che supportano le restrizioni imposte dalle app. Fare clic qui per altre informazioni.",
+ "sessionControlInfoBallonText": "I controlli della sessione abilitano un'esperienza limitata in un'app cloud.",
+ "sessionControls": "Controlli della sessione",
+ "sessionControlsAppEnforcedLabel": "Usa restrizioni imposte dalle app",
+ "sessionControlsCasLabel": "Usa Controllo app per l'accesso condizionale",
+ "sessionControlsSecureSignInLabel": "Richiedi binding del token",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} inclusi",
+ "signinRiskReauth": "È necessario selezionare la condizione \"Rischio di accesso\" quando sono selezionati la concessione \"Richiedi l'autenticazione a più fattori\" e il controllo della sessione \"Frequenza di accesso ogni volta\"",
+ "signinRiskTriggerDescriptionContent": "Selezionare il livello di rischio di accesso",
+ "singleTenantServicePrincipalInfoBallonText": "Il criterio si applica solo alle singole entità servizio tenant di proprietà dell'organizzazione. Fare clic qui per altre informazioni ",
+ "specificSigninRiskLevelsOption": "Selezionare i livelli di rischio di accesso specifici",
+ "specificUsersExcluded": "utenti specifici esclusi",
+ "specificUsersIncluded": "Utenti specifici inclusi",
+ "specificUsersIncludedAndExcluded": "Utenti specifici esclusi e inclusi",
+ "startDatePickerLabel": "Inizia",
+ "startFreeTrial": "Avviare una versione di valutazione gratuita",
+ "startTimePickerLabel": "Ora di inizio",
+ "sunday": "Domenica",
+ "testButton": "What If",
+ "thumbprintCol": "Identificazione personale",
+ "thursday": "Giovedì",
+ "timeConditionAllTimesLabel": "In qualsiasi momento",
+ "timeConditionIntroText": "Configurare gli orari a cui verranno applicati i criteri",
+ "timeConditionSelectorInfoBallonContent": "Momento in cui l'utente esegue l'accesso. Ad esempio: \"Mercoledì 9:00 - 17:00 PST\"",
+ "timeConditionSelectorLabel": "Ora (anteprima)",
+ "timeConditionSpecificLabel": "Orari specifici",
+ "timeSelectorAllTimesText": "In qualsiasi momento",
+ "timeSelectorSpecificTimesText": "Orari specifici configurati",
+ "timeZoneDropdownInfoBalloonContent": "Selezionare un fuso orario che definisca l'intervallo di tempo. Questi criteri si applicano agli utenti in tutti i fusi orari. Ad esempio, 'Mercoledì 9:00 - 17:00' per un utente potrebbe essere 'Mercoledì 10:00 - 18:00' per un altro utente in un fuso orario diverso.",
+ "timeZoneDropdownLabel": "Fuso orario",
+ "timeZoneDropdownPlaceholderText": "Selezionare un fuso orario",
+ "tooManyPoliciesDescription": "Sono attualmente visualizzati solo i primi 50 criteri. Fare clic qui per visualizzarli tutti",
+ "tooManyPoliciesTitle": "Più di 50 criteri trovati",
+ "trustedLocationStatusIconDescription": "La posizione è considerata attendibile",
+ "trustedLocationStatusIconEnabled": "Icona dello stato attendibile",
+ "tuesday": "Martedì",
+ "uploadInBadState": "Non è possibile caricare il file specificato.",
+ "upsellAppsDescription": "È possibile richiedere l'autenticazione a più fattori per le applicazioni sensibili sempre oppure solo dall'esterno della rete aziendale.",
+ "upsellAppsTitle": "Proteggere le applicazioni",
+ "upsellBannerText": "Per accedere a questa funzionalità, usare una versione di valutazione gratuita Premium",
+ "upsellDataDescription": "È possibile richiedere che i dispositivi siano contrassegnati come conformi o aggiunti a Microsoft Entra ibrido per consentire l'accesso alle risorse aziendali.",
+ "upsellDataTitle": "Proteggere i dati",
+ "upsellDescription": "L'accesso condizionale garantisce il controllo e la protezione necessari per proteggere i dati aziendali, offrendo al contempo ai dipendenti un'esperienza che permette loro di svolgere il proprio lavoro al meglio e da qualsiasi dispositivo. Ad esempio, è possibile bloccare l'accesso dall'esterno della rete aziendale oppure bloccare l'accesso ai dispositivi che non soddisfano i requisiti di conformità.",
+ "upsellRiskDescription": "È possibile richiedere l’autenticazione a più fattori per gli eventi di rischio rilevati dal sistema di Machine Learning di Microsoft.",
+ "upsellRiskTitle": "Proteggersi dai rischi",
+ "upsellTitle": "Accesso condizionale",
+ "upsellWhyTitle": "Vantaggi dell'accesso condizionale",
+ "userAppNoneOption": "Nessuno",
+ "userNamePlaceholderText": "Immetti nome utente",
+ "userNotSetSeletorLabel": "0 utenti e gruppi selezionati",
+ "userOnlySelectionBladeExcludeDescription": "Selezionare i gruppi da escludere dai criteri",
+ "userOrGroupSelectionCountDiffBannerText": "{0} configurati in questo criterio sono stati eliminati dalla directory, ma questa operazione non influisce sugli altri utenti e gruppi nel criterio. Al successivo aggiornamento del criterio gli utenti e/o i gruppi eliminati verranno rimossi automaticamente.",
+ "userOrSPNotSetSelectorLabel": "0 utenti o identità dei carichi di lavoro selezionati",
+ "userOrSPSelectionBladeTitle": "Utenti o identità dei carichi di lavoro",
+ "userOrSPSelectorInfoBallonText": "Identità nella directory a cui si applicano i criteri, inclusi utenti, gruppi ed entità servizio",
+ "userRequired": "L'utente è obbligatorio",
+ "userRiskErrorBox": "È necessario selezionare la condizione \"Rischio utente\" quando è selezionata la concessione \"Richiedi modifica password\"",
+ "userRiskReauth": "Deve essere selezionata la condizione \"Rischio utente\" e non \"Rischio di accesso\" quando sono selezionati la concessione \"Richiedi modifica della password\" e il controllo della sessione \"Frequenza di accesso ogni volta\"",
+ "userSPRequired": "Utente o entità servizio obbligatori",
+ "userSPSelectorTitle": "Utente o identità del carico di lavoro",
+ "userSelectionBladeAllUsersAndGroups": "Tutti gli utenti e i gruppi",
+ "userSelectionBladeExcludeDescription": "Selezionare gli utenti e i gruppi da escludere dai criteri",
+ "userSelectionBladeExcludeTabTitle": "Escludi",
+ "userSelectionBladeExcludedSelectorTitle": "Selezionare gli utenti e i gruppi esclusi",
+ "userSelectionBladeIncludeDescription": "Selezionare gli utenti a qui verranno applicati i criteri",
+ "userSelectionBladeIncludeTabTitle": "Includi",
+ "userSelectionBladeIncludedSelectorTitle": "Seleziona",
+ "userSelectionBladeSelectUsers": "Seleziona utenti",
+ "userSelectionBladeSelectedUsers": "Seleziona utenti e gruppi",
+ "userSelectionBladeTitle": "Utenti e gruppi",
+ "userSelectorBladeTitle": "Utenti",
+ "userSelectorExcluded": "{0} esclusi",
+ "userSelectorGroupPlural": "{0} gruppi",
+ "userSelectorGroupSingular": "1 gruppo",
+ "userSelectorIncluded": "{0} inclusi",
+ "userSelectorInfoBallonText": "Utenti e gruppi nella directory a cui si applicano i criteri. Ad esempio, 'Gruppo pilota'",
+ "userSelectorSelected": "{0} selezionati",
+ "userSelectorTitle": "Utente",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} utenti",
+ "userSelectorUserSingular": "1 utente",
+ "userSelectorWithExclusion": "{0} e {1}",
+ "usersGroupsLabel": "Utenti e gruppi",
+ "viewApprovedAppsText": "Visualizza l'elenco di app client approvate",
+ "viewCompliantAppsText": "Visualizza l'elenco di app client protette da criteri",
+ "viewPolicyInformation": "Visualizza informazioni sui criteri",
+ "vpnBladeTitle": "Connettività VPN",
+ "vpnCertCreateFailedMessage": "Errore: {0}",
+ "vpnCertCreateFailedTitle": "Impossibile creare {0}",
+ "vpnCertCreateInProgressTitle": "Creazione del tipo di risorsa {0}",
+ "vpnCertCreateSuccessMessage": "La creazione di {0} è riuscita.",
+ "vpnCertCreateSuccessTitle": "La creazione di {0} è riuscita",
+ "vpnCertNoRowsMessage": "Non sono stati trovati certificati VPN",
+ "vpnCertUpdateFailedMessage": "Errore: {0}",
+ "vpnCertUpdateFailedTitle": "Non è stato possibile aggiornare {0}",
+ "vpnCertUpdateInProgressTitle": "Aggiornamento di {0}",
+ "vpnCertUpdateSuccessMessage": "L'aggiornamento di {0} è stato completato.",
+ "vpnCertUpdateSuccessTitle": "L'aggiornamento di {0} è stato completato",
+ "vpnFeatureInfo": "Per altre informazioni sulla connettività VPN e l'accesso condizionale, fare clic qui.",
+ "vpnFeatureWarning": "Dopo la creazione di un certificato VPN nel portale, Microsoft Entra ID inizierà a usarlo immediatamente per rilasciare certificati di breve durata per il client VPN. È essenziale che il certificato VPN venga distribuito immediatamente nel server VPN per evitare problemi relativi alla convalida delle credenziali del client VPN.",
+ "vpnMenuText": "Connettività VPN",
+ "vpncertDropdownDefaultOption": "Durata",
+ "vpncertDropdownInfoBalloonContent": "Selezionare la durata per il certificato da creare",
+ "vpncertDropdownLabel": "Seleziona durata",
+ "vpncertDropdownOneyearOption": "1 anno",
+ "vpncertDropdownThreeyearOption": "3 anni",
+ "vpncertDropdownTwoyearOption": "2 anni",
+ "wednesday": "Mercoledì",
+ "whatIfCountry": "Paese/area geografica",
+ "whatIfCountryInfo": "Paese/area geografica da cui l'utente esegue l'accesso.",
+ "whatIfDevicePlatformInfo": "Piattaforma del dispositivo da cui l'utente esegue l'accesso.",
+ "whatIfEnterIpAddress": "Immettere l'indirizzo IP (ad esempio: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "Specificato un indirizzo IP non valido.",
+ "whatIfIpAddress": "Indirizzo IP",
+ "whatIfIpAddressInfo": "Indirizzo IP da cui l'utente esegue l'accesso.",
+ "whatIfIpCountryInfoBoxText": "Se si usa un indirizzo IP o un paese/area geografica, entrambi i campi sono obbligatori e devono essere associati correttamente.",
+ "whatIfSelectCountry": "Selezionare un paese/area geografica...",
+ "whatIfSelectDevicePlatform": "Seleziona piattaforma dispositivo...",
+ "whatIfSelectPrivateLink": "Selezionare collegamento privato...",
+ "whatIfSelectSignInRisk": "Seleziona rischio di accesso...",
+ "whatIfSignInRisk": "Rischio di accesso",
+ "whatIfSignInRiskInfo": "Livello di rischio associato all'accesso",
+ "whatIfUnknownAreas": "Aree sconosciute",
+ "windows365InfoBox": "La selezione di Windows 365 influirà sulle connessioni ai Cloud PC e agli host di sessione di Desktop virtuale Azure. Fare clic qui per altre informazioni.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Identità dei carichi di lavoro (anteprima)",
+ "workloadIdentitiesLicenseText": "Per modificare questo criterio, è necessaria una licenza Premium P1 o P2 delle identità del carico di lavoro.",
+ "workloadIdentity": "Identità del carico di lavoro"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Panoramica"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Cerca per dispositivo, utente o versione dell'aggiornamento qualitativo."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Non è stato possibile caricare i profili di aggiornamento software iOS"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Profilo di aggiornamento iOS",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profilo"
+ },
+ "listLoadError": "Non è possibile caricare i profili di aggiornamento software iOS. Riprovare più tardi",
+ "lowercase": "Criteri di aggiornamento per iOS",
+ "uppercase": "Criteri di aggiornamento per iOS"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Non è possibile connettersi ad Apple per ottenere l'elenco di versioni disponibili. Riprovare più tardi o continuare con la versione più recente.",
+ "latestUpdate": "Aggiornamento più recente",
+ "noLongerSupported": "La versione selezionata non è più supportata",
+ "olderVersionSelected": "Poiché è stata selezionata una versione precedente, assicurarsi di applicare un criterio di limitazione del dispositivo che posticipa la visibilità degli aggiornamenti software, in modo che i dispositivi non possano eseguire l'aggiornamento alla versione più recente.",
+ "prefix": "Installa iOS/iPadOS",
+ "selectSupported": "Selezionare la versione dell'aggiornamento supportata da Apple",
+ "updateToInstall": "Aggiornamento da installare"
+ },
+ "Schedule": {
+ "always": "Aggiorna alla sincronizzazione successiva",
+ "duringTimeWindows": "Aggiorna durante l'orario pianificato",
+ "header": "Per impostazione predefinita, quando un criterio di aggiornamento viene assegnato a un dispositivo, Intune distribuisce gli aggiornamenti più recenti al momento dell'archiviazione del dispositivo. È invece possibile creare una pianificazione settimanale con ore di inizio e fine personalizzate. Se si sceglie di eseguire l'aggiornamento al di fuori dell'ora pianificata, Intune non distribuirà gli aggiornamenti fino al termine dell'ora pianificata.",
+ "infoBalloon": "Orario in cui verranno eseguiti gli aggiornamenti. Per pianificare aggiornamenti durante o all'esterno degli orari pianificati è necessario input aggiuntivo.",
+ "label": "Tipo di pianificazione",
+ "outsideActiveHours": "Aggiorna all'esterno dell'orario di attività (legacy)",
+ "outsideTimeWindows": "Aggiorna in orari diversi da quello pianificato",
+ "timeWindow": "Intervallo di tempo",
+ "timeZone": "Fuso orario",
+ "title": "Aggiorna le impostazioni di pianificazione dei criteri:",
+ "weekly": "Pianificazione settimanale",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "Versione di iOS/iPadOS da installare nei dispositivi durante l'aggiornamento.",
+ "label": "Selezionare la versione da installare"
+ },
+ "header": "Creare un profilo per imporre l'installazione automatica degli aggiornamenti più recenti per iOS/iPadOS nei dispositivi assegnati. Queste impostazioni determinano come e quando vengono distribuiti gli aggiornamenti software. Questo profilo non impedisce agli utenti di aggiornare manualmente il sistema operativo. È possibile impedire tale aggiornamento per al massimo 90 giorni con un criterio di restrizione di Configurazione del dispositivo. Gli aggiornamenti verranno applicati solo ai dispositivi supervisionati.",
+ "notAvailable": "N/D"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Non sono presenti criteri di aggiornamento per iOS da visualizzare",
+ "macOsUpdates": "Non sono presenti criteri di aggiornamento per il software macOS da visualizzare",
+ "windowsUpdates": "Non sono presenti anelli di aggiornamento da visualizzare per Windows 10 e versioni successive."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Nome dispositivo",
+ "deviceUpdateStatus": "Stato di aggiornamento del dispositivo",
+ "lastUpdated": "Ultimo aggiornamento",
+ "osVersion": "Versione del sistema operativo",
+ "userPrincipalName": "Nome utente"
+ },
+ "maximumOSVersionFilter": "Versione massima del sistema operativo",
+ "minimumOSVersionFilter": "Versione minima del sistema operativo",
+ "noData": "Nessun dato da visualizzare",
+ "searchBoxPlaceholder": "Cerca in base a nome del dispositivo, nome utente o versione del sistema operativo",
+ "title": "Riepilogo account per dispositivi macOS"
+ },
+ "Category": {
+ "configurationDataFile": "File di dati di configurazione",
+ "critical": "Critico",
+ "firmware": "Firmware",
+ "other": "Altro"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Ultimo aggiornamento",
+ "successfulUpdateCount": "Aggiornamenti distribuiti correttamente",
+ "totalUpdateCount": "Totale aggiornamenti distribuiti",
+ "updateCategory": "Categoria di aggiornamento",
+ "updateCategoryStatus": "Stato della categoria di aggiornamento"
+ },
+ "noData": "Nessun dato da visualizzare"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Non è stato possibile caricare i profili di aggiornamento software macOS"
+ }
+ },
+ "State": {
+ "available": "Disponibili",
+ "commandFailed": "Il comando non è riuscito",
+ "downloadFailed": "Download non riuscito",
+ "downloadInsufficientNetwork": "La rete è insufficiente per il download",
+ "downloadInsufficientPower": "L'alimentazione non è sufficiente per il download",
+ "downloadInsufficientSpace": "Lo spazio non è sufficiente per il download",
+ "downloaded": "Download completato",
+ "downloading": "Download in corso",
+ "idle": "Inattivo",
+ "installFailed": "Installazione non riuscita",
+ "installInsufficientPower": "L'alimentazione non è sufficiente per l'installazione",
+ "installInsufficientSpace": "Lo spazio non è sufficiente per l'installazione",
+ "installing": "Installazione",
+ "scheduled": "Pianificata",
+ "success": "Operazione riuscita",
+ "unknown": "Sconosciuto"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Ultimo aggiornamento",
+ "updateName": "Nome aggiornamento",
+ "updateStatus": "Stato aggiornamento",
+ "version": "Versione"
+ },
+ "noData": "Nessun dato da visualizzare",
+ "searchBoxPlaceholder": "Cerca in base a nome o versione dell'aggiornamento"
+ },
+ "SummaryBlade": {
+ "subtitle": "Profilo di aggiornamento macOS",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profilo"
+ },
+ "error": "Errore",
+ "errorOrErrors": "Errori",
+ "errors": "Errori",
+ "listLoadError": "Non è possibile caricare i profili di aggiornamento software macOS. Riprovare più tardi",
+ "lowercase": "Criteri di aggiornamento macOs",
+ "other": "Altro",
+ "subtitle": "Aggiornamento software MacOS",
+ "upToDate": "Aggiornato",
+ "uppercase": "Criteri di aggiornamento macOS"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Riprovare più tardi",
+ "title": "Non è stato possibile eliminare {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Riprovare più tardi"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Riprovare più tardi",
+ "title": "Non è stato possibile caricare {0}"
+ },
+ "idWrongFormat": "Il formato dell'ID specificato per il profilo non corrisponde a quello previsto."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "È necessario selezionare almeno una finestra temporale",
+ "tooMany": "È possibile configurare al massimo 20 finestre temporali"
+ }
+ },
+ "endDay": "Fine della giornata",
+ "endTime": "Ora di fine",
+ "startDay": "Inizio della giornata",
+ "startTime": "Ora di inizio",
+ "timeWindowError": "Scegliere un intervallo di tempo che copre almeno un'ora."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Non è stato possibile caricare i profili dell'anello di aggiornamento per Windows 10 e versioni successive."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Anello di aggiornamento per Windows 10 e versioni successive",
+ "title": "Windows Update per le aziende"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 e versioni successive",
+ "title": "Anello di aggiornamento per Windows 10 e versioni successive"
+ },
+ "listLoadError": "Non è possibile caricare i profili degli anelli di aggiornamento per Windows 10 e versioni successive, riprovare più tardi",
+ "lowercase": "Fase di aggiornamento",
+ "uppercase": "Fase di aggiornamento"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Aggiorna le impostazioni del criterio",
+ "updateRingSettings": "Impostazioni per la fase di aggiornamento"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Crea {0}",
+ "edit": "Modifica {0}"
+ }
+ },
+ "notScannedYet": "Non ancora analizzato",
+ "outOfDateIosDevices": "Dispositivi iOS non aggiornati"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge versione 77 e successive",
+ "storeApp": "App dello Store",
+ "office365Suite": "App di Microsoft 365",
+ "microsoftDefenderATP": "Microsoft Defender per endpoint",
+ "other": "Altro",
+ "webApplication": "Applicazione Web"
+ },
+ "Filters": {
+ "ruleSyntax": "Sintassi delle regole",
+ "filters": "Filtri"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Selezionare uno script di individuazione",
+ "scriptFileLabel": "Selezionare lo script di individuazione"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Se questa opzione è abilitata, i dispositivi devono essere conformi alle regole personalizzate definite in un file JSON in base ai dati personalizzati restituiti da uno script PowerShell di individuazione.",
+ "label": "La conformità personalizzata è attualmente disponibile in versione anteprima. Una volta entrata nella fase di disponibilità generale, sarà possibile aggiungerla con un costo aggiuntivo alle opzioni di licenza che includono Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Script",
+ "placeholder": "Fare clic per selezionare",
+ "searchboxPlaceholder": "Cerca per nome dello script",
+ "title": "Selezionare uno script di individuazione"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Riepilogo delle regole di conformità personalizzate"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Caricare e convalidare il file JSON con le impostazioni di conformità personalizzate",
+ "noFileSelectedError": "Selezionare un file JSON",
+ "parseFileSelectedError": "Il file JSON non è valido"
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Configurare i requisiti per PIN e credenziali che gli utenti devono soddisfare per accedere alle app in un contesto aziendale."
+ },
+ "DataProtection": {
+ "infoText": "Questo gruppo include i controlli di prevenzione della perdita dei dati, ad esempio restrizioni per operazioni di tipo taglia, copia, incolla e salva con nome. Queste impostazioni determinano il modo in cui gli utenti interagiscono con i dati nelle app."
+ },
+ "DeviceTypes": {
+ "selectOne": "Selezionare almeno un tipo di dispositivo."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Specifica come destinatari le app in tutti i tipi di dispositivo"
+ },
+ "infoText": "Scegliere come si vuole applicare questo criterio alle app in dispositivi diversi. Quindi, aggiungere almeno un'app.",
+ "selectOne": "Selezionare almeno un'app per creare un criterio."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender per endpoint",
+ "androidDeviceOwnerApplications": "Applicazioni",
+ "androidDeviceOwnerPolicyMessages": "Informazioni sul supporto personalizzate",
+ "androidForWorkPassword": "Password per il dispositivo",
+ "appManagement": "Consenti o blocca le app",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "App con restrizioni",
+ "applicationVisibility": "Mostra o nascondi le app",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, visualizzazione documenti, giochi",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "App ed esperienza",
+ "associatedDomains": "Domini associati",
+ "autonomousSingleAppMode": "Modalità applicazione singola autonoma",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Crittografia di Windows",
+ "bootOptions": "Opzioni di avvio",
+ "browser": "Browser",
+ "builtinApps": "App predefinite",
+ "cameras": "Fotocamere",
+ "cellular": "Rete cellulare",
+ "cloudAndStorage": "Cloud e risorse di archiviazione",
+ "cloudPrint": "Stampante cloud",
+ "complianceEmailProfile": "Posta elettronica",
+ "connectedDevices": "Dispositivi connessi",
+ "connectivity": "Rete cellulare e connettività",
+ "contentCaching": "Memorizzazione nella cache dei contenuti",
+ "controlPanelAndSettings": "Pannello di controllo e impostazioni",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Conformità personalizzata",
+ "customConfiguration": "Profilo di configurazione personalizzato",
+ "customOMASettings": "Impostazioni OMA-URI personalizzate",
+ "customPreferences": "File delle preferenze",
+ "dFCISecuritySettings": "Impostazioni di sicurezza",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows Firewall",
+ "defenderLocalSecurityOptions": "Opzioni di sicurezza per i dispositivi locali",
+ "defenderSecurityCenter": "Microsoft Defender Security Center",
+ "deliveryOptimization": "Ottimizzazione recapito",
+ "derivedCredentialAuthenticationConfiguration": "Credenziale derivata",
+ "deviceExperience": "Esperienza del dispositivo",
+ "deviceFirmwareConfigurationInterface": "Interfaccia di configurazione del firmware del dispositivo",
+ "deviceGuard": "Controllo di applicazioni di Microsoft Defender",
+ "deviceHealth": "Integrità del dispositivo",
+ "devicePassword": "Password per il dispositivo",
+ "deviceProperties": "Proprietà del dispositivo",
+ "deviceRestrictions": "Generale",
+ "deviceSecurity": "Sicurezza del sistema",
+ "display": "Visualizza",
+ "domainJoin": "Aggiunta a un dominio",
+ "domains": "Domini",
+ "edgeBrowser": "Microsoft Edge legacy (versione 45 e precedenti)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Modalità tutto schermo di Microsoft Edge",
+ "editionUpgrade": "Aggiornamento edizione",
+ "education": "Istruzione",
+ "educationDeviceCerts": "Certificati del dispositivo",
+ "educationStudentCerts": "Certificati per studenti",
+ "educationTakeATest": "Test ed esami",
+ "educationTeacherCerts": "Certificati per docenti",
+ "emailProfile": "Posta elettronica",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Estensione dell'app per l'accesso Single Sign-On",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Giochi",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Monitoraggio dello stato",
+ "homeScreenLayout": "Layout della schermata iniziale",
+ "iOSWallpaper": "Sfondo",
+ "importedPFX": "Certificato PKCS importato",
+ "iosDefenderAtp": "Microsoft Defender per endpoint",
+ "iosKiosk": "Tutto schermo",
+ "kernelExtensions": "Estensioni del kernel",
+ "keyboardAndDictionary": "Tastiera e dizionario",
+ "kiosk": "Tutto schermo",
+ "kioskAndroidEnterprise": "Dispositivi dedicati",
+ "kioskConfiguration": "Tutto schermo",
+ "kioskConfigurationV2": "Tutto schermo",
+ "kioskWebBrowser": "Web browser in modalità tutto schermo",
+ "lockScreenMessage": "Messaggio della schermata di blocco",
+ "lockedScreenExperience": "Esperienza della schermata bloccata",
+ "logging": "Creazione di report e telemetria",
+ "loginItems": "Elementi di accesso",
+ "loginWindow": "Finestra di accesso",
+ "macDefenderAtp": "Microsoft Defender per endpoint",
+ "maintenance": "Manutenzione",
+ "malware": "Malware",
+ "messaging": "Messaggistica",
+ "microphonesAndSpeakers": "Microfoni e altoparlanti",
+ "networkBoundary": "Limite di rete",
+ "networkProxy": "Proxy di rete",
+ "notifications": "Notifiche dell'app",
+ "pKCS": "Certificato PKCS",
+ "password": "Password",
+ "personalProfile": "Profilo personale",
+ "personalization": "Personalizzazione",
+ "policyOverride": "Esegui l'override dei criteri di gruppo",
+ "ports": "Porte",
+ "powerSettings": "Impostazioni risparmio energia",
+ "printer": "Stampante",
+ "privacy": "Riservatezza",
+ "privacyPerApp": "Eccezioni alla privacy per app",
+ "privacyPreferences": "Preferenze per la privacy",
+ "projection": "Proiezione",
+ "radios": "Radio",
+ "sCCMCompliance": "Conformità di Configuration Manager",
+ "sCEP": "Certificato SCEP",
+ "sCEPProperties": "Certificato SCEP",
+ "sMode": "Cambio di modalità (solo Windows Insider)",
+ "safari": "Safari",
+ "search": "Cerca",
+ "session": "Sessione",
+ "sharedDevice": "iPad condiviso",
+ "sharedPCAccountManager": "Dispositivo multiutente condiviso",
+ "singleSignOn": "Single Sign-On",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Impostazioni",
+ "start": "Avvia",
+ "systemExtensions": "Estensioni del sistema",
+ "systemSecurity": "Sicurezza del sistema",
+ "trustedCert": "Certificato attendibile",
+ "uEFIAccess": "Accesso UEFI",
+ "updates": "Aggiornamenti",
+ "userRights": "Diritti utente",
+ "usersAndAccounts": "Utenti e account",
+ "vPN": "VPN di base",
+ "vPNApps": "VPN automatico",
+ "vPNAppsAndTrafficRules": "Regole delle app e del traffico",
+ "vPNConditionalAccess": "Accesso condizionale",
+ "vPNConnectivity": "Connettività",
+ "vPNDNSTriggers": "Impostazioni DNS",
+ "vPNIKEv2": "Impostazioni IKEv2",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Split tunneling",
+ "vPNTrustedNetwork": "Rilevamento della rete attendibile",
+ "wakeSettings": "Impostazioni di riattivazione",
+ "webContentFilter": "Filtro contenuto Web",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender per endpoint",
+ "windowsDefenderATP": "Microsoft Defender per endpoint",
+ "windowsHelloForBusiness": "Windows Hello for Business",
+ "windowsSpotlight": "Windows Spotlight",
+ "wiredNetwork": "Rete cablata",
+ "wireless": "Wireless",
+ "wirelessProjection": "Proiezione wireless",
+ "workProfile": "Impostazioni del profilo di lavoro",
+ "workProfilePassword": "Password del profilo di lavoro",
+ "xboxServices": "Servizi Xbox",
+ "zebraMx": "Profilo MX (solo Zebra)",
+ "complianceActionsLabel": "Azioni per la non conformità"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "URL consentiti",
+ "tooltip": "Specificare i siti a cui gli utenti sono autorizzati ad accedere entro il rispettivo contesto di lavoro. Non saranno consentiti altri siti. È possibile scegliere di configurare un elenco di siti consentiti/bloccati, ma non entrambi i tipi di siti. "
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Proxy dell'applicazione",
+ "title": "Reindirizzamento del proxy applicazione",
+ "tooltip": "Abilitare il reindirizzamento del proxy app per fornire agli utenti l'accesso ai collegamenti aziendali e alle app Web locali."
+ },
+ "BlockedURLs": {
+ "title": "URL bloccati",
+ "tooltip": "Specificare i siti bloccati per gli utenti entro il rispettivo contesto di lavoro. Tutti gli altri siti saranno consentiti. È possibile scegliere di configurare un elenco di siti consentiti/bloccati, ma non entrambi i tipi di siti. "
+ },
+ "Bookmarks": {
+ "header": "Segnalibri gestiti",
+ "tooltip": "Immettere un elenco di URL aggiunti ai segnalibri in modo che siano disponibili per gli utenti durante l'uso di Microsoft Edge nel rispettivo contesto di lavoro.",
+ "uRL": "URL"
+ },
+ "HomepageURL": {
+ "header": "Home page gestita",
+ "title": "URL del collegamento della home page",
+ "tooltip": "Configurare un collegamento della home page che verrà visualizzato agli utenti come prima icona sotto la barra di ricerca all'apertura di una nuova scheda in Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Reindirizza i siti con restrizioni al contesto personale",
+ "tooltip": "Specificare se gli utenti sono autorizzati a eseguire la transizione al contesto personale per aprire siti con restrizioni."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "SKU di Windows Home",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Selezionare il numero di bit contenuti nella chiave.",
- "keyUsage": "Specificare l'azione crittografica necessaria per lo scambio della chiave pubblica del certificato.",
- "renewalThreshold": "Immettere la percentuale (tra 1 e 99 percento) della durata rimanente del certificato consentita prima che un dispositivo possa richiedere il rinnovo del certificato. Il valore consigliato in Intune è 20%. (1-99)",
- "rootCert": "Scegliere un profilo di certificato della CA radice configurato e assegnato in precedenza. Il certificato della CA deve corrispondere al certificato radice della CA che rilascia il certificato per questo profilo, ovvero per il profilo attualmente in fase di configurazione.",
- "scepServerUrl": "Immettere un URL per il server NDES che rilascia certificati tramite SCEP. L'URL deve essere di tipo HTTPS, ad esempio, https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Aggiungere uno o più URL per il server NDES che rilascia certificati tramite SCEP. L'URL deve essere di tipo HTTPS, ad esempio, https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Nome alternativo del soggetto",
- "subjectNameFormat": "Formato nome soggetto",
- "validityPeriod": "Quantità di tempo rimanente prima della scadenza del certificato. Immettere un valore uguale o inferiore al periodo di validità indicato nel modello di certificato. L'impostazione predefinita è un anno."
- },
- "appInstallContext": "Specifica il contesto di installazione da associare all'app. Per le app a modalità doppia, selezionare il contesto da usare per l'app. Per tutte le altre app l'opzione è preselezionata in base al pacchetto e non può essere modificata.",
- "autoUpdateMode": "Configurare la priorità di aggiornamento per l'app. Selezionare Impostazione predefinita per richiedere che il dispositivo sia connesso al WiFi, che sia in carica e che non sia attivamente in uso prima di aggiornare l'app. Seleziona Priorità alta per aggiornare l'app non appena lo sviluppatore ha pubblicato l'app, indipendentemente dallo stato di addebito, dalla funzionalità WiFi o dall'attività dell'utente finale nel dispositivo. Selezionare Posponi per la revoca degli aggiornamenti dell'app per un massimo di 90 giorni. La priorità alta e il posticipo avranno effetto solo sui dispositivi DO.",
- "configurationSettingsFormat": "Testo del formato delle impostazioni di configurazione",
- "ignoreVersionDetection": "Impostare questa opzione su \"Sì\" per le app aggiornate automaticamente dallo sviluppatore dell'app, ad esempio Google Chrome.",
- "ignoreVersionDetectionMacOSLobApp": "Selezionare \"Sì\" per le app che vengono caricate automaticamente dallo sviluppatore dell'app o per verificare solo il valore bundleID dell'app prima dell'installazione. Selezionare \"No\" per verificare il valore bundleID e il numero di versione prima dell'installazione.",
- "installAsManagedMacOSLobApp": "Questa impostazione è applicabile solo a macOS 11 e versioni successive. L'app verrà installata ma non gestita in macOS 10.15 e versioni precedenti.",
- "installContextDropdown": "Selezionare il contesto di installazione appropriato. Il contesto utente installerà l'app solo per l'utente interessato mentre il contesto di dispositivo installerà l'app per tutti gli utenti nel dispositivo.",
- "ldapUrl": "Nome host LDAP in cui i client possono ottenere le chiavi di crittografia pubbliche per i destinatari dei messaggi di posta elettronica. I messaggi verranno crittografati quando è disponibile una chiave. Formati supportati:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Selezionare le autorizzazioni di runtime per l'app associata.",
- "policyAssociatedApp": "Selezionare l'app a cui verrà associato questo criterio.",
- "policyConfigurationSettings": "Selezionare il metodo da usare per definire le impostazioni di configurazione per questo criterio.",
- "policyDescription": "Immettere facoltativamente una descrizione per questo criterio di configurazione.",
- "policyEnrollmentType": "Scegliere se queste impostazioni vengono gestite tramite la gestione dei dispositivi o tramite app create con Intune SDK.",
- "policyName": "Immettere un nome per questo criterio di configurazione.",
- "policyPlatform": "Selezionare la piattaforma a cui verrà applicato questo criterio di configurazione dell'app.",
- "policyProfileType": "Selezionare i tipi di profilo del dispositivo a cui verrà applicato questo profilo di configurazione dell'app",
- "policySMime": "Configurare le impostazioni per la firma e la crittografia S/MIME per Outlook.",
- "sMimeDeployCertsFromIntune": "Specificare se i certificati S/MIME verranno recapitati o meno da Intune per l'uso con Outlook.\r\nIntune può distribuire automaticamente certificati di firma e di crittografia agli utenti tramite il Portale aziendale.",
- "sMimeEnable": "Specificare se i controlli S/MIME sono abilitati o meno durante la composizione di un messaggio di posta elettronica",
- "sMimeEnableAllowChange": "Specificare se l'utente è autorizzato a modificare l'impostazione Abilita S/MIME.",
- "sMimeEncryptAllEmails": "Specificare se tutti i messaggi di posta elettronica devono essere crittografati o meno.\r\nLa crittografia converte i dati in testo crittografato in modo che possano essere letti solo dal destinatario previsto.",
- "sMimeEncryptAllEmailsAllowChange": "Specificare se l'utente è autorizzato a modificare l'impostazione Crittografa tutti i messaggi di posta elettronica.",
- "sMimeEncryptionCertProfile": "Specificare il profilo del certificato per la crittografia della posta elettronica.",
- "sMimeSignAllEmails": "Specificare se tutti i messaggi di posta elettronica devono essere firmati o meno.\r\nUna firma digitale verifica l'autenticità del messaggio di posta elettronica e assicura che i contenuti non siano stati manomessi durante il transito.",
- "sMimeSignAllEmailsAllowChange": "Specificare se l'utente è autorizzato a modificare l'impostazione Firma tutti i messaggi di posta elettronica.",
- "sMimeSigningCertProfile": "Specificare il profilo del certificato per la firma della posta elettronica.",
- "sMimeUserNotificationType": "Metodo per segnalare agli utenti che è necessario aprire il Portale aziendale per recuperare certificati S/MIME per Outlook."
- },
+ "Languages": {
+ "ar-aE": "Arabo (Emirati Arabi Uniti)",
+ "ar-bH": "Arabo (Bahrein)",
+ "ar-dZ": "Arabo (Algeria)",
+ "ar-eG": "Arabo (Egitto)",
+ "ar-iQ": "Arabo (Iraq)",
+ "ar-jO": "Arabo (Giordania)",
+ "ar-kW": "Arabo (Kuwait)",
+ "ar-lB": "Arabo (Libano)",
+ "ar-lY": "Arabo (Libia)",
+ "ar-mA": "Arabo (Marocco)",
+ "ar-oM": "Arabo (Oman)",
+ "ar-qA": "Arabo (Qatar)",
+ "ar-sA": "Arabo (Arabia Saudita)",
+ "ar-sY": "Arabo (Siria)",
+ "ar-tN": "Arabo (Tunisia)",
+ "ar-yE": "Arabo (Yemen)",
+ "az-cyrl": "Azerbaigiano (alfabeto cirillico, Azerbaigian)",
+ "az-latn": "Azerbaigiano (alfabeto latino, Azerbaigian)",
+ "bn-bD": "Bengali (Bangladesh)",
+ "bn-iN": "Bengali (India)",
+ "bs-cyrl": "Bosniaco (alfabeto cirillico)",
+ "bs-latn": "Bosniaco (alfabeto latino)",
+ "zh-cN": "Cinese (RPC)",
+ "zh-hK": "Cinese (RAS di Hong Kong)",
+ "zh-mO": "Cinese (RAS di Macao)",
+ "zh-sG": "Cinese (Singapore)",
+ "zh-tW": "Cinese (Taiwan)",
+ "hr-bA": "Croato (alfabeto latino)",
+ "hr-hR": "Croato (Croazia)",
+ "nl-bE": "Olandese (Belgio)",
+ "nl-nL": "Olandese (Paesi Bassi)",
+ "en-aU": "Inglese (Australia)",
+ "en-bZ": "Inglese (Belize)",
+ "en-cA": "Inglese (Canada)",
+ "en-cabn": "Inglese (Caraibi)",
+ "en-iE": "Inglese (Irlanda)",
+ "en-iN": "Inglese (India)",
+ "en-jM": "Inglese (Giamaica)",
+ "en-mY": "Inglese (Malaysia)",
+ "en-nZ": "Inglese (Nuova Zelanda)",
+ "en-pH": "Inglese (Repubblica delle Filippine)",
+ "en-sG": "Inglese (Singapore)",
+ "en-tT": "Inglese (Trinidad e Tobago)",
+ "en-uK": "Inglese (Regno Unito)",
+ "en-uS": "Inglese (Stati Uniti)",
+ "en-zA": "Inglese (Sudafrica)",
+ "en-zW": "Inglese (Zimbabwe)",
+ "fr-bE": "Francese (Belgio)",
+ "fr-cA": "Francese (Canada)",
+ "fr-cH": "Francese (Svizzera)",
+ "fr-fR": "Francese (Francia)",
+ "fr-lU": "Francese (Lussemburgo)",
+ "fr-mC": "Francese (Monaco)",
+ "de-aT": "Tedesco (Austria)",
+ "de-cH": "Tedesco (Svizzera)",
+ "de-dE": "Tedesco (Germania)",
+ "de-lI": "Tedesco (Liechtenstein)",
+ "de-lU": "Tedesco (Lussemburgo)",
+ "iu-cans": "Inuktitut (alfabeto sillabico, Canada)",
+ "iu-latn": "Inuktitut (alfabeto latino, Canada)",
+ "it-cH": "Italiano (Svizzera)",
+ "it-iT": "Italiano (Italia)",
+ "ms-bN": "Malese (Brunei Darussalam)",
+ "ms-mY": "Malese (Malaysia)",
+ "mn-cN": "Mongolo (mongolo tradizionale, Repubblica popolare cinese)",
+ "mn-mN": "Mongolo (alfabeto cirillico, Mongolia)",
+ "no-nB": "Norvegese, bokmål (Norvegia)",
+ "no-nn": "Norvegese, Nynorsk (Norvegia)",
+ "pt-bR": "Portoghese (Brasile)",
+ "pt-pT": "Portoghese (Portogallo)",
+ "quz-bO": "Quechua (Bolivia)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Perù)",
+ "smj-nO": "Sami, Lule (Norvegia)",
+ "smj-sE": "Sami, Lule (Svezia)",
+ "se-fI": "Sami settentrionale (Finlandia)",
+ "se-nO": "Sami settentrionale (Norvegia)",
+ "se-sE": "Sami settentrionale (Svezia)",
+ "sma-nO": "Sami meridionale (Norvegia)",
+ "sma-sE": "Sami meridionale (Svezia)",
+ "smn": "Sami, Inari (Finlandia)",
+ "sms": "Sami, Skolt (Finlandia)",
+ "sr-Cyrl-bA": "Serbo (alfabeto cirillico)",
+ "sr-Cyrl-rS": "Serbo (alfabeto cirillico) (Serbia e Montenegro (ex))",
+ "sr-Latn-bA": "Serbo (alfabeto latino)",
+ "sr-Latn-rS": "Serbo (alfabeto latino, Serbia)",
+ "dsb": "Basso sorabo (Germania)",
+ "hsb": "Alto sorabo (Germania)",
+ "es-es-tradnl": "Spagnolo (Spagna, ordinamento tradizionale)",
+ "es-aR": "Spagnolo (Argentina)",
+ "es-bO": "Spagnolo (Bolivia)",
+ "es-cL": "Spagnolo (Cile)",
+ "es-cO": "Spagnolo (Colombia)",
+ "es-cR": "Spagnolo (Costa Rica)",
+ "es-dO": "Spagnolo (Repubblica Dominicana)",
+ "es-eC": "Spagnolo (Ecuador)",
+ "es-eS": "Spagnolo (Spagna)",
+ "es-gT": "Spagnolo (Guatemala)",
+ "es-hN": "Spagnolo (Honduras)",
+ "es-mX": "Spagnolo (Messico)",
+ "es-nI": "Spagnolo (Nicaragua)",
+ "es-pA": "Spagnolo (Panama)",
+ "es-pE": "Spagnolo (Perù)",
+ "es-pR": "Spagnolo (Portorico)",
+ "es-pY": "Spagnolo (Paraguay)",
+ "es-sV": "Spagnolo (El Salvador)",
+ "es-uS": "Spagnolo (Stati Uniti)",
+ "es-uY": "Spagnolo (Uruguay)",
+ "es-vE": "Spagnolo (Venezuela)",
+ "sv-fI": "Svedese (Finlandia)",
+ "uz-cyrl": "Uzbeko (alfabeto cirillico, Uzbekistan)",
+ "uz-latn": "Uzbeco (alfabeto latino, Uzbekistan)",
+ "af": "Afrikaans (Sudafrica)",
+ "sq": "Albanese (Albania)",
+ "am": "Amarico (Etiopia)",
+ "hy": "Armeno (Armenia)",
+ "as": "Assamese (India)",
+ "ba": "Baschiro (Russia)",
+ "eu": "Basco (Basco)",
+ "be": "Bielorusso (Bielorussia)",
+ "br": "Bretone (Francia)",
+ "bg": "Bulgaro (Bulgaria)",
+ "ca": "Catalano (Catalano)",
+ "co": "Corso (Francia)",
+ "cs": "Ceco (Repubblica Ceca)",
+ "da": "Danese (Danimarca)",
+ "dv": "Divehi (Maldive)",
+ "et": "Estone (Estonia)",
+ "fo": "Faroese (Fær Øer)",
+ "fil": "Filippino (Filippine)",
+ "fi": "Finlandese (Finlandia)",
+ "gl": "Galiziano (Galizia)",
+ "ka": "Georgiano (Georgia)",
+ "el": "Greco (Grecia)",
+ "gu": "Gujarati (India)",
+ "ha": "Hausa (alfabeto latino, Nigeria)",
+ "he": "Ebraico (Israele)",
+ "hi": "Hindi (India)",
+ "hu": "Ungherese (Ungheria)",
+ "is": "Islandese (Islanda)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonesiano (Indonesia)",
+ "ga": "Irlandese (Irlanda)",
+ "xh": "Xhosa (Sudafrica)",
+ "zu": "Zulu (Sudafrica)",
+ "ja": "Giapponese (Giappone)",
+ "kn": "Kannada (India)",
+ "kk": "Kazako (Kazakhstan)",
+ "km": "Khmer (Cambogia)",
+ "rw": "Kinyarwanda (Ruanda)",
+ "sw": "Swahili (Kenya)",
+ "kok": "Konkani (India)",
+ "ko": "Coreano (Corea)",
+ "ky": "Kirghiso (Kirghizistan)",
+ "lo": "Lao (Repubblica democratica popolare del Laos)",
+ "lv": "Lettone (Lettonia)",
+ "lt": "Lituano (Lituania)",
+ "lb": "Lussemburghese (Lussemburgo)",
+ "mk": "Macedone (Macedonia del Nord)",
+ "ml": "Malayalam (India)",
+ "mt": "Maltese (Malta)",
+ "mi": "Maori (Nuova Zelanda)",
+ "mr": "Marathi (India)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepalese (Nepal)",
+ "oc": "Occitano (Francia)",
+ "or": "Odia (India)",
+ "ps": "Pashto (Afghanistan)",
+ "fa": "Persiano",
+ "pl": "Polacco (Polonia)",
+ "pa": "Punjabi (India)",
+ "ro": "Romeno (Romania)",
+ "rm": "Romancio (Svizzera)",
+ "ru": "Russo (Russia)",
+ "sa": "Sanscrito (India)",
+ "st": "Sotho del nord (Sudafrica)",
+ "tn": "Tswana (Sudafrica)",
+ "si": "Singalese (Sri Lanka)",
+ "sk": "Slovacco (Slovacchia)",
+ "sl": "Sloveno (Slovenia)",
+ "sv": "Svedese (Svezia)",
+ "syr": "Siriaco (Siria)",
+ "tg": "Tagico (alfabeto cirillico, Tagikistan)",
+ "ta": "Tamil (India)",
+ "tt": "Tartaro (Russia)",
+ "te": "Telugu (India)",
+ "th": "Thai (Thailandia)",
+ "bo": "Tibetano (Repubblica popolare cinese)",
+ "tr": "Turco (Turchia)",
+ "tk": "Turcomanno (Turkmenistan)",
+ "uk": "Ucraino (Ucraina)",
+ "ur": "Urdu (Pakistan)",
+ "vi": "Vietnamita (Vietnam)",
+ "cy": "Gallese (Regno Unito)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (Repubblica popolare cinese)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Ruolo predefinito",
+ "customCloudPCRole": "Ruolo di Windows 365 personalizzato",
+ "customIntuneRole": "Ruolo di Intune personalizzato",
+ "customRole": "Ruolo personalizzato"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "Versione dell'app",
+ "dependencyName": "Nome della dipendenza",
+ "lastModifiedTime": "Ora ultima modifica",
+ "relationship": "Relazione",
+ "replaced": "Sostituito",
+ "searchPlaceholder": "Filtra per nome dell'app",
+ "status": "Dettagli stato",
+ "statusDetails": "Stato",
+ "supersedenceName": "Nome sostituzione"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Dipendenza figlio",
+ "indirectSupersedence": "Non direttamente correlato",
+ "supersedenceAncestors": "Sostituzione in corso",
+ "supersedenceDescendants": "Sostituito"
+ },
+ "SupersededReplaced": {
+ "no": "No",
+ "yes": "Sì"
+ },
+ "Tabs": {
+ "chart": "Grafico",
+ "dependency": "Dipendenza",
+ "label": "Visualizza: ",
+ "supersedence": "Sostituzione",
+ "table": "Tabella"
+ },
+ "dependencyGraphAriaLabel": "Grafico sulle dipendenze dell'app",
+ "supersedenceGraphAriaLabel": "Grafico sostituzione app"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Numero di giorni di attesa prima del riavvio forzato"
+ },
+ "Description": {
+ "label": "Descrizione"
+ },
+ "Name": {
+ "label": "Nome"
+ },
+ "QualityUpdateRelease": {
+ "label": "Accelera l'installazione degli aggiornamenti qualitativi se la versione del sistema operativo è precedente a:"
+ },
+ "bladeTitle": "Aggiornamenti qualitativi Windows 10 e versioni successive (anteprima)",
+ "loadError": "Il caricamento non è riuscito."
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Impostazioni"
+ },
+ "infoBoxText": "L'unico controllo dedicato per gli aggiornamenti qualitativi, oltre al criterio Fasi di aggiornamento esistente per Windows 10 e versioni successive, consiste nella possibilità di accelerare gli aggiornamenti qualitativi per dispositivi che non rispettano un livello specificato di patch. Controlli aggiuntivi saranno disponibili in futuro.",
+ "licenseLearnMoreText": "Altre informazioni sui prerequisiti e sui criteri di aggiornamento qualitativo.",
+ "licenseWarningBoxText": "La creazione di criteri di aggiornamento qualitativo richiede licenze specifiche.",
+ "warningBoxText": "Benché l'accelerazione degli aggiornamenti software possa contribuire alla riduzione del tempo richiesto per ottenere la conformità, quando necessario, ha un impatto più ampio sulla produttività degli utenti finali. La probabilità che venga eseguito un riavvio forzato durante l'orario di ufficio viene incrementata significativamente."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "Nei dispositivi Android è possibile consentire l'uso dell'identificazione tramite impronta digitale anziché tramite PIN. Agli utenti viene richiesto di fornire l'impronta digitale per accedere all'app con l'account aziendale.",
+ "iOS": "Nei dispositivi iOS/iPadOS è possibile consentire l'uso dell'identificazione tramite impronta digitale anziché tramite PIN. Agli utenti viene richiesto di fornire l'impronta digitale per accedere all'app con l'account aziendale.",
+ "mac": "Nei dispositivi Mac è possibile consentire l'uso dell'identificazione tramite impronta digitale anziché tramite PIN. Agli utenti viene richiesto di fornire l'impronta digitale per accedere all'app con l'account aziendale."
+ },
+ "allowWidgetContentSync": "Scegliere Blocca per impedire alle app gestite da criteri di salvare i dati nei widget delle app. Se si sceglie Consenti, l'app gestita da criteri può salvare i dati nei widget dell'app, se tali funzionalità sono supportate e abilitate all'interno dell'app gestita da criteri. \r\n\r\n \r\n\r\nLe app possono fornire funzionalità di configurazione aggiuntive con i criteri di configurazione delle app. Per ulteriori informazioni, vedere la documentazione dell'app.",
+ "appSharingFromLevel1": "Selezionare una delle opzioni seguenti per specificare le app da cui questa app può ricevere dati:",
+ "appSharingFromLevel2": "{0}: consente la ricezione di dati nei documenti o negli account dell'organizzazione solo da altre app gestite da criteri",
+ "appSharingFromLevel3": "{0}: consente la ricezione di dati nei documenti o negli account dell'organizzazione da qualsiasi app",
+ "appSharingFromLevel4": "{0}: non consente la ricezione di dati nei documenti o negli account dell'organizzazione da qualsiasi app",
+ "appSharingFromLevel5": "{0}: è possibile consentire il trasferimento dei dati da qualsiasi app e gestire tutti i dati in ingresso privi di identità utente come dati dell'organizzazione.",
+ "appSharingToLevel1": "Selezionare una delle opzioni seguenti per specificare le app a cui questa app può inviare dati:",
+ "appSharingToLevel2": "{0}: consente l'invio di dati dell'organizzazione solo verso altre app gestite da criteri",
+ "appSharingToLevel3": "{0}: consente l'invio di dati dell'organizzazione a qualsiasi app",
+ "appSharingToLevel4": "{0}: non consente l'invio di dati dell'organizzazione a qualsiasi app",
+ "appSharingToLevel5": "{0}: è possibile consentire il trasferimento solo ad altre app gestite da criteri e il trasferimento di file ad altre app gestite da MDM nei dispositivi registrati",
+ "appSharingToLevel6": "{0}: è possibile consentire il trasferimento solo ad altre app gestite da criteri e l'applicazione di filtri alle finestre di dialogo Apri in/Condividi per il sistema operativo in modo che vengano visualizzate solo le app gestite da criteri",
+ "assignmentFilterEdit1": "Se si applicano filtri di assegnazione a questo criterio, la proprietà 'Tipo di gestione dispositivi' verrà applicata oltre ai valori specificati per 'Imposta come destinazione le app in tutti i tipi di dispositivo' e 'Tipi di dispositivo' nella pagina 'App'.",
+ "assignmentFilterEdit2": "Altre informazioni sull'assegnazione dei criteri di protezione dell'app.",
+ "conditionalEncryption1": "Selezionare {0} per disabilitare la crittografia delle app per le risorse di archiviazione delle app interne quando la crittografia dei dispositivi viene rilevata in un dispositivo registrato.",
+ "conditionalEncryption2": "Nota: Intune può rilevare la registrazione dei dispositivi solo con Intune MDM. Le risorse di archiviazione delle app esterne saranno ancora crittografate per assicurare che i dati non siano accessibili da applicazioni non gestite.",
+ "contactSyncMac": "Se questa opzione è disabilitata, le app non possono salvare contatti nella rubrica nativa.",
+ "contactsSync": "Scegliere Blocca per impedire alle app gestite da criteri di salvare i dati nelle app native del dispositivo, ad esempio Contatti, Calendario e widget, o per impedire l'uso di componenti aggiuntivi all'interno delle app gestite da criteri. Se si sceglie Consenti, l'app gestita da criteri può salvare i dati nelle app native o usare i componenti aggiuntivi, se queste funzionalità sono supportate e abilitate nell'app gestita da criteri.
Le app possono fornire funzionalità di configurazione aggiuntive con i criteri di configurazione dell'app. Per ulteriori informazioni, vedere la documentazione dell'app.",
+ "deviceTypeTargetingCreate1": "La destinazione del tipo di dispositivo è stata spostata nel passaggio Assegnazioni nella creazione dei criteri.",
+ "deviceTypeTargetingEdit1": "Se si applicano filtri di assegnazione a questo criterio, la proprietà 'Tipo di gestione dispositivi' verrà applicata oltre ai valori specificati per 'Imposta come destinazione le app in tutti i tipi di dispositivo' e 'Tipi di dispositivo' nella pagina 'App'.",
+ "deviceTypeTargetingEdit2": "Per modificare la destinazione del tipo di gestione dei dispositivi, reimpostare 'Imposta come destinazione le app in tutti i tipi di dispositivo' = 'Sì'. Creare quindi un filtro di assegnazione MAM con i valori desiderati per 'Tipo di gestione dispositivo'.",
+ "deviceTypeTargetingHasMoved": "Altre informazioni sull'assegnazione dei criteri di protezione dell'app",
+ "encryptionAndroid1": "Per le app associate a criteri di gestione dei dispositivi mobili di Intune, la crittografia è fornita da Microsoft. I dati sono crittografati in modo sincrono durante le operazioni di I/O dei file in base all'impostazione specificata nei criteri di gestione delle applicazioni per dispositivi mobili. Le app gestite in Android usano la crittografia AES-128 in modalità CBC usando le librerie di crittografia della piattaforma. Il metodo di crittografia non è conforme con FIPS 140-2. La crittografia SHA-256 è supportata come un'istruzione esplicita usando il parametro SigAlg e funziona solo sui dispositivi con versione 4.2 e successive. Il contenuto nell'archiviazione del dispositivo è sempre crittografato.",
+ "encryptionAndroid2": "Quando si richiede la crittografia tramite i criteri dell'app, l'utente finale deve configurare e usare un PIN per accedere al dispositivo. Se non è stato impostato un PIN per l'accesso al dispositivo, le app non verranno avviate e l'utente finale visualizzerà un messaggio che indica che l'azienda ha richiesto di impostare un PIN del dispositivo per accedere all'applicazione.",
+ "encryptionMac1": "Per le app associate a criteri di gestione dei dispositivi mobili di Intune, la crittografia è fornita da Microsoft. I dati sono crittografati in modo sincrono durante le operazioni di I/O dei file in base all'impostazione specificata nei criteri di gestione delle applicazioni per dispositivi mobili. Le app gestite in Mac usano la crittografia AES-128 in modalità CBC usando le librerie di crittografia della piattaforma. Il metodo di crittografia non è conforme con FIPS 140-2. La crittografia SHA-256 è supportata come un'istruzione esplicita usando il parametro SigAlg e funziona solo sui dispositivi con versione 4.2 e successive. Il contenuto nell'archiviazione del dispositivo è sempre crittografato.",
+ "faceId1": "Se applicabile, è possibile consentire l'uso di Identificazione viso invece del PIN. Agli utenti viene richiesto di fornire l'identificazione viso quando accedono all'app con i propri account aziendali.",
+ "faceId2": "Selezionare Sì per consentire l'Identificazione viso invece di un PIN per l'accesso all'app.",
+ "managementLevelsAndroid1": "Usare questa opzione per specificare se il criterio è applicabile ai dispositivi dell'amministratore di dispositivi Android, ai dispositivi Android Enterprise o ai dispositivi non gestiti.",
+ "managementLevelsAndroid2": "{0}: i dispositivi non gestiti sono dispositivi in cui la gestione di Intune MDM non è stata rilevata. Sono inclusi fornitori MDM di terze parti.",
+ "managementLevelsAndroid3": "{0}: dispositivi gestiti da Intune che usano l'API Android Device Administration.",
+ "managementLevelsAndroid4": "{0}: dispositivi gestiti da Intune che usano i profili di lavoro di Android Enterprise o la gestione dispositivi completa di Android Enterprise.",
+ "managementLevelsIos1": "Usare questa opzione per specificare se questo criterio è applicabile ai dispositivi MDM gestiti o ai dispositivi non gestiti.",
+ "managementLevelsIos2": "{0}: i dispositivi non gestiti sono dispositivi in cui la gestione di Intune MDM non è stata rilevata. Sono inclusi fornitori MDM di terze parti.",
+ "managementLevelsIos3": "{0}: i dispositivi gestiti sono gestiti da Intune MDM.",
+ "minAppVersion": "Definire il numero di versione minimo obbligatorio dell'app che un utente deve avere per ottenere l'accesso sicuro all'app.",
+ "minAppVersionWarning": "Definire il numero di versione minimo consigliato dell'app che un utente deve avere per un accesso sicuro all'app.",
+ "minOsVersion": "Definire il numero di versione minimo obbligatorio del sistema operativo che un utente deve avere per ottenere l'accesso sicuro all'app.",
+ "minOsVersionWarning": "Definire il numero di versione minimo consigliato del sistema operativo che un utente deve avere per ottenere l'accesso sicuro all'app.",
+ "minPatchVersion": "Definire il livello di patch di protezione meno recente obbligatorio per Android consentito a un utente per ottenere l'accesso sicuro all'app.",
+ "minPatchVersionWarning": "Definire il livello di patch di protezione meno recente consigliato per Android consentito a un utente per l'accesso sicuro all'app.",
+ "minSdkVersion": "Definire la versione minima obbligatoria di Intune Application Protection Policy SDK che un utente deve avere per ottenere l'accesso sicuro all'app.",
+ "requireAppPinDefault": "
Selezionare Sì per disabilitare il PIN dell'app quando un blocco del dispositivo viene rilevato in un dispositivo registrato.
",
+ "targetAllApps1": "Usare questa opzione per specificare come destinazione del criterio le app nei dispositivi con qualsiasi stato di gestione.",
+ "targetAllApps2": "Durante la risoluzione del conflitto tra i criteri questa impostazione verrà sostituita se un utente ha un criterio destinato a uno stato di gestione specifico.",
+ "touchId2": "Selezionare {0} per richiedere l'identificazione tramite impronta digitale anziché un PIN per l'accesso all'app."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Specificare il numero di giorni che devono trascorrere prima che sia necessaria la reimpostazione del PIN da parte dell'utente.",
+ "previousPinBlockCount": "Questa impostazione consente di specificare il numero di PIN precedenti che verranno conservati da Intune. Eventuali nuovi PIN devono essere diversi da quelli conservati da Intune."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Consentirà a Windows Search di continuare a eseguire ricerche nei dati crittografati.",
+ "authoritativeIpRanges": "Abilitare questa impostazione se si vuole eseguire l'override del rilevamento automatico Windows degli intervalli di indirizzi IP.",
+ "authoritativeProxyServers": "Abilitare questa impostazione se si vuole eseguire l'override del rilevamento automatico Windows dei server proxy.",
+ "checkInput": "Verifica la validità dell'input",
+ "dataRecoveryCert": "Un certificato di ripristino è un certificato EFS (Encrypting File System) speciale che consente di recuperare i file crittografati in caso di perdita o danneggiamento della chiave di crittografia. È necessario creare il certificato di ripristino e specificarlo qui. Per altre informazioni, vedere qui",
+ "enterpriseCloudResources": "
Specificare le risorse cloud da considerare aziendali e da proteggere con il criterio di Windows Information Protection. È possibile specificare più risorse separando le singole voci con il carattere '|'.
Se nell'azienda è stato configurato un proxy, è possibile specificare il proxy tramite cui verrà instradato il traffico alle risorse cloud specificate.
URL[,Proxy]|URL[,Proxy]
Senza proxy: contoso.sharepoint.com|contoso.visualstudio.com Con proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Specificare gli intervalli IPv4 che costituiscono la rete aziendale. Questi intervalli vengono usati insieme ai nomi di dominio di rete aziendale specificati per definire il limite di rete aziendale.
Questa impostazione è necessaria per abilitare Windows Information Protection.
È possibile specificare più intervalli separando le singole voci con una virgola.
Ad esempio: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
+ "enterpriseIPv6Ranges": "
Specificare gli intervalli IPv6 che costituiscono la rete aziendale. Questi intervalli vengono usati insieme ai nomi di dominio di rete aziendale specificati per definire il limite di rete aziendale.
È possibile specificare più intervalli separando le singole voci con una virgola.
Ad esempio: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
+ "enterpriseInternalProxyServers": "
Se nell'azienda è stato configurato un proxy, è possibile specificare il proxy tramite cui instradare il traffico alle risorse cloud specificate nelle impostazioni Risorse cloud aziendali.
È possibile specificare più valori separando le singole voci con un punto e virgola.
Ad esempio: contoso.internalproxy1.com;contoso.internalproxy2.com
",
+ "enterpriseNetworkDomainNames": "
Specificare i nomi DNS che costituiscono la rete aziendale. Questi nomi vengono usati insieme agli intervalli IP specificati per definire il limite di rete aziendale. È possibile specificare più valori separando le singole voci con una virgola.
Questa impostazione è necessaria per abilitare Windows Information Protection.
Ad esempio: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Specificare i nomi DNS che costituiscono la rete aziendale. Questi nomi vengono usati insieme agli intervalli IP specificati per definire il limite di rete aziendale. È possibile specificare più valori separando le singole voci con una barra verticale '|'.
Questa impostazione è necessaria per abilitare Windows Information Protection.
Ad esempio: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
Se nella rete aziendale sono presenti proxy con accesso all'esterno, specificarli qui. Quando si specifica un indirizzo del server proxy, è necessario specificare anche la porta tramite cui il traffico deve essere consentito e protetto con Windows Information Protection.
Nota: questo elenco non deve includere i server presenti nell'elenco Server proxy interni aziendali. È possibile specificare più valori separando le singole voci con un punto e virgola.
Ad esempio: proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "Specifica l'intervallo di tempo massimo (in minuti) consentito in caso di inattività del dispositivo dopo il quale il dispositivo verrà bloccato tramite PIN o password. Gli utenti possono selezionare qualsiasi valore di timeout inferiore all'intervallo di tempo massimo specificato nell'app Impostazioni. Si noti che per Lumia 950 e 950XL è previsto un valore di timeout massimo di 5 minuti, indipendentemente dal valore configurato da questo criterio.",
+ "maxInactivityTime2": "0 (valore predefinito): non viene definito alcun timeout. Il valore predefinito '0' viene interpretato come 'Nessun timeout definito'.",
+ "maxPasswordAttempts1": "Questo criterio presenta comportamenti diversi nei dispositivi mobili e nei computer desktop.",
+ "maxPasswordAttempts2": "Quando l'utente raggiunge il valore impostato da questo criterio in un dispositivo mobile, vengono cancellati i dati del dispositivo.",
+ "maxPasswordAttempts3": "Quando l'utente raggiunge il valore impostato da questo criterio in un computer desktop, non vengono cancellati i dati. Viene attivata nel computer desktop la modalità di ripristino BitLocker, che rende i dati inaccessibili ma recuperabili. Se BitLocker non è abilitato, non è possibile applicare il criterio.",
+ "maxPasswordAttempts4": "Prima di raggiungere il limite di tentativi non riusciti, l'utente viene inviato alla schermata di blocco e viene visualizzato un avviso che indica che altri tentativi non riusciti comporteranno il blocco del computer. Quando l'utente raggiunge il limite, il dispositivo si riavvia automaticamente e mostra la pagina di ripristino BitLocker, che richiede all'utente la chiave di ripristino di BitLocker.",
+ "maxPasswordAttempts5": "0 (valore predefinito): i dati del dispositivo non vengono mai cancellati dopo l'immissione di un PIN errato o di una password non valida.",
+ "maxPasswordAttempts6": "Il valore più sicuro è 0 se tutti i valori del criterio sono uguali a 0. In caso contrario, il valore del criterio minimo è il valore più sicuro.",
+ "mdmDiscoveryUrl": "Specificare l'URL per l'endpoint di registrazione MDM che verrà usato dagli utenti che si registrano in MDM. Per impostazione predefinita, viene specificato questo valore per Intune.",
+ "minimumPinLength1": "Valore intero che imposta il numero minimo di caratteri necessari per il PIN. Il valore predefinito è 4. Il numero minimo configurabile per questa impostazione del criterio è 4. Il numero massimo configurabile deve essere inferiore al numero configurato nell'impostazione del criterio Lunghezza massima del PIN o 127, a seconda di quale sia il valore più basso.",
+ "minimumPinLength2": "Se si configura questa impostazione del criterio, la lunghezza del PIN deve essere superiore o uguale a questo numero. Se si disabilita o non si configura questa impostazione del criterio, la lunghezza deve essere superiore o uguale a 4.",
+ "name": "Nome di questo limite di rete",
+ "neutralResources": "
Se nell'azienda sono disponibili endpoint di reindirizzamento dell'autenticazione, specificarli qui. Le posizioni specificate qui vengono considerate personali o aziendali in base al contesto della connessione prima del reindirizzamento.
È possibile specificare più valori separando le singole voci con una virgola.
Ad esempio: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Valore che imposta Windows Hello for Business come metodo per l'accesso a Windows.",
+ "passportForWork2": "Il valore predefinito è true. Se si imposta questo criterio su false, l'utente può effettuare il provisioning di Windows Hello for Business solo nei dispositivi mobili aggiunti a Microsoft Entra in cui è obbligatorio il provisioning.",
+ "pinExpiration": "Il numero massimo configurabile per questa impostazione del criterio è 730. Il numero minimo configurabile per questa impostazione del criterio è 0. Se si imposta il criterio su 0, il PIN dell'utente non scadrà mai.",
+ "pinHistory1": "Il numero massimo configurabile per questa impostazione del criterio è 50. Il numero minimo configurabile per questa impostazione del criterio è 0. Se si imposta il criterio su 0, l'archiviazione dei PIN precedenti non è necessaria.",
+ "pinHistory2": "Il PIN attuale dell'utente viene incluso nel set di PIN associati all'account utente. La cronologia del PIN non viene conservata tramite una reimpostazione del PIN.",
+ "protectUnderLock": "Protegge il contenuto dell'app quando il dispositivo è bloccato.",
+ "protectionModeBlock": "
Blocca: impedisce l'uscita dei dati aziendali dalle app protette.
",
+ "protectionModeOff": "
No: l'utente può spostare i dati all'esterno delle app protette. Non viene registrata alcuna azione.
",
+ "protectionModeOverride": "
Consenti sostituzioni: viene visualizzato un avviso quando l'utente prova a spostare i dati da un'app protetta a un'app non protetta. Se l'utente sceglie di ignorare l'avviso, l'azione verrà registrata.
",
+ "protectionModeSilent": "
Invisibile all'utente: l'utente può spostare i dati all'esterno delle app protette. Queste azioni vengono registrate.
",
+ "required": "Necessario",
+ "revokeOnMdmHandoff": "Aggiunto in Windows 10 versione 1703. Questo criterio consente di controllare se revocare le chiavi WIP quando un dispositivo esegue l\\'aggiornamento da MAM a MDM. Se è impostato su \\\"Off\\\", le chiavi non verranno revocate e l\\'utente continuerà ad accedere ai file protetti dopo l\\'aggiornamento. Questa è l\\'opzione consigliata se il servizio MDM è configurato con lo stesso valore EnterpriseID WIP del servizio MAM.",
+ "revokeOnUnenroll": "Le chiavi di crittografia verranno revocate quando viene annullata la registrazione di un dispositivo da questo criterio.",
+ "rmsTemplateForEdp": "GUID di TemplateID da usare per la crittografia RMS. Il modello di Azure RMS consente all'amministratore IT di configurare i dettagli relativi agli utenti autorizzati ad accedere ai file con protezione RMS e alla durata dell'accesso.",
+ "showWipIcon": "Questa opzione consente di informare l'utente quando si trova in un contesto aziendale, tramite la sovrimpressione di un'icona.",
+ "useRmsForWip": "Specifica se consentire la crittografia di Azure RMS per WIP."
+ },
+ "requireAppPin": "
Selezionare Sì per disabilitare il PIN dell'app quando viene rilevato un blocco del dispositivo in un dispositivo registrato.
Nota: Intune non può rilevare la registrazione dei dispositivi con una soluzione EMM di terze parti in iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Crea uno script personalizzato",
+ "edit": "Modifica lo script personalizzato"
+ },
+ "basicInfo": "È possibile creare un nuovo pacchetto di script personalizzato dagli script di rilevamento e correzione scritti dall'utente.",
+ "customScriptCapitalized": "Script personalizzato",
+ "customScriptLowercase": "script personalizzato",
+ "detectionScript": "Script di rilevamento"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Predefinito",
+ "header": "Priorità di aggiornamento",
+ "postponed": "Posticipata",
+ "priority": "Priorità alta"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Aggiornamento automatico",
+ "sublabel": "Se l'utente ha installato una o più app aggiunte in sostituzione dal Portale aziendale, richiedere l'installazione dell'app di sostituzione."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Sfondo",
+ "displayText": "Download del contenuto in {0}",
+ "foreground": "Primo piano",
+ "header": "Priorità di ottimizzazione recapito"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Consenti all'utente di posporre la notifica di riavvio",
+ "countdownDialog": "Selezionare quando visualizzare la finestra di dialogo per il conto alla rovescia prima del riavvio (minuti)",
+ "durationInMinutes": "Periodo di tolleranza per il riavvio del dispositivo (minuti)",
+ "snoozeDurationInMinutes": "Selezionare la durata della posposizione (minuti)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Fuso orario",
+ "local": "Fuso orario del dispositivo",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Data e ora",
+ "deadlineTimeColumnLabel": "Scadenza installazione",
+ "deadlineTimeDatePickerErrorMessage": "La data selezionata deve essere successiva alla data di disponibilità",
+ "deadlineTimeLabel": "Scadenza dell'installazione app",
+ "defaultTime": "Appena possibile",
+ "infoText": "Questa applicazione sarà disponibile immediatamente dopo la distribuzione, a meno che non si specifichi una data di disponibilità più avanti. Se si tratta di un'applicazione obbligatoria, è possibile specificare la scadenza per l'installazione.",
+ "specificTime": "Data o ora specifiche",
+ "startTimeColumnLabel": "Disponibilità",
+ "startTimeDatePickerErrorMessage": "La data selezionata deve essere precedente alla data di scadenza",
+ "startTimeLabel": "Disponibilità dell'app"
+ },
+ "restartGracePeriodHeader": "Periodo di tolleranza per il riavvio",
+ "restartGracePeriodLabel": "Periodo di tolleranza per il riavvio del dispositivo",
+ "summaryTitle": "Esperienza dell'utente finale"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Assegnare l'attributo personalizzato ad almeno un gruppo. Passare a Proprietà per modificare le assegnazioni.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Script della shell",
"successfullySavedPolicy": "Il salvataggio di {0} è stato completato"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64 bit",
+ "thirtyTwoBit": "32 bit"
+ },
+ "Countries": {
+ "ae": "Emirati Arabi Uniti",
+ "ag": "Antigua e Barbuda",
+ "ai": "Anguilla",
+ "al": "Albania",
+ "am": "Armenia",
+ "ao": "Angola",
+ "ar": "Argentina",
+ "at": "Austria",
+ "au": "Australia",
+ "az": "Azerbaigian",
+ "bb": "Barbados",
+ "be": "Belgio",
+ "bf": "Burkina Faso",
+ "bg": "Bulgaria",
+ "bh": "Bahrein",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolivia",
+ "br": "Brasile",
+ "bs": "Bahamas",
+ "bt": "Bhutan",
+ "bw": "Botswana",
+ "by": "Bielorussia",
+ "bz": "Belize",
+ "ca": "Canada",
+ "cg": "Repubblica del Congo",
+ "ch": "Svizzera",
+ "cl": "Cile",
+ "cn": "Cina",
+ "co": "Colombia",
+ "cr": "Costa Rica",
+ "cv": "Cabo Verde",
+ "cy": "Cipro",
+ "cz": "Repubblica Ceca",
+ "de": "Germania",
+ "dk": "Danimarca",
+ "dm": "Dominica",
+ "do": "Repubblica dominicana",
+ "dz": "Algeria",
+ "ec": "Ecuador",
+ "ee": "Estonia",
+ "eg": "Egitto",
+ "es": "Spagna",
+ "fi": "Finlandia",
+ "fj": "Figi",
+ "fm": "Stati federati di Micronesia",
+ "fr": "Francia",
+ "gb": "Regno Unito",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Grecia",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hong Kong",
+ "hn": "Honduras",
+ "hr": "Croazia",
+ "hu": "Ungheria",
+ "id": "Indonesia",
+ "ie": "Irlanda",
+ "il": "Israele",
+ "in": "India",
+ "is": "Islanda",
+ "it": "Italia",
+ "jm": "Giamaica",
+ "jo": "Giordania",
+ "jp": "Giappone",
+ "ke": "Kenya",
+ "kg": "Kirghizistan",
+ "kh": "Cambogia",
+ "kn": "Saint Kitts e Nevis",
+ "kr": "Repubblica di Corea del Sud",
+ "kw": "Kuwait",
+ "ky": "Isole Cayman",
+ "kz": "Kazakhstan",
+ "la": "Repubblica democratica popolare del Laos",
+ "lb": "Libano",
+ "lc": "Saint Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Lituania",
+ "lu": "Lussemburgo",
+ "lv": "Lettonia",
+ "md": "Repubblica di Moldova",
+ "mg": "Madagascar",
+ "mk": "Macedonia del Nord",
+ "ml": "Mali",
+ "mn": "Mongolia",
+ "mo": "Macao",
+ "mr": "Mauritania",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Messico",
+ "my": "Malaysia",
+ "mz": "Mozambico",
+ "na": "Namibia",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Paesi Bassi",
+ "no": "Norvegia",
+ "np": "Nepal",
+ "nz": "Nuova Zelanda",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Perù",
+ "pg": "Papua Nuova Guinea",
+ "ph": "Filippine",
+ "pk": "Pakistan",
+ "pl": "Polonia",
+ "pt": "Portogallo",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Romania",
+ "ru": "Russia",
+ "sa": "Arabia Saudita",
+ "sb": "Isole Salomone",
+ "sc": "Seychelles",
+ "se": "Svezia",
+ "sg": "Singapore",
+ "si": "Slovenia",
+ "sk": "Slovacchia",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Suriname",
+ "st": "São Tomé e Príncipe",
+ "sv": "El Salvador",
+ "sz": "Swaziland",
+ "tc": "Turks e Caicos",
+ "td": "Ciad",
+ "th": "Thailandia",
+ "tj": "Tagikistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunisia",
+ "tr": "Turchia",
+ "tt": "Trinidad e Tobago",
+ "tw": "Taiwan",
+ "tz": "Tanzania",
+ "ua": "Ucraina",
+ "ug": "Uganda",
+ "us": "Stati Uniti",
+ "uy": "Uruguay",
+ "uz": "Uzbekistan",
+ "vc": "Saint Vincent e Grenadine",
+ "ve": "Venezuela",
+ "vg": "Isole Vergini Britanniche",
+ "vn": "Vietnam",
+ "ye": "Yemen",
+ "za": "Sudafrica",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Questa impostazione non è configurabile tramite OMA-URI perché è disponibile nel catalogo delle impostazioni. Passare al catalogo delle impostazioni per configurare questa impostazione."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Selezionare un file del profilo di configurazione"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Queste impostazioni vengono applicate ai dispositivi registrati con o senza l'approvazione utente tramite la registrazione dispositivi e per i dispositivi registrati con la registrazione automatica dei dispositivi (definita in precedenza DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Registrazione dei dispositivi e registrazione automatica dei dispositivi",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Registrazione dei dispositivi e registrazione automatica dei dispositivi",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Configurare Microsoft Launcher nei dispositivi completamente gestiti.",
+ "deviceExperienceTypeDescription": "In base all'esperienza che vuoi configurare, seleziona Modalità tutto schermo o Microsoft Launcher per iniziare a configurare l'esperienza nei dispositivi. Se non si seleziona un tipo di esperienza del dispositivo, gli utenti visualizzeranno l'esperienza predefinita della schermata iniziale del dispositivo.",
+ "deviceExperienceTypeKioskMode": "Modalità tutto schermo (dedicata e completamente gestita)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "È possibile usare Microsoft Launcher per personalizzare l'esperienza della schermata iniziale nei dispositivi gestiti dell'organizzazione. Se si imposta Launcher come predefinito, gli utenti del dispositivo non potranno usare un'altra utilità di avvio.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Imposta Microsoft Launcher come utilità di avvio predefinita",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (solo completamente gestito)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Gli utenti non potranno modificare lo sfondo a meno che non lo si consenta. Questa impostazione è disponibile solo se si configura uno sfondo personalizzato.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Consenti all'utente di modificare lo sfondo",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Consente di applicare un'immagine personalizzata come sfondo della schermata iniziale e di scegliere se l'utente può modificarla. Se non si configura uno sfondo personalizzato. il dispositivo manterrà lo sfondo corrente.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Configura uno sfondo personalizzato",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Questa immagine verrà visualizzata come sfondo nella schermata iniziale del dispositivo. Il campo è disponibile solo se si configura uno sfondo personalizzato.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Immettere l'URL dell'immagine di sfondo",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Impostazione disabilitata",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Nascondi",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Mostra",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Se si consente all'utente di modificare la presenza della bacheca, l'impostazione precedente verrà imposta per la distribuzione iniziale. Per le distribuzioni successive l'impostazione non verrà imposta in modo da rispettare eventuali modifiche apportate dall'utente. Questa impostazione è disponibile solo se si configura la presenza della bacheca.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Consenti all'utente di modificare la presenza della bacheca",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "La bacheca è un menu che fornisce agli utenti del dispositivo l'accesso rapido alle app e agli strumenti. Se è nascosto, gli utenti devono scorrere rapidamente per accedervi.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Presenza della bacheca",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Se si consente all'utente di abilitare/disabilitare il feed, l'impostazione precedente verrà imposta per la distribuzione iniziale. Per le distribuzioni successive l'impostazione non verrà imposta in modo da rispettare eventuali modifiche apportate dall'utente. Questa impostazione è disponibile solo se si abilita il feed del launcher.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Consenti all'utente di abilitare/disabilitare il feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Il feed è una schermata aggiuntiva a destra della schermata iniziale che consente agli utenti del dispositivo di accedere a calendari, documenti e attività recenti. Se non lo si abilita, rimarrà disabilitato. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Abilita il feed del launcher",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Posizionamento della barra di ricerca",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "In basso",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Nascondi",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "In alto",
+ "deviceExperienceTypeName": "Tipo di esperienza del dispositivo",
"deviceGuardCredentialGuardDescription": "L'abilitazione con il blocco UEFI impedisce la disabilitazione remota di Credential Guard. L'abilitazione senza blocco UEFI consente la disabilitazione remota di Credential Guard tramite Criteri di gruppo.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "ID dispositivo Intune",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Numero di giorni di attesa prima della transizione dai riavvii automatici pianificati in orari diversi da quelli di attività al riavvio in caso di occupato, che richiede la pianificazione da parte dell'utente.",
"engagedRestartTransitionScheduleName": "Esegui la transizione degli utenti al riavvio in caso di occupato dopo un riavvio automatico (giorni)",
"enhancedOption": "Avanzato (1903 e versioni precedenti)",
- "enrollmentProfileTypeDedicatedDevice": "Dispositivo dedicato",
- "enrollmentProfileTypeDescription": "Selezionare un tipo di profilo di registrazione per iniziare a configurare Microsoft Launcher o Schermata iniziale gestita Microsoft nei dispositivi. Se non si seleziona alcun tipo di profilo, agli utenti verrà visualizzata l'esperienza predefinita della schermata iniziale del dispositivo.",
- "enrollmentProfileTypeFullyManaged": "Completamente gestito",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Configurare Microsoft Launcher nei dispositivi completamente gestiti.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "È possibile usare Microsoft Launcher per personalizzare l'esperienza della schermata iniziale nei dispositivi gestiti dell'organizzazione. Se si imposta Launcher come predefinito, gli utenti del dispositivo non potranno usare un'altra utilità di avvio.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Imposta Microsoft Launcher come utilità di avvio predefinita",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Consenti all'utente di modificare lo sfondo",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Consente di applicare un'immagine personalizzata come sfondo della schermata iniziale e di scegliere se l'utente può modificarla. Se non si configura uno sfondo personalizzato. il dispositivo manterrà lo sfondo corrente.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Configura uno sfondo personalizzato",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Questa immagine verrà visualizzata come sfondo nella schermata iniziale del dispositivo. Il campo è disponibile solo se si configura uno sfondo personalizzato.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Immettere l'URL dell'immagine di sfondo",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Disabilitato",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Nascondi",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Mostra",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "La bacheca è un menu che fornisce agli utenti del dispositivo l'accesso rapido alle app e agli strumenti. Se è nascosto, gli utenti devono scorrere rapidamente per accedervi.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Presenza della bacheca",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Consenti all'utente di abilitare/disabilitare il feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Il feed è una schermata aggiuntiva a destra della schermata iniziale che consente agli utenti del dispositivo di accedere a calendari, documenti e attività recenti. Se non lo si abilita, rimarrà disabilitato. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Abilita il feed del launcher",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Posizionamento della barra di ricerca",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "In basso",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Nascondi",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "In alto",
- "enrollmentProfileTypeName": "Tipo di profilo di registrazione",
"enrollmentSettingsHeading": "Impostazioni di registrazione",
"enterOnlyOneForDns": "Immettere un elenco di server DNS e/o un server proxy.",
"enterpriseModeLoggingExample": "Ad esempio http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Dispositivi con profilo di lavoro completamente gestito, di proprietà aziendale",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Queste impostazioni sono applicabili solo a dispositivi completamente gestiti e dedicati.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Dispositivi completamente gestiti e dedicati",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Queste impostazioni funzionano solo per dispositivi completamente gestiti e dedicati che funzionano con un criterio per chiosco multimediale.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Dispositivi completamente gestiti e dedicati (solo modalità tutto schermo)",
"gameCenterBlockedMacDescription": "Se selezionato, disabilita Game Center e l'icona Game Center viene rimossa dalla schermata iniziale. Disponibile per i dispositivi che eseguono macOS versione 10.13 o versioni successive.",
"gameCenterBlockedMacName": "Blocca il Game Center",
"gamingPageDescription": "Blocca l'accesso ai giochi nell'app Impostazioni.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Consente di configurare il tipo di accesso per accedere alle applicazioni in questo dispositivo in modalità tutto schermo.",
"kioskShowTaskbarDesc": "Consente di mostrare o nascondere la barra delle applicazioni di Windows nella modalità tutto schermo.",
"kioskShowTaskbarName": "Barra delle applicazioni di Windows",
+ "kioskSingleInfoBoxText": "Modalità app singola in modalità tutto schermo: blocca il dispositivo per eseguire l'app selezionata. Per usare questa modalità, è prima necessario approvare e assegnare l'app selezionata dal carico di lavoro delle app client. Nei dispositivi completamente gestiti, l'unica app selezionata che verrà applicata è la schermata iniziale gestita. Tutte le altre app verranno invece considerate come un'app obbligatoria.",
"kioskStartDateTime": "Ora di inizio della finestra di manutenzione",
"kioskStartMenuLayoutXmlDesc": "Specificare un layout XML che definisce l'ordine di visualizzazione delle app nel menu Start",
"kioskStartMenuLayoutXmlDescV2": "L'importazione di un file XML per la configurazione del layout Start consente di eseguire l'override delle opzioni selezionate per l'ordine di visualizzazione e le dimensioni dei riquadri esistenti. Altre informazioni",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Deve essere un percorso file valido",
"mustBeAValidHttpsUrl": "Deve essere un URL HTTPS valido",
"mustBeAValidIPAddress": "Deve essere un indirizzo IP valido (ad esempio 192.168.0.1 o 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Il valore deve essere un indirizzo IP o un NOME FQDN valido con numero di porta facoltativo.",
"mustBeAValidIPv4Address": "Deve essere un indirizzo IPv4 valido (ad esempio 192.168.0.1)",
"mustBeAValidIPv6Address": "Deve essere un indirizzo IPv6 valido (ad esempio 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Deve essere un URL di immagine valido, ad esempio www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Regole di Windows Firewall dall'archivio locale (reti pubbliche)",
"publicNetworkName": "Rete pubblica (non individuabile)",
"publicOutboundConnectionsSummaryLabel": "Azione predefinita per le connessioni in uscita (reti pubbliche)",
- "publicPlayStoreEnabledDescription": "Gli utenti ottengono l'accesso a tutte le app, ad eccezione di quelle per cui è stata richiesta la disinstallazione in App client. Se si sceglie \"Non configurato\" per questa impostazione, gli utenti potranno accedere solo alle app elencate come disponibili oppure obbligatorie in App client.",
+ "publicPlayStoreEnabledDescription": "Se si seleziona \"Consenti\", gli utenti ottengono l'accesso a tutte le app, ad eccezione di quelle per cui è stata richiesta la disinstallazione in App client. Se si sceglie \"Blocca\" o \"Non configurato\" per questa impostazione, gli utenti potranno accedere solo alle app elencate come disponibili oppure obbligatorie in App client.",
"publicPlayStoreEnabledName": "Consenti l'accesso a tutte le app in Google Play Store",
- "publicPlayStoreEnabledWarning": "Se si seleziona \"Consenti\", gli utenti potranno installare nuove app da Google Play Store. Se si modifica successivamente la selezione in \"Non configurato\", tutte le app non consentite esplicitamente per l'utente verranno rimosse dal dispositivo.",
+ "publicPlayStoreEnabledWarning": "Se si seleziona \"Consenti\", gli utenti potranno installare qualsiasi app dal Google Play Store. Se in seguito si modifica la selezione in \"Blocca\" o \"Non configurato\", tutte le app verranno rimosse dal dispositivo, ad eccezione delle app elencate come disponibili o richieste nelle app client.",
+ "publicPlayStoreSelectionAllowList": "Blocco",
+ "publicPlayStoreSelectionBlockList": "Consenti",
+ "publicPlayStoreSelectionNotConfigured": "Non configurato",
"publicShieldedSummaryLabel": "Schermato (reti pubbliche)",
"publicStealthModeSummaryLabel": "Modalità mascheramento (reti pubbliche)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Risposte unicast a broadcast multicast necessarie (reti pubbliche)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Eliminazione...",
"photoLibrary": "Raccolta foto",
"pinCharSettingTooltip": "Un PIN numerico consente solo caratteri numerici.\r\n\r\nUn passcode richiede tutti gli elementi seguenti: caratteri alfanumerici e simboli consentiti.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Importante: il 1° giugno 2024 le app con un SDK precedente alla versione 17.7.0 non otterranno più gli aggiornamenti dei criteri di protezione delle app e gli utenti non potranno più avviare l'app. Assicurarsi che gli utenti aggiornino le app e che le app line-of-business utilizzino un SDK o un wrapper recente. Altre informazioni",
"pinToDashboard": "Stringa fittizia, non tradurre",
"platformColumnLabel": "Piattaforma",
"platformDropDownLabel": "Piattaforma",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Dispositivo",
"licenseTypeUser": "Utente"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Proprietà",
- "rule": "Regola",
- "ruleDetails": "Dettagli regola",
- "value": "Valore"
- },
- "assignIf": "Assegna un profilo se",
- "deleteWarning": "La regola di applicabilità selezionata verrà eliminata",
- "dontAssignIf": "Non assegnare un profilo se",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "e {0} in più",
- "instructions": "Specificare la modalità di applicazione del profilo in un gruppo assegnato. Intune applicherà il profilo solo ai dispositivi che rispettano i criteri combinati di queste regole.",
- "maxText": "Max",
- "minText": "Min",
- "noActionRow": "Non sono state specificate regole di applicabilità",
- "oSVersion": "Ad esempio, 1.2.3.4",
- "toText": "al",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home - Cina",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "Edizione del sistema operativo",
- "windows10OsVersion": "Versione del sistema operativo",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "È uguale a",
- "greaterThan": "Maggiore di",
- "greaterThanOrEqualTo": "Maggiore o uguale a",
- "lessThan": "Minore di",
- "lessThanOrEqualTo": "Minore o uguale a",
- "notEqualTo": "Diverso da"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Imponi il controllo della firma degli script ed esegui lo script automaticamente",
- "enforceSignatureCheckTooltip": "Selezionare 'Sì' per verificare che lo script sia firmato da un'entità di pubblicazione attendibile, in modo da consentire l'esecuzione dello script senza la visualizzazione di avvisi o richieste. Lo script verrà eseguito senza essere bloccato. Selezionare 'No' (impostazione predefinita) per eseguire lo script con la conferma dell'utente finale senza la verifica della firma.",
- "header": "Usa uno script di rilevamento personalizzato",
- "runAs32Bit": "Esegui lo script come processo a 32 bit nei client a 64 bit",
- "runAs32BitTooltip": "Selezionare 'Sì' per eseguire lo script in un processo a 32 bit nei client a 64 bit. Selezionare 'No' (impostazione predefinita) per eseguire lo script in un processo a 64 bit nei client a 64 bit. I client a 32 bit eseguono lo script in un processo a 32 bit.",
- "scriptContent": "Contenuto dello script",
- "scriptFile": "File di script",
- "scriptFileNotSelectedValidation": "Non è stato selezionato alcun file di script.",
- "scriptFileTooltip": "Selezionare uno script di PowerShell che rileverà la presenza dell'app sul client. L'app verrà rilevata quando lo script restituisce un codice di uscita con valore 0 e scrive un valore di stringa in STDOUT.",
- "scriptSizeLimitValidation": "Lo script di rilevamento supera le dimensioni massime consentite. Risolvere questo errore riducendo le dimensioni dello script di rilevamento."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Data creazione",
- "dateModified": "Data di modifica",
- "doesNotExist": "Il file o la cartella non esiste",
- "fileOrFolderExists": "File o cartella esistente",
- "sizeInMB": "Dimensioni in MB",
- "version": "Stringa (versione)"
- },
- "associatedWith32Bit": "Associata a un'app a 32 bit nei client a 64 bit",
- "associatedWith32BitTooltip": "Selezionare 'Sì' per espandere eventuali variabili di ambiente PATH nel contesto a 32 bit nei client a 64 bit. Selezionare 'No' (impostazione predefinita) per espandere eventuali variabili di ambiente nel contesto a 64 bit nei client a 64 bit. I client a 32 bit useranno sempre il contesto a 32 bit.",
- "detectionMethod": "Metodo di rilevamento",
- "detectionMethodTooltip": "Selezionare il tipo di metodo di rilevamento usato per convalidare la presenza dell'app.",
- "fileOrFolder": "File o cartella",
- "fileOrFolderToolTip": "File o cartella da rilevare.",
- "operator": "Operatore",
- "operatorTooltip": "Selezionare l'operatore per il metodo di rilevamento usato per convalidare il confronto.",
- "path": "Percorso",
- "pathTooltip": "Percorso completo della cartella contenente il file o la cartella da rilevare.",
- "value": "Valore",
- "valueTooltip": "Selezionare un valore corrispondente al metodo di rilevamento selezionato. I metodi di rilevamento della data devono essere immessi in ora locale."
- },
- "GridColumns": {
- "pathOrCode": "Percorso/Codice",
- "type": "Tipo"
- },
- "MsiRule": {
- "operator": "Operatore",
- "operatorTooltip": "Selezionare l'operatore per il confronto per la convalida della versione del prodotto MSI.",
- "productCode": "Codice prodotto MSI",
- "productCodeTooltip": "Codice prodotto MSI valido per l'app.",
- "productVersion": "Valore",
- "productVersionCheck": "Verifica della versione del prodotto MSI",
- "productVersionCheckTooltip": "Selezionare 'Sì' per verificare la versione del prodotto MSI oltre al codice prodotto MSI.",
- "productVersionTooltip": "Immettere la versione del prodotto MSI per l'app."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Confronto di numeri interi",
- "keyDoesNotExist": "Chiave inesistente",
- "keyExists": "Chiave esistente",
- "stringComparison": "Confronto di stringhe",
- "valueDoesNotExist": "Valore inesistente",
- "valueExists": "Valore esistente",
- "versionComparison": "Confronto tra le versioni"
- },
- "associatedWith32Bit": "Associata a un'app a 32 bit nei client a 64 bit",
- "associatedWith32BitTooltip": "Selezionare 'Sì' per eseguire ricerche nel Registro di sistema a 32 bit nei client a 64 bit. Selezionare 'No' (impostazione predefinita) per eseguire ricerche nel Registro di sistema a 64 bit nei client a 64 bit. I client a 32 bit eseguiranno sempre ricerche nel registro di sistema a 32 bit.",
- "detectionMethod": "Metodo di rilevamento",
- "detectionMethodTooltip": "Selezionare il tipo di metodo di rilevamento usato per convalidare la presenza dell'app.",
- "keyPath": "Percorso della chiave",
- "keyPathTooltip": "Percorso completo della voce del Registro di sistema contenente il valore da rilevare.",
- "operator": "Operatore",
- "operatorTooltip": "Selezionare l'operatore per il metodo di rilevamento usato per convalidare il confronto.",
- "value": "Valore",
- "valueName": "Nome valore",
- "valueNameTooltip": "Nome del valore del Registro di sistema da rilevare.",
- "valueTooltip": "Selezionare un valore corrispondente al metodo di rilevamento selezionato."
- },
- "RuleTypeOptions": {
- "file": "File",
- "mSI": "MSI",
- "registry": "Registro"
- },
- "gridAriaLabel": "Regole di rilevamento",
- "header": "Creare una regola che indichi la presenza dell'app.",
- "noRulesSelectedPlaceholder": "Non è stata specificata alcuna regola.",
- "ruleTableLimit": "È possibile aggiungere fino a 25 regole di rilevamento",
- "ruleType": "Tipo regola",
- "ruleTypeTooltip": "Scegliere il tipo di regola di rilevamento da aggiungere."
- },
- "RuleConfigurationOptions": {
- "customScript": "Usa uno script di rilevamento personalizzato",
- "manual": "Configura manualmente le regole di rilevamento"
- },
- "bladeTitle": "Regole di rilevamento",
- "header": "Configurare regole specifiche dell'app usate per rilevare la presenza dell'app.",
- "rulesFormat": "Formato delle regole",
- "rulesFormatTooltip": "Scegliere di configurare manualmente le regole di rilevamento o usare uno script personalizzato per rilevare la presenza dell'app.",
- "selectorLabel": "Regole di rilevamento"
+ "BooleanActions": {
+ "allow": "Consentire",
+ "block": "Blocca",
+ "configured": "Configurato",
+ "disable": "Disabilita",
+ "dontRequire": "Non rendere obbligatorio",
+ "enable": "Abilita",
+ "hide": "Nascondi",
+ "limit": "Limite",
+ "notConfigured": "Non configurato",
+ "require": "Rendi obbligatorio",
+ "show": "Mostra",
+ "yes": "Sì"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge impostazioni SmartScreen consigliate per l'app: Windows 10 nel modello di configurazione cloud. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Rilevamento di endpoint e risposta"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "Isolamento di app e browser",
- "aSRApplicationControl": "Controllo applicazione",
- "aSRAttackSurfaceReduction": "Regole per la riduzione della superficie di attacco",
- "aSRDeviceControl": "Controllo del dispositivo",
- "aSRExploitProtection": "Protezione dagli exploit",
- "aSRWebProtection": "Protezione Web (Microsoft Edge Legacy)",
- "aVExclusions": "Esclusioni di Antivirus Microsoft Defender",
- "antivirus": "Antivirus Microsoft Defender",
- "cloudPC": "Baseline di sicurezza di Windows 365",
- "default": "Sicurezza degli endpoint",
- "defenderTest": "Demo di Microsoft Defender per endpoint",
- "diskEncryption": "BitLocker",
- "eDR": "Rilevamento di endpoint e risposta",
- "edgeSecurityBaseline": "Baseline di Microsoft Edge",
- "edgeSecurityBaselinePreview": "Anteprima: baseline di Microsoft Edge",
- "editionUpgradeConfiguration": "Aggiornamento dell'edizione e cambio di modalità",
- "firewall": "Windows Firewall",
- "firewallRules": "Regole di Windows Firewall",
- "identityProtection": "Protezione account",
- "identityProtectionPreview": "Protezione account (anteprima)",
- "mDMSecurityBaseline1810": "Baseline di sicurezza MDM per Windows 10 e versioni successive per ottobre 2018",
- "mDMSecurityBaseline1810Preview": "Anteprima: Baseline di sicurezza MDM per Windows 10 e versioni successive per ottobre 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Anteprima: Baseline di sicurezza MDM per Windows 10 per ottobre 2018 (beta)",
- "mDMSecurityBaseline1906": "Baseline di sicurezza MDM per Windows 10 e versioni successive per maggio 2019",
- "mDMSecurityBaseline2004": "Baseline di sicurezza MDM per Windows 10 e versioni successive per agosto 2020",
- "mDMSecurityBaseline2101": "Baseline di sicurezza MDM per Windows 10 e versioni successive per dicembre 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "Firewall macOS",
- "microsoftDefenderBaseline": "Baseline di Microsoft Defender per endpoint",
- "office365Baseline": "Baseline di Microsoft Office O365",
- "office365BaselinePreview": "Anteprima: baseline di Microsoft Office O365",
- "securityBaselines": "Baseline di sicurezza",
- "test": "Modello di test",
- "testFirewallRulesSecurityTemplateName": "Regole di Windows Firewall (Test)",
- "testIdentityProtectionSecurityTemplateName": "Protezione account (test)",
- "windowsSecurityExperience": "Esperienza di Sicurezza di Windows"
- },
- "Firewall": {
- "mDE": "Windows Firewall"
- },
- "FirewallRules": {
- "mDE": "Regole di Windows Firewall"
- },
- "OneDriveKnownFolderMove": {
- "description": "Impostazioni di spostamento cartelle note di OneDrive: Windows 10 nel modello di configurazione cloud. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Protezione dell'account",
- "administrativeTemplates": "Modelli amministrativi",
- "androidCompliancePolicy": "Criteri di conformità di Android",
- "aospDeviceOwnerCompliancePolicy": "Criteri di conformità di Android (AOSP)",
- "applicationControl": "Controllo app per le aziende",
- "attackSurfaceReductionRules": "Regole per la riduzione della superficie di attacco",
- "bitlocker": "BitLocker",
- "custom": "Personalizzata",
- "deliveryOptimization": "Ottimizzazione recapito",
- "derivedPersonalIdentityVerificationCredential": "Credenziale derivata",
- "deviceControl": "Controllo del dispositivo",
- "deviceFeatures": "Funzionalità del dispositivo",
- "deviceFirmwareConfigurationInterface": "Interfaccia di configurazione del firmware del dispositivo",
- "deviceLock": "Blocco del dispositivo",
- "deviceOwner": "Profilo di lavoro completamente gestito, dedicato e di proprietà aziendale",
- "deviceRestrictions": "Limitazioni del dispositivo",
- "deviceRestrictionsWindows10Team": "Limitazioni del dispositivo (Windows 10 Team)",
- "domainJoinPreview": "Aggiunta a un dominio",
- "editionUpgradeAndModeSwitch": "Aggiornamento dell'edizione e cambio di modalità",
- "education": "Istruzione",
- "email": "Posta elettronica",
- "emailSamsungKnoxOnly": "Posta elettronica (solo Samsung KNOX)",
- "endpointProtection": "Endpoint Protection",
- "expeditedCheckin": "Configurazione della gestione dei dispositivi mobili",
- "exploitProtection": "Protezione di Exploit",
- "extensions": "Estensioni",
- "hardwareConfigurations": "Configurazioni BIOS e altre impostazioni",
- "identityProtection": "Identity Protection",
- "iosCompliancePolicy": "Criteri di conformità di iOS",
- "kiosk": "Tutto schermo",
- "localUsersAndGroups": "Appartenenza a gruppi di utenti locali",
- "macCompliancePolicy": "Criteri di conformità Mac",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Baseline di sicurezza di Microsoft 365 Apps for enterprise",
- "microsoftDefenderAntivirus": "Antivirus Microsoft Defender",
- "microsoftDefenderAntivirusexclusions": "Esclusioni di Antivirus Microsoft Defender",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender per endpoint (dispositivi desktop che eseguono Windows 10 o versioni successive)",
- "microsoftDefenderFirewallRules": "Regole di Windows Firewall",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Baseline di sicurezza per Microsoft Edge",
- "mxProfileZebraOnly": "Profilo MX (solo Zebra)",
- "networkBoundary": "Limite di rete",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Esegui l'override dei criteri di gruppo",
- "pkcsCertificate": "Certificato PKCS",
- "pkcsImportedCertificate": "Certificato PKCS importato",
- "preferenceFile": "File delle preferenze",
- "presets": "Set di impostazioni",
- "scepCertificate": "Certificato SCEP",
- "secureAssessmentEducation": "Valutazione sicura (Education)",
- "securityBaselineForHololens2Advanced": "Baseline di sicurezza avanzata per HoloLens 2",
- "securityBaselineForHololens2Standard": "Baseline di sicurezza standard per HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Baseline di sicurezza per Microsoft Edge",
- "settingsCatalog": "Catalogo di impostazioni",
- "sharedMultiUserDevice": "Dispositivo multiutente condiviso",
- "softwareUpdates": "Aggiornamenti software",
- "trustedCertificate": "Certificato attendibile",
- "unknown": "Sconosciuto",
- "unsupported": "Non supportata",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi per importazione",
- "windows10CompliancePolicy": "Criteri di conformità di Windows 10/11",
- "windows10MobileCompliancePolicy": "Criteri di conformità di Windows 10 Mobile",
- "windows10XScep": "Certificato SCEP - TEST",
- "windows10XTrustedCertificate": "Certificato attendibile - TEST",
- "windows10XVPN": "VPN - TEST",
- "windows10XWifi": "WIFI - TEST",
- "windows11SecurityBaseline": "Baseline di sicurezza per Windows 10 e versioni successive",
- "windows365SecurityBaseline": "Baseline di sicurezza di Windows 365",
- "windows8CompliancePolicy": "Criteri di conformità di Windows 8",
- "windowsHealthMonitoring": "Monitoraggio dello stato di Windows",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Criteri di conformità di Windows Phone",
- "windowsUpdateforBusiness": "Windows Update per le aziende",
- "wiredNetwork": "Rete cablata",
- "workProfile": "Profilo di lavoro di proprietà personale"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Rendi disponibile l'aggiornamento gradualmente",
- "immediateStart": "Rendi disponibile l'aggiornamento il prima possibile",
- "startDateOnly": "Rendi disponibile l'aggiornamento in una data specifica"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Dispositivi gestiti",
- "devicesWithoutEnrollment": "App gestite"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filtro",
- "assignmentFilterTypeColumnHeader": "Modalità filtro",
- "assignmentToast": "Notifiche per l'utente finale",
- "assignmentTypeTableHeader": "TIPO DI ASSEGNAZIONE",
- "autoUpdate": "Aggiornamento automatico",
- "deadlineTimeColumnLabel": "Scadenza installazione",
- "deliveryOptimizationPriorityHeader": "Priorità di ottimizzazione recapito",
- "groupTableHeader": "Gruppo",
- "installContextLabel": "Contesto di installazione",
- "isRemovable": "Installa come rimovibile",
- "licenseTypeLabel": "Tipo di licenza",
- "modeTableHeader": "Modalità gruppo",
- "policySet": "Set di criteri",
- "preventAutoAppUpdate": "Impedisci aggiornamenti automatici delle app",
- "preventManagedAppBackup": "Impedire il backup dell'app iCloud",
- "restartGracePeriodHeader": "Periodo di tolleranza per il riavvio",
- "startTimeColumnLabel": "Disponibilità",
- "tracks": "Tracce",
- "uninstallOnRemoval": "Disinstalla alla rimozione del dispositivo",
- "updateMode": "Priorità di aggiornamento",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "App Web AAD",
- "androidEnterpriseSystemApp": "App del sistema Android Enterprise",
- "androidForWorkApp": "App di Google Play Store gestito",
- "androidLobApp": "App line-of-business Android",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "App Android predefinita",
- "builtInApp": "App predefinita",
- "builtInIos": "App iOS predefinita",
- "iosIPadOSWebClip": "Clip Web iOS/iPadOS",
- "iosLobApp": "App line-of-business iOS",
- "iosStoreApp": "App Store iOS",
- "iosVppApp": "App Volume Purchase Program iOS",
- "lineOfBusinessApp": "App line-of-business",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "App line-of-business macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Famiglia di prodotti Office per macOS",
- "macOSPkgApp": "App macOS (PKG)",
- "macOSWebClip": "Clip Web macOS",
- "macOsVppApp": "App Volume Purchase Program macOS",
- "managedAndroidLobApp": "App line-of-business Android gestita",
- "managedAndroidStoreApp": "App di Android Store gestita",
- "managedGooglePlayApp": "App di Google Play Store gestito",
- "managedGooglePlayPrivateApp": "App privata di Google Play gestito",
- "managedGooglePlayWebApp": "Collegamento Web di Google Play gestito",
- "managedIosLobApp": "App line-of-business iOS gestita",
- "managedIosStoreApp": "App dello Store iOS gestita",
- "microsoftStoreForBusinessApp": "App di Microsoft Store per le aziende",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store per le aziende",
- "officeAddIn": "Componente aggiuntivo per Office",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 e versioni successive)",
- "sharePointApp": "App SharePoint",
- "teamsApp": "App Teams",
- "webApp": "Collegamento Web",
- "win32CatalogApp": "App del catalogo di Windows (Win32)",
- "winGetPublicApp": "Repository della community di Gestione pacchetti Windows",
- "winGetStoreApp": "App Microsoft Store (novità)",
- "windowsAppXLobApp": "App line-of-business AppX per Windows",
- "windowsClassicApp": "App Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 e versioni successive)",
- "windowsMobileMsiLobApp": "App line-of-business di Windows MSI",
- "windowsPhone81AppXBundleLobApp": "App line-of-business AppX per Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "App line-of-business AppX per Windows Phone 8.1",
- "windowsPhone81StoreApp": "App dello Store per Windows Phone 8.1",
- "windowsPhoneXapLobApp": "App line-of-business XAP per Windows Phone",
- "windowsStoreApp": "App Microsoft Store (legacy)",
- "windowsUniversalAppXLobApp": "App line-of-business AppX universale per Windows",
- "windowsUniversalLobApp": "App line-of-business universale di Windows",
- "windowsWebApp": "Link Web Windows"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Escluso",
- "include": "Incluso",
- "includeAllDevicesVirtualGroup": "Incluso",
- "includeAllUsersVirtualGroup": "Incluso"
- },
- "AssignmentToast": {
- "hideAll": "Nascondi tutte le notifiche di tipo avviso popup",
- "showAll": "Mostra tutte le notifiche di tipo avviso popup",
- "showReboot": "Mostra le notifiche di tipo avviso popup per i riavvii dei computer"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Sì",
- "notConfigured": "No"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Download del contenuto in {0}",
- "foreground": "Primo piano",
- "header": "Priorità di ottimizzazione recapito"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "L'installazione dell'app può forzare il riavvio del dispositivo",
- "basedOnReturnCode": "Determinare il comportamento in base ai codici restituiti",
- "force": "Intune forzerà il riavvio obbligatorio del dispositivo",
- "suppress": "Nessuna azione specifica"
- },
- "FilterType": {
- "exclude": "Escludi",
- "include": "Includi",
- "none": "Nessuno"
- },
- "InstallIntent": {
- "available": "Disponibile per i dispositivi registrati",
- "availableWithoutEnrollment": "Disponibile con o senza registrazione",
- "notApplicable": "Non applicabile",
- "required": "Obbligatorio",
- "uninstall": "Disinstalla"
- },
- "SettingType": {
- "assignmentType": "Tipo di assegnazione",
- "deviceLicensing": "Tipo di licenza",
- "installContext": "Disinstalla alla rimozione del dispositivo",
- "toastSettings": "Notifiche per l'utente finale",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Predefinito",
- "postponed": "Posticipata",
- "priority": "Priorità alta"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Configurare i dispositivi per il provisioning iniziale.",
- "title": "Preparazione del dispositivo"
- },
- "EnrollmentSettings": {
- "description": "Configurare le impostazioni di registrazione, ad esempio il blocco della registrazione e l'assegnazione agli utenti.",
- "title": "Impostazioni di registrazione"
- },
- "OSConfiguration": {
- "menuDescription": "Consente di configurare le impostazioni che gli utenti possono usare per ripristinare Windows da un'unità flash di avvio.",
- "menuTitle": "Configurazione di ripristino del sistema operativo Windows"
- },
- "coManagementAuthorityDesc": "Consente di configurare le impostazioni di co-gestione per l'integrazione di Configuration Manager",
- "coManagementAuthorityTitle": "Impostazioni di co-gestione ",
- "deploymentProfiles": "Profili di distribuzione di Windows AutoPilot",
- "description": "Informazioni sui sette modi diversi in cui utenti o amministratori possono registrare in Intune un computer Windows 10/11.",
- "descriptionLabel": "Metodi di registrazione di Windows",
- "enrollmentStatusPage": "Pagina relativa allo stato della registrazione"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Approva automaticamente tutti gli aggiornamenti del driver consigliati",
- "manual": "Approva e distribuisci manualmente gli aggiornamenti del driver"
- },
- "BulkActions": {
- "button": "Azioni in blocco"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Metodo di approvazione:"
- },
- "DeploymentDeferralInDays": {
- "label": "Rendi disponibili gli aggiornamenti dopo",
- "units": "(giorni)",
- "value": "{0} giorni"
- },
- "DriverAction": {
- "header": "Seleziona un'azione di seguito.",
- "label": "Azione driver",
- "placeholder": "Seleziona un'azione"
- },
- "IncludedDrivers": {
- "label": "Driver inclusi"
- },
- "SelectDrivers": {
- "header": "Seleziona i driver da includere nell'azione in blocco"
- },
- "SelectDriversToInclude": {
- "button": "Seleziona i driver da includere"
- },
- "SelectLessDrivers": {
- "validation": "È possibile selezionare al massimo cento driver"
- },
- "SelectMoreDrivers": {
- "validation": "È necessario selezionare almeno un driver"
- },
- "SelectedDrivers": {
- "label": "Driver selezionati"
- },
- "availabilityDate": "Rendi disponibile in Windows Update",
- "bladeTitle": "Aggiornamenti dei driver Windows 10 e versioni successive (anteprima)",
- "lastSync": "Ultima sincronizzazione:",
- "lastSyncDefaultText": "Raccolta di inventario iniziale in sospeso",
- "loadError": "Il caricamento non è riuscito."
- },
- "DriverStatus": {
- "approved": "Approvato",
- "declined": "Rifiutato",
- "export": "Esportazione dei driver consigliati",
- "needsReview": "Verifica necessaria",
- "paused": "Sospeso"
- },
- "DriversToReview": {
- "text": "{0} da rivedere"
- },
- "Subtitle": {
- "automatic": "Criterio di aggiornamento del driver con approvazione automatica",
- "manual": "Criterio di aggiornamento del driver con approvazione manuale"
- },
- "SyncNotification": {
- "failure": "Non è possibile eseguire la sincronizzazione {0}",
- "failureDescription": "Si è verificato un errore e non è stato possibile completare la sincronizzazione richiesta. Riprovare.",
- "pending": "{0} La sincronizzazione è in corso",
- "pendingDescription": "Sono stati recuperati i dati più recenti. Questo processo può richiedere alcuni minuti.",
- "success": "La sincronizzazione {0} è stata completata",
- "successDescription": "Sincronizzazione con il servizio WUfB completata alle {0}"
- },
- "SyncSpinner": {
- "text": "È in corso una sincronizzazione. L'operazione potrebbe richiedere alcuni minuti. Cercare un avviso o riprovare tra qualche minuto."
- },
- "TabName": {
- "basics": "Informazioni di base",
- "driverUpdateSettings": "Impostazioni",
- "otherDrivers": "Altri driver",
- "properties": "Proprietà",
- "recommendedDrivers": "Driver consigliati"
- },
- "driverAddFilter": "Aggiungi filtro",
- "driverApplicableDevices": "Dispositivi applicabili",
- "driverApprovalStatus": "Stato",
- "driverBulkActions": "Azioni in blocco",
- "driverClass": "Classe driver",
- "driverCount": "Visualizzazione dei record da {0} a {1} su {2} record",
- "driverFilterNoneSelected": "Nessuna selezione",
- "driverManufacturer": "Produttore",
- "driverName": "Nome del driver",
- "driverNameLower": "distribuzione aggiornamenti driver windows",
- "driverNameUpper": "distribuzione aggiornamenti driver Windows",
- "driverRefresh": "Aggiorna",
- "driverReleaseDate": "Data di rilascio",
- "driverSearch": "Cerca",
- "driverSearchKeyword": "Immettere la parola chiave di ricerca",
- "driverVersion": "Versione",
- "firstDeploymentDate": "Prima distribuzione",
- "infoBoxText": "L'inventario può richiedere fino a 24 ore per la compilazione dopo aver assegnato e creato un criterio.",
- "textBlockText": "Selezionare l'approvazione dei criteri e le impostazioni di distribuzione. Scegliere di configurare un criterio per approvare e distribuire gli aggiornamenti automaticamente o manualmente. Il metodo di approvazione non può essere modificato dopo la creazione di un criterio, ma le modifiche alle approvazioni individuali dei driver e ai dettagli della distribuzione saranno possibili una volta compilato un inventario per i dispositivi assegnati."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Usare queste impostazioni per rimanere aggiornati su quali utenti installano app non approvate per l'uso nell'azienda. Selezionare il tipo di elenco di app con restrizioni:
\r\n App non consentite: elenco di app per cui si vogliono ricevere informazioni in caso di installazione da parte degli utenti. \r\n App approvate: elenco di app approvate per l'uso nell'azienda. Si verrà informati quando gli utenti installano un'app non inclusa in questo elenco. \r\n ",
- "androidZebraMxZebraMx": "Consente di configurare i dispositivi Zebra caricando un profilo MX in formato XML.",
- "iosDeviceFeaturesAirprint": "Usare queste impostazioni per configurare i dispositivi iOS in modo che si connettano automaticamente a stampanti compatibili con AirPrint in rete. Saranno necessari l'indirizzo IP e il percorso delle risorse delle stampanti.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Consente di configurare un'estensione dell'app che abilita l'accesso Single Sign-On per dispositivi che eseguono iOS 13.0 o versioni successive.",
- "iosDeviceFeaturesHomeScreenLayout": "Configurare il layout per le schermate di ancoraggio e iniziali nei dispositivi iOS. È possibile che per alcuni dispositivi siano previsti limiti relativi al numero di elementi visualizzabili.",
- "iosDeviceFeaturesIOSWallpaper": "Consente di visualizzare un'immagine che verrà mostrata nella schermata iniziale e/o nella schermata di blocco dei dispositivi iOS.\r\n Per visualizzare un'immagine univoca in ogni posizione, creare un profilo con l'immagine della schermata di blocco e un profilo con l'immagine della schermata iniziale.\r\n Assegnare quindi entrambi i profili agli utenti.\r\n \r\n
\r\n
Dimensioni massime file: 750 KB
\r\n
Tipo di file: PNG, JPG o JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Specificare le impostazioni di notifica per le app. Supporta iOS 9.3 e versioni successive.",
- "iosDeviceFeaturesSharedDevice": "Consente di specificare il testo facoltativo visualizzato nella schermata di blocco. Questa opzione è supportata in iOS 9.3 e versioni successive. Altre informazioni",
- "iosGeneralApplicationRestrictions": "Usare queste impostazioni per rimanere aggiornati su quali utenti installano app non approvate per l'uso nell'azienda. Selezionare il tipo di elenco di app con restrizioni:
\r\n App non consentite: elenco di app per cui si vogliono ricevere informazioni in caso di installazione da parte degli utenti. \r\n App approvate: elenco di app approvate per l'uso nell'azienda. Si verrà informati quando gli utenti installano un'app non inclusa in questo elenco. \r\n ",
- "iosGeneralApplicationVisibility": "Usare l'elenco di app visibili per specificare le app iOS che un utente è autorizzato a visualizzare o avviare. Usare l'elenco di app nascoste per specificare le app iOS che un utente non è autorizzato a visualizzare o avviare.",
- "iosGeneralAutonomousSingleAppMode": "Le app aggiunte a questo elenco e assegnate a un dispositivo possono bloccare il dispositivo, in modo che esegua solo l'app specifica dopo l'avvio oppure bloccarlo mentre è in esecuzione un'azione specifica, ad esempio un test. Al termine dell'azione o dopo la rimozione della restrizione, viene ripristinato lo stato normale del dispositivo.",
- "iosGeneralKiosk": "La modalità tutto schermo blocca diverse impostazioni in un dispositivo oppure specifica una singola app che può essere eseguita in un dispositivo. Questa opzione può essere utile in ambienti quali un punto vendita al dettaglio in cui si vuole che il dispositivo esegua solo una singola app demo.",
- "macDeviceFeaturesAirprint": "Usare queste impostazioni per configurare i dispositivi macOS per connettersi automaticamente alle stampanti compatibili con AirPrint disponibili nella rete. Sarà necessario specificare l'indirizzo IP e il percorso delle risorse delle stampanti.",
- "macDeviceFeaturesAssociatedDomains": "È possibile configurare i domini associati per la condivisione di dati e credenziali di accesso tra le app e i siti Web dell'organizzazione. Questo profilo può essere applicato a dispositivi che eseguono macOS 10.15 o versioni successive.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Consente di configurare un'estensione dell'app che abilita l'accesso Single Sign-On per dispositivi che eseguono macOS 10.15 o versioni successive.",
- "macDeviceFeaturesLoginItems": "Scegliere le app, i file e le cartelle da aprire quando gli utenti accedono ai propri dispositivi. Se non si vuole che gli utenti modifichino la modalità di apertura delle app selezionate, è possibile nascondere le app dalla configurazione utente.",
- "macDeviceFeaturesLoginWindow": "È possibile configurare l'aspetto della schermata di accesso di macOS e le funzioni disponibili per gli utenti prima e dopo l'accesso.",
- "macExtensionsKernelExtensions": "Usare queste impostazioni per configurare i criteri di estensione del kernel in dispositivi macOS che eseguono la versione 10.13.2 o successiva.",
- "macGeneralDomains": "I messaggi di posta elettronica inviati o ricevuti dall'utente che non corrispondono ai domini specificati qui verranno contrassegnati come non attendibili.",
- "windows10EndpointProtectionApplicationGuard": "Quando si usa Microsoft Edge, Microsoft Defender Application Guard protegge l'ambiente dai siti non definiti come attendibili dall'organizzazione. Quando gli utenti visitano siti non elencati nei limiti della rete isolata, tali siti verranno aperti in una sessione del browser virtuale in Hyper-V. I siti attendibili vengono definiti da un limite di rete, che può essere configurato in Configurazioni dei dispositivi. Si noti che questa funzionalità è disponibile solo per i dispositivi Windows 10 a 64 bit o versioni successive.",
- "windows10EndpointProtectionCredentialGuard": "L'abilitazione di Credential Guard abiliterà le impostazioni necessarie seguenti:\r\n \r\n
\r\n
Abilita la sicurezza basata su virtualizzazione: attiva la sicurezza basata su virtualizzazione al riavvio successivo. La sicurezza basata su virtualizzazione usa Windows Hypervisor per offrire il supporto per i servizi di sicurezza.
\r\n \r\n
Avvio protetto con accesso diretto alla memoria: attiva la sicurezza basata su virtualizzazione con l'avvio protetto e l'accesso diretto alla memoria.
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Scegliere altre app che devono essere controllate o possono essere ritenute attendibili per l'esecuzione da parte di Controllo di applicazioni di Microsoft Defender. I componenti Windows e tutte le app di Windows Store sono ritenuti automaticamente attendibili per l'esecuzione.
\r\n Le applicazioni non verranno bloccate se sono in esecuzione in modalità \"Solo controllo\". La modalità \"Solo controllo\" registra tutti gli eventi nei log locali dei client.\r\n",
- "windows10GeneralPrivacyPerApp": "Aggiungere le app che devono avere un comportamento diverso a livello di privacy rispetto a quanto definito in \"Privacy predefinita\".",
- "windows10NetworkBoundaryNetworkBoundary": "Il limite di rete è l'elenco di risorse aziendali, ad esempio il dominio ospitato sul cloud e gli intervalli di indirizzi IP per i computer inclusi nella rete aziendale. Definire i limiti di rete per applicare criteri per la protezione dei dati disponibili in tali posizioni.",
- "windowsHealthMonitoring": "Configurare i criteri di monitoraggio dello stato di Windows.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone può impedire agli utenti di installare o avviare le app specificate nell'elenco di app non consentite oppure le app non specificate nell'elenco di app approvate. Tutte le app gestite devono essere aggiunte all'elenco di app approvate."
- },
- "Inputs": {
- "accountDomain": "Dominio dell'account",
- "accountDomainHint": "Ad esempio, contosodomain",
- "accountDomainInfoBalloon": "Specificare il dominio dell'account dell'utente.",
- "accountTypeInfoBalloon": "Specificare il tipo di account da configurare in base al modello di autenticazione",
- "allowContactSetting": "Consenti all'utente di modificare l'impostazione relativa al contatto",
- "allowContactSyncInfoBalloon": "Specificare se l'utente è autorizzato a modificare l'impostazione di sincronizzazione relativa al contatto",
- "allowUserChange": "Consenti all'utente di cambiare impostazione",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Immettere un nome di pacchetto simile a com.microsoft.word",
- "androidUrlValidation": "Immettere un URL valido simile a https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "Contesto di installazione dell'app",
- "appUrlLabel": "URL di App Store",
- "appleUrlValidation": "Immettere un URL valido simile a https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Tipo di dispositivo applicabile",
- "assignmentActionLabel": "Modalità",
- "authenticationMethodInfoBalloon": "Specificare il metodo di autenticazione per l'utente",
- "authenticationMetod": "Metodo di autenticazione",
- "authenticationType": "Tipo di autenticazione",
- "authenticationTypeInfoBalloon": "Specificare il tipo di autenticazione per l'utente",
- "availableLicenseCount": "Licenze disponibili",
- "basicAuth": "Autenticazione di base",
- "biometricsInfoBalloon": "Le funzionalità di biometria, ad esempio TouchID o FaceID, possono essere obbligatorie per l'accesso degli utenti al proprio dispositivo. Quando sono obbligatorie, le funzionalità di biometria vengono usate in aggiunta al metodo di autenticazione selezionato in questo profilo. Questa impostazione non deve essere abilitata quando sono distribuiti i Criteri di protezione delle app di Intune, perché i criteri di protezione delle app includono requisiti di accesso prima dell'accesso ai dati gestiti. L'abilitazione di entrambe le opzioni provocherà la visualizzazione di più richieste di accesso per l'accesso a Outlook Mobile. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off. ",
- "bookNameLabel": "Nome del libro",
- "bundleDescriptionHint": "Immettere una descrizione che illustra le app incluse.",
- "calendar": "Calendario",
- "categoryLabel": "Categoria",
- "categoryNameLabel": "Nome predefinito",
- "certProfileType": "Tipo di profilo di certificato",
- "certificate": "Certificato",
- "certificates": "Certificati",
- "commandLineLabel": "Argomenti della riga di comando",
- "commandLineSizeHint": "La lunghezza massima del testo degli argomenti della riga di comando è di 1024 caratteri",
- "configurationSettingsFormatLabel": "Formato delle impostazioni di configurazione",
- "configurationSettingsLabel": "Formato delle impostazioni",
- "contactSync": "Salva i contatti",
- "contactSyncInfoBalloon": "Il salvataggio dei contatti nella rubrica nativa del dispositivo mobile consente il collegamento di nuove chiamate e SMS con i contatti di Outlook esistenti dell'utente. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off.",
- "contacts": "Contatti",
- "createdDateTime": "Ora di creazione",
- "defaultCategoryHint": "Non è possibile modificare le categorie predefinite",
- "deploySMimeCertsFromIntune": "Distribuisci certificati S/MIME da Intune",
- "descriptionGenericLabel": "Descrizione",
- "descriptionHint": "Immettere una descrizione...",
- "descriptionLabel": "Descrizione",
- "descriptionSizeHint": "La lunghezza della descrizione non deve superare i 10.000 caratteri",
- "developerLabel": "Developer",
- "developerSizeHint": "La lunghezza massima del nome dello sviluppatore è di 256 caratteri.",
- "disable": "Disabilita",
- "disabled": "Disabilitata",
- "displayNameLabel": "Nome",
- "displayVersionHint": "Immettere la versione dell'app",
- "displayVersionLabel": "Versione dell'app",
- "displayVersionLengthCheck": "La lunghezza della versione visualizzata deve essere un massimo di 130 caratteri",
- "eBookCategoryNameLabel": "Nome predefinito",
- "emailAccount": "Nome dell'account di posta elettronica",
- "emailAccountHint": "Ad esempio posta elettronica aziendale",
- "emailAccountInfoBalloon": "Specificare il nome visualizzato per l'account di posta elettronica che verrà mostrato agli utenti nei rispettivi dispositivi",
- "emailAddressAttribute": "Attributo indirizzo e-mail dall'ID Microsoft Entra",
- "emailAddressInfoBalloon": "Specificare l'indirizzo di posta elettronica da usare per inviare e ricevere messaggi",
- "emailServer": "Server di posta elettronica",
- "emailServerHint": "Ad esempio, mail.contoso.com",
- "emailServerInfoBalloon": "Specificare il nome host del server Exchange",
- "enable": "Abilita",
- "enableSMime": "Abilita S/MIME",
- "enabled": "Attivato",
- "encryptAllEmails": "Crittografa tutti i messaggi di posta elettronica",
- "encryptionCertificates": "Certificati di crittografia",
- "endUserNotifications": "Notifiche per l'utente finale",
- "enrollmentTypeLabel": "Tipo di registrazione del dispositivo",
- "externalRecipients": "Avviso messaggio per destinatari esterni",
- "externalRecipientsInfoBalloon": "L'Avviso messaggio per destinatari esterni viene visualizzato se il mittente aggiunge un destinatario esterno o se aggiunge un gruppo di distribuzione che include destinatari esterni. Questo avviso messaggio segnala ai mittenti se il messaggio che stanno scrivendo uscirà dall'organizzazione, aiutandoli a prendere le decisioni appropriate a livello di formulazione, tono e contenuto. Disponibile solo per account Exchange Online e account locali che sfruttano i vantaggi dell'autenticazione moderna ibrida. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è On.",
- "focusedInbox": "Posta in arrivo evidenziata",
- "focusedInboxInfoBalloon": "Posta in arrivo evidenziata separa la cartella della posta in arrivo in due schede: Evidenziata e Altra. I messaggi di posta elettronica più importanti si trovano nella scheda Evidenziata, mentre gli altri messaggi rimangono facilmente accessibili, ma non visualizzati, nella scheda Altra. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off. ",
- "fullScreenEnabledLabel": "Schermo intero",
- "gmailNineAmountOfEmail": "Numero di messaggi di posta elettronica da sincronizzare",
- "gmailNineAuthenticationMethodInfoBalloon": "Selezionare la modalità di autenticazione degli utenti al server di posta elettronica. Usare i certificati per fornire agli utenti finali l'esperienza più facile e sicura. L'autenticazione basata su certificati non è ancora disponibile perché i profili dei certificati SCEP e PKCS per i dispositivi dei proprietari di dispositivi non sono ancora disponibili.",
- "gmailNineCertificateUPNInfoBalloon": "Il certificato deve includere un nome dell'entità utente come nome alternativo del soggetto.",
- "gmailNineEmailAddressInfoBalloon": "L'attributo che Intune ottiene dall'ID Microsoft Entra per generare dinamicamente l'indirizzo e-mail che verrà usato dal profilo, ad esempio MyName@contoso.com (UPN). Ulteriori informazioni sugli attributi di Microsoft Entra per i profili di posta elettronica.",
- "gmailNineEmailServerInfoBalloon": "Posizione di Exchange (URL) del server di posta elettronica a cui l'app specificata si connette per ottenere i messaggi.",
- "gmailNineEmailSynchronizeInfoBalloon": "Consente di controllare la quantità di posta elettronica che verrà sincronizzata dal client.",
- "gmailNineSSLInfoBalloon": "Abilitare SSL per proteggere tutte le comunicazioni con il server di posta elettronica.",
- "gmailNineUsernameInfoBalloon": "L'attributo che Intune ottiene dall'ID Microsoft Entra per generare dinamicamente il nome utente che verrà usato dal profilo, ad esempio MyName@contoso.com (UPN) o MyName (nome utente). Ulteriori informazioni sugli attributi di Microsoft Entra per i profili di posta elettronica.",
- "ignoreManifestScope": "Ignora ambito manifesto",
- "ignoreVersionDetection": "Ignora la versione dell'app",
- "informationUrlLabel": "URL di informazioni",
- "informationUrlSizeHint": "La lunghezza massima dell’URL delle informazioni è di 1024 caratteri.",
- "installAsManaged": "Installa come gestita",
- "installationSourceLabel": "Tipo di app",
- "installerTypeInfoBalloon": "Tipo di programma di installazione del pacchetto dell'applicazione.",
- "installerTypeLabel": "Tipo di programma di installazione",
- "isFeatured": "Mostra l'app come app in primo piano nel Portale aziendale",
- "isMAMEnabledToggleLabel": "Sì",
- "lastModifiedDateTime": "Ora dell'ultimo aggiornamento",
- "ldapUrl": "URL LDAP",
- "licensingType": "Supporta l'assegnazione di contesto di dispositivo",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Sistema operativo minimo",
- "modernAuth": "Autenticazione moderna",
- "nameHint": "Immettere un nome",
- "nameLabel": "Nome",
- "nameSizeHint": "La lunghezza massima del nome è di 512 caratteri.",
- "notConfigured": "Non configurato",
- "notesLabel": "Note",
- "notesSizeHint": "La lunghezza massima del testo delle note è di 1024 caratteri.",
- "notificationType": "Tipo di notifica",
- "oneDay": "Un giorno",
- "oneMonth": "Un mese",
- "oneWeek": "Una settimana",
- "outlookSMimeSettings": "Impostazioni di S/MIME per Outlook",
- "ownerLabel": "Proprietario",
- "ownerSizeHint": "La lunghezza massima del nome del proprietario è di 256 caratteri.",
- "packageIdLabel": "Identificatore pacchetto",
- "packageNameLabel": "Nome del pacchetto",
- "pivCredentialNotConfigured": "Non è stato selezionato alcun emittente delle credenziali derivate per il tenant. Sarà necessario configurarne uno per potere applicare questo criterio ai dispositivi.",
- "platformLabel": "Piattaforma",
- "policyDescriptionLabel": "Descrizione",
- "policyNameLabel": "Nome",
- "preComposedIconEnabled": "Precomposti",
- "primarySMTPAddress": "Indirizzo SMTP primario",
- "privacyUrlLabel": "URL privacy",
- "publisherHint": "Immettere il nome di un server di pubblicazione",
- "publisherLabel": "Server di pubblicazione",
- "publisherSizeHint": "La lunghezza del nome dell'entità di pubblicazione deve essere compresa tra 2 e 1024 caratteri (inclusi)",
- "require": "Rendi obbligatorio",
- "requireBiometrics": "Rendi obbligatori i dati biometrici per l'accesso all'app",
- "sAMAccountName": "Nome account SAM",
- "scopeTagsRequired": "È necessario almeno un tag di ambito",
- "searchAppLabel": "Selezionare l'app",
- "searchAppLinkText": "Cerca in App Store",
- "searchWinGetPublicRepositoryLinkText": "Cerca nel repository della community Gestione pacchetti Windows",
- "searchWinGetStoreRepositoryLinkText": "Cerca nell'app Microsoft Store (novità)",
- "selectAAD": "Selezionare un attributo Microsoft Entra",
- "selectAppFileLabel": "Seleziona file",
- "selectAppFileLinkText": "Selezionare il file del pacchetto di app",
- "selectAppFileToUpdateLabel": "Selezionare il file da aggiornare",
- "selectAuthMethod": "Selezionare un metodo di autenticazione",
- "selectAuthType": "Selezionare un tipo di autenticazione",
- "selectCatalogAppLabel": "Selezionare l'app",
- "selectCatalogAppLinkText": "Cercare nel Catalogo app aziendali",
- "selectCertificate": "Selezionare un certificato",
- "signAllEmails": "Firma tutti i messaggi di posta elettronica",
- "signingCertificates": "Certificati di firma",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Descrizione della suite",
- "suiteNameLabel": "Nome della suite",
- "targetApplicationBundleIdentifier": "Identificatore del bundle dell'applicazione di destinazione",
- "targetedPlatformsLabel": "Piattaforma interessata",
- "tasks": "Attività",
- "threeDays": "Tre giorni",
- "totalLicenseCount": "Totale licenze",
- "twoWeeks": "Due settimane",
- "unifiedAssignmentsLabel": "Assegna a:",
- "unlimited": "Senza limiti",
- "urlHint": "Immettere un URL valido",
- "useManagedBrowserHint": "Solo Android e iOS. Altre informazioni",
- "useManagedBrowserLabel": "Richiedi un browser gestito per l'apertura del collegamento",
- "userPrinicipalName": "Nome entità utente",
- "username": "Nome utente",
- "usernameAttribute": "Attributo nome utente dall’ID Microsoft Entra",
- "usernameAttributreInfoBalloon": "Specificare il nome dell'entità utente per il profilo di posta elettronica che verrà usato per l'autenticazione dell'account",
- "usernamePassword": "Nome utente e password",
- "webAppUrlHint": "Immettere un URL valido che inizia con http:// o https://",
- "webAppUrlLabel": "URL app",
- "webAppUrlSizeHint": "La lunghezza massima dell’URL app è di 1024 caratteri.",
- "windowsUrlValidation": "Immettere un URL valido simile a https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "Dati XML immessi",
- "xmlFormatInvalid": "Il formato del criterio XML non è valido.",
- "xmlTooLarge": "Le dimensioni dell'input devono essere inferiori a 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Non è stato possibile eliminare {0}",
- "failureCa": "Non è stato possibile eliminare {0} perché i criteri CA vi fanno riferimento",
- "modifying": "Eliminazione di {0} in corso",
- "success": "L'eliminazione di {0} è stata completata"
- },
- "Notify": {
- "failure": "Non è stato possibile aggiornare {0}",
- "modifying": "Modifica di {0}",
- "success": "L'aggiornamento di {0} è stato completato"
- },
- "menuLabel": "Contesto di autenticazione"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Altre informazioni su come richiedere metodi di autenticazione soddisfatti dai provider di federazione.",
- "certificate": "Autenticazione del certificato",
- "infoBubble": "Specificare il metodo di autenticazione richiesto, che dovrà essere soddisfatto dal provider di servizi di federazione, ad esempio AD FS.",
- "multifactor": "Autenticazione a più fattori",
- "require": "Richiedi un metodo di autenticazione federato (anteprima)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "I criteri per le sessioni del browser persistenti funzionano correttamente solo se è selezionata l'opzione \"Tutte le app cloud\". Aggiornare la selezione delle app cloud."
- },
- "Option": {
- "always": "Sempre persistente",
- "help": "Una sessione del browser persistente consente agli utenti di rimanere connessi dopo la chiusura e la riapertura della finestra del browser. \n
\n
Questa impostazione funziona correttamente quando è selezionata l'opzione \"Tutte le app cloud\"
\n
Questo non influisce sulle durate dei token o sull'impostazione della frequenza di accesso.
\n
Questa impostazione eseguirà l'override del criterio \"Mostra l'opzione per rimanere connesso\" nelle Informazioni personalizzate distintive dell'azienda.
\n
L'opzione \"Mai persistente\" eseguirà l'override delle eventuali attestazioni di accesso SSO persistenti passate dai servizi di autenticazione federata.
\n
L'impostazione \"Mai persistente\" bloccherà l'accesso SSO nei dispositivi mobili per le applicazioni e tra le applicazioni e il browser del dispositivo mobile dell'utente.
\n",
- "label": "Sessione del browser persistente",
- "never": "Mai persistente"
- },
- "Warning": {
- "allApps": "La sessione del browser persistente funziona correttamente solo quando è selezionata l'opzione Tutte le app cloud. Modificare la selezione delle app cloud. Fare clic qui per altre informazioni."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Ore o giorni",
- "value": "Frequenza"
- },
- "Option": {
- "Day": {
- "plural": "{0} giorni",
- "singular": "1 giorno"
- },
- "Hour": {
- "plural": "{0} ore",
- "singular": "1 ora"
- },
- "daysOption": "Giorni",
- "everytime": "Ogni volta",
- "help": "Periodo di tempo prima che all'utente venga richiesto di eseguire nuovamente l'accesso quando tenta di accedere a una risorsa. L'impostazione predefinita è una finestra mobile di 90 giorni, ovvero agli utenti verrà chiesto di eseguire di nuovo l'autenticazione al primo tentativo di accedere a una risorsa dopo un periodo di inattività nel proprio computer di 90 o più giorni.",
- "hoursOption": "Ore",
- "label": "Frequenza di accesso",
- "placeholder": "Selezionare le unità"
- }
- },
- "mainOption": "Modifica durata sessione",
- "mainOptionHelp": "Configurare la frequenza delle richieste ricevute dagli utenti e indicare se le sessioni del browser saranno persistenti o meno. Le applicazioni che non supportano i protocolli di autenticazione moderna potrebbero non rispettare tali criteri. In questi casi, contattare lo sviluppatore applicazione."
- },
- "SingleSelectorActive": {
- "failed": "Non è possibile caricare questi dati.",
- "reattempt": "Caricamento dati. Tentativo {0} di {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Scegliere i ruoli della directory"
- },
- "Excluded": {
- "gridAria": "Elenco di utenti esclusi"
- },
- "Included": {
- "gridAria": "Elenco di utenti inclusi"
- },
- "Validation": {
- "customRoleIncluded": "\"Ruoli della directory\" include almeno un ruolo personalizzato",
- "customRoleSelected": "È stato selezionato almeno un ruolo personalizzato",
- "failed": "È necessario configurare \"{0}\"",
- "roles": "Selezionare almeno un ruolo",
- "usersGroups": "Selezionare almeno un utente o gruppo"
- },
- "learnMore": "Controllare l'accesso in base all'utente a cui verranno applicati i criteri, ad esempio utenti e gruppi, identità dei carichi di lavoro, ruoli della directory o guest esterni."
- },
- "advancedTabText": "Avanzate",
- "allCloudAppsErrorBox": "È necessario selezionare \"Tutte le app cloud\" quando è selezionata la concessione \"Richiedi modifica password\"",
- "allCloudAppsReauth": "\"Tutte le app cloud\" deve essere selezionato quando sono selezionati il controllo della sessione \"Frequenza di accesso ogni volta\" e la condizione \"Rischio di accesso\"",
- "allCloudOrSpecificApps": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" richiede la selezione di \"Tutte le app cloud\" o di app supportarte specifiche",
- "allDayCheckboxLabel": "Tutto il giorno",
- "allDevicePlatforms": "Qualsiasi dispositivo",
- "allGuestUserInfoContent": "Include i guest di Microsoft Entra B2B ma non i guest di SharePoint B2B",
- "allGuestUserLabel": "Tutti gli utenti guest ed esterni",
- "allRiskLevelsOption": "Tutti i livelli di rischio",
- "allTrustedLocationLabel": "Tutte le posizioni attendibili",
- "allUserGroupSetSelectorLabel": "Tutti gli utenti e i gruppi selezionati",
- "allUsersReauth": "Il controllo sessione di \"Frequenza di accesso ogni volta\" richiede la selezione del controllo sessione \"Tutti gli utenti\"",
- "allUsersString": "Tutti gli utenti",
- "and": "{0} AND {1} ",
- "andWithGrouping": "({0}) E {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Qualsiasi app cloud",
- "appContextOptionInfoContent": "Tag di autenticazione richiesto",
- "appContextOptionLabel": "Tag di autenticazione richiesto (anteprima)",
- "appContextUriPlaceholder": "Ad esempio: uri:contoso.com:level3",
- "appEnforceInfoBubble": "Le restrizioni imposte dalle app potrebbero richiedere configurazioni amministrative aggiuntive nelle app cloud. Le restrizioni avranno effetto solo per le nuove sessioni.",
- "appNotSetSeletorLabel": "0 app cloud selezionate",
- "appReauthNotSupported": "Questa app non supporta il controllo della sessione \"Frequenza di accesso sempre\".",
- "applyConditionClientAppInfoBalloonContent": "Consente di configurare le app client per applicare i criteri ad app client specifiche",
- "applyConditionDevicePlatformInfoBalloonContent": "Consente di configurare le piattaforme dei dispositivi per applicare i criteri a piattaforme specifiche",
- "applyConditionDeviceStateInfoBalloonContent": "Consente di configurare lo stato dei dispositivi per applicare i criteri a stati dei dispositivi specifici",
- "applyConditionLocationInfoBalloonContent": "Consente di configurare le posizioni per applicare i criteri alle posizioni attendibili/non attendibili",
- "applyConditionSigninRiskInfoBalloonContent": "Consente di configurare il rischio di accesso per applicare i criteri ai livelli di rischio selezionati",
- "applyConditionUserRiskInfoBalloonContent": "Configura il rischio utente per applicare i criteri ai livelli di rischio selezionati",
- "applyConditonLabel": "Configura",
- "ariaLabelPolicyDisabled": "Criteri disabilitati",
- "ariaLabelPolicyEnabled": "Criteri abilitati",
- "ariaLabelPolicyReportOnly": "Il criterio è in modalità solo report",
- "blockAccess": "Blocca accesso",
- "builtInDirectoryRoleLabel": "Ruoli predefiniti della directory",
- "casCustomControlInfo": "I criteri personalizzati devono essere configurati nel portale di Cloud App Security. Questo controllo è attivo immediatamente per le app in primo piano ed è possibile eseguirne l'onboarding automatico per qualsiasi app. Fare clic qui per ottenere informazioni su entrambi gli scenari.",
- "casInfoBubble": "Questo controllo funziona per diverse app cloud.",
- "casPreconfiguredControlInfo": "Questo controllo è attivo immediatamente per le app in primo piano ed è possibile eseguirne l'onboarding automatico per qualsiasi app. Fare clic qui per ottenere informazioni su entrambi gli scenari.",
- "cert64DownloadCol": "Scarica certificato Base64",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Scarica certificato",
- "certDurationCol": "Scadenza",
- "certDurationStartCol": "Valido dal",
- "certName": "VpnCert",
- "certainApps": "Solo determinate app sono supportate per \"Frequenza di accesso ogni volta\" se non sono selezionate le concessioni \"Richiedi l'autenticazione a più fattori\" e \"Richiedi la modifica della password\"",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Scegliere le applicazioni",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Applicazioni scelte",
- "chooseApplicationsEmpty": "Nessuna applicazione",
- "chooseApplicationsNone": "Nessuno",
- "chooseApplicationsNoneFound": "L'applicazione \"{0}\" non è stata trovata. Provare con un altro nome o ID.",
- "chooseApplicationsPlural": "{0} e altre {1}",
- "chooseApplicationsReAuthEverytimeInfo": "Se si cerca la propria app, alcune applicazioni non possono essere usate con il controllo di sessione \"Richiedi riautenticazione – Sempre\"",
- "chooseApplicationsRemove": "Rimuovi",
- "chooseApplicationsReturnedPlural": "{0} applicazioni trovate",
- "chooseApplicationsReturnedSingular": "1 applicazione trovata",
- "chooseApplicationsSearchBalloon": "Per cercare un'applicazione, immettere il nome o l'ID corrispondente.",
- "chooseApplicationsSearchHint": "Cerca applicazioni...",
- "chooseApplicationsSearchLabel": "Applicazioni",
- "chooseApplicationsSearching": "Ricerca...",
- "chooseApplicationsSelect": "Seleziona",
- "chooseApplicationsSelected": "Selezionato",
- "chooseApplicationsSingular": "{0} e 1 altra",
- "chooseApplicationsTooMany": "Sono presenti altri risultati da visualizzare. Per filtrarli, usare la casella di ricerca.",
- "chooseLocationCorpnetItem": "Rete aziendale",
- "chooseLocationSelectedLocationsLabel": "Località selezionate",
- "chooseLocationTrustedIpsItem": "Indirizzi IP attendibili per l'autenticazione a più fattori",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Scegliere le località",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Località scelte",
- "chooseLocationsEmpty": "Nessuna località",
- "chooseLocationsExcludedSelectorTitle": "Seleziona",
- "chooseLocationsIncludedSelectorTitle": "Seleziona",
- "chooseLocationsNone": "Nessuno",
- "chooseLocationsNoneFound": "L'applicazione \"{0}\" non è stata trovata. Provare con un altro nome o ID.",
- "chooseLocationsPlural": "{0} e altre {1}",
- "chooseLocationsRemove": "Rimuovi",
- "chooseLocationsReturnedPlural": "{0} località trovate",
- "chooseLocationsReturnedSingular": "1 località trovata",
- "chooseLocationsSearchBalloon": "Per cercare una località, immettere il nome corrispondente.",
- "chooseLocationsSearchHint": "Cerca località...",
- "chooseLocationsSearchLabel": "Percorsi",
- "chooseLocationsSearching": "Ricerca...",
- "chooseLocationsSelect": "Seleziona",
- "chooseLocationsSelected": "Selezionato",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Seleziona",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Seleziona",
- "chooseLocationsSingular": "{0} e 1 altra",
- "chooseLocationsTooMany": "Sono presenti altri risultati da visualizzare. Per filtrarli, usare la casella di ricerca.",
- "claimProviderAddCommandText": "Nuovo controllo personalizzato",
- "claimProviderAddNewBladeTitle": "Nuovo controllo personalizzato",
- "claimProviderDeleteCommand": "Elimina",
- "claimProviderDeleteDescription": "Eliminare '{0}'? Questa azione non può essere annullata.",
- "claimProviderDeleteTitle": "Continuare?",
- "claimProviderEditInfoText": "Immettere il JSON per controlli personalizzati fornito dai provider di attestazioni.",
- "claimProviderNotificationCreateDescription": "Creazione del controllo personalizzato denominato '{0}'",
- "claimProviderNotificationCreateFailedDescription": "La creazione del controllo personalizzato '{0}' non è riuscita. Riprovare più tardi.",
- "claimProviderNotificationCreateFailedTitle": "Non è stato possibile creare il controllo personalizzato",
- "claimProviderNotificationCreateSuccessDescription": "Il controllo personalizzato denominato '{0}' è stato creato",
- "claimProviderNotificationCreateSuccessTitle": "La rete '{0}' è stata creata",
- "claimProviderNotificationCreateTitle": "Creazione della rete '{0}'",
- "claimProviderNotificationDeleteDescription": "Eliminazione del controllo personalizzato denominato '{0}'",
- "claimProviderNotificationDeleteFailedDescription": "L'eliminazione del controllo personalizzato '{0}' non è riuscita. Riprovare più tardi.",
- "claimProviderNotificationDeleteFailedTitle": "Non è stato possibile eliminare il controllo personalizzato",
- "claimProviderNotificationDeleteSuccessDescription": "Il controllo personalizzato denominato '{0}' è stato eliminato",
- "claimProviderNotificationDeleteSuccessTitle": "La rete '{0}' è stata eliminata",
- "claimProviderNotificationDeleteTitle": "Eliminazione di '{0}'",
- "claimProviderNotificationUpdateDescription": "Aggiornamento del controllo personalizzato denominato '{0}'",
- "claimProviderNotificationUpdateFailedDescription": "L'aggiornamento del controllo personalizzato '{0}' non è riuscito. Riprovare più tardi.",
- "claimProviderNotificationUpdateFailedTitle": "Non è stato possibile aggiornare il controllo personalizzato",
- "claimProviderNotificationUpdateSuccessDescription": "Il controllo personalizzato denominato '{0}' è stato aggiornato",
- "claimProviderNotificationUpdateSuccessTitle": "La rete '{0}' è stata aggiornata",
- "claimProviderNotificationUpdateTitle": "Aggiornamento della rete '{0}'",
- "claimProviderValidationAppIdInvalid": "Il valore \"AppId\" non è valido. Controllare e riprovare.",
- "claimProviderValidationClientIdMissing": "Nei dati manca un valore \"ClientId\". Controllare e riprovare.",
- "claimProviderValidationControlClaimsRequestedMissing": "In \"Control\" manca un valore \"ClaimsRequested\". Controllare e riprovare.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "Nell'elemento \"ClaimsRequested\" manca un valore \"Type\". Controllare e riprovare.",
- "claimProviderValidationControlIdAlreadyExists": "Il valore \"Id\" in \"Control\" esiste già. Controllare e riprovare.",
- "claimProviderValidationControlIdMissing": "In \"Control\" manca un valore \"Id\". Controllare e riprovare.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "Non è possibile rimuovere il valore \"Id\" da \"Control\" perché vi fanno riferimento criteri esistenti. Rimuovere prima il valore dai criteri.",
- "claimProviderValidationControlIdTooManyControls": "La proprietà \"Control\" contiene troppi controlli. Verificare e riprovare.",
- "claimProviderValidationControlIdValueReserved": "Il valore \"Id\" in \"Control\" è una parola chiave riservata. Usare un ID diverso.",
- "claimProviderValidationControlNameAlreadyExists": "Il valore \"Name\" in \"Control\" esiste già. Controllare e riprovare.",
- "claimProviderValidationControlNameMissing": "In \"Control\" manca un valore \"Name\". Controllare e riprovare.",
- "claimProviderValidationControlsMissing": "Nei dati manca un valore \"Controls\". Controllare e riprovare.",
- "claimProviderValidationDiscoveryUrlMissing": "Nei dati manca un valore \"DiscoveryUrl\". Controllare e riprovare.",
- "claimProviderValidationInvalid": "I dati specificati non sono validi. Controllare e riprovare.",
- "claimProviderValidationInvalidJsonDefinition": "Non è possibile salvare il controllo personalizzato. Esaminare il testo JSON e riprovare.",
- "claimProviderValidationNameAlreadyExists": "Il valore \"Name\" esiste già. Controllare e riprovare.",
- "claimProviderValidationNameMissing": "Nei dati manca un valore \"Name\". Controllare e riprovare.",
- "claimProviderValidationUnknown": "Si è verificato un errore sconosciuto durante la convalida dei dati specificati. Controllare e riprovare.",
- "claimProvidersNone": "Non sono presenti controlli personalizzati",
- "claimProvidersSearchPlaceholder": "Cerca i controlli.",
- "classicPoilcyFilterTitle": "Mostra",
- "classicPolicyAllPlatforms": "Tutte le piattaforme",
- "classicPolicyClientAppBrowserAndNative": "Browser, app per dispositivi mobili e client desktop",
- "classicPolicyCloudAppTitle": "Applicazione cloud",
- "classicPolicyControlAllow": "Consenti",
- "classicPolicyControlBlock": "Blocca",
- "classicPolicyControlBlockWhenNotAtWork": "Blocca l'accesso quando non al lavoro",
- "classicPolicyControlRequireCompliantDevice": "Richiedi un dispositivo conforme",
- "classicPolicyControlRequireDomainJoinedDevice": "Richiedi dispositivo aggiunto a un dominio",
- "classicPolicyControlRequireMfa": "Richiedere l'autenticazione a più fattori",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Richiedi autenticazione a più fattori quando non al lavoro",
- "classicPolicyDeleteCommand": "Elimina",
- "classicPolicyDeleteFailTitle": "Non è stato possibile eliminare i criteri classici",
- "classicPolicyDeleteInProgressTitle": "Eliminazione dei criteri classici",
- "classicPolicyDeleteSuccessTitle": "I criteri classici sono stati eliminati",
- "classicPolicyDetailBladeTitle": "Dettagli",
- "classicPolicyDisableCommand": "Disabilita",
- "classicPolicyDisableConfirmation": "Disabilitare '{0}'? Questa azione non può essere annullata.",
- "classicPolicyDisableFailDescription": "Non è stato possibile disabilitare '{0}'",
- "classicPolicyDisableFailTitle": "Non è stato possibile disabilitare i criteri classici",
- "classicPolicyDisableInProgressDescription": "Disabilitazione di '{0}'",
- "classicPolicyDisableInProgressTitle": "Disabilitazione dei criteri classici",
- "classicPolicyDisableSuccessDescription": "La disabilitazione di '{0}' è riuscita",
- "classicPolicyDisableSuccessTitle": "I criteri classici sono stati disabilitati",
- "classicPolicyEasSupportedPlatforms": "Piattaforme supportate per Exchange ActiveSync",
- "classicPolicyEasUnsupportedPlatforms": "Piattaforme non supportate per Exchange ActiveSync",
- "classicPolicyExcludedPlatformsTitle": "Piattaforme dispositivo escluse",
- "classicPolicyFilterAll": "Tutti i criteri",
- "classicPolicyFilterDisabled": "Criteri disabilitati",
- "classicPolicyFilterEnabled": "Criteri abilitati",
- "classicPolicyIncludeExcludeMembersDescription": "Escludendo i gruppi, è possibile eseguire la migrazione a fasi dei criteri.",
- "classicPolicyIncludeExcludeMembersTitle": "Includi/Escludi gruppi",
- "classicPolicyIncludedPlatformsTitle": "Piattaforme dispositivo incluse",
- "classicPolicyManualMigrationMessage": "Per questi criteri è necessario procedere alla migrazione manuale.",
- "classicPolicyMigrateCommand": "Esegui la migrazione",
- "classicPolicyMigrateConfirmation": "Eseguire la migrazione di '{0}'? La migrazione di questi criteri può essere eseguita solo una volta.",
- "classicPolicyMigrateFailDescription": "Non è stato possibile eseguire la migrazione di '{0}'",
- "classicPolicyMigrateFailTitle": "La migrazione dei criteri classici non è riuscita",
- "classicPolicyMigrateInProgressDescription": "Migrazione di '{0}'",
- "classicPolicyMigrateInProgressTitle": "Migrazione dei criteri classici",
- "classicPolicyMigrateRecommendText": "Raccomandazione: eseguire la migrazione ai criteri del nuovo portale di Azure.",
- "classicPolicyMigrateSuccessTitle": "La migrazione dei criteri classici è riuscita",
- "classicPolicyMigratedSuccessDescription": "È ora possibile gestire questi criteri classici in Criteri.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "La migrazione di questi criteri classici è stata eseguita come {0} nuovi criteri. È possibile gestire i nuovi criteri in Criteri.",
- "classicPolicyNoEditPermissionMsg": "Non si è autorizzati a modificare questi criteri. Solo gli amministratori globali e gli amministratori della sicurezza possono modificarli. Fare clic qui per altre informazioni.",
- "classicPolicySaveFailDescription": "Non è stato possibile salvare '{0}'",
- "classicPolicySaveFailTitle": "Non è stato possibile salvare i criteri classici",
- "classicPolicySaveInProgressDescription": "Salvataggio di '{0}'",
- "classicPolicySaveInProgressTitle": "Salvataggio dei criteri classici",
- "classicPolicySaveSuccessDescription": "Il salvataggio di '{0}' è riuscito",
- "classicPolicySaveSuccessTitle": "I criteri classici sono stati salvati",
- "clientAppBladeLegacyInfoBanner": "L'autorizzazione legacy non è attualmente supportata",
- "clientAppBladeLegacyUpsellBanner": "Blocca app client non supportate (anteprima)",
- "clientAppBladeTitle": "App client",
- "clientAppDescription": "Selezionare le app client a cui verranno applicati questi criteri",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync non supporta tutte le altre condizioni in questo momento",
- "clientAppLearnMore": "È possibile controllare l'accesso utente per applicarlo ad applicazioni client specifiche che non usano l'autenticazione moderna.",
- "clientAppLegacyHeader": "Client con autenticazione legacy",
- "clientAppMobileDesktop": "App per dispositivi mobili e client desktop",
- "clientAppModernHeader": "Client con autenticazione moderna",
- "clientAppOnlySupportedPlatforms": "Applica i criteri solo alle piattaforme supportate",
- "clientAppSelectSpecificClientApps": "Selezionare le app client",
- "clientAppWebBrowser": "Browser",
- "clientAppsSelectedLabel": "{0} inclusi",
- "clientTypeBrowser": "Browser",
- "clientTypeEas": "Client Exchange ActiveSync",
- "clientTypeEasInfo": "Client Exchange ActiveSync che usano solo l'autenticazione legacy.",
- "clientTypeModernAuth": "Client con autenticazione moderna",
- "clientTypeOtherClients": "Altri client",
- "clientTypeOtherClientsInfo": "Sono inclusi i client Office precedenti e altri protocolli di posta elettronica (POP, IMAP, SMTP e così via). [Altre informazioni][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "{0} app cloud configurate in questo criterio sono state eliminate dalla directory, ma questo non influisce sulle altre app nel criterio. All'aggiornamento successivo della sezione del criterio relativa all'applicazione, le app eliminate verranno automaticamente rimosse.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Tutte le app Microsoft",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Consenti app cloud, desktop e per dispositivi mobili Microsoft (anteprima)",
- "cloudappsSelectionBladeAllCloudapps": "Tutte le app cloud",
- "cloudappsSelectionBladeExcludeDescription": "Selezionare le app cloud da escludere dai criteri",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Seleziona app cloud escluse",
- "cloudappsSelectionBladeIncludeDescription": "Selezionare le app cloud a cui verranno applicati questi criteri",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Seleziona",
- "cloudappsSelectionBladeSelectedCloudapps": "Selezionare le app",
- "cloudappsSelectorInfoBallonText": "Servizi a cui accede l'utente per svolgere il lavoro. Ad esempio, 'Salesforce'",
- "cloudappsSelectorPluralExcluded": "{0} app escluse",
- "cloudappsSelectorPluralIncluded": "{0} app incluse",
- "cloudappsSelectorSingularExcluded": "1 app esclusa",
- "cloudappsSelectorSingularIncluded": "1 app inclusa",
- "cloudappsSelectorUserPlural": "{0} app",
- "cloudappsSelectorUserSingular": "1 app",
- "conditionLabelMulti": "{0} condizioni selezionate",
- "conditionLabelOne": "1 condizione selezionata",
- "conditionalAccessBladeTitle": "Accesso condizionale",
- "conditionsNotSelectedLabel": "Non configurato",
- "conditionsReqMfaReauthSet": "Alcune opzioni non sono disponibili a causa della concessione \"Richiedi l'autenticazione a più fattori\" e del controllo della sessione \"Frequenza di accesso ogni volta\" attualmente selezionato",
- "conditionsReqPwSet": "Alcune opzioni non sono disponibili perché è attualmente selezionata la concessione \"Richiedi modifica password\"",
- "configureCasText": "Configura Cloud App Security",
- "configureCustomControlsText": "Configura criteri personalizzati",
- "controlLabelMulti": "{0} controlli selezionati",
- "controlLabelOne": "1 controllo selezionato",
- "controlValidatorText": "Selezionare almeno un controllo",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Altre informazioni su come richiedere dispositivi conformi.",
- "controlsDeviceComplianceInfoBubble": "Il dispositivo deve essere compatibile con Intune. In caso contrario, all'utente verrà chiesto di rendere compatibile il dispositivo.",
- "controlsDomainJoinedAriaLabel": "Scopri di più su come richiedere dispositivi aggiunti a Microsoft Entra ibrido.",
- "controlsDomainJoinedInfoBubble": "I dispositivi devono essere aggiunti a Microsoft Entra ibrido.",
- "controlsMamAriaLabel": "Altre informazioni su come richiedere applicazioni client approvate.",
- "controlsMamInfoBubble": "Il dispositivo deve usare queste applicazioni client approvate.",
- "controlsMfaInfoBubble": "L'utente deve completare requisiti di sicurezza aggiuntivi, ad esempio telefonata, SMS",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Altre informazioni su come richiedere app protette da criteri.",
- "controlsRequireCompliantAppInfoBubble": "Il dispositivo deve usare app protette da criteri.",
- "controlsRequirePasswordResetAriaLabel": "Altre informazioni su come richiedere una modifica della password.",
- "controlsRequirePasswordResetInfoBubble": "Richiedere la modifica della password per ridurre il rischio utente. Questa opzione richiede anche l’autenticazione a più fattori. Non è possibile usare altri controlli.",
- "countriesRadiobuttonInfoBalloonContent": "Il paese/area geografica da cui proviene l'accesso è determinato dall'indirizzo IP dell'utente.",
- "createNewVpnCert": "Nuovo certificato",
- "createdTimeLabel": "Ora di creazione",
- "customRoleLabel": "Ruoli personalizzati (non supportati)",
- "dateRangeTypeLabel": "Intervallo di date",
- "daysOfWeekPlaceholderText": "Filtro per i giorni della settimana",
- "daysOfWeekTypeLabel": "Giorni della settimana",
- "deletePolicyNoLicenseText": "È possibile eliminare subito questo criterio. Dopo l'eliminazione, sarà possibile ricrearlo solo quando saranno disponibili le licenze necessarie.",
- "descriptionContentForControlsAndOr": "Per più controlli",
- "devicePlatform": "Piattaforma del dispositivo",
- "devicePlatformConditionHelpDescription": "Consente di applicare il criterio alle piattaforme del dispositivo selezionate.\n[Altre informazioni][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} inclusi",
- "devicePlatformIncludeExclude": "{0} e {1} escluse",
- "devicePlatformNoSelectionError": "Alcune piattaforme del dispositivo richiedono la selezione di un elemento secondario.",
- "devicePlatformsNone": "Nessuno",
- "deviceSelectionBladeExcludeDescription": "Selezionare le piattaforme da escludere dai criteri",
- "deviceSelectionBladeIncludeDescription": "Selezionare le piattaforme del dispositivo da includere in questi criteri",
- "deviceStateAll": "Tutti gli stati dei dispositivi",
- "deviceStateCompliant": "Dispositivo contrassegnato come conforme",
- "deviceStateCompliantInfoContent": "I dispositivi conformi con Intune verranno esclusi dalla valutazione di questi criteri, quindi se ad esempio i criteri bloccano l'accesso, verranno bloccati tutti i dispositivi tranne quelli conformi con Intune.",
- "deviceStateConditionConfigureInfoContent": "Configura i criteri in base allo stato del dispositivo",
- "deviceStateConditionSelectorInfoContent": "Indica se lo stato del dispositivo da cui l'utente esegue l'accesso è 'Aggiunto a Microsoft Entra ibrido' o 'contrassegnato come conforme'. \n Questo è stato deprecato. In alternativa, usare '{1}'.",
- "deviceStateConditionSelectorLabel": "Stato del dispositivo (deprecato)",
- "deviceStateDomainJoined": "Dispositivo aggiunto a Microsoft Entra ibrido",
- "deviceStateDomainJoinedInfoContent": "I dispositivi aggiunti a Microsoft Entra ibrido verranno esclusi dalla valutazione di questi criteri, quindi se ad esempio i criteri bloccano l'accesso, verranno bloccati tutti i dispositivi tranne quelli aggiunti a Microsoft Entra ibrido.",
- "deviceStateDomainJoinedInfoLinkText": "Altre informazioni.",
- "deviceStateExcludeDescription": "Selezionare la condizione dello stato del dispositivo usata per escludere i dispositivi dai criteri.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} ed escludi {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} ed escludi {1}, {2}",
- "directoryRoleInfoContent": "È possibile assegnare un criterio ai ruoli predefiniti della directory.",
- "directoryRolesLabel": "Ruoli della directory (anteprima)",
- "discardbutton": "Rimuovi",
- "downloadDefaultFileName": "Intervalli IP",
- "downloadExampleFileName": "Esempio",
- "downloadExampleHeader": "File di esempio con dimostrazioni delle tipologie di dati accettate. Le righe che iniziano con # verranno ignorate.",
- "duplicate": "Duplica",
- "duplicatePolicyName": "COPIA DI {0}",
- "endDatePickerLabel": "Estremità",
- "endTimePickerLabel": "Ora di fine",
- "enterCountryText": "L'indirizzo IP e il paese/area geografica vengono valutati in coppia. Selezionare il paese.",
- "enterIpText": "L'indirizzo IP e il paese/area geografica vengono valutati in coppia. Immettere l'indirizzo IP.",
- "enterUserText": "Nessun utente selezionato. Selezionare un utente.",
- "evaluationResult": "Risultato della valutazione",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync solo con piattaforme supportate",
- "excludeAllTrustedLocationSelectorText": "tutte le posizioni attendibili",
- "featureRequiresP2": "Questa funzionalità richiede la licenza Microsoft Entra ID P2.",
- "friday": "Venerdì",
- "grantControls": "Concedi controlli",
- "gridNetworkTrusted": "Attendibile",
- "gridPolicyCreatedDateTime": "Data di creazione",
- "gridPolicyEnabled": "Abilitato",
- "gridPolicyModifiedDateTime": "Data modifica",
- "gridPolicyName": "Nome criteri",
- "gridPolicyState": "Stato",
- "groupSelectionBladeExcludeDescription": "Selezionare i gruppi da escludere dai criteri",
- "groupSelectionBladeExcludedSelectorTitle": "Selezionare i gruppi esclusi",
- "groupSelectionBladeSelect": "Selezione gruppi",
- "groupSelectorInfoBallonText": "Gruppi nella directory a cui si applicano i criteri. Ad esempio: 'gruppo pilota'",
- "groupsSelectionBladeTitle": "Gruppi",
- "helpCommonScenariosText": "Informazioni sugli scenari comuni",
- "helpCondition1": "Quando un utente si trova all'esterno della rete aziendale",
- "helpCondition2": "Quando gli utenti nel gruppo 'Manager' eseguono l'accesso",
- "helpConditionsTitle": "Condizioni",
- "helpControl1": "Verrà richiesto di eseguire l'accesso con l’autenticazione a più fattori",
- "helpControl2": "Verrà richiesto di eseguire l'accesso tramite un dispositivo aggiunto a un dominio o compatibile con Intune",
- "helpControlsTitle": "Controlli",
- "helpIntroText": "L'accesso condizionale consente di imporre requisiti di accesso quando si verificano condizioni specifiche. Ecco alcuni esempi",
- "helpIntroTitle": "Informazioni sull'accesso condizionale",
- "helpLearnMoreText": "Per altre informazioni sull'accesso condizionale, vedere",
- "helpStartStep1": "Per creare il primo criterio, fare clic su \"+ Nuovo criterio\"",
- "helpStartStep2": "Specificare le Condizioni e i controlli del criterio",
- "helpStartStep3": "Al termine, fare clic su Attiva criterio e quindi su Crea",
- "helpStartTitle": "Attività iniziali",
- "highRisk": "Alta",
- "includeAndExcludeAppsTextFormat": "Includi: {0}. Escludi: {1}.",
- "includeAppsTextFormat": "Includi: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Le aree sconosciute sono indirizzi IP di cui non è possibile eseguire il mapping a un paese/area geografica.",
- "includeUnknownAreasCheckboxLabel": "Includi aree sconosciute",
- "infoCommandLabel": "Informazioni",
- "invalidCertDuration": "La durata del certificato non è valida",
- "invalidIpAddress": "Il valore deve essere un indirizzo IP valido",
- "invalidReAuthSignInRiskOptionSelected": "Il controllo della sessione \"Frequenza di accesso ogni volta\" non consente la selezione \"Nessun rischio\" nel controllo della condizione \"rischio di accesso\".",
- "invalidUriErrorMsg": "Immettere un URI valido. Ad esempio 'uri:contoso.com:acr' ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Carica tutti",
- "loading": "Caricamento...",
- "locationConfigureNamedLocationsText": "Configura tutte le posizioni attendibili",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Il nome della posizione è troppo lungo. Lunghezza massima: 256 caratteri",
- "locationSelectionBladeExcludeDescription": "Selezionare le posizioni da escludere dai criteri",
- "locationSelectionBladeIncludeDescription": "Selezionare le località da includere nei criteri",
- "locationsAllLocationsLabel": "Tutte le località",
- "locationsAllNamedLocationsLabel": "Tutti gli indirizzi IP attendibili",
- "locationsAllPrivateLinksLabel": "Tutti i collegamenti privati nel tenant",
- "locationsIncludeExcludeLabel": "{0} ed escludi tutti gli IP attendibili",
- "locationsSelectedPrivateLinksLabel": "Collegamenti privati selezionati",
- "lowRisk": "Bassa",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "Per gestire i criteri di accesso condizionale, l'organizzazione necessita di Microsoft Entra ID P1 o P2.",
- "manageSecurityDefaultsAriaLabel": "Gestire le impostazioni predefinite per la sicurezza.",
- "markAsTrustedCheckboxInfoBalloonContent": "L'accesso da una posizione attendibile riduce il rischio di accesso dell'utente. Contrassegnare questa posizione come attendibile solo se si è certi che gli intervalli IP immessi siano stabiliti e credibili nell'organizzazione.",
- "markAsTrustedCheckboxLabel": "Contrassegna come posizione attendibile",
- "mediumRisk": "Medio",
- "memberSelectionCommandRemove": "Rimuovi",
- "menuItemClaimProviderControls": "Controlli personalizzati (anteprima)",
- "menuItemClassicPolicies": "Criteri classici",
- "menuItemInsightsAndReporting": "Informazioni dettagliate e report",
- "menuItemManage": "Gestione",
- "menuItemNamedLocationsPreview": "Località denominate (anteprima)",
- "menuItemNamedNetworks": "Località denominate",
- "menuItemPolicies": "Criteri",
- "menuItemTermsOfUse": "Condizioni per l'utilizzo",
- "modifiedTimeLabel": "Ora di modifica",
- "monday": "Lunedì",
- "nameLabel": "Nome",
- "namedLocationCountryInfoBanner": "Solo gli indirizzi IPv4 vengono mappati ai paesi o alle aree geografiche. Gli indirizzi IPv6 sono inclusi in aree geografiche/paesi sconosciuti.",
- "namedLocationTypeCountry": "Paesi/aree geografiche",
- "namedLocationTypeLabel": "Definisci il tipo di posizione in base a:",
- "namedLocationUpsellBanner": "Questa visualizzazione è stata deprecata. Passare alla visualizzazione nuova e migliorata 'Località denominate'.",
- "namedLocationsHelpDescription": "Le località denominate vengono usate dai report sulla sicurezza di Microsoft Entra ID per ridurre i falsi positivi e dai criteri di accesso condizionale di Microsoft Entra.\n[Altre informazioni][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Aggiungi un nuovo intervallo IP. Ad esempio: 40.77.182.32/27",
- "namedNetworkCountryNeeded": "È necessario selezionare almeno un paese/area geografica",
- "namedNetworkDeleteCommand": "Elimina",
- "namedNetworkDeleteDescription": "Eliminare '{0}'? Questa azione non può essere annullata.",
- "namedNetworkDeleteTitle": "Continuare?",
- "namedNetworkDownloadIpRange": "Scarica",
- "namedNetworkInvalidRange": "Il valore deve essere un intervallo IP valido.",
- "namedNetworkIpRangeNeeded": "È necessario specificare almeno un intervallo IP valido",
- "namedNetworkIpRangesDescriptionContent": "Configurare gli intervalli IP dell'organizzazione",
- "namedNetworkIpRangesTab": "Intervalli IP",
- "namedNetworkListAdd": "Nuovo percorso",
- "namedNetworkListConfigureTrustedIps": "Configurare indirizzi IP attendibili per l'autenticazione a più fattori",
- "namedNetworkNameDescription": "Ad esempio: 'Ufficio di Redmond'",
- "namedNetworkNameInvalid": "Il nome specificato non è valido.",
- "namedNetworkNameRequired": "È necessario specificare un nome per questo percorso.",
- "namedNetworkNoIpRanges": "Nessun intervallo IP",
- "namedNetworkNotificationCreateDescription": "Creazione del percorso denominato '{0}'",
- "namedNetworkNotificationCreateFailedDescription": "La creazione del percorso '{0}' non è riuscita. Riprovare più tardi.",
- "namedNetworkNotificationCreateFailedTitle": "Non è stato possibile creare il percorso",
- "namedNetworkNotificationCreateSuccessDescription": "Il percorso denominato '{0}' è stata creata",
- "namedNetworkNotificationCreateSuccessTitle": "La rete '{0}' è stata creata",
- "namedNetworkNotificationCreateTitle": "Creazione della rete '{0}'",
- "namedNetworkNotificationDeleteDescription": "Eliminazione del percorso denominato '{0}'",
- "namedNetworkNotificationDeleteFailedDescription": "L'eliminazione del percorso '{0}' non è riuscita. Riprovare più tardi.",
- "namedNetworkNotificationDeleteFailedTitle": "Non è stato possibile eliminare il percorso",
- "namedNetworkNotificationDeleteSuccessDescription": "Il percorso denominato '{0}' è stato eliminato",
- "namedNetworkNotificationDeleteSuccessTitle": "La rete '{0}' è stata eliminata",
- "namedNetworkNotificationDeleteTitle": "Eliminazione di '{0}'",
- "namedNetworkNotificationUpdateDescription": "Aggiornamento del percorso denominato '{0}'",
- "namedNetworkNotificationUpdateFailedDescription": "L'aggiornamento del percorso '{0}' non è riuscito. Riprovare più tardi.",
- "namedNetworkNotificationUpdateFailedTitle": "Non è stato possibile aggiornare il percorso",
- "namedNetworkNotificationUpdateSuccessDescription": "Il percorso denominato '{0}' è stato aggiornato",
- "namedNetworkNotificationUpdateSuccessTitle": "La rete '{0}' è stata aggiornata",
- "namedNetworkNotificationUpdateTitle": "Aggiornamento della rete '{0}'",
- "namedNetworkSearchPlaceholder": "Cerca i percorsi.",
- "namedNetworkUploadFailedDescription": "Si è verificato un errore durante l'analisi del file fornito. Assicurarsi di caricare un file di testo normale con ogni riga nel formato CIDR.",
- "namedNetworkUploadFailedTitle": "Non è stato possibile analizzare '{0}'",
- "namedNetworkUploadInProgressDescription": "È in corso un tentativo per analizzare i valori CIDR validi da '{0}'.",
- "namedNetworkUploadInProgressTitle": "Analisi di '{0}'",
- "namedNetworkUploadInvalidDescription": "'{0}' è troppo grande o presenta un formato non valido.",
- "namedNetworkUploadInvalidTitle": "'{0}' non è valido",
- "namedNetworkUploadIpRange": "Carica",
- "namedNetworkUploadSuccessDescription": "{0} righe analizzate. {1} righe in un formato non valido. {2} righe ignorate.",
- "namedNetworkUploadSuccessTitle": "L'analisi di '{0}' è stata completata",
- "namedNetworksAdd": "Nuova località denominata",
- "namedNetworksConditionHelpDescription": "È possibile controllare l'accesso degli utenti in base alla posizione fisica.\n[Altre informazioni][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} e {1} escluse",
- "namedNetworksHelpDescription": "Le località denominate vengono usate dai report sulla sicurezza di Microsoft Entra ID per ridurre i falsi positivi e dai criteri di accesso condizionale di Microsoft Entra.\n[Altre informazioni][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} inclusi",
- "namedNetworksNone": "Non sono state trovate località denominate.",
- "namedNetworksTitle": "Configura posizioni",
- "namednetworkExceedingSizeErrorBladeTitle": "Dettagli errore",
- "namednetworkExceedingSizeErrorDetailText": "Fare clic qui per altri dettagli.",
- "namednetworkExceedingSizeErrorMessage": "È stato superato lo spazio di archiviazione massimo consentito per le località denominate. Riprovare con un elenco più breve. Fare clic qui per visualizzare altri dettagli.",
- "needMfaSecondary": "È necessario selezionare \"Richiedi l'autenticazione a più fattori\" quando si seleziona \"Frequenza di accesso ogni volta\" con \"Solo metodi di autenticazione secondari\"",
- "needMfaSpecificApps": "\"Il controllo sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Richiedi autenticazione a più fattori\" quando sono selezionate app supportate in modo specifico",
- "newCertName": "nuovo certificato",
- "noAttributePermissionsError": "Privilegi insufficienti per la creazione o l'aggiornamento dei criteri. Per aggiungere/modificare i filtri dinamici, è necessario il ruolo con autorizzazione di lettura degli attributi.",
- "noPolicyRowMessage": "Nessun criterio",
- "noSPSelected": "Nessuna entità servizio selezionata",
- "noUpdatePermissionMessage": "Non si è autorizzati ad aggiornare queste impostazioni. Per ottenere l'accesso, contattare l'amministratore globale.",
- "noUserSelected": "Nessun utente selezionato",
- "noneRisk": "Nessun rischio",
- "office365Description": "Queste app includono Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer e altre ancora.",
- "office365InfoBox": "Almeno una delle app selezionate fa parte di Office 365. È consigliabile impostare il criterio sull'app di Office 365.",
- "oneUserSelected": "1 utente selezionato",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Solo gli amministratori globali possono salvare questi criteri.",
- "or": "{0} OR {1} ",
- "pickerDoneCommand": "Fatto",
- "policiesBladeAdPremiumUpsellBannerText": "È possibile creare criteri personalizzati per soddisfare condizioni specifiche, ad esempio app cloud, rischio di accesso e piattaforme di dispositivi con Microsoft Entra ID Premium.",
- "policiesBladeTitle": "Criteri",
- "policiesBladeTitleWithAppName": "Criteri: {0}",
- "policiesDisabledBannerText": "Non è consentito creare e modificare criteri per applicazioni con un attributo di accesso collegato.",
- "policiesHitMaxLimitStatusBarMessage": "È stato raggiunto il numero massimo di criteri per questo tenant. Eliminare alcuni criteri prima di crearne altri.",
- "policyAssignmentsSection": "Assegnazioni",
- "policyBlockAllInfoBox": "Il criterio configurato bloccherà tutti gli utenti, quindi non è supportato. Verificare le assegnazioni e i controlli. Escludere l'utente corrente {0}, se si desidera salvare questo criterio.",
- "policyCloudAppsDisplayTextAllApp": "Tutte le app",
- "policyCloudAppsLabel": "App cloud",
- "policyConditionClientAppDescription": "Software che l'utente usa per accedere all'app cloud. Ad esempio, 'Browser'",
- "policyConditionClientAppV2Description": "Software che l'utente usa per accedere all'app cloud. Ad esempio, 'Browser'",
- "policyConditionDevicePlatform": "Piattaforme del dispositivo",
- "policyConditionDevicePlatformDescription": "Piattaforma da cui accede l'utente. Ad esempio, 'iOS'",
- "policyConditionLocation": "Località",
- "policyConditionLocationDescription": "Posizione (determinata tramite l'intervallo di indirizzi IP) da cui accede l'utente",
- "policyConditionLocationPreview": "Località (anteprima)",
- "policyConditionSigninRisk": "Rischio di accesso",
- "policyConditionSigninRiskDescription": "Probabilità che l'accesso provenga da una persona diversa dall'utente. Il livello di rischio può essere alto, medio o basso. Richiede una licenza di Microsoft Entra ID P2.",
- "policyConditionUserRisk": "Rischio utente",
- "policyConditionUserRiskDescription": "Consente di configurare i livelli di rischio utente necessari per l'applicazione dei criteri",
- "policyConditioniClientApp": "App client",
- "policyControlAllowAccessDisplayedName": "Concedi accesso",
- "policyControlAuthenticationStrengthDisplayedName": "Richiedi livello di autenticazione (anteprima)",
- "policyControlBladeTitle": "Concedi",
- "policyControlBlockAccessDisplayedName": "Blocca accesso",
- "policyControlCompliantDeviceDisplayedName": "Richiedi che i dispositivi siano contrassegnati come conformi",
- "policyControlContentDescription": "Controllare l'imposizione dell'accesso per bloccare o concedere l'accesso.",
- "policyControlInfoBallonText": "Permette di bloccare l'accesso o di selezionare requisiti aggiuntivi che devono essere soddisfatti per consentire l'accesso",
- "policyControlMfaChallengeDisplayedName": "Richiedere l'autenticazione a più fattori",
- "policyControlRequireCompliantAppDisplayedName": "Richiedi criteri di protezione dell'app",
- "policyControlRequireDomainJoinedDisplayedName": "Richiedi dispositivo aggiunto a Microsoft Entra ibrido",
- "policyControlRequireMamDisplayedName": "Richiedi app client approvata",
- "policyControlRequiredPasswordChangeDisplayedName": "Richiedi modifica password",
- "policyControlSelectAuthStrength": "Richiedi complessità dell'autenticazione",
- "policyControlsNoControlsSelected": "0 controlli selezionati",
- "policyControlsSection": "Controlli di accesso",
- "policyCreatBladeTitle": "Nuova",
- "policyCreateButton": "Crea",
- "policyCreateFailedMessage": "Errore: {0}",
- "policyCreateFailedTitle": "Non è stato possibile creare '{0}'",
- "policyCreateInProgressTitle": "Creazione della rete '{0}'",
- "policyCreateSuccessMessage": "La creazione di '{0}' è riuscita. I criteri saranno abilitati entro pochi minuti se l'opzione \"Abilita criteri\" è impostata su \"Sì\".",
- "policyCreateSuccessTitle": "La creazione di '{0}' è riuscita",
- "policyDeleteConfirmation": "Eliminare '{0}'? Questa azione non può essere annullata.",
- "policyDeleteFailTitle": "Non è stato possibile eliminare '{0}'",
- "policyDeleteInProgressTitle": "Eliminazione di '{0}'",
- "policyDeleteSuccessTitle": "L'eliminazione di '{0}' è riuscita",
- "policyEnforceLabel": "Abilita criterio",
- "policyErrorCannotSetSigninRisk": "Non si è autorizzati a salvare criteri con una condizione di rischio di accesso.",
- "policyErrorNoPermission": "Non si è autorizzati a salvare i criteri. Contattare l'amministratore globale.",
- "policyErrorUnknown": "Si è verificato un errore. Riprovare più tardi.",
- "policyFallbackWarningMessage": "Errore durante la creazione o l'aggiornamento di '{0}' usando MS Graph con conseguente fallback in Ad Graph. Esaminare lo scenario seguente perché è molto probabile che si presenti un bug quando si chiama l'endpoint dei criteri per MS Graph con una condizione non compatibile.",
- "policyFallbackWarningTitle": "Creazione o aggiornamento di '{0}' eseguito parzialmente",
- "policyNameCannotBeEmpty": "Il nome dei criteri non può essere vuoto",
- "policyNameDevice": "Criteri del dispositivo",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Criteri di Gestione delle app per dispositivi mobili",
- "policyNameMfaLocation": "Autenticazione a più fattori e criteri di posizione",
- "policyNamePlaceholderText": "Ad esempio: 'Criteri app conformità dispositivo'",
- "policyNameTooLongError": "Il nome dei criteri è troppo lungo. La lunghezza massima è 256 caratteri",
- "policyOff": "Disattivato",
- "policyOn": "Attivato",
- "policyReportOnly": "Solo report",
- "policyReviewSection": "Visualizza",
- "policySaveButton": "Salva",
- "policyStatusIconDescription": "Criteri abilitati",
- "policyStatusIconEnabled": "Icona stato abilitato",
- "policyTemplateName1": "Usa restrizioni imposte dall'app per l'accesso a {0} tramite il browser",
- "policyTemplateName2": "Consenti l'accesso a {0} solo su dispositivi gestiti",
- "policyTemplateName3": "Criterio sottoposto a migrazione dalle impostazioni di Valutazione continua dell'accesso",
- "policyTriggerRiskSpecific": "Selezionare il livello di rischio specifico",
- "policyTriggersInfoBalloonText": "Condizioni che definiscono la condizione in base a cui si applicano i criteri. Ad esempio, 'posizione'",
- "policyTriggersNoConditionsSelected": "0 condizioni selezionate",
- "policyTriggersSelectorLabel": "Condizioni",
- "policyUpdateFailedMessage": "Errore: {0}",
- "policyUpdateFailedTitle": "Non è stato possibile aggiornare {0}",
- "policyUpdateInProgressTitle": "Aggiornamento di {0}",
- "policyUpdateSuccessMessage": "L'aggiornamento di {0} è riuscito. I criteri saranno abilitati entro pochi minuti se l'opzione \"Abilita criteri\" è impostata su \"Sì\".",
- "policyUpdateSuccessTitle": "L'aggiornamento di {0} è stato completato",
- "primaryCol": "Primario",
- "privateLinkLabel": "Collegamento privato a Microsoft Entra ID",
- "reportOnlyInfoBox": "Modalità Solo report: i criteri vengono valutati e registrati all'accesso ma non influiscono sugli utenti.",
- "requireAllControlsText": "Richiedi tutti i controlli selezionati",
- "requireCompliantDevice": "Richiedi un dispositivo conforme",
- "requireDomainJoined": "Richiedi dispositivo aggiunto a un dominio",
- "requireGrantReauth": "Il controllo sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Richiedi l'autenticazione a più fattori\" o \"Richiedi la modifica della password\" quando è selezionato \"Tutte le app cloud\"",
- "requireMFA": "Richiedere l'autenticazione a più fattori",
- "requireMfaReauth": "Il controllo sessione di \"Frequenza di accesso ogni volta richiede la concessione del controllo \"Richiedi l'autenticazione a più fattori\" per \"Rischio di accesso\"",
- "requireOneControlText": "Richiedi uno dei controlli selezionati",
- "requirePasswordChangeReauth": "Il controllo sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Richiedi la modifica della password\" per \"Rischio di accesso\"",
- "requireRiskReauth": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Rischio utente\" o \"Rischio di accesso\" quando è selezionato \"Tutte le app cloud\".",
- "requireRiskReauthRiskNotEnabled": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" non è disponibile quando è selezionato \"Tutte le app cloud\".",
- "requireRiskReauthSignInOnly": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Rischio di accesso\" quando è selezionato \"Tutte le app cloud\".",
- "requireRiskReauthUserOnly": "Il controllo della sessione di \"Frequenza di accesso ogni volta\" richiede la concessione del controllo \"Rischio utente\" quando è selezionato \"Tutte le app cloud\".",
- "resetFilters": "Reimposta filtri",
- "sPRequired": "Entità servizio obbligatoria",
- "sPSelectorInfoBalloon": "Utente o entità servizio da testare",
- "saturday": "Sabato",
- "searchTextTooLongError": "Il testo di ricerca è troppo lungo. Al massimo 256 caratteri",
- "securityDefaultsPolicyName": "Impostazioni predefinite per la sicurezza",
- "securityDefaultsTextMessage": "Le impostazioni predefinite per la sicurezza devono essere disabilitate per abilitare i criteri di accesso condizionale.",
- "securityDefaultsUpdateInProgressText": "È in corso un aggiornamento delle impostazioni predefinite di sicurezza. Attendere qualche istante e riprovare.",
- "securityDefaultsWarningMessage": "Si stanno per gestire le configurazioni di sicurezza dell'organizzazione. È prima di tutto necessario {0}disabilitare le impostazioni predefinite per la sicurezza{1} prima di abilitare i criteri di accesso condizionale.",
- "selectDevicePlatforms": "Seleziona piattaforme del dispositivo",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Seleziona percorsi",
- "selectedSP": "Entità servizio selezionata",
- "servicePrincipalBladeExcludedSelectorTitle": "Selezionare le entità servizio escluse",
- "servicePrincipalBladeIncludedSelectorTitle": "Selezionare entità servizio",
- "servicePrincipalDataGridAria": "Elenco delle entità servizio disponibili",
- "servicePrincipalDropDownLabel": "A cosa si applica questo criterio?",
- "servicePrincipalInfoBox": "Alcune condizioni non sono disponibili a causa della selezione di '{0}' nell'assegnazione dei criteri",
- "servicePrincipalRadioAll": "Tutte le entità servizio possedute",
- "servicePrincipalRadioSelect": "Seleziona entità servizio",
- "servicePrincipalSelectionsAria": "Griglia delle entità servizio selezionate",
- "servicePrincipalSelectorAria": "Elenco delle entità servizio selezionate",
- "servicePrincipalSelectorMultiple": "{0} entità servizio selezionate",
- "servicePrincipalSelectorSingle": "1 entità servizio selezionata",
- "servicePrincipalSpecificExc": "Entità servizio specifiche escluse",
- "servicePrincipalSpecificInc": "Entità servizio specifiche incluse",
- "servicePrincipals": "Entità servizio",
- "sessionControlBladeTitle": "Sessione",
- "sessionControlDescriptionContent": "È possibile controllare l'accesso in base ai controlli della sessione per abilitare esperienze limitate entro applicazioni cloud specifiche.",
- "sessionControlDisableInfo": "Questo controllo funziona solo con le app supportate. Attualmente Office 365, Exchange Online e SharePoint Online sono le uniche app cloud che supportano le restrizioni imposte dalle app. Fare clic qui per altre informazioni.",
- "sessionControlInfoBallonText": "I controlli della sessione abilitano un'esperienza limitata in un'app cloud.",
- "sessionControls": "Controlli della sessione",
- "sessionControlsAppEnforcedLabel": "Usa restrizioni imposte dalle app",
- "sessionControlsCasLabel": "Usa Controllo app per l'accesso condizionale",
- "sessionControlsSecureSignInLabel": "Richiedi binding del token",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} inclusi",
- "signinRiskReauth": "È necessario selezionare la condizione \"Rischio di accesso\" quando sono selezionati la concessione \"Richiedi l'autenticazione a più fattori\" e il controllo della sessione \"Frequenza di accesso ogni volta\"",
- "signinRiskTriggerDescriptionContent": "Selezionare il livello di rischio di accesso",
- "singleTenantServicePrincipalInfoBallonText": "Il criterio si applica solo alle singole entità servizio tenant di proprietà dell'organizzazione. Fare clic qui per altre informazioni ",
- "specificSigninRiskLevelsOption": "Selezionare i livelli di rischio di accesso specifici",
- "specificUsersExcluded": "utenti specifici esclusi",
- "specificUsersIncluded": "Utenti specifici inclusi",
- "specificUsersIncludedAndExcluded": "Utenti specifici esclusi e inclusi",
- "startDatePickerLabel": "Inizia",
- "startFreeTrial": "Avviare una versione di valutazione gratuita",
- "startTimePickerLabel": "Ora di inizio",
- "sunday": "Domenica",
- "testButton": "What If",
- "thumbprintCol": "Identificazione personale",
- "thursday": "Giovedì",
- "timeConditionAllTimesLabel": "In qualsiasi momento",
- "timeConditionIntroText": "Configurare gli orari a cui verranno applicati i criteri",
- "timeConditionSelectorInfoBallonContent": "Momento in cui l'utente esegue l'accesso. Ad esempio: \"Mercoledì 9:00 - 17:00 PST\"",
- "timeConditionSelectorLabel": "Ora (anteprima)",
- "timeConditionSpecificLabel": "Orari specifici",
- "timeSelectorAllTimesText": "In qualsiasi momento",
- "timeSelectorSpecificTimesText": "Orari specifici configurati",
- "timeZoneDropdownInfoBalloonContent": "Selezionare un fuso orario che definisca l'intervallo di tempo. Questi criteri si applicano agli utenti in tutti i fusi orari. Ad esempio, 'Mercoledì 9:00 - 17:00' per un utente potrebbe essere 'Mercoledì 10:00 - 18:00' per un altro utente in un fuso orario diverso.",
- "timeZoneDropdownLabel": "Fuso orario",
- "timeZoneDropdownPlaceholderText": "Selezionare un fuso orario",
- "tooManyPoliciesDescription": "Sono attualmente visualizzati solo i primi 50 criteri. Fare clic qui per visualizzarli tutti",
- "tooManyPoliciesTitle": "Più di 50 criteri trovati",
- "trustedLocationStatusIconDescription": "La posizione è considerata attendibile",
- "trustedLocationStatusIconEnabled": "Icona dello stato attendibile",
- "tuesday": "Martedì",
- "uploadInBadState": "Non è possibile caricare il file specificato.",
- "upsellAppsDescription": "È possibile richiedere l'autenticazione a più fattori per le applicazioni sensibili sempre oppure solo dall'esterno della rete aziendale.",
- "upsellAppsTitle": "Proteggere le applicazioni",
- "upsellBannerText": "Per accedere a questa funzionalità, usare una versione di valutazione gratuita Premium",
- "upsellDataDescription": "È possibile richiedere che i dispositivi siano contrassegnati come conformi o aggiunti a Microsoft Entra ibrido per consentire l'accesso alle risorse aziendali.",
- "upsellDataTitle": "Proteggere i dati",
- "upsellDescription": "L'accesso condizionale garantisce il controllo e la protezione necessari per proteggere i dati aziendali, offrendo al contempo ai dipendenti un'esperienza che permette loro di svolgere il proprio lavoro al meglio e da qualsiasi dispositivo. Ad esempio, è possibile bloccare l'accesso dall'esterno della rete aziendale oppure bloccare l'accesso ai dispositivi che non soddisfano i requisiti di conformità.",
- "upsellRiskDescription": "È possibile richiedere l’autenticazione a più fattori per gli eventi di rischio rilevati dal sistema di Machine Learning di Microsoft.",
- "upsellRiskTitle": "Proteggersi dai rischi",
- "upsellTitle": "Accesso condizionale",
- "upsellWhyTitle": "Vantaggi dell'accesso condizionale",
- "userAppNoneOption": "Nessuno",
- "userNamePlaceholderText": "Immetti nome utente",
- "userNotSetSeletorLabel": "0 utenti e gruppi selezionati",
- "userOnlySelectionBladeExcludeDescription": "Selezionare i gruppi da escludere dai criteri",
- "userOrGroupSelectionCountDiffBannerText": "{0} configurati in questo criterio sono stati eliminati dalla directory, ma questa operazione non influisce sugli altri utenti e gruppi nel criterio. Al successivo aggiornamento del criterio gli utenti e/o i gruppi eliminati verranno rimossi automaticamente.",
- "userOrSPNotSetSelectorLabel": "0 utenti o identità dei carichi di lavoro selezionati",
- "userOrSPSelectionBladeTitle": "Utenti o identità dei carichi di lavoro",
- "userOrSPSelectorInfoBallonText": "Identità nella directory a cui si applicano i criteri, inclusi utenti, gruppi ed entità servizio",
- "userRequired": "L'utente è obbligatorio",
- "userRiskErrorBox": "È necessario selezionare la condizione \"Rischio utente\" quando è selezionata la concessione \"Richiedi modifica password\"",
- "userRiskReauth": "Deve essere selezionata la condizione \"Rischio utente\" e non \"Rischio di accesso\" quando sono selezionati la concessione \"Richiedi modifica della password\" e il controllo della sessione \"Frequenza di accesso ogni volta\"",
- "userSPRequired": "Utente o entità servizio obbligatori",
- "userSPSelectorTitle": "Utente o identità del carico di lavoro",
- "userSelectionBladeAllUsersAndGroups": "Tutti gli utenti e i gruppi",
- "userSelectionBladeExcludeDescription": "Selezionare gli utenti e i gruppi da escludere dai criteri",
- "userSelectionBladeExcludeTabTitle": "Escludi",
- "userSelectionBladeExcludedSelectorTitle": "Selezionare gli utenti e i gruppi esclusi",
- "userSelectionBladeIncludeDescription": "Selezionare gli utenti a qui verranno applicati i criteri",
- "userSelectionBladeIncludeTabTitle": "Includi",
- "userSelectionBladeIncludedSelectorTitle": "Seleziona",
- "userSelectionBladeSelectUsers": "Seleziona utenti",
- "userSelectionBladeSelectedUsers": "Seleziona utenti e gruppi",
- "userSelectionBladeTitle": "Utenti e gruppi",
- "userSelectorBladeTitle": "Utenti",
- "userSelectorExcluded": "{0} esclusi",
- "userSelectorGroupPlural": "{0} gruppi",
- "userSelectorGroupSingular": "1 gruppo",
- "userSelectorIncluded": "{0} inclusi",
- "userSelectorInfoBallonText": "Utenti e gruppi nella directory a cui si applicano i criteri. Ad esempio, 'Gruppo pilota'",
- "userSelectorSelected": "{0} selezionati",
- "userSelectorTitle": "Utente",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} utenti",
- "userSelectorUserSingular": "1 utente",
- "userSelectorWithExclusion": "{0} e {1}",
- "usersGroupsLabel": "Utenti e gruppi",
- "viewApprovedAppsText": "Visualizza l'elenco di app client approvate",
- "viewCompliantAppsText": "Visualizza l'elenco di app client protette da criteri",
- "viewPolicyInformation": "Visualizza informazioni sui criteri",
- "vpnBladeTitle": "Connettività VPN",
- "vpnCertCreateFailedMessage": "Errore: {0}",
- "vpnCertCreateFailedTitle": "Impossibile creare {0}",
- "vpnCertCreateInProgressTitle": "Creazione del tipo di risorsa {0}",
- "vpnCertCreateSuccessMessage": "La creazione di {0} è riuscita.",
- "vpnCertCreateSuccessTitle": "La creazione di {0} è riuscita",
- "vpnCertNoRowsMessage": "Non sono stati trovati certificati VPN",
- "vpnCertUpdateFailedMessage": "Errore: {0}",
- "vpnCertUpdateFailedTitle": "Non è stato possibile aggiornare {0}",
- "vpnCertUpdateInProgressTitle": "Aggiornamento di {0}",
- "vpnCertUpdateSuccessMessage": "L'aggiornamento di {0} è stato completato.",
- "vpnCertUpdateSuccessTitle": "L'aggiornamento di {0} è stato completato",
- "vpnFeatureInfo": "Per altre informazioni sulla connettività VPN e l'accesso condizionale, fare clic qui.",
- "vpnFeatureWarning": "Dopo la creazione di un certificato VPN nel portale, Microsoft Entra ID inizierà a usarlo immediatamente per rilasciare certificati di breve durata per il client VPN. È essenziale che il certificato VPN venga distribuito immediatamente nel server VPN per evitare problemi relativi alla convalida delle credenziali del client VPN.",
- "vpnMenuText": "Connettività VPN",
- "vpncertDropdownDefaultOption": "Durata",
- "vpncertDropdownInfoBalloonContent": "Selezionare la durata per il certificato da creare",
- "vpncertDropdownLabel": "Seleziona durata",
- "vpncertDropdownOneyearOption": "1 anno",
- "vpncertDropdownThreeyearOption": "3 anni",
- "vpncertDropdownTwoyearOption": "2 anni",
- "wednesday": "Mercoledì",
- "whatIfCountry": "Paese/area geografica",
- "whatIfCountryInfo": "Paese/area geografica da cui l'utente esegue l'accesso.",
- "whatIfDevicePlatformInfo": "Piattaforma del dispositivo da cui l'utente esegue l'accesso.",
- "whatIfEnterIpAddress": "Immettere l'indirizzo IP (ad esempio: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "Specificato un indirizzo IP non valido.",
- "whatIfIpAddress": "Indirizzo IP",
- "whatIfIpAddressInfo": "Indirizzo IP da cui l'utente esegue l'accesso.",
- "whatIfIpCountryInfoBoxText": "Se si usa un indirizzo IP o un paese/area geografica, entrambi i campi sono obbligatori e devono essere associati correttamente.",
- "whatIfSelectCountry": "Selezionare un paese/area geografica...",
- "whatIfSelectDevicePlatform": "Seleziona piattaforma dispositivo...",
- "whatIfSelectPrivateLink": "Selezionare collegamento privato...",
- "whatIfSelectSignInRisk": "Seleziona rischio di accesso...",
- "whatIfSignInRisk": "Rischio di accesso",
- "whatIfSignInRiskInfo": "Livello di rischio associato all'accesso",
- "whatIfUnknownAreas": "Aree sconosciute",
- "windows365InfoBox": "La selezione di Windows 365 influirà sulle connessioni ai Cloud PC e agli host di sessione di Desktop virtuale Azure. Fare clic qui per altre informazioni.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Identità dei carichi di lavoro (anteprima)",
- "workloadIdentitiesLicenseText": "Per modificare questo criterio, è necessaria una licenza Premium P1 o P2 delle identità del carico di lavoro.",
- "workloadIdentity": "Identità del carico di lavoro"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Non supportato",
- "supportEnding": "Fine supporto",
- "supported": "Supportato"
- }
- },
- "SecurityTemplate": {
- "aSR": "Riduzione della superficie di attacco",
- "accountProtection": "Protezione account",
- "allDevices": "Tutti i dispositivi",
- "antivirus": "Antivirus",
- "antivirusReporting": "Report dell'antivirus (anteprima)",
- "conditionalAccess": "Accesso condizionale",
- "deviceCompliance": "Conformità del dispositivo",
- "diskEncryption": "Crittografia del disco",
- "eDR": "Rilevamento di endpoint e risposta",
- "ePM": "Gestione dei privilegi endpoint",
- "firewall": "Firewall",
- "helpSupport": "Guida e supporto tecnico",
- "setup": "Installazione",
- "wdapt": "Microsoft Defender per endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Errore",
- "hardReboot": "Avvio a freddo",
- "retry": "Riprova",
- "softReboot": "Avvio a caldo",
- "success": "Operazione completata"
- },
- "Columns": {
- "codeType": "Tipo di codice",
- "returnCode": "Codice restituito"
- },
- "bladeTitle": "Codici restituiti",
- "gridAriaLabel": "Codici restituiti",
- "header": "Specificare i codici restituiti per indicare il comportamento successivo all'installazione:",
- "onAddAnnounceMessage": "Codice restituito all'aggiunta dell'elemento {0} di {1}",
- "onDeleteSuccess": "Il codice restituito {0} è stato eliminato",
- "returnCodeAlreadyUsedValidation": "Il codice restituito è già in uso.",
- "returnCodeMustBeIntegerValidation": "Il codice restituito deve essere un numero intero.",
- "returnCodeShouldBeAtLeast": "Il codice restituito deve essere almeno {0}.",
- "returnCodeShouldBeAtMost": "Il codice restituito deve essere al massimo {0}.",
- "selectorLabel": "Codici restituiti"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabo",
- "bulgarian": "Bulgaro",
- "chineseSimplified": "Cinese (semplificato)",
- "chineseTraditional": "Cinese (tradizionale)",
- "croatian": "Croato",
- "czech": "Ceco",
- "danish": "Danese",
- "dutch": "Olandese",
- "englishUK": "Inglese (Regno Unito)",
- "englishUS": "Inglese (Stati Uniti)",
- "estonian": "Estone",
- "finnish": "Finlandese",
- "frenchCanada": "Francese (Canada)",
- "frenchFrance": "Francese (Francia)",
- "german": "Tedesco",
- "greek": "Greco",
- "hebrew": "Ebraico",
- "hungarian": "Ungherese",
- "italian": "Italiano",
- "japanese": "Giapponese",
- "korean": "Coreano",
- "latvian": "Lettone",
- "lithuanian": "Lituano",
- "norwegian": "Norvegese (Bokmål)",
- "polish": "Polacco",
- "portugueseBrazil": "Portoghese (Brasile)",
- "portuguesePortugal": "Portoghese (Portogallo)",
- "romanian": "Rumeno",
- "russian": "Russo",
- "serbian": "Serbo",
- "slovak": "Slovacco",
- "slovenian": "Sloveno",
- "spanishMexico": "Spagnolo (Messico)",
- "spanishSpain": "Spagnolo (Spagna)",
- "swedish": "Svedese",
- "thai": "Thai",
- "turkish": "Turco",
- "ukrainian": "Ucraino"
- },
- "Summary": {
- "placeholder": "Selezionare un messaggio di notifica a sinistra per visualizzare in anteprima i contenuti."
- },
- "companyContact": "Mostra informazioni di contatto",
- "companyLogo": "Mostra il logo della società",
- "companyName": "Mostra il nome della società",
- "createEditDescription": "Creare o modificare i modelli di messaggio di notifica.",
- "createMessage": "Crea il messaggio",
- "deviceDetails": "Mostra dettagli del dispositivo",
- "deviceDetailsInfoBox": "Questa impostazione è disattivata per impostazione predefinita perché il recupero dei dettagli del dispositivo può causare un ritardo nella ricezione delle notifiche tramite posta elettronica.",
- "editImpactInfo": "La modifica del modello del messaggio di notifica interesserà tutti i criteri che usano questo modello.",
- "editMessage": "Modifica il messaggio",
- "email": "posta elettronica",
- "emailFooterTitle": "Piè di pagina del messaggio di posta elettronica",
- "emailHeaderFooterInfo": "Le impostazioni per intestazione e piè di pagina di posta elettronica per le notifiche tramite posta elettronica si basano sulle impostazioni di personalizzazione nel nodo di amministrazione del tenant in Endpoint Manager.",
- "emailHeaderTitle": "Intestazione di messaggio di posta elettronica",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Configurare le impostazioni di personalizzazione",
- "formSubTitle": "Crea o modifica i messaggi di posta elettronica di notifica",
- "headerFooterSettingsTab": "Impostazioni intestazione e piè di pagina",
- "imgPreview": "Anteprima immagine",
- "infotext": "Selezionare un messaggio di notifica. Per creare una nuova notifica, vedere Notifica nella sezione Gestisci nel carico di lavoro Imposta la conformità dei dispositivi.",
- "iwLink": "Mostra il collegamento al sito Web del Portale aziendale",
- "listEmpty": "Non sono presenti modelli di messaggio.",
- "listEmptySelectOnly": "Non sono presenti modelli di messaggio. Per creare una nuova notifica, vedere Notifiche nella sezione Gestisci nel carico di lavoro Imposta la conformità dei dispositivi.",
- "listSubTitle": "Elenco di modelli di messaggi di notifica",
- "listTitle": "Modelli del messaggio di notifica",
- "localizedNotificationMessageTemplates": "Modelli di messaggi di notifica localizzati",
- "messageAssigned": "Non è possibile eliminare questo modello di messaggio perché è attualmente usato da uno o più criteri di conformità.",
- "messageCapitalized": "Modello del messaggio di notifica",
- "messageLowercase": "modello del messaggio di notifica",
- "missingDefaultError": "Selezionare un modello predefinito",
- "notificationMessageTemplates": "Modelli del messaggio di notifica",
- "rowValidationError": "È necessario almeno un modello di messaggio",
- "selectDescription": "Selezionare un messaggio di notifica. Per creare una nuova notifica, vedere Notifiche nella sezione Gestisci nel carico di lavoro Imposta la conformità dei dispositivi.",
- "tenantValueText": "Valore tenant",
- "testEmailLabel": "Invia il messaggio di posta elettronica di anteprima",
- "localeLabel": "Impostazioni locali",
- "isDefaultLocale": "È predefinito"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Numero di giorni di attesa prima del riavvio forzato"
- },
"Description": {
"label": "Descrizione"
},
+ "FeatureDeploymentSettings": {
+ "header": "Impostazioni di distribuzione delle funzionalità"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Questa funzionalità non può effettuare il downgrade di un dispositivo.",
+ "label": "Aggiornamento delle funzionalità da distribuire"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Disponibilità del gruppo finale"
+ },
+ "GradualRolloutInterval": {
+ "label": "Giorni tra gruppi"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Prima disponibilità del gruppo"
+ },
"Name": {
"label": "Nome"
},
- "QualityUpdateRelease": {
- "label": "Accelera l'installazione degli aggiornamenti qualitativi se la versione del sistema operativo è precedente a:"
- },
- "bladeTitle": "Aggiornamenti qualitativi Windows 10 e versioni successive (anteprima)",
- "loadError": "Il caricamento non è riuscito."
+ "OptionalUpdate": {
+ "label": "Aggiornamento obbligatorio o facoltativo"
+ },
+ "RolloutOptions": {
+ "label": "Opzioni di implementazione"
+ },
+ "RolloutSettings": {
+ "header": "Quando si desidera rendere disponibile l'aggiornamento in Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Configurare i tag di ambito per questo criterio."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "Prima data disponibile"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Disabilitato",
+ "enabled": "Abilitato",
+ "infoBalloonContent": "Controllare se installare l'ultimo aggiornamento delle funzionalità di Windows 10 nei dispositivi non idonei per Windows 11",
+ "label": "Quando un dispositivo non è idoneo per l'esecuzione di Windows 11, installa l'ultimo aggiornamento delle funzionalità Windows 10",
+ "notApplicable": "Non applicabile",
+ "summaryLabel": "Installa Windows 10 nei dispositivi non idonei per l'esecuzione di Windows 11"
+ },
+ "bladeTitle": "Distribuzione di aggiornamenti delle funzionalità",
+ "deploymentSettingsTitle": "Impostazioni di distribuzione",
+ "loadError": "Il caricamento non è riuscito.",
+ "windows11EULA": "Selezionando questo aggiornamento delle funzionalità per la distribuzione, accetti che quando si applica questo sistema operativo a un dispositivo (1) la licenza di Windows applicabile sia stata acquistata tramite contratti multilicenza o (2) che l'utente sia autorizzato a associare l'organizzazione e accetti per suo conto le Condizioni di licenza software Microsoft pertinente disponibile qui {0}."
},
+ "Notifications": {
+ "deploymentSaved": "Il salvataggio di \"{0}\" è stato completato.",
+ "newFeatureUpdateDeploymentCreated": "È stata creata una nuova distribuzione di aggiornamenti delle funzionalità."
+ },
"TabName": {
- "qualityUpdateSettings": "Impostazioni"
+ "deploymentSettings": "Impostazioni di distribuzione",
+ "groupAssignmentSettings": "Assegnazioni",
+ "scopeSettings": "Tag di ambito"
},
- "infoBoxText": "L'unico controllo dedicato per gli aggiornamenti qualitativi, oltre al criterio Fasi di aggiornamento esistente per Windows 10 e versioni successive, consiste nella possibilità di accelerare gli aggiornamenti qualitativi per dispositivi che non rispettano un livello specificato di patch. Controlli aggiuntivi saranno disponibili in futuro.",
- "licenseLearnMoreText": "Altre informazioni sui prerequisiti e sui criteri di aggiornamento qualitativo.",
- "licenseWarningBoxText": "La creazione di criteri di aggiornamento qualitativo richiede licenze specifiche.",
- "warningBoxText": "Benché l'accelerazione degli aggiornamenti software possa contribuire alla riduzione del tempo richiesto per ottenere la conformità, quando necessario, ha un impatto più ampio sulla produttività degli utenti finali. La probabilità che venga eseguito un riavvio forzato durante l'orario di ufficio viene incrementata significativamente."
+ "gradualRolloutLicenseWarning": "Questa funzionalità richiede licenze specifiche.",
+ "gradualRolloutLicenseWarningEdit": "Questa funzionalità può continuare a essere usata e configurata fino a quando il criterio non viene salvato senza questa funzionalità selezionata.",
+ "licenseLearnMoreText": "Altre informazioni sui prerequisiti e sui criteri di aggiornamento delle funzionalità.",
+ "optionalUpdateWarning": "Facoltativo è disponibile solo per gli aggiornamenti di Windows 11",
+ "profileNameWarning": "Il nome deve contenere meno di 64 caratteri",
+ "specificLicensingRequired": "Alcune funzionalità selezionate richiedono licenze specifiche."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64 bit",
- "thirtyTwoBit": "32 bit"
- },
- "TACSettings": {
- "edgeSettings": "Impostazioni di configurazione di Microsoft Edge",
- "edgeWindowsDataProtectionSettings": "Impostazioni di protezione dei dati di Microsoft Edge (Windows) - Anteprima",
- "edgeWindowsSettings": "Impostazioni di configurazione di Microsoft Edge (Windows) - Anteprima",
- "generalAppConfig": "Configurazione generale dell'app",
- "generalSettings": "Impostazioni di configurazione generali",
- "outlookSMIMEConfig": "Impostazioni di S/MIME per Outlook",
- "outlookSettings": "Impostazioni di configurazione di Outlook",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Aggiungi limite di rete",
- "addNetworkBoundaryButton": "Aggiungi limite di rete...",
- "allowWindowsSearch": "Consenti a Windows Search di eseguire una ricerca nei dati aziendali crittografati e nelle app dello Store",
- "authoritativeIpRanges": "L'elenco di intervalli IP aziendali è autorevole (non rilevare automaticamente)",
- "authoritativeProxyServers": "L'elenco di server proxy aziendali è autorevole (non rilevare automaticamente)",
- "boundaryType": "Tipo di limite",
- "cloudResources": "Risorse cloud",
- "corporateIdentity": "Identità aziendale",
- "dataRecoveryCert": "Caricare un certificato dell'agente di recupero dati per consentire il recupero dei dati crittografati",
- "editNetworkBoundary": "Modifica il limite di rete",
- "enrollmentState": "Stato della registrazione",
- "iPv4Ranges": "Intervalli IPv4",
- "iPv6Ranges": "Intervalli IPv6",
- "internalProxyServers": "Server proxy interni",
- "maxInactivityTime": "Intervallo di tempo massimo (in minuti) consentito in caso di inattività del dispositivo dopo il quale il dispositivo verrà bloccato tramite PIN o password",
- "maxPasswordAttempts": "Numero di errori di autenticazione consentiti prima della cancellazione dei dati del dispositivo",
- "mdmDiscoveryUrl": "URL individuazione MDM",
- "mdmRequiredSettingsInfo": "Questo criterio è applicabile solo a Windows 10 Anniversary Edition e versioni successive. Il criterio usa Windows Information Protection (WIP) per applicare la protezione.",
- "minimumPinLength": "Imposta il numero minimo di caratteri necessari per il PIN",
- "name": "Nome",
- "networkBoundariesGridEmptyText": "Eventuali limiti di rete aggiunti verranno visualizzati qui",
- "networkBoundary": "Limite di rete",
- "networkDomainNames": "Domini di rete",
- "neutralResources": "Risorse neutre",
- "passportForWork": "Usa Windows Hello for Business come metodo per l'accesso a Windows",
- "pinExpiration": "Specificare il periodo di tempo (in giorni) durante il quale è possibile usare un PIN prima che il sistema richieda all'utente di modificarlo",
- "pinHistory": "Specificare il numero di PIN precedenti che possono essere associati a un account utente e non possono essere riutilizzati",
- "pinLowercaseLetters": "Configura l'uso di lettere minuscole nel PIN di Windows Hello for Business",
- "pinSpecialCharacters": "Configura l'uso di caratteri speciali nel PIN di Windows Hello for Business",
- "pinUppercaseLetters": "Configura l'uso di lettere maiuscole nel PIN di Windows Hello for Business",
- "protectUnderLock": "Impedisci alle app di accedere ai dati aziendali quando il dispositivo è bloccato. Si applica solo a Windows 10 Mobile",
- "protectedDomainNames": "Domini protetti",
- "proxyServers": "Server proxy",
- "requireAppPin": "Disabilita il PIN dell'app quando il PIN del dispositivo è gestito",
- "requiredSettings": "Impostazioni obbligatorie",
- "requiredSettingsInfo": "La modifica dell'ambito o la rimozione del criterio comporterà la decrittografia dei dati aziendali.",
- "revokeOnMdmHandoff": "Revoca l'accesso ai dati protetti quando il dispositivo esegue la registrazione a MDM",
- "revokeOnUnenroll": "Revoca le chiavi di crittografia all'annullamento della registrazione",
- "rmsTemplateForEdp": "Specificare l'ID del modello da usare per Azure RMS",
- "showWipIcon": "Mostra l'icona di Protezione dei dati aziendali",
- "type": "Tipo",
- "useRmsForWip": "Usa Azure RMS per WIP",
- "value": "Valore",
- "weRequiredSettingsInfo": "Questo criterio è applicabile solo a Windows 10 Creators Update e versioni successive. Il criterio usa Windows Information Protection (WIP) e Windows MAM per applicare la protezione.",
- "wipProtectionMode": "Modalità di Windows Information Protection",
- "withEnrollment": "Con registrazione",
- "withoutEnrollment": "Senza registrazione"
+ "Platform": {
+ "all": "Tutto",
+ "android": "Amministratore di dispositivi Android",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Comune",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS e Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Sconosciuto",
+ "unsupported": "Non supportato",
+ "windows": "Windows",
+ "windows10": "Windows 10 e versioni successive",
+ "windows10CM": "Windows 10 e versioni successive (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 e versioni successive",
+ "windows8And10": "Windows 8 e 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 e versioni successive",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 e Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 e versioni successive (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "PC Windows"
+ },
+ "InstallIntent": {
+ "available": "Disponibile per i dispositivi registrati",
+ "availableWithoutEnrollment": "Disponibile con o senza registrazione",
+ "required": "Obbligatorio",
+ "uninstall": "Disinstalla"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filtro",
+ "noFilters": "Nessuno"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Autore",
- "template": "Nome modello"
- },
- "Row": {
- "ariaLabel": "riga {0} di {1} colonna {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Iniziare da zero e selezionare le proprietà da usare dalla libreria di impostazioni inventario disponibili"
- },
- "SettingsCatalog": {
- "subtitle": "Iniziare da zero e selezionare le impostazioni da usare dalla libreria di impostazioni disponibili",
- "title": "Catalogo di impostazioni"
- },
- "Templates": {
- "subtitle": "I modelli contengono gruppi di impostazioni, organizzati in base a funzionalità. Usare un modello quando non si vogliono creare manualmente i criteri o si vogliono configurare i dispositivi per accedere alle reti aziendali, ad esempio in caso di configurazione di WiFi o VPN.",
- "title": "Modelli"
- },
- "noData": "Non sono stati trovati modelli dei criteri"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Client desktop di Project Online",
- "visioProRetail": "Visio Online Piano 2"
- },
- "Countries": {
- "ae": "Emirati Arabi Uniti",
- "ag": "Antigua e Barbuda",
- "ai": "Anguilla",
- "al": "Albania",
- "am": "Armenia",
- "ao": "Angola",
- "ar": "Argentina",
- "at": "Austria",
- "au": "Australia",
- "az": "Azerbaigian",
- "bb": "Barbados",
- "be": "Belgio",
- "bf": "Burkina Faso",
- "bg": "Bulgaria",
- "bh": "Bahrein",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolivia",
- "br": "Brasile",
- "bs": "Bahamas",
- "bt": "Bhutan",
- "bw": "Botswana",
- "by": "Bielorussia",
- "bz": "Belize",
- "ca": "Canada",
- "cg": "Repubblica del Congo",
- "ch": "Svizzera",
- "cl": "Cile",
- "cn": "Cina",
- "co": "Colombia",
- "cr": "Costa Rica",
- "cv": "Cabo Verde",
- "cy": "Cipro",
- "cz": "Repubblica Ceca",
- "de": "Germania",
- "dk": "Danimarca",
- "dm": "Dominica",
- "do": "Repubblica dominicana",
- "dz": "Algeria",
- "ec": "Ecuador",
- "ee": "Estonia",
- "eg": "Egitto",
- "es": "Spagna",
- "fi": "Finlandia",
- "fj": "Figi",
- "fm": "Stati federati di Micronesia",
- "fr": "Francia",
- "gb": "Regno Unito",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Grecia",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hong Kong",
- "hn": "Honduras",
- "hr": "Croazia",
- "hu": "Ungheria",
- "id": "Indonesia",
- "ie": "Irlanda",
- "il": "Israele",
- "in": "India",
- "is": "Islanda",
- "it": "Italia",
- "jm": "Giamaica",
- "jo": "Giordania",
- "jp": "Giappone",
- "ke": "Kenya",
- "kg": "Kirghizistan",
- "kh": "Cambogia",
- "kn": "Saint Kitts e Nevis",
- "kr": "Repubblica di Corea del Sud",
- "kw": "Kuwait",
- "ky": "Isole Cayman",
- "kz": "Kazakhstan",
- "la": "Repubblica democratica popolare del Laos",
- "lb": "Libano",
- "lc": "Saint Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Lituania",
- "lu": "Lussemburgo",
- "lv": "Lettonia",
- "md": "Repubblica di Moldova",
- "mg": "Madagascar",
- "mk": "Macedonia del Nord",
- "ml": "Mali",
- "mn": "Mongolia",
- "mo": "Macao",
- "mr": "Mauritania",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Messico",
- "my": "Malaysia",
- "mz": "Mozambico",
- "na": "Namibia",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Paesi Bassi",
- "no": "Norvegia",
- "np": "Nepal",
- "nz": "Nuova Zelanda",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Perù",
- "pg": "Papua Nuova Guinea",
- "ph": "Filippine",
- "pk": "Pakistan",
- "pl": "Polonia",
- "pt": "Portogallo",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Romania",
- "ru": "Russia",
- "sa": "Arabia Saudita",
- "sb": "Isole Salomone",
- "sc": "Seychelles",
- "se": "Svezia",
- "sg": "Singapore",
- "si": "Slovenia",
- "sk": "Slovacchia",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Suriname",
- "st": "São Tomé e Príncipe",
- "sv": "El Salvador",
- "sz": "Swaziland",
- "tc": "Turks e Caicos",
- "td": "Ciad",
- "th": "Thailandia",
- "tj": "Tagikistan",
- "tm": "Turkmenistan",
- "tn": "Tunisia",
- "tr": "Turchia",
- "tt": "Trinidad e Tobago",
- "tw": "Taiwan",
- "tz": "Tanzania",
- "ua": "Ucraina",
- "ug": "Uganda",
- "us": "Stati Uniti",
- "uy": "Uruguay",
- "uz": "Uzbekistan",
- "vc": "Saint Vincent e Grenadine",
- "ve": "Venezuela",
- "vg": "Isole Vergini Britanniche",
- "vn": "Vietnam",
- "ye": "Yemen",
- "za": "Sudafrica",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Canale corrente",
- "deferred": "Canale aziendale semestrale",
- "firstReleaseCurrent": "Canale corrente (anteprima)",
- "firstReleaseDeferred": "Canale Enterprise semestrale (Anteprima)",
- "monthlyEnterprise": "Canale aziendale mensile",
- "placeHolder": "Selezionare una voce"
- },
- "AppProtection": {
- "allAppTypes": "Includi tutti i tipi di app",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "App nel profilo di lavoro di Android",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "App in dispositivi dedicati Android Enterprise con la modalità condivisa di Microsoft Entra",
- "appsOnAndroidOpenSourceProjectUserAssociated": "App in un progetto Open Source Android associato a un utente",
- "appsOnAndroidOpenSourceProjectUserless": "App in un progetto Open Source Android senza utente",
- "appsOnIntuneManagedDevices": "App nei dispositivi gestiti di Intune",
- "appsOnUnmanagedDevices": "App nei dispositivi non gestiti",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Non disponibile",
- "windows10PlatformLabel": "Windows 10 e versioni successive",
- "withEnrollment": "Con registrazione",
- "withoutEnrollment": "Senza registrazione"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Ruolo predefinito",
- "customCloudPCRole": "Ruolo di Windows 365 personalizzato",
- "customIntuneRole": "Ruolo di Intune personalizzato",
- "customRole": "Ruolo personalizzato"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} è incluso in uno o più set di criteri. Se si elimina {0}, non sarà più possibile assegnarlo tramite questi set di criteri. Eliminarlo comunque?",
- "contentWithError": "È possibile che {0} sia incluso in uno o più set di criteri. Se si elimina {0}, non sarà più possibile assegnarlo tramite questi set di criteri. Eliminarlo comunque?",
- "header": "Eliminare questa restrizione?"
- },
- "DeviceLimit": {
- "description": "Specificare il numero massimo di dispositivi che un utente può registrare.",
- "header": "Restrizioni sul limite di dispositivi",
- "info": "Consente di definire il numero di dispositivi che ogni utente può registrare."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Deve essere 1.0 o successiva.",
- "android": "Immettere un numero di versione valido. Esempi: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Immettere un numero di versione valido. Esempi: 5.0, 5.1.1",
- "iOS": "Immettere un numero di versione valido. Esempi: 9.0, 10.0, 9.0.2",
- "mac": "Immettere un numero di versione valido. Esempi: 10, 10.10, 10.10.1",
- "min": "Il valore minimo non può essere inferiore a {0}",
- "minMax": "La versione minima non può essere superiore alla versione massima.",
- "windows": "Deve essere 10.0 o versioni successive. Lasciare vuoto per consentire i dispositivi 8.1",
- "windowsMobile": "Deve essere 10.0 o versioni successive. Lasciare vuoto per consentire i dispositivi 8.1"
- },
- "allPlatformsBlocked": "Tutte le piattaforme dei dispositivi sono bloccate. Consentire la registrazione della piattaforma per abilitare la configurazione della piattaforma.",
- "blockManufacturerPlaceHolder": "Nome del produttore",
- "blockManufacturersHeader": "Produttori bloccati",
- "cannotRestrict": "La restrizione non è supportata",
- "configurationDescription": "Specificare le restrizioni della configurazione della piattaforma da soddisfare per consentire la registrazione di un dispositivo. Usare i criteri di conformità per limitare i dispositivi dopo la registrazione. Definire le versioni come major.minor.build. Le restrizioni sulla versione sono applicabili solo ai dispositivi registrati nel portale aziendale. Intune classifica i dispositivi come di proprietà personale per impostazione predefinita. Per classificare i dispositivi come di proprietà dell'azienda sono necessarie azioni aggiuntive.",
- "configurationDescriptionLabel": "Altre informazioni sulla configurazione delle restrizioni della registrazione",
- "configurations": "Configura le piattaforme",
- "deviceManufacturer": "Produttore dispositivo",
- "header": "Restrizioni dei tipi di dispositivo",
- "info": "Consente di definire le piattaforme, le versioni e i tipi di gestione autorizzati alla registrazione.",
- "manufacturer": "Produttore",
- "max": "Max",
- "maxVersion": "Versione massima",
- "min": "Min",
- "minVersion": "Versione minima",
- "newPlatforms": "Sono state autorizzate nuove piattaforme. Prendere in considerazione l'aggiornamento delle configurazioni delle piattaforme.",
- "personal": "Di proprietà personale",
- "platform": "Piattaforma",
- "platformDescription": "È possibile consentire la registrazione delle piattaforme seguenti. Bloccare solo le piattaforme che non verranno supportate. Le piattaforme consentite possono essere configurate con restrizioni registrazione aggiuntive.",
- "platformSettings": "Impostazioni piattaforma",
- "platforms": "Seleziona le piattaforme",
- "platformsSelected": "{0} piattaforme selezionate",
- "type": "Tipo",
- "versions": "versioni",
- "versionsRange": "Consenti un intervallo min/max:",
- "windowsTooltip": "Consente di limitare la registrazione tramite Mobile Device Management. Non limita l'installazione dell'agente del computer. Sono supportate solo le versioni Windows 10 e Windows 11. Lasciare le versioni vuote per consentire Windows 8.1."
- },
- "Priority": {
- "saved": "Le priorità delle restrizioni sono state salvate."
- },
- "Row": {
- "announce": "Priorità: {0}, nome: {1}, assegnata: {2}"
- },
- "Table": {
- "deployed": "Distribuito",
- "name": "Nome",
- "priority": "Priorità"
- },
- "Type": {
- "limit": "Restrizione sul limite di dispositivi",
- "type": "Restrizione dei tipi di dispositivo"
- },
- "allUsers": "Tutti gli utenti",
- "androidRestrictions": "Restrizioni Android",
- "create": "Crea restrizione",
- "defaultLimitDescription": "Restrizione sul limite di dispositivi predefinita applicata con la priorità più bassa a tutti gli utenti, indipendentemente dall'appartenenza ai gruppi.",
- "defaultTypeDescription": "Restrizione sul tipo di dispositivi predefinita applicata con la priorità più bassa a tutti gli utenti, indipendentemente dall'appartenenza ai gruppi.",
- "defaultWhfbDescription": "Questa è la configurazione predefinita di Windows Hello for Business applicata con la priorità più bassa a tutti gli utenti, indipendentemente dall'appartenenza ai gruppi.",
- "deleteMessage": "Gli utenti interessati saranno limitati dalla restrizione di priorità più elevata successiva assegnata o dalla restrizione predefinita, se non sono assegnate altre restrizioni.",
- "deleteTitle": "Eliminare la restrizione {0}?",
- "descriptionHint": "Breve paragrafo che illustra l'uso aziendale o il livello di restrizione caratterizzato dalle impostazioni di restrizione.",
- "edit": "Modifica la restrizione",
- "info": "Un dispositivo deve essere conforme alle restrizioni della registrazione con priorità più elevata assegnate al rispettivo utente. È possibile trascinare una restrizione del dispositivo per modificarne la priorità. Le restrizioni predefinite hanno la priorità più bassa per tutti gli utenti e regolamentano le registrazioni senza utenti. Le restrizioni predefinite possono essere modificate ma non eliminate.",
- "iosRestrictions": "Restrizioni iOS",
- "mDM": "Gestione dispositivi mobili",
- "macRestrictions": "Restrizioni macOS",
- "maxVersion": "Versione massima",
- "minVersion": "Versione minima",
- "nameHint": "Questo sarà l'attributo principale visibile per l'identificazione del set di restrizioni.",
- "noAssignmentsStatusBar": "Assegnare la restrizione ad almeno un gruppo. Fare clic su Proprietà.",
- "nonAdminForbiddenCreateError": "Per creare, modificare o eliminare restrizioni, è necessario essere un servizio o un amministratore globale di Intune.",
- "nonAdminForbiddenEdit": "Devi essere un amministratore per modificare le restrizioni.",
- "notFound": "La limitazione non è stata trovata. È possibile che sia già stata eliminata.",
- "personallyOwned": "Dispositivi di proprietà personale",
- "restriction": "Restrizione",
- "restrictionLowerCase": "restrizione",
- "restrictionType": "Tipo restrizione",
- "selectType": "Selezionare il tipo di restrizione",
- "selectValidation": "Selezionare una piattaforma",
- "typeHint": "Scegliere Restrizione dei tipi di dispositivo per limitare le proprietà dei dispositivi. Scegliere Restrizione sul limite di dispositivi per limitare il numero di dispositivi per utente.",
- "typeRequired": "Il tipo di restrizione è obbligatorio.",
- "winPhoneRestrictions": "Restrizioni Windows Phone",
- "windowsECv1Info": "Le restrizioni di registrazione meno recenti non possono essere modificate o ridimensionate, ma solo eliminate.",
- "windowsECv2Info": "È possibile dare priorità alle restrizioni di registrazione trascinandole e rilasciandole. Di seguito sono elencate le restrizioni predefinite e preconfigurate. Tutte le nuove restrizioni di registrazione avranno una priorità superiore rispetto alle restrizioni predefinite e preconfigurate.",
- "windowsRestrictions": "Restrizioni Windows",
- "windowsRestrictionsPreview": "Restrizioni di Windows basate su filtro (anteprima)"
- },
- "InstallContextType": {
- "device": "Dispositivo",
- "deviceContext": "Contesto di dispositivo",
- "user": "Utente",
- "userContext": "Contesto utente"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Descrizione",
- "placeholder": "Immettere una descrizione"
- },
- "NameTextBox": {
- "label": "Nome",
- "placeholder": "Immettere un nome"
- },
- "PublisherTextBox": {
- "label": "Server di pubblicazione",
- "placeholder": "Immettere un autore"
- },
- "VersionTextBox": {
- "label": "Versione"
- },
- "headerDescription": "Consente di creare un nuovo pacchetto di script personalizzato dagli script di rilevamento e correzione scritti dall'utente."
- },
- "ScopeTags": {
- "headerDescription": "Selezionare uno o più gruppi a cui assegnare il pacchetto di script."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Script di rilevamento",
- "placeholder": "Inserire il testo dello script",
- "requiredValidationMessage": "Immettere lo script di rilevamento"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Imponi il controllo della firma degli script"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Esegui lo script con le credenziali dell'utente connesso"
- },
- "RemediationScript": {
- "infoBox": "Questo script verrà eseguito in modalità di solo rilevamento perché non è presente alcuno script di correzione."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Script di monitoraggio e aggiornamento",
- "placeholder": "Inserire il testo dello script"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Esegui lo script in PowerShell a 64 bit"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Lo script non è valido. Uno o più caratteri usati nello script non sono validi."
- },
- "headerDescription": "Consente di creare un pacchetto di script personalizzato dagli script scritti dall'utente. Per impostazione predefinita, gli script verranno eseguiti ogni giorno nei dispositivi assegnati.",
- "infoBox": "Lo script è di sola lettura. È possibile che alcune impostazioni per lo script siano disabilitate."
- },
- "title": "Crea uno script personalizzato",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Intervallo",
- "time": "Data e ora"
- },
- "Interval": {
- "day": "Ripetizione ogni giorno",
- "days": "Ripetizione ogni {0} giorni",
- "hour": "Ripetizione ogni ora",
- "hours": "Si ripete ogni {0} ore",
- "month": "Ripetizione ogni mese",
- "months": "Ripetizione ogni {0} mesi",
- "week": "Ripetizione ogni settimana",
- "weeks": "Ripetizione ogni {0} settimane"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) in data {1}",
- "withDate": "{0} in data {1}"
- }
- }
- },
- "Edit": {
- "title": "Modifica - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "URL consentiti",
- "tooltip": "Specificare i siti a cui gli utenti sono autorizzati ad accedere entro il rispettivo contesto di lavoro. Non saranno consentiti altri siti. È possibile scegliere di configurare un elenco di siti consentiti/bloccati, ma non entrambi i tipi di siti. "
- },
- "ApplicationProxyRedirection": {
- "header": "Proxy dell'applicazione",
- "title": "Reindirizzamento del proxy applicazione",
- "tooltip": "Abilitare il reindirizzamento del proxy app per fornire agli utenti l'accesso ai collegamenti aziendali e alle app Web locali."
- },
- "BlockedURLs": {
- "title": "URL bloccati",
- "tooltip": "Specificare i siti bloccati per gli utenti entro il rispettivo contesto di lavoro. Tutti gli altri siti saranno consentiti. È possibile scegliere di configurare un elenco di siti consentiti/bloccati, ma non entrambi i tipi di siti. "
- },
- "Bookmarks": {
- "header": "Segnalibri gestiti",
- "tooltip": "Immettere un elenco di URL aggiunti ai segnalibri in modo che siano disponibili per gli utenti durante l'uso di Microsoft Edge nel rispettivo contesto di lavoro.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Home page gestita",
- "title": "URL del collegamento della home page",
- "tooltip": "Configurare un collegamento della home page che verrà visualizzato agli utenti come prima icona sotto la barra di ricerca all'apertura di una nuova scheda in Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Reindirizza i siti con restrizioni al contesto personale",
- "tooltip": "Specificare se gli utenti sono autorizzati a eseguire la transizione al contesto personale per aprire siti con restrizioni."
- }
- },
- "BooleanActions": {
- "allow": "Consentire",
- "block": "Blocca",
- "configured": "Configurato",
- "disable": "Disabilita",
- "dontRequire": "Non rendere obbligatorio",
- "enable": "Abilita",
- "hide": "Nascondi",
- "limit": "Limite",
- "notConfigured": "Non configurato",
- "require": "Rendi obbligatorio",
- "show": "Mostra",
- "yes": "Sì"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Rendere disponibile agli utenti come aggiornamento facoltativo",
- "optionalValue": "Facoltativo",
- "required": "Rendere disponibile agli utenti come aggiornamento necessario",
- "requiredValue": "Obbligatorio"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 giorno",
- "twoDays": "2 giorni",
- "zeroDays": "0 giorni"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Panoramica"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Cerca per dispositivo, utente o versione dell'aggiornamento qualitativo."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Non è stato possibile caricare i profili di aggiornamento software iOS"
- }
- },
- "SummaryBlade": {
- "subtitle": "Profilo di aggiornamento iOS",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profilo"
- },
- "listLoadError": "Non è possibile caricare i profili di aggiornamento software iOS. Riprovare più tardi",
- "lowercase": "Criteri di aggiornamento per iOS",
- "uppercase": "Criteri di aggiornamento per iOS"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Non è possibile connettersi ad Apple per ottenere l'elenco di versioni disponibili. Riprovare più tardi o continuare con la versione più recente.",
- "latestUpdate": "Aggiornamento più recente",
- "noLongerSupported": "La versione selezionata non è più supportata",
- "olderVersionSelected": "Poiché è stata selezionata una versione precedente, assicurarsi di applicare un criterio di limitazione del dispositivo che posticipa la visibilità degli aggiornamenti software, in modo che i dispositivi non possano eseguire l'aggiornamento alla versione più recente.",
- "prefix": "Installa iOS/iPadOS",
- "selectSupported": "Selezionare la versione dell'aggiornamento supportata da Apple",
- "updateToInstall": "Aggiornamento da installare"
- },
- "Schedule": {
- "always": "Aggiorna alla sincronizzazione successiva",
- "duringTimeWindows": "Aggiorna durante l'orario pianificato",
- "header": "Per impostazione predefinita, quando un criterio di aggiornamento viene assegnato a un dispositivo, Intune distribuisce gli aggiornamenti più recenti al momento dell'archiviazione del dispositivo. È invece possibile creare una pianificazione settimanale con ore di inizio e fine personalizzate. Se si sceglie di eseguire l'aggiornamento al di fuori dell'ora pianificata, Intune non distribuirà gli aggiornamenti fino al termine dell'ora pianificata.",
- "infoBalloon": "Orario in cui verranno eseguiti gli aggiornamenti. Per pianificare aggiornamenti durante o all'esterno degli orari pianificati è necessario input aggiuntivo.",
- "label": "Tipo di pianificazione",
- "outsideActiveHours": "Aggiorna all'esterno dell'orario di attività (legacy)",
- "outsideTimeWindows": "Aggiorna in orari diversi da quello pianificato",
- "timeWindow": "Intervallo di tempo",
- "timeZone": "Fuso orario",
- "title": "Aggiorna le impostazioni di pianificazione dei criteri:",
- "weekly": "Pianificazione settimanale",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "Versione di iOS/iPadOS da installare nei dispositivi durante l'aggiornamento.",
- "label": "Selezionare la versione da installare"
- },
- "header": "Creare un profilo per imporre l'installazione automatica degli aggiornamenti più recenti per iOS/iPadOS nei dispositivi assegnati. Queste impostazioni determinano come e quando vengono distribuiti gli aggiornamenti software. Questo profilo non impedisce agli utenti di aggiornare manualmente il sistema operativo. È possibile impedire tale aggiornamento per al massimo 90 giorni con un criterio di restrizione di Configurazione del dispositivo. Gli aggiornamenti verranno applicati solo ai dispositivi supervisionati.",
- "notAvailable": "N/D"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Non sono presenti criteri di aggiornamento per iOS da visualizzare",
- "macOsUpdates": "Non sono presenti criteri di aggiornamento per il software macOS da visualizzare",
- "windowsUpdates": "Non sono presenti anelli di aggiornamento da visualizzare per Windows 10 e versioni successive."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Nome dispositivo",
- "deviceUpdateStatus": "Stato di aggiornamento del dispositivo",
- "lastUpdated": "Ultimo aggiornamento",
- "osVersion": "Versione del sistema operativo",
- "userPrincipalName": "Nome utente"
- },
- "maximumOSVersionFilter": "Versione massima del sistema operativo",
- "minimumOSVersionFilter": "Versione minima del sistema operativo",
- "noData": "Nessun dato da visualizzare",
- "searchBoxPlaceholder": "Cerca in base a nome del dispositivo, nome utente o versione del sistema operativo",
- "title": "Riepilogo account per dispositivi macOS"
- },
- "Category": {
- "configurationDataFile": "File di dati di configurazione",
- "critical": "Critico",
- "firmware": "Firmware",
- "other": "Altro"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Ultimo aggiornamento",
- "successfulUpdateCount": "Aggiornamenti distribuiti correttamente",
- "totalUpdateCount": "Totale aggiornamenti distribuiti",
- "updateCategory": "Categoria di aggiornamento",
- "updateCategoryStatus": "Stato della categoria di aggiornamento"
- },
- "noData": "Nessun dato da visualizzare"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Non è stato possibile caricare i profili di aggiornamento software macOS"
- }
- },
- "State": {
- "available": "Disponibili",
- "commandFailed": "Il comando non è riuscito",
- "downloadFailed": "Download non riuscito",
- "downloadInsufficientNetwork": "La rete è insufficiente per il download",
- "downloadInsufficientPower": "L'alimentazione non è sufficiente per il download",
- "downloadInsufficientSpace": "Lo spazio non è sufficiente per il download",
- "downloaded": "Download completato",
- "downloading": "Download in corso",
- "idle": "Inattivo",
- "installFailed": "Installazione non riuscita",
- "installInsufficientPower": "L'alimentazione non è sufficiente per l'installazione",
- "installInsufficientSpace": "Lo spazio non è sufficiente per l'installazione",
- "installing": "Installazione",
- "scheduled": "Pianificata",
- "success": "Operazione riuscita",
- "unknown": "Sconosciuto"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Ultimo aggiornamento",
- "updateName": "Nome aggiornamento",
- "updateStatus": "Stato aggiornamento",
- "version": "Versione"
- },
- "noData": "Nessun dato da visualizzare",
- "searchBoxPlaceholder": "Cerca in base a nome o versione dell'aggiornamento"
- },
- "SummaryBlade": {
- "subtitle": "Profilo di aggiornamento macOS",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profilo"
- },
- "error": "Errore",
- "errorOrErrors": "Errori",
- "errors": "Errori",
- "listLoadError": "Non è possibile caricare i profili di aggiornamento software macOS. Riprovare più tardi",
- "lowercase": "Criteri di aggiornamento macOs",
- "other": "Altro",
- "subtitle": "Aggiornamento software MacOS",
- "upToDate": "Aggiornato",
- "uppercase": "Criteri di aggiornamento macOS"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Riprovare più tardi",
- "title": "Non è stato possibile eliminare {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Riprovare più tardi"
- },
- "LoadConfigurationFailed": {
- "description": "Riprovare più tardi",
- "title": "Non è stato possibile caricare {0}"
- },
- "idWrongFormat": "Il formato dell'ID specificato per il profilo non corrisponde a quello previsto."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "È necessario selezionare almeno una finestra temporale",
- "tooMany": "È possibile configurare al massimo 20 finestre temporali"
- }
- },
- "endDay": "Fine della giornata",
- "endTime": "Ora di fine",
- "startDay": "Inizio della giornata",
- "startTime": "Ora di inizio",
- "timeWindowError": "Scegliere un intervallo di tempo che copre almeno un'ora."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Non è stato possibile caricare i profili dell'anello di aggiornamento per Windows 10 e versioni successive."
- }
- },
- "SummaryBlade": {
- "subtitle": "Anello di aggiornamento per Windows 10 e versioni successive",
- "title": "Windows Update per le aziende"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 e versioni successive",
- "title": "Anello di aggiornamento per Windows 10 e versioni successive"
- },
- "listLoadError": "Non è possibile caricare i profili degli anelli di aggiornamento per Windows 10 e versioni successive, riprovare più tardi",
- "lowercase": "Fase di aggiornamento",
- "uppercase": "Fase di aggiornamento"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Aggiorna le impostazioni del criterio",
- "updateRingSettings": "Impostazioni per la fase di aggiornamento"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Crea {0}",
- "edit": "Modifica {0}"
- }
- },
- "notScannedYet": "Non ancora analizzato",
- "outOfDateIosDevices": "Dispositivi iOS non aggiornati"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Limitazioni del dispositivo (proprietario del dispositivo)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "Criteri di aggiornamento per iOS"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "È uguale a",
+ "greaterThan": "Maggiore di",
+ "greaterThanOrEqualTo": "Maggiore o uguale a",
+ "lessThan": "Minore di",
+ "lessThanOrEqualTo": "Minore o uguale a",
+ "notEqualTo": "Diverso da"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Imponi il controllo della firma degli script ed esegui lo script automaticamente",
+ "enforceSignatureCheckTooltip": "Selezionare 'Sì' per verificare che lo script sia firmato da un'entità di pubblicazione attendibile, in modo da consentire l'esecuzione dello script senza la visualizzazione di avvisi o richieste. Lo script verrà eseguito senza essere bloccato. Selezionare 'No' (impostazione predefinita) per eseguire lo script con la conferma dell'utente finale senza la verifica della firma.",
+ "header": "Usa uno script di rilevamento personalizzato",
+ "runAs32Bit": "Esegui lo script come processo a 32 bit nei client a 64 bit",
+ "runAs32BitTooltip": "Selezionare 'Sì' per eseguire lo script in un processo a 32 bit nei client a 64 bit. Selezionare 'No' (impostazione predefinita) per eseguire lo script in un processo a 64 bit nei client a 64 bit. I client a 32 bit eseguono lo script in un processo a 32 bit.",
+ "scriptContent": "Contenuto dello script",
+ "scriptFile": "File di script",
+ "scriptFileNotSelectedValidation": "Non è stato selezionato alcun file di script.",
+ "scriptFileTooltip": "Selezionare uno script di PowerShell che rileverà la presenza dell'app sul client. L'app verrà rilevata quando lo script restituisce un codice di uscita con valore 0 e scrive un valore di stringa in STDOUT.",
+ "scriptSizeLimitValidation": "Lo script di rilevamento supera le dimensioni massime consentite. Risolvere questo errore riducendo le dimensioni dello script di rilevamento."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Data creazione",
+ "dateModified": "Data di modifica",
+ "doesNotExist": "Il file o la cartella non esiste",
+ "fileOrFolderExists": "File o cartella esistente",
+ "sizeInMB": "Dimensioni in MB",
+ "version": "Stringa (versione)"
+ },
+ "associatedWith32Bit": "Associata a un'app a 32 bit nei client a 64 bit",
+ "associatedWith32BitTooltip": "Selezionare 'Sì' per espandere eventuali variabili di ambiente PATH nel contesto a 32 bit nei client a 64 bit. Selezionare 'No' (impostazione predefinita) per espandere eventuali variabili di ambiente nel contesto a 64 bit nei client a 64 bit. I client a 32 bit useranno sempre il contesto a 32 bit.",
+ "detectionMethod": "Metodo di rilevamento",
+ "detectionMethodTooltip": "Selezionare il tipo di metodo di rilevamento usato per convalidare la presenza dell'app.",
+ "fileOrFolder": "File o cartella",
+ "fileOrFolderToolTip": "File o cartella da rilevare.",
+ "operator": "Operatore",
+ "operatorTooltip": "Selezionare l'operatore per il metodo di rilevamento usato per convalidare il confronto.",
+ "path": "Percorso",
+ "pathTooltip": "Percorso completo della cartella contenente il file o la cartella da rilevare.",
+ "value": "Valore",
+ "valueTooltip": "Selezionare un valore corrispondente al metodo di rilevamento selezionato. I metodi di rilevamento della data devono essere immessi in ora locale."
+ },
+ "GridColumns": {
+ "pathOrCode": "Percorso/Codice",
+ "type": "Tipo"
+ },
+ "MsiRule": {
+ "operator": "Operatore",
+ "operatorTooltip": "Selezionare l'operatore per il confronto per la convalida della versione del prodotto MSI.",
+ "productCode": "Codice prodotto MSI",
+ "productCodeTooltip": "Codice prodotto MSI valido per l'app.",
+ "productVersion": "Valore",
+ "productVersionCheck": "Verifica della versione del prodotto MSI",
+ "productVersionCheckTooltip": "Selezionare 'Sì' per verificare la versione del prodotto MSI oltre al codice prodotto MSI.",
+ "productVersionTooltip": "Immettere la versione del prodotto MSI per l'app."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Confronto di numeri interi",
+ "keyDoesNotExist": "Chiave inesistente",
+ "keyExists": "Chiave esistente",
+ "stringComparison": "Confronto di stringhe",
+ "valueDoesNotExist": "Valore inesistente",
+ "valueExists": "Valore esistente",
+ "versionComparison": "Confronto tra le versioni"
+ },
+ "associatedWith32Bit": "Associata a un'app a 32 bit nei client a 64 bit",
+ "associatedWith32BitTooltip": "Selezionare 'Sì' per eseguire ricerche nel Registro di sistema a 32 bit nei client a 64 bit. Selezionare 'No' (impostazione predefinita) per eseguire ricerche nel Registro di sistema a 64 bit nei client a 64 bit. I client a 32 bit eseguiranno sempre ricerche nel registro di sistema a 32 bit.",
+ "detectionMethod": "Metodo di rilevamento",
+ "detectionMethodTooltip": "Selezionare il tipo di metodo di rilevamento usato per convalidare la presenza dell'app.",
+ "keyPath": "Percorso della chiave",
+ "keyPathTooltip": "Percorso completo della voce del Registro di sistema contenente il valore da rilevare.",
+ "operator": "Operatore",
+ "operatorTooltip": "Selezionare l'operatore per il metodo di rilevamento usato per convalidare il confronto.",
+ "value": "Valore",
+ "valueName": "Nome valore",
+ "valueNameTooltip": "Nome del valore del Registro di sistema da rilevare.",
+ "valueTooltip": "Selezionare un valore corrispondente al metodo di rilevamento selezionato."
+ },
+ "RuleTypeOptions": {
+ "file": "File",
+ "mSI": "MSI",
+ "registry": "Registro"
+ },
+ "gridAriaLabel": "Regole di rilevamento",
+ "header": "Creare una regola che indichi la presenza dell'app.",
+ "noRulesSelectedPlaceholder": "Non è stata specificata alcuna regola.",
+ "ruleTableLimit": "È possibile aggiungere fino a 25 regole di rilevamento",
+ "ruleType": "Tipo regola",
+ "ruleTypeTooltip": "Scegliere il tipo di regola di rilevamento da aggiungere."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Usa uno script di rilevamento personalizzato",
+ "manual": "Configura manualmente le regole di rilevamento"
+ },
+ "bladeTitle": "Regole di rilevamento",
+ "header": "Configurare regole specifiche dell'app usate per rilevare la presenza dell'app.",
+ "rulesFormat": "Formato delle regole",
+ "rulesFormatTooltip": "Scegliere di configurare manualmente le regole di rilevamento o usare uno script personalizzato per rilevare la presenza dell'app.",
+ "selectorLabel": "Regole di rilevamento"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Accetta le Condizioni di licenza software Microsoft per conto degli utenti",
"appSuiteConfigurationLabel": "Configurazione della suite di app",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} lingua o lingue selezionate",
"xmlConfigurationLabel": "Configurazione XML"
},
- "Filters": {
- "ruleSyntax": "Sintassi delle regole",
- "filters": "Filtri"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Consenti all'utente di cambiare impostazione",
- "tooltip": "Specificare se l'utente è autorizzato a modificare l'impostazione."
- },
- "AllowWorkAccounts": {
- "title": "Consenti solo account aziendali o dell'istituto di istruzione",
- "tooltip": " Se si abilita questa impostazione, gli utenti non potranno aggiungere account di posta elettronica personali e account di archiviazione in Outlook. Se l'utente aggiunge un account personale a Outlook, verrà richiesta la rimozione dell'account personale. Se l'utente non rimuove l'account personale, non sarà possibile aggiungere l'account aziendale o dell'istituto di istruzione."
- },
- "BlockExternalImages": {
- "title": "Blocca le immagini esterne",
- "tooltip": "Quando il blocco delle immagini esterne è abilitato, l'app impedirà il download di immagini ospitate su Internet incorporate nel corpo del messaggio. Se questa opzione non viene configurata, l'impostazione predefinita per l'app è Off"
- },
- "ConfigureEmail": {
- "title": "Configura le impostazioni dell'account di posta elettronica"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "L'opzione Firma dell'app predefinita indica se l'app userà \"Ottieni Outlook per Android\" come firma predefinita durante la composizione del messaggio. Se l'impostazione è configurata come Off, la firma predefinita non verrà usata. Gli utenti possono tuttavia aggiungere la propria firma.\r\n\r\nSe l'opzione è impostata su Non configurata, l'impostazione predefinita dell'app è On.",
- "iOS": "L'opzione Firma dell'app predefinita indica se l'app userà \"Ottieni Outlook per iOS\" come firma predefinita durante la composizione del messaggio. Se l'impostazione è configurata come Off, la firma predefinita non verrà usata. Gli utenti possono tuttavia aggiungere la propria firma.\r\n\r\nSe l'opzione è impostata su Non configurata, l'impostazione predefinita dell'app è On."
- },
- "title": "Firma dell'app predefinita"
- },
- "OfficeFeedReplies": {
- "title": "Feed di individuazione",
- "tooltip": "Il feed di individuazione espone i file di Office a cui si accede più spesso. Per impostazione predefinita, questo feed viene abilitato quando Delve è abilitato per l'utente. Se non si configura questa opzione, l'impostazione predefinita dell'app è On."
- },
- "OrganizeMailByThread": {
- "title": "Organizza i messaggi in base al thread",
- "tooltip": "Il comportamento predefinito in Outlook prevede l'aggregazione delle conversazioni tramite posta elettronica in una visualizzazione di conversazioni in thread. Se questa impostazione è disabilitata, Outlook visualizzerà ogni messaggio individualmente e non raggrupperà i messaggi in base al thread."
- },
- "PlayMyEmails": {
- "title": "Riproduci i messaggi di posta elettronica",
- "tooltip": "La funzionalità Riproduci i messaggi di posta elettronica non è abilitata per impostazione predefinita nell'app, ma viene promossa a utenti idonei tramite un banner nella Posta in arrivo. Se questa opzione è impostata su Off, la funzionalità non verrà promossa a utenti idonei nell'app. Gli utenti possono scegliere di abilitare manualmente l'opzione Riproduci i messaggi di posta elettronica dall'app, anche quando questa funzionalità è impostata su Off. Se questa opzione è impostata su Non configurata, l'impostazione predefinita per l'app è On e la funzionalità verrà promossa agli utenti idonei."
- },
- "SuggestedReplies": {
- "title": "Risposte suggerite",
- "tooltip": "Quando si apre un messaggio, è possibile che Outlook suggerisca risposte sotto il messaggio. Se si seleziona una risposta suggerita, è possibile modificarla prima dell'invio."
- },
- "SyncCalendars": {
- "title": "Sincronizza i calendari",
- "tooltip": "Determinare se gli utenti possono sincronizzare il calendario di Outlook con l'app e il database del calendario nativo."
- },
- "TextPredictions": {
- "title": "Completamenti del testo",
- "tooltip": "Outlook può suggerire parole e frasi durante la composizione di messaggi. Quando Outlook offre un suggerimento, scorrere rapidamente per accettarlo. Quando questa opzione è impostata su Non configurato, l'impostazione predefinita dell'app sarà impostata su On."
- },
- "ThemesEnabled": {
- "title": "Temi abilitati",
- "tooltip": "Specificare se l'utente è autorizzato a usare un tema visivo personalizzato."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "Dispositivi Chrome OS"
- },
- "ManagedDesktop": {
- "adminContacts": "Contatti amministratore",
- "appPackaging": "Pacchetti dell'app",
- "autopatchGroups": "Gruppi di patch automatiche",
- "devices": "Dispositivi",
- "featureEnablement": "Attivazione funzionalità",
- "feedback": "Feedback",
- "gettingStarted": "Riquadro attività iniziale",
- "messages": "Messaggi",
- "onlineResources": "Risorse in linea",
- "policyHealth": "Integrità criteri",
- "policyHealthPreview": "Integrità dei criteri (anteprima)",
- "releaseManagement": "Release Management",
- "serviceRequests": "Richieste del servizio",
- "settings": "Impostazioni",
- "supportRequests": "Richieste di supporto",
- "tenantEnrollment": "Registrazione del tenant",
- "tenantManagement": "Gestione tenant"
- },
- "actions": "Azioni per la non conformità",
- "advancedExchangeSettings": "Impostazioni di Exchange Online",
- "advancedThreatProtection": "Microsoft Defender per endpoint",
- "allApps": "Tutte le app",
- "allDevices": "Tutti i dispositivi",
- "androidFotaDeployments": "Distribuzioni Android FOTA",
- "appBundles": "Bundle dell'app",
- "appCategories": "Categorie di app",
- "appConfigPolicies": "Criteri di configurazione dell'app",
- "appConfigurationStatus": "Stato di configurazione delle app",
- "appInstallStatus": "Stato di installazione dell'app",
- "appLicences": "Licenze dell'app",
- "appProtectionPolicies": "Criteri di protezione delle app",
- "appProtectionStatus": "Stato di protezione delle app",
- "appSelectiveWipe": "Cancellazione selettiva di app",
- "appleVppTokens": "Token VPP Apple",
- "apps": "App",
- "assign": "Assegnazioni",
- "assignedPermissions": "Autorizzazioni assegnate",
- "assignedRoles": "Ruoli assegnati",
- "autopilotDeploymentReport": "Distribuzioni di Autopilot (anteprima)",
- "autopilotDeploymentReportV2": "Distribuzioni Autopilot 2.0 (anteprima)",
- "brandingAndCustomization": "Personalizzazione",
- "cartProfiles": "Profili del carrello",
- "certificateConnectors": "Connettori di certificati",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Dispositivi collegati al cloud (anteprima)",
- "cloudPcActions": "Azioni di Cloud PC (anteprima)",
- "cloudPcMaintenanceWindows": "Finestre di manutenzione di Cloud PC (anteprima)",
- "compliancePolicies": "Criteri di conformità",
- "complianceScriptManagement": "Script",
- "complianceScriptManagementPreview": "Script (anteprima)",
- "complianceSettings": "Impostazioni dei criteri di conformità",
- "conditionStatements": "Dichiarazioni sulle condizioni",
- "conditions": "Percorsi",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Profili di configurazione",
- "configurationScripts": "Script di configurazione",
- "connectorsAndTokens": "Connettori e token",
- "corporateDeviceIdentifiers": "Identificatori dei dispositivi aziendali",
- "customAttributes": "Attributi personalizzati",
- "customNotifications": "Notifiche personalizzate",
- "deploymentSettings": "Impostazioni di distribuzione",
- "derivedCredentials": "Credenziali derivate",
- "deviceActions": "Azioni del dispositivo",
- "deviceCategories": "Categorie di dispositivi",
- "deviceCleanUp": "Regole per la pulizia del dispositivo",
- "deviceEnrollmentManagers": "Manager di registrazione dispositivi",
- "deviceExecutionStatus": "Stato del dispositivo",
- "deviceLimitEnrollmentRestrictions": "Restrizioni sui limiti di registrazione di dispositivi",
- "deviceTypeEnrollmentRestrictions": "Restrizioni della piattaforma del dispositivo di registrazione",
- "devices": "Dispositivi",
- "discoveredApps": "App individuate",
- "edgePolicies": "Criteri per Microsoft Edge",
- "embeddedSIM": "Profili cellulare eSIM (anteprima)",
- "enrollDevices": "Registra i dispositivi",
- "enrollmentFailures": "Errori di registrazione",
- "enrollmentNotifications": "Notifiche di registrazione (anteprima)",
- "enrollmentRestrictions": "Restrizioni registrazione",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Connettori di servizi Exchange",
- "failuresForCumulativeQualityUpdates": "Errori di aggiornamento qualitativo cumulativo di Windows",
- "failuresForDriverUpdates": "Errori di aggiornamento del driver Windows",
- "failuresForFeatureUpdates": "Errori di aggiornamento delle funzionalità",
- "failuresForQualityUpdates": "Errori di aggiornamento urgente di Windows",
- "featureFlighting": "Distribuzione di versioni di anteprima delle funzionalità",
- "featureUpdateDeployments": "Aggiornamenti delle funzionalità per Windows 10 e versioni successive",
- "flighting": "Distribuzione di versioni di anteprima",
- "fotaUpdate": "Aggiornamento firmware in modalità over-the-air",
- "groupPolicy": "Modelli amministrativi",
- "groupPolicyAnalytics": "Analisi dei criteri di gruppo",
- "helpSupport": "Guida e supporto tecnico",
- "helpSupportReplacement": "Guida e supporto tecnico ({0})",
- "iOSAppProvisioning": "Profili di provisioning delle app iOS",
- "incompleteUserEnrollments": "Registrazioni utente incomplete",
- "iosUpdates": "Criteri di aggiornamento per iOS/iPadOS",
- "legacyPcManagement": "Gestione dei computer legacy",
- "macOSSoftwareUpdate": "Criteri di aggiornamento per macOS",
- "macOSSoftwareUpdateAccountSummaries": "Stato dell'installazione per dispositivi macOS",
- "macOSSoftwareUpdateCategorySummaries": "Riepilogo degli aggiornamenti software",
- "macOSSoftwareUpdateStateSummaries": "aggiornamenti",
- "managedGooglePlay": "Google Play gestito",
- "msfb": "Microsoft Store per le aziende",
- "myPermissions": "Autorizzazioni personali",
- "notifications": "Notifiche",
- "officeApps": "App di Office",
- "officeProPlusPolicies": "Criteri per le app di Office",
- "onPremise": "Locale",
- "onPremisesConnector": "Connettore locale per Exchange ActiveSync",
- "onPremisesDeviceAccess": "Dispositivi di Exchange ActiveSync",
- "onPremisesManageAccess": "Accesso locale a Exchange",
- "outOfDateIosDevices": "Errori di installazione per dispositivi iOS",
- "overview": "Panoramica",
- "partnerDeviceManagement": "Gestione dei dispositivi partner",
- "perUpdateRingDeploymentState": "Stato di distribuzione per ogni anello di aggiornamento",
- "permissions": "Autorizzazioni",
- "platformApps": "{0} app",
- "platformDevices": "{0} dispositivi",
- "platformEnrollment": "{0} registrazione",
- "policies": "Criteri",
- "profiles": "Profili",
- "properties": "Proprietà",
- "reports": "Report",
- "retireNoncompliantDevices": "Disattiva i dispositivi non conformi",
- "retireNoncompliantDevicesPreview": "Disattiva i dispositivi non conformi (anteprima)",
- "role": "Ruolo",
- "scriptManagement": "Script",
- "securityBaselines": "Baseline di sicurezza",
- "serviceToServiceConnector": "Exchange Online Connector",
- "servicenowConnector": "Connettore ServiceNow",
- "shellScripts": "Script della shell",
- "teamViewerConnector": "Connettore TeamViewer",
- "telecomeExpenseManagement": "Gestione delle spese per telecomunicazioni",
- "tenantAdmin": "Amministratore del tenant",
- "tenantAdministration": "Amministrazione del tenant",
- "termsAndConditions": "Condizioni",
- "titles": "Titoli",
- "troubleshoot": "Risoluzione dei problemi",
- "troubleshootSupport": "Risoluzione dei problemi e supporto tecnico",
- "user": "Utente",
- "userExecutionStatus": "Stato dell'utente",
- "wdacSupplementalPolicies": "Criteri supplementari per la modalità S",
- "win32CatalogUpdateApp": "Aggiornamenti per le app di Gestione app Enterprise",
- "win32CatalogUpdateAppInPreview": "Aggiornamenti (anteprima) per le app del catalogo di Windows (Win32)",
- "windows10DriverUpdate": "Aggiornamenti del driver per Windows 10 e versioni successive",
- "windows10QualityUpdate": "Aggiornamenti qualitativi per Windows 10 e versioni successive",
- "windows10UpdateRings": "Anelli di aggiornamento per Windows 10 e versioni successive",
- "windows10XPolicyFailures": "Errori dei criteri di Windows 10X",
- "windows365PartnerConnector": "Connettori partner di Windows 365",
- "windowsDiagnosticData": "Dati di Windows",
- "windowsEnterpriseCertificate": "Certificato Windows Enterprise",
- "windowsManagement": "Script",
- "windowsSideLoadingKeys": "Chiavi di sideload Windows",
- "windowsSymantecCertificate": "Certificato DigiCert Windows",
- "windowsThreatReport": "Stato dell'agente delle minacce"
- },
- "ScopeTypes": {
- "allDevices": "Tutti i dispositivi",
- "allUsers": "Tutti gli utenti",
- "allUsersAndDevices": "Tutti gli utenti e tutti i dispositivi",
- "selectedGroups": "Gruppi selezionati"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search come predefinito",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype for Business",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone e iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Non supportato",
+ "supportEnding": "Fine supporto",
+ "supported": "Supportato"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Predefinito",
- "header": "Priorità di aggiornamento",
- "postponed": "Posticipata",
- "priority": "Priorità alta"
- },
- "AutoUpdateSupersededApps": {
- "label": "Aggiornamento automatico",
- "sublabel": "Se l'utente ha installato una o più app aggiunte in sostituzione dal Portale aziendale, richiedere l'installazione dell'app di sostituzione."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Sfondo",
- "displayText": "Download del contenuto in {0}",
- "foreground": "Primo piano",
- "header": "Priorità di ottimizzazione recapito"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Consenti all'utente di posporre la notifica di riavvio",
- "countdownDialog": "Selezionare quando visualizzare la finestra di dialogo per il conto alla rovescia prima del riavvio (minuti)",
- "durationInMinutes": "Periodo di tolleranza per il riavvio del dispositivo (minuti)",
- "snoozeDurationInMinutes": "Selezionare la durata della posposizione (minuti)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Fuso orario",
- "local": "Fuso orario del dispositivo",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Data e ora",
- "deadlineTimeColumnLabel": "Scadenza installazione",
- "deadlineTimeDatePickerErrorMessage": "La data selezionata deve essere successiva alla data di disponibilità",
- "deadlineTimeLabel": "Scadenza dell'installazione app",
- "defaultTime": "Appena possibile",
- "infoText": "Questa applicazione sarà disponibile immediatamente dopo la distribuzione, a meno che non si specifichi una data di disponibilità più avanti. Se si tratta di un'applicazione obbligatoria, è possibile specificare la scadenza per l'installazione.",
- "specificTime": "Data o ora specifiche",
- "startTimeColumnLabel": "Disponibilità",
- "startTimeDatePickerErrorMessage": "La data selezionata deve essere precedente alla data di scadenza",
- "startTimeLabel": "Disponibilità dell'app"
- },
- "restartGracePeriodHeader": "Periodo di tolleranza per il riavvio",
- "restartGracePeriodLabel": "Periodo di tolleranza per il riavvio del dispositivo",
- "summaryTitle": "Esperienza dell'utente finale"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "File o cartella come requisito selezionato.",
- "pathToolTip": "Percorso completo del file o della cartella da rilevare.",
- "property": "Proprietà",
- "valueToolTip": "Selezionare un valore per il requisito corrispondente al metodo di rilevamento selezionato. I requisiti relativi a data e ora devono essere immessi nel formato locale."
- },
- "GridColumns": {
- "pathOrScript": "Percorso/Script",
- "type": "Tipo"
- },
- "Registry": {
- "keyPath": "Percorso della chiave",
- "keyPathTooltip": "Percorso completo della voce del Registro di sistema contenente il valore come requisito.",
- "operator": "Operator",
- "operatorTooltip": "Selezionare l'operatore per il confronto.",
- "registryRequirement": "Requisito relativo alla chiave del Registro di sistema",
- "registryRequirementTooltip": "Selezionare il confronto per il requisito relativo alla chiave del Registro di sistema.",
- "valueName": "Nome valore",
- "valueNameTooltip": "Nome del valore del Registro di sistema obbligatorio."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Approva automaticamente tutti gli aggiornamenti del driver consigliati",
+ "manual": "Approva e distribuisci manualmente gli aggiornamenti del driver"
+ },
+ "BulkActions": {
+ "button": "Azioni in blocco"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Metodo di approvazione:"
},
- "RequirementTypeOptions": {
- "fileType": "File",
- "registry": "Registro",
- "script": "Script"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Booleano",
- "dateTime": "Data e ora",
- "float": "Virgola mobile",
- "integer": "Numero intero",
- "string": "Stringa",
- "version": "Versione"
- },
- "duplicateName": "Il nome {0} per lo script è già stato usato. Immettere un nome diverso.",
- "enforceSignatureCheck": "Imponi il controllo della firma degli script",
- "enforceSignatureCheckTooltip": "Selezionare 'Sì' per verificare che lo script sia firmato da un'entità di pubblicazione attendibile, in modo da consentire l'esecuzione dello script senza la visualizzazione di avvisi o richieste. Lo script verrà eseguito senza essere bloccato. Selezionare 'No' (impostazione predefinita) per eseguire lo script con la conferma dell'utente finale, ma senza la verifica della firma.",
- "loggedOnCredentials": "Esegui lo script con le credenziali dell'utente connesso",
- "loggedOnCredentialsTooltip": "Eseguire lo script usando le credenziali del dispositivo connesso.",
- "operatorTooltip": "Selezionare l'operatore per il confronto tra requisiti.",
- "requirementMethod": "Selezionare il tipo di dati di output",
- "requirementMethodTooltip": "Selezionare il tipo di dati usato durante la determinazione di un requisito di corrispondenza per il rilevamento.",
- "scriptContent": "Contenuto dello script",
- "scriptFile": "File di script",
- "scriptFileTooltip": "Selezionare uno script di PowerShell che rileverà la presenza dell'app sul client. Se l'app viene rilevata, il processo relativo ai requisiti fornirà un codice di uscita con valore 0 e scriverà un valore di stringa in STDOUT.",
- "scriptName": "Nome script",
- "value": "Valore",
- "valueTooltip": "Selezionare un valore per il requisito corrispondente al metodo di rilevamento selezionato. I requisiti relativi a data e ora devono essere immessi nel formato locale."
+ "DeploymentDeferralInDays": {
+ "label": "Rendi disponibili gli aggiornamenti dopo",
+ "units": "(giorni)",
+ "value": "{0} giorni"
+ },
+ "DriverAction": {
+ "header": "Seleziona un'azione di seguito.",
+ "label": "Azione driver",
+ "placeholder": "Seleziona un'azione"
},
- "bladeTitle": "Aggiungi una regola relativa ai requisiti",
- "createRequirementHeader": "Creare un requisito.",
- "header": "Configurare regole aggiuntive relative ai requisiti",
- "label": "Regole aggiuntive relative ai requisiti",
- "noRequirementsSelectedPlaceholder": "Non sono stati specificati requisiti.",
- "requirementType": "Tipo di requisito",
- "requirementTypeTooltip": "Scegliere il tipo di metodo di rilevamento usato per determinare la modalità di convalida di un requisito."
- },
- "architectures": "Architettura del sistema operativo",
- "architecturesTooltip": "Scegliere le architetture necessarie per installare l'app.",
- "bladeTitle": "Requisiti",
- "diskSpace": "Spazio su disco necessario (MB)",
- "diskSpaceTooltip": "Spazio su disco disponibile necessario nell'unità di sistema per installare l'app.",
- "header": "Specificare i requisiti che i dispositivi devono rispettare prima dell'installazione dell'app:",
- "maximumTextFieldValue": "Il valore non può essere maggiore di {0}.",
- "minimumCpuSpeed": "Velocità di CPU minima necessaria (MHz)",
- "minimumCpuSpeedTooltip": "Velocità di CPU minima necessaria per installare l'app.",
- "minimumLogicalProcessors": "Numero minimo di processori logici necessari",
- "minimumLogicalProcessorsTooltip": "Numero minimo di processori logici necessari per installare l'app.",
- "minimumOperatingSystem": "Sistema operativo minimo",
- "minimumOperatingSystemTooltip": "Selezionare il sistema operativo minimo necessario per installare l'app.",
- "minumumTextFieldValue": "Il valore deve essere almeno {0}.",
- "physicalMemory": "Memoria fisica necessaria (MB)",
- "physicalMemoryTooltip": "Memoria fisica (RAM) necessaria per installare l'app.",
- "selectorLabel": "Requisiti",
- "validNumber": "Immettere un numero valido."
- },
- "PolicySet": {
- "appManagement": "Gestione applicazioni",
- "assignments": "Assegnazioni",
- "basics": "Informazioni di base",
- "deviceEnrollment": "Registrazione del dispositivo",
- "deviceManagement": "Gestione dei dispositivi",
- "scopeTags": "Tag di ambito",
- "appConfigurationTitle": "Criteri di configurazione dell'app",
- "appProtectionTitle": "Criteri di protezione delle app",
- "appTitle": "App",
- "iOSAppProvisioningTitle": "Profili di provisioning delle app iOS",
- "deviceLimitRestrictionTitle": "Restrizioni sul limite di dispositivi",
- "deviceTypeRestrictionTitle": "Restrizioni dei tipi di dispositivo",
- "enrollmentStatusSettingTitle": "Pagine di stato della registrazione",
- "windowsAutopilotDeploymentProfileTitle": "Profili di distribuzione di Windows Autopilot",
- "deviceComplianceTitle": "Criteri di conformità del dispositivo",
- "deviceConfigurationTitle": "Profili di configurazione del dispositivo",
- "powershellScriptTitle": "Script di PowerShell"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Driver inclusi"
+ },
+ "SelectDrivers": {
+ "header": "Seleziona i driver da includere nell'azione in blocco"
+ },
+ "SelectDriversToInclude": {
+ "button": "Seleziona i driver da includere"
+ },
+ "SelectLessDrivers": {
+ "validation": "È possibile selezionare al massimo cento driver"
+ },
+ "SelectMoreDrivers": {
+ "validation": "È necessario selezionare almeno un driver"
+ },
+ "SelectedDrivers": {
+ "label": "Driver selezionati"
+ },
+ "availabilityDate": "Rendi disponibile in Windows Update",
+ "bladeTitle": "Aggiornamenti dei driver Windows 10 e versioni successive (anteprima)",
+ "lastSync": "Ultima sincronizzazione:",
+ "lastSyncDefaultText": "Raccolta di inventario iniziale in sospeso",
+ "loadError": "Il caricamento non è riuscito."
+ },
+ "DriverStatus": {
+ "approved": "Approvato",
+ "declined": "Rifiutato",
+ "export": "Esportazione dei driver consigliati",
+ "needsReview": "Verifica necessaria",
+ "paused": "Sospeso"
+ },
+ "DriversToReview": {
+ "text": "{0} da rivedere"
+ },
+ "Subtitle": {
+ "automatic": "Criterio di aggiornamento del driver con approvazione automatica",
+ "manual": "Criterio di aggiornamento del driver con approvazione manuale"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Consigliata",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrein",
- "countryNameZA": "Sudafrica",
- "countryNameJO": "Giordania",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Ceca, Repubblica",
- "countryNameLT": "Lituania",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hong Kong - R.A.S.",
- "countryNameGH": "Ghana",
- "countryNameSA": "Arabia Saudita",
- "countryNamePG": "Papua Nuova Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "India",
- "countryNameHN": "Honduras",
- "countryNameRO": "Romania",
- "countryNameKZ": "Kazakistan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Georgia",
- "countryNameTT": "Trinidad e Tobago",
- "countryNameMP": "Isole Marianne settentrionali",
- "countryNameMV": "Maldive",
- "countryNameFI": "Finlandia",
- "countryNameNO": "Norvegia",
- "countryNameEE": "Estonia",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Uzbekistan",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tagikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "Francia",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italia",
- "countryNameAZ": "Azerbaigian",
- "countryNameKG": "Kirghizistan",
- "countryNameWF": "Wallis e Futuna",
- "countryNameTL": "Timor Est",
- "countryNameFK": "Isole Falkland (Isole Malvine)",
- "countryNameGY": "Guyana",
- "countryNameSS": "Sudan del Sud",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Siria",
- "countryNameMD": "Moldova",
- "countryNameVC": "Saint Vincent e Grenadine",
- "countryNameID": "Indonesia",
- "countryNameRE": "Riunione",
- "countryNameER": "Eritrea",
- "countryNameMK": "Macedonia del Nord",
- "countryNameTG": "Togo",
- "countryNamePF": "Polinesia francese",
- "countryNameKY": "Isole Cayman",
- "countryNameIO": "Territorio britannico dell'Oceano Indiano",
- "countryNameRU": "Russia",
- "countryNameMA": "Marocco",
- "countryNameAU": "Australia",
- "countryNameBO": "Bolivia",
- "countryNameVA": "Santa Sede (Stato della Città del Vaticano)",
- "countryNameVG": "Isole Vergini Britanniche",
- "countryNameFM": "Micronesia",
- "countryNameAQ": "Antartide",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brasile",
- "countryNameIS": "Islanda",
- "countryNamePE": "Perù",
- "countryNameBG": "Bulgaria",
- "countryNamePR": "Portorico",
- "countryNameGI": "Gibilterra",
- "countryNameBS": "Bahamas",
- "countryNameJE": "Jersey",
- "countryNameMO": "RAS di Macao",
- "countryNameRW": "Ruanda",
- "countryNameAS": "Samoa americane",
- "countryNameBQ": "Bonaire, Sint Eustatius e Saba",
- "countryNameMF": "Saint Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "Nuova Caledonia",
- "countryNameAC": "Isola Ascensione",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladesh",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Canada",
- "countryNameSH": "Sant'Elena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolia",
- "countryNamePA": "Panama",
- "countryNameCM": "Camerun",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Giappone",
- "countryNameCY": "Cipro",
- "countryNameCD": "Repubblica democratica del Congo",
- "countryNameTN": "Tunisia",
- "countryNameTR": "Turchia",
- "countryNameWS": "Samoa",
- "countryNameSE": "Svezia",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Cambogia",
- "countryNamePL": "Polonia",
- "countryNameDZ": "Algeria",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominica",
- "countryNameEG": "Egitto",
- "countryNameGF": "Guyana francese",
- "countryNameNZ": "Nuova Zelanda",
- "countryNamePS": "Autorità Palestinese",
- "countryNameIL": "Israele",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Grecia",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauritania",
- "countryNameVI": "Isole Vergini Americane",
- "countryNameGQ": "Guinea Equatoriale",
- "countryNameMX": "Messico",
- "countryNameDJ": "Gibuti",
- "countryNameGN": "Guinea",
- "countryNameCN": "Cina",
- "countryNameMZ": "Mozambico",
- "countryNameBV": "Isola Bouvet",
- "countryNameNF": "Norfolk",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "Georgia del Sud e Sandwich Australi",
- "countryNameRS": "Serbia",
- "countryNameCC": "Isole Cocos (Keeling)",
- "countryNameNA": "Namibia",
- "countryNameDE": "Germania",
- "countryNameCG": "Repubblica del Congo",
- "countryNameKW": "Kuwait",
- "countryNameMH": "Marshall",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Bielorussia",
- "countryNameMY": "Malaysia",
- "countryNameST": "São Tomé e Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Ciad",
- "countryNameCX": "Isola Christmas",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bissau",
- "countryNameUA": "Ucraina",
- "countryNameCU": "Cuba",
- "countryNameCO": "Colombia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Croazia",
- "countryNameSC": "Seychelles",
- "countryNameNL": "Paesi Bassi",
- "countryNameUM": "Altre isole americane del Pacifico",
- "countryNameIM": "Isola di Man",
- "countryNameFJ": "Figi",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "Regno Unito",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovenia",
- "countryNameAM": "Armenia",
- "countryNameAR": "Argentina",
- "countryNamePM": "Saint-Pierre e Miquelon",
- "countryNameTF": "Terre Australi e Antartiche Francesi",
- "countryNameDO": "Dominicana, Repubblica",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinica",
- "countryNamePT": "Portogallo",
- "countryNameCF": "Repubblica Centrafricana",
- "countryNameBE": "Belgio",
- "countryNameKM": "Comore",
- "countryNameLY": "Libia",
- "countryNameIE": "Irlanda",
- "countryNameKP": "Corea del Nord",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slovacchia",
- "countryNameTC": "Isole Turks e Caicos",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Yemen",
- "countryNameBA": "Bosnia ed Erzegovina",
- "countryNameGP": "Guadalupa",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Cile",
- "countryNameIQ": "Iraq",
- "countryNameSJ": "Svalbard e Isola Jan Mayen",
- "countryNameAX": "Isole Åland",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Fær Øer",
- "countryNameBL": "Saint-Barthélemy",
- "countryNameLB": "Libano",
- "countryNameJM": "Giamaica",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Spagna",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapore",
- "countryNameAL": "Albania",
- "countryNameSN": "Senegal",
- "countryNameSZ": "eSwatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d'Ivoire (Costa d'Avorio)",
- "countryNameTW": "Taiwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Isole Cook",
- "countryNameTH": "Thailandia",
- "countryNameHM": "Heard e McDonald",
- "countryNameGD": "Grenada",
- "countryNameUS": "Stati Uniti",
- "countryNameAT": "Austria",
- "countryNameKR": "Repubblica di Corea",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Danimarca",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Etiopia",
- "countryNameMG": "Madagascar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Lussemburgo",
- "countryNameQA": "Qatar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Isole Salomone",
- "countryNameAE": "Emirati Arabi Uniti",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua e Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Ungheria",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Svizzera",
- "countryNamePN": "Isole Pitcairn",
- "countryNameGL": "Groenlandia",
- "countryNamePH": "Filippine",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts e Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Lettonia",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "Non è possibile eseguire la sincronizzazione {0}",
+ "failureDescription": "Si è verificato un errore e non è stato possibile completare la sincronizzazione richiesta. Riprovare.",
+ "pending": "{0} La sincronizzazione è in corso",
+ "pendingDescription": "Sono stati recuperati i dati più recenti. Questo processo può richiedere alcuni minuti.",
+ "success": "La sincronizzazione {0} è stata completata",
+ "successDescription": "Sincronizzazione con il servizio WUfB completata alle {0}"
+ },
+ "SyncSpinner": {
+ "text": "È in corso una sincronizzazione. L'operazione potrebbe richiedere alcuni minuti. Cercare un avviso o riprovare tra qualche minuto."
+ },
+ "TabName": {
+ "basics": "Informazioni di base",
+ "driverUpdateSettings": "Impostazioni",
+ "otherDrivers": "Altri driver",
+ "properties": "Proprietà",
+ "recommendedDrivers": "Driver consigliati"
+ },
+ "driverAddFilter": "Aggiungi filtro",
+ "driverApplicableDevices": "Dispositivi applicabili",
+ "driverApprovalStatus": "Stato",
+ "driverBulkActions": "Azioni in blocco",
+ "driverClass": "Classe driver",
+ "driverCount": "Visualizzazione dei record da {0} a {1} su {2} record",
+ "driverFilterNoneSelected": "Nessuna selezione",
+ "driverManufacturer": "Produttore",
+ "driverName": "Nome del driver",
+ "driverNameLower": "distribuzione aggiornamenti driver windows",
+ "driverNameUpper": "distribuzione aggiornamenti driver Windows",
+ "driverRefresh": "Aggiorna",
+ "driverReleaseDate": "Data di rilascio",
+ "driverSearch": "Cerca",
+ "driverSearchKeyword": "Immettere la parola chiave di ricerca",
+ "driverVersion": "Versione",
+ "firstDeploymentDate": "Prima distribuzione",
+ "infoBoxText": "L'inventario può richiedere fino a 24 ore per la compilazione dopo aver assegnato e creato un criterio.",
+ "textBlockText": "Selezionare l'approvazione dei criteri e le impostazioni di distribuzione. Scegliere di configurare un criterio per approvare e distribuire gli aggiornamenti automaticamente o manualmente. Il metodo di approvazione non può essere modificato dopo la creazione di un criterio, ma le modifiche alle approvazioni individuali dei driver e ai dettagli della distribuzione saranno possibili una volta compilato un inventario per i dispositivi assegnati."
+ },
+ "TACSettings": {
+ "edgeSettings": "Impostazioni di configurazione di Microsoft Edge",
+ "edgeWindowsDataProtectionSettings": "Impostazioni di protezione dei dati di Microsoft Edge (Windows) - Anteprima",
+ "edgeWindowsSettings": "Impostazioni di configurazione di Microsoft Edge (Windows) - Anteprima",
+ "generalAppConfig": "Configurazione generale dell'app",
+ "generalSettings": "Impostazioni di configurazione generali",
+ "outlookSMIMEConfig": "Impostazioni di S/MIME per Outlook",
+ "outlookSettings": "Impostazioni di configurazione di Outlook",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-ja.json b/Documentation/Strings-ja.json
index c66bccc..5aa7edf 100644
--- a/Documentation/Strings-ja.json
+++ b/Documentation/Strings-ja.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "データ保護の構成"
- },
- "OrganizeMailByThread": {
- "title": "スレッド別にメールを整理",
- "tooltip": "Outlook の既定の動作では、電子メールの会話がスレッド形式の会話ビューにまとめられます。この設定を無効にすると、Outlook で各メールが個別に表示され、スレッドごとにグループ化されません。"
- },
- "Sync": {
- "header": "連絡先フィールドをネイティブの連絡先アプリの構成に同期"
- },
- "allowBiometricsAllowUserChangeTooltip": "ユーザーに設定の変更を許可するかどうかを指定します。",
- "allowBiometricsTitle": "アプリへのアクセスに生体認証が必要",
- "allowBiometricsTooltip": "TouchID や FaceID などの生体認証を、デバイス上のアプリにアクセスするためにユーザーに求めることができます。必要に応じて、このプロファイルで選択した認証方法に加えて、生体認証が使用されます。Intune App Protection ポリシーが展開されている場合は、この設定を有効にしないでください。App Protection ポリシーには管理対象データへのアクセスに先立つアクセス要件が含まれているためです。両方を有効にすると、Outlook Mobile にアクセスするためのアクセス プロンプトが複数表示されます。設定が未構成の場合、既定のアプリ設定は [オフ] になっています。",
- "allowCalendarNotificationsAllowUserChangeTooltip": "ユーザーに設定の変更を許可するかどうかを指定します。",
- "allowCalendarNotificationsTitle": "予定表の通知",
- "allowCalendarNotificationsTooltip": "[アプリ保護ポリシー] 設定の [組織データの通知] が [組織データをブロック] に設定されている場合、予定表の通知に詳細をすべて表示することを許可します。",
- "allowDefaultAppSignatureTitle": "既定のアプリ署名",
- "allowDefaultAppSignatureTooltip": "既定のアプリ署名は、アプリでメッセージを作成する時に、既定の署名に「Outlook for iOS の入手」を使用するかどうかを示すものです。設定がオフに構成されている場合、既定の署名は使用されませんが、ユーザー独自の署名を追加することができます。[未構成] に設定すると、既定のアプリ設定が [オン] になります。",
- "allowExternalRecipientsMailTipTitle": "外部受信者のメール ヒント",
- "allowExternalRecipientsMailTipTooltip": "外部受信者のメール ヒントは、送信者が外部の受信者を追加したり、外部受信者が含まれる配布グループを追加したりする場合に表示されます。このメール ヒントでは、作成したメッセージが組織外に送られるかどうかを送信者に通知するので、表現、口調、内容に関して適切な判断を下すのに役立ちます。利用できるのは、ハイブリッド先進認証を使用する Exchange Online アカウントおよびオンプレミスのアカウントのみです。設定で構成しない場合、既定のアプリ設定はオンになります。",
- "allowFocusedInboxTitle": "優先受信トレイ",
- "allowFocusedInboxTooltip": "優先受信トレイは、受信トレイを [優先] と [その他] の二つのタブに分けます。最も重要な電子メールは [優先] タブに入ります。残りの電子メールには引き続き簡単にアクセスできますが、[その他] タブに入ります。設定が未構成の場合、既定のアプリ設定は [オン] になっています。",
- "allowMailNotificationsAllowUserChangeTooltip": "ユーザーに設定の変更を許可するかどうかを指定します。",
- "allowMailNotificationsTitle": "メール通知",
- "allowMailNotificationsTooltip": "この値は、Outlook でメール通知を許可するかどうかを指定します。値を [いいえ] に設定すると、メール通知が無効になります。",
- "allowOrgDataOnWearablesTitle": "ウェアラブルでの組織のデータ",
- "allowOrgDataOnWearablesTooltip": "この値は、Outlook データをウェアラブル デバイスに同期できるかどうかを指定します。値を [いいえ] に設定すると、ウェアラブル同期が無効になります。",
- "allowSaveContactsAllowUserChangeTooltip": "連絡先の同期設定の変更をユーザーに許可するかどうかを指定します。",
- "allowSaveContactsTitle": "連絡先を保存する",
- "allowSaveContactsTooltip": "連絡先をモバイル デバイスのネイティブ アドレス帳に保存すると、新しい通話とテキスト メッセージを、ユーザーの既存の Outlook 連絡先にリンクすることができます。設定で構成しない場合、既定のアプリ設定はオフになります。",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "ユーザーに設定の変更を許可するかどうかを指定します。",
- "allowSmartReplyTitle": "返信の提案",
- "allowSmartReplyTooltip": "Outlook でメッセージを開くと、メッセージの下に返信が提案される場合があります。提案された返信を選択した場合、送信前に返信を編集できます。設定が未構成の場合、既定のアプリ設定は [オン] になっています。",
- "allowUserChangeGeneralToolTip": "ユーザーに設定の変更を許可するかどうかを指定します。",
- "allowUserChangeTitle": "ユーザーに設定の変更を許可する",
- "blockExternalImagesAllowUserChangeTooltip": "ユーザーに設定の変更を許可するかどうかを指定します。",
- "blockExternalImagesTitle": "外部画像をブロックする",
- "blockExternalImagesTooltip": "外部画像のブロックを有効にすると、アプリではメッセージの本文に埋め込まれている、インターネット上でホストされた画像がダウンロードされません。設定が未構成の場合、既定のアプリ設定は [オフ] になっています。",
- "disableAddinsTitle": "アドインを許可する",
- "disableAddinsTooltip": "既定では、アプリ保護ポリシーを使用すると、ユーザーはサードパーティのアドインを利用できますが、[ネイティブ アプリまたはアドインとアプリ のマネージド データを同期する] 設定を使用してアドインをブロックできます。アプリ保護ポリシー設定が [許可] に設定されている場合にこの設定を [オフ] に構成すると、アドインがブロックされます。",
- "discoverFeedTitle": "Discover フィード",
- "discoverFeedTooltip": "Discover フィードは、最も頻繁にアクセスされている Office ファイルを明らかにします。既定では、Delve がユーザーに対して有効になっているときに、このフィードが有効になります。未構成として設定した場合、既定のアプリ設定はオンに設定されます。",
- "enableSMIMETitle": "S/MIME を有効にする",
- "enableSMIMETooltip": "電子メールを作成するときに、S/MIME コントロールを有効にするかどうかを指定します",
- "encryptAllEmails": "すべてのメールを暗号化",
- "encryptAllEmailsAllowUserChangeTooltip": "ユーザーに [すべてのメールを暗号化] 設定の変更を許可するかどうかを指定します。",
- "encryptAllEmailsTooltip": "すべてのメールを暗号化する必要があるかどうかを指定します。暗号化すると、目的の受信者のみが読み取れるようにデータは暗号化テキストに変換されます。",
- "ldapUrl": "LDAP URL",
- "ldapUrlTooltip": "これは、クライアントがメール受信者の公開暗号化キーを取得できる LDAP ホスト名です。メールは、キーが使用可能な場合に暗号化されます。サポートされている形式: \r\n
\n",
- "label": "永続的なブラウザー セッション",
- "never": "永続的にしない"
- },
- "Warning": {
- "allApps": "永続的ブラウザー セッションは、[すべてのクラウド アプリ] が選択されている場合にのみ正しく動作します。クラウド アプリの選択を変更してください。詳細については、ここをクリックします。"
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "時間または日数",
- "value": "頻度"
- },
- "Option": {
- "Day": {
- "plural": "{0} 日",
- "singular": "1 日"
- },
- "Hour": {
- "plural": "{0} 時間",
- "singular": "1 時間"
- },
- "daysOption": "日間",
- "everytime": "毎回",
- "help": "リソースにアクセスを試みるユーザーが再びサインインを求められるようになるまでの期間。既定の設定は、90 日のローリング ウィンドウです。つまり、ユーザーが自分のマシンで非アクティブな状態が 90 日以上続くと、その後初めてリソースにアクセスを試みる時に再認証が求められます。",
- "hoursOption": "時間",
- "label": "サインインの頻度",
- "placeholder": "単位の選択"
- }
- },
- "mainOption": "セッションの有効期間の変更",
- "mainOptionHelp": "ユーザーにメッセージを表示する頻度と、ブラウザー セッションを永続的にするかどうかを構成します。先進認証プロトコルがサポートされていないアプリケーションではこのポリシーが無視される可能性があります。その場合、アプリケーション開発者にお問い合わせください。"
- },
- "SingleSelectorActive": {
- "failed": "このデータを読み込めません。",
- "reattempt": "データを読み込んでいます。{1} 個中 {0} 個を再試行します。"
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "ディレクトリ ロールの選択"
- },
- "Excluded": {
- "gridAria": "除外されたユーザーの一覧"
- },
- "Included": {
- "gridAria": "含められたユーザーの一覧"
- },
- "Validation": {
- "customRoleIncluded": "\"ディレクトリ ロール\" には、少なくとも 1 つのカスタム ロールが含まれています",
- "customRoleSelected": "少なくとも 1 つのカスタム ロールが選択されています",
- "failed": "\"{0}\" を構成する必要があります",
- "roles": "少なくとも 1 つのロールを選択します",
- "usersGroups": "少なくとも 1 人のユーザーか 1 つのグループを選択します"
- },
- "learnMore": "ユーザーとグループ、ワークロード ID、ディレクトリ ロール、外部ゲストなど、ポリシーを適用するユーザーに基づいてアクセスを制御します。"
- },
- "advancedTabText": "詳細設定",
- "allCloudAppsErrorBox": "\"パスワードの変更が必要\" 許可が選択されている場合は、\"すべてのクラウド アプリ\" を選択する必要があります",
- "allCloudAppsReauth": "[サインインの頻度 (毎回)] セッション制御と [サインイン リスク] 条件が選択されている場合は、[すべてのクラウド アプリ] を選択する必要があります",
- "allCloudOrSpecificApps": "[サインインの頻度 (毎回)] セッション コントロールでは、[すべてのクラウド アプリ] または特にサポートされているアプリを選択する必要があります",
- "allDayCheckboxLabel": "終日",
- "allDevicePlatforms": "任意のデバイス",
- "allGuestUserInfoContent": "Microsoft Entra B2B のゲストは含まれますが、SharePoint B2B のゲストは含まれません",
- "allGuestUserLabel": "すべてのゲストと外部ユーザー",
- "allRiskLevelsOption": "すべてのリスク レベル",
- "allTrustedLocationLabel": "すべての信頼できる場所",
- "allUserGroupSetSelectorLabel": "すべてのユーザーとグループが選択済み",
- "allUsersReauth": "[サインインの頻度 (毎回)] セッション コントロールでは、[すべてのユーザー] を選択する必要があります",
- "allUsersString": "すべてのユーザー",
- "and": "{0}および{1}",
- "andWithGrouping": "({0}) および {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "任意のクラウド アプリ",
- "appContextOptionInfoContent": "要求された認証タグ",
- "appContextOptionLabel": "要求された認証タグ (プレビュー)",
- "appContextUriPlaceholder": "例: uri:contoso.com:level3",
- "appEnforceInfoBubble": "アプリで適用された制限は、クラウド アプリ内で管理者の追加構成が必要になる場合があります。この制限は、新しいセッションのみに適用されます。",
- "appNotSetSeletorLabel": "0 個のクラウド アプリが選択されました",
- "appReauthNotSupported": "このアプリは、\"サインインの頻度 (毎回)\" セッション制御をサポートしていません。",
- "applyConditionClientAppInfoBalloonContent": "特定のクライアント アプリにポリシーを適用するようクライアント アプリを構成します",
- "applyConditionDevicePlatformInfoBalloonContent": "特定のプラットフォームにポリシーを適用するようデバイス プラットフォームを構成します",
- "applyConditionDeviceStateInfoBalloonContent": "特定のデバイスの状態にポリシーを適用するようデバイスの状態を構成します",
- "applyConditionLocationInfoBalloonContent": "信頼できる/信頼できない場所にポリシーを適用するよう場所を構成します",
- "applyConditionSigninRiskInfoBalloonContent": "選択したリスク レベルにポリシーを適用するようサインイン リスクを構成します",
- "applyConditionUserRiskInfoBalloonContent": "選択したリスク レベルにポリシーを適用するようユーザー リスクを構成します",
- "applyConditonLabel": "構成",
- "ariaLabelPolicyDisabled": "ポリシーを無効にする",
- "ariaLabelPolicyEnabled": "ポリシーが有効です",
- "ariaLabelPolicyReportOnly": "ポリシーはレポート専用モードです",
- "blockAccess": "アクセスのブロック",
- "builtInDirectoryRoleLabel": "組み込みのディレクトリ ロール",
- "casCustomControlInfo": "Cloud App Security ポータルでカスタム ポリシーを構成する必要があります。このコントロールは、おすすめアプリですぐに機能し、どのアプリに対してもセルフ オンボーディングが可能です。両方のシナリオの詳細については、ここをクリックしてください。",
- "casInfoBubble": "このコントロールは、さまざまなクラウド アプリで使えます。",
- "casPreconfiguredControlInfo": "このコントロールは、おすすめアプリですぐに機能し、どのアプリに対してもセルフ オンボーディングが可能です。両方のシナリオの詳細については、ここをクリックしてください。",
- "cert64DownloadCol": "Base64 証明書のダウンロード",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "証明書のダウンロード",
- "certDurationCol": "有効期限",
- "certDurationStartCol": "有効期間の開始日",
- "certName": "VpnCert",
- "certainApps": "[多要素認証を要求する] と [パスワードの変更を要求する] の許可が選択されていない場合、[サインインの頻度 (毎回)] が有効になるのは特にサポートされているアプリのみです",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "アプリケーションの選択",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "選択したアプリケーション",
- "chooseApplicationsEmpty": "アプリケーションなし",
- "chooseApplicationsNone": "なし",
- "chooseApplicationsNoneFound": "\"{0}\" は見つかりませんでした。別の名前または ID を試してください。",
- "chooseApplicationsPlural": "{0}、他 {1} 個",
- "chooseApplicationsReAuthEverytimeInfo": "アプリをお探しですか? 一部のアプリケーションは、[再認証が必要 – 毎回] セッション制御では使用できません",
- "chooseApplicationsRemove": "削除",
- "chooseApplicationsReturnedPlural": "{0} 個のアプリケーションが見つかりました",
- "chooseApplicationsReturnedSingular": "1 個のアプリケーションが見つかりました",
- "chooseApplicationsSearchBalloon": "名前または ID を入力して、アプリケーションを検索します。",
- "chooseApplicationsSearchHint": "アプリケーションの検索...",
- "chooseApplicationsSearchLabel": "アプリケーション",
- "chooseApplicationsSearching": "検索中...",
- "chooseApplicationsSelect": "選択",
- "chooseApplicationsSelected": "選択済み",
- "chooseApplicationsSingular": "{0}、他 1 個",
- "chooseApplicationsTooMany": "結果が多すぎて表示できません。検索ボックスを使用してフィルター処理してください。",
- "chooseLocationCorpnetItem": "企業ネットワーク",
- "chooseLocationSelectedLocationsLabel": "選択された場所",
- "chooseLocationTrustedIpsItem": "多要素認証の信頼済み IP",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "場所の選択",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "選択された場所",
- "chooseLocationsEmpty": "場所がありません",
- "chooseLocationsExcludedSelectorTitle": "選択",
- "chooseLocationsIncludedSelectorTitle": "選択",
- "chooseLocationsNone": "なし",
- "chooseLocationsNoneFound": "\"{0}\" は見つかりませんでした。別の名前または ID を試してください。",
- "chooseLocationsPlural": "{0}、他 {1} 個",
- "chooseLocationsRemove": "削除",
- "chooseLocationsReturnedPlural": "{0} 個の場所が見つかりました",
- "chooseLocationsReturnedSingular": "1 つの場所が見つかりました",
- "chooseLocationsSearchBalloon": "名前を入力して、場所を検索します。",
- "chooseLocationsSearchHint": "場所の検索...",
- "chooseLocationsSearchLabel": "場所",
- "chooseLocationsSearching": "検索中...",
- "chooseLocationsSelect": "選択",
- "chooseLocationsSelected": "選択",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "選択",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "選択",
- "chooseLocationsSingular": "{0}、他 1 個",
- "chooseLocationsTooMany": "結果が多すぎて表示できません。検索ボックスを使用してフィルター処理してください。",
- "claimProviderAddCommandText": "新しいカスタム コントロール",
- "claimProviderAddNewBladeTitle": "新しいカスタム コントロール",
- "claimProviderDeleteCommand": "削除",
- "claimProviderDeleteDescription": "'{0}' を削除しますか? この操作は元に戻すことができません。",
- "claimProviderDeleteTitle": "よろしいですか?",
- "claimProviderEditInfoText": "クレーム プロバイダーによって指定された、カスタマイズされたコントロールの JSON を入力します。",
- "claimProviderNotificationCreateDescription": "'{0}' という名前のカスタム コントロールを作成しています",
- "claimProviderNotificationCreateFailedDescription": "カスタム コントロール '{0}' の作成に失敗しました。後でもう一度やり直してください。",
- "claimProviderNotificationCreateFailedTitle": "カスタム コントロールを作成できませんでした",
- "claimProviderNotificationCreateSuccessDescription": "'{0}' という名前のカスタム コントロールが作成されました",
- "claimProviderNotificationCreateSuccessTitle": "'{0}' を作成しました",
- "claimProviderNotificationCreateTitle": "'{0}' を作成しています",
- "claimProviderNotificationDeleteDescription": "'{0}' という名前のカスタム コントロールを削除しています",
- "claimProviderNotificationDeleteFailedDescription": "カスタム コントロール '{0}' の削除に失敗しました。後でもう一度やり直してください。",
- "claimProviderNotificationDeleteFailedTitle": "カスタム コントロールを削除できませんでした",
- "claimProviderNotificationDeleteSuccessDescription": "'{0}' という名前のカスタム コントロールが削除されました",
- "claimProviderNotificationDeleteSuccessTitle": "'{0}' を削除しました",
- "claimProviderNotificationDeleteTitle": "'{0}' を削除しています",
- "claimProviderNotificationUpdateDescription": "'{0}' という名前のカスタム コントロールを更新しています",
- "claimProviderNotificationUpdateFailedDescription": "カスタム コントロール '{0}' の更新に失敗しました。後でもう一度やり直してください。",
- "claimProviderNotificationUpdateFailedTitle": "カスタム コントロールを更新できませんでした",
- "claimProviderNotificationUpdateSuccessDescription": "'{0}' という名前のカスタム コントロールが更新されました",
- "claimProviderNotificationUpdateSuccessTitle": "'{0}' を更新しました",
- "claimProviderNotificationUpdateTitle": "'{0}' を更新しています",
- "claimProviderValidationAppIdInvalid": "\"AppId\" 値が無効です。確認して、もう一度やり直してください。",
- "claimProviderValidationClientIdMissing": "データに \"ClientId\" 値がありません。確認して、もう一度やり直してください。",
- "claimProviderValidationControlClaimsRequestedMissing": "\"Control\" に \"ClaimsRequested\" 値がありません。確認して、もう一度やり直してください。",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "\"ClaimsRequested\" 項目に \"Type\" 値がありません。確認して、もう一度やり直してください。",
- "claimProviderValidationControlIdAlreadyExists": "\"Control\" の \"Id\" 値は既に存在します。確認して、もう一度やり直してください。",
- "claimProviderValidationControlIdMissing": "\"Control\" に \"Id\" 値がありません。確認して、もう一度やり直してください。",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "\"Control\" の \"Id\" 値は、既存のポリシー内で参照されているため、削除できません。最初に、その値をポリシーから削除してください。",
- "claimProviderValidationControlIdTooManyControls": "\"Control\" プロパティに含まれるコントロールが多すぎます。確認し、もう一度やり直してください。",
- "claimProviderValidationControlIdValueReserved": "\"Control\" の \"Id\" 値は予約済みキーワードです。別の ID を使用してください。",
- "claimProviderValidationControlNameAlreadyExists": "\"Control\" の \"Name\" 値は既に存在します。確認して、もう一度やり直してください。",
- "claimProviderValidationControlNameMissing": "\"Control\" に \"Name\" 値がありません。確認して、もう一度やり直してください。",
- "claimProviderValidationControlsMissing": "データに \"Controls\" 値がありません。確認して、もう一度やり直してください。",
- "claimProviderValidationDiscoveryUrlMissing": "データに \"DiscoveryUrl\" 値がありません。確認して、もう一度やり直してください。",
- "claimProviderValidationInvalid": "指定されたデータが無効です。確認して、もう一度やり直してください。",
- "claimProviderValidationInvalidJsonDefinition": "カスタム コントロールを保存できません。JSON テキストを確認して、もう一度やり直してください。",
- "claimProviderValidationNameAlreadyExists": "\"Name\" 値は既に存在します。確認して、もう一度やり直してください。",
- "claimProviderValidationNameMissing": "データに \"Name\" 値がありません。確認して、もう一度やり直してください。",
- "claimProviderValidationUnknown": "指定されたデータの検証中に不明なエラーが発生しました。確認して、もう一度やり直してください。",
- "claimProvidersNone": "カスタム コントロールがありません",
- "claimProvidersSearchPlaceholder": "コントロールを検索します。",
- "classicPoilcyFilterTitle": "表示",
- "classicPolicyAllPlatforms": "すべてのプラットフォーム",
- "classicPolicyClientAppBrowserAndNative": "ブラウザー、モバイル アプリ、デスクトップの各クライアント",
- "classicPolicyCloudAppTitle": "クラウド アプリケーション",
- "classicPolicyControlAllow": "許可",
- "classicPolicyControlBlock": "ブロック",
- "classicPolicyControlBlockWhenNotAtWork": "社外ネットワークからの利用は、禁止する",
- "classicPolicyControlRequireCompliantDevice": "準拠しているデバイスが必要です",
- "classicPolicyControlRequireDomainJoinedDevice": "ドメインに参加しているデバイスが必要です",
- "classicPolicyControlRequireMfa": "多要素認証を要求する",
- "classicPolicyControlRequireMfaWhenNotAtWork": "社外ネットワークからの利用は、多要素認証を要求する",
- "classicPolicyDeleteCommand": "削除",
- "classicPolicyDeleteFailTitle": "クラシック ポリシーを削除できませんでした",
- "classicPolicyDeleteInProgressTitle": "クラシック ポリシーを削除しています",
- "classicPolicyDeleteSuccessTitle": "クラシック ポリシーが削除されました",
- "classicPolicyDetailBladeTitle": "詳細",
- "classicPolicyDisableCommand": "無効",
- "classicPolicyDisableConfirmation": "'{0}' を無効にしますか? この操作は元に戻すことができません。",
- "classicPolicyDisableFailDescription": "'{0}' を無効にできませんでした",
- "classicPolicyDisableFailTitle": "クラシック ポリシーを無効にできませんでした",
- "classicPolicyDisableInProgressDescription": "'{0}' を無効にしています",
- "classicPolicyDisableInProgressTitle": "クラシック ポリシーを無効にしています",
- "classicPolicyDisableSuccessDescription": "'{0}' が正常に無効化されました",
- "classicPolicyDisableSuccessTitle": "クラシック ポリシーが無効化されました",
- "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync サポート対象プラットフォーム",
- "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync サポート対象外プラットフォーム",
- "classicPolicyExcludedPlatformsTitle": "除外されているデバイス プラットフォーム",
- "classicPolicyFilterAll": "すべてのポリシー",
- "classicPolicyFilterDisabled": "無効なポリシー",
- "classicPolicyFilterEnabled": "有効なポリシー",
- "classicPolicyIncludeExcludeMembersDescription": "グループを除外することで、ポリシーの段階的な移行を実行できます。",
- "classicPolicyIncludeExcludeMembersTitle": "グループの包含/除外",
- "classicPolicyIncludedPlatformsTitle": "含められるデバイス プラットフォーム",
- "classicPolicyManualMigrationMessage": "このポリシーは、手動で移行する必要があります。",
- "classicPolicyMigrateCommand": "移行",
- "classicPolicyMigrateConfirmation": "'{0}' を移行しますか? このポリシーは、1 回だけ移行できます。",
- "classicPolicyMigrateFailDescription": "'{0}' を移行できませんでした",
- "classicPolicyMigrateFailTitle": "クラシック ポリシーを移行できませんでした",
- "classicPolicyMigrateInProgressDescription": "'{0}' を移行しています",
- "classicPolicyMigrateInProgressTitle": "クラシック ポリシーを移行しています",
- "classicPolicyMigrateRecommendText": "推奨: 新しい Azure Portal ポリシーに移行してください。",
- "classicPolicyMigrateSuccessTitle": "クラシック ポリシーが正常に移行されました",
- "classicPolicyMigratedSuccessDescription": "このクラシック ポリシーは、[ポリシー] の下で管理できるようになりました。",
- "classicPolicyMigratedSuccessDescriptionMultiple": "このクラシック ポリシーは、{0} 個の新しいポリシーとして移行されます。新しいポリシーは、[ポリシー] の下で管理できます。",
- "classicPolicyNoEditPermissionMsg": "このポリシーを編集するアクセス許可がありません。グローバル管理者およびセキュリティ管理者のみがポリシーを編集できます。詳細についてはここをクリックしてください。",
- "classicPolicySaveFailDescription": "'{0}' を保存できませんでした",
- "classicPolicySaveFailTitle": "クラシック ポリシーを保存できませんでした",
- "classicPolicySaveInProgressDescription": "'{0}' を保存しています",
- "classicPolicySaveInProgressTitle": "クラシック ポリシーを保存しています",
- "classicPolicySaveSuccessDescription": "'{0}' が正常に保存されました",
- "classicPolicySaveSuccessTitle": "クラシック ポリシーが保存されました",
- "clientAppBladeLegacyInfoBanner": "レガシー認証は現在サポートされていません",
- "clientAppBladeLegacyUpsellBanner": "サポートされていないクライアント アプリをブロックする (プレビュー)",
- "clientAppBladeTitle": "クライアント アプリ",
- "clientAppDescription": "このポリシーを適用するクライアント アプリを選択します",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync は、現在、その他すべての条件をサポートしていません",
- "clientAppLearnMore": "最新の認証を使用しない特定のクライアント アプリケーションを対象とするようユーザー アクセスを制御します。",
- "clientAppLegacyHeader": "レガシ認証クライアント",
- "clientAppMobileDesktop": "モバイル アプリとデスクトップ クライアント",
- "clientAppModernHeader": "先進認証クライアント",
- "clientAppOnlySupportedPlatforms": "サポートされているプラットフォームのみにポリシーを適用する",
- "clientAppSelectSpecificClientApps": "クライアント アプリの選択",
- "clientAppWebBrowser": "ブラウザー",
- "clientAppsSelectedLabel": "{0} 件を含む",
- "clientTypeBrowser": "ブラウザー",
- "clientTypeEas": "Exchange ActiveSync クライアント",
- "clientTypeEasInfo": "レガシ認証のみを使用する Exchange ActiveSync クライアント。",
- "clientTypeModernAuth": "先進認証クライアント",
- "clientTypeOtherClients": "他のクライアント",
- "clientTypeOtherClientsInfo": "これには、古い Office クライアントとその他のメール プロトコル (POP、IMAP、SMTP など) が含まれます。[詳細情報][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "このポリシーで構成されている {0} 個のクラウド アプリがディレクトリから削除されましたが、このポリシーの他のアプリには影響ありません。ポリシーのアプリケーション セクションを次回更新するときに、削除されたアプリは自動的に削除されます。",
- "cloudAppsSelectionBladeAllMicrosoftApps": "すべての Microsoft アプリ",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Microsoft のクラウド アプリ、デスクトップ アプリ、モバイル アプリを許可する (プレビュー)",
- "cloudappsSelectionBladeAllCloudapps": "すべてのクラウド アプリ",
- "cloudappsSelectionBladeExcludeDescription": "ポリシーから除外するクラウド アプリを選択します",
- "cloudappsSelectionBladeExcludedSelectorTitle": "除外されたクラウド アプリの選択",
- "cloudappsSelectionBladeIncludeDescription": "このポリシーが適用されるクラウド アプリを選択します",
- "cloudappsSelectionBladeIncludedSelectorTitle": "選択",
- "cloudappsSelectionBladeSelectedCloudapps": "アプリを選択",
- "cloudappsSelectorInfoBallonText": "ユーザーが作業のためにアクセスするサービス。例: 'Salesforce'",
- "cloudappsSelectorPluralExcluded": "{0} 個のアプリが除外されました",
- "cloudappsSelectorPluralIncluded": "{0} 個のアプリが含められました",
- "cloudappsSelectorSingularExcluded": "1 個のアプリが除外されました",
- "cloudappsSelectorSingularIncluded": "1 個のアプリが含められました",
- "cloudappsSelectorUserPlural": "{0} 個のアプリ",
- "cloudappsSelectorUserSingular": "1 個のアプリ",
- "conditionLabelMulti": "{0} 個の条件が選択されました",
- "conditionLabelOne": "1 個の条件が選択されました",
- "conditionalAccessBladeTitle": "条件付きアクセス",
- "conditionsNotSelectedLabel": "未構成",
- "conditionsReqMfaReauthSet": "[多要素認証を要求する] 許可と [サインインの頻度 (毎回)] セッション制御が現在選択されているため、一部のオプションは使用できません",
- "conditionsReqPwSet": "\"パスワードの変更が必要\" 許可が現在選択されているため、一部のオプションは使用できません",
- "configureCasText": "Cloud App Security の構成",
- "configureCustomControlsText": "カスタム ポリシーの構成",
- "controlLabelMulti": "{0} 個のコントロールが選択されました",
- "controlLabelOne": "1 個のコントロールが選択されました",
- "controlValidatorText": "少なくとも 1 つのコントロールを選択してください",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "準拠しているデバイスの要求に関する詳細情報を表示します。",
- "controlsDeviceComplianceInfoBubble": "デバイスは Intune に準拠している必要があります。デバイスが準拠していない場合、ユーザーはデバイスを準拠した状態にするよう求められます。",
- "controlsDomainJoinedAriaLabel": "Microsoft Entra ハイブリッド参加済みデバイスの要求について詳細をご確認ください。",
- "controlsDomainJoinedInfoBubble": "デバイスは Microsoft Entra Hybrid 参加済みである必要があります。",
- "controlsMamAriaLabel": "承認済みのクライアント アプリケーションの要求に関する詳細情報を表示します。",
- "controlsMamInfoBubble": "デバイスは、これらの承認されたクライアント アプリケーションを使用する必要があります。",
- "controlsMfaInfoBubble": "ユーザーは、電話やテキスト メッセージなど、追加のセキュリティ要件を完了する必要があります",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "ポリシーで保護されたアプリの要求に関する詳細情報を表示します。",
- "controlsRequireCompliantAppInfoBubble": "デバイスでは、ポリシーで保護されたアプリを使用する必要があります。",
- "controlsRequirePasswordResetAriaLabel": "パスワード変更の要求に関する詳細情報を表示します。",
- "controlsRequirePasswordResetInfoBubble": "ユーザー リスクを軽減するために、パスワードを変更する必要があります。このオプションでは多要素認証も必要です。他のコントロールは使用できません。",
- "countriesRadiobuttonInfoBalloonContent": "サインインが行われている国/地域は、そのユーザーの IP アドレスで特定されます。",
- "createNewVpnCert": "新しい証明書",
- "createdTimeLabel": "作成時刻",
- "customRoleLabel": "カスタム ロール (サポートされていません)",
- "dateRangeTypeLabel": "期間",
- "daysOfWeekPlaceholderText": "曜日でフィルターしてください",
- "daysOfWeekTypeLabel": "曜日",
- "deletePolicyNoLicenseText": "このポリシーを今すぐ削除できます。削除すると、必要なライセンスを取得するまで、再作成することはできません。",
- "descriptionContentForControlsAndOr": "複数のコントロールの場合",
- "devicePlatform": "デバイス プラットフォーム",
- "devicePlatformConditionHelpDescription": "選択されたデバイス プラットフォームにポリシーを適用します。\n[詳細情報][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} 件を含む",
- "devicePlatformIncludeExclude": "{0} かつ {1} 件を除く",
- "devicePlatformNoSelectionError": "[デバイス プラットフォームの選択] では、1 つのサブ項目を選択する必要があります。",
- "devicePlatformsNone": "なし",
- "deviceSelectionBladeExcludeDescription": "ポリシーから除外するプラットフォームを選択します",
- "deviceSelectionBladeIncludeDescription": "このポリシーに含めるデバイス プラットフォームを選択します",
- "deviceStateAll": "すべてのデバイスの状態",
- "deviceStateCompliant": "デバイスは準拠としてマーク済み",
- "deviceStateCompliantInfoContent": "Intune に準拠しているデバイスはこのポリシーの評価から除外されるため、たとえばポリシーがアクセスをブロックする場合、Intune 準拠デバイスを除くすべてのデバイスがブロックされます。",
- "deviceStateConditionConfigureInfoContent": "デバイスの状態に基づいてポリシーを構成します",
- "deviceStateConditionSelectorInfoContent": "ユーザーがサインインしているデバイスが [Microsoft Entra Hybrid 参加済み] と [準拠としてマーク済み] のどちらであるかを示します。\n これは非推奨になりました。代わりに '{1}' をお使いください。",
- "deviceStateConditionSelectorLabel": "デバイスの状態 (非推奨)",
- "deviceStateDomainJoined": "Microsoft Entra Hybrid 参加済みのデバイス",
- "deviceStateDomainJoinedInfoContent": "Microsoft Entra Hybrid 参加済みのデバイスはこのポリシーの評価から除外されます。そのため、たとえばポリシーでアクセスがブロックされる場合は、Microsoft Entra Hybrid 参加済みのデバイスを除くすべてのデバイスがブロックされます。",
- "deviceStateDomainJoinedInfoLinkText": "詳細情報。",
- "deviceStateExcludeDescription": "ポリシーからデバイスを除外するために使用するデバイスの状態の条件を選択します。",
- "deviceStateIncludeAndExcludeOneLabel": "{0} を含め、{1} を除外する",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} を含め、{1}、{2} を除外する",
- "directoryRoleInfoContent": "組み込みのディレクトリ ロールにポリシーを割り当てます。",
- "directoryRolesLabel": "ディレクトリ ロール",
- "discardbutton": "破棄",
- "downloadDefaultFileName": "IP 範囲",
- "downloadExampleFileName": "例",
- "downloadExampleHeader": "これは、取得できるデータの種類のデモを含むサンプル ファイルです。# で始まる行は無視されます。",
- "duplicate": "重複",
- "duplicatePolicyName": "{0} のコピー",
- "endDatePickerLabel": "End",
- "endTimePickerLabel": "終了時刻",
- "enterCountryText": "IP アドレスと国/地域はペアで評価されます。国を選択してください。",
- "enterIpText": "IP アドレスと国/地域はペアで評価されます。IP アドレスを入力してください。",
- "enterUserText": "ユーザーが選択されていません。ユーザーを選択してください。",
- "evaluationResult": "評価の結果",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync とサポートされているプラットフォームのみ",
- "excludeAllTrustedLocationSelectorText": "すべての信頼できる場所",
- "featureRequiresP2": "この機能には Microsoft Entra ID P2 ライセンスが必要です。",
- "friday": "金曜日",
- "grantControls": "制御の許可",
- "gridNetworkTrusted": "信頼されている",
- "gridPolicyCreatedDateTime": "作成日",
- "gridPolicyEnabled": "有効",
- "gridPolicyModifiedDateTime": "更新日",
- "gridPolicyName": "ポリシー名",
- "gridPolicyState": "状態",
- "groupSelectionBladeExcludeDescription": "ポリシーから除外するグループを選択します",
- "groupSelectionBladeExcludedSelectorTitle": "除外するグループの選択",
- "groupSelectionBladeSelect": "グループの選択",
- "groupSelectorInfoBallonText": "ポリシーが適用されるディレクトリ内のグループ。例: 'パイロット グループ'",
- "groupsSelectionBladeTitle": "グループ",
- "helpCommonScenariosText": "一般的なシナリオに関心がある場合",
- "helpCondition1": "ユーザーが会社のネットワーク外にいる場合",
- "helpCondition2": "'マネージャー' グループのユーザーがサインインする場合",
- "helpConditionsTitle": "条件",
- "helpControl1": "多要素認証を使用してサインインする必要があります",
- "helpControl2": "Intune に準拠しているデバイスまたはドメインに参加しているデバイスを使用している必要があります",
- "helpControlsTitle": "制御",
- "helpIntroText": "条件付きアクセスを使用すると、特定の条件が発生したときにアクセス要件を適用することができます。いくつかの例を見てみましょう",
- "helpIntroTitle": "条件付きアクセスとは",
- "helpLearnMoreText": "条件付きアクセスの詳細を確認するには",
- "helpStartStep1": "[+ 新しいポリシー] をクリックして最初のポリシーを作成します",
- "helpStartStep2": "ポリシーの条件と制御を指定します",
- "helpStartStep3": "完了したら、忘れずにポリシーを有効にして作成します",
- "helpStartTitle": "作業の開始",
- "highRisk": "高",
- "includeAndExcludeAppsTextFormat": "次が含まれます: {0}。次が含まれません: {1}。",
- "includeAppsTextFormat": "次が含まれます: {0}。",
- "includeUnknownAreasCheckboxInfoBalloonContent": "不明な領域は、国/地域にマップできない IP アドレスです。",
- "includeUnknownAreasCheckboxLabel": "不明な領域を含める",
- "infoCommandLabel": "情報",
- "invalidCertDuration": "証明書の有効期間が無効です",
- "invalidIpAddress": "値には有効な IP アドレスを指定する必要があります",
- "invalidReAuthSignInRiskOptionSelected": "\"サインインの頻度 毎回\" セッション コントロールでは、\"サインイン リスク\" 条件コントロールでの \"リスクなし\" の選択は許可されていません。",
- "invalidUriErrorMsg": "有効な URI を入力してください。例: 'uri:contoso.com:acr'",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "すべてを読み込む",
- "loading": "読み込み中...",
- "locationConfigureNamedLocationsText": "すべての信頼できる場所の構成",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "場所の名前が長すぎます。最大 256 文字です",
- "locationSelectionBladeExcludeDescription": "ポリシーから除外する場所を選択します",
- "locationSelectionBladeIncludeDescription": "このポリシーに含める場所を選択します",
- "locationsAllLocationsLabel": "すべての場所",
- "locationsAllNamedLocationsLabel": "すべての信頼済み IP",
- "locationsAllPrivateLinksLabel": "個人用テナント内のすべてのプライベート リンク",
- "locationsIncludeExcludeLabel": "{0}、すべての信頼済み IP を除外する",
- "locationsSelectedPrivateLinksLabel": "選択したプライベート リンク",
- "lowRisk": "低",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "条件付きアクセス ポリシーを管理するには、お客様の組織に Microsoft Entra ID P1 または P2 が必要です。",
- "manageSecurityDefaultsAriaLabel": "セキュリティの既定値群の設定の管理。",
- "markAsTrustedCheckboxInfoBalloonContent": "信頼できる場所からサインインすると、ユーザーのサインイン リスクが低くなります。入力した IP 範囲が確立され、組織内で信用されていることがわかる場合のみ、この場所を信頼できる場所とマークしてください。",
- "markAsTrustedCheckboxLabel": "信頼できる場所としてマークする",
- "mediumRisk": "中",
- "memberSelectionCommandRemove": "削除",
- "menuItemClaimProviderControls": "カスタム コントロール (プレビュー)",
- "menuItemClassicPolicies": "クラシック ポリシー",
- "menuItemInsightsAndReporting": "分析情報とレポート",
- "menuItemManage": "管理",
- "menuItemNamedLocationsPreview": "ネームド ロケーション (プレビュー)",
- "menuItemNamedNetworks": "ネームド ロケーション",
- "menuItemPolicies": "ポリシー",
- "menuItemTermsOfUse": "利用規約",
- "modifiedTimeLabel": "変更時刻",
- "monday": "月曜日",
- "nameLabel": "名前",
- "namedLocationCountryInfoBanner": "国または地域にマップされるのは IPv4 アドレスのみです。IPv6 アドレスが不明な国または地域に含まれています。",
- "namedLocationTypeCountry": "国/地域 ",
- "namedLocationTypeLabel": "次を使用して場所を定義します:",
- "namedLocationUpsellBanner": "このビューは非推奨になりました。強化された新しい [ネームド ロケーション] ビューに移動してください。",
- "namedLocationsHelpDescription": "ネームド ロケーションは、擬陽性を減らすために Microsoft Entra ID セキュリティ レポートで使用されるほか、Microsoft Entra 条件付きアクセス ポリシーでも使用されます。\n[詳細情報][1]\n[1]: https://learn.microsoft.com/ja-jp/azure/active-directory/conditional-access/location-condition#preview-features",
- "namedNetworkAddIpRanges": "新しい IP 範囲の追加 (例: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "少なくとも 1 つの国または地域を選択する必要があります。",
- "namedNetworkDeleteCommand": "削除",
- "namedNetworkDeleteDescription": "'{0}' を削除しますか? この操作は元に戻すことができません。",
- "namedNetworkDeleteTitle": "よろしいですか?",
- "namedNetworkDownloadIpRange": "ダウンロード",
- "namedNetworkInvalidRange": "値は有効な IP 範囲である必要があります。",
- "namedNetworkIpRangeNeeded": "有効な IP 範囲が 1 つ以上必要です",
- "namedNetworkIpRangesDescriptionContent": "組織の IP 範囲を構成します",
- "namedNetworkIpRangesTab": "IP 範囲",
- "namedNetworkListAdd": "新しい場所",
- "namedNetworkListConfigureTrustedIps": "多要素認証の信頼済み IP の構成",
- "namedNetworkNameDescription": "例: 'Redmond オフィス'",
- "namedNetworkNameInvalid": "指定された名前が無効です。",
- "namedNetworkNameRequired": "この場所に名前を指定する必要があります。",
- "namedNetworkNoIpRanges": "IP 範囲なし",
- "namedNetworkNotificationCreateDescription": "'{0}' という名前の場所を作成しています",
- "namedNetworkNotificationCreateFailedDescription": "場所 '{0}' の作成に失敗しました。後でもう一度試してください。",
- "namedNetworkNotificationCreateFailedTitle": "場所を作成できませんでした",
- "namedNetworkNotificationCreateSuccessDescription": "'{0}' という名前の場所を作成しました",
- "namedNetworkNotificationCreateSuccessTitle": "'{0}' を作成しました",
- "namedNetworkNotificationCreateTitle": "'{0}' を作成しています",
- "namedNetworkNotificationDeleteDescription": "'{0}' という名前の場所を削除しています",
- "namedNetworkNotificationDeleteFailedDescription": "場所 '{0}' の削除に失敗しました。後でもう一度試してください。",
- "namedNetworkNotificationDeleteFailedTitle": "場所を削除できませんでした",
- "namedNetworkNotificationDeleteSuccessDescription": "'{0}' という名前の場所を削除しました",
- "namedNetworkNotificationDeleteSuccessTitle": "'{0}' を削除しました",
- "namedNetworkNotificationDeleteTitle": "'{0}' を削除しています",
- "namedNetworkNotificationUpdateDescription": "'{0}' という名前の場所を更新しています",
- "namedNetworkNotificationUpdateFailedDescription": "場所 '{0}' の更新に失敗しました。後でもう一度試してください。",
- "namedNetworkNotificationUpdateFailedTitle": "場所を更新できませんでした",
- "namedNetworkNotificationUpdateSuccessDescription": "'{0}' という名前の場所を更新しました",
- "namedNetworkNotificationUpdateSuccessTitle": "'{0}' を更新しました",
- "namedNetworkNotificationUpdateTitle": "'{0}' を更新しています",
- "namedNetworkSearchPlaceholder": "場所を検索します。",
- "namedNetworkUploadFailedDescription": "指定されたファイルの解析でエラーが発生しました。各行が CIDR 形式のプレーンテキスト ファイルをアップロードするようにしてください。",
- "namedNetworkUploadFailedTitle": "'{0}' を解析できませんでした",
- "namedNetworkUploadInProgressDescription": "'{0}' から有効な CIDR 値を解析しようとしています。",
- "namedNetworkUploadInProgressTitle": "'{0}' を解析しています",
- "namedNetworkUploadInvalidDescription": "'{0}' が大きすぎるか、無効な形式です。",
- "namedNetworkUploadInvalidTitle": "'{0}' が無効です",
- "namedNetworkUploadIpRange": "アップロード",
- "namedNetworkUploadSuccessDescription": "{0} 行が分析されました。{1} 行は無効な形式です。{2} 行はスキップされました。",
- "namedNetworkUploadSuccessTitle": "'{0}' の解析が完了しました",
- "namedNetworksAdd": "新しいネームド ロケーション",
- "namedNetworksConditionHelpDescription": "物理的な場所に基づいてユーザー アクセスを制御します。\n[詳細][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} かつ {1} 件を除く",
- "namedNetworksHelpDescription": "ネームド ロケーションは、誤検知を減らすために Microsoft Entra ID セキュリティ レポートで使用されるほか、Microsoft Entra 条件付きアクセス ポリシーでも使用されます。\n[詳細情報][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} 件を含む",
- "namedNetworksNone": "ネームド ロケーションが見つかりません。",
- "namedNetworksTitle": "場所の構成",
- "namednetworkExceedingSizeErrorBladeTitle": "エラーの詳細",
- "namednetworkExceedingSizeErrorDetailText": "詳細については、ここをクリックしてください。",
- "namednetworkExceedingSizeErrorMessage": "ネームド ロケーションに許可されている最大ストレージを超えました。リストを短くしてもう一度試してください。ここをクリックすると、詳細が表示されます。",
- "needMfaSecondary": "[サインインの頻度 (毎回)] が [セカンダリ認証方法のみ] と一緒に選択されている場合は、[多要素認証を要求する] を選択する必要があります",
- "needMfaSpecificApps": "特別にサポートされているアプリが選択されている場合、[サインインの頻度 (毎回)] セッション制御には、[多要素認証を要求する] 許可制御が必要です",
- "newCertName": "新しい証明書",
- "noAttributePermissionsError": "ポリシーを作成または更新するための十分な特権がありません。動的フィルターを追加または編集するには、属性定義の閲覧者ロールが必要です。",
- "noPolicyRowMessage": "ポリシーがありません",
- "noSPSelected": "サービス プリンシパルが選択されていません",
- "noUpdatePermissionMessage": "この設定を更新するアクセス許可がありません。アクセスするにはグローバル管理者にお問い合わせください。",
- "noUserSelected": "ユーザーが選択されていません",
- "noneRisk": "リスクなし",
- "office365Description": "これらのアプリには、Microsoft Flow、Microsoft Forms、Microsoft Teams、Office 365 Exchange Online、Office 365 SharePoint Online、Office 365 Yammer などが含まれます。",
- "office365InfoBox": "選択したアプリのうち少なくとも 1 つは Office 365 の一部です。代わりに、Office 365 アプリでポリシーを設定することをお勧めします。",
- "oneUserSelected": "1 人のユーザーが選ばれています",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "このポリシーを保存できるのは、全体管理者のみです。",
- "or": "{0}または{1}",
- "pickerDoneCommand": "完了",
- "policiesBladeAdPremiumUpsellBannerText": "Microsoft Entra ID Premium で独自のポリシーを作成して、[クラウド アプリ]、[サインイン リスク]、[デバイス プラットフォーム] などの特定の条件をターゲットにしましょう。",
- "policiesBladeTitle": "ポリシー",
- "policiesBladeTitleWithAppName": "ポリシー: {0}",
- "policiesDisabledBannerText": "リンクされたサインオン属性が設定されたアプリケーションの場合、ポリシーの作成および編集は禁止されています。",
- "policiesHitMaxLimitStatusBarMessage": "このテナントのポリシーの最大数に達しました。さらに作成するには、その前にいくつかのポリシーを削除してください。",
- "policyAssignmentsSection": "割り当て",
- "policyBlockAllInfoBox": "構成されたポリシーはすべてのユーザーをブロックするため、サポートされていません。割り当てとコントロールを確認してください。このポリシーを保存する場合は、現在のユーザー {0} を除外します。",
- "policyCloudAppsDisplayTextAllApp": "すべてのアプリ",
- "policyCloudAppsLabel": "クラウド アプリ",
- "policyConditionClientAppDescription": "ユーザーがクラウド アプリへのアクセスに使用しているソフトウェア。例: 'ブラウザー'",
- "policyConditionClientAppV2Description": "ユーザーがクラウド アプリへのアクセスに使用しているソフトウェア。例: 'ブラウザー'",
- "policyConditionDevicePlatform": "デバイス プラットフォーム",
- "policyConditionDevicePlatformDescription": "ユーザーがサインインしているプラットフォーム。例: 'iOS'",
- "policyConditionLocation": "場所",
- "policyConditionLocationDescription": "ユーザーがサインインしている場所 (IP アドレスの範囲を使用して特定)",
- "policyConditionLocationPreview": "場所 (プレビュー)",
- "policyConditionSigninRisk": "サインインのリスク",
- "policyConditionSigninRiskDescription": "対象ユーザー以外からのサインインの可能性。リスク レベルは高、中、または低になります。Microsoft Entra ID P2 ライセンスが必要です。",
- "policyConditionUserRisk": "ユーザーのリスク",
- "policyConditionUserRiskDescription": "ポリシーを適用するために必要なユーザー リスクのレベルを構成します",
- "policyConditioniClientApp": "クライアント アプリ",
- "policyControlAllowAccessDisplayedName": "アクセス権の付与",
- "policyControlAuthenticationStrengthDisplayedName": "認証強度が必要 (プレビュー)",
- "policyControlBladeTitle": "許可",
- "policyControlBlockAccessDisplayedName": "アクセスのブロック",
- "policyControlCompliantDeviceDisplayedName": "デバイスは準拠しているとしてマーク済みである必要があります",
- "policyControlContentDescription": "アクセスをブロックまたは許可するため、アクセスの適用を制御します。",
- "policyControlInfoBallonText": "アクセスをブロックするか、アクセスを許可するために満たす必要のある追加要件を選択します",
- "policyControlMfaChallengeDisplayedName": "多要素認証を要求する",
- "policyControlRequireCompliantAppDisplayedName": "アプリの保護ポリシーが必要",
- "policyControlRequireDomainJoinedDisplayedName": "Microsoft Entra ハイブリッド参加済みデバイスが必要",
- "policyControlRequireMamDisplayedName": "承認されたクライアント アプリが必要です",
- "policyControlRequiredPasswordChangeDisplayedName": "パスワードの変更を必須とする",
- "policyControlSelectAuthStrength": "認証強度が必要",
- "policyControlsNoControlsSelected": "0 個のコントロールが選択されました",
- "policyControlsSection": "アクセス制御",
- "policyCreatBladeTitle": "新規",
- "policyCreateButton": "作成",
- "policyCreateFailedMessage": "エラー: {0}",
- "policyCreateFailedTitle": "'{0}' を作成できませんでした",
- "policyCreateInProgressTitle": "'{0}' を作成しています",
- "policyCreateSuccessMessage": "'{0}' が正常に作成されました。[ポリシーの有効化] を [オン] に設定してある場合は、ポリシーが数分で有効になります。",
- "policyCreateSuccessTitle": "'{0}' が正常に作成されました",
- "policyDeleteConfirmation": "'{0}' を削除しますか? この操作は元に戻すことができません。",
- "policyDeleteFailTitle": "'{0}' の削除に失敗しました",
- "policyDeleteInProgressTitle": "'{0}' を削除しています",
- "policyDeleteSuccessTitle": "'{0}' が正常に削除されました",
- "policyEnforceLabel": "ポリシーの有効化",
- "policyErrorCannotSetSigninRisk": "サインイン リスクの条件を含むポリシーを保存するアクセス許可がありません。",
- "policyErrorNoPermission": "ポリシーを保存するアクセス許可を持っていません。全体管理者に問い合わせてください。",
- "policyErrorUnknown": "問題が発生しました。後でもう一度お試しください。",
- "policyFallbackWarningMessage": "MS Graph を使用して '{0}' を作成または更新できませんでした。AD グラフにフォールバックします。互換性のない条件を持つ MS Graph のポリシー エンドポイントを呼び出すときにバグが発生する可能性が最も高いため、以下のシナリオを調査してください。",
- "policyFallbackWarningTitle": "'{0}' の作成または更新が部分的に成功しました",
- "policyNameCannotBeEmpty": "ポリシー名を空にすることはできません",
- "policyNameDevice": "デバイス ポリシー",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "モバイル アプリの管理ポリシー",
- "policyNameMfaLocation": "多要素認証と場所のポリシー",
- "policyNamePlaceholderText": "例: 'デバイス準拠アプリ ポリシー'",
- "policyNameTooLongError": "ポリシー名が長すぎます。最大 256 文字です",
- "policyOff": "オフ",
- "policyOn": "オン",
- "policyReportOnly": "レポート専用",
- "policyReviewSection": "確認",
- "policySaveButton": "保存",
- "policyStatusIconDescription": "ポリシーが有効",
- "policyStatusIconEnabled": "有効な状態のアイコン",
- "policyTemplateName1": "アプリによって適用される制限を {0} のブラウザー アクセスに使用する",
- "policyTemplateName2": "マネージド デバイスで {0} のアクセスのみを許可する",
- "policyTemplateName3": "継続的アクセス評価の設定から移行されたポリシー",
- "policyTriggerRiskSpecific": "特定のリスク レベルの選択",
- "policyTriggersInfoBalloonText": "ポリシーが適用されるタイミングを定義する条件。例: '場所'",
- "policyTriggersNoConditionsSelected": "0 個の条件が選択されました",
- "policyTriggersSelectorLabel": "条件",
- "policyUpdateFailedMessage": "エラー: {0}",
- "policyUpdateFailedTitle": "{0} を更新できませんでした",
- "policyUpdateInProgressTitle": "{0}の更新中",
- "policyUpdateSuccessMessage": "{0} が正常に更新されました。[ポリシーの有効化] を [オン] に設定している場合は、ポリシーが数分で有効になります。",
- "policyUpdateSuccessTitle": "{0} が正常に更新されました",
- "primaryCol": "プライマリ",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "レポート専用モード: サインイン時にポリシーが評価されてログに記録されますが、ユーザーに影響しません。",
- "requireAllControlsText": "選択したコントロールすべてが必要",
- "requireCompliantDevice": "準拠しているデバイスが必要です",
- "requireDomainJoined": "ドメインに参加しているデバイスが必要",
- "requireGrantReauth": "[サインインの頻度 (毎回)] セッション制御には、[すべてのクラウド アプリ] が選択されている場合、[多要素認証を要求する] または [パスワードの変更を要求する] 許可制御が必要です",
- "requireMFA": "多要素認証を要求する",
- "requireMfaReauth": "[サインインの頻度 (毎回)] セッション制御には、[サインイン リスク] に対して [多要素認証を要求する] 許可制御が必要です",
- "requireOneControlText": "選択したコントロールのいずれかが必要",
- "requirePasswordChangeReauth": "[サインインの頻度 (毎回)] セッション コントロールには、[ユーザー リスク] に対して [パスワードの変更を要求する] 許可コントロールが必要です",
- "requireRiskReauth": "[サインインの頻度 (毎回)] セッション コントロールには、[すべてのクラウド アプリ] が選択されている場合、[ユーザー リスク] または [サインイン リスク] セッション コントロールが必要です。",
- "requireRiskReauthRiskNotEnabled": "[すべてのクラウド アプリ] が選択されている場合、[サインインの頻度 (毎回)] セッション コントロールは利用できません。",
- "requireRiskReauthSignInOnly": "[すべてのクラウド アプリ] が選択されている場合、[サインインの頻度 (毎回)] セッション コントロールには、[サインイン リスク] セッション コントロールが必要です。",
- "requireRiskReauthUserOnly": "[すべてのクラウド アプリ] が選択されている場合、[サインインの頻度 (毎回)] セッション コントロールには、[ユーザー リスク] セッション コントロールが必要です。",
- "resetFilters": "フィルターのリセット",
- "sPRequired": "サービス プリンシパルは必須です",
- "sPSelectorInfoBalloon": "テストするユーザーまたはサービス プリンシパル",
- "saturday": "土曜日",
- "searchTextTooLongError": "検索テキストが長すぎます。最大 256 文字",
- "securityDefaultsPolicyName": "セキュリティの既定値群",
- "securityDefaultsTextMessage": "条件付きアクセス ポリシーを有効にするには、セキュリティの既定値群を無効にする必要があります。",
- "securityDefaultsUpdateInProgressText": "セキュリティの既定値群の更新が進行中です。しばらく待ってから、もう一度お試しください。",
- "securityDefaultsWarningMessage": "組織のセキュリティ構成を管理しようとしているようです。条件付きアクセス ポリシーを有効にする前に、まず{0}セキュリティの既定値群を無効にする{1}必要があります。",
- "selectDevicePlatforms": "デバイス プラットフォームの選択",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "場所の選択",
- "selectedSP": "選択されたサービス プリンシパル",
- "servicePrincipalBladeExcludedSelectorTitle": "除外するサービス プリンシパルの選択",
- "servicePrincipalBladeIncludedSelectorTitle": "サービス プリンシパルの選択",
- "servicePrincipalDataGridAria": "使用可能なサービス プリンシパルの一覧",
- "servicePrincipalDropDownLabel": "このポリシーは何に適用されますか?",
- "servicePrincipalInfoBox": "ポリシーの割り当てで '{0}' が選択されているため、一部の条件を使用できません",
- "servicePrincipalRadioAll": "所有されているすべてのサービス プリンシパル",
- "servicePrincipalRadioSelect": "サービス プリンシパルの選択",
- "servicePrincipalSelectionsAria": "選択されたサービス プリンシパル グリッド",
- "servicePrincipalSelectorAria": "選択されたサービス プリンシパルの一覧",
- "servicePrincipalSelectorMultiple": "{0} 個のサービス プリンシパルが選択済み",
- "servicePrincipalSelectorSingle": "1 つのサービス プリンシパルが選択済み",
- "servicePrincipalSpecificExc": "特定のサービス プリンシパルが除外されている",
- "servicePrincipalSpecificInc": "特定のサービス プリンシパルが含まれている",
- "servicePrincipals": "サービス プリンシパル",
- "sessionControlBladeTitle": "セッション",
- "sessionControlDescriptionContent": "特定のクラウド アプリケーション内で限定的なエクスペリエンスを有効にするため、セッション制御に基づいてアクセスを制御します。",
- "sessionControlDisableInfo": "この制御は、サポートされているアプリでのみ動作します。現在、Office 365、Exchange Online、SharePoint Online のみが、アプリによって適用される制限をサポートするクラウド アプリです。詳細についてはここをクリックしてください。",
- "sessionControlInfoBallonText": "セッション制御により、クラウド アプリ内での操作の制限が可能になります。",
- "sessionControls": "セッション制御",
- "sessionControlsAppEnforcedLabel": "アプリによって適用される制限を使用する",
- "sessionControlsCasLabel": "アプリの条件付きアクセス制御を使う",
- "sessionControlsSecureSignInLabel": "トークンのバインドが必要",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} 件を含む",
- "signinRiskReauth": "[多要素認証を要求する] 許可と [サインインの頻度 (毎回)] セッション制御が選択されている場合は、[サインイン リスク] 条件を選択する必要があります",
- "signinRiskTriggerDescriptionContent": "サインイン リスク レベルの選択",
- "singleTenantServicePrincipalInfoBallonText": "ポリシーは、組織が所有するシングル テナントのサービス プリンシパルにのみ適用されます。詳細については、ここをクリックしてください ",
- "specificSigninRiskLevelsOption": "特定のサインイン リスク レベルを選択する",
- "specificUsersExcluded": "除外された特定のユーザー",
- "specificUsersIncluded": "組み込まれた特定のユーザー",
- "specificUsersIncludedAndExcluded": "除外および追加する特定のユーザー",
- "startDatePickerLabel": "開始時",
- "startFreeTrial": "無料試用版の開始",
- "startTimePickerLabel": "開始時刻",
- "sunday": "日曜日",
- "testButton": "What If",
- "thumbprintCol": "拇印",
- "thursday": "木曜日",
- "timeConditionAllTimesLabel": "日時指定なし",
- "timeConditionIntroText": "このポリシーが適用される時刻を構成します",
- "timeConditionSelectorInfoBallonContent": "ユーザーがサインインしている時間。たとえば、\"水曜日午前 9 時 - 午後 5 時 (PST)\"",
- "timeConditionSelectorLabel": "時間 (プレビュー)",
- "timeConditionSpecificLabel": "特定の時間",
- "timeSelectorAllTimesText": "日時指定なし",
- "timeSelectorSpecificTimesText": "特定の時間が構成されました",
- "timeZoneDropdownInfoBalloonContent": "時間の範囲を定義するタイム ゾーンを選択します。このポリシーは、すべてのタイム ゾーンのユーザーに適用されます。たとえば、あるユーザーの '水曜日午前 9 時 - 午後 5 時' は、別のタイム ゾーンのユーザーの場合に '水曜日午前 10 時 - 午後 6 時' になります。",
- "timeZoneDropdownLabel": "タイム ゾーン",
- "timeZoneDropdownPlaceholderText": "タイム ゾーンの選択",
- "tooManyPoliciesDescription": "現在表示されているポリシーは最初の 50 個のみです。すべてのポリシーを表示するには、ここをクリックしてください",
- "tooManyPoliciesTitle": "50 個を超えるポリシーが見つかりました",
- "trustedLocationStatusIconDescription": "場所は信頼されています",
- "trustedLocationStatusIconEnabled": "信頼された状態のアイコン",
- "tuesday": "火曜日",
- "uploadInBadState": "指定したファイルをアップロードできません。",
- "upsellAppsDescription": "機密情報を扱うアプリケーションでは、常時または会社のネットワーク外部からアクセスする場合のみ、多要素認証が必要です。",
- "upsellAppsTitle": "セキュリティで保護されたアプリケーション",
- "upsellBannerText": "無料の Premium 評価版を入手して、この機能を使用します",
- "upsellDataDescription": "会社のリソースへのアクセスを許可するには、デバイスが準拠としてマーク済みまたは Microsoft Entra Hybrid 参加済みである必要があります。",
- "upsellDataTitle": "セキュリティで保護されたデータ",
- "upsellDescription": "条件付きアクセスは、会社のデータを安全に保つために必要な制御と保護を提供すると同時に、ユーザーが任意のデバイスから最適な作業を実行できるようにします。たとえば、会社のネットワーク外部からのアクセスを制限したり、コンプライアンス ポリシーを満たすデバイスへのアクセスを制限したりできます。",
- "upsellRiskDescription": "Microsoft の機械学習システムで検出されたリスク イベントには多要素認証が必要です。",
- "upsellRiskTitle": "リスクからの保護",
- "upsellTitle": "条件付きアクセス",
- "upsellWhyTitle": "条件付きアクセスを使用する理由",
- "userAppNoneOption": "なし",
- "userNamePlaceholderText": "ユーザー名の入力",
- "userNotSetSeletorLabel": "0 個のユーザーとグループが選択されました",
- "userOnlySelectionBladeExcludeDescription": "ポリシーから除外するユーザーを選択します",
- "userOrGroupSelectionCountDiffBannerText": "このポリシーで構成されている {0} がディレクトリから削除されましたが、このポリシーの他のユーザーとグループには影響ありません。ポリシーを次回更新するときに、削除されたユーザーおよびグループが自動的に削除されます。",
- "userOrSPNotSetSelectorLabel": "ユーザーまたはワークロード ID が選択されていません",
- "userOrSPSelectionBladeTitle": "ユーザーまたはワークロード ID",
- "userOrSPSelectorInfoBallonText": "ユーザー、グループ、サービス プリンシパルなど、ポリシーが適用されるディレクトリ内の ID",
- "userRequired": "ユーザーが必要",
- "userRiskErrorBox": "\"パスワードの変更が必要\" 許可が選択されている場合は、\"ユーザーのリスク\" 条件を選択する必要があります",
- "userRiskReauth": "[パスワードの変更を要求する] 許可と [サインインの頻度 (毎回)] セッション制御が選択されている場合は、[サインイン リスク] ではなく [ユーザーのリスク] 条件を選択する必要があります",
- "userSPRequired": "ユーザーまたはサービス プリンシパルは必須です",
- "userSPSelectorTitle": "ユーザーまたはワークロード ID",
- "userSelectionBladeAllUsersAndGroups": "すべてのユーザーとグループ",
- "userSelectionBladeExcludeDescription": "ポリシーから除外するユーザーとグループを選択します",
- "userSelectionBladeExcludeTabTitle": "対象外",
- "userSelectionBladeExcludedSelectorTitle": "除外されたユーザーとグループの選択",
- "userSelectionBladeIncludeDescription": "このポリシーが適用されるユーザーを選択します",
- "userSelectionBladeIncludeTabTitle": "対象",
- "userSelectionBladeIncludedSelectorTitle": "選択",
- "userSelectionBladeSelectUsers": "ユーザーの選択",
- "userSelectionBladeSelectedUsers": "ユーザーとグループの選択",
- "userSelectionBladeTitle": "ユーザーとグループ",
- "userSelectorBladeTitle": "ユーザー",
- "userSelectorExcluded": "{0} 件を除く",
- "userSelectorGroupPlural": "{0} グループ",
- "userSelectorGroupSingular": "1 グループ",
- "userSelectorIncluded": "{0} 件を含む",
- "userSelectorInfoBallonText": "ポリシーが適用されるディレクトリ内のユーザーとグループ。例: 'パイロット グループ'",
- "userSelectorSelected": "{0} 件を選択済み",
- "userSelectorTitle": "ユーザー",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} のユーザー",
- "userSelectorUserSingular": "1 ユーザー",
- "userSelectorWithExclusion": "{0} および {1}",
- "usersGroupsLabel": "ユーザーとグループ",
- "viewApprovedAppsText": "承認されたクライアント アプリの一覧を表示します",
- "viewCompliantAppsText": "ポリシーで保護されたクライアント アプリの一覧を表示します",
- "viewPolicyInformation": "ポリシー情報の表示",
- "vpnBladeTitle": "VPN 接続",
- "vpnCertCreateFailedMessage": "エラー: {0}",
- "vpnCertCreateFailedTitle": "{0} の作成に失敗しました",
- "vpnCertCreateInProgressTitle": "{0} を作成しています",
- "vpnCertCreateSuccessMessage": "{0} が正常に作成されました。",
- "vpnCertCreateSuccessTitle": "{0} が正常に作成されました",
- "vpnCertNoRowsMessage": "VPN 証明書が見つかりません",
- "vpnCertUpdateFailedMessage": "エラー: {0}",
- "vpnCertUpdateFailedTitle": "{0} を更新できませんでした",
- "vpnCertUpdateInProgressTitle": "{0}の更新中",
- "vpnCertUpdateSuccessMessage": "{0} が正常に更新されました。",
- "vpnCertUpdateSuccessTitle": "{0} が正常に更新されました",
- "vpnFeatureInfo": "VPN 接続と条件付きアクセスの詳細については、こちらをクリックしてください。",
- "vpnFeatureWarning": "ポータルで VPN 証明書が作成されると、Microsoft Entra ID ですぐにそれが使用され始めて、存続期間が短い証明書が VPN クライアントに対して発行されます。VPN クライアントの資格情報の検証に関する問題を回避するために、VPN 証明書を直ちに VPN サーバーに展開することが重要です。",
- "vpnMenuText": "VPN 接続",
- "vpncertDropdownDefaultOption": "期間",
- "vpncertDropdownInfoBalloonContent": "作成する証明書の有効期間を選択します",
- "vpncertDropdownLabel": "時間の選択",
- "vpncertDropdownOneyearOption": "1 年",
- "vpncertDropdownThreeyearOption": "3 年",
- "vpncertDropdownTwoyearOption": "2 年",
- "wednesday": "水曜日",
- "whatIfCountry": "国/地域",
- "whatIfCountryInfo": "ユーザーがサインインしている国/地域。",
- "whatIfDevicePlatformInfo": "ユーザーがサインインしているデバイス プラットフォーム。",
- "whatIfEnterIpAddress": "IP アドレスを入力してください (例: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "無効な IP アドレスが指定されました。",
- "whatIfIpAddress": "IP アドレス",
- "whatIfIpAddressInfo": "ユーザーがサインインしている IP アドレス。",
- "whatIfIpCountryInfoBoxText": "IP アドレスまたは国/地域を使用する場合、両方のフィールドが必要になり、共に正しくマップする必要があります。",
- "whatIfSelectCountry": "国/地域を選択してください...",
- "whatIfSelectDevicePlatform": "デバイス プラットフォームの選択...",
- "whatIfSelectPrivateLink": "プライベート リンクを選択してください...",
- "whatIfSelectSignInRisk": "サインイン リスクを選択...",
- "whatIfSignInRisk": "サインイン リスク",
- "whatIfSignInRiskInfo": "サインインに関連付けられているリスク レベル",
- "whatIfUnknownAreas": "不明な領域",
- "windows365InfoBox": "Windows 365 を選択すると、クラウド PC と Azure Virtual Desktop セッション ホストへの接続に影響します。詳細については、こちらをクリックしてください。",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "ワークロード ID (プレビュー)",
- "workloadIdentitiesLicenseText": "このポリシーを編集するには、ワークロード ID の Premium P1 または P2 ライセンスが必要です。",
- "workloadIdentity": "ワークロード ID"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "未サポート",
- "supportEnding": "サポート終了間近",
- "supported": "サポートあり"
- }
- },
- "SecurityTemplate": {
- "aSR": "攻撃面の減少",
- "accountProtection": "アカウント保護",
- "allDevices": "すべてのデバイス",
- "antivirus": "ウイルス対策",
- "antivirusReporting": "ウイルス対策レポート (プレビュー)",
- "conditionalAccess": "条件付きアクセス",
- "deviceCompliance": "デバイスのポリシー準拠",
- "diskEncryption": "ディスクの暗号化",
- "eDR": "エンドポイントの検出と応答",
- "ePM": "エンドポイント特権の管理",
- "firewall": "ファイアウォール",
- "helpSupport": "ヘルプとサポート",
- "setup": "セットアップ",
- "wdapt": "Microsoft Defender for Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "失敗",
- "hardReboot": "ハード リブート",
- "retry": "再試行",
- "softReboot": "ソフト リブート",
- "success": "成功"
- },
- "Columns": {
- "codeType": "コードの種類",
- "returnCode": "リターン コード"
- },
- "bladeTitle": "リターン コード",
- "gridAriaLabel": "リターン コード",
- "header": "インストール後の動作を示すリターン コードを指定します。",
- "onAddAnnounceMessage": "{1} のアイテム {0} が追加されたリターン コード",
- "onDeleteSuccess": "リターン コード {0} が正常に削除されました",
- "returnCodeAlreadyUsedValidation": "リターン コードは既に使用されています。",
- "returnCodeMustBeIntegerValidation": "リターン コードは整数である必要があります。",
- "returnCodeShouldBeAtLeast": "リターン コードは {0} 以上である必要があります。",
- "returnCodeShouldBeAtMost": "リターン コードは {0} 以下である必要があります。",
- "selectorLabel": "リターン コード"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "アラビア語",
- "bulgarian": "ブルガリア語",
- "chineseSimplified": "簡体中国語",
- "chineseTraditional": "繁体中国語",
- "croatian": "クロアチア語",
- "czech": "チェコ語",
- "danish": "デンマーク語",
- "dutch": "オランダ語",
- "englishUK": "英語 (イギリス)",
- "englishUS": "英語 (米国)",
- "estonian": "エストニア語",
- "finnish": "フィンランド語",
- "frenchCanada": "フランス語 (カナダ)",
- "frenchFrance": "フランス語 (フランス)",
- "german": "ドイツ語",
- "greek": "ギリシャ語",
- "hebrew": "ヘブライ語",
- "hungarian": "ハンガリー語",
- "italian": "イタリア語",
- "japanese": "日本語",
- "korean": "韓国語",
- "latvian": "ラトビア語",
- "lithuanian": "リトアニア語",
- "norwegian": "ノルウェー語ブークモール",
- "polish": "ポーランド語",
- "portugueseBrazil": "ポルトガル語 (ブラジル)",
- "portuguesePortugal": "ポルトガル語 (ポルトガル)",
- "romanian": "ルーマニア語",
- "russian": "ロシア語",
- "serbian": "セルビア語",
- "slovak": "スロバキア語",
- "slovenian": "スロベニア語",
- "spanishMexico": "スペイン語 (メキシコ)",
- "spanishSpain": "スペイン語 (スペイン)",
- "swedish": "スウェーデン語",
- "thai": "タイ",
- "turkish": "トルコ語",
- "ukrainian": "ウクライナ語"
- },
- "Summary": {
- "placeholder": "内容をプレビューするには、左から通知メッセージを選択します。"
- },
- "companyContact": "連絡先情報を表示する",
- "companyLogo": "会社のロゴを表示する",
- "companyName": "会社名を表示する",
- "createEditDescription": "通知メッセージ テンプレートを作成または編集します。",
- "createMessage": "メッセージの作成",
- "deviceDetails": "デバイスの詳細を表示する",
- "deviceDetailsInfoBox": "デバイスの詳細を取得するとメール通知の受信に遅延が発生する可能性があるため、この設定は既定でオフになっています。",
- "editImpactInfo": "この通知メッセージ テンプレートを編集すると、このテンプレートを使用しているすべてのポリシーに影響します。",
- "editMessage": "メッセージの編集",
- "email": "電子メール",
- "emailFooterTitle": "メールのフッター",
- "emailHeaderFooterInfo": "メール通知のメール ヘッダーとフッターの設定は、エンドポイント マネージャーのテナント管理ノード内のカスタマイズ設定に依存しています。",
- "emailHeaderTitle": "メールのヘッダー",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "カスタマイズ設定の構成",
- "formSubTitle": "通知メールの作成または変更",
- "headerFooterSettingsTab": "ヘッダーとフッターの設定",
- "imgPreview": "画像プレビュー",
- "infotext": "通知メッセージを選択します。新しい通知を作成するには、[デバイス コンプライアンスの設定] ワークロードの [管理] セクションの [通知] にアクセスしてください。",
- "iwLink": "会社のポータル Web サイトのリンクを表示する",
- "listEmpty": "メッセージ テンプレートがありません。",
- "listEmptySelectOnly": "メッセージ テンプレートがありません。新しい通知を作成するには、[デバイス コンプライアンスの設定] ワークロードの [管理] セクションの [通知] にアクセスしてください。",
- "listSubTitle": "通知メッセージ テンプレートの一覧",
- "listTitle": "通知メッセージ テンプレート",
- "localizedNotificationMessageTemplates": "ローカライズされた通知メッセージ テンプレート",
- "messageAssigned": "このメッセージ テンプレートは現在、1 つ以上のコンプライアンス ポリシーで使用されているため、削除できません。",
- "messageCapitalized": "通知メッセージ テンプレート",
- "messageLowercase": "通知メッセージ テンプレート",
- "missingDefaultError": "既定のテンプレートを選択してください",
- "notificationMessageTemplates": "通知メッセージ テンプレート",
- "rowValidationError": "少なくとも 1 つのメッセージ テンプレートが必要です",
- "selectDescription": "通知メッセージを選択します。新しい通知を作成するには、[デバイス コンプライアンスの設定] ワークロードの [管理] セクションの [通知] にアクセスしてください。",
- "tenantValueText": "テナント値",
- "testEmailLabel": "プレビュー メールの送信",
- "localeLabel": "ロケール",
- "isDefaultLocale": "既定である"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "再起動が強制されるまでの待機日数"
- },
"Description": {
"label": "説明"
},
+ "FeatureDeploymentSettings": {
+ "header": "機能展開設定"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "この機能でデバイスをダウングレードすることはできません。",
+ "label": "展開する機能更新プログラム"
+ },
+ "GradualRolloutEndDate": {
+ "label": "最後のグループの状態"
+ },
+ "GradualRolloutInterval": {
+ "label": "グループ間の日数"
+ },
+ "GradualRolloutStartDate": {
+ "label": "最初のグループの状態"
+ },
"Name": {
"label": "名前"
},
- "QualityUpdateRelease": {
- "label": "デバイスの OS バージョンが次より小さい場合に品質更新プログラムを迅速にインストールする:"
- },
- "bladeTitle": "Windows 10 以降の品質更新プログラム (プレビュー)",
- "loadError": "読み込みに失敗しました。"
+ "OptionalUpdate": {
+ "label": "必須またはオプションの更新プログラム"
+ },
+ "RolloutOptions": {
+ "label": "ロールアウト オプション"
+ },
+ "RolloutSettings": {
+ "header": "Windows Update でいつ更新プログラムを利用したいですか?"
+ },
+ "ScopeSettings": {
+ "header": "このポリシーのスコープ タグを構成する"
+ },
+ "StartDateOnlyStartDate": {
+ "label": "最初の利用可能日"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "無効",
+ "enabled": "有効",
+ "infoBalloonContent": "Windows 11 の対象ではないデバイスに最新の Windows 10 機能更新プログラムをインストールするかどうかを制御します",
+ "label": "デバイスが Windows 11 の実行対象ではない場合は、最新の Windows 10 機能更新プログラムをインストールしてください",
+ "notApplicable": "該当なし",
+ "summaryLabel": "Windows 11 の実行対象ではないデバイスに Windows 10 をインストールする"
+ },
+ "bladeTitle": "機能の更新プログラムの展開",
+ "deploymentSettingsTitle": "デプロイの設定",
+ "loadError": "読み込みに失敗しました。",
+ "windows11EULA": "この機能更新プログラムを選択して展開すると、(1) 該当する Windows ライセンスがボリューム ライセンスで購入されたか、(2) 組織をバインドする権限を持ち、関連する Microsoft ソフトウェア ライセンス条項 ({0}) を受け入れているデバイスにこのオペレーティング システムを適用することに同意したものと見なされます。"
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\" が保存されました。",
+ "newFeatureUpdateDeploymentCreated": "新しい機能更新プログラムの展開が作成されました。"
+ },
"TabName": {
- "qualityUpdateSettings": "設定"
+ "deploymentSettings": "デプロイの設定",
+ "groupAssignmentSettings": "割り当て",
+ "scopeSettings": "スコープ タグ"
},
- "infoBoxText": "既存の Windows 10 以降の更新リング ポリシー以外で現在利用可能な専用の品質更新プログラム コントロールは、指定された修正プログラム レベルより低いデバイスの品質更新プログラムを迅速に処理する機能だけです。今後、追加のコントロールが使用可能になります。",
- "licenseLearnMoreText": "前提条件と品質更新プログラム ポリシーに関する詳細をご覧ください。",
- "licenseWarningBoxText": "品質更新プログラム ポリシーの作成には、特定のライセンスが必要です。",
- "warningBoxText": "ソフトウェア更新プログラムを迅速にインストール処理すると、必要に応じてコンプライアンスを満たすまでの時間を短縮するのに役立ちますが、エンド ユーザーの生産性に大きく影響します。営業時間中の再起動が大幅に増えるおそれがあります。"
+ "gradualRolloutLicenseWarning": "この機能には特定のライセンスが必要です。",
+ "gradualRolloutLicenseWarningEdit": "この機能は、この機能が選択されていない状態でポリシーが保存されるまで引き続き使用および構成できます。",
+ "licenseLearnMoreText": "前提条件と機能更新プログラム ポリシーに関する詳細をご覧ください。",
+ "optionalUpdateWarning": "オプションは、Windows 11更新プログラムでのみ使用できます",
+ "profileNameWarning": "名前は 64 文字未満でなければなりません",
+ "specificLicensingRequired": "選択した機能の一部には、特定のライセンスが必要です。"
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64 ビット",
- "thirtyTwoBit": "32 ビット"
- },
- "TACSettings": {
- "edgeSettings": "Microsoft Edge の構成設定",
- "edgeWindowsDataProtectionSettings": "Microsoft Edge (Windows) のデータ保護設定 - プレビュー",
- "edgeWindowsSettings": "Microsoft Edge (Windows) の構成設定 - プレビュー",
- "generalAppConfig": "一般的なアプリの構成",
- "generalSettings": "一般的な構成設定",
- "outlookSMIMEConfig": "Outlook S/MIME の設定",
- "outlookSettings": "Outlook の構成設定",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "ネットワーク境界の追加",
- "addNetworkBoundaryButton": "ネットワーク境界の追加...",
- "allowWindowsSearch": "暗号化された会社のデータとストア アプリの検索を Windows Search に許可する",
- "authoritativeIpRanges": "エンタープライズ IP 範囲の一覧を優先する (自動検出しない)",
- "authoritativeProxyServers": "エンタープライズ プロキシ サーバーの一覧を優先する (自動検出しない)",
- "boundaryType": "境界の種類",
- "cloudResources": "クラウド リソース",
- "corporateIdentity": "会社の ID",
- "dataRecoveryCert": "データ回復エージェント (DRA) 証明書をアップロードして、暗号化されたデータの回復を許可します",
- "editNetworkBoundary": "ネットワーク境界の編集",
- "enrollmentState": "登録の状態",
- "iPv4Ranges": "IPv4 範囲",
- "iPv6Ranges": "IPv6 範囲",
- "internalProxyServers": "内部プロキシ サーバー",
- "maxInactivityTime": "デバイスが PIN またはパスワードでロックされるまでの最大のアイドル時間 (分)",
- "maxPasswordAttempts": "デバイスがワイプされるまでの認証失敗の回数",
- "mdmDiscoveryUrl": "MDM 探索 URL",
- "mdmRequiredSettingsInfo": "このポリシーは、Windows 10 Anniversary Edition 以降にのみ適用されます。このポリシーでは保護を適用するために Windows Information Protection (WIP) を使用します。",
- "minimumPinLength": "PIN に必要な最小文字数を設定します",
- "name": "名前",
- "networkBoundariesGridEmptyText": "追加したネットワーク境界がここに表示されます",
- "networkBoundary": "ネットワーク境界",
- "networkDomainNames": "ネットワーク ドメイン",
- "neutralResources": "ニュートラル リソース",
- "passportForWork": "Windows にサインインする方法として Windows Hello for Business を使います",
- "pinExpiration": "PIN を変更するようにシステムからユーザーに要求が出されるまでの期間 (日数) を指定します",
- "pinHistory": "再利用できないユーザー アカウントに関連付けることができる以前の PIN の数を指定します",
- "pinLowercaseLetters": "Windows Hello for Business 用の PIN に小文字を使うことを構成します",
- "pinSpecialCharacters": "Windows Hello for Business 用の PIN に特殊文字を使うことを構成します",
- "pinUppercaseLetters": "Windows Hello for Business 用の PIN に大文字を使うことを構成します",
- "protectUnderLock": "デバイスのロック時にアプリから会社のデータにアクセスできないようにします。Windows 10 Mobile のみに適用されます",
- "protectedDomainNames": "保護されたドメイン",
- "proxyServers": "プロキシ サーバー",
- "requireAppPin": "デバイス PIN が管理されている場合にアプリ PIN を無効にする",
- "requiredSettings": "必須の設定",
- "requiredSettingsInfo": "スコープを変更するか、このポリシーを削除すると、会社のデータの暗号化が解除されます。",
- "revokeOnMdmHandoff": "デバイスを MDM に登録するときに、保護されたデータへのアクセス権を取り消す",
- "revokeOnUnenroll": "登録解除時に暗号化キーを取り消す",
- "rmsTemplateForEdp": "Azure RMS に使うテンプレート ID を指定します",
- "showWipIcon": "エンタープライズ データ保護アイコンを表示します",
- "type": "種類",
- "useRmsForWip": "Azure RMS を WIP のために使います",
- "value": "値",
- "weRequiredSettingsInfo": "このポリシーは、Windows 10 Creators Update 以降にのみ適用されます。ポリシーでは保護を適用するために Windows Information Protection (WIP) と Windows MAM を使用します。",
- "wipProtectionMode": "Windows Information Protection モード",
- "withEnrollment": "登録済み",
- "withoutEnrollment": "未登録"
+ "Platform": {
+ "all": "すべて",
+ "android": "Android デバイス管理者",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "共通",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS および Android",
+ "iosCommaAndroidPlatformLabel": "iOS、Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "不明",
+ "unsupported": "サポートなし",
+ "windows": "Windows",
+ "windows10": "Windows 10 以降",
+ "windows10CM": "Windows 10 以降 (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 以降",
+ "windows8And10": "Windows 8 および 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 以降",
+ "windows10AndWindowsServer": "Windows 10、Windows 11、および Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 以降 (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows PC"
+ },
+ "InstallIntent": {
+ "available": "登録済みデバイスで使用可能",
+ "availableWithoutEnrollment": "登録の有無にかかわらず使用可能",
+ "required": "必須",
+ "uninstall": "アンインストール"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "フィルター",
+ "noFilters": "なし"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "作成者",
- "template": "テンプレート名"
- },
- "Row": {
- "ariaLabel": "行 {0} / {1}、列 {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "最初から開始し、使用可能なインベントリ プロパティのライブラリから必要なプロパティを選択します"
- },
- "SettingsCatalog": {
- "subtitle": "最初から始め、使用可能な設定のライブラリから必要な設定を選択します",
- "title": "設定カタログ"
- },
- "Templates": {
- "subtitle": "テンプレートには、機能ごとに整理された設定のグループが含まれています。ポリシーを手動で作成しない場合や、WiFi や VPN の構成など企業ネットワークにアクセスするようデバイスを構成する場合は、テンプレートを使用します。",
- "title": "テンプレート"
- },
- "noData": "ポリシー テンプレートが見つかりません"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop Client",
- "visioProRetail": "Visio Online プラン 2"
- },
- "Countries": {
- "ae": "アラブ首長国連邦",
- "ag": "アンティグア・バーブーダ",
- "ai": "アンギラ",
- "al": "アルバニア",
- "am": "アルメニア",
- "ao": "アンゴラ",
- "ar": "アルゼンチン",
- "at": "オーストリア",
- "au": "オーストラリア",
- "az": "アゼルバイジャン",
- "bb": "バルバドス",
- "be": "ベルギー",
- "bf": "ブルキナファソ",
- "bg": "ブルガリア",
- "bh": "バーレーン",
- "bj": "ベナン",
- "bm": "バミューダ",
- "bn": "ブルネイ",
- "bo": "ボリビア",
- "br": "ブラジル",
- "bs": "バハマ",
- "bt": "ブータン",
- "bw": "ボツワナ",
- "by": "ベラルーシ",
- "bz": "ベリーズ",
- "ca": "カナダ",
- "cg": "コンゴ共和国",
- "ch": "スイス",
- "cl": "チリ",
- "cn": "中国",
- "co": "コロンビア",
- "cr": "コスタリカ",
- "cv": "カーボベルデ",
- "cy": "キプロス",
- "cz": "チェコ共和国",
- "de": "ドイツ",
- "dk": "デンマーク",
- "dm": "ドミニカ国",
- "do": "ドミニカ共和国",
- "dz": "アルジェリア",
- "ec": "エクアドル",
- "ee": "エストニア",
- "eg": "エジプト",
- "es": "スペイン",
- "fi": "フィンランド",
- "fj": "フィジー",
- "fm": "ミクロネシア連邦",
- "fr": "フランス",
- "gb": "イギリス",
- "gd": "グレナダ",
- "gh": "ガーナ",
- "gm": "ガンビア",
- "gr": "ギリシャ",
- "gt": "グアテマラ",
- "gw": "ギニアビサウ",
- "gy": "ガイアナ",
- "hk": "香港",
- "hn": "ホンジュラス",
- "hr": "クロアチア",
- "hu": "ハンガリー",
- "id": "インドネシア",
- "ie": "アイルランド",
- "il": "イスラエル",
- "in": "インド",
- "is": "アイスランド",
- "it": "イタリア",
- "jm": "ジャマイカ",
- "jo": "ヨルダン",
- "jp": "日本",
- "ke": "ケニア",
- "kg": "キルギス",
- "kh": "カンボジア",
- "kn": "セントクリストファー・ネイビス",
- "kr": "大韓民国",
- "kw": "クウェート",
- "ky": "ケイマン諸島",
- "kz": "カザフスタン",
- "la": "ラオス人民民主共和国",
- "lb": "レバノン",
- "lc": "セントルシア",
- "lk": "スリランカ",
- "lr": "リベリア",
- "lt": "リトアニア",
- "lu": "ルクセンブルク",
- "lv": "ラトビア",
- "md": "モルドバ共和国",
- "mg": "マダガスカル",
- "mk": "北マケドニア",
- "ml": "マリ",
- "mn": "モンゴル国",
- "mo": "マカオ",
- "mr": "モーリタニア",
- "ms": "モントセラト",
- "mt": "マルタ",
- "mu": "モーリシャス",
- "mw": "マラウイ",
- "mx": "メキシコ",
- "my": "マレーシア",
- "mz": "モザンビーク",
- "na": "ナミビア",
- "ne": "ニジェール",
- "ng": "ナイジェリア",
- "ni": "ニカラグア",
- "nl": "オランダ",
- "no": "ノルウェー",
- "np": "ネパール",
- "nz": "ニュージーランド",
- "om": "オマーン",
- "pa": "パナマ",
- "pe": "ペルー",
- "pg": "パプアニューギニア",
- "ph": "フィリピン",
- "pk": "パキスタン",
- "pl": "ポーランド",
- "pt": "ポルトガル",
- "pw": "パラオ",
- "py": "パラグアイ",
- "qa": "カタール",
- "ro": "ルーマニア",
- "ru": "ロシア",
- "sa": "サウジアラビア",
- "sb": "ソロモン諸島",
- "sc": "セーシェル",
- "se": "スウェーデン",
- "sg": "シンガポール",
- "si": "スロベニア",
- "sk": "スロバキア",
- "sl": "シエラレオネ",
- "sn": "セネガル",
- "sr": "スリナム",
- "st": "サントメ・プリンシペ",
- "sv": "エルサルバドル",
- "sz": "スワジランド",
- "tc": "タークス・カイコス諸島",
- "td": "チャド",
- "th": "タイ",
- "tj": "タジキスタン",
- "tm": "トルクメニスタン",
- "tn": "チュニジア",
- "tr": "トルコ",
- "tt": "トリニダード・トバゴ",
- "tw": "台湾",
- "tz": "タンザニア",
- "ua": "ウクライナ",
- "ug": "ウガンダ",
- "us": "米国",
- "uy": "ウルグアイ",
- "uz": "ウズベキスタン",
- "vc": "セントビンセントおよびグレナディーン諸島",
- "ve": "ベネズエラ",
- "vg": "英領ヴァージン諸島",
- "vn": "ベトナム",
- "ye": "イエメン",
- "za": "南アフリカ",
- "zw": "ジンバブエ"
- },
- "OfficeUpdateChannel": {
- "current": "最新チャネル",
- "deferred": "半期エンタープライズ チャンネル",
- "firstReleaseCurrent": "最新チャンネル (プレビュー版)",
- "firstReleaseDeferred": "半期エンタープライズ チャンネル (プレビュー)",
- "monthlyEnterprise": "月次エンタープライズ チャネル",
- "placeHolder": "1 つ選んでください"
- },
- "AppProtection": {
- "allAppTypes": "すべてのアプリの種類を対象にする",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Android 作業プロファイルでのアプリ",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Microsoft Entra 共有モードを使用した Android Enterprise 専用デバイス上のアプリ",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Android オープン ソース プロジェクト ユーザーが関連付けられている アプリ",
- "appsOnAndroidOpenSourceProjectUserless": "Android オープン ソース プロジェクトユーザーレス上のアプリ",
- "appsOnIntuneManagedDevices": "Intune マネージド デバイス上のアプリ",
- "appsOnUnmanagedDevices": "アンマネージド デバイス上のアプリ",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS、Android、Mac",
- "iosAndroidPlatformLabel": "iOS、Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "使用できません",
- "windows10PlatformLabel": "Windows 10 以降",
- "withEnrollment": "登録済み",
- "withoutEnrollment": "未登録"
- },
- "DisplayRoleTypes": {
- "builtInRole": "組み込みロール",
- "customCloudPCRole": "Windows 365 のカスタム ロール",
- "customIntuneRole": "Intune のカスタム ロール",
- "customRole": "カスタム ロール"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} は、1 つ以上のポリシー セットに含まれています。{0} を削除すると、これらのポリシー セットを使用してそれを割り当てることができなくなります。削除しますか?",
- "contentWithError": "{0} は、1 つ以上のポリシー セットに含まれている可能性があります。{0} を削除すると、これらのポリシー セットを使用してそれを割り当てることができなくなります。削除しますか?",
- "header": "この制限を削除しますか?"
- },
- "DeviceLimit": {
- "description": "ユーザーが登録できるデバイスの最大数を指定します。",
- "header": "デバイスの上限数の制限",
- "info": "各ユーザーが登録できるデバイス数を定義します。"
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "1.0 以上でなければなりません。",
- "android": "有効なバージョン番号を入力してください。例: 5.0、5.5.1、6.0.0.1",
- "androidForWork": "有効なバージョン番号を入力してください。例: 5.0、5.1.1",
- "iOS": "有効なバージョン番号を入力してください。例: 9.0、10.0、9.0.2",
- "mac": "有効なバージョン番号を入力してください。例: 10、10.10、10.10.1",
- "min": "下限は {0} 以上にする必要があります",
- "minMax": "最小バージョンは最大バージョン以下にする必要があります。",
- "windows": "10.0 以上である必要があります。8.1 デバイスを許可するには空白のままにします",
- "windowsMobile": "10.0 以上である必要があります。8.1 デバイスを許可するには空白のままにします"
- },
- "allPlatformsBlocked": "すべてのデバイス プラットフォームがブロックされています。プラットフォームの登録を許可して、プラットフォームを構成できるようにしてください。",
- "blockManufacturerPlaceHolder": "製造元の名前",
- "blockManufacturersHeader": "ブロックされた製造元",
- "cannotRestrict": "サポートされていない制限です",
- "configurationDescription": "登録するデバイスで適合する必要のあるプラットフォーム構成の制限を指定します。登録後のデバイスを制限するには、コンプライアンス ポリシーを使用します。バージョンは major.minor.build として定義します。バージョンの制限事項はポータル サイトで登録されたデバイスにのみ適用されます。既定では、Intune はデバイスを個人の所有として分類します。デバイスを会社の所有として分類するには、追加の操作が必要です。",
- "configurationDescriptionLabel": "登録制限の設定に関する詳細情報",
- "configurations": "プラットフォームの構成",
- "deviceManufacturer": "デバイス製造元",
- "header": "デバイスの種類の制限",
- "info": "登録できるプラットフォーム、バージョン、および管理の種類を定義します。",
- "manufacturer": "製造元",
- "max": "最大",
- "maxVersion": "最大バージョン",
- "min": "最小",
- "minVersion": "最小バージョン",
- "newPlatforms": "新しいプラットフォームを許可しました。プラットフォーム構成を更新することをご検討ください。",
- "personal": "個人所有",
- "platform": "プラットフォーム",
- "platformDescription": "次のフラットフォームの登録を許可できます。ブロック プラットフォームのみサポートされません。許可されるプラットフォームは追加の登録制限を指定して構成できます。",
- "platformSettings": "プラットフォームの設定",
- "platforms": "プラットフォームの選択",
- "platformsSelected": "{0} 個のプラットフォームが選択されています",
- "type": "種類",
- "versions": "versions",
- "versionsRange": "最小/最大の許容範囲:",
- "windowsTooltip": "モバイル デバイス管理から登録を制限します。PC エージェントのインストールは制限されません。Windows 10 および Windows 11 のバージョンのみがサポートされています。Windows 8.1 を許可するにはバージョンを空白のままにします。"
- },
- "Priority": {
- "saved": "優先順位の制限が正しく保存されました。"
- },
- "Row": {
- "announce": "優先度: {0}、名前: {1}、割り当て済み: {2}"
- },
- "Table": {
- "deployed": "展開済み",
- "name": "名前",
- "priority": "優先度"
- },
- "Type": {
- "limit": "デバイスの上限数の制限",
- "type": "デバイスの種類の制限"
- },
- "allUsers": "すべてのユーザー",
- "androidRestrictions": "Android の制限",
- "create": "制限を作成",
- "defaultLimitDescription": "これは既定のデバイスの上限数の制限であり、グループ メンバーシップに関係なく、すべてのユーザーに最も低い優先順位で適用されます。",
- "defaultTypeDescription": "これは既定のデバイスの種類の制限であり、グループ メンバーシップに関係なく、すべてのユーザーに最も低い優先順位で適用されます。",
- "defaultWhfbDescription": "これは Windows Hello for Business の既定の構成であり、グループ メンバーシップに関係なく、すべてのユーザーに最も低い優先順位で適用されます。",
- "deleteMessage": "影響を受けるユーザーには、割り当てられている優先度が次に高い制限が適用されます。他の制限が割り当てられていない場合は既定の制限が適用されます。",
- "deleteTitle": "{0} 制限を削除しますか?",
- "descriptionHint": "制限の設定によって特徴づけられる、業務での使用または制限のレベルの短い説明文。",
- "edit": "制限の編集",
- "info": "デバイスは、そのユーザーに割り当てられている優先順位の最も高い登録制限に準拠している必要があります。優先順位を変更するには、デバイスの制限をドラッグします。既定の制限は、どのユーザーでも優先順位が最低であり、ユーザーのいない登録を管理します。既定の制限を編集することはできますが、削除することはできません。",
- "iosRestrictions": "iOS の制限",
- "mDM": "MDM",
- "macRestrictions": "macOS の制限",
- "maxVersion": "最大バージョン",
- "minVersion": "最小バージョン",
- "nameHint": "これは、制限セットを識別するために表示される主属性になります。",
- "noAssignmentsStatusBar": "少なくとも 1 つのグループに制限を割り当てます。[プロパティ] をクリックしてください。",
- "nonAdminForbiddenCreateError": "制限を作成、編集、または削除するには、Intune サービス管理者またはグローバル管理者である必要があります。",
- "nonAdminForbiddenEdit": "制限を編集するには、管理者である必要があります。",
- "notFound": "制限が見つかりません。既に削除されている可能性があります。",
- "personallyOwned": "個人所有のデバイス",
- "restriction": "制限",
- "restrictionLowerCase": "制限",
- "restrictionType": "Restriction Type",
- "selectType": "制限の種類の選択",
- "selectValidation": "プラットフォームを選択してください",
- "typeHint": "デバイスのプロパティを制限するには、[デバイスの種類の制限] を選びます。ユーザーあたりのデバイス数を制限するには、[デバイスの上限数の制限] を選びます。",
- "typeRequired": "制限の種類が必要です。",
- "winPhoneRestrictions": "Windows Phone の制限",
- "windowsECv1Info": "古い登録制限は編集したり優先順位を変更したりすることはできず、削除のみが可能です。",
- "windowsECv2Info": "登録制限をドラッグ アンド ドロップすることで優先順位を付けることができます。以下の既定および事前構成された制限を確認してください。すべての新しい登録制限は、既定および事前構成された制限よりも高い優先順位を持ちます。",
- "windowsRestrictions": "Windows の制限",
- "windowsRestrictionsPreview": "フィルターベースの Windows の制限 (プレビュー)"
- },
- "InstallContextType": {
- "device": "デバイス",
- "deviceContext": "デバイス コンテキスト",
- "user": "ユーザー",
- "userContext": "ユーザー コンテキスト"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "説明",
- "placeholder": "説明を入力します"
- },
- "NameTextBox": {
- "label": "名前",
- "placeholder": "名前の入力"
- },
- "PublisherTextBox": {
- "label": "公開者",
- "placeholder": "パブリッシャーを入力してください"
- },
- "VersionTextBox": {
- "label": "バージョン"
- },
- "headerDescription": "作成した検出および修復スクリプトから新しいカスタム スクリプト パッケージを作成します。"
- },
- "ScopeTags": {
- "headerDescription": "スクリプト パッケージを割り当てるグループを 1 つ以上選択します。"
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "検出スクリプト",
- "placeholder": "入力スクリプト テキスト",
- "requiredValidationMessage": "検出スクリプトを入力してください"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "スクリプト署名チェックを強制"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "このスクリプトをログオンした資格情報を使用して実行する"
- },
- "RemediationScript": {
- "infoBox": "修復スクリプトがないため、このスクリプトは検出専用モードで実行されます。"
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "修復スクリプト",
- "placeholder": "入力スクリプト テキスト"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "64 ビットの PowerShell でスクリプトを実行する"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "スクリプトが無効です。スクリプトで使用されている 1 つまたは複数の文字が無効です。"
- },
- "headerDescription": "お客様が記述したスクリプトからカスタム スクリプト パッケージが作成されます。既定では、スクリプトは割り当てられたデバイスで毎日実行されます。",
- "infoBox": "このスクリプトは読み取り専用です。このスクリプトの一部の設定が無効になっている可能性があります。"
- },
- "title": "カスタム スクリプトの作成",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "間隔",
- "time": "日付と時刻"
- },
- "Interval": {
- "day": "毎日繰り返す",
- "days": "{0} 日おきに繰り返す",
- "hour": "1 時間ごとに繰り返す",
- "hours": "{0} 時間おきに繰り返します",
- "month": "毎月繰り返す",
- "months": "{0} か月おきに繰り返す",
- "week": "毎週繰り返す",
- "weeks": "{0} 週間おきに繰り返す"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{1} {0} (UTC)",
- "withDate": "{1} {0}"
- }
- }
- },
- "Edit": {
- "title": "編集 - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "許可された URL",
- "tooltip": "ユーザーが作業コンテキスト内でアクセスを許可されるサイトを指定します。他のサイトは許可されません。許可/ブロックのどちらかを選択してリストを構成できますが、両方を選択することはできません。"
- },
- "ApplicationProxyRedirection": {
- "header": "アプリケーション プロキシ",
- "title": "アプリケーション プロキシのリダイレクト",
- "tooltip": "アプリ プロキシのリダイレクトを有効にすると、企業リンクとオンプレミスの Web アプリへのアクセスがユーザーに付与されます。"
- },
- "BlockedURLs": {
- "title": "ブロックする URL",
- "tooltip": "ユーザー用にブロックされるサイトを作業コンテキスト内で指定します。他のすべてのサイトは許可されます。許可/ブロックのどちらかを選択してリストを構成できますが、両方を選択することはできません。"
- },
- "Bookmarks": {
- "header": "マネージド ブックマーク",
- "tooltip": "作業コンテキストで Microsoft Edge を使用するときにユーザーが利用できるように、ブックマークされた URL の一覧を入力します。",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "管理対象のホームページ",
- "title": "ホームページのショートカットの URL",
- "tooltip": "Microsoft Edge で新しいタブを開いたときに、検索バーの下に最初のアイコンとしてユーザーに表示される、ホームページのショートカットを構成します。"
- },
- "PersonalContext": {
- "label": "制限付きサイトを個人用コンテキストにリダイレクトする",
- "tooltip": "ユーザーが制限されたサイトを開くために個人のコンテキストに移行することを許可するかどうかを構成します。"
- }
- },
- "BooleanActions": {
- "allow": "許可",
- "block": "ブロック",
- "configured": "構成済み",
- "disable": "無効にする",
- "dontRequire": "必要としない",
- "enable": "有効にする",
- "hide": "非表示",
- "limit": "上限",
- "notConfigured": "構成されていません",
- "require": "必要",
- "show": "表示",
- "yes": "はい"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "オプションの更新プログラムとしてユーザーが利用できるようにする",
- "optionalValue": "オプション",
- "required": "必要な更新プログラムとしてユーザーが利用できるようにする",
- "requiredValue": "必須"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 日",
- "twoDays": "2 日",
- "zeroDays": "0 日"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "概要"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "デバイス、ユーザー、品質更新プログラムのバージョンで検索します。"
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "iOS ソフトウェア更新プロファイルの読み込み失敗"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS 更新プロファイル",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "プロファイル"
- },
- "listLoadError": "iOS ソフトウェア更新プロファイルを読み込めません。後でもう一度お試しください",
- "lowercase": "iOS 更新ポリシー",
- "uppercase": "iOS 更新ポリシー"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "申し訳ございません。Apple に接続して利用可能なバージョンの一覧を取得することができません。後でもう一度試すか、最新のバージョンで続行してください。",
- "latestUpdate": "最新の更新プログラム",
- "noLongerSupported": "選択したバージョンはもうサポートされていません",
- "olderVersionSelected": "以前のバージョンが選択されているため、ソフトウェア更新プログラムの表示を延期するデバイス制限ポリシーを適用して、デバイスが最新バージョンに更新されないようにしてください。",
- "prefix": "iOS または iPadOS のインストール",
- "selectSupported": "Apple でサポートされている更新プログラムのバージョンを選択する",
- "updateToInstall": "インストールする更新プログラム"
- },
- "Schedule": {
- "always": "次のチェックイン時に更新する",
- "duringTimeWindows": "予定時刻中に更新する",
- "header": "ソフトウェア更新プログラムのポリシーがデバイスに割り当てられている場合、既定では、最新の更新プログラムがデバイスのチェックイン時に Intune によって展開されます。代わりに、カスタマイズされた開始時刻と終了時刻で週単位のスケジュールを作成できます。予定時刻外に更新する場合、Intune では予定時刻が終了するまで更新プログラムを展開しません。",
- "infoBalloon": "更新を行うタイミング。スケジュールされた時間中またはスケジュールされた時間外に更新をスケジュールする場合、追加の入力が必要です。",
- "label": "スケジュールの種類",
- "outsideActiveHours": "アクティブ時間外での更新 (レガシ)",
- "outsideTimeWindows": "予定時刻外に更新する",
- "timeWindow": "時間枠",
- "timeZone": "タイム ゾーン",
- "title": "ポリシー スケジュール設定の更新:",
- "weekly": "週単位のスケジュール",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "更新時にデバイスにインストールする iOS または iPadOS のバージョンです。",
- "label": "インストールするバージョンの選択"
- },
- "header": "割り当てられたデバイスに最新の iOS/iPadOS の更新プログラムを自動的にインストールするプロファイルを作成します。これらの設定は、ソフトウェア更新プログラムを展開する方法とタイミングを決定します。このプロファイルでは、ユーザーによる OS の手動更新は禁止されていません (デバイス構成制限ポリシーを使用して最大 90 日間禁止できます)。更新プログラムは、監督されているデバイスにのみ適用されます。",
- "notAvailable": "該当なし"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "表示する iOS 更新ポリシーはありません",
- "macOsUpdates": "表示する macOS ソフトウェアの更新ポリシーはありません",
- "windowsUpdates": "Windows 10 以降向けに表示する更新リングがありません。"
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "デバイス名",
- "deviceUpdateStatus": "デバイスの更新状態",
- "lastUpdated": "最終更新日時",
- "osVersion": "OS のバージョン",
- "userPrincipalName": "ユーザー名"
- },
- "maximumOSVersionFilter": "最大 OS バージョン",
- "minimumOSVersionFilter": "最小 OS バージョン",
- "noData": "表示するデータはありません",
- "searchBoxPlaceholder": "デバイス名、ユーザー名または OS バージョンで検索",
- "title": "macOS デバイス用のアカウントの概要"
- },
- "Category": {
- "configurationDataFile": "構成データ ファイル",
- "critical": "重大",
- "firmware": "ファームウェア",
- "other": "その他"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "最終更新",
- "successfulUpdateCount": "正常に展開された更新プログラム",
- "totalUpdateCount": "展開された更新プログラムの総数",
- "updateCategory": "更新のカテゴリ",
- "updateCategoryStatus": "カテゴリの状態を更新する"
- },
- "noData": "表示するデータはありません"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "macOS ソフトウェア更新プロファイルの読み込み失敗"
- }
- },
- "State": {
- "available": "空き領域",
- "commandFailed": "コマンドが失敗しました",
- "downloadFailed": "ダウンロードに失敗しました",
- "downloadInsufficientNetwork": "ダウンロードのためのネットワークが不足しています",
- "downloadInsufficientPower": "ダウンロードのための電力が不足しています",
- "downloadInsufficientSpace": "ダウンロードのための空き領域が不足しています",
- "downloaded": "ダウンロード済み",
- "downloading": "ダウンロードしています",
- "idle": "アイドル",
- "installFailed": "インストール失敗",
- "installInsufficientPower": "インストールのための電力が不足しています",
- "installInsufficientSpace": "インストールのための空き領域が不足しています",
- "installing": "インストール中",
- "scheduled": "期限付き",
- "success": "成功",
- "unknown": "不明"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "最終更新",
- "updateName": "更新プログラム名",
- "updateStatus": "更新ステータス",
- "version": "バージョン"
- },
- "noData": "表示するデータはありません",
- "searchBoxPlaceholder": "更新プログラムの名前またはバージョンで検索"
- },
- "SummaryBlade": {
- "subtitle": "macOS 更新プロファイル",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "プロファイル"
- },
- "error": "エラー",
- "errorOrErrors": "エラー",
- "errors": "エラー",
- "listLoadError": "macOS ソフトウェア更新プロファイルを読み込めません。後でもう一度お試しください",
- "lowercase": "macOS 更新ポリシー",
- "other": "その他",
- "subtitle": "MacOS ソフトウェア更新プログラム",
- "upToDate": "最新",
- "uppercase": "macOS 更新ポリシー"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "後でもう一度お試しください",
- "title": "{0} を削除できませんでした。"
- },
- "LoadAllConfigurationFailed": {
- "description": "後でもう一度お試しください"
- },
- "LoadConfigurationFailed": {
- "description": "後でもう一度お試しください",
- "title": "{0} を読み込めませんでした"
- },
- "idWrongFormat": "プロファイルに指定された ID は、予期された形式ではありません。"
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "少なくとも 1 つの時間枠を選択してください",
- "tooMany": "構成できる時間枠は最大 20 個です"
- }
- },
- "endDay": "終了日",
- "endTime": "終了時刻",
- "startDay": "開始日",
- "startTime": "開始時刻",
- "timeWindowError": "少なくとも 1 時間の長さの時間帯を選択してください。"
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Windows 10 以降向けの更新リング プロファイルを読み込めませんでした。"
- }
- },
- "SummaryBlade": {
- "subtitle": "Windows 10 以降向け更新リング",
- "title": "Windows Update for Business"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 以降",
- "title": "Windows 10 以降向け更新リング"
- },
- "listLoadError": "Windows 10 以降向けの更新リング プロファイルを読み込めません。後でもう一度お試しください",
- "lowercase": "更新リング",
- "uppercase": "更新リング"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "ポリシー設定の更新",
- "updateRingSettings": "更新リングの設定"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "{0} の生成",
- "edit": "{0} の編集"
- }
- },
- "notScannedYet": "まだスキャンされていません",
- "outOfDateIosDevices": "古い iOS デバイス"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "デバイスの制限 (デバイス所有者)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS 更新ポリシー"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "指定の値に等しい",
+ "greaterThan": "次の値より大きい",
+ "greaterThanOrEqualTo": "以上",
+ "lessThan": "より小さい",
+ "lessThanOrEqualTo": "以下",
+ "notEqualTo": "次の値に等しくない"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "スクリプトの署名の確認を強制し、スクリプトをサイレント実行する",
+ "enforceSignatureCheckTooltip": "スクリプトに信頼できる発行元の署名があることを確認するには、[はい] を選択します。署名がある場合、スクリプトは警告やプロンプトを表示せずに実行されます。スクリプトはブロックされずに実行されます。[いいえ] (既定) を選択すると、署名の検証なしで、エンドユーザーの確認に基づいてスクリプトが実行されます。",
+ "header": "カスタム検出スクリプトを使用する",
+ "runAs32Bit": "64 ビット クライアントで 32 ビット プロセスとしてスクリプトを実行する",
+ "runAs32BitTooltip": "[はい] を選択すると、64 ビット クライアント上でスクリプトは 32 ビット プロセス内で実行されます。[いいえ] (既定) を選択すると、64 ビット クライアント上でスクリプトは 64 ビット プロセス内で実行されます。32 ビット クライアントでは、スクリプトは 32 ビット プロセス内で実行されます。",
+ "scriptContent": "スクリプトの内容",
+ "scriptFile": "スクリプト ファイル",
+ "scriptFileNotSelectedValidation": "スクリプト ファイルが選択されていません。",
+ "scriptFileTooltip": "クライアント上でアプリのプレゼンスを検出する PowerShell スクリプトを選択します。アプリは、スクリプトが終了コード 0 値を返し、かつ STDOUT に文字列値を書き込んだ場合に検出されます。",
+ "scriptSizeLimitValidation": "検出スクリプトが許可されている最大サイズを超えています。これを解決するには、検出スクリプトのサイズを小さくします。"
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "作成日",
+ "dateModified": "変更日",
+ "doesNotExist": "ファイルまたはフォルダーが存在しません",
+ "fileOrFolderExists": "ファイルまたはフォルダーが存在する",
+ "sizeInMB": "サイズ (MB)",
+ "version": "文字列 (バージョン)"
+ },
+ "associatedWith32Bit": "64 ビット クライアント上で 32 ビット アプリに関連付ける",
+ "associatedWith32BitTooltip": "[はい] を選択すると、64 ビット クライアント上ですべてのパス環境変数が 32 ビットのコンテキストに展開されます。[いいえ] (既定) を選択すると、64 ビット クライアント上ですべてのパス変数が 64 ビットのコンテキストに展開されます。32 ビットのクライアントでは、常に 32 ビットのコンテキストが使用されます。",
+ "detectionMethod": "検出方法",
+ "detectionMethodTooltip": "アプリのプレゼンスを検証するために使用する検出方法の種類を選択します。",
+ "fileOrFolder": "ファイルまたはフォルダー",
+ "fileOrFolderToolTip": "検出するファイルまたはフォルダーです。",
+ "operator": "演算子",
+ "operatorTooltip": "比較の検証に使用する検出方法の演算子を選択します。",
+ "path": "パス",
+ "pathTooltip": "検出するファイルまたはフォルダーを含んでいるフォルダーの完全パス。",
+ "value": "値",
+ "valueTooltip": "選択した検出方法に一致する値を選択します。日付の検出方法はローカル時刻で入力してください。"
+ },
+ "GridColumns": {
+ "pathOrCode": "パス/コード",
+ "type": "種類"
+ },
+ "MsiRule": {
+ "operator": "演算子",
+ "operatorTooltip": "MSI 製品のバージョン検証の比較演算子を選択します。",
+ "productCode": "MSI 製品コード",
+ "productCodeTooltip": "アプリの有効な MSI 製品コードです。",
+ "productVersion": "値",
+ "productVersionCheck": "MSI 製品のバージョンの確認",
+ "productVersionCheckTooltip": "MSI 製品コードだけでなく MSI 製品バージョンも確認するには、[はい] を選択します。",
+ "productVersionTooltip": "アプリの MSI 製品バージョンを入力します。"
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "整数値を比較",
+ "keyDoesNotExist": "キーがありません",
+ "keyExists": "キーが存在します",
+ "stringComparison": "文字列を比較",
+ "valueDoesNotExist": "値が存在しない",
+ "valueExists": "値が存在する",
+ "versionComparison": "バージョンの比較"
+ },
+ "associatedWith32Bit": "64 ビット クライアント上で 32 ビット アプリに関連付ける",
+ "associatedWith32BitTooltip": "64 ビット クライアント上で 32 ビットのレジストリを検索するには、[はい] を選択します。[いいえ] (既定) を選択すると、64 ビット クライアント上で 64 ビットのレジストリが検索されます。32 ビットのクライアントでは、常に 32 ビットのレジストリが検索されます。",
+ "detectionMethod": "検出方法",
+ "detectionMethodTooltip": "アプリのプレゼンスを検証するために使用する検出方法の種類を選択します。",
+ "keyPath": "キー パス",
+ "keyPathTooltip": "検出する値を含むレジストリ エントリの完全なパス。",
+ "operator": "演算子",
+ "operatorTooltip": "比較の検証に使用する検出方法の演算子を選択します。",
+ "value": "値",
+ "valueName": "値の名前",
+ "valueNameTooltip": "検出するレジストリ値の名前。",
+ "valueTooltip": "選択した検出方法に一致する値を選択します。"
+ },
+ "RuleTypeOptions": {
+ "file": "ファイル",
+ "mSI": "MSI",
+ "registry": "レジストリ"
+ },
+ "gridAriaLabel": "検出規則",
+ "header": "このアプリのプレゼンスを示す規則を作成します。",
+ "noRulesSelectedPlaceholder": "規則は指定されていません。",
+ "ruleTableLimit": "検出規則は 25 個まで追加できます",
+ "ruleType": "規則の種類",
+ "ruleTypeTooltip": "追加する検出ルールの種類を選択します。"
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "カスタム検出スクリプトを使用する",
+ "manual": "検出規則を手動で構成する"
+ },
+ "bladeTitle": "検出規則",
+ "header": "アプリのプレゼンスを検出するために使用されるアプリ固有のルールを構成します。",
+ "rulesFormat": "規則の形式",
+ "rulesFormatTooltip": "検出規則を手動で構成するか、またはカスタム スクリプトを使用してアプリのプレゼンスを検出するかを選択します。",
+ "selectorLabel": "検出規則"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "ユーザーの代理で Microsoft ソフトウェアライセンス条項に同意する",
"appSuiteConfigurationLabel": "アプリ スイートの構成",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} 個の言語が選択済み",
"xmlConfigurationLabel": "XML 構成"
},
- "Filters": {
- "ruleSyntax": "規則の構文",
- "filters": "フィルター"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "ユーザーに設定の変更を許可する",
- "tooltip": "ユーザーに設定の変更を許可するかどうかを指定します。"
- },
- "AllowWorkAccounts": {
- "title": "職場または学校アカウントのみ許可する",
- "tooltip": "この設定を有効にすると、ユーザーは Outlook での個人用のメールおよびストレージ アカウントの追加ができません。ユーザーが Outlook に追加された個人用アカウントを持っている場合は、個人用アカウントを削除するように求められます。ユーザーが個人用アカウントを削除しない場合は、職場または学校アカウントを追加できません。"
- },
- "BlockExternalImages": {
- "title": "外部画像をブロックする",
- "tooltip": "外部画像のブロックを有効にすると、アプリはメッセージの本文に埋め込まれているインターネット上でホストされている画像をダウンロードしません。設定で構成しない場合、既定のアプリ設定はオフになっています。"
- },
- "ConfigureEmail": {
- "title": "メール アカウント設定を構成する"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "既定のアプリ署名では、アプリでメッセージを作成中に、既定の署名に「Outlook for Android の入手」を使用するかどうかを示します。設定がオフに構成されている場合、既定の署名は使用されませんが、ユーザー独自の署名を追加することができます。\r\n\r\n[未構成] に設定すると、既定のアプリ設定がオンになります。",
- "iOS": "既定のアプリ署名では、アプリでメッセージを作成中に、既定の署名に「Outlook for iOSの入手」を使用するかどうかを示します。設定がオフに構成されている場合、既定の署名は使用されませんが、ユーザー独自の署名を追加することができます。\r\n\r\n[未構成] に設定すると、既定のアプリ設定がオンになります。"
- },
- "title": "既定のアプリ署名"
- },
- "OfficeFeedReplies": {
- "title": "Discover フィード",
- "tooltip": "Discover フィードは、最も頻繁にアクセスされている Office ファイルを明らかにします。既定では、Delve がユーザーに対して有効になっているときに、このフィードが有効になります。未構成として設定した場合、既定のアプリ設定はオンに設定されます。"
- },
- "OrganizeMailByThread": {
- "title": "スレッド別にメールを整理",
- "tooltip": "Outlook の既定の動作では、電子メールの会話がスレッド形式の会話ビューにまとめられます。この設定を無効にすると、Outlook で各メールが個別に表示され、スレッドごとにグループ化されません。"
- },
- "PlayMyEmails": {
- "title": "メールの再生",
- "tooltip": "アプリでは、メールの再生機能は既定では有効になっていませんが、受信トレイ内のバナーを介して対象ユーザーに宣伝されます。オフに設定すると、この機能はアプリ内の対象ユーザーに宣伝されなくなります。ユーザーは、この機能がオフに設定されている場合でも、アプリ内からメールの再生を手動で有効にすることを選択できます。未構成として設定した場合、既定のアプリ設定はオンになり、機能が対象ユーザーに宣伝されます。"
- },
- "SuggestedReplies": {
- "title": "返信の提案",
- "tooltip": "Outlook でメッセージを開くと、メッセージの下に返信が提案される場合があります。提案された返信を選択し、編集してから送信できます。"
- },
- "SyncCalendars": {
- "title": "予定表の同期",
- "tooltip": "ユーザーが Outlook カレンダーをネイティブのカレンダー アプリとデータベースと同期できるようにするかどうかを構成します。"
- },
- "TextPredictions": {
- "title": "予測入力",
- "tooltip": "Outlook では、メッセージを作成するときに、単語やフレーズを候補として表示できます。Outlook で候補が提示されたら、スワイプして受け入れます。未構成として設定されている場合、既定のアプリ設定は [オン] に設定されます。"
- },
- "ThemesEnabled": {
- "title": "テーマの有効化",
- "tooltip": "ユーザーがカスタム ビジュアル テーマを使用できるかどうかを指定します。"
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS デバイス"
- },
- "ManagedDesktop": {
- "adminContacts": "管理者の連絡先",
- "appPackaging": "アプリのパッケージ化",
- "autopatchGroups": "Autopatch グループ",
- "devices": "デバイス",
- "featureEnablement": "機能のアクティブ化",
- "feedback": "フィードバック",
- "gettingStarted": "はじめに",
- "messages": "メッセージ",
- "onlineResources": "オンライン リソース",
- "policyHealth": "ポリシーの正常性",
- "policyHealthPreview": "ポリシーの正常性 (プレビュー)",
- "releaseManagement": "リリース管理",
- "serviceRequests": "サービス要求",
- "settings": "設定",
- "supportRequests": "サポート リクエスト",
- "tenantEnrollment": "テナント登録",
- "tenantManagement": "テナント管理"
- },
- "actions": "コンプライアンス非対応に対するアクション",
- "advancedExchangeSettings": "Exchange Online の設定",
- "advancedThreatProtection": "Microsoft Defender for Endpoint",
- "allApps": "すべてのアプリ",
- "allDevices": "すべてのデバイス",
- "androidFotaDeployments": "Android FOTA デプロイ",
- "appBundles": "アプリ バンドル",
- "appCategories": "アプリのカテゴリ",
- "appConfigPolicies": "アプリ構成ポリシー",
- "appConfigurationStatus": "アプリ構成の状態",
- "appInstallStatus": "アプリ インストールの状態",
- "appLicences": "アプリ ライセンス",
- "appProtectionPolicies": "アプリ保護ポリシー",
- "appProtectionStatus": "アプリ保護の状態",
- "appSelectiveWipe": "アプリの選択的ワイプ",
- "appleVppTokens": "Apple VPP トークン",
- "apps": "アプリ",
- "assign": "割り当て",
- "assignedPermissions": "割り当てられたアクセス許可",
- "assignedRoles": "割り当てられたロール",
- "autopilotDeploymentReport": "Autopilot Deployment (プレビュー)",
- "autopilotDeploymentReportV2": "Autopilot 展開 2.0 (プレビュー)",
- "brandingAndCustomization": "カスタマイズ",
- "cartProfiles": "カート プロファイル",
- "certificateConnectors": "証明書のコネクタ",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "クラウドに接続されたデバイス (プレビュー)",
- "cloudPcActions": "クラウド PC アクション (プレビュー)",
- "cloudPcMaintenanceWindows": "クラウド PC のメンテナンス期間 (プレビュー)",
- "compliancePolicies": "コンプライアンス ポリシー",
- "complianceScriptManagement": "スクリプト",
- "complianceScriptManagementPreview": "スクリプト (プレビュー)",
- "complianceSettings": "コンプライアンス ポリシー設定",
- "conditionStatements": "条件ステートメント",
- "conditions": "場所",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "構成プロファイル",
- "configurationScripts": "構成スクリプト",
- "connectorsAndTokens": "コネクタとトークン",
- "corporateDeviceIdentifiers": "業務用デバイスの ID",
- "customAttributes": "カスタム属性",
- "customNotifications": "カスタム通知",
- "deploymentSettings": "デプロイの設定",
- "derivedCredentials": "派生資格情報",
- "deviceActions": "デバイス アクション",
- "deviceCategories": "デバイス カテゴリ",
- "deviceCleanUp": "デバイスのクリーンアップ ルール",
- "deviceEnrollmentManagers": "デバイス登録マネージャー",
- "deviceExecutionStatus": "デバイスの状態",
- "deviceLimitEnrollmentRestrictions": "登録デバイスの上限数制限",
- "deviceTypeEnrollmentRestrictions": "登録デバイスのプラットフォームの制限",
- "devices": "デバイス",
- "discoveredApps": "検出されたアプリ",
- "edgePolicies": "Microsoft Edge のポリシー",
- "embeddedSIM": "eSIM 携帯ネットワーク プロファイル (プレビュー)",
- "enrollDevices": "デバイスの登録",
- "enrollmentFailures": "登録エラー",
- "enrollmentNotifications": "登録の通知 (プレビュー)",
- "enrollmentRestrictions": "登録制限",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange サービス コネクタ",
- "failuresForCumulativeQualityUpdates": "Windows の累積的な品質更新プログラムのエラー",
- "failuresForDriverUpdates": "Windows ドライバー更新プログラムのエラー",
- "failuresForFeatureUpdates": "機能の更新エラー",
- "failuresForQualityUpdates": "Windows の優先更新プログラムのエラー",
- "featureFlighting": "機能フライティング",
- "featureUpdateDeployments": "Windows 10 以降向け機能更新プログラム",
- "flighting": "フライティング",
- "fotaUpdate": "ファームウェアの無線アップデート",
- "groupPolicy": "管理用テンプレート",
- "groupPolicyAnalytics": "グループ ポリシー分析",
- "helpSupport": "ヘルプとサポート",
- "helpSupportReplacement": "ヘルプとサポート ({0})",
- "iOSAppProvisioning": "iOS アプリ プロビジョニング プロファイル",
- "incompleteUserEnrollments": "不完全なユーザー登録",
- "iosUpdates": "iOS または iPadOS の更新ポリシー",
- "legacyPcManagement": "レガシ PC 管理",
- "macOSSoftwareUpdate": "macOS の更新ポリシー (プレビュー)",
- "macOSSoftwareUpdateAccountSummaries": "MacOS デバイスのインストール状態",
- "macOSSoftwareUpdateCategorySummaries": "ソフトウェア更新プログラムの概要",
- "macOSSoftwareUpdateStateSummaries": "更新プログラム",
- "managedGooglePlay": "マネージド Google Play",
- "msfb": "ビジネス向け Microsoft ストア",
- "myPermissions": "アクセス許可",
- "notifications": "通知",
- "officeApps": "Office アプリ",
- "officeProPlusPolicies": "Office アプリのポリシー",
- "onPremise": "オンプレミス",
- "onPremisesConnector": "Exchange ActiveSync のオンプレミス コネクタ",
- "onPremisesDeviceAccess": "Exchange ActiveSync デバイス",
- "onPremisesManageAccess": "Exchange On-Premises のアクセス",
- "outOfDateIosDevices": "iOS デバイスのインストール エラー",
- "overview": "概要",
- "partnerDeviceManagement": "パートナー デバイスの管理",
- "perUpdateRingDeploymentState": "更新プログラムごとのリングの展開の状態",
- "permissions": "アクセス許可",
- "platformApps": "{0} のアプリ",
- "platformDevices": "{0} デバイス",
- "platformEnrollment": "{0} 登録",
- "policies": "ポリシー",
- "profiles": "プロファイル",
- "properties": "プロパティ",
- "reports": "レポート",
- "retireNoncompliantDevices": "準拠していないデバイスの廃止",
- "retireNoncompliantDevicesPreview": "準拠していないデバイスの廃止 (プレビュー)",
- "role": "ロール",
- "scriptManagement": "スクリプト",
- "securityBaselines": "セキュリティのベースライン",
- "serviceToServiceConnector": "Exchange Online Connector",
- "servicenowConnector": "ServiceNow コネクタ",
- "shellScripts": "シェル スクリプト",
- "teamViewerConnector": "TeamViewer コネクタ",
- "telecomeExpenseManagement": "通信費管理",
- "tenantAdmin": "テナント管理",
- "tenantAdministration": "テナント管理",
- "termsAndConditions": "使用条件",
- "titles": "タイトル",
- "troubleshoot": "トラブルシューティング",
- "troubleshootSupport": "トラブルシューティング + サポート",
- "user": "ユーザー",
- "userExecutionStatus": "ユーザーの状態",
- "wdacSupplementalPolicies": "S モードの補足ポリシー",
- "win32CatalogUpdateApp": "Enterprise App Management アプリの更新プログラム",
- "win32CatalogUpdateAppInPreview": "Windows (Win32) カタログ アプリの更新プログラム (プレビュー)",
- "windows10DriverUpdate": "Windows 10 以降向けドライバー更新プログラム",
- "windows10QualityUpdate": "Windows 10 以降向け品質更新プログラム",
- "windows10UpdateRings": "Windows 10 以降向け更新リング",
- "windows10XPolicyFailures": "Windows 10X のポリシー エラー",
- "windows365PartnerConnector": "Windows 365 パートナー コネクタ",
- "windowsDiagnosticData": "Windows データ",
- "windowsEnterpriseCertificate": "Windows Enterprise 証明書",
- "windowsManagement": "スクリプト",
- "windowsSideLoadingKeys": "Windows サイドローディング キー",
- "windowsSymantecCertificate": "Windows DigiCert 証明書",
- "windowsThreatReport": "脅威エージェントの状態"
- },
- "ScopeTypes": {
- "allDevices": "すべてのデバイス",
- "allUsers": "すべてのユーザー",
- "allUsersAndDevices": "すべてのユーザーとすべてのデバイス",
- "selectedGroups": "選択したグループ"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search (既定)",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype for Business",
- "oneDrive": "OneDrive デスクトップ",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone と iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "未サポート",
+ "supportEnding": "サポート終了間近",
+ "supported": "サポートあり"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "既定",
- "header": "優先度の更新",
- "postponed": "延期",
- "priority": "高優先度"
- },
- "AutoUpdateSupersededApps": {
- "label": "自動更新",
- "sublabel": "置き換えられたアプリをユーザーがポータル サイトからインストールした場合は、置き換えるアプリをインストールする必要があります。"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "バックグラウンド",
- "displayText": "{0} でのコンテンツ ダウンロード",
- "foreground": "フォアグラウンド",
- "header": "配信の最適化の優先度"
- },
- "RestartGracePeriod": {
- "allowSnooze": "ユーザーが再起動の通知を一時停止できるようにする",
- "countdownDialog": "再起動が発生する前に再起動のカウントダウン ダイアログ ボックスが表示されるタイミングを選択します (分)",
- "durationInMinutes": "デバイス再起動の猶予期間 (分)",
- "snoozeDurationInMinutes": "一時停止の期間を選択します (分)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "タイム ゾーン",
- "local": "デバイスのタイム ゾーン",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "日時",
- "deadlineTimeColumnLabel": "インストールの期限",
- "deadlineTimeDatePickerErrorMessage": "選択した日付は利用可能な日付よりも後である必要があります",
- "deadlineTimeLabel": "アプリのインストール期限",
- "defaultTime": "直ちに",
- "infoText": "このアプリケーションは、次の使用可能時間を指定しない限り、デプロイ後すぐに利用できるようになります。これが必須のアプリケーションの場合は、インストールの期限を指定できます。",
- "specificTime": "特定の日付と時刻",
- "startTimeColumnLabel": "可用性",
- "startTimeDatePickerErrorMessage": "選択した日付は、期限よりも前にする必要があります",
- "startTimeLabel": "アプリの可用性"
- },
- "restartGracePeriodHeader": "再起動の猶予期間",
- "restartGracePeriodLabel": "デバイス再起動の猶予期間",
- "summaryTitle": "エンド ユーザー エクスペリエンス"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "選択した要件としてのファイルまたはフォルダー。",
- "pathToolTip": "検出するファイルまたはフォルダーの完全なパス。",
- "property": "プロパティ",
- "valueToolTip": "選択した検出方法に一致する要件値を選択します。日付と時刻の要件は、現地の形式で入力してください。"
- },
- "GridColumns": {
- "pathOrScript": "パス/スクリプト",
- "type": "種類"
- },
- "Registry": {
- "keyPath": "キー パス",
- "keyPathTooltip": "必要な値を含むレジストリ エントリの完全なパス。",
- "operator": "演算子",
- "operatorTooltip": "比較演算子を選択します。",
- "registryRequirement": "レジストリ キーの要件",
- "registryRequirementTooltip": "レジストリ キーの要件の比較を選択します。",
- "valueName": "値の名前",
- "valueNameTooltip": "必要なレジストリ値の名前。"
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "推奨される全てのドライバー更新プログラムを自動的に承認する",
+ "manual": "ドライバー更新プログラムを手動で承認して展開する"
+ },
+ "BulkActions": {
+ "button": "一括処理"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "承認メソッド:"
},
- "RequirementTypeOptions": {
- "fileType": "ファイル",
- "registry": "レジストリ",
- "script": "スクリプト"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "ブール値",
- "dateTime": "日時",
- "float": "浮動小数点",
- "integer": "整数",
- "string": "文字列",
- "version": "バージョン"
- },
- "duplicateName": "スクリプト名 {0} は既に使用されています。別の名前を指定してください。",
- "enforceSignatureCheck": "スクリプト署名チェックを強制",
- "enforceSignatureCheckTooltip": "スクリプトに信頼できる発行元の署名があることを確認するには、[はい] を選択します。署名がある場合、スクリプトは警告やプロンプトなしで実行されます。スクリプトはブロックされずに実行されます。[いいえ] (既定) を選択すると、署名の検証なしで、エンドユーザーの確認に基づいてスクリプトが実行されます。",
- "loggedOnCredentials": "このスクリプトをログオンしたユーザーの資格情報を使用して実行する",
- "loggedOnCredentialsTooltip": "サインインしたデバイスの資格情報を使用してスクリプトを実行します。",
- "operatorTooltip": "要件の比較演算子を選択します。",
- "requirementMethod": "出力データの型を選択する",
- "requirementMethodTooltip": "検出の一致の要件を特定する際に使用するデータ型を選択します。",
- "scriptContent": "スクリプトの内容",
- "scriptFile": "スクリプト ファイル",
- "scriptFileTooltip": "クライアント上でアプリのプレゼンスを検出する PowerShell スクリプトを選択します。アプリが検出されると、要件プロセスにより、終了コード 0 値が指定され、STDOUT に文字列値が書き込まれます。",
- "scriptName": "スクリプト名",
- "value": "値",
- "valueTooltip": "選択した検出方法に一致する要件値を選択します。日付と時刻の要件は、現地の形式で入力してください。"
+ "DeploymentDeferralInDays": {
+ "label": "後日、更新プログラムを利用できるようにする",
+ "units": "(日)",
+ "value": "{0} 日"
+ },
+ "DriverAction": {
+ "header": "以下のアクションを選択します。",
+ "label": "ドライバー アクション",
+ "placeholder": "アクションを選択します"
},
- "bladeTitle": "要件規則の追加",
- "createRequirementHeader": "要件を作成します。",
- "header": "追加の要件規則を構成する",
- "label": "追加の要件規則",
- "noRequirementsSelectedPlaceholder": "要件は指定されていません。",
- "requirementType": "要件の種類",
- "requirementTypeTooltip": "要件の検証方法を特定するために使用する検出方法の種類を選択してください。"
- },
- "architectures": "オペレーティング システムのアーキテクチャ",
- "architecturesTooltip": "アプリのインストールに必要なアーキテクチャを選択します。",
- "bladeTitle": "必要条件",
- "diskSpace": "必要なディスク領域 (MB)",
- "diskSpaceTooltip": "アプリをインストールするためにシステム ドライブに必要な空きディスク領域です。",
- "header": "アプリをインストールする前にデバイスが満たす必要のある要件を指定します:",
- "maximumTextFieldValue": "値は、{0} 以下である必要があります。",
- "minimumCpuSpeed": "必要な最小 CPU 速度 (MHz)",
- "minimumCpuSpeedTooltip": "アプリのインストールに必要な最小 CPU 速度です。",
- "minimumLogicalProcessors": "必要な論理プロセッサの最小数",
- "minimumLogicalProcessorsTooltip": "アプリのインストールに必要な論理プロセッサの最小数です。",
- "minimumOperatingSystem": "最低限のオペレーティング システム",
- "minimumOperatingSystemTooltip": "アプリのインストールに必要な最小オペレーティング システムを選択します。",
- "minumumTextFieldValue": "値は、{0} 以上である必要があります。",
- "physicalMemory": "必要な物理メモリ (MB)",
- "physicalMemoryTooltip": "アプリのインストールに必要な物理メモリ (RAM) です。",
- "selectorLabel": "必要条件",
- "validNumber": "有効な数値を入力してください。"
- },
- "PolicySet": {
- "appManagement": "アプリケーション管理",
- "assignments": "割り当て",
- "basics": "基本",
- "deviceEnrollment": "デバイスの登録",
- "deviceManagement": "デバイス管理",
- "scopeTags": "スコープ タグ",
- "appConfigurationTitle": "アプリ構成ポリシー",
- "appProtectionTitle": "アプリ保護ポリシー",
- "appTitle": "アプリ",
- "iOSAppProvisioningTitle": "iOS アプリ プロビジョニング プロファイル",
- "deviceLimitRestrictionTitle": "デバイスの上限数の制限",
- "deviceTypeRestrictionTitle": "デバイスの種類の制限",
- "enrollmentStatusSettingTitle": "登録ステータ スページ",
- "windowsAutopilotDeploymentProfileTitle": "Windows Autopilot Deployment プロファイル",
- "deviceComplianceTitle": "デバイス コンプライアンス ポリシー",
- "deviceConfigurationTitle": "デバイス構成プロファイル",
- "powershellScriptTitle": "PowerShell スクリプト"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "含まれているドライバー"
+ },
+ "SelectDrivers": {
+ "header": "一括アクションに含めるドライバーを選択します"
+ },
+ "SelectDriversToInclude": {
+ "button": "含めるドライバーを選択します"
+ },
+ "SelectLessDrivers": {
+ "validation": "最大 100 個のドライバーを選択できます"
+ },
+ "SelectMoreDrivers": {
+ "validation": "少なくとも 1 個のドライバーを選択してください"
+ },
+ "SelectedDrivers": {
+ "label": "選択したドライバー"
+ },
+ "availabilityDate": "Windows Update で利用可能にする",
+ "bladeTitle": "Windows 10 以降のドライバー更新プログラム (プレビュー)",
+ "lastSync": "前回の同期:",
+ "lastSyncDefaultText": "初期インベントリ コレクションが保留中です",
+ "loadError": "読み込みに失敗しました!"
+ },
+ "DriverStatus": {
+ "approved": "承認済み",
+ "declined": "否認済み",
+ "export": "推奨されるドライバーをエクスポートしています",
+ "needsReview": "レビューが必要です",
+ "paused": "一時停止済み"
+ },
+ "DriversToReview": {
+ "text": "{0} して確認する"
+ },
+ "Subtitle": {
+ "automatic": "ドライバー更新プログラムの自動承認ポリシー",
+ "manual": "ドライバー更新プログラムの手動承認ポリシー"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "推奨",
- "CountryNames": {
- "countryNameNR": "ナウル",
- "countryNameBH": "バーレーン",
- "countryNameZA": "南アフリカ",
- "countryNameJO": "ヨルダン",
- "countryNameSD": "スーダン",
- "countryNameNU": "ニウエ",
- "countryNameCZ": "チェコ共和国",
- "countryNameLT": "リトアニア",
- "countryNameTK": "トケラウ諸島",
- "countryNameEC": "エクアドル",
- "countryNameVU": "バヌアツ",
- "countryNameUG": "ウガンダ",
- "countryNameLI": "リヒテンシュタイン",
- "countryNameHK": "香港特別行政区",
- "countryNameGH": "ガーナ",
- "countryNameSA": "サウジアラビア",
- "countryNamePG": "パプアニューギニア",
- "countryNameBW": "ボツワナ",
- "countryNameDG": "ディエゴ ガルシア",
- "countryNameIN": "インド",
- "countryNameHN": "ホンジュラス",
- "countryNameRO": "ルーマニア",
- "countryNameKZ": "カザフスタン",
- "countryNameLC": "セントルシア",
- "countryNameGE": "ジョージア",
- "countryNameTT": "トリニダード・トバゴ",
- "countryNameMP": "北マリアナ諸島",
- "countryNameMV": "モルディブ",
- "countryNameFI": "フィンランド",
- "countryNameNO": "ノルウェイ",
- "countryNameEE": "エストニア",
- "countryNameVE": "ベネズエラ",
- "countryNameUZ": "ウズベキスタン",
- "countryNameME": "モンテネグロ",
- "countryNameTJ": "タジキスタン",
- "countryNameAW": "アルバ",
- "countryNameFR": "フランス",
- "countryNameOM": "オマーン",
- "countryNameAO": "アンゴラ",
- "countryNameIT": "イタリア",
- "countryNameAZ": "アゼルバイジャン",
- "countryNameKG": "キルギス",
- "countryNameWF": "ウォリス・フツナ",
- "countryNameTL": "ティモール・レステ",
- "countryNameFK": "フォークランド諸島",
- "countryNameGY": "ガイアナ",
- "countryNameSS": "南スーダン",
- "countryNameMM": "ミャンマー",
- "countryNameHT": "ハイチ",
- "countryNameSY": "シリア",
- "countryNameMD": "モルドバ",
- "countryNameVC": "セントビンセント及びグレナディーン諸島",
- "countryNameID": "インドネシア",
- "countryNameRE": "レユニオン",
- "countryNameER": "エリトリア",
- "countryNameMK": "北マケドニア",
- "countryNameTG": "トーゴ",
- "countryNamePF": "仏領ポリネシア",
- "countryNameKY": "ケイマン諸島",
- "countryNameIO": "英領インド洋地域",
- "countryNameRU": "ロシア",
- "countryNameMA": "モロッコ",
- "countryNameAU": "オーストラリア",
- "countryNameBO": "ボリビア",
- "countryNameVA": "教皇庁 (バチカン市国)",
- "countryNameVG": "英領バージン諸島",
- "countryNameFM": "ミクロネシア",
- "countryNameAQ": "南極",
- "countryNameZM": "ザンビア",
- "countryNameBR": "ブラジル",
- "countryNameIS": "アイスランド",
- "countryNamePE": "ペルー",
- "countryNameBG": "ブルガリア",
- "countryNamePR": "プエルトリコ",
- "countryNameGI": "ジブラルタル",
- "countryNameBS": "バハマ",
- "countryNameJE": "ジャージー島",
- "countryNameMO": "マカオ特別行政区",
- "countryNameRW": "ルワンダ",
- "countryNameAS": "米領サモア",
- "countryNameBQ": "ボネール島、セント・ユースタティウス島、サバ島",
- "countryNameMF": "サン・マルタン",
- "countryNameTM": "トルクメニスタン",
- "countryNameML": "マリ",
- "countryNameTO": "トンガ",
- "countryNameNC": "ニューカレドニア",
- "countryNameAC": "アセンション島",
- "countryNameBN": "ブルネイ",
- "countryNameBD": "バングラデシュ",
- "countryNameMW": "マラウイ",
- "countryNameGM": "ガンビア",
- "countryNameGA": "ガボン",
- "countryNameCA": "カナダ",
- "countryNameSH": "セントヘレナ",
- "countryNameYT": "マヨット",
- "countryNameMN": "モンゴル",
- "countryNamePA": "パナマ",
- "countryNameCM": "カメルーン",
- "countryNameNE": "ニジェール",
- "countryNameCW": "キュラソー島",
- "countryNameJP": "日本",
- "countryNameCY": "キプロス",
- "countryNameCD": "コンゴ民主共和国",
- "countryNameTN": "チュニジア",
- "countryNameTR": "トルコ",
- "countryNameWS": "サモア",
- "countryNameSE": "スウェーデン",
- "countryNameXK": "コソボ",
- "countryNameKH": "カンボジア",
- "countryNamePL": "ポーランド",
- "countryNameDZ": "アルジェリア",
- "countryNameLR": "リベリア",
- "countryNameSO": "ソマリア",
- "countryNameDM": "ドミニカ国",
- "countryNameEG": "エジプト",
- "countryNameGF": "仏領ギアナ",
- "countryNameNZ": "ニュージーランド",
- "countryNamePS": "パレスチナ自治政府",
- "countryNameIL": "イスラエル",
- "countryNameSL": "シエラレオネ",
- "countryNameGR": "ギリシャ",
- "countryNameNG": "ナイジェリア",
- "countryNameMR": "モーリタニア",
- "countryNameVI": "米領バージン諸島",
- "countryNameGQ": "赤道ギニア",
- "countryNameMX": "メキシコ",
- "countryNameDJ": "ジブチ",
- "countryNameGN": "ギニア",
- "countryNameCN": "中国",
- "countryNameMZ": "モザンビーク",
- "countryNameBV": "ブーベ島",
- "countryNameNF": "ノーフォーク島",
- "countryNameTZ": "タンザニア",
- "countryNameAI": "アンギラ",
- "countryNameGS": "サウスジョージア・サウスサンドウィッチ諸島",
- "countryNameRS": "セルビア",
- "countryNameCC": "ココス(キーリング)諸島",
- "countryNameNA": "ナミビア",
- "countryNameDE": "ドイツ",
- "countryNameCG": "コンゴ共和国",
- "countryNameKW": "クウェート",
- "countryNameMH": "マーシャル諸島",
- "countryNameVN": "ベトナム",
- "countryNameBY": "ベラルーシ",
- "countryNameMY": "マレーシア",
- "countryNameST": "サントメ・プリンシペ",
- "countryNameLS": "レソト",
- "countryNameBI": "ブルンジ",
- "countryNameTD": "チャド",
- "countryNameCX": "クリスマス島",
- "countryNameIR": "イラン",
- "countryNameTV": "ツバル",
- "countryNameGW": "ギニアビサウ",
- "countryNameUA": "ウクライナ",
- "countryNameCU": "キューバ",
- "countryNameCO": "コロンビア",
- "countryNameNI": "ニカラグア",
- "countryNameHR": "クロアチア",
- "countryNameSC": "セーシェル",
- "countryNameNL": "オランダ",
- "countryNameUM": "その他の米領諸島",
- "countryNameIM": "マン島",
- "countryNameFJ": "フィジー",
- "countryNameSR": "スリナム",
- "countryNameGT": "グアテマラ",
- "countryNameSM": "サンマリノ",
- "countryNameLA": "ラオス",
- "countryNameGB": "イギリス",
- "countryNameBB": "バルバドス",
- "countryNameSI": "スロベニア",
- "countryNameAM": "アルメニア",
- "countryNameAR": "アルゼンチン",
- "countryNamePM": "サンピエール・ミクロン",
- "countryNameTF": "フランス領南極地方",
- "countryNameDO": "ドミニカ共和国",
- "countryNameZW": "ジンバブエ",
- "countryNameMQ": "マルティニーク",
- "countryNamePT": "ポルトガル",
- "countryNameCF": "中央アフリカ共和国",
- "countryNameBE": "ベルギー",
- "countryNameKM": "コモロ",
- "countryNameLY": "リビア",
- "countryNameIE": "アイルランド",
- "countryNameKP": "北朝鮮",
- "countryNameGG": "ガーンジー島",
- "countryNameSK": "スロバキア",
- "countryNameTC": "タークス・カイコス諸島",
- "countryNameNP": "ネパール",
- "countryNameBF": "ブルキナファソ",
- "countryNameYE": "イエメン",
- "countryNameBA": "ボスニア・ヘルツェゴビナ",
- "countryNameGP": "グアドループ",
- "countryNameMS": "モントセラト",
- "countryNameCL": "チリ",
- "countryNameIQ": "イラク",
- "countryNameSJ": "スバールバル諸島・ヤンマイエン島",
- "countryNameAX": "オーランド諸島",
- "countryNameKE": "ケニア",
- "countryNameGU": "グアム",
- "countryNameBM": "バミューダ諸島",
- "countryNameFO": "フェロー諸島",
- "countryNameBL": "サン・バルテルミー",
- "countryNameLB": "レバノン",
- "countryNameJM": "ジャマイカ",
- "countryNameAF": "アフガニスタン",
- "countryNameES": "スペイン",
- "countryNameMC": "モナコ",
- "countryNameSG": "シンガポール",
- "countryNameAL": "アルバニア",
- "countryNameSN": "セネガル",
- "countryNameSZ": "エスワティニ",
- "countryNameBZ": "ベリーズ",
- "countryNameCI": "コートジボワール",
- "countryNameTW": "台湾",
- "countryNameUY": "ウルグアイ",
- "countryNameCK": "クック諸島",
- "countryNameTH": "タイ",
- "countryNameHM": "ハード・マクドナルド諸島",
- "countryNameGD": "グレナダ",
- "countryNameUS": "米国",
- "countryNameAT": "オーストリア",
- "countryNameKR": "大韓民国",
- "countryNamePK": "パキスタン",
- "countryNameDK": "デンマーク",
- "countryNameSV": "エルサルバドル",
- "countryNamePW": "パラオ",
- "countryNameET": "エチオピア",
- "countryNameMG": "マダガスカル",
- "countryNameCR": "コスタリカ",
- "countryNameLU": "ルクセンブルク",
- "countryNameQA": "カタール",
- "countryNameBT": "ブータン",
- "countryNameSB": "ソロモン諸島",
- "countryNameAE": "アラブ首長国連邦",
- "countryNameAD": "アンドラ",
- "countryNameCV": "カーボベルデ",
- "countryNameAG": "アンティグア・バーブーダ",
- "countryNameMU": "モーリシャス",
- "countryNameHU": "ハンガリー",
- "countryNameSX": "シント・マールテン島",
- "countryNameCH": "スイス",
- "countryNamePN": "ピトケアン",
- "countryNameGL": "グリーンランド",
- "countryNamePH": "フィリピン",
- "countryNameMT": "マルタ",
- "countryNameKN": "セントクリストファー・ネーヴィス",
- "countryNameLK": "スリランカ",
- "countryNameKI": "キリバス",
- "countryNameBJ": "ベナン",
- "countryNameLV": "ラトビア",
- "countryNamePY": "パラグアイ"
- }
- }
+ "SyncNotification": {
+ "failure": "{0} を同期できません。",
+ "failureDescription": "エラーが発生したため、要求された同期を完了できませんでした。もう一度お試しください。",
+ "pending": "{0} を同期しています",
+ "pendingDescription": "最新のデータを取得しています。 この処理には数分かかる場合があります。",
+ "success": "{0} の同期が完了しました",
+ "successDescription": "WUfB サービスとの同期が {0} で完了しました"
+ },
+ "SyncSpinner": {
+ "text": "同期が処理中です。これには数分かかる場合があります。アラートを検索するか、数分後にもう一度ご確認ください。"
+ },
+ "TabName": {
+ "basics": "基本",
+ "driverUpdateSettings": "設定",
+ "otherDrivers": "その他のドライバー",
+ "properties": "プロパティ",
+ "recommendedDrivers": "推奨ドライバー"
+ },
+ "driverAddFilter": "フィルターの追加",
+ "driverApplicableDevices": "適用可能なデバイス",
+ "driverApprovalStatus": "ステータス",
+ "driverBulkActions": "一括処理",
+ "driverClass": "ドライバー クラス",
+ "driverCount": "{2} 件中 {0} ~ {1} 件のレコードを表示しています",
+ "driverFilterNoneSelected": "1 つも選択されていません",
+ "driverManufacturer": "製造元",
+ "driverName": "ドライバー名",
+ "driverNameLower": "ウィンドウ ドライバー更新プログラムの展開",
+ "driverNameUpper": "Windows ドライバー更新プログラムの展開",
+ "driverRefresh": "最新の情報に更新",
+ "driverReleaseDate": "リリース日",
+ "driverSearch": "検索",
+ "driverSearchKeyword": "検索キーワードを入力",
+ "driverVersion": "バージョン",
+ "firstDeploymentDate": "最初の展開",
+ "infoBoxText": "ポリシーを割り当てて作成した後、インベントリの作成には最大 24 時間かかる場合があります。",
+ "textBlockText": "ポリシー承認とデプロイ設定を選択します。更新プログラムを自動的に、または手動で承認および展開するためのポリシーを設定します。一度ポリシーを作成すると、承認方法を変更することはできませんが、割り当てられたデバイスのインベントリが作成されると、個々のドライバーの承認と展開の詳細の変更が一度可能になります。"
+ },
+ "TACSettings": {
+ "edgeSettings": "Microsoft Edge の構成設定",
+ "edgeWindowsDataProtectionSettings": "Microsoft Edge (Windows) のデータ保護設定 - プレビュー",
+ "edgeWindowsSettings": "Microsoft Edge (Windows) の構成設定 - プレビュー",
+ "generalAppConfig": "一般的なアプリの構成",
+ "generalSettings": "一般的な構成設定",
+ "outlookSMIMEConfig": "Outlook S/MIME の設定",
+ "outlookSettings": "Outlook の構成設定",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-ko.json b/Documentation/Strings-ko.json
index c9ac4fa..3864cac 100644
--- a/Documentation/Strings-ko.json
+++ b/Documentation/Strings-ko.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "데이터 보호 구성"
- },
- "OrganizeMailByThread": {
- "title": "스레드별로 메일 구성",
- "tooltip": "Outlook의 기본 동작은 메일 대화를 스레드된 대화 보기로 묶는 것입니다. 이 설정을 사용하지 않도록 설정하는 경우 Outlook은 각 메일을 개별적으로 표시하며 스레드별로 그룹화하지 않습니다."
- },
- "Sync": {
- "header": "연락처 필드를 기본 연락처 앱 구성과 동기화"
- },
- "allowBiometricsAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "allowBiometricsTitle": "앱에 액세스하려면 생체 인식 필요",
- "allowBiometricsTooltip": "사용자가 디바이스의 앱에 액세스하려면 TouchID 또는 FaceID 같은 생체 인식이 필요할 수 있습니다. 필요한 경우 생체 인식은 이 프로필에서 선택된 인증 방법과 함께 사용됩니다. Intune 앱 보호 정책에 관리되는 데이터에 액세스하기 전 액세스 요구 사항이 포함되므로, 이 앱 보호 정책이 배포될 때 이 설정은 사용하도록 설정되어 있지 않아야 합니다. 둘 다 사용하도록 설정하면 Outlook 모바일에 액세스하는 데 여러 액세스 프롬프트가 발생합니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [끄기]로 설정됩니다.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "allowCalendarNotificationsTitle": "일정 알림",
- "allowCalendarNotificationsTooltip": "앱 보호 정책 설정 \"조직 데이터 알림\"이 \"조직 데이터 차단\"으로 설정된 경우 일정 알림이 전체 세부 정보를 표시하도록 허용합니다.",
- "allowDefaultAppSignatureTitle": "기본 앱 서명",
- "allowDefaultAppSignatureTooltip": "기본 앱 서명은 앱이 메시지 작성 중 기본 서명으로 “iOS용 Outlook 다운로드”를 사용할지를 나타냅니다. 설정이 [끄기]로 구성된 경우 기본 서명은 사용되지 않지만, 사용자가 고유한 서명을 추가할 수 있습니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다.",
- "allowExternalRecipientsMailTipTitle": "외부 받는 사람 메일 설명",
- "allowExternalRecipientsMailTipTooltip": "보낸 사람이 외부 받는 사람을 추가하거나 외부 받는 사람이 포함된 메일 그룹을 추가하면 외부 받는 사람 메일 설명이 표시됩니다. 이 메일 설명은 작성하는 메시지가 조직에서 나갈지를 보낸 사람에게 알려 단어, 어조 및 내용을 올바르게 결정할 수 있도록 합니다. 하이브리드 최신 인증을 사용하는 Exchange Online 계정 및 온-프레미스 계정에만 사용할 수 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [켜기]로 설정됩니다.",
- "allowFocusedInboxTitle": "중요 받은 편지함",
- "allowFocusedInboxTooltip": "중요 받은 편지함은 받은 편지함을 [중요]와 [기타]의 두 탭으로 나눕니다. 가장 중요한 메일은 [중요] 탭에 있으며, 나머지 메일은 여전히 쉽게 액세스할 수 있지만 방해되지 않도록 [기타] 탭에 있습니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다.",
- "allowMailNotificationsAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "allowMailNotificationsTitle": "메일 알림",
- "allowMailNotificationsTooltip": "이 값은 Outlook이 메일 알림을 허용하는지를 지정합니다. 이 값을 [아니요]로 설정하면 메일 알림을 사용할 수 없습니다.",
- "allowOrgDataOnWearablesTitle": "착용식 디바이스의 조직 데이터",
- "allowOrgDataOnWearablesTooltip": "이 값은 Outlook이 착용식 디바이스와 동기화될 수 있는지를 지정합니다. 이 값을 [아니요]로 설정하면 착용식 디바이스 동기화를 사용할 수 없습니다.",
- "allowSaveContactsAllowUserChangeTooltip": "사용자가 연락처 동기화 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "allowSaveContactsTitle": "연락처 저장",
- "allowSaveContactsTooltip": "모바일 디바이스의 기본 주소록에 연락처를 저장하면 새 통화 및 문자 메시지를 사용자의 기존 Outlook 연락처에 연결할 수 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [끄기]로 설정됩니다.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "allowSmartReplyTitle": "제안된 회신",
- "allowSmartReplyTooltip": "메시지를 열면 Outlook에서 메시지 아래에 회신이 제안될 수 있습니다. 제안된 회신을 선택하면 회신을 보내기 전에 편집할 수 있습니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다.",
- "allowUserChangeGeneralToolTip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "allowUserChangeTitle": "사용자가 설정을 변경할 수 있도록 허용",
- "blockExternalImagesAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "blockExternalImagesTitle": "외부 이미지 차단",
- "blockExternalImagesTooltip": "[외부 이미지 차단]이 사용하도록 설정된 경우 앱에서 메시지 본문에 포함된 인터넷에서 호스트되는 이미지의 다운로드를 방지합니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [끄기]로 설정됩니다.",
- "disableAddinsTitle": "추가 기능 허용",
- "disableAddinsTooltip": "기본적으로 앱 보호 정책은 사용자가 타사 추가 기능을 사용할 수 있도록 허용하지만 \"정책 관리형 앱 데이터를 기본 앱 또는 추가 기능과 동기화\" 설정을 통해 추가 기능을 차단하는 데 사용할 수 있습니다. 이 설정을 \"끄기\"로 구성하면 앱 보호 정책 설정이 허용으로 설정된 경우 추가 기능이 차단됩니다.",
- "discoverFeedTitle": "피드 검색",
- "discoverFeedTooltip": "피드 검색에는 가장 자주 액세스하는 Office 파일이 표시됩니다. 기본적으로, Delve가 해당 사용자에게 사용하도록 설정된 경우 이 피드를 사용할 수 있습니다. 구성되지 않음으로 설정하면 기본 앱 설정이 On으로 설정됩니다.",
- "enableSMIMETitle": "S/MIME 사용",
- "enableSMIMETooltip": "전자 메일을 작성할 때 S/MIME 컨트롤의 사용 여부를 지정합니다.",
- "encryptAllEmails": "모든 전자 메일 암호화",
- "encryptAllEmailsAllowUserChangeTooltip": "사용자가 [모든 전자 메일 암호화] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "encryptAllEmailsTooltip": "전자 메일을 모두 암호화해야 하는지 여부를 지정합니다. 암호화 기능은 의도된 수신자만 데이터를 읽을 수 있도록 데이터를 암호화 텍스트로 변환합니다.",
- "ldapUrl": "LDAP URL",
- "ldapUrlTooltip": "클라이언트가 전자 메일 받는 사람에 대한 공개 암호화 키를 가져올 수 있는 LDAP 호스트 이름입니다. 키를 사용할 수 있게 되면 전자 메일이 암호화됩니다. 지원되는 형식: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "nativeCalendarSyncMAMOnlyTitle": "일정 동기화 허용",
- "nativeCalendarSyncMAMOnlyTooltip": "기본적으로 앱 보호 정책을 사용하면 기본 일정 앱으로 일정을 동기화할 수 있지만 일정 동기화를 사용하지 못하도록 차단하는 데 활용될 수 있습니다. 이 설정은 앱 보호 정책 설정과 별개로 작동하며 조직에서 회사 또는 학교 계정에 대해 일정 동기화를 사용할 수 있는지 여부를 정의할 수 있도록 합니다.",
- "nativeCalendarSyncTitle": "일정 동기화",
- "nativeCalendarSyncTooltip": "기본적으로 앱 보호 정책은 기본 일정 앱에 일정을 동기화하는 것을 허용하지만 \"정책 관리형 앱 데이터를 기본 앱 또는 추가 기능과 동기화\" 설정을 통해 일정 동기화 가용성을 차단하는 데 사용할 수 있습니다. 이 설정을 \"끄기\"로 구성하면 앱 보호 정책 설정이 허용으로 설정된 경우 일정 동기화가 차단됩니다.",
- "playMyEmailsTitle": "내 전자 메일 재생",
- "playMyEmailsTooltip": "[내 전자 메일 재생] 기능은 앱에서 기본적으로 사용하도록 설정되지 않지만 받은 편지함의 배너를 통해 적격 사용자로 수준이 올라갑니다. 이 기능이 [꺼짐]으로 설정되면 앱에서 적격 사용자로 수준이 올라가지 않습니다. 사용자는 이 기능이 [꺼짐]으로 설정된 경우에도 앱 내에서 [내 전자 메일 재생]을 수동으로 사용하도록 설정할 수 있습니다. [구성되지 않음]으로 설정하는 경우 기본 앱 설정은 [켜짐]이고 적격 사용자로 기능의 수준이 올라갑니다.",
- "signAllEmails": "모든 전자 메일 서명",
- "signAllEmailsAllowUserChangeTooltip": "사용자가 [모든 전자 메일 서명] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "signAllEmailsTooltip": "모든 전자 메일에 서명해야 하는지 여부를 지정합니다. 디지털 서명은 메일의 신뢰성을 확인하고 전송 중에 내용이 훼손되지 않았는지 확인합니다.",
- "syncAddressTitle": "주소",
- "syncAddressTooltip": "이 값은 연락처의 주소를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncBirthdayTitle": "생년월일",
- "syncBirthdayTooltip": "이 값은 연락처의 생일을 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncCompanyTitle": "회사",
- "syncCompanyTooltip": "이 값은 연락처의 회사 이름을 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncDepartmentTitle": "부서",
- "syncDepartmentTooltip": "이 값은 연락처의 부서를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncEmailAddressTitle": "전자 메일 주소",
- "syncEmailAddressTooltip": "이 값은 연락처의 메일 주소를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncInstantMessagingAddressTitle": "인스턴트 메시징 주소",
- "syncInstantMessagingAddressTooltip": "이 값은 연락처의 인스턴트 메시징 주소를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncJobTitleTitle": "직함",
- "syncJobTitleTooltip": "이 값은 연락처의 직위를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncNicknameTitle": "애칭",
- "syncNicknameTooltip": "이 값은 연락처의 애칭을 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncNotesTitle": "Notes",
- "syncNotesTooltip": "이 값은 연락처의 메모를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncPhoneHomeFaxNumberTitle": "전화 집 팩스 번호",
- "syncPhoneHomeFaxNumberTooltip": "이 값은 연락처의 집 팩스 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncPhoneHomeNumberTitle": "전화 집 번호",
- "syncPhoneHomeNumberTooltip": "이 값은 연락처의 집 전화 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncPhoneMobileNumberTitle": "전화 휴대폰 번호",
- "syncPhoneMobileNumberTooltip": "이 값은 연락처의 휴대폰 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncPhoneOtherNumberTitle": "전화 기타 번호",
- "syncPhoneOtherNumberTooltip": "이 값은 연락처의 기타 전화 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncPhonePagerNumberTitle": "전화 호출기 번호",
- "syncPhonePagerNumberTooltip": "이 값은 연락처의 호출기 전화 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncPhoneWorkFaxNumberTitle": "전화 회사 팩스 번호",
- "syncPhoneWorkFaxNumberTooltip": "이 값은 연락처의 회사 팩스 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncPhoneWorkNumberTitle": "전화 회사 번호",
- "syncPhoneWorkNumberTooltip": "이 값은 회사 전화 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncPrefixTitle": "이름 접두사",
- "syncPrefixTooltip": "이 값은 연락처의 이름 접두사를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "syncSuffixTitle": "이름 접미사",
- "syncSuffixTooltip": "이 값은 연락처의 이름 접미사를 기본 연락처와 동기화해야 하는지를 지정합니다.",
- "textPredictionsTitle": "텍스트 예측",
- "textPredictionsTooltip": "Outlook에서 메시지를 작성할 때 단어와 구를 제안할 수 있습니다. Outlook에서 단어나 구를 제안하는 경우 수락하려면 제안된 단어나 구를 살짝 밉니다. [구성되지 않음]으로 설정하면 기본 앱 설정이 [켜기]로 설정됩니다.",
- "themesEnabledTitle": "테마 사용",
- "themesEnabledTooltip": "사용자가 사용자 지정 시각적 개체 테마를 사용할 수 있는지 여부를 지정합니다."
- },
- "Languages": {
- "ar-aE": "아랍어(아랍에미리트)",
- "ar-bH": "아랍어(바레인)",
- "ar-dZ": "아랍어(알제리)",
- "ar-eG": "아랍어(이집트)",
- "ar-iQ": "아랍어(이라크)",
- "ar-jO": "아랍어(요르단)",
- "ar-kW": "아랍어(쿠웨이트)",
- "ar-lB": "아랍어(레바논)",
- "ar-lY": "아랍어(리비아)",
- "ar-mA": "아랍어(모로코)",
- "ar-oM": "아랍어(오만)",
- "ar-qA": "아랍어(카타르)",
- "ar-sA": "아랍어(사우디아라비아)",
- "ar-sY": "아랍어(시리아)",
- "ar-tN": "아랍어(튀니지)",
- "ar-yE": "아랍어(예멘)",
- "az-cyrl": "아제르바이잔어(키릴 자모, 아제르바이잔)",
- "az-latn": "아제르바이잔어(라틴 문자, 아제르바이잔)",
- "bn-bD": "벵골어(방글라데시)",
- "bn-iN": "벵골어(인도)",
- "bs-cyrl": "보스니아어(키릴 자모)",
- "bs-latn": "보스니아어(라틴 문자)",
- "zh-cN": "중국어(PRC)",
- "zh-hK": "중국어(홍콩 특별 행정구)",
- "zh-mO": "중국어(마카오 특별 행정구)",
- "zh-sG": "중국어(싱가포르)",
- "zh-tW": "중국어(대만)",
- "hr-bA": "크로아티아어(라틴 문자)",
- "hr-hR": "크로아티아어(크로아티아)",
- "nl-bE": "네덜란드어(벨기에)",
- "nl-nL": "네덜란드어(네덜란드)",
- "en-aU": "영어(오스트레일리아)",
- "en-bZ": "영어(벨리즈)",
- "en-cA": "영어(캐나다)",
- "en-cabn": "영어(카리브 해)",
- "en-iE": "영어(아일랜드)",
- "en-iN": "영어(인도)",
- "en-jM": "영어(자메이카)",
- "en-mY": "영어(말레이시아)",
- "en-nZ": "영어(뉴질랜드)",
- "en-pH": "영어(필리핀)",
- "en-sG": "영어(싱가포르)",
- "en-tT": "영어(트리니다드 토바고)",
- "en-uK": "영어(영국)",
- "en-uS": "영어(미국)",
- "en-zA": "영어(남아프리카 공화국)",
- "en-zW": "영어(짐바브웨)",
- "fr-bE": "프랑스어(벨기에)",
- "fr-cA": "프랑스어(캐나다)",
- "fr-cH": "프랑스어(스위스)",
- "fr-fR": "프랑스어(프랑스)",
- "fr-lU": "프랑스어(룩셈부르크)",
- "fr-mC": "프랑스어(모나코)",
- "de-aT": "독일어(오스트리아)",
- "de-cH": "독일어(스위스)",
- "de-dE": "독일어(독일)",
- "de-lI": "독일어(리히텐슈타인)",
- "de-lU": "독일어(룩셈부르크)",
- "iu-cans": "이눅티투트어(음절형, 캐나다)",
- "iu-latn": "이눅티투트어(라틴 문자, 캐나다)",
- "it-cH": "이탈리아어(스위스)",
- "it-iT": "이탈리아어(이탈리아)",
- "ms-bN": "말레이어(브루나이)",
- "ms-mY": "말레이어(말레이시아)",
- "mn-cN": "몽골어(전통 몽골어, 중국)",
- "mn-mN": "몽골어(키릴 자모, 몽골)",
- "no-nB": "노르웨이어, 복말(노르웨이)",
- "no-nn": "노르웨이어(니노르스크, 노르웨이)",
- "pt-bR": "포르투갈어(브라질)",
- "pt-pT": "포르투갈어(포르투갈)",
- "quz-bO": "케추아어(볼리비아)",
- "quz-eC": "케추아어(에콰도르)",
- "quz-pE": "케추아어(페루)",
- "smj-nO": "룰레 라프어(노르웨이)",
- "smj-sE": "룰레 라프어(스웨덴)",
- "se-fI": "북부 라프어(핀란드)",
- "se-nO": "북부 라프어(노르웨이)",
- "se-sE": "북부 라프어(스웨덴)",
- "sma-nO": "남부 라프어(노르웨이)",
- "sma-sE": "남부 라프어(스웨덴)",
- "smn": "이나리 라프어(핀란드)",
- "sms": "스콜트 라프어(핀란드)",
- "sr-Cyrl-bA": "세르비아어(키릴 자모)",
- "sr-Cyrl-rS": "세르비아어(키릴 자모, 세르비아-몬테네그로)",
- "sr-Latn-bA": "세르비아어(라틴 문자)",
- "sr-Latn-rS": "세르비아어(라틴 문자, 세르비아)",
- "dsb": "저지 소르비아어(독일)",
- "hsb": "고지 소르비아어(독일)",
- "es-es-tradnl": "스페인어(스페인, 전통 정렬)",
- "es-aR": "스페인어(아르헨티나)",
- "es-bO": "스페인어(볼리비아)",
- "es-cL": "스페인어(칠레)",
- "es-cO": "스페인어(콜롬비아)",
- "es-cR": "스페인어(코스타리카)",
- "es-dO": "스페인어(도미니카 공화국)",
- "es-eC": "스페인어(에콰도르)",
- "es-eS": "스페인어(스페인)",
- "es-gT": "스페인어(과테말라)",
- "es-hN": "스페인어(온두라스)",
- "es-mX": "스페인어(멕시코)",
- "es-nI": "스페인어(니카라과)",
- "es-pA": "스페인어(파나마)",
- "es-pE": "스페인어(페루)",
- "es-pR": "스페인어(푸에르토리코)",
- "es-pY": "스페인어(파라과이)",
- "es-sV": "스페인어(엘살바도르)",
- "es-uS": "스페인어(미국)",
- "es-uY": "스페인어(우루과이)",
- "es-vE": "스페인어(베네수엘라)",
- "sv-fI": "스웨덴어(핀란드)",
- "uz-cyrl": "우즈베크어(키릴 자모, 우즈베키스탄)",
- "uz-latn": "우즈베크어(라틴 문자, 우즈베키스탄)",
- "af": "아프리칸스어(남아프리카 공화국)",
- "sq": "알바니아어(알바니아)",
- "am": "암하라어(에티오피아)",
- "hy": "아르메니아어(아르메니아)",
- "as": "아삼어(인도)",
- "ba": "바슈키르어(러시아)",
- "eu": "바스크어(바스크어)",
- "be": "벨라루스어(벨로루시)",
- "br": "브르타뉴어(프랑스)",
- "bg": "불가리아어(불가리아)",
- "ca": "카탈로니아어(카탈로니아어)",
- "co": "코르시카어(프랑스)",
- "cs": "체코어(체코)",
- "da": "덴마크어(덴마크)",
- "dv": "디베히어(몰디브)",
- "et": "에스토니아어(에스토니아)",
- "fo": "페로어(페로 제도)",
- "fil": "필리핀어(필리핀)",
- "fi": "핀란드어(핀란드)",
- "gl": "갈리시아어(갈리시아)",
- "ka": "조지아어(그루지야)",
- "el": "그리스어(그리스)",
- "gu": "구자라트어(인도)",
- "ha": "하우사어(라틴 문자, 나이지리아)",
- "he": "히브리어(이스라엘)",
- "hi": "힌디어(인도)",
- "hu": "헝가리어(헝가리)",
- "is": "아이슬란드어(아이슬란드)",
- "ig": "이그보어(나이지리아)",
- "id": "인도네시아어(인도네시아)",
- "ga": "아일랜드어(아일랜드)",
- "xh": "코사어(남아프리카 공화국)",
- "zu": "줄루어(남아프리카 공화국)",
- "ja": "일본어(일본)",
- "kn": "칸나다어(인도)",
- "kk": "카자흐어(카자흐스탄)",
- "km": "크메르어(캄보디아)",
- "rw": "키냐르완다어(르완다)",
- "sw": "스와힐리어(케냐)",
- "kok": "코카니어(인도)",
- "ko": "한국어(대한민국)",
- "ky": "키르기스어(키르기스스탄)",
- "lo": "라오어(라오스)",
- "lv": "라트비아어(라트비아)",
- "lt": "리투아니아어(리투아니아)",
- "lb": "룩셈부르크어(룩셈부르크)",
- "mk": "마케도니아어(북마케도니아)",
- "ml": "몽골어(인도)",
- "mt": "몰타어(몰타)",
- "mi": "마오리어(뉴질랜드)",
- "mr": "마라티어(인도)",
- "moh": "모호크어(모호크)",
- "ne": "네팔어(네팔)",
- "oc": "오크어(프랑스)",
- "or": "오디아어(인도)",
- "ps": "파슈토어(아프가니스탄)",
- "fa": "페르시아어",
- "pl": "폴란드어(폴란드)",
- "pa": "펀잡어(인도)",
- "ro": "루마니아어(루마니아)",
- "rm": "로만시어(스위스)",
- "ru": "러시아어(러시아)",
- "sa": "산스크리트어(인도)",
- "st": "세소토 사 레보아어(남아프리카 공화국)",
- "tn": "세츠와나어(남아프리카 공화국)",
- "si": "스리랑카어(스리랑카)",
- "sk": "슬로바키아어(슬로바키아)",
- "sl": "슬로베니아어(슬로베니아)",
- "sv": "스웨덴어(스웨덴)",
- "syr": "시리아어(시리아)",
- "tg": "타지크어(키릴 자모, 타지키스탄)",
- "ta": "타밀어(인도)",
- "tt": "타타르어(러시아)",
- "te": "텔루구어(인도)",
- "th": "태국어(태국)",
- "bo": "티베트어(중국)",
- "tr": "터키어(터키)",
- "tk": "투르크멘어(투르크메니스탄)",
- "uk": "우크라이나어(우크라이나)",
- "ur": "우르두어(파키스탄)",
- "vi": "베트남어(베트남)",
- "cy": "웨일스어(영국)",
- "wo": "월로프어(세네갈)",
- "ii": "이 문자(중국)",
- "yo": "요루바어(나이지리아)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "엔드포인트용 Microsoft Defender",
- "androidDeviceOwnerApplications": "애플리케이션",
- "androidDeviceOwnerPolicyMessages": "사용자 지정 지원 정보",
- "androidForWorkPassword": "디바이스 암호",
- "appManagement": "앱 차단 또는 허용",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "제한된 앱",
- "applicationVisibility": "앱 표시 또는 숨기기",
- "applications": "앱 스토어",
- "applicationsAndGames": "앱 스토어, 문서 보기, 게임",
- "applicationsAndGoogle": "Google Play 스토어",
- "appsAndExperience": "앱 및 환경",
- "associatedDomains": "연결된 도메인",
- "autonomousSingleAppMode": "자치 단일 앱 모드",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Windows 암호화",
- "bootOptions": "부팅 옵션",
- "browser": "브라우저",
- "builtinApps": "기본 제공 앱",
- "cameras": "카메라",
- "cellular": "셀룰러",
- "cloudAndStorage": "클라우드 및 스토리지",
- "cloudPrint": "클라우드 프린터",
- "complianceEmailProfile": "전자 메일",
- "connectedDevices": "연결된 디바이스",
- "connectivity": "셀룰러 및 연결",
- "contentCaching": "콘텐츠 캐싱",
- "controlPanelAndSettings": "제어판 및 설정",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "사용자 지정 규정 준수",
- "customConfiguration": "사용자 지정 구성 프로필",
- "customOMASettings": "사용자 지정 OMA-URI 설정",
- "customPreferences": "기본 설정 파일",
- "dFCISecuritySettings": "보안 설정",
- "defender": "Microsoft Defender 바이러스 백신",
- "defenderAntivirus": "Microsoft Defender 바이러스 백신",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows 방화벽",
- "defenderLocalSecurityOptions": "로컬 디바이스 보안 옵션",
- "defenderSecurityCenter": "Microsoft Defender 보안 센터",
- "deliveryOptimization": "제공 최적화",
- "derivedCredentialAuthenticationConfiguration": "파생된 자격 증명",
- "deviceExperience": "디바이스 환경",
- "deviceFirmwareConfigurationInterface": "디바이스 펌웨어 구성 인터페이스",
- "deviceGuard": "Microsoft Defender 애플리케이션 제어",
- "deviceHealth": "디바이스 상태",
- "devicePassword": "디바이스 암호",
- "deviceProperties": "디바이스 속성",
- "deviceRestrictions": "일반",
- "deviceSecurity": "시스템 보안",
- "display": "표시",
- "domainJoin": "도메인 가입",
- "domains": "도메인",
- "edgeBrowser": "Microsoft Edge 레거시(버전 45 이하)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge 키오스크 모드",
- "editionUpgrade": "버전 업그레이드",
- "education": "교육",
- "educationDeviceCerts": "디바이스 인증서",
- "educationStudentCerts": "학생 인증서",
- "educationTakeATest": "테스트 수행",
- "educationTeacherCerts": "교사 인증서",
- "emailProfile": "전자 메일",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Single Sign-On 앱 확장",
- "filevault": "FileVault",
- "firewall": "방화벽",
- "games": "게임",
- "gatekeeper": "게이트키퍼",
- "healthMonitoring": "상태 모니터링",
- "homeScreenLayout": "홈 화면 레이아웃",
- "iOSWallpaper": "배경 무늬",
- "importedPFX": "PKCS 가져온 인증서",
- "iosDefenderAtp": "엔드포인트용 Microsoft Defender",
- "iosKiosk": "키오스크",
- "kernelExtensions": "커널 확장",
- "keyboardAndDictionary": "키보드 및 사전",
- "kiosk": "키오스크",
- "kioskAndroidEnterprise": "전용 디바이스",
- "kioskConfiguration": "키오스크",
- "kioskConfigurationV2": "키오스크",
- "kioskWebBrowser": "키오스크 웹 브라우저",
- "lockScreenMessage": "잠금 화면 메시지",
- "lockedScreenExperience": "잠긴 화면 환경",
- "logging": "보고 및 원격 분석",
- "loginItems": "로그인 항목",
- "loginWindow": "로그인 창",
- "macDefenderAtp": "엔드포인트용 Microsoft Defender",
- "maintenance": "유지 관리",
- "malware": "맬웨어",
- "messaging": "메시징",
- "microphonesAndSpeakers": "마이크 및 스피커",
- "networkBoundary": "네트워크 경계",
- "networkProxy": "네트워크 프록시",
- "notifications": "앱 알림",
- "pKCS": "PKCS 인증서",
- "password": "암호",
- "personalProfile": "개인 프로필",
- "personalization": "개인 설정",
- "policyOverride": "그룹 정책 재정의",
- "ports": "포트",
- "powerSettings": "전원 설정",
- "printer": "프린터",
- "privacy": "개인정보취급방침",
- "privacyPerApp": "앱별 개인 정보 보호 예외",
- "privacyPreferences": "개인 정보 기본 설정",
- "projection": "프로젝션",
- "radios": "라디오",
- "sCCMCompliance": "Configuration Manager 준수",
- "sCEP": "SCEP 인증서",
- "sCEPProperties": "SCEP 인증서",
- "sMode": "모드 전환(Windows 참가자인 경우에만)",
- "safari": "Safari",
- "search": "검색",
- "session": "세션",
- "sharedDevice": "공유 iPad",
- "sharedPCAccountManager": "공유 다중 사용자 디바이스",
- "singleSignOn": "Single Sign-On",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "설정",
- "start": "시작",
- "systemExtensions": "시스템 확장",
- "systemSecurity": "시스템 보안",
- "trustedCert": "신뢰할 수 있는 인증서",
- "uEFIAccess": "UEFI 액세스",
- "updates": "업데이트",
- "userRights": "사용자 권한",
- "usersAndAccounts": "사용자 및 계정",
- "vPN": "기본 VPN",
- "vPNApps": "자동 VPN",
- "vPNAppsAndTrafficRules": "앱 및 트래픽 규칙",
- "vPNConditionalAccess": "조건부 액세스",
- "vPNConnectivity": "연결",
- "vPNDNSTriggers": "DNS 설정",
- "vPNIKEv2": "IKEv2 설정",
- "vPNProxy": "프록시",
- "vPNSplitTunneling": "분할 터널링",
- "vPNTrustedNetwork": "신뢰할 수 있는 네트워크 검색",
- "wakeSettings": "절전 모드 해제 설정",
- "webContentFilter": "웹 콘텐츠 필터",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "엔드포인트용 Microsoft Defender",
- "windowsDefenderATP": "엔드포인트용 Microsoft Defender",
- "windowsHelloForBusiness": "비즈니스용 Windows Hello",
- "windowsSpotlight": "Windows 추천",
- "wiredNetwork": "유선 네트워크",
- "wireless": "무선",
- "wirelessProjection": "무선 프로젝션",
- "workProfile": "회사 프로필 설정",
- "workProfilePassword": "회사 프로필 암호",
- "xboxServices": "Xbox 서비스",
- "zebraMx": "MX 프로필(Zebra만)",
- "complianceActionsLabel": "비준수에 대한 작업"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "설명"
- },
- "FeatureDeploymentSettings": {
- "header": "기능 배포 설정"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "이 기능은 디바이스를 다운그레이드할 수 없습니다.",
- "label": "배포할 기능 업데이트"
- },
- "GradualRolloutEndDate": {
- "label": "마지막 그룹 가용성"
- },
- "GradualRolloutInterval": {
- "label": "그룹 사이 일 수"
- },
- "GradualRolloutStartDate": {
- "label": "첫 번째 그룹 가용성"
- },
- "Name": {
- "label": "이름"
- },
- "OptionalUpdate": {
- "label": "필수 또는 선택적 업데이트"
- },
- "RolloutOptions": {
- "label": "롤아웃 옵션"
- },
- "RolloutSettings": {
- "header": "Windows 업데이트에서 업데이트를 언제 사용할 수 있게 할까요?"
- },
- "ScopeSettings": {
- "header": "이 정책의 범위 태그를 구성합니다."
- },
- "StartDateOnlyStartDate": {
- "label": "사용 가능한 첫 번째 날짜"
- },
- "Windows11SideBySideInstall": {
- "disabled": "사용 안 함",
- "enabled": "사용",
- "infoBalloonContent": "Windows 11에 적합하지 않은 디바이스에 최신 Windows 10 기능 업데이트를 설치할지 여부 제어",
- "label": "장치에서 Windows 11을 실행할 수 없는 경우 최신 Windows 10 기능 업데이트 설치",
- "notApplicable": "해당 없음",
- "summaryLabel": "Windows 11을 실행할 수 없는 디바이스에 Windows 10 설치"
- },
- "bladeTitle": "기능 업데이트 배포",
- "deploymentSettingsTitle": "배포 설정",
- "loadError": "로드하지 못했습니다.",
- "windows11EULA": "배포할 이 기능 업데이트를 선택하면 이 운영 체제를 장치에 적용할 때 (1) 해당 Windows 라이선스를 볼륨 라이선싱을 통해 구입했거나 (2) 조직을 구속할 권한이 있고 조직을 대신하여 여기에서 확인할 수 있는 Microsoft 소프트웨어 사용 조건을 수락한다는 데 동의하는 것입니다. {0}"
- },
- "Notifications": {
- "deploymentSaved": "\"{0}\"이(가) 저장되었습니다.",
- "newFeatureUpdateDeploymentCreated": "새 기능 업데이트 배포가 생성되었습니다."
- },
- "TabName": {
- "deploymentSettings": "배포 설정",
- "groupAssignmentSettings": "할당",
- "scopeSettings": "범위 태그"
- },
- "gradualRolloutLicenseWarning": "이 기능을 사용하려면 특정 라이선스가 필요합니다.",
- "gradualRolloutLicenseWarningEdit": "이 기능을 선택하지 않고 정책을 저장할 때까지 이 기능을 계속 사용하고 구성할 수 있습니다.",
- "licenseLearnMoreText": "필수 구성 요소 및 기능 업데이트 정책에 대해 자세히 알아보세요.",
- "optionalUpdateWarning": "선택 기능은 Windows 11 업데이트에만 사용할 수 있습니다.",
- "profileNameWarning": "이름은 64자 미만이어야 합니다.",
- "specificLicensingRequired": "선택한 일부 기능에는 특정 라이선스가 필요합니다."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "PIN에 소문자 사용 허용",
- "notAllow": "PIN에 소문자 사용 허용 안 함",
- "requireAtLeastOne": "PIN에 소문자를 하나 이상 사용해야 함"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "PIN에 특수 문자 사용 허용",
- "notAllow": "PIN에 특수 문자 사용 허용 안 함",
- "requireAtLeastOne": "PIN에 특수 문자를 하나 이상 사용해야 함"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "PIN에 대문자 사용 허용",
- "notAllow": "PIN에 대문자 사용 허용 안 함",
- "requireAtLeastOne": "PIN에 대문자를 하나 이상 사용해야 함"
- }
+ "InstallContextType": {
+ "device": "디바이스",
+ "deviceContext": "디바이스 컨텍스트",
+ "user": "사용자",
+ "userContext": "사용자 컨텍스트"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "앱 버전",
- "dependencyName": "종속성 이름",
- "lastModifiedTime": "마지막으로 수정된 시간",
- "relationship": "관계",
- "replaced": "대체됨",
- "searchPlaceholder": "앱 이름으로 필터링",
- "status": "상태 정보",
- "statusDetails": "상태",
- "supersedenceName": "대체 이름"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "자식 종속성",
- "indirectSupersedence": "직접 관련되지 않음",
- "supersedenceAncestors": "대체하는",
- "supersedenceDescendants": "대체됨"
- },
- "SupersededReplaced": {
- "no": "아니요",
- "yes": "예"
- },
- "Tabs": {
- "chart": "차트",
- "dependency": "종속성",
- "label": "보기: ",
- "supersedence": "대체",
- "table": "테이블"
- },
- "dependencyGraphAriaLabel": "앱 종속성 차트",
- "supersedenceGraphAriaLabel": "앱 대체 차트"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "검색 스크립트를 선택하세요.",
- "scriptFileLabel": "검색 스크립트 선택"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "활성화된 경우 디바이스는 검색 PowerShell 스크립트에서 반환된 사용자 지정 데이터를 기반으로 JSON 파일에 정의된 사용자 지정 규칙에 따라 준수해야 합니다.",
- "label": "사용자 지정 규정 준수는 현재 미리 보기로 제공됩니다. 일반 공급 상태가 되면 Microsoft Intune을 포함하는 라이선싱 옵션에 추가 비용을 지불하고 추가할 수 있습니다."
- },
- "ScriptPicker": {
- "objectName": "스크립트",
- "placeholder": "선택하려면 클릭",
- "searchboxPlaceholder": "스크립트 이름으로 검색",
- "title": "검색 스크립트 선택"
- },
- "SummaryGrid": {
- "ariaLabel": "사용자 지정 규정 준수 규칙 요약"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "모든 준수 정책에는 하나의 차단 작업이 필요합니다.",
+ "graceperiod": "일정(비준수 후 기간(일))",
+ "graceperiodInfo": "사용자의 디바이스에 대해 이 작업이 트리거되어야 하는 비준수 후 기간(일)을 지정합니다.",
+ "subtitle": "작업 매개 변수 지정",
+ "title": "작업 매개 변수"
+ },
+ "List": {
+ "gracePeriodDay": "비준수 후 {0}일",
+ "gracePeriodDays": "비준수 후 {0}일",
+ "gracePeriodHour": "비준수 후 {0}시간",
+ "gracePeriodHours": "비준수 후 {0}시간",
+ "gracePeriodMinute": "비준수 후 {0}분",
+ "gracePeriodMinutes": "비준수 후 {0}분",
+ "immediately": "즉시",
+ "schedule": "일정",
+ "scheduleInfoBalloon": "비규정 준수 후 기간(일)",
+ "subtitle": "비규격 디바이스에 대한 일련의 작업 지정",
+ "title": "작업"
+ },
+ "Notification": {
+ "additionalEmailLabel": "기타",
+ "additionalRecipients": "추가 받는 사람(메일을 통해)",
+ "additionalRecipientsBladeTitle": "추가 받는 사람 선택",
+ "emailAddressPrompt": "메일 주소 입력(쉼표로 구분)",
+ "invalidEmail": "잘못된 메일 주소",
+ "messageTemplate": "메시지 템플릿",
+ "noneSelected": "선택된 항목이 없음",
+ "notSelected": "선택되지 않음",
+ "numSelected": "{0}개 선택됨",
+ "selected": "선택됨"
},
- "UploadFile": {
- "jsonFileLabel": "사용자 지정 규정 준수 설정을 사용하여 JSON 파일 업로드 및 유효성 검사",
- "noFileSelectedError": "JSON 파일을 선택하세요.",
- "parseFileSelectedError": "JSON 파일이 유효하지 않음"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "필터",
- "noFilters": "없음"
- },
- "Platform": {
- "all": "모두",
- "android": "Android 디바이스 관리자",
- "androidAOSP": "Android(AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android enterprise",
- "common": "일반",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS 및 Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "알 수 없음",
- "unsupported": "지원되지 않음",
- "windows": "Windows",
- "windows10": "Windows 10 이상",
- "windows10CM": "Windows 10 이상(ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 이상",
- "windows8And10": "Windows 8 및 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 이상",
- "windows10AndWindowsServer": "Windows 10, Windows 11 및 Windows Server(ConfigMgr)",
- "windows10andLaterCM": "Windows 10 이상(ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows PC"
- },
+ "block": "디바이스를 비규격으로 표시",
+ "lockDevice": "잠금 디바이스(로컬 작업)",
+ "lockDeviceWithPasscode": "잠금 디바이스(로컬 작업)",
+ "noAction": "작업 없음",
+ "noActionRow": "작업이 없습니다. '추가'를 선택하여 작업을 추가하세요.",
+ "pushNotification": "최종 사용자에게 푸시 알림 보내기",
+ "remoteLock": "원격으로 비규격 디바이스 잠금",
+ "removeSourceAccessProfile": "소스 액세스 프로필 제거",
+ "retire": "사용 중지 목록에 디바이스 추가",
+ "wipe": "초기화",
+ "emailNotification": "최종 사용자에게 메일 보내기"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "관리자 그룹",
+ "RoleAssignmentAdminDesc": "관리자 그룹 사용자는 이 역할에 할당된 관리자입니다.",
+ "rolesMenuTitle": "Endpoint Manager 역할",
+ "RoleAssignmentScopeDesc": "이 역할 할당의 관리자는 정책, 애플리케이션 및 원격 작업을 대상으로 지정할 수 있음",
+ "RoleAssignmentScope": "범위 그룹"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "앱 정보",
"nameForOfficeSuitApp": "앱 제품군 정보"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "Android에서는 PIN 대신에 지문 식별 사용을 허용할 수 있습니다. 사용자가 자신의 작업 계정으로 이 앱에 액세스할 때 지문을 제공하라는 메시지가 표시됩니다.",
- "iOS": "iOS/iPadOS 디바이스에서 PIN 대신 지문 ID를 사용하도록 할 수 있습니다. 사용자가 회사 계정을 사용하여 이 앱에 액세스하려고 하면 지문을 제공하라는 메시지가 표시됩니다.",
- "mac": "Mac 디바이스에서 PIN 대신 지문 ID를 사용하도록 할 수 있습니다. 사용자가 회사 계정을 사용하여 이 앱에 액세스하려고 하면 지문을 제공하라는 메시지가 표시됩니다."
- },
- "allowWidgetContentSync": "[차단]을 선택하여 정책 관리 앱이 앱 위젯에 데이터를 저장하지 못하도록 합니다. [허용]을 선택하면 정책 관리 앱 내에서 해당 기능이 지원되고 사용하도록 설정된 경우 정책 관리 앱이 앱 위젯에 데이터를 저장할 수 있습니다. \r\n\r\n \r\n\r\n앱은 앱 구성 정책과 함께 추가 구성 기능을 제공할 수 있습니다. 자세한 내용은 앱 설명서를 참조하세요.",
- "appSharingFromLevel1": "다음 옵션 중 하나를 선택하여 이 앱이 데이터를 수신할 수 있는 앱을 지정하세요.",
- "appSharingFromLevel2": "{0}: 다른 정책 관리 앱에서만 조직 문서 또는 계정의 데이터 받기 허용",
- "appSharingFromLevel3": "{0}: 모든 앱에서 조직 문서 또는 계정의 데이터 받기 허용",
- "appSharingFromLevel4": "{0}: 모든 앱에서 조직 문서 또는 계정의 데이터 받기 허용 안 함",
- "appSharingFromLevel5": "{0}: 모든 앱에서의 데이터 전송을 허용하고 사용자 ID 없이 들어오는 모든 데이터를 조직 데이터로 처리합니다.",
- "appSharingToLevel1": "다음 옵션 중 하나를 선택하여 이 앱이 데이터를 전송할 수 있는 앱을 지정하세요.",
- "appSharingToLevel2": "{0}: 조직 데이터를 다른 정책 관리 앱으로만 보내기 허용",
- "appSharingToLevel3": "{0}: 조직 데이터를 모든 앱으로 보내기 허용",
- "appSharingToLevel4": "{0}: 조직 데이터를 모든 앱으로 보내기 허용 안 함",
- "appSharingToLevel5": "{0}: 등록된 디바이스의 다른 정책 관리 앱으로의 전송 및 다른 MDM 관리 앱으로의 파일 전송만 허용합니다.",
- "appSharingToLevel6": "{0}: 다른 정책 관리 앱으로의 전송만 허용하고 OS [여는 위치]/[공유] 대화 상자를 필터링하여 정책 관리 앱만 표시합니다.",
- "assignmentFilterEdit1": "이 정책에 할당 필터를 적용하면 '모든 디바이스 유형의 앱 대상' 및 '앱' 페이지의 '디바이스 유형'에 대해 지정된 값 외에도 '장치 관리 유형' 속성이 적용됩니다.",
- "assignmentFilterEdit2": "앱 보호 정책 할당에 대해 자세히 알아보세요.",
- "conditionalEncryption1": "등록된 디바이스에서 디바이스 암호화가 검색된 경우 내부 앱 스토리지에 대해 앱 암호화를 사용하지 않으려면 {0}을(를) 선택합니다.",
- "conditionalEncryption2": "참고: Intune은 Intune MDM을 통해서만 디바이스 등록을 검색할 수 있습니다. 외부 앱 스토리지는 관리되지 않는 애플리케이션에서 데이터에 액세스할 수 없도록 여전히 암호화됩니다.",
- "contactSyncMac": "사용하지 않도록 설정하면 앱이 기본 주소록에 연락처를 저장할 수 없습니다.",
- "contactsSync": "차단을 선택하여 정책 관리 앱이 기본 앱(연락처, 일정 및 위젯)에 데이터를 저장하지 못하도록 하거나 정책 관리 앱 내에서 추가 기능을 사용하지 못하도록 합니다. 허용을 선택하면 해당 기능이 정책 관리 앱 내에서 지원되어 사용되는 경우, 정책 관리 앱이 기본 앱에 데이터를 저장하거나 추가 기능을 사용할 수 있습니다.
앱은 앱 구성 정책을 통해 추가 구성 기능을 제공할 수 있습니다. 자세한 내용은 앱 설명서를 참조하세요.",
- "deviceTypeTargetingCreate1": "디바이스 유형 대상이 정책 만들기의 할당 단계로 이동했습니다.",
- "deviceTypeTargetingEdit1": "이 정책에 할당 필터를 적용하면 '모든 디바이스 유형의 앱 대상' 및 '앱' 페이지의 '디바이스 유형'에 대해 지정된 값 외에도 '장치 관리 유형' 속성이 적용됩니다.",
- "deviceTypeTargetingEdit2": "장치 관리 유형 대상을 편집하려면 '모든 디바이스 유형의 앱 대상' = '예'를 다시 설정합니다. 그런 다음 '장치 관리 형식'에 대해 원하는 값으로 MAM 할당 필터를 만듭니다.",
- "deviceTypeTargetingHasMoved": "앱 보호 정책 할당에 대해 자세히 알아보기",
- "encryptionAndroid1": "Intune 모바일 애플리케이션 관리 정책과 연결된 앱의 경우 Microsoft에서 암호화를 제공합니다. 데이터는 모바일 애플리케이션 관리 정책의 설정에 따라 파일 I/O 작업 동안 동기적으로 암호화됩니다. Android의 관리되는 앱은 플랫폼 암호화 라이브러리를 사용하여 CBC 모드에서 AES-128 암호화를 사용합니다. 이 암호화 방법은 FIPS 140-2를 준수하지 않습니다. SHA-256 암호화는 SigAlg 매개 변수를 사용하는 명시적 명령으로 지원되며 디바이스 4.2 이상에서만 작동합니다. 디바이스 스토리지의 콘텐츠는 항상 암호화됩니다.",
- "encryptionAndroid2": "앱 정책에서 암호화를 요구하면 최종 사용자는 디바이스에 액세스하기 위해 PIN을 설정하고 사용해야 합니다. 디바이스 액세스를 위해 설정된 PIN이 없으면 앱이 시작되지 않고 최종 사용자에게 “이 애플리케이션에 액세스하려면 회사에서 먼저 디바이스 PIN을 사용하도록 설정해야 합니다.\" 메시지가 표시됩니다.",
- "encryptionMac1": "Intune 모바일 애플리케이션 관리 정책과 연결된 앱의 경우 Microsoft에서 암호화를 제공합니다. 데이터는 모바일 애플리케이션 관리 정책의 설정에 따라 파일 I/O 작업 동안 동기적으로 암호화됩니다. Mac의 관리되는 앱은 플랫폼 암호화 라이브러리를 사용하여 CBC 모드에서 AES-128 암호화를 사용합니다. 이 암호화 방법은 FIPS 140-2를 준수하지 않습니다. SHA-256 암호화는 SigAlg 매개 변수를 사용하는 명시적 명령으로 지원되며 디바이스 4.2 이상에서만 작동합니다. 디바이스 스토리지의 콘텐츠는 항상 암호화됩니다.",
- "faceId1": "해당하는 경우 PIN 대신 얼굴 인식 사용을 허용할 수 있습니다. 사용자가 회사 계정으로 이 앱에 액세스하면 얼굴 인식을 제공하라는 메시지가 표시됩니다.",
- "faceId2": "앱 액세스를 위해 PIN 대신 얼굴 인식을 허용하려면 예를 선택합니다.",
- "managementLevelsAndroid1": "이 정책이 Android 디바이스 관리자 디바이스, Android Enterprise 디바이스 또는 관리형 디바이스에 적용되는지 여부를 지정하려면 이 옵션을 사용합니다.",
- "managementLevelsAndroid2": "{0}: 관리되지 않는 디바이스는 Intune MDM 관리가 검색되지 않은 디바이스입니다. 여기에는 타사 MDM 공급업체가 포함됩니다.",
- "managementLevelsAndroid3": "{0}: Android 디바이스 관리 API를 사용하는 Intune 관리 디바이스입니다.",
- "managementLevelsAndroid4": "{0}: Android Enterprise 회사 프로필 또는 Android Enterprise 전체 디바이스 관리를 사용하는 Intune 관리 디바이스입니다.",
- "managementLevelsIos1": "이 정책이 MDM 관리 디바이스 또는 관리되지 않는 디바이스에 적용되는지를 지정하려면 이 옵션을 사용합니다.",
- "managementLevelsIos2": "{0}: 관리되지 않는 디바이스는 Intune MDM 관리가 검색되지 않은 디바이스입니다. 여기에는 타사 MDM 공급업체가 포함됩니다.",
- "managementLevelsIos3": "{0}: 관리 디바이스는 Intune MDM에서 관리됩니다.",
- "minAppVersion": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 필요한 최소 앱 버전 번호를 정의합니다.",
- "minAppVersionWarning": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 권장되는 최소 앱 버전 번호를 정의합니다.",
- "minOsVersion": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 필요한 최소 OS 버전 번호를 정의합니다.",
- "minOsVersionWarning": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 권장되는 최소 OS 버전 번호를 정의합니다.",
- "minPatchVersion": "사용자가 앱에 안전하게 액세스할 수 있는 최소 필수 Android 보안 패치 레벨을 정의합니다.",
- "minPatchVersionWarning": "사용자가 앱에 안전하게 액세스할 수 있는 최소 권장 Android 보안 패치 레벨을 정의합니다.",
- "minSdkVersion": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 필요한 최소 Intune Application Protection Policy SDK 버전을 정의합니다.",
- "requireAppPinDefault": "
등록된 디바이스에서 디바이스 잠금이 검색되면 예를 선택하여 앱 PIN을 사용하지 않도록 설정하세요.
",
- "targetAllApps1": "모든 관리 상태의 디바이스에 있는 앱에 대한 정책을 대상으로 하려면 이 옵션을 사용합니다.",
- "targetAllApps2": "정책 충돌을 해결하는 동안 사용자에게 특정 관리 상태를 대상으로 하는 정책이 있는 경우 이 설정은 대체됩니다.",
- "touchId2": "앱 액세스를 위해 PIN 대신 지문 ID를 요구하려면 {0}을(를) 선택합니다."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "사용자가 PIN을 재설정해야 하기 전에 지나야 하는 일수를 지정합니다.",
- "previousPinBlockCount": "이 설정은 Intune에서 유지할 이전 PIN 수를 지정합니다. 새 Pin은 Intune에서 유지 관리하는 PIN과 달라야 합니다."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "이렇게 하면 Windows Search에서 암호화된 데이터를 계속 검색할 수 있습니다.",
- "authoritativeIpRanges": "Windows의 IP 범위 자동 검색을 재정의하려면 이 설정을 사용하도록 설정합니다.",
- "authoritativeProxyServers": "Windows의 프록시 서버 자동 검색을 재정의하려면 이 설정을 사용합니다.",
- "checkInput": "입력의 유효성 확인",
- "dataRecoveryCert": "복구 인증서는 암호화 키가 손실되었거나 손상된 경우 암호화된 파일을 복구하는 데 사용할 수 있는 특별한 EFS(파일 시스템 암호화) 인증서입니다. 복구 인증서를 만들고 여기서 지정해야 합니다. 자세한 내용은 여기를 참조하세요.",
- "enterpriseCloudResources": "
회사용으로 처리하고 Windows Information Protection 정책으로 보호할 클라우드 리소스를 지정합니다. '|' 문자로 개별 항목을 구분하여 리소스를 여러 개 지정할 수 있습니다.
회사에 프록시가 구성되어 있는 경우 지정한 클라우드 리소스에 대한 트래픽을 어떤 프록시를 통해 라우트할지 지정할 수 있습니다.
URL[,Proxy]|URL[,Proxy]
프록시를 사용하지 않는 경우: contoso.sharepoint.com|contoso.visualstudio.com 프록시를 사용하는 경우: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
회사 네트워크를 구성하는 IPv4 범위를 지정합니다. 이러한 범위는 회사 네트워크 경계를 정의하기 위해 지정하는 엔터프라이즈 네트워크 도메인 이름과 함께 사용됩니다.
이 설정을 사용하려면 Windows Information Protection을 사용하도록 설정해야 합니다.
회사 네트워크를 구성하는 DNS 이름을 지정합니다. 이러한 이름은 회사 네트워크 경계를 정의하기 위해 지정하는 IP 범위와 함께 사용됩니다. 쉼표로 개별 항목을 구분하여 값을 여러 개 지정할 수 있습니다.
이 설정을 사용하려면 Windows Information Protection을 사용하도록 설정해야 합니다.
예: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
기업 네트워크를 형성하는 DNS 이름을 지정합니다. 이 이름은 기업 네트워크 경계를 정의하는 IP 범위와 함께 사용됩니다. '|' 문자로 개별 항목을 구분하여 여러 개의 값을 지정할 수 있습니다.
이 설정을 사용하려면 Windows Information Protection을 활성화해야 합니다.
예: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
회사 네트워크에 외부 대상 프록시가 있는 경우 여기에서 지정합니다. 프록시 서버 주소를 지정하는 경우 트래픽을 허용하고 Windows Information Protection을 통해 보호할 포트도 지정해야 합니다.
참고: 이 목록은 [엔터프라이즈 내부 프록시 서버] 목록에 있는 서버를 포함해서는 안 됩니다. 세미콜론으로 개별 항목을 구분하여 값을 여러 개 지정할 수 있습니다.
예: proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "디바이스가 유휴 상태로 전환된 후 디바이스의 PIN 또는 암호가 잠기게 되는 최대 허용 시간(분)을 지정합니다. 사용자는 설정 앱에 지정된 최대 시간보다 적은 기존 시간 제한 값을 선택할 수 있습니다. Lumia 950 및 950XL의 경우, 이 정책으로 설정된 값에 상관없이 최대 시간 제한 값이 5분입니다.",
- "maxInactivityTime2": "0(기본값) - 시간 제한이 정의되지 않았습니다. 기본값 '0'은 '시간 제한이 정의되지 않음'으로 해석됩니다.",
- "maxPasswordAttempts1": "이 정책은 모바일 디바이스 및 데스크톱에서 다양하게 동작합니다.",
- "maxPasswordAttempts2": "모바일 디바이스에서는 사용자가 이 정책에 의해 설정된 값에 도달하면 디바이스가 초기화됩니다.",
- "maxPasswordAttempts3": "데스크톱에서는 사용자가 이 정책에 의해 설정된 값에 도달하면 초기화되지 않습니다. 대신 데스크톱은 BitLocker 복구 모드로 전환되어 데이터가 액세스할 수는 없지만 복구는 가능한 상태가 됩니다. BitLocker를 사용하도록 설정하지 않은 경우 정책을 적용할 수 없습니다.",
- "maxPasswordAttempts4": "사용자는 실패한 시도 횟수 제한에 도달하기 전에 잠금 화면으로 전환되고 그 이상 실패하면 컴퓨터가 잠기게 된다는 경고를 받습니다. 사용자가 제한에 도달하면 디바이스가 자동으로 다시 부팅되고 BitLocker 복구 페이지가 표시됩니다. 이 페이지에서는 사용자에게 BitLocker 복구 키를 입력하라는 메시지를 표시합니다.",
- "maxPasswordAttempts5": "0(기본값) - PIN 또는 암호를 잘못 입력하면 디바이스가 초기화되지 않습니다.",
- "maxPasswordAttempts6": "모든 정책 값이 0인 경우 가장 안전한 값은 0입니다. 그렇지 않은 경우 최소 정책 값이 가장 안전한 값입니다.",
- "mdmDiscoveryUrl": "MDM에 등록하는 사용자가 사용할 MDM 등록 엔드포인트에 대한 URL을 지정합니다. 기본적으로 이 URL은 Intune에 대해 지정됩니다.",
- "minimumPinLength1": "PIN에 대해 필요한 최소 문자 수를 설정하는 정수 값입니다. 기본값은 4입니다. 이 정책 설정에 대해 구성할 수 있는 가장 적은 수는 4입니다. 구성할 수 있는 가장 큰 수는 최대 PIN 길이 정책 설정에 구성된 수 또는 127(둘 중 적은 수)보다 작아야 합니다.",
- "minimumPinLength2": "이 정책 설정을 구성하는 경우 PIN 길이는 이 숫자보다 크거나 같아야 합니다. 이 정책 설정을 사용하지 않거나 구성하지 않는 경우 PIN 길이는 4보다 크기가 같아야 합니다.",
- "name": "이 네트워크 경계의 이름",
- "neutralResources": "
회사에 인증 리디렉션 엔드포인트가 있으면 여기에 지정합니다. 여기에 지정된 위치는 리디렉션 이전의 연결 컨텍스트에 따라 개인용 또는 회사용으로 간주됩니다.
쉼표로 개별 항목을 구분하여 값을 여러 개 지정할 수 있습니다.
예: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Windows에 로그인하는 방법으로 비즈니스용 Windows Hello를 설정하는 값입니다.",
- "passportForWork2": "기본값은 true입니다. 이 정책을 false로 설정하는 경우 사용자는 프로비전이 필요한 Microsoft Entra 연결 모바일 휴대폰을 제외하고 비즈니스용 Windows Hello를 프로비전할 수 없습니다.",
- "pinExpiration": "이 정책 설정에 대해 구성할 수 있는 가장 큰 수는 730입니다. 이 정책 설정에 대해 구성할 수 있는 가장 작은 수는 0입니다. 이 정책을 0으로 설정하면 사용자의 PIN이 만료되지 않습니다.",
- "pinHistory1": "이 정책 설정에 대해 구성할 수 있는 가장 큰 수는 50입니다. 이 정책 설정에 대해 구성할 수 있는 가장 작은 수는 0입니다. 이 정책을 0으로 설정하면 이전 PIN의 스토리지가 필요하지 않습니다.",
- "pinHistory2": "사용자의 현재 PIN은 사용자 계정과 연결된 PIN 집합에 포함됩니다. PIN 기록이 PIN 초기화를 통해 유지되지 않습니다.",
- "protectUnderLock": "디바이스가 잠긴 상태인 동안 앱 콘텐츠를 보호합니다.",
- "protectionModeBlock": "
차단: 엔터프라이즈 데이터가 보호된 앱에서 나갈 수 없도록 차단합니다.
",
- "protectionModeOff": "
재정의 허용: 사용자가 보호된 앱에서 보호되지 않은 앱으로 데이터를 재배치하려고 할 때 메시지가 표시됩니다. 이 프롬프트를 재정의하도록 선택하면 작업이 기록됩니다.
",
- "protectionModeOverride": "
재정의 허용: 사용자가 보호된 앱에서 보호되지 않은 앱으로 데이터를 재배치하려고 할 때 메시지가 표시됩니다. 이 프롬프트를 재정의하도록 선택하면 작업이 기록됩니다.
",
- "protectionModeSilent": "
자동: 사용자가 보호된 앱에서 데이터를 재배치할 수 있습니다. 이러한 작업은 기록됩니다.
",
- "required": "필요한 공간",
- "revokeOnMdmHandoff": "Windows 10, 버전 1703에서 추가되었습니다. 이 정책은 디바이스가 MAM에서 MDM으로 업그레이드될 때 WIP 키를 취소할지 여부를 제어합니다. “끄기”로 설정하면 키가 취소되지 않으며 사용자는 업그레이드 후에도 보호된 파일에 계속 액세스할 수 있습니다. MDM 서비스가 MAM 서비스와 동일한 WIP EnterpriseID로 구성된 경우에 권장됩니다.",
- "revokeOnUnenroll": "그러면 디바이스가 이 정책에서 등록 취소될 때 암호화 키가 해지됩니다.",
- "rmsTemplateForEdp": "RMS 암호화에 대해 사용할 TemplateID GUID입니다. Azure RMS 템플릿을 통해 IT 관리자는 RMS로 보호된 파일에 액세스할 수 있는 사람과 액세스 가능한 기간에 대한 세부 정보를 구성할 수 있습니다.",
- "showWipIcon": "회사 컨텍스트에서 작업할 때 아이콘을 겹쳐서 표시하여 사용자에게 알립니다.",
- "useRmsForWip": "WIP에 대해 Azure RMS 암호화를 허용할지를 지정합니다."
- },
- "requireAppPin": "
등록된 디바이스에서 디바이스 잠금이 검색되면 예를 선택하여 앱 PIN을 사용하지 않도록 설정하세요.
참고: Intune은 iOS/iPadOS에서 타사 EMM 솔루션을 사용하여 디바이스 등록을 검색할 수 없습니다.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "앱을 설치하면 디바이스가 강제로 다시 시작될 수 있음",
- "basedOnReturnCode": "반환 코드에 따라 동작 결정",
- "force": "Intune에서 강제로 필수 디바이스를 다시 시작함",
- "suppress": "지정된 작업 없음"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "설치 시간 필요(분)",
- "maxRunTimeInMinutesToolTip": "시스템에서 설치 프로그램이 완료될 때까지 대기하는 시간(분)입니다. 기본값은 60분입니다."
- },
- "RunAsAccountOptions": {
- "system": "시스템",
- "user": "사용자"
- },
- "availableUninstall": "사용 가능한 제거 허용",
- "availableUninstallTooltip": "회사 포털에서 사용자에게 이 앱에 대한 제거 옵션을 제공하려면 '예'를 선택하세요. 사용자가 회사 포털에서 앱을 제거하지 못하도록 하려면 '아니요'를 선택합니다.",
- "bladeTitle": "프로그램",
- "deviceRestartBehavior": "디바이스 다시 시작 동작",
- "deviceRestartBehaviorTooltip": "앱을 설치한 후 디바이스 다시 시작 동작을 선택합니다. 반환 코드 구성 설정을 기준으로 디바이스를 다시 시작하려면 '반환 코드에 따라 동작 결정'을 선택합니다. MSI 기반 앱에 대한 앱 설치 중에 디바이스 다시 시작 관련 메시지를 표시하지 않으려면 '특정 작업 없음'을 선택하세요. 다시 시작 관련 메시지 표시 여부와 관계없이 앱 설치를 완료할 수 있도록 하려면 '앱 설치 시 강제로 디바이스 다시 시작'을 선택하세요. 앱을 설치한 후에 항상 디바이스를 다시 시작하려면 'Intune에서 강제로 필수 디바이스를 다시 시작함'을 선택합니다.",
- "header": "이 앱을 설치 및 제거하기 위한 명령 지정:",
- "installCommand": "설치 명령",
- "installCommandMaxLengthErrorMessage": "설치 명령은 허용되는 최대 길이인 1024자를 초과할 수 없습니다.",
- "installCommandTooltip": "이 앱을 설치하는 데 사용되는 전체 설치 명령줄입니다.",
- "runAs32Bit": "64비트 클라이언트에서 32비트 프로세스로 설치 및 제거 명령 실행",
- "runAs32BitTooltip": "64비트 클라이언트에서 32비트 프로세스로 앱을 설치 및 제거하려면 '예'를 선택합니다. 64비트 클라이언트에서 64비트 프로세스로 앱을 설치 및 제거하려면 '아니요'(기본값)를 선택합니다. 32비트 클라이언트에서는 항상 32비트 프로세스가 사용됩니다.",
- "runAsAccount": "설치 동작",
- "runAsAccountTooltip": "지원되는 경우 모든 사용자에 대해 이 앱을 설치하려면 '시스템'을 선택합니다. 디바이스에 로그인한 사용자에 대해 이 앱을 설치하려면 '사용자'를 선택합니다. 이중 목적 MSI 앱의 경우 원래 설치 시 디바이스에 적용된 값이 복원될 때까지 변경 내용으로 인해 업데이트 및 제거가 완료되지 않습니다.",
- "selectorLabel": "프로그램",
- "uninstallCommand": "제거 명령",
- "uninstallCommandTooltip": "이 앱을 제거하는 데 사용되는 전체 제거 명령줄입니다."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "새로 만들기",
- "createNewResourceAccountInfo": "
\r\n등록 중 새 리소스 계정을 만듭니다. 리소스 계정은 리소스 계정 테이블에 바로 추가되지만, 디바이스가 등록되고 Surface Hub 구독이 확인될 때까지 활성화되지 않습니다. 리소스 계정에 대한 자세한 정보
\r\n ",
- "createNewResourceTitle": "새 리소스 계정 만들기",
- "deviceNameInvalid": "디바이스 이름 형식이 잘못되었습니다.",
- "deviceNameRequired": "디바이스 이름이 필요합니다.",
- "editResourceAccountLabel": "편집",
- "selectExistingCommandMenu": "기존 선택"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "이름은 15자 이하여야 하며, 문자(a-z, A-Z), 숫자(0-9) 및 하이픈을 포함할 수 있습니다. 이름에 숫자만 사용해서는 안 됩니다. 이름은 공백을 포함할 수 없습니다."
- },
- "Header": {
- "addressableUserName": "친숙한 이름",
- "azureADDevice": "연결된 Microsoft Entra 디바이스",
- "batch": "그룹 태그",
- "dateAssigned": "할당된 날짜",
- "deviceAccountPwd": "장치 계정 암호",
- "deviceAccountUpn": "장치 계정",
- "deviceDisplayName": "디바이스 이름",
- "deviceFriendlyName": "디바이스 식별 이름",
- "deviceName": "디바이스 이름",
- "deviceUseType": "디바이스 사용 유형",
- "enrollmentState": "등록 상태",
- "intuneDevice": "연결된 Intune 디바이스",
- "lastContacted": "마지막 연결",
- "make": "제조업체",
- "model": "모델",
- "profile": "할당된 프로필",
- "profileStatus": "프로필 상태",
- "purchaseOrderId": "구매 주문",
- "resourceAccount": "리소스 계정",
- "serialNumber": "일련 번호",
- "userPrincipalName": "사용자"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "식별 이름은 필수 항목입니다.",
- "pwdRequired": "암호는 필수 항목입니다.",
- "pwdValidFormat": "암호를 업데이트할 수 없습니다. 새 암호에 제공된 값이 도메인의 길이 또는 복잡성 요구 사항을 충족하지 않습니다.",
- "upnRequired": "장치 계정은 필수 항목입니다",
- "upnValidFormat": "값에는 문자(a-z, A-Z), 숫자(0-9) 및 하이픈이 포함될 수 있습니다. 값에는 공백이 포함될 수 없습니다."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "모임 및 프레젠테이션",
- "teamCollaboration": "팀 협업"
- },
- "Devices": {
- "featureDescription": "Windows Autopilot을 사용하면 사용자의 OOBE(첫 실행 경험)를 사용자 지정할 수 있습니다.",
- "importErrorStatus": "일부 디바이스를 가져오지 못했습니다. 자세한 내용을 보려면 여기를 클릭하세요.",
- "importPendingStatus": "가져오기가 진행 중입니다. 경과된 시간: {0}분. 이 프로세스에는 최대 {1}분이 소요될 수 있습니다."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Microsoft Entra 하이브리드 조인됨",
- "activeDirectoryADLabel": "Autopilot을 사용한 Microsoft Entra 하이브리드 조인",
- "azureAD": "Microsoft Entra 조인됨",
- "unknownType": "알 수 없는 유형"
- },
- "Filter": {
- "enrollmentState": "상태",
- "profile": "프로필 상태"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "사용자 이름은 비워 둘 수 없습니다."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "명명 템플릿을 만들어 등록하는 동안 디바이스에 이름을 추가합니다.",
- "label": "디바이스 이름 템플릿 적용"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "Microsoft Entra 하이브리드 조인된 형식의 Autopilot 배포 프로필의 경우 디바이스 이름이 도메인 조인 구성에 지정된 설정을 사용하여 지정됩니다."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MyCompany-%RAND:4%",
- "label": "이름 입력",
- "noDisallowedChars": "이름에는 영숫자 문자, 하이픈, %SERIAL% 또는 %RAND:x%만 사용해야 합니다.",
- "serialLength": "%SERIAL%에 7개가 넘는 문자를 사용할 수 없습니다.",
- "validateLessThan15Chars": "이름은 15자 이하여야 합니다.",
- "validateNoSpaces": "컴퓨터 이름에는 공백이 포함될 수 없습니다.",
- "validateNotAllNumbers": "이름에는 문자 및/또는 하이픈도 사용해야 합니다.",
- "validateNotEmpty": "이름은 비워 둘 수 없습니다.",
- "validateOnlyOneMacro": "이름에는 %SERIAL% 또는 %RAND:x% 중 하나만 사용해야 합니다."
+ "ScopeTypes": {
+ "allDevices": "모든 디바이스",
+ "allUsers": "모든 사용자",
+ "allUsersAndDevices": "모든 사용자 및 모든 디바이스",
+ "selectedGroups": "선택된 그룹"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "설명",
+ "placeholder": "설명 입력"
+ },
+ "NameTextBox": {
+ "label": "이름",
+ "placeholder": "이름 입력"
+ },
+ "PublisherTextBox": {
+ "label": "게시자",
+ "placeholder": "게시자 입력"
+ },
+ "VersionTextBox": {
+ "label": "버전"
+ },
+ "headerDescription": "작성한 검색 및 재구성 스크립트에서 새 사용자 지정 스크립트 패키지를 만듭니다."
},
- "ConfigureComputerNameTemplate": {
- "description": "디바이스의 고유 이름을 만듭니다. 이름은 15자 이하여야 하며, 문자(a-z, A-Z), 숫자(0-9) 및 하이픈을 포함할 수 있습니다. 이름에 숫자만 사용해서는 안 됩니다. 이름에 공백을 사용할 수 없습니다. 하드웨어 특정 일련 번호를 추가하려면 %SERIAL% 매크로를 사용합니다. 또는 %RAND:x% 매크로를 사용하여 임의 숫자 문자열을 추가합니다. 여기서 x는 추가할 자릿수와 같습니다."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "디바이스를 등록하고 모든 시스템 컨텍스트 앱 및 설정을 프로비전하기 위해 Windows 키를 5번 눌러 사용자 인증 없이 OOBE를 실행하도록 설정합니다. 사용자가 로그인하면 사용자 컨텍스트 앱 및 설정이 제공됩니다.",
- "label": "사전 프로비전된 배포 허용"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Autopilot Microsoft Entra 하이브리드 흐름은 OOBE 중에 도메인 컨트롤러 연결을 설정하지 않는 경우에도 계속 진행됩니다.",
- "label": "AD 연결 확인 건너뛰기"
- },
- "accountType": "사용자 계정 유형",
- "accountTypeInfo": "사용자가 디바이스에서 관리자인지 아니면 표준 사용자인지를 지정합니다. 이 설정은 전역 관리자 또는 회사 관리자 계정에는 적용되지 않습니다. 이러한 계정은 Microsoft Entra ID에서 모든 관리 기능에 액세스할 수 있으므로 표준 사용자일 수 없습니다.",
- "configOOBEInfo": "
\r\nAutopilot 디바이스의 첫 실행 경험 구성\r\n
",
- "configureDevice": "배포 모드",
- "configureDeviceHintForSurfaceHub2": "Autopilot은 Surface Hub 2의 자체 배포 모드만 지원합니다. 이 모드는 등록된 디바이스와 사용자를 연결하지 않으므로 사용자 자격 증명이 필요하지 않습니다.",
- "configureDeviceHintForWindowsPC": "
\r\n 배포 모드는 디바이스를 프로비전하기 위해 사용자가 자격 증명을 제공해야 하는지를 제어합니다.\r\n
\r\n
\r\n
\r\n 사용자 구동: 디바이스가 디바이스를 등록하는 사용자와 연결되고 디바이스를 프로비전하는 데 사용자 자격 증명이 필요합니다.\r\n
\r\n
\r\n 자체 배포(미리 보기): 디바이스가 디바이스를 등록하는 사용자와 연결되지 않고 디바이스를 프로비전하는 데 사용자 자격 증명이 필요하지 않습니다.\r\n
\r\n
",
- "createSurfaceHub2Info": "Surface Hub 2 디바이스의 Autopilot 등록 설정을 구성합니다. 기본적으로 Autopilot을 사용하면 OOBE 동안 사용자 인증을 건너뛸 수 있습니다. Surface Hub 2용 Windows Autopilot에 대해 자세히 알아보세요.",
- "createWindowsPCInfo": "\r\n
\r\n자체 배포 모드에서는 Autopilot 디바이스에 대해 다음 옵션이 자동으로 사용하도록 설정됩니다.\r\n
\r\n
\r\n
\r\n 회사 또는 집 사용 선택 건너뛰기\r\n
\r\n
\r\n OEM 등록 및 OneDrive 구성 건너뛰기\r\n
\r\n
\r\n OOBE에서 사용자 인증 건너뛰기\r\n
\r\n
",
- "endUserDevice": "사용자 구동",
- "hideEscapeLink": "계정 변경 옵션 숨기기",
- "hideEscapeLinkInfo": "회사 로그인 페이지 및 도메인 오류 페이지에서 초기 디바이스 설정 중에 계정을 변경하는 옵션과 다른 계정으로 다시 시작하는 옵션이 각각 나타납니다. 이러한 옵션을 숨기려면 Microsoft Entra ID에서 회사 브랜딩을 구성해야 합니다(Windows 10, 1809 이상, 또는 Windows 11 필요).",
- "info": "AutoPilot 프로필 설정은 사용자가 Windows를 처음으로 시작할 때 표시되는 첫 실행 경험을 정의합니다. ",
- "language": "언어(지역)",
- "languageInfo": "사용할 언어 및 지역을 지정하세요.",
- "licenseAgreement": "Microsoft 소프트웨어 사용 조건",
- "licenseAgreementInfo": "사용자에게 EULA를 표시할지 여부를 지정합니다.",
- "plugAndForgetDevice": "자체 배포",
- "privacySettingWarning": "Windows 10, 버전 1903 이상, 또는 Windows 11을 실행하는 디바이스의 진단 데이터 수집에 대한 기본값이 변경되었습니다. ",
- "privacySettings": "개인 정보 설정",
- "privacySettingsInfo": "사용자에게 개인 정보 설정을 표시할지 여부를 지정합니다.",
- "showCortanaConfigurationPage": "Cortana 구성",
- "showCortanaConfigurationPageInfo": "[표시]는 시작하는 동안 Cortana 구성 소개를 활성화합니다.",
- "skipEULAWarning": "사용 조건 숨기기에 대한 중요 정보",
- "skipKeyboardSelection": "자동으로 키보드 구성",
- "skipKeyboardSelectionInfo": "true이면 [언어]가 설정된 경우 키보드 선택 페이지를 건너뜁니다.",
- "subtitle": "AutoPilot 프로필",
- "title": "OOBE(첫 실행 경험)",
- "useOSDefaultLanguage": "운영 체제 기본값",
- "userSelect": "사용자 선택"
- },
- "Sync": {
- "lastRequestedLabel": "마지막 동기화 요청",
- "lastSuccessfulLabel": "마지막으로 성공한 동기화",
- "syncInProgress": "동기화 진행 중입니다. 잠시 후 다시 확인하세요.",
- "syncInitiated": "AutoPilot 설정 동기화가 시작되었습니다.",
- "syncSettingsTitle": "AutoPilot 설정 동기화"
- },
- "Title": {
- "devices": "Windows AutoPilot 디바이스"
- },
- "Tooltips": {
- "addressableUserName": "디바이스를 설치하는 동안 표시되는 인사말 이름입니다.",
- "azureADDevice": "연결된 디바이스에 대한 디바이스 세부 정보로 이동합니다. 해당 없음은 연결된 디바이스가 없음을 의미합니다.",
- "batch": "디바이스 그룹을 식별하는 데 사용할 수 있는 문자열 특성입니다. Intune의 그룹 태그 필드는 Microsoft Entra 디바이스에서 OrderID 특성에 매핑됩니다.",
- "dateAssigned": "디바이스에 프로필이 할당되었을 때의 타임스탬프입니다.",
- "deviceAccountPwd": "Surface Hub 디바이스에 대한 디바이스 계정 암호입니다. 암호를 입력하는 경우 디바이스 계정과 식별 이름도 입력합니다.",
- "deviceAccountUpn": "Surface Hub 디바이스에 대한 디바이스 계정 전자 메일입니다. 전자 메일을 입력하는 경우 디바이스 계정 암호와 식별 이름도 입력합니다.",
- "deviceDisplayName": "디바이스에 고유한 이름을 구성합니다. 이 이름은 Microsoft Entra 하이브리드 조인된 배포에서 무시됩니다. 디바이스 이름은 Microsoft Entra 하이브리드 디바이스에 대한 도메인 조인 프로필에서 계속 제공됩니다.",
- "deviceFriendlyName": "Surface Hub 디바이스에 대한 디바이스 식별 이름입니다. 식별 이름을 입력하는 경우 디바이스 계정과 디바이스 계정 암호도 입력합니다.",
- "deviceName": "누군가가 디바이스를 검색하고 연결하려고 할 때 표시되는 이름입니다.",
- "deviceUseType": " 선택에 따라 디바이스가 설정됩니다. 나중에 언제든지 설정에서 변경할 수 있습니다.\r\n
\r\n
모임과 프레젠테이션의 경우 Windows Hello가 켜지지 않으며 각 세션 후 데이터가 제거됩니다.\r\n
\r\n
팀 협업의 경우 Windows Hello가 켜지며 빠른 로그인을 위해 프로필이 저장됩니다.
\r\n
",
- "enrollmentState": "디바이스가 등록되었는지를 지정합니다.",
- "intuneDevice": "연결된 디바이스에 대한 디바이스 세부 정보로 이동합니다. 해당 없음은 연결된 디바이스가 없음을 의미합니다.",
- "lastContacted": "디바이스에 마지막으로 연결한 때의 타임스탬프입니다.",
- "make": "선택한 디바이스의 제조업체입니다.",
- "model": "선택한 디바이스의 모델",
- "profile": "디바이스에 할당된 프로필의 이름입니다.",
- "profileStatus": "프로필이 디바이스에 할당되는지를 지정합니다.",
- "purchaseOrderId": "구매 주문 ID",
- "resourceAccount": "디바이스의 ID 또는 UPN(사용자 계정 이름)입니다.",
- "serialNumber": "선택한 디바이스의 일련 번호입니다.",
- "userPrincipalName": "디바이스를 설치하는 동안 인증을 미리 채우는 사용자입니다."
- },
- "allDevices": "모든 장치",
- "allDevicesAlreadyAssignedError": "Autopilot 프로필이 이미 모든 디바이스에 할당되었습니다.",
- "assignFailedDescription": "{0}에 대한 할당을 업데이트하지 못했습니다.",
- "assignFailedTitle": "Autopilot 프로필 할당을 업데이트하지 못했습니다.",
- "assignSuccessDescription": "{0}에 대한 할당을 업데이트했습니다.",
- "assignSuccessTitle": "AutoPilot 프로필 할당을 업데이트했습니다.",
- "assignSufaceHub2ProfileNextStep": "이 배포에 대한 다음 단계",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. 하나 이상의 디바이스 그룹에 이 프로필을 할당합니다.",
- "assignSurfaceHub2ProfileToResourceAccount": "2. 이 프로필을 배포하는 각 Surface Hub 디바이스에 리소스 계정을 할당합니다.",
- "assignedDevicesCount": "할당된 디바이스",
- "assignedDevicesResourceAccountDescription": "
이 프로필을 디바이스에 배포하려면 디바이스에 리소스 계정을 할당해야 합니다. 한 번에 디바이스 하나를 선택하여 기존 리소스 계정을 할당하거나 새 리소스 계정을 만듭니다. 리소스 계정에 대한 자세한 정보
",
- "assignedDevicesResourceAccountStatusBarMessage": "이 테이블은 이 프로필에 할당된 Surface Hub 2 디바이스만 나열합니다.",
- "assigningDescription": "{0}에 대한 할당을 업데이트하는 중입니다.",
- "assigningTitle": "AutoPilot 프로필 할당을 업데이트하는 중입니다.",
- "autoremediationContext": "이 장치에서 하드웨어 변경이 감지되었습니다. 새 하드웨어를 자동으로 등록하려고 합니다. 이제 아무것도 할 필요가 없습니다. 상태는 다음에 체크 인할 때 결과와 함께 업데이트됩니다. 프로필 다시 설정에 대해 자세히 알아보세요.",
- "autoremediationTitle": "장치 {0}에 수정이 보류 중입니다.",
- "cannotDeleteMessage": "이 프로필은 그룹에 할당되어 있습니다. 이 프로필을 삭제하려면 먼저 이 프로필에서 모든 그룹을 할당 해제해야 합니다.",
- "cannotDeleteTitle": "{0}을(를) 삭제할 수 없습니다.",
- "createdDateTime": "만든 날짜",
- "deleteMessage": "이 AutoPilot 프로필을 삭제하면 이 프로필에 할당된 디바이스는 모두 [할당되지 않음]으로 표시됩니다.",
- "deleteMessageWithPolicySet": "{0}은(는) 하나 이상의 정책 집합에 포함되어 있습니다. {0}을(를) 삭제하면 이러한 정책 집합을 통해 더 이상 할당할 수 없게 됩니다.",
- "deleteTitle": "이 프로필을 삭제하시겠습니까?",
- "description": "설명",
- "deviceType": "디바이스 유형",
- "deviceUse": "디바이스 사용",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot은 Surface Hub 2 디바이스에 조인된 Microsoft Entra만 지원합니다. 조직에서 디바이스의 AD(Active Directory) 조인 방법을 지정하세요.\r\n
\r\n
\r\n
\r\n Microsoft Entra 조인됨: 온-프레미스 Windows Server Active Directory가 없는 클라우드만\r\n
\r\n 조직에서 디바이스를 AD(Active Directory)에 조인하는 방법을 지정합니다.\r\n
\r\n
\r\n
\r\n Microsoft Entra 조인됨: 온-프레미스 Windows Server Active Directory를 사용하지 않는 클라우드 전용입니다.\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "할당된 디바이스 수를 페치하는 동안 오류가 발생했습니다.",
- "getAssignmentsError": "Autopilot 프로필 할당을 페치하는 동안 오류가 발생했습니다.",
- "harvestDeviceId": "모든 대상 디바이스를 Autopilot으로 변환",
- "harvestDeviceIdDescription": "기본적으로 이 프로필은 Autopilot 서비스에서 동기화된 Autopilot 디바이스에만 적용할 수 있습니다.",
- "harvestDeviceIdInfo": "\r\n 이미 등록되지 않은 경우 대상이 지정된 모든 디바이스를 Autopilot에 등록하려면 [예]를 선택합니다. 다음번에 등록된 디바이스가 Windows OOBE(첫 실행 경험)를 진행하면 할당된 Autopilot 시나리오가 진행됩니다.\r\n \r\n 특정 Autopilot 시나리오는 최소한의 특정 Windows 빌드가 필요합니다. 시나리오를 진행하려면 디바이스에 필요한 최소한의 빌드가 있는지 확인하세요.\r\n \r\n 이 프로필을 제거해도 Autopilot에서 영향을 받는 디바이스는 제거되지 않습니다. Autopilot에서 디바이스를 제거하려면 Windows Autopilot 디바이스 보기를 사용하세요.\r\n ",
- "harvestDeviceIdWarning": "Autopilot 디바이스를 변환한 후에는 Autopilot 디바이스 목록에서 삭제를 해야만 되돌릴 수 있습니다.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Windows AutoPilot 배포 프로필을 사용하면 디바이스의 첫 실행 경험을 사용자 지정할 수 있습니다.",
- "invalidProfileNameMessage": "문자 \"{0}\"은(는) 허용되지 않습니다.",
- "joinTypeLabel": "Microsoft Entra ID에 다음으로 조인",
- "lastModifiedDateTime": "마지막으로 수정한 날짜:",
- "manualRemediationContext": "이 장치에서 하드웨어 변경이 감지되었습니다. 장치를 다시 등록하지 않는 한 다시 설정될 때 Autopilot 프로필을 자동으로 수신하지 않습니다. 프로필 다시 설정에 대해 자세히 알아보세요.",
- "manualRemediationTitle": "장치 {0}에 주의가 필요합니다",
- "name": "이름",
- "noAutopilotProfile": "AutoPilot 프로필 없음",
- "notEnoughPermissionAssignedError": "이 프로필을 선택한 하나 이상의 그룹에 할당할 권한이 없습니다. 관리자에게 문의하세요.",
- "profile": "프로필",
- "resourceAccountStatusBarMessage": "이 프로필이 배포되는 각 Surface Hub 2 디바이스의 리소스 계정이 필요합니다. 자세히 알아보려면 여기를 클릭하세요.",
- "selectServices": "디바이스가 조인할 디렉터리 서비스 선택",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "배포 모드",
- "windowsPCCommandMenu": "Windows PC",
- "directoryServiceLabel": "Microsoft Entra ID에 다음으로 조인"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "관리자 그룹",
- "RoleAssignmentAdminDesc": "관리자 그룹 사용자는 이 역할에 할당된 관리자입니다.",
- "rolesMenuTitle": "Endpoint Manager 역할",
- "RoleAssignmentScopeDesc": "이 역할 할당의 관리자는 정책, 애플리케이션 및 원격 작업을 대상으로 지정할 수 있음",
- "RoleAssignmentScope": "범위 그룹"
- },
+ "ScopeTags": {
+ "headerDescription": "스크립트 패키지를 할당할 그룹을 하나 이상 선택합니다."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "검색 스크립트",
+ "placeholder": "입력 스크립트 텍스트",
+ "requiredValidationMessage": "검색 스크립트를 입력하세요."
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "스크립트 서명 확인 적용"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "로그온된 자격 증명을 사용하여 이 스크립트 실행"
+ },
+ "RemediationScript": {
+ "infoBox": "이 스크립트는 재구성 스크립트가 없기 때문에 검색 전용 모드에서 실행됩니다."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "재구성 스크립트",
+ "placeholder": "입력 스크립트 텍스트"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "64비트 PowerShell에서 스크립트 실행"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "유효하지 않은 스크립트입니다. 스크립트에 사용된 하나 이상의 문자가 유효하지 않습니다."
+ },
+ "headerDescription": "작성한 스크립트에서 사용자 지정 스크립트 패키지를 만듭니다. 기본적으로 스크립트는 할당된 디바이스에서 매일 실행됩니다.",
+ "infoBox": "이 스크립트는 읽기 전용입니다. 이 스크립트에 대한 일부 설정이 사용하지 않도록 설정될 수 있습니다."
+ },
+ "title": "사용자 지정 스크립트 만들기",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "간격",
+ "time": "날짜 및 시간"
+ },
+ "Interval": {
+ "day": "매일 반복",
+ "days": "{0}일마다 반복",
+ "hour": "매시간 반복",
+ "hours": "{0}시간마다 반복",
+ "month": "매달 반복",
+ "months": "{0}개월마다 반복",
+ "week": "매주 반복",
+ "weeks": "{0}주마다 반복"
+ },
+ "Time": {
+ "utc": "{0}(UTC)",
+ "utcWithDate": "{0}(UTC)({1})",
+ "withDate": "{0}({1})"
+ }
+ }
+ },
+ "Edit": {
+ "title": "편집 - {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "기술자 단계에서 선택한 차단 앱만 실패",
- "apps": "앱",
- "appsListName": "애플리케이션 목록",
- "blockingApps": "차단 앱",
- "managedApps": "관리되는 앱",
- "noApps": "애플리케이션 없음",
- "noAppsError": "애플리케이션을 검색하는 동안 오류가 발생했습니다.",
- "selectApps": "앱 선택",
- "selectedAppsCount": "{0}개의 앱이 선택됨(최대 100개)",
- "useSelectedAppsAll": "모두",
- "useSelectedAppsSelected": "선택한 상태",
- "useSelectedAppsToggleLabel": "사용자/디바이스에 할당된 경우 필수 앱이 설치될 때까지 디바이스 사용 차단"
- },
- "Header": {
- "application": "애플리케이션",
- "publisher": "게시자",
- "version": "버전"
- },
- "SearchBox": {
- "ariaLabel": "앱 검색",
- "placeHolder": "이름 또는 게시자로 검색"
- },
- "allowToUseToggle": "설치 오류가 발생하는 경우 사용자가 디바이스를 사용할 수 있도록 허용",
- "blockToggle": "모든 앱 및 프로필이 설치될 때까지 디바이스 사용 차단",
- "blockToolTip": "예를 들어 이 목록에 Microsoft Word를 추가하면 대상 사용자와 장치는 Word가 성공적으로 설치될 때까지 등록 상태 페이지를 나갈 수 없습니다.",
- "collectLogToggle": "최종 사용자에 대한 로그 수집 및 진단 페이지 켜기",
- "create": "프로필 만들기",
- "customMessageTextBox": "오류 메시지",
- "customMessageToggle": "시간 제한 또는 오류 발생 시 사용자 지정 메시지 표시",
- "enableForAutopilotOnlyToggle": "OOBE(첫 실행 경험)로 프로비저닝된 디바이스에만 페이지를 표시합니다.",
- "installQualityUpdatesToggle": "Windows 품질 업데이트 설치(디바이스를 다시 시작할 수 있음)(미리 보기)",
- "progressToggle": "앱 및 프로필 구성 진행률 표시",
- "resetToggle": "설치 오류가 발생하는 경우 사용자가 디바이스를 초기화할 수 있도록 허용",
- "timeout": "설치 작업이 지정된 시간(분)보다 오래 걸리는 경우 오류 표시"
- },
+ "OfficeUpdateChannel": {
+ "current": "현재 채널",
+ "deferred": "반기 엔터프라이즈 채널",
+ "firstReleaseCurrent": "현재 채널(미리 보기)",
+ "firstReleaseDeferred": "반기 엔터프라이즈 채널(미리 보기)",
+ "monthlyEnterprise": "월 단위 기업 채널",
+ "placeHolder": "하나 선택"
+ },
"TableHeaders": {
"activity": "활동",
"activityName": "작업 이름",
@@ -1293,30 +417,175 @@
"excludedGroups": "제외된 그룹",
"licenseType": "라이선스 형식"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "사용자가 업무용으로 앱에 액세스하기 위해 충족해야 하는 PIN 및 자격 증명 요구 사항을 구성합니다."
- },
- "DataProtection": {
- "infoText": "이 그룹에는 잘라내기, 복사, 붙여넣기, 저장 제한과 같은 DLP(데이터 유실 방지) 컨트롤이 포함됩니다. 이 설정은 사용자가 앱의 데이터와 상호작용하는 방법을 결정합니다."
- },
- "DeviceTypes": {
- "selectOne": "하나 이상의 디바이스 유형을 선택합니다."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "모든 디바이스 유형에 있는 앱으로 대상 지정"
- },
- "infoText": "다른 디바이스의 앱에 이 정책을 적용하는 방법을 선택한 다음 앱을 하나 이상 추가합니다.",
- "selectOne": "정책을 만들려면 앱을 하나 이상 선택하세요."
- }
- },
- "AssignmentAction": {
- "exclude": "제외",
- "include": "포함됨",
- "includeAllDevicesVirtualGroup": "포함됨",
- "includeAllUsersVirtualGroup": "포함됨"
- },
+ "Inputs": {
+ "accountDomain": "계정 도메인",
+ "accountDomainHint": "예: contosodomain",
+ "accountDomainInfoBalloon": "사용자의 계정 도메인을 지정합니다.",
+ "accountTypeInfoBalloon": "인증 모델에 따라 구성할 계정 유형을 지정합니다.",
+ "allowContactSetting": "사용자가 연락처 설정을 변경할 수 있도록 허용",
+ "allowContactSyncInfoBalloon": "사용자가 연락처 동기화 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "allowUserChange": "사용자가 설정을 변경할 수 있도록 허용",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "com.microsoft.word와 비슷한 패키지 이름을 입력하세요.",
+ "androidUrlValidation": "유효한 URL을 입력하세요(예: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en).",
+ "appInstallContext": "앱 설치 컨텍스트",
+ "appUrlLabel": "앱 스토어 URL",
+ "appleUrlValidation": "유효한 URL을 입력하세요(https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8).",
+ "applicableDeviceType": "적용할 수 있는 디바이스 유형",
+ "assignmentActionLabel": "모드",
+ "authenticationMethodInfoBalloon": "사용자에 대한 인증 방법을 지정합니다.",
+ "authenticationMetod": "인증 방법",
+ "authenticationType": "인증 형식",
+ "authenticationTypeInfoBalloon": "사용자의 인증 형식 지정",
+ "availableLicenseCount": "사용 가능한 라이선스",
+ "basicAuth": "기본 인증",
+ "biometricsInfoBalloon": "사용자가 디바이스의 앱에 액세스하기 위해 TouchID 또는 FaceID 같은 생체 인식이 필요할 수 있습니다. 필요한 경우 생체 인식은 이 프로필에서 선택한 인증 방법과 함께 사용됩니다. 앱 보호 정책에 관리되는 데이터에 액세스하기 전 액세스 요구 사항이 포함되므로, Intune 앱 보호 정책이 배포될 때 이 설정은 사용하도록 설정되어 있지 않아야 합니다. 둘 다 사용하도록 설정하면 Outlook 모바일에 액세스하기 위한 여러 액세스 프롬프트가 발생합니다. 구성되지 않도록 설정하면 기본 앱 설정이 [끄기]로 설정됩니다. ",
+ "bookNameLabel": "책 이름",
+ "bundleDescriptionHint": "포함된 앱을 기술하는 설명을 입력합니다.",
+ "calendar": "일정",
+ "categoryLabel": "범주",
+ "categoryNameLabel": "기본 이름",
+ "certProfileType": "인증서 프로필 유형",
+ "certificate": "인증서",
+ "certificates": "인증서",
+ "commandLineLabel": "명령줄 인수",
+ "commandLineSizeHint": "명령줄 인수 텍스트의 최대 길이는 1024자입니다.",
+ "configurationSettingsFormatLabel": "구성 설정 형식",
+ "configurationSettingsLabel": "설정 형식",
+ "contactSync": "연락처 저장",
+ "contactSyncInfoBalloon": "모바일 디바이스의 기본 주소록에 연락처를 저장하면 새 통화 및 텍스트 메시지를 사용자의 기존 Outlook 연락처에 연결할 수 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [끄기]로 설정됩니다.",
+ "contacts": "연락처",
+ "createdDateTime": "만든 날짜",
+ "defaultCategoryHint": "기본 범주를 변경할 수 없습니다.",
+ "deploySMimeCertsFromIntune": "Intune에서 S/MIME 인증서 배포",
+ "descriptionGenericLabel": "설명",
+ "descriptionHint": "설명 입력...",
+ "descriptionLabel": "설명",
+ "descriptionSizeHint": "설명은 10,000자를 초과할 수 없습니다.",
+ "developerLabel": "개발자",
+ "developerSizeHint": "개발자 이름의 최대 길이는 256자입니다.",
+ "disable": "사용 안 함",
+ "disabled": "사용 안 함",
+ "displayNameLabel": "이름",
+ "displayVersionHint": "앱 버전 입력",
+ "displayVersionLabel": "앱 버전",
+ "displayVersionLengthCheck": "디스플레이 버전의 길이는 최대 130자여야 합니다.",
+ "eBookCategoryNameLabel": "기본 이름",
+ "emailAccount": "메일 계정 이름",
+ "emailAccountHint": "예: 회사 메일",
+ "emailAccountInfoBalloon": "사용자의 디바이스에서 사용자에게 메일 계정을 표시할 표시 이름을 지정합니다.",
+ "emailAddressAttribute": "Microsoft Entra ID의 이메일 주소 속성",
+ "emailAddressInfoBalloon": "메일을 보내고 받는 데 사용할 메일 주소를 지정합니다.",
+ "emailServer": "메일 서버",
+ "emailServerHint": "예: mail.contoso.com",
+ "emailServerInfoBalloon": "Exchange Server의 호스트 이름을 지정합니다.",
+ "enable": "사용",
+ "enableSMime": "S/MIME 사용",
+ "enabled": "사용",
+ "encryptAllEmails": "모든 메일 암호화",
+ "encryptionCertificates": "암호화 인증서",
+ "endUserNotifications": "최종 사용자 알림",
+ "enrollmentTypeLabel": "디바이스 등록 유형",
+ "externalRecipients": "외부 받는 사람 메일 설명",
+ "externalRecipientsInfoBalloon": "보낸 사람이 외부 받는 사람을 추가하거나 외부 받는 사람이 포함된 메일 그룹을 추가하면 외부 받는 사람 메일 설명이 표시됩니다. 이 메일 설명은 작성하는 메시지가 조직에서 나갈지를 보낸 사람에게 알려 단어, 어조 및 내용을 올바르게 결정할 수 있도록 합니다. 하이브리드 최신 인증을 사용하는 Exchange Online 계정 및 온-프레미스 계정에만 사용할 수 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [켜기]로 설정됩니다.",
+ "focusedInbox": "중요 받은 편지함",
+ "focusedInboxInfoBalloon": "중요 받은 편지함은 받은 편지함을 [중요]와 [기타]의 두 탭으로 나눕니다. 가장 중요한 메일은 [중요] 탭에 있으며, 나머지 메일은 여전히 쉽게 액세스할 수 있지만 방해되지 않도록 [기타] 탭에 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [켜기]로 설정됩니다. ",
+ "fullScreenEnabledLabel": "전체 화면",
+ "gmailNineAmountOfEmail": "동기화할 메일 양",
+ "gmailNineAuthenticationMethodInfoBalloon": "사용자가 VPN 서버에 인증하는 방법을 선택합니다. 인증서를 사용하여 가장 안전하고 원활한 환경을 최종 사용자에게 제공하세요. 인증 방법을 선택하세요. 디바이스 소유자 디바이스에 대한 SCEP 및 PKCS 인증서 프로필을 사용할 수 없으므로 인증서 기반 인증을 아직 사용할 수 없습니다. ",
+ "gmailNineCertificateUPNInfoBalloon": "인증서에 UPN(사용자 계정 이름)이 주체 대체 이름으로 포함되어야 합니다.",
+ "gmailNineEmailAddressInfoBalloon": "Intune이 Microsoft Entra ID에서 가져오는 속성은 프로필에서 사용할 이메일 주소를 동적으로 생성합니다. MyName@contoso.com(UPN). 이메일 프로필의 Microsoft Entra 속성에 대해 자세히 알아보세요.",
+ "gmailNineEmailServerInfoBalloon": "지정한 앱이 연결되어 메일을 가져오는 메일 서버의 Exchange 위치(URL)입니다.",
+ "gmailNineEmailSynchronizeInfoBalloon": "클라이언트에서 동기화할 메일 수를 제어합니다.",
+ "gmailNineSSLInfoBalloon": "SSL을 사용하여 메일 서버와의 모든 통신을 보호합니다.",
+ "gmailNineUsernameInfoBalloon": "Intune이 Microsoft Entra ID에서 가져오는 속성은 프로필에서 사용할 사용자 이름을 동적으로 생성합니다. MyName@contoso.com(UPN) 또는 MyName(사용자 이름). 이메일 프로필의 Microsoft Entra 속성에 대해 자세히 알아보세요.",
+ "ignoreManifestScope": "매니페스트 범위 무시",
+ "ignoreVersionDetection": "앱 버전 무시",
+ "informationUrlLabel": "정보 URL",
+ "informationUrlSizeHint": "정보 URL의 최대 길이는 1024자입니다.",
+ "installAsManaged": "관리형으로 설치",
+ "installationSourceLabel": "앱 유형",
+ "installerTypeInfoBalloon": "애플리케이션 패키지의 설치 관리자 유형입니다.",
+ "installerTypeLabel": "설치 관리자 유형",
+ "isFeatured": "회사 포털에서 이 항목을 추천 앱으로 표시",
+ "isMAMEnabledToggleLabel": "예",
+ "lastModifiedDateTime": "마지막 업데이트 시간",
+ "ldapUrl": "LDAP URL",
+ "licensingType": "디바이스 컨텍스트 할당 지원",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "최소 운영 체제",
+ "modernAuth": "최신 인증",
+ "nameHint": "이름 입력",
+ "nameLabel": "이름",
+ "nameSizeHint": "이름의 최대 길이는 512자입니다.",
+ "notConfigured": "구성되지 않음",
+ "notesLabel": "참고",
+ "notesSizeHint": "메모 텍스트의 최대 길이는 1024자입니다.",
+ "notificationType": "알림 유형",
+ "oneDay": "1일",
+ "oneMonth": "1개월",
+ "oneWeek": "1주",
+ "outlookSMimeSettings": "Outlook S/MIME 설정",
+ "ownerLabel": "소유자",
+ "ownerSizeHint": "소유자 이름의 최대 길이는 256자입니다.",
+ "packageIdLabel": "패키지 식별자",
+ "packageNameLabel": "패키지 이름",
+ "pivCredentialNotConfigured": "테넌트의 파생된 자격 증명 발급자를 선택하지 않았습니다. 이 정책을 디바이스에 적용하려면 발급자를 구성해야 합니다.",
+ "platformLabel": "플랫폼",
+ "policyDescriptionLabel": "설명",
+ "policyNameLabel": "이름",
+ "preComposedIconEnabled": "미리 구성됨",
+ "primarySMTPAddress": "기본 SMTP 주소",
+ "privacyUrlLabel": "개인정보취급방침 URL",
+ "publisherHint": "게시자 이름을 입력하세요.",
+ "publisherLabel": "게시자",
+ "publisherSizeHint": "판매자 이름의 길이는 2자에서 1024자(포함) 사이여야 합니다.",
+ "require": "필요",
+ "requireBiometrics": "앱에 액세스하려면 생체 인식 필요",
+ "sAMAccountName": "SamAccountName",
+ "scopeTagsRequired": "한 개 이상의 범위 태그가 필요합니다.",
+ "searchAppLabel": "앱 선택",
+ "searchAppLinkText": "App Store 검색",
+ "searchWinGetPublicRepositoryLinkText": "Windows 패키지 관리자 커뮤니티 리포지토리 검색",
+ "searchWinGetStoreRepositoryLinkText": "Microsoft Store 앱(신규) 검색",
+ "selectAAD": "Microsoft Entra 속성을 선택하세요.",
+ "selectAppFileLabel": "파일 선택",
+ "selectAppFileLinkText": "앱 패키지 파일 선택",
+ "selectAppFileToUpdateLabel": "업데이트할 파일 선택",
+ "selectAuthMethod": "인증 방법 선택",
+ "selectAuthType": "인증 형식 선택",
+ "selectCatalogAppLabel": "앱 선택",
+ "selectCatalogAppLinkText": "Enterprise App Catalog 검색",
+ "selectCertificate": "인증서 선택",
+ "signAllEmails": "모든 메일 서명",
+ "signingCertificates": "서명 인증서",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "제품군 설명",
+ "suiteNameLabel": "제품군 이름",
+ "targetApplicationBundleIdentifier": "대상 애플리케이션 번들 식별자",
+ "targetedPlatformsLabel": "대상 플랫폼",
+ "tasks": "작업",
+ "threeDays": "3일",
+ "totalLicenseCount": "총 라이선스 수",
+ "twoWeeks": "2주",
+ "unifiedAssignmentsLabel": "할당 대상:",
+ "unlimited": "무제한",
+ "urlHint": "유효한 URL을 입력하세요.",
+ "useManagedBrowserHint": "Android 및 iOS에만 해당. 자세히 알아보기",
+ "useManagedBrowserLabel": "이 링크를 열려면 Managed Browser가 필요",
+ "userPrinicipalName": "사용자 계정 이름",
+ "username": "사용자 이름",
+ "usernameAttribute": "Microsoft Entra ID의 사용자 이름 속성",
+ "usernameAttributreInfoBalloon": "계정을 인증하는 데 사용할 메일 프로필의 사용자 계정 이름을 지정합니다.",
+ "usernamePassword": "사용자 이름 및 암호",
+ "webAppUrlHint": "http:// 또는 https://로 시작하는 유효한 URL을 입력하세요.",
+ "webAppUrlLabel": "앱 URL",
+ "webAppUrlSizeHint": "앱 URL의 최대 길이는 1024자입니다.",
+ "windowsUrlValidation": "유효한 URL을 입력하세요(예: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm).",
+ "xMLDataEntered": "입력한 XML 데이터",
+ "xmlFormatInvalid": "XML 정책 형식이 잘못되었습니다.",
+ "xmlTooLarge": "입력 크기는 1MB 미만이어야 합니다."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "다른 공동 관리 기관 페이지가 할당되지 않은 경우 영향을 받는 사용자는 할당된 다음으로 가장 높은 우선 순위의 공동 관리 기관 페이지 또는 기본 공동 관리 기관 페이지로 제한됩니다.",
@@ -1372,52 +641,1473 @@
"pageTitle": "공동 관리 기관",
"settingDescription": "공동 관리 설정에 따라 워크로드를 소유한 사람이 결정됩니다."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise 시스템 앱",
- "androidForWorkApp": "관리형 Google Play 스토어 앱",
- "androidLobApp": "Android LOB(기간 업무) 앱",
- "androidStoreApp": "Android 스토어 앱",
- "builtInAndroid": "기본 제공 Android 앱",
- "builtInApp": "기본 제공 앱",
- "builtInIos": "기본 제공 iOS 앱",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS 웹 클립",
- "iosLobApp": "iOS LOB(기간 업무) 앱",
- "iosStoreApp": "iOS 스토어 앱",
- "iosVppApp": "iOS 대량 구매 프로그램 앱",
- "lineOfBusinessApp": "LOB(기간 업무) 앱",
- "macOSDmgApp": "macOS 앱(DMG)",
- "macOSEdgeApp": "Microsoft Edge(macOS)",
- "macOSLobApp": "macOS 기간 업무 앱",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP(macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365 앱(macOS)",
- "macOSPkgApp": "macOS 앱(PKG)",
- "macOSWebClip": "macOS 웹 클립",
- "macOsVppApp": "macOS Volume Purchase Program 앱",
- "managedAndroidLobApp": "관리되는 Android LOB(기간 업무) 앱",
- "managedAndroidStoreApp": "관리되는 Android 스토어 앱",
- "managedGooglePlayApp": "관리형 Google Play 스토어 앱",
- "managedGooglePlayPrivateApp": "관리형 Google Play 프라이빗 앱",
- "managedGooglePlayWebApp": "관리형 Google Play 웹 링크",
- "managedIosLobApp": "관리되는 iOS LOB(기간 업무) 앱",
- "managedIosStoreApp": "관리되는 iOS 스토어 앱",
- "microsoftStoreForBusinessApp": "비즈니스용 Microsoft 스토어 앱",
- "microsoftStoreForBusinessReleaseManagedApp": "비즈니스용 Microsoft 스토어",
- "officeSuiteApp": "Microsoft 365 앱(Windows 10 이상)",
- "webApp": "웹 링크",
- "windowsAppXLobApp": "Windows AppX LOB(기간 업무) 앱",
- "windowsClassicApp": "Windows 앱(Win32)",
- "windowsEdgeApp": "Microsoft Edge(Windows 10 이상)",
- "windowsMobileMsiLobApp": "Windows MSI 기간 업무 앱",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX LOB(기간 업무) 앱",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX LOB(기간 업무) 앱",
- "windowsPhone81StoreApp": "Windows Phone 8.1 스토어 앱",
- "windowsPhoneXapLobApp": "Windows Phone XAP LOB(기간 업무) 앱",
- "windowsStoreApp": "Microsoft Store 앱(레거시)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX LOB(기간 업무) 앱",
- "windowsUniversalLobApp": "Windows 유니버설 사업 부문 앱",
- "windowsWebApp": "Windows 웹 링크"
- },
+ "AzureIAMCommon": {
+ "Recommended": "권장",
+ "CountryNames": {
+ "countryNameNR": "나우루",
+ "countryNameBH": "바레인",
+ "countryNameZA": "남아프리카 공화국",
+ "countryNameJO": "요르단",
+ "countryNameSD": "수단",
+ "countryNameNU": "니우에",
+ "countryNameCZ": "체코 공화국",
+ "countryNameLT": "리투아니아",
+ "countryNameTK": "토켈라우",
+ "countryNameEC": "에콰도르",
+ "countryNameVU": "바누아투",
+ "countryNameUG": "우간다",
+ "countryNameLI": "리히텐슈타인",
+ "countryNameHK": "홍콩 특별 행정구",
+ "countryNameGH": "가나",
+ "countryNameSA": "사우디아라비아",
+ "countryNamePG": "파푸아뉴기니",
+ "countryNameBW": "보츠와나",
+ "countryNameDG": "디에고 가르시아 섬",
+ "countryNameIN": "인도",
+ "countryNameHN": "온두라스",
+ "countryNameRO": "루마니아",
+ "countryNameKZ": "카자흐스탄",
+ "countryNameLC": "세인트 루시아",
+ "countryNameGE": "조지아",
+ "countryNameTT": "트리니다드 토바고",
+ "countryNameMP": "북마리아나 제도",
+ "countryNameMV": "몰디브",
+ "countryNameFI": "핀란드",
+ "countryNameNO": "노르웨이",
+ "countryNameEE": "에스토니아",
+ "countryNameVE": "베네수엘라",
+ "countryNameUZ": "우즈베키스탄",
+ "countryNameME": "몬테네그로",
+ "countryNameTJ": "타지키스탄",
+ "countryNameAW": "아루바",
+ "countryNameFR": "프랑스",
+ "countryNameOM": "오만",
+ "countryNameAO": "앙골라",
+ "countryNameIT": "이탈리아",
+ "countryNameAZ": "아제르바이잔",
+ "countryNameKG": "키르기스스탄",
+ "countryNameWF": "월리스 푸투나",
+ "countryNameTL": "동티모르(Timor-Leste)",
+ "countryNameFK": "포클랜드 제도(Islas Malvinas)",
+ "countryNameGY": "가이아나",
+ "countryNameSS": "남수단",
+ "countryNameMM": "미얀마",
+ "countryNameHT": "아이티",
+ "countryNameSY": "시리아",
+ "countryNameMD": "몰도바",
+ "countryNameVC": "세인트 빈센트 그레나딘",
+ "countryNameID": "인도네시아",
+ "countryNameRE": "리유니언",
+ "countryNameER": "에리트리아",
+ "countryNameMK": "북마케도니아",
+ "countryNameTG": "토고",
+ "countryNamePF": "프랑스령 폴리네시아",
+ "countryNameKY": "케이맨 제도",
+ "countryNameIO": "영국령 인도양 식민지",
+ "countryNameRU": "러시아",
+ "countryNameMA": "모로코",
+ "countryNameAU": "오스트레일리아",
+ "countryNameBO": "볼리비아",
+ "countryNameVA": "교황청(바티칸 시국)",
+ "countryNameVG": "영국령 버진 아일랜드",
+ "countryNameFM": "미크로네시아",
+ "countryNameAQ": "남극 대륙",
+ "countryNameZM": "잠비아",
+ "countryNameBR": "브라질",
+ "countryNameIS": "아이슬란드",
+ "countryNamePE": "페루",
+ "countryNameBG": "불가리아",
+ "countryNamePR": "푸에르토리코",
+ "countryNameGI": "지브롤터",
+ "countryNameBS": "바하마",
+ "countryNameJE": "저지",
+ "countryNameMO": "마카오 특별행정구",
+ "countryNameRW": "르완다",
+ "countryNameAS": "미국령 사모아",
+ "countryNameBQ": "보네르, 신트외스타티우스 및 사바",
+ "countryNameMF": "세인트마틴",
+ "countryNameTM": "투르크메니스탄",
+ "countryNameML": "말리",
+ "countryNameTO": "통가",
+ "countryNameNC": "뉴칼레도니아",
+ "countryNameAC": "어센션 섬",
+ "countryNameBN": "브루나이",
+ "countryNameBD": "방글라데시",
+ "countryNameMW": "말라위",
+ "countryNameGM": "감비아",
+ "countryNameGA": "가봉",
+ "countryNameCA": "캐나다",
+ "countryNameSH": "세인트 헬레나",
+ "countryNameYT": "마요트",
+ "countryNameMN": "몽골",
+ "countryNamePA": "파나마",
+ "countryNameCM": "카메룬",
+ "countryNameNE": "니제르",
+ "countryNameCW": "퀴라소",
+ "countryNameJP": "일본",
+ "countryNameCY": "키프로스",
+ "countryNameCD": "콩고 민주 공화국",
+ "countryNameTN": "튀니지",
+ "countryNameTR": "튀르키예",
+ "countryNameWS": "사모아",
+ "countryNameSE": "스웨덴",
+ "countryNameXK": "코소보",
+ "countryNameKH": "캄보디아",
+ "countryNamePL": "폴란드",
+ "countryNameDZ": "알제리",
+ "countryNameLR": "라이베리아",
+ "countryNameSO": "소말리아",
+ "countryNameDM": "도미니카",
+ "countryNameEG": "이집트",
+ "countryNameGF": "프랑스령 기아나",
+ "countryNameNZ": "뉴질랜드",
+ "countryNamePS": "팔레스타인 자치 정부",
+ "countryNameIL": "이스라엘",
+ "countryNameSL": "시에라리온",
+ "countryNameGR": "그리스",
+ "countryNameNG": "나이지리아",
+ "countryNameMR": "모리타니",
+ "countryNameVI": "미국령 버진 아일랜드",
+ "countryNameGQ": "적도 기니",
+ "countryNameMX": "멕시코",
+ "countryNameDJ": "지부티",
+ "countryNameGN": "기니",
+ "countryNameCN": "중국",
+ "countryNameMZ": "모잠비크",
+ "countryNameBV": "부베 섬",
+ "countryNameNF": "노퍽 섬",
+ "countryNameTZ": "탄자니아",
+ "countryNameAI": "앵귈라",
+ "countryNameGS": "사우스 조지아 및 사우스 샌드위치 제도",
+ "countryNameRS": "세르비아",
+ "countryNameCC": "코코스 제도",
+ "countryNameNA": "나미비아",
+ "countryNameDE": "독일",
+ "countryNameCG": "콩고 공화국",
+ "countryNameKW": "쿠웨이트",
+ "countryNameMH": "마셜 제도",
+ "countryNameVN": "베트남",
+ "countryNameBY": "벨라루스",
+ "countryNameMY": "말레이시아",
+ "countryNameST": "상투메 프린시페",
+ "countryNameLS": "레소토",
+ "countryNameBI": "부룬디",
+ "countryNameTD": "차드",
+ "countryNameCX": "크리스마스 섬",
+ "countryNameIR": "이란",
+ "countryNameTV": "투발루",
+ "countryNameGW": "기니비사우",
+ "countryNameUA": "우크라이나",
+ "countryNameCU": "쿠바",
+ "countryNameCO": "콜롬비아",
+ "countryNameNI": "니카라과",
+ "countryNameHR": "크로아티아",
+ "countryNameSC": "세이셸",
+ "countryNameNL": "네덜란드",
+ "countryNameUM": "미국령 군소 제도",
+ "countryNameIM": "맨 섬",
+ "countryNameFJ": "피지",
+ "countryNameSR": "수리남",
+ "countryNameGT": "과테말라",
+ "countryNameSM": "산마리노",
+ "countryNameLA": "라오스",
+ "countryNameGB": "영국",
+ "countryNameBB": "바베이도스",
+ "countryNameSI": "슬로베니아",
+ "countryNameAM": "아르메니아",
+ "countryNameAR": "아르헨티나",
+ "countryNamePM": "생피에르앤드미클롱",
+ "countryNameTF": "프랑스령 남부와 남극지역",
+ "countryNameDO": "도미니카 공화국",
+ "countryNameZW": "짐바브웨",
+ "countryNameMQ": "마르티니크",
+ "countryNamePT": "포르투갈",
+ "countryNameCF": "중앙 아프리카 공화국",
+ "countryNameBE": "벨기에",
+ "countryNameKM": "코모로",
+ "countryNameLY": "리비아",
+ "countryNameIE": "아일랜드",
+ "countryNameKP": "북한",
+ "countryNameGG": "건지",
+ "countryNameSK": "슬로바키아",
+ "countryNameTC": "터크스 케이커스 제도",
+ "countryNameNP": "네팔",
+ "countryNameBF": "부르키나 파소",
+ "countryNameYE": "예멘",
+ "countryNameBA": "보스니아 헤르체고비나",
+ "countryNameGP": "과들루프",
+ "countryNameMS": "몬트세라트",
+ "countryNameCL": "칠레",
+ "countryNameIQ": "이라크",
+ "countryNameSJ": "스발바르제도-얀마웬섬",
+ "countryNameAX": "포클랜드 제도",
+ "countryNameKE": "케냐",
+ "countryNameGU": "괌",
+ "countryNameBM": "버뮤다",
+ "countryNameFO": "페로 제도",
+ "countryNameBL": "생바르텔레미 섬",
+ "countryNameLB": "레바논",
+ "countryNameJM": "자메이카",
+ "countryNameAF": "아프가니스탄",
+ "countryNameES": "스페인",
+ "countryNameMC": "모나코",
+ "countryNameSG": "싱가포르",
+ "countryNameAL": "알바니아",
+ "countryNameSN": "세네갈",
+ "countryNameSZ": "에스와티니",
+ "countryNameBZ": "벨리즈",
+ "countryNameCI": "코트디부아르",
+ "countryNameTW": "대만",
+ "countryNameUY": "우루과이",
+ "countryNameCK": "쿡 제도",
+ "countryNameTH": "태국",
+ "countryNameHM": "허드 섬 및 맥도널드 제도",
+ "countryNameGD": "그레나다",
+ "countryNameUS": "미국",
+ "countryNameAT": "오스트리아",
+ "countryNameKR": "한국",
+ "countryNamePK": "파키스탄",
+ "countryNameDK": "덴마크",
+ "countryNameSV": "엘살바도르",
+ "countryNamePW": "팔라우",
+ "countryNameET": "에티오피아",
+ "countryNameMG": "마다가스카르",
+ "countryNameCR": "코스타리카",
+ "countryNameLU": "룩셈부르크",
+ "countryNameQA": "카타르",
+ "countryNameBT": "부탄",
+ "countryNameSB": "솔로몬 제도",
+ "countryNameAE": "아랍에미리트",
+ "countryNameAD": "안도라",
+ "countryNameCV": "카보베르데",
+ "countryNameAG": "앤티가 바부다",
+ "countryNameMU": "모리셔스",
+ "countryNameHU": "헝가리",
+ "countryNameSX": "상마르탱 섬",
+ "countryNameCH": "스위스",
+ "countryNamePN": "핏케언 제도",
+ "countryNameGL": "그린란드",
+ "countryNamePH": "필리핀",
+ "countryNameMT": "몰타",
+ "countryNameKN": "세인트 크리스토퍼 네비스",
+ "countryNameLK": "스리랑카",
+ "countryNameKI": "키리바시",
+ "countryNameBJ": "베냉",
+ "countryNameLV": "라트비아",
+ "countryNamePY": "파라과이"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "작성자",
+ "template": "템플릿 이름"
+ },
+ "Row": {
+ "ariaLabel": "{1} 열 {2}의 {0} 행"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "처음부터 시작하고 사용 가능한 인벤토리 속성 라이브러리에서 원하는 속성을 선택하세요."
+ },
+ "SettingsCatalog": {
+ "subtitle": "처음부터 시작하여 사용 가능한 설정 라이브러리에서 원하는 설정 선택",
+ "title": "설정 카탈로그"
+ },
+ "Templates": {
+ "subtitle": "템플릿에는 기능별로 구성된 설정 그룹이 포함되어 있습니다. 정책을 수동으로 빌드하지 않으려는 경우 또는 디바이스가 회사 네트워크에 액세스하도록 구성하려는 경우(예: WiFi 또는 VPN 구성) 템플릿을 사용합니다.",
+ "title": "템플릿"
+ },
+ "noData": "정책 템플릿을 찾을 수 없음"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge 앱 권장 SmartScreen 설정: 클라우드 구성 템플릿의 Windows 10. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "엔드포인트 검색 및 응답"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "앱 및 브라우저 격리",
+ "aSRApplicationControl": "애플리케이션 제어",
+ "aSRAttackSurfaceReduction": "공격 표면 감소 규칙",
+ "aSRDeviceControl": "디바이스 제어",
+ "aSRExploitProtection": "Exploit Protection",
+ "aSRWebProtection": "웹 보호(Microsoft Edge 레거시)",
+ "aVExclusions": "Microsoft Defender 바이러스 백신 제외",
+ "antivirus": "Microsoft Defender 바이러스 백신",
+ "cloudPC": "Windows 365 보안 기준",
+ "default": "엔드포인트 보안",
+ "defenderTest": "엔드포인트용 Microsoft Defender 데모",
+ "diskEncryption": "BitLocker",
+ "eDR": "엔드포인트 검색 및 응답",
+ "edgeSecurityBaseline": "Microsoft Edge 기준",
+ "edgeSecurityBaselinePreview": "미리 보기: Microsoft Edge 기준선",
+ "editionUpgradeConfiguration": "버전 업그레이드 및 모드 전환",
+ "firewall": "Windows 방화벽",
+ "firewallRules": "Windows 방화벽 규칙",
+ "identityProtection": "계정 보호",
+ "identityProtectionPreview": "계정 보호(미리 보기)",
+ "mDMSecurityBaseline1810": "2018년 10월 Windows 10 이상용 MDM 보안 기준",
+ "mDMSecurityBaseline1810Preview": "미리 보기: 2018년 10월 Windows 10 이상용 MDM 보안 기준",
+ "mDMSecurityBaseline1810PreviewBeta": "미리 보기: 2018년 10월 Windows 10용 MDM 보안 기준(베타)",
+ "mDMSecurityBaseline1906": "2019년 5월 Windows 10 이상용 MDM 보안 기준",
+ "mDMSecurityBaseline2004": "2020년 8월 Windows 10 이상용 MDM 보안 기준",
+ "mDMSecurityBaseline2101": "2020년 12월 이후 Windows 10 MDM 보안 기준",
+ "macOSAntivirus": "바이러스 백신",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS 방화벽",
+ "microsoftDefenderBaseline": "엔드포인트용 Microsoft Defender 기준",
+ "office365Baseline": "Microsoft Office O365 기준",
+ "office365BaselinePreview": "미리 보기: Microsoft Office O365 기준",
+ "securityBaselines": "보안 기준",
+ "test": "테스트 템플릿",
+ "testFirewallRulesSecurityTemplateName": "Windows 방화벽 규칙(테스트)",
+ "testIdentityProtectionSecurityTemplateName": "계정 보호(테스트)",
+ "windowsSecurityExperience": "Windows 보안 환경"
+ },
+ "Firewall": {
+ "mDE": "Windows 방화벽"
+ },
+ "FirewallRules": {
+ "mDE": "Windows 방화벽 규칙"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "OneDrive 알려진 폴더 이동 설정: 클라우드 구성 템플릿의 Windows 10. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "계정 보호",
+ "administrativeTemplates": "관리 템플릿",
+ "androidCompliancePolicy": "Android 준수 정책",
+ "aospDeviceOwnerCompliancePolicy": "Android(AOSP) 규정 준수 정책",
+ "applicationControl": "비즈니스용 앱 제어",
+ "attackSurfaceReductionRules": "공격 노출 영역 축소 규칙",
+ "bitlocker": "BitLocker",
+ "custom": "사용자 지정",
+ "deliveryOptimization": "제공 최적화",
+ "derivedPersonalIdentityVerificationCredential": "파생된 자격 증명",
+ "deviceControl": "디바이스 제어",
+ "deviceFeatures": "디바이스 기능",
+ "deviceFirmwareConfigurationInterface": "디바이스 펌웨어 구성 인터페이스",
+ "deviceLock": "디바이스 잠금",
+ "deviceOwner": "완전 관리형, 전용 및 회사 소유 회사 프로필",
+ "deviceRestrictions": "디바이스 제한",
+ "deviceRestrictionsWindows10Team": "디바이스 제한(Windows 10 Team)",
+ "domainJoinPreview": "도메인 가입",
+ "editionUpgradeAndModeSwitch": "버전 업그레이드 및 모드 전환",
+ "education": "교육",
+ "email": "전자 메일",
+ "emailSamsungKnoxOnly": "메일(삼성 KNOX 전용)",
+ "endpointProtection": "엔드포인트 보호",
+ "expeditedCheckin": "모바일 디바이스 관리 구성",
+ "exploitProtection": "Exploit Protection",
+ "extensions": "확장",
+ "hardwareConfigurations": "BIOS 구성 및 기타 설정",
+ "identityProtection": "ID 보호",
+ "iosCompliancePolicy": "iOS 준수 정책",
+ "kiosk": "키오스크",
+ "localUsersAndGroups": "사용자 그룹 구성원 편집",
+ "macCompliancePolicy": "Mac 준수 정책",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "엔터프라이즈용 Microsoft 365 앱 보안 기준",
+ "microsoftDefenderAntivirus": "Microsoft Defender 바이러스 백신",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender 바이러스 백신 제외",
+ "microsoftDefenderAtpWindows10Desktop": "엔드포인트용 Microsoft Defender(Windows 10 이상을 실행하는 데스크톱 디바이스)",
+ "microsoftDefenderFirewallRules": "Windows 방화벽 규칙",
+ "microsoftDefenderforEndpointSecurityBaseline": "엔드포인트용 Microsoft Defender 보안 기준",
+ "microsoftEdgeBaseline": "Microsoft Edge 보안 기준",
+ "mxProfileZebraOnly": "MX 프로필(Zebra만)",
+ "networkBoundary": "네트워크 경계",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "그룹 정책 재정의",
+ "pkcsCertificate": "PKCS 인증서",
+ "pkcsImportedCertificate": "PKCS 가져온 인증서",
+ "preferenceFile": "기본 설정 파일",
+ "presets": "미리 설정",
+ "scepCertificate": "SCEP 인증서",
+ "secureAssessmentEducation": "보안 평가(교육)",
+ "securityBaselineForHololens2Advanced": "HoloLens 2의 고급 보안 기준",
+ "securityBaselineForHololens2Standard": "HoloLens 2 표준 보안 기준",
+ "securityBaselineForMicrosoftEdge": "Microsoft Edge 보안 기준",
+ "settingsCatalog": "설정 카탈로그",
+ "sharedMultiUserDevice": "공유 다중 사용자 디바이스",
+ "softwareUpdates": "소프트웨어 업데이트",
+ "trustedCertificate": "신뢰할 수 있는 인증서",
+ "unknown": "알 수 없음",
+ "unsupported": "지원되지 않음",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi 가져오기",
+ "windows10CompliancePolicy": "Windows 10/11 준수 정책",
+ "windows10MobileCompliancePolicy": "Windows 10 Mobile 준수 정책",
+ "windows10XScep": "SCEP 인증서 - 테스트",
+ "windows10XTrustedCertificate": "신뢰할 수 있는 인증서 - 테스트",
+ "windows10XVPN": "VPN - 테스트",
+ "windows10XWifi": "WIFI - 테스트",
+ "windows11SecurityBaseline": "Windows 10 이상용 보안 기준",
+ "windows365SecurityBaseline": "Windows 365 보안 기준",
+ "windows8CompliancePolicy": "Windows 8 준수 정책",
+ "windowsHealthMonitoring": "Windows 상태 모니터링",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Windows Phone 준수 정책",
+ "windowsUpdateforBusiness": "비즈니스용 Windows 업데이트",
+ "wiredNetwork": "유선 네트워크",
+ "workProfile": "개인 소유 회사 프로필"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "업데이트를 점진적으로 사용할 수 있도록 설정",
+ "immediateStart": "가능한 한 빨리 업데이트를 사용할 수 있도록 설정",
+ "startDateOnly": "특정 날짜에 업데이트를 사용할 수 있도록 설정"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "자동 거부",
+ "autoGrant": "자동 허용",
+ "prompt": "확인"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "위치 액세스(거칠게)",
+ "accessFineLocation": "위치 액세스(세밀하게)",
+ "addVoicemail": "음성 사서함 추가",
+ "bodySensors": "신체 센서 데이터 허용",
+ "bodySensorsBackground": "배경 본문 센서 데이터 허용",
+ "callPhone": "전화 걸기",
+ "camera": "카메라",
+ "getAccounts": "계정 가져오기",
+ "nearbyDevices": "주변 장치",
+ "nearbyWifiDevices": "주변 WiFi 장치",
+ "postNotifications": "알림 게시",
+ "processOutgoingCalls": "발신 통화 처리",
+ "readCalendar": "일정(읽기)",
+ "readCallLog": "통화 기록(읽기)",
+ "readContacts": "연락처(읽기)",
+ "readExternalStorage": "외부 스토리지(읽기)",
+ "readMediaAudio": "미디어 오디오(읽기)",
+ "readMediaImages": "미디어 이미지(읽기)",
+ "readMediaVideo": "미디어 비디오(읽기)",
+ "readPhoneState": "전화 상태(읽기)",
+ "readSMS": "SMS(읽기)",
+ "receiveMMS": "MMS(수신)",
+ "receiveSMS": "SMS(수신)",
+ "receiveWAPPush": "WAP 푸시 메시지(수신)",
+ "recordAudio": "오디오 녹음",
+ "sendSMS": "SMS(보내기)",
+ "useSIP": "SIP 서비스 사용",
+ "writeCalendar": "일정(쓰기)",
+ "writeCallLog": "통화 기록(쓰기)",
+ "writeContacts": "연락처(쓰기)",
+ "writeExternalStorage": "외부 스토리지(쓰기)"
+ },
+ "RemoveDialog": {
+ "description": "권한을 제거할까요?",
+ "title": "제거"
+ },
+ "TableHeader": {
+ "permission": "권한",
+ "permissionGroup": "권한 그룹",
+ "permissionName": "권한 이름",
+ "permissionState": "권한 상태"
+ },
+ "addButtonLabel": "+추가",
+ "addPermissionTableDescription": "재정의하려는 권한을 지정합니다. 이러한 권한을 명시적으로 선택/지정하지 않으면 기본 동작이 적용됩니다.",
+ "addPermissionsTitle": "권한 추가",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Android 런타임 권한에 대해 자세히 알아보기",
+ "permissionTableDescription": "여기에서 부여된 권한은 선택한 앱에 대한 \"기본 앱 권한\" 정책을 재정의합니다.",
+ "permissionsTitle": "권한"
+ },
+ "AssignmentAction": {
+ "exclude": "제외",
+ "include": "포함됨",
+ "includeAllDevicesVirtualGroup": "포함됨",
+ "includeAllUsersVirtualGroup": "포함됨"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search를 기본값으로 사용",
+ "excel": "Excel",
+ "groove": "OneDrive(Groove)",
+ "lync": "비즈니스용 Skype",
+ "oneDrive": "OneDrive 데스크톱",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "선택한 요구 사항으로써 파일 또는 폴더입니다.",
+ "pathToolTip": "검색할 파일 또는 폴더의 전체 경로입니다.",
+ "property": "속성",
+ "valueToolTip": "선택한 검색 방법과 일치하는 요구 사항 값을 선택합니다. 날짜 및 시간 요구 사항은 현지 형식으로 입력해야 합니다."
+ },
+ "GridColumns": {
+ "pathOrScript": "경로/스크립트",
+ "type": "형식"
+ },
+ "Registry": {
+ "keyPath": "키 경로",
+ "keyPathTooltip": "요구 사항으로써 값을 포함하는 레지스트리 항목의 전체 경로입니다.",
+ "operator": "연산자",
+ "operatorTooltip": "비교 연산자를 선택합니다.",
+ "registryRequirement": "레지스트리 키 요구 사항",
+ "registryRequirementTooltip": "레지스트리 키 요구 사항 비교를 선택합니다.",
+ "valueName": "값 이름",
+ "valueNameTooltip": "필요한 레지스트리 값의 이름입니다."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "파일",
+ "registry": "레지스트리",
+ "script": "스크립트"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "부울",
+ "dateTime": "날짜 및 시간",
+ "float": "부동 소수점",
+ "integer": "정수",
+ "string": "문자열",
+ "version": "버전"
+ },
+ "duplicateName": "스크립트 이름 {0}이(가)이미 사용 중입니다. 다른 이름을 입력하세요.",
+ "enforceSignatureCheck": "스크립트 서명 확인 적용",
+ "enforceSignatureCheckTooltip": "스크립트가 신뢰할 수 있는 게시자에 의해 서명되었는지 확인하려면 '예'를 선택합니다(경고나 메시지가 표시되지 않고 스크립트가 실행되도록 함). 스크립트가 차단 해제된 상태로 실행됩니다. 서명 확인 없이 최종 사용자 확인으로 스크립트를 실행하려면 '아니요'(기본값)를 선택합니다.",
+ "loggedOnCredentials": "로그온된 자격 증명을 사용하여 이 스크립트 실행",
+ "loggedOnCredentialsTooltip": "로그인한 디바이스 자격 증명을 사용하여 스크립트 실행",
+ "operatorTooltip": "요구 사항 비교 연산자를 선택합니다.",
+ "requirementMethod": "출력 데이터 형식 선택",
+ "requirementMethodTooltip": "검색 일치 요구 사항을 확인할 때 사용하는 데이터 형식을 선택합니다.",
+ "scriptContent": "스크립트 콘텐츠",
+ "scriptFile": "스크립트 파일",
+ "scriptFileTooltip": "클라이언트에서 앱의 존재를 검색하는 PowerShell 스크립트를 선택합니다. 앱이 검색되면 요구 사항 프로세스에서 0 값 종료 코드를 제공하고 STDOUT에 문자열 값을 씁니다.",
+ "scriptName": "스크립트 이름",
+ "value": "값",
+ "valueTooltip": "선택한 검색 방법과 일치하는 요구 사항 값을 선택합니다. 날짜 및 시간 요구 사항은 현지 형식으로 입력해야 합니다."
+ },
+ "bladeTitle": "요구 사항 규칙 추가",
+ "createRequirementHeader": "요구 사항을 만듭니다.",
+ "header": "추가 요구 사항 규칙 구성",
+ "label": "추가 요구 사항 규칙",
+ "noRequirementsSelectedPlaceholder": "요구 사항이 지정되지 않았습니다.",
+ "requirementType": "요구 사항 유형",
+ "requirementTypeTooltip": "요구 사항을 확인하는 방법을 결정하는 데 사용되는 검색 방법 유형을 선택합니다."
+ },
+ "architectures": "운영 체제 아키텍처",
+ "architecturesTooltip": "앱을 설치하는 데 필요한 아키텍처를 선택합니다.",
+ "bladeTitle": "요구 사항",
+ "diskSpace": "필요한 디스크 공간(MB)",
+ "diskSpaceTooltip": "앱을 설치하는 데 필요한 시스템 드라이브의 사용 가능한 디스크 공간입니다.",
+ "header": "앱을 설치하기 전에 디바이스가 충족해야 하는 요구 사항 지정:",
+ "maximumTextFieldValue": "값은 {0} 이하여야 합니다.",
+ "minimumCpuSpeed": "필요한 최소 CPU 속도(MHz)",
+ "minimumCpuSpeedTooltip": "앱을 설치하는 데 필요한 최소 CPU 속도입니다.",
+ "minimumLogicalProcessors": "필요한 최소 논리 프로세서 수",
+ "minimumLogicalProcessorsTooltip": "앱을 설치하는 데 필요한 최소 논리 프로세서 수입니다.",
+ "minimumOperatingSystem": "최소 운영 체제",
+ "minimumOperatingSystemTooltip": "앱을 설치하는 데 필요한 최소 운영 체제를 선택합니다.",
+ "minumumTextFieldValue": "값은 {0} 이상이어야 합니다.",
+ "physicalMemory": "필요한 실제 메모리(MB)",
+ "physicalMemoryTooltip": "앱을 설치하는 데 필요한 실제 메모리(RAM)입니다.",
+ "selectorLabel": "요구 사항",
+ "validNumber": "유효한 숫자를 입력하세요."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "필터",
+ "assignmentFilterTypeColumnHeader": "필터 모드",
+ "assignmentToast": "최종 사용자 알림",
+ "assignmentTypeTableHeader": "할당 유형",
+ "autoUpdate": "자동 업데이트",
+ "deadlineTimeColumnLabel": "설치 최종 기한",
+ "deliveryOptimizationPriorityHeader": "배달 최적화 우선 순위",
+ "groupTableHeader": "그룹",
+ "installContextLabel": "설치 컨텍스트",
+ "isRemovable": "이동식으로 설치",
+ "licenseTypeLabel": "라이선스 유형",
+ "modeTableHeader": "그룹 모드",
+ "policySet": "정책 집합",
+ "preventAutoAppUpdate": "자동 앱 업데이트 방지",
+ "preventManagedAppBackup": "iCloud 앱 백업 방지",
+ "restartGracePeriodHeader": "다시 시작 유예 기간",
+ "startTimeColumnLabel": "가용성",
+ "tracks": "트랙",
+ "uninstallOnRemoval": "디바이스 제거 시 제거",
+ "updateMode": "업데이트 우선 순위",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD 웹앱",
+ "androidEnterpriseSystemApp": "Android Enterprise 시스템 앱",
+ "androidForWorkApp": "관리형 Google Play 스토어 앱",
+ "androidLobApp": "Android LOB(기간 업무) 앱",
+ "androidStoreApp": "Android 스토어 앱",
+ "builtInAndroid": "기본 제공 Android 앱",
+ "builtInApp": "기본 제공 앱",
+ "builtInIos": "기본 제공 iOS 앱",
+ "iosIPadOSWebClip": "iOS/iPadOS 웹 클립",
+ "iosLobApp": "iOS LOB(기간 업무) 앱",
+ "iosStoreApp": "iOS 스토어 앱",
+ "iosVppApp": "iOS 대량 구매 프로그램 앱",
+ "lineOfBusinessApp": "LOB(기간 업무) 앱",
+ "macOSDmgApp": "macOS 앱(DMG)",
+ "macOSEdgeApp": "Microsoft Edge(macOS)",
+ "macOSLobApp": "macOS 기간 업무 앱",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP(macOS)",
+ "macOSOfficeSuiteApp": "macOS Office 제품군",
+ "macOSPkgApp": "macOS 앱(PKG)",
+ "macOSWebClip": "macOS 웹 클립",
+ "macOsVppApp": "macOS Volume Purchase Program 앱",
+ "managedAndroidLobApp": "관리되는 Android LOB(기간 업무) 앱",
+ "managedAndroidStoreApp": "관리되는 Android 스토어 앱",
+ "managedGooglePlayApp": "관리형 Google Play 스토어 앱",
+ "managedGooglePlayPrivateApp": "관리형 Google Play 프라이빗 앱",
+ "managedGooglePlayWebApp": "관리형 Google Play 웹 링크",
+ "managedIosLobApp": "관리되는 iOS LOB(기간 업무) 앱",
+ "managedIosStoreApp": "관리되는 iOS 스토어 앱",
+ "microsoftStoreForBusinessApp": "비즈니스용 Microsoft 스토어 앱",
+ "microsoftStoreForBusinessReleaseManagedApp": "비즈니스용 Microsoft 스토어",
+ "officeAddIn": "Office 추가 기능",
+ "officeSuiteApp": "Microsoft 365 앱(Windows 10 이상)",
+ "sharePointApp": "SharePoint 앱",
+ "teamsApp": "Teams 앱",
+ "webApp": "웹 링크",
+ "win32CatalogApp": "Windows 카탈로그 앱(Win32)",
+ "winGetPublicApp": "Windows 패키지 관리자 커뮤니티 리포지토리",
+ "winGetStoreApp": "Microsoft Store 앱(신규)",
+ "windowsAppXLobApp": "Windows AppX LOB(기간 업무) 앱",
+ "windowsClassicApp": "Windows 앱(Win32)",
+ "windowsEdgeApp": "Microsoft Edge(Windows 10 이상)",
+ "windowsMobileMsiLobApp": "Windows MSI 기간 업무 앱",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX LOB(기간 업무) 앱",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX LOB(기간 업무) 앱",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 스토어 앱",
+ "windowsPhoneXapLobApp": "Windows Phone XAP LOB(기간 업무) 앱",
+ "windowsStoreApp": "Microsoft Store 앱(레거시)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX LOB(기간 업무) 앱",
+ "windowsUniversalLobApp": "Windows 유니버설 사업 부문 앱",
+ "windowsWebApp": "Windows 웹 링크"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "제외됨",
+ "include": "포함됨",
+ "includeAllDevicesVirtualGroup": "포함됨",
+ "includeAllUsersVirtualGroup": "포함됨"
+ },
+ "AssignmentToast": {
+ "hideAll": "모든 알림 메시지 숨기기",
+ "showAll": "모든 알림 메시지 표시",
+ "showReboot": "컴퓨터 다시 시작에 대한 알림 메시지 표시"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "예",
+ "notConfigured": "아니요"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "백그라운드",
+ "displayText": "{0}에서 콘텐츠 다운로드",
+ "foreground": "포그라운드",
+ "header": "배달 최적화 우선 순위"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "앱을 설치하면 디바이스가 강제로 다시 시작될 수 있음",
+ "basedOnReturnCode": "반환 코드에 따라 동작 결정",
+ "force": "Intune에서 강제로 필수 디바이스를 다시 시작함",
+ "suppress": "구체적인 작업이 없음"
+ },
+ "FilterType": {
+ "exclude": "제외",
+ "include": "포함",
+ "none": "없음"
+ },
+ "InstallIntent": {
+ "available": "등록된 디바이스에 사용 가능",
+ "availableWithoutEnrollment": "등록 유무에 상관없이 사용 가능",
+ "notApplicable": "적용할 수 없음",
+ "required": "필수",
+ "uninstall": "제거"
+ },
+ "SettingType": {
+ "assignmentType": "할당 유형",
+ "deviceLicensing": "라이선스 형식",
+ "installContext": "디바이스 제거 시 제거",
+ "toastSettings": "최종 사용자 알림",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "기본값",
+ "postponed": "연기됨",
+ "priority": "높은 우선 순위"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "실패",
+ "hardReboot": "하드 재부팅",
+ "retry": "다시 시도",
+ "softReboot": "소프트 재부팅",
+ "success": "성공"
+ },
+ "Columns": {
+ "codeType": "코드 형식",
+ "returnCode": "반환 코드"
+ },
+ "bladeTitle": "반환 코드",
+ "gridAriaLabel": "반환 코드",
+ "header": "설치 후 동작을 나타내기 위한 반환 코드 지정:",
+ "onAddAnnounceMessage": "반환 코드를 통해 {0}/{1}개의 항목이 추가됨",
+ "onDeleteSuccess": "반환 코드 {0}을(를) 삭제함",
+ "returnCodeAlreadyUsedValidation": "반환 코드가 이미 사용되었습니다.",
+ "returnCodeMustBeIntegerValidation": "반환 코드는 정수여야 합니다.",
+ "returnCodeShouldBeAtLeast": "반환 코드는 {0} 이상이어야 합니다.",
+ "returnCodeShouldBeAtMost": "반환 코드는 {0} 이하여야 합니다.",
+ "selectorLabel": "반환 코드"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone 및 iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "네트워크 경계 추가",
+ "addNetworkBoundaryButton": "네트워크 경계 추가...",
+ "allowWindowsSearch": "Windows Search에서 암호화된 회사 데이터 및 스토어 앱을 검색할 수 있도록 허용",
+ "authoritativeIpRanges": "엔터프라이즈 IP 범위 목록을 신뢰할 수 있음(자동 검색 안 함)",
+ "authoritativeProxyServers": "엔터프라이즈 프록시 서버 목록을 신뢰할 수 있음(자동 검색 안 함)",
+ "boundaryType": "경계 유형",
+ "cloudResources": "클라우드 리소스",
+ "corporateIdentity": "회사 ID",
+ "dataRecoveryCert": "암호화된 데이터를 복구할 수 있도록 DRA(데이터 복구 에이전트) 인증서를 업로드합니다.",
+ "editNetworkBoundary": "네트워크 경계 편집",
+ "enrollmentState": "등록 상태",
+ "iPv4Ranges": "IPv4 범위",
+ "iPv6Ranges": "IPv6 범위",
+ "internalProxyServers": "내부 프록시 서버",
+ "maxInactivityTime": "디바이스가 유휴 상태로 전환된 후 디바이스의 PIN 또는 암호가 잠기게 되는 최대 허용 시간(분)",
+ "maxPasswordAttempts": "디바이스가 초기화되기 전 허용되는 인증 실패 횟수",
+ "mdmDiscoveryUrl": "MDM 검색 URL",
+ "mdmRequiredSettingsInfo": "이 정책은 Windows 10 1주년 버전 이상에만 적용됩니다. 이 정책에서는 WIP(Windows Information Protection)를 사용하여 보호를 적용합니다.",
+ "minimumPinLength": "PIN에 대해 필요한 최소 문자 수를 설정합니다.",
+ "name": "이름",
+ "networkBoundariesGridEmptyText": "추가하는 모든 네트워크 경계가 여기에 표시됩니다.",
+ "networkBoundary": "네트워크 경계",
+ "networkDomainNames": "네트워크 도메인",
+ "neutralResources": "중립 리소스",
+ "passportForWork": "Windows에 로그인하는 방법으로 비즈니스용 Windows Hello를 사용합니다.",
+ "pinExpiration": "시스템에서 사용자에게 PIN을 변경하도록 요구하기 전에 PIN을 사용할 수 있는 기간(일)을 지정합니다.",
+ "pinHistory": "다시 사용할 수 없는 사용자 계정에 연결할 수 있는 이전 PIN의 숫자를 지정합니다.",
+ "pinLowercaseLetters": "비즈니스용 Windows Hello PIN에 소문자 사용을 구성합니다.",
+ "pinSpecialCharacters": "비즈니스용 Windows Hello PIN에 특수 문자 사용을 구성합니다.",
+ "pinUppercaseLetters": "비즈니스용 Windows Hello PIN에 대문자 사용을 구성합니다.",
+ "protectUnderLock": "디바이스가 잠긴 경우 앱에서 회사 데이터에 액세스할 수 없도록 합니다. Windows 10 Mobile에만 적용됩니다.",
+ "protectedDomainNames": "보호되는 도메인",
+ "proxyServers": "프록시 서버",
+ "requireAppPin": "디바이스 PIN이 관리될 때 앱 PIN을 사용 안 함",
+ "requiredSettings": "필수 설정",
+ "requiredSettingsInfo": "범위를 변경하거나 이 정책을 제거하면 회사 데이터의 암호가 해독됩니다.",
+ "revokeOnMdmHandoff": "디바이스가 MDM에 등록될 때 보호된 데이터에 대한 액세스 취소",
+ "revokeOnUnenroll": "등록 취소 시 암호화 키 취소",
+ "rmsTemplateForEdp": "Azure RMS에 대해 사용할 템플릿 ID를 지정합니다.",
+ "showWipIcon": "엔터프라이즈 데이터 보호 아이콘 표시",
+ "type": "형식",
+ "useRmsForWip": "WIP에 대해 Azure RMS 사용",
+ "value": "값",
+ "weRequiredSettingsInfo": "이 정책은 Windows 10 크리에이터스 업데이트 이상에만 적용됩니다. 이 정책에서는 WIP(Windows Information Protection) 및 Windows MAM을 사용하여 보호를 적용합니다.",
+ "wipProtectionMode": "Windows Information Protection 모드",
+ "withEnrollment": "등록 있음",
+ "withoutEnrollment": "등록 없음"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "아랍어",
+ "bulgarian": "불가리아어",
+ "chineseSimplified": "중국어(간체)",
+ "chineseTraditional": "중국어(번체)",
+ "croatian": "크로아티아어",
+ "czech": "체코어",
+ "danish": "덴마크어",
+ "dutch": "네덜란드어",
+ "englishUK": "영어(영국)",
+ "englishUS": "영어(미국)",
+ "estonian": "에스토니아어",
+ "finnish": "핀란드어",
+ "frenchCanada": "프랑스어(캐나다)",
+ "frenchFrance": "프랑스어(프랑스)",
+ "german": "독일어",
+ "greek": "그리스어",
+ "hebrew": "히브리어",
+ "hungarian": "헝가리어",
+ "italian": "이탈리아어",
+ "japanese": "일본어",
+ "korean": "한국어",
+ "latvian": "라트비아어",
+ "lithuanian": "리투아니아어",
+ "norwegian": "노르웨이어, 보크밀",
+ "polish": "폴란드어",
+ "portugueseBrazil": "포르투갈어(브라질)",
+ "portuguesePortugal": "포르투갈어(포르투갈)",
+ "romanian": "루마니아어",
+ "russian": "러시아어",
+ "serbian": "세르바이어",
+ "slovak": "슬로바키아어",
+ "slovenian": "슬로베니아어",
+ "spanishMexico": "스페인어(멕시코)",
+ "spanishSpain": "스페인어(스페인)",
+ "swedish": "스웨덴어",
+ "thai": "태국",
+ "turkish": "터키어",
+ "ukrainian": "우크라이나어"
+ },
+ "Summary": {
+ "placeholder": "내용을 미리 보려면 왼쪽의 알림 메시지를 선택합니다."
+ },
+ "companyContact": "연락처 정보 표시",
+ "companyLogo": "회사 로고 표시",
+ "companyName": "회사 이름 표시",
+ "createEditDescription": "알림 메시지 템플릿을 만들거나 편집합니다.",
+ "createMessage": "메시지 만들기",
+ "deviceDetails": "장치 세부 정보 표시",
+ "deviceDetailsInfoBox": "장치 세부 정보를 검색하면 이메일 알림 수신이 지연될 수 있으므로 이 설정은 기본적으로 꺼져 있습니다.",
+ "editImpactInfo": "이 알림 메시지 템플릿을 편집하면 이 템플릿을 사용 중인 모든 정책에 영향을 줍니다.",
+ "editMessage": "메시지 편집",
+ "email": "전자 메일",
+ "emailFooterTitle": "전자 메일 바닥글",
+ "emailHeaderFooterInfo": "메일 알림의 메일 머리글 및 바닥글 설정은 Endpoint Manager의 테넌트 관리자 노드 내 사용자 지정 설정을 사용합니다.",
+ "emailHeaderTitle": "전자 메일 헤더",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "사용자 지정 설정 구성",
+ "formSubTitle": "알림 메일 만들기 또는 수정",
+ "headerFooterSettingsTab": "머리글 및 바닥글 설정",
+ "imgPreview": "이미지 미리 보기",
+ "infotext": "알림 메시지를 선택합니다. 새 알림을 만들려면 [디바이스 준수 설정] 워크로드의 [관리] 섹션에서 [알림]으로 이동하세요.",
+ "iwLink": "회사 포털 웹 사이트 링크 표시",
+ "listEmpty": "메시지 템플릿이 없습니다.",
+ "listEmptySelectOnly": "메시지 템플릿이 없습니다. 새 알림을 만들려면 [디바이스 준수 설정] 워크로드의 [관리] 섹션에서 [알림]으로 이동하세요.",
+ "listSubTitle": "알림 메시지 템플릿 목록",
+ "listTitle": "알림 메시지 템플릿",
+ "localizedNotificationMessageTemplates": "지역화된 알림 메시지 템플릿",
+ "messageAssigned": "이 메시지 템플릿은 현재 하나 이상의 준수 정책에서 사용되고 있으므로 삭제할 수 없습니다.",
+ "messageCapitalized": "알림 메시지 템플릿",
+ "messageLowercase": "알림 메시지 템플릿",
+ "missingDefaultError": "기본 템플릿 선택",
+ "notificationMessageTemplates": "알림 메시지 템플릿",
+ "rowValidationError": "메시지 템플릿이 하나 이상 필요함",
+ "selectDescription": "알림 메시지를 선택하세요. 새 알림을 만들려면 [디바이스 준수 설정] 워크로드의 [관리] 섹션에서 [알림]으로 이동하세요.",
+ "tenantValueText": "테넌트 값",
+ "testEmailLabel": "미리 보기 메일 보내기",
+ "localeLabel": "로캘",
+ "isDefaultLocale": "기본값 여부"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "초기 프로비전을 위해 장치를 구성합니다.",
+ "title": "디바이스 준비"
+ },
+ "EnrollmentSettings": {
+ "description": "등록 차단과 같은 등록 설정을 구성하고 사용자에게 할당합니다.",
+ "title": "등록 설정"
+ },
+ "OSConfiguration": {
+ "menuDescription": "사용자가 부팅 가능한 플래시 드라이브에서 Windows를 복구하는 데 사용할 수 있는 설정을 구성합니다.",
+ "menuTitle": "Windows 운영 체제 복구 구성"
+ },
+ "coManagementAuthorityDesc": "Configuration Manager 통합에 대한 공동 관리 설정을 구성합니다.",
+ "coManagementAuthorityTitle": "공동 관리 설정 ",
+ "deploymentProfiles": "Windows AutoPilot 배포 프로필",
+ "description": "사용자 또는 관리자가 Windows 10/11 PC를 Intune에 등록하는 7가지 방법을 알아봅니다.",
+ "descriptionLabel": "Windows 등록 방법",
+ "enrollmentStatusPage": "등록 상태 페이지"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "키에 포함된 비트 수를 선택합니다.",
+ "keyUsage": "인증서의 공개 키를 교환하는 데 필요한 암호화 작업을 지정합니다.",
+ "renewalThreshold": "디바이스가 인증서의 갱신을 요청하기 전에 허용되는 남은 인증서 수명의 백분율(1~99%)을 입력합니다. Intune의 권장 값은 20%입니다(1~99%).",
+ "rootCert": "이전에 구성 및 할당된 루트 CA 인증서 프로필을 선택합니다. CA 인증서는 이 프로필(현재 구성 중인 프로필)에 대해 인증서를 발급 중인 CA의 루트 인증서와 일치해야 합니다.",
+ "scepServerUrl": "SCEP를 통해 인증서를 발급하는 NDES 서버의 URL을 입력합니다(HTTPS여야 함). 예: https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "SCEP를 통해 인증서를 발급하는 NDES 서버의 URL을 하나 이상 추가합니다(HTTPS여야 함). 예: https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "주체 대체 이름",
+ "subjectNameFormat": "주체 이름 형식",
+ "validityPeriod": "인증서가 만료되기 전까지 남은 시간입니다. 인증서 템플릿에 표시된 유효 기간보다 낮거나 같은 값을 입력합니다. 기본값은 1년으로 설정됩니다."
+ },
+ "appInstallContext": "이 앱과 연결할 설치 컨텍스트를 지정합니다. 이중 모드 앱의 경우 이 앱에 대해 원하는 컨텍스트를 선택합니다. 다른 모든 앱의 경우 이 옵션은 패키지에 따라 미리 선택되어 있으며 수정할 수 없습니다.",
+ "autoUpdateMode": "앱의 업데이트 우선 순위를 구성합니다. 앱을 업데이트하기 전에 장치가 Wi-Fi에 연결되고, 충전 중이고, 활발하게 사용되지 않도록 하려면 기본값을 선택합니다. 충전 상태, Wi-Fi 기능 또는 장치에서의 최종 사용자 활동에 관계없이 개발자가 앱을 게시하는 즉시 앱을 업데이트하려면 높은 우선 순위를 선택합니다. 최대 90일 동안 앱 업데이트를 취소하려면 연기됨을 선택합니다. 높은 우선 순위 및 연기는 DO 장치에만 적용됩니다.",
+ "configurationSettingsFormat": "구성 설정 형식 텍스트",
+ "ignoreVersionDetection": "Google Chrome처럼 앱 개발자가 자동으로 업데이트하는 앱의 경우 “예”로 설정합니다.",
+ "ignoreVersionDetectionMacOSLobApp": "앱 개발자가 자동으로 업데이트하는 앱의 경우 또는 설치 전에 앱 bundleID만 확인하려는 경우 \"예\"를 선택합니다. 설치 전에 앱 bundleID 및 버전 번호를 확인하려면 \"아니요\"를 선택합니다.",
+ "installAsManagedMacOSLobApp": "이 설정은 macOS 11 이상에만 적용됩니다. 앱이 설치되지만 macOS 10.15 이하에서는 관리되지 않습니다.",
+ "installContextDropdown": "적절한 설치 컨텍스트를 선택하세요. 사용자 컨텍스트는 대상 사용자에 대해서만 앱을 설치하는 반면 디바이스 컨텍스트는 디바이스의 모든 사용자에 대해 앱을 설치합니다.",
+ "ldapUrl": "클라이언트가 전자 메일 받는 사람에 대한 공개 암호화 키를 가져올 수 있는 LDAP 호스트 이름입니다. 키를 사용할 수 있게 되면 전자 메일이 암호화됩니다. 지원되는 형식:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "연결된 앱에 대한 런타임 권한을 선택합니다.",
+ "policyAssociatedApp": "이 정책과 연결할 앱을 선택합니다.",
+ "policyConfigurationSettings": "이 정책에 대한 구성 설정을 정의하는 데 사용할 방법을 선택합니다.",
+ "policyDescription": "필요에 따라 이 구성 정책에 대한 설명을 입력합니다.",
+ "policyEnrollmentType": "이 설정을 디바이스 관리 또는 Intune SDK로 만든 앱을 통해 관리할지를 선택하세요.",
+ "policyName": "이 구성 정책의 이름을 입력합니다.",
+ "policyPlatform": "이 앱 구성 정책을 적용할 플랫폼을 선택합니다.",
+ "policyProfileType": "이 앱 구성 프로필을 적용할 디바이스 프로필 유형을 선택합니다.",
+ "policySMime": "Outlook에 대한 S/MIME 서명 및 암호화 설정을 구성합니다.",
+ "sMimeDeployCertsFromIntune": "S/MIME 인증서가 Outlook에서 사용하기 위해 Intune에서 배달되는지 여부를 지정합니다.\r\nIntune은 회사 포털을 통해 자동으로 서명 및 암호화 인증서를 사용자에게 배포합니다.",
+ "sMimeEnable": "메일을 작성할 때 S/MIME 컨트롤 사용 여부를 지정합니다.",
+ "sMimeEnableAllowChange": "사용자가 [S/MIME 사용] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "sMimeEncryptAllEmails": "메일을 모두 암호화해야 하는지 여부를 지정합니다.\r\n암호화 기능은 의도된 수신자만 데이터를 읽을 수 있도록 데이터를 암호화 텍스트로 변환합니다.",
+ "sMimeEncryptAllEmailsAllowChange": "사용자가 [모든 메일 암호화] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "sMimeEncryptionCertProfile": "메일 암호화에 사용할 인증서 프로필을 지정하세요.",
+ "sMimeSignAllEmails": "모든 메일에 서명해야 하는지 여부를 지정합니다.\r\n디지털 서명은 메일의 신뢰성을 확인하고 전송 중에 내용이 훼손되지 않았는지 확인합니다.",
+ "sMimeSignAllEmailsAllowChange": "사용자가 [모든 메일 서명] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "sMimeSigningCertProfile": "메일 서명에 사용할 인증서 프로필을 지정하세요.",
+ "sMimeUserNotificationType": "Outlook용 S/MIME 인증서를 검색하려면 회사 포털을 열어야 함을 사용자에게 알리는 방법입니다."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0}은(는) 하나 이상의 정책 집합에 포함되어 있습니다. {0}을(를) 삭제하면 이러한 정책 집합을 통해 더 이상 할당할 수 없게 됩니다. 그래도 삭제하시겠습니까?",
+ "contentWithError": "{0}은(는) 하나 이상의 정책 집합에 포함되어 있을 수 있습니다. {0}을(를) 삭제하면 이러한 정책 집합을 통해 더 이상 할당할 수 없게 됩니다. 그래도 삭제하시겠습니까?",
+ "header": "이 제한을 삭제하시겠습니까?"
+ },
+ "DeviceLimit": {
+ "description": "사용자가 등록할 수 있는 최대 디바이스 수를 지정합니다.",
+ "header": "디바이스 개수 제한",
+ "info": "각 사용자가 등록할 수 있는 디바이스 수를 정의합니다."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "1.0 이상이어야 합니다.",
+ "android": "올바른 버전 번호를 입력합니다. 예: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "유효한 버전 번호를 입력합니다. 예: 5.0, 5.1.1",
+ "iOS": "올바른 버전 번호를 입력합니다. 예: 9.0, 10.0, 9.0.2",
+ "mac": "올바른 버전 번호를 입력하세요. 예: 10, 10.10, 10.10.1",
+ "min": "최소값은 {0}보다 작을 수 없습니다.",
+ "minMax": "최소 버전이 최대 버전보다 클 수 없습니다.",
+ "windows": "10.0 이상이어야 합니다. 8.1 디바이스를 허용하려면 비워 둡니다.",
+ "windowsMobile": "10.0 이상이어야 합니다. 8.1 디바이스를 허용하려면 비워 둡니다."
+ },
+ "allPlatformsBlocked": "모든 디바이스 플랫폼이 차단됩니다. 플랫폼 구성을 사용하려면 플랫폼 등록을 허용하세요.",
+ "blockManufacturerPlaceHolder": "제조업체 이름",
+ "blockManufacturersHeader": "차단된 제조업체",
+ "cannotRestrict": "제한이 지원되지 않습니다.",
+ "configurationDescription": "디바이스를 등록하기 위해 충족해야 하는 플랫폼 구성 제한을 지정합니다. 등록 후 준수 정책을 사용하여 디바이스를 제한할 수 있습니다. 버전을 major.minor.build로 정의합니다. 버전 제한은 회사 포털로 등록된 디바이스에만 적용됩니다. Intune은 기본적으로 디바이스를 개인 소유로 분류합니다. 디바이스를 회사 소유로 분류하려면 추가 작업이 필요합니다.",
+ "configurationDescriptionLabel": "등록 제한 설정에 대해 자세히 알아보기",
+ "configurations": "플랫폼 구성",
+ "deviceManufacturer": "장치 제조업체",
+ "header": "디바이스 유형 제한",
+ "info": "등록할 수 있는 플랫폼, 버전 및 관리 유형을 정의합니다.",
+ "manufacturer": "제조업체",
+ "max": "최대",
+ "maxVersion": "최대 버전",
+ "min": "최소",
+ "minVersion": "최소 버전",
+ "newPlatforms": "새 플랫폼을 허용했습니다. 플랫폼 구성 업데이트를 고려하세요.",
+ "personal": "개인적으로 소유함",
+ "platform": "플랫폼",
+ "platformDescription": "다음 플랫폼의 등록을 허용할 수 있습니다. 지원하지 않을 플랫폼만 차단합니다. 허용된 플랫폼에 대해 추가 등록 제한을 구성할 수 있습니다.",
+ "platformSettings": "플랫폼 설정",
+ "platforms": "플랫폼 선택",
+ "platformsSelected": "{0}개의 플랫폼 선택됨",
+ "type": "유형",
+ "versions": "버전",
+ "versionsRange": "최소/최대 범위 허용:",
+ "windowsTooltip": "모바일 디바이스 관리를 통해 등록을 제한합니다. PC 에이전트 설치를 제한하지 않습니다. Windows 10 및 Windows 11 버전만 지원됩니다. Windows 8.1을 허용하려면 버전을 비워 두세요."
+ },
+ "Priority": {
+ "saved": "제한 우선 순위를 저장했습니다."
+ },
+ "Row": {
+ "announce": "우선 순위: {0}, 이름: {1}, 할당: {2}"
+ },
+ "Table": {
+ "deployed": "배포됨",
+ "name": "이름",
+ "priority": "우선 순위"
+ },
+ "Type": {
+ "limit": "디바이스 개수 제한",
+ "type": "디바이스 유형 제한"
+ },
+ "allUsers": "모든 사용자",
+ "androidRestrictions": "Android 제한 사항",
+ "create": "제한 만들기",
+ "defaultLimitDescription": "그룹 멤버 자격에 상관없이 모든 사용자에게 우선 순위가 가장 낮게 적용된 기본 디바이스 개수 제한입니다.",
+ "defaultTypeDescription": "그룹 멤버 자격에 상관없이 모든 사용자에게 우선 순위가 가장 낮게 적용된 기본 디바이스 유형 제한입니다.",
+ "defaultWhfbDescription": "그룹 멤버 자격과 상관없이 모든 사용자에게 우선 순위가 가장 낮게 적용된 기본 비즈니스용 Windows Hello 구성입니다.",
+ "deleteMessage": "영향을 받는 사용자가 할당된 다음 최고 우선 순위 제한으로 제한되거나 다른 제한이 할당되지 않은 경우 기본 제한으로 제한됩니다.",
+ "deleteTitle": "{0} 제한을 삭제할까요?",
+ "descriptionHint": "제한 설정을 통해 특징이 지정된 비즈니스 사용 목적 또는 제한 수준을 간단히 설명합니다.",
+ "edit": "편집 제한",
+ "info": "디바이스는 사용자에게 할당된 우선 순위가 가장 높은 등록 제한을 준수해야 합니다. 디바이스 제한을 끌어서 우선 순위를 변경할 수 있습니다. 기본 제한은 모든 사용자에 대해 가장 낮은 우선 순위이며 사용자가 없는 등록을 제어합니다. 기본 제한을 편집할 수 있지만 삭제할 수는 없습니다.",
+ "iosRestrictions": "iOS 제한 사항",
+ "mDM": "MDM",
+ "macRestrictions": "macOS 제한 사항",
+ "maxVersion": "최대 버전",
+ "minVersion": "최소 버전",
+ "nameHint": "제한 집합 식별을 위해 표시되는 주 특성입니다.",
+ "noAssignmentsStatusBar": "하나 이상의 그룹에 제한을 할당하세요. [속성]을 클릭하세요.",
+ "nonAdminForbiddenCreateError": "제한을 만들거나 편집하거나 삭제하려면 Intune 서비스 또는 전역 관리자여야 합니다.",
+ "nonAdminForbiddenEdit": "제한을 편집하려면 관리자여야 합니다.",
+ "notFound": "제한을 찾을 수 없습니다. 이미 삭제되었을 수 있습니다.",
+ "personallyOwned": "개인적으로 소유한 디바이스",
+ "restriction": "제한",
+ "restrictionLowerCase": "제한",
+ "restrictionType": "Restriction type",
+ "selectType": "제한 유형 선택",
+ "selectValidation": "플랫폼 선택",
+ "typeHint": "[디바이스 유형 제한]을 선택하여 디바이스 속성을 제한합니다. [디바이스 개수 제한]을 선택하여 사용자당 디바이스 수를 제한합니다.",
+ "typeRequired": "제한 유형이 필요합니다.",
+ "winPhoneRestrictions": "Windows Phone 제한 사항",
+ "windowsECv1Info": "이전 등록 제한은 편집하거나 다시 할당할 수’없으며 삭제만 가능합니다.",
+ "windowsECv2Info": "등록 제한을 드래그 앤 드롭하여 우선 순위를 지정할 수 있습니다. 아래에서 기본 및 미리 구성된 제한 사항을 확인하세요. 모든 새로운 등록 제한은 기본 및 사전 구성된 제한보다 우선 순위가 높습니다.",
+ "windowsRestrictions": "Windows 제한 사항",
+ "windowsRestrictionsPreview": "필터 기반 Windows 제한 사항(미리 보기)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1일",
+ "twoDays": "2일",
+ "zeroDays": "0일"
+ },
+ "SecurityTemplate": {
+ "aSR": "공격 표면 감소",
+ "accountProtection": "계정 보호",
+ "allDevices": "모든 디바이스",
+ "antivirus": "바이러스 백신",
+ "antivirusReporting": "바이러스 백신 보고(미리 보기)",
+ "conditionalAccess": "조건부 액세스",
+ "deviceCompliance": "디바이스 준수",
+ "diskEncryption": "디스크 암호화",
+ "eDR": "엔드포인트 검색 및 응답",
+ "ePM": "엔드포인트 권한 관리",
+ "firewall": "방화벽",
+ "helpSupport": "도움말 및 지원",
+ "setup": "설치",
+ "wdapt": "엔드포인트용 Microsoft Defender"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "데이터 보호 구성"
+ },
+ "OrganizeMailByThread": {
+ "title": "스레드별로 메일 구성",
+ "tooltip": "Outlook의 기본 동작은 메일 대화를 스레드된 대화 보기로 묶는 것입니다. 이 설정을 사용하지 않도록 설정하는 경우 Outlook은 각 메일을 개별적으로 표시하며 스레드별로 그룹화하지 않습니다."
+ },
+ "Sync": {
+ "header": "연락처 필드를 기본 연락처 앱 구성과 동기화"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "allowBiometricsTitle": "앱에 액세스하려면 생체 인식 필요",
+ "allowBiometricsTooltip": "사용자가 디바이스의 앱에 액세스하려면 TouchID 또는 FaceID 같은 생체 인식이 필요할 수 있습니다. 필요한 경우 생체 인식은 이 프로필에서 선택된 인증 방법과 함께 사용됩니다. Intune 앱 보호 정책에 관리되는 데이터에 액세스하기 전 액세스 요구 사항이 포함되므로, 이 앱 보호 정책이 배포될 때 이 설정은 사용하도록 설정되어 있지 않아야 합니다. 둘 다 사용하도록 설정하면 Outlook 모바일에 액세스하는 데 여러 액세스 프롬프트가 발생합니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [끄기]로 설정됩니다.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "allowCalendarNotificationsTitle": "일정 알림",
+ "allowCalendarNotificationsTooltip": "앱 보호 정책 설정 \"조직 데이터 알림\"이 \"조직 데이터 차단\"으로 설정된 경우 일정 알림이 전체 세부 정보를 표시하도록 허용합니다.",
+ "allowDefaultAppSignatureTitle": "기본 앱 서명",
+ "allowDefaultAppSignatureTooltip": "기본 앱 서명은 앱이 메시지 작성 중 기본 서명으로 “iOS용 Outlook 다운로드”를 사용할지를 나타냅니다. 설정이 [끄기]로 구성된 경우 기본 서명은 사용되지 않지만, 사용자가 고유한 서명을 추가할 수 있습니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다.",
+ "allowExternalRecipientsMailTipTitle": "외부 받는 사람 메일 설명",
+ "allowExternalRecipientsMailTipTooltip": "보낸 사람이 외부 받는 사람을 추가하거나 외부 받는 사람이 포함된 메일 그룹을 추가하면 외부 받는 사람 메일 설명이 표시됩니다. 이 메일 설명은 작성하는 메시지가 조직에서 나갈지를 보낸 사람에게 알려 단어, 어조 및 내용을 올바르게 결정할 수 있도록 합니다. 하이브리드 최신 인증을 사용하는 Exchange Online 계정 및 온-프레미스 계정에만 사용할 수 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [켜기]로 설정됩니다.",
+ "allowFocusedInboxTitle": "중요 받은 편지함",
+ "allowFocusedInboxTooltip": "중요 받은 편지함은 받은 편지함을 [중요]와 [기타]의 두 탭으로 나눕니다. 가장 중요한 메일은 [중요] 탭에 있으며, 나머지 메일은 여전히 쉽게 액세스할 수 있지만 방해되지 않도록 [기타] 탭에 있습니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다.",
+ "allowMailNotificationsAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "allowMailNotificationsTitle": "메일 알림",
+ "allowMailNotificationsTooltip": "이 값은 Outlook이 메일 알림을 허용하는지를 지정합니다. 이 값을 [아니요]로 설정하면 메일 알림을 사용할 수 없습니다.",
+ "allowOrgDataOnWearablesTitle": "착용식 디바이스의 조직 데이터",
+ "allowOrgDataOnWearablesTooltip": "이 값은 Outlook이 착용식 디바이스와 동기화될 수 있는지를 지정합니다. 이 값을 [아니요]로 설정하면 착용식 디바이스 동기화를 사용할 수 없습니다.",
+ "allowSaveContactsAllowUserChangeTooltip": "사용자가 연락처 동기화 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "allowSaveContactsTitle": "연락처 저장",
+ "allowSaveContactsTooltip": "모바일 디바이스의 기본 주소록에 연락처를 저장하면 새 통화 및 문자 메시지를 사용자의 기존 Outlook 연락처에 연결할 수 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [끄기]로 설정됩니다.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "allowSmartReplyTitle": "제안된 회신",
+ "allowSmartReplyTooltip": "메시지를 열면 Outlook에서 메시지 아래에 회신이 제안될 수 있습니다. 제안된 회신을 선택하면 회신을 보내기 전에 편집할 수 있습니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다.",
+ "allowUserChangeGeneralToolTip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "allowUserChangeTitle": "사용자가 설정을 변경할 수 있도록 허용",
+ "blockExternalImagesAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "blockExternalImagesTitle": "외부 이미지 차단",
+ "blockExternalImagesTooltip": "[외부 이미지 차단]이 사용하도록 설정된 경우 앱에서 메시지 본문에 포함된 인터넷에서 호스트되는 이미지의 다운로드를 방지합니다. [구성되지 않음]으로 설정된 경우 기본 앱 설정은 [끄기]로 설정됩니다.",
+ "disableAddinsTitle": "추가 기능 허용",
+ "disableAddinsTooltip": "기본적으로 앱 보호 정책은 사용자가 타사 추가 기능을 사용할 수 있도록 허용하지만 \"정책 관리형 앱 데이터를 기본 앱 또는 추가 기능과 동기화\" 설정을 통해 추가 기능을 차단하는 데 사용할 수 있습니다. 이 설정을 \"끄기\"로 구성하면 앱 보호 정책 설정이 허용으로 설정된 경우 추가 기능이 차단됩니다.",
+ "discoverFeedTitle": "피드 검색",
+ "discoverFeedTooltip": "피드 검색에는 가장 자주 액세스하는 Office 파일이 표시됩니다. 기본적으로, Delve가 해당 사용자에게 사용하도록 설정된 경우 이 피드를 사용할 수 있습니다. 구성되지 않음으로 설정하면 기본 앱 설정이 On으로 설정됩니다.",
+ "enableSMIMETitle": "S/MIME 사용",
+ "enableSMIMETooltip": "전자 메일을 작성할 때 S/MIME 컨트롤의 사용 여부를 지정합니다.",
+ "encryptAllEmails": "모든 전자 메일 암호화",
+ "encryptAllEmailsAllowUserChangeTooltip": "사용자가 [모든 전자 메일 암호화] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "encryptAllEmailsTooltip": "전자 메일을 모두 암호화해야 하는지 여부를 지정합니다. 암호화 기능은 의도된 수신자만 데이터를 읽을 수 있도록 데이터를 암호화 텍스트로 변환합니다.",
+ "ldapUrl": "LDAP URL",
+ "ldapUrlTooltip": "클라이언트가 전자 메일 받는 사람에 대한 공개 암호화 키를 가져올 수 있는 LDAP 호스트 이름입니다. 키를 사용할 수 있게 되면 전자 메일이 암호화됩니다. 지원되는 형식: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "nativeCalendarSyncMAMOnlyTitle": "일정 동기화 허용",
+ "nativeCalendarSyncMAMOnlyTooltip": "기본적으로 앱 보호 정책을 사용하면 기본 일정 앱으로 일정을 동기화할 수 있지만 일정 동기화를 사용하지 못하도록 차단하는 데 활용될 수 있습니다. 이 설정은 앱 보호 정책 설정과 별개로 작동하며 조직에서 회사 또는 학교 계정에 대해 일정 동기화를 사용할 수 있는지 여부를 정의할 수 있도록 합니다.",
+ "nativeCalendarSyncTitle": "일정 동기화",
+ "nativeCalendarSyncTooltip": "기본적으로 앱 보호 정책은 기본 일정 앱에 일정을 동기화하는 것을 허용하지만 \"정책 관리형 앱 데이터를 기본 앱 또는 추가 기능과 동기화\" 설정을 통해 일정 동기화 가용성을 차단하는 데 사용할 수 있습니다. 이 설정을 \"끄기\"로 구성하면 앱 보호 정책 설정이 허용으로 설정된 경우 일정 동기화가 차단됩니다.",
+ "playMyEmailsTitle": "내 전자 메일 재생",
+ "playMyEmailsTooltip": "[내 전자 메일 재생] 기능은 앱에서 기본적으로 사용하도록 설정되지 않지만 받은 편지함의 배너를 통해 적격 사용자로 수준이 올라갑니다. 이 기능이 [꺼짐]으로 설정되면 앱에서 적격 사용자로 수준이 올라가지 않습니다. 사용자는 이 기능이 [꺼짐]으로 설정된 경우에도 앱 내에서 [내 전자 메일 재생]을 수동으로 사용하도록 설정할 수 있습니다. [구성되지 않음]으로 설정하는 경우 기본 앱 설정은 [켜짐]이고 적격 사용자로 기능의 수준이 올라갑니다.",
+ "signAllEmails": "모든 전자 메일 서명",
+ "signAllEmailsAllowUserChangeTooltip": "사용자가 [모든 전자 메일 서명] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
+ "signAllEmailsTooltip": "모든 전자 메일에 서명해야 하는지 여부를 지정합니다. 디지털 서명은 메일의 신뢰성을 확인하고 전송 중에 내용이 훼손되지 않았는지 확인합니다.",
+ "syncAddressTitle": "주소",
+ "syncAddressTooltip": "이 값은 연락처의 주소를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncBirthdayTitle": "생년월일",
+ "syncBirthdayTooltip": "이 값은 연락처의 생일을 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncCompanyTitle": "회사",
+ "syncCompanyTooltip": "이 값은 연락처의 회사 이름을 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncDepartmentTitle": "부서",
+ "syncDepartmentTooltip": "이 값은 연락처의 부서를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncEmailAddressTitle": "전자 메일 주소",
+ "syncEmailAddressTooltip": "이 값은 연락처의 메일 주소를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncInstantMessagingAddressTitle": "인스턴트 메시징 주소",
+ "syncInstantMessagingAddressTooltip": "이 값은 연락처의 인스턴트 메시징 주소를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncJobTitleTitle": "직함",
+ "syncJobTitleTooltip": "이 값은 연락처의 직위를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncNicknameTitle": "애칭",
+ "syncNicknameTooltip": "이 값은 연락처의 애칭을 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncNotesTitle": "Notes",
+ "syncNotesTooltip": "이 값은 연락처의 메모를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncPhoneHomeFaxNumberTitle": "전화 집 팩스 번호",
+ "syncPhoneHomeFaxNumberTooltip": "이 값은 연락처의 집 팩스 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncPhoneHomeNumberTitle": "전화 집 번호",
+ "syncPhoneHomeNumberTooltip": "이 값은 연락처의 집 전화 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncPhoneMobileNumberTitle": "전화 휴대폰 번호",
+ "syncPhoneMobileNumberTooltip": "이 값은 연락처의 휴대폰 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncPhoneOtherNumberTitle": "전화 기타 번호",
+ "syncPhoneOtherNumberTooltip": "이 값은 연락처의 기타 전화 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncPhonePagerNumberTitle": "전화 호출기 번호",
+ "syncPhonePagerNumberTooltip": "이 값은 연락처의 호출기 전화 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncPhoneWorkFaxNumberTitle": "전화 회사 팩스 번호",
+ "syncPhoneWorkFaxNumberTooltip": "이 값은 연락처의 회사 팩스 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncPhoneWorkNumberTitle": "전화 회사 번호",
+ "syncPhoneWorkNumberTooltip": "이 값은 회사 전화 번호를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncPrefixTitle": "이름 접두사",
+ "syncPrefixTooltip": "이 값은 연락처의 이름 접두사를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "syncSuffixTitle": "이름 접미사",
+ "syncSuffixTooltip": "이 값은 연락처의 이름 접미사를 기본 연락처와 동기화해야 하는지를 지정합니다.",
+ "textPredictionsTitle": "텍스트 예측",
+ "textPredictionsTooltip": "Outlook에서 메시지를 작성할 때 단어와 구를 제안할 수 있습니다. Outlook에서 단어나 구를 제안하는 경우 수락하려면 제안된 단어나 구를 살짝 밉니다. [구성되지 않음]으로 설정하면 기본 앱 설정이 [켜기]로 설정됩니다.",
+ "themesEnabledTitle": "테마 사용",
+ "themesEnabledTooltip": "사용자가 사용자 지정 시각적 개체 테마를 사용할 수 있는지 여부를 지정합니다."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "이 설정을 사용하여 회사에서 사용이 승인되지 않은 앱을 어떤 사용자가 설치하는지 알 수 있습니다. 제한된 앱 목록 유형을 선택하세요.
\r\n 금지된 앱 - 사용자가 앱을 설치할 때 알림을 받고 싶은 앱 목록입니다. \r\n 승인된 앱 - 회사에서 사용이 승인된 앱 목록입니다. 이 목록에 없는 앱을 사용자가 설치하면 알림을 받게 됩니다. \r\n ",
+ "androidZebraMxZebraMx": "MX 프로필을 XML 형식으로 업로드하여 Zebra 디바이스를 구성합니다.",
+ "iosDeviceFeaturesAirprint": "네트워크의 AirPrint 호환 프린터에 자동으로 연결하도록 iOS 디바이스를 구성하는 데 이러한 설정을 사용합니다. 프린터의 IP 주소 및 리소스 경로가 필요합니다.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "iOS 13.0 이상을 실행하는 디바이스에 SSO(Single Sign-On)를 사용하도록 설정하는 앱 확장을 구성합니다.",
+ "iosDeviceFeaturesHomeScreenLayout": "iOS 디바이스에서 도크 및 홈 화면에 대한 레이아웃을 구성합니다. 특정 디바이스에서는 표시할 수 있는 항목 수가 제한될 수 있습니다.",
+ "iosDeviceFeaturesIOSWallpaper": "iOS 디바이스의 홈 화면 및/또는 잠금 화면에 나타나는 이미지를 표시합니다.\r\n 각 위치에 고유한 이미지를 표시하려면 잠금 화면 이미지를 사용하여 프로필을 하나 만들고, 홈 화면 이미지를 사용하여 프로필을 하나 만듭니다.\r\n 그런 다음 두 프로필을 모두 사용자에게 할당합니다.\r\n \r\n
\r\n
최대 파일 크기: 750KB
\r\n
파일 형식: PNG, JPG 또는 JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "앱에 대한 알림 설정을 지정합니다. iOS 9.3 이상을 지원합니다.",
+ "iosDeviceFeaturesSharedDevice": "잠긴 화면에 표시되는 선택적 텍스트를 지정하세요. iOS 9.3 이상에서 지원됩니다. 자세한 정보",
+ "iosGeneralApplicationRestrictions": "이 설정을 사용하여 회사에서 사용이 승인되지 않은 앱을 어떤 사용자가 설치하는지 알 수 있습니다. 제한된 앱 목록 유형을 선택하세요.
\r\n 금지된 앱 - 사용자가 앱을 설치할 때 알림을 받고 싶은 앱 목록입니다. \r\n 승인된 앱 - 회사에서 사용이 승인된 앱 목록입니다. 이 목록에 없는 앱을 사용자가 설치하면 알림을 받게 됩니다. \r\n ",
+ "iosGeneralApplicationVisibility": "표시된 앱 목록을 사용하여 사용자가 보거나 실행할 수 있는 iOS 앱을 지정하세요. 숨겨진 앱 목록을 사용하여 사용자가 보거나 실행할 수 있는 iOS 앱을 지정하세요.",
+ "iosGeneralAutonomousSingleAppMode": "이 목록에 추가하고 디바이스에 할당하는 앱은 해당 앱이 실행될 때에만 작동하도록 디바이스를 잠그거나, 특정 작업이 실행 중인 동안(예: 테스트 수행) 디바이스를 잠글 수 있습니다. 작업을 완료하거나 제한을 제거하면 디바이스가 정상 상태로 돌아옵니다.",
+ "iosGeneralKiosk": "키오스크 모드는 다양한 설정을 디바이스에 잠그거나 디바이스에서 실행할 수 있는 단일 앱을 지정합니다. 이 모드는 디바이스에서 단일 데모 앱만 실행하려는 소매점과 같은 환경에서 유용합니다.",
+ "macDeviceFeaturesAirprint": "이러한 설정을 사용하여 macOS 디바이스가 네트워크의 AirPrint 호환 프린터에 자동으로 연결되도록 구성합니다. 프린터의 IP 주소와 리소스 경로가 필요합니다.",
+ "macDeviceFeaturesAssociatedDomains": "조직의 앱과 웹 사이트 간에 데이터와 로그인 자격 증명을 공유하도록 연결된 도메인을 구성합니다. 이 프로필은 macOS 10.15 이상을 실행하는 디바이스에 적용할 수 있습니다.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "macOS 10.15 이상을 실행하는 디바이스에 SSO(Single Sign-On)를 사용하도록 설정하는 앱 확장을 구성합니다.",
+ "macDeviceFeaturesLoginItems": "사용자가 디바이스에 로그인할 때 열리는 앱, 파일 및 폴더를 선택합니다. 사용자가 선택된 앱이 열리는 방식을 변경하지 못하도록 하려는 경우 사용자 구성에서 앱을 숨길 수 있습니다.",
+ "macDeviceFeaturesLoginWindow": "macOS 로그인 화면의 모양과 로그인 전후 사용자가 사용할 수 있는 기능을 구성합니다.",
+ "macExtensionsKernelExtensions": "이러한 설정을 사용하여 10.13.2 이상을 실행하는 macOS 디바이스에서 커널 확장 정책을 구성합니다.",
+ "macGeneralDomains": "사용자가 보내거나 받는 메일 중 여기에 지정하는 도메인과 일치하지 않는 메일은 신뢰할 수 없는 것으로 표시됩니다.",
+ "windows10EndpointProtectionApplicationGuard": "Microsoft Edge를 사용하는 동안 Microsoft Defender Application Guard는 조직에서 신뢰할 수 있는 사이트로 정의되지 않은 사이트로부터 환경을 보호합니다. 사용자가 격리된 네트워크 경계 목록에 없는 사이트를 방문하면 사이트가 Hyper-V의 가상 브라우징 세션에서 열립니다. 신뢰할 수 있는 사이트는 [디바이스 구성]에서 구성할 수 있는 네트워크 경계에 의해 정의됩니다. 이 기능은 Windows 10(64비트) 이상의 운영체제가 설치된 디바이스에 대해서만 사용할 수 있습니다.",
+ "windows10EndpointProtectionCredentialGuard": "Credential Guard를 사용하도록 설정하면 다음과 같은 필수 설정이 사용하도록 설정됩니다.\r\n \r\n
\r\n
가상화 기반 보안 사용: 다음 다시 부팅 시 VBS(가상화 기반 보안)를 켭니다. 가상화 기반 보안에서는 Windows 하이퍼바이저를 사용하여 보안 서비스에 대한 지원을 제공합니다.
\r\n \r\n
보안 부팅 및 DMA(직접 메모리 액세스): 보안 부팅 및 DMA(직접 메모리 액세스)를 통해 VBS를 켭니다.
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Microsoft Defender 애플리케이션 제어를 통해 감사해야 하거나 실행을 신뢰할 수 있는 추가 앱을 선택합니다. Windows 구성 요소 및 Windows 스토어의 모든 앱은 자동으로 실행이 신뢰됩니다.
\r\n \"감사 전용\" 모드에서 실행될 때는 애플리케이션이 차단되지 않습니다. \"감사 전용\" 모드에서는 모든 이벤트가 로컬 클라이언트 로그에 기록됩니다.\r\n ",
+ "windows10GeneralPrivacyPerApp": "“기본 개인 정보 보호”에서 정의한 것과 개인 정보 보호 방식이 달라야 하는 앱을 추가합니다.",
+ "windows10NetworkBoundaryNetworkBoundary": "네트워크 경계는 엔터프라이즈 네트워크에 있는 컴퓨터의 클라우드에 호스트된 도메인 및 IP 주소 범위 같은 엔터프라이즈 리소스의 목록입니다. 네트워크 경계를 정의하여 이러한 위치에 있는 데이터를 보호하는 정책을 적용하세요.",
+ "windowsHealthMonitoring": "Windows 상태 모니터링 정책을 구성합니다.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone은 사용자가 금지된 앱 목록에 지정된 앱이나 승인된 앱 목록에서 지정되지 않은 앱을 설치 또는 실행하지 못하도록 차단할 수 있습니다. 관리되는 앱은 모두 승인된 목록에 추가해야 합니다."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "기술자 단계에서 선택한 차단 앱만 실패",
+ "apps": "앱",
+ "appsListName": "애플리케이션 목록",
+ "blockingApps": "차단 앱",
+ "managedApps": "관리되는 앱",
+ "noApps": "애플리케이션 없음",
+ "noAppsError": "애플리케이션을 검색하는 동안 오류가 발생했습니다.",
+ "selectApps": "앱 선택",
+ "selectedAppsCount": "{0}개의 앱이 선택됨(최대 100개)",
+ "useSelectedAppsAll": "모두",
+ "useSelectedAppsSelected": "선택한 상태",
+ "useSelectedAppsToggleLabel": "사용자/디바이스에 할당된 경우 필수 앱이 설치될 때까지 디바이스 사용 차단"
+ },
+ "Header": {
+ "application": "애플리케이션",
+ "publisher": "게시자",
+ "version": "버전"
+ },
+ "SearchBox": {
+ "ariaLabel": "앱 검색",
+ "placeHolder": "이름 또는 게시자로 검색"
+ },
+ "allowToUseToggle": "설치 오류가 발생하는 경우 사용자가 디바이스를 사용할 수 있도록 허용",
+ "blockToggle": "모든 앱 및 프로필이 설치될 때까지 디바이스 사용 차단",
+ "blockToolTip": "예를 들어 이 목록에 Microsoft Word를 추가하면 대상 사용자와 장치는 Word가 성공적으로 설치될 때까지 등록 상태 페이지를 나갈 수 없습니다.",
+ "collectLogToggle": "최종 사용자에 대한 로그 수집 및 진단 페이지 켜기",
+ "create": "프로필 만들기",
+ "customMessageTextBox": "오류 메시지",
+ "customMessageToggle": "시간 제한 또는 오류 발생 시 사용자 지정 메시지 표시",
+ "enableForAutopilotOnlyToggle": "OOBE(첫 실행 경험)로 프로비저닝된 디바이스에만 페이지를 표시합니다.",
+ "installQualityUpdatesToggle": "Windows 품질 업데이트 설치(디바이스를 다시 시작할 수 있음)(미리 보기)",
+ "progressToggle": "앱 및 프로필 구성 진행률 표시",
+ "resetToggle": "설치 오류가 발생하는 경우 사용자가 디바이스를 초기화할 수 있도록 허용",
+ "timeout": "설치 작업이 지정된 시간(분)보다 오래 걸리는 경우 오류 표시"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "속성",
+ "rule": "규칙",
+ "ruleDetails": "규칙 정보",
+ "value": "값"
+ },
+ "assignIf": "다음과 같은 경우 프로필 할당",
+ "deleteWarning": "선택한 적용 가능성 규칙이 삭제됩니다.",
+ "dontAssignIf": "다음과 같은 경우 프로필을 할당하지 않음",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "및 추가 {0}개",
+ "instructions": "할당된 그룹 내에서 이 프로필을 적용하는 방법을 지정합니다. Intune은 이러한 규칙의 결합된 조건을 충족하는 디바이스에만 프로필을 적용합니다.",
+ "maxText": "최대",
+ "minText": "최소",
+ "noActionRow": "적용 가능성 규칙이 지정되지 않음",
+ "oSVersion": "예: 1.2.3.4",
+ "toText": "끝",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise KN",
+ "windows10HolographicEnterprise": "비즈니스용 Windows 10 홀로그래픽",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home Kn",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home 단일 언어",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "OS 버전",
+ "windows10OsVersion": "OS 버전",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "사용자가 설정을 변경할 수 있도록 허용",
+ "tooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다."
+ },
+ "AllowWorkAccounts": {
+ "title": "회사 또는 학교 계정만 허용",
+ "tooltip": " 이 설정을 사용하도록 설정하면 사용자가 Outlook 내에서 개인 메일 및 스토리지 계정을 추가할 수 없습니다. 사용자가 Outlook에 개인 계정을 추가한 경우 개인 계정을 제거하라는 메시지가 표시됩니다. 사용자가 개인 계정을 제거하지 않으면 회사 또는 학교 계정을 추가할 수 없습니다."
+ },
+ "BlockExternalImages": {
+ "title": "외부 이미지 차단",
+ "tooltip": "블록 외부 이미지를 사용하도록 설정하면 앱에서 인터넷에 호스트되어 있는 메시지 본문에 포함된 이미지 다운로드를 방지합니다. 구성되지 않도록 설정하면 기본 앱 설정이 [끄기]로 설정됩니다."
+ },
+ "ConfigureEmail": {
+ "title": "메일 계정 설정 구성"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "기본 앱 서명은 앱이 메시지 작성 중 기본 서명으로 “Android용 Outlook 다운로드”를 사용할지 여부를 나타냅니다. 설정이 [끄기]로 구성된 경우 기본 서명은 사용되지 않지만, 사용자가 고유한 서명을 추가할 수 있습니다.\r\n\r\n[구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다.",
+ "iOS": "기본 앱 서명은 앱이 메시지 작성 중 기본 서명으로 “iOS용 Outlook 다운로드”를 사용할지 여부를 나타냅니다. 설정이 [끄기]로 구성된 경우 기본 서명은 사용되지 않지만, 사용자가 고유한 서명을 추가할 수 있습니다.\r\n\r\n[구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다."
+ },
+ "title": "기본 앱 서명"
+ },
+ "OfficeFeedReplies": {
+ "title": "피드 검색",
+ "tooltip": "피드 검색에는 가장 자주 액세스하는 Office 파일이 표시됩니다. 기본적으로, Delve가 해당 사용자에게 사용하도록 설정된 경우 이 피드를 사용할 수 있습니다. 구성되지 않음으로 설정하면 기본 앱 설정이 On으로 설정됩니다."
+ },
+ "OrganizeMailByThread": {
+ "title": "스레드별로 메일 구성",
+ "tooltip": "Outlook의 기본 동작은 메일 대화를 스레드된 대화 보기로 묶는 것입니다. 이 설정을 사용하지 않도록 설정하는 경우 Outlook은 각 메일을 개별적으로 표시하며 스레드별로 그룹화하지 않습니다."
+ },
+ "PlayMyEmails": {
+ "title": "내 전자 메일 재생",
+ "tooltip": "[내 전자 메일 재생] 기능은 앱에서 기본적으로 사용하도록 설정되어 있지 않지만 받은 편지함의 배너를 통해 적격 사용자로 기능의 수준이 올라갑니다. 이 기능이 [끄기]로 설정되면 앱에서 적격 사용자로 수준이 올라가지 않습니다. 사용자는 이 기능이 [끄기]로 설정된 경우에도 앱 내에서 [내 전자 메일 재생]을 수동으로 사용하도록 설정할 수 있습니다. [구성되지 않음]으로 설정하는 경우 기본 앱 설정은 [켜기]이며 적격 사용자로 기능의 수준이 올라갑니다."
+ },
+ "SuggestedReplies": {
+ "title": "제안된 회신",
+ "tooltip": "메시지를 여는 경우, Outlook에서 메시지 아래에 회신을 제안할 수 있습니다. 제안된 회신을 선택하면 회신을 보내기 전에 편집할 수 있습니다."
+ },
+ "SyncCalendars": {
+ "title": "일정 동기화",
+ "tooltip": "사용자가 Outlook 일정을 기본 일정 앱 및 데이터베이스와 동기화할 수 있는지 여부를 구성합니다."
+ },
+ "TextPredictions": {
+ "title": "텍스트 예측",
+ "tooltip": "Outlook에서 메시지를 작성할 때 단어와 구를 제안할 수 있습니다. Outlook에서 단어나 구를 제안하는 경우 수락하려면 제안된 단어나 구를 살짝 밉니다. [구성되지 않음]으로 설정하면 기본 앱 설정이 [켜기]로 설정됩니다."
+ },
+ "ThemesEnabled": {
+ "title": "테마 사용",
+ "tooltip": "사용자가 사용자 지정 시각적 개체 테마를 사용할 수 있는지 여부를 지정합니다."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS 디바이스"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "관리자 연락처",
+ "appPackaging": "앱 패키징",
+ "autopatchGroups": "자동 패치 그룹",
+ "devices": "장치",
+ "featureEnablement": "기능 활성화",
+ "feedback": "피드백",
+ "gettingStarted": "시작",
+ "messages": "메시지",
+ "onlineResources": "온라인 리소스",
+ "policyHealth": "정책 상태",
+ "policyHealthPreview": "정책 상태(미리 보기)",
+ "releaseManagement": "릴리스 관리",
+ "serviceRequests": "서비스 요청",
+ "settings": "설정",
+ "supportRequests": "지원 요청",
+ "tenantEnrollment": "테넌트 등록",
+ "tenantManagement": "테넌트 관리"
+ },
+ "actions": "비준수에 대한 작업",
+ "advancedExchangeSettings": "Exchange Online 설정",
+ "advancedThreatProtection": "엔드포인트용 Microsoft Defender",
+ "allApps": "모든 앱",
+ "allDevices": "모든 디바이스",
+ "androidFotaDeployments": "Android FOTA 배포",
+ "appBundles": "앱 번들",
+ "appCategories": "앱 범주",
+ "appConfigPolicies": "앱 구성 정책",
+ "appConfigurationStatus": "앱 구성 상태",
+ "appInstallStatus": "앱 설치 상태",
+ "appLicences": "앱 라이선스",
+ "appProtectionPolicies": "앱 보호 정책",
+ "appProtectionStatus": "앱 보호 상태",
+ "appSelectiveWipe": "앱 선택 초기화",
+ "appleVppTokens": "Apple VPP 토큰",
+ "apps": "앱",
+ "assign": "할당",
+ "assignedPermissions": "할당된 권한",
+ "assignedRoles": "할당된 역할",
+ "autopilotDeploymentReport": "Autopilot 배포(미리 보기)",
+ "autopilotDeploymentReportV2": "Autopilot 배포 2.0(미리 보기)",
+ "brandingAndCustomization": "사용자 지정",
+ "cartProfiles": "카트 프로필",
+ "certificateConnectors": "인증서 커넥터",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "클라우드 연결 디바이스(미리 보기)",
+ "cloudPcActions": "클라우드 PC 작업(미리 보기)",
+ "cloudPcMaintenanceWindows": "클라우드 PC 유지 관리 기간(미리 보기)",
+ "compliancePolicies": "준수 정책",
+ "complianceScriptManagement": "스크립트",
+ "complianceScriptManagementPreview": "스크립트(미리 보기)",
+ "complianceSettings": "준수 정책 설정",
+ "conditionStatements": "조건 문",
+ "conditions": "위치",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "구성 프로필",
+ "configurationScripts": "구성 스크립트",
+ "connectorsAndTokens": "커넥터 및 토큰",
+ "corporateDeviceIdentifiers": "회사 디바이스 식별자",
+ "customAttributes": "사용자 지정 특성",
+ "customAttributesMacOS": "macOS의 사용자 지정 특성",
+ "customNotifications": "사용자 지정 알림",
+ "deploymentSettings": "배포 설정",
+ "derivedCredentials": "파생된 자격 증명",
+ "deviceActions": "디바이스 작업",
+ "deviceCategories": "디바이스 범주",
+ "deviceCleanUp": "디바이스 정리 규칙",
+ "deviceEnrollmentManagers": "디바이스 등록 관리자",
+ "deviceExecutionStatus": "디바이스 상태",
+ "deviceLimitEnrollmentRestrictions": "등록 디바이스 개수 제한",
+ "deviceTypeEnrollmentRestrictions": "등록 디바이스 플랫폼 제한",
+ "devices": "디바이스",
+ "discoveredApps": "검색된 앱",
+ "edgePolicies": "Microsoft Edge 정책",
+ "embeddedSIM": "eSIM 셀룰러 프로필(미리 보기)",
+ "enrollDevices": "디바이스 등록",
+ "enrollmentFailures": "등록 오류",
+ "enrollmentNotifications": "등록 알림(미리 보기)",
+ "enrollmentRestrictions": "등록 제한",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange 서비스 커넥터",
+ "failuresForCumulativeQualityUpdates": "Windows 누적 품질 업데이트 실패",
+ "failuresForDriverUpdates": "Windows 드라이버 업데이트 실패",
+ "failuresForFeatureUpdates": "기능 업데이트 실패",
+ "failuresForQualityUpdates": "Windows 긴급 업데이트 오류",
+ "featureFlighting": "기능 플라이팅",
+ "featureUpdateDeployments": "Windows 10 이상의 기능 업데이트",
+ "flighting": "플라이팅",
+ "fotaUpdate": "펌웨어 무선 업데이트",
+ "groupPolicy": "관리 템플릿",
+ "groupPolicyAnalytics": "그룹 정책 분석",
+ "helpSupport": "도움말 및 지원",
+ "helpSupportReplacement": "도움말 및 지원({0})",
+ "iOSAppProvisioning": "iOS 앱 프로비저닝 프로필",
+ "incompleteUserEnrollments": "사용자 등록 미완료",
+ "iosUpdates": "iOS/iPadOS 업데이트",
+ "legacyPcManagement": "레거시 PC 관리",
+ "macOSSoftwareUpdate": "macOS 업데이트",
+ "macOSSoftwareUpdateAccountSummaries": "macOS 디바이스 설치 상태",
+ "macOSSoftwareUpdateCategorySummaries": "소프트웨어 업데이트 요약",
+ "macOSSoftwareUpdateStateSummaries": "업데이트",
+ "managedGooglePlay": "관리되는 Google Play",
+ "msfb": "비즈니스용 Microsoft 스토어",
+ "myPermissions": "내 권한",
+ "notifications": "알림",
+ "officeApps": "Office 앱",
+ "officeProPlusPolicies": "Office 앱 관련 정책",
+ "onPremise": "온-프레미스",
+ "onPremisesConnector": "Exchange ActiveSync 온-프레미스 커넥터",
+ "onPremisesDeviceAccess": "Exchange ActiveSync 디바이스",
+ "onPremisesManageAccess": "Exchange 온-프레미스 액세스",
+ "outOfDateIosDevices": "iOS 디바이스에 대한 설치 오류",
+ "overview": "개요",
+ "partnerDeviceManagement": "파트너 디바이스 관리",
+ "perUpdateRingDeploymentState": "업데이트 링 배포 상태별",
+ "permissions": "사용 권한",
+ "platformApps": "앱 {0}개",
+ "platformDevices": "디바이스 {0}개",
+ "platformEnrollment": "{0} 등록",
+ "policies": "정책",
+ "profiles": "프로필",
+ "properties": "속성",
+ "reports": "보고서",
+ "retireNoncompliantDevices": "비규격 디바이스 사용 중지",
+ "retireNoncompliantDevicesPreview": "비규격 디바이스 사용 중지(미리 보기)",
+ "role": "역할",
+ "scriptManagement": "스크립트",
+ "securityBaselines": "보안 기준",
+ "serviceToServiceConnector": "Exchange Online 커넥터",
+ "servicenowConnector": "ServiceNow 커넥터",
+ "shellScripts": "셸 스크립트",
+ "teamViewerConnector": "TeamViewer Connector",
+ "telecomeExpenseManagement": "Telecom Expense Management",
+ "tenantAdmin": "테넌트 관리",
+ "tenantAdministration": "테넌트 관리",
+ "termsAndConditions": "사용 약관",
+ "titles": "제목",
+ "troubleshoot": "문제 해결",
+ "troubleshootSupport": "문제 해결 및 지원",
+ "user": "사용자",
+ "userExecutionStatus": "사용자 상태",
+ "wdacSupplementalPolicies": "S 모드 추가 정책",
+ "win32CatalogUpdateApp": "엔터프라이즈 앱 관리 앱 업데이트",
+ "win32CatalogUpdateAppInPreview": "Windows용 업데이트(Win32) 카탈로그 앱(미리 보기)",
+ "win32CatalogUpdateAppPreviewTitle": "업데이트가 포함된 엔터프라이즈 앱 카탈로그 앱(미리 보기)",
+ "win32CatalogUpdateAppTitle": "업데이트가 포함된 엔터프라이즈 앱 카탈로그 앱",
+ "windows10DriverUpdate": "Windows 10 이상용 드라이버 업데이트",
+ "windows10QualityUpdate": "Windows 10 이상의 품질 업데이트",
+ "windows10UpdateRings": "Windows 10 이상용 링 업데이트",
+ "windows10XPolicyFailures": "Windows 10X 정책 실패",
+ "windows365PartnerConnector": "Windows 365 파트너 커넥터",
+ "windowsDiagnosticData": "Windows 데이터",
+ "windowsEnterpriseCertificate": "Windows 엔터프라이즈 인증서",
+ "windowsManagement": "스크립트",
+ "windowsSideLoadingKeys": "Windows 테스트용 로드 키",
+ "windowsSymantecCertificate": "Windows DigiCert 인증서",
+ "windowsThreatReport": "위협 에이전트 상태"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "사용자가 선택한 서비스에서 데이터를 열도록 허용",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "유지할 이전 PIN 값 수 선택"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "모든 준수 정책에는 하나의 차단 작업이 필요합니다.",
- "graceperiod": "일정(비준수 후 기간(일))",
- "graceperiodInfo": "사용자의 디바이스에 대해 이 작업이 트리거되어야 하는 비준수 후 기간(일)을 지정합니다.",
- "subtitle": "작업 매개 변수 지정",
- "title": "작업 매개 변수"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "사용자가 선택적 업데이트로 사용할 수 있도록 설정",
+ "optionalValue": "선택",
+ "required": "사용자가 필수 업데이트로 사용할 수 있도록 설정",
+ "requiredValue": "필수"
},
- "List": {
- "gracePeriodDay": "비준수 후 {0}일",
- "gracePeriodDays": "비준수 후 {0}일",
- "gracePeriodHour": "비준수 후 {0}시간",
- "gracePeriodHours": "비준수 후 {0}시간",
- "gracePeriodMinute": "비준수 후 {0}분",
- "gracePeriodMinutes": "비준수 후 {0}분",
- "immediately": "즉시",
- "schedule": "일정",
- "scheduleInfoBalloon": "비규정 준수 후 기간(일)",
- "subtitle": "비규격 디바이스에 대한 일련의 작업 지정",
- "title": "작업"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise 시스템 앱",
+ "androidForWorkApp": "관리형 Google Play 스토어 앱",
+ "androidLobApp": "Android LOB(기간 업무) 앱",
+ "androidStoreApp": "Android 스토어 앱",
+ "builtInAndroid": "기본 제공 Android 앱",
+ "builtInApp": "기본 제공 앱",
+ "builtInIos": "기본 제공 iOS 앱",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS 웹 클립",
+ "iosLobApp": "iOS LOB(기간 업무) 앱",
+ "iosStoreApp": "iOS 스토어 앱",
+ "iosVppApp": "iOS 대량 구매 프로그램 앱",
+ "lineOfBusinessApp": "LOB(기간 업무) 앱",
+ "macOSDmgApp": "macOS 앱(DMG)",
+ "macOSEdgeApp": "Microsoft Edge(macOS)",
+ "macOSLobApp": "macOS 기간 업무 앱",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP(macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365 앱(macOS)",
+ "macOSPkgApp": "macOS 앱(PKG)",
+ "macOSWebClip": "macOS 웹 클립",
+ "macOsVppApp": "macOS Volume Purchase Program 앱",
+ "managedAndroidLobApp": "관리되는 Android LOB(기간 업무) 앱",
+ "managedAndroidStoreApp": "관리되는 Android 스토어 앱",
+ "managedGooglePlayApp": "관리형 Google Play 스토어 앱",
+ "managedGooglePlayPrivateApp": "관리형 Google Play 프라이빗 앱",
+ "managedGooglePlayWebApp": "관리형 Google Play 웹 링크",
+ "managedIosLobApp": "관리되는 iOS LOB(기간 업무) 앱",
+ "managedIosStoreApp": "관리되는 iOS 스토어 앱",
+ "microsoftStoreForBusinessApp": "비즈니스용 Microsoft 스토어 앱",
+ "microsoftStoreForBusinessReleaseManagedApp": "비즈니스용 Microsoft 스토어",
+ "officeSuiteApp": "Microsoft 365 앱(Windows 10 이상)",
+ "webApp": "웹 링크",
+ "windowsAppXLobApp": "Windows AppX LOB(기간 업무) 앱",
+ "windowsClassicApp": "Windows 앱(Win32)",
+ "windowsEdgeApp": "Microsoft Edge(Windows 10 이상)",
+ "windowsMobileMsiLobApp": "Windows MSI 기간 업무 앱",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX LOB(기간 업무) 앱",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX LOB(기간 업무) 앱",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 스토어 앱",
+ "windowsPhoneXapLobApp": "Windows Phone XAP LOB(기간 업무) 앱",
+ "windowsStoreApp": "Microsoft Store 앱(레거시)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX LOB(기간 업무) 앱",
+ "windowsUniversalLobApp": "Windows 유니버설 사업 부문 앱",
+ "windowsWebApp": "Windows 웹 링크"
+ },
+ "PolicySet": {
+ "appManagement": "애플리케이션 관리",
+ "assignments": "할당",
+ "basics": "기본",
+ "deviceEnrollment": "디바이스 등록",
+ "deviceManagement": "디바이스 관리",
+ "scopeTags": "범위 태그",
+ "appConfigurationTitle": "앱 구성 정책",
+ "appProtectionTitle": "앱 보호 정책",
+ "appTitle": "앱",
+ "iOSAppProvisioningTitle": "iOS 앱 프로비저닝 프로필",
+ "deviceLimitRestrictionTitle": "디바이스 개수 제한",
+ "deviceTypeRestrictionTitle": "디바이스 유형 제한",
+ "enrollmentStatusSettingTitle": "등록 상태 페이지",
+ "windowsAutopilotDeploymentProfileTitle": "Windows Autopilot 배포 프로필",
+ "deviceComplianceTitle": "디바이스 준수 정책",
+ "deviceConfigurationTitle": "디바이스 구성 프로필",
+ "powershellScriptTitle": "Powershell 스크립트"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "앱을 설치하면 디바이스가 강제로 다시 시작될 수 있음",
+ "basedOnReturnCode": "반환 코드에 따라 동작 결정",
+ "force": "Intune에서 강제로 필수 디바이스를 다시 시작함",
+ "suppress": "지정된 작업 없음"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "설치 시간 필요(분)",
+ "maxRunTimeInMinutesToolTip": "시스템에서 설치 프로그램이 완료될 때까지 대기하는 시간(분)입니다. 기본값은 60분입니다."
+ },
+ "RunAsAccountOptions": {
+ "system": "시스템",
+ "user": "사용자"
+ },
+ "availableUninstall": "사용 가능한 제거 허용",
+ "availableUninstallTooltip": "회사 포털에서 사용자에게 이 앱에 대한 제거 옵션을 제공하려면 '예'를 선택하세요. 사용자가 회사 포털에서 앱을 제거하지 못하도록 하려면 '아니요'를 선택합니다.",
+ "bladeTitle": "프로그램",
+ "deviceRestartBehavior": "디바이스 다시 시작 동작",
+ "deviceRestartBehaviorTooltip": "앱을 설치한 후 디바이스 다시 시작 동작을 선택합니다. 반환 코드 구성 설정을 기준으로 디바이스를 다시 시작하려면 '반환 코드에 따라 동작 결정'을 선택합니다. MSI 기반 앱에 대한 앱 설치 중에 디바이스 다시 시작 관련 메시지를 표시하지 않으려면 '특정 작업 없음'을 선택하세요. 다시 시작 관련 메시지 표시 여부와 관계없이 앱 설치를 완료할 수 있도록 하려면 '앱 설치 시 강제로 디바이스 다시 시작'을 선택하세요. 앱을 설치한 후에 항상 디바이스를 다시 시작하려면 'Intune에서 강제로 필수 디바이스를 다시 시작함'을 선택합니다.",
+ "header": "이 앱을 설치 및 제거하기 위한 명령 지정:",
+ "installCommand": "설치 명령",
+ "installCommandMaxLengthErrorMessage": "설치 명령은 허용되는 최대 길이인 1024자를 초과할 수 없습니다.",
+ "installCommandTooltip": "이 앱을 설치하는 데 사용되는 전체 설치 명령줄입니다.",
+ "runAs32Bit": "64비트 클라이언트에서 32비트 프로세스로 설치 및 제거 명령 실행",
+ "runAs32BitTooltip": "64비트 클라이언트에서 32비트 프로세스로 앱을 설치 및 제거하려면 '예'를 선택합니다. 64비트 클라이언트에서 64비트 프로세스로 앱을 설치 및 제거하려면 '아니요'(기본값)를 선택합니다. 32비트 클라이언트에서는 항상 32비트 프로세스가 사용됩니다.",
+ "runAsAccount": "설치 동작",
+ "runAsAccountTooltip": "지원되는 경우 모든 사용자에 대해 이 앱을 설치하려면 '시스템'을 선택합니다. 디바이스에 로그인한 사용자에 대해 이 앱을 설치하려면 '사용자'를 선택합니다. 이중 목적 MSI 앱의 경우 원래 설치 시 디바이스에 적용된 값이 복원될 때까지 변경 내용으로 인해 업데이트 및 제거가 완료되지 않습니다.",
+ "selectorLabel": "프로그램",
+ "uninstallCommand": "제거 명령",
+ "uninstallCommandTooltip": "이 앱을 제거하는 데 사용되는 전체 제거 명령줄입니다."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "기타",
- "additionalRecipients": "추가 받는 사람(메일을 통해)",
- "additionalRecipientsBladeTitle": "추가 받는 사람 선택",
- "emailAddressPrompt": "메일 주소 입력(쉼표로 구분)",
- "invalidEmail": "잘못된 메일 주소",
- "messageTemplate": "메시지 템플릿",
- "noneSelected": "선택된 항목이 없음",
- "notSelected": "선택되지 않음",
- "numSelected": "{0}개 선택됨",
- "selected": "선택됨"
- },
- "block": "디바이스를 비규격으로 표시",
- "lockDevice": "잠금 디바이스(로컬 작업)",
- "lockDeviceWithPasscode": "잠금 디바이스(로컬 작업)",
- "noAction": "작업 없음",
- "noActionRow": "작업이 없습니다. '추가'를 선택하여 작업을 추가하세요.",
- "pushNotification": "최종 사용자에게 푸시 알림 보내기",
- "remoteLock": "원격으로 비규격 디바이스 잠금",
- "removeSourceAccessProfile": "소스 액세스 프로필 제거",
- "retire": "사용 중지 목록에 디바이스 추가",
- "wipe": "초기화",
- "emailNotification": "최종 사용자에게 메일 보내기"
- },
- "InstallIntent": {
- "available": "등록된 디바이스에 사용 가능",
- "availableWithoutEnrollment": "등록 유무에 상관없이 사용 가능",
- "required": "필수",
- "uninstall": "제거"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "사용자 지정 스크립트 만들기",
- "edit": "사용자 지정 스크립트 편집"
- },
- "basicInfo": "작성한 검색 및 재구성 스크립트에서 새 사용자 지정 스크립트 패키지를 만듭니다.",
- "customScriptCapitalized": "사용자 지정 스크립트",
- "customScriptLowercase": "사용자 지정 스크립트",
- "detectionScript": "검색 스크립트"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "PIN에 소문자 사용 허용",
+ "notAllow": "PIN에 소문자 사용 허용 안 함",
+ "requireAtLeastOne": "PIN에 소문자를 하나 이상 사용해야 함"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "PIN에 특수 문자 사용 허용",
+ "notAllow": "PIN에 특수 문자 사용 허용 안 함",
+ "requireAtLeastOne": "PIN에 특수 문자를 하나 이상 사용해야 함"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "PIN에 대문자 사용 허용",
+ "notAllow": "PIN에 대문자 사용 허용 안 함",
+ "requireAtLeastOne": "PIN에 대문자를 하나 이상 사용해야 함"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "새로 만들기",
+ "createNewResourceAccountInfo": "
\r\n등록 중 새 리소스 계정을 만듭니다. 리소스 계정은 리소스 계정 테이블에 바로 추가되지만, 디바이스가 등록되고 Surface Hub 구독이 확인될 때까지 활성화되지 않습니다. 리소스 계정에 대한 자세한 정보
\r\n ",
+ "createNewResourceTitle": "새 리소스 계정 만들기",
+ "deviceNameInvalid": "디바이스 이름 형식이 잘못되었습니다.",
+ "deviceNameRequired": "디바이스 이름이 필요합니다.",
+ "editResourceAccountLabel": "편집",
+ "selectExistingCommandMenu": "기존 선택"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "이름은 15자 이하여야 하며, 문자(a-z, A-Z), 숫자(0-9) 및 하이픈을 포함할 수 있습니다. 이름에 숫자만 사용해서는 안 됩니다. 이름은 공백을 포함할 수 없습니다."
+ },
+ "Header": {
+ "addressableUserName": "친숙한 이름",
+ "azureADDevice": "연결된 Microsoft Entra 디바이스",
+ "batch": "그룹 태그",
+ "dateAssigned": "할당된 날짜",
+ "deviceAccountPwd": "장치 계정 암호",
+ "deviceAccountUpn": "장치 계정",
+ "deviceDisplayName": "디바이스 이름",
+ "deviceFriendlyName": "디바이스 식별 이름",
+ "deviceName": "디바이스 이름",
+ "deviceUseType": "디바이스 사용 유형",
+ "enrollmentState": "등록 상태",
+ "intuneDevice": "연결된 Intune 디바이스",
+ "lastContacted": "마지막 연결",
+ "make": "제조업체",
+ "model": "모델",
+ "profile": "할당된 프로필",
+ "profileStatus": "프로필 상태",
+ "purchaseOrderId": "구매 주문",
+ "resourceAccount": "리소스 계정",
+ "serialNumber": "일련 번호",
+ "userPrincipalName": "사용자"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "식별 이름은 필수 항목입니다.",
+ "pwdRequired": "암호는 필수 항목입니다.",
+ "pwdValidFormat": "암호를 업데이트할 수 없습니다. 새 암호에 제공된 값이 도메인의 길이 또는 복잡성 요구 사항을 충족하지 않습니다.",
+ "upnRequired": "장치 계정은 필수 항목입니다",
+ "upnValidFormat": "값에는 문자(a-z, A-Z), 숫자(0-9) 및 하이픈이 포함될 수 있습니다. 값에는 공백이 포함될 수 없습니다."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "모임 및 프레젠테이션",
+ "teamCollaboration": "팀 협업"
+ },
+ "Devices": {
+ "featureDescription": "Windows Autopilot을 사용하면 사용자의 OOBE(첫 실행 경험)를 사용자 지정할 수 있습니다.",
+ "importErrorStatus": "일부 디바이스를 가져오지 못했습니다. 자세한 내용을 보려면 여기를 클릭하세요.",
+ "importPendingStatus": "가져오기가 진행 중입니다. 경과된 시간: {0}분. 이 프로세스에는 최대 {1}분이 소요될 수 있습니다."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Microsoft Entra 하이브리드 조인됨",
+ "activeDirectoryADLabel": "Autopilot을 사용한 Microsoft Entra 하이브리드 조인",
+ "azureAD": "Microsoft Entra 조인됨",
+ "unknownType": "알 수 없는 유형"
+ },
+ "Filter": {
+ "enrollmentState": "상태",
+ "profile": "프로필 상태"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "사용자 이름은 비워 둘 수 없습니다."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "명명 템플릿을 만들어 등록하는 동안 디바이스에 이름을 추가합니다.",
+ "label": "디바이스 이름 템플릿 적용"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "Microsoft Entra 하이브리드 조인된 형식의 Autopilot 배포 프로필의 경우 디바이스 이름이 도메인 조인 구성에 지정된 설정을 사용하여 지정됩니다."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MyCompany-%RAND:4%",
+ "label": "이름 입력",
+ "noDisallowedChars": "이름에는 영숫자 문자, 하이픈, %SERIAL% 또는 %RAND:x%만 사용해야 합니다.",
+ "serialLength": "%SERIAL%에 7개가 넘는 문자를 사용할 수 없습니다.",
+ "validateLessThan15Chars": "이름은 15자 이하여야 합니다.",
+ "validateNoSpaces": "컴퓨터 이름에는 공백이 포함될 수 없습니다.",
+ "validateNotAllNumbers": "이름에는 문자 및/또는 하이픈도 사용해야 합니다.",
+ "validateNotEmpty": "이름은 비워 둘 수 없습니다.",
+ "validateOnlyOneMacro": "이름에는 %SERIAL% 또는 %RAND:x% 중 하나만 사용해야 합니다."
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "디바이스의 고유 이름을 만듭니다. 이름은 15자 이하여야 하며, 문자(a-z, A-Z), 숫자(0-9) 및 하이픈을 포함할 수 있습니다. 이름에 숫자만 사용해서는 안 됩니다. 이름에 공백을 사용할 수 없습니다. 하드웨어 특정 일련 번호를 추가하려면 %SERIAL% 매크로를 사용합니다. 또는 %RAND:x% 매크로를 사용하여 임의 숫자 문자열을 추가합니다. 여기서 x는 추가할 자릿수와 같습니다."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "디바이스를 등록하고 모든 시스템 컨텍스트 앱 및 설정을 프로비전하기 위해 Windows 키를 5번 눌러 사용자 인증 없이 OOBE를 실행하도록 설정합니다. 사용자가 로그인하면 사용자 컨텍스트 앱 및 설정이 제공됩니다.",
+ "label": "사전 프로비전된 배포 허용"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Autopilot Microsoft Entra 하이브리드 흐름은 OOBE 중에 도메인 컨트롤러 연결을 설정하지 않는 경우에도 계속 진행됩니다.",
+ "label": "AD 연결 확인 건너뛰기"
+ },
+ "accountType": "사용자 계정 유형",
+ "accountTypeInfo": "사용자가 디바이스에서 관리자인지 아니면 표준 사용자인지를 지정합니다. 이 설정은 전역 관리자 또는 회사 관리자 계정에는 적용되지 않습니다. 이러한 계정은 Microsoft Entra ID에서 모든 관리 기능에 액세스할 수 있으므로 표준 사용자일 수 없습니다.",
+ "configOOBEInfo": "
\r\nAutopilot 디바이스의 첫 실행 경험 구성\r\n
",
+ "configureDevice": "배포 모드",
+ "configureDeviceHintForSurfaceHub2": "Autopilot은 Surface Hub 2의 자체 배포 모드만 지원합니다. 이 모드는 등록된 디바이스와 사용자를 연결하지 않으므로 사용자 자격 증명이 필요하지 않습니다.",
+ "configureDeviceHintForWindowsPC": "
\r\n 배포 모드는 디바이스를 프로비전하기 위해 사용자가 자격 증명을 제공해야 하는지를 제어합니다.\r\n
\r\n
\r\n
\r\n 사용자 구동: 디바이스가 디바이스를 등록하는 사용자와 연결되고 디바이스를 프로비전하는 데 사용자 자격 증명이 필요합니다.\r\n
\r\n
\r\n 자체 배포(미리 보기): 디바이스가 디바이스를 등록하는 사용자와 연결되지 않고 디바이스를 프로비전하는 데 사용자 자격 증명이 필요하지 않습니다.\r\n
\r\n
",
+ "createSurfaceHub2Info": "Surface Hub 2 디바이스의 Autopilot 등록 설정을 구성합니다. 기본적으로 Autopilot을 사용하면 OOBE 동안 사용자 인증을 건너뛸 수 있습니다. Surface Hub 2용 Windows Autopilot에 대해 자세히 알아보세요.",
+ "createWindowsPCInfo": "\r\n
\r\n자체 배포 모드에서는 Autopilot 디바이스에 대해 다음 옵션이 자동으로 사용하도록 설정됩니다.\r\n
\r\n
\r\n
\r\n 회사 또는 집 사용 선택 건너뛰기\r\n
\r\n
\r\n OEM 등록 및 OneDrive 구성 건너뛰기\r\n
\r\n
\r\n OOBE에서 사용자 인증 건너뛰기\r\n
\r\n
",
+ "endUserDevice": "사용자 구동",
+ "hideEscapeLink": "계정 변경 옵션 숨기기",
+ "hideEscapeLinkInfo": "회사 로그인 페이지 및 도메인 오류 페이지에서 초기 디바이스 설정 중에 계정을 변경하는 옵션과 다른 계정으로 다시 시작하는 옵션이 각각 나타납니다. 이러한 옵션을 숨기려면 Microsoft Entra ID에서 회사 브랜딩을 구성해야 합니다(Windows 10, 1809 이상, 또는 Windows 11 필요).",
+ "info": "AutoPilot 프로필 설정은 사용자가 Windows를 처음으로 시작할 때 표시되는 첫 실행 경험을 정의합니다. ",
+ "language": "언어(지역)",
+ "languageInfo": "사용할 언어 및 지역을 지정하세요.",
+ "licenseAgreement": "Microsoft 소프트웨어 사용 조건",
+ "licenseAgreementInfo": "사용자에게 EULA를 표시할지 여부를 지정합니다.",
+ "plugAndForgetDevice": "자체 배포",
+ "privacySettingWarning": "Windows 10, 버전 1903 이상, 또는 Windows 11을 실행하는 디바이스의 진단 데이터 수집에 대한 기본값이 변경되었습니다. ",
+ "privacySettings": "개인 정보 설정",
+ "privacySettingsInfo": "사용자에게 개인 정보 설정을 표시할지 여부를 지정합니다.",
+ "showCortanaConfigurationPage": "Cortana 구성",
+ "showCortanaConfigurationPageInfo": "[표시]는 시작하는 동안 Cortana 구성 소개를 활성화합니다.",
+ "skipEULAWarning": "사용 조건 숨기기에 대한 중요 정보",
+ "skipKeyboardSelection": "자동으로 키보드 구성",
+ "skipKeyboardSelectionInfo": "true이면 [언어]가 설정된 경우 키보드 선택 페이지를 건너뜁니다.",
+ "subtitle": "AutoPilot 프로필",
+ "title": "OOBE(첫 실행 경험)",
+ "useOSDefaultLanguage": "운영 체제 기본값",
+ "userSelect": "사용자 선택"
},
+ "Sync": {
+ "lastRequestedLabel": "마지막 동기화 요청",
+ "lastSuccessfulLabel": "마지막으로 성공한 동기화",
+ "syncInProgress": "동기화 진행 중입니다. 잠시 후 다시 확인하세요.",
+ "syncInitiated": "AutoPilot 설정 동기화가 시작되었습니다.",
+ "syncSettingsTitle": "AutoPilot 설정 동기화"
+ },
+ "Title": {
+ "devices": "Windows AutoPilot 디바이스"
+ },
+ "Tooltips": {
+ "addressableUserName": "디바이스를 설치하는 동안 표시되는 인사말 이름입니다.",
+ "azureADDevice": "연결된 디바이스에 대한 디바이스 세부 정보로 이동합니다. 해당 없음은 연결된 디바이스가 없음을 의미합니다.",
+ "batch": "디바이스 그룹을 식별하는 데 사용할 수 있는 문자열 특성입니다. Intune의 그룹 태그 필드는 Microsoft Entra 디바이스에서 OrderID 특성에 매핑됩니다.",
+ "dateAssigned": "디바이스에 프로필이 할당되었을 때의 타임스탬프입니다.",
+ "deviceAccountPwd": "Surface Hub 디바이스에 대한 디바이스 계정 암호입니다. 암호를 입력하는 경우 디바이스 계정과 식별 이름도 입력합니다.",
+ "deviceAccountUpn": "Surface Hub 디바이스에 대한 디바이스 계정 전자 메일입니다. 전자 메일을 입력하는 경우 디바이스 계정 암호와 식별 이름도 입력합니다.",
+ "deviceDisplayName": "디바이스에 고유한 이름을 구성합니다. 이 이름은 Microsoft Entra 하이브리드 조인된 배포에서 무시됩니다. 디바이스 이름은 Microsoft Entra 하이브리드 디바이스에 대한 도메인 조인 프로필에서 계속 제공됩니다.",
+ "deviceFriendlyName": "Surface Hub 디바이스에 대한 디바이스 식별 이름입니다. 식별 이름을 입력하는 경우 디바이스 계정과 디바이스 계정 암호도 입력합니다.",
+ "deviceName": "누군가가 디바이스를 검색하고 연결하려고 할 때 표시되는 이름입니다.",
+ "deviceUseType": " 선택에 따라 디바이스가 설정됩니다. 나중에 언제든지 설정에서 변경할 수 있습니다.\r\n
\r\n
모임과 프레젠테이션의 경우 Windows Hello가 켜지지 않으며 각 세션 후 데이터가 제거됩니다.\r\n
\r\n
팀 협업의 경우 Windows Hello가 켜지며 빠른 로그인을 위해 프로필이 저장됩니다.
\r\n
",
+ "enrollmentState": "디바이스가 등록되었는지를 지정합니다.",
+ "intuneDevice": "연결된 디바이스에 대한 디바이스 세부 정보로 이동합니다. 해당 없음은 연결된 디바이스가 없음을 의미합니다.",
+ "lastContacted": "디바이스에 마지막으로 연결한 때의 타임스탬프입니다.",
+ "make": "선택한 디바이스의 제조업체입니다.",
+ "model": "선택한 디바이스의 모델",
+ "profile": "디바이스에 할당된 프로필의 이름입니다.",
+ "profileStatus": "프로필이 디바이스에 할당되는지를 지정합니다.",
+ "purchaseOrderId": "구매 주문 ID",
+ "resourceAccount": "디바이스의 ID 또는 UPN(사용자 계정 이름)입니다.",
+ "serialNumber": "선택한 디바이스의 일련 번호입니다.",
+ "userPrincipalName": "디바이스를 설치하는 동안 인증을 미리 채우는 사용자입니다."
+ },
+ "allDevices": "모든 장치",
+ "allDevicesAlreadyAssignedError": "Autopilot 프로필이 이미 모든 디바이스에 할당되었습니다.",
+ "assignFailedDescription": "{0}에 대한 할당을 업데이트하지 못했습니다.",
+ "assignFailedTitle": "Autopilot 프로필 할당을 업데이트하지 못했습니다.",
+ "assignSuccessDescription": "{0}에 대한 할당을 업데이트했습니다.",
+ "assignSuccessTitle": "AutoPilot 프로필 할당을 업데이트했습니다.",
+ "assignSufaceHub2ProfileNextStep": "이 배포에 대한 다음 단계",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. 하나 이상의 디바이스 그룹에 이 프로필을 할당합니다.",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. 이 프로필을 배포하는 각 Surface Hub 디바이스에 리소스 계정을 할당합니다.",
+ "assignedDevicesCount": "할당된 디바이스",
+ "assignedDevicesResourceAccountDescription": "
이 프로필을 디바이스에 배포하려면 디바이스에 리소스 계정을 할당해야 합니다. 한 번에 디바이스 하나를 선택하여 기존 리소스 계정을 할당하거나 새 리소스 계정을 만듭니다. 리소스 계정에 대한 자세한 정보
",
+ "assignedDevicesResourceAccountStatusBarMessage": "이 테이블은 이 프로필에 할당된 Surface Hub 2 디바이스만 나열합니다.",
+ "assigningDescription": "{0}에 대한 할당을 업데이트하는 중입니다.",
+ "assigningTitle": "AutoPilot 프로필 할당을 업데이트하는 중입니다.",
+ "autoremediationContext": "이 장치에서 하드웨어 변경이 감지되었습니다. 새 하드웨어를 자동으로 등록하려고 합니다. 이제 아무것도 할 필요가 없습니다. 상태는 다음에 체크 인할 때 결과와 함께 업데이트됩니다. 프로필 다시 설정에 대해 자세히 알아보세요.",
+ "autoremediationTitle": "장치 {0}에 수정이 보류 중입니다.",
+ "cannotDeleteMessage": "이 프로필은 그룹에 할당되어 있습니다. 이 프로필을 삭제하려면 먼저 이 프로필에서 모든 그룹을 할당 해제해야 합니다.",
+ "cannotDeleteTitle": "{0}을(를) 삭제할 수 없습니다.",
+ "createdDateTime": "만든 날짜",
+ "deleteMessage": "이 AutoPilot 프로필을 삭제하면 이 프로필에 할당된 디바이스는 모두 [할당되지 않음]으로 표시됩니다.",
+ "deleteMessageWithPolicySet": "{0}은(는) 하나 이상의 정책 집합에 포함되어 있습니다. {0}을(를) 삭제하면 이러한 정책 집합을 통해 더 이상 할당할 수 없게 됩니다.",
+ "deleteTitle": "이 프로필을 삭제하시겠습니까?",
+ "description": "설명",
+ "deviceType": "디바이스 유형",
+ "deviceUse": "디바이스 사용",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot은 Surface Hub 2 디바이스에 조인된 Microsoft Entra만 지원합니다. 조직에서 디바이스의 AD(Active Directory) 조인 방법을 지정하세요.\r\n
\r\n
\r\n
\r\n Microsoft Entra 조인됨: 온-프레미스 Windows Server Active Directory가 없는 클라우드만\r\n
\r\n 조직에서 디바이스를 AD(Active Directory)에 조인하는 방법을 지정합니다.\r\n
\r\n
\r\n
\r\n Microsoft Entra 조인됨: 온-프레미스 Windows Server Active Directory를 사용하지 않는 클라우드 전용입니다.\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "할당된 디바이스 수를 페치하는 동안 오류가 발생했습니다.",
+ "getAssignmentsError": "Autopilot 프로필 할당을 페치하는 동안 오류가 발생했습니다.",
+ "harvestDeviceId": "모든 대상 디바이스를 Autopilot으로 변환",
+ "harvestDeviceIdDescription": "기본적으로 이 프로필은 Autopilot 서비스에서 동기화된 Autopilot 디바이스에만 적용할 수 있습니다.",
+ "harvestDeviceIdInfo": "\r\n 이미 등록되지 않은 경우 대상이 지정된 모든 디바이스를 Autopilot에 등록하려면 [예]를 선택합니다. 다음번에 등록된 디바이스가 Windows OOBE(첫 실행 경험)를 진행하면 할당된 Autopilot 시나리오가 진행됩니다.\r\n \r\n 특정 Autopilot 시나리오는 최소한의 특정 Windows 빌드가 필요합니다. 시나리오를 진행하려면 디바이스에 필요한 최소한의 빌드가 있는지 확인하세요.\r\n \r\n 이 프로필을 제거해도 Autopilot에서 영향을 받는 디바이스는 제거되지 않습니다. Autopilot에서 디바이스를 제거하려면 Windows Autopilot 디바이스 보기를 사용하세요.\r\n ",
+ "harvestDeviceIdWarning": "Autopilot 디바이스를 변환한 후에는 Autopilot 디바이스 목록에서 삭제를 해야만 되돌릴 수 있습니다.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Windows AutoPilot 배포 프로필을 사용하면 디바이스의 첫 실행 경험을 사용자 지정할 수 있습니다.",
+ "invalidProfileNameMessage": "문자 \"{0}\"은(는) 허용되지 않습니다.",
+ "joinTypeLabel": "Microsoft Entra ID에 다음으로 조인",
+ "lastModifiedDateTime": "마지막으로 수정한 날짜:",
+ "manualRemediationContext": "이 장치에서 하드웨어 변경이 감지되었습니다. 장치를 다시 등록하지 않는 한 다시 설정될 때 Autopilot 프로필을 자동으로 수신하지 않습니다. 프로필 다시 설정에 대해 자세히 알아보세요.",
+ "manualRemediationTitle": "장치 {0}에 주의가 필요합니다",
+ "name": "이름",
+ "noAutopilotProfile": "AutoPilot 프로필 없음",
+ "notEnoughPermissionAssignedError": "이 프로필을 선택한 하나 이상의 그룹에 할당할 권한이 없습니다. 관리자에게 문의하세요.",
+ "profile": "프로필",
+ "resourceAccountStatusBarMessage": "이 프로필이 배포되는 각 Surface Hub 2 디바이스의 리소스 계정이 필요합니다. 자세히 알아보려면 여기를 클릭하세요.",
+ "selectServices": "디바이스가 조인할 디렉터리 서비스 선택",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "배포 모드",
+ "windowsPCCommandMenu": "Windows PC",
+ "directoryServiceLabel": "Microsoft Entra ID에 다음으로 조인"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "관리 디바이스",
+ "devicesWithoutEnrollment": "관리되는 앱"
+ },
+ "AppProtection": {
+ "allAppTypes": "모든 앱 유형을 대상으로 함",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Android 회사 프로필의 앱",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Microsoft Entra 공유 모드가 있는 Android Enterprise 전용 디바이스의 앱",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Android 오픈 소스 프로젝트 사용자 연결 디바이스의 앱",
+ "appsOnAndroidOpenSourceProjectUserless": "Android 오픈 소스 프로젝트 사용자 없는 디바이스의 앱",
+ "appsOnIntuneManagedDevices": "Intune 관리 디바이스의 앱",
+ "appsOnUnmanagedDevices": "관리되지 않는 디바이스의 앱",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "MAC",
+ "notAvailable": "사용할 수 없음",
+ "windows10PlatformLabel": "Windows 10 이상",
+ "withEnrollment": "등록 있음",
+ "withoutEnrollment": "등록 없음"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Project Online 데스크톱 클라이언트",
+ "visioProRetail": "Visio Online 플랜 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "{0} 삭제 실패",
+ "failureCa": "CA 정책에서 참조하므로 {0}을(를) 삭제하지 못했습니다.",
+ "modifying": "{0} 삭제 중",
+ "success": "{0}을(를) 삭제함"
+ },
+ "Notify": {
+ "failure": "{0} 업데이트 실패",
+ "modifying": "{0} 수정",
+ "success": "{0} 업데이트 성공"
+ },
+ "menuLabel": "인증 컨텍스트"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "페더레이션 공급자가 충족하는 인증 방법을 요구하는 방법에 대해 자세히 알아봅니다.",
+ "certificate": "인증서 인증",
+ "infoBubble": "ADFS 등의 페더레이션 공급자가 만족해야 하는 필요한 인증 방법을 지정하세요.",
+ "multifactor": "다단계 인증",
+ "require": "페더레이션된 인증 방법 필요(미리 보기)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "영구 브라우저 세션 정책은 [모든 클라우드 앱]을 선택했을 때만 올바르게 작동합니다. 클라우드 앱 선택 항목을 업데이트하세요."
+ },
+ "Option": {
+ "always": "항상 영구적임",
+ "help": "영구 브라우저 세션을 사용하면 사용자가 브라우저 창을 닫았다가 다시 열어도 로그인 상태가 유지됩니다. \n
\n
이 설정은 \"모든 클라우드 앱\"을 선택했을 때 올바르게 작동합니다.
\n
이는 토큰 수명 또는 로그인 빈도 설정에 영향을 주지 않습니다.
\n
이는 회사 브랜딩에서 \"로그인 상태를 유지하는 옵션 표시\" 정책을 재정의합니다.
\n
\"영구적이지 않음\"은 페더레이션 인증 서비스에서 통과된 모든 영구 SSO 클레임을 재정의합니다.
\n
\"영구적이지 않음\"은 여러 애플리케이션에서 그리고 여러 애플리케이션 간에 모바일 디바이스 및 사용자의 모바일 브라우저에서의 SSO를 금지합니다.
\n",
+ "label": "영구 브라우저 세션",
+ "never": "영구적이지 않음"
+ },
+ "Warning": {
+ "allApps": "영구 브라우저 세션은 [모든 클라우드 앱]을 선택했을 때만 올바르게 작동합니다. 클라우드 앱 선택 항목을 변경하세요. 자세한 내용을 보려면 여기를 클릭하세요."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "시간 또는 일",
+ "value": "빈도"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0}일",
+ "singular": "1일"
+ },
+ "Hour": {
+ "plural": "{0}시간",
+ "singular": "1시간"
+ },
+ "daysOption": "일",
+ "everytime": "매번",
+ "help": "사용자가 리소스에 액세스하려고 할 때 다시 로그인할지를 묻기까지 걸리는 기간입니다. 기본 설정은 90일(롤링 기간)입니다. 즉, 사용자가 머신에서 90일 이상 비활성 상태였다가 리소스에 액세스하려고 처음 시도할 때 사용자에게 다시 인증하라는 메시지가 표시됩니다.",
+ "hoursOption": "시간",
+ "label": "로그인 빈도",
+ "placeholder": "단위 선택 "
+ }
+ },
+ "mainOption": "세션 수명 수정",
+ "mainOptionHelp": "사용자에게 메시지가 표시되는 빈도와 브라우저 세션이 지속될지 여부를 구성합니다. 최신 인증 프로토콜을 지원하지 않는 애플리케이션은 이러한 정책을 준수하지 않을 수 있습니다. 그러한 경우 애플리케이션 개발자에게 문의하세요."
+ },
+ "SingleSelectorActive": {
+ "failed": "이 데이터를 로드할 수 없습니다.",
+ "reattempt": "데이터를 로드합니다. {1} 중 {0}을(를) 다시 시도합니다."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "디렉터리 역할 선택"
+ },
+ "Excluded": {
+ "gridAria": "제외된 사용자 목록"
+ },
+ "Included": {
+ "gridAria": "포함된 사용자 목록"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"디렉터리 역할\"에 사용자 지정 역할이 하나 이상 포함되어 있습니다.",
+ "customRoleSelected": "사용자 지정 역할을 하나 이상 선택함",
+ "failed": "\"{0}\"을(를) 구성해야 합니다.",
+ "roles": "역할을 하나 이상 선택하세요.",
+ "usersGroups": "사용자나 그룹을 하나 이상 선택하세요."
+ },
+ "learnMore": "사용자 및 그룹, 워크로드 ID, 디렉터리 역할 또는 외부 게스트와 같이 정책을 적용할 대상에 따라 액세스를 제어합니다."
+ },
+ "advancedTabText": "고급",
+ "allCloudAppsErrorBox": "\"암호 변경 필요\" 권한을 선택하면 \"모든 클라우드 앱\"을 선택해야 합니다.",
+ "allCloudAppsReauth": "\"매회 로그인 빈도\" 세션 제어 및 \"로그인 위험\" 조건이 선택된 경우 \"모든 클라우드 앱\"을 꼭 선택해야 합니다",
+ "allCloudOrSpecificApps": "\"매번 로그인 빈도\" 세션 컨트롤에는 \"모든 클라우드 앱\" 또는 특별히 지원되는 앱을 선택해야 합니다.",
+ "allDayCheckboxLabel": "하루 종일",
+ "allDevicePlatforms": "모든 디바이스",
+ "allGuestUserInfoContent": "Microsoft Entra B2B 게스트를 포함하지만 SharePoint B2B 게스트는 포함하지 않습니다.",
+ "allGuestUserLabel": "모든 게스트 및 외부 사용자",
+ "allRiskLevelsOption": "모든 위험 수준",
+ "allTrustedLocationLabel": "모든 신뢰된 위치",
+ "allUserGroupSetSelectorLabel": "모든 사용자 및 그룹 선택됨",
+ "allUsersReauth": "\"매번 로그인 빈도\" 세션 제어에서는 \"모든 사용자\"를 선택해야 합니다.",
+ "allUsersString": "모든 사용자",
+ "and": "{0} 및 {1}",
+ "andWithGrouping": "({0}) 및 {1}",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "모든 클라우드 앱",
+ "appContextOptionInfoContent": "요청한 인증 태그",
+ "appContextOptionLabel": "요청한 인증 태그(미리 보기)",
+ "appContextUriPlaceholder": "예: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "앱에서 적용하는 제한에는 클라우드 앱 내에서 추가 관리자 구성이 필요할 수 있습니다. 제한은 새 세션에 대해서만 효과가 적용됩니다.",
+ "appNotSetSeletorLabel": "0개의 클라우드 앱이 선택됨",
+ "appReauthNotSupported": "이 앱은 \"매번 로그인 빈도\" 세션 제어를 지원하지 않습니다.",
+ "applyConditionClientAppInfoBalloonContent": "클라이언트 앱을 구성하여 특정 클라이언트 앱에 정책 적용",
+ "applyConditionDevicePlatformInfoBalloonContent": "디바이스 플랫폼을 구성하여 특정 플랫폼에 정책 적용",
+ "applyConditionDeviceStateInfoBalloonContent": "특정 디바이스 상태에 정책을 적용하도록 디바이스 상태를 구성",
+ "applyConditionLocationInfoBalloonContent": "위치를 구성하여 신뢰할 수 있는/신뢰할 수 없는 위치에 정책 적용",
+ "applyConditionSigninRiskInfoBalloonContent": "로그인 위험을 구성하여 선택된 위험 수준에 정책 적용",
+ "applyConditionUserRiskInfoBalloonContent": "선택한 위험 수준에 정책을 적용하도록 사용자 위험 구성",
+ "applyConditonLabel": "구성",
+ "ariaLabelPolicyDisabled": "정책이 사용하지 않도록 설정되었습니다.",
+ "ariaLabelPolicyEnabled": "정책을 사용함",
+ "ariaLabelPolicyReportOnly": "정책이 보고서 전용 모드임",
+ "blockAccess": "액세스 차단",
+ "builtInDirectoryRoleLabel": "기본 제공 디렉터리 역할",
+ "casCustomControlInfo": "Cloud App Security 포털에서 사용자 지정 정책을 구성해야 합니다. 이 컨트롤은 피처링된 앱에서 즉시 작동하며 모든 앱에서 자체 온보딩이 가능합니다. 두 가지 시나리오에 대해 자세히 알아보려면 여기를 클릭하세요.",
+ "casInfoBubble": "이 제어는 다양한 클라우드 앱에서 작동합니다.",
+ "casPreconfiguredControlInfo": "이 컨트롤은 추천 앱에서 즉시 작동하며 모든 앱에서 자체 온보딩이 가능합니다. 두 가지 시나리오에 대해 자세히 알아보려면 여기를 클릭하세요.",
+ "cert64DownloadCol": "base64 인증서 다운로드",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "인증서 다운로드",
+ "certDurationCol": "만료",
+ "certDurationStartCol": "유효 기간",
+ "certName": "VpnCert",
+ "certainApps": "\"다단계 인증 필요\" 및 \"암호 변경 필요\"가 선택되지 않은 경우 특별히 지원되는 앱만 \"로그인 빈도(항상)\"을 사용할 수 있습니다.",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "애플리케이션 선택",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "애플리케이션을 선택함",
+ "chooseApplicationsEmpty": "애플리케이션 없음",
+ "chooseApplicationsNone": "없음",
+ "chooseApplicationsNoneFound": "\"{0}\"을(를) 찾을 수 없습니다. 다른 이름 또는 ID를 사용해 보세요.",
+ "chooseApplicationsPlural": "{0} 및 {1}개 더",
+ "chooseApplicationsReAuthEverytimeInfo": "앱을 찾고 계신가요? 일부 응용 프로그램은 \"재인증 필요 – 매번\" 세션 컨트롤과 함께 사용할 수 없음",
+ "chooseApplicationsRemove": "제거",
+ "chooseApplicationsReturnedPlural": "{0}개 애플리케이션을 찾음",
+ "chooseApplicationsReturnedSingular": "1개 애플리케이션을 찾음",
+ "chooseApplicationsSearchBalloon": "애플리케이션의 이름 또는 ID를 입력해서 검색합니다.",
+ "chooseApplicationsSearchHint": "애플리케이션 검색...",
+ "chooseApplicationsSearchLabel": "애플리케이션",
+ "chooseApplicationsSearching": "검색 중...",
+ "chooseApplicationsSelect": "선택",
+ "chooseApplicationsSelected": "선택됨",
+ "chooseApplicationsSingular": "{0} 및 1개 더",
+ "chooseApplicationsTooMany": "보다 많은 결과가 표시될 수 있습니다. 검색 상자를 사용해서 필터링하세요.",
+ "chooseLocationCorpnetItem": "기업 네트워크",
+ "chooseLocationSelectedLocationsLabel": "선택한 위치",
+ "chooseLocationTrustedIpsItem": "다단계 인증 신뢰할 수 있는 IP",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "위치 선택",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "선택한 위치",
+ "chooseLocationsEmpty": "위치 없음",
+ "chooseLocationsExcludedSelectorTitle": "선택",
+ "chooseLocationsIncludedSelectorTitle": "선택",
+ "chooseLocationsNone": "없음",
+ "chooseLocationsNoneFound": "\"{0}\"을(를) 찾을 수 없습니다. 다른 이름 또는 ID를 사용해 보세요.",
+ "chooseLocationsPlural": "{0} 및 {1}개 더",
+ "chooseLocationsRemove": "제거",
+ "chooseLocationsReturnedPlural": "위치 {0}개 찾음",
+ "chooseLocationsReturnedSingular": "위치 1개 찾음",
+ "chooseLocationsSearchBalloon": "위치의 이름을 입력하여 검색합니다.",
+ "chooseLocationsSearchHint": "위치를 검색합니다...",
+ "chooseLocationsSearchLabel": "위치",
+ "chooseLocationsSearching": "검색 중...",
+ "chooseLocationsSelect": "선택",
+ "chooseLocationsSelected": "선택됨",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "선택",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "선택",
+ "chooseLocationsSingular": "{0} 및 1개 더",
+ "chooseLocationsTooMany": "보다 많은 결과가 표시될 수 있습니다. 검색 상자를 사용해서 필터링하세요.",
+ "claimProviderAddCommandText": "새 사용자 지정 컨트롤",
+ "claimProviderAddNewBladeTitle": "새 사용자 지정 컨트롤",
+ "claimProviderDeleteCommand": "삭제",
+ "claimProviderDeleteDescription": "\"{0}\"을(를) 삭제하시겠습니까? 이 작업은 실행 취소할 수 없습니다.",
+ "claimProviderDeleteTitle": "계속할까요?",
+ "claimProviderEditInfoText": "클레임 공급자가 제공한 사용자 지정 컨트롤의 JSON을 입력하십시오.",
+ "claimProviderNotificationCreateDescription": "사용자 지정 컨트롤 '{0}'을(를) 만드는 중입니다.",
+ "claimProviderNotificationCreateFailedDescription": "사용자 지정 컨트롤 '{0}'을(를) 만들지 못했습니다. 나중에 다시 시도하십시오.",
+ "claimProviderNotificationCreateFailedTitle": "사용자 지정 컨트롤을 만들지 못했습니다.",
+ "claimProviderNotificationCreateSuccessDescription": "사용자 지정 컨트롤 '{0}'을(를) 만들었습니다.",
+ "claimProviderNotificationCreateSuccessTitle": "{0} 만듦",
+ "claimProviderNotificationCreateTitle": "{0}을(를) 만드는 중",
+ "claimProviderNotificationDeleteDescription": "사용자 지정 컨트롤 '{0}'을(를) 삭제하는 중입니다.",
+ "claimProviderNotificationDeleteFailedDescription": "사용자 지정 컨트롤 '{0}'을(를) 삭제하지 못했습니다. 나중에 다시 시도하십시오.",
+ "claimProviderNotificationDeleteFailedTitle": "사용자 지정 컨트롤을 삭제하지 못했습니다.",
+ "claimProviderNotificationDeleteSuccessDescription": "사용자 지정 컨트롤 '{0}'을(를) 삭제했습니다.",
+ "claimProviderNotificationDeleteSuccessTitle": "'{0}'을(를) 삭제함",
+ "claimProviderNotificationDeleteTitle": "'{0}'을(를) 삭제하는 중",
+ "claimProviderNotificationUpdateDescription": "사용자 지정 컨트롤 '{0}'을(를) 업데이트하는 중입니다.",
+ "claimProviderNotificationUpdateFailedDescription": "사용자 지정 컨트롤 '{0}'을(를) 업데이트하지 못했습니다. 나중에 다시 시도하십시오.",
+ "claimProviderNotificationUpdateFailedTitle": "사용자 지정 컨트롤을 업데이트하지 못했습니다.",
+ "claimProviderNotificationUpdateSuccessDescription": "사용자 지정 컨트롤 '{0}'을(를) 업데이트했습니다.",
+ "claimProviderNotificationUpdateSuccessTitle": "\"{0}\"을(를) 업데이트함",
+ "claimProviderNotificationUpdateTitle": "{0} 업데이트 중",
+ "claimProviderValidationAppIdInvalid": "\"AppId\" 값이 잘못되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationClientIdMissing": "데이터에서 \"ClientId\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationControlClaimsRequestedMissing": "\"Control\"에서 \"ClaimsRequested\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "\"ClaimsRequested\" 항목에서 \"Type\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationControlIdAlreadyExists": "\"Control\" \"Id\" 값이 이미 있습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationControlIdMissing": "\"Control\"에서 \"Id\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "\"Control\" \"Id\" 값이 기존 정책에서 참조되기 때문에 해당 값을 제거할 수 없습니다. 먼저 해당 값을 정책에서 제거하십시오.",
+ "claimProviderValidationControlIdTooManyControls": "\"Control\" 속성에 컨트롤이 너무 많습니다. 검토 후 다시 시도하세요.",
+ "claimProviderValidationControlIdValueReserved": "\"Control\" \"Id\" 값이 예약된 키워드입니다. 다른 ID를 사용하십시오.",
+ "claimProviderValidationControlNameAlreadyExists": "\"Control\" \"Name\" 값이 이미 있습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationControlNameMissing": "\"Control\"에서 \"Name\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationControlsMissing": "데이터에서 \"Controls\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationDiscoveryUrlMissing": "데이터에서 \"DiscoveryUrl\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationInvalid": "제공된 데이터가 잘못되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationInvalidJsonDefinition": "사용자 지정 컨트롤을 저장할 수 없습니다. JSON 텍스트를 검토하고 다시 시도하십시오.",
+ "claimProviderValidationNameAlreadyExists": "\"Name\" 값이 이미 있습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationNameMissing": "데이터에서 \"Name\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
+ "claimProviderValidationUnknown": "제공된 데이터의 유효성을 검사하는 중 알 수 없는 오류가 발생했습니다. 검토하고 다시 시도하십시오.",
+ "claimProvidersNone": "사용자 지정 컨트롤 없음",
+ "claimProvidersSearchPlaceholder": "검색 컨트롤입니다.",
+ "classicPoilcyFilterTitle": "표시",
+ "classicPolicyAllPlatforms": "모든 플랫폼",
+ "classicPolicyClientAppBrowserAndNative": "브라우저, 모바일 앱 및 데스크톱 클라이언트",
+ "classicPolicyCloudAppTitle": "클라우드 애플리케이션",
+ "classicPolicyControlAllow": "허용",
+ "classicPolicyControlBlock": "차단",
+ "classicPolicyControlBlockWhenNotAtWork": "작업 중이 아닐 때 액세스 차단",
+ "classicPolicyControlRequireCompliantDevice": "준수 디바이스 필요",
+ "classicPolicyControlRequireDomainJoinedDevice": "도메인 가입 디바이스 필요",
+ "classicPolicyControlRequireMfa": "다단계 인증 필요",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "회사가 아닐 경우 다단계 인증 필요",
+ "classicPolicyDeleteCommand": "삭제",
+ "classicPolicyDeleteFailTitle": "클래식 정책을 삭제하지 못함",
+ "classicPolicyDeleteInProgressTitle": "클래식 정책을 삭제하는 중",
+ "classicPolicyDeleteSuccessTitle": "클래식 정책이 삭제됨",
+ "classicPolicyDetailBladeTitle": "세부 정보",
+ "classicPolicyDisableCommand": "사용 안 함",
+ "classicPolicyDisableConfirmation": "'{0}'을(를) 사용하지 않도록 설정하시겠습니까? 이 작업은 실행 취소할 수 없습니다.",
+ "classicPolicyDisableFailDescription": "'{0}'을(를) 사용하지 않도록 설정하지 못함",
+ "classicPolicyDisableFailTitle": "클래식 정책을 사용하지 않도록 설정하지 못함",
+ "classicPolicyDisableInProgressDescription": "'{0}'을(를) 사용하지 않도록 설정하는 중",
+ "classicPolicyDisableInProgressTitle": "클래식 정책을 사용하지 않도록 설정하는 중",
+ "classicPolicyDisableSuccessDescription": "'{0}'을(를) 사용하지 않도록 설정함",
+ "classicPolicyDisableSuccessTitle": "클래식 정책 사용 안 함",
+ "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync 지원 플랫폼",
+ "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync 비지원 플랫폼",
+ "classicPolicyExcludedPlatformsTitle": "제외된 디바이스 플랫폼",
+ "classicPolicyFilterAll": "모든 정책",
+ "classicPolicyFilterDisabled": "사용하지 않도록 설정된 정책",
+ "classicPolicyFilterEnabled": "사용하도록 설정된 정책",
+ "classicPolicyIncludeExcludeMembersDescription": "그룹을 제외하여 정책의 단계적 마이그레이션을 수행할 수 있습니다.",
+ "classicPolicyIncludeExcludeMembersTitle": "그룹 포함/제외",
+ "classicPolicyIncludedPlatformsTitle": "포함된 디바이스 플랫폼",
+ "classicPolicyManualMigrationMessage": "이 정책은 수동으로 마이그레이션해야 합니다.",
+ "classicPolicyMigrateCommand": "마이그레이션",
+ "classicPolicyMigrateConfirmation": "'{0}'을(를) 마이그레이션하시겠습니까? 이 정책은 한 번만 마이그레이션할 수 있습니다.",
+ "classicPolicyMigrateFailDescription": "'{0}'을(를) 마이그레이션하지 못함",
+ "classicPolicyMigrateFailTitle": "클래식 정책을 마이그레이션하지 못함",
+ "classicPolicyMigrateInProgressDescription": "'{0}'을(를) 마이그레이션하는 중",
+ "classicPolicyMigrateInProgressTitle": "클래식 정책을 마이그레이션하는 중",
+ "classicPolicyMigrateRecommendText": "권장 사항: 새 Azure Portal 정책을 마이그레이션하십시오.",
+ "classicPolicyMigrateSuccessTitle": "클래식 정책을 마이그레이션함",
+ "classicPolicyMigratedSuccessDescription": "이 클래식 정책은 이제 [정책]에서 관리할 수 있습니다.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "클래식 정책이 {0}개의 새 정책으로 마이그레이션되었습니다. 새 정책은 [정책]에서 관리할 수 있습니다.",
+ "classicPolicyNoEditPermissionMsg": "이 정책을 편집할 수 있는 권한이 없습니다. 전역 관리자 및 보안 관리자만 정책을 편집할 수 있습니다. 자세한 내용을 알아보려면 여기를 클릭하세요.",
+ "classicPolicySaveFailDescription": "'{0}'을(를) 저장하지 못함",
+ "classicPolicySaveFailTitle": "클래식 정책을 저장하지 못함",
+ "classicPolicySaveInProgressDescription": "'{0}'을(를) 저장하는 중",
+ "classicPolicySaveInProgressTitle": "클래식 정책을 저장하는 중",
+ "classicPolicySaveSuccessDescription": "'{0}'을(를) 저장함",
+ "classicPolicySaveSuccessTitle": "클래식 정책이 저장됨",
+ "clientAppBladeLegacyInfoBanner": "레거시 인증이 현재 지원되지 않음",
+ "clientAppBladeLegacyUpsellBanner": "지원되지 않는 클라이언트 앱 차단(미리 보기)",
+ "clientAppBladeTitle": "클라이언트 앱",
+ "clientAppDescription": "이 정책이 적용될 클라이언트 앱 선택",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync는 현재 다른 모든 조건을 지원하지 않습니다.",
+ "clientAppLearnMore": "사용자 액세스를 제어하여 최신 인증을 사용하지 않는 특정 클라이언트 애플리케이션을 대상으로 지정합니다.",
+ "clientAppLegacyHeader": "레거시 인증 클라이언트",
+ "clientAppMobileDesktop": "모바일 앱 및 데스크톱 클라이언트",
+ "clientAppModernHeader": "최신 인증 클라이언트",
+ "clientAppOnlySupportedPlatforms": "지원되는 플랫폼에만 정책 적용",
+ "clientAppSelectSpecificClientApps": "클라이언트 앱 선택",
+ "clientAppWebBrowser": "브라우저",
+ "clientAppsSelectedLabel": "{0}개 포함됨",
+ "clientTypeBrowser": "브라우저",
+ "clientTypeEas": "Exchange ActiveSync 클라이언트",
+ "clientTypeEasInfo": "레거시 인증만 사용하는 Exchange ActiveSync 클라이언트입니다.",
+ "clientTypeModernAuth": "최신 인증 클라이언트",
+ "clientTypeOtherClients": "기타 클라이언트",
+ "clientTypeOtherClientsInfo": "여기에는 이전 버전의 Office 클라이언트와 기타 메일 프로토콜(POP, IMAP, SMTP 등)이 포함됩니다. [자세한 정보][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "이 정책에 구성된 클라우드 앱 {0}개가 디렉터리에서 삭제되었지만 정책에서 다른 앱에 영향을 주지 않습니다. 다음에 정책의 애플리케이션 섹션을 업데이트하면 삭제된 앱이 자동으로 제거됩니다.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "모든 Microsoft 앱",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Microsoft 클라우드, 데스크톱 및 모바일 앱 허용(미리 보기)",
+ "cloudappsSelectionBladeAllCloudapps": "모든 클라우드 앱",
+ "cloudappsSelectionBladeExcludeDescription": "정책에서 제외할 클라우드 앱 선택",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "제외된 클라우드 앱 선택",
+ "cloudappsSelectionBladeIncludeDescription": "이 정책을 적용할 클라우드 앱 선택",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "선택",
+ "cloudappsSelectionBladeSelectedCloudapps": "앱 선택",
+ "cloudappsSelectorInfoBallonText": "사용자가 작업을 수행하기 위해 액세스하는 서비스입니다(예: 'Salesforce').",
+ "cloudappsSelectorPluralExcluded": "제외된 앱 {0}개",
+ "cloudappsSelectorPluralIncluded": "앱 {0}개 포함",
+ "cloudappsSelectorSingularExcluded": "앱 1개 제외됨",
+ "cloudappsSelectorSingularIncluded": "앱 1개 포함",
+ "cloudappsSelectorUserPlural": "앱 {0}개",
+ "cloudappsSelectorUserSingular": "앱 1개",
+ "conditionLabelMulti": "조건 {0}개 선택됨",
+ "conditionLabelOne": "조건 1개 선택됨",
+ "conditionalAccessBladeTitle": "조건부 액세스",
+ "conditionsNotSelectedLabel": "구성하지 못함",
+ "conditionsReqMfaReauthSet": "현재 선택되어 있는 \"다단계 인증 필요\" 및 \"로그인 빈도(항상)\" 세션 제어로 인해 일부 옵션을 사용할 수 없습니다.",
+ "conditionsReqPwSet": "현재 선택된 \"암호 변경 필요\" 권한으로 인해 일부 옵션을 사용할 수 없습니다.",
+ "configureCasText": "Cloud App Security 구성",
+ "configureCustomControlsText": "사용자 지정 정책 구성",
+ "controlLabelMulti": "컨트롤 {0}개 선택됨",
+ "controlLabelOne": "컨트롤 1개 선택됨",
+ "controlValidatorText": "컨트롤을 하나 이상 선택하세요.",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "규격 디바이스를 요구하는 방법에 대해 자세히 알아보세요.",
+ "controlsDeviceComplianceInfoBubble": "디바이스가 Intune을 준수해야 합니다. 디바이스가 Intune을 준수하지 않는 경우 사용자에게 디바이스의 준수를 요구하는 메시지가 표시됩니다.",
+ "controlsDomainJoinedAriaLabel": "Microsoft Entra 하이브리드 조인 디바이스를 요구하는 방법에 대해 자세히 알아보세요.",
+ "controlsDomainJoinedInfoBubble": "디바이스는 Microsoft Entra 하이브리드 조인되어야 합니다.",
+ "controlsMamAriaLabel": "승인된 클라이언트 애플리케이션을 요구하는 방법에 대해 자세히 알아보세요.",
+ "controlsMamInfoBubble": "디바이스가 이러한 승인된 클라이언트 애플리케이션을 사용해야 합니다.",
+ "controlsMfaInfoBubble": "사용자는 전화 통화, 텍스트 등의 추가 보안 요구 사항을 완료해야 합니다.",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "정책으로 보호된 앱 요구 사항에 대해 자세히 알아보세요.",
+ "controlsRequireCompliantAppInfoBubble": "디바이스가 정책으로 보호된 앱을 사용해야 합니다.",
+ "controlsRequirePasswordResetAriaLabel": "암호 변경 요구 사항에 대해 자세히 알아봅니다.",
+ "controlsRequirePasswordResetInfoBubble": "사용자 위험을 낮추기 위해 암호를 변경해야 합니다. 이 옵션을 사용하려면 다단계 인증도 필요합니다. 다른 제어는 사용할 수 없습니다.",
+ "countriesRadiobuttonInfoBalloonContent": "사용자의 IP 주소에 따라 로그인하는 국가/지역입니다.",
+ "createNewVpnCert": "새 인증서",
+ "createdTimeLabel": "만든 시간",
+ "customRoleLabel": "사용자 지정 역할(지원되지 않음)",
+ "dateRangeTypeLabel": "날짜 범위",
+ "daysOfWeekPlaceholderText": "요일 필터링",
+ "daysOfWeekTypeLabel": "요일",
+ "deletePolicyNoLicenseText": "이제 이 정책을 삭제할 수 있습니다. 삭제하는 경우 필요한 라이선스를 얻기 전까지 다시 만들 수 없습니다.",
+ "descriptionContentForControlsAndOr": "여러 컨트롤의 경우",
+ "devicePlatform": "디바이스 플랫폼",
+ "devicePlatformConditionHelpDescription": "선택한 디바이스 플랫폼에 정책을 적용합니다.\n[자세한 정보][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0}개 포함됨",
+ "devicePlatformIncludeExclude": "{0}, {1}개 제외됨",
+ "devicePlatformNoSelectionError": "디바이스 플랫폼을 선택하려면 하위 항목을 하나 선택해야 합니다.",
+ "devicePlatformsNone": "없음",
+ "deviceSelectionBladeExcludeDescription": "정책에서 제외할 플랫폼 선택",
+ "deviceSelectionBladeIncludeDescription": "이 정책에 포함할 디바이스 플랫폼 선택",
+ "deviceStateAll": "모든 디바이스 상태",
+ "deviceStateCompliant": "디바이스가 준수 상태로 표시됨",
+ "deviceStateCompliantInfoContent": "Intune을 준수하는 디바이스는 이 정책의 평가에서 제외됩니다. 즉, 예를 들어 정책이 액세스를 차단하는 경우 Intune을 준수하는 디바이스 외의 모든 디바이스가 차단됩니다.",
+ "deviceStateConditionConfigureInfoContent": "디바이스 상태에 따라 정책 구성",
+ "deviceStateConditionSelectorInfoContent": "사용자가 로그인하는 장치가 'Microsoft Entra 하이브리드 조인'되었거나 '준수 표시'인지 여부입니다.\n 이 항목은 더 이상 사용되지 않습니다. '{1}'을(를) 대신 사용하세요.",
+ "deviceStateConditionSelectorLabel": "디바이스 상태(사용되지 않음)",
+ "deviceStateDomainJoined": "디바이스 Microsoft Entra 하이브리드 조인됨",
+ "deviceStateDomainJoinedInfoContent": "Microsoft Entra 하이브리드 조인된 디바이스는 이 정책의 평가에서 제외되므로, 예를 들어 정책이 액세스를 차단하는 경우 Microsoft Entra 하이브리드 조인 디바이스를 제외한 모든 디바이스를 차단합니다.",
+ "deviceStateDomainJoinedInfoLinkText": "자세히 알아보세요.",
+ "deviceStateExcludeDescription": "정책에서 디바이스를 제외하는 데 사용된 디바이스 상태 조건을 선택합니다.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} 포함 및 {1} 제외",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} 포함 및 {1}, {2} 제외",
+ "directoryRoleInfoContent": "기본 제공 디렉터리 역할에 정책을 할당합니다.",
+ "directoryRolesLabel": "디렉터리 역할",
+ "discardbutton": "취소",
+ "downloadDefaultFileName": "IP 범위",
+ "downloadExampleFileName": "예",
+ "downloadExampleHeader": "수락될 수 있는 데이터의 종류를 보여주는 예제 파일입니다. #로 시작하는 줄은 무시됩니다.",
+ "duplicate": "중복",
+ "duplicatePolicyName": "{0} 복사",
+ "endDatePickerLabel": "끝",
+ "endTimePickerLabel": "종료 시간",
+ "enterCountryText": "IP 주소와 국가/지역은 쌍으로 평가됩니다. 국가를 선택합니다.",
+ "enterIpText": "IP 주소와 국가/지역은 쌍으로 평가됩니다. IP 주소를 입력합니다.",
+ "enterUserText": "사용자를 선택하지 않았습니다. 사용자를 선택하세요.",
+ "evaluationResult": "평가 결과",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "지원되는 플랫폼이 있는 Exchange ActiveSync만",
+ "excludeAllTrustedLocationSelectorText": "모든 신뢰할 수 있는 위치 제외",
+ "featureRequiresP2": "이 기능을 사용하려면 Microsoft Entra ID P2 라이선스가 필요합니다.",
+ "friday": "금요일",
+ "grantControls": "컨트롤 권한 부여",
+ "gridNetworkTrusted": "인증 신뢰",
+ "gridPolicyCreatedDateTime": "만든 날짜",
+ "gridPolicyEnabled": "사용",
+ "gridPolicyModifiedDateTime": "수정한 날짜",
+ "gridPolicyName": "정책 이름",
+ "gridPolicyState": "상태",
+ "groupSelectionBladeExcludeDescription": "정책에서 제외할 그룹 선택",
+ "groupSelectionBladeExcludedSelectorTitle": "제외된 그룹 선택",
+ "groupSelectionBladeSelect": "그룹 선택",
+ "groupSelectorInfoBallonText": "정책이 적용되는 디렉터리의 그룹입니다. 예: '파일럿 그룹'",
+ "groupsSelectionBladeTitle": "그룹",
+ "helpCommonScenariosText": "일반 시나리오에 관심이 있으신가요?",
+ "helpCondition1": "사용자가 한 명이라도 회사 네트워크 외부에 있는 경우",
+ "helpCondition2": "‘Managers’ 그룹의 사용자가 로그인하는 경우",
+ "helpConditionsTitle": "조건",
+ "helpControl1": "다단계 인증을 사용해서 로그인해야 합니다.",
+ "helpControl2": "Intune 준수 디바이스 또는 도메인에 가입된 디바이스를 사용해야 합니다.",
+ "helpControlsTitle": "컨트롤",
+ "helpIntroText": "조건부 액세스를 사용하면 특정 조건이 발생하는 경우 액세스 요구 사항을 적용할 수 있습니다. 몇 가지 예제를 살펴보겠습니다.",
+ "helpIntroTitle": "조건부 액세스란 무엇인가요?",
+ "helpLearnMoreText": "조건부 액세스에 대해 자세히 알고 싶으신가요?",
+ "helpStartStep1": "[+ 새 정책]을 클릭하여 첫 번째 정책 만들기",
+ "helpStartStep2": "정책 조건 및 제어를 지정합니다.",
+ "helpStartStep3": "완료한 후에는 정책을 사용하도록 설정하고 만듭니다.",
+ "helpStartTitle": "시작",
+ "highRisk": "높음",
+ "includeAndExcludeAppsTextFormat": "포함: {0}. 제외: {1}.",
+ "includeAppsTextFormat": "포함: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "알 수 없는 영역은 국가/지역으로 매핑할 수 없는 IP 주소입니다.",
+ "includeUnknownAreasCheckboxLabel": "알 수 없는 영역 포함",
+ "infoCommandLabel": "정보",
+ "invalidCertDuration": "잘못된 인증서 기간",
+ "invalidIpAddress": "값이 올바른 IP 주소여야 합니다.",
+ "invalidReAuthSignInRiskOptionSelected": "\"매번 로그인 빈도\" 세션 제어는 \"로그인 위험\" 조건 제어에서 \"위험 없음\" 선택을 허용하지 않습니다.",
+ "invalidUriErrorMsg": "유효한 URI를 입력하세요(예: 'uri:contoso.com:acr'). ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "전체 로드",
+ "loading": "로딩 중...",
+ "locationConfigureNamedLocationsText": "신뢰된 모든 위치를 구성",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "위치 이름이 너무 깁니다. 최대 길이는 256자입니다.",
+ "locationSelectionBladeExcludeDescription": "정책에서 제외할 위치 선택",
+ "locationSelectionBladeIncludeDescription": "이 정책에 포함할 위치 선택",
+ "locationsAllLocationsLabel": "임의의 위치",
+ "locationsAllNamedLocationsLabel": "신뢰할 수 있는 모든 IP",
+ "locationsAllPrivateLinksLabel": "내 테넌트의 모든 사설 링크",
+ "locationsIncludeExcludeLabel": "{0}, 모든 신뢰할 수 있는 IP 제외",
+ "locationsSelectedPrivateLinksLabel": "선택한 사설 링크",
+ "lowRisk": "낮음",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "조건부 액세스 정책을 관리하려면 조직에 Microsoft Entra ID P1 또는 P2가 필요합니다.",
+ "manageSecurityDefaultsAriaLabel": "보안 기본 설정을 관리합니다.",
+ "markAsTrustedCheckboxInfoBalloonContent": "신뢰할 수 있는 위치에서 로그인하면 사용자의 로그인 위험이 낮아집니다. 입력한 IP 범위가 조직에 설정되어 신뢰할 수 있는 경우 이 위치만 신뢰할 수 있음으로 표시하세요.",
+ "markAsTrustedCheckboxLabel": "신뢰할 수 있는 위치로 표시",
+ "mediumRisk": "보통",
+ "memberSelectionCommandRemove": "제거",
+ "menuItemClaimProviderControls": "사용자 지정 제어(미리 보기)",
+ "menuItemClassicPolicies": "클래식 정책",
+ "menuItemInsightsAndReporting": "인사이트 및 보고",
+ "menuItemManage": "관리",
+ "menuItemNamedLocationsPreview": "명명된 위치(미리 보기)",
+ "menuItemNamedNetworks": "명명된 위치",
+ "menuItemPolicies": "정책",
+ "menuItemTermsOfUse": "사용 약관",
+ "modifiedTimeLabel": "수정한 시간",
+ "monday": "월요일",
+ "nameLabel": "이름",
+ "namedLocationCountryInfoBanner": "IPv4 주소만 국가/지역에 매핑됩니다. IPv6 주소는 알 수 없는 국가/지역에 포함되어 있습니다.",
+ "namedLocationTypeCountry": "국가/지역",
+ "namedLocationTypeLabel": "사용 위치 정의:",
+ "namedLocationUpsellBanner": "이 보기는 더 이상 사용되지 않습니다. 새롭게 개선된 '명명된 위치' 보기로 이동합니다.",
+ "namedLocationsHelpDescription": "명명된 위치는 가양성 및 Microsoft Entra ID 조건부 액세스 정책을 줄이기 위해 Microsoft Entra 보안 보고서에서 사용됩니다.\n[자세한 정보][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "새 IP 범위(예: 40.77.182.32/27) 추가",
+ "namedNetworkCountryNeeded": "국가/지역을 하나 이상 선택해야 합니다.",
+ "namedNetworkDeleteCommand": "삭제",
+ "namedNetworkDeleteDescription": "\"{0}\"을(를) 삭제하시겠습니까? 이 작업은 실행 취소할 수 없습니다.",
+ "namedNetworkDeleteTitle": "계속할까요?",
+ "namedNetworkDownloadIpRange": "다운로드",
+ "namedNetworkInvalidRange": "값은 올바른 IP 범위여야 합니다.",
+ "namedNetworkIpRangeNeeded": "하나 이상의 유효한 IP 범위가 필요합니다.",
+ "namedNetworkIpRangesDescriptionContent": "조직의 IP 범위 구성",
+ "namedNetworkIpRangesTab": "IP 범위",
+ "namedNetworkListAdd": "새 위치",
+ "namedNetworkListConfigureTrustedIps": "다단계 인증 신뢰할 수 있는 IP 구성",
+ "namedNetworkNameDescription": "예: 'Redmond 사무실'",
+ "namedNetworkNameInvalid": "제공된 이름이 잘못되었습니다.",
+ "namedNetworkNameRequired": "이 위치에 대한 이름을 제공해야 합니다.",
+ "namedNetworkNoIpRanges": "IP 범위 없음",
+ "namedNetworkNotificationCreateDescription": "이름이 '{0}'인 위치를 만드는 중",
+ "namedNetworkNotificationCreateFailedDescription": "'{0}' 위치를 만들지 못했습니다. 나중에 다시 시도하세요.",
+ "namedNetworkNotificationCreateFailedTitle": "위치를 만들지 못함",
+ "namedNetworkNotificationCreateSuccessDescription": "이름이 '{0}'인 위치를 만듦",
+ "namedNetworkNotificationCreateSuccessTitle": "{0} 만듦",
+ "namedNetworkNotificationCreateTitle": "{0}을(를) 만드는 중",
+ "namedNetworkNotificationDeleteDescription": "이름이 '{0}'인 위치를 삭제하는 중",
+ "namedNetworkNotificationDeleteFailedDescription": "'{0}' 위치를 삭제하지 못했습니다. 나중에 다시 시도하세요.",
+ "namedNetworkNotificationDeleteFailedTitle": "위치를 삭제하지 못함",
+ "namedNetworkNotificationDeleteSuccessDescription": "이름이 '{0}'인 위치를 삭제함",
+ "namedNetworkNotificationDeleteSuccessTitle": "'{0}'을(를) 삭제함",
+ "namedNetworkNotificationDeleteTitle": "'{0}'을(를) 삭제하는 중",
+ "namedNetworkNotificationUpdateDescription": "이름이 '{0}'인 위치를 업데이트 중",
+ "namedNetworkNotificationUpdateFailedDescription": "'{0}' 위치를 업데이트하지 못했습니다. 나중에 다시 시도하세요.",
+ "namedNetworkNotificationUpdateFailedTitle": "위치를 업데이트하지 못함",
+ "namedNetworkNotificationUpdateSuccessDescription": "이름이 '{0}'인 위치를 업데이트함",
+ "namedNetworkNotificationUpdateSuccessTitle": "\"{0}\"을(를) 업데이트함",
+ "namedNetworkNotificationUpdateTitle": "{0} 업데이트 중",
+ "namedNetworkSearchPlaceholder": "위치를 검색합니다.",
+ "namedNetworkUploadFailedDescription": "제공된 파일을 구문 분석하는 데 오류가 발생했습니다. 각 줄이 CIDR 형식으로 된 일반 텍스트 파일을 업로드했는지 확인하세요.",
+ "namedNetworkUploadFailedTitle": "'{0}'을(를) 구문 분석하지 못했습니다.",
+ "namedNetworkUploadInProgressDescription": "'{0}'의 CIDR 값을 구문 분석하려고 시도하는 중입니다.",
+ "namedNetworkUploadInProgressTitle": "'{0}' 구문 분석 중",
+ "namedNetworkUploadInvalidDescription": "'{0}'이(가) 너무 크거나 잘못된 형식입니다.",
+ "namedNetworkUploadInvalidTitle": "'{0}'이(가) 잘못됨",
+ "namedNetworkUploadIpRange": "업로드",
+ "namedNetworkUploadSuccessDescription": "{0}줄을 분석했습니다. {1}의 형식이 잘못되었습니다. {2}줄을 건너뛰었습니다.",
+ "namedNetworkUploadSuccessTitle": "'{0}' 구문 분석을 마침",
+ "namedNetworksAdd": "새 명명된 위치",
+ "namedNetworksConditionHelpDescription": "물리적 위치에 따라 사용자 액세스를 제어합니다.\n[자세한 정보][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0}, {1}개 제외됨",
+ "namedNetworksHelpDescription": "명명된 위치는 가양성 및 Microsoft Entra ID 조건부 액세스 정책을 줄이기 위해 Microsoft Entra 보안 보고서에서 사용됩니다.\n[자세한 정보][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0}개 포함됨",
+ "namedNetworksNone": "명명된 위치를 찾을 수 없습니다.",
+ "namedNetworksTitle": "위치 구성",
+ "namednetworkExceedingSizeErrorBladeTitle": "오류 정보",
+ "namednetworkExceedingSizeErrorDetailText": "자세한 내용을 보려면 여기를 클릭하세요.",
+ "namednetworkExceedingSizeErrorMessage": "명명된 위치에 허용되는 최대 스토리지 수를 초과했습니다. 더 짧은 목록으로 다시 시도하세요. 자세한 내용을 보려면 여기를 클릭하세요.",
+ "needMfaSecondary": "\"2차 인증 방법만\"에서 \"로그인 빈도(항상)\"를 선택한 경우 \"다단계 인증 필요\"를 선택해야 합니다.",
+ "needMfaSpecificApps": "특별히 지원되는 앱을 선택하는 경우 “매번 로그인 빈도” 세션 제어에 “다단계 인증 필수” 권한 부여 제어가 필요합니다.",
+ "newCertName": "새 인증서",
+ "noAttributePermissionsError": "정책을 생성하거나 업데이트할 권한이 없습니다. 동적 필터를 추가/편집하려면 속성 정의 리더 역할이 필요합니다.",
+ "noPolicyRowMessage": "정책 없음",
+ "noSPSelected": "선택된 서비스 사용자가 없습니다.",
+ "noUpdatePermissionMessage": "이러한 설정을 업데이트할 수 있는 권한이 없습니다. 액세스 권한을 얻으려면 전역 관리자에게 문의하세요.",
+ "noUserSelected": "사용자 선택 안 됨",
+ "noneRisk": "위험 없음",
+ "office365Description": "이러한 앱에는 Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer 등이 포함됩니다.",
+ "office365InfoBox": "선택한 앱 중 하나 이상이 Office 365에 속해 있습니다. 대신 Office 365 앱에서 이 정책을 설정하는 것이 좋습니다.",
+ "oneUserSelected": "사용자가 한 명 선택됨",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "전역 관리자만 이 정책을 저장할 수 있습니다.",
+ "or": "{0} 또는 {1}",
+ "pickerDoneCommand": "완료",
+ "policiesBladeAdPremiumUpsellBannerText": "Microsoft Entra ID Premium을 통해 클라우드 앱, 로그인 위험 및 장치 플랫폼과 같은 대상별 조건과 사용자 고유의 정책을 만듭니다.",
+ "policiesBladeTitle": "정책",
+ "policiesBladeTitleWithAppName": "정책: {0}",
+ "policiesDisabledBannerText": "연결된 로그온 특성이 있는 애플리케이션의 정책 만들기와 편집은 금지됩니다.",
+ "policiesHitMaxLimitStatusBarMessage": "이 테넌트에 대한 최대 정책 수에 도달했습니다. 추가 생성하기 전에 일부 정책을 삭제하세요.",
+ "policyAssignmentsSection": "할당",
+ "policyBlockAllInfoBox": "구성된 정책은 모든 사용자를 차단하므로 지원되지 않습니다. 할당 및 컨트롤을 검토합니다. 이 정책을 저장하려면 현재 사용자 {0}을(를) 제외합니다.",
+ "policyCloudAppsDisplayTextAllApp": "모든 앱",
+ "policyCloudAppsLabel": "클라우드 앱",
+ "policyConditionClientAppDescription": "사용자가 클라우드 앱에 액세스하는 데 사용하는 소프트웨어입니다(예: '브라우저').",
+ "policyConditionClientAppV2Description": "사용자가 클라우드 앱에 액세스하는 데 사용하는 소프트웨어입니다(예: '브라우저').",
+ "policyConditionDevicePlatform": "디바이스 플랫폼",
+ "policyConditionDevicePlatformDescription": "사용자가 로그인하는 플랫폼입니다(예: 'iOS').",
+ "policyConditionLocation": "위치",
+ "policyConditionLocationDescription": "사용자가 로그인하는 위치(IP 주소 범위를 사용하여 확인)입니다.",
+ "policyConditionLocationPreview": "위치(미리 보기)",
+ "policyConditionSigninRisk": "로그인 위험",
+ "policyConditionSigninRiskDescription": "사용자 이외의 누군가가 로그인했을 가능성입니다. 위험 수준은 높음, 중간 또는 낮음이 될 수 있습니다. Microsoft Entra ID P2 라이선스가 필요합니다.",
+ "policyConditionUserRisk": "사용자 위험",
+ "policyConditionUserRiskDescription": "정책을 적용하기 위해 필요한 사용자 위험 수준 구성",
+ "policyConditioniClientApp": "클라이언트 앱",
+ "policyControlAllowAccessDisplayedName": "액세스 허용",
+ "policyControlAuthenticationStrengthDisplayedName": "인증 강도 필요(미리 보기)",
+ "policyControlBladeTitle": "허용",
+ "policyControlBlockAccessDisplayedName": "액세스 차단",
+ "policyControlCompliantDeviceDisplayedName": "준수 상태로 표시된 디바이스 필요",
+ "policyControlContentDescription": "액세스를 차단하거나 부여하기 위해 액세스 시행을 제어합니다.",
+ "policyControlInfoBallonText": "액세스를 차단하거나, 액세스를 허용하기 위해 충족해야 하는 추가 요구 사항 선택",
+ "policyControlMfaChallengeDisplayedName": "다단계 인증 필요",
+ "policyControlRequireCompliantAppDisplayedName": "앱 보호 정책 필요",
+ "policyControlRequireDomainJoinedDisplayedName": "Microsoft Entra 하이브리드 조인 디바이스 필요",
+ "policyControlRequireMamDisplayedName": "승인된 클라이언트 앱 필요",
+ "policyControlRequiredPasswordChangeDisplayedName": "암호 변경 필요",
+ "policyControlSelectAuthStrength": "인증 강도 필요",
+ "policyControlsNoControlsSelected": "컨트롤 0개 선택됨",
+ "policyControlsSection": "액세스 제어",
+ "policyCreatBladeTitle": "새로 만들기",
+ "policyCreateButton": "만들기",
+ "policyCreateFailedMessage": "오류: {0}",
+ "policyCreateFailedTitle": "'{0}'을(를) 만들지 못함",
+ "policyCreateInProgressTitle": "{0}을(를) 만드는 중",
+ "policyCreateSuccessMessage": "'{0}'을(를) 만들었습니다. [정책을 사용하도록 설정]이 [켜기]로 설정되어 있으면 몇 분 후에 정책을 사용할 수 있습니다.",
+ "policyCreateSuccessTitle": "'{0}'을(를) 만듦",
+ "policyDeleteConfirmation": "\"{0}\"을(를) 삭제하시겠습니까? 이 작업은 실행 취소할 수 없습니다.",
+ "policyDeleteFailTitle": "'{0}'을(를) 삭제하지 못함",
+ "policyDeleteInProgressTitle": "'{0}'을(를) 삭제하는 중",
+ "policyDeleteSuccessTitle": "'{0}'을(를) 삭제함",
+ "policyEnforceLabel": "정책 사용",
+ "policyErrorCannotSetSigninRisk": "로그인 위험 조건을 포함하는 정책을 저장할 권한이 없습니다.",
+ "policyErrorNoPermission": "정책을 저장할 권한이 없습니다. 전역 관리자에게 문의하세요.",
+ "policyErrorUnknown": "오류가 발생했습니다. 나중에 다시 시도하세요.",
+ "policyFallbackWarningMessage": "MS Graph를 사용하여 '{0}'을(를) 만들거나 업데이트하지 못하여 AD Graph로 대체됩니다. 호환되지 않는 조건으로 MS Graph에 대한 정책 엔드포인트를 호출할 때 버그가 있을 가능성이 높으므로 다음 시나리오를 확인하세요.",
+ "policyFallbackWarningTitle": "'{0}'을(를) 만들거나 업데이트하는 데 부분적으로 성공했습니다.",
+ "policyNameCannotBeEmpty": "정책 이름은 비워 둘 수 없습니다.",
+ "policyNameDevice": "디바이스 정책",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "모바일 앱 관리 정책",
+ "policyNameMfaLocation": "다단계 인증 및 위치 정책",
+ "policyNamePlaceholderText": "예: '디바이스 준수 앱 정책'",
+ "policyNameTooLongError": "정책 이름이 너무 깁니다. 최대 256자 사용",
+ "policyOff": "끄기",
+ "policyOn": "설정",
+ "policyReportOnly": "보고서 전용",
+ "policyReviewSection": "검토",
+ "policySaveButton": "저장",
+ "policyStatusIconDescription": "정책을 사용함",
+ "policyStatusIconEnabled": "상태 아이콘을 사용함",
+ "policyTemplateName1": "{0} 브라우저 액세스에 대해 앱 적용 제한 사용",
+ "policyTemplateName2": "관리되는 디바이스에서만 {0} 액세스 허용",
+ "policyTemplateName3": "지속적인 액세스 평가 설정에서 마이그레이션된 정책",
+ "policyTriggerRiskSpecific": "특정 위험 수준 선택",
+ "policyTriggersInfoBalloonText": "정책을 적용할 때를 정의하는 조건입니다(예: '위치').",
+ "policyTriggersNoConditionsSelected": "조건 0개 선택됨",
+ "policyTriggersSelectorLabel": "조건",
+ "policyUpdateFailedMessage": "오류: {0}",
+ "policyUpdateFailedTitle": "{0} 업데이트 실패",
+ "policyUpdateInProgressTitle": "{0} 업데이트 중",
+ "policyUpdateSuccessMessage": "{0}을(를) 업데이트했습니다. [정책 사용]이 [켜기]로 설정되어 있으면 몇 분 후에 정책이 활성화됩니다.",
+ "policyUpdateSuccessTitle": "{0} 업데이트 성공",
+ "primaryCol": "주",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "보고서 전용 모드: 정책은 로그인할 때 평가 및 기록되지만 사용자에게 영향을 주지 않습니다.",
+ "requireAllControlsText": "선택된 컨트롤이 모두 필요함",
+ "requireCompliantDevice": "준수 디바이스 필요",
+ "requireDomainJoined": "도메인에 가입된 디바이스 필요",
+ "requireGrantReauth": "\"모든 클라우드 앱\"이 선택된 경우 \"로그인 빈도(항상)\" 세션 제어에는 \"다단계 인증 필요\" 또는 \"암호 변경 필요\" 제어가 필요합니다.",
+ "requireMFA": "다단계 인증 필요",
+ "requireMfaReauth": "\"로그인 빈도(항상)\" 세션 제어에는 \"로그인 위험\"에 대한 \"다단계 인증 필요\" 제어가 필요합니다.",
+ "requireOneControlText": "선택된 컨트롤 중 하나 필요",
+ "requirePasswordChangeReauth": "\"매번 로그인 빈도\" 세션 컨트롤에는 \"사용자 위험\"에 대한 \"암호 변경 필요\" 권한 부여 컨트롤이 필요합니다.",
+ "requireRiskReauth": "\"모든 클라우드 앱\"이 선택된 경우 \"매번 로그인 빈도\" 세션 컨트롤에는 \"사용자 위험\" 또는 \"로그인 위험\" 세션 컨트롤이 필요합니다.",
+ "requireRiskReauthRiskNotEnabled": "\"모든 클라우드 앱\"이 선택된 경우 \"매번 로그인 빈도\" 세션 컨트롤을 사용할 수 없습니다.",
+ "requireRiskReauthSignInOnly": "\"모든 클라우드 앱\"이 선택된 경우 \"매번 로그인 빈도\" 세션 컨트롤에는 \"로그인 위험\" 세션 컨트롤이 필요합니다.",
+ "requireRiskReauthUserOnly": "\"모든 클라우드 앱\"이 선택된 경우 \"매번 로그인 빈도\" 세션 컨트롤에는 \"사용자 위험\" 세션 컨트롤이 필요합니다.",
+ "resetFilters": "필터 재설정",
+ "sPRequired": "서비스 사용자 필요",
+ "sPSelectorInfoBalloon": "테스트하려는 사용자 또는 서비스 사용자",
+ "saturday": "토요일",
+ "searchTextTooLongError": "검색 텍스트가 너무 깁니다. 최대 256자",
+ "securityDefaultsPolicyName": "보안 기본값",
+ "securityDefaultsTextMessage": "조건부 액세스 정책을 사용하도록 설정하려면 보안 기본값을 비활성화해야 합니다.",
+ "securityDefaultsUpdateInProgressText": "보안 기본 업데이트가 진행 중입니다. 잠시 기다렸다가 다시 시도하세요.",
+ "securityDefaultsWarningMessage": "조직의 보안 구성을 관리하려는 것 같습니다. 조건부 액세스 정책을 사용하도록 설정하기 전에 먼저 {0}보안 기본값을 사용하지 않도록 설정{1}해야 합니다.",
+ "selectDevicePlatforms": "디바이스 플랫폼 선택",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "검색 위치",
+ "selectedSP": "선택된 서비스 사용자",
+ "servicePrincipalBladeExcludedSelectorTitle": "제외된 서비스 주체 선택",
+ "servicePrincipalBladeIncludedSelectorTitle": "서비스 사용자 선택",
+ "servicePrincipalDataGridAria": "사용 가능한 서비스 사용자 목록",
+ "servicePrincipalDropDownLabel": "이 정책은 어떤 항목에 적용됩니까?",
+ "servicePrincipalInfoBox": "정책 할당에서 '{0}' 선택으로 인해 일부 조건을 사용할 수 없습니다.",
+ "servicePrincipalRadioAll": "소유한 모든 서비스 사용자",
+ "servicePrincipalRadioSelect": "서비스 사용자 선택",
+ "servicePrincipalSelectionsAria": "선택한 서비스 사용자 표",
+ "servicePrincipalSelectorAria": "선택한 서비스 사용자 목록",
+ "servicePrincipalSelectorMultiple": "{0} 서비스 사용자가 선택됨",
+ "servicePrincipalSelectorSingle": "서비스 사용자 1명 선택됨",
+ "servicePrincipalSpecificExc": "특정 서비스 주체 제외",
+ "servicePrincipalSpecificInc": "특정 서비스 사용자 포함됨",
+ "servicePrincipals": "서비스 원칙",
+ "sessionControlBladeTitle": "세션",
+ "sessionControlDescriptionContent": "세션 컨트롤을 기반으로 액세스를 제어하여 특정 클라우드 애플리케이션 내에서 제한된 환경을 사용하도록 설정합니다.",
+ "sessionControlDisableInfo": "이 컨트롤은 지원되는 앱에서만 작동합니다. 현재 앱 적용 제한을 지원하는 클라우드 앱은 Office 365, Exchange Online 및 SharePoint Online뿐입니다. 자세히 알아보려면 여기를 클릭하세요.",
+ "sessionControlInfoBallonText": "세션 컨트롤은 클라우드 앱 내에서 제한된 환경을 사용하도록 설정합니다.",
+ "sessionControls": "세션 컨트롤",
+ "sessionControlsAppEnforcedLabel": "앱 적용 제한 사용",
+ "sessionControlsCasLabel": "조건부 액세스 앱 제어 사용",
+ "sessionControlsSecureSignInLabel": "토큰 바인딩 필요",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0}개 포함됨",
+ "signinRiskReauth": "\"다단계 인증 필요\" 및 \"로그인 빈도(항상)\" 세션 제어를 선택한 경우 \"로그인 위험\" 조건을 선택해야 합니다.",
+ "signinRiskTriggerDescriptionContent": "로그인 위험 수준 선택",
+ "singleTenantServicePrincipalInfoBallonText": "정책은 조직이 소유한 단일 테넌트 서비스 사용자에만 적용됩니다. 자세히 알아보려면 여기를 클릭하세요. ",
+ "specificSigninRiskLevelsOption": "특정 로그인 위험 수준 선택",
+ "specificUsersExcluded": "특정 사용자가 제외됨",
+ "specificUsersIncluded": "특정 사용자가 포함됨",
+ "specificUsersIncludedAndExcluded": "특정 사용자 제외 및 포함",
+ "startDatePickerLabel": "시작",
+ "startFreeTrial": "평가판 시작",
+ "startTimePickerLabel": "시작 시간",
+ "sunday": "일요일",
+ "testButton": "What If",
+ "thumbprintCol": "지문",
+ "thursday": "목요일",
+ "timeConditionAllTimesLabel": "항상",
+ "timeConditionIntroText": "이 정책이 적용될 시간 구성",
+ "timeConditionSelectorInfoBallonContent": "사용자가 로그인하는 시간입니다. 예: \"수요일, 오전 9시 - 오후 5시 PST\"",
+ "timeConditionSelectorLabel": "시간(미리 보기)",
+ "timeConditionSpecificLabel": "특정 시간(미리 보기)",
+ "timeSelectorAllTimesText": "항상",
+ "timeSelectorSpecificTimesText": "구성한 특정 시간",
+ "timeZoneDropdownInfoBalloonContent": "시간 범위를 정의한 표준 시간대를 선택하세요. 이 정책은 모든 표준 시간대의 사용자에게 적용됩니다. 예를 들어 한 사용자의 '수요일, 오전 9시 - 오후 5시'는 다른 표준 시간대 사용자의 경우 '수요일, 오전 10시 - 오후 6시'가 됩니다.",
+ "timeZoneDropdownLabel": "표준 시간대",
+ "timeZoneDropdownPlaceholderText": "표준 시간대 선택",
+ "tooManyPoliciesDescription": "지금은 처음 50개 정책만 표시됩니다. 모든 정책을 보려면 여기를 클릭하세요.",
+ "tooManyPoliciesTitle": "50개가 넘는 정책이 있음",
+ "trustedLocationStatusIconDescription": "위치를 신뢰할 수 있음",
+ "trustedLocationStatusIconEnabled": "신뢰할 수 있는 상태 아이콘",
+ "tuesday": "화요일",
+ "uploadInBadState": "지정된 파일을 업로드할 수 없습니다.",
+ "upsellAppsDescription": "중요한 애플리케이션에 대해 항상 또는 회사 네트워크 외부인 경우에만 다단계 인증을 요구합니다.",
+ "upsellAppsTitle": "보안 애플리케이션",
+ "upsellBannerText": "무료 Premium 평가판을 받아서 이 기능을 사용하세요.",
+ "upsellDataDescription": "회사 리소스에 대한 액세스를 허용하려면 디바이스를 규격 또는 Microsoft Entra 하이브리드 조인으로 표시해야 합니다.",
+ "upsellDataTitle": "보안 데이터",
+ "upsellDescription": "조건부 액세스는 회사 데이터를 안전하게 유지하는 데 필요한 제어 및 보호를 제공하는 한편, 직원들이 모든 디바이스에서 최고의 작업을 수행할 수 있는 환경을 제공합니다. 예를 들어, 회사 네트워크 외부에서 액세스를 제한하거나 준수 정책을 충족하는 디바이스만 액세스하도록 제한할 수 있습니다.",
+ "upsellRiskDescription": "Microsoft의 기계 학습 시스템을 통해 검색된 위험 이벤트에 대해 다단계 인증을 요구합니다.",
+ "upsellRiskTitle": "위험으로부터 보호",
+ "upsellTitle": "조건부 액세스",
+ "upsellWhyTitle": "조건부 액세스를 사용하는 이유는 무엇인가요?",
+ "userAppNoneOption": "없음",
+ "userNamePlaceholderText": "사용자 이름 입력",
+ "userNotSetSeletorLabel": "0명의 사용자 및 그룹이 선택됨",
+ "userOnlySelectionBladeExcludeDescription": "정책에서 제외할 사용자 선택",
+ "userOrGroupSelectionCountDiffBannerText": "이 정책에 구성된 {0}이(가) 디렉터리에서 삭제되었지만 정책에서 다른 사용자 및 그룹에 영향을 주지 않습니다. 다음에 정책을 업데이트하면 삭제된 사용자 및/또는 그룹이 자동으로 제거됩니다.",
+ "userOrSPNotSetSelectorLabel": "0명의 사용자 또는 워크로드 ID가 선택됨",
+ "userOrSPSelectionBladeTitle": "사용자 또는 워크로드 ID",
+ "userOrSPSelectorInfoBallonText": "사용자, 그룹 및 서비스 사용자를 포함하여 정책이 적용되는 디렉터리의 ID",
+ "userRequired": "사용자가 필요함",
+ "userRiskErrorBox": "\"암호 변경 필요\" 권한을 선택하면 \"사용자 위험\" 조건을 선택해야 합니다.",
+ "userRiskReauth": "\"암호 변경 필요\" 부여 및 \"매번 로그인 빈도\" 세션 제어가 선택된 경우 \"로그인 위험\"이 아닌 \"사용자 위험\" 조건을 선택해야 합니다.",
+ "userSPRequired": "사용자 또는 서비스 주체 필요",
+ "userSPSelectorTitle": "사용자 또는 워크로드 ID",
+ "userSelectionBladeAllUsersAndGroups": "모든 사용자 및 그룹",
+ "userSelectionBladeExcludeDescription": "정책에서 제외할 사용자 및 그룹 선택",
+ "userSelectionBladeExcludeTabTitle": "제외",
+ "userSelectionBladeExcludedSelectorTitle": "제외된 사용자 및 그룹 선택",
+ "userSelectionBladeIncludeDescription": "이 정책이 적용될 사용자를 선택합니다.",
+ "userSelectionBladeIncludeTabTitle": "포함",
+ "userSelectionBladeIncludedSelectorTitle": "선택",
+ "userSelectionBladeSelectUsers": "사용자 선택",
+ "userSelectionBladeSelectedUsers": "사용자 및 그룹 선택",
+ "userSelectionBladeTitle": "사용자 및 그룹",
+ "userSelectorBladeTitle": "사용자",
+ "userSelectorExcluded": "{0} 제외됨",
+ "userSelectorGroupPlural": "그룹 {0}개",
+ "userSelectorGroupSingular": "그룹 1개",
+ "userSelectorIncluded": "{0}개 포함됨",
+ "userSelectorInfoBallonText": "디렉터리에서 정책이 적용되는 사용자 및 그룹입니다(예: '파일럿 그룹').",
+ "userSelectorSelected": "{0}이(가) 선택됨",
+ "userSelectorTitle": "사용자",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} 사용자",
+ "userSelectorUserSingular": "사용자 1명",
+ "userSelectorWithExclusion": "{0} 및 {1}",
+ "usersGroupsLabel": "사용자 및 그룹",
+ "viewApprovedAppsText": "승인된 클라이언트 앱 목록 보기",
+ "viewCompliantAppsText": "정책으로 보호된 클라이언트 앱 목록 보기",
+ "viewPolicyInformation": "정책 정보 보기",
+ "vpnBladeTitle": "VPN 연결",
+ "vpnCertCreateFailedMessage": "오류: {0}",
+ "vpnCertCreateFailedTitle": "{0}을(를) 만들지 못했습니다.",
+ "vpnCertCreateInProgressTitle": "{0} 만드는 중",
+ "vpnCertCreateSuccessMessage": "{0}을(를) 만들었습니다.",
+ "vpnCertCreateSuccessTitle": "{0}을(를) 만들었습니다.",
+ "vpnCertNoRowsMessage": "VPN 인증서를 찾을 수 없음",
+ "vpnCertUpdateFailedMessage": "오류: {0}",
+ "vpnCertUpdateFailedTitle": "{0} 업데이트 실패",
+ "vpnCertUpdateInProgressTitle": "{0} 업데이트 중",
+ "vpnCertUpdateSuccessMessage": "{0}을(를) 업데이트했습니다.",
+ "vpnCertUpdateSuccessTitle": "{0} 업데이트 성공",
+ "vpnFeatureInfo": "VPN 연결 및 조건부 액세스에 대한 자세한 내용을 보려면 여기를 클릭하세요.",
+ "vpnFeatureWarning": "Portal에서 VPN 인증서를 만들면 Microsoft Entra ID는 바로 VPN 클라이언트에 대해 짧은 수명의 인증서를 발급하는 데 사용됩니다. Vpn 클라이언트의 자격 증명 확인에 문제가 발생하지 않도록 vpn 인증서를 VPN 서버에 즉시 배포하는 것이 중요합니다.",
+ "vpnMenuText": "VPN 연결",
+ "vpncertDropdownDefaultOption": "기간",
+ "vpncertDropdownInfoBalloonContent": "만들 인증서의 기간 선택",
+ "vpncertDropdownLabel": "기간 선택",
+ "vpncertDropdownOneyearOption": "1년",
+ "vpncertDropdownThreeyearOption": "3년",
+ "vpncertDropdownTwoyearOption": "2년",
+ "wednesday": "수요일",
+ "whatIfCountry": "국가/지역",
+ "whatIfCountryInfo": "사용자가 로그인하는 국가/지역입니다.",
+ "whatIfDevicePlatformInfo": "사용자가 로그인하는 디바이스 플랫폼입니다.",
+ "whatIfEnterIpAddress": "IP 주소(예: 40.77.182.32) 입력",
+ "whatIfErrorInvalidIpAddress": "잘못된 IP 주소를 지정했습니다.",
+ "whatIfIpAddress": "IP 주소",
+ "whatIfIpAddressInfo": "사용자가 로그인하는 IP 주소입니다.",
+ "whatIfIpCountryInfoBoxText": "IP 주소 또는 국가/지역을 사용하는 경우 두 필드가 모두 필요하며 함께 올바르게 매핑되어야 합니다.",
+ "whatIfSelectCountry": "국가/지역 선택...",
+ "whatIfSelectDevicePlatform": "디바이스 플랫폼 선택...",
+ "whatIfSelectPrivateLink": "프라이빗 링크 선택...",
+ "whatIfSelectSignInRisk": "로그인 위험 선택",
+ "whatIfSignInRisk": "로그인 위험",
+ "whatIfSignInRiskInfo": "로그인과 관련된 위험 수준입니다.",
+ "whatIfUnknownAreas": "알 수 없는 영역",
+ "windows365InfoBox": "Windows 365를 선택하면 Cloud PC 및 Azure Virtual Desktop 세션 호스트에 대한 연결에 영향을 줍니다. 자세히 알아보려면 여기를 클릭하세요.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "워크로드 ID(미리 보기)",
+ "workloadIdentitiesLicenseText": "이 정책을 편집하려면 워크로드 ID 프리미엄 P1 또는 P2 라이선스가 필요합니다.",
+ "workloadIdentity": "워크로드 ID"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "개요"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "디바이스, 사용자 또는 품질 업데이트 버전으로 검색합니다."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "iOS 소프트웨어 업데이트 프로필을 로드하지 못함"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS 업데이트 프로필",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "프로필"
+ },
+ "listLoadError": "iOS 소프트웨어 업데이트 프로필을 로드할 수 없습니다. 나중에 다시 시도하세요.",
+ "lowercase": "iOS 업데이트 정책",
+ "uppercase": "iOS 업데이트 정책"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "죄송합니다. Apple에 연결하여 사용 가능한 버전 목록을 가져올 수 없습니다. 나중에 다시 시도하거나 최신 버전으로 계속 작업을 수행하세요.",
+ "latestUpdate": "최신 업데이트",
+ "noLongerSupported": "선택한 버전은 더 이상 지원되지 않음",
+ "olderVersionSelected": "이전 버전을 선택했으므로 디바이스에서 최신 버전으로 업데이트할 수 없도록 소프트웨어 업데이트의 표시 여부를 지연시키는 디바이스 제한 정책을 적용해야 합니다.",
+ "prefix": "iOS/iPadOS 설치",
+ "selectSupported": "Apple에서 지원하는 업데이트 버전 선택",
+ "updateToInstall": "설치할 업데이트"
+ },
+ "Schedule": {
+ "always": "다음 체크 인 시 업데이트",
+ "duringTimeWindows": "예약된 시간 동안 업데이트",
+ "header": "기본적으로 업데이트 정책이 디바이스에 할당되면 Intune에서 디바이스 체크 인 시 최신 업데이트를 배포합니다. 대신 사용자 지정된 시작 및 종료 시간으로 주간 일정을 만들 수 있습니다. 예약된 시간 이외에 업데이트하도록 선택하는 경우 예약된 시간이 끝날 때까지 Intune에서 업데이트를 배포하지 않습니다.",
+ "infoBalloon": "업데이트를 수행되는 시기입니다. 예약된 시간 도중이나 그 이후로 업데이트를 예약하려면 추가 입력이 필요합니다.",
+ "label": "일정 유형",
+ "outsideActiveHours": "활성 시간 외의 업데이트(레거시)",
+ "outsideTimeWindows": "예약된 시간 외의 시간에 업데이트",
+ "timeWindow": "기간",
+ "timeZone": "표준 시간대",
+ "title": "정책 일정 설정 업데이트:",
+ "weekly": "주별 일정",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "업데이트 시 디바이스에 설치할 iOS/iPadOS 버전입니다.",
+ "label": "설치할 버전 선택"
+ },
+ "header": "프로필을 만들어 할당된 디바이스에서 최신 iOS/iPadOS 업데이트를 자동으로 설치하도록 적용합니다. 이러한 설정은 소프트웨어 업데이트 배포 방법과 시기를 결정합니다. 이 프로필은 사용자가 OS를 수동으로 업데이트하는 것을 방지하지 않습니다. 그렇지 않을 경우 디바이스 구성 제한 정책에 따라 최대 90일 동안 업데이트가 방지될 수 있습니다. 업데이트는 감독되는 디바이스에만 적용됩니다.",
+ "notAvailable": "해당 사항 없음"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "표시할 iOS 업데이트 정책이 없습니다.",
+ "macOsUpdates": "표시할 macOS 소프트웨어 업데이트 정책이 없습니다.",
+ "windowsUpdates": "Windows 10 이상에서 표시할 업데이트 링이 없습니다."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "디바이스 이름",
+ "deviceUpdateStatus": "디바이스 업데이트 상태",
+ "lastUpdated": "마지막으로 업데이트한 날짜",
+ "osVersion": "OS 버전",
+ "userPrincipalName": "사용자 이름"
+ },
+ "maximumOSVersionFilter": "최대 OS 버전",
+ "minimumOSVersionFilter": "최소 OS 버전",
+ "noData": "표시할 데이터가 없음",
+ "searchBoxPlaceholder": "디바이스 이름, 사용자 이름 또는 OS 버전별 검색",
+ "title": "macOS 디바이스에 대한 계정 요약"
+ },
+ "Category": {
+ "configurationDataFile": "구성 데이터 파일",
+ "critical": "위험",
+ "firmware": "펌웨어",
+ "other": "기타"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "마지막으로 업데이트한 날짜",
+ "successfulUpdateCount": "업데이트 배포 성공",
+ "totalUpdateCount": "전체 업데이트가 배포됨",
+ "updateCategory": "업데이트 범주",
+ "updateCategoryStatus": "업데이트 범주 상태"
+ },
+ "noData": "표시할 데이터가 없음"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "macOS 소프트웨어 업데이트 프로필을 로드하지 못함"
+ }
+ },
+ "State": {
+ "available": "사용 가능한 공간",
+ "commandFailed": "명령 실패",
+ "downloadFailed": "다운로드 실패",
+ "downloadInsufficientNetwork": "다운로드 네트워크 부족",
+ "downloadInsufficientPower": "다운로드 전원 부족",
+ "downloadInsufficientSpace": "다운로드 공간 부족",
+ "downloaded": "다운로드됨",
+ "downloading": "다운로드 중",
+ "idle": "유휴 상태",
+ "installFailed": "설치 실패",
+ "installInsufficientPower": "설치 전원 부족",
+ "installInsufficientSpace": "설치 공간 부족",
+ "installing": "설치 중",
+ "scheduled": "예약됨",
+ "success": "성공",
+ "unknown": "알 수 없음"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "마지막으로 업데이트한 날짜",
+ "updateName": "업데이트 이름",
+ "updateStatus": "상태 업데이트",
+ "version": "버전"
+ },
+ "noData": "표시할 데이터가 없음",
+ "searchBoxPlaceholder": "업데이트 이름 또는 버전별 검색"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS 업데이트 프로필",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "프로필"
+ },
+ "error": "오류",
+ "errorOrErrors": "오류",
+ "errors": "오류",
+ "listLoadError": "macOS 소프트웨어 업데이트 프로필을 로드할 수 없습니다. 나중에 다시 시도하세요.",
+ "lowercase": "macOs 업데이트 정책",
+ "other": "기타",
+ "subtitle": "MacOS 소프트웨어 업데이트",
+ "upToDate": "최신",
+ "uppercase": "macOS 업데이트 정책"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "나중에 다시 시도하세요.",
+ "title": "{0}을(를) 삭제하지 못했습니다."
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "나중에 다시 시도하세요."
+ },
+ "LoadConfigurationFailed": {
+ "description": "나중에 다시 시도하세요.",
+ "title": "{0}을(를) 로드하지 못했습니다."
+ },
+ "idWrongFormat": "프로필에 제공된 ID의 형식이 예상된 형식이 아닙니다."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "창을 하나 이상 선택해야 함",
+ "tooMany": "최대 20개의 시간 창을 구성할 수 있음"
+ }
+ },
+ "endDay": "종료일",
+ "endTime": "종료 시간",
+ "startDay": "시작일",
+ "startTime": "시작 시간",
+ "timeWindowError": "1시간 이상 이어지는 시간을 선택합니다."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Windows 10 이상용 업데이트 링 프로필을 로드하지 못했습니다."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Windows 10 이상용 링 업데이트",
+ "title": "비즈니스용 Windows 업데이트"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 이상",
+ "title": "Windows 10 이상용 링 업데이트"
+ },
+ "listLoadError": "Windows 10 이상용 업데이트 링 프로필을 로드할 수 없습니다. 나중에 다시 시도하세요.",
+ "lowercase": "업데이트 링",
+ "uppercase": "업데이트 링"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "정책 설정 업데이트",
+ "updateRingSettings": "업데이트 링 설정"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "{0} 만들기",
+ "edit": "{0} 편집"
+ }
+ },
+ "notScannedYet": "아직 검사하지 않음",
+ "outOfDateIosDevices": "오래된 iOS 장치"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge 버전 77 이상",
+ "storeApp": "스토어 앱",
+ "office365Suite": "Microsoft 365 앱",
+ "microsoftDefenderATP": "엔드포인트용 Microsoft Defender",
+ "other": "기타",
+ "webApplication": "웹 애플리케이션"
+ },
+ "Filters": {
+ "ruleSyntax": "규칙 구문",
+ "filters": "필터"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "검색 스크립트를 선택하세요.",
+ "scriptFileLabel": "검색 스크립트 선택"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "활성화된 경우 디바이스는 검색 PowerShell 스크립트에서 반환된 사용자 지정 데이터를 기반으로 JSON 파일에 정의된 사용자 지정 규칙에 따라 준수해야 합니다.",
+ "label": "사용자 지정 규정 준수는 현재 미리 보기로 제공됩니다. 일반 공급 상태가 되면 Microsoft Intune을 포함하는 라이선싱 옵션에 추가 비용을 지불하고 추가할 수 있습니다."
+ },
+ "ScriptPicker": {
+ "objectName": "스크립트",
+ "placeholder": "선택하려면 클릭",
+ "searchboxPlaceholder": "스크립트 이름으로 검색",
+ "title": "검색 스크립트 선택"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "사용자 지정 규정 준수 규칙 요약"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "사용자 지정 규정 준수 설정을 사용하여 JSON 파일 업로드 및 유효성 검사",
+ "noFileSelectedError": "JSON 파일을 선택하세요.",
+ "parseFileSelectedError": "JSON 파일이 유효하지 않음"
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "사용자가 업무용으로 앱에 액세스하기 위해 충족해야 하는 PIN 및 자격 증명 요구 사항을 구성합니다."
+ },
+ "DataProtection": {
+ "infoText": "이 그룹에는 잘라내기, 복사, 붙여넣기, 저장 제한과 같은 DLP(데이터 유실 방지) 컨트롤이 포함됩니다. 이 설정은 사용자가 앱의 데이터와 상호작용하는 방법을 결정합니다."
+ },
+ "DeviceTypes": {
+ "selectOne": "하나 이상의 디바이스 유형을 선택합니다."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "모든 디바이스 유형에 있는 앱으로 대상 지정"
+ },
+ "infoText": "다른 디바이스의 앱에 이 정책을 적용하는 방법을 선택한 다음 앱을 하나 이상 추가합니다.",
+ "selectOne": "정책을 만들려면 앱을 하나 이상 선택하세요."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "엔드포인트용 Microsoft Defender",
+ "androidDeviceOwnerApplications": "애플리케이션",
+ "androidDeviceOwnerPolicyMessages": "사용자 지정 지원 정보",
+ "androidForWorkPassword": "디바이스 암호",
+ "appManagement": "앱 차단 또는 허용",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "제한된 앱",
+ "applicationVisibility": "앱 표시 또는 숨기기",
+ "applications": "앱 스토어",
+ "applicationsAndGames": "앱 스토어, 문서 보기, 게임",
+ "applicationsAndGoogle": "Google Play 스토어",
+ "appsAndExperience": "앱 및 환경",
+ "associatedDomains": "연결된 도메인",
+ "autonomousSingleAppMode": "자치 단일 앱 모드",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Windows 암호화",
+ "bootOptions": "부팅 옵션",
+ "browser": "브라우저",
+ "builtinApps": "기본 제공 앱",
+ "cameras": "카메라",
+ "cellular": "셀룰러",
+ "cloudAndStorage": "클라우드 및 스토리지",
+ "cloudPrint": "클라우드 프린터",
+ "complianceEmailProfile": "전자 메일",
+ "connectedDevices": "연결된 디바이스",
+ "connectivity": "셀룰러 및 연결",
+ "contentCaching": "콘텐츠 캐싱",
+ "controlPanelAndSettings": "제어판 및 설정",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "사용자 지정 규정 준수",
+ "customConfiguration": "사용자 지정 구성 프로필",
+ "customOMASettings": "사용자 지정 OMA-URI 설정",
+ "customPreferences": "기본 설정 파일",
+ "dFCISecuritySettings": "보안 설정",
+ "defender": "Microsoft Defender 바이러스 백신",
+ "defenderAntivirus": "Microsoft Defender 바이러스 백신",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows 방화벽",
+ "defenderLocalSecurityOptions": "로컬 디바이스 보안 옵션",
+ "defenderSecurityCenter": "Microsoft Defender 보안 센터",
+ "deliveryOptimization": "제공 최적화",
+ "derivedCredentialAuthenticationConfiguration": "파생된 자격 증명",
+ "deviceExperience": "디바이스 환경",
+ "deviceFirmwareConfigurationInterface": "디바이스 펌웨어 구성 인터페이스",
+ "deviceGuard": "Microsoft Defender 애플리케이션 제어",
+ "deviceHealth": "디바이스 상태",
+ "devicePassword": "디바이스 암호",
+ "deviceProperties": "디바이스 속성",
+ "deviceRestrictions": "일반",
+ "deviceSecurity": "시스템 보안",
+ "display": "표시",
+ "domainJoin": "도메인 가입",
+ "domains": "도메인",
+ "edgeBrowser": "Microsoft Edge 레거시(버전 45 이하)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge 키오스크 모드",
+ "editionUpgrade": "버전 업그레이드",
+ "education": "교육",
+ "educationDeviceCerts": "디바이스 인증서",
+ "educationStudentCerts": "학생 인증서",
+ "educationTakeATest": "테스트 수행",
+ "educationTeacherCerts": "교사 인증서",
+ "emailProfile": "전자 메일",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Single Sign-On 앱 확장",
+ "filevault": "FileVault",
+ "firewall": "방화벽",
+ "games": "게임",
+ "gatekeeper": "게이트키퍼",
+ "healthMonitoring": "상태 모니터링",
+ "homeScreenLayout": "홈 화면 레이아웃",
+ "iOSWallpaper": "배경 무늬",
+ "importedPFX": "PKCS 가져온 인증서",
+ "iosDefenderAtp": "엔드포인트용 Microsoft Defender",
+ "iosKiosk": "키오스크",
+ "kernelExtensions": "커널 확장",
+ "keyboardAndDictionary": "키보드 및 사전",
+ "kiosk": "키오스크",
+ "kioskAndroidEnterprise": "전용 디바이스",
+ "kioskConfiguration": "키오스크",
+ "kioskConfigurationV2": "키오스크",
+ "kioskWebBrowser": "키오스크 웹 브라우저",
+ "lockScreenMessage": "잠금 화면 메시지",
+ "lockedScreenExperience": "잠긴 화면 환경",
+ "logging": "보고 및 원격 분석",
+ "loginItems": "로그인 항목",
+ "loginWindow": "로그인 창",
+ "macDefenderAtp": "엔드포인트용 Microsoft Defender",
+ "maintenance": "유지 관리",
+ "malware": "맬웨어",
+ "messaging": "메시징",
+ "microphonesAndSpeakers": "마이크 및 스피커",
+ "networkBoundary": "네트워크 경계",
+ "networkProxy": "네트워크 프록시",
+ "notifications": "앱 알림",
+ "pKCS": "PKCS 인증서",
+ "password": "암호",
+ "personalProfile": "개인 프로필",
+ "personalization": "개인 설정",
+ "policyOverride": "그룹 정책 재정의",
+ "ports": "포트",
+ "powerSettings": "전원 설정",
+ "printer": "프린터",
+ "privacy": "개인정보취급방침",
+ "privacyPerApp": "앱별 개인 정보 보호 예외",
+ "privacyPreferences": "개인 정보 기본 설정",
+ "projection": "프로젝션",
+ "radios": "라디오",
+ "sCCMCompliance": "Configuration Manager 준수",
+ "sCEP": "SCEP 인증서",
+ "sCEPProperties": "SCEP 인증서",
+ "sMode": "모드 전환(Windows 참가자인 경우에만)",
+ "safari": "Safari",
+ "search": "검색",
+ "session": "세션",
+ "sharedDevice": "공유 iPad",
+ "sharedPCAccountManager": "공유 다중 사용자 디바이스",
+ "singleSignOn": "Single Sign-On",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "설정",
+ "start": "시작",
+ "systemExtensions": "시스템 확장",
+ "systemSecurity": "시스템 보안",
+ "trustedCert": "신뢰할 수 있는 인증서",
+ "uEFIAccess": "UEFI 액세스",
+ "updates": "업데이트",
+ "userRights": "사용자 권한",
+ "usersAndAccounts": "사용자 및 계정",
+ "vPN": "기본 VPN",
+ "vPNApps": "자동 VPN",
+ "vPNAppsAndTrafficRules": "앱 및 트래픽 규칙",
+ "vPNConditionalAccess": "조건부 액세스",
+ "vPNConnectivity": "연결",
+ "vPNDNSTriggers": "DNS 설정",
+ "vPNIKEv2": "IKEv2 설정",
+ "vPNProxy": "프록시",
+ "vPNSplitTunneling": "분할 터널링",
+ "vPNTrustedNetwork": "신뢰할 수 있는 네트워크 검색",
+ "wakeSettings": "절전 모드 해제 설정",
+ "webContentFilter": "웹 콘텐츠 필터",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "엔드포인트용 Microsoft Defender",
+ "windowsDefenderATP": "엔드포인트용 Microsoft Defender",
+ "windowsHelloForBusiness": "비즈니스용 Windows Hello",
+ "windowsSpotlight": "Windows 추천",
+ "wiredNetwork": "유선 네트워크",
+ "wireless": "무선",
+ "wirelessProjection": "무선 프로젝션",
+ "workProfile": "회사 프로필 설정",
+ "workProfilePassword": "회사 프로필 암호",
+ "xboxServices": "Xbox 서비스",
+ "zebraMx": "MX 프로필(Zebra만)",
+ "complianceActionsLabel": "비준수에 대한 작업"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "허용된 URL",
+ "tooltip": "업무 중에 사용자가 액세스할 수 있는 사이트를 지정합니다. 다른 사이트는 허용되지 않습니다. 허용/차단 목록 중 하나만 구성할 수 있으며, 둘 다 구성할 수는 없습니다. "
+ },
+ "ApplicationProxyRedirection": {
+ "header": "애플리케이션 프록시",
+ "title": "애플리케이션 프록시 리디렉션",
+ "tooltip": "앱 프록시 리디렉션을 사용하도록 설정하여 사용자에게 회사 링크 및 온-프레미스 웹앱에 대한 액세스 권한을 부여합니다."
+ },
+ "BlockedURLs": {
+ "title": "차단된 URL",
+ "tooltip": "업무 중에 사용자에 대해 차단되는 사이트를 지정합니다. 다른 사이트는 모두 허용됩니다. 허용/차단 목록 중 하나만 구성할 수 있으며, 둘 다 구성할 수는 없습니다. "
+ },
+ "Bookmarks": {
+ "header": "관리형 책갈피",
+ "tooltip": "업무 중에 Microsoft Edge를 사용할 때 사용자가 사용할 수 있는 책갈피로 지정된 URL 목록을 입력합니다.",
+ "uRL": "URL"
+ },
+ "HomepageURL": {
+ "header": "관리되는 홈페이지",
+ "title": "홈페이지 바로 가기 URL",
+ "tooltip": "사용자가 Microsoft Edge에서 새 탭을 열 때 검색 창 아래에 첫 번째 아이콘으로 표시되는 홈페이지 바로 가기를 구성합니다."
+ },
+ "PersonalContext": {
+ "label": "제한된 사이트를 개인 컨텍스트로 리디렉션",
+ "tooltip": "사용자가 제한된 사이트를 열기 위해 개인 컨텍스트로의 전환을 허용받아야 하는지를 구성합니다."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home SKU",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "키에 포함된 비트 수를 선택합니다.",
- "keyUsage": "인증서의 공개 키를 교환하는 데 필요한 암호화 작업을 지정합니다.",
- "renewalThreshold": "디바이스가 인증서의 갱신을 요청하기 전에 허용되는 남은 인증서 수명의 백분율(1~99%)을 입력합니다. Intune의 권장 값은 20%입니다(1~99%).",
- "rootCert": "이전에 구성 및 할당된 루트 CA 인증서 프로필을 선택합니다. CA 인증서는 이 프로필(현재 구성 중인 프로필)에 대해 인증서를 발급 중인 CA의 루트 인증서와 일치해야 합니다.",
- "scepServerUrl": "SCEP를 통해 인증서를 발급하는 NDES 서버의 URL을 입력합니다(HTTPS여야 함). 예: https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "SCEP를 통해 인증서를 발급하는 NDES 서버의 URL을 하나 이상 추가합니다(HTTPS여야 함). 예: https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "주체 대체 이름",
- "subjectNameFormat": "주체 이름 형식",
- "validityPeriod": "인증서가 만료되기 전까지 남은 시간입니다. 인증서 템플릿에 표시된 유효 기간보다 낮거나 같은 값을 입력합니다. 기본값은 1년으로 설정됩니다."
- },
- "appInstallContext": "이 앱과 연결할 설치 컨텍스트를 지정합니다. 이중 모드 앱의 경우 이 앱에 대해 원하는 컨텍스트를 선택합니다. 다른 모든 앱의 경우 이 옵션은 패키지에 따라 미리 선택되어 있으며 수정할 수 없습니다.",
- "autoUpdateMode": "앱의 업데이트 우선 순위를 구성합니다. 앱을 업데이트하기 전에 장치가 Wi-Fi에 연결되고, 충전 중이고, 활발하게 사용되지 않도록 하려면 기본값을 선택합니다. 충전 상태, Wi-Fi 기능 또는 장치에서의 최종 사용자 활동에 관계없이 개발자가 앱을 게시하는 즉시 앱을 업데이트하려면 높은 우선 순위를 선택합니다. 최대 90일 동안 앱 업데이트를 취소하려면 연기됨을 선택합니다. 높은 우선 순위 및 연기는 DO 장치에만 적용됩니다.",
- "configurationSettingsFormat": "구성 설정 형식 텍스트",
- "ignoreVersionDetection": "Google Chrome처럼 앱 개발자가 자동으로 업데이트하는 앱의 경우 “예”로 설정합니다.",
- "ignoreVersionDetectionMacOSLobApp": "앱 개발자가 자동으로 업데이트하는 앱의 경우 또는 설치 전에 앱 bundleID만 확인하려는 경우 \"예\"를 선택합니다. 설치 전에 앱 bundleID 및 버전 번호를 확인하려면 \"아니요\"를 선택합니다.",
- "installAsManagedMacOSLobApp": "이 설정은 macOS 11 이상에만 적용됩니다. 앱이 설치되지만 macOS 10.15 이하에서는 관리되지 않습니다.",
- "installContextDropdown": "적절한 설치 컨텍스트를 선택하세요. 사용자 컨텍스트는 대상 사용자에 대해서만 앱을 설치하는 반면 디바이스 컨텍스트는 디바이스의 모든 사용자에 대해 앱을 설치합니다.",
- "ldapUrl": "클라이언트가 전자 메일 받는 사람에 대한 공개 암호화 키를 가져올 수 있는 LDAP 호스트 이름입니다. 키를 사용할 수 있게 되면 전자 메일이 암호화됩니다. 지원되는 형식:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "연결된 앱에 대한 런타임 권한을 선택합니다.",
- "policyAssociatedApp": "이 정책과 연결할 앱을 선택합니다.",
- "policyConfigurationSettings": "이 정책에 대한 구성 설정을 정의하는 데 사용할 방법을 선택합니다.",
- "policyDescription": "필요에 따라 이 구성 정책에 대한 설명을 입력합니다.",
- "policyEnrollmentType": "이 설정을 디바이스 관리 또는 Intune SDK로 만든 앱을 통해 관리할지를 선택하세요.",
- "policyName": "이 구성 정책의 이름을 입력합니다.",
- "policyPlatform": "이 앱 구성 정책을 적용할 플랫폼을 선택합니다.",
- "policyProfileType": "이 앱 구성 프로필을 적용할 디바이스 프로필 유형을 선택합니다.",
- "policySMime": "Outlook에 대한 S/MIME 서명 및 암호화 설정을 구성합니다.",
- "sMimeDeployCertsFromIntune": "S/MIME 인증서가 Outlook에서 사용하기 위해 Intune에서 배달되는지 여부를 지정합니다.\r\nIntune은 회사 포털을 통해 자동으로 서명 및 암호화 인증서를 사용자에게 배포합니다.",
- "sMimeEnable": "메일을 작성할 때 S/MIME 컨트롤 사용 여부를 지정합니다.",
- "sMimeEnableAllowChange": "사용자가 [S/MIME 사용] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "sMimeEncryptAllEmails": "메일을 모두 암호화해야 하는지 여부를 지정합니다.\r\n암호화 기능은 의도된 수신자만 데이터를 읽을 수 있도록 데이터를 암호화 텍스트로 변환합니다.",
- "sMimeEncryptAllEmailsAllowChange": "사용자가 [모든 메일 암호화] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "sMimeEncryptionCertProfile": "메일 암호화에 사용할 인증서 프로필을 지정하세요.",
- "sMimeSignAllEmails": "모든 메일에 서명해야 하는지 여부를 지정합니다.\r\n디지털 서명은 메일의 신뢰성을 확인하고 전송 중에 내용이 훼손되지 않았는지 확인합니다.",
- "sMimeSignAllEmailsAllowChange": "사용자가 [모든 메일 서명] 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "sMimeSigningCertProfile": "메일 서명에 사용할 인증서 프로필을 지정하세요.",
- "sMimeUserNotificationType": "Outlook용 S/MIME 인증서를 검색하려면 회사 포털을 열어야 함을 사용자에게 알리는 방법입니다."
- },
+ "Languages": {
+ "ar-aE": "아랍어(아랍에미리트)",
+ "ar-bH": "아랍어(바레인)",
+ "ar-dZ": "아랍어(알제리)",
+ "ar-eG": "아랍어(이집트)",
+ "ar-iQ": "아랍어(이라크)",
+ "ar-jO": "아랍어(요르단)",
+ "ar-kW": "아랍어(쿠웨이트)",
+ "ar-lB": "아랍어(레바논)",
+ "ar-lY": "아랍어(리비아)",
+ "ar-mA": "아랍어(모로코)",
+ "ar-oM": "아랍어(오만)",
+ "ar-qA": "아랍어(카타르)",
+ "ar-sA": "아랍어(사우디아라비아)",
+ "ar-sY": "아랍어(시리아)",
+ "ar-tN": "아랍어(튀니지)",
+ "ar-yE": "아랍어(예멘)",
+ "az-cyrl": "아제르바이잔어(키릴 자모, 아제르바이잔)",
+ "az-latn": "아제르바이잔어(라틴 문자, 아제르바이잔)",
+ "bn-bD": "벵골어(방글라데시)",
+ "bn-iN": "벵골어(인도)",
+ "bs-cyrl": "보스니아어(키릴 자모)",
+ "bs-latn": "보스니아어(라틴 문자)",
+ "zh-cN": "중국어(PRC)",
+ "zh-hK": "중국어(홍콩 특별 행정구)",
+ "zh-mO": "중국어(마카오 특별 행정구)",
+ "zh-sG": "중국어(싱가포르)",
+ "zh-tW": "중국어(대만)",
+ "hr-bA": "크로아티아어(라틴 문자)",
+ "hr-hR": "크로아티아어(크로아티아)",
+ "nl-bE": "네덜란드어(벨기에)",
+ "nl-nL": "네덜란드어(네덜란드)",
+ "en-aU": "영어(오스트레일리아)",
+ "en-bZ": "영어(벨리즈)",
+ "en-cA": "영어(캐나다)",
+ "en-cabn": "영어(카리브 해)",
+ "en-iE": "영어(아일랜드)",
+ "en-iN": "영어(인도)",
+ "en-jM": "영어(자메이카)",
+ "en-mY": "영어(말레이시아)",
+ "en-nZ": "영어(뉴질랜드)",
+ "en-pH": "영어(필리핀)",
+ "en-sG": "영어(싱가포르)",
+ "en-tT": "영어(트리니다드 토바고)",
+ "en-uK": "영어(영국)",
+ "en-uS": "영어(미국)",
+ "en-zA": "영어(남아프리카 공화국)",
+ "en-zW": "영어(짐바브웨)",
+ "fr-bE": "프랑스어(벨기에)",
+ "fr-cA": "프랑스어(캐나다)",
+ "fr-cH": "프랑스어(스위스)",
+ "fr-fR": "프랑스어(프랑스)",
+ "fr-lU": "프랑스어(룩셈부르크)",
+ "fr-mC": "프랑스어(모나코)",
+ "de-aT": "독일어(오스트리아)",
+ "de-cH": "독일어(스위스)",
+ "de-dE": "독일어(독일)",
+ "de-lI": "독일어(리히텐슈타인)",
+ "de-lU": "독일어(룩셈부르크)",
+ "iu-cans": "이눅티투트어(음절형, 캐나다)",
+ "iu-latn": "이눅티투트어(라틴 문자, 캐나다)",
+ "it-cH": "이탈리아어(스위스)",
+ "it-iT": "이탈리아어(이탈리아)",
+ "ms-bN": "말레이어(브루나이)",
+ "ms-mY": "말레이어(말레이시아)",
+ "mn-cN": "몽골어(전통 몽골어, 중국)",
+ "mn-mN": "몽골어(키릴 자모, 몽골)",
+ "no-nB": "노르웨이어, 복말(노르웨이)",
+ "no-nn": "노르웨이어(니노르스크, 노르웨이)",
+ "pt-bR": "포르투갈어(브라질)",
+ "pt-pT": "포르투갈어(포르투갈)",
+ "quz-bO": "케추아어(볼리비아)",
+ "quz-eC": "케추아어(에콰도르)",
+ "quz-pE": "케추아어(페루)",
+ "smj-nO": "룰레 라프어(노르웨이)",
+ "smj-sE": "룰레 라프어(스웨덴)",
+ "se-fI": "북부 라프어(핀란드)",
+ "se-nO": "북부 라프어(노르웨이)",
+ "se-sE": "북부 라프어(스웨덴)",
+ "sma-nO": "남부 라프어(노르웨이)",
+ "sma-sE": "남부 라프어(스웨덴)",
+ "smn": "이나리 라프어(핀란드)",
+ "sms": "스콜트 라프어(핀란드)",
+ "sr-Cyrl-bA": "세르비아어(키릴 자모)",
+ "sr-Cyrl-rS": "세르비아어(키릴 자모, 세르비아-몬테네그로)",
+ "sr-Latn-bA": "세르비아어(라틴 문자)",
+ "sr-Latn-rS": "세르비아어(라틴 문자, 세르비아)",
+ "dsb": "저지 소르비아어(독일)",
+ "hsb": "고지 소르비아어(독일)",
+ "es-es-tradnl": "스페인어(스페인, 전통 정렬)",
+ "es-aR": "스페인어(아르헨티나)",
+ "es-bO": "스페인어(볼리비아)",
+ "es-cL": "스페인어(칠레)",
+ "es-cO": "스페인어(콜롬비아)",
+ "es-cR": "스페인어(코스타리카)",
+ "es-dO": "스페인어(도미니카 공화국)",
+ "es-eC": "스페인어(에콰도르)",
+ "es-eS": "스페인어(스페인)",
+ "es-gT": "스페인어(과테말라)",
+ "es-hN": "스페인어(온두라스)",
+ "es-mX": "스페인어(멕시코)",
+ "es-nI": "스페인어(니카라과)",
+ "es-pA": "스페인어(파나마)",
+ "es-pE": "스페인어(페루)",
+ "es-pR": "스페인어(푸에르토리코)",
+ "es-pY": "스페인어(파라과이)",
+ "es-sV": "스페인어(엘살바도르)",
+ "es-uS": "스페인어(미국)",
+ "es-uY": "스페인어(우루과이)",
+ "es-vE": "스페인어(베네수엘라)",
+ "sv-fI": "스웨덴어(핀란드)",
+ "uz-cyrl": "우즈베크어(키릴 자모, 우즈베키스탄)",
+ "uz-latn": "우즈베크어(라틴 문자, 우즈베키스탄)",
+ "af": "아프리칸스어(남아프리카 공화국)",
+ "sq": "알바니아어(알바니아)",
+ "am": "암하라어(에티오피아)",
+ "hy": "아르메니아어(아르메니아)",
+ "as": "아삼어(인도)",
+ "ba": "바슈키르어(러시아)",
+ "eu": "바스크어(바스크어)",
+ "be": "벨라루스어(벨로루시)",
+ "br": "브르타뉴어(프랑스)",
+ "bg": "불가리아어(불가리아)",
+ "ca": "카탈로니아어(카탈로니아어)",
+ "co": "코르시카어(프랑스)",
+ "cs": "체코어(체코)",
+ "da": "덴마크어(덴마크)",
+ "dv": "디베히어(몰디브)",
+ "et": "에스토니아어(에스토니아)",
+ "fo": "페로어(페로 제도)",
+ "fil": "필리핀어(필리핀)",
+ "fi": "핀란드어(핀란드)",
+ "gl": "갈리시아어(갈리시아)",
+ "ka": "조지아어(그루지야)",
+ "el": "그리스어(그리스)",
+ "gu": "구자라트어(인도)",
+ "ha": "하우사어(라틴 문자, 나이지리아)",
+ "he": "히브리어(이스라엘)",
+ "hi": "힌디어(인도)",
+ "hu": "헝가리어(헝가리)",
+ "is": "아이슬란드어(아이슬란드)",
+ "ig": "이그보어(나이지리아)",
+ "id": "인도네시아어(인도네시아)",
+ "ga": "아일랜드어(아일랜드)",
+ "xh": "코사어(남아프리카 공화국)",
+ "zu": "줄루어(남아프리카 공화국)",
+ "ja": "일본어(일본)",
+ "kn": "칸나다어(인도)",
+ "kk": "카자흐어(카자흐스탄)",
+ "km": "크메르어(캄보디아)",
+ "rw": "키냐르완다어(르완다)",
+ "sw": "스와힐리어(케냐)",
+ "kok": "코카니어(인도)",
+ "ko": "한국어(대한민국)",
+ "ky": "키르기스어(키르기스스탄)",
+ "lo": "라오어(라오스)",
+ "lv": "라트비아어(라트비아)",
+ "lt": "리투아니아어(리투아니아)",
+ "lb": "룩셈부르크어(룩셈부르크)",
+ "mk": "마케도니아어(북마케도니아)",
+ "ml": "몽골어(인도)",
+ "mt": "몰타어(몰타)",
+ "mi": "마오리어(뉴질랜드)",
+ "mr": "마라티어(인도)",
+ "moh": "모호크어(모호크)",
+ "ne": "네팔어(네팔)",
+ "oc": "오크어(프랑스)",
+ "or": "오디아어(인도)",
+ "ps": "파슈토어(아프가니스탄)",
+ "fa": "페르시아어",
+ "pl": "폴란드어(폴란드)",
+ "pa": "펀잡어(인도)",
+ "ro": "루마니아어(루마니아)",
+ "rm": "로만시어(스위스)",
+ "ru": "러시아어(러시아)",
+ "sa": "산스크리트어(인도)",
+ "st": "세소토 사 레보아어(남아프리카 공화국)",
+ "tn": "세츠와나어(남아프리카 공화국)",
+ "si": "스리랑카어(스리랑카)",
+ "sk": "슬로바키아어(슬로바키아)",
+ "sl": "슬로베니아어(슬로베니아)",
+ "sv": "스웨덴어(스웨덴)",
+ "syr": "시리아어(시리아)",
+ "tg": "타지크어(키릴 자모, 타지키스탄)",
+ "ta": "타밀어(인도)",
+ "tt": "타타르어(러시아)",
+ "te": "텔루구어(인도)",
+ "th": "태국어(태국)",
+ "bo": "티베트어(중국)",
+ "tr": "터키어(터키)",
+ "tk": "투르크멘어(투르크메니스탄)",
+ "uk": "우크라이나어(우크라이나)",
+ "ur": "우르두어(파키스탄)",
+ "vi": "베트남어(베트남)",
+ "cy": "웨일스어(영국)",
+ "wo": "월로프어(세네갈)",
+ "ii": "이 문자(중국)",
+ "yo": "요루바어(나이지리아)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "기본 제공 역할",
+ "customCloudPCRole": "사용자 지정 Windows 365 역할",
+ "customIntuneRole": "사용자 지정 Intune 역할",
+ "customRole": "사용자 지정 역할"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "앱 버전",
+ "dependencyName": "종속성 이름",
+ "lastModifiedTime": "마지막으로 수정된 시간",
+ "relationship": "관계",
+ "replaced": "대체됨",
+ "searchPlaceholder": "앱 이름으로 필터링",
+ "status": "상태 정보",
+ "statusDetails": "상태",
+ "supersedenceName": "대체 이름"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "자식 종속성",
+ "indirectSupersedence": "직접 관련되지 않음",
+ "supersedenceAncestors": "대체하는",
+ "supersedenceDescendants": "대체됨"
+ },
+ "SupersededReplaced": {
+ "no": "아니요",
+ "yes": "예"
+ },
+ "Tabs": {
+ "chart": "차트",
+ "dependency": "종속성",
+ "label": "보기: ",
+ "supersedence": "대체",
+ "table": "테이블"
+ },
+ "dependencyGraphAriaLabel": "앱 종속성 차트",
+ "supersedenceGraphAriaLabel": "앱 대체 차트"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "다시 시작이 적용될 때까지 대기할 일 수"
+ },
+ "Description": {
+ "label": "설명"
+ },
+ "Name": {
+ "label": "이름"
+ },
+ "QualityUpdateRelease": {
+ "label": "디바이스 OS 버전이 다음보다 작은 경우 품질 업데이트를 신속하게 설치:"
+ },
+ "bladeTitle": "Windows 10 이상의 품질 업데이트(미리 보기)",
+ "loadError": "로드하지 못했습니다."
+ },
+ "TabName": {
+ "qualityUpdateSettings": "설정"
+ },
+ "infoBoxText": "기존 Windows 10 이상의 운영체제를 설치한 디바이스의 업데이트 링 정책 외에 현재 사용 가능한 유일한 전용 품질 업데이트 컨트롤은 지정된 패치 수준보다 뒤쳐진 디바이스에 대한 품질 업데이트를 신속히 처리하는 기능입니다. 향후 추가 컨트롤이 제공될 예정입니다.",
+ "licenseLearnMoreText": "필수 구성 요소 및 품질 업데이트 정책에 대해 자세히 알아보세요.",
+ "licenseWarningBoxText": "품질 업데이트 정책을 만들려면 특정 라이선스가 필요합니다.",
+ "warningBoxText": "소프트웨어 업데이트를 신속하게 처리하면 필요한 경우 규정 준수 상태에 도달하는 시간을 줄이는 데 도움이 될 수 있지만 최종 사용자의 생산성에 미치는 영향이 커집니다. 업무 시간 중에 시스템을 다시 시작할 가능성이 훨씬 증가하기 때문입니다."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "Android에서는 PIN 대신에 지문 식별 사용을 허용할 수 있습니다. 사용자가 자신의 작업 계정으로 이 앱에 액세스할 때 지문을 제공하라는 메시지가 표시됩니다.",
+ "iOS": "iOS/iPadOS 디바이스에서 PIN 대신 지문 ID를 사용하도록 할 수 있습니다. 사용자가 회사 계정을 사용하여 이 앱에 액세스하려고 하면 지문을 제공하라는 메시지가 표시됩니다.",
+ "mac": "Mac 디바이스에서 PIN 대신 지문 ID를 사용하도록 할 수 있습니다. 사용자가 회사 계정을 사용하여 이 앱에 액세스하려고 하면 지문을 제공하라는 메시지가 표시됩니다."
+ },
+ "allowWidgetContentSync": "[차단]을 선택하여 정책 관리 앱이 앱 위젯에 데이터를 저장하지 못하도록 합니다. [허용]을 선택하면 정책 관리 앱 내에서 해당 기능이 지원되고 사용하도록 설정된 경우 정책 관리 앱이 앱 위젯에 데이터를 저장할 수 있습니다. \r\n\r\n \r\n\r\n앱은 앱 구성 정책과 함께 추가 구성 기능을 제공할 수 있습니다. 자세한 내용은 앱 설명서를 참조하세요.",
+ "appSharingFromLevel1": "다음 옵션 중 하나를 선택하여 이 앱이 데이터를 수신할 수 있는 앱을 지정하세요.",
+ "appSharingFromLevel2": "{0}: 다른 정책 관리 앱에서만 조직 문서 또는 계정의 데이터 받기 허용",
+ "appSharingFromLevel3": "{0}: 모든 앱에서 조직 문서 또는 계정의 데이터 받기 허용",
+ "appSharingFromLevel4": "{0}: 모든 앱에서 조직 문서 또는 계정의 데이터 받기 허용 안 함",
+ "appSharingFromLevel5": "{0}: 모든 앱에서의 데이터 전송을 허용하고 사용자 ID 없이 들어오는 모든 데이터를 조직 데이터로 처리합니다.",
+ "appSharingToLevel1": "다음 옵션 중 하나를 선택하여 이 앱이 데이터를 전송할 수 있는 앱을 지정하세요.",
+ "appSharingToLevel2": "{0}: 조직 데이터를 다른 정책 관리 앱으로만 보내기 허용",
+ "appSharingToLevel3": "{0}: 조직 데이터를 모든 앱으로 보내기 허용",
+ "appSharingToLevel4": "{0}: 조직 데이터를 모든 앱으로 보내기 허용 안 함",
+ "appSharingToLevel5": "{0}: 등록된 디바이스의 다른 정책 관리 앱으로의 전송 및 다른 MDM 관리 앱으로의 파일 전송만 허용합니다.",
+ "appSharingToLevel6": "{0}: 다른 정책 관리 앱으로의 전송만 허용하고 OS [여는 위치]/[공유] 대화 상자를 필터링하여 정책 관리 앱만 표시합니다.",
+ "assignmentFilterEdit1": "이 정책에 할당 필터를 적용하면 '모든 디바이스 유형의 앱 대상' 및 '앱' 페이지의 '디바이스 유형'에 대해 지정된 값 외에도 '장치 관리 유형' 속성이 적용됩니다.",
+ "assignmentFilterEdit2": "앱 보호 정책 할당에 대해 자세히 알아보세요.",
+ "conditionalEncryption1": "등록된 디바이스에서 디바이스 암호화가 검색된 경우 내부 앱 스토리지에 대해 앱 암호화를 사용하지 않으려면 {0}을(를) 선택합니다.",
+ "conditionalEncryption2": "참고: Intune은 Intune MDM을 통해서만 디바이스 등록을 검색할 수 있습니다. 외부 앱 스토리지는 관리되지 않는 애플리케이션에서 데이터에 액세스할 수 없도록 여전히 암호화됩니다.",
+ "contactSyncMac": "사용하지 않도록 설정하면 앱이 기본 주소록에 연락처를 저장할 수 없습니다.",
+ "contactsSync": "차단을 선택하여 정책 관리 앱이 기본 앱(연락처, 일정 및 위젯)에 데이터를 저장하지 못하도록 하거나 정책 관리 앱 내에서 추가 기능을 사용하지 못하도록 합니다. 허용을 선택하면 해당 기능이 정책 관리 앱 내에서 지원되어 사용되는 경우, 정책 관리 앱이 기본 앱에 데이터를 저장하거나 추가 기능을 사용할 수 있습니다.
앱은 앱 구성 정책을 통해 추가 구성 기능을 제공할 수 있습니다. 자세한 내용은 앱 설명서를 참조하세요.",
+ "deviceTypeTargetingCreate1": "디바이스 유형 대상이 정책 만들기의 할당 단계로 이동했습니다.",
+ "deviceTypeTargetingEdit1": "이 정책에 할당 필터를 적용하면 '모든 디바이스 유형의 앱 대상' 및 '앱' 페이지의 '디바이스 유형'에 대해 지정된 값 외에도 '장치 관리 유형' 속성이 적용됩니다.",
+ "deviceTypeTargetingEdit2": "장치 관리 유형 대상을 편집하려면 '모든 디바이스 유형의 앱 대상' = '예'를 다시 설정합니다. 그런 다음 '장치 관리 형식'에 대해 원하는 값으로 MAM 할당 필터를 만듭니다.",
+ "deviceTypeTargetingHasMoved": "앱 보호 정책 할당에 대해 자세히 알아보기",
+ "encryptionAndroid1": "Intune 모바일 애플리케이션 관리 정책과 연결된 앱의 경우 Microsoft에서 암호화를 제공합니다. 데이터는 모바일 애플리케이션 관리 정책의 설정에 따라 파일 I/O 작업 동안 동기적으로 암호화됩니다. Android의 관리되는 앱은 플랫폼 암호화 라이브러리를 사용하여 CBC 모드에서 AES-128 암호화를 사용합니다. 이 암호화 방법은 FIPS 140-2를 준수하지 않습니다. SHA-256 암호화는 SigAlg 매개 변수를 사용하는 명시적 명령으로 지원되며 디바이스 4.2 이상에서만 작동합니다. 디바이스 스토리지의 콘텐츠는 항상 암호화됩니다.",
+ "encryptionAndroid2": "앱 정책에서 암호화를 요구하면 최종 사용자는 디바이스에 액세스하기 위해 PIN을 설정하고 사용해야 합니다. 디바이스 액세스를 위해 설정된 PIN이 없으면 앱이 시작되지 않고 최종 사용자에게 “이 애플리케이션에 액세스하려면 회사에서 먼저 디바이스 PIN을 사용하도록 설정해야 합니다.\" 메시지가 표시됩니다.",
+ "encryptionMac1": "Intune 모바일 애플리케이션 관리 정책과 연결된 앱의 경우 Microsoft에서 암호화를 제공합니다. 데이터는 모바일 애플리케이션 관리 정책의 설정에 따라 파일 I/O 작업 동안 동기적으로 암호화됩니다. Mac의 관리되는 앱은 플랫폼 암호화 라이브러리를 사용하여 CBC 모드에서 AES-128 암호화를 사용합니다. 이 암호화 방법은 FIPS 140-2를 준수하지 않습니다. SHA-256 암호화는 SigAlg 매개 변수를 사용하는 명시적 명령으로 지원되며 디바이스 4.2 이상에서만 작동합니다. 디바이스 스토리지의 콘텐츠는 항상 암호화됩니다.",
+ "faceId1": "해당하는 경우 PIN 대신 얼굴 인식 사용을 허용할 수 있습니다. 사용자가 회사 계정으로 이 앱에 액세스하면 얼굴 인식을 제공하라는 메시지가 표시됩니다.",
+ "faceId2": "앱 액세스를 위해 PIN 대신 얼굴 인식을 허용하려면 예를 선택합니다.",
+ "managementLevelsAndroid1": "이 정책이 Android 디바이스 관리자 디바이스, Android Enterprise 디바이스 또는 관리형 디바이스에 적용되는지 여부를 지정하려면 이 옵션을 사용합니다.",
+ "managementLevelsAndroid2": "{0}: 관리되지 않는 디바이스는 Intune MDM 관리가 검색되지 않은 디바이스입니다. 여기에는 타사 MDM 공급업체가 포함됩니다.",
+ "managementLevelsAndroid3": "{0}: Android 디바이스 관리 API를 사용하는 Intune 관리 디바이스입니다.",
+ "managementLevelsAndroid4": "{0}: Android Enterprise 회사 프로필 또는 Android Enterprise 전체 디바이스 관리를 사용하는 Intune 관리 디바이스입니다.",
+ "managementLevelsIos1": "이 정책이 MDM 관리 디바이스 또는 관리되지 않는 디바이스에 적용되는지를 지정하려면 이 옵션을 사용합니다.",
+ "managementLevelsIos2": "{0}: 관리되지 않는 디바이스는 Intune MDM 관리가 검색되지 않은 디바이스입니다. 여기에는 타사 MDM 공급업체가 포함됩니다.",
+ "managementLevelsIos3": "{0}: 관리 디바이스는 Intune MDM에서 관리됩니다.",
+ "minAppVersion": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 필요한 최소 앱 버전 번호를 정의합니다.",
+ "minAppVersionWarning": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 권장되는 최소 앱 버전 번호를 정의합니다.",
+ "minOsVersion": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 필요한 최소 OS 버전 번호를 정의합니다.",
+ "minOsVersionWarning": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 권장되는 최소 OS 버전 번호를 정의합니다.",
+ "minPatchVersion": "사용자가 앱에 안전하게 액세스할 수 있는 최소 필수 Android 보안 패치 레벨을 정의합니다.",
+ "minPatchVersionWarning": "사용자가 앱에 안전하게 액세스할 수 있는 최소 권장 Android 보안 패치 레벨을 정의합니다.",
+ "minSdkVersion": "사용자가 앱에 대한 보안 액세스 권한을 받아야 하는, 필요한 최소 Intune Application Protection Policy SDK 버전을 정의합니다.",
+ "requireAppPinDefault": "
등록된 디바이스에서 디바이스 잠금이 검색되면 예를 선택하여 앱 PIN을 사용하지 않도록 설정하세요.
",
+ "targetAllApps1": "모든 관리 상태의 디바이스에 있는 앱에 대한 정책을 대상으로 하려면 이 옵션을 사용합니다.",
+ "targetAllApps2": "정책 충돌을 해결하는 동안 사용자에게 특정 관리 상태를 대상으로 하는 정책이 있는 경우 이 설정은 대체됩니다.",
+ "touchId2": "앱 액세스를 위해 PIN 대신 지문 ID를 요구하려면 {0}을(를) 선택합니다."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "사용자가 PIN을 재설정해야 하기 전에 지나야 하는 일수를 지정합니다.",
+ "previousPinBlockCount": "이 설정은 Intune에서 유지할 이전 PIN 수를 지정합니다. 새 Pin은 Intune에서 유지 관리하는 PIN과 달라야 합니다."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "이렇게 하면 Windows Search에서 암호화된 데이터를 계속 검색할 수 있습니다.",
+ "authoritativeIpRanges": "Windows의 IP 범위 자동 검색을 재정의하려면 이 설정을 사용하도록 설정합니다.",
+ "authoritativeProxyServers": "Windows의 프록시 서버 자동 검색을 재정의하려면 이 설정을 사용합니다.",
+ "checkInput": "입력의 유효성 확인",
+ "dataRecoveryCert": "복구 인증서는 암호화 키가 손실되었거나 손상된 경우 암호화된 파일을 복구하는 데 사용할 수 있는 특별한 EFS(파일 시스템 암호화) 인증서입니다. 복구 인증서를 만들고 여기서 지정해야 합니다. 자세한 내용은 여기를 참조하세요.",
+ "enterpriseCloudResources": "
회사용으로 처리하고 Windows Information Protection 정책으로 보호할 클라우드 리소스를 지정합니다. '|' 문자로 개별 항목을 구분하여 리소스를 여러 개 지정할 수 있습니다.
회사에 프록시가 구성되어 있는 경우 지정한 클라우드 리소스에 대한 트래픽을 어떤 프록시를 통해 라우트할지 지정할 수 있습니다.
URL[,Proxy]|URL[,Proxy]
프록시를 사용하지 않는 경우: contoso.sharepoint.com|contoso.visualstudio.com 프록시를 사용하는 경우: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
회사 네트워크를 구성하는 IPv4 범위를 지정합니다. 이러한 범위는 회사 네트워크 경계를 정의하기 위해 지정하는 엔터프라이즈 네트워크 도메인 이름과 함께 사용됩니다.
이 설정을 사용하려면 Windows Information Protection을 사용하도록 설정해야 합니다.
회사 네트워크를 구성하는 DNS 이름을 지정합니다. 이러한 이름은 회사 네트워크 경계를 정의하기 위해 지정하는 IP 범위와 함께 사용됩니다. 쉼표로 개별 항목을 구분하여 값을 여러 개 지정할 수 있습니다.
이 설정을 사용하려면 Windows Information Protection을 사용하도록 설정해야 합니다.
예: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
기업 네트워크를 형성하는 DNS 이름을 지정합니다. 이 이름은 기업 네트워크 경계를 정의하는 IP 범위와 함께 사용됩니다. '|' 문자로 개별 항목을 구분하여 여러 개의 값을 지정할 수 있습니다.
이 설정을 사용하려면 Windows Information Protection을 활성화해야 합니다.
예: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
회사 네트워크에 외부 대상 프록시가 있는 경우 여기에서 지정합니다. 프록시 서버 주소를 지정하는 경우 트래픽을 허용하고 Windows Information Protection을 통해 보호할 포트도 지정해야 합니다.
참고: 이 목록은 [엔터프라이즈 내부 프록시 서버] 목록에 있는 서버를 포함해서는 안 됩니다. 세미콜론으로 개별 항목을 구분하여 값을 여러 개 지정할 수 있습니다.
예: proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "디바이스가 유휴 상태로 전환된 후 디바이스의 PIN 또는 암호가 잠기게 되는 최대 허용 시간(분)을 지정합니다. 사용자는 설정 앱에 지정된 최대 시간보다 적은 기존 시간 제한 값을 선택할 수 있습니다. Lumia 950 및 950XL의 경우, 이 정책으로 설정된 값에 상관없이 최대 시간 제한 값이 5분입니다.",
+ "maxInactivityTime2": "0(기본값) - 시간 제한이 정의되지 않았습니다. 기본값 '0'은 '시간 제한이 정의되지 않음'으로 해석됩니다.",
+ "maxPasswordAttempts1": "이 정책은 모바일 디바이스 및 데스크톱에서 다양하게 동작합니다.",
+ "maxPasswordAttempts2": "모바일 디바이스에서는 사용자가 이 정책에 의해 설정된 값에 도달하면 디바이스가 초기화됩니다.",
+ "maxPasswordAttempts3": "데스크톱에서는 사용자가 이 정책에 의해 설정된 값에 도달하면 초기화되지 않습니다. 대신 데스크톱은 BitLocker 복구 모드로 전환되어 데이터가 액세스할 수는 없지만 복구는 가능한 상태가 됩니다. BitLocker를 사용하도록 설정하지 않은 경우 정책을 적용할 수 없습니다.",
+ "maxPasswordAttempts4": "사용자는 실패한 시도 횟수 제한에 도달하기 전에 잠금 화면으로 전환되고 그 이상 실패하면 컴퓨터가 잠기게 된다는 경고를 받습니다. 사용자가 제한에 도달하면 디바이스가 자동으로 다시 부팅되고 BitLocker 복구 페이지가 표시됩니다. 이 페이지에서는 사용자에게 BitLocker 복구 키를 입력하라는 메시지를 표시합니다.",
+ "maxPasswordAttempts5": "0(기본값) - PIN 또는 암호를 잘못 입력하면 디바이스가 초기화되지 않습니다.",
+ "maxPasswordAttempts6": "모든 정책 값이 0인 경우 가장 안전한 값은 0입니다. 그렇지 않은 경우 최소 정책 값이 가장 안전한 값입니다.",
+ "mdmDiscoveryUrl": "MDM에 등록하는 사용자가 사용할 MDM 등록 엔드포인트에 대한 URL을 지정합니다. 기본적으로 이 URL은 Intune에 대해 지정됩니다.",
+ "minimumPinLength1": "PIN에 대해 필요한 최소 문자 수를 설정하는 정수 값입니다. 기본값은 4입니다. 이 정책 설정에 대해 구성할 수 있는 가장 적은 수는 4입니다. 구성할 수 있는 가장 큰 수는 최대 PIN 길이 정책 설정에 구성된 수 또는 127(둘 중 적은 수)보다 작아야 합니다.",
+ "minimumPinLength2": "이 정책 설정을 구성하는 경우 PIN 길이는 이 숫자보다 크거나 같아야 합니다. 이 정책 설정을 사용하지 않거나 구성하지 않는 경우 PIN 길이는 4보다 크기가 같아야 합니다.",
+ "name": "이 네트워크 경계의 이름",
+ "neutralResources": "
회사에 인증 리디렉션 엔드포인트가 있으면 여기에 지정합니다. 여기에 지정된 위치는 리디렉션 이전의 연결 컨텍스트에 따라 개인용 또는 회사용으로 간주됩니다.
쉼표로 개별 항목을 구분하여 값을 여러 개 지정할 수 있습니다.
예: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Windows에 로그인하는 방법으로 비즈니스용 Windows Hello를 설정하는 값입니다.",
+ "passportForWork2": "기본값은 true입니다. 이 정책을 false로 설정하는 경우 사용자는 프로비전이 필요한 Microsoft Entra 연결 모바일 휴대폰을 제외하고 비즈니스용 Windows Hello를 프로비전할 수 없습니다.",
+ "pinExpiration": "이 정책 설정에 대해 구성할 수 있는 가장 큰 수는 730입니다. 이 정책 설정에 대해 구성할 수 있는 가장 작은 수는 0입니다. 이 정책을 0으로 설정하면 사용자의 PIN이 만료되지 않습니다.",
+ "pinHistory1": "이 정책 설정에 대해 구성할 수 있는 가장 큰 수는 50입니다. 이 정책 설정에 대해 구성할 수 있는 가장 작은 수는 0입니다. 이 정책을 0으로 설정하면 이전 PIN의 스토리지가 필요하지 않습니다.",
+ "pinHistory2": "사용자의 현재 PIN은 사용자 계정과 연결된 PIN 집합에 포함됩니다. PIN 기록이 PIN 초기화를 통해 유지되지 않습니다.",
+ "protectUnderLock": "디바이스가 잠긴 상태인 동안 앱 콘텐츠를 보호합니다.",
+ "protectionModeBlock": "
차단: 엔터프라이즈 데이터가 보호된 앱에서 나갈 수 없도록 차단합니다.
",
+ "protectionModeOff": "
재정의 허용: 사용자가 보호된 앱에서 보호되지 않은 앱으로 데이터를 재배치하려고 할 때 메시지가 표시됩니다. 이 프롬프트를 재정의하도록 선택하면 작업이 기록됩니다.
",
+ "protectionModeOverride": "
재정의 허용: 사용자가 보호된 앱에서 보호되지 않은 앱으로 데이터를 재배치하려고 할 때 메시지가 표시됩니다. 이 프롬프트를 재정의하도록 선택하면 작업이 기록됩니다.
",
+ "protectionModeSilent": "
자동: 사용자가 보호된 앱에서 데이터를 재배치할 수 있습니다. 이러한 작업은 기록됩니다.
",
+ "required": "필요한 공간",
+ "revokeOnMdmHandoff": "Windows 10, 버전 1703에서 추가되었습니다. 이 정책은 디바이스가 MAM에서 MDM으로 업그레이드될 때 WIP 키를 취소할지 여부를 제어합니다. “끄기”로 설정하면 키가 취소되지 않으며 사용자는 업그레이드 후에도 보호된 파일에 계속 액세스할 수 있습니다. MDM 서비스가 MAM 서비스와 동일한 WIP EnterpriseID로 구성된 경우에 권장됩니다.",
+ "revokeOnUnenroll": "그러면 디바이스가 이 정책에서 등록 취소될 때 암호화 키가 해지됩니다.",
+ "rmsTemplateForEdp": "RMS 암호화에 대해 사용할 TemplateID GUID입니다. Azure RMS 템플릿을 통해 IT 관리자는 RMS로 보호된 파일에 액세스할 수 있는 사람과 액세스 가능한 기간에 대한 세부 정보를 구성할 수 있습니다.",
+ "showWipIcon": "회사 컨텍스트에서 작업할 때 아이콘을 겹쳐서 표시하여 사용자에게 알립니다.",
+ "useRmsForWip": "WIP에 대해 Azure RMS 암호화를 허용할지를 지정합니다."
+ },
+ "requireAppPin": "
등록된 디바이스에서 디바이스 잠금이 검색되면 예를 선택하여 앱 PIN을 사용하지 않도록 설정하세요.
참고: Intune은 iOS/iPadOS에서 타사 EMM 솔루션을 사용하여 디바이스 등록을 검색할 수 없습니다.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "사용자 지정 스크립트 만들기",
+ "edit": "사용자 지정 스크립트 편집"
+ },
+ "basicInfo": "작성한 검색 및 재구성 스크립트에서 새 사용자 지정 스크립트 패키지를 만듭니다.",
+ "customScriptCapitalized": "사용자 지정 스크립트",
+ "customScriptLowercase": "사용자 지정 스크립트",
+ "detectionScript": "검색 스크립트"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "기본값",
+ "header": "업데이트 우선 순위",
+ "postponed": "연기됨",
+ "priority": "높은 우선 순위"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "자동 업데이트",
+ "sublabel": "대체된 앱을 회사 포털 사용자가 설치한 경우 대체하는 앱을 설치해야 합니다."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "배경",
+ "displayText": "{0}에서 콘텐츠 다운로드",
+ "foreground": "전경",
+ "header": "배달 최적화 우선 순위"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "사용자가 다시 시작 알림을 다시 알리도록 허용",
+ "countdownDialog": "다시 시작하기 전에 카운트다운 다시 시작 대화 상자를 표시할 시간(분) 선택",
+ "durationInMinutes": "디바이스 다시 시작 유예 기간(분)",
+ "snoozeDurationInMinutes": "다시 알림 기간(분) 선택"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "표준 시간대",
+ "local": "디바이스 표준 시간대",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "날짜 및 시간",
+ "deadlineTimeColumnLabel": "설치 최종 기한",
+ "deadlineTimeDatePickerErrorMessage": "선택한 날짜는 사용 가능한 날짜 이후여야 합니다.",
+ "deadlineTimeLabel": "앱 설치 최종 기한",
+ "defaultTime": "가능하면 빨리",
+ "infoText": "이 애플리케이션은 배포된 후 바로 사용할 수 있지만 아래에서 사용 가능 시간을 지정하는 경우는 예외입니다. 필수 애플리케이션인 경우 최종 설치 기한을 지정할 수 있습니다.",
+ "specificTime": "특정 날짜 및 시간",
+ "startTimeColumnLabel": "사용 가능",
+ "startTimeDatePickerErrorMessage": "선택한 날짜는 마감 날짜 이전이어야 합니다.",
+ "startTimeLabel": "앱 가용성"
+ },
+ "restartGracePeriodHeader": "유예 기간 다시 시작",
+ "restartGracePeriodLabel": "디바이스 다시 시작 유예 기간",
+ "summaryTitle": "최종 사용자 환경"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "하나 이상의 그룹에 사용자 지정 특성을 할당합니다. 할당을 편집하려면 [속성]으로 이동합니다.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "셸 스크립트",
"successfullySavedPolicy": "{0}을(를) 저장함"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64비트",
+ "thirtyTwoBit": "32비트"
+ },
+ "Countries": {
+ "ae": "아랍에미리트",
+ "ag": "앤티가 바부다",
+ "ai": "앵귈라",
+ "al": "알바니아",
+ "am": "아르메니아",
+ "ao": "앙골라",
+ "ar": "아르헨티나",
+ "at": "오스트리아",
+ "au": "오스트레일리아",
+ "az": "아제르바이잔",
+ "bb": "바베이도스",
+ "be": "벨기에",
+ "bf": "부르키나파소",
+ "bg": "불가리아",
+ "bh": "바레인",
+ "bj": "베냉",
+ "bm": "버뮤다",
+ "bn": "브루나이",
+ "bo": "볼리비아",
+ "br": "브라질",
+ "bs": "바하마",
+ "bt": "부탄",
+ "bw": "보츠와나",
+ "by": "벨라루스",
+ "bz": "벨리즈",
+ "ca": "캐나다",
+ "cg": "콩고 공화국",
+ "ch": "스위스",
+ "cl": "칠레",
+ "cn": "중국",
+ "co": "콜롬비아",
+ "cr": "코스타리카",
+ "cv": "카보베르데",
+ "cy": "키프로스",
+ "cz": "체코 공화국",
+ "de": "독일",
+ "dk": "덴마크",
+ "dm": "도미니카",
+ "do": "도미니카 공화국",
+ "dz": "알제리",
+ "ec": "에콰도르",
+ "ee": "에스토니아",
+ "eg": "이집트",
+ "es": "스페인",
+ "fi": "핀란드",
+ "fj": "피지",
+ "fm": "미크로네시아",
+ "fr": "프랑스",
+ "gb": "영국",
+ "gd": "그레나다",
+ "gh": "가나",
+ "gm": "감비아",
+ "gr": "그리스",
+ "gt": "과테말라",
+ "gw": "기니비사우",
+ "gy": "가이아나",
+ "hk": "홍콩",
+ "hn": "온두라스",
+ "hr": "크로아티아",
+ "hu": "헝가리",
+ "id": "인도네시아",
+ "ie": "아일랜드",
+ "il": "이스라엘",
+ "in": "인도",
+ "is": "아이슬란드",
+ "it": "이탈리아",
+ "jm": "자메이카",
+ "jo": "요르단",
+ "jp": "일본",
+ "ke": "케냐",
+ "kg": "키르기스스탄",
+ "kh": "캄보디아",
+ "kn": "세인트키츠 네비스",
+ "kr": "대한민국",
+ "kw": "쿠웨이트",
+ "ky": "케이맨 제도",
+ "kz": "카자흐스탄",
+ "la": "라오스",
+ "lb": "레바논",
+ "lc": "세인트 루시아",
+ "lk": "스리랑카",
+ "lr": "라이베리아",
+ "lt": "리투아니아",
+ "lu": "룩셈부르크",
+ "lv": "라트비아",
+ "md": "몰도바 공화국",
+ "mg": "마다가스카르",
+ "mk": "북마케도니아",
+ "ml": "말리",
+ "mn": "몽골",
+ "mo": "마카오",
+ "mr": "모리타니",
+ "ms": "몬트세라트",
+ "mt": "몰타",
+ "mu": "모리셔스",
+ "mw": "말라위",
+ "mx": "멕시코",
+ "my": "말레이시아",
+ "mz": "모잠비크",
+ "na": "나미비아",
+ "ne": "니제르",
+ "ng": "나이지리아",
+ "ni": "니카라과",
+ "nl": "네덜란드",
+ "no": "노르웨이",
+ "np": "네팔",
+ "nz": "뉴질랜드",
+ "om": "오만",
+ "pa": "파나마",
+ "pe": "페루",
+ "pg": "파푸아뉴기니",
+ "ph": "필리핀",
+ "pk": "파키스탄",
+ "pl": "폴란드",
+ "pt": "포르투갈",
+ "pw": "팔라우",
+ "py": "파라과이",
+ "qa": "카타르",
+ "ro": "루마니아",
+ "ru": "러시아",
+ "sa": "사우디아라비아",
+ "sb": "솔로몬 제도",
+ "sc": "세이셸",
+ "se": "스웨덴",
+ "sg": "싱가포르",
+ "si": "슬로베니아",
+ "sk": "슬로바키아",
+ "sl": "시에라리온",
+ "sn": "세네갈",
+ "sr": "수리남",
+ "st": "상투메 프린시페",
+ "sv": "엘살바도르",
+ "sz": "스와질란드",
+ "tc": "터크스 케이커스",
+ "td": "차드",
+ "th": "태국",
+ "tj": "타지키스탄",
+ "tm": "투르크메니스탄",
+ "tn": "튀니지",
+ "tr": "터키",
+ "tt": "트리니다드 토바고",
+ "tw": "대만",
+ "tz": "탄자니아",
+ "ua": "우크라이나",
+ "ug": "우간다",
+ "us": "미국",
+ "uy": "우루과이",
+ "uz": "우즈베키스탄",
+ "vc": "세인트 빈센트 그레나딘",
+ "ve": "베네수엘라",
+ "vg": "영국령 버진 아일랜드",
+ "vn": "베트남",
+ "ye": "예멘",
+ "za": "남아프리카 공화국",
+ "zw": "짐바브웨"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "이 설정은 설정 카탈로그에서 사용할 수 있으므로 OMA-URI를 통해 구성할 수 없습니다. 이 설정을 구성하려면 설정 카탈로그로 이동하세요."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "구성 프로필 파일 선택"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "이러한 설정은 디바이스 등록을 통해 사용자의 승인을 받거나 받지 않고 디바이스에는 물론, 자동화된 디바이스 등록(이전의 DEP)을 통해 등록된 디바이스에도 적용됩니다.",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "디바이스 등록 및 자동 디바이스 등록",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "디바이스 등록 및 자동 디바이스 등록",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "완전 관리형 디바이스에서 Microsoft Launcher를 구성합니다.",
+ "deviceExperienceTypeDescription": "구성하려는 환경에 따라 키오스크 모드 또는 Microsoft 시작 관리자를 선택하여 디바이스에서 환경 구성을 시작합니다. 디바이스 환경 유형을 선택하지 않으면 사용자에게 디바이스의 기본 홈 화면 환경이 표시됩니다.",
+ "deviceExperienceTypeKioskMode": "키오스크 모드(전용 및 완전 관리형)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Microsoft Launcher를 사용하여 조직에서 관리하는 디바이스에 대한 홈 화면 환경을 사용자 지정합니다. Microsoft Launcher를 기본 시작 관리자로 설정하면 디바이스 사용자가 다른 시작 관리자를 사용할 수 없게 됩니다.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Microsoft Launcher를 기본 시작 관리자로 설정",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft 시작 관리자(완전 관리형 전용)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "허용하지 않는 한 사용자가 배경 무늬를 변경할 수 없습니다. 이 설정은 사용자 지정 배경 무늬를 구성한 경우에만 사용할 수 있습니다.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "사용자가 배경 화면을 수정하도록 허용",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "자체 이미지를 홈 화면 배경 무늬로 적용하고 사용자가 변경할 수 있는지 여부를 선택합니다. 사용자 지정 배경 무늬를 구성하지 않으면 디바이스가 현재 배경 무늬를 유지합니다.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "사용자 지정 배경 화면 구성",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "이 이미지는 디바이스 홈 화면에 배경 무늬로 나타납니다. 이 필드는 사용자 지정 배경 무늬를 구성한 경우에만 사용할 수 있습니다.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "배경 화면 이미지의 URL 입력",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "사용 안 함",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "숨기기",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "표시",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "사용자가 도크의 현재 상태를 변경할 수 있도록 허용하면 이전 설정이 초기 배포에 적용됩니다. 후속 배포의 경우 사용자가 변경한 내용이 반영되도록 설정이 적용되지 않습니다. 이 설정은 도크의 현재 상태를 구성하는 경우에만 사용할 수 있습니다.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "사용자가 도크 상태를 변경하도록 허용",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "도킹은 디바이스 사용자가 자신의 앱 및 도구에 빠르게 액세스할 수 있도록 하는 메뉴입니다. 이 메뉴가 숨겨진 경우 사용자는 메뉴를 위로 살짝 밀어 액세스해야 합니다.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "도킹 상태",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "사용자가 피드의 사용/사용 안 함을 설정하도록 허용하면 이전 설정이 초기 배포에 적용됩니다. 후속 배포의 경우 사용자가 변경한 내용이 반영되도록 설정이 적용되지 않습니다. 이 설정은 시작 관리자 피드를 사용하도록 설정하는 경우에만 사용할 수 있습니다.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "사용자가 피드 사용/사용 안 함을 설정하도록 허용",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "피드는 디바이스 사용자가 자신의 일정, 문서 및 최근 활동에 액세스할 수 있는 홈 화면 오른쪽의 추가 화면입니다. 사용하도록 설정하지 않으면 사용하지 않는 상태로 유지됩니다. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "시작 관리자 피드 사용",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "검색 창 배치",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "맨 아래",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "숨기기",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "맨 위",
+ "deviceExperienceTypeName": "디바이스 환경 유형",
"deviceGuardCredentialGuardDescription": "UEFI 잠금을 사용하여 활성화하면 Credential Guard를 원격으로 비활성화할 수 없습니다. UEFI 잠금을 사용하지 않고 활성화하면 그룹 정책을 통해 원격으로 Credential Guard를 비활성화할 수 있습니다.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune 디바이스 ID",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "활성 시간 이외의 시간으로 예약된 자동 다시 시작에서 사용자가 예약해야 하는 개입형 다시 시작으로 전환하기 전의 일수입니다.",
"engagedRestartTransitionScheduleName": "자동 다시 시작 후 사용자를 개입형 다시 시작으로 전환(일)",
"enhancedOption": "향상된 기능(1903 및 이전)",
- "enrollmentProfileTypeDedicatedDevice": "전용 디바이스",
- "enrollmentProfileTypeDescription": "디바이스에서 Microsoft Launcher 또는 Microsoft Managed Home Screen 구성을 시작하려면 등록 프로필 유형을 선택합니다. 프로필 유형을 선택하지 않으면 사용자에게 디바이스의 기본 홈 화면 환경이 표시됩니다.",
- "enrollmentProfileTypeFullyManaged": "완전 관리형",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "완전 관리형 디바이스에서 Microsoft Launcher를 구성합니다.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Microsoft Launcher를 사용하여 조직에서 관리하는 디바이스에 대한 홈 화면 환경을 사용자 지정합니다. Microsoft Launcher를 기본 시작 관리자로 설정하면 디바이스 사용자가 다른 시작 관리자를 사용할 수 없게 됩니다.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Microsoft Launcher를 기본 시작 관리자로 설정",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "사용자가 배경 화면을 수정하도록 허용",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "자체 이미지를 홈 화면 배경 무늬로 적용하고 사용자가 변경할 수 있는지 여부를 선택합니다. 사용자 지정 배경 무늬를 구성하지 않으면 디바이스가 현재 배경 무늬를 유지합니다.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "사용자 지정 배경 화면 구성",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "이 이미지는 디바이스 홈 화면에 배경 무늬로 나타납니다. 이 필드는 사용자 지정 배경 무늬를 구성한 경우에만 사용할 수 있습니다.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "배경 화면 이미지의 URL 입력",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "사용 안 함",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "숨기기",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "표시",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "도킹은 디바이스 사용자가 자신의 앱 및 도구에 빠르게 액세스할 수 있도록 하는 메뉴입니다. 이 메뉴가 숨겨진 경우 사용자는 메뉴를 위로 살짝 밀어 액세스해야 합니다.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "도킹 상태",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "사용자가 피드 사용/사용 안 함을 설정하도록 허용",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "피드는 디바이스 사용자가 자신의 일정, 문서 및 최근 활동에 액세스할 수 있는 홈 화면 오른쪽의 추가 화면입니다. 사용하도록 설정하지 않으면 사용하지 않는 상태로 유지됩니다. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "시작 관리자 피드 사용",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "검색 창 배치",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "아래쪽",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "숨기기",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "위쪽",
- "enrollmentProfileTypeName": "등록 프로필 유형",
"enrollmentSettingsHeading": "등록 설정",
"enterOnlyOneForDns": "DNS 서버 및/또는 프록시 서버의 목록을 입력합니다.",
"enterpriseModeLoggingExample": "예: http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "완전 관리형 및 회사 소유 회사 프로필 장치",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "이러한 설정은 완전 관리형 및 전용 디바이스에서만 작동합니다.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "완전 관리형 전용 디바이스",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "이러한 설정은 키오스크 정책을 사용하여 작동하는 완전 관리형 및 전용 디바이스에서만 작동합니다.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "완전 관리형 및 전용 디바이스(키오스크 모드에만 해당)",
"gameCenterBlockedMacDescription": "예 Game Center를 사용하지 않도록 설정하면 Game Center 아이콘은 홈 화면에서 제거됩니다. MacOS 버전 10.13 이상을 실행하는 디바이스에서 사용할 수 있습니다.",
"gameCenterBlockedMacName": "Game Center 차단",
"gamingPageDescription": "[설정] 앱에서 게임에 대한 액세스를 차단합니다.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "이 키오스크 디바이스의 애플리케이션에 액세스할 로그온 유형을 구성합니다.",
"kioskShowTaskbarDesc": "키오스크에 Windows 작업 표시줄을 표시하거나 숨깁니다.",
"kioskShowTaskbarName": "Windows 작업 표시줄",
+ "kioskSingleInfoBoxText": "단일 앱 키오스크 모드 – 선택한 앱 실행을 위해 디바이스 잠금 이 모드를 사용하려면 먼저 클라이언트 앱 워크로드에서 선택한 앱을 승인하고 할당해야 합니다. 완전 관리형 디바이스에서 적용할 선택된 앱은 관리 홈 화면뿐입니다. 다른 모든 앱은 대신 필수 앱으로 처리됩니다.",
"kioskStartDateTime": "유지 관리 기간 시작 시간",
"kioskStartMenuLayoutXmlDesc": "앱이 [시작] 메뉴에 표시되는 순서를 정의하는 XML 레이아웃을 제공합니다.",
"kioskStartMenuLayoutXmlDescV2": "시작 레이아웃을 구성하는 XML 파일을 가져오면 기존 표시 순서 및 타일 크기 선택이 재정의됩니다. 자세한 정보",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "유효한 파일 경로여야 합니다.",
"mustBeAValidHttpsUrl": "유효한 https url이어야 합니다.",
"mustBeAValidIPAddress": "유효한 IP 주소(예: 192.168.0.1 또는 2001:0db8:85a3:0000:0000:8a2e:0370:7334)여야 합니다.",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "값은 유효한 IP 주소이거나 선택적 포트 번호가 있는 FQDN이어야 합니다.",
"mustBeAValidIPv4Address": "유효한 IPv4 주소여야 합니다(예: 192.168.0.1).",
"mustBeAValidIPv6Address": "유효한 IPv6 주소(예: 2001:0db8:85a3:0000:0000:8a2e:0370:7334)여야 합니다.",
"mustBeAValidImageUrl": "유효한 이미지 URL(예: www.contoso.com/image.jpg)이어야 합니다.",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "로컬 저장소의 Windows 방화벽 규칙(공용 네트워크)",
"publicNetworkName": "공용(검색 불가능) 네트워크",
"publicOutboundConnectionsSummaryLabel": "아웃바운드 연결에 대한 기본 작업(공용 네트워크)",
- "publicPlayStoreEnabledDescription": "클라이언트 앱에서 제거를 요구한 앱을 제외하고, 사용자가 모든 앱에 대한 액세스 권한을 받습니다. 이 설정을 \"구성하지 않음\"으로 선택하면 사용자는 클라이언트 앱에서 [사용 가능] 또는 [필수]로 나열한 앱에만 액세스할 수 있습니다.",
+ "publicPlayStoreEnabledDescription": "\"허용\"을 선택하면 사용자가 클라이언트 앱에서 제거해야 하는 앱을 제외한 모든 앱에 액세스할 수 있습니다. 이 설정에 대해 \"차단\" 또는 \"구성되지 않음\"을 선택하는 경우 사용자는 클라이언트 앱에서 사용 가능하거나 필수로 나열된 앱에만 액세스할 수 있습니다.",
"publicPlayStoreEnabledName": "Google Play 스토어의 모든 앱에 액세스 허용",
- "publicPlayStoreEnabledWarning": "\"허용\"을 선택하면 사용자가 Google Play Store에서 앱을 설치할 수 있습니다. 나중에 선택 항목을 \"구성되지 않음\"으로 변경하면 사용자에게 명시적으로 허용되지 않는 모든 프로그램이 장치에서 제거됩니다.",
+ "publicPlayStoreEnabledWarning": "\"허용\"을 선택하면 사용자는 Google Play 스토어에서 모든 앱을 설치할 수 있습니다. 나중에 선택을 \"차단\" 또는 \"구성되지 않음\"으로 변경하면 클라이언트 앱에서 사용 가능하거나 필수로 나열한 앱을 제외한 모든 앱이 장치에서 제거됩니다.",
+ "publicPlayStoreSelectionAllowList": "차단",
+ "publicPlayStoreSelectionBlockList": "허용",
+ "publicPlayStoreSelectionNotConfigured": "구성되지 않음",
"publicShieldedSummaryLabel": "차폐(공용 네트워크)",
"publicStealthModeSummaryLabel": "은폐 모드(공용 네트워크)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "멀티캐스트 브로드캐스트에 대한 유니캐스트 응답(공용 네트워크)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "삭제하는 중...",
"photoLibrary": "사진 라이브러리",
"pinCharSettingTooltip": "숫자 PIN은 숫자만 허용합니다.\r\n\r\n암호에는 영숫자 문자와 허용된 기호가 모두 필요합니다.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "중요: 2024년 6월 1일부터 17.7.0 이전 SDK를 사용하는 앱은 더 이상 앱 보호 정책 업데이트가 제공되지 않으며 사용자가 앱을 실행할 수 없게 됩니다. 사용자가 앱을 업데이트하고 있으며 LOB(기간 업무) 앱에서 최근 SDK 또는 래퍼를 사용하고 있는지 확인하세요. 자세한 정보",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "플랫폼",
"platformDropDownLabel": "플랫폼",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "디바이스",
"licenseTypeUser": "사용자"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "속성",
- "rule": "규칙",
- "ruleDetails": "규칙 정보",
- "value": "값"
- },
- "assignIf": "다음과 같은 경우 프로필 할당",
- "deleteWarning": "선택한 적용 가능성 규칙이 삭제됩니다.",
- "dontAssignIf": "다음과 같은 경우 프로필을 할당하지 않음",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "및 추가 {0}개",
- "instructions": "할당된 그룹 내에서 이 프로필을 적용하는 방법을 지정합니다. Intune은 이러한 규칙의 결합된 조건을 충족하는 디바이스에만 프로필을 적용합니다.",
- "maxText": "최대",
- "minText": "최소",
- "noActionRow": "적용 가능성 규칙이 지정되지 않음",
- "oSVersion": "예: 1.2.3.4",
- "toText": "끝",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise KN",
- "windows10HolographicEnterprise": "비즈니스용 Windows 10 홀로그래픽",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home Kn",
- "windows10HomeSingleLanguage": "Windows 10/11 Home 단일 언어",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "OS 버전",
- "windows10OsVersion": "OS 버전",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "같음",
- "greaterThan": "보다 큼",
- "greaterThanOrEqualTo": "크거나 같음",
- "lessThan": "보다 작음",
- "lessThanOrEqualTo": "작거나 같음",
- "notEqualTo": "같지 않음"
- },
- "CustomScript": {
- "enforceSignatureCheck": "스크립트 서명 확인 적용 및 자동으로 스크립트 실행",
- "enforceSignatureCheckTooltip": "스크립트가 신뢰할 수 있는 게시자에 의해 서명되었는지 확인하려면 '예'를 선택합니다(경고나 메시지가 표시되지 않고 스크립트가 실행되도록 함). 스크립트가 차단 해제된 상태로 실행됩니다. 서명 확인 없이 최종 사용자 확인으로 스크립트를 실행하려면 '아니요'(기본값)를 선택합니다.",
- "header": "사용자 지정 검색 스크립트 사용",
- "runAs32Bit": "64비트 클라이언트에서 32비트 프로세스로 스크립트 실행",
- "runAs32BitTooltip": "64비트 클라이언트에서 32비트 프로세스로 스크립트를 실행하려면 '예'를 선택합니다. 64비트 클라이언트에서 64비트 프로세스로 스크립트를 실행하려면 '아니요'(기본값)를 선택합니다. 32비트 클라이언트는 32비트 프로세스로 스크립트를 실행합니다.",
- "scriptContent": "스크립트 콘텐츠",
- "scriptFile": "스크립트 파일",
- "scriptFileNotSelectedValidation": "스크립트 파일이 선택되지 않았습니다.",
- "scriptFileTooltip": "클라이언트에서 앱의 존재를 검색하는 PowerShell 스크립트를 선택합니다. 스크립트가 0 값 종료 코드를 반환하고 STDOUT에 문자열 값을 쓰면 앱이 검색됩니다.",
- "scriptSizeLimitValidation": "검색 스크립트가 허용되는 최대 크기를 초과합니다. 검색 스크립트의 크기를 줄여 이 문제를 해결합니다."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "만든 날짜",
- "dateModified": "수정한 날짜",
- "doesNotExist": "파일 또는 폴더 가 없습니다.",
- "fileOrFolderExists": "파일 또는 폴더가 있음",
- "sizeInMB": "크기(MB)",
- "version": "문자열(버전)"
- },
- "associatedWith32Bit": "64비트 클라이언트에서 32비트 앱과 연결됨",
- "associatedWith32BitTooltip": "64비트 클라이언트에서 32비트 컨텍스트에서 경로 환경 변수를 확장하려면 '예'를 선택합니다. 64비트 클라이언트에서 64비트 컨텍스트에서 경로 변수를 확장하려면 '아니요'(기본값)를 선택합니다. 32비트 클라이언트에서는 항상 32비트 컨텍스트가 사용됩니다.",
- "detectionMethod": "검색 방법",
- "detectionMethodTooltip": "앱의 존재 유효성을 검사하는 데 사용되는 검색 방법 유형을 선택합니다.",
- "fileOrFolder": "파일 또는 폴더",
- "fileOrFolderToolTip": "검색할 파일 또는 폴더입니다.",
- "operator": "연산자",
- "operatorTooltip": "비교의 유효성을 검사하는 데 사용되는 검색 방법의 연산자를 선택합니다.",
- "path": "경로",
- "pathTooltip": "검색할 파일 또는 폴더를 포함하는 폴더의 전체 경로입니다.",
- "value": "값",
- "valueTooltip": "선택한 검색 방법과 일치하는 값을 선택합니다. 데이터 검색 방법은 현지 시간으로 입력해야 합니다."
- },
- "GridColumns": {
- "pathOrCode": "경로/코드",
- "type": "종류"
- },
- "MsiRule": {
- "operator": "연산자",
- "operatorTooltip": "MSI 제품 버전 유효성 검사 비교의 연산자를 선택합니다.",
- "productCode": "MSI 제품 코드",
- "productCodeTooltip": "앱에 대해 유효한 MSI 제품 코드입니다.",
- "productVersion": "값",
- "productVersionCheck": "MSI 제품 버전 확인",
- "productVersionCheckTooltip": "MSI 제품 코드 외에 MSI 제품 버전을 확인하려면 '예'를 선택합니다.",
- "productVersionTooltip": "앱의 MSI 제품 버전을 입력합니다."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "정수 비교",
- "keyDoesNotExist": "키가 없음",
- "keyExists": "키가 있음",
- "stringComparison": "문자열 비교",
- "valueDoesNotExist": "값이 없음",
- "valueExists": "값이 있음",
- "versionComparison": "버전 비교"
- },
- "associatedWith32Bit": "64비트 클라이언트에서 32비트 앱과 연결됨",
- "associatedWith32BitTooltip": "64비트 클라이언트에서 32비트 레지스트리를 검색하려면 '예'를 선택합니다. 64비트 클라이언트에서 64비트 레지스트리를 검색하려면 '아니요'(기본값)를 선택합니다. 32비트 클라이언트는 항상 32비트 레지스트리를 검색합니다.",
- "detectionMethod": "검색 방법",
- "detectionMethodTooltip": "앱의 존재 유효성을 검사하는 데 사용되는 검색 방법 유형을 선택합니다.",
- "keyPath": "키 경로",
- "keyPathTooltip": "검색할 값을 포함하는 레지스트리 항목의 전체 경로입니다.",
- "operator": "연산자",
- "operatorTooltip": "비교의 유효성을 검사하는 데 사용되는 검색 방법의 연산자를 선택합니다.",
- "value": "값",
- "valueName": "값 이름",
- "valueNameTooltip": "검색할 레지스트리 값의 이름입니다.",
- "valueTooltip": "선택한 검색 방법과 일치하는 값을 선택합니다."
- },
- "RuleTypeOptions": {
- "file": "파일",
- "mSI": "MSI",
- "registry": "레지스트리"
- },
- "gridAriaLabel": "검색 규칙",
- "header": "앱의 존재를 나타내는 규칙을 만듭니다.",
- "noRulesSelectedPlaceholder": "규칙이 지정되지 않았습니다.",
- "ruleTableLimit": "검색 규칙은 최대 25개까지 추가할 수 있음",
- "ruleType": "규칙 유형",
- "ruleTypeTooltip": "추가할 검색 규칙 유형을 선택합니다."
- },
- "RuleConfigurationOptions": {
- "customScript": "사용자 지정 검색 스크립트 사용",
- "manual": "수동으로 검색 규칙 구성"
- },
- "bladeTitle": "검색 규칙",
- "header": "앱의 존재를 검색하는 데 사용되는 앱 관련 규칙을 구성합니다.",
- "rulesFormat": "규칙 형식",
- "rulesFormatTooltip": "수동으로 검색 규칙을 구성하도록 선택하거나 사용자 지정 스크립트를 사용하여 앱의 존재를 검색하도록 선택합니다.",
- "selectorLabel": "검색 규칙"
+ "BooleanActions": {
+ "allow": "허용",
+ "block": "차단",
+ "configured": "구성됨",
+ "disable": "사용 안 함",
+ "dontRequire": "필요 없음",
+ "enable": "사용",
+ "hide": "숨기기",
+ "limit": "제한",
+ "notConfigured": "구성되지 않음",
+ "require": "필요",
+ "show": "표시",
+ "yes": "예"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge 앱 권장 SmartScreen 설정: 클라우드 구성 템플릿의 Windows 10. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "엔드포인트 검색 및 응답"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "앱 및 브라우저 격리",
- "aSRApplicationControl": "애플리케이션 제어",
- "aSRAttackSurfaceReduction": "공격 표면 감소 규칙",
- "aSRDeviceControl": "디바이스 제어",
- "aSRExploitProtection": "Exploit Protection",
- "aSRWebProtection": "웹 보호(Microsoft Edge 레거시)",
- "aVExclusions": "Microsoft Defender 바이러스 백신 제외",
- "antivirus": "Microsoft Defender 바이러스 백신",
- "cloudPC": "Windows 365 보안 기준",
- "default": "엔드포인트 보안",
- "defenderTest": "엔드포인트용 Microsoft Defender 데모",
- "diskEncryption": "BitLocker",
- "eDR": "엔드포인트 검색 및 응답",
- "edgeSecurityBaseline": "Microsoft Edge 기준",
- "edgeSecurityBaselinePreview": "미리 보기: Microsoft Edge 기준선",
- "editionUpgradeConfiguration": "버전 업그레이드 및 모드 전환",
- "firewall": "Windows 방화벽",
- "firewallRules": "Windows 방화벽 규칙",
- "identityProtection": "계정 보호",
- "identityProtectionPreview": "계정 보호(미리 보기)",
- "mDMSecurityBaseline1810": "2018년 10월 Windows 10 이상용 MDM 보안 기준",
- "mDMSecurityBaseline1810Preview": "미리 보기: 2018년 10월 Windows 10 이상용 MDM 보안 기준",
- "mDMSecurityBaseline1810PreviewBeta": "미리 보기: 2018년 10월 Windows 10용 MDM 보안 기준(베타)",
- "mDMSecurityBaseline1906": "2019년 5월 Windows 10 이상용 MDM 보안 기준",
- "mDMSecurityBaseline2004": "2020년 8월 Windows 10 이상용 MDM 보안 기준",
- "mDMSecurityBaseline2101": "2020년 12월 이후 Windows 10 MDM 보안 기준",
- "macOSAntivirus": "바이러스 백신",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS 방화벽",
- "microsoftDefenderBaseline": "엔드포인트용 Microsoft Defender 기준",
- "office365Baseline": "Microsoft Office O365 기준",
- "office365BaselinePreview": "미리 보기: Microsoft Office O365 기준",
- "securityBaselines": "보안 기준",
- "test": "테스트 템플릿",
- "testFirewallRulesSecurityTemplateName": "Windows 방화벽 규칙(테스트)",
- "testIdentityProtectionSecurityTemplateName": "계정 보호(테스트)",
- "windowsSecurityExperience": "Windows 보안 환경"
- },
- "Firewall": {
- "mDE": "Windows 방화벽"
- },
- "FirewallRules": {
- "mDE": "Windows 방화벽 규칙"
- },
- "OneDriveKnownFolderMove": {
- "description": "OneDrive 알려진 폴더 이동 설정: 클라우드 구성 템플릿의 Windows 10. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "계정 보호",
- "administrativeTemplates": "관리 템플릿",
- "androidCompliancePolicy": "Android 준수 정책",
- "aospDeviceOwnerCompliancePolicy": "Android(AOSP) 규정 준수 정책",
- "applicationControl": "비즈니스용 앱 제어",
- "attackSurfaceReductionRules": "공격 노출 영역 축소 규칙",
- "bitlocker": "BitLocker",
- "custom": "사용자 지정",
- "deliveryOptimization": "제공 최적화",
- "derivedPersonalIdentityVerificationCredential": "파생된 자격 증명",
- "deviceControl": "디바이스 제어",
- "deviceFeatures": "디바이스 기능",
- "deviceFirmwareConfigurationInterface": "디바이스 펌웨어 구성 인터페이스",
- "deviceLock": "디바이스 잠금",
- "deviceOwner": "완전 관리형, 전용 및 회사 소유 회사 프로필",
- "deviceRestrictions": "디바이스 제한",
- "deviceRestrictionsWindows10Team": "디바이스 제한(Windows 10 Team)",
- "domainJoinPreview": "도메인 가입",
- "editionUpgradeAndModeSwitch": "버전 업그레이드 및 모드 전환",
- "education": "교육",
- "email": "전자 메일",
- "emailSamsungKnoxOnly": "메일(삼성 KNOX 전용)",
- "endpointProtection": "엔드포인트 보호",
- "expeditedCheckin": "모바일 디바이스 관리 구성",
- "exploitProtection": "Exploit Protection",
- "extensions": "확장",
- "hardwareConfigurations": "BIOS 구성 및 기타 설정",
- "identityProtection": "Id 보호",
- "iosCompliancePolicy": "iOS 준수 정책",
- "kiosk": "키오스크",
- "localUsersAndGroups": "사용자 그룹 구성원 편집",
- "macCompliancePolicy": "Mac 준수 정책",
- "microsoft365AppsForEnterpriseSecurityBaseline": "엔터프라이즈용 Microsoft 365 앱 보안 기준",
- "microsoftDefenderAntivirus": "Microsoft Defender 바이러스 백신",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender 바이러스 백신 제외",
- "microsoftDefenderAtpWindows10Desktop": "엔드포인트용 Microsoft Defender(Windows 10 이상을 실행하는 데스크톱 디바이스)",
- "microsoftDefenderFirewallRules": "Windows 방화벽 규칙",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Microsoft Edge 보안 기준",
- "mxProfileZebraOnly": "MX 프로필(Zebra만)",
- "networkBoundary": "네트워크 경계",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "그룹 정책 재정의",
- "pkcsCertificate": "PKCS 인증서",
- "pkcsImportedCertificate": "PKCS 가져온 인증서",
- "preferenceFile": "기본 설정 파일",
- "presets": "미리 설정",
- "scepCertificate": "SCEP 인증서",
- "secureAssessmentEducation": "보안 평가(교육)",
- "securityBaselineForHololens2Advanced": "HoloLens 2의 고급 보안 기준",
- "securityBaselineForHololens2Standard": "HoloLens 2 표준 보안 기준",
- "securityBaselineForMicrosoftEdge": "Microsoft Edge 보안 기준",
- "settingsCatalog": "설정 카탈로그",
- "sharedMultiUserDevice": "공유 다중 사용자 디바이스",
- "softwareUpdates": "소프트웨어 업데이트",
- "trustedCertificate": "신뢰할 수 있는 인증서",
- "unknown": "알 수 없음",
- "unsupported": "지원되지 않음",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi 가져오기",
- "windows10CompliancePolicy": "Windows 10/11 준수 정책",
- "windows10MobileCompliancePolicy": "Windows 10 Mobile 준수 정책",
- "windows10XScep": "SCEP 인증서 - 테스트",
- "windows10XTrustedCertificate": "신뢰할 수 있는 인증서 - 테스트",
- "windows10XVPN": "VPN - 테스트",
- "windows10XWifi": "WIFI - 테스트",
- "windows11SecurityBaseline": "Windows 10 이상용 보안 기준",
- "windows365SecurityBaseline": "Windows 365 보안 기준",
- "windows8CompliancePolicy": "Windows 8 준수 정책",
- "windowsHealthMonitoring": "Windows 상태 모니터링",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Windows Phone 준수 정책",
- "windowsUpdateforBusiness": "비즈니스용 Windows 업데이트",
- "wiredNetwork": "유선 네트워크",
- "workProfile": "개인 소유 회사 프로필"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "업데이트를 점진적으로 사용할 수 있도록 설정",
- "immediateStart": "가능한 한 빨리 업데이트를 사용할 수 있도록 설정",
- "startDateOnly": "특정 날짜에 업데이트를 사용할 수 있도록 설정"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "관리 디바이스",
- "devicesWithoutEnrollment": "관리되는 앱"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "필터",
- "assignmentFilterTypeColumnHeader": "필터 모드",
- "assignmentToast": "최종 사용자 알림",
- "assignmentTypeTableHeader": "할당 유형",
- "autoUpdate": "자동 업데이트",
- "deadlineTimeColumnLabel": "설치 최종 기한",
- "deliveryOptimizationPriorityHeader": "배달 최적화 우선 순위",
- "groupTableHeader": "그룹",
- "installContextLabel": "설치 컨텍스트",
- "isRemovable": "이동식으로 설치",
- "licenseTypeLabel": "라이선스 유형",
- "modeTableHeader": "그룹 모드",
- "policySet": "정책 집합",
- "preventAutoAppUpdate": "자동 앱 업데이트 방지",
- "preventManagedAppBackup": "iCloud 앱 백업 방지",
- "restartGracePeriodHeader": "다시 시작 유예 기간",
- "startTimeColumnLabel": "가용성",
- "tracks": "트랙",
- "uninstallOnRemoval": "디바이스 제거 시 제거",
- "updateMode": "업데이트 우선 순위",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD 웹앱",
- "androidEnterpriseSystemApp": "Android Enterprise 시스템 앱",
- "androidForWorkApp": "관리형 Google Play 스토어 앱",
- "androidLobApp": "Android LOB(기간 업무) 앱",
- "androidStoreApp": "Android 스토어 앱",
- "builtInAndroid": "기본 제공 Android 앱",
- "builtInApp": "기본 제공 앱",
- "builtInIos": "기본 제공 iOS 앱",
- "iosIPadOSWebClip": "iOS/iPadOS 웹 클립",
- "iosLobApp": "iOS LOB(기간 업무) 앱",
- "iosStoreApp": "iOS 스토어 앱",
- "iosVppApp": "iOS 대량 구매 프로그램 앱",
- "lineOfBusinessApp": "LOB(기간 업무) 앱",
- "macOSDmgApp": "macOS 앱(DMG)",
- "macOSEdgeApp": "Microsoft Edge(macOS)",
- "macOSLobApp": "macOS 기간 업무 앱",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP(macOS)",
- "macOSOfficeSuiteApp": "macOS Office 제품군",
- "macOSPkgApp": "macOS 앱(PKG)",
- "macOSWebClip": "macOS 웹 클립",
- "macOsVppApp": "macOS Volume Purchase Program 앱",
- "managedAndroidLobApp": "관리되는 Android LOB(기간 업무) 앱",
- "managedAndroidStoreApp": "관리되는 Android 스토어 앱",
- "managedGooglePlayApp": "관리형 Google Play 스토어 앱",
- "managedGooglePlayPrivateApp": "관리형 Google Play 프라이빗 앱",
- "managedGooglePlayWebApp": "관리형 Google Play 웹 링크",
- "managedIosLobApp": "관리되는 iOS LOB(기간 업무) 앱",
- "managedIosStoreApp": "관리되는 iOS 스토어 앱",
- "microsoftStoreForBusinessApp": "비즈니스용 Microsoft 스토어 앱",
- "microsoftStoreForBusinessReleaseManagedApp": "비즈니스용 Microsoft 스토어",
- "officeAddIn": "Office 추가 기능",
- "officeSuiteApp": "Microsoft 365 앱(Windows 10 이상)",
- "sharePointApp": "SharePoint 앱",
- "teamsApp": "Teams 앱",
- "webApp": "웹 링크",
- "win32CatalogApp": "Windows 카탈로그 앱(Win32)",
- "winGetPublicApp": "Windows 패키지 관리자 커뮤니티 리포지토리",
- "winGetStoreApp": "Microsoft Store 앱(신규)",
- "windowsAppXLobApp": "Windows AppX LOB(기간 업무) 앱",
- "windowsClassicApp": "Windows 앱(Win32)",
- "windowsEdgeApp": "Microsoft Edge(Windows 10 이상)",
- "windowsMobileMsiLobApp": "Windows MSI 기간 업무 앱",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX LOB(기간 업무) 앱",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX LOB(기간 업무) 앱",
- "windowsPhone81StoreApp": "Windows Phone 8.1 스토어 앱",
- "windowsPhoneXapLobApp": "Windows Phone XAP LOB(기간 업무) 앱",
- "windowsStoreApp": "Microsoft Store 앱(레거시)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX LOB(기간 업무) 앱",
- "windowsUniversalLobApp": "Windows 유니버설 사업 부문 앱",
- "windowsWebApp": "Windows 웹 링크"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "제외됨",
- "include": "포함됨",
- "includeAllDevicesVirtualGroup": "포함됨",
- "includeAllUsersVirtualGroup": "포함됨"
- },
- "AssignmentToast": {
- "hideAll": "모든 알림 메시지 숨기기",
- "showAll": "모든 알림 메시지 표시",
- "showReboot": "컴퓨터 다시 시작에 대한 알림 메시지 표시"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "예",
- "notConfigured": "아니요"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "백그라운드",
- "displayText": "{0}에서 콘텐츠 다운로드",
- "foreground": "포그라운드",
- "header": "배달 최적화 우선 순위"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "앱을 설치하면 디바이스가 강제로 다시 시작될 수 있음",
- "basedOnReturnCode": "반환 코드에 따라 동작 결정",
- "force": "Intune에서 강제로 필수 디바이스를 다시 시작함",
- "suppress": "구체적인 작업이 없음"
- },
- "FilterType": {
- "exclude": "제외",
- "include": "포함",
- "none": "없음"
- },
- "InstallIntent": {
- "available": "등록된 디바이스에 사용 가능",
- "availableWithoutEnrollment": "등록 유무에 상관없이 사용 가능",
- "notApplicable": "적용할 수 없음",
- "required": "필수",
- "uninstall": "제거"
- },
- "SettingType": {
- "assignmentType": "할당 유형",
- "deviceLicensing": "라이선스 형식",
- "installContext": "디바이스 제거 시 제거",
- "toastSettings": "최종 사용자 알림",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "기본값",
- "postponed": "연기됨",
- "priority": "높은 우선 순위"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "초기 프로비전을 위해 장치를 구성합니다.",
- "title": "디바이스 준비"
- },
- "EnrollmentSettings": {
- "description": "등록 차단과 같은 등록 설정을 구성하고 사용자에게 할당합니다.",
- "title": "등록 설정"
- },
- "OSConfiguration": {
- "menuDescription": "사용자가 부팅 가능한 플래시 드라이브에서 Windows를 복구하는 데 사용할 수 있는 설정을 구성합니다.",
- "menuTitle": "Windows 운영 체제 복구 구성"
- },
- "coManagementAuthorityDesc": "Configuration Manager 통합에 대한 공동 관리 설정을 구성합니다.",
- "coManagementAuthorityTitle": "공동 관리 설정 ",
- "deploymentProfiles": "Windows AutoPilot 배포 프로필",
- "description": "사용자 또는 관리자가 Windows 10/11 PC를 Intune에 등록하는 7가지 방법을 알아봅니다.",
- "descriptionLabel": "Windows 등록 방법",
- "enrollmentStatusPage": "등록 상태 페이지"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "모든 권장 드라이버 업데이트 자동 승인",
- "manual": "드라이버 업데이트 수동 승인 및 배포"
- },
- "BulkActions": {
- "button": "대량 작업"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "승인 방법:"
- },
- "DeploymentDeferralInDays": {
- "label": "이후에 업데이트를 사용할 수 있도록 설정",
- "units": "(일)",
- "value": "{0}일"
- },
- "DriverAction": {
- "header": "아래에서 작업을 선택하세요.",
- "label": "드라이버 작업",
- "placeholder": "작업 선택"
- },
- "IncludedDrivers": {
- "label": "포함된 드라이버"
- },
- "SelectDrivers": {
- "header": "대량 작업에 포함할 드라이버 선택"
- },
- "SelectDriversToInclude": {
- "button": "포함할 드라이버 선택"
- },
- "SelectLessDrivers": {
- "validation": "최대 100개의 드라이버를 선택할 수 있습니다."
- },
- "SelectMoreDrivers": {
- "validation": "드라이버를 한 개 이상 선택해야 합니다."
- },
- "SelectedDrivers": {
- "label": "선택한 드라이버"
- },
- "availabilityDate": "Windows 업데이트에서 사용할 수 있도록 설정",
- "bladeTitle": "드라이버 업데이트 Windows 10 이상(미리 보기)",
- "lastSync": "마지막 동기화:",
- "lastSyncDefaultText": "초기 인벤토리 수집 대기 중",
- "loadError": "로드하지 못했습니다."
- },
- "DriverStatus": {
- "approved": "승인됨",
- "declined": "거절됨",
- "export": "권장 드라이버 내보내는 중",
- "needsReview": "검토 필요",
- "paused": "일시 중지됨"
- },
- "DriversToReview": {
- "text": "검토할 {0}"
- },
- "Subtitle": {
- "automatic": "자동 승인 드라이버 업데이트 정책",
- "manual": "수동 승인 드라이버 업데이트 정책"
- },
- "SyncNotification": {
- "failure": "{0}을(를) 동기화할 수 없습니다.",
- "failureDescription": "오류가 발생하여 요청한 동기화를 완료할 수 없습니다. 다시 시도해 주세요.",
- "pending": "{0} 동기화 진행 중",
- "pendingDescription": "가장 최근의 데이터를 검색하고 있습니다. 이 프로세스는 몇 분 정도 걸릴 수 있습니다.",
- "success": "{0} 동기화 완료",
- "successDescription": "{0}에 WUfB 서비스와 동기화 완료"
- },
- "SyncSpinner": {
- "text": "동기화가 진행 중입니다. 몇 분 정도 걸릴 수 있습니다. 알림을 찾거나 몇 분 후에 다시 확인하세요."
- },
- "TabName": {
- "basics": "기본",
- "driverUpdateSettings": "설정",
- "otherDrivers": "기타 드라이버",
- "properties": "속성",
- "recommendedDrivers": "권장 드라이버"
- },
- "driverAddFilter": "필터 추가",
- "driverApplicableDevices": "적용 가능한 장치",
- "driverApprovalStatus": "상태",
- "driverBulkActions": "대량 작업",
- "driverClass": "드라이버 클래스",
- "driverCount": "레코드 {0}~{1}/{2}개 표시 중",
- "driverFilterNoneSelected": "선택된 항목이 없음",
- "driverManufacturer": "제조업체",
- "driverName": "드라이버 이름",
- "driverNameLower": "Windows 드라이버 업데이트 배포",
- "driverNameUpper": "Windows 드라이버 업데이트 배포",
- "driverRefresh": "새로 고침",
- "driverReleaseDate": "릴리스 날짜",
- "driverSearch": "검색",
- "driverSearchKeyword": "검색 키워드 입력",
- "driverVersion": "버전",
- "firstDeploymentDate": "첫 번째 배포",
- "infoBoxText": "정책을 할당하고 만든 후 인벤토리를 채우는 데 최대 24시간이 걸릴 수 있습니다.",
- "textBlockText": "정책 승인 및 배포 설정을 선택합니다. 업데이트를 자동으로 또는 수동으로 승인하고 배포하는 정책을 설정하도록 선택합니다. 정책을 만든 후에는 승인 방법을 변경할 수 없지만 할당된 디바이스에 대한 인벤토리가 빌드되면 개별 드라이버 승인 및 배포 세부 정보를 변경할 수 있습니다."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "이 설정을 사용하여 회사에서 사용이 승인되지 않은 앱을 어떤 사용자가 설치하는지 알 수 있습니다. 제한된 앱 목록 유형을 선택하세요.
\r\n 금지된 앱 - 사용자가 앱을 설치할 때 알림을 받고 싶은 앱 목록입니다. \r\n 승인된 앱 - 회사에서 사용이 승인된 앱 목록입니다. 이 목록에 없는 앱을 사용자가 설치하면 알림을 받게 됩니다. \r\n ",
- "androidZebraMxZebraMx": "MX 프로필을 XML 형식으로 업로드하여 Zebra 디바이스를 구성합니다.",
- "iosDeviceFeaturesAirprint": "네트워크의 AirPrint 호환 프린터에 자동으로 연결하도록 iOS 디바이스를 구성하는 데 이러한 설정을 사용합니다. 프린터의 IP 주소 및 리소스 경로가 필요합니다.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "iOS 13.0 이상을 실행하는 디바이스에 SSO(Single Sign-On)를 사용하도록 설정하는 앱 확장을 구성합니다.",
- "iosDeviceFeaturesHomeScreenLayout": "iOS 디바이스에서 도크 및 홈 화면에 대한 레이아웃을 구성합니다. 특정 디바이스에서는 표시할 수 있는 항목 수가 제한될 수 있습니다.",
- "iosDeviceFeaturesIOSWallpaper": "iOS 디바이스의 홈 화면 및/또는 잠금 화면에 나타나는 이미지를 표시합니다.\r\n 각 위치에 고유한 이미지를 표시하려면 잠금 화면 이미지를 사용하여 프로필을 하나 만들고, 홈 화면 이미지를 사용하여 프로필을 하나 만듭니다.\r\n 그런 다음 두 프로필을 모두 사용자에게 할당합니다.\r\n \r\n
\r\n
최대 파일 크기: 750KB
\r\n
파일 형식: PNG, JPG 또는 JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "앱에 대한 알림 설정을 지정합니다. iOS 9.3 이상을 지원합니다.",
- "iosDeviceFeaturesSharedDevice": "잠긴 화면에 표시되는 선택적 텍스트를 지정하세요. iOS 9.3 이상에서 지원됩니다. 자세한 정보",
- "iosGeneralApplicationRestrictions": "이 설정을 사용하여 회사에서 사용이 승인되지 않은 앱을 어떤 사용자가 설치하는지 알 수 있습니다. 제한된 앱 목록 유형을 선택하세요.
\r\n 금지된 앱 - 사용자가 앱을 설치할 때 알림을 받고 싶은 앱 목록입니다. \r\n 승인된 앱 - 회사에서 사용이 승인된 앱 목록입니다. 이 목록에 없는 앱을 사용자가 설치하면 알림을 받게 됩니다. \r\n ",
- "iosGeneralApplicationVisibility": "표시된 앱 목록을 사용하여 사용자가 보거나 실행할 수 있는 iOS 앱을 지정하세요. 숨겨진 앱 목록을 사용하여 사용자가 보거나 실행할 수 있는 iOS 앱을 지정하세요.",
- "iosGeneralAutonomousSingleAppMode": "이 목록에 추가하고 디바이스에 할당하는 앱은 해당 앱이 실행될 때에만 작동하도록 디바이스를 잠그거나, 특정 작업이 실행 중인 동안(예: 테스트 수행) 디바이스를 잠글 수 있습니다. 작업을 완료하거나 제한을 제거하면 디바이스가 정상 상태로 돌아옵니다.",
- "iosGeneralKiosk": "키오스크 모드는 다양한 설정을 디바이스에 잠그거나 디바이스에서 실행할 수 있는 단일 앱을 지정합니다. 이 모드는 디바이스에서 단일 데모 앱만 실행하려는 소매점과 같은 환경에서 유용합니다.",
- "macDeviceFeaturesAirprint": "이러한 설정을 사용하여 macOS 디바이스가 네트워크의 AirPrint 호환 프린터에 자동으로 연결되도록 구성합니다. 프린터의 IP 주소와 리소스 경로가 필요합니다.",
- "macDeviceFeaturesAssociatedDomains": "조직의 앱과 웹 사이트 간에 데이터와 로그인 자격 증명을 공유하도록 연결된 도메인을 구성합니다. 이 프로필은 macOS 10.15 이상을 실행하는 디바이스에 적용할 수 있습니다.",
- "macDeviceFeaturesExtensibleSingleSignOn": "macOS 10.15 이상을 실행하는 디바이스에 SSO(Single Sign-On)를 사용하도록 설정하는 앱 확장을 구성합니다.",
- "macDeviceFeaturesLoginItems": "사용자가 디바이스에 로그인할 때 열리는 앱, 파일 및 폴더를 선택합니다. 사용자가 선택된 앱이 열리는 방식을 변경하지 못하도록 하려는 경우 사용자 구성에서 앱을 숨길 수 있습니다.",
- "macDeviceFeaturesLoginWindow": "macOS 로그인 화면의 모양과 로그인 전후 사용자가 사용할 수 있는 기능을 구성합니다.",
- "macExtensionsKernelExtensions": "이러한 설정을 사용하여 10.13.2 이상을 실행하는 macOS 디바이스에서 커널 확장 정책을 구성합니다.",
- "macGeneralDomains": "사용자가 보내거나 받는 메일 중 여기에 지정하는 도메인과 일치하지 않는 메일은 신뢰할 수 없는 것으로 표시됩니다.",
- "windows10EndpointProtectionApplicationGuard": "Microsoft Edge를 사용하는 동안 Microsoft Defender Application Guard는 조직에서 신뢰할 수 있는 사이트로 정의되지 않은 사이트로부터 환경을 보호합니다. 사용자가 격리된 네트워크 경계 목록에 없는 사이트를 방문하면 사이트가 Hyper-V의 가상 브라우징 세션에서 열립니다. 신뢰할 수 있는 사이트는 [디바이스 구성]에서 구성할 수 있는 네트워크 경계에 의해 정의됩니다. 이 기능은 Windows 10(64비트) 이상의 운영체제가 설치된 디바이스에 대해서만 사용할 수 있습니다.",
- "windows10EndpointProtectionCredentialGuard": "Credential Guard를 사용하도록 설정하면 다음과 같은 필수 설정이 사용하도록 설정됩니다.\r\n \r\n
\r\n
가상화 기반 보안 사용: 다음 다시 부팅 시 VBS(가상화 기반 보안)를 켭니다. 가상화 기반 보안에서는 Windows 하이퍼바이저를 사용하여 보안 서비스에 대한 지원을 제공합니다.
\r\n \r\n
보안 부팅 및 DMA(직접 메모리 액세스): 보안 부팅 및 DMA(직접 메모리 액세스)를 통해 VBS를 켭니다.
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Microsoft Defender 애플리케이션 제어를 통해 감사해야 하거나 실행을 신뢰할 수 있는 추가 앱을 선택합니다. Windows 구성 요소 및 Windows 스토어의 모든 앱은 자동으로 실행이 신뢰됩니다.
\r\n \"감사 전용\" 모드에서 실행될 때는 애플리케이션이 차단되지 않습니다. \"감사 전용\" 모드에서는 모든 이벤트가 로컬 클라이언트 로그에 기록됩니다.\r\n ",
- "windows10GeneralPrivacyPerApp": "“기본 개인 정보 보호”에서 정의한 것과 개인 정보 보호 방식이 달라야 하는 앱을 추가합니다.",
- "windows10NetworkBoundaryNetworkBoundary": "네트워크 경계는 엔터프라이즈 네트워크에 있는 컴퓨터의 클라우드에 호스트된 도메인 및 IP 주소 범위 같은 엔터프라이즈 리소스의 목록입니다. 네트워크 경계를 정의하여 이러한 위치에 있는 데이터를 보호하는 정책을 적용하세요.",
- "windowsHealthMonitoring": "Windows 상태 모니터링 정책을 구성합니다.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone은 사용자가 금지된 앱 목록에 지정된 앱이나 승인된 앱 목록에서 지정되지 않은 앱을 설치 또는 실행하지 못하도록 차단할 수 있습니다. 관리되는 앱은 모두 승인된 목록에 추가해야 합니다."
- },
- "Inputs": {
- "accountDomain": "계정 도메인",
- "accountDomainHint": "예: contosodomain",
- "accountDomainInfoBalloon": "사용자의 계정 도메인을 지정합니다.",
- "accountTypeInfoBalloon": "인증 모델에 따라 구성할 계정 유형을 지정합니다.",
- "allowContactSetting": "사용자가 연락처 설정을 변경할 수 있도록 허용",
- "allowContactSyncInfoBalloon": "사용자가 연락처 동기화 설정을 변경할 수 있도록 허용할지를 지정합니다.",
- "allowUserChange": "사용자가 설정을 변경할 수 있도록 허용",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "com.microsoft.word와 비슷한 패키지 이름을 입력하세요.",
- "androidUrlValidation": "유효한 URL을 입력하세요(예: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en).",
- "appInstallContext": "앱 설치 컨텍스트",
- "appUrlLabel": "앱 스토어 URL",
- "appleUrlValidation": "유효한 URL을 입력하세요(https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8).",
- "applicableDeviceType": "적용할 수 있는 디바이스 유형",
- "assignmentActionLabel": "모드",
- "authenticationMethodInfoBalloon": "사용자에 대한 인증 방법을 지정합니다.",
- "authenticationMetod": "인증 방법",
- "authenticationType": "인증 형식",
- "authenticationTypeInfoBalloon": "사용자의 인증 형식 지정",
- "availableLicenseCount": "사용 가능한 라이선스",
- "basicAuth": "기본 인증",
- "biometricsInfoBalloon": "사용자가 디바이스의 앱에 액세스하기 위해 TouchID 또는 FaceID 같은 생체 인식이 필요할 수 있습니다. 필요한 경우 생체 인식은 이 프로필에서 선택한 인증 방법과 함께 사용됩니다. 앱 보호 정책에 관리되는 데이터에 액세스하기 전 액세스 요구 사항이 포함되므로, Intune 앱 보호 정책이 배포될 때 이 설정은 사용하도록 설정되어 있지 않아야 합니다. 둘 다 사용하도록 설정하면 Outlook 모바일에 액세스하기 위한 여러 액세스 프롬프트가 발생합니다. 구성되지 않도록 설정하면 기본 앱 설정이 [끄기]로 설정됩니다. ",
- "bookNameLabel": "책 이름",
- "bundleDescriptionHint": "포함된 앱을 기술하는 설명을 입력합니다.",
- "calendar": "일정",
- "categoryLabel": "범주",
- "categoryNameLabel": "기본 이름",
- "certProfileType": "인증서 프로필 유형",
- "certificate": "인증서",
- "certificates": "인증서",
- "commandLineLabel": "명령줄 인수",
- "commandLineSizeHint": "명령줄 인수 텍스트의 최대 길이는 1024자입니다.",
- "configurationSettingsFormatLabel": "구성 설정 형식",
- "configurationSettingsLabel": "설정 형식",
- "contactSync": "연락처 저장",
- "contactSyncInfoBalloon": "모바일 디바이스의 기본 주소록에 연락처를 저장하면 새 통화 및 텍스트 메시지를 사용자의 기존 Outlook 연락처에 연결할 수 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [끄기]로 설정됩니다.",
- "contacts": "연락처",
- "createdDateTime": "만든 날짜",
- "defaultCategoryHint": "기본 범주를 변경할 수 없습니다.",
- "deploySMimeCertsFromIntune": "Intune에서 S/MIME 인증서 배포",
- "descriptionGenericLabel": "설명",
- "descriptionHint": "설명 입력...",
- "descriptionLabel": "설명",
- "descriptionSizeHint": "설명은 10,000자를 초과할 수 없습니다.",
- "developerLabel": "개발자",
- "developerSizeHint": "개발자 이름의 최대 길이는 256자입니다.",
- "disable": "사용 안 함",
- "disabled": "사용 안 함",
- "displayNameLabel": "이름",
- "displayVersionHint": "앱 버전 입력",
- "displayVersionLabel": "앱 버전",
- "displayVersionLengthCheck": "디스플레이 버전의 길이는 최대 130자여야 합니다.",
- "eBookCategoryNameLabel": "기본 이름",
- "emailAccount": "메일 계정 이름",
- "emailAccountHint": "예: 회사 메일",
- "emailAccountInfoBalloon": "사용자의 디바이스에서 사용자에게 메일 계정을 표시할 표시 이름을 지정합니다.",
- "emailAddressAttribute": "Microsoft Entra ID의 이메일 주소 속성",
- "emailAddressInfoBalloon": "메일을 보내고 받는 데 사용할 메일 주소를 지정합니다.",
- "emailServer": "메일 서버",
- "emailServerHint": "예: mail.contoso.com",
- "emailServerInfoBalloon": "Exchange Server의 호스트 이름을 지정합니다.",
- "enable": "사용",
- "enableSMime": "S/MIME 사용",
- "enabled": "사용",
- "encryptAllEmails": "모든 메일 암호화",
- "encryptionCertificates": "암호화 인증서",
- "endUserNotifications": "최종 사용자 알림",
- "enrollmentTypeLabel": "디바이스 등록 유형",
- "externalRecipients": "외부 받는 사람 메일 설명",
- "externalRecipientsInfoBalloon": "보낸 사람이 외부 받는 사람을 추가하거나 외부 받는 사람이 포함된 메일 그룹을 추가하면 외부 받는 사람 메일 설명이 표시됩니다. 이 메일 설명은 작성하는 메시지가 조직에서 나갈지를 보낸 사람에게 알려 단어, 어조 및 내용을 올바르게 결정할 수 있도록 합니다. 하이브리드 최신 인증을 사용하는 Exchange Online 계정 및 온-프레미스 계정에만 사용할 수 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [켜기]로 설정됩니다.",
- "focusedInbox": "중요 받은 편지함",
- "focusedInboxInfoBalloon": "중요 받은 편지함은 받은 편지함을 [중요]와 [기타]의 두 탭으로 나눕니다. 가장 중요한 메일은 [중요] 탭에 있으며, 나머지 메일은 여전히 쉽게 액세스할 수 있지만 방해되지 않도록 [기타] 탭에 있습니다. 구성되지 않도록 설정하면 기본 앱 설정이 [켜기]로 설정됩니다. ",
- "fullScreenEnabledLabel": "전체 화면",
- "gmailNineAmountOfEmail": "동기화할 메일 양",
- "gmailNineAuthenticationMethodInfoBalloon": "사용자가 VPN 서버에 인증하는 방법을 선택합니다. 인증서를 사용하여 가장 안전하고 원활한 환경을 최종 사용자에게 제공하세요. 인증 방법을 선택하세요. 디바이스 소유자 디바이스에 대한 SCEP 및 PKCS 인증서 프로필을 사용할 수 없으므로 인증서 기반 인증을 아직 사용할 수 없습니다. ",
- "gmailNineCertificateUPNInfoBalloon": "인증서에 UPN(사용자 계정 이름)이 주체 대체 이름으로 포함되어야 합니다.",
- "gmailNineEmailAddressInfoBalloon": "Intune이 Microsoft Entra ID에서 가져오는 속성은 프로필에서 사용할 이메일 주소를 동적으로 생성합니다. MyName@contoso.com(UPN). 이메일 프로필의 Microsoft Entra 속성에 대해 자세히 알아보세요.",
- "gmailNineEmailServerInfoBalloon": "지정한 앱이 연결되어 메일을 가져오는 메일 서버의 Exchange 위치(URL)입니다.",
- "gmailNineEmailSynchronizeInfoBalloon": "클라이언트에서 동기화할 메일 수를 제어합니다.",
- "gmailNineSSLInfoBalloon": "SSL을 사용하여 메일 서버와의 모든 통신을 보호합니다.",
- "gmailNineUsernameInfoBalloon": "Intune이 Microsoft Entra ID에서 가져오는 속성은 프로필에서 사용할 사용자 이름을 동적으로 생성합니다. MyName@contoso.com(UPN) 또는 MyName(사용자 이름). 이메일 프로필의 Microsoft Entra 속성에 대해 자세히 알아보세요.",
- "ignoreManifestScope": "매니페스트 범위 무시",
- "ignoreVersionDetection": "앱 버전 무시",
- "informationUrlLabel": "정보 URL",
- "informationUrlSizeHint": "정보 URL의 최대 길이는 1024자입니다.",
- "installAsManaged": "관리형으로 설치",
- "installationSourceLabel": "앱 유형",
- "installerTypeInfoBalloon": "애플리케이션 패키지의 설치 관리자 유형입니다.",
- "installerTypeLabel": "설치 관리자 유형",
- "isFeatured": "회사 포털에서 이 항목을 추천 앱으로 표시",
- "isMAMEnabledToggleLabel": "예",
- "lastModifiedDateTime": "마지막 업데이트 시간",
- "ldapUrl": "LDAP URL",
- "licensingType": "디바이스 컨텍스트 할당 지원",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "최소 운영 체제",
- "modernAuth": "최신 인증",
- "nameHint": "이름 입력",
- "nameLabel": "이름",
- "nameSizeHint": "이름의 최대 길이는 512자입니다.",
- "notConfigured": "구성되지 않음",
- "notesLabel": "참고",
- "notesSizeHint": "메모 텍스트의 최대 길이는 1024자입니다.",
- "notificationType": "알림 유형",
- "oneDay": "1일",
- "oneMonth": "1개월",
- "oneWeek": "1주",
- "outlookSMimeSettings": "Outlook S/MIME 설정",
- "ownerLabel": "소유자",
- "ownerSizeHint": "소유자 이름의 최대 길이는 256자입니다.",
- "packageIdLabel": "패키지 식별자",
- "packageNameLabel": "패키지 이름",
- "pivCredentialNotConfigured": "테넌트의 파생된 자격 증명 발급자를 선택하지 않았습니다. 이 정책을 디바이스에 적용하려면 발급자를 구성해야 합니다.",
- "platformLabel": "플랫폼",
- "policyDescriptionLabel": "설명",
- "policyNameLabel": "이름",
- "preComposedIconEnabled": "미리 구성됨",
- "primarySMTPAddress": "기본 SMTP 주소",
- "privacyUrlLabel": "개인정보취급방침 URL",
- "publisherHint": "게시자 이름을 입력하세요.",
- "publisherLabel": "게시자",
- "publisherSizeHint": "판매자 이름의 길이는 2자에서 1024자(포함) 사이여야 합니다.",
- "require": "필요",
- "requireBiometrics": "앱에 액세스하려면 생체 인식 필요",
- "sAMAccountName": "SamAccountName",
- "scopeTagsRequired": "한 개 이상의 범위 태그가 필요합니다.",
- "searchAppLabel": "앱 선택",
- "searchAppLinkText": "App Store 검색",
- "searchWinGetPublicRepositoryLinkText": "Windows 패키지 관리자 커뮤니티 리포지토리 검색",
- "searchWinGetStoreRepositoryLinkText": "Microsoft Store 앱(신규) 검색",
- "selectAAD": "Microsoft Entra 속성을 선택하세요.",
- "selectAppFileLabel": "파일 선택",
- "selectAppFileLinkText": "앱 패키지 파일 선택",
- "selectAppFileToUpdateLabel": "업데이트할 파일 선택",
- "selectAuthMethod": "인증 방법 선택",
- "selectAuthType": "인증 형식 선택",
- "selectCatalogAppLabel": "앱 선택",
- "selectCatalogAppLinkText": "Enterprise App Catalog 검색",
- "selectCertificate": "인증서 선택",
- "signAllEmails": "모든 메일 서명",
- "signingCertificates": "서명 인증서",
- "ssl": "SSL",
- "suiteDescriptionLabel": "제품군 설명",
- "suiteNameLabel": "제품군 이름",
- "targetApplicationBundleIdentifier": "대상 애플리케이션 번들 식별자",
- "targetedPlatformsLabel": "대상 플랫폼",
- "tasks": "작업",
- "threeDays": "3일",
- "totalLicenseCount": "총 라이선스 수",
- "twoWeeks": "2주",
- "unifiedAssignmentsLabel": "할당 대상:",
- "unlimited": "무제한",
- "urlHint": "유효한 URL을 입력하세요.",
- "useManagedBrowserHint": "Android 및 iOS에만 해당. 자세히 알아보기",
- "useManagedBrowserLabel": "이 링크를 열려면 Managed Browser가 필요",
- "userPrinicipalName": "사용자 계정 이름",
- "username": "사용자 이름",
- "usernameAttribute": "Microsoft Entra ID의 사용자 이름 속성",
- "usernameAttributreInfoBalloon": "계정을 인증하는 데 사용할 메일 프로필의 사용자 계정 이름을 지정합니다.",
- "usernamePassword": "사용자 이름 및 암호",
- "webAppUrlHint": "http:// 또는 https://로 시작하는 유효한 URL을 입력하세요.",
- "webAppUrlLabel": "앱 URL",
- "webAppUrlSizeHint": "앱 URL의 최대 길이는 1024자입니다.",
- "windowsUrlValidation": "유효한 URL을 입력하세요(예: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm).",
- "xMLDataEntered": "입력한 XML 데이터",
- "xmlFormatInvalid": "XML 정책 형식이 잘못되었습니다.",
- "xmlTooLarge": "입력 크기는 1MB 미만이어야 합니다."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "{0} 삭제 실패",
- "failureCa": "CA 정책에서 참조하므로 {0}을(를) 삭제하지 못했습니다.",
- "modifying": "{0} 삭제 중",
- "success": "{0}을(를) 삭제함"
- },
- "Notify": {
- "failure": "{0} 업데이트 실패",
- "modifying": "{0} 수정",
- "success": "{0} 업데이트 성공"
- },
- "menuLabel": "인증 컨텍스트"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "페더레이션 공급자가 충족하는 인증 방법을 요구하는 방법에 대해 자세히 알아봅니다.",
- "certificate": "인증서 인증",
- "infoBubble": "ADFS 등의 페더레이션 공급자가 만족해야 하는 필요한 인증 방법을 지정하세요.",
- "multifactor": "다단계 인증",
- "require": "페더레이션된 인증 방법 필요(미리 보기)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "영구 브라우저 세션 정책은 [모든 클라우드 앱]을 선택했을 때만 올바르게 작동합니다. 클라우드 앱 선택 항목을 업데이트하세요."
- },
- "Option": {
- "always": "항상 영구적임",
- "help": "영구 브라우저 세션을 사용하면 사용자가 브라우저 창을 닫았다가 다시 열어도 로그인 상태가 유지됩니다. \n
\n
이 설정은 \"모든 클라우드 앱\"을 선택했을 때 올바르게 작동합니다.
\n
이는 토큰 수명 또는 로그인 빈도 설정에 영향을 주지 않습니다.
\n
이는 회사 브랜딩에서 \"로그인 상태를 유지하는 옵션 표시\" 정책을 재정의합니다.
\n
\"영구적이지 않음\"은 페더레이션 인증 서비스에서 통과된 모든 영구 SSO 클레임을 재정의합니다.
\n
\"영구적이지 않음\"은 여러 애플리케이션에서 그리고 여러 애플리케이션 간에 모바일 디바이스 및 사용자의 모바일 브라우저에서의 SSO를 금지합니다.
\n",
- "label": "영구 브라우저 세션",
- "never": "영구적이지 않음"
- },
- "Warning": {
- "allApps": "영구 브라우저 세션은 [모든 클라우드 앱]을 선택했을 때만 올바르게 작동합니다. 클라우드 앱 선택 항목을 변경하세요. 자세한 내용을 보려면 여기를 클릭하세요."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "시간 또는 일",
- "value": "빈도"
- },
- "Option": {
- "Day": {
- "plural": "{0}일",
- "singular": "1일"
- },
- "Hour": {
- "plural": "{0}시간",
- "singular": "1시간"
- },
- "daysOption": "일",
- "everytime": "매번",
- "help": "사용자가 리소스에 액세스하려고 할 때 다시 로그인할지를 묻기까지 걸리는 기간입니다. 기본 설정은 90일(롤링 기간)입니다. 즉, 사용자가 머신에서 90일 이상 비활성 상태였다가 리소스에 액세스하려고 처음 시도할 때 사용자에게 다시 인증하라는 메시지가 표시됩니다.",
- "hoursOption": "시간",
- "label": "로그인 빈도",
- "placeholder": "단위 선택 "
- }
- },
- "mainOption": "세션 수명 수정",
- "mainOptionHelp": "사용자에게 메시지가 표시되는 빈도와 브라우저 세션이 지속될지 여부를 구성합니다. 최신 인증 프로토콜을 지원하지 않는 애플리케이션은 이러한 정책을 준수하지 않을 수 있습니다. 그러한 경우 애플리케이션 개발자에게 문의하세요."
- },
- "SingleSelectorActive": {
- "failed": "이 데이터를 로드할 수 없습니다.",
- "reattempt": "데이터를 로드합니다. {1} 중 {0}을(를) 다시 시도합니다."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "디렉터리 역할 선택"
- },
- "Excluded": {
- "gridAria": "제외된 사용자 목록"
- },
- "Included": {
- "gridAria": "포함된 사용자 목록"
- },
- "Validation": {
- "customRoleIncluded": "\"디렉터리 역할\"에 사용자 지정 역할이 하나 이상 포함되어 있습니다.",
- "customRoleSelected": "사용자 지정 역할을 하나 이상 선택함",
- "failed": "\"{0}\"을(를) 구성해야 합니다.",
- "roles": "역할을 하나 이상 선택하세요.",
- "usersGroups": "사용자나 그룹을 하나 이상 선택하세요."
- },
- "learnMore": "사용자 및 그룹, 워크로드 ID, 디렉터리 역할 또는 외부 게스트와 같이 정책을 적용할 대상에 따라 액세스를 제어합니다."
- },
- "advancedTabText": "고급",
- "allCloudAppsErrorBox": "\"암호 변경 필요\" 권한을 선택하면 \"모든 클라우드 앱\"을 선택해야 합니다.",
- "allCloudAppsReauth": "\"매회 로그인 빈도\" 세션 제어 및 \"로그인 위험\" 조건이 선택된 경우 \"모든 클라우드 앱\"을 꼭 선택해야 합니다",
- "allCloudOrSpecificApps": "\"매번 로그인 빈도\" 세션 컨트롤에는 \"모든 클라우드 앱\" 또는 특별히 지원되는 앱을 선택해야 합니다.",
- "allDayCheckboxLabel": "하루 종일",
- "allDevicePlatforms": "모든 디바이스",
- "allGuestUserInfoContent": "Microsoft Entra B2B 게스트를 포함하지만 SharePoint B2B 게스트는 포함하지 않습니다.",
- "allGuestUserLabel": "모든 게스트 및 외부 사용자",
- "allRiskLevelsOption": "모든 위험 수준",
- "allTrustedLocationLabel": "모든 신뢰된 위치",
- "allUserGroupSetSelectorLabel": "모든 사용자 및 그룹 선택됨",
- "allUsersReauth": "\"매번 로그인 빈도\" 세션 제어에서는 \"모든 사용자\"를 선택해야 합니다.",
- "allUsersString": "모든 사용자",
- "and": "{0} 및 {1}",
- "andWithGrouping": "({0}) 및 {1}",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "모든 클라우드 앱",
- "appContextOptionInfoContent": "요청한 인증 태그",
- "appContextOptionLabel": "요청한 인증 태그(미리 보기)",
- "appContextUriPlaceholder": "예: uri:contoso.com:level3",
- "appEnforceInfoBubble": "앱에서 적용하는 제한에는 클라우드 앱 내에서 추가 관리자 구성이 필요할 수 있습니다. 제한은 새 세션에 대해서만 효과가 적용됩니다.",
- "appNotSetSeletorLabel": "0개의 클라우드 앱이 선택됨",
- "appReauthNotSupported": "이 앱은 \"매번 로그인 빈도\" 세션 제어를 지원하지 않습니다.",
- "applyConditionClientAppInfoBalloonContent": "클라이언트 앱을 구성하여 특정 클라이언트 앱에 정책 적용",
- "applyConditionDevicePlatformInfoBalloonContent": "디바이스 플랫폼을 구성하여 특정 플랫폼에 정책 적용",
- "applyConditionDeviceStateInfoBalloonContent": "특정 디바이스 상태에 정책을 적용하도록 디바이스 상태를 구성",
- "applyConditionLocationInfoBalloonContent": "위치를 구성하여 신뢰할 수 있는/신뢰할 수 없는 위치에 정책 적용",
- "applyConditionSigninRiskInfoBalloonContent": "로그인 위험을 구성하여 선택된 위험 수준에 정책 적용",
- "applyConditionUserRiskInfoBalloonContent": "선택한 위험 수준에 정책을 적용하도록 사용자 위험 구성",
- "applyConditonLabel": "구성",
- "ariaLabelPolicyDisabled": "정책이 사용하지 않도록 설정되었습니다.",
- "ariaLabelPolicyEnabled": "정책을 사용함",
- "ariaLabelPolicyReportOnly": "정책이 보고서 전용 모드임",
- "blockAccess": "액세스 차단",
- "builtInDirectoryRoleLabel": "기본 제공 디렉터리 역할",
- "casCustomControlInfo": "Cloud App Security 포털에서 사용자 지정 정책을 구성해야 합니다. 이 컨트롤은 피처링된 앱에서 즉시 작동하며 모든 앱에서 자체 온보딩이 가능합니다. 두 가지 시나리오에 대해 자세히 알아보려면 여기를 클릭하세요.",
- "casInfoBubble": "이 제어는 다양한 클라우드 앱에서 작동합니다.",
- "casPreconfiguredControlInfo": "이 컨트롤은 추천 앱에서 즉시 작동하며 모든 앱에서 자체 온보딩이 가능합니다. 두 가지 시나리오에 대해 자세히 알아보려면 여기를 클릭하세요.",
- "cert64DownloadCol": "base64 인증서 다운로드",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "인증서 다운로드",
- "certDurationCol": "만료",
- "certDurationStartCol": "유효 기간",
- "certName": "VpnCert",
- "certainApps": "\"다단계 인증 필요\" 및 \"암호 변경 필요\"가 선택되지 않은 경우 특별히 지원되는 앱만 \"로그인 빈도(항상)\"을 사용할 수 있습니다.",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "애플리케이션 선택",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "애플리케이션을 선택함",
- "chooseApplicationsEmpty": "애플리케이션 없음",
- "chooseApplicationsNone": "없음",
- "chooseApplicationsNoneFound": "\"{0}\"을(를) 찾을 수 없습니다. 다른 이름 또는 ID를 사용해 보세요.",
- "chooseApplicationsPlural": "{0} 및 {1}개 더",
- "chooseApplicationsReAuthEverytimeInfo": "앱을 찾고 계신가요? 일부 응용 프로그램은 \"재인증 필요 – 매번\" 세션 컨트롤과 함께 사용할 수 없음",
- "chooseApplicationsRemove": "제거",
- "chooseApplicationsReturnedPlural": "{0}개 애플리케이션을 찾음",
- "chooseApplicationsReturnedSingular": "1개 애플리케이션을 찾음",
- "chooseApplicationsSearchBalloon": "애플리케이션의 이름 또는 ID를 입력해서 검색합니다.",
- "chooseApplicationsSearchHint": "애플리케이션 검색...",
- "chooseApplicationsSearchLabel": "애플리케이션",
- "chooseApplicationsSearching": "검색 중...",
- "chooseApplicationsSelect": "선택",
- "chooseApplicationsSelected": "선택됨",
- "chooseApplicationsSingular": "{0} 및 1개 더",
- "chooseApplicationsTooMany": "보다 많은 결과가 표시될 수 있습니다. 검색 상자를 사용해서 필터링하세요.",
- "chooseLocationCorpnetItem": "기업 네트워크",
- "chooseLocationSelectedLocationsLabel": "선택한 위치",
- "chooseLocationTrustedIpsItem": "다단계 인증 신뢰할 수 있는 IP",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "위치 선택",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "선택한 위치",
- "chooseLocationsEmpty": "위치 없음",
- "chooseLocationsExcludedSelectorTitle": "선택",
- "chooseLocationsIncludedSelectorTitle": "선택",
- "chooseLocationsNone": "없음",
- "chooseLocationsNoneFound": "\"{0}\"을(를) 찾을 수 없습니다. 다른 이름 또는 ID를 사용해 보세요.",
- "chooseLocationsPlural": "{0} 및 {1}개 더",
- "chooseLocationsRemove": "제거",
- "chooseLocationsReturnedPlural": "위치 {0}개 찾음",
- "chooseLocationsReturnedSingular": "위치 1개 찾음",
- "chooseLocationsSearchBalloon": "위치의 이름을 입력하여 검색합니다.",
- "chooseLocationsSearchHint": "위치를 검색합니다...",
- "chooseLocationsSearchLabel": "위치",
- "chooseLocationsSearching": "검색 중...",
- "chooseLocationsSelect": "선택",
- "chooseLocationsSelected": "선택됨",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "선택",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "선택",
- "chooseLocationsSingular": "{0} 및 1개 더",
- "chooseLocationsTooMany": "보다 많은 결과가 표시될 수 있습니다. 검색 상자를 사용해서 필터링하세요.",
- "claimProviderAddCommandText": "새 사용자 지정 컨트롤",
- "claimProviderAddNewBladeTitle": "새 사용자 지정 컨트롤",
- "claimProviderDeleteCommand": "삭제",
- "claimProviderDeleteDescription": "\"{0}\"을(를) 삭제하시겠습니까? 이 작업은 실행 취소할 수 없습니다.",
- "claimProviderDeleteTitle": "계속할까요?",
- "claimProviderEditInfoText": "클레임 공급자가 제공한 사용자 지정 컨트롤의 JSON을 입력하십시오.",
- "claimProviderNotificationCreateDescription": "사용자 지정 컨트롤 '{0}'을(를) 만드는 중입니다.",
- "claimProviderNotificationCreateFailedDescription": "사용자 지정 컨트롤 '{0}'을(를) 만들지 못했습니다. 나중에 다시 시도하십시오.",
- "claimProviderNotificationCreateFailedTitle": "사용자 지정 컨트롤을 만들지 못했습니다.",
- "claimProviderNotificationCreateSuccessDescription": "사용자 지정 컨트롤 '{0}'을(를) 만들었습니다.",
- "claimProviderNotificationCreateSuccessTitle": "{0} 만듦",
- "claimProviderNotificationCreateTitle": "{0}을(를) 만드는 중",
- "claimProviderNotificationDeleteDescription": "사용자 지정 컨트롤 '{0}'을(를) 삭제하는 중입니다.",
- "claimProviderNotificationDeleteFailedDescription": "사용자 지정 컨트롤 '{0}'을(를) 삭제하지 못했습니다. 나중에 다시 시도하십시오.",
- "claimProviderNotificationDeleteFailedTitle": "사용자 지정 컨트롤을 삭제하지 못했습니다.",
- "claimProviderNotificationDeleteSuccessDescription": "사용자 지정 컨트롤 '{0}'을(를) 삭제했습니다.",
- "claimProviderNotificationDeleteSuccessTitle": "'{0}'을(를) 삭제함",
- "claimProviderNotificationDeleteTitle": "'{0}'을(를) 삭제하는 중",
- "claimProviderNotificationUpdateDescription": "사용자 지정 컨트롤 '{0}'을(를) 업데이트하는 중입니다.",
- "claimProviderNotificationUpdateFailedDescription": "사용자 지정 컨트롤 '{0}'을(를) 업데이트하지 못했습니다. 나중에 다시 시도하십시오.",
- "claimProviderNotificationUpdateFailedTitle": "사용자 지정 컨트롤을 업데이트하지 못했습니다.",
- "claimProviderNotificationUpdateSuccessDescription": "사용자 지정 컨트롤 '{0}'을(를) 업데이트했습니다.",
- "claimProviderNotificationUpdateSuccessTitle": "\"{0}\"을(를) 업데이트함",
- "claimProviderNotificationUpdateTitle": "{0} 업데이트 중",
- "claimProviderValidationAppIdInvalid": "\"AppId\" 값이 잘못되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationClientIdMissing": "데이터에서 \"ClientId\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationControlClaimsRequestedMissing": "\"Control\"에서 \"ClaimsRequested\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "\"ClaimsRequested\" 항목에서 \"Type\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationControlIdAlreadyExists": "\"Control\" \"Id\" 값이 이미 있습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationControlIdMissing": "\"Control\"에서 \"Id\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "\"Control\" \"Id\" 값이 기존 정책에서 참조되기 때문에 해당 값을 제거할 수 없습니다. 먼저 해당 값을 정책에서 제거하십시오.",
- "claimProviderValidationControlIdTooManyControls": "\"Control\" 속성에 컨트롤이 너무 많습니다. 검토 후 다시 시도하세요.",
- "claimProviderValidationControlIdValueReserved": "\"Control\" \"Id\" 값이 예약된 키워드입니다. 다른 ID를 사용하십시오.",
- "claimProviderValidationControlNameAlreadyExists": "\"Control\" \"Name\" 값이 이미 있습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationControlNameMissing": "\"Control\"에서 \"Name\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationControlsMissing": "데이터에서 \"Controls\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationDiscoveryUrlMissing": "데이터에서 \"DiscoveryUrl\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationInvalid": "제공된 데이터가 잘못되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationInvalidJsonDefinition": "사용자 지정 컨트롤을 저장할 수 없습니다. JSON 텍스트를 검토하고 다시 시도하십시오.",
- "claimProviderValidationNameAlreadyExists": "\"Name\" 값이 이미 있습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationNameMissing": "데이터에서 \"Name\" 값이 누락되었습니다. 검토하고 다시 시도하십시오.",
- "claimProviderValidationUnknown": "제공된 데이터의 유효성을 검사하는 중 알 수 없는 오류가 발생했습니다. 검토하고 다시 시도하십시오.",
- "claimProvidersNone": "사용자 지정 컨트롤 없음",
- "claimProvidersSearchPlaceholder": "검색 컨트롤입니다.",
- "classicPoilcyFilterTitle": "표시",
- "classicPolicyAllPlatforms": "모든 플랫폼",
- "classicPolicyClientAppBrowserAndNative": "브라우저, 모바일 앱 및 데스크톱 클라이언트",
- "classicPolicyCloudAppTitle": "클라우드 애플리케이션",
- "classicPolicyControlAllow": "허용",
- "classicPolicyControlBlock": "차단",
- "classicPolicyControlBlockWhenNotAtWork": "작업 중이 아닐 때 액세스 차단",
- "classicPolicyControlRequireCompliantDevice": "준수 디바이스 필요",
- "classicPolicyControlRequireDomainJoinedDevice": "도메인 가입 디바이스 필요",
- "classicPolicyControlRequireMfa": "다단계 인증 필요",
- "classicPolicyControlRequireMfaWhenNotAtWork": "회사가 아닐 경우 다단계 인증 필요",
- "classicPolicyDeleteCommand": "삭제",
- "classicPolicyDeleteFailTitle": "클래식 정책을 삭제하지 못함",
- "classicPolicyDeleteInProgressTitle": "클래식 정책을 삭제하는 중",
- "classicPolicyDeleteSuccessTitle": "클래식 정책이 삭제됨",
- "classicPolicyDetailBladeTitle": "세부 정보",
- "classicPolicyDisableCommand": "사용 안 함",
- "classicPolicyDisableConfirmation": "'{0}'을(를) 사용하지 않도록 설정하시겠습니까? 이 작업은 실행 취소할 수 없습니다.",
- "classicPolicyDisableFailDescription": "'{0}'을(를) 사용하지 않도록 설정하지 못함",
- "classicPolicyDisableFailTitle": "클래식 정책을 사용하지 않도록 설정하지 못함",
- "classicPolicyDisableInProgressDescription": "'{0}'을(를) 사용하지 않도록 설정하는 중",
- "classicPolicyDisableInProgressTitle": "클래식 정책을 사용하지 않도록 설정하는 중",
- "classicPolicyDisableSuccessDescription": "'{0}'을(를) 사용하지 않도록 설정함",
- "classicPolicyDisableSuccessTitle": "클래식 정책 사용 안 함",
- "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync 지원 플랫폼",
- "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync 비지원 플랫폼",
- "classicPolicyExcludedPlatformsTitle": "제외된 디바이스 플랫폼",
- "classicPolicyFilterAll": "모든 정책",
- "classicPolicyFilterDisabled": "사용하지 않도록 설정된 정책",
- "classicPolicyFilterEnabled": "사용하도록 설정된 정책",
- "classicPolicyIncludeExcludeMembersDescription": "그룹을 제외하여 정책의 단계적 마이그레이션을 수행할 수 있습니다.",
- "classicPolicyIncludeExcludeMembersTitle": "그룹 포함/제외",
- "classicPolicyIncludedPlatformsTitle": "포함된 디바이스 플랫폼",
- "classicPolicyManualMigrationMessage": "이 정책은 수동으로 마이그레이션해야 합니다.",
- "classicPolicyMigrateCommand": "마이그레이션",
- "classicPolicyMigrateConfirmation": "'{0}'을(를) 마이그레이션하시겠습니까? 이 정책은 한 번만 마이그레이션할 수 있습니다.",
- "classicPolicyMigrateFailDescription": "'{0}'을(를) 마이그레이션하지 못함",
- "classicPolicyMigrateFailTitle": "클래식 정책을 마이그레이션하지 못함",
- "classicPolicyMigrateInProgressDescription": "'{0}'을(를) 마이그레이션하는 중",
- "classicPolicyMigrateInProgressTitle": "클래식 정책을 마이그레이션하는 중",
- "classicPolicyMigrateRecommendText": "권장 사항: 새 Azure Portal 정책을 마이그레이션하십시오.",
- "classicPolicyMigrateSuccessTitle": "클래식 정책을 마이그레이션함",
- "classicPolicyMigratedSuccessDescription": "이 클래식 정책은 이제 [정책]에서 관리할 수 있습니다.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "클래식 정책이 {0}개의 새 정책으로 마이그레이션되었습니다. 새 정책은 [정책]에서 관리할 수 있습니다.",
- "classicPolicyNoEditPermissionMsg": "이 정책을 편집할 수 있는 권한이 없습니다. 전역 관리자 및 보안 관리자만 정책을 편집할 수 있습니다. 자세한 내용을 알아보려면 여기를 클릭하세요.",
- "classicPolicySaveFailDescription": "'{0}'을(를) 저장하지 못함",
- "classicPolicySaveFailTitle": "클래식 정책을 저장하지 못함",
- "classicPolicySaveInProgressDescription": "'{0}'을(를) 저장하는 중",
- "classicPolicySaveInProgressTitle": "클래식 정책을 저장하는 중",
- "classicPolicySaveSuccessDescription": "'{0}'을(를) 저장함",
- "classicPolicySaveSuccessTitle": "클래식 정책이 저장됨",
- "clientAppBladeLegacyInfoBanner": "레거시 인증이 현재 지원되지 않음",
- "clientAppBladeLegacyUpsellBanner": "지원되지 않는 클라이언트 앱 차단(미리 보기)",
- "clientAppBladeTitle": "클라이언트 앱",
- "clientAppDescription": "이 정책이 적용될 클라이언트 앱 선택",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync는 현재 다른 모든 조건을 지원하지 않습니다.",
- "clientAppLearnMore": "사용자 액세스를 제어하여 최신 인증을 사용하지 않는 특정 클라이언트 애플리케이션을 대상으로 지정합니다.",
- "clientAppLegacyHeader": "레거시 인증 클라이언트",
- "clientAppMobileDesktop": "모바일 앱 및 데스크톱 클라이언트",
- "clientAppModernHeader": "최신 인증 클라이언트",
- "clientAppOnlySupportedPlatforms": "지원되는 플랫폼에만 정책 적용",
- "clientAppSelectSpecificClientApps": "클라이언트 앱 선택",
- "clientAppWebBrowser": "브라우저",
- "clientAppsSelectedLabel": "{0}개 포함됨",
- "clientTypeBrowser": "브라우저",
- "clientTypeEas": "Exchange ActiveSync 클라이언트",
- "clientTypeEasInfo": "레거시 인증만 사용하는 Exchange ActiveSync 클라이언트입니다.",
- "clientTypeModernAuth": "최신 인증 클라이언트",
- "clientTypeOtherClients": "기타 클라이언트",
- "clientTypeOtherClientsInfo": "여기에는 이전 버전의 Office 클라이언트와 기타 메일 프로토콜(POP, IMAP, SMTP 등)이 포함됩니다. [자세한 정보][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "이 정책에 구성된 클라우드 앱 {0}개가 디렉터리에서 삭제되었지만 정책에서 다른 앱에 영향을 주지 않습니다. 다음에 정책의 애플리케이션 섹션을 업데이트하면 삭제된 앱이 자동으로 제거됩니다.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "모든 Microsoft 앱",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Microsoft 클라우드, 데스크톱 및 모바일 앱 허용(미리 보기)",
- "cloudappsSelectionBladeAllCloudapps": "모든 클라우드 앱",
- "cloudappsSelectionBladeExcludeDescription": "정책에서 제외할 클라우드 앱 선택",
- "cloudappsSelectionBladeExcludedSelectorTitle": "제외된 클라우드 앱 선택",
- "cloudappsSelectionBladeIncludeDescription": "이 정책을 적용할 클라우드 앱 선택",
- "cloudappsSelectionBladeIncludedSelectorTitle": "선택",
- "cloudappsSelectionBladeSelectedCloudapps": "앱 선택",
- "cloudappsSelectorInfoBallonText": "사용자가 작업을 수행하기 위해 액세스하는 서비스입니다(예: 'Salesforce').",
- "cloudappsSelectorPluralExcluded": "제외된 앱 {0}개",
- "cloudappsSelectorPluralIncluded": "앱 {0}개 포함",
- "cloudappsSelectorSingularExcluded": "앱 1개 제외됨",
- "cloudappsSelectorSingularIncluded": "앱 1개 포함",
- "cloudappsSelectorUserPlural": "앱 {0}개",
- "cloudappsSelectorUserSingular": "앱 1개",
- "conditionLabelMulti": "조건 {0}개 선택됨",
- "conditionLabelOne": "조건 1개 선택됨",
- "conditionalAccessBladeTitle": "조건부 액세스",
- "conditionsNotSelectedLabel": "구성하지 못함",
- "conditionsReqMfaReauthSet": "현재 선택되어 있는 \"다단계 인증 필요\" 및 \"로그인 빈도(항상)\" 세션 제어로 인해 일부 옵션을 사용할 수 없습니다.",
- "conditionsReqPwSet": "현재 선택된 \"암호 변경 필요\" 권한으로 인해 일부 옵션을 사용할 수 없습니다.",
- "configureCasText": "Cloud App Security 구성",
- "configureCustomControlsText": "사용자 지정 정책 구성",
- "controlLabelMulti": "컨트롤 {0}개 선택됨",
- "controlLabelOne": "컨트롤 1개 선택됨",
- "controlValidatorText": "컨트롤을 하나 이상 선택하세요.",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "규격 디바이스를 요구하는 방법에 대해 자세히 알아보세요.",
- "controlsDeviceComplianceInfoBubble": "디바이스가 Intune을 준수해야 합니다. 디바이스가 Intune을 준수하지 않는 경우 사용자에게 디바이스의 준수를 요구하는 메시지가 표시됩니다.",
- "controlsDomainJoinedAriaLabel": "Microsoft Entra 하이브리드 조인 디바이스를 요구하는 방법에 대해 자세히 알아보세요.",
- "controlsDomainJoinedInfoBubble": "디바이스는 Microsoft Entra 하이브리드 조인되어야 합니다.",
- "controlsMamAriaLabel": "승인된 클라이언트 애플리케이션을 요구하는 방법에 대해 자세히 알아보세요.",
- "controlsMamInfoBubble": "디바이스가 이러한 승인된 클라이언트 애플리케이션을 사용해야 합니다.",
- "controlsMfaInfoBubble": "사용자는 전화 통화, 텍스트 등의 추가 보안 요구 사항을 완료해야 합니다.",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "정책으로 보호된 앱 요구 사항에 대해 자세히 알아보세요.",
- "controlsRequireCompliantAppInfoBubble": "디바이스가 정책으로 보호된 앱을 사용해야 합니다.",
- "controlsRequirePasswordResetAriaLabel": "암호 변경 요구 사항에 대해 자세히 알아봅니다.",
- "controlsRequirePasswordResetInfoBubble": "사용자 위험을 낮추기 위해 암호를 변경해야 합니다. 이 옵션을 사용하려면 다단계 인증도 필요합니다. 다른 제어는 사용할 수 없습니다.",
- "countriesRadiobuttonInfoBalloonContent": "사용자의 IP 주소에 따라 로그인하는 국가/지역입니다.",
- "createNewVpnCert": "새 인증서",
- "createdTimeLabel": "만든 시간",
- "customRoleLabel": "사용자 지정 역할(지원되지 않음)",
- "dateRangeTypeLabel": "날짜 범위",
- "daysOfWeekPlaceholderText": "요일 필터링",
- "daysOfWeekTypeLabel": "요일",
- "deletePolicyNoLicenseText": "이제 이 정책을 삭제할 수 있습니다. 삭제하는 경우 필요한 라이선스를 얻기 전까지 다시 만들 수 없습니다.",
- "descriptionContentForControlsAndOr": "여러 컨트롤의 경우",
- "devicePlatform": "디바이스 플랫폼",
- "devicePlatformConditionHelpDescription": "선택한 디바이스 플랫폼에 정책을 적용합니다.\n[자세한 정보][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0}개 포함됨",
- "devicePlatformIncludeExclude": "{0}, {1}개 제외됨",
- "devicePlatformNoSelectionError": "디바이스 플랫폼을 선택하려면 하위 항목을 하나 선택해야 합니다.",
- "devicePlatformsNone": "없음",
- "deviceSelectionBladeExcludeDescription": "정책에서 제외할 플랫폼 선택",
- "deviceSelectionBladeIncludeDescription": "이 정책에 포함할 디바이스 플랫폼 선택",
- "deviceStateAll": "모든 디바이스 상태",
- "deviceStateCompliant": "디바이스가 준수 상태로 표시됨",
- "deviceStateCompliantInfoContent": "Intune을 준수하는 디바이스는 이 정책의 평가에서 제외됩니다. 즉, 예를 들어 정책이 액세스를 차단하는 경우 Intune을 준수하는 디바이스 외의 모든 디바이스가 차단됩니다.",
- "deviceStateConditionConfigureInfoContent": "디바이스 상태에 따라 정책 구성",
- "deviceStateConditionSelectorInfoContent": "사용자가 로그인하는 장치가 'Microsoft Entra 하이브리드 조인'되었거나 '준수 표시'인지 여부입니다.\n 이 항목은 더 이상 사용되지 않습니다. '{1}'을(를) 대신 사용하세요.",
- "deviceStateConditionSelectorLabel": "디바이스 상태(사용되지 않음)",
- "deviceStateDomainJoined": "디바이스 Microsoft Entra 하이브리드 조인됨",
- "deviceStateDomainJoinedInfoContent": "Microsoft Entra 하이브리드 조인된 디바이스는 이 정책의 평가에서 제외되므로, 예를 들어 정책이 액세스를 차단하는 경우 Microsoft Entra 하이브리드 조인 디바이스를 제외한 모든 디바이스를 차단합니다.",
- "deviceStateDomainJoinedInfoLinkText": "자세히 알아보세요.",
- "deviceStateExcludeDescription": "정책에서 디바이스를 제외하는 데 사용된 디바이스 상태 조건을 선택합니다.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} 포함 및 {1} 제외",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} 포함 및 {1}, {2} 제외",
- "directoryRoleInfoContent": "기본 제공 디렉터리 역할에 정책을 할당합니다.",
- "directoryRolesLabel": "디렉터리 역할",
- "discardbutton": "취소",
- "downloadDefaultFileName": "IP 범위",
- "downloadExampleFileName": "예",
- "downloadExampleHeader": "수락될 수 있는 데이터의 종류를 보여주는 예제 파일입니다. #로 시작하는 줄은 무시됩니다.",
- "duplicate": "중복",
- "duplicatePolicyName": "{0} 복사",
- "endDatePickerLabel": "끝",
- "endTimePickerLabel": "종료 시간",
- "enterCountryText": "IP 주소와 국가/지역은 쌍으로 평가됩니다. 국가를 선택합니다.",
- "enterIpText": "IP 주소와 국가/지역은 쌍으로 평가됩니다. IP 주소를 입력합니다.",
- "enterUserText": "사용자를 선택하지 않았습니다. 사용자를 선택하세요.",
- "evaluationResult": "평가 결과",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "지원되는 플랫폼이 있는 Exchange ActiveSync만",
- "excludeAllTrustedLocationSelectorText": "모든 신뢰할 수 있는 위치 제외",
- "featureRequiresP2": "이 기능을 사용하려면 Microsoft Entra ID P2 라이선스가 필요합니다.",
- "friday": "금요일",
- "grantControls": "컨트롤 권한 부여",
- "gridNetworkTrusted": "인증 신뢰",
- "gridPolicyCreatedDateTime": "만든 날짜",
- "gridPolicyEnabled": "사용",
- "gridPolicyModifiedDateTime": "수정한 날짜",
- "gridPolicyName": "정책 이름",
- "gridPolicyState": "상태",
- "groupSelectionBladeExcludeDescription": "정책에서 제외할 그룹 선택",
- "groupSelectionBladeExcludedSelectorTitle": "제외된 그룹 선택",
- "groupSelectionBladeSelect": "그룹 선택",
- "groupSelectorInfoBallonText": "정책이 적용되는 디렉터리의 그룹입니다. 예: '파일럿 그룹'",
- "groupsSelectionBladeTitle": "그룹",
- "helpCommonScenariosText": "일반 시나리오에 관심이 있으신가요?",
- "helpCondition1": "사용자가 한 명이라도 회사 네트워크 외부에 있는 경우",
- "helpCondition2": "‘Managers’ 그룹의 사용자가 로그인하는 경우",
- "helpConditionsTitle": "조건",
- "helpControl1": "다단계 인증을 사용해서 로그인해야 합니다.",
- "helpControl2": "Intune 준수 디바이스 또는 도메인에 가입된 디바이스를 사용해야 합니다.",
- "helpControlsTitle": "컨트롤",
- "helpIntroText": "조건부 액세스를 사용하면 특정 조건이 발생하는 경우 액세스 요구 사항을 적용할 수 있습니다. 몇 가지 예제를 살펴보겠습니다.",
- "helpIntroTitle": "조건부 액세스란 무엇인가요?",
- "helpLearnMoreText": "조건부 액세스에 대해 자세히 알고 싶으신가요?",
- "helpStartStep1": "[+ 새 정책]을 클릭하여 첫 번째 정책 만들기",
- "helpStartStep2": "정책 조건 및 제어를 지정합니다.",
- "helpStartStep3": "완료한 후에는 정책을 사용하도록 설정하고 만듭니다.",
- "helpStartTitle": "시작",
- "highRisk": "높음",
- "includeAndExcludeAppsTextFormat": "포함: {0}. 제외: {1}.",
- "includeAppsTextFormat": "포함: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "알 수 없는 영역은 국가/지역으로 매핑할 수 없는 IP 주소입니다.",
- "includeUnknownAreasCheckboxLabel": "알 수 없는 영역 포함",
- "infoCommandLabel": "정보",
- "invalidCertDuration": "잘못된 인증서 기간",
- "invalidIpAddress": "값이 올바른 IP 주소여야 합니다.",
- "invalidReAuthSignInRiskOptionSelected": "\"매번 로그인 빈도\" 세션 제어는 \"로그인 위험\" 조건 제어에서 \"위험 없음\" 선택을 허용하지 않습니다.",
- "invalidUriErrorMsg": "유효한 URI를 입력하세요(예: 'uri:contoso.com:acr'). ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "전체 로드",
- "loading": "로딩 중...",
- "locationConfigureNamedLocationsText": "신뢰된 모든 위치를 구성",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "위치 이름이 너무 깁니다. 최대 길이는 256자입니다.",
- "locationSelectionBladeExcludeDescription": "정책에서 제외할 위치 선택",
- "locationSelectionBladeIncludeDescription": "이 정책에 포함할 위치 선택",
- "locationsAllLocationsLabel": "임의의 위치",
- "locationsAllNamedLocationsLabel": "신뢰할 수 있는 모든 IP",
- "locationsAllPrivateLinksLabel": "내 테넌트의 모든 사설 링크",
- "locationsIncludeExcludeLabel": "{0}, 모든 신뢰할 수 있는 IP 제외",
- "locationsSelectedPrivateLinksLabel": "선택한 사설 링크",
- "lowRisk": "낮음",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "조건부 액세스 정책을 관리하려면 조직에 Microsoft Entra ID P1 또는 P2가 필요합니다.",
- "manageSecurityDefaultsAriaLabel": "보안 기본 설정을 관리합니다.",
- "markAsTrustedCheckboxInfoBalloonContent": "신뢰할 수 있는 위치에서 로그인하면 사용자의 로그인 위험이 낮아집니다. 입력한 IP 범위가 조직에 설정되어 신뢰할 수 있는 경우 이 위치만 신뢰할 수 있음으로 표시하세요.",
- "markAsTrustedCheckboxLabel": "신뢰할 수 있는 위치로 표시",
- "mediumRisk": "보통",
- "memberSelectionCommandRemove": "제거",
- "menuItemClaimProviderControls": "사용자 지정 제어(미리 보기)",
- "menuItemClassicPolicies": "클래식 정책",
- "menuItemInsightsAndReporting": "인사이트 및 보고",
- "menuItemManage": "관리",
- "menuItemNamedLocationsPreview": "명명된 위치(미리 보기)",
- "menuItemNamedNetworks": "명명된 위치",
- "menuItemPolicies": "정책",
- "menuItemTermsOfUse": "사용 약관",
- "modifiedTimeLabel": "수정한 시간",
- "monday": "월요일",
- "nameLabel": "이름",
- "namedLocationCountryInfoBanner": "IPv4 주소만 국가/지역에 매핑됩니다. IPv6 주소는 알 수 없는 국가/지역에 포함되어 있습니다.",
- "namedLocationTypeCountry": "국가/지역",
- "namedLocationTypeLabel": "사용 위치 정의:",
- "namedLocationUpsellBanner": "이 보기는 더 이상 사용되지 않습니다. 새롭게 개선된 '명명된 위치' 보기로 이동합니다.",
- "namedLocationsHelpDescription": "명명된 위치는 가양성 및 Microsoft Entra ID 조건부 액세스 정책을 줄이기 위해 Microsoft Entra 보안 보고서에서 사용됩니다.\n[자세한 정보][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "새 IP 범위(예: 40.77.182.32/27) 추가",
- "namedNetworkCountryNeeded": "국가/지역을 하나 이상 선택해야 합니다.",
- "namedNetworkDeleteCommand": "삭제",
- "namedNetworkDeleteDescription": "\"{0}\"을(를) 삭제하시겠습니까? 이 작업은 실행 취소할 수 없습니다.",
- "namedNetworkDeleteTitle": "계속할까요?",
- "namedNetworkDownloadIpRange": "다운로드",
- "namedNetworkInvalidRange": "값은 올바른 IP 범위여야 합니다.",
- "namedNetworkIpRangeNeeded": "하나 이상의 유효한 IP 범위가 필요합니다.",
- "namedNetworkIpRangesDescriptionContent": "조직의 IP 범위 구성",
- "namedNetworkIpRangesTab": "IP 범위",
- "namedNetworkListAdd": "새 위치",
- "namedNetworkListConfigureTrustedIps": "다단계 인증 신뢰할 수 있는 IP 구성",
- "namedNetworkNameDescription": "예: 'Redmond 사무실'",
- "namedNetworkNameInvalid": "제공된 이름이 잘못되었습니다.",
- "namedNetworkNameRequired": "이 위치에 대한 이름을 제공해야 합니다.",
- "namedNetworkNoIpRanges": "IP 범위 없음",
- "namedNetworkNotificationCreateDescription": "이름이 '{0}'인 위치를 만드는 중",
- "namedNetworkNotificationCreateFailedDescription": "'{0}' 위치를 만들지 못했습니다. 나중에 다시 시도하세요.",
- "namedNetworkNotificationCreateFailedTitle": "위치를 만들지 못함",
- "namedNetworkNotificationCreateSuccessDescription": "이름이 '{0}'인 위치를 만듦",
- "namedNetworkNotificationCreateSuccessTitle": "{0} 만듦",
- "namedNetworkNotificationCreateTitle": "{0}을(를) 만드는 중",
- "namedNetworkNotificationDeleteDescription": "이름이 '{0}'인 위치를 삭제하는 중",
- "namedNetworkNotificationDeleteFailedDescription": "'{0}' 위치를 삭제하지 못했습니다. 나중에 다시 시도하세요.",
- "namedNetworkNotificationDeleteFailedTitle": "위치를 삭제하지 못함",
- "namedNetworkNotificationDeleteSuccessDescription": "이름이 '{0}'인 위치를 삭제함",
- "namedNetworkNotificationDeleteSuccessTitle": "'{0}'을(를) 삭제함",
- "namedNetworkNotificationDeleteTitle": "'{0}'을(를) 삭제하는 중",
- "namedNetworkNotificationUpdateDescription": "이름이 '{0}'인 위치를 업데이트 중",
- "namedNetworkNotificationUpdateFailedDescription": "'{0}' 위치를 업데이트하지 못했습니다. 나중에 다시 시도하세요.",
- "namedNetworkNotificationUpdateFailedTitle": "위치를 업데이트하지 못함",
- "namedNetworkNotificationUpdateSuccessDescription": "이름이 '{0}'인 위치를 업데이트함",
- "namedNetworkNotificationUpdateSuccessTitle": "\"{0}\"을(를) 업데이트함",
- "namedNetworkNotificationUpdateTitle": "{0} 업데이트 중",
- "namedNetworkSearchPlaceholder": "위치를 검색합니다.",
- "namedNetworkUploadFailedDescription": "제공된 파일을 구문 분석하는 데 오류가 발생했습니다. 각 줄이 CIDR 형식으로 된 일반 텍스트 파일을 업로드했는지 확인하세요.",
- "namedNetworkUploadFailedTitle": "'{0}'을(를) 구문 분석하지 못했습니다.",
- "namedNetworkUploadInProgressDescription": "'{0}'의 CIDR 값을 구문 분석하려고 시도하는 중입니다.",
- "namedNetworkUploadInProgressTitle": "'{0}' 구문 분석 중",
- "namedNetworkUploadInvalidDescription": "'{0}'이(가) 너무 크거나 잘못된 형식입니다.",
- "namedNetworkUploadInvalidTitle": "'{0}'이(가) 잘못됨",
- "namedNetworkUploadIpRange": "업로드",
- "namedNetworkUploadSuccessDescription": "{0}줄을 분석했습니다. {1}의 형식이 잘못되었습니다. {2}줄을 건너뛰었습니다.",
- "namedNetworkUploadSuccessTitle": "'{0}' 구문 분석을 마침",
- "namedNetworksAdd": "새 명명된 위치",
- "namedNetworksConditionHelpDescription": "물리적 위치에 따라 사용자 액세스를 제어합니다.\n[자세한 정보][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0}, {1}개 제외됨",
- "namedNetworksHelpDescription": "명명된 위치는 가양성 및 Microsoft Entra ID 조건부 액세스 정책을 줄이기 위해 Microsoft Entra 보안 보고서에서 사용됩니다.\n[자세한 정보][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0}개 포함됨",
- "namedNetworksNone": "명명된 위치를 찾을 수 없습니다.",
- "namedNetworksTitle": "위치 구성",
- "namednetworkExceedingSizeErrorBladeTitle": "오류 정보",
- "namednetworkExceedingSizeErrorDetailText": "자세한 내용을 보려면 여기를 클릭하세요.",
- "namednetworkExceedingSizeErrorMessage": "명명된 위치에 허용되는 최대 스토리지 수를 초과했습니다. 더 짧은 목록으로 다시 시도하세요. 자세한 내용을 보려면 여기를 클릭하세요.",
- "needMfaSecondary": "\"2차 인증 방법만\"에서 \"로그인 빈도(항상)\"를 선택한 경우 \"다단계 인증 필요\"를 선택해야 합니다.",
- "needMfaSpecificApps": "특별히 지원되는 앱을 선택하는 경우 “매번 로그인 빈도” 세션 제어에 “다단계 인증 필수” 권한 부여 제어가 필요합니다.",
- "newCertName": "새 인증서",
- "noAttributePermissionsError": "정책을 생성하거나 업데이트할 권한이 없습니다. 동적 필터를 추가/편집하려면 속성 정의 리더 역할이 필요합니다.",
- "noPolicyRowMessage": "정책 없음",
- "noSPSelected": "선택된 서비스 사용자가 없습니다.",
- "noUpdatePermissionMessage": "이러한 설정을 업데이트할 수 있는 권한이 없습니다. 액세스 권한을 얻으려면 전역 관리자에게 문의하세요.",
- "noUserSelected": "사용자 선택 안 됨",
- "noneRisk": "위험 없음",
- "office365Description": "이러한 앱에는 Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer 등이 포함됩니다.",
- "office365InfoBox": "선택한 앱 중 하나 이상이 Office 365에 속해 있습니다. 대신 Office 365 앱에서 이 정책을 설정하는 것이 좋습니다.",
- "oneUserSelected": "사용자가 한 명 선택됨",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "전역 관리자만 이 정책을 저장할 수 있습니다.",
- "or": "{0} 또는 {1}",
- "pickerDoneCommand": "완료",
- "policiesBladeAdPremiumUpsellBannerText": "Microsoft Entra ID Premium을 통해 클라우드 앱, 로그인 위험 및 장치 플랫폼과 같은 대상별 조건과 사용자 고유의 정책을 만듭니다.",
- "policiesBladeTitle": "정책",
- "policiesBladeTitleWithAppName": "정책: {0}",
- "policiesDisabledBannerText": "연결된 로그온 특성이 있는 애플리케이션의 정책 만들기와 편집은 금지됩니다.",
- "policiesHitMaxLimitStatusBarMessage": "이 테넌트에 대한 최대 정책 수에 도달했습니다. 추가 생성하기 전에 일부 정책을 삭제하세요.",
- "policyAssignmentsSection": "할당",
- "policyBlockAllInfoBox": "구성된 정책은 모든 사용자를 차단하므로 지원되지 않습니다. 할당 및 컨트롤을 검토합니다. 이 정책을 저장하려면 현재 사용자 {0}을(를) 제외합니다.",
- "policyCloudAppsDisplayTextAllApp": "모든 앱",
- "policyCloudAppsLabel": "클라우드 앱",
- "policyConditionClientAppDescription": "사용자가 클라우드 앱에 액세스하는 데 사용하는 소프트웨어입니다(예: '브라우저').",
- "policyConditionClientAppV2Description": "사용자가 클라우드 앱에 액세스하는 데 사용하는 소프트웨어입니다(예: '브라우저').",
- "policyConditionDevicePlatform": "디바이스 플랫폼",
- "policyConditionDevicePlatformDescription": "사용자가 로그인하는 플랫폼입니다(예: 'iOS').",
- "policyConditionLocation": "위치",
- "policyConditionLocationDescription": "사용자가 로그인하는 위치(IP 주소 범위를 사용하여 확인)입니다.",
- "policyConditionLocationPreview": "위치(미리 보기)",
- "policyConditionSigninRisk": "로그인 위험",
- "policyConditionSigninRiskDescription": "사용자 이외의 누군가가 로그인했을 가능성입니다. 위험 수준은 높음, 중간 또는 낮음이 될 수 있습니다. Microsoft Entra ID P2 라이선스가 필요합니다.",
- "policyConditionUserRisk": "사용자 위험",
- "policyConditionUserRiskDescription": "정책을 적용하기 위해 필요한 사용자 위험 수준 구성",
- "policyConditioniClientApp": "클라이언트 앱",
- "policyControlAllowAccessDisplayedName": "액세스 허용",
- "policyControlAuthenticationStrengthDisplayedName": "인증 강도 필요(미리 보기)",
- "policyControlBladeTitle": "허용",
- "policyControlBlockAccessDisplayedName": "액세스 차단",
- "policyControlCompliantDeviceDisplayedName": "준수 상태로 표시된 디바이스 필요",
- "policyControlContentDescription": "액세스를 차단하거나 부여하기 위해 액세스 시행을 제어합니다.",
- "policyControlInfoBallonText": "액세스를 차단하거나, 액세스를 허용하기 위해 충족해야 하는 추가 요구 사항 선택",
- "policyControlMfaChallengeDisplayedName": "다단계 인증 필요",
- "policyControlRequireCompliantAppDisplayedName": "앱 보호 정책 필요",
- "policyControlRequireDomainJoinedDisplayedName": "Microsoft Entra 하이브리드 조인 디바이스 필요",
- "policyControlRequireMamDisplayedName": "승인된 클라이언트 앱 필요",
- "policyControlRequiredPasswordChangeDisplayedName": "암호 변경 필요",
- "policyControlSelectAuthStrength": "인증 강도 필요",
- "policyControlsNoControlsSelected": "컨트롤 0개 선택됨",
- "policyControlsSection": "액세스 제어",
- "policyCreatBladeTitle": "새로 만들기",
- "policyCreateButton": "만들기",
- "policyCreateFailedMessage": "오류: {0}",
- "policyCreateFailedTitle": "'{0}'을(를) 만들지 못함",
- "policyCreateInProgressTitle": "{0}을(를) 만드는 중",
- "policyCreateSuccessMessage": "'{0}'을(를) 만들었습니다. [정책을 사용하도록 설정]이 [켜기]로 설정되어 있으면 몇 분 후에 정책을 사용할 수 있습니다.",
- "policyCreateSuccessTitle": "'{0}'을(를) 만듦",
- "policyDeleteConfirmation": "\"{0}\"을(를) 삭제하시겠습니까? 이 작업은 실행 취소할 수 없습니다.",
- "policyDeleteFailTitle": "'{0}'을(를) 삭제하지 못함",
- "policyDeleteInProgressTitle": "'{0}'을(를) 삭제하는 중",
- "policyDeleteSuccessTitle": "'{0}'을(를) 삭제함",
- "policyEnforceLabel": "정책 사용",
- "policyErrorCannotSetSigninRisk": "로그인 위험 조건을 포함하는 정책을 저장할 권한이 없습니다.",
- "policyErrorNoPermission": "정책을 저장할 권한이 없습니다. 전역 관리자에게 문의하세요.",
- "policyErrorUnknown": "오류가 발생했습니다. 나중에 다시 시도하세요.",
- "policyFallbackWarningMessage": "MS Graph를 사용하여 '{0}'을(를) 만들거나 업데이트하지 못하여 AD Graph로 대체됩니다. 호환되지 않는 조건으로 MS Graph에 대한 정책 엔드포인트를 호출할 때 버그가 있을 가능성이 높으므로 다음 시나리오를 확인하세요.",
- "policyFallbackWarningTitle": "'{0}'을(를) 만들거나 업데이트하는 데 부분적으로 성공했습니다.",
- "policyNameCannotBeEmpty": "정책 이름은 비워 둘 수 없습니다.",
- "policyNameDevice": "디바이스 정책",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "모바일 앱 관리 정책",
- "policyNameMfaLocation": "다단계 인증 및 위치 정책",
- "policyNamePlaceholderText": "예: '디바이스 준수 앱 정책'",
- "policyNameTooLongError": "정책 이름이 너무 깁니다. 최대 256자 사용",
- "policyOff": "끄기",
- "policyOn": "설정",
- "policyReportOnly": "보고서 전용",
- "policyReviewSection": "검토",
- "policySaveButton": "저장",
- "policyStatusIconDescription": "정책을 사용함",
- "policyStatusIconEnabled": "상태 아이콘을 사용함",
- "policyTemplateName1": "{0} 브라우저 액세스에 대해 앱 적용 제한 사용",
- "policyTemplateName2": "관리되는 디바이스에서만 {0} 액세스 허용",
- "policyTemplateName3": "지속적인 액세스 평가 설정에서 마이그레이션된 정책",
- "policyTriggerRiskSpecific": "특정 위험 수준 선택",
- "policyTriggersInfoBalloonText": "정책을 적용할 때를 정의하는 조건입니다(예: '위치').",
- "policyTriggersNoConditionsSelected": "조건 0개 선택됨",
- "policyTriggersSelectorLabel": "조건",
- "policyUpdateFailedMessage": "오류: {0}",
- "policyUpdateFailedTitle": "{0} 업데이트 실패",
- "policyUpdateInProgressTitle": "{0} 업데이트 중",
- "policyUpdateSuccessMessage": "{0}을(를) 업데이트했습니다. [정책 사용]이 [켜기]로 설정되어 있으면 몇 분 후에 정책이 활성화됩니다.",
- "policyUpdateSuccessTitle": "{0} 업데이트 성공",
- "primaryCol": "주",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "보고서 전용 모드: 정책은 로그인할 때 평가 및 기록되지만 사용자에게 영향을 주지 않습니다.",
- "requireAllControlsText": "선택된 컨트롤이 모두 필요함",
- "requireCompliantDevice": "준수 디바이스 필요",
- "requireDomainJoined": "도메인에 가입된 디바이스 필요",
- "requireGrantReauth": "\"모든 클라우드 앱\"이 선택된 경우 \"로그인 빈도(항상)\" 세션 제어에는 \"다단계 인증 필요\" 또는 \"암호 변경 필요\" 제어가 필요합니다.",
- "requireMFA": "다단계 인증 필요",
- "requireMfaReauth": "\"로그인 빈도(항상)\" 세션 제어에는 \"로그인 위험\"에 대한 \"다단계 인증 필요\" 제어가 필요합니다.",
- "requireOneControlText": "선택된 컨트롤 중 하나 필요",
- "requirePasswordChangeReauth": "\"매번 로그인 빈도\" 세션 컨트롤에는 \"사용자 위험\"에 대한 \"암호 변경 필요\" 권한 부여 컨트롤이 필요합니다.",
- "requireRiskReauth": "\"모든 클라우드 앱\"이 선택된 경우 \"매번 로그인 빈도\" 세션 컨트롤에는 \"사용자 위험\" 또는 \"로그인 위험\" 세션 컨트롤이 필요합니다.",
- "requireRiskReauthRiskNotEnabled": "\"모든 클라우드 앱\"이 선택된 경우 \"매번 로그인 빈도\" 세션 컨트롤을 사용할 수 없습니다.",
- "requireRiskReauthSignInOnly": "\"모든 클라우드 앱\"이 선택된 경우 \"매번 로그인 빈도\" 세션 컨트롤에는 \"로그인 위험\" 세션 컨트롤이 필요합니다.",
- "requireRiskReauthUserOnly": "\"모든 클라우드 앱\"이 선택된 경우 \"매번 로그인 빈도\" 세션 컨트롤에는 \"사용자 위험\" 세션 컨트롤이 필요합니다.",
- "resetFilters": "필터 재설정",
- "sPRequired": "서비스 사용자 필요",
- "sPSelectorInfoBalloon": "테스트하려는 사용자 또는 서비스 사용자",
- "saturday": "토요일",
- "searchTextTooLongError": "검색 텍스트가 너무 깁니다. 최대 256자",
- "securityDefaultsPolicyName": "보안 기본값",
- "securityDefaultsTextMessage": "조건부 액세스 정책을 사용하도록 설정하려면 보안 기본값을 비활성화해야 합니다.",
- "securityDefaultsUpdateInProgressText": "보안 기본 업데이트가 진행 중입니다. 잠시 기다렸다가 다시 시도하세요.",
- "securityDefaultsWarningMessage": "조직의 보안 구성을 관리하려는 것 같습니다. 조건부 액세스 정책을 사용하도록 설정하기 전에 먼저 {0}보안 기본값을 사용하지 않도록 설정{1}해야 합니다.",
- "selectDevicePlatforms": "디바이스 플랫폼 선택",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "검색 위치",
- "selectedSP": "선택된 서비스 사용자",
- "servicePrincipalBladeExcludedSelectorTitle": "제외된 서비스 주체 선택",
- "servicePrincipalBladeIncludedSelectorTitle": "서비스 사용자 선택",
- "servicePrincipalDataGridAria": "사용 가능한 서비스 사용자 목록",
- "servicePrincipalDropDownLabel": "이 정책은 어떤 항목에 적용됩니까?",
- "servicePrincipalInfoBox": "정책 할당에서 '{0}' 선택으로 인해 일부 조건을 사용할 수 없습니다.",
- "servicePrincipalRadioAll": "소유한 모든 서비스 사용자",
- "servicePrincipalRadioSelect": "서비스 사용자 선택",
- "servicePrincipalSelectionsAria": "선택한 서비스 사용자 표",
- "servicePrincipalSelectorAria": "선택한 서비스 사용자 목록",
- "servicePrincipalSelectorMultiple": "{0} 서비스 사용자가 선택됨",
- "servicePrincipalSelectorSingle": "서비스 사용자 1명 선택됨",
- "servicePrincipalSpecificExc": "특정 서비스 주체 제외",
- "servicePrincipalSpecificInc": "특정 서비스 사용자 포함됨",
- "servicePrincipals": "서비스 원칙",
- "sessionControlBladeTitle": "세션",
- "sessionControlDescriptionContent": "세션 컨트롤을 기반으로 액세스를 제어하여 특정 클라우드 애플리케이션 내에서 제한된 환경을 사용하도록 설정합니다.",
- "sessionControlDisableInfo": "이 컨트롤은 지원되는 앱에서만 작동합니다. 현재 앱 적용 제한을 지원하는 클라우드 앱은 Office 365, Exchange Online 및 SharePoint Online뿐입니다. 자세히 알아보려면 여기를 클릭하세요.",
- "sessionControlInfoBallonText": "세션 컨트롤은 클라우드 앱 내에서 제한된 환경을 사용하도록 설정합니다.",
- "sessionControls": "세션 컨트롤",
- "sessionControlsAppEnforcedLabel": "앱 적용 제한 사용",
- "sessionControlsCasLabel": "조건부 액세스 앱 제어 사용",
- "sessionControlsSecureSignInLabel": "토큰 바인딩 필요",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0}개 포함됨",
- "signinRiskReauth": "\"다단계 인증 필요\" 및 \"로그인 빈도(항상)\" 세션 제어를 선택한 경우 \"로그인 위험\" 조건을 선택해야 합니다.",
- "signinRiskTriggerDescriptionContent": "로그인 위험 수준 선택",
- "singleTenantServicePrincipalInfoBallonText": "정책은 조직이 소유한 단일 테넌트 서비스 사용자에만 적용됩니다. 자세히 알아보려면 여기를 클릭하세요. ",
- "specificSigninRiskLevelsOption": "특정 로그인 위험 수준 선택",
- "specificUsersExcluded": "특정 사용자가 제외됨",
- "specificUsersIncluded": "특정 사용자가 포함됨",
- "specificUsersIncludedAndExcluded": "특정 사용자 제외 및 포함",
- "startDatePickerLabel": "시작",
- "startFreeTrial": "평가판 시작",
- "startTimePickerLabel": "시작 시간",
- "sunday": "일요일",
- "testButton": "What If",
- "thumbprintCol": "지문",
- "thursday": "목요일",
- "timeConditionAllTimesLabel": "항상",
- "timeConditionIntroText": "이 정책이 적용될 시간 구성",
- "timeConditionSelectorInfoBallonContent": "사용자가 로그인하는 시간입니다. 예: \"수요일, 오전 9시 - 오후 5시 PST\"",
- "timeConditionSelectorLabel": "시간(미리 보기)",
- "timeConditionSpecificLabel": "특정 시간(미리 보기)",
- "timeSelectorAllTimesText": "항상",
- "timeSelectorSpecificTimesText": "구성한 특정 시간",
- "timeZoneDropdownInfoBalloonContent": "시간 범위를 정의한 표준 시간대를 선택하세요. 이 정책은 모든 표준 시간대의 사용자에게 적용됩니다. 예를 들어 한 사용자의 '수요일, 오전 9시 - 오후 5시'는 다른 표준 시간대 사용자의 경우 '수요일, 오전 10시 - 오후 6시'가 됩니다.",
- "timeZoneDropdownLabel": "표준 시간대",
- "timeZoneDropdownPlaceholderText": "표준 시간대 선택",
- "tooManyPoliciesDescription": "지금은 처음 50개 정책만 표시됩니다. 모든 정책을 보려면 여기를 클릭하세요.",
- "tooManyPoliciesTitle": "50개가 넘는 정책이 있음",
- "trustedLocationStatusIconDescription": "위치를 신뢰할 수 있음",
- "trustedLocationStatusIconEnabled": "신뢰할 수 있는 상태 아이콘",
- "tuesday": "화요일",
- "uploadInBadState": "지정된 파일을 업로드할 수 없습니다.",
- "upsellAppsDescription": "중요한 애플리케이션에 대해 항상 또는 회사 네트워크 외부인 경우에만 다단계 인증을 요구합니다.",
- "upsellAppsTitle": "보안 애플리케이션",
- "upsellBannerText": "무료 Premium 평가판을 받아서 이 기능을 사용하세요.",
- "upsellDataDescription": "회사 리소스에 대한 액세스를 허용하려면 디바이스를 규격 또는 Microsoft Entra 하이브리드 조인으로 표시해야 합니다.",
- "upsellDataTitle": "보안 데이터",
- "upsellDescription": "조건부 액세스는 회사 데이터를 안전하게 유지하는 데 필요한 제어 및 보호를 제공하는 한편, 직원들이 모든 디바이스에서 최고의 작업을 수행할 수 있는 환경을 제공합니다. 예를 들어, 회사 네트워크 외부에서 액세스를 제한하거나 준수 정책을 충족하는 디바이스만 액세스하도록 제한할 수 있습니다.",
- "upsellRiskDescription": "Microsoft의 기계 학습 시스템을 통해 검색된 위험 이벤트에 대해 다단계 인증을 요구합니다.",
- "upsellRiskTitle": "위험으로부터 보호",
- "upsellTitle": "조건부 액세스",
- "upsellWhyTitle": "조건부 액세스를 사용하는 이유는 무엇인가요?",
- "userAppNoneOption": "없음",
- "userNamePlaceholderText": "사용자 이름 입력",
- "userNotSetSeletorLabel": "0명의 사용자 및 그룹이 선택됨",
- "userOnlySelectionBladeExcludeDescription": "정책에서 제외할 사용자 선택",
- "userOrGroupSelectionCountDiffBannerText": "이 정책에 구성된 {0}이(가) 디렉터리에서 삭제되었지만 정책에서 다른 사용자 및 그룹에 영향을 주지 않습니다. 다음에 정책을 업데이트하면 삭제된 사용자 및/또는 그룹이 자동으로 제거됩니다.",
- "userOrSPNotSetSelectorLabel": "0명의 사용자 또는 워크로드 ID가 선택됨",
- "userOrSPSelectionBladeTitle": "사용자 또는 워크로드 ID",
- "userOrSPSelectorInfoBallonText": "사용자, 그룹 및 서비스 사용자를 포함하여 정책이 적용되는 디렉터리의 ID",
- "userRequired": "사용자가 필요함",
- "userRiskErrorBox": "\"암호 변경 필요\" 권한을 선택하면 \"사용자 위험\" 조건을 선택해야 합니다.",
- "userRiskReauth": "\"암호 변경 필요\" 부여 및 \"매번 로그인 빈도\" 세션 제어가 선택된 경우 \"로그인 위험\"이 아닌 \"사용자 위험\" 조건을 선택해야 합니다.",
- "userSPRequired": "사용자 또는 서비스 주체 필요",
- "userSPSelectorTitle": "사용자 또는 워크로드 ID",
- "userSelectionBladeAllUsersAndGroups": "모든 사용자 및 그룹",
- "userSelectionBladeExcludeDescription": "정책에서 제외할 사용자 및 그룹 선택",
- "userSelectionBladeExcludeTabTitle": "제외",
- "userSelectionBladeExcludedSelectorTitle": "제외된 사용자 및 그룹 선택",
- "userSelectionBladeIncludeDescription": "이 정책이 적용될 사용자를 선택합니다.",
- "userSelectionBladeIncludeTabTitle": "포함",
- "userSelectionBladeIncludedSelectorTitle": "선택",
- "userSelectionBladeSelectUsers": "사용자 선택",
- "userSelectionBladeSelectedUsers": "사용자 및 그룹 선택",
- "userSelectionBladeTitle": "사용자 및 그룹",
- "userSelectorBladeTitle": "사용자",
- "userSelectorExcluded": "{0} 제외됨",
- "userSelectorGroupPlural": "그룹 {0}개",
- "userSelectorGroupSingular": "그룹 1개",
- "userSelectorIncluded": "{0}개 포함됨",
- "userSelectorInfoBallonText": "디렉터리에서 정책이 적용되는 사용자 및 그룹입니다(예: '파일럿 그룹').",
- "userSelectorSelected": "{0}이(가) 선택됨",
- "userSelectorTitle": "사용자",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} 사용자",
- "userSelectorUserSingular": "사용자 1명",
- "userSelectorWithExclusion": "{0} 및 {1}",
- "usersGroupsLabel": "사용자 및 그룹",
- "viewApprovedAppsText": "승인된 클라이언트 앱 목록 보기",
- "viewCompliantAppsText": "정책으로 보호된 클라이언트 앱 목록 보기",
- "viewPolicyInformation": "정책 정보 보기",
- "vpnBladeTitle": "VPN 연결",
- "vpnCertCreateFailedMessage": "오류: {0}",
- "vpnCertCreateFailedTitle": "{0}을(를) 만들지 못했습니다.",
- "vpnCertCreateInProgressTitle": "{0} 만드는 중",
- "vpnCertCreateSuccessMessage": "{0}을(를) 만들었습니다.",
- "vpnCertCreateSuccessTitle": "{0}을(를) 만들었습니다.",
- "vpnCertNoRowsMessage": "VPN 인증서를 찾을 수 없음",
- "vpnCertUpdateFailedMessage": "오류: {0}",
- "vpnCertUpdateFailedTitle": "{0} 업데이트 실패",
- "vpnCertUpdateInProgressTitle": "{0} 업데이트 중",
- "vpnCertUpdateSuccessMessage": "{0}을(를) 업데이트했습니다.",
- "vpnCertUpdateSuccessTitle": "{0} 업데이트 성공",
- "vpnFeatureInfo": "VPN 연결 및 조건부 액세스에 대한 자세한 내용을 보려면 여기를 클릭하세요.",
- "vpnFeatureWarning": "Portal에서 VPN 인증서를 만들면 Microsoft Entra ID는 바로 VPN 클라이언트에 대해 짧은 수명의 인증서를 발급하는 데 사용됩니다. Vpn 클라이언트의 자격 증명 확인에 문제가 발생하지 않도록 vpn 인증서를 VPN 서버에 즉시 배포하는 것이 중요합니다.",
- "vpnMenuText": "VPN 연결",
- "vpncertDropdownDefaultOption": "기간",
- "vpncertDropdownInfoBalloonContent": "만들 인증서의 기간 선택",
- "vpncertDropdownLabel": "기간 선택",
- "vpncertDropdownOneyearOption": "1년",
- "vpncertDropdownThreeyearOption": "3년",
- "vpncertDropdownTwoyearOption": "2년",
- "wednesday": "수요일",
- "whatIfCountry": "국가/지역",
- "whatIfCountryInfo": "사용자가 로그인하는 국가/지역입니다.",
- "whatIfDevicePlatformInfo": "사용자가 로그인하는 디바이스 플랫폼입니다.",
- "whatIfEnterIpAddress": "IP 주소(예: 40.77.182.32) 입력",
- "whatIfErrorInvalidIpAddress": "잘못된 IP 주소를 지정했습니다.",
- "whatIfIpAddress": "IP 주소",
- "whatIfIpAddressInfo": "사용자가 로그인하는 IP 주소입니다.",
- "whatIfIpCountryInfoBoxText": "IP 주소 또는 국가/지역을 사용하는 경우 두 필드가 모두 필요하며 함께 올바르게 매핑되어야 합니다.",
- "whatIfSelectCountry": "국가/지역 선택...",
- "whatIfSelectDevicePlatform": "디바이스 플랫폼 선택...",
- "whatIfSelectPrivateLink": "프라이빗 링크 선택...",
- "whatIfSelectSignInRisk": "로그인 위험 선택",
- "whatIfSignInRisk": "로그인 위험",
- "whatIfSignInRiskInfo": "로그인과 관련된 위험 수준입니다.",
- "whatIfUnknownAreas": "알 수 없는 영역",
- "windows365InfoBox": "Windows 365를 선택하면 Cloud PC 및 Azure Virtual Desktop 세션 호스트에 대한 연결에 영향을 줍니다. 자세히 알아보려면 여기를 클릭하세요.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "워크로드 ID(미리 보기)",
- "workloadIdentitiesLicenseText": "이 정책을 편집하려면 워크로드 ID 프리미엄 P1 또는 P2 라이선스가 필요합니다.",
- "workloadIdentity": "워크로드 ID"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "지원되지 않음",
- "supportEnding": "지원 종료",
- "supported": "지원함"
- }
- },
- "SecurityTemplate": {
- "aSR": "공격 표면 감소",
- "accountProtection": "계정 보호",
- "allDevices": "모든 디바이스",
- "antivirus": "바이러스 백신",
- "antivirusReporting": "바이러스 백신 보고(미리 보기)",
- "conditionalAccess": "조건부 액세스",
- "deviceCompliance": "디바이스 준수",
- "diskEncryption": "디스크 암호화",
- "eDR": "엔드포인트 검색 및 응답",
- "ePM": "엔드포인트 권한 관리",
- "firewall": "방화벽",
- "helpSupport": "도움말 및 지원",
- "setup": "설치",
- "wdapt": "엔드포인트용 Microsoft Defender"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "실패",
- "hardReboot": "하드 재부팅",
- "retry": "다시 시도",
- "softReboot": "소프트 재부팅",
- "success": "성공"
- },
- "Columns": {
- "codeType": "코드 형식",
- "returnCode": "반환 코드"
- },
- "bladeTitle": "반환 코드",
- "gridAriaLabel": "반환 코드",
- "header": "설치 후 동작을 나타내기 위한 반환 코드 지정:",
- "onAddAnnounceMessage": "반환 코드를 통해 {0}/{1}개의 항목이 추가됨",
- "onDeleteSuccess": "반환 코드 {0}을(를) 삭제함",
- "returnCodeAlreadyUsedValidation": "반환 코드가 이미 사용되었습니다.",
- "returnCodeMustBeIntegerValidation": "반환 코드는 정수여야 합니다.",
- "returnCodeShouldBeAtLeast": "반환 코드는 {0} 이상이어야 합니다.",
- "returnCodeShouldBeAtMost": "반환 코드는 {0} 이하여야 합니다.",
- "selectorLabel": "반환 코드"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "아랍어",
- "bulgarian": "불가리아어",
- "chineseSimplified": "중국어(간체)",
- "chineseTraditional": "중국어(번체)",
- "croatian": "크로아티아어",
- "czech": "체코어",
- "danish": "덴마크어",
- "dutch": "네덜란드어",
- "englishUK": "영어(영국)",
- "englishUS": "영어(미국)",
- "estonian": "에스토니아어",
- "finnish": "핀란드어",
- "frenchCanada": "프랑스어(캐나다)",
- "frenchFrance": "프랑스어(프랑스)",
- "german": "독일어",
- "greek": "그리스어",
- "hebrew": "히브리어",
- "hungarian": "헝가리어",
- "italian": "이탈리아어",
- "japanese": "일본어",
- "korean": "한국어",
- "latvian": "라트비아어",
- "lithuanian": "리투아니아어",
- "norwegian": "노르웨이어, 보크밀",
- "polish": "폴란드어",
- "portugueseBrazil": "포르투갈어(브라질)",
- "portuguesePortugal": "포르투갈어(포르투갈)",
- "romanian": "루마니아어",
- "russian": "러시아어",
- "serbian": "세르바이어",
- "slovak": "슬로바키아어",
- "slovenian": "슬로베니아어",
- "spanishMexico": "스페인어(멕시코)",
- "spanishSpain": "스페인어(스페인)",
- "swedish": "스웨덴어",
- "thai": "태국",
- "turkish": "터키어",
- "ukrainian": "우크라이나어"
- },
- "Summary": {
- "placeholder": "내용을 미리 보려면 왼쪽의 알림 메시지를 선택합니다."
- },
- "companyContact": "연락처 정보 표시",
- "companyLogo": "회사 로고 표시",
- "companyName": "회사 이름 표시",
- "createEditDescription": "알림 메시지 템플릿을 만들거나 편집합니다.",
- "createMessage": "메시지 만들기",
- "deviceDetails": "장치 세부 정보 표시",
- "deviceDetailsInfoBox": "장치 세부 정보를 검색하면 이메일 알림 수신이 지연될 수 있으므로 이 설정은 기본적으로 꺼져 있습니다.",
- "editImpactInfo": "이 알림 메시지 템플릿을 편집하면 이 템플릿을 사용 중인 모든 정책에 영향을 줍니다.",
- "editMessage": "메시지 편집",
- "email": "전자 메일",
- "emailFooterTitle": "전자 메일 바닥글",
- "emailHeaderFooterInfo": "메일 알림의 메일 머리글 및 바닥글 설정은 Endpoint Manager의 테넌트 관리자 노드 내 사용자 지정 설정을 사용합니다.",
- "emailHeaderTitle": "전자 메일 헤더",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "사용자 지정 설정 구성",
- "formSubTitle": "알림 메일 만들기 또는 수정",
- "headerFooterSettingsTab": "머리글 및 바닥글 설정",
- "imgPreview": "이미지 미리 보기",
- "infotext": "알림 메시지를 선택합니다. 새 알림을 만들려면 [디바이스 준수 설정] 워크로드의 [관리] 섹션에서 [알림]으로 이동하세요.",
- "iwLink": "회사 포털 웹 사이트 링크 표시",
- "listEmpty": "메시지 템플릿이 없습니다.",
- "listEmptySelectOnly": "메시지 템플릿이 없습니다. 새 알림을 만들려면 [디바이스 준수 설정] 워크로드의 [관리] 섹션에서 [알림]으로 이동하세요.",
- "listSubTitle": "알림 메시지 템플릿 목록",
- "listTitle": "알림 메시지 템플릿",
- "localizedNotificationMessageTemplates": "지역화된 알림 메시지 템플릿",
- "messageAssigned": "이 메시지 템플릿은 현재 하나 이상의 준수 정책에서 사용되고 있으므로 삭제할 수 없습니다.",
- "messageCapitalized": "알림 메시지 템플릿",
- "messageLowercase": "알림 메시지 템플릿",
- "missingDefaultError": "기본 템플릿 선택",
- "notificationMessageTemplates": "알림 메시지 템플릿",
- "rowValidationError": "메시지 템플릿이 하나 이상 필요함",
- "selectDescription": "알림 메시지를 선택하세요. 새 알림을 만들려면 [디바이스 준수 설정] 워크로드의 [관리] 섹션에서 [알림]으로 이동하세요.",
- "tenantValueText": "테넌트 값",
- "testEmailLabel": "미리 보기 메일 보내기",
- "localeLabel": "로캘",
- "isDefaultLocale": "기본값 여부"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "다시 시작이 적용될 때까지 대기할 일 수"
- },
"Description": {
"label": "설명"
},
+ "FeatureDeploymentSettings": {
+ "header": "기능 배포 설정"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "이 기능은 디바이스를 다운그레이드할 수 없습니다.",
+ "label": "배포할 기능 업데이트"
+ },
+ "GradualRolloutEndDate": {
+ "label": "마지막 그룹 가용성"
+ },
+ "GradualRolloutInterval": {
+ "label": "그룹 사이 일 수"
+ },
+ "GradualRolloutStartDate": {
+ "label": "첫 번째 그룹 가용성"
+ },
"Name": {
"label": "이름"
},
- "QualityUpdateRelease": {
- "label": "디바이스 OS 버전이 다음보다 작은 경우 품질 업데이트를 신속하게 설치:"
- },
- "bladeTitle": "Windows 10 이상의 품질 업데이트(미리 보기)",
- "loadError": "로드하지 못했습니다."
+ "OptionalUpdate": {
+ "label": "필수 또는 선택적 업데이트"
+ },
+ "RolloutOptions": {
+ "label": "롤아웃 옵션"
+ },
+ "RolloutSettings": {
+ "header": "Windows 업데이트에서 업데이트를 언제 사용할 수 있게 할까요?"
+ },
+ "ScopeSettings": {
+ "header": "이 정책의 범위 태그를 구성합니다."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "사용 가능한 첫 번째 날짜"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "사용 안 함",
+ "enabled": "사용",
+ "infoBalloonContent": "Windows 11에 적합하지 않은 디바이스에 최신 Windows 10 기능 업데이트를 설치할지 여부 제어",
+ "label": "장치에서 Windows 11을 실행할 수 없는 경우 최신 Windows 10 기능 업데이트 설치",
+ "notApplicable": "해당 없음",
+ "summaryLabel": "Windows 11을 실행할 수 없는 디바이스에 Windows 10 설치"
+ },
+ "bladeTitle": "기능 업데이트 배포",
+ "deploymentSettingsTitle": "배포 설정",
+ "loadError": "로드하지 못했습니다.",
+ "windows11EULA": "배포할 이 기능 업데이트를 선택하면 이 운영 체제를 장치에 적용할 때 (1) 해당 Windows 라이선스를 볼륨 라이선싱을 통해 구입했거나 (2) 조직을 구속할 권한이 있고 조직을 대신하여 여기에서 확인할 수 있는 Microsoft 소프트웨어 사용 조건을 수락한다는 데 동의하는 것입니다. {0}"
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\"이(가) 저장되었습니다.",
+ "newFeatureUpdateDeploymentCreated": "새 기능 업데이트 배포가 생성되었습니다."
+ },
"TabName": {
- "qualityUpdateSettings": "설정"
+ "deploymentSettings": "배포 설정",
+ "groupAssignmentSettings": "할당",
+ "scopeSettings": "범위 태그"
},
- "infoBoxText": "기존 Windows 10 이상의 운영체제를 설치한 디바이스의 업데이트 링 정책 외에 현재 사용 가능한 유일한 전용 품질 업데이트 컨트롤은 지정된 패치 수준보다 뒤쳐진 디바이스에 대한 품질 업데이트를 신속히 처리하는 기능입니다. 향후 추가 컨트롤이 제공될 예정입니다.",
- "licenseLearnMoreText": "필수 구성 요소 및 품질 업데이트 정책에 대해 자세히 알아보세요.",
- "licenseWarningBoxText": "품질 업데이트 정책을 만들려면 특정 라이선스가 필요합니다.",
- "warningBoxText": "소프트웨어 업데이트를 신속하게 처리하면 필요한 경우 규정 준수 상태에 도달하는 시간을 줄이는 데 도움이 될 수 있지만 최종 사용자의 생산성에 미치는 영향이 커집니다. 업무 시간 중에 시스템을 다시 시작할 가능성이 훨씬 증가하기 때문입니다."
+ "gradualRolloutLicenseWarning": "이 기능을 사용하려면 특정 라이선스가 필요합니다.",
+ "gradualRolloutLicenseWarningEdit": "이 기능을 선택하지 않고 정책을 저장할 때까지 이 기능을 계속 사용하고 구성할 수 있습니다.",
+ "licenseLearnMoreText": "필수 구성 요소 및 기능 업데이트 정책에 대해 자세히 알아보세요.",
+ "optionalUpdateWarning": "선택 기능은 Windows 11 업데이트에만 사용할 수 있습니다.",
+ "profileNameWarning": "이름은 64자 미만이어야 합니다.",
+ "specificLicensingRequired": "선택한 일부 기능에는 특정 라이선스가 필요합니다."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64비트",
- "thirtyTwoBit": "32비트"
- },
- "TACSettings": {
- "edgeSettings": "Edge 구성 설정",
- "edgeWindowsDataProtectionSettings": "Edge(Windows) 데이터 보호 설정 - 미리 보기",
- "edgeWindowsSettings": "Edge(Windows) 구성 설정 - 미리 보기",
- "generalAppConfig": "일반 앱 구성",
- "generalSettings": "일반 구성 설정",
- "outlookSMIMEConfig": "Outlook S/MIME 설정",
- "outlookSettings": "Outlook 구성 설정",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "네트워크 경계 추가",
- "addNetworkBoundaryButton": "네트워크 경계 추가...",
- "allowWindowsSearch": "Windows Search에서 암호화된 회사 데이터 및 스토어 앱을 검색할 수 있도록 허용",
- "authoritativeIpRanges": "엔터프라이즈 IP 범위 목록을 신뢰할 수 있음(자동 검색 안 함)",
- "authoritativeProxyServers": "엔터프라이즈 프록시 서버 목록을 신뢰할 수 있음(자동 검색 안 함)",
- "boundaryType": "경계 유형",
- "cloudResources": "클라우드 리소스",
- "corporateIdentity": "회사 ID",
- "dataRecoveryCert": "암호화된 데이터를 복구할 수 있도록 DRA(데이터 복구 에이전트) 인증서를 업로드합니다.",
- "editNetworkBoundary": "네트워크 경계 편집",
- "enrollmentState": "등록 상태",
- "iPv4Ranges": "IPv4 범위",
- "iPv6Ranges": "IPv6 범위",
- "internalProxyServers": "내부 프록시 서버",
- "maxInactivityTime": "디바이스가 유휴 상태로 전환된 후 디바이스의 PIN 또는 암호가 잠기게 되는 최대 허용 시간(분)",
- "maxPasswordAttempts": "디바이스가 초기화되기 전 허용되는 인증 실패 횟수",
- "mdmDiscoveryUrl": "MDM 검색 URL",
- "mdmRequiredSettingsInfo": "이 정책은 Windows 10 1주년 버전 이상에만 적용됩니다. 이 정책에서는 WIP(Windows Information Protection)를 사용하여 보호를 적용합니다.",
- "minimumPinLength": "PIN에 대해 필요한 최소 문자 수를 설정합니다.",
- "name": "이름",
- "networkBoundariesGridEmptyText": "추가하는 모든 네트워크 경계가 여기에 표시됩니다.",
- "networkBoundary": "네트워크 경계",
- "networkDomainNames": "네트워크 도메인",
- "neutralResources": "중립 리소스",
- "passportForWork": "Windows에 로그인하는 방법으로 비즈니스용 Windows Hello를 사용합니다.",
- "pinExpiration": "시스템에서 사용자에게 PIN을 변경하도록 요구하기 전에 PIN을 사용할 수 있는 기간(일)을 지정합니다.",
- "pinHistory": "다시 사용할 수 없는 사용자 계정에 연결할 수 있는 이전 PIN의 숫자를 지정합니다.",
- "pinLowercaseLetters": "비즈니스용 Windows Hello PIN에 소문자 사용을 구성합니다.",
- "pinSpecialCharacters": "비즈니스용 Windows Hello PIN에 특수 문자 사용을 구성합니다.",
- "pinUppercaseLetters": "비즈니스용 Windows Hello PIN에 대문자 사용을 구성합니다.",
- "protectUnderLock": "디바이스가 잠긴 경우 앱에서 회사 데이터에 액세스할 수 없도록 합니다. Windows 10 Mobile에만 적용됩니다.",
- "protectedDomainNames": "보호되는 도메인",
- "proxyServers": "프록시 서버",
- "requireAppPin": "디바이스 PIN이 관리될 때 앱 PIN을 사용 안 함",
- "requiredSettings": "필수 설정",
- "requiredSettingsInfo": "범위를 변경하거나 이 정책을 제거하면 회사 데이터의 암호가 해독됩니다.",
- "revokeOnMdmHandoff": "디바이스가 MDM에 등록될 때 보호된 데이터에 대한 액세스 취소",
- "revokeOnUnenroll": "등록 취소 시 암호화 키 취소",
- "rmsTemplateForEdp": "Azure RMS에 대해 사용할 템플릿 ID를 지정합니다.",
- "showWipIcon": "엔터프라이즈 데이터 보호 아이콘 표시",
- "type": "형식",
- "useRmsForWip": "WIP에 대해 Azure RMS 사용",
- "value": "값",
- "weRequiredSettingsInfo": "이 정책은 Windows 10 크리에이터스 업데이트 이상에만 적용됩니다. 이 정책에서는 WIP(Windows Information Protection) 및 Windows MAM을 사용하여 보호를 적용합니다.",
- "wipProtectionMode": "Windows Information Protection 모드",
- "withEnrollment": "등록 있음",
- "withoutEnrollment": "등록 없음"
+ "Platform": {
+ "all": "모두",
+ "android": "Android 디바이스 관리자",
+ "androidAOSP": "Android(AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android enterprise",
+ "common": "일반",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS 및 Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "알 수 없음",
+ "unsupported": "지원되지 않음",
+ "windows": "Windows",
+ "windows10": "Windows 10 이상",
+ "windows10CM": "Windows 10 이상(ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 이상",
+ "windows8And10": "Windows 8 및 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 이상",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 및 Windows Server(ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 이상(ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows PC"
+ },
+ "InstallIntent": {
+ "available": "등록된 디바이스에 사용 가능",
+ "availableWithoutEnrollment": "등록 유무에 상관없이 사용 가능",
+ "required": "필수",
+ "uninstall": "제거"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "필터",
+ "noFilters": "없음"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "작성자",
- "template": "템플릿 이름"
- },
- "Row": {
- "ariaLabel": "{1} 열 {2}의 {0} 행"
- }
- },
- "InventoryCatalog": {
- "subtitle": "처음부터 시작하고 사용 가능한 인벤토리 속성 라이브러리에서 원하는 속성을 선택하세요."
- },
- "SettingsCatalog": {
- "subtitle": "처음부터 시작하여 사용 가능한 설정 라이브러리에서 원하는 설정 선택",
- "title": "설정 카탈로그"
- },
- "Templates": {
- "subtitle": "템플릿에는 기능별로 구성된 설정 그룹이 포함되어 있습니다. 정책을 수동으로 빌드하지 않으려는 경우 또는 디바이스가 회사 네트워크에 액세스하도록 구성하려는 경우(예: WiFi 또는 VPN 구성) 템플릿을 사용합니다.",
- "title": "템플릿"
- },
- "noData": "정책 템플릿을 찾을 수 없음"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online 데스크톱 클라이언트",
- "visioProRetail": "Visio Online 플랜 2"
- },
- "Countries": {
- "ae": "아랍에미리트",
- "ag": "앤티가 바부다",
- "ai": "앵귈라",
- "al": "알바니아",
- "am": "아르메니아",
- "ao": "앙골라",
- "ar": "아르헨티나",
- "at": "오스트리아",
- "au": "오스트레일리아",
- "az": "아제르바이잔",
- "bb": "바베이도스",
- "be": "벨기에",
- "bf": "부르키나파소",
- "bg": "불가리아",
- "bh": "바레인",
- "bj": "베냉",
- "bm": "버뮤다",
- "bn": "브루나이",
- "bo": "볼리비아",
- "br": "브라질",
- "bs": "바하마",
- "bt": "부탄",
- "bw": "보츠와나",
- "by": "벨라루스",
- "bz": "벨리즈",
- "ca": "캐나다",
- "cg": "콩고 공화국",
- "ch": "스위스",
- "cl": "칠레",
- "cn": "중국",
- "co": "콜롬비아",
- "cr": "코스타리카",
- "cv": "카보베르데",
- "cy": "키프로스",
- "cz": "체코 공화국",
- "de": "독일",
- "dk": "덴마크",
- "dm": "도미니카",
- "do": "도미니카 공화국",
- "dz": "알제리",
- "ec": "에콰도르",
- "ee": "에스토니아",
- "eg": "이집트",
- "es": "스페인",
- "fi": "핀란드",
- "fj": "피지",
- "fm": "미크로네시아",
- "fr": "프랑스",
- "gb": "영국",
- "gd": "그레나다",
- "gh": "가나",
- "gm": "감비아",
- "gr": "그리스",
- "gt": "과테말라",
- "gw": "기니비사우",
- "gy": "가이아나",
- "hk": "홍콩",
- "hn": "온두라스",
- "hr": "크로아티아",
- "hu": "헝가리",
- "id": "인도네시아",
- "ie": "아일랜드",
- "il": "이스라엘",
- "in": "인도",
- "is": "아이슬란드",
- "it": "이탈리아",
- "jm": "자메이카",
- "jo": "요르단",
- "jp": "일본",
- "ke": "케냐",
- "kg": "키르기스스탄",
- "kh": "캄보디아",
- "kn": "세인트키츠 네비스",
- "kr": "대한민국",
- "kw": "쿠웨이트",
- "ky": "케이맨 제도",
- "kz": "카자흐스탄",
- "la": "라오스",
- "lb": "레바논",
- "lc": "세인트 루시아",
- "lk": "스리랑카",
- "lr": "라이베리아",
- "lt": "리투아니아",
- "lu": "룩셈부르크",
- "lv": "라트비아",
- "md": "몰도바 공화국",
- "mg": "마다가스카르",
- "mk": "북마케도니아",
- "ml": "말리",
- "mn": "몽골",
- "mo": "마카오",
- "mr": "모리타니",
- "ms": "몬트세라트",
- "mt": "몰타",
- "mu": "모리셔스",
- "mw": "말라위",
- "mx": "멕시코",
- "my": "말레이시아",
- "mz": "모잠비크",
- "na": "나미비아",
- "ne": "니제르",
- "ng": "나이지리아",
- "ni": "니카라과",
- "nl": "네덜란드",
- "no": "노르웨이",
- "np": "네팔",
- "nz": "뉴질랜드",
- "om": "오만",
- "pa": "파나마",
- "pe": "페루",
- "pg": "파푸아뉴기니",
- "ph": "필리핀",
- "pk": "파키스탄",
- "pl": "폴란드",
- "pt": "포르투갈",
- "pw": "팔라우",
- "py": "파라과이",
- "qa": "카타르",
- "ro": "루마니아",
- "ru": "러시아",
- "sa": "사우디아라비아",
- "sb": "솔로몬 제도",
- "sc": "세이셸",
- "se": "스웨덴",
- "sg": "싱가포르",
- "si": "슬로베니아",
- "sk": "슬로바키아",
- "sl": "시에라리온",
- "sn": "세네갈",
- "sr": "수리남",
- "st": "상투메 프린시페",
- "sv": "엘살바도르",
- "sz": "스와질란드",
- "tc": "터크스 케이커스",
- "td": "차드",
- "th": "태국",
- "tj": "타지키스탄",
- "tm": "투르크메니스탄",
- "tn": "튀니지",
- "tr": "터키",
- "tt": "트리니다드 토바고",
- "tw": "대만",
- "tz": "탄자니아",
- "ua": "우크라이나",
- "ug": "우간다",
- "us": "미국",
- "uy": "우루과이",
- "uz": "우즈베키스탄",
- "vc": "세인트 빈센트 그레나딘",
- "ve": "베네수엘라",
- "vg": "영국령 버진 아일랜드",
- "vn": "베트남",
- "ye": "예멘",
- "za": "남아프리카 공화국",
- "zw": "짐바브웨"
- },
- "OfficeUpdateChannel": {
- "current": "현재 채널",
- "deferred": "반기 엔터프라이즈 채널",
- "firstReleaseCurrent": "현재 채널(미리 보기)",
- "firstReleaseDeferred": "반기 엔터프라이즈 채널(미리 보기)",
- "monthlyEnterprise": "월 단위 기업 채널",
- "placeHolder": "하나 선택"
- },
- "AppProtection": {
- "allAppTypes": "모든 앱 유형을 대상으로 함",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Android 회사 프로필의 앱",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Microsoft Entra 공유 모드가 있는 Android Enterprise 전용 디바이스의 앱",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Android 오픈 소스 프로젝트 사용자 연결 디바이스의 앱",
- "appsOnAndroidOpenSourceProjectUserless": "Android 오픈 소스 프로젝트 사용자 없는 디바이스의 앱",
- "appsOnIntuneManagedDevices": "Intune 관리 디바이스의 앱",
- "appsOnUnmanagedDevices": "관리되지 않는 디바이스의 앱",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "MAC",
- "notAvailable": "사용할 수 없음",
- "windows10PlatformLabel": "Windows 10 이상",
- "withEnrollment": "등록 있음",
- "withoutEnrollment": "등록 없음"
- },
- "DisplayRoleTypes": {
- "builtInRole": "기본 제공 역할",
- "customCloudPCRole": "사용자 지정 Windows 365 역할",
- "customIntuneRole": "사용자 지정 Intune 역할",
- "customRole": "사용자 지정 역할"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0}은(는) 하나 이상의 정책 집합에 포함되어 있습니다. {0}을(를) 삭제하면 이러한 정책 집합을 통해 더 이상 할당할 수 없게 됩니다. 그래도 삭제하시겠습니까?",
- "contentWithError": "{0}은(는) 하나 이상의 정책 집합에 포함되어 있을 수 있습니다. {0}을(를) 삭제하면 이러한 정책 집합을 통해 더 이상 할당할 수 없게 됩니다. 그래도 삭제하시겠습니까?",
- "header": "이 제한을 삭제하시겠습니까?"
- },
- "DeviceLimit": {
- "description": "사용자가 등록할 수 있는 최대 디바이스 수를 지정합니다.",
- "header": "디바이스 개수 제한",
- "info": "각 사용자가 등록할 수 있는 디바이스 수를 정의합니다."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "1.0 이상이어야 합니다.",
- "android": "올바른 버전 번호를 입력합니다. 예: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "유효한 버전 번호를 입력합니다. 예: 5.0, 5.1.1",
- "iOS": "올바른 버전 번호를 입력합니다. 예: 9.0, 10.0, 9.0.2",
- "mac": "올바른 버전 번호를 입력하세요. 예: 10, 10.10, 10.10.1",
- "min": "최소값은 {0}보다 작을 수 없습니다.",
- "minMax": "최소 버전이 최대 버전보다 클 수 없습니다.",
- "windows": "10.0 이상이어야 합니다. 8.1 디바이스를 허용하려면 비워 둡니다.",
- "windowsMobile": "10.0 이상이어야 합니다. 8.1 디바이스를 허용하려면 비워 둡니다."
- },
- "allPlatformsBlocked": "모든 디바이스 플랫폼이 차단됩니다. 플랫폼 구성을 사용하려면 플랫폼 등록을 허용하세요.",
- "blockManufacturerPlaceHolder": "제조업체 이름",
- "blockManufacturersHeader": "차단된 제조업체",
- "cannotRestrict": "제한이 지원되지 않습니다.",
- "configurationDescription": "디바이스를 등록하기 위해 충족해야 하는 플랫폼 구성 제한을 지정합니다. 등록 후 준수 정책을 사용하여 디바이스를 제한할 수 있습니다. 버전을 major.minor.build로 정의합니다. 버전 제한은 회사 포털로 등록된 디바이스에만 적용됩니다. Intune은 기본적으로 디바이스를 개인 소유로 분류합니다. 디바이스를 회사 소유로 분류하려면 추가 작업이 필요합니다.",
- "configurationDescriptionLabel": "등록 제한 설정에 대해 자세히 알아보기",
- "configurations": "플랫폼 구성",
- "deviceManufacturer": "장치 제조업체",
- "header": "디바이스 유형 제한",
- "info": "등록할 수 있는 플랫폼, 버전 및 관리 유형을 정의합니다.",
- "manufacturer": "제조업체",
- "max": "최대",
- "maxVersion": "최대 버전",
- "min": "최소",
- "minVersion": "최소 버전",
- "newPlatforms": "새 플랫폼을 허용했습니다. 플랫폼 구성 업데이트를 고려하세요.",
- "personal": "개인적으로 소유함",
- "platform": "플랫폼",
- "platformDescription": "다음 플랫폼의 등록을 허용할 수 있습니다. 지원하지 않을 플랫폼만 차단합니다. 허용된 플랫폼에 대해 추가 등록 제한을 구성할 수 있습니다.",
- "platformSettings": "플랫폼 설정",
- "platforms": "플랫폼 선택",
- "platformsSelected": "{0}개의 플랫폼 선택됨",
- "type": "유형",
- "versions": "버전",
- "versionsRange": "최소/최대 범위 허용:",
- "windowsTooltip": "모바일 디바이스 관리를 통해 등록을 제한합니다. PC 에이전트 설치를 제한하지 않습니다. Windows 10 및 Windows 11 버전만 지원됩니다. Windows 8.1을 허용하려면 버전을 비워 두세요."
- },
- "Priority": {
- "saved": "제한 우선 순위를 저장했습니다."
- },
- "Row": {
- "announce": "우선 순위: {0}, 이름: {1}, 할당: {2}"
- },
- "Table": {
- "deployed": "배포됨",
- "name": "이름",
- "priority": "우선 순위"
- },
- "Type": {
- "limit": "디바이스 개수 제한",
- "type": "디바이스 유형 제한"
- },
- "allUsers": "모든 사용자",
- "androidRestrictions": "Android 제한 사항",
- "create": "제한 만들기",
- "defaultLimitDescription": "그룹 멤버 자격에 상관없이 모든 사용자에게 우선 순위가 가장 낮게 적용된 기본 디바이스 개수 제한입니다.",
- "defaultTypeDescription": "그룹 멤버 자격에 상관없이 모든 사용자에게 우선 순위가 가장 낮게 적용된 기본 디바이스 유형 제한입니다.",
- "defaultWhfbDescription": "그룹 멤버 자격과 상관없이 모든 사용자에게 우선 순위가 가장 낮게 적용된 기본 비즈니스용 Windows Hello 구성입니다.",
- "deleteMessage": "영향을 받는 사용자가 할당된 다음 최고 우선 순위 제한으로 제한되거나 다른 제한이 할당되지 않은 경우 기본 제한으로 제한됩니다.",
- "deleteTitle": "{0} 제한을 삭제할까요?",
- "descriptionHint": "제한 설정을 통해 특징이 지정된 비즈니스 사용 목적 또는 제한 수준을 간단히 설명합니다.",
- "edit": "편집 제한",
- "info": "디바이스는 사용자에게 할당된 우선 순위가 가장 높은 등록 제한을 준수해야 합니다. 디바이스 제한을 끌어서 우선 순위를 변경할 수 있습니다. 기본 제한은 모든 사용자에 대해 가장 낮은 우선 순위이며 사용자가 없는 등록을 제어합니다. 기본 제한을 편집할 수 있지만 삭제할 수는 없습니다.",
- "iosRestrictions": "iOS 제한 사항",
- "mDM": "MDM",
- "macRestrictions": "macOS 제한 사항",
- "maxVersion": "최대 버전",
- "minVersion": "최소 버전",
- "nameHint": "제한 집합 식별을 위해 표시되는 주 특성입니다.",
- "noAssignmentsStatusBar": "하나 이상의 그룹에 제한을 할당하세요. [속성]을 클릭하세요.",
- "nonAdminForbiddenCreateError": "제한을 만들거나 편집하거나 삭제하려면 Intune 서비스 또는 전역 관리자여야 합니다.",
- "nonAdminForbiddenEdit": "제한을 편집하려면 관리자여야 합니다.",
- "notFound": "제한을 찾을 수 없습니다. 이미 삭제되었을 수 있습니다.",
- "personallyOwned": "개인적으로 소유한 디바이스",
- "restriction": "제한",
- "restrictionLowerCase": "제한",
- "restrictionType": "Restriction type",
- "selectType": "제한 유형 선택",
- "selectValidation": "플랫폼 선택",
- "typeHint": "[디바이스 유형 제한]을 선택하여 디바이스 속성을 제한합니다. [디바이스 개수 제한]을 선택하여 사용자당 디바이스 수를 제한합니다.",
- "typeRequired": "제한 유형이 필요합니다.",
- "winPhoneRestrictions": "Windows Phone 제한 사항",
- "windowsECv1Info": "이전 등록 제한은 편집하거나 다시 할당할 수’없으며 삭제만 가능합니다.",
- "windowsECv2Info": "등록 제한을 드래그 앤 드롭하여 우선 순위를 지정할 수 있습니다. 아래에서 기본 및 미리 구성된 제한 사항을 확인하세요. 모든 새로운 등록 제한은 기본 및 사전 구성된 제한보다 우선 순위가 높습니다.",
- "windowsRestrictions": "Windows 제한 사항",
- "windowsRestrictionsPreview": "필터 기반 Windows 제한 사항(미리 보기)"
- },
- "InstallContextType": {
- "device": "디바이스",
- "deviceContext": "디바이스 컨텍스트",
- "user": "사용자",
- "userContext": "사용자 컨텍스트"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "설명",
- "placeholder": "설명 입력"
- },
- "NameTextBox": {
- "label": "이름",
- "placeholder": "이름 입력"
- },
- "PublisherTextBox": {
- "label": "게시자",
- "placeholder": "게시자 입력"
- },
- "VersionTextBox": {
- "label": "버전"
- },
- "headerDescription": "작성한 검색 및 재구성 스크립트에서 새 사용자 지정 스크립트 패키지를 만듭니다."
- },
- "ScopeTags": {
- "headerDescription": "스크립트 패키지를 할당할 그룹을 하나 이상 선택합니다."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "검색 스크립트",
- "placeholder": "입력 스크립트 텍스트",
- "requiredValidationMessage": "검색 스크립트를 입력하세요."
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "스크립트 서명 확인 적용"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "로그온된 자격 증명을 사용하여 이 스크립트 실행"
- },
- "RemediationScript": {
- "infoBox": "이 스크립트는 재구성 스크립트가 없기 때문에 검색 전용 모드에서 실행됩니다."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "재구성 스크립트",
- "placeholder": "입력 스크립트 텍스트"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "64비트 PowerShell에서 스크립트 실행"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "유효하지 않은 스크립트입니다. 스크립트에 사용된 하나 이상의 문자가 유효하지 않습니다."
- },
- "headerDescription": "작성한 스크립트에서 사용자 지정 스크립트 패키지를 만듭니다. 기본적으로 스크립트는 할당된 디바이스에서 매일 실행됩니다.",
- "infoBox": "이 스크립트는 읽기 전용입니다. 이 스크립트에 대한 일부 설정이 사용하지 않도록 설정될 수 있습니다."
- },
- "title": "사용자 지정 스크립트 만들기",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "간격",
- "time": "날짜 및 시간"
- },
- "Interval": {
- "day": "매일 반복",
- "days": "{0}일마다 반복",
- "hour": "매시간 반복",
- "hours": "{0}시간마다 반복",
- "month": "매달 반복",
- "months": "{0}개월마다 반복",
- "week": "매주 반복",
- "weeks": "{0}주마다 반복"
- },
- "Time": {
- "utc": "{0}(UTC)",
- "utcWithDate": "{0}(UTC)({1})",
- "withDate": "{0}({1})"
- }
- }
- },
- "Edit": {
- "title": "편집 - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "허용된 URL",
- "tooltip": "업무 중에 사용자가 액세스할 수 있는 사이트를 지정합니다. 다른 사이트는 허용되지 않습니다. 허용/차단 목록 중 하나만 구성할 수 있으며, 둘 다 구성할 수는 없습니다. "
- },
- "ApplicationProxyRedirection": {
- "header": "애플리케이션 프록시",
- "title": "애플리케이션 프록시 리디렉션",
- "tooltip": "앱 프록시 리디렉션을 사용하도록 설정하여 사용자에게 회사 링크 및 온-프레미스 웹앱에 대한 액세스 권한을 부여합니다."
- },
- "BlockedURLs": {
- "title": "차단된 URL",
- "tooltip": "업무 중에 사용자에 대해 차단되는 사이트를 지정합니다. 다른 사이트는 모두 허용됩니다. 허용/차단 목록 중 하나만 구성할 수 있으며, 둘 다 구성할 수는 없습니다. "
- },
- "Bookmarks": {
- "header": "관리형 책갈피",
- "tooltip": "업무 중에 Microsoft Edge를 사용할 때 사용자가 사용할 수 있는 책갈피로 지정된 URL 목록을 입력합니다.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "관리되는 홈페이지",
- "title": "홈페이지 바로 가기 URL",
- "tooltip": "사용자가 Microsoft Edge에서 새 탭을 열 때 검색 창 아래에 첫 번째 아이콘으로 표시되는 홈페이지 바로 가기를 구성합니다."
- },
- "PersonalContext": {
- "label": "제한된 사이트를 개인 컨텍스트로 리디렉션",
- "tooltip": "사용자가 제한된 사이트를 열기 위해 개인 컨텍스트로의 전환을 허용받아야 하는지를 구성합니다."
- }
- },
- "BooleanActions": {
- "allow": "허용",
- "block": "차단",
- "configured": "구성됨",
- "disable": "사용 안 함",
- "dontRequire": "필요 없음",
- "enable": "사용",
- "hide": "숨기기",
- "limit": "제한",
- "notConfigured": "구성되지 않음",
- "require": "필요",
- "show": "표시",
- "yes": "예"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "사용자가 선택적 업데이트로 사용할 수 있도록 설정",
- "optionalValue": "선택",
- "required": "사용자가 필수 업데이트로 사용할 수 있도록 설정",
- "requiredValue": "필수"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1일",
- "twoDays": "2일",
- "zeroDays": "0일"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "개요"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "디바이스, 사용자 또는 품질 업데이트 버전으로 검색합니다."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "iOS 소프트웨어 업데이트 프로필을 로드하지 못함"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS 업데이트 프로필",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "프로필"
- },
- "listLoadError": "iOS 소프트웨어 업데이트 프로필을 로드할 수 없습니다. 나중에 다시 시도하세요.",
- "lowercase": "iOS 업데이트 정책",
- "uppercase": "iOS 업데이트 정책"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "죄송합니다. Apple에 연결하여 사용 가능한 버전 목록을 가져올 수 없습니다. 나중에 다시 시도하거나 최신 버전으로 계속 작업을 수행하세요.",
- "latestUpdate": "최신 업데이트",
- "noLongerSupported": "선택한 버전은 더 이상 지원되지 않음",
- "olderVersionSelected": "이전 버전을 선택했으므로 디바이스에서 최신 버전으로 업데이트할 수 없도록 소프트웨어 업데이트의 표시 여부를 지연시키는 디바이스 제한 정책을 적용해야 합니다.",
- "prefix": "iOS/iPadOS 설치",
- "selectSupported": "Apple에서 지원하는 업데이트 버전 선택",
- "updateToInstall": "설치할 업데이트"
- },
- "Schedule": {
- "always": "다음 체크 인 시 업데이트",
- "duringTimeWindows": "예약된 시간 동안 업데이트",
- "header": "기본적으로 업데이트 정책이 디바이스에 할당되면 Intune에서 디바이스 체크 인 시 최신 업데이트를 배포합니다. 대신 사용자 지정된 시작 및 종료 시간으로 주간 일정을 만들 수 있습니다. 예약된 시간 이외에 업데이트하도록 선택하는 경우 예약된 시간이 끝날 때까지 Intune에서 업데이트를 배포하지 않습니다.",
- "infoBalloon": "업데이트를 수행되는 시기입니다. 예약된 시간 도중이나 그 이후로 업데이트를 예약하려면 추가 입력이 필요합니다.",
- "label": "일정 유형",
- "outsideActiveHours": "활성 시간 외의 업데이트(레거시)",
- "outsideTimeWindows": "예약된 시간 외의 시간에 업데이트",
- "timeWindow": "기간",
- "timeZone": "표준 시간대",
- "title": "정책 일정 설정 업데이트:",
- "weekly": "주별 일정",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "업데이트 시 디바이스에 설치할 iOS/iPadOS 버전입니다.",
- "label": "설치할 버전 선택"
- },
- "header": "프로필을 만들어 할당된 디바이스에서 최신 iOS/iPadOS 업데이트를 자동으로 설치하도록 적용합니다. 이러한 설정은 소프트웨어 업데이트 배포 방법과 시기를 결정합니다. 이 프로필은 사용자가 OS를 수동으로 업데이트하는 것을 방지하지 않습니다. 그렇지 않을 경우 디바이스 구성 제한 정책에 따라 최대 90일 동안 업데이트가 방지될 수 있습니다. 업데이트는 감독되는 디바이스에만 적용됩니다.",
- "notAvailable": "해당 사항 없음"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "표시할 iOS 업데이트 정책이 없습니다.",
- "macOsUpdates": "표시할 macOS 소프트웨어 업데이트 정책이 없습니다.",
- "windowsUpdates": "Windows 10 이상에서 표시할 업데이트 링이 없습니다."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "디바이스 이름",
- "deviceUpdateStatus": "디바이스 업데이트 상태",
- "lastUpdated": "마지막으로 업데이트한 날짜",
- "osVersion": "OS 버전",
- "userPrincipalName": "사용자 이름"
- },
- "maximumOSVersionFilter": "최대 OS 버전",
- "minimumOSVersionFilter": "최소 OS 버전",
- "noData": "표시할 데이터가 없음",
- "searchBoxPlaceholder": "디바이스 이름, 사용자 이름 또는 OS 버전별 검색",
- "title": "macOS 디바이스에 대한 계정 요약"
- },
- "Category": {
- "configurationDataFile": "구성 데이터 파일",
- "critical": "위험",
- "firmware": "펌웨어",
- "other": "기타"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "마지막으로 업데이트한 날짜",
- "successfulUpdateCount": "업데이트 배포 성공",
- "totalUpdateCount": "전체 업데이트가 배포됨",
- "updateCategory": "업데이트 범주",
- "updateCategoryStatus": "업데이트 범주 상태"
- },
- "noData": "표시할 데이터가 없음"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "macOS 소프트웨어 업데이트 프로필을 로드하지 못함"
- }
- },
- "State": {
- "available": "사용 가능한 공간",
- "commandFailed": "명령 실패",
- "downloadFailed": "다운로드 실패",
- "downloadInsufficientNetwork": "다운로드 네트워크 부족",
- "downloadInsufficientPower": "다운로드 전원 부족",
- "downloadInsufficientSpace": "다운로드 공간 부족",
- "downloaded": "다운로드됨",
- "downloading": "다운로드 중",
- "idle": "유휴 상태",
- "installFailed": "설치 실패",
- "installInsufficientPower": "설치 전원 부족",
- "installInsufficientSpace": "설치 공간 부족",
- "installing": "설치 중",
- "scheduled": "예약됨",
- "success": "성공",
- "unknown": "알 수 없음"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "마지막으로 업데이트한 날짜",
- "updateName": "업데이트 이름",
- "updateStatus": "상태 업데이트",
- "version": "버전"
- },
- "noData": "표시할 데이터가 없음",
- "searchBoxPlaceholder": "업데이트 이름 또는 버전별 검색"
- },
- "SummaryBlade": {
- "subtitle": "macOS 업데이트 프로필",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "프로필"
- },
- "error": "오류",
- "errorOrErrors": "오류",
- "errors": "오류",
- "listLoadError": "macOS 소프트웨어 업데이트 프로필을 로드할 수 없습니다. 나중에 다시 시도하세요.",
- "lowercase": "macOs 업데이트 정책",
- "other": "기타",
- "subtitle": "MacOS 소프트웨어 업데이트",
- "upToDate": "최신",
- "uppercase": "macOS 업데이트 정책"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "나중에 다시 시도하세요.",
- "title": "{0}을(를) 삭제하지 못했습니다."
- },
- "LoadAllConfigurationFailed": {
- "description": "나중에 다시 시도하세요."
- },
- "LoadConfigurationFailed": {
- "description": "나중에 다시 시도하세요.",
- "title": "{0}을(를) 로드하지 못했습니다."
- },
- "idWrongFormat": "프로필에 제공된 ID의 형식이 예상된 형식이 아닙니다."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "창을 하나 이상 선택해야 함",
- "tooMany": "최대 20개의 시간 창을 구성할 수 있음"
- }
- },
- "endDay": "종료일",
- "endTime": "종료 시간",
- "startDay": "시작일",
- "startTime": "시작 시간",
- "timeWindowError": "1시간 이상 이어지는 시간을 선택합니다."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Windows 10 이상용 업데이트 링 프로필을 로드하지 못했습니다."
- }
- },
- "SummaryBlade": {
- "subtitle": "Windows 10 이상용 링 업데이트",
- "title": "비즈니스용 Windows 업데이트"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 이상",
- "title": "Windows 10 이상용 링 업데이트"
- },
- "listLoadError": "Windows 10 이상용 업데이트 링 프로필을 로드할 수 없습니다. 나중에 다시 시도하세요.",
- "lowercase": "업데이트 링",
- "uppercase": "업데이트 링"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "정책 설정 업데이트",
- "updateRingSettings": "업데이트 링 설정"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "{0} 만들기",
- "edit": "{0} 편집"
- }
- },
- "notScannedYet": "아직 검사하지 않음",
- "outOfDateIosDevices": "오래된 iOS 장치"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "디바이스 제한(디바이스 소유자)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS 업데이트 정책"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "같음",
+ "greaterThan": "보다 큼",
+ "greaterThanOrEqualTo": "크거나 같음",
+ "lessThan": "보다 작음",
+ "lessThanOrEqualTo": "작거나 같음",
+ "notEqualTo": "같지 않음"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "스크립트 서명 확인 적용 및 자동으로 스크립트 실행",
+ "enforceSignatureCheckTooltip": "스크립트가 신뢰할 수 있는 게시자에 의해 서명되었는지 확인하려면 '예'를 선택합니다(경고나 메시지가 표시되지 않고 스크립트가 실행되도록 함). 스크립트가 차단 해제된 상태로 실행됩니다. 서명 확인 없이 최종 사용자 확인으로 스크립트를 실행하려면 '아니요'(기본값)를 선택합니다.",
+ "header": "사용자 지정 검색 스크립트 사용",
+ "runAs32Bit": "64비트 클라이언트에서 32비트 프로세스로 스크립트 실행",
+ "runAs32BitTooltip": "64비트 클라이언트에서 32비트 프로세스로 스크립트를 실행하려면 '예'를 선택합니다. 64비트 클라이언트에서 64비트 프로세스로 스크립트를 실행하려면 '아니요'(기본값)를 선택합니다. 32비트 클라이언트는 32비트 프로세스로 스크립트를 실행합니다.",
+ "scriptContent": "스크립트 콘텐츠",
+ "scriptFile": "스크립트 파일",
+ "scriptFileNotSelectedValidation": "스크립트 파일이 선택되지 않았습니다.",
+ "scriptFileTooltip": "클라이언트에서 앱의 존재를 검색하는 PowerShell 스크립트를 선택합니다. 스크립트가 0 값 종료 코드를 반환하고 STDOUT에 문자열 값을 쓰면 앱이 검색됩니다.",
+ "scriptSizeLimitValidation": "검색 스크립트가 허용되는 최대 크기를 초과합니다. 검색 스크립트의 크기를 줄여 이 문제를 해결합니다."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "만든 날짜",
+ "dateModified": "수정한 날짜",
+ "doesNotExist": "파일 또는 폴더 가 없습니다.",
+ "fileOrFolderExists": "파일 또는 폴더가 있음",
+ "sizeInMB": "크기(MB)",
+ "version": "문자열(버전)"
+ },
+ "associatedWith32Bit": "64비트 클라이언트에서 32비트 앱과 연결됨",
+ "associatedWith32BitTooltip": "64비트 클라이언트에서 32비트 컨텍스트에서 경로 환경 변수를 확장하려면 '예'를 선택합니다. 64비트 클라이언트에서 64비트 컨텍스트에서 경로 변수를 확장하려면 '아니요'(기본값)를 선택합니다. 32비트 클라이언트에서는 항상 32비트 컨텍스트가 사용됩니다.",
+ "detectionMethod": "검색 방법",
+ "detectionMethodTooltip": "앱의 존재 유효성을 검사하는 데 사용되는 검색 방법 유형을 선택합니다.",
+ "fileOrFolder": "파일 또는 폴더",
+ "fileOrFolderToolTip": "검색할 파일 또는 폴더입니다.",
+ "operator": "연산자",
+ "operatorTooltip": "비교의 유효성을 검사하는 데 사용되는 검색 방법의 연산자를 선택합니다.",
+ "path": "경로",
+ "pathTooltip": "검색할 파일 또는 폴더를 포함하는 폴더의 전체 경로입니다.",
+ "value": "값",
+ "valueTooltip": "선택한 검색 방법과 일치하는 값을 선택합니다. 데이터 검색 방법은 현지 시간으로 입력해야 합니다."
+ },
+ "GridColumns": {
+ "pathOrCode": "경로/코드",
+ "type": "종류"
+ },
+ "MsiRule": {
+ "operator": "연산자",
+ "operatorTooltip": "MSI 제품 버전 유효성 검사 비교의 연산자를 선택합니다.",
+ "productCode": "MSI 제품 코드",
+ "productCodeTooltip": "앱에 대해 유효한 MSI 제품 코드입니다.",
+ "productVersion": "값",
+ "productVersionCheck": "MSI 제품 버전 확인",
+ "productVersionCheckTooltip": "MSI 제품 코드 외에 MSI 제품 버전을 확인하려면 '예'를 선택합니다.",
+ "productVersionTooltip": "앱의 MSI 제품 버전을 입력합니다."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "정수 비교",
+ "keyDoesNotExist": "키가 없음",
+ "keyExists": "키가 있음",
+ "stringComparison": "문자열 비교",
+ "valueDoesNotExist": "값이 없음",
+ "valueExists": "값이 있음",
+ "versionComparison": "버전 비교"
+ },
+ "associatedWith32Bit": "64비트 클라이언트에서 32비트 앱과 연결됨",
+ "associatedWith32BitTooltip": "64비트 클라이언트에서 32비트 레지스트리를 검색하려면 '예'를 선택합니다. 64비트 클라이언트에서 64비트 레지스트리를 검색하려면 '아니요'(기본값)를 선택합니다. 32비트 클라이언트는 항상 32비트 레지스트리를 검색합니다.",
+ "detectionMethod": "검색 방법",
+ "detectionMethodTooltip": "앱의 존재 유효성을 검사하는 데 사용되는 검색 방법 유형을 선택합니다.",
+ "keyPath": "키 경로",
+ "keyPathTooltip": "검색할 값을 포함하는 레지스트리 항목의 전체 경로입니다.",
+ "operator": "연산자",
+ "operatorTooltip": "비교의 유효성을 검사하는 데 사용되는 검색 방법의 연산자를 선택합니다.",
+ "value": "값",
+ "valueName": "값 이름",
+ "valueNameTooltip": "검색할 레지스트리 값의 이름입니다.",
+ "valueTooltip": "선택한 검색 방법과 일치하는 값을 선택합니다."
+ },
+ "RuleTypeOptions": {
+ "file": "파일",
+ "mSI": "MSI",
+ "registry": "레지스트리"
+ },
+ "gridAriaLabel": "검색 규칙",
+ "header": "앱의 존재를 나타내는 규칙을 만듭니다.",
+ "noRulesSelectedPlaceholder": "규칙이 지정되지 않았습니다.",
+ "ruleTableLimit": "검색 규칙은 최대 25개까지 추가할 수 있음",
+ "ruleType": "규칙 유형",
+ "ruleTypeTooltip": "추가할 검색 규칙 유형을 선택합니다."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "사용자 지정 검색 스크립트 사용",
+ "manual": "수동으로 검색 규칙 구성"
+ },
+ "bladeTitle": "검색 규칙",
+ "header": "앱의 존재를 검색하는 데 사용되는 앱 관련 규칙을 구성합니다.",
+ "rulesFormat": "규칙 형식",
+ "rulesFormatTooltip": "수동으로 검색 규칙을 구성하도록 선택하거나 사용자 지정 스크립트를 사용하여 앱의 존재를 검색하도록 선택합니다.",
+ "selectorLabel": "검색 규칙"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "사용자 대신 Microsoft 소프트웨어 사용 조건에 동의",
"appSuiteConfigurationLabel": "앱 제품군 구성",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0}개의 언어가 선택됨",
"xmlConfigurationLabel": "XML 구성"
},
- "Filters": {
- "ruleSyntax": "규칙 구문",
- "filters": "필터"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "사용자가 설정을 변경할 수 있도록 허용",
- "tooltip": "사용자가 설정을 변경할 수 있도록 허용할지를 지정합니다."
- },
- "AllowWorkAccounts": {
- "title": "회사 또는 학교 계정만 허용",
- "tooltip": " 이 설정을 사용하도록 설정하면 사용자가 Outlook 내에서 개인 메일 및 스토리지 계정을 추가할 수 없습니다. 사용자가 Outlook에 개인 계정을 추가한 경우 개인 계정을 제거하라는 메시지가 표시됩니다. 사용자가 개인 계정을 제거하지 않으면 회사 또는 학교 계정을 추가할 수 없습니다."
- },
- "BlockExternalImages": {
- "title": "외부 이미지 차단",
- "tooltip": "블록 외부 이미지를 사용하도록 설정하면 앱에서 인터넷에 호스트되어 있는 메시지 본문에 포함된 이미지 다운로드를 방지합니다. 구성되지 않도록 설정하면 기본 앱 설정이 [끄기]로 설정됩니다."
- },
- "ConfigureEmail": {
- "title": "메일 계정 설정 구성"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "기본 앱 서명은 앱이 메시지 작성 중 기본 서명으로 “Android용 Outlook 다운로드”를 사용할지 여부를 나타냅니다. 설정이 [끄기]로 구성된 경우 기본 서명은 사용되지 않지만, 사용자가 고유한 서명을 추가할 수 있습니다.\r\n\r\n[구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다.",
- "iOS": "기본 앱 서명은 앱이 메시지 작성 중 기본 서명으로 “iOS용 Outlook 다운로드”를 사용할지 여부를 나타냅니다. 설정이 [끄기]로 구성된 경우 기본 서명은 사용되지 않지만, 사용자가 고유한 서명을 추가할 수 있습니다.\r\n\r\n[구성되지 않음]으로 설정된 경우 기본 앱 설정은 [켜기]로 설정됩니다."
- },
- "title": "기본 앱 서명"
- },
- "OfficeFeedReplies": {
- "title": "피드 검색",
- "tooltip": "피드 검색에는 가장 자주 액세스하는 Office 파일이 표시됩니다. 기본적으로, Delve가 해당 사용자에게 사용하도록 설정된 경우 이 피드를 사용할 수 있습니다. 구성되지 않음으로 설정하면 기본 앱 설정이 On으로 설정됩니다."
- },
- "OrganizeMailByThread": {
- "title": "스레드별로 메일 구성",
- "tooltip": "Outlook의 기본 동작은 메일 대화를 스레드된 대화 보기로 묶는 것입니다. 이 설정을 사용하지 않도록 설정하는 경우 Outlook은 각 메일을 개별적으로 표시하며 스레드별로 그룹화하지 않습니다."
- },
- "PlayMyEmails": {
- "title": "내 전자 메일 재생",
- "tooltip": "[내 전자 메일 재생] 기능은 앱에서 기본적으로 사용하도록 설정되어 있지 않지만 받은 편지함의 배너를 통해 적격 사용자로 기능의 수준이 올라갑니다. 이 기능이 [끄기]로 설정되면 앱에서 적격 사용자로 수준이 올라가지 않습니다. 사용자는 이 기능이 [끄기]로 설정된 경우에도 앱 내에서 [내 전자 메일 재생]을 수동으로 사용하도록 설정할 수 있습니다. [구성되지 않음]으로 설정하는 경우 기본 앱 설정은 [켜기]이며 적격 사용자로 기능의 수준이 올라갑니다."
- },
- "SuggestedReplies": {
- "title": "제안된 회신",
- "tooltip": "메시지를 여는 경우, Outlook에서 메시지 아래에 회신을 제안할 수 있습니다. 제안된 회신을 선택하면 회신을 보내기 전에 편집할 수 있습니다."
- },
- "SyncCalendars": {
- "title": "일정 동기화",
- "tooltip": "사용자가 Outlook 일정을 기본 일정 앱 및 데이터베이스와 동기화할 수 있는지 여부를 구성합니다."
- },
- "TextPredictions": {
- "title": "텍스트 예측",
- "tooltip": "Outlook에서 메시지를 작성할 때 단어와 구를 제안할 수 있습니다. Outlook에서 단어나 구를 제안하는 경우 수락하려면 제안된 단어나 구를 살짝 밉니다. [구성되지 않음]으로 설정하면 기본 앱 설정이 [켜기]로 설정됩니다."
- },
- "ThemesEnabled": {
- "title": "테마 사용",
- "tooltip": "사용자가 사용자 지정 시각적 개체 테마를 사용할 수 있는지 여부를 지정합니다."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS 디바이스"
- },
- "ManagedDesktop": {
- "adminContacts": "관리자 연락처",
- "appPackaging": "앱 패키징",
- "autopatchGroups": "자동 패치 그룹",
- "devices": "장치",
- "featureEnablement": "기능 활성화",
- "feedback": "피드백",
- "gettingStarted": "시작",
- "messages": "메시지",
- "onlineResources": "온라인 리소스",
- "policyHealth": "정책 상태",
- "policyHealthPreview": "정책 상태(미리 보기)",
- "releaseManagement": "릴리스 관리",
- "serviceRequests": "서비스 요청",
- "settings": "설정",
- "supportRequests": "지원 요청",
- "tenantEnrollment": "테넌트 등록",
- "tenantManagement": "테넌트 관리"
- },
- "actions": "비준수에 대한 작업",
- "advancedExchangeSettings": "Exchange Online 설정",
- "advancedThreatProtection": "엔드포인트용 Microsoft Defender",
- "allApps": "모든 앱",
- "allDevices": "모든 디바이스",
- "androidFotaDeployments": "Android FOTA 배포",
- "appBundles": "앱 번들",
- "appCategories": "앱 범주",
- "appConfigPolicies": "앱 구성 정책",
- "appConfigurationStatus": "앱 구성 상태",
- "appInstallStatus": "앱 설치 상태",
- "appLicences": "앱 라이선스",
- "appProtectionPolicies": "앱 보호 정책",
- "appProtectionStatus": "앱 보호 상태",
- "appSelectiveWipe": "앱 선택 초기화",
- "appleVppTokens": "Apple VPP 토큰",
- "apps": "앱",
- "assign": "할당",
- "assignedPermissions": "할당된 권한",
- "assignedRoles": "할당된 역할",
- "autopilotDeploymentReport": "Autopilot 배포(미리 보기)",
- "autopilotDeploymentReportV2": "Autopilot 배포 2.0(미리 보기)",
- "brandingAndCustomization": "사용자 지정",
- "cartProfiles": "카트 프로필",
- "certificateConnectors": "인증서 커넥터",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "클라우드 연결 디바이스(미리 보기)",
- "cloudPcActions": "클라우드 PC 작업(미리 보기)",
- "cloudPcMaintenanceWindows": "클라우드 PC 유지 관리 기간(미리 보기)",
- "compliancePolicies": "준수 정책",
- "complianceScriptManagement": "스크립트",
- "complianceScriptManagementPreview": "스크립트(미리 보기)",
- "complianceSettings": "준수 정책 설정",
- "conditionStatements": "조건 문",
- "conditions": "위치",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "구성 프로필",
- "configurationScripts": "구성 스크립트",
- "connectorsAndTokens": "커넥터 및 토큰",
- "corporateDeviceIdentifiers": "회사 디바이스 식별자",
- "customAttributes": "사용자 지정 특성",
- "customNotifications": "사용자 지정 알림",
- "deploymentSettings": "배포 설정",
- "derivedCredentials": "파생된 자격 증명",
- "deviceActions": "디바이스 작업",
- "deviceCategories": "디바이스 범주",
- "deviceCleanUp": "디바이스 정리 규칙",
- "deviceEnrollmentManagers": "디바이스 등록 관리자",
- "deviceExecutionStatus": "디바이스 상태",
- "deviceLimitEnrollmentRestrictions": "등록 디바이스 개수 제한",
- "deviceTypeEnrollmentRestrictions": "등록 디바이스 플랫폼 제한",
- "devices": "디바이스",
- "discoveredApps": "검색된 앱",
- "edgePolicies": "Microsoft Edge 정책",
- "embeddedSIM": "eSIM 셀룰러 프로필(미리 보기)",
- "enrollDevices": "디바이스 등록",
- "enrollmentFailures": "등록 오류",
- "enrollmentNotifications": "등록 알림(미리 보기)",
- "enrollmentRestrictions": "등록 제한",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange 서비스 커넥터",
- "failuresForCumulativeQualityUpdates": "Windows 누적 품질 업데이트 실패",
- "failuresForDriverUpdates": "Windows 드라이버 업데이트 실패",
- "failuresForFeatureUpdates": "기능 업데이트 실패",
- "failuresForQualityUpdates": "Windows 긴급 업데이트 오류",
- "featureFlighting": "기능 플라이팅",
- "featureUpdateDeployments": "Windows 10 이상의 기능 업데이트",
- "flighting": "플라이팅",
- "fotaUpdate": "펌웨어 무선 업데이트",
- "groupPolicy": "관리 템플릿",
- "groupPolicyAnalytics": "그룹 정책 분석",
- "helpSupport": "도움말 및 지원",
- "helpSupportReplacement": "도움말 및 지원({0})",
- "iOSAppProvisioning": "iOS 앱 프로비저닝 프로필",
- "incompleteUserEnrollments": "사용자 등록 미완료",
- "iosUpdates": "iOS/iPadOS용 정책 업데이트",
- "legacyPcManagement": "레거시 PC 관리",
- "macOSSoftwareUpdate": "macOS용 업데이트 정책",
- "macOSSoftwareUpdateAccountSummaries": "macOS 디바이스 설치 상태",
- "macOSSoftwareUpdateCategorySummaries": "소프트웨어 업데이트 요약",
- "macOSSoftwareUpdateStateSummaries": "업데이트",
- "managedGooglePlay": "관리되는 Google Play",
- "msfb": "비즈니스용 Microsoft 스토어",
- "myPermissions": "내 권한",
- "notifications": "알림",
- "officeApps": "Office 앱",
- "officeProPlusPolicies": "Office 앱 관련 정책",
- "onPremise": "온-프레미스",
- "onPremisesConnector": "Exchange ActiveSync 온-프레미스 커넥터",
- "onPremisesDeviceAccess": "Exchange ActiveSync 디바이스",
- "onPremisesManageAccess": "Exchange 온-프레미스 액세스",
- "outOfDateIosDevices": "iOS 디바이스에 대한 설치 오류",
- "overview": "개요",
- "partnerDeviceManagement": "파트너 디바이스 관리",
- "perUpdateRingDeploymentState": "업데이트 링 배포 상태별",
- "permissions": "사용 권한",
- "platformApps": "앱 {0}개",
- "platformDevices": "디바이스 {0}개",
- "platformEnrollment": "{0} 등록",
- "policies": "정책",
- "profiles": "프로필",
- "properties": "속성",
- "reports": "보고서",
- "retireNoncompliantDevices": "비규격 디바이스 사용 중지",
- "retireNoncompliantDevicesPreview": "비규격 디바이스 사용 중지(미리 보기)",
- "role": "역할",
- "scriptManagement": "스크립트",
- "securityBaselines": "보안 기준",
- "serviceToServiceConnector": "Exchange Online 커넥터",
- "servicenowConnector": "ServiceNow 커넥터",
- "shellScripts": "셸 스크립트",
- "teamViewerConnector": "TeamViewer Connector",
- "telecomeExpenseManagement": "Telecom Expense Management",
- "tenantAdmin": "테넌트 관리",
- "tenantAdministration": "테넌트 관리",
- "termsAndConditions": "사용 약관",
- "titles": "제목",
- "troubleshoot": "문제 해결",
- "troubleshootSupport": "문제 해결 및 지원",
- "user": "사용자",
- "userExecutionStatus": "사용자 상태",
- "wdacSupplementalPolicies": "S 모드 추가 정책",
- "win32CatalogUpdateApp": "엔터프라이즈 앱 관리 앱 업데이트",
- "win32CatalogUpdateAppInPreview": "Windows용 업데이트(Win32) 카탈로그 앱(미리 보기)",
- "windows10DriverUpdate": "Windows 10 이상용 드라이버 업데이트",
- "windows10QualityUpdate": "Windows 10 이상의 품질 업데이트",
- "windows10UpdateRings": "Windows 10 이상용 링 업데이트",
- "windows10XPolicyFailures": "Windows 10X 정책 실패",
- "windows365PartnerConnector": "Windows 365 파트너 커넥터",
- "windowsDiagnosticData": "Windows 데이터",
- "windowsEnterpriseCertificate": "Windows 엔터프라이즈 인증서",
- "windowsManagement": "스크립트",
- "windowsSideLoadingKeys": "Windows 테스트용 로드 키",
- "windowsSymantecCertificate": "Windows DigiCert 인증서",
- "windowsThreatReport": "위협 에이전트 상태"
- },
- "ScopeTypes": {
- "allDevices": "모든 디바이스",
- "allUsers": "모든 사용자",
- "allUsersAndDevices": "모든 사용자 및 모든 디바이스",
- "selectedGroups": "선택된 그룹"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search를 기본값으로 사용",
- "excel": "Excel",
- "groove": "OneDrive(Groove)",
- "lync": "비즈니스용 Skype",
- "oneDrive": "OneDrive 데스크톱",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone 및 iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "지원되지 않음",
+ "supportEnding": "지원 종료",
+ "supported": "지원함"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "기본값",
- "header": "업데이트 우선 순위",
- "postponed": "연기됨",
- "priority": "높은 우선 순위"
- },
- "AutoUpdateSupersededApps": {
- "label": "자동 업데이트",
- "sublabel": "대체된 앱을 회사 포털 사용자가 설치한 경우 대체하는 앱을 설치해야 합니다."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "배경",
- "displayText": "{0}에서 콘텐츠 다운로드",
- "foreground": "전경",
- "header": "배달 최적화 우선 순위"
- },
- "RestartGracePeriod": {
- "allowSnooze": "사용자가 다시 시작 알림을 다시 알리도록 허용",
- "countdownDialog": "다시 시작하기 전에 카운트다운 다시 시작 대화 상자를 표시할 시간(분) 선택",
- "durationInMinutes": "디바이스 다시 시작 유예 기간(분)",
- "snoozeDurationInMinutes": "다시 알림 기간(분) 선택"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "표준 시간대",
- "local": "디바이스 표준 시간대",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "날짜 및 시간",
- "deadlineTimeColumnLabel": "설치 최종 기한",
- "deadlineTimeDatePickerErrorMessage": "선택한 날짜는 사용 가능한 날짜 이후여야 합니다.",
- "deadlineTimeLabel": "앱 설치 최종 기한",
- "defaultTime": "가능하면 빨리",
- "infoText": "이 애플리케이션은 배포된 후 바로 사용할 수 있지만 아래에서 사용 가능 시간을 지정하는 경우는 예외입니다. 필수 애플리케이션인 경우 최종 설치 기한을 지정할 수 있습니다.",
- "specificTime": "특정 날짜 및 시간",
- "startTimeColumnLabel": "사용 가능",
- "startTimeDatePickerErrorMessage": "선택한 날짜는 마감 날짜 이전이어야 합니다.",
- "startTimeLabel": "앱 가용성"
- },
- "restartGracePeriodHeader": "유예 기간 다시 시작",
- "restartGracePeriodLabel": "디바이스 다시 시작 유예 기간",
- "summaryTitle": "최종 사용자 환경"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "선택한 요구 사항으로써 파일 또는 폴더입니다.",
- "pathToolTip": "검색할 파일 또는 폴더의 전체 경로입니다.",
- "property": "속성",
- "valueToolTip": "선택한 검색 방법과 일치하는 요구 사항 값을 선택합니다. 날짜 및 시간 요구 사항은 현지 형식으로 입력해야 합니다."
- },
- "GridColumns": {
- "pathOrScript": "경로/스크립트",
- "type": "형식"
- },
- "Registry": {
- "keyPath": "키 경로",
- "keyPathTooltip": "요구 사항으로써 값을 포함하는 레지스트리 항목의 전체 경로입니다.",
- "operator": "연산자",
- "operatorTooltip": "비교 연산자를 선택합니다.",
- "registryRequirement": "레지스트리 키 요구 사항",
- "registryRequirementTooltip": "레지스트리 키 요구 사항 비교를 선택합니다.",
- "valueName": "값 이름",
- "valueNameTooltip": "필요한 레지스트리 값의 이름입니다."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "모든 권장 드라이버 업데이트 자동 승인",
+ "manual": "드라이버 업데이트 수동 승인 및 배포"
+ },
+ "BulkActions": {
+ "button": "대량 작업"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "승인 방법:"
},
- "RequirementTypeOptions": {
- "fileType": "파일",
- "registry": "레지스트리",
- "script": "스크립트"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "부울",
- "dateTime": "날짜 및 시간",
- "float": "부동 소수점",
- "integer": "정수",
- "string": "문자열",
- "version": "버전"
- },
- "duplicateName": "스크립트 이름 {0}이(가)이미 사용 중입니다. 다른 이름을 입력하세요.",
- "enforceSignatureCheck": "스크립트 서명 확인 적용",
- "enforceSignatureCheckTooltip": "스크립트가 신뢰할 수 있는 게시자에 의해 서명되었는지 확인하려면 '예'를 선택합니다(경고나 메시지가 표시되지 않고 스크립트가 실행되도록 함). 스크립트가 차단 해제된 상태로 실행됩니다. 서명 확인 없이 최종 사용자 확인으로 스크립트를 실행하려면 '아니요'(기본값)를 선택합니다.",
- "loggedOnCredentials": "로그온된 자격 증명을 사용하여 이 스크립트 실행",
- "loggedOnCredentialsTooltip": "로그인한 디바이스 자격 증명을 사용하여 스크립트 실행",
- "operatorTooltip": "요구 사항 비교 연산자를 선택합니다.",
- "requirementMethod": "출력 데이터 형식 선택",
- "requirementMethodTooltip": "검색 일치 요구 사항을 확인할 때 사용하는 데이터 형식을 선택합니다.",
- "scriptContent": "스크립트 콘텐츠",
- "scriptFile": "스크립트 파일",
- "scriptFileTooltip": "클라이언트에서 앱의 존재를 검색하는 PowerShell 스크립트를 선택합니다. 앱이 검색되면 요구 사항 프로세스에서 0 값 종료 코드를 제공하고 STDOUT에 문자열 값을 씁니다.",
- "scriptName": "스크립트 이름",
- "value": "값",
- "valueTooltip": "선택한 검색 방법과 일치하는 요구 사항 값을 선택합니다. 날짜 및 시간 요구 사항은 현지 형식으로 입력해야 합니다."
+ "DeploymentDeferralInDays": {
+ "label": "이후에 업데이트를 사용할 수 있도록 설정",
+ "units": "(일)",
+ "value": "{0}일"
+ },
+ "DriverAction": {
+ "header": "아래에서 작업을 선택하세요.",
+ "label": "드라이버 작업",
+ "placeholder": "작업 선택"
},
- "bladeTitle": "요구 사항 규칙 추가",
- "createRequirementHeader": "요구 사항을 만듭니다.",
- "header": "추가 요구 사항 규칙 구성",
- "label": "추가 요구 사항 규칙",
- "noRequirementsSelectedPlaceholder": "요구 사항이 지정되지 않았습니다.",
- "requirementType": "요구 사항 유형",
- "requirementTypeTooltip": "요구 사항을 확인하는 방법을 결정하는 데 사용되는 검색 방법 유형을 선택합니다."
- },
- "architectures": "운영 체제 아키텍처",
- "architecturesTooltip": "앱을 설치하는 데 필요한 아키텍처를 선택합니다.",
- "bladeTitle": "요구 사항",
- "diskSpace": "필요한 디스크 공간(MB)",
- "diskSpaceTooltip": "앱을 설치하는 데 필요한 시스템 드라이브의 사용 가능한 디스크 공간입니다.",
- "header": "앱을 설치하기 전에 디바이스가 충족해야 하는 요구 사항 지정:",
- "maximumTextFieldValue": "값은 {0} 이하여야 합니다.",
- "minimumCpuSpeed": "필요한 최소 CPU 속도(MHz)",
- "minimumCpuSpeedTooltip": "앱을 설치하는 데 필요한 최소 CPU 속도입니다.",
- "minimumLogicalProcessors": "필요한 최소 논리 프로세서 수",
- "minimumLogicalProcessorsTooltip": "앱을 설치하는 데 필요한 최소 논리 프로세서 수입니다.",
- "minimumOperatingSystem": "최소 운영 체제",
- "minimumOperatingSystemTooltip": "앱을 설치하는 데 필요한 최소 운영 체제를 선택합니다.",
- "minumumTextFieldValue": "값은 {0} 이상이어야 합니다.",
- "physicalMemory": "필요한 실제 메모리(MB)",
- "physicalMemoryTooltip": "앱을 설치하는 데 필요한 실제 메모리(RAM)입니다.",
- "selectorLabel": "요구 사항",
- "validNumber": "유효한 숫자를 입력하세요."
- },
- "PolicySet": {
- "appManagement": "애플리케이션 관리",
- "assignments": "할당",
- "basics": "기본",
- "deviceEnrollment": "디바이스 등록",
- "deviceManagement": "디바이스 관리",
- "scopeTags": "범위 태그",
- "appConfigurationTitle": "앱 구성 정책",
- "appProtectionTitle": "앱 보호 정책",
- "appTitle": "앱",
- "iOSAppProvisioningTitle": "iOS 앱 프로비저닝 프로필",
- "deviceLimitRestrictionTitle": "디바이스 개수 제한",
- "deviceTypeRestrictionTitle": "디바이스 유형 제한",
- "enrollmentStatusSettingTitle": "등록 상태 페이지",
- "windowsAutopilotDeploymentProfileTitle": "Windows Autopilot 배포 프로필",
- "deviceComplianceTitle": "디바이스 준수 정책",
- "deviceConfigurationTitle": "디바이스 구성 프로필",
- "powershellScriptTitle": "Powershell 스크립트"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "포함된 드라이버"
+ },
+ "SelectDrivers": {
+ "header": "대량 작업에 포함할 드라이버 선택"
+ },
+ "SelectDriversToInclude": {
+ "button": "포함할 드라이버 선택"
+ },
+ "SelectLessDrivers": {
+ "validation": "최대 100개의 드라이버를 선택할 수 있습니다."
+ },
+ "SelectMoreDrivers": {
+ "validation": "드라이버를 한 개 이상 선택해야 합니다."
+ },
+ "SelectedDrivers": {
+ "label": "선택한 드라이버"
+ },
+ "availabilityDate": "Windows 업데이트에서 사용할 수 있도록 설정",
+ "bladeTitle": "드라이버 업데이트 Windows 10 이상(미리 보기)",
+ "lastSync": "마지막 동기화:",
+ "lastSyncDefaultText": "초기 인벤토리 수집 대기 중",
+ "loadError": "로드하지 못했습니다."
+ },
+ "DriverStatus": {
+ "approved": "승인됨",
+ "declined": "거절됨",
+ "export": "권장 드라이버 내보내는 중",
+ "needsReview": "검토 필요",
+ "paused": "일시 중지됨"
+ },
+ "DriversToReview": {
+ "text": "검토할 {0}"
+ },
+ "Subtitle": {
+ "automatic": "자동 승인 드라이버 업데이트 정책",
+ "manual": "수동 승인 드라이버 업데이트 정책"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "권장",
- "CountryNames": {
- "countryNameNR": "나우루",
- "countryNameBH": "바레인",
- "countryNameZA": "남아프리카 공화국",
- "countryNameJO": "요르단",
- "countryNameSD": "수단",
- "countryNameNU": "니우에",
- "countryNameCZ": "체코 공화국",
- "countryNameLT": "리투아니아",
- "countryNameTK": "토켈라우",
- "countryNameEC": "에콰도르",
- "countryNameVU": "바누아투",
- "countryNameUG": "우간다",
- "countryNameLI": "리히텐슈타인",
- "countryNameHK": "홍콩 특별 행정구",
- "countryNameGH": "가나",
- "countryNameSA": "사우디아라비아",
- "countryNamePG": "파푸아뉴기니",
- "countryNameBW": "보츠와나",
- "countryNameDG": "디에고 가르시아 섬",
- "countryNameIN": "인도",
- "countryNameHN": "온두라스",
- "countryNameRO": "루마니아",
- "countryNameKZ": "카자흐스탄",
- "countryNameLC": "세인트 루시아",
- "countryNameGE": "조지아",
- "countryNameTT": "트리니다드 토바고",
- "countryNameMP": "북마리아나 제도",
- "countryNameMV": "몰디브",
- "countryNameFI": "핀란드",
- "countryNameNO": "노르웨이",
- "countryNameEE": "에스토니아",
- "countryNameVE": "베네수엘라",
- "countryNameUZ": "우즈베키스탄",
- "countryNameME": "몬테네그로",
- "countryNameTJ": "타지키스탄",
- "countryNameAW": "아루바",
- "countryNameFR": "프랑스",
- "countryNameOM": "오만",
- "countryNameAO": "앙골라",
- "countryNameIT": "이탈리아",
- "countryNameAZ": "아제르바이잔",
- "countryNameKG": "키르기스스탄",
- "countryNameWF": "월리스 푸투나",
- "countryNameTL": "동티모르(Timor-Leste)",
- "countryNameFK": "포클랜드 제도(Islas Malvinas)",
- "countryNameGY": "가이아나",
- "countryNameSS": "남수단",
- "countryNameMM": "미얀마",
- "countryNameHT": "아이티",
- "countryNameSY": "시리아",
- "countryNameMD": "몰도바",
- "countryNameVC": "세인트 빈센트 그레나딘",
- "countryNameID": "인도네시아",
- "countryNameRE": "리유니언",
- "countryNameER": "에리트리아",
- "countryNameMK": "북마케도니아",
- "countryNameTG": "토고",
- "countryNamePF": "프랑스령 폴리네시아",
- "countryNameKY": "케이맨 제도",
- "countryNameIO": "영국령 인도양 식민지",
- "countryNameRU": "러시아",
- "countryNameMA": "모로코",
- "countryNameAU": "오스트레일리아",
- "countryNameBO": "볼리비아",
- "countryNameVA": "교황청(바티칸 시국)",
- "countryNameVG": "영국령 버진 아일랜드",
- "countryNameFM": "미크로네시아",
- "countryNameAQ": "남극 대륙",
- "countryNameZM": "잠비아",
- "countryNameBR": "브라질",
- "countryNameIS": "아이슬란드",
- "countryNamePE": "페루",
- "countryNameBG": "불가리아",
- "countryNamePR": "푸에르토리코",
- "countryNameGI": "지브롤터",
- "countryNameBS": "바하마",
- "countryNameJE": "저지",
- "countryNameMO": "마카오 특별행정구",
- "countryNameRW": "르완다",
- "countryNameAS": "미국령 사모아",
- "countryNameBQ": "보네르, 신트외스타티우스 및 사바",
- "countryNameMF": "세인트마틴",
- "countryNameTM": "투르크메니스탄",
- "countryNameML": "말리",
- "countryNameTO": "통가",
- "countryNameNC": "뉴칼레도니아",
- "countryNameAC": "어센션 섬",
- "countryNameBN": "브루나이",
- "countryNameBD": "방글라데시",
- "countryNameMW": "말라위",
- "countryNameGM": "감비아",
- "countryNameGA": "가봉",
- "countryNameCA": "캐나다",
- "countryNameSH": "세인트 헬레나",
- "countryNameYT": "마요트",
- "countryNameMN": "몽골",
- "countryNamePA": "파나마",
- "countryNameCM": "카메룬",
- "countryNameNE": "니제르",
- "countryNameCW": "퀴라소",
- "countryNameJP": "일본",
- "countryNameCY": "키프로스",
- "countryNameCD": "콩고 민주 공화국",
- "countryNameTN": "튀니지",
- "countryNameTR": "튀르키예",
- "countryNameWS": "사모아",
- "countryNameSE": "스웨덴",
- "countryNameXK": "코소보",
- "countryNameKH": "캄보디아",
- "countryNamePL": "폴란드",
- "countryNameDZ": "알제리",
- "countryNameLR": "라이베리아",
- "countryNameSO": "소말리아",
- "countryNameDM": "도미니카",
- "countryNameEG": "이집트",
- "countryNameGF": "프랑스령 기아나",
- "countryNameNZ": "뉴질랜드",
- "countryNamePS": "팔레스타인 자치 정부",
- "countryNameIL": "이스라엘",
- "countryNameSL": "시에라리온",
- "countryNameGR": "그리스",
- "countryNameNG": "나이지리아",
- "countryNameMR": "모리타니",
- "countryNameVI": "미국령 버진 아일랜드",
- "countryNameGQ": "적도 기니",
- "countryNameMX": "멕시코",
- "countryNameDJ": "지부티",
- "countryNameGN": "기니",
- "countryNameCN": "중국",
- "countryNameMZ": "모잠비크",
- "countryNameBV": "부베 섬",
- "countryNameNF": "노퍽 섬",
- "countryNameTZ": "탄자니아",
- "countryNameAI": "앵귈라",
- "countryNameGS": "사우스 조지아 및 사우스 샌드위치 제도",
- "countryNameRS": "세르비아",
- "countryNameCC": "코코스 제도",
- "countryNameNA": "나미비아",
- "countryNameDE": "독일",
- "countryNameCG": "콩고 공화국",
- "countryNameKW": "쿠웨이트",
- "countryNameMH": "마셜 제도",
- "countryNameVN": "베트남",
- "countryNameBY": "벨라루스",
- "countryNameMY": "말레이시아",
- "countryNameST": "상투메 프린시페",
- "countryNameLS": "레소토",
- "countryNameBI": "부룬디",
- "countryNameTD": "차드",
- "countryNameCX": "크리스마스 섬",
- "countryNameIR": "이란",
- "countryNameTV": "투발루",
- "countryNameGW": "기니비사우",
- "countryNameUA": "우크라이나",
- "countryNameCU": "쿠바",
- "countryNameCO": "콜롬비아",
- "countryNameNI": "니카라과",
- "countryNameHR": "크로아티아",
- "countryNameSC": "세이셸",
- "countryNameNL": "네덜란드",
- "countryNameUM": "미국령 군소 제도",
- "countryNameIM": "맨 섬",
- "countryNameFJ": "피지",
- "countryNameSR": "수리남",
- "countryNameGT": "과테말라",
- "countryNameSM": "산마리노",
- "countryNameLA": "라오스",
- "countryNameGB": "영국",
- "countryNameBB": "바베이도스",
- "countryNameSI": "슬로베니아",
- "countryNameAM": "아르메니아",
- "countryNameAR": "아르헨티나",
- "countryNamePM": "생피에르앤드미클롱",
- "countryNameTF": "프랑스령 남부와 남극지역",
- "countryNameDO": "도미니카 공화국",
- "countryNameZW": "짐바브웨",
- "countryNameMQ": "마르티니크",
- "countryNamePT": "포르투갈",
- "countryNameCF": "중앙 아프리카 공화국",
- "countryNameBE": "벨기에",
- "countryNameKM": "코모로",
- "countryNameLY": "리비아",
- "countryNameIE": "아일랜드",
- "countryNameKP": "북한",
- "countryNameGG": "건지",
- "countryNameSK": "슬로바키아",
- "countryNameTC": "터크스 케이커스 제도",
- "countryNameNP": "네팔",
- "countryNameBF": "부르키나 파소",
- "countryNameYE": "예멘",
- "countryNameBA": "보스니아 헤르체고비나",
- "countryNameGP": "과들루프",
- "countryNameMS": "몬트세라트",
- "countryNameCL": "칠레",
- "countryNameIQ": "이라크",
- "countryNameSJ": "스발바르제도-얀마웬섬",
- "countryNameAX": "포클랜드 제도",
- "countryNameKE": "케냐",
- "countryNameGU": "괌",
- "countryNameBM": "버뮤다",
- "countryNameFO": "페로 제도",
- "countryNameBL": "생바르텔레미 섬",
- "countryNameLB": "레바논",
- "countryNameJM": "자메이카",
- "countryNameAF": "아프가니스탄",
- "countryNameES": "스페인",
- "countryNameMC": "모나코",
- "countryNameSG": "싱가포르",
- "countryNameAL": "알바니아",
- "countryNameSN": "세네갈",
- "countryNameSZ": "에스와티니",
- "countryNameBZ": "벨리즈",
- "countryNameCI": "코트디부아르",
- "countryNameTW": "대만",
- "countryNameUY": "우루과이",
- "countryNameCK": "쿡 제도",
- "countryNameTH": "태국",
- "countryNameHM": "허드 섬 및 맥도널드 제도",
- "countryNameGD": "그레나다",
- "countryNameUS": "미국",
- "countryNameAT": "오스트리아",
- "countryNameKR": "한국",
- "countryNamePK": "파키스탄",
- "countryNameDK": "덴마크",
- "countryNameSV": "엘살바도르",
- "countryNamePW": "팔라우",
- "countryNameET": "에티오피아",
- "countryNameMG": "마다가스카르",
- "countryNameCR": "코스타리카",
- "countryNameLU": "룩셈부르크",
- "countryNameQA": "카타르",
- "countryNameBT": "부탄",
- "countryNameSB": "솔로몬 제도",
- "countryNameAE": "아랍에미리트",
- "countryNameAD": "안도라",
- "countryNameCV": "카보베르데",
- "countryNameAG": "앤티가 바부다",
- "countryNameMU": "모리셔스",
- "countryNameHU": "헝가리",
- "countryNameSX": "상마르탱 섬",
- "countryNameCH": "스위스",
- "countryNamePN": "핏케언 제도",
- "countryNameGL": "그린란드",
- "countryNamePH": "필리핀",
- "countryNameMT": "몰타",
- "countryNameKN": "세인트 크리스토퍼 네비스",
- "countryNameLK": "스리랑카",
- "countryNameKI": "키리바시",
- "countryNameBJ": "베냉",
- "countryNameLV": "라트비아",
- "countryNamePY": "파라과이"
- }
- }
+ "SyncNotification": {
+ "failure": "{0}을(를) 동기화할 수 없습니다.",
+ "failureDescription": "오류가 발생하여 요청한 동기화를 완료할 수 없습니다. 다시 시도해 주세요.",
+ "pending": "{0} 동기화 진행 중",
+ "pendingDescription": "가장 최근의 데이터를 검색하고 있습니다. 이 프로세스는 몇 분 정도 걸릴 수 있습니다.",
+ "success": "{0} 동기화 완료",
+ "successDescription": "{0}에 WUfB 서비스와 동기화 완료"
+ },
+ "SyncSpinner": {
+ "text": "동기화가 진행 중입니다. 몇 분 정도 걸릴 수 있습니다. 알림을 찾거나 몇 분 후에 다시 확인하세요."
+ },
+ "TabName": {
+ "basics": "기본",
+ "driverUpdateSettings": "설정",
+ "otherDrivers": "기타 드라이버",
+ "properties": "속성",
+ "recommendedDrivers": "권장 드라이버"
+ },
+ "driverAddFilter": "필터 추가",
+ "driverApplicableDevices": "적용 가능한 장치",
+ "driverApprovalStatus": "상태",
+ "driverBulkActions": "대량 작업",
+ "driverClass": "드라이버 클래스",
+ "driverCount": "레코드 {0}~{1}/{2}개 표시 중",
+ "driverFilterNoneSelected": "선택된 항목이 없음",
+ "driverManufacturer": "제조업체",
+ "driverName": "드라이버 이름",
+ "driverNameLower": "Windows 드라이버 업데이트 배포",
+ "driverNameUpper": "Windows 드라이버 업데이트 배포",
+ "driverRefresh": "새로 고침",
+ "driverReleaseDate": "릴리스 날짜",
+ "driverSearch": "검색",
+ "driverSearchKeyword": "검색 키워드 입력",
+ "driverVersion": "버전",
+ "firstDeploymentDate": "첫 번째 배포",
+ "infoBoxText": "정책을 할당하고 만든 후 인벤토리를 채우는 데 최대 24시간이 걸릴 수 있습니다.",
+ "textBlockText": "정책 승인 및 배포 설정을 선택합니다. 업데이트를 자동으로 또는 수동으로 승인하고 배포하는 정책을 설정하도록 선택합니다. 정책을 만든 후에는 승인 방법을 변경할 수 없지만 할당된 디바이스에 대한 인벤토리가 빌드되면 개별 드라이버 승인 및 배포 세부 정보를 변경할 수 있습니다."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge 구성 설정",
+ "edgeWindowsDataProtectionSettings": "Edge(Windows) 데이터 보호 설정 - 미리 보기",
+ "edgeWindowsSettings": "Edge(Windows) 구성 설정 - 미리 보기",
+ "generalAppConfig": "일반 앱 구성",
+ "generalSettings": "일반 구성 설정",
+ "outlookSMIMEConfig": "Outlook S/MIME 설정",
+ "outlookSettings": "Outlook 구성 설정",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-nl.json b/Documentation/Strings-nl.json
index 83e120d..099a97b 100644
--- a/Documentation/Strings-nl.json
+++ b/Documentation/Strings-nl.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Configuratie voor gegevensbeveiliging"
- },
- "OrganizeMailByThread": {
- "title": "E-mailberichten rangschikken op thread",
- "tooltip": "Standaard worden e-mailconversaties in Outlook gebundeld in een weergave met gespreksthreads. Als deze instelling is uitgeschakeld, wordt elk e-mailbericht in Outlook afzonderlijk weergegeven en worden berichten niet op thread gegroepeerd."
- },
- "Sync": {
- "header": "Contactvelden synchroniseren naar de configuratie van de app voor native contactpersonen"
- },
- "allowBiometricsAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
- "allowBiometricsTitle": "Biometrie vereisen voor toegang tot de app",
- "allowBiometricsTooltip": "Functies voor biometrie, bijvoorbeeld Touch ID of Face ID, kunnen worden vereist voor gebruikers om toegang te krijgen tot de app op hun apparaat. Indien nodig wordt biometrie gebruikt naast de verificatiemethode die is geselecteerd in dit profiel. Deze instelling moet niet worden ingeschakeld wanneer beleidsregels voor Intune-app-beveiliging zijn geïmplementeerd om het beleid voor app-beveiliging toegangsvereisten omvat waaraan moet worden voldaan voordat toegang wordt verkregen tot beheerde gegevens. Als u beide inschakelt, leidt dit tot meerdere meldingen voor toegang tot Outlook Mobile. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
- "allowCalendarNotificationsTitle": "Agendameldingen",
- "allowCalendarNotificationsTooltip": "Toestaan dat agendameldingen volledige details weergeven als de instelling Meldingen voor organisatiegegevens van het beleid voor app-beveiliging is ingesteld op Organisatiegegevens blokkeren.",
- "allowDefaultAppSignatureTitle": "Standaardhandtekening voor app",
- "allowDefaultAppSignatureTooltip": "In de standaardhandtekening voor de app wordt aangegeven of de optie Outlook voor iOS downloaden als standaardhandtekening voor de app wordt gebruikt tijdens het opstellen van berichten. Als de instelling de waarde Uit heeft, wordt de standaardhandtekening niet gebruikt. Gebruikers kunnen echter wel hun eigen handtekening toevoegen. Wanneer deze instelling de waarde Niet geconfigureerd heeft, wordt de standaardinstelling voor de app ingesteld op Aan.",
- "allowExternalRecipientsMailTipTitle": "De MailTip Externe ontvangers",
- "allowExternalRecipientsMailTipTooltip": "De MailTip Externe ontvangers wordt weergegeven als de afzender een externe ontvanger of een distributiegroep met externe ontvangers toevoegt. Deze MailTip informeert de afzender als een bericht dat de afzender heeft opgesteld, wordt verzonden naar ontvangers buiten de organisatie. De afzender kan dan de juiste beslissingen nemen over taalgebruik, toon en inhoud. Deze MailTip is alleen beschikbaar voor on-premises en Exchange Online-accounts die gebruikmaken van hybride moderne verificatie. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Aan gebruikt.",
- "allowFocusedInboxTitle": "Postvak IN met prioriteit",
- "allowFocusedInboxTooltip": "Met Postvak IN met prioriteit wordt het Postvak IN gescheiden in twee tabbladen: Met prioriteit en Overige. Uw belangrijkste e-mails bevinden zich op het tabblad Met prioriteit. De rest staat binnen handbereik, maar buiten direct zicht, op het tabblad Overige. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Aan gebruikt.",
- "allowMailNotificationsAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
- "allowMailNotificationsTitle": "E-mailmeldingen",
- "allowMailNotificationsTooltip": "Met deze waarde wordt aangegeven of Outlook mailmeldingen toestaat. Als de waarde wordt ingesteld op Nee, wordt de functie voor mailmeldingen uitgeschakeld.",
- "allowOrgDataOnWearablesTitle": "Organisatiegegevens op draagbare apparaten",
- "allowOrgDataOnWearablesTooltip": "Met deze waarde wordt aangegeven of Outlook-gegevens kunnen worden gesynchroniseerd naar een draagbaar apparaat. Als de instelling wordt ingesteld op Nee, wordt de synchronisatie met draagbare apparaten uitgeschakeld.",
- "allowSaveContactsAllowUserChangeTooltip": "Opgeven of de gebruiker de instelling voor synchronisatie van contactpersonen mag wijzigen.",
- "allowSaveContactsTitle": "Contactpersonen opslaan",
- "allowSaveContactsTooltip": "Door het opslaan van contactpersonen naar het systeemeigen adresboek van het mobiele apparaat kunnen nieuwe oproepen en sms-berichten worden gekoppeld met de bestaande Outlook-contactpersonen van de gebruiker. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
- "allowSmartReplyTitle": "Voorgestelde antwoorden",
- "allowSmartReplyTooltip": "Wanneer u een bericht opent, kan Outlook antwoorden voorstellen onder het bericht. Als u een voorgesteld antwoord selecteert, kunt u het antwoord bewerken voordat u het verzendt. Wanneer de instelling is de waarde Niet geconfigureerd heeft, wordt de standaard-app-instelling Aan gebruikt.",
- "allowUserChangeGeneralToolTip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
- "allowUserChangeTitle": "Toestaan dat de gebruiker de instelling kan wijzigen",
- "blockExternalImagesAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
- "blockExternalImagesTitle": "Externe afbeeldingen blokkeren",
- "blockExternalImagesTooltip": "Als de optie Externe afbeeldingen blokkeren is ingeschakeld, voorkomt de app het downloaden van afbeeldingen die op internet worden gehost en in de berichttekst zijn ingesloten. Als de optie niet is geconfigureerd, wordt de standaard-app-instelling Uit gebruikt.",
- "disableAddinsTitle": "Invoegtoepassingen toestaan",
- "disableAddinsTooltip": "Een App-beveiligingsbeleid stelt gebruikers standaard in staat om invoegtoepassingen van derden te gebruiken, maar kan worden gebruikt om invoegtoepassingen te blokkeren met de instelling 'Door beleid beheerde app-gegevens synchroniseren met systeemeigen apps of invoegtoepassingen\". Als u deze instelling instelt op 'Uit', worden invoegtoepassingen geblokkeerd wanneer de instelling App-beveiligingsbeleid is ingesteld op Toegestaan.",
- "discoverFeedTitle": "Feed detecteren",
- "discoverFeedTooltip": "Feeds detecteren van uw meest gebruikte Office-bestanden. Deze feed is standaard ingeschakeld wanneer Delve is ingeschakeld voor de gebruiker. Wanneer de instelling niet is geconfigureerd, is de app standaard ingesteld op Aan.",
- "enableSMIMETitle": "S/MIME inschakelen",
- "enableSMIMETooltip": "Opgeven of S/MIME-besturingselementen zijn ingeschakeld bij het opstellen van een e-mailbericht.",
- "encryptAllEmails": "Alle e-mailberichten versleutelen",
- "encryptAllEmailsAllowUserChangeTooltip": "Geef aan of de gebruiker de instelling Alle e-mailberichten versleutelen mag wijzigen.",
- "encryptAllEmailsTooltip": "Opgeven of alle e-mailberichten moeten worden versleuteld. Tijdens de versleuteling worden gegevens met een coderingstekst geconverteerd zodat alleen de beoogde ontvanger het e-mailbericht kan lezen.",
- "ldapUrl": "LDAP-URL",
- "ldapUrlTooltip": "Dit is de LDAP-hostnaam waar clients openbare versleutelingssleutels kunnen downloaden voor e-mailontvangers. E-mailberichten worden versleuteld als er een sleutel beschikbaar is. Ondersteunde indelingen: \r\n
\r\n
ldap.voorbeeld.com
\r\n
ldap.voorbeeld.com:123
\r\n
ldap://ldap.voorbeeld.com
\r\n
ldap://ldap.voorbeeld.com:123
\r\n
ldaps://ldap.voorbeeld.com
\r\n
ldaps://ldap.voorbeeld.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
- "nativeCalendarSyncMAMOnlyTitle": "Agendasynchronisatie toestaan",
- "nativeCalendarSyncMAMOnlyTooltip": "In een app-beveiligingsbeleid is het synchroniseren van de agenda met de eigen agenda-app standaard toegestaan. Het beleid kan echter worden gebruikt om de beschikbaarheid van de agenda te blokkeren. Deze instelling werkt onafhankelijk van de instelling voor het app-beveiligingsbeleid en maakt het voor organisaties mogelijk om te bepalen of agendasynchronisatie beschikbaar is voor het werk- of schoolaccount.",
- "nativeCalendarSyncTitle": "Agenda's synchroniseren",
- "nativeCalendarSyncTooltip": "Een app-beveiligingsbeleid staat standaard synchronisatie van agenda's met de systeemeigen Agenda-app toe, maar kan worden gebruikt om de beschikbaarheid van agendasynchronisatie te blokkeren met de instelling 'Gegevens van door beleid beheerde app synchroniseren met systeemeigen apps of invoegtoepassing'. Als u deze instelling instelt op 'Uit', wordt agendasynchronisatie geblokkeerd wanneer de instelling App-beveiligingsbeleid is ingesteld op Toegestaan.",
- "playMyEmailsTitle": "Mijn e-mailberichten afspelen",
- "playMyEmailsTooltip": "De functie Mijn e-mailberichten afspelen is standaard niet ingeschakeld in de app, maar wordt aangeboden aan in aanmerking komende gebruikers via een banner in het Postvak IN. Wanneer deze functie is ingesteld op Uit, wordt deze niet aangeboden aan in aanmerking komende gebruikers in de app. Gebruikers kunnen ervoor kiezen Mijn e-mailberichten afspelen handmatig in te schakelen vanuit de app, zelfs wanneer deze functie is ingesteld op Uit. Als deze optie is ingesteld als Niet geconfigureerd, is de standaardinstelling voor de app Aan en wordt de functie aangeboden aan in aanmerking komende gebruikers.",
- "signAllEmails": "Alle e-mailberichten ondertekenen",
- "signAllEmailsAllowUserChangeTooltip": "Geef aan of de gebruiker de instelling Alle e-mailberichten ondertekenen mag wijzigen.",
- "signAllEmailsTooltip": "Opgeven of alle e-mailberichten moeten worden ondertekend. Met een digitale handtekening wordt de echtheid van het e-mailbericht gecontroleerd om ervoor te zorgen dat de inhoud niet onrechtmatig kan worden gewijzigd tijdens de overdracht.",
- "syncAddressTitle": "Adres",
- "syncAddressTooltip": "Met deze waarde wordt bepaald of het adres van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncBirthdayTitle": "Verjaardag",
- "syncBirthdayTooltip": "Met deze waarde wordt bepaald of de verjaardag van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncCompanyTitle": "Bedrijf",
- "syncCompanyTooltip": "Met deze waarde wordt bepaald of de bedrijfsnaam van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncDepartmentTitle": "Afdeling",
- "syncDepartmentTooltip": "Met deze waarde wordt bepaald of de afdeling van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncEmailAddressTitle": "E-mailadres",
- "syncEmailAddressTooltip": "Met deze waarde wordt bepaald of het e-mailadres van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncInstantMessagingAddressTitle": "Adres voor chatberichten",
- "syncInstantMessagingAddressTooltip": "Met deze waarde wordt bepaald of het adres voor chatberichten van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncJobTitleTitle": "Functie",
- "syncJobTitleTooltip": "Met deze waarde wordt bepaald of de functie van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncNicknameTitle": "Bijnaam",
- "syncNicknameTooltip": "Met deze waarde wordt bepaald of de bijnaam van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncNotesTitle": "Notities",
- "syncNotesTooltip": "Met deze waarde wordt bepaald of de opmerkingen van de contactpersoon worden gesynchroniseerd naar native contactpersonen.",
- "syncPhoneHomeFaxNumberTitle": "Faxnummer thuis",
- "syncPhoneHomeFaxNumberTooltip": "Met deze waarde wordt bepaald of het privéfaxnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncPhoneHomeNumberTitle": "Telefoonnummer thuis",
- "syncPhoneHomeNumberTooltip": "Met deze waarde wordt bepaald of het privételefoonnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncPhoneMobileNumberTitle": "Mobiel telefoonnummer",
- "syncPhoneMobileNumberTooltip": "Met deze waarde wordt bepaald of het mobiele telefoonnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncPhoneOtherNumberTitle": "Ander telefoonnummer",
- "syncPhoneOtherNumberTooltip": "Met deze waarde wordt bepaald of het andere telefoonnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncPhonePagerNumberTitle": "Pagernummer",
- "syncPhonePagerNumberTooltip": "Met deze waarde wordt bepaald of het pagernummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncPhoneWorkFaxNumberTitle": "Faxnummer werk",
- "syncPhoneWorkFaxNumberTooltip": "Met deze waarde wordt bepaald of het zakelijke faxnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncPhoneWorkNumberTitle": "Telefoonnummer werk",
- "syncPhoneWorkNumberTooltip": "Met deze waarde wordt bepaald of het werktelefoonnummer wordt gesynchroniseerd naar native contactpersonen.",
- "syncPrefixTitle": "Naamvoorvoegsel",
- "syncPrefixTooltip": "Met deze waarde wordt bepaald of het naamvoorvoegsel van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "syncSuffixTitle": "Naamachtervoegsel",
- "syncSuffixTooltip": "Met deze waarde wordt bepaald of het naamachtervoegsel van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
- "textPredictionsTitle": "Tekstvoorspellingen",
- "textPredictionsTooltip": "Outlook kan woorden en zinsdelen voorstellen bij het opstellen van berichten. Wanneer Outlook een suggestie geeft, kunt u vegen om deze te accepteren. Wanneer deze functie niet is geconfigureerd, is de app-standaardinstelling Aan.",
- "themesEnabledTitle": "Thema's zijn ingeschakeld",
- "themesEnabledTooltip": "Opgeven of de gebruiker een aangepast visueel thema mag gebruiken."
- },
- "Languages": {
- "ar-aE": "Arabisch (V.A.E.)",
- "ar-bH": "Arabisch (Bahrein)",
- "ar-dZ": "Arabisch (Algerije)",
- "ar-eG": "Arabisch (Egypte)",
- "ar-iQ": "Arabisch (Irak)",
- "ar-jO": "Arabisch (Jordanië)",
- "ar-kW": "Arabisch (Koeweit)",
- "ar-lB": "Arabisch (Libanon)",
- "ar-lY": "Arabisch (Libië)",
- "ar-mA": "Arabisch (Marokko)",
- "ar-oM": "Arabisch (Oman)",
- "ar-qA": "Arabisch (Qatar)",
- "ar-sA": "Arabisch (Saoedi-Arabië)",
- "ar-sY": "Arabisch (Syrië)",
- "ar-tN": "Arabisch (Tunesië)",
- "ar-yE": "Arabisch (Jemen)",
- "az-cyrl": "Azerbeidzjaans (Cyrillisch, Azerbeidzjan)",
- "az-latn": "Azerbeidzjaans (Latijns, Azerbeidzjan)",
- "bn-bD": "Bengaals (Bangladesh)",
- "bn-iN": "Bangla (India)",
- "bs-cyrl": "Bosnisch (Cyrillisch)",
- "bs-latn": "Bosnisch (Latijns)",
- "zh-cN": "Chinees (Volksrepubliek China)",
- "zh-hK": "Chinees (Hongkong SAR)",
- "zh-mO": "Chinees (Macao SAR)",
- "zh-sG": "Chinees (Singapore)",
- "zh-tW": "Chinees (Taiwan)",
- "hr-bA": "Kroatisch (Latijn)",
- "hr-hR": "Kroatisch (Kroatië)",
- "nl-bE": "Nederlands (België)",
- "nl-nL": "Nederlands (Nederland)",
- "en-aU": "Engels (Australië)",
- "en-bZ": "Engels (Belize)",
- "en-cA": "Engels (Canada)",
- "en-cabn": "Engels (Caribisch Gebied)",
- "en-iE": "Engels (Ierland)",
- "en-iN": "Engels (India)",
- "en-jM": "Engels (Jamaica)",
- "en-mY": "Engels (Maleisië)",
- "en-nZ": "Engels (Nieuw-Zeeland)",
- "en-pH": "Engels (Republiek der Filipijnen)",
- "en-sG": "Engels (Singapore)",
- "en-tT": "Engels (Trinidad en Tobago)",
- "en-uK": "Engels (Verenigd Koninkrijk)",
- "en-uS": "Engels (Verenigde Staten)",
- "en-zA": "Engels (Zuid-Afrika)",
- "en-zW": "Engels (Zimbabwe)",
- "fr-bE": "Frans (België)",
- "fr-cA": "Frans (Canada)",
- "fr-cH": "Frans (Zwitserland)",
- "fr-fR": "Frans (Frankrijk)",
- "fr-lU": "Frans (Luxemburg)",
- "fr-mC": "Frans (Monaco)",
- "de-aT": "Duits (Oostenrijk)",
- "de-cH": "Duits (Zwitserland)",
- "de-dE": "Duits (Duitsland)",
- "de-lI": "Duits (Liechtenstein)",
- "de-lU": "Duits (Luxemburg)",
- "iu-cans": "Inuktitut (syllabische tekens, Canada)",
- "iu-latn": "Inuktitut (Latijns, Canada)",
- "it-cH": "Italiaans (Zwitserland)",
- "it-iT": "Italiaans (Italië)",
- "ms-bN": "Maleis (Brunei Darussalam)",
- "ms-mY": "Maleis (Maleisië)",
- "mn-cN": "Mongools (Traditioneel Mongools, Volksrepubliek China)",
- "mn-mN": "Mongools (Cyrillisch, Mongolië)",
- "no-nB": "Noors, Bokmål (Noorwegen)",
- "no-nn": "Noors, Nynorsk (Noorwegen)",
- "pt-bR": "Portugees (Brazilië)",
- "pt-pT": "Portugees (Portugal)",
- "quz-bO": "Quechua (Bolivia)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Peru)",
- "smj-nO": "Sami, Lule (Noorwegen)",
- "smj-sE": "Sami, Lule (Zweden)",
- "se-fI": "Sami, noordelijk (Finland)",
- "se-nO": "Sami, noordelijk (Noorwegen)",
- "se-sE": "Sami, noordelijk (Zweden)",
- "sma-nO": "Sami, zuidelijk (Noorwegen)",
- "sma-sE": "Sami, zuidelijk (Zweden)",
- "smn": "Sami, Inari (Finland)",
- "sms": "Sami, Skolt (Finland)",
- "sr-Cyrl-bA": "Servisch (Cyrillisch)",
- "sr-Cyrl-rS": "Servisch (Cyrillisch, Servië en Montenegro (voormalig))",
- "sr-Latn-bA": "Servisch (Latijns)",
- "sr-Latn-rS": "Servisch (Latijns, Servië)",
- "dsb": "Neder-Sorbisch (Duitsland)",
- "hsb": "Opper-Sorbisch (Duitsland)",
- "es-es-tradnl": "Spaans (Spanje, traditioneel)",
- "es-aR": "Spaans (Argentinië)",
- "es-bO": "Spaans (Bolivia)",
- "es-cL": "Spaans (Chili)",
- "es-cO": "Spaans (Colombia)",
- "es-cR": "Spaans (Costa Rica)",
- "es-dO": "Spaans (Dominicaanse Republiek)",
- "es-eC": "Spaans (Ecuador)",
- "es-eS": "Spaans (Spanje)",
- "es-gT": "Spaans (Guatemala)",
- "es-hN": "Spaans (Honduras)",
- "es-mX": "Spaans (Mexico)",
- "es-nI": "Spaans (Nicaragua)",
- "es-pA": "Spaans (Panama)",
- "es-pE": "Spaans (Peru)",
- "es-pR": "Spaans (Puerto Rico)",
- "es-pY": "Spaans (Paraguay)",
- "es-sV": "Spaans (El Salvador)",
- "es-uS": "Spaans (Verenigde Staten)",
- "es-uY": "Spaans (Uruguay)",
- "es-vE": "Spaans [Venezuele]",
- "sv-fI": "Zweeds (Finland)",
- "uz-cyrl": "Oezbeeks (Cyrillisch, Oezbekistan)",
- "uz-latn": "Oezbeeks (Latijns, Oezbekistan)",
- "af": "Afrikaans (Zuid-Afrika)",
- "sq": "Albanees (Albanië)",
- "am": "Amhaars (Ethiopië)",
- "hy": "Armeens (Armenië)",
- "as": "Assamees (India)",
- "ba": "Bashkir (Rusland)",
- "eu": "Baskisch (Baskisch)",
- "be": "Belarussisch (Belarus)",
- "br": "Bretons (Frankrijk)",
- "bg": "Bulgaars (Bulgarije)",
- "ca": "Catalaans (Catalaans)",
- "co": "Corsicaans (Frankrijk)",
- "cs": "Tsjechisch (Tsjechische Republiek)",
- "da": "Deens (Denemarken)",
- "dv": "Divehi (Maldiven)",
- "et": "Estisch (Estland)",
- "fo": "Faeröers (Faröer)",
- "fil": "Filipijns (Filipijnen)",
- "fi": "Fins (Finland)",
- "gl": "Galicisch (Gallicië)",
- "ka": "Georgisch (Georgië)",
- "el": "Grieks (Griekenland)",
- "gu": "Gujarati (India)",
- "ha": "Hausa (Latijns, Nigeria)",
- "he": "Hebreeuws (Israël)",
- "hi": "Hindi (India)",
- "hu": "Hongaars (Hongarije)",
- "is": "IJslands (IJsland)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonesisch (Indonesië)",
- "ga": "Iers (Ierland)",
- "xh": "isiXhosa (Zuid-Afrika)",
- "zu": "isiZulu (Zuid-Afrika)",
- "ja": "Japans (Japan)",
- "kn": "Kannada (India)",
- "kk": "Kazachs (Kazachstan)",
- "km": "Khmer (Cambodja)",
- "rw": "Kinyarwanda (Rwanda)",
- "sw": "Kiswahili (Kenia)",
- "kok": "Konkani (India)",
- "ko": "Koreaans (Korea)",
- "ky": "Kirgizisch (Kirgizië)",
- "lo": "Lao (Democratische Volksrepubliek Laos)",
- "lv": "Lets (Letland)",
- "lt": "Litouws (Litouwen)",
- "lb": "Luxemburgs (Luxemburg)",
- "mk": "Macedonisch (Noord-Macedonië)",
- "ml": "Malayalam (India)",
- "mt": "Maltees (Malta)",
- "mi": "Maori (Nieuw-Zeeland)",
- "mr": "Marathi (India)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepalees (Nepal)",
- "oc": "Occitaans (Frankrijk)",
- "or": "Odia (India)",
- "ps": "Pashto (Afghanistan)",
- "fa": "Perzisch",
- "pl": "Pools (Polen)",
- "pa": "Punjabi (India)",
- "ro": "Roemeens (Roemenië)",
- "rm": "Romaans (Zwitserland)",
- "ru": "Russisch (Rusland)",
- "sa": "Sanskriet (India)",
- "st": "Sesotho sa Leboa (Zuid-Afrika)",
- "tn": "Setswana (Zuid-Afrika)",
- "si": "Sinhala (Sri Lanka)",
- "sk": "Slowaaks (Slowakije)",
- "sl": "Sloveens (Slovenië)",
- "sv": "Zweeds (Zweden)",
- "syr": "Syrisch (Syrië)",
- "tg": "Tadzjieks (Cyrillisch, Tadzjikistan)",
- "ta": "Tamil (India)",
- "tt": "Tataars (Rusland)",
- "te": "Telugu (India)",
- "th": "Thai (Thailand)",
- "bo": "Tibetaans (Volksrepubliek China)",
- "tr": "Turks (Turkije)",
- "tk": "Turkmeens (Turkmenistan)",
- "uk": "Oekraïens (Oekraïne)",
- "ur": "Oerdoe (Islamitische Republiek Pakistan)",
- "vi": "Vietnamees (Vietnam)",
- "cy": "Welsh (Verenigd Koninkrijk)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (Volksrepubliek China)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender for Endpoint",
- "androidDeviceOwnerApplications": "Toepassingen",
- "androidDeviceOwnerPolicyMessages": "Aangepaste ondersteuningsinformatie",
- "androidForWorkPassword": "Apparaatwachtwoord",
- "appManagement": "Apps blokkeren of toestaan",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Beperkte apps",
- "applicationVisibility": "Apps weergeven of verbergen",
- "applications": "App Store",
- "applicationsAndGames": "App Store, documentweergave, gaming",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Apps en ervaring",
- "associatedDomains": "Gekoppelde domeinen",
- "autonomousSingleAppMode": "Autonome modus voor enkele app",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Windows-versleuteling",
- "bootOptions": "Opties voor opstarten",
- "browser": "Browser",
- "builtinApps": "Geïntegreerde apps",
- "cameras": "Camera's",
- "cellular": "Mobiel",
- "cloudAndStorage": "Cloud en opslag",
- "cloudPrint": "Cloudprinter",
- "complianceEmailProfile": "E-mail",
- "connectedDevices": "Aangesloten apparaten",
- "connectivity": "Mobiel en connectiviteit",
- "contentCaching": "Cacheopslag van inhoud",
- "controlPanelAndSettings": "Configuratiescherm en Instellingen",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Aangepaste naleving",
- "customConfiguration": "Aangepast configuratieprofiel",
- "customOMASettings": "Aangepaste OMA-URI-instellingen",
- "customPreferences": "Voorkeursbestand",
- "dFCISecuritySettings": "Beveiligingsinstellingen",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows Firewall",
- "defenderLocalSecurityOptions": "Beveiligingsopties lokaal apparaat",
- "defenderSecurityCenter": "Microsoft Defender-beveiligingscentrum",
- "deliveryOptimization": "Delivery Optimization",
- "derivedCredentialAuthenticationConfiguration": "Afgeleide referentie",
- "deviceExperience": "Apparaat-ervaring",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Microsoft Defender-toepassingsbeheer",
- "deviceHealth": "Apparaatstatus",
- "devicePassword": "Apparaatwachtwoord",
- "deviceProperties": "Apparaateigenschappen",
- "deviceRestrictions": "Algemeen",
- "deviceSecurity": "Systeembeveiliging",
- "display": "Weergeven",
- "domainJoin": "Domeindeelname",
- "domains": "Domeinen",
- "edgeBrowser": "Microsoft Edge Legacy (versie 45 en eerder)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge-kioskmodus",
- "editionUpgrade": "Editie-upgrade",
- "education": "Educatief",
- "educationDeviceCerts": "Apparaatcertificaten",
- "educationStudentCerts": "Studentcertificaten",
- "educationTakeATest": "Een test uitvoeren",
- "educationTeacherCerts": "Docentcertificaten",
- "emailProfile": "E-mail",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "App-extensie voor eenmalige aanmelding",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Games",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Statuscontrole",
- "homeScreenLayout": "Indeling startscherm",
- "iOSWallpaper": "Achtergrond",
- "importedPFX": "Geïmporteerd PKCS-certificaat",
- "iosDefenderAtp": "Microsoft Defender for Endpoint",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Kernelextensies",
- "keyboardAndDictionary": "Toetsenbord en woordenlijst",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Toegewezen apparaten",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Kiosk Web Browser",
- "lockScreenMessage": "Bericht voor vergrendelingsscherm",
- "lockedScreenExperience": "Ervaring vergrendeld scherm",
- "logging": "Rapportage en telemetrie",
- "loginItems": "Aanmeldingsitems",
- "loginWindow": "Aanmeldingsvenster",
- "macDefenderAtp": "Microsoft Defender for Endpoint",
- "maintenance": "Onderhoud",
- "malware": "Malware",
- "messaging": "Berichten",
- "microphonesAndSpeakers": "Microfoons en luidsprekers",
- "networkBoundary": "De grens van het netwerk",
- "networkProxy": "Netwerkproxy",
- "notifications": "App-meldingen",
- "pKCS": "PKCS-certificaat",
- "password": "Wachtwoord",
- "personalProfile": "Persoonlijk profiel",
- "personalization": "Persoonlijke instellingen",
- "policyOverride": "Groepsbeleid overschrijven",
- "ports": "Poorten",
- "powerSettings": "Energie-instellingen",
- "printer": "Printer",
- "privacy": "Privacy",
- "privacyPerApp": "Privacyuitzonderingen per app",
- "privacyPreferences": "Privacyvoorkeuren",
- "projection": "Projectie",
- "radios": "Radio's",
- "sCCMCompliance": "Configuration Manager-naleving",
- "sCEP": "SCEP-certificaat",
- "sCEPProperties": "SCEP-certificaat",
- "sMode": "Overschakelen naar andere modus (alleen Windows Insider)",
- "safari": "Safari",
- "search": "Zoeken",
- "session": "Sessie",
- "sharedDevice": "Gedeelde iPad",
- "sharedPCAccountManager": "Gedeeld apparaat voor meerdere gebruikers",
- "singleSignOn": "Eenmalige aanmelding",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Instellingen",
- "start": "Begin",
- "systemExtensions": "Systeemextensies",
- "systemSecurity": "Systeembeveiliging",
- "trustedCert": "Vertrouwd certificaat",
- "uEFIAccess": "UEFI-toegang",
- "updates": "Updates",
- "userRights": "Gebruikersrechten",
- "usersAndAccounts": "Gebruikers en accounts",
- "vPN": "Basis-VPN",
- "vPNApps": "Automatische VPN",
- "vPNAppsAndTrafficRules": "Apps en verkeersregels",
- "vPNConditionalAccess": "Voorwaardelijke toegang",
- "vPNConnectivity": "Connectiviteit",
- "vPNDNSTriggers": "DNS-instellingen",
- "vPNIKEv2": "IKEv2-instellingen",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Split tunneling",
- "vPNTrustedNetwork": "Vertrouwde netwerkdetectie",
- "wakeSettings": "Instellingen voor activeren",
- "webContentFilter": "Webinhoudsfilter",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender for Endpoint",
- "windowsDefenderATP": "Microsoft Defender for Endpoint",
- "windowsHelloForBusiness": "Windows Hello voor Bedrijven",
- "windowsSpotlight": "Windows-spotlight",
- "wiredNetwork": "Bekabeld netwerk",
- "wireless": "Draadloos",
- "wirelessProjection": "Draadloze projectie",
- "workProfile": "Werkprofielinstellingen",
- "workProfilePassword": "Werkprofielwachtwoord",
- "xboxServices": "Xbox-services",
- "zebraMx": "MX-profiel (alleen Zebra)",
- "complianceActionsLabel": "Acties voor niet-naleving"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Beschrijving"
- },
- "FeatureDeploymentSettings": {
- "header": "Instellingen voor implementatie van functies"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Met deze functie kan geen downgrade voor een apparaat worden uitgevoerd.",
- "label": "De functie-update die moet worden geïmplementeerd"
- },
- "GradualRolloutEndDate": {
- "label": "Beschikbaarheid laatste groep"
- },
- "GradualRolloutInterval": {
- "label": "Dagen tussen groepen"
- },
- "GradualRolloutStartDate": {
- "label": "Beschikbaarheid eerste groep"
- },
- "Name": {
- "label": "Naam"
- },
- "OptionalUpdate": {
- "label": "Vereiste of optionele update"
- },
- "RolloutOptions": {
- "label": "Implementatieopties"
- },
- "RolloutSettings": {
- "header": "Wanneer wilt u de update beschikbaar maken in Windows Update?"
- },
- "ScopeSettings": {
- "header": "Bereiktags voor dit beleid configureren."
- },
- "StartDateOnlyStartDate": {
- "label": "Eerste beschikbare datum"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Uitgeschakeld",
- "enabled": "Ingeschakeld",
- "infoBalloonContent": "Bepaal of u de nieuwste Windows 10-onderdelenupdate wilt installeren op apparaten die niet in aanmerking komen voor Windows 11",
- "label": "Wanneer een apparaat niet in aanmerking komt voor het uitvoeren van Windows 11, installeert u de nieuwste Windows 10-onderdelenupdate",
- "notApplicable": "Niet van toepassing",
- "summaryLabel": "Installeer Windows 10 op apparaten die niet in aanmerking komen voor Windows 11"
- },
- "bladeTitle": "Implementaties van onderdelenupdate",
- "deploymentSettingsTitle": "Implementatie-instellingen",
- "loadError": "Kan niet laden.",
- "windows11EULA": "Door deze onderdelenupdate voor implementeren in te schakelen gaat u ermee akkoord dat bij het toepassen van dit besturingssysteem op een apparaat (1) de toepasselijke Windows-licentie is aangeschaft via de volumelicentie of (2) dat u gemachtigd bent om uw organisatie te binden en namens haar de relevante Licentievoorwaarden voor Microsoft-software accepteert die u hier {0} kunt vinden."
- },
- "Notifications": {
- "deploymentSaved": "{0} is opgeslagen.",
- "newFeatureUpdateDeploymentCreated": "Nieuwe implementatie voor onderdelenupdate gemaakt."
- },
- "TabName": {
- "deploymentSettings": "Implementatie-instellingen",
- "groupAssignmentSettings": "Toewijzingen",
- "scopeSettings": "Bereiktags"
- },
- "gradualRolloutLicenseWarning": "Voor deze mogelijkheid zijn specifieke licenties vereist.",
- "gradualRolloutLicenseWarningEdit": "Deze mogelijkheid kan worden gebruikt en geconfigureerd totdat het beleid wordt opgeslagen zonder dat deze mogelijkheid is geselecteerd.",
- "licenseLearnMoreText": "Meer informatie over vereisten en beleidsregels voor onderdelenupdates.",
- "optionalUpdateWarning": "Optioneel is alleen beschikbaar voor Windows 11-updates",
- "profileNameWarning": "De naam moet minder dan 64 tekens bevatten",
- "specificLicensingRequired": "Voor sommige geselecteerde mogelijkheden zijn specifieke licenties vereist."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Kleine letters toestaan in een pincode",
- "notAllow": "Geen kleine letters toestaan in een pincode",
- "requireAtLeastOne": "Minimaal één kleine letter vereisen in een pincode"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Speciale tekens toestaan in een pincode",
- "notAllow": "Geen speciale tekens toestaan in een pincode",
- "requireAtLeastOne": "Minimaal één speciaal teken vereisen in een pincode"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Hoofdletters toestaan in een pincode",
- "notAllow": "Geen hoofdletters toestaan in een pincode",
- "requireAtLeastOne": "Minimaal één hoofdletter vereisen in een pincode"
- }
+ "InstallContextType": {
+ "device": "Apparaat",
+ "deviceContext": "Apparaatcontext",
+ "user": "Gebruiker",
+ "userContext": "Gebruikerscontext"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "App-versie",
- "dependencyName": "Naam van afhankelijkheid",
- "lastModifiedTime": "Tijdstip laatst gewijzigd",
- "relationship": "Relatie",
- "replaced": "Vervangen",
- "searchPlaceholder": "Filteren op app-naam",
- "status": "Statusdetails",
- "statusDetails": "Status",
- "supersedenceName": "Vervangingsnaam"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Onderliggende afhankelijkheid",
- "indirectSupersedence": "Niet rechtstreeks gerelateerd",
- "supersedenceAncestors": "Vervangen",
- "supersedenceDescendants": "Vervangen"
- },
- "SupersededReplaced": {
- "no": "Nee",
- "yes": "Ja"
- },
- "Tabs": {
- "chart": "Diagram",
- "dependency": "Afhankelijkheid",
- "label": "Weergeven: ",
- "supersedence": "Vervanging",
- "table": "Tabel"
- },
- "dependencyGraphAriaLabel": "Diagram app-afhankelijkheid",
- "supersedenceGraphAriaLabel": "Appvervangingsgrafiek"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Selecteer een detectiescript",
- "scriptFileLabel": "Het detectiescript selecteren"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Als deze optie is ingeschakeld, moeten apparaten compatibel zijn volgens aangepaste regels gedefinieerd in een JSON-bestand op basis van aangepaste gegevens geretourneerd door een PowerShell-detectiescript.",
- "label": "Aangepaste naleving wordt momenteel aangeboden als preview-versie. Zodra deze algemeen beschikbaar wordt, kunt u deze tegen extra kosten toevoegen aan de licentieopties die Microsoft Intune bevatten."
- },
- "ScriptPicker": {
- "objectName": "Script",
- "placeholder": "Klik om te selecteren",
- "searchboxPlaceholder": "Zoeken op naam van script",
- "title": "Een detectiescript selecteren"
- },
- "SummaryGrid": {
- "ariaLabel": "Samenvatting van regels voor aangepaste naleving"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "Er is één blokkeringsactie vereist voor alle nalevingsbeleid.",
+ "graceperiod": "Schema (dagen na niet-naleving)",
+ "graceperiodInfo": "Opgeven na hoeveel dagen van niet-compatibiliteit deze actie moet worden geactiveerd voor het apparaat van de gebruiker",
+ "subtitle": "Actieparameters opgeven",
+ "title": "Actieparameters"
+ },
+ "List": {
+ "gracePeriodDay": "{0} dag na niet-naleving",
+ "gracePeriodDays": "{0} dagen na niet-naleving",
+ "gracePeriodHour": "{0} uur na niet-naleving",
+ "gracePeriodHours": "{0} uur na niet-naleving",
+ "gracePeriodMinute": "{0} minuut na niet-naleving",
+ "gracePeriodMinutes": "{0} minuten na niet-naleving",
+ "immediately": "Onmiddellijk",
+ "schedule": "Schema",
+ "scheduleInfoBalloon": "Dagen na niet-naleving",
+ "subtitle": "Een reeks acties op niet-compatibele apparaten opgeven",
+ "title": "Acties"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Overige",
+ "additionalRecipients": "Extra geadresseerden (via e-mail)",
+ "additionalRecipientsBladeTitle": "Aanvullende ontvangers selecteren",
+ "emailAddressPrompt": "E-mailadressen invoeren (gescheiden door komma's)",
+ "invalidEmail": "Ongeldig e-mailadres",
+ "messageTemplate": "Berichtsjabloon",
+ "noneSelected": "Niets geselecteerd",
+ "notSelected": "Niet geselecteerd",
+ "numSelected": "{0} geselecteerd",
+ "selected": "Geselecteerd"
},
- "UploadFile": {
- "jsonFileLabel": "Upload en valideer het JSON-bestand met uw aangepaste nalevingsinstellingen",
- "noFileSelectedError": "Selecteer een geldig JSON-bestand",
- "parseFileSelectedError": "Het JSON-bestand is ongeldig"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filter",
- "noFilters": "Geen"
- },
- "Platform": {
- "all": "Alles",
- "android": "Android-apparaatbeheerder",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Algemeen",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS en Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Onbekend",
- "unsupported": "Niet-ondersteund",
- "windows": "Windows",
- "windows10": "Windows 10 en later",
- "windows10CM": "Windows 10 en hoger (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 en later",
- "windows8And10": "Windows 8 en 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 en later",
- "windows10AndWindowsServer": "Windows 10, Windows 11 en Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 en hoger (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows-pc"
- },
+ "block": "Het apparaat als niet-compatibel markeren",
+ "lockDevice": "Apparaat vergrendelen (lokale actie)",
+ "lockDeviceWithPasscode": "Apparaat vergrendelen (lokale actie)",
+ "noAction": "Geen actie",
+ "noActionRow": "Geen acties. Selecteer Toevoegen om een actie toe te voegen",
+ "pushNotification": "Pushmelding verzenden naar eindgebruiker",
+ "remoteLock": "Het niet-compatibele apparaat extern vergrendelen",
+ "removeSourceAccessProfile": "Brontoegangsprofiel verwijderen",
+ "retire": "Apparaat toevoegen aan buitengebruikstellingslijst",
+ "wipe": "Wissen",
+ "emailNotification": "E-mail verzenden naar de eindgebruiker"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Beheerdersgroepen",
+ "RoleAssignmentAdminDesc": "Gebruikers in de beheerdersgroep zijn de beheerders die aan deze rol zijn toegewezen",
+ "rolesMenuTitle": "Eindpuntbeheerder-rollen",
+ "RoleAssignmentScopeDesc": "Beheerders aan wie deze rol is toegewezen, kunnen beleidsregels, toepassingen en externe taken beheren",
+ "RoleAssignmentScope": "Bereikgroepen"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "App-gegevens",
"nameForOfficeSuitApp": "Gegevens over de app-suite"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "In Android kunt u identificatie met een vingerafdruk in plaats van een pincode toestaan. Gebruikers worden om hun vingerafdruk gevraagd wanneer ze deze app openen met hun werkaccount.",
- "iOS": "U kunt op iOS/iPadOS-apparaten identificatie met een vingerafdruk in plaats van met een pincode toestaan. Gebruikers worden gevraagd om hun vingerafdruk wanneer ze hun werkaccount gebruiken om toegang tot deze app te krijgen.",
- "mac": "U kunt op Mac-apparaten identificatie met een vingerafdruk toestaan in plaats van met een pincode. Gebruikers wordt gevraagd om hun vingerafdruk wanneer ze hun werkaccount gebruiken om toegang tot deze app te krijgen."
- },
- "allowWidgetContentSync": "Kies Blokkeren om te voorkomen dat door beleid beheerde apps gegevens opslaan in app-widgets. Als u Toestaan kiest, kan de door beleid beheerde app gegevens opslaan in app-widgets, als deze functies worden ondersteund en zijn ingeschakeld in de door beleid beheerde app. \r\n\r\n \r\n\r\nApps kunnen extra configuratiemogelijkheden bieden met app-configuratiebeleid. Zie de documentatie van de app voor meer informatie.",
- "appSharingFromLevel1": "Selecteer een van de volgende opties om de apps op te geven waarvan deze app gegevens kan ontvangen:",
- "appSharingFromLevel2": "{0}: alleen toestaan dat gegevens in organisatiedocumenten of -accounts worden ontvangen die afkomstig zijn van andere door beleid beheerde apps",
- "appSharingFromLevel3": "{0}: toestaan dat gegevens uit alle apps worden ontvangen in organisatiedocumenten of -accounts",
- "appSharingFromLevel4": "{0}: niet toestaan dat gegevens uit alle apps worden ontvangen in organisatiedocumenten of -accounts",
- "appSharingFromLevel5": "{0}: gegevensoverdracht toestaan van elke app en alle inkomende gegevens zonder gebruikers-id verwerken als organisatiegegevens.",
- "appSharingToLevel1": "Selecteer een van de volgende opties om de apps op te geven waarnaar deze app gegevens kan verzenden:",
- "appSharingToLevel2": "{0}: alleen toestaan dat organisatiegegevens worden verzonden naar andere door beleid beheerde apps",
- "appSharingToLevel3": "{0}: toestaan dat organisatiegegevens naar alle apps worden verzonden",
- "appSharingToLevel4": "{0}: niet toestaan dat organisatiegegevens naar alle apps worden verzonden",
- "appSharingToLevel5": "{0}: alleen overdracht toestaan naar andere door beleid beheerde apps en bestandsoverdracht naar andere met MDM beheerde apps op ingeschreven apparaten",
- "appSharingToLevel6": "{0}: alleen overdracht toestaan naar andere door beleid beheerde apps en dialoogvensters voor openen in/delen van het besturingssysteem filteren om alleen door beleid beheerde apps weer te geven",
- "assignmentFilterEdit1": "Als u toewijzingsfilters toepast op dit beleid, wordt de eigenschap 'Apparaatbeheertype' toegepast naast de waarden die zijn opgegeven voor 'Doel op apps op alle apparaattypen' en 'Apparaattypen' op de pagina 'Apps'.",
- "assignmentFilterEdit2": "Meer informatie over het toewijzen van app-beveiligingsbeleid.",
- "conditionalEncryption1": "Selecteer {0} om app-versleuteling voor interne app-opslag uit te schakelen wanneer apparaatversleuteling op een geregistreerd apparaat wordt gedetecteerd.",
- "conditionalEncryption2": "Opmerking: Intune kan alleen apparaatregistratie detecteren met Intune MDM. Externe app-opslag is nog wel versleuteld om ervoor te zorgen dat gegevens niet toegankelijk zijn voor onbeheerde toepassingen.",
- "contactSyncMac": "Indien uitgeschakeld, kunnen apps geen contactpersonen opslaan in het systeemeigen adresboek.",
- "contactsSync": "Kies Block om te voorkomen dat door beleid beheerde apps gegevens opslaan in de systeemeigen apps van het apparaat (zoals Contactpersonen, Agenda en widgets) of om het gebruik van invoegtoepassingen in de door beleid beheerde apps te voorkomen. Als u Allow kiest, kan de door beleid beheerde app gegevens opslaan in de systeemeigen apps of invoegtoepassingen gebruiken, als deze functies worden ondersteund en ingeschakeld in de door beleid beheerde app.
Apps kunnen extra configuratiemogelijkheden bieden met app-configuratiebeleid. Zie de documentatie van de app voor meer informatie.",
- "deviceTypeTargetingCreate1": "Apparaattypetargeting is verplaatst naar de stap Toewijzingen bij het maken van beleid.",
- "deviceTypeTargetingEdit1": "Als u toewijzingsfilters toepast op dit beleid, wordt de eigenschap 'Apparaatbeheertype' toegepast naast de waarden die zijn opgegeven voor 'Doel op apps op alle apparaattypen' en 'Apparaattypen' op de pagina 'Apps'.",
- "deviceTypeTargetingEdit2": "Als u het apparaatbeheertypedoel wilt bewerken, stelt u 'Doel op apps op alle apparaattypen' = 'Ja' opnieuw in. Maak vervolgens een MAM-toewijzingsfilter met de gewenste waarden voor 'Apparaatbeheertype'.",
- "deviceTypeTargetingHasMoved": "Meer informatie over het toewijzen van app-beveiligingsbeleid",
- "encryptionAndroid1": "Voor apps die zijn gekoppeld met een Intune Mobile Application Management-beleid wordt versleuteling geleverd door Microsoft. Gegevens worden synchroon versleuteld tijdens I/O-bewerkingen in het bestand volgens de instellingen in het Mobile Application Management-beleid. Beheerde apps in Android gebruiken AES-128-versleuteling in de CBC-modus waarbij de versleutelingsbibliotheken van het platform worden gebruikt. De versleutelingsmethode is niet FIPS 140-2-compatibel. SHA-256-versleuteling wordt ondersteund als een expliciete instructie met de SigAlg-parameter en werkt alleen op apparaten met versie 4.2 en hoger. Inhoud in de apparaatopslag wordt altijd versleuteld.",
- "encryptionAndroid2": "Wanneer u versleuteling vereist in uw app-beleid, moeten eindgebruikers een pincode instellen en gebruiken wanneer ze hun apparaat gebruiken. Als er geen pincode is ingesteld voor apparaattoegang, worden de apps niet gestart en zien eindgebruikers het volgende bericht: Uw bedrijf heeft vereist dat u eerst een apparaatpincode moet inschakelen om deze toepassing te gebruiken.",
- "encryptionMac1": "Microsoft levert de versleuteling voor apps die zijn gekoppeld aan een Intune-beheerbeleid voor mobiele toepassingen. Gegevens worden synchroon versleuteld tijdens I/O-bewerkingen voor bestanden op basis van de instellingen in het beheerbeleid voor mobiele toepassingen. Beheerde apps in Mac gebruiken AES-128-versleuteling in de CBC-modus, waarbij de versleutelingsbibliotheken van het platform worden gebruikt. De versleutelingsmethode is niet FIPS 140-2-compatibel. SHA-256-versleuteling wordt ondersteund als expliciete instructie met de parameter SigAlg en werkt alleen op apparaten met versie 4.2 en hoger. De inhoud in de apparaatopslag wordt altijd versleuteld.",
- "faceId1": "Indien van toepassing kunt u het gebruik van een gezichts-id toestaan in plaats van een pincode. Gebruikers wordt gevraagd een gezichts-id op te geven wanneer ze toegang tot deze app willen hebben met hun werkaccount.",
- "faceId2": "Selecteer Ja om een gezichts-id toe te staan in plaats van een pincode voor toegang tot de app.",
- "managementLevelsAndroid1": "U gebruikt deze optie om op te geven of dit beleid van toepassing is op apparaten met Android-apparaatbeheerder, Android Enterprise-apparaten of onbeheerde apparaten.",
- "managementLevelsAndroid2": "{0}: Onbeheerde apparaten zijn apparaten waarop het Intune MDM-beheer niet is aangetroffen. Hierbij inbegrepen zijn MDM-leveranciers als derde partij.",
- "managementLevelsAndroid3": "{0}: Door Intune beheerde apparaten met de Android Device Administration API.",
- "managementLevelsAndroid4": "{0}: Door Intune beheerde apparaten met Android Enterprise-werkprofielen of volledig apparaatbeheer van Android Enterprise.",
- "managementLevelsIos1": "U gebruikt deze optie om op te geven of dit beleid van toepassing is op door MDM beheerde apparaten of onbeheerde apparaten.",
- "managementLevelsIos2": "{0}: Onbeheerde apparaten zijn apparaten waarop het Intune MDM-beheer niet is aangetroffen. Hierbij inbegrepen zijn MDM-leveranciers als derde partij.",
- "managementLevelsIos3": "{0}: Beheerde apparaten zijn apparaten die worden beheerd door Intune MDM.",
- "minAppVersion": "Het minimale app-versienummer definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
- "minAppVersionWarning": "Het aanbevolen minimale app-versienummer definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
- "minOsVersion": "Het minimale besturingssysteemversienummer definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
- "minOsVersionWarning": "Het aanbevolen minimale besturingssysteemversienummer definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
- "minPatchVersion": "Het oudste vereiste niveau van de Android-beveiligingspatch dat een gebruiker kan hebben om beveiligde toegang tot de app te krijgen.",
- "minPatchVersionWarning": "Het oudste aanbevolen niveau van de Android-beveiligingspatch dat een gebruiker kan hebben om beveiligde toegang tot de app te krijgen.",
- "minSdkVersion": "Het minimale versie van Intune Application Protection Policy SDK definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
- "requireAppPinDefault": "
Selecteer Ja om de pincode van de app uit te schakelen wanneer een apparaatvergrendeling wordt gedetecteerd op een ingeschreven apparaat.
",
- "targetAllApps1": "U gebruikt deze optie om uw beleid te richten op apps op apparaten met alle mogelijke beheerstatussen.",
- "targetAllApps2": "Tijdens de oplossing van beleidsconflicten wordt deze instelling vervangen als een gebruiker een doelbeleid voor een specifieke beheerstatus heeft.",
- "touchId2": "Selecteer {0} om voor toegang tot de app een vingerafdruk te vereisen in plaats van een pincode."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Geef op na hoeveel dagen de gebruiker de pincode opnieuw moet instellen.",
- "previousPinBlockCount": "Met deze instelling geeft u het aantal eerdere pincodes op dat door Intune wordt bewaard. Eventuele nieuwe pincodes moeten anders zijn dan de pincodes die in Intune worden bewaard."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Zodoende kunt u met Windows Search blijven zoeken in versleutelde gegevens.",
- "authoritativeIpRanges": "Schakel deze instelling in als u de Windows-functie voor het automatisch detecteren van IP-bereiken wilt negeren.",
- "authoritativeProxyServers": "Schakel deze instelling in als u de Windows-functie voor het automatisch detecteren van proxyservers wilt negeren.",
- "checkInput": "Controleer de geldigheid van de invoer",
- "dataRecoveryCert": "Een herstelcertificaat is een speciaal EFS-certificaat (Encrypting File System) dat u kunt gebruiken om versleutelde bestanden te herstellen als de versleutelingssleutel is zoekgeraakt of beschadigd. U moet het herstelcertificaat maken en hier opgeven. Klik hier voor meer informatie",
- "enterpriseCloudResources": "
Geef op dat cloudresources worden behandeld als bedrijfsresources en worden beschermd met het Windows Information Protection-beleid. U kunt meerdere resources opgeven door afzonderlijke items met het teken | te scheiden.
Als in uw bedrijf een proxy is geconfigureerd, kunt u opgeven via welke proxy het verkeer naar de opgegeven cloudresources wordt geleid.
URL[,Proxy]|URL[,Proxy]
Zonder proxy: contoso.sharepoint.com|contoso.visualstudio.com Met proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Geef de IPv4-bereiken van het bedrijfsnetwerk op. Deze worden gebruikt in combinatie met de domeinnamen van het bedrijfsnetwerk die u opgeeft als grens van het bedrijfsnetwerk.
Deze instelling is vereist om Windows Information Protection in te schakelen.
U kunt meerdere bereikwaarden opgeven door afzonderlijke items met een komma te scheiden.\\
Geef de IPv6-bereiken van het bedrijfsnetwerk op. Deze worden gebruikt in combinatie met de domeinnamen van het bedrijfsnetwerk die u opgeeft als grens van het bedrijfsnetwerk.
U kunt meerdere bereikwaarden opgeven door afzonderlijke items met een komma te scheiden.
Als in uw bedrijf een proxy is geconfigureerd, kunt u opgeven via welke proxy het verkeer naar de cloudresources wordt geleid die zijn opgegeven in de instellingen voor bedrijfscloudresources.
U kunt meerdere waarden opgeven door afzonderlijke items met een puntkomma te scheiden
Geef de DNS-namen van het bedrijfsnetwerk op. Deze worden gebruikt in combinatie met de IP-bereiken die u opgeeft als grens van het bedrijfsnetwerk. U kunt meerdere waarden opgeven door afzonderlijke items met een komma te scheiden.
Deze instelling is vereist om Windows Information Protection in te schakelen.
Bijvoorbeeld: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Geef de DNS-namen van het bedrijfsnetwerk op. Deze worden gebruikt in combinatie met de IP-bereiken die u opgeeft als grens van het bedrijfsnetwerk. U kunt meerdere waarden opgeven door afzonderlijke items met een '|' te scheiden.
Deze instelling is vereist om Windows Information Protection in te schakelen.
Bijvoorbeeld: corp.contoso.com,region.contoso.com
",
- "enterpriseProxyServers": "
Als uw bedrijfsnetwerk extern gerichte proxy's bevat, geeft u deze hier op. Wanneer u het adres van een proxyserver opgeeft, moet u ook opgeven via welke poort het verkeer is toegestaan en wordt beschermd met Windows Information Protection.
Opmerking: Deze lijst mag geen servers bevatten die voorkomen in de lijst met interne proxyservers van de onderneming. U kunt meerdere waarden opgeven door afzonderlijke items met een puntkomma te scheiden.
",
- "maxInactivityTime1": "Hiermee geeft u de maximale hoeveelheid tijd op (in minuten) die het apparaat niet-actief mag zijn voordat het apparaat wordt vergrendeld met een pincode of wachtwoord. Gebruikers kunnen elke bestaande time-outwaarde opgeven die lager is dan de maximale tijd die is opgegeven in de app Instellingen. De Lumia 950 en 950XL hebben een maximale time-outwaarde van vijf minuten, ongeacht de waard die wordt ingesteld door dit beleid.",
- "maxInactivityTime2": "0 (standaardinstelling): Er is geen time-out op gedefinieerd. De standaardinstelling 0 wordt geïnterpreteerd als 'Geen time-out gedefinieerd.'",
- "maxPasswordAttempts1": "Dit beleid vertoont verschillend gedrag op een mobiel apparaat en een desktop.",
- "maxPasswordAttempts2": "Wanneer op een mobiel apparaat de waarde wordt bereikt die is ingesteld door dit beleid, wordt het apparaat gewist.",
- "maxPasswordAttempts3": "Wanneer een gebruiker op een desktop de waarde bereikt die is ingesteld door dit beleid, wordt de desktop niet gewist. In plaats daarvan wordt de BitLocker-herstelmodus ingeschakeld voor de desktop, waardoor de gegevens niet meer toegankelijk zijn, maar nog wel kunnen worden hersteld. Als BitLocker niet is ingeschakeld, kan het beleid niet worden afgedwongen.",
- "maxPasswordAttempts4": "Voordat de gebruiker de limiet voor het aantal mislukte pogingen bereikt, wordt deze doorgestuurd naar het vergrendelingsscherm en gewaarschuwd dat bij nog meer mislukte pogingen de computer wordt vergrendeld. Wanneer de gebruiker de limiet bereikt, wordt het apparaat automatisch opnieuw opgestart en wordt de BitLocker-herstelpagina weergegeven. De gebruiker wordt gevraagd de BitLocker-herstelsleutel op deze pagina in te voeren.",
- "maxPasswordAttempts5": "0 (standaardinstelling): het apparaat wordt nooit gewist nadat er een onjuiste pincode of onjuist wachtwoord is ingevoerd.",
- "maxPasswordAttempts6": "De veiligste waarde is 0 als alle beleidswaarden = 0. Anders is de beleidswaarde Min de veiligste waarde.",
- "mdmDiscoveryUrl": "Hier kunt u de URL van het eindpunt voor de MDM-registratie opgeven dat voor de registratie bij MDM wordt gebruikt. Dit wordt standaard opgegeven voor Intune.",
- "minimumPinLength1": "Geheel getal waarmee het minimale aantal vereiste tekens voor de pincode wordt opgegeven. De standaardwaarde is 4. Het laagste getal dat u voor deze beleidsinstelling kunt configureren, is 4. Het hoogste getal dat u kunt configureren moet kleiner zijn dan het getal in de beleidsinstelling voor de maximale pincodelengte of het getal 127, afhankelijk van welke waarde lager is.",
- "minimumPinLength2": "Als u deze beleidsinstelling configureert, moet de lengte van de pincode groter zijn dan of gelijk zijn aan dit getal. Als u deze beleidsinstelling uitschakelt of niet configureert, moet de lengte van de pincode groter zijn dan of gelijk zijn aan 4.",
- "name": "De naam van deze netwerkgrens",
- "neutralResources": "
Als uw bedrijf omleidingseindpunten voor verificatie heeft, moet u deze hier opgeven. De locaties die u hier opgeeft, worden noch als persoonlijk, noch als zakelijk beschouwd, afhankelijk van de context van de nieuwe verbinding.
U kunt meerdere waarden opgeven door afzonderlijke items met een komma te scheiden.
Bijvoorbeeld: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Waarde waarmee Windows Hello voor Bedrijven wordt ingesteld als methode voor de aanmelding bij Windows.",
- "passportForWork2": "Standaard waarde is Waar. Als u dit beleid op Onwaar instelt, kan de gebruiker Windows Hello voor Bedrijven alleen inrichten op mobiele telefoons die zijn gekoppeld aan Microsoft Entra en waarvoor inrichting is vereist.",
- "pinExpiration": "Het hoogste getal dat u voor deze beleidsinstelling kunt configureren, is 730. Het laagste getal dat u voor deze beleidsinstelling kunt configureren, is 0. Als dit beleid wordt ingesteld op 0, verloopt de pincode van de gebruiker nooit.",
- "pinHistory1": "Het hoogste getal dat u voor deze beleidsinstelling kunt configureren is 50. Het laagste getal dat u voor deze beleidsinstelling kunt configureren is 0. Als dit beleid wordt ingesteld op 0, hoeven eerder gebruikte pincodes niet verplicht worden opgeslagen.",
- "pinHistory2": "De huidige pincode van de gebruiker in de set pincodes die is gekoppeld aan het gebruikersaccount. Als een pincode opnieuw wordt ingesteld, wordt de pincodegeschiedenis niet bewaard.",
- "protectUnderLock": "Beschermt de app-inhoud wanneer het apparaat zich in een vergrendelde status bevindt.",
- "protectionModeBlock": "
Blokkeren: er wordt voorkomen dat ondernemingsgegevens de app kunnen verlaten.
",
- "protectionModeOff": "
Uit: De gebruiker kan gegevens verplaatsen buiten de beveiligde apps. Er worden geen acties geregistreerd in het logboek.
",
- "protectionModeOverride": "
Onderdrukkingen toestaan: De gebruiker wordt om invoer gevraagd wanneer deze gegevens van een beveiligde naar een niet-beveiligde app probeert te verplaatsen. Als de gebruiker ervoor kiest deze prompt te negeren, wordt de actie geregistreerd in het logboek.
",
- "protectionModeSilent": "
Stil:De gebruiker kan gegevens verplaatsen buiten de beveiligde apps. Deze acties worden geregistreerd in het logboek.
",
- "required": "Vereist",
- "revokeOnMdmHandoff": "Toegevoegd aan Windows 10, versie 1703. Met dit beleid wordt bepaald of de WIP-sleutels worden ingetrokken als er voor een apparaat een upgrade wordt uitgevoerd van MAM naar MDM. Indien ingesteld op Uit, worden de sleutels niet ingetrokken en heeft de gebruikers na de upgrade nog toegang tot de beschermde bestanden. Dit wordt aanbevolen als de MDM-service is geconfigureerd met dezelfde WIP EnterpriseID als de MAM-service.",
- "revokeOnUnenroll": "Als de registratie van een apparaat voor dit beleid ongedaan wordt gemaakt, worden de versleutelingssleutels ingetrokken.",
- "rmsTemplateForEdp": "De TemplateID GUID die moet worden gebruikt voor RMS-versleuteling. De IT-beheerder kan met de Azure RMS-sjabloon configureren wie toegang tot het met RMS beveiligde bestand heeft en hoe lang.",
- "showWipIcon": "Door een overlay met een pictogram toe te voegen, kan de gebruiker zien of er sprake is van een bedrijfscontext.",
- "useRmsForWip": "Hiermee wordt aangegeven of Azure RMS-versleuteling is toegestaan voor WIP."
- },
- "requireAppPin": "
Selecteer Ja om de pincode van de app uit te schakelen wanneer een apparaatvergrendeling wordt gedetecteerd op een ingeschreven apparaat.
Opmerking: met Intune kan apparaatinschrijving niet worden gedetecteerd met een EMM-oplossing van derden in iOS/iPadOS.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "Na installatie van de app kan opnieuw opstarten van het apparaat worden afgedwongen",
- "basedOnReturnCode": "Bepaal bedrag op basis van retourcodes",
- "force": "Via Intune wordt opnieuw opstarten van het apparaat afgedwongen",
- "suppress": "Geen specifieke actie"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Installatietijd vereist (minuten)",
- "maxRunTimeInMinutesToolTip": "Het aantal minuten dat het systeem wacht totdat het installatieprogramma is voltooid. De standaardwaarde is 60 minuten."
- },
- "RunAsAccountOptions": {
- "system": "Systeem",
- "user": "Gebruiker"
- },
- "availableUninstall": "Beschikbare verwijdering toestaan",
- "availableUninstallTooltip": "Selecteer Ja om de optie voor het verwijderen van deze app op te geven voor gebruikers van de Bedrijfsportal. Selecteer Nee om te voorkomen dat gebruikers de app verwijderen uit de Bedrijfsportal.",
- "bladeTitle": "Programma",
- "deviceRestartBehavior": "Gedrag voor opnieuw opstarten van apparaat",
- "deviceRestartBehaviorTooltip": "Selecteer het gedrag voor het opnieuw opstarten van het apparaat na installatie van de app. Selecteer Bepaal gedrag op basis van retourcodes om het apparaat opnieuw op te starten op basis van de instellingen van de retourcodes. Selecteer 'Geen specifieke actie' om opnieuw opstarten van het apparaat te onderdrukken bij het installeren van apps op basis van MSI. Selecteer Na installatie van de app kan opnieuw opstarten van het apparaat worden afgedwongen als u wilt dat de app wordt geïnstalleerd zonder dat opnieuw opstarten wordt onderdrukt. Selecteer Via Intune wordt opnieuw opstarten van het apparaat afgedwongen om het apparaat altijd opnieuw op te starten na installatie van de app.",
- "header": "Geef de opdrachten op voor het installeren en verwijderen van deze app:",
- "installCommand": "Opdracht voor installeren",
- "installCommandMaxLengthErrorMessage": "De installatieopdracht mag niet langer zijn dan de maximaal toegestane lengte van 1024 tekens.",
- "installCommandTooltip": "De volledige opdrachtregel voor installatie die wordt gebruikt om deze app te installeren.",
- "runAs32Bit": "Opdrachten voor installeren en verwijderen uitvoeren in een 32 bitsproces op 64 bitsclients",
- "runAs32BitTooltip": "Selecteer Ja als u de app in een 32 bitsproces op 64 bitsclients wilt installeren en verwijderen. Selecteer Nee (standaard) als u de app in een 64 bitsproces op 64 bitsclients wilt installeren en verwijderen. 32 bitsclients gebruiken altijd een 32 bitsproces.",
- "runAsAccount": "Installatiegedrag",
- "runAsAccountTooltip": "Selecteer Systeem om deze app te installeren voor alle gebruikers, indien ondersteund. Selecteer Gebruiker om deze app te installeren voor de aangemelde gebruiker op het apparaat. Bij wijzigingen kunnen updates en verwijderingen voor apps met MSI met een dubbel doel pas worden voltooid als de waarde die tijdens de oorspronkelijke installatie op het apparaat is toegepast, is hersteld.",
- "selectorLabel": "Programma",
- "uninstallCommand": "Opdracht voor verwijderen",
- "uninstallCommandTooltip": "De volledige opdrachtregel voor verwijdering die wordt gebruikt om deze app te verwijderen."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Nieuwe maken",
- "createNewResourceAccountInfo": "
\r\nMaak een nieuw resourceaccount tijdens de registratie. Het resourceaccount wordt direct aan de tabel met resourceaccounts toegevoegd, maar wordt pas actief als het apparaat is ingeschreven en het Surface Hub-abonnement is gecontroleerd. Meer informatie over resourceaccounts
\r\n ",
- "createNewResourceTitle": "Nieuw resourceaccount maken",
- "deviceNameInvalid": "De apparaatnaam heeft een ongeldige indeling",
- "deviceNameRequired": "Een apparaatnaam is vereist",
- "editResourceAccountLabel": "Bewerken",
- "selectExistingCommandMenu": "Bestaande selecteren"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "Namen mogen maximaal 15 tekens bevatten en mogen letters (a-z, A-Z), cijfers (0-9) en afbreekstreepjes bevatten. Namen mogen niet alleen cijfers bevatten. Namen mogen geen spatie bevatten."
- },
- "Header": {
- "addressableUserName": "Beschrijvende naam van gebruiker",
- "azureADDevice": "Gekoppeld Microsoft Entra-apparaat",
- "batch": "Groepstag",
- "dateAssigned": "Datum van toewijzing",
- "deviceAccountPwd": "Wachtwoord van apparaataccount",
- "deviceAccountUpn": "Apparaataccount",
- "deviceDisplayName": "Apparaatnaam",
- "deviceFriendlyName": "Beschrijvende naam van het apparaat",
- "deviceName": "Apparaatnaam",
- "deviceUseType": "Type apparaatgebruik",
- "enrollmentState": "Inschrijvingsstatus",
- "intuneDevice": "Gekoppeld Intune-apparaat",
- "lastContacted": "Voor het laatst contact opgenomen",
- "make": "Fabrikant",
- "model": "Model",
- "profile": "Toegewezen profiel",
- "profileStatus": "Profielstatus",
- "purchaseOrderId": "Inkooporder",
- "resourceAccount": "Resourceaccount",
- "serialNumber": "Serienummer",
- "userPrincipalName": "Gebruiker"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Een beschrijvende naam is vereist",
- "pwdRequired": "Het wachtwoord is vereist.",
- "pwdValidFormat": "Kan het wachtwoord niet bijwerken. De opgegeven waarde voor het nieuwe wachtwoord voldoet niet aan de lengte- of complexiteitsvereisten van het domein.",
- "upnRequired": "Er is een apparaataccount vereist",
- "upnValidFormat": "Waarden kunnen letters (a-z, A-Z), cijfers (0-9) en afbreekstreepjes bevatten. Waarden mogen geen lege ruimte bevatten."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Vergadering en presentaties",
- "teamCollaboration": "Teamsamenwerking"
- },
- "Devices": {
- "featureDescription": "Met Windows Autopilot kunt u de out-of-box-experience (OOBE) voor uw apparaten aanpassen.",
- "importErrorStatus": "Enkele apparaten zijn niet geïmporteerd. Klik hier voor meer informatie.",
- "importPendingStatus": "Importeren wordt uitgevoerd. Verstreken tijd: {0} min. Dit proces kan tot {1} minuten duren."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Microsoft Entra hybride gekoppeld",
- "activeDirectoryADLabel": "Samenvoeging van hybride Microsoft Entra met Autopilot",
- "azureAD": "Samengevoegd met Microsoft Entra",
- "unknownType": "Onbekend type"
- },
- "Filter": {
- "enrollmentState": "Status",
- "profile": "Profielstatus"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "Beschrijvende naam van gebruiker mag niet leeg zijn."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Maak een naamgevingssjabloon om namen aan uw apparaten toe te voegen tijdens de registratie.",
- "label": "Sjabloon voor apparaatnamen toepassen"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "Voor Autopilot-implementatieprofielen die zijn samengevoegd met hybride Microsoft Entra, krijgen computers een naam op basis van instellingen die zijn opgegeven in de configuratie van de domeindeelname."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MyCompany-%RAND:4%",
- "label": "Een naam invoeren",
- "noDisallowedChars": "De naam mag alleen alfanumerieke tekens, afbreekstreepjes, %SERIAL% of %RAND:x% bevatten",
- "serialLength": "Mag niet meer dan 7 tekens met %SERIAL% bevatten",
- "validateLessThan15Chars": "De naam mag maximaal 15 tekens bevatten",
- "validateNoSpaces": "Computernamen mogen geen spaties bevatten",
- "validateNotAllNumbers": "De naam moet ook letters en/of afbreekstreepjes bevatten",
- "validateNotEmpty": "Naam kan niet leeg zijn",
- "validateOnlyOneMacro": "De naam mag alleen één v%SERIAL% of %RAND:x% bevatten"
+ "ScopeTypes": {
+ "allDevices": "Alle apparaten",
+ "allUsers": "Alle gebruikers",
+ "allUsersAndDevices": "Alle gebruikers en alle apparaten",
+ "selectedGroups": "Geselecteerde groepen"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Beschrijving",
+ "placeholder": "Een beschrijving invoeren..."
+ },
+ "NameTextBox": {
+ "label": "Naam",
+ "placeholder": "Een naam invoeren"
+ },
+ "PublisherTextBox": {
+ "label": "Uitgever",
+ "placeholder": "Voer een uitgever in"
+ },
+ "VersionTextBox": {
+ "label": "Versie"
+ },
+ "headerDescription": "Maak een nieuw aangepast scriptpakket op basis van detectie- en herstelscripts die u hebt geschreven."
},
- "ConfigureComputerNameTemplate": {
- "description": "Maak een unieke naam voor uw apparaten. Namen mogen maximaal 15 tekens bevatten en mogen letters (a-z, A-Z), cijfers (0-9) en afbreekstreepjes bevatten. Namen mogen niet alleen cijfers bevatten. Namen mogen geen spaties bevatten. Gebruik de macro %SERIAL% om een hardwarespecifiek serienummer toe te voegen. U kunt eventueel de macro %RAND:x% gebruiken om een willekeurige tekenreeks van getallen toe te voegen, waarbij x staat voor het aantal toe te voegen cijfers."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Inschakelen dat met het vijf maal indrukken van de Windows-toets OOBE zonder gebruikersverificatie wordt uitgevoerd om het apparaat in te schrijven en alle apps en instellingen voor de systeemcontext in te richten. Apps en instellingen voor de gebruikerscontext worden beschikbaar gemaakt wanneer de gebruiker zich aanmeldt.",
- "label": "Vooraf ingerichte implementatie toestaan"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "De Autopilot-stroom die is samengevoegd met hybride Microsoft Entra wordt voortgezet, zelfs als er tijdens OOBE geen verbinding met de domeincontroller tot stand wordt gebracht.",
- "label": "AD-connectiviteitscontrole overslaan"
- },
- "accountType": "Gebruikersaccounttype",
- "accountTypeInfo": "Geef op of gebruikers beheerders of standaardgebruikers zijn op het apparaat. Deze instelling geldt niet voor accounts van globale beheerders of bedrijfsbeheerders. Deze accounts kunnen geen standaardgebruikers zijn, omdat ze toegang hebben tot alle beheerfuncties in Microsoft Entra ID.",
- "configOOBEInfo": "
\r\nDe out-of-box-ervaring voor uw Autopilot-apparaten configureren\r\n
",
- "configureDevice": "Implementatiemodus",
- "configureDeviceHintForSurfaceHub2": "Autopilot ondersteunt alleen de zelfimplementatiemodus voor Surface Hub 2. In deze modus wordt de gebruiker niet gekoppeld aan het ingeschreven apparaat, zodat er geen gebruikersreferenties zijn vereist.",
- "configureDeviceHintForWindowsPC": "
\r\n De implementatiemodus bepaalt of een gebruiker referenties moet opgeven om het apparaat in te richten.\r\n
\r\n
\r\n
\r\n Op basis van gebruiker: apparaten zijn gekoppeld aan de gebruiker die het apparaat inschrijft en er zijn gebruikersreferenties vereist om het apparaat in te richten \r\n
\r\n
\r\n Zelf-implementerend (preview): apparaten zijn niet gekoppeld aan de gebruiker die het apparaat inschrijft en er zijn geen gebruikersreferenties vereist om het apparaat in te richten\r\n
\r\n
",
- "createSurfaceHub2Info": "Configureer de Autopilot-inschrijvingsinstellingen voor uw Surface Hub 2-apparaten. In Autopilot wordt gebruikersverificatie standaard overgeslagen tijdens OOBE. Meer informatie over Windows Autopilot voor Surface Hub 2.",
- "createWindowsPCInfo": "\r\n
\r\nDe volgende opties worden automatisch ingeschakeld voor Autopilot-apparaten in de modus voor zelfimplementatie:\r\n
\r\n
\r\n
\r\n Selectie van Werk of Thuisgebruik overslaan\r\n
\r\n
\r\n OEM-registratie en OneDrive-configuratie overslaan\r\n
\r\n
\r\n Gebruikersverificatie in OOBE overslaan\r\n
\r\n
",
- "endUserDevice": "Op basis van gebruiker",
- "hideEscapeLink": "Opties voor het wijzigen van het account verbergen",
- "hideEscapeLinkInfo": "Opties om het account te wijzigen en opnieuw te beginnen met een ander account worden respectievelijk weergegeven tijdens de eerste keer dat een apparaat op de aanmeldingspagina van het bedrijf wordt ingesteld en op de domeinfoutpagina. Als u deze opties wilt verbergen, moet u in Microsoft Entra ID een aangepaste huisstijl configureren (dit vereist Windows 10, 1809 of hoger, of Windows 11).",
- "info": "Met de AutoPilot-profielinstellingen wordt de Out-Of-Box Experience gedefinieerd die gebruikers zien als ze Windows voor de eerste keer starten. ",
- "language": "Taal (regio)",
- "languageInfo": "De te gebruiken taal en regio opgeven.",
- "licenseAgreement": "Licentiebepalingen van Microsoft-software",
- "licenseAgreementInfo": "Opgeven of de gebruiksrechtovereenkomst moet worden weergeven aan gebruikers.",
- "plugAndForgetDevice": "Automatische implementatie",
- "privacySettingWarning": "De standaardwaarde voor het verzamelen van diagnostische gegevens is gewijzigd voor apparaten met Windows 10, versie 1903 en hoger of Windows 11. ",
- "privacySettings": "Privacyinstellingen",
- "privacySettingsInfo": "Opgeven of de privacyinstellingen moeten worden weergegeven aan gebruikers.",
- "showCortanaConfigurationPage": "Cortana-configuratie",
- "showCortanaConfigurationPageInfo": "Met Weergeven wordt de Cortana-configuratie-introductie ingeschakeld tijdens het opstarten.",
- "skipEULAWarning": "Belangrijke informatie over het verbergen van licentievoorwaarden",
- "skipKeyboardSelection": "Toetsenbord automatisch configureren",
- "skipKeyboardSelectionInfo": "Als de waarde Waar is ingesteld, wordt de pagina Toetsenbord selecteren overgeslagen als de taal is ingesteld.",
- "subtitle": "AutoPilot-profielen",
- "title": "Out-Of-Box Experience (OOBE)",
- "useOSDefaultLanguage": "Standaardbesturingssysteem",
- "userSelect": "Gebruikersselectie"
- },
- "Sync": {
- "lastRequestedLabel": "Laatste synchronisatieaanvraag",
- "lastSuccessfulLabel": "Laatste voltooide synchronisatie",
- "syncInProgress": "De synchronisatie wordt uitgevoerd. Probeer het later opnieuw.",
- "syncInitiated": "AutoPilot-instellingen synchroniseren is geïnitialiseerd.",
- "syncSettingsTitle": "AutoPilot-instellingen synchroniseren"
- },
- "Title": {
- "devices": "Windows AutoPilot-apparaten"
- },
- "Tooltips": {
- "addressableUserName": "Begroetingsnaam die tijdens de installatie van apparaat wordt weergegeven.",
- "azureADDevice": "Ga naar Apparaatdetails voor het gekoppelde apparaat. N.v.t. betekent dat er geen gekoppeld apparaat is.",
- "batch": "Een tekenreekskenmerk dat kan worden gebruikt om een groep apparaten te identificeren. Met het veld Groepstag van Intune wordt het kenmerk OrderID op Microsoft Entra-apparaten toegewezen.",
- "dateAssigned": "Tijdstempel van het moment waarop het profiel is toegewezen aan het apparaat.",
- "deviceAccountPwd": "Wachtwoord van apparaataccount voor Surface Hub-apparaten. Indien ingevoerd, vult u ook het apparaataccount en de beschrijvende naam in.",
- "deviceAccountUpn": "E-mailadres van apparaataccount voor Surface Hub-apparaten. Indien ingevoerd, vult u ook het wachtwoord en de beschrijvende naam van het apparaataccount in.",
- "deviceDisplayName": "Configureer een unieke naam voor een apparaat. Deze naam wordt genegeerd in de implementaties die zijn samengevoegd met hybride Microsoft Entra. De apparaatnaam is nog steeds afkomstig van het domeindeelnameprofiel voor hybride Microsoft Entra-apparaten.",
- "deviceFriendlyName": "Beschrijvende naam voor Surface Hub-apparaten. Indien ingevoerd, vult u ook het wachtwoord voor het apparaataccount en het apparaataccount in.",
- "deviceName": "De naam die wordt weergegeven wanneer iemand heeft geprobeerd het apparaat te detecteren en verbinding te maken.",
- "deviceUseType": " Het apparaat wordt ingesteld op basis van uw keuze. U kunt later altijd wijzigingen aanbrengen in de instellingen.\r\n
\r\n
Voor vergaderingen en presentaties is Windows Hello niet ingeschakeld en worden de gegevens na elke sessie verwijderd.\r\n
\r\n
Voor teamsamenwerking is Windows Hello ingeschakeld en worden de profielen opgeslagen voor snelle aanmelding
\r\n
",
- "enrollmentState": "Hiermee wordt aangegeven of het apparaat is ingeschreven.",
- "intuneDevice": "Ga naar Apparaatdetails voor het gekoppelde apparaat. N.v.t. betekent dat er geen gekoppeld apparaat is.",
- "lastContacted": "Tijdstempel van het moment waarop voor het laatst contact is opgenomen met het apparaat.",
- "make": "Fabrikant van het geselecteerde apparaat.",
- "model": "Model van het geselecteerde apparaat",
- "profile": "Naam van het profiel dat is toegewezen aan het apparaat.",
- "profileStatus": "Hiermee wordt aangegeven of er een profiel aan het apparaat is toegewezen.",
- "purchaseOrderId": "Inkooporder-id",
- "resourceAccount": "De id van het apparaat of de user principal name (UPN).",
- "serialNumber": "Serienummer van het geselecteerde apparaat.",
- "userPrincipalName": "Gebruiker naar vooraf ingevulde verificatie tijdens de installatie van het apparaat."
- },
- "allDevices": "Alle apparaten",
- "allDevicesAlreadyAssignedError": "Er is al een Autopilot-profiel toegewezen aan alle apparaten.",
- "assignFailedDescription": "Kan de toewijzingen voor {0} niet bijwerken.",
- "assignFailedTitle": "Kan de AutoPilot-profieltoewijzingen niet bijwerken.",
- "assignSuccessDescription": "De toewijzingen voor {0} zijn bijgewerkt.",
- "assignSuccessTitle": "De AutoPilot-profieltoewijzingen zijn bijgewerkt.",
- "assignSufaceHub2ProfileNextStep": "Volgende stappen voor deze implementatie",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Wijs dit profiel toe aan minstens één apparaatgroep",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Wijs een resourceaccount toe aan elk Surface Hub-apparaat waarop u dit profiel implementeert",
- "assignedDevicesCount": "Toegewezen apparaten",
- "assignedDevicesResourceAccountDescription": "
Als u dit profiel op een apparaat wilt implementeren, moet u een resourceaccount toewijzen aan het apparaat. Selecteer één apparaat per keer om een bestaand resourceaccount toe te wijzen of om een nieuw account te maken. Meer informatie over resourceaccounts
",
- "assignedDevicesResourceAccountStatusBarMessage": "In deze tabel vindt u alleen de Surface Hub 2-apparaten waaraan dit profiel is toegewezen.",
- "assigningDescription": "Toewijzingen voor {0} bijwerken.",
- "assigningTitle": "AutoPilot-profieltoewijzingen bijwerken.",
- "autoremediationContext": "Er is een hardwarewijziging gedetecteerd op dit apparaat. We proberen de nieuwe hardware automatisch te registreren. U hoeft nu niets te doen; de status wordt bijgewerkt bij de volgende check-in met het resultaat. Meer informatie over het opnieuw instellen van het profiel.",
- "autoremediationTitle": "Er is een oplossing in behandeling voor het apparaat {0}",
- "cannotDeleteMessage": "Dit profiel is toegewezen aan groepen. U moet de toewijzing van alle groepen aan dit profiel ongedaan maken voordat u het kunt verwijderen.",
- "cannotDeleteTitle": "Kan {0} niet verwijderen",
- "createdDateTime": "Gemaakt",
- "deleteMessage": "Als u dit AutoPilot-profiel verwijdert, verschijnt bij apparaten die aan deze categorie zijn toegewezen de melding Niet toegewezen.",
- "deleteMessageWithPolicySet": "{0} maakt deel uit van een of meer beleidssets. Als u {0} verwijdert, kunt u deze niet langer toewijzen via deze beleidssets.",
- "deleteTitle": "Weet u zeker dat u dit profiel wilt verwijderen?",
- "description": "Beschrijving",
- "deviceType": "Apparaattype",
- "deviceUse": "Apparaatgebruik",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot ondersteunt alleen apparaten die met Microsoft Entra voor Surface Hub 2 zijn samengevoegd. Geef aan hoe apparaten aan Active Directory (AD) in uw organisatie worden toegevoegd.\r\n
\r\n
\r\n
\r\n Met Microsoft Entra samengevoegd: alleen in de cloud zonder on-premises Windows Server Active Directory.\r\n
\r\n Opgeven hoe apparaten worden samengevoegd met Active Directory (AD) in uw organisatie:\r\n
\r\n
\r\n
\r\n Samengevoegd met Microsoft Entra: alleen in de cloud zonder een on-premises Windows Server Active Directory\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Er is een fout opgetreden bij het ophalen van het aantal toegewezen apparaten.",
- "getAssignmentsError": "Er is een fout opgetreden bij het ophalen van de AutoPilot-profieltoewijzingen.",
- "harvestDeviceId": "Alle doelapparaten converteren naar Autopilot",
- "harvestDeviceIdDescription": "Dit profiel kan standaard alleen worden toegepast op Autopilot-apparaten die zijn gesynchroniseerd vanuit de Autopilot-service.",
- "harvestDeviceIdInfo": "\r\n Selecteer Ja als u alle doelapparaten bij Autopilot wilt registreren als deze nog niet zijn geregistreerd. De volgende keer dat geregistreerde apparaten de Windows Out of Box Experience (OOBE) doorlopen, wordt het toegewezen Autopilot-scenario toegepast.\r\n \r\n Houd er rekening mee dat voor bepaalde Autopilot-scenario's specifieke minimale builds van Windows vereist zijn. Controleer of uw apparaat de vereiste minimumbuild heeft om het scenario te doorlopen.\r\n \r\n Als u het profiel verwijdert, worden betrokken apparaten niet verwijderd uit Autopilot. Als u een apparaat wilt verwijderen uit Autopilot, gebruikt u de weergave Windows Autopilot-apparaten.\r\n ",
- "harvestDeviceIdWarning": "Na de conversie kunt u Autopilot-apparaten alleen herstellen door de apparaten te verwijderen uit de lijst met Autopilot-apparaten.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Met Windows AutoPilot Deployment-profielen kunt u de out-of-box experience voor uw apparaten aanpassen.",
- "invalidProfileNameMessage": "Het teken {0} is niet toegestaan",
- "joinTypeLabel": "Microsoft Entra ID samenvoegen als",
- "lastModifiedDateTime": "Laatst gewijzigd:",
- "manualRemediationContext": "Er is een hardwarewijziging gedetecteerd op dit apparaat. Het ontvangt niet automatisch een Autopilot-profiel wanneer het opnieuw wordt ingesteld, tenzij u het apparaat opnieuw registreert. Meer informatie over het opnieuw instellen van het profiel.",
- "manualRemediationTitle": "Apparaat {0} heeft uw aandacht nodig",
- "name": "Naam",
- "noAutopilotProfile": "Geen AutoPilot-profielen",
- "notEnoughPermissionAssignedError": "U hebt onvoldoende machtigingen om dit profiel toe te wijzen aan een of meer van uw geselecteerde groepen. Neem contact op met uw beheerder.",
- "profile": "profiel",
- "resourceAccountStatusBarMessage": "Er is een resourceaccount vereist voor elk Surface Hub 2-apparaat waarvoor dit profiel is geïmplementeerd. Klik voor meer informatie.",
- "selectServices": "Selecteer adreslijstservice-apparaten die worden toegevoegd",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Implementatiemodus",
- "windowsPCCommandMenu": "Windows-pc",
- "directoryServiceLabel": "Samenvoegen met Microsoft Entra ID als"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Beheerdersgroepen",
- "RoleAssignmentAdminDesc": "Gebruikers in de beheerdersgroep zijn de beheerders die aan deze rol zijn toegewezen",
- "rolesMenuTitle": "Eindpuntbeheerder-rollen",
- "RoleAssignmentScopeDesc": "Beheerders aan wie deze rol is toegewezen, kunnen beleidsregels, toepassingen en externe taken beheren",
- "RoleAssignmentScope": "Bereikgroepen"
- },
+ "ScopeTags": {
+ "headerDescription": "Selecteer een of meer groepen om het scriptpakket toe te wijzen."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Detectiescript",
+ "placeholder": "Scripttekst invoeren",
+ "requiredValidationMessage": "Voer het detectiescript in"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Controle van scripthandtekening afdwingen"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Dit script uitvoeren met de referenties van de aangemelde gebruiker"
+ },
+ "RemediationScript": {
+ "infoBox": "Dit script wordt uitgevoerd in de modus voor alleen detecteren omdat er geen herstelscript is."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Script voor automatisch doorvoeren",
+ "placeholder": "Scripttekst invoeren"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Script uitvoeren in 64-bits PowerShell"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Ongeldig script. Een of meer tekens die in het script worden gebruikt, zijn ongeldig."
+ },
+ "headerDescription": "Maak een aangepast scriptpakket op basis van de door u geschreven scripts. Standaard worden scripts elke dag op toegewezen apparaten uitgevoerd.",
+ "infoBox": "Dit script is alleen-lezen. Een aantal instellingen voor dit script is mogelijk uitgeschakeld."
+ },
+ "title": "Aangepast script maken",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Interval",
+ "time": "Datum en tijd"
+ },
+ "Interval": {
+ "day": "Wordt elke dag herhaald",
+ "days": "Wordt om de {0} dagen herhaald",
+ "hour": "Wordt elk uur herhaald",
+ "hours": "Wordt om de {0} uur herhaald",
+ "month": "Wordt elke maand herhaald",
+ "months": "Wordt om de {0} maanden herhaald",
+ "week": "Wordt elke week herhaald",
+ "weeks": "Wordt om de {0} weken herhaald"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) op {1}",
+ "withDate": "{0} op {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Bewerken - {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Alleen geselecteerde blokkerende apps in de technicusfase laten mislukken",
- "apps": "apps",
- "appsListName": "Toepassingslijst",
- "blockingApps": "Blokkerende apps",
- "managedApps": "Beheerde apps",
- "noApps": "Geen toepassingen",
- "noAppsError": "Er is een fout opgetreden bij het ophalen van de toepassingen",
- "selectApps": "Apps selecteren",
- "selectedAppsCount": "{0} apps geselecteerd (max. 100)",
- "useSelectedAppsAll": "Alles",
- "useSelectedAppsSelected": "Geselecteerd",
- "useSelectedAppsToggleLabel": "Gebruik van het apparaat blokkeren totdat vereiste apps zijn geïnstalleerd als deze zijn toegewezen aan de gebruiker/het apparaat"
- },
- "Header": {
- "application": "Toepassing",
- "publisher": "Uitgever",
- "version": "Versie"
- },
- "SearchBox": {
- "ariaLabel": "Apps zoeken",
- "placeHolder": "Zoeken op naam of uitgever"
- },
- "allowToUseToggle": "Toestaan dat gebruikers het apparaat gebruiken als er een installatiefout optreedt",
- "blockToggle": "Het apparaat blokkeren tot alle apps en profielen zijn geïnstalleerd",
- "blockToolTip": "Als u Microsoft Word aan deze lijst toevoegt, kunnen doelgebruikers en apparaten bijvoorbeeld de pagina met de inschrijvingsstatus niet verlaten totdat Word is geïnstalleerd.",
- "collectLogToggle": "Logboekverzameling en de diagnostische pagina inschakelen voor eindgebruikers",
- "create": "Profiel maken",
- "customMessageTextBox": "Foutbericht",
- "customMessageToggle": "Aangepast bericht weergeven als de tijdslimiet bereikt wordt of er zich een fout voordoet",
- "enableForAutopilotOnlyToggle": "Alleen pagina weergeven voor apparaten die zijn ingericht door Out-of-Box Experience (OOBE)",
- "installQualityUpdatesToggle": "Windows-kwaliteitsupdates installeren (het apparaat wordt mogelijk opnieuw opgestart) (preview)",
- "progressToggle": "De voortgang van de app- en profielconfiguratie weergeven",
- "resetToggle": "Toestaan dat gebruikers het apparaat opnieuw instellen als er een installatiefout optreedt",
- "timeout": "Een foutbericht weergeven als de installatie langer duurt dan het opgegeven aantal minuten"
- },
+ "OfficeUpdateChannel": {
+ "current": "Huidig kanaal",
+ "deferred": "Halfjaarlijks ondernemingskanaal",
+ "firstReleaseCurrent": "Huidig kanaal (preview-versie)",
+ "firstReleaseDeferred": "Halfjaarlijks ondernemingskanaal (preview-versie)",
+ "monthlyEnterprise": "Monthly-kanaal (Enterprise)",
+ "placeHolder": "Kies een optie"
+ },
"TableHeaders": {
"activity": "Activiteit",
"activityName": "Naam van activiteit",
@@ -1293,30 +417,175 @@
"excludedGroups": "Uitgesloten groepen",
"licenseType": "Licentietype"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Configureer de pincode- en referentievereisten waaraan gebruikers moeten voldoen voor toegang tot apps in een werkomgeving."
- },
- "DataProtection": {
- "infoText": "Deze groep bevat besturingselementen voor preventie van gegevensverlies (DLP), zoals beperkingen voor Knippen, Kopiëren, Plakken en Opslaan als. Met deze instellingen wordt bepaald hoe gebruikers met gegevens in de apps kunnen werken."
- },
- "DeviceTypes": {
- "selectOne": "Selecteer ten minste één apparaattype."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Richten op apps op alle apparaattypen"
- },
- "infoText": "Kies hoe u dit beleid op apps op verschillende apparaten wilt toepassen. Voeg vervolgens ten minste één app toe.",
- "selectOne": "Selecteer ten minste één app om een beleid te maken."
- }
- },
- "AssignmentAction": {
- "exclude": "Uitgesloten",
- "include": "Inbegrepen",
- "includeAllDevicesVirtualGroup": "Inbegrepen",
- "includeAllUsersVirtualGroup": "Inbegrepen"
- },
+ "Inputs": {
+ "accountDomain": "Accountdomein",
+ "accountDomainHint": "bijvoorbeeld contosodomain",
+ "accountDomainInfoBalloon": "Geef accountdomein van de gebruiker op.",
+ "accountTypeInfoBalloon": "Het accounttype opgeven dat wordt geconfigureerd op basis van het verificatiemodel",
+ "allowContactSetting": "Toestaan dat de gebruiker de instelling voor contactpersonen kan wijzigen",
+ "allowContactSyncInfoBalloon": "Opgeven of de gebruiker de synchronisatie-instelling voor contactpersonen mag wijzigen",
+ "allowUserChange": "Toestaan dat de gebruiker de instelling kan wijzigen",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Geef een pakketnaam op die vergelijkbaar is met com.microsoft.word",
+ "androidUrlValidation": "Voer een geldige URL in die vergelijkbaar is met https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "Context voor app-installatie",
+ "appUrlLabel": "Appstore-URL",
+ "appleUrlValidation": "Voer een geldige URL in die vergelijkbaar is met https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Toepasselijk apparaattype",
+ "assignmentActionLabel": "Modus",
+ "authenticationMethodInfoBalloon": "De verificatiemethode voor de gebruiker opgeven",
+ "authenticationMetod": "Verificatiemethode",
+ "authenticationType": "Verificatietype",
+ "authenticationTypeInfoBalloon": "Het verificatietype voor de gebruiker opgeven",
+ "availableLicenseCount": "Beschikbare licenties",
+ "basicAuth": "Basisverificatie",
+ "biometricsInfoBalloon": "Biometrie, bijvoorbeeld TouchID of FaceID, kan worden vereist voor gebruikers om toegang te krijgen tot de app op hun apparaat. Indien nodig wordt biometrie gebruikt naast de verificatiemethode die is geselecteerd in dit profiel. Deze instelling moet niet worden ingeschakeld wanneer beveiligingsbeleid voor de Intune App is geïmplementeerd, omdat het beveiligingsbeleid voor de app toegangsvereisten omvat waaraan moet worden voldaan voordat toegang wordt verkregen tot beheerde gegevens. Als u beide inschakelt, leidt dit tot meerdere meldingen voor toegang tot Outlook Mobile. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt.",
+ "bookNameLabel": "Boeknaam",
+ "bundleDescriptionHint": "Voer een beschrijving voor de opgenomen apps in.",
+ "calendar": "Agenda",
+ "categoryLabel": "Categorie",
+ "categoryNameLabel": "Standaardnaam",
+ "certProfileType": "Type van het certificaatprofiel",
+ "certificate": "Certificaat",
+ "certificates": "Certificaten",
+ "commandLineLabel": "Opdrachtregelargumenten",
+ "commandLineSizeHint": "De maximale lengte van de tekst voor opdrachtregelargumenten is 1024 tekens",
+ "configurationSettingsFormatLabel": "Indeling van de configuratie-instellingen",
+ "configurationSettingsLabel": "Indeling voor instellingen",
+ "contactSync": "Contactpersonen opslaan",
+ "contactSyncInfoBalloon": "Door het opslaan van contactpersonen naar het systeemeigen adresboek van het mobiele apparaat kunnen nieuwe oproepen en sms-berichten worden gekoppeld met de bestaande Outlook-contactpersonen van de gebruiker. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt.",
+ "contacts": "Contacten",
+ "createdDateTime": "Gemaakt",
+ "defaultCategoryHint": "Standaardcategorieën kunnen niet worden gewijzigd",
+ "deploySMimeCertsFromIntune": "S/MIME-certificaten implementeren via Intune",
+ "descriptionGenericLabel": "Beschrijving",
+ "descriptionHint": "Een beschrijving invoeren...",
+ "descriptionLabel": "Beschrijving",
+ "descriptionSizeHint": "De beschrijving mag niet langer zijn dan 10.000 tekens",
+ "developerLabel": "Ontwikkelaar",
+ "developerSizeHint": "De maximale lengte van de naam van de ontwikkelaar is 256 tekens.",
+ "disable": "Uitschakelen",
+ "disabled": "Uitgeschakeld",
+ "displayNameLabel": "Naam",
+ "displayVersionHint": "De app-versie invoeren",
+ "displayVersionLabel": "App-versie",
+ "displayVersionLengthCheck": "De weergaveversie mag maximaal 130 tekens lang zijn",
+ "eBookCategoryNameLabel": "Standaardnaam",
+ "emailAccount": "Naam van e-mailaccount",
+ "emailAccountHint": "bijvoorbeeld bedrijfs-e-mail",
+ "emailAccountInfoBalloon": "De weergavenaam voor het e-mailaccount opgeven zoals deze wordt weergeven aan gebruikers op hun apparaten",
+ "emailAddressAttribute": "E-mailadreskenmerk van Microsoft Entra-id",
+ "emailAddressInfoBalloon": "Het e-mailadres opgeven dat moet worden gebruikt voor het verzenden en ontvangen van e-mail",
+ "emailServer": "E-mailserver",
+ "emailServerHint": "bijvoorbeeld mail.contoso.com",
+ "emailServerInfoBalloon": "De hostnaam voor Exchange Server opgeven",
+ "enable": "Inschakelen",
+ "enableSMime": "S/MIME inschakelen",
+ "enabled": "Inschakelen",
+ "encryptAllEmails": "Alle e-mailberichten versleutelen",
+ "encryptionCertificates": "Versleutelingscertificaten",
+ "endUserNotifications": "Meldingen voor eindgebruikers",
+ "enrollmentTypeLabel": "Type apparaatregistratie",
+ "externalRecipients": "De MailTip Externe geadresseerden",
+ "externalRecipientsInfoBalloon": "De MailTip Externe ontvangers wordt weergegeven als de afzender een externe ontvanger of een distributiegroep met externe ontvangers toevoegt. Deze MailTip informeert de afzender als een bericht dat de afzender heeft opgesteld, wordt verzonden naar ontvangers buiten de organisatie. De afzender kan dan de juiste beslissingen nemen over taalgebruik, toon en inhoud. Deze MailTip is alleen beschikbaar voor on-premises en Exchange Online-accounts die gebruikmaken van hybride moderne verificatie. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Aan gebruikt.",
+ "focusedInbox": "Postvak IN met prioriteit",
+ "focusedInboxInfoBalloon": "Met Postvak IN met prioriteit wordt het postvak IN gescheiden in twee tabbladen: Met prioriteit en Overige. Uw belangrijkste e-mails bevinden zich op het tabblad Met prioriteit. De rest staat binnen handbereik, maar buiten direct zicht, op het tabblad Overige. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Aan gebruikt.",
+ "fullScreenEnabledLabel": "Volledig scherm",
+ "gmailNineAmountOfEmail": "Aantal dagen e-mail voor synchronisatie",
+ "gmailNineAuthenticationMethodInfoBalloon": "Selecteer hoe gebruikers moeten worden geverifieerd bij de e-mailserver. Gebruik certificaten om de meest veilige en naadloze ervaring aan eindgebruikers te bieden. Op certificaten gebaseerde verificatie is nog niet beschikbaar omdat SCEP- en PKCS-certificaatprofielen voor apparaten van de apparaat-eigenaar niet beschikbaar zijn. ",
+ "gmailNineCertificateUPNInfoBalloon": "Het certificaat moet een User Principal Name (UPN) bevatten als alternatieve naam voor het onderwerp.",
+ "gmailNineEmailAddressInfoBalloon": "Het kenmerk dat Intune krijgt van de Microsoft Entra-id om dynamisch het e-mailadres te genereren dat door het profiel wordt gebruikt, bijvoorbeeld MyName@contoso.com (UPN). Meer informatie over Microsoft Entra-kenmerken voor e-mailprofielen.",
+ "gmailNineEmailServerInfoBalloon": "De Exchange-locatie (URL) van de e-mailserver waarmee de door u opgegeven app verbinding maakt om e-mailberichten op te halen.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Hiermee kunt u bepalen hoeveel e-mail met de client wordt gesynchroniseerd.",
+ "gmailNineSSLInfoBalloon": "SSL inschakelen om alle communicatie met de e-mailserver te beveiligen.",
+ "gmailNineUsernameInfoBalloon": "Het kenmerk dat Intune krijgt van de Microsoft Entra-id om dynamisch de gebruikersnaam te genereren die door het profiel wordt gebruikt, bijvoorbeeld MyName@contoso.com (UPN) of MyName (gebruikersnaam). Meer informatie over Microsoft Entra-kenmerken voor e-mailprofielen.",
+ "ignoreManifestScope": "Manifestbereik negeren",
+ "ignoreVersionDetection": "App-versie negeren",
+ "informationUrlLabel": "Informatie-URL",
+ "informationUrlSizeHint": "De maximale lengte van de informatie-URL is 1024 tekens",
+ "installAsManaged": "Installeren als beheerd",
+ "installationSourceLabel": "App-type",
+ "installerTypeInfoBalloon": "Het installatietype van het toepassingspakket.",
+ "installerTypeLabel": "Type installatieprogramma",
+ "isFeatured": "Deze weergeven als aanbevolen app in de bedrijfsportal",
+ "isMAMEnabledToggleLabel": "Ja",
+ "lastModifiedDateTime": "Tijd laatst bijgewerkt",
+ "ldapUrl": "LDAP-URL",
+ "licensingType": "Ondersteunt apparaatcontexttoewijzing",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimumversie van het besturingssysteem",
+ "modernAuth": "Moderne verificatie",
+ "nameHint": "Een naam invoeren",
+ "nameLabel": "Naam",
+ "nameSizeHint": "De maximale lengte van de naam is 512 tekens.",
+ "notConfigured": "Niet geconfigureerd",
+ "notesLabel": "Opmerkingen",
+ "notesSizeHint": "De maximale lengte van de tekst van de notities is 1024 tekens.",
+ "notificationType": "Meldingstype",
+ "oneDay": "Eén dag",
+ "oneMonth": "Een maand",
+ "oneWeek": "Eén week",
+ "outlookSMimeSettings": "S/MIME-instellingen voor Outlook",
+ "ownerLabel": "Eigenaar",
+ "ownerSizeHint": "De maximale lengte van de naam van de eigenaar is 256 tekens.",
+ "packageIdLabel": "Pakket-id",
+ "packageNameLabel": "Pakketnaam",
+ "pivCredentialNotConfigured": "U hebt geen verlener van afgeleide referenties geselecteerd voor de tenant. Configureer een verlener om dit beleid op apparaten toe te passen.",
+ "platformLabel": "Platform",
+ "policyDescriptionLabel": "Beschrijving",
+ "policyNameLabel": "Naam",
+ "preComposedIconEnabled": "Vooraf samengesteld",
+ "primarySMTPAddress": "Primair SMTP-adres",
+ "privacyUrlLabel": "Privacy-URL",
+ "publisherHint": "Voer de naam van een uitgever in",
+ "publisherLabel": "Uitgever",
+ "publisherSizeHint": "De naam van de uitgever moet tussen de 2 en 1024 tekens lang zijn (inclusief)",
+ "require": "Vereisen",
+ "requireBiometrics": "Biometrie vereisen toegang tot de app",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "Er is minstens één bereiktag vereist",
+ "searchAppLabel": "App selecteren",
+ "searchAppLinkText": "Zoeken in de App Store",
+ "searchWinGetPublicRepositoryLinkText": "Opslagplaats van de community van Windows-pakketbeheerder doorzoeken",
+ "searchWinGetStoreRepositoryLinkText": "Zoeken in de Microsoft Store-app (nieuw)",
+ "selectAAD": "Een Microsoft Entra-kenmerk selecteren",
+ "selectAppFileLabel": "Bestand selecteren",
+ "selectAppFileLinkText": "App-pakketbestand selecteren",
+ "selectAppFileToUpdateLabel": "Een bestand selecteren dat moet worden bijgewerkt",
+ "selectAuthMethod": "Een verificatiemethode selecteren",
+ "selectAuthType": "Een verificatietype selecteren",
+ "selectCatalogAppLabel": "App selecteren",
+ "selectCatalogAppLinkText": "Zoeken in de Enterprise App-catalogus",
+ "selectCertificate": "Selecteer een certificaat",
+ "signAllEmails": "Alle e-mailberichten ondertekenen",
+ "signingCertificates": "Handtekeningcertificaten",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Beschrijving van suite",
+ "suiteNameLabel": "Naam van suite",
+ "targetApplicationBundleIdentifier": "Bundel-id van doeltoepassing",
+ "targetedPlatformsLabel": "Gericht platform",
+ "tasks": "Taken",
+ "threeDays": "Drie dagen",
+ "totalLicenseCount": "Totaal aantal licenties",
+ "twoWeeks": "Twee weken",
+ "unifiedAssignmentsLabel": "Toewijzen aan:",
+ "unlimited": "Onbeperkt",
+ "urlHint": "Voer een geldige URL in",
+ "useManagedBrowserHint": "Alleen Android en iOS. Meer informatie.",
+ "useManagedBrowserLabel": "Een beheerde browser vereisen om deze koppeling te openen",
+ "userPrinicipalName": "User principal name",
+ "username": "Gebruikersnaam",
+ "usernameAttribute": "Gebruikersnaamkenmerk van Microsoft Entra-id",
+ "usernameAttributreInfoBalloon": "De user principal name opgeven van het e-mailprofiel dat wordt gebruikt voor verificatie van het account",
+ "usernamePassword": "Gebruikersnaam en wachtwoord",
+ "webAppUrlHint": "Voer een geldige URL in die begint met http:// of https://",
+ "webAppUrlLabel": "App-URL",
+ "webAppUrlSizeHint": "De maximale lengte van de app-URL is 1024 tekens.",
+ "windowsUrlValidation": "Voer een geldige URL in die vergelijkbaar is met https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "XML-gegevens zijn ingevoerd",
+ "xmlFormatInvalid": "De indeling van het XML-beleid is ongeldig.",
+ "xmlTooLarge": "De invoergrootte moet kleiner zijn dan 1 MB."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Betrokken gebruikers worden beperkt door de co-beheerinstantiepagina met de volgende hoogste prioriteit of door de standaard-co-beheerinstantiepagina als er geen andere co-beheerinstantiepagina is toegewezen.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Co-beheerinstantie",
"settingDescription": "Met de instellingen voor co-beheer wordt bepaald wie de eigenaar is van de workloads."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise-systeem-app",
- "androidForWorkApp": "Beheerde Google Play Store-app",
- "androidLobApp": "Line-Of-Business-app voor Android",
- "androidStoreApp": "Android Store-app",
- "builtInAndroid": "Ingebouwde Android-app",
- "builtInApp": "Ingebouwde app",
- "builtInIos": "Ingebouwde iOS-app",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS-webclip",
- "iosLobApp": "Line-Of-Business-app voor iOS",
- "iosStoreApp": "iOS Store-app",
- "iosVppApp": "Volume Purchase Program-app voor iOS",
- "lineOfBusinessApp": "Line-Of-Business-app",
- "macOSDmgApp": "macOS-app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Line-Of-Business-app voor macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365-apps (macOS)",
- "macOSPkgApp": "macOS-app (PKG)",
- "macOSWebClip": "Webclip voor macOS",
- "macOsVppApp": "Volume Purchase Program-app voor macOS",
- "managedAndroidLobApp": "Beheerde Line-Of-Business-app voor Android",
- "managedAndroidStoreApp": "Beheerde Android Store-app",
- "managedGooglePlayApp": "Beheerde Google Play Store-app",
- "managedGooglePlayPrivateApp": "Persoonlijke beheerde Google Play-app",
- "managedGooglePlayWebApp": "Webkoppeling voor beheerde Google Play",
- "managedIosLobApp": "Beheerde Line-Of-Business-app voor iOS",
- "managedIosStoreApp": "Beheerde iOS Store-app",
- "microsoftStoreForBusinessApp": "Microsoft Store voor Bedrijven-app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store voor Bedrijven",
- "officeSuiteApp": "Microsoft 365-apps (Windows 10 en hoger)",
- "webApp": "Webkoppeling",
- "windowsAppXLobApp": "AppX Line-Of-Business-app voor Windows",
- "windowsClassicApp": "Windows-app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 en hoger)",
- "windowsMobileMsiLobApp": "MSI Line-Of-Business-app voor Windows",
- "windowsPhone81AppXBundleLobApp": "AppX Line-Of-Business-app voor Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "AppX Line-Of-Business-app voor Windows Phone 8.1",
- "windowsPhone81StoreApp": "Windows Phone 8.1 Store-app",
- "windowsPhoneXapLobApp": "XAP Line-Of-Business-app voor Windows Phone",
- "windowsStoreApp": "Microsoft Store-app (verouderd)",
- "windowsUniversalAppXLobApp": "Universele AppX Line-Of-Business-app voor Windows",
- "windowsUniversalLobApp": "Universele Line-Of-Business-app voor Windows",
- "windowsWebApp": "Windows-webkoppeling"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Aanbevolen",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrein",
+ "countryNameZA": "Zuid-Afrika",
+ "countryNameJO": "Jordanië",
+ "countryNameSD": "Soedan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Tsjechië",
+ "countryNameLT": "Litouwen",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Oeganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hongkong SAR",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Saoedi-Arabië",
+ "countryNamePG": "Papoea-Nieuw-Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "India",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Roemenië",
+ "countryNameKZ": "Kazachstan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Georgië",
+ "countryNameTT": "Trinidad en Tobago",
+ "countryNameMP": "Noordelijke Marianen",
+ "countryNameMV": "Maldiven",
+ "countryNameFI": "Finland",
+ "countryNameNO": "Noorwegen",
+ "countryNameEE": "Estland",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Oezbekistan",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tadzjikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "Frankrijk",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italië",
+ "countryNameAZ": "Azerbeidzjan",
+ "countryNameKG": "Kirgizië",
+ "countryNameWF": "Wallis en Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falklandeilanden",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "Zuid-Soedan",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haïti",
+ "countryNameSY": "Syrië",
+ "countryNameMD": "Moldavië",
+ "countryNameVC": "Saint Vincent en de Grenadines",
+ "countryNameID": "Indonesië",
+ "countryNameRE": "Réunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "Noord-Macedonië",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Frans-Polynesië",
+ "countryNameKY": "Kaaimaneilanden",
+ "countryNameIO": "Brits Territorium in de Indische Oceaan",
+ "countryNameRU": "Rusland",
+ "countryNameMA": "Marokko",
+ "countryNameAU": "Australië",
+ "countryNameBO": "Bolivia",
+ "countryNameVA": "Vaticaanstad",
+ "countryNameVG": "Britse Maagdeneilanden",
+ "countryNameFM": "Micronesia",
+ "countryNameAQ": "Antarctica",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brazilië",
+ "countryNameIS": "IJsland",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgarije",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahama's",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macau SAR",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "Amerikaans-Samoa",
+ "countryNameBQ": "Bonaire, Sint Eustatius en Saba",
+ "countryNameMF": "Saint-Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Nieuw-Caledonië",
+ "countryNameAC": "Ascension",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladesh",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Canada",
+ "countryNameSH": "Sint-Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolië",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Kameroen",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japan",
+ "countryNameCY": "Cyprus",
+ "countryNameCD": "Democratische Republiek Congo",
+ "countryNameTN": "Tunesië",
+ "countryNameTR": "Turkije",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Zweden",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Cambodja",
+ "countryNamePL": "Polen",
+ "countryNameDZ": "Algerije",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalië",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Egypte",
+ "countryNameGF": "Frans-Guyana",
+ "countryNameNZ": "Nieuw-Zeeland",
+ "countryNamePS": "Palestijnse Autoriteit",
+ "countryNameIL": "Israël",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Griekenland",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauritanië",
+ "countryNameVI": "Amerikaanse Maagdeneilanden",
+ "countryNameGQ": "Equatoriaal-Guinea",
+ "countryNameMX": "Mexico",
+ "countryNameDJ": "Djibouti",
+ "countryNameGN": "Guinee",
+ "countryNameCN": "China",
+ "countryNameMZ": "Mozambique",
+ "countryNameBV": "Bouveteiland",
+ "countryNameNF": "Norfolkeiland",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "Zuid-Georgia en de Zuidelijke Sandwicheilanden",
+ "countryNameRS": "Servië",
+ "countryNameCC": "Cocoseilanden",
+ "countryNameNA": "Namibië",
+ "countryNameDE": "Duitsland",
+ "countryNameCG": "Republiek Congo",
+ "countryNameKW": "Koeweit",
+ "countryNameMH": "Marshalleilanden",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarus",
+ "countryNameMY": "Maleisië",
+ "countryNameST": "São Tomé en Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Tsjaad",
+ "countryNameCX": "Christmaseiland",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinee-Bissau",
+ "countryNameUA": "Oekraïne",
+ "countryNameCU": "Cuba",
+ "countryNameCO": "Colombia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Kroatië",
+ "countryNameSC": "Seychellen",
+ "countryNameNL": "Nederland",
+ "countryNameUM": "Amerikaanse ondergeschikte afgelegen eilanden",
+ "countryNameIM": "Israël",
+ "countryNameFJ": "Fiji",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "Verenigd Koninkrijk",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovenië",
+ "countryNameAM": "Armenië",
+ "countryNameAR": "Argentinië",
+ "countryNamePM": "Saint-Pierre en Miquelon",
+ "countryNameTF": "Territorium Franse Zuidelijke en Zuidpoolgebieden",
+ "countryNameDO": "Dominicaanse Republiek",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "Centraal-Afrikaanse Republiek",
+ "countryNameBE": "België",
+ "countryNameKM": "Comoren",
+ "countryNameLY": "Libië",
+ "countryNameIE": "Ierland",
+ "countryNameKP": "Noord-Korea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slowakije",
+ "countryNameTC": "Turks- en Caicoseilanden",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Jemen",
+ "countryNameBA": "Bosnië en Herzegovina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chili",
+ "countryNameIQ": "Irak",
+ "countryNameSJ": "Spitsbergen en Jan Mayen",
+ "countryNameAX": "Åland",
+ "countryNameKE": "Kenia",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Faeröer",
+ "countryNameBL": "Saint-Barthélemy",
+ "countryNameLB": "Libanon",
+ "countryNameJM": "Jamaica",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Spanje",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapore",
+ "countryNameAL": "Albanië",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d’Ivoire",
+ "countryNameTW": "Taiwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cookeilanden",
+ "countryNameTH": "Thailand",
+ "countryNameHM": "Heard- en McDonaldeilanden",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "Verenigde Staten",
+ "countryNameAT": "Oostenrijk",
+ "countryNameKR": "Zuid-Korea",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Denemarken",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Ethiopië",
+ "countryNameMG": "Madagascar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxemburg",
+ "countryNameQA": "Qatar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Salomonseilanden",
+ "countryNameAE": "Verenigde Arabische Emiraten",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua en Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Hongarije",
+ "countryNameSX": "Sint-Maarten",
+ "countryNameCH": "Zwitserland",
+ "countryNamePN": "Pitcairneilanden",
+ "countryNameGL": "Groenland",
+ "countryNamePH": "Filipijnen",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts en Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Letland",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Auteur",
+ "template": "Sjabloonnaam"
+ },
+ "Row": {
+ "ariaLabel": "rij {0} van {1} kolom {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Begin helemaal opnieuw en selecteer de gewenste eigenschappen in de bibliotheek met beschikbare inventariseigenschappen"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Begin nieuwe instellingen en selecteer de gewenste instellingen in de bibliotheek met beschikbare instellingen",
+ "title": "Catalogus met instellingen"
+ },
+ "Templates": {
+ "subtitle": "Sjablonen bevatten groepen instellingen, geordend op functionaliteit. Gebruik een sjabloon als u niet handmatig beleidsregels wilt maken of als u apparaten wilt configureren voor toegang tot bedrijfsnetwerken, zoals het configureren van wifi of een VPN.",
+ "title": "Sjablonen"
+ },
+ "noData": "Er zijn geen beleidssjablonen gevonden"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Aanbevolen SmartScreen-instellingen voor de Microsoft Edge-app: Windows 10 in cloudconfiguratiesjabloon. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Eindpuntdetectie en -reactie"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "App- en browserisolatie",
+ "aSRApplicationControl": "Toepassingsbeheer",
+ "aSRAttackSurfaceReduction": "Regels voor het verminderen van kwetsbaarheid voor aanvallen",
+ "aSRDeviceControl": "Apparaatbeheer",
+ "aSRExploitProtection": "Exploit Protection",
+ "aSRWebProtection": "Webbeveiliging (Microsoft Edge verouderd)",
+ "aVExclusions": "Microsoft Defender Antivirus-uitsluitingen",
+ "antivirus": "Microsoft Defender Antivirus",
+ "cloudPC": "Windows 365-beveiligingsbasislijn",
+ "default": "Eindpuntbeveliging",
+ "defenderTest": "Demo voor Microsoft Defender for Endpoint",
+ "diskEncryption": "BitLocker",
+ "eDR": "Eindpuntdetectie en -reactie",
+ "edgeSecurityBaseline": "Microsoft Edge-basislijn",
+ "edgeSecurityBaselinePreview": "Preview-versie: Microsoft Edge-basislijn",
+ "editionUpgradeConfiguration": "Editie-upgrade en modus wisselen",
+ "firewall": "Windows Firewall",
+ "firewallRules": "Windows Firewall-regels",
+ "identityProtection": "Accountbeveiliging",
+ "identityProtectionPreview": "Accountbeveiliging (preview)",
+ "mDMSecurityBaseline1810": "MDM-beveiligingsbasislijn voor Windows 10 en hoger voor oktober 2018",
+ "mDMSecurityBaseline1810Preview": "Preview: MDM-beveiligingsbasislijn voor Windows 10 en hoger voor oktober 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM-beveiligingsbasislijn voor Windows 10 voor oktober 2018 (bètaversie)",
+ "mDMSecurityBaseline1906": "MDM-beveiligingsbasislijn voor Windows 10 en hoger voor mei 2019",
+ "mDMSecurityBaseline2004": "MDM-beveiligingsbasislijn voor Windows 10 en hoger voor augustus 2020",
+ "mDMSecurityBaseline2101": "MDM-beveiligingsbasislijn voor Windows 10 en later december 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS-firewall",
+ "microsoftDefenderBaseline": "Basislijn voor Microsoft Defender for Endpoint",
+ "office365Baseline": "Microsoft Office O365-basislijn",
+ "office365BaselinePreview": "Preview: Microsoft Office O365-basislijn",
+ "securityBaselines": "Beveiligingsbasislijnen",
+ "test": "Testsjabloon",
+ "testFirewallRulesSecurityTemplateName": "Windows Firewall-regels (test)",
+ "testIdentityProtectionSecurityTemplateName": "Accountbeveiliging (test)",
+ "windowsSecurityExperience": "Windows-beveiligingservaring"
+ },
+ "Firewall": {
+ "mDE": "Windows Firewall"
+ },
+ "FirewallRules": {
+ "mDE": "Windows Firewall-regels"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "Instellingen voor het verplaatsen van bekende mappen in OneDrive: Windows 10 in de cloudconfiguratiesjabloon. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Accountbeveiliging",
+ "administrativeTemplates": "Beheersjablonen",
+ "androidCompliancePolicy": "Nalevingsbeleid van Android",
+ "aospDeviceOwnerCompliancePolicy": "Nalevingsbeleid van Android (AOSP)",
+ "applicationControl": "App-beheer voor Bedrijven",
+ "attackSurfaceReductionRules": "Regels voor het verminderen van kwetsbaarheid voor aanvallen",
+ "bitlocker": "BitLocker",
+ "custom": "Aangepast",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedPersonalIdentityVerificationCredential": "Afgeleide referentie",
+ "deviceControl": "Apparaatbeheer",
+ "deviceFeatures": "Apparaatfuncties",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Apparaatvergrendeling",
+ "deviceOwner": "Volledig beheerde en toegewezen werkprofielen in bedrijfseigendom",
+ "deviceRestrictions": "Apparaatbeperkingen",
+ "deviceRestrictionsWindows10Team": "Apparaatbeperkingen (Windows 10 Team)",
+ "domainJoinPreview": "Domeindeelname",
+ "editionUpgradeAndModeSwitch": "Editie-upgrade en modus wisselen",
+ "education": "Educatief",
+ "email": "E-mail",
+ "emailSamsungKnoxOnly": "E-mail (alleen Samsung KNOX)",
+ "endpointProtection": "Endpoint Protection",
+ "expeditedCheckin": "Configuratie voor Mobile Device Management",
+ "exploitProtection": "Exploit Protection",
+ "extensions": "Extensies",
+ "hardwareConfigurations": "BIOS-configuraties en andere instellingen",
+ "identityProtection": "Identiteitsbeveiliging",
+ "iosCompliancePolicy": "Nalevingsbeleid van iOS",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Lidmaatschap van lokale gebruikersgroep",
+ "macCompliancePolicy": "Nalevingsbeleid van Mac",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Beveiligingsbasislijn voor Microsoft 365-apps voor ondernemingen",
+ "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus-uitsluitingen",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender voor Eindpunt (desktopapparaten met Windows 10 of hoger)",
+ "microsoftDefenderFirewallRules": "Windows Firewall-regels",
+ "microsoftDefenderforEndpointSecurityBaseline": "Basislijn voor Microsoft Defender voor Eindpunt-beveiligingsbasislijn",
+ "microsoftEdgeBaseline": "Beveiligingsbasislijn voor Microsoft Edge",
+ "mxProfileZebraOnly": "MX-profiel (alleen Zebra)",
+ "networkBoundary": "De grens van het netwerk",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Groepsbeleid overschrijven",
+ "pkcsCertificate": "PKCS-certificaat",
+ "pkcsImportedCertificate": "Geïmporteerd PKCS-certificaat",
+ "preferenceFile": "Voorkeursbestand",
+ "presets": "Voorinstellingen",
+ "scepCertificate": "SCEP-certificaat",
+ "secureAssessmentEducation": "Veilige evaluatie (onderwijs)",
+ "securityBaselineForHololens2Advanced": "Geavanceerde beveiligingsbasislijn voor HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standaardbeveiligingsbasislijn voor HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Beveiligingsbasislijn voor Microsoft Edge",
+ "settingsCatalog": "Catalogus met instellingen",
+ "sharedMultiUserDevice": "Gedeeld apparaat voor meerdere gebruikers",
+ "softwareUpdates": "Software-updates",
+ "trustedCertificate": "Vertrouwd certificaat",
+ "unknown": "Onbekend",
+ "unsupported": "Niet-ondersteund",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi importeren",
+ "windows10CompliancePolicy": "Nalevingsbeleid van Windows 10/11",
+ "windows10MobileCompliancePolicy": "Nalevingsbeleid van Windows 10 Mobile",
+ "windows10XScep": "SCEP-certificaat - TEST",
+ "windows10XTrustedCertificate": "Vertrouwd certificaat - TEST",
+ "windows10XVPN": "VPN - TEST",
+ "windows10XWifi": "Wi-Fi - TEST",
+ "windows11SecurityBaseline": "Beveiligingsbasislijn voor Windows 10 en hoger",
+ "windows365SecurityBaseline": "Windows 365-beveiligingsbasislijn",
+ "windows8CompliancePolicy": "Nalevingsbeleid van Windows 8",
+ "windowsHealthMonitoring": "Windows-statuscontrole",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Nalevingsbeleid van Windows Phone",
+ "windowsUpdateforBusiness": "Windows Update voor Bedrijven",
+ "wiredNetwork": "Bekabeld netwerk",
+ "workProfile": "Werkprofiel in persoonlijk eigendom"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Update geleidelijk aan beschikbaar maken",
+ "immediateStart": "Update zo snel mogelijk beschikbaar maken",
+ "startDateOnly": "Update op een specifieke datum beschikbaar maken"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Automatisch weigeren",
+ "autoGrant": "Automatisch verlenen",
+ "prompt": "Vragen"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Locatietoegang (ruw)",
+ "accessFineLocation": "Locatietoegang (fijn)",
+ "addVoicemail": "Voicemail toevoegen",
+ "bodySensors": "Lichaamssensorgegevens toestaan",
+ "bodySensorsBackground": "Sensorgegevens van hoofdtekst op de achtergrond toestaan",
+ "callPhone": "Telefoongesprekken voeren",
+ "camera": "Camera",
+ "getAccounts": "Accounts ophalen",
+ "nearbyDevices": "Apparaten in de buurt",
+ "nearbyWifiDevices": "Wifi-apparaten in de buurt",
+ "postNotifications": "Post-meldingen",
+ "processOutgoingCalls": "Uitgaande gesprekken verwerken",
+ "readCalendar": "Agenda (lezen)",
+ "readCallLog": "Gesprekgeschiedenis (lezen)",
+ "readContacts": "Contactpersonen (lezen)",
+ "readExternalStorage": "Externe opslag (lezen)",
+ "readMediaAudio": "Media-audio (lezen)",
+ "readMediaImages": "Media-afbeeldingen (lezen)",
+ "readMediaVideo": "Mediavideo (lezen)",
+ "readPhoneState": "Telefoonstatus (lezen)",
+ "readSMS": "Sms (lezen)",
+ "receiveMMS": "Mms (ontvangen)",
+ "receiveSMS": "Sms (ontvangen)",
+ "receiveWAPPush": "WAP-pushberichten (ontvangen)",
+ "recordAudio": "Audio opnemen",
+ "sendSMS": "Sms (verzenden)",
+ "useSIP": "SIP-service gebruiken",
+ "writeCalendar": "Agenda (schrijven)",
+ "writeCallLog": "Gesprekgeschiedenis (schrijven)",
+ "writeContacts": "Contactpersonen (schrijven)",
+ "writeExternalStorage": "Externe opslag (schrijven)"
+ },
+ "RemoveDialog": {
+ "description": "Weet u zeker dat u de machtiging wilt verwijderen?",
+ "title": "Verwijderen"
+ },
+ "TableHeader": {
+ "permission": "Machtiging",
+ "permissionGroup": "Machtigingsgroep",
+ "permissionName": "Naam machtiging",
+ "permissionState": "Machtigingsstatus"
+ },
+ "addButtonLabel": "+Toevoegen",
+ "addPermissionTableDescription": "Geef machtigingen op die u wilt overschrijven. Als de machtigingen niet gekozen/expliciet opgegeven zijn, is het standaardgedrag van toepassing.",
+ "addPermissionsTitle": "Machtigingen toevoegen",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Meer informatie over machtigingen voor Android runtime",
+ "permissionTableDescription": "De verleende machtigingen overschrijven het beleid Standaardapp-machtigingen voor de geselecteerde apps.",
+ "permissionsTitle": "Machtigingen"
+ },
+ "AssignmentAction": {
+ "exclude": "Uitgesloten",
+ "include": "Inbegrepen",
+ "includeAllDevicesVirtualGroup": "Inbegrepen",
+ "includeAllUsersVirtualGroup": "Inbegrepen"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search als standaard",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype voor Bedrijven",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "Het bestand of de map als de geselecteerde vereiste.",
+ "pathToolTip": "Het volledige pad van het bestand of de map die u wilt detecteren.",
+ "property": "Eigenschap",
+ "valueToolTip": "Selecteer een waarde voor de vereiste die overeenkomt met de geselecteerde detectiemethode. Een vereiste voor datum en tijd moet u in de lokale tijdnotatie invoeren."
+ },
+ "GridColumns": {
+ "pathOrScript": "Pad/script",
+ "type": "Type"
+ },
+ "Registry": {
+ "keyPath": "Sleutelpad",
+ "keyPathTooltip": "Het volledige pad van de registervermelding die de waarde als vereiste bevat.",
+ "operator": "Operator",
+ "operatorTooltip": "Selecteer de operator voor de vergelijking.",
+ "registryRequirement": "Vereiste voor registersleutel",
+ "registryRequirementTooltip": "Selecteer de vergelijking van de vereiste voor de registersleutel.",
+ "valueName": "Waardenaam",
+ "valueNameTooltip": "De naam van de vereiste registerwaarde."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Bestand",
+ "registry": "Register",
+ "script": "Script"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Booleaans",
+ "dateTime": "Datum en tijd",
+ "float": "Drijvende komma",
+ "integer": "Geheel getal",
+ "string": "Tekenreeks",
+ "version": "Versie"
+ },
+ "duplicateName": "De scriptnaam {0} is al gebruikt. Voer een andere naam in.",
+ "enforceSignatureCheck": "Controle van scripthandtekening afdwingen",
+ "enforceSignatureCheckTooltip": "Selecteer Ja om op te geven dat het script is ondertekend door een vertrouwde uitgever. Hierdoor kan het script zonder waarschuwingen of prompts worden uitgevoerd. Het script wordt niet geblokkeerd en wordt uitgevoerd. Selecteer Nee (standaardwaarde) om het script met bevestiging door de eindgebruiker maar zonder handtekeningverificatie uit te voeren.",
+ "loggedOnCredentials": "Dit script uitvoeren met referenties van aangemelde gebruiker",
+ "loggedOnCredentialsTooltip": "Het script uitvoeren met de referenties van het aangemelde apparaat.",
+ "operatorTooltip": "Selecteer de operator voor de vergelijking van vereisten.",
+ "requirementMethod": "Uitvoergegevenstype selecteren",
+ "requirementMethodTooltip": "Selecteer het gegevenstype dat wordt gebruikt bij het bepalen van een vereiste voor detectieovereenkomsten.",
+ "scriptContent": "Scriptinhoud",
+ "scriptFile": "Scriptbestand",
+ "scriptFileTooltip": "Selecteer een PowerShell-script waarmee de aanwezigheid van een app op de client wordt gedetecteerd. Als de app wordt gedetecteerd, wordt met het proces van de vereist een afsluitcode met de waarde 0 geretourneerd en een tekenreekswaarde naar STDOUT geschreven.",
+ "scriptName": "Scriptnaam",
+ "value": "Waarde",
+ "valueTooltip": "Selecteer een waarde voor de vereiste die overeenkomt met de geselecteerde detectiemethode. Een vereiste voor datum en tijd moet u in de lokale tijdnotatie invoeren."
+ },
+ "bladeTitle": "Een vereisteregel toevoegen",
+ "createRequirementHeader": "Maak een vereiste.",
+ "header": "Aanvullende vereisteregels configureren",
+ "label": "Aanvullende vereistenregels",
+ "noRequirementsSelectedPlaceholder": "Er zijn geen vereisten opgegeven.",
+ "requirementType": "Vereistetype",
+ "requirementTypeTooltip": "Kies het type detectiemethode dat wordt gebruikt om te bepalen hoe een vereiste wordt gevalideerd."
+ },
+ "architectures": "Architectuur van besturingssysteem",
+ "architecturesTooltip": "Kies de architecturen die nodig zijn voor het installeren van de app.",
+ "bladeTitle": "Vereisten",
+ "diskSpace": "Vereiste schijfruimte (MB)",
+ "diskSpaceTooltip": "Vrije schijfruimte die nodig is op het systeemstation voor het installeren van de app.",
+ "header": "Geef de vereisten op waaraan apparaten moeten voldoen voordat de app wordt geïnstalleerd:",
+ "maximumTextFieldValue": "De waarde mag maximaal {0} zijn.",
+ "minimumCpuSpeed": "Minimale vereiste processorsnelheid (MHz)",
+ "minimumCpuSpeedTooltip": "De minimale processorsnelheid die is vereist om de app te installeren.",
+ "minimumLogicalProcessors": "Minimale aantal vereiste logische processors",
+ "minimumLogicalProcessorsTooltip": "Het minimale aantal logische processors dat is vereist om de app te installeren.",
+ "minimumOperatingSystem": "Minimumversie van het besturingssysteem",
+ "minimumOperatingSystemTooltip": "Selecteer de minimumversie van het besturingssysteem die nodig is voor het installeren van de app.",
+ "minumumTextFieldValue": "De waarde moet ten minste {0} zijn.",
+ "physicalMemory": "Vereiste fysieke geheugen (MB)",
+ "physicalMemoryTooltip": "Fysieke geheugen (RAM) dat is vereist om de app te installeren.",
+ "selectorLabel": "Vereisten",
+ "validNumber": "Voer een geldig getal in"
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filter",
+ "assignmentFilterTypeColumnHeader": "Filtermodus",
+ "assignmentToast": "Meldingen van eindgebruiker",
+ "assignmentTypeTableHeader": "TOEWIJZINGSTYPE",
+ "autoUpdate": "Automatisch bijwerken",
+ "deadlineTimeColumnLabel": "Installatiedeadline",
+ "deliveryOptimizationPriorityHeader": "Delivery Optimization-prioriteit",
+ "groupTableHeader": "Groep",
+ "installContextLabel": "Context installeren",
+ "isRemovable": "Installeren als verwisselbaar",
+ "licenseTypeLabel": "Licentietype",
+ "modeTableHeader": "Groepsmodus",
+ "policySet": "Beleidsset",
+ "preventAutoAppUpdate": "Automatische app-updates voorkomen",
+ "preventManagedAppBackup": "Back-up van iCloud-app voorkomen",
+ "restartGracePeriodHeader": "Respijtperiode voor opnieuw opstarten",
+ "startTimeColumnLabel": "Beschikbaarheid",
+ "tracks": "Tracks",
+ "uninstallOnRemoval": "Verwijderen bij verwijdering van apparaat",
+ "updateMode": "Updateprioriteit",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD-web-app",
+ "androidEnterpriseSystemApp": "Android Enterprise-systeem-app",
+ "androidForWorkApp": "Beheerde Google Play Store-app",
+ "androidLobApp": "Line-Of-Business-app voor Android",
+ "androidStoreApp": "Android Store-app",
+ "builtInAndroid": "Ingebouwde Android-app",
+ "builtInApp": "Ingebouwde app",
+ "builtInIos": "Ingebouwde iOS-app",
+ "iosIPadOSWebClip": "iOS/iPadOS-webclip",
+ "iosLobApp": "Line-Of-Business-app voor iOS",
+ "iosStoreApp": "iOS Store-app",
+ "iosVppApp": "Volume Purchase Program-app voor iOS",
+ "lineOfBusinessApp": "Line-Of-Business-app",
+ "macOSDmgApp": "macOS-app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Line-Of-Business-app voor macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office-suite",
+ "macOSPkgApp": "macOS-app (PKG)",
+ "macOSWebClip": "Webclip voor macOS",
+ "macOsVppApp": "Volume Purchase Program-app voor macOS",
+ "managedAndroidLobApp": "Beheerde Line-Of-Business-app voor Android",
+ "managedAndroidStoreApp": "Beheerde Android Store-app",
+ "managedGooglePlayApp": "Beheerde Google Play Store-app",
+ "managedGooglePlayPrivateApp": "Persoonlijke beheerde Google Play-app",
+ "managedGooglePlayWebApp": "Webkoppeling voor beheerde Google Play",
+ "managedIosLobApp": "Beheerde Line-Of-Business-app voor iOS",
+ "managedIosStoreApp": "Beheerde iOS Store-app",
+ "microsoftStoreForBusinessApp": "Microsoft Store voor Bedrijven-app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store voor Bedrijven",
+ "officeAddIn": "Office-invoegtoepassing",
+ "officeSuiteApp": "Microsoft 365-apps (Windows 10 en hoger)",
+ "sharePointApp": "SharePoint-app",
+ "teamsApp": "Teams-app",
+ "webApp": "Webkoppeling",
+ "win32CatalogApp": "Windows-catalogus-app (Win32)",
+ "winGetPublicApp": "Opslagplaats van de community van Windows-pakketbeheerder",
+ "winGetStoreApp": "Microsoft Store-app (nieuw)",
+ "windowsAppXLobApp": "AppX Line-Of-Business-app voor Windows",
+ "windowsClassicApp": "Windows-app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 en hoger)",
+ "windowsMobileMsiLobApp": "MSI Line-Of-Business-app voor Windows",
+ "windowsPhone81AppXBundleLobApp": "AppX Line-Of-Business-app voor Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "AppX Line-Of-Business-app voor Windows Phone 8.1",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 Store-app",
+ "windowsPhoneXapLobApp": "XAP Line-Of-Business-app voor Windows Phone",
+ "windowsStoreApp": "Microsoft Store-app (verouderd)",
+ "windowsUniversalAppXLobApp": "Universele AppX Line-Of-Business-app voor Windows",
+ "windowsUniversalLobApp": "Universele Line-Of-Business-app voor Windows",
+ "windowsWebApp": "Windows-webkoppeling"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Uitgesloten",
+ "include": "Inbegrepen",
+ "includeAllDevicesVirtualGroup": "Inbegrepen",
+ "includeAllUsersVirtualGroup": "Inbegrepen"
+ },
+ "AssignmentToast": {
+ "hideAll": "Alle pop-upmeldingen verbergen",
+ "showAll": "Alle pop-upmeldingen weergeven",
+ "showReboot": "Pop-upmeldingen voor de computer opnieuw opstarten weergeven"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Ja",
+ "notConfigured": "Nee"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Achtergrond",
+ "displayText": "Inhoud downloaden in {0}",
+ "foreground": "Voorgrond",
+ "header": "Delivery Optimization-prioriteit"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Na installatie van de app kan opnieuw opstarten van het apparaat worden afgedwongen",
+ "basedOnReturnCode": "Bepaal bedrag op basis van retourcodes",
+ "force": "Via Intune wordt opnieuw opstarten van het apparaat afgedwongen",
+ "suppress": "Geen specifieke actie"
+ },
+ "FilterType": {
+ "exclude": "Uitsluiten",
+ "include": "Opnemen",
+ "none": "Geen"
+ },
+ "InstallIntent": {
+ "available": "Beschikbaar voor ingeschreven apparaten",
+ "availableWithoutEnrollment": "Beschikbaar met of zonder inschrijving",
+ "notApplicable": "Niet van toepassing",
+ "required": "Vereist",
+ "uninstall": "Verwijderen"
+ },
+ "SettingType": {
+ "assignmentType": "Toewijzingstype",
+ "deviceLicensing": "Licentietype",
+ "installContext": "Verwijderen bij verwijdering van apparaat",
+ "toastSettings": "Meldingen van eindgebruiker",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Standaard",
+ "postponed": "Uitgesteld",
+ "priority": "Hoge prioriteit"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Mislukt",
+ "hardReboot": "Hard opstarten",
+ "retry": "Opnieuw",
+ "softReboot": "Zacht opstarten",
+ "success": "Geslaagd"
+ },
+ "Columns": {
+ "codeType": "Codetype",
+ "returnCode": "Retourcode"
+ },
+ "bladeTitle": "Retourcodes",
+ "gridAriaLabel": "Retourcodes",
+ "header": "Geef de retourcodes op het gedrag na installatie op te geven:",
+ "onAddAnnounceMessage": "Item {0} van {1} met toegevoegde code retourneren",
+ "onDeleteSuccess": "De retourcode is {0} verwijderd",
+ "returnCodeAlreadyUsedValidation": "De retourcode wordt al gebruikt.",
+ "returnCodeMustBeIntegerValidation": "De retourcode moet een geheel getal zijn.",
+ "returnCodeShouldBeAtLeast": "De retourcode moet ten minste {0} zijn.",
+ "returnCodeShouldBeAtMost": "De retourcode mag maximaal {0} zijn.",
+ "selectorLabel": "Retourcodes"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone en iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Netwerkgrens toevoegen",
+ "addNetworkBoundaryButton": "Netwerkgrens toevoegen...",
+ "allowWindowsSearch": "Toestaan dat Windows Search versleutelde bedrijfsgegevens en Store-apps doorzoekt",
+ "authoritativeIpRanges": "De lijst IP-bereiken van ondernemingen is bindend (geen automatische detectie toepassen)",
+ "authoritativeProxyServers": "De lijst Proxyservers van onderneming is bindend (geen automatische detectie toepassen)",
+ "boundaryType": "Grenstype",
+ "cloudResources": "Cloudresources",
+ "corporateIdentity": "Bedrijfsidentiteit",
+ "dataRecoveryCert": "Een DRA-certificaat (Data Recovery Agent) uploaden zodat versleutelde gegevens kunnen worden hersteld",
+ "editNetworkBoundary": "Netwerkgrens bewerken",
+ "enrollmentState": "Inschrijvingsstatus",
+ "iPv4Ranges": "IPv4-bereiken",
+ "iPv6Ranges": "IPv6-bereiken",
+ "internalProxyServers": "Interne proxyservers",
+ "maxInactivityTime": "De maximale hoeveelheid tijd (in minuten) die het apparaat niet-actief mag zijn voordat het apparaat wordt vergrendeld met een pincode of wachtwoord",
+ "maxPasswordAttempts": "Het aantal toegestane mislukte authenticaties voordat een apparaat wordt gewist",
+ "mdmDiscoveryUrl": "Detectie-URL voor MDM",
+ "mdmRequiredSettingsInfo": "Dit beleid is alleen van toepassing op Windows 10 Anniversary Edition en hoger. Met dit beleid word gebruikgemaakt van Windows Information Protection (WIP) voor beveiliging.",
+ "minimumPinLength": "Het minimum aantal tekens instellen dat is vereist voor de pincode",
+ "name": "Naam",
+ "networkBoundariesGridEmptyText": "De netwerkgrenzen die u hebt toegevoegd, worden hier weergegeven",
+ "networkBoundary": "De grens van het netwerk",
+ "networkDomainNames": "Netwerkdomeinen",
+ "neutralResources": "Neutrale resources",
+ "passportForWork": "Windows Hello voor Bedrijven gebruiken als methode om u aan te melden bij Windows",
+ "pinExpiration": "Opgeven gedurende welke periode (in dagen) een pincode mag worden gebruikt voordat de gebruiker deze van het systeem moet wijzigen",
+ "pinHistory": "Het aantal oude pincodes dat kan worden toegewezen aan een gebruikersaccount opgeven die niet opnieuw kunnen worden gebruikt.",
+ "pinLowercaseLetters": "Het gebruik van kleine letters in de pincode voor Windows Hello voor Bedrijven configureren",
+ "pinSpecialCharacters": "Het gebruik van speciale tekens in de pincode voor Windows Hello voor Bedrijven configureren",
+ "pinUppercaseLetters": "Het gebruik van hoofdletters in de pincode voor Windows Hello voor Bedrijven configureren",
+ "protectUnderLock": "Voorkomen dat bedrijfsgegevens toegankelijk zijn via apps wanneer het apparaat is vergrendeld. Dit is alleen van toepassing op Windows 10 Mobile",
+ "protectedDomainNames": "Beveiligde domeinen",
+ "proxyServers": "Proxyservers",
+ "requireAppPin": "App-pincode uitschakelen wanneer de pincode van het apparaat wordt beheerd",
+ "requiredSettings": "Verplichte instellingen",
+ "requiredSettingsInfo": "Als u het bereik wijzigt of dit beleid verwijdert, worden de bedrijfsgegevens ontsleuteld.",
+ "revokeOnMdmHandoff": "Toegang tot beveiligde gegevens intrekken wanneer het apparaat wordt ingeschreven bij MDM",
+ "revokeOnUnenroll": "Versleutelingssleutels intrekken bij het ongedaan maken van de registratie",
+ "rmsTemplateForEdp": "De sjabloon-id opgeven die moet worden gebruikt voor Azure RMS",
+ "showWipIcon": "Het pictogram voor ondernemingsgegevensbescherming weergeven",
+ "type": "Type",
+ "useRmsForWip": "Azure RMS voor WIP gebruiken",
+ "value": "Waarde",
+ "weRequiredSettingsInfo": "Dit beleid is alleen van toepassing op Windows 10-makersupdate en hoger. Met dit beleid word gebruikgemaakt van Windows Information Protection (WIP) en Windows MAM voor beveiliging.",
+ "wipProtectionMode": "Modus Windows Information Protection",
+ "withEnrollment": "Met inschrijving",
+ "withoutEnrollment": "Zonder inschrijving"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabisch",
+ "bulgarian": "Bulgaars",
+ "chineseSimplified": "Chinees (Vereenvoudigd)",
+ "chineseTraditional": "Chinees (Traditioneel)",
+ "croatian": "Kroatisch",
+ "czech": "Tsjechisch",
+ "danish": "Deens",
+ "dutch": "Nederlands",
+ "englishUK": "Engels (Verenigd Koninkrijk)",
+ "englishUS": "Engels (Verenigde Staten)",
+ "estonian": "Ests",
+ "finnish": "Fins",
+ "frenchCanada": "Frans (Canada)",
+ "frenchFrance": "Frans (Frankrijk)",
+ "german": "Duits",
+ "greek": "Grieks",
+ "hebrew": "Hebreeuws",
+ "hungarian": "Hongaars",
+ "italian": "Italiaans",
+ "japanese": "Japans",
+ "korean": "Koreaans",
+ "latvian": "Lets",
+ "lithuanian": "Litouws",
+ "norwegian": "Noors (Bokmål)",
+ "polish": "Pools",
+ "portugueseBrazil": "Portugees (Brazilië)",
+ "portuguesePortugal": "Portugees (Portugal)",
+ "romanian": "Roemeens",
+ "russian": "Russisch",
+ "serbian": "Servisch",
+ "slovak": "Slowaaks",
+ "slovenian": "Sloveens",
+ "spanishMexico": "Spaans (Mexico)",
+ "spanishSpain": "Spaans (Spanje)",
+ "swedish": "Zweeds",
+ "thai": "Thailand",
+ "turkish": "Turks",
+ "ukrainian": "Oekraïens"
+ },
+ "Summary": {
+ "placeholder": "Selecteer aan de linkerkant een meldingsbericht om een voorbeeld van de inhoud te bekijken."
+ },
+ "companyContact": "Contactgegevens weergeven",
+ "companyLogo": "Bedrijfslogo weergeven",
+ "companyName": "Bedrijfsnaam weergeven",
+ "createEditDescription": "Maak of bewerk meldingsberichtsjablonen.",
+ "createMessage": "Bericht maken",
+ "deviceDetails": "Apparaatgegevens weergeven",
+ "deviceDetailsInfoBox": "Deze instelling is standaard uitgeschakeld, omdat het ophalen van apparaatgegevens kan leiden tot een vertraging bij het ontvangen van e-mailmeldingen.",
+ "editImpactInfo": "Als u deze sjabloon voor meldingsberichten bewerkt, heeft dit gevolgen voor alle beleidsregels die de sjabloon gebruiken.",
+ "editMessage": "Bericht bewerken",
+ "email": "e-mail",
+ "emailFooterTitle": "Voettekst van e-mail",
+ "emailHeaderFooterInfo": "Instellingen voor kop- en voetteksten voor e-mailmeldingen zijn afhankelijk van aanpassingsinstellingen binnen het tenantbeheerknooppunt in Endpoint Manager.",
+ "emailHeaderTitle": "Koptekst van e-mail",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Aanpassingsinstellingen configureren",
+ "formSubTitle": "E-mailmeldingen maken of wijzigen",
+ "headerFooterSettingsTab": "Instellingen voor koptekst en voettekst",
+ "imgPreview": "Voorbeeld van afbeelding",
+ "infotext": "Selecteer een meldingsbericht. Ga naar Meldingen in het gedeelte Beheer van de workload Apparaatcompatibiliteit instellen om een nieuwe melding te maken.",
+ "iwLink": "Koppeling naar bedrijfsportalwebsite weergeven",
+ "listEmpty": "Er zijn geen berichtsjablonen.",
+ "listEmptySelectOnly": "Er zijn geen berichtsjablonen. Ga naar Meldingen in het gedeelte Beheer van de workload Apparaatcompatibiliteit instellen om een nieuwe melding te maken.",
+ "listSubTitle": "Lijst met sjablonen voor meldingsberichten",
+ "listTitle": "Meldingsberichtsjablonen",
+ "localizedNotificationMessageTemplates": "Gelokaliseerde sjablonen voor meldingsberichten",
+ "messageAssigned": "Kan de berichtsjabloon niet verwijderen omdat deze momenteel wordt gebruikt door een of meer beleidsregels voor naleving.",
+ "messageCapitalized": "Meldingsberichtsjabloon",
+ "messageLowercase": "meldingsberichtsjabloon",
+ "missingDefaultError": "Een standaardsjabloon selecteren",
+ "notificationMessageTemplates": "Meldingsberichtsjablonen",
+ "rowValidationError": "Er is minimaal één berichtsjabloon vereist",
+ "selectDescription": "Selecteer een meldingsbericht. Ga naar Meldingen in het gedeelte Beheer van de workload Apparaatcompatibiliteit instellen om een nieuwe melding te maken.",
+ "tenantValueText": "Tenantwaarde",
+ "testEmailLabel": "Een voorbeeld van het e-mailbericht verzenden",
+ "localeLabel": "Landinstellingen",
+ "isDefaultLocale": "Is standaard"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Configureer apparaten voor de eerste inrichting.",
+ "title": "Apparaatvoorbereiding"
+ },
+ "EnrollmentSettings": {
+ "description": "Inschrijvingsinstellingen configureren, zoals het blokkeren van de inschrijving en toewijzen aan gebruikers.",
+ "title": "Inschrijvingsinstellingen"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Configureer instellingen waarmee gebruikers Windows kunnen herstellen van een opstartbaar flashstation.",
+ "menuTitle": "Herstelconfiguratie van Windows-besturingssysteem"
+ },
+ "coManagementAuthorityDesc": "Co-beheerinstellingen configureren voor Configuration Manager-integratie",
+ "coManagementAuthorityTitle": "Instellingen voor co-beheer ",
+ "deploymentProfiles": "Windows AutoPilot-implementatieprofielen",
+ "description": "Meer informatie over de zeven verschillende manieren waarop een Windows 10/11-pc kan worden ingeschreven bij Intune door gebruikers of beheerders.",
+ "descriptionLabel": "Windows-inschrijvingsmethoden",
+ "enrollmentStatusPage": "Pagina Status van de inschrijving"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Selecteer het aantal bits dat in de sleutel is opgenomen.",
+ "keyUsage": "Geef de cryptografische actie op die nodig is voor het uitwisselen van de openbare sleutel van het certificaat.",
+ "renewalThreshold": "Geef het percentage (tussen 1 en 99 procent) op van de resterende levensduur van het certificaat dat is toegestaan voordat een apparaat vernieuwing van het certificaat kan aanvragen. De aanbevolen waarde voor Intune is 20%. (1-99)",
+ "rootCert": "Kies een eerder geconfigureerd en toegewezen certificaatprofiel van een basis-CA. Het CA-certificaat moet overeenkomen met het basiscertificaat van de CA die het certificaat verleent voor dit profiel (hetgeen u momenteel configureert).",
+ "scepServerUrl": "Voer een URL in voor de NDES-server waarmee certificaten worden uitgegeven via SCEP (moet HTTPS zijn), bijvoorbeeld https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Voer een of meer URL's in voor de NDES-server waarmee certificaten worden uitgegeven via SCEP (moet HTTPS zijn), bijvoorbeeld https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Alternatieve naam voor onderwerp",
+ "subjectNameFormat": "Indeling van de onderwerpnaam",
+ "validityPeriod": "De resterende tijd voordat het certificaat verloopt. Voer een waarde in die gelijk is aan of lager is dan de geldigheidsperiode die wordt weergegeven in de certificaatsjabloon. Is standaard ingesteld op een jaar."
+ },
+ "appInstallContext": "Hiermee bepaalt u de installatiecontext die moet worden gekoppeld aan deze app. Selecteer de gewenste context apps met dubbele modus. Voor alle andere toepassingen wordt dit vooraf geselecteerd op basis van het pakket; dit kan niet worden gewijzigd.",
+ "autoUpdateMode": "Configureer de updateprioriteit voor de app. Selecteer Standaard om te vereisen dat het apparaat is verbonden met Wi-Fi, dat deze opgeladen wordt en niet actief wordt gebruikt voordat u de app bijwerkt. Selecteer Hoge prioriteit om de app bij te werken zodra de ontwikkelaar de app heeft gepubliceerd, ongeacht oplaadstatus, Wi-Fi-mogelijkheden of activiteiten van eindgebruikers op het apparaat. Selecteer Uitgesteld om af te zien van app-updates voor maximaal 90 dagen. Hoge prioriteit en Uitgesteld worden alleen van kracht op DO-apparaten.",
+ "configurationSettingsFormat": "Tekstopmaak van de configuratie-instellingen",
+ "ignoreVersionDetection": "Stel dit in op Yes voor toepassingen die automatisch worden bijgewerkt door de app-ontwikkelaar (zoals Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Selecteer Ja voor apps die automatisch worden bijgewerkt door de app-ontwikkelaar of om alleen te controleren op app-bundleID voor de installatie. Selecteer Nee om te controleren op app-bundleID en versienummer vóór de installatie.",
+ "installAsManagedMacOSLobApp": "Deze instelling is alleen van toepassing op macOS 11 en hoger. De app wordt geïnstalleerd, maar wordt niet beheerd op macOS 10.15 en lager.",
+ "installContextDropdown": "Selecteer de juiste installatiecontext. In de gebruikerscontext wordt de app alleen geïnstalleerd voor de gebruiker waarop de app is gericht; in de apparaatcontext wordt de app voor alle gebruikers op het apparaat geïnstalleerd.",
+ "ldapUrl": "Dit is de LDAP-hostnaam waar clients openbare versleutelingssleutels kunnen downloaden voor e-mailontvangers. E-mailberichten worden versleuteld als er een sleutel beschikbaar is. Ondersteunde indelingen:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Selecteer runtime-machtigingen voor de bijbehorende app.",
+ "policyAssociatedApp": "Selecteer de app waaraan dit beleid wordt gekoppeld.",
+ "policyConfigurationSettings": "Selecteer de methode die u wilt gebruiken om de configuratie-instellingen van dit beleid te definiëren.",
+ "policyDescription": "U kunt optioneel een beschrijving van dit configuratiebeleid invoeren.",
+ "policyEnrollmentType": "Kies of deze instellingen worden beheerd via apparaatbeheer of via apps die zijn gemaakt met Intune SDK.",
+ "policyName": "Voer een naam voor dit configuratiebeleid in.",
+ "policyPlatform": "Selecteer het platform waarop dit app-configuratiebeleid van toepassing is.",
+ "policyProfileType": "Selecteer de apparaatprofieltypen waarop dit app-configuratieprofiel van toepassing is",
+ "policySMime": "S/MIME-ondertekening en versleutelingsinstellingen voor Outlook configureren.",
+ "sMimeDeployCertsFromIntune": "Opgeven of er S/MIME-certificaten worden geleverd via Intune voor gebruik met Outlook.\r\nMet Intune kunnen certificaten voor ondertekening en versleuteling automatisch voor gebruikers worden geïmplementeerd via de bedrijfsportal.",
+ "sMimeEnable": "Opgeven of S/MIME-besturingselementen zijn ingeschakeld bij het opstellen van een e-mailbericht",
+ "sMimeEnableAllowChange": "Geef aan of de gebruiker de instelling S/MIME inschakelen mag wijzigen.",
+ "sMimeEncryptAllEmails": "Opgeven of alle e-mailberichten moeten worden versleuteld.\r\nTijdens de versleuteling worden gegevens met een coderingstekst geconverteerd zodat alleen de beoogde ontvanger het e-mailbericht kan lezen.",
+ "sMimeEncryptAllEmailsAllowChange": "Geef aan of de gebruiker de instelling Alle e-mailberichten versleutelen mag wijzigen.",
+ "sMimeEncryptionCertProfile": "Certificaatprofiel voor versleuteling van e-mails opgeven.",
+ "sMimeSignAllEmails": "Opgeven of alle e-mailberichten moeten worden ondertekend.\r\nMet een digitale handtekening wordt de echtheid van het e-mailbericht gecontroleerd om ervoor te zorgen dat de inhoud niet onrechtmatig kan worden gewijzigd tijdens de overdracht.",
+ "sMimeSignAllEmailsAllowChange": "Geef aan of de gebruiker de instelling Alle e-mails ondertekenen mag wijzigen.",
+ "sMimeSigningCertProfile": "Certificaatprofiel voor het ondertekenen van e-mails opgeven.",
+ "sMimeUserNotificationType": "De methode waarmee gebruikers worden geïnformeerd dat ze de bedrijfsportal moeten openen om S/MIME-certificaten voor Outlook op te halen."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} maakt deel uit van een of meer beleidssets. Als u {0} verwijdert, kunt u deze niet langer toewijzen via deze beleidssets. Wilt u toch verwijderen?",
+ "contentWithError": "{0} maakt mogelijk deel uit van een of meer beleidssets. Als u {0} verwijdert, kunt u deze niet langer toewijzen via deze beleidssets. Wilt u toch verwijderen?",
+ "header": "Weet u zeker dat u deze beperking wilt verwijderen?"
+ },
+ "DeviceLimit": {
+ "description": "Geef het maximum aantal apparaten op dat een gebruiker kan registreren.",
+ "header": "Beperkingen voor apparaatlimieten",
+ "info": "Hiermee geeft u op hoeveel apparaten elke gebruiker kan registreren."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Moet 1,0 of hoger zijn.",
+ "android": "Voer een geldig versienummer in. Voorbeelden: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Voer een geldig versienummer in. Voorbeelden: 5.0, 5.1.1",
+ "iOS": "Voer een geldig versienummer in. Voorbeelden: 9.0, 10.0, 9.0.2",
+ "mac": "Voer een geldig versienummer in. Voorbeelden: 10, 10.10, 10.10.1",
+ "min": "De minimumwaarde mag niet lager zijn dan {0}",
+ "minMax": "De minimale versie mag niet groter zijn dan de maximale versie.",
+ "windows": "Moet 10.0 of hoger zijn. Laat dit leeg als u ook 8.1-apparaten wilt toestaan.",
+ "windowsMobile": "Moet 10.0 of hoger zijn. Laat dit leeg als u ook 8.1-apparaten wilt toestaan."
+ },
+ "allPlatformsBlocked": "Alle apparaatplatformen zijn geblokkeerd. Sta platforminschrijving toe om platformconfiguratie in te schakelen.",
+ "blockManufacturerPlaceHolder": "Naam van fabrikant",
+ "blockManufacturersHeader": "Geblokkeerde fabrikanten",
+ "cannotRestrict": "De beperking wordt niet ondersteund",
+ "configurationDescription": "Hiermee geeft u de configuratiebeperkingen voor het platform op waaraan een apparaat moet voldoen om te kunnen worden geregistreerd. Gebruik regels voor nalevingsbeleid om apparaten na de registratie te beperken. Geef versies als major.minor.build op. Versiebeperkingen zijn alleen van toepassing op apparaten die zijn geregistreerd bij de bedrijfsportal. Apparaten worden in Intune standaard geclassificeerd als persoonlijke apparaten. Er is aanvullende actie vereist als u apparaten wilt classificeren als apparaten in bedrijfseigendom.",
+ "configurationDescriptionLabel": "Meer informatie over het instellen van inschrijvingsbeperkingen",
+ "configurations": "Platformen configureren",
+ "deviceManufacturer": "Fabrikant van apparaat",
+ "header": "Beperkingen voor apparaattypen",
+ "info": "Hiermee geeft u op welke platformen, besturingssysteemversies en eigendomstypen kunnen worden geregistreerd.",
+ "manufacturer": "Fabrikant",
+ "max": "Max.",
+ "maxVersion": "Maximumversie",
+ "min": "Min",
+ "minVersion": "Minimumversie",
+ "newPlatforms": "U hebt nieuwe platformen toegestaan. Werk de platformconfiguraties bij.",
+ "personal": "Persoonlijk eigendom",
+ "platform": "Platform",
+ "platformDescription": "U kunt de volgende platformen inschrijven. Blokkeer alleen platformen die u niet ondersteunt. Toegestane platformen kunnen worden geconfigureerd met aanvullende inschrijvingsbeperkingen.",
+ "platformSettings": "Platforminstellingen",
+ "platforms": "Platformen selecteren",
+ "platformsSelected": "{0} platformen geselecteerd",
+ "type": "Type",
+ "versions": "versies",
+ "versionsRange": "Min/max bereik toestaan:",
+ "windowsTooltip": "Hiermee beperkt u de inschrijving via Mobile Device Management. De installatie van de pc-agent wordt niet beperkt. Alleen Windows 10- en Windows 11-versies worden ondersteund. Laat dit leeg als u Windows 8.1 wilt toestaan."
+ },
+ "Priority": {
+ "saved": "De prioriteiten van de beperking zijn opgeslagen."
+ },
+ "Row": {
+ "announce": "Prioriteit: {0}, naam: {1}, toegewezen: {2}"
+ },
+ "Table": {
+ "deployed": "Geïmplementeerd",
+ "name": "Naam",
+ "priority": "Prioriteit"
+ },
+ "Type": {
+ "limit": "Beperking voor apparaatlimiet",
+ "type": "Beperking voor apparaattype"
+ },
+ "allUsers": "Alle gebruikers",
+ "androidRestrictions": "Android-beperkingen",
+ "create": "Beperking maken",
+ "defaultLimitDescription": "Dit is de standaardlimietbeperking voor apparaten die met de laagste prioriteit wordt toegepast op alle gebruikers, ongeacht hun groepslidmaatschap.",
+ "defaultTypeDescription": "Dit is de standaardtypebeperking voor apparaten die met de laagste prioriteit wordt toegepast op alle gebruikers, ongeacht hun groepslidmaatschap.",
+ "defaultWhfbDescription": "Dit is de standaardconfiguratie voor typebeperking voor Windows Hello voor Bedrijven die met de laagste prioriteit wordt toegepast op alle gebruikers, ongeacht hun groepslidmaatschap.",
+ "deleteMessage": "Betrokken gebruikers worden beperkt door de toegewezen beperking van het volgende niveau of door de standaardbeperking als er geen andere beperking is toegewezen.",
+ "deleteTitle": "Weet u zeker dat u de beperking {0} wilt verwijderen?",
+ "descriptionHint": "Korte alinea met een beschrijving van het zakelijke gebruik of het beperkingsniveau op basis van de instellingen van de beperking.",
+ "edit": "Beperking bewerken",
+ "info": "Een apparaat moet voldoen aan de beperkingen met hoogste prioriteit voor inschrijving die zijn toegewezen aan de gebruiker. U kunt een apparaatbeperking slepen om de prioriteit te wijzigen. Standaardbeperkingen hebben de laagste prioriteit voor alle gebruikers en zijn van toepassing op inschrijvingen zonder gebruiker. Standaardbeperkingen kunnen worden bewerkt, maar niet verwijderd.",
+ "iosRestrictions": "iOS-beperkingen",
+ "mDM": "MDM",
+ "macRestrictions": "macOS-beperkingen",
+ "maxVersion": "Maximale versie",
+ "minVersion": "Minimale versie",
+ "nameHint": "Dit is het primaire kenmerk dat zichtbaar is voor de identificatie van de ingestelde beperking.",
+ "noAssignmentsStatusBar": "Wijs de beperking toe aan minimaal één groep. Klik op Eigenschappen.",
+ "nonAdminForbiddenCreateError": "U moet een Intune-service of globale beheerder zijn om beperkingen te kunnen maken, bewerken of verwijderen.",
+ "nonAdminForbiddenEdit": "U moet een beheerder zijn om beperkingen te bewerken.",
+ "notFound": "Beperking niet gevonden. Het is mogelijk al verwijderd.",
+ "personallyOwned": "Apparaten met persoonlijke eigendom",
+ "restriction": "Beperking",
+ "restrictionLowerCase": "beperking",
+ "restrictionType": "Beperkingstype",
+ "selectType": "Beperkingstype selecteren",
+ "selectValidation": "Selecteer een platform",
+ "typeHint": "Kies Apparaattypebeperking om de apparaateigenschappen te beperken. Kies Apparaatlimietbeperking om het aantal apparaten per gebruiker te beperken.",
+ "typeRequired": "Beperkingstype is vereist.",
+ "winPhoneRestrictions": "Windows Phone-beperkingen",
+ "windowsECv1Info": "Oudere inschrijvingsbeperkingen kunnen niet worden bewerkt of een nieuwe prioriteit krijgen. Deze kunnen alleen worden verwijderd.",
+ "windowsECv2Info": "U kunt prioriteit geven aan inschrijvingsbeperkingen door deze te slepen en neer te zetten. Bekijk de standaard- en vooraf geconfigureerde beperkingen hieronder. Alle nieuwe inschrijvingsbeperkingen hebben een hogere prioriteit dan standaard- en vooraf geconfigureerde beperkingen.",
+ "windowsRestrictions": "Windows-beperkingen",
+ "windowsRestrictionsPreview": "Windows-beperkingen op basis van filters (preview-versie)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 dag",
+ "twoDays": "2 dagen",
+ "zeroDays": "0 dagen"
+ },
+ "SecurityTemplate": {
+ "aSR": "Kwetsbaarheid voor aanvallen verminderen",
+ "accountProtection": "Accountbeveiliging",
+ "allDevices": "Alle apparaten",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Antivirusrapportage (preview)",
+ "conditionalAccess": "Voorwaardelijke toegang",
+ "deviceCompliance": "Apparaatnaleving",
+ "diskEncryption": "Schijfversleuteling",
+ "eDR": "Eindpuntdetectie en -reactie",
+ "ePM": "Beheer van eindpuntbevoegdheden",
+ "firewall": "Firewall",
+ "helpSupport": "Help en ondersteuning",
+ "setup": "Installatie",
+ "wdapt": "Microsoft Defender for Endpoint"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Configuratie voor gegevensbeveiliging"
+ },
+ "OrganizeMailByThread": {
+ "title": "E-mailberichten rangschikken op thread",
+ "tooltip": "Standaard worden e-mailconversaties in Outlook gebundeld in een weergave met gespreksthreads. Als deze instelling is uitgeschakeld, wordt elk e-mailbericht in Outlook afzonderlijk weergegeven en worden berichten niet op thread gegroepeerd."
+ },
+ "Sync": {
+ "header": "Contactvelden synchroniseren naar de configuratie van de app voor native contactpersonen"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
+ "allowBiometricsTitle": "Biometrie vereisen voor toegang tot de app",
+ "allowBiometricsTooltip": "Functies voor biometrie, bijvoorbeeld Touch ID of Face ID, kunnen worden vereist voor gebruikers om toegang te krijgen tot de app op hun apparaat. Indien nodig wordt biometrie gebruikt naast de verificatiemethode die is geselecteerd in dit profiel. Deze instelling moet niet worden ingeschakeld wanneer beleidsregels voor Intune-app-beveiliging zijn geïmplementeerd om het beleid voor app-beveiliging toegangsvereisten omvat waaraan moet worden voldaan voordat toegang wordt verkregen tot beheerde gegevens. Als u beide inschakelt, leidt dit tot meerdere meldingen voor toegang tot Outlook Mobile. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
+ "allowCalendarNotificationsTitle": "Agendameldingen",
+ "allowCalendarNotificationsTooltip": "Toestaan dat agendameldingen volledige details weergeven als de instelling Meldingen voor organisatiegegevens van het beleid voor app-beveiliging is ingesteld op Organisatiegegevens blokkeren.",
+ "allowDefaultAppSignatureTitle": "Standaardhandtekening voor app",
+ "allowDefaultAppSignatureTooltip": "In de standaardhandtekening voor de app wordt aangegeven of de optie Outlook voor iOS downloaden als standaardhandtekening voor de app wordt gebruikt tijdens het opstellen van berichten. Als de instelling de waarde Uit heeft, wordt de standaardhandtekening niet gebruikt. Gebruikers kunnen echter wel hun eigen handtekening toevoegen. Wanneer deze instelling de waarde Niet geconfigureerd heeft, wordt de standaardinstelling voor de app ingesteld op Aan.",
+ "allowExternalRecipientsMailTipTitle": "De MailTip Externe ontvangers",
+ "allowExternalRecipientsMailTipTooltip": "De MailTip Externe ontvangers wordt weergegeven als de afzender een externe ontvanger of een distributiegroep met externe ontvangers toevoegt. Deze MailTip informeert de afzender als een bericht dat de afzender heeft opgesteld, wordt verzonden naar ontvangers buiten de organisatie. De afzender kan dan de juiste beslissingen nemen over taalgebruik, toon en inhoud. Deze MailTip is alleen beschikbaar voor on-premises en Exchange Online-accounts die gebruikmaken van hybride moderne verificatie. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Aan gebruikt.",
+ "allowFocusedInboxTitle": "Postvak IN met prioriteit",
+ "allowFocusedInboxTooltip": "Met Postvak IN met prioriteit wordt het Postvak IN gescheiden in twee tabbladen: Met prioriteit en Overige. Uw belangrijkste e-mails bevinden zich op het tabblad Met prioriteit. De rest staat binnen handbereik, maar buiten direct zicht, op het tabblad Overige. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Aan gebruikt.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
+ "allowMailNotificationsTitle": "E-mailmeldingen",
+ "allowMailNotificationsTooltip": "Met deze waarde wordt aangegeven of Outlook mailmeldingen toestaat. Als de waarde wordt ingesteld op Nee, wordt de functie voor mailmeldingen uitgeschakeld.",
+ "allowOrgDataOnWearablesTitle": "Organisatiegegevens op draagbare apparaten",
+ "allowOrgDataOnWearablesTooltip": "Met deze waarde wordt aangegeven of Outlook-gegevens kunnen worden gesynchroniseerd naar een draagbaar apparaat. Als de instelling wordt ingesteld op Nee, wordt de synchronisatie met draagbare apparaten uitgeschakeld.",
+ "allowSaveContactsAllowUserChangeTooltip": "Opgeven of de gebruiker de instelling voor synchronisatie van contactpersonen mag wijzigen.",
+ "allowSaveContactsTitle": "Contactpersonen opslaan",
+ "allowSaveContactsTooltip": "Door het opslaan van contactpersonen naar het systeemeigen adresboek van het mobiele apparaat kunnen nieuwe oproepen en sms-berichten worden gekoppeld met de bestaande Outlook-contactpersonen van de gebruiker. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
+ "allowSmartReplyTitle": "Voorgestelde antwoorden",
+ "allowSmartReplyTooltip": "Wanneer u een bericht opent, kan Outlook antwoorden voorstellen onder het bericht. Als u een voorgesteld antwoord selecteert, kunt u het antwoord bewerken voordat u het verzendt. Wanneer de instelling is de waarde Niet geconfigureerd heeft, wordt de standaard-app-instelling Aan gebruikt.",
+ "allowUserChangeGeneralToolTip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
+ "allowUserChangeTitle": "Toestaan dat de gebruiker de instelling kan wijzigen",
+ "blockExternalImagesAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
+ "blockExternalImagesTitle": "Externe afbeeldingen blokkeren",
+ "blockExternalImagesTooltip": "Als de optie Externe afbeeldingen blokkeren is ingeschakeld, voorkomt de app het downloaden van afbeeldingen die op internet worden gehost en in de berichttekst zijn ingesloten. Als de optie niet is geconfigureerd, wordt de standaard-app-instelling Uit gebruikt.",
+ "disableAddinsTitle": "Invoegtoepassingen toestaan",
+ "disableAddinsTooltip": "Een App-beveiligingsbeleid stelt gebruikers standaard in staat om invoegtoepassingen van derden te gebruiken, maar kan worden gebruikt om invoegtoepassingen te blokkeren met de instelling 'Door beleid beheerde app-gegevens synchroniseren met systeemeigen apps of invoegtoepassingen\". Als u deze instelling instelt op 'Uit', worden invoegtoepassingen geblokkeerd wanneer de instelling App-beveiligingsbeleid is ingesteld op Toegestaan.",
+ "discoverFeedTitle": "Feed detecteren",
+ "discoverFeedTooltip": "Feeds detecteren van uw meest gebruikte Office-bestanden. Deze feed is standaard ingeschakeld wanneer Delve is ingeschakeld voor de gebruiker. Wanneer de instelling niet is geconfigureerd, is de app standaard ingesteld op Aan.",
+ "enableSMIMETitle": "S/MIME inschakelen",
+ "enableSMIMETooltip": "Opgeven of S/MIME-besturingselementen zijn ingeschakeld bij het opstellen van een e-mailbericht.",
+ "encryptAllEmails": "Alle e-mailberichten versleutelen",
+ "encryptAllEmailsAllowUserChangeTooltip": "Geef aan of de gebruiker de instelling Alle e-mailberichten versleutelen mag wijzigen.",
+ "encryptAllEmailsTooltip": "Opgeven of alle e-mailberichten moeten worden versleuteld. Tijdens de versleuteling worden gegevens met een coderingstekst geconverteerd zodat alleen de beoogde ontvanger het e-mailbericht kan lezen.",
+ "ldapUrl": "LDAP-URL",
+ "ldapUrlTooltip": "Dit is de LDAP-hostnaam waar clients openbare versleutelingssleutels kunnen downloaden voor e-mailontvangers. E-mailberichten worden versleuteld als er een sleutel beschikbaar is. Ondersteunde indelingen: \r\n
\r\n
ldap.voorbeeld.com
\r\n
ldap.voorbeeld.com:123
\r\n
ldap://ldap.voorbeeld.com
\r\n
ldap://ldap.voorbeeld.com:123
\r\n
ldaps://ldap.voorbeeld.com
\r\n
ldaps://ldap.voorbeeld.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen.",
+ "nativeCalendarSyncMAMOnlyTitle": "Agendasynchronisatie toestaan",
+ "nativeCalendarSyncMAMOnlyTooltip": "In een app-beveiligingsbeleid is het synchroniseren van de agenda met de eigen agenda-app standaard toegestaan. Het beleid kan echter worden gebruikt om de beschikbaarheid van de agenda te blokkeren. Deze instelling werkt onafhankelijk van de instelling voor het app-beveiligingsbeleid en maakt het voor organisaties mogelijk om te bepalen of agendasynchronisatie beschikbaar is voor het werk- of schoolaccount.",
+ "nativeCalendarSyncTitle": "Agenda's synchroniseren",
+ "nativeCalendarSyncTooltip": "Een app-beveiligingsbeleid staat standaard synchronisatie van agenda's met de systeemeigen Agenda-app toe, maar kan worden gebruikt om de beschikbaarheid van agendasynchronisatie te blokkeren met de instelling 'Gegevens van door beleid beheerde app synchroniseren met systeemeigen apps of invoegtoepassing'. Als u deze instelling instelt op 'Uit', wordt agendasynchronisatie geblokkeerd wanneer de instelling App-beveiligingsbeleid is ingesteld op Toegestaan.",
+ "playMyEmailsTitle": "Mijn e-mailberichten afspelen",
+ "playMyEmailsTooltip": "De functie Mijn e-mailberichten afspelen is standaard niet ingeschakeld in de app, maar wordt aangeboden aan in aanmerking komende gebruikers via een banner in het Postvak IN. Wanneer deze functie is ingesteld op Uit, wordt deze niet aangeboden aan in aanmerking komende gebruikers in de app. Gebruikers kunnen ervoor kiezen Mijn e-mailberichten afspelen handmatig in te schakelen vanuit de app, zelfs wanneer deze functie is ingesteld op Uit. Als deze optie is ingesteld als Niet geconfigureerd, is de standaardinstelling voor de app Aan en wordt de functie aangeboden aan in aanmerking komende gebruikers.",
+ "signAllEmails": "Alle e-mailberichten ondertekenen",
+ "signAllEmailsAllowUserChangeTooltip": "Geef aan of de gebruiker de instelling Alle e-mailberichten ondertekenen mag wijzigen.",
+ "signAllEmailsTooltip": "Opgeven of alle e-mailberichten moeten worden ondertekend. Met een digitale handtekening wordt de echtheid van het e-mailbericht gecontroleerd om ervoor te zorgen dat de inhoud niet onrechtmatig kan worden gewijzigd tijdens de overdracht.",
+ "syncAddressTitle": "Adres",
+ "syncAddressTooltip": "Met deze waarde wordt bepaald of het adres van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncBirthdayTitle": "Verjaardag",
+ "syncBirthdayTooltip": "Met deze waarde wordt bepaald of de verjaardag van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncCompanyTitle": "Bedrijf",
+ "syncCompanyTooltip": "Met deze waarde wordt bepaald of de bedrijfsnaam van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncDepartmentTitle": "Afdeling",
+ "syncDepartmentTooltip": "Met deze waarde wordt bepaald of de afdeling van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncEmailAddressTitle": "E-mailadres",
+ "syncEmailAddressTooltip": "Met deze waarde wordt bepaald of het e-mailadres van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncInstantMessagingAddressTitle": "Adres voor chatberichten",
+ "syncInstantMessagingAddressTooltip": "Met deze waarde wordt bepaald of het adres voor chatberichten van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncJobTitleTitle": "Functie",
+ "syncJobTitleTooltip": "Met deze waarde wordt bepaald of de functie van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncNicknameTitle": "Bijnaam",
+ "syncNicknameTooltip": "Met deze waarde wordt bepaald of de bijnaam van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncNotesTitle": "Notities",
+ "syncNotesTooltip": "Met deze waarde wordt bepaald of de opmerkingen van de contactpersoon worden gesynchroniseerd naar native contactpersonen.",
+ "syncPhoneHomeFaxNumberTitle": "Faxnummer thuis",
+ "syncPhoneHomeFaxNumberTooltip": "Met deze waarde wordt bepaald of het privéfaxnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncPhoneHomeNumberTitle": "Telefoonnummer thuis",
+ "syncPhoneHomeNumberTooltip": "Met deze waarde wordt bepaald of het privételefoonnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncPhoneMobileNumberTitle": "Mobiel telefoonnummer",
+ "syncPhoneMobileNumberTooltip": "Met deze waarde wordt bepaald of het mobiele telefoonnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncPhoneOtherNumberTitle": "Ander telefoonnummer",
+ "syncPhoneOtherNumberTooltip": "Met deze waarde wordt bepaald of het andere telefoonnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncPhonePagerNumberTitle": "Pagernummer",
+ "syncPhonePagerNumberTooltip": "Met deze waarde wordt bepaald of het pagernummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncPhoneWorkFaxNumberTitle": "Faxnummer werk",
+ "syncPhoneWorkFaxNumberTooltip": "Met deze waarde wordt bepaald of het zakelijke faxnummer van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncPhoneWorkNumberTitle": "Telefoonnummer werk",
+ "syncPhoneWorkNumberTooltip": "Met deze waarde wordt bepaald of het werktelefoonnummer wordt gesynchroniseerd naar native contactpersonen.",
+ "syncPrefixTitle": "Naamvoorvoegsel",
+ "syncPrefixTooltip": "Met deze waarde wordt bepaald of het naamvoorvoegsel van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "syncSuffixTitle": "Naamachtervoegsel",
+ "syncSuffixTooltip": "Met deze waarde wordt bepaald of het naamachtervoegsel van de contactpersoon wordt gesynchroniseerd naar native contactpersonen.",
+ "textPredictionsTitle": "Tekstvoorspellingen",
+ "textPredictionsTooltip": "Outlook kan woorden en zinsdelen voorstellen bij het opstellen van berichten. Wanneer Outlook een suggestie geeft, kunt u vegen om deze te accepteren. Wanneer deze functie niet is geconfigureerd, is de app-standaardinstelling Aan.",
+ "themesEnabledTitle": "Thema's zijn ingeschakeld",
+ "themesEnabledTooltip": "Opgeven of de gebruiker een aangepast visueel thema mag gebruiken."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Gebruik deze instellingen om op de hoogte blijven over welke gebruikers apps installeren die niet zijn goedgekeurd voor gebruik in uw bedrijf. Selecteer het type lijst voor beperkte apps:
\r\n Verboden apps - een lijst met apps waarover u een melding wilt ontvangen als gebruikers ze installeren. \r\n Goedgekeurde apps - een lijst met apps die zijn goedgekeurd voor gebruik in uw bedrijf. Wanneer gebruikers een app installeren die niet in deze lijst voorkomt, ontvangt u een melding. \r\n ",
+ "androidZebraMxZebraMx": "Zebra-apparaten configureren door een MX-profiel in XML-indeling te uploaden.",
+ "iosDeviceFeaturesAirprint": "Gebruik deze instellingen om iOS-apparaten zodanig te configureren dat ze automatisch verbinding maken met printers in uw netwerk die compatibel zijn met AirPrint. U hebt het IP-adres en het resourcepad van uw printers nodig.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Een app-extensie configureren waarmee eenmalige aanmelding (SSO) wordt ingeschakeld voor apparaten met iOS 13.0 of hoger.",
+ "iosDeviceFeaturesHomeScreenLayout": "De indeling configureren voor het dock- en startscherm op iOS-apparaten. Bepaalde apparaten kennen limieten voor het aantal items dat kan worden weergegeven.",
+ "iosDeviceFeaturesIOSWallpaper": "Een afbeelding weergeven die wordt weergegeven op het startscherm en/of het vergrendelingsscherm van iOS-apparaten.\r\n Als u op elke locatie een unieke afbeelding wilt weergeven, maakt u een profiel met een afbeelding voor het vergrendelingsscherm en een profiel met een afbeelding voor het startscherm.\r\n Wijs vervolgens beide profielen aan uw gebruikers toe.\r\n \r\n
\r\n
Maximale bestandsgrootte: 750 kB
\r\n
Bestandstype: PNG, JPG of JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Meldingsinstellingen voor apps opgeven. Ondersteunt iOS 9.3 en hoger.",
+ "iosDeviceFeaturesSharedDevice": "Optionele tekst opgeven die wordt weergegeven op het vergrendelingsscherm. De functie wordt ondersteund voor iOS 9.3 en hoger. Meer informatie",
+ "iosGeneralApplicationRestrictions": "Gebruik deze instellingen om op de hoogte blijven over welke gebruikers apps installeren die niet zijn goedgekeurd voor gebruik in uw bedrijf. Selecteer het type lijst voor beperkte apps:
\r\n Verboden apps - een lijst met apps waarover u een melding wilt ontvangen als gebruikers ze installeren. \r\n Goedgekeurde apps - een lijst met apps die zijn goedgekeurd voor gebruik in uw bedrijf. Wanneer gebruikers een app installeren die niet in deze lijst voorkomt, ontvangt u een melding. \r\n ",
+ "iosGeneralApplicationVisibility": "In de lijst Apps weergeven kunt u de iOS-apps opgeven die gebruikers kunnen zien of starten. In de lijst met verborgen apps kunt u de iOS-apps opgeven die gebruikers niet kunnen zien of starten.",
+ "iosGeneralAutonomousSingleAppMode": "Apps die u aan deze lijst toevoegt en toewijst aan een apparaat, kunnen het apparaat vergrendelen zodra de app is gestart, zodat alleen de desbetreffende app kan worden uitgevoerd. Of het apparaat kan worden vergrendeld terwijl er een bepaalde acties wordt uitgevoerd (bijvoorbeeld wanneer u een test maakt). Zodra de actie is voltooid of u de beperking verwijdert, keert het apparaat terug naar de normale status.",
+ "iosGeneralKiosk": "Met de kioskmodus worden verschillende instellingen in een apparaat vergrendeld of wordt er één app gespecificeerd die op het apparaat mag worden uitgevoerd. Dit kan handig zijn wanneer er bijvoorbeeld in een winkel slechts één demo-app op het apparaat mag worden uitgevoerd.",
+ "macDeviceFeaturesAirprint": "Gebruik deze instellingen om macOS-apparaten zodanig te configureren dat ze automatisch verbinding maken met printers in uw netwerk die compatibel zijn met AirPrint. U hebt het IP-adres en het resourcepad van uw printers nodig.",
+ "macDeviceFeaturesAssociatedDomains": "De gekoppelde domeinen configureren voor het delen van gegevens en aanmeldingsreferenties tussen de apps en websites van uw organisatie. Dit profiel kan worden toegepast op apparaten met macOS 10.15 of hoger.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Een app-extensie configureren waarmee eenmalige aanmelding (SSO) wordt ingeschakeld voor apparaten met macOS 10.15 of hoger.",
+ "macDeviceFeaturesLoginItems": "Kies welke apps, bestanden en mappen worden geopend wanneer gebruikers zich aanmelden bij hun apparaten. Als u niet wilt dat gebruikers de weergave van de geselecteerde apps kunnen wijzigen, kunt u de app verbergen in de gebruikersconfiguratie.",
+ "macDeviceFeaturesLoginWindow": "Configureer het uiterlijk van het macOS-aanmeldingsscherm en de functies die beschikbaar zijn voor gebruikers voordat en nadat ze zich hebben aangemeld.",
+ "macExtensionsKernelExtensions": "Met deze instellingen kunt u het beleid voor kernelextensies configureren op apparaten met macOS 10.13.2 of hoger.",
+ "macGeneralDomains": "E-mailberichten die de gebruiker verzendt of ontvangt die niet overeenkomen met de domeinen die u hier opgeeft, worden gemarkeerd als niet-vertrouwd.",
+ "windows10EndpointProtectionApplicationGuard": "Tijdens het gebruik van Microsoft Edge beveiligt Microsoft Defender Application Guard uw omgeving tegen sites die door uw organisatie niet als vertrouwd zijn gedefinieerd. Als gebruikers sites bezoeken die niet worden vermeld in uw geïsoleerde netwerkgrens, worden deze sites geopend in een virtuele browsersessie in Hyper-V. Vertrouwde sites worden gedefinieerd door een netwerkgrens, die in Apparaatconfiguratie kan worden geconfigureerd. Deze functie is alleen beschikbaar voor apparaten met 64-bits Windows 10 of hoger.",
+ "windows10EndpointProtectionCredentialGuard": "Als u Credential Guard inschakelt, worden de volgende vereiste instellingen ingeschakeld:\r\n \r\n
\r\n
Beveiliging op basis van virtualisatie inschakelen: hiermee wordt beveiliging op basis van virtualisatie ingeschakeld bij de volgende keer opnieuw opstarten. Voor beveiliging op basis van virtualisatie wordt Windows Hypervisor gebruikt ter ondersteuning van beveiligingsservices.
\r\n \r\n
Beveiligd opstarten met directe geheugentoegang: hiermee wordt beveiliging op basis van virtualisatie ingeschakeld met beveiligd opstarten en directe geheugentoegang (DMA).
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Kies aanvullende apps die moeten worden gecontroleerd of kunnen worden vertrouwd door Microsoft Defender-toepassingsbeheer. Windows-onderdelen en alle apps uit Windows Store worden automatisch vertrouwd.
\r\n Toepassingen worden niet geblokkeerd wanneer ze in de modus Alleen controle worden uitgevoerd. De modus Alleen controle legt alle gebeurtenissen vast in de logboeken van de lokale client.\r\n ",
+ "windows10GeneralPrivacyPerApp": "Voeg apps toe waarvoor een ander privacygedrag moet gelden dan wat u in 'Standaardprivacy' hebt gedefinieerd.",
+ "windows10NetworkBoundaryNetworkBoundary": "De grens van het netwerk is de lijst met ondernemingsresources, zoals in de cloud gehoste domeinen en IP-adresbereiken voor computers op het bedrijfsnetwerk. Stel netwerkgrenzen in om beleid toe te passen ter bescherming van de gegevens die zich op deze locaties bevinden.",
+ "windowsHealthMonitoring": "Het beleid voor statuscontrole van Windows configureren.",
+ "windowsPhoneGeneralApplicationRestrictions": "Met Windows Phone kunt u voorkomen dat gebruikers apps installeren of starten die in de lijst met niet-toegestane apps staan of die niet voorkomen in de lijst met goedgekeurde apps. Alle beheerde apps moeten worden toegevoegd aan de goedgekeurde lijst."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Alleen geselecteerde blokkerende apps in de technicusfase laten mislukken",
+ "apps": "apps",
+ "appsListName": "Toepassingslijst",
+ "blockingApps": "Blokkerende apps",
+ "managedApps": "Beheerde apps",
+ "noApps": "Geen toepassingen",
+ "noAppsError": "Er is een fout opgetreden bij het ophalen van de toepassingen",
+ "selectApps": "Apps selecteren",
+ "selectedAppsCount": "{0} apps geselecteerd (max. 100)",
+ "useSelectedAppsAll": "Alles",
+ "useSelectedAppsSelected": "Geselecteerd",
+ "useSelectedAppsToggleLabel": "Gebruik van het apparaat blokkeren totdat vereiste apps zijn geïnstalleerd als deze zijn toegewezen aan de gebruiker/het apparaat"
+ },
+ "Header": {
+ "application": "Toepassing",
+ "publisher": "Uitgever",
+ "version": "Versie"
+ },
+ "SearchBox": {
+ "ariaLabel": "Apps zoeken",
+ "placeHolder": "Zoeken op naam of uitgever"
+ },
+ "allowToUseToggle": "Toestaan dat gebruikers het apparaat gebruiken als er een installatiefout optreedt",
+ "blockToggle": "Het apparaat blokkeren tot alle apps en profielen zijn geïnstalleerd",
+ "blockToolTip": "Als u Microsoft Word aan deze lijst toevoegt, kunnen doelgebruikers en apparaten bijvoorbeeld de pagina met de inschrijvingsstatus niet verlaten totdat Word is geïnstalleerd.",
+ "collectLogToggle": "Logboekverzameling en de diagnostische pagina inschakelen voor eindgebruikers",
+ "create": "Profiel maken",
+ "customMessageTextBox": "Foutbericht",
+ "customMessageToggle": "Aangepast bericht weergeven als de tijdslimiet bereikt wordt of er zich een fout voordoet",
+ "enableForAutopilotOnlyToggle": "Alleen pagina weergeven voor apparaten die zijn ingericht door Out-of-Box Experience (OOBE)",
+ "installQualityUpdatesToggle": "Windows-kwaliteitsupdates installeren (het apparaat wordt mogelijk opnieuw opgestart) (preview)",
+ "progressToggle": "De voortgang van de app- en profielconfiguratie weergeven",
+ "resetToggle": "Toestaan dat gebruikers het apparaat opnieuw instellen als er een installatiefout optreedt",
+ "timeout": "Een foutbericht weergeven als de installatie langer duurt dan het opgegeven aantal minuten"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Eigenschap",
+ "rule": "Regel",
+ "ruleDetails": "Regeldetails",
+ "value": "Waarde"
+ },
+ "assignIf": "Profiel toewijzen als",
+ "deleteWarning": "Hiermee wordt de geselecteerde regel voor toepasselijkheid verwijderd",
+ "dontAssignIf": "Profiel niet toewijzen als",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "en nog {0}",
+ "instructions": "Geef op hoe dit profiel moet worden toegepast binnen een toegewezen groep. Intune past het profiel alleen toe op apparaten die voldoen aan de gecombineerde criteria van deze regels.",
+ "maxText": "Maximaal",
+ "minText": "Minimaal",
+ "noActionRow": "Er zijn geen regels voor toepasselijkheid opgegeven",
+ "oSVersion": "bijvoorbeeld 1.2.3.4",
+ "toText": "tot",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "Editie besturingssysteem",
+ "windows10OsVersion": "Besturingssysteemversie",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Toestaan dat de gebruiker de instelling kan wijzigen",
+ "tooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen."
+ },
+ "AllowWorkAccounts": {
+ "title": "Alleen werk- of schoolaccounts toestaan",
+ "tooltip": " Als u deze instelling inschakelt, kunnen gebruikers geen persoonlijke e-mail- en opslagaccounts toevoegen in Outlook. Als de gebruiker een persoonlijk account heeft toegevoegd aan Outlook, wordt de gebruiker gevraagd om dit te verwijderen. Als de gebruiker het persoonlijke account niet verwijdert, kan het werk- of schoolaccount niet worden toegevoegd."
+ },
+ "BlockExternalImages": {
+ "title": "Externe afbeeldingen blokkeren",
+ "tooltip": "Als de optie Externe afbeeldingen blokkeren is ingeschakeld, wordt met de app voorkomen dat afbeeldingen die op internet worden gehost en in de berichttekst zijn ingesloten, kunnen worden gedownload. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt"
+ },
+ "ConfigureEmail": {
+ "title": "Instellingen van e-mailaccount configureren"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "In de standaardhandtekening voor de app wordt aangegeven of 'Outlook voor Android downloaden' als standaardhandtekening voor de app wordt gebruikt tijdens het opstellen van berichten. Als de instelling op Uit is ingesteld, wordt de standaardhandtekening niet gebruikt; gebruikers kunnen echter wel hun eigen handtekening toevoegen.\r\n\r\nWanneer deze instelling op Niet geconfigureerd is ingesteld, wordt de standaardinstelling voor de app ingesteld op Aan.",
+ "iOS": "In de standaardhandtekening voor de app wordt aangegeven of 'Outlook voor iOS downloaden' als standaardhandtekening voor de app wordt gebruikt tijdens het opstellen van berichten. Als de instelling op Uit is ingesteld, wordt de standaardhandtekening niet gebruikt; gebruikers kunnen echter wel hun eigen handtekening toevoegen.\r\n\r\nWanneer deze instelling op Niet geconfigureerd is ingesteld, wordt de standaardinstelling voor de app ingesteld op Aan."
+ },
+ "title": "Standaardhandtekening voor apps"
+ },
+ "OfficeFeedReplies": {
+ "title": "Feed detecteren",
+ "tooltip": "Feeds detecteren van uw meest gebruikte Office-bestanden. Deze feed is standaard ingeschakeld wanneer Delve is ingeschakeld voor de gebruiker. Wanneer de instelling niet is geconfigureerd, is de app standaard ingesteld op Aan."
+ },
+ "OrganizeMailByThread": {
+ "title": "E-mailberichten rangschikken op thread",
+ "tooltip": "Standaard worden e-mailconversaties in Outlook gebundeld in een weergave met gespreksthreads. Als deze instelling is uitgeschakeld, wordt elk e-mailbericht in Outlook afzonderlijk weergegeven en worden berichten niet op thread gegroepeerd."
+ },
+ "PlayMyEmails": {
+ "title": "Mijn e-mailberichten afspelen",
+ "tooltip": "De functie Mijn e-mailberichten afspelen is standaard niet ingeschakeld in de app, maar wordt aangeboden aan in aanmerking komende gebruikers via een banner in het Postvak IN. Wanneer deze functie is ingesteld op Uit, wordt deze niet aangeboden aan in aanmerking komende gebruikers in de app. Gebruikers kunnen ervoor kiezen Mijn e-mailberichten afspelen handmatig in te schakelen vanuit de app, zelfs wanneer deze functie is ingesteld op Uit. Als deze optie is ingesteld als Niet geconfigureerd, is de standaardinstelling voor de app Aan en wordt de functie aangeboden aan in aanmerking komende gebruikers."
+ },
+ "SuggestedReplies": {
+ "title": "Voorgestelde antwoorden",
+ "tooltip": "Wanneer u een bericht opent, kan Outlook antwoorden voorstellen onder het bericht. Als u een voorgesteld antwoord selecteert, kunt u het antwoord bewerken voordat u het verzendt."
+ },
+ "SyncCalendars": {
+ "title": "Agenda's synchroniseren",
+ "tooltip": "Configureren of gebruikers hun Outlook-agenda kunnen synchroniseren met de systeemeigen agenda-app en -database."
+ },
+ "TextPredictions": {
+ "title": "Tekstvoorspellingen",
+ "tooltip": "Outlook kan woorden en zinsdelen voorstellen bij het opstellen van berichten. Wanneer Outlook een suggestie geeft, kunt u vegen om deze te accepteren. Wanneer deze functie niet is geconfigureerd, is de app-standaardinstelling Aan."
+ },
+ "ThemesEnabled": {
+ "title": "Thema's zijn ingeschakeld",
+ "tooltip": "Opgeven of de gebruiker een aangepast visueel thema mag gebruiken."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS-apparaten"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Contactpersonen van beheerder",
+ "appPackaging": "Apps verpakken",
+ "autopatchGroups": "Autopatch-groepen",
+ "devices": "Apparaten",
+ "featureEnablement": "Functie activeren",
+ "feedback": "Feedback",
+ "gettingStarted": "Aan de slag",
+ "messages": "Berichten",
+ "onlineResources": "Onlineresources",
+ "policyHealth": "Beleidsstatus",
+ "policyHealthPreview": "Beleidsstatus (preview)",
+ "releaseManagement": "Releasebeheer",
+ "serviceRequests": "Serviceaanvragen",
+ "settings": "Instellingen",
+ "supportRequests": "Ondersteuningsaanvragen",
+ "tenantEnrollment": "Tenantinschrijving",
+ "tenantManagement": "Tenantbeheer"
+ },
+ "actions": "Acties voor niet-naleving",
+ "advancedExchangeSettings": "Instellingen voor Exchange Online",
+ "advancedThreatProtection": "Microsoft Defender for Endpoint",
+ "allApps": "Alle apps",
+ "allDevices": "Alle apparaten",
+ "androidFotaDeployments": "Android FOTA-implementaties",
+ "appBundles": "App-bundels",
+ "appCategories": "App-categorieën",
+ "appConfigPolicies": "App-configuratiebeleid",
+ "appConfigurationStatus": "App-configuratiestatus",
+ "appInstallStatus": "Installatiestatus van de app",
+ "appLicences": "App-licenties",
+ "appProtectionPolicies": "App-beveiligingsbeleid",
+ "appProtectionStatus": "App-beveiligingsstatus",
+ "appSelectiveWipe": "App selectief wissen",
+ "appleVppTokens": "Apple VPP-tokens",
+ "apps": "Apps",
+ "assign": "Toewijzingen",
+ "assignedPermissions": "Toegewezen machtigingen",
+ "assignedRoles": "Toegewezen rollen",
+ "autopilotDeploymentReport": "Autopilot-implementaties (preview-versie)",
+ "autopilotDeploymentReportV2": "Autopilot-implementaties 2.0 (preview)",
+ "brandingAndCustomization": "Aanpassen",
+ "cartProfiles": "Winkelwagenprofielen",
+ "certificateConnectors": "Certificaatconnectors",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Apparaten met cloudkoppeling (preview)",
+ "cloudPcActions": "Cloud pc-acties (preview)",
+ "cloudPcMaintenanceWindows": "Onderhoudsvensters voor cloud-pc (preview- versie)",
+ "compliancePolicies": "Nalevingsbeleid",
+ "complianceScriptManagement": "Scripts",
+ "complianceScriptManagementPreview": "Scripts (preview)",
+ "complianceSettings": "Instellingen van het nalevingsbeleid",
+ "conditionStatements": "Voorwaarde-instructies",
+ "conditions": "Locaties",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Configuratieprofielen",
+ "configurationScripts": "Configuratiescripts",
+ "connectorsAndTokens": "Connectors en tokens",
+ "corporateDeviceIdentifiers": "Bedrijfsapparaat-id's",
+ "customAttributes": "Aangepaste kenmerken",
+ "customAttributesMacOS": "Aangepaste kenmerken voor macOS",
+ "customNotifications": "Aangepaste meldingen",
+ "deploymentSettings": "Implementatie-instellingen",
+ "derivedCredentials": "Afgeleide referenties",
+ "deviceActions": "Apparaatacties",
+ "deviceCategories": "Apparaatcategorieën",
+ "deviceCleanUp": "Regels voor opschonen van apparaat",
+ "deviceEnrollmentManagers": "Apparaatinschrijvingsmanagers",
+ "deviceExecutionStatus": "Apparaatstatus",
+ "deviceLimitEnrollmentRestrictions": "Beperkingen op registratie van apparaatlimiet",
+ "deviceTypeEnrollmentRestrictions": "Beperkingen op registratie van platform",
+ "devices": "Apparaten",
+ "discoveredApps": "Gedetecteerde apps",
+ "edgePolicies": "Beleidsregels voor Microsoft Edge",
+ "embeddedSIM": "Mobiele eSIM-profielen (preview)",
+ "enrollDevices": "Apparaten inschrijven",
+ "enrollmentFailures": "Mislukte registraties",
+ "enrollmentNotifications": "Inschrijvingsmeldingen (preview)",
+ "enrollmentRestrictions": "Inschrijvingsbeperkingen",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange-serviceconnectors",
+ "failuresForCumulativeQualityUpdates": "Fouten met cumulatieve kwaliteitsupdates voor Windows",
+ "failuresForDriverUpdates": "Fouten bij bijwerken van Windows-stuurprogramma",
+ "failuresForFeatureUpdates": "Fouten bij updates voor functies",
+ "failuresForQualityUpdates": "Fouten bij versnelde updates van Windows",
+ "featureFlighting": "Functieflighting",
+ "featureUpdateDeployments": "Onderdelenupdates voor Windows 10 en hoger",
+ "flighting": "Flighting",
+ "fotaUpdate": "Geautomatiseerde firmware-update",
+ "groupPolicy": "Beheersjablonen",
+ "groupPolicyAnalytics": "Groepsbeleidsanalyse",
+ "helpSupport": "Help en ondersteuning",
+ "helpSupportReplacement": "Help en ondersteuning ({0})",
+ "iOSAppProvisioning": "Inrichtingsprofielen voor iOS-app",
+ "incompleteUserEnrollments": "Onvolledige gebruikersinschrijvingen",
+ "iosUpdates": "Updates voor iOS/iPadOS",
+ "legacyPcManagement": "Beheer van verouderde pc's",
+ "macOSSoftwareUpdate": "macOS-updates",
+ "macOSSoftwareUpdateAccountSummaries": "Installatiestatus voor macOS-apparaten",
+ "macOSSoftwareUpdateCategorySummaries": "Samenvatting van software-updates",
+ "macOSSoftwareUpdateStateSummaries": "updates",
+ "managedGooglePlay": "Beheerde Google Play",
+ "msfb": "Microsoft Store voor Bedrijven",
+ "myPermissions": "Mijn machtigingen",
+ "notifications": "Meldingen",
+ "officeApps": "Office-apps",
+ "officeProPlusPolicies": "Beleidsregels voor Office-apps",
+ "onPremise": "On-premises",
+ "onPremisesConnector": "On-premises Exchange ActiveSync-connector",
+ "onPremisesDeviceAccess": "Exchange ActiveSync-apparaten",
+ "onPremisesManageAccess": "On-premises toegang tot Exchange",
+ "outOfDateIosDevices": "Installatiefouten voor iOS-apparaten",
+ "overview": "Overzicht",
+ "partnerDeviceManagement": "Apparaatbeheer partner",
+ "perUpdateRingDeploymentState": "Implementatiestatus per updatering",
+ "permissions": "Machtigingen",
+ "platformApps": "{0} apps",
+ "platformDevices": "{0} apparaten",
+ "platformEnrollment": "Inschrijving {0}",
+ "policies": "Beleid",
+ "profiles": "Profielen",
+ "properties": "Eigenschappen",
+ "reports": "Rapporten",
+ "retireNoncompliantDevices": "Niet-compatibele apparaten buiten gebruik stellen",
+ "retireNoncompliantDevicesPreview": "Niet-compatibele apparaten buiten gebruik stellen (preview)",
+ "role": "Rol",
+ "scriptManagement": "Scripts",
+ "securityBaselines": "Beveiligingsbasislijnen",
+ "serviceToServiceConnector": "Exchange Online-connector",
+ "servicenowConnector": "ServiceNow-connector",
+ "shellScripts": "Shell-scripts",
+ "teamViewerConnector": "TeamViewer-connector",
+ "telecomeExpenseManagement": "Onkostenbeheer voor telecommunicatie",
+ "tenantAdmin": "Tenantbeheerder",
+ "tenantAdministration": "Tenantbeheer",
+ "termsAndConditions": "Voorwaarden",
+ "titles": "Titels",
+ "troubleshoot": "Probleem oplossen",
+ "troubleshootSupport": "probleemoplossing en ondersteuning",
+ "user": "Gebruiker",
+ "userExecutionStatus": "Gebruikersstatus",
+ "wdacSupplementalPolicies": "Aanvullende beleidsregels S-modus",
+ "win32CatalogUpdateApp": "Updates voor Enterprise App Management-apps",
+ "win32CatalogUpdateAppInPreview": "Updates voor Windows-catalogus-apps (Win32) (Preview)",
+ "win32CatalogUpdateAppPreviewTitle": "Enterprise App Catalog-apps met updates (preview)",
+ "win32CatalogUpdateAppTitle": "Enterprise App Catalog-apps met updates",
+ "windows10DriverUpdate": "Stuurprogramma-updates voor Windows 10 en hoger",
+ "windows10QualityUpdate": "Kwaliteitsupdates voor Windows 10 en hoger",
+ "windows10UpdateRings": "Ringen bijwerken voor Windows 10 en hoger",
+ "windows10XPolicyFailures": "Fouten met Windows 10X-beleid",
+ "windows365PartnerConnector": "Windows 365-partnerconnectors",
+ "windowsDiagnosticData": "Windows-gegevens",
+ "windowsEnterpriseCertificate": "Windows Enterprise-certificaat",
+ "windowsManagement": "Scripts",
+ "windowsSideLoadingKeys": "Windows-sleutels voor extern laden",
+ "windowsSymantecCertificate": "Windows-DigiCert-certificaat",
+ "windowsThreatReport": "Status van dreigingsagent"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Gebruikers toestaan om gegevens van geselecteerde services te openen",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Aantal te onderhouden eerdere pincodewaarden selecteren"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "Er is één blokkeringsactie vereist voor alle nalevingsbeleid.",
- "graceperiod": "Schema (dagen na niet-naleving)",
- "graceperiodInfo": "Opgeven na hoeveel dagen van niet-compatibiliteit deze actie moet worden geactiveerd voor het apparaat van de gebruiker",
- "subtitle": "Actieparameters opgeven",
- "title": "Actieparameters"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Beschikbaar maken voor gebruikers als een optionele update",
+ "optionalValue": "Optioneel",
+ "required": "Beschikbaar maken voor gebruikers als een vereiste update",
+ "requiredValue": "Vereist"
},
- "List": {
- "gracePeriodDay": "{0} dag na niet-naleving",
- "gracePeriodDays": "{0} dagen na niet-naleving",
- "gracePeriodHour": "{0} uur na niet-naleving",
- "gracePeriodHours": "{0} uur na niet-naleving",
- "gracePeriodMinute": "{0} minuut na niet-naleving",
- "gracePeriodMinutes": "{0} minuten na niet-naleving",
- "immediately": "Onmiddellijk",
- "schedule": "Schema",
- "scheduleInfoBalloon": "Dagen na niet-naleving",
- "subtitle": "Een reeks acties op niet-compatibele apparaten opgeven",
- "title": "Acties"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise-systeem-app",
+ "androidForWorkApp": "Beheerde Google Play Store-app",
+ "androidLobApp": "Line-Of-Business-app voor Android",
+ "androidStoreApp": "Android Store-app",
+ "builtInAndroid": "Ingebouwde Android-app",
+ "builtInApp": "Ingebouwde app",
+ "builtInIos": "Ingebouwde iOS-app",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS-webclip",
+ "iosLobApp": "Line-Of-Business-app voor iOS",
+ "iosStoreApp": "iOS Store-app",
+ "iosVppApp": "Volume Purchase Program-app voor iOS",
+ "lineOfBusinessApp": "Line-Of-Business-app",
+ "macOSDmgApp": "macOS-app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Line-Of-Business-app voor macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365-apps (macOS)",
+ "macOSPkgApp": "macOS-app (PKG)",
+ "macOSWebClip": "Webclip voor macOS",
+ "macOsVppApp": "Volume Purchase Program-app voor macOS",
+ "managedAndroidLobApp": "Beheerde Line-Of-Business-app voor Android",
+ "managedAndroidStoreApp": "Beheerde Android Store-app",
+ "managedGooglePlayApp": "Beheerde Google Play Store-app",
+ "managedGooglePlayPrivateApp": "Persoonlijke beheerde Google Play-app",
+ "managedGooglePlayWebApp": "Webkoppeling voor beheerde Google Play",
+ "managedIosLobApp": "Beheerde Line-Of-Business-app voor iOS",
+ "managedIosStoreApp": "Beheerde iOS Store-app",
+ "microsoftStoreForBusinessApp": "Microsoft Store voor Bedrijven-app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store voor Bedrijven",
+ "officeSuiteApp": "Microsoft 365-apps (Windows 10 en hoger)",
+ "webApp": "Webkoppeling",
+ "windowsAppXLobApp": "AppX Line-Of-Business-app voor Windows",
+ "windowsClassicApp": "Windows-app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 en hoger)",
+ "windowsMobileMsiLobApp": "MSI Line-Of-Business-app voor Windows",
+ "windowsPhone81AppXBundleLobApp": "AppX Line-Of-Business-app voor Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "AppX Line-Of-Business-app voor Windows Phone 8.1",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 Store-app",
+ "windowsPhoneXapLobApp": "XAP Line-Of-Business-app voor Windows Phone",
+ "windowsStoreApp": "Microsoft Store-app (verouderd)",
+ "windowsUniversalAppXLobApp": "Universele AppX Line-Of-Business-app voor Windows",
+ "windowsUniversalLobApp": "Universele Line-Of-Business-app voor Windows",
+ "windowsWebApp": "Windows-webkoppeling"
+ },
+ "PolicySet": {
+ "appManagement": "Toepassingsbeheer",
+ "assignments": "Toewijzingen",
+ "basics": "Grondbeginselen",
+ "deviceEnrollment": "Apparaatinschrijving",
+ "deviceManagement": "Apparaatbeheer",
+ "scopeTags": "Bereiktags",
+ "appConfigurationTitle": "App-configuratiebeleid",
+ "appProtectionTitle": "App-beveiligingsbeleid",
+ "appTitle": "Apps",
+ "iOSAppProvisioningTitle": "Inrichtingsprofielen voor iOS-app",
+ "deviceLimitRestrictionTitle": "Beperkingen voor apparaatlimieten",
+ "deviceTypeRestrictionTitle": "Beperkingen voor apparaattypen",
+ "enrollmentStatusSettingTitle": "Inschrijvingsstatuspagina's",
+ "windowsAutopilotDeploymentProfileTitle": "Windows AutoPilot-implementatieprofielen",
+ "deviceComplianceTitle": "Beleidsregels voor apparaatcompatibiliteit",
+ "deviceConfigurationTitle": "Apparaatconfiguratieprofielen",
+ "powershellScriptTitle": "PowerShell-scripts"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Na installatie van de app kan opnieuw opstarten van het apparaat worden afgedwongen",
+ "basedOnReturnCode": "Bepaal bedrag op basis van retourcodes",
+ "force": "Via Intune wordt opnieuw opstarten van het apparaat afgedwongen",
+ "suppress": "Geen specifieke actie"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Installatietijd vereist (minuten)",
+ "maxRunTimeInMinutesToolTip": "Het aantal minuten dat het systeem wacht totdat het installatieprogramma is voltooid. De standaardwaarde is 60 minuten."
+ },
+ "RunAsAccountOptions": {
+ "system": "Systeem",
+ "user": "Gebruiker"
+ },
+ "availableUninstall": "Beschikbare verwijdering toestaan",
+ "availableUninstallTooltip": "Selecteer Ja om de optie voor het verwijderen van deze app op te geven voor gebruikers van de Bedrijfsportal. Selecteer Nee om te voorkomen dat gebruikers de app verwijderen uit de Bedrijfsportal.",
+ "bladeTitle": "Programma",
+ "deviceRestartBehavior": "Gedrag voor opnieuw opstarten van apparaat",
+ "deviceRestartBehaviorTooltip": "Selecteer het gedrag voor het opnieuw opstarten van het apparaat na installatie van de app. Selecteer Bepaal gedrag op basis van retourcodes om het apparaat opnieuw op te starten op basis van de instellingen van de retourcodes. Selecteer 'Geen specifieke actie' om opnieuw opstarten van het apparaat te onderdrukken bij het installeren van apps op basis van MSI. Selecteer Na installatie van de app kan opnieuw opstarten van het apparaat worden afgedwongen als u wilt dat de app wordt geïnstalleerd zonder dat opnieuw opstarten wordt onderdrukt. Selecteer Via Intune wordt opnieuw opstarten van het apparaat afgedwongen om het apparaat altijd opnieuw op te starten na installatie van de app.",
+ "header": "Geef de opdrachten op voor het installeren en verwijderen van deze app:",
+ "installCommand": "Opdracht voor installeren",
+ "installCommandMaxLengthErrorMessage": "De installatieopdracht mag niet langer zijn dan de maximaal toegestane lengte van 1024 tekens.",
+ "installCommandTooltip": "De volledige opdrachtregel voor installatie die wordt gebruikt om deze app te installeren.",
+ "runAs32Bit": "Opdrachten voor installeren en verwijderen uitvoeren in een 32 bitsproces op 64 bitsclients",
+ "runAs32BitTooltip": "Selecteer Ja als u de app in een 32 bitsproces op 64 bitsclients wilt installeren en verwijderen. Selecteer Nee (standaard) als u de app in een 64 bitsproces op 64 bitsclients wilt installeren en verwijderen. 32 bitsclients gebruiken altijd een 32 bitsproces.",
+ "runAsAccount": "Installatiegedrag",
+ "runAsAccountTooltip": "Selecteer Systeem om deze app te installeren voor alle gebruikers, indien ondersteund. Selecteer Gebruiker om deze app te installeren voor de aangemelde gebruiker op het apparaat. Bij wijzigingen kunnen updates en verwijderingen voor apps met MSI met een dubbel doel pas worden voltooid als de waarde die tijdens de oorspronkelijke installatie op het apparaat is toegepast, is hersteld.",
+ "selectorLabel": "Programma",
+ "uninstallCommand": "Opdracht voor verwijderen",
+ "uninstallCommandTooltip": "De volledige opdrachtregel voor verwijdering die wordt gebruikt om deze app te verwijderen."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Overige",
- "additionalRecipients": "Extra geadresseerden (via e-mail)",
- "additionalRecipientsBladeTitle": "Aanvullende ontvangers selecteren",
- "emailAddressPrompt": "E-mailadressen invoeren (gescheiden door komma's)",
- "invalidEmail": "Ongeldig e-mailadres",
- "messageTemplate": "Berichtsjabloon",
- "noneSelected": "Niets geselecteerd",
- "notSelected": "Niet geselecteerd",
- "numSelected": "{0} geselecteerd",
- "selected": "Geselecteerd"
- },
- "block": "Het apparaat als niet-compatibel markeren",
- "lockDevice": "Apparaat vergrendelen (lokale actie)",
- "lockDeviceWithPasscode": "Apparaat vergrendelen (lokale actie)",
- "noAction": "Geen actie",
- "noActionRow": "Geen acties. Selecteer Toevoegen om een actie toe te voegen",
- "pushNotification": "Pushmelding verzenden naar eindgebruiker",
- "remoteLock": "Het niet-compatibele apparaat extern vergrendelen",
- "removeSourceAccessProfile": "Brontoegangsprofiel verwijderen",
- "retire": "Apparaat toevoegen aan buitengebruikstellingslijst",
- "wipe": "Wissen",
- "emailNotification": "E-mail verzenden naar de eindgebruiker"
- },
- "InstallIntent": {
- "available": "Beschikbaar voor ingeschreven apparaten",
- "availableWithoutEnrollment": "Beschikbaar met of zonder inschrijving",
- "required": "Vereist",
- "uninstall": "Verwijderen"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Aangepast script maken",
- "edit": "Aangepast script bewerken"
- },
- "basicInfo": "Maak een nieuw aangepast scriptpakket op basis van detectie- en herstelscripts die u hebt geschreven.",
- "customScriptCapitalized": "Aangepast script",
- "customScriptLowercase": "aangepast script",
- "detectionScript": "Detectiescript"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Kleine letters toestaan in een pincode",
+ "notAllow": "Geen kleine letters toestaan in een pincode",
+ "requireAtLeastOne": "Minimaal één kleine letter vereisen in een pincode"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Speciale tekens toestaan in een pincode",
+ "notAllow": "Geen speciale tekens toestaan in een pincode",
+ "requireAtLeastOne": "Minimaal één speciaal teken vereisen in een pincode"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Hoofdletters toestaan in een pincode",
+ "notAllow": "Geen hoofdletters toestaan in een pincode",
+ "requireAtLeastOne": "Minimaal één hoofdletter vereisen in een pincode"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Nieuwe maken",
+ "createNewResourceAccountInfo": "
\r\nMaak een nieuw resourceaccount tijdens de registratie. Het resourceaccount wordt direct aan de tabel met resourceaccounts toegevoegd, maar wordt pas actief als het apparaat is ingeschreven en het Surface Hub-abonnement is gecontroleerd. Meer informatie over resourceaccounts
\r\n ",
+ "createNewResourceTitle": "Nieuw resourceaccount maken",
+ "deviceNameInvalid": "De apparaatnaam heeft een ongeldige indeling",
+ "deviceNameRequired": "Een apparaatnaam is vereist",
+ "editResourceAccountLabel": "Bewerken",
+ "selectExistingCommandMenu": "Bestaande selecteren"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "Namen mogen maximaal 15 tekens bevatten en mogen letters (a-z, A-Z), cijfers (0-9) en afbreekstreepjes bevatten. Namen mogen niet alleen cijfers bevatten. Namen mogen geen spatie bevatten."
+ },
+ "Header": {
+ "addressableUserName": "Beschrijvende naam van gebruiker",
+ "azureADDevice": "Gekoppeld Microsoft Entra-apparaat",
+ "batch": "Groepstag",
+ "dateAssigned": "Datum van toewijzing",
+ "deviceAccountPwd": "Wachtwoord van apparaataccount",
+ "deviceAccountUpn": "Apparaataccount",
+ "deviceDisplayName": "Apparaatnaam",
+ "deviceFriendlyName": "Beschrijvende naam van het apparaat",
+ "deviceName": "Apparaatnaam",
+ "deviceUseType": "Type apparaatgebruik",
+ "enrollmentState": "Inschrijvingsstatus",
+ "intuneDevice": "Gekoppeld Intune-apparaat",
+ "lastContacted": "Voor het laatst contact opgenomen",
+ "make": "Fabrikant",
+ "model": "Model",
+ "profile": "Toegewezen profiel",
+ "profileStatus": "Profielstatus",
+ "purchaseOrderId": "Inkooporder",
+ "resourceAccount": "Resourceaccount",
+ "serialNumber": "Serienummer",
+ "userPrincipalName": "Gebruiker"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Een beschrijvende naam is vereist",
+ "pwdRequired": "Het wachtwoord is vereist.",
+ "pwdValidFormat": "Kan het wachtwoord niet bijwerken. De opgegeven waarde voor het nieuwe wachtwoord voldoet niet aan de lengte- of complexiteitsvereisten van het domein.",
+ "upnRequired": "Er is een apparaataccount vereist",
+ "upnValidFormat": "Waarden kunnen letters (a-z, A-Z), cijfers (0-9) en afbreekstreepjes bevatten. Waarden mogen geen lege ruimte bevatten."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Vergadering en presentaties",
+ "teamCollaboration": "Teamsamenwerking"
+ },
+ "Devices": {
+ "featureDescription": "Met Windows Autopilot kunt u de out-of-box-experience (OOBE) voor uw apparaten aanpassen.",
+ "importErrorStatus": "Enkele apparaten zijn niet geïmporteerd. Klik hier voor meer informatie.",
+ "importPendingStatus": "Importeren wordt uitgevoerd. Verstreken tijd: {0} min. Dit proces kan tot {1} minuten duren."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Microsoft Entra hybride gekoppeld",
+ "activeDirectoryADLabel": "Samenvoeging van hybride Microsoft Entra met Autopilot",
+ "azureAD": "Samengevoegd met Microsoft Entra",
+ "unknownType": "Onbekend type"
+ },
+ "Filter": {
+ "enrollmentState": "Status",
+ "profile": "Profielstatus"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "Beschrijvende naam van gebruiker mag niet leeg zijn."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Maak een naamgevingssjabloon om namen aan uw apparaten toe te voegen tijdens de registratie.",
+ "label": "Sjabloon voor apparaatnamen toepassen"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "Voor Autopilot-implementatieprofielen die zijn samengevoegd met hybride Microsoft Entra, krijgen computers een naam op basis van instellingen die zijn opgegeven in de configuratie van de domeindeelname."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MyCompany-%RAND:4%",
+ "label": "Een naam invoeren",
+ "noDisallowedChars": "De naam mag alleen alfanumerieke tekens, afbreekstreepjes, %SERIAL% of %RAND:x% bevatten",
+ "serialLength": "Mag niet meer dan 7 tekens met %SERIAL% bevatten",
+ "validateLessThan15Chars": "De naam mag maximaal 15 tekens bevatten",
+ "validateNoSpaces": "Computernamen mogen geen spaties bevatten",
+ "validateNotAllNumbers": "De naam moet ook letters en/of afbreekstreepjes bevatten",
+ "validateNotEmpty": "Naam kan niet leeg zijn",
+ "validateOnlyOneMacro": "De naam mag alleen één v%SERIAL% of %RAND:x% bevatten"
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Maak een unieke naam voor uw apparaten. Namen mogen maximaal 15 tekens bevatten en mogen letters (a-z, A-Z), cijfers (0-9) en afbreekstreepjes bevatten. Namen mogen niet alleen cijfers bevatten. Namen mogen geen spaties bevatten. Gebruik de macro %SERIAL% om een hardwarespecifiek serienummer toe te voegen. U kunt eventueel de macro %RAND:x% gebruiken om een willekeurige tekenreeks van getallen toe te voegen, waarbij x staat voor het aantal toe te voegen cijfers."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Inschakelen dat met het vijf maal indrukken van de Windows-toets OOBE zonder gebruikersverificatie wordt uitgevoerd om het apparaat in te schrijven en alle apps en instellingen voor de systeemcontext in te richten. Apps en instellingen voor de gebruikerscontext worden beschikbaar gemaakt wanneer de gebruiker zich aanmeldt.",
+ "label": "Vooraf ingerichte implementatie toestaan"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "De Autopilot-stroom die is samengevoegd met hybride Microsoft Entra wordt voortgezet, zelfs als er tijdens OOBE geen verbinding met de domeincontroller tot stand wordt gebracht.",
+ "label": "AD-connectiviteitscontrole overslaan"
+ },
+ "accountType": "Gebruikersaccounttype",
+ "accountTypeInfo": "Geef op of gebruikers beheerders of standaardgebruikers zijn op het apparaat. Deze instelling geldt niet voor accounts van globale beheerders of bedrijfsbeheerders. Deze accounts kunnen geen standaardgebruikers zijn, omdat ze toegang hebben tot alle beheerfuncties in Microsoft Entra ID.",
+ "configOOBEInfo": "
\r\nDe out-of-box-ervaring voor uw Autopilot-apparaten configureren\r\n
",
+ "configureDevice": "Implementatiemodus",
+ "configureDeviceHintForSurfaceHub2": "Autopilot ondersteunt alleen de zelfimplementatiemodus voor Surface Hub 2. In deze modus wordt de gebruiker niet gekoppeld aan het ingeschreven apparaat, zodat er geen gebruikersreferenties zijn vereist.",
+ "configureDeviceHintForWindowsPC": "
\r\n De implementatiemodus bepaalt of een gebruiker referenties moet opgeven om het apparaat in te richten.\r\n
\r\n
\r\n
\r\n Op basis van gebruiker: apparaten zijn gekoppeld aan de gebruiker die het apparaat inschrijft en er zijn gebruikersreferenties vereist om het apparaat in te richten \r\n
\r\n
\r\n Zelf-implementerend (preview): apparaten zijn niet gekoppeld aan de gebruiker die het apparaat inschrijft en er zijn geen gebruikersreferenties vereist om het apparaat in te richten\r\n
\r\n
",
+ "createSurfaceHub2Info": "Configureer de Autopilot-inschrijvingsinstellingen voor uw Surface Hub 2-apparaten. In Autopilot wordt gebruikersverificatie standaard overgeslagen tijdens OOBE. Meer informatie over Windows Autopilot voor Surface Hub 2.",
+ "createWindowsPCInfo": "\r\n
\r\nDe volgende opties worden automatisch ingeschakeld voor Autopilot-apparaten in de modus voor zelfimplementatie:\r\n
\r\n
\r\n
\r\n Selectie van Werk of Thuisgebruik overslaan\r\n
\r\n
\r\n OEM-registratie en OneDrive-configuratie overslaan\r\n
\r\n
\r\n Gebruikersverificatie in OOBE overslaan\r\n
\r\n
",
+ "endUserDevice": "Op basis van gebruiker",
+ "hideEscapeLink": "Opties voor het wijzigen van het account verbergen",
+ "hideEscapeLinkInfo": "Opties om het account te wijzigen en opnieuw te beginnen met een ander account worden respectievelijk weergegeven tijdens de eerste keer dat een apparaat op de aanmeldingspagina van het bedrijf wordt ingesteld en op de domeinfoutpagina. Als u deze opties wilt verbergen, moet u in Microsoft Entra ID een aangepaste huisstijl configureren (dit vereist Windows 10, 1809 of hoger, of Windows 11).",
+ "info": "Met de AutoPilot-profielinstellingen wordt de Out-Of-Box Experience gedefinieerd die gebruikers zien als ze Windows voor de eerste keer starten. ",
+ "language": "Taal (regio)",
+ "languageInfo": "De te gebruiken taal en regio opgeven.",
+ "licenseAgreement": "Licentiebepalingen van Microsoft-software",
+ "licenseAgreementInfo": "Opgeven of de gebruiksrechtovereenkomst moet worden weergeven aan gebruikers.",
+ "plugAndForgetDevice": "Automatische implementatie",
+ "privacySettingWarning": "De standaardwaarde voor het verzamelen van diagnostische gegevens is gewijzigd voor apparaten met Windows 10, versie 1903 en hoger of Windows 11. ",
+ "privacySettings": "Privacyinstellingen",
+ "privacySettingsInfo": "Opgeven of de privacyinstellingen moeten worden weergegeven aan gebruikers.",
+ "showCortanaConfigurationPage": "Cortana-configuratie",
+ "showCortanaConfigurationPageInfo": "Met Weergeven wordt de Cortana-configuratie-introductie ingeschakeld tijdens het opstarten.",
+ "skipEULAWarning": "Belangrijke informatie over het verbergen van licentievoorwaarden",
+ "skipKeyboardSelection": "Toetsenbord automatisch configureren",
+ "skipKeyboardSelectionInfo": "Als de waarde Waar is ingesteld, wordt de pagina Toetsenbord selecteren overgeslagen als de taal is ingesteld.",
+ "subtitle": "AutoPilot-profielen",
+ "title": "Out-Of-Box Experience (OOBE)",
+ "useOSDefaultLanguage": "Standaardbesturingssysteem",
+ "userSelect": "Gebruikersselectie"
},
+ "Sync": {
+ "lastRequestedLabel": "Laatste synchronisatieaanvraag",
+ "lastSuccessfulLabel": "Laatste voltooide synchronisatie",
+ "syncInProgress": "De synchronisatie wordt uitgevoerd. Probeer het later opnieuw.",
+ "syncInitiated": "AutoPilot-instellingen synchroniseren is geïnitialiseerd.",
+ "syncSettingsTitle": "AutoPilot-instellingen synchroniseren"
+ },
+ "Title": {
+ "devices": "Windows AutoPilot-apparaten"
+ },
+ "Tooltips": {
+ "addressableUserName": "Begroetingsnaam die tijdens de installatie van apparaat wordt weergegeven.",
+ "azureADDevice": "Ga naar Apparaatdetails voor het gekoppelde apparaat. N.v.t. betekent dat er geen gekoppeld apparaat is.",
+ "batch": "Een tekenreekskenmerk dat kan worden gebruikt om een groep apparaten te identificeren. Met het veld Groepstag van Intune wordt het kenmerk OrderID op Microsoft Entra-apparaten toegewezen.",
+ "dateAssigned": "Tijdstempel van het moment waarop het profiel is toegewezen aan het apparaat.",
+ "deviceAccountPwd": "Wachtwoord van apparaataccount voor Surface Hub-apparaten. Indien ingevoerd, vult u ook het apparaataccount en de beschrijvende naam in.",
+ "deviceAccountUpn": "E-mailadres van apparaataccount voor Surface Hub-apparaten. Indien ingevoerd, vult u ook het wachtwoord en de beschrijvende naam van het apparaataccount in.",
+ "deviceDisplayName": "Configureer een unieke naam voor een apparaat. Deze naam wordt genegeerd in de implementaties die zijn samengevoegd met hybride Microsoft Entra. De apparaatnaam is nog steeds afkomstig van het domeindeelnameprofiel voor hybride Microsoft Entra-apparaten.",
+ "deviceFriendlyName": "Beschrijvende naam voor Surface Hub-apparaten. Indien ingevoerd, vult u ook het wachtwoord voor het apparaataccount en het apparaataccount in.",
+ "deviceName": "De naam die wordt weergegeven wanneer iemand heeft geprobeerd het apparaat te detecteren en verbinding te maken.",
+ "deviceUseType": " Het apparaat wordt ingesteld op basis van uw keuze. U kunt later altijd wijzigingen aanbrengen in de instellingen.\r\n
\r\n
Voor vergaderingen en presentaties is Windows Hello niet ingeschakeld en worden de gegevens na elke sessie verwijderd.\r\n
\r\n
Voor teamsamenwerking is Windows Hello ingeschakeld en worden de profielen opgeslagen voor snelle aanmelding
\r\n
",
+ "enrollmentState": "Hiermee wordt aangegeven of het apparaat is ingeschreven.",
+ "intuneDevice": "Ga naar Apparaatdetails voor het gekoppelde apparaat. N.v.t. betekent dat er geen gekoppeld apparaat is.",
+ "lastContacted": "Tijdstempel van het moment waarop voor het laatst contact is opgenomen met het apparaat.",
+ "make": "Fabrikant van het geselecteerde apparaat.",
+ "model": "Model van het geselecteerde apparaat",
+ "profile": "Naam van het profiel dat is toegewezen aan het apparaat.",
+ "profileStatus": "Hiermee wordt aangegeven of er een profiel aan het apparaat is toegewezen.",
+ "purchaseOrderId": "Inkooporder-id",
+ "resourceAccount": "De id van het apparaat of de user principal name (UPN).",
+ "serialNumber": "Serienummer van het geselecteerde apparaat.",
+ "userPrincipalName": "Gebruiker naar vooraf ingevulde verificatie tijdens de installatie van het apparaat."
+ },
+ "allDevices": "Alle apparaten",
+ "allDevicesAlreadyAssignedError": "Er is al een Autopilot-profiel toegewezen aan alle apparaten.",
+ "assignFailedDescription": "Kan de toewijzingen voor {0} niet bijwerken.",
+ "assignFailedTitle": "Kan de AutoPilot-profieltoewijzingen niet bijwerken.",
+ "assignSuccessDescription": "De toewijzingen voor {0} zijn bijgewerkt.",
+ "assignSuccessTitle": "De AutoPilot-profieltoewijzingen zijn bijgewerkt.",
+ "assignSufaceHub2ProfileNextStep": "Volgende stappen voor deze implementatie",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Wijs dit profiel toe aan minstens één apparaatgroep",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Wijs een resourceaccount toe aan elk Surface Hub-apparaat waarop u dit profiel implementeert",
+ "assignedDevicesCount": "Toegewezen apparaten",
+ "assignedDevicesResourceAccountDescription": "
Als u dit profiel op een apparaat wilt implementeren, moet u een resourceaccount toewijzen aan het apparaat. Selecteer één apparaat per keer om een bestaand resourceaccount toe te wijzen of om een nieuw account te maken. Meer informatie over resourceaccounts
",
+ "assignedDevicesResourceAccountStatusBarMessage": "In deze tabel vindt u alleen de Surface Hub 2-apparaten waaraan dit profiel is toegewezen.",
+ "assigningDescription": "Toewijzingen voor {0} bijwerken.",
+ "assigningTitle": "AutoPilot-profieltoewijzingen bijwerken.",
+ "autoremediationContext": "Er is een hardwarewijziging gedetecteerd op dit apparaat. We proberen de nieuwe hardware automatisch te registreren. U hoeft nu niets te doen; de status wordt bijgewerkt bij de volgende check-in met het resultaat. Meer informatie over het opnieuw instellen van het profiel.",
+ "autoremediationTitle": "Er is een oplossing in behandeling voor het apparaat {0}",
+ "cannotDeleteMessage": "Dit profiel is toegewezen aan groepen. U moet de toewijzing van alle groepen aan dit profiel ongedaan maken voordat u het kunt verwijderen.",
+ "cannotDeleteTitle": "Kan {0} niet verwijderen",
+ "createdDateTime": "Gemaakt",
+ "deleteMessage": "Als u dit AutoPilot-profiel verwijdert, verschijnt bij apparaten die aan deze categorie zijn toegewezen de melding Niet toegewezen.",
+ "deleteMessageWithPolicySet": "{0} maakt deel uit van een of meer beleidssets. Als u {0} verwijdert, kunt u deze niet langer toewijzen via deze beleidssets.",
+ "deleteTitle": "Weet u zeker dat u dit profiel wilt verwijderen?",
+ "description": "Beschrijving",
+ "deviceType": "Apparaattype",
+ "deviceUse": "Apparaatgebruik",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot ondersteunt alleen apparaten die met Microsoft Entra voor Surface Hub 2 zijn samengevoegd. Geef aan hoe apparaten aan Active Directory (AD) in uw organisatie worden toegevoegd.\r\n
\r\n
\r\n
\r\n Met Microsoft Entra samengevoegd: alleen in de cloud zonder on-premises Windows Server Active Directory.\r\n
\r\n Opgeven hoe apparaten worden samengevoegd met Active Directory (AD) in uw organisatie:\r\n
\r\n
\r\n
\r\n Samengevoegd met Microsoft Entra: alleen in de cloud zonder een on-premises Windows Server Active Directory\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Er is een fout opgetreden bij het ophalen van het aantal toegewezen apparaten.",
+ "getAssignmentsError": "Er is een fout opgetreden bij het ophalen van de AutoPilot-profieltoewijzingen.",
+ "harvestDeviceId": "Alle doelapparaten converteren naar Autopilot",
+ "harvestDeviceIdDescription": "Dit profiel kan standaard alleen worden toegepast op Autopilot-apparaten die zijn gesynchroniseerd vanuit de Autopilot-service.",
+ "harvestDeviceIdInfo": "\r\n Selecteer Ja als u alle doelapparaten bij Autopilot wilt registreren als deze nog niet zijn geregistreerd. De volgende keer dat geregistreerde apparaten de Windows Out of Box Experience (OOBE) doorlopen, wordt het toegewezen Autopilot-scenario toegepast.\r\n \r\n Houd er rekening mee dat voor bepaalde Autopilot-scenario's specifieke minimale builds van Windows vereist zijn. Controleer of uw apparaat de vereiste minimumbuild heeft om het scenario te doorlopen.\r\n \r\n Als u het profiel verwijdert, worden betrokken apparaten niet verwijderd uit Autopilot. Als u een apparaat wilt verwijderen uit Autopilot, gebruikt u de weergave Windows Autopilot-apparaten.\r\n ",
+ "harvestDeviceIdWarning": "Na de conversie kunt u Autopilot-apparaten alleen herstellen door de apparaten te verwijderen uit de lijst met Autopilot-apparaten.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Met Windows AutoPilot Deployment-profielen kunt u de out-of-box experience voor uw apparaten aanpassen.",
+ "invalidProfileNameMessage": "Het teken {0} is niet toegestaan",
+ "joinTypeLabel": "Microsoft Entra ID samenvoegen als",
+ "lastModifiedDateTime": "Laatst gewijzigd:",
+ "manualRemediationContext": "Er is een hardwarewijziging gedetecteerd op dit apparaat. Het ontvangt niet automatisch een Autopilot-profiel wanneer het opnieuw wordt ingesteld, tenzij u het apparaat opnieuw registreert. Meer informatie over het opnieuw instellen van het profiel.",
+ "manualRemediationTitle": "Apparaat {0} heeft uw aandacht nodig",
+ "name": "Naam",
+ "noAutopilotProfile": "Geen AutoPilot-profielen",
+ "notEnoughPermissionAssignedError": "U hebt onvoldoende machtigingen om dit profiel toe te wijzen aan een of meer van uw geselecteerde groepen. Neem contact op met uw beheerder.",
+ "profile": "profiel",
+ "resourceAccountStatusBarMessage": "Er is een resourceaccount vereist voor elk Surface Hub 2-apparaat waarvoor dit profiel is geïmplementeerd. Klik voor meer informatie.",
+ "selectServices": "Selecteer adreslijstservice-apparaten die worden toegevoegd",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Implementatiemodus",
+ "windowsPCCommandMenu": "Windows-pc",
+ "directoryServiceLabel": "Samenvoegen met Microsoft Entra ID als"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Beheerde apparaten",
+ "devicesWithoutEnrollment": "Beheerde apps"
+ },
+ "AppProtection": {
+ "allAppTypes": "Doel voor alle app-typen",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Apps in Android for Work-profiel",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps op toegewezen Android Enterprise-apparaten met gedeelde Microsoft Entra-modus",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Apps op Android Open Source Project met gekoppelde gebruiker",
+ "appsOnAndroidOpenSourceProjectUserless": "Apps op Android Open Source Project zonder gebruiker",
+ "appsOnIntuneManagedDevices": "Apps op door Intune beheerde apparaten",
+ "appsOnUnmanagedDevices": "Apps op niet-beheerde apparaten",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Niet beschikbaar",
+ "windows10PlatformLabel": "Windows 10 en later",
+ "withEnrollment": "Met inschrijving",
+ "withoutEnrollment": "Zonder inschrijving"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Project Online Desktop Client",
+ "visioProRetail": "Visio Online-abonnement 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Kan {0} niet verwijderen",
+ "failureCa": "Kan {0} niet verwijderen omdat ernaar wordt verwezen door CA-beleid",
+ "modifying": "{0} verwijderen",
+ "success": "{0} is verwijderd"
+ },
+ "Notify": {
+ "failure": "Kan {0} niet bijwerken",
+ "modifying": "{0} wijzigen",
+ "success": "{0} is bijgewerkt"
+ },
+ "menuLabel": "Verificatiecontext"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Meer informatie over het vereisen van verificatiemethoden die zijn voldaan door federatieproviders.",
+ "certificate": "Certificaatverificatie",
+ "infoBubble": "Geef een vereiste verificatiemethode op die moet worden voldaan door de federatieprovider, bijvoorbeeld ADFS.",
+ "multifactor": "Meervoudige verificatie",
+ "require": "Federatieve verificatiemethode vereisen (preview)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Een beleid voor permanente browsersessies werkt alleen correct als de optie Alle cloud-apps is geselecteerd. Werk uw selectie cloud-apps bij."
+ },
+ "Option": {
+ "always": "Altijd permanent",
+ "help": "In een permanente browsersessie kunnen gebruikers aangemeld blijven na het sluiten en opnieuw openen van hun browservenster. \n
\n
Deze instelling werkt correct als de optie Alle cloud-apps is geselecteerd
\n
Dit heeft geen invloed op de levensduur van tokens of de instelling van aanmeldingsfrequentie.
\n
Hiermee wordt het beleid Optie om aangemeld te blijven weergeven in de aangepaste huisstijl genegeerd.
\n
De optie Nooit permanent overschrijft eventuele permanente claims van eenmalige aanmelding die zijn doorgegeven vanuit federatieve verificatieservices.
\n
Nooit permanent voorkomt eenmalige aanmelding op mobiele apparaten in en tussen toepassingen en de mobiele browser van de gebruiker.
\n",
+ "label": "Permanente browsersessie",
+ "never": "Nooit permanent"
+ },
+ "Warning": {
+ "allApps": "Permanente browsersessies werken alleen correct als de optie Alle cloud-apps is geselecteerd. Werk uw selectie cloud-apps bij. Klik hier voor meer informatie."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Uren of dagen",
+ "value": "Frequentie"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} dagen",
+ "singular": "1 dag"
+ },
+ "Hour": {
+ "plural": "{0} uur",
+ "singular": "1 uur"
+ },
+ "daysOption": "Dagen",
+ "everytime": "Elke keer",
+ "help": "De tijdsperiode voordat een gebruiker wordt gevraagd om zich opnieuw aan te melden als hij/zij probeert een resource te openen. De standaardinstelling is een lopende telling van 90 dagen. Dit houdt in dat gebruikers wordt gevraagd zich opnieuw te verifiëren wanneer zij voor het eerst weer proberen toegang tot een resource te krijgen nadat zij 90 dagen of langer niet actief zijn geweest op hun computer.",
+ "hoursOption": "Uren",
+ "label": "Aanmeldingsfrequentie",
+ "placeholder": "Eenheden selecteren"
+ }
+ },
+ "mainOption": "Levensduur van sessie wijzigen",
+ "mainOptionHelp": "Instellen hoe vaak gebruikers vragen worden gesteld en of browsersessies permanent zijn. Toepassingen die geen moderne verificatieprotocollen ondersteunen, voldoen mogelijk niet aan dit beleid. Neem in dergelijke gevallen contact op met de toepassingsontwikkelaar."
+ },
+ "SingleSelectorActive": {
+ "failed": "Kan deze gegevens niet laden.",
+ "reattempt": "Gegevens laden. Nieuwe poging {0} van {1}."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Directory-rollen kiezen"
+ },
+ "Excluded": {
+ "gridAria": "Lijst met uitgesloten gebruikers"
+ },
+ "Included": {
+ "gridAria": "Lijst met opgenomen gebruikers"
+ },
+ "Validation": {
+ "customRoleIncluded": "Directory-rollen bevat ten minste één aangepaste rol",
+ "customRoleSelected": "Er is ten minste één aangepaste rol geselecteerd",
+ "failed": "U moet {0} configureren",
+ "roles": "U moet ten minste één rol selecteren",
+ "usersGroups": "U moet ten minste één gebruiker of groep selecteren"
+ },
+ "learnMore": "Beheer de toegang op basis van op wie het beleid van toepassing is, zoals gebruikers en groepen, workloadidentiteiten, directoryrollen of externe gasten."
+ },
+ "advancedTabText": "Geavanceerd",
+ "allCloudAppsErrorBox": "Alle cloud-apps moet worden geselecteerd wanneer de toekenning Wachtwoordwijziging vereisen is geselecteerd",
+ "allCloudAppsReauth": "\"Alle cloud-apps\" moet worden geselecteerd wanneer sessiecontrole \"Aanmeldingsfrequentie elke keer\" en toestand \"aanmeldingsrisico\" zijn geselecteerd",
+ "allCloudOrSpecificApps": "Voor het sessiebeheer 'aanmeldingsfrequentie elke keer' moeten 'alle cloud-apps' of specifiek ondersteunde apps worden geselecteerd",
+ "allDayCheckboxLabel": "Hele dag",
+ "allDevicePlatforms": "Elk apparaat",
+ "allGuestUserInfoContent": "Omvat Microsoft Entra B2B-gasten, maar geen SharePoint B2B-gasten",
+ "allGuestUserLabel": "Alle gastgebruikers en externe gebruikers",
+ "allRiskLevelsOption": "Alle risiconiveaus",
+ "allTrustedLocationLabel": "Alle vertrouwde locaties",
+ "allUserGroupSetSelectorLabel": "Alle geselecteerde gebruikers en groepen",
+ "allUsersReauth": "Voor het sessiebesturingselement 'aanmeldingsfrequentie elke keer' moet 'Alle gebruikers' zijn geselecteerd",
+ "allUsersString": "Alle gebruikers",
+ "and": "{0} EN {1} ",
+ "andWithGrouping": "({0}) EN {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Een willekeurige cloud-app",
+ "appContextOptionInfoContent": "Aangevraagde verificatietag",
+ "appContextOptionLabel": "Aangevraagde verificatietag (preview)",
+ "appContextUriPlaceholder": "Voorbeeld: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Er zijn voor door apps gehandhaafde beperkingen mogelijk aanvullende beheerdersconfiguraties vereist in de cloud-apps. De beperkingen zijn alleen van toepassing op nieuwe sessies.",
+ "appNotSetSeletorLabel": "0 cloud-apps geselecteerd",
+ "appReauthNotSupported": "Deze app biedt geen ondersteuning voor het sessiebeheer 'elke keer aanmelden'.",
+ "applyConditionClientAppInfoBalloonContent": "Client-apps configureren om het beleid toe te passen op specifieke client-apps",
+ "applyConditionDevicePlatformInfoBalloonContent": "Apparaatplatformen configureren om het beleid toe te passen op specifieke platformen",
+ "applyConditionDeviceStateInfoBalloonContent": "Apparaatstatus configureren om het beleid toe te passen op specifieke apparaatstatussen",
+ "applyConditionLocationInfoBalloonContent": "Locaties configureren om het beleid toe te passen op vertrouwde/niet-vertrouwde locaties",
+ "applyConditionSigninRiskInfoBalloonContent": "Aanmeldingsrisico configureren om het beleid toe te passen op de geselecteerde risiconiveaus",
+ "applyConditionUserRiskInfoBalloonContent": "Gebruikersrisico configureren om het beleid toe te passen op de geselecteerde risiconiveaus",
+ "applyConditonLabel": "Configureren",
+ "ariaLabelPolicyDisabled": "Beleid is uitgeschakeld",
+ "ariaLabelPolicyEnabled": "Beleid is ingeschakeld",
+ "ariaLabelPolicyReportOnly": "Het beleid bevindt zich in de modus voor alleen rapporteren",
+ "blockAccess": "Toegang blokkeren",
+ "builtInDirectoryRoleLabel": "Ingebouwde directory-rollen",
+ "casCustomControlInfo": "Aangepaste beleidsregels moeten worden geconfigureerd in Cloud App Security-portal. Dit besturingselement werkt direct voor aanbevolen apps en kan zelfstandig worden uitgevoerd voor elke app. Klik hier voor meer informatie over beide scenario's.",
+ "casInfoBubble": "Dit besturingselement is geschikt voor verschillende cloud-apps.",
+ "casPreconfiguredControlInfo": "Dit besturingselement werkt direct voor aanbevolen apps en kan zelfstandig worden uitgevoerd voor elke app. Klik hier voor meer informatie over beide scenario's.",
+ "cert64DownloadCol": "base64-certificaat downloaden",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Certificaat downloaden",
+ "certDurationCol": "Vervaldatum",
+ "certDurationStartCol": "Geldig van",
+ "certName": "VpnCert",
+ "certainApps": "Alleen bepaalde apps worden ondersteund voor 'Aanmeldingsfrequentie elke keer' als toekenningen niet zijn geselecteerd voor 'Meervoudige verificatie vereisen' en 'Wachtwoordwijziging vereisen'",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Toepassingen kiezen",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Gekozen toepassingen",
+ "chooseApplicationsEmpty": "Geen toepassingen",
+ "chooseApplicationsNone": "Geen",
+ "chooseApplicationsNoneFound": "Kan {0} niet vinden. Probeer een andere naam of een andere id.",
+ "chooseApplicationsPlural": "{0} en nog {1}",
+ "chooseApplicationsReAuthEverytimeInfo": "Bent u op zoek naar uw app? Sommige toepassingen kunnen niet worden gebruikt met sessiebeheer 'Telkens opnieuw verificatie vereisen'",
+ "chooseApplicationsRemove": "Verwijderen",
+ "chooseApplicationsReturnedPlural": "{0} toepassingen gevonden",
+ "chooseApplicationsReturnedSingular": "1 toepassing gevonden",
+ "chooseApplicationsSearchBalloon": "Zoek naar een toepassing door de naam of de id in te voeren.",
+ "chooseApplicationsSearchHint": "Toepassingen zoeken...",
+ "chooseApplicationsSearchLabel": "Toepassingen",
+ "chooseApplicationsSearching": "Zoeken...",
+ "chooseApplicationsSelect": "Selecteren",
+ "chooseApplicationsSelected": "Geselecteerd",
+ "chooseApplicationsSingular": "{0} en nog 1",
+ "chooseApplicationsTooMany": "Meer resultaten dan kunnen worden weergegeven. Filter met behulp van het zoekvak.",
+ "chooseLocationCorpnetItem": "Bedrijfsnetwerk",
+ "chooseLocationSelectedLocationsLabel": "Geselecteerde locaties",
+ "chooseLocationTrustedIpsItem": "Vertrouwde IP-adressen voor meervoudige verificatie",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Locaties kiezen",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Gekozen locaties",
+ "chooseLocationsEmpty": "Geen locaties",
+ "chooseLocationsExcludedSelectorTitle": "Selecteren",
+ "chooseLocationsIncludedSelectorTitle": "Selecteren",
+ "chooseLocationsNone": "Geen",
+ "chooseLocationsNoneFound": "Kan {0} niet vinden. Probeer een andere naam of een andere id.",
+ "chooseLocationsPlural": "{0} en nog {1}",
+ "chooseLocationsRemove": "Verwijderen",
+ "chooseLocationsReturnedPlural": "{0} locaties gevonden",
+ "chooseLocationsReturnedSingular": "1 locatie gevonden",
+ "chooseLocationsSearchBalloon": "Zoek naar een locatie door de naam in te voeren.",
+ "chooseLocationsSearchHint": "Locaties zoeken...",
+ "chooseLocationsSearchLabel": "Locaties",
+ "chooseLocationsSearching": "Zoeken...",
+ "chooseLocationsSelect": "Selecteren",
+ "chooseLocationsSelected": "geselecteerd",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Selecteren",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Selecteren",
+ "chooseLocationsSingular": "{0} en nog 1",
+ "chooseLocationsTooMany": "Meer resultaten dan kunnen worden weergegeven. Filter met behulp van het zoekvak.",
+ "claimProviderAddCommandText": "Nieuw aangepast besturingselement",
+ "claimProviderAddNewBladeTitle": "Nieuw aangepast besturingselement",
+ "claimProviderDeleteCommand": "Verwijderen",
+ "claimProviderDeleteDescription": "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt.",
+ "claimProviderDeleteTitle": "Weet u het zeker?",
+ "claimProviderEditInfoText": "Geef de JSON voor aangepaste besturingselementen op die is verstrekt door uw claimproviders.",
+ "claimProviderNotificationCreateDescription": "Aangepast besturingselement {0} maken",
+ "claimProviderNotificationCreateFailedDescription": "Kan het aangepaste besturingselement {0} niet maken. Probeer het later opnieuw.",
+ "claimProviderNotificationCreateFailedTitle": "Kan het aangepaste besturingselement niet maken",
+ "claimProviderNotificationCreateSuccessDescription": "Het aangepaste besturingselement {0} is gemaakt",
+ "claimProviderNotificationCreateSuccessTitle": "{0} is gemaakt",
+ "claimProviderNotificationCreateTitle": "{0} maken...",
+ "claimProviderNotificationDeleteDescription": "Het aangepaste besturingselement {0} verwijderen",
+ "claimProviderNotificationDeleteFailedDescription": "Kan het aangepaste besturingselement {0} niet verwijderen. Probeer het later opnieuw.",
+ "claimProviderNotificationDeleteFailedTitle": "Kan het aangepaste besturingselement niet verwijderen",
+ "claimProviderNotificationDeleteSuccessDescription": "Het aangepaste besturingselement {0} is verwijderd",
+ "claimProviderNotificationDeleteSuccessTitle": "{0} is verwijderd",
+ "claimProviderNotificationDeleteTitle": "{0} verwijderen...",
+ "claimProviderNotificationUpdateDescription": "Het aangepaste besturingselement {0} bijwerken",
+ "claimProviderNotificationUpdateFailedDescription": "Kan het aangepaste besturingselement {0} niet bijwerken. Probeer het later opnieuw.",
+ "claimProviderNotificationUpdateFailedTitle": "Kan het aangepaste besturingselement niet bijwerken",
+ "claimProviderNotificationUpdateSuccessDescription": "Het aangepaste besturingselement {0} is bijgewerkt",
+ "claimProviderNotificationUpdateSuccessTitle": "{0} is bijgewerkt",
+ "claimProviderNotificationUpdateTitle": "{0} bijwerken...",
+ "claimProviderValidationAppIdInvalid": "De waarde AppId is ongeldig. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationClientIdMissing": "In de gegevens ontbreekt de waarde ClientId. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationControlClaimsRequestedMissing": "In het besturingselement ontbreekt de waarde ClaimsRequested. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "In het item ClaimsRequested ontbreekt de waarde Type. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationControlIdAlreadyExists": "De waarde Control Id bestaat al. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationControlIdMissing": "In het besturingselement ontbreekt de waarde Id. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "De waarde Id van het besturingselement kan niet worden verwijderd omdat ernaar wordt verwezen in een bestaand beleid. Verwijder deze eerst uit het beleid.",
+ "claimProviderValidationControlIdTooManyControls": "De eigenschap Control bevat te veel besturingselementen. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationControlIdValueReserved": "De waarde Control Id is een gereserveerd sleutelwoord. Gebruik een andere id.",
+ "claimProviderValidationControlNameAlreadyExists": "De waarde Control Name bestaat al. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationControlNameMissing": "In het besturingselement ontbreekt de waarde Name. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationControlsMissing": "In de gegevens ontbreekt de waarde Controls. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationDiscoveryUrlMissing": "In de gegevens ontbreekt de waarde DiscoveryUrl. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationInvalid": "De verstrekte gegevens zijn ongeldig. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationInvalidJsonDefinition": "Kan het aangepaste besturingselement niet opslaan. Controleer de JSON-tekst en probeer het opnieuw.",
+ "claimProviderValidationNameAlreadyExists": "De waarde Name bestaat al. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationNameMissing": "In de gegevens ontbreekt de waarde Name. Controleer dit en probeer het opnieuw.",
+ "claimProviderValidationUnknown": "Er is een onbekende fout opgetreden tijdens het valideren van de verstrekte gegevens. Controleer dit en probeer het opnieuw.",
+ "claimProvidersNone": "Geen aangepaste besturingselementen",
+ "claimProvidersSearchPlaceholder": "Zoekbesturingselementen.",
+ "classicPoilcyFilterTitle": "Weergeven",
+ "classicPolicyAllPlatforms": "Alle platformen",
+ "classicPolicyClientAppBrowserAndNative": "Browser, mobiele apps en bureaubladclients",
+ "classicPolicyCloudAppTitle": "Cloudtoepassing",
+ "classicPolicyControlAllow": "Toestaan",
+ "classicPolicyControlBlock": "Blok",
+ "classicPolicyControlBlockWhenNotAtWork": "Toegang blokkeren bij inactiviteit",
+ "classicPolicyControlRequireCompliantDevice": "Compatibel apparaat vereisen",
+ "classicPolicyControlRequireDomainJoinedDevice": "Apparaat dat is toegevoegd aan het domein vereisen",
+ "classicPolicyControlRequireMfa": "Meervoudige verificatie vereisen",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Meervoudige verificatie vereisen bij inactiviteit",
+ "classicPolicyDeleteCommand": "Verwijderen",
+ "classicPolicyDeleteFailTitle": "Kan klassiek beleid niet verwijderen",
+ "classicPolicyDeleteInProgressTitle": "Klassiek beleid verwijderen",
+ "classicPolicyDeleteSuccessTitle": "Klassiek beleid verwijderd",
+ "classicPolicyDetailBladeTitle": "Details",
+ "classicPolicyDisableCommand": "Uitschakelen",
+ "classicPolicyDisableConfirmation": "Weet u zeker dat u {0} wilt uitschakelen? Deze bewerking kan niet ongedaan worden gemaakt.",
+ "classicPolicyDisableFailDescription": "Kan {0} niet uitschakelen",
+ "classicPolicyDisableFailTitle": "Kan klassiek beleid niet uitschakelen",
+ "classicPolicyDisableInProgressDescription": "{0} uitschakelen",
+ "classicPolicyDisableInProgressTitle": "Klassiek beleid uitschakelen",
+ "classicPolicyDisableSuccessDescription": "{0} is uitgeschakeld",
+ "classicPolicyDisableSuccessTitle": "Klassiek beleid is uitgeschakeld",
+ "classicPolicyEasSupportedPlatforms": "Ondersteunde platformen voor Exchange ActiveSync",
+ "classicPolicyEasUnsupportedPlatforms": "Niet-ondersteunde platformen voor Exchange ActiveSync",
+ "classicPolicyExcludedPlatformsTitle": "Uitgesloten apparaatplatformen",
+ "classicPolicyFilterAll": "Alle beleidsregels",
+ "classicPolicyFilterDisabled": "Uitgeschakelde beleidsregels",
+ "classicPolicyFilterEnabled": "Ingeschakelde beleidsregels",
+ "classicPolicyIncludeExcludeMembersDescription": "Door groepen uit te sluiten kunt u een gefaseerde migratie van beleidsregels uitvoeren.",
+ "classicPolicyIncludeExcludeMembersTitle": "Groepen opnemen/uitsluiten",
+ "classicPolicyIncludedPlatformsTitle": "Opgenomen apparaatplatformen",
+ "classicPolicyManualMigrationMessage": "Dit beleid moet handmatig worden gemigreerd.",
+ "classicPolicyMigrateCommand": "Migreren",
+ "classicPolicyMigrateConfirmation": "Weet u zeker dat u {0} wilt migreren? Dit beleid kan slechts eenmaal worden gemigreerd.",
+ "classicPolicyMigrateFailDescription": "Kan {0} niet migreren",
+ "classicPolicyMigrateFailTitle": "Kan klassiek beleid niet migreren",
+ "classicPolicyMigrateInProgressDescription": "{0} migreren",
+ "classicPolicyMigrateInProgressTitle": "Klassiek beleid migreren",
+ "classicPolicyMigrateRecommendText": "Aanbeveling: migreren naar het nieuwe Azure Portal-beleid.",
+ "classicPolicyMigrateSuccessTitle": "Klassiek beleid gemigreerd",
+ "classicPolicyMigratedSuccessDescription": "Dit klassieke beleid kan nu worden beheerd onder Beleid.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "Dit klassieke beleid is gemigreerd als nieuw {0}-beleid. Nieuw beleid kan worden beheerd onder Beleid.",
+ "classicPolicyNoEditPermissionMsg": "U bent niet gemachtigd om dit beleid te bewerken. Alleen globale beheerders en beveiligingsbeheerders mogen het beleid bewerken. Klik hier voor meer informatie.",
+ "classicPolicySaveFailDescription": "Kan {0} niet opslaan",
+ "classicPolicySaveFailTitle": "Kan klassiek beleid niet opslaan",
+ "classicPolicySaveInProgressDescription": "{0} opslaan",
+ "classicPolicySaveInProgressTitle": "Klassiek beleid opslaan",
+ "classicPolicySaveSuccessDescription": "{0} is opgeslagen",
+ "classicPolicySaveSuccessTitle": "Klassiek beleid opgeslagen",
+ "clientAppBladeLegacyInfoBanner": "Verificatie op basis van verouderde gegevens wordt momenteel niet ondersteund",
+ "clientAppBladeLegacyUpsellBanner": "Niet-ondersteunde client-apps blokkeren (preview)",
+ "clientAppBladeTitle": "Client-apps",
+ "clientAppDescription": "De client-apps selecteren waarop dit beleid van toepassing is",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync biedt momenteel geen ondersteuning voor alle andere voorwaarden",
+ "clientAppLearnMore": "Beheer gebruikerstoegang om u op specifieke clienttoepassingen te richten zonder moderne verificatie te gebruiken.",
+ "clientAppLegacyHeader": "Clients met verouderde verificatie",
+ "clientAppMobileDesktop": "Mobiele apps en bureaubladclients",
+ "clientAppModernHeader": "Moderne verificatieclients",
+ "clientAppOnlySupportedPlatforms": "Het beleid toepassen op ondersteunde platformen",
+ "clientAppSelectSpecificClientApps": "Client-apps selecteren",
+ "clientAppWebBrowser": "Browser",
+ "clientAppsSelectedLabel": "{0} opgenomen",
+ "clientTypeBrowser": "Browser",
+ "clientTypeEas": "Exchange ActiveSync-clients",
+ "clientTypeEasInfo": "Exchange ActiveSync-clients die alleen verouderde verificatie gebruiken.",
+ "clientTypeModernAuth": "Moderne verificatieclients",
+ "clientTypeOtherClients": "Andere clients",
+ "clientTypeOtherClientsInfo": "Dit omvat de oudere Office-clients en andere e-mailprotocollen (POP, IMAP, SMTP enzovoort). [Meer informatie][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "{0} cloud-apps die is/zijn geconfigureerd in dit beleid, is/zijn uit de map verwijderd, maar dit heeft geen invloed op de andere apps in het beleid. De volgende keer dat u de toepassingssectie van het beleid bijwerkt, worden de verwijderde apps automatisch verwijderd.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Alle Microsoft-apps",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Cloud-, desktop- en mobiele apps van Microsoft toestaan (preview)",
+ "cloudappsSelectionBladeAllCloudapps": "Alle cloud-apps",
+ "cloudappsSelectionBladeExcludeDescription": "De cloud-apps selecteren die van het beleid moeten worden uitgesloten",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Uitgesloten cloud-apps selecteren",
+ "cloudappsSelectionBladeIncludeDescription": "De cloud-apps selecteren waarop dit beleid van toepassing is",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Selecteren",
+ "cloudappsSelectionBladeSelectedCloudapps": "Apps selecteren",
+ "cloudappsSelectorInfoBallonText": "Services waarmee de gebruiker werkzaamheden uitvoert, bijvoorbeeld Salesforce",
+ "cloudappsSelectorPluralExcluded": "{0} apps uitgesloten",
+ "cloudappsSelectorPluralIncluded": "{0} apps inbegrepen",
+ "cloudappsSelectorSingularExcluded": "1 app uitgesloten",
+ "cloudappsSelectorSingularIncluded": "1 app inbegrepen",
+ "cloudappsSelectorUserPlural": "{0} apps",
+ "cloudappsSelectorUserSingular": "1 app",
+ "conditionLabelMulti": "{0} voorwaarden geselecteerd",
+ "conditionLabelOne": "1 voorwaarde geselecteerd",
+ "conditionalAccessBladeTitle": "Voorwaardelijke toegang",
+ "conditionsNotSelectedLabel": "Niet geconfigureerd",
+ "conditionsReqMfaReauthSet": "Sommige opties zijn niet beschikbaar vanwege de momenteel geselecteerde toekenning 'Meervoudige verificatie vereisen' en sessiecontrole 'Aanmeldingsfrequentie elke keer'",
+ "conditionsReqPwSet": "Een aantal opties is niet beschikbaar omdat de toekenning Wachtwoordwijziging vereisen momenteel is geselecteerd",
+ "configureCasText": "Cloud App Security configureren",
+ "configureCustomControlsText": "Aangepast beleid configureren",
+ "controlLabelMulti": "{0} besturingselementen geselecteerd",
+ "controlLabelOne": "1 besturingselement geselecteerd",
+ "controlValidatorText": "Selecteer minstens één besturingselement",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Meer informatie over het vereisen van compatibele apparaten.",
+ "controlsDeviceComplianceInfoBubble": "Het apparaat moet compatibel zijn met Intune. Als het apparaat niet compatibel is, wordt de gebruiker gevraagd de nalevingsprocedure uit te voeren.",
+ "controlsDomainJoinedAriaLabel": "Meer informatie over het vereisen van apparaten die aan hybride Microsoft Entra zijn gekoppeld.",
+ "controlsDomainJoinedInfoBubble": "Apparaten moeten zijn samengevoegd met hybride Microsoft Entra.",
+ "controlsMamAriaLabel": "Meer informatie over het vereisen van goedgekeurde clienttoepassingen.",
+ "controlsMamInfoBubble": "Op het apparaat moeten deze goedgekeurde clienttoepassingen worden gebruikt.",
+ "controlsMfaInfoBubble": "De gebruiker moet voldoen aan aanvullende beveiligingsvereisten, bijvoorbeeld via een telefoongesprek of sms-bericht",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Meer informatie over het vereisen van door beleid beveiligde apps.",
+ "controlsRequireCompliantAppInfoBubble": "Apparaat moet met beleid beveiligde apps gebruiken.",
+ "controlsRequirePasswordResetAriaLabel": "Meer informatie over het vereisen van een wachtwoordwijziging.",
+ "controlsRequirePasswordResetInfoBubble": "Een wachtwoordwijziging vereisen om het gebruikersrisico te verlagen. Voor deze optie is bovendien meervoudige verificatie vereist. Andere besturingselementen kunnen niet worden gebruikt.",
+ "countriesRadiobuttonInfoBalloonContent": "Het land/de regio waaruit een aanmelding afkomstig is, wordt bepaald door het IP-adres van de gebruiker.",
+ "createNewVpnCert": "Nieuw certificaat",
+ "createdTimeLabel": "Aanmaaktijd",
+ "customRoleLabel": "Aangepaste rollen (niet ondersteund)",
+ "dateRangeTypeLabel": "Datumbereik",
+ "daysOfWeekPlaceholderText": "Dagen van de week filteren",
+ "daysOfWeekTypeLabel": "Dagen van de week",
+ "deletePolicyNoLicenseText": "U kunt dit beleid nu verwijderen. Als het is verwijderd, kun u het niet opnieuw maken totdat u beschikt over de vereiste licenties.",
+ "descriptionContentForControlsAndOr": "Voor meerdere besturingselementen",
+ "devicePlatform": "Apparaatplatform",
+ "devicePlatformConditionHelpDescription": "Beleid toepassen op de geselecteerde apparaatplatformen.\n[Meer informatie][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} opgenomen",
+ "devicePlatformIncludeExclude": "{0} en {1} uitgesloten",
+ "devicePlatformNoSelectionError": "Voor het selecteren van apparaatplatformen moet één subitem worden geselecteerd.",
+ "devicePlatformsNone": "Geen",
+ "deviceSelectionBladeExcludeDescription": "De platformen selecteren die van het beleid moeten worden uitgesloten",
+ "deviceSelectionBladeIncludeDescription": "De apparaatplatformen selecteren die in dit beleid moeten worden opgenomen",
+ "deviceStateAll": "Status Alle apparaten",
+ "deviceStateCompliant": "Gemarkeerd als compatibel apparaat",
+ "deviceStateCompliantInfoContent": "Apparaten die compatibel met Intune zijn, worden uitgesloten van de evaluatie van dit beleid. Als het beleid dus bijvoorbeeld de toegang blokkeert, worden alle apparaten die compatibel zijn met Intune geblokkeerd.",
+ "deviceStateConditionConfigureInfoContent": "Beleid configureren op basis van de apparaatstatus",
+ "deviceStateConditionSelectorInfoContent": "Of het apparaat van waaruit de gebruiker zich aanmeldt, 'met hybride Microsoft Entra toegevoegd' of 'gemarkeerd als conform' is.\n Dit is afgeschaft. Gebruik in plaats daarvan {1}.",
+ "deviceStateConditionSelectorLabel": "Apparaatstatus (afgeschaft)",
+ "deviceStateDomainJoined": "Apparaat is met hybride Microsoft Entra toegevoegd",
+ "deviceStateDomainJoinedInfoContent": "Apparaten die met hybride Microsoft Entra zijn samengevoegd, worden uitgesloten van de evaluatie van dit beleid. Als het beleid dus bijvoorbeeld de toegang blokkeert, worden alle apparaten geblokkeerd, behalve apparaten die met hybride Microsoft Entra zijn samengevoegd.",
+ "deviceStateDomainJoinedInfoLinkText": "Meer informatie.",
+ "deviceStateExcludeDescription": "De apparaatstatusvoorwaarde selecteren die wordt gebruikt om apparaten van het beleid uit te sluiten.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} en {1} uitsluiten",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} en {1}, {2} uitsluiten",
+ "directoryRoleInfoContent": "Beleid toewijzen aan ingebouwde directory-rollen.",
+ "directoryRolesLabel": "Directory-rollen",
+ "discardbutton": "Verwijderen",
+ "downloadDefaultFileName": "IP-bereiken",
+ "downloadExampleFileName": "Voorbeeld",
+ "downloadExampleHeader": "Dit is een voorbeeldbestand waarin u kunt zien wat voor soort gegevens kunnen worden geaccepteerd. Regels die beginnen met # worden genegeerd.",
+ "duplicate": "Dupliceren",
+ "duplicatePolicyName": "{0} KOPIËREN",
+ "endDatePickerLabel": "Eindigt op",
+ "endTimePickerLabel": "Eindtijd",
+ "enterCountryText": "IP-adres en land/regio worden als paar geëvalueerd. Selecteer het land.",
+ "enterIpText": "IP-adres en land/regio worden als paar geëvalueerd. Voer het IP-adres in.",
+ "enterUserText": "Er is geen gebruiker geselecteerd. Selecteer een gebruiker.",
+ "evaluationResult": "Resultaat van de evaluatie",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Alleen Exchange ActiveSync met ondersteunde platformen",
+ "excludeAllTrustedLocationSelectorText": "alle vertrouwde locaties",
+ "featureRequiresP2": "Voor deze functie is een Microsoft Entra ID P2-licentie vereist.",
+ "friday": "vrijdag",
+ "grantControls": "Besturingselementen toekennen",
+ "gridNetworkTrusted": "Vertrouwd",
+ "gridPolicyCreatedDateTime": "Aanmaakdatum",
+ "gridPolicyEnabled": "Ingeschakeld",
+ "gridPolicyModifiedDateTime": "Gewijzigd op",
+ "gridPolicyName": "Beleidsnaam",
+ "gridPolicyState": "Status",
+ "groupSelectionBladeExcludeDescription": "De groepen selecteren die van het beleid zijn uitgesloten",
+ "groupSelectionBladeExcludedSelectorTitle": "Uitgesloten groepen selecteren",
+ "groupSelectionBladeSelect": "Groepen selecteren",
+ "groupSelectorInfoBallonText": "Groepen in de map waarop het beleid van toepassing is, bijvoorbeeld Testfasegroep",
+ "groupsSelectionBladeTitle": "Groepen",
+ "helpCommonScenariosText": "Geïnteresseerd in veelvoorkomende scenario's?",
+ "helpCondition1": "Wanneer een gebruiker zich buiten het netwerk van het bedrijf bevindt",
+ "helpCondition2": "Wanneer gebruikers in de groep Beheerders zich aanmelden",
+ "helpConditionsTitle": "Voorwaarden",
+ "helpControl1": "Ze moeten zich aanmelden met meervoudige verificatie",
+ "helpControl2": "Deze moeten gebruik maken van een apparaat dat conform Intune is of onderdeel van een domein is",
+ "helpControlsTitle": "Besturingselementen",
+ "helpIntroText": "Met voorwaardelijke toegang kunt u in specifieke omstandigheden toegangsvereisten afdwingen. Hier volgen enkele voorbeelden",
+ "helpIntroTitle": "Wat is voorwaardelijke toegang?",
+ "helpLearnMoreText": "Wilt u meer informatie over voorwaardelijke toegang?",
+ "helpStartStep1": "Maak uw eerste beleid door op + Nieuw beleid te klikken",
+ "helpStartStep2": "Geef beleidsvoorwaarden en -besturingselementen op",
+ "helpStartStep3": "Wanneer u klaar bent, klikt u op Beleid inschakelen en op Maken",
+ "helpStartTitle": "Aan de slag",
+ "highRisk": "Hoog",
+ "includeAndExcludeAppsTextFormat": "Opnemen: {0}. Uitsluiten: {1}.",
+ "includeAppsTextFormat": "Opnemen: {0}",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Onbekende gebieden zijn IP-adressen die niet kunnen worden toegewezen aan een land/regio.",
+ "includeUnknownAreasCheckboxLabel": "Onbekende gebieden opnemen",
+ "infoCommandLabel": "Info",
+ "invalidCertDuration": "Ongeldige certificaatduur",
+ "invalidIpAddress": "De waarde moet een geldig IP-adres zijn",
+ "invalidReAuthSignInRiskOptionSelected": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' staat de selectie 'geen risico' in het besturingselement voor aanmeldingsrisico's niet toe.",
+ "invalidUriErrorMsg": "Voer een geldige URI in. Bijvoorbeeld: uri:contoso.com:acr",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Alles laden",
+ "loading": "Laden...",
+ "locationConfigureNamedLocationsText": "Alle vertrouwde locaties configureren",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "De locatienaam is te lang. U kunt maximaal 256 tekens gebruiken",
+ "locationSelectionBladeExcludeDescription": "De locaties selecteren die van het beleid moeten worden uitgesloten",
+ "locationSelectionBladeIncludeDescription": "De locaties selecteren die in dit beleid moeten worden opgenomen",
+ "locationsAllLocationsLabel": "Elke locatie",
+ "locationsAllNamedLocationsLabel": "Alle vertrouwde IP-adressen",
+ "locationsAllPrivateLinksLabel": "Alle persoonlijke koppelingen in mijn tenant",
+ "locationsIncludeExcludeLabel": "{0} en alle vertrouwde IP-adressen uitsluiten",
+ "locationsSelectedPrivateLinksLabel": "Geselecteerde persoonlijke koppelingen",
+ "lowRisk": "Laag",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "Uw organisatie heeft Microsoft Entra ID P1 of P2 nodig voor het beheren van beleid voor voorwaardelijke toegang.",
+ "manageSecurityDefaultsAriaLabel": "Standaardinstellingen voor beveiliging beheren.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Met het aanmelden vanaf een vertrouwde locatie wordt het aanmeldingsrisico van een gebruiker verlaagd. Markeer deze locatie alleen als vertrouwd als u er zeker van bent dat de IP-bereiken bekend en betrouwbaar zijn in uw organisatie.",
+ "markAsTrustedCheckboxLabel": "Als vertrouwde locatie markeren",
+ "mediumRisk": "Gemiddeld",
+ "memberSelectionCommandRemove": "Verwijderen",
+ "menuItemClaimProviderControls": "Aangepaste besturingselementen (preview)",
+ "menuItemClassicPolicies": "Klassieke beleidsregels",
+ "menuItemInsightsAndReporting": "Inzichten en rapportage",
+ "menuItemManage": "Beheren",
+ "menuItemNamedLocationsPreview": "Benoemde locaties (preview-versie)",
+ "menuItemNamedNetworks": "Benoemde locaties",
+ "menuItemPolicies": "Beleidsregels",
+ "menuItemTermsOfUse": "Gebruiksvoorwaarden",
+ "modifiedTimeLabel": "Tijd gewijzigd",
+ "monday": "maandag",
+ "nameLabel": "Naam",
+ "namedLocationCountryInfoBanner": "Alleen IPv4-adressen worden aan landen/regio's toegewezen. IPv6-adressen zijn opgenomen in onbekende landen/regio's.",
+ "namedLocationTypeCountry": "Landen/regio's",
+ "namedLocationTypeLabel": "De locatie definiëren met het volgende:",
+ "namedLocationUpsellBanner": "Deze weergave is afgeschaft. Ga naar de nieuwe en verbeterde weergave 'Benoemde locaties'.",
+ "namedLocationsHelpDescription": "Benoemde locaties worden voor Microsoft Entra ID-beveiligingsrapporten gebruikt om het aantal fout-positieven te verminderen en voor het Microsoft Entra-beleid voor voorwaardelijke toegang.\n[Meer informatie][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Een nieuw IP-bereik toevoegen (bijvoorbeeld 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "U moet ten minste één land/regio selecteren",
+ "namedNetworkDeleteCommand": "Verwijderen",
+ "namedNetworkDeleteDescription": "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt.",
+ "namedNetworkDeleteTitle": "Weet u het zeker?",
+ "namedNetworkDownloadIpRange": "Downloaden",
+ "namedNetworkInvalidRange": "De waarde moet een geldig IP-bereik zijn.",
+ "namedNetworkIpRangeNeeded": "U hebt ten minste één geldig IP-bereik nodig",
+ "namedNetworkIpRangesDescriptionContent": "Configureer de IP-adresbereiken van uw organisatie",
+ "namedNetworkIpRangesTab": "IP-bereiken",
+ "namedNetworkListAdd": "Nieuwe locatie",
+ "namedNetworkListConfigureTrustedIps": "Vertrouwde IP-adressen voor meervoudige verificatie configureren",
+ "namedNetworkNameDescription": "Bijvoorbeeld: Kantoor in Redmond",
+ "namedNetworkNameInvalid": "De opgegeven naam is ongeldig.",
+ "namedNetworkNameRequired": "U moet een naam opgeven voor deze locatie.",
+ "namedNetworkNoIpRanges": "Geen IP-bereiken",
+ "namedNetworkNotificationCreateDescription": "De locatie {0} wordt gemaakt",
+ "namedNetworkNotificationCreateFailedDescription": "Kan de locatie {0} niet maken. Probeer het later opnieuw.",
+ "namedNetworkNotificationCreateFailedTitle": "Kan de locatie niet maken",
+ "namedNetworkNotificationCreateSuccessDescription": "De locatie {0} is gemaakt",
+ "namedNetworkNotificationCreateSuccessTitle": "{0} is gemaakt",
+ "namedNetworkNotificationCreateTitle": "{0} maken...",
+ "namedNetworkNotificationDeleteDescription": "De locatie {0} wordt verwijderd",
+ "namedNetworkNotificationDeleteFailedDescription": "Kan de locatie {0} niet verwijderen. Probeer het later opnieuw.",
+ "namedNetworkNotificationDeleteFailedTitle": "Kan de locatie niet verwijderen",
+ "namedNetworkNotificationDeleteSuccessDescription": "De locatie {0} is verwijderd",
+ "namedNetworkNotificationDeleteSuccessTitle": "{0} is verwijderd",
+ "namedNetworkNotificationDeleteTitle": "{0} verwijderen...",
+ "namedNetworkNotificationUpdateDescription": "De locatie {0} wordt bijgewerkt",
+ "namedNetworkNotificationUpdateFailedDescription": "Kan de locatie {0} niet bijwerken. Probeer het later opnieuw.",
+ "namedNetworkNotificationUpdateFailedTitle": "Kan de locatie niet bijwerken",
+ "namedNetworkNotificationUpdateSuccessDescription": "De locatie {0} is bijgewerkt",
+ "namedNetworkNotificationUpdateSuccessTitle": "{0} is bijgewerkt",
+ "namedNetworkNotificationUpdateTitle": "{0} bijwerken...",
+ "namedNetworkSearchPlaceholder": "Locaties zoeken.",
+ "namedNetworkUploadFailedDescription": "Er is een fout opgetreden bij het parseren van het opgegeven bestand. Zorg ervoor dat u een bestand zonder opmaak en met alle regels in CIDR-indeling uploadt.",
+ "namedNetworkUploadFailedTitle": "Kan {0} niet parseren",
+ "namedNetworkUploadInProgressDescription": "Er wordt geprobeerd geldige CIDR-waarden uit {0} te parseren.",
+ "namedNetworkUploadInProgressTitle": "{0} parseren",
+ "namedNetworkUploadInvalidDescription": "{0} is te groot of heeft een ongeldige indeling.",
+ "namedNetworkUploadInvalidTitle": "{0} is ongeldig",
+ "namedNetworkUploadIpRange": "Uploaden",
+ "namedNetworkUploadSuccessDescription": "Er zijn {0} regels geanalyseerd. {1} met een verkeerde indeling. {2} overgeslagen.",
+ "namedNetworkUploadSuccessTitle": "Parseren van {0} is voltooid",
+ "namedNetworksAdd": "Nieuwe benoemde locatie",
+ "namedNetworksConditionHelpDescription": "Gebruikerstoegang beheren op basis van de fysieke locatie.\n[Meer informatie][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} en {1} uitgesloten",
+ "namedNetworksHelpDescription": "Benoemde locaties worden voor Microsoft Entra ID-beveiligingsrapporten gebruikt om het aantal fout-positieven te verminderen en voor het Microsoft Entra-beleid voor voorwaardelijke toegang.\n[Meer informatie][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} opgenomen",
+ "namedNetworksNone": "Kan geen benoemde locaties vinden.",
+ "namedNetworksTitle": "Locaties configureren",
+ "namednetworkExceedingSizeErrorBladeTitle": "Details van fout",
+ "namednetworkExceedingSizeErrorDetailText": "Klik hier voor meer details.",
+ "namednetworkExceedingSizeErrorMessage": "U hebt de maximale toegestane opslag voor benoemde locaties overschreden. Probeer het opnieuw met een kortere lijst. Klik hier voor meer informatie.",
+ "needMfaSecondary": "'Meervoudige verificatie vereisen' moet worden geselecteerd wanneer 'Aanmeldingsfrequentie elke keer' is geselecteerd met 'Alleen secundaire verificatiemethoden'",
+ "needMfaSpecificApps": "Voor het sessiebeheer 'aanmeldingsfrequentie elke keer' is het toekenningsbeheer 'Meervoudige verificatie vereisen' vereist wanneer specifiek ondersteunde apps worden geselecteerd",
+ "newCertName": "nieuw certificaat",
+ "noAttributePermissionsError": "Onvoldoende bevoegdheden om beleid te maken of bij te werken. De rol van kenmerkdefinitielezer is vereist om dynamische filters toe te voegen of te bewerken.",
+ "noPolicyRowMessage": "Geen beleidsregels",
+ "noSPSelected": "Er is geen service-principal geselecteerd",
+ "noUpdatePermissionMessage": "U hebt geen machtigingen om deze instellingen bij te werken. Neem contact op met de globale beheerder om toegang aan te vragen.",
+ "noUserSelected": "Geen gebruiker geselecteerd",
+ "noneRisk": "Geen risico",
+ "office365Description": "Deze apps omvatten onder meer Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online en Office 365 Yammer.",
+ "office365InfoBox": "Ten minste één van de geselecteerde apps is onderdeel van Office 365. U kunt het beste in plaats hiervan het beleid instellen voor de Office 365-app.",
+ "oneUserSelected": "1 gebruiker geselecteerd",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Alleen globale beheerders kunnen dit beleid opslaan.",
+ "or": "{0} OF {1} ",
+ "pickerDoneCommand": "Gereed",
+ "policiesBladeAdPremiumUpsellBannerText": "Maak uw eigen beleid en richt u op specifieke voorwaarden, zoals cloud-apps, aanmeldingsrisico's en apparaatplatforms met Microsoft Entra ID Premium",
+ "policiesBladeTitle": "Beleidsregels",
+ "policiesBladeTitleWithAppName": "Beleid: {0}",
+ "policiesDisabledBannerText": "Het maken en bewerken van beleid is niet toegestaan voor toepassingen waaraan een aanmeldingskenmerk is gekoppeld.",
+ "policiesHitMaxLimitStatusBarMessage": "U hebt het maximale aantal beleidsregels voor deze tenant bereikt. Verwijder enkele beleidsregels voordat u er meer maakt.",
+ "policyAssignmentsSection": "Toewijzingen",
+ "policyBlockAllInfoBox": "Het geconfigureerde beleid blokkeert alle gebruikers, dus dit wordt niet ondersteund. Controleer de toewijzingen en besturingselementen. Sluit de huidige gebruiker {0} uit als u dit beleid wilt opslaan.",
+ "policyCloudAppsDisplayTextAllApp": "Alle apps",
+ "policyCloudAppsLabel": "Cloud-apps",
+ "policyConditionClientAppDescription": "Software die de gebruiker implementeert voor toegang tot de cloud-app, bijvoorbeeld Browser",
+ "policyConditionClientAppV2Description": "Software die de gebruiker implementeert voor toegang tot de cloud-app, bijvoorbeeld Browser",
+ "policyConditionDevicePlatform": "Apparaatplatformen",
+ "policyConditionDevicePlatformDescription": "Platform waarmee de gebruiker zich aanmeldt, bijvoorbeeld iOS",
+ "policyConditionLocation": "Locaties",
+ "policyConditionLocationDescription": "Locatie (bepaald op basis van IP-adresbereik) waarvandaan de gebruiker zich aanmeldt",
+ "policyConditionLocationPreview": "Locaties (preview)",
+ "policyConditionSigninRisk": "Aanmeldingsrisico",
+ "policyConditionSigninRiskDescription": "De kans dat iemand anders dan de gebruiker zich probeert aan te melden. Het risiconiveau kan hoog, gemiddeld of laag zijn. Hiervoor is een Microsoft Entra ID P2-licentie vereist.",
+ "policyConditionUserRisk": "Gebruikersrisico",
+ "policyConditionUserRiskDescription": "Gebruikersrisiconiveaus configureren die nodig zijn om beleid af te dwingen",
+ "policyConditioniClientApp": "Client-apps",
+ "policyControlAllowAccessDisplayedName": "Toegang verlenen",
+ "policyControlAuthenticationStrengthDisplayedName": "Verificatiesterkte vereisen (preview)",
+ "policyControlBladeTitle": "Verlenen",
+ "policyControlBlockAccessDisplayedName": "Toegang blokkeren",
+ "policyControlCompliantDeviceDisplayedName": "Vereisen dat het apparaat moet worden gemarkeerd als compatibel",
+ "policyControlContentDescription": "Het afdwingen van toegang beheren om toegang te blokkeren of te verlenen.",
+ "policyControlInfoBallonText": "Toegang blokkeren of aanvullende vereisten selecteren waaraan moet worden voldaan voordat toegang wordt verleend",
+ "policyControlMfaChallengeDisplayedName": "Meervoudige verificatie vereisen",
+ "policyControlRequireCompliantAppDisplayedName": "Beleid voor app-beveiliging vereisen",
+ "policyControlRequireDomainJoinedDisplayedName": "Vereisen dat apparaten zijn samengevoegd met hybride Microsoft Entra",
+ "policyControlRequireMamDisplayedName": "Goedgekeurde client-apps vereisen",
+ "policyControlRequiredPasswordChangeDisplayedName": "Wachtwoordwijziging vereisen",
+ "policyControlSelectAuthStrength": "Verificatiesterkte vereisen",
+ "policyControlsNoControlsSelected": "0 besturingselementen geselecteerd",
+ "policyControlsSection": "Besturingselementen voor toegang",
+ "policyCreatBladeTitle": "Nieuw",
+ "policyCreateButton": "Maken",
+ "policyCreateFailedMessage": "Fout: {0}",
+ "policyCreateFailedTitle": "Kan {0} niet maken",
+ "policyCreateInProgressTitle": "{0} maken...",
+ "policyCreateSuccessMessage": "{0} is gemaakt. Het beleid wordt over enkele minuten ingeschakeld als u Beleid inschakelen hebt ingesteld op Aan.",
+ "policyCreateSuccessTitle": "{0} is gemaakt",
+ "policyDeleteConfirmation": "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt.",
+ "policyDeleteFailTitle": "Kan {0} niet verwijderen",
+ "policyDeleteInProgressTitle": "{0} verwijderen...",
+ "policyDeleteSuccessTitle": "{0} is verwijderd",
+ "policyEnforceLabel": "Beleid inschakelen",
+ "policyErrorCannotSetSigninRisk": "U beschikt niet over de benodigde machtigingen om een beleid met een voorwaarde voor aanmeldingsrisico op te slaan.",
+ "policyErrorNoPermission": "U beschikt niet over de benodigde machtiging om het beleid op te slaan. Neem contact op met de globale beheerder.",
+ "policyErrorUnknown": "Er is iets fout gegaan. Probeer het later opnieuw.",
+ "policyFallbackWarningMessage": "Kan {0} niet maken of bijwerken met Microsoft Graph, wat resulteert in een terugval naar AD Graph. Onderzoek het volgende scenario omdat er waarschijnlijk een fout optreedt bij het aanroepen van het beleidseindpunt voor Microsoft Graph met een incompatibele voorwaarde.",
+ "policyFallbackWarningTitle": "{0} maken of bijwerken is gedeeltelijk voltooid",
+ "policyNameCannotBeEmpty": "De naam van het beleid mag niet leeg zijn",
+ "policyNameDevice": "Apparaatbeleid",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Mobile App Management-beleid",
+ "policyNameMfaLocation": "Meervoudige verificatie en locatiebeleid",
+ "policyNamePlaceholderText": "Bijvoorbeeld: App-beleid voor apparaatcompatibiliteit",
+ "policyNameTooLongError": "De beleidsnaam is te lang. U kunt maximaal 256 tekens gebruiken.",
+ "policyOff": "Uit",
+ "policyOn": "Aan",
+ "policyReportOnly": "Alleen rapporteren",
+ "policyReviewSection": "Beoordelen",
+ "policySaveButton": "Opslaan",
+ "policyStatusIconDescription": "Beleid ingeschakeld",
+ "policyStatusIconEnabled": "Ingeschakeld statuspictogram",
+ "policyTemplateName1": "Door apps gehandhaafde beperkingen gebruiken voor browsertoegang van {0}",
+ "policyTemplateName2": "Alleen toegang tot beheerde apparaten toestaan voor {0}",
+ "policyTemplateName3": "Het beleid is gemigreerd van instellingen van Continue toegangsevaluatie",
+ "policyTriggerRiskSpecific": "Specifiek risiconiveau selecteren",
+ "policyTriggersInfoBalloonText": "Voorwaarden waarmee wordt gedefinieerd wanneer het beleid van toepassing is, bijvoorbeeld locatie",
+ "policyTriggersNoConditionsSelected": "0 voorwaarden geselecteerd",
+ "policyTriggersSelectorLabel": "Voorwaarden",
+ "policyUpdateFailedMessage": "Fout: {0}",
+ "policyUpdateFailedTitle": "Kan {0} niet bijwerken",
+ "policyUpdateInProgressTitle": "{0} bijwerken",
+ "policyUpdateSuccessMessage": "{0} is bijgewerkt. Het beleid wordt over enkele minuten ingeschakeld als u Beleid inschakelen hebt ingesteld op Aan.",
+ "policyUpdateSuccessTitle": "{0} is bijgewerkt",
+ "primaryCol": "Primair",
+ "privateLinkLabel": "Microsoft Entra Private Link",
+ "reportOnlyInfoBox": "Modus voor alleen rapporteren: beleidsregels worden geëvalueerd en geregistreerd tijdens aanmelden, maar dit heeft geen impact voor gebruikers.",
+ "requireAllControlsText": "Alle geselecteerde besturingselementen vereisen",
+ "requireCompliantDevice": "Compatibel apparaat vereisen",
+ "requireDomainJoined": "Aan domein toegevoegd apparaat vereisen",
+ "requireGrantReauth": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' vereist meervoudige verificatie of 'wachtwoordwijziging vereisen' wanneer 'Alle cloud-apps' is geselecteerd",
+ "requireMFA": "Meervoudige verificatie vereisen",
+ "requireMfaReauth": "Voor het sessiebeheer 'aanmeldingsfrequentie elke keer' is het toekenningsbeheer 'meervoudige verificatie vereisen' vereist voor 'aanmeldingsrisico'",
+ "requireOneControlText": "Een van de geselecteerde besturingselementen vereisen",
+ "requirePasswordChangeReauth": "Voor het sessiebeheer 'aanmeldingsfrequentie elke keer' is de toekenningsbesturing 'wachtwoordwijziging vereisen' vereist voor 'gebruikersrisico'",
+ "requireRiskReauth": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' vereist het sessiebeheer 'gebruikersrisico' of 'aanmeldingsrisico' wanneer 'alle cloud-apps' is geselecteerd.",
+ "requireRiskReauthRiskNotEnabled": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' is niet beschikbaar wanneer 'alle cloud-apps' is geselecteerd.",
+ "requireRiskReauthSignInOnly": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' vereist het sessiebeheer 'aanmeldingsrisico' wanneer 'alle cloud-apps' is geselecteerd.",
+ "requireRiskReauthUserOnly": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' vereist het sessiebeheer 'gebruikersrisico' wanneer 'alle cloud-apps' is geselecteerd.",
+ "resetFilters": "Filters opnieuw instellen",
+ "sPRequired": "Service-principal vereist",
+ "sPSelectorInfoBalloon": "De gebruiker of service-principal die u wilt testen",
+ "saturday": "zaterdag",
+ "searchTextTooLongError": "De zoektekst is te lang. Het maximum is 256 tekens",
+ "securityDefaultsPolicyName": "Standaardinstellingen voor beveiliging",
+ "securityDefaultsTextMessage": "Standaardinstellingen voor beveiliging moeten zijn uitgeschakeld om beleid voor voorwaardelijke toegang in te schakelen.",
+ "securityDefaultsUpdateInProgressText": "Er wordt een standaardupdate voor beveiliging uitgevoerd. Wacht even en probeer het opnieuw.",
+ "securityDefaultsWarningMessage": "U gaat nu de beveiligingsconfiguraties van uw organisatie beheren. Goed hoor! U moet eerst de {0}standaardinstellingen voor beveiliging uitschakelen{0} voordat u een beleid voor voorwaardelijke toegang inschakelt.",
+ "selectDevicePlatforms": "Apparaatplatformen selecteren",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Locaties selecteren",
+ "selectedSP": "Geselecteerde service-principal",
+ "servicePrincipalBladeExcludedSelectorTitle": "Uitgesloten service-principals selecteren",
+ "servicePrincipalBladeIncludedSelectorTitle": "Service-principal selecteren",
+ "servicePrincipalDataGridAria": "Lijst met beschikbare service-principals",
+ "servicePrincipalDropDownLabel": "Waarop is dit beleid van toepassing?",
+ "servicePrincipalInfoBox": "Sommige voorwaarden zijn niet beschikbaar vanwege de selectie '{0}' in beleidstoewijzing",
+ "servicePrincipalRadioAll": "Alle service-principals in eigendom",
+ "servicePrincipalRadioSelect": "Service-principal selecteren",
+ "servicePrincipalSelectionsAria": "Geselecteerd service-principalsraster",
+ "servicePrincipalSelectorAria": "Lijst met gekozen service-principals",
+ "servicePrincipalSelectorMultiple": "{0} service-principal zijn geselecteerd",
+ "servicePrincipalSelectorSingle": "1 service-principal is geselecteerd",
+ "servicePrincipalSpecificExc": "Specifieke service-principals uitgesloten",
+ "servicePrincipalSpecificInc": "Specifieke service-principals opgenomen",
+ "servicePrincipals": "Service-principals",
+ "sessionControlBladeTitle": "Sessie",
+ "sessionControlDescriptionContent": "Beheer de toegang op basis van sessiebeheer om beperkte ervaringen in specifieke cloudtoepassingen in te schakelen.",
+ "sessionControlDisableInfo": "Dit besturingselement werkt alleen bij ondersteunde apps. Office 365, Exchange Online en SharePoint Online zijn momenteel de enige cloud-apps die door apps gehandhaafde beperkingen ondersteunen. Klik hier voor meer informatie.",
+ "sessionControlInfoBallonText": "Met de sessiebesturingselementen wordt de beperkte ervaring in een cloud-app ingeschakeld.",
+ "sessionControls": "Sessiebesturingselementen",
+ "sessionControlsAppEnforcedLabel": "Door apps gehandhaafde beperkingen gebruiken",
+ "sessionControlsCasLabel": "App-beheer voor voorwaardelijke toegang gebruiken",
+ "sessionControlsSecureSignInLabel": "Tokenbinding vereist",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} opgenomen",
+ "signinRiskReauth": "De voorwaarde 'Aanmeldingsrisico' moet worden geselecteerd wanneer 'Meervoudige verificatie vereisen' en sessiebeheer 'aanmeldingsfrequentie elke keer' zijn geselecteerd",
+ "signinRiskTriggerDescriptionContent": "Het niveau voor het aanmeldingsrisico selecteren",
+ "singleTenantServicePrincipalInfoBallonText": "Beleid is alleen van toepassing op service-principals met één tenant die eigendom zijn van uw organisatie. Klik hier voor meer informatie ",
+ "specificSigninRiskLevelsOption": "Specifieke risiconiveaus voor aanmeldingen selecteren",
+ "specificUsersExcluded": "specifieke gebruikers uitgesloten",
+ "specificUsersIncluded": "Specifieke gebruikers opgenomen",
+ "specificUsersIncludedAndExcluded": "Specifieke uitgesloten en opgenomen gebruikers",
+ "startDatePickerLabel": "Start",
+ "startFreeTrial": "Start een gratis proefversie",
+ "startTimePickerLabel": "Begintijd",
+ "sunday": "zondag",
+ "testButton": "What If",
+ "thumbprintCol": "Vingerafdruk",
+ "thursday": "donderdag",
+ "timeConditionAllTimesLabel": "Willekeurig",
+ "timeConditionIntroText": "De tijd configureren waarop dit beleid van toepassing is",
+ "timeConditionSelectorInfoBallonContent": "Wanneer de gebruiker zich aanmeldt, bijvoorbeeld woensdag van 09:00 - 17:00 uur CEST",
+ "timeConditionSelectorLabel": "Tijd (preview)",
+ "timeConditionSpecificLabel": "Specifieke tijden",
+ "timeSelectorAllTimesText": "Willekeurig",
+ "timeSelectorSpecificTimesText": "Specifieke geconfigureerde tijden",
+ "timeZoneDropdownInfoBalloonContent": "Selecteer een tijdzone waarmee het tijdsbereik wordt gedefinieerd. Dit beleid is van toepassing op gebruikers in alle tijdzones. Zo kan 'woensdag van 9:00 - 17:00' het tijdsbereik voor de ene gebruiker zijn en 'woensdag van 10;00 - 18:00 uur' het tijdsbereik voor een gebruiker in een andere tijdzone.",
+ "timeZoneDropdownLabel": "Tijdzone",
+ "timeZoneDropdownPlaceholderText": "Selecteer een tijdzone",
+ "tooManyPoliciesDescription": "Alleen de eerste 50 beleidsregels worden nu weergegeven. Klik hier om alle beleidsregels weer te geven",
+ "tooManyPoliciesTitle": "Meer dan 50 beleidsregels gevonden",
+ "trustedLocationStatusIconDescription": "De locatie is vertrouwd",
+ "trustedLocationStatusIconEnabled": "Pictogram voor vertrouwde status",
+ "tuesday": "dinsdag",
+ "uploadInBadState": "Kan het opgegeven bestand niet uploaden.",
+ "upsellAppsDescription": "Altijd meervoudige verificatie vereisen voor gevoelige toepassingen of alleen voor toepassingen buiten het bedrijfsnetwerk.",
+ "upsellAppsTitle": "Beveiligde toepassingen",
+ "upsellBannerText": "Neem een gratis Premium-proefversie als u deze functie wilt gebruiken",
+ "upsellDataDescription": "Vereisen dat het apparaat is gemarkeerd als conform of samengevoegd met hybride Microsoft Entra voordat toegang tot bedrijfsresources wordt toegestaan.",
+ "upsellDataTitle": "Beveiligde gegevens",
+ "upsellDescription": "Met voorwaardelijke toegang beschikt u over de controle en beveiliging die u nodig hebt om uw bedrijfsgegevens veilig te houden, terwijl gebruikers hun werkzaamheden op elk apparaat kunnen uitvoeren. U kunt bijvoorbeeld de toegang van buiten het bedrijfsnetwerk beperken of de toegang beperken tot apparaten die voldoen aan het nalevingsbeleid.",
+ "upsellRiskDescription": "Meervoudige verificatie vereisen voor risicogebeurtenissen die worden gedetecteerd door het machine learning-systeem van Microsoft.",
+ "upsellRiskTitle": "Beschermen tegen risico's",
+ "upsellTitle": "Voorwaardelijke toegang",
+ "upsellWhyTitle": "Waarom zou ik voorwaardelijke toegang gebruiken?",
+ "userAppNoneOption": "Geen",
+ "userNamePlaceholderText": "Gebruikersnaam invoeren",
+ "userNotSetSeletorLabel": "0 gebruikers en groepen geselecteerd",
+ "userOnlySelectionBladeExcludeDescription": "De gebruikers selecteren die van het beleid moeten worden uitgesloten",
+ "userOrGroupSelectionCountDiffBannerText": "{0} die zijn geconfigureerd in dit beleid, zijn uit de map verwijderd, maar dit heeft geen invloed op de andere gebruikers en groepen in het beleid. De volgende keer dat u het beleid bijwerkt, worden de verwijderde gebruikers en/of groepen automatisch verwijderd.",
+ "userOrSPNotSetSelectorLabel": "0 gebruikers of werkbelastingsidentiteiten geselecteerd",
+ "userOrSPSelectionBladeTitle": "Gebruikers of werkbelastingsidentiteiten",
+ "userOrSPSelectorInfoBallonText": "Identiteiten in de map waarop het beleid van toepassing is, inclusief gebruikers, groepen en service-principals",
+ "userRequired": "Gebruiker vereist",
+ "userRiskErrorBox": "De voorwaarde Gebruikersrisico moet worden geselecteerd wanneer de toekenning Wachtwoordwijziging vereisen is geselecteerd",
+ "userRiskReauth": "\"Gebruikersrisico\"-voorwaarde en niet \"Aanmeldingsrisico\" moet worden geselecteerd wanneer toekenning \"Wachtwoordwijziging vereisen\" en sessiecontrole \"Aanmeldingsfrequentie elke keer\" zijn geselecteerd",
+ "userSPRequired": "Gebruiker of service-principal vereist",
+ "userSPSelectorTitle": "Gebruiker of werkbelastingsidentiteit",
+ "userSelectionBladeAllUsersAndGroups": "Alle gebruikers en groepen",
+ "userSelectionBladeExcludeDescription": "De gebruikers en groepen selecteren die van het beleid moeten worden uitgesloten",
+ "userSelectionBladeExcludeTabTitle": "Uitsluiten",
+ "userSelectionBladeExcludedSelectorTitle": "Uitgesloten gebruikers en groepen selecteren",
+ "userSelectionBladeIncludeDescription": "De gebruikers selecteren waarop dit beleid van toepassing is",
+ "userSelectionBladeIncludeTabTitle": "Opnemen",
+ "userSelectionBladeIncludedSelectorTitle": "Selecteren",
+ "userSelectionBladeSelectUsers": "Gebruikers selecteren",
+ "userSelectionBladeSelectedUsers": "Gebruikers en groepen selecteren",
+ "userSelectionBladeTitle": "Gebruikers en groepen",
+ "userSelectorBladeTitle": "Gebruikers",
+ "userSelectorExcluded": "{0} uitgesloten",
+ "userSelectorGroupPlural": "{0} groepen",
+ "userSelectorGroupSingular": "1 groep",
+ "userSelectorIncluded": "{0} opgenomen",
+ "userSelectorInfoBallonText": "Gebruikers en groepen in de map waarop het beleid van toepassing is, bijvoorbeeld Testfasegroep",
+ "userSelectorSelected": "{0} geselecteerd",
+ "userSelectorTitle": "Gebruiker",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} gebruikers",
+ "userSelectorUserSingular": "1 gebruiker",
+ "userSelectorWithExclusion": "{0} en {1}",
+ "usersGroupsLabel": "Gebruikers en groepen",
+ "viewApprovedAppsText": "Lijst met goedgekeurde clientapps weergeven",
+ "viewCompliantAppsText": "Lijst met door beleid beveiligde client-apps weergeven",
+ "viewPolicyInformation": "Beleidsgegevens weergeven",
+ "vpnBladeTitle": "VPN-verbinding",
+ "vpnCertCreateFailedMessage": "Fout: {0}",
+ "vpnCertCreateFailedTitle": "Kan {0} niet maken",
+ "vpnCertCreateInProgressTitle": "{0} maken",
+ "vpnCertCreateSuccessMessage": "{0} is gemaakt.",
+ "vpnCertCreateSuccessTitle": "{0} is gemaakt",
+ "vpnCertNoRowsMessage": "Geen VPN-certificaten gevonden",
+ "vpnCertUpdateFailedMessage": "Fout: {0}",
+ "vpnCertUpdateFailedTitle": "Kan {0} niet bijwerken",
+ "vpnCertUpdateInProgressTitle": "{0} bijwerken",
+ "vpnCertUpdateSuccessMessage": "{0} is bijgewerkt.",
+ "vpnCertUpdateSuccessTitle": "{0} is bijgewerkt",
+ "vpnFeatureInfo": "Klik hier voor meer informatie over de VPN-verbinding en voorwaardelijke toegang.",
+ "vpnFeatureWarning": "Nadat een VPN-certificaat is gemaakt in de portal, wordt het direct door Microsoft Entra ID gebruikt om certificaten met korte levensduur te verlenen aan de VPN-client. Het is van cruciaal belang dat het VPN-certificaat direct wordt geïmplementeerd op de VPN-server om eventuele problemen met de validatie van referenties van de VPN-client te voorkomen.",
+ "vpnMenuText": "VPN-verbinding",
+ "vpncertDropdownDefaultOption": "Duur",
+ "vpncertDropdownInfoBalloonContent": "Selecteer de duur van het certificaat dat u wilt maken",
+ "vpncertDropdownLabel": "Duur selecteren",
+ "vpncertDropdownOneyearOption": "1 jaar",
+ "vpncertDropdownThreeyearOption": "Drie jaar",
+ "vpncertDropdownTwoyearOption": "Twee jaar",
+ "wednesday": "woensdag",
+ "whatIfCountry": "Land/regio",
+ "whatIfCountryInfo": "Het land/de regio van waaruit de gebruiker zich aanmeldt.",
+ "whatIfDevicePlatformInfo": "Het apparaatplatform waarmee de gebruiker zich aanmeldt.",
+ "whatIfEnterIpAddress": "IP-adres invoeren (bijvoorbeeld 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "Er is een ongeldig IP-adres opgegeven.",
+ "whatIfIpAddress": "IP-adres",
+ "whatIfIpAddressInfo": "Het IP-adres waarvandaan de gebruiker zich aanmeldt.",
+ "whatIfIpCountryInfoBoxText": "Als u een IP-adres of land/regio gebruikt, zijn beide velden vereist en moeten ze correct aan elkaar worden toegewezen.",
+ "whatIfSelectCountry": "Land/regio selecteren",
+ "whatIfSelectDevicePlatform": "Apparaatplatformen selecteren...",
+ "whatIfSelectPrivateLink": "Privékoppeling selecteren...",
+ "whatIfSelectSignInRisk": "Aanmeldingsrisico selecteren...",
+ "whatIfSignInRisk": "Aanmeldingsrisico",
+ "whatIfSignInRiskInfo": "Het risiconiveau gekoppeld aam de aanmelding",
+ "whatIfUnknownAreas": "Onbekende gebieden",
+ "windows365InfoBox": "Als u Windows 365 selecteert, is dit van invloed op verbindingen met cloud-pc's en Azure Virtual Desktop-sessiehosts. Klik hier voor meer informatie.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Workloadidentiteiten (preview-versie)",
+ "workloadIdentitiesLicenseText": "Er is een premium P1- of P2-licentie voor workload-identiteiten vereist om dit beleid te bewerken.",
+ "workloadIdentity": "Workload-identiteit"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Overzicht"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Zoeken op het apparaat, gebruiker of versie van de kwaliteitsupdate."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Kan de updateprofielen voor iOS-software niet laden"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS-updateprofiel",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profiel"
+ },
+ "listLoadError": "Kan de updateprofielen voor iOS-software niet laden. Probeer het later opnieuw",
+ "lowercase": "iOS-updatebeleid",
+ "uppercase": "iOS-updatebeleid"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Er kan geen verbinding worden gemaakt met Apple om de lijst met beschikbare versies op te halen. Probeer het later opnieuw of ga door met de nieuwste versie.",
+ "latestUpdate": "Laatste update",
+ "noLongerSupported": "De geselecteerde versie wordt niet meer ondersteund",
+ "olderVersionSelected": "Doordat u een eerdere versie hebt geselecteerd, moet u een restrictiebeleid toepassen waarmee de zichtbaarheid van software-updates wordt uitgesteld zodat apparaten niet kunnen worden bijgewerkt naar de nieuwste versie.",
+ "prefix": "iOS/iPadOS installeren",
+ "selectSupported": "De updateversie selecteren die wordt ondersteund door Apple",
+ "updateToInstall": "Update voor installatie"
+ },
+ "Schedule": {
+ "always": "Bijwerken bij volgende keer inchecken",
+ "duringTimeWindows": "Bijwerken op gepland tijdstip",
+ "header": "Wanneer een updatebeleid is toegewezen aan een apparaat, implementeert Intune standaard de nieuwste updates bij het inchecken van het apparaat. U kunt in plaats daarvan een wekelijks schema maken met aangepaste begin- en eindtijden. Als u ervoor kiest om bij te werken buiten de geplande tijd, implementeert Intune geen updates totdat de geplande tijd is afgelopen.",
+ "infoBalloon": "Wanneer de updates worden uitgevoerd. Aanvullende invoer is vereist om updates te plannen tijdens of buiten geplande tijden.",
+ "label": "Type planning",
+ "outsideActiveHours": "Bijwerken buiten gebruikstijden (verouderd)",
+ "outsideTimeWindows": "Bijwerken buiten gepland tijdstip",
+ "timeWindow": "Tijdvenster",
+ "timeZone": "Tijdzone",
+ "title": "Instellingen voor planning van updatebeleid:",
+ "weekly": "Wekelijkse planning",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "De versie van iOS/iPadOS die op apparaten moet worden geïnstalleerd op het moment dat deze worden bijgewerkt.",
+ "label": "Versie selecteren die moet worden geïnstalleerd"
+ },
+ "header": "Maak een profiel om af te dwingen dat de nieuwste iOS/iPadOS-updates automatisch worden geïnstalleerd op toegewezen apparaten. Deze instellingen bepalen hoe en wanneer software-updates worden geïmplementeerd. Het profiel voorkomt niet dat gebruikers het besturingssysteem handmatig kunnen bijwerken, al kan dit tot 90 dagen lang worden voorkomen met een restrictiebeleid voor apparaatinstellingen. De updates zijn alleen van toepassing op apparaten onder toezicht.",
+ "notAvailable": "N.v.t."
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Er zijn geen iOS-updateregels die kunnen worden weergegeven",
+ "macOsUpdates": "Er zijn geen updatebeleidsregels voor macOS-software die kunnen worden weergegeven",
+ "windowsUpdates": "Er zijn geen update-ringen voor Windows 10 en hoger om weer te geven."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Apparaatnaam",
+ "deviceUpdateStatus": "Updatestatus van apparaat",
+ "lastUpdated": "Laatst bijgewerkt",
+ "osVersion": "Besturingssysteemversie",
+ "userPrincipalName": "Gebruikersnaam"
+ },
+ "maximumOSVersionFilter": "Maximale versie van het besturingssysteem",
+ "minimumOSVersionFilter": "Minimale versie van het besturingssysteem",
+ "noData": "Geen gegevens om weer te geven",
+ "searchBoxPlaceholder": "Zoeken op apparaatnaam, gebruikersnaam of besturingssysteemversie",
+ "title": "Accountsamenvatting voor macOS-apparaten"
+ },
+ "Category": {
+ "configurationDataFile": "Configuratiegegevensbestand",
+ "critical": "Kritiek",
+ "firmware": "Firmware",
+ "other": "Overige"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Laatst bijgewerkt",
+ "successfulUpdateCount": "Correct geïmplementeerde updates",
+ "totalUpdateCount": "Totaal geïmplementeerde updates",
+ "updateCategory": "Updatecategorie",
+ "updateCategoryStatus": "Status van updatecategorie"
+ },
+ "noData": "Geen gegevens om weer te geven"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Kan de updateprofielen voor macOS-software niet laden"
+ }
+ },
+ "State": {
+ "available": "Beschikbaar",
+ "commandFailed": "Opdracht mislukt",
+ "downloadFailed": "Het downloaden is mislukt",
+ "downloadInsufficientNetwork": "Onvoldoende netwerkresources voor downloaden",
+ "downloadInsufficientPower": "Onvoldoende voeding voor downloaden",
+ "downloadInsufficientSpace": "Onvoldoende ruimte voor downloaden",
+ "downloaded": "Gedownload",
+ "downloading": "Downloaden",
+ "idle": "Niet-actief",
+ "installFailed": "De installatie is mislukt",
+ "installInsufficientPower": "Onvoldoende voeding voor installeren",
+ "installInsufficientSpace": "Onvoldoende ruimte voor installeren",
+ "installing": "Installeren",
+ "scheduled": "Gepland",
+ "success": "Geslaagd",
+ "unknown": "Onbekend"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Laatst bijgewerkt",
+ "updateName": "Naam van de update",
+ "updateStatus": "Updatestatus",
+ "version": "Versie"
+ },
+ "noData": "Geen gegevens om weer te geven",
+ "searchBoxPlaceholder": "Zoeken op updatenaam of -versie"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS-updateprofiel",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profiel"
+ },
+ "error": "Fout",
+ "errorOrErrors": "Fout(en)",
+ "errors": "Fouten",
+ "listLoadError": "Kan de updateprofielen voor macOS-software niet laden. Probeer het later opnieuw",
+ "lowercase": "macOs-updatebeleid",
+ "other": "Overige",
+ "subtitle": "MacOS-software-update",
+ "upToDate": "Bijgewerkt",
+ "uppercase": "macOS-updatebeleid"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Probeer het later opnieuw",
+ "title": "Kan {0} niet verwijderen"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Probeer het later opnieuw"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Probeer het later opnieuw",
+ "title": "Kan {0} niet laden"
+ },
+ "idWrongFormat": "De opgegeven id voor het profiel heeft niet de verwachte indeling."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "Er moet minimaal één tijdvenster worden geselecteerd",
+ "tooMany": "Er kunnen maximaal twintig tijdvensters worden geconfigureerd"
+ }
+ },
+ "endDay": "Einddag",
+ "endTime": "Eindtijd",
+ "startDay": "Startdag",
+ "startTime": "Begintijd",
+ "timeWindowError": "Kies een tijdvak dat ten minste één uur beslaat."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Kan de update-ringprofielen voor Windows 10 en hoger niet laden."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Ring bijwerken voor Windows 10 en hoger",
+ "title": "Windows Update voor Bedrijven"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 en later",
+ "title": "Ring bijwerken voor Windows 10 en hoger"
+ },
+ "listLoadError": "Kan de update-ringen voor Windows 10 en hoger niet laden, probeer het later opnieuw",
+ "lowercase": "Update-ring",
+ "uppercase": "Update-ring"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Beleidsinstellingen bijwerken",
+ "updateRingSettings": "Ringinstellingen bijwerken"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "{0} maken",
+ "edit": "{0} bewerken"
+ }
+ },
+ "notScannedYet": "Nog niet gescand",
+ "outOfDateIosDevices": "Apparaten met verouderde iOS"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge, versie 77 en hoger",
+ "storeApp": "Store-app",
+ "office365Suite": "Microsoft 365-apps",
+ "microsoftDefenderATP": "Microsoft Defender for Endpoint",
+ "other": "Overige",
+ "webApplication": "Webtoepassing"
+ },
+ "Filters": {
+ "ruleSyntax": "Regelsyntaxis",
+ "filters": "Filters"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Selecteer een detectiescript",
+ "scriptFileLabel": "Het detectiescript selecteren"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Als deze optie is ingeschakeld, moeten apparaten compatibel zijn volgens aangepaste regels gedefinieerd in een JSON-bestand op basis van aangepaste gegevens geretourneerd door een PowerShell-detectiescript.",
+ "label": "Aangepaste naleving wordt momenteel aangeboden als preview-versie. Zodra deze algemeen beschikbaar wordt, kunt u deze tegen extra kosten toevoegen aan de licentieopties die Microsoft Intune bevatten."
+ },
+ "ScriptPicker": {
+ "objectName": "Script",
+ "placeholder": "Klik om te selecteren",
+ "searchboxPlaceholder": "Zoeken op naam van script",
+ "title": "Een detectiescript selecteren"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Samenvatting van regels voor aangepaste naleving"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Upload en valideer het JSON-bestand met uw aangepaste nalevingsinstellingen",
+ "noFileSelectedError": "Selecteer een geldig JSON-bestand",
+ "parseFileSelectedError": "Het JSON-bestand is ongeldig"
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Configureer de pincode- en referentievereisten waaraan gebruikers moeten voldoen voor toegang tot apps in een werkomgeving."
+ },
+ "DataProtection": {
+ "infoText": "Deze groep bevat besturingselementen voor preventie van gegevensverlies (DLP), zoals beperkingen voor Knippen, Kopiëren, Plakken en Opslaan als. Met deze instellingen wordt bepaald hoe gebruikers met gegevens in de apps kunnen werken."
+ },
+ "DeviceTypes": {
+ "selectOne": "Selecteer ten minste één apparaattype."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Richten op apps op alle apparaattypen"
+ },
+ "infoText": "Kies hoe u dit beleid op apps op verschillende apparaten wilt toepassen. Voeg vervolgens ten minste één app toe.",
+ "selectOne": "Selecteer ten minste één app om een beleid te maken."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender for Endpoint",
+ "androidDeviceOwnerApplications": "Toepassingen",
+ "androidDeviceOwnerPolicyMessages": "Aangepaste ondersteuningsinformatie",
+ "androidForWorkPassword": "Apparaatwachtwoord",
+ "appManagement": "Apps blokkeren of toestaan",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Beperkte apps",
+ "applicationVisibility": "Apps weergeven of verbergen",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, documentweergave, gaming",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Apps en ervaring",
+ "associatedDomains": "Gekoppelde domeinen",
+ "autonomousSingleAppMode": "Autonome modus voor enkele app",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Windows-versleuteling",
+ "bootOptions": "Opties voor opstarten",
+ "browser": "Browser",
+ "builtinApps": "Geïntegreerde apps",
+ "cameras": "Camera's",
+ "cellular": "Mobiel",
+ "cloudAndStorage": "Cloud en opslag",
+ "cloudPrint": "Cloudprinter",
+ "complianceEmailProfile": "E-mail",
+ "connectedDevices": "Aangesloten apparaten",
+ "connectivity": "Mobiel en connectiviteit",
+ "contentCaching": "Cacheopslag van inhoud",
+ "controlPanelAndSettings": "Configuratiescherm en Instellingen",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Aangepaste naleving",
+ "customConfiguration": "Aangepast configuratieprofiel",
+ "customOMASettings": "Aangepaste OMA-URI-instellingen",
+ "customPreferences": "Voorkeursbestand",
+ "dFCISecuritySettings": "Beveiligingsinstellingen",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows Firewall",
+ "defenderLocalSecurityOptions": "Beveiligingsopties lokaal apparaat",
+ "defenderSecurityCenter": "Microsoft Defender-beveiligingscentrum",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedCredentialAuthenticationConfiguration": "Afgeleide referentie",
+ "deviceExperience": "Apparaat-ervaring",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Microsoft Defender-toepassingsbeheer",
+ "deviceHealth": "Apparaatstatus",
+ "devicePassword": "Apparaatwachtwoord",
+ "deviceProperties": "Apparaateigenschappen",
+ "deviceRestrictions": "Algemeen",
+ "deviceSecurity": "Systeembeveiliging",
+ "display": "Weergeven",
+ "domainJoin": "Domeindeelname",
+ "domains": "Domeinen",
+ "edgeBrowser": "Microsoft Edge Legacy (versie 45 en eerder)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge-kioskmodus",
+ "editionUpgrade": "Editie-upgrade",
+ "education": "Educatief",
+ "educationDeviceCerts": "Apparaatcertificaten",
+ "educationStudentCerts": "Studentcertificaten",
+ "educationTakeATest": "Een test uitvoeren",
+ "educationTeacherCerts": "Docentcertificaten",
+ "emailProfile": "E-mail",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "App-extensie voor eenmalige aanmelding",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Games",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Statuscontrole",
+ "homeScreenLayout": "Indeling startscherm",
+ "iOSWallpaper": "Achtergrond",
+ "importedPFX": "Geïmporteerd PKCS-certificaat",
+ "iosDefenderAtp": "Microsoft Defender for Endpoint",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Kernelextensies",
+ "keyboardAndDictionary": "Toetsenbord en woordenlijst",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Toegewezen apparaten",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Kiosk Web Browser",
+ "lockScreenMessage": "Bericht voor vergrendelingsscherm",
+ "lockedScreenExperience": "Ervaring vergrendeld scherm",
+ "logging": "Rapportage en telemetrie",
+ "loginItems": "Aanmeldingsitems",
+ "loginWindow": "Aanmeldingsvenster",
+ "macDefenderAtp": "Microsoft Defender for Endpoint",
+ "maintenance": "Onderhoud",
+ "malware": "Malware",
+ "messaging": "Berichten",
+ "microphonesAndSpeakers": "Microfoons en luidsprekers",
+ "networkBoundary": "De grens van het netwerk",
+ "networkProxy": "Netwerkproxy",
+ "notifications": "App-meldingen",
+ "pKCS": "PKCS-certificaat",
+ "password": "Wachtwoord",
+ "personalProfile": "Persoonlijk profiel",
+ "personalization": "Persoonlijke instellingen",
+ "policyOverride": "Groepsbeleid overschrijven",
+ "ports": "Poorten",
+ "powerSettings": "Energie-instellingen",
+ "printer": "Printer",
+ "privacy": "Privacy",
+ "privacyPerApp": "Privacyuitzonderingen per app",
+ "privacyPreferences": "Privacyvoorkeuren",
+ "projection": "Projectie",
+ "radios": "Radio's",
+ "sCCMCompliance": "Configuration Manager-naleving",
+ "sCEP": "SCEP-certificaat",
+ "sCEPProperties": "SCEP-certificaat",
+ "sMode": "Overschakelen naar andere modus (alleen Windows Insider)",
+ "safari": "Safari",
+ "search": "Zoeken",
+ "session": "Sessie",
+ "sharedDevice": "Gedeelde iPad",
+ "sharedPCAccountManager": "Gedeeld apparaat voor meerdere gebruikers",
+ "singleSignOn": "Eenmalige aanmelding",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Instellingen",
+ "start": "Begin",
+ "systemExtensions": "Systeemextensies",
+ "systemSecurity": "Systeembeveiliging",
+ "trustedCert": "Vertrouwd certificaat",
+ "uEFIAccess": "UEFI-toegang",
+ "updates": "Updates",
+ "userRights": "Gebruikersrechten",
+ "usersAndAccounts": "Gebruikers en accounts",
+ "vPN": "Basis-VPN",
+ "vPNApps": "Automatische VPN",
+ "vPNAppsAndTrafficRules": "Apps en verkeersregels",
+ "vPNConditionalAccess": "Voorwaardelijke toegang",
+ "vPNConnectivity": "Connectiviteit",
+ "vPNDNSTriggers": "DNS-instellingen",
+ "vPNIKEv2": "IKEv2-instellingen",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Split tunneling",
+ "vPNTrustedNetwork": "Vertrouwde netwerkdetectie",
+ "wakeSettings": "Instellingen voor activeren",
+ "webContentFilter": "Webinhoudsfilter",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender for Endpoint",
+ "windowsDefenderATP": "Microsoft Defender for Endpoint",
+ "windowsHelloForBusiness": "Windows Hello voor Bedrijven",
+ "windowsSpotlight": "Windows-spotlight",
+ "wiredNetwork": "Bekabeld netwerk",
+ "wireless": "Draadloos",
+ "wirelessProjection": "Draadloze projectie",
+ "workProfile": "Werkprofielinstellingen",
+ "workProfilePassword": "Werkprofielwachtwoord",
+ "xboxServices": "Xbox-services",
+ "zebraMx": "MX-profiel (alleen Zebra)",
+ "complianceActionsLabel": "Acties voor niet-naleving"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Toegestane URL's",
+ "tooltip": "Geef de sites op waartoe uw gebruikers toegang hebben in hun werkcontext. Er zijn geen andere sites toegestaan. U kunt ervoor kiezen om een lijst met toegestane/geblokkeerde apps te configureren, maar niet beide. "
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Toepassingsproxy",
+ "title": "Toepassingsproxy omleiden",
+ "tooltip": "Schakel de omleiding van toepassingsproxy's in om gebruikers toegang te geven tot koppelingen van het bedrijf en on-premises web-apps."
+ },
+ "BlockedURLs": {
+ "title": "Geblokkeerde URL's",
+ "tooltip": "Geef de sites op die voor uw gebruikers zijn geblokkeerd in hun werkcontext. Alle andere sites zijn toegestaan. U kunt ervoor kiezen om een lijst met toegestane/geblokkeerde apps te configureren, maar niet beide. "
+ },
+ "Bookmarks": {
+ "header": "Beheerde bladwijzers",
+ "tooltip": "Voer een lijst met URL-adressen in die beschikbaar zijn voor uw gebruikers wanneer ze gebruikmaken van Microsoft Edge in hun werkcontext.",
+ "uRL": "URL"
+ },
+ "HomepageURL": {
+ "header": "Beheerde startpagina",
+ "title": "Snelkoppelings-URL voor startpagina",
+ "tooltip": "Configureer een snelkoppeling voor de startpagina die voor gebruikers als het eerste pictogram onder de zoekbalk wordt weergegeven wanneer een nieuw tabblad wordt geopend in Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Beperkte sites omleiden naar persoonlijke context",
+ "tooltip": "Configureer of gebruikers mogen overschakelen naar hun persoonlijke context om beperkte sites te openen."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home-SKU",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Selecteer het aantal bits dat in de sleutel is opgenomen.",
- "keyUsage": "Geef de cryptografische actie op die nodig is voor het uitwisselen van de openbare sleutel van het certificaat.",
- "renewalThreshold": "Geef het percentage (tussen 1 en 99 procent) op van de resterende levensduur van het certificaat dat is toegestaan voordat een apparaat vernieuwing van het certificaat kan aanvragen. De aanbevolen waarde voor Intune is 20%. (1-99)",
- "rootCert": "Kies een eerder geconfigureerd en toegewezen certificaatprofiel van een basis-CA. Het CA-certificaat moet overeenkomen met het basiscertificaat van de CA die het certificaat verleent voor dit profiel (hetgeen u momenteel configureert).",
- "scepServerUrl": "Voer een URL in voor de NDES-server waarmee certificaten worden uitgegeven via SCEP (moet HTTPS zijn), bijvoorbeeld https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Voer een of meer URL's in voor de NDES-server waarmee certificaten worden uitgegeven via SCEP (moet HTTPS zijn), bijvoorbeeld https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Alternatieve naam voor onderwerp",
- "subjectNameFormat": "Indeling van de onderwerpnaam",
- "validityPeriod": "De resterende tijd voordat het certificaat verloopt. Voer een waarde in die gelijk is aan of lager is dan de geldigheidsperiode die wordt weergegeven in de certificaatsjabloon. Is standaard ingesteld op een jaar."
- },
- "appInstallContext": "Hiermee bepaalt u de installatiecontext die moet worden gekoppeld aan deze app. Selecteer de gewenste context apps met dubbele modus. Voor alle andere toepassingen wordt dit vooraf geselecteerd op basis van het pakket; dit kan niet worden gewijzigd.",
- "autoUpdateMode": "Configureer de updateprioriteit voor de app. Selecteer Standaard om te vereisen dat het apparaat is verbonden met Wi-Fi, dat deze opgeladen wordt en niet actief wordt gebruikt voordat u de app bijwerkt. Selecteer Hoge prioriteit om de app bij te werken zodra de ontwikkelaar de app heeft gepubliceerd, ongeacht oplaadstatus, Wi-Fi-mogelijkheden of activiteiten van eindgebruikers op het apparaat. Selecteer Uitgesteld om af te zien van app-updates voor maximaal 90 dagen. Hoge prioriteit en Uitgesteld worden alleen van kracht op DO-apparaten.",
- "configurationSettingsFormat": "Tekstopmaak van de configuratie-instellingen",
- "ignoreVersionDetection": "Stel dit in op Yes voor toepassingen die automatisch worden bijgewerkt door de app-ontwikkelaar (zoals Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Selecteer Ja voor apps die automatisch worden bijgewerkt door de app-ontwikkelaar of om alleen te controleren op app-bundleID voor de installatie. Selecteer Nee om te controleren op app-bundleID en versienummer vóór de installatie.",
- "installAsManagedMacOSLobApp": "Deze instelling is alleen van toepassing op macOS 11 en hoger. De app wordt geïnstalleerd, maar wordt niet beheerd op macOS 10.15 en lager.",
- "installContextDropdown": "Selecteer de juiste installatiecontext. In de gebruikerscontext wordt de app alleen geïnstalleerd voor de gebruiker waarop de app is gericht; in de apparaatcontext wordt de app voor alle gebruikers op het apparaat geïnstalleerd.",
- "ldapUrl": "Dit is de LDAP-hostnaam waar clients openbare versleutelingssleutels kunnen downloaden voor e-mailontvangers. E-mailberichten worden versleuteld als er een sleutel beschikbaar is. Ondersteunde indelingen:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Selecteer runtime-machtigingen voor de bijbehorende app.",
- "policyAssociatedApp": "Selecteer de app waaraan dit beleid wordt gekoppeld.",
- "policyConfigurationSettings": "Selecteer de methode die u wilt gebruiken om de configuratie-instellingen van dit beleid te definiëren.",
- "policyDescription": "U kunt optioneel een beschrijving van dit configuratiebeleid invoeren.",
- "policyEnrollmentType": "Kies of deze instellingen worden beheerd via apparaatbeheer of via apps die zijn gemaakt met Intune SDK.",
- "policyName": "Voer een naam voor dit configuratiebeleid in.",
- "policyPlatform": "Selecteer het platform waarop dit app-configuratiebeleid van toepassing is.",
- "policyProfileType": "Selecteer de apparaatprofieltypen waarop dit app-configuratieprofiel van toepassing is",
- "policySMime": "S/MIME-ondertekening en versleutelingsinstellingen voor Outlook configureren.",
- "sMimeDeployCertsFromIntune": "Opgeven of er S/MIME-certificaten worden geleverd via Intune voor gebruik met Outlook.\r\nMet Intune kunnen certificaten voor ondertekening en versleuteling automatisch voor gebruikers worden geïmplementeerd via de bedrijfsportal.",
- "sMimeEnable": "Opgeven of S/MIME-besturingselementen zijn ingeschakeld bij het opstellen van een e-mailbericht",
- "sMimeEnableAllowChange": "Geef aan of de gebruiker de instelling S/MIME inschakelen mag wijzigen.",
- "sMimeEncryptAllEmails": "Opgeven of alle e-mailberichten moeten worden versleuteld.\r\nTijdens de versleuteling worden gegevens met een coderingstekst geconverteerd zodat alleen de beoogde ontvanger het e-mailbericht kan lezen.",
- "sMimeEncryptAllEmailsAllowChange": "Geef aan of de gebruiker de instelling Alle e-mailberichten versleutelen mag wijzigen.",
- "sMimeEncryptionCertProfile": "Certificaatprofiel voor versleuteling van e-mails opgeven.",
- "sMimeSignAllEmails": "Opgeven of alle e-mailberichten moeten worden ondertekend.\r\nMet een digitale handtekening wordt de echtheid van het e-mailbericht gecontroleerd om ervoor te zorgen dat de inhoud niet onrechtmatig kan worden gewijzigd tijdens de overdracht.",
- "sMimeSignAllEmailsAllowChange": "Geef aan of de gebruiker de instelling Alle e-mails ondertekenen mag wijzigen.",
- "sMimeSigningCertProfile": "Certificaatprofiel voor het ondertekenen van e-mails opgeven.",
- "sMimeUserNotificationType": "De methode waarmee gebruikers worden geïnformeerd dat ze de bedrijfsportal moeten openen om S/MIME-certificaten voor Outlook op te halen."
- },
+ "Languages": {
+ "ar-aE": "Arabisch (V.A.E.)",
+ "ar-bH": "Arabisch (Bahrein)",
+ "ar-dZ": "Arabisch (Algerije)",
+ "ar-eG": "Arabisch (Egypte)",
+ "ar-iQ": "Arabisch (Irak)",
+ "ar-jO": "Arabisch (Jordanië)",
+ "ar-kW": "Arabisch (Koeweit)",
+ "ar-lB": "Arabisch (Libanon)",
+ "ar-lY": "Arabisch (Libië)",
+ "ar-mA": "Arabisch (Marokko)",
+ "ar-oM": "Arabisch (Oman)",
+ "ar-qA": "Arabisch (Qatar)",
+ "ar-sA": "Arabisch (Saoedi-Arabië)",
+ "ar-sY": "Arabisch (Syrië)",
+ "ar-tN": "Arabisch (Tunesië)",
+ "ar-yE": "Arabisch (Jemen)",
+ "az-cyrl": "Azerbeidzjaans (Cyrillisch, Azerbeidzjan)",
+ "az-latn": "Azerbeidzjaans (Latijns, Azerbeidzjan)",
+ "bn-bD": "Bengaals (Bangladesh)",
+ "bn-iN": "Bangla (India)",
+ "bs-cyrl": "Bosnisch (Cyrillisch)",
+ "bs-latn": "Bosnisch (Latijns)",
+ "zh-cN": "Chinees (Volksrepubliek China)",
+ "zh-hK": "Chinees (Hongkong SAR)",
+ "zh-mO": "Chinees (Macao SAR)",
+ "zh-sG": "Chinees (Singapore)",
+ "zh-tW": "Chinees (Taiwan)",
+ "hr-bA": "Kroatisch (Latijn)",
+ "hr-hR": "Kroatisch (Kroatië)",
+ "nl-bE": "Nederlands (België)",
+ "nl-nL": "Nederlands (Nederland)",
+ "en-aU": "Engels (Australië)",
+ "en-bZ": "Engels (Belize)",
+ "en-cA": "Engels (Canada)",
+ "en-cabn": "Engels (Caribisch Gebied)",
+ "en-iE": "Engels (Ierland)",
+ "en-iN": "Engels (India)",
+ "en-jM": "Engels (Jamaica)",
+ "en-mY": "Engels (Maleisië)",
+ "en-nZ": "Engels (Nieuw-Zeeland)",
+ "en-pH": "Engels (Republiek der Filipijnen)",
+ "en-sG": "Engels (Singapore)",
+ "en-tT": "Engels (Trinidad en Tobago)",
+ "en-uK": "Engels (Verenigd Koninkrijk)",
+ "en-uS": "Engels (Verenigde Staten)",
+ "en-zA": "Engels (Zuid-Afrika)",
+ "en-zW": "Engels (Zimbabwe)",
+ "fr-bE": "Frans (België)",
+ "fr-cA": "Frans (Canada)",
+ "fr-cH": "Frans (Zwitserland)",
+ "fr-fR": "Frans (Frankrijk)",
+ "fr-lU": "Frans (Luxemburg)",
+ "fr-mC": "Frans (Monaco)",
+ "de-aT": "Duits (Oostenrijk)",
+ "de-cH": "Duits (Zwitserland)",
+ "de-dE": "Duits (Duitsland)",
+ "de-lI": "Duits (Liechtenstein)",
+ "de-lU": "Duits (Luxemburg)",
+ "iu-cans": "Inuktitut (syllabische tekens, Canada)",
+ "iu-latn": "Inuktitut (Latijns, Canada)",
+ "it-cH": "Italiaans (Zwitserland)",
+ "it-iT": "Italiaans (Italië)",
+ "ms-bN": "Maleis (Brunei Darussalam)",
+ "ms-mY": "Maleis (Maleisië)",
+ "mn-cN": "Mongools (Traditioneel Mongools, Volksrepubliek China)",
+ "mn-mN": "Mongools (Cyrillisch, Mongolië)",
+ "no-nB": "Noors, Bokmål (Noorwegen)",
+ "no-nn": "Noors, Nynorsk (Noorwegen)",
+ "pt-bR": "Portugees (Brazilië)",
+ "pt-pT": "Portugees (Portugal)",
+ "quz-bO": "Quechua (Bolivia)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Peru)",
+ "smj-nO": "Sami, Lule (Noorwegen)",
+ "smj-sE": "Sami, Lule (Zweden)",
+ "se-fI": "Sami, noordelijk (Finland)",
+ "se-nO": "Sami, noordelijk (Noorwegen)",
+ "se-sE": "Sami, noordelijk (Zweden)",
+ "sma-nO": "Sami, zuidelijk (Noorwegen)",
+ "sma-sE": "Sami, zuidelijk (Zweden)",
+ "smn": "Sami, Inari (Finland)",
+ "sms": "Sami, Skolt (Finland)",
+ "sr-Cyrl-bA": "Servisch (Cyrillisch)",
+ "sr-Cyrl-rS": "Servisch (Cyrillisch, Servië en Montenegro (voormalig))",
+ "sr-Latn-bA": "Servisch (Latijns)",
+ "sr-Latn-rS": "Servisch (Latijns, Servië)",
+ "dsb": "Neder-Sorbisch (Duitsland)",
+ "hsb": "Opper-Sorbisch (Duitsland)",
+ "es-es-tradnl": "Spaans (Spanje, traditioneel)",
+ "es-aR": "Spaans (Argentinië)",
+ "es-bO": "Spaans (Bolivia)",
+ "es-cL": "Spaans (Chili)",
+ "es-cO": "Spaans (Colombia)",
+ "es-cR": "Spaans (Costa Rica)",
+ "es-dO": "Spaans (Dominicaanse Republiek)",
+ "es-eC": "Spaans (Ecuador)",
+ "es-eS": "Spaans (Spanje)",
+ "es-gT": "Spaans (Guatemala)",
+ "es-hN": "Spaans (Honduras)",
+ "es-mX": "Spaans (Mexico)",
+ "es-nI": "Spaans (Nicaragua)",
+ "es-pA": "Spaans (Panama)",
+ "es-pE": "Spaans (Peru)",
+ "es-pR": "Spaans (Puerto Rico)",
+ "es-pY": "Spaans (Paraguay)",
+ "es-sV": "Spaans (El Salvador)",
+ "es-uS": "Spaans (Verenigde Staten)",
+ "es-uY": "Spaans (Uruguay)",
+ "es-vE": "Spaans [Venezuele]",
+ "sv-fI": "Zweeds (Finland)",
+ "uz-cyrl": "Oezbeeks (Cyrillisch, Oezbekistan)",
+ "uz-latn": "Oezbeeks (Latijns, Oezbekistan)",
+ "af": "Afrikaans (Zuid-Afrika)",
+ "sq": "Albanees (Albanië)",
+ "am": "Amhaars (Ethiopië)",
+ "hy": "Armeens (Armenië)",
+ "as": "Assamees (India)",
+ "ba": "Bashkir (Rusland)",
+ "eu": "Baskisch (Baskisch)",
+ "be": "Belarussisch (Belarus)",
+ "br": "Bretons (Frankrijk)",
+ "bg": "Bulgaars (Bulgarije)",
+ "ca": "Catalaans (Catalaans)",
+ "co": "Corsicaans (Frankrijk)",
+ "cs": "Tsjechisch (Tsjechische Republiek)",
+ "da": "Deens (Denemarken)",
+ "dv": "Divehi (Maldiven)",
+ "et": "Estisch (Estland)",
+ "fo": "Faeröers (Faröer)",
+ "fil": "Filipijns (Filipijnen)",
+ "fi": "Fins (Finland)",
+ "gl": "Galicisch (Gallicië)",
+ "ka": "Georgisch (Georgië)",
+ "el": "Grieks (Griekenland)",
+ "gu": "Gujarati (India)",
+ "ha": "Hausa (Latijns, Nigeria)",
+ "he": "Hebreeuws (Israël)",
+ "hi": "Hindi (India)",
+ "hu": "Hongaars (Hongarije)",
+ "is": "IJslands (IJsland)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonesisch (Indonesië)",
+ "ga": "Iers (Ierland)",
+ "xh": "isiXhosa (Zuid-Afrika)",
+ "zu": "isiZulu (Zuid-Afrika)",
+ "ja": "Japans (Japan)",
+ "kn": "Kannada (India)",
+ "kk": "Kazachs (Kazachstan)",
+ "km": "Khmer (Cambodja)",
+ "rw": "Kinyarwanda (Rwanda)",
+ "sw": "Kiswahili (Kenia)",
+ "kok": "Konkani (India)",
+ "ko": "Koreaans (Korea)",
+ "ky": "Kirgizisch (Kirgizië)",
+ "lo": "Lao (Democratische Volksrepubliek Laos)",
+ "lv": "Lets (Letland)",
+ "lt": "Litouws (Litouwen)",
+ "lb": "Luxemburgs (Luxemburg)",
+ "mk": "Macedonisch (Noord-Macedonië)",
+ "ml": "Malayalam (India)",
+ "mt": "Maltees (Malta)",
+ "mi": "Maori (Nieuw-Zeeland)",
+ "mr": "Marathi (India)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepalees (Nepal)",
+ "oc": "Occitaans (Frankrijk)",
+ "or": "Odia (India)",
+ "ps": "Pashto (Afghanistan)",
+ "fa": "Perzisch",
+ "pl": "Pools (Polen)",
+ "pa": "Punjabi (India)",
+ "ro": "Roemeens (Roemenië)",
+ "rm": "Romaans (Zwitserland)",
+ "ru": "Russisch (Rusland)",
+ "sa": "Sanskriet (India)",
+ "st": "Sesotho sa Leboa (Zuid-Afrika)",
+ "tn": "Setswana (Zuid-Afrika)",
+ "si": "Sinhala (Sri Lanka)",
+ "sk": "Slowaaks (Slowakije)",
+ "sl": "Sloveens (Slovenië)",
+ "sv": "Zweeds (Zweden)",
+ "syr": "Syrisch (Syrië)",
+ "tg": "Tadzjieks (Cyrillisch, Tadzjikistan)",
+ "ta": "Tamil (India)",
+ "tt": "Tataars (Rusland)",
+ "te": "Telugu (India)",
+ "th": "Thai (Thailand)",
+ "bo": "Tibetaans (Volksrepubliek China)",
+ "tr": "Turks (Turkije)",
+ "tk": "Turkmeens (Turkmenistan)",
+ "uk": "Oekraïens (Oekraïne)",
+ "ur": "Oerdoe (Islamitische Republiek Pakistan)",
+ "vi": "Vietnamees (Vietnam)",
+ "cy": "Welsh (Verenigd Koninkrijk)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (Volksrepubliek China)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Ingebouwde rol",
+ "customCloudPCRole": "Aangepaste Windows 365-rol",
+ "customIntuneRole": "Aangepaste Intune-rol",
+ "customRole": "Aangepaste rol"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "App-versie",
+ "dependencyName": "Naam van afhankelijkheid",
+ "lastModifiedTime": "Tijdstip laatst gewijzigd",
+ "relationship": "Relatie",
+ "replaced": "Vervangen",
+ "searchPlaceholder": "Filteren op app-naam",
+ "status": "Statusdetails",
+ "statusDetails": "Status",
+ "supersedenceName": "Vervangingsnaam"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Onderliggende afhankelijkheid",
+ "indirectSupersedence": "Niet rechtstreeks gerelateerd",
+ "supersedenceAncestors": "Vervangen",
+ "supersedenceDescendants": "Vervangen"
+ },
+ "SupersededReplaced": {
+ "no": "Nee",
+ "yes": "Ja"
+ },
+ "Tabs": {
+ "chart": "Diagram",
+ "dependency": "Afhankelijkheid",
+ "label": "Weergeven: ",
+ "supersedence": "Vervanging",
+ "table": "Tabel"
+ },
+ "dependencyGraphAriaLabel": "Diagram app-afhankelijkheid",
+ "supersedenceGraphAriaLabel": "Appvervangingsgrafiek"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Het aantal dagen dat moet worden gewacht voordat opnieuw opstarten wordt afgedwongen"
+ },
+ "Description": {
+ "label": "Beschrijving"
+ },
+ "Name": {
+ "label": "Naam"
+ },
+ "QualityUpdateRelease": {
+ "label": "De installatie van kwaliteitsupdates versnellen als de besturingssysteemversie van het apparaat lager is dan:"
+ },
+ "bladeTitle": "Kwaliteitsupdates Windows 10 en hoger (preview)",
+ "loadError": "Kan niet laden."
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Instellingen"
+ },
+ "infoBoxText": "Het enige besturingselement voor kwaliteitsupdates dat momenteel beschikbaar is naast het bestaande beleid voor update-ringen van Windows 10 en hoger, is de mogelijkheid om kwaliteitsupdates te versnellen voor apparaten die buiten een opgegeven patchniveau vallen. In de toekomst zullen meer besturingselementen beschikbaar zijn.",
+ "licenseLearnMoreText": "Meer informatie over vereisten en beleid voor kwaliteitsupdates.",
+ "licenseWarningBoxText": "Voor het maken van beleid voor kwaliteitsupdates zijn specifieke licenties vereist.",
+ "warningBoxText": "Door het versnellen van software-updates kunt u weliswaar de benodigde tijd voor het verkrijgen van naleving (indien nodig) verkorten, maar dit heeft bredere gevolgen voor de productiviteit van eindgebruikers. De kans dat gebruikers te maken krijgen met een herstart tijdens kantooruren neemt hierdoor aanzienlijk toe."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "In Android kunt u identificatie met een vingerafdruk in plaats van een pincode toestaan. Gebruikers worden om hun vingerafdruk gevraagd wanneer ze deze app openen met hun werkaccount.",
+ "iOS": "U kunt op iOS/iPadOS-apparaten identificatie met een vingerafdruk in plaats van met een pincode toestaan. Gebruikers worden gevraagd om hun vingerafdruk wanneer ze hun werkaccount gebruiken om toegang tot deze app te krijgen.",
+ "mac": "U kunt op Mac-apparaten identificatie met een vingerafdruk toestaan in plaats van met een pincode. Gebruikers wordt gevraagd om hun vingerafdruk wanneer ze hun werkaccount gebruiken om toegang tot deze app te krijgen."
+ },
+ "allowWidgetContentSync": "Kies Blokkeren om te voorkomen dat door beleid beheerde apps gegevens opslaan in app-widgets. Als u Toestaan kiest, kan de door beleid beheerde app gegevens opslaan in app-widgets, als deze functies worden ondersteund en zijn ingeschakeld in de door beleid beheerde app. \r\n\r\n \r\n\r\nApps kunnen extra configuratiemogelijkheden bieden met app-configuratiebeleid. Zie de documentatie van de app voor meer informatie.",
+ "appSharingFromLevel1": "Selecteer een van de volgende opties om de apps op te geven waarvan deze app gegevens kan ontvangen:",
+ "appSharingFromLevel2": "{0}: alleen toestaan dat gegevens in organisatiedocumenten of -accounts worden ontvangen die afkomstig zijn van andere door beleid beheerde apps",
+ "appSharingFromLevel3": "{0}: toestaan dat gegevens uit alle apps worden ontvangen in organisatiedocumenten of -accounts",
+ "appSharingFromLevel4": "{0}: niet toestaan dat gegevens uit alle apps worden ontvangen in organisatiedocumenten of -accounts",
+ "appSharingFromLevel5": "{0}: gegevensoverdracht toestaan van elke app en alle inkomende gegevens zonder gebruikers-id verwerken als organisatiegegevens.",
+ "appSharingToLevel1": "Selecteer een van de volgende opties om de apps op te geven waarnaar deze app gegevens kan verzenden:",
+ "appSharingToLevel2": "{0}: alleen toestaan dat organisatiegegevens worden verzonden naar andere door beleid beheerde apps",
+ "appSharingToLevel3": "{0}: toestaan dat organisatiegegevens naar alle apps worden verzonden",
+ "appSharingToLevel4": "{0}: niet toestaan dat organisatiegegevens naar alle apps worden verzonden",
+ "appSharingToLevel5": "{0}: alleen overdracht toestaan naar andere door beleid beheerde apps en bestandsoverdracht naar andere met MDM beheerde apps op ingeschreven apparaten",
+ "appSharingToLevel6": "{0}: alleen overdracht toestaan naar andere door beleid beheerde apps en dialoogvensters voor openen in/delen van het besturingssysteem filteren om alleen door beleid beheerde apps weer te geven",
+ "assignmentFilterEdit1": "Als u toewijzingsfilters toepast op dit beleid, wordt de eigenschap 'Apparaatbeheertype' toegepast naast de waarden die zijn opgegeven voor 'Doel op apps op alle apparaattypen' en 'Apparaattypen' op de pagina 'Apps'.",
+ "assignmentFilterEdit2": "Meer informatie over het toewijzen van app-beveiligingsbeleid.",
+ "conditionalEncryption1": "Selecteer {0} om app-versleuteling voor interne app-opslag uit te schakelen wanneer apparaatversleuteling op een geregistreerd apparaat wordt gedetecteerd.",
+ "conditionalEncryption2": "Opmerking: Intune kan alleen apparaatregistratie detecteren met Intune MDM. Externe app-opslag is nog wel versleuteld om ervoor te zorgen dat gegevens niet toegankelijk zijn voor onbeheerde toepassingen.",
+ "contactSyncMac": "Indien uitgeschakeld, kunnen apps geen contactpersonen opslaan in het systeemeigen adresboek.",
+ "contactsSync": "Kies Block om te voorkomen dat door beleid beheerde apps gegevens opslaan in de systeemeigen apps van het apparaat (zoals Contactpersonen, Agenda en widgets) of om het gebruik van invoegtoepassingen in de door beleid beheerde apps te voorkomen. Als u Allow kiest, kan de door beleid beheerde app gegevens opslaan in de systeemeigen apps of invoegtoepassingen gebruiken, als deze functies worden ondersteund en ingeschakeld in de door beleid beheerde app.
Apps kunnen extra configuratiemogelijkheden bieden met app-configuratiebeleid. Zie de documentatie van de app voor meer informatie.",
+ "deviceTypeTargetingCreate1": "Apparaattypetargeting is verplaatst naar de stap Toewijzingen bij het maken van beleid.",
+ "deviceTypeTargetingEdit1": "Als u toewijzingsfilters toepast op dit beleid, wordt de eigenschap 'Apparaatbeheertype' toegepast naast de waarden die zijn opgegeven voor 'Doel op apps op alle apparaattypen' en 'Apparaattypen' op de pagina 'Apps'.",
+ "deviceTypeTargetingEdit2": "Als u het apparaatbeheertypedoel wilt bewerken, stelt u 'Doel op apps op alle apparaattypen' = 'Ja' opnieuw in. Maak vervolgens een MAM-toewijzingsfilter met de gewenste waarden voor 'Apparaatbeheertype'.",
+ "deviceTypeTargetingHasMoved": "Meer informatie over het toewijzen van app-beveiligingsbeleid",
+ "encryptionAndroid1": "Voor apps die zijn gekoppeld met een Intune Mobile Application Management-beleid wordt versleuteling geleverd door Microsoft. Gegevens worden synchroon versleuteld tijdens I/O-bewerkingen in het bestand volgens de instellingen in het Mobile Application Management-beleid. Beheerde apps in Android gebruiken AES-128-versleuteling in de CBC-modus waarbij de versleutelingsbibliotheken van het platform worden gebruikt. De versleutelingsmethode is niet FIPS 140-2-compatibel. SHA-256-versleuteling wordt ondersteund als een expliciete instructie met de SigAlg-parameter en werkt alleen op apparaten met versie 4.2 en hoger. Inhoud in de apparaatopslag wordt altijd versleuteld.",
+ "encryptionAndroid2": "Wanneer u versleuteling vereist in uw app-beleid, moeten eindgebruikers een pincode instellen en gebruiken wanneer ze hun apparaat gebruiken. Als er geen pincode is ingesteld voor apparaattoegang, worden de apps niet gestart en zien eindgebruikers het volgende bericht: Uw bedrijf heeft vereist dat u eerst een apparaatpincode moet inschakelen om deze toepassing te gebruiken.",
+ "encryptionMac1": "Microsoft levert de versleuteling voor apps die zijn gekoppeld aan een Intune-beheerbeleid voor mobiele toepassingen. Gegevens worden synchroon versleuteld tijdens I/O-bewerkingen voor bestanden op basis van de instellingen in het beheerbeleid voor mobiele toepassingen. Beheerde apps in Mac gebruiken AES-128-versleuteling in de CBC-modus, waarbij de versleutelingsbibliotheken van het platform worden gebruikt. De versleutelingsmethode is niet FIPS 140-2-compatibel. SHA-256-versleuteling wordt ondersteund als expliciete instructie met de parameter SigAlg en werkt alleen op apparaten met versie 4.2 en hoger. De inhoud in de apparaatopslag wordt altijd versleuteld.",
+ "faceId1": "Indien van toepassing kunt u het gebruik van een gezichts-id toestaan in plaats van een pincode. Gebruikers wordt gevraagd een gezichts-id op te geven wanneer ze toegang tot deze app willen hebben met hun werkaccount.",
+ "faceId2": "Selecteer Ja om een gezichts-id toe te staan in plaats van een pincode voor toegang tot de app.",
+ "managementLevelsAndroid1": "U gebruikt deze optie om op te geven of dit beleid van toepassing is op apparaten met Android-apparaatbeheerder, Android Enterprise-apparaten of onbeheerde apparaten.",
+ "managementLevelsAndroid2": "{0}: Onbeheerde apparaten zijn apparaten waarop het Intune MDM-beheer niet is aangetroffen. Hierbij inbegrepen zijn MDM-leveranciers als derde partij.",
+ "managementLevelsAndroid3": "{0}: Door Intune beheerde apparaten met de Android Device Administration API.",
+ "managementLevelsAndroid4": "{0}: Door Intune beheerde apparaten met Android Enterprise-werkprofielen of volledig apparaatbeheer van Android Enterprise.",
+ "managementLevelsIos1": "U gebruikt deze optie om op te geven of dit beleid van toepassing is op door MDM beheerde apparaten of onbeheerde apparaten.",
+ "managementLevelsIos2": "{0}: Onbeheerde apparaten zijn apparaten waarop het Intune MDM-beheer niet is aangetroffen. Hierbij inbegrepen zijn MDM-leveranciers als derde partij.",
+ "managementLevelsIos3": "{0}: Beheerde apparaten zijn apparaten die worden beheerd door Intune MDM.",
+ "minAppVersion": "Het minimale app-versienummer definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
+ "minAppVersionWarning": "Het aanbevolen minimale app-versienummer definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
+ "minOsVersion": "Het minimale besturingssysteemversienummer definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
+ "minOsVersionWarning": "Het aanbevolen minimale besturingssysteemversienummer definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
+ "minPatchVersion": "Het oudste vereiste niveau van de Android-beveiligingspatch dat een gebruiker kan hebben om beveiligde toegang tot de app te krijgen.",
+ "minPatchVersionWarning": "Het oudste aanbevolen niveau van de Android-beveiligingspatch dat een gebruiker kan hebben om beveiligde toegang tot de app te krijgen.",
+ "minSdkVersion": "Het minimale versie van Intune Application Protection Policy SDK definiëren waarover de gebruiker moet beschikken om veilig toegang tot de app te krijgen.",
+ "requireAppPinDefault": "
Selecteer Ja om de pincode van de app uit te schakelen wanneer een apparaatvergrendeling wordt gedetecteerd op een ingeschreven apparaat.
",
+ "targetAllApps1": "U gebruikt deze optie om uw beleid te richten op apps op apparaten met alle mogelijke beheerstatussen.",
+ "targetAllApps2": "Tijdens de oplossing van beleidsconflicten wordt deze instelling vervangen als een gebruiker een doelbeleid voor een specifieke beheerstatus heeft.",
+ "touchId2": "Selecteer {0} om voor toegang tot de app een vingerafdruk te vereisen in plaats van een pincode."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Geef op na hoeveel dagen de gebruiker de pincode opnieuw moet instellen.",
+ "previousPinBlockCount": "Met deze instelling geeft u het aantal eerdere pincodes op dat door Intune wordt bewaard. Eventuele nieuwe pincodes moeten anders zijn dan de pincodes die in Intune worden bewaard."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Zodoende kunt u met Windows Search blijven zoeken in versleutelde gegevens.",
+ "authoritativeIpRanges": "Schakel deze instelling in als u de Windows-functie voor het automatisch detecteren van IP-bereiken wilt negeren.",
+ "authoritativeProxyServers": "Schakel deze instelling in als u de Windows-functie voor het automatisch detecteren van proxyservers wilt negeren.",
+ "checkInput": "Controleer de geldigheid van de invoer",
+ "dataRecoveryCert": "Een herstelcertificaat is een speciaal EFS-certificaat (Encrypting File System) dat u kunt gebruiken om versleutelde bestanden te herstellen als de versleutelingssleutel is zoekgeraakt of beschadigd. U moet het herstelcertificaat maken en hier opgeven. Klik hier voor meer informatie",
+ "enterpriseCloudResources": "
Geef op dat cloudresources worden behandeld als bedrijfsresources en worden beschermd met het Windows Information Protection-beleid. U kunt meerdere resources opgeven door afzonderlijke items met het teken | te scheiden.
Als in uw bedrijf een proxy is geconfigureerd, kunt u opgeven via welke proxy het verkeer naar de opgegeven cloudresources wordt geleid.
URL[,Proxy]|URL[,Proxy]
Zonder proxy: contoso.sharepoint.com|contoso.visualstudio.com Met proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Geef de IPv4-bereiken van het bedrijfsnetwerk op. Deze worden gebruikt in combinatie met de domeinnamen van het bedrijfsnetwerk die u opgeeft als grens van het bedrijfsnetwerk.
Deze instelling is vereist om Windows Information Protection in te schakelen.
U kunt meerdere bereikwaarden opgeven door afzonderlijke items met een komma te scheiden.\\
Geef de IPv6-bereiken van het bedrijfsnetwerk op. Deze worden gebruikt in combinatie met de domeinnamen van het bedrijfsnetwerk die u opgeeft als grens van het bedrijfsnetwerk.
U kunt meerdere bereikwaarden opgeven door afzonderlijke items met een komma te scheiden.
Als in uw bedrijf een proxy is geconfigureerd, kunt u opgeven via welke proxy het verkeer naar de cloudresources wordt geleid die zijn opgegeven in de instellingen voor bedrijfscloudresources.
U kunt meerdere waarden opgeven door afzonderlijke items met een puntkomma te scheiden
Geef de DNS-namen van het bedrijfsnetwerk op. Deze worden gebruikt in combinatie met de IP-bereiken die u opgeeft als grens van het bedrijfsnetwerk. U kunt meerdere waarden opgeven door afzonderlijke items met een komma te scheiden.
Deze instelling is vereist om Windows Information Protection in te schakelen.
Bijvoorbeeld: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Geef de DNS-namen van het bedrijfsnetwerk op. Deze worden gebruikt in combinatie met de IP-bereiken die u opgeeft als grens van het bedrijfsnetwerk. U kunt meerdere waarden opgeven door afzonderlijke items met een '|' te scheiden.
Deze instelling is vereist om Windows Information Protection in te schakelen.
Bijvoorbeeld: corp.contoso.com,region.contoso.com
",
+ "enterpriseProxyServers": "
Als uw bedrijfsnetwerk extern gerichte proxy's bevat, geeft u deze hier op. Wanneer u het adres van een proxyserver opgeeft, moet u ook opgeven via welke poort het verkeer is toegestaan en wordt beschermd met Windows Information Protection.
Opmerking: Deze lijst mag geen servers bevatten die voorkomen in de lijst met interne proxyservers van de onderneming. U kunt meerdere waarden opgeven door afzonderlijke items met een puntkomma te scheiden.
",
+ "maxInactivityTime1": "Hiermee geeft u de maximale hoeveelheid tijd op (in minuten) die het apparaat niet-actief mag zijn voordat het apparaat wordt vergrendeld met een pincode of wachtwoord. Gebruikers kunnen elke bestaande time-outwaarde opgeven die lager is dan de maximale tijd die is opgegeven in de app Instellingen. De Lumia 950 en 950XL hebben een maximale time-outwaarde van vijf minuten, ongeacht de waard die wordt ingesteld door dit beleid.",
+ "maxInactivityTime2": "0 (standaardinstelling): Er is geen time-out op gedefinieerd. De standaardinstelling 0 wordt geïnterpreteerd als 'Geen time-out gedefinieerd.'",
+ "maxPasswordAttempts1": "Dit beleid vertoont verschillend gedrag op een mobiel apparaat en een desktop.",
+ "maxPasswordAttempts2": "Wanneer op een mobiel apparaat de waarde wordt bereikt die is ingesteld door dit beleid, wordt het apparaat gewist.",
+ "maxPasswordAttempts3": "Wanneer een gebruiker op een desktop de waarde bereikt die is ingesteld door dit beleid, wordt de desktop niet gewist. In plaats daarvan wordt de BitLocker-herstelmodus ingeschakeld voor de desktop, waardoor de gegevens niet meer toegankelijk zijn, maar nog wel kunnen worden hersteld. Als BitLocker niet is ingeschakeld, kan het beleid niet worden afgedwongen.",
+ "maxPasswordAttempts4": "Voordat de gebruiker de limiet voor het aantal mislukte pogingen bereikt, wordt deze doorgestuurd naar het vergrendelingsscherm en gewaarschuwd dat bij nog meer mislukte pogingen de computer wordt vergrendeld. Wanneer de gebruiker de limiet bereikt, wordt het apparaat automatisch opnieuw opgestart en wordt de BitLocker-herstelpagina weergegeven. De gebruiker wordt gevraagd de BitLocker-herstelsleutel op deze pagina in te voeren.",
+ "maxPasswordAttempts5": "0 (standaardinstelling): het apparaat wordt nooit gewist nadat er een onjuiste pincode of onjuist wachtwoord is ingevoerd.",
+ "maxPasswordAttempts6": "De veiligste waarde is 0 als alle beleidswaarden = 0. Anders is de beleidswaarde Min de veiligste waarde.",
+ "mdmDiscoveryUrl": "Hier kunt u de URL van het eindpunt voor de MDM-registratie opgeven dat voor de registratie bij MDM wordt gebruikt. Dit wordt standaard opgegeven voor Intune.",
+ "minimumPinLength1": "Geheel getal waarmee het minimale aantal vereiste tekens voor de pincode wordt opgegeven. De standaardwaarde is 4. Het laagste getal dat u voor deze beleidsinstelling kunt configureren, is 4. Het hoogste getal dat u kunt configureren moet kleiner zijn dan het getal in de beleidsinstelling voor de maximale pincodelengte of het getal 127, afhankelijk van welke waarde lager is.",
+ "minimumPinLength2": "Als u deze beleidsinstelling configureert, moet de lengte van de pincode groter zijn dan of gelijk zijn aan dit getal. Als u deze beleidsinstelling uitschakelt of niet configureert, moet de lengte van de pincode groter zijn dan of gelijk zijn aan 4.",
+ "name": "De naam van deze netwerkgrens",
+ "neutralResources": "
Als uw bedrijf omleidingseindpunten voor verificatie heeft, moet u deze hier opgeven. De locaties die u hier opgeeft, worden noch als persoonlijk, noch als zakelijk beschouwd, afhankelijk van de context van de nieuwe verbinding.
U kunt meerdere waarden opgeven door afzonderlijke items met een komma te scheiden.
Bijvoorbeeld: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Waarde waarmee Windows Hello voor Bedrijven wordt ingesteld als methode voor de aanmelding bij Windows.",
+ "passportForWork2": "Standaard waarde is Waar. Als u dit beleid op Onwaar instelt, kan de gebruiker Windows Hello voor Bedrijven alleen inrichten op mobiele telefoons die zijn gekoppeld aan Microsoft Entra en waarvoor inrichting is vereist.",
+ "pinExpiration": "Het hoogste getal dat u voor deze beleidsinstelling kunt configureren, is 730. Het laagste getal dat u voor deze beleidsinstelling kunt configureren, is 0. Als dit beleid wordt ingesteld op 0, verloopt de pincode van de gebruiker nooit.",
+ "pinHistory1": "Het hoogste getal dat u voor deze beleidsinstelling kunt configureren is 50. Het laagste getal dat u voor deze beleidsinstelling kunt configureren is 0. Als dit beleid wordt ingesteld op 0, hoeven eerder gebruikte pincodes niet verplicht worden opgeslagen.",
+ "pinHistory2": "De huidige pincode van de gebruiker in de set pincodes die is gekoppeld aan het gebruikersaccount. Als een pincode opnieuw wordt ingesteld, wordt de pincodegeschiedenis niet bewaard.",
+ "protectUnderLock": "Beschermt de app-inhoud wanneer het apparaat zich in een vergrendelde status bevindt.",
+ "protectionModeBlock": "
Blokkeren: er wordt voorkomen dat ondernemingsgegevens de app kunnen verlaten.
",
+ "protectionModeOff": "
Uit: De gebruiker kan gegevens verplaatsen buiten de beveiligde apps. Er worden geen acties geregistreerd in het logboek.
",
+ "protectionModeOverride": "
Onderdrukkingen toestaan: De gebruiker wordt om invoer gevraagd wanneer deze gegevens van een beveiligde naar een niet-beveiligde app probeert te verplaatsen. Als de gebruiker ervoor kiest deze prompt te negeren, wordt de actie geregistreerd in het logboek.
",
+ "protectionModeSilent": "
Stil:De gebruiker kan gegevens verplaatsen buiten de beveiligde apps. Deze acties worden geregistreerd in het logboek.
",
+ "required": "Vereist",
+ "revokeOnMdmHandoff": "Toegevoegd aan Windows 10, versie 1703. Met dit beleid wordt bepaald of de WIP-sleutels worden ingetrokken als er voor een apparaat een upgrade wordt uitgevoerd van MAM naar MDM. Indien ingesteld op Uit, worden de sleutels niet ingetrokken en heeft de gebruikers na de upgrade nog toegang tot de beschermde bestanden. Dit wordt aanbevolen als de MDM-service is geconfigureerd met dezelfde WIP EnterpriseID als de MAM-service.",
+ "revokeOnUnenroll": "Als de registratie van een apparaat voor dit beleid ongedaan wordt gemaakt, worden de versleutelingssleutels ingetrokken.",
+ "rmsTemplateForEdp": "De TemplateID GUID die moet worden gebruikt voor RMS-versleuteling. De IT-beheerder kan met de Azure RMS-sjabloon configureren wie toegang tot het met RMS beveiligde bestand heeft en hoe lang.",
+ "showWipIcon": "Door een overlay met een pictogram toe te voegen, kan de gebruiker zien of er sprake is van een bedrijfscontext.",
+ "useRmsForWip": "Hiermee wordt aangegeven of Azure RMS-versleuteling is toegestaan voor WIP."
+ },
+ "requireAppPin": "
Selecteer Ja om de pincode van de app uit te schakelen wanneer een apparaatvergrendeling wordt gedetecteerd op een ingeschreven apparaat.
Opmerking: met Intune kan apparaatinschrijving niet worden gedetecteerd met een EMM-oplossing van derden in iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Aangepast script maken",
+ "edit": "Aangepast script bewerken"
+ },
+ "basicInfo": "Maak een nieuw aangepast scriptpakket op basis van detectie- en herstelscripts die u hebt geschreven.",
+ "customScriptCapitalized": "Aangepast script",
+ "customScriptLowercase": "aangepast script",
+ "detectionScript": "Detectiescript"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Standaard",
+ "header": "Updateprioriteit",
+ "postponed": "Uitgesteld",
+ "priority": "Hoge prioriteit"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Automatisch bijwerken",
+ "sublabel": "Als vervangende app(s) door de gebruiker zijn geïnstalleerd vanuit de bedrijfsportal, moet de vervangende app worden geïnstalleerd."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Achtergrond",
+ "displayText": "Inhoud downloaden in {0}",
+ "foreground": "Voorgrond",
+ "header": "Prioriteit van leveringsoptimalisatie"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Gebruiker toestaan de melding voor opnieuw opstarten uit te stellen",
+ "countdownDialog": "Selecteer wanneer u het afteldialoogvenster voor opnieuw opstarten wilt weergeven voordat het opnieuw opstarten plaatsvindt (in minuten)",
+ "durationInMinutes": "Respijtperiode voor opnieuw opstarten van apparaat (in minuten)",
+ "snoozeDurationInMinutes": "De uitstelduur (in minuten) selecteren"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Tijdzone",
+ "local": "Tijdzone van apparaat",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Datum en tijd",
+ "deadlineTimeColumnLabel": "Installatiedeadline",
+ "deadlineTimeDatePickerErrorMessage": "De geselecteerde datum moet na de beschikbare datum vallen",
+ "deadlineTimeLabel": "Deadline voor app-installatie",
+ "defaultTime": "Zo spoedig mogelijk",
+ "infoText": "Deze toepassing is beschikbaar zodra deze is geïmplementeerd, tenzij u hieronder een beschikbaarheidstijd opgeeft. Als dit een vereiste toepassing is, kunt u de deadline voor de installatie opgeven.",
+ "specificTime": "Een specifieke datum en tijd",
+ "startTimeColumnLabel": "Beschikbaarheid",
+ "startTimeDatePickerErrorMessage": "De geselecteerde datum moet eerder zijn dan de datum van de deadline",
+ "startTimeLabel": "App-beschikbaarheid"
+ },
+ "restartGracePeriodHeader": "Respijtperiode voor opnieuw opstarten",
+ "restartGracePeriodLabel": "Respijtperiode voor opnieuw opstarten van het apparaat",
+ "summaryTitle": "Ervaring voor eindgebruikers"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "U moet het aangepaste kenmerk aan ten minste één groep toewijzen. Ga naar Eigenschappen om toewijzingen te bewerken.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Shell-script",
"successfullySavedPolicy": "{0} opgeslagen"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64-bits",
+ "thirtyTwoBit": "32-bits"
+ },
+ "Countries": {
+ "ae": "Verenigde Arabische Emiraten",
+ "ag": "Antigua en Barbuda",
+ "ai": "Anguilla",
+ "al": "Albanië",
+ "am": "Armenië",
+ "ao": "Angola",
+ "ar": "Argentinië",
+ "at": "Oostenrijk",
+ "au": "Australië",
+ "az": "Azerbeidzjan",
+ "bb": "Barbados",
+ "be": "België",
+ "bf": "Burkina Faso",
+ "bg": "Bulgarije",
+ "bh": "Bahrein",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolivia",
+ "br": "Brazilië",
+ "bs": "Bahama's",
+ "bt": "Bhutan",
+ "bw": "Botswana",
+ "by": "Belarus",
+ "bz": "Belize",
+ "ca": "Canada",
+ "cg": "Republiek Congo",
+ "ch": "Zwitserland",
+ "cl": "Chili",
+ "cn": "China",
+ "co": "Colombia",
+ "cr": "Costa Rica",
+ "cv": "Republiek van Cabo Verde",
+ "cy": "Cyprus",
+ "cz": "Tsjechië",
+ "de": "Duitsland",
+ "dk": "Denemarken",
+ "dm": "Dominica",
+ "do": "Dominicaanse Republiek",
+ "dz": "Algerije",
+ "ec": "Ecuador",
+ "ee": "Estland",
+ "eg": "Egypte",
+ "es": "Spanje",
+ "fi": "Finland",
+ "fj": "Fiji",
+ "fm": "Federale Staten van Micronesia",
+ "fr": "Frankrijk",
+ "gb": "Verenigd Koninkrijk",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Griekenland",
+ "gt": "Guatemala",
+ "gw": "Guinee-Bissau",
+ "gy": "Guyana",
+ "hk": "Hongkong SAR",
+ "hn": "Honduras",
+ "hr": "Kroatië",
+ "hu": "Hongarije",
+ "id": "Indonesië",
+ "ie": "Ierland",
+ "il": "Israël",
+ "in": "India",
+ "is": "IJsland",
+ "it": "Italië",
+ "jm": "Jamaica",
+ "jo": "Jordanië",
+ "jp": "Japan",
+ "ke": "Kenia",
+ "kg": "Kirgistan",
+ "kh": "Cambodja",
+ "kn": "Saint Kitts en Nevis",
+ "kr": "Republiek Korea",
+ "kw": "Koeweit",
+ "ky": "Kaaimaneilanden",
+ "kz": "Kazachstan",
+ "la": "Democratische Volksrepubliek Laos",
+ "lb": "Libanon",
+ "lc": "Saint Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Litouwen",
+ "lu": "Luxemburg",
+ "lv": "Letland",
+ "md": "Republiek Moldavië",
+ "mg": "Madagaskar",
+ "mk": "Noord-Macedonië",
+ "ml": "Mali",
+ "mn": "Mongolië",
+ "mo": "Macau",
+ "mr": "Mauritanië",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Mexico",
+ "my": "Maleisië",
+ "mz": "Mozambique",
+ "na": "Namibië",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Nederland",
+ "no": "Noorwegen",
+ "np": "Nepal",
+ "nz": "Nieuw-Zeeland",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papoea-Nieuw-Guinea",
+ "ph": "Filippijnen",
+ "pk": "Pakistan",
+ "pl": "Polen",
+ "pt": "Portugal",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Roemenië",
+ "ru": "Rusland",
+ "sa": "Saoedi-Arabië",
+ "sb": "Salomonseilanden",
+ "sc": "Seychellen",
+ "se": "Zweden",
+ "sg": "Singapore",
+ "si": "Slovenië",
+ "sk": "Slowakije",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Suriname",
+ "st": "Sao Tomé en Principe",
+ "sv": "El Salvador",
+ "sz": "Swaziland",
+ "tc": "Turks- en Caicoseilanden",
+ "td": "Tsjaad",
+ "th": "Thailand",
+ "tj": "Tadzjikistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunesië",
+ "tr": "Turkije",
+ "tt": "Trinidad en Tobago",
+ "tw": "Taiwan",
+ "tz": "Tanzania",
+ "ua": "Oekraïne",
+ "ug": "Oeganda",
+ "us": "Verenigde Staten",
+ "uy": "Uruguay",
+ "uz": "Oezbekistan",
+ "vc": "St. Vincent en de Grenadines",
+ "ve": "Venezuela",
+ "vg": "Britse Maagdeneilanden",
+ "vn": "Vietnam",
+ "ye": "Jemen",
+ "za": "Zuid-Afrika",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Deze instelling kan niet worden geconfigureerd via OMA-URI, omdat deze beschikbaar is in de instellingencatalogus. Navigeer naar de instellingencatalogus om deze instelling te configureren."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Een configuratieprofielbestand selecteren"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Deze instellingen werken voor apparaten die met of zonder goedkeuring van de gebruiker zijn ingeschreven via apparaatinschrijving en voor apparaten die met behulp van geautomatiseerde apparaatinschrijving (voorheen DEP) zijn ingeschreven.",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Apparaatinschrijving en geautomatiseerde apparaatinschrijving",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Apparaatinschrijving en geautomatiseerde apparaatinschrijving",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Microsoft Launcher configureren op uw volledig beheerde apparaten.",
+ "deviceExperienceTypeDescription": "Op basis van de ervaring die u wilt configureren, selecteert u kioskmodus of Microsoft Launcher om de ervaring op uw apparaten te configureren. Als u geen type apparaatervaring selecteert, zien gebruikers de standaardervaring voor het startscherm van het apparaat.",
+ "deviceExperienceTypeKioskMode": "Kioskmodus (toegewezen en volledig beheerd)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Gebruik Microsoft Launcher om de startschermervaring aan te passen op de beheerde apparaten van uw organisatie. Als u Launcher instelt als standaard, kunnen apparaatgebruikers geen ander startprogramma gebruiken.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Microsoft Launcher instellen als standaardstartprogramma",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (alleen volledig beheerd)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Gebruikers kunnen de achtergrond niet wijzigen, tenzij u dit toestaat. Deze instelling is alleen beschikbaar als u een aangepaste achtergrond configureert.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Gebruiker toestaan de achtergrond te wijzigen",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Hiermee kunt u uw eigen afbeelding instellen als de achtergrond van het startscherm en kiezen of de gebruiker deze kan wijzigen. Als u geen aangepaste achtergrond configureert, wordt de huidige achtergrond van het apparaat behouden.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Aangepaste achtergrond configureren",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Deze afbeelding wordt weergegeven als de achtergrond op het startscherm van het apparaat. Dit veld is alleen beschikbaar als u een aangepaste achtergrond configureert.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "De URL van de achtergrondafbeelding invoeren",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Uitgeschakeld",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Verbergen",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Weergeven",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Als u de gebruiker toestaat de aanwezigheid van de dock te wijzigen, wordt de vorige instelling afgedwongen voor de eerste implementatie. Voor latere implementaties wordt de instelling niet afgedwongen voor alle wijzigingen die de gebruiker mogelijk heeft aangebracht. Deze instelling is alleen beschikbaar als u de aanwezigheid van het dock configureert.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Gebruiker toestaan de aanwezigheid van het dock te wijzigen",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Het dock is een menu dat gebruikers snel toegang tot hun apps en hulpprogramma's biedt. Wanneer de gebruikers zijn verborgen, moeten ze omhoog swipen om toegang te krijgen.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Aanwezigheid van dock",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Als u de gebruiker toestaat de feed in of uit te schakelen, wordt de vorige instelling afgedwongen voor de eerste implementatie. Voor latere implementaties wordt de instelling niet afgedwongen voor alle wijzigingen die de gebruiker mogelijk heeft aangebracht. Deze instelling is alleen beschikbaar als u de feed voor starten inschakelt.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Gebruiker toestaan om feed in/uit te schakelen",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "De feed is een extra scherm rechts van het startscherm waar gebruikers van het apparaat toegang hebben tot hun agenda's, documenten en recente activiteiten. Als u deze niet inschakelt, blijft de feed uitgeschakeld. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Feed voor starten inschakelen",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Plaatsing van zoekbalk",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Onder",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Verbergen",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Boven",
+ "deviceExperienceTypeName": "Type apparaatervaring",
"deviceGuardCredentialGuardDescription": "Inschakeling met UEFI-vergrendeling zorgt ervoor dat Credential Guard niet extern kan worden uitgeschakeld. Bij inschakeling zonder UEFI-vergrendeling kan Credential Guard extern worden uitgeschakeld via Groepsbeleid.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune-apparaat-id",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Het aantal dagen vóór het overstappen van automatisch opnieuw opstarten gepland buiten actieve uren naar gepland opnieuw opstarten waarvoor de gebruiker een planning moet opgeven.",
"engagedRestartTransitionScheduleName": "Gebruikers overzetten naar gepland opnieuw opstarten na automatisch opnieuw opstarten (dagen)",
"enhancedOption": "Verbeterd (1903 en eerder)",
- "enrollmentProfileTypeDedicatedDevice": "Toegewezen apparaat",
- "enrollmentProfileTypeDescription": "Selecteer een type inschrijvingsprofiel om Microsoft Launcher of door Microsoft beheerd startscherm op uw apparaten te configureren. Als u geen profieltype selecteert, zien gebruikers de standaardstartschermbelevenis van het apparaat.",
- "enrollmentProfileTypeFullyManaged": "Volledig beheerd",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Microsoft Launcher configureren op uw volledig beheerde apparaten.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Gebruik Microsoft Launcher om de startschermervaring aan te passen op de beheerde apparaten van uw organisatie. Als u Launcher instelt als standaard, kunnen apparaatgebruikers geen ander startprogramma gebruiken.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Microsoft Launcher instellen als standaardstartprogramma",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Gebruiker toestaan de achtergrond te wijzigen",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Hiermee kunt u uw eigen afbeelding instellen als de achtergrond van het startscherm en kiezen of de gebruiker deze kan wijzigen. Als u geen aangepaste achtergrond configureert, wordt de huidige achtergrond van het apparaat behouden.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Aangepaste achtergrond configureren",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Deze afbeelding wordt weergegeven als de achtergrond op het startscherm van het apparaat. Dit veld is alleen beschikbaar als u een aangepaste achtergrond configureert.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "De URL van de achtergrondafbeelding invoeren",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Uitgeschakeld",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Verbergen",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Weergeven",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Het dock is een menu dat gebruikers snel toegang tot hun apps en hulpprogramma's biedt. Wanneer de gebruikers zijn verborgen, moeten ze omhoog swipen om toegang te krijgen.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Aanwezigheid van dock",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Gebruiker toestaan om feed in/uit te schakelen",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "De feed is een extra scherm rechts van het startscherm waar gebruikers van het apparaat toegang hebben tot hun agenda's, documenten en recente activiteiten. Als u deze niet inschakelt, blijft de feed uitgeschakeld. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Feed voor starten inschakelen",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Plaatsing van zoekbalk",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Onder",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Verbergen",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Boven",
- "enrollmentProfileTypeName": "Type inschrijvingsprofiel",
"enrollmentSettingsHeading": "Inschrijvingsinstellingen",
"enterOnlyOneForDns": "Voer een lijst met DNS-servers en/of een proxyserver in.",
"enterpriseModeLoggingExample": "bijvoorbeeld http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Volledig beheerde apparaten met een werkprofiel in bedrijfseigendom",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Deze instellingen werken alleen voor volledig beheerde en toegewezen apparaten.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Volledig beheerde en toegewezen apparaten",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Deze instellingen werken alleen voor volledig beheerde en toegewezen apparaten die werken met een kioskbeleid.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Volledig beheerde en toegewezen apparaten (alleen kioskmodus)",
"gameCenterBlockedMacDescription": "Met Ja schakelt u Game Center uit en wordt het pictogram Game Center verwijderd uit het startscherm. Beschikbaar voor apparaten met macOS-versies 10.13 of hoger.",
"gameCenterBlockedMacName": "Game Center blokkeren",
"gamingPageDescription": "Toegang tot gaming blokkeren in de app Instellingen.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Hiermee configureert u het aanmeldingstype voor toegang tot de toepassingen op dit kioskapparaat.",
"kioskShowTaskbarDesc": "Hiermee geeft u de Windows-taakbalk op de kiosk weer of verbergt u deze.",
"kioskShowTaskbarName": "Windows-taakbalk",
+ "kioskSingleInfoBoxText": "Kioskmodus voor één app - Vergrendelt het apparaat om de geselecteerde app uit te voeren. Als u deze modus wilt gebruiken, moet u eerst de geselecteerde app goedkeuren en toewijzen vanuit de workload van de client-apps. Op volledig beheerde apparaten is Managed Home Screen de enige geselecteerde app die van toepassing is. Alle andere apps worden in plaats daarvan behandeld als een vereiste app.",
"kioskStartDateTime": "Begintijd van onderhoudsvenster",
"kioskStartMenuLayoutXmlDesc": "Geef een XML-indeling op die bepaalt in welke volgorde apps moeten worden weergegeven in het menu Start",
"kioskStartMenuLayoutXmlDescV2": "Als u een XML-bestand importeert waarmee de indeling van het Startmenu wordt geconfigureerd, worden de bestaande weergavevolgorde en de geselecteerde tegelgrootten overschreven. Meer informatie",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Moet een geldig bestandspad zijn",
"mustBeAValidHttpsUrl": "Moet een geldige HTTPS URL zijn",
"mustBeAValidIPAddress": "Het moet een geldig IP-adres zijn (bijvoorbeeld 192.168.0.1 of 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "De waarde moet een geldig IP-adres of een geldige FQDN met een optioneel poortnummer zijn.",
"mustBeAValidIPv4Address": "Het moet een geldig IPv4-adres zijn (bijvoorbeeld 192.168.0.1)",
"mustBeAValidIPv6Address": "Het moet een geldig IPv6-adres zijn (bijvoorbeeld 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Moet een geldige afbeeldings-URL zijn, zoals www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Regels voor Windows Firewall uit het lokale archief (openbare netwerken)",
"publicNetworkName": "Openbaar netwerk (niet-detecteerbaar)",
"publicOutboundConnectionsSummaryLabel": "De standaardactie voor uitgaande verbindingen (openbare netwerken)",
- "publicPlayStoreEnabledDescription": "Gebruikers krijgen toegang tot alle apps, met uitzondering van de apps waarvoor u bij Client-apps verwijdering hebt vereist. Als u voor deze instelling Niet geconfigureerd kiest, hebben gebruikers alleen toegang tot de apps die u bij Client-apps hebt vermeld als beschikbaar of vereist.",
+ "publicPlayStoreEnabledDescription": "Als u Toestaan selecteert, krijgen gebruikers toegang tot alle apps, met uitzondering van de apps die u moet verwijderen in Client-apps. Als u 'Blokkeren' of 'Niet geconfigureerd' kiest voor deze instelling, hebben gebruikers alleen toegang tot de apps die u hebt vermeld als beschikbaar of vereist in client-apps.",
"publicPlayStoreEnabledName": "Toegang tot alle apps in Google Play Store toestaan",
- "publicPlayStoreEnabledWarning": "Als u Toestaan selecteert, kunnen gebruikers apps installeren vanuit de Google Play Store. Als u later uw selectie wijzigt in Niet geconfigureerd, worden alle apps die niet expliciet zijn toegestaan voor de gebruiker van het apparaat verwijderd.",
+ "publicPlayStoreEnabledWarning": "Als u Toestaan selecteert, kunnen gebruikers apps installeren vanuit de Google Play Store. Als u uw selectie later wijzigt in Blokkeren of Niet geconfigureerd, worden alle apps van het apparaat verwijderd, met uitzondering van apps die u hebt vermeld als beschikbaar of vereist in client-apps.",
+ "publicPlayStoreSelectionAllowList": "Blokkeren",
+ "publicPlayStoreSelectionBlockList": "Toestaan",
+ "publicPlayStoreSelectionNotConfigured": "Niet geconfigureerd",
"publicShieldedSummaryLabel": "Afgeschermd (openbare netwerken)",
"publicStealthModeSummaryLabel": "Afgeschermde modus (openbare netwerken)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Unicast-antwoorden voor multicast-broadcasts (openbare netwerken)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Verwijderen...",
"photoLibrary": "Fotobibliotheek",
"pinCharSettingTooltip": "Voor een numerieke pincode kunnen alleen numerieke tekens worden gebruikt.\r\n\r\nVoor een wachtwoordcode gelden de volgende vereisten: alfanumerieke tekens en toegestane symbolen.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Belangrijk:Vanaf 1 juni 2024 krijgen apps met een SDK die ouder is dan 17.7.0 geen updates meer voor het app-beveiligingsbeleid. Gebruikers kunnen de app niet meer starten. Zorg ervoor dat gebruikers hun apps bijwerken en uw line-of-business-apps een recente SDK of wrapper gebruiken. Meer informatie",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Platform",
"platformDropDownLabel": "Platform",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Apparaat",
"licenseTypeUser": "Gebruiker"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Eigenschap",
- "rule": "Regel",
- "ruleDetails": "Regeldetails",
- "value": "Waarde"
- },
- "assignIf": "Profiel toewijzen als",
- "deleteWarning": "Hiermee wordt de geselecteerde regel voor toepasselijkheid verwijderd",
- "dontAssignIf": "Profiel niet toewijzen als",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "en nog {0}",
- "instructions": "Geef op hoe dit profiel moet worden toegepast binnen een toegewezen groep. Intune past het profiel alleen toe op apparaten die voldoen aan de gecombineerde criteria van deze regels.",
- "maxText": "Maximaal",
- "minText": "Minimaal",
- "noActionRow": "Er zijn geen regels voor toepasselijkheid opgegeven",
- "oSVersion": "bijvoorbeeld 1.2.3.4",
- "toText": "tot",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "Editie besturingssysteem",
- "windows10OsVersion": "Besturingssysteemversie",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Is gelijk aan",
- "greaterThan": "Groter dan",
- "greaterThanOrEqualTo": "Groter dan of gelijk aan",
- "lessThan": "Kleiner dan",
- "lessThanOrEqualTo": "Kleiner dan of gelijk aan",
- "notEqualTo": "Niet gelijk aan"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Controle van scripthandtekening afdwingen en script op de achtergrond uitvoeren",
- "enforceSignatureCheckTooltip": "Selecteer Ja om op te geven dat het script is ondertekend door een vertrouwde uitgever. Hierdoor kan het script worden uitgevoerd zonder waarschuwingen of prompts. Het script wordt niet geblokkeerd en uitgevoerd. Selecteer Nee (standaard) om het script uit te voeren met bevestiging door de eindgebruiker zonder handtekeningverificatie.",
- "header": "Een aangepast detectiescript gebruiken",
- "runAs32Bit": "Script uitvoeren als 32 bitsproces op 64 bitsclients",
- "runAs32BitTooltip": "Selecteer Ja als u het script in een 32 bitsproces op 64 bitsclients wilt uitvoeren. Selecteer Nee (standaard) als u het script in een 64 bitsproces op 64 bitsclients wilt uitvoeren. 32 bitsclients voeren het script uit in een 32 bitsproces.",
- "scriptContent": "Scriptinhoud",
- "scriptFile": "Scriptbestand",
- "scriptFileNotSelectedValidation": "Er is geen scriptbestand geselecteerd.",
- "scriptFileTooltip": "Selecteer een PowerShell-script waarmee de aanwezigheid van een app op de client wordt gedetecteerd. De app wordt gedetecteerd als het script zowel een afsluitcode van de waarde 0 retourneert als een tekenreekswaarde naar STDOUT schrijft.",
- "scriptSizeLimitValidation": "Het detectiescript overschrijdt de maximaal toegestane grootte. Los dit op door de grootte van het detectiescript te verkleinen."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Gemaakt op",
- "dateModified": "Gewijzigd op",
- "doesNotExist": "Het bestand of de map bestaat niet.",
- "fileOrFolderExists": "Bestand of map bestaat",
- "sizeInMB": "Grootte in MB",
- "version": "Tekenreeks (versie)"
- },
- "associatedWith32Bit": "Gekoppeld aan een 32 bitsapp op 64 bitsclients",
- "associatedWith32BitTooltip": "Selecteer Ja als u omgevingsvariabelen in het pad in de 32 bitscontext op 64 bitsclients wilt uitbreiden. Selecteer Nee (standaard) als u padvariabelen wilt uitbreiden in de 64 bitscontext op 64 bitsclients. 32 bitsclients gebruiken altijd de 32 bitscontext.",
- "detectionMethod": "Detectiemethode",
- "detectionMethodTooltip": "Selecteer het type detectiemethode voor het valideren van de aanwezigheid van de app.",
- "fileOrFolder": "Bestand of map",
- "fileOrFolderToolTip": "Het bestand of de map voor de detectie.",
- "operator": "Operator",
- "operatorTooltip": "Selecteer de operator voor de detectiemethode voor het valideren van de vergelijking.",
- "path": "Pad",
- "pathTooltip": "Het volledige pad van de map met het bestand of de map die u wilt detecteren.",
- "value": "Waarde",
- "valueTooltip": "Selecteer een waarde die overeenkomt met de geselecteerde detectiemethode. Methoden voor datumdetectie moeten in de lokale tijd worden ingevoerd."
- },
- "GridColumns": {
- "pathOrCode": "Pad/code",
- "type": "Type"
- },
- "MsiRule": {
- "operator": "Operator",
- "operatorTooltip": "Selecteer de operator voor de validatievergelijking van de MSI-productversie.",
- "productCode": "MSI-productcode",
- "productCodeTooltip": "Een geldige MSI-productcode voor de app.",
- "productVersion": "Waarde",
- "productVersionCheck": "Versiecontrole van MSI-product",
- "productVersionCheckTooltip": "Selecteer Ja om de MSI-productversie en de MSI-productcode te controleren.",
- "productVersionTooltip": "Voer de MSI-productversie voor de app in."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Vergelijking van geheel getal",
- "keyDoesNotExist": "Sleutel bestaat niet",
- "keyExists": "Sleutel bestaat",
- "stringComparison": "Vergelijking van tekenreeks",
- "valueDoesNotExist": "Waarde bestaat niet",
- "valueExists": "Waarde bestaat",
- "versionComparison": "Vergelijking van versies"
- },
- "associatedWith32Bit": "Gekoppeld aan een 32 bitsapp op 64 bitsclients",
- "associatedWith32BitTooltip": "Selecteer Ja als u het 32 bitsregister op 64 bitsclients wilt zoeken. Selecteer Nee (standaard) as u het 64 bitsregister op 64 bitsclients wilt zoeken. 32 bitsclients zoeken altijd naar het 32 bitsregister.",
- "detectionMethod": "Detectiemethode",
- "detectionMethodTooltip": "Selecteer het type detectiemethode voor het valideren van de aanwezigheid van de app.",
- "keyPath": "Sleutelpad",
- "keyPathTooltip": "Het volledige pad van de registervermelding die de waarde bevat die u wilt detecteren.",
- "operator": "Operator",
- "operatorTooltip": "Selecteer de operator voor de detectiemethode voor het valideren van de vergelijking.",
- "value": "Waarde",
- "valueName": "Waardenaam",
- "valueNameTooltip": "De naam van de registerwaarde die u wilt detecteren.",
- "valueTooltip": "Selecteer een waarde die overeenkomt met de geselecteerde detectiemethode."
- },
- "RuleTypeOptions": {
- "file": "Bestand",
- "mSI": "MSI",
- "registry": "Register"
- },
- "gridAriaLabel": "Detectieregels",
- "header": "Maak een regel die de aanwezigheid van de app aangeeft.",
- "noRulesSelectedPlaceholder": "Er zijn geen machtigingen opgegeven.",
- "ruleTableLimit": "U kunt maximaal 25 detectieregels toevoegen",
- "ruleType": "Regeltype",
- "ruleTypeTooltip": "Kies het type detectieregel dat u wilt toevoegen."
- },
- "RuleConfigurationOptions": {
- "customScript": "Een aangepast detectiescript gebruiken",
- "manual": "Detectieregels handmatig configureren"
- },
- "bladeTitle": "Detectieregels",
- "header": "Configureer specifieke regels voor de app voor het bepalen van de aanwezigheid van de app.",
- "rulesFormat": "Regelnotatie",
- "rulesFormatTooltip": "Kies of u de detectieregels handmatig wilt configureren of een aangepast script wilt gebruiken voor het detecteren van de aanwezigheid van de app.",
- "selectorLabel": "Detectieregels"
+ "BooleanActions": {
+ "allow": "Toestaan",
+ "block": "Blokkeren",
+ "configured": "Geconfigureerd",
+ "disable": "Uitschakelen",
+ "dontRequire": "Niet vereisen",
+ "enable": "Inschakelen",
+ "hide": "Verbergen",
+ "limit": "Limiet",
+ "notConfigured": "Niet geconfigureerd",
+ "require": "Vereisen",
+ "show": "Weergeven",
+ "yes": "Ja"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Aanbevolen SmartScreen-instellingen voor de Microsoft Edge-app: Windows 10 in cloudconfiguratiesjabloon. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Eindpuntdetectie en -reactie"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "App- en browserisolatie",
- "aSRApplicationControl": "Toepassingsbeheer",
- "aSRAttackSurfaceReduction": "Regels voor het verminderen van kwetsbaarheid voor aanvallen",
- "aSRDeviceControl": "Apparaatbeheer",
- "aSRExploitProtection": "Exploit Protection",
- "aSRWebProtection": "Webbeveiliging (Microsoft Edge verouderd)",
- "aVExclusions": "Microsoft Defender Antivirus-uitsluitingen",
- "antivirus": "Microsoft Defender Antivirus",
- "cloudPC": "Windows 365-beveiligingsbasislijn",
- "default": "Eindpuntbeveliging",
- "defenderTest": "Demo voor Microsoft Defender for Endpoint",
- "diskEncryption": "BitLocker",
- "eDR": "Eindpuntdetectie en -reactie",
- "edgeSecurityBaseline": "Microsoft Edge-basislijn",
- "edgeSecurityBaselinePreview": "Preview-versie: Microsoft Edge-basislijn",
- "editionUpgradeConfiguration": "Editie-upgrade en modus wisselen",
- "firewall": "Windows Firewall",
- "firewallRules": "Windows Firewall-regels",
- "identityProtection": "Accountbeveiliging",
- "identityProtectionPreview": "Accountbeveiliging (preview)",
- "mDMSecurityBaseline1810": "MDM-beveiligingsbasislijn voor Windows 10 en hoger voor oktober 2018",
- "mDMSecurityBaseline1810Preview": "Preview: MDM-beveiligingsbasislijn voor Windows 10 en hoger voor oktober 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM-beveiligingsbasislijn voor Windows 10 voor oktober 2018 (bètaversie)",
- "mDMSecurityBaseline1906": "MDM-beveiligingsbasislijn voor Windows 10 en hoger voor mei 2019",
- "mDMSecurityBaseline2004": "MDM-beveiligingsbasislijn voor Windows 10 en hoger voor augustus 2020",
- "mDMSecurityBaseline2101": "MDM-beveiligingsbasislijn voor Windows 10 en later december 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS-firewall",
- "microsoftDefenderBaseline": "Basislijn voor Microsoft Defender for Endpoint",
- "office365Baseline": "Microsoft Office O365-basislijn",
- "office365BaselinePreview": "Preview: Microsoft Office O365-basislijn",
- "securityBaselines": "Beveiligingsbasislijnen",
- "test": "Testsjabloon",
- "testFirewallRulesSecurityTemplateName": "Windows Firewall-regels (test)",
- "testIdentityProtectionSecurityTemplateName": "Accountbeveiliging (test)",
- "windowsSecurityExperience": "Windows-beveiligingservaring"
- },
- "Firewall": {
- "mDE": "Windows Firewall"
- },
- "FirewallRules": {
- "mDE": "Windows Firewall-regels"
- },
- "OneDriveKnownFolderMove": {
- "description": "Instellingen voor het verplaatsen van bekende mappen in OneDrive: Windows 10 in de cloudconfiguratiesjabloon. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Accountbeveiliging",
- "administrativeTemplates": "Beheersjablonen",
- "androidCompliancePolicy": "Nalevingsbeleid van Android",
- "aospDeviceOwnerCompliancePolicy": "Nalevingsbeleid van Android (AOSP)",
- "applicationControl": "App-beheer voor Bedrijven",
- "attackSurfaceReductionRules": "Regels voor het verminderen van kwetsbaarheid voor aanvallen",
- "bitlocker": "BitLocker",
- "custom": "Aangepast",
- "deliveryOptimization": "Delivery Optimization",
- "derivedPersonalIdentityVerificationCredential": "Afgeleide referentie",
- "deviceControl": "Apparaatbeheer",
- "deviceFeatures": "Apparaatfuncties",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Apparaatvergrendeling",
- "deviceOwner": "Volledig beheerde en toegewezen werkprofielen in bedrijfseigendom",
- "deviceRestrictions": "Apparaatbeperkingen",
- "deviceRestrictionsWindows10Team": "Apparaatbeperkingen (Windows 10 Team)",
- "domainJoinPreview": "Domeindeelname",
- "editionUpgradeAndModeSwitch": "Editie-upgrade en modus wisselen",
- "education": "Educatief",
- "email": "E-mail",
- "emailSamsungKnoxOnly": "E-mail (alleen Samsung KNOX)",
- "endpointProtection": "Endpoint Protection",
- "expeditedCheckin": "Configuratie voor Mobile Device Management",
- "exploitProtection": "Exploit Protection",
- "extensions": "Extensies",
- "hardwareConfigurations": "BIOS-configuraties en andere instellingen",
- "identityProtection": "Identity Protection",
- "iosCompliancePolicy": "Nalevingsbeleid van iOS",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Lidmaatschap van lokale gebruikersgroep",
- "macCompliancePolicy": "Nalevingsbeleid van Mac",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Beveiligingsbasislijn voor Microsoft 365-apps voor ondernemingen",
- "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus-uitsluitingen",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender voor Eindpunt (desktopapparaten met Windows 10 of hoger)",
- "microsoftDefenderFirewallRules": "Windows Firewall-regels",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Beveiligingsbasislijn voor Microsoft Edge",
- "mxProfileZebraOnly": "MX-profiel (alleen Zebra)",
- "networkBoundary": "De grens van het netwerk",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Groepsbeleid overschrijven",
- "pkcsCertificate": "PKCS-certificaat",
- "pkcsImportedCertificate": "Geïmporteerd PKCS-certificaat",
- "preferenceFile": "Voorkeursbestand",
- "presets": "Voorinstellingen",
- "scepCertificate": "SCEP-certificaat",
- "secureAssessmentEducation": "Veilige evaluatie (onderwijs)",
- "securityBaselineForHololens2Advanced": "Geavanceerde beveiligingsbasislijn voor HoloLens 2",
- "securityBaselineForHololens2Standard": "Standaardbeveiligingsbasislijn voor HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Beveiligingsbasislijn voor Microsoft Edge",
- "settingsCatalog": "Catalogus met instellingen",
- "sharedMultiUserDevice": "Gedeeld apparaat voor meerdere gebruikers",
- "softwareUpdates": "Software-updates",
- "trustedCertificate": "Vertrouwd certificaat",
- "unknown": "Onbekend",
- "unsupported": "Niet-ondersteund",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi importeren",
- "windows10CompliancePolicy": "Nalevingsbeleid van Windows 10/11",
- "windows10MobileCompliancePolicy": "Nalevingsbeleid van Windows 10 Mobile",
- "windows10XScep": "SCEP-certificaat - TEST",
- "windows10XTrustedCertificate": "Vertrouwd certificaat - TEST",
- "windows10XVPN": "VPN - TEST",
- "windows10XWifi": "Wi-Fi - TEST",
- "windows11SecurityBaseline": "Beveiligingsbasislijn voor Windows 10 en hoger",
- "windows365SecurityBaseline": "Windows 365-beveiligingsbasislijn",
- "windows8CompliancePolicy": "Nalevingsbeleid van Windows 8",
- "windowsHealthMonitoring": "Windows-statuscontrole",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Nalevingsbeleid van Windows Phone",
- "windowsUpdateforBusiness": "Windows Update voor Bedrijven",
- "wiredNetwork": "Bekabeld netwerk",
- "workProfile": "Werkprofiel in persoonlijk eigendom"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Update geleidelijk aan beschikbaar maken",
- "immediateStart": "Update zo snel mogelijk beschikbaar maken",
- "startDateOnly": "Update op een specifieke datum beschikbaar maken"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Beheerde apparaten",
- "devicesWithoutEnrollment": "Beheerde apps"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filter",
- "assignmentFilterTypeColumnHeader": "Filtermodus",
- "assignmentToast": "Meldingen van eindgebruiker",
- "assignmentTypeTableHeader": "TOEWIJZINGSTYPE",
- "autoUpdate": "Automatisch bijwerken",
- "deadlineTimeColumnLabel": "Installatiedeadline",
- "deliveryOptimizationPriorityHeader": "Delivery Optimization-prioriteit",
- "groupTableHeader": "Groep",
- "installContextLabel": "Context installeren",
- "isRemovable": "Installeren als verwisselbaar",
- "licenseTypeLabel": "Licentietype",
- "modeTableHeader": "Groepsmodus",
- "policySet": "Beleidsset",
- "preventAutoAppUpdate": "Automatische app-updates voorkomen",
- "preventManagedAppBackup": "Back-up van iCloud-app voorkomen",
- "restartGracePeriodHeader": "Respijtperiode voor opnieuw opstarten",
- "startTimeColumnLabel": "Beschikbaarheid",
- "tracks": "Tracks",
- "uninstallOnRemoval": "Verwijderen bij verwijdering van apparaat",
- "updateMode": "Updateprioriteit",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD-web-app",
- "androidEnterpriseSystemApp": "Android Enterprise-systeem-app",
- "androidForWorkApp": "Beheerde Google Play Store-app",
- "androidLobApp": "Line-Of-Business-app voor Android",
- "androidStoreApp": "Android Store-app",
- "builtInAndroid": "Ingebouwde Android-app",
- "builtInApp": "Ingebouwde app",
- "builtInIos": "Ingebouwde iOS-app",
- "iosIPadOSWebClip": "iOS/iPadOS-webclip",
- "iosLobApp": "Line-Of-Business-app voor iOS",
- "iosStoreApp": "iOS Store-app",
- "iosVppApp": "Volume Purchase Program-app voor iOS",
- "lineOfBusinessApp": "Line-Of-Business-app",
- "macOSDmgApp": "macOS-app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Line-Of-Business-app voor macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office-suite",
- "macOSPkgApp": "macOS-app (PKG)",
- "macOSWebClip": "Webclip voor macOS",
- "macOsVppApp": "Volume Purchase Program-app voor macOS",
- "managedAndroidLobApp": "Beheerde Line-Of-Business-app voor Android",
- "managedAndroidStoreApp": "Beheerde Android Store-app",
- "managedGooglePlayApp": "Beheerde Google Play Store-app",
- "managedGooglePlayPrivateApp": "Persoonlijke beheerde Google Play-app",
- "managedGooglePlayWebApp": "Webkoppeling voor beheerde Google Play",
- "managedIosLobApp": "Beheerde Line-Of-Business-app voor iOS",
- "managedIosStoreApp": "Beheerde iOS Store-app",
- "microsoftStoreForBusinessApp": "Microsoft Store voor Bedrijven-app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store voor Bedrijven",
- "officeAddIn": "Office-invoegtoepassing",
- "officeSuiteApp": "Microsoft 365-apps (Windows 10 en hoger)",
- "sharePointApp": "SharePoint-app",
- "teamsApp": "Teams-app",
- "webApp": "Webkoppeling",
- "win32CatalogApp": "Windows-catalogus-app (Win32)",
- "winGetPublicApp": "Opslagplaats van de community van Windows-pakketbeheerder",
- "winGetStoreApp": "Microsoft Store-app (nieuw)",
- "windowsAppXLobApp": "AppX Line-Of-Business-app voor Windows",
- "windowsClassicApp": "Windows-app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 en hoger)",
- "windowsMobileMsiLobApp": "MSI Line-Of-Business-app voor Windows",
- "windowsPhone81AppXBundleLobApp": "AppX Line-Of-Business-app voor Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "AppX Line-Of-Business-app voor Windows Phone 8.1",
- "windowsPhone81StoreApp": "Windows Phone 8.1 Store-app",
- "windowsPhoneXapLobApp": "XAP Line-Of-Business-app voor Windows Phone",
- "windowsStoreApp": "Microsoft Store-app (verouderd)",
- "windowsUniversalAppXLobApp": "Universele AppX Line-Of-Business-app voor Windows",
- "windowsUniversalLobApp": "Universele Line-Of-Business-app voor Windows",
- "windowsWebApp": "Windows-webkoppeling"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Uitgesloten",
- "include": "Inbegrepen",
- "includeAllDevicesVirtualGroup": "Inbegrepen",
- "includeAllUsersVirtualGroup": "Inbegrepen"
- },
- "AssignmentToast": {
- "hideAll": "Alle pop-upmeldingen verbergen",
- "showAll": "Alle pop-upmeldingen weergeven",
- "showReboot": "Pop-upmeldingen voor de computer opnieuw opstarten weergeven"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Ja",
- "notConfigured": "Nee"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Achtergrond",
- "displayText": "Inhoud downloaden in {0}",
- "foreground": "Voorgrond",
- "header": "Delivery Optimization-prioriteit"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "Na installatie van de app kan opnieuw opstarten van het apparaat worden afgedwongen",
- "basedOnReturnCode": "Bepaal bedrag op basis van retourcodes",
- "force": "Via Intune wordt opnieuw opstarten van het apparaat afgedwongen",
- "suppress": "Geen specifieke actie"
- },
- "FilterType": {
- "exclude": "Uitsluiten",
- "include": "Opnemen",
- "none": "Geen"
- },
- "InstallIntent": {
- "available": "Beschikbaar voor ingeschreven apparaten",
- "availableWithoutEnrollment": "Beschikbaar met of zonder inschrijving",
- "notApplicable": "Niet van toepassing",
- "required": "Vereist",
- "uninstall": "Verwijderen"
- },
- "SettingType": {
- "assignmentType": "Toewijzingstype",
- "deviceLicensing": "Licentietype",
- "installContext": "Verwijderen bij verwijdering van apparaat",
- "toastSettings": "Meldingen van eindgebruiker",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Standaard",
- "postponed": "Uitgesteld",
- "priority": "Hoge prioriteit"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Configureer apparaten voor de eerste inrichting.",
- "title": "Apparaatvoorbereiding"
- },
- "EnrollmentSettings": {
- "description": "Inschrijvingsinstellingen configureren, zoals het blokkeren van de inschrijving en toewijzen aan gebruikers.",
- "title": "Inschrijvingsinstellingen"
- },
- "OSConfiguration": {
- "menuDescription": "Configureer instellingen waarmee gebruikers Windows kunnen herstellen van een opstartbaar flashstation.",
- "menuTitle": "Herstelconfiguratie van Windows-besturingssysteem"
- },
- "coManagementAuthorityDesc": "Co-beheerinstellingen configureren voor Configuration Manager-integratie",
- "coManagementAuthorityTitle": "Instellingen voor co-beheer ",
- "deploymentProfiles": "Windows AutoPilot-implementatieprofielen",
- "description": "Meer informatie over de zeven verschillende manieren waarop een Windows 10/11-pc kan worden ingeschreven bij Intune door gebruikers of beheerders.",
- "descriptionLabel": "Windows-inschrijvingsmethoden",
- "enrollmentStatusPage": "Pagina Status van de inschrijving"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Alle aanbevolen stuurprogramma-updates automatisch goedkeuren",
- "manual": "Stuurprogramma-updates handmatig goedkeuren en implementeren"
- },
- "BulkActions": {
- "button": "Bulkacties"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Goedkeuringsmethode:"
- },
- "DeploymentDeferralInDays": {
- "label": "Updates beschikbaar stellen na",
- "units": "(dagen)",
- "value": "{0} dagen"
- },
- "DriverAction": {
- "header": "Selecteer hieronder een actie.",
- "label": "Stuurprogramma-actie",
- "placeholder": "Selecteer een actie"
- },
- "IncludedDrivers": {
- "label": "Inbegrepen stuurprogramma's"
- },
- "SelectDrivers": {
- "header": "Selecteer stuurprogramma's die u wilt opnemen in uw bulkactie"
- },
- "SelectDriversToInclude": {
- "button": "Stuurprogramma's selecteren die moeten worden opgenomen"
- },
- "SelectLessDrivers": {
- "validation": "Er kunnen maximaal honderd stuurprogramma's worden geselecteerd"
- },
- "SelectMoreDrivers": {
- "validation": "Er moet minstens één stuurprogramma zijn geselecteerd."
- },
- "SelectedDrivers": {
- "label": "Geselecteerde stuurprogramma's"
- },
- "availabilityDate": "Beschikbaar maken in Windows Update",
- "bladeTitle": "Stuurprogramma-updates Windows 10 en hoger (preview)",
- "lastSync": "Laatste synchronisatie:",
- "lastSyncDefaultText": "Initiële inventarisverzameling in behandeling",
- "loadError": "Kan niet laden."
- },
- "DriverStatus": {
- "approved": "Goedgekeurd",
- "declined": "Afgewezen",
- "export": "Aanbevolen stuurprogramma's exporteren",
- "needsReview": "Beoordeling vereist",
- "paused": "Onderbroken"
- },
- "DriversToReview": {
- "text": "{0} ter beoordeling"
- },
- "Subtitle": {
- "automatic": "Beleid voor automatische goedkeuring van stuurprogramma-updates",
- "manual": "Beleid voor handmatige goedkeuring van stuurprogramma-updates"
- },
- "SyncNotification": {
- "failure": "Kan {0} niet synchroniseren",
- "failureDescription": "Er is een fout opgetreden en de aangevraagde synchronisatie kan niet worden voltooid. Probeer het opnieuw.",
- "pending": "{0} synchronisatie wordt uitgevoerd",
- "pendingDescription": "De meest recente gegevens worden opgehaald. Dit proces kan enkele minuten duren.",
- "success": "{0} synchronisatie voltooid",
- "successDescription": "De synchronisatie met de WUfB-service is voltooid op {0}"
- },
- "SyncSpinner": {
- "text": "Er wordt een synchronisatie uitgevoerd. Dit kan enkele minuten duren. Zoek naar een waarschuwing of kom over een paar minuten terug."
- },
- "TabName": {
- "basics": "Basisinformatie",
- "driverUpdateSettings": "Instellingen",
- "otherDrivers": "Overige stuurprogramma's",
- "properties": "Eigenschappen",
- "recommendedDrivers": "Aanbevolen stuurprogramma's"
- },
- "driverAddFilter": "Filter toevoegen",
- "driverApplicableDevices": "Toepasselijke apparaten",
- "driverApprovalStatus": "Status",
- "driverBulkActions": "Bulkacties",
- "driverClass": "Stuurprogrammaklasse",
- "driverCount": "{0} t/m {1} van {2} records weergeven",
- "driverFilterNoneSelected": "Niets geselecteerd",
- "driverManufacturer": "Fabrikant",
- "driverName": "Stuurprogrammanaam",
- "driverNameLower": "windows stuurprogramma-update implementatie",
- "driverNameUpper": "Windows stuurprogramma-update implementatie",
- "driverRefresh": "Vernieuwen",
- "driverReleaseDate": "Releasedatum",
- "driverSearch": "Zoeken",
- "driverSearchKeyword": "Trefwoord voor zoeken invoeren",
- "driverVersion": "Versie",
- "firstDeploymentDate": "Eerste implementatie",
- "infoBoxText": "Nadat er een beleid is toegewezen en gemaakt, kan het 24 uur duren voordat de inventaris is ingevuld.",
- "textBlockText": "Selecteer uw beleidsinstellingen voor goedkeuring en implementatie. Stel een beleid in om updates automatisch of handmatig goed te keuren en te implementeren. De goedkeuringsmethode kan niet meer worden gewijzigd zodra een beleid is gemaakt, maar wijzigingen in afzonderlijke stuurprogramma-goedkeuringen en implementatiedetails zijn mogelijk zodra er een inventaris is gemaakt voor toegewezen apparaten."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Gebruik deze instellingen om op de hoogte blijven over welke gebruikers apps installeren die niet zijn goedgekeurd voor gebruik in uw bedrijf. Selecteer het type lijst voor beperkte apps:
\r\n Verboden apps - een lijst met apps waarover u een melding wilt ontvangen als gebruikers ze installeren. \r\n Goedgekeurde apps - een lijst met apps die zijn goedgekeurd voor gebruik in uw bedrijf. Wanneer gebruikers een app installeren die niet in deze lijst voorkomt, ontvangt u een melding. \r\n ",
- "androidZebraMxZebraMx": "Zebra-apparaten configureren door een MX-profiel in XML-indeling te uploaden.",
- "iosDeviceFeaturesAirprint": "Gebruik deze instellingen om iOS-apparaten zodanig te configureren dat ze automatisch verbinding maken met printers in uw netwerk die compatibel zijn met AirPrint. U hebt het IP-adres en het resourcepad van uw printers nodig.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Een app-extensie configureren waarmee eenmalige aanmelding (SSO) wordt ingeschakeld voor apparaten met iOS 13.0 of hoger.",
- "iosDeviceFeaturesHomeScreenLayout": "De indeling configureren voor het dock- en startscherm op iOS-apparaten. Bepaalde apparaten kennen limieten voor het aantal items dat kan worden weergegeven.",
- "iosDeviceFeaturesIOSWallpaper": "Een afbeelding weergeven die wordt weergegeven op het startscherm en/of het vergrendelingsscherm van iOS-apparaten.\r\n Als u op elke locatie een unieke afbeelding wilt weergeven, maakt u een profiel met een afbeelding voor het vergrendelingsscherm en een profiel met een afbeelding voor het startscherm.\r\n Wijs vervolgens beide profielen aan uw gebruikers toe.\r\n \r\n
\r\n
Maximale bestandsgrootte: 750 kB
\r\n
Bestandstype: PNG, JPG of JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Meldingsinstellingen voor apps opgeven. Ondersteunt iOS 9.3 en hoger.",
- "iosDeviceFeaturesSharedDevice": "Optionele tekst opgeven die wordt weergegeven op het vergrendelingsscherm. De functie wordt ondersteund voor iOS 9.3 en hoger. Meer informatie",
- "iosGeneralApplicationRestrictions": "Gebruik deze instellingen om op de hoogte blijven over welke gebruikers apps installeren die niet zijn goedgekeurd voor gebruik in uw bedrijf. Selecteer het type lijst voor beperkte apps:
\r\n Verboden apps - een lijst met apps waarover u een melding wilt ontvangen als gebruikers ze installeren. \r\n Goedgekeurde apps - een lijst met apps die zijn goedgekeurd voor gebruik in uw bedrijf. Wanneer gebruikers een app installeren die niet in deze lijst voorkomt, ontvangt u een melding. \r\n ",
- "iosGeneralApplicationVisibility": "In de lijst Apps weergeven kunt u de iOS-apps opgeven die gebruikers kunnen zien of starten. In de lijst met verborgen apps kunt u de iOS-apps opgeven die gebruikers niet kunnen zien of starten.",
- "iosGeneralAutonomousSingleAppMode": "Apps die u aan deze lijst toevoegt en toewijst aan een apparaat, kunnen het apparaat vergrendelen zodra de app is gestart, zodat alleen de desbetreffende app kan worden uitgevoerd. Of het apparaat kan worden vergrendeld terwijl er een bepaalde acties wordt uitgevoerd (bijvoorbeeld wanneer u een test maakt). Zodra de actie is voltooid of u de beperking verwijdert, keert het apparaat terug naar de normale status.",
- "iosGeneralKiosk": "Met de kioskmodus worden verschillende instellingen in een apparaat vergrendeld of wordt er één app gespecificeerd die op het apparaat mag worden uitgevoerd. Dit kan handig zijn wanneer er bijvoorbeeld in een winkel slechts één demo-app op het apparaat mag worden uitgevoerd.",
- "macDeviceFeaturesAirprint": "Gebruik deze instellingen om macOS-apparaten zodanig te configureren dat ze automatisch verbinding maken met printers in uw netwerk die compatibel zijn met AirPrint. U hebt het IP-adres en het resourcepad van uw printers nodig.",
- "macDeviceFeaturesAssociatedDomains": "De gekoppelde domeinen configureren voor het delen van gegevens en aanmeldingsreferenties tussen de apps en websites van uw organisatie. Dit profiel kan worden toegepast op apparaten met macOS 10.15 of hoger.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Een app-extensie configureren waarmee eenmalige aanmelding (SSO) wordt ingeschakeld voor apparaten met macOS 10.15 of hoger.",
- "macDeviceFeaturesLoginItems": "Kies welke apps, bestanden en mappen worden geopend wanneer gebruikers zich aanmelden bij hun apparaten. Als u niet wilt dat gebruikers de weergave van de geselecteerde apps kunnen wijzigen, kunt u de app verbergen in de gebruikersconfiguratie.",
- "macDeviceFeaturesLoginWindow": "Configureer het uiterlijk van het macOS-aanmeldingsscherm en de functies die beschikbaar zijn voor gebruikers voordat en nadat ze zich hebben aangemeld.",
- "macExtensionsKernelExtensions": "Met deze instellingen kunt u het beleid voor kernelextensies configureren op apparaten met macOS 10.13.2 of hoger.",
- "macGeneralDomains": "E-mailberichten die de gebruiker verzendt of ontvangt die niet overeenkomen met de domeinen die u hier opgeeft, worden gemarkeerd als niet-vertrouwd.",
- "windows10EndpointProtectionApplicationGuard": "Tijdens het gebruik van Microsoft Edge beveiligt Microsoft Defender Application Guard uw omgeving tegen sites die door uw organisatie niet als vertrouwd zijn gedefinieerd. Als gebruikers sites bezoeken die niet worden vermeld in uw geïsoleerde netwerkgrens, worden deze sites geopend in een virtuele browsersessie in Hyper-V. Vertrouwde sites worden gedefinieerd door een netwerkgrens, die in Apparaatconfiguratie kan worden geconfigureerd. Deze functie is alleen beschikbaar voor apparaten met 64-bits Windows 10 of hoger.",
- "windows10EndpointProtectionCredentialGuard": "Als u Credential Guard inschakelt, worden de volgende vereiste instellingen ingeschakeld:\r\n \r\n
\r\n
Beveiliging op basis van virtualisatie inschakelen: hiermee wordt beveiliging op basis van virtualisatie ingeschakeld bij de volgende keer opnieuw opstarten. Voor beveiliging op basis van virtualisatie wordt Windows Hypervisor gebruikt ter ondersteuning van beveiligingsservices.
\r\n \r\n
Beveiligd opstarten met directe geheugentoegang: hiermee wordt beveiliging op basis van virtualisatie ingeschakeld met beveiligd opstarten en directe geheugentoegang (DMA).
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Kies aanvullende apps die moeten worden gecontroleerd of kunnen worden vertrouwd door Microsoft Defender-toepassingsbeheer. Windows-onderdelen en alle apps uit Windows Store worden automatisch vertrouwd.
\r\n Toepassingen worden niet geblokkeerd wanneer ze in de modus Alleen controle worden uitgevoerd. De modus Alleen controle legt alle gebeurtenissen vast in de logboeken van de lokale client.\r\n ",
- "windows10GeneralPrivacyPerApp": "Voeg apps toe waarvoor een ander privacygedrag moet gelden dan wat u in 'Standaardprivacy' hebt gedefinieerd.",
- "windows10NetworkBoundaryNetworkBoundary": "De grens van het netwerk is de lijst met ondernemingsresources, zoals in de cloud gehoste domeinen en IP-adresbereiken voor computers op het bedrijfsnetwerk. Stel netwerkgrenzen in om beleid toe te passen ter bescherming van de gegevens die zich op deze locaties bevinden.",
- "windowsHealthMonitoring": "Het beleid voor statuscontrole van Windows configureren.",
- "windowsPhoneGeneralApplicationRestrictions": "Met Windows Phone kunt u voorkomen dat gebruikers apps installeren of starten die in de lijst met niet-toegestane apps staan of die niet voorkomen in de lijst met goedgekeurde apps. Alle beheerde apps moeten worden toegevoegd aan de goedgekeurde lijst."
- },
- "Inputs": {
- "accountDomain": "Accountdomein",
- "accountDomainHint": "bijvoorbeeld contosodomain",
- "accountDomainInfoBalloon": "Geef accountdomein van de gebruiker op.",
- "accountTypeInfoBalloon": "Het accounttype opgeven dat wordt geconfigureerd op basis van het verificatiemodel",
- "allowContactSetting": "Toestaan dat de gebruiker de instelling voor contactpersonen kan wijzigen",
- "allowContactSyncInfoBalloon": "Opgeven of de gebruiker de synchronisatie-instelling voor contactpersonen mag wijzigen",
- "allowUserChange": "Toestaan dat de gebruiker de instelling kan wijzigen",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Geef een pakketnaam op die vergelijkbaar is met com.microsoft.word",
- "androidUrlValidation": "Voer een geldige URL in die vergelijkbaar is met https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "Context voor app-installatie",
- "appUrlLabel": "Appstore-URL",
- "appleUrlValidation": "Voer een geldige URL in die vergelijkbaar is met https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Toepasselijk apparaattype",
- "assignmentActionLabel": "Modus",
- "authenticationMethodInfoBalloon": "De verificatiemethode voor de gebruiker opgeven",
- "authenticationMetod": "Verificatiemethode",
- "authenticationType": "Verificatietype",
- "authenticationTypeInfoBalloon": "Het verificatietype voor de gebruiker opgeven",
- "availableLicenseCount": "Beschikbare licenties",
- "basicAuth": "Basisverificatie",
- "biometricsInfoBalloon": "Biometrie, bijvoorbeeld TouchID of FaceID, kan worden vereist voor gebruikers om toegang te krijgen tot de app op hun apparaat. Indien nodig wordt biometrie gebruikt naast de verificatiemethode die is geselecteerd in dit profiel. Deze instelling moet niet worden ingeschakeld wanneer beveiligingsbeleid voor de Intune App is geïmplementeerd, omdat het beveiligingsbeleid voor de app toegangsvereisten omvat waaraan moet worden voldaan voordat toegang wordt verkregen tot beheerde gegevens. Als u beide inschakelt, leidt dit tot meerdere meldingen voor toegang tot Outlook Mobile. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt.",
- "bookNameLabel": "Boeknaam",
- "bundleDescriptionHint": "Voer een beschrijving voor de opgenomen apps in.",
- "calendar": "Agenda",
- "categoryLabel": "Categorie",
- "categoryNameLabel": "Standaardnaam",
- "certProfileType": "Type van het certificaatprofiel",
- "certificate": "Certificaat",
- "certificates": "Certificaten",
- "commandLineLabel": "Opdrachtregelargumenten",
- "commandLineSizeHint": "De maximale lengte van de tekst voor opdrachtregelargumenten is 1024 tekens",
- "configurationSettingsFormatLabel": "Indeling van de configuratie-instellingen",
- "configurationSettingsLabel": "Indeling voor instellingen",
- "contactSync": "Contactpersonen opslaan",
- "contactSyncInfoBalloon": "Door het opslaan van contactpersonen naar het systeemeigen adresboek van het mobiele apparaat kunnen nieuwe oproepen en sms-berichten worden gekoppeld met de bestaande Outlook-contactpersonen van de gebruiker. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt.",
- "contacts": "Contacten",
- "createdDateTime": "Gemaakt",
- "defaultCategoryHint": "Standaardcategorieën kunnen niet worden gewijzigd",
- "deploySMimeCertsFromIntune": "S/MIME-certificaten implementeren via Intune",
- "descriptionGenericLabel": "Beschrijving",
- "descriptionHint": "Een beschrijving invoeren...",
- "descriptionLabel": "Beschrijving",
- "descriptionSizeHint": "De beschrijving mag niet langer zijn dan 10.000 tekens",
- "developerLabel": "Ontwikkelaar",
- "developerSizeHint": "De maximale lengte van de naam van de ontwikkelaar is 256 tekens.",
- "disable": "Uitschakelen",
- "disabled": "Uitgeschakeld",
- "displayNameLabel": "Naam",
- "displayVersionHint": "De app-versie invoeren",
- "displayVersionLabel": "App-versie",
- "displayVersionLengthCheck": "De weergaveversie mag maximaal 130 tekens lang zijn",
- "eBookCategoryNameLabel": "Standaardnaam",
- "emailAccount": "Naam van e-mailaccount",
- "emailAccountHint": "bijvoorbeeld bedrijfs-e-mail",
- "emailAccountInfoBalloon": "De weergavenaam voor het e-mailaccount opgeven zoals deze wordt weergeven aan gebruikers op hun apparaten",
- "emailAddressAttribute": "E-mailadreskenmerk van Microsoft Entra-id",
- "emailAddressInfoBalloon": "Het e-mailadres opgeven dat moet worden gebruikt voor het verzenden en ontvangen van e-mail",
- "emailServer": "E-mailserver",
- "emailServerHint": "bijvoorbeeld mail.contoso.com",
- "emailServerInfoBalloon": "De hostnaam voor Exchange Server opgeven",
- "enable": "Inschakelen",
- "enableSMime": "S/MIME inschakelen",
- "enabled": "Inschakelen",
- "encryptAllEmails": "Alle e-mailberichten versleutelen",
- "encryptionCertificates": "Versleutelingscertificaten",
- "endUserNotifications": "Meldingen voor eindgebruikers",
- "enrollmentTypeLabel": "Type apparaatregistratie",
- "externalRecipients": "De MailTip Externe geadresseerden",
- "externalRecipientsInfoBalloon": "De MailTip Externe ontvangers wordt weergegeven als de afzender een externe ontvanger of een distributiegroep met externe ontvangers toevoegt. Deze MailTip informeert de afzender als een bericht dat de afzender heeft opgesteld, wordt verzonden naar ontvangers buiten de organisatie. De afzender kan dan de juiste beslissingen nemen over taalgebruik, toon en inhoud. Deze MailTip is alleen beschikbaar voor on-premises en Exchange Online-accounts die gebruikmaken van hybride moderne verificatie. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Aan gebruikt.",
- "focusedInbox": "Postvak IN met prioriteit",
- "focusedInboxInfoBalloon": "Met Postvak IN met prioriteit wordt het postvak IN gescheiden in twee tabbladen: Met prioriteit en Overige. Uw belangrijkste e-mails bevinden zich op het tabblad Met prioriteit. De rest staat binnen handbereik, maar buiten direct zicht, op het tabblad Overige. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Aan gebruikt.",
- "fullScreenEnabledLabel": "Volledig scherm",
- "gmailNineAmountOfEmail": "Aantal dagen e-mail voor synchronisatie",
- "gmailNineAuthenticationMethodInfoBalloon": "Selecteer hoe gebruikers moeten worden geverifieerd bij de e-mailserver. Gebruik certificaten om de meest veilige en naadloze ervaring aan eindgebruikers te bieden. Op certificaten gebaseerde verificatie is nog niet beschikbaar omdat SCEP- en PKCS-certificaatprofielen voor apparaten van de apparaat-eigenaar niet beschikbaar zijn. ",
- "gmailNineCertificateUPNInfoBalloon": "Het certificaat moet een User Principal Name (UPN) bevatten als alternatieve naam voor het onderwerp.",
- "gmailNineEmailAddressInfoBalloon": "Het kenmerk dat Intune krijgt van de Microsoft Entra-id om dynamisch het e-mailadres te genereren dat door het profiel wordt gebruikt, bijvoorbeeld MyName@contoso.com (UPN). Meer informatie over Microsoft Entra-kenmerken voor e-mailprofielen.",
- "gmailNineEmailServerInfoBalloon": "De Exchange-locatie (URL) van de e-mailserver waarmee de door u opgegeven app verbinding maakt om e-mailberichten op te halen.",
- "gmailNineEmailSynchronizeInfoBalloon": "Hiermee kunt u bepalen hoeveel e-mail met de client wordt gesynchroniseerd.",
- "gmailNineSSLInfoBalloon": "SSL inschakelen om alle communicatie met de e-mailserver te beveiligen.",
- "gmailNineUsernameInfoBalloon": "Het kenmerk dat Intune krijgt van de Microsoft Entra-id om dynamisch de gebruikersnaam te genereren die door het profiel wordt gebruikt, bijvoorbeeld MyName@contoso.com (UPN) of MyName (gebruikersnaam). Meer informatie over Microsoft Entra-kenmerken voor e-mailprofielen.",
- "ignoreManifestScope": "Manifestbereik negeren",
- "ignoreVersionDetection": "App-versie negeren",
- "informationUrlLabel": "Informatie-URL",
- "informationUrlSizeHint": "De maximale lengte van de informatie-URL is 1024 tekens",
- "installAsManaged": "Installeren als beheerd",
- "installationSourceLabel": "App-type",
- "installerTypeInfoBalloon": "Het installatietype van het toepassingspakket.",
- "installerTypeLabel": "Type installatieprogramma",
- "isFeatured": "Deze weergeven als aanbevolen app in de bedrijfsportal",
- "isMAMEnabledToggleLabel": "Ja",
- "lastModifiedDateTime": "Tijd laatst bijgewerkt",
- "ldapUrl": "LDAP-URL",
- "licensingType": "Ondersteunt apparaatcontexttoewijzing",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimumversie van het besturingssysteem",
- "modernAuth": "Moderne verificatie",
- "nameHint": "Een naam invoeren",
- "nameLabel": "Naam",
- "nameSizeHint": "De maximale lengte van de naam is 512 tekens.",
- "notConfigured": "Niet geconfigureerd",
- "notesLabel": "Opmerkingen",
- "notesSizeHint": "De maximale lengte van de tekst van de notities is 1024 tekens.",
- "notificationType": "Meldingstype",
- "oneDay": "Eén dag",
- "oneMonth": "Een maand",
- "oneWeek": "Eén week",
- "outlookSMimeSettings": "S/MIME-instellingen voor Outlook",
- "ownerLabel": "Eigenaar",
- "ownerSizeHint": "De maximale lengte van de naam van de eigenaar is 256 tekens.",
- "packageIdLabel": "Pakket-id",
- "packageNameLabel": "Pakketnaam",
- "pivCredentialNotConfigured": "U hebt geen verlener van afgeleide referenties geselecteerd voor de tenant. Configureer een verlener om dit beleid op apparaten toe te passen.",
- "platformLabel": "Platform",
- "policyDescriptionLabel": "Beschrijving",
- "policyNameLabel": "Naam",
- "preComposedIconEnabled": "Vooraf samengesteld",
- "primarySMTPAddress": "Primair SMTP-adres",
- "privacyUrlLabel": "Privacy-URL",
- "publisherHint": "Voer de naam van een uitgever in",
- "publisherLabel": "Uitgever",
- "publisherSizeHint": "De naam van de uitgever moet tussen de 2 en 1024 tekens lang zijn (inclusief)",
- "require": "Vereisen",
- "requireBiometrics": "Biometrie vereisen toegang tot de app",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "Er is minstens één bereiktag vereist",
- "searchAppLabel": "App selecteren",
- "searchAppLinkText": "Zoeken in de App Store",
- "searchWinGetPublicRepositoryLinkText": "Opslagplaats van de community van Windows-pakketbeheerder doorzoeken",
- "searchWinGetStoreRepositoryLinkText": "Zoeken in de Microsoft Store-app (nieuw)",
- "selectAAD": "Een Microsoft Entra-kenmerk selecteren",
- "selectAppFileLabel": "Bestand selecteren",
- "selectAppFileLinkText": "App-pakketbestand selecteren",
- "selectAppFileToUpdateLabel": "Een bestand selecteren dat moet worden bijgewerkt",
- "selectAuthMethod": "Een verificatiemethode selecteren",
- "selectAuthType": "Een verificatietype selecteren",
- "selectCatalogAppLabel": "App selecteren",
- "selectCatalogAppLinkText": "Zoeken in de Enterprise App-catalogus",
- "selectCertificate": "Selecteer een certificaat",
- "signAllEmails": "Alle e-mailberichten ondertekenen",
- "signingCertificates": "Handtekeningcertificaten",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Beschrijving van suite",
- "suiteNameLabel": "Naam van suite",
- "targetApplicationBundleIdentifier": "Bundel-id van doeltoepassing",
- "targetedPlatformsLabel": "Gericht platform",
- "tasks": "Taken",
- "threeDays": "Drie dagen",
- "totalLicenseCount": "Totaal aantal licenties",
- "twoWeeks": "Twee weken",
- "unifiedAssignmentsLabel": "Toewijzen aan:",
- "unlimited": "Onbeperkt",
- "urlHint": "Voer een geldige URL in",
- "useManagedBrowserHint": "Alleen Android en iOS. Meer informatie.",
- "useManagedBrowserLabel": "Een beheerde browser vereisen om deze koppeling te openen",
- "userPrinicipalName": "User principal name",
- "username": "Gebruikersnaam",
- "usernameAttribute": "Gebruikersnaamkenmerk van Microsoft Entra-id",
- "usernameAttributreInfoBalloon": "De user principal name opgeven van het e-mailprofiel dat wordt gebruikt voor verificatie van het account",
- "usernamePassword": "Gebruikersnaam en wachtwoord",
- "webAppUrlHint": "Voer een geldige URL in die begint met http:// of https://",
- "webAppUrlLabel": "App-URL",
- "webAppUrlSizeHint": "De maximale lengte van de app-URL is 1024 tekens.",
- "windowsUrlValidation": "Voer een geldige URL in die vergelijkbaar is met https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "XML-gegevens zijn ingevoerd",
- "xmlFormatInvalid": "De indeling van het XML-beleid is ongeldig.",
- "xmlTooLarge": "De invoergrootte moet kleiner zijn dan 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Kan {0} niet verwijderen",
- "failureCa": "Kan {0} niet verwijderen omdat ernaar wordt verwezen door CA-beleid",
- "modifying": "{0} verwijderen",
- "success": "{0} is verwijderd"
- },
- "Notify": {
- "failure": "Kan {0} niet bijwerken",
- "modifying": "{0} wijzigen",
- "success": "{0} is bijgewerkt"
- },
- "menuLabel": "Verificatiecontext"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Meer informatie over het vereisen van verificatiemethoden die zijn voldaan door federatieproviders.",
- "certificate": "Certificaatverificatie",
- "infoBubble": "Geef een vereiste verificatiemethode op die moet worden voldaan door de federatieprovider, bijvoorbeeld ADFS.",
- "multifactor": "Meervoudige verificatie",
- "require": "Federatieve verificatiemethode vereisen (preview)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Een beleid voor permanente browsersessies werkt alleen correct als de optie Alle cloud-apps is geselecteerd. Werk uw selectie cloud-apps bij."
- },
- "Option": {
- "always": "Altijd permanent",
- "help": "In een permanente browsersessie kunnen gebruikers aangemeld blijven na het sluiten en opnieuw openen van hun browservenster. \n
\n
Deze instelling werkt correct als de optie Alle cloud-apps is geselecteerd
\n
Dit heeft geen invloed op de levensduur van tokens of de instelling van aanmeldingsfrequentie.
\n
Hiermee wordt het beleid Optie om aangemeld te blijven weergeven in de aangepaste huisstijl genegeerd.
\n
De optie Nooit permanent overschrijft eventuele permanente claims van eenmalige aanmelding die zijn doorgegeven vanuit federatieve verificatieservices.
\n
Nooit permanent voorkomt eenmalige aanmelding op mobiele apparaten in en tussen toepassingen en de mobiele browser van de gebruiker.
\n",
- "label": "Permanente browsersessie",
- "never": "Nooit permanent"
- },
- "Warning": {
- "allApps": "Permanente browsersessies werken alleen correct als de optie Alle cloud-apps is geselecteerd. Werk uw selectie cloud-apps bij. Klik hier voor meer informatie."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Uren of dagen",
- "value": "Frequentie"
- },
- "Option": {
- "Day": {
- "plural": "{0} dagen",
- "singular": "1 dag"
- },
- "Hour": {
- "plural": "{0} uur",
- "singular": "1 uur"
- },
- "daysOption": "Dagen",
- "everytime": "Elke keer",
- "help": "De tijdsperiode voordat een gebruiker wordt gevraagd om zich opnieuw aan te melden als hij/zij probeert een resource te openen. De standaardinstelling is een lopende telling van 90 dagen. Dit houdt in dat gebruikers wordt gevraagd zich opnieuw te verifiëren wanneer zij voor het eerst weer proberen toegang tot een resource te krijgen nadat zij 90 dagen of langer niet actief zijn geweest op hun computer.",
- "hoursOption": "Uren",
- "label": "Aanmeldingsfrequentie",
- "placeholder": "Eenheden selecteren"
- }
- },
- "mainOption": "Levensduur van sessie wijzigen",
- "mainOptionHelp": "Instellen hoe vaak gebruikers vragen worden gesteld en of browsersessies permanent zijn. Toepassingen die geen moderne verificatieprotocollen ondersteunen, voldoen mogelijk niet aan dit beleid. Neem in dergelijke gevallen contact op met de toepassingsontwikkelaar."
- },
- "SingleSelectorActive": {
- "failed": "Kan deze gegevens niet laden.",
- "reattempt": "Gegevens laden. Nieuwe poging {0} van {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Directory-rollen kiezen"
- },
- "Excluded": {
- "gridAria": "Lijst met uitgesloten gebruikers"
- },
- "Included": {
- "gridAria": "Lijst met opgenomen gebruikers"
- },
- "Validation": {
- "customRoleIncluded": "Directory-rollen bevat ten minste één aangepaste rol",
- "customRoleSelected": "Er is ten minste één aangepaste rol geselecteerd",
- "failed": "U moet {0} configureren",
- "roles": "U moet ten minste één rol selecteren",
- "usersGroups": "U moet ten minste één gebruiker of groep selecteren"
- },
- "learnMore": "Beheer de toegang op basis van op wie het beleid van toepassing is, zoals gebruikers en groepen, workloadidentiteiten, directoryrollen of externe gasten."
- },
- "advancedTabText": "Geavanceerd",
- "allCloudAppsErrorBox": "Alle cloud-apps moet worden geselecteerd wanneer de toekenning Wachtwoordwijziging vereisen is geselecteerd",
- "allCloudAppsReauth": "\"Alle cloud-apps\" moet worden geselecteerd wanneer sessiecontrole \"Aanmeldingsfrequentie elke keer\" en toestand \"aanmeldingsrisico\" zijn geselecteerd",
- "allCloudOrSpecificApps": "Voor het sessiebeheer 'aanmeldingsfrequentie elke keer' moeten 'alle cloud-apps' of specifiek ondersteunde apps worden geselecteerd",
- "allDayCheckboxLabel": "Hele dag",
- "allDevicePlatforms": "Elk apparaat",
- "allGuestUserInfoContent": "Omvat Microsoft Entra B2B-gasten, maar geen SharePoint B2B-gasten",
- "allGuestUserLabel": "Alle gastgebruikers en externe gebruikers",
- "allRiskLevelsOption": "Alle risiconiveaus",
- "allTrustedLocationLabel": "Alle vertrouwde locaties",
- "allUserGroupSetSelectorLabel": "Alle geselecteerde gebruikers en groepen",
- "allUsersReauth": "Voor het sessiebesturingselement 'aanmeldingsfrequentie elke keer' moet 'Alle gebruikers' zijn geselecteerd",
- "allUsersString": "Alle gebruikers",
- "and": "{0} EN {1} ",
- "andWithGrouping": "({0}) EN {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Een willekeurige cloud-app",
- "appContextOptionInfoContent": "Aangevraagde verificatietag",
- "appContextOptionLabel": "Aangevraagde verificatietag (preview)",
- "appContextUriPlaceholder": "Voorbeeld: uri:contoso.com:level3",
- "appEnforceInfoBubble": "Er zijn voor door apps gehandhaafde beperkingen mogelijk aanvullende beheerdersconfiguraties vereist in de cloud-apps. De beperkingen zijn alleen van toepassing op nieuwe sessies.",
- "appNotSetSeletorLabel": "0 cloud-apps geselecteerd",
- "appReauthNotSupported": "Deze app biedt geen ondersteuning voor het sessiebeheer 'elke keer aanmelden'.",
- "applyConditionClientAppInfoBalloonContent": "Client-apps configureren om het beleid toe te passen op specifieke client-apps",
- "applyConditionDevicePlatformInfoBalloonContent": "Apparaatplatformen configureren om het beleid toe te passen op specifieke platformen",
- "applyConditionDeviceStateInfoBalloonContent": "Apparaatstatus configureren om het beleid toe te passen op specifieke apparaatstatussen",
- "applyConditionLocationInfoBalloonContent": "Locaties configureren om het beleid toe te passen op vertrouwde/niet-vertrouwde locaties",
- "applyConditionSigninRiskInfoBalloonContent": "Aanmeldingsrisico configureren om het beleid toe te passen op de geselecteerde risiconiveaus",
- "applyConditionUserRiskInfoBalloonContent": "Gebruikersrisico configureren om het beleid toe te passen op de geselecteerde risiconiveaus",
- "applyConditonLabel": "Configureren",
- "ariaLabelPolicyDisabled": "Beleid is uitgeschakeld",
- "ariaLabelPolicyEnabled": "Beleid is ingeschakeld",
- "ariaLabelPolicyReportOnly": "Het beleid bevindt zich in de modus voor alleen rapporteren",
- "blockAccess": "Toegang blokkeren",
- "builtInDirectoryRoleLabel": "Ingebouwde directory-rollen",
- "casCustomControlInfo": "Aangepaste beleidsregels moeten worden geconfigureerd in Cloud App Security-portal. Dit besturingselement werkt direct voor aanbevolen apps en kan zelfstandig worden uitgevoerd voor elke app. Klik hier voor meer informatie over beide scenario's.",
- "casInfoBubble": "Dit besturingselement is geschikt voor verschillende cloud-apps.",
- "casPreconfiguredControlInfo": "Dit besturingselement werkt direct voor aanbevolen apps en kan zelfstandig worden uitgevoerd voor elke app. Klik hier voor meer informatie over beide scenario's.",
- "cert64DownloadCol": "base64-certificaat downloaden",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Certificaat downloaden",
- "certDurationCol": "Vervaldatum",
- "certDurationStartCol": "Geldig van",
- "certName": "VpnCert",
- "certainApps": "Alleen bepaalde apps worden ondersteund voor 'Aanmeldingsfrequentie elke keer' als toekenningen niet zijn geselecteerd voor 'Meervoudige verificatie vereisen' en 'Wachtwoordwijziging vereisen'",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Toepassingen kiezen",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Gekozen toepassingen",
- "chooseApplicationsEmpty": "Geen toepassingen",
- "chooseApplicationsNone": "Geen",
- "chooseApplicationsNoneFound": "Kan {0} niet vinden. Probeer een andere naam of een andere id.",
- "chooseApplicationsPlural": "{0} en nog {1}",
- "chooseApplicationsReAuthEverytimeInfo": "Bent u op zoek naar uw app? Sommige toepassingen kunnen niet worden gebruikt met sessiebeheer 'Telkens opnieuw verificatie vereisen'",
- "chooseApplicationsRemove": "Verwijderen",
- "chooseApplicationsReturnedPlural": "{0} toepassingen gevonden",
- "chooseApplicationsReturnedSingular": "1 toepassing gevonden",
- "chooseApplicationsSearchBalloon": "Zoek naar een toepassing door de naam of de id in te voeren.",
- "chooseApplicationsSearchHint": "Toepassingen zoeken...",
- "chooseApplicationsSearchLabel": "Toepassingen",
- "chooseApplicationsSearching": "Zoeken...",
- "chooseApplicationsSelect": "Selecteren",
- "chooseApplicationsSelected": "Geselecteerd",
- "chooseApplicationsSingular": "{0} en nog 1",
- "chooseApplicationsTooMany": "Meer resultaten dan kunnen worden weergegeven. Filter met behulp van het zoekvak.",
- "chooseLocationCorpnetItem": "Bedrijfsnetwerk",
- "chooseLocationSelectedLocationsLabel": "Geselecteerde locaties",
- "chooseLocationTrustedIpsItem": "Vertrouwde IP-adressen voor meervoudige verificatie",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Locaties kiezen",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Gekozen locaties",
- "chooseLocationsEmpty": "Geen locaties",
- "chooseLocationsExcludedSelectorTitle": "Selecteren",
- "chooseLocationsIncludedSelectorTitle": "Selecteren",
- "chooseLocationsNone": "Geen",
- "chooseLocationsNoneFound": "Kan {0} niet vinden. Probeer een andere naam of een andere id.",
- "chooseLocationsPlural": "{0} en nog {1}",
- "chooseLocationsRemove": "Verwijderen",
- "chooseLocationsReturnedPlural": "{0} locaties gevonden",
- "chooseLocationsReturnedSingular": "1 locatie gevonden",
- "chooseLocationsSearchBalloon": "Zoek naar een locatie door de naam in te voeren.",
- "chooseLocationsSearchHint": "Locaties zoeken...",
- "chooseLocationsSearchLabel": "Locaties",
- "chooseLocationsSearching": "Zoeken...",
- "chooseLocationsSelect": "Selecteren",
- "chooseLocationsSelected": "geselecteerd",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Selecteren",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Selecteren",
- "chooseLocationsSingular": "{0} en nog 1",
- "chooseLocationsTooMany": "Meer resultaten dan kunnen worden weergegeven. Filter met behulp van het zoekvak.",
- "claimProviderAddCommandText": "Nieuw aangepast besturingselement",
- "claimProviderAddNewBladeTitle": "Nieuw aangepast besturingselement",
- "claimProviderDeleteCommand": "Verwijderen",
- "claimProviderDeleteDescription": "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt.",
- "claimProviderDeleteTitle": "Weet u het zeker?",
- "claimProviderEditInfoText": "Geef de JSON voor aangepaste besturingselementen op die is verstrekt door uw claimproviders.",
- "claimProviderNotificationCreateDescription": "Aangepast besturingselement {0} maken",
- "claimProviderNotificationCreateFailedDescription": "Kan het aangepaste besturingselement {0} niet maken. Probeer het later opnieuw.",
- "claimProviderNotificationCreateFailedTitle": "Kan het aangepaste besturingselement niet maken",
- "claimProviderNotificationCreateSuccessDescription": "Het aangepaste besturingselement {0} is gemaakt",
- "claimProviderNotificationCreateSuccessTitle": "{0} is gemaakt",
- "claimProviderNotificationCreateTitle": "{0} maken...",
- "claimProviderNotificationDeleteDescription": "Het aangepaste besturingselement {0} verwijderen",
- "claimProviderNotificationDeleteFailedDescription": "Kan het aangepaste besturingselement {0} niet verwijderen. Probeer het later opnieuw.",
- "claimProviderNotificationDeleteFailedTitle": "Kan het aangepaste besturingselement niet verwijderen",
- "claimProviderNotificationDeleteSuccessDescription": "Het aangepaste besturingselement {0} is verwijderd",
- "claimProviderNotificationDeleteSuccessTitle": "{0} is verwijderd",
- "claimProviderNotificationDeleteTitle": "{0} verwijderen...",
- "claimProviderNotificationUpdateDescription": "Het aangepaste besturingselement {0} bijwerken",
- "claimProviderNotificationUpdateFailedDescription": "Kan het aangepaste besturingselement {0} niet bijwerken. Probeer het later opnieuw.",
- "claimProviderNotificationUpdateFailedTitle": "Kan het aangepaste besturingselement niet bijwerken",
- "claimProviderNotificationUpdateSuccessDescription": "Het aangepaste besturingselement {0} is bijgewerkt",
- "claimProviderNotificationUpdateSuccessTitle": "{0} is bijgewerkt",
- "claimProviderNotificationUpdateTitle": "{0} bijwerken...",
- "claimProviderValidationAppIdInvalid": "De waarde AppId is ongeldig. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationClientIdMissing": "In de gegevens ontbreekt de waarde ClientId. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationControlClaimsRequestedMissing": "In het besturingselement ontbreekt de waarde ClaimsRequested. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "In het item ClaimsRequested ontbreekt de waarde Type. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationControlIdAlreadyExists": "De waarde Control Id bestaat al. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationControlIdMissing": "In het besturingselement ontbreekt de waarde Id. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "De waarde Id van het besturingselement kan niet worden verwijderd omdat ernaar wordt verwezen in een bestaand beleid. Verwijder deze eerst uit het beleid.",
- "claimProviderValidationControlIdTooManyControls": "De eigenschap Control bevat te veel besturingselementen. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationControlIdValueReserved": "De waarde Control Id is een gereserveerd sleutelwoord. Gebruik een andere id.",
- "claimProviderValidationControlNameAlreadyExists": "De waarde Control Name bestaat al. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationControlNameMissing": "In het besturingselement ontbreekt de waarde Name. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationControlsMissing": "In de gegevens ontbreekt de waarde Controls. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationDiscoveryUrlMissing": "In de gegevens ontbreekt de waarde DiscoveryUrl. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationInvalid": "De verstrekte gegevens zijn ongeldig. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationInvalidJsonDefinition": "Kan het aangepaste besturingselement niet opslaan. Controleer de JSON-tekst en probeer het opnieuw.",
- "claimProviderValidationNameAlreadyExists": "De waarde Name bestaat al. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationNameMissing": "In de gegevens ontbreekt de waarde Name. Controleer dit en probeer het opnieuw.",
- "claimProviderValidationUnknown": "Er is een onbekende fout opgetreden tijdens het valideren van de verstrekte gegevens. Controleer dit en probeer het opnieuw.",
- "claimProvidersNone": "Geen aangepaste besturingselementen",
- "claimProvidersSearchPlaceholder": "Zoekbesturingselementen.",
- "classicPoilcyFilterTitle": "Weergeven",
- "classicPolicyAllPlatforms": "Alle platformen",
- "classicPolicyClientAppBrowserAndNative": "Browser, mobiele apps en bureaubladclients",
- "classicPolicyCloudAppTitle": "Cloudtoepassing",
- "classicPolicyControlAllow": "Toestaan",
- "classicPolicyControlBlock": "Blok",
- "classicPolicyControlBlockWhenNotAtWork": "Toegang blokkeren bij inactiviteit",
- "classicPolicyControlRequireCompliantDevice": "Compatibel apparaat vereisen",
- "classicPolicyControlRequireDomainJoinedDevice": "Apparaat dat is toegevoegd aan het domein vereisen",
- "classicPolicyControlRequireMfa": "Meervoudige verificatie vereisen",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Meervoudige verificatie vereisen bij inactiviteit",
- "classicPolicyDeleteCommand": "Verwijderen",
- "classicPolicyDeleteFailTitle": "Kan klassiek beleid niet verwijderen",
- "classicPolicyDeleteInProgressTitle": "Klassiek beleid verwijderen",
- "classicPolicyDeleteSuccessTitle": "Klassiek beleid verwijderd",
- "classicPolicyDetailBladeTitle": "Details",
- "classicPolicyDisableCommand": "Uitschakelen",
- "classicPolicyDisableConfirmation": "Weet u zeker dat u {0} wilt uitschakelen? Deze bewerking kan niet ongedaan worden gemaakt.",
- "classicPolicyDisableFailDescription": "Kan {0} niet uitschakelen",
- "classicPolicyDisableFailTitle": "Kan klassiek beleid niet uitschakelen",
- "classicPolicyDisableInProgressDescription": "{0} uitschakelen",
- "classicPolicyDisableInProgressTitle": "Klassiek beleid uitschakelen",
- "classicPolicyDisableSuccessDescription": "{0} is uitgeschakeld",
- "classicPolicyDisableSuccessTitle": "Klassiek beleid is uitgeschakeld",
- "classicPolicyEasSupportedPlatforms": "Ondersteunde platformen voor Exchange ActiveSync",
- "classicPolicyEasUnsupportedPlatforms": "Niet-ondersteunde platformen voor Exchange ActiveSync",
- "classicPolicyExcludedPlatformsTitle": "Uitgesloten apparaatplatformen",
- "classicPolicyFilterAll": "Alle beleidsregels",
- "classicPolicyFilterDisabled": "Uitgeschakelde beleidsregels",
- "classicPolicyFilterEnabled": "Ingeschakelde beleidsregels",
- "classicPolicyIncludeExcludeMembersDescription": "Door groepen uit te sluiten kunt u een gefaseerde migratie van beleidsregels uitvoeren.",
- "classicPolicyIncludeExcludeMembersTitle": "Groepen opnemen/uitsluiten",
- "classicPolicyIncludedPlatformsTitle": "Opgenomen apparaatplatformen",
- "classicPolicyManualMigrationMessage": "Dit beleid moet handmatig worden gemigreerd.",
- "classicPolicyMigrateCommand": "Migreren",
- "classicPolicyMigrateConfirmation": "Weet u zeker dat u {0} wilt migreren? Dit beleid kan slechts eenmaal worden gemigreerd.",
- "classicPolicyMigrateFailDescription": "Kan {0} niet migreren",
- "classicPolicyMigrateFailTitle": "Kan klassiek beleid niet migreren",
- "classicPolicyMigrateInProgressDescription": "{0} migreren",
- "classicPolicyMigrateInProgressTitle": "Klassiek beleid migreren",
- "classicPolicyMigrateRecommendText": "Aanbeveling: migreren naar het nieuwe Azure Portal-beleid.",
- "classicPolicyMigrateSuccessTitle": "Klassiek beleid gemigreerd",
- "classicPolicyMigratedSuccessDescription": "Dit klassieke beleid kan nu worden beheerd onder Beleid.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "Dit klassieke beleid is gemigreerd als nieuw {0}-beleid. Nieuw beleid kan worden beheerd onder Beleid.",
- "classicPolicyNoEditPermissionMsg": "U bent niet gemachtigd om dit beleid te bewerken. Alleen globale beheerders en beveiligingsbeheerders mogen het beleid bewerken. Klik hier voor meer informatie.",
- "classicPolicySaveFailDescription": "Kan {0} niet opslaan",
- "classicPolicySaveFailTitle": "Kan klassiek beleid niet opslaan",
- "classicPolicySaveInProgressDescription": "{0} opslaan",
- "classicPolicySaveInProgressTitle": "Klassiek beleid opslaan",
- "classicPolicySaveSuccessDescription": "{0} is opgeslagen",
- "classicPolicySaveSuccessTitle": "Klassiek beleid opgeslagen",
- "clientAppBladeLegacyInfoBanner": "Verificatie op basis van verouderde gegevens wordt momenteel niet ondersteund",
- "clientAppBladeLegacyUpsellBanner": "Niet-ondersteunde client-apps blokkeren (preview)",
- "clientAppBladeTitle": "Client-apps",
- "clientAppDescription": "De client-apps selecteren waarop dit beleid van toepassing is",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync biedt momenteel geen ondersteuning voor alle andere voorwaarden",
- "clientAppLearnMore": "Beheer gebruikerstoegang om u op specifieke clienttoepassingen te richten zonder moderne verificatie te gebruiken.",
- "clientAppLegacyHeader": "Clients met verouderde verificatie",
- "clientAppMobileDesktop": "Mobiele apps en bureaubladclients",
- "clientAppModernHeader": "Moderne verificatieclients",
- "clientAppOnlySupportedPlatforms": "Het beleid toepassen op ondersteunde platformen",
- "clientAppSelectSpecificClientApps": "Client-apps selecteren",
- "clientAppWebBrowser": "Browser",
- "clientAppsSelectedLabel": "{0} opgenomen",
- "clientTypeBrowser": "Browser",
- "clientTypeEas": "Exchange ActiveSync-clients",
- "clientTypeEasInfo": "Exchange ActiveSync-clients die alleen verouderde verificatie gebruiken.",
- "clientTypeModernAuth": "Moderne verificatieclients",
- "clientTypeOtherClients": "Andere clients",
- "clientTypeOtherClientsInfo": "Dit omvat de oudere Office-clients en andere e-mailprotocollen (POP, IMAP, SMTP enzovoort). [Meer informatie][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "{0} cloud-apps die is/zijn geconfigureerd in dit beleid, is/zijn uit de map verwijderd, maar dit heeft geen invloed op de andere apps in het beleid. De volgende keer dat u de toepassingssectie van het beleid bijwerkt, worden de verwijderde apps automatisch verwijderd.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Alle Microsoft-apps",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Cloud-, desktop- en mobiele apps van Microsoft toestaan (preview)",
- "cloudappsSelectionBladeAllCloudapps": "Alle cloud-apps",
- "cloudappsSelectionBladeExcludeDescription": "De cloud-apps selecteren die van het beleid moeten worden uitgesloten",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Uitgesloten cloud-apps selecteren",
- "cloudappsSelectionBladeIncludeDescription": "De cloud-apps selecteren waarop dit beleid van toepassing is",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Selecteren",
- "cloudappsSelectionBladeSelectedCloudapps": "Apps selecteren",
- "cloudappsSelectorInfoBallonText": "Services waarmee de gebruiker werkzaamheden uitvoert, bijvoorbeeld Salesforce",
- "cloudappsSelectorPluralExcluded": "{0} apps uitgesloten",
- "cloudappsSelectorPluralIncluded": "{0} apps inbegrepen",
- "cloudappsSelectorSingularExcluded": "1 app uitgesloten",
- "cloudappsSelectorSingularIncluded": "1 app inbegrepen",
- "cloudappsSelectorUserPlural": "{0} apps",
- "cloudappsSelectorUserSingular": "1 app",
- "conditionLabelMulti": "{0} voorwaarden geselecteerd",
- "conditionLabelOne": "1 voorwaarde geselecteerd",
- "conditionalAccessBladeTitle": "Voorwaardelijke toegang",
- "conditionsNotSelectedLabel": "Niet geconfigureerd",
- "conditionsReqMfaReauthSet": "Sommige opties zijn niet beschikbaar vanwege de momenteel geselecteerde toekenning 'Meervoudige verificatie vereisen' en sessiecontrole 'Aanmeldingsfrequentie elke keer'",
- "conditionsReqPwSet": "Een aantal opties is niet beschikbaar omdat de toekenning Wachtwoordwijziging vereisen momenteel is geselecteerd",
- "configureCasText": "Cloud App Security configureren",
- "configureCustomControlsText": "Aangepast beleid configureren",
- "controlLabelMulti": "{0} besturingselementen geselecteerd",
- "controlLabelOne": "1 besturingselement geselecteerd",
- "controlValidatorText": "Selecteer minstens één besturingselement",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Meer informatie over het vereisen van compatibele apparaten.",
- "controlsDeviceComplianceInfoBubble": "Het apparaat moet compatibel zijn met Intune. Als het apparaat niet compatibel is, wordt de gebruiker gevraagd de nalevingsprocedure uit te voeren.",
- "controlsDomainJoinedAriaLabel": "Meer informatie over het vereisen van apparaten die aan hybride Microsoft Entra zijn gekoppeld.",
- "controlsDomainJoinedInfoBubble": "Apparaten moeten zijn samengevoegd met hybride Microsoft Entra.",
- "controlsMamAriaLabel": "Meer informatie over het vereisen van goedgekeurde clienttoepassingen.",
- "controlsMamInfoBubble": "Op het apparaat moeten deze goedgekeurde clienttoepassingen worden gebruikt.",
- "controlsMfaInfoBubble": "De gebruiker moet voldoen aan aanvullende beveiligingsvereisten, bijvoorbeeld via een telefoongesprek of sms-bericht",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Meer informatie over het vereisen van door beleid beveiligde apps.",
- "controlsRequireCompliantAppInfoBubble": "Apparaat moet met beleid beveiligde apps gebruiken.",
- "controlsRequirePasswordResetAriaLabel": "Meer informatie over het vereisen van een wachtwoordwijziging.",
- "controlsRequirePasswordResetInfoBubble": "Een wachtwoordwijziging vereisen om het gebruikersrisico te verlagen. Voor deze optie is bovendien meervoudige verificatie vereist. Andere besturingselementen kunnen niet worden gebruikt.",
- "countriesRadiobuttonInfoBalloonContent": "Het land/de regio waaruit een aanmelding afkomstig is, wordt bepaald door het IP-adres van de gebruiker.",
- "createNewVpnCert": "Nieuw certificaat",
- "createdTimeLabel": "Aanmaaktijd",
- "customRoleLabel": "Aangepaste rollen (niet ondersteund)",
- "dateRangeTypeLabel": "Datumbereik",
- "daysOfWeekPlaceholderText": "Dagen van de week filteren",
- "daysOfWeekTypeLabel": "Dagen van de week",
- "deletePolicyNoLicenseText": "U kunt dit beleid nu verwijderen. Als het is verwijderd, kun u het niet opnieuw maken totdat u beschikt over de vereiste licenties.",
- "descriptionContentForControlsAndOr": "Voor meerdere besturingselementen",
- "devicePlatform": "Apparaatplatform",
- "devicePlatformConditionHelpDescription": "Beleid toepassen op de geselecteerde apparaatplatformen.\n[Meer informatie][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} opgenomen",
- "devicePlatformIncludeExclude": "{0} en {1} uitgesloten",
- "devicePlatformNoSelectionError": "Voor het selecteren van apparaatplatformen moet één subitem worden geselecteerd.",
- "devicePlatformsNone": "Geen",
- "deviceSelectionBladeExcludeDescription": "De platformen selecteren die van het beleid moeten worden uitgesloten",
- "deviceSelectionBladeIncludeDescription": "De apparaatplatformen selecteren die in dit beleid moeten worden opgenomen",
- "deviceStateAll": "Status Alle apparaten",
- "deviceStateCompliant": "Gemarkeerd als compatibel apparaat",
- "deviceStateCompliantInfoContent": "Apparaten die compatibel met Intune zijn, worden uitgesloten van de evaluatie van dit beleid. Als het beleid dus bijvoorbeeld de toegang blokkeert, worden alle apparaten die compatibel zijn met Intune geblokkeerd.",
- "deviceStateConditionConfigureInfoContent": "Beleid configureren op basis van de apparaatstatus",
- "deviceStateConditionSelectorInfoContent": "Of het apparaat van waaruit de gebruiker zich aanmeldt, 'met hybride Microsoft Entra toegevoegd' of 'gemarkeerd als conform' is.\n Dit is afgeschaft. Gebruik in plaats daarvan {1}.",
- "deviceStateConditionSelectorLabel": "Apparaatstatus (afgeschaft)",
- "deviceStateDomainJoined": "Apparaat is met hybride Microsoft Entra toegevoegd",
- "deviceStateDomainJoinedInfoContent": "Apparaten die met hybride Microsoft Entra zijn samengevoegd, worden uitgesloten van de evaluatie van dit beleid. Als het beleid dus bijvoorbeeld de toegang blokkeert, worden alle apparaten geblokkeerd, behalve apparaten die met hybride Microsoft Entra zijn samengevoegd.",
- "deviceStateDomainJoinedInfoLinkText": "Meer informatie.",
- "deviceStateExcludeDescription": "De apparaatstatusvoorwaarde selecteren die wordt gebruikt om apparaten van het beleid uit te sluiten.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} en {1} uitsluiten",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} en {1}, {2} uitsluiten",
- "directoryRoleInfoContent": "Beleid toewijzen aan ingebouwde directory-rollen.",
- "directoryRolesLabel": "Directory-rollen",
- "discardbutton": "Verwijderen",
- "downloadDefaultFileName": "IP-bereiken",
- "downloadExampleFileName": "Voorbeeld",
- "downloadExampleHeader": "Dit is een voorbeeldbestand waarin u kunt zien wat voor soort gegevens kunnen worden geaccepteerd. Regels die beginnen met # worden genegeerd.",
- "duplicate": "Dupliceren",
- "duplicatePolicyName": "{0} KOPIËREN",
- "endDatePickerLabel": "Eindigt op",
- "endTimePickerLabel": "Eindtijd",
- "enterCountryText": "IP-adres en land/regio worden als paar geëvalueerd. Selecteer het land.",
- "enterIpText": "IP-adres en land/regio worden als paar geëvalueerd. Voer het IP-adres in.",
- "enterUserText": "Er is geen gebruiker geselecteerd. Selecteer een gebruiker.",
- "evaluationResult": "Resultaat van de evaluatie",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Alleen Exchange ActiveSync met ondersteunde platformen",
- "excludeAllTrustedLocationSelectorText": "alle vertrouwde locaties",
- "featureRequiresP2": "Voor deze functie is een Microsoft Entra ID P2-licentie vereist.",
- "friday": "vrijdag",
- "grantControls": "Besturingselementen toekennen",
- "gridNetworkTrusted": "Vertrouwd",
- "gridPolicyCreatedDateTime": "Aanmaakdatum",
- "gridPolicyEnabled": "Ingeschakeld",
- "gridPolicyModifiedDateTime": "Gewijzigd op",
- "gridPolicyName": "Beleidsnaam",
- "gridPolicyState": "Status",
- "groupSelectionBladeExcludeDescription": "De groepen selecteren die van het beleid zijn uitgesloten",
- "groupSelectionBladeExcludedSelectorTitle": "Uitgesloten groepen selecteren",
- "groupSelectionBladeSelect": "Groepen selecteren",
- "groupSelectorInfoBallonText": "Groepen in de map waarop het beleid van toepassing is, bijvoorbeeld Testfasegroep",
- "groupsSelectionBladeTitle": "Groepen",
- "helpCommonScenariosText": "Geïnteresseerd in veelvoorkomende scenario's?",
- "helpCondition1": "Wanneer een gebruiker zich buiten het netwerk van het bedrijf bevindt",
- "helpCondition2": "Wanneer gebruikers in de groep Beheerders zich aanmelden",
- "helpConditionsTitle": "Voorwaarden",
- "helpControl1": "Ze moeten zich aanmelden met meervoudige verificatie",
- "helpControl2": "Deze moeten gebruik maken van een apparaat dat conform Intune is of onderdeel van een domein is",
- "helpControlsTitle": "Besturingselementen",
- "helpIntroText": "Met voorwaardelijke toegang kunt u in specifieke omstandigheden toegangsvereisten afdwingen. Hier volgen enkele voorbeelden",
- "helpIntroTitle": "Wat is voorwaardelijke toegang?",
- "helpLearnMoreText": "Wilt u meer informatie over voorwaardelijke toegang?",
- "helpStartStep1": "Maak uw eerste beleid door op + Nieuw beleid te klikken",
- "helpStartStep2": "Geef beleidsvoorwaarden en -besturingselementen op",
- "helpStartStep3": "Wanneer u klaar bent, klikt u op Beleid inschakelen en op Maken",
- "helpStartTitle": "Aan de slag",
- "highRisk": "Hoog",
- "includeAndExcludeAppsTextFormat": "Opnemen: {0}. Uitsluiten: {1}.",
- "includeAppsTextFormat": "Opnemen: {0}",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Onbekende gebieden zijn IP-adressen die niet kunnen worden toegewezen aan een land/regio.",
- "includeUnknownAreasCheckboxLabel": "Onbekende gebieden opnemen",
- "infoCommandLabel": "Info",
- "invalidCertDuration": "Ongeldige certificaatduur",
- "invalidIpAddress": "De waarde moet een geldig IP-adres zijn",
- "invalidReAuthSignInRiskOptionSelected": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' staat de selectie 'geen risico' in het besturingselement voor aanmeldingsrisico's niet toe.",
- "invalidUriErrorMsg": "Voer een geldige URI in. Bijvoorbeeld: uri:contoso.com:acr",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Alles laden",
- "loading": "Laden...",
- "locationConfigureNamedLocationsText": "Alle vertrouwde locaties configureren",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "De locatienaam is te lang. U kunt maximaal 256 tekens gebruiken",
- "locationSelectionBladeExcludeDescription": "De locaties selecteren die van het beleid moeten worden uitgesloten",
- "locationSelectionBladeIncludeDescription": "De locaties selecteren die in dit beleid moeten worden opgenomen",
- "locationsAllLocationsLabel": "Elke locatie",
- "locationsAllNamedLocationsLabel": "Alle vertrouwde IP-adressen",
- "locationsAllPrivateLinksLabel": "Alle persoonlijke koppelingen in mijn tenant",
- "locationsIncludeExcludeLabel": "{0} en alle vertrouwde IP-adressen uitsluiten",
- "locationsSelectedPrivateLinksLabel": "Geselecteerde persoonlijke koppelingen",
- "lowRisk": "Laag",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "Uw organisatie heeft Microsoft Entra ID P1 of P2 nodig voor het beheren van beleid voor voorwaardelijke toegang.",
- "manageSecurityDefaultsAriaLabel": "Standaardinstellingen voor beveiliging beheren.",
- "markAsTrustedCheckboxInfoBalloonContent": "Met het aanmelden vanaf een vertrouwde locatie wordt het aanmeldingsrisico van een gebruiker verlaagd. Markeer deze locatie alleen als vertrouwd als u er zeker van bent dat de IP-bereiken bekend en betrouwbaar zijn in uw organisatie.",
- "markAsTrustedCheckboxLabel": "Als vertrouwde locatie markeren",
- "mediumRisk": "Gemiddeld",
- "memberSelectionCommandRemove": "Verwijderen",
- "menuItemClaimProviderControls": "Aangepaste besturingselementen (preview)",
- "menuItemClassicPolicies": "Klassieke beleidsregels",
- "menuItemInsightsAndReporting": "Inzichten en rapportage",
- "menuItemManage": "Beheren",
- "menuItemNamedLocationsPreview": "Benoemde locaties (preview-versie)",
- "menuItemNamedNetworks": "Benoemde locaties",
- "menuItemPolicies": "Beleidsregels",
- "menuItemTermsOfUse": "Gebruiksvoorwaarden",
- "modifiedTimeLabel": "Tijd gewijzigd",
- "monday": "maandag",
- "nameLabel": "Naam",
- "namedLocationCountryInfoBanner": "Alleen IPv4-adressen worden aan landen/regio's toegewezen. IPv6-adressen zijn opgenomen in onbekende landen/regio's.",
- "namedLocationTypeCountry": "Landen/regio's",
- "namedLocationTypeLabel": "De locatie definiëren met het volgende:",
- "namedLocationUpsellBanner": "Deze weergave is afgeschaft. Ga naar de nieuwe en verbeterde weergave 'Benoemde locaties'.",
- "namedLocationsHelpDescription": "Benoemde locaties worden voor Microsoft Entra ID-beveiligingsrapporten gebruikt om het aantal fout-positieven te verminderen en voor het Microsoft Entra-beleid voor voorwaardelijke toegang.\n[Meer informatie][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Een nieuw IP-bereik toevoegen (bijvoorbeeld 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "U moet ten minste één land/regio selecteren",
- "namedNetworkDeleteCommand": "Verwijderen",
- "namedNetworkDeleteDescription": "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt.",
- "namedNetworkDeleteTitle": "Weet u het zeker?",
- "namedNetworkDownloadIpRange": "Downloaden",
- "namedNetworkInvalidRange": "De waarde moet een geldig IP-bereik zijn.",
- "namedNetworkIpRangeNeeded": "U hebt ten minste één geldig IP-bereik nodig",
- "namedNetworkIpRangesDescriptionContent": "Configureer de IP-adresbereiken van uw organisatie",
- "namedNetworkIpRangesTab": "IP-bereiken",
- "namedNetworkListAdd": "Nieuwe locatie",
- "namedNetworkListConfigureTrustedIps": "Vertrouwde IP-adressen voor meervoudige verificatie configureren",
- "namedNetworkNameDescription": "Bijvoorbeeld: Kantoor in Redmond",
- "namedNetworkNameInvalid": "De opgegeven naam is ongeldig.",
- "namedNetworkNameRequired": "U moet een naam opgeven voor deze locatie.",
- "namedNetworkNoIpRanges": "Geen IP-bereiken",
- "namedNetworkNotificationCreateDescription": "De locatie {0} wordt gemaakt",
- "namedNetworkNotificationCreateFailedDescription": "Kan de locatie {0} niet maken. Probeer het later opnieuw.",
- "namedNetworkNotificationCreateFailedTitle": "Kan de locatie niet maken",
- "namedNetworkNotificationCreateSuccessDescription": "De locatie {0} is gemaakt",
- "namedNetworkNotificationCreateSuccessTitle": "{0} is gemaakt",
- "namedNetworkNotificationCreateTitle": "{0} maken...",
- "namedNetworkNotificationDeleteDescription": "De locatie {0} wordt verwijderd",
- "namedNetworkNotificationDeleteFailedDescription": "Kan de locatie {0} niet verwijderen. Probeer het later opnieuw.",
- "namedNetworkNotificationDeleteFailedTitle": "Kan de locatie niet verwijderen",
- "namedNetworkNotificationDeleteSuccessDescription": "De locatie {0} is verwijderd",
- "namedNetworkNotificationDeleteSuccessTitle": "{0} is verwijderd",
- "namedNetworkNotificationDeleteTitle": "{0} verwijderen...",
- "namedNetworkNotificationUpdateDescription": "De locatie {0} wordt bijgewerkt",
- "namedNetworkNotificationUpdateFailedDescription": "Kan de locatie {0} niet bijwerken. Probeer het later opnieuw.",
- "namedNetworkNotificationUpdateFailedTitle": "Kan de locatie niet bijwerken",
- "namedNetworkNotificationUpdateSuccessDescription": "De locatie {0} is bijgewerkt",
- "namedNetworkNotificationUpdateSuccessTitle": "{0} is bijgewerkt",
- "namedNetworkNotificationUpdateTitle": "{0} bijwerken...",
- "namedNetworkSearchPlaceholder": "Locaties zoeken.",
- "namedNetworkUploadFailedDescription": "Er is een fout opgetreden bij het parseren van het opgegeven bestand. Zorg ervoor dat u een bestand zonder opmaak en met alle regels in CIDR-indeling uploadt.",
- "namedNetworkUploadFailedTitle": "Kan {0} niet parseren",
- "namedNetworkUploadInProgressDescription": "Er wordt geprobeerd geldige CIDR-waarden uit {0} te parseren.",
- "namedNetworkUploadInProgressTitle": "{0} parseren",
- "namedNetworkUploadInvalidDescription": "{0} is te groot of heeft een ongeldige indeling.",
- "namedNetworkUploadInvalidTitle": "{0} is ongeldig",
- "namedNetworkUploadIpRange": "Uploaden",
- "namedNetworkUploadSuccessDescription": "Er zijn {0} regels geanalyseerd. {1} met een verkeerde indeling. {2} overgeslagen.",
- "namedNetworkUploadSuccessTitle": "Parseren van {0} is voltooid",
- "namedNetworksAdd": "Nieuwe benoemde locatie",
- "namedNetworksConditionHelpDescription": "Gebruikerstoegang beheren op basis van de fysieke locatie.\n[Meer informatie][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} en {1} uitgesloten",
- "namedNetworksHelpDescription": "Benoemde locaties worden voor Microsoft Entra ID-beveiligingsrapporten gebruikt om het aantal fout-positieven te verminderen en voor het Microsoft Entra-beleid voor voorwaardelijke toegang.\n[Meer informatie][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} opgenomen",
- "namedNetworksNone": "Kan geen benoemde locaties vinden.",
- "namedNetworksTitle": "Locaties configureren",
- "namednetworkExceedingSizeErrorBladeTitle": "Details van fout",
- "namednetworkExceedingSizeErrorDetailText": "Klik hier voor meer details.",
- "namednetworkExceedingSizeErrorMessage": "U hebt de maximale toegestane opslag voor benoemde locaties overschreden. Probeer het opnieuw met een kortere lijst. Klik hier voor meer informatie.",
- "needMfaSecondary": "'Meervoudige verificatie vereisen' moet worden geselecteerd wanneer 'Aanmeldingsfrequentie elke keer' is geselecteerd met 'Alleen secundaire verificatiemethoden'",
- "needMfaSpecificApps": "Voor het sessiebeheer 'aanmeldingsfrequentie elke keer' is het toekenningsbeheer 'Meervoudige verificatie vereisen' vereist wanneer specifiek ondersteunde apps worden geselecteerd",
- "newCertName": "nieuw certificaat",
- "noAttributePermissionsError": "Onvoldoende bevoegdheden om beleid te maken of bij te werken. De rol van kenmerkdefinitielezer is vereist om dynamische filters toe te voegen of te bewerken.",
- "noPolicyRowMessage": "Geen beleidsregels",
- "noSPSelected": "Er is geen service-principal geselecteerd",
- "noUpdatePermissionMessage": "U hebt geen machtigingen om deze instellingen bij te werken. Neem contact op met de globale beheerder om toegang aan te vragen.",
- "noUserSelected": "Geen gebruiker geselecteerd",
- "noneRisk": "Geen risico",
- "office365Description": "Deze apps omvatten onder meer Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online en Office 365 Yammer.",
- "office365InfoBox": "Ten minste één van de geselecteerde apps is onderdeel van Office 365. U kunt het beste in plaats hiervan het beleid instellen voor de Office 365-app.",
- "oneUserSelected": "1 gebruiker geselecteerd",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Alleen globale beheerders kunnen dit beleid opslaan.",
- "or": "{0} OF {1} ",
- "pickerDoneCommand": "Gereed",
- "policiesBladeAdPremiumUpsellBannerText": "Maak uw eigen beleid en richt u op specifieke voorwaarden, zoals cloud-apps, aanmeldingsrisico's en apparaatplatforms met Microsoft Entra ID Premium",
- "policiesBladeTitle": "Beleidsregels",
- "policiesBladeTitleWithAppName": "Beleid: {0}",
- "policiesDisabledBannerText": "Het maken en bewerken van beleid is niet toegestaan voor toepassingen waaraan een aanmeldingskenmerk is gekoppeld.",
- "policiesHitMaxLimitStatusBarMessage": "U hebt het maximale aantal beleidsregels voor deze tenant bereikt. Verwijder enkele beleidsregels voordat u er meer maakt.",
- "policyAssignmentsSection": "Toewijzingen",
- "policyBlockAllInfoBox": "Het geconfigureerde beleid blokkeert alle gebruikers, dus dit wordt niet ondersteund. Controleer de toewijzingen en besturingselementen. Sluit de huidige gebruiker {0} uit als u dit beleid wilt opslaan.",
- "policyCloudAppsDisplayTextAllApp": "Alle apps",
- "policyCloudAppsLabel": "Cloud-apps",
- "policyConditionClientAppDescription": "Software die de gebruiker implementeert voor toegang tot de cloud-app, bijvoorbeeld Browser",
- "policyConditionClientAppV2Description": "Software die de gebruiker implementeert voor toegang tot de cloud-app, bijvoorbeeld Browser",
- "policyConditionDevicePlatform": "Apparaatplatformen",
- "policyConditionDevicePlatformDescription": "Platform waarmee de gebruiker zich aanmeldt, bijvoorbeeld iOS",
- "policyConditionLocation": "Locaties",
- "policyConditionLocationDescription": "Locatie (bepaald op basis van IP-adresbereik) waarvandaan de gebruiker zich aanmeldt",
- "policyConditionLocationPreview": "Locaties (preview)",
- "policyConditionSigninRisk": "Aanmeldingsrisico",
- "policyConditionSigninRiskDescription": "De kans dat iemand anders dan de gebruiker zich probeert aan te melden. Het risiconiveau kan hoog, gemiddeld of laag zijn. Hiervoor is een Microsoft Entra ID P2-licentie vereist.",
- "policyConditionUserRisk": "Gebruikersrisico",
- "policyConditionUserRiskDescription": "Gebruikersrisiconiveaus configureren die nodig zijn om beleid af te dwingen",
- "policyConditioniClientApp": "Client-apps",
- "policyControlAllowAccessDisplayedName": "Toegang verlenen",
- "policyControlAuthenticationStrengthDisplayedName": "Verificatiesterkte vereisen (preview)",
- "policyControlBladeTitle": "Verlenen",
- "policyControlBlockAccessDisplayedName": "Toegang blokkeren",
- "policyControlCompliantDeviceDisplayedName": "Vereisen dat het apparaat moet worden gemarkeerd als compatibel",
- "policyControlContentDescription": "Het afdwingen van toegang beheren om toegang te blokkeren of te verlenen.",
- "policyControlInfoBallonText": "Toegang blokkeren of aanvullende vereisten selecteren waaraan moet worden voldaan voordat toegang wordt verleend",
- "policyControlMfaChallengeDisplayedName": "Meervoudige verificatie vereisen",
- "policyControlRequireCompliantAppDisplayedName": "Beleid voor app-beveiliging vereisen",
- "policyControlRequireDomainJoinedDisplayedName": "Vereisen dat apparaten zijn samengevoegd met hybride Microsoft Entra",
- "policyControlRequireMamDisplayedName": "Goedgekeurde client-apps vereisen",
- "policyControlRequiredPasswordChangeDisplayedName": "Wachtwoordwijziging vereisen",
- "policyControlSelectAuthStrength": "Verificatiesterkte vereisen",
- "policyControlsNoControlsSelected": "0 besturingselementen geselecteerd",
- "policyControlsSection": "Besturingselementen voor toegang",
- "policyCreatBladeTitle": "Nieuw",
- "policyCreateButton": "Maken",
- "policyCreateFailedMessage": "Fout: {0}",
- "policyCreateFailedTitle": "Kan {0} niet maken",
- "policyCreateInProgressTitle": "{0} maken...",
- "policyCreateSuccessMessage": "{0} is gemaakt. Het beleid wordt over enkele minuten ingeschakeld als u Beleid inschakelen hebt ingesteld op Aan.",
- "policyCreateSuccessTitle": "{0} is gemaakt",
- "policyDeleteConfirmation": "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt.",
- "policyDeleteFailTitle": "Kan {0} niet verwijderen",
- "policyDeleteInProgressTitle": "{0} verwijderen...",
- "policyDeleteSuccessTitle": "{0} is verwijderd",
- "policyEnforceLabel": "Beleid inschakelen",
- "policyErrorCannotSetSigninRisk": "U beschikt niet over de benodigde machtigingen om een beleid met een voorwaarde voor aanmeldingsrisico op te slaan.",
- "policyErrorNoPermission": "U beschikt niet over de benodigde machtiging om het beleid op te slaan. Neem contact op met de globale beheerder.",
- "policyErrorUnknown": "Er is iets fout gegaan. Probeer het later opnieuw.",
- "policyFallbackWarningMessage": "Kan {0} niet maken of bijwerken met Microsoft Graph, wat resulteert in een terugval naar AD Graph. Onderzoek het volgende scenario omdat er waarschijnlijk een fout optreedt bij het aanroepen van het beleidseindpunt voor Microsoft Graph met een incompatibele voorwaarde.",
- "policyFallbackWarningTitle": "{0} maken of bijwerken is gedeeltelijk voltooid",
- "policyNameCannotBeEmpty": "De naam van het beleid mag niet leeg zijn",
- "policyNameDevice": "Apparaatbeleid",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Mobile App Management-beleid",
- "policyNameMfaLocation": "Meervoudige verificatie en locatiebeleid",
- "policyNamePlaceholderText": "Bijvoorbeeld: App-beleid voor apparaatcompatibiliteit",
- "policyNameTooLongError": "De beleidsnaam is te lang. U kunt maximaal 256 tekens gebruiken.",
- "policyOff": "Uit",
- "policyOn": "Aan",
- "policyReportOnly": "Alleen rapporteren",
- "policyReviewSection": "Beoordelen",
- "policySaveButton": "Opslaan",
- "policyStatusIconDescription": "Beleid ingeschakeld",
- "policyStatusIconEnabled": "Ingeschakeld statuspictogram",
- "policyTemplateName1": "Door apps gehandhaafde beperkingen gebruiken voor browsertoegang van {0}",
- "policyTemplateName2": "Alleen toegang tot beheerde apparaten toestaan voor {0}",
- "policyTemplateName3": "Het beleid is gemigreerd van instellingen van Continue toegangsevaluatie",
- "policyTriggerRiskSpecific": "Specifiek risiconiveau selecteren",
- "policyTriggersInfoBalloonText": "Voorwaarden waarmee wordt gedefinieerd wanneer het beleid van toepassing is, bijvoorbeeld locatie",
- "policyTriggersNoConditionsSelected": "0 voorwaarden geselecteerd",
- "policyTriggersSelectorLabel": "Voorwaarden",
- "policyUpdateFailedMessage": "Fout: {0}",
- "policyUpdateFailedTitle": "Kan {0} niet bijwerken",
- "policyUpdateInProgressTitle": "{0} bijwerken",
- "policyUpdateSuccessMessage": "{0} is bijgewerkt. Het beleid wordt over enkele minuten ingeschakeld als u Beleid inschakelen hebt ingesteld op Aan.",
- "policyUpdateSuccessTitle": "{0} is bijgewerkt",
- "primaryCol": "Primair",
- "privateLinkLabel": "Microsoft Entra Private Link",
- "reportOnlyInfoBox": "Modus voor alleen rapporteren: beleidsregels worden geëvalueerd en geregistreerd tijdens aanmelden, maar dit heeft geen impact voor gebruikers.",
- "requireAllControlsText": "Alle geselecteerde besturingselementen vereisen",
- "requireCompliantDevice": "Compatibel apparaat vereisen",
- "requireDomainJoined": "Aan domein toegevoegd apparaat vereisen",
- "requireGrantReauth": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' vereist meervoudige verificatie of 'wachtwoordwijziging vereisen' wanneer 'Alle cloud-apps' is geselecteerd",
- "requireMFA": "Meervoudige verificatie vereisen",
- "requireMfaReauth": "Voor het sessiebeheer 'aanmeldingsfrequentie elke keer' is het toekenningsbeheer 'meervoudige verificatie vereisen' vereist voor 'aanmeldingsrisico'",
- "requireOneControlText": "Een van de geselecteerde besturingselementen vereisen",
- "requirePasswordChangeReauth": "Voor het sessiebeheer 'aanmeldingsfrequentie elke keer' is de toekenningsbesturing 'wachtwoordwijziging vereisen' vereist voor 'gebruikersrisico'",
- "requireRiskReauth": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' vereist het sessiebeheer 'gebruikersrisico' of 'aanmeldingsrisico' wanneer 'alle cloud-apps' is geselecteerd.",
- "requireRiskReauthRiskNotEnabled": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' is niet beschikbaar wanneer 'alle cloud-apps' is geselecteerd.",
- "requireRiskReauthSignInOnly": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' vereist het sessiebeheer 'aanmeldingsrisico' wanneer 'alle cloud-apps' is geselecteerd.",
- "requireRiskReauthUserOnly": "Het sessiebesturingselement 'aanmeldingsfrequentie elke keer' vereist het sessiebeheer 'gebruikersrisico' wanneer 'alle cloud-apps' is geselecteerd.",
- "resetFilters": "Filters opnieuw instellen",
- "sPRequired": "Service-principal vereist",
- "sPSelectorInfoBalloon": "De gebruiker of service-principal die u wilt testen",
- "saturday": "zaterdag",
- "searchTextTooLongError": "De zoektekst is te lang. Het maximum is 256 tekens",
- "securityDefaultsPolicyName": "Standaardinstellingen voor beveiliging",
- "securityDefaultsTextMessage": "Standaardinstellingen voor beveiliging moeten zijn uitgeschakeld om beleid voor voorwaardelijke toegang in te schakelen.",
- "securityDefaultsUpdateInProgressText": "Er wordt een standaardupdate voor beveiliging uitgevoerd. Wacht even en probeer het opnieuw.",
- "securityDefaultsWarningMessage": "U gaat nu de beveiligingsconfiguraties van uw organisatie beheren. Goed hoor! U moet eerst de {0}standaardinstellingen voor beveiliging uitschakelen{0} voordat u een beleid voor voorwaardelijke toegang inschakelt.",
- "selectDevicePlatforms": "Apparaatplatformen selecteren",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Locaties selecteren",
- "selectedSP": "Geselecteerde service-principal",
- "servicePrincipalBladeExcludedSelectorTitle": "Uitgesloten service-principals selecteren",
- "servicePrincipalBladeIncludedSelectorTitle": "Service-principal selecteren",
- "servicePrincipalDataGridAria": "Lijst met beschikbare service-principals",
- "servicePrincipalDropDownLabel": "Waarop is dit beleid van toepassing?",
- "servicePrincipalInfoBox": "Sommige voorwaarden zijn niet beschikbaar vanwege de selectie '{0}' in beleidstoewijzing",
- "servicePrincipalRadioAll": "Alle service-principals in eigendom",
- "servicePrincipalRadioSelect": "Service-principal selecteren",
- "servicePrincipalSelectionsAria": "Geselecteerd service-principalsraster",
- "servicePrincipalSelectorAria": "Lijst met gekozen service-principals",
- "servicePrincipalSelectorMultiple": "{0} service-principal zijn geselecteerd",
- "servicePrincipalSelectorSingle": "1 service-principal is geselecteerd",
- "servicePrincipalSpecificExc": "Specifieke service-principals uitgesloten",
- "servicePrincipalSpecificInc": "Specifieke service-principals opgenomen",
- "servicePrincipals": "Service-principals",
- "sessionControlBladeTitle": "Sessie",
- "sessionControlDescriptionContent": "Beheer de toegang op basis van sessiebeheer om beperkte ervaringen in specifieke cloudtoepassingen in te schakelen.",
- "sessionControlDisableInfo": "Dit besturingselement werkt alleen bij ondersteunde apps. Office 365, Exchange Online en SharePoint Online zijn momenteel de enige cloud-apps die door apps gehandhaafde beperkingen ondersteunen. Klik hier voor meer informatie.",
- "sessionControlInfoBallonText": "Met de sessiebesturingselementen wordt de beperkte ervaring in een cloud-app ingeschakeld.",
- "sessionControls": "Sessiebesturingselementen",
- "sessionControlsAppEnforcedLabel": "Door apps gehandhaafde beperkingen gebruiken",
- "sessionControlsCasLabel": "App-beheer voor voorwaardelijke toegang gebruiken",
- "sessionControlsSecureSignInLabel": "Tokenbinding vereist",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} opgenomen",
- "signinRiskReauth": "De voorwaarde 'Aanmeldingsrisico' moet worden geselecteerd wanneer 'Meervoudige verificatie vereisen' en sessiebeheer 'aanmeldingsfrequentie elke keer' zijn geselecteerd",
- "signinRiskTriggerDescriptionContent": "Het niveau voor het aanmeldingsrisico selecteren",
- "singleTenantServicePrincipalInfoBallonText": "Beleid is alleen van toepassing op service-principals met één tenant die eigendom zijn van uw organisatie. Klik hier voor meer informatie ",
- "specificSigninRiskLevelsOption": "Specifieke risiconiveaus voor aanmeldingen selecteren",
- "specificUsersExcluded": "specifieke gebruikers uitgesloten",
- "specificUsersIncluded": "Specifieke gebruikers opgenomen",
- "specificUsersIncludedAndExcluded": "Specifieke uitgesloten en opgenomen gebruikers",
- "startDatePickerLabel": "Start",
- "startFreeTrial": "Start een gratis proefversie",
- "startTimePickerLabel": "Begintijd",
- "sunday": "zondag",
- "testButton": "What If",
- "thumbprintCol": "Vingerafdruk",
- "thursday": "donderdag",
- "timeConditionAllTimesLabel": "Willekeurig",
- "timeConditionIntroText": "De tijd configureren waarop dit beleid van toepassing is",
- "timeConditionSelectorInfoBallonContent": "Wanneer de gebruiker zich aanmeldt, bijvoorbeeld woensdag van 09:00 - 17:00 uur CEST",
- "timeConditionSelectorLabel": "Tijd (preview)",
- "timeConditionSpecificLabel": "Specifieke tijden",
- "timeSelectorAllTimesText": "Willekeurig",
- "timeSelectorSpecificTimesText": "Specifieke geconfigureerde tijden",
- "timeZoneDropdownInfoBalloonContent": "Selecteer een tijdzone waarmee het tijdsbereik wordt gedefinieerd. Dit beleid is van toepassing op gebruikers in alle tijdzones. Zo kan 'woensdag van 9:00 - 17:00' het tijdsbereik voor de ene gebruiker zijn en 'woensdag van 10;00 - 18:00 uur' het tijdsbereik voor een gebruiker in een andere tijdzone.",
- "timeZoneDropdownLabel": "Tijdzone",
- "timeZoneDropdownPlaceholderText": "Selecteer een tijdzone",
- "tooManyPoliciesDescription": "Alleen de eerste 50 beleidsregels worden nu weergegeven. Klik hier om alle beleidsregels weer te geven",
- "tooManyPoliciesTitle": "Meer dan 50 beleidsregels gevonden",
- "trustedLocationStatusIconDescription": "De locatie is vertrouwd",
- "trustedLocationStatusIconEnabled": "Pictogram voor vertrouwde status",
- "tuesday": "dinsdag",
- "uploadInBadState": "Kan het opgegeven bestand niet uploaden.",
- "upsellAppsDescription": "Altijd meervoudige verificatie vereisen voor gevoelige toepassingen of alleen voor toepassingen buiten het bedrijfsnetwerk.",
- "upsellAppsTitle": "Beveiligde toepassingen",
- "upsellBannerText": "Neem een gratis Premium-proefversie als u deze functie wilt gebruiken",
- "upsellDataDescription": "Vereisen dat het apparaat is gemarkeerd als conform of samengevoegd met hybride Microsoft Entra voordat toegang tot bedrijfsresources wordt toegestaan.",
- "upsellDataTitle": "Beveiligde gegevens",
- "upsellDescription": "Met voorwaardelijke toegang beschikt u over de controle en beveiliging die u nodig hebt om uw bedrijfsgegevens veilig te houden, terwijl gebruikers hun werkzaamheden op elk apparaat kunnen uitvoeren. U kunt bijvoorbeeld de toegang van buiten het bedrijfsnetwerk beperken of de toegang beperken tot apparaten die voldoen aan het nalevingsbeleid.",
- "upsellRiskDescription": "Meervoudige verificatie vereisen voor risicogebeurtenissen die worden gedetecteerd door het machine learning-systeem van Microsoft.",
- "upsellRiskTitle": "Beschermen tegen risico's",
- "upsellTitle": "Voorwaardelijke toegang",
- "upsellWhyTitle": "Waarom zou ik voorwaardelijke toegang gebruiken?",
- "userAppNoneOption": "Geen",
- "userNamePlaceholderText": "Gebruikersnaam invoeren",
- "userNotSetSeletorLabel": "0 gebruikers en groepen geselecteerd",
- "userOnlySelectionBladeExcludeDescription": "De gebruikers selecteren die van het beleid moeten worden uitgesloten",
- "userOrGroupSelectionCountDiffBannerText": "{0} die zijn geconfigureerd in dit beleid, zijn uit de map verwijderd, maar dit heeft geen invloed op de andere gebruikers en groepen in het beleid. De volgende keer dat u het beleid bijwerkt, worden de verwijderde gebruikers en/of groepen automatisch verwijderd.",
- "userOrSPNotSetSelectorLabel": "0 gebruikers of werkbelastingsidentiteiten geselecteerd",
- "userOrSPSelectionBladeTitle": "Gebruikers of werkbelastingsidentiteiten",
- "userOrSPSelectorInfoBallonText": "Identiteiten in de map waarop het beleid van toepassing is, inclusief gebruikers, groepen en service-principals",
- "userRequired": "Gebruiker vereist",
- "userRiskErrorBox": "De voorwaarde Gebruikersrisico moet worden geselecteerd wanneer de toekenning Wachtwoordwijziging vereisen is geselecteerd",
- "userRiskReauth": "\"Gebruikersrisico\"-voorwaarde en niet \"Aanmeldingsrisico\" moet worden geselecteerd wanneer toekenning \"Wachtwoordwijziging vereisen\" en sessiecontrole \"Aanmeldingsfrequentie elke keer\" zijn geselecteerd",
- "userSPRequired": "Gebruiker of service-principal vereist",
- "userSPSelectorTitle": "Gebruiker of werkbelastingsidentiteit",
- "userSelectionBladeAllUsersAndGroups": "Alle gebruikers en groepen",
- "userSelectionBladeExcludeDescription": "De gebruikers en groepen selecteren die van het beleid moeten worden uitgesloten",
- "userSelectionBladeExcludeTabTitle": "Uitsluiten",
- "userSelectionBladeExcludedSelectorTitle": "Uitgesloten gebruikers en groepen selecteren",
- "userSelectionBladeIncludeDescription": "De gebruikers selecteren waarop dit beleid van toepassing is",
- "userSelectionBladeIncludeTabTitle": "Opnemen",
- "userSelectionBladeIncludedSelectorTitle": "Selecteren",
- "userSelectionBladeSelectUsers": "Gebruikers selecteren",
- "userSelectionBladeSelectedUsers": "Gebruikers en groepen selecteren",
- "userSelectionBladeTitle": "Gebruikers en groepen",
- "userSelectorBladeTitle": "Gebruikers",
- "userSelectorExcluded": "{0} uitgesloten",
- "userSelectorGroupPlural": "{0} groepen",
- "userSelectorGroupSingular": "1 groep",
- "userSelectorIncluded": "{0} opgenomen",
- "userSelectorInfoBallonText": "Gebruikers en groepen in de map waarop het beleid van toepassing is, bijvoorbeeld Testfasegroep",
- "userSelectorSelected": "{0} geselecteerd",
- "userSelectorTitle": "Gebruiker",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} gebruikers",
- "userSelectorUserSingular": "1 gebruiker",
- "userSelectorWithExclusion": "{0} en {1}",
- "usersGroupsLabel": "Gebruikers en groepen",
- "viewApprovedAppsText": "Lijst met goedgekeurde clientapps weergeven",
- "viewCompliantAppsText": "Lijst met door beleid beveiligde client-apps weergeven",
- "viewPolicyInformation": "Beleidsgegevens weergeven",
- "vpnBladeTitle": "VPN-verbinding",
- "vpnCertCreateFailedMessage": "Fout: {0}",
- "vpnCertCreateFailedTitle": "Kan {0} niet maken",
- "vpnCertCreateInProgressTitle": "{0} maken",
- "vpnCertCreateSuccessMessage": "{0} is gemaakt.",
- "vpnCertCreateSuccessTitle": "{0} is gemaakt",
- "vpnCertNoRowsMessage": "Geen VPN-certificaten gevonden",
- "vpnCertUpdateFailedMessage": "Fout: {0}",
- "vpnCertUpdateFailedTitle": "Kan {0} niet bijwerken",
- "vpnCertUpdateInProgressTitle": "{0} bijwerken",
- "vpnCertUpdateSuccessMessage": "{0} is bijgewerkt.",
- "vpnCertUpdateSuccessTitle": "{0} is bijgewerkt",
- "vpnFeatureInfo": "Klik hier voor meer informatie over de VPN-verbinding en voorwaardelijke toegang.",
- "vpnFeatureWarning": "Nadat een VPN-certificaat is gemaakt in de portal, wordt het direct door Microsoft Entra ID gebruikt om certificaten met korte levensduur te verlenen aan de VPN-client. Het is van cruciaal belang dat het VPN-certificaat direct wordt geïmplementeerd op de VPN-server om eventuele problemen met de validatie van referenties van de VPN-client te voorkomen.",
- "vpnMenuText": "VPN-verbinding",
- "vpncertDropdownDefaultOption": "Duur",
- "vpncertDropdownInfoBalloonContent": "Selecteer de duur van het certificaat dat u wilt maken",
- "vpncertDropdownLabel": "Duur selecteren",
- "vpncertDropdownOneyearOption": "1 jaar",
- "vpncertDropdownThreeyearOption": "Drie jaar",
- "vpncertDropdownTwoyearOption": "Twee jaar",
- "wednesday": "woensdag",
- "whatIfCountry": "Land/regio",
- "whatIfCountryInfo": "Het land/de regio van waaruit de gebruiker zich aanmeldt.",
- "whatIfDevicePlatformInfo": "Het apparaatplatform waarmee de gebruiker zich aanmeldt.",
- "whatIfEnterIpAddress": "IP-adres invoeren (bijvoorbeeld 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "Er is een ongeldig IP-adres opgegeven.",
- "whatIfIpAddress": "IP-adres",
- "whatIfIpAddressInfo": "Het IP-adres waarvandaan de gebruiker zich aanmeldt.",
- "whatIfIpCountryInfoBoxText": "Als u een IP-adres of land/regio gebruikt, zijn beide velden vereist en moeten ze correct aan elkaar worden toegewezen.",
- "whatIfSelectCountry": "Land/regio selecteren",
- "whatIfSelectDevicePlatform": "Apparaatplatformen selecteren...",
- "whatIfSelectPrivateLink": "Privékoppeling selecteren...",
- "whatIfSelectSignInRisk": "Aanmeldingsrisico selecteren...",
- "whatIfSignInRisk": "Aanmeldingsrisico",
- "whatIfSignInRiskInfo": "Het risiconiveau gekoppeld aam de aanmelding",
- "whatIfUnknownAreas": "Onbekende gebieden",
- "windows365InfoBox": "Als u Windows 365 selecteert, is dit van invloed op verbindingen met cloud-pc's en Azure Virtual Desktop-sessiehosts. Klik hier voor meer informatie.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Workloadidentiteiten (preview-versie)",
- "workloadIdentitiesLicenseText": "Er is een premium P1- of P2-licentie voor workload-identiteiten vereist om dit beleid te bewerken.",
- "workloadIdentity": "Workload-identiteit"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Niet ondersteund",
- "supportEnding": "Ondersteuning eindigt",
- "supported": "Ondersteund"
- }
- },
- "SecurityTemplate": {
- "aSR": "Kwetsbaarheid voor aanvallen verminderen",
- "accountProtection": "Accountbeveiliging",
- "allDevices": "Alle apparaten",
- "antivirus": "Antivirus",
- "antivirusReporting": "Antivirusrapportage (preview)",
- "conditionalAccess": "Voorwaardelijke toegang",
- "deviceCompliance": "Apparaatnaleving",
- "diskEncryption": "Schijfversleuteling",
- "eDR": "Eindpuntdetectie en -reactie",
- "ePM": "Beheer van eindpuntbevoegdheden",
- "firewall": "Firewall",
- "helpSupport": "Help en ondersteuning",
- "setup": "Installatie",
- "wdapt": "Microsoft Defender for Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Mislukt",
- "hardReboot": "Hard opstarten",
- "retry": "Opnieuw",
- "softReboot": "Zacht opstarten",
- "success": "Geslaagd"
- },
- "Columns": {
- "codeType": "Codetype",
- "returnCode": "Retourcode"
- },
- "bladeTitle": "Retourcodes",
- "gridAriaLabel": "Retourcodes",
- "header": "Geef de retourcodes op het gedrag na installatie op te geven:",
- "onAddAnnounceMessage": "Item {0} van {1} met toegevoegde code retourneren",
- "onDeleteSuccess": "De retourcode is {0} verwijderd",
- "returnCodeAlreadyUsedValidation": "De retourcode wordt al gebruikt.",
- "returnCodeMustBeIntegerValidation": "De retourcode moet een geheel getal zijn.",
- "returnCodeShouldBeAtLeast": "De retourcode moet ten minste {0} zijn.",
- "returnCodeShouldBeAtMost": "De retourcode mag maximaal {0} zijn.",
- "selectorLabel": "Retourcodes"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabisch",
- "bulgarian": "Bulgaars",
- "chineseSimplified": "Chinees (Vereenvoudigd)",
- "chineseTraditional": "Chinees (Traditioneel)",
- "croatian": "Kroatisch",
- "czech": "Tsjechisch",
- "danish": "Deens",
- "dutch": "Nederlands",
- "englishUK": "Engels (Verenigd Koninkrijk)",
- "englishUS": "Engels (Verenigde Staten)",
- "estonian": "Ests",
- "finnish": "Fins",
- "frenchCanada": "Frans (Canada)",
- "frenchFrance": "Frans (Frankrijk)",
- "german": "Duits",
- "greek": "Grieks",
- "hebrew": "Hebreeuws",
- "hungarian": "Hongaars",
- "italian": "Italiaans",
- "japanese": "Japans",
- "korean": "Koreaans",
- "latvian": "Lets",
- "lithuanian": "Litouws",
- "norwegian": "Noors (Bokmål)",
- "polish": "Pools",
- "portugueseBrazil": "Portugees (Brazilië)",
- "portuguesePortugal": "Portugees (Portugal)",
- "romanian": "Roemeens",
- "russian": "Russisch",
- "serbian": "Servisch",
- "slovak": "Slowaaks",
- "slovenian": "Sloveens",
- "spanishMexico": "Spaans (Mexico)",
- "spanishSpain": "Spaans (Spanje)",
- "swedish": "Zweeds",
- "thai": "Thailand",
- "turkish": "Turks",
- "ukrainian": "Oekraïens"
- },
- "Summary": {
- "placeholder": "Selecteer aan de linkerkant een meldingsbericht om een voorbeeld van de inhoud te bekijken."
- },
- "companyContact": "Contactgegevens weergeven",
- "companyLogo": "Bedrijfslogo weergeven",
- "companyName": "Bedrijfsnaam weergeven",
- "createEditDescription": "Maak of bewerk meldingsberichtsjablonen.",
- "createMessage": "Bericht maken",
- "deviceDetails": "Apparaatgegevens weergeven",
- "deviceDetailsInfoBox": "Deze instelling is standaard uitgeschakeld, omdat het ophalen van apparaatgegevens kan leiden tot een vertraging bij het ontvangen van e-mailmeldingen.",
- "editImpactInfo": "Als u deze sjabloon voor meldingsberichten bewerkt, heeft dit gevolgen voor alle beleidsregels die de sjabloon gebruiken.",
- "editMessage": "Bericht bewerken",
- "email": "e-mail",
- "emailFooterTitle": "Voettekst van e-mail",
- "emailHeaderFooterInfo": "Instellingen voor kop- en voetteksten voor e-mailmeldingen zijn afhankelijk van aanpassingsinstellingen binnen het tenantbeheerknooppunt in Endpoint Manager.",
- "emailHeaderTitle": "Koptekst van e-mail",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Aanpassingsinstellingen configureren",
- "formSubTitle": "E-mailmeldingen maken of wijzigen",
- "headerFooterSettingsTab": "Instellingen voor koptekst en voettekst",
- "imgPreview": "Voorbeeld van afbeelding",
- "infotext": "Selecteer een meldingsbericht. Ga naar Meldingen in het gedeelte Beheer van de workload Apparaatcompatibiliteit instellen om een nieuwe melding te maken.",
- "iwLink": "Koppeling naar bedrijfsportalwebsite weergeven",
- "listEmpty": "Er zijn geen berichtsjablonen.",
- "listEmptySelectOnly": "Er zijn geen berichtsjablonen. Ga naar Meldingen in het gedeelte Beheer van de workload Apparaatcompatibiliteit instellen om een nieuwe melding te maken.",
- "listSubTitle": "Lijst met sjablonen voor meldingsberichten",
- "listTitle": "Meldingsberichtsjablonen",
- "localizedNotificationMessageTemplates": "Gelokaliseerde sjablonen voor meldingsberichten",
- "messageAssigned": "Kan de berichtsjabloon niet verwijderen omdat deze momenteel wordt gebruikt door een of meer beleidsregels voor naleving.",
- "messageCapitalized": "Meldingsberichtsjabloon",
- "messageLowercase": "meldingsberichtsjabloon",
- "missingDefaultError": "Een standaardsjabloon selecteren",
- "notificationMessageTemplates": "Meldingsberichtsjablonen",
- "rowValidationError": "Er is minimaal één berichtsjabloon vereist",
- "selectDescription": "Selecteer een meldingsbericht. Ga naar Meldingen in het gedeelte Beheer van de workload Apparaatcompatibiliteit instellen om een nieuwe melding te maken.",
- "tenantValueText": "Tenantwaarde",
- "testEmailLabel": "Een voorbeeld van het e-mailbericht verzenden",
- "localeLabel": "Landinstellingen",
- "isDefaultLocale": "Is standaard"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Het aantal dagen dat moet worden gewacht voordat opnieuw opstarten wordt afgedwongen"
- },
"Description": {
"label": "Beschrijving"
},
+ "FeatureDeploymentSettings": {
+ "header": "Instellingen voor implementatie van functies"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Met deze functie kan geen downgrade voor een apparaat worden uitgevoerd.",
+ "label": "De functie-update die moet worden geïmplementeerd"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Beschikbaarheid laatste groep"
+ },
+ "GradualRolloutInterval": {
+ "label": "Dagen tussen groepen"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Beschikbaarheid eerste groep"
+ },
"Name": {
"label": "Naam"
},
- "QualityUpdateRelease": {
- "label": "De installatie van kwaliteitsupdates versnellen als de besturingssysteemversie van het apparaat lager is dan:"
- },
- "bladeTitle": "Kwaliteitsupdates Windows 10 en hoger (preview)",
- "loadError": "Kan niet laden."
+ "OptionalUpdate": {
+ "label": "Vereiste of optionele update"
+ },
+ "RolloutOptions": {
+ "label": "Implementatieopties"
+ },
+ "RolloutSettings": {
+ "header": "Wanneer wilt u de update beschikbaar maken in Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Bereiktags voor dit beleid configureren."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "Eerste beschikbare datum"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Uitgeschakeld",
+ "enabled": "Ingeschakeld",
+ "infoBalloonContent": "Bepaal of u de nieuwste Windows 10-onderdelenupdate wilt installeren op apparaten die niet in aanmerking komen voor Windows 11",
+ "label": "Wanneer een apparaat niet in aanmerking komt voor het uitvoeren van Windows 11, installeert u de nieuwste Windows 10-onderdelenupdate",
+ "notApplicable": "Niet van toepassing",
+ "summaryLabel": "Installeer Windows 10 op apparaten die niet in aanmerking komen voor Windows 11"
+ },
+ "bladeTitle": "Implementaties van onderdelenupdate",
+ "deploymentSettingsTitle": "Implementatie-instellingen",
+ "loadError": "Kan niet laden.",
+ "windows11EULA": "Door deze onderdelenupdate voor implementeren in te schakelen gaat u ermee akkoord dat bij het toepassen van dit besturingssysteem op een apparaat (1) de toepasselijke Windows-licentie is aangeschaft via de volumelicentie of (2) dat u gemachtigd bent om uw organisatie te binden en namens haar de relevante Licentievoorwaarden voor Microsoft-software accepteert die u hier {0} kunt vinden."
},
+ "Notifications": {
+ "deploymentSaved": "{0} is opgeslagen.",
+ "newFeatureUpdateDeploymentCreated": "Nieuwe implementatie voor onderdelenupdate gemaakt."
+ },
"TabName": {
- "qualityUpdateSettings": "Instellingen"
+ "deploymentSettings": "Implementatie-instellingen",
+ "groupAssignmentSettings": "Toewijzingen",
+ "scopeSettings": "Bereiktags"
},
- "infoBoxText": "Het enige besturingselement voor kwaliteitsupdates dat momenteel beschikbaar is naast het bestaande beleid voor update-ringen van Windows 10 en hoger, is de mogelijkheid om kwaliteitsupdates te versnellen voor apparaten die buiten een opgegeven patchniveau vallen. In de toekomst zullen meer besturingselementen beschikbaar zijn.",
- "licenseLearnMoreText": "Meer informatie over vereisten en beleid voor kwaliteitsupdates.",
- "licenseWarningBoxText": "Voor het maken van beleid voor kwaliteitsupdates zijn specifieke licenties vereist.",
- "warningBoxText": "Door het versnellen van software-updates kunt u weliswaar de benodigde tijd voor het verkrijgen van naleving (indien nodig) verkorten, maar dit heeft bredere gevolgen voor de productiviteit van eindgebruikers. De kans dat gebruikers te maken krijgen met een herstart tijdens kantooruren neemt hierdoor aanzienlijk toe."
+ "gradualRolloutLicenseWarning": "Voor deze mogelijkheid zijn specifieke licenties vereist.",
+ "gradualRolloutLicenseWarningEdit": "Deze mogelijkheid kan worden gebruikt en geconfigureerd totdat het beleid wordt opgeslagen zonder dat deze mogelijkheid is geselecteerd.",
+ "licenseLearnMoreText": "Meer informatie over vereisten en beleidsregels voor onderdelenupdates.",
+ "optionalUpdateWarning": "Optioneel is alleen beschikbaar voor Windows 11-updates",
+ "profileNameWarning": "De naam moet minder dan 64 tekens bevatten",
+ "specificLicensingRequired": "Voor sommige geselecteerde mogelijkheden zijn specifieke licenties vereist."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64-bits",
- "thirtyTwoBit": "32-bits"
- },
- "TACSettings": {
- "edgeSettings": "Configuratie-instellingen voor Microsoft Edge",
- "edgeWindowsDataProtectionSettings": "Instellingen voor gegevensbescherming van Microsoft Edge (Windows) - Preview",
- "edgeWindowsSettings": "Instellingen voor configuratie van Microsoft Edge (Windows) - Preview",
- "generalAppConfig": "Algemene app-configuratie",
- "generalSettings": "Algemene configuratie-instellingen",
- "outlookSMIMEConfig": "S/MIME-instellingen voor Outlook",
- "outlookSettings": "Configuratie-instellingen voor Outlook",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Netwerkgrens toevoegen",
- "addNetworkBoundaryButton": "Netwerkgrens toevoegen...",
- "allowWindowsSearch": "Toestaan dat Windows Search versleutelde bedrijfsgegevens en Store-apps doorzoekt",
- "authoritativeIpRanges": "De lijst IP-bereiken van ondernemingen is bindend (geen automatische detectie toepassen)",
- "authoritativeProxyServers": "De lijst Proxyservers van onderneming is bindend (geen automatische detectie toepassen)",
- "boundaryType": "Grenstype",
- "cloudResources": "Cloudresources",
- "corporateIdentity": "Bedrijfsidentiteit",
- "dataRecoveryCert": "Een DRA-certificaat (Data Recovery Agent) uploaden zodat versleutelde gegevens kunnen worden hersteld",
- "editNetworkBoundary": "Netwerkgrens bewerken",
- "enrollmentState": "Inschrijvingsstatus",
- "iPv4Ranges": "IPv4-bereiken",
- "iPv6Ranges": "IPv6-bereiken",
- "internalProxyServers": "Interne proxyservers",
- "maxInactivityTime": "De maximale hoeveelheid tijd (in minuten) die het apparaat niet-actief mag zijn voordat het apparaat wordt vergrendeld met een pincode of wachtwoord",
- "maxPasswordAttempts": "Het aantal toegestane mislukte authenticaties voordat een apparaat wordt gewist",
- "mdmDiscoveryUrl": "Detectie-URL voor MDM",
- "mdmRequiredSettingsInfo": "Dit beleid is alleen van toepassing op Windows 10 Anniversary Edition en hoger. Met dit beleid word gebruikgemaakt van Windows Information Protection (WIP) voor beveiliging.",
- "minimumPinLength": "Het minimum aantal tekens instellen dat is vereist voor de pincode",
- "name": "Naam",
- "networkBoundariesGridEmptyText": "De netwerkgrenzen die u hebt toegevoegd, worden hier weergegeven",
- "networkBoundary": "De grens van het netwerk",
- "networkDomainNames": "Netwerkdomeinen",
- "neutralResources": "Neutrale resources",
- "passportForWork": "Windows Hello voor Bedrijven gebruiken als methode om u aan te melden bij Windows",
- "pinExpiration": "Opgeven gedurende welke periode (in dagen) een pincode mag worden gebruikt voordat de gebruiker deze van het systeem moet wijzigen",
- "pinHistory": "Het aantal oude pincodes dat kan worden toegewezen aan een gebruikersaccount opgeven die niet opnieuw kunnen worden gebruikt.",
- "pinLowercaseLetters": "Het gebruik van kleine letters in de pincode voor Windows Hello voor Bedrijven configureren",
- "pinSpecialCharacters": "Het gebruik van speciale tekens in de pincode voor Windows Hello voor Bedrijven configureren",
- "pinUppercaseLetters": "Het gebruik van hoofdletters in de pincode voor Windows Hello voor Bedrijven configureren",
- "protectUnderLock": "Voorkomen dat bedrijfsgegevens toegankelijk zijn via apps wanneer het apparaat is vergrendeld. Dit is alleen van toepassing op Windows 10 Mobile",
- "protectedDomainNames": "Beveiligde domeinen",
- "proxyServers": "Proxyservers",
- "requireAppPin": "App-pincode uitschakelen wanneer de pincode van het apparaat wordt beheerd",
- "requiredSettings": "Verplichte instellingen",
- "requiredSettingsInfo": "Als u het bereik wijzigt of dit beleid verwijdert, worden de bedrijfsgegevens ontsleuteld.",
- "revokeOnMdmHandoff": "Toegang tot beveiligde gegevens intrekken wanneer het apparaat wordt ingeschreven bij MDM",
- "revokeOnUnenroll": "Versleutelingssleutels intrekken bij het ongedaan maken van de registratie",
- "rmsTemplateForEdp": "De sjabloon-id opgeven die moet worden gebruikt voor Azure RMS",
- "showWipIcon": "Het pictogram voor ondernemingsgegevensbescherming weergeven",
- "type": "Type",
- "useRmsForWip": "Azure RMS voor WIP gebruiken",
- "value": "Waarde",
- "weRequiredSettingsInfo": "Dit beleid is alleen van toepassing op Windows 10-makersupdate en hoger. Met dit beleid word gebruikgemaakt van Windows Information Protection (WIP) en Windows MAM voor beveiliging.",
- "wipProtectionMode": "Modus Windows Information Protection",
- "withEnrollment": "Met inschrijving",
- "withoutEnrollment": "Zonder inschrijving"
+ "Platform": {
+ "all": "Alles",
+ "android": "Android-apparaatbeheerder",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Algemeen",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS en Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Onbekend",
+ "unsupported": "Niet-ondersteund",
+ "windows": "Windows",
+ "windows10": "Windows 10 en later",
+ "windows10CM": "Windows 10 en hoger (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 en later",
+ "windows8And10": "Windows 8 en 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 en later",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 en Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 en hoger (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows-pc"
+ },
+ "InstallIntent": {
+ "available": "Beschikbaar voor ingeschreven apparaten",
+ "availableWithoutEnrollment": "Beschikbaar met of zonder inschrijving",
+ "required": "Vereist",
+ "uninstall": "Verwijderen"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filter",
+ "noFilters": "Geen"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Auteur",
- "template": "Sjabloonnaam"
- },
- "Row": {
- "ariaLabel": "rij {0} van {1} kolom {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Begin helemaal opnieuw en selecteer de gewenste eigenschappen in de bibliotheek met beschikbare inventariseigenschappen"
- },
- "SettingsCatalog": {
- "subtitle": "Begin nieuwe instellingen en selecteer de gewenste instellingen in de bibliotheek met beschikbare instellingen",
- "title": "Catalogus met instellingen"
- },
- "Templates": {
- "subtitle": "Sjablonen bevatten groepen instellingen, geordend op functionaliteit. Gebruik een sjabloon als u niet handmatig beleidsregels wilt maken of als u apparaten wilt configureren voor toegang tot bedrijfsnetwerken, zoals het configureren van wifi of een VPN.",
- "title": "Sjablonen"
- },
- "noData": "Er zijn geen beleidssjablonen gevonden"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop Client",
- "visioProRetail": "Visio Online-abonnement 2"
- },
- "Countries": {
- "ae": "Verenigde Arabische Emiraten",
- "ag": "Antigua en Barbuda",
- "ai": "Anguilla",
- "al": "Albanië",
- "am": "Armenië",
- "ao": "Angola",
- "ar": "Argentinië",
- "at": "Oostenrijk",
- "au": "Australië",
- "az": "Azerbeidzjan",
- "bb": "Barbados",
- "be": "België",
- "bf": "Burkina Faso",
- "bg": "Bulgarije",
- "bh": "Bahrein",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolivia",
- "br": "Brazilië",
- "bs": "Bahama's",
- "bt": "Bhutan",
- "bw": "Botswana",
- "by": "Belarus",
- "bz": "Belize",
- "ca": "Canada",
- "cg": "Republiek Congo",
- "ch": "Zwitserland",
- "cl": "Chili",
- "cn": "China",
- "co": "Colombia",
- "cr": "Costa Rica",
- "cv": "Republiek van Cabo Verde",
- "cy": "Cyprus",
- "cz": "Tsjechië",
- "de": "Duitsland",
- "dk": "Denemarken",
- "dm": "Dominica",
- "do": "Dominicaanse Republiek",
- "dz": "Algerije",
- "ec": "Ecuador",
- "ee": "Estland",
- "eg": "Egypte",
- "es": "Spanje",
- "fi": "Finland",
- "fj": "Fiji",
- "fm": "Federale Staten van Micronesia",
- "fr": "Frankrijk",
- "gb": "Verenigd Koninkrijk",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Griekenland",
- "gt": "Guatemala",
- "gw": "Guinee-Bissau",
- "gy": "Guyana",
- "hk": "Hongkong SAR",
- "hn": "Honduras",
- "hr": "Kroatië",
- "hu": "Hongarije",
- "id": "Indonesië",
- "ie": "Ierland",
- "il": "Israël",
- "in": "India",
- "is": "IJsland",
- "it": "Italië",
- "jm": "Jamaica",
- "jo": "Jordanië",
- "jp": "Japan",
- "ke": "Kenia",
- "kg": "Kirgistan",
- "kh": "Cambodja",
- "kn": "Saint Kitts en Nevis",
- "kr": "Republiek Korea",
- "kw": "Koeweit",
- "ky": "Kaaimaneilanden",
- "kz": "Kazachstan",
- "la": "Democratische Volksrepubliek Laos",
- "lb": "Libanon",
- "lc": "Saint Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Litouwen",
- "lu": "Luxemburg",
- "lv": "Letland",
- "md": "Republiek Moldavië",
- "mg": "Madagaskar",
- "mk": "Noord-Macedonië",
- "ml": "Mali",
- "mn": "Mongolië",
- "mo": "Macau",
- "mr": "Mauritanië",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Mexico",
- "my": "Maleisië",
- "mz": "Mozambique",
- "na": "Namibië",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Nederland",
- "no": "Noorwegen",
- "np": "Nepal",
- "nz": "Nieuw-Zeeland",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papoea-Nieuw-Guinea",
- "ph": "Filippijnen",
- "pk": "Pakistan",
- "pl": "Polen",
- "pt": "Portugal",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Roemenië",
- "ru": "Rusland",
- "sa": "Saoedi-Arabië",
- "sb": "Salomonseilanden",
- "sc": "Seychellen",
- "se": "Zweden",
- "sg": "Singapore",
- "si": "Slovenië",
- "sk": "Slowakije",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Suriname",
- "st": "Sao Tomé en Principe",
- "sv": "El Salvador",
- "sz": "Swaziland",
- "tc": "Turks- en Caicoseilanden",
- "td": "Tsjaad",
- "th": "Thailand",
- "tj": "Tadzjikistan",
- "tm": "Turkmenistan",
- "tn": "Tunesië",
- "tr": "Turkije",
- "tt": "Trinidad en Tobago",
- "tw": "Taiwan",
- "tz": "Tanzania",
- "ua": "Oekraïne",
- "ug": "Oeganda",
- "us": "Verenigde Staten",
- "uy": "Uruguay",
- "uz": "Oezbekistan",
- "vc": "St. Vincent en de Grenadines",
- "ve": "Venezuela",
- "vg": "Britse Maagdeneilanden",
- "vn": "Vietnam",
- "ye": "Jemen",
- "za": "Zuid-Afrika",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Huidig kanaal",
- "deferred": "Halfjaarlijks ondernemingskanaal",
- "firstReleaseCurrent": "Huidig kanaal (preview-versie)",
- "firstReleaseDeferred": "Halfjaarlijks ondernemingskanaal (preview-versie)",
- "monthlyEnterprise": "Monthly-kanaal (Enterprise)",
- "placeHolder": "Kies een optie"
- },
- "AppProtection": {
- "allAppTypes": "Doel voor alle app-typen",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Apps in Android for Work-profiel",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps op toegewezen Android Enterprise-apparaten met gedeelde Microsoft Entra-modus",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Apps op Android Open Source Project met gekoppelde gebruiker",
- "appsOnAndroidOpenSourceProjectUserless": "Apps op Android Open Source Project zonder gebruiker",
- "appsOnIntuneManagedDevices": "Apps op door Intune beheerde apparaten",
- "appsOnUnmanagedDevices": "Apps op niet-beheerde apparaten",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Niet beschikbaar",
- "windows10PlatformLabel": "Windows 10 en later",
- "withEnrollment": "Met inschrijving",
- "withoutEnrollment": "Zonder inschrijving"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Ingebouwde rol",
- "customCloudPCRole": "Aangepaste Windows 365-rol",
- "customIntuneRole": "Aangepaste Intune-rol",
- "customRole": "Aangepaste rol"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} maakt deel uit van een of meer beleidssets. Als u {0} verwijdert, kunt u deze niet langer toewijzen via deze beleidssets. Wilt u toch verwijderen?",
- "contentWithError": "{0} maakt mogelijk deel uit van een of meer beleidssets. Als u {0} verwijdert, kunt u deze niet langer toewijzen via deze beleidssets. Wilt u toch verwijderen?",
- "header": "Weet u zeker dat u deze beperking wilt verwijderen?"
- },
- "DeviceLimit": {
- "description": "Geef het maximum aantal apparaten op dat een gebruiker kan registreren.",
- "header": "Beperkingen voor apparaatlimieten",
- "info": "Hiermee geeft u op hoeveel apparaten elke gebruiker kan registreren."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Moet 1,0 of hoger zijn.",
- "android": "Voer een geldig versienummer in. Voorbeelden: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Voer een geldig versienummer in. Voorbeelden: 5.0, 5.1.1",
- "iOS": "Voer een geldig versienummer in. Voorbeelden: 9.0, 10.0, 9.0.2",
- "mac": "Voer een geldig versienummer in. Voorbeelden: 10, 10.10, 10.10.1",
- "min": "De minimumwaarde mag niet lager zijn dan {0}",
- "minMax": "De minimale versie mag niet groter zijn dan de maximale versie.",
- "windows": "Moet 10.0 of hoger zijn. Laat dit leeg als u ook 8.1-apparaten wilt toestaan.",
- "windowsMobile": "Moet 10.0 of hoger zijn. Laat dit leeg als u ook 8.1-apparaten wilt toestaan."
- },
- "allPlatformsBlocked": "Alle apparaatplatformen zijn geblokkeerd. Sta platforminschrijving toe om platformconfiguratie in te schakelen.",
- "blockManufacturerPlaceHolder": "Naam van fabrikant",
- "blockManufacturersHeader": "Geblokkeerde fabrikanten",
- "cannotRestrict": "De beperking wordt niet ondersteund",
- "configurationDescription": "Hiermee geeft u de configuratiebeperkingen voor het platform op waaraan een apparaat moet voldoen om te kunnen worden geregistreerd. Gebruik regels voor nalevingsbeleid om apparaten na de registratie te beperken. Geef versies als major.minor.build op. Versiebeperkingen zijn alleen van toepassing op apparaten die zijn geregistreerd bij de bedrijfsportal. Apparaten worden in Intune standaard geclassificeerd als persoonlijke apparaten. Er is aanvullende actie vereist als u apparaten wilt classificeren als apparaten in bedrijfseigendom.",
- "configurationDescriptionLabel": "Meer informatie over het instellen van inschrijvingsbeperkingen",
- "configurations": "Platformen configureren",
- "deviceManufacturer": "Fabrikant van apparaat",
- "header": "Beperkingen voor apparaattypen",
- "info": "Hiermee geeft u op welke platformen, besturingssysteemversies en eigendomstypen kunnen worden geregistreerd.",
- "manufacturer": "Fabrikant",
- "max": "Max.",
- "maxVersion": "Maximumversie",
- "min": "Min",
- "minVersion": "Minimumversie",
- "newPlatforms": "U hebt nieuwe platformen toegestaan. Werk de platformconfiguraties bij.",
- "personal": "Persoonlijk eigendom",
- "platform": "Platform",
- "platformDescription": "U kunt de volgende platformen inschrijven. Blokkeer alleen platformen die u niet ondersteunt. Toegestane platformen kunnen worden geconfigureerd met aanvullende inschrijvingsbeperkingen.",
- "platformSettings": "Platforminstellingen",
- "platforms": "Platformen selecteren",
- "platformsSelected": "{0} platformen geselecteerd",
- "type": "Type",
- "versions": "versies",
- "versionsRange": "Min/max bereik toestaan:",
- "windowsTooltip": "Hiermee beperkt u de inschrijving via Mobile Device Management. De installatie van de pc-agent wordt niet beperkt. Alleen Windows 10- en Windows 11-versies worden ondersteund. Laat dit leeg als u Windows 8.1 wilt toestaan."
- },
- "Priority": {
- "saved": "De prioriteiten van de beperking zijn opgeslagen."
- },
- "Row": {
- "announce": "Prioriteit: {0}, naam: {1}, toegewezen: {2}"
- },
- "Table": {
- "deployed": "Geïmplementeerd",
- "name": "Naam",
- "priority": "Prioriteit"
- },
- "Type": {
- "limit": "Beperking voor apparaatlimiet",
- "type": "Beperking voor apparaattype"
- },
- "allUsers": "Alle gebruikers",
- "androidRestrictions": "Android-beperkingen",
- "create": "Beperking maken",
- "defaultLimitDescription": "Dit is de standaardlimietbeperking voor apparaten die met de laagste prioriteit wordt toegepast op alle gebruikers, ongeacht hun groepslidmaatschap.",
- "defaultTypeDescription": "Dit is de standaardtypebeperking voor apparaten die met de laagste prioriteit wordt toegepast op alle gebruikers, ongeacht hun groepslidmaatschap.",
- "defaultWhfbDescription": "Dit is de standaardconfiguratie voor typebeperking voor Windows Hello voor Bedrijven die met de laagste prioriteit wordt toegepast op alle gebruikers, ongeacht hun groepslidmaatschap.",
- "deleteMessage": "Betrokken gebruikers worden beperkt door de toegewezen beperking van het volgende niveau of door de standaardbeperking als er geen andere beperking is toegewezen.",
- "deleteTitle": "Weet u zeker dat u de beperking {0} wilt verwijderen?",
- "descriptionHint": "Korte alinea met een beschrijving van het zakelijke gebruik of het beperkingsniveau op basis van de instellingen van de beperking.",
- "edit": "Beperking bewerken",
- "info": "Een apparaat moet voldoen aan de beperkingen met hoogste prioriteit voor inschrijving die zijn toegewezen aan de gebruiker. U kunt een apparaatbeperking slepen om de prioriteit te wijzigen. Standaardbeperkingen hebben de laagste prioriteit voor alle gebruikers en zijn van toepassing op inschrijvingen zonder gebruiker. Standaardbeperkingen kunnen worden bewerkt, maar niet verwijderd.",
- "iosRestrictions": "iOS-beperkingen",
- "mDM": "MDM",
- "macRestrictions": "macOS-beperkingen",
- "maxVersion": "Maximale versie",
- "minVersion": "Minimale versie",
- "nameHint": "Dit is het primaire kenmerk dat zichtbaar is voor de identificatie van de ingestelde beperking.",
- "noAssignmentsStatusBar": "Wijs de beperking toe aan minimaal één groep. Klik op Eigenschappen.",
- "nonAdminForbiddenCreateError": "U moet een Intune-service of globale beheerder zijn om beperkingen te kunnen maken, bewerken of verwijderen.",
- "nonAdminForbiddenEdit": "U moet een beheerder zijn om beperkingen te bewerken.",
- "notFound": "Beperking niet gevonden. Het is mogelijk al verwijderd.",
- "personallyOwned": "Apparaten met persoonlijke eigendom",
- "restriction": "Beperking",
- "restrictionLowerCase": "beperking",
- "restrictionType": "Beperkingstype",
- "selectType": "Beperkingstype selecteren",
- "selectValidation": "Selecteer een platform",
- "typeHint": "Kies Apparaattypebeperking om de apparaateigenschappen te beperken. Kies Apparaatlimietbeperking om het aantal apparaten per gebruiker te beperken.",
- "typeRequired": "Beperkingstype is vereist.",
- "winPhoneRestrictions": "Windows Phone-beperkingen",
- "windowsECv1Info": "Oudere inschrijvingsbeperkingen kunnen niet worden bewerkt of een nieuwe prioriteit krijgen. Deze kunnen alleen worden verwijderd.",
- "windowsECv2Info": "U kunt prioriteit geven aan inschrijvingsbeperkingen door deze te slepen en neer te zetten. Bekijk de standaard- en vooraf geconfigureerde beperkingen hieronder. Alle nieuwe inschrijvingsbeperkingen hebben een hogere prioriteit dan standaard- en vooraf geconfigureerde beperkingen.",
- "windowsRestrictions": "Windows-beperkingen",
- "windowsRestrictionsPreview": "Windows-beperkingen op basis van filters (preview-versie)"
- },
- "InstallContextType": {
- "device": "Apparaat",
- "deviceContext": "Apparaatcontext",
- "user": "Gebruiker",
- "userContext": "Gebruikerscontext"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Beschrijving",
- "placeholder": "Een beschrijving invoeren..."
- },
- "NameTextBox": {
- "label": "Naam",
- "placeholder": "Een naam invoeren"
- },
- "PublisherTextBox": {
- "label": "Uitgever",
- "placeholder": "Voer een uitgever in"
- },
- "VersionTextBox": {
- "label": "Versie"
- },
- "headerDescription": "Maak een nieuw aangepast scriptpakket op basis van detectie- en herstelscripts die u hebt geschreven."
- },
- "ScopeTags": {
- "headerDescription": "Selecteer een of meer groepen om het scriptpakket toe te wijzen."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Detectiescript",
- "placeholder": "Scripttekst invoeren",
- "requiredValidationMessage": "Voer het detectiescript in"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Controle van scripthandtekening afdwingen"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Dit script uitvoeren met de referenties van de aangemelde gebruiker"
- },
- "RemediationScript": {
- "infoBox": "Dit script wordt uitgevoerd in de modus voor alleen detecteren omdat er geen herstelscript is."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Script voor automatisch doorvoeren",
- "placeholder": "Scripttekst invoeren"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Script uitvoeren in 64-bits PowerShell"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Ongeldig script. Een of meer tekens die in het script worden gebruikt, zijn ongeldig."
- },
- "headerDescription": "Maak een aangepast scriptpakket op basis van de door u geschreven scripts. Standaard worden scripts elke dag op toegewezen apparaten uitgevoerd.",
- "infoBox": "Dit script is alleen-lezen. Een aantal instellingen voor dit script is mogelijk uitgeschakeld."
- },
- "title": "Aangepast script maken",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Interval",
- "time": "Datum en tijd"
- },
- "Interval": {
- "day": "Wordt elke dag herhaald",
- "days": "Wordt om de {0} dagen herhaald",
- "hour": "Wordt elk uur herhaald",
- "hours": "Wordt om de {0} uur herhaald",
- "month": "Wordt elke maand herhaald",
- "months": "Wordt om de {0} maanden herhaald",
- "week": "Wordt elke week herhaald",
- "weeks": "Wordt om de {0} weken herhaald"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) op {1}",
- "withDate": "{0} op {1}"
- }
- }
- },
- "Edit": {
- "title": "Bewerken - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Toegestane URL's",
- "tooltip": "Geef de sites op waartoe uw gebruikers toegang hebben in hun werkcontext. Er zijn geen andere sites toegestaan. U kunt ervoor kiezen om een lijst met toegestane/geblokkeerde apps te configureren, maar niet beide. "
- },
- "ApplicationProxyRedirection": {
- "header": "Toepassingsproxy",
- "title": "Toepassingsproxy omleiden",
- "tooltip": "Schakel de omleiding van toepassingsproxy's in om gebruikers toegang te geven tot koppelingen van het bedrijf en on-premises web-apps."
- },
- "BlockedURLs": {
- "title": "Geblokkeerde URL's",
- "tooltip": "Geef de sites op die voor uw gebruikers zijn geblokkeerd in hun werkcontext. Alle andere sites zijn toegestaan. U kunt ervoor kiezen om een lijst met toegestane/geblokkeerde apps te configureren, maar niet beide. "
- },
- "Bookmarks": {
- "header": "Beheerde bladwijzers",
- "tooltip": "Voer een lijst met URL-adressen in die beschikbaar zijn voor uw gebruikers wanneer ze gebruikmaken van Microsoft Edge in hun werkcontext.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Beheerde startpagina",
- "title": "Snelkoppelings-URL voor startpagina",
- "tooltip": "Configureer een snelkoppeling voor de startpagina die voor gebruikers als het eerste pictogram onder de zoekbalk wordt weergegeven wanneer een nieuw tabblad wordt geopend in Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Beperkte sites omleiden naar persoonlijke context",
- "tooltip": "Configureer of gebruikers mogen overschakelen naar hun persoonlijke context om beperkte sites te openen."
- }
- },
- "BooleanActions": {
- "allow": "Toestaan",
- "block": "Blokkeren",
- "configured": "Geconfigureerd",
- "disable": "Uitschakelen",
- "dontRequire": "Niet vereisen",
- "enable": "Inschakelen",
- "hide": "Verbergen",
- "limit": "Limiet",
- "notConfigured": "Niet geconfigureerd",
- "require": "Vereisen",
- "show": "Weergeven",
- "yes": "Ja"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Beschikbaar maken voor gebruikers als een optionele update",
- "optionalValue": "Optioneel",
- "required": "Beschikbaar maken voor gebruikers als een vereiste update",
- "requiredValue": "Vereist"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 dag",
- "twoDays": "2 dagen",
- "zeroDays": "0 dagen"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Overzicht"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Zoeken op het apparaat, gebruiker of versie van de kwaliteitsupdate."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Kan de updateprofielen voor iOS-software niet laden"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS-updateprofiel",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profiel"
- },
- "listLoadError": "Kan de updateprofielen voor iOS-software niet laden. Probeer het later opnieuw",
- "lowercase": "iOS-updatebeleid",
- "uppercase": "iOS-updatebeleid"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Er kan geen verbinding worden gemaakt met Apple om de lijst met beschikbare versies op te halen. Probeer het later opnieuw of ga door met de nieuwste versie.",
- "latestUpdate": "Laatste update",
- "noLongerSupported": "De geselecteerde versie wordt niet meer ondersteund",
- "olderVersionSelected": "Doordat u een eerdere versie hebt geselecteerd, moet u een restrictiebeleid toepassen waarmee de zichtbaarheid van software-updates wordt uitgesteld zodat apparaten niet kunnen worden bijgewerkt naar de nieuwste versie.",
- "prefix": "iOS/iPadOS installeren",
- "selectSupported": "De updateversie selecteren die wordt ondersteund door Apple",
- "updateToInstall": "Update voor installatie"
- },
- "Schedule": {
- "always": "Bijwerken bij volgende keer inchecken",
- "duringTimeWindows": "Bijwerken op gepland tijdstip",
- "header": "Wanneer een updatebeleid is toegewezen aan een apparaat, implementeert Intune standaard de nieuwste updates bij het inchecken van het apparaat. U kunt in plaats daarvan een wekelijks schema maken met aangepaste begin- en eindtijden. Als u ervoor kiest om bij te werken buiten de geplande tijd, implementeert Intune geen updates totdat de geplande tijd is afgelopen.",
- "infoBalloon": "Wanneer de updates worden uitgevoerd. Aanvullende invoer is vereist om updates te plannen tijdens of buiten geplande tijden.",
- "label": "Type planning",
- "outsideActiveHours": "Bijwerken buiten gebruikstijden (verouderd)",
- "outsideTimeWindows": "Bijwerken buiten gepland tijdstip",
- "timeWindow": "Tijdvenster",
- "timeZone": "Tijdzone",
- "title": "Instellingen voor planning van updatebeleid:",
- "weekly": "Wekelijkse planning",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "De versie van iOS/iPadOS die op apparaten moet worden geïnstalleerd op het moment dat deze worden bijgewerkt.",
- "label": "Versie selecteren die moet worden geïnstalleerd"
- },
- "header": "Maak een profiel om af te dwingen dat de nieuwste iOS/iPadOS-updates automatisch worden geïnstalleerd op toegewezen apparaten. Deze instellingen bepalen hoe en wanneer software-updates worden geïmplementeerd. Het profiel voorkomt niet dat gebruikers het besturingssysteem handmatig kunnen bijwerken, al kan dit tot 90 dagen lang worden voorkomen met een restrictiebeleid voor apparaatinstellingen. De updates zijn alleen van toepassing op apparaten onder toezicht.",
- "notAvailable": "N.v.t."
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Er zijn geen iOS-updateregels die kunnen worden weergegeven",
- "macOsUpdates": "Er zijn geen updatebeleidsregels voor macOS-software die kunnen worden weergegeven",
- "windowsUpdates": "Er zijn geen update-ringen voor Windows 10 en hoger om weer te geven."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Apparaatnaam",
- "deviceUpdateStatus": "Updatestatus van apparaat",
- "lastUpdated": "Laatst bijgewerkt",
- "osVersion": "Besturingssysteemversie",
- "userPrincipalName": "Gebruikersnaam"
- },
- "maximumOSVersionFilter": "Maximale versie van het besturingssysteem",
- "minimumOSVersionFilter": "Minimale versie van het besturingssysteem",
- "noData": "Geen gegevens om weer te geven",
- "searchBoxPlaceholder": "Zoeken op apparaatnaam, gebruikersnaam of besturingssysteemversie",
- "title": "Accountsamenvatting voor macOS-apparaten"
- },
- "Category": {
- "configurationDataFile": "Configuratiegegevensbestand",
- "critical": "Kritiek",
- "firmware": "Firmware",
- "other": "Overige"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Laatst bijgewerkt",
- "successfulUpdateCount": "Correct geïmplementeerde updates",
- "totalUpdateCount": "Totaal geïmplementeerde updates",
- "updateCategory": "Updatecategorie",
- "updateCategoryStatus": "Status van updatecategorie"
- },
- "noData": "Geen gegevens om weer te geven"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Kan de updateprofielen voor macOS-software niet laden"
- }
- },
- "State": {
- "available": "Beschikbaar",
- "commandFailed": "Opdracht mislukt",
- "downloadFailed": "Het downloaden is mislukt",
- "downloadInsufficientNetwork": "Onvoldoende netwerkresources voor downloaden",
- "downloadInsufficientPower": "Onvoldoende voeding voor downloaden",
- "downloadInsufficientSpace": "Onvoldoende ruimte voor downloaden",
- "downloaded": "Gedownload",
- "downloading": "Downloaden",
- "idle": "Niet-actief",
- "installFailed": "De installatie is mislukt",
- "installInsufficientPower": "Onvoldoende voeding voor installeren",
- "installInsufficientSpace": "Onvoldoende ruimte voor installeren",
- "installing": "Installeren",
- "scheduled": "Gepland",
- "success": "Geslaagd",
- "unknown": "Onbekend"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Laatst bijgewerkt",
- "updateName": "Naam van de update",
- "updateStatus": "Updatestatus",
- "version": "Versie"
- },
- "noData": "Geen gegevens om weer te geven",
- "searchBoxPlaceholder": "Zoeken op updatenaam of -versie"
- },
- "SummaryBlade": {
- "subtitle": "macOS-updateprofiel",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profiel"
- },
- "error": "Fout",
- "errorOrErrors": "Fout(en)",
- "errors": "Fouten",
- "listLoadError": "Kan de updateprofielen voor macOS-software niet laden. Probeer het later opnieuw",
- "lowercase": "macOs-updatebeleid",
- "other": "Overige",
- "subtitle": "MacOS-software-update",
- "upToDate": "Bijgewerkt",
- "uppercase": "macOS-updatebeleid"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Probeer het later opnieuw",
- "title": "Kan {0} niet verwijderen"
- },
- "LoadAllConfigurationFailed": {
- "description": "Probeer het later opnieuw"
- },
- "LoadConfigurationFailed": {
- "description": "Probeer het later opnieuw",
- "title": "Kan {0} niet laden"
- },
- "idWrongFormat": "De opgegeven id voor het profiel heeft niet de verwachte indeling."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "Er moet minimaal één tijdvenster worden geselecteerd",
- "tooMany": "Er kunnen maximaal twintig tijdvensters worden geconfigureerd"
- }
- },
- "endDay": "Einddag",
- "endTime": "Eindtijd",
- "startDay": "Startdag",
- "startTime": "Begintijd",
- "timeWindowError": "Kies een tijdvak dat ten minste één uur beslaat."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Kan de update-ringprofielen voor Windows 10 en hoger niet laden."
- }
- },
- "SummaryBlade": {
- "subtitle": "Ring bijwerken voor Windows 10 en hoger",
- "title": "Windows Update voor Bedrijven"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 en later",
- "title": "Ring bijwerken voor Windows 10 en hoger"
- },
- "listLoadError": "Kan de update-ringen voor Windows 10 en hoger niet laden, probeer het later opnieuw",
- "lowercase": "Update-ring",
- "uppercase": "Update-ring"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Beleidsinstellingen bijwerken",
- "updateRingSettings": "Ringinstellingen bijwerken"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "{0} maken",
- "edit": "{0} bewerken"
- }
- },
- "notScannedYet": "Nog niet gescand",
- "outOfDateIosDevices": "Apparaten met verouderde iOS"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Apparaatbeperkingen (apparaateigenaar)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS-updatebeleid"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Is gelijk aan",
+ "greaterThan": "Groter dan",
+ "greaterThanOrEqualTo": "Groter dan of gelijk aan",
+ "lessThan": "Kleiner dan",
+ "lessThanOrEqualTo": "Kleiner dan of gelijk aan",
+ "notEqualTo": "Niet gelijk aan"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Controle van scripthandtekening afdwingen en script op de achtergrond uitvoeren",
+ "enforceSignatureCheckTooltip": "Selecteer Ja om op te geven dat het script is ondertekend door een vertrouwde uitgever. Hierdoor kan het script worden uitgevoerd zonder waarschuwingen of prompts. Het script wordt niet geblokkeerd en uitgevoerd. Selecteer Nee (standaard) om het script uit te voeren met bevestiging door de eindgebruiker zonder handtekeningverificatie.",
+ "header": "Een aangepast detectiescript gebruiken",
+ "runAs32Bit": "Script uitvoeren als 32 bitsproces op 64 bitsclients",
+ "runAs32BitTooltip": "Selecteer Ja als u het script in een 32 bitsproces op 64 bitsclients wilt uitvoeren. Selecteer Nee (standaard) als u het script in een 64 bitsproces op 64 bitsclients wilt uitvoeren. 32 bitsclients voeren het script uit in een 32 bitsproces.",
+ "scriptContent": "Scriptinhoud",
+ "scriptFile": "Scriptbestand",
+ "scriptFileNotSelectedValidation": "Er is geen scriptbestand geselecteerd.",
+ "scriptFileTooltip": "Selecteer een PowerShell-script waarmee de aanwezigheid van een app op de client wordt gedetecteerd. De app wordt gedetecteerd als het script zowel een afsluitcode van de waarde 0 retourneert als een tekenreekswaarde naar STDOUT schrijft.",
+ "scriptSizeLimitValidation": "Het detectiescript overschrijdt de maximaal toegestane grootte. Los dit op door de grootte van het detectiescript te verkleinen."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Gemaakt op",
+ "dateModified": "Gewijzigd op",
+ "doesNotExist": "Het bestand of de map bestaat niet.",
+ "fileOrFolderExists": "Bestand of map bestaat",
+ "sizeInMB": "Grootte in MB",
+ "version": "Tekenreeks (versie)"
+ },
+ "associatedWith32Bit": "Gekoppeld aan een 32 bitsapp op 64 bitsclients",
+ "associatedWith32BitTooltip": "Selecteer Ja als u omgevingsvariabelen in het pad in de 32 bitscontext op 64 bitsclients wilt uitbreiden. Selecteer Nee (standaard) als u padvariabelen wilt uitbreiden in de 64 bitscontext op 64 bitsclients. 32 bitsclients gebruiken altijd de 32 bitscontext.",
+ "detectionMethod": "Detectiemethode",
+ "detectionMethodTooltip": "Selecteer het type detectiemethode voor het valideren van de aanwezigheid van de app.",
+ "fileOrFolder": "Bestand of map",
+ "fileOrFolderToolTip": "Het bestand of de map voor de detectie.",
+ "operator": "Operator",
+ "operatorTooltip": "Selecteer de operator voor de detectiemethode voor het valideren van de vergelijking.",
+ "path": "Pad",
+ "pathTooltip": "Het volledige pad van de map met het bestand of de map die u wilt detecteren.",
+ "value": "Waarde",
+ "valueTooltip": "Selecteer een waarde die overeenkomt met de geselecteerde detectiemethode. Methoden voor datumdetectie moeten in de lokale tijd worden ingevoerd."
+ },
+ "GridColumns": {
+ "pathOrCode": "Pad/code",
+ "type": "Type"
+ },
+ "MsiRule": {
+ "operator": "Operator",
+ "operatorTooltip": "Selecteer de operator voor de validatievergelijking van de MSI-productversie.",
+ "productCode": "MSI-productcode",
+ "productCodeTooltip": "Een geldige MSI-productcode voor de app.",
+ "productVersion": "Waarde",
+ "productVersionCheck": "Versiecontrole van MSI-product",
+ "productVersionCheckTooltip": "Selecteer Ja om de MSI-productversie en de MSI-productcode te controleren.",
+ "productVersionTooltip": "Voer de MSI-productversie voor de app in."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Vergelijking van geheel getal",
+ "keyDoesNotExist": "Sleutel bestaat niet",
+ "keyExists": "Sleutel bestaat",
+ "stringComparison": "Vergelijking van tekenreeks",
+ "valueDoesNotExist": "Waarde bestaat niet",
+ "valueExists": "Waarde bestaat",
+ "versionComparison": "Vergelijking van versies"
+ },
+ "associatedWith32Bit": "Gekoppeld aan een 32 bitsapp op 64 bitsclients",
+ "associatedWith32BitTooltip": "Selecteer Ja als u het 32 bitsregister op 64 bitsclients wilt zoeken. Selecteer Nee (standaard) as u het 64 bitsregister op 64 bitsclients wilt zoeken. 32 bitsclients zoeken altijd naar het 32 bitsregister.",
+ "detectionMethod": "Detectiemethode",
+ "detectionMethodTooltip": "Selecteer het type detectiemethode voor het valideren van de aanwezigheid van de app.",
+ "keyPath": "Sleutelpad",
+ "keyPathTooltip": "Het volledige pad van de registervermelding die de waarde bevat die u wilt detecteren.",
+ "operator": "Operator",
+ "operatorTooltip": "Selecteer de operator voor de detectiemethode voor het valideren van de vergelijking.",
+ "value": "Waarde",
+ "valueName": "Waardenaam",
+ "valueNameTooltip": "De naam van de registerwaarde die u wilt detecteren.",
+ "valueTooltip": "Selecteer een waarde die overeenkomt met de geselecteerde detectiemethode."
+ },
+ "RuleTypeOptions": {
+ "file": "Bestand",
+ "mSI": "MSI",
+ "registry": "Register"
+ },
+ "gridAriaLabel": "Detectieregels",
+ "header": "Maak een regel die de aanwezigheid van de app aangeeft.",
+ "noRulesSelectedPlaceholder": "Er zijn geen machtigingen opgegeven.",
+ "ruleTableLimit": "U kunt maximaal 25 detectieregels toevoegen",
+ "ruleType": "Regeltype",
+ "ruleTypeTooltip": "Kies het type detectieregel dat u wilt toevoegen."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Een aangepast detectiescript gebruiken",
+ "manual": "Detectieregels handmatig configureren"
+ },
+ "bladeTitle": "Detectieregels",
+ "header": "Configureer specifieke regels voor de app voor het bepalen van de aanwezigheid van de app.",
+ "rulesFormat": "Regelnotatie",
+ "rulesFormatTooltip": "Kies of u de detectieregels handmatig wilt configureren of een aangepast script wilt gebruiken voor het detecteren van de aanwezigheid van de app.",
+ "selectorLabel": "Detectieregels"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "De licentievoorwaarden voor Microsoft-software accepteren namens gebruikers",
"appSuiteConfigurationLabel": "Configuratie van de app-suite",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} talen/taal geselecteerd",
"xmlConfigurationLabel": "XML-configuratie"
},
- "Filters": {
- "ruleSyntax": "Regelsyntaxis",
- "filters": "Filters"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Toestaan dat de gebruiker de instelling kan wijzigen",
- "tooltip": "Geef aan of de gebruiker de synchronisatie-instelling mag wijzigen."
- },
- "AllowWorkAccounts": {
- "title": "Alleen werk- of schoolaccounts toestaan",
- "tooltip": " Als u deze instelling inschakelt, kunnen gebruikers geen persoonlijke e-mail- en opslagaccounts toevoegen in Outlook. Als de gebruiker een persoonlijk account heeft toegevoegd aan Outlook, wordt de gebruiker gevraagd om dit te verwijderen. Als de gebruiker het persoonlijke account niet verwijdert, kan het werk- of schoolaccount niet worden toegevoegd."
- },
- "BlockExternalImages": {
- "title": "Externe afbeeldingen blokkeren",
- "tooltip": "Als de optie Externe afbeeldingen blokkeren is ingeschakeld, wordt met de app voorkomen dat afbeeldingen die op internet worden gehost en in de berichttekst zijn ingesloten, kunnen worden gedownload. Als de optie niet is geconfigureerd, wordt standaard de app-instelling Uit gebruikt"
- },
- "ConfigureEmail": {
- "title": "Instellingen van e-mailaccount configureren"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "In de standaardhandtekening voor de app wordt aangegeven of 'Outlook voor Android downloaden' als standaardhandtekening voor de app wordt gebruikt tijdens het opstellen van berichten. Als de instelling op Uit is ingesteld, wordt de standaardhandtekening niet gebruikt; gebruikers kunnen echter wel hun eigen handtekening toevoegen.\r\n\r\nWanneer deze instelling op Niet geconfigureerd is ingesteld, wordt de standaardinstelling voor de app ingesteld op Aan.",
- "iOS": "In de standaardhandtekening voor de app wordt aangegeven of 'Outlook voor iOS downloaden' als standaardhandtekening voor de app wordt gebruikt tijdens het opstellen van berichten. Als de instelling op Uit is ingesteld, wordt de standaardhandtekening niet gebruikt; gebruikers kunnen echter wel hun eigen handtekening toevoegen.\r\n\r\nWanneer deze instelling op Niet geconfigureerd is ingesteld, wordt de standaardinstelling voor de app ingesteld op Aan."
- },
- "title": "Standaardhandtekening voor apps"
- },
- "OfficeFeedReplies": {
- "title": "Feed detecteren",
- "tooltip": "Feeds detecteren van uw meest gebruikte Office-bestanden. Deze feed is standaard ingeschakeld wanneer Delve is ingeschakeld voor de gebruiker. Wanneer de instelling niet is geconfigureerd, is de app standaard ingesteld op Aan."
- },
- "OrganizeMailByThread": {
- "title": "E-mailberichten rangschikken op thread",
- "tooltip": "Standaard worden e-mailconversaties in Outlook gebundeld in een weergave met gespreksthreads. Als deze instelling is uitgeschakeld, wordt elk e-mailbericht in Outlook afzonderlijk weergegeven en worden berichten niet op thread gegroepeerd."
- },
- "PlayMyEmails": {
- "title": "Mijn e-mailberichten afspelen",
- "tooltip": "De functie Mijn e-mailberichten afspelen is standaard niet ingeschakeld in de app, maar wordt aangeboden aan in aanmerking komende gebruikers via een banner in het Postvak IN. Wanneer deze functie is ingesteld op Uit, wordt deze niet aangeboden aan in aanmerking komende gebruikers in de app. Gebruikers kunnen ervoor kiezen Mijn e-mailberichten afspelen handmatig in te schakelen vanuit de app, zelfs wanneer deze functie is ingesteld op Uit. Als deze optie is ingesteld als Niet geconfigureerd, is de standaardinstelling voor de app Aan en wordt de functie aangeboden aan in aanmerking komende gebruikers."
- },
- "SuggestedReplies": {
- "title": "Voorgestelde antwoorden",
- "tooltip": "Wanneer u een bericht opent, kan Outlook antwoorden voorstellen onder het bericht. Als u een voorgesteld antwoord selecteert, kunt u het antwoord bewerken voordat u het verzendt."
- },
- "SyncCalendars": {
- "title": "Agenda's synchroniseren",
- "tooltip": "Configureren of gebruikers hun Outlook-agenda kunnen synchroniseren met de systeemeigen agenda-app en -database."
- },
- "TextPredictions": {
- "title": "Tekstvoorspellingen",
- "tooltip": "Outlook kan woorden en zinsdelen voorstellen bij het opstellen van berichten. Wanneer Outlook een suggestie geeft, kunt u vegen om deze te accepteren. Wanneer deze functie niet is geconfigureerd, is de app-standaardinstelling Aan."
- },
- "ThemesEnabled": {
- "title": "Thema's zijn ingeschakeld",
- "tooltip": "Opgeven of de gebruiker een aangepast visueel thema mag gebruiken."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS-apparaten"
- },
- "ManagedDesktop": {
- "adminContacts": "Contactpersonen van beheerder",
- "appPackaging": "Apps verpakken",
- "autopatchGroups": "Autopatch-groepen",
- "devices": "Apparaten",
- "featureEnablement": "Functie activeren",
- "feedback": "Feedback",
- "gettingStarted": "Aan de slag",
- "messages": "Berichten",
- "onlineResources": "Onlineresources",
- "policyHealth": "Beleidsstatus",
- "policyHealthPreview": "Beleidsstatus (preview)",
- "releaseManagement": "Releasebeheer",
- "serviceRequests": "Serviceaanvragen",
- "settings": "Instellingen",
- "supportRequests": "Ondersteuningsaanvragen",
- "tenantEnrollment": "Tenantinschrijving",
- "tenantManagement": "Tenantbeheer"
- },
- "actions": "Acties voor niet-naleving",
- "advancedExchangeSettings": "Instellingen voor Exchange Online",
- "advancedThreatProtection": "Microsoft Defender for Endpoint",
- "allApps": "Alle apps",
- "allDevices": "Alle apparaten",
- "androidFotaDeployments": "Android FOTA-implementaties",
- "appBundles": "App-bundels",
- "appCategories": "App-categorieën",
- "appConfigPolicies": "App-configuratiebeleid",
- "appConfigurationStatus": "App-configuratiestatus",
- "appInstallStatus": "Installatiestatus van de app",
- "appLicences": "App-licenties",
- "appProtectionPolicies": "App-beveiligingsbeleid",
- "appProtectionStatus": "App-beveiligingsstatus",
- "appSelectiveWipe": "App selectief wissen",
- "appleVppTokens": "Apple VPP-tokens",
- "apps": "Apps",
- "assign": "Toewijzingen",
- "assignedPermissions": "Toegewezen machtigingen",
- "assignedRoles": "Toegewezen rollen",
- "autopilotDeploymentReport": "Autopilot-implementaties (preview-versie)",
- "autopilotDeploymentReportV2": "Autopilot-implementaties 2.0 (preview)",
- "brandingAndCustomization": "Aanpassen",
- "cartProfiles": "Winkelwagenprofielen",
- "certificateConnectors": "Certificaatconnectors",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Apparaten met cloudkoppeling (preview)",
- "cloudPcActions": "Cloud pc-acties (preview)",
- "cloudPcMaintenanceWindows": "Onderhoudsvensters voor cloud-pc (preview- versie)",
- "compliancePolicies": "Nalevingsbeleid",
- "complianceScriptManagement": "Scripts",
- "complianceScriptManagementPreview": "Scripts (preview)",
- "complianceSettings": "Instellingen van het nalevingsbeleid",
- "conditionStatements": "Voorwaarde-instructies",
- "conditions": "Locaties",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Configuratieprofielen",
- "configurationScripts": "Configuratiescripts",
- "connectorsAndTokens": "Connectors en tokens",
- "corporateDeviceIdentifiers": "Bedrijfsapparaat-id's",
- "customAttributes": "Aangepaste kenmerken",
- "customNotifications": "Aangepaste meldingen",
- "deploymentSettings": "Implementatie-instellingen",
- "derivedCredentials": "Afgeleide referenties",
- "deviceActions": "Apparaatacties",
- "deviceCategories": "Apparaatcategorieën",
- "deviceCleanUp": "Regels voor opschonen van apparaat",
- "deviceEnrollmentManagers": "Apparaatinschrijvingsmanagers",
- "deviceExecutionStatus": "Apparaatstatus",
- "deviceLimitEnrollmentRestrictions": "Beperkingen op registratie van apparaatlimiet",
- "deviceTypeEnrollmentRestrictions": "Beperkingen op registratie van platform",
- "devices": "Apparaten",
- "discoveredApps": "Gedetecteerde apps",
- "edgePolicies": "Beleidsregels voor Microsoft Edge",
- "embeddedSIM": "Mobiele eSIM-profielen (preview)",
- "enrollDevices": "Apparaten inschrijven",
- "enrollmentFailures": "Mislukte registraties",
- "enrollmentNotifications": "Inschrijvingsmeldingen (preview)",
- "enrollmentRestrictions": "Inschrijvingsbeperkingen",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange-serviceconnectors",
- "failuresForCumulativeQualityUpdates": "Fouten met cumulatieve kwaliteitsupdates voor Windows",
- "failuresForDriverUpdates": "Fouten bij bijwerken van Windows-stuurprogramma",
- "failuresForFeatureUpdates": "Fouten bij updates voor functies",
- "failuresForQualityUpdates": "Fouten bij versnelde updates van Windows",
- "featureFlighting": "Functieflighting",
- "featureUpdateDeployments": "Onderdelenupdates voor Windows 10 en hoger",
- "flighting": "Flighting",
- "fotaUpdate": "Geautomatiseerde firmware-update",
- "groupPolicy": "Beheersjablonen",
- "groupPolicyAnalytics": "Groepsbeleidsanalyse",
- "helpSupport": "Help en ondersteuning",
- "helpSupportReplacement": "Help en ondersteuning ({0})",
- "iOSAppProvisioning": "Inrichtingsprofielen voor iOS-app",
- "incompleteUserEnrollments": "Onvolledige gebruikersinschrijvingen",
- "iosUpdates": "Beleid voor iOS/iPadOS bijwerken",
- "legacyPcManagement": "Beheer van verouderde pc's",
- "macOSSoftwareUpdate": "Updatebeleid voor macOS",
- "macOSSoftwareUpdateAccountSummaries": "Installatiestatus voor macOS-apparaten",
- "macOSSoftwareUpdateCategorySummaries": "Samenvatting van software-updates",
- "macOSSoftwareUpdateStateSummaries": "updates",
- "managedGooglePlay": "Beheerde Google Play",
- "msfb": "Microsoft Store voor Bedrijven",
- "myPermissions": "Mijn machtigingen",
- "notifications": "Meldingen",
- "officeApps": "Office-apps",
- "officeProPlusPolicies": "Beleidsregels voor Office-apps",
- "onPremise": "On-premises",
- "onPremisesConnector": "On-premises Exchange ActiveSync-connector",
- "onPremisesDeviceAccess": "Exchange ActiveSync-apparaten",
- "onPremisesManageAccess": "On-premises toegang tot Exchange",
- "outOfDateIosDevices": "Installatiefouten voor iOS-apparaten",
- "overview": "Overzicht",
- "partnerDeviceManagement": "Apparaatbeheer partner",
- "perUpdateRingDeploymentState": "Implementatiestatus per updatering",
- "permissions": "Machtigingen",
- "platformApps": "{0} apps",
- "platformDevices": "{0} apparaten",
- "platformEnrollment": "Inschrijving {0}",
- "policies": "Beleid",
- "profiles": "Profielen",
- "properties": "Eigenschappen",
- "reports": "Rapporten",
- "retireNoncompliantDevices": "Niet-compatibele apparaten buiten gebruik stellen",
- "retireNoncompliantDevicesPreview": "Niet-compatibele apparaten buiten gebruik stellen (preview)",
- "role": "Rol",
- "scriptManagement": "Scripts",
- "securityBaselines": "Beveiligingsbasislijnen",
- "serviceToServiceConnector": "Exchange Online-connector",
- "servicenowConnector": "ServiceNow-connector",
- "shellScripts": "Shell-scripts",
- "teamViewerConnector": "TeamViewer-connector",
- "telecomeExpenseManagement": "Onkostenbeheer voor telecommunicatie",
- "tenantAdmin": "Tenantbeheerder",
- "tenantAdministration": "Tenantbeheer",
- "termsAndConditions": "Voorwaarden",
- "titles": "Titels",
- "troubleshoot": "Probleem oplossen",
- "troubleshootSupport": "probleemoplossing en ondersteuning",
- "user": "Gebruiker",
- "userExecutionStatus": "Gebruikersstatus",
- "wdacSupplementalPolicies": "Aanvullende beleidsregels S-modus",
- "win32CatalogUpdateApp": "Updates voor Enterprise App Management-apps",
- "win32CatalogUpdateAppInPreview": "Updates voor Windows-catalogus-apps (Win32) (Preview)",
- "windows10DriverUpdate": "Stuurprogramma-updates voor Windows 10 en hoger",
- "windows10QualityUpdate": "Kwaliteitsupdates voor Windows 10 en hoger",
- "windows10UpdateRings": "Ringen bijwerken voor Windows 10 en hoger",
- "windows10XPolicyFailures": "Fouten met Windows 10X-beleid",
- "windows365PartnerConnector": "Windows 365-partnerconnectors",
- "windowsDiagnosticData": "Windows-gegevens",
- "windowsEnterpriseCertificate": "Windows Enterprise-certificaat",
- "windowsManagement": "Scripts",
- "windowsSideLoadingKeys": "Windows-sleutels voor extern laden",
- "windowsSymantecCertificate": "Windows-DigiCert-certificaat",
- "windowsThreatReport": "Status van dreigingsagent"
- },
- "ScopeTypes": {
- "allDevices": "Alle apparaten",
- "allUsers": "Alle gebruikers",
- "allUsersAndDevices": "Alle gebruikers en alle apparaten",
- "selectedGroups": "Geselecteerde groepen"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search als standaard",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype voor Bedrijven",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone en iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Niet ondersteund",
+ "supportEnding": "Ondersteuning eindigt",
+ "supported": "Ondersteund"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Standaard",
- "header": "Updateprioriteit",
- "postponed": "Uitgesteld",
- "priority": "Hoge prioriteit"
- },
- "AutoUpdateSupersededApps": {
- "label": "Automatisch bijwerken",
- "sublabel": "Als vervangende app(s) door de gebruiker zijn geïnstalleerd vanuit de bedrijfsportal, moet de vervangende app worden geïnstalleerd."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Achtergrond",
- "displayText": "Inhoud downloaden in {0}",
- "foreground": "Voorgrond",
- "header": "Prioriteit van leveringsoptimalisatie"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Gebruiker toestaan de melding voor opnieuw opstarten uit te stellen",
- "countdownDialog": "Selecteer wanneer u het afteldialoogvenster voor opnieuw opstarten wilt weergeven voordat het opnieuw opstarten plaatsvindt (in minuten)",
- "durationInMinutes": "Respijtperiode voor opnieuw opstarten van apparaat (in minuten)",
- "snoozeDurationInMinutes": "De uitstelduur (in minuten) selecteren"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Tijdzone",
- "local": "Tijdzone van apparaat",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Datum en tijd",
- "deadlineTimeColumnLabel": "Installatiedeadline",
- "deadlineTimeDatePickerErrorMessage": "De geselecteerde datum moet na de beschikbare datum vallen",
- "deadlineTimeLabel": "Deadline voor app-installatie",
- "defaultTime": "Zo spoedig mogelijk",
- "infoText": "Deze toepassing is beschikbaar zodra deze is geïmplementeerd, tenzij u hieronder een beschikbaarheidstijd opgeeft. Als dit een vereiste toepassing is, kunt u de deadline voor de installatie opgeven.",
- "specificTime": "Een specifieke datum en tijd",
- "startTimeColumnLabel": "Beschikbaarheid",
- "startTimeDatePickerErrorMessage": "De geselecteerde datum moet eerder zijn dan de datum van de deadline",
- "startTimeLabel": "App-beschikbaarheid"
- },
- "restartGracePeriodHeader": "Respijtperiode voor opnieuw opstarten",
- "restartGracePeriodLabel": "Respijtperiode voor opnieuw opstarten van het apparaat",
- "summaryTitle": "Ervaring voor eindgebruikers"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "Het bestand of de map als de geselecteerde vereiste.",
- "pathToolTip": "Het volledige pad van het bestand of de map die u wilt detecteren.",
- "property": "Eigenschap",
- "valueToolTip": "Selecteer een waarde voor de vereiste die overeenkomt met de geselecteerde detectiemethode. Een vereiste voor datum en tijd moet u in de lokale tijdnotatie invoeren."
- },
- "GridColumns": {
- "pathOrScript": "Pad/script",
- "type": "Type"
- },
- "Registry": {
- "keyPath": "Sleutelpad",
- "keyPathTooltip": "Het volledige pad van de registervermelding die de waarde als vereiste bevat.",
- "operator": "Operator",
- "operatorTooltip": "Selecteer de operator voor de vergelijking.",
- "registryRequirement": "Vereiste voor registersleutel",
- "registryRequirementTooltip": "Selecteer de vergelijking van de vereiste voor de registersleutel.",
- "valueName": "Waardenaam",
- "valueNameTooltip": "De naam van de vereiste registerwaarde."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Alle aanbevolen stuurprogramma-updates automatisch goedkeuren",
+ "manual": "Stuurprogramma-updates handmatig goedkeuren en implementeren"
+ },
+ "BulkActions": {
+ "button": "Bulkacties"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Goedkeuringsmethode:"
},
- "RequirementTypeOptions": {
- "fileType": "Bestand",
- "registry": "Register",
- "script": "Script"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Booleaans",
- "dateTime": "Datum en tijd",
- "float": "Drijvende komma",
- "integer": "Geheel getal",
- "string": "Tekenreeks",
- "version": "Versie"
- },
- "duplicateName": "De scriptnaam {0} is al gebruikt. Voer een andere naam in.",
- "enforceSignatureCheck": "Controle van scripthandtekening afdwingen",
- "enforceSignatureCheckTooltip": "Selecteer Ja om op te geven dat het script is ondertekend door een vertrouwde uitgever. Hierdoor kan het script zonder waarschuwingen of prompts worden uitgevoerd. Het script wordt niet geblokkeerd en wordt uitgevoerd. Selecteer Nee (standaardwaarde) om het script met bevestiging door de eindgebruiker maar zonder handtekeningverificatie uit te voeren.",
- "loggedOnCredentials": "Dit script uitvoeren met referenties van aangemelde gebruiker",
- "loggedOnCredentialsTooltip": "Het script uitvoeren met de referenties van het aangemelde apparaat.",
- "operatorTooltip": "Selecteer de operator voor de vergelijking van vereisten.",
- "requirementMethod": "Uitvoergegevenstype selecteren",
- "requirementMethodTooltip": "Selecteer het gegevenstype dat wordt gebruikt bij het bepalen van een vereiste voor detectieovereenkomsten.",
- "scriptContent": "Scriptinhoud",
- "scriptFile": "Scriptbestand",
- "scriptFileTooltip": "Selecteer een PowerShell-script waarmee de aanwezigheid van een app op de client wordt gedetecteerd. Als de app wordt gedetecteerd, wordt met het proces van de vereist een afsluitcode met de waarde 0 geretourneerd en een tekenreekswaarde naar STDOUT geschreven.",
- "scriptName": "Scriptnaam",
- "value": "Waarde",
- "valueTooltip": "Selecteer een waarde voor de vereiste die overeenkomt met de geselecteerde detectiemethode. Een vereiste voor datum en tijd moet u in de lokale tijdnotatie invoeren."
+ "DeploymentDeferralInDays": {
+ "label": "Updates beschikbaar stellen na",
+ "units": "(dagen)",
+ "value": "{0} dagen"
+ },
+ "DriverAction": {
+ "header": "Selecteer hieronder een actie.",
+ "label": "Stuurprogramma-actie",
+ "placeholder": "Selecteer een actie"
},
- "bladeTitle": "Een vereisteregel toevoegen",
- "createRequirementHeader": "Maak een vereiste.",
- "header": "Aanvullende vereisteregels configureren",
- "label": "Aanvullende vereistenregels",
- "noRequirementsSelectedPlaceholder": "Er zijn geen vereisten opgegeven.",
- "requirementType": "Vereistetype",
- "requirementTypeTooltip": "Kies het type detectiemethode dat wordt gebruikt om te bepalen hoe een vereiste wordt gevalideerd."
- },
- "architectures": "Architectuur van besturingssysteem",
- "architecturesTooltip": "Kies de architecturen die nodig zijn voor het installeren van de app.",
- "bladeTitle": "Vereisten",
- "diskSpace": "Vereiste schijfruimte (MB)",
- "diskSpaceTooltip": "Vrije schijfruimte die nodig is op het systeemstation voor het installeren van de app.",
- "header": "Geef de vereisten op waaraan apparaten moeten voldoen voordat de app wordt geïnstalleerd:",
- "maximumTextFieldValue": "De waarde mag maximaal {0} zijn.",
- "minimumCpuSpeed": "Minimale vereiste processorsnelheid (MHz)",
- "minimumCpuSpeedTooltip": "De minimale processorsnelheid die is vereist om de app te installeren.",
- "minimumLogicalProcessors": "Minimale aantal vereiste logische processors",
- "minimumLogicalProcessorsTooltip": "Het minimale aantal logische processors dat is vereist om de app te installeren.",
- "minimumOperatingSystem": "Minimumversie van het besturingssysteem",
- "minimumOperatingSystemTooltip": "Selecteer de minimumversie van het besturingssysteem die nodig is voor het installeren van de app.",
- "minumumTextFieldValue": "De waarde moet ten minste {0} zijn.",
- "physicalMemory": "Vereiste fysieke geheugen (MB)",
- "physicalMemoryTooltip": "Fysieke geheugen (RAM) dat is vereist om de app te installeren.",
- "selectorLabel": "Vereisten",
- "validNumber": "Voer een geldig getal in"
- },
- "PolicySet": {
- "appManagement": "Toepassingsbeheer",
- "assignments": "Toewijzingen",
- "basics": "Grondbeginselen",
- "deviceEnrollment": "Apparaatinschrijving",
- "deviceManagement": "Apparaatbeheer",
- "scopeTags": "Bereiktags",
- "appConfigurationTitle": "App-configuratiebeleid",
- "appProtectionTitle": "App-beveiligingsbeleid",
- "appTitle": "Apps",
- "iOSAppProvisioningTitle": "Inrichtingsprofielen voor iOS-app",
- "deviceLimitRestrictionTitle": "Beperkingen voor apparaatlimieten",
- "deviceTypeRestrictionTitle": "Beperkingen voor apparaattypen",
- "enrollmentStatusSettingTitle": "Inschrijvingsstatuspagina's",
- "windowsAutopilotDeploymentProfileTitle": "Windows AutoPilot-implementatieprofielen",
- "deviceComplianceTitle": "Beleidsregels voor apparaatcompatibiliteit",
- "deviceConfigurationTitle": "Apparaatconfiguratieprofielen",
- "powershellScriptTitle": "PowerShell-scripts"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Inbegrepen stuurprogramma's"
+ },
+ "SelectDrivers": {
+ "header": "Selecteer stuurprogramma's die u wilt opnemen in uw bulkactie"
+ },
+ "SelectDriversToInclude": {
+ "button": "Stuurprogramma's selecteren die moeten worden opgenomen"
+ },
+ "SelectLessDrivers": {
+ "validation": "Er kunnen maximaal honderd stuurprogramma's worden geselecteerd"
+ },
+ "SelectMoreDrivers": {
+ "validation": "Er moet minstens één stuurprogramma zijn geselecteerd."
+ },
+ "SelectedDrivers": {
+ "label": "Geselecteerde stuurprogramma's"
+ },
+ "availabilityDate": "Beschikbaar maken in Windows Update",
+ "bladeTitle": "Stuurprogramma-updates Windows 10 en hoger (preview)",
+ "lastSync": "Laatste synchronisatie:",
+ "lastSyncDefaultText": "Initiële inventarisverzameling in behandeling",
+ "loadError": "Kan niet laden."
+ },
+ "DriverStatus": {
+ "approved": "Goedgekeurd",
+ "declined": "Afgewezen",
+ "export": "Aanbevolen stuurprogramma's exporteren",
+ "needsReview": "Beoordeling vereist",
+ "paused": "Onderbroken"
+ },
+ "DriversToReview": {
+ "text": "{0} ter beoordeling"
+ },
+ "Subtitle": {
+ "automatic": "Beleid voor automatische goedkeuring van stuurprogramma-updates",
+ "manual": "Beleid voor handmatige goedkeuring van stuurprogramma-updates"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Aanbevolen",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrein",
- "countryNameZA": "Zuid-Afrika",
- "countryNameJO": "Jordanië",
- "countryNameSD": "Soedan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Tsjechië",
- "countryNameLT": "Litouwen",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Oeganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hongkong SAR",
- "countryNameGH": "Ghana",
- "countryNameSA": "Saoedi-Arabië",
- "countryNamePG": "Papoea-Nieuw-Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "India",
- "countryNameHN": "Honduras",
- "countryNameRO": "Roemenië",
- "countryNameKZ": "Kazachstan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Georgië",
- "countryNameTT": "Trinidad en Tobago",
- "countryNameMP": "Noordelijke Marianen",
- "countryNameMV": "Maldiven",
- "countryNameFI": "Finland",
- "countryNameNO": "Noorwegen",
- "countryNameEE": "Estland",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Oezbekistan",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tadzjikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "Frankrijk",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italië",
- "countryNameAZ": "Azerbeidzjan",
- "countryNameKG": "Kirgizië",
- "countryNameWF": "Wallis en Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falklandeilanden",
- "countryNameGY": "Guyana",
- "countryNameSS": "Zuid-Soedan",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haïti",
- "countryNameSY": "Syrië",
- "countryNameMD": "Moldavië",
- "countryNameVC": "Saint Vincent en de Grenadines",
- "countryNameID": "Indonesië",
- "countryNameRE": "Réunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "Noord-Macedonië",
- "countryNameTG": "Togo",
- "countryNamePF": "Frans-Polynesië",
- "countryNameKY": "Kaaimaneilanden",
- "countryNameIO": "Brits Territorium in de Indische Oceaan",
- "countryNameRU": "Rusland",
- "countryNameMA": "Marokko",
- "countryNameAU": "Australië",
- "countryNameBO": "Bolivia",
- "countryNameVA": "Vaticaanstad",
- "countryNameVG": "Britse Maagdeneilanden",
- "countryNameFM": "Micronesia",
- "countryNameAQ": "Antarctica",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brazilië",
- "countryNameIS": "IJsland",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgarije",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahama's",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macau SAR",
- "countryNameRW": "Rwanda",
- "countryNameAS": "Amerikaans-Samoa",
- "countryNameBQ": "Bonaire, Sint Eustatius en Saba",
- "countryNameMF": "Saint-Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "Nieuw-Caledonië",
- "countryNameAC": "Ascension",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladesh",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Canada",
- "countryNameSH": "Sint-Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolië",
- "countryNamePA": "Panama",
- "countryNameCM": "Kameroen",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japan",
- "countryNameCY": "Cyprus",
- "countryNameCD": "Democratische Republiek Congo",
- "countryNameTN": "Tunesië",
- "countryNameTR": "Turkije",
- "countryNameWS": "Samoa",
- "countryNameSE": "Zweden",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Cambodja",
- "countryNamePL": "Polen",
- "countryNameDZ": "Algerije",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalië",
- "countryNameDM": "Dominica",
- "countryNameEG": "Egypte",
- "countryNameGF": "Frans-Guyana",
- "countryNameNZ": "Nieuw-Zeeland",
- "countryNamePS": "Palestijnse Autoriteit",
- "countryNameIL": "Israël",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Griekenland",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauritanië",
- "countryNameVI": "Amerikaanse Maagdeneilanden",
- "countryNameGQ": "Equatoriaal-Guinea",
- "countryNameMX": "Mexico",
- "countryNameDJ": "Djibouti",
- "countryNameGN": "Guinee",
- "countryNameCN": "China",
- "countryNameMZ": "Mozambique",
- "countryNameBV": "Bouveteiland",
- "countryNameNF": "Norfolkeiland",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "Zuid-Georgia en de Zuidelijke Sandwicheilanden",
- "countryNameRS": "Servië",
- "countryNameCC": "Cocoseilanden",
- "countryNameNA": "Namibië",
- "countryNameDE": "Duitsland",
- "countryNameCG": "Republiek Congo",
- "countryNameKW": "Koeweit",
- "countryNameMH": "Marshalleilanden",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarus",
- "countryNameMY": "Maleisië",
- "countryNameST": "São Tomé en Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Tsjaad",
- "countryNameCX": "Christmaseiland",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinee-Bissau",
- "countryNameUA": "Oekraïne",
- "countryNameCU": "Cuba",
- "countryNameCO": "Colombia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Kroatië",
- "countryNameSC": "Seychellen",
- "countryNameNL": "Nederland",
- "countryNameUM": "Amerikaanse ondergeschikte afgelegen eilanden",
- "countryNameIM": "Israël",
- "countryNameFJ": "Fiji",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "Verenigd Koninkrijk",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovenië",
- "countryNameAM": "Armenië",
- "countryNameAR": "Argentinië",
- "countryNamePM": "Saint-Pierre en Miquelon",
- "countryNameTF": "Territorium Franse Zuidelijke en Zuidpoolgebieden",
- "countryNameDO": "Dominicaanse Republiek",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugal",
- "countryNameCF": "Centraal-Afrikaanse Republiek",
- "countryNameBE": "België",
- "countryNameKM": "Comoren",
- "countryNameLY": "Libië",
- "countryNameIE": "Ierland",
- "countryNameKP": "Noord-Korea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slowakije",
- "countryNameTC": "Turks- en Caicoseilanden",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Jemen",
- "countryNameBA": "Bosnië en Herzegovina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chili",
- "countryNameIQ": "Irak",
- "countryNameSJ": "Spitsbergen en Jan Mayen",
- "countryNameAX": "Åland",
- "countryNameKE": "Kenia",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Faeröer",
- "countryNameBL": "Saint-Barthélemy",
- "countryNameLB": "Libanon",
- "countryNameJM": "Jamaica",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Spanje",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapore",
- "countryNameAL": "Albanië",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d’Ivoire",
- "countryNameTW": "Taiwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cookeilanden",
- "countryNameTH": "Thailand",
- "countryNameHM": "Heard- en McDonaldeilanden",
- "countryNameGD": "Grenada",
- "countryNameUS": "Verenigde Staten",
- "countryNameAT": "Oostenrijk",
- "countryNameKR": "Zuid-Korea",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Denemarken",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Ethiopië",
- "countryNameMG": "Madagascar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxemburg",
- "countryNameQA": "Qatar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Salomonseilanden",
- "countryNameAE": "Verenigde Arabische Emiraten",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua en Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Hongarije",
- "countryNameSX": "Sint-Maarten",
- "countryNameCH": "Zwitserland",
- "countryNamePN": "Pitcairneilanden",
- "countryNameGL": "Groenland",
- "countryNamePH": "Filipijnen",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts en Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Letland",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "Kan {0} niet synchroniseren",
+ "failureDescription": "Er is een fout opgetreden en de aangevraagde synchronisatie kan niet worden voltooid. Probeer het opnieuw.",
+ "pending": "{0} synchronisatie wordt uitgevoerd",
+ "pendingDescription": "De meest recente gegevens worden opgehaald. Dit proces kan enkele minuten duren.",
+ "success": "{0} synchronisatie voltooid",
+ "successDescription": "De synchronisatie met de WUfB-service is voltooid op {0}"
+ },
+ "SyncSpinner": {
+ "text": "Er wordt een synchronisatie uitgevoerd. Dit kan enkele minuten duren. Zoek naar een waarschuwing of kom over een paar minuten terug."
+ },
+ "TabName": {
+ "basics": "Basisinformatie",
+ "driverUpdateSettings": "Instellingen",
+ "otherDrivers": "Overige stuurprogramma's",
+ "properties": "Eigenschappen",
+ "recommendedDrivers": "Aanbevolen stuurprogramma's"
+ },
+ "driverAddFilter": "Filter toevoegen",
+ "driverApplicableDevices": "Toepasselijke apparaten",
+ "driverApprovalStatus": "Status",
+ "driverBulkActions": "Bulkacties",
+ "driverClass": "Stuurprogrammaklasse",
+ "driverCount": "{0} t/m {1} van {2} records weergeven",
+ "driverFilterNoneSelected": "Niets geselecteerd",
+ "driverManufacturer": "Fabrikant",
+ "driverName": "Stuurprogrammanaam",
+ "driverNameLower": "windows stuurprogramma-update implementatie",
+ "driverNameUpper": "Windows stuurprogramma-update implementatie",
+ "driverRefresh": "Vernieuwen",
+ "driverReleaseDate": "Releasedatum",
+ "driverSearch": "Zoeken",
+ "driverSearchKeyword": "Trefwoord voor zoeken invoeren",
+ "driverVersion": "Versie",
+ "firstDeploymentDate": "Eerste implementatie",
+ "infoBoxText": "Nadat er een beleid is toegewezen en gemaakt, kan het 24 uur duren voordat de inventaris is ingevuld.",
+ "textBlockText": "Selecteer uw beleidsinstellingen voor goedkeuring en implementatie. Stel een beleid in om updates automatisch of handmatig goed te keuren en te implementeren. De goedkeuringsmethode kan niet meer worden gewijzigd zodra een beleid is gemaakt, maar wijzigingen in afzonderlijke stuurprogramma-goedkeuringen en implementatiedetails zijn mogelijk zodra er een inventaris is gemaakt voor toegewezen apparaten."
+ },
+ "TACSettings": {
+ "edgeSettings": "Configuratie-instellingen voor Microsoft Edge",
+ "edgeWindowsDataProtectionSettings": "Instellingen voor gegevensbescherming van Microsoft Edge (Windows) - Preview",
+ "edgeWindowsSettings": "Instellingen voor configuratie van Microsoft Edge (Windows) - Preview",
+ "generalAppConfig": "Algemene app-configuratie",
+ "generalSettings": "Algemene configuratie-instellingen",
+ "outlookSMIMEConfig": "S/MIME-instellingen voor Outlook",
+ "outlookSettings": "Configuratie-instellingen voor Outlook",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-pl.json b/Documentation/Strings-pl.json
index ef95399..e12ce9e 100644
--- a/Documentation/Strings-pl.json
+++ b/Documentation/Strings-pl.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Konfiguracja ochrony danych"
- },
- "OrganizeMailByThread": {
- "title": "Organizuj pocztę według wątku",
- "tooltip": "Zachowanie domyślne w programie Outlook polega na przekształcaniu konwersacji pocztowych w widok wątku. Jeśli to ustawienie zostanie wyłączone, program Outlook będzie wyświetlał każdą wiadomość pojedynczo i nie będzie grupować ich według wątku."
- },
- "Sync": {
- "header": "Konfiguracja synchronizacji pól kontaktów z natywną aplikacją kontaktów"
- },
- "allowBiometricsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
- "allowBiometricsTitle": "Wymagaj informacji biometrycznych w celu uzyskania dostępu do aplikacji",
- "allowBiometricsTooltip": "Biometria (np. funkcja TouchID lub FaceID) może być wymagana, aby użytkownicy mogli otwierać aplikację na swoich urządzeniach. Gdy biometria jest wymagana, jest używana obok metod uwierzytelniania wybranych w tym profilu. To ustawienie nie powinno być włączone, gdy zostały wdrożone zasady ochrony aplikacji usługi Intune, ponieważ zasady ochrony aplikacji obejmują wymagania w zakresie dostępu przed uzyskaniem dostępu do danych zarządzanych. Włączenie obu opcji będzie skutkować wieloma monitami o dostęp przy otwieraniu aplikacji Outlook Mobile. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
- "allowCalendarNotificationsTitle": "Powiadomienia kalendarza",
- "allowCalendarNotificationsTooltip": "Zezwalaj na wyświetlanie pełnych szczegółów w powiadomieniach kalendarza, gdy ustawienie zasad ochrony aplikacji „Powiadomienia dotyczące danych organizacji” jest ustawione na wartość „Zablokuj dane organizacji”.",
- "allowDefaultAppSignatureTitle": "Domyślny podpis aplikacji",
- "allowDefaultAppSignatureTooltip": "Domyślny podpis aplikacji wskazuje, czy aplikacja będzie używać podpisu „Pobierz program Outlook dla systemu iOS” jako domyślnego podpisu podczas tworzenia wiadomości. Jeśli to ustawienie zostanie wyłączone, domyślny podpis nie będzie używany, ale użytkownicy będą mogli dodać własny podpis. Jeśli zostanie ustawiona wartość Nie skonfigurowano, domyślnie ustawienie aplikacji będzie włączone.",
- "allowExternalRecipientsMailTipTitle": "Porada dotycząca poczty dla adresatów zewnętrznych",
- "allowExternalRecipientsMailTipTooltip": "Porady dotyczące poczty dla adresatów zewnętrznych są wyświetlane, gdy nadawca dodaje adresata zewnętrznego lub grupę dystrybucji zawierającą adresatów zewnętrznych. Porada dotycząca poczty informuje nadawców, że pisana wiadomość wyjdzie poza organizację, co pomaga im w dobraniu właściwego słownictwa, stylu i zawartości. Funkcja ta jest dostępna tylko dla kont usługi Exchange Online i kont lokalnych korzystających z nowoczesnego uwierzytelniania hybrydowego. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Włączone.",
- "allowFocusedInboxTitle": "Priorytetowa skrzynka odbiorcza",
- "allowFocusedInboxTooltip": "Priorytetowa skrzynka odbiorcza dzieli skrzynkę odbiorczą na dwie karty — Priorytetowe i Inne. Najważniejsze wiadomości e-mail są widoczne na karcie Priorytetowe, a pozostałe wiadomości, chociaż usunięte z głównego widoku, są nadal łatwo dostępne na karcie Inne. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, domyślnym ustawieniem w aplikacji jest Włączone.",
- "allowMailNotificationsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
- "allowMailNotificationsTitle": "Powiadomienia pocztowe",
- "allowMailNotificationsTooltip": "Ta wartość określa, czy program Outlook będzie zezwalał na powiadomienia e-mail. Ustawienie wartości Nie powoduje wyłączenie powiadomień e-mail.",
- "allowOrgDataOnWearablesTitle": "Dane organizacji na urządzeniach do noszenia na sobie",
- "allowOrgDataOnWearablesTooltip": "Ta wartość określa, czy dane programu Outlook mogą być synchronizowane z urządzeniami do noszenia na sobie. Ustawienie wartości Nie powoduje wyłączenie synchronizacji z urządzeniami do noszenia na sobie.",
- "allowSaveContactsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie synchronizacji kontaktów.",
- "allowSaveContactsTitle": "Zapisz kontakty",
- "allowSaveContactsTooltip": "Zapisywanie kontaktów w natywnej książce adresowej urządzenia przenośnego pozwala na łączenie nowych rozmów i wiadomości SMS z istniejącymi kontaktami użytkownika w programie Outlook. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
- "allowSmartReplyTitle": "Sugerowane odpowiedzi",
- "allowSmartReplyTooltip": "Po otwarciu wiadomości program Outlook może sugerować odpowiedzi poniżej wiadomości. Jeśli wybierzesz sugerowaną odpowiedź, możesz ją edytować przed jej wysłaniem. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Włączone.",
- "allowUserChangeGeneralToolTip": "Określ, czy użytkownik może zmieniać ustawienie.",
- "allowUserChangeTitle": "Zezwalaj użytkownikowi na zmianę ustawienia",
- "blockExternalImagesAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
- "blockExternalImagesTitle": "Blokuj obrazy zewnętrzne",
- "blockExternalImagesTooltip": "Gdy blokowanie obrazów zewnętrznych jest włączone, aplikacja nie będzie pozwalać na pobieranie obrazów hostowanych w Internecie, które są osadzone w treści wiadomości. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
- "disableAddinsTitle": "Zezwalaj na dodatki",
- "disableAddinsTooltip": "Domyślnie zasady ochrony aplikacji umożliwiają użytkownikom korzystanie z dodatków innych firm, ale mogą być używane do blokowania dodatków za pomocą ustawienia „Synchronizuj dane aplikacji zarządzanych przez zasady z aplikacjami natywnymi lub dodatkami”. Skonfigurowanie tego ustawienia na wartość „Wyłączone” spowoduje zablokowanie dodatków, gdy ustawienie zasad ochrony aplikacji zostanie ustawione na wartość Dozwolone.",
- "discoverFeedTitle": "Kanał informacyjny odkrywania",
- "discoverFeedTooltip": "Kanał informacyjny odkrywania przedstawia najczęściej używane pliki pakietu Office. Domyślnie ten kanał jest włączony, gdy dla użytkownika włączono usługę Delve. W przypadku ustawienia wartości Nie skonfigurowano domyślne ustawienie aplikacji to Włączone.",
- "enableSMIMETitle": "Włączanie protokołu S/MIME",
- "enableSMIMETooltip": "Określ, czy kontrolki S/MIME są włączone podczas tworzenia wiadomości e-mail.",
- "encryptAllEmails": "Szyfruj wszystkie wiadomości e-mail",
- "encryptAllEmailsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie Szyfruj wszystkie wiadomości e-mail.",
- "encryptAllEmailsTooltip": "Określ, czy wszystkie wiadomości e-mail muszą być szyfrowane. Szyfrowanie konwertuje dane na zaszyfrowany tekst, dzięki czemu może je odczytać tylko adresat.",
- "ldapUrl": "Adres URL LDAP",
- "ldapUrlTooltip": "To jest nazwa hosta LDAP, z którego klienci mogą uzyskać publiczne klucze szyfrowania dla adresatów poczty e-mail. Wiadomości e-mail będą szyfrowane, gdy klucz będzie dostępny. Obsługiwane formaty: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
- "nativeCalendarSyncMAMOnlyTitle": "Zezwalaj na synchronizację kalendarza",
- "nativeCalendarSyncMAMOnlyTooltip": "Domyślnie zasady ochrony aplikacji umożliwiają synchronizowanie kalendarza z natywną aplikacją Kalendarz, ale można ich użyć do zablokowania dostępności synchronizacji kalendarza. To ustawienie działa niezależnie od ustawienia zasad ochrony aplikacji i umożliwia organizacjom określenie, czy synchronizacja kalendarza jest dostępna dla konta służbowego.",
- "nativeCalendarSyncTitle": "Synchronizuj kalendarze",
- "nativeCalendarSyncTooltip": "Domyślnie zasady ochrony aplikacji umożliwiają synchronizację kalendarza z natywną aplikacją Kalendarz, ale mogą służyć do blokowania dostępności synchronizacji kalendarza za pomocą ustawienia „Synchronizuj dane aplikacji zarządzanych przez zasady z aplikacjami natywnymi lub dodatkiem”. Skonfigurowanie tego ustawienia na wartość „Wyłączone” spowoduje zablokowanie synchronizacji kalendarza, gdy ustawienie zasad ochrony aplikacji ma wartość Dozwolone.",
- "playMyEmailsTitle": "Odtwarzaj moje wiadomości e-mail",
- "playMyEmailsTooltip": "Funkcja Odtwarzaj moje wiadomości e-mail nie jest domyślnie włączona w aplikacji, ale jest polecana uprawnionym użytkownikom za pośrednictwem baneru w skrzynce odbiorczej. Ustawienie na wartość Wyłączone spowoduje, że ta funkcja nie będzie polecana uprawnionym użytkownikom w aplikacji. Użytkownicy mogą ręcznie włączać funkcję Odtwarzaj moje wiadomości e-mail w aplikacji, nawet jeśli ta funkcja jest ustawiona na wartość Wyłączona. Po ustawieniu wartości Nie skonfigurowano domyślnym ustawieniem aplikacji jest Włączone i funkcja będzie polecana uprawnionym użytkownikom.",
- "signAllEmails": "Podpisuj wszystkie wiadomości e-mail",
- "signAllEmailsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie Podpisuj wszystkie wiadomości e-mail.",
- "signAllEmailsTooltip": "Określ, czy wszystkie wiadomości e-mail muszą być podpisywane. Podpis cyfrowy weryfikuje autentyczność wiadomości e-mail i zapewnia, że zawartość nie została zmodyfikowana podczas przesyłania.",
- "syncAddressTitle": "Adres",
- "syncAddressTooltip": "Ta wartość określa, czy adres kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncBirthdayTitle": "Urodziny",
- "syncBirthdayTooltip": "Ta wartość określa, czy data urodzenia kontaktu ma być synchronizowana z kontaktami natywnymi.",
- "syncCompanyTitle": "Firma",
- "syncCompanyTooltip": "Ta wartość określa, czy nazwa firmy kontaktu ma być synchronizowana z kontaktami natywnymi.",
- "syncDepartmentTitle": "Dział",
- "syncDepartmentTooltip": "Ta wartość określa, czy dział kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncEmailAddressTitle": "Adres e-mail",
- "syncEmailAddressTooltip": "Ta wartość określa, czy adres e-mail kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncInstantMessagingAddressTitle": "Adres wiadomości błyskawicznych",
- "syncInstantMessagingAddressTooltip": "Ta wartość określa, czy adres wiadomości błyskawicznych kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncJobTitleTitle": "Stanowisko",
- "syncJobTitleTooltip": "Ta wartość określa, czy stanowisko kontaktu ma być synchronizowane z kontaktami natywnymi.",
- "syncNicknameTitle": "Pseudonim",
- "syncNicknameTooltip": "Ta wartość określa, czy pseudonim kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncNotesTitle": "Notes",
- "syncNotesTooltip": "Ta wartość określa, czy uwagi dotyczące kontaktu mają być synchronizowane z kontaktami natywnymi.",
- "syncPhoneHomeFaxNumberTitle": "Numer faksu domowego",
- "syncPhoneHomeFaxNumberTooltip": "Ta wartość określa, czy numer faksu domowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncPhoneHomeNumberTitle": "Numer telefonu domowego",
- "syncPhoneHomeNumberTooltip": "Ta wartość określa, czy numer telefonu domowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncPhoneMobileNumberTitle": "Numer telefonu komórkowego",
- "syncPhoneMobileNumberTooltip": "Ta wartość określa, czy numer telefonu komórkowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncPhoneOtherNumberTitle": "Numer innego telefonu",
- "syncPhoneOtherNumberTooltip": "Ta wartość określa, czy numer innego telefonu kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncPhonePagerNumberTitle": "Numer telefonu pagera",
- "syncPhonePagerNumberTooltip": "Ta wartość określa, czy numer telefonu pagera kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncPhoneWorkFaxNumberTitle": "Numer faksu służbowego",
- "syncPhoneWorkFaxNumberTooltip": "Ta wartość określa, czy numer faksu służbowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncPhoneWorkNumberTitle": "Numer telefonu służbowego",
- "syncPhoneWorkNumberTooltip": "Ta wartość określa, czy numer telefonu służbowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncPrefixTitle": "Prefiks nazwy",
- "syncPrefixTooltip": "Ta wartość określa, czy prefiks nazwy kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "syncSuffixTitle": "Sufiks nazwy",
- "syncSuffixTooltip": "Ta wartość określa, czy sufiks nazwy kontaktu ma być synchronizowany z kontaktami natywnymi.",
- "textPredictionsTitle": "Podpowiadanie tekstu",
- "textPredictionsTooltip": "Program Outlook może sugerować wyrazy i frazy podczas redagowania wiadomości. Gdy aplikacja Outlook wyświetli sugestię, przesuń, aby ją zaakceptować. Gdy ustawienie nie jest skonfigurowane, domyślnym ustawieniem aplikacji jest Włączone.",
- "themesEnabledTitle": "Kompozycje włączone",
- "themesEnabledTooltip": "Określ, czy użytkownik może używać niestandardowego motywu wizualnego."
- },
- "Languages": {
- "ar-aE": "Arabski (Zjednoczone Emiraty Arabskie)",
- "ar-bH": "Arabski (Bahrajn)",
- "ar-dZ": "Arabski (Algieria)",
- "ar-eG": "Arabski (Egipt)",
- "ar-iQ": "Arabski (Irak)",
- "ar-jO": "Arabski (Jordania)",
- "ar-kW": "Arabski (Kuwejt)",
- "ar-lB": "Arabski (Liban)",
- "ar-lY": "Arabski (Libia)",
- "ar-mA": "Arabski (Maroko)",
- "ar-oM": "Arabski (Oman)",
- "ar-qA": "Arabski (Katar)",
- "ar-sA": "Arabski (Arabia Saudyjska)",
- "ar-sY": "Arabski (Syria)",
- "ar-tN": "Arabski (Tunezja)",
- "ar-yE": "Arabski (Jemen)",
- "az-cyrl": "Azerbejdżański (cyrylica, Azerbejdżan)",
- "az-latn": "Azerbejdżański (łaciński, Azerbejdżan)",
- "bn-bD": "Bengalski (Bangladesz)",
- "bn-iN": "Bengalski (Indie)",
- "bs-cyrl": "Bośniacki (cyrylica)",
- "bs-latn": "Bośniacki (łaciński)",
- "zh-cN": "Chiński (ChRL)",
- "zh-hK": "Chiński (SRA Hongkong)",
- "zh-mO": "Chiński (Macao S.A.R.)",
- "zh-sG": "Chiński (Singapur)",
- "zh-tW": "Chiński (Tajwan)",
- "hr-bA": "Chorwacki (łaciński)",
- "hr-hR": "Chorwacki (Chorwacja)",
- "nl-bE": "Holenderski (Belgia)",
- "nl-nL": "Holenderski (Holandia)",
- "en-aU": "Angielski (Australia)",
- "en-bZ": "Angielski (Belize)",
- "en-cA": "Angielski (Kanada)",
- "en-cabn": "Angielski (Karaiby)",
- "en-iE": "Angielski (Irlandia)",
- "en-iN": "Angielski (Indie)",
- "en-jM": "Angielski (Jamajka)",
- "en-mY": "Angielski (Malezja)",
- "en-nZ": "Angielski (Nowa Zelandia)",
- "en-pH": "Angielski (Republika Filipin)",
- "en-sG": "Angielski (Singapur)",
- "en-tT": "Angielski (Trynidad i Tobago)",
- "en-uK": "Angielski (Zjednoczone Królestwo)",
- "en-uS": "Angielski (Stany Zjednoczone)",
- "en-zA": "Angielski (Republika Południowej Afryki)",
- "en-zW": "Angielski (Zimbabwe)",
- "fr-bE": "Francuski (Belgia)",
- "fr-cA": "Francuski (Kanada)",
- "fr-cH": "Francuski (Szwajcaria)",
- "fr-fR": "Francuski (Francja)",
- "fr-lU": "Francuski (Luksemburg)",
- "fr-mC": "Francuski (Monako)",
- "de-aT": "Niemiecki (Austria)",
- "de-cH": "Niemiecki (Szwajcaria)",
- "de-dE": "Niemiecki (Niemcy)",
- "de-lI": "Niemiecki (Liechtenstein)",
- "de-lU": "Niemiecki (Luksemburg)",
- "iu-cans": "Inuktitut (sylabiczny, Kanada)",
- "iu-latn": "Inuktitut (łaciński, Kanada)",
- "it-cH": "Włoski (Szwajcaria)",
- "it-iT": "Włoski (Włochy)",
- "ms-bN": "Malajski (Brunei Darussalam)",
- "ms-mY": "Malajski (Malezja)",
- "mn-cN": "Mongolski (mongolski tradycyjny, ChRL)",
- "mn-mN": "Mongolski (cyrylica, Mongolia)",
- "no-nB": "Norweski, Bokmål (Norwegia)",
- "no-nn": "Norweski, Nynorsk (Norwegia)",
- "pt-bR": "Portugalski (Brazylia)",
- "pt-pT": "Portugalski (Portugalia)",
- "quz-bO": "Keczua (Boliwia)",
- "quz-eC": "Keczua (Ekwador)",
- "quz-pE": "Keczua (Peru)",
- "smj-nO": "Lapoński, Lule (Norwegia)",
- "smj-sE": "Lapoński, Lule (Szwecja)",
- "se-fI": "Lapoński, północny (Finlandia)",
- "se-nO": "Lapoński, północny (Norwegia)",
- "se-sE": "Lapoński, północny (Szwecja)",
- "sma-nO": "Lapoński, południowy (Norwegia)",
- "sma-sE": "Lapoński, południowy (Szwecja)",
- "smn": "Lapoński, Inari (Finlandia)",
- "sms": "Lapoński, Skolt (Finlandia)",
- "sr-Cyrl-bA": "Serbski (cyrylica)",
- "sr-Cyrl-rS": "Serbski (cyrylica, Serbia i Czarnogóra [dawniej])",
- "sr-Latn-bA": "Serbski (łaciński)",
- "sr-Latn-rS": "Serbski (łaciński, Serbia)",
- "dsb": "Dolnołużycki (Niemcy)",
- "hsb": "Górnołużycki (Niemcy)",
- "es-es-tradnl": "Hiszpański (Hiszpania, sortowanie tradycyjne)",
- "es-aR": "Hiszpański (Argentyna)",
- "es-bO": "Hiszpański (Boliwia)",
- "es-cL": "Hiszpański (Chile)",
- "es-cO": "Hiszpański (Kolumbia)",
- "es-cR": "Hiszpański (Kostaryka)",
- "es-dO": "Hiszpański (Dominikana)",
- "es-eC": "Hiszpański (Ekwador)",
- "es-eS": "Hiszpański (Hiszpania)",
- "es-gT": "Hiszpański (Gwatemala)",
- "es-hN": "Hiszpański (Honduras)",
- "es-mX": "Hiszpański (Meksyk)",
- "es-nI": "Hiszpański (Nikaragua)",
- "es-pA": "Hiszpański (Panama)",
- "es-pE": "Hiszpański (Peru)",
- "es-pR": "Hiszpański (Portoryko)",
- "es-pY": "Hiszpański (Paragwaj)",
- "es-sV": "Hiszpański (Salwador)",
- "es-uS": "Hiszpański (Stany Zjednoczone)",
- "es-uY": "Hiszpański (Urugwaj)",
- "es-vE": "Hiszpański (Wenezuela)",
- "sv-fI": "Szwedzki (Finlandia)",
- "uz-cyrl": "Uzbecki (cyrylica, Uzbekistan)",
- "uz-latn": "Uzbecki (łaciński, Uzbekistan)",
- "af": "Afrykanerski (Republika Południowej Afryki)",
- "sq": "Albański (Albania)",
- "am": "Amharyjski (Etiopia)",
- "hy": "Armeński (Armenia)",
- "as": "Assamski (Indie)",
- "ba": "Baszkirski (Rosja)",
- "eu": "Baskijski (Baskijski)",
- "be": "Białoruski (Białoruś)",
- "br": "Bretoński (Francja)",
- "bg": "Bułgarski (Bułgaria)",
- "ca": "Kataloński (Kataloński)",
- "co": "Korsykański (Francja)",
- "cs": "Czeski (Czechy)",
- "da": "Duński (Dania)",
- "dv": "Divehi (Malediwy)",
- "et": "Estoński (Estonia)",
- "fo": "Farerski (Wyspy Owcze)",
- "fil": "Filipino (Filipiny)",
- "fi": "Fiński (Finlandia)",
- "gl": "Galicyjski (Galicia)",
- "ka": "Gruziński (Gruzja)",
- "el": "Grecki (Grecja)",
- "gu": "Gudżarati (Indie)",
- "ha": "Hausa (łaciński, Nigeria)",
- "he": "Hebrajski (Izrael)",
- "hi": "Hindi (Indie)",
- "hu": "Węgierski (Węgry)",
- "is": "Islandzki (Islandia)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonezyjski (Indonezja)",
- "ga": "Irlandzki (Irlandia)",
- "xh": "isiXhosa (Republika Południowej Afryki)",
- "zu": "isiZulu (Republika Południowej Afryki)",
- "ja": "Japoński (Japonia)",
- "kn": "Kannada (Indie)",
- "kk": "Kazachski (Kazachstan)",
- "km": "Khmerski (Kambodża)",
- "rw": "Kinjarwanda (Rwanda)",
- "sw": "Suahili (Kenia)",
- "kok": "Konkani (Indie)",
- "ko": "Koreański (Korea Południowa)",
- "ky": "Kirgiski (Kirgistan)",
- "lo": "Laotański (Laotańska RLD)",
- "lv": "Łotewski (Łotwa)",
- "lt": "Litewski (Litwa)",
- "lb": "Luksemburski (Luksemburg)",
- "mk": "Macedoński (Macedonia Północna)",
- "ml": "Malajalam (Indie)",
- "mt": "Maltański (Malta)",
- "mi": "Maoryjski (Nowa Zelandia)",
- "mr": "Marathi (Indie)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepalski (Nepal)",
- "oc": "Okcytański (Francja)",
- "or": "Orija (Indie)",
- "ps": "Paszto (Afganistan)",
- "fa": "Perski",
- "pl": "Polski (Polska)",
- "pa": "Pendżabski (Indie)",
- "ro": "Rumuński (Rumunia)",
- "rm": "Romansz (retoromański, Szwajcaria)",
- "ru": "Rosyjski (Rosja)",
- "sa": "Sanskryt (Indie)",
- "st": "Sesotho północny (Republika Południowej Afryki)",
- "tn": "Setswana (Republika Południowej Afryki)",
- "si": "Sinhala (Sri Lanka)",
- "sk": "Słowacki (Słowacja)",
- "sl": "Słoweński (Słowenia)",
- "sv": "Szwedzki (Szwecja)",
- "syr": "Syryjski (Syria)",
- "tg": "Tadżycki (cyrylica, Tadżykistan)",
- "ta": "Tamilski (Indie)",
- "tt": "Tatarski (Rosja)",
- "te": "Telugu (Indie)",
- "th": "Tajski (Tajlandia)",
- "bo": "Tybetański (ChRL)",
- "tr": "Turecki (Turcja)",
- "tk": "Turkmeński (Turkmenistan)",
- "uk": "Ukraiński (Ukraina)",
- "ur": "Urdu (Islamska Republika Pakistanu)",
- "vi": "Wietnamski (Wietnam)",
- "cy": "Walijski (Zjednoczone Królestwo)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (ChRL)",
- "yo": "Joruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender dla punktu końcowego",
- "androidDeviceOwnerApplications": "Aplikacje",
- "androidDeviceOwnerPolicyMessages": "Niestandardowe informacje o pomocy technicznej",
- "androidForWorkPassword": "Hasło urządzenia",
- "appManagement": "Zezwalaj na aplikacje lub blokuj je",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Aplikacje z ograniczeniami",
- "applicationVisibility": "Pokaż lub ukryj aplikacje",
- "applications": "App Store",
- "applicationsAndGames": "Sklep App Store, wyświetlanie dokumentów, granie",
- "applicationsAndGoogle": "Sklep Google Play",
- "appsAndExperience": "Aplikacje i środowisko",
- "associatedDomains": "Skojarzone domeny",
- "autonomousSingleAppMode": "Autonomiczny tryb pojedynczej aplikacji",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Szyfrowanie systemu Windows",
- "bootOptions": "Opcje rozruchu",
- "browser": "Przeglądarka",
- "builtinApps": "Aplikacje wbudowane",
- "cameras": "Kamery",
- "cellular": "Sieć komórkowa",
- "cloudAndStorage": "Chmura i magazyn",
- "cloudPrint": "Drukarka w chmurze",
- "complianceEmailProfile": "Wiadomość e-mail",
- "connectedDevices": "Podłączone urządzenia",
- "connectivity": "Sieć komórkowa i łączność",
- "contentCaching": "Buforowanie zawartości",
- "controlPanelAndSettings": "Panel sterowania i Ustawienia",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Zgodność niestandardowa",
- "customConfiguration": "Niestandardowy profil konfiguracji",
- "customOMASettings": "Niestandardowe ustawienia OMA-URI",
- "customPreferences": "Plik preferencji",
- "dFCISecuritySettings": "Ustawienia zabezpieczeń",
- "defender": "Program antywirusowy Microsoft Defender",
- "defenderAntivirus": "Program antywirusowy Microsoft Defender",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Zapora systemu Windows",
- "defenderLocalSecurityOptions": "Opcje zabezpieczeń urządzenia lokalnego",
- "defenderSecurityCenter": "Centrum zabezpieczeń usługi Microsoft Defender",
- "deliveryOptimization": "Optymalizacja dostarczania",
- "derivedCredentialAuthenticationConfiguration": "Pochodne poświadczenia",
- "deviceExperience": "Środowisko urządzenia",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Kontrola aplikacji usługi Microsoft Defender",
- "deviceHealth": "Kondycja urządzenia",
- "devicePassword": "Hasło urządzenia",
- "deviceProperties": "Właściwości urządzenia",
- "deviceRestrictions": "Ogólne",
- "deviceSecurity": "Zabezpieczenia systemu",
- "display": "Wyświetl",
- "domainJoin": "Przyłączanie do domeny",
- "domains": "Domeny",
- "edgeBrowser": "Starsze wersje przeglądarki Microsoft Edge (wersja 45 i wcześniejsze)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Tryb kiosku przeglądarki Microsoft Edge",
- "editionUpgrade": "Uaktualnianie wersji",
- "education": "Edukacja",
- "educationDeviceCerts": "Certyfikaty urządzeń",
- "educationStudentCerts": "Certyfikaty uczniów",
- "educationTakeATest": "Wypełnij test",
- "educationTeacherCerts": "Certyfikaty nauczycieli",
- "emailProfile": "Wiadomość e-mail",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Rozszerzenie aplikacji do logowania jednokrotnego",
- "filevault": "FileVault",
- "firewall": "Zapora",
- "games": "Gry",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Monitorowanie kondycji",
- "homeScreenLayout": "Układ ekranu startowego",
- "iOSWallpaper": "Tapeta",
- "importedPFX": "Zaimportowany certyfikat PKCS",
- "iosDefenderAtp": "Microsoft Defender dla punktu końcowego",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Rozszerzenia jądra",
- "keyboardAndDictionary": "Klawiatura i słownik",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Dedykowane urządzenia",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Przeglądarka internetowa kiosku",
- "lockScreenMessage": "Komunikat na ekranie blokady",
- "lockedScreenExperience": "Środowisko ekranu blokady",
- "logging": "Raportowanie i telemetria",
- "loginItems": "Elementy logowania",
- "loginWindow": "Okno logowania",
- "macDefenderAtp": "Microsoft Defender dla punktu końcowego",
- "maintenance": "Konserwacja",
- "malware": "Złośliwe oprogramowanie",
- "messaging": "Obsługa komunikatów",
- "microphonesAndSpeakers": "Mikrofon i głośniki",
- "networkBoundary": "Granica sieci",
- "networkProxy": "Serwer proxy sieci",
- "notifications": "Powiadomienia aplikacji",
- "pKCS": "Certyfikat PKCS",
- "password": "Hasło",
- "personalProfile": "Profil osobisty",
- "personalization": "Personalizacja",
- "policyOverride": "Przesłoń zasady grupy",
- "ports": "Porty",
- "powerSettings": "Ustawienia zasilania",
- "printer": "Drukarka",
- "privacy": "Prywatność",
- "privacyPerApp": "Wyjątki prywatności dla aplikacji",
- "privacyPreferences": "Preferencje dotyczące prywatności",
- "projection": "Projekcja",
- "radios": "Radia",
- "sCCMCompliance": "Zgodność z programem Configuration Manager",
- "sCEP": "Certyfikat SCEP",
- "sCEPProperties": "Certyfikat SCEP",
- "sMode": "Przełączenie trybu (tylko niejawny program testów systemu Windows)",
- "safari": "Safari",
- "search": "Wyszukaj",
- "session": "Sesja",
- "sharedDevice": "Udostępnione urządzenie iPad",
- "sharedPCAccountManager": "Udostępnione urządzenie obsługujące wielu użytkowników",
- "singleSignOn": "Logowanie jednokrotne",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Ustawienia",
- "start": "Rozpoczęcie",
- "systemExtensions": "Rozszerzenia systemu",
- "systemSecurity": "Zabezpieczenia systemu",
- "trustedCert": "Certyfikat zaufany",
- "uEFIAccess": "Dostęp do interfejsu UEFI",
- "updates": "Aktualizacje",
- "userRights": "Prawa użytkownika",
- "usersAndAccounts": "Użytkownicy i konta",
- "vPN": "Podstawowa sieć VPN",
- "vPNApps": "Automatyczne połączenie VPN",
- "vPNAppsAndTrafficRules": "Reguły dotyczące aplikacji i ruchu",
- "vPNConditionalAccess": "Dostęp warunkowy",
- "vPNConnectivity": "Łączność",
- "vPNDNSTriggers": "Ustawienia DNS",
- "vPNIKEv2": "Ustawienia IKEv2",
- "vPNProxy": "Serwer proxy",
- "vPNSplitTunneling": "Tunelowanie podzielone",
- "vPNTrustedNetwork": "Wykrywanie zaufanych sieci",
- "wakeSettings": "Ustawienia wznawiania",
- "webContentFilter": "Filtr zawartości internetowej",
- "wiFi": "Sieć Wi-Fi",
- "win10Wifi": "Sieć Wi-Fi",
- "windowsAtp": "Microsoft Defender dla punktu końcowego",
- "windowsDefenderATP": "Microsoft Defender dla punktu końcowego",
- "windowsHelloForBusiness": "Windows Hello dla firm",
- "windowsSpotlight": "W centrum uwagi Windows",
- "wiredNetwork": "Sieć przewodowa",
- "wireless": "Bezprzewodowe",
- "wirelessProjection": "Projekcja bezprzewodowa",
- "workProfile": "Ustawienia profilu służbowego",
- "workProfilePassword": "Hasło profilu służbowego",
- "xboxServices": "Usługi Xbox",
- "zebraMx": "Profil MX (tylko Zebra)",
- "complianceActionsLabel": "Akcje w przypadku niezgodności"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Opis"
- },
- "FeatureDeploymentSettings": {
- "header": "Ustawienia wdrażania funkcji"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Ta funkcja nie może zmienić wersji urządzenia na starszą.",
- "label": "Aktualizacja funkcji do wdrożenia"
- },
- "GradualRolloutEndDate": {
- "label": "Ostateczna dostępność grupy"
- },
- "GradualRolloutInterval": {
- "label": "Dni między grupami"
- },
- "GradualRolloutStartDate": {
- "label": "Dostępność pierwszej grupy"
- },
- "Name": {
- "label": "Nazwa"
- },
- "OptionalUpdate": {
- "label": "Aktualizacja wymagana lub opcjonalna"
- },
- "RolloutOptions": {
- "label": "Opcje wprowadzania"
- },
- "RolloutSettings": {
- "header": "Kiedy chcesz udostępnić aktualizację w usłudze Windows Update?"
- },
- "ScopeSettings": {
- "header": "Konfiguruj tagi zakresu dla tych zasad."
- },
- "StartDateOnlyStartDate": {
- "label": "Pierwsza dostępna data"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Wyłączono",
- "enabled": "Włączono",
- "infoBalloonContent": "Określ, czy zainstalować najnowszą aktualizację funkcji systemu Windows 10 na urządzeniach, które nie kwalifikują się do instalacji systemu Windows 11",
- "label": "Jeśli urządzenie nie kwalifikuje się do uruchomienia systemu Windows 11, zainstaluj najnowszą aktualizację funkcji systemu Windows 10",
- "notApplicable": "Nie dotyczy",
- "summaryLabel": "Instalowanie systemu Windows 10 na urządzeniach, które nie kwalifikują się do uruchomienia systemu Windows 11"
- },
- "bladeTitle": "Wdrożenia aktualizacji funkcji",
- "deploymentSettingsTitle": "Ustawienia wdrożenia",
- "loadError": "Ładowanie nie powiodło się!",
- "windows11EULA": "Zaznaczając tę opcję aktualizacji funkcji do wdrożenia, wyrażasz zgodę na to, że podczas stosowania tego systemu operacyjnego na urządzeniu (1) zakupiono odpowiednią licencję systemu Windows w ramach licencjonowania zbiorowego lub (2) że masz upoważnienie do nabywania praw i zaciągania zobowiązań w imieniu swojej organizacji i akceptujesz w jej imieniu odpowiednie postanowienia licencyjne dotyczące oprogramowania firmy Microsoft, które można znaleźć tutaj {0}."
- },
- "Notifications": {
- "deploymentSaved": "Zapisano „{0}”.",
- "newFeatureUpdateDeploymentCreated": "Utworzono nowe wdrożenie aktualizacji funkcji."
- },
- "TabName": {
- "deploymentSettings": "Ustawienia wdrożenia",
- "groupAssignmentSettings": "Przypisania",
- "scopeSettings": "Tagi zakresu"
- },
- "gradualRolloutLicenseWarning": "Ta możliwość wymaga określonego licencjonowania.",
- "gradualRolloutLicenseWarningEdit": "Ta możliwość może być nadal używana i konfigurowana do czasu zapisania zasad bez wybrania tej możliwości.",
- "licenseLearnMoreText": "Dowiedz się więcej o wymaganiach wstępnych i zasadach aktualizacji funkcji.",
- "optionalUpdateWarning": "Opcjonalna jest dostępna tylko dla aktualizacji systemu Windows 11",
- "profileNameWarning": "Nazwa powinna mieć mniej niż 64 znaków",
- "specificLicensingRequired": "Niektóre wybrane możliwości wymagają określonego licencjonowania."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Zezwalaj na użycie małych liter w kodzie PIN",
- "notAllow": "Nie zezwalaj na użycie małych liter w kodzie PIN",
- "requireAtLeastOne": "Wymagaj użycia co najmniej jednej małej litery w kodzie PIN"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Zezwalaj na użycie znaków specjalnych w kodzie PIN",
- "notAllow": "Nie zezwalaj na użycie znaków specjalnych w kodzie PIN",
- "requireAtLeastOne": "Wymagaj użycia co najmniej jednego znaku specjalnego w kodzie PIN"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Zezwalaj na użycie wielkich liter w kodzie PIN",
- "notAllow": "Nie zezwalaj na użycie wielkich liter w kodzie PIN",
- "requireAtLeastOne": "Wymagaj użycia co najmniej jednej wielkiej litery w kodzie PIN"
- }
+ "InstallContextType": {
+ "device": "Urządzenie",
+ "deviceContext": "Kontekst urządzenia",
+ "user": "Użytkownik",
+ "userContext": "Kontekst użytkownika"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "Wersja aplikacji",
- "dependencyName": "Nazwa zależności",
- "lastModifiedTime": "Czas ostatniej modyfikacji",
- "relationship": "Relacja",
- "replaced": "Zastąpiono",
- "searchPlaceholder": "Filtruj według nazwy aplikacji",
- "status": "Szczegóły stanu",
- "statusDetails": "Stan",
- "supersedenceName": "Nazwa zastępowania"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Zależność podrzędna",
- "indirectSupersedence": "Niezwiązane bezpośrednio",
- "supersedenceAncestors": "Zastępujący",
- "supersedenceDescendants": "Zastąpione"
- },
- "SupersededReplaced": {
- "no": "Nie",
- "yes": "Tak"
- },
- "Tabs": {
- "chart": "Wykres",
- "dependency": "Zależność",
- "label": "Widok: ",
- "supersedence": "Zastępowanie",
- "table": "Tabela"
- },
- "dependencyGraphAriaLabel": "Wykres zależności aplikacji",
- "supersedenceGraphAriaLabel": "Wykres zastępowania aplikacji"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Wybierz skrypt odnajdywania",
- "scriptFileLabel": "Wybierz swój skrypt odnajdywania"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Jeśli ta opcja jest włączona, urządzenia muszą być zgodne zgodnie z regułami niestandardowymi zdefiniowanymi w pliku JSON na podstawie danych niestandardowych zwróconych przez skrypt odnajdywania programu PowerShell.",
- "label": "Zgodność niestandardowa jest obecnie oferowana w wersji zapoznawczej. Gdy stanie się ogólnie dostępna, będzie można dodać ją za dodatkową opłatą do opcji licencjonowania obejmujących usługę Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Skrypt",
- "placeholder": "Kliknij, aby wybrać",
- "searchboxPlaceholder": "Wyszukaj według nazwy skryptu",
- "title": "Wybierz skrypt odnajdywania"
- },
- "SummaryGrid": {
- "ariaLabel": "Podsumowanie reguł zgodności niestandardowej"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "Jedna akcja blokowania jest wymagana dla wszystkich zasad zgodności.",
+ "graceperiod": "Harmonogram (dni po stwierdzeniu niezgodności)",
+ "graceperiodInfo": "Określ liczbę dni po stwierdzeniu niezgodności, po których ta akcja powinna być wyzwolona wobec urządzenia użytkownika",
+ "subtitle": "Określ parametry akcji",
+ "title": "Parametry akcji"
+ },
+ "List": {
+ "gracePeriodDay": "{0} dzień po stwierdzeniu niezgodności",
+ "gracePeriodDays": "{0} dni po stwierdzeniu niezgodności",
+ "gracePeriodHour": "{0} godz. po stwierdzeniu niezgodności",
+ "gracePeriodHours": "{0} godz. po stwierdzeniu niezgodności",
+ "gracePeriodMinute": "{0} min po stwierdzeniu niezgodności",
+ "gracePeriodMinutes": "{0} min po stwierdzeniu niezgodności",
+ "immediately": "Natychmiast",
+ "schedule": "Harmonogram",
+ "scheduleInfoBalloon": "Liczba dni po niezgodności",
+ "subtitle": "Określ sekwencję akcji wykonywanych wobec niezgodnych urządzeń",
+ "title": "Akcje"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Inne",
+ "additionalRecipients": "Dodatkowi odbiorcy (za pośrednictwem poczty e-mail)",
+ "additionalRecipientsBladeTitle": "Wybierz dodatkowych adresatów",
+ "emailAddressPrompt": "Podaj adresy e-mail (rozdzielone przecinkami)",
+ "invalidEmail": "Nieprawidłowy adres e-mail",
+ "messageTemplate": "Szablon wiadomości",
+ "noneSelected": "Nie wybrano niczego",
+ "notSelected": "Nie wybrano",
+ "numSelected": "wybrano: {0}",
+ "selected": "Wybrano"
},
- "UploadFile": {
- "jsonFileLabel": "Przekaż i zweryfikuj plik JSON przy użyciu niestandardowych ustawień zgodności",
- "noFileSelectedError": "Wybierz plik json",
- "parseFileSelectedError": "Plik json jest nieprawidłowy"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filtruj",
- "noFilters": "Brak"
- },
- "Platform": {
- "all": "Wszystkie",
- "android": "Administrator urządzeń z systemem Android",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "System Android dla firm",
- "common": "Wspólne",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS i Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Nieznany",
- "unsupported": "Nieobsługiwane",
- "windows": "Windows",
- "windows10": "Windows 10 i nowsze",
- "windows10CM": "Windows 10 i nowsze (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 i nowsze",
- "windows8And10": "Windows 8 i 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 i nowsze",
- "windows10AndWindowsServer": "Windows 10, Windows 11 i Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 i nowsze (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Komputer z systemem Windows"
- },
+ "block": "Oznacz urządzenie jako niezgodne",
+ "lockDevice": "Zablokuj urządzenie (akcja lokalna)",
+ "lockDeviceWithPasscode": "Zablokuj urządzenie (akcja lokalna)",
+ "noAction": "Brak akcji",
+ "noActionRow": "Brak akcji, wybierz opcję „Dodaj”, aby dodać akcję",
+ "pushNotification": "Wyślij powiadomienie push do użytkownika końcowego",
+ "remoteLock": "Zdalne zablokowanie niezgodnego urządzenia",
+ "removeSourceAccessProfile": "Usuń źródłowy profil dostępu",
+ "retire": "Dodaj urządzenie, aby wycofać listę",
+ "wipe": "Wyczyść",
+ "emailNotification": "Wyślij wiadomość e-mail do użytkownika końcowego"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Grupy administratorów",
+ "RoleAssignmentAdminDesc": "Użytkownicy należący do grupy administratorów są administratorami przypisanymi do tej roli",
+ "rolesMenuTitle": "Role usługi Endpoint Manager",
+ "RoleAssignmentScopeDesc": "Administratorzy w ramach tego przypisania roli mogą określać zasady, aplikacje i zadania zdalne jako elementy docelowe",
+ "RoleAssignmentScope": "Grupy zakresu"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "Informacje o aplikacji",
"nameForOfficeSuitApp": "Informacje o pakiecie aplikacji"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "W systemie Android możesz używać identyfikacji za pomocą odcisków palców zamiast numeru PIN. Użytkownicy widzą monit o przedstawienie odcisków palców w przypadku uzyskiwania dostępu do tej aplikacji z konta służbowego.",
- "iOS": "W przypadku urządzeń z systemem iOS/iPadOS można zezwolić na identyfikację przy użyciu odcisku palca zamiast numeru PIN. Użytkownicy są proszeni o identyfikację za pomocą odcisku palca podczas otwierania tej aplikacji przy użyciu konta służbowego.",
- "mac": "W przypadku urządzeń z systemem Mac można zezwolić na identyfikację przy użyciu odcisku palca zamiast numeru PIN. Użytkownicy są proszeni o identyfikację za pomocą odcisku palca podczas otwierania tej aplikacji przy użyciu konta służbowego."
- },
- "allowWidgetContentSync": "Wybierz opcję Blokuj, aby uniemożliwić aplikacjom zarządzanym przez zasady zapisywanie danych w widżetach aplikacji. Jeśli wybierzesz opcję Zezwalaj, aplikacja zarządzana przez zasady będzie mogła zapisywać dane w widżetach aplikacji, jeśli te funkcje są obsługiwane i włączone w aplikacji zarządzanej przez zasady. \r\n\r\n \r\n\r\nAplikacje mogą zapewniać dodatkowe możliwości konfiguracji za pomocą zasad konfigurowania aplikacji. Aby uzyskać więcej informacji, zobacz dokumentację aplikacji.",
- "appSharingFromLevel1": "Wybierz jedną z następujących opcji, aby określić aplikacje, z których ta aplikacja może odbierać dane:",
- "appSharingFromLevel2": "{0}: zezwalaj na odbieranie danych w ramach kont lub dokumentów organizacji tylko z innych aplikacji zarządzanych przez zasady",
- "appSharingFromLevel3": "{0}: zezwalaj na odbieranie danych w ramach kont lub dokumentów organizacji z dowolnej aplikacji",
- "appSharingFromLevel4": "{0}: nie zezwalaj na odbieranie danych w ramach kont lub dokumentów organizacji z żadnej aplikacji",
- "appSharingFromLevel5": "{0}: Zezwalaj na transfer danych z dowolnej aplikacji i traktuj wszystkie dane przychodzące bez tożsamości użytkownika jak dane organizacji.",
- "appSharingToLevel1": "Wybierz jedną z następujących opcji, aby określić aplikacje, do których ta aplikacja może wysyłać dane:",
- "appSharingToLevel2": "{0}: zezwalaj na wysyłanie danych organizacji tylko do innych aplikacji zarządzanych przez zasady",
- "appSharingToLevel3": "{0}: zezwalaj na wysyłanie danych organizacji do dowolnej aplikacji",
- "appSharingToLevel4": "{0}: nie zezwalaj na wysyłanie danych organizacji do żadnej aplikacji",
- "appSharingToLevel5": "{0}: Zezwalaj na transfer tylko do innych aplikacji zarządzanych przez zasady i transfer plików do innych aplikacji zarządzanych za pomocą funkcji MDM na zarejestrowanych urządzeniach",
- "appSharingToLevel6": "{0}: Zezwalaj na transfer tylko do innych aplikacji zarządzanych przez zasady i filtruj okna dialogowe systemu operacyjnego do otwierania/udostępniania, aby były wyświetlane tylko aplikacje zarządzane przez zasady",
- "assignmentFilterEdit1": "Jeśli zastosujesz filtry przypisania do tych zasad, właściwość „Typ zarządzania urządzeniami” będzie stosowana oprócz wartości określonych dla wartości „Miejsce docelowe dla aplikacji w przypadku wszystkich typów urządzeń” i „Typy urządzeń” na stronie „Aplikacje”.",
- "assignmentFilterEdit2": "Dowiedz się więcej o przypisywaniu zasad ochrony aplikacji.",
- "conditionalEncryption1": "Wybierz opcję {0}, aby wyłączyć szyfrowanie aplikacji obejmujące wewnętrzny magazyn aplikacji, jeśli na zarejestrowanym urządzeniu zostanie wykryte szyfrowanie urządzenia.",
- "conditionalEncryption2": "Uwaga: Usługa Intune wykrywa tylko rejestrację urządzenia przy użyciu zarządzania urządzeniami przenośnymi usługi Intune. Zewnętrzny magazyn aplikacji wciąż będzie szyfrowany, aby uniemożliwić niezarządzanym aplikacjom dostęp do danych.",
- "contactSyncMac": "Jeśli ta opcja jest wyłączona, aplikacje nie mogą zapisywać kontaktów w natywnej książce adresowej.",
- "contactsSync": "Wybierz pozycję Blokuj, aby uniemożliwić aplikacjom zarządzanym przez zasady zapisywanie danych w natywnych aplikacjach urządzenia (takich jak Kontakty, Kalendarz i widżety) albo zapobiec używaniu dodatków w aplikacjach zarządzanych przez zasady. Jeśli wybierzesz pozycję Zezwalaj na, aplikacja zarządzana przez zasady będzie mogła zapisywać dane w aplikacjach natywnych lub używać dodatków, jeśli te funkcje są obsługiwane i włączone w ramach aplikacji zarządzanej przez zasady.
Aplikacje mogą udostępniać dodatkowe możliwości konfiguracji za pomocą zasad konfiguracji aplikacji. Aby uzyskać więcej informacji, zobacz dokumentację aplikacji.",
- "deviceTypeTargetingCreate1": "Określanie docelowych typów urządzenia jest przeniesione do kroku Przypisania podczas tworzenia zasad.",
- "deviceTypeTargetingEdit1": "Jeśli zastosujesz filtry przypisania do tych zasad, właściwość „Typ zarządzania urządzeniami” będzie stosowana oprócz wartości określonych dla wartości „Miejsce docelowe dla aplikacji w przypadku wszystkich typów urządzeń” i „Typy urządzeń” na stronie „Aplikacje”.",
- "deviceTypeTargetingEdit2": "Aby edytować określanie docelowych typów zarządzania urządzeniami, zresetuj właściwość „Miejsce docelowe dla aplikacji w przypadku wszystkich typów urządzeń” = „Tak”. Następnie utwórz filtr przypisania zarządzania aplikacjami mobilnymi z żądanymi wartościami dla właściwości „Typ zarządzania urządzeniami”.",
- "deviceTypeTargetingHasMoved": "Dowiedz się więcej o przypisywaniu zasad ochrony aplikacji",
- "encryptionAndroid1": "W przypadku aplikacji skojarzonych z zasadami zarządzania aplikacjami mobilnymi usługi Intune szyfrowanie jest zapewniane przez firmę Microsoft. Dane są szyfrowane synchronicznie podczas operacji we/wy na plikach zgodnie z ustawieniem w zasadach zarządzania aplikacjami mobilnymi. W zarządzanych aplikacjach w systemie Android stosowane jest szyfrowanie AES-128 w trybie CBC przy użyciu bibliotek kryptograficznych platformy. Ta metoda szyfrowania nie jest zgodna ze standardem FIPS 140-2. Szyfrowanie SHA-256 jest obsługiwane jako jawna instrukcja przy użyciu parametru SigAlg i działa tylko w przypadku urządzeń z systemem w wersji 4.2 lub nowszej. Zawartość w pamięci masowej urządzenia jest zawsze szyfrowana.",
- "encryptionAndroid2": "Gdy w zasadach aplikacji wymagane jest szyfrowanie, wymagane jest skonfigurowanie numeru PIN i uzyskiwanie dostępu do urządzenia za jago pomocą. Jeśli nie skonfigurowano numeru PIN do uzyskiwania dostępu do urządzenia, aplikacje nie zostaną uruchomione, a zamiast tego zostanie wyświetlony komunikat „Firma wymaga włączenia numeru PIN urządzenia w celu uzyskania dostępu do tej aplikacji”.",
- "encryptionMac1": "W przypadku aplikacji skojarzonych z zasadami zarządzania aplikacjami mobilnymi usługi Intune szyfrowanie jest zapewniane przez firmę Microsoft. Dane są szyfrowane synchronicznie podczas operacji we/wy na plikach zgodnie z ustawieniem w zasadach zarządzania aplikacjami mobilnymi. W zarządzanych aplikacjach w systemie Mac stosowane jest szyfrowanie AES-128 w trybie CBC przy użyciu bibliotek kryptograficznych platformy. Ta metoda szyfrowania nie jest zgodna ze standardem FIPS 140-2. Szyfrowanie SHA-256 jest obsługiwane jako jawna instrukcja przy użyciu parametru SigAlg i działa tylko w przypadku urządzeń z systemem w wersji 4.2 lub nowszej. Zawartość w pamięci masowej urządzenia jest zawsze szyfrowana.",
- "faceId1": "Czasami można zezwolić na korzystanie z rozpoznawania twarzy zamiast z numeru PIN. Użytkownicy będą proszeni o przeprowadzenie identyfikacji twarzy przy próbie otwarcia tej aplikacji za pomocą kont służbowych.",
- "faceId2": "Wybierz pozycję Tak, aby zezwolić na identyfikację twarzy zamiast numeru PIN przy otwieraniu aplikacji.",
- "managementLevelsAndroid1": "Użyj tej opcji, aby określić, czy te zasady mają zastosowanie do urządzeń administratora urządzeń systemu Android, urządzeń z profilem rozwiązania Android Enterprise czy urządzeń niezarządzanych.",
- "managementLevelsAndroid2": "{0}: Urządzenia niezarządzane to urządzenia, na których nie wykryto zarządzania przez usługę Intune MDM. Dotyczy to też usług MDM innych dostawców.",
- "managementLevelsAndroid3": "{0}: urządzenia zarządzane przez usługę Intune za pomocą administracyjnego interfejsu API urządzenia z systemem Android.",
- "managementLevelsAndroid4": "{0}: urządzenia zarządzane przez usługę Intune za pomocą profilów służbowych rozwiązania Android Enterprise lub pełnego zarządzania urządzeniami w rozwiązaniu Android Enterprise.",
- "managementLevelsIos1": "Użyj tej opcji, aby określić, czy te zasady mają zastosowanie do urządzeń zarządzanych przez usługę MDM, czy urządzeń niezarządzanych.",
- "managementLevelsIos2": "{0}: Urządzenia niezarządzane to urządzenia, na których nie wykryto zarządzania przez usługę Intune MDM. Dotyczy to też usług MDM innych dostawców.",
- "managementLevelsIos3": "{0}: Urządzenia zarządzane są zarządzane przez usługę Intune MDM.",
- "minAppVersion": "Zdefiniuj wymaganą minimalną wersję aplikacji, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
- "minAppVersionWarning": "Zdefiniuj zalecaną minimalną wersję aplikacji, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
- "minOsVersion": "Zdefiniuj wymaganą minimalną wersję systemu operacyjnego, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
- "minOsVersionWarning": "Zdefiniuj zalecaną minimalną wersję systemu operacyjnego, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
- "minPatchVersion": "Zdefiniuj najstarszy wymagany poziom poprawki zabezpieczeń systemu Android, jaką może mieć użytkownik, aby uzyskiwać bezpieczny dostęp do aplikacji.",
- "minPatchVersionWarning": "Zdefiniuj najstarszy zalecany poziom poprawki zabezpieczeń systemu Android, jaką może mieć użytkownik, aby uzyskiwać bezpieczny dostęp do aplikacji.",
- "minSdkVersion": "Zdefiniuj wymaganą minimalną wersję zestawu SDK ochrony aplikacji, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
- "requireAppPinDefault": "
Wybierz pozycję Tak, aby wyłączyć numer PIN aplikacji, gdy na zarejestrowanym urządzeniu zostanie wykryta blokada urządzenia.
",
- "targetAllApps1": "Użyj tej opcji, aby objąć swoimi zasadami aplikacje na urządzeniach z dowolnym stanem zarządzania.",
- "targetAllApps2": "Podczas rozwiązywania konfliktów zasad to ustawienie będzie zastępowane, jeśli użytkownik ma zasady przeznaczone dla konkretnego stanu zarządzania.",
- "touchId2": "Wybierz opcję {0}, aby określić wymaganie identyfikacji za pomocą odcisku palca zamiast numeru PIN w celu uzyskania dostępu do aplikacji."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Określ liczbę dni, które muszą upłynąć, zanim użytkownik będzie musiał zresetować numer PIN.",
- "previousPinBlockCount": "To ustawienie określa liczbę poprzednich kodów PIN, które będą przechowywane przez usługę Intune. Nowe kody PIN muszą być inne niż kody przechowywane przez usługę Intune."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Umożliwi to funkcji Windows Search kontynuowanie wyszukiwania w zaszyfrowanych danych.",
- "authoritativeIpRanges": "Włącz to ustawienie, jeśli chcesz przesłonić automatyczne wykrywanie zakresów adresów IP przez system Windows.",
- "authoritativeProxyServers": "Włącz to ustawienie, jeśli chcesz przesłonić automatyczne wykrywanie serwerów proxy przez system Windows.",
- "checkInput": "Sprawdź poprawność danych wejściowych",
- "dataRecoveryCert": "Certyfikat odzyskiwania to specjalny certyfikat systemu szyfrowania plików (EFS, Encrypting File System), którego można użyć, aby odzyskać zaszyfrowane pliki w razie utraty lub uszkodzenia klucza szyfrowania. Musisz utworzyć certyfikat odzyskiwania i podać go w tym miejscu. Więcej informacji można znaleźć tutaj",
- "enterpriseCloudResources": "
Określ zasoby chmury, które mają być traktowane jako firmowe i chronione przez zasady rozwiązania Windows Information Protection. Aby określić wiele wartości, można oddzielić poszczególne wpisy znakiem „|”.
Jeśli w firmie jest skonfigurowany serwer proxy, możesz określić serwer proxy, przez który będzie kierowany ruch do określonych zasobów chmury.
adres_URL[,serwer_proxy]|adres_URL[,serwer_proxy]
Bez serwera proxy: contoso.sharepoint.com|contoso.visualstudio.com Z serwerem proxy: contoso.sharepoint.com,serwer_proxy.contoso.com|contoso.visualstudio.com,serwer_proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Określ zakresy adresów IPv4 sieci firmowej. Są one używane razem z określonymi nazwami domen sieci przedsiębiorstwa określonymi w celu zdefiniowania granic sieci firmowej.
To ustawienie jest wymagane do włączenia rozwiązania Windows Information Protection
Aby określić wiele wartości, można oddzielić poszczególne wpisy przecinkiem.
Określ zakresy adresów IPv6 sieci firmowej. Są one używane razem z nazwami domen sieci przedsiębiorstwa określonymi w celu zdefiniowania granic sieci firmowej
Aby określić wiele wartości, można oddzielić poszczególne wpisy przecinkiem.
Jeśli w Twojej firmie skonfigurowano serwer proxy, możesz określić serwer proxy, przez który ma być kierowany ruch do zasobów w chmurze określonych w ustawieniach zasobów przedsiębiorstwa w chmurze.
Aby określić wiele wartości, można oddzielić poszczególne wpisy średnikiem.
Określ nazwy DNS sieci firmowej. Są one używane razem z zakresami adresów IP określonymi w celu zdefiniowania granic sieci firmowej. Aby określić wiele wartości, można oddzielić poszczególne wpisy przecinkiem.
To ustawienie jest wymagane do włączenia rozwiązania Windows Information Protection.
Przykład: ncorp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Określ nazwy DNS, które tworzą Twoją sieć korporacyjną. Są one używane w połączeniu z zakresami adresów IP określonymi w celu zdefiniowania granic Twojej sieci korporacyjnej. Można określić wiele wartości, oddzielając poszczególne wpisy znakiem „|”.
To ustawienie jest wymagane do włączenia usługi Windows Information Protection.
Na przykład: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
Jeśli w sieci firmowej są używane widoczne z zewnątrz serwery proxy, określ je tutaj. Oprócz adresu serwera proxy należy także określić port, przez który ruch ma być dozwolony i chroniony za pośrednictwem rozwiązania Windows Information Protection.
Uwaga: lista ta nie może zawierać serwerów znajdujących się na liście wewnętrznych serwerów proxy przedsiębiorstwa. Aby określić wiele wartości, można oddzielić poszczególne wpisy średnikiem.
",
- "maxInactivityTime1": "Określa maksymalny czas (w minutach) bezczynności urządzenia, po którym urządzenie zostanie zablokowane przy użyciu kodu PIN lub hasła. Użytkownicy mogą wybrać dowolną istniejącą wartość limitu czasu mniejszą niż maksymalny czas określony w aplikacji Ustawienia. Pamiętaj, że telefony Lumia 950 i 950XL mają maksymalną wartość limitu czasu wynoszącą 5 minut, niezależnie od wartości ustawionej za pomocą tych zasad.",
- "maxInactivityTime2": "0 (domyślnie) — brak zdefiniowanego limitu czasu. Wartość domyślna „0” jest interpretowana jako „Brak zdefiniowanego limitu czasu”.",
- "maxPasswordAttempts1": "Zachowanie tych zasad jest inne na urządzeniach przenośnych i komputerach stacjonarnych.",
- "maxPasswordAttempts2": "Na urządzeniu przenośnym, gdy użytkownik osiągnie wartość ustawioną przy użyciu tych zasad, urządzenie jest czyszczone.",
- "maxPasswordAttempts3": "Na komputerze stacjonarnym, gdy użytkownik osiągnie wartość ustawioną przy użyciu tych zasad, komputer nie jest czyszczony. Zamiast tego komputer jest przełączany w tryb odzyskiwania funkcji BitLocker, co sprawia, że dane są niedostępne, ale możliwe do odzyskania. Jeśli funkcja BitLocker nie jest włączona, tych zasad nie można wymusić.",
- "maxPasswordAttempts4": "Przed osiągnięciem limitu nieudanych prób użytkownik jest kierowany do ekranu blokady i ostrzegany o tym, że kolejne nieudane próby spowodują zablokowanie komputera. Gdy użytkownik osiągnie limit, urządzenie zostanie uruchomione ponownie i zostanie wyświetlona strona odzyskiwania funkcji BitLocker. Na tej stronie jest wyświetlany monit o wprowadzenie przez użytkownika klucza odzyskiwania funkcji BitLocker.",
- "maxPasswordAttempts5": "0 (domyślnie) — urządzenie nie jest nigdy czyszczone po wprowadzeniu nieprawidłowego kodu PIN lub hasła.",
- "maxPasswordAttempts6": "Najbezpieczniejsza wartość to 0, jeśli wszystkie wartości zasad są równe 0. W przeciwnym razie najbezpieczniejsza jest minimalna wartość zasad.",
- "mdmDiscoveryUrl": "Określ adres URL dla punktu końcowego rejestracji zarządzania urządzeniami przenośnymi, z którego będą korzystać użytkownicy dokonujący rejestracji w funkcji zarządzania urządzeniami przenośnymi. Domyślnie to ustawienie jest określone dla usługi Intune.",
- "minimumPinLength1": "Liczba całkowita, która określa wymaganą minimalną liczbę znaków w kodzie PIN. Wartość domyślna wynosi 4. Najniższa wartość, którą można skonfigurować dla tego ustawienia zasad to 4. Najwyższa wartość, którą można skonfigurować, musi być mniejsza niż liczba skonfigurowana w ustawieniu maksymalnej długości kodu PIN w zasadach lub liczba 127, zależnie od tego, która wartość jest niższa.",
- "minimumPinLength2": "Jeśli to ustawienie zasad zostanie skonfigurowane, długość kodu PIN musi być większa lub równa tej liczbie. Jeśli to ustawienie zasad zostanie wyłączone lub nie zostanie skonfigurowane, długość kodu PIN musi być większa lub równa 4.",
- "name": "Nazwa tej granicy sieci",
- "neutralResources": "
Jeśli w Twojej firmie są używane punkty końcowe przekierowywania uwierzytelniania, określ je tutaj. Określone tutaj lokalizacje są uznawane za osobiste lub firmowe w zależności od kontekstu połączenia przed przekierowaniem.
Aby określić wiele wartości, można oddzielić poszczególne wpisy przecinkiem.
Przykład: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Wartość, która ustawia funkcję Windows Hello dla firm jako metodę logowania do systemu Windows.",
- "passportForWork2": "Wartość domyślna to true. Jeśli dla tych zasad zostanie ustawiona wartość false, użytkownik nie może aprowizować funkcji Windows Hello dla firm, z wyjątkiem telefonów komórkowych dołączonych do usługi Microsoft Entra, które wymagają aprowizacji.",
- "pinExpiration": "Najwyższa liczba, którą można skonfigurować dla tego ustawienia zasad to 730. Najniższa liczba, którą można skonfigurować dla tego ustawienia zasad to 0. Jeśli dla tych zasad zostanie ustawiona wartość 0, kod PIN użytkownika nigdy nie wygasa.",
- "pinHistory1": "Najwyższa liczba, którą można skonfigurować dla tego ustawienia zasad to 50. Najniższa liczba, którą można skonfigurować dla tego ustawienia zasad to 0. Jeśli dla tych zasad zostanie ustawiona wartość 0, przechowywanie poprzednich kodów PIN nie jest wymagane.",
- "pinHistory2": "Bieżący kod PIN użytkownika należy do zestawu kodów PIN skojarzonych z kontem użytkownika. Historia kodów PIN nie jest zachowywana po zresetowaniu kodu PIN.",
- "protectUnderLock": "Chroni zawartość aplikacji, gdy urządzenie jest w stanie zablokowanym.",
- "protectionModeBlock": "
Blokuj: Blokuje możliwość przeniesienia danych przedsiębiorstwa poza chronione aplikacje.
",
- "protectionModeOff": "
Wyłączone: Użytkownik może przenosić dane poza chronione aplikacje. Żadne akcje nie są rejestrowane.
",
- "protectionModeOverride": "
Zezwalaj na przesłonięcia: Podczas próby przeniesienia danych z aplikacji chronionej do niechronionej użytkownikowi jest wyświetlany monit. W przypadku przesłonięcia tego monitu akcja zostanie zarejestrowana.
",
- "protectionModeSilent": "
Dyskretne: Użytkownik może przenosić dane poza chronione aplikacje. Te akcje są rejestrowane.
",
- "required": "Wymagane",
- "revokeOnMdmHandoff": "Dodano w systemie Windows 10 w wersji 1703. Te zasady służą do kontrolowania, czy klucze WIP mają zostać odwołane po uaktualnieniu urządzenia z usługi MAM do usługi MDM. W przypadku ustawienia na wartość „Wyłączone” klucze nie zostaną odwołane, a użytkownik będzie nadal mieć dostęp do chronionych plików po uaktualnieniu. Jest to zalecane, jeśli usługa MDM jest skonfigurowana za pomocą tego samego atrybutu EnterpriseID klucza WIP, co usługa MAM.",
- "revokeOnUnenroll": "Spowoduje to odwołanie kluczy szyfrowania, gdy rejestracja urządzenia dla tych zasad zostanie anulowana.",
- "rmsTemplateForEdp": "Identyfikator GUID TemplateID na potrzeby szyfrowania za pomocą usługi RMS. Szablon usługi Azure RMS umożliwia administratorowi IT skonfigurowanie szczegółów dotyczących użytkowników mających dostęp do pliku chronionego przy użyciu usługi RMS oraz okresu, w którym dostęp jest możliwy.",
- "showWipIcon": "W ten sposób, przez nałożenie ikony, użytkownik jest informowany, że działa w kontekście firmy.",
- "useRmsForWip": "Określa, czy zezwalać na szyfrowanie przy użyciu usługi Azure RMS na potrzeby funkcji WIP."
- },
- "requireAppPin": "
Wybierz pozycję Tak, aby wyłączyć numer PIN aplikacji, gdy na zarejestrowanym urządzeniu zostanie wykryta blokada urządzenia.
Uwaga: usługa Intune nie może wykryć rejestracji urządzeń za pomocą rozwiązania EMM innej firmy w systemie iOS/iPadOS.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "Instalacja aplikacji może wymusić ponowne uruchomienie urządzenia",
- "basedOnReturnCode": "Określ zachowanie na podstawie kodów powrotnych",
- "force": "Usługa Intune wymusi obowiązkowe ponowne uruchomienie urządzenia",
- "suppress": "Brak określonej czynności"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Wymagany czas instalacji (minuty)",
- "maxRunTimeInMinutesToolTip": "Liczba minut, przez które system będzie czekać na zakończenie instalacji programu. Wartość domyślna to 60 minut."
- },
- "RunAsAccountOptions": {
- "system": "System",
- "user": "Użytkownik"
- },
- "availableUninstall": "Zezwalaj na dostępne odinstalowywanie",
- "availableUninstallTooltip": "Wybierz pozycję „Tak”, aby udostępnić opcję odinstalowywania dla tej aplikacji użytkownikom z Portalu firmy. Wybierz pozycję „Nie”, aby uniemożliwić użytkownikom odinstalowanie aplikacji z Portalu firmy.",
- "bladeTitle": "Program",
- "deviceRestartBehavior": "Zachowanie ponownego uruchamiania urządzenia",
- "deviceRestartBehaviorTooltip": "Wybierz zachowanie ponownego uruchomienia urządzenia po pomyślnej instalacji aplikacji. Wybierz pozycję „Określ zachowanie na podstawie kodów powrotnych”, aby ponownie uruchomić urządzenie na podstawie ustawień konfiguracji kodów powrotnych. Wybierz pozycję „Brak określonej czynności”, aby pominąć ponowne uruchomienie urządzenia podczas instalacji aplikacji korzystającej z instalatora MSI. Wybierz pozycję „Instalacja aplikacji może wymusić ponowne uruchomienie urządzenia”, aby zezwolić na ukończenie instalacji aplikacji bez pomijania ponownego uruchamiania. Wybierz pozycję „Usługa Intune wymusi obowiązkowe ponowne uruchomienie urządzenia”, aby zawsze ponownie uruchamiać urządzenie po pomyślnej instalacji aplikacji.",
- "header": "Określ polecenia do instalowania i odinstalowywania tej aplikacji:",
- "installCommand": "Polecenie instalacji",
- "installCommandMaxLengthErrorMessage": "Polecenie instalacji nie może przekraczać maksymalnej dozwolonej długości równej 1024 znaki.",
- "installCommandTooltip": "Pełny wiersz polecenia instalacji służący do zainstalowania tej aplikacji.",
- "runAs32Bit": "Uruchom polecenia instalacji i odinstalowywania w procesie 32-bitowym na klientach 64-bitowych",
- "runAs32BitTooltip": "Wybierz opcję „Tak”, aby instalować i odinstalowywać aplikację w procesie 32-bitowym na klientach 64-bitowych. Wybierz opcję „Nie” (domyślna), aby instalować i odinstalowywać aplikację w procesie 64-bitowym na klientach 64-bitowych. Klienci 32-bitowi będą zawsze korzystać z procesu 32-bitowego.",
- "runAsAccount": "Zachowanie podczas instalowania",
- "runAsAccountTooltip": "Wybierz pozycję „System”, aby zainstalować tę aplikację dla wszystkich użytkowników, jeśli jest to obsługiwane. Wybierz pozycję „Użytkownik”, aby zainstalować tę aplikację dla użytkownika zalogowanego na urządzeniu. W przypadku aplikacji MSI o podwójnym przeznaczeniu zmiany uniemożliwią pomyślne zakończenie aktualizacji i dezinstalacji, dopóki nie zostanie przywrócona wartość zastosowana do urządzenia w trakcie pierwotnej instalacji.",
- "selectorLabel": "Program",
- "uninstallCommand": "Polecenie odinstalowywania",
- "uninstallCommandTooltip": "Pełny wiersz polecenia odinstalowywania służący do odinstalowania tej aplikacji."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Utwórz nowy",
- "createNewResourceAccountInfo": "
\r\nUtwórz nowe konto zasobu podczas rejestracji. Konto zasobu zostanie natychmiast dodane do tabeli kont zasobów, ale nie będzie aktywne do czasu, aż urządzenie zostanie zarejestrowane, a subskrypcja Surface Hub zweryfikowana. Dowiedz się więcej o kontach zasobów
\r\n ",
- "createNewResourceTitle": "Tworzenie nowego konta zasobu",
- "deviceNameInvalid": "Nazwa urządzenia ma nieprawidłowy format",
- "deviceNameRequired": "Nazwa urządzenia jest wymagana",
- "editResourceAccountLabel": "Edytuj",
- "selectExistingCommandMenu": "Wybierz istniejące"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "Nazwy mogą się składać z maksymalnie 15 znaków oraz mogą zawierać litery (a–z, A–Z), cyfry (0–9) i łączniki. Nazwy nie mogą składać się z samych cyfr. Nazwy nie mogą zawierać pustych miejsc."
- },
- "Header": {
- "addressableUserName": "Nazwa przyjazna dla użytkownika",
- "azureADDevice": "Skojarzone urządzenie usługi Microsoft Entra",
- "batch": "Tag grupy",
- "dateAssigned": "Data przypisania",
- "deviceAccountPwd": "Hasło konta urządzenia",
- "deviceAccountUpn": "Konto urządzenia",
- "deviceDisplayName": "Nazwa urządzenia",
- "deviceFriendlyName": "Przyjazna nazwa urządzenia",
- "deviceName": "Nazwa urządzenia",
- "deviceUseType": "Typ użycia urządzenia",
- "enrollmentState": "Stan rejestracji",
- "intuneDevice": "Skojarzone urządzenie usługi Intune",
- "lastContacted": "Ostatni kontakt",
- "make": "Producent",
- "model": "Model",
- "profile": "Przypisany profil",
- "profileStatus": "Stan profilu",
- "purchaseOrderId": "Zamówienie zakupu",
- "resourceAccount": "Konto zasobu",
- "serialNumber": "Numer seryjny",
- "userPrincipalName": "Użytkownik"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Wymagana jest przyjazna nazwa",
- "pwdRequired": "Wymagane jest hasło",
- "pwdValidFormat": "Nie można zaktualizować hasła. Wartość podana dla nowego hasła nie spełnia wymagań dotyczących długości lub złożoności domeny.",
- "upnRequired": "Wymagane jest konto urządzenia",
- "upnValidFormat": "Wartości mogą zawierać litery (a-z, A-Z), cyfry (0-9) i łączniki. Wartości nie mogą zawierać pustego miejsca."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Spotkanie i prezentacja",
- "teamCollaboration": "Współpraca zespołowa"
- },
- "Devices": {
- "featureDescription": "Rozwiązanie Windows Autopilot umożliwia dostosowanie gotowego do użycia środowiska (OOBE) do potrzeb użytkowników.",
- "importErrorStatus": "Niektóre urządzenia nie zostały zaimportowane. Kliknij tutaj, aby uzyskać więcej informacji.",
- "importPendingStatus": "Importowanie jest w toku. Czas, który upłynął: {0} min. Ten proces może zająć do {1} min."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Dołączono hybrydowo do usługi Microsoft Entra",
- "activeDirectoryADLabel": "Dołączanie hybrydowe do usługi Microsoft Entra za pomocą rozwiązania Autopilot",
- "azureAD": "Dołączono do usługi Microsoft Entra",
- "unknownType": "Nieznany typ"
- },
- "Filter": {
- "enrollmentState": "Stan",
- "profile": "Stan profilu"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "Przyjazna nazwa użytkownika nie może być pusta."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Utwórz szablon nazewnictwa, aby dodać nazwy do urządzeń podczas rejestracji.",
- "label": "Zastosuj szablon nazwy urządzenia"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "W przypadku profilów wdrażania rozwiązania Autopilot przyłączonych hybrydowo do rozwiązania Microsoft Entra urządzenia są nazywane przy użyciu ustawień określonych w konfiguracji dołączania do domeny."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MojaFirma-%RAND:4%",
- "label": "Wprowadź nazwę",
- "noDisallowedChars": "Nazwa może zawierać tylko znaki alfanumeryczne i łączniki oraz makro %SERIAL% lub %RAND:x%",
- "serialLength": "Nie można używać więcej niż 7 znaków w przypadku makra %SERIAL%",
- "validateLessThan15Chars": "Nazwa może się składać z maksymalnie 15 znaków",
- "validateNoSpaces": "Nazwy komputerów nie mogą zawierać spacji",
- "validateNotAllNumbers": "Nazwa musi także zawierać litery i/lub łączniki",
- "validateNotEmpty": "Nazwa nie może być pusta",
- "validateOnlyOneMacro": "Nazwa może zawierać tylko jedno makro, %SERIAL% lub %RAND:x%"
+ "ScopeTypes": {
+ "allDevices": "Wszystkie urządzenia",
+ "allUsers": "Wszyscy użytkownicy",
+ "allUsersAndDevices": "Wszyscy użytkownicy i wszystkie urządzenia",
+ "selectedGroups": "Wybrane grupy"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Opis",
+ "placeholder": "Wprowadź opis"
+ },
+ "NameTextBox": {
+ "label": "Nazwa",
+ "placeholder": "Wprowadź nazwę"
+ },
+ "PublisherTextBox": {
+ "label": "Wydawca",
+ "placeholder": "Wprowadź wydawcę"
+ },
+ "VersionTextBox": {
+ "label": "Wersja"
+ },
+ "headerDescription": "Utwórz nowy niestandardowy pakiet skryptu na podstawie napisanych przez siebie skryptów wykrywania i korygowania."
},
- "ConfigureComputerNameTemplate": {
- "description": "Utwórz unikatowe nazwy dla swoich urządzeń. Nazwy mogą się składać z maksymalnie 15 znaków oraz mogą zawierać litery (a–z, A–Z), cyfry (0–9) i łączniki. Nazwy nie mogą zawierać tylko cyfr. Nazwy nie mogą zawierać spacji. Za pomocą makra %SERIAL% możesz dodać numer seryjny specyficzny dla sprzętu. Możesz też użyć makra %RAND:x%, aby dodać losowy ciąg cyfr, gdzie x oznacza liczbę cyfr do dodania."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Włącz uruchamianie trybu OOBE po naciśnięciu klawisza Windows 5 razy bez uwierzytelniania użytkownika w celu rejestrowania urządzenia i aprowizacji wszystkich aplikacji oraz ustawień w kontekście systemu. Aplikacje i ustawienia w kontekście użytkownika zostaną dostarczone po jego zalogowaniu się.",
- "label": "Zezwalaj na wstępnie przygotowane wdrożenie"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Przepływ dołączania hybrydowego rozwiązania Autopilot usługi Microsoft Entra będzie kontynuowany, nawet jeśli nie ustanowi on łączności kontrolera domeny podczas OOBE.",
- "label": "Pomiń kontrolę połączeń z usługą AD"
- },
- "accountType": "Typ konta użytkownika",
- "accountTypeInfo": "Określ, czy na urządzeniu użytkownicy są administratorami, czy standardowymi użytkownikami. Należy pamiętać, że to ustawienie nie dotyczy kont administratora globalnego i administratora firmy. Te konta nie mogą być użytkownikami standardowymi, ponieważ mają dostęp do wszystkich funkcji administracyjnych w usłudze Microsoft Entra ID.",
- "configOOBEInfo": "
\r\nSkonfiguruj środowisko gotowe do użycia dla urządzeń z rozwiązaniem Autopilot\r\n
",
- "configureDevice": "Tryb wdrożenia",
- "configureDeviceHintForSurfaceHub2": "Rozwiązanie Autopilot obsługuje dla urządzeń Surface Hub 2 tylko tryb samodzielnego wdrażania. Ten tryb nie powoduje skojarzenia użytkownika z zarejestrowanym urządzeniem, więc nie wymaga poświadczeń użytkownika.",
- "configureDeviceHintForWindowsPC": "
\r\n Tryb wdrożenia służy do kontrolowania, czy użytkownik musi podać poświadczenia w celu aprowizacji urządzenia.\r\n
\r\n
\r\n
\r\n Sterowane przez użytkownika: urządzenia są kojarzone z użytkownikiem je rejestrującym, a do aprowizacji urządzenia będą wymagane poświadczenia\r\n
\r\n
\r\n Wdrażanie samodzielne (wersja zapoznawcza): urządzenia nie są kojarzone z użytkownikiem je rejestrującym, a do aprowizacji urządzenia nie będą wymagane poświadczenia\r\n
\r\nNastępujące opcje są automatycznie włączone dla urządzeń rozwiązania Autopilot w trybie samodzielnego wdrażania:\r\n
\r\n
\r\n
\r\n Pomiń wybór użycia domowego lub służbowego\r\n
\r\n
\r\n Pomiń rejestrację producenta OEM i konfigurację usługi OneDrive\r\n
\r\n
\r\n Pomiń uwierzytelnianie użytkownika w środowisku OOBE\r\n
\r\n
",
- "endUserDevice": "Sterowane przez użytkownika",
- "hideEscapeLink": "Ukryj opcje zmiany konta",
- "hideEscapeLinkInfo": "Opcje zmiany konta i rozpoczęcia od nowa przy użyciu innego konta pojawiają się, odpowiednio, podczas początkowej konfiguracji urządzenia na firmowej stronie logowania oraz na stronie błędu domeny. Aby ukryć te opcje, musisz skonfigurować znakowanie firmowe w usłudze Microsoft Entra ID (wymaga systemu Windows 10 w wersji 1809 lub nowszej albo systemu Windows 11).",
- "info": "Ustawienia profilu rozwiązania Autopilot służą do definiowania gotowego do użycia środowiska wyświetlanego użytkownikom podczas uruchamiania systemu Windows po raz pierwszy.",
- "language": "Język (region)",
- "languageInfo": "Określ język i region, które będą używane.",
- "licenseAgreement": "Postanowienia licencyjne firmy Microsoft",
- "licenseAgreementInfo": "Określ, czy użytkownikom ma być wyświetlana Umowa Licencyjna Użytkownika Oprogramowania (EULA).",
- "plugAndForgetDevice": "Samodzielne wdrażanie",
- "privacySettingWarning": "Wartość domyślna zbierania danych diagnostycznych została zmieniona dla urządzeń z systemem Windows 10 w wersji 1903 lub nowszej lub Windows 11.",
- "privacySettings": "Ustawienia prywatności",
- "privacySettingsInfo": "Określ, czy użytkownikom mają być wyświetlane ustawienia prywatności.",
- "showCortanaConfigurationPage": "Konfiguracja Cortany",
- "showCortanaConfigurationPageInfo": "Opcja „Pokaż” włączy wprowadzenie do konfiguracji Cortany podczas uruchamiania.",
- "skipEULAWarning": "Ważne informacje na temat ukrywania postanowień licencyjnych",
- "skipKeyboardSelection": "Automatycznie skonfiguruj klawiaturę",
- "skipKeyboardSelectionInfo": "W przypadku wartości true pomiń stronę wyboru klawiatury, jeśli ustawiony jest język.",
- "subtitle": "Profile rozwiązania Autopilot",
- "title": "Środowisko gotowe do użycia (OOBE, Out-of-box experience)",
- "useOSDefaultLanguage": "Domyślny systemu operacyjnego",
- "userSelect": "Wybór użytkownika"
- },
- "Sync": {
- "lastRequestedLabel": "Ostatnie żądanie synchronizacji",
- "lastSuccessfulLabel": "Ostatnia pomyślna synchronizacja",
- "syncInProgress": "Synchronizacja jest w toku. Zajrzyj tu ponownie wkrótce.",
- "syncInitiated": "Zainicjowano synchronizację ustawień rozwiązania Autopilot.",
- "syncSettingsTitle": "Synchronizuj ustawienia rozwiązania Autopilot"
- },
- "Title": {
- "devices": "Urządzenia rozwiązania Windows AutoPilot"
- },
- "Tooltips": {
- "addressableUserName": "Nazwa powitalna wyświetlana podczas konfiguracji urządzenia.",
- "azureADDevice": "Przejdź do szczegółów skojarzonego urządzenia. Wartość Brak oznacza, że nie ma żadnego skojarzonego urządzenia.",
- "batch": "Atrybut ciągu, który może służyć do identyfikowania grupy urządzeń. Pole tagu grupy usługi Intune jest mapowane na atrybut OrderID na urządzeniach usługi Microsoft Entra.",
- "dateAssigned": "Znacznik czasu przypisania profilu do urządzenia.",
- "deviceAccountPwd": "Hasło konta urządzenia dla urządzeń Surface Hub. W przypadku wprowadzenia podaj również konto urządzenia i przyjazną nazwę.",
- "deviceAccountUpn": "Adres e-mail konta urządzenia dla urządzeń Surface Hub. W przypadku wprowadzenia podaj również hasło do konta urządzenia i przyjazną nazwę.",
- "deviceDisplayName": "Skonfiguruj unikatową nazwę urządzenia. Ta nazwa zostanie zignorowana we wdrożeniach dołączonych hybrydowo do usługi Microsoft Entra. Nazwa urządzenia nadal pochodzi z profilu dołączania do domeny dla urządzeń hybrydowych usługi Microsoft Entra.",
- "deviceFriendlyName": "Przyjazna nazwa urządzenia Surface Hub. W przypadku wprowadzenia podaj również konto urządzenia i hasło do tego konta.",
- "deviceName": "Nazwa pokazywana, gdy ktoś próbuje odnaleźć urządzenie i połączyć się z nim.",
- "deviceUseType": " Urządzenie zostanie skonfigurowane zgodnie z dokonanym wyborem. Możesz to zawsze zmienić później w ustawieniach. \r\n
\r\n
Na potrzeby spotkań i prezentacji funkcja Windows Hello nie jest włączana i dane są usuwane po każdej sesji.\r\n
\r\n
Na potrzeby współpracy zespołowej funkcja Windows Hello jest włączana i zapisywane są profile umożliwiające szybkie logowanie się.
\r\n
",
- "enrollmentState": "Określa, czy urządzenie zostało zarejestrowane.",
- "intuneDevice": "Przejdź do szczegółów skojarzonego urządzenia. Wartość Brak oznacza, że nie ma żadnego skojarzonego urządzenia.",
- "lastContacted": "Znacznik czasu ostatniego kontaktu z urządzeniem.",
- "make": "Producent wybranego urządzenia.",
- "model": "Model wybranego urządzenia",
- "profile": "Nazwa profilu przypisanego do urządzenia.",
- "profileStatus": "Określa, czy do urządzenia jest przypisany profil.",
- "purchaseOrderId": "Identyfikator zamówienia zakupu",
- "resourceAccount": "Tożsamość urządzenia lub główna nazwa użytkownika (UPN).",
- "serialNumber": "Numer seryjny wybranego urządzenia.",
- "userPrincipalName": "Użytkownik na potrzeby wstępnego wypełnienia uwierzytelniania podczas konfiguracji urządzenia."
- },
- "allDevices": "Wszystkie urządzenia",
- "allDevicesAlreadyAssignedError": "Profil rozwiązania Autopilot jest już przypisany do wszystkich urządzeń.",
- "assignFailedDescription": "Nie można zaktualizować przypisań dla profilu {0}.",
- "assignFailedTitle": "Nie można zaktualizować przypisań profilu rozwiązania Autopilot.",
- "assignSuccessDescription": "Pomyślnie zaktualizowano przypisania dla profilu {0}.",
- "assignSuccessTitle": "Pomyślnie zaktualizowano przypisania profilu rozwiązania Autopilot.",
- "assignSufaceHub2ProfileNextStep": "Następne kroki dla tego wdrożenia",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Przypisz ten profil do co najmniej jednej grupy urządzeń",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Przypisz konto zasobu do każdego urządzenia Surface Hub, na którym wdrożono ten profil",
- "assignedDevicesCount": "Przypisane urządzenia",
- "assignedDevicesResourceAccountDescription": "
Aby wdrożyć ten profil na urządzeniu, musisz przypisać konto zasobu do urządzenia. Wybieraj po jednym urządzeniu, aby przypisać mu istniejące konto zasobu lub utworzyć nowe. Dowiedz się więcej o kontach zasobów
",
- "assignedDevicesResourceAccountStatusBarMessage": "Ta tabela zawiera listę tylko tych urządzeń Surface Hub 2, do których przypisano ten profil.",
- "assigningDescription": "Aktualizowanie przypisań dla profilu {0}.",
- "assigningTitle": "Aktualizowanie przypisań profilu rozwiązania Autopilot.",
- "autoremediationContext": "Wykryliśmy zmianę sprzętu na tym urządzeniu. Próbujemy automatycznie zarejestrować nowy sprzęt. Nie musisz nic teraz robić; stan zostanie zaktualizowany przy następnym zaewidencjonowaniu z wynikiem. Dowiedz się więcej o resetowaniu profilu.",
- "autoremediationTitle": "Urządzenie {0} ma oczekującą poprawkę",
- "cannotDeleteMessage": "Ten profil jest przypisany do grup. Aby można było go usunąć, należy anulować przypisanie wszystkich grup z tego profilu.",
- "cannotDeleteTitle": "Nie można usunąć elementu {0}",
- "createdDateTime": "Utworzono",
- "deleteMessage": "Jeśli ten profil rozwiązania Autopilot zostanie usunięty, wszystkie urządzenia przypisane do tego profilu będą wyświetlane jako Nieprzypisane.",
- "deleteMessageWithPolicySet": "Profil {0} jest dołączony do co najmniej jednego zestawu zasad. Jeśli usuniesz profil {0}, nie będzie już można go przypisywać za pomocą tych zestawów zasad.",
- "deleteTitle": "Czy na pewno chcesz usunąć ten profil?",
- "description": "Opis",
- "deviceType": "Typ urządzenia",
- "deviceUse": "Użycie urządzenia",
- "directoryServiceHintForSurfaceHub2": "
\r\n Usługa Autopilot obsługuje tylko urządzenia usługi Microsoft Entra dołączone dla urządzeń Surface Hub 2. Określ sposób dołączania urządzeń do usługi Active Directory (AD) w organizacji.\r\n
\r\n
\r\n
\r\n Dołączono do usługi Microsoft Entra: tylko w chmurze bez lokalnej usługi Windows Server Active Directory.\r\n
\r\n Określ sposób dołączania urządzeń do usługi Active Directory (AD) w Twojej organizacji:\r\n
\r\n
\r\n
\r\n Dołączono do usługi Microsoft Entra: tylko w chmurze bez lokalnej usługi Windows Server Active Directory\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Wystąpił błąd podczas pobierania liczby przypisanych urządzeń.",
- "getAssignmentsError": "Wystąpił błąd podczas pobierania przypisań profilu rozwiązania Autopilot.",
- "harvestDeviceId": "Przekonwertuj wszystkie docelowe urządzenia do rozwiązania Autopilot",
- "harvestDeviceIdDescription": "Domyślnie ten profil można stosować tylko do urządzeń rozwiązania Autopilot zsynchronizowanych z usługi Autopilot.",
- "harvestDeviceIdInfo": "\r\n Wybierz pozycję Tak, aby zarejestrować wszystkie urządzenia docelowe w rozwiązaniu Autopilot, o ile jeszcze nie zostały zarejestrowane. Gdy następnym razem urządzenia będą przechodzić przez tryb Out of Box Experience (OOBE) systemu Windows, będzie się to odbywać zgodnie z przypisanym scenariuszem rozwiązania Autopilot.\r\n \r\n Pamiętaj, że niektóre scenariusze rozwiązania Autopilot wymagają konkretnych minimalnych kompilacji systemu Windows. Upewnij się, że na Twoim urządzeniu jest minimalna wymagana kompilacja umożliwiająca przejście scenariusza.\r\n \r\n Usunięcie tego profilu nie spowoduje usunięcia z rozwiązania Autopilot urządzeń, których on dotyczy. Aby usunąć urządzenie z rozwiązania Autopilot, użyj widoku Urządzenia rozwiązania Windows AutoPilot.\r\n ",
- "harvestDeviceIdWarning": "Po konwersji urządzenia rozwiązania Autopilot można przywrócić tylko przez usunięcie ich z listy urządzeń rozwiązania Autopilot.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Profile wdrażania rozwiązania Windows AutoPilot umożliwiają dostosowywanie środowiska out-of-box experience na Twoich urządzeniach.",
- "invalidProfileNameMessage": "Znak „{0}” nie jest dozwolony",
- "joinTypeLabel": "Dołącz do usługi Microsoft Entra ID jako",
- "lastModifiedDateTime": "Ostatnia modyfikacja:",
- "manualRemediationContext": "Wykryliśmy zmianę sprzętu na tym urządzeniu. Profil rozwiązania Autopilot nie zostanie automatycznie odebrany po jego zresetowaniu, chyba że ponownie zarejestrujesz urządzenie. Dowiedz się więcej o resetowaniu profilu.",
- "manualRemediationTitle": "Urządzenie {0} wymaga Twojej uwagi",
- "name": "Nazwa",
- "noAutopilotProfile": "Brak profilów rozwiązania Autopilot",
- "notEnoughPermissionAssignedError": "Nie masz wystarczających uprawnień, aby przypisać ten profil do co najmniej jednej z wybranych grup. Skontaktuj się z administratorem.",
- "profile": "profil",
- "resourceAccountStatusBarMessage": "Konto zasobu jest wymagane dla każdego urządzenia Surface Hub 2, do którego zostanie wdrożony ten profil. Kliknij, aby dowiedzieć się więcej.",
- "selectServices": "Wybierz usługę katalogową, do której zostaną dołączone urządzenia",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Tryb wdrożenia",
- "windowsPCCommandMenu": "Komputer z systemem Windows",
- "directoryServiceLabel": "Dołącz do usługi Microsoft Entra ID jako"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Grupy administratorów",
- "RoleAssignmentAdminDesc": "Użytkownicy należący do grupy administratorów są administratorami przypisanymi do tej roli",
- "rolesMenuTitle": "Role usługi Endpoint Manager",
- "RoleAssignmentScopeDesc": "Administratorzy w ramach tego przypisania roli mogą określać zasady, aplikacje i zadania zdalne jako elementy docelowe",
- "RoleAssignmentScope": "Grupy zakresu"
- },
+ "ScopeTags": {
+ "headerDescription": "Wybierz co najmniej jedną grupę, aby przypisać pakiet skryptów."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Skrypt wykrywania",
+ "placeholder": "Tekst skryptu wejściowego",
+ "requiredValidationMessage": "Wprowadź skrypt wykrywania"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Wymuszaj sprawdzanie podpisu skryptu"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Uruchom ten skrypt, używając poświadczeń zalogowanego użytkownika"
+ },
+ "RemediationScript": {
+ "infoBox": "Ten skrypt zostanie uruchomiony w trybie tylko wykrywania, ponieważ nie ma skryptu korygującego."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Skrypt korygujący",
+ "placeholder": "Tekst skryptu wejściowego"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Uruchom skrypt w 64-bitowym programie PowerShell"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Nieprawidłowy skrypt. Co najmniej jeden znak użyty w skrypcie jest nieprawidłowy."
+ },
+ "headerDescription": "Utwórz niestandardowy pakiet skryptów na podstawie napisanych przez siebie skryptów. Domyślnie skrypty będą uruchamiane na przypisanych urządzeniach każdego dnia.",
+ "infoBox": "Ten skrypt jest tylko do odczytu. Niektóre ustawienia dla tego skryptu mogą być wyłączone."
+ },
+ "title": "Utwórz niestandardowy skrypt",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Interwał",
+ "time": "Data i godzina"
+ },
+ "Interval": {
+ "day": "Powtarzane codziennie",
+ "days": "Powtarzane co {0} dni",
+ "hour": "Powtarzane co godzinę",
+ "hours": "Powtarzane co {0} godz.",
+ "month": "Powtarzane co miesiąc",
+ "months": "Powtarzane co {0} mies.",
+ "week": "Powtarzane co tydzień",
+ "weeks": "Powtarzane co {0} tyg."
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) {1}",
+ "withDate": "{0} {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Edycja — {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Tylko wybrane aplikacje blokujące zakończone niepowodzeniem w fazie techników",
- "apps": "aplikacje",
- "appsListName": "Lista aplikacji",
- "blockingApps": "Blokowanie aplikacji",
- "managedApps": "Aplikacje zarządzane",
- "noApps": "Brak aplikacji",
- "noAppsError": "Błąd podczas pobierania aplikacji",
- "selectApps": "Wybierz aplikacje",
- "selectedAppsCount": "Wybrane aplikacje: {0} (maks. 100)",
- "useSelectedAppsAll": "Wszystkie",
- "useSelectedAppsSelected": "Wybrane",
- "useSelectedAppsToggleLabel": "Blokuj użycie urządzenia, dopóki nie zostaną zainstalowane wymagane aplikacje, jeśli są przypisane do użytkownika/urządzenia"
- },
- "Header": {
- "application": "Aplikacja",
- "publisher": "Wydawca",
- "version": "Wersja"
- },
- "SearchBox": {
- "ariaLabel": "Wyszukaj aplikacje",
- "placeHolder": "Wyszukaj według nazwy lub wydawcy"
- },
- "allowToUseToggle": "Zezwalaj użytkownikom na używanie urządzenia, jeśli wystąpi błąd instalacji",
- "blockToggle": "Zablokuj możliwość korzystania z urządzenia, dopóki nie zostaną zainstalowane wszystkie aplikacje i profile",
- "blockToolTip": "Jeśli na przykład dodasz program Microsoft Word do tej listy, docelowi użytkownicy i urządzenia nie będą mogli opuścić strony stanu rejestracji do czasu pomyślnego zainstalowania programu Word.",
- "collectLogToggle": "Włącz zbieranie dzienników i stronę diagnostyczną dla użytkowników końcowych",
- "create": "Tworzenie profilu",
- "customMessageTextBox": "Komunikat o błędzie",
- "customMessageToggle": "Pokaż niestandardowy komunikat, gdy wystąpi limit czasu lub błąd",
- "enableForAutopilotOnlyToggle": "Pokaż stronę tylko urządzeniom aprowizowanym za pomocą środowiska out-of-box experience (OOBE)",
- "installQualityUpdatesToggle": "Instalowanie aktualizacji dotyczących jakości systemu Windows (może to spowodować ponowne uruchomienie urządzenia) (wersja zapoznawcza)",
- "progressToggle": "Pokaż postęp konfiguracji aplikacji i profilu",
- "resetToggle": "Zezwalaj użytkownikom na resetowanie urządzenia, jeśli wystąpi błąd instalacji",
- "timeout": "Pokaż błąd, jeśli instalacja trwa dłużej niż określona liczba minut"
- },
+ "OfficeUpdateChannel": {
+ "current": "Bieżący kanał",
+ "deferred": "Półroczny kanał dla przedsiębiorstw",
+ "firstReleaseCurrent": "Bieżący kanał (wersja zapoznawcza)",
+ "firstReleaseDeferred": "Półroczny kanał dla przedsiębiorstw (wersja zapoznawcza)",
+ "monthlyEnterprise": "Miesięczny kanał dla przedsiębiorstw",
+ "placeHolder": "Wybierz zasady"
+ },
"TableHeaders": {
"activity": "Aktywność",
"activityName": "Nazwa działania",
@@ -1293,30 +417,175 @@
"excludedGroups": "Wykluczone grupy",
"licenseType": "Typ licencji"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Skonfiguruj wymagania dotyczące kodu PIN i poświadczeń, które użytkownicy muszą spełnić, aby uzyskać dostęp do aplikacji w kontekście roboczym."
- },
- "DataProtection": {
- "infoText": "Ta grupa obejmuje kontrole ochrony przed utratą danych, takie jak ograniczenia wycinania, kopiowania, wklejania i zapisywania jako. Te ustawienia określają sposób interakcji użytkowników z danymi w aplikacjach."
- },
- "DeviceTypes": {
- "selectOne": "Wybierz przynajmniej jeden typ urządzenia."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Jako docelowe ustaw aplikacje na wszystkich typach urządzeń"
- },
- "infoText": "Wybierz, w jaki sposób chcesz zastosować te zasady do aplikacji na różnych urządzeniach. Następnie dodaj co najmniej jedną aplikację.",
- "selectOne": "Wybierz co najmniej jedną aplikację, aby utworzyć zasady."
- }
- },
- "AssignmentAction": {
- "exclude": "Wykluczone",
- "include": "Zawarte",
- "includeAllDevicesVirtualGroup": "Zawarte",
- "includeAllUsersVirtualGroup": "Zawarte"
- },
+ "Inputs": {
+ "accountDomain": "Domena konta",
+ "accountDomainHint": "np. contosodomain",
+ "accountDomainInfoBalloon": "Określ domenę konta użytkownika.",
+ "accountTypeInfoBalloon": "Określ typ konfigurowanego konta na podstawie modelu uwierzytelniania",
+ "allowContactSetting": "Zezwalaj użytkownikowi na zmianę ustawienia kontaktów",
+ "allowContactSyncInfoBalloon": "Określ, czy użytkownik może zmieniać ustawienie synchronizacji kontaktów",
+ "allowUserChange": "Zezwalaj użytkownikowi na zmianę ustawienia",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Wprowadź nazwę pakietu podobną do com.microsoft.word",
+ "androidUrlValidation": "Wprowadź prawidłowy adres URL podobny do następującego: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "Kontekst instalacji aplikacji",
+ "appUrlLabel": "Adres URL sklepu App Store",
+ "appleUrlValidation": "Wprowadź prawidłowy adres URL podobny do https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Odpowiedni typ urządzenia",
+ "assignmentActionLabel": "Tryb",
+ "authenticationMethodInfoBalloon": "Określ metodę uwierzytelniania dla użytkownika",
+ "authenticationMetod": "Metoda uwierzytelniania",
+ "authenticationType": "Typ uwierzytelniania",
+ "authenticationTypeInfoBalloon": "Określ typ uwierzytelniania dla użytkownika",
+ "availableLicenseCount": "Dostępne licencje",
+ "basicAuth": "Uwierzytelnianie podstawowe",
+ "biometricsInfoBalloon": "Biometria (np. funkcja TouchID lub FaceID) może być wymagana, aby użytkownicy mogli otwierać aplikację na swoich urządzeniach. Gdy biometria jest wymagana, jest używana obok metod uwierzytelniania wybranych w tym profilu. To ustawienie nie powinno być włączone, gdy zostały wdrożone zasady ochrony aplikacji usługi Intune, ponieważ zasady ochrony aplikacji obejmują wymagania w zakresie dostępu przed uzyskaniem dostępu do danych zarządzanych. Włączenie obu opcji będzie skutkować wieloma monitami o dostęp przy otwieraniu aplikacji Outlook Mobile. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
+ "bookNameLabel": "Nazwa książki",
+ "bundleDescriptionHint": "Wprowadź opis, który opisuje uwzględnione aplikacje.",
+ "calendar": "Kalendarz",
+ "categoryLabel": "Kategoria",
+ "categoryNameLabel": "Domyślna nazwa",
+ "certProfileType": "Typ profilu certyfikatu",
+ "certificate": "Certyfikat",
+ "certificates": "Certyfikaty",
+ "commandLineLabel": "Argumenty wiersza polecenia",
+ "commandLineSizeHint": "Maksymalna długość tekstu argumentów wiersza polecenia to 1024 znaki",
+ "configurationSettingsFormatLabel": "Format ustawień konfiguracji",
+ "configurationSettingsLabel": "Format ustawień",
+ "contactSync": "Zapisz kontakty",
+ "contactSyncInfoBalloon": "Zapisywanie kontaktów w natywnej książce adresowej urządzenia przenośnego pozwala na łączenie nowych rozmów i wiadomości SMS z istniejącymi kontaktami użytkownika w programie Outlook. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
+ "contacts": "Kontakty",
+ "createdDateTime": "Utworzono",
+ "defaultCategoryHint": "Kategorii domyślnych nie można zmienić",
+ "deploySMimeCertsFromIntune": "Wdróż certyfikaty S/MIME z usługi Intune",
+ "descriptionGenericLabel": "Opis",
+ "descriptionHint": "Wprowadź opis...",
+ "descriptionLabel": "Opis",
+ "descriptionSizeHint": "Długość opisu nie powinna przekraczać 10 000 znaków",
+ "developerLabel": "Deweloper",
+ "developerSizeHint": "Maksymalna długość nazwy dewelopera to 256 znaków.",
+ "disable": "Wyłącz",
+ "disabled": "Wyłączone",
+ "displayNameLabel": "Nazwa",
+ "displayVersionHint": "Wprowadź wersję aplikacji",
+ "displayVersionLabel": "Wersja aplikacji",
+ "displayVersionLengthCheck": "Długość wersji wyświetlanej powinna wynosić maksymalnie 130 znaków",
+ "eBookCategoryNameLabel": "Domyślna nazwa",
+ "emailAccount": "Nazwa konta e-mail",
+ "emailAccountHint": "np. firmowy adres e-mail",
+ "emailAccountInfoBalloon": "Określ nazwę konta e-mail, która będzie wyświetlana dla użytkowników na ich urządzeniach",
+ "emailAddressAttribute": "Atrybut adresu e-mail z Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Określ adres e-mail, który będzie używany do wysyłania i odbierania poczty",
+ "emailServer": "Serwer poczty e-mail",
+ "emailServerHint": "np. mail.contoso.com",
+ "emailServerInfoBalloon": "Określ nazwę hosta programu Exchange Server",
+ "enable": "Włącz",
+ "enableSMime": "Włącz protokół S/MIME",
+ "enabled": "Włączony",
+ "encryptAllEmails": "Szyfruj wszystkie wiadomości e-mail",
+ "encryptionCertificates": "Certyfikaty szyfrowania",
+ "endUserNotifications": "Powiadomienia użytkowników końcowych",
+ "enrollmentTypeLabel": "Typ rejestracji urządzenia",
+ "externalRecipients": "Porada dotycząca poczty dla adresatów zewnętrznych",
+ "externalRecipientsInfoBalloon": "Porady dotyczące poczty dla adresatów zewnętrznych są wyświetlane, gdy nadawca dodaje adresata zewnętrznego lub grupę dystrybucji zawierającą adresatów zewnętrznych. Porada dotycząca poczty informuje nadawców, że pisana wiadomość wyjdzie poza organizację, co pomaga im w dobraniu właściwego słownictwa, stylu i zawartości. Funkcja ta jest dostępna tylko dla kont usługi Exchange Online i kont lokalnych korzystających z nowoczesnego uwierzytelniania hybrydowego. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Włączone.",
+ "focusedInbox": "Priorytetowa skrzynka odbiorcza",
+ "focusedInboxInfoBalloon": "Priorytetowa skrzynka odbiorcza dzieli skrzynkę odbiorczą na dwie karty — Priorytetowe i Inne. Najważniejsze wiadomości e-mail są widoczne na karcie Priorytetowe, a pozostałe wiadomości, chociaż usunięte z głównego widoku, są nadal łatwo dostępne na karcie Inne. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, domyślnym ustawieniem w aplikacji jest Włączone.",
+ "fullScreenEnabledLabel": "Tryb pełnoekranowy",
+ "gmailNineAmountOfEmail": "Liczba wiadomości e-mail do synchronizacji",
+ "gmailNineAuthenticationMethodInfoBalloon": "Wybierz, w jaki sposób użytkownicy mają być uwierzytelniani na serwerze poczty e-mail. Za pomocą certyfikatów możesz zapewnić użytkownikom końcowym najbezpieczniejsze i najbardziej bezproblemowe środowisko. Uwierzytelnianie oparte na certyfikacie nie jest jeszcze dostępne, ponieważ profile certyfikatów SCEP i PKCS dla urządzeń właścicieli urządzeń są niedostępne.",
+ "gmailNineCertificateUPNInfoBalloon": "Certyfikat musi mieć alternatywną nazwę podmiotu w postaci głównej nazwy użytkownika (UPN).",
+ "gmailNineEmailAddressInfoBalloon": "Atrybut, który usługa Intune uzyskuje z Microsoft Entra ID w celu dynamicznego generowania adresu e-mail, który będzie używany przez profil, np. MyName@contoso.com (UPN). Dowiedz się więcej na temat atrybutów Microsoft Entra dla profilów adresu e-mail.",
+ "gmailNineEmailServerInfoBalloon": "Lokalizacja usługi Exchange (adres URL) serwera poczty e-mail, z którą łączy się określona aplikacja w celu pobrania poczty e-mail.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Kontroluj liczbę wiadomości e-mail synchronizowanych przez klienta.",
+ "gmailNineSSLInfoBalloon": "Włącz protokół SSL, aby zabezpieczyć komunikację z serwerem poczty e-mail.",
+ "gmailNineUsernameInfoBalloon": "Atrybut, który usługa Intune uzyskuje z Microsoft Entra ID w celu dynamicznego generowania nazwy użytkownika, która będzie używana przez profil, np. MyName@contoso.com (UPN) lub or MyName (username). Dowiedz się więcej na temat atrybutów Microsoft Entra dla profilów adresu e-mail.",
+ "ignoreManifestScope": "Ignoruj zakres manifestu",
+ "ignoreVersionDetection": "Ignoruj wersję aplikacji",
+ "informationUrlLabel": "Adres URL informacji",
+ "informationUrlSizeHint": "Maksymalna długość adresu URL informacji to 1024 znaki",
+ "installAsManaged": "Instaluj jako zarządzaną",
+ "installationSourceLabel": "Typ aplikacji",
+ "installerTypeInfoBalloon": "Typ instalatora pakietu aplikacji.",
+ "installerTypeLabel": "Typ instalatora",
+ "isFeatured": "Pokaż jako polecaną aplikację w Portalu firmy",
+ "isMAMEnabledToggleLabel": "Tak",
+ "lastModifiedDateTime": "Godzina ostatniej aktualizacji",
+ "ldapUrl": "Adres URL LDAP",
+ "licensingType": "Obsługuje przypisanie kontekstu urządzenia",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimalna wersja systemu operacyjnego",
+ "modernAuth": "Nowoczesne uwierzytelnianie",
+ "nameHint": "Wprowadź nazwę",
+ "nameLabel": "Nazwa",
+ "nameSizeHint": "Maksymalna długość nazwy to 512 znaków.",
+ "notConfigured": "Nie skonfigurowano",
+ "notesLabel": "Uwagi",
+ "notesSizeHint": "Maksymalna długość tekstu notatki to 1024 znaki.",
+ "notificationType": "Typ powiadomienia",
+ "oneDay": "Jeden dzień",
+ "oneMonth": "Jeden miesiąc",
+ "oneWeek": "Jeden tydzień",
+ "outlookSMimeSettings": "Ustawienia S/MIME programu Outlook",
+ "ownerLabel": "Właściciel",
+ "ownerSizeHint": "Maksymalna długość nazwy właściciela to 256 znaków.",
+ "packageIdLabel": "Identyfikator pakietu",
+ "packageNameLabel": "Nazwa pakietu",
+ "pivCredentialNotConfigured": "Nie wybrano wystawcy pochodnych poświadczeń dla dzierżawy. Musisz skonfigurować wystawcę, zanim będzie można pomyślnie zastosować te zasady do urządzeń.",
+ "platformLabel": "Platforma",
+ "policyDescriptionLabel": "Opis",
+ "policyNameLabel": "Nazwa",
+ "preComposedIconEnabled": "Wstępnie skompilowane",
+ "primarySMTPAddress": "Podstawowy adres SMTP",
+ "privacyUrlLabel": "Adres URL dotyczący ochrony prywatności",
+ "publisherHint": "Wprowadź nazwę wydawcy",
+ "publisherLabel": "Wydawca",
+ "publisherSizeHint": "Długość nazwy wydawcy powinna należeć do zakresu od 2 do 1024 znaków (włącznie)",
+ "require": "Wymagaj",
+ "requireBiometrics": "Wymagaj informacji biometrycznych na potrzeby dostępu do aplikacji",
+ "sAMAccountName": "Nazwa konta SAM",
+ "scopeTagsRequired": "Wymagany jest co najmniej jeden tag zakresu",
+ "searchAppLabel": "Wybierz aplikację",
+ "searchAppLinkText": "Wyszukaj w sklepie App Store",
+ "searchWinGetPublicRepositoryLinkText": "Przeszukaj repozytorium społeczności Menedżera pakietów systemu Windows",
+ "searchWinGetStoreRepositoryLinkText": "Wyszukaj w aplikacji sklepu Microsoft Store (nowa)",
+ "selectAAD": "Wybierz atrybut Microsoft Entra",
+ "selectAppFileLabel": "Wybierz plik",
+ "selectAppFileLinkText": "Wybierz plik pakietu aplikacji",
+ "selectAppFileToUpdateLabel": "Wybierz plik do zaktualizowania",
+ "selectAuthMethod": "Wybierz metodę uwierzytelniania",
+ "selectAuthType": "Wybierz typ uwierzytelniania",
+ "selectCatalogAppLabel": "Wybierz aplikację",
+ "selectCatalogAppLinkText": "Wyszukaj w wykazie aplikacji dla przedsiębiorstw",
+ "selectCertificate": "Wybierz certyfikat",
+ "signAllEmails": "Podpisuj wszystkie wiadomości e-mail",
+ "signingCertificates": "Certyfikaty podpisywania",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Opis pakietu",
+ "suiteNameLabel": "Nazwa pakietu",
+ "targetApplicationBundleIdentifier": "Identyfikator pakietu aplikacji docelowej",
+ "targetedPlatformsLabel": "Platforma docelowa",
+ "tasks": "Zadania",
+ "threeDays": "Trzy dni",
+ "totalLicenseCount": "Łączna liczba licencji",
+ "twoWeeks": "Dwa tygodnie",
+ "unifiedAssignmentsLabel": "Przypisz do:",
+ "unlimited": "Nieograniczone",
+ "urlHint": "Wprowadź prawidłowy adres URL",
+ "useManagedBrowserHint": "Tylko systemy Android i iOS. Dowiedz się więcej",
+ "useManagedBrowserLabel": "Wymagaj zarządzanej przeglądarki do otworzenia tego linku",
+ "userPrinicipalName": "Nazwa główna użytkownika",
+ "username": "Nazwa użytkownika",
+ "usernameAttribute": "Atrybut nazwy użytkownika z Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Określ główną nazwę użytkownika dla profilu poczty e-mail, która będzie używana do uwierzytelniania konta",
+ "usernamePassword": "Nazwa użytkownika i hasło",
+ "webAppUrlHint": "Wprowadź prawidłowy adres URL zaczynający się od http:// lub https://",
+ "webAppUrlLabel": "Adres URL aplikacji",
+ "webAppUrlSizeHint": "Maksymalna długość adresu URL aplikacji to 1024 znaków",
+ "windowsUrlValidation": "Podaj prawidłowy adres URL podobny do https://www.microsoft.com/pl-pl/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "Wprowadzone dane XML",
+ "xmlFormatInvalid": "Format zasad XML jest nieprawidłowy.",
+ "xmlTooLarge": "Rozmiar wejściowy musi być mniejszy niż 1 MB."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Na użytkowników, których to dotyczy, zostanie nałożone ograniczenie przypisanej strony urzędu współzarządzania o kolejnym najwyższym priorytecie lub domyślnej strony urzędu współzarządzania, jeśli nie przypisano żadnej innej takiej strony.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Urząd współzarządzania",
"settingDescription": "Ustawienia współzarządzania określają, kto jest właścicielem obciążeń."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Aplikacja systemu Android Enterprise",
- "androidForWorkApp": "Aplikacja zarządzanego sklepu Google Play",
- "androidLobApp": "Aplikacja biznesowa dla systemu Android",
- "androidStoreApp": "Aplikacja w sklepie dla systemu Android",
- "builtInAndroid": "Wbudowana aplikacja systemu Android",
- "builtInApp": "Aplikacja wbudowana",
- "builtInIos": "Wbudowana aplikacja systemu iOS",
- "default": "",
- "iosIPadOSWebClip": "Klip internetowy systemu iOS/iPadOS",
- "iosLobApp": "Aplikacja biznesowa dla systemu iOS",
- "iosStoreApp": "Aplikacja w sklepie dla systemu iOS",
- "iosVppApp": "Aplikacja nabyta w programie zakupów zbiorczych dla systemu iOS",
- "lineOfBusinessApp": "Aplikacja biznesowa",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Przeglądarka Microsoft Edge (macOS)",
- "macOSLobApp": "Aplikacja biznesowa systemu macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Aplikacje platformy Microsoft 365 (system macOS)",
- "macOSPkgApp": "Aplikacja systemu macOS (PKG)",
- "macOSWebClip": "Klip internetowy dla systemu macOS",
- "macOsVppApp": "Aplikacja nabyta w programie zakupów zbiorczych dla systemu macOS",
- "managedAndroidLobApp": "Zarządzana aplikacja biznesowa dla systemu Android",
- "managedAndroidStoreApp": "Zarządzana aplikacja w sklepie dla systemu Android",
- "managedGooglePlayApp": "Aplikacja zarządzanego sklepu Google Play",
- "managedGooglePlayPrivateApp": "Prywatna aplikacja zarządzanej usługi Google Play",
- "managedGooglePlayWebApp": "Link internetowy do zarządzanej usługi Google Play",
- "managedIosLobApp": "Zarządzana aplikacja biznesowa dla systemu iOS",
- "managedIosStoreApp": "Zarządzana aplikacja w sklepie dla systemu iOS",
- "microsoftStoreForBusinessApp": "Aplikacja ze sklepu Microsoft Store dla Firm",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store dla Firm",
- "officeSuiteApp": "Aplikacje Microsoft 365 (Windows 10 i nowszy)",
- "webApp": "Link sieci Web",
- "windowsAppXLobApp": "Aplikacja biznesowa AppX systemu Windows",
- "windowsClassicApp": "Aplikacja systemu Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (system Windows 10 i nowszy)",
- "windowsMobileMsiLobApp": "Aplikacja biznesowa MSI systemu Windows",
- "windowsPhone81AppXBundleLobApp": "Aplikacja biznesowa AppX systemu Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "Aplikacja biznesowa AppX systemu Windows Phone 8.1",
- "windowsPhone81StoreApp": "Aplikacja ze Sklepu Windows Phone 8.1",
- "windowsPhoneXapLobApp": "Aplikacja biznesowa XAP systemu Windows Phone",
- "windowsStoreApp": "Aplikacja sklepu Microsoft Store (starsza wersja)",
- "windowsUniversalAppXLobApp": "Uniwersalna aplikacja biznesowa AppX systemu Windows",
- "windowsUniversalLobApp": "Uniwersalna aplikacja biznesowa systemu Windows",
- "windowsWebApp": "Link internetowy systemu Windows"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Proponowane",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrajn",
+ "countryNameZA": "Republika Południowej Afryki",
+ "countryNameJO": "Jordania",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Czechy",
+ "countryNameLT": "Litwa",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ekwador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "SRA Hongkong",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Arabia Saudyjska",
+ "countryNamePG": "Papua-Nowa Gwinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "Indie",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Rumunia",
+ "countryNameKZ": "Kazachstan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Gruzja",
+ "countryNameTT": "Trynidad i Tobago",
+ "countryNameMP": "Mariany Północne",
+ "countryNameMV": "Malediwy",
+ "countryNameFI": "Finlandia",
+ "countryNameNO": "Norwegia",
+ "countryNameEE": "Estonia",
+ "countryNameVE": "Wenezuela",
+ "countryNameUZ": "Uzbekistan",
+ "countryNameME": "Czarnogóra",
+ "countryNameTJ": "Tadżykistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "Francja",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Włochy",
+ "countryNameAZ": "Azerbejdżan",
+ "countryNameKG": "Kirgistan",
+ "countryNameWF": "Wallis i Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falklandy (Malwiny)",
+ "countryNameGY": "Gujana",
+ "countryNameSS": "Sudan Południowy",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Syria",
+ "countryNameMD": "Mołdawia",
+ "countryNameVC": "Saint Vincent i Grenadyny",
+ "countryNameID": "Indonezja",
+ "countryNameRE": "Reunion",
+ "countryNameER": "Erytrea",
+ "countryNameMK": "Macedonia Północna",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Polinezja Francuska",
+ "countryNameKY": "Kajmany",
+ "countryNameIO": "Brytyjskie Terytorium Oceanu Indyjskiego",
+ "countryNameRU": "Rosja",
+ "countryNameMA": "Maroko",
+ "countryNameAU": "Australia",
+ "countryNameBO": "Boliwia",
+ "countryNameVA": "Watykan",
+ "countryNameVG": "Brytyjskie Wyspy Dziewicze",
+ "countryNameFM": "Mikronezja",
+ "countryNameAQ": "Antarktyka",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brazylia",
+ "countryNameIS": "Islandia",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bułgaria",
+ "countryNamePR": "Portoryko",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamy",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "SRA Makau",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "Samoa Amerykańskie",
+ "countryNameBQ": "Bonaire, Sint Eustatius i Saba",
+ "countryNameMF": "Saint-Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Nowa Kaledonia",
+ "countryNameAC": "Wyspa Wniebowstąpienia",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladesz",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Kanada",
+ "countryNameSH": "Święta Helena",
+ "countryNameYT": "Majotta",
+ "countryNameMN": "Mongolia",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Kamerun",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japonia",
+ "countryNameCY": "Cypr",
+ "countryNameCD": "Demokratyczna Republika Konga",
+ "countryNameTN": "Tunezja",
+ "countryNameTR": "Turcja",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Szwecja",
+ "countryNameXK": "Kosowo",
+ "countryNameKH": "Kambodża",
+ "countryNamePL": "Polska",
+ "countryNameDZ": "Algieria",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominika",
+ "countryNameEG": "Egipt",
+ "countryNameGF": "Gujana Francuska",
+ "countryNameNZ": "Nowa Zelandia",
+ "countryNamePS": "Autonomia Palestyńska",
+ "countryNameIL": "Izrael",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Grecja",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauretania",
+ "countryNameVI": "Wyspy Dziewicze Stanów Zjednoczonych",
+ "countryNameGQ": "Gwinea Równikowa",
+ "countryNameMX": "Meksyk",
+ "countryNameDJ": "Dżibuti",
+ "countryNameGN": "Gwinea",
+ "countryNameCN": "Chiny",
+ "countryNameMZ": "Mozambik",
+ "countryNameBV": "Wyspa Bouveta",
+ "countryNameNF": "Wyspa Norfolk",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "Georgia Południowa i Sandwich Południowy",
+ "countryNameRS": "Serbia",
+ "countryNameCC": "Wyspy Kokosowe",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Niemcy",
+ "countryNameCG": "Republika Konga",
+ "countryNameKW": "Kuwejt",
+ "countryNameMH": "Wyspy Marshalla",
+ "countryNameVN": "Wietnam",
+ "countryNameBY": "Białoruś",
+ "countryNameMY": "Malezja",
+ "countryNameST": "Wyspy Świętego Tomasza i Książęca",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Czad",
+ "countryNameCX": "Wyspa Bożego Narodzenia",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Gwinea Bissau",
+ "countryNameUA": "Ukraina",
+ "countryNameCU": "Kuba",
+ "countryNameCO": "Kolumbia",
+ "countryNameNI": "Nikaragua",
+ "countryNameHR": "Chorwacja",
+ "countryNameSC": "Seszele",
+ "countryNameNL": "Holandia",
+ "countryNameUM": "Odległe Mniejsze Wyspy Stanów Zjednoczonych",
+ "countryNameIM": "Wyspa Man",
+ "countryNameFJ": "Fidżi",
+ "countryNameSR": "Surinam",
+ "countryNameGT": "Gwatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "Zjednoczone Królestwo",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Słowenia",
+ "countryNameAM": "Armenia",
+ "countryNameAR": "Argentyna",
+ "countryNamePM": "Saint-Pierre i Miquelon",
+ "countryNameTF": "Francuskie Terytoria Południowe i Antarktyczne",
+ "countryNameDO": "Dominikana",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martynika",
+ "countryNamePT": "Portugalia",
+ "countryNameCF": "Republika Środkowoafrykańska",
+ "countryNameBE": "Belgia",
+ "countryNameKM": "Komory",
+ "countryNameLY": "Libia",
+ "countryNameIE": "Irlandia",
+ "countryNameKP": "Koreańska Republika Ludowo-Demokratyczna",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Słowacja",
+ "countryNameTC": "Turks i Caicos",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Jemen",
+ "countryNameBA": "Bośnia i Hercegowina",
+ "countryNameGP": "Gwadelupa",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Irak",
+ "countryNameSJ": "Svalbard i Jan Mayen",
+ "countryNameAX": "Wyspy Alandzkie",
+ "countryNameKE": "Kenia",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermudy",
+ "countryNameFO": "Wyspy Owcze",
+ "countryNameBL": "Saint Barthélemy",
+ "countryNameLB": "Liban",
+ "countryNameJM": "Jamajka",
+ "countryNameAF": "Afganistan",
+ "countryNameES": "Hiszpania",
+ "countryNameMC": "Monako",
+ "countryNameSG": "Singapur",
+ "countryNameAL": "Albania",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Wybrzeże Kości Słoniowej (Côte d’Ivoire)",
+ "countryNameTW": "Tajwan",
+ "countryNameUY": "Urugwaj",
+ "countryNameCK": "Wyspy Cooka",
+ "countryNameTH": "Tajlandia",
+ "countryNameHM": "Wyspy Heard i McDonalda",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "Stany Zjednoczone",
+ "countryNameAT": "Austria",
+ "countryNameKR": "Korea Południowa",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Dania",
+ "countryNameSV": "Salwador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Etiopia",
+ "countryNameMG": "Madagaskar",
+ "countryNameCR": "Kostaryka",
+ "countryNameLU": "Luksemburg",
+ "countryNameQA": "Katar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Wyspy Salomona",
+ "countryNameAE": "Zjednoczone Emiraty Arabskie",
+ "countryNameAD": "Andora",
+ "countryNameCV": "Wyspy Zielonego Przylądka",
+ "countryNameAG": "Antigua i Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Węgry",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Szwajcaria",
+ "countryNamePN": "Pitcairn",
+ "countryNameGL": "Grenlandia",
+ "countryNamePH": "Filipiny",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts i Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Łotwa",
+ "countryNamePY": "Paragwaj"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Autor",
+ "template": "Nazwa szablonu"
+ },
+ "Row": {
+ "ariaLabel": "wiersz {0} z {1} kolumny {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Rozpocznij od podstaw i wybierz odpowiednie właściwości z biblioteki dostępnych właściwości spisu"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Zacznij od zera i wybierz żądane ustawienia z biblioteki dostępnych ustawień",
+ "title": "Wykaz ustawień"
+ },
+ "Templates": {
+ "subtitle": "Szablony zawierają grupy ustawień uporządkowane według funkcji. Użyj szablonu, jeśli nie chcesz ręcznie tworzyć zasad lub chcesz skonfigurować urządzenia pod kątem dostępu do sieci firmowych, na przykład skonfigurować sieć WiFi lub VPN.",
+ "title": "Szablony"
+ },
+ "noData": "Nie znaleziono żadnych szablonów zasad"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Ustawienia SmartScreen zalecane przez aplikację Microsoft Edge: szablon konfiguracji systemu Windows 10 w chmurze. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Wykrywanie i reagowanie dotyczące punktów końcowych"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "Izolacja aplikacji i przeglądarki",
+ "aSRApplicationControl": "Kontrola aplikacji",
+ "aSRAttackSurfaceReduction": "Reguły zmniejszania obszaru podatnego na ataki",
+ "aSRDeviceControl": "Kontrola urządzeń",
+ "aSRExploitProtection": "Ochrona przed programami wykorzystującymi luki w zabezpieczeniach",
+ "aSRWebProtection": "Ochrona w Internecie (starsza wersja Microsoft Edge)",
+ "aVExclusions": "Wykluczenia programu Microsoft Defender Antivirus",
+ "antivirus": "Program antywirusowy Microsoft Defender",
+ "cloudPC": "Plan bazowy zabezpieczeń systemu Windows 365",
+ "default": "Zabezpieczenia punktu końcowego",
+ "defenderTest": "Wersja demonstracyjna usługi Microsoft Defender for Endpoint",
+ "diskEncryption": "BitLocker",
+ "eDR": "Wykrywanie i reagowanie dotyczące punktów końcowych",
+ "edgeSecurityBaseline": "Punkt odniesienia programu Microsoft Edge",
+ "edgeSecurityBaselinePreview": "Wersja zapoznawcza: punkt odniesienia programu Microsoft Edge",
+ "editionUpgradeConfiguration": "Uaktualnianie wersji i przełączanie trybu",
+ "firewall": "Zapora systemu Windows",
+ "firewallRules": "Reguły zapory systemu Windows",
+ "identityProtection": "Ochrona konta",
+ "identityProtectionPreview": "Ochrona konta (wersja zapoznawcza)",
+ "mDMSecurityBaseline1810": "Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych z października 2018 r.",
+ "mDMSecurityBaseline1810Preview": "Wersja zapoznawcza: Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych z października 2018 r.",
+ "mDMSecurityBaseline1810PreviewBeta": "Wersja zapoznawcza: plan bazowy zabezpieczeń MDM dla systemu Windows 10 z października 2018 r. (wersja beta)",
+ "mDMSecurityBaseline1906": "Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych z maja 2019 r.",
+ "mDMSecurityBaseline2004": "Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych wersji z sierpnia 2020 r.",
+ "mDMSecurityBaseline2101": "Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych wersji z grudnia 2020 r.",
+ "macOSAntivirus": "Oprogramowanie antywirusowe",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "Zapora systemu macOS",
+ "microsoftDefenderBaseline": "Punkt odniesienia usługi Microsoft Defender for Endpoint",
+ "office365Baseline": "Punkt odniesienia dla usługi Microsoft Office O365",
+ "office365BaselinePreview": "Podgląd: punkt odniesienia dla usługi Microsoft Office O365",
+ "securityBaselines": "Punkty odniesienia zabezpieczeń",
+ "test": "Testuj szablon",
+ "testFirewallRulesSecurityTemplateName": "Reguły zapory systemu Windows (test)",
+ "testIdentityProtectionSecurityTemplateName": "Ochrona konta (test)",
+ "windowsSecurityExperience": "Środowisko zabezpieczeń systemu Windows"
+ },
+ "Firewall": {
+ "mDE": "Zapora systemu Windows"
+ },
+ "FirewallRules": {
+ "mDE": "Reguły zapory systemu Windows"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "Ustawienia przenoszenia znanych folderów usługi OneDrive: Windows 10 w szablonie konfiguracji chmury. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Ochrona konta",
+ "administrativeTemplates": "Szablony administracyjne",
+ "androidCompliancePolicy": "Zasady dotyczące zgodności dla systemu Android",
+ "aospDeviceOwnerCompliancePolicy": "Zasady zgodności dla systemu Android (AOSP)",
+ "applicationControl": "Kontrola aplikacji dla biznesu",
+ "attackSurfaceReductionRules": "Reguły zmniejszenia obszaru ataków",
+ "bitlocker": "BitLocker",
+ "custom": "Niestandardowe",
+ "deliveryOptimization": "Optymalizacja dostarczania",
+ "derivedPersonalIdentityVerificationCredential": "Pochodne poświadczenia",
+ "deviceControl": "Kontrola urządzenia",
+ "deviceFeatures": "Funkcje urządzenia",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Blokada urządzenia",
+ "deviceOwner": "Profil służbowy w pełni zarządzany, dedykowany i należący do firmy",
+ "deviceRestrictions": "Ograniczenia dotyczące urządzeń",
+ "deviceRestrictionsWindows10Team": "Ograniczenia dotyczące urządzeń (Windows 10 Team)",
+ "domainJoinPreview": "Przyłączanie do domeny",
+ "editionUpgradeAndModeSwitch": "Uaktualnianie wersji i przełączanie trybu",
+ "education": "Edukacja",
+ "email": "Wiadomość e-mail",
+ "emailSamsungKnoxOnly": "Poczta e-mail (tylko rozwiązanie Samsung KNOX)",
+ "endpointProtection": "Ochrona punktu końcowego",
+ "expeditedCheckin": "Konfiguracja zarządzania urządzeniami przenośnymi",
+ "exploitProtection": "Exploit Protection",
+ "extensions": "Rozszerzenia",
+ "hardwareConfigurations": "Konfiguracje systemu BIOS i inny ustawień",
+ "identityProtection": "Ochrona tożsamości",
+ "iosCompliancePolicy": "Zasady dotyczące zgodności dla systemu iOS",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Członkostwo użytkownika lokalnego w grupie",
+ "macCompliancePolicy": "Zasady dotyczące zgodności dla komputerów Mac",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Aplikacje Microsoft 365 dla planu bazowego zabezpieczeń przedsiębiorstwa",
+ "microsoftDefenderAntivirus": "Program antywirusowy Microsoft Defender",
+ "microsoftDefenderAntivirusexclusions": "Wykluczenia programu Microsoft Defender Antivirus",
+ "microsoftDefenderAtpWindows10Desktop": "Ochrona punktu końcowego w usłudze Microsoft Defender (urządzenia stacjonarne z systemem Windows 10 lub nowszym)",
+ "microsoftDefenderFirewallRules": "Reguły zapory systemu Windows",
+ "microsoftDefenderforEndpointSecurityBaseline": "Punkt odniesienia zabezpieczeń usługi Microsoft Defender dla punktu końcowego",
+ "microsoftEdgeBaseline": "Plan bazowy zabezpieczeń dla przeglądarki Microsoft Edge",
+ "mxProfileZebraOnly": "Profil MX (tylko Zebra)",
+ "networkBoundary": "Granica sieci",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Przesłoń zasady grupy",
+ "pkcsCertificate": "Certyfikat PKCS",
+ "pkcsImportedCertificate": "Zaimportowany certyfikat PKCS",
+ "preferenceFile": "Plik preferencji",
+ "presets": "Ustawienia wstępne",
+ "scepCertificate": "Certyfikat SCEP",
+ "secureAssessmentEducation": "Bezpieczna ocena (edukacja)",
+ "securityBaselineForHololens2Advanced": "Zaawansowany punkt odniesienia zabezpieczeń dla HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standardowy punkt odniesienia zabezpieczeń dla HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Plan bazowy zabezpieczeń dla przeglądarki Microsoft Edge",
+ "settingsCatalog": "Katalog ustawień",
+ "sharedMultiUserDevice": "Udostępnione urządzenie obsługujące wielu użytkowników",
+ "softwareUpdates": "Aktualizacje oprogramowania",
+ "trustedCertificate": "Certyfikat zaufany",
+ "unknown": "Nieznany",
+ "unsupported": "Nieobsługiwane",
+ "vpn": "Sieć VPN",
+ "wiFi": "Sieć Wi-Fi",
+ "wiFiImport": "Importowanie sieci Wi-Fi",
+ "windows10CompliancePolicy": "Zasady zgodności systemu Windows 10/11",
+ "windows10MobileCompliancePolicy": "Zasady dotyczące zgodności dla systemu Windows 10 Mobile",
+ "windows10XScep": "Certyfikat SCEP — TEST",
+ "windows10XTrustedCertificate": "Zaufany certyfikat — TEST",
+ "windows10XVPN": "VPN — TEST",
+ "windows10XWifi": "WIFI — TEST",
+ "windows11SecurityBaseline": "Punkt odniesienia zabezpieczeń dla systemu Windows 10 i nowszego",
+ "windows365SecurityBaseline": "Plan bazowy zabezpieczeń systemu Windows 365",
+ "windows8CompliancePolicy": "Zasady dotyczące zgodności dla systemu Windows 8",
+ "windowsHealthMonitoring": "Monitorowanie kondycji systemu Windows",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Zasady dotyczące zgodności dla systemu Windows Phone",
+ "windowsUpdateforBusiness": "Windows Update dla Firm",
+ "wiredNetwork": "Sieć przewodowa",
+ "workProfile": "Osobisty profil służbowy"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Stopniowo udostępniaj aktualizację",
+ "immediateStart": "Udostępnij aktualizację tak szybko, jak to możliwe",
+ "startDateOnly": "Udostępnij aktualizację w określonym dniu"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Odrzuć automatycznie",
+ "autoGrant": "Automatyczne udzielaj",
+ "prompt": "Monituj"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Dostęp do lokalizacji (ogólnej)",
+ "accessFineLocation": "Dostęp do lokalizacji (dokładnej)",
+ "addVoicemail": "Dodawanie poczty głosowej",
+ "bodySensors": "Zezwalanie na dostęp do danych z czujników ciała",
+ "bodySensorsBackground": "Zezwalaj na dane z czujników treści w tle",
+ "callPhone": "Wykonywanie połączeń telefonicznych",
+ "camera": "Kamera",
+ "getAccounts": "Uzyskiwanie kont",
+ "nearbyDevices": "Urządzenia w pobliżu",
+ "nearbyWifiDevices": "Urządzenia w pobliżu sieci Wi-Fi",
+ "postNotifications": "Opublikuj powiadomienia",
+ "processOutgoingCalls": "Przetwarzanie połączeń wychodzących",
+ "readCalendar": "Kalendarz (odczytywanie)",
+ "readCallLog": "Dziennik rozmów (odczytywanie)",
+ "readContacts": "Kontakty (odczytywanie)",
+ "readExternalStorage": "Magazyn zewnętrzny (odczytywanie)",
+ "readMediaAudio": "Dźwięk multimedialny (odczyt)",
+ "readMediaImages": "Obrazy multimedialne (odczyt)",
+ "readMediaVideo": "Multimedia wideo (odczyt)",
+ "readPhoneState": "Stan telefonu (odczytywanie)",
+ "readSMS": "Wiadomości SMS (odczytywanie)",
+ "receiveMMS": "Wiadomości MMS (odbieranie)",
+ "receiveSMS": "Wiadomości SMS (odbieranie)",
+ "receiveWAPPush": "Wiadomości wypychane WAP (odbieranie)",
+ "recordAudio": "Nagrywanie dźwięku",
+ "sendSMS": "Wiadomości SMS (wysyłanie)",
+ "useSIP": "Korzystanie z usługi SIP",
+ "writeCalendar": "Kalendarz (zapisywanie)",
+ "writeCallLog": "Dziennik rozmów (zapisywanie)",
+ "writeContacts": "Kontakty (zapisywanie)",
+ "writeExternalStorage": "Magazyn zewnętrzny (zapisywanie)"
+ },
+ "RemoveDialog": {
+ "description": "Czy na pewno chcesz usunąć uprawnienia?",
+ "title": "Usuń"
+ },
+ "TableHeader": {
+ "permission": "Uprawnienie",
+ "permissionGroup": "Grupa uprawnień",
+ "permissionName": "Nazwa uprawnienia",
+ "permissionState": "Stan uprawnienia"
+ },
+ "addButtonLabel": "+Dodaj",
+ "addPermissionTableDescription": "Podaj uprawnienia, które chcesz przesłonić. Jeśli nie zostaną one wybrane/podane jawnie, będzie miało zastosowanie zachowanie domyślne.",
+ "addPermissionsTitle": "Dodaj uprawnienia",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Dowiedz się więcej o uprawnieniach w środowisku uruchomieniowym systemu Android",
+ "permissionTableDescription": "Uprawnienia przyznane tutaj przesłonią zasady „Domyślne uprawnienia aplikacji” dla wybranych aplikacji.",
+ "permissionsTitle": "Uprawnienia"
+ },
+ "AssignmentAction": {
+ "exclude": "Wykluczone",
+ "include": "Zawarte",
+ "includeAllDevicesVirtualGroup": "Zawarte",
+ "includeAllUsersVirtualGroup": "Zawarte"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Domyślne używanie funkcji Microsoft Search",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype dla firm",
+ "oneDrive": "Aplikacja klasyczna OneDrive",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "Plik lub folder jako wybrane wymaganie.",
+ "pathToolTip": "Pełna ścieżka pliku lub folderu do wykrycia.",
+ "property": "Właściwość",
+ "valueToolTip": "Wybierz wartość wymagania, która jest zgodna z wybraną metodą wykrywania. W przypadku metod wykrywania opartych na dacie i godzinie należy wprowadzić datę i godzinę w formacie lokalnym."
+ },
+ "GridColumns": {
+ "pathOrScript": "Ścieżka/skrypt",
+ "type": "Typ"
+ },
+ "Registry": {
+ "keyPath": "Ścieżka klucza",
+ "keyPathTooltip": "Pełna ścieżka wpisu rejestru zawierającego wartość jako wymaganie.",
+ "operator": "Operator",
+ "operatorTooltip": "Wybierz operator porównania.",
+ "registryRequirement": "Wymaganie klucza rejestru",
+ "registryRequirementTooltip": "Wybierz porównanie wymagania klucza rejestru.",
+ "valueName": "Nazwa wartości",
+ "valueNameTooltip": "Nazwa wymaganej wartości rejestru."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Plik",
+ "registry": "Rejestr",
+ "script": "Skrypt"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Wartość logiczna",
+ "dateTime": "Data i godzina",
+ "float": "Zmiennoprzecinkowe",
+ "integer": "Liczba całkowita",
+ "string": "Ciąg",
+ "version": "Wersja"
+ },
+ "duplicateName": "Nazwa skryptu {0} jest już w użyciu. Wprowadź inną nazwę.",
+ "enforceSignatureCheck": "Wymuszaj sprawdzanie podpisu skryptu",
+ "enforceSignatureCheckTooltip": "Wybierz opcję „Tak”, aby sprawdzić, czy skrypt jest podpisany przez zaufanego wydawcę, co pozwoli na uruchomienie skryptu bez wyświetlania ostrzeżeń ani monitów. Działanie skryptu nie będzie blokowane. Wybierz opcję „Nie” (domyślna), aby uruchomienie skryptu wymagało potwierdzenia użytkownika końcowego, ale bez weryfikacji podpisu.",
+ "loggedOnCredentials": "Uruchom ten skrypt, używając poświadczeń zalogowanego użytkownika",
+ "loggedOnCredentialsTooltip": "Uruchom skrypt przy użyciu poświadczeń urządzenia, których użyto do logowania.",
+ "operatorTooltip": "Wybierz operator porównania wymagania.",
+ "requirementMethod": "Wybierz wyjściowy typ danych",
+ "requirementMethodTooltip": "Wybierz typ danych używany podczas określania wymagań dopasowania wykrywania.",
+ "scriptContent": "Zawartość skryptu",
+ "scriptFile": "Plik skryptu",
+ "scriptFileTooltip": "Wybierz skrypt programu PowerShell, który będzie wykrywać obecność aplikacji na kliencie. Jeśli aplikacja zostanie wykryta, proces wymagania zwróci kod zakończenia o wartości 0 i zapisze wartość ciągu w wyjściu STDOUT.",
+ "scriptName": "Nazwa skryptu",
+ "value": "Wartość",
+ "valueTooltip": "Wybierz wartość wymagania, która jest zgodna z wybraną metodą wykrywania. W przypadku metod wykrywania opartych na dacie i godzinie należy wprowadzić datę i godzinę w formacie lokalnym."
+ },
+ "bladeTitle": "Dodawanie reguły wymagania",
+ "createRequirementHeader": "Utwórz wymaganie.",
+ "header": "Skonfiguruj dodatkowe reguły wymagań",
+ "label": "Dodatkowe reguły wymagań",
+ "noRequirementsSelectedPlaceholder": "Nie określono żadnych wymagań.",
+ "requirementType": "Typ wymagania",
+ "requirementTypeTooltip": "Wybierz typ metody wykrywania służącej do określania sposobu walidacji wymagania."
+ },
+ "architectures": "Architektura systemu operacyjnego",
+ "architecturesTooltip": "Wybierz architektury potrzebne do zainstalowania aplikacji.",
+ "bladeTitle": "Wymagania",
+ "diskSpace": "Wymagane miejsce na dysku (MB)",
+ "diskSpaceTooltip": "Wymagana ilość wolnego miejsca na dysku systemowym, aby zainstalować aplikację.",
+ "header": "Określ wymagania, które urządzenia muszą spełniać przed zainstalowaniem aplikacji:",
+ "maximumTextFieldValue": "Wartość maksymalna to {0}.",
+ "minimumCpuSpeed": "Minimalna wymagana szybkość procesora CPU (MHz)",
+ "minimumCpuSpeedTooltip": "Minimalna szybkość procesora CPU wymagana do zainstalowania aplikacji.",
+ "minimumLogicalProcessors": "Minimalna wymagana liczba procesorów logicznych",
+ "minimumLogicalProcessorsTooltip": "Minimalna liczba procesorów logicznych wymagana do zainstalowania aplikacji.",
+ "minimumOperatingSystem": "Minimalna wersja systemu operacyjnego",
+ "minimumOperatingSystemTooltip": "Wybierz minimalną wersję systemu operacyjnego wymaganą do zainstalowania aplikacji.",
+ "minumumTextFieldValue": "Wartość musi być równa co najmniej {0}.",
+ "physicalMemory": "Wymagana pamięć fizyczna (MB)",
+ "physicalMemoryTooltip": "Pamięć fizyczna (RAM) wymagana do zainstalowania aplikacji.",
+ "selectorLabel": "Wymagania",
+ "validNumber": "Wprowadź poprawną liczbę."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filtruj",
+ "assignmentFilterTypeColumnHeader": "Tryb filtru",
+ "assignmentToast": "Powiadomienia użytkownika końcowego",
+ "assignmentTypeTableHeader": "TYP PRZYPISANIA",
+ "autoUpdate": "Automatyczna aktualizacja",
+ "deadlineTimeColumnLabel": "Ostateczny termin instalacji",
+ "deliveryOptimizationPriorityHeader": "Priorytet optymalizacji dostarczania",
+ "groupTableHeader": "Grupa",
+ "installContextLabel": "Kontekst instalacji",
+ "isRemovable": "Zainstaluj jako wymienne",
+ "licenseTypeLabel": "Typ licencji",
+ "modeTableHeader": "Tryb grupy",
+ "policySet": "Zestaw zasad",
+ "preventAutoAppUpdate": "Zapobiegaj automatycznym aktualizacjom aplikacji",
+ "preventManagedAppBackup": "Zapobiegaj wykonywaniu kopii zapasowej aplikacji iCloud",
+ "restartGracePeriodHeader": "Okres prolongaty ponownego uruchomienia",
+ "startTimeColumnLabel": "Dostępność",
+ "tracks": "Ścieżki",
+ "uninstallOnRemoval": "Odinstaluj podczas usuwania urządzenia",
+ "updateMode": "Aktualizuj priorytet",
+ "vPN": "Sieć VPN"
+ },
+ "AppType": {
+ "aADWebApp": "Aplikacja internetowa usługi AAD",
+ "androidEnterpriseSystemApp": "Aplikacja systemu Android Enterprise",
+ "androidForWorkApp": "Aplikacja zarządzanego sklepu Google Play",
+ "androidLobApp": "Aplikacja biznesowa dla systemu Android",
+ "androidStoreApp": "Aplikacja w sklepie dla systemu Android",
+ "builtInAndroid": "Wbudowana aplikacja systemu Android",
+ "builtInApp": "Aplikacja wbudowana",
+ "builtInIos": "Wbudowana aplikacja systemu iOS",
+ "iosIPadOSWebClip": "Klip internetowy z systemem iOS/iPadOS",
+ "iosLobApp": "Aplikacja biznesowa dla systemu iOS",
+ "iosStoreApp": "Aplikacja w sklepie dla systemu iOS",
+ "iosVppApp": "Aplikacja nabyta w programie zakupów zbiorczych dla systemu iOS",
+ "lineOfBusinessApp": "Aplikacja biznesowa",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Aplikacja biznesowa systemu macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Pakiet Office dla systemu macOS",
+ "macOSPkgApp": "Aplikacja systemu macOS (PKG)",
+ "macOSWebClip": "Klip internetowy dla systemu macOS",
+ "macOsVppApp": "Aplikacja nabyta w programie zakupów zbiorczych dla systemu macOS",
+ "managedAndroidLobApp": "Zarządzana aplikacja biznesowa dla systemu Android",
+ "managedAndroidStoreApp": "Zarządzana aplikacja w sklepie dla systemu Android",
+ "managedGooglePlayApp": "Aplikacja zarządzanego sklepu Google Play",
+ "managedGooglePlayPrivateApp": "Prywatna aplikacja zarządzanej usługi Google Play",
+ "managedGooglePlayWebApp": "Link internetowy do zarządzanej usługi Google Play",
+ "managedIosLobApp": "Zarządzana aplikacja biznesowa dla systemu iOS",
+ "managedIosStoreApp": "Zarządzana aplikacja w sklepie dla systemu iOS",
+ "microsoftStoreForBusinessApp": "Aplikacja ze sklepu Microsoft Store dla Firm",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store dla Firm",
+ "officeAddIn": "Dodatek pakietu Office",
+ "officeSuiteApp": "Aplikacje Microsoft 365 (Windows 10 i nowszy)",
+ "sharePointApp": "Aplikacja programu SharePoint",
+ "teamsApp": "Aplikacja Teams",
+ "webApp": "Link sieci Web",
+ "win32CatalogApp": "Aplikacja katalogowa systemu Windows (Win32)",
+ "winGetPublicApp": "Repozytorium społeczności Menedżera pakietów systemu Windows",
+ "winGetStoreApp": "Aplikacja sklepu Microsoft Store (nowa)",
+ "windowsAppXLobApp": "Aplikacja biznesowa AppX systemu Windows",
+ "windowsClassicApp": "Aplikacja systemu Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (system Windows 10 i nowszy)",
+ "windowsMobileMsiLobApp": "Aplikacja biznesowa MSI systemu Windows",
+ "windowsPhone81AppXBundleLobApp": "Aplikacja biznesowa AppX systemu Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "Aplikacja biznesowa AppX systemu Windows Phone 8.1",
+ "windowsPhone81StoreApp": "Aplikacja ze Sklepu Windows Phone 8.1",
+ "windowsPhoneXapLobApp": "Aplikacja biznesowa XAP systemu Windows Phone",
+ "windowsStoreApp": "Aplikacja sklepu Microsoft Store (starsza wersja)",
+ "windowsUniversalAppXLobApp": "Uniwersalna aplikacja biznesowa AppX systemu Windows",
+ "windowsUniversalLobApp": "Uniwersalna aplikacja biznesowa systemu Windows",
+ "windowsWebApp": "Link sieci Web systemu Windows"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Sieć Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Wykluczone",
+ "include": "Dołączone",
+ "includeAllDevicesVirtualGroup": "Dołączone",
+ "includeAllUsersVirtualGroup": "Dołączone"
+ },
+ "AssignmentToast": {
+ "hideAll": "Ukryj wszystkie wyskakujące powiadomienia",
+ "showAll": "Pokaż wszystkie wyskakujące powiadomienia",
+ "showReboot": "Pokaż wyskakujące powiadomienia dotyczące ponownego uruchomienia komputera"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Tak",
+ "notConfigured": "Nie"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Tło",
+ "displayText": "Pobieranie zawartości za {0}",
+ "foreground": "Pierwszy plan",
+ "header": "Priorytet optymalizacji dostarczania"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Instalacja aplikacji może wymusić ponowne uruchomienie urządzenia",
+ "basedOnReturnCode": "Określ zachowanie na podstawie kodów powrotnych",
+ "force": "Usługa Intune wymusi obowiązkowe ponowne uruchomienie urządzenia",
+ "suppress": "Brak określonej akcji"
+ },
+ "FilterType": {
+ "exclude": "Wyklucz",
+ "include": "Dołącz",
+ "none": "Brak"
+ },
+ "InstallIntent": {
+ "available": "Dostępne dla zarejestrowanych urządzeń",
+ "availableWithoutEnrollment": "Dostępne z rejestracją lub bez niej",
+ "notApplicable": "Nie dotyczy",
+ "required": "Wymagane",
+ "uninstall": "Odinstaluj"
+ },
+ "SettingType": {
+ "assignmentType": "Typ przypisania",
+ "deviceLicensing": "Typ licencji",
+ "installContext": "Odinstaluj podczas usuwania urządzenia",
+ "toastSettings": "Powiadomienia użytkownika końcowego",
+ "vpnConfiguration": "Sieć VPN"
+ },
+ "UpdateMode": {
+ "default": "Domyślny",
+ "postponed": "Odłożone",
+ "priority": "Wysoki priorytet"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Niepowodzenie",
+ "hardReboot": "Ponowny rozruch sprzętowy",
+ "retry": "Ponów próbę",
+ "softReboot": "Ponowny rozruch systemowy",
+ "success": "Powodzenie"
+ },
+ "Columns": {
+ "codeType": "Typ kodu",
+ "returnCode": "Kod powrotny"
+ },
+ "bladeTitle": "Kody powrotne",
+ "gridAriaLabel": "Kody powrotne",
+ "header": "Określ kody powrotne w celu wskazania zachowania po instalacji:",
+ "onAddAnnounceMessage": "Kod powrotny dla dodanego elementu {0} z {1}",
+ "onDeleteSuccess": "Kod powrotny {0} — usunięto pomyślnie",
+ "returnCodeAlreadyUsedValidation": "Kod powrotny jest już używany.",
+ "returnCodeMustBeIntegerValidation": "Kod powrotny powinien być liczbą całkowitą.",
+ "returnCodeShouldBeAtLeast": "Kod powrotny powinien wynosić co najmniej {0}.",
+ "returnCodeShouldBeAtMost": "Kod powrotny powinien wynosić co najwyżej {0}.",
+ "selectorLabel": "Kody powrotne"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone i iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Dodaj granicę sieci",
+ "addNetworkBoundaryButton": "Dodaj granicę sieci...",
+ "allowWindowsSearch": "Zezwalaj funkcji Windows Search na przeszukiwanie zaszyfrowanych danych firmowych i aplikacji ze Sklepu",
+ "authoritativeIpRanges": "Lista zakresów adresów IP przedsiębiorstwa jest autorytatywna (nie wykrywaj automatycznie)",
+ "authoritativeProxyServers": "Lista serwerów proxy przedsiębiorstwa jest autorytatywna (nie wykrywaj automatycznie)",
+ "boundaryType": "Typ granicy",
+ "cloudResources": "Zasoby w chmurze",
+ "corporateIdentity": "Tożsamość firmowa",
+ "dataRecoveryCert": "Przekaż certyfikat agenta odzyskiwania danych (DRA, Data Recovery Agent), aby umożliwić odzyskiwanie zaszyfrowanych danych",
+ "editNetworkBoundary": "Edytuj granicę sieci",
+ "enrollmentState": "Stan rejestracji",
+ "iPv4Ranges": "Zakresy adresów IPv4",
+ "iPv6Ranges": "Zakresy adresów IPv6",
+ "internalProxyServers": "Wewnętrzne serwery proxy",
+ "maxInactivityTime": "Maksymalny czas (w minutach) bezczynności urządzenia, po którym urządzenie zostanie zablokowane przy użyciu kodu PIN lub hasła",
+ "maxPasswordAttempts": "Liczba dozwolonych niepowodzeń uwierzytelniania, po przekroczeniu której urządzenie zostanie wyczyszczone",
+ "mdmDiscoveryUrl": "Adres URL odnajdywania zarządzania urządzeniami przenośnymi",
+ "mdmRequiredSettingsInfo": "Te zasady mają zastosowanie tylko do systemu Windows 10 Anniversary Edition i nowszych wersji. Te zasady używają rozwiązania Windows Information Protection (WIP) w celu zastosowania ochrony.",
+ "minimumPinLength": "Ustaw minimalną wymaganą liczbę znaków kodu PIN",
+ "name": "Nazwa",
+ "networkBoundariesGridEmptyText": "Wszystkie dodane granice sieci zostaną tutaj wyświetlone",
+ "networkBoundary": "Granica sieci",
+ "networkDomainNames": "Domeny sieciowe",
+ "neutralResources": "Neutralne zasoby",
+ "passportForWork": "Użyj usługi Windows Hello dla firm jako metody logowania się do systemu Windows",
+ "pinExpiration": "Określ czas (w dniach), przez który użytkownik może używać kodu PIN, zanim jego zmiana będzie wymagana przez system",
+ "pinHistory": "Określ liczbę ostatnich numerów PIN skojarzonych z kontem użytkownika, które nie mogą zostać ponownie użyte",
+ "pinLowercaseLetters": "Skonfiguruj użycie małych liter w kodzie PIN usługi Windows Hello dla firm",
+ "pinSpecialCharacters": "Skonfiguruj użycie znaków specjalnych w kodzie PIN usługi Windows Hello dla firm",
+ "pinUppercaseLetters": "Skonfiguruj użycie wielkich liter w kodzie PIN usługi Windows Hello dla firm",
+ "protectUnderLock": "Blokuj dostęp aplikacji do danych firmowych, gdy urządzenie jest zablokowane. Dotyczy tylko systemu Windows 10 Mobile",
+ "protectedDomainNames": "Domeny chronione",
+ "proxyServers": "Serwery proxy",
+ "requireAppPin": "Wyłącz numer PIN aplikacji, gdy zarządzany jest numer PIN urządzenia",
+ "requiredSettings": "Wymagane ustawienia",
+ "requiredSettingsInfo": "Zmiana zakresu lub usunięcie tych zasad spowoduje odszyfrowanie danych firmowych.",
+ "revokeOnMdmHandoff": "Odwołaj dostęp do chronionych danych po zarejestrowaniu urządzenia w usłudze MDM",
+ "revokeOnUnenroll": "Odwołaj klucze szyfrowania po wyrejestrowaniu",
+ "rmsTemplateForEdp": "Określ identyfikator szablonu do użycia z usługą Azure RMS",
+ "showWipIcon": "Pokaż ikonę ochrony danych przedsiębiorstwa",
+ "type": "Typ",
+ "useRmsForWip": "Użyj usługi Azure RMS na potrzeby funkcji WIP",
+ "value": "Wartość",
+ "weRequiredSettingsInfo": "Te zasady mają zastosowanie tylko do aktualizacji systemu Windows 10 dla twórców i nowszych wersji. Te zasady używają rozwiązania Windows Information Protection (WIP) i zarządzania aplikacjami mobilnymi systemu Windows w celu zastosowania ochrony.",
+ "wipProtectionMode": "Tryb funkcji Windows Information Protection",
+ "withEnrollment": "Z rejestracją",
+ "withoutEnrollment": "Bez rejestracji"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabski",
+ "bulgarian": "Bułgarski",
+ "chineseSimplified": "Chiński (uproszczony)",
+ "chineseTraditional": "Chiński (tradycyjny)",
+ "croatian": "Chorwacki",
+ "czech": "Czeski",
+ "danish": "Duński",
+ "dutch": "Holenderski",
+ "englishUK": "Angielski (Zjednoczone Królestwo)",
+ "englishUS": "Angielski (Stany Zjednoczone)",
+ "estonian": "Estoński",
+ "finnish": "Fiński",
+ "frenchCanada": "Francuski (Kanada)",
+ "frenchFrance": "Francuski (Francja)",
+ "german": "Niemiecki",
+ "greek": "Grecki",
+ "hebrew": "Hebrajski",
+ "hungarian": "Węgierski",
+ "italian": "Włoski",
+ "japanese": "Japoński",
+ "korean": "Koreański",
+ "latvian": "Łotewski",
+ "lithuanian": "Litewski",
+ "norwegian": "Norweski, Bokmål",
+ "polish": "Polski",
+ "portugueseBrazil": "Portugalski (Brazylia)",
+ "portuguesePortugal": "Portugalski (Portugalia)",
+ "romanian": "Rumuński",
+ "russian": "Rosyjski",
+ "serbian": "Serbski",
+ "slovak": "Słowacki",
+ "slovenian": "Słoweński",
+ "spanishMexico": "Hiszpański (Meksyk)",
+ "spanishSpain": "Hiszpański (Hiszpania)",
+ "swedish": "Szwedzki",
+ "thai": "Tajlandia",
+ "turkish": "Turecki",
+ "ukrainian": "Ukraiński"
+ },
+ "Summary": {
+ "placeholder": "Wybierz komunikat powiadomienia z lewej strony, aby wyświetlić podgląd zawartości."
+ },
+ "companyContact": "Pokaż informacje kontaktowe",
+ "companyLogo": "Pokaż logo firmy",
+ "companyName": "Pokaż nazwę firmy",
+ "createEditDescription": "Utwórz lub edytuj szablony powiadomienia.",
+ "createMessage": "Utwórz wiadomość",
+ "deviceDetails": "Pokaż szczegóły urządzenia",
+ "deviceDetailsInfoBox": "To ustawienie jest domyślnie wyłączone, ponieważ pobieranie szczegółów urządzenia może spowodować opóźnienie odbierania wiadomości e-mail z powiadomieniami.",
+ "editImpactInfo": "Edycja tego szablonu komunikatów z powiadomieniem będzie miała wpływ na wszystkie zasady korzystającego z tego szablonu.",
+ "editMessage": "Edytuj wiadomość",
+ "email": "wiadomość e-mail",
+ "emailFooterTitle": "Stopka wiadomość e-mail",
+ "emailHeaderFooterInfo": "Ustawienia nagłówka i stopki wiadomości e-mail dla powiadomień e-mail zależą od ustawień dostosowywania w węźle administratora dzierżawy w programie Endpoint Manager.",
+ "emailHeaderTitle": "Nagłówek wiadomości e-mail",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Konfiguruj ustawienia dostosowywania",
+ "formSubTitle": "Tworzenie lub modyfikowanie wiadomości e-mail z powiadomieniem",
+ "headerFooterSettingsTab": "Ustawienia nagłówka i stopki",
+ "imgPreview": "Podgląd obrazu",
+ "infotext": "Wybierz komunikat powiadomienia. Aby utworzyć nowe powiadomienie, przejdź do obszaru Powiadomienie w sekcji Zarządzaj obciążenia Ustaw zgodność urządzenia.",
+ "iwLink": "Pokaż link do witryny internetowej portalu firmy",
+ "listEmpty": "Brak szablonów komunikatów.",
+ "listEmptySelectOnly": "Brak szablonów komunikatów. Aby utworzyć nowe powiadomienie, przejdź do obszaru Powiadomienia w sekcji Zarządzanie obciążenia Ustaw zgodność urządzenia.",
+ "listSubTitle": "Lista szablonów powiadomień",
+ "listTitle": "Szablony wiadomości z powiadomieniami",
+ "localizedNotificationMessageTemplates": "Zlokalizowane szablony wiadomości z powiadomieniami",
+ "messageAssigned": "Nie można usunąć tego szablonu komunikatu, ponieważ jest on aktualnie używany przez co najmniej jedne zasady zgodności.",
+ "messageCapitalized": "Szablon komunikatu z powiadomieniem",
+ "messageLowercase": "szablon komunikatu z powiadomieniem",
+ "missingDefaultError": "Wybierz szablon domyślny",
+ "notificationMessageTemplates": "Szablony wiadomości z powiadomieniami",
+ "rowValidationError": "Wymagany jest co najmniej jeden szablon wiadomości",
+ "selectDescription": "Wybierz powiadomienie. Aby utworzyć nowe powiadomienie, przejdź do obszaru Powiadomienia w sekcji zarządzania obciążenia Ustaw zgodność urządzenia.",
+ "tenantValueText": "Wartość dzierżawy",
+ "testEmailLabel": "Wyślij podgląd wiadomości e-mail",
+ "localeLabel": "Ustawienia regionalne",
+ "isDefaultLocale": "Domyślne"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Skonfiguruj urządzenia na potrzeby wstępnej aprowizacji.",
+ "title": "Przygotowywanie urządzenia"
+ },
+ "EnrollmentSettings": {
+ "description": "Skonfiguruj ustawienia rejestracji, takie jak blokowanie rejestracji i przypisywanie do użytkowników.",
+ "title": "Ustawienia rejestracji"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Skonfiguruj ustawienia, których użytkownicy mogą używać do odzyskiwania systemu Windows z rozruchowego dysku flash.",
+ "menuTitle": "Konfiguracja odzyskiwania systemu operacyjnego Windows"
+ },
+ "coManagementAuthorityDesc": "Konfiguruj ustawienia współzarządzania na potrzeby integracji z programem Configuration Manager",
+ "coManagementAuthorityTitle": "Ustawienia współzarządzania ",
+ "deploymentProfiles": "Profile wdrażania rozwiązania Windows Autopilot",
+ "description": "Poznaj siedem różnych sposobów rejestrowania komputera z systemem Windows 10/11 w usłudze Intune przez użytkowników lub administratorów.",
+ "descriptionLabel": "Metody rejestracji w systemie Windows",
+ "enrollmentStatusPage": "Strona ze stanem rejestracji"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Wybierz liczbę bitów zawartych w kluczu.",
+ "keyUsage": "Określ akcję kryptograficzną, która jest wymagana w celu wymiany klucza publicznego certyfikatu.",
+ "renewalThreshold": "Wprowadź procent (od 1 do 99) dozwolonego pozostałego okresu istnienia certyfikatu, zanim urządzenie będzie mogło żądać jego odnowienia. Wartość zalecana w usłudze Intune to 20%. (1–99)",
+ "rootCert": "Wybierz wcześniej skonfigurowany i przypisany profil certyfikatu głównego urzędu certyfikacji. Certyfikat urzędu certyfikacji musi być zgodny z certyfikatem głównym urzędu certyfikacji, który wystawia certyfikat dla tego profilu (ten, który jest obecnie konfigurowany).",
+ "scepServerUrl": "Wprowadź adres URL serwera usługi NDES, który wystawia certyfikaty za pośrednictwem protokołu SCEP (musi to być adres HTTPS). Przykład: https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Dodaj co najmniej jeden adres URL serwera usługi NDES, który wystawia certyfikaty za pośrednictwem protokołu SCEP (musi to być adres HTTPS). Przykład: https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Alternatywna nazwa obiektu",
+ "subjectNameFormat": "Format nazwy obiektu",
+ "validityPeriod": "Czas pozostały do wygaśnięcia certyfikatu. Wprowadź wartość, która jest mniejsza niż lub równa okresowi ważności wyświetlanemu w szablonie certyfikatu. Wartość domyślna to jeden rok."
+ },
+ "appInstallContext": "Określa kontekst instalacji do skojarzenia z tą aplikacją. W przypadku aplikacji z dwoma trybami wybierz żądany kontekst aplikacji. W przypadku wszystkich innych aplikacji ta opcja jest wstępnie wybrana na podstawie pakietu i nie można jej zmodyfikować.",
+ "autoUpdateMode": "Skonfiguruj priorytet aktualizacji dla tej aplikacji. Wybierz ustawienie Domyślnie, aby wymagać łączenie urządzenia z siecią Wi-Fi, jego zasilanie i ograniczenie w użytkowaniu przed aktualizacją aplikacji. Wybierz ustawienie Wysoki priorytet, aby zaktualizować aplikację, gdy tylko deweloper opublikuje aplikację, niezależnie od stanu naładowania, możliwości sieci Wi-Fi lub aktywności użytkownika końcowego na urządzeniu. Wybierz ustawienie Odroczono, aby zrezygnować z aktualizacji aplikacji na maksymalnie 90 dni. Ustawienia Wysoki priorytet i Odroczono będą obowiązywać tylko na urządzeniach DO.",
+ "configurationSettingsFormat": "Tekst formatu ustawień konfiguracji",
+ "ignoreVersionDetection": "Ustaw tę opcję na wartość „Tak” dla aplikacji automatycznie aktualizowanych przez dewelopera aplikacji (np. Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Wybierz pozycję „Tak” w przypadku aplikacji, które są automatycznie aktualizowane przez dewelopera, lub aby przed instalacją sprawdzić tylko identyfikator bundleID aplikacji. Wybierz pozycję „Nie”, aby przed instalacją sprawdzić numer wersji i identyfikator bundleID aplikacji.",
+ "installAsManagedMacOSLobApp": "To ustawienie dotyczy tylko systemu macOS 11 i nowszych. Aplikacja zostanie zainstalowana w systemie macOS 10.15 lub starszym, ale nie będzie zarządzana.",
+ "installContextDropdown": "Wybierz odpowiedni kontekst instalacji. W przypadku kontekstu użytkownika aplikacja zostanie zainstalowana tylko dla użytkownika docelowego, a w przypadku kontekstu urządzenia — dla wszystkich użytkowników na urządzeniu.",
+ "ldapUrl": "To jest nazwa hosta LDAP, z którego klienci mogą uzyskać publiczne klucze szyfrowania dla adresatów poczty e-mail. Wiadomości e-mail będą szyfrowane, gdy klucz jest dostępny. Obsługiwane formaty:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Wybierz uprawnienia w środowisku uruchomieniowym dla skojarzonej aplikacji.",
+ "policyAssociatedApp": "Wybierz aplikację, z którą będą skojarzone te zasady.",
+ "policyConfigurationSettings": "Wybierz metodę, z pomocą której chcesz zdefiniować ustawienia konfiguracji tych zasad.",
+ "policyDescription": "Opcjonalnie możesz podać opis tych zasad konfiguracji.",
+ "policyEnrollmentType": "Wybierz, czy te ustawienia są zarządzane za pośrednictwem zarządzania urządzeniami, czy aplikacji utworzonych przy użyciu zestawu SDK usługi Intune.",
+ "policyName": "Wprowadź nazwę tych zasad konfiguracji.",
+ "policyPlatform": "Wybierz platformę, do której zostaną zastosowane te zasady konfiguracji aplikacji.",
+ "policyProfileType": "Wybierz typy profilów urządzeń, do których będzie stosowany ten profil konfiguracji aplikacji",
+ "policySMime": "Skonfiguruj ustawienia podpisywania i szyfrowania S/MIME dla programu Outlook.",
+ "sMimeDeployCertsFromIntune": "Określ, czy certyfikaty S/MIME mają być dostarczane z usługi Intune w celu użycia w programie Outlook.\r\nUsługa Intune może automatycznie wdrażać dla użytkowników certyfikaty podpisywania i szyfrowania za pośrednictwem Portalu firmy.",
+ "sMimeEnable": "Określ, czy kontrolki S/MIME są włączone podczas tworzenia wiadomości e-mail",
+ "sMimeEnableAllowChange": "Określ, czy użytkownik może zmieniać ustawienie Włącz protokół S/MIME.",
+ "sMimeEncryptAllEmails": "Określ, czy wszystkie wiadomości e-mail muszą być szyfrowane.\r\nSzyfrowanie konwertuje dane na zaszyfrowany tekst, dzięki czemu może je odczytać tylko adresat.",
+ "sMimeEncryptAllEmailsAllowChange": "Określ, czy użytkownik może zmieniać ustawienie Szyfruj wszystkie wiadomości e-mail.",
+ "sMimeEncryptionCertProfile": "Określ profil certyfikatu na potrzeby szyfrowania wiadomości e-mail.",
+ "sMimeSignAllEmails": "Określ, czy wszystkie wiadomości e-mail muszą być podpisywane.\r\nPodpis cyfrowy weryfikuje autentyczność wiadomości e-mail i zapewnia, że zawartość nie została zmodyfikowana podczas przesyłania.",
+ "sMimeSignAllEmailsAllowChange": "Określ, czy użytkownik może zmieniać ustawienie Podpisuj wszystkie wiadomości e-mail.",
+ "sMimeSigningCertProfile": "Określ profil certyfikatu na potrzeby podpisywania wiadomości e-mail.",
+ "sMimeUserNotificationType": "Metoda powiadamiania użytkowników o konieczności otworzenia Portalu firmy w celu pobrania certyfikatów S/MIME na potrzeby programu Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "Element {0} jest uwzględniony w co najmniej jednym zestawie zasad. Jeśli usuniesz element {0}, nie będzie już można go przypisywać za pomocą tych zestawów zasad. Czy usunąć go mimo to?",
+ "contentWithError": "Element {0} może być uwzględniony w co najmniej jednym zestawie zasad. Jeśli usuniesz element {0}, nie będzie już można go przypisywać za pomocą tych zestawów zasad. Czy usunąć go mimo to?",
+ "header": "Czy na pewno chcesz usunąć to ograniczenie?"
+ },
+ "DeviceLimit": {
+ "description": "Określ maksymalną liczbę urządzeń, które może zarejestrować użytkownik.",
+ "header": "Ograniczenia limitu urządzeń",
+ "info": "Określ liczbę urządzeń, które może zarejestrować każdy użytkownik."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Musi to być wartość 1.0 lub większa.",
+ "android": "Wprowadź prawidłowy numer wersji. Przykłady: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Wprowadź prawidłowy numer wersji. Przykłady: 5.0, 5.1.1",
+ "iOS": "Wprowadź prawidłowy numer wersji. Przykłady: 9.0, 10.0, 9.0.2",
+ "mac": "Wprowadź prawidłowy numer wersji. Przykłady: 10, 10.10, 10.10.1",
+ "min": "Wersja minimalna nie może być niższa niż {0}",
+ "minMax": "Wersja minimalna nie może być większa niż wersja maksymalna.",
+ "windows": "Musi to być wersja 10.0 lub nowsza. Pozostaw to pole puste, aby zezwolić na urządzenia w wersji 8.1",
+ "windowsMobile": "Musi to być wersja 10.0 lub nowsza. Pozostaw to pole puste, aby zezwolić na urządzenia w wersji 8.1"
+ },
+ "allPlatformsBlocked": "Wszystkie platformy urządzeń są zablokowane. Zezwalaj na rejestrowanie platform, aby włączyć konfigurowanie platform.",
+ "blockManufacturerPlaceHolder": "Nazwa producenta",
+ "blockManufacturersHeader": "Zablokowani producenci",
+ "cannotRestrict": "Ograniczenie nie jest obsługiwane",
+ "configurationDescription": "Określ ograniczenia konfiguracji platformy, które muszą zostać spełnione w celu rejestracji urządzenia. Użyj zasad zgodności do ograniczenia urządzeń po rejestracji. Definiuj wersje w formacie główna.pomocnicza.kompilacja. Ograniczenia wersji mają zastosowanie tylko do urządzeń rejestrowanych przy użyciu Portalu firmy. Domyślnie usługa Intune klasyfikuje urządzenia jako będące własnością osobistą. Aby zaklasyfikować urządzenia jako będące własnością firmy, należy podjąć specjalną akcję.",
+ "configurationDescriptionLabel": "Dowiedz się więcej o ustawianiu ograniczeń rejestracji",
+ "configurations": "Konfiguruj platformy",
+ "deviceManufacturer": "Producent urządzenia",
+ "header": "Ograniczenia typu urządzeń",
+ "info": "Zdefiniuj platformy, wersje i typy zarządzania dopuszczone do rejestracji.",
+ "manufacturer": "Producent",
+ "max": "Maks.",
+ "maxVersion": "Maksymalna wersja",
+ "min": "Minimum",
+ "minVersion": "Minimalna wersja",
+ "newPlatforms": "Dopuszczono nowe platformy. Rozważ aktualizację konfiguracji platform.",
+ "personal": "Własność użytkownika",
+ "platform": "Platforma",
+ "platformDescription": "Możesz dopuścić rejestrację następujących platform. Blokuj tylko platformy, których nie będziesz obsługiwać. Dopuszczone platformy można skonfigurować z dodatkowymi ograniczeniami rejestracji.",
+ "platformSettings": "Ustawienia platformy",
+ "platforms": "Wybierz platformy",
+ "platformsSelected": "Wybrane platformy: {0}",
+ "type": "Typ",
+ "versions": "wersje",
+ "versionsRange": "Zezwalaj na minimalny/maksymalny zakres:",
+ "windowsTooltip": "Ogranicza rejestrację za pośrednictwem zarządzania urządzeniami przenośnymi. Nie ogranicza instalacji agenta komputera. Obsługiwane są tylko wersje systemów Windows 10 i Windows 11. Pozostaw puste wersje, aby zezwolić na korzystanie z systemu Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Pomyślnie zapisano priorytety ograniczeń."
+ },
+ "Row": {
+ "announce": "Priorytet: {0}, nazwa: {1}, przypisano: {2}"
+ },
+ "Table": {
+ "deployed": "Wdrożone",
+ "name": "Nazwa",
+ "priority": "Priorytet"
+ },
+ "Type": {
+ "limit": "Ograniczenie limitu urządzeń",
+ "type": "Ograniczenie typu urządzeń"
+ },
+ "allUsers": "Wszyscy użytkownicy",
+ "androidRestrictions": "Ograniczenia systemu Android",
+ "create": "Utwórz ograniczenie",
+ "defaultLimitDescription": "To jest domyślne ograniczenie limitu urządzeń stosowane z najniższym priorytetem dla wszystkich użytkowników niezależnie od członkostwa w grupie.",
+ "defaultTypeDescription": "To jest domyślne ograniczenie typu urządzenia stosowane z najniższym priorytetem dla wszystkich użytkowników niezależnie od członkostwa w grupie.",
+ "defaultWhfbDescription": "To jest domyślna konfiguracja funkcji Windows Hello dla firm stosowana z najniższym priorytetem dla wszystkich użytkowników niezależnie od członkostwa w grupie.",
+ "deleteMessage": "Na użytkowników, których to dotyczy, zostanie nałożone przypisane ograniczenie o kolejnym najwyższym priorytecie lub domyślne ograniczenie, jeśli żadne ograniczenie nie zostało przypisane.",
+ "deleteTitle": "Czy na pewno chcesz usunąć ograniczenie {0}?",
+ "descriptionHint": "Krótki akapit z opisem użycia poziomu ograniczeń określanego przez ustawienia ograniczeń w firmie.",
+ "edit": "Edytuj ograniczenie",
+ "info": "Urządzenie musi być zgodne z ograniczeniami rejestracji o najwyższym priorytecie przypisanymi do jego użytkownika. Możesz przeciągać ograniczenia urządzenia, aby zmieniać ich priorytet. Ograniczenia domyślne mają najniższy priorytet dla wszystkich użytkowników i służą do zarządzania rejestracjami bez użytkowników. Ograniczenia domyślne można edytować, ale nie można ich usuwać.",
+ "iosRestrictions": "Ograniczenia systemu iOS",
+ "mDM": "MDM",
+ "macRestrictions": "Ograniczenia systemu MacOS",
+ "maxVersion": "Wersja maksymalna",
+ "minVersion": "Wersja minimalna",
+ "nameHint": "To będzie główny atrybut widoczny w celu identyfikacji zestawu ograniczeń.",
+ "noAssignmentsStatusBar": "Przypisz ograniczenie do co najmniej jednej grupy. Kliknij pozycję Właściwości.",
+ "nonAdminForbiddenCreateError": "Aby tworzyć, edytować lub usuwać ograniczenia, musisz posiadać uprawnienia usługi Intune lub administratora globalnego.",
+ "nonAdminForbiddenEdit": "Aby edytować ograniczenia, musisz być administratorem.",
+ "notFound": "Nie znaleziono ograniczenia. Być może zostało już usunięte.",
+ "personallyOwned": "Urządzenia osobiste",
+ "restriction": "Ograniczenie",
+ "restrictionLowerCase": "ograniczenie",
+ "restrictionType": "Typ ograniczenia",
+ "selectType": "Wybierz typ ograniczenia",
+ "selectValidation": "Wybierz platformę",
+ "typeHint": "Wybierz opcję Ograniczenie typu urządzeń, aby ograniczyć właściwości urządzeń. Wybierz opcję Ograniczenie limitu urządzeń, aby ograniczyć liczbę urządzeń na użytkownika.",
+ "typeRequired": "Wymagany jest typ ograniczenia.",
+ "winPhoneRestrictions": "Ograniczenia systemu Windows Phone",
+ "windowsECv1Info": "Starszych ograniczeń rejestracji nie można edytować ani zmieniać ich priorytetów, tylko usuwać.",
+ "windowsECv2Info": "Możesz określić priorytety ograniczeń rejestracji, przeciągając je i upuszczając. Wyświetl ograniczenia domyślne i wstępnie skonfigurowane poniżej. Wszystkie nowe ograniczenia rejestracji będą miały wyższy priorytet niż domyślne i wstępnie skonfigurowane ograniczenia.",
+ "windowsRestrictions": "Ograniczenia systemu Windows",
+ "windowsRestrictionsPreview": "Ograniczenia systemu Windows oparte na filtrach (wersja zapoznawcza)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 dzień",
+ "twoDays": "2 dni",
+ "zeroDays": "0 dni"
+ },
+ "SecurityTemplate": {
+ "aSR": "Zmniejszenie obszaru podatnego na ataki",
+ "accountProtection": "Ochrona konta",
+ "allDevices": "Wszystkie urządzenia",
+ "antivirus": "Oprogramowanie antywirusowe",
+ "antivirusReporting": "Raportowanie antywirusowe (wersja zapoznawcza)",
+ "conditionalAccess": "Dostęp warunkowy",
+ "deviceCompliance": "Zgodność urządzenia",
+ "diskEncryption": "Szyfrowanie dysku",
+ "eDR": "Wykrywanie i reagowanie dotyczące punktów końcowych",
+ "ePM": "Zarządzanie uprawnieniami punktu końcowego",
+ "firewall": "Zapora",
+ "helpSupport": "Pomoc i obsługa techniczna",
+ "setup": "Instalacja",
+ "wdapt": "Microsoft Defender dla punktu końcowego"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Konfiguracja ochrony danych"
+ },
+ "OrganizeMailByThread": {
+ "title": "Organizuj pocztę według wątku",
+ "tooltip": "Zachowanie domyślne w programie Outlook polega na przekształcaniu konwersacji pocztowych w widok wątku. Jeśli to ustawienie zostanie wyłączone, program Outlook będzie wyświetlał każdą wiadomość pojedynczo i nie będzie grupować ich według wątku."
+ },
+ "Sync": {
+ "header": "Konfiguracja synchronizacji pól kontaktów z natywną aplikacją kontaktów"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
+ "allowBiometricsTitle": "Wymagaj informacji biometrycznych w celu uzyskania dostępu do aplikacji",
+ "allowBiometricsTooltip": "Biometria (np. funkcja TouchID lub FaceID) może być wymagana, aby użytkownicy mogli otwierać aplikację na swoich urządzeniach. Gdy biometria jest wymagana, jest używana obok metod uwierzytelniania wybranych w tym profilu. To ustawienie nie powinno być włączone, gdy zostały wdrożone zasady ochrony aplikacji usługi Intune, ponieważ zasady ochrony aplikacji obejmują wymagania w zakresie dostępu przed uzyskaniem dostępu do danych zarządzanych. Włączenie obu opcji będzie skutkować wieloma monitami o dostęp przy otwieraniu aplikacji Outlook Mobile. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
+ "allowCalendarNotificationsTitle": "Powiadomienia kalendarza",
+ "allowCalendarNotificationsTooltip": "Zezwalaj na wyświetlanie pełnych szczegółów w powiadomieniach kalendarza, gdy ustawienie zasad ochrony aplikacji „Powiadomienia dotyczące danych organizacji” jest ustawione na wartość „Zablokuj dane organizacji”.",
+ "allowDefaultAppSignatureTitle": "Domyślny podpis aplikacji",
+ "allowDefaultAppSignatureTooltip": "Domyślny podpis aplikacji wskazuje, czy aplikacja będzie używać podpisu „Pobierz program Outlook dla systemu iOS” jako domyślnego podpisu podczas tworzenia wiadomości. Jeśli to ustawienie zostanie wyłączone, domyślny podpis nie będzie używany, ale użytkownicy będą mogli dodać własny podpis. Jeśli zostanie ustawiona wartość Nie skonfigurowano, domyślnie ustawienie aplikacji będzie włączone.",
+ "allowExternalRecipientsMailTipTitle": "Porada dotycząca poczty dla adresatów zewnętrznych",
+ "allowExternalRecipientsMailTipTooltip": "Porady dotyczące poczty dla adresatów zewnętrznych są wyświetlane, gdy nadawca dodaje adresata zewnętrznego lub grupę dystrybucji zawierającą adresatów zewnętrznych. Porada dotycząca poczty informuje nadawców, że pisana wiadomość wyjdzie poza organizację, co pomaga im w dobraniu właściwego słownictwa, stylu i zawartości. Funkcja ta jest dostępna tylko dla kont usługi Exchange Online i kont lokalnych korzystających z nowoczesnego uwierzytelniania hybrydowego. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Włączone.",
+ "allowFocusedInboxTitle": "Priorytetowa skrzynka odbiorcza",
+ "allowFocusedInboxTooltip": "Priorytetowa skrzynka odbiorcza dzieli skrzynkę odbiorczą na dwie karty — Priorytetowe i Inne. Najważniejsze wiadomości e-mail są widoczne na karcie Priorytetowe, a pozostałe wiadomości, chociaż usunięte z głównego widoku, są nadal łatwo dostępne na karcie Inne. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, domyślnym ustawieniem w aplikacji jest Włączone.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
+ "allowMailNotificationsTitle": "Powiadomienia pocztowe",
+ "allowMailNotificationsTooltip": "Ta wartość określa, czy program Outlook będzie zezwalał na powiadomienia e-mail. Ustawienie wartości Nie powoduje wyłączenie powiadomień e-mail.",
+ "allowOrgDataOnWearablesTitle": "Dane organizacji na urządzeniach do noszenia na sobie",
+ "allowOrgDataOnWearablesTooltip": "Ta wartość określa, czy dane programu Outlook mogą być synchronizowane z urządzeniami do noszenia na sobie. Ustawienie wartości Nie powoduje wyłączenie synchronizacji z urządzeniami do noszenia na sobie.",
+ "allowSaveContactsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie synchronizacji kontaktów.",
+ "allowSaveContactsTitle": "Zapisz kontakty",
+ "allowSaveContactsTooltip": "Zapisywanie kontaktów w natywnej książce adresowej urządzenia przenośnego pozwala na łączenie nowych rozmów i wiadomości SMS z istniejącymi kontaktami użytkownika w programie Outlook. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
+ "allowSmartReplyTitle": "Sugerowane odpowiedzi",
+ "allowSmartReplyTooltip": "Po otwarciu wiadomości program Outlook może sugerować odpowiedzi poniżej wiadomości. Jeśli wybierzesz sugerowaną odpowiedź, możesz ją edytować przed jej wysłaniem. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Włączone.",
+ "allowUserChangeGeneralToolTip": "Określ, czy użytkownik może zmieniać ustawienie.",
+ "allowUserChangeTitle": "Zezwalaj użytkownikowi na zmianę ustawienia",
+ "blockExternalImagesAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
+ "blockExternalImagesTitle": "Blokuj obrazy zewnętrzne",
+ "blockExternalImagesTooltip": "Gdy blokowanie obrazów zewnętrznych jest włączone, aplikacja nie będzie pozwalać na pobieranie obrazów hostowanych w Internecie, które są osadzone w treści wiadomości. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
+ "disableAddinsTitle": "Zezwalaj na dodatki",
+ "disableAddinsTooltip": "Domyślnie zasady ochrony aplikacji umożliwiają użytkownikom korzystanie z dodatków innych firm, ale mogą być używane do blokowania dodatków za pomocą ustawienia „Synchronizuj dane aplikacji zarządzanych przez zasady z aplikacjami natywnymi lub dodatkami”. Skonfigurowanie tego ustawienia na wartość „Wyłączone” spowoduje zablokowanie dodatków, gdy ustawienie zasad ochrony aplikacji zostanie ustawione na wartość Dozwolone.",
+ "discoverFeedTitle": "Kanał informacyjny odkrywania",
+ "discoverFeedTooltip": "Kanał informacyjny odkrywania przedstawia najczęściej używane pliki pakietu Office. Domyślnie ten kanał jest włączony, gdy dla użytkownika włączono usługę Delve. W przypadku ustawienia wartości Nie skonfigurowano domyślne ustawienie aplikacji to Włączone.",
+ "enableSMIMETitle": "Włączanie protokołu S/MIME",
+ "enableSMIMETooltip": "Określ, czy kontrolki S/MIME są włączone podczas tworzenia wiadomości e-mail.",
+ "encryptAllEmails": "Szyfruj wszystkie wiadomości e-mail",
+ "encryptAllEmailsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie Szyfruj wszystkie wiadomości e-mail.",
+ "encryptAllEmailsTooltip": "Określ, czy wszystkie wiadomości e-mail muszą być szyfrowane. Szyfrowanie konwertuje dane na zaszyfrowany tekst, dzięki czemu może je odczytać tylko adresat.",
+ "ldapUrl": "Adres URL LDAP",
+ "ldapUrlTooltip": "To jest nazwa hosta LDAP, z którego klienci mogą uzyskać publiczne klucze szyfrowania dla adresatów poczty e-mail. Wiadomości e-mail będą szyfrowane, gdy klucz będzie dostępny. Obsługiwane formaty: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie.",
+ "nativeCalendarSyncMAMOnlyTitle": "Zezwalaj na synchronizację kalendarza",
+ "nativeCalendarSyncMAMOnlyTooltip": "Domyślnie zasady ochrony aplikacji umożliwiają synchronizowanie kalendarza z natywną aplikacją Kalendarz, ale można ich użyć do zablokowania dostępności synchronizacji kalendarza. To ustawienie działa niezależnie od ustawienia zasad ochrony aplikacji i umożliwia organizacjom określenie, czy synchronizacja kalendarza jest dostępna dla konta służbowego.",
+ "nativeCalendarSyncTitle": "Synchronizuj kalendarze",
+ "nativeCalendarSyncTooltip": "Domyślnie zasady ochrony aplikacji umożliwiają synchronizację kalendarza z natywną aplikacją Kalendarz, ale mogą służyć do blokowania dostępności synchronizacji kalendarza za pomocą ustawienia „Synchronizuj dane aplikacji zarządzanych przez zasady z aplikacjami natywnymi lub dodatkiem”. Skonfigurowanie tego ustawienia na wartość „Wyłączone” spowoduje zablokowanie synchronizacji kalendarza, gdy ustawienie zasad ochrony aplikacji ma wartość Dozwolone.",
+ "playMyEmailsTitle": "Odtwarzaj moje wiadomości e-mail",
+ "playMyEmailsTooltip": "Funkcja Odtwarzaj moje wiadomości e-mail nie jest domyślnie włączona w aplikacji, ale jest polecana uprawnionym użytkownikom za pośrednictwem baneru w skrzynce odbiorczej. Ustawienie na wartość Wyłączone spowoduje, że ta funkcja nie będzie polecana uprawnionym użytkownikom w aplikacji. Użytkownicy mogą ręcznie włączać funkcję Odtwarzaj moje wiadomości e-mail w aplikacji, nawet jeśli ta funkcja jest ustawiona na wartość Wyłączona. Po ustawieniu wartości Nie skonfigurowano domyślnym ustawieniem aplikacji jest Włączone i funkcja będzie polecana uprawnionym użytkownikom.",
+ "signAllEmails": "Podpisuj wszystkie wiadomości e-mail",
+ "signAllEmailsAllowUserChangeTooltip": "Określ, czy użytkownik może zmieniać ustawienie Podpisuj wszystkie wiadomości e-mail.",
+ "signAllEmailsTooltip": "Określ, czy wszystkie wiadomości e-mail muszą być podpisywane. Podpis cyfrowy weryfikuje autentyczność wiadomości e-mail i zapewnia, że zawartość nie została zmodyfikowana podczas przesyłania.",
+ "syncAddressTitle": "Adres",
+ "syncAddressTooltip": "Ta wartość określa, czy adres kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncBirthdayTitle": "Urodziny",
+ "syncBirthdayTooltip": "Ta wartość określa, czy data urodzenia kontaktu ma być synchronizowana z kontaktami natywnymi.",
+ "syncCompanyTitle": "Firma",
+ "syncCompanyTooltip": "Ta wartość określa, czy nazwa firmy kontaktu ma być synchronizowana z kontaktami natywnymi.",
+ "syncDepartmentTitle": "Dział",
+ "syncDepartmentTooltip": "Ta wartość określa, czy dział kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncEmailAddressTitle": "Adres e-mail",
+ "syncEmailAddressTooltip": "Ta wartość określa, czy adres e-mail kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncInstantMessagingAddressTitle": "Adres wiadomości błyskawicznych",
+ "syncInstantMessagingAddressTooltip": "Ta wartość określa, czy adres wiadomości błyskawicznych kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncJobTitleTitle": "Stanowisko",
+ "syncJobTitleTooltip": "Ta wartość określa, czy stanowisko kontaktu ma być synchronizowane z kontaktami natywnymi.",
+ "syncNicknameTitle": "Pseudonim",
+ "syncNicknameTooltip": "Ta wartość określa, czy pseudonim kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncNotesTitle": "Notes",
+ "syncNotesTooltip": "Ta wartość określa, czy uwagi dotyczące kontaktu mają być synchronizowane z kontaktami natywnymi.",
+ "syncPhoneHomeFaxNumberTitle": "Numer faksu domowego",
+ "syncPhoneHomeFaxNumberTooltip": "Ta wartość określa, czy numer faksu domowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncPhoneHomeNumberTitle": "Numer telefonu domowego",
+ "syncPhoneHomeNumberTooltip": "Ta wartość określa, czy numer telefonu domowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncPhoneMobileNumberTitle": "Numer telefonu komórkowego",
+ "syncPhoneMobileNumberTooltip": "Ta wartość określa, czy numer telefonu komórkowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncPhoneOtherNumberTitle": "Numer innego telefonu",
+ "syncPhoneOtherNumberTooltip": "Ta wartość określa, czy numer innego telefonu kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncPhonePagerNumberTitle": "Numer telefonu pagera",
+ "syncPhonePagerNumberTooltip": "Ta wartość określa, czy numer telefonu pagera kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncPhoneWorkFaxNumberTitle": "Numer faksu służbowego",
+ "syncPhoneWorkFaxNumberTooltip": "Ta wartość określa, czy numer faksu służbowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncPhoneWorkNumberTitle": "Numer telefonu służbowego",
+ "syncPhoneWorkNumberTooltip": "Ta wartość określa, czy numer telefonu służbowego kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncPrefixTitle": "Prefiks nazwy",
+ "syncPrefixTooltip": "Ta wartość określa, czy prefiks nazwy kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "syncSuffixTitle": "Sufiks nazwy",
+ "syncSuffixTooltip": "Ta wartość określa, czy sufiks nazwy kontaktu ma być synchronizowany z kontaktami natywnymi.",
+ "textPredictionsTitle": "Podpowiadanie tekstu",
+ "textPredictionsTooltip": "Program Outlook może sugerować wyrazy i frazy podczas redagowania wiadomości. Gdy aplikacja Outlook wyświetli sugestię, przesuń, aby ją zaakceptować. Gdy ustawienie nie jest skonfigurowane, domyślnym ustawieniem aplikacji jest Włączone.",
+ "themesEnabledTitle": "Kompozycje włączone",
+ "themesEnabledTooltip": "Określ, czy użytkownik może używać niestandardowego motywu wizualnego."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Te ustawienia służą do uzyskiwania informacji o użytkownikach instalujących aplikacje, które nie zostały zatwierdzone do użycia w firmie. Wybierz typ listy ograniczonych aplikacji:
\r\n Aplikacje zabronione — otrzymasz powiadomienie, jeśli jakiś użytkownik zainstaluje aplikację z tej listy. \r\n Zatwierdzone aplikacje — lista aplikacji, które zostały zatwierdzone do użycia w firmie. Otrzymasz powiadomienie, jeśli jakiś użytkownik zainstaluje aplikację spoza tej listy. \r\n ",
+ "androidZebraMxZebraMx": "Konfiguruj urządzenia Zebra, przekazując profil MX w formacie XML.",
+ "iosDeviceFeaturesAirprint": "Użyj tych ustawień do skonfigurowania urządzeń z systemem iOS, aby automatycznie nawiązywały połączenie z drukarkami obsługującymi funkcję AirPrint w sieci. Wymagane będą adresy IP i ścieżki zasobów drukarek.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Skonfiguruj rozszerzenie aplikacji, które umożliwia logowanie jednokrotne dla urządzeń z systemem iOS 13.0 lub nowszym.",
+ "iosDeviceFeaturesHomeScreenLayout": "Skonfiguruj układ Docka i ekranów głównych na urządzeniach z systemem iOS. Niektóre urządzenia mogą mieć ograniczenia liczby wyświetlanych elementów.",
+ "iosDeviceFeaturesIOSWallpaper": "Wyświetl obraz widoczny na ekranie głównym i/lub na ekranie blokady urządzeń z systemem iOS.\r\n Aby wyświetlać unikatowy obraz w każdym z tych miejsc, utwórz profil z obrazem dla ekranu blokady oraz profil z obrazem dla ekranu głównego.\r\n Następnie przypisz oba profile użytkownikom.\r\n \r\n
\r\n
Maksymalny rozmiar pliku: 750 KB
\r\n
Typ pliku: PNG, JPG lub JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Określ ustawienia powiadomień dla aplikacji. Obsługuje system iOS 9.3 i nowsze.",
+ "iosDeviceFeaturesSharedDevice": "Określ opcjonalny tekst wyświetlany na zablokowanym ekranie. Jest on obsługiwany w systemie iOS 9.3 i nowszych. Dowiedz się więcej",
+ "iosGeneralApplicationRestrictions": "Te ustawienia służą do uzyskiwania informacji o użytkownikach instalujących aplikacje, które nie zostały zatwierdzone do użycia w firmie. Wybierz typ listy ograniczonych aplikacji:
\r\n Aplikacje zabronione — otrzymasz powiadomienie, jeśli jakiś użytkownik zainstaluje aplikację z tej listy. \r\n Zatwierdzone aplikacje — lista aplikacji, które zostały zatwierdzone do użycia w firmie. Otrzymasz powiadomienie, jeśli jakiś użytkownik zainstaluje aplikację spoza tej listy. \r\n ",
+ "iosGeneralApplicationVisibility": "Użyj listy pokazywanych aplikacji, aby określić aplikacje dla systemu iOS, które mogą być wyświetlane lub uruchamiane przez użytkownika. Użyj listy ukrytych aplikacji, aby określić aplikacje dla systemu iOS, które nie mogą być wyświetlane ani uruchamiane przez użytkownika.",
+ "iosGeneralAutonomousSingleAppMode": "Aplikacje dodane do tej listy i przypisane do urządzenia mogą blokować urządzenie w celu przetwarzania tylko tej aplikacji po jej uruchomieniu lub blokować urządzenie podczas wykonywania określonej akcji (na przykład rozwiązywania testu). Po wykonaniu akcji lub usunięciu ograniczenia urządzenie powraca do normalnego stanu.",
+ "iosGeneralKiosk": "Tryb kiosku blokuje różne ustawienia urządzenia lub określa pojedynczą aplikację, którą można uruchomić na urządzeniu. Może to być przydatne w środowiskach, takich jak sklep, w którym na urządzeniu ma być uruchamiana tylko jedna aplikacja demonstracyjna.",
+ "macDeviceFeaturesAirprint": "Użyj tych ustawień do skonfigurowania urządzeń z systemem macOS w celu automatycznego nawiązywania połączenia ze zgodnymi drukarkami AirPrint znajdującymi się w sieci. Konieczna będzie znajomość adresów IP i ścieżek zasobów drukarek.",
+ "macDeviceFeaturesAssociatedDomains": "Skonfiguruj skojarzone domeny, aby udostępniać dane i poświadczenia logowania między aplikacjami i witrynami organizacji. Ten profil można zastosować do urządzeń z systemem macOS 10.15 lub nowszym.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Skonfiguruj rozszerzenie aplikacji, które umożliwia logowanie jednokrotne (SSO) dla urządzeń z systemem macOS 10.15 lub nowszym.",
+ "macDeviceFeaturesLoginItems": "Wybierz aplikacje, pliki i foldery, które mają być otwierane po zalogowaniu się użytkownika na urządzeniach. Jeśli chcesz zablokować użytkownikom możliwość zmiany sposobu otwierania aplikacji, możesz ukryć aplikację w konfiguracji użytkownika.",
+ "macDeviceFeaturesLoginWindow": "Skonfiguruj wygląd ekranu logowania systemu macOS oraz funkcje dostępne dla użytkowników przed i po zalogowaniu.",
+ "macExtensionsKernelExtensions": "Te ustawienia służą do konfigurowania zasad rozszerzeń jądra na urządzeniach z systemem macOS 10.13.2 lub nowszym.",
+ "macGeneralDomains": "Wiadomości e-mail wysyłane lub odbierane przez użytkownika, które nie pasują do domen określonych w tym miejscu, będą oznaczone jako niezaufane.",
+ "windows10EndpointProtectionApplicationGuard": "Podczas korzystania z przeglądarki Microsoft Edge funkcja Microsoft Defender Application Guard chroni Twoje środowisko przed witrynami, które nie zostały zdefiniowane jako zaufane przez Twoją organizację. Gdy użytkownicy odwiedzają witryny, które nie są wymienione w granicach izolowanej sieci, te witryny zostaną otwarte w wirtualnej sesji przeglądania w funkcji Hyper-V. Zaufane lokacje są definiowane przez granicę sieci, którą można ustawić w konfiguracji urządzenia. Ta funkcja jest dostępna tylko dla urządzeń z 64-bitowym systemem Windows 10 lub nowszym.",
+ "windows10EndpointProtectionCredentialGuard": "Włączenie funkcji Credential Guard spowoduje włączenie następujących ustawień wymaganych:\r\n \r\n
\r\n
Włącz zabezpieczenia oparte na wirtualizacji: włącza zabezpieczenia oparte na wirtualizacji (VBS) podczas następnego ponownego uruchomienia. Zabezpieczenia oparte na wirtualizacji używają funkcji hypervisor systemu Windows w celu zapewnienia obsługi usług zabezpieczeń.
\r\n \r\n
Bezpieczny rozruch z bezpośrednim dostępem do pamięci: włącza zabezpieczenia VBS z funkcją bezpiecznego rozruchu i bezpośrednim dostępem do pamięci (DMA).
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Wybierz dodatkowe aplikacje, dla których należy przeprowadzić inspekcję lub które są zaufane do uruchamiania za pomocą Kontroli aplikacji usługi Microsoft Defender. Składniki systemu Windows i wszystkie aplikacje ze Sklepu Windows są automatycznie zaufane do uruchamiania.
\r\n Aplikacje nie będą blokowane podczas uruchamiania w trybie „tylko inspekcja”. W trybie „tylko inspekcja” wszystkie zdarzenia są rejestrowane w dziennikach klienta lokalnego.\r\n ",
+ "windows10GeneralPrivacyPerApp": "Dodaj aplikacje, dla których chcesz określić inne zachowanie dotyczące prywatności niż zachowanie zdefiniowane w domyślnym ustawieniu prywatności.",
+ "windows10NetworkBoundaryNetworkBoundary": "Granica sieci to lista zasobów przedsiębiorstwa, takich jak domena hostowana w chmurze i zakresy adresów IP komputerów znajdujących się w sieci przedsiębiorstwa. Określ granice sieci, aby stosować zasady i chronić dane przechowywane w tych lokalizacjach.",
+ "windowsHealthMonitoring": "Skonfiguruj zasady monitorowania kondycji systemu Windows.",
+ "windowsPhoneGeneralApplicationRestrictions": "W systemie Windows Phone można zablokować możliwość instalowania lub uruchamiania przez użytkowników aplikacji określonych na liście zabronionych aplikacji lub aplikacji nieznajdujących się na liście zatwierdzonych aplikacji. Wszystkie zarządzane aplikacje muszą zostać dodane do listy zatwierdzonych aplikacji."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Tylko wybrane aplikacje blokujące zakończone niepowodzeniem w fazie techników",
+ "apps": "aplikacje",
+ "appsListName": "Lista aplikacji",
+ "blockingApps": "Blokowanie aplikacji",
+ "managedApps": "Aplikacje zarządzane",
+ "noApps": "Brak aplikacji",
+ "noAppsError": "Błąd podczas pobierania aplikacji",
+ "selectApps": "Wybierz aplikacje",
+ "selectedAppsCount": "Wybrane aplikacje: {0} (maks. 100)",
+ "useSelectedAppsAll": "Wszystkie",
+ "useSelectedAppsSelected": "Wybrane",
+ "useSelectedAppsToggleLabel": "Blokuj użycie urządzenia, dopóki nie zostaną zainstalowane wymagane aplikacje, jeśli są przypisane do użytkownika/urządzenia"
+ },
+ "Header": {
+ "application": "Aplikacja",
+ "publisher": "Wydawca",
+ "version": "Wersja"
+ },
+ "SearchBox": {
+ "ariaLabel": "Wyszukaj aplikacje",
+ "placeHolder": "Wyszukaj według nazwy lub wydawcy"
+ },
+ "allowToUseToggle": "Zezwalaj użytkownikom na używanie urządzenia, jeśli wystąpi błąd instalacji",
+ "blockToggle": "Zablokuj możliwość korzystania z urządzenia, dopóki nie zostaną zainstalowane wszystkie aplikacje i profile",
+ "blockToolTip": "Jeśli na przykład dodasz program Microsoft Word do tej listy, docelowi użytkownicy i urządzenia nie będą mogli opuścić strony stanu rejestracji do czasu pomyślnego zainstalowania programu Word.",
+ "collectLogToggle": "Włącz zbieranie dzienników i stronę diagnostyczną dla użytkowników końcowych",
+ "create": "Tworzenie profilu",
+ "customMessageTextBox": "Komunikat o błędzie",
+ "customMessageToggle": "Pokaż niestandardowy komunikat, gdy wystąpi limit czasu lub błąd",
+ "enableForAutopilotOnlyToggle": "Pokaż stronę tylko urządzeniom aprowizowanym za pomocą środowiska out-of-box experience (OOBE)",
+ "installQualityUpdatesToggle": "Instalowanie aktualizacji dotyczących jakości systemu Windows (może to spowodować ponowne uruchomienie urządzenia) (wersja zapoznawcza)",
+ "progressToggle": "Pokaż postęp konfiguracji aplikacji i profilu",
+ "resetToggle": "Zezwalaj użytkownikom na resetowanie urządzenia, jeśli wystąpi błąd instalacji",
+ "timeout": "Pokaż błąd, jeśli instalacja trwa dłużej niż określona liczba minut"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Właściwość",
+ "rule": "Reguła",
+ "ruleDetails": "Szczegóły reguły",
+ "value": "Wartość"
+ },
+ "assignIf": "Przypisz profil, jeżeli",
+ "deleteWarning": "Spowoduje to usunięcie wybranej reguły stosowania",
+ "dontAssignIf": "Nie przypisuj profilu, jeżeli",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "i {0} więcej",
+ "instructions": "Określ sposób stosowania tego profilu w przypisanej grupie. Usługa Intune zastosuje profil tylko do urządzeń, które spełniają połączone kryteria tych reguł.",
+ "maxText": "Maksymalna",
+ "minText": "Minimalna",
+ "noActionRow": "Nie określono reguł stosowania",
+ "oSVersion": "np. 1.2.3.4",
+ "toText": "do",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home (Chiny)",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home — pojedynczy język",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "Wersja systemu operacyjnego",
+ "windows10OsVersion": "Wersja systemu operacyjnego",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Stacja robocza z systemem Windows 10/11 Professional",
+ "windows10ProfessionalWorkstationN": "Stacja robocza N systemu Windows 10/11 Professional",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Zezwalaj użytkownikowi na zmianę ustawienia",
+ "tooltip": "Określ, czy użytkownik może zmieniać ustawienie."
+ },
+ "AllowWorkAccounts": {
+ "title": "Zezwalaj tylko na konta służbowe",
+ "tooltip": "Po włączeniu tego ustawienia użytkownicy nie będą mogli dodawać osobistych kont e-mail i magazynu w programie Outlook. Jeśli użytkownik ma już dodane konto osobiste do programu Outlook, zostanie poproszony o jego usunięcie. Jeśli użytkownik nie usunie konta osobistego, nie będzie można dodać konta służbowego."
+ },
+ "BlockExternalImages": {
+ "title": "Blokuj obrazy zewnętrzne",
+ "tooltip": "Gdy blokowanie obrazów zewnętrznych jest włączone, aplikacja nie będzie pozwalać na pobieranie obrazów hostowanych w Internecie, które są osadzone w treści wiadomości. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone"
+ },
+ "ConfigureEmail": {
+ "title": "Konfiguruj ustawienia konta e-mail"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Domyślny podpis aplikacji wskazuje, czy aplikacja będzie używać podpisu „Pobierz program Outlook dla systemu Android” jako domyślnego podpisu podczas tworzenia wiadomości. Jeśli to ustawienie zostanie wyłączone, domyślny podpis nie będzie używany, ale użytkownicy będą mogli dodać własny podpis.\r\n\r\nJeśli zostanie ustawiona wartość Nie skonfigurowano, domyślnie ustawienie aplikacji będzie włączone.",
+ "iOS": "Domyślny podpis aplikacji wskazuje, czy aplikacja będzie używać podpisu „Pobierz program Outlook dla systemu iOS” jako domyślnego podpisu podczas tworzenia wiadomości. Jeśli to ustawienie zostanie wyłączone, domyślny podpis nie będzie używany, ale użytkownicy będą mogli dodać własny podpis.\r\n\r\nJeśli zostanie ustawiona wartość Nie skonfigurowano, domyślnie ustawienie aplikacji będzie włączone."
+ },
+ "title": "Domyślny podpis aplikacji"
+ },
+ "OfficeFeedReplies": {
+ "title": "Kanał informacyjny odkrywania",
+ "tooltip": "Kanał informacyjny odkrywania przedstawia najczęściej używane pliki pakietu Office. Domyślnie ten kanał jest włączony, gdy dla użytkownika włączono usługę Delve. W przypadku ustawienia wartości Nie skonfigurowano domyślne ustawienie aplikacji to Włączone."
+ },
+ "OrganizeMailByThread": {
+ "title": "Organizuj pocztę według wątku",
+ "tooltip": "Zachowanie domyślne w programie Outlook polega na przekształcaniu konwersacji pocztowych w widok wątku. Jeśli to ustawienie zostanie wyłączone, program Outlook będzie wyświetlał każdą wiadomość pojedynczo i nie będzie grupować ich według wątku."
+ },
+ "PlayMyEmails": {
+ "title": "Odtwarzaj moje wiadomości e-mail",
+ "tooltip": "Funkcja Odtwarzaj moje wiadomości e-mail nie jest domyślnie włączona w aplikacji, ale jest polecana uprawnionym użytkownikom za pośrednictwem baneru w skrzynce odbiorczej. Ustawienie na wartość Wyłączone spowoduje, że ta funkcja nie będzie polecana uprawnionym użytkownikom w aplikacji. Użytkownicy mogą ręcznie włączać funkcję Odtwarzaj moje wiadomości e-mail w aplikacji, nawet jeśli ta funkcja jest ustawiona na wartość Wyłączona. Po ustawieniu wartości Nie skonfigurowano domyślnym ustawieniem aplikacji jest Włączone i funkcja będzie polecana uprawnionym użytkownikom."
+ },
+ "SuggestedReplies": {
+ "title": "Sugerowane odpowiedzi",
+ "tooltip": "Po otwarciu wiadomości program Outlook może wyświetlić pod nią sugerowane odpowiedzi. Jeśli wybierzesz sugerowaną odpowiedź, możesz ją edytować przed wysłaniem."
+ },
+ "SyncCalendars": {
+ "title": "Synchronizuj kalendarze",
+ "tooltip": "Skonfiguruj, czy użytkownicy mogą synchronizować swoje kalendarze programu Outlook z natywną aplikacją kalendarza i bazą danych. "
+ },
+ "TextPredictions": {
+ "title": "Podpowiadanie tekstu",
+ "tooltip": "Program Outlook może sugerować wyrazy i frazy podczas redagowania wiadomości. Gdy aplikacja Outlook wyświetli sugestię, przesuń, aby ją zaakceptować. Gdy ustawienie nie jest skonfigurowane, domyślnym ustawieniem aplikacji jest Włączone."
+ },
+ "ThemesEnabled": {
+ "title": "Kompozycje włączone",
+ "tooltip": "Określ, czy użytkownik może używać niestandardowego motywu wizualnego."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "Urządzenia z systemem ChromeOS"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Kontakty administracyjne",
+ "appPackaging": "Pakiety aplikacji",
+ "autopatchGroups": "Grupy poprawek automatycznych",
+ "devices": "Urządzenia",
+ "featureEnablement": "Aktywowanie funkcji",
+ "feedback": "Opinie",
+ "gettingStarted": "Wprowadzenie",
+ "messages": "Komunikaty",
+ "onlineResources": "Zasoby online",
+ "policyHealth": "Kondycja zasad",
+ "policyHealthPreview": "Kondycja zasad (wersja zapoznawcza)",
+ "releaseManagement": "Zarządzanie wydaniami",
+ "serviceRequests": "Żądania usług",
+ "settings": "Ustawienia",
+ "supportRequests": "Żądania pomocy technicznej",
+ "tenantEnrollment": "Rejestracja dzierżawy",
+ "tenantManagement": "Zarządzanie dzierżawą"
+ },
+ "actions": "Akcje w przypadku niezgodności",
+ "advancedExchangeSettings": "Ustawienia usługi Exchange Online",
+ "advancedThreatProtection": "Microsoft Defender dla punktu końcowego",
+ "allApps": "Wszystkie aplikacje",
+ "allDevices": "Wszystkie urządzenia",
+ "androidFotaDeployments": "Wdrożenia Android FOTA",
+ "appBundles": "Zbiór aplikacji",
+ "appCategories": "Kategorie aplikacji",
+ "appConfigPolicies": "Zasady konfiguracji aplikacji",
+ "appConfigurationStatus": "Stan konfiguracji aplikacji",
+ "appInstallStatus": "Stan instalacji aplikacji",
+ "appLicences": "Licencje aplikacji",
+ "appProtectionPolicies": "Zasady ochrony aplikacji",
+ "appProtectionStatus": "Stan ochrony aplikacji",
+ "appSelectiveWipe": "Selektywne czyszczenie aplikacji",
+ "appleVppTokens": "Tokeny VPP firmy Apple",
+ "apps": "Aplikacje",
+ "assign": "Przypisania",
+ "assignedPermissions": "Przypisane uprawnienia",
+ "assignedRoles": "Przypisane role",
+ "autopilotDeploymentReport": "Wdrożenia rozwiązania Autopilot (wersja zapoznawcza)",
+ "autopilotDeploymentReportV2": "Wdrożenia rozwiązania Autopilot 2.0 (wersja zapoznawcza)",
+ "brandingAndCustomization": "Dostosowywanie",
+ "cartProfiles": "Profile koszyków",
+ "certificateConnectors": "Łączniki certyfikatu",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Urządzenia podłączone do chmury (wersja zapoznawcza)",
+ "cloudPcActions": "Akcje dotyczące komputerów w chmurze (wersja zapoznawcza)",
+ "cloudPcMaintenanceWindows": "Okna obsługi komputera w chmurze (wersja zapoznawcza)",
+ "compliancePolicies": "Zasady zgodności",
+ "complianceScriptManagement": "Skrypty",
+ "complianceScriptManagementPreview": "Skrypty (wersja zapoznawcza)",
+ "complianceSettings": "Ustawienia zasad zgodności",
+ "conditionStatements": "Instrukcje warunkowe",
+ "conditions": "Lokalizacje",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Profile konfiguracji",
+ "configurationScripts": "Skrypty konfiguracji",
+ "connectorsAndTokens": "Łączniki i tokeny",
+ "corporateDeviceIdentifiers": "Identyfikatory urządzeń firmowych",
+ "customAttributes": "Atrybuty niestandardowe",
+ "customAttributesMacOS": "Atrybuty niestandardowe dla systemu macOS",
+ "customNotifications": "Powiadomienia niestandardowe",
+ "deploymentSettings": "Ustawienia wdrożenia",
+ "derivedCredentials": "Pochodne poświadczenia",
+ "deviceActions": "Akcje urządzenia",
+ "deviceCategories": "Kategorie urządzeń",
+ "deviceCleanUp": "Reguły czyszczenia urządzeń",
+ "deviceEnrollmentManagers": "Menedżerowie rejestracji urządzeń",
+ "deviceExecutionStatus": "Stan urządzenia",
+ "deviceLimitEnrollmentRestrictions": "Ograniczenia limitu urządzeń rejestracji",
+ "deviceTypeEnrollmentRestrictions": "Ograniczenia platformy urządzenia rejestracji",
+ "devices": "Urządzenia",
+ "discoveredApps": "Odnalezione aplikacje",
+ "edgePolicies": "Zasady dla przeglądarki Microsoft Edge",
+ "embeddedSIM": "Profile komórkowe eSIM (wersja zapoznawcza)",
+ "enrollDevices": "Zarejestruj urządzenia",
+ "enrollmentFailures": "Błędy rejestracji",
+ "enrollmentNotifications": "Powiadomienia dotyczące rejestracji (wersja zapoznawcza)",
+ "enrollmentRestrictions": "Ograniczenia rejestracji",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Łączniki usług Exchange",
+ "failuresForCumulativeQualityUpdates": "Błędy skumulowanej aktualizacji dotyczącej jakości systemu Windows",
+ "failuresForDriverUpdates": "Błędy aktualizacji sterownika systemu Windows",
+ "failuresForFeatureUpdates": "Błędy aktualizacji funkcji",
+ "failuresForQualityUpdates": "Błędy przyspieszonej aktualizacji systemu Windows",
+ "featureFlighting": "Pilotaż funkcji",
+ "featureUpdateDeployments": "Aktualizacje funkcji dla systemu Windows 10 i nowszego",
+ "flighting": "Testowanie",
+ "fotaUpdate": "Bezprzewodowa aktualizacja oprogramowania układowego",
+ "groupPolicy": "Szablony administracyjne",
+ "groupPolicyAnalytics": "Analiza zasad grupy",
+ "helpSupport": "Pomoc i obsługa techniczna",
+ "helpSupportReplacement": "Pomoc i obsługa techniczna ({0})",
+ "iOSAppProvisioning": "Profile aprowizacji aplikacji systemu iOS",
+ "incompleteUserEnrollments": "Nieukończone rejestracje użytkowników",
+ "iosUpdates": "Aktualizacje systemu iOS/iPadOS",
+ "legacyPcManagement": "Zarządzanie starszymi komputerami",
+ "macOSSoftwareUpdate": "Aktualizacje systemu macOS",
+ "macOSSoftwareUpdateAccountSummaries": "Stan instalacji dla urządzeń z systemem macOS",
+ "macOSSoftwareUpdateCategorySummaries": "Podsumowanie aktualizacji oprogramowania",
+ "macOSSoftwareUpdateStateSummaries": "aktualizacje",
+ "managedGooglePlay": "Zarządzany sklep Google Play",
+ "msfb": "Microsoft Store dla Firm",
+ "myPermissions": "Moje uprawnienia",
+ "notifications": "Powiadomienia",
+ "officeApps": "Aplikacje pakietu Office",
+ "officeProPlusPolicies": "Zasady dla aplikacji pakietu Office",
+ "onPremise": "Lokalnie",
+ "onPremisesConnector": "Lokalny łącznik Exchange ActiveSync",
+ "onPremisesDeviceAccess": "Urządzenia Exchange ActiveSync",
+ "onPremisesManageAccess": "Dostęp do lokalnego wystąpienia programu Exchange",
+ "outOfDateIosDevices": "Błędy instalacji dla urządzeń z systemem iOS",
+ "overview": "Przegląd",
+ "partnerDeviceManagement": "Zarządzanie urządzeniem partnera",
+ "perUpdateRingDeploymentState": "Stan wdrożenia według pierścienia aktualizacji",
+ "permissions": "Uprawnienia",
+ "platformApps": "Aplikacje: {0}",
+ "platformDevices": "Urządzenia: {0}",
+ "platformEnrollment": "{0} — rejestracja",
+ "policies": "Zasady",
+ "profiles": "Profile",
+ "properties": "Właściwości",
+ "reports": "Raporty",
+ "retireNoncompliantDevices": "Wycofaj niezgodne urządzenia",
+ "retireNoncompliantDevicesPreview": "Wycofaj niezgodne urządzenia (wersja zapoznawcza)",
+ "role": "Rola",
+ "scriptManagement": "Skrypty",
+ "securityBaselines": "Punkty odniesienia zabezpieczeń",
+ "serviceToServiceConnector": "Łącznik usługi Exchange Online",
+ "servicenowConnector": "Łącznik usługi ServiceNow",
+ "shellScripts": "Skrypty powłoki",
+ "teamViewerConnector": "Łącznik programu TeamViewer",
+ "telecomeExpenseManagement": "Zarządzanie wydatkami na telekomunikację",
+ "tenantAdmin": "Administrator dzierżawy",
+ "tenantAdministration": "Administracja dzierżawą",
+ "termsAndConditions": "Warunki i postanowienia",
+ "titles": "Tytuły",
+ "troubleshoot": "Rozwiązywanie problemów",
+ "troubleshootSupport": "Rozwiązywanie problemów i pomoc techniczna",
+ "user": "Użytkownik",
+ "userExecutionStatus": "Stan użytkownika",
+ "wdacSupplementalPolicies": "Uzupełniające zasady trybu S",
+ "win32CatalogUpdateApp": "Aktualizacje dla aplikacji do zarządzania aplikacjami dla przedsiębiorstw",
+ "win32CatalogUpdateAppInPreview": "Aktualizacje dla aplikacji wykazu systemu Windows (Win32) (wersja zapoznawcza)",
+ "win32CatalogUpdateAppPreviewTitle": "Wykaz aplikacji Enterprise z aktualizacjami (wersja zapoznawcza)",
+ "win32CatalogUpdateAppTitle": "Wykaz aplikacji Enterprise z aktualizacjami",
+ "windows10DriverUpdate": "Aktualizacje sterowników dla systemu Windows 10 i nowszych",
+ "windows10QualityUpdate": "Aktualizacje dotyczące jakości dla systemu Windows 10 i nowszych",
+ "windows10UpdateRings": "Pierścienie aktualizacji dla systemu Windows 10 i nowszego",
+ "windows10XPolicyFailures": "Błędy zasad systemu Windows 10X",
+ "windows365PartnerConnector": "Łączniki partnerów systemu Windows 365",
+ "windowsDiagnosticData": "Dane systemu Windows",
+ "windowsEnterpriseCertificate": "Certyfikat przedsiębiorstwa systemu Windows",
+ "windowsManagement": "Skrypty",
+ "windowsSideLoadingKeys": "Klucze ładowania bezpośredniego systemu Windows",
+ "windowsSymantecCertificate": "Certyfikat firmy DigiCert dla systemu Windows",
+ "windowsThreatReport": "Stan agenta zagrożenia"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Zezwalaj użytkownikom na otwieranie danych z wybranych usług",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Wybierz liczbę poprzednich wartości kodu PIN do zachowania"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "Jedna akcja blokowania jest wymagana dla wszystkich zasad zgodności.",
- "graceperiod": "Harmonogram (dni po stwierdzeniu niezgodności)",
- "graceperiodInfo": "Określ liczbę dni po stwierdzeniu niezgodności, po których ta akcja powinna być wyzwolona wobec urządzenia użytkownika",
- "subtitle": "Określ parametry akcji",
- "title": "Parametry akcji"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Udostępnij użytkownikom jako aktualizację opcjonalną",
+ "optionalValue": "Opcjonalna",
+ "required": "Udostępnij użytkownikom jako aktualizację wymaganą",
+ "requiredValue": "Wymagana"
},
- "List": {
- "gracePeriodDay": "{0} dzień po stwierdzeniu niezgodności",
- "gracePeriodDays": "{0} dni po stwierdzeniu niezgodności",
- "gracePeriodHour": "{0} godz. po stwierdzeniu niezgodności",
- "gracePeriodHours": "{0} godz. po stwierdzeniu niezgodności",
- "gracePeriodMinute": "{0} min po stwierdzeniu niezgodności",
- "gracePeriodMinutes": "{0} min po stwierdzeniu niezgodności",
- "immediately": "Natychmiast",
- "schedule": "Harmonogram",
- "scheduleInfoBalloon": "Liczba dni po niezgodności",
- "subtitle": "Określ sekwencję akcji wykonywanych wobec niezgodnych urządzeń",
- "title": "Akcje"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Aplikacja systemu Android Enterprise",
+ "androidForWorkApp": "Aplikacja zarządzanego sklepu Google Play",
+ "androidLobApp": "Aplikacja biznesowa dla systemu Android",
+ "androidStoreApp": "Aplikacja w sklepie dla systemu Android",
+ "builtInAndroid": "Wbudowana aplikacja systemu Android",
+ "builtInApp": "Aplikacja wbudowana",
+ "builtInIos": "Wbudowana aplikacja systemu iOS",
+ "default": "",
+ "iosIPadOSWebClip": "Klip internetowy systemu iOS/iPadOS",
+ "iosLobApp": "Aplikacja biznesowa dla systemu iOS",
+ "iosStoreApp": "Aplikacja w sklepie dla systemu iOS",
+ "iosVppApp": "Aplikacja nabyta w programie zakupów zbiorczych dla systemu iOS",
+ "lineOfBusinessApp": "Aplikacja biznesowa",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Przeglądarka Microsoft Edge (macOS)",
+ "macOSLobApp": "Aplikacja biznesowa systemu macOS",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Aplikacje platformy Microsoft 365 (system macOS)",
+ "macOSPkgApp": "Aplikacja systemu macOS (PKG)",
+ "macOSWebClip": "Klip internetowy dla systemu macOS",
+ "macOsVppApp": "Aplikacja nabyta w programie zakupów zbiorczych dla systemu macOS",
+ "managedAndroidLobApp": "Zarządzana aplikacja biznesowa dla systemu Android",
+ "managedAndroidStoreApp": "Zarządzana aplikacja w sklepie dla systemu Android",
+ "managedGooglePlayApp": "Aplikacja zarządzanego sklepu Google Play",
+ "managedGooglePlayPrivateApp": "Prywatna aplikacja zarządzanej usługi Google Play",
+ "managedGooglePlayWebApp": "Link internetowy do zarządzanej usługi Google Play",
+ "managedIosLobApp": "Zarządzana aplikacja biznesowa dla systemu iOS",
+ "managedIosStoreApp": "Zarządzana aplikacja w sklepie dla systemu iOS",
+ "microsoftStoreForBusinessApp": "Aplikacja ze sklepu Microsoft Store dla Firm",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store dla Firm",
+ "officeSuiteApp": "Aplikacje Microsoft 365 (Windows 10 i nowszy)",
+ "webApp": "Link sieci Web",
+ "windowsAppXLobApp": "Aplikacja biznesowa AppX systemu Windows",
+ "windowsClassicApp": "Aplikacja systemu Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (system Windows 10 i nowszy)",
+ "windowsMobileMsiLobApp": "Aplikacja biznesowa MSI systemu Windows",
+ "windowsPhone81AppXBundleLobApp": "Aplikacja biznesowa AppX systemu Windows Phone 8.1",
+ "windowsPhone81AppXLobApp": "Aplikacja biznesowa AppX systemu Windows Phone 8.1",
+ "windowsPhone81StoreApp": "Aplikacja ze Sklepu Windows Phone 8.1",
+ "windowsPhoneXapLobApp": "Aplikacja biznesowa XAP systemu Windows Phone",
+ "windowsStoreApp": "Aplikacja sklepu Microsoft Store (starsza wersja)",
+ "windowsUniversalAppXLobApp": "Uniwersalna aplikacja biznesowa AppX systemu Windows",
+ "windowsUniversalLobApp": "Uniwersalna aplikacja biznesowa systemu Windows",
+ "windowsWebApp": "Link internetowy systemu Windows"
+ },
+ "PolicySet": {
+ "appManagement": "Zarządzanie aplikacjami",
+ "assignments": "Przypisania",
+ "basics": "Podstawowe",
+ "deviceEnrollment": "Rejestrowanie urządzenia",
+ "deviceManagement": "Zarządzanie urządzeniami",
+ "scopeTags": "Tagi zakresu",
+ "appConfigurationTitle": "Zasady konfiguracji aplikacji",
+ "appProtectionTitle": "Zasady ochrony aplikacji",
+ "appTitle": "Aplikacje",
+ "iOSAppProvisioningTitle": "Profile aprowizacji aplikacji systemu iOS",
+ "deviceLimitRestrictionTitle": "Ograniczenia limitu urządzeń",
+ "deviceTypeRestrictionTitle": "Ograniczenia typu urządzeń",
+ "enrollmentStatusSettingTitle": "Strony stanu rejestracji",
+ "windowsAutopilotDeploymentProfileTitle": "Profile wdrażania rozwiązania Windows Autopilot",
+ "deviceComplianceTitle": "Zasady zgodności urządzeń",
+ "deviceConfigurationTitle": "Profile konfiguracji urządzeń",
+ "powershellScriptTitle": "Skrypty PowerShell"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Instalacja aplikacji może wymusić ponowne uruchomienie urządzenia",
+ "basedOnReturnCode": "Określ zachowanie na podstawie kodów powrotnych",
+ "force": "Usługa Intune wymusi obowiązkowe ponowne uruchomienie urządzenia",
+ "suppress": "Brak określonej czynności"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Wymagany czas instalacji (minuty)",
+ "maxRunTimeInMinutesToolTip": "Liczba minut, przez które system będzie czekać na zakończenie instalacji programu. Wartość domyślna to 60 minut."
+ },
+ "RunAsAccountOptions": {
+ "system": "System",
+ "user": "Użytkownik"
+ },
+ "availableUninstall": "Zezwalaj na dostępne odinstalowywanie",
+ "availableUninstallTooltip": "Wybierz pozycję „Tak”, aby udostępnić opcję odinstalowywania dla tej aplikacji użytkownikom z Portalu firmy. Wybierz pozycję „Nie”, aby uniemożliwić użytkownikom odinstalowanie aplikacji z Portalu firmy.",
+ "bladeTitle": "Program",
+ "deviceRestartBehavior": "Zachowanie ponownego uruchamiania urządzenia",
+ "deviceRestartBehaviorTooltip": "Wybierz zachowanie ponownego uruchomienia urządzenia po pomyślnej instalacji aplikacji. Wybierz pozycję „Określ zachowanie na podstawie kodów powrotnych”, aby ponownie uruchomić urządzenie na podstawie ustawień konfiguracji kodów powrotnych. Wybierz pozycję „Brak określonej czynności”, aby pominąć ponowne uruchomienie urządzenia podczas instalacji aplikacji korzystającej z instalatora MSI. Wybierz pozycję „Instalacja aplikacji może wymusić ponowne uruchomienie urządzenia”, aby zezwolić na ukończenie instalacji aplikacji bez pomijania ponownego uruchamiania. Wybierz pozycję „Usługa Intune wymusi obowiązkowe ponowne uruchomienie urządzenia”, aby zawsze ponownie uruchamiać urządzenie po pomyślnej instalacji aplikacji.",
+ "header": "Określ polecenia do instalowania i odinstalowywania tej aplikacji:",
+ "installCommand": "Polecenie instalacji",
+ "installCommandMaxLengthErrorMessage": "Polecenie instalacji nie może przekraczać maksymalnej dozwolonej długości równej 1024 znaki.",
+ "installCommandTooltip": "Pełny wiersz polecenia instalacji służący do zainstalowania tej aplikacji.",
+ "runAs32Bit": "Uruchom polecenia instalacji i odinstalowywania w procesie 32-bitowym na klientach 64-bitowych",
+ "runAs32BitTooltip": "Wybierz opcję „Tak”, aby instalować i odinstalowywać aplikację w procesie 32-bitowym na klientach 64-bitowych. Wybierz opcję „Nie” (domyślna), aby instalować i odinstalowywać aplikację w procesie 64-bitowym na klientach 64-bitowych. Klienci 32-bitowi będą zawsze korzystać z procesu 32-bitowego.",
+ "runAsAccount": "Zachowanie podczas instalowania",
+ "runAsAccountTooltip": "Wybierz pozycję „System”, aby zainstalować tę aplikację dla wszystkich użytkowników, jeśli jest to obsługiwane. Wybierz pozycję „Użytkownik”, aby zainstalować tę aplikację dla użytkownika zalogowanego na urządzeniu. W przypadku aplikacji MSI o podwójnym przeznaczeniu zmiany uniemożliwią pomyślne zakończenie aktualizacji i dezinstalacji, dopóki nie zostanie przywrócona wartość zastosowana do urządzenia w trakcie pierwotnej instalacji.",
+ "selectorLabel": "Program",
+ "uninstallCommand": "Polecenie odinstalowywania",
+ "uninstallCommandTooltip": "Pełny wiersz polecenia odinstalowywania służący do odinstalowania tej aplikacji."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Inne",
- "additionalRecipients": "Dodatkowi odbiorcy (za pośrednictwem poczty e-mail)",
- "additionalRecipientsBladeTitle": "Wybierz dodatkowych adresatów",
- "emailAddressPrompt": "Podaj adresy e-mail (rozdzielone przecinkami)",
- "invalidEmail": "Nieprawidłowy adres e-mail",
- "messageTemplate": "Szablon wiadomości",
- "noneSelected": "Nie wybrano niczego",
- "notSelected": "Nie wybrano",
- "numSelected": "wybrano: {0}",
- "selected": "Wybrano"
- },
- "block": "Oznacz urządzenie jako niezgodne",
- "lockDevice": "Zablokuj urządzenie (akcja lokalna)",
- "lockDeviceWithPasscode": "Zablokuj urządzenie (akcja lokalna)",
- "noAction": "Brak akcji",
- "noActionRow": "Brak akcji, wybierz opcję „Dodaj”, aby dodać akcję",
- "pushNotification": "Wyślij powiadomienie push do użytkownika końcowego",
- "remoteLock": "Zdalne zablokowanie niezgodnego urządzenia",
- "removeSourceAccessProfile": "Usuń źródłowy profil dostępu",
- "retire": "Dodaj urządzenie, aby wycofać listę",
- "wipe": "Wyczyść",
- "emailNotification": "Wyślij wiadomość e-mail do użytkownika końcowego"
- },
- "InstallIntent": {
- "available": "Dostępne dla zarejestrowanych urządzeń",
- "availableWithoutEnrollment": "Dostępne z rejestracją lub bez niej",
- "required": "Wymagane",
- "uninstall": "Odinstaluj"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Utwórz skrypt niestandardowy",
- "edit": "Edytuj skrypt niestandardowy"
- },
- "basicInfo": "Utwórz nowy niestandardowy pakiet skryptu na podstawie napisanych przez siebie skryptów wykrywania i korygowania.",
- "customScriptCapitalized": "Skrypt niestandardowy",
- "customScriptLowercase": "skrypt niestandardowy",
- "detectionScript": "Skrypt wykrywania"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Zezwalaj na użycie małych liter w kodzie PIN",
+ "notAllow": "Nie zezwalaj na użycie małych liter w kodzie PIN",
+ "requireAtLeastOne": "Wymagaj użycia co najmniej jednej małej litery w kodzie PIN"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Zezwalaj na użycie znaków specjalnych w kodzie PIN",
+ "notAllow": "Nie zezwalaj na użycie znaków specjalnych w kodzie PIN",
+ "requireAtLeastOne": "Wymagaj użycia co najmniej jednego znaku specjalnego w kodzie PIN"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Zezwalaj na użycie wielkich liter w kodzie PIN",
+ "notAllow": "Nie zezwalaj na użycie wielkich liter w kodzie PIN",
+ "requireAtLeastOne": "Wymagaj użycia co najmniej jednej wielkiej litery w kodzie PIN"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Utwórz nowy",
+ "createNewResourceAccountInfo": "
\r\nUtwórz nowe konto zasobu podczas rejestracji. Konto zasobu zostanie natychmiast dodane do tabeli kont zasobów, ale nie będzie aktywne do czasu, aż urządzenie zostanie zarejestrowane, a subskrypcja Surface Hub zweryfikowana. Dowiedz się więcej o kontach zasobów
\r\n ",
+ "createNewResourceTitle": "Tworzenie nowego konta zasobu",
+ "deviceNameInvalid": "Nazwa urządzenia ma nieprawidłowy format",
+ "deviceNameRequired": "Nazwa urządzenia jest wymagana",
+ "editResourceAccountLabel": "Edytuj",
+ "selectExistingCommandMenu": "Wybierz istniejące"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "Nazwy mogą się składać z maksymalnie 15 znaków oraz mogą zawierać litery (a–z, A–Z), cyfry (0–9) i łączniki. Nazwy nie mogą składać się z samych cyfr. Nazwy nie mogą zawierać pustych miejsc."
+ },
+ "Header": {
+ "addressableUserName": "Nazwa przyjazna dla użytkownika",
+ "azureADDevice": "Skojarzone urządzenie usługi Microsoft Entra",
+ "batch": "Tag grupy",
+ "dateAssigned": "Data przypisania",
+ "deviceAccountPwd": "Hasło konta urządzenia",
+ "deviceAccountUpn": "Konto urządzenia",
+ "deviceDisplayName": "Nazwa urządzenia",
+ "deviceFriendlyName": "Przyjazna nazwa urządzenia",
+ "deviceName": "Nazwa urządzenia",
+ "deviceUseType": "Typ użycia urządzenia",
+ "enrollmentState": "Stan rejestracji",
+ "intuneDevice": "Skojarzone urządzenie usługi Intune",
+ "lastContacted": "Ostatni kontakt",
+ "make": "Producent",
+ "model": "Model",
+ "profile": "Przypisany profil",
+ "profileStatus": "Stan profilu",
+ "purchaseOrderId": "Zamówienie zakupu",
+ "resourceAccount": "Konto zasobu",
+ "serialNumber": "Numer seryjny",
+ "userPrincipalName": "Użytkownik"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Wymagana jest przyjazna nazwa",
+ "pwdRequired": "Wymagane jest hasło",
+ "pwdValidFormat": "Nie można zaktualizować hasła. Wartość podana dla nowego hasła nie spełnia wymagań dotyczących długości lub złożoności domeny.",
+ "upnRequired": "Wymagane jest konto urządzenia",
+ "upnValidFormat": "Wartości mogą zawierać litery (a-z, A-Z), cyfry (0-9) i łączniki. Wartości nie mogą zawierać pustego miejsca."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Spotkanie i prezentacja",
+ "teamCollaboration": "Współpraca zespołowa"
+ },
+ "Devices": {
+ "featureDescription": "Rozwiązanie Windows Autopilot umożliwia dostosowanie gotowego do użycia środowiska (OOBE) do potrzeb użytkowników.",
+ "importErrorStatus": "Niektóre urządzenia nie zostały zaimportowane. Kliknij tutaj, aby uzyskać więcej informacji.",
+ "importPendingStatus": "Importowanie jest w toku. Czas, który upłynął: {0} min. Ten proces może zająć do {1} min."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Dołączono hybrydowo do usługi Microsoft Entra",
+ "activeDirectoryADLabel": "Dołączanie hybrydowe do usługi Microsoft Entra za pomocą rozwiązania Autopilot",
+ "azureAD": "Dołączono do usługi Microsoft Entra",
+ "unknownType": "Nieznany typ"
+ },
+ "Filter": {
+ "enrollmentState": "Stan",
+ "profile": "Stan profilu"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "Przyjazna nazwa użytkownika nie może być pusta."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Utwórz szablon nazewnictwa, aby dodać nazwy do urządzeń podczas rejestracji.",
+ "label": "Zastosuj szablon nazwy urządzenia"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "W przypadku profilów wdrażania rozwiązania Autopilot przyłączonych hybrydowo do rozwiązania Microsoft Entra urządzenia są nazywane przy użyciu ustawień określonych w konfiguracji dołączania do domeny."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MojaFirma-%RAND:4%",
+ "label": "Wprowadź nazwę",
+ "noDisallowedChars": "Nazwa może zawierać tylko znaki alfanumeryczne i łączniki oraz makro %SERIAL% lub %RAND:x%",
+ "serialLength": "Nie można używać więcej niż 7 znaków w przypadku makra %SERIAL%",
+ "validateLessThan15Chars": "Nazwa może się składać z maksymalnie 15 znaków",
+ "validateNoSpaces": "Nazwy komputerów nie mogą zawierać spacji",
+ "validateNotAllNumbers": "Nazwa musi także zawierać litery i/lub łączniki",
+ "validateNotEmpty": "Nazwa nie może być pusta",
+ "validateOnlyOneMacro": "Nazwa może zawierać tylko jedno makro, %SERIAL% lub %RAND:x%"
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Utwórz unikatowe nazwy dla swoich urządzeń. Nazwy mogą się składać z maksymalnie 15 znaków oraz mogą zawierać litery (a–z, A–Z), cyfry (0–9) i łączniki. Nazwy nie mogą zawierać tylko cyfr. Nazwy nie mogą zawierać spacji. Za pomocą makra %SERIAL% możesz dodać numer seryjny specyficzny dla sprzętu. Możesz też użyć makra %RAND:x%, aby dodać losowy ciąg cyfr, gdzie x oznacza liczbę cyfr do dodania."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Włącz uruchamianie trybu OOBE po naciśnięciu klawisza Windows 5 razy bez uwierzytelniania użytkownika w celu rejestrowania urządzenia i aprowizacji wszystkich aplikacji oraz ustawień w kontekście systemu. Aplikacje i ustawienia w kontekście użytkownika zostaną dostarczone po jego zalogowaniu się.",
+ "label": "Zezwalaj na wstępnie przygotowane wdrożenie"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Przepływ dołączania hybrydowego rozwiązania Autopilot usługi Microsoft Entra będzie kontynuowany, nawet jeśli nie ustanowi on łączności kontrolera domeny podczas OOBE.",
+ "label": "Pomiń kontrolę połączeń z usługą AD"
+ },
+ "accountType": "Typ konta użytkownika",
+ "accountTypeInfo": "Określ, czy na urządzeniu użytkownicy są administratorami, czy standardowymi użytkownikami. Należy pamiętać, że to ustawienie nie dotyczy kont administratora globalnego i administratora firmy. Te konta nie mogą być użytkownikami standardowymi, ponieważ mają dostęp do wszystkich funkcji administracyjnych w usłudze Microsoft Entra ID.",
+ "configOOBEInfo": "
\r\nSkonfiguruj środowisko gotowe do użycia dla urządzeń z rozwiązaniem Autopilot\r\n
",
+ "configureDevice": "Tryb wdrożenia",
+ "configureDeviceHintForSurfaceHub2": "Rozwiązanie Autopilot obsługuje dla urządzeń Surface Hub 2 tylko tryb samodzielnego wdrażania. Ten tryb nie powoduje skojarzenia użytkownika z zarejestrowanym urządzeniem, więc nie wymaga poświadczeń użytkownika.",
+ "configureDeviceHintForWindowsPC": "
\r\n Tryb wdrożenia służy do kontrolowania, czy użytkownik musi podać poświadczenia w celu aprowizacji urządzenia.\r\n
\r\n
\r\n
\r\n Sterowane przez użytkownika: urządzenia są kojarzone z użytkownikiem je rejestrującym, a do aprowizacji urządzenia będą wymagane poświadczenia\r\n
\r\n
\r\n Wdrażanie samodzielne (wersja zapoznawcza): urządzenia nie są kojarzone z użytkownikiem je rejestrującym, a do aprowizacji urządzenia nie będą wymagane poświadczenia\r\n
\r\nNastępujące opcje są automatycznie włączone dla urządzeń rozwiązania Autopilot w trybie samodzielnego wdrażania:\r\n
\r\n
\r\n
\r\n Pomiń wybór użycia domowego lub służbowego\r\n
\r\n
\r\n Pomiń rejestrację producenta OEM i konfigurację usługi OneDrive\r\n
\r\n
\r\n Pomiń uwierzytelnianie użytkownika w środowisku OOBE\r\n
\r\n
",
+ "endUserDevice": "Sterowane przez użytkownika",
+ "hideEscapeLink": "Ukryj opcje zmiany konta",
+ "hideEscapeLinkInfo": "Opcje zmiany konta i rozpoczęcia od nowa przy użyciu innego konta pojawiają się, odpowiednio, podczas początkowej konfiguracji urządzenia na firmowej stronie logowania oraz na stronie błędu domeny. Aby ukryć te opcje, musisz skonfigurować znakowanie firmowe w usłudze Microsoft Entra ID (wymaga systemu Windows 10 w wersji 1809 lub nowszej albo systemu Windows 11).",
+ "info": "Ustawienia profilu rozwiązania Autopilot służą do definiowania gotowego do użycia środowiska wyświetlanego użytkownikom podczas uruchamiania systemu Windows po raz pierwszy.",
+ "language": "Język (region)",
+ "languageInfo": "Określ język i region, które będą używane.",
+ "licenseAgreement": "Postanowienia licencyjne firmy Microsoft",
+ "licenseAgreementInfo": "Określ, czy użytkownikom ma być wyświetlana Umowa Licencyjna Użytkownika Oprogramowania (EULA).",
+ "plugAndForgetDevice": "Samodzielne wdrażanie",
+ "privacySettingWarning": "Wartość domyślna zbierania danych diagnostycznych została zmieniona dla urządzeń z systemem Windows 10 w wersji 1903 lub nowszej lub Windows 11.",
+ "privacySettings": "Ustawienia prywatności",
+ "privacySettingsInfo": "Określ, czy użytkownikom mają być wyświetlane ustawienia prywatności.",
+ "showCortanaConfigurationPage": "Konfiguracja Cortany",
+ "showCortanaConfigurationPageInfo": "Opcja „Pokaż” włączy wprowadzenie do konfiguracji Cortany podczas uruchamiania.",
+ "skipEULAWarning": "Ważne informacje na temat ukrywania postanowień licencyjnych",
+ "skipKeyboardSelection": "Automatycznie skonfiguruj klawiaturę",
+ "skipKeyboardSelectionInfo": "W przypadku wartości true pomiń stronę wyboru klawiatury, jeśli ustawiony jest język.",
+ "subtitle": "Profile rozwiązania Autopilot",
+ "title": "Środowisko gotowe do użycia (OOBE, Out-of-box experience)",
+ "useOSDefaultLanguage": "Domyślny systemu operacyjnego",
+ "userSelect": "Wybór użytkownika"
},
+ "Sync": {
+ "lastRequestedLabel": "Ostatnie żądanie synchronizacji",
+ "lastSuccessfulLabel": "Ostatnia pomyślna synchronizacja",
+ "syncInProgress": "Synchronizacja jest w toku. Zajrzyj tu ponownie wkrótce.",
+ "syncInitiated": "Zainicjowano synchronizację ustawień rozwiązania Autopilot.",
+ "syncSettingsTitle": "Synchronizuj ustawienia rozwiązania Autopilot"
+ },
+ "Title": {
+ "devices": "Urządzenia rozwiązania Windows AutoPilot"
+ },
+ "Tooltips": {
+ "addressableUserName": "Nazwa powitalna wyświetlana podczas konfiguracji urządzenia.",
+ "azureADDevice": "Przejdź do szczegółów skojarzonego urządzenia. Wartość Brak oznacza, że nie ma żadnego skojarzonego urządzenia.",
+ "batch": "Atrybut ciągu, który może służyć do identyfikowania grupy urządzeń. Pole tagu grupy usługi Intune jest mapowane na atrybut OrderID na urządzeniach usługi Microsoft Entra.",
+ "dateAssigned": "Znacznik czasu przypisania profilu do urządzenia.",
+ "deviceAccountPwd": "Hasło konta urządzenia dla urządzeń Surface Hub. W przypadku wprowadzenia podaj również konto urządzenia i przyjazną nazwę.",
+ "deviceAccountUpn": "Adres e-mail konta urządzenia dla urządzeń Surface Hub. W przypadku wprowadzenia podaj również hasło do konta urządzenia i przyjazną nazwę.",
+ "deviceDisplayName": "Skonfiguruj unikatową nazwę urządzenia. Ta nazwa zostanie zignorowana we wdrożeniach dołączonych hybrydowo do usługi Microsoft Entra. Nazwa urządzenia nadal pochodzi z profilu dołączania do domeny dla urządzeń hybrydowych usługi Microsoft Entra.",
+ "deviceFriendlyName": "Przyjazna nazwa urządzenia Surface Hub. W przypadku wprowadzenia podaj również konto urządzenia i hasło do tego konta.",
+ "deviceName": "Nazwa pokazywana, gdy ktoś próbuje odnaleźć urządzenie i połączyć się z nim.",
+ "deviceUseType": " Urządzenie zostanie skonfigurowane zgodnie z dokonanym wyborem. Możesz to zawsze zmienić później w ustawieniach. \r\n
\r\n
Na potrzeby spotkań i prezentacji funkcja Windows Hello nie jest włączana i dane są usuwane po każdej sesji.\r\n
\r\n
Na potrzeby współpracy zespołowej funkcja Windows Hello jest włączana i zapisywane są profile umożliwiające szybkie logowanie się.
\r\n
",
+ "enrollmentState": "Określa, czy urządzenie zostało zarejestrowane.",
+ "intuneDevice": "Przejdź do szczegółów skojarzonego urządzenia. Wartość Brak oznacza, że nie ma żadnego skojarzonego urządzenia.",
+ "lastContacted": "Znacznik czasu ostatniego kontaktu z urządzeniem.",
+ "make": "Producent wybranego urządzenia.",
+ "model": "Model wybranego urządzenia",
+ "profile": "Nazwa profilu przypisanego do urządzenia.",
+ "profileStatus": "Określa, czy do urządzenia jest przypisany profil.",
+ "purchaseOrderId": "Identyfikator zamówienia zakupu",
+ "resourceAccount": "Tożsamość urządzenia lub główna nazwa użytkownika (UPN).",
+ "serialNumber": "Numer seryjny wybranego urządzenia.",
+ "userPrincipalName": "Użytkownik na potrzeby wstępnego wypełnienia uwierzytelniania podczas konfiguracji urządzenia."
+ },
+ "allDevices": "Wszystkie urządzenia",
+ "allDevicesAlreadyAssignedError": "Profil rozwiązania Autopilot jest już przypisany do wszystkich urządzeń.",
+ "assignFailedDescription": "Nie można zaktualizować przypisań dla profilu {0}.",
+ "assignFailedTitle": "Nie można zaktualizować przypisań profilu rozwiązania Autopilot.",
+ "assignSuccessDescription": "Pomyślnie zaktualizowano przypisania dla profilu {0}.",
+ "assignSuccessTitle": "Pomyślnie zaktualizowano przypisania profilu rozwiązania Autopilot.",
+ "assignSufaceHub2ProfileNextStep": "Następne kroki dla tego wdrożenia",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Przypisz ten profil do co najmniej jednej grupy urządzeń",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Przypisz konto zasobu do każdego urządzenia Surface Hub, na którym wdrożono ten profil",
+ "assignedDevicesCount": "Przypisane urządzenia",
+ "assignedDevicesResourceAccountDescription": "
Aby wdrożyć ten profil na urządzeniu, musisz przypisać konto zasobu do urządzenia. Wybieraj po jednym urządzeniu, aby przypisać mu istniejące konto zasobu lub utworzyć nowe. Dowiedz się więcej o kontach zasobów
",
+ "assignedDevicesResourceAccountStatusBarMessage": "Ta tabela zawiera listę tylko tych urządzeń Surface Hub 2, do których przypisano ten profil.",
+ "assigningDescription": "Aktualizowanie przypisań dla profilu {0}.",
+ "assigningTitle": "Aktualizowanie przypisań profilu rozwiązania Autopilot.",
+ "autoremediationContext": "Wykryliśmy zmianę sprzętu na tym urządzeniu. Próbujemy automatycznie zarejestrować nowy sprzęt. Nie musisz nic teraz robić; stan zostanie zaktualizowany przy następnym zaewidencjonowaniu z wynikiem. Dowiedz się więcej o resetowaniu profilu.",
+ "autoremediationTitle": "Urządzenie {0} ma oczekującą poprawkę",
+ "cannotDeleteMessage": "Ten profil jest przypisany do grup. Aby można było go usunąć, należy anulować przypisanie wszystkich grup z tego profilu.",
+ "cannotDeleteTitle": "Nie można usunąć elementu {0}",
+ "createdDateTime": "Utworzono",
+ "deleteMessage": "Jeśli ten profil rozwiązania Autopilot zostanie usunięty, wszystkie urządzenia przypisane do tego profilu będą wyświetlane jako Nieprzypisane.",
+ "deleteMessageWithPolicySet": "Profil {0} jest dołączony do co najmniej jednego zestawu zasad. Jeśli usuniesz profil {0}, nie będzie już można go przypisywać za pomocą tych zestawów zasad.",
+ "deleteTitle": "Czy na pewno chcesz usunąć ten profil?",
+ "description": "Opis",
+ "deviceType": "Typ urządzenia",
+ "deviceUse": "Użycie urządzenia",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Usługa Autopilot obsługuje tylko urządzenia usługi Microsoft Entra dołączone dla urządzeń Surface Hub 2. Określ sposób dołączania urządzeń do usługi Active Directory (AD) w organizacji.\r\n
\r\n
\r\n
\r\n Dołączono do usługi Microsoft Entra: tylko w chmurze bez lokalnej usługi Windows Server Active Directory.\r\n
\r\n Określ sposób dołączania urządzeń do usługi Active Directory (AD) w Twojej organizacji:\r\n
\r\n
\r\n
\r\n Dołączono do usługi Microsoft Entra: tylko w chmurze bez lokalnej usługi Windows Server Active Directory\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Wystąpił błąd podczas pobierania liczby przypisanych urządzeń.",
+ "getAssignmentsError": "Wystąpił błąd podczas pobierania przypisań profilu rozwiązania Autopilot.",
+ "harvestDeviceId": "Przekonwertuj wszystkie docelowe urządzenia do rozwiązania Autopilot",
+ "harvestDeviceIdDescription": "Domyślnie ten profil można stosować tylko do urządzeń rozwiązania Autopilot zsynchronizowanych z usługi Autopilot.",
+ "harvestDeviceIdInfo": "\r\n Wybierz pozycję Tak, aby zarejestrować wszystkie urządzenia docelowe w rozwiązaniu Autopilot, o ile jeszcze nie zostały zarejestrowane. Gdy następnym razem urządzenia będą przechodzić przez tryb Out of Box Experience (OOBE) systemu Windows, będzie się to odbywać zgodnie z przypisanym scenariuszem rozwiązania Autopilot.\r\n \r\n Pamiętaj, że niektóre scenariusze rozwiązania Autopilot wymagają konkretnych minimalnych kompilacji systemu Windows. Upewnij się, że na Twoim urządzeniu jest minimalna wymagana kompilacja umożliwiająca przejście scenariusza.\r\n \r\n Usunięcie tego profilu nie spowoduje usunięcia z rozwiązania Autopilot urządzeń, których on dotyczy. Aby usunąć urządzenie z rozwiązania Autopilot, użyj widoku Urządzenia rozwiązania Windows AutoPilot.\r\n ",
+ "harvestDeviceIdWarning": "Po konwersji urządzenia rozwiązania Autopilot można przywrócić tylko przez usunięcie ich z listy urządzeń rozwiązania Autopilot.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Profile wdrażania rozwiązania Windows AutoPilot umożliwiają dostosowywanie środowiska out-of-box experience na Twoich urządzeniach.",
+ "invalidProfileNameMessage": "Znak „{0}” nie jest dozwolony",
+ "joinTypeLabel": "Dołącz do usługi Microsoft Entra ID jako",
+ "lastModifiedDateTime": "Ostatnia modyfikacja:",
+ "manualRemediationContext": "Wykryliśmy zmianę sprzętu na tym urządzeniu. Profil rozwiązania Autopilot nie zostanie automatycznie odebrany po jego zresetowaniu, chyba że ponownie zarejestrujesz urządzenie. Dowiedz się więcej o resetowaniu profilu.",
+ "manualRemediationTitle": "Urządzenie {0} wymaga Twojej uwagi",
+ "name": "Nazwa",
+ "noAutopilotProfile": "Brak profilów rozwiązania Autopilot",
+ "notEnoughPermissionAssignedError": "Nie masz wystarczających uprawnień, aby przypisać ten profil do co najmniej jednej z wybranych grup. Skontaktuj się z administratorem.",
+ "profile": "profil",
+ "resourceAccountStatusBarMessage": "Konto zasobu jest wymagane dla każdego urządzenia Surface Hub 2, do którego zostanie wdrożony ten profil. Kliknij, aby dowiedzieć się więcej.",
+ "selectServices": "Wybierz usługę katalogową, do której zostaną dołączone urządzenia",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Tryb wdrożenia",
+ "windowsPCCommandMenu": "Komputer z systemem Windows",
+ "directoryServiceLabel": "Dołącz do usługi Microsoft Entra ID jako"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Urządzenia zarządzane",
+ "devicesWithoutEnrollment": "Aplikacje zarządzane"
+ },
+ "AppProtection": {
+ "allAppTypes": "Dotyczy wszystkich typów aplikacji",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Aplikacje w ramach profilu programu Android for Work",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Aplikacje na dedykowanych urządzeniach Android dla przedsiębiorstw z trybem współdzielonym aplikacji Microsoft Entra",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Skojarzono aplikacje w przypadku użytkownika projektu open source systemu Android",
+ "appsOnAndroidOpenSourceProjectUserless": "Bezużyteczne aplikacje w przypadku projektu open source systemu Android",
+ "appsOnIntuneManagedDevices": "Aplikacje na urządzeniach zarządzanych przez usługę Intune",
+ "appsOnUnmanagedDevices": "Aplikacje na urządzeniach niezarządzanych",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android i Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Niedostępne",
+ "windows10PlatformLabel": "Windows 10 i nowsze",
+ "withEnrollment": "Z rejestracją",
+ "withoutEnrollment": "Bez rejestracji"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Klient stacjonarny usługi Project Online",
+ "visioProRetail": "Visio Online (plan 2)"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Nie można usunąć aplikacji {0}",
+ "failureCa": "Nie można usunąć {0} ponieważ jest przywoływany przez zasady urzędu certyfikacji",
+ "modifying": "Usuwanie pliku {0}",
+ "success": "Pomyślnie usunięto element {0}"
+ },
+ "Notify": {
+ "failure": "Nie można zaktualizować elementu {0}",
+ "modifying": "Modyfikowanie elementu {0}",
+ "success": "Pomyślnie zaktualizowano element {0}"
+ },
+ "menuLabel": "Kontekst uwierzytelniania"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Dowiedz się więcej o wymaganiach metod uwierzytelniania spełnianych przez dostawców federacyjnych.",
+ "certificate": "Uwierzytelnianie certyfikatów",
+ "infoBubble": "Określ wymaganą metodę uwierzytelniania, która musi być stosowana przez dostawcę federacji, np. usługę ADFS.",
+ "multifactor": "Uwierzytelnianie wieloskładnikowe",
+ "require": "Wymagaj metody uwierzytelniania federacyjnego (wersja zapoznawcza)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Zasady trwałej sesji przeglądarki działają tylko wtedy, gdy wybrana jest opcja „Wszystkie aplikacje w chmurze”. Zaktualizuj wybór aplikacji w chmurze."
+ },
+ "Option": {
+ "always": "Zawsze trwała",
+ "help": "Trwała sesja przeglądarki umożliwia użytkownikom pozostanie zalogowanym po zamknięciu i ponownym otworzeniu okna przeglądarki \n
\n
To ustawienie działa prawidłowo, gdy wybrana jest opcja „Wszystkie aplikacje w chmurze”
\n
Nie ma to wpływu na okresy istnienia tokenów ani na ustawienie częstotliwości logowania.
\n
Spowoduje to przesłonięcie zasad „Wyświetlaj opcję zachowania stanu zalogowania” w znakowaniu firmowym.
\n
Opcja „Nigdy trwała” przesłoni wszelkie oświadczenia logowania jednokrotnego przekazane z federacyjnej usługi uwierzytelniania.
\n
Opcja „Nigdy trwała” uniemożliwi korzystanie z logowania jednokrotnego we wszystkich aplikacjach na urządzeniu oraz między aplikacjami a przeglądarką użytkownika dla urządzeń przenośnych.
\n",
+ "label": "Trwała sesja przeglądarki",
+ "never": "Nigdy trwała"
+ },
+ "Warning": {
+ "allApps": "Trwała sesja przeglądarki działa tylko wtedy, gdy wybrana jest opcja Wszystkie aplikacje w chmurze. Zmień wybór aplikacji w chmurze. Kliknij tutaj, aby dowiedzieć się więcej."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Godziny lub dni",
+ "value": "Częstotliwość"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} dni",
+ "singular": "1 dzień"
+ },
+ "Hour": {
+ "plural": "{0} godz.",
+ "singular": "1 godzina"
+ },
+ "daysOption": "Dni",
+ "everytime": "Za każdym razem",
+ "help": "Czas, po upłynięciu którego użytkownik będzie musiał ponownie się zalogować podczas próby uzyskania dostępu do zasobu. Ustawieniem domyślnym jest kroczący przedział czasu wynoszący 90 dni, tzn. użytkownicy będą musieli się ponownie uwierzytelnić podczas pierwszej próby uzyskania dostępu do zasobu po okresie nieaktywności wynoszącym 90 lub więcej dni.",
+ "hoursOption": "Godziny",
+ "label": "Częstotliwość logowania",
+ "placeholder": "Wybierz jednostki"
+ }
+ },
+ "mainOption": "Modyfikuj okres istnienia sesji",
+ "mainOptionHelp": "Skonfiguruj, jak często użytkownikom będzie wyświetlany monit i czy sesje przeglądarki będą utrwalone. Aplikacje, które nie obsługują nowoczesnych protokołów uwierzytelniania, mogą nie honorować tych zasad. W takich przypadkach skontaktuj się z deweloperem aplikacji."
+ },
+ "SingleSelectorActive": {
+ "failed": "Nie można załadować danych.",
+ "reattempt": "Ładowanie danych. Ponawianie próby dla {0} z {1}."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Wybierz role katalogu"
+ },
+ "Excluded": {
+ "gridAria": "Lista wykluczonych użytkowników"
+ },
+ "Included": {
+ "gridAria": "Lista uwzględnionych użytkowników"
+ },
+ "Validation": {
+ "customRoleIncluded": "„Role katalogów” zawierają co najmniej jedną rolę niestandardową",
+ "customRoleSelected": "Wybrano co najmniej jedną rolę niestandardową",
+ "failed": "Opcja „{0}” musi być skonfigurowana",
+ "roles": "Wybierz co najmniej jedną rolę",
+ "usersGroups": "Wybierz co najmniej jednego użytkownika lub grupę"
+ },
+ "learnMore": "Kontroluj dostęp na podstawie tego, do kogo będą stosowane zasady, np. do użytkowników i grup, tożsamości obciążeń, ról katalogu lub gości zewnętrznych."
+ },
+ "advancedTabText": "Zaawansowane",
+ "allCloudAppsErrorBox": "Opcja „Wszystkie aplikacje w chmurze” musi być wybrana, jeśli wybrane jest udzielenie „Wymagaj zmiany hasła”",
+ "allCloudAppsReauth": "W przypadku wybrania kontroli sesji „Częstotliwość logowania za każdym razem” należy wybrać warunek „wszystkie aplikacje w chmurze” i „ryzyko logowania”",
+ "allCloudOrSpecificApps": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga wybrania „wszystkich aplikacji w chmurze” lub specjalnie obsługiwanych aplikacji",
+ "allDayCheckboxLabel": "Cały dzień",
+ "allDevicePlatforms": "Dowolne urządzenie",
+ "allGuestUserInfoContent": "Obejmuje gości usługi Microsoft Entra B2B, ale nie gości programu SharePoint B2B",
+ "allGuestUserLabel": "Wszyscy goście i użytkownicy zewnętrzni",
+ "allRiskLevelsOption": "Wszystkie poziomy ryzyka",
+ "allTrustedLocationLabel": "Wszystkie zaufane lokalizacje",
+ "allUserGroupSetSelectorLabel": "Wybrano wszystkich użytkowników i wszystkie grupy",
+ "allUsersReauth": "Kontrola sesji „Częstotliwość logowania za każdym razem” wymaga wybrania opcji „Wszyscy użytkownicy”",
+ "allUsersString": "Wszyscy użytkownicy",
+ "and": "{0} I {1}",
+ "andWithGrouping": "{0} I {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Dowolna aplikacja w chmurze",
+ "appContextOptionInfoContent": "Żądany tag uwierzytelniania",
+ "appContextOptionLabel": "Żądany tag uwierzytelniania (wersja zapoznawcza)",
+ "appContextUriPlaceholder": "Przykład: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Ograniczenia wymuszane przez aplikacje mogą wymagać dodatkowych czynności konfiguracyjnych administratora w ramach aplikacji w chmurze. Ograniczenia będą stosowane tylko dla nowych sesji.",
+ "appNotSetSeletorLabel": "Nie wybrano żadnej aplikacji w chmurze",
+ "appReauthNotSupported": "Ta aplikacja nie obsługuje kontroli sesji „częstotliwość logowania za każdym razem”.",
+ "applyConditionClientAppInfoBalloonContent": "Konfiguruj aplikacje klienckie, aby do określonych z nich zastosować zasady",
+ "applyConditionDevicePlatformInfoBalloonContent": "Konfiguruj platformy urządzeń, aby do określonych z nich zastosować zasady",
+ "applyConditionDeviceStateInfoBalloonContent": "Skonfiguruj stany urządzeń, aby do określonych z nich zastosować zasady",
+ "applyConditionLocationInfoBalloonContent": "Konfiguruj lokalizacje, aby zastosować zasady do zaufanych lub niezaufanych lokalizacji",
+ "applyConditionSigninRiskInfoBalloonContent": "Konfiguruj ryzyko związane z logowaniem, aby zastosować zasady do określonych poziomów ryzyka",
+ "applyConditionUserRiskInfoBalloonContent": "Konfiguruj ryzyko związane z użytkownikiem, aby zastosować zasady do określonych poziomów ryzyka",
+ "applyConditonLabel": "Konfiguruj",
+ "ariaLabelPolicyDisabled": "Zasady są wyłączone",
+ "ariaLabelPolicyEnabled": "Zasady są włączone",
+ "ariaLabelPolicyReportOnly": "Zasada jest w trybie samego raportu",
+ "blockAccess": "Blokuj dostęp",
+ "builtInDirectoryRoleLabel": "Wbudowane role katalogów",
+ "casCustomControlInfo": "Zasady niestandardowe należy skonfigurować w portalu Cloud App Security. Ta kontrola działa natychmiast w przypadku polecanych aplikacji i może być samodzielnie aprowizowana dla dowolnej aplikacji. Kliknij tutaj, aby dowiedzieć się więcej o obu scenariuszach.",
+ "casInfoBubble": "Ta kontrolka działa dla różnych aplikacji w chmurze.",
+ "casPreconfiguredControlInfo": "Ta kontrola działa natychmiast w przypadku polecanych aplikacji i może być samodzielnie aprowizowana dla dowolnej aplikacji. Kliknij tutaj, aby dowiedzieć się więcej o obu scenariuszach.",
+ "cert64DownloadCol": "Pobierz certyfikat base64",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Pobierz certyfikat",
+ "certDurationCol": "Data wygaśnięcia",
+ "certDurationStartCol": "Ważny od",
+ "certName": "VpnCert",
+ "certainApps": "Tylko specjalnie obsługiwane aplikacje są włączone dla opcji „Częstotliwość operacji logowania za każdym razem”, jeśli nie udzielono uprawnień „Wymagaj uwierzytelniania wieloskładnikowego” i „Wymagaj zmiany hasła”",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Wybierz aplikacje",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Wybrane aplikacje",
+ "chooseApplicationsEmpty": "Brak aplikacji",
+ "chooseApplicationsNone": "Brak",
+ "chooseApplicationsNoneFound": "Nie można znaleźć „{0}”. Spróbuj użyć innej nazwy lub identyfikatora.",
+ "chooseApplicationsPlural": "{0} i inne ({1})",
+ "chooseApplicationsReAuthEverytimeInfo": "Szukasz aplikacji? Niektórych aplikacji nie można używać z kontrolą sesji „Wymagaj ponownego uwierzytelnienia — za każdym razem”",
+ "chooseApplicationsRemove": "Usuń",
+ "chooseApplicationsReturnedPlural": "Liczba znalezionych aplikacji: {0}",
+ "chooseApplicationsReturnedSingular": "Znaleziono 1 aplikację",
+ "chooseApplicationsSearchBalloon": "Wyszukaj aplikację, wprowadzając jej nazwę lub identyfikator.",
+ "chooseApplicationsSearchHint": "Wyszukaj aplikacje...",
+ "chooseApplicationsSearchLabel": "Aplikacje",
+ "chooseApplicationsSearching": "Trwa wyszukiwanie...",
+ "chooseApplicationsSelect": "Wybierz",
+ "chooseApplicationsSelected": "Wybrane",
+ "chooseApplicationsSingular": "{0} i jedna więcej",
+ "chooseApplicationsTooMany": "Więcej wyników niż można wyświetlić. Filtruj przy użyciu pola wyszukiwania.",
+ "chooseLocationCorpnetItem": "Sieć firmowa",
+ "chooseLocationSelectedLocationsLabel": "Wybrane lokalizacje",
+ "chooseLocationTrustedIpsItem": "Zaufane adresy IP z uwierzytelnianiem wieloskładnikowym",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Wybieranie lokalizacji",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Wybrane lokalizacje",
+ "chooseLocationsEmpty": "Brak lokalizacji",
+ "chooseLocationsExcludedSelectorTitle": "Wybierz",
+ "chooseLocationsIncludedSelectorTitle": "Wybierz",
+ "chooseLocationsNone": "Brak",
+ "chooseLocationsNoneFound": "Nie można znaleźć „{0}”. Spróbuj użyć innej nazwy lub identyfikatora.",
+ "chooseLocationsPlural": "{0} i inne ({1})",
+ "chooseLocationsRemove": "Usuń",
+ "chooseLocationsReturnedPlural": "Liczba odnalezionych lokalizacji: {0}",
+ "chooseLocationsReturnedSingular": "Odnaleziono 1 lokalizację",
+ "chooseLocationsSearchBalloon": "Wyszukaj lokalizację, wprowadzając jej nazwę.",
+ "chooseLocationsSearchHint": "Wyszukaj lokalizacje...",
+ "chooseLocationsSearchLabel": "Lokalizacje",
+ "chooseLocationsSearching": "Trwa wyszukiwanie...",
+ "chooseLocationsSelect": "Wybierz",
+ "chooseLocationsSelected": "Wybrane",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Wybierz",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Wybierz",
+ "chooseLocationsSingular": "{0} i jedna więcej",
+ "chooseLocationsTooMany": "Więcej wyników niż można wyświetlić. Filtruj przy użyciu pola wyszukiwania.",
+ "claimProviderAddCommandText": "Nowa kontrolka niestandardowa",
+ "claimProviderAddNewBladeTitle": "Nowa kontrolka niestandardowa",
+ "claimProviderDeleteCommand": "Usuń",
+ "claimProviderDeleteDescription": "Czy na pewno chcesz usunąć „{0}”? Tej akcji nie można cofnąć.",
+ "claimProviderDeleteTitle": "Czy na pewno?",
+ "claimProviderEditInfoText": "Wprowadź dane w formacie JSON na potrzeby dostosowanych kontrolek udostępnionych przez dostawców oświadczeń.",
+ "claimProviderNotificationCreateDescription": "Tworzenie kontrolki niestandardowej o nazwie „{0}”",
+ "claimProviderNotificationCreateFailedDescription": "Utworzenie kontrolki niestandardowej „{0}” nie powiodło się. Spróbuj ponownie później.",
+ "claimProviderNotificationCreateFailedTitle": "Nie można utworzyć kontrolki niestandardowej",
+ "claimProviderNotificationCreateSuccessDescription": "Utworzono kontrolkę niestandardową o nazwie „{0}”",
+ "claimProviderNotificationCreateSuccessTitle": "Utworzono sieć „{0}”",
+ "claimProviderNotificationCreateTitle": "Tworzenie sieci „{0}”",
+ "claimProviderNotificationDeleteDescription": "Usuwanie kontrolki niestandardowej o nazwie „{0}”",
+ "claimProviderNotificationDeleteFailedDescription": "Usunięcie kontrolki niestandardowej „{0}” nie powiodło się. Spróbuj ponownie później.",
+ "claimProviderNotificationDeleteFailedTitle": "Nie można usunąć kontrolki niestandardowej",
+ "claimProviderNotificationDeleteSuccessDescription": "Usunięto kontrolkę niestandardową o nazwie „{0}”",
+ "claimProviderNotificationDeleteSuccessTitle": "Usunięto sieć „{0}”",
+ "claimProviderNotificationDeleteTitle": "Usuwanie znakowania „{0}”",
+ "claimProviderNotificationUpdateDescription": "Aktualizowanie kontrolki niestandardowej o nazwie „{0}”",
+ "claimProviderNotificationUpdateFailedDescription": "Zaktualizowanie kontrolki niestandardowej „{0}” nie powiodło się. Spróbuj ponownie później.",
+ "claimProviderNotificationUpdateFailedTitle": "Nie można zaktualizować kontrolki niestandardowej",
+ "claimProviderNotificationUpdateSuccessDescription": "Zaktualizowano kontrolkę niestandardową o nazwie „{0}”",
+ "claimProviderNotificationUpdateSuccessTitle": "Zaktualizowano sieć „{0}”",
+ "claimProviderNotificationUpdateTitle": "Aktualizowanie sieci „{0}”",
+ "claimProviderValidationAppIdInvalid": "Wartość „AppId” jest nieprawidłowa. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationClientIdMissing": "W danych brakuje wartości „ClientId”. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationControlClaimsRequestedMissing": "W elemencie „Control” brakuje wartości „ClaimsRequested”. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "W elemencie „ClaimsRequested” brakuje wartości „Type”. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationControlIdAlreadyExists": "Wartość „Id” elementu „Control” już istnieje. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationControlIdMissing": "W elemencie „Control” brakuje wartości „Id”. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "Nie można usunąć wartości „Id” elementu „Control”, ponieważ istnieje do niej odwołanie w istniejących zasadach. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationControlIdTooManyControls": "Właściwość „Control” zawiera zbyt wiele kontrolek. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationControlIdValueReserved": "Wartość „Id” elementu „Control” jest zastrzeżonym słowem kluczowym. Użyj innego identyfikatora.",
+ "claimProviderValidationControlNameAlreadyExists": "Wartość „Name” elementu „Control” już istnieje. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationControlNameMissing": "W elemencie „Control” brakuje wartości „Name”. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationControlsMissing": "W danych brakuje wartości „Controls”. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationDiscoveryUrlMissing": "W danych brakuje wartości „DiscoveryUrl”. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationInvalid": "Podane dane są nieprawidłowe. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationInvalidJsonDefinition": "Nie można zapisać kontrolki niestandardowej. Przejrzyj tekst w formacie JSON i spróbuj ponownie.",
+ "claimProviderValidationNameAlreadyExists": "Wartość „Name” już istnieje. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationNameMissing": "W danych brakuje wartości „Name”. Sprawdź to i spróbuj ponownie.",
+ "claimProviderValidationUnknown": "Wystąpił nieznany błąd podczas weryfikowania podanych danych. Sprawdź to i spróbuj ponownie.",
+ "claimProvidersNone": "Brak kontrolek niestandardowych",
+ "claimProvidersSearchPlaceholder": "Wyszukaj kontrolki.",
+ "classicPoilcyFilterTitle": "Pokaż",
+ "classicPolicyAllPlatforms": "Wszystkie platformy",
+ "classicPolicyClientAppBrowserAndNative": "Przeglądarka, aplikacje mobilne i klienci komputerowi",
+ "classicPolicyCloudAppTitle": "Aplikacja w chmurze",
+ "classicPolicyControlAllow": "Zezwól",
+ "classicPolicyControlBlock": "Blokuj",
+ "classicPolicyControlBlockWhenNotAtWork": "Zablokuj dostęp poza pracą",
+ "classicPolicyControlRequireCompliantDevice": "Wymagaj zgodnego urządzenia",
+ "classicPolicyControlRequireDomainJoinedDevice": "Wymagaj urządzenia połączonego z domeną",
+ "classicPolicyControlRequireMfa": "Wymagaj uwierzytelniania wieloskładnikowego",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Wymagaj uwierzytelniania wieloskładnikowego poza miejscem pracy",
+ "classicPolicyDeleteCommand": "Usuń",
+ "classicPolicyDeleteFailTitle": "Nie można usunąć zasad klasycznych",
+ "classicPolicyDeleteInProgressTitle": "Usuwanie zasad klasycznych",
+ "classicPolicyDeleteSuccessTitle": "Zasady klasyczne usunięte",
+ "classicPolicyDetailBladeTitle": "Szczegóły",
+ "classicPolicyDisableCommand": "Wyłącz",
+ "classicPolicyDisableConfirmation": "Czy na pewno chcesz wyłączyć „{0}”? Tej akcji nie można cofnąć.",
+ "classicPolicyDisableFailDescription": "Nie można wyłączyć zasad „{0}”",
+ "classicPolicyDisableFailTitle": "Nie można wyłączyć zasad klasycznych",
+ "classicPolicyDisableInProgressDescription": "Wyłączanie zasad „{0}”",
+ "classicPolicyDisableInProgressTitle": "Wyłączanie zasad klasycznych",
+ "classicPolicyDisableSuccessDescription": "Pomyślnie wyłączono zasady „{0}”",
+ "classicPolicyDisableSuccessTitle": "Zasady klasyczne wyłączone",
+ "classicPolicyEasSupportedPlatforms": "Obsługiwane platformy usługi Exchange ActiveSync",
+ "classicPolicyEasUnsupportedPlatforms": "Nieobsługiwane platformy usługi Exchange ActiveSync",
+ "classicPolicyExcludedPlatformsTitle": "Wykluczone platformy urządzeń",
+ "classicPolicyFilterAll": "Wszystkie zasady",
+ "classicPolicyFilterDisabled": "Wyłączone zasady",
+ "classicPolicyFilterEnabled": "Włączone zasady",
+ "classicPolicyIncludeExcludeMembersDescription": "Wykluczając grupy, można przeprowadzić stopniową migrację zasad.",
+ "classicPolicyIncludeExcludeMembersTitle": "Uwzględnianie/wykluczanie grup",
+ "classicPolicyIncludedPlatformsTitle": "Uwzględnione platformy sprzętowe",
+ "classicPolicyManualMigrationMessage": "Te zasady muszą zostać zmigrowane ręcznie.",
+ "classicPolicyMigrateCommand": "Migruj",
+ "classicPolicyMigrateConfirmation": "Czy na pewno chcesz przeprowadzić migrację zasad „{0}”? Te zasady można migrować tylko raz.",
+ "classicPolicyMigrateFailDescription": "Nie można migrować zasad „{0}”",
+ "classicPolicyMigrateFailTitle": "Nie można przeprowadzić migracji zasad klasycznych",
+ "classicPolicyMigrateInProgressDescription": "Migrowanie zasad „{0}”",
+ "classicPolicyMigrateInProgressTitle": "Migrowanie zasad klasycznych",
+ "classicPolicyMigrateRecommendText": "Zalecenie: wykonać migrację do zasad nowego portalu Azure.",
+ "classicPolicyMigrateSuccessTitle": "Migracja zasad klasycznych zakończona powodzeniem",
+ "classicPolicyMigratedSuccessDescription": "Tymi klasycznymi zasadami można teraz zarządzać w obszarze Zasady.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "Te zasady klasyczne są migrowane jako nowe zasady {0}. Nowymi zasadami można zarządzać w obszarze Zasady.",
+ "classicPolicyNoEditPermissionMsg": "Nie masz uprawnień do edytowania tych zasad. Tylko administratorzy globalni i administratorzy zabezpieczeń mogą edytować zasady. Kliknij tutaj, aby uzyskać więcej informacji.",
+ "classicPolicySaveFailDescription": "Nie można zapisać zasad „{0}”",
+ "classicPolicySaveFailTitle": "Nie można zapisać zasad klasycznych",
+ "classicPolicySaveInProgressDescription": "Zapisywanie zasad „{0}”",
+ "classicPolicySaveInProgressTitle": "Zapisywanie zasad klasycznych",
+ "classicPolicySaveSuccessDescription": "Pomyślnie zapisano zasady „{0}”",
+ "classicPolicySaveSuccessTitle": "Zasady klasyczne zapisane",
+ "clientAppBladeLegacyInfoBanner": "Starsza metoda uwierzytelniania nie jest obecnie obsługiwana",
+ "clientAppBladeLegacyUpsellBanner": "Blokuj nieobsługiwane aplikacje klienckie (wersja zapoznawcza)",
+ "clientAppBladeTitle": "Aplikacje klienckie",
+ "clientAppDescription": "Wybierz aplikacje klienckie, do których zostaną zastosowane te zasady",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Program Exchange ActiveSync obecnie nie obsługuje wszystkich pozostałych warunków",
+ "clientAppLearnMore": "Kontroluj dostęp użytkowników do konkretnych docelowych aplikacji klienckich, które nie używają nowoczesnego uwierzytelniania.",
+ "clientAppLegacyHeader": "Klienci ze starszym uwierzytelnianiem",
+ "clientAppMobileDesktop": "Aplikacje mobilne i klienci stacjonarni",
+ "clientAppModernHeader": "Klienci z nowoczesnym uwierzytelnianiem",
+ "clientAppOnlySupportedPlatforms": "Zastosuj zasady tylko do obsługiwanych platform",
+ "clientAppSelectSpecificClientApps": "Wybierz aplikacje klienckie",
+ "clientAppWebBrowser": "Przeglądarka",
+ "clientAppsSelectedLabel": "Włączono: {0}",
+ "clientTypeBrowser": "Przeglądarka",
+ "clientTypeEas": "Klienci programu Exchange ActiveSync",
+ "clientTypeEasInfo": "Tylko klienci Exchange ActiveSync używający starszego uwierzytelniania.",
+ "clientTypeModernAuth": "Nowocześni klienci uwierzytelniania",
+ "clientTypeOtherClients": "Inni klienci",
+ "clientTypeOtherClientsInfo": "Obejmuje to starszych klientów pakietu Office oraz inne protokoły pocztowe (POP, IMAP, SMTP itp.). [Dowiedz się więcej][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "Z katalogu usunięto aplikacje w chmurze ({0}) skonfigurowane w ramach tych zasad, ale nie ma to wpływu na inne aplikacje w zasadach. Przy następnej aktualizacji sekcji aplikacji zasad usunięte aplikacje zostaną automatycznie z niej skasowane.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Wszystkie aplikacje firmy Microsoft",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Zezwalaj na aplikacje w chmurze, klasyczne i mobilne firmy Microsoft (wersja zapoznawcza)",
+ "cloudappsSelectionBladeAllCloudapps": "Wszystkie aplikacje w chmurze",
+ "cloudappsSelectionBladeExcludeDescription": "Wybierz aplikacje w chmurze, które zostaną wykluczone z zasad",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Wybierz wykluczone aplikacje w chmurze",
+ "cloudappsSelectionBladeIncludeDescription": "Wybierz aplikacje w chmurze, do których będą mieć zastosowanie te zasady",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Wybierz",
+ "cloudappsSelectionBladeSelectedCloudapps": "Wybierz aplikacje",
+ "cloudappsSelectorInfoBallonText": "Usługi, do których użytkownik uzyskuje dostęp w celu wykonania pracy. Na przykład „Salesforce”",
+ "cloudappsSelectorPluralExcluded": "Wykluczone aplikacje: {0}",
+ "cloudappsSelectorPluralIncluded": "Uwzględnione aplikacje: {0}",
+ "cloudappsSelectorSingularExcluded": "Wykluczono 1 aplikację",
+ "cloudappsSelectorSingularIncluded": "Uwzględniono 1 aplikację",
+ "cloudappsSelectorUserPlural": "Aplikacje: {0}",
+ "cloudappsSelectorUserSingular": "1 aplikacja",
+ "conditionLabelMulti": "Wybrane warunki: {0}",
+ "conditionLabelOne": "Wybrano 1 warunek",
+ "conditionalAccessBladeTitle": "Dostęp warunkowy",
+ "conditionsNotSelectedLabel": "Nie skonfigurowano",
+ "conditionsReqMfaReauthSet": "Niektóre opcje są niedostępne z powodu udzielenia uprawnienia „Wymagaj uwierzytelniania wieloskładnikowego” i aktualnie wybrano kontrolkę sesji „Częstotliwość operacji logowania za każdym razem”",
+ "conditionsReqPwSet": "Niektóre opcje są niedostępne z powodu udzielenia „Wymagaj zmiany hasła”, które jest obecnie wybrane",
+ "configureCasText": "Skonfiguruj usługę Cloud App Security",
+ "configureCustomControlsText": "Skonfiguruj zasady niestandardowe",
+ "controlLabelMulti": "Wybrane kontrolki: {0}",
+ "controlLabelOne": "Wybrano 1 kontrolkę",
+ "controlValidatorText": "Wybierz co najmniej jedną kontrolkę",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Dowiedz się więcej o wymaganiach zgodnych urządzeń.",
+ "controlsDeviceComplianceInfoBubble": "Urządzenie musi być zgodne z usługą Intune. Jeśli urządzenie jest niezgodne, użytkownikowi zostanie wyświetlony monit o doprowadzenie urządzenia do stanu zgodności.",
+ "controlsDomainJoinedAriaLabel": "Dowiedz się więcej o wymaganiach urządzeń dołączonych hybrydowo do rozwiązania Microsoft Entra.",
+ "controlsDomainJoinedInfoBubble": "Urządzenia muszą być dołączone hybrydowo do usługi Microsoft Entra.",
+ "controlsMamAriaLabel": "Dowiedz się więcej o wymaganiach zatwierdzonych aplikacji klienckich.",
+ "controlsMamInfoBubble": "Urządzenie musi używać tych zatwierdzonych aplikacji klienckich.",
+ "controlsMfaInfoBubble": "Użytkownik musi spełnić dodatkowe wymagania dotyczące zabezpieczeń, takie jak połączenie telefoniczne, wiadomość SMS",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Dowiedz się więcej o wymaganiach aplikacji chronionych przez zasady.",
+ "controlsRequireCompliantAppInfoBubble": "Urządzenie musi używać aplikacji chronionych przez zasady.",
+ "controlsRequirePasswordResetAriaLabel": "Dowiedz się więcej o konieczności zmiany hasła.",
+ "controlsRequirePasswordResetInfoBubble": "Wymagaj zmiany hasła, aby zmniejszyć ryzyko związane z użytkownikiem. Ta opcja wymaga również uwierzytelniania wieloskładnikowego. Nie można użyć innych kontrolek.",
+ "countriesRadiobuttonInfoBalloonContent": "Kraj/region, z którego ma miejsce logowanie, jest określany na podstawie adresu IP użytkownika.",
+ "createNewVpnCert": "Nowy certyfikat",
+ "createdTimeLabel": "Godzina utworzenia",
+ "customRoleLabel": "Role niestandardowe (nieobsługiwane)",
+ "dateRangeTypeLabel": "Zakres dat",
+ "daysOfWeekPlaceholderText": "Filtruj dni tygodnia",
+ "daysOfWeekTypeLabel": "Dni tygodnia",
+ "deletePolicyNoLicenseText": "Teraz możesz usunąć te zasady. Po usunięciu nie będziesz w stanie utworzyć ich ponownie, dopóki nie uzyskasz wymaganych licencji.",
+ "descriptionContentForControlsAndOr": "W przypadku wielu kontrolek",
+ "devicePlatform": "Platforma urządzeń",
+ "devicePlatformConditionHelpDescription": "Zastosuj zasady do wybranych platform urządzeń.\n[Dowiedz się więcej][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "Włączono: {0}",
+ "devicePlatformIncludeExclude": "Wykluczono {0} i {1}",
+ "devicePlatformNoSelectionError": "Wybieranie platform urządzeń wymaga wybrania jednego elementu podrzędnego.",
+ "devicePlatformsNone": "Brak",
+ "deviceSelectionBladeExcludeDescription": "Wybierz platformy, zostaną wykluczone z zasad",
+ "deviceSelectionBladeIncludeDescription": "Wybierz platformy urządzeń, które będą objęte tymi zasadami",
+ "deviceStateAll": "Stan wszystkich urządzeń",
+ "deviceStateCompliant": "Urządzenie oznaczone jako zgodne",
+ "deviceStateCompliantInfoContent": "Urządzenia zgodne z usługą Intune zostaną wykluczone z oceny tych zasad, więc jeśli na przykład zasady blokują dostęp, spowoduje to zablokowanie wszystkich urządzeń z wyjątkiem urządzeń zgodnych z usługą Intune.",
+ "deviceStateConditionConfigureInfoContent": "Konfigurowanie zasad na podstawie stanu urządzenia",
+ "deviceStateConditionSelectorInfoContent": "Niezależnie od tego, czy urządzenie, z poziomu z którego loguje się użytkownik, ma wartość „Dołączone hybrydowo do usługi Microsoft Entra”, czy „oznaczone jako zgodne”.\n Ta funkcja jest przestarzała. Zamiast tego użyj „{1}”.",
+ "deviceStateConditionSelectorLabel": "Stan urządzenia (przestarzałe)",
+ "deviceStateDomainJoined": "Urządzenie dołączone hybrydowo do usługi Microsoft Entra",
+ "deviceStateDomainJoinedInfoContent": "Urządzenia przyłączone hybrydowo do usługi Microsoft Entra zostaną wykluczone z oceny tych zasad, więc jeśli na przykład zasady blokują dostęp, spowoduje to zablokowanie wszystkich urządzeń z wyjątkiem urządzeń przyłączonych hybrydowo do usługi Microsoft Entra.",
+ "deviceStateDomainJoinedInfoLinkText": "Dowiedz się więcej.",
+ "deviceStateExcludeDescription": "Wybierz warunek stanu urządzenia używany do wykluczania urządzeń z zasad.",
+ "deviceStateIncludeAndExcludeOneLabel": "Dołącz: {0}. Wyklucz: {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "Dołącz: {0}. Wyklucz: {1}, {2}",
+ "directoryRoleInfoContent": "Przypisz zasady do wbudowanych ról katalogów.",
+ "directoryRolesLabel": "Role katalogu",
+ "discardbutton": "Odrzuć",
+ "downloadDefaultFileName": "Zakresy adresów IP",
+ "downloadExampleFileName": "Przykład",
+ "downloadExampleHeader": "To jest przykładowy plik z demonstracjami rodzajów danych, które mogą zostać zaakceptowane. Wiersze rozpoczynające się znakiem # zostaną zignorowane.",
+ "duplicate": "Duplikuj",
+ "duplicatePolicyName": "KOPIUJ {0}",
+ "endDatePickerLabel": "Końce",
+ "endTimePickerLabel": "Godzina zakończenia",
+ "enterCountryText": "Adres IP i kraj/region są przetwarzane razem. Wybierz kraj/region.",
+ "enterIpText": "Adres IP i kraj/region są przetwarzane razem. Podaj adres IP.",
+ "enterUserText": "Nie wybrano żadnego użytkownika. Wybierz go.",
+ "evaluationResult": "Wynik oceny",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Tylko usługa Exchange ActiveSync z obsługiwanymi platformami",
+ "excludeAllTrustedLocationSelectorText": "wszystkie zaufane lokalizacje",
+ "featureRequiresP2": "Ta funkcja wymaga licencji Microsoft Entra ID P2.",
+ "friday": "Piątek",
+ "grantControls": "Udziel kontroli",
+ "gridNetworkTrusted": "Zaufane",
+ "gridPolicyCreatedDateTime": "Data utworzenia",
+ "gridPolicyEnabled": "Włączono",
+ "gridPolicyModifiedDateTime": "Data modyfikacji",
+ "gridPolicyName": "Nazwa zasad",
+ "gridPolicyState": "Stan",
+ "groupSelectionBladeExcludeDescription": "Wybierz grupy, wobec których zostanie zastosowane wykluczenie z zasad",
+ "groupSelectionBladeExcludedSelectorTitle": "Wybieranie grup wykluczonych",
+ "groupSelectionBladeSelect": "Wybieranie grup",
+ "groupSelectorInfoBallonText": "Grupy w katalogu, wobec których zostaną zastosowane zasady. Przykład: „grupa pilotażowa”",
+ "groupsSelectionBladeTitle": "Grupy",
+ "helpCommonScenariosText": "Chcesz zapoznać się z typowymi scenariuszami?",
+ "helpCondition1": "Gdy jakikolwiek użytkownik znajduje się poza siecią firmową",
+ "helpCondition2": "Gdy użytkownicy z grupy „Menedżerowie” logują się",
+ "helpConditionsTitle": "Warunki",
+ "helpControl1": "Wymagane jest zalogowanie się za pomocą uwierzytelniania wieloskładnikowego",
+ "helpControl2": "Wymagane jest od nich używanie urządzenia zgodnego z usługą Intune lub urządzenia przyłączonego do domeny",
+ "helpControlsTitle": "Formanty",
+ "helpIntroText": "Dostęp warunkowy umożliwia wymuszanie wymagań dotyczących dostępu, gdy wystąpią określone warunki. Poniżej przedstawionych jest kilka przykładów",
+ "helpIntroTitle": "Co to jest dostęp warunkowy?",
+ "helpLearnMoreText": "Chcesz dowiedzieć się więcej na temat dostępu warunkowego?",
+ "helpStartStep1": "Utwórz pierwszą zasadę, klikając pozycję „+ Nowe zasady”",
+ "helpStartStep2": "Określ warunki i kontrolki zasad",
+ "helpStartStep3": "Gdy wszystko będzie gotowe, nie zapomnij włączyć zasad i utworzyć",
+ "helpStartTitle": "Rozpocznij",
+ "highRisk": "Wysokie",
+ "includeAndExcludeAppsTextFormat": "Uwzględnij: {0}. Wyklucz: {1}.",
+ "includeAppsTextFormat": "Uwzględnij: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Nieznane obszary to adresy IP, których nie można mapować na kraj/region.",
+ "includeUnknownAreasCheckboxLabel": "Uwzględnij nieznane obszary",
+ "infoCommandLabel": "Informacje",
+ "invalidCertDuration": "Nieprawidłowy czas trwania certyfikatu",
+ "invalidIpAddress": "Wartość musi być prawidłowym adresem IP",
+ "invalidReAuthSignInRiskOptionSelected": "Kontrola sesji „częstotliwość logowania za każdym razem” nie zezwala na wybór opcji „brak ryzyka” w kontrolce warunku „poziom ryzyka logowania”.",
+ "invalidUriErrorMsg": "Wprowadź prawidłowy identyfikator Uri. Przykład: „uri:contoso.com:acr” ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Załaduj wszystko",
+ "loading": "Trwa ładowanie...",
+ "locationConfigureNamedLocationsText": "Konfiguruj wszystkie zaufane lokalizacje",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Nazwa lokalizacji jest za długa. Maksymalna długość to 256 znaków",
+ "locationSelectionBladeExcludeDescription": "Wybierz lokalizacje, które zostaną wykluczone z zasad",
+ "locationSelectionBladeIncludeDescription": "Wybierz lokalizacje, które mają zostać dołączone do tych zasad",
+ "locationsAllLocationsLabel": "Dowolna lokalizacja",
+ "locationsAllNamedLocationsLabel": "Wszystkie zaufane adresy IP",
+ "locationsAllPrivateLinksLabel": "Wszystkie prywatne linki w mojej dzierżawie",
+ "locationsIncludeExcludeLabel": "{0} i wyklucz wszystkie zaufane adresy IP",
+ "locationsSelectedPrivateLinksLabel": "Wybrane łącza prywatne",
+ "lowRisk": "Niskie",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "Aby zarządzać zasadami dostępu warunkowego, Twoja organizacja potrzebuje usługi Microsoft Entra ID P1 lub P2.",
+ "manageSecurityDefaultsAriaLabel": "Zarządzaj ustawieniami domyślnymi zabezpieczeń.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Logowanie z zaufanej lokalizacji obniża ryzyko związane z logowaniem użytkownika. Oznacz tę lokalizację jako zaufaną tylko wtedy, jeśli wprowadzone zakresy adresów IP są uznawane za znane i wiarygodne w Twojej organizacji.",
+ "markAsTrustedCheckboxLabel": "Oznacz jako zaufaną lokalizację",
+ "mediumRisk": "Średnie",
+ "memberSelectionCommandRemove": "Usuń",
+ "menuItemClaimProviderControls": "Kontrolki niestandardowe (wersja zapoznawcza)",
+ "menuItemClassicPolicies": "Zasady klasyczne",
+ "menuItemInsightsAndReporting": "Szczegółowe informacje i raportowanie",
+ "menuItemManage": "Zarządzaj",
+ "menuItemNamedLocationsPreview": "Nazwane lokalizacje (wersja zapoznawcza)",
+ "menuItemNamedNetworks": "Nazwane lokalizacje",
+ "menuItemPolicies": "Zasady",
+ "menuItemTermsOfUse": "Warunki użytkowania",
+ "modifiedTimeLabel": "Godzina modyfikacji",
+ "monday": "Poniedziałek",
+ "nameLabel": "Nazwa",
+ "namedLocationCountryInfoBanner": "Tylko adresy IPv4 są mapowane na kraje/regiony. Adresy IPv6 są dołączane w przypadku nieznanych krajów/regionów.",
+ "namedLocationTypeCountry": "Kraje/regiony",
+ "namedLocationTypeLabel": "Zdefiniuj lokalizację za pomocą:",
+ "namedLocationUpsellBanner": "Ten widok jest przestarzały. Przejdź do nowego i ulepszonego widoku \"Nazwane lokalizacje\".",
+ "namedLocationsHelpDescription": "Nazwane lokalizacje są używane przez raporty zabezpieczeń usługi Microsoft Entra ID w celu zmniejszenia liczby wyników fałszywie dodatnich i zasad dostępu warunkowego usługi Microsoft Entra.\n[Dowiedz się więcej][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Dodaj nowy zakres adresów IP (np. 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "Należy wybrać co najmniej jeden kraj/region",
+ "namedNetworkDeleteCommand": "Usuń",
+ "namedNetworkDeleteDescription": "Czy na pewno chcesz usunąć „{0}”? Tej akcji nie można cofnąć.",
+ "namedNetworkDeleteTitle": "Czy na pewno?",
+ "namedNetworkDownloadIpRange": "Pobierz",
+ "namedNetworkInvalidRange": "Wartość musi być prawidłowym zakresem adresów IP.",
+ "namedNetworkIpRangeNeeded": "Wymagany jest co najmniej jeden prawidłowy zakres adresów IP",
+ "namedNetworkIpRangesDescriptionContent": "Skonfiguruj zakresy adresów IP w organizacji",
+ "namedNetworkIpRangesTab": "Zakresy adresów IP",
+ "namedNetworkListAdd": "Nowa lokalizacja",
+ "namedNetworkListConfigureTrustedIps": "Konfiguruj zaufane adresy IP z uwierzytelnianiem wieloskładnikowym",
+ "namedNetworkNameDescription": "Przykład: „biuro w Redmond”",
+ "namedNetworkNameInvalid": "Podana nazwa jest nieprawidłowa.",
+ "namedNetworkNameRequired": "Musisz podać nazwę dla tej lokalizacji.",
+ "namedNetworkNoIpRanges": "Brak zakresów adresów IP",
+ "namedNetworkNotificationCreateDescription": "Tworzenie lokalizacji o nazwie „{0}”",
+ "namedNetworkNotificationCreateFailedDescription": "Nie można utworzyć lokalizacji „{0}”. Spróbuj ponownie później.",
+ "namedNetworkNotificationCreateFailedTitle": "Nie można utworzyć lokalizacji",
+ "namedNetworkNotificationCreateSuccessDescription": "Utworzono lokalizację o nazwie „{0}”",
+ "namedNetworkNotificationCreateSuccessTitle": "Utworzono sieć „{0}”",
+ "namedNetworkNotificationCreateTitle": "Tworzenie sieci „{0}”",
+ "namedNetworkNotificationDeleteDescription": "Usuwanie lokalizacji o nazwie „{0}”",
+ "namedNetworkNotificationDeleteFailedDescription": "Nie można usunąć lokalizacji „{0}”. Spróbuj ponownie później.",
+ "namedNetworkNotificationDeleteFailedTitle": "Nie można usunąć lokalizacji",
+ "namedNetworkNotificationDeleteSuccessDescription": "Usunięto lokalizację o nazwie „{0}”",
+ "namedNetworkNotificationDeleteSuccessTitle": "Usunięto sieć „{0}”",
+ "namedNetworkNotificationDeleteTitle": "Usuwanie znakowania „{0}”",
+ "namedNetworkNotificationUpdateDescription": "Aktualizowanie lokalizacji o nazwie „{0}”",
+ "namedNetworkNotificationUpdateFailedDescription": "Nie można zaktualizować lokalizacji „{0}”. Spróbuj ponownie później.",
+ "namedNetworkNotificationUpdateFailedTitle": "Nie można zaktualizować lokalizacji",
+ "namedNetworkNotificationUpdateSuccessDescription": "Zaktualizowano lokalizację o nazwie „{0}”",
+ "namedNetworkNotificationUpdateSuccessTitle": "Zaktualizowano sieć „{0}”",
+ "namedNetworkNotificationUpdateTitle": "Aktualizowanie sieci „{0}”",
+ "namedNetworkSearchPlaceholder": "Wyszukaj lokalizacje.",
+ "namedNetworkUploadFailedDescription": "Wystąpił błąd podczas analizowania dostarczonego pliku. Przekaż zwykły plik tekstowy, w którym każdy wiersz ma format CIDR.",
+ "namedNetworkUploadFailedTitle": "Nie można przeanalizować wartości „{0}”",
+ "namedNetworkUploadInProgressDescription": "Próba przeanalizowania prawidłowych wartości CIDR z pliku „{0}”.",
+ "namedNetworkUploadInProgressTitle": "Analizowanie pliku „{0}”",
+ "namedNetworkUploadInvalidDescription": "Plik „{0}” jest zbyt duży lub ma nieprawidłowy format.",
+ "namedNetworkUploadInvalidTitle": "Plik „{0}” jest nieprawidłowy",
+ "namedNetworkUploadIpRange": "Przekaż",
+ "namedNetworkUploadSuccessDescription": "Przeanalizowane wiersze: {0}. Nieprawidłowy format: {1}. Pominięto: {2}.",
+ "namedNetworkUploadSuccessTitle": "Zakończono analizowanie pliku „{0}”",
+ "namedNetworksAdd": "Nowa nazwana lokalizacja",
+ "namedNetworksConditionHelpDescription": "Kontrola dostępu użytkownika na podstawie jego fizycznej lokalizacji.\n[Dowiedz się więcej][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "Wykluczono {0} i {1}",
+ "namedNetworksHelpDescription": "Nazwane lokalizacje są używane przez raporty zabezpieczeń Microsoft Entra ID w celu zmniejszenia liczby wyników fałszywie dodatnich i zasad dostępu warunkowego usługi Microsoft Entra.\n[Dowiedz się więcej][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "Włączono: {0}",
+ "namedNetworksNone": "Nie odnaleziono żadnej nazwanej lokalizacji.",
+ "namedNetworksTitle": "Skonfiguruj lokalizacje",
+ "namednetworkExceedingSizeErrorBladeTitle": "Szczegóły błędu",
+ "namednetworkExceedingSizeErrorDetailText": "Kliknij tutaj, aby uzyskać więcej informacji.",
+ "namednetworkExceedingSizeErrorMessage": "Przekroczono maksymalny dozwolony rozmiar magazynu dla nazwanych lokalizacji. Spróbuj ponownie, używając krótszej listy. Kliknij tutaj, aby wyświetlić więcej szczegółów.",
+ "needMfaSecondary": "Gdy opcja „Częstotliwość operacji logowania za każdym razem” jest wybierana wraz z opcją „Tylko pomocnicze metody uwierzytelniania”, należy wybrać opcję „Wymagaj uwierzytelniania wieloskładnikowego”",
+ "needMfaSpecificApps": "Mechanizm kontroli sesji „Częstotliwość operacji logowania za każdym razem” wymaga udzielenia kontroli „Wymagaj uwierzytelniania wieloskładnikowego” w przypadku wybrania specjalnie obsługiwanych aplikacji",
+ "newCertName": "nowy certyfikat",
+ "noAttributePermissionsError": "Niewystarczające uprawnienia do tworzenia lub aktualizowania zasad. Do dodawania/edytowania filtrów dynamicznych wymagana jest rola czytnika definicji atrybutów.",
+ "noPolicyRowMessage": "Brak zasad",
+ "noSPSelected": "Nie wybrano jednostki usługi",
+ "noUpdatePermissionMessage": "Nie masz uprawnień do aktualizowania tych ustawień. Skontaktuj się z administratorem globalnym, aby uzyskać dostęp.",
+ "noUserSelected": "Nie wybrano żadnego użytkownika",
+ "noneRisk": "Nie ma ryzyka",
+ "office365Description": "Te aplikacje to między innymi Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online i Office 365 Yammer.",
+ "office365InfoBox": "Co najmniej jedna z wybranych aplikacji jest częścią usługi Office 365. Zalecamy ustawienie zasad w aplikacji Office 365.",
+ "oneUserSelected": "Wybrano jednego użytkownika",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Tylko administratorzy globalni mogą zapisać te zasady.",
+ "or": "{0} LUB {1}",
+ "pickerDoneCommand": "Gotowe",
+ "policiesBladeAdPremiumUpsellBannerText": "Twórz własne zasady i określaj konkretne warunki docelowe, takie jak aplikacje w chmurze, ryzyko związane z logowaniem i platformy urządzeń, za pomocą usługi Microsoft Entra ID w warstwie Premium.",
+ "policiesBladeTitle": "Zasady",
+ "policiesBladeTitleWithAppName": "Zasady: {0}",
+ "policiesDisabledBannerText": "Tworzenie i edytowanie zasad jest zabronione w przypadku aplikacji z atrybutem połączonego logowania.",
+ "policiesHitMaxLimitStatusBarMessage": "Osiągnięto maksymalną liczbę zasad dla tej dzierżawy. Usuń zasady przed utworzeniem nowych.",
+ "policyAssignmentsSection": "Przypisania",
+ "policyBlockAllInfoBox": "Skonfigurowane zasady zablokują wszystkich użytkowników, więc nie są one obsługiwane. Przejrzyj przypisania i kontrolki. Jeśli chcesz zapisać te zasady, wyklucz bieżącego użytkownika {0}.",
+ "policyCloudAppsDisplayTextAllApp": "Wszystkie aplikacje",
+ "policyCloudAppsLabel": "Aplikacje w chmurze",
+ "policyConditionClientAppDescription": "Oprogramowanie używane przez użytkownika do uzyskania dostępu do aplikacji w chmurze. Przykład: „przeglądarka”",
+ "policyConditionClientAppV2Description": "Oprogramowanie używane przez użytkownika do uzyskania dostępu do aplikacji w chmurze. Przykład: „przeglądarka”",
+ "policyConditionDevicePlatform": "Platformy urządzeń",
+ "policyConditionDevicePlatformDescription": "Platforma, z której loguje się użytkownik. Przykład: „iOS”",
+ "policyConditionLocation": "Lokalizacje",
+ "policyConditionLocationDescription": "Lokalizacja (ustalana podstawie zakresu adresów IP), z której loguje się użytkownik",
+ "policyConditionLocationPreview": "Lokalizacje (wersja zapoznawcza)",
+ "policyConditionSigninRisk": "Ryzyko logowania",
+ "policyConditionSigninRiskDescription": "Prawdopodobieństwo, że loguje się ktoś inny niż użytkownik. Poziom ryzyka może być wysoki, średni lub niski. Wymaga licencji usługi Microsoft Entra ID P2.",
+ "policyConditionUserRisk": "Ryzyko związane z użytkownikiem",
+ "policyConditionUserRiskDescription": "Konfigurowanie poziomów ryzyka związanego z użytkownikiem potrzebnych do wymuszania zasad",
+ "policyConditioniClientApp": "Aplikacje klienckie",
+ "policyControlAllowAccessDisplayedName": "Przyznaj dostęp",
+ "policyControlAuthenticationStrengthDisplayedName": "Wymagaj siły uwierzytelniania (wersja zapoznawcza)",
+ "policyControlBladeTitle": "Udziel",
+ "policyControlBlockAccessDisplayedName": "Blokuj dostęp",
+ "policyControlCompliantDeviceDisplayedName": "Wymagaj, aby urządzenie było oznaczone jako zgodne",
+ "policyControlContentDescription": "Kontroluj wymuszanie dostępu, aby udzielać dostępu lub go blokować.",
+ "policyControlInfoBallonText": "Zablokuj dostęp lub wybierz dodatkowe wymagania, które będą musiały zostać spełnione, aby uzyskać zezwolenie na dostęp",
+ "policyControlMfaChallengeDisplayedName": "Wymagaj uwierzytelniania wieloskładnikowego",
+ "policyControlRequireCompliantAppDisplayedName": "Wymagaj zasad ochrony aplikacji",
+ "policyControlRequireDomainJoinedDisplayedName": "Wymagaj urządzenia dołączonego hybrydowo do usługi Microsoft Entra",
+ "policyControlRequireMamDisplayedName": "Wymagaj zatwierdzonej aplikacji klienckiej",
+ "policyControlRequiredPasswordChangeDisplayedName": "Wymagaj zmiany hasła",
+ "policyControlSelectAuthStrength": "Wymagaj siły uwierzytelniania",
+ "policyControlsNoControlsSelected": "Nie wybrano żadnej kontrolki",
+ "policyControlsSection": "Kontrole dostępu",
+ "policyCreatBladeTitle": "Nowy",
+ "policyCreateButton": "Utwórz",
+ "policyCreateFailedMessage": "Błąd: {0}",
+ "policyCreateFailedTitle": "Nie można utworzyć zasad „{0}”",
+ "policyCreateInProgressTitle": "Tworzenie sieci „{0}”",
+ "policyCreateSuccessMessage": "Pomyślnie utworzono zasady „{0}”. Zasady zostaną włączone w ciągu kilku minut, jeśli opcja „Włącz zasady” została ustawiona na „Wł.”.",
+ "policyCreateSuccessTitle": "Pomyślnie utworzono zasady „{0}”",
+ "policyDeleteConfirmation": "Czy na pewno chcesz usunąć „{0}”? Tej akcji nie można cofnąć.",
+ "policyDeleteFailTitle": "Nie można usunąć znakowania „{0}”",
+ "policyDeleteInProgressTitle": "Usuwanie znakowania „{0}”",
+ "policyDeleteSuccessTitle": "Pomyślnie usunięto znakowanie „{0}”",
+ "policyEnforceLabel": "Włącz zasady",
+ "policyErrorCannotSetSigninRisk": "Nie masz uprawnienia do zapisania zasad z warunkiem ryzyka logowania.",
+ "policyErrorNoPermission": "Nie masz uprawnień do zapisywania zasad. Skontaktuj się z administratorem globalnym.",
+ "policyErrorUnknown": "Wystąpił błąd, spróbuj ponownie później.",
+ "policyFallbackWarningMessage": "Nie można utworzyć lub zaktualizować zasad „{0}” przy użyciu funkcji MS Graph, co spowodowało rezerwowe użycie funkcji AD Graph. Zbadaj następujący scenariusz, ponieważ prawdopodobnie występuje błąd podczas wywoływania punktu końcowego zasad dla funkcji MS Graph z niezgodnym warunkiem.",
+ "policyFallbackWarningTitle": "Tworzenie lub aktualizowanie zasad „{0}” powiodło się częściowo",
+ "policyNameCannotBeEmpty": "Nazwa zasad nie może być pusta",
+ "policyNameDevice": "Zasady urządzeń",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Zasady zarządzania aplikacjami mobilnymi",
+ "policyNameMfaLocation": "Uwierzytelnianie wieloskładnikowe i zasady dotyczące lokalizacji",
+ "policyNamePlaceholderText": "Przykład: „zasady aplikacji dotyczące zgodności urządzeń”",
+ "policyNameTooLongError": "Nazwa zasad jest za długa. Maksymalna długość to 256 znaków",
+ "policyOff": "Wyłączone",
+ "policyOn": "Włączone",
+ "policyReportOnly": "Sam raport",
+ "policyReviewSection": "Przegląd",
+ "policySaveButton": "Zapisz",
+ "policyStatusIconDescription": "Zasady są włączone",
+ "policyStatusIconEnabled": "Włączona ikona stanu",
+ "policyTemplateName1": "Użyj wymuszonych ograniczeń aplikacji {0} w przypadku dostępu w przeglądarce",
+ "policyTemplateName2": "Zezwalaj na dostęp do aplikacji {0} tylko na urządzeniach zarządzanych",
+ "policyTemplateName3": "Zasady zmigrowane z ustawień ciągłej oceny dostępu",
+ "policyTriggerRiskSpecific": "Wybierz określony poziom ryzyka",
+ "policyTriggersInfoBalloonText": "Warunki definiujące, kiedy zasady zostaną zastosowane. Przykład: „lokalizacja”",
+ "policyTriggersNoConditionsSelected": "Nie wybrano żadnych warunków",
+ "policyTriggersSelectorLabel": "Warunki",
+ "policyUpdateFailedMessage": "Błąd: {0}",
+ "policyUpdateFailedTitle": "Nie można zaktualizować elementu {0}",
+ "policyUpdateInProgressTitle": "Aktualizowanie elementu {0}",
+ "policyUpdateSuccessMessage": "Pomyślnie zaktualizowano element {0}. Zasady zostaną włączone w ciągu kilku minut, jeśli opcja „Włącz zasady” jest ustawiona na „Wł.”.",
+ "policyUpdateSuccessTitle": "Pomyślnie zaktualizowano element {0}",
+ "primaryCol": "Podstawowe",
+ "privateLinkLabel": "Usługa Private Link usługi Microsoft Entra ID",
+ "reportOnlyInfoBox": "Tryb samego raportowania: zasady są oceniane i rejestrowane przy logowaniu, ale nie mają wpływu na użytkowników.",
+ "requireAllControlsText": "Wymagaj wszystkich wybranych kontrolek",
+ "requireCompliantDevice": "Wymagaj zgodnego urządzenia",
+ "requireDomainJoined": "Wymagaj urządzenia przyłączonego do domeny",
+ "requireGrantReauth": "Kontrolka sesji „Częstotliwość operacji logowania za każdym razem” wymaga udzielenia kontroli „Wymagaj uwierzytelniania wieloskładnikowego” lub „Wymagaj zmiany hasła” w przypadku wybrania opcji „Wszystkie aplikacje w chmurze”",
+ "requireMFA": "Wymagaj uwierzytelniania wieloskładnikowego",
+ "requireMfaReauth": "Kontrolka sesji „Częstotliwość operacji logowania za każdym razem” wymaga udzielenia kontroli „Wymagaj uwierzytelniania wieloskładnikowego” dla opcji „Ryzyko dotyczące operacji logowania”",
+ "requireOneControlText": "Wymagaj jednej z wybranych kontrolek",
+ "requirePasswordChangeReauth": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga kontroli nad udzielaniem „wymagaj zmiany hasła” dla „ryzyka związanego z użytkownikiem”",
+ "requireRiskReauth": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga kontroli sesji „ryzyko związane z użytkownikiem” lub „ryzyko logowania” po wybraniu opcji „wszystkie aplikacje w chmurze”.",
+ "requireRiskReauthRiskNotEnabled": "Kontrola sesji „częstotliwość logowania za każdym razem” jest niedostępna po wybraniu opcji „wszystkie aplikacje w chmurze”.",
+ "requireRiskReauthSignInOnly": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga kontroli sesji „ryzyko związane z logowaniem” po wybraniu opcji „wszystkie aplikacje w chmurze”.",
+ "requireRiskReauthUserOnly": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga kontroli sesji „ryzyko związane z użytkownikiem” po wybraniu opcji „wszystkie aplikacje w chmurze”.",
+ "resetFilters": "Resetuj filtry",
+ "sPRequired": "Wymagana jednostka usługi",
+ "sPSelectorInfoBalloon": "Użytkownik lub jednostka usługi, którą chcesz testować",
+ "saturday": "Sobota",
+ "searchTextTooLongError": "Wyszukiwany tekst jest za długi. Maksymalna liczba znaków to 256",
+ "securityDefaultsPolicyName": "Wartości domyślne zabezpieczeń",
+ "securityDefaultsTextMessage": "Wartości domyślne zabezpieczeń muszą być wyłączone, aby można było włączyć zasady dostępu warunkowego.",
+ "securityDefaultsUpdateInProgressText": "Trwa aktualizacja ustawień domyślnych zabezpieczeń. Poczekaj chwilę i spróbuj ponownie.",
+ "securityDefaultsWarningMessage": "Wygląda na to, że zamierzasz zarządzać konfiguracjami zabezpieczeń swojej organizacji. To świetnie! Przed włączeniem zasad dostępu warunkowego musisz najpierw {0}wyłączyć wartości domyślne zabezpieczeń{1}.",
+ "selectDevicePlatforms": "Wybierz platformy urządzeń",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Wybierz lokalizacje",
+ "selectedSP": "Wybrano jednostkę usługi",
+ "servicePrincipalBladeExcludedSelectorTitle": "Wybieranie wykluczonych jednostek usług",
+ "servicePrincipalBladeIncludedSelectorTitle": "Wybieranie jednostek usług",
+ "servicePrincipalDataGridAria": "Lista dostępnych jednostek usługi",
+ "servicePrincipalDropDownLabel": "Czego dotyczą te zasady?",
+ "servicePrincipalInfoBox": "Niektóre warunki są niedostępne z powodu wyboru elementu „{0}” w przypisaniu zasad",
+ "servicePrincipalRadioAll": "Wszystkie posiadane jednostki usługi",
+ "servicePrincipalRadioSelect": "Wybrane jednostki usługi",
+ "servicePrincipalSelectionsAria": "Siatka wybranych jednostek usługi",
+ "servicePrincipalSelectorAria": "Lista wybranych jednostek usługi",
+ "servicePrincipalSelectorMultiple": "Wybrane jednostki usługi: {0}",
+ "servicePrincipalSelectorSingle": "Wybrano 1 jednostkę usługi",
+ "servicePrincipalSpecificExc": "Wykluczone określone jednostki usługi",
+ "servicePrincipalSpecificInc": "Uwzględnione określone jednostki usługi",
+ "servicePrincipals": "Jednostki usługi",
+ "sessionControlBladeTitle": "Sesja",
+ "sessionControlDescriptionContent": "Kontroluj dostęp na podstawie kontrolek sesji, aby umożliwić korzystanie z ograniczonych środowisk w ramach określonych aplikacji w chmurze.",
+ "sessionControlDisableInfo": "Ta kontrola działa tylko w przypadku obsługiwanych aplikacji. Obecnie usługi Office 365, Exchange Online i SharePoint Online to jedyne aplikacje w chmurze, które obsługują ograniczenia wymuszone przez aplikację. Kliknij tutaj, aby dowiedzieć się więcej.",
+ "sessionControlInfoBallonText": "Kontrolki sesji umożliwiają korzystanie z ograniczonego środowiska w ramach aplikacji w chmurze.",
+ "sessionControls": "Kontrole sesji",
+ "sessionControlsAppEnforcedLabel": "Użyj ograniczeń wymuszonych przez aplikację",
+ "sessionControlsCasLabel": "Użyj Kontroli dostępu warunkowego aplikacji",
+ "sessionControlsSecureSignInLabel": "Wymagaj powiązania tokena",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "Włączono: {0}",
+ "signinRiskReauth": "Gdy wybrano udzielenie uprawnienia „Wymagaj uwierzytelniania wieloskładnikowego” i kontrolkę sesji „Częstotliwość operacji logowania za każdym razem”, należy wybrać warunek „Ryzyko dotyczące operacji logowania”",
+ "signinRiskTriggerDescriptionContent": "Wybierz poziom ryzyka logowania",
+ "singleTenantServicePrincipalInfoBallonText": "Zasady mają zastosowanie tylko do pojedynczych jednostek usługi dzierżawy należących do Twojej organizacji. Kliknij tutaj, aby dowiedzieć się więcej ",
+ "specificSigninRiskLevelsOption": "Wybierz konkretne poziomy ryzyka logowania",
+ "specificUsersExcluded": "określeni użytkownicy wyłączeni",
+ "specificUsersIncluded": "Określeni użytkownicy uwzględnieni",
+ "specificUsersIncludedAndExcluded": "Określeni użytkownicy wykluczeni i włączeni",
+ "startDatePickerLabel": "Początek",
+ "startFreeTrial": "Zacznij korzystać z bezpłatnej wersji próbnej",
+ "startTimePickerLabel": "Godzina rozpoczęcia",
+ "sunday": "Niedziela",
+ "testButton": "What If",
+ "thumbprintCol": "Odcisk palca",
+ "thursday": "Czwartek",
+ "timeConditionAllTimesLabel": "W dowolnym czasie",
+ "timeConditionIntroText": "Konfiguruj czas, dla którego będą stosowane te zasady",
+ "timeConditionSelectorInfoBallonContent": "Kiedy użytkownik się loguje. Przykład: „Środa 9–17 UTC”",
+ "timeConditionSelectorLabel": "Czas (wersja zapoznawcza)",
+ "timeConditionSpecificLabel": "Określone przedziały czasu",
+ "timeSelectorAllTimesText": "W dowolnym czasie",
+ "timeSelectorSpecificTimesText": "Skonfigurowano określone czasy",
+ "timeZoneDropdownInfoBalloonContent": "Wybierz strefę czasową, która definiuje zakres czasu. Te zasady mają zastosowanie do użytkowników we wszystkich strefach czasowych. Na przykład zakres czasu „Środa 7-17” określony dla jednego użytkownika będzie oznaczać „Środa 10-18” dla użytkownika w innej strefie czasowej.",
+ "timeZoneDropdownLabel": "Strefa czasowa",
+ "timeZoneDropdownPlaceholderText": "Wybierz strefę czasową",
+ "tooManyPoliciesDescription": "Wyświetlanych jest teraz tylko 50 pierwszych zasad. Kliknij tutaj, aby wyświetlić wszystkie zasady",
+ "tooManyPoliciesTitle": "Znaleziono więcej niż 50 zasad",
+ "trustedLocationStatusIconDescription": "Lokalizacja jest zaufana",
+ "trustedLocationStatusIconEnabled": "Ikona stanu zaufania",
+ "tuesday": "Wtorek",
+ "uploadInBadState": "Nie można przekazać określonego pliku.",
+ "upsellAppsDescription": "Wymagaj uwierzytelniania wieloskładnikowego w przypadku poufnych aplikacji przez cały czas lub tylko w przypadku dostępu spoza sieci firmowej.",
+ "upsellAppsTitle": "Zabezpiecz aplikacje",
+ "upsellBannerText": "Uzyskaj bezpłatną wersję próbną usługi — wersja Premium, aby korzystać z tej funkcji",
+ "upsellDataDescription": "Wymagaj, aby urządzenie było oznaczone jako zgodne lub dołączone hybrydowo do usługi Microsoft Entra, aby zezwolić na dostęp do zasobów firmy.",
+ "upsellDataTitle": "Zabezpiecz dane",
+ "upsellDescription": "Dostęp warunkowy zapewnia kontrolę i ochronę, dzięki którym dane korporacyjne są bezpieczne, a pracownicy mogą korzystać ze środowiska umożliwiającego najlepsze wykonywanie pracy z dowolnego urządzenia. Przykładowo możesz ograniczyć dostęp spoza sieci firmowej lub ograniczyć dostęp do urządzeń, które spełniają zasady zgodności.",
+ "upsellRiskDescription": "Wymagaj uwierzytelniania wieloskładnikowego w przypadku zdarzeń o podwyższonym ryzyku wykrytych przez system uczenia maszynowego firmy Microsoft.",
+ "upsellRiskTitle": "Chroń przed ryzykiem",
+ "upsellTitle": "Dostęp warunkowy",
+ "upsellWhyTitle": "Dlaczego warto używać dostępu warunkowego?",
+ "userAppNoneOption": "Brak",
+ "userNamePlaceholderText": "Podaj nazwę użytkownika",
+ "userNotSetSeletorLabel": "Nie wybrano żadnego użytkownika ani grupy",
+ "userOnlySelectionBladeExcludeDescription": "Wybierz użytkowników, wobec których zostanie zastosowane wykluczenie z zasad",
+ "userOrGroupSelectionCountDiffBannerText": "Z katalogu usunięto elementy ({0}) skonfigurowane w ramach tych zasad, ale nie ma to wpływu na innych użytkowników i inne grupy. Przy następnej aktualizacji nastąpi usunięcie usuniętych użytkowników i usuniętych grup.",
+ "userOrSPNotSetSelectorLabel": "Wybrano 0 tożsamości użytkowników lub obciążeń",
+ "userOrSPSelectionBladeTitle": "Tożsamości użytkowników lub obciążeń",
+ "userOrSPSelectorInfoBallonText": "Tożsamości w katalogu, do których stosują się te zasady, w tym użytkownicy, grupy i jednostki usług",
+ "userRequired": "Wymagane przez użytkownika",
+ "userRiskErrorBox": "Warunek „Ryzyko związane z użytkownikiem” musi być wybrany, jeśli wybrano udzielenie „Wymagaj zmiany hasła”",
+ "userRiskReauth": "Warunek „Ryzyko związane z użytkownikiem”, a nie „Ryzyko logowania”, musi być wybrany, gdy jest wybrane udzielenie uprawnienia „Wymagaj zmiany hasła” i kontrola sesji „Częstotliwość logowania za każdym razem”",
+ "userSPRequired": "Wymagany użytkownik lub jednostka usługi",
+ "userSPSelectorTitle": "Tożsamość użytkownika lub obciążenia",
+ "userSelectionBladeAllUsersAndGroups": "Wszyscy użytkownicy i wszystkie grupy",
+ "userSelectionBladeExcludeDescription": "Wybierz użytkowników i grupy, wobec których zostanie zastosowane wykluczenie z zasad",
+ "userSelectionBladeExcludeTabTitle": "Wyklucz",
+ "userSelectionBladeExcludedSelectorTitle": "Wybierz wykluczonych użytkowników i wykluczone grupy",
+ "userSelectionBladeIncludeDescription": "Wybierz użytkowników, dla których będą stosowane te zasady",
+ "userSelectionBladeIncludeTabTitle": "Uwzględnij",
+ "userSelectionBladeIncludedSelectorTitle": "Wybierz",
+ "userSelectionBladeSelectUsers": "Wybierz użytkowników",
+ "userSelectionBladeSelectedUsers": "Wybieranie użytkowników i grup",
+ "userSelectionBladeTitle": "Użytkownicy i grupy",
+ "userSelectorBladeTitle": "Użytkownicy",
+ "userSelectorExcluded": "Wyłączono: {0}",
+ "userSelectorGroupPlural": "Grupy: {0} ",
+ "userSelectorGroupSingular": "1 grupa",
+ "userSelectorIncluded": "Włączono: {0}",
+ "userSelectorInfoBallonText": "Użytkownicy i grupy w katalogu, wobec których zostaną zastosowane zasady. Przykład: „grupa pilotażowa”",
+ "userSelectorSelected": "Wybrano: {0}",
+ "userSelectorTitle": "Użytkownik",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "Użytkownicy: {0}",
+ "userSelectorUserSingular": "1 użytkownik",
+ "userSelectorWithExclusion": "{0} i {1}",
+ "usersGroupsLabel": "Użytkownicy i grupy",
+ "viewApprovedAppsText": "Zobacz listę zatwierdzonych aplikacji klienckich",
+ "viewCompliantAppsText": "Zobacz listę aplikacji klienckich chronionych przez zasady",
+ "viewPolicyInformation": "Wyświetl informacje o zasadach",
+ "vpnBladeTitle": "Łączność sieci VPN",
+ "vpnCertCreateFailedMessage": "Błąd: {0}",
+ "vpnCertCreateFailedTitle": "Nie można utworzyć zasad {0}",
+ "vpnCertCreateInProgressTitle": "Tworzenie zasobu {0}",
+ "vpnCertCreateSuccessMessage": "Pomyślnie utworzono: {0}.",
+ "vpnCertCreateSuccessTitle": "Pomyślnie utworzono: {0}",
+ "vpnCertNoRowsMessage": "Nie znaleziono certyfikatów sieci VPN",
+ "vpnCertUpdateFailedMessage": "Błąd: {0}",
+ "vpnCertUpdateFailedTitle": "Nie można zaktualizować elementu {0}",
+ "vpnCertUpdateInProgressTitle": "Aktualizowanie elementu {0}",
+ "vpnCertUpdateSuccessMessage": "Pomyślnie zaktualizowano: {0}.",
+ "vpnCertUpdateSuccessTitle": "Pomyślnie zaktualizowano element {0}",
+ "vpnFeatureInfo": "Aby uzyskać więcej informacji o łączności sieci VPN i dostępie warunkowym, kliknij tutaj.",
+ "vpnFeatureWarning": "Po utworzeniu certyfikatu sieci VPN w witrynie, usługa Microsoft Entra ID natychmiast rozpocznie korzystanie z niego w celu wystawiania klientowi sieci VPN certyfikatów o krótkim okresie życia. Niezwykle ważne jest natychmiastowe wdrożenie certyfikatu sieci VPN na serwerze sieci VPN, aby uniknąć problemów z weryfikacją poświadczeń klienta sieci VPN.",
+ "vpnMenuText": "Łączność sieci VPN",
+ "vpncertDropdownDefaultOption": "Czas trwania",
+ "vpncertDropdownInfoBalloonContent": "Wybierz czas trwania certyfikatu, który chcesz utworzyć",
+ "vpncertDropdownLabel": "Wybierz czas trwania",
+ "vpncertDropdownOneyearOption": "1 rok",
+ "vpncertDropdownThreeyearOption": "3 lata",
+ "vpncertDropdownTwoyearOption": "2 lata",
+ "wednesday": "Środa",
+ "whatIfCountry": "Kraj/region",
+ "whatIfCountryInfo": "Kraj/region, z której loguje się użytkownik.",
+ "whatIfDevicePlatformInfo": "Platforma urządzeń, z której loguje się użytkownik.",
+ "whatIfEnterIpAddress": "Wprowadź adres IP (np. 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "Określono nieprawidłowy adres IP.",
+ "whatIfIpAddress": "Adres IP",
+ "whatIfIpAddressInfo": "Adres IP, z której loguje się użytkownik.",
+ "whatIfIpCountryInfoBoxText": "W przypadku używania adresu IP lub kraju/regionu oba pola będą wymagane i powinny być poprawnie mapowane na siebie.",
+ "whatIfSelectCountry": "Wybierz kraj/region...",
+ "whatIfSelectDevicePlatform": "Wybierz platformę urządzenia...",
+ "whatIfSelectPrivateLink": "Wybierz łącze prywatne...",
+ "whatIfSelectSignInRisk": "Wybierz ryzyko logowania...",
+ "whatIfSignInRisk": "Ryzyko logowania",
+ "whatIfSignInRiskInfo": "Poziom ryzyka skojarzony z logowaniem",
+ "whatIfUnknownAreas": "Nieznane obszary",
+ "windows365InfoBox": "Wybranie systemu Windows 365 wpłynie na połączenia z hostami sesji komputerów w chmurze oraz usługi Azure Virtual Desktop. Kliknij tutaj, aby dowiedzieć się więcej.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Tożsamości obciążeń (wersja zapoznawcza)",
+ "workloadIdentitiesLicenseText": "Do edytowania tych zasad jest wymagana licencja premium P1 lub P2 tożsamości obciążenia.",
+ "workloadIdentity": "Tożsamość obciążeń"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Przegląd"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Wyszukaj według urządzenia, użytkownika lub wersji aktualizacji dotyczącej jakości."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Nie można załadować profili aktualizacji oprogramowania systemu iOS"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Profil aktualizacji systemu iOS",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profil"
+ },
+ "listLoadError": "Nie można załadować profili aktualizacji oprogramowania systemu iOS; spróbuj ponownie później",
+ "lowercase": "Zasady aktualizacji systemu iOS",
+ "uppercase": "Zasady aktualizacji systemu iOS"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Niestety, nie możemy nawiązać połączenia z firmą Apple w celu pobrania listy dostępnych wersji. Spróbuj ponownie później lub kontynuuj przy użyciu najnowszej wersji.",
+ "latestUpdate": "Najnowsza aktualizacja",
+ "noLongerSupported": "Wybrana wersja nie jest już obsługiwana",
+ "olderVersionSelected": "Ponieważ wybrano starszą wersję, pamiętaj o zastosowaniu zasad ograniczania urządzeń, które opóźnią widoczność aktualizacji oprogramowania, aby urządzenia nie mogły przeprowadzić aktualizacji do najnowszej wersji.",
+ "prefix": "Zainstaluj system iOS/iPadOS",
+ "selectSupported": "Wybierz wersję aktualizacji obsługiwaną przez firmę Apple",
+ "updateToInstall": "Aktualizacja do zainstalowania"
+ },
+ "Schedule": {
+ "always": "Aktualizuj przy następnym meldowaniu",
+ "duringTimeWindows": "Aktualizuj w zaplanowanym czasie",
+ "header": "Domyślnie, gdy zasady aktualizacji są przypisane do urządzenia, usługa Intune wdraża najnowsze aktualizacje po zaewidencjonowaniu urządzenia. Możesz również zamiast tego utworzyć harmonogram tygodniowy z niestandardowymi terminami rozpoczęcia i zakończenia. Jeśli zdecydujesz się zaktualizujesz poza zaplanowanym terminem, usługa Intune nie wdroży aktualizacji do momentu zakończenia zaplanowanego terminu.",
+ "infoBalloon": "Kiedy nastąpi aktualizacja. Aby zaplanować aktualizacje w trakcie zaplanowanych godzin lub poza nimi, wymagane są dodatkowe dane wejściowe.",
+ "label": "Typ harmonogramu",
+ "outsideActiveHours": "Aktualizuj poza godzinami aktywnego użytkowania (starsza wersja)",
+ "outsideTimeWindows": "Aktualizuj poza zaplanowanym czasem",
+ "timeWindow": "Przedział czasu",
+ "timeZone": "Strefa czasowa",
+ "title": "Aktualizuj ustawienia harmonogramu zasad:",
+ "weekly": "Harmonogram tygodniowy",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "Wersja systemu iOS/iPadOS do zainstalowania na urządzeniach w czasie aktualizacji.",
+ "label": "Wybierz wersję do zainstalowania"
+ },
+ "header": "Utwórz profil, aby wymusić automatyczne instalowanie najnowszych aktualizacji systemu iOS/iPadOS przez przypisane urządzenia. Te ustawienia określają sposób i czas wdrażania aktualizacji oprogramowania. Ten profil nie uniemożliwia użytkownikom ręcznego aktualizowania systemu operacyjnego, czemu można zapobiegać przez nawet 90 dni, używając zasad ograniczania konfiguracji urządzenia. Aktualizacje będą stosowane tylko na urządzeniach nadzorowanych.",
+ "notAvailable": "Brak"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Brak zasad aktualizacji systemu iOS do wyświetlenia",
+ "macOsUpdates": "Brak zasad aktualizacji oprogramowania macOS do wyświetlenia",
+ "windowsUpdates": "Brak pierścieni aktualizacji dla systemu Windows 10 i nowszego do wyświetlenia."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Nazwa urządzenia",
+ "deviceUpdateStatus": "Stan aktualizacji urządzenia",
+ "lastUpdated": "Ostatnia aktualizacja",
+ "osVersion": "Wersja systemu operacyjnego",
+ "userPrincipalName": "Nazwa użytkownika"
+ },
+ "maximumOSVersionFilter": "Maksymalna wersja systemu operacyjnego",
+ "minimumOSVersionFilter": "Minimalna wersja systemu operacyjnego",
+ "noData": "Brak danych do wyświetlenia",
+ "searchBoxPlaceholder": "Wyszukaj według nazwy urządzenia, nazwy użytkownika lub wersji systemu operacyjnego",
+ "title": "Podsumowanie kont dla urządzeń z systemem macOS"
+ },
+ "Category": {
+ "configurationDataFile": "Plik danych konfiguracji",
+ "critical": "Krytyczne",
+ "firmware": "Oprogramowanie układowe",
+ "other": "Inne"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Ostatnia aktualizacja",
+ "successfulUpdateCount": "Aktualizacje pomyślne zostały wdrożone",
+ "totalUpdateCount": "Łączna liczba wdrożonych aktualizacji",
+ "updateCategory": "Kategoria aktualizacji",
+ "updateCategoryStatus": "Stan kategorii aktualizacji"
+ },
+ "noData": "Brak danych do wyświetlenia"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Nie można załadować profili aktualizacji oprogramowania systemu macOS"
+ }
+ },
+ "State": {
+ "available": "Dostępne",
+ "commandFailed": "Wykonanie polecenia nie powiodło się",
+ "downloadFailed": "Pobieranie nie powiodło się",
+ "downloadInsufficientNetwork": "Sieć niewystarczająca dla pobierania",
+ "downloadInsufficientPower": "Poziom energii za niski dla pobierania",
+ "downloadInsufficientSpace": "Ilość miejsca niewystarczająca dla pobierania",
+ "downloaded": "Pobrano",
+ "downloading": "Pobieranie",
+ "idle": "Bezczynny",
+ "installFailed": "Instalacja nie powiodła się",
+ "installInsufficientPower": "Poziom energii niewystarczający dla instalacji",
+ "installInsufficientSpace": "Ilość miejsca niewystarczająca dla instalacji",
+ "installing": "Instalowanie",
+ "scheduled": "Zaplanowane",
+ "success": "Powodzenie",
+ "unknown": "Nieznany"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Ostatnia aktualizacja",
+ "updateName": "Nazwa aktualizacji",
+ "updateStatus": "Stan aktualizacji",
+ "version": "Wersja"
+ },
+ "noData": "Brak danych do wyświetlenia",
+ "searchBoxPlaceholder": "Wyszukaj według wersji lub nazwy aktualizacji"
+ },
+ "SummaryBlade": {
+ "subtitle": "Profil aktualizacji systemu macOS",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profil"
+ },
+ "error": "Błąd",
+ "errorOrErrors": "Błędy",
+ "errors": "Błędy",
+ "listLoadError": "Nie można załadować profili aktualizacji oprogramowania systemu macOS; spróbuj ponownie później",
+ "lowercase": "Zasady aktualizacji systemu macOS",
+ "other": "Inne",
+ "subtitle": "Aktualizacja oprogramowania systemu MacOS",
+ "upToDate": "Aktualne",
+ "uppercase": "Zasady aktualizacji systemu macOS"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Spróbuj ponownie później",
+ "title": "Nie można usunąć pliku {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Spróbuj ponownie później"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Spróbuj ponownie później",
+ "title": "Nie można załadować elementu {0}"
+ },
+ "idWrongFormat": "Podany identyfikator profilu nie ma oczekiwanego formatu."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "Należy wybrać co najmniej jedno okno czasu",
+ "tooMany": "Można skonfigurować maksymalnie 20 okien czasu"
+ }
+ },
+ "endDay": "Dzień zakończenia",
+ "endTime": "Godzina zakończenia",
+ "startDay": "Dzień rozpoczęcia",
+ "startTime": "Godzina rozpoczęcia",
+ "timeWindowError": "Wybierz przedział czasu obejmujący co najmniej jedną godzinę."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Nie można załadować profilów pierścienia aktualizacji dla systemu Windows 10 lub nowszego."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Pierścień aktualizacji dla systemu Windows 10 i nowszego",
+ "title": "Windows Update dla Firm"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 i nowsze",
+ "title": "Pierścień aktualizacji dla systemu Windows 10 i nowszego"
+ },
+ "listLoadError": "Nie można załadować profili pierścieni aktualizacji dla systemu Windows 10 i nowszego. Spróbuj ponownie później",
+ "lowercase": "Pierścień aktualizacji",
+ "uppercase": "Pierścień aktualizacji"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Aktualizuj ustawienia zasad",
+ "updateRingSettings": "Aktualizuj ustawienia pierścienia"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Utwórz element {0}",
+ "edit": "Edytuj element {0}"
+ }
+ },
+ "notScannedYet": "Jeszcze nie skanowano",
+ "outOfDateIosDevices": "Nieaktualne urządzenia z systemem iOS"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge w wersji 77 lub nowszej",
+ "storeApp": "Aplikacja ze Sklepu",
+ "office365Suite": "Aplikacje platformy Microsoft 365",
+ "microsoftDefenderATP": "Microsoft Defender dla punktu końcowego",
+ "other": "Inne",
+ "webApplication": "Aplikacja internetowa"
+ },
+ "Filters": {
+ "ruleSyntax": "Składnia reguł",
+ "filters": "Filtry"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Wybierz skrypt odnajdywania",
+ "scriptFileLabel": "Wybierz swój skrypt odnajdywania"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Jeśli ta opcja jest włączona, urządzenia muszą być zgodne zgodnie z regułami niestandardowymi zdefiniowanymi w pliku JSON na podstawie danych niestandardowych zwróconych przez skrypt odnajdywania programu PowerShell.",
+ "label": "Zgodność niestandardowa jest obecnie oferowana w wersji zapoznawczej. Gdy stanie się ogólnie dostępna, będzie można dodać ją za dodatkową opłatą do opcji licencjonowania obejmujących usługę Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Skrypt",
+ "placeholder": "Kliknij, aby wybrać",
+ "searchboxPlaceholder": "Wyszukaj według nazwy skryptu",
+ "title": "Wybierz skrypt odnajdywania"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Podsumowanie reguł zgodności niestandardowej"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Przekaż i zweryfikuj plik JSON przy użyciu niestandardowych ustawień zgodności",
+ "noFileSelectedError": "Wybierz plik json",
+ "parseFileSelectedError": "Plik json jest nieprawidłowy"
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Skonfiguruj wymagania dotyczące kodu PIN i poświadczeń, które użytkownicy muszą spełnić, aby uzyskać dostęp do aplikacji w kontekście roboczym."
+ },
+ "DataProtection": {
+ "infoText": "Ta grupa obejmuje kontrole ochrony przed utratą danych, takie jak ograniczenia wycinania, kopiowania, wklejania i zapisywania jako. Te ustawienia określają sposób interakcji użytkowników z danymi w aplikacjach."
+ },
+ "DeviceTypes": {
+ "selectOne": "Wybierz przynajmniej jeden typ urządzenia."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Jako docelowe ustaw aplikacje na wszystkich typach urządzeń"
+ },
+ "infoText": "Wybierz, w jaki sposób chcesz zastosować te zasady do aplikacji na różnych urządzeniach. Następnie dodaj co najmniej jedną aplikację.",
+ "selectOne": "Wybierz co najmniej jedną aplikację, aby utworzyć zasady."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender dla punktu końcowego",
+ "androidDeviceOwnerApplications": "Aplikacje",
+ "androidDeviceOwnerPolicyMessages": "Niestandardowe informacje o pomocy technicznej",
+ "androidForWorkPassword": "Hasło urządzenia",
+ "appManagement": "Zezwalaj na aplikacje lub blokuj je",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Aplikacje z ograniczeniami",
+ "applicationVisibility": "Pokaż lub ukryj aplikacje",
+ "applications": "App Store",
+ "applicationsAndGames": "Sklep App Store, wyświetlanie dokumentów, granie",
+ "applicationsAndGoogle": "Sklep Google Play",
+ "appsAndExperience": "Aplikacje i środowisko",
+ "associatedDomains": "Skojarzone domeny",
+ "autonomousSingleAppMode": "Autonomiczny tryb pojedynczej aplikacji",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Szyfrowanie systemu Windows",
+ "bootOptions": "Opcje rozruchu",
+ "browser": "Przeglądarka",
+ "builtinApps": "Aplikacje wbudowane",
+ "cameras": "Kamery",
+ "cellular": "Sieć komórkowa",
+ "cloudAndStorage": "Chmura i magazyn",
+ "cloudPrint": "Drukarka w chmurze",
+ "complianceEmailProfile": "Wiadomość e-mail",
+ "connectedDevices": "Podłączone urządzenia",
+ "connectivity": "Sieć komórkowa i łączność",
+ "contentCaching": "Buforowanie zawartości",
+ "controlPanelAndSettings": "Panel sterowania i Ustawienia",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Zgodność niestandardowa",
+ "customConfiguration": "Niestandardowy profil konfiguracji",
+ "customOMASettings": "Niestandardowe ustawienia OMA-URI",
+ "customPreferences": "Plik preferencji",
+ "dFCISecuritySettings": "Ustawienia zabezpieczeń",
+ "defender": "Program antywirusowy Microsoft Defender",
+ "defenderAntivirus": "Program antywirusowy Microsoft Defender",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Zapora systemu Windows",
+ "defenderLocalSecurityOptions": "Opcje zabezpieczeń urządzenia lokalnego",
+ "defenderSecurityCenter": "Centrum zabezpieczeń usługi Microsoft Defender",
+ "deliveryOptimization": "Optymalizacja dostarczania",
+ "derivedCredentialAuthenticationConfiguration": "Pochodne poświadczenia",
+ "deviceExperience": "Środowisko urządzenia",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Kontrola aplikacji usługi Microsoft Defender",
+ "deviceHealth": "Kondycja urządzenia",
+ "devicePassword": "Hasło urządzenia",
+ "deviceProperties": "Właściwości urządzenia",
+ "deviceRestrictions": "Ogólne",
+ "deviceSecurity": "Zabezpieczenia systemu",
+ "display": "Wyświetl",
+ "domainJoin": "Przyłączanie do domeny",
+ "domains": "Domeny",
+ "edgeBrowser": "Starsze wersje przeglądarki Microsoft Edge (wersja 45 i wcześniejsze)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Tryb kiosku przeglądarki Microsoft Edge",
+ "editionUpgrade": "Uaktualnianie wersji",
+ "education": "Edukacja",
+ "educationDeviceCerts": "Certyfikaty urządzeń",
+ "educationStudentCerts": "Certyfikaty uczniów",
+ "educationTakeATest": "Wypełnij test",
+ "educationTeacherCerts": "Certyfikaty nauczycieli",
+ "emailProfile": "Wiadomość e-mail",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Rozszerzenie aplikacji do logowania jednokrotnego",
+ "filevault": "FileVault",
+ "firewall": "Zapora",
+ "games": "Gry",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Monitorowanie kondycji",
+ "homeScreenLayout": "Układ ekranu startowego",
+ "iOSWallpaper": "Tapeta",
+ "importedPFX": "Zaimportowany certyfikat PKCS",
+ "iosDefenderAtp": "Microsoft Defender dla punktu końcowego",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Rozszerzenia jądra",
+ "keyboardAndDictionary": "Klawiatura i słownik",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Dedykowane urządzenia",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Przeglądarka internetowa kiosku",
+ "lockScreenMessage": "Komunikat na ekranie blokady",
+ "lockedScreenExperience": "Środowisko ekranu blokady",
+ "logging": "Raportowanie i telemetria",
+ "loginItems": "Elementy logowania",
+ "loginWindow": "Okno logowania",
+ "macDefenderAtp": "Microsoft Defender dla punktu końcowego",
+ "maintenance": "Konserwacja",
+ "malware": "Złośliwe oprogramowanie",
+ "messaging": "Obsługa komunikatów",
+ "microphonesAndSpeakers": "Mikrofon i głośniki",
+ "networkBoundary": "Granica sieci",
+ "networkProxy": "Serwer proxy sieci",
+ "notifications": "Powiadomienia aplikacji",
+ "pKCS": "Certyfikat PKCS",
+ "password": "Hasło",
+ "personalProfile": "Profil osobisty",
+ "personalization": "Personalizacja",
+ "policyOverride": "Przesłoń zasady grupy",
+ "ports": "Porty",
+ "powerSettings": "Ustawienia zasilania",
+ "printer": "Drukarka",
+ "privacy": "Prywatność",
+ "privacyPerApp": "Wyjątki prywatności dla aplikacji",
+ "privacyPreferences": "Preferencje dotyczące prywatności",
+ "projection": "Projekcja",
+ "radios": "Radia",
+ "sCCMCompliance": "Zgodność z programem Configuration Manager",
+ "sCEP": "Certyfikat SCEP",
+ "sCEPProperties": "Certyfikat SCEP",
+ "sMode": "Przełączenie trybu (tylko niejawny program testów systemu Windows)",
+ "safari": "Safari",
+ "search": "Wyszukaj",
+ "session": "Sesja",
+ "sharedDevice": "Udostępnione urządzenie iPad",
+ "sharedPCAccountManager": "Udostępnione urządzenie obsługujące wielu użytkowników",
+ "singleSignOn": "Logowanie jednokrotne",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Ustawienia",
+ "start": "Rozpoczęcie",
+ "systemExtensions": "Rozszerzenia systemu",
+ "systemSecurity": "Zabezpieczenia systemu",
+ "trustedCert": "Certyfikat zaufany",
+ "uEFIAccess": "Dostęp do interfejsu UEFI",
+ "updates": "Aktualizacje",
+ "userRights": "Prawa użytkownika",
+ "usersAndAccounts": "Użytkownicy i konta",
+ "vPN": "Podstawowa sieć VPN",
+ "vPNApps": "Automatyczne połączenie VPN",
+ "vPNAppsAndTrafficRules": "Reguły dotyczące aplikacji i ruchu",
+ "vPNConditionalAccess": "Dostęp warunkowy",
+ "vPNConnectivity": "Łączność",
+ "vPNDNSTriggers": "Ustawienia DNS",
+ "vPNIKEv2": "Ustawienia IKEv2",
+ "vPNProxy": "Serwer proxy",
+ "vPNSplitTunneling": "Tunelowanie podzielone",
+ "vPNTrustedNetwork": "Wykrywanie zaufanych sieci",
+ "wakeSettings": "Ustawienia wznawiania",
+ "webContentFilter": "Filtr zawartości internetowej",
+ "wiFi": "Sieć Wi-Fi",
+ "win10Wifi": "Sieć Wi-Fi",
+ "windowsAtp": "Microsoft Defender dla punktu końcowego",
+ "windowsDefenderATP": "Microsoft Defender dla punktu końcowego",
+ "windowsHelloForBusiness": "Windows Hello dla firm",
+ "windowsSpotlight": "W centrum uwagi Windows",
+ "wiredNetwork": "Sieć przewodowa",
+ "wireless": "Bezprzewodowe",
+ "wirelessProjection": "Projekcja bezprzewodowa",
+ "workProfile": "Ustawienia profilu służbowego",
+ "workProfilePassword": "Hasło profilu służbowego",
+ "xboxServices": "Usługi Xbox",
+ "zebraMx": "Profil MX (tylko Zebra)",
+ "complianceActionsLabel": "Akcje w przypadku niezgodności"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Dozwolone adresy URL",
+ "tooltip": "Określ witryny, do których użytkownicy mogą uzyskiwać dostęp, gdy są w kontekście roboczym. Żadne inne witryny nie będą dozwolone. Możesz zdecydować się skonfigurować listę dozwolonych witryn albo listę zablokowanych witryn, ale nie możesz skonfigurować ich obu jednocześnie. "
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Serwer proxy aplikacji",
+ "title": "Przekierowanie serwera proxy aplikacji",
+ "tooltip": "Włącz przekierowanie serwera proxy aplikacji, aby zapewnić użytkownikom dostęp do linków firmowych i lokalnych aplikacji internetowych."
+ },
+ "BlockedURLs": {
+ "title": "Zablokowane adresy URL",
+ "tooltip": "Określ witryny, które są blokowane dla użytkowników, gdy są w kontekście roboczym. Wszystkie inne witryny będą dozwolone. Możesz zdecydować się skonfigurować listę dozwolonych witryn albo listę zablokowanych witryn, ale nie możesz skonfigurować ich obu jednocześnie. "
+ },
+ "Bookmarks": {
+ "header": "Zarządzane zakładki",
+ "tooltip": "Wprowadź dla użytkowników listę adresów URL z zakładkami, które będą dostępne podczas korzystania z przeglądarki Microsoft Edge w kontekście roboczym.",
+ "uRL": "Adres URL"
+ },
+ "HomepageURL": {
+ "header": "Zarządzana strona główna",
+ "title": "Adres URL skrótu do strony głównej",
+ "tooltip": "Skonfiguruj skrót do strony głównej, który będzie widoczny dla użytkowników jako pierwsza ikona poniżej paska wyszukiwania, gdy otworzą nową kartę w przeglądarce Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Przekieruj witryny z ograniczeniami do kontekstu osobistego",
+ "tooltip": "Skonfiguruj, czy użytkownicy powinni mieć możliwość przechodzenia do swojego osobistego kontekstu, aby otwierać witryny z ograniczeniami."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Jednostka SKU systemu Windows Home",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Wybierz liczbę bitów zawartych w kluczu.",
- "keyUsage": "Określ akcję kryptograficzną, która jest wymagana w celu wymiany klucza publicznego certyfikatu.",
- "renewalThreshold": "Wprowadź procent (od 1 do 99) dozwolonego pozostałego okresu istnienia certyfikatu, zanim urządzenie będzie mogło żądać jego odnowienia. Wartość zalecana w usłudze Intune to 20%. (1–99)",
- "rootCert": "Wybierz wcześniej skonfigurowany i przypisany profil certyfikatu głównego urzędu certyfikacji. Certyfikat urzędu certyfikacji musi być zgodny z certyfikatem głównym urzędu certyfikacji, który wystawia certyfikat dla tego profilu (ten, który jest obecnie konfigurowany).",
- "scepServerUrl": "Wprowadź adres URL serwera usługi NDES, który wystawia certyfikaty za pośrednictwem protokołu SCEP (musi to być adres HTTPS). Przykład: https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Dodaj co najmniej jeden adres URL serwera usługi NDES, który wystawia certyfikaty za pośrednictwem protokołu SCEP (musi to być adres HTTPS). Przykład: https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Alternatywna nazwa obiektu",
- "subjectNameFormat": "Format nazwy obiektu",
- "validityPeriod": "Czas pozostały do wygaśnięcia certyfikatu. Wprowadź wartość, która jest mniejsza niż lub równa okresowi ważności wyświetlanemu w szablonie certyfikatu. Wartość domyślna to jeden rok."
- },
- "appInstallContext": "Określa kontekst instalacji do skojarzenia z tą aplikacją. W przypadku aplikacji z dwoma trybami wybierz żądany kontekst aplikacji. W przypadku wszystkich innych aplikacji ta opcja jest wstępnie wybrana na podstawie pakietu i nie można jej zmodyfikować.",
- "autoUpdateMode": "Skonfiguruj priorytet aktualizacji dla tej aplikacji. Wybierz ustawienie Domyślnie, aby wymagać łączenie urządzenia z siecią Wi-Fi, jego zasilanie i ograniczenie w użytkowaniu przed aktualizacją aplikacji. Wybierz ustawienie Wysoki priorytet, aby zaktualizować aplikację, gdy tylko deweloper opublikuje aplikację, niezależnie od stanu naładowania, możliwości sieci Wi-Fi lub aktywności użytkownika końcowego na urządzeniu. Wybierz ustawienie Odroczono, aby zrezygnować z aktualizacji aplikacji na maksymalnie 90 dni. Ustawienia Wysoki priorytet i Odroczono będą obowiązywać tylko na urządzeniach DO.",
- "configurationSettingsFormat": "Tekst formatu ustawień konfiguracji",
- "ignoreVersionDetection": "Ustaw tę opcję na wartość „Tak” dla aplikacji automatycznie aktualizowanych przez dewelopera aplikacji (np. Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Wybierz pozycję „Tak” w przypadku aplikacji, które są automatycznie aktualizowane przez dewelopera, lub aby przed instalacją sprawdzić tylko identyfikator bundleID aplikacji. Wybierz pozycję „Nie”, aby przed instalacją sprawdzić numer wersji i identyfikator bundleID aplikacji.",
- "installAsManagedMacOSLobApp": "To ustawienie dotyczy tylko systemu macOS 11 i nowszych. Aplikacja zostanie zainstalowana w systemie macOS 10.15 lub starszym, ale nie będzie zarządzana.",
- "installContextDropdown": "Wybierz odpowiedni kontekst instalacji. W przypadku kontekstu użytkownika aplikacja zostanie zainstalowana tylko dla użytkownika docelowego, a w przypadku kontekstu urządzenia — dla wszystkich użytkowników na urządzeniu.",
- "ldapUrl": "To jest nazwa hosta LDAP, z którego klienci mogą uzyskać publiczne klucze szyfrowania dla adresatów poczty e-mail. Wiadomości e-mail będą szyfrowane, gdy klucz jest dostępny. Obsługiwane formaty:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Wybierz uprawnienia w środowisku uruchomieniowym dla skojarzonej aplikacji.",
- "policyAssociatedApp": "Wybierz aplikację, z którą będą skojarzone te zasady.",
- "policyConfigurationSettings": "Wybierz metodę, z pomocą której chcesz zdefiniować ustawienia konfiguracji tych zasad.",
- "policyDescription": "Opcjonalnie możesz podać opis tych zasad konfiguracji.",
- "policyEnrollmentType": "Wybierz, czy te ustawienia są zarządzane za pośrednictwem zarządzania urządzeniami, czy aplikacji utworzonych przy użyciu zestawu SDK usługi Intune.",
- "policyName": "Wprowadź nazwę tych zasad konfiguracji.",
- "policyPlatform": "Wybierz platformę, do której zostaną zastosowane te zasady konfiguracji aplikacji.",
- "policyProfileType": "Wybierz typy profilów urządzeń, do których będzie stosowany ten profil konfiguracji aplikacji",
- "policySMime": "Skonfiguruj ustawienia podpisywania i szyfrowania S/MIME dla programu Outlook.",
- "sMimeDeployCertsFromIntune": "Określ, czy certyfikaty S/MIME mają być dostarczane z usługi Intune w celu użycia w programie Outlook.\r\nUsługa Intune może automatycznie wdrażać dla użytkowników certyfikaty podpisywania i szyfrowania za pośrednictwem Portalu firmy.",
- "sMimeEnable": "Określ, czy kontrolki S/MIME są włączone podczas tworzenia wiadomości e-mail",
- "sMimeEnableAllowChange": "Określ, czy użytkownik może zmieniać ustawienie Włącz protokół S/MIME.",
- "sMimeEncryptAllEmails": "Określ, czy wszystkie wiadomości e-mail muszą być szyfrowane.\r\nSzyfrowanie konwertuje dane na zaszyfrowany tekst, dzięki czemu może je odczytać tylko adresat.",
- "sMimeEncryptAllEmailsAllowChange": "Określ, czy użytkownik może zmieniać ustawienie Szyfruj wszystkie wiadomości e-mail.",
- "sMimeEncryptionCertProfile": "Określ profil certyfikatu na potrzeby szyfrowania wiadomości e-mail.",
- "sMimeSignAllEmails": "Określ, czy wszystkie wiadomości e-mail muszą być podpisywane.\r\nPodpis cyfrowy weryfikuje autentyczność wiadomości e-mail i zapewnia, że zawartość nie została zmodyfikowana podczas przesyłania.",
- "sMimeSignAllEmailsAllowChange": "Określ, czy użytkownik może zmieniać ustawienie Podpisuj wszystkie wiadomości e-mail.",
- "sMimeSigningCertProfile": "Określ profil certyfikatu na potrzeby podpisywania wiadomości e-mail.",
- "sMimeUserNotificationType": "Metoda powiadamiania użytkowników o konieczności otworzenia Portalu firmy w celu pobrania certyfikatów S/MIME na potrzeby programu Outlook."
- },
+ "Languages": {
+ "ar-aE": "Arabski (Zjednoczone Emiraty Arabskie)",
+ "ar-bH": "Arabski (Bahrajn)",
+ "ar-dZ": "Arabski (Algieria)",
+ "ar-eG": "Arabski (Egipt)",
+ "ar-iQ": "Arabski (Irak)",
+ "ar-jO": "Arabski (Jordania)",
+ "ar-kW": "Arabski (Kuwejt)",
+ "ar-lB": "Arabski (Liban)",
+ "ar-lY": "Arabski (Libia)",
+ "ar-mA": "Arabski (Maroko)",
+ "ar-oM": "Arabski (Oman)",
+ "ar-qA": "Arabski (Katar)",
+ "ar-sA": "Arabski (Arabia Saudyjska)",
+ "ar-sY": "Arabski (Syria)",
+ "ar-tN": "Arabski (Tunezja)",
+ "ar-yE": "Arabski (Jemen)",
+ "az-cyrl": "Azerbejdżański (cyrylica, Azerbejdżan)",
+ "az-latn": "Azerbejdżański (łaciński, Azerbejdżan)",
+ "bn-bD": "Bengalski (Bangladesz)",
+ "bn-iN": "Bengalski (Indie)",
+ "bs-cyrl": "Bośniacki (cyrylica)",
+ "bs-latn": "Bośniacki (łaciński)",
+ "zh-cN": "Chiński (ChRL)",
+ "zh-hK": "Chiński (SRA Hongkong)",
+ "zh-mO": "Chiński (Macao S.A.R.)",
+ "zh-sG": "Chiński (Singapur)",
+ "zh-tW": "Chiński (Tajwan)",
+ "hr-bA": "Chorwacki (łaciński)",
+ "hr-hR": "Chorwacki (Chorwacja)",
+ "nl-bE": "Holenderski (Belgia)",
+ "nl-nL": "Holenderski (Holandia)",
+ "en-aU": "Angielski (Australia)",
+ "en-bZ": "Angielski (Belize)",
+ "en-cA": "Angielski (Kanada)",
+ "en-cabn": "Angielski (Karaiby)",
+ "en-iE": "Angielski (Irlandia)",
+ "en-iN": "Angielski (Indie)",
+ "en-jM": "Angielski (Jamajka)",
+ "en-mY": "Angielski (Malezja)",
+ "en-nZ": "Angielski (Nowa Zelandia)",
+ "en-pH": "Angielski (Republika Filipin)",
+ "en-sG": "Angielski (Singapur)",
+ "en-tT": "Angielski (Trynidad i Tobago)",
+ "en-uK": "Angielski (Zjednoczone Królestwo)",
+ "en-uS": "Angielski (Stany Zjednoczone)",
+ "en-zA": "Angielski (Republika Południowej Afryki)",
+ "en-zW": "Angielski (Zimbabwe)",
+ "fr-bE": "Francuski (Belgia)",
+ "fr-cA": "Francuski (Kanada)",
+ "fr-cH": "Francuski (Szwajcaria)",
+ "fr-fR": "Francuski (Francja)",
+ "fr-lU": "Francuski (Luksemburg)",
+ "fr-mC": "Francuski (Monako)",
+ "de-aT": "Niemiecki (Austria)",
+ "de-cH": "Niemiecki (Szwajcaria)",
+ "de-dE": "Niemiecki (Niemcy)",
+ "de-lI": "Niemiecki (Liechtenstein)",
+ "de-lU": "Niemiecki (Luksemburg)",
+ "iu-cans": "Inuktitut (sylabiczny, Kanada)",
+ "iu-latn": "Inuktitut (łaciński, Kanada)",
+ "it-cH": "Włoski (Szwajcaria)",
+ "it-iT": "Włoski (Włochy)",
+ "ms-bN": "Malajski (Brunei Darussalam)",
+ "ms-mY": "Malajski (Malezja)",
+ "mn-cN": "Mongolski (mongolski tradycyjny, ChRL)",
+ "mn-mN": "Mongolski (cyrylica, Mongolia)",
+ "no-nB": "Norweski, Bokmål (Norwegia)",
+ "no-nn": "Norweski, Nynorsk (Norwegia)",
+ "pt-bR": "Portugalski (Brazylia)",
+ "pt-pT": "Portugalski (Portugalia)",
+ "quz-bO": "Keczua (Boliwia)",
+ "quz-eC": "Keczua (Ekwador)",
+ "quz-pE": "Keczua (Peru)",
+ "smj-nO": "Lapoński, Lule (Norwegia)",
+ "smj-sE": "Lapoński, Lule (Szwecja)",
+ "se-fI": "Lapoński, północny (Finlandia)",
+ "se-nO": "Lapoński, północny (Norwegia)",
+ "se-sE": "Lapoński, północny (Szwecja)",
+ "sma-nO": "Lapoński, południowy (Norwegia)",
+ "sma-sE": "Lapoński, południowy (Szwecja)",
+ "smn": "Lapoński, Inari (Finlandia)",
+ "sms": "Lapoński, Skolt (Finlandia)",
+ "sr-Cyrl-bA": "Serbski (cyrylica)",
+ "sr-Cyrl-rS": "Serbski (cyrylica, Serbia i Czarnogóra [dawniej])",
+ "sr-Latn-bA": "Serbski (łaciński)",
+ "sr-Latn-rS": "Serbski (łaciński, Serbia)",
+ "dsb": "Dolnołużycki (Niemcy)",
+ "hsb": "Górnołużycki (Niemcy)",
+ "es-es-tradnl": "Hiszpański (Hiszpania, sortowanie tradycyjne)",
+ "es-aR": "Hiszpański (Argentyna)",
+ "es-bO": "Hiszpański (Boliwia)",
+ "es-cL": "Hiszpański (Chile)",
+ "es-cO": "Hiszpański (Kolumbia)",
+ "es-cR": "Hiszpański (Kostaryka)",
+ "es-dO": "Hiszpański (Dominikana)",
+ "es-eC": "Hiszpański (Ekwador)",
+ "es-eS": "Hiszpański (Hiszpania)",
+ "es-gT": "Hiszpański (Gwatemala)",
+ "es-hN": "Hiszpański (Honduras)",
+ "es-mX": "Hiszpański (Meksyk)",
+ "es-nI": "Hiszpański (Nikaragua)",
+ "es-pA": "Hiszpański (Panama)",
+ "es-pE": "Hiszpański (Peru)",
+ "es-pR": "Hiszpański (Portoryko)",
+ "es-pY": "Hiszpański (Paragwaj)",
+ "es-sV": "Hiszpański (Salwador)",
+ "es-uS": "Hiszpański (Stany Zjednoczone)",
+ "es-uY": "Hiszpański (Urugwaj)",
+ "es-vE": "Hiszpański (Wenezuela)",
+ "sv-fI": "Szwedzki (Finlandia)",
+ "uz-cyrl": "Uzbecki (cyrylica, Uzbekistan)",
+ "uz-latn": "Uzbecki (łaciński, Uzbekistan)",
+ "af": "Afrykanerski (Republika Południowej Afryki)",
+ "sq": "Albański (Albania)",
+ "am": "Amharyjski (Etiopia)",
+ "hy": "Armeński (Armenia)",
+ "as": "Assamski (Indie)",
+ "ba": "Baszkirski (Rosja)",
+ "eu": "Baskijski (Baskijski)",
+ "be": "Białoruski (Białoruś)",
+ "br": "Bretoński (Francja)",
+ "bg": "Bułgarski (Bułgaria)",
+ "ca": "Kataloński (Kataloński)",
+ "co": "Korsykański (Francja)",
+ "cs": "Czeski (Czechy)",
+ "da": "Duński (Dania)",
+ "dv": "Divehi (Malediwy)",
+ "et": "Estoński (Estonia)",
+ "fo": "Farerski (Wyspy Owcze)",
+ "fil": "Filipino (Filipiny)",
+ "fi": "Fiński (Finlandia)",
+ "gl": "Galicyjski (Galicia)",
+ "ka": "Gruziński (Gruzja)",
+ "el": "Grecki (Grecja)",
+ "gu": "Gudżarati (Indie)",
+ "ha": "Hausa (łaciński, Nigeria)",
+ "he": "Hebrajski (Izrael)",
+ "hi": "Hindi (Indie)",
+ "hu": "Węgierski (Węgry)",
+ "is": "Islandzki (Islandia)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonezyjski (Indonezja)",
+ "ga": "Irlandzki (Irlandia)",
+ "xh": "isiXhosa (Republika Południowej Afryki)",
+ "zu": "isiZulu (Republika Południowej Afryki)",
+ "ja": "Japoński (Japonia)",
+ "kn": "Kannada (Indie)",
+ "kk": "Kazachski (Kazachstan)",
+ "km": "Khmerski (Kambodża)",
+ "rw": "Kinjarwanda (Rwanda)",
+ "sw": "Suahili (Kenia)",
+ "kok": "Konkani (Indie)",
+ "ko": "Koreański (Korea Południowa)",
+ "ky": "Kirgiski (Kirgistan)",
+ "lo": "Laotański (Laotańska RLD)",
+ "lv": "Łotewski (Łotwa)",
+ "lt": "Litewski (Litwa)",
+ "lb": "Luksemburski (Luksemburg)",
+ "mk": "Macedoński (Macedonia Północna)",
+ "ml": "Malajalam (Indie)",
+ "mt": "Maltański (Malta)",
+ "mi": "Maoryjski (Nowa Zelandia)",
+ "mr": "Marathi (Indie)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepalski (Nepal)",
+ "oc": "Okcytański (Francja)",
+ "or": "Orija (Indie)",
+ "ps": "Paszto (Afganistan)",
+ "fa": "Perski",
+ "pl": "Polski (Polska)",
+ "pa": "Pendżabski (Indie)",
+ "ro": "Rumuński (Rumunia)",
+ "rm": "Romansz (retoromański, Szwajcaria)",
+ "ru": "Rosyjski (Rosja)",
+ "sa": "Sanskryt (Indie)",
+ "st": "Sesotho północny (Republika Południowej Afryki)",
+ "tn": "Setswana (Republika Południowej Afryki)",
+ "si": "Sinhala (Sri Lanka)",
+ "sk": "Słowacki (Słowacja)",
+ "sl": "Słoweński (Słowenia)",
+ "sv": "Szwedzki (Szwecja)",
+ "syr": "Syryjski (Syria)",
+ "tg": "Tadżycki (cyrylica, Tadżykistan)",
+ "ta": "Tamilski (Indie)",
+ "tt": "Tatarski (Rosja)",
+ "te": "Telugu (Indie)",
+ "th": "Tajski (Tajlandia)",
+ "bo": "Tybetański (ChRL)",
+ "tr": "Turecki (Turcja)",
+ "tk": "Turkmeński (Turkmenistan)",
+ "uk": "Ukraiński (Ukraina)",
+ "ur": "Urdu (Islamska Republika Pakistanu)",
+ "vi": "Wietnamski (Wietnam)",
+ "cy": "Walijski (Zjednoczone Królestwo)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (ChRL)",
+ "yo": "Joruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Rola wbudowana",
+ "customCloudPCRole": "Niestandardowa rola systemu Windows 365",
+ "customIntuneRole": "Niestandardowa rola usługi Intune",
+ "customRole": "Rola niestandardowa"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "Wersja aplikacji",
+ "dependencyName": "Nazwa zależności",
+ "lastModifiedTime": "Czas ostatniej modyfikacji",
+ "relationship": "Relacja",
+ "replaced": "Zastąpiono",
+ "searchPlaceholder": "Filtruj według nazwy aplikacji",
+ "status": "Szczegóły stanu",
+ "statusDetails": "Stan",
+ "supersedenceName": "Nazwa zastępowania"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Zależność podrzędna",
+ "indirectSupersedence": "Niezwiązane bezpośrednio",
+ "supersedenceAncestors": "Zastępujący",
+ "supersedenceDescendants": "Zastąpione"
+ },
+ "SupersededReplaced": {
+ "no": "Nie",
+ "yes": "Tak"
+ },
+ "Tabs": {
+ "chart": "Wykres",
+ "dependency": "Zależność",
+ "label": "Widok: ",
+ "supersedence": "Zastępowanie",
+ "table": "Tabela"
+ },
+ "dependencyGraphAriaLabel": "Wykres zależności aplikacji",
+ "supersedenceGraphAriaLabel": "Wykres zastępowania aplikacji"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Liczba dni oczekiwania przed wymuszeniem ponownego uruchomienia"
+ },
+ "Description": {
+ "label": "Opis"
+ },
+ "Name": {
+ "label": "Nazwa"
+ },
+ "QualityUpdateRelease": {
+ "label": "Przyspiesz instalację aktualizacji dotyczących jakości, jeśli wersja systemu operacyjnego urządzenia jest mniejsza niż:"
+ },
+ "bladeTitle": "Aktualizacje dotyczące jakości systemu Windows 10 i nowszych (wersja zapoznawcza)",
+ "loadError": "Ładowanie nie powiodło się."
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Ustawienia"
+ },
+ "infoBoxText": "Jedyną obecnie dostępną dedykowaną kontrolą aktualizacji dotyczącej jakości poza istniejącymi zasadami pierścieni aktualizacji systemu Windows 10 i nowszych jest możliwość przyspieszenia aktualizacji dotyczących jakości dla urządzeń, które są poza określonym poziomem poprawek. Dodatkowe kontrole będą dostępne w przyszłości.",
+ "licenseLearnMoreText": "Dowiedz się więcej o wymaganiach wstępnych i zasadach aktualizacji dotyczących jakości.",
+ "licenseWarningBoxText": "Tworzenie zasad aktualizacji dotyczących jakości wymaga określonego licencjonowania.",
+ "warningBoxText": "Przyspieszanie aktualizacji oprogramowania może skrócić czas do uzyskania zgodności w razie potrzeby, ale ma większy wpływ na produktywność użytkowników końcowych. Znacznie wzrasta prawdopodobieństwo wymuszonych ponownych uruchomień w godzinach pracy użytkowników."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "W systemie Android możesz używać identyfikacji za pomocą odcisków palców zamiast numeru PIN. Użytkownicy widzą monit o przedstawienie odcisków palców w przypadku uzyskiwania dostępu do tej aplikacji z konta służbowego.",
+ "iOS": "W przypadku urządzeń z systemem iOS/iPadOS można zezwolić na identyfikację przy użyciu odcisku palca zamiast numeru PIN. Użytkownicy są proszeni o identyfikację za pomocą odcisku palca podczas otwierania tej aplikacji przy użyciu konta służbowego.",
+ "mac": "W przypadku urządzeń z systemem Mac można zezwolić na identyfikację przy użyciu odcisku palca zamiast numeru PIN. Użytkownicy są proszeni o identyfikację za pomocą odcisku palca podczas otwierania tej aplikacji przy użyciu konta służbowego."
+ },
+ "allowWidgetContentSync": "Wybierz opcję Blokuj, aby uniemożliwić aplikacjom zarządzanym przez zasady zapisywanie danych w widżetach aplikacji. Jeśli wybierzesz opcję Zezwalaj, aplikacja zarządzana przez zasady będzie mogła zapisywać dane w widżetach aplikacji, jeśli te funkcje są obsługiwane i włączone w aplikacji zarządzanej przez zasady. \r\n\r\n \r\n\r\nAplikacje mogą zapewniać dodatkowe możliwości konfiguracji za pomocą zasad konfigurowania aplikacji. Aby uzyskać więcej informacji, zobacz dokumentację aplikacji.",
+ "appSharingFromLevel1": "Wybierz jedną z następujących opcji, aby określić aplikacje, z których ta aplikacja może odbierać dane:",
+ "appSharingFromLevel2": "{0}: zezwalaj na odbieranie danych w ramach kont lub dokumentów organizacji tylko z innych aplikacji zarządzanych przez zasady",
+ "appSharingFromLevel3": "{0}: zezwalaj na odbieranie danych w ramach kont lub dokumentów organizacji z dowolnej aplikacji",
+ "appSharingFromLevel4": "{0}: nie zezwalaj na odbieranie danych w ramach kont lub dokumentów organizacji z żadnej aplikacji",
+ "appSharingFromLevel5": "{0}: Zezwalaj na transfer danych z dowolnej aplikacji i traktuj wszystkie dane przychodzące bez tożsamości użytkownika jak dane organizacji.",
+ "appSharingToLevel1": "Wybierz jedną z następujących opcji, aby określić aplikacje, do których ta aplikacja może wysyłać dane:",
+ "appSharingToLevel2": "{0}: zezwalaj na wysyłanie danych organizacji tylko do innych aplikacji zarządzanych przez zasady",
+ "appSharingToLevel3": "{0}: zezwalaj na wysyłanie danych organizacji do dowolnej aplikacji",
+ "appSharingToLevel4": "{0}: nie zezwalaj na wysyłanie danych organizacji do żadnej aplikacji",
+ "appSharingToLevel5": "{0}: Zezwalaj na transfer tylko do innych aplikacji zarządzanych przez zasady i transfer plików do innych aplikacji zarządzanych za pomocą funkcji MDM na zarejestrowanych urządzeniach",
+ "appSharingToLevel6": "{0}: Zezwalaj na transfer tylko do innych aplikacji zarządzanych przez zasady i filtruj okna dialogowe systemu operacyjnego do otwierania/udostępniania, aby były wyświetlane tylko aplikacje zarządzane przez zasady",
+ "assignmentFilterEdit1": "Jeśli zastosujesz filtry przypisania do tych zasad, właściwość „Typ zarządzania urządzeniami” będzie stosowana oprócz wartości określonych dla wartości „Miejsce docelowe dla aplikacji w przypadku wszystkich typów urządzeń” i „Typy urządzeń” na stronie „Aplikacje”.",
+ "assignmentFilterEdit2": "Dowiedz się więcej o przypisywaniu zasad ochrony aplikacji.",
+ "conditionalEncryption1": "Wybierz opcję {0}, aby wyłączyć szyfrowanie aplikacji obejmujące wewnętrzny magazyn aplikacji, jeśli na zarejestrowanym urządzeniu zostanie wykryte szyfrowanie urządzenia.",
+ "conditionalEncryption2": "Uwaga: Usługa Intune wykrywa tylko rejestrację urządzenia przy użyciu zarządzania urządzeniami przenośnymi usługi Intune. Zewnętrzny magazyn aplikacji wciąż będzie szyfrowany, aby uniemożliwić niezarządzanym aplikacjom dostęp do danych.",
+ "contactSyncMac": "Jeśli ta opcja jest wyłączona, aplikacje nie mogą zapisywać kontaktów w natywnej książce adresowej.",
+ "contactsSync": "Wybierz pozycję Blokuj, aby uniemożliwić aplikacjom zarządzanym przez zasady zapisywanie danych w natywnych aplikacjach urządzenia (takich jak Kontakty, Kalendarz i widżety) albo zapobiec używaniu dodatków w aplikacjach zarządzanych przez zasady. Jeśli wybierzesz pozycję Zezwalaj na, aplikacja zarządzana przez zasady będzie mogła zapisywać dane w aplikacjach natywnych lub używać dodatków, jeśli te funkcje są obsługiwane i włączone w ramach aplikacji zarządzanej przez zasady.
Aplikacje mogą udostępniać dodatkowe możliwości konfiguracji za pomocą zasad konfiguracji aplikacji. Aby uzyskać więcej informacji, zobacz dokumentację aplikacji.",
+ "deviceTypeTargetingCreate1": "Określanie docelowych typów urządzenia jest przeniesione do kroku Przypisania podczas tworzenia zasad.",
+ "deviceTypeTargetingEdit1": "Jeśli zastosujesz filtry przypisania do tych zasad, właściwość „Typ zarządzania urządzeniami” będzie stosowana oprócz wartości określonych dla wartości „Miejsce docelowe dla aplikacji w przypadku wszystkich typów urządzeń” i „Typy urządzeń” na stronie „Aplikacje”.",
+ "deviceTypeTargetingEdit2": "Aby edytować określanie docelowych typów zarządzania urządzeniami, zresetuj właściwość „Miejsce docelowe dla aplikacji w przypadku wszystkich typów urządzeń” = „Tak”. Następnie utwórz filtr przypisania zarządzania aplikacjami mobilnymi z żądanymi wartościami dla właściwości „Typ zarządzania urządzeniami”.",
+ "deviceTypeTargetingHasMoved": "Dowiedz się więcej o przypisywaniu zasad ochrony aplikacji",
+ "encryptionAndroid1": "W przypadku aplikacji skojarzonych z zasadami zarządzania aplikacjami mobilnymi usługi Intune szyfrowanie jest zapewniane przez firmę Microsoft. Dane są szyfrowane synchronicznie podczas operacji we/wy na plikach zgodnie z ustawieniem w zasadach zarządzania aplikacjami mobilnymi. W zarządzanych aplikacjach w systemie Android stosowane jest szyfrowanie AES-128 w trybie CBC przy użyciu bibliotek kryptograficznych platformy. Ta metoda szyfrowania nie jest zgodna ze standardem FIPS 140-2. Szyfrowanie SHA-256 jest obsługiwane jako jawna instrukcja przy użyciu parametru SigAlg i działa tylko w przypadku urządzeń z systemem w wersji 4.2 lub nowszej. Zawartość w pamięci masowej urządzenia jest zawsze szyfrowana.",
+ "encryptionAndroid2": "Gdy w zasadach aplikacji wymagane jest szyfrowanie, wymagane jest skonfigurowanie numeru PIN i uzyskiwanie dostępu do urządzenia za jago pomocą. Jeśli nie skonfigurowano numeru PIN do uzyskiwania dostępu do urządzenia, aplikacje nie zostaną uruchomione, a zamiast tego zostanie wyświetlony komunikat „Firma wymaga włączenia numeru PIN urządzenia w celu uzyskania dostępu do tej aplikacji”.",
+ "encryptionMac1": "W przypadku aplikacji skojarzonych z zasadami zarządzania aplikacjami mobilnymi usługi Intune szyfrowanie jest zapewniane przez firmę Microsoft. Dane są szyfrowane synchronicznie podczas operacji we/wy na plikach zgodnie z ustawieniem w zasadach zarządzania aplikacjami mobilnymi. W zarządzanych aplikacjach w systemie Mac stosowane jest szyfrowanie AES-128 w trybie CBC przy użyciu bibliotek kryptograficznych platformy. Ta metoda szyfrowania nie jest zgodna ze standardem FIPS 140-2. Szyfrowanie SHA-256 jest obsługiwane jako jawna instrukcja przy użyciu parametru SigAlg i działa tylko w przypadku urządzeń z systemem w wersji 4.2 lub nowszej. Zawartość w pamięci masowej urządzenia jest zawsze szyfrowana.",
+ "faceId1": "Czasami można zezwolić na korzystanie z rozpoznawania twarzy zamiast z numeru PIN. Użytkownicy będą proszeni o przeprowadzenie identyfikacji twarzy przy próbie otwarcia tej aplikacji za pomocą kont służbowych.",
+ "faceId2": "Wybierz pozycję Tak, aby zezwolić na identyfikację twarzy zamiast numeru PIN przy otwieraniu aplikacji.",
+ "managementLevelsAndroid1": "Użyj tej opcji, aby określić, czy te zasady mają zastosowanie do urządzeń administratora urządzeń systemu Android, urządzeń z profilem rozwiązania Android Enterprise czy urządzeń niezarządzanych.",
+ "managementLevelsAndroid2": "{0}: Urządzenia niezarządzane to urządzenia, na których nie wykryto zarządzania przez usługę Intune MDM. Dotyczy to też usług MDM innych dostawców.",
+ "managementLevelsAndroid3": "{0}: urządzenia zarządzane przez usługę Intune za pomocą administracyjnego interfejsu API urządzenia z systemem Android.",
+ "managementLevelsAndroid4": "{0}: urządzenia zarządzane przez usługę Intune za pomocą profilów służbowych rozwiązania Android Enterprise lub pełnego zarządzania urządzeniami w rozwiązaniu Android Enterprise.",
+ "managementLevelsIos1": "Użyj tej opcji, aby określić, czy te zasady mają zastosowanie do urządzeń zarządzanych przez usługę MDM, czy urządzeń niezarządzanych.",
+ "managementLevelsIos2": "{0}: Urządzenia niezarządzane to urządzenia, na których nie wykryto zarządzania przez usługę Intune MDM. Dotyczy to też usług MDM innych dostawców.",
+ "managementLevelsIos3": "{0}: Urządzenia zarządzane są zarządzane przez usługę Intune MDM.",
+ "minAppVersion": "Zdefiniuj wymaganą minimalną wersję aplikacji, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
+ "minAppVersionWarning": "Zdefiniuj zalecaną minimalną wersję aplikacji, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
+ "minOsVersion": "Zdefiniuj wymaganą minimalną wersję systemu operacyjnego, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
+ "minOsVersionWarning": "Zdefiniuj zalecaną minimalną wersję systemu operacyjnego, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
+ "minPatchVersion": "Zdefiniuj najstarszy wymagany poziom poprawki zabezpieczeń systemu Android, jaką może mieć użytkownik, aby uzyskiwać bezpieczny dostęp do aplikacji.",
+ "minPatchVersionWarning": "Zdefiniuj najstarszy zalecany poziom poprawki zabezpieczeń systemu Android, jaką może mieć użytkownik, aby uzyskiwać bezpieczny dostęp do aplikacji.",
+ "minSdkVersion": "Zdefiniuj wymaganą minimalną wersję zestawu SDK ochrony aplikacji, którą powinien posiadać użytkownik w celu uzyskania bezpiecznego dostępu do aplikacji.",
+ "requireAppPinDefault": "
Wybierz pozycję Tak, aby wyłączyć numer PIN aplikacji, gdy na zarejestrowanym urządzeniu zostanie wykryta blokada urządzenia.
",
+ "targetAllApps1": "Użyj tej opcji, aby objąć swoimi zasadami aplikacje na urządzeniach z dowolnym stanem zarządzania.",
+ "targetAllApps2": "Podczas rozwiązywania konfliktów zasad to ustawienie będzie zastępowane, jeśli użytkownik ma zasady przeznaczone dla konkretnego stanu zarządzania.",
+ "touchId2": "Wybierz opcję {0}, aby określić wymaganie identyfikacji za pomocą odcisku palca zamiast numeru PIN w celu uzyskania dostępu do aplikacji."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Określ liczbę dni, które muszą upłynąć, zanim użytkownik będzie musiał zresetować numer PIN.",
+ "previousPinBlockCount": "To ustawienie określa liczbę poprzednich kodów PIN, które będą przechowywane przez usługę Intune. Nowe kody PIN muszą być inne niż kody przechowywane przez usługę Intune."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Umożliwi to funkcji Windows Search kontynuowanie wyszukiwania w zaszyfrowanych danych.",
+ "authoritativeIpRanges": "Włącz to ustawienie, jeśli chcesz przesłonić automatyczne wykrywanie zakresów adresów IP przez system Windows.",
+ "authoritativeProxyServers": "Włącz to ustawienie, jeśli chcesz przesłonić automatyczne wykrywanie serwerów proxy przez system Windows.",
+ "checkInput": "Sprawdź poprawność danych wejściowych",
+ "dataRecoveryCert": "Certyfikat odzyskiwania to specjalny certyfikat systemu szyfrowania plików (EFS, Encrypting File System), którego można użyć, aby odzyskać zaszyfrowane pliki w razie utraty lub uszkodzenia klucza szyfrowania. Musisz utworzyć certyfikat odzyskiwania i podać go w tym miejscu. Więcej informacji można znaleźć tutaj",
+ "enterpriseCloudResources": "
Określ zasoby chmury, które mają być traktowane jako firmowe i chronione przez zasady rozwiązania Windows Information Protection. Aby określić wiele wartości, można oddzielić poszczególne wpisy znakiem „|”.
Jeśli w firmie jest skonfigurowany serwer proxy, możesz określić serwer proxy, przez który będzie kierowany ruch do określonych zasobów chmury.
adres_URL[,serwer_proxy]|adres_URL[,serwer_proxy]
Bez serwera proxy: contoso.sharepoint.com|contoso.visualstudio.com Z serwerem proxy: contoso.sharepoint.com,serwer_proxy.contoso.com|contoso.visualstudio.com,serwer_proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Określ zakresy adresów IPv4 sieci firmowej. Są one używane razem z określonymi nazwami domen sieci przedsiębiorstwa określonymi w celu zdefiniowania granic sieci firmowej.
To ustawienie jest wymagane do włączenia rozwiązania Windows Information Protection
Aby określić wiele wartości, można oddzielić poszczególne wpisy przecinkiem.
Określ zakresy adresów IPv6 sieci firmowej. Są one używane razem z nazwami domen sieci przedsiębiorstwa określonymi w celu zdefiniowania granic sieci firmowej
Aby określić wiele wartości, można oddzielić poszczególne wpisy przecinkiem.
Jeśli w Twojej firmie skonfigurowano serwer proxy, możesz określić serwer proxy, przez który ma być kierowany ruch do zasobów w chmurze określonych w ustawieniach zasobów przedsiębiorstwa w chmurze.
Aby określić wiele wartości, można oddzielić poszczególne wpisy średnikiem.
Określ nazwy DNS sieci firmowej. Są one używane razem z zakresami adresów IP określonymi w celu zdefiniowania granic sieci firmowej. Aby określić wiele wartości, można oddzielić poszczególne wpisy przecinkiem.
To ustawienie jest wymagane do włączenia rozwiązania Windows Information Protection.
Przykład: ncorp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Określ nazwy DNS, które tworzą Twoją sieć korporacyjną. Są one używane w połączeniu z zakresami adresów IP określonymi w celu zdefiniowania granic Twojej sieci korporacyjnej. Można określić wiele wartości, oddzielając poszczególne wpisy znakiem „|”.
To ustawienie jest wymagane do włączenia usługi Windows Information Protection.
Na przykład: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
Jeśli w sieci firmowej są używane widoczne z zewnątrz serwery proxy, określ je tutaj. Oprócz adresu serwera proxy należy także określić port, przez który ruch ma być dozwolony i chroniony za pośrednictwem rozwiązania Windows Information Protection.
Uwaga: lista ta nie może zawierać serwerów znajdujących się na liście wewnętrznych serwerów proxy przedsiębiorstwa. Aby określić wiele wartości, można oddzielić poszczególne wpisy średnikiem.
",
+ "maxInactivityTime1": "Określa maksymalny czas (w minutach) bezczynności urządzenia, po którym urządzenie zostanie zablokowane przy użyciu kodu PIN lub hasła. Użytkownicy mogą wybrać dowolną istniejącą wartość limitu czasu mniejszą niż maksymalny czas określony w aplikacji Ustawienia. Pamiętaj, że telefony Lumia 950 i 950XL mają maksymalną wartość limitu czasu wynoszącą 5 minut, niezależnie od wartości ustawionej za pomocą tych zasad.",
+ "maxInactivityTime2": "0 (domyślnie) — brak zdefiniowanego limitu czasu. Wartość domyślna „0” jest interpretowana jako „Brak zdefiniowanego limitu czasu”.",
+ "maxPasswordAttempts1": "Zachowanie tych zasad jest inne na urządzeniach przenośnych i komputerach stacjonarnych.",
+ "maxPasswordAttempts2": "Na urządzeniu przenośnym, gdy użytkownik osiągnie wartość ustawioną przy użyciu tych zasad, urządzenie jest czyszczone.",
+ "maxPasswordAttempts3": "Na komputerze stacjonarnym, gdy użytkownik osiągnie wartość ustawioną przy użyciu tych zasad, komputer nie jest czyszczony. Zamiast tego komputer jest przełączany w tryb odzyskiwania funkcji BitLocker, co sprawia, że dane są niedostępne, ale możliwe do odzyskania. Jeśli funkcja BitLocker nie jest włączona, tych zasad nie można wymusić.",
+ "maxPasswordAttempts4": "Przed osiągnięciem limitu nieudanych prób użytkownik jest kierowany do ekranu blokady i ostrzegany o tym, że kolejne nieudane próby spowodują zablokowanie komputera. Gdy użytkownik osiągnie limit, urządzenie zostanie uruchomione ponownie i zostanie wyświetlona strona odzyskiwania funkcji BitLocker. Na tej stronie jest wyświetlany monit o wprowadzenie przez użytkownika klucza odzyskiwania funkcji BitLocker.",
+ "maxPasswordAttempts5": "0 (domyślnie) — urządzenie nie jest nigdy czyszczone po wprowadzeniu nieprawidłowego kodu PIN lub hasła.",
+ "maxPasswordAttempts6": "Najbezpieczniejsza wartość to 0, jeśli wszystkie wartości zasad są równe 0. W przeciwnym razie najbezpieczniejsza jest minimalna wartość zasad.",
+ "mdmDiscoveryUrl": "Określ adres URL dla punktu końcowego rejestracji zarządzania urządzeniami przenośnymi, z którego będą korzystać użytkownicy dokonujący rejestracji w funkcji zarządzania urządzeniami przenośnymi. Domyślnie to ustawienie jest określone dla usługi Intune.",
+ "minimumPinLength1": "Liczba całkowita, która określa wymaganą minimalną liczbę znaków w kodzie PIN. Wartość domyślna wynosi 4. Najniższa wartość, którą można skonfigurować dla tego ustawienia zasad to 4. Najwyższa wartość, którą można skonfigurować, musi być mniejsza niż liczba skonfigurowana w ustawieniu maksymalnej długości kodu PIN w zasadach lub liczba 127, zależnie od tego, która wartość jest niższa.",
+ "minimumPinLength2": "Jeśli to ustawienie zasad zostanie skonfigurowane, długość kodu PIN musi być większa lub równa tej liczbie. Jeśli to ustawienie zasad zostanie wyłączone lub nie zostanie skonfigurowane, długość kodu PIN musi być większa lub równa 4.",
+ "name": "Nazwa tej granicy sieci",
+ "neutralResources": "
Jeśli w Twojej firmie są używane punkty końcowe przekierowywania uwierzytelniania, określ je tutaj. Określone tutaj lokalizacje są uznawane za osobiste lub firmowe w zależności od kontekstu połączenia przed przekierowaniem.
Aby określić wiele wartości, można oddzielić poszczególne wpisy przecinkiem.
Przykład: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Wartość, która ustawia funkcję Windows Hello dla firm jako metodę logowania do systemu Windows.",
+ "passportForWork2": "Wartość domyślna to true. Jeśli dla tych zasad zostanie ustawiona wartość false, użytkownik nie może aprowizować funkcji Windows Hello dla firm, z wyjątkiem telefonów komórkowych dołączonych do usługi Microsoft Entra, które wymagają aprowizacji.",
+ "pinExpiration": "Najwyższa liczba, którą można skonfigurować dla tego ustawienia zasad to 730. Najniższa liczba, którą można skonfigurować dla tego ustawienia zasad to 0. Jeśli dla tych zasad zostanie ustawiona wartość 0, kod PIN użytkownika nigdy nie wygasa.",
+ "pinHistory1": "Najwyższa liczba, którą można skonfigurować dla tego ustawienia zasad to 50. Najniższa liczba, którą można skonfigurować dla tego ustawienia zasad to 0. Jeśli dla tych zasad zostanie ustawiona wartość 0, przechowywanie poprzednich kodów PIN nie jest wymagane.",
+ "pinHistory2": "Bieżący kod PIN użytkownika należy do zestawu kodów PIN skojarzonych z kontem użytkownika. Historia kodów PIN nie jest zachowywana po zresetowaniu kodu PIN.",
+ "protectUnderLock": "Chroni zawartość aplikacji, gdy urządzenie jest w stanie zablokowanym.",
+ "protectionModeBlock": "
Blokuj: Blokuje możliwość przeniesienia danych przedsiębiorstwa poza chronione aplikacje.
",
+ "protectionModeOff": "
Wyłączone: Użytkownik może przenosić dane poza chronione aplikacje. Żadne akcje nie są rejestrowane.
",
+ "protectionModeOverride": "
Zezwalaj na przesłonięcia: Podczas próby przeniesienia danych z aplikacji chronionej do niechronionej użytkownikowi jest wyświetlany monit. W przypadku przesłonięcia tego monitu akcja zostanie zarejestrowana.
",
+ "protectionModeSilent": "
Dyskretne: Użytkownik może przenosić dane poza chronione aplikacje. Te akcje są rejestrowane.
",
+ "required": "Wymagane",
+ "revokeOnMdmHandoff": "Dodano w systemie Windows 10 w wersji 1703. Te zasady służą do kontrolowania, czy klucze WIP mają zostać odwołane po uaktualnieniu urządzenia z usługi MAM do usługi MDM. W przypadku ustawienia na wartość „Wyłączone” klucze nie zostaną odwołane, a użytkownik będzie nadal mieć dostęp do chronionych plików po uaktualnieniu. Jest to zalecane, jeśli usługa MDM jest skonfigurowana za pomocą tego samego atrybutu EnterpriseID klucza WIP, co usługa MAM.",
+ "revokeOnUnenroll": "Spowoduje to odwołanie kluczy szyfrowania, gdy rejestracja urządzenia dla tych zasad zostanie anulowana.",
+ "rmsTemplateForEdp": "Identyfikator GUID TemplateID na potrzeby szyfrowania za pomocą usługi RMS. Szablon usługi Azure RMS umożliwia administratorowi IT skonfigurowanie szczegółów dotyczących użytkowników mających dostęp do pliku chronionego przy użyciu usługi RMS oraz okresu, w którym dostęp jest możliwy.",
+ "showWipIcon": "W ten sposób, przez nałożenie ikony, użytkownik jest informowany, że działa w kontekście firmy.",
+ "useRmsForWip": "Określa, czy zezwalać na szyfrowanie przy użyciu usługi Azure RMS na potrzeby funkcji WIP."
+ },
+ "requireAppPin": "
Wybierz pozycję Tak, aby wyłączyć numer PIN aplikacji, gdy na zarejestrowanym urządzeniu zostanie wykryta blokada urządzenia.
Uwaga: usługa Intune nie może wykryć rejestracji urządzeń za pomocą rozwiązania EMM innej firmy w systemie iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Utwórz skrypt niestandardowy",
+ "edit": "Edytuj skrypt niestandardowy"
+ },
+ "basicInfo": "Utwórz nowy niestandardowy pakiet skryptu na podstawie napisanych przez siebie skryptów wykrywania i korygowania.",
+ "customScriptCapitalized": "Skrypt niestandardowy",
+ "customScriptLowercase": "skrypt niestandardowy",
+ "detectionScript": "Skrypt wykrywania"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Domyślny",
+ "header": "Aktualizuj priorytet",
+ "postponed": "Odłożone",
+ "priority": "Wysoki priorytet"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Automatyczna aktualizacja",
+ "sublabel": "Jeśli zastąpione aplikacje zostały zainstalowane przez użytkownika z portalu firmy, należy zainstalować aplikację zastępującą."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Tło",
+ "displayText": "Pobieranie zawartości za {0}",
+ "foreground": "Pierwszy plan",
+ "header": "Priorytet optymalizacji dostarczania"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Zezwalaj użytkownikowi na odłożenie powiadomienia o ponownym uruchomieniu",
+ "countdownDialog": "Wybierz, kiedy wyświetlić okno dialogowe odliczania do ponownego uruchomienia przed ponownym uruchomieniem (minuty)",
+ "durationInMinutes": "Okres prolongaty ponownego uruchomienia urządzenia (minuty)",
+ "snoozeDurationInMinutes": "Wybierz czas trwania odłożenia (minuty)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Strefa czasowa",
+ "local": "Strefa czasowa urządzenia",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Data i godzina",
+ "deadlineTimeColumnLabel": "Ostateczny termin instalacji",
+ "deadlineTimeDatePickerErrorMessage": "Wybrana data musi być późniejsza niż data dostępności",
+ "deadlineTimeLabel": "Ostateczny termin instalacji aplikacji",
+ "defaultTime": "Najszybciej, jak to możliwe",
+ "infoText": "Ta aplikacja będzie dostępna zaraz po wdrożeniu, chyba że poniżej określisz czas dostępności. Jeśli jest to wymagana aplikacja, możesz określić termin instalacji.",
+ "specificTime": "Określona data i godzina",
+ "startTimeColumnLabel": "Dostępność",
+ "startTimeDatePickerErrorMessage": "Wybrana data musi być wcześniejsza niż termin ostateczny",
+ "startTimeLabel": "Dostępność aplikacji"
+ },
+ "restartGracePeriodHeader": "Okres prolongaty ponownego uruchomienia",
+ "restartGracePeriodLabel": "Okres prolongaty ponownego uruchomienia urządzenia",
+ "summaryTitle": "Środowisko użytkownika końcowego"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Przypisz atrybut niestandardowy do co najmniej jednej grupy. Przejdź do właściwości, aby edytować przypisania.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Skrypt powłoki",
"successfullySavedPolicy": "Zapisano zasady {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64-bitowa",
+ "thirtyTwoBit": "32-bitowa"
+ },
+ "Countries": {
+ "ae": "Zjednoczone Emiraty Arabskie",
+ "ag": "Antigua i Barbuda",
+ "ai": "Anguilla",
+ "al": "Albania",
+ "am": "Armenia",
+ "ao": "Angola",
+ "ar": "Argentyna",
+ "at": "Austria",
+ "au": "Australia",
+ "az": "Azerbejdżan",
+ "bb": "Barbados",
+ "be": "Belgia",
+ "bf": "Burkina Faso",
+ "bg": "Bułgaria",
+ "bh": "Bahrajn",
+ "bj": "Benin",
+ "bm": "Bermudy",
+ "bn": "Brunei",
+ "bo": "Boliwia",
+ "br": "Brazylia",
+ "bs": "Bahamy",
+ "bt": "Bhutan",
+ "bw": "Botswana",
+ "by": "Białoruś",
+ "bz": "Belize",
+ "ca": "Kanada",
+ "cg": "Republika Konga",
+ "ch": "Szwajcaria",
+ "cl": "Chile",
+ "cn": "Chiny",
+ "co": "Kolumbia",
+ "cr": "Kostaryka",
+ "cv": "Wyspy Zielonego Przylądka",
+ "cy": "Cypr",
+ "cz": "Czechy",
+ "de": "Niemcy",
+ "dk": "Dania",
+ "dm": "Dominika",
+ "do": "Dominikana",
+ "dz": "Algieria",
+ "ec": "Ekwador",
+ "ee": "Estonia",
+ "eg": "Egipt",
+ "es": "Hiszpania",
+ "fi": "Finlandia",
+ "fj": "Fidżi",
+ "fm": "Sfederowane Stany Mikronezji",
+ "fr": "Francja",
+ "gb": "Zjednoczone Królestwo",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Grecja",
+ "gt": "Gwatemala",
+ "gw": "Gwinea Bissau",
+ "gy": "Gujana",
+ "hk": "Hongkong SAR",
+ "hn": "Honduras",
+ "hr": "Chorwacja",
+ "hu": "Węgry",
+ "id": "Indonezja",
+ "ie": "Irlandia",
+ "il": "Izrael",
+ "in": "Indie",
+ "is": "Islandia",
+ "it": "Włochy",
+ "jm": "Jamajka",
+ "jo": "Jordania",
+ "jp": "Japonia",
+ "ke": "Kenia",
+ "kg": "Kirgistan",
+ "kh": "Kambodża",
+ "kn": "St. Kitts i Nevis",
+ "kr": "Republika Korei",
+ "kw": "Kuwejt",
+ "ky": "Kajmany",
+ "kz": "Kazachstan",
+ "la": "Laotańska Republika Ludowo-Demokratyczna",
+ "lb": "Liban",
+ "lc": "Saint Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Litwa",
+ "lu": "Luksemburg",
+ "lv": "Łotwa",
+ "md": "Republika Mołdawii",
+ "mg": "Madagaskar",
+ "mk": "Macedonia Północna",
+ "ml": "Mali",
+ "mn": "Mongolia",
+ "mo": "Makau",
+ "mr": "Mauretania",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Meksyk",
+ "my": "Malezja",
+ "mz": "Mozambik",
+ "na": "Namibia",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nikaragua",
+ "nl": "Holandia",
+ "no": "Norwegia",
+ "np": "Nepal",
+ "nz": "Nowa Zelandia",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua Nowa Gwinea",
+ "ph": "Filipiny",
+ "pk": "Pakistan",
+ "pl": "Polska",
+ "pt": "Portugalia",
+ "pw": "Palau",
+ "py": "Paragwaj",
+ "qa": "Katar",
+ "ro": "Rumunia",
+ "ru": "Rosja",
+ "sa": "Arabia Saudyjska",
+ "sb": "Wyspy Salomona",
+ "sc": "Seszele",
+ "se": "Szwecja",
+ "sg": "Singapur",
+ "si": "Słowenia",
+ "sk": "Słowacja",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Surinam",
+ "st": "Wyspy Świętego Tomasza i Książęca",
+ "sv": "Salwador",
+ "sz": "Suazi",
+ "tc": "Turks i Caicos",
+ "td": "Czad",
+ "th": "Tajlandia",
+ "tj": "Tadżykistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunezja",
+ "tr": "Turcja",
+ "tt": "Trynidad i Tobago",
+ "tw": "Tajwan",
+ "tz": "Tanzania",
+ "ua": "Ukraina",
+ "ug": "Uganda",
+ "us": "Stany Zjednoczone",
+ "uy": "Urugwaj",
+ "uz": "Uzbekistan",
+ "vc": "Saint Vincent i Grenadyny",
+ "ve": "Wenezuela",
+ "vg": "Brytyjskie Wyspy Dziewicze",
+ "vn": "Wietnam",
+ "ye": "Jemen",
+ "za": "Republika Południowej Afryki",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Tego ustawienia nie można konfigurować za pomocą identyfikatora OMA-URI, ponieważ znajduje się ono w wykazie ustawień. Przejdź do wykazu ustawień, aby skonfigurować to ustawienie."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Wybierz plik profilu konfiguracji"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Te ustawienia działają dla urządzeń zarejestrowanych za pośrednictwem rejestracji urządzeń za zgodą użytkownika lub bez niej oraz dla urządzeń zarejestrowanych przy użyciu zautomatyzowanej rejestracji urządzeń (wcześniej: DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Rejestracja urządzeń i automatyczna rejestracja urządzeń",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Rejestracja urządzeń i automatyczna rejestracja urządzeń",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Skonfiguruj aplikację Microsoft Launcher na swoich w pełni zarządzanych urządzeniach.",
+ "deviceExperienceTypeDescription": "Na podstawie środowiska, które chcesz skonfigurować, wybierz pozycję Tryb kiosku lub Microsoft Launcher, aby rozpocząć konfigurowanie środowiska na urządzeniach. Jeśli nie wybierzesz typu środowiska urządzenia, użytkownicy zobaczą domyślne środowisko ekranu głównego urządzenia.",
+ "deviceExperienceTypeKioskMode": "Tryb kiosku (dedykowany i w pełni zarządzany)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Użyj aplikacji Microsoft Launcher, aby dostosować ekran główny na urządzeniach zarządzanych przez organizację. Jeśli ustawisz aplikację Launcher jako domyślną, użytkownicy urządzenia nie będą mogli korzystać z innego modułu uruchamiania.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Ustaw aplikację Microsoft Launcher jako domyślny moduł uruchamiania",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (tylko w pełni zarządzana)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Użytkownicy nie będą mogli zmienić tapety, jeśli nie im na to nie zezwolisz. To ustawienie jest dostępne tylko w przypadku skonfigurowania tapety niestandardowej.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Zezwalaj użytkownikowi na modyfikowanie tapety",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Umożliwia zastosowanie własnego obrazu jako tapety ekranu głównego i wybranie, czy użytkownik może ją zmienić. Jeśli nie skonfigurujesz tapety niestandardowej, urządzenie zachowa swoją bieżącą tapetę.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Konfiguruj tapetę niestandardową",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Ten obraz będzie widoczny jako tapeta na ekranie głównym urządzenia. To pole jest dostępne tylko w przypadku skonfigurowania tapety niestandardowej.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Wprowadź adres URL obrazu tapety",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Wyłączono",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Ukryj",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Pokaż",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Jeśli zezwolisz użytkownikowi na zmianę obecności doku, poprzednie ustawienie zostanie wymuszone dla początkowego wdrożenia. W przypadku kolejnych wdrożeń ustawienie nie będzie wymuszane w celu przestrzegania zmian wprowadzonych przez użytkownika. To ustawienie jest dostępne tylko w przypadku skonfigurowania obecności doku.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Zezwalaj użytkownikowi na zmianę obecności doku",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Dok to menu, które umożliwia użytkownikom urządzenia szybki dostęp do ich aplikacji i narzędzi. Gdy jest on ukryty, użytkownicy muszą szybko przesunąć w górę, aby uzyskać do niego dostęp.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Obecność paska ulubionych",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Jeśli zezwolisz użytkownikowi na włączanie/wyłączanie źródła danych, poprzednie ustawienie zostanie wymuszone dla początkowego wdrożenia. W przypadku kolejnych wdrożeń ustawienie nie będzie wymuszane w celu przestrzegania zmian wprowadzonych przez użytkownika. To ustawienie jest dostępne tylko po włączeniu źródła danych uruchamiania.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Zezwalaj użytkownikowi na włączanie/wyłączanie źródła danych",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Źródło danych to dodatkowy ekran po prawej stronie ekranu głównego, w którym użytkownicy urządzeń mogą uzyskiwać dostęp do swoich kalendarzy, dokumentów i ostatnich działań. Jeśli nie zostanie włączony, pozostanie wyłączony. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Włącz kanał modułu uruchamiania",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Położenie paska wyszukiwania",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "U dołu",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Ukryj",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "U góry",
+ "deviceExperienceTypeName": "Typ środowiska urządzenia",
"deviceGuardCredentialGuardDescription": "Włączenie z blokadą UEFI zapewnia, że nie można zdalnie wyłączyć funkcji Credential Guard. Włączenie bez blokady UEFI umożliwia zdalne wyłączenie funkcji Credential Guard za pośrednictwem zasad grupy.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Identyfikator urządzenia usługi Intune",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Liczba dni, po których nastąpi przejście z planowanego automatycznego ponownego uruchamiania poza godzinami pracy do ponownego uruchamiania wymagającego interwencji użytkownika, co wymaga od użytkownika zmiany harmonogramu.",
"engagedRestartTransitionScheduleName": "Przenieś użytkowników do ponownego uruchamiania wymagającego interwencji użytkownika po automatycznym ponownym uruchomieniu (w dniach)",
"enhancedOption": "Rozszerzona (1903 i starsze)",
- "enrollmentProfileTypeDedicatedDevice": "Dedykowane urządzenie",
- "enrollmentProfileTypeDescription": "Wybierz typ profilu rejestracji, aby rozpocząć konfigurowanie aplikacji Microsoft Launcher lub Zarządzany Ekran Główny firmy Microsoft na swoich urządzeniach. Jeśli nie wybierzesz typu profilu, użytkownicy zobaczą domyślny ekran główny urządzenia.",
- "enrollmentProfileTypeFullyManaged": "W pełni zarządzane",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Skonfiguruj aplikację Microsoft Launcher na swoich w pełni zarządzanych urządzeniach.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Użyj aplikacji Microsoft Launcher, aby dostosować ekran główny na urządzeniach zarządzanych przez organizację. Jeśli ustawisz aplikację Launcher jako domyślną, użytkownicy urządzenia nie będą mogli korzystać z innego modułu uruchamiania.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Ustaw aplikację Microsoft Launcher jako domyślny moduł uruchamiania",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Zezwalaj użytkownikowi na modyfikowanie tapety",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Umożliwia zastosowanie własnego obrazu jako tapety ekranu głównego i wybranie, czy użytkownik może ją zmienić. Jeśli nie skonfigurujesz tapety niestandardowej, urządzenie zachowa swoją bieżącą tapetę.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Konfiguruj tapetę niestandardową",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Ten obraz będzie widoczny jako tapeta na ekranie głównym urządzenia. To pole jest dostępne tylko w przypadku skonfigurowania tapety niestandardowej.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Wprowadź adres URL obrazu tapety",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Wyłączone",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Ukryj",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Pokaż",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Dok to menu, które umożliwia użytkownikom urządzenia szybki dostęp do ich aplikacji i narzędzi. Gdy jest on ukryty, użytkownicy muszą szybko przesunąć w górę, aby uzyskać do niego dostęp.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Obecność doku",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Zezwalaj użytkownikowi na włączanie/wyłączanie źródła danych",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Źródło danych to dodatkowy ekran po prawej stronie ekranu głównego, w którym użytkownicy urządzeń mogą uzyskiwać dostęp do swoich kalendarzy, dokumentów i ostatnich działań. Jeśli nie zostanie włączony, pozostanie wyłączony. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Włącz źródło danych uruchamiania",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Położenie paska wyszukiwania",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Dolny",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Ukryj",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Do góry",
- "enrollmentProfileTypeName": "Typ profilu rejestracji",
"enrollmentSettingsHeading": "Ustawienia rejestracji",
"enterOnlyOneForDns": "Wprowadź listę serwerów DNS i/lub serwer proxy.",
"enterpriseModeLoggingExample": "np. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Urządzenia z profilem służbowym w pełni zarządzane i należące do firmy",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Te ustawienia działają tylko w przypadku urządzeń w pełni zarządzanych i dedykowanych.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "W pełni zarządzane i dedykowane urządzenia",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Te ustawienia działają tylko w przypadku w pełni zarządzanych i dedykowanych urządzeń działających z zasadami kiosku.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "W pełni zarządzane i dedykowane urządzenia (tylko tryb kiosku)",
"gameCenterBlockedMacDescription": "Tak, wyłącza Game Center, a ikona Game Center jest usuwana z ekranu głównego. Dostępne dla urządzeń z systemem macOS w wersji 10.13 lub nowszej.",
"gameCenterBlockedMacName": "Blokuj usługę Game Center",
"gamingPageDescription": "Zablokuj dostęp do obszaru Gry w aplikacji Ustawienia.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Konfiguruje typ logowania w celu uzyskania dostępu do aplikacji na tym urządzeniu kiosku.",
"kioskShowTaskbarDesc": "Pokaż lub ukryj pasek zadań systemu Windows w kiosku.",
"kioskShowTaskbarName": "Pasek zadań systemu Windows",
+ "kioskSingleInfoBoxText": "Tryb kiosku z jedną aplikacją — blokuje urządzenie w celu uruchomienia wybranej aplikacji. Aby używać tego trybu, musisz najpierw zatwierdzić i przypisać wybraną aplikację z obciążenia aplikacji klienckich. Na w pełni zarządzanych urządzeniach jedyną wybraną aplikacją, która zostanie zastosowana, jest Zarządzany Ekran Główny. Z kolei wszystkie inne aplikacje będą traktowane jako wymagana aplikacja.",
"kioskStartDateTime": "Czas rozpoczęcia okna obsługi",
"kioskStartMenuLayoutXmlDesc": "Podaj układ XML określający, w jakiej kolejności aplikacje powinny być wyświetlane w menu Start",
"kioskStartMenuLayoutXmlDescV2": "Zaimportowanie pliku XML konfigurującego układ ekranu startowego przesłoni istniejące wybory dotyczące kolejności wyświetlania i rozmiaru kafelków. Dowiedz się więcej",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Musi być prawidłową ścieżką do pliku",
"mustBeAValidHttpsUrl": "Musi być poprawnym adresem url https",
"mustBeAValidIPAddress": "Musi być prawidłowym adresem IP (np. 192.168.0.1 lub 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Wartość musi być prawidłowym adresem IP lub nazwą FQDN z opcjonalnym numerem portu.",
"mustBeAValidIPv4Address": "Musi to być prawidłowy adres IPv4 (np. 192.168.0.1)",
"mustBeAValidIPv6Address": "Musi być prawidłowym adresem IPv6 (np. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Musi być prawidłowym adresem URL obrazu, takim jak www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Reguły zapory systemu Windows z magazynu lokalnego (sieci publiczne)",
"publicNetworkName": "Sieć publiczna (niewykrywalna)",
"publicOutboundConnectionsSummaryLabel": "Domyślna akcja dla połączeń wychodzących (sieci publiczne)",
- "publicPlayStoreEnabledDescription": "Użytkownicy mogą uzyskiwać dostęp do wszystkich aplikacji, z wyjątkiem tych, których odinstalowanie jest wymagane w aplikacjach klienckich. Jeśli dla tego ustawienia wybierzesz opcję „Nie skonfigurowano”, użytkownicy będą mogli uzyskiwać dostęp tylko do aplikacji wymienionych jako dostępne lub wymagane w aplikacjach klienckich.",
+ "publicPlayStoreEnabledDescription": "Jeśli wybierzesz opcję „Zezwalaj”, użytkownicy uzyskają dostęp do wszystkich aplikacji, z wyjątkiem tych, które są wymagane do odinstalowania w aplikacjach klienckich. Jeśli dla tego ustawienia wybierzesz opcję „Blokuj” lub „Nie skonfigurowano”, użytkownicy będą mogli uzyskiwać dostęp tylko do aplikacji wymienionych jako dostępne lub wymagane w aplikacjach klienckich.",
"publicPlayStoreEnabledName": "Zezwalaj na dostęp do wszystkich aplikacji w sklepie Google Play",
- "publicPlayStoreEnabledWarning": "Jeśli wybierzesz pozycję „Zezwalaj”, użytkownicy mogą instalować dowolne aplikacje ze sklepu Google Play. Jeśli później zmienisz zaznaczenie na „Nieskonfigurowane”, wszystkie aplikacje, które nie są wyraźnie dozwolone dla użytkownika, zostaną usunięte z urządzenia.",
+ "publicPlayStoreEnabledWarning": "Jeśli wybierzesz pozycję „Zezwalaj”, użytkownicy będą mogli instalować dowolne aplikacje ze sklepu Google Play. Jeśli później zmienisz wybór na „Blokuj” lub „Nie skonfigurowano”, wszystkie aplikacje zostaną usunięte z urządzenia, z wyjątkiem aplikacji wymienionych jako dostępne lub wymagane w aplikacjach klienckich.",
+ "publicPlayStoreSelectionAllowList": "Blokuj",
+ "publicPlayStoreSelectionBlockList": "Zezwalaj",
+ "publicPlayStoreSelectionNotConfigured": "Nieskonfigurowane",
"publicShieldedSummaryLabel": "Z osłoną (sieci publiczne)",
"publicStealthModeSummaryLabel": "Tryb niewidzialności (sieci publiczne)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Odpowiedzi emisji pojedynczej na multiemisję (sieci publiczne)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Trwa usuwanie...",
"photoLibrary": "Biblioteka zdjęć",
"pinCharSettingTooltip": "Numer PIN może zawierać tylko cyfry.\r\n\r\nKod dostępu musi zawierać znaki alfanumeryczne i dozwolone symbole.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Ważne: Od 1 czerwca 2024 r. aplikacje z pakietem zestawu SDK starszym niż 17.7.0 nie będą już otrzymywać aktualizacji zasad ochrony aplikacji, a użytkownicy nie będą mogli uruchomić aplikacji. Upewnij się, że użytkownicy aktualizują swoje aplikacje, a Twoje aplikacje biznesowe korzystają z najnowszego zestawu SDK lub otoki. Dowiedz się więcej",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Platforma",
"platformDropDownLabel": "Platforma",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Urządzenie",
"licenseTypeUser": "Użytkownik"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Właściwość",
- "rule": "Reguła",
- "ruleDetails": "Szczegóły reguły",
- "value": "Wartość"
- },
- "assignIf": "Przypisz profil, jeżeli",
- "deleteWarning": "Spowoduje to usunięcie wybranej reguły stosowania",
- "dontAssignIf": "Nie przypisuj profilu, jeżeli",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "i {0} więcej",
- "instructions": "Określ sposób stosowania tego profilu w przypisanej grupie. Usługa Intune zastosuje profil tylko do urządzeń, które spełniają połączone kryteria tych reguł.",
- "maxText": "Maksymalna",
- "minText": "Minimalna",
- "noActionRow": "Nie określono reguł stosowania",
- "oSVersion": "np. 1.2.3.4",
- "toText": "do",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home (Chiny)",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home — pojedynczy język",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "Wersja systemu operacyjnego",
- "windows10OsVersion": "Wersja systemu operacyjnego",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Stacja robocza z systemem Windows 10/11 Professional",
- "windows10ProfessionalWorkstationN": "Stacja robocza N systemu Windows 10/11 Professional",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Równa się",
- "greaterThan": "Większe niż",
- "greaterThanOrEqualTo": "Większe niż lub równe",
- "lessThan": "Mniej niż",
- "lessThanOrEqualTo": "Mniejsze niż lub równe",
- "notEqualTo": "Różne od"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Wymuś sprawdzanie podpisu skryptu i uruchom skrypt w trybie cichym",
- "enforceSignatureCheckTooltip": "Wybierz opcję „Tak”, aby sprawdzić, czy skrypt jest podpisany przez zaufanego wydawcę, co pozwoli na uruchomienie skryptu bez wyświetlania ostrzeżeń ani monitów. Działanie skryptu nie będzie blokowane. Wybierz opcję „Nie” (domyślna), aby uruchomienie skryptu wymagało potwierdzenia użytkownika końcowego. Weryfikacja podpisu nie będzie wykonywana.",
- "header": "Użyj niestandardowego skryptu wykrywania",
- "runAs32Bit": "Uruchom skrypt jako proces 32-bitowy na klientach 64-bitowych",
- "runAs32BitTooltip": "Wybierz opcję „Tak”, aby uruchomić skrypt w procesie 32-bitowym na klientach 64-bitowych. Wybierz opcję „Nie” (domyślna), aby uruchomić skrypt w procesie 64-bitowym na klientach 64-bitowych. Na klientach 32-bitowych skrypt jest uruchamiany w procesie 32-bitowym.",
- "scriptContent": "Zawartość skryptu",
- "scriptFile": "Plik skryptu",
- "scriptFileNotSelectedValidation": "Nie wybrano pliku skryptu.",
- "scriptFileTooltip": "Wybierz skrypt programu PowerShell, który będzie wykrywać obecność aplikacji na kliencie. Aplikacja zostanie wykryta, gdy skrypt zwróci kod zakończenia o wartości 0 i zapisze wartość ciągu w wyjściu STDOUT.",
- "scriptSizeLimitValidation": "Rozmiar skryptu wykrywania przekracza maksymalny dozwolony rozmiar. Rozwiąż ten problem, zmniejszając rozmiar skryptu wykrywania."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Data utworzenia",
- "dateModified": "Data modyfikacji",
- "doesNotExist": "Plik lub folder nie istnieje",
- "fileOrFolderExists": "Plik lub folder istnieje",
- "sizeInMB": "Rozmiar w MB",
- "version": "Ciąg (wersja)"
- },
- "associatedWith32Bit": "Skojarzone z aplikacją 32-bitową na klientach 64-bitowych",
- "associatedWith32BitTooltip": "Wybierz opcję „Tak”, aby rozwijać zmienne środowiskowe ścieżki w kontekście 32-bitowym na klientach 64-bitowych. Wybierz opcję „Nie” (domyślna), aby rozwijać wszelkie zmienne ścieżki w kontekście 64-bitowym na klientach 64-bitowych. Klienci 32-bitowi będą zawsze korzystać z kontekstu 32-bitowego.",
- "detectionMethod": "Metoda wykrywania",
- "detectionMethodTooltip": "Wybierz typ metody wykrywania używanej do weryfikacji obecności aplikacji.",
- "fileOrFolder": "Plik lub folder",
- "fileOrFolderToolTip": "Plik lub folder do wykrycia.",
- "operator": "Operator",
- "operatorTooltip": "Wybierz operator dla metody wykrywania używanej w celu weryfikacji porównania.",
- "path": "Ścieżka",
- "pathTooltip": "Pełna ścieżka folderu zawierającego plik lub folder do wykrycia.",
- "value": "Wartość",
- "valueTooltip": "Wybierz wartość, która jest zgodna z wybraną metodą wykrywania. W przypadku metod wykrywania opartych na dacie należy wprowadzić datę w czasie lokalnym."
- },
- "GridColumns": {
- "pathOrCode": "Ścieżka/kod",
- "type": "Typ"
- },
- "MsiRule": {
- "operator": "Operator",
- "operatorTooltip": "Wybierz operator porównania weryfikacji wersji produktu MSI.",
- "productCode": "Kod produktu MSI",
- "productCodeTooltip": "Prawidłowy kod produktu MSI dla aplikacji.",
- "productVersion": "Wartość",
- "productVersionCheck": "Sprawdzenie wersji produktu MSI",
- "productVersionCheckTooltip": "Wybierz opcję „Tak”, aby weryfikować nie tylko kod produktu MSI, ale także wersję produktu.",
- "productVersionTooltip": "Wprowadź wersję produktu MSI dla aplikacji."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Porównanie liczb całkowitych",
- "keyDoesNotExist": "Klucz nie istnieje",
- "keyExists": "Klucz istnieje",
- "stringComparison": "Porównanie ciągów",
- "valueDoesNotExist": "Wartość nie istnieje",
- "valueExists": "Wartość istnieje",
- "versionComparison": "Porównanie wersji"
- },
- "associatedWith32Bit": "Skojarzone z aplikacją 32-bitową na klientach 64-bitowych",
- "associatedWith32BitTooltip": "Wybierz opcję „Tak”, aby przeszukiwać rejestr 32-bitowy na klientach 64-bitowych. Wybierz opcję „Nie” (domyślna), aby przeszukiwać rejestr 64-bitowy na klientach 64-bitowych. Klienci 32-bitowi zawsze będą przeszukiwać rejestr 32-bitowy.",
- "detectionMethod": "Metoda wykrywania",
- "detectionMethodTooltip": "Wybierz typ metody wykrywania używanej do weryfikacji obecności aplikacji.",
- "keyPath": "Ścieżka klucza",
- "keyPathTooltip": "Pełna ścieżka wpisu rejestru zawierającego wartość do wykrycia.",
- "operator": "Operator",
- "operatorTooltip": "Wybierz operator dla metody wykrywania używanej w celu weryfikacji porównania.",
- "value": "Wartość",
- "valueName": "Nazwa wartości",
- "valueNameTooltip": "Nazwa wartości rejestru do wykrycia.",
- "valueTooltip": "Wybierz wartość, która jest zgodna z wybraną metodą wykrywania."
- },
- "RuleTypeOptions": {
- "file": "Plik",
- "mSI": "MSI",
- "registry": "Rejestr"
- },
- "gridAriaLabel": "Reguły wykrywania",
- "header": "Utwórz regułę wskazującą obecność aplikacji.",
- "noRulesSelectedPlaceholder": "Nie określono żadnych reguł.",
- "ruleTableLimit": "Możesz dodać maksymalnie 25 reguł wykrywania",
- "ruleType": "Typ reguły",
- "ruleTypeTooltip": "Wybierz typ reguły wykrywania do dodania."
- },
- "RuleConfigurationOptions": {
- "customScript": "Użyj niestandardowego skryptu wykrywania",
- "manual": "Ręcznie skonfiguruj reguły wykrywania"
- },
- "bladeTitle": "Reguły wykrywania",
- "header": "Skonfiguruj reguły specyficzne dla aplikacji używane do wykrywania obecności aplikacji.",
- "rulesFormat": "Format reguł",
- "rulesFormatTooltip": "Wybierz opcję ręcznego skonfigurowania reguł wykrywania lub zastosuj skrypt niestandardowy, aby wykryć obecność aplikacji.",
- "selectorLabel": "Reguły wykrywania"
+ "BooleanActions": {
+ "allow": "Zezwalaj",
+ "block": "Blokuj",
+ "configured": "Skonfigurowane",
+ "disable": "Wyłącz",
+ "dontRequire": "Nie wymagaj",
+ "enable": "Włącz",
+ "hide": "Ukryj",
+ "limit": "Limit",
+ "notConfigured": "Nieskonfigurowane",
+ "require": "Wymagaj",
+ "show": "Pokaż",
+ "yes": "Tak"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Ustawienia SmartScreen zalecane przez aplikację Microsoft Edge: szablon konfiguracji systemu Windows 10 w chmurze. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Wykrywanie i reagowanie dotyczące punktów końcowych"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "Izolacja aplikacji i przeglądarki",
- "aSRApplicationControl": "Kontrola aplikacji",
- "aSRAttackSurfaceReduction": "Reguły zmniejszania obszaru podatnego na ataki",
- "aSRDeviceControl": "Kontrola urządzeń",
- "aSRExploitProtection": "Ochrona przed programami wykorzystującymi luki w zabezpieczeniach",
- "aSRWebProtection": "Ochrona w Internecie (starsza wersja Microsoft Edge)",
- "aVExclusions": "Wykluczenia programu Microsoft Defender Antivirus",
- "antivirus": "Program antywirusowy Microsoft Defender",
- "cloudPC": "Plan bazowy zabezpieczeń systemu Windows 365",
- "default": "Zabezpieczenia punktu końcowego",
- "defenderTest": "Wersja demonstracyjna usługi Microsoft Defender for Endpoint",
- "diskEncryption": "BitLocker",
- "eDR": "Wykrywanie i reagowanie dotyczące punktów końcowych",
- "edgeSecurityBaseline": "Punkt odniesienia programu Microsoft Edge",
- "edgeSecurityBaselinePreview": "Wersja zapoznawcza: punkt odniesienia programu Microsoft Edge",
- "editionUpgradeConfiguration": "Uaktualnianie wersji i przełączanie trybu",
- "firewall": "Zapora systemu Windows",
- "firewallRules": "Reguły zapory systemu Windows",
- "identityProtection": "Ochrona konta",
- "identityProtectionPreview": "Ochrona konta (wersja zapoznawcza)",
- "mDMSecurityBaseline1810": "Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych z października 2018 r.",
- "mDMSecurityBaseline1810Preview": "Wersja zapoznawcza: Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych z października 2018 r.",
- "mDMSecurityBaseline1810PreviewBeta": "Wersja zapoznawcza: plan bazowy zabezpieczeń MDM dla systemu Windows 10 z października 2018 r. (wersja beta)",
- "mDMSecurityBaseline1906": "Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych z maja 2019 r.",
- "mDMSecurityBaseline2004": "Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych wersji z sierpnia 2020 r.",
- "mDMSecurityBaseline2101": "Plan bazowy zabezpieczeń MDM dla systemu Windows 10 i nowszych wersji z grudnia 2020 r.",
- "macOSAntivirus": "Oprogramowanie antywirusowe",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "Zapora systemu macOS",
- "microsoftDefenderBaseline": "Punkt odniesienia usługi Microsoft Defender for Endpoint",
- "office365Baseline": "Punkt odniesienia dla usługi Microsoft Office O365",
- "office365BaselinePreview": "Podgląd: punkt odniesienia dla usługi Microsoft Office O365",
- "securityBaselines": "Punkty odniesienia zabezpieczeń",
- "test": "Testuj szablon",
- "testFirewallRulesSecurityTemplateName": "Reguły zapory systemu Windows (test)",
- "testIdentityProtectionSecurityTemplateName": "Ochrona konta (test)",
- "windowsSecurityExperience": "Środowisko zabezpieczeń systemu Windows"
- },
- "Firewall": {
- "mDE": "Zapora systemu Windows"
- },
- "FirewallRules": {
- "mDE": "Reguły zapory systemu Windows"
- },
- "OneDriveKnownFolderMove": {
- "description": "Ustawienia przenoszenia znanych folderów usługi OneDrive: Windows 10 w szablonie konfiguracji chmury. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Ochrona konta",
- "administrativeTemplates": "Szablony administracyjne",
- "androidCompliancePolicy": "Zasady dotyczące zgodności dla systemu Android",
- "aospDeviceOwnerCompliancePolicy": "Zasady zgodności dla systemu Android (AOSP)",
- "applicationControl": "Kontrola aplikacji dla biznesu",
- "attackSurfaceReductionRules": "Reguły zmniejszenia obszaru ataków",
- "bitlocker": "BitLocker",
- "custom": "Niestandardowe",
- "deliveryOptimization": "Optymalizacja dostarczania",
- "derivedPersonalIdentityVerificationCredential": "Pochodne poświadczenia",
- "deviceControl": "Kontrola urządzenia",
- "deviceFeatures": "Funkcje urządzenia",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Blokada urządzenia",
- "deviceOwner": "Profil służbowy w pełni zarządzany, dedykowany i należący do firmy",
- "deviceRestrictions": "Ograniczenia dotyczące urządzeń",
- "deviceRestrictionsWindows10Team": "Ograniczenia dotyczące urządzeń (Windows 10 Team)",
- "domainJoinPreview": "Przyłączanie do domeny",
- "editionUpgradeAndModeSwitch": "Uaktualnianie wersji i przełączanie trybu",
- "education": "Edukacja",
- "email": "Wiadomość e-mail",
- "emailSamsungKnoxOnly": "Poczta e-mail (tylko rozwiązanie Samsung KNOX)",
- "endpointProtection": "Ochrona punktu końcowego",
- "expeditedCheckin": "Konfiguracja zarządzania urządzeniami przenośnymi",
- "exploitProtection": "Exploit Protection",
- "extensions": "Rozszerzenia",
- "hardwareConfigurations": "Konfiguracje systemu BIOS i inny ustawień",
- "identityProtection": "Identity Protection",
- "iosCompliancePolicy": "Zasady dotyczące zgodności dla systemu iOS",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Członkostwo użytkownika lokalnego w grupie",
- "macCompliancePolicy": "Zasady dotyczące zgodności dla komputerów Mac",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Aplikacje Microsoft 365 dla planu bazowego zabezpieczeń przedsiębiorstwa",
- "microsoftDefenderAntivirus": "Program antywirusowy Microsoft Defender",
- "microsoftDefenderAntivirusexclusions": "Wykluczenia programu Microsoft Defender Antivirus",
- "microsoftDefenderAtpWindows10Desktop": "Ochrona punktu końcowego w usłudze Microsoft Defender (urządzenia stacjonarne z systemem Windows 10 lub nowszym)",
- "microsoftDefenderFirewallRules": "Reguły zapory systemu Windows",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Plan bazowy zabezpieczeń dla przeglądarki Microsoft Edge",
- "mxProfileZebraOnly": "Profil MX (tylko Zebra)",
- "networkBoundary": "Granica sieci",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Przesłoń zasady grupy",
- "pkcsCertificate": "Certyfikat PKCS",
- "pkcsImportedCertificate": "Zaimportowany certyfikat PKCS",
- "preferenceFile": "Plik preferencji",
- "presets": "Ustawienia wstępne",
- "scepCertificate": "Certyfikat SCEP",
- "secureAssessmentEducation": "Bezpieczna ocena (edukacja)",
- "securityBaselineForHololens2Advanced": "Zaawansowany punkt odniesienia zabezpieczeń dla HoloLens 2",
- "securityBaselineForHololens2Standard": "Standardowy punkt odniesienia zabezpieczeń dla HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Plan bazowy zabezpieczeń dla przeglądarki Microsoft Edge",
- "settingsCatalog": "Katalog ustawień",
- "sharedMultiUserDevice": "Udostępnione urządzenie obsługujące wielu użytkowników",
- "softwareUpdates": "Aktualizacje oprogramowania",
- "trustedCertificate": "Certyfikat zaufany",
- "unknown": "Nieznany",
- "unsupported": "Nieobsługiwane",
- "vpn": "Sieć VPN",
- "wiFi": "Sieć Wi-Fi",
- "wiFiImport": "Importowanie sieci Wi-Fi",
- "windows10CompliancePolicy": "Zasady zgodności systemu Windows 10/11",
- "windows10MobileCompliancePolicy": "Zasady dotyczące zgodności dla systemu Windows 10 Mobile",
- "windows10XScep": "Certyfikat SCEP — TEST",
- "windows10XTrustedCertificate": "Zaufany certyfikat — TEST",
- "windows10XVPN": "VPN — TEST",
- "windows10XWifi": "WIFI — TEST",
- "windows11SecurityBaseline": "Punkt odniesienia zabezpieczeń dla systemu Windows 10 i nowszego",
- "windows365SecurityBaseline": "Plan bazowy zabezpieczeń systemu Windows 365",
- "windows8CompliancePolicy": "Zasady dotyczące zgodności dla systemu Windows 8",
- "windowsHealthMonitoring": "Monitorowanie kondycji systemu Windows",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Zasady dotyczące zgodności dla systemu Windows Phone",
- "windowsUpdateforBusiness": "Windows Update dla Firm",
- "wiredNetwork": "Sieć przewodowa",
- "workProfile": "Osobisty profil służbowy"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Stopniowo udostępniaj aktualizację",
- "immediateStart": "Udostępnij aktualizację tak szybko, jak to możliwe",
- "startDateOnly": "Udostępnij aktualizację w określonym dniu"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Urządzenia zarządzane",
- "devicesWithoutEnrollment": "Aplikacje zarządzane"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filtruj",
- "assignmentFilterTypeColumnHeader": "Tryb filtru",
- "assignmentToast": "Powiadomienia użytkownika końcowego",
- "assignmentTypeTableHeader": "TYP PRZYPISANIA",
- "autoUpdate": "Automatyczna aktualizacja",
- "deadlineTimeColumnLabel": "Ostateczny termin instalacji",
- "deliveryOptimizationPriorityHeader": "Priorytet optymalizacji dostarczania",
- "groupTableHeader": "Grupa",
- "installContextLabel": "Kontekst instalacji",
- "isRemovable": "Zainstaluj jako wymienne",
- "licenseTypeLabel": "Typ licencji",
- "modeTableHeader": "Tryb grupy",
- "policySet": "Zestaw zasad",
- "preventAutoAppUpdate": "Zapobiegaj automatycznym aktualizacjom aplikacji",
- "preventManagedAppBackup": "Zapobiegaj wykonywaniu kopii zapasowej aplikacji iCloud",
- "restartGracePeriodHeader": "Okres prolongaty ponownego uruchomienia",
- "startTimeColumnLabel": "Dostępność",
- "tracks": "Ścieżki",
- "uninstallOnRemoval": "Odinstaluj podczas usuwania urządzenia",
- "updateMode": "Aktualizuj priorytet",
- "vPN": "Sieć VPN"
- },
- "AppType": {
- "aADWebApp": "Aplikacja internetowa usługi AAD",
- "androidEnterpriseSystemApp": "Aplikacja systemu Android Enterprise",
- "androidForWorkApp": "Aplikacja zarządzanego sklepu Google Play",
- "androidLobApp": "Aplikacja biznesowa dla systemu Android",
- "androidStoreApp": "Aplikacja w sklepie dla systemu Android",
- "builtInAndroid": "Wbudowana aplikacja systemu Android",
- "builtInApp": "Aplikacja wbudowana",
- "builtInIos": "Wbudowana aplikacja systemu iOS",
- "iosIPadOSWebClip": "Klip internetowy z systemem iOS/iPadOS",
- "iosLobApp": "Aplikacja biznesowa dla systemu iOS",
- "iosStoreApp": "Aplikacja w sklepie dla systemu iOS",
- "iosVppApp": "Aplikacja nabyta w programie zakupów zbiorczych dla systemu iOS",
- "lineOfBusinessApp": "Aplikacja biznesowa",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Aplikacja biznesowa systemu macOS",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Pakiet Office dla systemu macOS",
- "macOSPkgApp": "Aplikacja systemu macOS (PKG)",
- "macOSWebClip": "Klip internetowy dla systemu macOS",
- "macOsVppApp": "Aplikacja nabyta w programie zakupów zbiorczych dla systemu macOS",
- "managedAndroidLobApp": "Zarządzana aplikacja biznesowa dla systemu Android",
- "managedAndroidStoreApp": "Zarządzana aplikacja w sklepie dla systemu Android",
- "managedGooglePlayApp": "Aplikacja zarządzanego sklepu Google Play",
- "managedGooglePlayPrivateApp": "Prywatna aplikacja zarządzanej usługi Google Play",
- "managedGooglePlayWebApp": "Link internetowy do zarządzanej usługi Google Play",
- "managedIosLobApp": "Zarządzana aplikacja biznesowa dla systemu iOS",
- "managedIosStoreApp": "Zarządzana aplikacja w sklepie dla systemu iOS",
- "microsoftStoreForBusinessApp": "Aplikacja ze sklepu Microsoft Store dla Firm",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store dla Firm",
- "officeAddIn": "Dodatek pakietu Office",
- "officeSuiteApp": "Aplikacje Microsoft 365 (Windows 10 i nowszy)",
- "sharePointApp": "Aplikacja programu SharePoint",
- "teamsApp": "Aplikacja Teams",
- "webApp": "Link sieci Web",
- "win32CatalogApp": "Aplikacja katalogowa systemu Windows (Win32)",
- "winGetPublicApp": "Repozytorium społeczności Menedżera pakietów systemu Windows",
- "winGetStoreApp": "Aplikacja sklepu Microsoft Store (nowa)",
- "windowsAppXLobApp": "Aplikacja biznesowa AppX systemu Windows",
- "windowsClassicApp": "Aplikacja systemu Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (system Windows 10 i nowszy)",
- "windowsMobileMsiLobApp": "Aplikacja biznesowa MSI systemu Windows",
- "windowsPhone81AppXBundleLobApp": "Aplikacja biznesowa AppX systemu Windows Phone 8.1",
- "windowsPhone81AppXLobApp": "Aplikacja biznesowa AppX systemu Windows Phone 8.1",
- "windowsPhone81StoreApp": "Aplikacja ze Sklepu Windows Phone 8.1",
- "windowsPhoneXapLobApp": "Aplikacja biznesowa XAP systemu Windows Phone",
- "windowsStoreApp": "Aplikacja sklepu Microsoft Store (starsza wersja)",
- "windowsUniversalAppXLobApp": "Uniwersalna aplikacja biznesowa AppX systemu Windows",
- "windowsUniversalLobApp": "Uniwersalna aplikacja biznesowa systemu Windows",
- "windowsWebApp": "Link sieci Web systemu Windows"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Sieć Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Wykluczone",
- "include": "Dołączone",
- "includeAllDevicesVirtualGroup": "Dołączone",
- "includeAllUsersVirtualGroup": "Dołączone"
- },
- "AssignmentToast": {
- "hideAll": "Ukryj wszystkie wyskakujące powiadomienia",
- "showAll": "Pokaż wszystkie wyskakujące powiadomienia",
- "showReboot": "Pokaż wyskakujące powiadomienia dotyczące ponownego uruchomienia komputera"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Tak",
- "notConfigured": "Nie"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Tło",
- "displayText": "Pobieranie zawartości za {0}",
- "foreground": "Pierwszy plan",
- "header": "Priorytet optymalizacji dostarczania"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "Instalacja aplikacji może wymusić ponowne uruchomienie urządzenia",
- "basedOnReturnCode": "Określ zachowanie na podstawie kodów powrotnych",
- "force": "Usługa Intune wymusi obowiązkowe ponowne uruchomienie urządzenia",
- "suppress": "Brak określonej akcji"
- },
- "FilterType": {
- "exclude": "Wyklucz",
- "include": "Dołącz",
- "none": "Brak"
- },
- "InstallIntent": {
- "available": "Dostępne dla zarejestrowanych urządzeń",
- "availableWithoutEnrollment": "Dostępne z rejestracją lub bez niej",
- "notApplicable": "Nie dotyczy",
- "required": "Wymagane",
- "uninstall": "Odinstaluj"
- },
- "SettingType": {
- "assignmentType": "Typ przypisania",
- "deviceLicensing": "Typ licencji",
- "installContext": "Odinstaluj podczas usuwania urządzenia",
- "toastSettings": "Powiadomienia użytkownika końcowego",
- "vpnConfiguration": "Sieć VPN"
- },
- "UpdateMode": {
- "default": "Domyślny",
- "postponed": "Odłożone",
- "priority": "Wysoki priorytet"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Skonfiguruj urządzenia na potrzeby wstępnej aprowizacji.",
- "title": "Przygotowywanie urządzenia"
- },
- "EnrollmentSettings": {
- "description": "Skonfiguruj ustawienia rejestracji, takie jak blokowanie rejestracji i przypisywanie do użytkowników.",
- "title": "Ustawienia rejestracji"
- },
- "OSConfiguration": {
- "menuDescription": "Skonfiguruj ustawienia, których użytkownicy mogą używać do odzyskiwania systemu Windows z rozruchowego dysku flash.",
- "menuTitle": "Konfiguracja odzyskiwania systemu operacyjnego Windows"
- },
- "coManagementAuthorityDesc": "Konfiguruj ustawienia współzarządzania na potrzeby integracji z programem Configuration Manager",
- "coManagementAuthorityTitle": "Ustawienia współzarządzania ",
- "deploymentProfiles": "Profile wdrażania rozwiązania Windows Autopilot",
- "description": "Poznaj siedem różnych sposobów rejestrowania komputera z systemem Windows 10/11 w usłudze Intune przez użytkowników lub administratorów.",
- "descriptionLabel": "Metody rejestracji w systemie Windows",
- "enrollmentStatusPage": "Strona ze stanem rejestracji"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Automatyczne zatwierdzanie wszystkich zalecanych aktualizacji sterowników",
- "manual": "Ręczne zatwierdzanie i wdrażanie aktualizacji sterowników"
- },
- "BulkActions": {
- "button": "Akcje zbiorcze"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Metoda zatwierdzania:"
- },
- "DeploymentDeferralInDays": {
- "label": "Wykonywanie aktualizacji udostępnianych później",
- "units": "(dni)",
- "value": "{0} dni"
- },
- "DriverAction": {
- "header": "Wybierz akcję poniżej.",
- "label": "Akcja sterownika",
- "placeholder": "Wybierz akcję"
- },
- "IncludedDrivers": {
- "label": "Dołączone sterowniki"
- },
- "SelectDrivers": {
- "header": "Wybierz sterowniki do uwzględnienia w akcji zbiorczej"
- },
- "SelectDriversToInclude": {
- "button": "Wybierz sterowniki do uwzględnienia"
- },
- "SelectLessDrivers": {
- "validation": "Można wybrać maksymalnie sto sterowników"
- },
- "SelectMoreDrivers": {
- "validation": "Należy wybrać co najmniej jeden sterownik"
- },
- "SelectedDrivers": {
- "label": "Wybrane sterowniki:"
- },
- "availabilityDate": "Udostępnij w usłudze Windows Update",
- "bladeTitle": "Aktualizacje sterowników dla systemu Windows 10 i nowszych (wersja zapoznawcza)",
- "lastSync": "Ostatnia synchronizacja:",
- "lastSyncDefaultText": "Oczekiwanie na początkowe zbieranie spisów",
- "loadError": "Ładowanie nie powiodło się!"
- },
- "DriverStatus": {
- "approved": "Zatwierdzone",
- "declined": "Odrzucone",
- "export": "Eksportowanie zalecanych sterowników",
- "needsReview": "Wymaga przeglądu",
- "paused": "Wstrzymane"
- },
- "DriversToReview": {
- "text": "{0} do przeglądu"
- },
- "Subtitle": {
- "automatic": "Zasady automatycznego zatwierdzania aktualizacji sterowników",
- "manual": "Zasady ręcznego zatwierdzania aktualizacji sterowników"
- },
- "SyncNotification": {
- "failure": "Nie można zsynchronizować {0}",
- "failureDescription": "Wystąpił błąd i nie można ukończyć żądanej synchronizacji. Spróbuj ponownie.",
- "pending": "Synchronizacja {0} w toku",
- "pendingDescription": "Pobieramy najnowsze dane. Ten proces może potrwać kilka minut.",
- "success": "Ukończono synchronizację {0} ",
- "successDescription": "Synchronizacja z usługą WUfB zakończyła się o godzinie {0}"
- },
- "SyncSpinner": {
- "text": "Synchronizacja jest w toku. Może to potrwać kilka minut. Poszukaj alertu lub sprawdź ponownie za kilka minut."
- },
- "TabName": {
- "basics": "Podstawowe informacje",
- "driverUpdateSettings": "Ustawienia",
- "otherDrivers": "Inne sterowniki",
- "properties": "Właściwości",
- "recommendedDrivers": "Zalecane sterowniki"
- },
- "driverAddFilter": "Dodaj filtr",
- "driverApplicableDevices": "Odpowiednie urządzenia",
- "driverApprovalStatus": "Stan",
- "driverBulkActions": "Akcje zbiorcze",
- "driverClass": "Klasa sterownika",
- "driverCount": "Pokazywanie od {0} do {1} z {2} rekordów",
- "driverFilterNoneSelected": "Nic nie wybrano",
- "driverManufacturer": "Producent",
- "driverName": "Nazwa sterownika",
- "driverNameLower": "wdrożenie aktualizacji sterowników systemu windows",
- "driverNameUpper": "wdrożenie aktualizacji sterowników systemu Windows",
- "driverRefresh": "Odśwież",
- "driverReleaseDate": "Data wydania",
- "driverSearch": "Wyszukiwanie",
- "driverSearchKeyword": "Wprowadź słowo kluczowe wyszukiwania",
- "driverVersion": "Wersja",
- "firstDeploymentDate": "Pierwsze wdrożenie",
- "infoBoxText": "Wypełnienie spisu może potrwać do 24 godzin po przypisaniu i utworzeniu zasad.",
- "textBlockText": "Wybierz ustawienia zatwierdzenia i wdrażania zasad. Wybierz, aby skonfigurować zasady do zatwierdzania i wdrażania aktualizacji automatycznie lub ręcznie. Nie można zmienić metody zatwierdzania po utworzeniu zasad, ale wprowadzenie zmiany w szczegółowych informacjach dotyczących indywidualnych zatwierdzeń i wdrożeń sterowników będzie możliwe po utworzeniu spisu dla przypisanych urządzeń."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Te ustawienia służą do uzyskiwania informacji o użytkownikach instalujących aplikacje, które nie zostały zatwierdzone do użycia w firmie. Wybierz typ listy ograniczonych aplikacji:
\r\n Aplikacje zabronione — otrzymasz powiadomienie, jeśli jakiś użytkownik zainstaluje aplikację z tej listy. \r\n Zatwierdzone aplikacje — lista aplikacji, które zostały zatwierdzone do użycia w firmie. Otrzymasz powiadomienie, jeśli jakiś użytkownik zainstaluje aplikację spoza tej listy. \r\n ",
- "androidZebraMxZebraMx": "Konfiguruj urządzenia Zebra, przekazując profil MX w formacie XML.",
- "iosDeviceFeaturesAirprint": "Użyj tych ustawień do skonfigurowania urządzeń z systemem iOS, aby automatycznie nawiązywały połączenie z drukarkami obsługującymi funkcję AirPrint w sieci. Wymagane będą adresy IP i ścieżki zasobów drukarek.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Skonfiguruj rozszerzenie aplikacji, które umożliwia logowanie jednokrotne dla urządzeń z systemem iOS 13.0 lub nowszym.",
- "iosDeviceFeaturesHomeScreenLayout": "Skonfiguruj układ Docka i ekranów głównych na urządzeniach z systemem iOS. Niektóre urządzenia mogą mieć ograniczenia liczby wyświetlanych elementów.",
- "iosDeviceFeaturesIOSWallpaper": "Wyświetl obraz widoczny na ekranie głównym i/lub na ekranie blokady urządzeń z systemem iOS.\r\n Aby wyświetlać unikatowy obraz w każdym z tych miejsc, utwórz profil z obrazem dla ekranu blokady oraz profil z obrazem dla ekranu głównego.\r\n Następnie przypisz oba profile użytkownikom.\r\n \r\n
\r\n
Maksymalny rozmiar pliku: 750 KB
\r\n
Typ pliku: PNG, JPG lub JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Określ ustawienia powiadomień dla aplikacji. Obsługuje system iOS 9.3 i nowsze.",
- "iosDeviceFeaturesSharedDevice": "Określ opcjonalny tekst wyświetlany na zablokowanym ekranie. Jest on obsługiwany w systemie iOS 9.3 i nowszych. Dowiedz się więcej",
- "iosGeneralApplicationRestrictions": "Te ustawienia służą do uzyskiwania informacji o użytkownikach instalujących aplikacje, które nie zostały zatwierdzone do użycia w firmie. Wybierz typ listy ograniczonych aplikacji:
\r\n Aplikacje zabronione — otrzymasz powiadomienie, jeśli jakiś użytkownik zainstaluje aplikację z tej listy. \r\n Zatwierdzone aplikacje — lista aplikacji, które zostały zatwierdzone do użycia w firmie. Otrzymasz powiadomienie, jeśli jakiś użytkownik zainstaluje aplikację spoza tej listy. \r\n ",
- "iosGeneralApplicationVisibility": "Użyj listy pokazywanych aplikacji, aby określić aplikacje dla systemu iOS, które mogą być wyświetlane lub uruchamiane przez użytkownika. Użyj listy ukrytych aplikacji, aby określić aplikacje dla systemu iOS, które nie mogą być wyświetlane ani uruchamiane przez użytkownika.",
- "iosGeneralAutonomousSingleAppMode": "Aplikacje dodane do tej listy i przypisane do urządzenia mogą blokować urządzenie w celu przetwarzania tylko tej aplikacji po jej uruchomieniu lub blokować urządzenie podczas wykonywania określonej akcji (na przykład rozwiązywania testu). Po wykonaniu akcji lub usunięciu ograniczenia urządzenie powraca do normalnego stanu.",
- "iosGeneralKiosk": "Tryb kiosku blokuje różne ustawienia urządzenia lub określa pojedynczą aplikację, którą można uruchomić na urządzeniu. Może to być przydatne w środowiskach, takich jak sklep, w którym na urządzeniu ma być uruchamiana tylko jedna aplikacja demonstracyjna.",
- "macDeviceFeaturesAirprint": "Użyj tych ustawień do skonfigurowania urządzeń z systemem macOS w celu automatycznego nawiązywania połączenia ze zgodnymi drukarkami AirPrint znajdującymi się w sieci. Konieczna będzie znajomość adresów IP i ścieżek zasobów drukarek.",
- "macDeviceFeaturesAssociatedDomains": "Skonfiguruj skojarzone domeny, aby udostępniać dane i poświadczenia logowania między aplikacjami i witrynami organizacji. Ten profil można zastosować do urządzeń z systemem macOS 10.15 lub nowszym.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Skonfiguruj rozszerzenie aplikacji, które umożliwia logowanie jednokrotne (SSO) dla urządzeń z systemem macOS 10.15 lub nowszym.",
- "macDeviceFeaturesLoginItems": "Wybierz aplikacje, pliki i foldery, które mają być otwierane po zalogowaniu się użytkownika na urządzeniach. Jeśli chcesz zablokować użytkownikom możliwość zmiany sposobu otwierania aplikacji, możesz ukryć aplikację w konfiguracji użytkownika.",
- "macDeviceFeaturesLoginWindow": "Skonfiguruj wygląd ekranu logowania systemu macOS oraz funkcje dostępne dla użytkowników przed i po zalogowaniu.",
- "macExtensionsKernelExtensions": "Te ustawienia służą do konfigurowania zasad rozszerzeń jądra na urządzeniach z systemem macOS 10.13.2 lub nowszym.",
- "macGeneralDomains": "Wiadomości e-mail wysyłane lub odbierane przez użytkownika, które nie pasują do domen określonych w tym miejscu, będą oznaczone jako niezaufane.",
- "windows10EndpointProtectionApplicationGuard": "Podczas korzystania z przeglądarki Microsoft Edge funkcja Microsoft Defender Application Guard chroni Twoje środowisko przed witrynami, które nie zostały zdefiniowane jako zaufane przez Twoją organizację. Gdy użytkownicy odwiedzają witryny, które nie są wymienione w granicach izolowanej sieci, te witryny zostaną otwarte w wirtualnej sesji przeglądania w funkcji Hyper-V. Zaufane lokacje są definiowane przez granicę sieci, którą można ustawić w konfiguracji urządzenia. Ta funkcja jest dostępna tylko dla urządzeń z 64-bitowym systemem Windows 10 lub nowszym.",
- "windows10EndpointProtectionCredentialGuard": "Włączenie funkcji Credential Guard spowoduje włączenie następujących ustawień wymaganych:\r\n \r\n
\r\n
Włącz zabezpieczenia oparte na wirtualizacji: włącza zabezpieczenia oparte na wirtualizacji (VBS) podczas następnego ponownego uruchomienia. Zabezpieczenia oparte na wirtualizacji używają funkcji hypervisor systemu Windows w celu zapewnienia obsługi usług zabezpieczeń.
\r\n \r\n
Bezpieczny rozruch z bezpośrednim dostępem do pamięci: włącza zabezpieczenia VBS z funkcją bezpiecznego rozruchu i bezpośrednim dostępem do pamięci (DMA).
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Wybierz dodatkowe aplikacje, dla których należy przeprowadzić inspekcję lub które są zaufane do uruchamiania za pomocą Kontroli aplikacji usługi Microsoft Defender. Składniki systemu Windows i wszystkie aplikacje ze Sklepu Windows są automatycznie zaufane do uruchamiania.
\r\n Aplikacje nie będą blokowane podczas uruchamiania w trybie „tylko inspekcja”. W trybie „tylko inspekcja” wszystkie zdarzenia są rejestrowane w dziennikach klienta lokalnego.\r\n ",
- "windows10GeneralPrivacyPerApp": "Dodaj aplikacje, dla których chcesz określić inne zachowanie dotyczące prywatności niż zachowanie zdefiniowane w domyślnym ustawieniu prywatności.",
- "windows10NetworkBoundaryNetworkBoundary": "Granica sieci to lista zasobów przedsiębiorstwa, takich jak domena hostowana w chmurze i zakresy adresów IP komputerów znajdujących się w sieci przedsiębiorstwa. Określ granice sieci, aby stosować zasady i chronić dane przechowywane w tych lokalizacjach.",
- "windowsHealthMonitoring": "Skonfiguruj zasady monitorowania kondycji systemu Windows.",
- "windowsPhoneGeneralApplicationRestrictions": "W systemie Windows Phone można zablokować możliwość instalowania lub uruchamiania przez użytkowników aplikacji określonych na liście zabronionych aplikacji lub aplikacji nieznajdujących się na liście zatwierdzonych aplikacji. Wszystkie zarządzane aplikacje muszą zostać dodane do listy zatwierdzonych aplikacji."
- },
- "Inputs": {
- "accountDomain": "Domena konta",
- "accountDomainHint": "np. contosodomain",
- "accountDomainInfoBalloon": "Określ domenę konta użytkownika.",
- "accountTypeInfoBalloon": "Określ typ konfigurowanego konta na podstawie modelu uwierzytelniania",
- "allowContactSetting": "Zezwalaj użytkownikowi na zmianę ustawienia kontaktów",
- "allowContactSyncInfoBalloon": "Określ, czy użytkownik może zmieniać ustawienie synchronizacji kontaktów",
- "allowUserChange": "Zezwalaj użytkownikowi na zmianę ustawienia",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Wprowadź nazwę pakietu podobną do com.microsoft.word",
- "androidUrlValidation": "Wprowadź prawidłowy adres URL podobny do następującego: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "Kontekst instalacji aplikacji",
- "appUrlLabel": "Adres URL sklepu App Store",
- "appleUrlValidation": "Wprowadź prawidłowy adres URL podobny do https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Odpowiedni typ urządzenia",
- "assignmentActionLabel": "Tryb",
- "authenticationMethodInfoBalloon": "Określ metodę uwierzytelniania dla użytkownika",
- "authenticationMetod": "Metoda uwierzytelniania",
- "authenticationType": "Typ uwierzytelniania",
- "authenticationTypeInfoBalloon": "Określ typ uwierzytelniania dla użytkownika",
- "availableLicenseCount": "Dostępne licencje",
- "basicAuth": "Uwierzytelnianie podstawowe",
- "biometricsInfoBalloon": "Biometria (np. funkcja TouchID lub FaceID) może być wymagana, aby użytkownicy mogli otwierać aplikację na swoich urządzeniach. Gdy biometria jest wymagana, jest używana obok metod uwierzytelniania wybranych w tym profilu. To ustawienie nie powinno być włączone, gdy zostały wdrożone zasady ochrony aplikacji usługi Intune, ponieważ zasady ochrony aplikacji obejmują wymagania w zakresie dostępu przed uzyskaniem dostępu do danych zarządzanych. Włączenie obu opcji będzie skutkować wieloma monitami o dostęp przy otwieraniu aplikacji Outlook Mobile. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
- "bookNameLabel": "Nazwa książki",
- "bundleDescriptionHint": "Wprowadź opis, który opisuje uwzględnione aplikacje.",
- "calendar": "Kalendarz",
- "categoryLabel": "Kategoria",
- "categoryNameLabel": "Domyślna nazwa",
- "certProfileType": "Typ profilu certyfikatu",
- "certificate": "Certyfikat",
- "certificates": "Certyfikaty",
- "commandLineLabel": "Argumenty wiersza polecenia",
- "commandLineSizeHint": "Maksymalna długość tekstu argumentów wiersza polecenia to 1024 znaki",
- "configurationSettingsFormatLabel": "Format ustawień konfiguracji",
- "configurationSettingsLabel": "Format ustawień",
- "contactSync": "Zapisz kontakty",
- "contactSyncInfoBalloon": "Zapisywanie kontaktów w natywnej książce adresowej urządzenia przenośnego pozwala na łączenie nowych rozmów i wiadomości SMS z istniejącymi kontaktami użytkownika w programie Outlook. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone.",
- "contacts": "Kontakty",
- "createdDateTime": "Utworzono",
- "defaultCategoryHint": "Kategorii domyślnych nie można zmienić",
- "deploySMimeCertsFromIntune": "Wdróż certyfikaty S/MIME z usługi Intune",
- "descriptionGenericLabel": "Opis",
- "descriptionHint": "Wprowadź opis...",
- "descriptionLabel": "Opis",
- "descriptionSizeHint": "Długość opisu nie powinna przekraczać 10 000 znaków",
- "developerLabel": "Deweloper",
- "developerSizeHint": "Maksymalna długość nazwy dewelopera to 256 znaków.",
- "disable": "Wyłącz",
- "disabled": "Wyłączone",
- "displayNameLabel": "Nazwa",
- "displayVersionHint": "Wprowadź wersję aplikacji",
- "displayVersionLabel": "Wersja aplikacji",
- "displayVersionLengthCheck": "Długość wersji wyświetlanej powinna wynosić maksymalnie 130 znaków",
- "eBookCategoryNameLabel": "Domyślna nazwa",
- "emailAccount": "Nazwa konta e-mail",
- "emailAccountHint": "np. firmowy adres e-mail",
- "emailAccountInfoBalloon": "Określ nazwę konta e-mail, która będzie wyświetlana dla użytkowników na ich urządzeniach",
- "emailAddressAttribute": "Atrybut adresu e-mail z Microsoft Entra ID",
- "emailAddressInfoBalloon": "Określ adres e-mail, który będzie używany do wysyłania i odbierania poczty",
- "emailServer": "Serwer poczty e-mail",
- "emailServerHint": "np. mail.contoso.com",
- "emailServerInfoBalloon": "Określ nazwę hosta programu Exchange Server",
- "enable": "Włącz",
- "enableSMime": "Włącz protokół S/MIME",
- "enabled": "Włączony",
- "encryptAllEmails": "Szyfruj wszystkie wiadomości e-mail",
- "encryptionCertificates": "Certyfikaty szyfrowania",
- "endUserNotifications": "Powiadomienia użytkowników końcowych",
- "enrollmentTypeLabel": "Typ rejestracji urządzenia",
- "externalRecipients": "Porada dotycząca poczty dla adresatów zewnętrznych",
- "externalRecipientsInfoBalloon": "Porady dotyczące poczty dla adresatów zewnętrznych są wyświetlane, gdy nadawca dodaje adresata zewnętrznego lub grupę dystrybucji zawierającą adresatów zewnętrznych. Porada dotycząca poczty informuje nadawców, że pisana wiadomość wyjdzie poza organizację, co pomaga im w dobraniu właściwego słownictwa, stylu i zawartości. Funkcja ta jest dostępna tylko dla kont usługi Exchange Online i kont lokalnych korzystających z nowoczesnego uwierzytelniania hybrydowego. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Włączone.",
- "focusedInbox": "Priorytetowa skrzynka odbiorcza",
- "focusedInboxInfoBalloon": "Priorytetowa skrzynka odbiorcza dzieli skrzynkę odbiorczą na dwie karty — Priorytetowe i Inne. Najważniejsze wiadomości e-mail są widoczne na karcie Priorytetowe, a pozostałe wiadomości, chociaż usunięte z głównego widoku, są nadal łatwo dostępne na karcie Inne. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, domyślnym ustawieniem w aplikacji jest Włączone.",
- "fullScreenEnabledLabel": "Tryb pełnoekranowy",
- "gmailNineAmountOfEmail": "Liczba wiadomości e-mail do synchronizacji",
- "gmailNineAuthenticationMethodInfoBalloon": "Wybierz, w jaki sposób użytkownicy mają być uwierzytelniani na serwerze poczty e-mail. Za pomocą certyfikatów możesz zapewnić użytkownikom końcowym najbezpieczniejsze i najbardziej bezproblemowe środowisko. Uwierzytelnianie oparte na certyfikacie nie jest jeszcze dostępne, ponieważ profile certyfikatów SCEP i PKCS dla urządzeń właścicieli urządzeń są niedostępne.",
- "gmailNineCertificateUPNInfoBalloon": "Certyfikat musi mieć alternatywną nazwę podmiotu w postaci głównej nazwy użytkownika (UPN).",
- "gmailNineEmailAddressInfoBalloon": "Atrybut, który usługa Intune uzyskuje z Microsoft Entra ID w celu dynamicznego generowania adresu e-mail, który będzie używany przez profil, np. MyName@contoso.com (UPN). Dowiedz się więcej na temat atrybutów Microsoft Entra dla profilów adresu e-mail.",
- "gmailNineEmailServerInfoBalloon": "Lokalizacja usługi Exchange (adres URL) serwera poczty e-mail, z którą łączy się określona aplikacja w celu pobrania poczty e-mail.",
- "gmailNineEmailSynchronizeInfoBalloon": "Kontroluj liczbę wiadomości e-mail synchronizowanych przez klienta.",
- "gmailNineSSLInfoBalloon": "Włącz protokół SSL, aby zabezpieczyć komunikację z serwerem poczty e-mail.",
- "gmailNineUsernameInfoBalloon": "Atrybut, który usługa Intune uzyskuje z Microsoft Entra ID w celu dynamicznego generowania nazwy użytkownika, która będzie używana przez profil, np. MyName@contoso.com (UPN) lub or MyName (username). Dowiedz się więcej na temat atrybutów Microsoft Entra dla profilów adresu e-mail.",
- "ignoreManifestScope": "Ignoruj zakres manifestu",
- "ignoreVersionDetection": "Ignoruj wersję aplikacji",
- "informationUrlLabel": "Adres URL informacji",
- "informationUrlSizeHint": "Maksymalna długość adresu URL informacji to 1024 znaki",
- "installAsManaged": "Instaluj jako zarządzaną",
- "installationSourceLabel": "Typ aplikacji",
- "installerTypeInfoBalloon": "Typ instalatora pakietu aplikacji.",
- "installerTypeLabel": "Typ instalatora",
- "isFeatured": "Pokaż jako polecaną aplikację w Portalu firmy",
- "isMAMEnabledToggleLabel": "Tak",
- "lastModifiedDateTime": "Godzina ostatniej aktualizacji",
- "ldapUrl": "Adres URL LDAP",
- "licensingType": "Obsługuje przypisanie kontekstu urządzenia",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimalna wersja systemu operacyjnego",
- "modernAuth": "Nowoczesne uwierzytelnianie",
- "nameHint": "Wprowadź nazwę",
- "nameLabel": "Nazwa",
- "nameSizeHint": "Maksymalna długość nazwy to 512 znaków.",
- "notConfigured": "Nie skonfigurowano",
- "notesLabel": "Uwagi",
- "notesSizeHint": "Maksymalna długość tekstu notatki to 1024 znaki.",
- "notificationType": "Typ powiadomienia",
- "oneDay": "Jeden dzień",
- "oneMonth": "Jeden miesiąc",
- "oneWeek": "Jeden tydzień",
- "outlookSMimeSettings": "Ustawienia S/MIME programu Outlook",
- "ownerLabel": "Właściciel",
- "ownerSizeHint": "Maksymalna długość nazwy właściciela to 256 znaków.",
- "packageIdLabel": "Identyfikator pakietu",
- "packageNameLabel": "Nazwa pakietu",
- "pivCredentialNotConfigured": "Nie wybrano wystawcy pochodnych poświadczeń dla dzierżawy. Musisz skonfigurować wystawcę, zanim będzie można pomyślnie zastosować te zasady do urządzeń.",
- "platformLabel": "Platforma",
- "policyDescriptionLabel": "Opis",
- "policyNameLabel": "Nazwa",
- "preComposedIconEnabled": "Wstępnie skompilowane",
- "primarySMTPAddress": "Podstawowy adres SMTP",
- "privacyUrlLabel": "Adres URL dotyczący ochrony prywatności",
- "publisherHint": "Wprowadź nazwę wydawcy",
- "publisherLabel": "Wydawca",
- "publisherSizeHint": "Długość nazwy wydawcy powinna należeć do zakresu od 2 do 1024 znaków (włącznie)",
- "require": "Wymagaj",
- "requireBiometrics": "Wymagaj informacji biometrycznych na potrzeby dostępu do aplikacji",
- "sAMAccountName": "Nazwa konta SAM",
- "scopeTagsRequired": "Wymagany jest co najmniej jeden tag zakresu",
- "searchAppLabel": "Wybierz aplikację",
- "searchAppLinkText": "Wyszukaj w sklepie App Store",
- "searchWinGetPublicRepositoryLinkText": "Przeszukaj repozytorium społeczności Menedżera pakietów systemu Windows",
- "searchWinGetStoreRepositoryLinkText": "Wyszukaj w aplikacji sklepu Microsoft Store (nowa)",
- "selectAAD": "Wybierz atrybut Microsoft Entra",
- "selectAppFileLabel": "Wybierz plik",
- "selectAppFileLinkText": "Wybierz plik pakietu aplikacji",
- "selectAppFileToUpdateLabel": "Wybierz plik do zaktualizowania",
- "selectAuthMethod": "Wybierz metodę uwierzytelniania",
- "selectAuthType": "Wybierz typ uwierzytelniania",
- "selectCatalogAppLabel": "Wybierz aplikację",
- "selectCatalogAppLinkText": "Wyszukaj w wykazie aplikacji dla przedsiębiorstw",
- "selectCertificate": "Wybierz certyfikat",
- "signAllEmails": "Podpisuj wszystkie wiadomości e-mail",
- "signingCertificates": "Certyfikaty podpisywania",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Opis pakietu",
- "suiteNameLabel": "Nazwa pakietu",
- "targetApplicationBundleIdentifier": "Identyfikator pakietu aplikacji docelowej",
- "targetedPlatformsLabel": "Platforma docelowa",
- "tasks": "Zadania",
- "threeDays": "Trzy dni",
- "totalLicenseCount": "Łączna liczba licencji",
- "twoWeeks": "Dwa tygodnie",
- "unifiedAssignmentsLabel": "Przypisz do:",
- "unlimited": "Nieograniczone",
- "urlHint": "Wprowadź prawidłowy adres URL",
- "useManagedBrowserHint": "Tylko systemy Android i iOS. Dowiedz się więcej",
- "useManagedBrowserLabel": "Wymagaj zarządzanej przeglądarki do otworzenia tego linku",
- "userPrinicipalName": "Nazwa główna użytkownika",
- "username": "Nazwa użytkownika",
- "usernameAttribute": "Atrybut nazwy użytkownika z Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Określ główną nazwę użytkownika dla profilu poczty e-mail, która będzie używana do uwierzytelniania konta",
- "usernamePassword": "Nazwa użytkownika i hasło",
- "webAppUrlHint": "Wprowadź prawidłowy adres URL zaczynający się od http:// lub https://",
- "webAppUrlLabel": "Adres URL aplikacji",
- "webAppUrlSizeHint": "Maksymalna długość adresu URL aplikacji to 1024 znaków",
- "windowsUrlValidation": "Podaj prawidłowy adres URL podobny do https://www.microsoft.com/pl-pl/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "Wprowadzone dane XML",
- "xmlFormatInvalid": "Format zasad XML jest nieprawidłowy.",
- "xmlTooLarge": "Rozmiar wejściowy musi być mniejszy niż 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Nie można usunąć aplikacji {0}",
- "failureCa": "Nie można usunąć {0} ponieważ jest przywoływany przez zasady urzędu certyfikacji",
- "modifying": "Usuwanie pliku {0}",
- "success": "Pomyślnie usunięto element {0}"
- },
- "Notify": {
- "failure": "Nie można zaktualizować elementu {0}",
- "modifying": "Modyfikowanie elementu {0}",
- "success": "Pomyślnie zaktualizowano element {0}"
- },
- "menuLabel": "Kontekst uwierzytelniania"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Dowiedz się więcej o wymaganiach metod uwierzytelniania spełnianych przez dostawców federacyjnych.",
- "certificate": "Uwierzytelnianie certyfikatów",
- "infoBubble": "Określ wymaganą metodę uwierzytelniania, która musi być stosowana przez dostawcę federacji, np. usługę ADFS.",
- "multifactor": "Uwierzytelnianie wieloskładnikowe",
- "require": "Wymagaj metody uwierzytelniania federacyjnego (wersja zapoznawcza)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Zasady trwałej sesji przeglądarki działają tylko wtedy, gdy wybrana jest opcja „Wszystkie aplikacje w chmurze”. Zaktualizuj wybór aplikacji w chmurze."
- },
- "Option": {
- "always": "Zawsze trwała",
- "help": "Trwała sesja przeglądarki umożliwia użytkownikom pozostanie zalogowanym po zamknięciu i ponownym otworzeniu okna przeglądarki \n
\n
To ustawienie działa prawidłowo, gdy wybrana jest opcja „Wszystkie aplikacje w chmurze”
\n
Nie ma to wpływu na okresy istnienia tokenów ani na ustawienie częstotliwości logowania.
\n
Spowoduje to przesłonięcie zasad „Wyświetlaj opcję zachowania stanu zalogowania” w znakowaniu firmowym.
\n
Opcja „Nigdy trwała” przesłoni wszelkie oświadczenia logowania jednokrotnego przekazane z federacyjnej usługi uwierzytelniania.
\n
Opcja „Nigdy trwała” uniemożliwi korzystanie z logowania jednokrotnego we wszystkich aplikacjach na urządzeniu oraz między aplikacjami a przeglądarką użytkownika dla urządzeń przenośnych.
\n",
- "label": "Trwała sesja przeglądarki",
- "never": "Nigdy trwała"
- },
- "Warning": {
- "allApps": "Trwała sesja przeglądarki działa tylko wtedy, gdy wybrana jest opcja Wszystkie aplikacje w chmurze. Zmień wybór aplikacji w chmurze. Kliknij tutaj, aby dowiedzieć się więcej."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Godziny lub dni",
- "value": "Częstotliwość"
- },
- "Option": {
- "Day": {
- "plural": "{0} dni",
- "singular": "1 dzień"
- },
- "Hour": {
- "plural": "{0} godz.",
- "singular": "1 godzina"
- },
- "daysOption": "Dni",
- "everytime": "Za każdym razem",
- "help": "Czas, po upłynięciu którego użytkownik będzie musiał ponownie się zalogować podczas próby uzyskania dostępu do zasobu. Ustawieniem domyślnym jest kroczący przedział czasu wynoszący 90 dni, tzn. użytkownicy będą musieli się ponownie uwierzytelnić podczas pierwszej próby uzyskania dostępu do zasobu po okresie nieaktywności wynoszącym 90 lub więcej dni.",
- "hoursOption": "Godziny",
- "label": "Częstotliwość logowania",
- "placeholder": "Wybierz jednostki"
- }
- },
- "mainOption": "Modyfikuj okres istnienia sesji",
- "mainOptionHelp": "Skonfiguruj, jak często użytkownikom będzie wyświetlany monit i czy sesje przeglądarki będą utrwalone. Aplikacje, które nie obsługują nowoczesnych protokołów uwierzytelniania, mogą nie honorować tych zasad. W takich przypadkach skontaktuj się z deweloperem aplikacji."
- },
- "SingleSelectorActive": {
- "failed": "Nie można załadować danych.",
- "reattempt": "Ładowanie danych. Ponawianie próby dla {0} z {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Wybierz role katalogu"
- },
- "Excluded": {
- "gridAria": "Lista wykluczonych użytkowników"
- },
- "Included": {
- "gridAria": "Lista uwzględnionych użytkowników"
- },
- "Validation": {
- "customRoleIncluded": "„Role katalogów” zawierają co najmniej jedną rolę niestandardową",
- "customRoleSelected": "Wybrano co najmniej jedną rolę niestandardową",
- "failed": "Opcja „{0}” musi być skonfigurowana",
- "roles": "Wybierz co najmniej jedną rolę",
- "usersGroups": "Wybierz co najmniej jednego użytkownika lub grupę"
- },
- "learnMore": "Kontroluj dostęp na podstawie tego, do kogo będą stosowane zasady, np. do użytkowników i grup, tożsamości obciążeń, ról katalogu lub gości zewnętrznych."
- },
- "advancedTabText": "Zaawansowane",
- "allCloudAppsErrorBox": "Opcja „Wszystkie aplikacje w chmurze” musi być wybrana, jeśli wybrane jest udzielenie „Wymagaj zmiany hasła”",
- "allCloudAppsReauth": "W przypadku wybrania kontroli sesji „Częstotliwość logowania za każdym razem” należy wybrać warunek „wszystkie aplikacje w chmurze” i „ryzyko logowania”",
- "allCloudOrSpecificApps": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga wybrania „wszystkich aplikacji w chmurze” lub specjalnie obsługiwanych aplikacji",
- "allDayCheckboxLabel": "Cały dzień",
- "allDevicePlatforms": "Dowolne urządzenie",
- "allGuestUserInfoContent": "Obejmuje gości usługi Microsoft Entra B2B, ale nie gości programu SharePoint B2B",
- "allGuestUserLabel": "Wszyscy goście i użytkownicy zewnętrzni",
- "allRiskLevelsOption": "Wszystkie poziomy ryzyka",
- "allTrustedLocationLabel": "Wszystkie zaufane lokalizacje",
- "allUserGroupSetSelectorLabel": "Wybrano wszystkich użytkowników i wszystkie grupy",
- "allUsersReauth": "Kontrola sesji „Częstotliwość logowania za każdym razem” wymaga wybrania opcji „Wszyscy użytkownicy”",
- "allUsersString": "Wszyscy użytkownicy",
- "and": "{0} I {1}",
- "andWithGrouping": "{0} I {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Dowolna aplikacja w chmurze",
- "appContextOptionInfoContent": "Żądany tag uwierzytelniania",
- "appContextOptionLabel": "Żądany tag uwierzytelniania (wersja zapoznawcza)",
- "appContextUriPlaceholder": "Przykład: uri:contoso.com:level3",
- "appEnforceInfoBubble": "Ograniczenia wymuszane przez aplikacje mogą wymagać dodatkowych czynności konfiguracyjnych administratora w ramach aplikacji w chmurze. Ograniczenia będą stosowane tylko dla nowych sesji.",
- "appNotSetSeletorLabel": "Nie wybrano żadnej aplikacji w chmurze",
- "appReauthNotSupported": "Ta aplikacja nie obsługuje kontroli sesji „częstotliwość logowania za każdym razem”.",
- "applyConditionClientAppInfoBalloonContent": "Konfiguruj aplikacje klienckie, aby do określonych z nich zastosować zasady",
- "applyConditionDevicePlatformInfoBalloonContent": "Konfiguruj platformy urządzeń, aby do określonych z nich zastosować zasady",
- "applyConditionDeviceStateInfoBalloonContent": "Skonfiguruj stany urządzeń, aby do określonych z nich zastosować zasady",
- "applyConditionLocationInfoBalloonContent": "Konfiguruj lokalizacje, aby zastosować zasady do zaufanych lub niezaufanych lokalizacji",
- "applyConditionSigninRiskInfoBalloonContent": "Konfiguruj ryzyko związane z logowaniem, aby zastosować zasady do określonych poziomów ryzyka",
- "applyConditionUserRiskInfoBalloonContent": "Konfiguruj ryzyko związane z użytkownikiem, aby zastosować zasady do określonych poziomów ryzyka",
- "applyConditonLabel": "Konfiguruj",
- "ariaLabelPolicyDisabled": "Zasady są wyłączone",
- "ariaLabelPolicyEnabled": "Zasady są włączone",
- "ariaLabelPolicyReportOnly": "Zasada jest w trybie samego raportu",
- "blockAccess": "Blokuj dostęp",
- "builtInDirectoryRoleLabel": "Wbudowane role katalogów",
- "casCustomControlInfo": "Zasady niestandardowe należy skonfigurować w portalu Cloud App Security. Ta kontrola działa natychmiast w przypadku polecanych aplikacji i może być samodzielnie aprowizowana dla dowolnej aplikacji. Kliknij tutaj, aby dowiedzieć się więcej o obu scenariuszach.",
- "casInfoBubble": "Ta kontrolka działa dla różnych aplikacji w chmurze.",
- "casPreconfiguredControlInfo": "Ta kontrola działa natychmiast w przypadku polecanych aplikacji i może być samodzielnie aprowizowana dla dowolnej aplikacji. Kliknij tutaj, aby dowiedzieć się więcej o obu scenariuszach.",
- "cert64DownloadCol": "Pobierz certyfikat base64",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Pobierz certyfikat",
- "certDurationCol": "Data wygaśnięcia",
- "certDurationStartCol": "Ważny od",
- "certName": "VpnCert",
- "certainApps": "Tylko specjalnie obsługiwane aplikacje są włączone dla opcji „Częstotliwość operacji logowania za każdym razem”, jeśli nie udzielono uprawnień „Wymagaj uwierzytelniania wieloskładnikowego” i „Wymagaj zmiany hasła”",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Wybierz aplikacje",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Wybrane aplikacje",
- "chooseApplicationsEmpty": "Brak aplikacji",
- "chooseApplicationsNone": "Brak",
- "chooseApplicationsNoneFound": "Nie można znaleźć „{0}”. Spróbuj użyć innej nazwy lub identyfikatora.",
- "chooseApplicationsPlural": "{0} i inne ({1})",
- "chooseApplicationsReAuthEverytimeInfo": "Szukasz aplikacji? Niektórych aplikacji nie można używać z kontrolą sesji „Wymagaj ponownego uwierzytelnienia — za każdym razem”",
- "chooseApplicationsRemove": "Usuń",
- "chooseApplicationsReturnedPlural": "Liczba znalezionych aplikacji: {0}",
- "chooseApplicationsReturnedSingular": "Znaleziono 1 aplikację",
- "chooseApplicationsSearchBalloon": "Wyszukaj aplikację, wprowadzając jej nazwę lub identyfikator.",
- "chooseApplicationsSearchHint": "Wyszukaj aplikacje...",
- "chooseApplicationsSearchLabel": "Aplikacje",
- "chooseApplicationsSearching": "Trwa wyszukiwanie...",
- "chooseApplicationsSelect": "Wybierz",
- "chooseApplicationsSelected": "Wybrane",
- "chooseApplicationsSingular": "{0} i jedna więcej",
- "chooseApplicationsTooMany": "Więcej wyników niż można wyświetlić. Filtruj przy użyciu pola wyszukiwania.",
- "chooseLocationCorpnetItem": "Sieć firmowa",
- "chooseLocationSelectedLocationsLabel": "Wybrane lokalizacje",
- "chooseLocationTrustedIpsItem": "Zaufane adresy IP z uwierzytelnianiem wieloskładnikowym",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Wybieranie lokalizacji",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Wybrane lokalizacje",
- "chooseLocationsEmpty": "Brak lokalizacji",
- "chooseLocationsExcludedSelectorTitle": "Wybierz",
- "chooseLocationsIncludedSelectorTitle": "Wybierz",
- "chooseLocationsNone": "Brak",
- "chooseLocationsNoneFound": "Nie można znaleźć „{0}”. Spróbuj użyć innej nazwy lub identyfikatora.",
- "chooseLocationsPlural": "{0} i inne ({1})",
- "chooseLocationsRemove": "Usuń",
- "chooseLocationsReturnedPlural": "Liczba odnalezionych lokalizacji: {0}",
- "chooseLocationsReturnedSingular": "Odnaleziono 1 lokalizację",
- "chooseLocationsSearchBalloon": "Wyszukaj lokalizację, wprowadzając jej nazwę.",
- "chooseLocationsSearchHint": "Wyszukaj lokalizacje...",
- "chooseLocationsSearchLabel": "Lokalizacje",
- "chooseLocationsSearching": "Trwa wyszukiwanie...",
- "chooseLocationsSelect": "Wybierz",
- "chooseLocationsSelected": "Wybrane",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Wybierz",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Wybierz",
- "chooseLocationsSingular": "{0} i jedna więcej",
- "chooseLocationsTooMany": "Więcej wyników niż można wyświetlić. Filtruj przy użyciu pola wyszukiwania.",
- "claimProviderAddCommandText": "Nowa kontrolka niestandardowa",
- "claimProviderAddNewBladeTitle": "Nowa kontrolka niestandardowa",
- "claimProviderDeleteCommand": "Usuń",
- "claimProviderDeleteDescription": "Czy na pewno chcesz usunąć „{0}”? Tej akcji nie można cofnąć.",
- "claimProviderDeleteTitle": "Czy na pewno?",
- "claimProviderEditInfoText": "Wprowadź dane w formacie JSON na potrzeby dostosowanych kontrolek udostępnionych przez dostawców oświadczeń.",
- "claimProviderNotificationCreateDescription": "Tworzenie kontrolki niestandardowej o nazwie „{0}”",
- "claimProviderNotificationCreateFailedDescription": "Utworzenie kontrolki niestandardowej „{0}” nie powiodło się. Spróbuj ponownie później.",
- "claimProviderNotificationCreateFailedTitle": "Nie można utworzyć kontrolki niestandardowej",
- "claimProviderNotificationCreateSuccessDescription": "Utworzono kontrolkę niestandardową o nazwie „{0}”",
- "claimProviderNotificationCreateSuccessTitle": "Utworzono sieć „{0}”",
- "claimProviderNotificationCreateTitle": "Tworzenie sieci „{0}”",
- "claimProviderNotificationDeleteDescription": "Usuwanie kontrolki niestandardowej o nazwie „{0}”",
- "claimProviderNotificationDeleteFailedDescription": "Usunięcie kontrolki niestandardowej „{0}” nie powiodło się. Spróbuj ponownie później.",
- "claimProviderNotificationDeleteFailedTitle": "Nie można usunąć kontrolki niestandardowej",
- "claimProviderNotificationDeleteSuccessDescription": "Usunięto kontrolkę niestandardową o nazwie „{0}”",
- "claimProviderNotificationDeleteSuccessTitle": "Usunięto sieć „{0}”",
- "claimProviderNotificationDeleteTitle": "Usuwanie znakowania „{0}”",
- "claimProviderNotificationUpdateDescription": "Aktualizowanie kontrolki niestandardowej o nazwie „{0}”",
- "claimProviderNotificationUpdateFailedDescription": "Zaktualizowanie kontrolki niestandardowej „{0}” nie powiodło się. Spróbuj ponownie później.",
- "claimProviderNotificationUpdateFailedTitle": "Nie można zaktualizować kontrolki niestandardowej",
- "claimProviderNotificationUpdateSuccessDescription": "Zaktualizowano kontrolkę niestandardową o nazwie „{0}”",
- "claimProviderNotificationUpdateSuccessTitle": "Zaktualizowano sieć „{0}”",
- "claimProviderNotificationUpdateTitle": "Aktualizowanie sieci „{0}”",
- "claimProviderValidationAppIdInvalid": "Wartość „AppId” jest nieprawidłowa. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationClientIdMissing": "W danych brakuje wartości „ClientId”. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationControlClaimsRequestedMissing": "W elemencie „Control” brakuje wartości „ClaimsRequested”. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "W elemencie „ClaimsRequested” brakuje wartości „Type”. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationControlIdAlreadyExists": "Wartość „Id” elementu „Control” już istnieje. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationControlIdMissing": "W elemencie „Control” brakuje wartości „Id”. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "Nie można usunąć wartości „Id” elementu „Control”, ponieważ istnieje do niej odwołanie w istniejących zasadach. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationControlIdTooManyControls": "Właściwość „Control” zawiera zbyt wiele kontrolek. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationControlIdValueReserved": "Wartość „Id” elementu „Control” jest zastrzeżonym słowem kluczowym. Użyj innego identyfikatora.",
- "claimProviderValidationControlNameAlreadyExists": "Wartość „Name” elementu „Control” już istnieje. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationControlNameMissing": "W elemencie „Control” brakuje wartości „Name”. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationControlsMissing": "W danych brakuje wartości „Controls”. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationDiscoveryUrlMissing": "W danych brakuje wartości „DiscoveryUrl”. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationInvalid": "Podane dane są nieprawidłowe. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationInvalidJsonDefinition": "Nie można zapisać kontrolki niestandardowej. Przejrzyj tekst w formacie JSON i spróbuj ponownie.",
- "claimProviderValidationNameAlreadyExists": "Wartość „Name” już istnieje. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationNameMissing": "W danych brakuje wartości „Name”. Sprawdź to i spróbuj ponownie.",
- "claimProviderValidationUnknown": "Wystąpił nieznany błąd podczas weryfikowania podanych danych. Sprawdź to i spróbuj ponownie.",
- "claimProvidersNone": "Brak kontrolek niestandardowych",
- "claimProvidersSearchPlaceholder": "Wyszukaj kontrolki.",
- "classicPoilcyFilterTitle": "Pokaż",
- "classicPolicyAllPlatforms": "Wszystkie platformy",
- "classicPolicyClientAppBrowserAndNative": "Przeglądarka, aplikacje mobilne i klienci komputerowi",
- "classicPolicyCloudAppTitle": "Aplikacja w chmurze",
- "classicPolicyControlAllow": "Zezwól",
- "classicPolicyControlBlock": "Blokuj",
- "classicPolicyControlBlockWhenNotAtWork": "Zablokuj dostęp poza pracą",
- "classicPolicyControlRequireCompliantDevice": "Wymagaj zgodnego urządzenia",
- "classicPolicyControlRequireDomainJoinedDevice": "Wymagaj urządzenia połączonego z domeną",
- "classicPolicyControlRequireMfa": "Wymagaj uwierzytelniania wieloskładnikowego",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Wymagaj uwierzytelniania wieloskładnikowego poza miejscem pracy",
- "classicPolicyDeleteCommand": "Usuń",
- "classicPolicyDeleteFailTitle": "Nie można usunąć zasad klasycznych",
- "classicPolicyDeleteInProgressTitle": "Usuwanie zasad klasycznych",
- "classicPolicyDeleteSuccessTitle": "Zasady klasyczne usunięte",
- "classicPolicyDetailBladeTitle": "Szczegóły",
- "classicPolicyDisableCommand": "Wyłącz",
- "classicPolicyDisableConfirmation": "Czy na pewno chcesz wyłączyć „{0}”? Tej akcji nie można cofnąć.",
- "classicPolicyDisableFailDescription": "Nie można wyłączyć zasad „{0}”",
- "classicPolicyDisableFailTitle": "Nie można wyłączyć zasad klasycznych",
- "classicPolicyDisableInProgressDescription": "Wyłączanie zasad „{0}”",
- "classicPolicyDisableInProgressTitle": "Wyłączanie zasad klasycznych",
- "classicPolicyDisableSuccessDescription": "Pomyślnie wyłączono zasady „{0}”",
- "classicPolicyDisableSuccessTitle": "Zasady klasyczne wyłączone",
- "classicPolicyEasSupportedPlatforms": "Obsługiwane platformy usługi Exchange ActiveSync",
- "classicPolicyEasUnsupportedPlatforms": "Nieobsługiwane platformy usługi Exchange ActiveSync",
- "classicPolicyExcludedPlatformsTitle": "Wykluczone platformy urządzeń",
- "classicPolicyFilterAll": "Wszystkie zasady",
- "classicPolicyFilterDisabled": "Wyłączone zasady",
- "classicPolicyFilterEnabled": "Włączone zasady",
- "classicPolicyIncludeExcludeMembersDescription": "Wykluczając grupy, można przeprowadzić stopniową migrację zasad.",
- "classicPolicyIncludeExcludeMembersTitle": "Uwzględnianie/wykluczanie grup",
- "classicPolicyIncludedPlatformsTitle": "Uwzględnione platformy sprzętowe",
- "classicPolicyManualMigrationMessage": "Te zasady muszą zostać zmigrowane ręcznie.",
- "classicPolicyMigrateCommand": "Migruj",
- "classicPolicyMigrateConfirmation": "Czy na pewno chcesz przeprowadzić migrację zasad „{0}”? Te zasady można migrować tylko raz.",
- "classicPolicyMigrateFailDescription": "Nie można migrować zasad „{0}”",
- "classicPolicyMigrateFailTitle": "Nie można przeprowadzić migracji zasad klasycznych",
- "classicPolicyMigrateInProgressDescription": "Migrowanie zasad „{0}”",
- "classicPolicyMigrateInProgressTitle": "Migrowanie zasad klasycznych",
- "classicPolicyMigrateRecommendText": "Zalecenie: wykonać migrację do zasad nowego portalu Azure.",
- "classicPolicyMigrateSuccessTitle": "Migracja zasad klasycznych zakończona powodzeniem",
- "classicPolicyMigratedSuccessDescription": "Tymi klasycznymi zasadami można teraz zarządzać w obszarze Zasady.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "Te zasady klasyczne są migrowane jako nowe zasady {0}. Nowymi zasadami można zarządzać w obszarze Zasady.",
- "classicPolicyNoEditPermissionMsg": "Nie masz uprawnień do edytowania tych zasad. Tylko administratorzy globalni i administratorzy zabezpieczeń mogą edytować zasady. Kliknij tutaj, aby uzyskać więcej informacji.",
- "classicPolicySaveFailDescription": "Nie można zapisać zasad „{0}”",
- "classicPolicySaveFailTitle": "Nie można zapisać zasad klasycznych",
- "classicPolicySaveInProgressDescription": "Zapisywanie zasad „{0}”",
- "classicPolicySaveInProgressTitle": "Zapisywanie zasad klasycznych",
- "classicPolicySaveSuccessDescription": "Pomyślnie zapisano zasady „{0}”",
- "classicPolicySaveSuccessTitle": "Zasady klasyczne zapisane",
- "clientAppBladeLegacyInfoBanner": "Starsza metoda uwierzytelniania nie jest obecnie obsługiwana",
- "clientAppBladeLegacyUpsellBanner": "Blokuj nieobsługiwane aplikacje klienckie (wersja zapoznawcza)",
- "clientAppBladeTitle": "Aplikacje klienckie",
- "clientAppDescription": "Wybierz aplikacje klienckie, do których zostaną zastosowane te zasady",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Program Exchange ActiveSync obecnie nie obsługuje wszystkich pozostałych warunków",
- "clientAppLearnMore": "Kontroluj dostęp użytkowników do konkretnych docelowych aplikacji klienckich, które nie używają nowoczesnego uwierzytelniania.",
- "clientAppLegacyHeader": "Klienci ze starszym uwierzytelnianiem",
- "clientAppMobileDesktop": "Aplikacje mobilne i klienci stacjonarni",
- "clientAppModernHeader": "Klienci z nowoczesnym uwierzytelnianiem",
- "clientAppOnlySupportedPlatforms": "Zastosuj zasady tylko do obsługiwanych platform",
- "clientAppSelectSpecificClientApps": "Wybierz aplikacje klienckie",
- "clientAppWebBrowser": "Przeglądarka",
- "clientAppsSelectedLabel": "Włączono: {0}",
- "clientTypeBrowser": "Przeglądarka",
- "clientTypeEas": "Klienci programu Exchange ActiveSync",
- "clientTypeEasInfo": "Tylko klienci Exchange ActiveSync używający starszego uwierzytelniania.",
- "clientTypeModernAuth": "Nowocześni klienci uwierzytelniania",
- "clientTypeOtherClients": "Inni klienci",
- "clientTypeOtherClientsInfo": "Obejmuje to starszych klientów pakietu Office oraz inne protokoły pocztowe (POP, IMAP, SMTP itp.). [Dowiedz się więcej][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "Z katalogu usunięto aplikacje w chmurze ({0}) skonfigurowane w ramach tych zasad, ale nie ma to wpływu na inne aplikacje w zasadach. Przy następnej aktualizacji sekcji aplikacji zasad usunięte aplikacje zostaną automatycznie z niej skasowane.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Wszystkie aplikacje firmy Microsoft",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Zezwalaj na aplikacje w chmurze, klasyczne i mobilne firmy Microsoft (wersja zapoznawcza)",
- "cloudappsSelectionBladeAllCloudapps": "Wszystkie aplikacje w chmurze",
- "cloudappsSelectionBladeExcludeDescription": "Wybierz aplikacje w chmurze, które zostaną wykluczone z zasad",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Wybierz wykluczone aplikacje w chmurze",
- "cloudappsSelectionBladeIncludeDescription": "Wybierz aplikacje w chmurze, do których będą mieć zastosowanie te zasady",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Wybierz",
- "cloudappsSelectionBladeSelectedCloudapps": "Wybierz aplikacje",
- "cloudappsSelectorInfoBallonText": "Usługi, do których użytkownik uzyskuje dostęp w celu wykonania pracy. Na przykład „Salesforce”",
- "cloudappsSelectorPluralExcluded": "Wykluczone aplikacje: {0}",
- "cloudappsSelectorPluralIncluded": "Uwzględnione aplikacje: {0}",
- "cloudappsSelectorSingularExcluded": "Wykluczono 1 aplikację",
- "cloudappsSelectorSingularIncluded": "Uwzględniono 1 aplikację",
- "cloudappsSelectorUserPlural": "Aplikacje: {0}",
- "cloudappsSelectorUserSingular": "1 aplikacja",
- "conditionLabelMulti": "Wybrane warunki: {0}",
- "conditionLabelOne": "Wybrano 1 warunek",
- "conditionalAccessBladeTitle": "Dostęp warunkowy",
- "conditionsNotSelectedLabel": "Nie skonfigurowano",
- "conditionsReqMfaReauthSet": "Niektóre opcje są niedostępne z powodu udzielenia uprawnienia „Wymagaj uwierzytelniania wieloskładnikowego” i aktualnie wybrano kontrolkę sesji „Częstotliwość operacji logowania za każdym razem”",
- "conditionsReqPwSet": "Niektóre opcje są niedostępne z powodu udzielenia „Wymagaj zmiany hasła”, które jest obecnie wybrane",
- "configureCasText": "Skonfiguruj usługę Cloud App Security",
- "configureCustomControlsText": "Skonfiguruj zasady niestandardowe",
- "controlLabelMulti": "Wybrane kontrolki: {0}",
- "controlLabelOne": "Wybrano 1 kontrolkę",
- "controlValidatorText": "Wybierz co najmniej jedną kontrolkę",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Dowiedz się więcej o wymaganiach zgodnych urządzeń.",
- "controlsDeviceComplianceInfoBubble": "Urządzenie musi być zgodne z usługą Intune. Jeśli urządzenie jest niezgodne, użytkownikowi zostanie wyświetlony monit o doprowadzenie urządzenia do stanu zgodności.",
- "controlsDomainJoinedAriaLabel": "Dowiedz się więcej o wymaganiach urządzeń dołączonych hybrydowo do rozwiązania Microsoft Entra.",
- "controlsDomainJoinedInfoBubble": "Urządzenia muszą być dołączone hybrydowo do usługi Microsoft Entra.",
- "controlsMamAriaLabel": "Dowiedz się więcej o wymaganiach zatwierdzonych aplikacji klienckich.",
- "controlsMamInfoBubble": "Urządzenie musi używać tych zatwierdzonych aplikacji klienckich.",
- "controlsMfaInfoBubble": "Użytkownik musi spełnić dodatkowe wymagania dotyczące zabezpieczeń, takie jak połączenie telefoniczne, wiadomość SMS",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Dowiedz się więcej o wymaganiach aplikacji chronionych przez zasady.",
- "controlsRequireCompliantAppInfoBubble": "Urządzenie musi używać aplikacji chronionych przez zasady.",
- "controlsRequirePasswordResetAriaLabel": "Dowiedz się więcej o konieczności zmiany hasła.",
- "controlsRequirePasswordResetInfoBubble": "Wymagaj zmiany hasła, aby zmniejszyć ryzyko związane z użytkownikiem. Ta opcja wymaga również uwierzytelniania wieloskładnikowego. Nie można użyć innych kontrolek.",
- "countriesRadiobuttonInfoBalloonContent": "Kraj/region, z którego ma miejsce logowanie, jest określany na podstawie adresu IP użytkownika.",
- "createNewVpnCert": "Nowy certyfikat",
- "createdTimeLabel": "Godzina utworzenia",
- "customRoleLabel": "Role niestandardowe (nieobsługiwane)",
- "dateRangeTypeLabel": "Zakres dat",
- "daysOfWeekPlaceholderText": "Filtruj dni tygodnia",
- "daysOfWeekTypeLabel": "Dni tygodnia",
- "deletePolicyNoLicenseText": "Teraz możesz usunąć te zasady. Po usunięciu nie będziesz w stanie utworzyć ich ponownie, dopóki nie uzyskasz wymaganych licencji.",
- "descriptionContentForControlsAndOr": "W przypadku wielu kontrolek",
- "devicePlatform": "Platforma urządzeń",
- "devicePlatformConditionHelpDescription": "Zastosuj zasady do wybranych platform urządzeń.\n[Dowiedz się więcej][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "Włączono: {0}",
- "devicePlatformIncludeExclude": "Wykluczono {0} i {1}",
- "devicePlatformNoSelectionError": "Wybieranie platform urządzeń wymaga wybrania jednego elementu podrzędnego.",
- "devicePlatformsNone": "Brak",
- "deviceSelectionBladeExcludeDescription": "Wybierz platformy, zostaną wykluczone z zasad",
- "deviceSelectionBladeIncludeDescription": "Wybierz platformy urządzeń, które będą objęte tymi zasadami",
- "deviceStateAll": "Stan wszystkich urządzeń",
- "deviceStateCompliant": "Urządzenie oznaczone jako zgodne",
- "deviceStateCompliantInfoContent": "Urządzenia zgodne z usługą Intune zostaną wykluczone z oceny tych zasad, więc jeśli na przykład zasady blokują dostęp, spowoduje to zablokowanie wszystkich urządzeń z wyjątkiem urządzeń zgodnych z usługą Intune.",
- "deviceStateConditionConfigureInfoContent": "Konfigurowanie zasad na podstawie stanu urządzenia",
- "deviceStateConditionSelectorInfoContent": "Niezależnie od tego, czy urządzenie, z poziomu z którego loguje się użytkownik, ma wartość „Dołączone hybrydowo do usługi Microsoft Entra”, czy „oznaczone jako zgodne”.\n Ta funkcja jest przestarzała. Zamiast tego użyj „{1}”.",
- "deviceStateConditionSelectorLabel": "Stan urządzenia (przestarzałe)",
- "deviceStateDomainJoined": "Urządzenie dołączone hybrydowo do usługi Microsoft Entra",
- "deviceStateDomainJoinedInfoContent": "Urządzenia przyłączone hybrydowo do usługi Microsoft Entra zostaną wykluczone z oceny tych zasad, więc jeśli na przykład zasady blokują dostęp, spowoduje to zablokowanie wszystkich urządzeń z wyjątkiem urządzeń przyłączonych hybrydowo do usługi Microsoft Entra.",
- "deviceStateDomainJoinedInfoLinkText": "Dowiedz się więcej.",
- "deviceStateExcludeDescription": "Wybierz warunek stanu urządzenia używany do wykluczania urządzeń z zasad.",
- "deviceStateIncludeAndExcludeOneLabel": "Dołącz: {0}. Wyklucz: {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "Dołącz: {0}. Wyklucz: {1}, {2}",
- "directoryRoleInfoContent": "Przypisz zasady do wbudowanych ról katalogów.",
- "directoryRolesLabel": "Role katalogu",
- "discardbutton": "Odrzuć",
- "downloadDefaultFileName": "Zakresy adresów IP",
- "downloadExampleFileName": "Przykład",
- "downloadExampleHeader": "To jest przykładowy plik z demonstracjami rodzajów danych, które mogą zostać zaakceptowane. Wiersze rozpoczynające się znakiem # zostaną zignorowane.",
- "duplicate": "Duplikuj",
- "duplicatePolicyName": "KOPIUJ {0}",
- "endDatePickerLabel": "Końce",
- "endTimePickerLabel": "Godzina zakończenia",
- "enterCountryText": "Adres IP i kraj/region są przetwarzane razem. Wybierz kraj/region.",
- "enterIpText": "Adres IP i kraj/region są przetwarzane razem. Podaj adres IP.",
- "enterUserText": "Nie wybrano żadnego użytkownika. Wybierz go.",
- "evaluationResult": "Wynik oceny",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Tylko usługa Exchange ActiveSync z obsługiwanymi platformami",
- "excludeAllTrustedLocationSelectorText": "wszystkie zaufane lokalizacje",
- "featureRequiresP2": "Ta funkcja wymaga licencji Microsoft Entra ID P2.",
- "friday": "Piątek",
- "grantControls": "Udziel kontroli",
- "gridNetworkTrusted": "Zaufane",
- "gridPolicyCreatedDateTime": "Data utworzenia",
- "gridPolicyEnabled": "Włączono",
- "gridPolicyModifiedDateTime": "Data modyfikacji",
- "gridPolicyName": "Nazwa zasad",
- "gridPolicyState": "Stan",
- "groupSelectionBladeExcludeDescription": "Wybierz grupy, wobec których zostanie zastosowane wykluczenie z zasad",
- "groupSelectionBladeExcludedSelectorTitle": "Wybieranie grup wykluczonych",
- "groupSelectionBladeSelect": "Wybieranie grup",
- "groupSelectorInfoBallonText": "Grupy w katalogu, wobec których zostaną zastosowane zasady. Przykład: „grupa pilotażowa”",
- "groupsSelectionBladeTitle": "Grupy",
- "helpCommonScenariosText": "Chcesz zapoznać się z typowymi scenariuszami?",
- "helpCondition1": "Gdy jakikolwiek użytkownik znajduje się poza siecią firmową",
- "helpCondition2": "Gdy użytkownicy z grupy „Menedżerowie” logują się",
- "helpConditionsTitle": "Warunki",
- "helpControl1": "Wymagane jest zalogowanie się za pomocą uwierzytelniania wieloskładnikowego",
- "helpControl2": "Wymagane jest od nich używanie urządzenia zgodnego z usługą Intune lub urządzenia przyłączonego do domeny",
- "helpControlsTitle": "Formanty",
- "helpIntroText": "Dostęp warunkowy umożliwia wymuszanie wymagań dotyczących dostępu, gdy wystąpią określone warunki. Poniżej przedstawionych jest kilka przykładów",
- "helpIntroTitle": "Co to jest dostęp warunkowy?",
- "helpLearnMoreText": "Chcesz dowiedzieć się więcej na temat dostępu warunkowego?",
- "helpStartStep1": "Utwórz pierwszą zasadę, klikając pozycję „+ Nowe zasady”",
- "helpStartStep2": "Określ warunki i kontrolki zasad",
- "helpStartStep3": "Gdy wszystko będzie gotowe, nie zapomnij włączyć zasad i utworzyć",
- "helpStartTitle": "Rozpocznij",
- "highRisk": "Wysokie",
- "includeAndExcludeAppsTextFormat": "Uwzględnij: {0}. Wyklucz: {1}.",
- "includeAppsTextFormat": "Uwzględnij: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Nieznane obszary to adresy IP, których nie można mapować na kraj/region.",
- "includeUnknownAreasCheckboxLabel": "Uwzględnij nieznane obszary",
- "infoCommandLabel": "Informacje",
- "invalidCertDuration": "Nieprawidłowy czas trwania certyfikatu",
- "invalidIpAddress": "Wartość musi być prawidłowym adresem IP",
- "invalidReAuthSignInRiskOptionSelected": "Kontrola sesji „częstotliwość logowania za każdym razem” nie zezwala na wybór opcji „brak ryzyka” w kontrolce warunku „poziom ryzyka logowania”.",
- "invalidUriErrorMsg": "Wprowadź prawidłowy identyfikator Uri. Przykład: „uri:contoso.com:acr” ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Załaduj wszystko",
- "loading": "Trwa ładowanie...",
- "locationConfigureNamedLocationsText": "Konfiguruj wszystkie zaufane lokalizacje",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Nazwa lokalizacji jest za długa. Maksymalna długość to 256 znaków",
- "locationSelectionBladeExcludeDescription": "Wybierz lokalizacje, które zostaną wykluczone z zasad",
- "locationSelectionBladeIncludeDescription": "Wybierz lokalizacje, które mają zostać dołączone do tych zasad",
- "locationsAllLocationsLabel": "Dowolna lokalizacja",
- "locationsAllNamedLocationsLabel": "Wszystkie zaufane adresy IP",
- "locationsAllPrivateLinksLabel": "Wszystkie prywatne linki w mojej dzierżawie",
- "locationsIncludeExcludeLabel": "{0} i wyklucz wszystkie zaufane adresy IP",
- "locationsSelectedPrivateLinksLabel": "Wybrane łącza prywatne",
- "lowRisk": "Niskie",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "Aby zarządzać zasadami dostępu warunkowego, Twoja organizacja potrzebuje usługi Microsoft Entra ID P1 lub P2.",
- "manageSecurityDefaultsAriaLabel": "Zarządzaj ustawieniami domyślnymi zabezpieczeń.",
- "markAsTrustedCheckboxInfoBalloonContent": "Logowanie z zaufanej lokalizacji obniża ryzyko związane z logowaniem użytkownika. Oznacz tę lokalizację jako zaufaną tylko wtedy, jeśli wprowadzone zakresy adresów IP są uznawane za znane i wiarygodne w Twojej organizacji.",
- "markAsTrustedCheckboxLabel": "Oznacz jako zaufaną lokalizację",
- "mediumRisk": "Średnie",
- "memberSelectionCommandRemove": "Usuń",
- "menuItemClaimProviderControls": "Kontrolki niestandardowe (wersja zapoznawcza)",
- "menuItemClassicPolicies": "Zasady klasyczne",
- "menuItemInsightsAndReporting": "Szczegółowe informacje i raportowanie",
- "menuItemManage": "Zarządzaj",
- "menuItemNamedLocationsPreview": "Nazwane lokalizacje (wersja zapoznawcza)",
- "menuItemNamedNetworks": "Nazwane lokalizacje",
- "menuItemPolicies": "Zasady",
- "menuItemTermsOfUse": "Warunki użytkowania",
- "modifiedTimeLabel": "Godzina modyfikacji",
- "monday": "Poniedziałek",
- "nameLabel": "Nazwa",
- "namedLocationCountryInfoBanner": "Tylko adresy IPv4 są mapowane na kraje/regiony. Adresy IPv6 są dołączane w przypadku nieznanych krajów/regionów.",
- "namedLocationTypeCountry": "Kraje/regiony",
- "namedLocationTypeLabel": "Zdefiniuj lokalizację za pomocą:",
- "namedLocationUpsellBanner": "Ten widok jest przestarzały. Przejdź do nowego i ulepszonego widoku \"Nazwane lokalizacje\".",
- "namedLocationsHelpDescription": "Nazwane lokalizacje są używane przez raporty zabezpieczeń usługi Microsoft Entra ID w celu zmniejszenia liczby wyników fałszywie dodatnich i zasad dostępu warunkowego usługi Microsoft Entra.\n[Dowiedz się więcej][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Dodaj nowy zakres adresów IP (np. 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "Należy wybrać co najmniej jeden kraj/region",
- "namedNetworkDeleteCommand": "Usuń",
- "namedNetworkDeleteDescription": "Czy na pewno chcesz usunąć „{0}”? Tej akcji nie można cofnąć.",
- "namedNetworkDeleteTitle": "Czy na pewno?",
- "namedNetworkDownloadIpRange": "Pobierz",
- "namedNetworkInvalidRange": "Wartość musi być prawidłowym zakresem adresów IP.",
- "namedNetworkIpRangeNeeded": "Wymagany jest co najmniej jeden prawidłowy zakres adresów IP",
- "namedNetworkIpRangesDescriptionContent": "Skonfiguruj zakresy adresów IP w organizacji",
- "namedNetworkIpRangesTab": "Zakresy adresów IP",
- "namedNetworkListAdd": "Nowa lokalizacja",
- "namedNetworkListConfigureTrustedIps": "Konfiguruj zaufane adresy IP z uwierzytelnianiem wieloskładnikowym",
- "namedNetworkNameDescription": "Przykład: „biuro w Redmond”",
- "namedNetworkNameInvalid": "Podana nazwa jest nieprawidłowa.",
- "namedNetworkNameRequired": "Musisz podać nazwę dla tej lokalizacji.",
- "namedNetworkNoIpRanges": "Brak zakresów adresów IP",
- "namedNetworkNotificationCreateDescription": "Tworzenie lokalizacji o nazwie „{0}”",
- "namedNetworkNotificationCreateFailedDescription": "Nie można utworzyć lokalizacji „{0}”. Spróbuj ponownie później.",
- "namedNetworkNotificationCreateFailedTitle": "Nie można utworzyć lokalizacji",
- "namedNetworkNotificationCreateSuccessDescription": "Utworzono lokalizację o nazwie „{0}”",
- "namedNetworkNotificationCreateSuccessTitle": "Utworzono sieć „{0}”",
- "namedNetworkNotificationCreateTitle": "Tworzenie sieci „{0}”",
- "namedNetworkNotificationDeleteDescription": "Usuwanie lokalizacji o nazwie „{0}”",
- "namedNetworkNotificationDeleteFailedDescription": "Nie można usunąć lokalizacji „{0}”. Spróbuj ponownie później.",
- "namedNetworkNotificationDeleteFailedTitle": "Nie można usunąć lokalizacji",
- "namedNetworkNotificationDeleteSuccessDescription": "Usunięto lokalizację o nazwie „{0}”",
- "namedNetworkNotificationDeleteSuccessTitle": "Usunięto sieć „{0}”",
- "namedNetworkNotificationDeleteTitle": "Usuwanie znakowania „{0}”",
- "namedNetworkNotificationUpdateDescription": "Aktualizowanie lokalizacji o nazwie „{0}”",
- "namedNetworkNotificationUpdateFailedDescription": "Nie można zaktualizować lokalizacji „{0}”. Spróbuj ponownie później.",
- "namedNetworkNotificationUpdateFailedTitle": "Nie można zaktualizować lokalizacji",
- "namedNetworkNotificationUpdateSuccessDescription": "Zaktualizowano lokalizację o nazwie „{0}”",
- "namedNetworkNotificationUpdateSuccessTitle": "Zaktualizowano sieć „{0}”",
- "namedNetworkNotificationUpdateTitle": "Aktualizowanie sieci „{0}”",
- "namedNetworkSearchPlaceholder": "Wyszukaj lokalizacje.",
- "namedNetworkUploadFailedDescription": "Wystąpił błąd podczas analizowania dostarczonego pliku. Przekaż zwykły plik tekstowy, w którym każdy wiersz ma format CIDR.",
- "namedNetworkUploadFailedTitle": "Nie można przeanalizować wartości „{0}”",
- "namedNetworkUploadInProgressDescription": "Próba przeanalizowania prawidłowych wartości CIDR z pliku „{0}”.",
- "namedNetworkUploadInProgressTitle": "Analizowanie pliku „{0}”",
- "namedNetworkUploadInvalidDescription": "Plik „{0}” jest zbyt duży lub ma nieprawidłowy format.",
- "namedNetworkUploadInvalidTitle": "Plik „{0}” jest nieprawidłowy",
- "namedNetworkUploadIpRange": "Przekaż",
- "namedNetworkUploadSuccessDescription": "Przeanalizowane wiersze: {0}. Nieprawidłowy format: {1}. Pominięto: {2}.",
- "namedNetworkUploadSuccessTitle": "Zakończono analizowanie pliku „{0}”",
- "namedNetworksAdd": "Nowa nazwana lokalizacja",
- "namedNetworksConditionHelpDescription": "Kontrola dostępu użytkownika na podstawie jego fizycznej lokalizacji.\n[Dowiedz się więcej][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "Wykluczono {0} i {1}",
- "namedNetworksHelpDescription": "Nazwane lokalizacje są używane przez raporty zabezpieczeń Microsoft Entra ID w celu zmniejszenia liczby wyników fałszywie dodatnich i zasad dostępu warunkowego usługi Microsoft Entra.\n[Dowiedz się więcej][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "Włączono: {0}",
- "namedNetworksNone": "Nie odnaleziono żadnej nazwanej lokalizacji.",
- "namedNetworksTitle": "Skonfiguruj lokalizacje",
- "namednetworkExceedingSizeErrorBladeTitle": "Szczegóły błędu",
- "namednetworkExceedingSizeErrorDetailText": "Kliknij tutaj, aby uzyskać więcej informacji.",
- "namednetworkExceedingSizeErrorMessage": "Przekroczono maksymalny dozwolony rozmiar magazynu dla nazwanych lokalizacji. Spróbuj ponownie, używając krótszej listy. Kliknij tutaj, aby wyświetlić więcej szczegółów.",
- "needMfaSecondary": "Gdy opcja „Częstotliwość operacji logowania za każdym razem” jest wybierana wraz z opcją „Tylko pomocnicze metody uwierzytelniania”, należy wybrać opcję „Wymagaj uwierzytelniania wieloskładnikowego”",
- "needMfaSpecificApps": "Mechanizm kontroli sesji „Częstotliwość operacji logowania za każdym razem” wymaga udzielenia kontroli „Wymagaj uwierzytelniania wieloskładnikowego” w przypadku wybrania specjalnie obsługiwanych aplikacji",
- "newCertName": "nowy certyfikat",
- "noAttributePermissionsError": "Niewystarczające uprawnienia do tworzenia lub aktualizowania zasad. Do dodawania/edytowania filtrów dynamicznych wymagana jest rola czytnika definicji atrybutów.",
- "noPolicyRowMessage": "Brak zasad",
- "noSPSelected": "Nie wybrano jednostki usługi",
- "noUpdatePermissionMessage": "Nie masz uprawnień do aktualizowania tych ustawień. Skontaktuj się z administratorem globalnym, aby uzyskać dostęp.",
- "noUserSelected": "Nie wybrano żadnego użytkownika",
- "noneRisk": "Nie ma ryzyka",
- "office365Description": "Te aplikacje to między innymi Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online i Office 365 Yammer.",
- "office365InfoBox": "Co najmniej jedna z wybranych aplikacji jest częścią usługi Office 365. Zalecamy ustawienie zasad w aplikacji Office 365.",
- "oneUserSelected": "Wybrano jednego użytkownika",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Tylko administratorzy globalni mogą zapisać te zasady.",
- "or": "{0} LUB {1}",
- "pickerDoneCommand": "Gotowe",
- "policiesBladeAdPremiumUpsellBannerText": "Twórz własne zasady i określaj konkretne warunki docelowe, takie jak aplikacje w chmurze, ryzyko związane z logowaniem i platformy urządzeń, za pomocą usługi Microsoft Entra ID w warstwie Premium.",
- "policiesBladeTitle": "Zasady",
- "policiesBladeTitleWithAppName": "Zasady: {0}",
- "policiesDisabledBannerText": "Tworzenie i edytowanie zasad jest zabronione w przypadku aplikacji z atrybutem połączonego logowania.",
- "policiesHitMaxLimitStatusBarMessage": "Osiągnięto maksymalną liczbę zasad dla tej dzierżawy. Usuń zasady przed utworzeniem nowych.",
- "policyAssignmentsSection": "Przypisania",
- "policyBlockAllInfoBox": "Skonfigurowane zasady zablokują wszystkich użytkowników, więc nie są one obsługiwane. Przejrzyj przypisania i kontrolki. Jeśli chcesz zapisać te zasady, wyklucz bieżącego użytkownika {0}.",
- "policyCloudAppsDisplayTextAllApp": "Wszystkie aplikacje",
- "policyCloudAppsLabel": "Aplikacje w chmurze",
- "policyConditionClientAppDescription": "Oprogramowanie używane przez użytkownika do uzyskania dostępu do aplikacji w chmurze. Przykład: „przeglądarka”",
- "policyConditionClientAppV2Description": "Oprogramowanie używane przez użytkownika do uzyskania dostępu do aplikacji w chmurze. Przykład: „przeglądarka”",
- "policyConditionDevicePlatform": "Platformy urządzeń",
- "policyConditionDevicePlatformDescription": "Platforma, z której loguje się użytkownik. Przykład: „iOS”",
- "policyConditionLocation": "Lokalizacje",
- "policyConditionLocationDescription": "Lokalizacja (ustalana podstawie zakresu adresów IP), z której loguje się użytkownik",
- "policyConditionLocationPreview": "Lokalizacje (wersja zapoznawcza)",
- "policyConditionSigninRisk": "Ryzyko logowania",
- "policyConditionSigninRiskDescription": "Prawdopodobieństwo, że loguje się ktoś inny niż użytkownik. Poziom ryzyka może być wysoki, średni lub niski. Wymaga licencji usługi Microsoft Entra ID P2.",
- "policyConditionUserRisk": "Ryzyko związane z użytkownikiem",
- "policyConditionUserRiskDescription": "Konfigurowanie poziomów ryzyka związanego z użytkownikiem potrzebnych do wymuszania zasad",
- "policyConditioniClientApp": "Aplikacje klienckie",
- "policyControlAllowAccessDisplayedName": "Przyznaj dostęp",
- "policyControlAuthenticationStrengthDisplayedName": "Wymagaj siły uwierzytelniania (wersja zapoznawcza)",
- "policyControlBladeTitle": "Udziel",
- "policyControlBlockAccessDisplayedName": "Blokuj dostęp",
- "policyControlCompliantDeviceDisplayedName": "Wymagaj, aby urządzenie było oznaczone jako zgodne",
- "policyControlContentDescription": "Kontroluj wymuszanie dostępu, aby udzielać dostępu lub go blokować.",
- "policyControlInfoBallonText": "Zablokuj dostęp lub wybierz dodatkowe wymagania, które będą musiały zostać spełnione, aby uzyskać zezwolenie na dostęp",
- "policyControlMfaChallengeDisplayedName": "Wymagaj uwierzytelniania wieloskładnikowego",
- "policyControlRequireCompliantAppDisplayedName": "Wymagaj zasad ochrony aplikacji",
- "policyControlRequireDomainJoinedDisplayedName": "Wymagaj urządzenia dołączonego hybrydowo do usługi Microsoft Entra",
- "policyControlRequireMamDisplayedName": "Wymagaj zatwierdzonej aplikacji klienckiej",
- "policyControlRequiredPasswordChangeDisplayedName": "Wymagaj zmiany hasła",
- "policyControlSelectAuthStrength": "Wymagaj siły uwierzytelniania",
- "policyControlsNoControlsSelected": "Nie wybrano żadnej kontrolki",
- "policyControlsSection": "Kontrole dostępu",
- "policyCreatBladeTitle": "Nowy",
- "policyCreateButton": "Utwórz",
- "policyCreateFailedMessage": "Błąd: {0}",
- "policyCreateFailedTitle": "Nie można utworzyć zasad „{0}”",
- "policyCreateInProgressTitle": "Tworzenie sieci „{0}”",
- "policyCreateSuccessMessage": "Pomyślnie utworzono zasady „{0}”. Zasady zostaną włączone w ciągu kilku minut, jeśli opcja „Włącz zasady” została ustawiona na „Wł.”.",
- "policyCreateSuccessTitle": "Pomyślnie utworzono zasady „{0}”",
- "policyDeleteConfirmation": "Czy na pewno chcesz usunąć „{0}”? Tej akcji nie można cofnąć.",
- "policyDeleteFailTitle": "Nie można usunąć znakowania „{0}”",
- "policyDeleteInProgressTitle": "Usuwanie znakowania „{0}”",
- "policyDeleteSuccessTitle": "Pomyślnie usunięto znakowanie „{0}”",
- "policyEnforceLabel": "Włącz zasady",
- "policyErrorCannotSetSigninRisk": "Nie masz uprawnienia do zapisania zasad z warunkiem ryzyka logowania.",
- "policyErrorNoPermission": "Nie masz uprawnień do zapisywania zasad. Skontaktuj się z administratorem globalnym.",
- "policyErrorUnknown": "Wystąpił błąd, spróbuj ponownie później.",
- "policyFallbackWarningMessage": "Nie można utworzyć lub zaktualizować zasad „{0}” przy użyciu funkcji MS Graph, co spowodowało rezerwowe użycie funkcji AD Graph. Zbadaj następujący scenariusz, ponieważ prawdopodobnie występuje błąd podczas wywoływania punktu końcowego zasad dla funkcji MS Graph z niezgodnym warunkiem.",
- "policyFallbackWarningTitle": "Tworzenie lub aktualizowanie zasad „{0}” powiodło się częściowo",
- "policyNameCannotBeEmpty": "Nazwa zasad nie może być pusta",
- "policyNameDevice": "Zasady urządzeń",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Zasady zarządzania aplikacjami mobilnymi",
- "policyNameMfaLocation": "Uwierzytelnianie wieloskładnikowe i zasady dotyczące lokalizacji",
- "policyNamePlaceholderText": "Przykład: „zasady aplikacji dotyczące zgodności urządzeń”",
- "policyNameTooLongError": "Nazwa zasad jest za długa. Maksymalna długość to 256 znaków",
- "policyOff": "Wyłączone",
- "policyOn": "Włączone",
- "policyReportOnly": "Sam raport",
- "policyReviewSection": "Przegląd",
- "policySaveButton": "Zapisz",
- "policyStatusIconDescription": "Zasady są włączone",
- "policyStatusIconEnabled": "Włączona ikona stanu",
- "policyTemplateName1": "Użyj wymuszonych ograniczeń aplikacji {0} w przypadku dostępu w przeglądarce",
- "policyTemplateName2": "Zezwalaj na dostęp do aplikacji {0} tylko na urządzeniach zarządzanych",
- "policyTemplateName3": "Zasady zmigrowane z ustawień ciągłej oceny dostępu",
- "policyTriggerRiskSpecific": "Wybierz określony poziom ryzyka",
- "policyTriggersInfoBalloonText": "Warunki definiujące, kiedy zasady zostaną zastosowane. Przykład: „lokalizacja”",
- "policyTriggersNoConditionsSelected": "Nie wybrano żadnych warunków",
- "policyTriggersSelectorLabel": "Warunki",
- "policyUpdateFailedMessage": "Błąd: {0}",
- "policyUpdateFailedTitle": "Nie można zaktualizować elementu {0}",
- "policyUpdateInProgressTitle": "Aktualizowanie elementu {0}",
- "policyUpdateSuccessMessage": "Pomyślnie zaktualizowano element {0}. Zasady zostaną włączone w ciągu kilku minut, jeśli opcja „Włącz zasady” jest ustawiona na „Wł.”.",
- "policyUpdateSuccessTitle": "Pomyślnie zaktualizowano element {0}",
- "primaryCol": "Podstawowe",
- "privateLinkLabel": "Usługa Private Link usługi Microsoft Entra ID",
- "reportOnlyInfoBox": "Tryb samego raportowania: zasady są oceniane i rejestrowane przy logowaniu, ale nie mają wpływu na użytkowników.",
- "requireAllControlsText": "Wymagaj wszystkich wybranych kontrolek",
- "requireCompliantDevice": "Wymagaj zgodnego urządzenia",
- "requireDomainJoined": "Wymagaj urządzenia przyłączonego do domeny",
- "requireGrantReauth": "Kontrolka sesji „Częstotliwość operacji logowania za każdym razem” wymaga udzielenia kontroli „Wymagaj uwierzytelniania wieloskładnikowego” lub „Wymagaj zmiany hasła” w przypadku wybrania opcji „Wszystkie aplikacje w chmurze”",
- "requireMFA": "Wymagaj uwierzytelniania wieloskładnikowego",
- "requireMfaReauth": "Kontrolka sesji „Częstotliwość operacji logowania za każdym razem” wymaga udzielenia kontroli „Wymagaj uwierzytelniania wieloskładnikowego” dla opcji „Ryzyko dotyczące operacji logowania”",
- "requireOneControlText": "Wymagaj jednej z wybranych kontrolek",
- "requirePasswordChangeReauth": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga kontroli nad udzielaniem „wymagaj zmiany hasła” dla „ryzyka związanego z użytkownikiem”",
- "requireRiskReauth": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga kontroli sesji „ryzyko związane z użytkownikiem” lub „ryzyko logowania” po wybraniu opcji „wszystkie aplikacje w chmurze”.",
- "requireRiskReauthRiskNotEnabled": "Kontrola sesji „częstotliwość logowania za każdym razem” jest niedostępna po wybraniu opcji „wszystkie aplikacje w chmurze”.",
- "requireRiskReauthSignInOnly": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga kontroli sesji „ryzyko związane z logowaniem” po wybraniu opcji „wszystkie aplikacje w chmurze”.",
- "requireRiskReauthUserOnly": "Kontrola sesji „częstotliwość logowania za każdym razem” wymaga kontroli sesji „ryzyko związane z użytkownikiem” po wybraniu opcji „wszystkie aplikacje w chmurze”.",
- "resetFilters": "Resetuj filtry",
- "sPRequired": "Wymagana jednostka usługi",
- "sPSelectorInfoBalloon": "Użytkownik lub jednostka usługi, którą chcesz testować",
- "saturday": "Sobota",
- "searchTextTooLongError": "Wyszukiwany tekst jest za długi. Maksymalna liczba znaków to 256",
- "securityDefaultsPolicyName": "Wartości domyślne zabezpieczeń",
- "securityDefaultsTextMessage": "Wartości domyślne zabezpieczeń muszą być wyłączone, aby można było włączyć zasady dostępu warunkowego.",
- "securityDefaultsUpdateInProgressText": "Trwa aktualizacja ustawień domyślnych zabezpieczeń. Poczekaj chwilę i spróbuj ponownie.",
- "securityDefaultsWarningMessage": "Wygląda na to, że zamierzasz zarządzać konfiguracjami zabezpieczeń swojej organizacji. To świetnie! Przed włączeniem zasad dostępu warunkowego musisz najpierw {0}wyłączyć wartości domyślne zabezpieczeń{1}.",
- "selectDevicePlatforms": "Wybierz platformy urządzeń",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Wybierz lokalizacje",
- "selectedSP": "Wybrano jednostkę usługi",
- "servicePrincipalBladeExcludedSelectorTitle": "Wybieranie wykluczonych jednostek usług",
- "servicePrincipalBladeIncludedSelectorTitle": "Wybieranie jednostek usług",
- "servicePrincipalDataGridAria": "Lista dostępnych jednostek usługi",
- "servicePrincipalDropDownLabel": "Czego dotyczą te zasady?",
- "servicePrincipalInfoBox": "Niektóre warunki są niedostępne z powodu wyboru elementu „{0}” w przypisaniu zasad",
- "servicePrincipalRadioAll": "Wszystkie posiadane jednostki usługi",
- "servicePrincipalRadioSelect": "Wybrane jednostki usługi",
- "servicePrincipalSelectionsAria": "Siatka wybranych jednostek usługi",
- "servicePrincipalSelectorAria": "Lista wybranych jednostek usługi",
- "servicePrincipalSelectorMultiple": "Wybrane jednostki usługi: {0}",
- "servicePrincipalSelectorSingle": "Wybrano 1 jednostkę usługi",
- "servicePrincipalSpecificExc": "Wykluczone określone jednostki usługi",
- "servicePrincipalSpecificInc": "Uwzględnione określone jednostki usługi",
- "servicePrincipals": "Jednostki usługi",
- "sessionControlBladeTitle": "Sesja",
- "sessionControlDescriptionContent": "Kontroluj dostęp na podstawie kontrolek sesji, aby umożliwić korzystanie z ograniczonych środowisk w ramach określonych aplikacji w chmurze.",
- "sessionControlDisableInfo": "Ta kontrola działa tylko w przypadku obsługiwanych aplikacji. Obecnie usługi Office 365, Exchange Online i SharePoint Online to jedyne aplikacje w chmurze, które obsługują ograniczenia wymuszone przez aplikację. Kliknij tutaj, aby dowiedzieć się więcej.",
- "sessionControlInfoBallonText": "Kontrolki sesji umożliwiają korzystanie z ograniczonego środowiska w ramach aplikacji w chmurze.",
- "sessionControls": "Kontrole sesji",
- "sessionControlsAppEnforcedLabel": "Użyj ograniczeń wymuszonych przez aplikację",
- "sessionControlsCasLabel": "Użyj Kontroli dostępu warunkowego aplikacji",
- "sessionControlsSecureSignInLabel": "Wymagaj powiązania tokena",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "Włączono: {0}",
- "signinRiskReauth": "Gdy wybrano udzielenie uprawnienia „Wymagaj uwierzytelniania wieloskładnikowego” i kontrolkę sesji „Częstotliwość operacji logowania za każdym razem”, należy wybrać warunek „Ryzyko dotyczące operacji logowania”",
- "signinRiskTriggerDescriptionContent": "Wybierz poziom ryzyka logowania",
- "singleTenantServicePrincipalInfoBallonText": "Zasady mają zastosowanie tylko do pojedynczych jednostek usługi dzierżawy należących do Twojej organizacji. Kliknij tutaj, aby dowiedzieć się więcej ",
- "specificSigninRiskLevelsOption": "Wybierz konkretne poziomy ryzyka logowania",
- "specificUsersExcluded": "określeni użytkownicy wyłączeni",
- "specificUsersIncluded": "Określeni użytkownicy uwzględnieni",
- "specificUsersIncludedAndExcluded": "Określeni użytkownicy wykluczeni i włączeni",
- "startDatePickerLabel": "Początek",
- "startFreeTrial": "Zacznij korzystać z bezpłatnej wersji próbnej",
- "startTimePickerLabel": "Godzina rozpoczęcia",
- "sunday": "Niedziela",
- "testButton": "What If",
- "thumbprintCol": "Odcisk palca",
- "thursday": "Czwartek",
- "timeConditionAllTimesLabel": "W dowolnym czasie",
- "timeConditionIntroText": "Konfiguruj czas, dla którego będą stosowane te zasady",
- "timeConditionSelectorInfoBallonContent": "Kiedy użytkownik się loguje. Przykład: „Środa 9–17 UTC”",
- "timeConditionSelectorLabel": "Czas (wersja zapoznawcza)",
- "timeConditionSpecificLabel": "Określone przedziały czasu",
- "timeSelectorAllTimesText": "W dowolnym czasie",
- "timeSelectorSpecificTimesText": "Skonfigurowano określone czasy",
- "timeZoneDropdownInfoBalloonContent": "Wybierz strefę czasową, która definiuje zakres czasu. Te zasady mają zastosowanie do użytkowników we wszystkich strefach czasowych. Na przykład zakres czasu „Środa 7-17” określony dla jednego użytkownika będzie oznaczać „Środa 10-18” dla użytkownika w innej strefie czasowej.",
- "timeZoneDropdownLabel": "Strefa czasowa",
- "timeZoneDropdownPlaceholderText": "Wybierz strefę czasową",
- "tooManyPoliciesDescription": "Wyświetlanych jest teraz tylko 50 pierwszych zasad. Kliknij tutaj, aby wyświetlić wszystkie zasady",
- "tooManyPoliciesTitle": "Znaleziono więcej niż 50 zasad",
- "trustedLocationStatusIconDescription": "Lokalizacja jest zaufana",
- "trustedLocationStatusIconEnabled": "Ikona stanu zaufania",
- "tuesday": "Wtorek",
- "uploadInBadState": "Nie można przekazać określonego pliku.",
- "upsellAppsDescription": "Wymagaj uwierzytelniania wieloskładnikowego w przypadku poufnych aplikacji przez cały czas lub tylko w przypadku dostępu spoza sieci firmowej.",
- "upsellAppsTitle": "Zabezpiecz aplikacje",
- "upsellBannerText": "Uzyskaj bezpłatną wersję próbną usługi — wersja Premium, aby korzystać z tej funkcji",
- "upsellDataDescription": "Wymagaj, aby urządzenie było oznaczone jako zgodne lub dołączone hybrydowo do usługi Microsoft Entra, aby zezwolić na dostęp do zasobów firmy.",
- "upsellDataTitle": "Zabezpiecz dane",
- "upsellDescription": "Dostęp warunkowy zapewnia kontrolę i ochronę, dzięki którym dane korporacyjne są bezpieczne, a pracownicy mogą korzystać ze środowiska umożliwiającego najlepsze wykonywanie pracy z dowolnego urządzenia. Przykładowo możesz ograniczyć dostęp spoza sieci firmowej lub ograniczyć dostęp do urządzeń, które spełniają zasady zgodności.",
- "upsellRiskDescription": "Wymagaj uwierzytelniania wieloskładnikowego w przypadku zdarzeń o podwyższonym ryzyku wykrytych przez system uczenia maszynowego firmy Microsoft.",
- "upsellRiskTitle": "Chroń przed ryzykiem",
- "upsellTitle": "Dostęp warunkowy",
- "upsellWhyTitle": "Dlaczego warto używać dostępu warunkowego?",
- "userAppNoneOption": "Brak",
- "userNamePlaceholderText": "Podaj nazwę użytkownika",
- "userNotSetSeletorLabel": "Nie wybrano żadnego użytkownika ani grupy",
- "userOnlySelectionBladeExcludeDescription": "Wybierz użytkowników, wobec których zostanie zastosowane wykluczenie z zasad",
- "userOrGroupSelectionCountDiffBannerText": "Z katalogu usunięto elementy ({0}) skonfigurowane w ramach tych zasad, ale nie ma to wpływu na innych użytkowników i inne grupy. Przy następnej aktualizacji nastąpi usunięcie usuniętych użytkowników i usuniętych grup.",
- "userOrSPNotSetSelectorLabel": "Wybrano 0 tożsamości użytkowników lub obciążeń",
- "userOrSPSelectionBladeTitle": "Tożsamości użytkowników lub obciążeń",
- "userOrSPSelectorInfoBallonText": "Tożsamości w katalogu, do których stosują się te zasady, w tym użytkownicy, grupy i jednostki usług",
- "userRequired": "Wymagane przez użytkownika",
- "userRiskErrorBox": "Warunek „Ryzyko związane z użytkownikiem” musi być wybrany, jeśli wybrano udzielenie „Wymagaj zmiany hasła”",
- "userRiskReauth": "Warunek „Ryzyko związane z użytkownikiem”, a nie „Ryzyko logowania”, musi być wybrany, gdy jest wybrane udzielenie uprawnienia „Wymagaj zmiany hasła” i kontrola sesji „Częstotliwość logowania za każdym razem”",
- "userSPRequired": "Wymagany użytkownik lub jednostka usługi",
- "userSPSelectorTitle": "Tożsamość użytkownika lub obciążenia",
- "userSelectionBladeAllUsersAndGroups": "Wszyscy użytkownicy i wszystkie grupy",
- "userSelectionBladeExcludeDescription": "Wybierz użytkowników i grupy, wobec których zostanie zastosowane wykluczenie z zasad",
- "userSelectionBladeExcludeTabTitle": "Wyklucz",
- "userSelectionBladeExcludedSelectorTitle": "Wybierz wykluczonych użytkowników i wykluczone grupy",
- "userSelectionBladeIncludeDescription": "Wybierz użytkowników, dla których będą stosowane te zasady",
- "userSelectionBladeIncludeTabTitle": "Uwzględnij",
- "userSelectionBladeIncludedSelectorTitle": "Wybierz",
- "userSelectionBladeSelectUsers": "Wybierz użytkowników",
- "userSelectionBladeSelectedUsers": "Wybieranie użytkowników i grup",
- "userSelectionBladeTitle": "Użytkownicy i grupy",
- "userSelectorBladeTitle": "Użytkownicy",
- "userSelectorExcluded": "Wyłączono: {0}",
- "userSelectorGroupPlural": "Grupy: {0} ",
- "userSelectorGroupSingular": "1 grupa",
- "userSelectorIncluded": "Włączono: {0}",
- "userSelectorInfoBallonText": "Użytkownicy i grupy w katalogu, wobec których zostaną zastosowane zasady. Przykład: „grupa pilotażowa”",
- "userSelectorSelected": "Wybrano: {0}",
- "userSelectorTitle": "Użytkownik",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "Użytkownicy: {0}",
- "userSelectorUserSingular": "1 użytkownik",
- "userSelectorWithExclusion": "{0} i {1}",
- "usersGroupsLabel": "Użytkownicy i grupy",
- "viewApprovedAppsText": "Zobacz listę zatwierdzonych aplikacji klienckich",
- "viewCompliantAppsText": "Zobacz listę aplikacji klienckich chronionych przez zasady",
- "viewPolicyInformation": "Wyświetl informacje o zasadach",
- "vpnBladeTitle": "Łączność sieci VPN",
- "vpnCertCreateFailedMessage": "Błąd: {0}",
- "vpnCertCreateFailedTitle": "Nie można utworzyć zasad {0}",
- "vpnCertCreateInProgressTitle": "Tworzenie zasobu {0}",
- "vpnCertCreateSuccessMessage": "Pomyślnie utworzono: {0}.",
- "vpnCertCreateSuccessTitle": "Pomyślnie utworzono: {0}",
- "vpnCertNoRowsMessage": "Nie znaleziono certyfikatów sieci VPN",
- "vpnCertUpdateFailedMessage": "Błąd: {0}",
- "vpnCertUpdateFailedTitle": "Nie można zaktualizować elementu {0}",
- "vpnCertUpdateInProgressTitle": "Aktualizowanie elementu {0}",
- "vpnCertUpdateSuccessMessage": "Pomyślnie zaktualizowano: {0}.",
- "vpnCertUpdateSuccessTitle": "Pomyślnie zaktualizowano element {0}",
- "vpnFeatureInfo": "Aby uzyskać więcej informacji o łączności sieci VPN i dostępie warunkowym, kliknij tutaj.",
- "vpnFeatureWarning": "Po utworzeniu certyfikatu sieci VPN w witrynie, usługa Microsoft Entra ID natychmiast rozpocznie korzystanie z niego w celu wystawiania klientowi sieci VPN certyfikatów o krótkim okresie życia. Niezwykle ważne jest natychmiastowe wdrożenie certyfikatu sieci VPN na serwerze sieci VPN, aby uniknąć problemów z weryfikacją poświadczeń klienta sieci VPN.",
- "vpnMenuText": "Łączność sieci VPN",
- "vpncertDropdownDefaultOption": "Czas trwania",
- "vpncertDropdownInfoBalloonContent": "Wybierz czas trwania certyfikatu, który chcesz utworzyć",
- "vpncertDropdownLabel": "Wybierz czas trwania",
- "vpncertDropdownOneyearOption": "1 rok",
- "vpncertDropdownThreeyearOption": "3 lata",
- "vpncertDropdownTwoyearOption": "2 lata",
- "wednesday": "Środa",
- "whatIfCountry": "Kraj/region",
- "whatIfCountryInfo": "Kraj/region, z której loguje się użytkownik.",
- "whatIfDevicePlatformInfo": "Platforma urządzeń, z której loguje się użytkownik.",
- "whatIfEnterIpAddress": "Wprowadź adres IP (np. 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "Określono nieprawidłowy adres IP.",
- "whatIfIpAddress": "Adres IP",
- "whatIfIpAddressInfo": "Adres IP, z której loguje się użytkownik.",
- "whatIfIpCountryInfoBoxText": "W przypadku używania adresu IP lub kraju/regionu oba pola będą wymagane i powinny być poprawnie mapowane na siebie.",
- "whatIfSelectCountry": "Wybierz kraj/region...",
- "whatIfSelectDevicePlatform": "Wybierz platformę urządzenia...",
- "whatIfSelectPrivateLink": "Wybierz łącze prywatne...",
- "whatIfSelectSignInRisk": "Wybierz ryzyko logowania...",
- "whatIfSignInRisk": "Ryzyko logowania",
- "whatIfSignInRiskInfo": "Poziom ryzyka skojarzony z logowaniem",
- "whatIfUnknownAreas": "Nieznane obszary",
- "windows365InfoBox": "Wybranie systemu Windows 365 wpłynie na połączenia z hostami sesji komputerów w chmurze oraz usługi Azure Virtual Desktop. Kliknij tutaj, aby dowiedzieć się więcej.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Tożsamości obciążeń (wersja zapoznawcza)",
- "workloadIdentitiesLicenseText": "Do edytowania tych zasad jest wymagana licencja premium P1 lub P2 tożsamości obciążenia.",
- "workloadIdentity": "Tożsamość obciążeń"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Nieobsługiwane",
- "supportEnding": "Zakończenie świadczenia pomocy technicznej",
- "supported": "Obsługiwane"
- }
- },
- "SecurityTemplate": {
- "aSR": "Zmniejszenie obszaru podatnego na ataki",
- "accountProtection": "Ochrona konta",
- "allDevices": "Wszystkie urządzenia",
- "antivirus": "Oprogramowanie antywirusowe",
- "antivirusReporting": "Raportowanie antywirusowe (wersja zapoznawcza)",
- "conditionalAccess": "Dostęp warunkowy",
- "deviceCompliance": "Zgodność urządzenia",
- "diskEncryption": "Szyfrowanie dysku",
- "eDR": "Wykrywanie i reagowanie dotyczące punktów końcowych",
- "ePM": "Zarządzanie uprawnieniami punktu końcowego",
- "firewall": "Zapora",
- "helpSupport": "Pomoc i obsługa techniczna",
- "setup": "Instalacja",
- "wdapt": "Microsoft Defender dla punktu końcowego"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Niepowodzenie",
- "hardReboot": "Ponowny rozruch sprzętowy",
- "retry": "Ponów próbę",
- "softReboot": "Ponowny rozruch systemowy",
- "success": "Powodzenie"
- },
- "Columns": {
- "codeType": "Typ kodu",
- "returnCode": "Kod powrotny"
- },
- "bladeTitle": "Kody powrotne",
- "gridAriaLabel": "Kody powrotne",
- "header": "Określ kody powrotne w celu wskazania zachowania po instalacji:",
- "onAddAnnounceMessage": "Kod powrotny dla dodanego elementu {0} z {1}",
- "onDeleteSuccess": "Kod powrotny {0} — usunięto pomyślnie",
- "returnCodeAlreadyUsedValidation": "Kod powrotny jest już używany.",
- "returnCodeMustBeIntegerValidation": "Kod powrotny powinien być liczbą całkowitą.",
- "returnCodeShouldBeAtLeast": "Kod powrotny powinien wynosić co najmniej {0}.",
- "returnCodeShouldBeAtMost": "Kod powrotny powinien wynosić co najwyżej {0}.",
- "selectorLabel": "Kody powrotne"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabski",
- "bulgarian": "Bułgarski",
- "chineseSimplified": "Chiński (uproszczony)",
- "chineseTraditional": "Chiński (tradycyjny)",
- "croatian": "Chorwacki",
- "czech": "Czeski",
- "danish": "Duński",
- "dutch": "Holenderski",
- "englishUK": "Angielski (Zjednoczone Królestwo)",
- "englishUS": "Angielski (Stany Zjednoczone)",
- "estonian": "Estoński",
- "finnish": "Fiński",
- "frenchCanada": "Francuski (Kanada)",
- "frenchFrance": "Francuski (Francja)",
- "german": "Niemiecki",
- "greek": "Grecki",
- "hebrew": "Hebrajski",
- "hungarian": "Węgierski",
- "italian": "Włoski",
- "japanese": "Japoński",
- "korean": "Koreański",
- "latvian": "Łotewski",
- "lithuanian": "Litewski",
- "norwegian": "Norweski, Bokmål",
- "polish": "Polski",
- "portugueseBrazil": "Portugalski (Brazylia)",
- "portuguesePortugal": "Portugalski (Portugalia)",
- "romanian": "Rumuński",
- "russian": "Rosyjski",
- "serbian": "Serbski",
- "slovak": "Słowacki",
- "slovenian": "Słoweński",
- "spanishMexico": "Hiszpański (Meksyk)",
- "spanishSpain": "Hiszpański (Hiszpania)",
- "swedish": "Szwedzki",
- "thai": "Tajlandia",
- "turkish": "Turecki",
- "ukrainian": "Ukraiński"
- },
- "Summary": {
- "placeholder": "Wybierz komunikat powiadomienia z lewej strony, aby wyświetlić podgląd zawartości."
- },
- "companyContact": "Pokaż informacje kontaktowe",
- "companyLogo": "Pokaż logo firmy",
- "companyName": "Pokaż nazwę firmy",
- "createEditDescription": "Utwórz lub edytuj szablony powiadomienia.",
- "createMessage": "Utwórz wiadomość",
- "deviceDetails": "Pokaż szczegóły urządzenia",
- "deviceDetailsInfoBox": "To ustawienie jest domyślnie wyłączone, ponieważ pobieranie szczegółów urządzenia może spowodować opóźnienie odbierania wiadomości e-mail z powiadomieniami.",
- "editImpactInfo": "Edycja tego szablonu komunikatów z powiadomieniem będzie miała wpływ na wszystkie zasady korzystającego z tego szablonu.",
- "editMessage": "Edytuj wiadomość",
- "email": "wiadomość e-mail",
- "emailFooterTitle": "Stopka wiadomość e-mail",
- "emailHeaderFooterInfo": "Ustawienia nagłówka i stopki wiadomości e-mail dla powiadomień e-mail zależą od ustawień dostosowywania w węźle administratora dzierżawy w programie Endpoint Manager.",
- "emailHeaderTitle": "Nagłówek wiadomości e-mail",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Konfiguruj ustawienia dostosowywania",
- "formSubTitle": "Tworzenie lub modyfikowanie wiadomości e-mail z powiadomieniem",
- "headerFooterSettingsTab": "Ustawienia nagłówka i stopki",
- "imgPreview": "Podgląd obrazu",
- "infotext": "Wybierz komunikat powiadomienia. Aby utworzyć nowe powiadomienie, przejdź do obszaru Powiadomienie w sekcji Zarządzaj obciążenia Ustaw zgodność urządzenia.",
- "iwLink": "Pokaż link do witryny internetowej portalu firmy",
- "listEmpty": "Brak szablonów komunikatów.",
- "listEmptySelectOnly": "Brak szablonów komunikatów. Aby utworzyć nowe powiadomienie, przejdź do obszaru Powiadomienia w sekcji Zarządzanie obciążenia Ustaw zgodność urządzenia.",
- "listSubTitle": "Lista szablonów powiadomień",
- "listTitle": "Szablony wiadomości z powiadomieniami",
- "localizedNotificationMessageTemplates": "Zlokalizowane szablony wiadomości z powiadomieniami",
- "messageAssigned": "Nie można usunąć tego szablonu komunikatu, ponieważ jest on aktualnie używany przez co najmniej jedne zasady zgodności.",
- "messageCapitalized": "Szablon komunikatu z powiadomieniem",
- "messageLowercase": "szablon komunikatu z powiadomieniem",
- "missingDefaultError": "Wybierz szablon domyślny",
- "notificationMessageTemplates": "Szablony wiadomości z powiadomieniami",
- "rowValidationError": "Wymagany jest co najmniej jeden szablon wiadomości",
- "selectDescription": "Wybierz powiadomienie. Aby utworzyć nowe powiadomienie, przejdź do obszaru Powiadomienia w sekcji zarządzania obciążenia Ustaw zgodność urządzenia.",
- "tenantValueText": "Wartość dzierżawy",
- "testEmailLabel": "Wyślij podgląd wiadomości e-mail",
- "localeLabel": "Ustawienia regionalne",
- "isDefaultLocale": "Domyślne"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Liczba dni oczekiwania przed wymuszeniem ponownego uruchomienia"
- },
"Description": {
"label": "Opis"
},
+ "FeatureDeploymentSettings": {
+ "header": "Ustawienia wdrażania funkcji"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Ta funkcja nie może zmienić wersji urządzenia na starszą.",
+ "label": "Aktualizacja funkcji do wdrożenia"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Ostateczna dostępność grupy"
+ },
+ "GradualRolloutInterval": {
+ "label": "Dni między grupami"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Dostępność pierwszej grupy"
+ },
"Name": {
"label": "Nazwa"
},
- "QualityUpdateRelease": {
- "label": "Przyspiesz instalację aktualizacji dotyczących jakości, jeśli wersja systemu operacyjnego urządzenia jest mniejsza niż:"
- },
- "bladeTitle": "Aktualizacje dotyczące jakości systemu Windows 10 i nowszych (wersja zapoznawcza)",
- "loadError": "Ładowanie nie powiodło się."
+ "OptionalUpdate": {
+ "label": "Aktualizacja wymagana lub opcjonalna"
+ },
+ "RolloutOptions": {
+ "label": "Opcje wprowadzania"
+ },
+ "RolloutSettings": {
+ "header": "Kiedy chcesz udostępnić aktualizację w usłudze Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Konfiguruj tagi zakresu dla tych zasad."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "Pierwsza dostępna data"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Wyłączono",
+ "enabled": "Włączono",
+ "infoBalloonContent": "Określ, czy zainstalować najnowszą aktualizację funkcji systemu Windows 10 na urządzeniach, które nie kwalifikują się do instalacji systemu Windows 11",
+ "label": "Jeśli urządzenie nie kwalifikuje się do uruchomienia systemu Windows 11, zainstaluj najnowszą aktualizację funkcji systemu Windows 10",
+ "notApplicable": "Nie dotyczy",
+ "summaryLabel": "Instalowanie systemu Windows 10 na urządzeniach, które nie kwalifikują się do uruchomienia systemu Windows 11"
+ },
+ "bladeTitle": "Wdrożenia aktualizacji funkcji",
+ "deploymentSettingsTitle": "Ustawienia wdrożenia",
+ "loadError": "Ładowanie nie powiodło się!",
+ "windows11EULA": "Zaznaczając tę opcję aktualizacji funkcji do wdrożenia, wyrażasz zgodę na to, że podczas stosowania tego systemu operacyjnego na urządzeniu (1) zakupiono odpowiednią licencję systemu Windows w ramach licencjonowania zbiorowego lub (2) że masz upoważnienie do nabywania praw i zaciągania zobowiązań w imieniu swojej organizacji i akceptujesz w jej imieniu odpowiednie postanowienia licencyjne dotyczące oprogramowania firmy Microsoft, które można znaleźć tutaj {0}."
},
+ "Notifications": {
+ "deploymentSaved": "Zapisano „{0}”.",
+ "newFeatureUpdateDeploymentCreated": "Utworzono nowe wdrożenie aktualizacji funkcji."
+ },
"TabName": {
- "qualityUpdateSettings": "Ustawienia"
+ "deploymentSettings": "Ustawienia wdrożenia",
+ "groupAssignmentSettings": "Przypisania",
+ "scopeSettings": "Tagi zakresu"
},
- "infoBoxText": "Jedyną obecnie dostępną dedykowaną kontrolą aktualizacji dotyczącej jakości poza istniejącymi zasadami pierścieni aktualizacji systemu Windows 10 i nowszych jest możliwość przyspieszenia aktualizacji dotyczących jakości dla urządzeń, które są poza określonym poziomem poprawek. Dodatkowe kontrole będą dostępne w przyszłości.",
- "licenseLearnMoreText": "Dowiedz się więcej o wymaganiach wstępnych i zasadach aktualizacji dotyczących jakości.",
- "licenseWarningBoxText": "Tworzenie zasad aktualizacji dotyczących jakości wymaga określonego licencjonowania.",
- "warningBoxText": "Przyspieszanie aktualizacji oprogramowania może skrócić czas do uzyskania zgodności w razie potrzeby, ale ma większy wpływ na produktywność użytkowników końcowych. Znacznie wzrasta prawdopodobieństwo wymuszonych ponownych uruchomień w godzinach pracy użytkowników."
+ "gradualRolloutLicenseWarning": "Ta możliwość wymaga określonego licencjonowania.",
+ "gradualRolloutLicenseWarningEdit": "Ta możliwość może być nadal używana i konfigurowana do czasu zapisania zasad bez wybrania tej możliwości.",
+ "licenseLearnMoreText": "Dowiedz się więcej o wymaganiach wstępnych i zasadach aktualizacji funkcji.",
+ "optionalUpdateWarning": "Opcjonalna jest dostępna tylko dla aktualizacji systemu Windows 11",
+ "profileNameWarning": "Nazwa powinna mieć mniej niż 64 znaków",
+ "specificLicensingRequired": "Niektóre wybrane możliwości wymagają określonego licencjonowania."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64-bitowa",
- "thirtyTwoBit": "32-bitowa"
- },
- "TACSettings": {
- "edgeSettings": "Ustawienia konfiguracji przeglądarki Microsoft Edge",
- "edgeWindowsDataProtectionSettings": "Przeglądarka Edge (Windows) — ustawienia ochrony danych — wersja zapoznawcza",
- "edgeWindowsSettings": "Przeglądarka Edge (Windows) — ustawienia konfiguracji — wersja zapoznawcza",
- "generalAppConfig": "Ogólna konfiguracja aplikacji",
- "generalSettings": "Ogólne ustawienia konfiguracji",
- "outlookSMIMEConfig": "Ustawienia S/MIME programu Outlook",
- "outlookSettings": "Ustawienia konfiguracji programu Outlook",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Dodaj granicę sieci",
- "addNetworkBoundaryButton": "Dodaj granicę sieci...",
- "allowWindowsSearch": "Zezwalaj funkcji Windows Search na przeszukiwanie zaszyfrowanych danych firmowych i aplikacji ze Sklepu",
- "authoritativeIpRanges": "Lista zakresów adresów IP przedsiębiorstwa jest autorytatywna (nie wykrywaj automatycznie)",
- "authoritativeProxyServers": "Lista serwerów proxy przedsiębiorstwa jest autorytatywna (nie wykrywaj automatycznie)",
- "boundaryType": "Typ granicy",
- "cloudResources": "Zasoby w chmurze",
- "corporateIdentity": "Tożsamość firmowa",
- "dataRecoveryCert": "Przekaż certyfikat agenta odzyskiwania danych (DRA, Data Recovery Agent), aby umożliwić odzyskiwanie zaszyfrowanych danych",
- "editNetworkBoundary": "Edytuj granicę sieci",
- "enrollmentState": "Stan rejestracji",
- "iPv4Ranges": "Zakresy adresów IPv4",
- "iPv6Ranges": "Zakresy adresów IPv6",
- "internalProxyServers": "Wewnętrzne serwery proxy",
- "maxInactivityTime": "Maksymalny czas (w minutach) bezczynności urządzenia, po którym urządzenie zostanie zablokowane przy użyciu kodu PIN lub hasła",
- "maxPasswordAttempts": "Liczba dozwolonych niepowodzeń uwierzytelniania, po przekroczeniu której urządzenie zostanie wyczyszczone",
- "mdmDiscoveryUrl": "Adres URL odnajdywania zarządzania urządzeniami przenośnymi",
- "mdmRequiredSettingsInfo": "Te zasady mają zastosowanie tylko do systemu Windows 10 Anniversary Edition i nowszych wersji. Te zasady używają rozwiązania Windows Information Protection (WIP) w celu zastosowania ochrony.",
- "minimumPinLength": "Ustaw minimalną wymaganą liczbę znaków kodu PIN",
- "name": "Nazwa",
- "networkBoundariesGridEmptyText": "Wszystkie dodane granice sieci zostaną tutaj wyświetlone",
- "networkBoundary": "Granica sieci",
- "networkDomainNames": "Domeny sieciowe",
- "neutralResources": "Neutralne zasoby",
- "passportForWork": "Użyj usługi Windows Hello dla firm jako metody logowania się do systemu Windows",
- "pinExpiration": "Określ czas (w dniach), przez który użytkownik może używać kodu PIN, zanim jego zmiana będzie wymagana przez system",
- "pinHistory": "Określ liczbę ostatnich numerów PIN skojarzonych z kontem użytkownika, które nie mogą zostać ponownie użyte",
- "pinLowercaseLetters": "Skonfiguruj użycie małych liter w kodzie PIN usługi Windows Hello dla firm",
- "pinSpecialCharacters": "Skonfiguruj użycie znaków specjalnych w kodzie PIN usługi Windows Hello dla firm",
- "pinUppercaseLetters": "Skonfiguruj użycie wielkich liter w kodzie PIN usługi Windows Hello dla firm",
- "protectUnderLock": "Blokuj dostęp aplikacji do danych firmowych, gdy urządzenie jest zablokowane. Dotyczy tylko systemu Windows 10 Mobile",
- "protectedDomainNames": "Domeny chronione",
- "proxyServers": "Serwery proxy",
- "requireAppPin": "Wyłącz numer PIN aplikacji, gdy zarządzany jest numer PIN urządzenia",
- "requiredSettings": "Wymagane ustawienia",
- "requiredSettingsInfo": "Zmiana zakresu lub usunięcie tych zasad spowoduje odszyfrowanie danych firmowych.",
- "revokeOnMdmHandoff": "Odwołaj dostęp do chronionych danych po zarejestrowaniu urządzenia w usłudze MDM",
- "revokeOnUnenroll": "Odwołaj klucze szyfrowania po wyrejestrowaniu",
- "rmsTemplateForEdp": "Określ identyfikator szablonu do użycia z usługą Azure RMS",
- "showWipIcon": "Pokaż ikonę ochrony danych przedsiębiorstwa",
- "type": "Typ",
- "useRmsForWip": "Użyj usługi Azure RMS na potrzeby funkcji WIP",
- "value": "Wartość",
- "weRequiredSettingsInfo": "Te zasady mają zastosowanie tylko do aktualizacji systemu Windows 10 dla twórców i nowszych wersji. Te zasady używają rozwiązania Windows Information Protection (WIP) i zarządzania aplikacjami mobilnymi systemu Windows w celu zastosowania ochrony.",
- "wipProtectionMode": "Tryb funkcji Windows Information Protection",
- "withEnrollment": "Z rejestracją",
- "withoutEnrollment": "Bez rejestracji"
+ "Platform": {
+ "all": "Wszystkie",
+ "android": "Administrator urządzeń z systemem Android",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "System Android dla firm",
+ "common": "Wspólne",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS i Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Nieznany",
+ "unsupported": "Nieobsługiwane",
+ "windows": "Windows",
+ "windows10": "Windows 10 i nowsze",
+ "windows10CM": "Windows 10 i nowsze (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 i nowsze",
+ "windows8And10": "Windows 8 i 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 i nowsze",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 i Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 i nowsze (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Komputer z systemem Windows"
+ },
+ "InstallIntent": {
+ "available": "Dostępne dla zarejestrowanych urządzeń",
+ "availableWithoutEnrollment": "Dostępne z rejestracją lub bez niej",
+ "required": "Wymagane",
+ "uninstall": "Odinstaluj"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filtruj",
+ "noFilters": "Brak"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Autor",
- "template": "Nazwa szablonu"
- },
- "Row": {
- "ariaLabel": "wiersz {0} z {1} kolumny {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Rozpocznij od podstaw i wybierz odpowiednie właściwości z biblioteki dostępnych właściwości spisu"
- },
- "SettingsCatalog": {
- "subtitle": "Zacznij od zera i wybierz żądane ustawienia z biblioteki dostępnych ustawień",
- "title": "Wykaz ustawień"
- },
- "Templates": {
- "subtitle": "Szablony zawierają grupy ustawień uporządkowane według funkcji. Użyj szablonu, jeśli nie chcesz ręcznie tworzyć zasad lub chcesz skonfigurować urządzenia pod kątem dostępu do sieci firmowych, na przykład skonfigurować sieć WiFi lub VPN.",
- "title": "Szablony"
- },
- "noData": "Nie znaleziono żadnych szablonów zasad"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Klient stacjonarny usługi Project Online",
- "visioProRetail": "Visio Online (plan 2)"
- },
- "Countries": {
- "ae": "Zjednoczone Emiraty Arabskie",
- "ag": "Antigua i Barbuda",
- "ai": "Anguilla",
- "al": "Albania",
- "am": "Armenia",
- "ao": "Angola",
- "ar": "Argentyna",
- "at": "Austria",
- "au": "Australia",
- "az": "Azerbejdżan",
- "bb": "Barbados",
- "be": "Belgia",
- "bf": "Burkina Faso",
- "bg": "Bułgaria",
- "bh": "Bahrajn",
- "bj": "Benin",
- "bm": "Bermudy",
- "bn": "Brunei",
- "bo": "Boliwia",
- "br": "Brazylia",
- "bs": "Bahamy",
- "bt": "Bhutan",
- "bw": "Botswana",
- "by": "Białoruś",
- "bz": "Belize",
- "ca": "Kanada",
- "cg": "Republika Konga",
- "ch": "Szwajcaria",
- "cl": "Chile",
- "cn": "Chiny",
- "co": "Kolumbia",
- "cr": "Kostaryka",
- "cv": "Wyspy Zielonego Przylądka",
- "cy": "Cypr",
- "cz": "Czechy",
- "de": "Niemcy",
- "dk": "Dania",
- "dm": "Dominika",
- "do": "Dominikana",
- "dz": "Algieria",
- "ec": "Ekwador",
- "ee": "Estonia",
- "eg": "Egipt",
- "es": "Hiszpania",
- "fi": "Finlandia",
- "fj": "Fidżi",
- "fm": "Sfederowane Stany Mikronezji",
- "fr": "Francja",
- "gb": "Zjednoczone Królestwo",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Grecja",
- "gt": "Gwatemala",
- "gw": "Gwinea Bissau",
- "gy": "Gujana",
- "hk": "Hongkong SAR",
- "hn": "Honduras",
- "hr": "Chorwacja",
- "hu": "Węgry",
- "id": "Indonezja",
- "ie": "Irlandia",
- "il": "Izrael",
- "in": "Indie",
- "is": "Islandia",
- "it": "Włochy",
- "jm": "Jamajka",
- "jo": "Jordania",
- "jp": "Japonia",
- "ke": "Kenia",
- "kg": "Kirgistan",
- "kh": "Kambodża",
- "kn": "St. Kitts i Nevis",
- "kr": "Republika Korei",
- "kw": "Kuwejt",
- "ky": "Kajmany",
- "kz": "Kazachstan",
- "la": "Laotańska Republika Ludowo-Demokratyczna",
- "lb": "Liban",
- "lc": "Saint Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Litwa",
- "lu": "Luksemburg",
- "lv": "Łotwa",
- "md": "Republika Mołdawii",
- "mg": "Madagaskar",
- "mk": "Macedonia Północna",
- "ml": "Mali",
- "mn": "Mongolia",
- "mo": "Makau",
- "mr": "Mauretania",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Meksyk",
- "my": "Malezja",
- "mz": "Mozambik",
- "na": "Namibia",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nikaragua",
- "nl": "Holandia",
- "no": "Norwegia",
- "np": "Nepal",
- "nz": "Nowa Zelandia",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua Nowa Gwinea",
- "ph": "Filipiny",
- "pk": "Pakistan",
- "pl": "Polska",
- "pt": "Portugalia",
- "pw": "Palau",
- "py": "Paragwaj",
- "qa": "Katar",
- "ro": "Rumunia",
- "ru": "Rosja",
- "sa": "Arabia Saudyjska",
- "sb": "Wyspy Salomona",
- "sc": "Seszele",
- "se": "Szwecja",
- "sg": "Singapur",
- "si": "Słowenia",
- "sk": "Słowacja",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Surinam",
- "st": "Wyspy Świętego Tomasza i Książęca",
- "sv": "Salwador",
- "sz": "Suazi",
- "tc": "Turks i Caicos",
- "td": "Czad",
- "th": "Tajlandia",
- "tj": "Tadżykistan",
- "tm": "Turkmenistan",
- "tn": "Tunezja",
- "tr": "Turcja",
- "tt": "Trynidad i Tobago",
- "tw": "Tajwan",
- "tz": "Tanzania",
- "ua": "Ukraina",
- "ug": "Uganda",
- "us": "Stany Zjednoczone",
- "uy": "Urugwaj",
- "uz": "Uzbekistan",
- "vc": "Saint Vincent i Grenadyny",
- "ve": "Wenezuela",
- "vg": "Brytyjskie Wyspy Dziewicze",
- "vn": "Wietnam",
- "ye": "Jemen",
- "za": "Republika Południowej Afryki",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Bieżący kanał",
- "deferred": "Półroczny kanał dla przedsiębiorstw",
- "firstReleaseCurrent": "Bieżący kanał (wersja zapoznawcza)",
- "firstReleaseDeferred": "Półroczny kanał dla przedsiębiorstw (wersja zapoznawcza)",
- "monthlyEnterprise": "Miesięczny kanał dla przedsiębiorstw",
- "placeHolder": "Wybierz zasady"
- },
- "AppProtection": {
- "allAppTypes": "Dotyczy wszystkich typów aplikacji",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Aplikacje w ramach profilu programu Android for Work",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Aplikacje na dedykowanych urządzeniach Android dla przedsiębiorstw z trybem współdzielonym aplikacji Microsoft Entra",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Skojarzono aplikacje w przypadku użytkownika projektu open source systemu Android",
- "appsOnAndroidOpenSourceProjectUserless": "Bezużyteczne aplikacje w przypadku projektu open source systemu Android",
- "appsOnIntuneManagedDevices": "Aplikacje na urządzeniach zarządzanych przez usługę Intune",
- "appsOnUnmanagedDevices": "Aplikacje na urządzeniach niezarządzanych",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android i Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Niedostępne",
- "windows10PlatformLabel": "Windows 10 i nowsze",
- "withEnrollment": "Z rejestracją",
- "withoutEnrollment": "Bez rejestracji"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Rola wbudowana",
- "customCloudPCRole": "Niestandardowa rola systemu Windows 365",
- "customIntuneRole": "Niestandardowa rola usługi Intune",
- "customRole": "Rola niestandardowa"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "Element {0} jest uwzględniony w co najmniej jednym zestawie zasad. Jeśli usuniesz element {0}, nie będzie już można go przypisywać za pomocą tych zestawów zasad. Czy usunąć go mimo to?",
- "contentWithError": "Element {0} może być uwzględniony w co najmniej jednym zestawie zasad. Jeśli usuniesz element {0}, nie będzie już można go przypisywać za pomocą tych zestawów zasad. Czy usunąć go mimo to?",
- "header": "Czy na pewno chcesz usunąć to ograniczenie?"
- },
- "DeviceLimit": {
- "description": "Określ maksymalną liczbę urządzeń, które może zarejestrować użytkownik.",
- "header": "Ograniczenia limitu urządzeń",
- "info": "Określ liczbę urządzeń, które może zarejestrować każdy użytkownik."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Musi to być wartość 1.0 lub większa.",
- "android": "Wprowadź prawidłowy numer wersji. Przykłady: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Wprowadź prawidłowy numer wersji. Przykłady: 5.0, 5.1.1",
- "iOS": "Wprowadź prawidłowy numer wersji. Przykłady: 9.0, 10.0, 9.0.2",
- "mac": "Wprowadź prawidłowy numer wersji. Przykłady: 10, 10.10, 10.10.1",
- "min": "Wersja minimalna nie może być niższa niż {0}",
- "minMax": "Wersja minimalna nie może być większa niż wersja maksymalna.",
- "windows": "Musi to być wersja 10.0 lub nowsza. Pozostaw to pole puste, aby zezwolić na urządzenia w wersji 8.1",
- "windowsMobile": "Musi to być wersja 10.0 lub nowsza. Pozostaw to pole puste, aby zezwolić na urządzenia w wersji 8.1"
- },
- "allPlatformsBlocked": "Wszystkie platformy urządzeń są zablokowane. Zezwalaj na rejestrowanie platform, aby włączyć konfigurowanie platform.",
- "blockManufacturerPlaceHolder": "Nazwa producenta",
- "blockManufacturersHeader": "Zablokowani producenci",
- "cannotRestrict": "Ograniczenie nie jest obsługiwane",
- "configurationDescription": "Określ ograniczenia konfiguracji platformy, które muszą zostać spełnione w celu rejestracji urządzenia. Użyj zasad zgodności do ograniczenia urządzeń po rejestracji. Definiuj wersje w formacie główna.pomocnicza.kompilacja. Ograniczenia wersji mają zastosowanie tylko do urządzeń rejestrowanych przy użyciu Portalu firmy. Domyślnie usługa Intune klasyfikuje urządzenia jako będące własnością osobistą. Aby zaklasyfikować urządzenia jako będące własnością firmy, należy podjąć specjalną akcję.",
- "configurationDescriptionLabel": "Dowiedz się więcej o ustawianiu ograniczeń rejestracji",
- "configurations": "Konfiguruj platformy",
- "deviceManufacturer": "Producent urządzenia",
- "header": "Ograniczenia typu urządzeń",
- "info": "Zdefiniuj platformy, wersje i typy zarządzania dopuszczone do rejestracji.",
- "manufacturer": "Producent",
- "max": "Maks.",
- "maxVersion": "Maksymalna wersja",
- "min": "Minimum",
- "minVersion": "Minimalna wersja",
- "newPlatforms": "Dopuszczono nowe platformy. Rozważ aktualizację konfiguracji platform.",
- "personal": "Własność użytkownika",
- "platform": "Platforma",
- "platformDescription": "Możesz dopuścić rejestrację następujących platform. Blokuj tylko platformy, których nie będziesz obsługiwać. Dopuszczone platformy można skonfigurować z dodatkowymi ograniczeniami rejestracji.",
- "platformSettings": "Ustawienia platformy",
- "platforms": "Wybierz platformy",
- "platformsSelected": "Wybrane platformy: {0}",
- "type": "Typ",
- "versions": "wersje",
- "versionsRange": "Zezwalaj na minimalny/maksymalny zakres:",
- "windowsTooltip": "Ogranicza rejestrację za pośrednictwem zarządzania urządzeniami przenośnymi. Nie ogranicza instalacji agenta komputera. Obsługiwane są tylko wersje systemów Windows 10 i Windows 11. Pozostaw puste wersje, aby zezwolić na korzystanie z systemu Windows 8.1."
- },
- "Priority": {
- "saved": "Pomyślnie zapisano priorytety ograniczeń."
- },
- "Row": {
- "announce": "Priorytet: {0}, nazwa: {1}, przypisano: {2}"
- },
- "Table": {
- "deployed": "Wdrożone",
- "name": "Nazwa",
- "priority": "Priorytet"
- },
- "Type": {
- "limit": "Ograniczenie limitu urządzeń",
- "type": "Ograniczenie typu urządzeń"
- },
- "allUsers": "Wszyscy użytkownicy",
- "androidRestrictions": "Ograniczenia systemu Android",
- "create": "Utwórz ograniczenie",
- "defaultLimitDescription": "To jest domyślne ograniczenie limitu urządzeń stosowane z najniższym priorytetem dla wszystkich użytkowników niezależnie od członkostwa w grupie.",
- "defaultTypeDescription": "To jest domyślne ograniczenie typu urządzenia stosowane z najniższym priorytetem dla wszystkich użytkowników niezależnie od członkostwa w grupie.",
- "defaultWhfbDescription": "To jest domyślna konfiguracja funkcji Windows Hello dla firm stosowana z najniższym priorytetem dla wszystkich użytkowników niezależnie od członkostwa w grupie.",
- "deleteMessage": "Na użytkowników, których to dotyczy, zostanie nałożone przypisane ograniczenie o kolejnym najwyższym priorytecie lub domyślne ograniczenie, jeśli żadne ograniczenie nie zostało przypisane.",
- "deleteTitle": "Czy na pewno chcesz usunąć ograniczenie {0}?",
- "descriptionHint": "Krótki akapit z opisem użycia poziomu ograniczeń określanego przez ustawienia ograniczeń w firmie.",
- "edit": "Edytuj ograniczenie",
- "info": "Urządzenie musi być zgodne z ograniczeniami rejestracji o najwyższym priorytecie przypisanymi do jego użytkownika. Możesz przeciągać ograniczenia urządzenia, aby zmieniać ich priorytet. Ograniczenia domyślne mają najniższy priorytet dla wszystkich użytkowników i służą do zarządzania rejestracjami bez użytkowników. Ograniczenia domyślne można edytować, ale nie można ich usuwać.",
- "iosRestrictions": "Ograniczenia systemu iOS",
- "mDM": "MDM",
- "macRestrictions": "Ograniczenia systemu MacOS",
- "maxVersion": "Wersja maksymalna",
- "minVersion": "Wersja minimalna",
- "nameHint": "To będzie główny atrybut widoczny w celu identyfikacji zestawu ograniczeń.",
- "noAssignmentsStatusBar": "Przypisz ograniczenie do co najmniej jednej grupy. Kliknij pozycję Właściwości.",
- "nonAdminForbiddenCreateError": "Aby tworzyć, edytować lub usuwać ograniczenia, musisz posiadać uprawnienia usługi Intune lub administratora globalnego.",
- "nonAdminForbiddenEdit": "Aby edytować ograniczenia, musisz być administratorem.",
- "notFound": "Nie znaleziono ograniczenia. Być może zostało już usunięte.",
- "personallyOwned": "Urządzenia osobiste",
- "restriction": "Ograniczenie",
- "restrictionLowerCase": "ograniczenie",
- "restrictionType": "Typ ograniczenia",
- "selectType": "Wybierz typ ograniczenia",
- "selectValidation": "Wybierz platformę",
- "typeHint": "Wybierz opcję Ograniczenie typu urządzeń, aby ograniczyć właściwości urządzeń. Wybierz opcję Ograniczenie limitu urządzeń, aby ograniczyć liczbę urządzeń na użytkownika.",
- "typeRequired": "Wymagany jest typ ograniczenia.",
- "winPhoneRestrictions": "Ograniczenia systemu Windows Phone",
- "windowsECv1Info": "Starszych ograniczeń rejestracji nie można edytować ani zmieniać ich priorytetów, tylko usuwać.",
- "windowsECv2Info": "Możesz określić priorytety ograniczeń rejestracji, przeciągając je i upuszczając. Wyświetl ograniczenia domyślne i wstępnie skonfigurowane poniżej. Wszystkie nowe ograniczenia rejestracji będą miały wyższy priorytet niż domyślne i wstępnie skonfigurowane ograniczenia.",
- "windowsRestrictions": "Ograniczenia systemu Windows",
- "windowsRestrictionsPreview": "Ograniczenia systemu Windows oparte na filtrach (wersja zapoznawcza)"
- },
- "InstallContextType": {
- "device": "Urządzenie",
- "deviceContext": "Kontekst urządzenia",
- "user": "Użytkownik",
- "userContext": "Kontekst użytkownika"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Opis",
- "placeholder": "Wprowadź opis"
- },
- "NameTextBox": {
- "label": "Nazwa",
- "placeholder": "Wprowadź nazwę"
- },
- "PublisherTextBox": {
- "label": "Wydawca",
- "placeholder": "Wprowadź wydawcę"
- },
- "VersionTextBox": {
- "label": "Wersja"
- },
- "headerDescription": "Utwórz nowy niestandardowy pakiet skryptu na podstawie napisanych przez siebie skryptów wykrywania i korygowania."
- },
- "ScopeTags": {
- "headerDescription": "Wybierz co najmniej jedną grupę, aby przypisać pakiet skryptów."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Skrypt wykrywania",
- "placeholder": "Tekst skryptu wejściowego",
- "requiredValidationMessage": "Wprowadź skrypt wykrywania"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Wymuszaj sprawdzanie podpisu skryptu"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Uruchom ten skrypt, używając poświadczeń zalogowanego użytkownika"
- },
- "RemediationScript": {
- "infoBox": "Ten skrypt zostanie uruchomiony w trybie tylko wykrywania, ponieważ nie ma skryptu korygującego."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Skrypt korygujący",
- "placeholder": "Tekst skryptu wejściowego"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Uruchom skrypt w 64-bitowym programie PowerShell"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Nieprawidłowy skrypt. Co najmniej jeden znak użyty w skrypcie jest nieprawidłowy."
- },
- "headerDescription": "Utwórz niestandardowy pakiet skryptów na podstawie napisanych przez siebie skryptów. Domyślnie skrypty będą uruchamiane na przypisanych urządzeniach każdego dnia.",
- "infoBox": "Ten skrypt jest tylko do odczytu. Niektóre ustawienia dla tego skryptu mogą być wyłączone."
- },
- "title": "Utwórz niestandardowy skrypt",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Interwał",
- "time": "Data i godzina"
- },
- "Interval": {
- "day": "Powtarzane codziennie",
- "days": "Powtarzane co {0} dni",
- "hour": "Powtarzane co godzinę",
- "hours": "Powtarzane co {0} godz.",
- "month": "Powtarzane co miesiąc",
- "months": "Powtarzane co {0} mies.",
- "week": "Powtarzane co tydzień",
- "weeks": "Powtarzane co {0} tyg."
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) {1}",
- "withDate": "{0} {1}"
- }
- }
- },
- "Edit": {
- "title": "Edycja — {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Dozwolone adresy URL",
- "tooltip": "Określ witryny, do których użytkownicy mogą uzyskiwać dostęp, gdy są w kontekście roboczym. Żadne inne witryny nie będą dozwolone. Możesz zdecydować się skonfigurować listę dozwolonych witryn albo listę zablokowanych witryn, ale nie możesz skonfigurować ich obu jednocześnie. "
- },
- "ApplicationProxyRedirection": {
- "header": "Serwer proxy aplikacji",
- "title": "Przekierowanie serwera proxy aplikacji",
- "tooltip": "Włącz przekierowanie serwera proxy aplikacji, aby zapewnić użytkownikom dostęp do linków firmowych i lokalnych aplikacji internetowych."
- },
- "BlockedURLs": {
- "title": "Zablokowane adresy URL",
- "tooltip": "Określ witryny, które są blokowane dla użytkowników, gdy są w kontekście roboczym. Wszystkie inne witryny będą dozwolone. Możesz zdecydować się skonfigurować listę dozwolonych witryn albo listę zablokowanych witryn, ale nie możesz skonfigurować ich obu jednocześnie. "
- },
- "Bookmarks": {
- "header": "Zarządzane zakładki",
- "tooltip": "Wprowadź dla użytkowników listę adresów URL z zakładkami, które będą dostępne podczas korzystania z przeglądarki Microsoft Edge w kontekście roboczym.",
- "uRL": "Adres URL"
- },
- "HomepageURL": {
- "header": "Zarządzana strona główna",
- "title": "Adres URL skrótu do strony głównej",
- "tooltip": "Skonfiguruj skrót do strony głównej, który będzie widoczny dla użytkowników jako pierwsza ikona poniżej paska wyszukiwania, gdy otworzą nową kartę w przeglądarce Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Przekieruj witryny z ograniczeniami do kontekstu osobistego",
- "tooltip": "Skonfiguruj, czy użytkownicy powinni mieć możliwość przechodzenia do swojego osobistego kontekstu, aby otwierać witryny z ograniczeniami."
- }
- },
- "BooleanActions": {
- "allow": "Zezwalaj",
- "block": "Blokuj",
- "configured": "Skonfigurowane",
- "disable": "Wyłącz",
- "dontRequire": "Nie wymagaj",
- "enable": "Włącz",
- "hide": "Ukryj",
- "limit": "Limit",
- "notConfigured": "Nieskonfigurowane",
- "require": "Wymagaj",
- "show": "Pokaż",
- "yes": "Tak"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Udostępnij użytkownikom jako aktualizację opcjonalną",
- "optionalValue": "Opcjonalna",
- "required": "Udostępnij użytkownikom jako aktualizację wymaganą",
- "requiredValue": "Wymagana"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 dzień",
- "twoDays": "2 dni",
- "zeroDays": "0 dni"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Przegląd"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Wyszukaj według urządzenia, użytkownika lub wersji aktualizacji dotyczącej jakości."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Nie można załadować profili aktualizacji oprogramowania systemu iOS"
- }
- },
- "SummaryBlade": {
- "subtitle": "Profil aktualizacji systemu iOS",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profil"
- },
- "listLoadError": "Nie można załadować profili aktualizacji oprogramowania systemu iOS; spróbuj ponownie później",
- "lowercase": "Zasady aktualizacji systemu iOS",
- "uppercase": "Zasady aktualizacji systemu iOS"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Niestety, nie możemy nawiązać połączenia z firmą Apple w celu pobrania listy dostępnych wersji. Spróbuj ponownie później lub kontynuuj przy użyciu najnowszej wersji.",
- "latestUpdate": "Najnowsza aktualizacja",
- "noLongerSupported": "Wybrana wersja nie jest już obsługiwana",
- "olderVersionSelected": "Ponieważ wybrano starszą wersję, pamiętaj o zastosowaniu zasad ograniczania urządzeń, które opóźnią widoczność aktualizacji oprogramowania, aby urządzenia nie mogły przeprowadzić aktualizacji do najnowszej wersji.",
- "prefix": "Zainstaluj system iOS/iPadOS",
- "selectSupported": "Wybierz wersję aktualizacji obsługiwaną przez firmę Apple",
- "updateToInstall": "Aktualizacja do zainstalowania"
- },
- "Schedule": {
- "always": "Aktualizuj przy następnym meldowaniu",
- "duringTimeWindows": "Aktualizuj w zaplanowanym czasie",
- "header": "Domyślnie, gdy zasady aktualizacji są przypisane do urządzenia, usługa Intune wdraża najnowsze aktualizacje po zaewidencjonowaniu urządzenia. Możesz również zamiast tego utworzyć harmonogram tygodniowy z niestandardowymi terminami rozpoczęcia i zakończenia. Jeśli zdecydujesz się zaktualizujesz poza zaplanowanym terminem, usługa Intune nie wdroży aktualizacji do momentu zakończenia zaplanowanego terminu.",
- "infoBalloon": "Kiedy nastąpi aktualizacja. Aby zaplanować aktualizacje w trakcie zaplanowanych godzin lub poza nimi, wymagane są dodatkowe dane wejściowe.",
- "label": "Typ harmonogramu",
- "outsideActiveHours": "Aktualizuj poza godzinami aktywnego użytkowania (starsza wersja)",
- "outsideTimeWindows": "Aktualizuj poza zaplanowanym czasem",
- "timeWindow": "Przedział czasu",
- "timeZone": "Strefa czasowa",
- "title": "Aktualizuj ustawienia harmonogramu zasad:",
- "weekly": "Harmonogram tygodniowy",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "Wersja systemu iOS/iPadOS do zainstalowania na urządzeniach w czasie aktualizacji.",
- "label": "Wybierz wersję do zainstalowania"
- },
- "header": "Utwórz profil, aby wymusić automatyczne instalowanie najnowszych aktualizacji systemu iOS/iPadOS przez przypisane urządzenia. Te ustawienia określają sposób i czas wdrażania aktualizacji oprogramowania. Ten profil nie uniemożliwia użytkownikom ręcznego aktualizowania systemu operacyjnego, czemu można zapobiegać przez nawet 90 dni, używając zasad ograniczania konfiguracji urządzenia. Aktualizacje będą stosowane tylko na urządzeniach nadzorowanych.",
- "notAvailable": "Brak"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Brak zasad aktualizacji systemu iOS do wyświetlenia",
- "macOsUpdates": "Brak zasad aktualizacji oprogramowania macOS do wyświetlenia",
- "windowsUpdates": "Brak pierścieni aktualizacji dla systemu Windows 10 i nowszego do wyświetlenia."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Nazwa urządzenia",
- "deviceUpdateStatus": "Stan aktualizacji urządzenia",
- "lastUpdated": "Ostatnia aktualizacja",
- "osVersion": "Wersja systemu operacyjnego",
- "userPrincipalName": "Nazwa użytkownika"
- },
- "maximumOSVersionFilter": "Maksymalna wersja systemu operacyjnego",
- "minimumOSVersionFilter": "Minimalna wersja systemu operacyjnego",
- "noData": "Brak danych do wyświetlenia",
- "searchBoxPlaceholder": "Wyszukaj według nazwy urządzenia, nazwy użytkownika lub wersji systemu operacyjnego",
- "title": "Podsumowanie kont dla urządzeń z systemem macOS"
- },
- "Category": {
- "configurationDataFile": "Plik danych konfiguracji",
- "critical": "Krytyczne",
- "firmware": "Oprogramowanie układowe",
- "other": "Inne"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Ostatnia aktualizacja",
- "successfulUpdateCount": "Aktualizacje pomyślne zostały wdrożone",
- "totalUpdateCount": "Łączna liczba wdrożonych aktualizacji",
- "updateCategory": "Kategoria aktualizacji",
- "updateCategoryStatus": "Stan kategorii aktualizacji"
- },
- "noData": "Brak danych do wyświetlenia"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Nie można załadować profili aktualizacji oprogramowania systemu macOS"
- }
- },
- "State": {
- "available": "Dostępne",
- "commandFailed": "Wykonanie polecenia nie powiodło się",
- "downloadFailed": "Pobieranie nie powiodło się",
- "downloadInsufficientNetwork": "Sieć niewystarczająca dla pobierania",
- "downloadInsufficientPower": "Poziom energii za niski dla pobierania",
- "downloadInsufficientSpace": "Ilość miejsca niewystarczająca dla pobierania",
- "downloaded": "Pobrano",
- "downloading": "Pobieranie",
- "idle": "Bezczynny",
- "installFailed": "Instalacja nie powiodła się",
- "installInsufficientPower": "Poziom energii niewystarczający dla instalacji",
- "installInsufficientSpace": "Ilość miejsca niewystarczająca dla instalacji",
- "installing": "Instalowanie",
- "scheduled": "Zaplanowane",
- "success": "Powodzenie",
- "unknown": "Nieznany"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Ostatnia aktualizacja",
- "updateName": "Nazwa aktualizacji",
- "updateStatus": "Stan aktualizacji",
- "version": "Wersja"
- },
- "noData": "Brak danych do wyświetlenia",
- "searchBoxPlaceholder": "Wyszukaj według wersji lub nazwy aktualizacji"
- },
- "SummaryBlade": {
- "subtitle": "Profil aktualizacji systemu macOS",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profil"
- },
- "error": "Błąd",
- "errorOrErrors": "Błędy",
- "errors": "Błędy",
- "listLoadError": "Nie można załadować profili aktualizacji oprogramowania systemu macOS; spróbuj ponownie później",
- "lowercase": "Zasady aktualizacji systemu macOS",
- "other": "Inne",
- "subtitle": "Aktualizacja oprogramowania systemu MacOS",
- "upToDate": "Aktualne",
- "uppercase": "Zasady aktualizacji systemu macOS"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Spróbuj ponownie później",
- "title": "Nie można usunąć pliku {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Spróbuj ponownie później"
- },
- "LoadConfigurationFailed": {
- "description": "Spróbuj ponownie później",
- "title": "Nie można załadować elementu {0}"
- },
- "idWrongFormat": "Podany identyfikator profilu nie ma oczekiwanego formatu."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "Należy wybrać co najmniej jedno okno czasu",
- "tooMany": "Można skonfigurować maksymalnie 20 okien czasu"
- }
- },
- "endDay": "Dzień zakończenia",
- "endTime": "Godzina zakończenia",
- "startDay": "Dzień rozpoczęcia",
- "startTime": "Godzina rozpoczęcia",
- "timeWindowError": "Wybierz przedział czasu obejmujący co najmniej jedną godzinę."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Nie można załadować profilów pierścienia aktualizacji dla systemu Windows 10 lub nowszego."
- }
- },
- "SummaryBlade": {
- "subtitle": "Pierścień aktualizacji dla systemu Windows 10 i nowszego",
- "title": "Windows Update dla Firm"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 i nowsze",
- "title": "Pierścień aktualizacji dla systemu Windows 10 i nowszego"
- },
- "listLoadError": "Nie można załadować profili pierścieni aktualizacji dla systemu Windows 10 i nowszego. Spróbuj ponownie później",
- "lowercase": "Pierścień aktualizacji",
- "uppercase": "Pierścień aktualizacji"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Aktualizuj ustawienia zasad",
- "updateRingSettings": "Aktualizuj ustawienia pierścienia"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Utwórz element {0}",
- "edit": "Edytuj element {0}"
- }
- },
- "notScannedYet": "Jeszcze nie skanowano",
- "outOfDateIosDevices": "Nieaktualne urządzenia z systemem iOS"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Ograniczenia dotyczące urządzenia (właściciel urządzenia)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "Sieć VPN",
"IosUpdate": "Zasady aktualizacji systemu iOS"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Równa się",
+ "greaterThan": "Większe niż",
+ "greaterThanOrEqualTo": "Większe niż lub równe",
+ "lessThan": "Mniej niż",
+ "lessThanOrEqualTo": "Mniejsze niż lub równe",
+ "notEqualTo": "Różne od"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Wymuś sprawdzanie podpisu skryptu i uruchom skrypt w trybie cichym",
+ "enforceSignatureCheckTooltip": "Wybierz opcję „Tak”, aby sprawdzić, czy skrypt jest podpisany przez zaufanego wydawcę, co pozwoli na uruchomienie skryptu bez wyświetlania ostrzeżeń ani monitów. Działanie skryptu nie będzie blokowane. Wybierz opcję „Nie” (domyślna), aby uruchomienie skryptu wymagało potwierdzenia użytkownika końcowego. Weryfikacja podpisu nie będzie wykonywana.",
+ "header": "Użyj niestandardowego skryptu wykrywania",
+ "runAs32Bit": "Uruchom skrypt jako proces 32-bitowy na klientach 64-bitowych",
+ "runAs32BitTooltip": "Wybierz opcję „Tak”, aby uruchomić skrypt w procesie 32-bitowym na klientach 64-bitowych. Wybierz opcję „Nie” (domyślna), aby uruchomić skrypt w procesie 64-bitowym na klientach 64-bitowych. Na klientach 32-bitowych skrypt jest uruchamiany w procesie 32-bitowym.",
+ "scriptContent": "Zawartość skryptu",
+ "scriptFile": "Plik skryptu",
+ "scriptFileNotSelectedValidation": "Nie wybrano pliku skryptu.",
+ "scriptFileTooltip": "Wybierz skrypt programu PowerShell, który będzie wykrywać obecność aplikacji na kliencie. Aplikacja zostanie wykryta, gdy skrypt zwróci kod zakończenia o wartości 0 i zapisze wartość ciągu w wyjściu STDOUT.",
+ "scriptSizeLimitValidation": "Rozmiar skryptu wykrywania przekracza maksymalny dozwolony rozmiar. Rozwiąż ten problem, zmniejszając rozmiar skryptu wykrywania."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Data utworzenia",
+ "dateModified": "Data modyfikacji",
+ "doesNotExist": "Plik lub folder nie istnieje",
+ "fileOrFolderExists": "Plik lub folder istnieje",
+ "sizeInMB": "Rozmiar w MB",
+ "version": "Ciąg (wersja)"
+ },
+ "associatedWith32Bit": "Skojarzone z aplikacją 32-bitową na klientach 64-bitowych",
+ "associatedWith32BitTooltip": "Wybierz opcję „Tak”, aby rozwijać zmienne środowiskowe ścieżki w kontekście 32-bitowym na klientach 64-bitowych. Wybierz opcję „Nie” (domyślna), aby rozwijać wszelkie zmienne ścieżki w kontekście 64-bitowym na klientach 64-bitowych. Klienci 32-bitowi będą zawsze korzystać z kontekstu 32-bitowego.",
+ "detectionMethod": "Metoda wykrywania",
+ "detectionMethodTooltip": "Wybierz typ metody wykrywania używanej do weryfikacji obecności aplikacji.",
+ "fileOrFolder": "Plik lub folder",
+ "fileOrFolderToolTip": "Plik lub folder do wykrycia.",
+ "operator": "Operator",
+ "operatorTooltip": "Wybierz operator dla metody wykrywania używanej w celu weryfikacji porównania.",
+ "path": "Ścieżka",
+ "pathTooltip": "Pełna ścieżka folderu zawierającego plik lub folder do wykrycia.",
+ "value": "Wartość",
+ "valueTooltip": "Wybierz wartość, która jest zgodna z wybraną metodą wykrywania. W przypadku metod wykrywania opartych na dacie należy wprowadzić datę w czasie lokalnym."
+ },
+ "GridColumns": {
+ "pathOrCode": "Ścieżka/kod",
+ "type": "Typ"
+ },
+ "MsiRule": {
+ "operator": "Operator",
+ "operatorTooltip": "Wybierz operator porównania weryfikacji wersji produktu MSI.",
+ "productCode": "Kod produktu MSI",
+ "productCodeTooltip": "Prawidłowy kod produktu MSI dla aplikacji.",
+ "productVersion": "Wartość",
+ "productVersionCheck": "Sprawdzenie wersji produktu MSI",
+ "productVersionCheckTooltip": "Wybierz opcję „Tak”, aby weryfikować nie tylko kod produktu MSI, ale także wersję produktu.",
+ "productVersionTooltip": "Wprowadź wersję produktu MSI dla aplikacji."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Porównanie liczb całkowitych",
+ "keyDoesNotExist": "Klucz nie istnieje",
+ "keyExists": "Klucz istnieje",
+ "stringComparison": "Porównanie ciągów",
+ "valueDoesNotExist": "Wartość nie istnieje",
+ "valueExists": "Wartość istnieje",
+ "versionComparison": "Porównanie wersji"
+ },
+ "associatedWith32Bit": "Skojarzone z aplikacją 32-bitową na klientach 64-bitowych",
+ "associatedWith32BitTooltip": "Wybierz opcję „Tak”, aby przeszukiwać rejestr 32-bitowy na klientach 64-bitowych. Wybierz opcję „Nie” (domyślna), aby przeszukiwać rejestr 64-bitowy na klientach 64-bitowych. Klienci 32-bitowi zawsze będą przeszukiwać rejestr 32-bitowy.",
+ "detectionMethod": "Metoda wykrywania",
+ "detectionMethodTooltip": "Wybierz typ metody wykrywania używanej do weryfikacji obecności aplikacji.",
+ "keyPath": "Ścieżka klucza",
+ "keyPathTooltip": "Pełna ścieżka wpisu rejestru zawierającego wartość do wykrycia.",
+ "operator": "Operator",
+ "operatorTooltip": "Wybierz operator dla metody wykrywania używanej w celu weryfikacji porównania.",
+ "value": "Wartość",
+ "valueName": "Nazwa wartości",
+ "valueNameTooltip": "Nazwa wartości rejestru do wykrycia.",
+ "valueTooltip": "Wybierz wartość, która jest zgodna z wybraną metodą wykrywania."
+ },
+ "RuleTypeOptions": {
+ "file": "Plik",
+ "mSI": "MSI",
+ "registry": "Rejestr"
+ },
+ "gridAriaLabel": "Reguły wykrywania",
+ "header": "Utwórz regułę wskazującą obecność aplikacji.",
+ "noRulesSelectedPlaceholder": "Nie określono żadnych reguł.",
+ "ruleTableLimit": "Możesz dodać maksymalnie 25 reguł wykrywania",
+ "ruleType": "Typ reguły",
+ "ruleTypeTooltip": "Wybierz typ reguły wykrywania do dodania."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Użyj niestandardowego skryptu wykrywania",
+ "manual": "Ręcznie skonfiguruj reguły wykrywania"
+ },
+ "bladeTitle": "Reguły wykrywania",
+ "header": "Skonfiguruj reguły specyficzne dla aplikacji używane do wykrywania obecności aplikacji.",
+ "rulesFormat": "Format reguł",
+ "rulesFormatTooltip": "Wybierz opcję ręcznego skonfigurowania reguł wykrywania lub zastosuj skrypt niestandardowy, aby wykryć obecność aplikacji.",
+ "selectorLabel": "Reguły wykrywania"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Zaakceptuj Postanowienia licencyjne dotyczące oprogramowania firmy Microsoft w imieniu użytkowników",
"appSuiteConfigurationLabel": "Konfiguracja zestawu aplikacji",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "Wybrane języki: {0}",
"xmlConfigurationLabel": "Konfiguracja XML"
},
- "Filters": {
- "ruleSyntax": "Składnia reguł",
- "filters": "Filtry"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Zezwalaj użytkownikowi na zmianę ustawienia",
- "tooltip": "Określ, czy użytkownik może zmieniać ustawienie."
- },
- "AllowWorkAccounts": {
- "title": "Zezwalaj tylko na konta służbowe",
- "tooltip": "Po włączeniu tego ustawienia użytkownicy nie będą mogli dodawać osobistych kont e-mail i magazynu w programie Outlook. Jeśli użytkownik ma już dodane konto osobiste do programu Outlook, zostanie poproszony o jego usunięcie. Jeśli użytkownik nie usunie konta osobistego, nie będzie można dodać konta służbowego."
- },
- "BlockExternalImages": {
- "title": "Blokuj obrazy zewnętrzne",
- "tooltip": "Gdy blokowanie obrazów zewnętrznych jest włączone, aplikacja nie będzie pozwalać na pobieranie obrazów hostowanych w Internecie, które są osadzone w treści wiadomości. Jeśli ta funkcja jest ustawiona jako nieskonfigurowana, jej domyślnym ustawieniem w aplikacji jest Wyłączone"
- },
- "ConfigureEmail": {
- "title": "Konfiguruj ustawienia konta e-mail"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Domyślny podpis aplikacji wskazuje, czy aplikacja będzie używać podpisu „Pobierz program Outlook dla systemu Android” jako domyślnego podpisu podczas tworzenia wiadomości. Jeśli to ustawienie zostanie wyłączone, domyślny podpis nie będzie używany, ale użytkownicy będą mogli dodać własny podpis.\r\n\r\nJeśli zostanie ustawiona wartość Nie skonfigurowano, domyślnie ustawienie aplikacji będzie włączone.",
- "iOS": "Domyślny podpis aplikacji wskazuje, czy aplikacja będzie używać podpisu „Pobierz program Outlook dla systemu iOS” jako domyślnego podpisu podczas tworzenia wiadomości. Jeśli to ustawienie zostanie wyłączone, domyślny podpis nie będzie używany, ale użytkownicy będą mogli dodać własny podpis.\r\n\r\nJeśli zostanie ustawiona wartość Nie skonfigurowano, domyślnie ustawienie aplikacji będzie włączone."
- },
- "title": "Domyślny podpis aplikacji"
- },
- "OfficeFeedReplies": {
- "title": "Kanał informacyjny odkrywania",
- "tooltip": "Kanał informacyjny odkrywania przedstawia najczęściej używane pliki pakietu Office. Domyślnie ten kanał jest włączony, gdy dla użytkownika włączono usługę Delve. W przypadku ustawienia wartości Nie skonfigurowano domyślne ustawienie aplikacji to Włączone."
- },
- "OrganizeMailByThread": {
- "title": "Organizuj pocztę według wątku",
- "tooltip": "Zachowanie domyślne w programie Outlook polega na przekształcaniu konwersacji pocztowych w widok wątku. Jeśli to ustawienie zostanie wyłączone, program Outlook będzie wyświetlał każdą wiadomość pojedynczo i nie będzie grupować ich według wątku."
- },
- "PlayMyEmails": {
- "title": "Odtwarzaj moje wiadomości e-mail",
- "tooltip": "Funkcja Odtwarzaj moje wiadomości e-mail nie jest domyślnie włączona w aplikacji, ale jest polecana uprawnionym użytkownikom za pośrednictwem baneru w skrzynce odbiorczej. Ustawienie na wartość Wyłączone spowoduje, że ta funkcja nie będzie polecana uprawnionym użytkownikom w aplikacji. Użytkownicy mogą ręcznie włączać funkcję Odtwarzaj moje wiadomości e-mail w aplikacji, nawet jeśli ta funkcja jest ustawiona na wartość Wyłączona. Po ustawieniu wartości Nie skonfigurowano domyślnym ustawieniem aplikacji jest Włączone i funkcja będzie polecana uprawnionym użytkownikom."
- },
- "SuggestedReplies": {
- "title": "Sugerowane odpowiedzi",
- "tooltip": "Po otwarciu wiadomości program Outlook może wyświetlić pod nią sugerowane odpowiedzi. Jeśli wybierzesz sugerowaną odpowiedź, możesz ją edytować przed wysłaniem."
- },
- "SyncCalendars": {
- "title": "Synchronizuj kalendarze",
- "tooltip": "Skonfiguruj, czy użytkownicy mogą synchronizować swoje kalendarze programu Outlook z natywną aplikacją kalendarza i bazą danych. "
- },
- "TextPredictions": {
- "title": "Podpowiadanie tekstu",
- "tooltip": "Program Outlook może sugerować wyrazy i frazy podczas redagowania wiadomości. Gdy aplikacja Outlook wyświetli sugestię, przesuń, aby ją zaakceptować. Gdy ustawienie nie jest skonfigurowane, domyślnym ustawieniem aplikacji jest Włączone."
- },
- "ThemesEnabled": {
- "title": "Kompozycje włączone",
- "tooltip": "Określ, czy użytkownik może używać niestandardowego motywu wizualnego."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "Urządzenia z systemem ChromeOS"
- },
- "ManagedDesktop": {
- "adminContacts": "Kontakty administracyjne",
- "appPackaging": "Pakiety aplikacji",
- "autopatchGroups": "Grupy poprawek automatycznych",
- "devices": "Urządzenia",
- "featureEnablement": "Aktywowanie funkcji",
- "feedback": "Opinie",
- "gettingStarted": "Wprowadzenie",
- "messages": "Komunikaty",
- "onlineResources": "Zasoby online",
- "policyHealth": "Kondycja zasad",
- "policyHealthPreview": "Kondycja zasad (wersja zapoznawcza)",
- "releaseManagement": "Zarządzanie wydaniami",
- "serviceRequests": "Żądania usług",
- "settings": "Ustawienia",
- "supportRequests": "Żądania pomocy technicznej",
- "tenantEnrollment": "Rejestracja dzierżawy",
- "tenantManagement": "Zarządzanie dzierżawą"
- },
- "actions": "Akcje w przypadku niezgodności",
- "advancedExchangeSettings": "Ustawienia usługi Exchange Online",
- "advancedThreatProtection": "Microsoft Defender dla punktu końcowego",
- "allApps": "Wszystkie aplikacje",
- "allDevices": "Wszystkie urządzenia",
- "androidFotaDeployments": "Wdrożenia Android FOTA",
- "appBundles": "Zbiór aplikacji",
- "appCategories": "Kategorie aplikacji",
- "appConfigPolicies": "Zasady konfiguracji aplikacji",
- "appConfigurationStatus": "Stan konfiguracji aplikacji",
- "appInstallStatus": "Stan instalacji aplikacji",
- "appLicences": "Licencje aplikacji",
- "appProtectionPolicies": "Zasady ochrony aplikacji",
- "appProtectionStatus": "Stan ochrony aplikacji",
- "appSelectiveWipe": "Selektywne czyszczenie aplikacji",
- "appleVppTokens": "Tokeny VPP firmy Apple",
- "apps": "Aplikacje",
- "assign": "Przypisania",
- "assignedPermissions": "Przypisane uprawnienia",
- "assignedRoles": "Przypisane role",
- "autopilotDeploymentReport": "Wdrożenia rozwiązania Autopilot (wersja zapoznawcza)",
- "autopilotDeploymentReportV2": "Wdrożenia rozwiązania Autopilot 2.0 (wersja zapoznawcza)",
- "brandingAndCustomization": "Dostosowywanie",
- "cartProfiles": "Profile koszyków",
- "certificateConnectors": "Łączniki certyfikatu",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Urządzenia podłączone do chmury (wersja zapoznawcza)",
- "cloudPcActions": "Akcje dotyczące komputerów w chmurze (wersja zapoznawcza)",
- "cloudPcMaintenanceWindows": "Okna obsługi komputera w chmurze (wersja zapoznawcza)",
- "compliancePolicies": "Zasady zgodności",
- "complianceScriptManagement": "Skrypty",
- "complianceScriptManagementPreview": "Skrypty (wersja zapoznawcza)",
- "complianceSettings": "Ustawienia zasad zgodności",
- "conditionStatements": "Instrukcje warunkowe",
- "conditions": "Lokalizacje",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Profile konfiguracji",
- "configurationScripts": "Skrypty konfiguracji",
- "connectorsAndTokens": "Łączniki i tokeny",
- "corporateDeviceIdentifiers": "Identyfikatory urządzeń firmowych",
- "customAttributes": "Atrybuty niestandardowe",
- "customNotifications": "Powiadomienia niestandardowe",
- "deploymentSettings": "Ustawienia wdrożenia",
- "derivedCredentials": "Pochodne poświadczenia",
- "deviceActions": "Akcje urządzenia",
- "deviceCategories": "Kategorie urządzeń",
- "deviceCleanUp": "Reguły czyszczenia urządzeń",
- "deviceEnrollmentManagers": "Menedżerowie rejestracji urządzeń",
- "deviceExecutionStatus": "Stan urządzenia",
- "deviceLimitEnrollmentRestrictions": "Ograniczenia limitu urządzeń rejestracji",
- "deviceTypeEnrollmentRestrictions": "Ograniczenia platformy urządzenia rejestracji",
- "devices": "Urządzenia",
- "discoveredApps": "Odnalezione aplikacje",
- "edgePolicies": "Zasady dla przeglądarki Microsoft Edge",
- "embeddedSIM": "Profile komórkowe eSIM (wersja zapoznawcza)",
- "enrollDevices": "Zarejestruj urządzenia",
- "enrollmentFailures": "Błędy rejestracji",
- "enrollmentNotifications": "Powiadomienia dotyczące rejestracji (wersja zapoznawcza)",
- "enrollmentRestrictions": "Ograniczenia rejestracji",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Łączniki usług Exchange",
- "failuresForCumulativeQualityUpdates": "Błędy skumulowanej aktualizacji dotyczącej jakości systemu Windows",
- "failuresForDriverUpdates": "Błędy aktualizacji sterownika systemu Windows",
- "failuresForFeatureUpdates": "Błędy aktualizacji funkcji",
- "failuresForQualityUpdates": "Błędy przyspieszonej aktualizacji systemu Windows",
- "featureFlighting": "Pilotaż funkcji",
- "featureUpdateDeployments": "Aktualizacje funkcji dla systemu Windows 10 i nowszego",
- "flighting": "Testowanie",
- "fotaUpdate": "Bezprzewodowa aktualizacja oprogramowania układowego",
- "groupPolicy": "Szablony administracyjne",
- "groupPolicyAnalytics": "Analiza zasad grupy",
- "helpSupport": "Pomoc i obsługa techniczna",
- "helpSupportReplacement": "Pomoc i obsługa techniczna ({0})",
- "iOSAppProvisioning": "Profile aprowizacji aplikacji systemu iOS",
- "incompleteUserEnrollments": "Nieukończone rejestracje użytkowników",
- "iosUpdates": "Zasady aktualizacji dla systemu iOS/iPadOS",
- "legacyPcManagement": "Zarządzanie starszymi komputerami",
- "macOSSoftwareUpdate": "Aktualizuj zasady dla systemu macOS",
- "macOSSoftwareUpdateAccountSummaries": "Stan instalacji dla urządzeń z systemem macOS",
- "macOSSoftwareUpdateCategorySummaries": "Podsumowanie aktualizacji oprogramowania",
- "macOSSoftwareUpdateStateSummaries": "aktualizacje",
- "managedGooglePlay": "Zarządzany sklep Google Play",
- "msfb": "Microsoft Store dla Firm",
- "myPermissions": "Moje uprawnienia",
- "notifications": "Powiadomienia",
- "officeApps": "Aplikacje pakietu Office",
- "officeProPlusPolicies": "Zasady dla aplikacji pakietu Office",
- "onPremise": "Lokalnie",
- "onPremisesConnector": "Lokalny łącznik Exchange ActiveSync",
- "onPremisesDeviceAccess": "Urządzenia Exchange ActiveSync",
- "onPremisesManageAccess": "Dostęp do lokalnego wystąpienia programu Exchange",
- "outOfDateIosDevices": "Błędy instalacji dla urządzeń z systemem iOS",
- "overview": "Przegląd",
- "partnerDeviceManagement": "Zarządzanie urządzeniem partnera",
- "perUpdateRingDeploymentState": "Stan wdrożenia według pierścienia aktualizacji",
- "permissions": "Uprawnienia",
- "platformApps": "Aplikacje: {0}",
- "platformDevices": "Urządzenia: {0}",
- "platformEnrollment": "{0} — rejestracja",
- "policies": "Zasady",
- "profiles": "Profile",
- "properties": "Właściwości",
- "reports": "Raporty",
- "retireNoncompliantDevices": "Wycofaj niezgodne urządzenia",
- "retireNoncompliantDevicesPreview": "Wycofaj niezgodne urządzenia (wersja zapoznawcza)",
- "role": "Rola",
- "scriptManagement": "Skrypty",
- "securityBaselines": "Punkty odniesienia zabezpieczeń",
- "serviceToServiceConnector": "Łącznik usługi Exchange Online",
- "servicenowConnector": "Łącznik usługi ServiceNow",
- "shellScripts": "Skrypty powłoki",
- "teamViewerConnector": "Łącznik programu TeamViewer",
- "telecomeExpenseManagement": "Zarządzanie wydatkami na telekomunikację",
- "tenantAdmin": "Administrator dzierżawy",
- "tenantAdministration": "Administracja dzierżawą",
- "termsAndConditions": "Warunki i postanowienia",
- "titles": "Tytuły",
- "troubleshoot": "Rozwiązywanie problemów",
- "troubleshootSupport": "Rozwiązywanie problemów i pomoc techniczna",
- "user": "Użytkownik",
- "userExecutionStatus": "Stan użytkownika",
- "wdacSupplementalPolicies": "Uzupełniające zasady trybu S",
- "win32CatalogUpdateApp": "Aktualizacje dla aplikacji do zarządzania aplikacjami dla przedsiębiorstw",
- "win32CatalogUpdateAppInPreview": "Aktualizacje dla aplikacji wykazu systemu Windows (Win32) (wersja zapoznawcza)",
- "windows10DriverUpdate": "Aktualizacje sterowników dla systemu Windows 10 i nowszych",
- "windows10QualityUpdate": "Aktualizacje dotyczące jakości dla systemu Windows 10 i nowszych",
- "windows10UpdateRings": "Pierścienie aktualizacji dla systemu Windows 10 i nowszego",
- "windows10XPolicyFailures": "Błędy zasad systemu Windows 10X",
- "windows365PartnerConnector": "Łączniki partnerów systemu Windows 365",
- "windowsDiagnosticData": "Dane systemu Windows",
- "windowsEnterpriseCertificate": "Certyfikat przedsiębiorstwa systemu Windows",
- "windowsManagement": "Skrypty",
- "windowsSideLoadingKeys": "Klucze ładowania bezpośredniego systemu Windows",
- "windowsSymantecCertificate": "Certyfikat firmy DigiCert dla systemu Windows",
- "windowsThreatReport": "Stan agenta zagrożenia"
- },
- "ScopeTypes": {
- "allDevices": "Wszystkie urządzenia",
- "allUsers": "Wszyscy użytkownicy",
- "allUsersAndDevices": "Wszyscy użytkownicy i wszystkie urządzenia",
- "selectedGroups": "Wybrane grupy"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Domyślne używanie funkcji Microsoft Search",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype dla firm",
- "oneDrive": "Aplikacja klasyczna OneDrive",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone i iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Nieobsługiwane",
+ "supportEnding": "Zakończenie świadczenia pomocy technicznej",
+ "supported": "Obsługiwane"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Domyślny",
- "header": "Aktualizuj priorytet",
- "postponed": "Odłożone",
- "priority": "Wysoki priorytet"
- },
- "AutoUpdateSupersededApps": {
- "label": "Automatyczna aktualizacja",
- "sublabel": "Jeśli zastąpione aplikacje zostały zainstalowane przez użytkownika z portalu firmy, należy zainstalować aplikację zastępującą."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Tło",
- "displayText": "Pobieranie zawartości za {0}",
- "foreground": "Pierwszy plan",
- "header": "Priorytet optymalizacji dostarczania"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Zezwalaj użytkownikowi na odłożenie powiadomienia o ponownym uruchomieniu",
- "countdownDialog": "Wybierz, kiedy wyświetlić okno dialogowe odliczania do ponownego uruchomienia przed ponownym uruchomieniem (minuty)",
- "durationInMinutes": "Okres prolongaty ponownego uruchomienia urządzenia (minuty)",
- "snoozeDurationInMinutes": "Wybierz czas trwania odłożenia (minuty)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Strefa czasowa",
- "local": "Strefa czasowa urządzenia",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Data i godzina",
- "deadlineTimeColumnLabel": "Ostateczny termin instalacji",
- "deadlineTimeDatePickerErrorMessage": "Wybrana data musi być późniejsza niż data dostępności",
- "deadlineTimeLabel": "Ostateczny termin instalacji aplikacji",
- "defaultTime": "Najszybciej, jak to możliwe",
- "infoText": "Ta aplikacja będzie dostępna zaraz po wdrożeniu, chyba że poniżej określisz czas dostępności. Jeśli jest to wymagana aplikacja, możesz określić termin instalacji.",
- "specificTime": "Określona data i godzina",
- "startTimeColumnLabel": "Dostępność",
- "startTimeDatePickerErrorMessage": "Wybrana data musi być wcześniejsza niż termin ostateczny",
- "startTimeLabel": "Dostępność aplikacji"
- },
- "restartGracePeriodHeader": "Okres prolongaty ponownego uruchomienia",
- "restartGracePeriodLabel": "Okres prolongaty ponownego uruchomienia urządzenia",
- "summaryTitle": "Środowisko użytkownika końcowego"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "Plik lub folder jako wybrane wymaganie.",
- "pathToolTip": "Pełna ścieżka pliku lub folderu do wykrycia.",
- "property": "Właściwość",
- "valueToolTip": "Wybierz wartość wymagania, która jest zgodna z wybraną metodą wykrywania. W przypadku metod wykrywania opartych na dacie i godzinie należy wprowadzić datę i godzinę w formacie lokalnym."
- },
- "GridColumns": {
- "pathOrScript": "Ścieżka/skrypt",
- "type": "Typ"
- },
- "Registry": {
- "keyPath": "Ścieżka klucza",
- "keyPathTooltip": "Pełna ścieżka wpisu rejestru zawierającego wartość jako wymaganie.",
- "operator": "Operator",
- "operatorTooltip": "Wybierz operator porównania.",
- "registryRequirement": "Wymaganie klucza rejestru",
- "registryRequirementTooltip": "Wybierz porównanie wymagania klucza rejestru.",
- "valueName": "Nazwa wartości",
- "valueNameTooltip": "Nazwa wymaganej wartości rejestru."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Automatyczne zatwierdzanie wszystkich zalecanych aktualizacji sterowników",
+ "manual": "Ręczne zatwierdzanie i wdrażanie aktualizacji sterowników"
+ },
+ "BulkActions": {
+ "button": "Akcje zbiorcze"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Metoda zatwierdzania:"
},
- "RequirementTypeOptions": {
- "fileType": "Plik",
- "registry": "Rejestr",
- "script": "Skrypt"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Wartość logiczna",
- "dateTime": "Data i godzina",
- "float": "Zmiennoprzecinkowe",
- "integer": "Liczba całkowita",
- "string": "Ciąg",
- "version": "Wersja"
- },
- "duplicateName": "Nazwa skryptu {0} jest już w użyciu. Wprowadź inną nazwę.",
- "enforceSignatureCheck": "Wymuszaj sprawdzanie podpisu skryptu",
- "enforceSignatureCheckTooltip": "Wybierz opcję „Tak”, aby sprawdzić, czy skrypt jest podpisany przez zaufanego wydawcę, co pozwoli na uruchomienie skryptu bez wyświetlania ostrzeżeń ani monitów. Działanie skryptu nie będzie blokowane. Wybierz opcję „Nie” (domyślna), aby uruchomienie skryptu wymagało potwierdzenia użytkownika końcowego, ale bez weryfikacji podpisu.",
- "loggedOnCredentials": "Uruchom ten skrypt, używając poświadczeń zalogowanego użytkownika",
- "loggedOnCredentialsTooltip": "Uruchom skrypt przy użyciu poświadczeń urządzenia, których użyto do logowania.",
- "operatorTooltip": "Wybierz operator porównania wymagania.",
- "requirementMethod": "Wybierz wyjściowy typ danych",
- "requirementMethodTooltip": "Wybierz typ danych używany podczas określania wymagań dopasowania wykrywania.",
- "scriptContent": "Zawartość skryptu",
- "scriptFile": "Plik skryptu",
- "scriptFileTooltip": "Wybierz skrypt programu PowerShell, który będzie wykrywać obecność aplikacji na kliencie. Jeśli aplikacja zostanie wykryta, proces wymagania zwróci kod zakończenia o wartości 0 i zapisze wartość ciągu w wyjściu STDOUT.",
- "scriptName": "Nazwa skryptu",
- "value": "Wartość",
- "valueTooltip": "Wybierz wartość wymagania, która jest zgodna z wybraną metodą wykrywania. W przypadku metod wykrywania opartych na dacie i godzinie należy wprowadzić datę i godzinę w formacie lokalnym."
+ "DeploymentDeferralInDays": {
+ "label": "Wykonywanie aktualizacji udostępnianych później",
+ "units": "(dni)",
+ "value": "{0} dni"
+ },
+ "DriverAction": {
+ "header": "Wybierz akcję poniżej.",
+ "label": "Akcja sterownika",
+ "placeholder": "Wybierz akcję"
},
- "bladeTitle": "Dodawanie reguły wymagania",
- "createRequirementHeader": "Utwórz wymaganie.",
- "header": "Skonfiguruj dodatkowe reguły wymagań",
- "label": "Dodatkowe reguły wymagań",
- "noRequirementsSelectedPlaceholder": "Nie określono żadnych wymagań.",
- "requirementType": "Typ wymagania",
- "requirementTypeTooltip": "Wybierz typ metody wykrywania służącej do określania sposobu walidacji wymagania."
- },
- "architectures": "Architektura systemu operacyjnego",
- "architecturesTooltip": "Wybierz architektury potrzebne do zainstalowania aplikacji.",
- "bladeTitle": "Wymagania",
- "diskSpace": "Wymagane miejsce na dysku (MB)",
- "diskSpaceTooltip": "Wymagana ilość wolnego miejsca na dysku systemowym, aby zainstalować aplikację.",
- "header": "Określ wymagania, które urządzenia muszą spełniać przed zainstalowaniem aplikacji:",
- "maximumTextFieldValue": "Wartość maksymalna to {0}.",
- "minimumCpuSpeed": "Minimalna wymagana szybkość procesora CPU (MHz)",
- "minimumCpuSpeedTooltip": "Minimalna szybkość procesora CPU wymagana do zainstalowania aplikacji.",
- "minimumLogicalProcessors": "Minimalna wymagana liczba procesorów logicznych",
- "minimumLogicalProcessorsTooltip": "Minimalna liczba procesorów logicznych wymagana do zainstalowania aplikacji.",
- "minimumOperatingSystem": "Minimalna wersja systemu operacyjnego",
- "minimumOperatingSystemTooltip": "Wybierz minimalną wersję systemu operacyjnego wymaganą do zainstalowania aplikacji.",
- "minumumTextFieldValue": "Wartość musi być równa co najmniej {0}.",
- "physicalMemory": "Wymagana pamięć fizyczna (MB)",
- "physicalMemoryTooltip": "Pamięć fizyczna (RAM) wymagana do zainstalowania aplikacji.",
- "selectorLabel": "Wymagania",
- "validNumber": "Wprowadź poprawną liczbę."
- },
- "PolicySet": {
- "appManagement": "Zarządzanie aplikacjami",
- "assignments": "Przypisania",
- "basics": "Podstawowe",
- "deviceEnrollment": "Rejestrowanie urządzenia",
- "deviceManagement": "Zarządzanie urządzeniami",
- "scopeTags": "Tagi zakresu",
- "appConfigurationTitle": "Zasady konfiguracji aplikacji",
- "appProtectionTitle": "Zasady ochrony aplikacji",
- "appTitle": "Aplikacje",
- "iOSAppProvisioningTitle": "Profile aprowizacji aplikacji systemu iOS",
- "deviceLimitRestrictionTitle": "Ograniczenia limitu urządzeń",
- "deviceTypeRestrictionTitle": "Ograniczenia typu urządzeń",
- "enrollmentStatusSettingTitle": "Strony stanu rejestracji",
- "windowsAutopilotDeploymentProfileTitle": "Profile wdrażania rozwiązania Windows Autopilot",
- "deviceComplianceTitle": "Zasady zgodności urządzeń",
- "deviceConfigurationTitle": "Profile konfiguracji urządzeń",
- "powershellScriptTitle": "Skrypty PowerShell"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Dołączone sterowniki"
+ },
+ "SelectDrivers": {
+ "header": "Wybierz sterowniki do uwzględnienia w akcji zbiorczej"
+ },
+ "SelectDriversToInclude": {
+ "button": "Wybierz sterowniki do uwzględnienia"
+ },
+ "SelectLessDrivers": {
+ "validation": "Można wybrać maksymalnie sto sterowników"
+ },
+ "SelectMoreDrivers": {
+ "validation": "Należy wybrać co najmniej jeden sterownik"
+ },
+ "SelectedDrivers": {
+ "label": "Wybrane sterowniki:"
+ },
+ "availabilityDate": "Udostępnij w usłudze Windows Update",
+ "bladeTitle": "Aktualizacje sterowników dla systemu Windows 10 i nowszych (wersja zapoznawcza)",
+ "lastSync": "Ostatnia synchronizacja:",
+ "lastSyncDefaultText": "Oczekiwanie na początkowe zbieranie spisów",
+ "loadError": "Ładowanie nie powiodło się!"
+ },
+ "DriverStatus": {
+ "approved": "Zatwierdzone",
+ "declined": "Odrzucone",
+ "export": "Eksportowanie zalecanych sterowników",
+ "needsReview": "Wymaga przeglądu",
+ "paused": "Wstrzymane"
+ },
+ "DriversToReview": {
+ "text": "{0} do przeglądu"
+ },
+ "Subtitle": {
+ "automatic": "Zasady automatycznego zatwierdzania aktualizacji sterowników",
+ "manual": "Zasady ręcznego zatwierdzania aktualizacji sterowników"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Proponowane",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrajn",
- "countryNameZA": "Republika Południowej Afryki",
- "countryNameJO": "Jordania",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Czechy",
- "countryNameLT": "Litwa",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ekwador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "SRA Hongkong",
- "countryNameGH": "Ghana",
- "countryNameSA": "Arabia Saudyjska",
- "countryNamePG": "Papua-Nowa Gwinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "Indie",
- "countryNameHN": "Honduras",
- "countryNameRO": "Rumunia",
- "countryNameKZ": "Kazachstan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Gruzja",
- "countryNameTT": "Trynidad i Tobago",
- "countryNameMP": "Mariany Północne",
- "countryNameMV": "Malediwy",
- "countryNameFI": "Finlandia",
- "countryNameNO": "Norwegia",
- "countryNameEE": "Estonia",
- "countryNameVE": "Wenezuela",
- "countryNameUZ": "Uzbekistan",
- "countryNameME": "Czarnogóra",
- "countryNameTJ": "Tadżykistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "Francja",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Włochy",
- "countryNameAZ": "Azerbejdżan",
- "countryNameKG": "Kirgistan",
- "countryNameWF": "Wallis i Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falklandy (Malwiny)",
- "countryNameGY": "Gujana",
- "countryNameSS": "Sudan Południowy",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Syria",
- "countryNameMD": "Mołdawia",
- "countryNameVC": "Saint Vincent i Grenadyny",
- "countryNameID": "Indonezja",
- "countryNameRE": "Reunion",
- "countryNameER": "Erytrea",
- "countryNameMK": "Macedonia Północna",
- "countryNameTG": "Togo",
- "countryNamePF": "Polinezja Francuska",
- "countryNameKY": "Kajmany",
- "countryNameIO": "Brytyjskie Terytorium Oceanu Indyjskiego",
- "countryNameRU": "Rosja",
- "countryNameMA": "Maroko",
- "countryNameAU": "Australia",
- "countryNameBO": "Boliwia",
- "countryNameVA": "Watykan",
- "countryNameVG": "Brytyjskie Wyspy Dziewicze",
- "countryNameFM": "Mikronezja",
- "countryNameAQ": "Antarktyka",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brazylia",
- "countryNameIS": "Islandia",
- "countryNamePE": "Peru",
- "countryNameBG": "Bułgaria",
- "countryNamePR": "Portoryko",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamy",
- "countryNameJE": "Jersey",
- "countryNameMO": "SRA Makau",
- "countryNameRW": "Rwanda",
- "countryNameAS": "Samoa Amerykańskie",
- "countryNameBQ": "Bonaire, Sint Eustatius i Saba",
- "countryNameMF": "Saint-Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "Nowa Kaledonia",
- "countryNameAC": "Wyspa Wniebowstąpienia",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladesz",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Kanada",
- "countryNameSH": "Święta Helena",
- "countryNameYT": "Majotta",
- "countryNameMN": "Mongolia",
- "countryNamePA": "Panama",
- "countryNameCM": "Kamerun",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japonia",
- "countryNameCY": "Cypr",
- "countryNameCD": "Demokratyczna Republika Konga",
- "countryNameTN": "Tunezja",
- "countryNameTR": "Turcja",
- "countryNameWS": "Samoa",
- "countryNameSE": "Szwecja",
- "countryNameXK": "Kosowo",
- "countryNameKH": "Kambodża",
- "countryNamePL": "Polska",
- "countryNameDZ": "Algieria",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominika",
- "countryNameEG": "Egipt",
- "countryNameGF": "Gujana Francuska",
- "countryNameNZ": "Nowa Zelandia",
- "countryNamePS": "Autonomia Palestyńska",
- "countryNameIL": "Izrael",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Grecja",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauretania",
- "countryNameVI": "Wyspy Dziewicze Stanów Zjednoczonych",
- "countryNameGQ": "Gwinea Równikowa",
- "countryNameMX": "Meksyk",
- "countryNameDJ": "Dżibuti",
- "countryNameGN": "Gwinea",
- "countryNameCN": "Chiny",
- "countryNameMZ": "Mozambik",
- "countryNameBV": "Wyspa Bouveta",
- "countryNameNF": "Wyspa Norfolk",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "Georgia Południowa i Sandwich Południowy",
- "countryNameRS": "Serbia",
- "countryNameCC": "Wyspy Kokosowe",
- "countryNameNA": "Namibia",
- "countryNameDE": "Niemcy",
- "countryNameCG": "Republika Konga",
- "countryNameKW": "Kuwejt",
- "countryNameMH": "Wyspy Marshalla",
- "countryNameVN": "Wietnam",
- "countryNameBY": "Białoruś",
- "countryNameMY": "Malezja",
- "countryNameST": "Wyspy Świętego Tomasza i Książęca",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Czad",
- "countryNameCX": "Wyspa Bożego Narodzenia",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Gwinea Bissau",
- "countryNameUA": "Ukraina",
- "countryNameCU": "Kuba",
- "countryNameCO": "Kolumbia",
- "countryNameNI": "Nikaragua",
- "countryNameHR": "Chorwacja",
- "countryNameSC": "Seszele",
- "countryNameNL": "Holandia",
- "countryNameUM": "Odległe Mniejsze Wyspy Stanów Zjednoczonych",
- "countryNameIM": "Wyspa Man",
- "countryNameFJ": "Fidżi",
- "countryNameSR": "Surinam",
- "countryNameGT": "Gwatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "Zjednoczone Królestwo",
- "countryNameBB": "Barbados",
- "countryNameSI": "Słowenia",
- "countryNameAM": "Armenia",
- "countryNameAR": "Argentyna",
- "countryNamePM": "Saint-Pierre i Miquelon",
- "countryNameTF": "Francuskie Terytoria Południowe i Antarktyczne",
- "countryNameDO": "Dominikana",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martynika",
- "countryNamePT": "Portugalia",
- "countryNameCF": "Republika Środkowoafrykańska",
- "countryNameBE": "Belgia",
- "countryNameKM": "Komory",
- "countryNameLY": "Libia",
- "countryNameIE": "Irlandia",
- "countryNameKP": "Koreańska Republika Ludowo-Demokratyczna",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Słowacja",
- "countryNameTC": "Turks i Caicos",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Jemen",
- "countryNameBA": "Bośnia i Hercegowina",
- "countryNameGP": "Gwadelupa",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Irak",
- "countryNameSJ": "Svalbard i Jan Mayen",
- "countryNameAX": "Wyspy Alandzkie",
- "countryNameKE": "Kenia",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermudy",
- "countryNameFO": "Wyspy Owcze",
- "countryNameBL": "Saint Barthélemy",
- "countryNameLB": "Liban",
- "countryNameJM": "Jamajka",
- "countryNameAF": "Afganistan",
- "countryNameES": "Hiszpania",
- "countryNameMC": "Monako",
- "countryNameSG": "Singapur",
- "countryNameAL": "Albania",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Wybrzeże Kości Słoniowej (Côte d’Ivoire)",
- "countryNameTW": "Tajwan",
- "countryNameUY": "Urugwaj",
- "countryNameCK": "Wyspy Cooka",
- "countryNameTH": "Tajlandia",
- "countryNameHM": "Wyspy Heard i McDonalda",
- "countryNameGD": "Grenada",
- "countryNameUS": "Stany Zjednoczone",
- "countryNameAT": "Austria",
- "countryNameKR": "Korea Południowa",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Dania",
- "countryNameSV": "Salwador",
- "countryNamePW": "Palau",
- "countryNameET": "Etiopia",
- "countryNameMG": "Madagaskar",
- "countryNameCR": "Kostaryka",
- "countryNameLU": "Luksemburg",
- "countryNameQA": "Katar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Wyspy Salomona",
- "countryNameAE": "Zjednoczone Emiraty Arabskie",
- "countryNameAD": "Andora",
- "countryNameCV": "Wyspy Zielonego Przylądka",
- "countryNameAG": "Antigua i Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Węgry",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Szwajcaria",
- "countryNamePN": "Pitcairn",
- "countryNameGL": "Grenlandia",
- "countryNamePH": "Filipiny",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts i Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Łotwa",
- "countryNamePY": "Paragwaj"
- }
- }
+ "SyncNotification": {
+ "failure": "Nie można zsynchronizować {0}",
+ "failureDescription": "Wystąpił błąd i nie można ukończyć żądanej synchronizacji. Spróbuj ponownie.",
+ "pending": "Synchronizacja {0} w toku",
+ "pendingDescription": "Pobieramy najnowsze dane. Ten proces może potrwać kilka minut.",
+ "success": "Ukończono synchronizację {0} ",
+ "successDescription": "Synchronizacja z usługą WUfB zakończyła się o godzinie {0}"
+ },
+ "SyncSpinner": {
+ "text": "Synchronizacja jest w toku. Może to potrwać kilka minut. Poszukaj alertu lub sprawdź ponownie za kilka minut."
+ },
+ "TabName": {
+ "basics": "Podstawowe informacje",
+ "driverUpdateSettings": "Ustawienia",
+ "otherDrivers": "Inne sterowniki",
+ "properties": "Właściwości",
+ "recommendedDrivers": "Zalecane sterowniki"
+ },
+ "driverAddFilter": "Dodaj filtr",
+ "driverApplicableDevices": "Odpowiednie urządzenia",
+ "driverApprovalStatus": "Stan",
+ "driverBulkActions": "Akcje zbiorcze",
+ "driverClass": "Klasa sterownika",
+ "driverCount": "Pokazywanie od {0} do {1} z {2} rekordów",
+ "driverFilterNoneSelected": "Nic nie wybrano",
+ "driverManufacturer": "Producent",
+ "driverName": "Nazwa sterownika",
+ "driverNameLower": "wdrożenie aktualizacji sterowników systemu windows",
+ "driverNameUpper": "wdrożenie aktualizacji sterowników systemu Windows",
+ "driverRefresh": "Odśwież",
+ "driverReleaseDate": "Data wydania",
+ "driverSearch": "Wyszukiwanie",
+ "driverSearchKeyword": "Wprowadź słowo kluczowe wyszukiwania",
+ "driverVersion": "Wersja",
+ "firstDeploymentDate": "Pierwsze wdrożenie",
+ "infoBoxText": "Wypełnienie spisu może potrwać do 24 godzin po przypisaniu i utworzeniu zasad.",
+ "textBlockText": "Wybierz ustawienia zatwierdzenia i wdrażania zasad. Wybierz, aby skonfigurować zasady do zatwierdzania i wdrażania aktualizacji automatycznie lub ręcznie. Nie można zmienić metody zatwierdzania po utworzeniu zasad, ale wprowadzenie zmiany w szczegółowych informacjach dotyczących indywidualnych zatwierdzeń i wdrożeń sterowników będzie możliwe po utworzeniu spisu dla przypisanych urządzeń."
+ },
+ "TACSettings": {
+ "edgeSettings": "Ustawienia konfiguracji przeglądarki Microsoft Edge",
+ "edgeWindowsDataProtectionSettings": "Przeglądarka Edge (Windows) — ustawienia ochrony danych — wersja zapoznawcza",
+ "edgeWindowsSettings": "Przeglądarka Edge (Windows) — ustawienia konfiguracji — wersja zapoznawcza",
+ "generalAppConfig": "Ogólna konfiguracja aplikacji",
+ "generalSettings": "Ogólne ustawienia konfiguracji",
+ "outlookSMIMEConfig": "Ustawienia S/MIME programu Outlook",
+ "outlookSettings": "Ustawienia konfiguracji programu Outlook",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-pt.json b/Documentation/Strings-pt.json
index c699d0c..694fc4d 100644
--- a/Documentation/Strings-pt.json
+++ b/Documentation/Strings-pt.json
@@ -1,4 +1,1691 @@
{
+ "InstallContextType": {
+ "device": "Device",
+ "deviceContext": "Device context",
+ "user": "User",
+ "userContext": "User context"
+ },
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "One block action is required for all compliance policies.",
+ "graceperiod": "Schedule (days after noncompliance)",
+ "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
+ "subtitle": "Specify action parameters",
+ "title": "Action parameters"
+ },
+ "List": {
+ "gracePeriodDay": "{0} day after noncompliance",
+ "gracePeriodDays": "{0} days after noncompliance",
+ "gracePeriodHour": "{0} hour after noncompliance",
+ "gracePeriodHours": "{0} hours after noncompliance",
+ "gracePeriodMinute": "{0} minute after noncompliance",
+ "gracePeriodMinutes": "{0} minutes after noncompliance",
+ "immediately": "Immediately",
+ "schedule": "Schedule",
+ "scheduleInfoBalloon": "Days after noncompliance",
+ "subtitle": "Specify the sequence of actions on noncompliant devices",
+ "title": "Actions"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Others",
+ "additionalRecipients": "Additional recipients (via email)",
+ "additionalRecipientsBladeTitle": "Select additional recipients",
+ "emailAddressPrompt": "Enter email addresses (separated by commas)",
+ "invalidEmail": "Invalid email address",
+ "messageTemplate": "Message template",
+ "noneSelected": "None selected",
+ "notSelected": "Not selected",
+ "numSelected": "{0} selected",
+ "selected": "Selected"
+ },
+ "block": "Mark device noncompliant",
+ "lockDevice": "Lock device (local action)",
+ "lockDeviceWithPasscode": "Lock device (local action)",
+ "noAction": "No action",
+ "noActionRow": "No actions, select 'Add' to add an action",
+ "pushNotification": "Send push notification to end user",
+ "remoteLock": "Remotely lock the noncompliant device",
+ "removeSourceAccessProfile": "Remove source access profile",
+ "retire": "Add device to retire list",
+ "wipe": "Wipe",
+ "emailNotification": "Send email to end user"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Admin Groups",
+ "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
+ "rolesMenuTitle": "Endpoint Manager roles",
+ "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
+ "RoleAssignmentScope": "Scope Groups"
+ },
+ "AppInformationTab": {
+ "Info": {
+ "AppStoreUrl": {
+ "android": "Enter the link to the app listing in Google Play store. For example:",
+ "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
+ "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
+ "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
+ "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
+ "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
+ "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ },
+ "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
+ "applicableDeviceType": "Select the device types that can install this app.",
+ "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
+ "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
+ "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
+ "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
+ "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
+ "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
+ "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
+ "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
+ "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
+ "learnMore": "Learn more",
+ "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
+ "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
+ "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
+ "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
+ "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
+ "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
+ "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
+ "packageId": "The app Package Identifier is the unique value that identifies the app.",
+ "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
+ "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
+ "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
+ "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
+ "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
+ "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
+ "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
+ "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
+ "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
+ "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
+ },
+ "descriptionPreview": "Preview",
+ "descriptionRequired": "Description is required.",
+ "editDescription": "Edit Description",
+ "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
+ "name": "App information",
+ "nameForOfficeSuitApp": "App suite information"
+ },
+ "ScopeTypes": {
+ "allDevices": "All Devices",
+ "allUsers": "All Users",
+ "allUsersAndDevices": "All Users & All Devices",
+ "selectedGroups": "Selected Groups"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Description",
+ "placeholder": "Enter a description"
+ },
+ "NameTextBox": {
+ "label": "Name",
+ "placeholder": "Enter a name"
+ },
+ "PublisherTextBox": {
+ "label": "Publisher",
+ "placeholder": "Enter a publisher"
+ },
+ "VersionTextBox": {
+ "label": "Version"
+ },
+ "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
+ },
+ "ScopeTags": {
+ "headerDescription": "Select one or more groups to assign the script package."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Detection script",
+ "placeholder": "Input script text",
+ "requiredValidationMessage": "Please enter the detection script"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Enforce script signature check"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Run this script using the logged-on credentials"
+ },
+ "RemediationScript": {
+ "infoBox": "This script will run in detect-only mode because there is no remediation script."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Remediation script",
+ "placeholder": "Input script text"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Run script in 64-bit PowerShell"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
+ },
+ "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
+ "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
+ },
+ "title": "Create custom script",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Interval",
+ "time": "Date and time"
+ },
+ "Interval": {
+ "day": "Repeats every day",
+ "days": "Repeats every {0} days",
+ "hour": "Repeats every hour",
+ "hours": "Repeats every {0} hours",
+ "month": "Repeats every month",
+ "months": "Repeats every {0} months",
+ "week": "Repeats every week",
+ "weeks": "Repeats every {0} weeks"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) on {1}",
+ "withDate": "{0} on {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Edit - {0}"
+ }
+ },
+ "MinimumOperatingSystem": {
+ "Android": {
+ "v10": "Android 10.0",
+ "v11": "Android 11.0",
+ "v4": "Android 4.0 (Ice Cream Sandwich)",
+ "v403": "Android 4.0.3 (Ice Cream Sandwich)",
+ "v41": "Android 4.1 (Jelly Bean)",
+ "v42": "Android 4.2 (Jelly Bean)",
+ "v43": "Android 4.3 (Jelly Bean)",
+ "v44": "Android 4.4 (KitKat)",
+ "v5": "Android 5.0 (Lollipop)",
+ "v51": "Android 5.1 (Lollipop)",
+ "v6": "Android 6.0 (Marshmallow)",
+ "v7": "Android 7.0 (Nougat)",
+ "v71": "Android 7.1 (Nougat)",
+ "v8": "Android 8.0 (Oreo)",
+ "v81": "Android 8.1 (Oreo)",
+ "v9": "Android 9.0 (Pie)"
+ },
+ "IOS": {
+ "v10": "iOS 10.0",
+ "v11": "iOS 11.0",
+ "v12": "iOS 12.0",
+ "v13": "iOS 13.0",
+ "v14": "iOS 14.0",
+ "v15": "iOS 15.0",
+ "v16": "iOS 16.0",
+ "v17": "iOS 17.0",
+ "v8": "iOS 8.0",
+ "v9": "iOS 9.0"
+ },
+ "MacOS": {
+ "V10": {
+ "10": "OS X Yosemite 10.10",
+ "11": "OS X El Capitan 10.11",
+ "12": "macOS Sierra 10.12",
+ "13": "macOS High Sierra 10.13",
+ "14": "macOS Mojave 10.14",
+ "15": "macOS Catalina 10.15",
+ "7": "Mac OS X Lion 10.7",
+ "8": "OS X Mountain Lion 10.8",
+ "9": "OS X Mavericks 10.9"
+ },
+ "V11": {
+ "0": "macOS Big Sur 11.0"
+ },
+ "V12": {
+ "0": "macOS Monterey 12.0"
+ },
+ "V13": {
+ "0": "macOS Ventura 13.0"
+ },
+ "V14": {
+ "0": "macOS Sonoma 14.0"
+ }
+ },
+ "Windows": {
+ "V10Release": {
+ "release1607": "Windows 10 1607",
+ "release1703": "Windows 10 1703",
+ "release1709": "Windows 10 1709",
+ "release1803": "Windows 10 1803",
+ "release1809": "Windows 10 1809",
+ "release1903": "Windows 10 1903",
+ "release1909": "Windows 10 1909",
+ "release2004": "Windows 10 2004",
+ "release21H1": "Windows 10 21H1",
+ "release21H2": "Windows 10 21H2",
+ "release22H2": "Windows 10 22H2",
+ "release2H20": "Windows 10 20H2"
+ },
+ "V11Release": {
+ "release21H2": "Windows 11 21H2",
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
+ },
+ "v10": "Windows 10.0",
+ "v80": "Windows 8.0",
+ "v81": "Windows 8.1"
+ },
+ "WindowsPhone": {
+ "v80": "Windows Phone 8.0",
+ "v81": "Windows Phone 8.1"
+ }
+ },
+ "OfficeUpdateChannel": {
+ "current": "Current Channel",
+ "deferred": "Semi-Annual Enterprise Channel",
+ "firstReleaseCurrent": "Current Channel (Preview)",
+ "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
+ "monthlyEnterprise": "Monthly Enterprise Channel",
+ "placeHolder": "Select one"
+ },
+ "TableHeaders": {
+ "activity": "Activity",
+ "activityName": "Activity name",
+ "actor": "Initiated by (actor)",
+ "actorType": "Actor type",
+ "app": "App",
+ "appName": "App name",
+ "applicationName": "Application name",
+ "approvalType": "Approval method",
+ "assignedGroups": "Group",
+ "assignment": "Assignment",
+ "assignmentStatus": "Assigned",
+ "assignments": "Assignments",
+ "attributeName": "Attribute name",
+ "attributeType": "Attribute type",
+ "bundleId": "Bundle-Id",
+ "category": "Category",
+ "complianceGracePeriodExpiration": "Compliance grace period expiration",
+ "configurationType": "Profile type",
+ "conflictingPolicy": "Conflicting Policies",
+ "createdDate": "Created date",
+ "currentOs": "Current OS",
+ "date": "Date",
+ "dateRange": "Date range",
+ "deployed": "Deployed",
+ "description": "Description",
+ "device": "Device",
+ "deviceId": "Device ID",
+ "deviceName": "Device name",
+ "deviceOrApplicationName": "Device or application name",
+ "deviceReporting": "Devices reporting",
+ "diagnosticCode": "Diagnostic Code",
+ "diagnosticText": "Diagnostic Text",
+ "diagnostics": "Diagnostics",
+ "displayName": "Display name",
+ "driversToReview": "Drivers to review",
+ "eSIMActivationStatus": "Activation status",
+ "eSIMCellularStatus": "Cellular status",
+ "eSIMICCID": "ICCID",
+ "eSIMPoolName": "Cellular subscription",
+ "eSIMState": "eSIM state",
+ "eSIMTokenAmount": "Total eSIM activation codes",
+ "enabled": "Enabled",
+ "enabledPlatforms": "Enabled Platforms",
+ "encryptionReadiness": "Encryption Readiness",
+ "encryptionStatus": "Encryption Status",
+ "endTime": "End time",
+ "enrollment": "Enrollment",
+ "enrollmentAttempt": "Enrollment start",
+ "eventDateTime": "Timestamp",
+ "eventIdentifier": "Event ID",
+ "eventLevel": "Level",
+ "excluded": "Excluded",
+ "failure": "Failure",
+ "featureUpdateDeferral": "Feature Deferral",
+ "featureUpdateVersion": "Feature Update Version",
+ "featureUpdatesPaused": "Feature (Paused)",
+ "featureUpdatesStatus": "Feature",
+ "from": "From",
+ "groups": "Groups",
+ "groupsSelected": "Groups Selected",
+ "installationStatus": "Installation Status",
+ "issueId": "Issue id",
+ "lastCheckinTime": "Last Check-in Time",
+ "lastModified": "Last modified",
+ "lastScanTime": "Last Scan Time",
+ "lastSuccessfulSync": "Last Successful Sync",
+ "lastUpdated": "Last Updated",
+ "location": "Location",
+ "loggedInUser": "Logged in user",
+ "message": "Message",
+ "model": "Model",
+ "mtdConnector": "MTD Connector",
+ "name": "Profile name",
+ "oSVersion": "OS Version",
+ "operationType": "Operation type",
+ "os": "OS",
+ "packageName": "Package name",
+ "partnerName": "Partner",
+ "partnerStatus": "Partner status",
+ "permission": "Permission",
+ "platform": "Platform",
+ "policies": "Policies",
+ "policy": "Policy",
+ "policyType": "Policy type",
+ "preventedUpdateDays": "Restricted days",
+ "priority": "Priority",
+ "profiles": "Profiles",
+ "publicAddress": "Public address",
+ "publisher": "Publisher",
+ "qualityUpdateDeferral": "Quality Deferral",
+ "qualityUpdateRelease": "Quality Update Release",
+ "qualityUpdateVersion": "Quality Update Version",
+ "qualityUpdatesPaused": "Quality (Paused)",
+ "qualityUpdatesStatus": "Quality",
+ "reason": "Reason",
+ "resource": "Resource",
+ "roleName": "Name",
+ "roles": "Roles",
+ "scopeGroups": "Scope groups",
+ "scopeSize": "Assigned Scope Groups",
+ "scopeTags": "Scope tags",
+ "scriptName": "Script name",
+ "scriptType": "Script type",
+ "servicingOption": "Servicing channel",
+ "setting": "Setting",
+ "settings": "Settings",
+ "siteName": "Site name",
+ "source": "Source",
+ "sourceProfile": "Source Profile",
+ "startTime": "Start time",
+ "state": "State",
+ "stateDetails": "State details",
+ "status": "Status",
+ "subject": "Subject",
+ "support": "Support",
+ "supportEndDate": "Support End Date",
+ "tPMVersion": "TPM Version",
+ "target": "Target",
+ "timeWindows": "Time windows",
+ "timeZone": "Time zone",
+ "type": "Type",
+ "updateScheduleType": "Schedule type",
+ "updateStatus": "Update Status",
+ "user": "User",
+ "userPrincipalName": "User principal name",
+ "users": "Users",
+ "usersExcluded": "Users excluded",
+ "usersTargeted": "Users targeted",
+ "value": "Value",
+ "includedGroups": "Included Groups",
+ "excludedGroups": "Excluded Groups",
+ "licenseType": "License type"
+ },
+ "Inputs": {
+ "accountDomain": "Account domain",
+ "accountDomainHint": "e.g. contosodomain",
+ "accountDomainInfoBalloon": "Specify the user’s account domain.",
+ "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
+ "allowContactSetting": "Allow user to change contact setting",
+ "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
+ "allowUserChange": "Allow user to change setting",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
+ "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "App install context",
+ "appUrlLabel": "Appstore URL",
+ "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Applicable device type",
+ "assignmentActionLabel": "Mode",
+ "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
+ "authenticationMetod": "Authentication method",
+ "authenticationType": "Authentication type",
+ "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
+ "availableLicenseCount": "Available licenses",
+ "basicAuth": "Basic authentication",
+ "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
+ "bookNameLabel": "Book name",
+ "bundleDescriptionHint": "Enter a description that describes the apps included.",
+ "calendar": "Calendar",
+ "categoryLabel": "Category",
+ "categoryNameLabel": "Default name",
+ "certProfileType": "Certificate profile type",
+ "certificate": "Certificate",
+ "certificates": "Certificates",
+ "commandLineLabel": "Command-line arguments",
+ "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
+ "configurationSettingsFormatLabel": "Configuration settings format",
+ "configurationSettingsLabel": "Settings format",
+ "contactSync": "Save Contacts",
+ "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
+ "contacts": "Contacts",
+ "createdDateTime": "Created",
+ "defaultCategoryHint": "Default categories cannot be changed",
+ "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
+ "descriptionGenericLabel": "Description",
+ "descriptionHint": "Enter a description...",
+ "descriptionLabel": "Description",
+ "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
+ "developerLabel": "Developer",
+ "developerSizeHint": "The maximum length of the developer name is 256 characters.",
+ "disable": "Disable",
+ "disabled": "Disabled",
+ "displayNameLabel": "Name",
+ "displayVersionHint": "Enter the app version",
+ "displayVersionLabel": "App Version",
+ "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
+ "eBookCategoryNameLabel": "Default name",
+ "emailAccount": "Email account name",
+ "emailAccountHint": "e.g. Corporate Email",
+ "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
+ "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
+ "emailServer": "Email Server",
+ "emailServerHint": "e.g. mail.contoso.com",
+ "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
+ "enable": "Enable",
+ "enableSMime": "Enable S/MIME",
+ "enabled": "Enabled",
+ "encryptAllEmails": "Encrypt all emails",
+ "encryptionCertificates": "Encryption certificates",
+ "endUserNotifications": "End-user notifications",
+ "enrollmentTypeLabel": "Device enrollment type",
+ "externalRecipients": "External recipients MailTip",
+ "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
+ "focusedInbox": "Focused Inbox",
+ "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
+ "fullScreenEnabledLabel": "Full screen",
+ "gmailNineAmountOfEmail": "Amount of email to synchronize",
+ "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
+ "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
+ "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
+ "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
+ "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
+ "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
+ "ignoreManifestScope": "Ignore manifest scope",
+ "ignoreVersionDetection": "Ignore app version",
+ "informationUrlLabel": "Information URL",
+ "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
+ "installAsManaged": "Install as managed",
+ "installationSourceLabel": "App type",
+ "installerTypeInfoBalloon": "The installer type of the application package.",
+ "installerTypeLabel": "Installer Type",
+ "isFeatured": "Show this as a featured app in the Company Portal",
+ "isMAMEnabledToggleLabel": "Yes",
+ "lastModifiedDateTime": "Last updated Time",
+ "ldapUrl": "LDAP URL",
+ "licensingType": "Supports device context assignment",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimum operating system",
+ "modernAuth": "Modern authentication",
+ "nameHint": "Enter a name",
+ "nameLabel": "Name",
+ "nameSizeHint": "The maximum length of the name is 512 characters.",
+ "notConfigured": "Not configured",
+ "notesLabel": "Notes",
+ "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
+ "notificationType": "Notification type",
+ "oneDay": "One Day",
+ "oneMonth": "One Month",
+ "oneWeek": "One Week",
+ "outlookSMimeSettings": "Outlook S/MIME settings",
+ "ownerLabel": "Owner",
+ "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
+ "packageIdLabel": "Package Identifier",
+ "packageNameLabel": "Package name",
+ "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
+ "platformLabel": "Platform",
+ "policyDescriptionLabel": "Description",
+ "policyNameLabel": "Name",
+ "preComposedIconEnabled": "Precomposed",
+ "primarySMTPAddress": "Primary SMTP Address",
+ "privacyUrlLabel": "Privacy URL",
+ "publisherHint": "Enter a publisher name",
+ "publisherLabel": "Publisher",
+ "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
+ "require": "Require",
+ "requireBiometrics": "Require Biometrics to access app",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "At least one scope tag is required",
+ "searchAppLabel": "Select app",
+ "searchAppLinkText": "Search the App Store",
+ "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
+ "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
+ "selectAAD": "Select a Microsoft Entra attribute",
+ "selectAppFileLabel": "Select file",
+ "selectAppFileLinkText": "Select app package file",
+ "selectAppFileToUpdateLabel": "Select file to update",
+ "selectAuthMethod": "Select an authentication method",
+ "selectAuthType": "Select an authentication type",
+ "selectCatalogAppLabel": "Select app",
+ "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
+ "selectCertificate": "Select a certificate",
+ "signAllEmails": "Sign all emails",
+ "signingCertificates": "Signing certificates",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Suite Description",
+ "suiteNameLabel": "Suite Name",
+ "targetApplicationBundleIdentifier": "Target application bundle identifier",
+ "targetedPlatformsLabel": "Targeted platform",
+ "tasks": "Tasks",
+ "threeDays": "Three Days",
+ "totalLicenseCount": "Total licenses",
+ "twoWeeks": "Two Weeks",
+ "unifiedAssignmentsLabel": "Assign to:",
+ "unlimited": "Unlimited",
+ "urlHint": "Enter a valid url",
+ "useManagedBrowserHint": "Android and iOS only. Learn more",
+ "useManagedBrowserLabel": "Require a managed browser to open this link",
+ "userPrinicipalName": "User Principal Name",
+ "username": "Username",
+ "usernameAttribute": "Username attribute from Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
+ "usernamePassword": "Username and password",
+ "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
+ "webAppUrlLabel": "App URL",
+ "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
+ "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "XML Data Entered",
+ "xmlFormatInvalid": "XML policy format is invalid.",
+ "xmlTooLarge": "Input size must be less than 1 MB."
+ },
+ "CoManagementAuthority": {
+ "Confirmation": {
+ "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
+ "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
+ },
+ "Grid": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
+ "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
+ "label": "Co-management authority"
+ },
+ "Header": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
+ },
+ "Main": {
+ "title": "Co-management Authority"
+ },
+ "MessageSaved": {
+ "body": "Co-management authority policy created."
+ },
+ "Notification": {
+ "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
+ "created": "This Co-management authority policy has not been assigned to any users.",
+ "creating": "Creating Co-management authority policy",
+ "creatingMessage": "Creating {0} Co-management authority policy",
+ "deleteError": "An error occurred while deleting Co-management authority policy",
+ "deleted": "Co-management authority policy deleted.",
+ "deletedMessage": "{0} Co-management authority policy is deleted.",
+ "deleting": "Deleting Co-management Authority policy",
+ "deletingMessage": "Deleting {0} Co-management Authority policy",
+ "fetchError": "An error occurred while displaying Co-management authority policies",
+ "saved": "Co-management Authority saved.",
+ "savedMessage": "{0} Co-management Authority policy successfully saved.",
+ "saving": "Saving Co-management authority",
+ "savingMessage": "Saving {0} Co-management authority policy"
+ },
+ "Priority": {
+ "saveError": "An error occurred while saving Co-management authority priorities",
+ "saved": "Co-management authority priorities were successfully saved."
+ },
+ "ReloadNotification": {
+ "description": "Reload the Co-management authority policy to try again.",
+ "title": "Reload the Co-management authority blade"
+ },
+ "advancedProperty": "Advanced",
+ "commandLineArgs": "Client installation command line arguments.",
+ "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
+ "enterArgument": "Enter argument",
+ "installAgent": "Automatically install Configuration Manager agent.",
+ "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
+ "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
+ "pageDescription": "Co-management authority profiles",
+ "pageSetting": "Co-management authority Setting",
+ "pageTitle": "Co-management authority",
+ "settingDescription": "The co-management settings determine who owns the workloads."
+ },
+ "AzureIAMCommon": {
+ "Recommended": "Recommended",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrain",
+ "countryNameZA": "South Africa",
+ "countryNameJO": "Jordan",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Czech Republic",
+ "countryNameLT": "Lithuania",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hong Kong SAR",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Saudi Arabia",
+ "countryNamePG": "Papua New Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "India",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Romania",
+ "countryNameKZ": "Kazakhstan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Georgia",
+ "countryNameTT": "Trinidad and Tobago",
+ "countryNameMP": "Northern Mariana Islands",
+ "countryNameMV": "Maldives",
+ "countryNameFI": "Finland",
+ "countryNameNO": "Norway",
+ "countryNameEE": "Estonia",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Uzbekistan",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tajikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "France",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italy",
+ "countryNameAZ": "Azerbaijan",
+ "countryNameKG": "Kyrgyzstan",
+ "countryNameWF": "Wallis and Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falkland Islands (Islas Malvinas)",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "South Sudan",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Syria",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "Saint Vincent and the Grenadines",
+ "countryNameID": "Indonesia",
+ "countryNameRE": "Reunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "North Macedonia",
+ "countryNameTG": "Togo",
+ "countryNamePF": "French Polynesia",
+ "countryNameKY": "Cayman Islands",
+ "countryNameIO": "British Indian Ocean Territory",
+ "countryNameRU": "Russia",
+ "countryNameMA": "Morocco",
+ "countryNameAU": "Australia",
+ "countryNameBO": "Bolivia",
+ "countryNameVA": "Holy See (Vatican City State)",
+ "countryNameVG": "Virgin Islands, British",
+ "countryNameFM": "Micronesia",
+ "countryNameAQ": "Antarctica",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brazil",
+ "countryNameIS": "Iceland",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgaria",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamas, The",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macao SAR",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "American Samoa",
+ "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
+ "countryNameMF": "Saint Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "New Caledonia",
+ "countryNameAC": "Ascension Island",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladesh",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Canada",
+ "countryNameSH": "Saint Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolia",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Cameroon",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japan",
+ "countryNameCY": "Cyprus",
+ "countryNameCD": "Democratic Republic of Congo",
+ "countryNameTN": "Tunisia",
+ "countryNameTR": "Türkiye",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Sweden",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Cambodia",
+ "countryNamePL": "Poland",
+ "countryNameDZ": "Algeria",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Egypt",
+ "countryNameGF": "French Guiana",
+ "countryNameNZ": "New Zealand",
+ "countryNamePS": "Palestinian Authority",
+ "countryNameIL": "Israel",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Greece",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauritania",
+ "countryNameVI": "Virgin Islands, U.S.",
+ "countryNameGQ": "Equatorial Guinea",
+ "countryNameMX": "Mexico",
+ "countryNameDJ": "Djibouti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "China",
+ "countryNameMZ": "Mozambique",
+ "countryNameBV": "Bouvet Island",
+ "countryNameNF": "Norfolk Island",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "South Georgia and the South Sandwich Islands",
+ "countryNameRS": "Serbia",
+ "countryNameCC": "Cocos (Keeling) Islands",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Germany",
+ "countryNameCG": "Republic of Congo",
+ "countryNameKW": "Kuwait",
+ "countryNameMH": "Marshall Islands",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarus",
+ "countryNameMY": "Malaysia",
+ "countryNameST": "São Tomé and Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Chad",
+ "countryNameCX": "Christmas Island",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bissau",
+ "countryNameUA": "Ukraine",
+ "countryNameCU": "Cuba",
+ "countryNameCO": "Colombia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Croatia",
+ "countryNameSC": "Seychelles",
+ "countryNameNL": "Netherlands",
+ "countryNameUM": "US Minor Outlying Islands",
+ "countryNameIM": "Isle of Man",
+ "countryNameFJ": "Fiji",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "United Kingdom",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovenia",
+ "countryNameAM": "Armenia",
+ "countryNameAR": "Argentina",
+ "countryNamePM": "Saint Pierre and Miquelon",
+ "countryNameTF": "French Southern and Antarctic Lands",
+ "countryNameDO": "Dominican Republic",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "Central African Republic",
+ "countryNameBE": "Belgium",
+ "countryNameKM": "Comoros",
+ "countryNameLY": "Libya",
+ "countryNameIE": "Ireland",
+ "countryNameKP": "North Korea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slovakia",
+ "countryNameTC": "Turks and Caicos Islands",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Yemen",
+ "countryNameBA": "Bosnia and Herzegovina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Iraq",
+ "countryNameSJ": "Svalbard and Jan Mayen Island",
+ "countryNameAX": "Åland Islands",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Faroe Islands",
+ "countryNameBL": "Saint Barthélemy",
+ "countryNameLB": "Lebanon",
+ "countryNameJM": "Jamaica",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Spain",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapore",
+ "countryNameAL": "Albania",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d’Ivoire",
+ "countryNameTW": "Taiwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cook Islands",
+ "countryNameTH": "Thailand",
+ "countryNameHM": "Heard Island and McDonald Islands",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "United States",
+ "countryNameAT": "Austria",
+ "countryNameKR": "Korea, Republic of",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Denmark",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Ethiopia",
+ "countryNameMG": "Madagascar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxembourg",
+ "countryNameQA": "Qatar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Solomon Islands",
+ "countryNameAE": "United Arab Emirates",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua and Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Hungary",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Switzerland",
+ "countryNamePN": "Pitcairn Islands",
+ "countryNameGL": "Greenland",
+ "countryNamePH": "Philippines",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts and Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Latvia",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Author",
+ "template": "Template name"
+ },
+ "Row": {
+ "ariaLabel": "row {0} of {1} column {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Start from scratch and select settings you want from the library of available settings",
+ "title": "Settings catalog"
+ },
+ "Templates": {
+ "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
+ "title": "Templates"
+ },
+ "noData": "No policy templates found"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Endpoint detection and response"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "App and browser isolation",
+ "aSRApplicationControl": "Application control",
+ "aSRAttackSurfaceReduction": "Attack surface reduction rules",
+ "aSRDeviceControl": "Device control",
+ "aSRExploitProtection": "Exploit protection",
+ "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
+ "aVExclusions": "Microsoft Defender Antivirus exclusions",
+ "antivirus": "Microsoft Defender Antivirus",
+ "cloudPC": "Windows 365 Security Baseline",
+ "default": "Endpoint Security",
+ "defenderTest": "Microsoft Defender for Endpoint demo",
+ "diskEncryption": "BitLocker",
+ "eDR": "Endpoint detection and response",
+ "edgeSecurityBaseline": "Microsoft Edge baseline",
+ "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
+ "editionUpgradeConfiguration": "Edition upgrade and mode switch",
+ "firewall": "Windows Firewall",
+ "firewallRules": "Windows Firewall rules",
+ "identityProtection": "Account protection",
+ "identityProtectionPreview": "Account protection (preview)",
+ "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
+ "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
+ "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
+ "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS firewall",
+ "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
+ "office365Baseline": "Microsoft Office O365 baseline",
+ "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
+ "securityBaselines": "Security Baselines",
+ "test": "Test Template",
+ "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
+ "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
+ "windowsSecurityExperience": "Windows Security experience"
+ },
+ "Firewall": {
+ "mDE": "Windows Firewall"
+ },
+ "FirewallRules": {
+ "mDE": "Windows Firewall Rules"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Account Protection",
+ "administrativeTemplates": "Administrative Templates",
+ "androidCompliancePolicy": "Android compliance policy",
+ "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
+ "applicationControl": "App Control for Business",
+ "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
+ "bitlocker": "BitLocker",
+ "custom": "Custom",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedPersonalIdentityVerificationCredential": "Derived credential",
+ "deviceControl": "Device Control",
+ "deviceFeatures": "Device features",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Device Lock",
+ "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
+ "deviceRestrictions": "Device restrictions",
+ "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
+ "domainJoinPreview": "Domain Join",
+ "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
+ "education": "Education",
+ "email": "Email",
+ "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
+ "endpointProtection": "Endpoint protection",
+ "expeditedCheckin": "Mobile device management configuration",
+ "exploitProtection": "Exploit Protection",
+ "extensions": "Extensions",
+ "hardwareConfigurations": "BIOS Configurations and other settings",
+ "identityProtection": "Identity protection",
+ "iosCompliancePolicy": "iOS compliance policy",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Local user group membership",
+ "macCompliancePolicy": "Mac compliance policy",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
+ "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
+ "microsoftDefenderFirewallRules": "Windows Firewall Rules",
+ "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
+ "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
+ "mxProfileZebraOnly": "MX profile (Zebra only)",
+ "networkBoundary": "Network boundary",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Override Group Policy",
+ "pkcsCertificate": "PKCS certificate",
+ "pkcsImportedCertificate": "PKCS imported certificate",
+ "preferenceFile": "Preference file",
+ "presets": "Presets",
+ "scepCertificate": "SCEP certificate",
+ "secureAssessmentEducation": "Secure assessment (Education)",
+ "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
+ "settingsCatalog": "Settings Catalog",
+ "sharedMultiUserDevice": "Shared multi-user device",
+ "softwareUpdates": "Software Updates",
+ "trustedCertificate": "Trusted certificate",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi import",
+ "windows10CompliancePolicy": "Windows 10/11 compliance policy",
+ "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
+ "windows10XScep": "SCEP certificate - TEST",
+ "windows10XTrustedCertificate": "Trusted certificate - TEST",
+ "windows10XVPN": "VPN - TEST",
+ "windows10XWifi": "WIFI - TEST",
+ "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
+ "windows365SecurityBaseline": "Windows 365 Security Baseline",
+ "windows8CompliancePolicy": "Windows 8 compliance policy",
+ "windowsHealthMonitoring": "Windows health monitoring",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
+ "windowsUpdateforBusiness": "Windows Update for Business",
+ "wiredNetwork": "Wired network",
+ "workProfile": "Personally-owned work profile"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Make update available gradually",
+ "immediateStart": "Make update available as soon as possible",
+ "startDateOnly": "Make update available on a specific date"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Auto deny",
+ "autoGrant": "Auto grant",
+ "prompt": "Prompt"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Location access (coarse)",
+ "accessFineLocation": "Location access (fine)",
+ "addVoicemail": "Add voicemail",
+ "bodySensors": "Allow body sensor data",
+ "bodySensorsBackground": "Allow background body sensor data",
+ "callPhone": "Make phone calls",
+ "camera": "Camera",
+ "getAccounts": "Get accounts",
+ "nearbyDevices": "Nearby Devices",
+ "nearbyWifiDevices": "Nearby Wifi Devices",
+ "postNotifications": "Post notifications",
+ "processOutgoingCalls": "Process outgoing calls",
+ "readCalendar": "Calendar (read)",
+ "readCallLog": "Call log (read)",
+ "readContacts": "Contacts (read)",
+ "readExternalStorage": "External storage (read)",
+ "readMediaAudio": "Media Audio (read)",
+ "readMediaImages": "Media Images (read)",
+ "readMediaVideo": "Media Video (read)",
+ "readPhoneState": "Phone state (read)",
+ "readSMS": "SMS (read)",
+ "receiveMMS": "MMS (receive)",
+ "receiveSMS": "SMS (receive)",
+ "receiveWAPPush": "WAP push messages (receive)",
+ "recordAudio": "Record audio",
+ "sendSMS": "SMS (send)",
+ "useSIP": "Use SIP service",
+ "writeCalendar": "Calendar (write)",
+ "writeCallLog": "Call log (write)",
+ "writeContacts": "Contacts (write)",
+ "writeExternalStorage": "External storage (write)"
+ },
+ "RemoveDialog": {
+ "description": "Are you sure you want to remove the permission?",
+ "title": "Remove"
+ },
+ "TableHeader": {
+ "permission": "Permission",
+ "permissionGroup": "Permission group",
+ "permissionName": "Permission name",
+ "permissionState": "Permission state"
+ },
+ "addButtonLabel": "+Add",
+ "addPermissionTableDescription": "Specify permissions you want to override. If they are not chosen/specified explicitly, then the default behavior will apply.",
+ "addPermissionsTitle": "Add permissions",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Learn more about Android runtime permissions",
+ "permissionTableDescription": "Permissions granted here will override the “Default app permissions” policy for the selected apps.",
+ "permissionsTitle": "Permissions"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search as default",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype for Business",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "The file or folder as the selected requirement.",
+ "pathToolTip": "The complete path of the file or folder to detect.",
+ "property": "Property",
+ "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "GridColumns": {
+ "pathOrScript": "Path/Script",
+ "type": "Type"
+ },
+ "Registry": {
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the comparison.",
+ "registryRequirement": "Registry key requirement",
+ "registryRequirementTooltip": "Select the registry key requirement comparison.",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the required registry value."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "File",
+ "registry": "Registry",
+ "script": "Script"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Boolean",
+ "dateTime": "Date and Time",
+ "float": "Floating Point",
+ "integer": "Integer",
+ "string": "String",
+ "version": "Version"
+ },
+ "duplicateName": "Script name {0} has already been used. Please enter a different name.",
+ "enforceSignatureCheck": "Enforce script signature check",
+ "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
+ "loggedOnCredentials": "Run this script using the logged on credentials",
+ "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
+ "operatorTooltip": "Select the operator for the requirement comparison.",
+ "requirementMethod": "Select output data type",
+ "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
+ "scriptName": "Script name",
+ "value": "Value",
+ "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "bladeTitle": "Add a Requirement rule",
+ "createRequirementHeader": "Create a requirement.",
+ "header": "Configure additional requirement rules",
+ "label": "Additional requirement rules",
+ "noRequirementsSelectedPlaceholder": "No requirements are specified.",
+ "requirementType": "Requirement type",
+ "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
+ },
+ "architectures": "Operating system architecture",
+ "architecturesTooltip": "Choose the architectures needed to install the app.",
+ "bladeTitle": "Requirements",
+ "diskSpace": "Disk space required (MB)",
+ "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
+ "header": "Specify the requirements that devices must meet before the app is installed:",
+ "maximumTextFieldValue": "The value must be at most {0}.",
+ "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
+ "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
+ "minimumLogicalProcessors": "Minimum number of logical processors required",
+ "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
+ "minimumOperatingSystem": "Minimum operating system",
+ "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
+ "minumumTextFieldValue": "The value must be at least {0}.",
+ "physicalMemory": "Physical memory required (MB)",
+ "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
+ "selectorLabel": "Requirements",
+ "validNumber": "Please enter a valid number."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filter",
+ "assignmentFilterTypeColumnHeader": "Filter mode",
+ "assignmentToast": "End user notifications",
+ "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
+ "autoUpdate": "Auto-update",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
+ "groupTableHeader": "Group",
+ "installContextLabel": "Install Context",
+ "isRemovable": "Install as removable",
+ "licenseTypeLabel": "License type",
+ "modeTableHeader": "Group mode",
+ "policySet": "Policy Set",
+ "preventAutoAppUpdate": "Prevent automatic app updates",
+ "preventManagedAppBackup": "Prevent iCloud app backup",
+ "restartGracePeriodHeader": "Restart grace period",
+ "startTimeColumnLabel": "Availability",
+ "tracks": "Tracks",
+ "uninstallOnRemoval": "Uninstall on device removal",
+ "updateMode": "Update Priority",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD web app",
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office Suite",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeAddIn": "Office add-in",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "sharePointApp": "SharePoint app",
+ "teamsApp": "Teams app",
+ "webApp": "Web link",
+ "win32CatalogApp": "Windows catalog app (Win32)",
+ "winGetPublicApp": "Windows Package Manager Community Repository",
+ "winGetStoreApp": "Microsoft Store app (new)",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "AssignmentToast": {
+ "hideAll": "Hide all toast notifications",
+ "showAll": "Show all toast notifications",
+ "showReboot": "Show toast notifications for computer restarts"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Yes",
+ "notConfigured": "No"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "App install may force a device restart",
+ "basedOnReturnCode": "Determine behavior based on return codes",
+ "force": "Intune will force a mandatory device restart",
+ "suppress": "No specific action"
+ },
+ "FilterType": {
+ "exclude": "Exclude",
+ "include": "Include",
+ "none": "None"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "notApplicable": "Not applicable",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "SettingType": {
+ "assignmentType": "Assignment type",
+ "deviceLicensing": "License type",
+ "installContext": "Uninstall on device removal",
+ "toastSettings": "End user notifications",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Default",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Failed",
+ "hardReboot": "Hard reboot",
+ "retry": "Retry",
+ "softReboot": "Soft reboot",
+ "success": "Success"
+ },
+ "Columns": {
+ "codeType": "Code type",
+ "returnCode": "Return code"
+ },
+ "bladeTitle": "Return codes",
+ "gridAriaLabel": "Return codes",
+ "header": "Specify return codes to indicate post-installation behavior:",
+ "onAddAnnounceMessage": "Return code added item {0} of {1}",
+ "onDeleteSuccess": "Return code {0} deleted successfully",
+ "returnCodeAlreadyUsedValidation": "Return code is already used.",
+ "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
+ "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
+ "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
+ "selectorLabel": "Return codes"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone and iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Add network boundary",
+ "addNetworkBoundaryButton": "Add network boundary...",
+ "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
+ "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
+ "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
+ "boundaryType": "Boundary type",
+ "cloudResources": "Cloud resources",
+ "corporateIdentity": "Corporate identity",
+ "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
+ "editNetworkBoundary": "Edit network boundary",
+ "enrollmentState": "Enrollment state",
+ "iPv4Ranges": "IPv4 ranges",
+ "iPv6Ranges": "IPv6 ranges",
+ "internalProxyServers": "Internal proxy servers",
+ "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
+ "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
+ "mdmDiscoveryUrl": "MDM discovery URL",
+ "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
+ "minimumPinLength": "Set the minimum number of characters required for the PIN",
+ "name": "Name",
+ "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
+ "networkBoundary": "Network boundary",
+ "networkDomainNames": "Network domains",
+ "neutralResources": "Neutral resources",
+ "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
+ "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
+ "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
+ "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
+ "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
+ "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
+ "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
+ "protectedDomainNames": "Protected domains",
+ "proxyServers": "Proxy servers",
+ "requireAppPin": "Disable app PIN when device PIN is managed",
+ "requiredSettings": "Required settings",
+ "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
+ "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
+ "revokeOnUnenroll": "Revoke encryption keys on unenroll",
+ "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
+ "showWipIcon": "Show the enterprise data protection icon",
+ "type": "Type",
+ "useRmsForWip": "Use Azure RMS for WIP",
+ "value": "Value",
+ "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
+ "wipProtectionMode": "Windows Information Protection mode",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabic",
+ "bulgarian": "Bulgarian",
+ "chineseSimplified": "Chinese (Simplified)",
+ "chineseTraditional": "Chinese (Traditional)",
+ "croatian": "Croatian",
+ "czech": "Czech",
+ "danish": "Danish",
+ "dutch": "Dutch",
+ "englishUK": "English (United Kingdom)",
+ "englishUS": "English (United States)",
+ "estonian": "Estonian",
+ "finnish": "Finnish",
+ "frenchCanada": "French (Canada)",
+ "frenchFrance": "French (France)",
+ "german": "German",
+ "greek": "Greek",
+ "hebrew": "Hebrew",
+ "hungarian": "Hungarian",
+ "italian": "Italian",
+ "japanese": "Japanese",
+ "korean": "Korean",
+ "latvian": "Latvian",
+ "lithuanian": "Lithuanian",
+ "norwegian": "Norwegian, Bokmål",
+ "polish": "Polish",
+ "portugueseBrazil": "Portuguese (Brazil)",
+ "portuguesePortugal": "Portuguese (Portugal)",
+ "romanian": "Romanian",
+ "russian": "Russian",
+ "serbian": "Serbian",
+ "slovak": "Slovak",
+ "slovenian": "Slovenian",
+ "spanishMexico": "Spanish (Mexico)",
+ "spanishSpain": "Spanish (Spain)",
+ "swedish": "Swedish",
+ "thai": "Thailand",
+ "turkish": "Turkish",
+ "ukrainian": "Ukrainian"
+ },
+ "Summary": {
+ "placeholder": "Select a notification message from the left to preview contents."
+ },
+ "companyContact": "Show contact information",
+ "companyLogo": "Show company logo",
+ "companyName": "Show company name",
+ "createEditDescription": "Create or edit notification message templates.",
+ "createMessage": "Create message",
+ "deviceDetails": "Show device details",
+ "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
+ "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
+ "editMessage": "Edit message",
+ "email": "email",
+ "emailFooterTitle": "Email Footer",
+ "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
+ "emailHeaderTitle": "Email Header",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Configure Customization settings",
+ "formSubTitle": "Create or modify notification emails",
+ "headerFooterSettingsTab": "Header and footer settings",
+ "imgPreview": "Image Preview",
+ "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
+ "iwLink": "Show company portal website link",
+ "listEmpty": "No message templates.",
+ "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "listSubTitle": "List of notification message templates",
+ "listTitle": "Notification message templates",
+ "localizedNotificationMessageTemplates": "Localized notification message templates",
+ "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
+ "messageCapitalized": "Notification message template",
+ "messageLowercase": "notification message template",
+ "missingDefaultError": "Select a default template",
+ "notificationMessageTemplates": "Notification message templates",
+ "rowValidationError": "At least one message template is required",
+ "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "tenantValueText": "Tenant Value",
+ "testEmailLabel": "Send preview email",
+ "localeLabel": "Locale",
+ "isDefaultLocale": "Is Default"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Configure devices for initial provisioning.",
+ "title": "Device preparation"
+ },
+ "EnrollmentSettings": {
+ "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
+ "title": "Enrollment settings"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
+ "menuTitle": "Windows operating system recovery configuration"
+ },
+ "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
+ "coManagementAuthorityTitle": "Co-management Settings ",
+ "deploymentProfiles": "Windows Autopilot deployment profiles",
+ "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
+ "descriptionLabel": "Windows enrollment methods",
+ "enrollmentStatusPage": "Enrollment Status Page"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Select the number of bits contained in the key.",
+ "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
+ "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
+ "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
+ "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Subject alternative name",
+ "subjectNameFormat": "Subject name format",
+ "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
+ },
+ "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
+ "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
+ "configurationSettingsFormat": "Configuration settings format text",
+ "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
+ "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
+ "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
+ "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Select runtime permissions for the associated app.",
+ "policyAssociatedApp": "Select the app that this policy will be associated with.",
+ "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
+ "policyDescription": "Optionally, enter a description for this configuration policy.",
+ "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
+ "policyName": "Enter a name for this configuration policy.",
+ "policyPlatform": "Select the platform this app configuration policy will apply to.",
+ "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
+ "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
+ "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
+ "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
+ "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
+ "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
+ "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
+ "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
+ "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
+ "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
+ "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
+ "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "header": "Are you sure you want to delete this restriction?"
+ },
+ "DeviceLimit": {
+ "description": "Specify the maximum number of devices a user can enroll.",
+ "header": "Device limit restrictions",
+ "info": "Define how many devices each user can enroll."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Must be 1.0 or greater.",
+ "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
+ "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
+ "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
+ "min": "Minimum cannot be lower than {0}",
+ "minMax": "Minimum version cannot be greater than maximum version.",
+ "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
+ "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
+ },
+ "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
+ "blockManufacturerPlaceHolder": "Manufacturer name",
+ "blockManufacturersHeader": "Blocked manufacturers",
+ "cannotRestrict": "Restriction not supported",
+ "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
+ "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
+ "configurations": "Configure platforms",
+ "deviceManufacturer": "Device manufacturer",
+ "header": "Device type restrictions",
+ "info": "Define which platforms, versions, and management types can enroll.",
+ "manufacturer": "Manufacturer",
+ "max": "Max",
+ "maxVersion": "Maximum version",
+ "min": "Min",
+ "minVersion": "Minimum version",
+ "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
+ "personal": "Personally owned",
+ "platform": "Platform",
+ "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
+ "platformSettings": "Platform settings",
+ "platforms": "Select platforms",
+ "platformsSelected": "{0} platforms selected",
+ "type": "Type",
+ "versions": "versions",
+ "versionsRange": "Allow min/max range:",
+ "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Restriction Priorities were successfully saved."
+ },
+ "Row": {
+ "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
+ },
+ "Table": {
+ "deployed": "Deployed",
+ "name": "Name",
+ "priority": "Priority"
+ },
+ "Type": {
+ "limit": "Device limit restriction",
+ "type": "Device type restriction"
+ },
+ "allUsers": "All Users",
+ "androidRestrictions": "Android restrictions",
+ "create": "Create restriction",
+ "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
+ "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
+ "deleteTitle": "Are you sure you want to delete {0} restriction?",
+ "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
+ "edit": "Edit restriction",
+ "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
+ "iosRestrictions": "iOS restrictions",
+ "mDM": "MDM",
+ "macRestrictions": "macOS restrictions",
+ "maxVersion": "Max Version",
+ "minVersion": "Min Version",
+ "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
+ "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
+ "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
+ "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
+ "notFound": "Restriction not found. It may have already been deleted.",
+ "personallyOwned": "Personally owned devices",
+ "restriction": "Restriction",
+ "restrictionLowerCase": "restriction",
+ "restrictionType": "Restriction type",
+ "selectType": "Select restriction type",
+ "selectValidation": "Please select a platform",
+ "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
+ "typeRequired": "Restriction type is required.",
+ "winPhoneRestrictions": "Windows Phone restrictions",
+ "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
+ "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
+ "windowsRestrictions": "Windows restrictions",
+ "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 day",
+ "twoDays": "2 days",
+ "zeroDays": "0 days"
+ },
+ "SecurityTemplate": {
+ "aSR": "Attack surface reduction",
+ "accountProtection": "Account protection",
+ "allDevices": "All devices",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Antivirus Reporting (Preview)",
+ "conditionalAccess": "Conditional access",
+ "deviceCompliance": "Device compliance",
+ "diskEncryption": "Disk encryption",
+ "eDR": "Endpoint detection and response",
+ "ePM": "Endpoint Privilege Management",
+ "firewall": "Firewall",
+ "helpSupport": "Help and support",
+ "setup": "Setup",
+ "wdapt": "Microsoft Defender for Endpoint"
+ },
"OutlookAppConfig": {
"DataProtectionConfiguration": {
"header": "Data Protection configuration"
@@ -100,693 +1787,622 @@
"themesEnabledTitle": "Themes Enabled",
"themesEnabledTooltip": "Specify if the user is allowed to use a custom visual theme."
},
- "Languages": {
- "ar-aE": "Arabic (U.A.E.)",
- "ar-bH": "Arabic (Bahrain)",
- "ar-dZ": "Arabic (Algeria)",
- "ar-eG": "Arabic (Egypt)",
- "ar-iQ": "Arabic (Iraq)",
- "ar-jO": "Arabic (Jordan)",
- "ar-kW": "Arabic (Kuwait)",
- "ar-lB": "Arabic (Lebanon)",
- "ar-lY": "Arabic (Libya)",
- "ar-mA": "Arabic (Morocco)",
- "ar-oM": "Arabic (Oman)",
- "ar-qA": "Arabic (Qatar)",
- "ar-sA": "Arabic (Saudi Arabia)",
- "ar-sY": "Arabic (Syria)",
- "ar-tN": "Arabic (Tunisia)",
- "ar-yE": "Arabic (Yemen)",
- "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
- "az-latn": "Azerbaijani (Latin, Azerbaijan)",
- "bn-bD": "Bangla (Bangladesh)",
- "bn-iN": "Bangla (India)",
- "bs-cyrl": "Bosnian (Cyrillic)",
- "bs-latn": "Bosnian (Latin)",
- "zh-cN": "Chinese (PRC)",
- "zh-hK": "Chinese (Hong Kong S.A.R.)",
- "zh-mO": "Chinese (Macao S.A.R.)",
- "zh-sG": "Chinese (Singapore)",
- "zh-tW": "Chinese (Taiwan)",
- "hr-bA": "Croatian (Latin)",
- "hr-hR": "Croatian (Croatia)",
- "nl-bE": "Dutch (Belgium)",
- "nl-nL": "Dutch (Netherlands)",
- "en-aU": "English (Australia)",
- "en-bZ": "English (Belize)",
- "en-cA": "English (Canada)",
- "en-cabn": "English (Caribbean)",
- "en-iE": "English (Ireland)",
- "en-iN": "English (India)",
- "en-jM": "English (Jamaica)",
- "en-mY": "English (Malaysia)",
- "en-nZ": "English (New Zealand)",
- "en-pH": "English (Republic of the Philippines)",
- "en-sG": "English (Singapore)",
- "en-tT": "English (Trinidad and Tobago)",
- "en-uK": "English (United Kingdom)",
- "en-uS": "English (United States)",
- "en-zA": "English (South Africa)",
- "en-zW": "English (Zimbabwe)",
- "fr-bE": "French (Belgium)",
- "fr-cA": "French (Canada)",
- "fr-cH": "French (Switzerland)",
- "fr-fR": "French (France)",
- "fr-lU": "French (Luxembourg)",
- "fr-mC": "French (Monaco)",
- "de-aT": "German (Austria)",
- "de-cH": "German (Switzerland)",
- "de-dE": "German (Germany)",
- "de-lI": "German (Liechtenstein)",
- "de-lU": "German (Luxembourg)",
- "iu-cans": "Inuktitut (Syllabics, Canada)",
- "iu-latn": "Inuktitut (Latin, Canada)",
- "it-cH": "Italian (Switzerland)",
- "it-iT": "Italian (Italy)",
- "ms-bN": "Malay (Brunei Darussalam)",
- "ms-mY": "Malay (Malaysia)",
- "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
- "mn-mN": "Mongolian (Cyrillic, Mongolia)",
- "no-nB": "Norwegian, Bokmål (Norway)",
- "no-nn": "Norwegian, Nynorsk (Norway)",
- "pt-bR": "Portuguese (Brazil)",
- "pt-pT": "Portuguese (Portugal)",
- "quz-bO": "Quechua (Bolivia)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Peru)",
- "smj-nO": "Sami, Lule (Norway)",
- "smj-sE": "Sami, Lule (Sweden)",
- "se-fI": "Sami, Northern (Finland)",
- "se-nO": "Sami, Northern (Norway)",
- "se-sE": "Sami, Northern (Sweden)",
- "sma-nO": "Sami, Southern (Norway)",
- "sma-sE": "Sami, Southern (Sweden)",
- "smn": "Sami, Inari (Finland)",
- "sms": "Sami, Skolt (Finland)",
- "sr-Cyrl-bA": "Serbian (Cyrillic)",
- "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
- "sr-Latn-bA": "Serbian (Latin)",
- "sr-Latn-rS": "Serbian (Latin, Serbia)",
- "dsb": "Lower Sorbian (Germany)",
- "hsb": "Upper Sorbian (Germany)",
- "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
- "es-aR": "Spanish (Argentina)",
- "es-bO": "Spanish (Bolivia)",
- "es-cL": "Spanish (Chile)",
- "es-cO": "Spanish (Colombia)",
- "es-cR": "Spanish (Costa Rica)",
- "es-dO": "Spanish (Dominican Republic)",
- "es-eC": "Spanish (Ecuador)",
- "es-eS": "Spanish (Spain)",
- "es-gT": "Spanish (Guatemala)",
- "es-hN": "Spanish (Honduras)",
- "es-mX": "Spanish (Mexico)",
- "es-nI": "Spanish (Nicaragua)",
- "es-pA": "Spanish (Panama)",
- "es-pE": "Spanish (Peru)",
- "es-pR": "Spanish (Puerto Rico)",
- "es-pY": "Spanish (Paraguay)",
- "es-sV": "Spanish (El Salvador)",
- "es-uS": "Spanish (United States)",
- "es-uY": "Spanish (Uruguay)",
- "es-vE": "Spanish (Venezuela)",
- "sv-fI": "Swedish (Finland)",
- "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
- "uz-latn": "Uzbek (Latin, Uzbekistan)",
- "af": "Afrikaans (South Africa)",
- "sq": "Albanian (Albania)",
- "am": "Amharic (Ethiopia)",
- "hy": "Armenian (Armenia)",
- "as": "Assamese (India)",
- "ba": "Bashkir (Russia)",
- "eu": "Basque (Basque)",
- "be": "Belarusian (Belarus)",
- "br": "Breton (France)",
- "bg": "Bulgarian (Bulgaria)",
- "ca": "Catalan (Catalan)",
- "co": "Corsican (France)",
- "cs": "Czech (Czech Republic)",
- "da": "Danish (Denmark)",
- "dv": "Divehi (Maldives)",
- "et": "Estonian (Estonia)",
- "fo": "Faroese (Faroe Islands)",
- "fil": "Filipino (Philippines)",
- "fi": "Finnish (Finland)",
- "gl": "Galician (Galician)",
- "ka": "Georgian (Georgia)",
- "el": "Greek (Greece)",
- "gu": "Gujarati (India)",
- "ha": "Hausa (Latin, Nigeria)",
- "he": "Hebrew (Israel)",
- "hi": "Hindi (India)",
- "hu": "Hungarian (Hungary)",
- "is": "Icelandic (Iceland)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonesian (Indonesia)",
- "ga": "Irish (Ireland)",
- "xh": "isiXhosa (South Africa)",
- "zu": "isiZulu (South Africa)",
- "ja": "Japanese (Japan)",
- "kn": "Kannada (India)",
- "kk": "Kazakh (Kazakhstan)",
- "km": "Khmer (Cambodia)",
- "rw": "Kinyarwanda (Rwanda)",
- "sw": "Kiswahili (Kenya)",
- "kok": "Konkani (India)",
- "ko": "Korean (Korea)",
- "ky": "Kyrgyz (Kyrgyzstan)",
- "lo": "Lao (Lao P.D.R.)",
- "lv": "Latvian (Latvia)",
- "lt": "Lithuanian (Lithuania)",
- "lb": "Luxembourgish (Luxembourg)",
- "mk": "Macedonian (North Macedonia)",
- "ml": "Malayalam (India)",
- "mt": "Maltese (Malta)",
- "mi": "Maori (New Zealand)",
- "mr": "Marathi (India)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepali (Nepal)",
- "oc": "Occitan (France)",
- "or": "Odia (India)",
- "ps": "Pashto (Afghanistan)",
- "fa": "Persian",
- "pl": "Polish (Poland)",
- "pa": "Punjabi (India)",
- "ro": "Romanian (Romania)",
- "rm": "Romansh (Switzerland)",
- "ru": "Russian (Russia)",
- "sa": "Sanskrit (India)",
- "st": "Sesotho sa Leboa (South Africa)",
- "tn": "Setswana (South Africa)",
- "si": "Sinhala (Sri Lanka)",
- "sk": "Slovak (Slovakia)",
- "sl": "Slovenian (Slovenia)",
- "sv": "Swedish (Sweden)",
- "syr": "Syriac (Syria)",
- "tg": "Tajik (Cyrillic, Tajikistan)",
- "ta": "Tamil (India)",
- "tt": "Tatar (Russia)",
- "te": "Telugu (India)",
- "th": "Thai (Thailand)",
- "bo": "Tibetan (PRC)",
- "tr": "Turkish (Turkey)",
- "tk": "Turkmen (Turkmenistan)",
- "uk": "Ukrainian (Ukraine)",
- "ur": "Urdu (Islamic Republic of Pakistan)",
- "vi": "Vietnamese (Vietnam)",
- "cy": "Welsh (United Kingdom)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (PRC)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender for Endpoint",
- "androidDeviceOwnerApplications": "Applications",
- "androidDeviceOwnerPolicyMessages": "Custom support information",
- "androidForWorkPassword": "Device password",
- "appManagement": "Allow or Block apps",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Restricted Apps",
- "applicationVisibility": "Show or Hide Apps",
- "applications": "App Store",
- "applicationsAndGames": "App Store, Doc Viewing, Gaming",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Apps and experience",
- "associatedDomains": "Associated domains",
- "autonomousSingleAppMode": "Autonomous Single App Mode",
- "azureOperationalInsights": "Azure operational insights",
- "bitLocker": "Windows Encryption",
- "bootOptions": "Boot options",
- "browser": "Browser",
- "builtinApps": "Built-in apps",
- "cameras": "Cameras",
- "cellular": "Cellular",
- "cloudAndStorage": "Cloud and Storage",
- "cloudPrint": "Cloud Printer",
- "complianceEmailProfile": "Email",
- "connectedDevices": "Connected devices",
- "connectivity": "Cellular and connectivity",
- "contentCaching": "Content caching",
- "controlPanelAndSettings": "Control Panel and Settings",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Custom Compliance",
- "customConfiguration": "Custom Configuration Profile",
- "customOMASettings": "Custom OMA-URI Settings",
- "customPreferences": "Preference file",
- "dFCISecuritySettings": "Security settings",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows Firewall",
- "defenderLocalSecurityOptions": "Local device security options",
- "defenderSecurityCenter": "Microsoft Defender Security Center",
- "deliveryOptimization": "Delivery Optimization",
- "derivedCredentialAuthenticationConfiguration": "Derived credential",
- "deviceExperience": "Device experience",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Microsoft Defender Application Control",
- "deviceHealth": "Device Health",
- "devicePassword": "Device password",
- "deviceProperties": "Device Properties",
- "deviceRestrictions": "General",
- "deviceSecurity": "System security",
- "display": "Display",
- "domainJoin": "Domain Join",
- "domains": "Domains",
- "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge kiosk mode",
- "editionUpgrade": "Edition Upgrade",
- "education": "Education",
- "educationDeviceCerts": "Device certificates",
- "educationStudentCerts": "Student certificates",
- "educationTakeATest": "Take a Test",
- "educationTeacherCerts": "Teacher certificates",
- "emailProfile": "Email",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Single sign-on app extension",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Games",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Health monitoring",
- "homeScreenLayout": "Home Screen Layout",
- "iOSWallpaper": "Wallpaper",
- "importedPFX": "PKCS Imported Certificate",
- "iosDefenderAtp": "Microsoft Defender for Endpoint",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Kernel extensions",
- "keyboardAndDictionary": "Keyboard and dictionary",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Dedicated devices",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Kiosk web browser",
- "lockScreenMessage": "Lock Screen Message",
- "lockedScreenExperience": "Locked Screen Experience",
- "logging": "Reporting and Telemetry",
- "loginItems": "Login items",
- "loginWindow": "Login window",
- "macDefenderAtp": "Microsoft Defender for Endpoint",
- "maintenance": "Maintenance",
- "malware": "Malware",
- "messaging": "Messaging",
- "microphonesAndSpeakers": "Microphones and speakers",
- "networkBoundary": "Network boundary",
- "networkProxy": "Network proxy",
- "notifications": "App Notifications",
- "pKCS": "PKCS Certificate",
- "password": "Password",
- "personalProfile": "Personal profile",
- "personalization": "Personalization",
- "policyOverride": "Override Group Policy",
- "ports": "Ports",
- "powerSettings": "Power Settings",
- "printer": "Printer",
- "privacy": "Privacy",
- "privacyPerApp": "Per-app privacy exceptions",
- "privacyPreferences": "Privacy preferences",
- "projection": "Projection",
- "radios": "Radios",
- "sCCMCompliance": "Configuration Manager Compliance",
- "sCEP": "SCEP Certificate",
- "sCEPProperties": "SCEP Certificate",
- "sMode": "Mode switch (Windows Insider only)",
- "safari": "Safari",
- "search": "Search",
- "session": "Session",
- "sharedDevice": "Shared iPad",
- "sharedPCAccountManager": "Shared multi-user device",
- "singleSignOn": "Single sign-on",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Settings",
- "start": "Start",
- "systemExtensions": "System extensions",
- "systemSecurity": "System Security",
- "trustedCert": "Trusted Certificate",
- "uEFIAccess": "UEFI access",
- "updates": "Updates",
- "userRights": "User Rights",
- "usersAndAccounts": "Users and Accounts",
- "vPN": "Base VPN",
- "vPNApps": "Automatic VPN",
- "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
- "vPNConditionalAccess": "Conditional Access",
- "vPNConnectivity": "Connectivity",
- "vPNDNSTriggers": "DNS Settings",
- "vPNIKEv2": "IKEv2 settings",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Split Tunneling",
- "vPNTrustedNetwork": "Trusted Network Detection",
- "wakeSettings": "Wake settings",
- "webContentFilter": "Web Content Filter",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender for Endpoint",
- "windowsDefenderATP": "Microsoft Defender for Endpoint",
- "windowsHelloForBusiness": "Windows Hello for Business",
- "windowsSpotlight": "Windows Spotlight",
- "wiredNetwork": "Wired network",
- "wireless": "Wireless",
- "wirelessProjection": "Wireless projection",
- "workProfile": "Work profile settings",
- "workProfilePassword": "Work profile password",
- "xboxServices": "Xbox services",
- "zebraMx": "MX profile (Zebra only)",
- "complianceActionsLabel": "Actions for noncompliance"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Description"
- },
- "FeatureDeploymentSettings": {
- "header": "Feature deployment settings"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "This feature cannot downgrade a device.",
- "label": "Feature update to deploy"
- },
- "GradualRolloutEndDate": {
- "label": "Final group availability"
- },
- "GradualRolloutInterval": {
- "label": "Days between groups"
- },
- "GradualRolloutStartDate": {
- "label": "First group availability"
- },
- "Name": {
- "label": "Name"
- },
- "OptionalUpdate": {
- "label": "Required or optional update"
- },
- "RolloutOptions": {
- "label": "Rollout options"
- },
- "RolloutSettings": {
- "header": "When would you like to make the update available in Windows Update?"
- },
- "ScopeSettings": {
- "header": "Configure scope tags for this policy."
- },
- "StartDateOnlyStartDate": {
- "label": "First available date"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Disabled",
- "enabled": "Enabled",
- "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
- "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
- "notApplicable": "Not Applicable",
- "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
- },
- "bladeTitle": "Feature update deployments",
- "deploymentSettingsTitle": "Deployment settings",
- "loadError": "Loading failed!",
- "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
- },
- "Notifications": {
- "deploymentSaved": "\"{0}\" has been saved.",
- "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
- },
- "TabName": {
- "deploymentSettings": "Deployment settings",
- "groupAssignmentSettings": "Assignments",
- "scopeSettings": "Scope tags"
- },
- "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
- "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
- "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
- "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
- "profileNameWarning": "Name should be less than 64 characters",
- "specificLicensingRequired": "Some selected capabilities require specific licensing."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Allow the use of lowercase letters in PIN",
- "notAllow": "Do not allow the use of lowercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Allow the use of special characters in PIN",
- "notAllow": "Do not allow the use of special characters in PIN",
- "requireAtLeastOne": "Require the use of at least one special character in PIN"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Allow the use of uppercase letters in PIN",
- "notAllow": "Do not allow the use of uppercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
- }
- },
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "App Version",
- "dependencyName": "Dependency name",
- "lastModifiedTime": "Last modified time",
- "relationship": "Relationship",
- "replaced": "Replaced",
- "searchPlaceholder": "Filter by app name",
- "status": "Status details",
- "statusDetails": "Status",
- "supersedenceName": "Supersedence name"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Child dependency",
- "indirectSupersedence": "Not directly related",
- "supersedenceAncestors": "Superseding",
- "supersedenceDescendants": "Superseded"
- },
- "SupersededReplaced": {
- "no": "No",
- "yes": "Yes"
- },
- "Tabs": {
- "chart": "Chart",
- "dependency": "Dependency",
- "label": "View: ",
- "supersedence": "Supersedence",
- "table": "Table"
- },
- "dependencyGraphAriaLabel": "App dependency chart",
- "supersedenceGraphAriaLabel": "App supersedence chart"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Please select a discovery script",
- "scriptFileLabel": "Select your discovery script"
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
+ "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
+ "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
+ "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
+ "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
+ "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
+ "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
+ "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
+ "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
+ "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
+ "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
+ "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
+ "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
+ "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
+ "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
+ "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
+ "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
+ "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
+ "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
+ "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
+ "apps": "apps",
+ "appsListName": "Application list",
+ "blockingApps": "Blocking apps",
+ "managedApps": "Managed apps",
+ "noApps": "No applications",
+ "noAppsError": "Error retrieving applications",
+ "selectApps": "Select apps",
+ "selectedAppsCount": "{0} apps selected (100 max)",
+ "useSelectedAppsAll": "All",
+ "useSelectedAppsSelected": "Selected",
+ "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
},
- "PremiumBanner": {
- "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
- "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Script",
- "placeholder": "Click to select",
- "searchboxPlaceholder": "Search by script name",
- "title": "Select a discovery script"
+ "Header": {
+ "application": "Application",
+ "publisher": "Publisher",
+ "version": "Version"
},
- "SummaryGrid": {
- "ariaLabel": "Custom compliance rules summary"
+ "SearchBox": {
+ "ariaLabel": "Search apps",
+ "placeHolder": "Search by name or publisher"
+ },
+ "allowToUseToggle": "Allow users to use device if installation error occurs",
+ "blockToggle": "Block device use until all apps and profiles are installed",
+ "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
+ "collectLogToggle": "Turn on log collection and diagnostics page for end users",
+ "create": "Create Profile",
+ "customMessageTextBox": "Error message",
+ "customMessageToggle": "Show custom message when time limit or error occurs",
+ "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
+ "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
+ "progressToggle": "Show app and profile configuration progress",
+ "resetToggle": "Allow users to reset device if installation error occurs",
+ "timeout": "Show an error when installation takes longer than specified number of minutes"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Property",
+ "rule": "Rule",
+ "ruleDetails": "Rule Details",
+ "value": "Value"
},
- "UploadFile": {
- "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
- "noFileSelectedError": "Please select a json file",
- "parseFileSelectedError": "The json file is invalid"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filter",
- "noFilters": "None"
- },
- "Platform": {
- "all": "All",
- "android": "Android device administrator",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android enterprise",
- "common": "Common",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS and Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "windows": "Windows",
- "windows10": "Windows 10 and later",
- "windows10CM": "Windows 10 and later (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 and later",
- "windows8And10": "Windows 8 and 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 and later",
- "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows PC"
- },
- "AppInformationTab": {
- "Info": {
- "AppStoreUrl": {
- "android": "Enter the link to the app listing in Google Play store. For example:",
- "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
- "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
- "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
- "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
- "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
- "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ "assignIf": "Assign profile if",
+ "deleteWarning": "This will delete the selected Applicability Rule",
+ "dontAssignIf": "Don't assign profile if",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "and {0} more",
+ "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
+ "maxText": "Max",
+ "minText": "Min",
+ "noActionRow": "No Applicability Rules Specified",
+ "oSVersion": "e.g. 1.2.3.4",
+ "toText": "to",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "OS edition",
+ "windows10OsVersion": "OS version",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Allow user to change setting",
+ "tooltip": "Specify if the user is allowed to change the setting."
+ },
+ "AllowWorkAccounts": {
+ "title": "Allow only work or school accounts",
+ "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
},
- "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
- "applicableDeviceType": "Select the device types that can install this app.",
- "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
- "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
- "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
- "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
- "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
- "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
- "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
- "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
- "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
- "learnMore": "Learn more",
- "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
- "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
- "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
- "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
- "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
- "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
- "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
- "packageId": "The app Package Identifier is the unique value that identifies the app.",
- "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
- "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
- "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
- "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
- "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
- "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
- "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
- "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
- "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
- "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
- },
- "descriptionPreview": "Preview",
- "descriptionRequired": "Description is required.",
- "editDescription": "Edit Description",
- "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
- "name": "App information",
- "nameForOfficeSuitApp": "App suite information"
- },
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ "BlockExternalImages": {
+ "title": "Block external images",
+ "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
+ },
+ "ConfigureEmail": {
+ "title": "Configure email account settings"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
+ "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
+ },
+ "title": "Default app signature"
+ },
+ "OfficeFeedReplies": {
+ "title": "Discover Feed",
+ "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
+ },
+ "OrganizeMailByThread": {
+ "title": "Organize mail by thread",
+ "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
+ },
+ "PlayMyEmails": {
+ "title": "Play My Emails",
+ "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
+ },
+ "SuggestedReplies": {
+ "title": "Suggested replies",
+ "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
+ },
+ "SyncCalendars": {
+ "title": "Sync Calendars",
+ "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
+ },
+ "TextPredictions": {
+ "title": "Text Predictions",
+ "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
},
- "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
- "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
- "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
- "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
- "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
- "appSharingToLevel3": "{0}: Allow sending org data to any app",
- "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
- "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
- "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
- "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
- "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
- "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
- "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
- "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
- "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
- "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
- "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
- "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
- "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
- "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
- "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
- "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
- "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
- "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
- "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
- "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
- "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
- "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
- "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
- "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
- "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
- "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
- "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
- "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
- "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ "ThemesEnabled": {
+ "title": "Themes enabled",
+ "tooltip": "Specify if the user is allowed to use a custom visual theme."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS devices"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Admin contacts",
+ "appPackaging": "App packaging",
+ "autopatchGroups": "Autopatch groups",
+ "devices": "Devices",
+ "featureEnablement": "Feature activate",
+ "feedback": "Feedback",
+ "gettingStarted": "Getting started",
+ "messages": "Messages",
+ "onlineResources": "Online resources",
+ "policyHealth": "Policy health",
+ "policyHealthPreview": "Policy health (preview)",
+ "releaseManagement": "Release management",
+ "serviceRequests": "Service requests",
+ "settings": "Settings",
+ "supportRequests": "Support requests",
+ "tenantEnrollment": "Tenant enrollment",
+ "tenantManagement": "Tenant management"
+ },
+ "actions": "Actions for Non-Compliance",
+ "advancedExchangeSettings": "Exchange online settings",
+ "advancedThreatProtection": "Microsoft Defender for Endpoint",
+ "allApps": "All apps",
+ "allDevices": "All devices",
+ "androidFotaDeployments": "Android FOTA deployments",
+ "appBundles": "App Bundles",
+ "appCategories": "App categories",
+ "appConfigPolicies": "App configuration policies",
+ "appConfigurationStatus": "App Configuration Status",
+ "appInstallStatus": "App install status",
+ "appLicences": "App licenses",
+ "appProtectionPolicies": "App protection policies",
+ "appProtectionStatus": "App Protection status",
+ "appSelectiveWipe": "App selective wipe",
+ "appleVppTokens": "Apple VPP Tokens",
+ "apps": "Apps",
+ "assign": "Assignments",
+ "assignedPermissions": "Assigned permissions",
+ "assignedRoles": "Assigned roles",
+ "autopilotDeploymentReport": "Autopilot deployments (preview)",
+ "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
+ "brandingAndCustomization": "Customization",
+ "cartProfiles": "Cart profiles",
+ "certificateConnectors": "Certificate connectors",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Cloud attached devices (preview)",
+ "cloudPcActions": "Cloud PC actions (preview)",
+ "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
+ "compliancePolicies": "Compliance policies",
+ "complianceScriptManagement": "Scripts",
+ "complianceScriptManagementPreview": "Scripts (preview)",
+ "complianceSettings": "Compliance policy settings",
+ "conditionStatements": "Condition statements",
+ "conditions": "Locations",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Configuration profiles",
+ "configurationScripts": "Configuration Scripts",
+ "connectorsAndTokens": "Connectors and tokens",
+ "corporateDeviceIdentifiers": "Corporate device identifiers",
+ "customAttributes": "Custom attributes",
+ "customAttributesMacOS": "Custom attributes for macOS",
+ "customNotifications": "Custom notifications",
+ "deploymentSettings": "Deployment settings",
+ "derivedCredentials": "Derived Credentials",
+ "deviceActions": "Device actions",
+ "deviceCategories": "Device categories",
+ "deviceCleanUp": "Device clean-up rules",
+ "deviceEnrollmentManagers": "Device enrollment managers",
+ "deviceExecutionStatus": "Device status",
+ "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
+ "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
+ "devices": "Devices",
+ "discoveredApps": "Discovered apps",
+ "edgePolicies": "Policies for Microsoft Edge",
+ "embeddedSIM": "eSIM cellular profiles (preview)",
+ "enrollDevices": "Enroll devices",
+ "enrollmentFailures": "Enrollment failures",
+ "enrollmentNotifications": "Enrollment notifications (preview)",
+ "enrollmentRestrictions": "Enrollment restrictions",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange service connectors",
+ "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
+ "failuresForDriverUpdates": "Windows Driver update failures",
+ "failuresForFeatureUpdates": "Feature update failures",
+ "failuresForQualityUpdates": "Windows Expedited update failures",
+ "featureFlighting": "Feature flighting",
+ "featureUpdateDeployments": "Feature updates for Windows 10 and later",
+ "flighting": "Flighting",
+ "fotaUpdate": "Firmware over-the-air update",
+ "groupPolicy": "Administrative Templates",
+ "groupPolicyAnalytics": "Group policy analytics",
+ "helpSupport": "Help and support",
+ "helpSupportReplacement": "Help and support ({0})",
+ "iOSAppProvisioning": "iOS app provisioning profiles",
+ "incompleteUserEnrollments": "Incomplete user enrollments",
+ "iosUpdates": "iOS/iPadOS updates",
+ "legacyPcManagement": "Legacy PC management",
+ "macOSSoftwareUpdate": "macOS updates",
+ "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
+ "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
+ "macOSSoftwareUpdateStateSummaries": "updates",
+ "managedGooglePlay": "Managed Google Play",
+ "msfb": "Microsoft Store for Business",
+ "myPermissions": "My permissions",
+ "notifications": "Notifications",
+ "officeApps": "Office apps",
+ "officeProPlusPolicies": "Policies for Office apps",
+ "onPremise": "On Premise",
+ "onPremisesConnector": "Exchange ActiveSync on-premises connector",
+ "onPremisesDeviceAccess": "Exchange ActiveSync devices",
+ "onPremisesManageAccess": "Exchange on-premises access",
+ "outOfDateIosDevices": "Installation failures for iOS devices",
+ "overview": "Overview",
+ "partnerDeviceManagement": "Partner device management",
+ "perUpdateRingDeploymentState": "Per update ring deployment state",
+ "permissions": "Permissions",
+ "platformApps": "{0} apps",
+ "platformDevices": "{0} devices",
+ "platformEnrollment": "{0} enrollment",
+ "policies": "Policies",
+ "profiles": "Profiles",
+ "properties": "Properties",
+ "reports": "Reports",
+ "retireNoncompliantDevices": "Retire noncompliant devices",
+ "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
+ "role": "Role",
+ "scriptManagement": "Scripts",
+ "securityBaselines": "Security baselines",
+ "serviceToServiceConnector": "Exchange online connector",
+ "servicenowConnector": "ServiceNow connector",
+ "shellScripts": "Shell scripts",
+ "teamViewerConnector": "TeamViewer connector",
+ "telecomeExpenseManagement": "Telecom expense management",
+ "tenantAdmin": "Tenant admin",
+ "tenantAdministration": "Tenant administration",
+ "termsAndConditions": "Terms and conditions",
+ "titles": "Titles",
+ "troubleshoot": "Troubleshoot",
+ "troubleshootSupport": "Troubleshooting + support",
+ "user": "User",
+ "userExecutionStatus": "User status",
+ "wdacSupplementalPolicies": "S mode supplemental policies",
+ "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
+ "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
+ "win32CatalogUpdateAppPreviewTitle": "Enterprise App Catalog apps with updates (preview)",
+ "win32CatalogUpdateAppTitle": "Enterprise App Catalog apps with updates",
+ "windows10DriverUpdate": "Driver updates for Windows 10 and later",
+ "windows10QualityUpdate": "Quality updates for Windows 10 and later",
+ "windows10UpdateRings": "Update rings for Windows 10 and later",
+ "windows10XPolicyFailures": "Windows 10X policy failures",
+ "windows365PartnerConnector": "Windows 365 partner connectors",
+ "windowsDiagnosticData": "Windows data",
+ "windowsEnterpriseCertificate": "Windows enterprise certificate",
+ "windowsManagement": "Scripts",
+ "windowsSideLoadingKeys": "Windows side loading keys",
+ "windowsSymantecCertificate": "Windows DigiCert certificate",
+ "windowsThreatReport": "Threat agent status"
+ },
+ "TAPSettings": {
+ "AllowedDataIngestionLocations": {
+ "label": "Allow users to open data from selected services",
+ "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
+ },
+ "AndroidBackup": {
+ "label": "Backup org data to Android backup services",
+ "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ },
+ "AndroidBiometricAuthentication": {
+ "label": "Biometrics instead of PIN for access",
+ "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
+ },
+ "AndroidFingerprint": {
+ "label": "Fingerprint instead of PIN for access (Android 6.0+)",
+ "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
+ },
+ "AndroidOverrideFingerprint": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "AppPIN": {
+ "label": "App PIN when device PIN is set",
+ "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
+ },
+ "BlockDataIngestionIntoOrganizationDocuments": {
+ "label": "Open data into Org documents",
+ "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
+ "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
+ "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
+ "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
+ },
+ "ConnectToVpnOnLaunch": {
+ "label": "Start Microsoft Tunnel connection on app-launch",
+ "tooltip": "Allow connection to VPN when app is launch"
+ },
+ "CredentialsForAccess": {
+ "label": "Work or school account credentials for access",
+ "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
+ },
+ "CustomBrowserDisplayName": {
+ "label": "Unmanaged Browser Name",
+ "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
+ },
+ "CustomBrowserPackageId": {
+ "label": "Unmanaged Browser ID",
+ "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
+ },
+ "CustomBrowserProtocol": {
+ "label": "Unmanaged browser protocol",
+ "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
+ },
+ "DialerRestrictionLevel": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
+ "label": "Transfer telecommunication data to",
+ "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "EncryptData": {
+ "label": "Encrypt org data",
+ "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
},
- "Tap": {
- "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
- "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
- "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
- "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
- "checkInput": "Check input for validity",
- "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
- "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
- "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
- "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
- "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
- "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
- "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
- "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
- "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
- "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
- "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
- "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
- "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
- "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
- "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
- "name": "The name of this network boundary",
- "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
- "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
- "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
- "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
- "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
- "protectUnderLock": "Protects app content while the device is in a locked state.",
- "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
- "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
- "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
- "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
- "required": "Required",
- "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
- "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
- "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
- "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
- "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ "EncryptDataAndroid": {
+ "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
+ },
+ "EncryptDataIos": {
+ "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 256-bit AES encryption to app data.",
+ "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
+ "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
},
- "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
- },
+ "EncryptDataOnEnrolledDevices": {
+ "label": "Encrypt org data on enrolled devices",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
+ },
+ "IOSBackup": {
+ "label": "Backup org data to iTunes and iCloud backups",
+ "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
+ },
+ "IOSFaceID": {
+ "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
+ "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
+ },
+ "IOSOverrideTouchId": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "IOSTouchId": {
+ "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
+ "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
+ },
+ "MessagingRedirectAppDisplayName": {
+ "label": "Messaging App Name"
+ },
+ "MessagingRedirectAppPackageId": {
+ "label": "Messaging App Package ID"
+ },
+ "MessagingRedirectAppUrlScheme": {
+ "label": "Messaging App URL Scheme"
+ },
+ "NotificationRestriction": {
+ "label": "Org data notifications",
+ "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
+ },
+ "OpenLinksManagedBrowser": {
+ "label": "Restrict web content transfer with other apps",
+ "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
+ },
+ "OverrideBiometric": {
+ "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
+ },
+ "PinAccess": {
+ "label": "PIN for access",
+ "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
+ },
+ "PinLength": {
+ "label": "Select minimum PIN length",
+ "tooltip": "This setting specifies the minimum number of digits of a PIN."
+ },
+ "PinType": {
+ "label": "PIN type",
+ "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
+ },
+ "Printing": {
+ "label": "Printing org data",
+ "tooltip": "If blocked, the app cannot print protected data."
+ },
+ "ProtectedMessagingRedirectAppType": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
+ "label": "Transfer messaging data to",
+ "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "ReceiveData": {
+ "label": "Receive data from other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ },
+ "RecheckAccessAfter": {
+ "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
+ "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
+ },
+ "RequireClass3Biometrics": {
+ "label": "Class 3 Biometrics (Android 9.0+)",
+ "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
+ },
+ "RequirePinAfterBiometricChange": {
+ "label": "Override Biometrics with PIN after biometric updates",
+ "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
+ },
+ "RestrictKeyboards": {
+ "duplicatePackageError": "The package ID must be unique.",
+ "invalidPackageError": "Invalid package ID",
+ "label": "Approved keyboards",
+ "select": "Select keyboards to approve",
+ "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
+ "title": "Add approved keyboards",
+ "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
+ },
+ "SaveData": {
+ "label": "Save copies of org data",
+ "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
+ },
+ "SaveDataToSelected": {
+ "label": "Allow user to save copies to selected services",
+ "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
+ },
+ "ScreenCaptureAndAndroidAssistant": {
+ "label": "Screen capture and Google Assistant\n",
+ "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
+ },
+ "SendData": {
+ "label": "Send org data to other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
+ },
+ "SimplePin": {
+ "label": "Simple PIN",
+ "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
+ },
+ "SyncContacts": {
+ "label": "Sync policy managed app data with native apps or add-ins"
+ },
+ "ThirdPartyKeyboards": {
+ "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
+ "label": "Third party keyboards"
+ },
+ "Timeout": {
+ "label": "Timeout (minutes of inactivity)"
+ },
+ "WinCutCopyPaste": {
+ "label": "Allow cut, copy, and paste for",
+ "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
+ },
+ "WinPrintData": {
+ "label": "Print org data",
+ "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
+ },
+ "WinReceiveData": {
+ "label": "Receive data from",
+ "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
+ },
+ "WinSendData": {
+ "label": "Send org data to",
+ "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
+ },
+ "Tap": {
+ "numberOfDays": "Number of days",
+ "pinResetAfterNumberOfDays": "PIN reset after number of days",
+ "previousPinBlockCount": "Select number of previous PIN values to maintain"
+ }
+ },
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Make available to users as an optional update",
+ "optionalValue": "Optional",
+ "required": "Make available to users as a required update",
+ "requiredValue": "Required"
+ },
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "webApp": "Web link",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "PolicySet": {
+ "appManagement": "Application management",
+ "assignments": "Assignments",
+ "basics": "Basics",
+ "deviceEnrollment": "Device enrollment",
+ "deviceManagement": "Device management",
+ "scopeTags": "Scope tags",
+ "appConfigurationTitle": "App configuration policies",
+ "appProtectionTitle": "App protection policies",
+ "appTitle": "Apps",
+ "iOSAppProvisioningTitle": "iOS app provisioning profiles",
+ "deviceLimitRestrictionTitle": "Device limit restrictions",
+ "deviceTypeRestrictionTitle": "Device type restrictions",
+ "enrollmentStatusSettingTitle": "Enrollment status pages",
+ "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
+ "deviceComplianceTitle": "Device compliance policies",
+ "deviceConfigurationTitle": "Device configuration profiles",
+ "powershellScriptTitle": "Powershell scripts"
+ },
"Win32Program": {
"DeviceRestartBehaviorOptions": {
"allow": "App install may force a device restart",
@@ -819,6 +2435,233 @@
"uninstallCommand": "Uninstall command",
"uninstallCommandTooltip": "The complete uninstallation command line used to uninstall this app."
},
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
+ },
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Allow the use of lowercase letters in PIN",
+ "notAllow": "Do not allow the use of lowercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Allow the use of special characters in PIN",
+ "notAllow": "Do not allow the use of special characters in PIN",
+ "requireAtLeastOne": "Require the use of at least one special character in PIN"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Allow the use of uppercase letters in PIN",
+ "notAllow": "Do not allow the use of uppercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
+ }
+ },
"Autopilot": {
"AssignResourceAccount": {
"createNewCommandMenu": "Create new",
@@ -1031,268 +2874,1051 @@
"windowsPCCommandMenu": "Windows PC",
"directoryServiceLabel": "Join to Microsoft Entra ID as"
},
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Admin Groups",
- "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
- "rolesMenuTitle": "Endpoint Manager roles",
- "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
- "RoleAssignmentScope": "Scope Groups"
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Managed devices",
+ "devicesWithoutEnrollment": "Managed apps"
},
- "MinimumOperatingSystem": {
- "Android": {
- "v10": "Android 10.0",
- "v11": "Android 11.0",
- "v4": "Android 4.0 (Ice Cream Sandwich)",
- "v403": "Android 4.0.3 (Ice Cream Sandwich)",
- "v41": "Android 4.1 (Jelly Bean)",
- "v42": "Android 4.2 (Jelly Bean)",
- "v43": "Android 4.3 (Jelly Bean)",
- "v44": "Android 4.4 (KitKat)",
- "v5": "Android 5.0 (Lollipop)",
- "v51": "Android 5.1 (Lollipop)",
- "v6": "Android 6.0 (Marshmallow)",
- "v7": "Android 7.0 (Nougat)",
- "v71": "Android 7.1 (Nougat)",
- "v8": "Android 8.0 (Oreo)",
- "v81": "Android 8.1 (Oreo)",
- "v9": "Android 9.0 (Pie)"
- },
- "IOS": {
- "v10": "iOS 10.0",
- "v11": "iOS 11.0",
- "v12": "iOS 12.0",
- "v13": "iOS 13.0",
- "v14": "iOS 14.0",
- "v15": "iOS 15.0",
- "v16": "iOS 16.0",
- "v17": "iOS 17.0",
- "v8": "iOS 8.0",
- "v9": "iOS 9.0"
- },
- "MacOS": {
- "V10": {
- "10": "OS X Yosemite 10.10",
- "11": "OS X El Capitan 10.11",
- "12": "macOS Sierra 10.12",
- "13": "macOS High Sierra 10.13",
- "14": "macOS Mojave 10.14",
- "15": "macOS Catalina 10.15",
- "7": "Mac OS X Lion 10.7",
- "8": "OS X Mountain Lion 10.8",
- "9": "OS X Mavericks 10.9"
- },
- "V11": {
- "0": "macOS Big Sur 11.0"
- },
- "V12": {
- "0": "macOS Monterey 12.0"
- },
- "V13": {
- "0": "macOS Ventura 13.0"
- },
- "V14": {
- "0": "macOS Sonoma 14.0"
- }
- },
- "Windows": {
- "V10Release": {
- "release1607": "Windows 10 1607",
- "release1703": "Windows 10 1703",
- "release1709": "Windows 10 1709",
- "release1803": "Windows 10 1803",
- "release1809": "Windows 10 1809",
- "release1903": "Windows 10 1903",
- "release1909": "Windows 10 1909",
- "release2004": "Windows 10 2004",
- "release21H1": "Windows 10 21H1",
- "release21H2": "Windows 10 21H2",
- "release22H2": "Windows 10 22H2",
- "release2H20": "Windows 10 20H2"
- },
- "V11Release": {
- "release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
- },
- "v10": "Windows 10.0",
- "v80": "Windows 8.0",
- "v81": "Windows 8.1"
- },
- "WindowsPhone": {
- "v80": "Windows Phone 8.0",
- "v81": "Windows Phone 8.1"
- }
- },
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
- "apps": "apps",
- "appsListName": "Application list",
- "blockingApps": "Blocking apps",
- "managedApps": "Managed apps",
- "noApps": "No applications",
- "noAppsError": "Error retrieving applications",
- "selectApps": "Select apps",
- "selectedAppsCount": "{0} apps selected (100 max)",
- "useSelectedAppsAll": "All",
- "useSelectedAppsSelected": "Selected",
- "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
- },
- "Header": {
- "application": "Application",
- "publisher": "Publisher",
- "version": "Version"
+ "AppProtection": {
+ "allAppTypes": "Target to all app types",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Apps in Android Work Profile",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
+ "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
+ "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
+ "appsOnUnmanagedDevices": "Apps on unmanaged devices",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Not Available",
+ "windows10PlatformLabel": "Windows 10 and later",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Project Online Desktop Client",
+ "visioProRetail": "Visio Online Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Failed to delete {0}",
+ "failureCa": "Failed to delete {0} because it is referenced by CA policies",
+ "modifying": "Deleting {0}",
+ "success": "Successfully deleted {0}"
+ },
+ "Notify": {
+ "failure": "Failed to update {0}",
+ "modifying": "Modifying {0}",
+ "success": "Successfully updated {0}"
+ },
+ "menuLabel": "Authentication context"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
+ "certificate": "Certificate authentication",
+ "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
+ "multifactor": "Multifactor authentication",
+ "require": "Require federated authentication method (Preview)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
+ },
+ "Option": {
+ "always": "Always persistent",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "label": "Persistent browser session",
+ "never": "Never persistent"
+ },
+ "Warning": {
+ "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Hours or days",
+ "value": "Frequency"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} days",
+ "singular": "1 day"
+ },
+ "Hour": {
+ "plural": "{0} hours",
+ "singular": "1 hour"
+ },
+ "daysOption": "Days",
+ "everytime": "Every time",
+ "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
+ "hoursOption": "Hours",
+ "label": "Sign-in frequency",
+ "placeholder": "Select units"
+ }
+ },
+ "mainOption": "Modify session lifetime",
+ "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
+ },
+ "SingleSelectorActive": {
+ "failed": "Unable to load this data.",
+ "reattempt": "Loading data. Reattempt {0} of {1}."
},
- "SearchBox": {
- "ariaLabel": "Search apps",
- "placeHolder": "Search by name or publisher"
- },
- "allowToUseToggle": "Allow users to use device if installation error occurs",
- "blockToggle": "Block device use until all apps and profiles are installed",
- "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
- "collectLogToggle": "Turn on log collection and diagnostics page for end users",
- "create": "Create Profile",
- "customMessageTextBox": "Error message",
- "customMessageToggle": "Show custom message when time limit or error occurs",
- "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
- "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
- "progressToggle": "Show app and profile configuration progress",
- "resetToggle": "Allow users to reset device if installation error occurs",
- "timeout": "Show an error when installation takes longer than specified number of minutes"
- },
- "TableHeaders": {
- "activity": "Activity",
- "activityName": "Activity name",
- "actor": "Initiated by (actor)",
- "actorType": "Actor type",
- "app": "App",
- "appName": "App name",
- "applicationName": "Application name",
- "approvalType": "Approval method",
- "assignedGroups": "Group",
- "assignment": "Assignment",
- "assignmentStatus": "Assigned",
- "assignments": "Assignments",
- "attributeName": "Attribute name",
- "attributeType": "Attribute type",
- "bundleId": "Bundle-Id",
- "category": "Category",
- "complianceGracePeriodExpiration": "Compliance grace period expiration",
- "configurationType": "Profile type",
- "conflictingPolicy": "Conflicting Policies",
- "createdDate": "Created date",
- "currentOs": "Current OS",
- "date": "Date",
- "dateRange": "Date range",
- "deployed": "Deployed",
- "description": "Description",
- "device": "Device",
- "deviceId": "Device ID",
- "deviceName": "Device name",
- "deviceOrApplicationName": "Device or application name",
- "deviceReporting": "Devices reporting",
- "diagnosticCode": "Diagnostic Code",
- "diagnosticText": "Diagnostic Text",
- "diagnostics": "Diagnostics",
- "displayName": "Display name",
- "driversToReview": "Drivers to review",
- "eSIMActivationStatus": "Activation status",
- "eSIMCellularStatus": "Cellular status",
- "eSIMICCID": "ICCID",
- "eSIMPoolName": "Cellular subscription",
- "eSIMState": "eSIM state",
- "eSIMTokenAmount": "Total eSIM activation codes",
- "enabled": "Enabled",
- "enabledPlatforms": "Enabled Platforms",
- "encryptionReadiness": "Encryption Readiness",
- "encryptionStatus": "Encryption Status",
- "endTime": "End time",
- "enrollment": "Enrollment",
- "enrollmentAttempt": "Enrollment start",
- "eventDateTime": "Timestamp",
- "eventIdentifier": "Event ID",
- "eventLevel": "Level",
- "excluded": "Excluded",
- "failure": "Failure",
- "featureUpdateDeferral": "Feature Deferral",
- "featureUpdateVersion": "Feature Update Version",
- "featureUpdatesPaused": "Feature (Paused)",
- "featureUpdatesStatus": "Feature",
- "from": "From",
- "groups": "Groups",
- "groupsSelected": "Groups Selected",
- "installationStatus": "Installation Status",
- "issueId": "Issue id",
- "lastCheckinTime": "Last Check-in Time",
- "lastModified": "Last modified",
- "lastScanTime": "Last Scan Time",
- "lastSuccessfulSync": "Last Successful Sync",
- "lastUpdated": "Last Updated",
- "location": "Location",
- "loggedInUser": "Logged in user",
- "message": "Message",
- "model": "Model",
- "mtdConnector": "MTD Connector",
- "name": "Profile name",
- "oSVersion": "OS Version",
- "operationType": "Operation type",
- "os": "OS",
- "packageName": "Package name",
- "partnerName": "Partner",
- "partnerStatus": "Partner status",
- "permission": "Permission",
- "platform": "Platform",
- "policies": "Policies",
- "policy": "Policy",
- "policyType": "Policy type",
- "preventedUpdateDays": "Restricted days",
- "priority": "Priority",
- "profiles": "Profiles",
- "publicAddress": "Public address",
- "publisher": "Publisher",
- "qualityUpdateDeferral": "Quality Deferral",
- "qualityUpdateRelease": "Quality Update Release",
- "qualityUpdateVersion": "Quality Update Version",
- "qualityUpdatesPaused": "Quality (Paused)",
- "qualityUpdatesStatus": "Quality",
- "reason": "Reason",
- "resource": "Resource",
- "roleName": "Name",
- "roles": "Roles",
- "scopeGroups": "Scope groups",
- "scopeSize": "Assigned Scope Groups",
- "scopeTags": "Scope tags",
- "scriptName": "Script name",
- "scriptType": "Script type",
- "servicingOption": "Servicing channel",
- "setting": "Setting",
- "settings": "Settings",
- "siteName": "Site name",
- "source": "Source",
- "sourceProfile": "Source Profile",
- "startTime": "Start time",
- "state": "State",
- "stateDetails": "State details",
- "status": "Status",
- "subject": "Subject",
- "support": "Support",
- "supportEndDate": "Support End Date",
- "tPMVersion": "TPM Version",
- "target": "Target",
- "timeWindows": "Time windows",
- "timeZone": "Time zone",
- "type": "Type",
- "updateScheduleType": "Schedule type",
- "updateStatus": "Update Status",
- "user": "User",
- "userPrincipalName": "User principal name",
- "users": "Users",
- "usersExcluded": "Users excluded",
- "usersTargeted": "Users targeted",
- "value": "Value",
- "includedGroups": "Included Groups",
- "excludedGroups": "Excluded Groups",
- "licenseType": "License type"
- },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Choose directory roles"
+ },
+ "Excluded": {
+ "gridAria": "List of excluded users"
+ },
+ "Included": {
+ "gridAria": "List of included users"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
+ "customRoleSelected": "At least one custom role is selected",
+ "failed": "\"{0}\" must be configured",
+ "roles": "Select at least one role",
+ "usersGroups": "Select at least one user or group"
+ },
+ "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
+ },
+ "advancedTabText": "Advanced",
+ "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
+ "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
+ "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
+ "allDayCheckboxLabel": "All day",
+ "allDevicePlatforms": "Any device",
+ "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
+ "allGuestUserLabel": "All guest and external users",
+ "allRiskLevelsOption": "All risk levels",
+ "allTrustedLocationLabel": "All trusted locations",
+ "allUserGroupSetSelectorLabel": "All users and groups selected",
+ "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
+ "allUsersString": "All users",
+ "and": "{0} AND {1} ",
+ "andWithGrouping": "({0}) AND {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Any cloud app",
+ "appContextOptionInfoContent": "Requested authentication tag",
+ "appContextOptionLabel": "Requested authentication tag (Preview)",
+ "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
+ "appNotSetSeletorLabel": "0 cloud apps selected",
+ "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
+ "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
+ "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
+ "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
+ "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
+ "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
+ "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
+ "applyConditonLabel": "Configure",
+ "ariaLabelPolicyDisabled": "Policy is disabled",
+ "ariaLabelPolicyEnabled": "Policy is enabled",
+ "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
+ "blockAccess": "Block access",
+ "builtInDirectoryRoleLabel": "Built-in directory roles",
+ "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "casInfoBubble": "This control works for various cloud apps.",
+ "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "cert64DownloadCol": "Download base64 certificate",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Download certificate",
+ "certDurationCol": "Expiry",
+ "certDurationStartCol": "Valid from",
+ "certName": "VpnCert",
+ "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Choose Applications",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Chosen Applications",
+ "chooseApplicationsEmpty": "No Applications",
+ "chooseApplicationsNone": "None",
+ "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseApplicationsPlural": "{0} and {1} more",
+ "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
+ "chooseApplicationsRemove": "Remove",
+ "chooseApplicationsReturnedPlural": "{0} applications found",
+ "chooseApplicationsReturnedSingular": "1 application found",
+ "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
+ "chooseApplicationsSearchHint": "Search Applications...",
+ "chooseApplicationsSearchLabel": "Applications",
+ "chooseApplicationsSearching": "Searching...",
+ "chooseApplicationsSelect": "Select",
+ "chooseApplicationsSelected": "Selected",
+ "chooseApplicationsSingular": "{0} and 1 more",
+ "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "chooseLocationCorpnetItem": "Corporate network",
+ "chooseLocationSelectedLocationsLabel": "Selected locations",
+ "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Choose Locations",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Chosen Locations",
+ "chooseLocationsEmpty": "No Locations",
+ "chooseLocationsExcludedSelectorTitle": "Select",
+ "chooseLocationsIncludedSelectorTitle": "Select",
+ "chooseLocationsNone": "None",
+ "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseLocationsPlural": "{0} and {1} more",
+ "chooseLocationsRemove": "Remove",
+ "chooseLocationsReturnedPlural": "{0} locations found",
+ "chooseLocationsReturnedSingular": "1 location found",
+ "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
+ "chooseLocationsSearchHint": "Search Locations...",
+ "chooseLocationsSearchLabel": "Locations",
+ "chooseLocationsSearching": "Searching...",
+ "chooseLocationsSelect": "Select",
+ "chooseLocationsSelected": "Selected",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
+ "chooseLocationsSingular": "{0} and 1 more",
+ "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "claimProviderAddCommandText": "New custom control",
+ "claimProviderAddNewBladeTitle": "New custom control",
+ "claimProviderDeleteCommand": "Delete",
+ "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "claimProviderDeleteTitle": "Are you sure?",
+ "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
+ "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
+ "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
+ "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
+ "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
+ "claimProviderNotificationCreateTitle": "Creating '{0}'",
+ "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
+ "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
+ "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
+ "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
+ "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
+ "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
+ "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
+ "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "claimProviderNotificationUpdateTitle": "Updating '{0}'",
+ "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
+ "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
+ "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
+ "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
+ "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
+ "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
+ "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
+ "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
+ "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
+ "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
+ "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
+ "claimProvidersNone": "No custom controls",
+ "claimProvidersSearchPlaceholder": "Search controls.",
+ "classicPoilcyFilterTitle": "Show",
+ "classicPolicyAllPlatforms": "All Platforms",
+ "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
+ "classicPolicyCloudAppTitle": "Cloud application",
+ "classicPolicyControlAllow": "Allow",
+ "classicPolicyControlBlock": "Block",
+ "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
+ "classicPolicyControlRequireCompliantDevice": "Require compliant device",
+ "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
+ "classicPolicyControlRequireMfa": "Require multifactor authentication",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
+ "classicPolicyDeleteCommand": "Delete",
+ "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
+ "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
+ "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
+ "classicPolicyDetailBladeTitle": "Details",
+ "classicPolicyDisableCommand": "Disable",
+ "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
+ "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
+ "classicPolicyDisableFailTitle": "Failed to disable classic policy",
+ "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
+ "classicPolicyDisableInProgressTitle": "Disabling classic policy",
+ "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
+ "classicPolicyDisableSuccessTitle": "Classic policy disabled",
+ "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
+ "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
+ "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
+ "classicPolicyFilterAll": "All policies",
+ "classicPolicyFilterDisabled": "Disabled policies",
+ "classicPolicyFilterEnabled": "Enabled policies",
+ "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
+ "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
+ "classicPolicyIncludedPlatformsTitle": "Included device platforms",
+ "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
+ "classicPolicyMigrateCommand": "Migrate",
+ "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
+ "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
+ "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
+ "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
+ "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
+ "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
+ "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
+ "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
+ "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
+ "classicPolicySaveFailDescription": "Failed to save '{0}'",
+ "classicPolicySaveFailTitle": "Failed to save classic policy",
+ "classicPolicySaveInProgressDescription": "Saving '{0}'",
+ "classicPolicySaveInProgressTitle": "Saving classic policy",
+ "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
+ "classicPolicySaveSuccessTitle": "Classic policy saved",
+ "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
+ "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
+ "clientAppBladeTitle": "Client apps",
+ "clientAppDescription": "Select the client apps this policy will apply to",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
+ "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
+ "clientAppLegacyHeader": "Legacy authentication clients",
+ "clientAppMobileDesktop": "Mobile apps and desktop clients",
+ "clientAppModernHeader": "Modern authentication clients",
+ "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
+ "clientAppSelectSpecificClientApps": "Select client apps",
+ "clientAppWebBrowser": "Browser",
+ "clientAppsSelectedLabel": "{0} included",
+ "clientTypeBrowser": "Browser",
+ "clientTypeEas": "Exchange ActiveSync clients",
+ "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
+ "clientTypeModernAuth": "Modern authentication clients",
+ "clientTypeOtherClients": "Other clients",
+ "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
+ "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
+ "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
+ "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
+ "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
+ "cloudappsSelectorPluralExcluded": "{0} apps excluded",
+ "cloudappsSelectorPluralIncluded": "{0} apps included",
+ "cloudappsSelectorSingularExcluded": "1 app excluded",
+ "cloudappsSelectorSingularIncluded": "1 app included",
+ "cloudappsSelectorUserPlural": "{0} apps",
+ "cloudappsSelectorUserSingular": "1 app",
+ "conditionLabelMulti": "{0} conditions selected",
+ "conditionLabelOne": "1 condition selected",
+ "conditionalAccessBladeTitle": "Conditional Access",
+ "conditionsNotSelectedLabel": "Not configured",
+ "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
+ "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
+ "configureCasText": "Configure Cloud App Security",
+ "configureCustomControlsText": "Configure custom policy",
+ "controlLabelMulti": "{0} controls selected",
+ "controlLabelOne": "1 control selected",
+ "controlValidatorText": "Please select at least one control",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
+ "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
+ "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
+ "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
+ "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
+ "controlsMamInfoBubble": "Device must use these approved client applications.",
+ "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
+ "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
+ "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
+ "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
+ "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
+ "createNewVpnCert": "New certificate",
+ "createdTimeLabel": "Creation time",
+ "customRoleLabel": "Custom roles (not supported)",
+ "dateRangeTypeLabel": "Date range",
+ "daysOfWeekPlaceholderText": "Filter days of the week",
+ "daysOfWeekTypeLabel": "Days of the week",
+ "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
+ "descriptionContentForControlsAndOr": "For multiple controls",
+ "devicePlatform": "Device platform",
+ "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} included",
+ "devicePlatformIncludeExclude": "{0} and {1} excluded",
+ "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
+ "devicePlatformsNone": "None",
+ "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
+ "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
+ "deviceStateAll": "All device state",
+ "deviceStateCompliant": "Device marked as compliant",
+ "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
+ "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
+ "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
+ "deviceStateConditionSelectorLabel": "Device state (deprecated)",
+ "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
+ "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
+ "deviceStateDomainJoinedInfoLinkText": "Learn more.",
+ "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
+ "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
+ "directoryRolesLabel": "Directory roles",
+ "discardbutton": "Discard",
+ "downloadDefaultFileName": "IP Ranges",
+ "downloadExampleFileName": "Example",
+ "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
+ "duplicate": "Duplicate",
+ "duplicatePolicyName": "{0} COPY",
+ "endDatePickerLabel": "Ends",
+ "endTimePickerLabel": "End time",
+ "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
+ "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
+ "enterUserText": "No user is selected. Select a user.",
+ "evaluationResult": "Evaluation result",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
+ "excludeAllTrustedLocationSelectorText": "all trusted locations",
+ "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
+ "friday": "Friday",
+ "grantControls": "Grant controls",
+ "gridNetworkTrusted": "Trusted",
+ "gridPolicyCreatedDateTime": "Creation Date",
+ "gridPolicyEnabled": "Enabled",
+ "gridPolicyModifiedDateTime": "Modified Date",
+ "gridPolicyName": "Policy Name",
+ "gridPolicyState": "State",
+ "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
+ "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
+ "groupSelectionBladeSelect": "Select groups",
+ "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "groupsSelectionBladeTitle": "Groups",
+ "helpCommonScenariosText": "Interested in common scenarios?",
+ "helpCondition1": "When any user is outside the company network",
+ "helpCondition2": "When users in the 'Managers' group sign-in",
+ "helpConditionsTitle": "Conditions",
+ "helpControl1": "They're required to sign in with multifactor authentication",
+ "helpControl2": "They are required be on an Intune compliant or domain-joined device",
+ "helpControlsTitle": "Controls",
+ "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
+ "helpIntroTitle": "What is Conditional Access?",
+ "helpLearnMoreText": "Want to learn more about Conditional Access?",
+ "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
+ "helpStartStep2": "Specify policy Conditions and Controls",
+ "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
+ "helpStartTitle": "Get started",
+ "highRisk": "High",
+ "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
+ "includeAppsTextFormat": "Include: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
+ "includeUnknownAreasCheckboxLabel": "Include unknown areas",
+ "infoCommandLabel": "Info",
+ "invalidCertDuration": "Invalid cert duration",
+ "invalidIpAddress": "Value must be a valid IP address",
+ "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
+ "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Load all",
+ "loading": "Loading...",
+ "locationConfigureNamedLocationsText": "Configure all trusted locations",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
+ "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
+ "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
+ "locationsAllLocationsLabel": "Any location",
+ "locationsAllNamedLocationsLabel": "All trusted IPs",
+ "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
+ "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
+ "locationsSelectedPrivateLinksLabel": "Selected Private Links",
+ "lowRisk": "Low",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
+ "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
+ "markAsTrustedCheckboxLabel": "Mark as trusted location",
+ "mediumRisk": "Medium",
+ "memberSelectionCommandRemove": "Remove",
+ "menuItemClaimProviderControls": "Custom controls (Preview)",
+ "menuItemClassicPolicies": "Classic policies",
+ "menuItemInsightsAndReporting": "Insights and reporting",
+ "menuItemManage": "Manage",
+ "menuItemNamedLocationsPreview": "Named locations (Preview)",
+ "menuItemNamedNetworks": "Named locations",
+ "menuItemPolicies": "Policies",
+ "menuItemTermsOfUse": "Terms of use",
+ "modifiedTimeLabel": "Modified time",
+ "monday": "Monday",
+ "nameLabel": "Name",
+ "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
+ "namedLocationTypeCountry": "Countries/Regions",
+ "namedLocationTypeLabel": "Define the location using:",
+ "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
+ "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "You need to select at least one country/region",
+ "namedNetworkDeleteCommand": "Delete",
+ "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "namedNetworkDeleteTitle": "Are you sure?",
+ "namedNetworkDownloadIpRange": "Download",
+ "namedNetworkInvalidRange": "Value must be a valid IP range.",
+ "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
+ "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
+ "namedNetworkIpRangesTab": "IP ranges",
+ "namedNetworkListAdd": "New location",
+ "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
+ "namedNetworkNameDescription": "Example: 'Redmond office'",
+ "namedNetworkNameInvalid": "The supplied name is invalid.",
+ "namedNetworkNameRequired": "You must supply a name for this location.",
+ "namedNetworkNoIpRanges": "No IP ranges",
+ "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
+ "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
+ "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
+ "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
+ "namedNetworkNotificationCreateTitle": "Creating '{0}'",
+ "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
+ "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
+ "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
+ "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
+ "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
+ "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
+ "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
+ "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
+ "namedNetworkSearchPlaceholder": "Search locations.",
+ "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
+ "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
+ "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
+ "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
+ "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
+ "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
+ "namedNetworkUploadIpRange": "Upload",
+ "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
+ "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
+ "namedNetworksAdd": "New named location",
+ "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} and {1} excluded",
+ "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} included",
+ "namedNetworksNone": "No named locations found.",
+ "namedNetworksTitle": "Configure locations",
+ "namednetworkExceedingSizeErrorBladeTitle": "Error details",
+ "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
+ "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
+ "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
+ "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
+ "newCertName": "new cert",
+ "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
+ "noPolicyRowMessage": "No policies",
+ "noSPSelected": "No service principal selected",
+ "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
+ "noUserSelected": "No user selected",
+ "noneRisk": "No risk",
+ "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
+ "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
+ "oneUserSelected": "1 user selected",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
+ "or": "{0} OR {1} ",
+ "pickerDoneCommand": "Done",
+ "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
+ "policiesBladeTitle": "Policies",
+ "policiesBladeTitleWithAppName": "Policies: {0}",
+ "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
+ "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
+ "policyAssignmentsSection": "Assignments",
+ "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
+ "policyCloudAppsDisplayTextAllApp": "All apps",
+ "policyCloudAppsLabel": "Cloud apps",
+ "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionDevicePlatform": "Device platforms",
+ "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
+ "policyConditionLocation": "Locations",
+ "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
+ "policyConditionLocationPreview": "Locations (Preview)",
+ "policyConditionSigninRisk": "Sign-in risk",
+ "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
+ "policyConditionUserRisk": "User risk",
+ "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
+ "policyConditioniClientApp": "Client apps",
+ "policyControlAllowAccessDisplayedName": "Grant access",
+ "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
+ "policyControlBladeTitle": "Grant",
+ "policyControlBlockAccessDisplayedName": "Block access",
+ "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
+ "policyControlContentDescription": "Control access enforcement to block or grant access.",
+ "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
+ "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
+ "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
+ "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
+ "policyControlRequireMamDisplayedName": "Require approved client app",
+ "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
+ "policyControlSelectAuthStrength": "Require authentication strength",
+ "policyControlsNoControlsSelected": "0 controls selected",
+ "policyControlsSection": "Access controls",
+ "policyCreatBladeTitle": "New",
+ "policyCreateButton": "Create",
+ "policyCreateFailedMessage": "Error: {0}",
+ "policyCreateFailedTitle": "Failed to create '{0}'",
+ "policyCreateInProgressTitle": "Creating '{0}'",
+ "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyCreateSuccessTitle": "Successfully created '{0}'",
+ "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "policyDeleteFailTitle": "Failed to delete '{0}'",
+ "policyDeleteInProgressTitle": "Deleting '{0}'",
+ "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
+ "policyEnforceLabel": "Enable policy",
+ "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
+ "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
+ "policyErrorUnknown": "Something went wrong, please try again later.",
+ "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
+ "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
+ "policyNameCannotBeEmpty": "Policy name can't be empty",
+ "policyNameDevice": "Device policy",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Mobile App Management policy",
+ "policyNameMfaLocation": "Multifactor authentication and location policy",
+ "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
+ "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
+ "policyOff": "Off",
+ "policyOn": "On",
+ "policyReportOnly": "Report-only",
+ "policyReviewSection": "Review",
+ "policySaveButton": "Save",
+ "policyStatusIconDescription": "Policy is Enabled",
+ "policyStatusIconEnabled": "Enabled status icon",
+ "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
+ "policyTemplateName2": "Allow {0} access only on managed devices",
+ "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
+ "policyTriggerRiskSpecific": "Select specific risk level",
+ "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
+ "policyTriggersNoConditionsSelected": "0 conditions selected",
+ "policyTriggersSelectorLabel": "Conditions",
+ "policyUpdateFailedMessage": "Error: {0}",
+ "policyUpdateFailedTitle": "Failed to update {0}",
+ "policyUpdateInProgressTitle": "Updating {0}",
+ "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyUpdateSuccessTitle": "Successfully updated {0}",
+ "primaryCol": "Primary",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
+ "requireAllControlsText": "Require all the selected controls",
+ "requireCompliantDevice": "Require compliant device",
+ "requireDomainJoined": "Require domain-joined device",
+ "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
+ "requireMFA": "Require multifactor authentication",
+ "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
+ "requireOneControlText": "Require one of the selected controls",
+ "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
+ "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
+ "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
+ "resetFilters": "Reset filters",
+ "sPRequired": "Service principal required",
+ "sPSelectorInfoBalloon": "User or Service Principal you want to test",
+ "saturday": "Saturday",
+ "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
+ "securityDefaultsPolicyName": "Security defaults",
+ "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
+ "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
+ "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
+ "selectDevicePlatforms": "Select device platforms",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Select locations",
+ "selectedSP": "Selected Service Principal",
+ "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
+ "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
+ "servicePrincipalDataGridAria": "List of available service principals",
+ "servicePrincipalDropDownLabel": "What does this policy apply to?",
+ "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
+ "servicePrincipalRadioAll": "All owned service principals",
+ "servicePrincipalRadioSelect": "Select service principals",
+ "servicePrincipalSelectionsAria": "Selected service principals grid",
+ "servicePrincipalSelectorAria": "List of chosen service principals",
+ "servicePrincipalSelectorMultiple": "{0} service principals selected",
+ "servicePrincipalSelectorSingle": "1 service principal selected",
+ "servicePrincipalSpecificExc": "Specific service principals excluded",
+ "servicePrincipalSpecificInc": "Specific service principals included",
+ "servicePrincipals": "Service principals",
+ "sessionControlBladeTitle": "Session",
+ "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
+ "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
+ "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
+ "sessionControls": "Session controls",
+ "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
+ "sessionControlsCasLabel": "Use Conditional Access App Control",
+ "sessionControlsSecureSignInLabel": "Require token binding",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} included",
+ "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
+ "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
+ "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
+ "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
+ "specificUsersExcluded": "specific users excluded",
+ "specificUsersIncluded": "Specific users included",
+ "specificUsersIncludedAndExcluded": "Specific users excluded and included",
+ "startDatePickerLabel": "Starts",
+ "startFreeTrial": "Start a free trial",
+ "startTimePickerLabel": "Start time",
+ "sunday": "Sunday",
+ "testButton": "What If",
+ "thumbprintCol": "Thumbprint",
+ "thursday": "Thursday",
+ "timeConditionAllTimesLabel": "Any time",
+ "timeConditionIntroText": "Configure the time this policy will apply to",
+ "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
+ "timeConditionSelectorLabel": "Time (Preview)",
+ "timeConditionSpecificLabel": "Specific times",
+ "timeSelectorAllTimesText": "Any time",
+ "timeSelectorSpecificTimesText": "Specific times configured",
+ "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
+ "timeZoneDropdownLabel": "Time zone",
+ "timeZoneDropdownPlaceholderText": "Select a time zone",
+ "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
+ "tooManyPoliciesTitle": "More than 50 policies found",
+ "trustedLocationStatusIconDescription": "Location is trusted",
+ "trustedLocationStatusIconEnabled": "Trusted status icon",
+ "tuesday": "Tuesday",
+ "uploadInBadState": "Unable to upload the specified file.",
+ "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
+ "upsellAppsTitle": "Secure applications",
+ "upsellBannerText": "Get a free Premium trial to use this feature",
+ "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
+ "upsellDataTitle": "Secure data",
+ "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
+ "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
+ "upsellRiskTitle": "Protect against risk",
+ "upsellTitle": "Conditional Access",
+ "upsellWhyTitle": "Why use Conditional Access?",
+ "userAppNoneOption": "None",
+ "userNamePlaceholderText": "Enter User Name",
+ "userNotSetSeletorLabel": "0 users and groups selected",
+ "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
+ "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
+ "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
+ "userOrSPSelectionBladeTitle": "Users or workload identities",
+ "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
+ "userRequired": "User Required",
+ "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
+ "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
+ "userSPRequired": "User or Service principal required",
+ "userSPSelectorTitle": "User or Workload identity",
+ "userSelectionBladeAllUsersAndGroups": "All users and groups",
+ "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
+ "userSelectionBladeExcludeTabTitle": "Exclude",
+ "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
+ "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
+ "userSelectionBladeIncludeTabTitle": "Include",
+ "userSelectionBladeIncludedSelectorTitle": "Select",
+ "userSelectionBladeSelectUsers": "Select users",
+ "userSelectionBladeSelectedUsers": "Select users and groups",
+ "userSelectionBladeTitle": "Users and groups",
+ "userSelectorBladeTitle": "Users",
+ "userSelectorExcluded": "{0} excluded",
+ "userSelectorGroupPlural": "{0} groups",
+ "userSelectorGroupSingular": "1 group",
+ "userSelectorIncluded": "{0} included",
+ "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "userSelectorSelected": "{0} selected",
+ "userSelectorTitle": "User",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} users",
+ "userSelectorUserSingular": "1 user",
+ "userSelectorWithExclusion": "{0} and {1}",
+ "usersGroupsLabel": "Users and groups",
+ "viewApprovedAppsText": "See list of approved client apps",
+ "viewCompliantAppsText": "See list of policy protected client apps",
+ "viewPolicyInformation": "View policy information",
+ "vpnBladeTitle": "VPN connectivity",
+ "vpnCertCreateFailedMessage": "Error: {0}",
+ "vpnCertCreateFailedTitle": "Failed to create {0}",
+ "vpnCertCreateInProgressTitle": "Creating {0}",
+ "vpnCertCreateSuccessMessage": "Successfully created {0}.",
+ "vpnCertCreateSuccessTitle": "Successfully created {0}",
+ "vpnCertNoRowsMessage": "No VPN certificates found",
+ "vpnCertUpdateFailedMessage": "Error: {0}",
+ "vpnCertUpdateFailedTitle": "Failed to update {0}",
+ "vpnCertUpdateInProgressTitle": "Updating {0}",
+ "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
+ "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
+ "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
+ "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
+ "vpnMenuText": "VPN connectivity",
+ "vpncertDropdownDefaultOption": "Duration",
+ "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
+ "vpncertDropdownLabel": "Select duration",
+ "vpncertDropdownOneyearOption": "1 year",
+ "vpncertDropdownThreeyearOption": "3 years",
+ "vpncertDropdownTwoyearOption": "2 years",
+ "wednesday": "Wednesday",
+ "whatIfCountry": "Country/Region",
+ "whatIfCountryInfo": "The country/region the user is signing in from.",
+ "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
+ "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
+ "whatIfIpAddress": "IP address",
+ "whatIfIpAddressInfo": "IP address the user is signing in from.",
+ "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
+ "whatIfSelectCountry": "Select country/region...",
+ "whatIfSelectDevicePlatform": "Select device platform...",
+ "whatIfSelectPrivateLink": "Select private link...",
+ "whatIfSelectSignInRisk": "Select sign-in risk...",
+ "whatIfSignInRisk": "Sign-in risk",
+ "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
+ "whatIfUnknownAreas": "Unknown Areas",
+ "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Workload identities (preview)",
+ "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
+ "workloadIdentity": "Workload identity"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Overview"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load iOS software update profiles"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS update profile",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profile"
+ },
+ "listLoadError": "Unable to load iOS software update profiles, try again later",
+ "lowercase": "iOS update policy",
+ "uppercase": "iOS Update policy"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
+ "latestUpdate": "Latest update",
+ "noLongerSupported": "Selected version is no longer supported",
+ "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
+ "prefix": "Install iOS/iPadOS",
+ "selectSupported": "Select update version supported by Apple",
+ "updateToInstall": "Update to install"
+ },
+ "Schedule": {
+ "always": "Update at next check-in",
+ "duringTimeWindows": "Update during scheduled time",
+ "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
+ "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
+ "label": "Schedule type",
+ "outsideActiveHours": "Update outside of active hours (legacy)",
+ "outsideTimeWindows": "Update outside of scheduled time",
+ "timeWindow": "Time window",
+ "timeZone": "Time zone",
+ "title": "Update policy schedule settings:",
+ "weekly": "Weekly schedule",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
+ "label": "Select version to install"
+ },
+ "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
+ "notAvailable": "N/A"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "There are no iOS update policies to display",
+ "macOsUpdates": "There are no macOS software update policies to display",
+ "windowsUpdates": "There are no update rings for Windows 10 and later to show."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Device name",
+ "deviceUpdateStatus": "Device update status",
+ "lastUpdated": "Last updated",
+ "osVersion": "OS version",
+ "userPrincipalName": "User name"
+ },
+ "maximumOSVersionFilter": "Maximum OS version",
+ "minimumOSVersionFilter": "Minimum OS version",
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by device name, user name or OS version",
+ "title": "Account summary for macOS devices"
+ },
+ "Category": {
+ "configurationDataFile": "Configuration data file",
+ "critical": "Critical",
+ "firmware": "Firmware",
+ "other": "Other"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "successfulUpdateCount": "Successful updates deployed",
+ "totalUpdateCount": "Total updates deployed",
+ "updateCategory": "Update category",
+ "updateCategoryStatus": "Update category status"
+ },
+ "noData": "No data to display"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load macOS software update profiles"
+ }
+ },
+ "State": {
+ "available": "Available",
+ "commandFailed": "Command failed",
+ "downloadFailed": "Download failed",
+ "downloadInsufficientNetwork": "Download insufficient network",
+ "downloadInsufficientPower": "Download insufficient power",
+ "downloadInsufficientSpace": "Download insufficient space",
+ "downloaded": "Downloaded",
+ "downloading": "Downloading",
+ "idle": "Idle",
+ "installFailed": "Install failed",
+ "installInsufficientPower": "Install insufficient power",
+ "installInsufficientSpace": "Install insufficient space",
+ "installing": "Installing",
+ "scheduled": "Scheduled",
+ "success": "Success",
+ "unknown": "Unknown"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "updateName": "Update name",
+ "updateStatus": "Update status",
+ "version": "Version"
+ },
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by update name or version"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS update profile",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profile"
+ },
+ "error": "Error",
+ "errorOrErrors": "Error(s)",
+ "errors": "Errors",
+ "listLoadError": "Unable to load macOS software update profiles, try again later",
+ "lowercase": "macOs update policy",
+ "other": "Other",
+ "subtitle": "MacOS software update",
+ "upToDate": "Up to date",
+ "uppercase": "macOS Update Policy"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Please try again later",
+ "title": "Failed to delete {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Please try again later"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Please try again later",
+ "title": "Failed to load {0}"
+ },
+ "idWrongFormat": "The provided id for the profile is not in the expected format."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "At least one time window should be selected",
+ "tooMany": "A maximum of 20 time windows can be configured"
+ }
+ },
+ "endDay": "End day",
+ "endTime": "End time",
+ "startDay": "Start day",
+ "startTime": "Start time",
+ "timeWindowError": "Choose a window of time that spans at least one hour."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load update ring profiles for Windows 10 and later."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Update ring for Windows 10 and later",
+ "title": "Windows Update for Business"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 and later",
+ "title": "Update ring for Windows 10 and later"
+ },
+ "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
+ "lowercase": "Update ring",
+ "uppercase": "Update Ring"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Update policy settings",
+ "updateRingSettings": "Update ring settings"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Create {0}",
+ "edit": "Edit {0}"
+ }
+ },
+ "notScannedYet": "Not scanned yet",
+ "outOfDateIosDevices": "Out of date iOS devices"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge, version 77 and later",
+ "storeApp": "Store app",
+ "office365Suite": "Microsoft 365 Apps",
+ "microsoftDefenderATP": "Microsoft Defender for Endpoint",
+ "other": "Other",
+ "webApplication": "Web Application"
+ },
+ "Filters": {
+ "ruleSyntax": "Rule syntax",
+ "filters": "Filters"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Please select a discovery script",
+ "scriptFileLabel": "Select your discovery script"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
+ "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Script",
+ "placeholder": "Click to select",
+ "searchboxPlaceholder": "Search by script name",
+ "title": "Select a discovery script"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Custom compliance rules summary"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
+ "noFileSelectedError": "Please select a json file",
+ "parseFileSelectedError": "The json file is invalid"
+ }
+ },
"TAP": {
"AccessRequirements": {
"infoText": "Configure the PIN and credential requirements that users must meet to access apps in a work context."
@@ -1311,393 +3937,193 @@
"selectOne": "Select at least one app to create a policy."
}
},
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "CoManagementAuthority": {
- "Confirmation": {
- "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
- "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
- },
- "Grid": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
- "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
- "label": "Co-management authority"
- },
- "Header": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
- },
- "Main": {
- "title": "Co-management Authority"
- },
- "MessageSaved": {
- "body": "Co-management authority policy created."
- },
- "Notification": {
- "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
- "created": "This Co-management authority policy has not been assigned to any users.",
- "creating": "Creating Co-management authority policy",
- "creatingMessage": "Creating {0} Co-management authority policy",
- "deleteError": "An error occurred while deleting Co-management authority policy",
- "deleted": "Co-management authority policy deleted.",
- "deletedMessage": "{0} Co-management authority policy is deleted.",
- "deleting": "Deleting Co-management Authority policy",
- "deletingMessage": "Deleting {0} Co-management Authority policy",
- "fetchError": "An error occurred while displaying Co-management authority policies",
- "saved": "Co-management Authority saved.",
- "savedMessage": "{0} Co-management Authority policy successfully saved.",
- "saving": "Saving Co-management authority",
- "savingMessage": "Saving {0} Co-management authority policy"
- },
- "Priority": {
- "saveError": "An error occurred while saving Co-management authority priorities",
- "saved": "Co-management authority priorities were successfully saved."
- },
- "ReloadNotification": {
- "description": "Reload the Co-management authority policy to try again.",
- "title": "Reload the Co-management authority blade"
- },
- "advancedProperty": "Advanced",
- "commandLineArgs": "Client installation command line arguments.",
- "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
- "enterArgument": "Enter argument",
- "installAgent": "Automatically install Configuration Manager agent.",
- "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
- "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
- "pageDescription": "Co-management authority profiles",
- "pageSetting": "Co-management authority Setting",
- "pageTitle": "Co-management authority",
- "settingDescription": "The co-management settings determine who owns the workloads."
- },
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "webApp": "Web link",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "TAPSettings": {
- "AllowedDataIngestionLocations": {
- "label": "Allow users to open data from selected services",
- "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
- },
- "AndroidBackup": {
- "label": "Backup org data to Android backup services",
- "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender for Endpoint",
+ "androidDeviceOwnerApplications": "Applications",
+ "androidDeviceOwnerPolicyMessages": "Custom support information",
+ "androidForWorkPassword": "Device password",
+ "appManagement": "Allow or Block apps",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Restricted Apps",
+ "applicationVisibility": "Show or Hide Apps",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, Doc Viewing, Gaming",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Apps and experience",
+ "associatedDomains": "Associated domains",
+ "autonomousSingleAppMode": "Autonomous Single App Mode",
+ "azureOperationalInsights": "Azure operational insights",
+ "bitLocker": "Windows Encryption",
+ "bootOptions": "Boot options",
+ "browser": "Browser",
+ "builtinApps": "Built-in apps",
+ "cameras": "Cameras",
+ "cellular": "Cellular",
+ "cloudAndStorage": "Cloud and Storage",
+ "cloudPrint": "Cloud Printer",
+ "complianceEmailProfile": "Email",
+ "connectedDevices": "Connected devices",
+ "connectivity": "Cellular and connectivity",
+ "contentCaching": "Content caching",
+ "controlPanelAndSettings": "Control Panel and Settings",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Custom Compliance",
+ "customConfiguration": "Custom Configuration Profile",
+ "customOMASettings": "Custom OMA-URI Settings",
+ "customPreferences": "Preference file",
+ "dFCISecuritySettings": "Security settings",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows Firewall",
+ "defenderLocalSecurityOptions": "Local device security options",
+ "defenderSecurityCenter": "Microsoft Defender Security Center",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedCredentialAuthenticationConfiguration": "Derived credential",
+ "deviceExperience": "Device experience",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Microsoft Defender Application Control",
+ "deviceHealth": "Device Health",
+ "devicePassword": "Device password",
+ "deviceProperties": "Device Properties",
+ "deviceRestrictions": "General",
+ "deviceSecurity": "System security",
+ "display": "Display",
+ "domainJoin": "Domain Join",
+ "domains": "Domains",
+ "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge kiosk mode",
+ "editionUpgrade": "Edition Upgrade",
+ "education": "Education",
+ "educationDeviceCerts": "Device certificates",
+ "educationStudentCerts": "Student certificates",
+ "educationTakeATest": "Take a Test",
+ "educationTeacherCerts": "Teacher certificates",
+ "emailProfile": "Email",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Single sign-on app extension",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Games",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Health monitoring",
+ "homeScreenLayout": "Home Screen Layout",
+ "iOSWallpaper": "Wallpaper",
+ "importedPFX": "PKCS Imported Certificate",
+ "iosDefenderAtp": "Microsoft Defender for Endpoint",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Kernel extensions",
+ "keyboardAndDictionary": "Keyboard and dictionary",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Dedicated devices",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Kiosk web browser",
+ "lockScreenMessage": "Lock Screen Message",
+ "lockedScreenExperience": "Locked Screen Experience",
+ "logging": "Reporting and Telemetry",
+ "loginItems": "Login items",
+ "loginWindow": "Login window",
+ "macDefenderAtp": "Microsoft Defender for Endpoint",
+ "maintenance": "Maintenance",
+ "malware": "Malware",
+ "messaging": "Messaging",
+ "microphonesAndSpeakers": "Microphones and speakers",
+ "networkBoundary": "Network boundary",
+ "networkProxy": "Network proxy",
+ "notifications": "App Notifications",
+ "pKCS": "PKCS Certificate",
+ "password": "Password",
+ "personalProfile": "Personal profile",
+ "personalization": "Personalization",
+ "policyOverride": "Override Group Policy",
+ "ports": "Ports",
+ "powerSettings": "Power Settings",
+ "printer": "Printer",
+ "privacy": "Privacy",
+ "privacyPerApp": "Per-app privacy exceptions",
+ "privacyPreferences": "Privacy preferences",
+ "projection": "Projection",
+ "radios": "Radios",
+ "sCCMCompliance": "Configuration Manager Compliance",
+ "sCEP": "SCEP Certificate",
+ "sCEPProperties": "SCEP Certificate",
+ "sMode": "Mode switch (Windows Insider only)",
+ "safari": "Safari",
+ "search": "Search",
+ "session": "Session",
+ "sharedDevice": "Shared iPad",
+ "sharedPCAccountManager": "Shared multi-user device",
+ "singleSignOn": "Single sign-on",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Settings",
+ "start": "Start",
+ "systemExtensions": "System extensions",
+ "systemSecurity": "System Security",
+ "trustedCert": "Trusted Certificate",
+ "uEFIAccess": "UEFI access",
+ "updates": "Updates",
+ "userRights": "User Rights",
+ "usersAndAccounts": "Users and Accounts",
+ "vPN": "Base VPN",
+ "vPNApps": "Automatic VPN",
+ "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
+ "vPNConditionalAccess": "Conditional Access",
+ "vPNConnectivity": "Connectivity",
+ "vPNDNSTriggers": "DNS Settings",
+ "vPNIKEv2": "IKEv2 settings",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Split Tunneling",
+ "vPNTrustedNetwork": "Trusted Network Detection",
+ "wakeSettings": "Wake settings",
+ "webContentFilter": "Web Content Filter",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender for Endpoint",
+ "windowsDefenderATP": "Microsoft Defender for Endpoint",
+ "windowsHelloForBusiness": "Windows Hello for Business",
+ "windowsSpotlight": "Windows Spotlight",
+ "wiredNetwork": "Wired network",
+ "wireless": "Wireless",
+ "wirelessProjection": "Wireless projection",
+ "workProfile": "Work profile settings",
+ "workProfilePassword": "Work profile password",
+ "xboxServices": "Xbox services",
+ "zebraMx": "MX profile (Zebra only)",
+ "complianceActionsLabel": "Actions for noncompliance"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Allowed URLs",
+ "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
},
- "AndroidBiometricAuthentication": {
- "label": "Biometrics instead of PIN for access",
- "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
- },
- "AndroidFingerprint": {
- "label": "Fingerprint instead of PIN for access (Android 6.0+)",
- "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
- },
- "AndroidOverrideFingerprint": {
- "label": "Override biometrics with PIN after timeout"
- },
- "AppPIN": {
- "label": "App PIN when device PIN is set",
- "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
- },
- "BlockDataIngestionIntoOrganizationDocuments": {
- "label": "Open data into Org documents",
- "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
- "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
- "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
- "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
- },
- "ConnectToVpnOnLaunch": {
- "label": "Start Microsoft Tunnel connection on app-launch",
- "tooltip": "Allow connection to VPN when app is launch"
- },
- "CredentialsForAccess": {
- "label": "Work or school account credentials for access",
- "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
- },
- "CustomBrowserDisplayName": {
- "label": "Unmanaged Browser Name",
- "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
- },
- "CustomBrowserPackageId": {
- "label": "Unmanaged Browser ID",
- "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
- },
- "CustomBrowserProtocol": {
- "label": "Unmanaged browser protocol",
- "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
- },
- "DialerRestrictionLevel": {
- "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
- "label": "Transfer telecommunication data to",
- "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "EncryptData": {
- "label": "Encrypt org data",
- "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
- },
- "EncryptDataAndroid": {
- "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
- },
- "EncryptDataIos": {
- "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 128-bit AES encryption to app data.",
- "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
- "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
- },
- "EncryptDataOnEnrolledDevices": {
- "label": "Encrypt org data on enrolled devices",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
- },
- "IOSBackup": {
- "label": "Backup org data to iTunes and iCloud backups",
- "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
- },
- "IOSFaceID": {
- "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
- "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
- },
- "IOSOverrideTouchId": {
- "label": "Override biometrics with PIN after timeout"
- },
- "IOSTouchId": {
- "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
- "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
- },
- "MessagingRedirectAppDisplayName": {
- "label": "Messaging App Name"
- },
- "MessagingRedirectAppPackageId": {
- "label": "Messaging App Package ID"
+ "ApplicationProxyRedirection": {
+ "header": "Application proxy",
+ "title": "Application proxy redirection",
+ "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
},
- "MessagingRedirectAppUrlScheme": {
- "label": "Messaging App URL Scheme"
- },
- "NotificationRestriction": {
- "label": "Org data notifications",
- "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
- },
- "OpenLinksManagedBrowser": {
- "label": "Restrict web content transfer with other apps",
- "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
- },
- "OverrideBiometric": {
- "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
- },
- "PinAccess": {
- "label": "PIN for access",
- "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
- },
- "PinLength": {
- "label": "Select minimum PIN length",
- "tooltip": "This setting specifies the minimum number of digits of a PIN."
- },
- "PinType": {
- "label": "PIN type",
- "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
- },
- "Printing": {
- "label": "Printing org data",
- "tooltip": "If blocked, the app cannot print protected data."
- },
- "ProtectedMessagingRedirectAppType": {
- "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
- "label": "Transfer messaging data to",
- "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "ReceiveData": {
- "label": "Receive data from other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ "BlockedURLs": {
+ "title": "Blocked URLs",
+ "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
+ },
+ "Bookmarks": {
+ "header": "Managed bookmarks",
+ "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
+ "uRL": "URL"
},
- "RecheckAccessAfter": {
- "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
- "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
- },
- "RequireClass3Biometrics": {
- "label": "Class 3 Biometrics (Android 9.0+)",
- "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
- },
- "RequirePinAfterBiometricChange": {
- "label": "Override Biometrics with PIN after biometric updates",
- "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
- },
- "RestrictKeyboards": {
- "duplicatePackageError": "The package ID must be unique.",
- "invalidPackageError": "Invalid package ID",
- "label": "Approved keyboards",
- "select": "Select keyboards to approve",
- "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
- "title": "Add approved keyboards",
- "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
- },
- "SaveData": {
- "label": "Save copies of org data",
- "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
- },
- "SaveDataToSelected": {
- "label": "Allow user to save copies to selected services",
- "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
- },
- "ScreenCaptureAndAndroidAssistant": {
- "label": "Screen capture and Google Assistant\n",
- "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
- },
- "SendData": {
- "label": "Send org data to other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
- },
- "SimplePin": {
- "label": "Simple PIN",
- "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
- },
- "SyncContacts": {
- "label": "Sync policy managed app data with native apps or add-ins"
- },
- "ThirdPartyKeyboards": {
- "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
- "label": "Third party keyboards"
- },
- "Timeout": {
- "label": "Timeout (minutes of inactivity)"
- },
- "WinCutCopyPaste": {
- "label": "Allow cut, copy, and paste for",
- "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
- },
- "WinPrintData": {
- "label": "Print org data",
- "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
- },
- "WinReceiveData": {
- "label": "Receive data from",
- "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
- },
- "WinSendData": {
- "label": "Send org data to",
- "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
- },
- "Tap": {
- "numberOfDays": "Number of days",
- "pinResetAfterNumberOfDays": "PIN reset after number of days",
- "previousPinBlockCount": "Select number of previous PIN values to maintain"
- }
- },
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "One block action is required for all compliance policies.",
- "graceperiod": "Schedule (days after noncompliance)",
- "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
- "subtitle": "Specify action parameters",
- "title": "Action parameters"
- },
- "List": {
- "gracePeriodDay": "{0} day after noncompliance",
- "gracePeriodDays": "{0} days after noncompliance",
- "gracePeriodHour": "{0} hour after noncompliance",
- "gracePeriodHours": "{0} hours after noncompliance",
- "gracePeriodMinute": "{0} minute after noncompliance",
- "gracePeriodMinutes": "{0} minutes after noncompliance",
- "immediately": "Immediately",
- "schedule": "Schedule",
- "scheduleInfoBalloon": "Days after noncompliance",
- "subtitle": "Specify the sequence of actions on noncompliant devices",
- "title": "Actions"
- },
- "Notification": {
- "additionalEmailLabel": "Others",
- "additionalRecipients": "Additional recipients (via email)",
- "additionalRecipientsBladeTitle": "Select additional recipients",
- "emailAddressPrompt": "Enter email addresses (separated by commas)",
- "invalidEmail": "Invalid email address",
- "messageTemplate": "Message template",
- "noneSelected": "None selected",
- "notSelected": "Not selected",
- "numSelected": "{0} selected",
- "selected": "Selected"
- },
- "block": "Mark device noncompliant",
- "lockDevice": "Lock device (local action)",
- "lockDeviceWithPasscode": "Lock device (local action)",
- "noAction": "No action",
- "noActionRow": "No actions, select 'Add' to add an action",
- "pushNotification": "Send push notification to end user",
- "remoteLock": "Remotely lock the noncompliant device",
- "removeSourceAccessProfile": "Remove source access profile",
- "retire": "Add device to retire list",
- "wipe": "Wipe",
- "emailNotification": "Send email to end user"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "required": "Required",
- "uninstall": "Uninstall"
+ "HomepageURL": {
+ "header": "Managed homepage",
+ "title": "Homepage shortcut URL",
+ "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Redirect restricted sites to personal context",
+ "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
+ }
},
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Create custom script",
- "edit": "Edit custom script"
- },
- "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
- "customScriptCapitalized": "Custom script",
- "customScriptLowercase": "custom script",
- "detectionScript": "Detection script"
- },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home Sku",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Select the number of bits contained in the key.",
- "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
- "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
- "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
- "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Subject alternative name",
- "subjectNameFormat": "Subject name format",
- "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
- },
- "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
- "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
- "configurationSettingsFormat": "Configuration settings format text",
- "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
- "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
- "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
- "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Select runtime permissions for the associated app.",
- "policyAssociatedApp": "Select the app that this policy will be associated with.",
- "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
- "policyDescription": "Optionally, enter a description for this configuration policy.",
- "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
- "policyName": "Enter a name for this configuration policy.",
- "policyPlatform": "Select the platform this app configuration policy will apply to.",
- "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
- "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
- "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
- "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
- "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
- "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
- "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
- "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
- "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
- "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
- "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
- "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
- },
+ "Languages": {
+ "ar-aE": "Arabic (U.A.E.)",
+ "ar-bH": "Arabic (Bahrain)",
+ "ar-dZ": "Arabic (Algeria)",
+ "ar-eG": "Arabic (Egypt)",
+ "ar-iQ": "Arabic (Iraq)",
+ "ar-jO": "Arabic (Jordan)",
+ "ar-kW": "Arabic (Kuwait)",
+ "ar-lB": "Arabic (Lebanon)",
+ "ar-lY": "Arabic (Libya)",
+ "ar-mA": "Arabic (Morocco)",
+ "ar-oM": "Arabic (Oman)",
+ "ar-qA": "Arabic (Qatar)",
+ "ar-sA": "Arabic (Saudi Arabia)",
+ "ar-sY": "Arabic (Syria)",
+ "ar-tN": "Arabic (Tunisia)",
+ "ar-yE": "Arabic (Yemen)",
+ "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
+ "az-latn": "Azerbaijani (Latin, Azerbaijan)",
+ "bn-bD": "Bangla (Bangladesh)",
+ "bn-iN": "Bangla (India)",
+ "bs-cyrl": "Bosnian (Cyrillic)",
+ "bs-latn": "Bosnian (Latin)",
+ "zh-cN": "Chinese (PRC)",
+ "zh-hK": "Chinese (Hong Kong S.A.R.)",
+ "zh-mO": "Chinese (Macao S.A.R.)",
+ "zh-sG": "Chinese (Singapore)",
+ "zh-tW": "Chinese (Taiwan)",
+ "hr-bA": "Croatian (Latin)",
+ "hr-hR": "Croatian (Croatia)",
+ "nl-bE": "Dutch (Belgium)",
+ "nl-nL": "Dutch (Netherlands)",
+ "en-aU": "English (Australia)",
+ "en-bZ": "English (Belize)",
+ "en-cA": "English (Canada)",
+ "en-cabn": "English (Caribbean)",
+ "en-iE": "English (Ireland)",
+ "en-iN": "English (India)",
+ "en-jM": "English (Jamaica)",
+ "en-mY": "English (Malaysia)",
+ "en-nZ": "English (New Zealand)",
+ "en-pH": "English (Republic of the Philippines)",
+ "en-sG": "English (Singapore)",
+ "en-tT": "English (Trinidad and Tobago)",
+ "en-uK": "English (United Kingdom)",
+ "en-uS": "English (United States)",
+ "en-zA": "English (South Africa)",
+ "en-zW": "English (Zimbabwe)",
+ "fr-bE": "French (Belgium)",
+ "fr-cA": "French (Canada)",
+ "fr-cH": "French (Switzerland)",
+ "fr-fR": "French (France)",
+ "fr-lU": "French (Luxembourg)",
+ "fr-mC": "French (Monaco)",
+ "de-aT": "German (Austria)",
+ "de-cH": "German (Switzerland)",
+ "de-dE": "German (Germany)",
+ "de-lI": "German (Liechtenstein)",
+ "de-lU": "German (Luxembourg)",
+ "iu-cans": "Inuktitut (Syllabics, Canada)",
+ "iu-latn": "Inuktitut (Latin, Canada)",
+ "it-cH": "Italian (Switzerland)",
+ "it-iT": "Italian (Italy)",
+ "ms-bN": "Malay (Brunei Darussalam)",
+ "ms-mY": "Malay (Malaysia)",
+ "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
+ "mn-mN": "Mongolian (Cyrillic, Mongolia)",
+ "no-nB": "Norwegian, Bokmål (Norway)",
+ "no-nn": "Norwegian, Nynorsk (Norway)",
+ "pt-bR": "Portuguese (Brazil)",
+ "pt-pT": "Portuguese (Portugal)",
+ "quz-bO": "Quechua (Bolivia)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Peru)",
+ "smj-nO": "Sami, Lule (Norway)",
+ "smj-sE": "Sami, Lule (Sweden)",
+ "se-fI": "Sami, Northern (Finland)",
+ "se-nO": "Sami, Northern (Norway)",
+ "se-sE": "Sami, Northern (Sweden)",
+ "sma-nO": "Sami, Southern (Norway)",
+ "sma-sE": "Sami, Southern (Sweden)",
+ "smn": "Sami, Inari (Finland)",
+ "sms": "Sami, Skolt (Finland)",
+ "sr-Cyrl-bA": "Serbian (Cyrillic)",
+ "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
+ "sr-Latn-bA": "Serbian (Latin)",
+ "sr-Latn-rS": "Serbian (Latin, Serbia)",
+ "dsb": "Lower Sorbian (Germany)",
+ "hsb": "Upper Sorbian (Germany)",
+ "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
+ "es-aR": "Spanish (Argentina)",
+ "es-bO": "Spanish (Bolivia)",
+ "es-cL": "Spanish (Chile)",
+ "es-cO": "Spanish (Colombia)",
+ "es-cR": "Spanish (Costa Rica)",
+ "es-dO": "Spanish (Dominican Republic)",
+ "es-eC": "Spanish (Ecuador)",
+ "es-eS": "Spanish (Spain)",
+ "es-gT": "Spanish (Guatemala)",
+ "es-hN": "Spanish (Honduras)",
+ "es-mX": "Spanish (Mexico)",
+ "es-nI": "Spanish (Nicaragua)",
+ "es-pA": "Spanish (Panama)",
+ "es-pE": "Spanish (Peru)",
+ "es-pR": "Spanish (Puerto Rico)",
+ "es-pY": "Spanish (Paraguay)",
+ "es-sV": "Spanish (El Salvador)",
+ "es-uS": "Spanish (United States)",
+ "es-uY": "Spanish (Uruguay)",
+ "es-vE": "Spanish (Venezuela)",
+ "sv-fI": "Swedish (Finland)",
+ "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
+ "uz-latn": "Uzbek (Latin, Uzbekistan)",
+ "af": "Afrikaans (South Africa)",
+ "sq": "Albanian (Albania)",
+ "am": "Amharic (Ethiopia)",
+ "hy": "Armenian (Armenia)",
+ "as": "Assamese (India)",
+ "ba": "Bashkir (Russia)",
+ "eu": "Basque (Basque)",
+ "be": "Belarusian (Belarus)",
+ "br": "Breton (France)",
+ "bg": "Bulgarian (Bulgaria)",
+ "ca": "Catalan (Catalan)",
+ "co": "Corsican (France)",
+ "cs": "Czech (Czech Republic)",
+ "da": "Danish (Denmark)",
+ "dv": "Divehi (Maldives)",
+ "et": "Estonian (Estonia)",
+ "fo": "Faroese (Faroe Islands)",
+ "fil": "Filipino (Philippines)",
+ "fi": "Finnish (Finland)",
+ "gl": "Galician (Galician)",
+ "ka": "Georgian (Georgia)",
+ "el": "Greek (Greece)",
+ "gu": "Gujarati (India)",
+ "ha": "Hausa (Latin, Nigeria)",
+ "he": "Hebrew (Israel)",
+ "hi": "Hindi (India)",
+ "hu": "Hungarian (Hungary)",
+ "is": "Icelandic (Iceland)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonesian (Indonesia)",
+ "ga": "Irish (Ireland)",
+ "xh": "isiXhosa (South Africa)",
+ "zu": "isiZulu (South Africa)",
+ "ja": "Japanese (Japan)",
+ "kn": "Kannada (India)",
+ "kk": "Kazakh (Kazakhstan)",
+ "km": "Khmer (Cambodia)",
+ "rw": "Kinyarwanda (Rwanda)",
+ "sw": "Kiswahili (Kenya)",
+ "kok": "Konkani (India)",
+ "ko": "Korean (Korea)",
+ "ky": "Kyrgyz (Kyrgyzstan)",
+ "lo": "Lao (Lao P.D.R.)",
+ "lv": "Latvian (Latvia)",
+ "lt": "Lithuanian (Lithuania)",
+ "lb": "Luxembourgish (Luxembourg)",
+ "mk": "Macedonian (North Macedonia)",
+ "ml": "Malayalam (India)",
+ "mt": "Maltese (Malta)",
+ "mi": "Maori (New Zealand)",
+ "mr": "Marathi (India)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepali (Nepal)",
+ "oc": "Occitan (France)",
+ "or": "Odia (India)",
+ "ps": "Pashto (Afghanistan)",
+ "fa": "Persian",
+ "pl": "Polish (Poland)",
+ "pa": "Punjabi (India)",
+ "ro": "Romanian (Romania)",
+ "rm": "Romansh (Switzerland)",
+ "ru": "Russian (Russia)",
+ "sa": "Sanskrit (India)",
+ "st": "Sesotho sa Leboa (South Africa)",
+ "tn": "Setswana (South Africa)",
+ "si": "Sinhala (Sri Lanka)",
+ "sk": "Slovak (Slovakia)",
+ "sl": "Slovenian (Slovenia)",
+ "sv": "Swedish (Sweden)",
+ "syr": "Syriac (Syria)",
+ "tg": "Tajik (Cyrillic, Tajikistan)",
+ "ta": "Tamil (India)",
+ "tt": "Tatar (Russia)",
+ "te": "Telugu (India)",
+ "th": "Thai (Thailand)",
+ "bo": "Tibetan (PRC)",
+ "tr": "Turkish (Turkey)",
+ "tk": "Turkmen (Turkmenistan)",
+ "uk": "Ukrainian (Ukraine)",
+ "ur": "Urdu (Islamic Republic of Pakistan)",
+ "vi": "Vietnamese (Vietnam)",
+ "cy": "Welsh (United Kingdom)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (PRC)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Built-in Role",
+ "customCloudPCRole": "Custom Windows 365 role",
+ "customIntuneRole": "Custom Intune role",
+ "customRole": "Custom Role"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "App Version",
+ "dependencyName": "Dependency name",
+ "lastModifiedTime": "Last modified time",
+ "relationship": "Relationship",
+ "replaced": "Replaced",
+ "searchPlaceholder": "Filter by app name",
+ "status": "Status details",
+ "statusDetails": "Status",
+ "supersedenceName": "Supersedence name"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Child dependency",
+ "indirectSupersedence": "Not directly related",
+ "supersedenceAncestors": "Superseding",
+ "supersedenceDescendants": "Superseded"
+ },
+ "SupersededReplaced": {
+ "no": "No",
+ "yes": "Yes"
+ },
+ "Tabs": {
+ "chart": "Chart",
+ "dependency": "Dependency",
+ "label": "View: ",
+ "supersedence": "Supersedence",
+ "table": "Table"
+ },
+ "dependencyGraphAriaLabel": "App dependency chart",
+ "supersedenceGraphAriaLabel": "App supersedence chart"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Number of days to wait before restart is enforced"
+ },
+ "Description": {
+ "label": "Description"
+ },
+ "Name": {
+ "label": "Name"
+ },
+ "QualityUpdateRelease": {
+ "label": "Expedite installation of quality updates if device OS version less than:"
+ },
+ "bladeTitle": "Quality updates Windows 10 and later (preview)",
+ "loadError": "Loading failed!"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Settings"
+ },
+ "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
+ "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
+ "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ },
+ "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
+ "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
+ "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
+ "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
+ "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
+ "appSharingToLevel3": "{0}: Allow sending org data to any app",
+ "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
+ "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
+ "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
+ "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
+ "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
+ "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
+ "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
+ "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
+ "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
+ "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
+ "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
+ "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
+ "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
+ "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
+ "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
+ "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
+ "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
+ "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
+ "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
+ "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
+ "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
+ "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
+ "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
+ "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
+ "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
+ "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
+ "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
+ "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
+ "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
+ "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
+ "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
+ "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
+ "checkInput": "Check input for validity",
+ "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
+ "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
+ "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
+ "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
+ "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
+ "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
+ "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
+ "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
+ "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
+ "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
+ "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
+ "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
+ "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
+ "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
+ "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
+ "name": "The name of this network boundary",
+ "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
+ "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
+ "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
+ "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
+ "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
+ "protectUnderLock": "Protects app content while the device is in a locked state.",
+ "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
+ "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
+ "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
+ "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
+ "required": "Required",
+ "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
+ "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
+ "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
+ "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
+ "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ },
+ "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Create custom script",
+ "edit": "Edit custom script"
+ },
+ "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
+ "customScriptCapitalized": "Custom script",
+ "customScriptLowercase": "custom script",
+ "detectionScript": "Detection script"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Default",
+ "header": "Update Priority",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Auto-update",
+ "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Allow user to snooze the restart notification",
+ "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
+ "durationInMinutes": "Device restart grace period (minutes)",
+ "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Time zone",
+ "local": "Device time zone",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Date and time",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
+ "deadlineTimeLabel": "App installation deadline",
+ "defaultTime": "As soon as possible",
+ "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
+ "specificTime": "A specific date and time",
+ "startTimeColumnLabel": "Availability",
+ "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
+ "startTimeLabel": "App availability"
+ },
+ "restartGracePeriodHeader": "Restart grace period",
+ "restartGracePeriodLabel": "Device restart grace period",
+ "summaryTitle": "End user experience"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Assign custom attribute to at least one group. Go to Properties to edit assignments.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Shell script",
"successfullySavedPolicy": "Saved {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64-bit",
+ "thirtyTwoBit": "32-bit"
+ },
+ "Countries": {
+ "ae": "United Arab Emirates",
+ "ag": "Antigua and Barbuda",
+ "ai": "Anguilla",
+ "al": "Albania",
+ "am": "Armenia",
+ "ao": "Angola",
+ "ar": "Argentina",
+ "at": "Austria",
+ "au": "Australia",
+ "az": "Azerbaijan",
+ "bb": "Barbados",
+ "be": "Belgium",
+ "bf": "Burkina Faso",
+ "bg": "Bulgaria",
+ "bh": "Bahrain",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolivia",
+ "br": "Brazil",
+ "bs": "Bahamas",
+ "bt": "Bhutan",
+ "bw": "Botswana",
+ "by": "Belarus",
+ "bz": "Belize",
+ "ca": "Canada",
+ "cg": "Republic Of Congo",
+ "ch": "Switzerland",
+ "cl": "Chile",
+ "cn": "China",
+ "co": "Colombia",
+ "cr": "Costa Rica",
+ "cv": "Cape Verde",
+ "cy": "Cyprus",
+ "cz": "Czech Republic",
+ "de": "Germany",
+ "dk": "Denmark",
+ "dm": "Dominica",
+ "do": "Dominican Republic",
+ "dz": "Algeria",
+ "ec": "Ecuador",
+ "ee": "Estonia",
+ "eg": "Egypt",
+ "es": "Spain",
+ "fi": "Finland",
+ "fj": "Fiji",
+ "fm": "Federated States Of Micronesia",
+ "fr": "France",
+ "gb": "United Kingdom",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Greece",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hong Kong",
+ "hn": "Honduras",
+ "hr": "Croatia",
+ "hu": "Hungary",
+ "id": "Indonesia",
+ "ie": "Ireland",
+ "il": "Israel",
+ "in": "India",
+ "is": "Iceland",
+ "it": "Italy",
+ "jm": "Jamaica",
+ "jo": "Jordan",
+ "jp": "Japan",
+ "ke": "Kenya",
+ "kg": "Kyrgyzstan",
+ "kh": "Cambodia",
+ "kn": "St. Kitts and Nevis",
+ "kr": "Republic Of Korea",
+ "kw": "Kuwait",
+ "ky": "Cayman Islands",
+ "kz": "Kazakstan",
+ "la": "Lao People’s Democratic Republic",
+ "lb": "Lebanon",
+ "lc": "St. Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Lithuania",
+ "lu": "Luxembourg",
+ "lv": "Latvia",
+ "md": "Republic Of Moldova",
+ "mg": "Madagascar",
+ "mk": "North Macedonia",
+ "ml": "Mali",
+ "mn": "Mongolia",
+ "mo": "Macau",
+ "mr": "Mauritania",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Mexico",
+ "my": "Malaysia",
+ "mz": "Mozambique",
+ "na": "Namibia",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Netherlands",
+ "no": "Norway",
+ "np": "Nepal",
+ "nz": "New Zealand",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua New Guinea",
+ "ph": "Philippines",
+ "pk": "Pakistan",
+ "pl": "Poland",
+ "pt": "Portugal",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Romania",
+ "ru": "Russia",
+ "sa": "Saudi Arabia",
+ "sb": "Solomon Islands",
+ "sc": "Seychelles",
+ "se": "Sweden",
+ "sg": "Singapore",
+ "si": "Slovenia",
+ "sk": "Slovakia",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Suriname",
+ "st": "Sao Tome and Principe",
+ "sv": "El Salvador",
+ "sz": "Swaziland",
+ "tc": "Turks and Caicos",
+ "td": "Chad",
+ "th": "Thailand",
+ "tj": "Tajikistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunisia",
+ "tr": "Turkey",
+ "tt": "Trinidad and Tobago",
+ "tw": "Taiwan",
+ "tz": "Tanzania",
+ "ua": "Ukraine",
+ "ug": "Uganda",
+ "us": "United States",
+ "uy": "Uruguay",
+ "uz": "Uzbekistan",
+ "vc": "St. Vincent and The Grenadines",
+ "ve": "Venezuela",
+ "vg": "British Virgin Islands",
+ "vn": "Vietnam",
+ "ye": "Yemen",
+ "za": "South Africa",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "This setting is not configurable via OMA-URI, as it is available in the settings catalog. Please navigate to the settings catalog to configure this setting."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Select a configuration profile file"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "These settings work for devices that were enrolled with or without user approval through device enrollment, and for devices enrolled with automated device enrollment (formerly DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Device enrollment and automated device enrollment",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Device enrollment and automated device enrollment",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
+ "deviceExperienceTypeDescription": "Based on the experience you want to configure, select Kiosk Mode or Microsoft Launcher to start configuring the experience on your devices. If you don't select a device experience type, users will see the device's default home screen experience.",
+ "deviceExperienceTypeKioskMode": "Kiosk mode (dedicated and fully managed)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft launcher (fully managed only)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Show",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
+ "deviceExperienceTypeName": "Device experience type",
"deviceGuardCredentialGuardDescription": "Enabling with UEFI lock ensures that Credential Guard cannot be remotely disabled. Enabling without UEFI lock allows Credential Guard to be disabled remotely via Group Policy.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune Device ID",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Number of days before transitioning from Auto Restarts scheduled outside of active hours to Engaged Restart, which requires the user to schedule.",
"engagedRestartTransitionScheduleName": "Transition users to engaged restart after an auto-restart (days)",
"enhancedOption": "Enhanced (1903 and earlier)",
- "enrollmentProfileTypeDedicatedDevice": "Dedicated device",
- "enrollmentProfileTypeDescription": "Select an enrollment profile type to start configuring Microsoft Launcher or Microsoft Managed Home Screen on your devices. If you don't select a profile type, users will see the device's default home screen experience.",
- "enrollmentProfileTypeFullyManaged": "Fully managed",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Show",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
- "enrollmentProfileTypeName": "Enrollment profile type",
"enrollmentSettingsHeading": "Enrollment Settings",
"enterOnlyOneForDns": "Enter a list of DNS servers and/or a proxy server.",
"enterpriseModeLoggingExample": "e.g. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Fully managed and corporate-owned work profile devices",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "These settings only work for fully managed and dedicated devices.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Fully managed and dedicated devices",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "These settings only work for fully managed and dedicated devices operating with a kiosk policy.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Fully managed and dedicated devices (kiosk mode only)",
"gameCenterBlockedMacDescription": "Yes disables Game Center, and the Game Center icon is removed from the Home screen. Available for devices running macOS versions 10.13 or later.",
"gameCenterBlockedMacName": "Block Game Center",
"gamingPageDescription": "Block access to Gaming in Settings app.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Configures the logon type to access the applications on this kiosk device.",
"kioskShowTaskbarDesc": "Show or hide the Windows taskbar on the kiosk.",
"kioskShowTaskbarName": "Windows Taskbar",
+ "kioskSingleInfoBoxText": "Single app kiosk mode – Locks the device to run the selected app. To use this mode, you must first approve and assign the selected app from the client apps workload. On fully managed devices, the only selected app that will apply is Managed Home Screen. All other apps will be treated as a required app instead.",
"kioskStartDateTime": "Maintenance Window Start Time",
"kioskStartMenuLayoutXmlDesc": "Provide an XML layout that defines in what order apps should be displayed on the Start Menu",
"kioskStartMenuLayoutXmlDescV2": "Importing an XML file configuring the Start layout overrides the existing display order and tile size selections. Learn more",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Must be a valid file path",
"mustBeAValidHttpsUrl": "Must be a valid https url",
"mustBeAValidIPAddress": "Must be a valid IP address (e.g. 192.168.0.1 or 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Value must be a valid IP address or FQDN with optional port number.",
"mustBeAValidIPv4Address": "Must be a valid IPv4 address (e.g. 192.168.0.1)",
"mustBeAValidIPv6Address": "Must be a valid IPv6 address (e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Must be a valid image URL such as www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Windows Firewall rules from the local store (Public networks)",
"publicNetworkName": "Public (non-discoverable) network",
"publicOutboundConnectionsSummaryLabel": "Default action for outbound connections (Public networks)",
- "publicPlayStoreEnabledDescription": "Users get access to all apps, except the ones you’ve required uninstall in Client Apps. If you choose \"Not configured\" for this setting, users can only access the apps you’ve listed as available or required in Client Apps.",
+ "publicPlayStoreEnabledDescription": "If you select \"Allow\", users get access to all apps, except the ones you've required uninstall in Client Apps. If you choose \"Block\" or \"Not configured\" for this setting, users can only access the apps you've listed as available or required in Client Apps.",
"publicPlayStoreEnabledName": "Allow access to all apps in Google Play store",
- "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Not configured\", all apps not explicitly allowed for the user will be removed from the device.",
+ "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Block\" or \"Not configured\", all apps will be removed from the device, except apps you've listed as available or required in Client Apps.",
+ "publicPlayStoreSelectionAllowList": "Block",
+ "publicPlayStoreSelectionBlockList": "Allow",
+ "publicPlayStoreSelectionNotConfigured": "Not configured",
"publicShieldedSummaryLabel": "Shielded (Public networks)",
"publicStealthModeSummaryLabel": "Stealth mode (Public networks)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Unicast responses to multicast broadcasts (Public networks)",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Device",
"licenseTypeUser": "User"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Property",
- "rule": "Rule",
- "ruleDetails": "Rule Details",
- "value": "Value"
- },
- "assignIf": "Assign profile if",
- "deleteWarning": "This will delete the selected Applicability Rule",
- "dontAssignIf": "Don't assign profile if",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "and {0} more",
- "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
- "maxText": "Max",
- "minText": "Min",
- "noActionRow": "No Applicability Rules Specified",
- "oSVersion": "e.g. 1.2.3.4",
- "toText": "to",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "OS edition",
- "windows10OsVersion": "OS version",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Equals",
- "greaterThan": "Greater than",
- "greaterThanOrEqualTo": "Greater than or equal to",
- "lessThan": "Less than",
- "lessThanOrEqualTo": "Less than or equal to",
- "notEqualTo": "Not equal to"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Enforce script signature check and run script silently",
- "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
- "header": "Use a custom detection script",
- "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
- "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileNotSelectedValidation": "No script file is selected.",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
- "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Date created",
- "dateModified": "Date modified",
- "doesNotExist": "File or folder does not exist",
- "fileOrFolderExists": "File or folder exists",
- "sizeInMB": "Size in MB",
- "version": "String (version)"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "fileOrFolder": "File or folder",
- "fileOrFolderToolTip": "The file or folder to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "path": "Path",
- "pathTooltip": "The full path of the folder containing the file or folder to detect.",
- "value": "Value",
- "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
- },
- "GridColumns": {
- "pathOrCode": "Path/Code",
- "type": "Type"
- },
- "MsiRule": {
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
- "productCode": "MSI product code",
- "productCodeTooltip": "A valid MSI product code for the app.",
- "productVersion": "Value",
- "productVersionCheck": "MSI product version check",
- "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
- "productVersionTooltip": "Enter the MSI product version for the app."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Integer comparison",
- "keyDoesNotExist": "Key does not exist",
- "keyExists": "Key exists",
- "stringComparison": "String comparison",
- "valueDoesNotExist": "Value does not exist",
- "valueExists": "Value exists",
- "versionComparison": "Version comparison"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "value": "Value",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the registry value to detect.",
- "valueTooltip": "Select a value that matches the selected detection method."
- },
- "RuleTypeOptions": {
- "file": "File",
- "mSI": "MSI",
- "registry": "Registry"
- },
- "gridAriaLabel": "Detection Rules",
- "header": "Create a rule that indicates the presence of the app.",
- "noRulesSelectedPlaceholder": "No rules are specified.",
- "ruleTableLimit": "You can add up to 25 detection rules",
- "ruleType": "Rule type",
- "ruleTypeTooltip": "Choose the type of detection rule to add."
- },
- "RuleConfigurationOptions": {
- "customScript": "Use a custom detection script",
- "manual": "Manually configure detection rules"
- },
- "bladeTitle": "Detection rules",
- "header": "Configure app specific rules used to detect the presence of the app.",
- "rulesFormat": "Rules format",
- "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
- "selectorLabel": "Detection rules"
+ "BooleanActions": {
+ "allow": "Allow",
+ "block": "Block",
+ "configured": "Configured",
+ "disable": "Disable",
+ "dontRequire": "Don't Require",
+ "enable": "Enable",
+ "hide": "Hide",
+ "limit": "Limit",
+ "notConfigured": "Not configured",
+ "require": "Require",
+ "show": "Show",
+ "yes": "Yes"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Endpoint detection and response"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "App and browser isolation",
- "aSRApplicationControl": "Application control",
- "aSRAttackSurfaceReduction": "Attack surface reduction rules",
- "aSRDeviceControl": "Device control",
- "aSRExploitProtection": "Exploit protection",
- "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
- "aVExclusions": "Microsoft Defender Antivirus exclusions",
- "antivirus": "Microsoft Defender Antivirus",
- "cloudPC": "Windows 365 Security Baseline",
- "default": "Endpoint Security",
- "defenderTest": "Microsoft Defender for Endpoint demo",
- "diskEncryption": "BitLocker",
- "eDR": "Endpoint detection and response",
- "edgeSecurityBaseline": "Microsoft Edge baseline",
- "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
- "editionUpgradeConfiguration": "Edition upgrade and mode switch",
- "firewall": "Windows Firewall",
- "firewallRules": "Windows Firewall rules",
- "identityProtection": "Account protection",
- "identityProtectionPreview": "Account protection (preview)",
- "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
- "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
- "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
- "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS firewall",
- "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
- "office365Baseline": "Microsoft Office O365 baseline",
- "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
- "securityBaselines": "Security Baselines",
- "test": "Test Template",
- "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
- "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
- "windowsSecurityExperience": "Windows Security experience"
- },
- "Firewall": {
- "mDE": "Windows Firewall"
- },
- "FirewallRules": {
- "mDE": "Windows Firewall Rules"
- },
- "OneDriveKnownFolderMove": {
- "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Account Protection",
- "administrativeTemplates": "Administrative Templates",
- "androidCompliancePolicy": "Android compliance policy",
- "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
- "applicationControl": "App Control for Business",
- "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
- "bitlocker": "BitLocker",
- "custom": "Custom",
- "deliveryOptimization": "Delivery Optimization",
- "derivedPersonalIdentityVerificationCredential": "Derived credential",
- "deviceControl": "Device Control",
- "deviceFeatures": "Device features",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Device Lock",
- "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
- "deviceRestrictions": "Device restrictions",
- "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
- "domainJoinPreview": "Domain Join",
- "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
- "education": "Education",
- "email": "Email",
- "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
- "endpointProtection": "Endpoint protection",
- "expeditedCheckin": "Mobile device management configuration",
- "exploitProtection": "Exploit Protection",
- "extensions": "Extensions",
- "hardwareConfigurations": "BIOS Configurations and other settings",
- "identityProtection": "Identity protection",
- "iosCompliancePolicy": "iOS compliance policy",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Local user group membership",
- "macCompliancePolicy": "Mac compliance policy",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
- "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
- "microsoftDefenderFirewallRules": "Windows Firewall Rules",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
- "mxProfileZebraOnly": "MX profile (Zebra only)",
- "networkBoundary": "Network boundary",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Override Group Policy",
- "pkcsCertificate": "PKCS certificate",
- "pkcsImportedCertificate": "PKCS imported certificate",
- "preferenceFile": "Preference file",
- "presets": "Presets",
- "scepCertificate": "SCEP certificate",
- "secureAssessmentEducation": "Secure assessment (Education)",
- "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
- "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
- "settingsCatalog": "Settings Catalog",
- "sharedMultiUserDevice": "Shared multi-user device",
- "softwareUpdates": "Software Updates",
- "trustedCertificate": "Trusted certificate",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi import",
- "windows10CompliancePolicy": "Windows 10/11 compliance policy",
- "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
- "windows10XScep": "SCEP certificate - TEST",
- "windows10XTrustedCertificate": "Trusted certificate - TEST",
- "windows10XVPN": "VPN - TEST",
- "windows10XWifi": "WIFI - TEST",
- "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
- "windows365SecurityBaseline": "Windows 365 Security Baseline",
- "windows8CompliancePolicy": "Windows 8 compliance policy",
- "windowsHealthMonitoring": "Windows health monitoring",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
- "windowsUpdateforBusiness": "Windows Update for Business",
- "wiredNetwork": "Wired network",
- "workProfile": "Personally-owned work profile"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Make update available gradually",
- "immediateStart": "Make update available as soon as possible",
- "startDateOnly": "Make update available on a specific date"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Managed devices",
- "devicesWithoutEnrollment": "Managed apps"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filter",
- "assignmentFilterTypeColumnHeader": "Filter mode",
- "assignmentToast": "End user notifications",
- "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
- "autoUpdate": "Auto-update",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
- "groupTableHeader": "Group",
- "installContextLabel": "Install Context",
- "isRemovable": "Install as removable",
- "licenseTypeLabel": "License type",
- "modeTableHeader": "Group mode",
- "policySet": "Policy Set",
- "preventAutoAppUpdate": "Prevent automatic app updates",
- "preventManagedAppBackup": "Prevent iCloud app backup",
- "restartGracePeriodHeader": "Restart grace period",
- "startTimeColumnLabel": "Availability",
- "tracks": "Tracks",
- "uninstallOnRemoval": "Uninstall on device removal",
- "updateMode": "Update Priority",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD web app",
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office Suite",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeAddIn": "Office add-in",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "sharePointApp": "SharePoint app",
- "teamsApp": "Teams app",
- "webApp": "Web link",
- "win32CatalogApp": "Windows catalog app (Win32)",
- "winGetPublicApp": "Windows Package Manager Community Repository",
- "winGetStoreApp": "Microsoft Store app (new)",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "AssignmentToast": {
- "hideAll": "Hide all toast notifications",
- "showAll": "Show all toast notifications",
- "showReboot": "Show toast notifications for computer restarts"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Yes",
- "notConfigured": "No"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "App install may force a device restart",
- "basedOnReturnCode": "Determine behavior based on return codes",
- "force": "Intune will force a mandatory device restart",
- "suppress": "No specific action"
- },
- "FilterType": {
- "exclude": "Exclude",
- "include": "Include",
- "none": "None"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "notApplicable": "Not applicable",
- "required": "Required",
- "uninstall": "Uninstall"
- },
- "SettingType": {
- "assignmentType": "Assignment type",
- "deviceLicensing": "License type",
- "installContext": "Uninstall on device removal",
- "toastSettings": "End user notifications",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Default",
- "postponed": "Postponed",
- "priority": "High Priority"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Configure devices for initial provisioning.",
- "title": "Device preparation"
- },
- "EnrollmentSettings": {
- "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
- "title": "Enrollment settings"
- },
- "OSConfiguration": {
- "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
- "menuTitle": "Windows operating system recovery configuration"
- },
- "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
- "coManagementAuthorityTitle": "Co-management Settings ",
- "deploymentProfiles": "Windows Autopilot deployment profiles",
- "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
- "descriptionLabel": "Windows enrollment methods",
- "enrollmentStatusPage": "Enrollment Status Page"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Automatically approve all recommended driver updates",
- "manual": "Manually approve and deploy driver updates"
- },
- "BulkActions": {
- "button": "Bulk actions"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Approval method:"
- },
- "DeploymentDeferralInDays": {
- "label": "Make updates available after",
- "units": "(days)",
- "value": "{0} days"
- },
- "DriverAction": {
- "header": "Select an action below.",
- "label": "Driver action",
- "placeholder": "Select an action"
- },
- "IncludedDrivers": {
- "label": "Included drivers"
- },
- "SelectDrivers": {
- "header": "Select drivers to include in your bulk action"
- },
- "SelectDriversToInclude": {
- "button": "Select drivers to include"
- },
- "SelectLessDrivers": {
- "validation": "At most one hundred drivers can be selected"
- },
- "SelectMoreDrivers": {
- "validation": "At least one driver should be selected"
- },
- "SelectedDrivers": {
- "label": "Selected drivers"
- },
- "availabilityDate": "Make available in Windows Update",
- "bladeTitle": "Driver updates Windows 10 and later (preview)",
- "lastSync": "Last sync:",
- "lastSyncDefaultText": "Pending initial inventory collection",
- "loadError": "Loading failed!"
- },
- "DriverStatus": {
- "approved": "Approved",
- "declined": "Declined",
- "export": "Exporting recommended drivers",
- "needsReview": "Needs review",
- "paused": "Paused"
- },
- "DriversToReview": {
- "text": "{0} to review"
- },
- "Subtitle": {
- "automatic": "Automatic approval driver update policy",
- "manual": "Manual approval driver update policy"
- },
- "SyncNotification": {
- "failure": "Unable to sync {0}",
- "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
- "pending": "{0} sync in progress",
- "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
- "success": "{0} sync complete",
- "successDescription": "Sync with WUfB service completed at {0}"
- },
- "SyncSpinner": {
- "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
- },
- "TabName": {
- "basics": "Basics",
- "driverUpdateSettings": "Settings",
- "otherDrivers": "Other drivers",
- "properties": "Properties",
- "recommendedDrivers": "Recommended drivers"
- },
- "driverAddFilter": "Add filter",
- "driverApplicableDevices": "Applicable devices",
- "driverApprovalStatus": "Status",
- "driverBulkActions": "Bulk actions",
- "driverClass": "Driver class",
- "driverCount": "Showing {0} to {1} of {2} records",
- "driverFilterNoneSelected": "None selected",
- "driverManufacturer": "Manufacturer",
- "driverName": "Driver name",
- "driverNameLower": "windows driver update deployment",
- "driverNameUpper": "Windows driver update deployment",
- "driverRefresh": "Refresh",
- "driverReleaseDate": "Release date",
- "driverSearch": "Search",
- "driverSearchKeyword": "Enter search keyword",
- "driverVersion": "Version",
- "firstDeploymentDate": "First Deployment",
- "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
- "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
- "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
- "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
- "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
- "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
- "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
- "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
- "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
- "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
- "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
- "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
- "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
- "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
- "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
- "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
- "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
- "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
- "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
- "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
- "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
- },
- "Inputs": {
- "accountDomain": "Account domain",
- "accountDomainHint": "e.g. contosodomain",
- "accountDomainInfoBalloon": "Specify the user’s account domain.",
- "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
- "allowContactSetting": "Allow user to change contact setting",
- "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
- "allowUserChange": "Allow user to change setting",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
- "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "App install context",
- "appUrlLabel": "Appstore URL",
- "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Applicable device type",
- "assignmentActionLabel": "Mode",
- "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
- "authenticationMetod": "Authentication method",
- "authenticationType": "Authentication type",
- "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
- "availableLicenseCount": "Available licenses",
- "basicAuth": "Basic authentication",
- "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
- "bookNameLabel": "Book name",
- "bundleDescriptionHint": "Enter a description that describes the apps included.",
- "calendar": "Calendar",
- "categoryLabel": "Category",
- "categoryNameLabel": "Default name",
- "certProfileType": "Certificate profile type",
- "certificate": "Certificate",
- "certificates": "Certificates",
- "commandLineLabel": "Command-line arguments",
- "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
- "configurationSettingsFormatLabel": "Configuration settings format",
- "configurationSettingsLabel": "Settings format",
- "contactSync": "Save Contacts",
- "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
- "contacts": "Contacts",
- "createdDateTime": "Created",
- "defaultCategoryHint": "Default categories cannot be changed",
- "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
- "descriptionGenericLabel": "Description",
- "descriptionHint": "Enter a description...",
- "descriptionLabel": "Description",
- "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
- "developerLabel": "Developer",
- "developerSizeHint": "The maximum length of the developer name is 256 characters.",
- "disable": "Disable",
- "disabled": "Disabled",
- "displayNameLabel": "Name",
- "displayVersionHint": "Enter the app version",
- "displayVersionLabel": "App Version",
- "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
- "eBookCategoryNameLabel": "Default name",
- "emailAccount": "Email account name",
- "emailAccountHint": "e.g. Corporate Email",
- "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
- "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
- "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
- "emailServer": "Email Server",
- "emailServerHint": "e.g. mail.contoso.com",
- "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
- "enable": "Enable",
- "enableSMime": "Enable S/MIME",
- "enabled": "Enabled",
- "encryptAllEmails": "Encrypt all emails",
- "encryptionCertificates": "Encryption certificates",
- "endUserNotifications": "End-user notifications",
- "enrollmentTypeLabel": "Device enrollment type",
- "externalRecipients": "External recipients MailTip",
- "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
- "focusedInbox": "Focused Inbox",
- "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
- "fullScreenEnabledLabel": "Full screen",
- "gmailNineAmountOfEmail": "Amount of email to synchronize",
- "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
- "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
- "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
- "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
- "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
- "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
- "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
- "ignoreManifestScope": "Ignore manifest scope",
- "ignoreVersionDetection": "Ignore app version",
- "informationUrlLabel": "Information URL",
- "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
- "installAsManaged": "Install as managed",
- "installationSourceLabel": "App type",
- "installerTypeInfoBalloon": "The installer type of the application package.",
- "installerTypeLabel": "Installer Type",
- "isFeatured": "Show this as a featured app in the Company Portal",
- "isMAMEnabledToggleLabel": "Yes",
- "lastModifiedDateTime": "Last updated Time",
- "ldapUrl": "LDAP URL",
- "licensingType": "Supports device context assignment",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimum operating system",
- "modernAuth": "Modern authentication",
- "nameHint": "Enter a name",
- "nameLabel": "Name",
- "nameSizeHint": "The maximum length of the name is 512 characters.",
- "notConfigured": "Not configured",
- "notesLabel": "Notes",
- "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
- "notificationType": "Notification type",
- "oneDay": "One Day",
- "oneMonth": "One Month",
- "oneWeek": "One Week",
- "outlookSMimeSettings": "Outlook S/MIME settings",
- "ownerLabel": "Owner",
- "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
- "packageIdLabel": "Package Identifier",
- "packageNameLabel": "Package name",
- "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
- "platformLabel": "Platform",
- "policyDescriptionLabel": "Description",
- "policyNameLabel": "Name",
- "preComposedIconEnabled": "Precomposed",
- "primarySMTPAddress": "Primary SMTP Address",
- "privacyUrlLabel": "Privacy URL",
- "publisherHint": "Enter a publisher name",
- "publisherLabel": "Publisher",
- "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
- "require": "Require",
- "requireBiometrics": "Require Biometrics to access app",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "At least one scope tag is required",
- "searchAppLabel": "Select app",
- "searchAppLinkText": "Search the App Store",
- "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
- "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
- "selectAAD": "Select a Microsoft Entra attribute",
- "selectAppFileLabel": "Select file",
- "selectAppFileLinkText": "Select app package file",
- "selectAppFileToUpdateLabel": "Select file to update",
- "selectAuthMethod": "Select an authentication method",
- "selectAuthType": "Select an authentication type",
- "selectCatalogAppLabel": "Select app",
- "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
- "selectCertificate": "Select a certificate",
- "signAllEmails": "Sign all emails",
- "signingCertificates": "Signing certificates",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Suite Description",
- "suiteNameLabel": "Suite Name",
- "targetApplicationBundleIdentifier": "Target application bundle identifier",
- "targetedPlatformsLabel": "Targeted platform",
- "tasks": "Tasks",
- "threeDays": "Three Days",
- "totalLicenseCount": "Total licenses",
- "twoWeeks": "Two Weeks",
- "unifiedAssignmentsLabel": "Assign to:",
- "unlimited": "Unlimited",
- "urlHint": "Enter a valid url",
- "useManagedBrowserHint": "Android and iOS only. Learn more",
- "useManagedBrowserLabel": "Require a managed browser to open this link",
- "userPrinicipalName": "User Principal Name",
- "username": "Username",
- "usernameAttribute": "Username attribute from Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
- "usernamePassword": "Username and password",
- "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
- "webAppUrlLabel": "App URL",
- "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
- "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "XML Data Entered",
- "xmlFormatInvalid": "XML policy format is invalid.",
- "xmlTooLarge": "Input size must be less than 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Failed to delete {0}",
- "failureCa": "Failed to delete {0} because it is referenced by CA policies",
- "modifying": "Deleting {0}",
- "success": "Successfully deleted {0}"
- },
- "Notify": {
- "failure": "Failed to update {0}",
- "modifying": "Modifying {0}",
- "success": "Successfully updated {0}"
- },
- "menuLabel": "Authentication context"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
- "certificate": "Certificate authentication",
- "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
- "multifactor": "Multifactor authentication",
- "require": "Require federated authentication method (Preview)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
- },
- "Option": {
- "always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
- "label": "Persistent browser session",
- "never": "Never persistent"
- },
- "Warning": {
- "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Hours or days",
- "value": "Frequency"
- },
- "Option": {
- "Day": {
- "plural": "{0} days",
- "singular": "1 day"
- },
- "Hour": {
- "plural": "{0} hours",
- "singular": "1 hour"
- },
- "daysOption": "Days",
- "everytime": "Every time",
- "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
- "hoursOption": "Hours",
- "label": "Sign-in frequency",
- "placeholder": "Select units"
- }
- },
- "mainOption": "Modify session lifetime",
- "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
- },
- "SingleSelectorActive": {
- "failed": "Unable to load this data.",
- "reattempt": "Loading data. Reattempt {0} of {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Choose directory roles"
- },
- "Excluded": {
- "gridAria": "List of excluded users"
- },
- "Included": {
- "gridAria": "List of included users"
- },
- "Validation": {
- "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
- "customRoleSelected": "At least one custom role is selected",
- "failed": "\"{0}\" must be configured",
- "roles": "Select at least one role",
- "usersGroups": "Select at least one user or group"
- },
- "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
- },
- "advancedTabText": "Advanced",
- "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
- "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
- "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
- "allDayCheckboxLabel": "All day",
- "allDevicePlatforms": "Any device",
- "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
- "allGuestUserLabel": "All guest and external users",
- "allRiskLevelsOption": "All risk levels",
- "allTrustedLocationLabel": "All trusted locations",
- "allUserGroupSetSelectorLabel": "All users and groups selected",
- "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
- "allUsersString": "All users",
- "and": "{0} AND {1} ",
- "andWithGrouping": "({0}) AND {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Any cloud app",
- "appContextOptionInfoContent": "Requested authentication tag",
- "appContextOptionLabel": "Requested authentication tag (Preview)",
- "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
- "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
- "appNotSetSeletorLabel": "0 cloud apps selected",
- "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
- "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
- "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
- "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
- "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
- "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
- "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
- "applyConditonLabel": "Configure",
- "ariaLabelPolicyDisabled": "Policy is disabled",
- "ariaLabelPolicyEnabled": "Policy is enabled",
- "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
- "blockAccess": "Block access",
- "builtInDirectoryRoleLabel": "Built-in directory roles",
- "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "casInfoBubble": "This control works for various cloud apps.",
- "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "cert64DownloadCol": "Download base64 certificate",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Download certificate",
- "certDurationCol": "Expiry",
- "certDurationStartCol": "Valid from",
- "certName": "VpnCert",
- "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Choose Applications",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Chosen Applications",
- "chooseApplicationsEmpty": "No Applications",
- "chooseApplicationsNone": "None",
- "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseApplicationsPlural": "{0} and {1} more",
- "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
- "chooseApplicationsRemove": "Remove",
- "chooseApplicationsReturnedPlural": "{0} applications found",
- "chooseApplicationsReturnedSingular": "1 application found",
- "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
- "chooseApplicationsSearchHint": "Search Applications...",
- "chooseApplicationsSearchLabel": "Applications",
- "chooseApplicationsSearching": "Searching...",
- "chooseApplicationsSelect": "Select",
- "chooseApplicationsSelected": "Selected",
- "chooseApplicationsSingular": "{0} and 1 more",
- "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
- "chooseLocationCorpnetItem": "Corporate network",
- "chooseLocationSelectedLocationsLabel": "Selected locations",
- "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Choose Locations",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Chosen Locations",
- "chooseLocationsEmpty": "No Locations",
- "chooseLocationsExcludedSelectorTitle": "Select",
- "chooseLocationsIncludedSelectorTitle": "Select",
- "chooseLocationsNone": "None",
- "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseLocationsPlural": "{0} and {1} more",
- "chooseLocationsRemove": "Remove",
- "chooseLocationsReturnedPlural": "{0} locations found",
- "chooseLocationsReturnedSingular": "1 location found",
- "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
- "chooseLocationsSearchHint": "Search Locations...",
- "chooseLocationsSearchLabel": "Locations",
- "chooseLocationsSearching": "Searching...",
- "chooseLocationsSelect": "Select",
- "chooseLocationsSelected": "Selected",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
- "chooseLocationsSingular": "{0} and 1 more",
- "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
- "claimProviderAddCommandText": "New custom control",
- "claimProviderAddNewBladeTitle": "New custom control",
- "claimProviderDeleteCommand": "Delete",
- "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "claimProviderDeleteTitle": "Are you sure?",
- "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
- "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
- "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
- "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
- "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
- "claimProviderNotificationCreateTitle": "Creating '{0}'",
- "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
- "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
- "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
- "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
- "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
- "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
- "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
- "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
- "claimProviderNotificationUpdateTitle": "Updating '{0}'",
- "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
- "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
- "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
- "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
- "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
- "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
- "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
- "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
- "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
- "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
- "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
- "claimProvidersNone": "No custom controls",
- "claimProvidersSearchPlaceholder": "Search controls.",
- "classicPoilcyFilterTitle": "Show",
- "classicPolicyAllPlatforms": "All Platforms",
- "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
- "classicPolicyCloudAppTitle": "Cloud application",
- "classicPolicyControlAllow": "Allow",
- "classicPolicyControlBlock": "Block",
- "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
- "classicPolicyControlRequireCompliantDevice": "Require compliant device",
- "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
- "classicPolicyControlRequireMfa": "Require multifactor authentication",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
- "classicPolicyDeleteCommand": "Delete",
- "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
- "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
- "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
- "classicPolicyDetailBladeTitle": "Details",
- "classicPolicyDisableCommand": "Disable",
- "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
- "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
- "classicPolicyDisableFailTitle": "Failed to disable classic policy",
- "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
- "classicPolicyDisableInProgressTitle": "Disabling classic policy",
- "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
- "classicPolicyDisableSuccessTitle": "Classic policy disabled",
- "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
- "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
- "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
- "classicPolicyFilterAll": "All policies",
- "classicPolicyFilterDisabled": "Disabled policies",
- "classicPolicyFilterEnabled": "Enabled policies",
- "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
- "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
- "classicPolicyIncludedPlatformsTitle": "Included device platforms",
- "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
- "classicPolicyMigrateCommand": "Migrate",
- "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
- "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
- "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
- "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
- "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
- "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
- "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
- "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
- "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
- "classicPolicySaveFailDescription": "Failed to save '{0}'",
- "classicPolicySaveFailTitle": "Failed to save classic policy",
- "classicPolicySaveInProgressDescription": "Saving '{0}'",
- "classicPolicySaveInProgressTitle": "Saving classic policy",
- "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
- "classicPolicySaveSuccessTitle": "Classic policy saved",
- "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
- "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
- "clientAppBladeTitle": "Client apps",
- "clientAppDescription": "Select the client apps this policy will apply to",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
- "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
- "clientAppLegacyHeader": "Legacy authentication clients",
- "clientAppMobileDesktop": "Mobile apps and desktop clients",
- "clientAppModernHeader": "Modern authentication clients",
- "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
- "clientAppSelectSpecificClientApps": "Select client apps",
- "clientAppWebBrowser": "Browser",
- "clientAppsSelectedLabel": "{0} included",
- "clientTypeBrowser": "Browser",
- "clientTypeEas": "Exchange ActiveSync clients",
- "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
- "clientTypeModernAuth": "Modern authentication clients",
- "clientTypeOtherClients": "Other clients",
- "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
- "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
- "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
- "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
- "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
- "cloudappsSelectorPluralExcluded": "{0} apps excluded",
- "cloudappsSelectorPluralIncluded": "{0} apps included",
- "cloudappsSelectorSingularExcluded": "1 app excluded",
- "cloudappsSelectorSingularIncluded": "1 app included",
- "cloudappsSelectorUserPlural": "{0} apps",
- "cloudappsSelectorUserSingular": "1 app",
- "conditionLabelMulti": "{0} conditions selected",
- "conditionLabelOne": "1 condition selected",
- "conditionalAccessBladeTitle": "Conditional Access",
- "conditionsNotSelectedLabel": "Not configured",
- "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
- "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
- "configureCasText": "Configure Cloud App Security",
- "configureCustomControlsText": "Configure custom policy",
- "controlLabelMulti": "{0} controls selected",
- "controlLabelOne": "1 control selected",
- "controlValidatorText": "Please select at least one control",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
- "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
- "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
- "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
- "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
- "controlsMamInfoBubble": "Device must use these approved client applications.",
- "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
- "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
- "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
- "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
- "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
- "createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
- "customRoleLabel": "Custom roles (not supported)",
- "dateRangeTypeLabel": "Date range",
- "daysOfWeekPlaceholderText": "Filter days of the week",
- "daysOfWeekTypeLabel": "Days of the week",
- "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
- "descriptionContentForControlsAndOr": "For multiple controls",
- "devicePlatform": "Device platform",
- "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} included",
- "devicePlatformIncludeExclude": "{0} and {1} excluded",
- "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
- "devicePlatformsNone": "None",
- "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
- "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
- "deviceStateAll": "All device state",
- "deviceStateCompliant": "Device marked as compliant",
- "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
- "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
- "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
- "deviceStateConditionSelectorLabel": "Device state (deprecated)",
- "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
- "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
- "deviceStateDomainJoinedInfoLinkText": "Learn more.",
- "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
- "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
- "directoryRolesLabel": "Directory roles",
- "discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
- "duplicatePolicyName": "{0} COPY",
- "endDatePickerLabel": "Ends",
- "endTimePickerLabel": "End time",
- "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
- "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
- "enterUserText": "No user is selected. Select a user.",
- "evaluationResult": "Evaluation result",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
- "excludeAllTrustedLocationSelectorText": "all trusted locations",
- "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
- "friday": "Friday",
- "grantControls": "Grant controls",
- "gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
- "gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
- "gridPolicyName": "Policy Name",
- "gridPolicyState": "State",
- "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
- "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
- "groupSelectionBladeSelect": "Select groups",
- "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
- "groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
- "highRisk": "High",
- "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
- "includeAppsTextFormat": "Include: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
- "includeUnknownAreasCheckboxLabel": "Include unknown areas",
- "infoCommandLabel": "Info",
- "invalidCertDuration": "Invalid cert duration",
- "invalidIpAddress": "Value must be a valid IP address",
- "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
- "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Load all",
- "loading": "Loading...",
- "locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
- "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
- "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
- "locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
- "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
- "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
- "locationsSelectedPrivateLinksLabel": "Selected Private Links",
- "lowRisk": "Low",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
- "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
- "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
- "markAsTrustedCheckboxLabel": "Mark as trusted location",
- "mediumRisk": "Medium",
- "memberSelectionCommandRemove": "Remove",
- "menuItemClaimProviderControls": "Custom controls (Preview)",
- "menuItemClassicPolicies": "Classic policies",
- "menuItemInsightsAndReporting": "Insights and reporting",
- "menuItemManage": "Manage",
- "menuItemNamedLocationsPreview": "Named locations (Preview)",
- "menuItemNamedNetworks": "Named locations",
- "menuItemPolicies": "Policies",
- "menuItemTermsOfUse": "Terms of use",
- "modifiedTimeLabel": "Modified time",
- "monday": "Monday",
- "nameLabel": "Name",
- "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
- "namedLocationTypeCountry": "Countries/Regions",
- "namedLocationTypeLabel": "Define the location using:",
- "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
- "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "You need to select at least one country/region",
- "namedNetworkDeleteCommand": "Delete",
- "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
- "namedNetworkInvalidRange": "Value must be a valid IP range.",
- "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
- "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
- "namedNetworkIpRangesTab": "IP ranges",
- "namedNetworkListAdd": "New location",
- "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
- "namedNetworkNameDescription": "Example: 'Redmond office'",
- "namedNetworkNameInvalid": "The supplied name is invalid.",
- "namedNetworkNameRequired": "You must supply a name for this location.",
- "namedNetworkNoIpRanges": "No IP ranges",
- "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
- "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
- "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
- "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
- "namedNetworkNotificationCreateTitle": "Creating '{0}'",
- "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
- "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
- "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
- "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
- "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
- "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
- "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
- "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
- "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
- "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
- "namedNetworkSearchPlaceholder": "Search locations.",
- "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
- "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
- "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
- "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
- "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
- "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
- "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
- "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
- "namedNetworksAdd": "New named location",
- "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} and {1} excluded",
- "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} included",
- "namedNetworksNone": "No named locations found.",
- "namedNetworksTitle": "Configure locations",
- "namednetworkExceedingSizeErrorBladeTitle": "Error details",
- "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
- "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
- "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
- "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
- "newCertName": "new cert",
- "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
- "noPolicyRowMessage": "No policies",
- "noSPSelected": "No service principal selected",
- "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
- "noUserSelected": "No user selected",
- "noneRisk": "No risk",
- "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
- "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
- "oneUserSelected": "1 user selected",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
- "or": "{0} OR {1} ",
- "pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
- "policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
- "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
- "policyAssignmentsSection": "Assignments",
- "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
- "policyCloudAppsDisplayTextAllApp": "All apps",
- "policyCloudAppsLabel": "Cloud apps",
- "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionDevicePlatform": "Device platforms",
- "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
- "policyConditionLocation": "Locations",
- "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
- "policyConditionLocationPreview": "Locations (Preview)",
- "policyConditionSigninRisk": "Sign-in risk",
- "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
- "policyConditionUserRisk": "User risk",
- "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
- "policyConditioniClientApp": "Client apps",
- "policyControlAllowAccessDisplayedName": "Grant access",
- "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
- "policyControlBladeTitle": "Grant",
- "policyControlBlockAccessDisplayedName": "Block access",
- "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
- "policyControlContentDescription": "Control access enforcement to block or grant access.",
- "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
- "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
- "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
- "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
- "policyControlRequireMamDisplayedName": "Require approved client app",
- "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
- "policyControlSelectAuthStrength": "Require authentication strength",
- "policyControlsNoControlsSelected": "0 controls selected",
- "policyControlsSection": "Access controls",
- "policyCreatBladeTitle": "New",
- "policyCreateButton": "Create",
- "policyCreateFailedMessage": "Error: {0}",
- "policyCreateFailedTitle": "Failed to create '{0}'",
- "policyCreateInProgressTitle": "Creating '{0}'",
- "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyCreateSuccessTitle": "Successfully created '{0}'",
- "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "policyDeleteFailTitle": "Failed to delete '{0}'",
- "policyDeleteInProgressTitle": "Deleting '{0}'",
- "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
- "policyEnforceLabel": "Enable policy",
- "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
- "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
- "policyErrorUnknown": "Something went wrong, please try again later.",
- "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
- "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
- "policyNameCannotBeEmpty": "Policy name can't be empty",
- "policyNameDevice": "Device policy",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Mobile App Management policy",
- "policyNameMfaLocation": "Multifactor authentication and location policy",
- "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
- "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
- "policyOff": "Off",
- "policyOn": "On",
- "policyReportOnly": "Report-only",
- "policyReviewSection": "Review",
- "policySaveButton": "Save",
- "policyStatusIconDescription": "Policy is Enabled",
- "policyStatusIconEnabled": "Enabled status icon",
- "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
- "policyTemplateName2": "Allow {0} access only on managed devices",
- "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
- "policyTriggerRiskSpecific": "Select specific risk level",
- "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
- "policyTriggersNoConditionsSelected": "0 conditions selected",
- "policyTriggersSelectorLabel": "Conditions",
- "policyUpdateFailedMessage": "Error: {0}",
- "policyUpdateFailedTitle": "Failed to update {0}",
- "policyUpdateInProgressTitle": "Updating {0}",
- "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyUpdateSuccessTitle": "Successfully updated {0}",
- "primaryCol": "Primary",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
- "requireAllControlsText": "Require all the selected controls",
- "requireCompliantDevice": "Require compliant device",
- "requireDomainJoined": "Require domain-joined device",
- "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
- "requireMFA": "Require multifactor authentication",
- "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
- "requireOneControlText": "Require one of the selected controls",
- "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
- "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
- "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
- "resetFilters": "Reset filters",
- "sPRequired": "Service principal required",
- "sPSelectorInfoBalloon": "User or Service Principal you want to test",
- "saturday": "Saturday",
- "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
- "securityDefaultsPolicyName": "Security defaults",
- "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
- "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
- "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
- "selectDevicePlatforms": "Select device platforms",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Select locations",
- "selectedSP": "Selected Service Principal",
- "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
- "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
- "servicePrincipalDataGridAria": "List of available service principals",
- "servicePrincipalDropDownLabel": "What does this policy apply to?",
- "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
- "servicePrincipalSelectionsAria": "Selected service principals grid",
- "servicePrincipalSelectorAria": "List of chosen service principals",
- "servicePrincipalSelectorMultiple": "{0} service principals selected",
- "servicePrincipalSelectorSingle": "1 service principal selected",
- "servicePrincipalSpecificExc": "Specific service principals excluded",
- "servicePrincipalSpecificInc": "Specific service principals included",
- "servicePrincipals": "Service principals",
- "sessionControlBladeTitle": "Session",
- "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
- "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
- "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
- "sessionControls": "Session controls",
- "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
- "sessionControlsCasLabel": "Use Conditional Access App Control",
- "sessionControlsSecureSignInLabel": "Require token binding",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} included",
- "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
- "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
- "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
- "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
- "specificUsersExcluded": "specific users excluded",
- "specificUsersIncluded": "Specific users included",
- "specificUsersIncludedAndExcluded": "Specific users excluded and included",
- "startDatePickerLabel": "Starts",
- "startFreeTrial": "Start a free trial",
- "startTimePickerLabel": "Start time",
- "sunday": "Sunday",
- "testButton": "What If",
- "thumbprintCol": "Thumbprint",
- "thursday": "Thursday",
- "timeConditionAllTimesLabel": "Any time",
- "timeConditionIntroText": "Configure the time this policy will apply to",
- "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
- "timeConditionSelectorLabel": "Time (Preview)",
- "timeConditionSpecificLabel": "Specific times",
- "timeSelectorAllTimesText": "Any time",
- "timeSelectorSpecificTimesText": "Specific times configured",
- "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
- "timeZoneDropdownLabel": "Time zone",
- "timeZoneDropdownPlaceholderText": "Select a time zone",
- "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
- "tooManyPoliciesTitle": "More than 50 policies found",
- "trustedLocationStatusIconDescription": "Location is trusted",
- "trustedLocationStatusIconEnabled": "Trusted status icon",
- "tuesday": "Tuesday",
- "uploadInBadState": "Unable to upload the specified file.",
- "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
- "upsellAppsTitle": "Secure applications",
- "upsellBannerText": "Get a free Premium trial to use this feature",
- "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
- "upsellDataTitle": "Secure data",
- "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
- "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
- "upsellRiskTitle": "Protect against risk",
- "upsellTitle": "Conditional Access",
- "upsellWhyTitle": "Why use Conditional Access?",
- "userAppNoneOption": "None",
- "userNamePlaceholderText": "Enter User Name",
- "userNotSetSeletorLabel": "0 users and groups selected",
- "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
- "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
- "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
- "userOrSPSelectionBladeTitle": "Users or workload identities",
- "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
- "userRequired": "User Required",
- "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
- "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
- "userSPRequired": "User or Service principal required",
- "userSPSelectorTitle": "User or Workload identity",
- "userSelectionBladeAllUsersAndGroups": "All users and groups",
- "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
- "userSelectionBladeExcludeTabTitle": "Exclude",
- "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
- "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
- "userSelectionBladeIncludeTabTitle": "Include",
- "userSelectionBladeIncludedSelectorTitle": "Select",
- "userSelectionBladeSelectUsers": "Select users",
- "userSelectionBladeSelectedUsers": "Select users and groups",
- "userSelectionBladeTitle": "Users and groups",
- "userSelectorBladeTitle": "Users",
- "userSelectorExcluded": "{0} excluded",
- "userSelectorGroupPlural": "{0} groups",
- "userSelectorGroupSingular": "1 group",
- "userSelectorIncluded": "{0} included",
- "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
- "userSelectorSelected": "{0} selected",
- "userSelectorTitle": "User",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} users",
- "userSelectorUserSingular": "1 user",
- "userSelectorWithExclusion": "{0} and {1}",
- "usersGroupsLabel": "Users and groups",
- "viewApprovedAppsText": "See list of approved client apps",
- "viewCompliantAppsText": "See list of policy protected client apps",
- "viewPolicyInformation": "View policy information",
- "vpnBladeTitle": "VPN connectivity",
- "vpnCertCreateFailedMessage": "Error: {0}",
- "vpnCertCreateFailedTitle": "Failed to create {0}",
- "vpnCertCreateInProgressTitle": "Creating {0}",
- "vpnCertCreateSuccessMessage": "Successfully created {0}.",
- "vpnCertCreateSuccessTitle": "Successfully created {0}",
- "vpnCertNoRowsMessage": "No VPN certificates found",
- "vpnCertUpdateFailedMessage": "Error: {0}",
- "vpnCertUpdateFailedTitle": "Failed to update {0}",
- "vpnCertUpdateInProgressTitle": "Updating {0}",
- "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
- "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
- "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
- "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
- "vpnMenuText": "VPN connectivity",
- "vpncertDropdownDefaultOption": "Duration",
- "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
- "vpncertDropdownLabel": "Select duration",
- "vpncertDropdownOneyearOption": "1 year",
- "vpncertDropdownThreeyearOption": "3 years",
- "vpncertDropdownTwoyearOption": "2 years",
- "wednesday": "Wednesday",
- "whatIfCountry": "Country/Region",
- "whatIfCountryInfo": "The country/region the user is signing in from.",
- "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
- "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
- "whatIfIpAddress": "IP address",
- "whatIfIpAddressInfo": "IP address the user is signing in from.",
- "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
- "whatIfSelectCountry": "Select country/region...",
- "whatIfSelectDevicePlatform": "Select device platform...",
- "whatIfSelectPrivateLink": "Select private link...",
- "whatIfSelectSignInRisk": "Select sign-in risk...",
- "whatIfSignInRisk": "Sign-in risk",
- "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
- "whatIfUnknownAreas": "Unknown Areas",
- "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Workload identities (preview)",
- "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
- "workloadIdentity": "Workload identity"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Not supported",
- "supportEnding": "Support ending",
- "supported": "Supported"
- }
- },
- "SecurityTemplate": {
- "aSR": "Attack surface reduction",
- "accountProtection": "Account protection",
- "allDevices": "All devices",
- "antivirus": "Antivirus",
- "antivirusReporting": "Antivirus Reporting (Preview)",
- "conditionalAccess": "Conditional access",
- "deviceCompliance": "Device compliance",
- "diskEncryption": "Disk encryption",
- "eDR": "Endpoint detection and response",
- "ePM": "Endpoint Privilege Management",
- "firewall": "Firewall",
- "helpSupport": "Help and support",
- "setup": "Setup",
- "wdapt": "Microsoft Defender for Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Failed",
- "hardReboot": "Hard reboot",
- "retry": "Retry",
- "softReboot": "Soft reboot",
- "success": "Success"
- },
- "Columns": {
- "codeType": "Code type",
- "returnCode": "Return code"
- },
- "bladeTitle": "Return codes",
- "gridAriaLabel": "Return codes",
- "header": "Specify return codes to indicate post-installation behavior:",
- "onAddAnnounceMessage": "Return code added item {0} of {1}",
- "onDeleteSuccess": "Return code {0} deleted successfully",
- "returnCodeAlreadyUsedValidation": "Return code is already used.",
- "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
- "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
- "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
- "selectorLabel": "Return codes"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabic",
- "bulgarian": "Bulgarian",
- "chineseSimplified": "Chinese (Simplified)",
- "chineseTraditional": "Chinese (Traditional)",
- "croatian": "Croatian",
- "czech": "Czech",
- "danish": "Danish",
- "dutch": "Dutch",
- "englishUK": "English (United Kingdom)",
- "englishUS": "English (United States)",
- "estonian": "Estonian",
- "finnish": "Finnish",
- "frenchCanada": "French (Canada)",
- "frenchFrance": "French (France)",
- "german": "German",
- "greek": "Greek",
- "hebrew": "Hebrew",
- "hungarian": "Hungarian",
- "italian": "Italian",
- "japanese": "Japanese",
- "korean": "Korean",
- "latvian": "Latvian",
- "lithuanian": "Lithuanian",
- "norwegian": "Norwegian, Bokmål",
- "polish": "Polish",
- "portugueseBrazil": "Portuguese (Brazil)",
- "portuguesePortugal": "Portuguese (Portugal)",
- "romanian": "Romanian",
- "russian": "Russian",
- "serbian": "Serbian",
- "slovak": "Slovak",
- "slovenian": "Slovenian",
- "spanishMexico": "Spanish (Mexico)",
- "spanishSpain": "Spanish (Spain)",
- "swedish": "Swedish",
- "thai": "Thailand",
- "turkish": "Turkish",
- "ukrainian": "Ukrainian"
- },
- "Summary": {
- "placeholder": "Select a notification message from the left to preview contents."
- },
- "companyContact": "Show contact information",
- "companyLogo": "Show company logo",
- "companyName": "Show company name",
- "createEditDescription": "Create or edit notification message templates.",
- "createMessage": "Create message",
- "deviceDetails": "Show device details",
- "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
- "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
- "editMessage": "Edit message",
- "email": "email",
- "emailFooterTitle": "Email Footer",
- "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
- "emailHeaderTitle": "Email Header",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Configure Customization settings",
- "formSubTitle": "Create or modify notification emails",
- "headerFooterSettingsTab": "Header and footer settings",
- "imgPreview": "Image Preview",
- "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
- "iwLink": "Show company portal website link",
- "listEmpty": "No message templates.",
- "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "listSubTitle": "List of notification message templates",
- "listTitle": "Notification message templates",
- "localizedNotificationMessageTemplates": "Localized notification message templates",
- "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
- "messageCapitalized": "Notification message template",
- "messageLowercase": "notification message template",
- "missingDefaultError": "Select a default template",
- "notificationMessageTemplates": "Notification message templates",
- "rowValidationError": "At least one message template is required",
- "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "tenantValueText": "Tenant Value",
- "testEmailLabel": "Send preview email",
- "localeLabel": "Locale",
- "isDefaultLocale": "Is Default"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Number of days to wait before restart is enforced"
- },
"Description": {
"label": "Description"
},
+ "FeatureDeploymentSettings": {
+ "header": "Feature deployment settings"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "This feature cannot downgrade a device.",
+ "label": "Feature update to deploy"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Final group availability"
+ },
+ "GradualRolloutInterval": {
+ "label": "Days between groups"
+ },
+ "GradualRolloutStartDate": {
+ "label": "First group availability"
+ },
"Name": {
"label": "Name"
},
- "QualityUpdateRelease": {
- "label": "Expedite installation of quality updates if device OS version less than:"
- },
- "bladeTitle": "Quality updates Windows 10 and later (preview)",
- "loadError": "Loading failed!"
+ "OptionalUpdate": {
+ "label": "Required or optional update"
+ },
+ "RolloutOptions": {
+ "label": "Rollout options"
+ },
+ "RolloutSettings": {
+ "header": "When would you like to make the update available in Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Configure scope tags for this policy."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "First available date"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Disabled",
+ "enabled": "Enabled",
+ "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
+ "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
+ "notApplicable": "Not Applicable",
+ "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
+ },
+ "bladeTitle": "Feature update deployments",
+ "deploymentSettingsTitle": "Deployment settings",
+ "loadError": "Loading failed!",
+ "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\" has been saved.",
+ "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
+ },
"TabName": {
- "qualityUpdateSettings": "Settings"
+ "deploymentSettings": "Deployment settings",
+ "groupAssignmentSettings": "Assignments",
+ "scopeSettings": "Scope tags"
},
- "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
- "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
- "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
- "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
+ "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
+ "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
+ "profileNameWarning": "Name should be less than 64 characters",
+ "specificLicensingRequired": "Some selected capabilities require specific licensing."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64-bit",
- "thirtyTwoBit": "32-bit"
- },
- "TACSettings": {
- "edgeSettings": "Edge configuration settings",
- "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
- "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
- "generalAppConfig": "General app configuration",
- "generalSettings": "General configuration settings",
- "outlookSMIMEConfig": "Outlook S/MIME settings",
- "outlookSettings": "Outlook configuration settings",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Add network boundary",
- "addNetworkBoundaryButton": "Add network boundary...",
- "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
- "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
- "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
- "boundaryType": "Boundary type",
- "cloudResources": "Cloud resources",
- "corporateIdentity": "Corporate identity",
- "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
- "editNetworkBoundary": "Edit network boundary",
- "enrollmentState": "Enrollment state",
- "iPv4Ranges": "IPv4 ranges",
- "iPv6Ranges": "IPv6 ranges",
- "internalProxyServers": "Internal proxy servers",
- "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
- "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
- "mdmDiscoveryUrl": "MDM discovery URL",
- "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
- "minimumPinLength": "Set the minimum number of characters required for the PIN",
- "name": "Name",
- "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
- "networkBoundary": "Network boundary",
- "networkDomainNames": "Network domains",
- "neutralResources": "Neutral resources",
- "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
- "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
- "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
- "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
- "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
- "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
- "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
- "protectedDomainNames": "Protected domains",
- "proxyServers": "Proxy servers",
- "requireAppPin": "Disable app PIN when device PIN is managed",
- "requiredSettings": "Required settings",
- "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
- "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
- "revokeOnUnenroll": "Revoke encryption keys on unenroll",
- "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
- "showWipIcon": "Show the enterprise data protection icon",
- "type": "Type",
- "useRmsForWip": "Use Azure RMS for WIP",
- "value": "Value",
- "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
- "wipProtectionMode": "Windows Information Protection mode",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
+ "Platform": {
+ "all": "All",
+ "android": "Android device administrator",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android enterprise",
+ "common": "Common",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS and Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "windows": "Windows",
+ "windows10": "Windows 10 and later",
+ "windows10CM": "Windows 10 and later (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 and later",
+ "windows8And10": "Windows 8 and 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 and later",
+ "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows PC"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filter",
+ "noFilters": "None"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Author",
- "template": "Template name"
- },
- "Row": {
- "ariaLabel": "row {0} of {1} column {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
- },
- "SettingsCatalog": {
- "subtitle": "Start from scratch and select settings you want from the library of available settings",
- "title": "Settings catalog"
- },
- "Templates": {
- "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
- "title": "Templates"
- },
- "noData": "No policy templates found"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop Client",
- "visioProRetail": "Visio Online Plan 2"
- },
- "Countries": {
- "ae": "United Arab Emirates",
- "ag": "Antigua and Barbuda",
- "ai": "Anguilla",
- "al": "Albania",
- "am": "Armenia",
- "ao": "Angola",
- "ar": "Argentina",
- "at": "Austria",
- "au": "Australia",
- "az": "Azerbaijan",
- "bb": "Barbados",
- "be": "Belgium",
- "bf": "Burkina Faso",
- "bg": "Bulgaria",
- "bh": "Bahrain",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolivia",
- "br": "Brazil",
- "bs": "Bahamas",
- "bt": "Bhutan",
- "bw": "Botswana",
- "by": "Belarus",
- "bz": "Belize",
- "ca": "Canada",
- "cg": "Republic Of Congo",
- "ch": "Switzerland",
- "cl": "Chile",
- "cn": "China",
- "co": "Colombia",
- "cr": "Costa Rica",
- "cv": "Cape Verde",
- "cy": "Cyprus",
- "cz": "Czech Republic",
- "de": "Germany",
- "dk": "Denmark",
- "dm": "Dominica",
- "do": "Dominican Republic",
- "dz": "Algeria",
- "ec": "Ecuador",
- "ee": "Estonia",
- "eg": "Egypt",
- "es": "Spain",
- "fi": "Finland",
- "fj": "Fiji",
- "fm": "Federated States Of Micronesia",
- "fr": "France",
- "gb": "United Kingdom",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Greece",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hong Kong",
- "hn": "Honduras",
- "hr": "Croatia",
- "hu": "Hungary",
- "id": "Indonesia",
- "ie": "Ireland",
- "il": "Israel",
- "in": "India",
- "is": "Iceland",
- "it": "Italy",
- "jm": "Jamaica",
- "jo": "Jordan",
- "jp": "Japan",
- "ke": "Kenya",
- "kg": "Kyrgyzstan",
- "kh": "Cambodia",
- "kn": "St. Kitts and Nevis",
- "kr": "Republic Of Korea",
- "kw": "Kuwait",
- "ky": "Cayman Islands",
- "kz": "Kazakstan",
- "la": "Lao People’s Democratic Republic",
- "lb": "Lebanon",
- "lc": "St. Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Lithuania",
- "lu": "Luxembourg",
- "lv": "Latvia",
- "md": "Republic Of Moldova",
- "mg": "Madagascar",
- "mk": "North Macedonia",
- "ml": "Mali",
- "mn": "Mongolia",
- "mo": "Macau",
- "mr": "Mauritania",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Mexico",
- "my": "Malaysia",
- "mz": "Mozambique",
- "na": "Namibia",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Netherlands",
- "no": "Norway",
- "np": "Nepal",
- "nz": "New Zealand",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua New Guinea",
- "ph": "Philippines",
- "pk": "Pakistan",
- "pl": "Poland",
- "pt": "Portugal",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Romania",
- "ru": "Russia",
- "sa": "Saudi Arabia",
- "sb": "Solomon Islands",
- "sc": "Seychelles",
- "se": "Sweden",
- "sg": "Singapore",
- "si": "Slovenia",
- "sk": "Slovakia",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Suriname",
- "st": "Sao Tome and Principe",
- "sv": "El Salvador",
- "sz": "Swaziland",
- "tc": "Turks and Caicos",
- "td": "Chad",
- "th": "Thailand",
- "tj": "Tajikistan",
- "tm": "Turkmenistan",
- "tn": "Tunisia",
- "tr": "Turkey",
- "tt": "Trinidad and Tobago",
- "tw": "Taiwan",
- "tz": "Tanzania",
- "ua": "Ukraine",
- "ug": "Uganda",
- "us": "United States",
- "uy": "Uruguay",
- "uz": "Uzbekistan",
- "vc": "St. Vincent and The Grenadines",
- "ve": "Venezuela",
- "vg": "British Virgin Islands",
- "vn": "Vietnam",
- "ye": "Yemen",
- "za": "South Africa",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Current Channel",
- "deferred": "Semi-Annual Enterprise Channel",
- "firstReleaseCurrent": "Current Channel (Preview)",
- "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
- "monthlyEnterprise": "Monthly Enterprise Channel",
- "placeHolder": "Select one"
- },
- "AppProtection": {
- "allAppTypes": "Target to all app types",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Apps in Android Work Profile",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
- "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
- "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
- "appsOnUnmanagedDevices": "Apps on unmanaged devices",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Not Available",
- "windows10PlatformLabel": "Windows 10 and later",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Built-in Role",
- "customCloudPCRole": "Custom Windows 365 role",
- "customIntuneRole": "Custom Intune role",
- "customRole": "Custom Role"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "header": "Are you sure you want to delete this restriction?"
- },
- "DeviceLimit": {
- "description": "Specify the maximum number of devices a user can enroll.",
- "header": "Device limit restrictions",
- "info": "Define how many devices each user can enroll."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Must be 1.0 or greater.",
- "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
- "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
- "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
- "min": "Minimum cannot be lower than {0}",
- "minMax": "Minimum version cannot be greater than maximum version.",
- "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
- "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
- },
- "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
- "blockManufacturerPlaceHolder": "Manufacturer name",
- "blockManufacturersHeader": "Blocked manufacturers",
- "cannotRestrict": "Restriction not supported",
- "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
- "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
- "configurations": "Configure platforms",
- "deviceManufacturer": "Device manufacturer",
- "header": "Device type restrictions",
- "info": "Define which platforms, versions, and management types can enroll.",
- "manufacturer": "Manufacturer",
- "max": "Max",
- "maxVersion": "Maximum version",
- "min": "Min",
- "minVersion": "Minimum version",
- "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
- "personal": "Personally owned",
- "platform": "Platform",
- "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
- "platformSettings": "Platform settings",
- "platforms": "Select platforms",
- "platformsSelected": "{0} platforms selected",
- "type": "Type",
- "versions": "versions",
- "versionsRange": "Allow min/max range:",
- "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
- },
- "Priority": {
- "saved": "Restriction Priorities were successfully saved."
- },
- "Row": {
- "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
- },
- "Table": {
- "deployed": "Deployed",
- "name": "Name",
- "priority": "Priority"
- },
- "Type": {
- "limit": "Device limit restriction",
- "type": "Device type restriction"
- },
- "allUsers": "All Users",
- "androidRestrictions": "Android restrictions",
- "create": "Create restriction",
- "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
- "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
- "deleteTitle": "Are you sure you want to delete {0} restriction?",
- "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
- "edit": "Edit restriction",
- "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
- "iosRestrictions": "iOS restrictions",
- "mDM": "MDM",
- "macRestrictions": "macOS restrictions",
- "maxVersion": "Max Version",
- "minVersion": "Min Version",
- "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
- "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
- "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
- "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
- "notFound": "Restriction not found. It may have already been deleted.",
- "personallyOwned": "Personally owned devices",
- "restriction": "Restriction",
- "restrictionLowerCase": "restriction",
- "restrictionType": "Restriction type",
- "selectType": "Select restriction type",
- "selectValidation": "Please select a platform",
- "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
- "typeRequired": "Restriction type is required.",
- "winPhoneRestrictions": "Windows Phone restrictions",
- "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
- "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
- "windowsRestrictions": "Windows restrictions",
- "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
- },
- "InstallContextType": {
- "device": "Device",
- "deviceContext": "Device context",
- "user": "User",
- "userContext": "User context"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Description",
- "placeholder": "Enter a description"
- },
- "NameTextBox": {
- "label": "Name",
- "placeholder": "Enter a name"
- },
- "PublisherTextBox": {
- "label": "Publisher",
- "placeholder": "Enter a publisher"
- },
- "VersionTextBox": {
- "label": "Version"
- },
- "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
- },
- "ScopeTags": {
- "headerDescription": "Select one or more groups to assign the script package."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Detection script",
- "placeholder": "Input script text",
- "requiredValidationMessage": "Please enter the detection script"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Enforce script signature check"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Run this script using the logged-on credentials"
- },
- "RemediationScript": {
- "infoBox": "This script will run in detect-only mode because there is no remediation script."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Remediation script",
- "placeholder": "Input script text"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Run script in 64-bit PowerShell"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
- },
- "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
- "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
- },
- "title": "Create custom script",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Interval",
- "time": "Date and time"
- },
- "Interval": {
- "day": "Repeats every day",
- "days": "Repeats every {0} days",
- "hour": "Repeats every hour",
- "hours": "Repeats every {0} hours",
- "month": "Repeats every month",
- "months": "Repeats every {0} months",
- "week": "Repeats every week",
- "weeks": "Repeats every {0} weeks"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) on {1}",
- "withDate": "{0} on {1}"
- }
- }
- },
- "Edit": {
- "title": "Edit - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Allowed URLs",
- "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "ApplicationProxyRedirection": {
- "header": "Application proxy",
- "title": "Application proxy redirection",
- "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
- },
- "BlockedURLs": {
- "title": "Blocked URLs",
- "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "Bookmarks": {
- "header": "Managed bookmarks",
- "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Managed homepage",
- "title": "Homepage shortcut URL",
- "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Redirect restricted sites to personal context",
- "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
- }
- },
- "BooleanActions": {
- "allow": "Allow",
- "block": "Block",
- "configured": "Configured",
- "disable": "Disable",
- "dontRequire": "Don't Require",
- "enable": "Enable",
- "hide": "Hide",
- "limit": "Limit",
- "notConfigured": "Not configured",
- "require": "Require",
- "show": "Show",
- "yes": "Yes"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Make available to users as an optional update",
- "optionalValue": "Optional",
- "required": "Make available to users as a required update",
- "requiredValue": "Required"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 day",
- "twoDays": "2 days",
- "zeroDays": "0 days"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Overview"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load iOS software update profiles"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS update profile",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profile"
- },
- "listLoadError": "Unable to load iOS software update profiles, try again later",
- "lowercase": "iOS update policy",
- "uppercase": "iOS Update policy"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
- "latestUpdate": "Latest update",
- "noLongerSupported": "Selected version is no longer supported",
- "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
- "prefix": "Install iOS/iPadOS",
- "selectSupported": "Select update version supported by Apple",
- "updateToInstall": "Update to install"
- },
- "Schedule": {
- "always": "Update at next check-in",
- "duringTimeWindows": "Update during scheduled time",
- "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
- "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
- "label": "Schedule type",
- "outsideActiveHours": "Update outside of active hours (legacy)",
- "outsideTimeWindows": "Update outside of scheduled time",
- "timeWindow": "Time window",
- "timeZone": "Time zone",
- "title": "Update policy schedule settings:",
- "weekly": "Weekly schedule",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
- "label": "Select version to install"
- },
- "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
- "notAvailable": "N/A"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "There are no iOS update policies to display",
- "macOsUpdates": "There are no macOS software update policies to display",
- "windowsUpdates": "There are no update rings for Windows 10 and later to show."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Device name",
- "deviceUpdateStatus": "Device update status",
- "lastUpdated": "Last updated",
- "osVersion": "OS version",
- "userPrincipalName": "User name"
- },
- "maximumOSVersionFilter": "Maximum OS version",
- "minimumOSVersionFilter": "Minimum OS version",
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by device name, user name or OS version",
- "title": "Account summary for macOS devices"
- },
- "Category": {
- "configurationDataFile": "Configuration data file",
- "critical": "Critical",
- "firmware": "Firmware",
- "other": "Other"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "successfulUpdateCount": "Successful updates deployed",
- "totalUpdateCount": "Total updates deployed",
- "updateCategory": "Update category",
- "updateCategoryStatus": "Update category status"
- },
- "noData": "No data to display"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load macOS software update profiles"
- }
- },
- "State": {
- "available": "Available",
- "commandFailed": "Command failed",
- "downloadFailed": "Download failed",
- "downloadInsufficientNetwork": "Download insufficient network",
- "downloadInsufficientPower": "Download insufficient power",
- "downloadInsufficientSpace": "Download insufficient space",
- "downloaded": "Downloaded",
- "downloading": "Downloading",
- "idle": "Idle",
- "installFailed": "Install failed",
- "installInsufficientPower": "Install insufficient power",
- "installInsufficientSpace": "Install insufficient space",
- "installing": "Installing",
- "scheduled": "Scheduled",
- "success": "Success",
- "unknown": "Unknown"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "updateName": "Update name",
- "updateStatus": "Update status",
- "version": "Version"
- },
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by update name or version"
- },
- "SummaryBlade": {
- "subtitle": "macOS update profile",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profile"
- },
- "error": "Error",
- "errorOrErrors": "Error(s)",
- "errors": "Errors",
- "listLoadError": "Unable to load macOS software update profiles, try again later",
- "lowercase": "macOs update policy",
- "other": "Other",
- "subtitle": "MacOS software update",
- "upToDate": "Up to date",
- "uppercase": "macOS Update Policy"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Please try again later",
- "title": "Failed to delete {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Please try again later"
- },
- "LoadConfigurationFailed": {
- "description": "Please try again later",
- "title": "Failed to load {0}"
- },
- "idWrongFormat": "The provided id for the profile is not in the expected format."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "At least one time window should be selected",
- "tooMany": "A maximum of 20 time windows can be configured"
- }
- },
- "endDay": "End day",
- "endTime": "End time",
- "startDay": "Start day",
- "startTime": "Start time",
- "timeWindowError": "Choose a window of time that spans at least one hour."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load update ring profiles for Windows 10 and later."
- }
- },
- "SummaryBlade": {
- "subtitle": "Update ring for Windows 10 and later",
- "title": "Windows Update for Business"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 and later",
- "title": "Update ring for Windows 10 and later"
- },
- "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
- "lowercase": "Update ring",
- "uppercase": "Update Ring"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Update policy settings",
- "updateRingSettings": "Update ring settings"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Create {0}",
- "edit": "Edit {0}"
- }
- },
- "notScannedYet": "Not scanned yet",
- "outOfDateIosDevices": "Out of date iOS devices"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Device restrictions (device owner)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS Update policy"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Equals",
+ "greaterThan": "Greater than",
+ "greaterThanOrEqualTo": "Greater than or equal to",
+ "lessThan": "Less than",
+ "lessThanOrEqualTo": "Less than or equal to",
+ "notEqualTo": "Not equal to"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Enforce script signature check and run script silently",
+ "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
+ "header": "Use a custom detection script",
+ "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
+ "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileNotSelectedValidation": "No script file is selected.",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
+ "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Date created",
+ "dateModified": "Date modified",
+ "doesNotExist": "File or folder does not exist",
+ "fileOrFolderExists": "File or folder exists",
+ "sizeInMB": "Size in MB",
+ "version": "String (version)"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "fileOrFolder": "File or folder",
+ "fileOrFolderToolTip": "The file or folder to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "path": "Path",
+ "pathTooltip": "The full path of the folder containing the file or folder to detect.",
+ "value": "Value",
+ "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
+ },
+ "GridColumns": {
+ "pathOrCode": "Path/Code",
+ "type": "Type"
+ },
+ "MsiRule": {
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
+ "productCode": "MSI product code",
+ "productCodeTooltip": "A valid MSI product code for the app.",
+ "productVersion": "Value",
+ "productVersionCheck": "MSI product version check",
+ "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
+ "productVersionTooltip": "Enter the MSI product version for the app."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Integer comparison",
+ "keyDoesNotExist": "Key does not exist",
+ "keyExists": "Key exists",
+ "stringComparison": "String comparison",
+ "valueDoesNotExist": "Value does not exist",
+ "valueExists": "Value exists",
+ "versionComparison": "Version comparison"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "value": "Value",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the registry value to detect.",
+ "valueTooltip": "Select a value that matches the selected detection method."
+ },
+ "RuleTypeOptions": {
+ "file": "File",
+ "mSI": "MSI",
+ "registry": "Registry"
+ },
+ "gridAriaLabel": "Detection Rules",
+ "header": "Create a rule that indicates the presence of the app.",
+ "noRulesSelectedPlaceholder": "No rules are specified.",
+ "ruleTableLimit": "You can add up to 25 detection rules",
+ "ruleType": "Rule type",
+ "ruleTypeTooltip": "Choose the type of detection rule to add."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Use a custom detection script",
+ "manual": "Manually configure detection rules"
+ },
+ "bladeTitle": "Detection rules",
+ "header": "Configure app specific rules used to detect the presence of the app.",
+ "rulesFormat": "Rules format",
+ "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
+ "selectorLabel": "Detection rules"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Accept the Microsoft Software License Terms on behalf of users",
"appSuiteConfigurationLabel": "App suite configuration",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} language(s) selected",
"xmlConfigurationLabel": "XML Configuration"
},
- "Filters": {
- "ruleSyntax": "Rule syntax",
- "filters": "Filters"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Allow user to change setting",
- "tooltip": "Specify if the user is allowed to change the setting."
- },
- "AllowWorkAccounts": {
- "title": "Allow only work or school accounts",
- "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
- },
- "BlockExternalImages": {
- "title": "Block external images",
- "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
- },
- "ConfigureEmail": {
- "title": "Configure email account settings"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
- "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
- },
- "title": "Default app signature"
- },
- "OfficeFeedReplies": {
- "title": "Discover Feed",
- "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
- },
- "OrganizeMailByThread": {
- "title": "Organize mail by thread",
- "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
- },
- "PlayMyEmails": {
- "title": "Play My Emails",
- "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
- },
- "SuggestedReplies": {
- "title": "Suggested replies",
- "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
- },
- "SyncCalendars": {
- "title": "Sync Calendars",
- "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
- },
- "TextPredictions": {
- "title": "Text Predictions",
- "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
- },
- "ThemesEnabled": {
- "title": "Themes enabled",
- "tooltip": "Specify if the user is allowed to use a custom visual theme."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS devices"
- },
- "ManagedDesktop": {
- "adminContacts": "Admin contacts",
- "appPackaging": "App packaging",
- "autopatchGroups": "Autopatch groups",
- "devices": "Devices",
- "featureEnablement": "Feature activate",
- "feedback": "Feedback",
- "gettingStarted": "Getting started",
- "messages": "Messages",
- "onlineResources": "Online resources",
- "policyHealth": "Policy health",
- "policyHealthPreview": "Policy health (preview)",
- "releaseManagement": "Release management",
- "serviceRequests": "Service requests",
- "settings": "Settings",
- "supportRequests": "Support requests",
- "tenantEnrollment": "Tenant enrollment",
- "tenantManagement": "Tenant management"
- },
- "actions": "Actions for Non-Compliance",
- "advancedExchangeSettings": "Exchange online settings",
- "advancedThreatProtection": "Microsoft Defender for Endpoint",
- "allApps": "All apps",
- "allDevices": "All devices",
- "androidFotaDeployments": "Android FOTA deployments",
- "appBundles": "App Bundles",
- "appCategories": "App categories",
- "appConfigPolicies": "App configuration policies",
- "appConfigurationStatus": "App Configuration Status",
- "appInstallStatus": "App install status",
- "appLicences": "App licenses",
- "appProtectionPolicies": "App protection policies",
- "appProtectionStatus": "App Protection status",
- "appSelectiveWipe": "App selective wipe",
- "appleVppTokens": "Apple VPP Tokens",
- "apps": "Apps",
- "assign": "Assignments",
- "assignedPermissions": "Assigned permissions",
- "assignedRoles": "Assigned roles",
- "autopilotDeploymentReport": "Autopilot deployments (preview)",
- "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
- "brandingAndCustomization": "Customization",
- "cartProfiles": "Cart profiles",
- "certificateConnectors": "Certificate connectors",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Cloud attached devices (preview)",
- "cloudPcActions": "Cloud PC actions (preview)",
- "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
- "compliancePolicies": "Compliance policies",
- "complianceScriptManagement": "Scripts",
- "complianceScriptManagementPreview": "Scripts (preview)",
- "complianceSettings": "Compliance policy settings",
- "conditionStatements": "Condition statements",
- "conditions": "Locations",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Configuration profiles",
- "configurationScripts": "Configuration Scripts",
- "connectorsAndTokens": "Connectors and tokens",
- "corporateDeviceIdentifiers": "Corporate device identifiers",
- "customAttributes": "Custom attributes",
- "customNotifications": "Custom notifications",
- "deploymentSettings": "Deployment settings",
- "derivedCredentials": "Derived Credentials",
- "deviceActions": "Device actions",
- "deviceCategories": "Device categories",
- "deviceCleanUp": "Device clean-up rules",
- "deviceEnrollmentManagers": "Device enrollment managers",
- "deviceExecutionStatus": "Device status",
- "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
- "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
- "devices": "Devices",
- "discoveredApps": "Discovered apps",
- "edgePolicies": "Policies for Microsoft Edge",
- "embeddedSIM": "eSIM cellular profiles (preview)",
- "enrollDevices": "Enroll devices",
- "enrollmentFailures": "Enrollment failures",
- "enrollmentNotifications": "Enrollment notifications (preview)",
- "enrollmentRestrictions": "Enrollment restrictions",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange service connectors",
- "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
- "failuresForDriverUpdates": "Windows Driver update failures",
- "failuresForFeatureUpdates": "Feature update failures",
- "failuresForQualityUpdates": "Windows Expedited update failures",
- "featureFlighting": "Feature flighting",
- "featureUpdateDeployments": "Feature updates for Windows 10 and later",
- "flighting": "Flighting",
- "fotaUpdate": "Firmware over-the-air update",
- "groupPolicy": "Administrative Templates",
- "groupPolicyAnalytics": "Group policy analytics",
- "helpSupport": "Help and support",
- "helpSupportReplacement": "Help and support ({0})",
- "iOSAppProvisioning": "iOS app provisioning profiles",
- "incompleteUserEnrollments": "Incomplete user enrollments",
- "iosUpdates": "Update policies for iOS/iPadOS",
- "legacyPcManagement": "Legacy PC management",
- "macOSSoftwareUpdate": "Update policies for macOS",
- "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
- "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
- "macOSSoftwareUpdateStateSummaries": "updates",
- "managedGooglePlay": "Managed Google Play",
- "msfb": "Microsoft Store for Business",
- "myPermissions": "My permissions",
- "notifications": "Notifications",
- "officeApps": "Office apps",
- "officeProPlusPolicies": "Policies for Office apps",
- "onPremise": "On Premise",
- "onPremisesConnector": "Exchange ActiveSync on-premises connector",
- "onPremisesDeviceAccess": "Exchange ActiveSync devices",
- "onPremisesManageAccess": "Exchange on-premises access",
- "outOfDateIosDevices": "Installation failures for iOS devices",
- "overview": "Overview",
- "partnerDeviceManagement": "Partner device management",
- "perUpdateRingDeploymentState": "Per update ring deployment state",
- "permissions": "Permissions",
- "platformApps": "{0} apps",
- "platformDevices": "{0} devices",
- "platformEnrollment": "{0} enrollment",
- "policies": "Policies",
- "profiles": "Profiles",
- "properties": "Properties",
- "reports": "Reports",
- "retireNoncompliantDevices": "Retire noncompliant devices",
- "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
- "role": "Role",
- "scriptManagement": "Scripts",
- "securityBaselines": "Security baselines",
- "serviceToServiceConnector": "Exchange online connector",
- "servicenowConnector": "ServiceNow connector",
- "shellScripts": "Shell scripts",
- "teamViewerConnector": "TeamViewer connector",
- "telecomeExpenseManagement": "Telecom expense management",
- "tenantAdmin": "Tenant admin",
- "tenantAdministration": "Tenant administration",
- "termsAndConditions": "Terms and conditions",
- "titles": "Titles",
- "troubleshoot": "Troubleshoot",
- "troubleshootSupport": "Troubleshooting + support",
- "user": "User",
- "userExecutionStatus": "User status",
- "wdacSupplementalPolicies": "S mode supplemental policies",
- "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
- "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
- "windows10DriverUpdate": "Driver updates for Windows 10 and later",
- "windows10QualityUpdate": "Quality updates for Windows 10 and later",
- "windows10UpdateRings": "Update rings for Windows 10 and later",
- "windows10XPolicyFailures": "Windows 10X policy failures",
- "windows365PartnerConnector": "Windows 365 partner connectors",
- "windowsDiagnosticData": "Windows data",
- "windowsEnterpriseCertificate": "Windows enterprise certificate",
- "windowsManagement": "Scripts",
- "windowsSideLoadingKeys": "Windows side loading keys",
- "windowsSymantecCertificate": "Windows DigiCert certificate",
- "windowsThreatReport": "Threat agent status"
- },
- "ScopeTypes": {
- "allDevices": "All Devices",
- "allUsers": "All Users",
- "allUsersAndDevices": "All Users & All Devices",
- "selectedGroups": "Selected Groups"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search as default",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype for Business",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone and iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Not supported",
+ "supportEnding": "Support ending",
+ "supported": "Supported"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Default",
- "header": "Update Priority",
- "postponed": "Postponed",
- "priority": "High Priority"
- },
- "AutoUpdateSupersededApps": {
- "label": "Auto-update",
- "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Allow user to snooze the restart notification",
- "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
- "durationInMinutes": "Device restart grace period (minutes)",
- "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Time zone",
- "local": "Device time zone",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Date and time",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
- "deadlineTimeLabel": "App installation deadline",
- "defaultTime": "As soon as possible",
- "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
- "specificTime": "A specific date and time",
- "startTimeColumnLabel": "Availability",
- "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
- "startTimeLabel": "App availability"
- },
- "restartGracePeriodHeader": "Restart grace period",
- "restartGracePeriodLabel": "Device restart grace period",
- "summaryTitle": "End user experience"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "The file or folder as the selected requirement.",
- "pathToolTip": "The complete path of the file or folder to detect.",
- "property": "Property",
- "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
- },
- "GridColumns": {
- "pathOrScript": "Path/Script",
- "type": "Type"
- },
- "Registry": {
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the comparison.",
- "registryRequirement": "Registry key requirement",
- "registryRequirementTooltip": "Select the registry key requirement comparison.",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the required registry value."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Automatically approve all recommended driver updates",
+ "manual": "Manually approve and deploy driver updates"
+ },
+ "BulkActions": {
+ "button": "Bulk actions"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Approval method:"
},
- "RequirementTypeOptions": {
- "fileType": "File",
- "registry": "Registry",
- "script": "Script"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Boolean",
- "dateTime": "Date and Time",
- "float": "Floating Point",
- "integer": "Integer",
- "string": "String",
- "version": "Version"
- },
- "duplicateName": "Script name {0} has already been used. Please enter a different name.",
- "enforceSignatureCheck": "Enforce script signature check",
- "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
- "loggedOnCredentials": "Run this script using the logged on credentials",
- "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
- "operatorTooltip": "Select the operator for the requirement comparison.",
- "requirementMethod": "Select output data type",
- "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
- "scriptName": "Script name",
- "value": "Value",
- "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ "DeploymentDeferralInDays": {
+ "label": "Make updates available after",
+ "units": "(days)",
+ "value": "{0} days"
+ },
+ "DriverAction": {
+ "header": "Select an action below.",
+ "label": "Driver action",
+ "placeholder": "Select an action"
},
- "bladeTitle": "Add a Requirement rule",
- "createRequirementHeader": "Create a requirement.",
- "header": "Configure additional requirement rules",
- "label": "Additional requirement rules",
- "noRequirementsSelectedPlaceholder": "No requirements are specified.",
- "requirementType": "Requirement type",
- "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
- },
- "architectures": "Operating system architecture",
- "architecturesTooltip": "Choose the architectures needed to install the app.",
- "bladeTitle": "Requirements",
- "diskSpace": "Disk space required (MB)",
- "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
- "header": "Specify the requirements that devices must meet before the app is installed:",
- "maximumTextFieldValue": "The value must be at most {0}.",
- "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
- "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
- "minimumLogicalProcessors": "Minimum number of logical processors required",
- "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
- "minimumOperatingSystem": "Minimum operating system",
- "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
- "minumumTextFieldValue": "The value must be at least {0}.",
- "physicalMemory": "Physical memory required (MB)",
- "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
- "selectorLabel": "Requirements",
- "validNumber": "Please enter a valid number."
- },
- "PolicySet": {
- "appManagement": "Application management",
- "assignments": "Assignments",
- "basics": "Basics",
- "deviceEnrollment": "Device enrollment",
- "deviceManagement": "Device management",
- "scopeTags": "Scope tags",
- "appConfigurationTitle": "App configuration policies",
- "appProtectionTitle": "App protection policies",
- "appTitle": "Apps",
- "iOSAppProvisioningTitle": "iOS app provisioning profiles",
- "deviceLimitRestrictionTitle": "Device limit restrictions",
- "deviceTypeRestrictionTitle": "Device type restrictions",
- "enrollmentStatusSettingTitle": "Enrollment status pages",
- "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
- "deviceComplianceTitle": "Device compliance policies",
- "deviceConfigurationTitle": "Device configuration profiles",
- "powershellScriptTitle": "Powershell scripts"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Included drivers"
+ },
+ "SelectDrivers": {
+ "header": "Select drivers to include in your bulk action"
+ },
+ "SelectDriversToInclude": {
+ "button": "Select drivers to include"
+ },
+ "SelectLessDrivers": {
+ "validation": "At most one hundred drivers can be selected"
+ },
+ "SelectMoreDrivers": {
+ "validation": "At least one driver should be selected"
+ },
+ "SelectedDrivers": {
+ "label": "Selected drivers"
+ },
+ "availabilityDate": "Make available in Windows Update",
+ "bladeTitle": "Driver updates Windows 10 and later (preview)",
+ "lastSync": "Last sync:",
+ "lastSyncDefaultText": "Pending initial inventory collection",
+ "loadError": "Loading failed!"
+ },
+ "DriverStatus": {
+ "approved": "Approved",
+ "declined": "Declined",
+ "export": "Exporting recommended drivers",
+ "needsReview": "Needs review",
+ "paused": "Paused"
+ },
+ "DriversToReview": {
+ "text": "{0} to review"
+ },
+ "Subtitle": {
+ "automatic": "Automatic approval driver update policy",
+ "manual": "Manual approval driver update policy"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Recommended",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrain",
- "countryNameZA": "South Africa",
- "countryNameJO": "Jordan",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Czech Republic",
- "countryNameLT": "Lithuania",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hong Kong SAR",
- "countryNameGH": "Ghana",
- "countryNameSA": "Saudi Arabia",
- "countryNamePG": "Papua New Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "India",
- "countryNameHN": "Honduras",
- "countryNameRO": "Romania",
- "countryNameKZ": "Kazakhstan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Georgia",
- "countryNameTT": "Trinidad and Tobago",
- "countryNameMP": "Northern Mariana Islands",
- "countryNameMV": "Maldives",
- "countryNameFI": "Finland",
- "countryNameNO": "Norway",
- "countryNameEE": "Estonia",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Uzbekistan",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tajikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "France",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italy",
- "countryNameAZ": "Azerbaijan",
- "countryNameKG": "Kyrgyzstan",
- "countryNameWF": "Wallis and Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falkland Islands (Islas Malvinas)",
- "countryNameGY": "Guyana",
- "countryNameSS": "South Sudan",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Syria",
- "countryNameMD": "Moldova",
- "countryNameVC": "Saint Vincent and the Grenadines",
- "countryNameID": "Indonesia",
- "countryNameRE": "Reunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "North Macedonia",
- "countryNameTG": "Togo",
- "countryNamePF": "French Polynesia",
- "countryNameKY": "Cayman Islands",
- "countryNameIO": "British Indian Ocean Territory",
- "countryNameRU": "Russia",
- "countryNameMA": "Morocco",
- "countryNameAU": "Australia",
- "countryNameBO": "Bolivia",
- "countryNameVA": "Holy See (Vatican City State)",
- "countryNameVG": "Virgin Islands, British",
- "countryNameFM": "Micronesia",
- "countryNameAQ": "Antarctica",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brazil",
- "countryNameIS": "Iceland",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgaria",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamas, The",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macao SAR",
- "countryNameRW": "Rwanda",
- "countryNameAS": "American Samoa",
- "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
- "countryNameMF": "Saint Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "New Caledonia",
- "countryNameAC": "Ascension Island",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladesh",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Canada",
- "countryNameSH": "Saint Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolia",
- "countryNamePA": "Panama",
- "countryNameCM": "Cameroon",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japan",
- "countryNameCY": "Cyprus",
- "countryNameCD": "Democratic Republic of Congo",
- "countryNameTN": "Tunisia",
- "countryNameTR": "Türkiye",
- "countryNameWS": "Samoa",
- "countryNameSE": "Sweden",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Cambodia",
- "countryNamePL": "Poland",
- "countryNameDZ": "Algeria",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominica",
- "countryNameEG": "Egypt",
- "countryNameGF": "French Guiana",
- "countryNameNZ": "New Zealand",
- "countryNamePS": "Palestinian Authority",
- "countryNameIL": "Israel",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Greece",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauritania",
- "countryNameVI": "Virgin Islands, U.S.",
- "countryNameGQ": "Equatorial Guinea",
- "countryNameMX": "Mexico",
- "countryNameDJ": "Djibouti",
- "countryNameGN": "Guinea",
- "countryNameCN": "China",
- "countryNameMZ": "Mozambique",
- "countryNameBV": "Bouvet Island",
- "countryNameNF": "Norfolk Island",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "South Georgia and the South Sandwich Islands",
- "countryNameRS": "Serbia",
- "countryNameCC": "Cocos (Keeling) Islands",
- "countryNameNA": "Namibia",
- "countryNameDE": "Germany",
- "countryNameCG": "Republic of Congo",
- "countryNameKW": "Kuwait",
- "countryNameMH": "Marshall Islands",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarus",
- "countryNameMY": "Malaysia",
- "countryNameST": "São Tomé and Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Chad",
- "countryNameCX": "Christmas Island",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bissau",
- "countryNameUA": "Ukraine",
- "countryNameCU": "Cuba",
- "countryNameCO": "Colombia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Croatia",
- "countryNameSC": "Seychelles",
- "countryNameNL": "Netherlands",
- "countryNameUM": "US Minor Outlying Islands",
- "countryNameIM": "Isle of Man",
- "countryNameFJ": "Fiji",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "United Kingdom",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovenia",
- "countryNameAM": "Armenia",
- "countryNameAR": "Argentina",
- "countryNamePM": "Saint Pierre and Miquelon",
- "countryNameTF": "French Southern and Antarctic Lands",
- "countryNameDO": "Dominican Republic",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugal",
- "countryNameCF": "Central African Republic",
- "countryNameBE": "Belgium",
- "countryNameKM": "Comoros",
- "countryNameLY": "Libya",
- "countryNameIE": "Ireland",
- "countryNameKP": "North Korea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slovakia",
- "countryNameTC": "Turks and Caicos Islands",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Yemen",
- "countryNameBA": "Bosnia and Herzegovina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Iraq",
- "countryNameSJ": "Svalbard and Jan Mayen Island",
- "countryNameAX": "Åland Islands",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Faroe Islands",
- "countryNameBL": "Saint Barthélemy",
- "countryNameLB": "Lebanon",
- "countryNameJM": "Jamaica",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Spain",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapore",
- "countryNameAL": "Albania",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d’Ivoire",
- "countryNameTW": "Taiwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cook Islands",
- "countryNameTH": "Thailand",
- "countryNameHM": "Heard Island and McDonald Islands",
- "countryNameGD": "Grenada",
- "countryNameUS": "United States",
- "countryNameAT": "Austria",
- "countryNameKR": "Korea, Republic of",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Denmark",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Ethiopia",
- "countryNameMG": "Madagascar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxembourg",
- "countryNameQA": "Qatar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Solomon Islands",
- "countryNameAE": "United Arab Emirates",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua and Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Hungary",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Switzerland",
- "countryNamePN": "Pitcairn Islands",
- "countryNameGL": "Greenland",
- "countryNamePH": "Philippines",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts and Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Latvia",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "Unable to sync {0}",
+ "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
+ "pending": "{0} sync in progress",
+ "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
+ "success": "{0} sync complete",
+ "successDescription": "Sync with WUfB service completed at {0}"
+ },
+ "SyncSpinner": {
+ "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
+ },
+ "TabName": {
+ "basics": "Basics",
+ "driverUpdateSettings": "Settings",
+ "otherDrivers": "Other drivers",
+ "properties": "Properties",
+ "recommendedDrivers": "Recommended drivers"
+ },
+ "driverAddFilter": "Add filter",
+ "driverApplicableDevices": "Applicable devices",
+ "driverApprovalStatus": "Status",
+ "driverBulkActions": "Bulk actions",
+ "driverClass": "Driver class",
+ "driverCount": "Showing {0} to {1} of {2} records",
+ "driverFilterNoneSelected": "None selected",
+ "driverManufacturer": "Manufacturer",
+ "driverName": "Driver name",
+ "driverNameLower": "windows driver update deployment",
+ "driverNameUpper": "Windows driver update deployment",
+ "driverRefresh": "Refresh",
+ "driverReleaseDate": "Release date",
+ "driverSearch": "Search",
+ "driverSearchKeyword": "Enter search keyword",
+ "driverVersion": "Version",
+ "firstDeploymentDate": "First Deployment",
+ "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
+ "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge configuration settings",
+ "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
+ "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
+ "generalAppConfig": "General app configuration",
+ "generalSettings": "General configuration settings",
+ "outlookSMIMEConfig": "Outlook S/MIME settings",
+ "outlookSettings": "Outlook configuration settings",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-ru.json b/Documentation/Strings-ru.json
index 6bb83a4..ae76dbb 100644
--- a/Documentation/Strings-ru.json
+++ b/Documentation/Strings-ru.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Конфигурация защиты данных"
- },
- "OrganizeMailByThread": {
- "title": "Сообщения в цепочках",
- "tooltip": "По умолчанию в Outlook используется режим объединения бесед в представление беседы с несколькими цепочками. Если этот параметр отключен, Outlook будет отображать все сообщения по отдельности и не будет группировать их по цепочкам."
- },
- "Sync": {
- "header": "Синхронизация полей контактов с конфигурацией приложений собственных контактов"
- },
- "allowBiometricsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
- "allowBiometricsTitle": "Требовать биометрию для доступа к приложению",
- "allowBiometricsTooltip": "Для доступа пользователей к приложению на устройстве можно требовать биометрические данные, такие как TouchID или FaceID. Они запрашиваются в дополнение к методу проверки подлинности, выбранному в профиле. Не включайте эту функцию при наличии развернутых политик Защиты приложений Intune, так как они уже содержат требования доступа к управляемым данным. При использовании обеих функций будет возникать множество запросов на доступ к мобильному приложению Outlook. Если не настроить эту функцию, по умолчанию она будет для приложения отключена.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
- "allowCalendarNotificationsTitle": "Уведомления календаря",
- "allowCalendarNotificationsTooltip": "Разрешите отображение полных сведений в уведомлениях календаря, если в политике защиты приложений параметр \"Уведомления о данных организации\" имеет значение \"Блокировка данных организации\".",
- "allowDefaultAppSignatureTitle": "Подпись приложения по умолчанию",
- "allowDefaultAppSignatureTooltip": "Подпись приложения по умолчанию указывает, будет ли приложение использовать \\\"Получить Outlook для iOS\\\" в качестве подписи по умолчанию во время написания сообщения. Если параметр отключен, подпись по умолчанию не будет использоваться, однако пользователи могут добавить собственную подпись. Если задано значение \\\"Не настроено\\\", параметр приложения по умолчанию включен.",
- "allowExternalRecipientsMailTipTitle": "Внешние получатели",
- "allowExternalRecipientsMailTipTooltip": "MailTip внешних получателей отображается, если отправитель добавляет получателя, не работающего в организации, или группу рассылки, в которую входят такие получатели. MailTip информирует отправителя о том, будет ли письмо отправлено получателю за пределами организации, и помогает выбрать подходящие формулировки, тон и содержимое. Доступно только для учетных записей Exchange Online и локальных учетных записей с современной гибридной проверкой подлинности. Если не настроить эту функцию, по умолчанию она будет включена для приложения.",
- "allowFocusedInboxTitle": "Сортировка почты",
- "allowFocusedInboxTooltip": "Сортировка почты позволяет разделить папку \\\"Входящие\\\" на две вкладки: \\\"Отсортированные\\\" (где будут самые важные письма) и \\\"Прочее\\\" (куда попадает, чтобы не мешаться, все остальное). Если не настроить эту функцию, по умолчанию она будет для приложения включена.",
- "allowMailNotificationsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
- "allowMailNotificationsTitle": "Уведомления по почте",
- "allowMailNotificationsTooltip": "Это значение указывает, разрешены ли в Outlook уведомления по почте. Если задать значение \\\"Нет\\\", они будут отключены.",
- "allowOrgDataOnWearablesTitle": "Данные организации на переносных устройствах",
- "allowOrgDataOnWearablesTooltip": "Это значение указывает, разрешена ли синхронизация данных Outlook с переносным устройством. Если задать значение \\\"Нет\\\", она будет отключена.",
- "allowSaveContactsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю изменять параметр синхронизации контактов.",
- "allowSaveContactsTitle": "Сохранить контакты",
- "allowSaveContactsTooltip": "При сохранении контактов в собственную адресную книгу мобильного устройства новые звонки и SMS будут связываться с существующими пользовательскими контактами Outlook. Если не настроить эту функцию, по умолчанию она будет для приложения отключена.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
- "allowSmartReplyTitle": "Предлагаемые ответы",
- "allowSmartReplyTooltip": "При открытии сообщения Outlook может предлагать ответы под сообщением. Выбранный ответ можно изменить перед отправкой. Если не настроить эту функцию, по умолчанию она будет для приложения включена.",
- "allowUserChangeGeneralToolTip": "Укажите, разрешено ли пользователю менять настройку.",
- "allowUserChangeTitle": "Разрешить пользователю менять настройку",
- "blockExternalImagesAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
- "blockExternalImagesTitle": "Блокировка внешних изображений",
- "blockExternalImagesTooltip": "При блокировке внешних изображений приложение не позволит скачивать размещенные в Интернете изображения, встроенные в текст сообщения. Если не настроить эту функцию, по умолчанию она будет для приложения отключена.",
- "disableAddinsTitle": "Разрешение надстроек",
- "disableAddinsTooltip": "По умолчанию политика защиты приложений позволяет пользователям использовать сторонние надстройки, но может использоваться для блокировки надстроек с помощью параметра \"Синхронизировать данные приложения, управляемого политикой, с собственными приложениями или надстройками\". Установка для этого параметра значения \"Отключено\" заблокирует надстройки, если для параметра политики защиты приложений установлено значение \"Разрешено\".",
- "discoverFeedTitle": "Веб-канал обнаружения",
- "discoverFeedTooltip": "Веб-канал обнаружения отображает ваши самые часто используемые файлы Office. По умолчанию он включен, когда для пользователя включена служба Delve. Если не настроить канал, по умолчанию для приложения используется значение \\\"Включено\\\".",
- "enableSMIMETitle": "Включить S/MIME",
- "enableSMIMETooltip": "Укажите, включены ли элементы управления S/MIME при написании электронного письма.",
- "encryptAllEmails": "Шифровать все сообщения электронной почты",
- "encryptAllEmailsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю изменять параметр \\\"Шифровать все сообщения электронной почты\\\".",
- "encryptAllEmailsTooltip": "Укажите, следует ли шифровать все сообщения электронной почты. Шифрование преобразует данные в зашифрованный текст, чтобы их мог прочесть только предполагаемый получатель.",
- "ldapUrl": "URL-адрес LDAP",
- "ldapUrlTooltip": "Это имя узла LDAP, где клиенты могут получить открытые ключи шифрования для получателей электронной почты. Сообщения электронной почты будут зашифрованы, когда ключ станет доступен. Поддерживаемые форматы: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
- "nativeCalendarSyncMAMOnlyTitle": "Разрешение синхронизации календаря",
- "nativeCalendarSyncMAMOnlyTooltip": "По умолчанию политика защиты приложений позволяет синхронизировать календарь с собственным приложением календаря, но может использоваться для блокировки доступности календаря. Этот параметр работает независимо от параметра политики защиты приложений и позволяет организациям определять доступность синхронизации календаря для рабочей или учебной учетной записи.",
- "nativeCalendarSyncTitle": "Синхронизация календарей",
- "nativeCalendarSyncTooltip": "По умолчанию политика защиты приложений разрешает синхронизацию программы-календаря с собственным приложением \"Календарь\", но может использоваться для блокировки доступности синхронизации календаря с помощью параметра \"Синхронизировать данные из управляемых приложений, с собственными приложениями и надстройками\". Установка для этого параметра значения \"Отключено\" заблокирует синхронизацию календаря, если для параметра политики защиты приложений установлено значение \"Разрешено\".",
- "playMyEmailsTitle": "Воспроизвести мои письма",
- "playMyEmailsTooltip": "По умолчанию функция \\\"Воспроизвести мои письма\\\" отключена в приложении, но доступна соответствующим пользователям в виде баннера в папке \\\"Входящие\\\". Если параметру задано значение \\\"Отключено\\\", функция будет недоступна соответствующим пользователям в приложении. Пользователи могут вручную включить эту функцию в приложении, даже если она отключена. Если параметру задано значение \\\"Не настроено\\\", по умолчанию используется значение параметра \\\"Включено\\\", и функция будет доступна соответствующим пользователям.",
- "signAllEmails": "Подписать все сообщения электронной почты",
- "signAllEmailsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю изменять параметр \\\"Подписать все сообщения электронной почты\\\".",
- "signAllEmailsTooltip": "Укажите, следует ли подписывать все сообщения электронной почты. Цифровая подпись подтверждает подлинность сообщения и защищает его содержимое от незаконного изменения при передаче.",
- "syncAddressTitle": "Адрес",
- "syncAddressTooltip": "Это значение указывает, следует ли синхронизировать адрес контакта с собственными контактами.",
- "syncBirthdayTitle": "День рождения",
- "syncBirthdayTooltip": "Это значение указывает, следует ли синхронизировать день рождения контакта с собственными контактами.",
- "syncCompanyTitle": "Организация",
- "syncCompanyTooltip": "Это значение указывает, следует ли синхронизировать название компании контакта с собственными контактами.",
- "syncDepartmentTitle": "Отдел",
- "syncDepartmentTooltip": "Это значение указывает, следует ли синхронизировать отдел контакта с собственными контактами.",
- "syncEmailAddressTitle": "Адрес электронной почты",
- "syncEmailAddressTooltip": "Это значение указывает, следует ли синхронизировать адрес электронной почты контакта с собственными контактами.",
- "syncInstantMessagingAddressTitle": "Адрес для обмена мгновенными сообщениями",
- "syncInstantMessagingAddressTooltip": "Это значение указывает, следует ли синхронизировать адрес для обмена мгновенными сообщениями с собственными контактами.",
- "syncJobTitleTitle": "Должность",
- "syncJobTitleTooltip": "Это значение указывает, следует ли синхронизировать должность контакта с собственными контактами.",
- "syncNicknameTitle": "Псевдоним",
- "syncNicknameTooltip": "Это значение указывает, следует ли синхронизировать псевдоним контакта с собственными контактами.",
- "syncNotesTitle": "Notes",
- "syncNotesTooltip": "Это значение указывает, следует ли синхронизировать заметки контакта с собственными контактами.",
- "syncPhoneHomeFaxNumberTitle": "Номер домашнего факса",
- "syncPhoneHomeFaxNumberTooltip": "Это значение указывает, следует ли синхронизировать номер домашнего факса с собственными контактами.",
- "syncPhoneHomeNumberTitle": "Номер домашнего телефона",
- "syncPhoneHomeNumberTooltip": "Это значение указывает, следует ли синхронизировать номер домашнего телефона с собственными контактами.",
- "syncPhoneMobileNumberTitle": "Номер мобильного телефона",
- "syncPhoneMobileNumberTooltip": "Это значение указывает, следует ли синхронизировать номер мобильного телефона с собственными контактами.",
- "syncPhoneOtherNumberTitle": "Другой номер телефона",
- "syncPhoneOtherNumberTooltip": "Это значение указывает, следует ли синхронизировать другой номер телефона с собственными контактами.",
- "syncPhonePagerNumberTitle": "Номер пейджера",
- "syncPhonePagerNumberTooltip": "Это значение указывает, следует ли синхронизировать номер пейджера с собственными контактами.",
- "syncPhoneWorkFaxNumberTitle": "Номер рабочего факса",
- "syncPhoneWorkFaxNumberTooltip": "Это значение указывает, следует ли синхронизировать номер рабочего факса с собственными контактами.",
- "syncPhoneWorkNumberTitle": "Номер рабочего телефона",
- "syncPhoneWorkNumberTooltip": "Это значение указывает, следует ли синхронизировать номер рабочего телефона с собственными контактами.",
- "syncPrefixTitle": "Префикс имени",
- "syncPrefixTooltip": "Это значение указывает, следует ли синхронизировать префикс имени контакта с собственными контактами.",
- "syncSuffixTitle": "Суффикс имени",
- "syncSuffixTooltip": "Это значение указывает, следует ли синхронизировать суффикс имени контакта с собственными контактами.",
- "textPredictionsTitle": "Прогнозирование текста",
- "textPredictionsTooltip": "Outlook может предлагать слова и фразы при создании сообщений. Если Outlook предлагает вариант, проведите, чтобы принять его. Если задано значение \\\"Не настроено\\\", используется параметр приложения по умолчанию со значением \\\"Включено\\\".",
- "themesEnabledTitle": "Темы включены",
- "themesEnabledTooltip": "Укажите, разрешено ли пользователю применять настраиваемую визуальную тему."
- },
- "Languages": {
- "ar-aE": "Арабский (ОАЭ)",
- "ar-bH": "Арабский (Бахрейн)",
- "ar-dZ": "Арабский (Алжир)",
- "ar-eG": "Арабский (Египет)",
- "ar-iQ": "Арабский (Ирак)",
- "ar-jO": "Арабский (Иордания)",
- "ar-kW": "Арабский (Кувейт)",
- "ar-lB": "Арабский (Ливан)",
- "ar-lY": "Арабский (Ливия)",
- "ar-mA": "Арабский (Марокко)",
- "ar-oM": "Арабский (Оман)",
- "ar-qA": "Арабский (Катар)",
- "ar-sA": "Арабский (Саудовская Аравия)",
- "ar-sY": "Арабский (Сирия)",
- "ar-tN": "Арабский (Тунис)",
- "ar-yE": "Арабский (Йемен)",
- "az-cyrl": "Азербайджанский (кириллица, Азербайджан)",
- "az-latn": "Азербайджанский (латиница, Азербайджан)",
- "bn-bD": "Бенгальский (Бангладеш)",
- "bn-iN": "Бенгальский (Индия)",
- "bs-cyrl": "Боснийский (кириллица)",
- "bs-latn": "Боснийский (латиница)",
- "zh-cN": "Китайский (КНР)",
- "zh-hK": "Китайский (Гонконг, САР)",
- "zh-mO": "Китайский (Макао, САР)",
- "zh-sG": "Китайский (Сингапур)",
- "zh-tW": "Китайский (Тайвань)",
- "hr-bA": "Хорватский (латиница)",
- "hr-hR": "Хорватский (Хорватия)",
- "nl-bE": "Нидерландский (Бельгия)",
- "nl-nL": "Нидерландский (Нидерланды)",
- "en-aU": "Английский (Австралия)",
- "en-bZ": "Английский (Белиз)",
- "en-cA": "Английский (Канада)",
- "en-cabn": "Английский (Карибские острова)",
- "en-iE": "Английский (Ирландия)",
- "en-iN": "Английский (Индия)",
- "en-jM": "Английский (Ямайка)",
- "en-mY": "Английский (Малайзия)",
- "en-nZ": "Английский (Новая Зеландия)",
- "en-pH": "Английский (Республика Филиппины)",
- "en-sG": "Английский (Сингапур)",
- "en-tT": "Английский (Тринидад и Тобаго)",
- "en-uK": "Английский (Соединенное Королевство)",
- "en-uS": "Английский (Соединенные Штаты)",
- "en-zA": "Английский (Южная Африка)",
- "en-zW": "Английский (Зимбабве)",
- "fr-bE": "Французский (Бельгия)",
- "fr-cA": "Французский (Канада)",
- "fr-cH": "Французский (Швейцария)",
- "fr-fR": "французский (Франция)",
- "fr-lU": "Французский (Люксембург)",
- "fr-mC": "Французский (Монако)",
- "de-aT": "Немецкий (Австрия)",
- "de-cH": "Немецкий (Швейцария)",
- "de-dE": "Немецкий (Германия)",
- "de-lI": "Немецкий (Лихтенштейн)",
- "de-lU": "Немецкий (Люксембург)",
- "iu-cans": "Инуктитут (слоговое письмо, Канада)",
- "iu-latn": "Инуктитут (латиница, Канада)",
- "it-cH": "Итальянский (Швейцария)",
- "it-iT": "Итальянский (Италия)",
- "ms-bN": "Малайский (Бруней-Даруссалам)",
- "ms-mY": "Малайский (Малайзия)",
- "mn-cN": "Монгольский (старомонгольское письмо, КНР)",
- "mn-mN": "Монгольский (кириллица, Монголия)",
- "no-nB": "Норвежский (букмол, Норвегия)",
- "no-nn": "Норвежский (нюнорск, Норвегия)",
- "pt-bR": "Португальский (Бразилия)",
- "pt-pT": "Португальский (Португалия)",
- "quz-bO": "Кечуа (Боливия)",
- "quz-eC": "Кечуа (Эквадор)",
- "quz-pE": "Кечуа (Перу)",
- "smj-nO": "Луле-саамский (Норвегия)",
- "smj-sE": "Луле-саамский (Швеция)",
- "se-fI": "Северносаамский (Финляндия)",
- "se-nO": "Северносаамский (Норвегия)",
- "se-sE": "Северносаамский (Швеция)",
- "sma-nO": "Южносаамский (Норвегия)",
- "sma-sE": "Южносаамский (Швеция)",
- "smn": "Инари-саамский (Финляндия)",
- "sms": "Сколт-саамский (Финляндия)",
- "sr-Cyrl-bA": "Сербский (кириллица)",
- "sr-Cyrl-rS": "Сербский (кириллица, Сербия и Черногория (бывшая))",
- "sr-Latn-bA": "Сербский (латиница)",
- "sr-Latn-rS": "Сербский (латиница, Сербия)",
- "dsb": "Нижнелужицкий (Германия)",
- "hsb": "Верхнелужицкий (Германия)",
- "es-es-tradnl": "Испанский (Испания, традиционная сортировка)",
- "es-aR": "Испанский (Аргентина)",
- "es-bO": "Испанский (Боливия)",
- "es-cL": "Испанский (Чили)",
- "es-cO": "Испанский (Колумбия)",
- "es-cR": "Испанский (Коста-Рика)",
- "es-dO": "Испанский (Доминиканская Республика)",
- "es-eC": "Испанский (Эквадор)",
- "es-eS": "Испанский (Испания)",
- "es-gT": "Испанский (Гватемала)",
- "es-hN": "Испанский (Гондурас)",
- "es-mX": "Испанский (Мексика)",
- "es-nI": "Испанский (Никарагуа)",
- "es-pA": "Испанский (Панама)",
- "es-pE": "Испанский (Перу)",
- "es-pR": "Испанский (Пуэрто-Рико)",
- "es-pY": "Испанский (Парагвай)",
- "es-sV": "Испанский (Эль-Сальвадор)",
- "es-uS": "Испанский (США)",
- "es-uY": "Испанский (Уругвай)",
- "es-vE": "Испанский (Венесуэла)",
- "sv-fI": "Шведский (Финляндия)",
- "uz-cyrl": "Узбекский (кириллица, Узбекистан)",
- "uz-latn": "Узбекский (латиница, Узбекистан)",
- "af": "Африкаанс (Южная Африка)",
- "sq": "Албанский (Албания)",
- "am": "Амхарский (Эфиопия)",
- "hy": "Армянский (Армения)",
- "as": "Ассамский (Индия)",
- "ba": "Башкирский (Россия)",
- "eu": "Баскский (Баскский)",
- "be": "Белорусский (Беларусь)",
- "br": "Бретонский (Франция)",
- "bg": "Болгарский (Болгария)",
- "ca": "Каталонский (Каталонский)",
- "co": "Корсиканский (Франция)",
- "cs": "Чешский (Чешская Республика)",
- "da": "Датский (Дания)",
- "dv": "Мальдивский (Мальдивы)",
- "et": "Эстонский (Эстония)",
- "fo": "Фарерский (Фарерские о-ва)",
- "fil": "Филиппинский (Филиппины)",
- "fi": "Финский (Финляндия)",
- "gl": "Галисийский (Галисия)",
- "ka": "Грузинский (Грузия)",
- "el": "Греческий (Греция)",
- "gu": "Гуджарати (Индия)",
- "ha": "Хауса (латиница, Нигерия)",
- "he": "Иврит (Израиль)",
- "hi": "Хинди (Индия)",
- "hu": "Венгерский (Венгрия)",
- "is": "Исландский (Исландия)",
- "ig": "Игбо (Нигерия)",
- "id": "Индонезийский (Индонезия)",
- "ga": "Ирландский (Ирландия)",
- "xh": "Коса (Южная Африка)",
- "zu": "Зулу (Южная Африка)",
- "ja": "Японский (Япония)",
- "kn": "Каннада (Индия)",
- "kk": "Казахский (Казахстан)",
- "km": "Кхмерский (Камбоджа)",
- "rw": "Киньяруанда (Руанда)",
- "sw": "Суахили (Кения)",
- "kok": "Конкани (Индия)",
- "ko": "Корейский (Корея)",
- "ky": "Киргизский (Киргизия)",
- "lo": "Лаосский (Лаосская Народно-Демократическая Республика)",
- "lv": "Латвийский (Латвия)",
- "lt": "Литовский (Литва)",
- "lb": "Люксембургский (Люксембург)",
- "mk": "Македонский (Северная Македония)",
- "ml": "Малаялам (Индия)",
- "mt": "Мальтийский (Мальта)",
- "mi": "Маори (Новая Зеландия)",
- "mr": "Маратхи (Индия)",
- "moh": "Мохаук (племя Мохауков)",
- "ne": "Непальский (Непал)",
- "oc": "Окситанский (Франция)",
- "or": "Ория (Индия)",
- "ps": "Пушту (Афганистан)",
- "fa": "Фарси",
- "pl": "Польский (Польша)",
- "pa": "Панджаби (Индия)",
- "ro": "Румынский (Румыния)",
- "rm": "Ретороманский (Швейцария)",
- "ru": "Русский (Россия)",
- "sa": "Санскрит (Индия)",
- "st": "Северный сото (Южная Африка)",
- "tn": "Тсвана (Южная Африка)",
- "si": "Сингальский (Шри-Ланка)",
- "sk": "Словацкий (Словакия)",
- "sl": "Словенский (Словения)",
- "sv": "Шведский (Швеция)",
- "syr": "Сирийский (Сирия)",
- "tg": "Таджикский (кириллица, Таджикистан)",
- "ta": "Тамильский (Индия)",
- "tt": "Татарский (Россия)",
- "te": "Телугу (Индия)",
- "th": "Тайский (Таиланд)",
- "bo": "Тибетский (КНР)",
- "tr": "Турецкий (Турция)",
- "tk": "Туркменский (Туркменистан)",
- "uk": "Украинский (Украина)",
- "ur": "Урду (Исламская Республика Пакистан)",
- "vi": "Вьетнамский (Вьетнам)",
- "cy": "Валлийский (Соединенное Королевство)",
- "wo": "Волоф (Сенегал)",
- "ii": "носу (КНР)",
- "yo": "Йоруба (Нигерия)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender для конечной точки",
- "androidDeviceOwnerApplications": "Приложения",
- "androidDeviceOwnerPolicyMessages": "Пользовательские справочные сведения",
- "androidForWorkPassword": "Пароль устройства",
- "appManagement": "Разрешить или блокировать приложения",
- "applicationGuard": "Application Guard в Microsoft Defender",
- "applicationRestrictions": "Ограниченные приложения",
- "applicationVisibility": "Отображение или скрытие приложений",
- "applications": "App Store",
- "applicationsAndGames": "App Store, просмотр документов, игры",
- "applicationsAndGoogle": "Магазин Google Play",
- "appsAndExperience": "Приложения и интерфейс",
- "associatedDomains": "Связанные домены",
- "autonomousSingleAppMode": "Режим одного автономного приложения (ASAM)",
- "azureOperationalInsights": "Оперативная аналитика Azure",
- "bitLocker": "Шифрование Windows",
- "bootOptions": "Параметры загрузки",
- "browser": "Браузер",
- "builtinApps": "Встроенные приложения",
- "cameras": "Камеры",
- "cellular": "Сотовая связь",
- "cloudAndStorage": "Облако и хранилище",
- "cloudPrint": "Облачный принтер",
- "complianceEmailProfile": "Электронная почта",
- "connectedDevices": "Подключенные устройства",
- "connectivity": "Сотовая связь и взаимодействие",
- "contentCaching": "Кэширование содержимого",
- "controlPanelAndSettings": "Панель управления и параметры",
- "credentialGuard": "Credential Guard в Microsoft Defender",
- "customCompliance": "Настраиваемое соответствие",
- "customConfiguration": "Пользовательский профиль конфигурации",
- "customOMASettings": "Настраиваемые параметры OMA-URI",
- "customPreferences": "Файл настроек",
- "dFCISecuritySettings": "Настройки безопасности",
- "defender": "Антивирусная программа в Microsoft Defender",
- "defenderAntivirus": "Антивирусная программа в Microsoft Defender",
- "defenderExploitGuard": "Exploit Guard в Microsoft Defender",
- "defenderFirewall": "Брандмауэр Windows",
- "defenderLocalSecurityOptions": "Параметры безопасности локального устройства",
- "defenderSecurityCenter": "Центр безопасности в Microsoft Defender",
- "deliveryOptimization": "Оптимизация доставки",
- "derivedCredentialAuthenticationConfiguration": "Производные учетные данные",
- "deviceExperience": "Интерфейс устройства",
- "deviceFirmwareConfigurationInterface": "Интерфейс настройки встроенного ПО устройства",
- "deviceGuard": "Управление приложениями в Microsoft Defender",
- "deviceHealth": "Работоспособность устройств",
- "devicePassword": "Пароль устройства",
- "deviceProperties": "Свойства устройства",
- "deviceRestrictions": "Общие",
- "deviceSecurity": "Безопасность системы",
- "display": "Отображение",
- "domainJoin": "Присоединение к домену",
- "domains": "Домены",
- "edgeBrowser": "Устаревшие версии Microsoft Edge (версия 45 и более ранние версии)",
- "edgeBrowserSmartScreen": "Фильтр SmartScreen в Microsoft Defender",
- "edgeKiosk": "Режим киоска Microsoft Edge",
- "editionUpgrade": "Обновление выпуска",
- "education": "Образование",
- "educationDeviceCerts": "Сертификаты устройств",
- "educationStudentCerts": "Сертификаты учащихся",
- "educationTakeATest": "Выполнить проверку",
- "educationTeacherCerts": "Сертификаты преподавателей",
- "emailProfile": "Электронная почта",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Расширение единого входа для приложения",
- "filevault": "FileVault",
- "firewall": "Брандмауэр",
- "games": "Игры",
- "gatekeeper": "Привратник",
- "healthMonitoring": "Мониторинг работоспособности",
- "homeScreenLayout": "Макет начального экрана",
- "iOSWallpaper": "Фоновый рисунок",
- "importedPFX": "Импортированный сертификат PKCS",
- "iosDefenderAtp": "Microsoft Defender для конечной точки",
- "iosKiosk": "Киоск",
- "kernelExtensions": "Расширения ядра",
- "keyboardAndDictionary": "Клавиатура и словарь",
- "kiosk": "Киоск",
- "kioskAndroidEnterprise": "Выделенные устройства",
- "kioskConfiguration": "Киоск",
- "kioskConfigurationV2": "Киоск",
- "kioskWebBrowser": "Веб-браузер киоска",
- "lockScreenMessage": "Сообщение на экране блокировки",
- "lockedScreenExperience": "Интерфейс заблокированного экрана",
- "logging": "Создание отчетов и телеметрия",
- "loginItems": "Элементы входа",
- "loginWindow": "Окно входа",
- "macDefenderAtp": "Microsoft Defender для конечной точки",
- "maintenance": "Обслуживание",
- "malware": "Вредоносные программы",
- "messaging": "Сообщения",
- "microphonesAndSpeakers": "Микрофоны и динамики",
- "networkBoundary": "Граница сети",
- "networkProxy": "Прокси-сервер сети",
- "notifications": "Уведомления приложений",
- "pKCS": "Сертификат PKCS",
- "password": "Пароль",
- "personalProfile": "Личный профиль",
- "personalization": "Персонализация",
- "policyOverride": "Переопределение групповой политики",
- "ports": "Порты",
- "powerSettings": "Параметры управления питанием",
- "printer": "Принтер",
- "privacy": "Конфиденциальность",
- "privacyPerApp": "Исключения конфиденциальности на приложение",
- "privacyPreferences": "Параметры конфиденциальности",
- "projection": "Проекция",
- "radios": "Радио",
- "sCCMCompliance": "Соответствие Configuration Manager",
- "sCEP": "Сертификат SCEP",
- "sCEPProperties": "Сертификат SCEP",
- "sMode": "Смена режима (только программа предварительной оценки Windows)",
- "safari": "Safari",
- "search": "Поиск",
- "session": "Сеанс",
- "sharedDevice": "Общий iPad",
- "sharedPCAccountManager": "Устройство коллективного пользования с общим доступом",
- "singleSignOn": "Единый вход",
- "smartScreen": "Фильтр SmartScreen в Microsoft Defender",
- "softwareUpdates": "Параметры",
- "start": "Начало",
- "systemExtensions": "Расширения системы",
- "systemSecurity": "Безопасность системы",
- "trustedCert": "Доверенный сертификат",
- "uEFIAccess": "Доступ к UEFI",
- "updates": "Обновления",
- "userRights": "Права пользователей",
- "usersAndAccounts": "Пользователи и учетные записи",
- "vPN": "Базовая VPN",
- "vPNApps": "Автоподключение VPN",
- "vPNAppsAndTrafficRules": "Приложения и правила трафика",
- "vPNConditionalAccess": "Условный доступ",
- "vPNConnectivity": "Подключение",
- "vPNDNSTriggers": "Параметры DNS",
- "vPNIKEv2": "Параметры IKEv2",
- "vPNProxy": "Прокси",
- "vPNSplitTunneling": "Раздельное туннелирование",
- "vPNTrustedNetwork": "Обнаружение доверенной сети",
- "wakeSettings": "Параметры пробуждения",
- "webContentFilter": "Фильтр веб-содержимого",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender для конечной точки",
- "windowsDefenderATP": "Microsoft Defender для конечной точки",
- "windowsHelloForBusiness": "Windows Hello для бизнеса",
- "windowsSpotlight": "Windows: интересное",
- "wiredNetwork": "Проводная сеть",
- "wireless": "Беспроводная",
- "wirelessProjection": "Беспроводная проекция",
- "workProfile": "Параметры рабочего профиля",
- "workProfilePassword": "Пароль рабочего профиля",
- "xboxServices": "Службы Xbox",
- "zebraMx": "Профиль MX (только Zebra)",
- "complianceActionsLabel": "Действия при несоответствии"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Описание"
- },
- "FeatureDeploymentSettings": {
- "header": "Параметры развертывания компонентов"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Этот компонент не может снизить уровень устройства.",
- "label": "Развертываемое обновление компонентов"
- },
- "GradualRolloutEndDate": {
- "label": "Доступность для последней группы"
- },
- "GradualRolloutInterval": {
- "label": "Дни между группами"
- },
- "GradualRolloutStartDate": {
- "label": "Доступность для первой группы"
- },
- "Name": {
- "label": "Имя"
- },
- "OptionalUpdate": {
- "label": "Обязательное или необязательное обновление"
- },
- "RolloutOptions": {
- "label": "Параметры выпуска"
- },
- "RolloutSettings": {
- "header": "Когда следует сделать это обновление доступным в Центре обновления Windows?"
- },
- "ScopeSettings": {
- "header": "Настройка тегов области для этой политики."
- },
- "StartDateOnlyStartDate": {
- "label": "Первая доступная дата"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Отключено",
- "enabled": "Включено",
- "infoBalloonContent": "Управляйте тем, нужно ли устанавливать последнее обновление компонентов Windows 10 на устройства, не подходящие для Windows 11",
- "label": "Если устройство не подходит для запуска Windows 11, установите последнее обновление компонентов Windows 10",
- "notApplicable": "Неприменимо",
- "summaryLabel": "Установите Windows 10 на устройства, не поддерживающие Windows 11."
- },
- "bladeTitle": "Развертывания обновления компонентов",
- "deploymentSettingsTitle": "Параметры развертывания",
- "loadError": "Загрузка не выполнена!",
- "windows11EULA": "Выбирая развертывание этого обновления компонентов, вы соглашаетесь, что при применении этой операционной системы к устройству (1) соответствующая лицензия Windows была приобретена в рамках корпоративного лицензирования или (2) вы уполномочены накладывать обязательства на вашу организацию и принимаете от имени организации соответствующие условия лицензионного соглашения на использование программного обеспечения корпорации Майкрософт, доступные здесь {0}."
- },
- "Notifications": {
- "deploymentSaved": "Развертывание \"{0}\" сохранено.",
- "newFeatureUpdateDeploymentCreated": "Создано новое развертывание обновления компонентов."
- },
- "TabName": {
- "deploymentSettings": "Параметры развертывания",
- "groupAssignmentSettings": "Назначения",
- "scopeSettings": "Теги области"
- },
- "gradualRolloutLicenseWarning": "Эта возможность требует специального лицензирования.",
- "gradualRolloutLicenseWarningEdit": "Эту возможность можно продолжать использовать и настраивать до тех пор, пока политика не будет сохранена без выбранной возможности.",
- "licenseLearnMoreText": "Дополнительные сведения о предварительных требованиях и политиках обновления функций.",
- "optionalUpdateWarning": "Вариант \"Необязательное\" доступен только для обновлений Windows 11",
- "profileNameWarning": "Длина имени должна быть менее 64 символов",
- "specificLicensingRequired": "Для некоторых выбранных возможностей требуется определенные лицензии."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Разрешить использование строчных букв в ПИН-коде",
- "notAllow": "Запретить использование строчных букв в ПИН-коде",
- "requireAtLeastOne": "Требовать по меньшей мере одну строчную букву в ПИН-коде"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Разрешить использование специальных символов в ПИН-коде",
- "notAllow": "Запретить использование специальных символов в ПИН-коде",
- "requireAtLeastOne": "Требовать по меньшей мере один специальный символ в ПИН-коде"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Разрешить использование прописных букв в ПИН-коде",
- "notAllow": "Запретить использование прописных букв в ПИН-коде",
- "requireAtLeastOne": "Требовать по меньшей мере одну прописную букву в ПИН-коде"
- }
+ "InstallContextType": {
+ "device": "Устройство",
+ "deviceContext": "Контекст устройства",
+ "user": "Пользователь",
+ "userContext": "Контекст пользователя"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "Версия приложения",
- "dependencyName": "Имя зависимости",
- "lastModifiedTime": "Время последнего изменения",
- "relationship": "Связь",
- "replaced": "Заменено",
- "searchPlaceholder": "Фильтровать по имени приложения",
- "status": "Сведения о состоянии",
- "statusDetails": "Состояние",
- "supersedenceName": "Имя замены"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Зависимость дочернего элемента",
- "indirectSupersedence": "Нет прямой связи",
- "supersedenceAncestors": "Заменяет",
- "supersedenceDescendants": "Заменено"
- },
- "SupersededReplaced": {
- "no": "Нет",
- "yes": "Да"
- },
- "Tabs": {
- "chart": "Диаграмма",
- "dependency": "Зависимость",
- "label": "Представление: ",
- "supersedence": "Замена",
- "table": "Таблица"
- },
- "dependencyGraphAriaLabel": "Диаграмма зависимости приложений",
- "supersedenceGraphAriaLabel": "Диаграмма замены приложений"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Выберите сценарий обнаружения.",
- "scriptFileLabel": "Выберите ваш сценарий обнаружения"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Если этот параметр включен, устройства должны соответствовать настраиваемым правилам, определенным в JSON-файле на основе настраиваемых данных, которые возвращаются сценарием обнаружения PowerShell.",
- "label": "Решение \"Настраиваемое соответствие требованиям\" в настоящее время доступно в виде предварительной версии. Когда оно станет общедоступным, глобальный администратор или администратор выставления счетов сможет добавить его за дополнительную плату к вариантам лицензирования, включающим Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Сценарий",
- "placeholder": "Щелкните, чтобы выбрать",
- "searchboxPlaceholder": "Искать по имени сценария",
- "title": "Выберите сценарий обнаружения"
- },
- "SummaryGrid": {
- "ariaLabel": "Сводка правил настраиваемого соответствия"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "Для всех политик соответствия требуется одна блокировка.",
+ "graceperiod": "Расписание (дни после наступления несоответствия)",
+ "graceperiodInfo": "Укажите срок несоответствия в днях, по истечении которого следует применить это действие к устройству пользователя.",
+ "subtitle": "Укажите параметры действия.",
+ "title": "Параметры действия"
+ },
+ "List": {
+ "gracePeriodDay": "{0} день после наступления несоответствия",
+ "gracePeriodDays": "{0} дн. после наступления несоответствия",
+ "gracePeriodHour": "{0} ч после наступления несоответствия",
+ "gracePeriodHours": "{0} ч после наступления несоответствия",
+ "gracePeriodMinute": "{0} мин после наступления несоответствия",
+ "gracePeriodMinutes": "{0} мин после наступления несоответствия",
+ "immediately": "Немедленно",
+ "schedule": "Расписание",
+ "scheduleInfoBalloon": "Число дней после наступления несоответствия",
+ "subtitle": "Укажите последовательность действий для несоответствующих устройств.",
+ "title": "Действия"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Другие",
+ "additionalRecipients": "Дополнительные получатели (по электронной почте)",
+ "additionalRecipientsBladeTitle": "Выбор дополнительных получателей",
+ "emailAddressPrompt": "Введите адреса электронной почты (через запятую)",
+ "invalidEmail": "Недопустимый адрес электронной почты",
+ "messageTemplate": "Шаблон сообщения",
+ "noneSelected": "Выбранных нет",
+ "notSelected": "Не выбрано",
+ "numSelected": "Выбрано: {0}",
+ "selected": "Выбрано"
},
- "UploadFile": {
- "jsonFileLabel": "Отправка и проверка файла JSON с параметрами настраиваемого соответствия",
- "noFileSelectedError": "Выберите файл JSON.",
- "parseFileSelectedError": "Недопустимый файл JSON."
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Фильтр",
- "noFilters": "Нет"
- },
- "Platform": {
- "all": "Все",
- "android": "Администратор устройств Android",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Общий",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS и Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Неизвестно",
- "unsupported": "Не поддерживается",
- "windows": "Windows",
- "windows10": "Windows 10 и более поздних версий",
- "windows10CM": "Windows 10 и более поздней версии (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 для совместной работы",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 и более поздней версии",
- "windows8And10": "Windows 8 и 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 и более поздних версий",
- "windows10AndWindowsServer": "Windows 10, Windows 11 и Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 и более поздней версии (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Компьютер с Windows"
- },
+ "block": "Отметить устройство как несоответствующее политике",
+ "lockDevice": "Блокировка устройства (локальное действие)",
+ "lockDeviceWithPasscode": "Блокировка устройства (локальное действие)",
+ "noAction": "Нет действий",
+ "noActionRow": "Нет действий; выберите команду \"Добавить\", чтобы добавить действие.",
+ "pushNotification": "Отправить push-уведомление пользователю",
+ "remoteLock": "Удаленно заблокировать несовместимое устройство",
+ "removeSourceAccessProfile": "Удалить профиль доступа к источнику",
+ "retire": "Добавить устройство в список прекращения поддержки",
+ "wipe": "Очистка",
+ "emailNotification": "Отправить сообщение электронной почты пользователю"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Группы администраторов",
+ "RoleAssignmentAdminDesc": "Пользователи группы администраторов — это администраторы, которым назначена эта роль.",
+ "rolesMenuTitle": "Роли Endpoint Manager",
+ "RoleAssignmentScopeDesc": "Администраторы с этим назначением роли могут назначать политики, приложения и удаленные задачи",
+ "RoleAssignmentScope": "Группы области"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "Сведения о приложении",
"nameForOfficeSuitApp": "Сведения о наборе приложений"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "На Android можно разрешить использование идентификации по отпечатку пальца вместо ПИН-кода. Пользователям будет предложено предоставить свой отпечаток пальца при доступен к этому приложению с помощью рабочей учетной записи.",
- "iOS": "На устройствах iOS или iPadOS можно разрешить идентификацию с помощью отпечатка пальца вместо ПИН-кода. При открытии этого приложения с рабочей учетной записью пользователи будут получать запрос на предоставление отпечатков пальцев.",
- "mac": "На устройствах Mac можно разрешить идентификацию с помощью отпечатка пальца вместо ПИН-кода. При открытии этого приложения с рабочей учетной записью пользователи будут получать запрос на предоставление отпечатка."
- },
- "allowWidgetContentSync": "Выберите \"Блокировать\", чтобы запретить приложениям, управляемым политикой, сохранять данные в мини-приложениях приложений. Если вы выберете \"Разрешить\", приложение, управляемое политикой, сможет сохранять данные в мини-приложениях приложения, если эти функции поддерживаются и включены в приложении, управляемом политикой. \r\n\r\n \r\n\r\nПриложения могут предоставлять дополнительные возможности настройки с помощью политик конфигурации приложений. Дополнительные сведения см. в документации приложения.",
- "appSharingFromLevel1": "Выберите один из следующих вариантов, чтобы указать приложения, от которых это приложение может получать данные.",
- "appSharingFromLevel2": "{0}: разрешить получение данных из корпоративных документов и учетных записей только других управляемых политикой приложений.",
- "appSharingFromLevel3": "{0}: разрешить получение данных из корпоративных документов и учетных записей любого приложения.",
- "appSharingFromLevel4": "{0}: заблокировать получение данных из корпоративных документов и учетных записей любого приложения.",
- "appSharingFromLevel5": "{0}: разрешает передачу данных из любого приложения и учитывает все входящие данные, не имеющие удостоверения пользователя, как данные организации.",
- "appSharingToLevel1": "Выберите один из следующих вариантов, чтобы указать приложения, которым это приложение может отправлять данные.",
- "appSharingToLevel2": "{0}: разрешить отправку корпоративных данных только в другие управляемые политикой приложения.",
- "appSharingToLevel3": "{0}: разрешить отправку корпоративных данных в любые приложения.",
- "appSharingToLevel4": "{0}: заблокировать отправку корпоративных данных в любые приложения.",
- "appSharingToLevel5": "{0}: разрешает передачу данных только в другие управляемые политиками приложения и передачу файлов в управляемые приложения MDM на зарегистрированных устройствах.",
- "appSharingToLevel6": "{0}: разрешить передачу данных только в другие приложения, управляемые политикой, и фильтровать показ только управляемых политикой приложений в диалоговых окнах ОС \\\"Открыть в\\\"/\\\"Поделиться\\\".",
- "assignmentFilterEdit1": "При применении фильтров назначений к этой политике свойство \"Тип управления устройствами\" будет применяться дополнительно к значениям, указанным для параметров \"Поддержка приложений на любых типах устройств\" и \"Типы устройств\" на странице \"Приложения\".",
- "assignmentFilterEdit2": "Дополнительные сведения о назначении политик защиты приложений.",
- "conditionalEncryption1": "Выберите {0}, чтобы отключить шифрование приложений для внутреннего хранилища приложений, если на зарегистрированном устройстве обнаружено шифрование устройства.",
- "conditionalEncryption2": "Примечание. Intune может обнаружить регистрацию устройств только с помощью Intune MDM. Внешнее хранилище приложений будет по-прежнему зашифровано, чтобы неуправляемые приложения не могли получить доступ к данным.",
- "contactSyncMac": "Если этот параметр отключен, приложения не могут сохранять контакты в свою адресную книгу.",
- "contactsSync": "Выберите Заблокировать, чтобы запретить приложениям, управляемым политикой, сохранять данные в собственных приложениях устройства (например, в контактах, календаре и мини-приложениях) или запретить использование надстроек в приложениях, управляемых политикой. При выборе варианта Разрешить управляемое политикой приложение сможет сохранять данные в собственных приложениях или использовать надстройки, если эти функции поддерживаются и включены в приложении, управляемом политикой.
Приложения могут предоставлять дополнительную возможность настройки с помощью политик конфигурации приложений. Дополнительные сведения см. в документации приложения.",
- "deviceTypeTargetingCreate1": "Действие по определению типа устройства перемещено на шаг \"Назначения\" процесса создания политики.",
- "deviceTypeTargetingEdit1": "При применении фильтров назначений к этой политике свойство \"Тип управления устройствами\" будет применяться дополнительно к значениям, указанным для параметров \"Поддержка приложений на любых типах устройств\" и \"Типы устройств\" на странице \"Приложения\".",
- "deviceTypeTargetingEdit2": "Чтобы изменить определение типа управления устройствами, сбросьте параметр \"Поддержка приложений на любых типах устройств\" со значением \"Да\". Затем создайте фильтр назначения MAM с требуемыми значениями для свойства \"Тип управления устройствами\".",
- "deviceTypeTargetingHasMoved": "Дополнительные сведения о назначении политик защиты приложений",
- "encryptionAndroid1": "Для приложений, связанных с политикой управления мобильными приложениями Intune, шифрование обеспечивается средствами Майкрософт. Данные шифруются синхронно при выполнении операций ввода-вывода с файлами в соответствии с параметрами политики. Управляемые приложения Android используют шифрование AES-128 в режиме CBC с помощью библиотек платформы. Метод шифрования не соответствует стандарту FIPS 140-2. Шифрование SHA-256 поддерживается в виде явной инструкции с использованием параметра SigAlg и работает только на устройствах с операционной системой версии 4.2 и выше. Содержимое в хранилище устройства всегда зашифровано.",
- "encryptionAndroid2": "Когда в политике приложения указывается на необходимость шифрования, конечному пользователю необходимо настроить ПИН-код и использовать его для доступа к устройству. Если ПИН-код не настроен, приложение не запустится и конечный пользователь увидит следующее сообщение: \\\"По требованию вашей организации для доступа к приложению нужно сначала задать ПИН-код для устройства\\\".",
- "encryptionMac1": "Для приложений, связанных с политикой управления мобильными приложениями Intune, шифрование обеспечивается средствами Майкрософт. Данные шифруются синхронно при выполнении операций ввода-вывода с файлами в соответствии с параметрами политики. Управляемые приложения на Mac используют шифрование AES-128 в режиме CBC с помощью библиотек платформы. Метод шифрования не соответствует стандарту FIPS 140-2. Шифрование SHA-256 поддерживается в виде явной инструкции с использованием параметра SigAlg и работает только на устройствах с операционной системой версии 4.2 и выше. Содержимое в хранилище устройства всегда зашифровано.",
- "faceId1": "При необходимости вы можете разрешить пользователям доступ к этому приложению с рабочих учетных записей через идентификацию лиц вместо ПИН-кода.",
- "faceId2": "Выберите Да, чтобы разрешить использовать идентификацию лиц вместо ПИН-кода для доступа к приложению.",
- "managementLevelsAndroid1": "Этот параметр позволяет задать применение политики к устройствам администратора устройств Android, устройствам Android Enterprise или неуправляемым устройствам.",
- "managementLevelsAndroid2": "{0}: неуправляемые устройства — это устройства, на которых не найдено управление Intune MDM. Сюда входят сторонние поставщики MDM.",
- "managementLevelsAndroid3": "{0}: управление устройствами с помощью API администрирования устройств Android в Intune.",
- "managementLevelsAndroid4": "{0}: управление устройствами с рабочих профилей Android Enterprise или полное управление устройствами Android Enterprise в Intune.",
- "managementLevelsIos1": "Этот параметр позволяет указать, применяется ли эта политика к управляемым или неуправляемым устройствам MDM.",
- "managementLevelsIos2": "{0}: неуправляемые устройства — это устройства, на которых не найдено управление Intune MDM. Сюда входят сторонние поставщики MDM.",
- "managementLevelsIos3": "{0}: управляемые устройства управляются через Intune MDM.",
- "minAppVersion": "Укажите обязательную минимальную версию приложения, которая нужна пользователю для безопасного доступа к приложению.",
- "minAppVersionWarning": "Укажите рекомендуемую минимальную версию приложения, которая нужна пользователю для безопасного доступа к приложению.",
- "minOsVersion": "Укажите обязательную минимальную версию ОС, которая нужна пользователю для безопасного доступа к приложению.",
- "minOsVersionWarning": "Укажите рекомендуемую минимальную версию ОС, которая нужна пользователю для безопасного доступа к приложению.",
- "minPatchVersion": "Определите самый старый уровень исправлений для системы безопасности Android, допустимый для пользователя при безопасном доступе к приложению.",
- "minPatchVersionWarning": "Определите рекомендуемый уровень исправлений для системы безопасности Android для пользователя при безопасном доступе к приложению.",
- "minSdkVersion": "Укажите обязательную минимальную версию пакета SDK для политики защиты приложений Intune, которая нужна пользователю для безопасного доступа к приложению.",
- "requireAppPinDefault": "
Выберите Да, чтобы отключить ПИН-код приложения, если на зарегистрированном устройстве обнаружена блокировка.
",
- "targetAllApps1": "Этот параметр позволяет использовать политику как целевую в приложениях на устройствах с любым состоянием управления.",
- "targetAllApps2": "При разрешении конфликта политик этот параметр будет заменен, если у пользователя есть целевая политика для определенного состояния управления.",
- "touchId2": "Выберите {0}, чтобы для доступа к приложению требовалась идентификация с помощью отпечатка пальца вместо ПИН-кода."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Укажите количество дней, по истечении которых будет затребован сброс ПИН-кода.",
- "previousPinBlockCount": "Этот параметр определяет число предыдущих ПИН-кодов, которые будут храниться в Intune. Все новые ПИН-коды должны отличаться от тех, которые хранятся в Intune."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Это разрешит службе поиска Windows продолжить поиск в зашифрованных данных.",
- "authoritativeIpRanges": "Включите этот параметр, если хотите переопределить автообнаружение диапазонов IP-адресов Windows.",
- "authoritativeProxyServers": "Включите этот параметр, если хотите переопределить автообнаружение прокси-серверов Windows.",
- "checkInput": "Проверить допустимость входных данных",
- "dataRecoveryCert": "Сертификат восстановления — это специальный сертификат шифрованной файловой системы (EFS), который вы можете использовать для восстановления зашифрованных файлов при утере или повреждении ключа шифрования. Нужно создать сертификат восстановления и указать его здесь. Дополнительные сведения",
- "enterpriseCloudResources": "
Укажите облачные ресурсы, которые будут считаться корпоративными и защищаться политикой Windows Information Protection. Можно указать несколько ресурсов, разделив записи символом \\\"|\\\".
Если в вашей организации настроен прокси-сервер, вы можете указать прокси-сервер, через который будет направляться трафик в облачные ресурсы.
URL[,Proxy]|URL[,Proxy]
Без прокси-сервера: contoso.sharepoint.com|contoso.visualstudio.com С прокси-сервером: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Укажите диапазоны IPv4-адресов, которые формируют вашу корпоративную сеть. Они используются вместе с доменными именами корпоративной сети, определяющими границу корпоративной сети.
Для этого параметра нужно включить Windows Information Protection.
Можно указать несколько диапазонов, разделив их запятой.
Укажите диапазоны IPv6-адресов, которые формируют корпоративную сеть. Они используются вместе с доменными именами корпоративной сети, определяющими границу корпоративной сети.
Можно указать несколько диапазонов, разделив их запятой.
Если в вашей организации настроен прокси-сервер, укажите прокси-сервер, через который будет направляться трафик к облачным ресурсам, указанным в параметрах корпоративных облачных ресурсов.
Можно указать несколько значений, разделив их точкой с запятой.
Укажите DNS-имена, которые формируют вашу корпоративную сеть. Они используются вместе с диапазонами IP-адресов для определения границы корпоративной сети. Можно указать несколько значений, разделив их запятой.
Для этого параметра нужно включить Windows Information Protection.
Пример: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Укажите DNS-имена, которые формируют вашу корпоративную сеть. Они используются вместе с диапазонами IP-адресов, указанными для определения границ корпоративной сети. Можно указать несколько значений, разделив отдельные записи с помощью \\\"|\\\".
Этот параметр требуется для включения Windows Information Protection.
Пример: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
Если в вашей корпоративной сети внешние прокси-серверы, укажите их здесь. При указании адреса прокси-сервера нужно также указать порт, через который будет разрешено направлять трафик и защищать его с помощью Windows Information Protection.
Примечание. Этот список не должен включать серверы в списке внутренних прокси-серверов. Можно указать несколько значений, разделив их точкой с запятой.
",
- "maxInactivityTime1": "Указывает максимальное количество времени (в минутах) при простое до блокировки устройства с помощью ПИН-кода или пароля. Пользователи могут выбрать любое значение времени ожидания в пределах указанных максимальных значений в приложении \\\"Параметры\\\". Обратите внимание, что для Lumia 950 и 950XL максимальное время ожидания — пять минут независимо от значения, заданного политикой.",
- "maxInactivityTime2": "0 (по умолчанию) — время ожидания не задано. Значение по умолчанию \\\"0\\\" значит, что время ожидания не задано.",
- "maxPasswordAttempts1": "У этой политики разное поведение на мобильном устройстве и компьютере.",
- "maxPasswordAttempts2": "На мобильном устройстве, когда пользователь достигает значения, заданного политикой, происходит очистка устройства.",
- "maxPasswordAttempts3": "На компьютере, когда пользователь достигает значения, заданного политикой, очистка устройства не выполняется. Вместо этого компьютер переходит в режим восстановления BitLocker, в котором данные недоступны, но их можно восстановить. Если BitLocker не включен, политику невозможно применить.",
- "maxPasswordAttempts4": "Перед достижением предельного числа неудачных попыток пользователь переходит на экран блокировки и получает предупреждение, что компьютер будет заблокирован. При достижении предельного числа попыток устройство автоматически перезагрузится и откроет страницу восстановления BitLocker. На этой странице пользователь получит приглашение указать ключ восстановления BitLocker.",
- "maxPasswordAttempts5": "0 (по умолчанию) — устройство не очищается после ввода неправильного ПИН-кода или пароля.",
- "maxPasswordAttempts6": "Самое безопасное значение — 0, если все значения политики равны нулю. В противном случае самое безопасное значение — минимальное значение политики.",
- "mdmDiscoveryUrl": "Укажите URL-адрес конечной точки регистрации MDM, с помощью которого пользователи будут регистрироваться в MDM. По умолчанию он указывается для Intune.",
- "minimumPinLength1": "Целое значение, которое задает минимальное число символов ПИН-кода. Значение по умолчанию — 4. Наименьшее число, которое можно указать для этого параметра политики — 4. Наибольшее число должно быть меньше указанного в параметре \\\"Максимальная длина ПИН-кода\\\" или равно числу 127 в зависимости от того, что окажется меньше.",
- "minimumPinLength2": "Если вы настроите этот параметр политики, длина ПИН-кода должна быть не меньше этого числа. Если вы отключите или не настроите этот параметр, длина ПИН-кода должна быть не меньше четырех символов.",
- "name": "Имя границы сети",
- "neutralResources": "
Если в вашей организации есть конечные точки перенаправления проверки подлинности, укажите их здесь. Указанные расположения считаются личными или корпоративными в зависимости от контекста подключения перед перенаправлением.
Можно указать несколько значений, разделив их запятой.
Пример: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Значение, которое задает Windows Hello для бизнеса в качестве способа входа в Windows.",
- "passportForWork2": "Значение по умолчанию — ИСТИНА. Если для этой политики установлено значение ЛОЖЬ, пользователь не сможет подготовить Windows Hello для бизнеса, за исключением мобильных телефонов, подключенных к Microsoft Entra, где требуется подготовка.",
- "pinExpiration": "Наибольшее число, которое можно указать для политики, — 730, а наименьшее — 0. Если задан параметр политики 0, ПИН-код бессрочный.",
- "pinHistory1": "Наибольшее число, которое можно указать для политики, — 50, а наименьшее — 0. Если задан параметр политики 0, хранение предыдущих ПИН-кодов не требуется.",
- "pinHistory2": "Текущий ПИН-код пользователя включен в набор ПИН-кодов, связанных с учетной записью пользователя. Журнал ПИН-кодов не сохраняется после сброса ПИН-кода.",
- "protectUnderLock": "Защищает содержимое приложения, когда устройство заблокировано.",
- "protectionModeBlock": "
Блокировать: блокирует перемещение корпоративных данных из защищенных приложений.
",
- "protectionModeOff": "
Отключено. Пользователь может перемещать данные из защищенных приложений. Действия не записываются в журнал.
",
- "protectionModeOverride": "
Разрешить переопределения. Пользователь получает запрос при попытке переместить данные из защищенного приложения в незащищенное. Если он отклонит этот запрос, действие будет записано в журнал.
",
- "protectionModeSilent": "
Автоматически. Пользователь может перемещать данные из защищенных приложений. Эти действия записываются в журнал.
",
- "required": "Обязательно",
- "revokeOnMdmHandoff": "Добавлена в Windows 10 версии 1703. Эта политика контролирует отзыв ключей WIP при обновлении устройства с MAM до MDM. Если она отключена, ключи не будут отозваны и пользователь сохранит доступ к защищенным файлам после обновления. Это рекомендуемый режим, если в службе MDM настроен тот же EnterpriseID WIP, что и в службе MAM.",
- "revokeOnUnenroll": "Ключи шифрования будут отозваны при отмене регистрации устройства в политике.",
- "rmsTemplateForEdp": "GUID TemplateID, который используется для шифрования RMS. Шаблон Azure RMS позволяет ИТ-администратору настроить сведения о том, у кого есть доступ к файлу, защищенному RMS, и длительность этого доступа.",
- "showWipIcon": "Это позволит пользователю узнать, когда он выступает от лица организации, путем наложения значка.",
- "useRmsForWip": "Указывает, следует ли разрешить шифрование Azure RMS для WIP."
- },
- "requireAppPin": "
Выберите Да, чтобы отключить ПИН-код приложения, если на зарегистрированном устройстве обнаружена блокировка.
Примечание. Intune не может обнаружить регистрацию устройств в стороннем решении EMM в iOS или iPadOS.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "Установка приложения может привести к перезапуску устройства",
- "basedOnReturnCode": "Определять режим по кодам возврата",
- "force": "Intune выполнит принудительную перезагрузку устройства",
- "suppress": "Никаких действий выполняться не будет"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Требуемое время установки (в минутах)",
- "maxRunTimeInMinutesToolTip": "Количество минут, в течение которого система будет ожидать завершения установки программы. Значение по умолчанию — 60 минут."
- },
- "RunAsAccountOptions": {
- "system": "Система",
- "user": "Пользователь"
- },
- "availableUninstall": "Разрешить доступное удаление",
- "availableUninstallTooltip": "Выберите \"Да\", чтобы предоставить пользователям возможность удаления этого приложения с Корпоративного портала. Выберите \"Нет\", чтобы запретить пользователям удалять приложение с Корпоративного портала.",
- "bladeTitle": "Программа",
- "deviceRestartBehavior": "Действие при перезагрузке устройства",
- "deviceRestartBehaviorTooltip": "Выберите режим перезагрузки устройства после успешной установки приложения. Выберите \"Определять режим по кодам возврата\", чтобы перезагрузить устройство на основе параметров конфигурации кодов возврата. Выберите \"Никаких действий выполняться не будет\" для подавления перезагрузки устройства во время установки приложения на основе MSI. Выберите \"Установка приложения может принудительно выполнить перезагрузку устройства\", чтобы позволить установке приложения завершиться без подавления перезагрузок. Выберите \"Intune выполнит принудительную перезагрузку устройства\", чтобы всегда перезагружать устройство после успешной установки приложения.",
- "header": "Укажите команды для установки и удаления этого приложения:",
- "installCommand": "Команда установки",
- "installCommandMaxLengthErrorMessage": "Длина команды установки не может превышать допустимый максимум в 1024 символа.",
- "installCommandTooltip": "Командная строка завершения установки, используемая для установки этого приложения.",
- "runAs32Bit": "Запуск команд установки и удаления в 32-разрядном процессе на 64-разрядных клиентах",
- "runAs32BitTooltip": "Выберите \"Да\" для установки и удаления приложения в 32-разрядном процессе на 64-разрядных клиентах. Выберите \"Нет\" (по умолчанию) для установки и удаления приложения в 64-разрядном процессе на 64-разрядных клиентах. 32-разрядные клиенты всегда будут использовать 32-разрядный процесс.",
- "runAsAccount": "Поведение при установке",
- "runAsAccountTooltip": "Выберите \"Система\", чтобы установить приложение для всех пользователей, если это поддерживается. Выберите \"Пользователь\", чтобы установить приложение для пользователя, выполнившего вход на устройстве. В приложениях MSI двойного назначения внесение изменений сделает невозможным установку обновлений и удаление, пока не будет восстановлено значение, использованное на устройстве при первоначальной установке.",
- "selectorLabel": "Программа",
- "uninstallCommand": "Команда удаления",
- "uninstallCommandTooltip": "Командная строка завершения удаления, используемая для удаления этого приложения."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Создать",
- "createNewResourceAccountInfo": "
\r\nСоздание новой учетной записи ресурса во время регистрации. Учетная запись ресурса будет добавлена в таблицу учетных записей ресурсов сразу же, но будет неактивна до регистрации устройства и проверки подписки Surface Hub. Подробнее об учетных записях ресурсов.
\r\n ",
- "createNewResourceTitle": "Создание учетной записи ресурса",
- "deviceNameInvalid": "Имя устройства имеет недопустимый формат",
- "deviceNameRequired": "Требуется имя устройства",
- "editResourceAccountLabel": "Изменить",
- "selectExistingCommandMenu": "Выбрать существующую"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "Имена должны быть длиной до 15 символов и могут включать буквы (a–z, A–Z), цифры (0–9) и дефисы. Имена только из цифр недопустимы, и они не могут включать пробелы."
- },
- "Header": {
- "addressableUserName": "Понятное имя",
- "azureADDevice": "Связанное устройство Microsoft Entra",
- "batch": "Тег группы",
- "dateAssigned": "Дата назначения",
- "deviceAccountPwd": "Пароль учетной записи устройства",
- "deviceAccountUpn": "Учетная запись устройства",
- "deviceDisplayName": "Имя устройства",
- "deviceFriendlyName": "Понятное имя устройства",
- "deviceName": "имя устройства.",
- "deviceUseType": "Тип использования устройства",
- "enrollmentState": "Состояние регистрации",
- "intuneDevice": "Связанное устройство Intune",
- "lastContacted": "Последнее обращение",
- "make": "Изготовитель",
- "model": "Модель",
- "profile": "Присвоенный профиль",
- "profileStatus": "Состояние профиля",
- "purchaseOrderId": "Заказ на поставку",
- "resourceAccount": "Учетная запись ресурса",
- "serialNumber": "серийный номер;",
- "userPrincipalName": "Пользователь"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Требуется понятное имя",
- "pwdRequired": "Требуется пароль",
- "pwdValidFormat": "Не удалось обновить пароль. Значение, указанное для нового пароля, не соответствует требованиям домена к длине или сложности.",
- "upnRequired": "Требуется учетная запись устройства",
- "upnValidFormat": "Значения могут содержать буквы (a–z, A–Z), цифры (0–9) и дефисы. Значения не могут содержать пробел."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Собрания и презентации",
- "teamCollaboration": "Совместная работа в команде"
- },
- "Devices": {
- "featureDescription": "Windows Autopilot позволяет настроить запуск при первом включении компьютера для пользователей.",
- "importErrorStatus": "Некоторые устройства не были импортированы. Щелкните здесь, чтобы получить дополнительные сведения.",
- "importPendingStatus": "Идет импорт. Затраченное время: {0} мин. Процесс может занять до {1} мин."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Гибридное соединение Microsoft Entra",
- "activeDirectoryADLabel": "Гибридное присоединение к Microsoft Entra с Autopilot",
- "azureAD": "Присоединение к Microsoft Entra",
- "unknownType": "Неизвестный тип"
- },
- "Filter": {
- "enrollmentState": "Состояние",
- "profile": "Состояние профиля"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "Понятное имя пользователя не может быть пустым."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Создайте шаблон именования, чтобы добавить имена устройств во время регистрации.",
- "label": "Применить шаблон имени устройства"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "В профилях развертывания Autopilot с гибридным присоединением к Microsoft Entra устройства именуются согласно параметрам, указанным в конфигурации присоединения к домену."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MyCompany-%RAND:4%",
- "label": "Ввод имени",
- "noDisallowedChars": "Имя должно включать только буквы, цифры, дефисы и макросы %SERIAL% или %RAND:x%",
- "serialLength": "При использовании %SERIAL% допустимо не больше 7 символов",
- "validateLessThan15Chars": "В имени должно быть не больше 15 символов",
- "validateNoSpaces": "В именах компьютеров не должно быть пробелов",
- "validateNotAllNumbers": "Имя должно также включать буквы и (или) дефисы",
- "validateNotEmpty": "Имя не может быть пустым",
- "validateOnlyOneMacro": "В имени может быть только один макрос %SERIAL% или %RAND:x%"
+ "ScopeTypes": {
+ "allDevices": "Все устройства",
+ "allUsers": "Все пользователи",
+ "allUsersAndDevices": "Все пользователи и все устройства",
+ "selectedGroups": "Выбранные группы"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Описание",
+ "placeholder": "Введите описание"
+ },
+ "NameTextBox": {
+ "label": "Имя",
+ "placeholder": "Ввод имени"
+ },
+ "PublisherTextBox": {
+ "label": "Издатель",
+ "placeholder": "Введите издателя"
+ },
+ "VersionTextBox": {
+ "label": "Версия"
+ },
+ "headerDescription": "Создайте новый настраиваемый пакет сценариев на основе написанных вами сценариев обнаружения и исправления."
},
- "ConfigureComputerNameTemplate": {
- "description": "Создайте уникальное имя для своих устройств. Имена должны быть длиной до 15 символов и могут включать буквы (a — z, A — Z), цифры (0–9) и дефисы. Имена только из цифр недопустимы, и они не могут включать пробелы. Используйте макрос %SERIAL%, чтобы добавить уникальный серийный номер оборудования, или макрос %RAND:x%, чтобы добавить случайную строку цифр, где x — количество этих цифр."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Включите функцию запуска при первом включении компьютера (OOBE) без проверки подлинности пользователя. Чтобы включить интерфейс OOBE, нужно нажать клавишу Windows пять раз. Устройство будет зарегистрировано, а также будут подготовлены все приложения и параметры в контексте локального компьютера. Приложения и параметры в контексте пользователя будут доставлены, когда пользователь выполнит вход в систему.",
- "label": "Разрешить предварительно подготовленное развертывание"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Поток Autopilot гибридного присоединения к Microsoft Entra продолжит работу, даже если ему не удастся установить подключение к контроллеру домена во время запуска при первом включении компьютера.",
- "label": "Пропустить проверку подключения AD"
- },
- "accountType": "Тип учетной записи пользователя",
- "accountTypeInfo": "Укажите, являются ли пользователи администраторами или обычными пользователями на устройстве. Обратите внимание, что этот параметр не применяется к учетным записям глобального администратора или администратора организации. Эти учетные записи не могут быть обычными пользователями, так как они имеют доступ ко всем возможностям администрирования в Microsoft Entra ID.",
- "configOOBEInfo": "
\r\nНастройка готового интерфейса для устройств Autopilot\r\n
",
- "configureDevice": "Режим развертывания",
- "configureDeviceHintForSurfaceHub2": "Autopilot поддерживает режим самостоятельного развертывания только для Surface Hub 2. Этот режим не связывает пользователя с зарегистрированным устройством, поэтому для него не требуются учетные данные пользователя.",
- "configureDeviceHintForWindowsPC": "
\r\n Режим развертывания указывает, нужно ли пользователю вводить учетные данные, чтобы подготовить устройство.\r\n
\r\n
\r\n
\r\n Под управлением пользователя: устройства связываются с пользователем, регистрирующим устройство. Для подготовки устройства требуются учетные данные.\r\n
\r\n
\r\n Самостоятельное развертывание (предварительная версия): устройства не связываются с регистрирующим пользователем, и учетные данные не требуются для подготовки устройства.\r\n
\r\n
",
- "createSurfaceHub2Info": "Настройте параметры регистрации Autopilot для устройств Surface Hub 2. По умолчанию в Autopilot включен пропуск проверки подлинности пользователей при первом включении (OBEE). Дополнительные сведения о Windows Autopilot для Surface Hub 2.",
- "createWindowsPCInfo": "\r\n
\r\nСледующие параметры автоматически включаются для устройств Autopilot в режиме самостоятельного развертывания.\r\n
\r\n
\r\n
\r\n Пропустить выбор рабочего или домашнего использования.\r\n
\r\n
\r\n Пропустить регистрацию OEM и настройку OneDrive.\r\n
\r\n
\r\n Пропустить проверку подлинности в OOBE.\r\n
\r\n
",
- "endUserDevice": "Под управлением пользователя",
- "hideEscapeLink": "Скрыть параметры изменения учетной записи",
- "hideEscapeLinkInfo": "Функции смены учетной записи и перезапуска с новой отображаются соответственно при начальной настройке устройства на корпоративной странице входа и на странице ошибки домена. Чтобы скрыть эти функции, настройте корпоративную фирменную символику в Microsoft Entra ID (требуется Windows 10 не ниже версии 1809 или Windows 11).",
- "info": "Параметры профиля AutoPilot позволяют задать готовую конфигурацию, которую пользователи получат при первом запуске Windows. ",
- "language": "Язык (регион)",
- "languageInfo": "Укажите язык и регион, которые будут использоваться.",
- "licenseAgreement": "Условия лицензионного соглашения корпорации Майкрософт",
- "licenseAgreementInfo": "Укажите, следует ли показывать условия лицензии пользователям.",
- "plugAndForgetDevice": "Самостоятельное развертывание",
- "privacySettingWarning": "Изменено значение по умолчанию для сбора диагностических данных на устройствах под управлением Windows 10 версии 1903 и более поздних версий или Windows 11. ",
- "privacySettings": "Настройки приватности",
- "privacySettingsInfo": "Укажите, следует ли показывать пользователям параметры конфиденциальности.",
- "showCortanaConfigurationPage": "Настройка Кортаны",
- "showCortanaConfigurationPageInfo": "Вариант \"Показать\" включит введение в настройку Кортаны во время запуска.",
- "skipEULAWarning": "Важные сведения о скрытии условий лицензии",
- "skipKeyboardSelection": "Автоматически настроить клавиатуру",
- "skipKeyboardSelectionInfo": "Если значение равно True, пропускать страницу выбора клавиатуры, когда задан параметр \"Язык\".",
- "subtitle": "Профили AutoPilot",
- "title": "Готовый интерфейс (OOBE)",
- "useOSDefaultLanguage": "Значение ОС по умолчанию",
- "userSelect": "Выбор пользователя"
- },
- "Sync": {
- "lastRequestedLabel": "Последний запрос синхронизации",
- "lastSuccessfulLabel": "Последняя успешная синхронизация",
- "syncInProgress": "Выполняется синхронизация. Вернитесь чуть позже.",
- "syncInitiated": "Запущена синхронизация параметров AutoPilot.",
- "syncSettingsTitle": "Синхронизация параметров AutoPilot"
- },
- "Title": {
- "devices": "Устройства Windows AutoPilot"
- },
- "Tooltips": {
- "addressableUserName": "Имя пользователя в приветствии, которое отображается во время настройки устройства.",
- "azureADDevice": "Перейдите к сведениям о связанном устройстве. \"Н/Д\" означает, что связанное устройство отсутствует.",
- "batch": "Строковый атрибут, позволяющий идентифицировать группу устройств. Поле \"Тег группы\" в Intune сопоставляется с атрибутом OrderID на устройствах Microsoft Entra ID.",
- "dateAssigned": "Временная метка назначения профиля устройству.",
- "deviceAccountPwd": "Пароль учетной записи для устройств Surface Hub. Если он указан, также введите учетную запись устройства и понятное имя.",
- "deviceAccountUpn": "Адрес электронной почты учетной записи для устройств Surface Hub. Если он указан, также введите пароль учетной записи устройства и понятное имя.",
- "deviceDisplayName": "Задайте уникальное имя для устройства. Это имя будет игнорироваться в развертываниях с гибридным присоединением к Microsoft Entra, где по-прежнему используется имя устройства из профиля присоединения к домену.",
- "deviceFriendlyName": "Понятное имя для устройств Surface Hub. Если оно указано, также введите учетную запись устройства и пароль учетной записи устройства.",
- "deviceName": "Имя, отображаемое при попытке пользователя обнаружить устройство и подключиться к нему.",
- "deviceUseType": " Устройство будет настроено в соответствии с вашим выбором. Вы всегда можете изменить параметры позже.\r\n
\r\n
Для собраний и презентаций Windows Hello не включен, и данные удаляются после каждого сеанса.\r\n
\r\n
Для совместной работы команды Windows Hello включен, и профили сохраняются для быстрого входа.
\r\n
",
- "enrollmentState": "Указывает, зарегистрировано ли устройство.",
- "intuneDevice": "Перейдите к сведениям о связанном устройстве. \"Н/Д\" означает, что связанное устройство отсутствует.",
- "lastContacted": "Временная метка последнего обращения к устройству.",
- "make": "Изготовитель выбранного устройства.",
- "model": "Модель выбранного устройства",
- "profile": "Имя профиля, назначенного устройству.",
- "profileStatus": "Указывает, назначен ли профиль устройству.",
- "purchaseOrderId": "Идентификатор заказа на покупку",
- "resourceAccount": "Удостоверение устройства или имя субъекта-пользователя (UPN).",
- "serialNumber": "Серийный номер выбранного устройства.",
- "userPrincipalName": "Пользователь, который должен выполнить проверку подлинности при настройке устройства."
- },
- "allDevices": "Все устройства",
- "allDevicesAlreadyAssignedError": "Профиль Autopilot уже назначен всем устройствам.",
- "assignFailedDescription": "Не удалось изменить назначения для {0}.",
- "assignFailedTitle": "Не удалось изменить назначения профилей AutoPilot.",
- "assignSuccessDescription": "Назначения для {0} успешно изменены.",
- "assignSuccessTitle": "Назначения профиля AutoPilot изменены.",
- "assignSufaceHub2ProfileNextStep": "Следующие шаги для этого развертывания",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Назначьте этот профиль по крайней мере одной группе устройств.",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Назначьте учетную запись ресурса каждому устройству Surface Hub, на которое вы разворачиваете этот профиль.",
- "assignedDevicesCount": "Назначенные устройства",
- "assignedDevicesResourceAccountDescription": "
Для развертывания этого профиля на устройстве необходимо назначить устройству учетную запись ресурса. Выберите одно устройство, чтобы назначить существующую учетную запись ресурса или создать новую. Подробнее об учетных записях ресурсов
",
- "assignedDevicesResourceAccountStatusBarMessage": "В этой таблице перечислены только устройства Surface Hub 2, которым был назначен этот профиль.",
- "assigningDescription": "Изменяются назначения для {0}.",
- "assigningTitle": "Изменяются назначения профилей AutoPilot.",
- "autoremediationContext": "Обнаружено изменение оборудования на этом устройстве. Мы пытаемся автоматически зарегистрировать новое оборудование. Вам не нужно ничего делать сейчас; состояние будет обновлено при следующей проверке с результатом. Дополнительные сведения о сбросе профиля.",
- "autoremediationTitle": "В устройстве {0} есть ожидающее исправление",
- "cannotDeleteMessage": "Этот профиль назначен группам. Отмените назначение всех групп в этом профиле, прежде чем удалить его.",
- "cannotDeleteTitle": "Невозможно удалить {0}",
- "createdDateTime": "Создано",
- "deleteMessage": "Если удалить этот профиль AutoPilot, для всех устройств, которым он назначен, будет отображаться \"Не назначено\".",
- "deleteMessageWithPolicySet": "Профиль {0} включен как минимум в один набор политик. Если вы удалите {0}, вы больше не сможете назначать его через эти наборы.",
- "deleteTitle": "Вы действительно хотите удалить этот профиль?",
- "description": "Описание",
- "deviceType": "Тип устройства",
- "deviceUse": "Использование устройства",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot поддерживает присоединение к Microsoft Entra только для устройств Surface Hub 2. Укажите, как устройства присоединяются к Active Directory (AD) в вашей организации.\r\n
\r\n
\r\n
\r\n Присоединено к Microsoft Entra: только облако без локальной службы Windows Server Active Directory.\r\n
\r\n Укажите, как устройства присоединяются к Active Directory (AD) в вашей организации:\r\n
\r\n
\r\n
\r\n Присоединено к Microsoft Entra: только облако без локальной службы Windows Server Active Directory\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Произошла ошибка при извлечении числа назначенных устройств.",
- "getAssignmentsError": "Произошла ошибка при извлечении назначений профиля AutoPilot.",
- "harvestDeviceId": "Преобразовать все целевые устройства в Autopilot",
- "harvestDeviceIdDescription": "По умолчанию этот профиль можно применить только к устройствам Autopilot, синхронизированным в службе Autopilot.",
- "harvestDeviceIdInfo": "\r\n Выберите \"Да\", чтобы зарегистрировать все целевые устройства в Autopilot, если они еще не зарегистрированы. Назначенный сценарий Autopilot будет выполнен для них в следующий раз при процедуре первого включения компьютера (OOBE) с Windows.\r\n \r\n Обратите внимание, что для некоторых сценариев Autopilot требуются определенные минимальные версии сборок Windows. Проверьте наличие на устройстве требуемой минимальной версии сборки для нужного сценария.\r\n \r\n При удалении этого профиля связанные устройства не будут удалены из Autopilot. Для удаления устройства из Autopilot воспользуйтесь представлением \"Устройства Windows Autopilot\".\r\n ",
- "harvestDeviceIdWarning": "После преобразования устройства Autopilot можно восстановить, только удалив их из списка устройств Autopilot.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Профили развертывания Windows AutoPilot позволяют настроить конфигурацию запуска при первом включении для ваших устройств.",
- "invalidProfileNameMessage": "Символ \"{0}\" не допускается",
- "joinTypeLabel": "Присоединиться к Microsoft Entra ID как",
- "lastModifiedDateTime": "Последнее изменение:",
- "manualRemediationContext": "Обнаружено изменение оборудования на этом устройстве. Устройство не получит автоматически профиль Autopilot при сбросе без повторной регистрации устройства. Дополнительные сведения о сбросе профиля.",
- "manualRemediationTitle": "Устройство {0} требует вашего внимания",
- "name": "Имя",
- "noAutopilotProfile": "Нет профилей AutoPilot",
- "notEnoughPermissionAssignedError": "У вас нет необходимых разрешений для назначения этого профиля некоторым из выбранных групп. Обратитесь к администратору.",
- "profile": "профиль",
- "resourceAccountStatusBarMessage": "Учетная запись ресурса необходима для каждого устройства Surface Hub 2, на котором развертывается этот профиль. Щелкните для получения дополнительных сведений.",
- "selectServices": "Выберите службу каталогов, к которой будут присоединены устройства",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Режим развертывания",
- "windowsPCCommandMenu": "Компьютер с Windows",
- "directoryServiceLabel": "Присоединиться к Microsoft Entra ID как"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Группы администраторов",
- "RoleAssignmentAdminDesc": "Пользователи группы администраторов — это администраторы, которым назначена эта роль.",
- "rolesMenuTitle": "Роли Endpoint Manager",
- "RoleAssignmentScopeDesc": "Администраторы с этим назначением роли могут назначать политики, приложения и удаленные задачи",
- "RoleAssignmentScope": "Группы области"
- },
+ "ScopeTags": {
+ "headerDescription": "Выберите группы для назначения пакета сценариев."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Сценарий обнаружения",
+ "placeholder": "Введите текст сценария",
+ "requiredValidationMessage": "Введите сценарий обнаружения"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Принудительно проверить подпись сценария"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Запуск сценария с использованием текущих учетных данных"
+ },
+ "RemediationScript": {
+ "infoBox": "Этот сценарий будет выполняться в режиме только обнаружения, поскольку сценарий исправления отсутствует."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Сценарий исправления",
+ "placeholder": "Введите текст сценария"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Запуск сценария в 64-разрядной версии PowerShell"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Недопустимый сценарий. Один или несколько символов, используемых в сценарии, являются недопустимыми."
+ },
+ "headerDescription": "Создание настраиваемого пакета сценариев на основе написанных сценариев. По умолчанию сценарии будут выполняться на назначенных устройствах каждый день.",
+ "infoBox": "Этот скрипт доступен только для чтения. Возможно, некоторые параметры этого скрипта отключены."
+ },
+ "title": "Создание настраиваемого сценария",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Интервал",
+ "time": "Дата и время"
+ },
+ "Interval": {
+ "day": "Повторяется каждый день",
+ "days": "Повторяется каждые {0} дн.",
+ "hour": "Повторяется каждый час",
+ "hours": "Повторять через каждые {0} часов",
+ "month": "Повторяется каждый месяц",
+ "months": "Повторяется каждые {0} мес.",
+ "week": "Повторяется каждую неделю",
+ "weeks": "Повторяется каждые {0} нед."
+ },
+ "Time": {
+ "utc": "{0} (время в формате UTC)",
+ "utcWithDate": "{0} (UTC) {1}",
+ "withDate": "{0} {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Изменить — {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Не удается блокировать только выбранные приложения на этапе технического обслуживания",
- "apps": "приложения",
- "appsListName": "Список приложений",
- "blockingApps": "Блокировка приложений",
- "managedApps": "Управляемые приложения",
- "noApps": "Нет приложений",
- "noAppsError": "Ошибка при получении приложений.",
- "selectApps": "Выбрать приложения",
- "selectedAppsCount": "Выбрано приложений: {0} (максимум 100)",
- "useSelectedAppsAll": "Все",
- "useSelectedAppsSelected": "Выбрано",
- "useSelectedAppsToggleLabel": "Блокировать использование устройства до тех пор, пока не будут установлены необходимые приложения, если они назначены пользователю или устройству."
- },
- "Header": {
- "application": "Приложение",
- "publisher": "Издатель",
- "version": "Версия"
- },
- "SearchBox": {
- "ariaLabel": "Поиск приложений",
- "placeHolder": "Поиск по имени или издателю"
- },
- "allowToUseToggle": "Разрешить пользователям использовать устройство при ошибке установки",
- "blockToggle": "Блокировать использование устройства до установки всех приложений и профилей",
- "blockToolTip": "Например, если добавить Microsoft Word в этот список, целевые пользователи и устройства не смогут покинуть страницу состояния регистрации, пока Word не будет установлен.",
- "collectLogToggle": "Включить сбор журналов и страницу диагностики для конечных пользователей",
- "create": "Создание профиля",
- "customMessageTextBox": "Сообщение об ошибке",
- "customMessageToggle": "Показывать пользовательское сообщение при достижении ограничения по времени или возникновении ошибки",
- "enableForAutopilotOnlyToggle": "Показывать только страницы для устройств, подготовленных при запуске во время первого включения компьютера",
- "installQualityUpdatesToggle": "Установите обновления качества Windows (может перезагрузить устройство) (предварительная версия)",
- "progressToggle": "Отобразить ход настройки приложений и профилей",
- "resetToggle": "Разрешить пользователям сбросить параметры устройства при ошибке установки",
- "timeout": "Отобразить ошибку, если установка занимает больше указанного времени в минутах"
- },
+ "OfficeUpdateChannel": {
+ "current": "Текущий канал",
+ "deferred": "Полугодовой канал (корпоративный)",
+ "firstReleaseCurrent": "Текущий канал (предварительная версия)",
+ "firstReleaseDeferred": "Полугодовой канал (предварительная корпоративная версия)",
+ "monthlyEnterprise": "Ежемесячный канал Enterprise",
+ "placeHolder": "Выберите один вариант"
+ },
"TableHeaders": {
"activity": "Действие",
"activityName": "Имя действия",
@@ -1293,30 +417,175 @@
"excludedGroups": "Исключенные группы",
"licenseType": "Тип лицензии"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Настройте требования к ПИН-коду и учетным данным, которым должны следовать пользователи для доступа к приложениям в рабочем контексте."
- },
- "DataProtection": {
- "infoText": "Эта группа включает элементы управления Защиты от потери данных (DLP), такие как ограничение на вырезание, копирование, вставку и сохранение. Эти параметры определяют, как пользователи взаимодействуют с данными в приложениях."
- },
- "DeviceTypes": {
- "selectOne": "Выберите хотя бы один тип устройства."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Поддержка приложений на любых типах устройств"
- },
- "infoText": "Выберите способ применения этой политики к приложениям на различных устройствах. Затем добавьте хотя бы одно приложение.",
- "selectOne": "Выберите по меньшей мере одно приложение, чтобы создать политику."
- }
- },
- "AssignmentAction": {
- "exclude": "Исключенные",
- "include": "Включено",
- "includeAllDevicesVirtualGroup": "Включено",
- "includeAllUsersVirtualGroup": "Включено"
- },
+ "Inputs": {
+ "accountDomain": "Домен учетной записи",
+ "accountDomainHint": "Например, contosodomain",
+ "accountDomainInfoBalloon": "Укажите домен учетной записи пользователя.",
+ "accountTypeInfoBalloon": "Укажите тип настраиваемой учетной записи на основе модели проверки подлинности",
+ "allowContactSetting": "Разрешить пользователю изменять параметр контактов",
+ "allowContactSyncInfoBalloon": "Укажите, разрешено ли пользователю изменять параметр синхронизации контактов",
+ "allowUserChange": "Разрешить пользователю менять настройку",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Введите имя пакета, например com.microsoft.word",
+ "androidUrlValidation": "Введите допустимый URL-адрес, подобный следующему: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en.",
+ "appInstallContext": "Контекст установки приложения",
+ "appUrlLabel": "URL-адрес Appstore",
+ "appleUrlValidation": "Введите допустимый URL-адрес, аналогичный следующему: https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8.",
+ "applicableDeviceType": "Применимый тип устройств",
+ "assignmentActionLabel": "Режим",
+ "authenticationMethodInfoBalloon": "Укажите способ проверки подлинности пользователя",
+ "authenticationMetod": "Способ проверки подлинности",
+ "authenticationType": "Тип проверки подлинности",
+ "authenticationTypeInfoBalloon": "Укажите тип проверки подлинности пользователя",
+ "availableLicenseCount": "Доступные лицензии",
+ "basicAuth": "Обычная проверка подлинности",
+ "biometricsInfoBalloon": "Для доступа пользователей к приложению на устройстве можно требовать биометрические данные, такие как TouchID или FaceID. Они запрашиваются в дополнение к методу проверки подлинности, выбранному в профиле. Не включайте эту функцию при наличии развернутых политик Защиты приложений Intune, так как они уже содержат требования доступа к управляемым данным. При использовании обеих функций будет возникать множество запросов на доступ к мобильному приложению Outlook. Если не настроить эту функцию, по умолчанию она будет для приложения отключена. ",
+ "bookNameLabel": "Имя книги",
+ "bundleDescriptionHint": "Введите описание, которое соответствует включаемым приложениям.",
+ "calendar": "Календарь",
+ "categoryLabel": "Категория",
+ "categoryNameLabel": "Имя по умолчанию",
+ "certProfileType": "Тип профиля сертификата",
+ "certificate": "Сертификат",
+ "certificates": "Сертификаты",
+ "commandLineLabel": "Аргументы командной строки",
+ "commandLineSizeHint": "Максимальная длина аргументов командной строки — 1024 символа.",
+ "configurationSettingsFormatLabel": "Формат параметров конфигурации",
+ "configurationSettingsLabel": "Формат параметров",
+ "contactSync": "Сохранить контакты",
+ "contactSyncInfoBalloon": "При сохранении контактов в собственную адресную книгу мобильного устройства новые звонки и SMS будут связываться с существующими пользовательскими контактами Outlook. Если не настроить эту функцию, по умолчанию она будет для приложения отключена.",
+ "contacts": "Контакты",
+ "createdDateTime": "Создано",
+ "defaultCategoryHint": "Категории по умолчанию невозможно изменить",
+ "deploySMimeCertsFromIntune": "Развертывание сертификатов S/MIME из Intune",
+ "descriptionGenericLabel": "Описание",
+ "descriptionHint": "Введите описание...",
+ "descriptionLabel": "Описание",
+ "descriptionSizeHint": "Описание не может быть длиннее 10 000 символов.",
+ "developerLabel": "Разработчик",
+ "developerSizeHint": "Максимальная длина имени разработчика — 256 символов.",
+ "disable": "Отключить",
+ "disabled": "Отключено",
+ "displayNameLabel": "Имя",
+ "displayVersionHint": "Введите версию проекта",
+ "displayVersionLabel": "Версия приложения",
+ "displayVersionLengthCheck": "Длина версии просмотра не должна превышать 130 символов",
+ "eBookCategoryNameLabel": "Имя по умолчанию",
+ "emailAccount": "Имя учетной записи электронной почты",
+ "emailAccountHint": "например, корпоративная электронная почта",
+ "emailAccountInfoBalloon": "Укажите отображамое имя учетной записи электронной почты, которое появится на устройствах пользователей",
+ "emailAddressAttribute": "Атрибут адреса электронной почты из Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Укажите адрес электронной почты, который будет использоваться для отправки и получения почты",
+ "emailServer": "Сервер электронной почты",
+ "emailServerHint": "Пример: mail.contoso.com",
+ "emailServerInfoBalloon": "Укажите имя узла Exchange Server",
+ "enable": "Включить",
+ "enableSMime": "Включить S/MIME",
+ "enabled": "Включено",
+ "encryptAllEmails": "Шифровать все электронные письма",
+ "encryptionCertificates": "Сертификаты шифрования",
+ "endUserNotifications": "Уведомления для конечных пользователей",
+ "enrollmentTypeLabel": "Тип регистрации устройства",
+ "externalRecipients": "MailTip внешних получателей",
+ "externalRecipientsInfoBalloon": "Подсказка о внешних получателях отображается, если отправитель письма добавляет внешнего получателя либо группу рассылки, содержащую таких получателей. Она информирует отправителей о том, получит ли письмо кто-то за пределами организации, и помогает выбрать подходящие формулировки, тон и содержимое. Доступно только для учетных записей Exchange Online и локальных учетных записей с современной гибридной проверкой подлинности. Если не настроить эту функцию, по умолчанию она будет включена для приложения.",
+ "focusedInbox": "Сортировка почты",
+ "focusedInboxInfoBalloon": "Сортировка почты позволяет разделить папку \"Входящие\" на две вкладки: \"Отсортированные\" (где будут самые важные письма) и \"Прочее\" (куда попадает, чтобы не мешаться, все остальное). Если не настроить эту функцию, по умолчанию она будет для приложения включена. ",
+ "fullScreenEnabledLabel": "Полноэкранный режим",
+ "gmailNineAmountOfEmail": "Объем синхронизируемой электронной почты",
+ "gmailNineAuthenticationMethodInfoBalloon": "Выберите способ проверки подлинности пользователей на сервере электронной почты. Наиболее безопасным и удобным способом для пользователей являются сертификаты. Проверка подлинности на основе сертификатов еще не доступна, так как недоступны профили сертификатов SCEP и PKCS для устройств владельца устройства. ",
+ "gmailNineCertificateUPNInfoBalloon": "Сертификат должен содержать имя субъекта-пользователя (UPN) в качестве альтернативного имени субъекта.",
+ "gmailNineEmailAddressInfoBalloon": "Атрибут, получаемый Intune из Microsoft Entra ID для динамического создания адреса электронной почты, который будет использоваться профилем, например MyName@contoso.com (имя субъекта-пользователя). Дополнительные сведения об атрибутах Microsoft Entra для профилей электронной почты.",
+ "gmailNineEmailServerInfoBalloon": "Расположение Exchange (URL-адрес) сервера электронной почты, к которому указанное приложение подключается для получения электронной почты.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Контроль объема электронной почты, синхронизируемого клиентом.",
+ "gmailNineSSLInfoBalloon": "Включите SSL, чтобы защитить связь с сервером электронной почты.",
+ "gmailNineUsernameInfoBalloon": "Атрибут, получаемый Intune из Microsoft Entra ID для динамического создания имени пользователя, которое будет использоваться профилем, например MyName@contoso.com (имя субъекта-пользователя) или MyName (имя пользователя). Дополнительные сведения об атрибутах Microsoft Entra для профилей электронной почты.",
+ "ignoreManifestScope": "Игнорировать область манифеста",
+ "ignoreVersionDetection": "Игнорировать версию приложения",
+ "informationUrlLabel": "URL-адрес сведений",
+ "informationUrlSizeHint": "Максимальная длина URL-адреса информации — 1024 символа",
+ "installAsManaged": "Установить как управляемое",
+ "installationSourceLabel": "Тип приложения",
+ "installerTypeInfoBalloon": "Тип установщика пакета приложения.",
+ "installerTypeLabel": "Тип установщика",
+ "isFeatured": "Отображение этого приложения как рекомендуемого в Корпоративном портале",
+ "isMAMEnabledToggleLabel": "Да",
+ "lastModifiedDateTime": "Время последнего обновления",
+ "ldapUrl": "URL-адрес LDAP",
+ "licensingType": "Поддерживает назначение контекста устройства",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Минимальная версия операционной системы",
+ "modernAuth": "Современная проверка подлинности",
+ "nameHint": "Введите имя",
+ "nameLabel": "Имя",
+ "nameSizeHint": "Максимальная длина имени — 512 символов.",
+ "notConfigured": "Не настроено",
+ "notesLabel": "Заметки",
+ "notesSizeHint": "Максимальная длина текста заметок — 1024 символа.",
+ "notificationType": "Тип уведомления",
+ "oneDay": "Один день",
+ "oneMonth": "Один месяц",
+ "oneWeek": "Одна неделя",
+ "outlookSMimeSettings": "Параметры S/MIME Outlook",
+ "ownerLabel": "имя владельца;",
+ "ownerSizeHint": "Максимальная длина имени владельца — 256 символов.",
+ "packageIdLabel": "Идентификатор пакета",
+ "packageNameLabel": "Имя пакета",
+ "pivCredentialNotConfigured": "Вы не выбрали издателя производных учетных данных для своего клиента. Это необходимо сделать для успешного применения политики к устройствам.",
+ "platformLabel": "Платформа",
+ "policyDescriptionLabel": "Описание",
+ "policyNameLabel": "Имя",
+ "preComposedIconEnabled": "Предварительная компиляция",
+ "primarySMTPAddress": "Первичный SMTP-адрес",
+ "privacyUrlLabel": "URL-адрес политики конфиденциальности",
+ "publisherHint": "Введите имя издателя",
+ "publisherLabel": "Издатель",
+ "publisherSizeHint": "Длина имени издателя должна составлять от 2 до 1024 символов (включительно)",
+ "require": "Требовать",
+ "requireBiometrics": "Требовать биометрию для доступа к приложению",
+ "sAMAccountName": "SamAccountName",
+ "scopeTagsRequired": "Требуется как минимум один тег области.",
+ "searchAppLabel": "Выбрать приложение",
+ "searchAppLinkText": "Поиск в App Store",
+ "searchWinGetPublicRepositoryLinkText": "Поиск в репозитории сообщества диспетчера пакетов Windows",
+ "searchWinGetStoreRepositoryLinkText": "Поиск в приложении Microsoft Store (новое)",
+ "selectAAD": "Выберите атрибут Microsoft Entra",
+ "selectAppFileLabel": "Выбрать файл",
+ "selectAppFileLinkText": "Выберите файл пакета приложения",
+ "selectAppFileToUpdateLabel": "Выберите файл для обновления",
+ "selectAuthMethod": "Выбрать способ проверки подлинности",
+ "selectAuthType": "Выберите тип проверки подлинности",
+ "selectCatalogAppLabel": "Выбрать приложение",
+ "selectCatalogAppLinkText": "Поиск в каталоге корпоративных приложений",
+ "selectCertificate": "Выберите сертификат",
+ "signAllEmails": "Подписать все электронные письма",
+ "signingCertificates": "Сертификаты подписи",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Описание набора",
+ "suiteNameLabel": "Имя набора",
+ "targetApplicationBundleIdentifier": "Идентификатор набора конечных приложений",
+ "targetedPlatformsLabel": "Целевая платформа",
+ "tasks": "Задачи",
+ "threeDays": "Три дня",
+ "totalLicenseCount": "Всего лицензий",
+ "twoWeeks": "Две недели",
+ "unifiedAssignmentsLabel": "Кому назначить:",
+ "unlimited": "Без ограничений",
+ "urlHint": "Укажите допустимый URL-адрес.",
+ "useManagedBrowserHint": "Только для Android и iOS. Подробнее...",
+ "useManagedBrowserLabel": "Требовать Managed Browser, чтобы открыть эту ссылку",
+ "userPrinicipalName": "Имя субъекта-пользователя",
+ "username": "Имя пользователя",
+ "usernameAttribute": "Атрибут имени пользователя из Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Укажите имя субъекта-пользователя для профиля электронной почты, который будет использоваться для проверки подлинности учетной записи",
+ "usernamePassword": "Имя пользователя и пароль",
+ "webAppUrlHint": "Введите допустимый URL-адрес, начинающийся с http:// или https://",
+ "webAppUrlLabel": "URL-адрес приложения",
+ "webAppUrlSizeHint": "Максимальная длина URL-адреса приложения составляет 1024 символа",
+ "windowsUrlValidation": "Введите допустимый URL-адрес, аналогичный следующему: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm.",
+ "xMLDataEntered": "Введенные данные XML",
+ "xmlFormatInvalid": "Формат политики XML недопустим.",
+ "xmlTooLarge": "Размер входных данных должен быть менее 1 МБ."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Затронутым пользователям будет доступна только страница Центра совместного управления со следующим по величине приоритетом, если она назначена, или страница Центра совместного управления по умолчанию в противном случае.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Центр совместного управления",
"settingDescription": "Параметры совместного управления определяют, кто владеет рабочими нагрузками."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Системное приложение Android Enterprise",
- "androidForWorkApp": "Приложение управляемого Google Play Маркета",
- "androidLobApp": "Бизнес-приложение для Android",
- "androidStoreApp": "Приложение для Магазина Android",
- "builtInAndroid": "Встроенное приложение для Android",
- "builtInApp": "Встроенное приложение",
- "builtInIos": "Встроенное приложение для iOS",
- "default": "",
- "iosIPadOSWebClip": "Веб-клип для iOS и iPadOS",
- "iosLobApp": "Бизнес-приложение для iOS",
- "iosStoreApp": "Приложение iOS Store",
- "iosVppApp": "Приложение iOS Volume Purchase Program",
- "lineOfBusinessApp": "Бизнес-приложение",
- "macOSDmgApp": "Приложение macOS (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Бизнес-приложение macOS",
- "macOSMicrosoftDefenderApp": "ATP в Microsoft Defender (macOS)",
- "macOSOfficeSuiteApp": "Приложения Microsoft 365 (macOS)",
- "macOSPkgApp": "Приложение macOS (PKG)",
- "macOSWebClip": "Веб-клип macOS",
- "macOsVppApp": "Приложение macOS Volume Purchase Program",
- "managedAndroidLobApp": "Управляемое бизнес-приложение для Android",
- "managedAndroidStoreApp": "Управляемое приложение Магазина Android",
- "managedGooglePlayApp": "Приложение управляемого Google Play Маркета",
- "managedGooglePlayPrivateApp": "Частное приложение управляемого Google Play",
- "managedGooglePlayWebApp": "Веб-ссылка управляемого Google Play",
- "managedIosLobApp": "Управляемое бизнес-приложение для iOS",
- "managedIosStoreApp": "Управляемое приложение Магазина iOS",
- "microsoftStoreForBusinessApp": "Приложение Магазина Майкрософт для бизнеса",
- "microsoftStoreForBusinessReleaseManagedApp": "Магазин Майкрософт для бизнеса",
- "officeSuiteApp": "Приложения Microsoft 365 (Windows 10 и более поздних версий)",
- "webApp": "Веб-ссылка",
- "windowsAppXLobApp": "Бизнес-приложение Windows AppX",
- "windowsClassicApp": "Приложение Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 и более поздних версий)",
- "windowsMobileMsiLobApp": "Бизнес-приложение Windows MSI",
- "windowsPhone81AppXBundleLobApp": "Бизнес-приложение Windows Phone 8.1 AppX",
- "windowsPhone81AppXLobApp": "Бизнес-приложение Windows Phone 8.1 AppX",
- "windowsPhone81StoreApp": "Приложение Магазина Windows Phone 8.1",
- "windowsPhoneXapLobApp": "Бизнес-приложение Windows Phone XAP",
- "windowsStoreApp": "Приложение Microsoft Store (прежних версий)",
- "windowsUniversalAppXLobApp": "Универсальное бизнес-приложение Windows AppX",
- "windowsUniversalLobApp": "Универсальное бизнес-приложение Windows",
- "windowsWebApp": "Веб-ссылка Windows"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Рекомендуемые",
+ "CountryNames": {
+ "countryNameNR": "Науру",
+ "countryNameBH": "Бахрейн",
+ "countryNameZA": "ЮАР",
+ "countryNameJO": "Иордания",
+ "countryNameSD": "Судан",
+ "countryNameNU": "Ниуэ",
+ "countryNameCZ": "Чешская Республика",
+ "countryNameLT": "Литва",
+ "countryNameTK": "Токелау",
+ "countryNameEC": "Эквадор",
+ "countryNameVU": "Вануату",
+ "countryNameUG": "Уганда",
+ "countryNameLI": "Лихтенштейн",
+ "countryNameHK": "Гонконг, CАР",
+ "countryNameGH": "Гана",
+ "countryNameSA": "Саудовская Аравия",
+ "countryNamePG": "Папуа — Новая Гвинея",
+ "countryNameBW": "Ботсвана",
+ "countryNameDG": "Диего-Гарсия",
+ "countryNameIN": "Индия",
+ "countryNameHN": "Гондурас",
+ "countryNameRO": "Румыния",
+ "countryNameKZ": "Казахстан",
+ "countryNameLC": "Сент-Люсия",
+ "countryNameGE": "Грузия",
+ "countryNameTT": "Тринидад и Тобаго",
+ "countryNameMP": "Северные Марианские острова",
+ "countryNameMV": "Мальдивы",
+ "countryNameFI": "Финляндия",
+ "countryNameNO": "Норвегия",
+ "countryNameEE": "Эстония",
+ "countryNameVE": "Венесуэла",
+ "countryNameUZ": "Узбекистан",
+ "countryNameME": "Черногория",
+ "countryNameTJ": "Таджикистан",
+ "countryNameAW": "Аруба",
+ "countryNameFR": "Франция",
+ "countryNameOM": "Оман",
+ "countryNameAO": "Ангола",
+ "countryNameIT": "Италия",
+ "countryNameAZ": "Азербайджан",
+ "countryNameKG": "Киргизия",
+ "countryNameWF": "Уоллис и Футуна",
+ "countryNameTL": "Тимор-Лесте",
+ "countryNameFK": "Фолклендские острова (Мальвинские)",
+ "countryNameGY": "Гайана",
+ "countryNameSS": "Южный Судан",
+ "countryNameMM": "Мьянма",
+ "countryNameHT": "Гаити",
+ "countryNameSY": "Сирия",
+ "countryNameMD": "Молдова",
+ "countryNameVC": "Сент-Винсент и Гренадины",
+ "countryNameID": "Индонезия",
+ "countryNameRE": "Реюньон",
+ "countryNameER": "Эритрея",
+ "countryNameMK": "Северная Македония",
+ "countryNameTG": "Того",
+ "countryNamePF": "Французская Полинезия",
+ "countryNameKY": "Острова Кайман",
+ "countryNameIO": "Британская территория в Индийском океане",
+ "countryNameRU": "Россия",
+ "countryNameMA": "Марокко",
+ "countryNameAU": "Австралия",
+ "countryNameBO": "Боливия",
+ "countryNameVA": "Ватикан",
+ "countryNameVG": "Виргинские острова (Великобритания)",
+ "countryNameFM": "Микронезия, Федеративные Штаты",
+ "countryNameAQ": "Антарктида",
+ "countryNameZM": "Замбия",
+ "countryNameBR": "Бразилия",
+ "countryNameIS": "Исландия",
+ "countryNamePE": "Перу",
+ "countryNameBG": "Болгария",
+ "countryNamePR": "Пуэрто-Рико",
+ "countryNameGI": "Гибралтар",
+ "countryNameBS": "Багамы",
+ "countryNameJE": "Джерси",
+ "countryNameMO": "Макао, САР",
+ "countryNameRW": "Руанда",
+ "countryNameAS": "Американское Самоа",
+ "countryNameBQ": "Бонэйр, Синт-Эстатиус и Саба",
+ "countryNameMF": "Сен-Мартен",
+ "countryNameTM": "Туркменистан",
+ "countryNameML": "Мали",
+ "countryNameTO": "Тонга",
+ "countryNameNC": "Новая Каледония",
+ "countryNameAC": "о. Вознесения",
+ "countryNameBN": "Бруней",
+ "countryNameBD": "Бангладеш",
+ "countryNameMW": "Малави",
+ "countryNameGM": "Гамбия",
+ "countryNameGA": "Габон",
+ "countryNameCA": "Канада",
+ "countryNameSH": "Святая Елена",
+ "countryNameYT": "Майотта",
+ "countryNameMN": "Монголия",
+ "countryNamePA": "Панама",
+ "countryNameCM": "Камерун",
+ "countryNameNE": "Нигер",
+ "countryNameCW": "Кюрасао",
+ "countryNameJP": "Япония",
+ "countryNameCY": "Кипр",
+ "countryNameCD": "Демократическая Республика Конго",
+ "countryNameTN": "Тунис",
+ "countryNameTR": "Турция",
+ "countryNameWS": "Самоа",
+ "countryNameSE": "Швеция",
+ "countryNameXK": "Косово",
+ "countryNameKH": "Камбоджа",
+ "countryNamePL": "Польша",
+ "countryNameDZ": "Алжир",
+ "countryNameLR": "Либерия",
+ "countryNameSO": "Сомали",
+ "countryNameDM": "Доминика",
+ "countryNameEG": "Египет",
+ "countryNameGF": "Французская Гвиана",
+ "countryNameNZ": "Новая Зеландия",
+ "countryNamePS": "Палестинская автономия",
+ "countryNameIL": "Израиль",
+ "countryNameSL": "Сьерра-Леоне",
+ "countryNameGR": "Греция",
+ "countryNameNG": "Нигерия",
+ "countryNameMR": "Мавритания",
+ "countryNameVI": "Виргинские острова (США)",
+ "countryNameGQ": "Экваториальная Гвинея",
+ "countryNameMX": "Мексика",
+ "countryNameDJ": "Джибути",
+ "countryNameGN": "Гвинея",
+ "countryNameCN": "Китай",
+ "countryNameMZ": "Мозамбик",
+ "countryNameBV": "Остров Буве",
+ "countryNameNF": "Остров Норфолк",
+ "countryNameTZ": "Танзания",
+ "countryNameAI": "Ангилья",
+ "countryNameGS": "Южная Георгия и Южные Сандвичевы о-ва",
+ "countryNameRS": "Сербия",
+ "countryNameCC": "Кокосовые (Килинг) острова",
+ "countryNameNA": "Намибия",
+ "countryNameDE": "Германия",
+ "countryNameCG": "Республика Конго",
+ "countryNameKW": "Кувейт",
+ "countryNameMH": "Маршалловы Острова",
+ "countryNameVN": "Вьетнам",
+ "countryNameBY": "Беларусь",
+ "countryNameMY": "Малайзия",
+ "countryNameST": "Сан-Томе и Принсипи",
+ "countryNameLS": "Лесото",
+ "countryNameBI": "Бурунди",
+ "countryNameTD": "Чад",
+ "countryNameCX": "Остров Рождества",
+ "countryNameIR": "Иран",
+ "countryNameTV": "Тувалу",
+ "countryNameGW": "Гвинея-Бисау",
+ "countryNameUA": "Украина",
+ "countryNameCU": "Куба",
+ "countryNameCO": "Колумбия",
+ "countryNameNI": "Никарагуа",
+ "countryNameHR": "Хорватия",
+ "countryNameSC": "Сейшелы",
+ "countryNameNL": "Нидерланды",
+ "countryNameUM": "Малые Тихоокеанские Отдаленные Острова США",
+ "countryNameIM": "Остров Мэн",
+ "countryNameFJ": "Фиджи",
+ "countryNameSR": "Суринам",
+ "countryNameGT": "Гватемала",
+ "countryNameSM": "Сан-Марино",
+ "countryNameLA": "Лаос",
+ "countryNameGB": "Соединенное Королевство",
+ "countryNameBB": "Барбадос",
+ "countryNameSI": "Словения",
+ "countryNameAM": "Армения",
+ "countryNameAR": "Аргентина",
+ "countryNamePM": "Сен-Пьер и Микелон",
+ "countryNameTF": "Французские Южные Территории",
+ "countryNameDO": "Доминиканская Республика",
+ "countryNameZW": "Зимбабве",
+ "countryNameMQ": "Мартиника",
+ "countryNamePT": "Португалия",
+ "countryNameCF": "Центрально-Африканская Республика",
+ "countryNameBE": "Бельгия",
+ "countryNameKM": "Коморы",
+ "countryNameLY": "Ливия",
+ "countryNameIE": "Ирландия",
+ "countryNameKP": "Северная Корея",
+ "countryNameGG": "Гернси",
+ "countryNameSK": "Словакия",
+ "countryNameTC": "Острова Теркс и Кайкос",
+ "countryNameNP": "Непал",
+ "countryNameBF": "Буркина-Фасо",
+ "countryNameYE": "Йемен",
+ "countryNameBA": "Босния и Герцеговина",
+ "countryNameGP": "Гваделупа",
+ "countryNameMS": "Монтсеррат",
+ "countryNameCL": "Чили",
+ "countryNameIQ": "Ирак",
+ "countryNameSJ": "Шпицберген и остров Ян-Майен",
+ "countryNameAX": "Аландские острова",
+ "countryNameKE": "Кения",
+ "countryNameGU": "Гуам",
+ "countryNameBM": "Бермуды",
+ "countryNameFO": "Фарерские Острова",
+ "countryNameBL": "Сен-Бартельми",
+ "countryNameLB": "Ливан",
+ "countryNameJM": "Ямайка",
+ "countryNameAF": "Афганистан",
+ "countryNameES": "Испания",
+ "countryNameMC": "Монако",
+ "countryNameSG": "Сингапур",
+ "countryNameAL": "Албания",
+ "countryNameSN": "Сенегал",
+ "countryNameSZ": "Эсватини",
+ "countryNameBZ": "Белиз",
+ "countryNameCI": "Кот-д'Ивуар",
+ "countryNameTW": "Тайвань",
+ "countryNameUY": "Уругвай",
+ "countryNameCK": "Острова Кука",
+ "countryNameTH": "Таиланд",
+ "countryNameHM": "Остров Херд и острова Макдональд",
+ "countryNameGD": "Гренада",
+ "countryNameUS": "Соединенные Штаты",
+ "countryNameAT": "Австрия",
+ "countryNameKR": "Республика Корея",
+ "countryNamePK": "Пакистан",
+ "countryNameDK": "Дания",
+ "countryNameSV": "Сальвадор",
+ "countryNamePW": "Палау",
+ "countryNameET": "Эфиопия",
+ "countryNameMG": "Мадагаскар",
+ "countryNameCR": "Коста-Рика",
+ "countryNameLU": "Люксембург",
+ "countryNameQA": "Катар",
+ "countryNameBT": "Бутан",
+ "countryNameSB": "Соломоновы Острова",
+ "countryNameAE": "ОАЭ",
+ "countryNameAD": "Андорра",
+ "countryNameCV": "Кабо-Верде",
+ "countryNameAG": "Антигуа и Барбуда",
+ "countryNameMU": "Маврикий",
+ "countryNameHU": "Венгрия",
+ "countryNameSX": "Синт-Мартен",
+ "countryNameCH": "Швейцария",
+ "countryNamePN": "О-ва Питкэрн",
+ "countryNameGL": "Гренландия",
+ "countryNamePH": "Филиппины",
+ "countryNameMT": "Мальта",
+ "countryNameKN": "Сент-Китс и Невис",
+ "countryNameLK": "Шри-Ланка",
+ "countryNameKI": "Кирибати",
+ "countryNameBJ": "Бенин",
+ "countryNameLV": "Латвия",
+ "countryNamePY": "Парагвай"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Автор",
+ "template": "Имя шаблона"
+ },
+ "Row": {
+ "ariaLabel": "строка {0} из {1} столбца {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Начните с нуля и выберите нужные свойства в библиотеке доступных свойств инвентаризации"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Начните с нуля и выберите нужные параметры в библиотеке доступных параметров",
+ "title": "Каталог параметров"
+ },
+ "Templates": {
+ "subtitle": "Шаблоны содержат группы параметров, упорядоченные по функциональным возможностям. Используйте шаблон, если вы не хотите создавать политики вручную или хотите предоставить устройствам доступ к корпоративным сетям, например настроив Wi-Fi или VPN.",
+ "title": "Шаблоны"
+ },
+ "noData": "Шаблоны политики не найдены."
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Параметры SmartScreen, рекомендованные для приложения Microsoft Edge: Windows 10 в шаблоне конфигурации облака. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Обнаружение и нейтрализация атак на конечные точки"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "Изоляция приложения и браузера",
+ "aSRApplicationControl": "Управление приложениями",
+ "aSRAttackSurfaceReduction": "Правила сокращения направлений атак",
+ "aSRDeviceControl": "Управление устройством",
+ "aSRExploitProtection": "Защита от эксплойтов",
+ "aSRWebProtection": "Защита от веб-угроз (устаревшая версия Microsoft Edge)",
+ "aVExclusions": "Исключения антивирусной программы в Microsoft Defender",
+ "antivirus": "Антивирусная программа в Microsoft Defender",
+ "cloudPC": "Базовые показатели системы безопасности для Windows 365",
+ "default": "Безопасность конечных точек",
+ "defenderTest": "Демонстрация Microsoft Defender для конечной точки",
+ "diskEncryption": "BitLocker",
+ "eDR": "Обнаружение и нейтрализация атак на конечные точки",
+ "edgeSecurityBaseline": "Базовая конфигурация Microsoft Edge",
+ "edgeSecurityBaselinePreview": "Предварительная версия: базовые показатели Microsoft Edge",
+ "editionUpgradeConfiguration": "Обновление выпуска и переключение режима",
+ "firewall": "Брандмауэр Windows",
+ "firewallRules": "Правила брандмауэра Windows",
+ "identityProtection": "Защита учетных записей",
+ "identityProtectionPreview": "Защита учетных записей (предварительная версия)",
+ "mDMSecurityBaseline1810": "Базовая конфигурация безопасности MDM для Windows 10 и более поздних версий на октябрь 2018 г.",
+ "mDMSecurityBaseline1810Preview": "Предварительная версия базового плана безопасности MDM для Windows 10 и более поздних версий на октябрь 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Предварительная версия базовой конфигурации безопасности MDM для Windows 10 за октябрь 2018 (бета-версия)",
+ "mDMSecurityBaseline1906": "Базовая конфигурация безопасности MDM для Windows 10 и более поздних версий на май 2019 г.",
+ "mDMSecurityBaseline2004": "Базовая конфигурация безопасности MDM для Windows 10 и более поздних версий за август 2020 г.",
+ "mDMSecurityBaseline2101": "Базовая конфигурация безопасности MDM для Windows 10 и более поздних версий за декабрь 2020 г.",
+ "macOSAntivirus": "Антивирус",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "Брандмауэр macOS",
+ "microsoftDefenderBaseline": "Базовые показатели Microsoft Defender для конечной точки",
+ "office365Baseline": "Базовая конфигурация Microsoft Office O365",
+ "office365BaselinePreview": "Предварительная версия: базовый показатель Microsoft Office O365",
+ "securityBaselines": "Базовые показатели системы безопасности",
+ "test": "Тестовый шаблон",
+ "testFirewallRulesSecurityTemplateName": "Правила брандмауэра Windows (тест)",
+ "testIdentityProtectionSecurityTemplateName": "Защита учетных записей (тест)",
+ "windowsSecurityExperience": "Интерфейс безопасности Windows"
+ },
+ "Firewall": {
+ "mDE": "Брандмауэр Windows"
+ },
+ "FirewallRules": {
+ "mDE": "Правила брандмауэра Windows"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "Параметры перемещения известных папок OneDrive: Windows 10 в шаблоне конфигурации облака. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Защита учетной записи",
+ "administrativeTemplates": "Административные шаблоны",
+ "androidCompliancePolicy": "Политика соответствия для Android",
+ "aospDeviceOwnerCompliancePolicy": "Политика соответствия для Android (AOSP)",
+ "applicationControl": "Управление приложениями для бизнеса",
+ "attackSurfaceReductionRules": "Правила уменьшения уязвимой зоны",
+ "bitlocker": "BitLocker",
+ "custom": "Пользовательская",
+ "deliveryOptimization": "Оптимизация доставки",
+ "derivedPersonalIdentityVerificationCredential": "Производные учетные данные",
+ "deviceControl": "Управление устройствами",
+ "deviceFeatures": "Функции устройства",
+ "deviceFirmwareConfigurationInterface": "Интерфейс настройки встроенного ПО устройства",
+ "deviceLock": "Блокировка устройства",
+ "deviceOwner": "Полностью управляемый, выделенный и корпоративный рабочий профиль",
+ "deviceRestrictions": "Ограничения устройств",
+ "deviceRestrictionsWindows10Team": "Ограничения для устройств (Windows 10 для совместной работы)",
+ "domainJoinPreview": "Присоединение к домену",
+ "editionUpgradeAndModeSwitch": "Обновление выпуска и переключение режима",
+ "education": "Образование",
+ "email": "Электронная почта",
+ "emailSamsungKnoxOnly": "Электронная почта (только Samsung KNOX)",
+ "endpointProtection": "Защита конечных точек",
+ "expeditedCheckin": "Конфигурация управления мобильным устройством",
+ "exploitProtection": "Защита от эксплойтов",
+ "extensions": "Расширения",
+ "hardwareConfigurations": "Конфигурации BIOS и другие параметры",
+ "identityProtection": "Защита идентификации",
+ "iosCompliancePolicy": "Политика соответствия для iOS",
+ "kiosk": "Киоск",
+ "localUsersAndGroups": "Изменение членства пользователей в группе",
+ "macCompliancePolicy": "Политика соответствия для Mac",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Базовая конфигурация безопасности Приложений Microsoft 365 для предприятий",
+ "microsoftDefenderAntivirus": "Антивирусная программа в Microsoft Defender",
+ "microsoftDefenderAntivirusexclusions": "Исключения антивирусной программы в Microsoft Defender",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender для конечной точки (настольные компьютеры под управлением Windows 10 или более поздних версий)",
+ "microsoftDefenderFirewallRules": "Правила брандмауэра Windows",
+ "microsoftDefenderforEndpointSecurityBaseline": "Базовая конфигурация безопасности Microsoft Defender для конечной точки",
+ "microsoftEdgeBaseline": "Базовая конфигурация безопасности для Microsoft Edge",
+ "mxProfileZebraOnly": "Профиль MX (только Zebra)",
+ "networkBoundary": "Граница сети",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Переопределение групповой политики",
+ "pkcsCertificate": "Сертификат PKCS",
+ "pkcsImportedCertificate": "Импортированный сертификат PKCS",
+ "preferenceFile": "Файл настроек",
+ "presets": "Предустановки",
+ "scepCertificate": "Сертификат SCEP",
+ "secureAssessmentEducation": "Безопасная оценка (образование)",
+ "securityBaselineForHololens2Advanced": "Расширенная базовая конфигурация безопасности для HoloLens 2",
+ "securityBaselineForHololens2Standard": "Стандартная базовая конфигурация безопасности для HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Базовая конфигурация безопасности для Microsoft Edge",
+ "settingsCatalog": "Каталог параметров",
+ "sharedMultiUserDevice": "Устройство коллективного пользования с общим доступом",
+ "softwareUpdates": "Обновления программного обеспечения",
+ "trustedCertificate": "Доверенный сертификат",
+ "unknown": "Неизвестно",
+ "unsupported": "Не поддерживается",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Импорт Wi-Fi",
+ "windows10CompliancePolicy": "Политика соответствия для Windows 10/11",
+ "windows10MobileCompliancePolicy": "Политика соответствия для Windows 10 Mobile",
+ "windows10XScep": "Сертификат SCEP — тест",
+ "windows10XTrustedCertificate": "Доверенный сертификат — тест",
+ "windows10XVPN": "VPN — тест",
+ "windows10XWifi": "WIFI — тест",
+ "windows11SecurityBaseline": "Базовая конфигурация безопасности для Windows 10 и более поздних версий",
+ "windows365SecurityBaseline": "Базовые показатели системы безопасности для Windows 365",
+ "windows8CompliancePolicy": "Политика соответствия для Windows 8",
+ "windowsHealthMonitoring": "Мониторинг работоспособности Windows",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Политика соответствия для Windows Phone",
+ "windowsUpdateforBusiness": "Центр обновления Windows для бизнеса",
+ "wiredNetwork": "Проводная сеть",
+ "workProfile": "Личный рабочий профиль"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Сделать обновление доступным постепенно",
+ "immediateStart": "Сделать обновление доступным как можно скорее",
+ "startDateOnly": "Сделать обновление доступным в указанную дату"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Запрещать автоматически",
+ "autoGrant": "Автоматически предоставлять",
+ "prompt": "Запрос"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Доступ к местоположению (примерному)",
+ "accessFineLocation": "Доступ к местоположению (точному)",
+ "addVoicemail": "Добавление голосовой почты",
+ "bodySensors": "Разрешение данных датчиков тела",
+ "bodySensorsBackground": "Разрешить фоновые данные датчика тела",
+ "callPhone": "Совершение звонков по телефону",
+ "camera": "Камера",
+ "getAccounts": "Получение учетных записей",
+ "nearbyDevices": "Устройства поблизости",
+ "nearbyWifiDevices": "Устройства Wi-Fi поблизости",
+ "postNotifications": "Публикация уведомлений",
+ "processOutgoingCalls": "Обработка исходящих звонков",
+ "readCalendar": "Календарь (чтение)",
+ "readCallLog": "Журнал звонков (чтение)",
+ "readContacts": "Контакты (чтение)",
+ "readExternalStorage": "Внешнее хранилище (чтение)",
+ "readMediaAudio": "Media Audio (чтение)",
+ "readMediaImages": "Media Images (чтение)",
+ "readMediaVideo": "Media Video (чтение)",
+ "readPhoneState": "Состояние телефона (чтение)",
+ "readSMS": "SMS (чтение)",
+ "receiveMMS": "MMS (получение)",
+ "receiveSMS": "SMS (получение)",
+ "receiveWAPPush": "Сообщения WAP-push (получение)",
+ "recordAudio": "Запись звука",
+ "sendSMS": "SMS (отправка)",
+ "useSIP": "Использование службы SIP",
+ "writeCalendar": "Календарь (запись)",
+ "writeCallLog": "Журнал звонков (запись)",
+ "writeContacts": "Контакты (запись)",
+ "writeExternalStorage": "Внешнее хранилище (запись)"
+ },
+ "RemoveDialog": {
+ "description": "Удалить это разрешение?",
+ "title": "Удалить"
+ },
+ "TableHeader": {
+ "permission": "Разрешение",
+ "permissionGroup": "Группа разрешений",
+ "permissionName": "Имя разрешения",
+ "permissionState": "Состояние разрешения"
+ },
+ "addButtonLabel": "Добавить",
+ "addPermissionTableDescription": "Укажите разрешения, которые требуется переопределить. Если не выбрать или не указать их в явном виде, будет действовать поведение по умолчанию.",
+ "addPermissionsTitle": "Добавить разрешения",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Дополнительные сведения о разрешениях среды выполнения Android",
+ "permissionTableDescription": "Предоставляемые здесь разрешения переопределят политику \"Разрешения приложения по умолчанию\" для выбранных приложений.",
+ "permissionsTitle": "Разрешения"
+ },
+ "AssignmentAction": {
+ "exclude": "Исключенные",
+ "include": "Включено",
+ "includeAllDevicesVirtualGroup": "Включено",
+ "includeAllUsersVirtualGroup": "Включено"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Поиск (Майкрософт) по умолчанию",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype для бизнеса",
+ "oneDrive": "Классическое приложение OneDrive",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "Файл или папка в качестве выбранного требования.",
+ "pathToolTip": "Полный путь к файлу или папке для обнаружения.",
+ "property": "Свойство",
+ "valueToolTip": "Выберите значение требования, соответствующее выбранному методу обнаружения. Дату и время требования необходимо указать в локальном формате."
+ },
+ "GridColumns": {
+ "pathOrScript": "Путь или сценарий",
+ "type": "Тип"
+ },
+ "Registry": {
+ "keyPath": "Путь к разделу",
+ "keyPathTooltip": "Полный путь к записи реестра, содержащей значение требования.",
+ "operator": "Operator",
+ "operatorTooltip": "Выберите оператор для сравнения.",
+ "registryRequirement": "Требование для ключа реестра",
+ "registryRequirementTooltip": "Выберите сравнение для требования ключа реестра.",
+ "valueName": "Имя параметра",
+ "valueNameTooltip": "Имя требуемого значения реестра."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Файл",
+ "registry": "Реестр",
+ "script": "Скрипт"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Логический",
+ "dateTime": "Дата и время",
+ "float": "С плавающей запятой",
+ "integer": "Целое число",
+ "string": "Строка",
+ "version": "Версия"
+ },
+ "duplicateName": "Имя сценария {0} уже используется. Введите другое имя.",
+ "enforceSignatureCheck": "Принудительно проверить подпись сценария",
+ "enforceSignatureCheckTooltip": "Выберите \"Да\", чтобы проверить, что сценарий подписан доверенным издателем, что позволит выполнять сценарий без отображения предупреждений или запросов. Сценарий будет выполнен без блокировки. Выберите \"Нет\" (по умолчанию), чтобы сценарий выполнялся с выдачей запроса на подтверждение пользователю, но без проверки подписи.",
+ "loggedOnCredentials": "Запускать сценарий по учетным данным",
+ "loggedOnCredentialsTooltip": "Запустите сценарий с использованием учетных данных устройства, использованных при входе.",
+ "operatorTooltip": "Выберите оператор для сравнения требований.",
+ "requirementMethod": "Выберите тип выходных данных.",
+ "requirementMethodTooltip": "Выберите тип данных, используемый при определении соответствия требованию.",
+ "scriptContent": "Содержимое сценария",
+ "scriptFile": "Файл скрипта",
+ "scriptFileTooltip": "Выберите сценарий PowerShell, который будет определять наличие приложения на клиенте. Если приложение обнаружено, процесс обнаружения возвратит нулевой код выхода и запишет строковое значение в стандартный поток вывода.",
+ "scriptName": "Имя скрипта",
+ "value": "Значение",
+ "valueTooltip": "Выберите значение требования, соответствующее выбранному методу обнаружения. Дату и время требования необходимо указать в локальном формате."
+ },
+ "bladeTitle": "Добавление правила требований",
+ "createRequirementHeader": "Создание требования",
+ "header": "Настройка дополнительных правил требований",
+ "label": "Правила дополнительных требований",
+ "noRequirementsSelectedPlaceholder": "Требования не указаны.",
+ "requirementType": "Тип требования",
+ "requirementTypeTooltip": "Выберите тип метода обнаружения, используемого для определения того, как будет проверяться требование."
+ },
+ "architectures": "Архитектура операционной системы",
+ "architecturesTooltip": "Выберите архитектуры, необходимые для установки приложения.",
+ "bladeTitle": "Требования",
+ "diskSpace": "Требуется места на диске (МБ)",
+ "diskSpaceTooltip": "Свободное дисковое пространство на системном диске, необходимое для установки приложения.",
+ "header": "Укажите требования, которым должны соответствовать устройства до установки приложения:",
+ "maximumTextFieldValue": "Максимальное значение — {0}.",
+ "minimumCpuSpeed": "Минимальная требуемая частота ЦП (МГц)",
+ "minimumCpuSpeedTooltip": "Минимальная частота ЦП, необходимая для установки приложения.",
+ "minimumLogicalProcessors": "Минимальное требуемое число логических процессоров",
+ "minimumLogicalProcessorsTooltip": "Минимальное число логических процессоров, необходимое для установки приложения.",
+ "minimumOperatingSystem": "Минимальная версия операционной системы",
+ "minimumOperatingSystemTooltip": "Выберите минимальную версию операционной системы, необходимую для установки приложения.",
+ "minumumTextFieldValue": "Значение должно быть не менее {0}.",
+ "physicalMemory": "Необходимый объем физической памяти (МБ)",
+ "physicalMemoryTooltip": "Физическая память (ОЗУ), необходимая для установки приложения.",
+ "selectorLabel": "Требования",
+ "validNumber": "Введите допустимое число."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Фильтр",
+ "assignmentFilterTypeColumnHeader": "Режим фильтра",
+ "assignmentToast": "Уведомления для конечных пользователей",
+ "assignmentTypeTableHeader": "Тип назначения",
+ "autoUpdate": "Автоматическое обновление",
+ "deadlineTimeColumnLabel": "Крайний срок установки",
+ "deliveryOptimizationPriorityHeader": "Приоритет оптимизации доставки",
+ "groupTableHeader": "Группа",
+ "installContextLabel": "Контекст установки",
+ "isRemovable": "Установить как удаляемое",
+ "licenseTypeLabel": "Тип лицензии",
+ "modeTableHeader": "Групповой режим",
+ "policySet": "Набор политик",
+ "preventAutoAppUpdate": "Блокировать автоматическое обновление приложения",
+ "preventManagedAppBackup": "Запретить резервное копирование приложений iCloud",
+ "restartGracePeriodHeader": "Льготный период перезапуска",
+ "startTimeColumnLabel": "Доступность",
+ "tracks": "Пути",
+ "uninstallOnRemoval": "Удаление при удалении устройства",
+ "updateMode": "Приоритет обновления",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "Веб-приложение AAD",
+ "androidEnterpriseSystemApp": "Системное приложение Android Enterprise",
+ "androidForWorkApp": "Приложение управляемого Google Play Маркета",
+ "androidLobApp": "Бизнес-приложение для Android",
+ "androidStoreApp": "Приложение для Магазина Android",
+ "builtInAndroid": "Встроенное приложение для Android",
+ "builtInApp": "Встроенное приложение",
+ "builtInIos": "Встроенное приложение для iOS",
+ "iosIPadOSWebClip": "Веб-клип iOS/iPadOS",
+ "iosLobApp": "Бизнес-приложение для iOS",
+ "iosStoreApp": "Приложение iOS Store",
+ "iosVppApp": "Приложение iOS Volume Purchase Program",
+ "lineOfBusinessApp": "Бизнес-приложение",
+ "macOSDmgApp": "Приложение macOS (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Бизнес-приложение macOS",
+ "macOSMicrosoftDefenderApp": "ATP в Microsoft Defender (macOS)",
+ "macOSOfficeSuiteApp": "Пакет Office для macOS",
+ "macOSPkgApp": "Приложение macOS (PKG)",
+ "macOSWebClip": "Веб-клип macOS",
+ "macOsVppApp": "Приложение macOS Volume Purchase Program",
+ "managedAndroidLobApp": "Управляемое бизнес-приложение для Android",
+ "managedAndroidStoreApp": "Управляемое приложение Магазина Android",
+ "managedGooglePlayApp": "Приложение управляемого Google Play Маркета",
+ "managedGooglePlayPrivateApp": "Частное приложение управляемого Google Play",
+ "managedGooglePlayWebApp": "Веб-ссылка управляемого Google Play",
+ "managedIosLobApp": "Управляемое бизнес-приложение для iOS",
+ "managedIosStoreApp": "Управляемое приложение Магазина iOS",
+ "microsoftStoreForBusinessApp": "Приложение Магазина Майкрософт для бизнеса",
+ "microsoftStoreForBusinessReleaseManagedApp": "Магазин Майкрософт для бизнеса",
+ "officeAddIn": "Надстройка Office",
+ "officeSuiteApp": "Приложения Microsoft 365 (Windows 10 и более поздних версий)",
+ "sharePointApp": "Приложение SharePoint",
+ "teamsApp": "Приложение Teams",
+ "webApp": "Веб-ссылка",
+ "win32CatalogApp": "Приложение каталога Windows (Win32)",
+ "winGetPublicApp": "Репозиторий сообщества диспетчера пакетов Windows",
+ "winGetStoreApp": "Приложение Microsoft Store (новое)",
+ "windowsAppXLobApp": "Бизнес-приложение Windows AppX",
+ "windowsClassicApp": "Приложение Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 и более поздних версий)",
+ "windowsMobileMsiLobApp": "Бизнес-приложение Windows MSI",
+ "windowsPhone81AppXBundleLobApp": "Бизнес-приложение Windows Phone 8.1 AppX",
+ "windowsPhone81AppXLobApp": "Бизнес-приложение Windows Phone 8.1 AppX",
+ "windowsPhone81StoreApp": "Приложение Магазина Windows Phone 8.1",
+ "windowsPhoneXapLobApp": "Бизнес-приложение Windows Phone XAP",
+ "windowsStoreApp": "Приложение Microsoft Store (прежних версий)",
+ "windowsUniversalAppXLobApp": "Универсальное бизнес-приложение Windows AppX",
+ "windowsUniversalLobApp": "Универсальное бизнес-приложение Windows",
+ "windowsWebApp": "Веб-ссылка Windows"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Исключено",
+ "include": "Включено",
+ "includeAllDevicesVirtualGroup": "Включено",
+ "includeAllUsersVirtualGroup": "Включено"
+ },
+ "AssignmentToast": {
+ "hideAll": "Скрывать все всплывающие уведомления",
+ "showAll": "Показывать все всплывающие уведомления",
+ "showReboot": "Показывать всплывающие уведомления о перезапуске компьютера"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Да",
+ "notConfigured": "Нет"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Фон",
+ "displayText": "Скачивание содержимого в {0}",
+ "foreground": "Передний план",
+ "header": "Приоритет оптимизации доставки"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Установка приложения может привести к перезапуску устройства",
+ "basedOnReturnCode": "Определять режим по кодам возврата",
+ "force": "Intune выполнит принудительную перезагрузку устройства",
+ "suppress": "Без определенных действий"
+ },
+ "FilterType": {
+ "exclude": "Исключить",
+ "include": "Включить",
+ "none": "Нет"
+ },
+ "InstallIntent": {
+ "available": "Доступно для зарегистрированных устройств",
+ "availableWithoutEnrollment": "Доступно с регистрацией или без регистрации",
+ "notApplicable": "неприменимо",
+ "required": "Обязательно",
+ "uninstall": "Удалить"
+ },
+ "SettingType": {
+ "assignmentType": "Тип назначения",
+ "deviceLicensing": "Тип лицензии",
+ "installContext": "Удаление при удалении устройства",
+ "toastSettings": "Уведомления для конечных пользователей",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "По умолчанию",
+ "postponed": "Отложено",
+ "priority": "Высокий приоритет"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Сбой",
+ "hardReboot": "Холодная перезагрузка",
+ "retry": "Повторить",
+ "softReboot": "Горячая перезагрузка",
+ "success": "Успешно выполнено"
+ },
+ "Columns": {
+ "codeType": "Тип кода",
+ "returnCode": "Код возврата"
+ },
+ "bladeTitle": "Коды возврата",
+ "gridAriaLabel": "Коды возврата",
+ "header": "Задайте коды возврата, чтобы указать действия после установки:",
+ "onAddAnnounceMessage": "Код возврата: добавлен элемент {0} из {1}.",
+ "onDeleteSuccess": "Код возврата {0} удален.",
+ "returnCodeAlreadyUsedValidation": "Код возврата уже используется.",
+ "returnCodeMustBeIntegerValidation": "Код возврата должен быть целым числом.",
+ "returnCodeShouldBeAtLeast": "Код возврата не может быть меньше {0}.",
+ "returnCodeShouldBeAtMost": "Код возврата не может превышать {0}.",
+ "selectorLabel": "Коды возврата"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone и iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Добавить границу сети",
+ "addNetworkBoundaryButton": "Добавить границу сети...",
+ "allowWindowsSearch": "Разрешить службе Windows Search искать зашифрованные данные предприятия и приложения Магазина",
+ "authoritativeIpRanges": "Список диапазонов корпоративных IP-адресов является надежным (не вести автоматическое обнаружение)",
+ "authoritativeProxyServers": "Список корпоративных прокси-серверов является надежным (не вести автоматическое обнаружение)",
+ "boundaryType": "Тип границ",
+ "cloudResources": "Облачные ресурсы",
+ "corporateIdentity": "Удостоверение организации",
+ "dataRecoveryCert": "Отправить сертификат агента восстановления данных (DRA), чтобы обеспечить расшифровку зашифрованных данных",
+ "editNetworkBoundary": "Изменить границу сети",
+ "enrollmentState": "Состояние регистрации",
+ "iPv4Ranges": "Диапазоны IPv4-адресов",
+ "iPv6Ranges": "Диапазоны IPv6-адресов",
+ "internalProxyServers": "Внутренние прокси-серверы",
+ "maxInactivityTime": "Максимальное количество времени (в минутах) при простое до блокировки устройства с помощью ПИН-кода или пароля",
+ "maxPasswordAttempts": "Число неудачных попыток проверки подлинности до очистки устройства",
+ "mdmDiscoveryUrl": "URL-адрес обнаружения MDM",
+ "mdmRequiredSettingsInfo": "Эта политика применяется только к юбилейному обновлению Windows 10 и более поздним версиям. Она использует Windows Information Protection (WIP), чтобы применить защиту.",
+ "minimumPinLength": "Задать минимальное число символов для ПИН-кода",
+ "name": "Имя",
+ "networkBoundariesGridEmptyText": "Здесь будут показаны все границы сети, которые вы добавите.",
+ "networkBoundary": "Граница сети",
+ "networkDomainNames": "Сетевые домены",
+ "neutralResources": "Нейтральные ресурсы",
+ "passportForWork": "Использовать Windows Hello для бизнеса для входа в Windows",
+ "pinExpiration": "Укажите интервал времени (в днях), в течение которого можно использовать ПИН-код до того, как система потребует его изменить.",
+ "pinHistory": "Укажите число запрещенных к использованию предыдущих значений ПИН-кода, связываемых с учетной записью пользователя",
+ "pinLowercaseLetters": "Настроить использование строчных букв в ПИН-коде Windows Hello для бизнеса.",
+ "pinSpecialCharacters": "Настроить использование специальных символов в ПИН-коде Windows Hello для бизнеса.",
+ "pinUppercaseLetters": "Настроить использование прописных букы в ПИН-коде Windows Hello для бизнеса.",
+ "protectUnderLock": "Препятствовать доступу приложений к данным предприятия, если устройство заблокировано. Применимо только к Windows 10 Mobile",
+ "protectedDomainNames": "Защищенные домены",
+ "proxyServers": "Прокси-серверы",
+ "requireAppPin": "Отключить ПИН-код приложения, если ПИН-код устройства управляемый",
+ "requiredSettings": "Обязательные параметры",
+ "requiredSettingsInfo": "Изменение области или удаление этой политики приведет к расшифровке корпоративных данных.",
+ "revokeOnMdmHandoff": "Отозвать доступ к защищенным данным при регистрации устройства в MDM",
+ "revokeOnUnenroll": "Отзывать ключи шифрования при отмене регистрации",
+ "rmsTemplateForEdp": "Укажите идентификатор шаблона, который следует использовать для Azure RMS.",
+ "showWipIcon": "Показать значок защиты корпоративных данных",
+ "type": "Тип",
+ "useRmsForWip": "Использовать Azure RMS для WIP",
+ "value": "Значение",
+ "weRequiredSettingsInfo": "Эта политика применяется только к обновлению Windows 10 Creators Update или более поздним версиям. Она использует Windows Information Protection (WIP) и Windows MAM, чтобы применить защиту.",
+ "wipProtectionMode": "Режим защиты Windows Information Protection",
+ "withEnrollment": "С регистрацией",
+ "withoutEnrollment": "Без регистрации"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Арабский",
+ "bulgarian": "Болгарский",
+ "chineseSimplified": "Китайский (упрощенное письмо)",
+ "chineseTraditional": "Китайский (традиционное письмо)",
+ "croatian": "Хорватский",
+ "czech": "Чешский",
+ "danish": "Датский",
+ "dutch": "Нидерландский",
+ "englishUK": "Английский (Соединенное Королевство)",
+ "englishUS": "Английский (США)",
+ "estonian": "Эстонский",
+ "finnish": "Финский",
+ "frenchCanada": "Французский (Канада)",
+ "frenchFrance": "Французский (Франция)",
+ "german": "Немецкий",
+ "greek": "Греческий",
+ "hebrew": "Иврит",
+ "hungarian": "Венгерский",
+ "italian": "Итальянский",
+ "japanese": "Японский",
+ "korean": "Корейский",
+ "latvian": "Латышский",
+ "lithuanian": "Литовский",
+ "norwegian": "Норвежский (букмол)",
+ "polish": "Польский",
+ "portugueseBrazil": "Португальский (Бразилия)",
+ "portuguesePortugal": "Португальский (Португалия)",
+ "romanian": "Румынский",
+ "russian": "Русский",
+ "serbian": "Сербский",
+ "slovak": "Словацкий",
+ "slovenian": "Словенский",
+ "spanishMexico": "Испанский (Мексика)",
+ "spanishSpain": "Испанский (Испания)",
+ "swedish": "Шведский",
+ "thai": "Таиланд",
+ "turkish": "Турецкий",
+ "ukrainian": "Украинский"
+ },
+ "Summary": {
+ "placeholder": "Выберите уведомление в левой части, чтобы просмотреть его содержимое."
+ },
+ "companyContact": "Показать контактные данные",
+ "companyLogo": "Показать логотип организации",
+ "companyName": "Показать название организации",
+ "createEditDescription": "Создание или изменение шаблонов сообщений с уведомлениями.",
+ "createMessage": "Создать сообщение",
+ "deviceDetails": "Показать сведения об устройстве",
+ "deviceDetailsInfoBox": "По умолчанию этот параметр отключен, так как получение сведений об устройстве может привести к задержке получения уведомлений по электронной почте.",
+ "editImpactInfo": "Изменение этого шаблона сообщений с уведомлениями повлияет на все политики, которые используют этот шаблон.",
+ "editMessage": "Изменить сообщение",
+ "email": "электронная почта",
+ "emailFooterTitle": "Нижний колонтитул сообщения электронной почты",
+ "emailHeaderFooterInfo": "Параметры колонтитулов для уведомлений по электронной почте зависят от параметров персонализации в узле администрирования клиента в Endpoint Manager.",
+ "emailHeaderTitle": "Заголовок сообщения электронной почты",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Настроить параметры персонализации",
+ "formSubTitle": "Создание или изменение электронных писем с уведомлениями.",
+ "headerFooterSettingsTab": "Настройки верхнего и нижнего колонтитула",
+ "imgPreview": "Предварительный просмотр изображения",
+ "infotext": "Выберите уведомление. Чтобы создать уведомление, перейдите в подраздел \"Уведомление\" раздела \"Управление\" рабочей нагрузки \"Задание соответствия устройства требованиям\".",
+ "iwLink": "Показать ссылку на веб-сайт корпоративного портала",
+ "listEmpty": "Шаблонов сообщений нет.",
+ "listEmptySelectOnly": "Шаблонов сообщений нет. Чтобы создать уведомление, откройте раздел \"Уведомления\" в разделе \"Управление\" рабочей нагрузки \"Задание соответствия устройства требованиям\".",
+ "listSubTitle": "Список шаблонов сообщений с уведомлениями",
+ "listTitle": "Шаблоны уведомлений",
+ "localizedNotificationMessageTemplates": "Локализованные шаблоны уведомлений",
+ "messageAssigned": "Невозможно удалить шаблон сообщений, так как он используется одной политикой соответствия или несколькими.",
+ "messageCapitalized": "Шаблон сообщения уведомления",
+ "messageLowercase": "шаблон сообщения уведомления",
+ "missingDefaultError": "Выберите шаблон по умолчанию",
+ "notificationMessageTemplates": "Шаблоны уведомлений",
+ "rowValidationError": "Требуется минимум один шаблон сообщения.",
+ "selectDescription": "Выберите сообщение с уведомлением. Чтобы создать уведомление, перейдите в подраздел \"Уведомления\" раздела \"Управление\" рабочей нагрузки \"Задание соответствия устройства требованиям\".",
+ "tenantValueText": "Стоимость арендатора",
+ "testEmailLabel": "Отправить предварительную версию электронного письма",
+ "localeLabel": "Языковой стандарт",
+ "isDefaultLocale": "По умолчанию"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Настройка устройств для начальной подготовки.",
+ "title": "Подготовка устройства"
+ },
+ "EnrollmentSettings": {
+ "description": "Настройте параметры регистрации, например блокировку регистрации и назначение пользователям.",
+ "title": "Параметры регистрации"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Настройте параметры, которые пользователи смогут использовать для восстановления Windows с загрузочного устройства флэш-памяти.",
+ "menuTitle": "Конфигурация восстановления операционной системы Windows"
+ },
+ "coManagementAuthorityDesc": "Настройка параметров совместного управления для интеграции Configuration Manager",
+ "coManagementAuthorityTitle": "Параметры совместного управления ",
+ "deploymentProfiles": "Профили развертывания Windows AutoPilot",
+ "description": "Дополнительные сведения о семи способах регистрации ПК с Windows 10/11 в Intune пользователями или администраторами.",
+ "descriptionLabel": "Методы регистрации Windows",
+ "enrollmentStatusPage": "Страница состояния регистрации"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Выберите число битов, содержащееся в ключе.",
+ "keyUsage": "Укажите криптографическое действие, необходимое для обмена открытым ключом сертификата.",
+ "renewalThreshold": "Введите процент (от 1 до 99 %) оставшегося времени существования сертификата, по достижении которого устройство может запросить его продление. Рекомендуемое значение в Intune — 20 %. (1–99)",
+ "rootCert": "Выберите ранее настроенный и назначенный профиль корневого сертификата ЦС. Сертификат ЦС должен совпадать с корневым сертификатом ЦС, выдающим сертификат для этого профиля (который вы сейчас настраиваете).",
+ "scepServerUrl": "Введите URL-адрес сервера NDES, выдающего сертификаты по протоколу SCEP (требуется HTTPS), например https://contoso.com/certsrv/mscep/mscep.dll.",
+ "scepServerUrls": "Добавьте URL-адреса для сервера NDES, который выдает сертификаты по протоколу SCEP (требуется HTTPS), например https://contoso.com/certsrv/mscep/mscep.dll.",
+ "subjectAlternativeName": "Альтернативное имя субъекта",
+ "subjectNameFormat": "Формат имени субъекта",
+ "validityPeriod": "Время, оставшееся до истечения срока действия сертификата. Введите значение не больше срока действия, указанного в шаблоне сертификата. Значение по умолчанию — один год."
+ },
+ "appInstallContext": "Этот параметр задает контекст установки, связываемый с приложением. Для приложений в двойном режиме выберите нужный контекст. Для прочих приложений выбор делается заранее на основе пакета и не может быть изменен.",
+ "autoUpdateMode": "Настройте приоритет обновления приложения. Выберите \"По умолчанию\", чтобы перед обновлением приложения устройство было подключено к сети Wi-Fi, заряжалось от источника питания и не находилось в состоянии активного использования. Выберите \"Высокая важность\", чтобы обновить приложение немедленно после его публикации разработчиком вне зависимости от состояния заряда, подключения к сети Wi-Fi или действий конечного пользователя на устройстве. Выберите \"Отложено\", чтобы отказаться от обновлений приложения на срок до 90 дней. Значения \"Высокая важность\" и \"Отложено\" применяются только для устройств DO.",
+ "configurationSettingsFormat": "Текст формата для параметров конфигурации",
+ "ignoreVersionDetection": "Задайте значение \"Да\" для приложений, которые автоматически обновляются разработчиком (например, Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Выберите \"Да\" для приложений, которые будут автоматически обновляться разработчиком или для которых нужно только проверить bundleID (ИД пакета) перед установкой. Выберите \"Нет\" для проверки bundleID и номера версии приложения перед установкой.",
+ "installAsManagedMacOSLobApp": "Этот параметр применяется только к macOS 11 и более поздним версиям. Приложение будет установлено, но не будет управляться в версиях до macOS 10.15 включительно.",
+ "installContextDropdown": "Выберите нужный контекст установки. В контексте пользователя приложение будет установлено только для целевого пользователя, а в контексте устройства — для всех пользователей на устройстве.",
+ "ldapUrl": "Это имя узла LDAP, где клиенты могут получить открытые ключи шифрования для получателей электронной почты. Сообщения электронной почты будут зашифрованы, когда ключ станет доступен. Поддерживаемые форматы:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Выберите разрешения среды выполнения для связанного приложения.",
+ "policyAssociatedApp": "Выберите приложение, с которым будет связана эта политика.",
+ "policyConfigurationSettings": "Выберите способ для определения параметров конфигурации этой политики.",
+ "policyDescription": "Дополнительно можно ввести описание этой политики конфигурации.",
+ "policyEnrollmentType": "Выберите, как осуществляется управление этими параметрами: с помощью управления устройствами или приложений, созданных на основе пакета SDK Intune.",
+ "policyName": "Введите имя политики конфигурации.",
+ "policyPlatform": "Выберите платформу, к которой будет применена эта политика конфигурации приложений.",
+ "policyProfileType": "Выберите типы профилей устройств, к которым будет применяться этот профиль конфигурации приложений.",
+ "policySMime": "Настройка параметров подписи и шифрования S/MIME для Outlook.",
+ "sMimeDeployCertsFromIntune": "Укажите, будут ли доставляться сертификаты S/MIME из Intune для использования с Outlook.\r\nIntune может автоматически развертывать пользователям сертификаты для подписи и шифрования через Корпоративный портал.",
+ "sMimeEnable": "Укажите, включены ли элементы управления S/MIME при написании электронного письма.",
+ "sMimeEnableAllowChange": "Укажите, разрешено ли пользователю изменять параметр \"Включить S/MIME\".",
+ "sMimeEncryptAllEmails": "Укажите, должны ли шифроваться все электронные письма.\r\nШифрование преобразует данные в зашифрованный текст, чтобы их мог прочесть только получатель.",
+ "sMimeEncryptAllEmailsAllowChange": "Укажите, разрешено ли пользователю изменять параметр \"Шифровать все электронные письма\".",
+ "sMimeEncryptionCertProfile": "Укажите профиль сертификата для шифрования электронной почты.",
+ "sMimeSignAllEmails": "Укажите, следует ли подписывать все электронные письма.\r\nЦифровая подпись проверяет подлинность письма и защищает от незаконного изменения содержимого при передаче.",
+ "sMimeSignAllEmailsAllowChange": "Укажите, разрешено ли пользователю изменять параметр \"Подписать все электронные письма\".",
+ "sMimeSigningCertProfile": "Укажите профиль сертификата для подписывания электронной почты.",
+ "sMimeUserNotificationType": "Способ уведомления пользователей о необходимости открыть Корпоративный портал и получить сертификаты S/MIME для Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} включено как минимум в один набор политик. Если вы удалите {0}, вы больше не сможете назначать его через эти наборы. Все равно удалить?",
+ "contentWithError": "{0}, возможно, включено как минимум в один набор политик. Если вы удалите {0}, вы больше не сможете назначать его через эти наборы. Все равно удалить?",
+ "header": "Вы действительно хотите удалить это ограничение?"
+ },
+ "DeviceLimit": {
+ "description": "Укажите максимальное число устройств, которые может зарегистрировать пользователь.",
+ "header": "Ограничения числа устройств",
+ "info": "Определяет, сколько устройств может зарегистрировать каждый пользователь."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Должна использоваться версия 1.0 или более поздняя.",
+ "android": "Введите допустимый номер версии. Например, 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Введите допустимый номер версии. Например, 5.0, 5.1.1",
+ "iOS": "Введите допустимый номер версии. Например, 9.0, 10.0, 9.0.2",
+ "mac": "Введите допустимый номер версии. Примеры: 10, 10.10, 10.10.1",
+ "min": "Минимум не может быть меньше {0}",
+ "minMax": "Минимальная версия не может быть больше максимальной.",
+ "windows": "Требуется 10.0 или более поздняя версия. Оставьте поле пустым, чтобы разрешить устройства с версией 8.1.",
+ "windowsMobile": "Требуется 10.0 или более поздняя версия. Оставьте поле пустым, чтобы разрешить устройства с версией 8.1."
+ },
+ "allPlatformsBlocked": "Все платформы устройств заблокированы. Разрешите регистрацию платформ, чтобы включить их конфигурацию.",
+ "blockManufacturerPlaceHolder": "Имя изготовителя",
+ "blockManufacturersHeader": "Заблокированные производители",
+ "cannotRestrict": "Ограничение не поддерживается",
+ "configurationDescription": "Укажите ограничения конфигурации платформы, которые должны быть соблюдены при регистрации устройства. Для ограничения устройств после регистрации используйте политики соответствия. Формат версии: основная.дополнительная.сборка. Ограничения версии относятся только к устройствам, зарегистрированным на корпоративном портале. Intune по умолчанию классифицирует устройства как находящиеся в личном владении. Для их классификации как корпоративных нужны дополнительные действия.",
+ "configurationDescriptionLabel": "Дополнительные сведения о настройке ограничений регистрации",
+ "configurations": "Настройка платформ",
+ "deviceManufacturer": "Производитель устройства",
+ "header": "Ограничения по типу устройств",
+ "info": "Определяет, какие платформы, версии и типы управления можно регистрировать.",
+ "manufacturer": "Производитель",
+ "max": "Макс.",
+ "maxVersion": "Максимальная версия",
+ "min": "Min",
+ "minVersion": "Минимальная версия",
+ "newPlatforms": "Вы разрешили использование новых платформ. При необходимости обновите конфигурации платформ.",
+ "personal": "Личные",
+ "platform": "Платформа",
+ "platformDescription": "Вы можете разрешить регистрацию для следующих платформ. Блокируйте только те платформы, которые не будете поддерживать. Для разрешенных платформ можно настроить дополнительные ограничения развертывания.",
+ "platformSettings": "Параметры платформы",
+ "platforms": "Выбор платформ",
+ "platformsSelected": "Выбрано платформ: {0}",
+ "type": "Тип",
+ "versions": "версии",
+ "versionsRange": "Разрешите диапазон минимальных и максимальных значений:",
+ "windowsTooltip": "Ограничивает регистрацию через Управление мобильными устройствами. Установка с использованием агента для ПК не ограничивается. Поддерживаются только версии Windows 10 и Windows 11. Чтобы разрешить Windows 8.1, оставьте поле версий пустым."
+ },
+ "Priority": {
+ "saved": "Приоритеты ограничений успешно сохранены."
+ },
+ "Row": {
+ "announce": "Приоритет: {0}, имя: {1}, назначено: {2}"
+ },
+ "Table": {
+ "deployed": "Развернуто",
+ "name": "Имя",
+ "priority": "Приоритет"
+ },
+ "Type": {
+ "limit": "Ограничение на число устройств",
+ "type": "Ограничение на типы устройств"
+ },
+ "allUsers": "Все пользователи",
+ "androidRestrictions": "Ограничения Android",
+ "create": "Создать ограничение",
+ "defaultLimitDescription": "Это — ограничение на максимальное число устройств по умолчанию, применяемое с наименьшим приоритетом ко всем пользователям вне зависимости от группы.",
+ "defaultTypeDescription": "Это — ограничение на тип устройств по умолчанию, применяемое с наименьшим приоритетом ко всем пользователям вне зависимости от группы.",
+ "defaultWhfbDescription": "Это конфигурация Windows Hello для бизнеса по умолчанию, применяемая с наименьшим приоритетом ко всем пользователям вне зависимости от группы.",
+ "deleteMessage": "На затронутых пользователей будет распространяться следующее ограничение с самым высоким приоритетом или ограничение по умолчанию, если другие ограничения не назначены.",
+ "deleteTitle": "Вы действительно хотите удалить ограничение {0}?",
+ "descriptionHint": "Короткий текст, содержащий описание бизнес-использования или уровня ограничения, задаваемых параметрами ограничения.",
+ "edit": "Изменить ограничение",
+ "info": "Устройство должно соответствовать приоритетным ограничениям регистрации, назначенным его пользователю. Вы можете перетаскивать ограничения, чтобы изменять их приоритет. Ограничения по умолчанию имеют для всех пользователей самый низкий приоритет, и они предназначены для регистрации без пользователей. Вы можете редактировать ограничения по умолчанию, но не можете их удалять.",
+ "iosRestrictions": "Ограничения iOS",
+ "mDM": "MDM",
+ "macRestrictions": "Ограничения macOS",
+ "maxVersion": "Максимальная версия",
+ "minVersion": "Минимальная версия",
+ "nameHint": "Это основной видимый атрибут для идентификации набора ограничений.",
+ "noAssignmentsStatusBar": "Назначьте ограничение по меньшей мере одной группе. Щелкните \"Свойства\".",
+ "nonAdminForbiddenCreateError": "Для создания, изменения или удаления ограничений необходимо быть администратором службы Intune или глобальным администратором.",
+ "nonAdminForbiddenEdit": "Для изменения ограничений необходимо быть администратором.",
+ "notFound": "Ограничение не найдено. Возможно, оно уже удалено.",
+ "personallyOwned": "Личные устройства",
+ "restriction": "Ограничение",
+ "restrictionLowerCase": "ограничение",
+ "restrictionType": "Тип ограничения",
+ "selectType": "Выбрать тип ограничения",
+ "selectValidation": "Выберите платформу",
+ "typeHint": "Выберите \"Ограничение на типы устройств\", чтобы ограничить их свойства. Выберите \"Ограничение на число устройств\", чтобы ограничить число устройств на пользователя.",
+ "typeRequired": "Требуется тип ограничения.",
+ "winPhoneRestrictions": "Ограничения Windows Phone",
+ "windowsECv1Info": "Старые ограничения регистрации нельзя изменять или перераспределять. Их можно только удалять.",
+ "windowsECv2Info": "Вы можете задать приоритет для ограничений регистрации, перетащив их. Просмотрите ограничения по умолчанию и предварительно настроенные ограничения ниже. Все новые ограничения регистрации будут иметь более высокий приоритет, чем стандартные и предварительно настроенные ограничения.",
+ "windowsRestrictions": "Ограничения Windows",
+ "windowsRestrictionsPreview": "Ограничения Windows на основе фильтров (предварительная версия)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 день",
+ "twoDays": "2 дня",
+ "zeroDays": "0 дней"
+ },
+ "SecurityTemplate": {
+ "aSR": "Сокращение направлений атак",
+ "accountProtection": "Защита учетной записи",
+ "allDevices": "Все устройства",
+ "antivirus": "Антивирус",
+ "antivirusReporting": "Отчеты антивирусных программ (предварительная версия)",
+ "conditionalAccess": "Условный доступ",
+ "deviceCompliance": "Соответствие устройства политике",
+ "diskEncryption": "Шифрование диска",
+ "eDR": "Обнаружение и нейтрализация атак на конечные точки",
+ "ePM": "Управление привилегиями конечной точки",
+ "firewall": "Брандмауэр",
+ "helpSupport": "Справка и поддержка",
+ "setup": "Установка",
+ "wdapt": "Microsoft Defender для конечной точки"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Конфигурация защиты данных"
+ },
+ "OrganizeMailByThread": {
+ "title": "Сообщения в цепочках",
+ "tooltip": "По умолчанию в Outlook используется режим объединения бесед в представление беседы с несколькими цепочками. Если этот параметр отключен, Outlook будет отображать все сообщения по отдельности и не будет группировать их по цепочкам."
+ },
+ "Sync": {
+ "header": "Синхронизация полей контактов с конфигурацией приложений собственных контактов"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
+ "allowBiometricsTitle": "Требовать биометрию для доступа к приложению",
+ "allowBiometricsTooltip": "Для доступа пользователей к приложению на устройстве можно требовать биометрические данные, такие как TouchID или FaceID. Они запрашиваются в дополнение к методу проверки подлинности, выбранному в профиле. Не включайте эту функцию при наличии развернутых политик Защиты приложений Intune, так как они уже содержат требования доступа к управляемым данным. При использовании обеих функций будет возникать множество запросов на доступ к мобильному приложению Outlook. Если не настроить эту функцию, по умолчанию она будет для приложения отключена.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
+ "allowCalendarNotificationsTitle": "Уведомления календаря",
+ "allowCalendarNotificationsTooltip": "Разрешите отображение полных сведений в уведомлениях календаря, если в политике защиты приложений параметр \"Уведомления о данных организации\" имеет значение \"Блокировка данных организации\".",
+ "allowDefaultAppSignatureTitle": "Подпись приложения по умолчанию",
+ "allowDefaultAppSignatureTooltip": "Подпись приложения по умолчанию указывает, будет ли приложение использовать \\\"Получить Outlook для iOS\\\" в качестве подписи по умолчанию во время написания сообщения. Если параметр отключен, подпись по умолчанию не будет использоваться, однако пользователи могут добавить собственную подпись. Если задано значение \\\"Не настроено\\\", параметр приложения по умолчанию включен.",
+ "allowExternalRecipientsMailTipTitle": "Внешние получатели",
+ "allowExternalRecipientsMailTipTooltip": "MailTip внешних получателей отображается, если отправитель добавляет получателя, не работающего в организации, или группу рассылки, в которую входят такие получатели. MailTip информирует отправителя о том, будет ли письмо отправлено получателю за пределами организации, и помогает выбрать подходящие формулировки, тон и содержимое. Доступно только для учетных записей Exchange Online и локальных учетных записей с современной гибридной проверкой подлинности. Если не настроить эту функцию, по умолчанию она будет включена для приложения.",
+ "allowFocusedInboxTitle": "Сортировка почты",
+ "allowFocusedInboxTooltip": "Сортировка почты позволяет разделить папку \\\"Входящие\\\" на две вкладки: \\\"Отсортированные\\\" (где будут самые важные письма) и \\\"Прочее\\\" (куда попадает, чтобы не мешаться, все остальное). Если не настроить эту функцию, по умолчанию она будет для приложения включена.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
+ "allowMailNotificationsTitle": "Уведомления по почте",
+ "allowMailNotificationsTooltip": "Это значение указывает, разрешены ли в Outlook уведомления по почте. Если задать значение \\\"Нет\\\", они будут отключены.",
+ "allowOrgDataOnWearablesTitle": "Данные организации на переносных устройствах",
+ "allowOrgDataOnWearablesTooltip": "Это значение указывает, разрешена ли синхронизация данных Outlook с переносным устройством. Если задать значение \\\"Нет\\\", она будет отключена.",
+ "allowSaveContactsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю изменять параметр синхронизации контактов.",
+ "allowSaveContactsTitle": "Сохранить контакты",
+ "allowSaveContactsTooltip": "При сохранении контактов в собственную адресную книгу мобильного устройства новые звонки и SMS будут связываться с существующими пользовательскими контактами Outlook. Если не настроить эту функцию, по умолчанию она будет для приложения отключена.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
+ "allowSmartReplyTitle": "Предлагаемые ответы",
+ "allowSmartReplyTooltip": "При открытии сообщения Outlook может предлагать ответы под сообщением. Выбранный ответ можно изменить перед отправкой. Если не настроить эту функцию, по умолчанию она будет для приложения включена.",
+ "allowUserChangeGeneralToolTip": "Укажите, разрешено ли пользователю менять настройку.",
+ "allowUserChangeTitle": "Разрешить пользователю менять настройку",
+ "blockExternalImagesAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
+ "blockExternalImagesTitle": "Блокировка внешних изображений",
+ "blockExternalImagesTooltip": "При блокировке внешних изображений приложение не позволит скачивать размещенные в Интернете изображения, встроенные в текст сообщения. Если не настроить эту функцию, по умолчанию она будет для приложения отключена.",
+ "disableAddinsTitle": "Разрешение надстроек",
+ "disableAddinsTooltip": "По умолчанию политика защиты приложений позволяет пользователям использовать сторонние надстройки, но может использоваться для блокировки надстроек с помощью параметра \"Синхронизировать данные приложения, управляемого политикой, с собственными приложениями или надстройками\". Установка для этого параметра значения \"Отключено\" заблокирует надстройки, если для параметра политики защиты приложений установлено значение \"Разрешено\".",
+ "discoverFeedTitle": "Веб-канал обнаружения",
+ "discoverFeedTooltip": "Веб-канал обнаружения отображает ваши самые часто используемые файлы Office. По умолчанию он включен, когда для пользователя включена служба Delve. Если не настроить канал, по умолчанию для приложения используется значение \\\"Включено\\\".",
+ "enableSMIMETitle": "Включить S/MIME",
+ "enableSMIMETooltip": "Укажите, включены ли элементы управления S/MIME при написании электронного письма.",
+ "encryptAllEmails": "Шифровать все сообщения электронной почты",
+ "encryptAllEmailsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю изменять параметр \\\"Шифровать все сообщения электронной почты\\\".",
+ "encryptAllEmailsTooltip": "Укажите, следует ли шифровать все сообщения электронной почты. Шифрование преобразует данные в зашифрованный текст, чтобы их мог прочесть только предполагаемый получатель.",
+ "ldapUrl": "URL-адрес LDAP",
+ "ldapUrlTooltip": "Это имя узла LDAP, где клиенты могут получить открытые ключи шифрования для получателей электронной почты. Сообщения электронной почты будут зашифрованы, когда ключ станет доступен. Поддерживаемые форматы: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Укажите, разрешено ли пользователю менять настройку.",
+ "nativeCalendarSyncMAMOnlyTitle": "Разрешение синхронизации календаря",
+ "nativeCalendarSyncMAMOnlyTooltip": "По умолчанию политика защиты приложений позволяет синхронизировать календарь с собственным приложением календаря, но может использоваться для блокировки доступности календаря. Этот параметр работает независимо от параметра политики защиты приложений и позволяет организациям определять доступность синхронизации календаря для рабочей или учебной учетной записи.",
+ "nativeCalendarSyncTitle": "Синхронизация календарей",
+ "nativeCalendarSyncTooltip": "По умолчанию политика защиты приложений разрешает синхронизацию программы-календаря с собственным приложением \"Календарь\", но может использоваться для блокировки доступности синхронизации календаря с помощью параметра \"Синхронизировать данные из управляемых приложений, с собственными приложениями и надстройками\". Установка для этого параметра значения \"Отключено\" заблокирует синхронизацию календаря, если для параметра политики защиты приложений установлено значение \"Разрешено\".",
+ "playMyEmailsTitle": "Воспроизвести мои письма",
+ "playMyEmailsTooltip": "По умолчанию функция \\\"Воспроизвести мои письма\\\" отключена в приложении, но доступна соответствующим пользователям в виде баннера в папке \\\"Входящие\\\". Если параметру задано значение \\\"Отключено\\\", функция будет недоступна соответствующим пользователям в приложении. Пользователи могут вручную включить эту функцию в приложении, даже если она отключена. Если параметру задано значение \\\"Не настроено\\\", по умолчанию используется значение параметра \\\"Включено\\\", и функция будет доступна соответствующим пользователям.",
+ "signAllEmails": "Подписать все сообщения электронной почты",
+ "signAllEmailsAllowUserChangeTooltip": "Укажите, разрешено ли пользователю изменять параметр \\\"Подписать все сообщения электронной почты\\\".",
+ "signAllEmailsTooltip": "Укажите, следует ли подписывать все сообщения электронной почты. Цифровая подпись подтверждает подлинность сообщения и защищает его содержимое от незаконного изменения при передаче.",
+ "syncAddressTitle": "Адрес",
+ "syncAddressTooltip": "Это значение указывает, следует ли синхронизировать адрес контакта с собственными контактами.",
+ "syncBirthdayTitle": "День рождения",
+ "syncBirthdayTooltip": "Это значение указывает, следует ли синхронизировать день рождения контакта с собственными контактами.",
+ "syncCompanyTitle": "Организация",
+ "syncCompanyTooltip": "Это значение указывает, следует ли синхронизировать название компании контакта с собственными контактами.",
+ "syncDepartmentTitle": "Отдел",
+ "syncDepartmentTooltip": "Это значение указывает, следует ли синхронизировать отдел контакта с собственными контактами.",
+ "syncEmailAddressTitle": "Адрес электронной почты",
+ "syncEmailAddressTooltip": "Это значение указывает, следует ли синхронизировать адрес электронной почты контакта с собственными контактами.",
+ "syncInstantMessagingAddressTitle": "Адрес для обмена мгновенными сообщениями",
+ "syncInstantMessagingAddressTooltip": "Это значение указывает, следует ли синхронизировать адрес для обмена мгновенными сообщениями с собственными контактами.",
+ "syncJobTitleTitle": "Должность",
+ "syncJobTitleTooltip": "Это значение указывает, следует ли синхронизировать должность контакта с собственными контактами.",
+ "syncNicknameTitle": "Псевдоним",
+ "syncNicknameTooltip": "Это значение указывает, следует ли синхронизировать псевдоним контакта с собственными контактами.",
+ "syncNotesTitle": "Notes",
+ "syncNotesTooltip": "Это значение указывает, следует ли синхронизировать заметки контакта с собственными контактами.",
+ "syncPhoneHomeFaxNumberTitle": "Номер домашнего факса",
+ "syncPhoneHomeFaxNumberTooltip": "Это значение указывает, следует ли синхронизировать номер домашнего факса с собственными контактами.",
+ "syncPhoneHomeNumberTitle": "Номер домашнего телефона",
+ "syncPhoneHomeNumberTooltip": "Это значение указывает, следует ли синхронизировать номер домашнего телефона с собственными контактами.",
+ "syncPhoneMobileNumberTitle": "Номер мобильного телефона",
+ "syncPhoneMobileNumberTooltip": "Это значение указывает, следует ли синхронизировать номер мобильного телефона с собственными контактами.",
+ "syncPhoneOtherNumberTitle": "Другой номер телефона",
+ "syncPhoneOtherNumberTooltip": "Это значение указывает, следует ли синхронизировать другой номер телефона с собственными контактами.",
+ "syncPhonePagerNumberTitle": "Номер пейджера",
+ "syncPhonePagerNumberTooltip": "Это значение указывает, следует ли синхронизировать номер пейджера с собственными контактами.",
+ "syncPhoneWorkFaxNumberTitle": "Номер рабочего факса",
+ "syncPhoneWorkFaxNumberTooltip": "Это значение указывает, следует ли синхронизировать номер рабочего факса с собственными контактами.",
+ "syncPhoneWorkNumberTitle": "Номер рабочего телефона",
+ "syncPhoneWorkNumberTooltip": "Это значение указывает, следует ли синхронизировать номер рабочего телефона с собственными контактами.",
+ "syncPrefixTitle": "Префикс имени",
+ "syncPrefixTooltip": "Это значение указывает, следует ли синхронизировать префикс имени контакта с собственными контактами.",
+ "syncSuffixTitle": "Суффикс имени",
+ "syncSuffixTooltip": "Это значение указывает, следует ли синхронизировать суффикс имени контакта с собственными контактами.",
+ "textPredictionsTitle": "Прогнозирование текста",
+ "textPredictionsTooltip": "Outlook может предлагать слова и фразы при создании сообщений. Если Outlook предлагает вариант, проведите, чтобы принять его. Если задано значение \\\"Не настроено\\\", используется параметр приложения по умолчанию со значением \\\"Включено\\\".",
+ "themesEnabledTitle": "Темы включены",
+ "themesEnabledTooltip": "Укажите, разрешено ли пользователю применять настраиваемую визуальную тему."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Используйте эти параметры, чтобы получать оповещения об установке приложений, запрещенных для использования в организации. Выберите тип приложений:
\r\n Запрещенные приложения — список приложений, об установке которых вы хотите получать оповещения. \r\n Утвержденные приложения — список приложений, которые утверждены для использования в вашей организации. Если пользователь устанавливает приложение, не входящее в этот список, вы получаете оповещение. \r\n ",
+ "androidZebraMxZebraMx": "Настройте устройства Zebra, отправив профиль MX в формате XML.",
+ "iosDeviceFeaturesAirprint": "Используйте эти параметры, чтобы настроить устройства iOS для автоматического подключения к AirPrint-совместимым принтерам в вашей сети. Для принтеров вам потребуется знать IP-адрес и путь ресурса.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Настройте расширение приложения, позволяющее использовать единый вход (SSO) для устройств под управлением iOS 13.0 или более поздних версий.",
+ "iosDeviceFeaturesHomeScreenLayout": "Настройте макет для панели закрепления и начальных экранов на устройствах с iOS. На некоторых устройствах могут быть ограничения на количество отображаемых элементов.",
+ "iosDeviceFeaturesIOSWallpaper": "Показ изображения на начальном экране и (или) экране блокировки устройств с iOS.\r\n Чтобы использовать разные изображения на этих двух экранах, создайте один профиль с изображением для экрана блокировки и другой — с изображением начального экрана.\r\n Затем назначьте оба профиля пользователям.\r\n \r\n
\r\n
Максимальный размер файла: 750 КБ
\r\n
Тип файла: PNG, JPG или JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Укажите параметры уведомлений для приложений. Поддерживает iOS 9.3 и более поздних версий.",
+ "iosDeviceFeaturesSharedDevice": "Введите дополнительный текст, который будет отображаться на заблокированном экране. Поддерживается в iOS 9.3 и более поздних версиях. Дополнительные сведения",
+ "iosGeneralApplicationRestrictions": "Используйте эти параметры, чтобы получать оповещения об установке приложений, запрещенных для использования в организации. Выберите тип приложений:
\r\n Запрещенные приложения — список приложений, об установке которых вы хотите получать оповещения. \r\n Утвержденные приложения — список приложений, которые утверждены для использования в вашей организации. Если пользователь устанавливает приложение, не входящее в этот список, вы получаете оповещение. \r\n ",
+ "iosGeneralApplicationVisibility": "Используйте список отображаемых приложений, чтобы указать те приложения для iOS, которые пользователь может просматривать или запускать. Используйте список скрываемых приложений, чтобы указать приложения для iOS, которые пользователь не сможет просматривать или запускать.",
+ "iosGeneralAutonomousSingleAppMode": "Приложения, которые вы добавляете в этот список и назначаете устройству, могут препятствовать запуску остальных приложений или блокировать устройство при выполнении определенного действия (например, прохождении теста). После завершения действия или удаления ограничения устройство возвращается в обычное состояние.",
+ "iosGeneralKiosk": "Режим киоска блокирует различные параметры на устройстве или задает одно приложение, которое может работать на устройстве. Это может быть полезно в таких местах, как магазины, где на устройстве нужно запустить только одно демонстрационное приложение.",
+ "macDeviceFeaturesAirprint": "Используйте эти параметры, чтобы настроить на устройствах с macOS автоматическое подключение к совместимым принтерам AirPrint в сети. Вам потребуется IP-адрес и путь к ресурсам принтеров.",
+ "macDeviceFeaturesAssociatedDomains": "Настройка связанных доменов, позволяющих использовать общие данные и учетные данные для входа в приложениях и на веб-сайтах вашей организации. Этот профиль можно применять к устройствам под управлением macOS 10.15 или более поздних версий.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Настройте расширение приложения, позволяющее использовать единый вход (SSO) для устройств под управлением macOS 10.15 или более поздних версий.",
+ "macDeviceFeaturesLoginItems": "Выберите, какие приложения, файлы и папки будут открываться при входе пользователей на устройства. Чтобы пользователи не могли изменять способ открытия выбранных приложений, вы можете скрыть эти приложения из пользовательских настроек.",
+ "macDeviceFeaturesLoginWindow": "Настройка внешнего вида экрана входа macOS и функций, которые доступны пользователям после входа в систему.",
+ "macExtensionsKernelExtensions": "Используйте эти параметры для настройки политики расширения ядра на устройствах под управлением macOS 10.13.2 или более поздних версий.",
+ "macGeneralDomains": "Электронные адреса, по которым пользователь отправляет и получает почту и в которых не используются указанные здесь домены, будут помечены как ненадежные.",
+ "windows10EndpointProtectionApplicationGuard": "При использовании Microsoft Edge компонент Application Guard в Microsoft Defender защищает вашу среду от сайтов, которые не были определены как доверенные вашей организацией. Когда пользователи переходят на сайты, не указанные в вашей границе изолированной сети, эти сайты открываются в виртуальном сеансе браузера в Hyper-V. Доверенные сайты определяются границей сети, которую можно настроить в разделе \"Конфигурация устройства\". Обратите внимание, что эта функция доступна только для устройств под управлением Windows 10 (64-разрядная версия) или более поздней версии.",
+ "windows10EndpointProtectionCredentialGuard": "Включение Credential Guard затрагивает следующие обязательные параметры.\r\n \r\n
\r\n
Включить функции безопасности на основе виртуализации: включение виртуализации на основе безопасности (VBS) при следующей перезагрузке. Безопасность на основе виртуализации использует низкоуровневую оболочку Windows для поддержки устройств безопасности.
\r\n \r\n
Безопасная загрузка с прямым доступом к памяти: включение VBS с безопасной загрузкой и прямым доступом к памяти (DMA).
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Выберите другие приложения, для которых необходим аудит со стороны компонента управления приложениями в Microsoft Defender либо которые можно считать надежными для запуска с точки зрения этого компонента. Надежными для запуска автоматически считаются компоненты Windows и все приложения из Магазина Windows.
\r\n При запуске в режиме \"Только аудит\" приложения не блокируются. В режиме \"Только аудит\" все события записываются в локальные журналы клиентов.\r\n ",
+ "windows10GeneralPrivacyPerApp": "Добавьте приложения, поведение конфиденциальности которых должно отличаться от заданного в разделе \"Конфиденциальность по умолчанию\".",
+ "windows10NetworkBoundaryNetworkBoundary": "Граница сети представляет собой список корпоративных ресурсов, таких как облачный домен, и диапазонов IP-адресов для компьютеров в корпоративной сети. Определите границы сети, чтобы применять политики для защиты данных, находящихся в этих расположениях.",
+ "windowsHealthMonitoring": "Настройте политику мониторинга работоспособности Windows.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone может заблокировать установку или запуск приложений из списка запрещенных приложений либо приложений, отсутствующих в утвержденном списке. Все управляемые приложения следует добавить в утвержденный список."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Не удается блокировать только выбранные приложения на этапе технического обслуживания",
+ "apps": "приложения",
+ "appsListName": "Список приложений",
+ "blockingApps": "Блокировка приложений",
+ "managedApps": "Управляемые приложения",
+ "noApps": "Нет приложений",
+ "noAppsError": "Ошибка при получении приложений.",
+ "selectApps": "Выбрать приложения",
+ "selectedAppsCount": "Выбрано приложений: {0} (максимум 100)",
+ "useSelectedAppsAll": "Все",
+ "useSelectedAppsSelected": "Выбрано",
+ "useSelectedAppsToggleLabel": "Блокировать использование устройства до тех пор, пока не будут установлены необходимые приложения, если они назначены пользователю или устройству."
+ },
+ "Header": {
+ "application": "Приложение",
+ "publisher": "Издатель",
+ "version": "Версия"
+ },
+ "SearchBox": {
+ "ariaLabel": "Поиск приложений",
+ "placeHolder": "Поиск по имени или издателю"
+ },
+ "allowToUseToggle": "Разрешить пользователям использовать устройство при ошибке установки",
+ "blockToggle": "Блокировать использование устройства до установки всех приложений и профилей",
+ "blockToolTip": "Например, если добавить Microsoft Word в этот список, целевые пользователи и устройства не смогут покинуть страницу состояния регистрации, пока Word не будет установлен.",
+ "collectLogToggle": "Включить сбор журналов и страницу диагностики для конечных пользователей",
+ "create": "Создание профиля",
+ "customMessageTextBox": "Сообщение об ошибке",
+ "customMessageToggle": "Показывать пользовательское сообщение при достижении ограничения по времени или возникновении ошибки",
+ "enableForAutopilotOnlyToggle": "Показывать только страницы для устройств, подготовленных при запуске во время первого включения компьютера",
+ "installQualityUpdatesToggle": "Установите обновления качества Windows (может перезагрузить устройство) (предварительная версия)",
+ "progressToggle": "Отобразить ход настройки приложений и профилей",
+ "resetToggle": "Разрешить пользователям сбросить параметры устройства при ошибке установки",
+ "timeout": "Отобразить ошибку, если установка занимает больше указанного времени в минутах"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Свойство",
+ "rule": "Правило",
+ "ruleDetails": "Сведения о правиле",
+ "value": "Значение"
+ },
+ "assignIf": "Назначить профиль, если",
+ "deleteWarning": "Это приведет к удалению выбранного правила применимости.",
+ "dontAssignIf": "Не назначать профиль, если",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "и еще {0}",
+ "instructions": "Укажите, как применить этот профиль в назначенной группе. Intune применит профиль только к устройствам, соответствующим объединенным критериям этих правил.",
+ "maxText": "Максимум",
+ "minText": "Минимум",
+ "noActionRow": "Правила применимости не указаны.",
+ "oSVersion": "Пример: 1.2.3.4.",
+ "toText": "по",
+ "windows10Education": "Windows 10/11 для образовательных учреждений",
+ "windows10EducationN": "Windows 10/11 для образовательных учреждений N",
+ "windows10Enterprise": "Windows 10/11 Корпоративная",
+ "windows10EnterpriseN": "Windows 10/11 Корпоративная N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic для бизнеса",
+ "windows10Home": "Windows 10/11 Домашняя",
+ "windows10HomeChina": "Windows 10 Домашняя (Китай)",
+ "windows10HomeN": "Windows 10/11 Домашняя N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Домашняя для одного языка",
+ "windows10IoTCore": "Windows 10 IoT Базовая",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Базовая для коммерческих организаций",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Корпоративная",
+ "windows10OsEdition": "Выпуск ОС",
+ "windows10OsVersion": "Версия ОС",
+ "windows10Professional": "Windows 10/11 Профессиональная",
+ "windows10ProfessionalEducation": "Windows 10/11 профессиональная для образовательных учреждений",
+ "windows10ProfessionalEducationN": "Windows 10/11 Профессиональная для образовательных учреждений N",
+ "windows10ProfessionalN": "Windows 10 Профессиональная N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Профессиональная Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Профессиональная Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Разрешить пользователю менять настройку",
+ "tooltip": "Укажите, разрешено ли пользователю менять настройку."
+ },
+ "AllowWorkAccounts": {
+ "title": "Разрешение только рабочих и учебных учетных записей",
+ "tooltip": " При включении этого параметра пользователи не смогут добавить личный адрес электронной почты и учетные записи хранения в Outlook. Если у пользователя добавлена в Outlook личная учетная запись, ему потребуется ее удалить. Если он этого не сделает, добавить рабочую или учебную учетную запись будет невозможно."
+ },
+ "BlockExternalImages": {
+ "title": "Блокировка внешних изображений",
+ "tooltip": "При блокировке внешних изображений приложение не позволит скачивать размещенные в Интернете изображения, встроенные в текст сообщения. Если не настроить эту функцию, по умолчанию она будет для приложения отключена."
+ },
+ "ConfigureEmail": {
+ "title": "Параметры учетной записи электронной почты"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Подпись приложения по умолчанию указывает, будет ли приложение использовать \"Получить Outlook для Android\" в качестве подписи по умолчанию во время написания сообщения. Если параметр отключен, подпись по умолчанию не будет использоваться, однако пользователи могут добавить собственную подпись.\r\n\r\nЕсли задано значение \"Не настроено\", параметр приложения по умолчанию включен.",
+ "iOS": "Подпись приложения по умолчанию указывает, будет ли приложение использовать \"Получить Outlook для iOS\" в качестве подписи по умолчанию во время написания сообщения. Если параметр отключен, подпись по умолчанию не будет использоваться, однако пользователи могут добавить собственную подпись.\r\n\r\nЕсли задано значение \"Не настроено\", параметр приложения по умолчанию включен."
+ },
+ "title": "Подпись приложения по умолчанию"
+ },
+ "OfficeFeedReplies": {
+ "title": "Веб-канал обнаружения",
+ "tooltip": "Веб-канал обнаружения отображает ваши самые часто используемые файлы Office. По умолчанию он включен, когда для пользователя включена служба Delve. Если не настроить канал, по умолчанию для приложения используется значение \"Включено\"."
+ },
+ "OrganizeMailByThread": {
+ "title": "Сообщения в цепочках",
+ "tooltip": "По умолчанию в Outlook используется режим объединения бесед в представление беседы с несколькими цепочками. Если этот параметр отключен, Outlook будет отображать все сообщения по отдельности и не будет группировать их по цепочкам."
+ },
+ "PlayMyEmails": {
+ "title": "Воспроизвести мои письма",
+ "tooltip": "По умолчанию функция \"Воспроизвести мои письма\" отключена в приложении, но доступна соответствующим пользователям в виде баннера в папке \"Входящие\". Если параметру задано значение \"Отключено\", функция будет недоступна соответствующим пользователям в приложении. Пользователи могут вручную включить эту функцию в приложении, даже если она отключена. Если параметру задано значение \"Не настроено\", по умолчанию используется значение параметра \"Включено\", и функция будет доступна соответствующим пользователям."
+ },
+ "SuggestedReplies": {
+ "title": "Предлагаемые ответы",
+ "tooltip": "Outlook может предлагать варианты ответов в нижней части при открытии сообщения. Выбрав предложенный ответ, вы можете изменить его перед отправкой."
+ },
+ "SyncCalendars": {
+ "title": "Синхронизация календарей",
+ "tooltip": "Укажите, могут ли пользователи синхронизировать свой календарь Outlook с собственным приложением календаря и базой данных."
+ },
+ "TextPredictions": {
+ "title": "Прогнозирование текста",
+ "tooltip": "Outlook может предлагать слова и фразы при создании сообщений. Если Outlook предлагает вариант, проведите, чтобы принять его. Если задано значение \"Не настроено\", используется параметр приложения по умолчанию со значением \"Включено\"."
+ },
+ "ThemesEnabled": {
+ "title": "Темы включены",
+ "tooltip": "Укажите, разрешено ли пользователю применять настраиваемую визуальную тему."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "Устройства ChromeOS"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Контакты администратора",
+ "appPackaging": "Упаковка приложений",
+ "autopatchGroups": "Группы автоисправления",
+ "devices": "Устройства",
+ "featureEnablement": "Активация возможностей",
+ "feedback": "Отзывы и предложения",
+ "gettingStarted": "Приступая к работе",
+ "messages": "Сообщения",
+ "onlineResources": "Интернет-ресурсы",
+ "policyHealth": "Работоспособность политики",
+ "policyHealthPreview": "Работоспособность политики (предварительная версия)",
+ "releaseManagement": "Управление выпусками",
+ "serviceRequests": "Запросы на обслуживание",
+ "settings": "Параметры",
+ "supportRequests": "Запросы в службу поддержки",
+ "tenantEnrollment": "Регистрация клиента",
+ "tenantManagement": "Управление клиентами"
+ },
+ "actions": "Действия для несоответствия",
+ "advancedExchangeSettings": "Параметры Exchange Online",
+ "advancedThreatProtection": "Microsoft Defender для конечной точки",
+ "allApps": "Все приложения",
+ "allDevices": "Все устройства",
+ "androidFotaDeployments": "Развертывания Android FOTA",
+ "appBundles": "Пакеты приложений",
+ "appCategories": "Категории приложений",
+ "appConfigPolicies": "Политики конфигурации приложений",
+ "appConfigurationStatus": "Состояние конфигурации приложений",
+ "appInstallStatus": "Состояние установки приложения",
+ "appLicences": "Лицензии на приложения",
+ "appProtectionPolicies": "Политики защиты приложений",
+ "appProtectionStatus": "Состояние защиты приложений",
+ "appSelectiveWipe": "Выборочная очистка приложений",
+ "appleVppTokens": "Токены Apple VPP",
+ "apps": "Приложения",
+ "assign": "Назначения",
+ "assignedPermissions": "Назначенные разрешения",
+ "assignedRoles": "Назначенные роли",
+ "autopilotDeploymentReport": "Развертывания Autopilot (предварительная версия)",
+ "autopilotDeploymentReportV2": "Развертывание Autopilot 2.0 (предварительная версия)",
+ "brandingAndCustomization": "Настройка",
+ "cartProfiles": "Профили для покупок",
+ "certificateConnectors": "Соединители сертификатов",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Устройства с присоединением к облаку (предварительная версия)",
+ "cloudPcActions": "Действия облачного компьютера (предварительная версия)",
+ "cloudPcMaintenanceWindows": "Периоды обслуживания облачного компьютера (предварительная версия)",
+ "compliancePolicies": "Политики соответствия",
+ "complianceScriptManagement": "Сценарии",
+ "complianceScriptManagementPreview": "Сценарии (предварительная версия)",
+ "complianceSettings": "Параметры политики соответствия",
+ "conditionStatements": "Условные операторы",
+ "conditions": "Расположения",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Профили конфигурации",
+ "configurationScripts": "Сценарии конфигурации",
+ "connectorsAndTokens": "Соединители и токены",
+ "corporateDeviceIdentifiers": "Идентификаторы корпоративных устройств",
+ "customAttributes": "Настраиваемые атрибуты",
+ "customAttributesMacOS": "Настраиваемые атрибуты для macOS",
+ "customNotifications": "Настраиваемые уведомления",
+ "deploymentSettings": "Параметры развертывания",
+ "derivedCredentials": "Производные учетные данные",
+ "deviceActions": "Действия устройства",
+ "deviceCategories": "Категории устройств",
+ "deviceCleanUp": "Правила очистки устройств",
+ "deviceEnrollmentManagers": "Менеджеры регистрации устройств",
+ "deviceExecutionStatus": "Состояние устройства",
+ "deviceLimitEnrollmentRestrictions": "Ограничения количества устройств для регистрации",
+ "deviceTypeEnrollmentRestrictions": "Ограничения количества устройств платформы для регистрации",
+ "devices": "Устройства",
+ "discoveredApps": "Обнаруженные приложения",
+ "edgePolicies": "Политики для Microsoft Edge",
+ "embeddedSIM": "Профили сотовой связи eSIM (предварительная версия)",
+ "enrollDevices": "Регистрация устройств",
+ "enrollmentFailures": "Сбои регистрации",
+ "enrollmentNotifications": "Уведомления о регистрации (предварительная версия)",
+ "enrollmentRestrictions": "Ограничения регистрации",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Соединители сервисов Exchange",
+ "failuresForCumulativeQualityUpdates": "Сбои накопительных исправлений Windows",
+ "failuresForDriverUpdates": "Сбои обновления драйверов Windows",
+ "failuresForFeatureUpdates": "Сбои при обновлении компонентов",
+ "failuresForQualityUpdates": "Ошибки ускоренного обновления Windows",
+ "featureFlighting": "Фокус-тестирование функций",
+ "featureUpdateDeployments": "Обновление компонентов для Windows 10 и более поздних версий",
+ "flighting": "Фокус-тестирование",
+ "fotaUpdate": "Обновление по воздуху для встроенного ПО",
+ "groupPolicy": "Административные шаблоны",
+ "groupPolicyAnalytics": "Анализ групповой политики",
+ "helpSupport": "Справка и поддержка",
+ "helpSupportReplacement": "Справка и поддержка ({0})",
+ "iOSAppProvisioning": "Профили подготовки приложений iOS",
+ "incompleteUserEnrollments": "Неполные регистрации пользователей",
+ "iosUpdates": "Обновления iOS/iPadOS",
+ "legacyPcManagement": "Традиционное управление ПК",
+ "macOSSoftwareUpdate": "Обновления macOS",
+ "macOSSoftwareUpdateAccountSummaries": "Состояние установки для устройств с macOS",
+ "macOSSoftwareUpdateCategorySummaries": "Сводка обновлений ПО",
+ "macOSSoftwareUpdateStateSummaries": "обновления",
+ "managedGooglePlay": "Управляемый Google Play",
+ "msfb": "Магазин Майкрософт для бизнеса",
+ "myPermissions": "Мои разрешения",
+ "notifications": "Уведомления",
+ "officeApps": "Приложения Office",
+ "officeProPlusPolicies": "Политики для приложений Office",
+ "onPremise": "Локальные",
+ "onPremisesConnector": "Локальный соединитель Exchange ActiveSync",
+ "onPremisesDeviceAccess": "Устройства Exchange ActiveSync",
+ "onPremisesManageAccess": "Локальный доступ к Exchange",
+ "outOfDateIosDevices": "Ошибки установки для устройств с iOS",
+ "overview": "Обзор",
+ "partnerDeviceManagement": "Управление партнерскими устройствами",
+ "perUpdateRingDeploymentState": "По состоянию развертывания кольца обновления",
+ "permissions": "Разрешения",
+ "platformApps": "Приложений: {0}",
+ "platformDevices": "Устройств: {0}",
+ "platformEnrollment": "Регистрация {0}",
+ "policies": "Политики",
+ "profiles": "Профили",
+ "properties": "Свойства",
+ "reports": "Отчеты",
+ "retireNoncompliantDevices": "Прекращение использования несоответствующих устройств",
+ "retireNoncompliantDevicesPreview": "Прекращение использования несоответствующих устройств (предварительная версия)",
+ "role": "Роль",
+ "scriptManagement": "Сценарии",
+ "securityBaselines": "Базовые показатели безопасности",
+ "serviceToServiceConnector": "Соединитель Exchange Online",
+ "servicenowConnector": "Соединитель ServiceNow",
+ "shellScripts": "Скрипты оболочки",
+ "teamViewerConnector": "Соединитель TeamViewer",
+ "telecomeExpenseManagement": "Управление затратами на телекоммуникации",
+ "tenantAdmin": "Администратор клиента",
+ "tenantAdministration": "Администрирование клиента",
+ "termsAndConditions": "Условия",
+ "titles": "Названия",
+ "troubleshoot": "Устранение неполадок",
+ "troubleshootSupport": "Устранение неполадок и поддержка",
+ "user": "Пользователь",
+ "userExecutionStatus": "Состояние пользователя",
+ "wdacSupplementalPolicies": "Дополнительные политики режима S",
+ "win32CatalogUpdateApp": "Обновления для приложений управления корпоративными приложениями",
+ "win32CatalogUpdateAppInPreview": "Обновления для приложений каталога Windows (Win32) (предварительная версия)",
+ "win32CatalogUpdateAppPreviewTitle": "Приложения каталога корпоративных приложений с обновлениями (предварительная версия)",
+ "win32CatalogUpdateAppTitle": "Каталог корпоративных приложений с обновлениями",
+ "windows10DriverUpdate": "Обновления драйверов для Windows 10 и более поздних версий",
+ "windows10QualityUpdate": "Исправления для Windows 10 и более поздних версий",
+ "windows10UpdateRings": "Круги обновления для Windows 10 и более поздних версий",
+ "windows10XPolicyFailures": "Сбои политики Windows 10X",
+ "windows365PartnerConnector": "Соединители партнеров Windows 365",
+ "windowsDiagnosticData": "Данные Windows",
+ "windowsEnterpriseCertificate": "Сертификат Windows Корпоративная",
+ "windowsManagement": "Сценарии",
+ "windowsSideLoadingKeys": "Ключи загрузки неопубликованных приложений Windows",
+ "windowsSymantecCertificate": "Сертификат Windows DigiCert",
+ "windowsThreatReport": "Состояние агента угроз"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Разрешить пользователям открывать данные из выбранных служб",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Выберите количество предыдущих значений ПИН-кода, которые будут сохранены"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "Для всех политик соответствия требуется одна блокировка.",
- "graceperiod": "Расписание (дни после наступления несоответствия)",
- "graceperiodInfo": "Укажите срок несоответствия в днях, по истечении которого следует применить это действие к устройству пользователя.",
- "subtitle": "Укажите параметры действия.",
- "title": "Параметры действия"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Сделать доступным для пользователей в качестве необязательного обновления",
+ "optionalValue": "Необязательное",
+ "required": "Сделать доступным для пользователей в качестве обязательного обновления",
+ "requiredValue": "Обязательное"
},
- "List": {
- "gracePeriodDay": "{0} день после наступления несоответствия",
- "gracePeriodDays": "{0} дн. после наступления несоответствия",
- "gracePeriodHour": "{0} ч после наступления несоответствия",
- "gracePeriodHours": "{0} ч после наступления несоответствия",
- "gracePeriodMinute": "{0} мин после наступления несоответствия",
- "gracePeriodMinutes": "{0} мин после наступления несоответствия",
- "immediately": "Немедленно",
- "schedule": "Расписание",
- "scheduleInfoBalloon": "Число дней после наступления несоответствия",
- "subtitle": "Укажите последовательность действий для несоответствующих устройств.",
- "title": "Действия"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Системное приложение Android Enterprise",
+ "androidForWorkApp": "Приложение управляемого Google Play Маркета",
+ "androidLobApp": "Бизнес-приложение для Android",
+ "androidStoreApp": "Приложение для Магазина Android",
+ "builtInAndroid": "Встроенное приложение для Android",
+ "builtInApp": "Встроенное приложение",
+ "builtInIos": "Встроенное приложение для iOS",
+ "default": "",
+ "iosIPadOSWebClip": "Веб-клип для iOS и iPadOS",
+ "iosLobApp": "Бизнес-приложение для iOS",
+ "iosStoreApp": "Приложение iOS Store",
+ "iosVppApp": "Приложение iOS Volume Purchase Program",
+ "lineOfBusinessApp": "Бизнес-приложение",
+ "macOSDmgApp": "Приложение macOS (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Бизнес-приложение macOS",
+ "macOSMicrosoftDefenderApp": "ATP в Microsoft Defender (macOS)",
+ "macOSOfficeSuiteApp": "Приложения Microsoft 365 (macOS)",
+ "macOSPkgApp": "Приложение macOS (PKG)",
+ "macOSWebClip": "Веб-клип macOS",
+ "macOsVppApp": "Приложение macOS Volume Purchase Program",
+ "managedAndroidLobApp": "Управляемое бизнес-приложение для Android",
+ "managedAndroidStoreApp": "Управляемое приложение Магазина Android",
+ "managedGooglePlayApp": "Приложение управляемого Google Play Маркета",
+ "managedGooglePlayPrivateApp": "Частное приложение управляемого Google Play",
+ "managedGooglePlayWebApp": "Веб-ссылка управляемого Google Play",
+ "managedIosLobApp": "Управляемое бизнес-приложение для iOS",
+ "managedIosStoreApp": "Управляемое приложение Магазина iOS",
+ "microsoftStoreForBusinessApp": "Приложение Магазина Майкрософт для бизнеса",
+ "microsoftStoreForBusinessReleaseManagedApp": "Магазин Майкрософт для бизнеса",
+ "officeSuiteApp": "Приложения Microsoft 365 (Windows 10 и более поздних версий)",
+ "webApp": "Веб-ссылка",
+ "windowsAppXLobApp": "Бизнес-приложение Windows AppX",
+ "windowsClassicApp": "Приложение Windows (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 и более поздних версий)",
+ "windowsMobileMsiLobApp": "Бизнес-приложение Windows MSI",
+ "windowsPhone81AppXBundleLobApp": "Бизнес-приложение Windows Phone 8.1 AppX",
+ "windowsPhone81AppXLobApp": "Бизнес-приложение Windows Phone 8.1 AppX",
+ "windowsPhone81StoreApp": "Приложение Магазина Windows Phone 8.1",
+ "windowsPhoneXapLobApp": "Бизнес-приложение Windows Phone XAP",
+ "windowsStoreApp": "Приложение Microsoft Store (прежних версий)",
+ "windowsUniversalAppXLobApp": "Универсальное бизнес-приложение Windows AppX",
+ "windowsUniversalLobApp": "Универсальное бизнес-приложение Windows",
+ "windowsWebApp": "Веб-ссылка Windows"
+ },
+ "PolicySet": {
+ "appManagement": "Управление приложениями",
+ "assignments": "Назначения",
+ "basics": "Основные",
+ "deviceEnrollment": "Регистрация устройства",
+ "deviceManagement": "Управление устройствами",
+ "scopeTags": "Теги области",
+ "appConfigurationTitle": "Политики конфигурации приложений",
+ "appProtectionTitle": "Политики защиты приложений",
+ "appTitle": "Приложения",
+ "iOSAppProvisioningTitle": "Профили подготовки приложений iOS",
+ "deviceLimitRestrictionTitle": "Ограничения числа устройств",
+ "deviceTypeRestrictionTitle": "Ограничения по типу устройств",
+ "enrollmentStatusSettingTitle": "Страницы состояния регистрации",
+ "windowsAutopilotDeploymentProfileTitle": "Профили развертывания Windows Autopilot",
+ "deviceComplianceTitle": "Политики соответствия устройств",
+ "deviceConfigurationTitle": "Профили конфигурации устройств",
+ "powershellScriptTitle": "Сценарии PowerShell"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Установка приложения может привести к перезапуску устройства",
+ "basedOnReturnCode": "Определять режим по кодам возврата",
+ "force": "Intune выполнит принудительную перезагрузку устройства",
+ "suppress": "Никаких действий выполняться не будет"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Требуемое время установки (в минутах)",
+ "maxRunTimeInMinutesToolTip": "Количество минут, в течение которого система будет ожидать завершения установки программы. Значение по умолчанию — 60 минут."
+ },
+ "RunAsAccountOptions": {
+ "system": "Система",
+ "user": "Пользователь"
+ },
+ "availableUninstall": "Разрешить доступное удаление",
+ "availableUninstallTooltip": "Выберите \"Да\", чтобы предоставить пользователям возможность удаления этого приложения с Корпоративного портала. Выберите \"Нет\", чтобы запретить пользователям удалять приложение с Корпоративного портала.",
+ "bladeTitle": "Программа",
+ "deviceRestartBehavior": "Действие при перезагрузке устройства",
+ "deviceRestartBehaviorTooltip": "Выберите режим перезагрузки устройства после успешной установки приложения. Выберите \"Определять режим по кодам возврата\", чтобы перезагрузить устройство на основе параметров конфигурации кодов возврата. Выберите \"Никаких действий выполняться не будет\" для подавления перезагрузки устройства во время установки приложения на основе MSI. Выберите \"Установка приложения может принудительно выполнить перезагрузку устройства\", чтобы позволить установке приложения завершиться без подавления перезагрузок. Выберите \"Intune выполнит принудительную перезагрузку устройства\", чтобы всегда перезагружать устройство после успешной установки приложения.",
+ "header": "Укажите команды для установки и удаления этого приложения:",
+ "installCommand": "Команда установки",
+ "installCommandMaxLengthErrorMessage": "Длина команды установки не может превышать допустимый максимум в 1024 символа.",
+ "installCommandTooltip": "Командная строка завершения установки, используемая для установки этого приложения.",
+ "runAs32Bit": "Запуск команд установки и удаления в 32-разрядном процессе на 64-разрядных клиентах",
+ "runAs32BitTooltip": "Выберите \"Да\" для установки и удаления приложения в 32-разрядном процессе на 64-разрядных клиентах. Выберите \"Нет\" (по умолчанию) для установки и удаления приложения в 64-разрядном процессе на 64-разрядных клиентах. 32-разрядные клиенты всегда будут использовать 32-разрядный процесс.",
+ "runAsAccount": "Поведение при установке",
+ "runAsAccountTooltip": "Выберите \"Система\", чтобы установить приложение для всех пользователей, если это поддерживается. Выберите \"Пользователь\", чтобы установить приложение для пользователя, выполнившего вход на устройстве. В приложениях MSI двойного назначения внесение изменений сделает невозможным установку обновлений и удаление, пока не будет восстановлено значение, использованное на устройстве при первоначальной установке.",
+ "selectorLabel": "Программа",
+ "uninstallCommand": "Команда удаления",
+ "uninstallCommandTooltip": "Командная строка завершения удаления, используемая для удаления этого приложения."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Другие",
- "additionalRecipients": "Дополнительные получатели (по электронной почте)",
- "additionalRecipientsBladeTitle": "Выбор дополнительных получателей",
- "emailAddressPrompt": "Введите адреса электронной почты (через запятую)",
- "invalidEmail": "Недопустимый адрес электронной почты",
- "messageTemplate": "Шаблон сообщения",
- "noneSelected": "Выбранных нет",
- "notSelected": "Не выбрано",
- "numSelected": "Выбрано: {0}",
- "selected": "Выбрано"
- },
- "block": "Отметить устройство как несоответствующее политике",
- "lockDevice": "Блокировка устройства (локальное действие)",
- "lockDeviceWithPasscode": "Блокировка устройства (локальное действие)",
- "noAction": "Нет действий",
- "noActionRow": "Нет действий; выберите команду \"Добавить\", чтобы добавить действие.",
- "pushNotification": "Отправить push-уведомление пользователю",
- "remoteLock": "Удаленно заблокировать несовместимое устройство",
- "removeSourceAccessProfile": "Удалить профиль доступа к источнику",
- "retire": "Добавить устройство в список прекращения поддержки",
- "wipe": "Очистка",
- "emailNotification": "Отправить сообщение электронной почты пользователю"
- },
- "InstallIntent": {
- "available": "Доступно для зарегистрированных устройств",
- "availableWithoutEnrollment": "Доступно с регистрацией или без регистрации",
- "required": "Обязательно",
- "uninstall": "Удалить"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Создание настраиваемого сценария",
- "edit": "Изменение настраиваемого сценария"
- },
- "basicInfo": "Создайте новый настраиваемый пакет сценариев на основе написанных вами сценариев обнаружения и исправления.",
- "customScriptCapitalized": "Пользовательский сценарий",
- "customScriptLowercase": "пользовательский сценарий",
- "detectionScript": "Сценарий обнаружения"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Разрешить использование строчных букв в ПИН-коде",
+ "notAllow": "Запретить использование строчных букв в ПИН-коде",
+ "requireAtLeastOne": "Требовать по меньшей мере одну строчную букву в ПИН-коде"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Разрешить использование специальных символов в ПИН-коде",
+ "notAllow": "Запретить использование специальных символов в ПИН-коде",
+ "requireAtLeastOne": "Требовать по меньшей мере один специальный символ в ПИН-коде"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Разрешить использование прописных букв в ПИН-коде",
+ "notAllow": "Запретить использование прописных букв в ПИН-коде",
+ "requireAtLeastOne": "Требовать по меньшей мере одну прописную букву в ПИН-коде"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Создать",
+ "createNewResourceAccountInfo": "
\r\nСоздание новой учетной записи ресурса во время регистрации. Учетная запись ресурса будет добавлена в таблицу учетных записей ресурсов сразу же, но будет неактивна до регистрации устройства и проверки подписки Surface Hub. Подробнее об учетных записях ресурсов.
\r\n ",
+ "createNewResourceTitle": "Создание учетной записи ресурса",
+ "deviceNameInvalid": "Имя устройства имеет недопустимый формат",
+ "deviceNameRequired": "Требуется имя устройства",
+ "editResourceAccountLabel": "Изменить",
+ "selectExistingCommandMenu": "Выбрать существующую"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "Имена должны быть длиной до 15 символов и могут включать буквы (a–z, A–Z), цифры (0–9) и дефисы. Имена только из цифр недопустимы, и они не могут включать пробелы."
+ },
+ "Header": {
+ "addressableUserName": "Понятное имя",
+ "azureADDevice": "Связанное устройство Microsoft Entra",
+ "batch": "Тег группы",
+ "dateAssigned": "Дата назначения",
+ "deviceAccountPwd": "Пароль учетной записи устройства",
+ "deviceAccountUpn": "Учетная запись устройства",
+ "deviceDisplayName": "Имя устройства",
+ "deviceFriendlyName": "Понятное имя устройства",
+ "deviceName": "имя устройства.",
+ "deviceUseType": "Тип использования устройства",
+ "enrollmentState": "Состояние регистрации",
+ "intuneDevice": "Связанное устройство Intune",
+ "lastContacted": "Последнее обращение",
+ "make": "Изготовитель",
+ "model": "Модель",
+ "profile": "Присвоенный профиль",
+ "profileStatus": "Состояние профиля",
+ "purchaseOrderId": "Заказ на поставку",
+ "resourceAccount": "Учетная запись ресурса",
+ "serialNumber": "серийный номер;",
+ "userPrincipalName": "Пользователь"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Требуется понятное имя",
+ "pwdRequired": "Требуется пароль",
+ "pwdValidFormat": "Не удалось обновить пароль. Значение, указанное для нового пароля, не соответствует требованиям домена к длине или сложности.",
+ "upnRequired": "Требуется учетная запись устройства",
+ "upnValidFormat": "Значения могут содержать буквы (a–z, A–Z), цифры (0–9) и дефисы. Значения не могут содержать пробел."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Собрания и презентации",
+ "teamCollaboration": "Совместная работа в команде"
+ },
+ "Devices": {
+ "featureDescription": "Windows Autopilot позволяет настроить запуск при первом включении компьютера для пользователей.",
+ "importErrorStatus": "Некоторые устройства не были импортированы. Щелкните здесь, чтобы получить дополнительные сведения.",
+ "importPendingStatus": "Идет импорт. Затраченное время: {0} мин. Процесс может занять до {1} мин."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Гибридное соединение Microsoft Entra",
+ "activeDirectoryADLabel": "Гибридное присоединение к Microsoft Entra с Autopilot",
+ "azureAD": "Присоединение к Microsoft Entra",
+ "unknownType": "Неизвестный тип"
+ },
+ "Filter": {
+ "enrollmentState": "Состояние",
+ "profile": "Состояние профиля"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "Понятное имя пользователя не может быть пустым."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Создайте шаблон именования, чтобы добавить имена устройств во время регистрации.",
+ "label": "Применить шаблон имени устройства"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "В профилях развертывания Autopilot с гибридным присоединением к Microsoft Entra устройства именуются согласно параметрам, указанным в конфигурации присоединения к домену."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MyCompany-%RAND:4%",
+ "label": "Ввод имени",
+ "noDisallowedChars": "Имя должно включать только буквы, цифры, дефисы и макросы %SERIAL% или %RAND:x%",
+ "serialLength": "При использовании %SERIAL% допустимо не больше 7 символов",
+ "validateLessThan15Chars": "В имени должно быть не больше 15 символов",
+ "validateNoSpaces": "В именах компьютеров не должно быть пробелов",
+ "validateNotAllNumbers": "Имя должно также включать буквы и (или) дефисы",
+ "validateNotEmpty": "Имя не может быть пустым",
+ "validateOnlyOneMacro": "В имени может быть только один макрос %SERIAL% или %RAND:x%"
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Создайте уникальное имя для своих устройств. Имена должны быть длиной до 15 символов и могут включать буквы (a — z, A — Z), цифры (0–9) и дефисы. Имена только из цифр недопустимы, и они не могут включать пробелы. Используйте макрос %SERIAL%, чтобы добавить уникальный серийный номер оборудования, или макрос %RAND:x%, чтобы добавить случайную строку цифр, где x — количество этих цифр."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Включите функцию запуска при первом включении компьютера (OOBE) без проверки подлинности пользователя. Чтобы включить интерфейс OOBE, нужно нажать клавишу Windows пять раз. Устройство будет зарегистрировано, а также будут подготовлены все приложения и параметры в контексте локального компьютера. Приложения и параметры в контексте пользователя будут доставлены, когда пользователь выполнит вход в систему.",
+ "label": "Разрешить предварительно подготовленное развертывание"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Поток Autopilot гибридного присоединения к Microsoft Entra продолжит работу, даже если ему не удастся установить подключение к контроллеру домена во время запуска при первом включении компьютера.",
+ "label": "Пропустить проверку подключения AD"
+ },
+ "accountType": "Тип учетной записи пользователя",
+ "accountTypeInfo": "Укажите, являются ли пользователи администраторами или обычными пользователями на устройстве. Обратите внимание, что этот параметр не применяется к учетным записям глобального администратора или администратора организации. Эти учетные записи не могут быть обычными пользователями, так как они имеют доступ ко всем возможностям администрирования в Microsoft Entra ID.",
+ "configOOBEInfo": "
\r\nНастройка готового интерфейса для устройств Autopilot\r\n
",
+ "configureDevice": "Режим развертывания",
+ "configureDeviceHintForSurfaceHub2": "Autopilot поддерживает режим самостоятельного развертывания только для Surface Hub 2. Этот режим не связывает пользователя с зарегистрированным устройством, поэтому для него не требуются учетные данные пользователя.",
+ "configureDeviceHintForWindowsPC": "
\r\n Режим развертывания указывает, нужно ли пользователю вводить учетные данные, чтобы подготовить устройство.\r\n
\r\n
\r\n
\r\n Под управлением пользователя: устройства связываются с пользователем, регистрирующим устройство. Для подготовки устройства требуются учетные данные.\r\n
\r\n
\r\n Самостоятельное развертывание (предварительная версия): устройства не связываются с регистрирующим пользователем, и учетные данные не требуются для подготовки устройства.\r\n
\r\n
",
+ "createSurfaceHub2Info": "Настройте параметры регистрации Autopilot для устройств Surface Hub 2. По умолчанию в Autopilot включен пропуск проверки подлинности пользователей при первом включении (OBEE). Дополнительные сведения о Windows Autopilot для Surface Hub 2.",
+ "createWindowsPCInfo": "\r\n
\r\nСледующие параметры автоматически включаются для устройств Autopilot в режиме самостоятельного развертывания.\r\n
\r\n
\r\n
\r\n Пропустить выбор рабочего или домашнего использования.\r\n
\r\n
\r\n Пропустить регистрацию OEM и настройку OneDrive.\r\n
\r\n
\r\n Пропустить проверку подлинности в OOBE.\r\n
\r\n
",
+ "endUserDevice": "Под управлением пользователя",
+ "hideEscapeLink": "Скрыть параметры изменения учетной записи",
+ "hideEscapeLinkInfo": "Функции смены учетной записи и перезапуска с новой отображаются соответственно при начальной настройке устройства на корпоративной странице входа и на странице ошибки домена. Чтобы скрыть эти функции, настройте корпоративную фирменную символику в Microsoft Entra ID (требуется Windows 10 не ниже версии 1809 или Windows 11).",
+ "info": "Параметры профиля AutoPilot позволяют задать готовую конфигурацию, которую пользователи получат при первом запуске Windows. ",
+ "language": "Язык (регион)",
+ "languageInfo": "Укажите язык и регион, которые будут использоваться.",
+ "licenseAgreement": "Условия лицензионного соглашения корпорации Майкрософт",
+ "licenseAgreementInfo": "Укажите, следует ли показывать условия лицензии пользователям.",
+ "plugAndForgetDevice": "Самостоятельное развертывание",
+ "privacySettingWarning": "Изменено значение по умолчанию для сбора диагностических данных на устройствах под управлением Windows 10 версии 1903 и более поздних версий или Windows 11. ",
+ "privacySettings": "Настройки приватности",
+ "privacySettingsInfo": "Укажите, следует ли показывать пользователям параметры конфиденциальности.",
+ "showCortanaConfigurationPage": "Настройка Кортаны",
+ "showCortanaConfigurationPageInfo": "Вариант \"Показать\" включит введение в настройку Кортаны во время запуска.",
+ "skipEULAWarning": "Важные сведения о скрытии условий лицензии",
+ "skipKeyboardSelection": "Автоматически настроить клавиатуру",
+ "skipKeyboardSelectionInfo": "Если значение равно True, пропускать страницу выбора клавиатуры, когда задан параметр \"Язык\".",
+ "subtitle": "Профили AutoPilot",
+ "title": "Готовый интерфейс (OOBE)",
+ "useOSDefaultLanguage": "Значение ОС по умолчанию",
+ "userSelect": "Выбор пользователя"
},
+ "Sync": {
+ "lastRequestedLabel": "Последний запрос синхронизации",
+ "lastSuccessfulLabel": "Последняя успешная синхронизация",
+ "syncInProgress": "Выполняется синхронизация. Вернитесь чуть позже.",
+ "syncInitiated": "Запущена синхронизация параметров AutoPilot.",
+ "syncSettingsTitle": "Синхронизация параметров AutoPilot"
+ },
+ "Title": {
+ "devices": "Устройства Windows AutoPilot"
+ },
+ "Tooltips": {
+ "addressableUserName": "Имя пользователя в приветствии, которое отображается во время настройки устройства.",
+ "azureADDevice": "Перейдите к сведениям о связанном устройстве. \"Н/Д\" означает, что связанное устройство отсутствует.",
+ "batch": "Строковый атрибут, позволяющий идентифицировать группу устройств. Поле \"Тег группы\" в Intune сопоставляется с атрибутом OrderID на устройствах Microsoft Entra ID.",
+ "dateAssigned": "Временная метка назначения профиля устройству.",
+ "deviceAccountPwd": "Пароль учетной записи для устройств Surface Hub. Если он указан, также введите учетную запись устройства и понятное имя.",
+ "deviceAccountUpn": "Адрес электронной почты учетной записи для устройств Surface Hub. Если он указан, также введите пароль учетной записи устройства и понятное имя.",
+ "deviceDisplayName": "Задайте уникальное имя для устройства. Это имя будет игнорироваться в развертываниях с гибридным присоединением к Microsoft Entra, где по-прежнему используется имя устройства из профиля присоединения к домену.",
+ "deviceFriendlyName": "Понятное имя для устройств Surface Hub. Если оно указано, также введите учетную запись устройства и пароль учетной записи устройства.",
+ "deviceName": "Имя, отображаемое при попытке пользователя обнаружить устройство и подключиться к нему.",
+ "deviceUseType": " Устройство будет настроено в соответствии с вашим выбором. Вы всегда можете изменить параметры позже.\r\n
\r\n
Для собраний и презентаций Windows Hello не включен, и данные удаляются после каждого сеанса.\r\n
\r\n
Для совместной работы команды Windows Hello включен, и профили сохраняются для быстрого входа.
\r\n
",
+ "enrollmentState": "Указывает, зарегистрировано ли устройство.",
+ "intuneDevice": "Перейдите к сведениям о связанном устройстве. \"Н/Д\" означает, что связанное устройство отсутствует.",
+ "lastContacted": "Временная метка последнего обращения к устройству.",
+ "make": "Изготовитель выбранного устройства.",
+ "model": "Модель выбранного устройства",
+ "profile": "Имя профиля, назначенного устройству.",
+ "profileStatus": "Указывает, назначен ли профиль устройству.",
+ "purchaseOrderId": "Идентификатор заказа на покупку",
+ "resourceAccount": "Удостоверение устройства или имя субъекта-пользователя (UPN).",
+ "serialNumber": "Серийный номер выбранного устройства.",
+ "userPrincipalName": "Пользователь, который должен выполнить проверку подлинности при настройке устройства."
+ },
+ "allDevices": "Все устройства",
+ "allDevicesAlreadyAssignedError": "Профиль Autopilot уже назначен всем устройствам.",
+ "assignFailedDescription": "Не удалось изменить назначения для {0}.",
+ "assignFailedTitle": "Не удалось изменить назначения профилей AutoPilot.",
+ "assignSuccessDescription": "Назначения для {0} успешно изменены.",
+ "assignSuccessTitle": "Назначения профиля AutoPilot изменены.",
+ "assignSufaceHub2ProfileNextStep": "Следующие шаги для этого развертывания",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Назначьте этот профиль по крайней мере одной группе устройств.",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Назначьте учетную запись ресурса каждому устройству Surface Hub, на которое вы разворачиваете этот профиль.",
+ "assignedDevicesCount": "Назначенные устройства",
+ "assignedDevicesResourceAccountDescription": "
Для развертывания этого профиля на устройстве необходимо назначить устройству учетную запись ресурса. Выберите одно устройство, чтобы назначить существующую учетную запись ресурса или создать новую. Подробнее об учетных записях ресурсов
",
+ "assignedDevicesResourceAccountStatusBarMessage": "В этой таблице перечислены только устройства Surface Hub 2, которым был назначен этот профиль.",
+ "assigningDescription": "Изменяются назначения для {0}.",
+ "assigningTitle": "Изменяются назначения профилей AutoPilot.",
+ "autoremediationContext": "Обнаружено изменение оборудования на этом устройстве. Мы пытаемся автоматически зарегистрировать новое оборудование. Вам не нужно ничего делать сейчас; состояние будет обновлено при следующей проверке с результатом. Дополнительные сведения о сбросе профиля.",
+ "autoremediationTitle": "В устройстве {0} есть ожидающее исправление",
+ "cannotDeleteMessage": "Этот профиль назначен группам. Отмените назначение всех групп в этом профиле, прежде чем удалить его.",
+ "cannotDeleteTitle": "Невозможно удалить {0}",
+ "createdDateTime": "Создано",
+ "deleteMessage": "Если удалить этот профиль AutoPilot, для всех устройств, которым он назначен, будет отображаться \"Не назначено\".",
+ "deleteMessageWithPolicySet": "Профиль {0} включен как минимум в один набор политик. Если вы удалите {0}, вы больше не сможете назначать его через эти наборы.",
+ "deleteTitle": "Вы действительно хотите удалить этот профиль?",
+ "description": "Описание",
+ "deviceType": "Тип устройства",
+ "deviceUse": "Использование устройства",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot поддерживает присоединение к Microsoft Entra только для устройств Surface Hub 2. Укажите, как устройства присоединяются к Active Directory (AD) в вашей организации.\r\n
\r\n
\r\n
\r\n Присоединено к Microsoft Entra: только облако без локальной службы Windows Server Active Directory.\r\n
\r\n Укажите, как устройства присоединяются к Active Directory (AD) в вашей организации:\r\n
\r\n
\r\n
\r\n Присоединено к Microsoft Entra: только облако без локальной службы Windows Server Active Directory\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Произошла ошибка при извлечении числа назначенных устройств.",
+ "getAssignmentsError": "Произошла ошибка при извлечении назначений профиля AutoPilot.",
+ "harvestDeviceId": "Преобразовать все целевые устройства в Autopilot",
+ "harvestDeviceIdDescription": "По умолчанию этот профиль можно применить только к устройствам Autopilot, синхронизированным в службе Autopilot.",
+ "harvestDeviceIdInfo": "\r\n Выберите \"Да\", чтобы зарегистрировать все целевые устройства в Autopilot, если они еще не зарегистрированы. Назначенный сценарий Autopilot будет выполнен для них в следующий раз при процедуре первого включения компьютера (OOBE) с Windows.\r\n \r\n Обратите внимание, что для некоторых сценариев Autopilot требуются определенные минимальные версии сборок Windows. Проверьте наличие на устройстве требуемой минимальной версии сборки для нужного сценария.\r\n \r\n При удалении этого профиля связанные устройства не будут удалены из Autopilot. Для удаления устройства из Autopilot воспользуйтесь представлением \"Устройства Windows Autopilot\".\r\n ",
+ "harvestDeviceIdWarning": "После преобразования устройства Autopilot можно восстановить, только удалив их из списка устройств Autopilot.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Профили развертывания Windows AutoPilot позволяют настроить конфигурацию запуска при первом включении для ваших устройств.",
+ "invalidProfileNameMessage": "Символ \"{0}\" не допускается",
+ "joinTypeLabel": "Присоединиться к Microsoft Entra ID как",
+ "lastModifiedDateTime": "Последнее изменение:",
+ "manualRemediationContext": "Обнаружено изменение оборудования на этом устройстве. Устройство не получит автоматически профиль Autopilot при сбросе без повторной регистрации устройства. Дополнительные сведения о сбросе профиля.",
+ "manualRemediationTitle": "Устройство {0} требует вашего внимания",
+ "name": "Имя",
+ "noAutopilotProfile": "Нет профилей AutoPilot",
+ "notEnoughPermissionAssignedError": "У вас нет необходимых разрешений для назначения этого профиля некоторым из выбранных групп. Обратитесь к администратору.",
+ "profile": "профиль",
+ "resourceAccountStatusBarMessage": "Учетная запись ресурса необходима для каждого устройства Surface Hub 2, на котором развертывается этот профиль. Щелкните для получения дополнительных сведений.",
+ "selectServices": "Выберите службу каталогов, к которой будут присоединены устройства",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Режим развертывания",
+ "windowsPCCommandMenu": "Компьютер с Windows",
+ "directoryServiceLabel": "Присоединиться к Microsoft Entra ID как"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Управляемые устройства",
+ "devicesWithoutEnrollment": "Управляемые приложения"
+ },
+ "AppProtection": {
+ "allAppTypes": "Предназначены для всех типов приложений",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Приложения в рабочем профиле Android",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Приложения на выделенных устройствах Android Enterprise с общим режимом Microsoft Entra",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Приложения на устройствах Android с открытым кодом, связанные с пользователями",
+ "appsOnAndroidOpenSourceProjectUserless": "Приложения на устройствах Android с открытым кодом, не связанные с пользователями",
+ "appsOnIntuneManagedDevices": "Приложения на управляемых устройствах Intune",
+ "appsOnUnmanagedDevices": "Приложения на неуправляемых устройствах",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "MAC-адрес",
+ "notAvailable": "Недоступно",
+ "windows10PlatformLabel": "Windows 10 и более поздних версий",
+ "withEnrollment": "С регистрацией",
+ "withoutEnrollment": "Без регистрации"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Настольный клиент Project Online",
+ "visioProRetail": "Visio Online Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Не удалось удалить {0}",
+ "failureCa": "Не удалось удалить {0}, так как на него ссылаются политики центра сертификации",
+ "modifying": "Выполняется удаление {0}",
+ "success": "{0} удалено"
+ },
+ "Notify": {
+ "failure": "Не удалось обновить {0}",
+ "modifying": "Изменение: {0}.",
+ "success": "Изменено: {0}."
+ },
+ "menuLabel": "Контекст проверки подлинности"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Дополнительные сведения о требованиях к методам проверки подлинности, которым должны удовлетворять поставщики федерации.",
+ "certificate": "Проверка подлинности на основе сертификата",
+ "infoBubble": "Укажите нужный способ проверки подлинности, который должен предоставлять поставщик федерации, например ADFS.",
+ "multifactor": "Многофакторная проверка подлинности",
+ "require": "Требовать федеративный метод проверки подлинности (предварительная версия)",
+ "whatIfFormat": "{0} — {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Политика постоянного сеанса браузера работает правильно только при выборе варианта \"Все облачные приложения\". Обновите конфигурацию облачных приложений."
+ },
+ "Option": {
+ "always": "Всегда постоянный",
+ "help": "Постоянный сеанс в браузере означает, что пользователям не требуется снова выполнять вход после закрытия и повторного открытия окна браузера. \n
\n
Этот параметр работает правильно при выборе варианта \"Все облачные приложения\".
\n
Он не влияет на время жизни маркеров или настройку периодичности входа.
\n
Этот параметр приводит к переопределению политики \"Показать возможность не выходить из системы\" в фирменном оформлении компании.
\n
\"Запретить постоянный\" переопределяет любые утверждения постоянного единого входа, переданные из федеративных служб проверки подлинности.
\n
\"Запретить постоянный\" блокирует единый вход на мобильных устройствах в приложениях и между приложениями и мобильным браузером пользователя.
\n",
+ "label": "Сохраняемый сеанс браузера",
+ "never": "Запретить постоянный"
+ },
+ "Warning": {
+ "allApps": "Постоянный сеанс браузера работает правильно только при выборе варианта \"Все облачные приложения\". Измените конфигурацию облачных приложений. Щелкните здесь для получения дополнительных сведений."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Часы или дни",
+ "value": "Периодичность"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} дн.",
+ "singular": "1 день"
+ },
+ "Hour": {
+ "plural": "{0} ч",
+ "singular": "1 час"
+ },
+ "daysOption": "Дни",
+ "everytime": "Каждый раз",
+ "help": "Период времени, по истечении которого пользователю будет предложено повторить вход при попытке доступа к ресурсу. Значение по умолчанию — скользящий интервал 90 дней, т. е. пользователю будет предложено повторно пройти проверку подлинности при первой попытке доступа к ресурсу после периода отсутствия активности в течение не менее 90 дней.",
+ "hoursOption": "Часы",
+ "label": "Частота входа",
+ "placeholder": "Выбрать единицы отображения"
+ }
+ },
+ "mainOption": "Изменить время существования сеанса",
+ "mainOptionHelp": "Настройте частоту получения запросов пользователями и сохранение сеанса браузера. Приложения, которые не поддерживают современные протоколы проверки подлинности, могут не учитывать эти политики. В этом случае обратитесь к разработчику приложения."
+ },
+ "SingleSelectorActive": {
+ "failed": "Не удалось загрузить эти данные.",
+ "reattempt": "Загрузка данных. Повторная попытка: {0} из {1}."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Выбор ролей каталога"
+ },
+ "Excluded": {
+ "gridAria": "Список исключенных пользователей"
+ },
+ "Included": {
+ "gridAria": "Список включенных пользователей"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Роли каталога\" включают как минимум одну настраиваемую роль.",
+ "customRoleSelected": "Выбрана как минимум одна настраиваемая роль.",
+ "failed": "Необходимо настроить \"{0}\"",
+ "roles": "Выберите по меньшей мере одну роль",
+ "usersGroups": "Выберите по меньшей мере одного пользователя или одну группу"
+ },
+ "learnMore": "Управляйте доступом в зависимости от того, к кому будет применяться политика, например к пользователям и группам, удостоверениям рабочей нагрузки, ролям каталогов или внешним гостям."
+ },
+ "advancedTabText": "Дополнительно",
+ "allCloudAppsErrorBox": "Если выбрано предоставление разрешения \"Требовать изменения пароля\", необходимо выбрать \"Все облачные приложения\".",
+ "allCloudAppsReauth": "Если выбран элемент управления сеансом \"Частота входа (каждый раз)\" и условие \"Риск входа\", необходимо выбрать \"Все облачные приложения\"",
+ "allCloudOrSpecificApps": "Для элемента управления сеансом \"Частота входа (каждый раз)\" требуется выбрать \"Все облачные приложения\" или специально поддерживаемые приложения",
+ "allDayCheckboxLabel": "Весь день",
+ "allDevicePlatforms": "Любое устройство",
+ "allGuestUserInfoContent": "Включает гостей Microsoft Entra B2B, но не включает гостей SharePoint B2B",
+ "allGuestUserLabel": "Все гости и внешние пользователи",
+ "allRiskLevelsOption": "Все уровни рисков",
+ "allTrustedLocationLabel": "Все надежные расположения",
+ "allUserGroupSetSelectorLabel": "Все выбранные пользователи и группы",
+ "allUsersReauth": "Для элемента управления сеансом \"Частота входа (каждый раз)\" требуется выбрать \"Все пользователи\"",
+ "allUsersString": "Все пользователи",
+ "and": "{0} И {1} ",
+ "andWithGrouping": "({0}) и {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Любое приложение облака",
+ "appContextOptionInfoContent": "Тег запрошенной проверки подлинности",
+ "appContextOptionLabel": "Запрошенный тег проверки подлинности (предварительная версия)",
+ "appContextUriPlaceholder": "Пример: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Ограничения, применяемые приложением, могут требовать дополнительной настройки администратором в случае облачных приложений. Ограничения будут действовать только для новых сеансов.",
+ "appNotSetSeletorLabel": "Выбрано 0 облачных приложений",
+ "appReauthNotSupported": "Это приложение не поддерживает элемент управления сеансом \"Частота входа (каждый раз)\".",
+ "applyConditionClientAppInfoBalloonContent": "Настроить применение политики к определенным клиентским приложениям",
+ "applyConditionDevicePlatformInfoBalloonContent": "Настроить применение политики к определенным платформам устройств",
+ "applyConditionDeviceStateInfoBalloonContent": "Настроить применение политики к определенным состояниям устройств",
+ "applyConditionLocationInfoBalloonContent": "Настроить применение политики к надежным и ненадежным расположениям",
+ "applyConditionSigninRiskInfoBalloonContent": "Настроить применение политики к выбранным уровням риска для входа",
+ "applyConditionUserRiskInfoBalloonContent": "Настройте применение политики для выбранных уровней пользовательского риска",
+ "applyConditonLabel": "Настроить",
+ "ariaLabelPolicyDisabled": "Политика отключена",
+ "ariaLabelPolicyEnabled": "Политика включена",
+ "ariaLabelPolicyReportOnly": "Политика находится в режиме \"Только отчет\"",
+ "blockAccess": "Блокировка доступа",
+ "builtInDirectoryRoleLabel": "Встроенные роли каталога",
+ "casCustomControlInfo": "Необходимо настроить пользовательские политики на портале Cloud App Security. Этот элемент управления сразу же работает для популярных приложений, и его можно подключить к любому приложению. Щелкните здесь, чтобы получить дополнительные сведения о каждом из этих сценариев.",
+ "casInfoBubble": "Этот элемент управления можно использовать в разных облачных приложениях.",
+ "casPreconfiguredControlInfo": "Этот элемент управления сразу же работает для популярных приложений, и его можно подключить к любому приложению. Щелкните здесь, чтобы получить дополнительные сведения о каждом из этих сценариев.",
+ "cert64DownloadCol": "Скачать сертификат Base64",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Скачать сертификат",
+ "certDurationCol": "Срок действия",
+ "certDurationStartCol": "Действителен с",
+ "certName": "VpnCert",
+ "certainApps": "Параметр \"Частота попыток входа: каждый раз\" используется лишь определенными приложениями, если не выбраны параметры \"Требовать многофакторную проверку подлинности\" и \"Требовать смену пароля\"",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Выбор приложений",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Выбранные приложения",
+ "chooseApplicationsEmpty": "Нет приложений",
+ "chooseApplicationsNone": "Нет",
+ "chooseApplicationsNoneFound": "Не удалось найти \"{0}\". Попробуйте использовать другое имя или идентификатор.",
+ "chooseApplicationsPlural": "{0} и еще {1}",
+ "chooseApplicationsReAuthEverytimeInfo": "Ищете приложение? Некоторые приложения нельзя использовать с элементом управления сеанса \"Каждый раз требовать повторной проверки подлинности\"",
+ "chooseApplicationsRemove": "Удалить",
+ "chooseApplicationsReturnedPlural": "Найдено приложений: {0}.",
+ "chooseApplicationsReturnedSingular": "Найдено одно приложение.",
+ "chooseApplicationsSearchBalloon": "Поиск приложения по имени или идентификатору.",
+ "chooseApplicationsSearchHint": "Поиск приложений...",
+ "chooseApplicationsSearchLabel": "Приложения",
+ "chooseApplicationsSearching": "Идет поиск...",
+ "chooseApplicationsSelect": "Выбрать",
+ "chooseApplicationsSelected": "Выбрано",
+ "chooseApplicationsSingular": "{0} и еще 1",
+ "chooseApplicationsTooMany": "Результатов больше, чем может быть отображено. Выполните фильтрацию при помощи поля поиска.",
+ "chooseLocationCorpnetItem": "Корпоративная сеть",
+ "chooseLocationSelectedLocationsLabel": "Выбранные расположения",
+ "chooseLocationTrustedIpsItem": "Доверенные IP-адреса многофакторной проверки подлинности",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Выбор расположений",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Выбранные расположения",
+ "chooseLocationsEmpty": "Расположений нет",
+ "chooseLocationsExcludedSelectorTitle": "Выбрать",
+ "chooseLocationsIncludedSelectorTitle": "Выбрать",
+ "chooseLocationsNone": "Нет",
+ "chooseLocationsNoneFound": "Не удалось найти \"{0}\". Попробуйте использовать другое имя или идентификатор.",
+ "chooseLocationsPlural": "{0} и еще {1}",
+ "chooseLocationsRemove": "Удалить",
+ "chooseLocationsReturnedPlural": "Найдено расположений: {0}",
+ "chooseLocationsReturnedSingular": "Найдено одно расположение.",
+ "chooseLocationsSearchBalloon": "Поиск расположения по имени.",
+ "chooseLocationsSearchHint": "Поиск расположений...",
+ "chooseLocationsSearchLabel": "Расположение",
+ "chooseLocationsSearching": "Идет поиск...",
+ "chooseLocationsSelect": "Выбрать",
+ "chooseLocationsSelected": "Выбрано",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Выбрать",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Выбрать",
+ "chooseLocationsSingular": "{0} и еще 1",
+ "chooseLocationsTooMany": "Результатов больше, чем может быть отображено. Выполните фильтрацию при помощи поля поиска.",
+ "claimProviderAddCommandText": "Новый настраиваемый элемент управления",
+ "claimProviderAddNewBladeTitle": "Новый настраиваемый элемент управления",
+ "claimProviderDeleteCommand": "Удалить",
+ "claimProviderDeleteDescription": "Вы действительно хотите удалить сеть \"{0}\"? Это действие невозможно отменить.",
+ "claimProviderDeleteTitle": "Вы уверены?",
+ "claimProviderEditInfoText": "Введите JSON для настраиваемых элементов управления, предоставленных поставщиками утверждений.",
+ "claimProviderNotificationCreateDescription": "Создается настраиваемый элемент управления \"{0}\"",
+ "claimProviderNotificationCreateFailedDescription": "Произошел сбой при создании настраиваемого элемента управления \"{0}\". Повторите попытку позже.",
+ "claimProviderNotificationCreateFailedTitle": "Не удалось создать настраиваемый элемент управления",
+ "claimProviderNotificationCreateSuccessDescription": "Создан настраиваемый элемент управления \"{0}\"",
+ "claimProviderNotificationCreateSuccessTitle": "Создана сеть \"{0}\"",
+ "claimProviderNotificationCreateTitle": "Идет создание сети \"{0}\"",
+ "claimProviderNotificationDeleteDescription": "Удаляется настраиваемый элемент управления \"{0}\"",
+ "claimProviderNotificationDeleteFailedDescription": "Произошел сбой при удалении настраиваемого элемента управления \"{0}\". Повторите попытку позже.",
+ "claimProviderNotificationDeleteFailedTitle": "Не удалось удалить настраиваемый элемент управления",
+ "claimProviderNotificationDeleteSuccessDescription": "Удален настраиваемый элемент управления \"{0}\"",
+ "claimProviderNotificationDeleteSuccessTitle": "Сеть \"{0}\" удалена.",
+ "claimProviderNotificationDeleteTitle": "Идет удаление \"{0}\"",
+ "claimProviderNotificationUpdateDescription": "Обновляется настраиваемый элемент управления \"{0}\"",
+ "claimProviderNotificationUpdateFailedDescription": "Произошел сбой при обновлении настраиваемого элемента управления \"{0}\". Повторите попытку позже.",
+ "claimProviderNotificationUpdateFailedTitle": "Не удалось обновить настраиваемый элемент управления",
+ "claimProviderNotificationUpdateSuccessDescription": "Обновлен настраиваемый элемент управления \"{0}\"",
+ "claimProviderNotificationUpdateSuccessTitle": "Сеть \"{0}\" изменена.",
+ "claimProviderNotificationUpdateTitle": "Идет обновление сети \"{0}\".",
+ "claimProviderValidationAppIdInvalid": "Значение \"AppId\" недопустимо. Проверьте и повторите попытку.",
+ "claimProviderValidationClientIdMissing": "В данных отсутствует значение \"ClientId\". Проверьте и повторите попытку.",
+ "claimProviderValidationControlClaimsRequestedMissing": "В \"Control\" отсутствует значение \"ClaimsRequested\". Проверьте и повторите попытку.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "В элементе \"ClaimsRequested\" отсутствует значение \"Type\". Проверьте и повторите попытку.",
+ "claimProviderValidationControlIdAlreadyExists": "Значение \"Id\" для \"Control\" уже существует. Проверьте и повторите попытку.",
+ "claimProviderValidationControlIdMissing": "В \"Control\" отсутствует значение \"Id\". Проверьте и повторите попытку.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "Значение \"Id\" для \"Control\" невозможно удалить, так как на него ссылается существующая политика. Сначала удалите его из политики.",
+ "claimProviderValidationControlIdTooManyControls": "Свойство \"Control\" содержит слишком много элементов управления. Проверьте его и повторите попытку.",
+ "claimProviderValidationControlIdValueReserved": "Значение \"Id\" для \"Control\" является зарезервированным ключевым словом; используйте другой идентификатор.",
+ "claimProviderValidationControlNameAlreadyExists": "Значение \"Name\" для \"Control\" уже существует. Проверьте и повторите попытку.",
+ "claimProviderValidationControlNameMissing": "В \"Control\" отсутствует значение \"Name\". Проверьте и повторите попытку.",
+ "claimProviderValidationControlsMissing": "В данных отсутствует значение \"Controls\". Проверьте и повторите попытку.",
+ "claimProviderValidationDiscoveryUrlMissing": "В данных отсутствует значение \"DiscoveryUrl\". Проверьте и повторите попытку.",
+ "claimProviderValidationInvalid": "Предоставленные данные недопустимы. Проверьте и повторите попытку.",
+ "claimProviderValidationInvalidJsonDefinition": "Не удалось сохранить настраиваемый элемент управления. Проверьте текст JSON и повторите попытку.",
+ "claimProviderValidationNameAlreadyExists": "Значение \"Name\" уже существует. Проверьте и повторите попытку.",
+ "claimProviderValidationNameMissing": "В данных отсутствует значение \"Name\". Проверьте и повторите попытку.",
+ "claimProviderValidationUnknown": "Произошла неизвестная ошибка при проверке предоставленных данных. Проверьте и повторите попытку.",
+ "claimProvidersNone": "Нет настраиваемых элементов управления",
+ "claimProvidersSearchPlaceholder": "Поиск элементов управления.",
+ "classicPoilcyFilterTitle": "Показать",
+ "classicPolicyAllPlatforms": "Все платформы",
+ "classicPolicyClientAppBrowserAndNative": "Браузер, мобильные приложения и клиенты для настольных ПК",
+ "classicPolicyCloudAppTitle": "Облачное приложение",
+ "classicPolicyControlAllow": "Разрешить",
+ "classicPolicyControlBlock": "Заблокировать",
+ "classicPolicyControlBlockWhenNotAtWork": "Блокировать доступ, если не на работе",
+ "classicPolicyControlRequireCompliantDevice": "Требовать соответствующее устройство",
+ "classicPolicyControlRequireDomainJoinedDevice": "Требуется устройство, присоединенное к домену",
+ "classicPolicyControlRequireMfa": "Требовать многофакторную проверку подлинности",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Требовать многофакторную проверку подлинности вне работы",
+ "classicPolicyDeleteCommand": "Удалить",
+ "classicPolicyDeleteFailTitle": "Не удалось удалить классическую политику",
+ "classicPolicyDeleteInProgressTitle": "Удаление классической политики",
+ "classicPolicyDeleteSuccessTitle": "Классическая политика удалена",
+ "classicPolicyDetailBladeTitle": "Подробности",
+ "classicPolicyDisableCommand": "Отключить",
+ "classicPolicyDisableConfirmation": "Действительно отключить \"{0}\"? Это действие невозможно отменить.",
+ "classicPolicyDisableFailDescription": "Не удалось отключить политику \"{0}\"",
+ "classicPolicyDisableFailTitle": "Не удалось отключить классическую политику",
+ "classicPolicyDisableInProgressDescription": "Отключение политики \"{0}\"",
+ "classicPolicyDisableInProgressTitle": "Отключение классической политики",
+ "classicPolicyDisableSuccessDescription": "Политика \"{0}\" отключена",
+ "classicPolicyDisableSuccessTitle": "Классическая политика отключена",
+ "classicPolicyEasSupportedPlatforms": "Поддерживаемые платформы Exchange ActiveSync",
+ "classicPolicyEasUnsupportedPlatforms": "Неподдерживаемые платформы Exchange ActiveSync",
+ "classicPolicyExcludedPlatformsTitle": "Исключенные платформы устройств",
+ "classicPolicyFilterAll": "Все политики",
+ "classicPolicyFilterDisabled": "Отключенные политики",
+ "classicPolicyFilterEnabled": "Включенные политики",
+ "classicPolicyIncludeExcludeMembersDescription": "Исключая группы, вы можете выполнить поэтапный перенос политик.",
+ "classicPolicyIncludeExcludeMembersTitle": "Включение и исключение групп",
+ "classicPolicyIncludedPlatformsTitle": "Включенные платформы устройств",
+ "classicPolicyManualMigrationMessage": "Эту политику необходимо перенести вручную.",
+ "classicPolicyMigrateCommand": "Перенос",
+ "classicPolicyMigrateConfirmation": "Действительно выполнить миграцию \"{0}\"? Эту политику можно перенести только один раз.",
+ "classicPolicyMigrateFailDescription": "Не удалось перенести \"{0}\"",
+ "classicPolicyMigrateFailTitle": "Не удалось перенести классическую политику",
+ "classicPolicyMigrateInProgressDescription": "Миграция \"{0}\"...",
+ "classicPolicyMigrateInProgressTitle": "Перенос классической политики",
+ "classicPolicyMigrateRecommendText": "Рекомендация: перейдите на новые политики портала Azure.",
+ "classicPolicyMigrateSuccessTitle": "Классическая политика перенесена",
+ "classicPolicyMigratedSuccessDescription": "Теперь этой классической политикой можно управлять в разделе \"Политики\".",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "Эта классическая политика переносится в виде нескольких новых политик ({0}). Новыми политиками можно управлять в разделе \"Политики\".",
+ "classicPolicyNoEditPermissionMsg": "У вас нет разрешения на изменение этой политики. Только глобальные администраторы и администраторы безопасности могут изменять политику. Щелкните здесь, чтобы получить дополнительные сведения.",
+ "classicPolicySaveFailDescription": "Не удалось сохранить политику \"{0}\"",
+ "classicPolicySaveFailTitle": "Не удалось сохранить классическую политику",
+ "classicPolicySaveInProgressDescription": "Сохранение политики \"{0}\"",
+ "classicPolicySaveInProgressTitle": "Сохранение классической политики",
+ "classicPolicySaveSuccessDescription": "Политика \"{0}\" сохранена",
+ "classicPolicySaveSuccessTitle": "Классическая политика сохранена",
+ "clientAppBladeLegacyInfoBanner": "Устаревший способ проверки подлинности сейчас не поддерживается.",
+ "clientAppBladeLegacyUpsellBanner": "Блокировка неподдерживаемых клиентских приложений (предварительная версия)",
+ "clientAppBladeTitle": "Клиентские приложения",
+ "clientAppDescription": "Выберите клиентские приложения, на которые будет распространяться эта политика.",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync сейчас не поддерживает все остальные условия.",
+ "clientAppLearnMore": "Управляйте доступом пользователей к определенным клиентским приложениям, не использующим современную проверку подлинности.",
+ "clientAppLegacyHeader": "Клиенты с устаревшими версиями проверки подлинности",
+ "clientAppMobileDesktop": "Мобильные приложения и настольные клиенты",
+ "clientAppModernHeader": "Клиенты с современной проверкой подлинности",
+ "clientAppOnlySupportedPlatforms": "Применить политику только к поддерживаемым платформам",
+ "clientAppSelectSpecificClientApps": "Выбрать клиентские приложения",
+ "clientAppWebBrowser": "Браузер",
+ "clientAppsSelectedLabel": "Включено: {0}",
+ "clientTypeBrowser": "Браузер",
+ "clientTypeEas": "Клиенты Exchange ActiveSync",
+ "clientTypeEasInfo": "Клиенты Exchange ActiveSync, использующие только устаревшую проверку подлинности.",
+ "clientTypeModernAuth": "Клиенты с современной проверкой подлинности",
+ "clientTypeOtherClients": "Другие клиенты",
+ "clientTypeOtherClientsInfo": "Сюда входят старые офисные клиенты и другие протоколы электронной почты (POP, IMAP, SMTP и т. д.). [Дополнительные сведения][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "Из каталога удалены облачные приложения ({0}), настроенные в этой политике, но это не затронет другие ее приложения. Удаление из политики произойдет автоматически при следующем изменении ее раздела приложений.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Все приложения Майкрософт",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Разрешить облачные, классические и мобильные приложения Майкрософт (предварительная версия)",
+ "cloudappsSelectionBladeAllCloudapps": "Все облачные приложения",
+ "cloudappsSelectionBladeExcludeDescription": "Выбор облачных приложений, которые будут исключены из политики.",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Выбрать исключенные облачные приложения",
+ "cloudappsSelectionBladeIncludeDescription": "Выбрать облачные приложения, к которым будет применяться эта политика",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Выбрать",
+ "cloudappsSelectionBladeSelectedCloudapps": "Выбрать приложения",
+ "cloudappsSelectorInfoBallonText": "Службы, которые пользователь использует для работы. Например, Salesforce.",
+ "cloudappsSelectorPluralExcluded": "Исключено приложений: {0}",
+ "cloudappsSelectorPluralIncluded": "Включено приложений: {0}",
+ "cloudappsSelectorSingularExcluded": "Исключено 1 приложение",
+ "cloudappsSelectorSingularIncluded": "Включено 1 приложение",
+ "cloudappsSelectorUserPlural": "Приложений: {0}",
+ "cloudappsSelectorUserSingular": "1 приложение",
+ "conditionLabelMulti": "Выбрано условий: {0}",
+ "conditionLabelOne": "1 условие выбрано",
+ "conditionalAccessBladeTitle": "Условный доступ",
+ "conditionsNotSelectedLabel": "Не настроено",
+ "conditionsReqMfaReauthSet": "Некоторые параметры недоступны, поскольку сейчас выбран параметры \"Требовать многофакторную проверку подлинности\" и элемент управления сеансом \"Частота попыток входа: каждый раз\"",
+ "conditionsReqPwSet": "Некоторые варианты недоступны, так как сейчас выбрано предоставление разрешения \"Требовать изменения пароля\".",
+ "configureCasText": "Настроить Cloud App Security",
+ "configureCustomControlsText": "Настроить пользовательскую политику",
+ "controlLabelMulti": "Выбрано элементов управления: {0}",
+ "controlLabelOne": "1 элемент управления выбран",
+ "controlValidatorText": "Выберите по меньшей мере один элемент управления",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Дополнительные сведения о требовании совместимых устройств.",
+ "controlsDeviceComplianceInfoBubble": "Устройство должно соответствовать политике Intune. Если устройство не соответствует ей, пользователя попросят привести его в соответствие с требованиями.",
+ "controlsDomainJoinedAriaLabel": "Подробнее о требовании устройства с гибридным присоединением к Microsoft Entra.",
+ "controlsDomainJoinedInfoBubble": "Устройства должны иметь гибридное присоединение к Microsoft Entra.",
+ "controlsMamAriaLabel": "Дополнительные сведения об обязательном использовании утвержденных клиентских приложений.",
+ "controlsMamInfoBubble": "Устройство должно использовать следующие утвержденные клиентские приложения.",
+ "controlsMfaInfoBubble": "Пользователь должен выполнить дополнительные требования безопасности, такие как телефонный звонок, SMS.",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Дополнительные сведения о требовании приложений, защищенных политикой.",
+ "controlsRequireCompliantAppInfoBubble": "На устройстве следует использовать приложения, защищенные политикой.",
+ "controlsRequirePasswordResetAriaLabel": "Дополнительные сведения о необходимости смены пароля.",
+ "controlsRequirePasswordResetInfoBubble": "Требовать изменить пароль, чтобы снизить риск пользователя. Для этого также требуется многофакторная проверка подлинности. Невозможно использовать другие элементы управления.",
+ "countriesRadiobuttonInfoBalloonContent": "Страна или регион, откуда выполняется вход, определяются по IP-адресу пользователя.",
+ "createNewVpnCert": "Новый сертификат",
+ "createdTimeLabel": "Время создания",
+ "customRoleLabel": "Настраиваемые роли (не поддерживаются)",
+ "dateRangeTypeLabel": "Диапазон дат",
+ "daysOfWeekPlaceholderText": "Фильтр по дням недели",
+ "daysOfWeekTypeLabel": "Дни недели",
+ "deletePolicyNoLicenseText": "Теперь вы можете удалить эту политику. После удаления вы не сможете создать ее повторно, если у вас нет необходимых лицензий.",
+ "descriptionContentForControlsAndOr": "Для нескольких элементов управления",
+ "devicePlatform": "Платформа устройства",
+ "devicePlatformConditionHelpDescription": "Применение политики к выбранным платформам устройств.\n[Дополнительные сведения][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "Включено: {0}",
+ "devicePlatformIncludeExclude": "Исключены: {0} и {1}",
+ "devicePlatformNoSelectionError": "Для выбора платформ устройств требуется выбрать один вложенный элемент.",
+ "devicePlatformsNone": "Нет",
+ "deviceSelectionBladeExcludeDescription": "Выбор платформ, которые будут исключены из политики.",
+ "deviceSelectionBladeIncludeDescription": "Выбрать платформы устройств, включаемые в эту политику",
+ "deviceStateAll": "Все состояния устройств",
+ "deviceStateCompliant": "Устройство, отмеченное как соответствующее требованиям",
+ "deviceStateCompliantInfoContent": "Устройства, совместимые с Intune, будут исключены из оценки этой политики, поэтому, например, если политика блокирует доступ, она заблокирует все устройства, кроме совместимых с Intune.",
+ "deviceStateConditionConfigureInfoContent": "Настроить политику на основе состояния устройства",
+ "deviceStateConditionSelectorInfoContent": "Обозначает состояние устройства, с которого входит пользователь: с гибридным присоединением к Microsoft Entra или помечено как соответствующее требованиям.\n Этот параметр больше не рекомендуется к использованию. Используйте вместо него \"{1}\".",
+ "deviceStateConditionSelectorLabel": "Состояние устройства (не рекомендуется)",
+ "deviceStateDomainJoined": "Устройство с гибридным присоединением к Microsoft Entra",
+ "deviceStateDomainJoinedInfoContent": "Устройства с гибридным присоединением к Microsoft Entra не будут проверяться на соответствие этой политике. Например, если политика блокирует доступ, она будет делать это для всех устройств, кроме устройств с гибридным присоединением к Microsoft Entra.",
+ "deviceStateDomainJoinedInfoLinkText": "Дополнительные сведения.",
+ "deviceStateExcludeDescription": "Выберите условие состояния устройства, используемое для исключения устройств из политики.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} и исключить {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} и исключить {1}, {2}",
+ "directoryRoleInfoContent": "Назначьте политику для встроенных ролей каталога.",
+ "directoryRolesLabel": "Роли каталога",
+ "discardbutton": "Отменить",
+ "downloadDefaultFileName": "Диапазоны IP-адресов",
+ "downloadExampleFileName": "Пример",
+ "downloadExampleHeader": "Это пример файла, в котором демонстрируются типы данных, которые могут быть приняты. Строки, начинающиеся с символа #, будут пропущены.",
+ "duplicate": "Дублировать",
+ "duplicatePolicyName": "КОПИРОВАТЬ {0}",
+ "endDatePickerLabel": "Элементы",
+ "endTimePickerLabel": "Время окончания",
+ "enterCountryText": "IP-адрес и страна или регион проверяются в паре. Выберите страну или регион.",
+ "enterIpText": "IP-адрес и страна или регион проверяются в паре. Введите IP-адрес.",
+ "enterUserText": "Нет выбранных пользователей. Выберите пользователя.",
+ "evaluationResult": "Результат вычисления",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Только Exchange ActiveSync с поддерживаемыми платформами",
+ "excludeAllTrustedLocationSelectorText": "все надежные расположения",
+ "featureRequiresP2": "Для этой функции требуется лицензия Microsoft Entra ID P2.",
+ "friday": "Пятница",
+ "grantControls": "Предоставить управление",
+ "gridNetworkTrusted": "Надежный",
+ "gridPolicyCreatedDateTime": "Дата создания",
+ "gridPolicyEnabled": "Включено",
+ "gridPolicyModifiedDateTime": "Дата изменения",
+ "gridPolicyName": "Имя политики",
+ "gridPolicyState": "Состояние",
+ "groupSelectionBladeExcludeDescription": "Выбор групп, которые будут исключены из политики",
+ "groupSelectionBladeExcludedSelectorTitle": "Выбор исключенных групп",
+ "groupSelectionBladeSelect": "Выбор групп",
+ "groupSelectorInfoBallonText": "Группы в каталоге, к которому применяется политика. Например, \"пилотная группа\"",
+ "groupsSelectionBladeTitle": "Группы",
+ "helpCommonScenariosText": "Хотите узнать о распространенных ситуациях?",
+ "helpCondition1": "Когда любой пользователь вне сети компании",
+ "helpCondition2": "Когда пользователи в группе \"Менеджеры\" входят",
+ "helpConditionsTitle": "Условия",
+ "helpControl1": "При входе им требуется пройти многофакторную проверку подлинности",
+ "helpControl2": "Они должны использовать устройство, присоединенное к домену и соответствующее требованиям Intune.",
+ "helpControlsTitle": "Элементы управления",
+ "helpIntroText": "Условный доступ позволяет требовать соблюдение определенных условий в отношении доступа, когда удовлетворяется определенный критерий. Приведем несколько примеров.",
+ "helpIntroTitle": "Что представляет собой условный доступ?",
+ "helpLearnMoreText": "Хотите узнать больше об условном доступе?",
+ "helpStartStep1": "Создайте первую политику, щелкнув \"+ Новая политика\"",
+ "helpStartStep2": "Укажите условия и механизмы контроля для политики",
+ "helpStartStep3": "Когда все сделаете, не забудьте включить политику и создать",
+ "helpStartTitle": "Начало работы",
+ "highRisk": "Высокая",
+ "includeAndExcludeAppsTextFormat": "Включить: {0}. Исключить: {1}.",
+ "includeAppsTextFormat": "Включить: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Неизвестные области — это IP-адреса, которые невозможно сопоставить со страной или регионом.",
+ "includeUnknownAreasCheckboxLabel": "Включить неизвестные области",
+ "infoCommandLabel": "Сведения",
+ "invalidCertDuration": "Недопустимый срок действия сертификата",
+ "invalidIpAddress": "Необходимо указать допустимый IP-адрес.",
+ "invalidReAuthSignInRiskOptionSelected": "Элемент управления сеансом \"Частота входа (каждый раз)\" не позволяет выбрать \"Без риска\" в элементе управления условиями \"Риск входа\".",
+ "invalidUriErrorMsg": "Введите допустимый URI, например \"uri:contoso.com:acr\" ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Загрузить все",
+ "loading": "Идет загрузка...",
+ "locationConfigureNamedLocationsText": "Настроить все надежные расположения",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Слишком длинное имя расположения. Максимум — 256 символов",
+ "locationSelectionBladeExcludeDescription": "Выбор расположений, которые будут исключены из политики.",
+ "locationSelectionBladeIncludeDescription": "Выберите расположения, включаемые в эту политику",
+ "locationsAllLocationsLabel": "Любое местонахождение",
+ "locationsAllNamedLocationsLabel": "Все надежные IP-адреса",
+ "locationsAllPrivateLinksLabel": "Все частные каналы в моем клиенте",
+ "locationsIncludeExcludeLabel": "{0} и исключить все надежные IP-адреса",
+ "locationsSelectedPrivateLinksLabel": "Выбранные приватные каналы",
+ "lowRisk": "Низкий",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "Для управления политиками условного доступа вашей организации требуется Microsoft Entra ID P1 или P2.",
+ "manageSecurityDefaultsAriaLabel": "Управление параметрами безопасности по умолчанию.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Вход из надежного расположения снижает риск входа пользователя. Отмечайте это расположение как надежное, только если указанные диапазоны IP-адресов в организации хорошо известны и получены из достоверных источников.",
+ "markAsTrustedCheckboxLabel": "Отметить как надежное расположение",
+ "mediumRisk": "Средняя",
+ "memberSelectionCommandRemove": "Удалить",
+ "menuItemClaimProviderControls": "Настраиваемые элементы управления (предварительная версия)",
+ "menuItemClassicPolicies": "Классические политики",
+ "menuItemInsightsAndReporting": "Аналитические данные и отчеты",
+ "menuItemManage": "Управление",
+ "menuItemNamedLocationsPreview": "Именованные расположения (предварительная версия)",
+ "menuItemNamedNetworks": "Именованные расположения",
+ "menuItemPolicies": "Политики",
+ "menuItemTermsOfUse": "Условия использования",
+ "modifiedTimeLabel": "Время изменения",
+ "monday": "Понедельник",
+ "nameLabel": "Имя",
+ "namedLocationCountryInfoBanner": "Со странами и регионами сопоставляются только адреса IPv4. Адреса IPv6 включаются в неизвестные страны и регионы.",
+ "namedLocationTypeCountry": "Страны/регионы",
+ "namedLocationTypeLabel": "Задайте расположение, используя:",
+ "namedLocationUpsellBanner": "Использовать это представление не рекомендуется. Перейти к новому улучшенному представлению \"Именованные расположения\".",
+ "namedLocationsHelpDescription": "Именованные расположения используются отчетами о безопасности Microsoft Entra ID для сокращения числа ложноположительных результатов, а также политиками условного доступа Microsoft Entra.\n[Подробнее][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Добавьте новый диапазон IP-адресов (например: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "Нужно выбрать по меньшей мере одну страну или регион",
+ "namedNetworkDeleteCommand": "Удалить",
+ "namedNetworkDeleteDescription": "Вы действительно хотите удалить сеть \"{0}\"? Это действие невозможно отменить.",
+ "namedNetworkDeleteTitle": "Вы уверены?",
+ "namedNetworkDownloadIpRange": "Скачать",
+ "namedNetworkInvalidRange": "Значение должно быть допустимым диапазоном IP-адресов.",
+ "namedNetworkIpRangeNeeded": "Требуется по меньшей мере один допустимый диапазон IP-адресов.",
+ "namedNetworkIpRangesDescriptionContent": "Настройка диапазонов IP-адресов организации",
+ "namedNetworkIpRangesTab": "Диапазоны IP-адресов",
+ "namedNetworkListAdd": "Создать расположение",
+ "namedNetworkListConfigureTrustedIps": "Настройка доверенных IP-адресов многофакторной проверки подлинности",
+ "namedNetworkNameDescription": "Пример: \"офис Redmond\"",
+ "namedNetworkNameInvalid": "Указанное имя недопустимо.",
+ "namedNetworkNameRequired": "Необходимо указать имя для этого расположения.",
+ "namedNetworkNoIpRanges": "Диапазоны IP-адресов отсутствуют",
+ "namedNetworkNotificationCreateDescription": "Создание расположения с именем \"{0}\"",
+ "namedNetworkNotificationCreateFailedDescription": "Сбой при создании расположения \"{0}\". Повторите попытку позже.",
+ "namedNetworkNotificationCreateFailedTitle": "Не удалось создать расположение",
+ "namedNetworkNotificationCreateSuccessDescription": "Создано расположение с именем \"{0}\"",
+ "namedNetworkNotificationCreateSuccessTitle": "Создана сеть \"{0}\"",
+ "namedNetworkNotificationCreateTitle": "Идет создание сети \"{0}\"",
+ "namedNetworkNotificationDeleteDescription": "Удаление расположения с именем \"{0}\"",
+ "namedNetworkNotificationDeleteFailedDescription": "Сбой при удалении расположения \"{0}\". Повторите попытку позже.",
+ "namedNetworkNotificationDeleteFailedTitle": "Не удалось удалить расположение",
+ "namedNetworkNotificationDeleteSuccessDescription": "Расположение с именем \"{0}\" удалено",
+ "namedNetworkNotificationDeleteSuccessTitle": "Сеть \"{0}\" удалена.",
+ "namedNetworkNotificationDeleteTitle": "Идет удаление \"{0}\"",
+ "namedNetworkNotificationUpdateDescription": "Изменение расположения с именем \"{0}\"",
+ "namedNetworkNotificationUpdateFailedDescription": "Сбой при изменении расположения \"{0}\". Повторите попытку позже.",
+ "namedNetworkNotificationUpdateFailedTitle": "Не удалось изменить расположение",
+ "namedNetworkNotificationUpdateSuccessDescription": "Расположение с именем \"{0}\" изменено",
+ "namedNetworkNotificationUpdateSuccessTitle": "Сеть \"{0}\" изменена.",
+ "namedNetworkNotificationUpdateTitle": "Идет обновление сети \"{0}\".",
+ "namedNetworkSearchPlaceholder": "Поиск расположений.",
+ "namedNetworkUploadFailedDescription": "Произошла ошибка при анализе предоставленного файла. Отправьте обычный текстовый файл со строками в формате CIDR.",
+ "namedNetworkUploadFailedTitle": "Не удалось проанализировать \"{0}\".",
+ "namedNetworkUploadInProgressDescription": "Выполняется попытка проанализировать допустимые значения CIDR из \"{0}\".",
+ "namedNetworkUploadInProgressTitle": "Анализируется \"{0}\"",
+ "namedNetworkUploadInvalidDescription": "\"{0}\" слишком велик или имеет недопустимый формат.",
+ "namedNetworkUploadInvalidTitle": "Недопустимый файл \"{0}\"",
+ "namedNetworkUploadIpRange": "Отправка",
+ "namedNetworkUploadSuccessDescription": "Проанализировано строк: {0}. В неправильном формате: {1}. Пропущено: {2}.",
+ "namedNetworkUploadSuccessTitle": "Завершен анализ \"{0}\"",
+ "namedNetworksAdd": "Новое именованное расположение",
+ "namedNetworksConditionHelpDescription": "Управление доступом пользователей на основе физического расположения.\n[Дополнительные сведения][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "Исключены: {0} и {1}",
+ "namedNetworksHelpDescription": "Именованные расположения используются отчетами о безопасности Microsoft Entra ID для сокращения числа ложноположительных результатов, а также политиками условного доступа Microsoft Entra.\n[Подробнее][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "Включено: {0}",
+ "namedNetworksNone": "Нет именованных расположений",
+ "namedNetworksTitle": "Настройка расположений",
+ "namednetworkExceedingSizeErrorBladeTitle": "Сведения об ошибке",
+ "namednetworkExceedingSizeErrorDetailText": "Для получения дополнительных сведений щелкните здесь.",
+ "namednetworkExceedingSizeErrorMessage": "Максимальный допустимый размер хранилища для именованных расположений превышен. Попробуйте сократить список. Для получения дополнительных сведений щелкните здесь.",
+ "needMfaSecondary": "Если выбран параметр \"Частота входа: каждый раз\" с параметром \"Только дополнительные методы проверки подлинности\", необходимо выбрать параметр \"Требовать многофакторную проверку подлинности\"",
+ "needMfaSpecificApps": "Для элемента управления сеансом \"Частота попыток входа: каждый раз\" требуется элемент управления разрешением \"Требовать многофакторную проверку подлинности\", когда выбраны поддерживаемые приложения.",
+ "newCertName": "Новый сертификат",
+ "noAttributePermissionsError": "Недостаточно прав для создания или изменения политики. Чтобы добавить или изменить динамические фильтры, требуется роль читателя определений атрибутов.",
+ "noPolicyRowMessage": "Политик нет",
+ "noSPSelected": "Не выбран ни один субъект-служба",
+ "noUpdatePermissionMessage": "У вас нет разрешений для изменения этих параметров. Запросите доступ у глобального администратора.",
+ "noUserSelected": "Пользователи не выбраны",
+ "noneRisk": "Без риска",
+ "office365Description": "Эти приложения включают Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer и другие.",
+ "office365InfoBox": "По крайней мере одно из выбранных приложений входит в состав Office 365. Рекомендуется настроить эту политику для приложения Office 365.",
+ "oneUserSelected": "Выбран один пользователь",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Только глобальные администраторы могут сохранить эту политику.",
+ "or": "{0} ИЛИ {1} ",
+ "pickerDoneCommand": "Готово",
+ "policiesBladeAdPremiumUpsellBannerText": "Microsoft Entra ID Premium позволяет вам создавать собственные политики под конкретные условия: облачные приложения, риски входа и платформы устройств",
+ "policiesBladeTitle": "Политики",
+ "policiesBladeTitleWithAppName": "Политик: {0}",
+ "policiesDisabledBannerText": "Создание и изменение политик запрещено для приложений, с которыми связан атрибут входа.",
+ "policiesHitMaxLimitStatusBarMessage": "Достигнуто максимальное число политик для этого клиента. Перед созданием дополнительных политик удалите существующие.",
+ "policyAssignmentsSection": "Назначения",
+ "policyBlockAllInfoBox": "Настроенная политика заблокирует всех пользователей, поэтому она не поддерживается. Проверьте назначения и средства контроля. Исключите текущего пользователя {0}, если вы хотите сохранить эту политику.",
+ "policyCloudAppsDisplayTextAllApp": "Все приложения",
+ "policyCloudAppsLabel": "Облачные приложения",
+ "policyConditionClientAppDescription": "Программное обеспечение, которое пользователь использует для обращения к облачному приложению. Например, браузер.",
+ "policyConditionClientAppV2Description": "Программное обеспечение, которое пользователь использует для обращения к облачному приложению. Например, браузер.",
+ "policyConditionDevicePlatform": "Платформы устройств",
+ "policyConditionDevicePlatformDescription": "Платформа, с которой пользователь выполняет вход. Например, iOS.",
+ "policyConditionLocation": "Расположение",
+ "policyConditionLocationDescription": "Расположение, определенное при помощи диапазона IP-адресов, из которого пользователь выполняет вход.",
+ "policyConditionLocationPreview": "Расположения (предварительная версия)",
+ "policyConditionSigninRisk": "Риск при входе",
+ "policyConditionSigninRiskDescription": "Вероятность входа по чужим учетным данным. Уровень риска может быть высоким, средним или низким. Требуется лицензия Microsoft Entra ID P2.",
+ "policyConditionUserRisk": "Риск пользователя",
+ "policyConditionUserRiskDescription": "Настройте уровни риска пользователей, необходимые для применения политики.",
+ "policyConditioniClientApp": "Клиентские приложения",
+ "policyControlAllowAccessDisplayedName": "Разрешить доступ",
+ "policyControlAuthenticationStrengthDisplayedName": "Требуемая надежность проверки подлинности (предварительная версия)",
+ "policyControlBladeTitle": "Предоставление",
+ "policyControlBlockAccessDisplayedName": "Блокировка доступа",
+ "policyControlCompliantDeviceDisplayedName": "Требовать, чтобы устройство было отмечено как соответствующее",
+ "policyControlContentDescription": "Управляйте применением доступа для его блокировки или предоставления.",
+ "policyControlInfoBallonText": "Заблокируйте доступ или укажите дополнительные требования, которые необходимо выполнить для разрешения доступа.",
+ "policyControlMfaChallengeDisplayedName": "Требовать многофакторную проверку подлинности",
+ "policyControlRequireCompliantAppDisplayedName": "Требование политики защиты приложений",
+ "policyControlRequireDomainJoinedDisplayedName": "Потребовать устройство с гибридным присоединением к Microsoft Entra",
+ "policyControlRequireMamDisplayedName": "Требовать утвержденное клиентское приложение",
+ "policyControlRequiredPasswordChangeDisplayedName": "Требовать изменения пароля",
+ "policyControlSelectAuthStrength": "Требуемая надежность проверки подлинности",
+ "policyControlsNoControlsSelected": "Выбрано 0 механизмов управления",
+ "policyControlsSection": "Элементы управления доступом",
+ "policyCreatBladeTitle": "Создать",
+ "policyCreateButton": "Создать",
+ "policyCreateFailedMessage": "Ошибка. {0}",
+ "policyCreateFailedTitle": "Не удалось создать политику \"{0}\"",
+ "policyCreateInProgressTitle": "Идет создание сети \"{0}\"",
+ "policyCreateSuccessMessage": "Политика \"{0}\" создана. Она будет включена через несколько минут, если параметр \"Включить политику\" имеет значение \"Включен\".",
+ "policyCreateSuccessTitle": "Политика \"{0}\" создана",
+ "policyDeleteConfirmation": "Вы действительно хотите удалить сеть \"{0}\"? Это действие невозможно отменить.",
+ "policyDeleteFailTitle": "Не удалось удалить \"{0}\"",
+ "policyDeleteInProgressTitle": "Идет удаление \"{0}\"",
+ "policyDeleteSuccessTitle": "\"{0}\" успешно удалено",
+ "policyEnforceLabel": "Включить политику",
+ "policyErrorCannotSetSigninRisk": "У вас нет разрешений на сохранение политики с условием риска для входа.",
+ "policyErrorNoPermission": "У вас нет разрешения на сохранение политики. Обратитесь к глобальному администратору.",
+ "policyErrorUnknown": "Что-то пошло не так, повторите попытку позже.",
+ "policyFallbackWarningMessage": "Не удалось создать или обновить \"{0}\" с помощью MS Graph, что привело к откату к AD Graph. Изучите следующий сценарий, так как наиболее вероятно возникновение ошибки при вызове конечной точки политики для MS Graph с несовместимым условием.",
+ "policyFallbackWarningTitle": "Создание или обновление \"{0}\" выполнено частично успешно",
+ "policyNameCannotBeEmpty": "Имя политики не может быть пустым.",
+ "policyNameDevice": "Политика устройства",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Политика управления мобильными приложениями",
+ "policyNameMfaLocation": "Политика многофакторной проверки подлинности и расположения",
+ "policyNamePlaceholderText": "Пример: \"политика в отношении соответствия приложений на устройствах\"",
+ "policyNameTooLongError": "Слишком длинное имя политики. Максимум — 256 символов",
+ "policyOff": "Выкл.",
+ "policyOn": "Вкл.",
+ "policyReportOnly": "Только отчет",
+ "policyReviewSection": "Просмотр",
+ "policySaveButton": "Сохранить",
+ "policyStatusIconDescription": "Политика включена",
+ "policyStatusIconEnabled": "Значок состояния \"Включено\"",
+ "policyTemplateName1": "Использовать ограничения, применяемые приложением, для доступа к {0} в браузере",
+ "policyTemplateName2": "Разрешить доступ для {0} только на управляемых устройствах",
+ "policyTemplateName3": "Политика, перенесенная из параметров Непрерывной оценки доступа",
+ "policyTriggerRiskSpecific": "Выберите уровень риска",
+ "policyTriggersInfoBalloonText": "Условия, при которых будет применена политика. Например, \"расположение\".",
+ "policyTriggersNoConditionsSelected": "Выбрано 0 условий",
+ "policyTriggersSelectorLabel": "Условия",
+ "policyUpdateFailedMessage": "Ошибка. {0}",
+ "policyUpdateFailedTitle": "Не удалось обновить {0}",
+ "policyUpdateInProgressTitle": "Идет обновление {0}",
+ "policyUpdateSuccessMessage": "Политика {0} обновлена. Она будет включена через несколько минут, если параметр \"Включить политику\" имеет значение \"Включен\".",
+ "policyUpdateSuccessTitle": "{0} успешно обновлено",
+ "primaryCol": "Основной",
+ "privateLinkLabel": "Приватный канал Microsoft Entra ID",
+ "reportOnlyInfoBox": "Режим \"Только отчет\": при входе выполняется оценка соответствия политикам и запись в журнал, но пользователи никак не затрагиваются.",
+ "requireAllControlsText": "Требовать все выбранные элементы управления",
+ "requireCompliantDevice": "Требовать соответствующее устройство",
+ "requireDomainJoined": "Требуется устройство, присоединенное к домену",
+ "requireGrantReauth": "Для элемента управления сеансом \"Частота попыток входа: каждый раз\" требуется элемент управления разрешениями \"Требовать многофакторную проверку подлинности\" или \"Требовать смену пароля\", если выбран параметр \"Все облачные приложения\"",
+ "requireMFA": "Требовать многофакторную проверку подлинности",
+ "requireMfaReauth": "Для элемента управления сеансом \"Частота попыток входа: каждый раз\" требуется элемент управления разрешением \"Требовать многофакторную проверку подлинности\" для параметра \"Риск при входе\"",
+ "requireOneControlText": "Требовать один из выбранных элементов управления",
+ "requirePasswordChangeReauth": "Элементу управления сеансом \"Частота входа (каждый раз)\" требуется управление предоставлением разрешения \"Требовать смену пароля\" для параметра \"Риск пользователя\"",
+ "requireRiskReauth": "Элементу управления сеансом \"Частота входа (каждый раз)\" требуется элемент управления сеансом \"Риск пользователя\" или \"Риск при входе\", если выбран параметр \"Все облачные приложения\".",
+ "requireRiskReauthRiskNotEnabled": "Элемент управления сеансом \"Частота входа (каждый раз)\" недоступен, если выбран параметр \"Все облачные приложения\".",
+ "requireRiskReauthSignInOnly": "Элементу управления сеансом \"Частота входа (каждый раз)\" требуется элемент управления сеансом \"Риск при входе\", если выбран параметр \"Все облачные приложения\".",
+ "requireRiskReauthUserOnly": "Элементу управления сеансом \"Частота входа (каждый раз)\" требуется элемент управления сеансом \"Риск пользователя\", если выбран параметр \"Все облачные приложения\".",
+ "resetFilters": "Сброс фильтров",
+ "sPRequired": "Требуется субъект-служба",
+ "sPSelectorInfoBalloon": "Пользователь или субъект-служба, которые нужно проверить",
+ "saturday": "Суббота",
+ "searchTextTooLongError": "Слишком длинный поисковый запрос. Максимальное число символов — 256.",
+ "securityDefaultsPolicyName": "Параметры безопасности по умолчанию",
+ "securityDefaultsTextMessage": "Для включения политики условного доступа необходимо отключить параметры безопасности по умолчанию.",
+ "securityDefaultsUpdateInProgressText": "Выполняется обновление параметров безопасности по умолчанию. Подождите несколько секунд и повторите попытку.",
+ "securityDefaultsWarningMessage": "Похоже, вы собираетесь управлять конфигурациями безопасности организации. Отлично! Перед включением политики условного доступа необходимо {0}отключить параметры безопасности по умолчанию{1}.",
+ "selectDevicePlatforms": "Выбрать платформы устройств",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Выберите расположения",
+ "selectedSP": "Выбранный субъект-служба",
+ "servicePrincipalBladeExcludedSelectorTitle": "Выберите исключенные субъекты-службы",
+ "servicePrincipalBladeIncludedSelectorTitle": "Выберите субъекты-службы",
+ "servicePrincipalDataGridAria": "Список доступных субъектов-служб",
+ "servicePrincipalDropDownLabel": "К чему применяется эта политика?",
+ "servicePrincipalInfoBox": "Некоторые условия недоступны из-за выбора \"{0}\" в назначении политики",
+ "servicePrincipalRadioAll": "Все субъекты-службы, находящиеся в собственности",
+ "servicePrincipalRadioSelect": "Выберите субъекты-службы",
+ "servicePrincipalSelectionsAria": "Сетка выбранных субъектов-служб",
+ "servicePrincipalSelectorAria": "Список выбранных субъектов-служб",
+ "servicePrincipalSelectorMultiple": "Выбрано субъектов-служб: {0}",
+ "servicePrincipalSelectorSingle": "Выбран один субъект-служба",
+ "servicePrincipalSpecificExc": "Исключены конкретные субъекты-службы",
+ "servicePrincipalSpecificInc": "Включены конкретные субъекты-службы",
+ "servicePrincipals": "Субъекты-службы",
+ "sessionControlBladeTitle": "Сеанс",
+ "sessionControlDescriptionContent": "Управляйте доступом пользователей на основе элементов управления сеансами для ограничения возможностей взаимодействия с определенными облачными приложениями.",
+ "sessionControlDisableInfo": "Этот элемент управления работает только с поддерживаемыми приложениями. Сейчас Office 365, Exchange Online и SharePoint Online — единственные облачные приложения, которые поддерживают ограничения приложений. Щелкните здесь, чтобы получить дополнительные сведения.",
+ "sessionControlInfoBallonText": "Элементы управления сеанса предоставляют ограниченную функциональность в облачных приложениях.",
+ "sessionControls": "Элементы управления сеансом",
+ "sessionControlsAppEnforcedLabel": "Использовать ограничения, применяемые приложениями",
+ "sessionControlsCasLabel": "Использовать управление условным доступом к приложениям",
+ "sessionControlsSecureSignInLabel": "Требовать привязку токена",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "Включено: {0}",
+ "signinRiskReauth": "Если выбрано разрешение \"Требовать многофакторную проверку подлинности\" и элемент управления сеансом \"Частота попыток входа: каждый раз\", необходимо выбрать условие \"Риск при входе\"",
+ "signinRiskTriggerDescriptionContent": "Выберите уровень риска при входе",
+ "singleTenantServicePrincipalInfoBallonText": "Политика применяется только к субъектам-службам одного клиента, принадлежащим вашей организации. Щелкните здесь, чтобы получить дополнительные сведения ",
+ "specificSigninRiskLevelsOption": "Выберите конкретные уровни риска для входа",
+ "specificUsersExcluded": "отдельные пользователи исключены",
+ "specificUsersIncluded": "Отдельные пользователи включены",
+ "specificUsersIncludedAndExcluded": "Определенные пользователи, исключенные и включенные",
+ "startDatePickerLabel": "Запускается",
+ "startFreeTrial": "Начните пользоваться бесплатной пробной версией",
+ "startTimePickerLabel": "Время начала",
+ "sunday": "Воскресенье",
+ "testButton": "Параметр \"What If\"",
+ "thumbprintCol": "Отпечаток",
+ "thursday": "Четверг",
+ "timeConditionAllTimesLabel": "В любое время",
+ "timeConditionIntroText": "Настройте время, когда будет применяться политика",
+ "timeConditionSelectorInfoBallonContent": "Время входа пользователя в систему. Например, \"Среда с 09:00 до 17:00 по тихоокеанскому стандартному времени\"",
+ "timeConditionSelectorLabel": "Время (предварительная версия)",
+ "timeConditionSpecificLabel": "Определенное время",
+ "timeSelectorAllTimesText": "В любое время",
+ "timeSelectorSpecificTimesText": "Определенное время настроено",
+ "timeZoneDropdownInfoBalloonContent": "Выберите часовой пояс, в котором указан диапазон времени. Эта политика применяется к пользователям во всех часовых поясах. Например, время \"Среда с 9:00 до 17:00\" выглядит как \"Среда с 10:00 до 18:00\" для пользователя в другом часовом поясе.",
+ "timeZoneDropdownLabel": "Часовой пояс",
+ "timeZoneDropdownPlaceholderText": "Выберите часовой пояс",
+ "tooManyPoliciesDescription": "Сейчас отображаются только первые 50 политик. Щелкните здесь, чтобы увидеть все политики.",
+ "tooManyPoliciesTitle": "Найдено больше 50 политик.",
+ "trustedLocationStatusIconDescription": "Это надежное расположение",
+ "trustedLocationStatusIconEnabled": "Значок состояния \"Надежное\"",
+ "tuesday": "Вторник",
+ "uploadInBadState": "Не удалось отправить указанный файл.",
+ "upsellAppsDescription": "Требовать многофакторную проверку подлинности для конфиденциальных приложений всегда или только при использовании вне сети организации.",
+ "upsellAppsTitle": "Защита приложений",
+ "upsellBannerText": "Получить бесплатную пробную версию уровня \"Премиум\" для использования этой возможности",
+ "upsellDataDescription": "Требовать, чтобы для получения доступа к ресурсам компании устройство было помечено как соответствующее требованиям или являлось устройством с гибридным присоединением к Microsoft Entra.",
+ "upsellDataTitle": "Защита данных",
+ "upsellDescription": "Условный доступ предоставляет механизмы управления и защиту, необходимые для обеспечения безопасности данных организации, а также позволяет пользователям наиболее эффективно работать с любого устройства. Например, вы можете разрешить доступ только при работе из локальной сети или запретить доступ устройствам, которые не соответствуют политикам.",
+ "upsellRiskDescription": "Требовать многофакторную проверку подлинности для событий риска, обнаруженных системой машинного обучения Майкрософт.",
+ "upsellRiskTitle": "Защита от рисков",
+ "upsellTitle": "Условный доступ",
+ "upsellWhyTitle": "Зачем нужно использовать условный доступ?",
+ "userAppNoneOption": "Нет",
+ "userNamePlaceholderText": "Введите имя пользователя",
+ "userNotSetSeletorLabel": "Выбрано 0 пользователей и групп",
+ "userOnlySelectionBladeExcludeDescription": "Выберите пользователей, которые будут исключены из политики",
+ "userOrGroupSelectionCountDiffBannerText": "{0}, настроенные в этой политике, были удалены из каталога, однако это не влияет на других пользователей и на другие группы в политике. При следующем обновлении политики удаленные пользователи и/или группы будут автоматически удалены.",
+ "userOrSPNotSetSelectorLabel": "Удостоверения пользователей или рабочих нагрузок не выбраны",
+ "userOrSPSelectionBladeTitle": "Удостоверения пользователей или рабочих нагрузок",
+ "userOrSPSelectorInfoBallonText": "Удостоверения в каталоге, к которому применяется политика, включая пользователей, группы и субъекты-службы",
+ "userRequired": "Требуется пользователь",
+ "userRiskErrorBox": "Если выбрано предоставления разрешения \"Требовать изменения пароля\", необходимо выбрать условие \"Пользовательский риск\".",
+ "userRiskReauth": "Если выбрано разрешение \"Требовать смену пароля\" и элемент управления сеансом \"Частота входа (каждый раз)\", необходимо выбрать условие \"Риск пользователя\", а не \"Риск входа\"",
+ "userSPRequired": "Требуется пользователь или субъект-служба",
+ "userSPSelectorTitle": "Удостоверение пользователя или рабочей нагрузки",
+ "userSelectionBladeAllUsersAndGroups": "Все пользователи и группы",
+ "userSelectionBladeExcludeDescription": "Выбор пользователей и групп, которые будут исключены из политики.",
+ "userSelectionBladeExcludeTabTitle": "Исключить",
+ "userSelectionBladeExcludedSelectorTitle": "Выберите пользователей и группы для исключения",
+ "userSelectionBladeIncludeDescription": "Выберите пользователей, к которым будет применяться эта политика",
+ "userSelectionBladeIncludeTabTitle": "Включение",
+ "userSelectionBladeIncludedSelectorTitle": "Выбрать",
+ "userSelectionBladeSelectUsers": "Выбрать пользователей",
+ "userSelectionBladeSelectedUsers": "Выбрать пользователей и группы",
+ "userSelectionBladeTitle": "Пользователи и группы",
+ "userSelectorBladeTitle": "Пользователи",
+ "userSelectorExcluded": "Исключено: {0}",
+ "userSelectorGroupPlural": "Групп: {0}",
+ "userSelectorGroupSingular": "1 группа",
+ "userSelectorIncluded": "Включено: {0}",
+ "userSelectorInfoBallonText": "Пользователи и группы в каталоге, к которому применяется политика. Например, \"пилотная группа\".",
+ "userSelectorSelected": "Выбрано: {0}.",
+ "userSelectorTitle": "Пользователь",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "Пользователи: {0}",
+ "userSelectorUserSingular": "1 пользователь",
+ "userSelectorWithExclusion": "{0} и {1}",
+ "usersGroupsLabel": "Пользователи и группы",
+ "viewApprovedAppsText": "Смотреть список утвержденных клиентских приложений",
+ "viewCompliantAppsText": "Смотреть список клиентских приложений, защищенных политикой",
+ "viewPolicyInformation": "Просмотреть информацию о политике",
+ "vpnBladeTitle": "Подключение VPN",
+ "vpnCertCreateFailedMessage": "Ошибка: {0}",
+ "vpnCertCreateFailedTitle": "Не удалось создать {0}.",
+ "vpnCertCreateInProgressTitle": "Создание {0}",
+ "vpnCertCreateSuccessMessage": "Сертификат {0} успешно создан.",
+ "vpnCertCreateSuccessTitle": "{0} создана.",
+ "vpnCertNoRowsMessage": "Сертификаты VPN не найдены",
+ "vpnCertUpdateFailedMessage": "Ошибка: {0}",
+ "vpnCertUpdateFailedTitle": "Не удалось обновить {0}",
+ "vpnCertUpdateInProgressTitle": "Идет обновление {0}",
+ "vpnCertUpdateSuccessMessage": "Сертификат {0} успешно обновлен.",
+ "vpnCertUpdateSuccessTitle": "{0} успешно обновлено",
+ "vpnFeatureInfo": "Чтобы получить дополнительные сведения о подключении VPN и условном доступе, щелкните здесь.",
+ "vpnFeatureWarning": "После создания на портале сертификата VPN Microsoft Entra ID начнет использовать его для выдачи краткосрочных сертификатов VPN-клиенту. Чтобы избежать проблем с проверкой учетных данных VPN-клиента, необходимо немедленно развернуть сертификат VPN на VPN-сервере.",
+ "vpnMenuText": "Подключение VPN",
+ "vpncertDropdownDefaultOption": "Длительность",
+ "vpncertDropdownInfoBalloonContent": "Выберите срок действия создаваемого сертификата",
+ "vpncertDropdownLabel": "Выбрать длительность",
+ "vpncertDropdownOneyearOption": "1 год",
+ "vpncertDropdownThreeyearOption": "3 года",
+ "vpncertDropdownTwoyearOption": "2 года",
+ "wednesday": "Среда",
+ "whatIfCountry": "Страна или регион",
+ "whatIfCountryInfo": "Страна или регион, из которой входит пользователь.",
+ "whatIfDevicePlatformInfo": "Платформа устройства, с которой пользователь входит в систему.",
+ "whatIfEnterIpAddress": "Введите IP-адрес (например: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "Указан недопустимый адрес IP.",
+ "whatIfIpAddress": "IP-адрес",
+ "whatIfIpAddressInfo": "IP-адрес, с которого пользователь входит в систему.",
+ "whatIfIpCountryInfoBoxText": "При указании IP-адреса или страны или региона оба поля являются обязательными и должны правильно сопоставляться.",
+ "whatIfSelectCountry": "Выберите страну или регион...",
+ "whatIfSelectDevicePlatform": "Выберите платформу устройства...",
+ "whatIfSelectPrivateLink": "Выберите приватный канал…",
+ "whatIfSelectSignInRisk": "Выберите риск входа…",
+ "whatIfSignInRisk": "Риск при входе",
+ "whatIfSignInRiskInfo": "Уровень риска, связанный со входом в систему",
+ "whatIfUnknownAreas": "Неизвестные области",
+ "windows365InfoBox": "Выбор Windows 365 повлияет на подключения к облачным компьютерам и узлам сеансов виртуальных рабочих столов Azure. Щелкните здесь для получения дополнительных сведений.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Удостоверения рабочей нагрузки (предварительная версия)",
+ "workloadIdentitiesLicenseText": "Для изменения этой политики требуется премиум-лицензия P1 или P2 удостоверений рабочей нагрузки.",
+ "workloadIdentity": "Удостоверение рабочей нагрузки"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Обзор"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Поиск по устройству, пользователю или версии исправления."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Не удалось загрузить профили обновления ПО iOS"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Профиль обновления iOS",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "профиль"
+ },
+ "listLoadError": "Невозможно загрузить профили обновления программного обеспечения iOS. Повторите попытку позже.",
+ "lowercase": "Политика обновления iOS",
+ "uppercase": "Политика обновления iOS"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Не удается подключиться к Apple, чтобы получить список доступных версий. Приносим свои извинения. Повторите попытку позже или продолжайте использовать последнюю версию.",
+ "latestUpdate": "Последнее обновление",
+ "noLongerSupported": "Выбранная версия больше не поддерживается",
+ "olderVersionSelected": "Поскольку вы выбрали более раннюю версию, убедитесь, что вы применяете политику ограничения устройств, которая откладывает видимость обновлений программного обеспечения, чтобы устройства не могли выполнить обновление до последней версии.",
+ "prefix": "Установить iOS/iPadOS",
+ "selectSupported": "Выберите версию обновления, поддерживаемую Apple",
+ "updateToInstall": "Обновление для установки"
+ },
+ "Schedule": {
+ "always": "Обновить при следующей синхронизации",
+ "duringTimeWindows": "Обновить по расписанию",
+ "header": "Если устройству назначена политика обновлений, по умолчанию Intune развертывает последние обновления при синхронизации устройства. Вы можете создать еженедельное расписание с настраиваемыми значениями времени начала и окончания. При установке обновлений не по расписанию Intune не будет развертывать обновления, пока время по расписанию не закончится.",
+ "infoBalloon": "Когда будут выполнены обновления. Для планирования обновлений в течение запланированного времени или за его рамками необходимо указать дополнительные сведения.",
+ "label": "Тип расписания",
+ "outsideActiveHours": "Обновлять вне периода активности (для устаревших версий)",
+ "outsideTimeWindows": "Обновить не по расписанию",
+ "timeWindow": "Период времени",
+ "timeZone": "Часовой пояс",
+ "title": "Параметры расписания политики обновления:",
+ "weekly": "Расписание по неделям",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "Версия iOS/iPadOS, которую необходимо установить на устройствах во время обновления.",
+ "label": "Выберите версию для установки"
+ },
+ "header": "Создайте профиль, чтобы автоматически устанавливать последние обновления iOS/iPadOS на назначенные устройства. Эти параметры определяют способ и время развертывания обновлений программного обеспечения. Профиль не запрещает пользователям обновлять ОС вручную, однако в соответствии с политикой ограничения конфигурации устройств выполнение обновлений может быть запрещено на срок до 90 дней. Обновления будут применяться только к контролируемым устройствам.",
+ "notAvailable": "Н/Д"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Отсутствуют политики обновления iOS для отображения",
+ "macOsUpdates": "Отсутствуют политики обновления программного обеспечения macOS для отображения",
+ "windowsUpdates": "Нет кругов обновления для Windows 10 и более поздних версий для отображения."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Имя устройства",
+ "deviceUpdateStatus": "Состояние обновления устройств",
+ "lastUpdated": "Последнее обновление",
+ "osVersion": "Версия ОС",
+ "userPrincipalName": "Имя пользователя"
+ },
+ "maximumOSVersionFilter": "Максимальная версия ОС",
+ "minimumOSVersionFilter": "Минимальная версия ОС",
+ "noData": "Нет данных для отображения.",
+ "searchBoxPlaceholder": "Искать по имени устройства, имени пользователя или версии ОС",
+ "title": "Сводка учетных записей для устройств с macOS"
+ },
+ "Category": {
+ "configurationDataFile": "Файл данных конфигурации",
+ "critical": "Критические",
+ "firmware": "Встроенное ПО",
+ "other": "Другой"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Последнее обновление",
+ "successfulUpdateCount": "Успешно развернутые обновления",
+ "totalUpdateCount": "Всего развернутых обновлений",
+ "updateCategory": "Категория обновлений",
+ "updateCategoryStatus": "Состояние категории обновлений"
+ },
+ "noData": "Нет данных для отображения."
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Не удалось загрузить профили обновления ПО macOS"
+ }
+ },
+ "State": {
+ "available": "Доступно",
+ "commandFailed": "Произошел сбой команды",
+ "downloadFailed": "Ошибка скачивания",
+ "downloadInsufficientNetwork": "Недостаточно сетевых ресурсов для скачивания",
+ "downloadInsufficientPower": "Недостаточно заряда аккумулятора для скачивания",
+ "downloadInsufficientSpace": "Недостаточно места для скачивания",
+ "downloaded": "Скачано",
+ "downloading": "Идет скачивание",
+ "idle": "Бездействие",
+ "installFailed": "Сбой установки",
+ "installInsufficientPower": "Недостаточно заряда аккумулятора для установки",
+ "installInsufficientSpace": "Недостаточно места для установки",
+ "installing": "Идет установка",
+ "scheduled": "Внесен в план",
+ "success": "Успех",
+ "unknown": "Неизвестно"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Последнее обновление",
+ "updateName": "Обновить имя",
+ "updateStatus": "Состояние обновления",
+ "version": "Версия"
+ },
+ "noData": "Нет данных для отображения.",
+ "searchBoxPlaceholder": "Искать по названию или версии обновления"
+ },
+ "SummaryBlade": {
+ "subtitle": "Профиль обновления macOS.",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Профиль"
+ },
+ "error": "Ошибка",
+ "errorOrErrors": "Ошибки",
+ "errors": "Ошибки",
+ "listLoadError": "Невозможно загрузить профили обновления программного обеспечения macOS. Повторите попытку позже.",
+ "lowercase": "политика обновления macOS",
+ "other": "Другой",
+ "subtitle": "Обновление программного обеспечения macOS",
+ "upToDate": "Актуальное состояние",
+ "uppercase": "Политика обновления macOS"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Повторите попытку позже",
+ "title": "Не удалось удалить {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Повторите попытку позже"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Повторите попытку позже",
+ "title": "Не удалось загрузить {0}"
+ },
+ "idWrongFormat": "Указанный идентификатор профиля имеет непредвиденный формат."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "Необходимо выбрать хотя бы один период времени.",
+ "tooMany": "Можно настроить не более 20 периодов времени."
+ }
+ },
+ "endDay": "День завершения",
+ "endTime": "Время окончания",
+ "startDay": "День начала",
+ "startTime": "Время начала",
+ "timeWindowError": "Выберите интервал времени, который длится не менее одного часа."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Не удалось загрузить профили кругов обновления для Windows 10 и более поздних версий."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Круг обновления для Windows 10 и более поздних версий",
+ "title": "Центр обновления Windows для бизнеса"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 и более поздних версий",
+ "title": "Круг обновления для Windows 10 и более поздних версий"
+ },
+ "listLoadError": "Невозможно загрузить профили кругов обновления для Windows 10. Повторите попытку позже",
+ "lowercase": "Круг обновления",
+ "uppercase": "Круг обновления"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Изменить настройки политики",
+ "updateRingSettings": "Изменить параметры круга"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Создание {0}",
+ "edit": "Изменить {0}"
+ }
+ },
+ "notScannedYet": "Еще не проверено",
+ "outOfDateIosDevices": "Устаревшие устройства с iOS"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge 77 и более поздние версии",
+ "storeApp": "Приложение Магазина",
+ "office365Suite": "Приложения Microsoft 365",
+ "microsoftDefenderATP": "Microsoft Defender для конечной точки",
+ "other": "Другие",
+ "webApplication": "Веб-приложение"
+ },
+ "Filters": {
+ "ruleSyntax": "Синтаксис правила",
+ "filters": "Фильтры"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Выберите сценарий обнаружения.",
+ "scriptFileLabel": "Выберите ваш сценарий обнаружения"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Если этот параметр включен, устройства должны соответствовать настраиваемым правилам, определенным в JSON-файле на основе настраиваемых данных, которые возвращаются сценарием обнаружения PowerShell.",
+ "label": "Решение \"Настраиваемое соответствие требованиям\" в настоящее время доступно в виде предварительной версии. Когда оно станет общедоступным, глобальный администратор или администратор выставления счетов сможет добавить его за дополнительную плату к вариантам лицензирования, включающим Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Сценарий",
+ "placeholder": "Щелкните, чтобы выбрать",
+ "searchboxPlaceholder": "Искать по имени сценария",
+ "title": "Выберите сценарий обнаружения"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Сводка правил настраиваемого соответствия"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Отправка и проверка файла JSON с параметрами настраиваемого соответствия",
+ "noFileSelectedError": "Выберите файл JSON.",
+ "parseFileSelectedError": "Недопустимый файл JSON."
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Настройте требования к ПИН-коду и учетным данным, которым должны следовать пользователи для доступа к приложениям в рабочем контексте."
+ },
+ "DataProtection": {
+ "infoText": "Эта группа включает элементы управления Защиты от потери данных (DLP), такие как ограничение на вырезание, копирование, вставку и сохранение. Эти параметры определяют, как пользователи взаимодействуют с данными в приложениях."
+ },
+ "DeviceTypes": {
+ "selectOne": "Выберите хотя бы один тип устройства."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Поддержка приложений на любых типах устройств"
+ },
+ "infoText": "Выберите способ применения этой политики к приложениям на различных устройствах. Затем добавьте хотя бы одно приложение.",
+ "selectOne": "Выберите по меньшей мере одно приложение, чтобы создать политику."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender для конечной точки",
+ "androidDeviceOwnerApplications": "Приложения",
+ "androidDeviceOwnerPolicyMessages": "Пользовательские справочные сведения",
+ "androidForWorkPassword": "Пароль устройства",
+ "appManagement": "Разрешить или блокировать приложения",
+ "applicationGuard": "Application Guard в Microsoft Defender",
+ "applicationRestrictions": "Ограниченные приложения",
+ "applicationVisibility": "Отображение или скрытие приложений",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, просмотр документов, игры",
+ "applicationsAndGoogle": "Магазин Google Play",
+ "appsAndExperience": "Приложения и интерфейс",
+ "associatedDomains": "Связанные домены",
+ "autonomousSingleAppMode": "Режим одного автономного приложения (ASAM)",
+ "azureOperationalInsights": "Оперативная аналитика Azure",
+ "bitLocker": "Шифрование Windows",
+ "bootOptions": "Параметры загрузки",
+ "browser": "Браузер",
+ "builtinApps": "Встроенные приложения",
+ "cameras": "Камеры",
+ "cellular": "Сотовая связь",
+ "cloudAndStorage": "Облако и хранилище",
+ "cloudPrint": "Облачный принтер",
+ "complianceEmailProfile": "Электронная почта",
+ "connectedDevices": "Подключенные устройства",
+ "connectivity": "Сотовая связь и взаимодействие",
+ "contentCaching": "Кэширование содержимого",
+ "controlPanelAndSettings": "Панель управления и параметры",
+ "credentialGuard": "Credential Guard в Microsoft Defender",
+ "customCompliance": "Настраиваемое соответствие",
+ "customConfiguration": "Пользовательский профиль конфигурации",
+ "customOMASettings": "Настраиваемые параметры OMA-URI",
+ "customPreferences": "Файл настроек",
+ "dFCISecuritySettings": "Настройки безопасности",
+ "defender": "Антивирусная программа в Microsoft Defender",
+ "defenderAntivirus": "Антивирусная программа в Microsoft Defender",
+ "defenderExploitGuard": "Exploit Guard в Microsoft Defender",
+ "defenderFirewall": "Брандмауэр Windows",
+ "defenderLocalSecurityOptions": "Параметры безопасности локального устройства",
+ "defenderSecurityCenter": "Центр безопасности в Microsoft Defender",
+ "deliveryOptimization": "Оптимизация доставки",
+ "derivedCredentialAuthenticationConfiguration": "Производные учетные данные",
+ "deviceExperience": "Интерфейс устройства",
+ "deviceFirmwareConfigurationInterface": "Интерфейс настройки встроенного ПО устройства",
+ "deviceGuard": "Управление приложениями в Microsoft Defender",
+ "deviceHealth": "Работоспособность устройств",
+ "devicePassword": "Пароль устройства",
+ "deviceProperties": "Свойства устройства",
+ "deviceRestrictions": "Общие",
+ "deviceSecurity": "Безопасность системы",
+ "display": "Отображение",
+ "domainJoin": "Присоединение к домену",
+ "domains": "Домены",
+ "edgeBrowser": "Устаревшие версии Microsoft Edge (версия 45 и более ранние версии)",
+ "edgeBrowserSmartScreen": "Фильтр SmartScreen в Microsoft Defender",
+ "edgeKiosk": "Режим киоска Microsoft Edge",
+ "editionUpgrade": "Обновление выпуска",
+ "education": "Образование",
+ "educationDeviceCerts": "Сертификаты устройств",
+ "educationStudentCerts": "Сертификаты учащихся",
+ "educationTakeATest": "Выполнить проверку",
+ "educationTeacherCerts": "Сертификаты преподавателей",
+ "emailProfile": "Электронная почта",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Расширение единого входа для приложения",
+ "filevault": "FileVault",
+ "firewall": "Брандмауэр",
+ "games": "Игры",
+ "gatekeeper": "Привратник",
+ "healthMonitoring": "Мониторинг работоспособности",
+ "homeScreenLayout": "Макет начального экрана",
+ "iOSWallpaper": "Фоновый рисунок",
+ "importedPFX": "Импортированный сертификат PKCS",
+ "iosDefenderAtp": "Microsoft Defender для конечной точки",
+ "iosKiosk": "Киоск",
+ "kernelExtensions": "Расширения ядра",
+ "keyboardAndDictionary": "Клавиатура и словарь",
+ "kiosk": "Киоск",
+ "kioskAndroidEnterprise": "Выделенные устройства",
+ "kioskConfiguration": "Киоск",
+ "kioskConfigurationV2": "Киоск",
+ "kioskWebBrowser": "Веб-браузер киоска",
+ "lockScreenMessage": "Сообщение на экране блокировки",
+ "lockedScreenExperience": "Интерфейс заблокированного экрана",
+ "logging": "Создание отчетов и телеметрия",
+ "loginItems": "Элементы входа",
+ "loginWindow": "Окно входа",
+ "macDefenderAtp": "Microsoft Defender для конечной точки",
+ "maintenance": "Обслуживание",
+ "malware": "Вредоносные программы",
+ "messaging": "Сообщения",
+ "microphonesAndSpeakers": "Микрофоны и динамики",
+ "networkBoundary": "Граница сети",
+ "networkProxy": "Прокси-сервер сети",
+ "notifications": "Уведомления приложений",
+ "pKCS": "Сертификат PKCS",
+ "password": "Пароль",
+ "personalProfile": "Личный профиль",
+ "personalization": "Персонализация",
+ "policyOverride": "Переопределение групповой политики",
+ "ports": "Порты",
+ "powerSettings": "Параметры управления питанием",
+ "printer": "Принтер",
+ "privacy": "Конфиденциальность",
+ "privacyPerApp": "Исключения конфиденциальности на приложение",
+ "privacyPreferences": "Параметры конфиденциальности",
+ "projection": "Проекция",
+ "radios": "Радио",
+ "sCCMCompliance": "Соответствие Configuration Manager",
+ "sCEP": "Сертификат SCEP",
+ "sCEPProperties": "Сертификат SCEP",
+ "sMode": "Смена режима (только программа предварительной оценки Windows)",
+ "safari": "Safari",
+ "search": "Поиск",
+ "session": "Сеанс",
+ "sharedDevice": "Общий iPad",
+ "sharedPCAccountManager": "Устройство коллективного пользования с общим доступом",
+ "singleSignOn": "Единый вход",
+ "smartScreen": "Фильтр SmartScreen в Microsoft Defender",
+ "softwareUpdates": "Параметры",
+ "start": "Начало",
+ "systemExtensions": "Расширения системы",
+ "systemSecurity": "Безопасность системы",
+ "trustedCert": "Доверенный сертификат",
+ "uEFIAccess": "Доступ к UEFI",
+ "updates": "Обновления",
+ "userRights": "Права пользователей",
+ "usersAndAccounts": "Пользователи и учетные записи",
+ "vPN": "Базовая VPN",
+ "vPNApps": "Автоподключение VPN",
+ "vPNAppsAndTrafficRules": "Приложения и правила трафика",
+ "vPNConditionalAccess": "Условный доступ",
+ "vPNConnectivity": "Подключение",
+ "vPNDNSTriggers": "Параметры DNS",
+ "vPNIKEv2": "Параметры IKEv2",
+ "vPNProxy": "Прокси",
+ "vPNSplitTunneling": "Раздельное туннелирование",
+ "vPNTrustedNetwork": "Обнаружение доверенной сети",
+ "wakeSettings": "Параметры пробуждения",
+ "webContentFilter": "Фильтр веб-содержимого",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender для конечной точки",
+ "windowsDefenderATP": "Microsoft Defender для конечной точки",
+ "windowsHelloForBusiness": "Windows Hello для бизнеса",
+ "windowsSpotlight": "Windows: интересное",
+ "wiredNetwork": "Проводная сеть",
+ "wireless": "Беспроводная",
+ "wirelessProjection": "Беспроводная проекция",
+ "workProfile": "Параметры рабочего профиля",
+ "workProfilePassword": "Пароль рабочего профиля",
+ "xboxServices": "Службы Xbox",
+ "zebraMx": "Профиль MX (только Zebra)",
+ "complianceActionsLabel": "Действия при несоответствии"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Разрешенные URL-адреса",
+ "tooltip": "Укажите сайты, разрешенные для доступа пользователей в рабочем контексте. Доступ к другим сайтам будет запрещен. Можно настроить либо список разрешенных, либо список заблокированных сайтов, но не оба одновременно. "
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Прокси приложения",
+ "title": "Перенаправление прокси приложения",
+ "tooltip": "Включите перенаправление прокси приложения, чтобы предоставить пользователям доступ к корпоративным ссылкам и локальным веб-приложениям."
+ },
+ "BlockedURLs": {
+ "title": "Заблокированные URL-адреса",
+ "tooltip": "Укажите сайты, заблокированные для доступа пользователей в рабочем контексте. Доступ к другим сайтам будет разрешен. Можно настроить либо список разрешенных, либо список заблокированных сайтов, но не оба одновременно. "
+ },
+ "Bookmarks": {
+ "header": "Управляемые закладки",
+ "tooltip": "Введите список URL-адресов с закладками, которые будут доступны пользователям при использовании Microsoft Edge в рабочем контексте.",
+ "uRL": "URL-адрес"
+ },
+ "HomepageURL": {
+ "header": "Управляемая домашняя страница",
+ "title": "URL-адрес ярлыка домашней страницы",
+ "tooltip": "Настройте ярлык домашней страницы, который будет первым значком, отображаемым под панелью поиска при открытии новой вкладки в Microsoft Edge"
+ },
+ "PersonalContext": {
+ "label": "Перенаправление сайтов с ограниченным доступом в личный контекст",
+ "tooltip": "Укажите, разрешено ли пользователям переходить в свой персональный контекст, чтобы открывать запрещенные сайты."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Номер SKU Windows Домашняя",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Выберите число битов, содержащееся в ключе.",
- "keyUsage": "Укажите криптографическое действие, необходимое для обмена открытым ключом сертификата.",
- "renewalThreshold": "Введите процент (от 1 до 99 %) оставшегося времени существования сертификата, по достижении которого устройство может запросить его продление. Рекомендуемое значение в Intune — 20 %. (1–99)",
- "rootCert": "Выберите ранее настроенный и назначенный профиль корневого сертификата ЦС. Сертификат ЦС должен совпадать с корневым сертификатом ЦС, выдающим сертификат для этого профиля (который вы сейчас настраиваете).",
- "scepServerUrl": "Введите URL-адрес сервера NDES, выдающего сертификаты по протоколу SCEP (требуется HTTPS), например https://contoso.com/certsrv/mscep/mscep.dll.",
- "scepServerUrls": "Добавьте URL-адреса для сервера NDES, который выдает сертификаты по протоколу SCEP (требуется HTTPS), например https://contoso.com/certsrv/mscep/mscep.dll.",
- "subjectAlternativeName": "Альтернативное имя субъекта",
- "subjectNameFormat": "Формат имени субъекта",
- "validityPeriod": "Время, оставшееся до истечения срока действия сертификата. Введите значение не больше срока действия, указанного в шаблоне сертификата. Значение по умолчанию — один год."
- },
- "appInstallContext": "Этот параметр задает контекст установки, связываемый с приложением. Для приложений в двойном режиме выберите нужный контекст. Для прочих приложений выбор делается заранее на основе пакета и не может быть изменен.",
- "autoUpdateMode": "Настройте приоритет обновления приложения. Выберите \"По умолчанию\", чтобы перед обновлением приложения устройство было подключено к сети Wi-Fi, заряжалось от источника питания и не находилось в состоянии активного использования. Выберите \"Высокая важность\", чтобы обновить приложение немедленно после его публикации разработчиком вне зависимости от состояния заряда, подключения к сети Wi-Fi или действий конечного пользователя на устройстве. Выберите \"Отложено\", чтобы отказаться от обновлений приложения на срок до 90 дней. Значения \"Высокая важность\" и \"Отложено\" применяются только для устройств DO.",
- "configurationSettingsFormat": "Текст формата для параметров конфигурации",
- "ignoreVersionDetection": "Задайте значение \"Да\" для приложений, которые автоматически обновляются разработчиком (например, Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Выберите \"Да\" для приложений, которые будут автоматически обновляться разработчиком или для которых нужно только проверить bundleID (ИД пакета) перед установкой. Выберите \"Нет\" для проверки bundleID и номера версии приложения перед установкой.",
- "installAsManagedMacOSLobApp": "Этот параметр применяется только к macOS 11 и более поздним версиям. Приложение будет установлено, но не будет управляться в версиях до macOS 10.15 включительно.",
- "installContextDropdown": "Выберите нужный контекст установки. В контексте пользователя приложение будет установлено только для целевого пользователя, а в контексте устройства — для всех пользователей на устройстве.",
- "ldapUrl": "Это имя узла LDAP, где клиенты могут получить открытые ключи шифрования для получателей электронной почты. Сообщения электронной почты будут зашифрованы, когда ключ станет доступен. Поддерживаемые форматы:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Выберите разрешения среды выполнения для связанного приложения.",
- "policyAssociatedApp": "Выберите приложение, с которым будет связана эта политика.",
- "policyConfigurationSettings": "Выберите способ для определения параметров конфигурации этой политики.",
- "policyDescription": "Дополнительно можно ввести описание этой политики конфигурации.",
- "policyEnrollmentType": "Выберите, как осуществляется управление этими параметрами: с помощью управления устройствами или приложений, созданных на основе пакета SDK Intune.",
- "policyName": "Введите имя политики конфигурации.",
- "policyPlatform": "Выберите платформу, к которой будет применена эта политика конфигурации приложений.",
- "policyProfileType": "Выберите типы профилей устройств, к которым будет применяться этот профиль конфигурации приложений.",
- "policySMime": "Настройка параметров подписи и шифрования S/MIME для Outlook.",
- "sMimeDeployCertsFromIntune": "Укажите, будут ли доставляться сертификаты S/MIME из Intune для использования с Outlook.\r\nIntune может автоматически развертывать пользователям сертификаты для подписи и шифрования через Корпоративный портал.",
- "sMimeEnable": "Укажите, включены ли элементы управления S/MIME при написании электронного письма.",
- "sMimeEnableAllowChange": "Укажите, разрешено ли пользователю изменять параметр \"Включить S/MIME\".",
- "sMimeEncryptAllEmails": "Укажите, должны ли шифроваться все электронные письма.\r\nШифрование преобразует данные в зашифрованный текст, чтобы их мог прочесть только получатель.",
- "sMimeEncryptAllEmailsAllowChange": "Укажите, разрешено ли пользователю изменять параметр \"Шифровать все электронные письма\".",
- "sMimeEncryptionCertProfile": "Укажите профиль сертификата для шифрования электронной почты.",
- "sMimeSignAllEmails": "Укажите, следует ли подписывать все электронные письма.\r\nЦифровая подпись проверяет подлинность письма и защищает от незаконного изменения содержимого при передаче.",
- "sMimeSignAllEmailsAllowChange": "Укажите, разрешено ли пользователю изменять параметр \"Подписать все электронные письма\".",
- "sMimeSigningCertProfile": "Укажите профиль сертификата для подписывания электронной почты.",
- "sMimeUserNotificationType": "Способ уведомления пользователей о необходимости открыть Корпоративный портал и получить сертификаты S/MIME для Outlook."
- },
+ "Languages": {
+ "ar-aE": "Арабский (ОАЭ)",
+ "ar-bH": "Арабский (Бахрейн)",
+ "ar-dZ": "Арабский (Алжир)",
+ "ar-eG": "Арабский (Египет)",
+ "ar-iQ": "Арабский (Ирак)",
+ "ar-jO": "Арабский (Иордания)",
+ "ar-kW": "Арабский (Кувейт)",
+ "ar-lB": "Арабский (Ливан)",
+ "ar-lY": "Арабский (Ливия)",
+ "ar-mA": "Арабский (Марокко)",
+ "ar-oM": "Арабский (Оман)",
+ "ar-qA": "Арабский (Катар)",
+ "ar-sA": "Арабский (Саудовская Аравия)",
+ "ar-sY": "Арабский (Сирия)",
+ "ar-tN": "Арабский (Тунис)",
+ "ar-yE": "Арабский (Йемен)",
+ "az-cyrl": "Азербайджанский (кириллица, Азербайджан)",
+ "az-latn": "Азербайджанский (латиница, Азербайджан)",
+ "bn-bD": "Бенгальский (Бангладеш)",
+ "bn-iN": "Бенгальский (Индия)",
+ "bs-cyrl": "Боснийский (кириллица)",
+ "bs-latn": "Боснийский (латиница)",
+ "zh-cN": "Китайский (КНР)",
+ "zh-hK": "Китайский (Гонконг, САР)",
+ "zh-mO": "Китайский (Макао, САР)",
+ "zh-sG": "Китайский (Сингапур)",
+ "zh-tW": "Китайский (Тайвань)",
+ "hr-bA": "Хорватский (латиница)",
+ "hr-hR": "Хорватский (Хорватия)",
+ "nl-bE": "Нидерландский (Бельгия)",
+ "nl-nL": "Нидерландский (Нидерланды)",
+ "en-aU": "Английский (Австралия)",
+ "en-bZ": "Английский (Белиз)",
+ "en-cA": "Английский (Канада)",
+ "en-cabn": "Английский (Карибские острова)",
+ "en-iE": "Английский (Ирландия)",
+ "en-iN": "Английский (Индия)",
+ "en-jM": "Английский (Ямайка)",
+ "en-mY": "Английский (Малайзия)",
+ "en-nZ": "Английский (Новая Зеландия)",
+ "en-pH": "Английский (Республика Филиппины)",
+ "en-sG": "Английский (Сингапур)",
+ "en-tT": "Английский (Тринидад и Тобаго)",
+ "en-uK": "Английский (Соединенное Королевство)",
+ "en-uS": "Английский (Соединенные Штаты)",
+ "en-zA": "Английский (Южная Африка)",
+ "en-zW": "Английский (Зимбабве)",
+ "fr-bE": "Французский (Бельгия)",
+ "fr-cA": "Французский (Канада)",
+ "fr-cH": "Французский (Швейцария)",
+ "fr-fR": "французский (Франция)",
+ "fr-lU": "Французский (Люксембург)",
+ "fr-mC": "Французский (Монако)",
+ "de-aT": "Немецкий (Австрия)",
+ "de-cH": "Немецкий (Швейцария)",
+ "de-dE": "Немецкий (Германия)",
+ "de-lI": "Немецкий (Лихтенштейн)",
+ "de-lU": "Немецкий (Люксембург)",
+ "iu-cans": "Инуктитут (слоговое письмо, Канада)",
+ "iu-latn": "Инуктитут (латиница, Канада)",
+ "it-cH": "Итальянский (Швейцария)",
+ "it-iT": "Итальянский (Италия)",
+ "ms-bN": "Малайский (Бруней-Даруссалам)",
+ "ms-mY": "Малайский (Малайзия)",
+ "mn-cN": "Монгольский (старомонгольское письмо, КНР)",
+ "mn-mN": "Монгольский (кириллица, Монголия)",
+ "no-nB": "Норвежский (букмол, Норвегия)",
+ "no-nn": "Норвежский (нюнорск, Норвегия)",
+ "pt-bR": "Португальский (Бразилия)",
+ "pt-pT": "Португальский (Португалия)",
+ "quz-bO": "Кечуа (Боливия)",
+ "quz-eC": "Кечуа (Эквадор)",
+ "quz-pE": "Кечуа (Перу)",
+ "smj-nO": "Луле-саамский (Норвегия)",
+ "smj-sE": "Луле-саамский (Швеция)",
+ "se-fI": "Северносаамский (Финляндия)",
+ "se-nO": "Северносаамский (Норвегия)",
+ "se-sE": "Северносаамский (Швеция)",
+ "sma-nO": "Южносаамский (Норвегия)",
+ "sma-sE": "Южносаамский (Швеция)",
+ "smn": "Инари-саамский (Финляндия)",
+ "sms": "Сколт-саамский (Финляндия)",
+ "sr-Cyrl-bA": "Сербский (кириллица)",
+ "sr-Cyrl-rS": "Сербский (кириллица, Сербия и Черногория (бывшая))",
+ "sr-Latn-bA": "Сербский (латиница)",
+ "sr-Latn-rS": "Сербский (латиница, Сербия)",
+ "dsb": "Нижнелужицкий (Германия)",
+ "hsb": "Верхнелужицкий (Германия)",
+ "es-es-tradnl": "Испанский (Испания, традиционная сортировка)",
+ "es-aR": "Испанский (Аргентина)",
+ "es-bO": "Испанский (Боливия)",
+ "es-cL": "Испанский (Чили)",
+ "es-cO": "Испанский (Колумбия)",
+ "es-cR": "Испанский (Коста-Рика)",
+ "es-dO": "Испанский (Доминиканская Республика)",
+ "es-eC": "Испанский (Эквадор)",
+ "es-eS": "Испанский (Испания)",
+ "es-gT": "Испанский (Гватемала)",
+ "es-hN": "Испанский (Гондурас)",
+ "es-mX": "Испанский (Мексика)",
+ "es-nI": "Испанский (Никарагуа)",
+ "es-pA": "Испанский (Панама)",
+ "es-pE": "Испанский (Перу)",
+ "es-pR": "Испанский (Пуэрто-Рико)",
+ "es-pY": "Испанский (Парагвай)",
+ "es-sV": "Испанский (Эль-Сальвадор)",
+ "es-uS": "Испанский (США)",
+ "es-uY": "Испанский (Уругвай)",
+ "es-vE": "Испанский (Венесуэла)",
+ "sv-fI": "Шведский (Финляндия)",
+ "uz-cyrl": "Узбекский (кириллица, Узбекистан)",
+ "uz-latn": "Узбекский (латиница, Узбекистан)",
+ "af": "Африкаанс (Южная Африка)",
+ "sq": "Албанский (Албания)",
+ "am": "Амхарский (Эфиопия)",
+ "hy": "Армянский (Армения)",
+ "as": "Ассамский (Индия)",
+ "ba": "Башкирский (Россия)",
+ "eu": "Баскский (Баскский)",
+ "be": "Белорусский (Беларусь)",
+ "br": "Бретонский (Франция)",
+ "bg": "Болгарский (Болгария)",
+ "ca": "Каталонский (Каталонский)",
+ "co": "Корсиканский (Франция)",
+ "cs": "Чешский (Чешская Республика)",
+ "da": "Датский (Дания)",
+ "dv": "Мальдивский (Мальдивы)",
+ "et": "Эстонский (Эстония)",
+ "fo": "Фарерский (Фарерские о-ва)",
+ "fil": "Филиппинский (Филиппины)",
+ "fi": "Финский (Финляндия)",
+ "gl": "Галисийский (Галисия)",
+ "ka": "Грузинский (Грузия)",
+ "el": "Греческий (Греция)",
+ "gu": "Гуджарати (Индия)",
+ "ha": "Хауса (латиница, Нигерия)",
+ "he": "Иврит (Израиль)",
+ "hi": "Хинди (Индия)",
+ "hu": "Венгерский (Венгрия)",
+ "is": "Исландский (Исландия)",
+ "ig": "Игбо (Нигерия)",
+ "id": "Индонезийский (Индонезия)",
+ "ga": "Ирландский (Ирландия)",
+ "xh": "Коса (Южная Африка)",
+ "zu": "Зулу (Южная Африка)",
+ "ja": "Японский (Япония)",
+ "kn": "Каннада (Индия)",
+ "kk": "Казахский (Казахстан)",
+ "km": "Кхмерский (Камбоджа)",
+ "rw": "Киньяруанда (Руанда)",
+ "sw": "Суахили (Кения)",
+ "kok": "Конкани (Индия)",
+ "ko": "Корейский (Корея)",
+ "ky": "Киргизский (Киргизия)",
+ "lo": "Лаосский (Лаосская Народно-Демократическая Республика)",
+ "lv": "Латвийский (Латвия)",
+ "lt": "Литовский (Литва)",
+ "lb": "Люксембургский (Люксембург)",
+ "mk": "Македонский (Северная Македония)",
+ "ml": "Малаялам (Индия)",
+ "mt": "Мальтийский (Мальта)",
+ "mi": "Маори (Новая Зеландия)",
+ "mr": "Маратхи (Индия)",
+ "moh": "Мохаук (племя Мохауков)",
+ "ne": "Непальский (Непал)",
+ "oc": "Окситанский (Франция)",
+ "or": "Ория (Индия)",
+ "ps": "Пушту (Афганистан)",
+ "fa": "Фарси",
+ "pl": "Польский (Польша)",
+ "pa": "Панджаби (Индия)",
+ "ro": "Румынский (Румыния)",
+ "rm": "Ретороманский (Швейцария)",
+ "ru": "Русский (Россия)",
+ "sa": "Санскрит (Индия)",
+ "st": "Северный сото (Южная Африка)",
+ "tn": "Тсвана (Южная Африка)",
+ "si": "Сингальский (Шри-Ланка)",
+ "sk": "Словацкий (Словакия)",
+ "sl": "Словенский (Словения)",
+ "sv": "Шведский (Швеция)",
+ "syr": "Сирийский (Сирия)",
+ "tg": "Таджикский (кириллица, Таджикистан)",
+ "ta": "Тамильский (Индия)",
+ "tt": "Татарский (Россия)",
+ "te": "Телугу (Индия)",
+ "th": "Тайский (Таиланд)",
+ "bo": "Тибетский (КНР)",
+ "tr": "Турецкий (Турция)",
+ "tk": "Туркменский (Туркменистан)",
+ "uk": "Украинский (Украина)",
+ "ur": "Урду (Исламская Республика Пакистан)",
+ "vi": "Вьетнамский (Вьетнам)",
+ "cy": "Валлийский (Соединенное Королевство)",
+ "wo": "Волоф (Сенегал)",
+ "ii": "носу (КНР)",
+ "yo": "Йоруба (Нигерия)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Встроенная роль",
+ "customCloudPCRole": "Настраиваемая роль Windows 365",
+ "customIntuneRole": "Настраиваемая роль Intune",
+ "customRole": "Настраиваемая роль"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "Версия приложения",
+ "dependencyName": "Имя зависимости",
+ "lastModifiedTime": "Время последнего изменения",
+ "relationship": "Связь",
+ "replaced": "Заменено",
+ "searchPlaceholder": "Фильтровать по имени приложения",
+ "status": "Сведения о состоянии",
+ "statusDetails": "Состояние",
+ "supersedenceName": "Имя замены"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Зависимость дочернего элемента",
+ "indirectSupersedence": "Нет прямой связи",
+ "supersedenceAncestors": "Заменяет",
+ "supersedenceDescendants": "Заменено"
+ },
+ "SupersededReplaced": {
+ "no": "Нет",
+ "yes": "Да"
+ },
+ "Tabs": {
+ "chart": "Диаграмма",
+ "dependency": "Зависимость",
+ "label": "Представление: ",
+ "supersedence": "Замена",
+ "table": "Таблица"
+ },
+ "dependencyGraphAriaLabel": "Диаграмма зависимости приложений",
+ "supersedenceGraphAriaLabel": "Диаграмма замены приложений"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Число дней до принудительной перезагрузки"
+ },
+ "Description": {
+ "label": "Описание"
+ },
+ "Name": {
+ "label": "Имя"
+ },
+ "QualityUpdateRelease": {
+ "label": "Ускоренная установка исправлений, если версия ОС устройства ниже:"
+ },
+ "bladeTitle": "Исправления для Windows 10 и более поздних версий (предварительная версия)",
+ "loadError": "Не удалось выполнить загрузку!"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Параметры"
+ },
+ "infoBoxText": "Единственным выделенным элементом управления исправлениями, который доступен в настоящее время, за исключением существующей политики кругов обновления для Windows 10 и более поздних версий, является возможность ускорения исправлений для устройств, находящихся ниже указанного уровня исправлений. Дополнительные элементы управления станут доступны в будущем.",
+ "licenseLearnMoreText": "Дополнительные сведения о предварительных требованиях и политиках качественного обновления.",
+ "licenseWarningBoxText": "Для создания политик качественного обновления требуется специальное лицензирование.",
+ "warningBoxText": "Хотя ускорение обновлений программного обеспечения позволит быстрее обеспечить соответствие требованиям, весьма вероятно, что оно нарушит работу пользователей из-за необходимости перезагрузки в рабочие часы."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "На Android можно разрешить использование идентификации по отпечатку пальца вместо ПИН-кода. Пользователям будет предложено предоставить свой отпечаток пальца при доступен к этому приложению с помощью рабочей учетной записи.",
+ "iOS": "На устройствах iOS или iPadOS можно разрешить идентификацию с помощью отпечатка пальца вместо ПИН-кода. При открытии этого приложения с рабочей учетной записью пользователи будут получать запрос на предоставление отпечатков пальцев.",
+ "mac": "На устройствах Mac можно разрешить идентификацию с помощью отпечатка пальца вместо ПИН-кода. При открытии этого приложения с рабочей учетной записью пользователи будут получать запрос на предоставление отпечатка."
+ },
+ "allowWidgetContentSync": "Выберите \"Блокировать\", чтобы запретить приложениям, управляемым политикой, сохранять данные в мини-приложениях приложений. Если вы выберете \"Разрешить\", приложение, управляемое политикой, сможет сохранять данные в мини-приложениях приложения, если эти функции поддерживаются и включены в приложении, управляемом политикой. \r\n\r\n \r\n\r\nПриложения могут предоставлять дополнительные возможности настройки с помощью политик конфигурации приложений. Дополнительные сведения см. в документации приложения.",
+ "appSharingFromLevel1": "Выберите один из следующих вариантов, чтобы указать приложения, от которых это приложение может получать данные.",
+ "appSharingFromLevel2": "{0}: разрешить получение данных из корпоративных документов и учетных записей только других управляемых политикой приложений.",
+ "appSharingFromLevel3": "{0}: разрешить получение данных из корпоративных документов и учетных записей любого приложения.",
+ "appSharingFromLevel4": "{0}: заблокировать получение данных из корпоративных документов и учетных записей любого приложения.",
+ "appSharingFromLevel5": "{0}: разрешает передачу данных из любого приложения и учитывает все входящие данные, не имеющие удостоверения пользователя, как данные организации.",
+ "appSharingToLevel1": "Выберите один из следующих вариантов, чтобы указать приложения, которым это приложение может отправлять данные.",
+ "appSharingToLevel2": "{0}: разрешить отправку корпоративных данных только в другие управляемые политикой приложения.",
+ "appSharingToLevel3": "{0}: разрешить отправку корпоративных данных в любые приложения.",
+ "appSharingToLevel4": "{0}: заблокировать отправку корпоративных данных в любые приложения.",
+ "appSharingToLevel5": "{0}: разрешает передачу данных только в другие управляемые политиками приложения и передачу файлов в управляемые приложения MDM на зарегистрированных устройствах.",
+ "appSharingToLevel6": "{0}: разрешить передачу данных только в другие приложения, управляемые политикой, и фильтровать показ только управляемых политикой приложений в диалоговых окнах ОС \\\"Открыть в\\\"/\\\"Поделиться\\\".",
+ "assignmentFilterEdit1": "При применении фильтров назначений к этой политике свойство \"Тип управления устройствами\" будет применяться дополнительно к значениям, указанным для параметров \"Поддержка приложений на любых типах устройств\" и \"Типы устройств\" на странице \"Приложения\".",
+ "assignmentFilterEdit2": "Дополнительные сведения о назначении политик защиты приложений.",
+ "conditionalEncryption1": "Выберите {0}, чтобы отключить шифрование приложений для внутреннего хранилища приложений, если на зарегистрированном устройстве обнаружено шифрование устройства.",
+ "conditionalEncryption2": "Примечание. Intune может обнаружить регистрацию устройств только с помощью Intune MDM. Внешнее хранилище приложений будет по-прежнему зашифровано, чтобы неуправляемые приложения не могли получить доступ к данным.",
+ "contactSyncMac": "Если этот параметр отключен, приложения не могут сохранять контакты в свою адресную книгу.",
+ "contactsSync": "Выберите Заблокировать, чтобы запретить приложениям, управляемым политикой, сохранять данные в собственных приложениях устройства (например, в контактах, календаре и мини-приложениях) или запретить использование надстроек в приложениях, управляемых политикой. При выборе варианта Разрешить управляемое политикой приложение сможет сохранять данные в собственных приложениях или использовать надстройки, если эти функции поддерживаются и включены в приложении, управляемом политикой.
Приложения могут предоставлять дополнительную возможность настройки с помощью политик конфигурации приложений. Дополнительные сведения см. в документации приложения.",
+ "deviceTypeTargetingCreate1": "Действие по определению типа устройства перемещено на шаг \"Назначения\" процесса создания политики.",
+ "deviceTypeTargetingEdit1": "При применении фильтров назначений к этой политике свойство \"Тип управления устройствами\" будет применяться дополнительно к значениям, указанным для параметров \"Поддержка приложений на любых типах устройств\" и \"Типы устройств\" на странице \"Приложения\".",
+ "deviceTypeTargetingEdit2": "Чтобы изменить определение типа управления устройствами, сбросьте параметр \"Поддержка приложений на любых типах устройств\" со значением \"Да\". Затем создайте фильтр назначения MAM с требуемыми значениями для свойства \"Тип управления устройствами\".",
+ "deviceTypeTargetingHasMoved": "Дополнительные сведения о назначении политик защиты приложений",
+ "encryptionAndroid1": "Для приложений, связанных с политикой управления мобильными приложениями Intune, шифрование обеспечивается средствами Майкрософт. Данные шифруются синхронно при выполнении операций ввода-вывода с файлами в соответствии с параметрами политики. Управляемые приложения Android используют шифрование AES-128 в режиме CBC с помощью библиотек платформы. Метод шифрования не соответствует стандарту FIPS 140-2. Шифрование SHA-256 поддерживается в виде явной инструкции с использованием параметра SigAlg и работает только на устройствах с операционной системой версии 4.2 и выше. Содержимое в хранилище устройства всегда зашифровано.",
+ "encryptionAndroid2": "Когда в политике приложения указывается на необходимость шифрования, конечному пользователю необходимо настроить ПИН-код и использовать его для доступа к устройству. Если ПИН-код не настроен, приложение не запустится и конечный пользователь увидит следующее сообщение: \\\"По требованию вашей организации для доступа к приложению нужно сначала задать ПИН-код для устройства\\\".",
+ "encryptionMac1": "Для приложений, связанных с политикой управления мобильными приложениями Intune, шифрование обеспечивается средствами Майкрософт. Данные шифруются синхронно при выполнении операций ввода-вывода с файлами в соответствии с параметрами политики. Управляемые приложения на Mac используют шифрование AES-128 в режиме CBC с помощью библиотек платформы. Метод шифрования не соответствует стандарту FIPS 140-2. Шифрование SHA-256 поддерживается в виде явной инструкции с использованием параметра SigAlg и работает только на устройствах с операционной системой версии 4.2 и выше. Содержимое в хранилище устройства всегда зашифровано.",
+ "faceId1": "При необходимости вы можете разрешить пользователям доступ к этому приложению с рабочих учетных записей через идентификацию лиц вместо ПИН-кода.",
+ "faceId2": "Выберите Да, чтобы разрешить использовать идентификацию лиц вместо ПИН-кода для доступа к приложению.",
+ "managementLevelsAndroid1": "Этот параметр позволяет задать применение политики к устройствам администратора устройств Android, устройствам Android Enterprise или неуправляемым устройствам.",
+ "managementLevelsAndroid2": "{0}: неуправляемые устройства — это устройства, на которых не найдено управление Intune MDM. Сюда входят сторонние поставщики MDM.",
+ "managementLevelsAndroid3": "{0}: управление устройствами с помощью API администрирования устройств Android в Intune.",
+ "managementLevelsAndroid4": "{0}: управление устройствами с рабочих профилей Android Enterprise или полное управление устройствами Android Enterprise в Intune.",
+ "managementLevelsIos1": "Этот параметр позволяет указать, применяется ли эта политика к управляемым или неуправляемым устройствам MDM.",
+ "managementLevelsIos2": "{0}: неуправляемые устройства — это устройства, на которых не найдено управление Intune MDM. Сюда входят сторонние поставщики MDM.",
+ "managementLevelsIos3": "{0}: управляемые устройства управляются через Intune MDM.",
+ "minAppVersion": "Укажите обязательную минимальную версию приложения, которая нужна пользователю для безопасного доступа к приложению.",
+ "minAppVersionWarning": "Укажите рекомендуемую минимальную версию приложения, которая нужна пользователю для безопасного доступа к приложению.",
+ "minOsVersion": "Укажите обязательную минимальную версию ОС, которая нужна пользователю для безопасного доступа к приложению.",
+ "minOsVersionWarning": "Укажите рекомендуемую минимальную версию ОС, которая нужна пользователю для безопасного доступа к приложению.",
+ "minPatchVersion": "Определите самый старый уровень исправлений для системы безопасности Android, допустимый для пользователя при безопасном доступе к приложению.",
+ "minPatchVersionWarning": "Определите рекомендуемый уровень исправлений для системы безопасности Android для пользователя при безопасном доступе к приложению.",
+ "minSdkVersion": "Укажите обязательную минимальную версию пакета SDK для политики защиты приложений Intune, которая нужна пользователю для безопасного доступа к приложению.",
+ "requireAppPinDefault": "
Выберите Да, чтобы отключить ПИН-код приложения, если на зарегистрированном устройстве обнаружена блокировка.
",
+ "targetAllApps1": "Этот параметр позволяет использовать политику как целевую в приложениях на устройствах с любым состоянием управления.",
+ "targetAllApps2": "При разрешении конфликта политик этот параметр будет заменен, если у пользователя есть целевая политика для определенного состояния управления.",
+ "touchId2": "Выберите {0}, чтобы для доступа к приложению требовалась идентификация с помощью отпечатка пальца вместо ПИН-кода."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Укажите количество дней, по истечении которых будет затребован сброс ПИН-кода.",
+ "previousPinBlockCount": "Этот параметр определяет число предыдущих ПИН-кодов, которые будут храниться в Intune. Все новые ПИН-коды должны отличаться от тех, которые хранятся в Intune."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Это разрешит службе поиска Windows продолжить поиск в зашифрованных данных.",
+ "authoritativeIpRanges": "Включите этот параметр, если хотите переопределить автообнаружение диапазонов IP-адресов Windows.",
+ "authoritativeProxyServers": "Включите этот параметр, если хотите переопределить автообнаружение прокси-серверов Windows.",
+ "checkInput": "Проверить допустимость входных данных",
+ "dataRecoveryCert": "Сертификат восстановления — это специальный сертификат шифрованной файловой системы (EFS), который вы можете использовать для восстановления зашифрованных файлов при утере или повреждении ключа шифрования. Нужно создать сертификат восстановления и указать его здесь. Дополнительные сведения",
+ "enterpriseCloudResources": "
Укажите облачные ресурсы, которые будут считаться корпоративными и защищаться политикой Windows Information Protection. Можно указать несколько ресурсов, разделив записи символом \\\"|\\\".
Если в вашей организации настроен прокси-сервер, вы можете указать прокси-сервер, через который будет направляться трафик в облачные ресурсы.
URL[,Proxy]|URL[,Proxy]
Без прокси-сервера: contoso.sharepoint.com|contoso.visualstudio.com С прокси-сервером: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Укажите диапазоны IPv4-адресов, которые формируют вашу корпоративную сеть. Они используются вместе с доменными именами корпоративной сети, определяющими границу корпоративной сети.
Для этого параметра нужно включить Windows Information Protection.
Можно указать несколько диапазонов, разделив их запятой.
Укажите диапазоны IPv6-адресов, которые формируют корпоративную сеть. Они используются вместе с доменными именами корпоративной сети, определяющими границу корпоративной сети.
Можно указать несколько диапазонов, разделив их запятой.
Если в вашей организации настроен прокси-сервер, укажите прокси-сервер, через который будет направляться трафик к облачным ресурсам, указанным в параметрах корпоративных облачных ресурсов.
Можно указать несколько значений, разделив их точкой с запятой.
Укажите DNS-имена, которые формируют вашу корпоративную сеть. Они используются вместе с диапазонами IP-адресов для определения границы корпоративной сети. Можно указать несколько значений, разделив их запятой.
Для этого параметра нужно включить Windows Information Protection.
Пример: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Укажите DNS-имена, которые формируют вашу корпоративную сеть. Они используются вместе с диапазонами IP-адресов, указанными для определения границ корпоративной сети. Можно указать несколько значений, разделив отдельные записи с помощью \\\"|\\\".
Этот параметр требуется для включения Windows Information Protection.
Пример: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
Если в вашей корпоративной сети внешние прокси-серверы, укажите их здесь. При указании адреса прокси-сервера нужно также указать порт, через который будет разрешено направлять трафик и защищать его с помощью Windows Information Protection.
Примечание. Этот список не должен включать серверы в списке внутренних прокси-серверов. Можно указать несколько значений, разделив их точкой с запятой.
",
+ "maxInactivityTime1": "Указывает максимальное количество времени (в минутах) при простое до блокировки устройства с помощью ПИН-кода или пароля. Пользователи могут выбрать любое значение времени ожидания в пределах указанных максимальных значений в приложении \\\"Параметры\\\". Обратите внимание, что для Lumia 950 и 950XL максимальное время ожидания — пять минут независимо от значения, заданного политикой.",
+ "maxInactivityTime2": "0 (по умолчанию) — время ожидания не задано. Значение по умолчанию \\\"0\\\" значит, что время ожидания не задано.",
+ "maxPasswordAttempts1": "У этой политики разное поведение на мобильном устройстве и компьютере.",
+ "maxPasswordAttempts2": "На мобильном устройстве, когда пользователь достигает значения, заданного политикой, происходит очистка устройства.",
+ "maxPasswordAttempts3": "На компьютере, когда пользователь достигает значения, заданного политикой, очистка устройства не выполняется. Вместо этого компьютер переходит в режим восстановления BitLocker, в котором данные недоступны, но их можно восстановить. Если BitLocker не включен, политику невозможно применить.",
+ "maxPasswordAttempts4": "Перед достижением предельного числа неудачных попыток пользователь переходит на экран блокировки и получает предупреждение, что компьютер будет заблокирован. При достижении предельного числа попыток устройство автоматически перезагрузится и откроет страницу восстановления BitLocker. На этой странице пользователь получит приглашение указать ключ восстановления BitLocker.",
+ "maxPasswordAttempts5": "0 (по умолчанию) — устройство не очищается после ввода неправильного ПИН-кода или пароля.",
+ "maxPasswordAttempts6": "Самое безопасное значение — 0, если все значения политики равны нулю. В противном случае самое безопасное значение — минимальное значение политики.",
+ "mdmDiscoveryUrl": "Укажите URL-адрес конечной точки регистрации MDM, с помощью которого пользователи будут регистрироваться в MDM. По умолчанию он указывается для Intune.",
+ "minimumPinLength1": "Целое значение, которое задает минимальное число символов ПИН-кода. Значение по умолчанию — 4. Наименьшее число, которое можно указать для этого параметра политики — 4. Наибольшее число должно быть меньше указанного в параметре \\\"Максимальная длина ПИН-кода\\\" или равно числу 127 в зависимости от того, что окажется меньше.",
+ "minimumPinLength2": "Если вы настроите этот параметр политики, длина ПИН-кода должна быть не меньше этого числа. Если вы отключите или не настроите этот параметр, длина ПИН-кода должна быть не меньше четырех символов.",
+ "name": "Имя границы сети",
+ "neutralResources": "
Если в вашей организации есть конечные точки перенаправления проверки подлинности, укажите их здесь. Указанные расположения считаются личными или корпоративными в зависимости от контекста подключения перед перенаправлением.
Можно указать несколько значений, разделив их запятой.
Пример: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Значение, которое задает Windows Hello для бизнеса в качестве способа входа в Windows.",
+ "passportForWork2": "Значение по умолчанию — ИСТИНА. Если для этой политики установлено значение ЛОЖЬ, пользователь не сможет подготовить Windows Hello для бизнеса, за исключением мобильных телефонов, подключенных к Microsoft Entra, где требуется подготовка.",
+ "pinExpiration": "Наибольшее число, которое можно указать для политики, — 730, а наименьшее — 0. Если задан параметр политики 0, ПИН-код бессрочный.",
+ "pinHistory1": "Наибольшее число, которое можно указать для политики, — 50, а наименьшее — 0. Если задан параметр политики 0, хранение предыдущих ПИН-кодов не требуется.",
+ "pinHistory2": "Текущий ПИН-код пользователя включен в набор ПИН-кодов, связанных с учетной записью пользователя. Журнал ПИН-кодов не сохраняется после сброса ПИН-кода.",
+ "protectUnderLock": "Защищает содержимое приложения, когда устройство заблокировано.",
+ "protectionModeBlock": "
Блокировать: блокирует перемещение корпоративных данных из защищенных приложений.
",
+ "protectionModeOff": "
Отключено. Пользователь может перемещать данные из защищенных приложений. Действия не записываются в журнал.
",
+ "protectionModeOverride": "
Разрешить переопределения. Пользователь получает запрос при попытке переместить данные из защищенного приложения в незащищенное. Если он отклонит этот запрос, действие будет записано в журнал.
",
+ "protectionModeSilent": "
Автоматически. Пользователь может перемещать данные из защищенных приложений. Эти действия записываются в журнал.
",
+ "required": "Обязательно",
+ "revokeOnMdmHandoff": "Добавлена в Windows 10 версии 1703. Эта политика контролирует отзыв ключей WIP при обновлении устройства с MAM до MDM. Если она отключена, ключи не будут отозваны и пользователь сохранит доступ к защищенным файлам после обновления. Это рекомендуемый режим, если в службе MDM настроен тот же EnterpriseID WIP, что и в службе MAM.",
+ "revokeOnUnenroll": "Ключи шифрования будут отозваны при отмене регистрации устройства в политике.",
+ "rmsTemplateForEdp": "GUID TemplateID, который используется для шифрования RMS. Шаблон Azure RMS позволяет ИТ-администратору настроить сведения о том, у кого есть доступ к файлу, защищенному RMS, и длительность этого доступа.",
+ "showWipIcon": "Это позволит пользователю узнать, когда он выступает от лица организации, путем наложения значка.",
+ "useRmsForWip": "Указывает, следует ли разрешить шифрование Azure RMS для WIP."
+ },
+ "requireAppPin": "
Выберите Да, чтобы отключить ПИН-код приложения, если на зарегистрированном устройстве обнаружена блокировка.
Примечание. Intune не может обнаружить регистрацию устройств в стороннем решении EMM в iOS или iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Создание настраиваемого сценария",
+ "edit": "Изменение настраиваемого сценария"
+ },
+ "basicInfo": "Создайте новый настраиваемый пакет сценариев на основе написанных вами сценариев обнаружения и исправления.",
+ "customScriptCapitalized": "Пользовательский сценарий",
+ "customScriptLowercase": "пользовательский сценарий",
+ "detectionScript": "Сценарий обнаружения"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "По умолчанию",
+ "header": "Приоритет обновления",
+ "postponed": "Отложено",
+ "priority": "Высокий приоритет"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Автоматическое обновление",
+ "sublabel": "Если замененные приложения были установлены пользователем с корпоративного портала, необходимо установить заменяемое приложение."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Фон",
+ "displayText": "Скачивание содержимого в {0}",
+ "foreground": "Передний план",
+ "header": "Приоритет оптимизации доставки"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Разрешить пользователю отложить уведомление о перезапуске",
+ "countdownDialog": "Выберите, когда следует отображать диалоговое окно обратного отсчета перед перезапуском (в минутах)",
+ "durationInMinutes": "Льготный период для перезапуска устройства (в минутах)",
+ "snoozeDurationInMinutes": "Выберите, на сколько отложить (в минутах)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Часовой пояс",
+ "local": "Часовой пояс устройства",
+ "utc": "Время в формате UTC"
+ },
+ "dateAndTimeLabel": "Дата и время",
+ "deadlineTimeColumnLabel": "Крайний срок установки",
+ "deadlineTimeDatePickerErrorMessage": "Выбранная дата окончания должна следовать за доступной датой.",
+ "deadlineTimeLabel": "Крайний срок установки приложения",
+ "defaultTime": "Как можно скорее",
+ "infoText": "Это приложение будет доступно сразу после развертывания, если не указано время доступности ниже. Если это обязательное приложение, можно указать крайний срок установки.",
+ "specificTime": "Конкретные дата и время",
+ "startTimeColumnLabel": "Доступность",
+ "startTimeDatePickerErrorMessage": "Выбранная дата должна предшествовать дате крайнего срока.",
+ "startTimeLabel": "Доступность приложения"
+ },
+ "restartGracePeriodHeader": "Льготный период для перезапуска",
+ "restartGracePeriodLabel": "Льготный период для перезапуска устройства",
+ "summaryTitle": "Взаимодействие с пользователем"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Назначьте настраиваемый атрибут хотя бы одной группе. Изменить назначения можно в разделе \"Свойства\".",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Скрипт оболочки",
"successfullySavedPolicy": "Сохранено {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64-разрядный",
+ "thirtyTwoBit": "32-разрядный"
+ },
+ "Countries": {
+ "ae": "ОАЭ",
+ "ag": "Антигуа и Барбуда",
+ "ai": "Ангилья",
+ "al": "Албания",
+ "am": "Армения",
+ "ao": "Ангола",
+ "ar": "Аргентина",
+ "at": "Австрия",
+ "au": "Австралия",
+ "az": "Азербайджан",
+ "bb": "Барбадос",
+ "be": "Бельгия",
+ "bf": "Буркина-Фасо",
+ "bg": "Болгария",
+ "bh": "Бахрейн",
+ "bj": "Бенин",
+ "bm": "Бермуды",
+ "bn": "Бруней-Даруссалам",
+ "bo": "Боливия",
+ "br": "Бразилия",
+ "bs": "Багамы",
+ "bt": "Бутан",
+ "bw": "Ботсвана",
+ "by": "Беларусь",
+ "bz": "Белиз",
+ "ca": "Канада",
+ "cg": "Республика Конго",
+ "ch": "Швейцария",
+ "cl": "Чили",
+ "cn": "Китай",
+ "co": "Колумбия",
+ "cr": "Коста-Рика",
+ "cv": "Кабо-Верде",
+ "cy": "Кипр",
+ "cz": "Чешская Республика",
+ "de": "Германия",
+ "dk": "Дания",
+ "dm": "Доминика",
+ "do": "Доминиканская Республика",
+ "dz": "Алжир",
+ "ec": "Эквадор",
+ "ee": "Эстония",
+ "eg": "Египет",
+ "es": "Испания",
+ "fi": "Финляндия",
+ "fj": "Фиджи",
+ "fm": "Федеративные Штаты Микронезии",
+ "fr": "Франция",
+ "gb": "Соединенное Королевство",
+ "gd": "Гренада",
+ "gh": "Гана",
+ "gm": "Гамбия",
+ "gr": "Греция",
+ "gt": "Гватемала",
+ "gw": "Гвинея-Бисау",
+ "gy": "Гайана",
+ "hk": "Гонконг",
+ "hn": "Гондурас",
+ "hr": "Хорватия",
+ "hu": "Венгрия",
+ "id": "Индонезия",
+ "ie": "Ирландия",
+ "il": "Израиль",
+ "in": "Индия",
+ "is": "Исландия",
+ "it": "Италия",
+ "jm": "Ямайка",
+ "jo": "Иордания",
+ "jp": "Япония",
+ "ke": "Кения",
+ "kg": "Киргизия",
+ "kh": "Камбоджа",
+ "kn": "Сент-Китс и Невис",
+ "kr": "Республика Корея",
+ "kw": "Кувейт",
+ "ky": "Острова Кайман",
+ "kz": "Казахстан",
+ "la": "Лаосская Народно-Демократическая Республика",
+ "lb": "Ливан",
+ "lc": "Сент-Люсия",
+ "lk": "Шри-Ланка",
+ "lr": "Либерия",
+ "lt": "Литва",
+ "lu": "Люксембург",
+ "lv": "Латвия",
+ "md": "Республика Молдова",
+ "mg": "Мадагаскар",
+ "mk": "Северная Македония",
+ "ml": "Мали",
+ "mn": "Монголия",
+ "mo": "Макао",
+ "mr": "Мавритания",
+ "ms": "Монтсеррат",
+ "mt": "Мальта",
+ "mu": "Маврикий",
+ "mw": "Малави",
+ "mx": "Мексика",
+ "my": "Малайзия",
+ "mz": "Мозамбик",
+ "na": "Намибия",
+ "ne": "Нигер",
+ "ng": "Нигерия",
+ "ni": "Никарагуа",
+ "nl": "Нидерланды",
+ "no": "Норвегия",
+ "np": "Непал",
+ "nz": "Новая Зеландия",
+ "om": "Оман",
+ "pa": "Панама",
+ "pe": "Перу",
+ "pg": "Папуа — Новая Гвинея",
+ "ph": "Филиппины",
+ "pk": "Пакистан",
+ "pl": "Польша",
+ "pt": "Португалия",
+ "pw": "Палау",
+ "py": "Парагвай",
+ "qa": "Катар",
+ "ro": "Румыния",
+ "ru": "Россия",
+ "sa": "Саудовская Аравия",
+ "sb": "Соломоновы Острова",
+ "sc": "Сейшелы",
+ "se": "Швеция",
+ "sg": "Сингапур",
+ "si": "Словения",
+ "sk": "Словакия",
+ "sl": "Сьерра-Леоне",
+ "sn": "Сенегал",
+ "sr": "Суринам",
+ "st": "Сан-Томе и Принсипи",
+ "sv": "Эль-Сальвадор",
+ "sz": "Свазиленд",
+ "tc": "о-ва Тёркс и Кайкос",
+ "td": "Чад",
+ "th": "Таиланд",
+ "tj": "Таджикистан",
+ "tm": "Туркменистан",
+ "tn": "Тунис",
+ "tr": "Турция",
+ "tt": "Тринидад и Тобаго",
+ "tw": "Тайвань",
+ "tz": "Танзания",
+ "ua": "Украина",
+ "ug": "Уганда",
+ "us": "США",
+ "uy": "Уругвай",
+ "uz": "Узбекистан",
+ "vc": "Сент-Винсент и Гренадины",
+ "ve": "Венесуэла",
+ "vg": "Виргинские о-ва (Великобритания)",
+ "vn": "Вьетнам",
+ "ye": "Йемен",
+ "za": "ЮАР",
+ "zw": "Зимбабве"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Этот параметр невозможно настроить с помощью OMA-URI, так как он доступен в каталоге параметров. Перейдите в каталог параметров, чтобы настроить этот параметр."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Выберите файл профиля конфигурации"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Эти параметры применяются к устройствам, которые были зарегистрированы как с утверждением пользователя, так и без него в рамках процесса регистрации устройств, а также к тем, что зарегистрированы с помощью автоматической регистрации устройств (ранее — DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Регистрация устройств и автоматическая регистрация устройств",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Регистрация устройств и автоматическая регистрация устройств",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Настройте Microsoft Launcher на полностью управляемых устройствах.",
+ "deviceExperienceTypeDescription": "В зависимости от того, какой интерфейс вы хотите настроить, выберите режим киоска или Microsoft Launcher, чтобы начать настройку интерфейса на своих устройствах. Если вы не выберете тип взаимодействия устройства, пользователи увидят интерфейс главного экрана устройства по умолчанию.",
+ "deviceExperienceTypeKioskMode": "Режим киоска (выделенный и полностью управляемый)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Используйте Microsoft Launcher для настройки интерфейса начального экрана на управляемых устройствах организации. Если это средство будет средством запуска по умолчанию, пользователи устройств не смогут использовать другое средство запуска.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Сделать Microsoft Launcher средством запуска по умолчанию",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (только полностью управляемый)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Пользователи не смогут изменить фоновый рисунок, если это не разрешено. Этот параметр доступен только при настройке пользовательского фонового рисунка.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Разрешить пользователю изменять фоновый рисунок",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Позволяет использовать собственное изображение в качестве фонового рисунка на начальном экране и выбрать, может ли пользователь изменить его. Если пользовательский фоновый рисунок не настроен, на устройстве будет сохранен текущий фоновый рисунок.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Настроить пользовательский фоновый рисунок",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Это изображение будет использоваться в качестве фонового рисунка на начальном экране устройства. Это поле доступно только при настройке пользовательского фонового рисунка.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Введите URL-адрес изображения фонового рисунка",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Отключено",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Скрыть",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Показать",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Если вы разрешаете пользователю показывать и скрывать закрепленную панель, то для начального развертывания будет использовано предыдущее значение параметра. Для последующих развертываний этот параметр применяться не будет, чтобы учесть изменения, которые могли быть внесены пользователем. Этот параметр доступен только в том случае, если вы настроили отображение закрепленной панели.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Разрешение пользователю показывать и скрывать закрепленную панель",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Закрепленная панель — это меню, предоставляющее пользователям быстрый доступ к приложениям и инструментам. Когда она скрыта, пользователю необходимо провести пальцем вверх для доступа к закрепленной панели.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Наличие закрепленной панели",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Если вы разрешаете пользователю включать и отключать веб-канал, то для начального развертывания будет использовано предыдущее значение параметра. Для последующих развертываний этот параметр применяться не будет, чтобы учесть изменения, которые могли быть внесены пользователем. Этот параметр доступен только в том случае, если вы включили веб-канал запуска.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Разрешить пользователю включать и отключать веб-канал",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Веб-канал — это дополнительный экран справа от главного экрана, на котором пользователи могут получить доступ к календарям, документам и последним действиям. Если не включить веб-канал, он останется отключенным. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Включить веб-канал запуска",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Расположение панели поиска",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Внизу",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Скрыть",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Сверху",
+ "deviceExperienceTypeName": "Тип взаимодействия устройства",
"deviceGuardCredentialGuardDescription": "Включение с блокировкой UEFI гарантирует, что Credential Guard невозможно отключить удаленно. Включение без блокировки UEFI позволит удаленно отключить Credential Guard с помощью групповой политики.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Идентификатор устройства Intune",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Число дней до перехода с автоматического перезапуска (запланированного за пределами периода активности) к запланированному перезапуску, который должен быть запланирован пользователем.",
"engagedRestartTransitionScheduleName": "Переход пользователей к запланированному запуску после автоматического перезапуска (в днях)",
"enhancedOption": "Усиленный (1903 и более ранние версии)",
- "enrollmentProfileTypeDedicatedDevice": "Выделенное устройство",
- "enrollmentProfileTypeDescription": "Выберите тип профиля регистрации, чтобы начать настройку Microsoft Launcher или \"Управляемый главный экран\" Microsoft на устройствах. В противном случае пользователи увидят главный экран устройства по умолчанию.",
- "enrollmentProfileTypeFullyManaged": "Полностью управляемое",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Настройте Microsoft Launcher на полностью управляемых устройствах.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Используйте Microsoft Launcher для настройки интерфейса начального экрана на управляемых устройствах организации. Если это средство будет средством запуска по умолчанию, пользователи устройств не смогут использовать другое средство запуска.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Сделать Microsoft Launcher средством запуска по умолчанию",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Разрешить пользователю изменять фоновый рисунок",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Позволяет использовать собственное изображение в качестве фонового рисунка на начальном экране и выбрать, может ли пользователь изменить его. Если пользовательский фоновый рисунок не настроен, на устройстве будет сохранен текущий фоновый рисунок.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Настроить пользовательский фоновый рисунок",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Это изображение будет использоваться в качестве фонового рисунка на начальном экране устройства. Это поле доступно только при настройке пользовательского фонового рисунка.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Введите URL-адрес изображения фонового рисунка",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Отключено",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Скрыть",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Показать",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Закрепленная панель — это меню, предоставляющее пользователям быстрый доступ к приложениям и инструментам. Когда она скрыта, пользователю необходимо провести пальцем вверх для доступа к закрепленной панели.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Наличие закрепленной панели",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Разрешить пользователю включать и отключать веб-канал",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Веб-канал — это дополнительный экран справа от главного экрана, на котором пользователи могут получить доступ к календарям, документам и последним действиям. Если не включить веб-канал, он останется отключенным. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Включить веб-канал запуска",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Расположение панели поиска",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Внизу",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Скрыть",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Вверху",
- "enrollmentProfileTypeName": "Тип профиля регистрации",
"enrollmentSettingsHeading": "Параметры регистрации",
"enterOnlyOneForDns": "Укажите список DNS-серверов или прокси-сервер.",
"enterpriseModeLoggingExample": "например, http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Полностью управляемые устройства с корпоративным рабочем профилем",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Эти параметры применяются только к полностью управляемым и выделенным устройствам.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Полностью управляемые и выделенные устройства",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Эти параметры работают только для полностью управляемых и выделенных устройств, работающих с политикой киоска.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Полностью управляемые и выделенные устройства (только в режиме киоска)",
"gameCenterBlockedMacDescription": "Вариант \"Да\" отключает Game Center, а значок Game Center удаляется с начального экрана. Доступно для устройств с macOS 10.13 или более поздних версий.",
"gameCenterBlockedMacName": "Блокировать Game Center",
"gamingPageDescription": "Блокировка доступа к играм в приложении \"Параметры\".",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Настраивает тип входа для доступа к приложениям на этом устройстве киоска.",
"kioskShowTaskbarDesc": "Отображение или скрытие панели задач Windows в киоске.",
"kioskShowTaskbarName": "Панель задач Windows",
+ "kioskSingleInfoBoxText": "Режим киоска с одним приложением: блокирует устройство для запуска выбранного приложения. Чтобы использовать этот режим, необходимо сначала утвердить и назначить выбранное приложение из рабочей нагрузки клиентских приложений. На полностью управляемых устройствах будет применяться только одно выбранное приложение — \"Управляемый главный экран\". Все остальные приложения будут считаться обязательными.",
"kioskStartDateTime": "Время начала периода обслуживания",
"kioskStartMenuLayoutXmlDesc": "Укажите схему XML, которая определяет порядок показа приложений в меню \"Пуск\"",
"kioskStartMenuLayoutXmlDescV2": "Импорт XML-файла, настраивающего макет начального экрана, переопределяет существующий порядок отображения и выбранный размер плиток. Дополнительные сведения",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Должен быть допустимым путем к файлу",
"mustBeAValidHttpsUrl": "Это должен быть допустимый URL-адрес HTTPS",
"mustBeAValidIPAddress": "Это должен быть допустимый IP-адрес (например, 192.168.0.1 или 2001:0db8:85a3:0000:0000:8a2e:0370:7334).",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Значение должно представлять собой допустимый IP-адрес или полное доменное имя с необязательным номером порта.",
"mustBeAValidIPv4Address": "Требуется допустимый IPv4-адрес (например, 192.168.0.1)",
"mustBeAValidIPv6Address": "Это должен быть допустимый IPv6-адрес (например, 2001:0db8:85a3:0000:0000:8a2e:0370:7334).",
"mustBeAValidImageUrl": "Это должен быть допустимый URL-адрес изображения, например www.contoso.com/image.jpg.",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Правила брандмауэра Windows из локального хранилища (общедоступные сети)",
"publicNetworkName": "Публичная сеть (необнаруживаемая)",
"publicOutboundConnectionsSummaryLabel": "Действие по умолчанию для исходящих подключений (общедоступные сети)",
- "publicPlayStoreEnabledDescription": "Пользователи получат доступ ко всем приложениям за исключением тех приложений, которые помечены как удаляемые в разделе \"Клиентские приложения\". Если выбрать для этого параметра значение \"Не настроено\", пользователи получат доступ только к приложениям, которые помечены как доступные или обязательные в разделе \"Клиентcкие приложения\".",
+ "publicPlayStoreEnabledDescription": "Если вы выберете \"Разрешить\", пользователи получат доступ ко всем приложениям, кроме тех, которые вы потребовали удалить в клиентских приложениях. Если вы выберете для этого параметра \"Блокировать\" или \"Не настроено\", пользователи смогут получить доступ только к тем приложениям, которые вы указали как доступные или необходимые в клиентских приложениях.",
"publicPlayStoreEnabledName": "Разрешить доступ ко всем приложениям в магазине Google Play",
- "publicPlayStoreEnabledWarning": "Если выбрать \"Разрешить\", пользователи смогут устанавливать любые приложения из Google Play Маркет. Если затем изменить выбор на \"Не настроено\", все приложения, явно не разрешенные для пользователя, будут удалены с устройства.",
+ "publicPlayStoreEnabledWarning": "Если выбрать \"Разрешить\", пользователи смогут устанавливать все приложения из Google Play Store. Если позже вы изменить выбор на \"Блокировать\" или \"Не настроено\", все приложения будут удалены с устройства, за исключением приложений, указанных как доступные или необходимые в клиентских приложениях.",
+ "publicPlayStoreSelectionAllowList": "Блокировать",
+ "publicPlayStoreSelectionBlockList": "Разрешить",
+ "publicPlayStoreSelectionNotConfigured": "Не настроено",
"publicShieldedSummaryLabel": "Экранированные (общедоступные сети)",
"publicStealthModeSummaryLabel": "Скрытый режим (общедоступные сети)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Одноадресные отклики на многоадресный широковещательный трафик (общедоступные сети)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Идет удаление...",
"photoLibrary": "Медиатека",
"pinCharSettingTooltip": "Цифровой ПИН-код допускает только цифры. \r\n\r\nСекретный код должен включать буквы, цифры и допустимые символы.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Внимание! 1 июня 2024 г. приложения с пакетом SDK версии ниже 17.7.0 перестанут получать обновления политики защиты приложений, и пользователям будет запрещено запускать приложение. Убедитесь, что пользователи обновляют свои приложения, а бизнес-приложения используют пакет SDK или оболочку свежей версии. Подробнее",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Платформа",
"platformDropDownLabel": "Платформа",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Устройство",
"licenseTypeUser": "Пользователь"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Свойство",
- "rule": "Правило",
- "ruleDetails": "Сведения о правиле",
- "value": "Значение"
- },
- "assignIf": "Назначить профиль, если",
- "deleteWarning": "Это приведет к удалению выбранного правила применимости.",
- "dontAssignIf": "Не назначать профиль, если",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "и еще {0}",
- "instructions": "Укажите, как применить этот профиль в назначенной группе. Intune применит профиль только к устройствам, соответствующим объединенным критериям этих правил.",
- "maxText": "Максимум",
- "minText": "Минимум",
- "noActionRow": "Правила применимости не указаны.",
- "oSVersion": "Пример: 1.2.3.4.",
- "toText": "по",
- "windows10Education": "Windows 10/11 для образовательных учреждений",
- "windows10EducationN": "Windows 10/11 для образовательных учреждений N",
- "windows10Enterprise": "Windows 10/11 Корпоративная",
- "windows10EnterpriseN": "Windows 10/11 Корпоративная N",
- "windows10HolographicEnterprise": "Windows 10 Holographic для бизнеса",
- "windows10Home": "Windows 10/11 Домашняя",
- "windows10HomeChina": "Windows 10 Домашняя (Китай)",
- "windows10HomeN": "Windows 10/11 Домашняя N",
- "windows10HomeSingleLanguage": "Windows 10/11 Домашняя для одного языка",
- "windows10IoTCore": "Windows 10 IoT Базовая",
- "windows10IoTCoreCommercial": "Windows 10 IoT Базовая для коммерческих организаций",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Корпоративная",
- "windows10OsEdition": "Выпуск ОС",
- "windows10OsVersion": "Версия ОС",
- "windows10Professional": "Windows 10/11 Профессиональная",
- "windows10ProfessionalEducation": "Windows 10/11 профессиональная для образовательных учреждений",
- "windows10ProfessionalEducationN": "Windows 10/11 Профессиональная для образовательных учреждений N",
- "windows10ProfessionalN": "Windows 10 Профессиональная N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Профессиональная Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Профессиональная Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Равно",
- "greaterThan": "Больше",
- "greaterThanOrEqualTo": "Больше или равно",
- "lessThan": "Меньше чем",
- "lessThanOrEqualTo": "меньше чем или равно",
- "notEqualTo": "не равно"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Принудительная проверка подписи сценария и автоматический запуск сценария",
- "enforceSignatureCheckTooltip": "Выберите \"Да\", чтобы убедиться, что сценарий подписан доверенным издателем, что позволит выполнять сценарий без отображения предупреждений или запросов. Сценарий будет выполнен без блокировки. Выберите \"Нет\" (по умолчанию) для выполнения сценария с подтверждением конечного пользователя без проверки подписи.",
- "header": "Использование настраиваемого сценария обнаружения",
- "runAs32Bit": "Запуск сценария как 32-разрядного процесса на 64-разрядных клиентах",
- "runAs32BitTooltip": "Выберите \"Да\", чтобы запустить сценарий в 32-разрядном процессе на 64-разрядных клиентах. Выберите \"Нет\" (по умолчанию), чтобы запустить сценарий в 64-разрядном процессе на 64-разрядных клиентах. 32-разрядные клиенты выполняют сценарий в 32-разрядном процессе.",
- "scriptContent": "Содержимое сценария",
- "scriptFile": "Файл сценария",
- "scriptFileNotSelectedValidation": "Файл сценария не выбран.",
- "scriptFileTooltip": "Выберите сценарий PowerShell, который будет определять наличие приложения на клиенте. Приложение обнаружено, если сценарий возвращает код выхода 0 и записывает строковое значение в STDOUT.",
- "scriptSizeLimitValidation": "Размер сценария обнаружения превышает максимально допустимый. Устраните эту проблему, уменьшив размер сценария обнаружения."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Дата создания",
- "dateModified": "Дата изменения",
- "doesNotExist": "Файл или папка не существует.",
- "fileOrFolderExists": "Файл или папка существует",
- "sizeInMB": "Размер в МБ",
- "version": "Строка (версия)"
- },
- "associatedWith32Bit": "Связанные с 32-разрядным приложением на 64-разрядных клиентах",
- "associatedWith32BitTooltip": "Выберите \"Да\", чтобы развернуть все переменные среды PATH в 32-разрядном контексте на 64-разрядных клиентах. Выберите \"Нет\" (по умолчанию), чтобы развернуть все переменные среды PATH в 64-разрядном контексте на 64-разрядных клиентах. 32-разрядные клиенты всегда будут использовать 32-разрядный контекст.",
- "detectionMethod": "Метод обнаружения",
- "detectionMethodTooltip": "Выберите тип метода обнаружения, используемого для проверки наличия приложения.",
- "fileOrFolder": "Файл или папка",
- "fileOrFolderToolTip": "Файл или папка для обнаружения.",
- "operator": "Оператор",
- "operatorTooltip": "Выберите оператор для метода обнаружения, используемого для проверки сравнения.",
- "path": "Путь",
- "pathTooltip": "Полный путь к папке, содержащей файл или папку для обнаружения.",
- "value": "Значение",
- "valueTooltip": "Выберите значение, которое соответствует выбранному методу обнаружения. Методы обнаружения даты должны вводиться с использованием местного времени."
- },
- "GridColumns": {
- "pathOrCode": "Путь/код",
- "type": "Тип"
- },
- "MsiRule": {
- "operator": "Оператор",
- "operatorTooltip": "Выберите оператор для сравнения проверки версии продукта MSI.",
- "productCode": "Код продукта MSI",
- "productCodeTooltip": "Допустимый код продукта MSI для приложения.",
- "productVersion": "Значение",
- "productVersionCheck": "Проверка версии продукта MSI",
- "productVersionCheckTooltip": "Выберите \"Да\", чтобы проверять версию продукта MSI в дополнение к коду продукта MSI.",
- "productVersionTooltip": "Введите версию продукта MSI для приложения."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Сравнение целых чисел",
- "keyDoesNotExist": "Раздел не существует",
- "keyExists": "Раздел существует",
- "stringComparison": "Сравнение строк",
- "valueDoesNotExist": "Значение не существует",
- "valueExists": "Значение существует",
- "versionComparison": "Сравнение версий"
- },
- "associatedWith32Bit": "Связанные с 32-разрядным приложением на 64-разрядных клиентах",
- "associatedWith32BitTooltip": "Выберите \"Да\", чтобы выполнить поиск в 32-разрядном реестре на 64-разрядных клиентах. Выберите \"Нет\" (по умолчанию), чтобы выполнить поиск в 64-разрядном реестре на 64-разрядных клиентах. 32-разрядные клиенты всегда будут выполнять поиск в 32-разрядном реестре.",
- "detectionMethod": "Метод обнаружения",
- "detectionMethodTooltip": "Выберите тип метода обнаружения, используемого для проверки наличия приложения.",
- "keyPath": "Путь к разделу",
- "keyPathTooltip": "Полный путь к записи реестра, содержащей значение для обнаружения.",
- "operator": "Оператор",
- "operatorTooltip": "Выберите оператор для метода обнаружения, используемого для проверки сравнения.",
- "value": "Значение",
- "valueName": "Имя параметра",
- "valueNameTooltip": "Имя отслеживаемого значения реестра.",
- "valueTooltip": "Выберите значение, которое соответствует выбранному методу обнаружения."
- },
- "RuleTypeOptions": {
- "file": "Файл",
- "mSI": "MSI",
- "registry": "Реестр"
- },
- "gridAriaLabel": "Правила обнаружения",
- "header": "Создайте правило, указывающее на наличие приложения.",
- "noRulesSelectedPlaceholder": "Правила не указаны.",
- "ruleTableLimit": "Можно добавить до 25 правил обнаружения.",
- "ruleType": "Тип правила",
- "ruleTypeTooltip": "Выберите тип добавляемого правила обнаружения."
- },
- "RuleConfigurationOptions": {
- "customScript": "Использование настраиваемого сценария обнаружения",
- "manual": "Ручная настройка правил обнаружения"
- },
- "bladeTitle": "Правила обнаружения",
- "header": "Настройте правила, определяемые приложением, используемые для обнаружения наличия приложения.",
- "rulesFormat": "Формат правил",
- "rulesFormatTooltip": "Выберите ручную настройку правил обнаружения или используйте настраиваемый сценарий для определения наличия приложения.",
- "selectorLabel": "Правила обнаружения"
+ "BooleanActions": {
+ "allow": "Разрешить",
+ "block": "Блокировать",
+ "configured": "Настроено",
+ "disable": "Отключить",
+ "dontRequire": "Не требовать",
+ "enable": "Включить",
+ "hide": "Скрыть",
+ "limit": "Ограничение",
+ "notConfigured": "Не настроено",
+ "require": "Требовать",
+ "show": "Показать",
+ "yes": "Да"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Параметры SmartScreen, рекомендованные для приложения Microsoft Edge: Windows 10 в шаблоне конфигурации облака. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Обнаружение и нейтрализация атак на конечные точки"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "Изоляция приложения и браузера",
- "aSRApplicationControl": "Управление приложениями",
- "aSRAttackSurfaceReduction": "Правила сокращения направлений атак",
- "aSRDeviceControl": "Управление устройством",
- "aSRExploitProtection": "Защита от эксплойтов",
- "aSRWebProtection": "Защита от веб-угроз (устаревшая версия Microsoft Edge)",
- "aVExclusions": "Исключения антивирусной программы в Microsoft Defender",
- "antivirus": "Антивирусная программа в Microsoft Defender",
- "cloudPC": "Базовые показатели системы безопасности для Windows 365",
- "default": "Безопасность конечных точек",
- "defenderTest": "Демонстрация Microsoft Defender для конечной точки",
- "diskEncryption": "BitLocker",
- "eDR": "Обнаружение и нейтрализация атак на конечные точки",
- "edgeSecurityBaseline": "Базовая конфигурация Microsoft Edge",
- "edgeSecurityBaselinePreview": "Предварительная версия: базовые показатели Microsoft Edge",
- "editionUpgradeConfiguration": "Обновление выпуска и переключение режима",
- "firewall": "Брандмауэр Windows",
- "firewallRules": "Правила брандмауэра Windows",
- "identityProtection": "Защита учетных записей",
- "identityProtectionPreview": "Защита учетных записей (предварительная версия)",
- "mDMSecurityBaseline1810": "Базовая конфигурация безопасности MDM для Windows 10 и более поздних версий на октябрь 2018 г.",
- "mDMSecurityBaseline1810Preview": "Предварительная версия базового плана безопасности MDM для Windows 10 и более поздних версий на октябрь 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Предварительная версия базовой конфигурации безопасности MDM для Windows 10 за октябрь 2018 (бета-версия)",
- "mDMSecurityBaseline1906": "Базовая конфигурация безопасности MDM для Windows 10 и более поздних версий на май 2019 г.",
- "mDMSecurityBaseline2004": "Базовая конфигурация безопасности MDM для Windows 10 и более поздних версий за август 2020 г.",
- "mDMSecurityBaseline2101": "Базовая конфигурация безопасности MDM для Windows 10 и более поздних версий за декабрь 2020 г.",
- "macOSAntivirus": "Антивирус",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "Брандмауэр macOS",
- "microsoftDefenderBaseline": "Базовые показатели Microsoft Defender для конечной точки",
- "office365Baseline": "Базовая конфигурация Microsoft Office O365",
- "office365BaselinePreview": "Предварительная версия: базовый показатель Microsoft Office O365",
- "securityBaselines": "Базовые показатели системы безопасности",
- "test": "Тестовый шаблон",
- "testFirewallRulesSecurityTemplateName": "Правила брандмауэра Windows (тест)",
- "testIdentityProtectionSecurityTemplateName": "Защита учетных записей (тест)",
- "windowsSecurityExperience": "Интерфейс безопасности Windows"
- },
- "Firewall": {
- "mDE": "Брандмауэр Windows"
- },
- "FirewallRules": {
- "mDE": "Правила брандмауэра Windows"
- },
- "OneDriveKnownFolderMove": {
- "description": "Параметры перемещения известных папок OneDrive: Windows 10 в шаблоне конфигурации облака. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Защита учетной записи",
- "administrativeTemplates": "Административные шаблоны",
- "androidCompliancePolicy": "Политика соответствия для Android",
- "aospDeviceOwnerCompliancePolicy": "Политика соответствия для Android (AOSP)",
- "applicationControl": "Управление приложениями для бизнеса",
- "attackSurfaceReductionRules": "Правила уменьшения уязвимой зоны",
- "bitlocker": "BitLocker",
- "custom": "Пользовательская",
- "deliveryOptimization": "Оптимизация доставки",
- "derivedPersonalIdentityVerificationCredential": "Производные учетные данные",
- "deviceControl": "Управление устройствами",
- "deviceFeatures": "Функции устройства",
- "deviceFirmwareConfigurationInterface": "Интерфейс настройки встроенного ПО устройства",
- "deviceLock": "Блокировка устройства",
- "deviceOwner": "Полностью управляемый, выделенный и корпоративный рабочий профиль",
- "deviceRestrictions": "Ограничения устройств",
- "deviceRestrictionsWindows10Team": "Ограничения для устройств (Windows 10 для совместной работы)",
- "domainJoinPreview": "Присоединение к домену",
- "editionUpgradeAndModeSwitch": "Обновление выпуска и переключение режима",
- "education": "Образование",
- "email": "Электронная почта",
- "emailSamsungKnoxOnly": "Электронная почта (только Samsung KNOX)",
- "endpointProtection": "Защита конечных точек",
- "expeditedCheckin": "Конфигурация управления мобильным устройством",
- "exploitProtection": "Защита от эксплойтов",
- "extensions": "Расширения",
- "hardwareConfigurations": "Конфигурации BIOS и другие параметры",
- "identityProtection": "Защита идентификации",
- "iosCompliancePolicy": "Политика соответствия для iOS",
- "kiosk": "Киоск",
- "localUsersAndGroups": "Изменение членства пользователей в группе",
- "macCompliancePolicy": "Политика соответствия для Mac",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Базовая конфигурация безопасности Приложений Microsoft 365 для предприятий",
- "microsoftDefenderAntivirus": "Антивирусная программа в Microsoft Defender",
- "microsoftDefenderAntivirusexclusions": "Исключения антивирусной программы в Microsoft Defender",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender для конечной точки (настольные компьютеры под управлением Windows 10 или более поздних версий)",
- "microsoftDefenderFirewallRules": "Правила брандмауэра Windows",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Базовая конфигурация безопасности для Microsoft Edge",
- "mxProfileZebraOnly": "Профиль MX (только Zebra)",
- "networkBoundary": "Граница сети",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Переопределение групповой политики",
- "pkcsCertificate": "Сертификат PKCS",
- "pkcsImportedCertificate": "Импортированный сертификат PKCS",
- "preferenceFile": "Файл настроек",
- "presets": "Предустановки",
- "scepCertificate": "Сертификат SCEP",
- "secureAssessmentEducation": "Безопасная оценка (образование)",
- "securityBaselineForHololens2Advanced": "Расширенная базовая конфигурация безопасности для HoloLens 2",
- "securityBaselineForHololens2Standard": "Стандартная базовая конфигурация безопасности для HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Базовая конфигурация безопасности для Microsoft Edge",
- "settingsCatalog": "Каталог параметров",
- "sharedMultiUserDevice": "Устройство коллективного пользования с общим доступом",
- "softwareUpdates": "Обновления программного обеспечения",
- "trustedCertificate": "Доверенный сертификат",
- "unknown": "Неизвестно",
- "unsupported": "Не поддерживается",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Импорт Wi-Fi",
- "windows10CompliancePolicy": "Политика соответствия для Windows 10/11",
- "windows10MobileCompliancePolicy": "Политика соответствия для Windows 10 Mobile",
- "windows10XScep": "Сертификат SCEP — тест",
- "windows10XTrustedCertificate": "Доверенный сертификат — тест",
- "windows10XVPN": "VPN — тест",
- "windows10XWifi": "WIFI — тест",
- "windows11SecurityBaseline": "Базовая конфигурация безопасности для Windows 10 и более поздних версий",
- "windows365SecurityBaseline": "Базовые показатели системы безопасности для Windows 365",
- "windows8CompliancePolicy": "Политика соответствия для Windows 8",
- "windowsHealthMonitoring": "Мониторинг работоспособности Windows",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Политика соответствия для Windows Phone",
- "windowsUpdateforBusiness": "Центр обновления Windows для бизнеса",
- "wiredNetwork": "Проводная сеть",
- "workProfile": "Личный рабочий профиль"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Сделать обновление доступным постепенно",
- "immediateStart": "Сделать обновление доступным как можно скорее",
- "startDateOnly": "Сделать обновление доступным в указанную дату"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Управляемые устройства",
- "devicesWithoutEnrollment": "Управляемые приложения"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Фильтр",
- "assignmentFilterTypeColumnHeader": "Режим фильтра",
- "assignmentToast": "Уведомления для конечных пользователей",
- "assignmentTypeTableHeader": "Тип назначения",
- "autoUpdate": "Автоматическое обновление",
- "deadlineTimeColumnLabel": "Крайний срок установки",
- "deliveryOptimizationPriorityHeader": "Приоритет оптимизации доставки",
- "groupTableHeader": "Группа",
- "installContextLabel": "Контекст установки",
- "isRemovable": "Установить как удаляемое",
- "licenseTypeLabel": "Тип лицензии",
- "modeTableHeader": "Групповой режим",
- "policySet": "Набор политик",
- "preventAutoAppUpdate": "Блокировать автоматическое обновление приложения",
- "preventManagedAppBackup": "Запретить резервное копирование приложений iCloud",
- "restartGracePeriodHeader": "Льготный период перезапуска",
- "startTimeColumnLabel": "Доступность",
- "tracks": "Пути",
- "uninstallOnRemoval": "Удаление при удалении устройства",
- "updateMode": "Приоритет обновления",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "Веб-приложение AAD",
- "androidEnterpriseSystemApp": "Системное приложение Android Enterprise",
- "androidForWorkApp": "Приложение управляемого Google Play Маркета",
- "androidLobApp": "Бизнес-приложение для Android",
- "androidStoreApp": "Приложение для Магазина Android",
- "builtInAndroid": "Встроенное приложение для Android",
- "builtInApp": "Встроенное приложение",
- "builtInIos": "Встроенное приложение для iOS",
- "iosIPadOSWebClip": "Веб-клип iOS/iPadOS",
- "iosLobApp": "Бизнес-приложение для iOS",
- "iosStoreApp": "Приложение iOS Store",
- "iosVppApp": "Приложение iOS Volume Purchase Program",
- "lineOfBusinessApp": "Бизнес-приложение",
- "macOSDmgApp": "Приложение macOS (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Бизнес-приложение macOS",
- "macOSMicrosoftDefenderApp": "ATP в Microsoft Defender (macOS)",
- "macOSOfficeSuiteApp": "Пакет Office для macOS",
- "macOSPkgApp": "Приложение macOS (PKG)",
- "macOSWebClip": "Веб-клип macOS",
- "macOsVppApp": "Приложение macOS Volume Purchase Program",
- "managedAndroidLobApp": "Управляемое бизнес-приложение для Android",
- "managedAndroidStoreApp": "Управляемое приложение Магазина Android",
- "managedGooglePlayApp": "Приложение управляемого Google Play Маркета",
- "managedGooglePlayPrivateApp": "Частное приложение управляемого Google Play",
- "managedGooglePlayWebApp": "Веб-ссылка управляемого Google Play",
- "managedIosLobApp": "Управляемое бизнес-приложение для iOS",
- "managedIosStoreApp": "Управляемое приложение Магазина iOS",
- "microsoftStoreForBusinessApp": "Приложение Магазина Майкрософт для бизнеса",
- "microsoftStoreForBusinessReleaseManagedApp": "Магазин Майкрософт для бизнеса",
- "officeAddIn": "Надстройка Office",
- "officeSuiteApp": "Приложения Microsoft 365 (Windows 10 и более поздних версий)",
- "sharePointApp": "Приложение SharePoint",
- "teamsApp": "Приложение Teams",
- "webApp": "Веб-ссылка",
- "win32CatalogApp": "Приложение каталога Windows (Win32)",
- "winGetPublicApp": "Репозиторий сообщества диспетчера пакетов Windows",
- "winGetStoreApp": "Приложение Microsoft Store (новое)",
- "windowsAppXLobApp": "Бизнес-приложение Windows AppX",
- "windowsClassicApp": "Приложение Windows (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 и более поздних версий)",
- "windowsMobileMsiLobApp": "Бизнес-приложение Windows MSI",
- "windowsPhone81AppXBundleLobApp": "Бизнес-приложение Windows Phone 8.1 AppX",
- "windowsPhone81AppXLobApp": "Бизнес-приложение Windows Phone 8.1 AppX",
- "windowsPhone81StoreApp": "Приложение Магазина Windows Phone 8.1",
- "windowsPhoneXapLobApp": "Бизнес-приложение Windows Phone XAP",
- "windowsStoreApp": "Приложение Microsoft Store (прежних версий)",
- "windowsUniversalAppXLobApp": "Универсальное бизнес-приложение Windows AppX",
- "windowsUniversalLobApp": "Универсальное бизнес-приложение Windows",
- "windowsWebApp": "Веб-ссылка Windows"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Исключено",
- "include": "Включено",
- "includeAllDevicesVirtualGroup": "Включено",
- "includeAllUsersVirtualGroup": "Включено"
- },
- "AssignmentToast": {
- "hideAll": "Скрывать все всплывающие уведомления",
- "showAll": "Показывать все всплывающие уведомления",
- "showReboot": "Показывать всплывающие уведомления о перезапуске компьютера"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Да",
- "notConfigured": "Нет"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Фон",
- "displayText": "Скачивание содержимого в {0}",
- "foreground": "Передний план",
- "header": "Приоритет оптимизации доставки"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "Установка приложения может привести к перезапуску устройства",
- "basedOnReturnCode": "Определять режим по кодам возврата",
- "force": "Intune выполнит принудительную перезагрузку устройства",
- "suppress": "Без определенных действий"
- },
- "FilterType": {
- "exclude": "Исключить",
- "include": "Включить",
- "none": "Нет"
- },
- "InstallIntent": {
- "available": "Доступно для зарегистрированных устройств",
- "availableWithoutEnrollment": "Доступно с регистрацией или без регистрации",
- "notApplicable": "неприменимо",
- "required": "Обязательно",
- "uninstall": "Удалить"
- },
- "SettingType": {
- "assignmentType": "Тип назначения",
- "deviceLicensing": "Тип лицензии",
- "installContext": "Удаление при удалении устройства",
- "toastSettings": "Уведомления для конечных пользователей",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "По умолчанию",
- "postponed": "Отложено",
- "priority": "Высокий приоритет"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Настройка устройств для начальной подготовки.",
- "title": "Подготовка устройства"
- },
- "EnrollmentSettings": {
- "description": "Настройте параметры регистрации, например блокировку регистрации и назначение пользователям.",
- "title": "Параметры регистрации"
- },
- "OSConfiguration": {
- "menuDescription": "Настройте параметры, которые пользователи смогут использовать для восстановления Windows с загрузочного устройства флэш-памяти.",
- "menuTitle": "Конфигурация восстановления операционной системы Windows"
- },
- "coManagementAuthorityDesc": "Настройка параметров совместного управления для интеграции Configuration Manager",
- "coManagementAuthorityTitle": "Параметры совместного управления ",
- "deploymentProfiles": "Профили развертывания Windows AutoPilot",
- "description": "Дополнительные сведения о семи способах регистрации ПК с Windows 10/11 в Intune пользователями или администраторами.",
- "descriptionLabel": "Методы регистрации Windows",
- "enrollmentStatusPage": "Страница состояния регистрации"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Автоматическое утверждение всех рекомендуемых обновления драйверов",
- "manual": "Ручное утверждение и развертывание обновлений драйверов"
- },
- "BulkActions": {
- "button": "Массовые действия"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Метод утверждения:"
- },
- "DeploymentDeferralInDays": {
- "label": "Сделать обновления доступными после",
- "units": "(дн.)",
- "value": "{0} дн."
- },
- "DriverAction": {
- "header": "Выберите действие ниже.",
- "label": "Действие драйвера",
- "placeholder": "Выберите действие"
- },
- "IncludedDrivers": {
- "label": "Включенные драйверы"
- },
- "SelectDrivers": {
- "header": "Выберите водителей для включения в массовое действие"
- },
- "SelectDriversToInclude": {
- "button": "Выберите драйверы для включения"
- },
- "SelectLessDrivers": {
- "validation": "Можно выбрать не более ста драйверов"
- },
- "SelectMoreDrivers": {
- "validation": "Необходимо выбрать хотя бы один драйвер"
- },
- "SelectedDrivers": {
- "label": "Выбранные драйверы"
- },
- "availabilityDate": "Сделать доступным в Центре обновления Windows",
- "bladeTitle": "Обновления драйверов Windows 10 и более поздних версий (предварительная версия)",
- "lastSync": "Последняя синхронизация:",
- "lastSyncDefaultText": "Ожидание первоначального сбора данных инвентаризации",
- "loadError": "Не удалось выполнить загрузку!"
- },
- "DriverStatus": {
- "approved": "Утверждено",
- "declined": "Отклонено",
- "export": "Экспорт рекомендуемых драйверов",
- "needsReview": "Требуется проверка",
- "paused": "Приостановлено"
- },
- "DriversToReview": {
- "text": "{0} для проверки"
- },
- "Subtitle": {
- "automatic": "Политика автоматического утверждения обновления драйверов",
- "manual": "Политика ручного утверждения обновления драйверов"
- },
- "SyncNotification": {
- "failure": "Не удалось синхронизировать {0}",
- "failureDescription": "Произошла ошибка, и не удалось выполнить запрошенную синхронизацию. Повторите попытку.",
- "pending": "Синхронизация {0} выполняется",
- "pendingDescription": "Извлекаются последние данные. Этот процесс может занять несколько минут.",
- "success": "Синхронизация {0} завершена",
- "successDescription": "Синхронизация со службой \"Центр обновления Windows для бизнеса\" завершена в {0}"
- },
- "SyncSpinner": {
- "text": "Выполняется синхронизация. Это может занять несколько минут. Следите за оповещением об окончании синхронизации или вернитесь на эту страницу позже."
- },
- "TabName": {
- "basics": "Основные сведения",
- "driverUpdateSettings": "Параметры",
- "otherDrivers": "Другие драйверы",
- "properties": "Свойства",
- "recommendedDrivers": "Рекомендуемые драйверы"
- },
- "driverAddFilter": "Добавить фильтр",
- "driverApplicableDevices": "Применимые устройства",
- "driverApprovalStatus": "Состояние",
- "driverBulkActions": "Массовые действия",
- "driverClass": "Класс драйвера",
- "driverCount": "Отображаются записи с {0} по {1} из {2}.",
- "driverFilterNoneSelected": "Ничего не выбрано",
- "driverManufacturer": "Производитель",
- "driverName": "Имя драйвера",
- "driverNameLower": "развертывание обновления дайвера windows",
- "driverNameUpper": "развертывание обновления дайвера Windows",
- "driverRefresh": "Обновить",
- "driverReleaseDate": "Дата выпуска",
- "driverSearch": "Поиск",
- "driverSearchKeyword": "Введите ключевое слово поиска",
- "driverVersion": "Версия",
- "firstDeploymentDate": "Первое развертывание",
- "infoBoxText": "После назначения и создания политики до заполнения инвентаризации может пройти до 24 часов",
- "textBlockText": "Выберите параметры политик утверждения и развертывания. Выберите настройку политики для автоматического или ручного утверждения и развертывания обновлений. Изменение метода утверждения после создания политики не предусмотрено, но изменения, внесенные в индивидуальные утверждения и сведения о развертывании, возможны после сборки инвентаризации для назначенных устройств."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Используйте эти параметры, чтобы получать оповещения об установке приложений, запрещенных для использования в организации. Выберите тип приложений:
\r\n Запрещенные приложения — список приложений, об установке которых вы хотите получать оповещения. \r\n Утвержденные приложения — список приложений, которые утверждены для использования в вашей организации. Если пользователь устанавливает приложение, не входящее в этот список, вы получаете оповещение. \r\n ",
- "androidZebraMxZebraMx": "Настройте устройства Zebra, отправив профиль MX в формате XML.",
- "iosDeviceFeaturesAirprint": "Используйте эти параметры, чтобы настроить устройства iOS для автоматического подключения к AirPrint-совместимым принтерам в вашей сети. Для принтеров вам потребуется знать IP-адрес и путь ресурса.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Настройте расширение приложения, позволяющее использовать единый вход (SSO) для устройств под управлением iOS 13.0 или более поздних версий.",
- "iosDeviceFeaturesHomeScreenLayout": "Настройте макет для панели закрепления и начальных экранов на устройствах с iOS. На некоторых устройствах могут быть ограничения на количество отображаемых элементов.",
- "iosDeviceFeaturesIOSWallpaper": "Показ изображения на начальном экране и (или) экране блокировки устройств с iOS.\r\n Чтобы использовать разные изображения на этих двух экранах, создайте один профиль с изображением для экрана блокировки и другой — с изображением начального экрана.\r\n Затем назначьте оба профиля пользователям.\r\n \r\n
\r\n
Максимальный размер файла: 750 КБ
\r\n
Тип файла: PNG, JPG или JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Укажите параметры уведомлений для приложений. Поддерживает iOS 9.3 и более поздних версий.",
- "iosDeviceFeaturesSharedDevice": "Введите дополнительный текст, который будет отображаться на заблокированном экране. Поддерживается в iOS 9.3 и более поздних версиях. Дополнительные сведения",
- "iosGeneralApplicationRestrictions": "Используйте эти параметры, чтобы получать оповещения об установке приложений, запрещенных для использования в организации. Выберите тип приложений:
\r\n Запрещенные приложения — список приложений, об установке которых вы хотите получать оповещения. \r\n Утвержденные приложения — список приложений, которые утверждены для использования в вашей организации. Если пользователь устанавливает приложение, не входящее в этот список, вы получаете оповещение. \r\n ",
- "iosGeneralApplicationVisibility": "Используйте список отображаемых приложений, чтобы указать те приложения для iOS, которые пользователь может просматривать или запускать. Используйте список скрываемых приложений, чтобы указать приложения для iOS, которые пользователь не сможет просматривать или запускать.",
- "iosGeneralAutonomousSingleAppMode": "Приложения, которые вы добавляете в этот список и назначаете устройству, могут препятствовать запуску остальных приложений или блокировать устройство при выполнении определенного действия (например, прохождении теста). После завершения действия или удаления ограничения устройство возвращается в обычное состояние.",
- "iosGeneralKiosk": "Режим киоска блокирует различные параметры на устройстве или задает одно приложение, которое может работать на устройстве. Это может быть полезно в таких местах, как магазины, где на устройстве нужно запустить только одно демонстрационное приложение.",
- "macDeviceFeaturesAirprint": "Используйте эти параметры, чтобы настроить на устройствах с macOS автоматическое подключение к совместимым принтерам AirPrint в сети. Вам потребуется IP-адрес и путь к ресурсам принтеров.",
- "macDeviceFeaturesAssociatedDomains": "Настройка связанных доменов, позволяющих использовать общие данные и учетные данные для входа в приложениях и на веб-сайтах вашей организации. Этот профиль можно применять к устройствам под управлением macOS 10.15 или более поздних версий.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Настройте расширение приложения, позволяющее использовать единый вход (SSO) для устройств под управлением macOS 10.15 или более поздних версий.",
- "macDeviceFeaturesLoginItems": "Выберите, какие приложения, файлы и папки будут открываться при входе пользователей на устройства. Чтобы пользователи не могли изменять способ открытия выбранных приложений, вы можете скрыть эти приложения из пользовательских настроек.",
- "macDeviceFeaturesLoginWindow": "Настройка внешнего вида экрана входа macOS и функций, которые доступны пользователям после входа в систему.",
- "macExtensionsKernelExtensions": "Используйте эти параметры для настройки политики расширения ядра на устройствах под управлением macOS 10.13.2 или более поздних версий.",
- "macGeneralDomains": "Электронные адреса, по которым пользователь отправляет и получает почту и в которых не используются указанные здесь домены, будут помечены как ненадежные.",
- "windows10EndpointProtectionApplicationGuard": "При использовании Microsoft Edge компонент Application Guard в Microsoft Defender защищает вашу среду от сайтов, которые не были определены как доверенные вашей организацией. Когда пользователи переходят на сайты, не указанные в вашей границе изолированной сети, эти сайты открываются в виртуальном сеансе браузера в Hyper-V. Доверенные сайты определяются границей сети, которую можно настроить в разделе \"Конфигурация устройства\". Обратите внимание, что эта функция доступна только для устройств под управлением Windows 10 (64-разрядная версия) или более поздней версии.",
- "windows10EndpointProtectionCredentialGuard": "Включение Credential Guard затрагивает следующие обязательные параметры.\r\n \r\n
\r\n
Включить функции безопасности на основе виртуализации: включение виртуализации на основе безопасности (VBS) при следующей перезагрузке. Безопасность на основе виртуализации использует низкоуровневую оболочку Windows для поддержки устройств безопасности.
\r\n \r\n
Безопасная загрузка с прямым доступом к памяти: включение VBS с безопасной загрузкой и прямым доступом к памяти (DMA).
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Выберите другие приложения, для которых необходим аудит со стороны компонента управления приложениями в Microsoft Defender либо которые можно считать надежными для запуска с точки зрения этого компонента. Надежными для запуска автоматически считаются компоненты Windows и все приложения из Магазина Windows.
\r\n При запуске в режиме \"Только аудит\" приложения не блокируются. В режиме \"Только аудит\" все события записываются в локальные журналы клиентов.\r\n ",
- "windows10GeneralPrivacyPerApp": "Добавьте приложения, поведение конфиденциальности которых должно отличаться от заданного в разделе \"Конфиденциальность по умолчанию\".",
- "windows10NetworkBoundaryNetworkBoundary": "Граница сети представляет собой список корпоративных ресурсов, таких как облачный домен, и диапазонов IP-адресов для компьютеров в корпоративной сети. Определите границы сети, чтобы применять политики для защиты данных, находящихся в этих расположениях.",
- "windowsHealthMonitoring": "Настройте политику мониторинга работоспособности Windows.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone может заблокировать установку или запуск приложений из списка запрещенных приложений либо приложений, отсутствующих в утвержденном списке. Все управляемые приложения следует добавить в утвержденный список."
- },
- "Inputs": {
- "accountDomain": "Домен учетной записи",
- "accountDomainHint": "Например, contosodomain",
- "accountDomainInfoBalloon": "Укажите домен учетной записи пользователя.",
- "accountTypeInfoBalloon": "Укажите тип настраиваемой учетной записи на основе модели проверки подлинности",
- "allowContactSetting": "Разрешить пользователю изменять параметр контактов",
- "allowContactSyncInfoBalloon": "Укажите, разрешено ли пользователю изменять параметр синхронизации контактов",
- "allowUserChange": "Разрешить пользователю менять настройку",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Введите имя пакета, например com.microsoft.word",
- "androidUrlValidation": "Введите допустимый URL-адрес, подобный следующему: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en.",
- "appInstallContext": "Контекст установки приложения",
- "appUrlLabel": "URL-адрес Appstore",
- "appleUrlValidation": "Введите допустимый URL-адрес, аналогичный следующему: https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8.",
- "applicableDeviceType": "Применимый тип устройств",
- "assignmentActionLabel": "Режим",
- "authenticationMethodInfoBalloon": "Укажите способ проверки подлинности пользователя",
- "authenticationMetod": "Способ проверки подлинности",
- "authenticationType": "Тип проверки подлинности",
- "authenticationTypeInfoBalloon": "Укажите тип проверки подлинности пользователя",
- "availableLicenseCount": "Доступные лицензии",
- "basicAuth": "Обычная проверка подлинности",
- "biometricsInfoBalloon": "Для доступа пользователей к приложению на устройстве можно требовать биометрические данные, такие как TouchID или FaceID. Они запрашиваются в дополнение к методу проверки подлинности, выбранному в профиле. Не включайте эту функцию при наличии развернутых политик Защиты приложений Intune, так как они уже содержат требования доступа к управляемым данным. При использовании обеих функций будет возникать множество запросов на доступ к мобильному приложению Outlook. Если не настроить эту функцию, по умолчанию она будет для приложения отключена. ",
- "bookNameLabel": "Имя книги",
- "bundleDescriptionHint": "Введите описание, которое соответствует включаемым приложениям.",
- "calendar": "Календарь",
- "categoryLabel": "Категория",
- "categoryNameLabel": "Имя по умолчанию",
- "certProfileType": "Тип профиля сертификата",
- "certificate": "Сертификат",
- "certificates": "Сертификаты",
- "commandLineLabel": "Аргументы командной строки",
- "commandLineSizeHint": "Максимальная длина аргументов командной строки — 1024 символа.",
- "configurationSettingsFormatLabel": "Формат параметров конфигурации",
- "configurationSettingsLabel": "Формат параметров",
- "contactSync": "Сохранить контакты",
- "contactSyncInfoBalloon": "При сохранении контактов в собственную адресную книгу мобильного устройства новые звонки и SMS будут связываться с существующими пользовательскими контактами Outlook. Если не настроить эту функцию, по умолчанию она будет для приложения отключена.",
- "contacts": "Контакты",
- "createdDateTime": "Создано",
- "defaultCategoryHint": "Категории по умолчанию невозможно изменить",
- "deploySMimeCertsFromIntune": "Развертывание сертификатов S/MIME из Intune",
- "descriptionGenericLabel": "Описание",
- "descriptionHint": "Введите описание...",
- "descriptionLabel": "Описание",
- "descriptionSizeHint": "Описание не может быть длиннее 10 000 символов.",
- "developerLabel": "Разработчик",
- "developerSizeHint": "Максимальная длина имени разработчика — 256 символов.",
- "disable": "Отключить",
- "disabled": "Отключено",
- "displayNameLabel": "Имя",
- "displayVersionHint": "Введите версию проекта",
- "displayVersionLabel": "Версия приложения",
- "displayVersionLengthCheck": "Длина версии просмотра не должна превышать 130 символов",
- "eBookCategoryNameLabel": "Имя по умолчанию",
- "emailAccount": "Имя учетной записи электронной почты",
- "emailAccountHint": "например, корпоративная электронная почта",
- "emailAccountInfoBalloon": "Укажите отображамое имя учетной записи электронной почты, которое появится на устройствах пользователей",
- "emailAddressAttribute": "Атрибут адреса электронной почты из Microsoft Entra ID",
- "emailAddressInfoBalloon": "Укажите адрес электронной почты, который будет использоваться для отправки и получения почты",
- "emailServer": "Сервер электронной почты",
- "emailServerHint": "Пример: mail.contoso.com",
- "emailServerInfoBalloon": "Укажите имя узла Exchange Server",
- "enable": "Включить",
- "enableSMime": "Включить S/MIME",
- "enabled": "Включено",
- "encryptAllEmails": "Шифровать все электронные письма",
- "encryptionCertificates": "Сертификаты шифрования",
- "endUserNotifications": "Уведомления для конечных пользователей",
- "enrollmentTypeLabel": "Тип регистрации устройства",
- "externalRecipients": "MailTip внешних получателей",
- "externalRecipientsInfoBalloon": "Подсказка о внешних получателях отображается, если отправитель письма добавляет внешнего получателя либо группу рассылки, содержащую таких получателей. Она информирует отправителей о том, получит ли письмо кто-то за пределами организации, и помогает выбрать подходящие формулировки, тон и содержимое. Доступно только для учетных записей Exchange Online и локальных учетных записей с современной гибридной проверкой подлинности. Если не настроить эту функцию, по умолчанию она будет включена для приложения.",
- "focusedInbox": "Сортировка почты",
- "focusedInboxInfoBalloon": "Сортировка почты позволяет разделить папку \"Входящие\" на две вкладки: \"Отсортированные\" (где будут самые важные письма) и \"Прочее\" (куда попадает, чтобы не мешаться, все остальное). Если не настроить эту функцию, по умолчанию она будет для приложения включена. ",
- "fullScreenEnabledLabel": "Полноэкранный режим",
- "gmailNineAmountOfEmail": "Объем синхронизируемой электронной почты",
- "gmailNineAuthenticationMethodInfoBalloon": "Выберите способ проверки подлинности пользователей на сервере электронной почты. Наиболее безопасным и удобным способом для пользователей являются сертификаты. Проверка подлинности на основе сертификатов еще не доступна, так как недоступны профили сертификатов SCEP и PKCS для устройств владельца устройства. ",
- "gmailNineCertificateUPNInfoBalloon": "Сертификат должен содержать имя субъекта-пользователя (UPN) в качестве альтернативного имени субъекта.",
- "gmailNineEmailAddressInfoBalloon": "Атрибут, получаемый Intune из Microsoft Entra ID для динамического создания адреса электронной почты, который будет использоваться профилем, например MyName@contoso.com (имя субъекта-пользователя). Дополнительные сведения об атрибутах Microsoft Entra для профилей электронной почты.",
- "gmailNineEmailServerInfoBalloon": "Расположение Exchange (URL-адрес) сервера электронной почты, к которому указанное приложение подключается для получения электронной почты.",
- "gmailNineEmailSynchronizeInfoBalloon": "Контроль объема электронной почты, синхронизируемого клиентом.",
- "gmailNineSSLInfoBalloon": "Включите SSL, чтобы защитить связь с сервером электронной почты.",
- "gmailNineUsernameInfoBalloon": "Атрибут, получаемый Intune из Microsoft Entra ID для динамического создания имени пользователя, которое будет использоваться профилем, например MyName@contoso.com (имя субъекта-пользователя) или MyName (имя пользователя). Дополнительные сведения об атрибутах Microsoft Entra для профилей электронной почты.",
- "ignoreManifestScope": "Игнорировать область манифеста",
- "ignoreVersionDetection": "Игнорировать версию приложения",
- "informationUrlLabel": "URL-адрес сведений",
- "informationUrlSizeHint": "Максимальная длина URL-адреса информации — 1024 символа",
- "installAsManaged": "Установить как управляемое",
- "installationSourceLabel": "Тип приложения",
- "installerTypeInfoBalloon": "Тип установщика пакета приложения.",
- "installerTypeLabel": "Тип установщика",
- "isFeatured": "Отображение этого приложения как рекомендуемого в Корпоративном портале",
- "isMAMEnabledToggleLabel": "Да",
- "lastModifiedDateTime": "Время последнего обновления",
- "ldapUrl": "URL-адрес LDAP",
- "licensingType": "Поддерживает назначение контекста устройства",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Минимальная версия операционной системы",
- "modernAuth": "Современная проверка подлинности",
- "nameHint": "Введите имя",
- "nameLabel": "Имя",
- "nameSizeHint": "Максимальная длина имени — 512 символов.",
- "notConfigured": "Не настроено",
- "notesLabel": "Заметки",
- "notesSizeHint": "Максимальная длина текста заметок — 1024 символа.",
- "notificationType": "Тип уведомления",
- "oneDay": "Один день",
- "oneMonth": "Один месяц",
- "oneWeek": "Одна неделя",
- "outlookSMimeSettings": "Параметры S/MIME Outlook",
- "ownerLabel": "имя владельца;",
- "ownerSizeHint": "Максимальная длина имени владельца — 256 символов.",
- "packageIdLabel": "Идентификатор пакета",
- "packageNameLabel": "Имя пакета",
- "pivCredentialNotConfigured": "Вы не выбрали издателя производных учетных данных для своего клиента. Это необходимо сделать для успешного применения политики к устройствам.",
- "platformLabel": "Платформа",
- "policyDescriptionLabel": "Описание",
- "policyNameLabel": "Имя",
- "preComposedIconEnabled": "Предварительная компиляция",
- "primarySMTPAddress": "Первичный SMTP-адрес",
- "privacyUrlLabel": "URL-адрес политики конфиденциальности",
- "publisherHint": "Введите имя издателя",
- "publisherLabel": "Издатель",
- "publisherSizeHint": "Длина имени издателя должна составлять от 2 до 1024 символов (включительно)",
- "require": "Требовать",
- "requireBiometrics": "Требовать биометрию для доступа к приложению",
- "sAMAccountName": "SamAccountName",
- "scopeTagsRequired": "Требуется как минимум один тег области.",
- "searchAppLabel": "Выбрать приложение",
- "searchAppLinkText": "Поиск в App Store",
- "searchWinGetPublicRepositoryLinkText": "Поиск в репозитории сообщества диспетчера пакетов Windows",
- "searchWinGetStoreRepositoryLinkText": "Поиск в приложении Microsoft Store (новое)",
- "selectAAD": "Выберите атрибут Microsoft Entra",
- "selectAppFileLabel": "Выбрать файл",
- "selectAppFileLinkText": "Выберите файл пакета приложения",
- "selectAppFileToUpdateLabel": "Выберите файл для обновления",
- "selectAuthMethod": "Выбрать способ проверки подлинности",
- "selectAuthType": "Выберите тип проверки подлинности",
- "selectCatalogAppLabel": "Выбрать приложение",
- "selectCatalogAppLinkText": "Поиск в каталоге корпоративных приложений",
- "selectCertificate": "Выберите сертификат",
- "signAllEmails": "Подписать все электронные письма",
- "signingCertificates": "Сертификаты подписи",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Описание набора",
- "suiteNameLabel": "Имя набора",
- "targetApplicationBundleIdentifier": "Идентификатор набора конечных приложений",
- "targetedPlatformsLabel": "Целевая платформа",
- "tasks": "Задачи",
- "threeDays": "Три дня",
- "totalLicenseCount": "Всего лицензий",
- "twoWeeks": "Две недели",
- "unifiedAssignmentsLabel": "Кому назначить:",
- "unlimited": "Без ограничений",
- "urlHint": "Укажите допустимый URL-адрес.",
- "useManagedBrowserHint": "Только для Android и iOS. Подробнее...",
- "useManagedBrowserLabel": "Требовать Managed Browser, чтобы открыть эту ссылку",
- "userPrinicipalName": "Имя субъекта-пользователя",
- "username": "Имя пользователя",
- "usernameAttribute": "Атрибут имени пользователя из Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Укажите имя субъекта-пользователя для профиля электронной почты, который будет использоваться для проверки подлинности учетной записи",
- "usernamePassword": "Имя пользователя и пароль",
- "webAppUrlHint": "Введите допустимый URL-адрес, начинающийся с http:// или https://",
- "webAppUrlLabel": "URL-адрес приложения",
- "webAppUrlSizeHint": "Максимальная длина URL-адреса приложения составляет 1024 символа",
- "windowsUrlValidation": "Введите допустимый URL-адрес, аналогичный следующему: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm.",
- "xMLDataEntered": "Введенные данные XML",
- "xmlFormatInvalid": "Формат политики XML недопустим.",
- "xmlTooLarge": "Размер входных данных должен быть менее 1 МБ."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Не удалось удалить {0}",
- "failureCa": "Не удалось удалить {0}, так как на него ссылаются политики центра сертификации",
- "modifying": "Выполняется удаление {0}",
- "success": "{0} удалено"
- },
- "Notify": {
- "failure": "Не удалось обновить {0}",
- "modifying": "Изменение: {0}.",
- "success": "Изменено: {0}."
- },
- "menuLabel": "Контекст проверки подлинности"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Дополнительные сведения о требованиях к методам проверки подлинности, которым должны удовлетворять поставщики федерации.",
- "certificate": "Проверка подлинности на основе сертификата",
- "infoBubble": "Укажите нужный способ проверки подлинности, который должен предоставлять поставщик федерации, например ADFS.",
- "multifactor": "Многофакторная проверка подлинности",
- "require": "Требовать федеративный метод проверки подлинности (предварительная версия)",
- "whatIfFormat": "{0} — {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Политика постоянного сеанса браузера работает правильно только при выборе варианта \"Все облачные приложения\". Обновите конфигурацию облачных приложений."
- },
- "Option": {
- "always": "Всегда постоянный",
- "help": "Постоянный сеанс в браузере означает, что пользователям не требуется снова выполнять вход после закрытия и повторного открытия окна браузера. \n
\n
Этот параметр работает правильно при выборе варианта \"Все облачные приложения\".
\n
Он не влияет на время жизни маркеров или настройку периодичности входа.
\n
Этот параметр приводит к переопределению политики \"Показать возможность не выходить из системы\" в фирменном оформлении компании.
\n
\"Запретить постоянный\" переопределяет любые утверждения постоянного единого входа, переданные из федеративных служб проверки подлинности.
\n
\"Запретить постоянный\" блокирует единый вход на мобильных устройствах в приложениях и между приложениями и мобильным браузером пользователя.
\n",
- "label": "Сохраняемый сеанс браузера",
- "never": "Запретить постоянный"
- },
- "Warning": {
- "allApps": "Постоянный сеанс браузера работает правильно только при выборе варианта \"Все облачные приложения\". Измените конфигурацию облачных приложений. Щелкните здесь для получения дополнительных сведений."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Часы или дни",
- "value": "Периодичность"
- },
- "Option": {
- "Day": {
- "plural": "{0} дн.",
- "singular": "1 день"
- },
- "Hour": {
- "plural": "{0} ч",
- "singular": "1 час"
- },
- "daysOption": "Дни",
- "everytime": "Каждый раз",
- "help": "Период времени, по истечении которого пользователю будет предложено повторить вход при попытке доступа к ресурсу. Значение по умолчанию — скользящий интервал 90 дней, т. е. пользователю будет предложено повторно пройти проверку подлинности при первой попытке доступа к ресурсу после периода отсутствия активности в течение не менее 90 дней.",
- "hoursOption": "Часы",
- "label": "Частота входа",
- "placeholder": "Выбрать единицы отображения"
- }
- },
- "mainOption": "Изменить время существования сеанса",
- "mainOptionHelp": "Настройте частоту получения запросов пользователями и сохранение сеанса браузера. Приложения, которые не поддерживают современные протоколы проверки подлинности, могут не учитывать эти политики. В этом случае обратитесь к разработчику приложения."
- },
- "SingleSelectorActive": {
- "failed": "Не удалось загрузить эти данные.",
- "reattempt": "Загрузка данных. Повторная попытка: {0} из {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Выбор ролей каталога"
- },
- "Excluded": {
- "gridAria": "Список исключенных пользователей"
- },
- "Included": {
- "gridAria": "Список включенных пользователей"
- },
- "Validation": {
- "customRoleIncluded": "\"Роли каталога\" включают как минимум одну настраиваемую роль.",
- "customRoleSelected": "Выбрана как минимум одна настраиваемая роль.",
- "failed": "Необходимо настроить \"{0}\"",
- "roles": "Выберите по меньшей мере одну роль",
- "usersGroups": "Выберите по меньшей мере одного пользователя или одну группу"
- },
- "learnMore": "Управляйте доступом в зависимости от того, к кому будет применяться политика, например к пользователям и группам, удостоверениям рабочей нагрузки, ролям каталогов или внешним гостям."
- },
- "advancedTabText": "Дополнительно",
- "allCloudAppsErrorBox": "Если выбрано предоставление разрешения \"Требовать изменения пароля\", необходимо выбрать \"Все облачные приложения\".",
- "allCloudAppsReauth": "Если выбран элемент управления сеансом \"Частота входа (каждый раз)\" и условие \"Риск входа\", необходимо выбрать \"Все облачные приложения\"",
- "allCloudOrSpecificApps": "Для элемента управления сеансом \"Частота входа (каждый раз)\" требуется выбрать \"Все облачные приложения\" или специально поддерживаемые приложения",
- "allDayCheckboxLabel": "Весь день",
- "allDevicePlatforms": "Любое устройство",
- "allGuestUserInfoContent": "Включает гостей Microsoft Entra B2B, но не включает гостей SharePoint B2B",
- "allGuestUserLabel": "Все гости и внешние пользователи",
- "allRiskLevelsOption": "Все уровни рисков",
- "allTrustedLocationLabel": "Все надежные расположения",
- "allUserGroupSetSelectorLabel": "Все выбранные пользователи и группы",
- "allUsersReauth": "Для элемента управления сеансом \"Частота входа (каждый раз)\" требуется выбрать \"Все пользователи\"",
- "allUsersString": "Все пользователи",
- "and": "{0} И {1} ",
- "andWithGrouping": "({0}) и {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Любое приложение облака",
- "appContextOptionInfoContent": "Тег запрошенной проверки подлинности",
- "appContextOptionLabel": "Запрошенный тег проверки подлинности (предварительная версия)",
- "appContextUriPlaceholder": "Пример: uri:contoso.com:level3",
- "appEnforceInfoBubble": "Ограничения, применяемые приложением, могут требовать дополнительной настройки администратором в случае облачных приложений. Ограничения будут действовать только для новых сеансов.",
- "appNotSetSeletorLabel": "Выбрано 0 облачных приложений",
- "appReauthNotSupported": "Это приложение не поддерживает элемент управления сеансом \"Частота входа (каждый раз)\".",
- "applyConditionClientAppInfoBalloonContent": "Настроить применение политики к определенным клиентским приложениям",
- "applyConditionDevicePlatformInfoBalloonContent": "Настроить применение политики к определенным платформам устройств",
- "applyConditionDeviceStateInfoBalloonContent": "Настроить применение политики к определенным состояниям устройств",
- "applyConditionLocationInfoBalloonContent": "Настроить применение политики к надежным и ненадежным расположениям",
- "applyConditionSigninRiskInfoBalloonContent": "Настроить применение политики к выбранным уровням риска для входа",
- "applyConditionUserRiskInfoBalloonContent": "Настройте применение политики для выбранных уровней пользовательского риска",
- "applyConditonLabel": "Настроить",
- "ariaLabelPolicyDisabled": "Политика отключена",
- "ariaLabelPolicyEnabled": "Политика включена",
- "ariaLabelPolicyReportOnly": "Политика находится в режиме \"Только отчет\"",
- "blockAccess": "Блокировка доступа",
- "builtInDirectoryRoleLabel": "Встроенные роли каталога",
- "casCustomControlInfo": "Необходимо настроить пользовательские политики на портале Cloud App Security. Этот элемент управления сразу же работает для популярных приложений, и его можно подключить к любому приложению. Щелкните здесь, чтобы получить дополнительные сведения о каждом из этих сценариев.",
- "casInfoBubble": "Этот элемент управления можно использовать в разных облачных приложениях.",
- "casPreconfiguredControlInfo": "Этот элемент управления сразу же работает для популярных приложений, и его можно подключить к любому приложению. Щелкните здесь, чтобы получить дополнительные сведения о каждом из этих сценариев.",
- "cert64DownloadCol": "Скачать сертификат Base64",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Скачать сертификат",
- "certDurationCol": "Срок действия",
- "certDurationStartCol": "Действителен с",
- "certName": "VpnCert",
- "certainApps": "Параметр \"Частота попыток входа: каждый раз\" используется лишь определенными приложениями, если не выбраны параметры \"Требовать многофакторную проверку подлинности\" и \"Требовать смену пароля\"",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Выбор приложений",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Выбранные приложения",
- "chooseApplicationsEmpty": "Нет приложений",
- "chooseApplicationsNone": "Нет",
- "chooseApplicationsNoneFound": "Не удалось найти \"{0}\". Попробуйте использовать другое имя или идентификатор.",
- "chooseApplicationsPlural": "{0} и еще {1}",
- "chooseApplicationsReAuthEverytimeInfo": "Ищете приложение? Некоторые приложения нельзя использовать с элементом управления сеанса \"Каждый раз требовать повторной проверки подлинности\"",
- "chooseApplicationsRemove": "Удалить",
- "chooseApplicationsReturnedPlural": "Найдено приложений: {0}.",
- "chooseApplicationsReturnedSingular": "Найдено одно приложение.",
- "chooseApplicationsSearchBalloon": "Поиск приложения по имени или идентификатору.",
- "chooseApplicationsSearchHint": "Поиск приложений...",
- "chooseApplicationsSearchLabel": "Приложения",
- "chooseApplicationsSearching": "Идет поиск...",
- "chooseApplicationsSelect": "Выбрать",
- "chooseApplicationsSelected": "Выбрано",
- "chooseApplicationsSingular": "{0} и еще 1",
- "chooseApplicationsTooMany": "Результатов больше, чем может быть отображено. Выполните фильтрацию при помощи поля поиска.",
- "chooseLocationCorpnetItem": "Корпоративная сеть",
- "chooseLocationSelectedLocationsLabel": "Выбранные расположения",
- "chooseLocationTrustedIpsItem": "Доверенные IP-адреса многофакторной проверки подлинности",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Выбор расположений",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Выбранные расположения",
- "chooseLocationsEmpty": "Расположений нет",
- "chooseLocationsExcludedSelectorTitle": "Выбрать",
- "chooseLocationsIncludedSelectorTitle": "Выбрать",
- "chooseLocationsNone": "Нет",
- "chooseLocationsNoneFound": "Не удалось найти \"{0}\". Попробуйте использовать другое имя или идентификатор.",
- "chooseLocationsPlural": "{0} и еще {1}",
- "chooseLocationsRemove": "Удалить",
- "chooseLocationsReturnedPlural": "Найдено расположений: {0}",
- "chooseLocationsReturnedSingular": "Найдено одно расположение.",
- "chooseLocationsSearchBalloon": "Поиск расположения по имени.",
- "chooseLocationsSearchHint": "Поиск расположений...",
- "chooseLocationsSearchLabel": "Расположение",
- "chooseLocationsSearching": "Идет поиск...",
- "chooseLocationsSelect": "Выбрать",
- "chooseLocationsSelected": "Выбрано",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Выбрать",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Выбрать",
- "chooseLocationsSingular": "{0} и еще 1",
- "chooseLocationsTooMany": "Результатов больше, чем может быть отображено. Выполните фильтрацию при помощи поля поиска.",
- "claimProviderAddCommandText": "Новый настраиваемый элемент управления",
- "claimProviderAddNewBladeTitle": "Новый настраиваемый элемент управления",
- "claimProviderDeleteCommand": "Удалить",
- "claimProviderDeleteDescription": "Вы действительно хотите удалить сеть \"{0}\"? Это действие невозможно отменить.",
- "claimProviderDeleteTitle": "Вы уверены?",
- "claimProviderEditInfoText": "Введите JSON для настраиваемых элементов управления, предоставленных поставщиками утверждений.",
- "claimProviderNotificationCreateDescription": "Создается настраиваемый элемент управления \"{0}\"",
- "claimProviderNotificationCreateFailedDescription": "Произошел сбой при создании настраиваемого элемента управления \"{0}\". Повторите попытку позже.",
- "claimProviderNotificationCreateFailedTitle": "Не удалось создать настраиваемый элемент управления",
- "claimProviderNotificationCreateSuccessDescription": "Создан настраиваемый элемент управления \"{0}\"",
- "claimProviderNotificationCreateSuccessTitle": "Создана сеть \"{0}\"",
- "claimProviderNotificationCreateTitle": "Идет создание сети \"{0}\"",
- "claimProviderNotificationDeleteDescription": "Удаляется настраиваемый элемент управления \"{0}\"",
- "claimProviderNotificationDeleteFailedDescription": "Произошел сбой при удалении настраиваемого элемента управления \"{0}\". Повторите попытку позже.",
- "claimProviderNotificationDeleteFailedTitle": "Не удалось удалить настраиваемый элемент управления",
- "claimProviderNotificationDeleteSuccessDescription": "Удален настраиваемый элемент управления \"{0}\"",
- "claimProviderNotificationDeleteSuccessTitle": "Сеть \"{0}\" удалена.",
- "claimProviderNotificationDeleteTitle": "Идет удаление \"{0}\"",
- "claimProviderNotificationUpdateDescription": "Обновляется настраиваемый элемент управления \"{0}\"",
- "claimProviderNotificationUpdateFailedDescription": "Произошел сбой при обновлении настраиваемого элемента управления \"{0}\". Повторите попытку позже.",
- "claimProviderNotificationUpdateFailedTitle": "Не удалось обновить настраиваемый элемент управления",
- "claimProviderNotificationUpdateSuccessDescription": "Обновлен настраиваемый элемент управления \"{0}\"",
- "claimProviderNotificationUpdateSuccessTitle": "Сеть \"{0}\" изменена.",
- "claimProviderNotificationUpdateTitle": "Идет обновление сети \"{0}\".",
- "claimProviderValidationAppIdInvalid": "Значение \"AppId\" недопустимо. Проверьте и повторите попытку.",
- "claimProviderValidationClientIdMissing": "В данных отсутствует значение \"ClientId\". Проверьте и повторите попытку.",
- "claimProviderValidationControlClaimsRequestedMissing": "В \"Control\" отсутствует значение \"ClaimsRequested\". Проверьте и повторите попытку.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "В элементе \"ClaimsRequested\" отсутствует значение \"Type\". Проверьте и повторите попытку.",
- "claimProviderValidationControlIdAlreadyExists": "Значение \"Id\" для \"Control\" уже существует. Проверьте и повторите попытку.",
- "claimProviderValidationControlIdMissing": "В \"Control\" отсутствует значение \"Id\". Проверьте и повторите попытку.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "Значение \"Id\" для \"Control\" невозможно удалить, так как на него ссылается существующая политика. Сначала удалите его из политики.",
- "claimProviderValidationControlIdTooManyControls": "Свойство \"Control\" содержит слишком много элементов управления. Проверьте его и повторите попытку.",
- "claimProviderValidationControlIdValueReserved": "Значение \"Id\" для \"Control\" является зарезервированным ключевым словом; используйте другой идентификатор.",
- "claimProviderValidationControlNameAlreadyExists": "Значение \"Name\" для \"Control\" уже существует. Проверьте и повторите попытку.",
- "claimProviderValidationControlNameMissing": "В \"Control\" отсутствует значение \"Name\". Проверьте и повторите попытку.",
- "claimProviderValidationControlsMissing": "В данных отсутствует значение \"Controls\". Проверьте и повторите попытку.",
- "claimProviderValidationDiscoveryUrlMissing": "В данных отсутствует значение \"DiscoveryUrl\". Проверьте и повторите попытку.",
- "claimProviderValidationInvalid": "Предоставленные данные недопустимы. Проверьте и повторите попытку.",
- "claimProviderValidationInvalidJsonDefinition": "Не удалось сохранить настраиваемый элемент управления. Проверьте текст JSON и повторите попытку.",
- "claimProviderValidationNameAlreadyExists": "Значение \"Name\" уже существует. Проверьте и повторите попытку.",
- "claimProviderValidationNameMissing": "В данных отсутствует значение \"Name\". Проверьте и повторите попытку.",
- "claimProviderValidationUnknown": "Произошла неизвестная ошибка при проверке предоставленных данных. Проверьте и повторите попытку.",
- "claimProvidersNone": "Нет настраиваемых элементов управления",
- "claimProvidersSearchPlaceholder": "Поиск элементов управления.",
- "classicPoilcyFilterTitle": "Показать",
- "classicPolicyAllPlatforms": "Все платформы",
- "classicPolicyClientAppBrowserAndNative": "Браузер, мобильные приложения и клиенты для настольных ПК",
- "classicPolicyCloudAppTitle": "Облачное приложение",
- "classicPolicyControlAllow": "Разрешить",
- "classicPolicyControlBlock": "Заблокировать",
- "classicPolicyControlBlockWhenNotAtWork": "Блокировать доступ, если не на работе",
- "classicPolicyControlRequireCompliantDevice": "Требовать соответствующее устройство",
- "classicPolicyControlRequireDomainJoinedDevice": "Требуется устройство, присоединенное к домену",
- "classicPolicyControlRequireMfa": "Требовать многофакторную проверку подлинности",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Требовать многофакторную проверку подлинности вне работы",
- "classicPolicyDeleteCommand": "Удалить",
- "classicPolicyDeleteFailTitle": "Не удалось удалить классическую политику",
- "classicPolicyDeleteInProgressTitle": "Удаление классической политики",
- "classicPolicyDeleteSuccessTitle": "Классическая политика удалена",
- "classicPolicyDetailBladeTitle": "Подробности",
- "classicPolicyDisableCommand": "Отключить",
- "classicPolicyDisableConfirmation": "Действительно отключить \"{0}\"? Это действие невозможно отменить.",
- "classicPolicyDisableFailDescription": "Не удалось отключить политику \"{0}\"",
- "classicPolicyDisableFailTitle": "Не удалось отключить классическую политику",
- "classicPolicyDisableInProgressDescription": "Отключение политики \"{0}\"",
- "classicPolicyDisableInProgressTitle": "Отключение классической политики",
- "classicPolicyDisableSuccessDescription": "Политика \"{0}\" отключена",
- "classicPolicyDisableSuccessTitle": "Классическая политика отключена",
- "classicPolicyEasSupportedPlatforms": "Поддерживаемые платформы Exchange ActiveSync",
- "classicPolicyEasUnsupportedPlatforms": "Неподдерживаемые платформы Exchange ActiveSync",
- "classicPolicyExcludedPlatformsTitle": "Исключенные платформы устройств",
- "classicPolicyFilterAll": "Все политики",
- "classicPolicyFilterDisabled": "Отключенные политики",
- "classicPolicyFilterEnabled": "Включенные политики",
- "classicPolicyIncludeExcludeMembersDescription": "Исключая группы, вы можете выполнить поэтапный перенос политик.",
- "classicPolicyIncludeExcludeMembersTitle": "Включение и исключение групп",
- "classicPolicyIncludedPlatformsTitle": "Включенные платформы устройств",
- "classicPolicyManualMigrationMessage": "Эту политику необходимо перенести вручную.",
- "classicPolicyMigrateCommand": "Перенос",
- "classicPolicyMigrateConfirmation": "Действительно выполнить миграцию \"{0}\"? Эту политику можно перенести только один раз.",
- "classicPolicyMigrateFailDescription": "Не удалось перенести \"{0}\"",
- "classicPolicyMigrateFailTitle": "Не удалось перенести классическую политику",
- "classicPolicyMigrateInProgressDescription": "Миграция \"{0}\"...",
- "classicPolicyMigrateInProgressTitle": "Перенос классической политики",
- "classicPolicyMigrateRecommendText": "Рекомендация: перейдите на новые политики портала Azure.",
- "classicPolicyMigrateSuccessTitle": "Классическая политика перенесена",
- "classicPolicyMigratedSuccessDescription": "Теперь этой классической политикой можно управлять в разделе \"Политики\".",
- "classicPolicyMigratedSuccessDescriptionMultiple": "Эта классическая политика переносится в виде нескольких новых политик ({0}). Новыми политиками можно управлять в разделе \"Политики\".",
- "classicPolicyNoEditPermissionMsg": "У вас нет разрешения на изменение этой политики. Только глобальные администраторы и администраторы безопасности могут изменять политику. Щелкните здесь, чтобы получить дополнительные сведения.",
- "classicPolicySaveFailDescription": "Не удалось сохранить политику \"{0}\"",
- "classicPolicySaveFailTitle": "Не удалось сохранить классическую политику",
- "classicPolicySaveInProgressDescription": "Сохранение политики \"{0}\"",
- "classicPolicySaveInProgressTitle": "Сохранение классической политики",
- "classicPolicySaveSuccessDescription": "Политика \"{0}\" сохранена",
- "classicPolicySaveSuccessTitle": "Классическая политика сохранена",
- "clientAppBladeLegacyInfoBanner": "Устаревший способ проверки подлинности сейчас не поддерживается.",
- "clientAppBladeLegacyUpsellBanner": "Блокировка неподдерживаемых клиентских приложений (предварительная версия)",
- "clientAppBladeTitle": "Клиентские приложения",
- "clientAppDescription": "Выберите клиентские приложения, на которые будет распространяться эта политика.",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync сейчас не поддерживает все остальные условия.",
- "clientAppLearnMore": "Управляйте доступом пользователей к определенным клиентским приложениям, не использующим современную проверку подлинности.",
- "clientAppLegacyHeader": "Клиенты с устаревшими версиями проверки подлинности",
- "clientAppMobileDesktop": "Мобильные приложения и настольные клиенты",
- "clientAppModernHeader": "Клиенты с современной проверкой подлинности",
- "clientAppOnlySupportedPlatforms": "Применить политику только к поддерживаемым платформам",
- "clientAppSelectSpecificClientApps": "Выбрать клиентские приложения",
- "clientAppWebBrowser": "Браузер",
- "clientAppsSelectedLabel": "Включено: {0}",
- "clientTypeBrowser": "Браузер",
- "clientTypeEas": "Клиенты Exchange ActiveSync",
- "clientTypeEasInfo": "Клиенты Exchange ActiveSync, использующие только устаревшую проверку подлинности.",
- "clientTypeModernAuth": "Клиенты с современной проверкой подлинности",
- "clientTypeOtherClients": "Другие клиенты",
- "clientTypeOtherClientsInfo": "Сюда входят старые офисные клиенты и другие протоколы электронной почты (POP, IMAP, SMTP и т. д.). [Дополнительные сведения][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "Из каталога удалены облачные приложения ({0}), настроенные в этой политике, но это не затронет другие ее приложения. Удаление из политики произойдет автоматически при следующем изменении ее раздела приложений.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Все приложения Майкрософт",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Разрешить облачные, классические и мобильные приложения Майкрософт (предварительная версия)",
- "cloudappsSelectionBladeAllCloudapps": "Все облачные приложения",
- "cloudappsSelectionBladeExcludeDescription": "Выбор облачных приложений, которые будут исключены из политики.",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Выбрать исключенные облачные приложения",
- "cloudappsSelectionBladeIncludeDescription": "Выбрать облачные приложения, к которым будет применяться эта политика",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Выбрать",
- "cloudappsSelectionBladeSelectedCloudapps": "Выбрать приложения",
- "cloudappsSelectorInfoBallonText": "Службы, которые пользователь использует для работы. Например, Salesforce.",
- "cloudappsSelectorPluralExcluded": "Исключено приложений: {0}",
- "cloudappsSelectorPluralIncluded": "Включено приложений: {0}",
- "cloudappsSelectorSingularExcluded": "Исключено 1 приложение",
- "cloudappsSelectorSingularIncluded": "Включено 1 приложение",
- "cloudappsSelectorUserPlural": "Приложений: {0}",
- "cloudappsSelectorUserSingular": "1 приложение",
- "conditionLabelMulti": "Выбрано условий: {0}",
- "conditionLabelOne": "1 условие выбрано",
- "conditionalAccessBladeTitle": "Условный доступ",
- "conditionsNotSelectedLabel": "Не настроено",
- "conditionsReqMfaReauthSet": "Некоторые параметры недоступны, поскольку сейчас выбран параметры \"Требовать многофакторную проверку подлинности\" и элемент управления сеансом \"Частота попыток входа: каждый раз\"",
- "conditionsReqPwSet": "Некоторые варианты недоступны, так как сейчас выбрано предоставление разрешения \"Требовать изменения пароля\".",
- "configureCasText": "Настроить Cloud App Security",
- "configureCustomControlsText": "Настроить пользовательскую политику",
- "controlLabelMulti": "Выбрано элементов управления: {0}",
- "controlLabelOne": "1 элемент управления выбран",
- "controlValidatorText": "Выберите по меньшей мере один элемент управления",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Дополнительные сведения о требовании совместимых устройств.",
- "controlsDeviceComplianceInfoBubble": "Устройство должно соответствовать политике Intune. Если устройство не соответствует ей, пользователя попросят привести его в соответствие с требованиями.",
- "controlsDomainJoinedAriaLabel": "Подробнее о требовании устройства с гибридным присоединением к Microsoft Entra.",
- "controlsDomainJoinedInfoBubble": "Устройства должны иметь гибридное присоединение к Microsoft Entra.",
- "controlsMamAriaLabel": "Дополнительные сведения об обязательном использовании утвержденных клиентских приложений.",
- "controlsMamInfoBubble": "Устройство должно использовать следующие утвержденные клиентские приложения.",
- "controlsMfaInfoBubble": "Пользователь должен выполнить дополнительные требования безопасности, такие как телефонный звонок, SMS.",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Дополнительные сведения о требовании приложений, защищенных политикой.",
- "controlsRequireCompliantAppInfoBubble": "На устройстве следует использовать приложения, защищенные политикой.",
- "controlsRequirePasswordResetAriaLabel": "Дополнительные сведения о необходимости смены пароля.",
- "controlsRequirePasswordResetInfoBubble": "Требовать изменить пароль, чтобы снизить риск пользователя. Для этого также требуется многофакторная проверка подлинности. Невозможно использовать другие элементы управления.",
- "countriesRadiobuttonInfoBalloonContent": "Страна или регион, откуда выполняется вход, определяются по IP-адресу пользователя.",
- "createNewVpnCert": "Новый сертификат",
- "createdTimeLabel": "Время создания",
- "customRoleLabel": "Настраиваемые роли (не поддерживаются)",
- "dateRangeTypeLabel": "Диапазон дат",
- "daysOfWeekPlaceholderText": "Фильтр по дням недели",
- "daysOfWeekTypeLabel": "Дни недели",
- "deletePolicyNoLicenseText": "Теперь вы можете удалить эту политику. После удаления вы не сможете создать ее повторно, если у вас нет необходимых лицензий.",
- "descriptionContentForControlsAndOr": "Для нескольких элементов управления",
- "devicePlatform": "Платформа устройства",
- "devicePlatformConditionHelpDescription": "Применение политики к выбранным платформам устройств.\n[Дополнительные сведения][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "Включено: {0}",
- "devicePlatformIncludeExclude": "Исключены: {0} и {1}",
- "devicePlatformNoSelectionError": "Для выбора платформ устройств требуется выбрать один вложенный элемент.",
- "devicePlatformsNone": "Нет",
- "deviceSelectionBladeExcludeDescription": "Выбор платформ, которые будут исключены из политики.",
- "deviceSelectionBladeIncludeDescription": "Выбрать платформы устройств, включаемые в эту политику",
- "deviceStateAll": "Все состояния устройств",
- "deviceStateCompliant": "Устройство, отмеченное как соответствующее требованиям",
- "deviceStateCompliantInfoContent": "Устройства, совместимые с Intune, будут исключены из оценки этой политики, поэтому, например, если политика блокирует доступ, она заблокирует все устройства, кроме совместимых с Intune.",
- "deviceStateConditionConfigureInfoContent": "Настроить политику на основе состояния устройства",
- "deviceStateConditionSelectorInfoContent": "Обозначает состояние устройства, с которого входит пользователь: с гибридным присоединением к Microsoft Entra или помечено как соответствующее требованиям.\n Этот параметр больше не рекомендуется к использованию. Используйте вместо него \"{1}\".",
- "deviceStateConditionSelectorLabel": "Состояние устройства (не рекомендуется)",
- "deviceStateDomainJoined": "Устройство с гибридным присоединением к Microsoft Entra",
- "deviceStateDomainJoinedInfoContent": "Устройства с гибридным присоединением к Microsoft Entra не будут проверяться на соответствие этой политике. Например, если политика блокирует доступ, она будет делать это для всех устройств, кроме устройств с гибридным присоединением к Microsoft Entra.",
- "deviceStateDomainJoinedInfoLinkText": "Дополнительные сведения.",
- "deviceStateExcludeDescription": "Выберите условие состояния устройства, используемое для исключения устройств из политики.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} и исключить {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} и исключить {1}, {2}",
- "directoryRoleInfoContent": "Назначьте политику для встроенных ролей каталога.",
- "directoryRolesLabel": "Роли каталога",
- "discardbutton": "Отменить",
- "downloadDefaultFileName": "Диапазоны IP-адресов",
- "downloadExampleFileName": "Пример",
- "downloadExampleHeader": "Это пример файла, в котором демонстрируются типы данных, которые могут быть приняты. Строки, начинающиеся с символа #, будут пропущены.",
- "duplicate": "Дублировать",
- "duplicatePolicyName": "КОПИРОВАТЬ {0}",
- "endDatePickerLabel": "Элементы",
- "endTimePickerLabel": "Время окончания",
- "enterCountryText": "IP-адрес и страна или регион проверяются в паре. Выберите страну или регион.",
- "enterIpText": "IP-адрес и страна или регион проверяются в паре. Введите IP-адрес.",
- "enterUserText": "Нет выбранных пользователей. Выберите пользователя.",
- "evaluationResult": "Результат вычисления",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Только Exchange ActiveSync с поддерживаемыми платформами",
- "excludeAllTrustedLocationSelectorText": "все надежные расположения",
- "featureRequiresP2": "Для этой функции требуется лицензия Microsoft Entra ID P2.",
- "friday": "Пятница",
- "grantControls": "Предоставить управление",
- "gridNetworkTrusted": "Надежный",
- "gridPolicyCreatedDateTime": "Дата создания",
- "gridPolicyEnabled": "Включено",
- "gridPolicyModifiedDateTime": "Дата изменения",
- "gridPolicyName": "Имя политики",
- "gridPolicyState": "Состояние",
- "groupSelectionBladeExcludeDescription": "Выбор групп, которые будут исключены из политики",
- "groupSelectionBladeExcludedSelectorTitle": "Выбор исключенных групп",
- "groupSelectionBladeSelect": "Выбор групп",
- "groupSelectorInfoBallonText": "Группы в каталоге, к которому применяется политика. Например, \"пилотная группа\"",
- "groupsSelectionBladeTitle": "Группы",
- "helpCommonScenariosText": "Хотите узнать о распространенных ситуациях?",
- "helpCondition1": "Когда любой пользователь вне сети компании",
- "helpCondition2": "Когда пользователи в группе \"Менеджеры\" входят",
- "helpConditionsTitle": "Условия",
- "helpControl1": "При входе им требуется пройти многофакторную проверку подлинности",
- "helpControl2": "Они должны использовать устройство, присоединенное к домену и соответствующее требованиям Intune.",
- "helpControlsTitle": "Элементы управления",
- "helpIntroText": "Условный доступ позволяет требовать соблюдение определенных условий в отношении доступа, когда удовлетворяется определенный критерий. Приведем несколько примеров.",
- "helpIntroTitle": "Что представляет собой условный доступ?",
- "helpLearnMoreText": "Хотите узнать больше об условном доступе?",
- "helpStartStep1": "Создайте первую политику, щелкнув \"+ Новая политика\"",
- "helpStartStep2": "Укажите условия и механизмы контроля для политики",
- "helpStartStep3": "Когда все сделаете, не забудьте включить политику и создать",
- "helpStartTitle": "Начало работы",
- "highRisk": "Высокая",
- "includeAndExcludeAppsTextFormat": "Включить: {0}. Исключить: {1}.",
- "includeAppsTextFormat": "Включить: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Неизвестные области — это IP-адреса, которые невозможно сопоставить со страной или регионом.",
- "includeUnknownAreasCheckboxLabel": "Включить неизвестные области",
- "infoCommandLabel": "Сведения",
- "invalidCertDuration": "Недопустимый срок действия сертификата",
- "invalidIpAddress": "Необходимо указать допустимый IP-адрес.",
- "invalidReAuthSignInRiskOptionSelected": "Элемент управления сеансом \"Частота входа (каждый раз)\" не позволяет выбрать \"Без риска\" в элементе управления условиями \"Риск входа\".",
- "invalidUriErrorMsg": "Введите допустимый URI, например \"uri:contoso.com:acr\" ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Загрузить все",
- "loading": "Идет загрузка...",
- "locationConfigureNamedLocationsText": "Настроить все надежные расположения",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Слишком длинное имя расположения. Максимум — 256 символов",
- "locationSelectionBladeExcludeDescription": "Выбор расположений, которые будут исключены из политики.",
- "locationSelectionBladeIncludeDescription": "Выберите расположения, включаемые в эту политику",
- "locationsAllLocationsLabel": "Любое местонахождение",
- "locationsAllNamedLocationsLabel": "Все надежные IP-адреса",
- "locationsAllPrivateLinksLabel": "Все частные каналы в моем клиенте",
- "locationsIncludeExcludeLabel": "{0} и исключить все надежные IP-адреса",
- "locationsSelectedPrivateLinksLabel": "Выбранные приватные каналы",
- "lowRisk": "Низкий",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "Для управления политиками условного доступа вашей организации требуется Microsoft Entra ID P1 или P2.",
- "manageSecurityDefaultsAriaLabel": "Управление параметрами безопасности по умолчанию.",
- "markAsTrustedCheckboxInfoBalloonContent": "Вход из надежного расположения снижает риск входа пользователя. Отмечайте это расположение как надежное, только если указанные диапазоны IP-адресов в организации хорошо известны и получены из достоверных источников.",
- "markAsTrustedCheckboxLabel": "Отметить как надежное расположение",
- "mediumRisk": "Средняя",
- "memberSelectionCommandRemove": "Удалить",
- "menuItemClaimProviderControls": "Настраиваемые элементы управления (предварительная версия)",
- "menuItemClassicPolicies": "Классические политики",
- "menuItemInsightsAndReporting": "Аналитические данные и отчеты",
- "menuItemManage": "Управление",
- "menuItemNamedLocationsPreview": "Именованные расположения (предварительная версия)",
- "menuItemNamedNetworks": "Именованные расположения",
- "menuItemPolicies": "Политики",
- "menuItemTermsOfUse": "Условия использования",
- "modifiedTimeLabel": "Время изменения",
- "monday": "Понедельник",
- "nameLabel": "Имя",
- "namedLocationCountryInfoBanner": "Со странами и регионами сопоставляются только адреса IPv4. Адреса IPv6 включаются в неизвестные страны и регионы.",
- "namedLocationTypeCountry": "Страны/регионы",
- "namedLocationTypeLabel": "Задайте расположение, используя:",
- "namedLocationUpsellBanner": "Использовать это представление не рекомендуется. Перейти к новому улучшенному представлению \"Именованные расположения\".",
- "namedLocationsHelpDescription": "Именованные расположения используются отчетами о безопасности Microsoft Entra ID для сокращения числа ложноположительных результатов, а также политиками условного доступа Microsoft Entra.\n[Подробнее][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Добавьте новый диапазон IP-адресов (например: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "Нужно выбрать по меньшей мере одну страну или регион",
- "namedNetworkDeleteCommand": "Удалить",
- "namedNetworkDeleteDescription": "Вы действительно хотите удалить сеть \"{0}\"? Это действие невозможно отменить.",
- "namedNetworkDeleteTitle": "Вы уверены?",
- "namedNetworkDownloadIpRange": "Скачать",
- "namedNetworkInvalidRange": "Значение должно быть допустимым диапазоном IP-адресов.",
- "namedNetworkIpRangeNeeded": "Требуется по меньшей мере один допустимый диапазон IP-адресов.",
- "namedNetworkIpRangesDescriptionContent": "Настройка диапазонов IP-адресов организации",
- "namedNetworkIpRangesTab": "Диапазоны IP-адресов",
- "namedNetworkListAdd": "Создать расположение",
- "namedNetworkListConfigureTrustedIps": "Настройка доверенных IP-адресов многофакторной проверки подлинности",
- "namedNetworkNameDescription": "Пример: \"офис Redmond\"",
- "namedNetworkNameInvalid": "Указанное имя недопустимо.",
- "namedNetworkNameRequired": "Необходимо указать имя для этого расположения.",
- "namedNetworkNoIpRanges": "Диапазоны IP-адресов отсутствуют",
- "namedNetworkNotificationCreateDescription": "Создание расположения с именем \"{0}\"",
- "namedNetworkNotificationCreateFailedDescription": "Сбой при создании расположения \"{0}\". Повторите попытку позже.",
- "namedNetworkNotificationCreateFailedTitle": "Не удалось создать расположение",
- "namedNetworkNotificationCreateSuccessDescription": "Создано расположение с именем \"{0}\"",
- "namedNetworkNotificationCreateSuccessTitle": "Создана сеть \"{0}\"",
- "namedNetworkNotificationCreateTitle": "Идет создание сети \"{0}\"",
- "namedNetworkNotificationDeleteDescription": "Удаление расположения с именем \"{0}\"",
- "namedNetworkNotificationDeleteFailedDescription": "Сбой при удалении расположения \"{0}\". Повторите попытку позже.",
- "namedNetworkNotificationDeleteFailedTitle": "Не удалось удалить расположение",
- "namedNetworkNotificationDeleteSuccessDescription": "Расположение с именем \"{0}\" удалено",
- "namedNetworkNotificationDeleteSuccessTitle": "Сеть \"{0}\" удалена.",
- "namedNetworkNotificationDeleteTitle": "Идет удаление \"{0}\"",
- "namedNetworkNotificationUpdateDescription": "Изменение расположения с именем \"{0}\"",
- "namedNetworkNotificationUpdateFailedDescription": "Сбой при изменении расположения \"{0}\". Повторите попытку позже.",
- "namedNetworkNotificationUpdateFailedTitle": "Не удалось изменить расположение",
- "namedNetworkNotificationUpdateSuccessDescription": "Расположение с именем \"{0}\" изменено",
- "namedNetworkNotificationUpdateSuccessTitle": "Сеть \"{0}\" изменена.",
- "namedNetworkNotificationUpdateTitle": "Идет обновление сети \"{0}\".",
- "namedNetworkSearchPlaceholder": "Поиск расположений.",
- "namedNetworkUploadFailedDescription": "Произошла ошибка при анализе предоставленного файла. Отправьте обычный текстовый файл со строками в формате CIDR.",
- "namedNetworkUploadFailedTitle": "Не удалось проанализировать \"{0}\".",
- "namedNetworkUploadInProgressDescription": "Выполняется попытка проанализировать допустимые значения CIDR из \"{0}\".",
- "namedNetworkUploadInProgressTitle": "Анализируется \"{0}\"",
- "namedNetworkUploadInvalidDescription": "\"{0}\" слишком велик или имеет недопустимый формат.",
- "namedNetworkUploadInvalidTitle": "Недопустимый файл \"{0}\"",
- "namedNetworkUploadIpRange": "Отправка",
- "namedNetworkUploadSuccessDescription": "Проанализировано строк: {0}. В неправильном формате: {1}. Пропущено: {2}.",
- "namedNetworkUploadSuccessTitle": "Завершен анализ \"{0}\"",
- "namedNetworksAdd": "Новое именованное расположение",
- "namedNetworksConditionHelpDescription": "Управление доступом пользователей на основе физического расположения.\n[Дополнительные сведения][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "Исключены: {0} и {1}",
- "namedNetworksHelpDescription": "Именованные расположения используются отчетами о безопасности Microsoft Entra ID для сокращения числа ложноположительных результатов, а также политиками условного доступа Microsoft Entra.\n[Подробнее][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "Включено: {0}",
- "namedNetworksNone": "Нет именованных расположений",
- "namedNetworksTitle": "Настройка расположений",
- "namednetworkExceedingSizeErrorBladeTitle": "Сведения об ошибке",
- "namednetworkExceedingSizeErrorDetailText": "Для получения дополнительных сведений щелкните здесь.",
- "namednetworkExceedingSizeErrorMessage": "Максимальный допустимый размер хранилища для именованных расположений превышен. Попробуйте сократить список. Для получения дополнительных сведений щелкните здесь.",
- "needMfaSecondary": "Если выбран параметр \"Частота входа: каждый раз\" с параметром \"Только дополнительные методы проверки подлинности\", необходимо выбрать параметр \"Требовать многофакторную проверку подлинности\"",
- "needMfaSpecificApps": "Для элемента управления сеансом \"Частота попыток входа: каждый раз\" требуется элемент управления разрешением \"Требовать многофакторную проверку подлинности\", когда выбраны поддерживаемые приложения.",
- "newCertName": "Новый сертификат",
- "noAttributePermissionsError": "Недостаточно прав для создания или изменения политики. Чтобы добавить или изменить динамические фильтры, требуется роль читателя определений атрибутов.",
- "noPolicyRowMessage": "Политик нет",
- "noSPSelected": "Не выбран ни один субъект-служба",
- "noUpdatePermissionMessage": "У вас нет разрешений для изменения этих параметров. Запросите доступ у глобального администратора.",
- "noUserSelected": "Пользователи не выбраны",
- "noneRisk": "Без риска",
- "office365Description": "Эти приложения включают Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer и другие.",
- "office365InfoBox": "По крайней мере одно из выбранных приложений входит в состав Office 365. Рекомендуется настроить эту политику для приложения Office 365.",
- "oneUserSelected": "Выбран один пользователь",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Только глобальные администраторы могут сохранить эту политику.",
- "or": "{0} ИЛИ {1} ",
- "pickerDoneCommand": "Готово",
- "policiesBladeAdPremiumUpsellBannerText": "Microsoft Entra ID Premium позволяет вам создавать собственные политики под конкретные условия: облачные приложения, риски входа и платформы устройств",
- "policiesBladeTitle": "Политики",
- "policiesBladeTitleWithAppName": "Политик: {0}",
- "policiesDisabledBannerText": "Создание и изменение политик запрещено для приложений, с которыми связан атрибут входа.",
- "policiesHitMaxLimitStatusBarMessage": "Достигнуто максимальное число политик для этого клиента. Перед созданием дополнительных политик удалите существующие.",
- "policyAssignmentsSection": "Назначения",
- "policyBlockAllInfoBox": "Настроенная политика заблокирует всех пользователей, поэтому она не поддерживается. Проверьте назначения и средства контроля. Исключите текущего пользователя {0}, если вы хотите сохранить эту политику.",
- "policyCloudAppsDisplayTextAllApp": "Все приложения",
- "policyCloudAppsLabel": "Облачные приложения",
- "policyConditionClientAppDescription": "Программное обеспечение, которое пользователь использует для обращения к облачному приложению. Например, браузер.",
- "policyConditionClientAppV2Description": "Программное обеспечение, которое пользователь использует для обращения к облачному приложению. Например, браузер.",
- "policyConditionDevicePlatform": "Платформы устройств",
- "policyConditionDevicePlatformDescription": "Платформа, с которой пользователь выполняет вход. Например, iOS.",
- "policyConditionLocation": "Расположение",
- "policyConditionLocationDescription": "Расположение, определенное при помощи диапазона IP-адресов, из которого пользователь выполняет вход.",
- "policyConditionLocationPreview": "Расположения (предварительная версия)",
- "policyConditionSigninRisk": "Риск при входе",
- "policyConditionSigninRiskDescription": "Вероятность входа по чужим учетным данным. Уровень риска может быть высоким, средним или низким. Требуется лицензия Microsoft Entra ID P2.",
- "policyConditionUserRisk": "Риск пользователя",
- "policyConditionUserRiskDescription": "Настройте уровни риска пользователей, необходимые для применения политики.",
- "policyConditioniClientApp": "Клиентские приложения",
- "policyControlAllowAccessDisplayedName": "Разрешить доступ",
- "policyControlAuthenticationStrengthDisplayedName": "Требуемая надежность проверки подлинности (предварительная версия)",
- "policyControlBladeTitle": "Предоставление",
- "policyControlBlockAccessDisplayedName": "Блокировка доступа",
- "policyControlCompliantDeviceDisplayedName": "Требовать, чтобы устройство было отмечено как соответствующее",
- "policyControlContentDescription": "Управляйте применением доступа для его блокировки или предоставления.",
- "policyControlInfoBallonText": "Заблокируйте доступ или укажите дополнительные требования, которые необходимо выполнить для разрешения доступа.",
- "policyControlMfaChallengeDisplayedName": "Требовать многофакторную проверку подлинности",
- "policyControlRequireCompliantAppDisplayedName": "Требование политики защиты приложений",
- "policyControlRequireDomainJoinedDisplayedName": "Потребовать устройство с гибридным присоединением к Microsoft Entra",
- "policyControlRequireMamDisplayedName": "Требовать утвержденное клиентское приложение",
- "policyControlRequiredPasswordChangeDisplayedName": "Требовать изменения пароля",
- "policyControlSelectAuthStrength": "Требуемая надежность проверки подлинности",
- "policyControlsNoControlsSelected": "Выбрано 0 механизмов управления",
- "policyControlsSection": "Элементы управления доступом",
- "policyCreatBladeTitle": "Создать",
- "policyCreateButton": "Создать",
- "policyCreateFailedMessage": "Ошибка. {0}",
- "policyCreateFailedTitle": "Не удалось создать политику \"{0}\"",
- "policyCreateInProgressTitle": "Идет создание сети \"{0}\"",
- "policyCreateSuccessMessage": "Политика \"{0}\" создана. Она будет включена через несколько минут, если параметр \"Включить политику\" имеет значение \"Включен\".",
- "policyCreateSuccessTitle": "Политика \"{0}\" создана",
- "policyDeleteConfirmation": "Вы действительно хотите удалить сеть \"{0}\"? Это действие невозможно отменить.",
- "policyDeleteFailTitle": "Не удалось удалить \"{0}\"",
- "policyDeleteInProgressTitle": "Идет удаление \"{0}\"",
- "policyDeleteSuccessTitle": "\"{0}\" успешно удалено",
- "policyEnforceLabel": "Включить политику",
- "policyErrorCannotSetSigninRisk": "У вас нет разрешений на сохранение политики с условием риска для входа.",
- "policyErrorNoPermission": "У вас нет разрешения на сохранение политики. Обратитесь к глобальному администратору.",
- "policyErrorUnknown": "Что-то пошло не так, повторите попытку позже.",
- "policyFallbackWarningMessage": "Не удалось создать или обновить \"{0}\" с помощью MS Graph, что привело к откату к AD Graph. Изучите следующий сценарий, так как наиболее вероятно возникновение ошибки при вызове конечной точки политики для MS Graph с несовместимым условием.",
- "policyFallbackWarningTitle": "Создание или обновление \"{0}\" выполнено частично успешно",
- "policyNameCannotBeEmpty": "Имя политики не может быть пустым.",
- "policyNameDevice": "Политика устройства",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Политика управления мобильными приложениями",
- "policyNameMfaLocation": "Политика многофакторной проверки подлинности и расположения",
- "policyNamePlaceholderText": "Пример: \"политика в отношении соответствия приложений на устройствах\"",
- "policyNameTooLongError": "Слишком длинное имя политики. Максимум — 256 символов",
- "policyOff": "Выкл.",
- "policyOn": "Вкл.",
- "policyReportOnly": "Только отчет",
- "policyReviewSection": "Просмотр",
- "policySaveButton": "Сохранить",
- "policyStatusIconDescription": "Политика включена",
- "policyStatusIconEnabled": "Значок состояния \"Включено\"",
- "policyTemplateName1": "Использовать ограничения, применяемые приложением, для доступа к {0} в браузере",
- "policyTemplateName2": "Разрешить доступ для {0} только на управляемых устройствах",
- "policyTemplateName3": "Политика, перенесенная из параметров Непрерывной оценки доступа",
- "policyTriggerRiskSpecific": "Выберите уровень риска",
- "policyTriggersInfoBalloonText": "Условия, при которых будет применена политика. Например, \"расположение\".",
- "policyTriggersNoConditionsSelected": "Выбрано 0 условий",
- "policyTriggersSelectorLabel": "Условия",
- "policyUpdateFailedMessage": "Ошибка. {0}",
- "policyUpdateFailedTitle": "Не удалось обновить {0}",
- "policyUpdateInProgressTitle": "Идет обновление {0}",
- "policyUpdateSuccessMessage": "Политика {0} обновлена. Она будет включена через несколько минут, если параметр \"Включить политику\" имеет значение \"Включен\".",
- "policyUpdateSuccessTitle": "{0} успешно обновлено",
- "primaryCol": "Основной",
- "privateLinkLabel": "Приватный канал Microsoft Entra ID",
- "reportOnlyInfoBox": "Режим \"Только отчет\": при входе выполняется оценка соответствия политикам и запись в журнал, но пользователи никак не затрагиваются.",
- "requireAllControlsText": "Требовать все выбранные элементы управления",
- "requireCompliantDevice": "Требовать соответствующее устройство",
- "requireDomainJoined": "Требуется устройство, присоединенное к домену",
- "requireGrantReauth": "Для элемента управления сеансом \"Частота попыток входа: каждый раз\" требуется элемент управления разрешениями \"Требовать многофакторную проверку подлинности\" или \"Требовать смену пароля\", если выбран параметр \"Все облачные приложения\"",
- "requireMFA": "Требовать многофакторную проверку подлинности",
- "requireMfaReauth": "Для элемента управления сеансом \"Частота попыток входа: каждый раз\" требуется элемент управления разрешением \"Требовать многофакторную проверку подлинности\" для параметра \"Риск при входе\"",
- "requireOneControlText": "Требовать один из выбранных элементов управления",
- "requirePasswordChangeReauth": "Элементу управления сеансом \"Частота входа (каждый раз)\" требуется управление предоставлением разрешения \"Требовать смену пароля\" для параметра \"Риск пользователя\"",
- "requireRiskReauth": "Элементу управления сеансом \"Частота входа (каждый раз)\" требуется элемент управления сеансом \"Риск пользователя\" или \"Риск при входе\", если выбран параметр \"Все облачные приложения\".",
- "requireRiskReauthRiskNotEnabled": "Элемент управления сеансом \"Частота входа (каждый раз)\" недоступен, если выбран параметр \"Все облачные приложения\".",
- "requireRiskReauthSignInOnly": "Элементу управления сеансом \"Частота входа (каждый раз)\" требуется элемент управления сеансом \"Риск при входе\", если выбран параметр \"Все облачные приложения\".",
- "requireRiskReauthUserOnly": "Элементу управления сеансом \"Частота входа (каждый раз)\" требуется элемент управления сеансом \"Риск пользователя\", если выбран параметр \"Все облачные приложения\".",
- "resetFilters": "Сброс фильтров",
- "sPRequired": "Требуется субъект-служба",
- "sPSelectorInfoBalloon": "Пользователь или субъект-служба, которые нужно проверить",
- "saturday": "Суббота",
- "searchTextTooLongError": "Слишком длинный поисковый запрос. Максимальное число символов — 256.",
- "securityDefaultsPolicyName": "Параметры безопасности по умолчанию",
- "securityDefaultsTextMessage": "Для включения политики условного доступа необходимо отключить параметры безопасности по умолчанию.",
- "securityDefaultsUpdateInProgressText": "Выполняется обновление параметров безопасности по умолчанию. Подождите несколько секунд и повторите попытку.",
- "securityDefaultsWarningMessage": "Похоже, вы собираетесь управлять конфигурациями безопасности организации. Отлично! Перед включением политики условного доступа необходимо {0}отключить параметры безопасности по умолчанию{1}.",
- "selectDevicePlatforms": "Выбрать платформы устройств",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Выберите расположения",
- "selectedSP": "Выбранный субъект-служба",
- "servicePrincipalBladeExcludedSelectorTitle": "Выберите исключенные субъекты-службы",
- "servicePrincipalBladeIncludedSelectorTitle": "Выберите субъекты-службы",
- "servicePrincipalDataGridAria": "Список доступных субъектов-служб",
- "servicePrincipalDropDownLabel": "К чему применяется эта политика?",
- "servicePrincipalInfoBox": "Некоторые условия недоступны из-за выбора \"{0}\" в назначении политики",
- "servicePrincipalRadioAll": "Все субъекты-службы, находящиеся в собственности",
- "servicePrincipalRadioSelect": "Выберите субъекты-службы",
- "servicePrincipalSelectionsAria": "Сетка выбранных субъектов-служб",
- "servicePrincipalSelectorAria": "Список выбранных субъектов-служб",
- "servicePrincipalSelectorMultiple": "Выбрано субъектов-служб: {0}",
- "servicePrincipalSelectorSingle": "Выбран один субъект-служба",
- "servicePrincipalSpecificExc": "Исключены конкретные субъекты-службы",
- "servicePrincipalSpecificInc": "Включены конкретные субъекты-службы",
- "servicePrincipals": "Субъекты-службы",
- "sessionControlBladeTitle": "Сеанс",
- "sessionControlDescriptionContent": "Управляйте доступом пользователей на основе элементов управления сеансами для ограничения возможностей взаимодействия с определенными облачными приложениями.",
- "sessionControlDisableInfo": "Этот элемент управления работает только с поддерживаемыми приложениями. Сейчас Office 365, Exchange Online и SharePoint Online — единственные облачные приложения, которые поддерживают ограничения приложений. Щелкните здесь, чтобы получить дополнительные сведения.",
- "sessionControlInfoBallonText": "Элементы управления сеанса предоставляют ограниченную функциональность в облачных приложениях.",
- "sessionControls": "Элементы управления сеансом",
- "sessionControlsAppEnforcedLabel": "Использовать ограничения, применяемые приложениями",
- "sessionControlsCasLabel": "Использовать управление условным доступом к приложениям",
- "sessionControlsSecureSignInLabel": "Требовать привязку токена",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "Включено: {0}",
- "signinRiskReauth": "Если выбрано разрешение \"Требовать многофакторную проверку подлинности\" и элемент управления сеансом \"Частота попыток входа: каждый раз\", необходимо выбрать условие \"Риск при входе\"",
- "signinRiskTriggerDescriptionContent": "Выберите уровень риска при входе",
- "singleTenantServicePrincipalInfoBallonText": "Политика применяется только к субъектам-службам одного клиента, принадлежащим вашей организации. Щелкните здесь, чтобы получить дополнительные сведения ",
- "specificSigninRiskLevelsOption": "Выберите конкретные уровни риска для входа",
- "specificUsersExcluded": "отдельные пользователи исключены",
- "specificUsersIncluded": "Отдельные пользователи включены",
- "specificUsersIncludedAndExcluded": "Определенные пользователи, исключенные и включенные",
- "startDatePickerLabel": "Запускается",
- "startFreeTrial": "Начните пользоваться бесплатной пробной версией",
- "startTimePickerLabel": "Время начала",
- "sunday": "Воскресенье",
- "testButton": "Параметр \"What If\"",
- "thumbprintCol": "Отпечаток",
- "thursday": "Четверг",
- "timeConditionAllTimesLabel": "В любое время",
- "timeConditionIntroText": "Настройте время, когда будет применяться политика",
- "timeConditionSelectorInfoBallonContent": "Время входа пользователя в систему. Например, \"Среда с 09:00 до 17:00 по тихоокеанскому стандартному времени\"",
- "timeConditionSelectorLabel": "Время (предварительная версия)",
- "timeConditionSpecificLabel": "Определенное время",
- "timeSelectorAllTimesText": "В любое время",
- "timeSelectorSpecificTimesText": "Определенное время настроено",
- "timeZoneDropdownInfoBalloonContent": "Выберите часовой пояс, в котором указан диапазон времени. Эта политика применяется к пользователям во всех часовых поясах. Например, время \"Среда с 9:00 до 17:00\" выглядит как \"Среда с 10:00 до 18:00\" для пользователя в другом часовом поясе.",
- "timeZoneDropdownLabel": "Часовой пояс",
- "timeZoneDropdownPlaceholderText": "Выберите часовой пояс",
- "tooManyPoliciesDescription": "Сейчас отображаются только первые 50 политик. Щелкните здесь, чтобы увидеть все политики.",
- "tooManyPoliciesTitle": "Найдено больше 50 политик.",
- "trustedLocationStatusIconDescription": "Это надежное расположение",
- "trustedLocationStatusIconEnabled": "Значок состояния \"Надежное\"",
- "tuesday": "Вторник",
- "uploadInBadState": "Не удалось отправить указанный файл.",
- "upsellAppsDescription": "Требовать многофакторную проверку подлинности для конфиденциальных приложений всегда или только при использовании вне сети организации.",
- "upsellAppsTitle": "Защита приложений",
- "upsellBannerText": "Получить бесплатную пробную версию уровня \"Премиум\" для использования этой возможности",
- "upsellDataDescription": "Требовать, чтобы для получения доступа к ресурсам компании устройство было помечено как соответствующее требованиям или являлось устройством с гибридным присоединением к Microsoft Entra.",
- "upsellDataTitle": "Защита данных",
- "upsellDescription": "Условный доступ предоставляет механизмы управления и защиту, необходимые для обеспечения безопасности данных организации, а также позволяет пользователям наиболее эффективно работать с любого устройства. Например, вы можете разрешить доступ только при работе из локальной сети или запретить доступ устройствам, которые не соответствуют политикам.",
- "upsellRiskDescription": "Требовать многофакторную проверку подлинности для событий риска, обнаруженных системой машинного обучения Майкрософт.",
- "upsellRiskTitle": "Защита от рисков",
- "upsellTitle": "Условный доступ",
- "upsellWhyTitle": "Зачем нужно использовать условный доступ?",
- "userAppNoneOption": "Нет",
- "userNamePlaceholderText": "Введите имя пользователя",
- "userNotSetSeletorLabel": "Выбрано 0 пользователей и групп",
- "userOnlySelectionBladeExcludeDescription": "Выберите пользователей, которые будут исключены из политики",
- "userOrGroupSelectionCountDiffBannerText": "{0}, настроенные в этой политике, были удалены из каталога, однако это не влияет на других пользователей и на другие группы в политике. При следующем обновлении политики удаленные пользователи и/или группы будут автоматически удалены.",
- "userOrSPNotSetSelectorLabel": "Удостоверения пользователей или рабочих нагрузок не выбраны",
- "userOrSPSelectionBladeTitle": "Удостоверения пользователей или рабочих нагрузок",
- "userOrSPSelectorInfoBallonText": "Удостоверения в каталоге, к которому применяется политика, включая пользователей, группы и субъекты-службы",
- "userRequired": "Требуется пользователь",
- "userRiskErrorBox": "Если выбрано предоставления разрешения \"Требовать изменения пароля\", необходимо выбрать условие \"Пользовательский риск\".",
- "userRiskReauth": "Если выбрано разрешение \"Требовать смену пароля\" и элемент управления сеансом \"Частота входа (каждый раз)\", необходимо выбрать условие \"Риск пользователя\", а не \"Риск входа\"",
- "userSPRequired": "Требуется пользователь или субъект-служба",
- "userSPSelectorTitle": "Удостоверение пользователя или рабочей нагрузки",
- "userSelectionBladeAllUsersAndGroups": "Все пользователи и группы",
- "userSelectionBladeExcludeDescription": "Выбор пользователей и групп, которые будут исключены из политики.",
- "userSelectionBladeExcludeTabTitle": "Исключить",
- "userSelectionBladeExcludedSelectorTitle": "Выберите пользователей и группы для исключения",
- "userSelectionBladeIncludeDescription": "Выберите пользователей, к которым будет применяться эта политика",
- "userSelectionBladeIncludeTabTitle": "Включение",
- "userSelectionBladeIncludedSelectorTitle": "Выбрать",
- "userSelectionBladeSelectUsers": "Выбрать пользователей",
- "userSelectionBladeSelectedUsers": "Выбрать пользователей и группы",
- "userSelectionBladeTitle": "Пользователи и группы",
- "userSelectorBladeTitle": "Пользователи",
- "userSelectorExcluded": "Исключено: {0}",
- "userSelectorGroupPlural": "Групп: {0}",
- "userSelectorGroupSingular": "1 группа",
- "userSelectorIncluded": "Включено: {0}",
- "userSelectorInfoBallonText": "Пользователи и группы в каталоге, к которому применяется политика. Например, \"пилотная группа\".",
- "userSelectorSelected": "Выбрано: {0}.",
- "userSelectorTitle": "Пользователь",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "Пользователи: {0}",
- "userSelectorUserSingular": "1 пользователь",
- "userSelectorWithExclusion": "{0} и {1}",
- "usersGroupsLabel": "Пользователи и группы",
- "viewApprovedAppsText": "Смотреть список утвержденных клиентских приложений",
- "viewCompliantAppsText": "Смотреть список клиентских приложений, защищенных политикой",
- "viewPolicyInformation": "Просмотреть информацию о политике",
- "vpnBladeTitle": "Подключение VPN",
- "vpnCertCreateFailedMessage": "Ошибка: {0}",
- "vpnCertCreateFailedTitle": "Не удалось создать {0}.",
- "vpnCertCreateInProgressTitle": "Создание {0}",
- "vpnCertCreateSuccessMessage": "Сертификат {0} успешно создан.",
- "vpnCertCreateSuccessTitle": "{0} создана.",
- "vpnCertNoRowsMessage": "Сертификаты VPN не найдены",
- "vpnCertUpdateFailedMessage": "Ошибка: {0}",
- "vpnCertUpdateFailedTitle": "Не удалось обновить {0}",
- "vpnCertUpdateInProgressTitle": "Идет обновление {0}",
- "vpnCertUpdateSuccessMessage": "Сертификат {0} успешно обновлен.",
- "vpnCertUpdateSuccessTitle": "{0} успешно обновлено",
- "vpnFeatureInfo": "Чтобы получить дополнительные сведения о подключении VPN и условном доступе, щелкните здесь.",
- "vpnFeatureWarning": "После создания на портале сертификата VPN Microsoft Entra ID начнет использовать его для выдачи краткосрочных сертификатов VPN-клиенту. Чтобы избежать проблем с проверкой учетных данных VPN-клиента, необходимо немедленно развернуть сертификат VPN на VPN-сервере.",
- "vpnMenuText": "Подключение VPN",
- "vpncertDropdownDefaultOption": "Длительность",
- "vpncertDropdownInfoBalloonContent": "Выберите срок действия создаваемого сертификата",
- "vpncertDropdownLabel": "Выбрать длительность",
- "vpncertDropdownOneyearOption": "1 год",
- "vpncertDropdownThreeyearOption": "3 года",
- "vpncertDropdownTwoyearOption": "2 года",
- "wednesday": "Среда",
- "whatIfCountry": "Страна или регион",
- "whatIfCountryInfo": "Страна или регион, из которой входит пользователь.",
- "whatIfDevicePlatformInfo": "Платформа устройства, с которой пользователь входит в систему.",
- "whatIfEnterIpAddress": "Введите IP-адрес (например: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "Указан недопустимый адрес IP.",
- "whatIfIpAddress": "IP-адрес",
- "whatIfIpAddressInfo": "IP-адрес, с которого пользователь входит в систему.",
- "whatIfIpCountryInfoBoxText": "При указании IP-адреса или страны или региона оба поля являются обязательными и должны правильно сопоставляться.",
- "whatIfSelectCountry": "Выберите страну или регион...",
- "whatIfSelectDevicePlatform": "Выберите платформу устройства...",
- "whatIfSelectPrivateLink": "Выберите приватный канал…",
- "whatIfSelectSignInRisk": "Выберите риск входа…",
- "whatIfSignInRisk": "Риск при входе",
- "whatIfSignInRiskInfo": "Уровень риска, связанный со входом в систему",
- "whatIfUnknownAreas": "Неизвестные области",
- "windows365InfoBox": "Выбор Windows 365 повлияет на подключения к облачным компьютерам и узлам сеансов виртуальных рабочих столов Azure. Щелкните здесь для получения дополнительных сведений.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Удостоверения рабочей нагрузки (предварительная версия)",
- "workloadIdentitiesLicenseText": "Для изменения этой политики требуется премиум-лицензия P1 или P2 удостоверений рабочей нагрузки.",
- "workloadIdentity": "Удостоверение рабочей нагрузки"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Не поддерживается",
- "supportEnding": "Завершение поддержки",
- "supported": "Поддерживается"
- }
- },
- "SecurityTemplate": {
- "aSR": "Сокращение направлений атак",
- "accountProtection": "Защита учетной записи",
- "allDevices": "Все устройства",
- "antivirus": "Антивирус",
- "antivirusReporting": "Отчеты антивирусных программ (предварительная версия)",
- "conditionalAccess": "Условный доступ",
- "deviceCompliance": "Соответствие устройства политике",
- "diskEncryption": "Шифрование диска",
- "eDR": "Обнаружение и нейтрализация атак на конечные точки",
- "ePM": "Управление привилегиями конечной точки",
- "firewall": "Брандмауэр",
- "helpSupport": "Справка и поддержка",
- "setup": "Установка",
- "wdapt": "Microsoft Defender для конечной точки"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Сбой",
- "hardReboot": "Холодная перезагрузка",
- "retry": "Повторить",
- "softReboot": "Горячая перезагрузка",
- "success": "Успешно выполнено"
- },
- "Columns": {
- "codeType": "Тип кода",
- "returnCode": "Код возврата"
- },
- "bladeTitle": "Коды возврата",
- "gridAriaLabel": "Коды возврата",
- "header": "Задайте коды возврата, чтобы указать действия после установки:",
- "onAddAnnounceMessage": "Код возврата: добавлен элемент {0} из {1}.",
- "onDeleteSuccess": "Код возврата {0} удален.",
- "returnCodeAlreadyUsedValidation": "Код возврата уже используется.",
- "returnCodeMustBeIntegerValidation": "Код возврата должен быть целым числом.",
- "returnCodeShouldBeAtLeast": "Код возврата не может быть меньше {0}.",
- "returnCodeShouldBeAtMost": "Код возврата не может превышать {0}.",
- "selectorLabel": "Коды возврата"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Арабский",
- "bulgarian": "Болгарский",
- "chineseSimplified": "Китайский (упрощенное письмо)",
- "chineseTraditional": "Китайский (традиционное письмо)",
- "croatian": "Хорватский",
- "czech": "Чешский",
- "danish": "Датский",
- "dutch": "Нидерландский",
- "englishUK": "Английский (Соединенное Королевство)",
- "englishUS": "Английский (США)",
- "estonian": "Эстонский",
- "finnish": "Финский",
- "frenchCanada": "Французский (Канада)",
- "frenchFrance": "Французский (Франция)",
- "german": "Немецкий",
- "greek": "Греческий",
- "hebrew": "Иврит",
- "hungarian": "Венгерский",
- "italian": "Итальянский",
- "japanese": "Японский",
- "korean": "Корейский",
- "latvian": "Латышский",
- "lithuanian": "Литовский",
- "norwegian": "Норвежский (букмол)",
- "polish": "Польский",
- "portugueseBrazil": "Португальский (Бразилия)",
- "portuguesePortugal": "Португальский (Португалия)",
- "romanian": "Румынский",
- "russian": "Русский",
- "serbian": "Сербский",
- "slovak": "Словацкий",
- "slovenian": "Словенский",
- "spanishMexico": "Испанский (Мексика)",
- "spanishSpain": "Испанский (Испания)",
- "swedish": "Шведский",
- "thai": "Таиланд",
- "turkish": "Турецкий",
- "ukrainian": "Украинский"
- },
- "Summary": {
- "placeholder": "Выберите уведомление в левой части, чтобы просмотреть его содержимое."
- },
- "companyContact": "Показать контактные данные",
- "companyLogo": "Показать логотип организации",
- "companyName": "Показать название организации",
- "createEditDescription": "Создание или изменение шаблонов сообщений с уведомлениями.",
- "createMessage": "Создать сообщение",
- "deviceDetails": "Показать сведения об устройстве",
- "deviceDetailsInfoBox": "По умолчанию этот параметр отключен, так как получение сведений об устройстве может привести к задержке получения уведомлений по электронной почте.",
- "editImpactInfo": "Изменение этого шаблона сообщений с уведомлениями повлияет на все политики, которые используют этот шаблон.",
- "editMessage": "Изменить сообщение",
- "email": "электронная почта",
- "emailFooterTitle": "Нижний колонтитул сообщения электронной почты",
- "emailHeaderFooterInfo": "Параметры колонтитулов для уведомлений по электронной почте зависят от параметров персонализации в узле администрирования клиента в Endpoint Manager.",
- "emailHeaderTitle": "Заголовок сообщения электронной почты",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Настроить параметры персонализации",
- "formSubTitle": "Создание или изменение электронных писем с уведомлениями.",
- "headerFooterSettingsTab": "Настройки верхнего и нижнего колонтитула",
- "imgPreview": "Предварительный просмотр изображения",
- "infotext": "Выберите уведомление. Чтобы создать уведомление, перейдите в подраздел \"Уведомление\" раздела \"Управление\" рабочей нагрузки \"Задание соответствия устройства требованиям\".",
- "iwLink": "Показать ссылку на веб-сайт корпоративного портала",
- "listEmpty": "Шаблонов сообщений нет.",
- "listEmptySelectOnly": "Шаблонов сообщений нет. Чтобы создать уведомление, откройте раздел \"Уведомления\" в разделе \"Управление\" рабочей нагрузки \"Задание соответствия устройства требованиям\".",
- "listSubTitle": "Список шаблонов сообщений с уведомлениями",
- "listTitle": "Шаблоны уведомлений",
- "localizedNotificationMessageTemplates": "Локализованные шаблоны уведомлений",
- "messageAssigned": "Невозможно удалить шаблон сообщений, так как он используется одной политикой соответствия или несколькими.",
- "messageCapitalized": "Шаблон сообщения уведомления",
- "messageLowercase": "шаблон сообщения уведомления",
- "missingDefaultError": "Выберите шаблон по умолчанию",
- "notificationMessageTemplates": "Шаблоны уведомлений",
- "rowValidationError": "Требуется минимум один шаблон сообщения.",
- "selectDescription": "Выберите сообщение с уведомлением. Чтобы создать уведомление, перейдите в подраздел \"Уведомления\" раздела \"Управление\" рабочей нагрузки \"Задание соответствия устройства требованиям\".",
- "tenantValueText": "Стоимость арендатора",
- "testEmailLabel": "Отправить предварительную версию электронного письма",
- "localeLabel": "Языковой стандарт",
- "isDefaultLocale": "По умолчанию"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Число дней до принудительной перезагрузки"
- },
"Description": {
"label": "Описание"
},
+ "FeatureDeploymentSettings": {
+ "header": "Параметры развертывания компонентов"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Этот компонент не может снизить уровень устройства.",
+ "label": "Развертываемое обновление компонентов"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Доступность для последней группы"
+ },
+ "GradualRolloutInterval": {
+ "label": "Дни между группами"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Доступность для первой группы"
+ },
"Name": {
"label": "Имя"
},
- "QualityUpdateRelease": {
- "label": "Ускоренная установка исправлений, если версия ОС устройства ниже:"
- },
- "bladeTitle": "Исправления для Windows 10 и более поздних версий (предварительная версия)",
- "loadError": "Не удалось выполнить загрузку!"
+ "OptionalUpdate": {
+ "label": "Обязательное или необязательное обновление"
+ },
+ "RolloutOptions": {
+ "label": "Параметры выпуска"
+ },
+ "RolloutSettings": {
+ "header": "Когда следует сделать это обновление доступным в Центре обновления Windows?"
+ },
+ "ScopeSettings": {
+ "header": "Настройка тегов области для этой политики."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "Первая доступная дата"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Отключено",
+ "enabled": "Включено",
+ "infoBalloonContent": "Управляйте тем, нужно ли устанавливать последнее обновление компонентов Windows 10 на устройства, не подходящие для Windows 11",
+ "label": "Если устройство не подходит для запуска Windows 11, установите последнее обновление компонентов Windows 10",
+ "notApplicable": "Неприменимо",
+ "summaryLabel": "Установите Windows 10 на устройства, не поддерживающие Windows 11."
+ },
+ "bladeTitle": "Развертывания обновления компонентов",
+ "deploymentSettingsTitle": "Параметры развертывания",
+ "loadError": "Загрузка не выполнена!",
+ "windows11EULA": "Выбирая развертывание этого обновления компонентов, вы соглашаетесь, что при применении этой операционной системы к устройству (1) соответствующая лицензия Windows была приобретена в рамках корпоративного лицензирования или (2) вы уполномочены накладывать обязательства на вашу организацию и принимаете от имени организации соответствующие условия лицензионного соглашения на использование программного обеспечения корпорации Майкрософт, доступные здесь {0}."
},
+ "Notifications": {
+ "deploymentSaved": "Развертывание \"{0}\" сохранено.",
+ "newFeatureUpdateDeploymentCreated": "Создано новое развертывание обновления компонентов."
+ },
"TabName": {
- "qualityUpdateSettings": "Параметры"
+ "deploymentSettings": "Параметры развертывания",
+ "groupAssignmentSettings": "Назначения",
+ "scopeSettings": "Теги области"
},
- "infoBoxText": "Единственным выделенным элементом управления исправлениями, который доступен в настоящее время, за исключением существующей политики кругов обновления для Windows 10 и более поздних версий, является возможность ускорения исправлений для устройств, находящихся ниже указанного уровня исправлений. Дополнительные элементы управления станут доступны в будущем.",
- "licenseLearnMoreText": "Дополнительные сведения о предварительных требованиях и политиках качественного обновления.",
- "licenseWarningBoxText": "Для создания политик качественного обновления требуется специальное лицензирование.",
- "warningBoxText": "Хотя ускорение обновлений программного обеспечения позволит быстрее обеспечить соответствие требованиям, весьма вероятно, что оно нарушит работу пользователей из-за необходимости перезагрузки в рабочие часы."
+ "gradualRolloutLicenseWarning": "Эта возможность требует специального лицензирования.",
+ "gradualRolloutLicenseWarningEdit": "Эту возможность можно продолжать использовать и настраивать до тех пор, пока политика не будет сохранена без выбранной возможности.",
+ "licenseLearnMoreText": "Дополнительные сведения о предварительных требованиях и политиках обновления функций.",
+ "optionalUpdateWarning": "Вариант \"Необязательное\" доступен только для обновлений Windows 11",
+ "profileNameWarning": "Длина имени должна быть менее 64 символов",
+ "specificLicensingRequired": "Для некоторых выбранных возможностей требуется определенные лицензии."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64-разрядный",
- "thirtyTwoBit": "32-разрядный"
- },
- "TACSettings": {
- "edgeSettings": "Параметры конфигурации Microsoft Edge",
- "edgeWindowsDataProtectionSettings": "Параметры защиты данных Microsoft Edge (Windows) — предварительная версия",
- "edgeWindowsSettings": "Параметры конфигурации Microsoft Edge (Windows) — предварительная версия",
- "generalAppConfig": "Общая конфигурация приложений",
- "generalSettings": "Общие параметры конфигурации",
- "outlookSMIMEConfig": "Параметры S/MIME Outlook",
- "outlookSettings": "Параметры конфигурации Outlook",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Добавить границу сети",
- "addNetworkBoundaryButton": "Добавить границу сети...",
- "allowWindowsSearch": "Разрешить службе Windows Search искать зашифрованные данные предприятия и приложения Магазина",
- "authoritativeIpRanges": "Список диапазонов корпоративных IP-адресов является надежным (не вести автоматическое обнаружение)",
- "authoritativeProxyServers": "Список корпоративных прокси-серверов является надежным (не вести автоматическое обнаружение)",
- "boundaryType": "Тип границ",
- "cloudResources": "Облачные ресурсы",
- "corporateIdentity": "Удостоверение организации",
- "dataRecoveryCert": "Отправить сертификат агента восстановления данных (DRA), чтобы обеспечить расшифровку зашифрованных данных",
- "editNetworkBoundary": "Изменить границу сети",
- "enrollmentState": "Состояние регистрации",
- "iPv4Ranges": "Диапазоны IPv4-адресов",
- "iPv6Ranges": "Диапазоны IPv6-адресов",
- "internalProxyServers": "Внутренние прокси-серверы",
- "maxInactivityTime": "Максимальное количество времени (в минутах) при простое до блокировки устройства с помощью ПИН-кода или пароля",
- "maxPasswordAttempts": "Число неудачных попыток проверки подлинности до очистки устройства",
- "mdmDiscoveryUrl": "URL-адрес обнаружения MDM",
- "mdmRequiredSettingsInfo": "Эта политика применяется только к юбилейному обновлению Windows 10 и более поздним версиям. Она использует Windows Information Protection (WIP), чтобы применить защиту.",
- "minimumPinLength": "Задать минимальное число символов для ПИН-кода",
- "name": "Имя",
- "networkBoundariesGridEmptyText": "Здесь будут показаны все границы сети, которые вы добавите.",
- "networkBoundary": "Граница сети",
- "networkDomainNames": "Сетевые домены",
- "neutralResources": "Нейтральные ресурсы",
- "passportForWork": "Использовать Windows Hello для бизнеса для входа в Windows",
- "pinExpiration": "Укажите интервал времени (в днях), в течение которого можно использовать ПИН-код до того, как система потребует его изменить.",
- "pinHistory": "Укажите число запрещенных к использованию предыдущих значений ПИН-кода, связываемых с учетной записью пользователя",
- "pinLowercaseLetters": "Настроить использование строчных букв в ПИН-коде Windows Hello для бизнеса.",
- "pinSpecialCharacters": "Настроить использование специальных символов в ПИН-коде Windows Hello для бизнеса.",
- "pinUppercaseLetters": "Настроить использование прописных букы в ПИН-коде Windows Hello для бизнеса.",
- "protectUnderLock": "Препятствовать доступу приложений к данным предприятия, если устройство заблокировано. Применимо только к Windows 10 Mobile",
- "protectedDomainNames": "Защищенные домены",
- "proxyServers": "Прокси-серверы",
- "requireAppPin": "Отключить ПИН-код приложения, если ПИН-код устройства управляемый",
- "requiredSettings": "Обязательные параметры",
- "requiredSettingsInfo": "Изменение области или удаление этой политики приведет к расшифровке корпоративных данных.",
- "revokeOnMdmHandoff": "Отозвать доступ к защищенным данным при регистрации устройства в MDM",
- "revokeOnUnenroll": "Отзывать ключи шифрования при отмене регистрации",
- "rmsTemplateForEdp": "Укажите идентификатор шаблона, который следует использовать для Azure RMS.",
- "showWipIcon": "Показать значок защиты корпоративных данных",
- "type": "Тип",
- "useRmsForWip": "Использовать Azure RMS для WIP",
- "value": "Значение",
- "weRequiredSettingsInfo": "Эта политика применяется только к обновлению Windows 10 Creators Update или более поздним версиям. Она использует Windows Information Protection (WIP) и Windows MAM, чтобы применить защиту.",
- "wipProtectionMode": "Режим защиты Windows Information Protection",
- "withEnrollment": "С регистрацией",
- "withoutEnrollment": "Без регистрации"
+ "Platform": {
+ "all": "Все",
+ "android": "Администратор устройств Android",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Общий",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS и Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Неизвестно",
+ "unsupported": "Не поддерживается",
+ "windows": "Windows",
+ "windows10": "Windows 10 и более поздних версий",
+ "windows10CM": "Windows 10 и более поздней версии (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 для совместной работы",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 и более поздней версии",
+ "windows8And10": "Windows 8 и 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 и более поздних версий",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 и Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 и более поздней версии (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Компьютер с Windows"
+ },
+ "InstallIntent": {
+ "available": "Доступно для зарегистрированных устройств",
+ "availableWithoutEnrollment": "Доступно с регистрацией или без регистрации",
+ "required": "Обязательно",
+ "uninstall": "Удалить"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Фильтр",
+ "noFilters": "Нет"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Автор",
- "template": "Имя шаблона"
- },
- "Row": {
- "ariaLabel": "строка {0} из {1} столбца {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Начните с нуля и выберите нужные свойства в библиотеке доступных свойств инвентаризации"
- },
- "SettingsCatalog": {
- "subtitle": "Начните с нуля и выберите нужные параметры в библиотеке доступных параметров",
- "title": "Каталог параметров"
- },
- "Templates": {
- "subtitle": "Шаблоны содержат группы параметров, упорядоченные по функциональным возможностям. Используйте шаблон, если вы не хотите создавать политики вручную или хотите предоставить устройствам доступ к корпоративным сетям, например настроив Wi-Fi или VPN.",
- "title": "Шаблоны"
- },
- "noData": "Шаблоны политики не найдены."
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Настольный клиент Project Online",
- "visioProRetail": "Visio Online Plan 2"
- },
- "Countries": {
- "ae": "ОАЭ",
- "ag": "Антигуа и Барбуда",
- "ai": "Ангилья",
- "al": "Албания",
- "am": "Армения",
- "ao": "Ангола",
- "ar": "Аргентина",
- "at": "Австрия",
- "au": "Австралия",
- "az": "Азербайджан",
- "bb": "Барбадос",
- "be": "Бельгия",
- "bf": "Буркина-Фасо",
- "bg": "Болгария",
- "bh": "Бахрейн",
- "bj": "Бенин",
- "bm": "Бермуды",
- "bn": "Бруней-Даруссалам",
- "bo": "Боливия",
- "br": "Бразилия",
- "bs": "Багамы",
- "bt": "Бутан",
- "bw": "Ботсвана",
- "by": "Беларусь",
- "bz": "Белиз",
- "ca": "Канада",
- "cg": "Республика Конго",
- "ch": "Швейцария",
- "cl": "Чили",
- "cn": "Китай",
- "co": "Колумбия",
- "cr": "Коста-Рика",
- "cv": "Кабо-Верде",
- "cy": "Кипр",
- "cz": "Чешская Республика",
- "de": "Германия",
- "dk": "Дания",
- "dm": "Доминика",
- "do": "Доминиканская Республика",
- "dz": "Алжир",
- "ec": "Эквадор",
- "ee": "Эстония",
- "eg": "Египет",
- "es": "Испания",
- "fi": "Финляндия",
- "fj": "Фиджи",
- "fm": "Федеративные Штаты Микронезии",
- "fr": "Франция",
- "gb": "Соединенное Королевство",
- "gd": "Гренада",
- "gh": "Гана",
- "gm": "Гамбия",
- "gr": "Греция",
- "gt": "Гватемала",
- "gw": "Гвинея-Бисау",
- "gy": "Гайана",
- "hk": "Гонконг",
- "hn": "Гондурас",
- "hr": "Хорватия",
- "hu": "Венгрия",
- "id": "Индонезия",
- "ie": "Ирландия",
- "il": "Израиль",
- "in": "Индия",
- "is": "Исландия",
- "it": "Италия",
- "jm": "Ямайка",
- "jo": "Иордания",
- "jp": "Япония",
- "ke": "Кения",
- "kg": "Киргизия",
- "kh": "Камбоджа",
- "kn": "Сент-Китс и Невис",
- "kr": "Республика Корея",
- "kw": "Кувейт",
- "ky": "Острова Кайман",
- "kz": "Казахстан",
- "la": "Лаосская Народно-Демократическая Республика",
- "lb": "Ливан",
- "lc": "Сент-Люсия",
- "lk": "Шри-Ланка",
- "lr": "Либерия",
- "lt": "Литва",
- "lu": "Люксембург",
- "lv": "Латвия",
- "md": "Республика Молдова",
- "mg": "Мадагаскар",
- "mk": "Северная Македония",
- "ml": "Мали",
- "mn": "Монголия",
- "mo": "Макао",
- "mr": "Мавритания",
- "ms": "Монтсеррат",
- "mt": "Мальта",
- "mu": "Маврикий",
- "mw": "Малави",
- "mx": "Мексика",
- "my": "Малайзия",
- "mz": "Мозамбик",
- "na": "Намибия",
- "ne": "Нигер",
- "ng": "Нигерия",
- "ni": "Никарагуа",
- "nl": "Нидерланды",
- "no": "Норвегия",
- "np": "Непал",
- "nz": "Новая Зеландия",
- "om": "Оман",
- "pa": "Панама",
- "pe": "Перу",
- "pg": "Папуа — Новая Гвинея",
- "ph": "Филиппины",
- "pk": "Пакистан",
- "pl": "Польша",
- "pt": "Португалия",
- "pw": "Палау",
- "py": "Парагвай",
- "qa": "Катар",
- "ro": "Румыния",
- "ru": "Россия",
- "sa": "Саудовская Аравия",
- "sb": "Соломоновы Острова",
- "sc": "Сейшелы",
- "se": "Швеция",
- "sg": "Сингапур",
- "si": "Словения",
- "sk": "Словакия",
- "sl": "Сьерра-Леоне",
- "sn": "Сенегал",
- "sr": "Суринам",
- "st": "Сан-Томе и Принсипи",
- "sv": "Эль-Сальвадор",
- "sz": "Свазиленд",
- "tc": "о-ва Тёркс и Кайкос",
- "td": "Чад",
- "th": "Таиланд",
- "tj": "Таджикистан",
- "tm": "Туркменистан",
- "tn": "Тунис",
- "tr": "Турция",
- "tt": "Тринидад и Тобаго",
- "tw": "Тайвань",
- "tz": "Танзания",
- "ua": "Украина",
- "ug": "Уганда",
- "us": "США",
- "uy": "Уругвай",
- "uz": "Узбекистан",
- "vc": "Сент-Винсент и Гренадины",
- "ve": "Венесуэла",
- "vg": "Виргинские о-ва (Великобритания)",
- "vn": "Вьетнам",
- "ye": "Йемен",
- "za": "ЮАР",
- "zw": "Зимбабве"
- },
- "OfficeUpdateChannel": {
- "current": "Текущий канал",
- "deferred": "Полугодовой канал (корпоративный)",
- "firstReleaseCurrent": "Текущий канал (предварительная версия)",
- "firstReleaseDeferred": "Полугодовой канал (предварительная корпоративная версия)",
- "monthlyEnterprise": "Ежемесячный канал Enterprise",
- "placeHolder": "Выберите один вариант"
- },
- "AppProtection": {
- "allAppTypes": "Предназначены для всех типов приложений",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Приложения в рабочем профиле Android",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Приложения на выделенных устройствах Android Enterprise с общим режимом Microsoft Entra",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Приложения на устройствах Android с открытым кодом, связанные с пользователями",
- "appsOnAndroidOpenSourceProjectUserless": "Приложения на устройствах Android с открытым кодом, не связанные с пользователями",
- "appsOnIntuneManagedDevices": "Приложения на управляемых устройствах Intune",
- "appsOnUnmanagedDevices": "Приложения на неуправляемых устройствах",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "MAC-адрес",
- "notAvailable": "Недоступно",
- "windows10PlatformLabel": "Windows 10 и более поздних версий",
- "withEnrollment": "С регистрацией",
- "withoutEnrollment": "Без регистрации"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Встроенная роль",
- "customCloudPCRole": "Настраиваемая роль Windows 365",
- "customIntuneRole": "Настраиваемая роль Intune",
- "customRole": "Настраиваемая роль"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} включено как минимум в один набор политик. Если вы удалите {0}, вы больше не сможете назначать его через эти наборы. Все равно удалить?",
- "contentWithError": "{0}, возможно, включено как минимум в один набор политик. Если вы удалите {0}, вы больше не сможете назначать его через эти наборы. Все равно удалить?",
- "header": "Вы действительно хотите удалить это ограничение?"
- },
- "DeviceLimit": {
- "description": "Укажите максимальное число устройств, которые может зарегистрировать пользователь.",
- "header": "Ограничения числа устройств",
- "info": "Определяет, сколько устройств может зарегистрировать каждый пользователь."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Должна использоваться версия 1.0 или более поздняя.",
- "android": "Введите допустимый номер версии. Например, 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Введите допустимый номер версии. Например, 5.0, 5.1.1",
- "iOS": "Введите допустимый номер версии. Например, 9.0, 10.0, 9.0.2",
- "mac": "Введите допустимый номер версии. Примеры: 10, 10.10, 10.10.1",
- "min": "Минимум не может быть меньше {0}",
- "minMax": "Минимальная версия не может быть больше максимальной.",
- "windows": "Требуется 10.0 или более поздняя версия. Оставьте поле пустым, чтобы разрешить устройства с версией 8.1.",
- "windowsMobile": "Требуется 10.0 или более поздняя версия. Оставьте поле пустым, чтобы разрешить устройства с версией 8.1."
- },
- "allPlatformsBlocked": "Все платформы устройств заблокированы. Разрешите регистрацию платформ, чтобы включить их конфигурацию.",
- "blockManufacturerPlaceHolder": "Имя изготовителя",
- "blockManufacturersHeader": "Заблокированные производители",
- "cannotRestrict": "Ограничение не поддерживается",
- "configurationDescription": "Укажите ограничения конфигурации платформы, которые должны быть соблюдены при регистрации устройства. Для ограничения устройств после регистрации используйте политики соответствия. Формат версии: основная.дополнительная.сборка. Ограничения версии относятся только к устройствам, зарегистрированным на корпоративном портале. Intune по умолчанию классифицирует устройства как находящиеся в личном владении. Для их классификации как корпоративных нужны дополнительные действия.",
- "configurationDescriptionLabel": "Дополнительные сведения о настройке ограничений регистрации",
- "configurations": "Настройка платформ",
- "deviceManufacturer": "Производитель устройства",
- "header": "Ограничения по типу устройств",
- "info": "Определяет, какие платформы, версии и типы управления можно регистрировать.",
- "manufacturer": "Производитель",
- "max": "Макс.",
- "maxVersion": "Максимальная версия",
- "min": "Min",
- "minVersion": "Минимальная версия",
- "newPlatforms": "Вы разрешили использование новых платформ. При необходимости обновите конфигурации платформ.",
- "personal": "Личные",
- "platform": "Платформа",
- "platformDescription": "Вы можете разрешить регистрацию для следующих платформ. Блокируйте только те платформы, которые не будете поддерживать. Для разрешенных платформ можно настроить дополнительные ограничения развертывания.",
- "platformSettings": "Параметры платформы",
- "platforms": "Выбор платформ",
- "platformsSelected": "Выбрано платформ: {0}",
- "type": "Тип",
- "versions": "версии",
- "versionsRange": "Разрешите диапазон минимальных и максимальных значений:",
- "windowsTooltip": "Ограничивает регистрацию через Управление мобильными устройствами. Установка с использованием агента для ПК не ограничивается. Поддерживаются только версии Windows 10 и Windows 11. Чтобы разрешить Windows 8.1, оставьте поле версий пустым."
- },
- "Priority": {
- "saved": "Приоритеты ограничений успешно сохранены."
- },
- "Row": {
- "announce": "Приоритет: {0}, имя: {1}, назначено: {2}"
- },
- "Table": {
- "deployed": "Развернуто",
- "name": "Имя",
- "priority": "Приоритет"
- },
- "Type": {
- "limit": "Ограничение на число устройств",
- "type": "Ограничение на типы устройств"
- },
- "allUsers": "Все пользователи",
- "androidRestrictions": "Ограничения Android",
- "create": "Создать ограничение",
- "defaultLimitDescription": "Это — ограничение на максимальное число устройств по умолчанию, применяемое с наименьшим приоритетом ко всем пользователям вне зависимости от группы.",
- "defaultTypeDescription": "Это — ограничение на тип устройств по умолчанию, применяемое с наименьшим приоритетом ко всем пользователям вне зависимости от группы.",
- "defaultWhfbDescription": "Это конфигурация Windows Hello для бизнеса по умолчанию, применяемая с наименьшим приоритетом ко всем пользователям вне зависимости от группы.",
- "deleteMessage": "На затронутых пользователей будет распространяться следующее ограничение с самым высоким приоритетом или ограничение по умолчанию, если другие ограничения не назначены.",
- "deleteTitle": "Вы действительно хотите удалить ограничение {0}?",
- "descriptionHint": "Короткий текст, содержащий описание бизнес-использования или уровня ограничения, задаваемых параметрами ограничения.",
- "edit": "Изменить ограничение",
- "info": "Устройство должно соответствовать приоритетным ограничениям регистрации, назначенным его пользователю. Вы можете перетаскивать ограничения, чтобы изменять их приоритет. Ограничения по умолчанию имеют для всех пользователей самый низкий приоритет, и они предназначены для регистрации без пользователей. Вы можете редактировать ограничения по умолчанию, но не можете их удалять.",
- "iosRestrictions": "Ограничения iOS",
- "mDM": "MDM",
- "macRestrictions": "Ограничения macOS",
- "maxVersion": "Максимальная версия",
- "minVersion": "Минимальная версия",
- "nameHint": "Это основной видимый атрибут для идентификации набора ограничений.",
- "noAssignmentsStatusBar": "Назначьте ограничение по меньшей мере одной группе. Щелкните \"Свойства\".",
- "nonAdminForbiddenCreateError": "Для создания, изменения или удаления ограничений необходимо быть администратором службы Intune или глобальным администратором.",
- "nonAdminForbiddenEdit": "Для изменения ограничений необходимо быть администратором.",
- "notFound": "Ограничение не найдено. Возможно, оно уже удалено.",
- "personallyOwned": "Личные устройства",
- "restriction": "Ограничение",
- "restrictionLowerCase": "ограничение",
- "restrictionType": "Тип ограничения",
- "selectType": "Выбрать тип ограничения",
- "selectValidation": "Выберите платформу",
- "typeHint": "Выберите \"Ограничение на типы устройств\", чтобы ограничить их свойства. Выберите \"Ограничение на число устройств\", чтобы ограничить число устройств на пользователя.",
- "typeRequired": "Требуется тип ограничения.",
- "winPhoneRestrictions": "Ограничения Windows Phone",
- "windowsECv1Info": "Старые ограничения регистрации нельзя изменять или перераспределять. Их можно только удалять.",
- "windowsECv2Info": "Вы можете задать приоритет для ограничений регистрации, перетащив их. Просмотрите ограничения по умолчанию и предварительно настроенные ограничения ниже. Все новые ограничения регистрации будут иметь более высокий приоритет, чем стандартные и предварительно настроенные ограничения.",
- "windowsRestrictions": "Ограничения Windows",
- "windowsRestrictionsPreview": "Ограничения Windows на основе фильтров (предварительная версия)"
- },
- "InstallContextType": {
- "device": "Устройство",
- "deviceContext": "Контекст устройства",
- "user": "Пользователь",
- "userContext": "Контекст пользователя"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Описание",
- "placeholder": "Введите описание"
- },
- "NameTextBox": {
- "label": "Имя",
- "placeholder": "Ввод имени"
- },
- "PublisherTextBox": {
- "label": "Издатель",
- "placeholder": "Введите издателя"
- },
- "VersionTextBox": {
- "label": "Версия"
- },
- "headerDescription": "Создайте новый настраиваемый пакет сценариев на основе написанных вами сценариев обнаружения и исправления."
- },
- "ScopeTags": {
- "headerDescription": "Выберите группы для назначения пакета сценариев."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Сценарий обнаружения",
- "placeholder": "Введите текст сценария",
- "requiredValidationMessage": "Введите сценарий обнаружения"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Принудительно проверить подпись сценария"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Запуск сценария с использованием текущих учетных данных"
- },
- "RemediationScript": {
- "infoBox": "Этот сценарий будет выполняться в режиме только обнаружения, поскольку сценарий исправления отсутствует."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Сценарий исправления",
- "placeholder": "Введите текст сценария"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Запуск сценария в 64-разрядной версии PowerShell"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Недопустимый сценарий. Один или несколько символов, используемых в сценарии, являются недопустимыми."
- },
- "headerDescription": "Создание настраиваемого пакета сценариев на основе написанных сценариев. По умолчанию сценарии будут выполняться на назначенных устройствах каждый день.",
- "infoBox": "Этот скрипт доступен только для чтения. Возможно, некоторые параметры этого скрипта отключены."
- },
- "title": "Создание настраиваемого сценария",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Интервал",
- "time": "Дата и время"
- },
- "Interval": {
- "day": "Повторяется каждый день",
- "days": "Повторяется каждые {0} дн.",
- "hour": "Повторяется каждый час",
- "hours": "Повторять через каждые {0} часов",
- "month": "Повторяется каждый месяц",
- "months": "Повторяется каждые {0} мес.",
- "week": "Повторяется каждую неделю",
- "weeks": "Повторяется каждые {0} нед."
- },
- "Time": {
- "utc": "{0} (время в формате UTC)",
- "utcWithDate": "{0} (UTC) {1}",
- "withDate": "{0} {1}"
- }
- }
- },
- "Edit": {
- "title": "Изменить — {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Разрешенные URL-адреса",
- "tooltip": "Укажите сайты, разрешенные для доступа пользователей в рабочем контексте. Доступ к другим сайтам будет запрещен. Можно настроить либо список разрешенных, либо список заблокированных сайтов, но не оба одновременно. "
- },
- "ApplicationProxyRedirection": {
- "header": "Прокси приложения",
- "title": "Перенаправление прокси приложения",
- "tooltip": "Включите перенаправление прокси приложения, чтобы предоставить пользователям доступ к корпоративным ссылкам и локальным веб-приложениям."
- },
- "BlockedURLs": {
- "title": "Заблокированные URL-адреса",
- "tooltip": "Укажите сайты, заблокированные для доступа пользователей в рабочем контексте. Доступ к другим сайтам будет разрешен. Можно настроить либо список разрешенных, либо список заблокированных сайтов, но не оба одновременно. "
- },
- "Bookmarks": {
- "header": "Управляемые закладки",
- "tooltip": "Введите список URL-адресов с закладками, которые будут доступны пользователям при использовании Microsoft Edge в рабочем контексте.",
- "uRL": "URL-адрес"
- },
- "HomepageURL": {
- "header": "Управляемая домашняя страница",
- "title": "URL-адрес ярлыка домашней страницы",
- "tooltip": "Настройте ярлык домашней страницы, который будет первым значком, отображаемым под панелью поиска при открытии новой вкладки в Microsoft Edge"
- },
- "PersonalContext": {
- "label": "Перенаправление сайтов с ограниченным доступом в личный контекст",
- "tooltip": "Укажите, разрешено ли пользователям переходить в свой персональный контекст, чтобы открывать запрещенные сайты."
- }
- },
- "BooleanActions": {
- "allow": "Разрешить",
- "block": "Блокировать",
- "configured": "Настроено",
- "disable": "Отключить",
- "dontRequire": "Не требовать",
- "enable": "Включить",
- "hide": "Скрыть",
- "limit": "Ограничение",
- "notConfigured": "Не настроено",
- "require": "Требовать",
- "show": "Показать",
- "yes": "Да"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Сделать доступным для пользователей в качестве необязательного обновления",
- "optionalValue": "Необязательное",
- "required": "Сделать доступным для пользователей в качестве обязательного обновления",
- "requiredValue": "Обязательное"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 день",
- "twoDays": "2 дня",
- "zeroDays": "0 дней"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Обзор"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Поиск по устройству, пользователю или версии исправления."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Не удалось загрузить профили обновления ПО iOS"
- }
- },
- "SummaryBlade": {
- "subtitle": "Профиль обновления iOS",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "профиль"
- },
- "listLoadError": "Невозможно загрузить профили обновления программного обеспечения iOS. Повторите попытку позже.",
- "lowercase": "Политика обновления iOS",
- "uppercase": "Политика обновления iOS"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Не удается подключиться к Apple, чтобы получить список доступных версий. Приносим свои извинения. Повторите попытку позже или продолжайте использовать последнюю версию.",
- "latestUpdate": "Последнее обновление",
- "noLongerSupported": "Выбранная версия больше не поддерживается",
- "olderVersionSelected": "Поскольку вы выбрали более раннюю версию, убедитесь, что вы применяете политику ограничения устройств, которая откладывает видимость обновлений программного обеспечения, чтобы устройства не могли выполнить обновление до последней версии.",
- "prefix": "Установить iOS/iPadOS",
- "selectSupported": "Выберите версию обновления, поддерживаемую Apple",
- "updateToInstall": "Обновление для установки"
- },
- "Schedule": {
- "always": "Обновить при следующей синхронизации",
- "duringTimeWindows": "Обновить по расписанию",
- "header": "Если устройству назначена политика обновлений, по умолчанию Intune развертывает последние обновления при синхронизации устройства. Вы можете создать еженедельное расписание с настраиваемыми значениями времени начала и окончания. При установке обновлений не по расписанию Intune не будет развертывать обновления, пока время по расписанию не закончится.",
- "infoBalloon": "Когда будут выполнены обновления. Для планирования обновлений в течение запланированного времени или за его рамками необходимо указать дополнительные сведения.",
- "label": "Тип расписания",
- "outsideActiveHours": "Обновлять вне периода активности (для устаревших версий)",
- "outsideTimeWindows": "Обновить не по расписанию",
- "timeWindow": "Период времени",
- "timeZone": "Часовой пояс",
- "title": "Параметры расписания политики обновления:",
- "weekly": "Расписание по неделям",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "Версия iOS/iPadOS, которую необходимо установить на устройствах во время обновления.",
- "label": "Выберите версию для установки"
- },
- "header": "Создайте профиль, чтобы автоматически устанавливать последние обновления iOS/iPadOS на назначенные устройства. Эти параметры определяют способ и время развертывания обновлений программного обеспечения. Профиль не запрещает пользователям обновлять ОС вручную, однако в соответствии с политикой ограничения конфигурации устройств выполнение обновлений может быть запрещено на срок до 90 дней. Обновления будут применяться только к контролируемым устройствам.",
- "notAvailable": "Н/Д"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Отсутствуют политики обновления iOS для отображения",
- "macOsUpdates": "Отсутствуют политики обновления программного обеспечения macOS для отображения",
- "windowsUpdates": "Нет кругов обновления для Windows 10 и более поздних версий для отображения."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Имя устройства",
- "deviceUpdateStatus": "Состояние обновления устройств",
- "lastUpdated": "Последнее обновление",
- "osVersion": "Версия ОС",
- "userPrincipalName": "Имя пользователя"
- },
- "maximumOSVersionFilter": "Максимальная версия ОС",
- "minimumOSVersionFilter": "Минимальная версия ОС",
- "noData": "Нет данных для отображения.",
- "searchBoxPlaceholder": "Искать по имени устройства, имени пользователя или версии ОС",
- "title": "Сводка учетных записей для устройств с macOS"
- },
- "Category": {
- "configurationDataFile": "Файл данных конфигурации",
- "critical": "Критические",
- "firmware": "Встроенное ПО",
- "other": "Другой"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Последнее обновление",
- "successfulUpdateCount": "Успешно развернутые обновления",
- "totalUpdateCount": "Всего развернутых обновлений",
- "updateCategory": "Категория обновлений",
- "updateCategoryStatus": "Состояние категории обновлений"
- },
- "noData": "Нет данных для отображения."
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Не удалось загрузить профили обновления ПО macOS"
- }
- },
- "State": {
- "available": "Доступно",
- "commandFailed": "Произошел сбой команды",
- "downloadFailed": "Ошибка скачивания",
- "downloadInsufficientNetwork": "Недостаточно сетевых ресурсов для скачивания",
- "downloadInsufficientPower": "Недостаточно заряда аккумулятора для скачивания",
- "downloadInsufficientSpace": "Недостаточно места для скачивания",
- "downloaded": "Скачано",
- "downloading": "Идет скачивание",
- "idle": "Бездействие",
- "installFailed": "Сбой установки",
- "installInsufficientPower": "Недостаточно заряда аккумулятора для установки",
- "installInsufficientSpace": "Недостаточно места для установки",
- "installing": "Идет установка",
- "scheduled": "Внесен в план",
- "success": "Успех",
- "unknown": "Неизвестно"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Последнее обновление",
- "updateName": "Обновить имя",
- "updateStatus": "Состояние обновления",
- "version": "Версия"
- },
- "noData": "Нет данных для отображения.",
- "searchBoxPlaceholder": "Искать по названию или версии обновления"
- },
- "SummaryBlade": {
- "subtitle": "Профиль обновления macOS.",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Профиль"
- },
- "error": "Ошибка",
- "errorOrErrors": "Ошибки",
- "errors": "Ошибки",
- "listLoadError": "Невозможно загрузить профили обновления программного обеспечения macOS. Повторите попытку позже.",
- "lowercase": "политика обновления macOS",
- "other": "Другой",
- "subtitle": "Обновление программного обеспечения macOS",
- "upToDate": "Актуальное состояние",
- "uppercase": "Политика обновления macOS"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Повторите попытку позже",
- "title": "Не удалось удалить {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Повторите попытку позже"
- },
- "LoadConfigurationFailed": {
- "description": "Повторите попытку позже",
- "title": "Не удалось загрузить {0}"
- },
- "idWrongFormat": "Указанный идентификатор профиля имеет непредвиденный формат."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "Необходимо выбрать хотя бы один период времени.",
- "tooMany": "Можно настроить не более 20 периодов времени."
- }
- },
- "endDay": "День завершения",
- "endTime": "Время окончания",
- "startDay": "День начала",
- "startTime": "Время начала",
- "timeWindowError": "Выберите интервал времени, который длится не менее одного часа."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Не удалось загрузить профили кругов обновления для Windows 10 и более поздних версий."
- }
- },
- "SummaryBlade": {
- "subtitle": "Круг обновления для Windows 10 и более поздних версий",
- "title": "Центр обновления Windows для бизнеса"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 и более поздних версий",
- "title": "Круг обновления для Windows 10 и более поздних версий"
- },
- "listLoadError": "Невозможно загрузить профили кругов обновления для Windows 10. Повторите попытку позже",
- "lowercase": "Круг обновления",
- "uppercase": "Круг обновления"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Изменить настройки политики",
- "updateRingSettings": "Изменить параметры круга"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Создание {0}",
- "edit": "Изменить {0}"
- }
- },
- "notScannedYet": "Еще не проверено",
- "outOfDateIosDevices": "Устаревшие устройства с iOS"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Ограничения устройств (владелец устройства)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "Политика обновления iOS"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Равно",
+ "greaterThan": "Больше",
+ "greaterThanOrEqualTo": "Больше или равно",
+ "lessThan": "Меньше чем",
+ "lessThanOrEqualTo": "меньше чем или равно",
+ "notEqualTo": "не равно"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Принудительная проверка подписи сценария и автоматический запуск сценария",
+ "enforceSignatureCheckTooltip": "Выберите \"Да\", чтобы убедиться, что сценарий подписан доверенным издателем, что позволит выполнять сценарий без отображения предупреждений или запросов. Сценарий будет выполнен без блокировки. Выберите \"Нет\" (по умолчанию) для выполнения сценария с подтверждением конечного пользователя без проверки подписи.",
+ "header": "Использование настраиваемого сценария обнаружения",
+ "runAs32Bit": "Запуск сценария как 32-разрядного процесса на 64-разрядных клиентах",
+ "runAs32BitTooltip": "Выберите \"Да\", чтобы запустить сценарий в 32-разрядном процессе на 64-разрядных клиентах. Выберите \"Нет\" (по умолчанию), чтобы запустить сценарий в 64-разрядном процессе на 64-разрядных клиентах. 32-разрядные клиенты выполняют сценарий в 32-разрядном процессе.",
+ "scriptContent": "Содержимое сценария",
+ "scriptFile": "Файл сценария",
+ "scriptFileNotSelectedValidation": "Файл сценария не выбран.",
+ "scriptFileTooltip": "Выберите сценарий PowerShell, который будет определять наличие приложения на клиенте. Приложение обнаружено, если сценарий возвращает код выхода 0 и записывает строковое значение в STDOUT.",
+ "scriptSizeLimitValidation": "Размер сценария обнаружения превышает максимально допустимый. Устраните эту проблему, уменьшив размер сценария обнаружения."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Дата создания",
+ "dateModified": "Дата изменения",
+ "doesNotExist": "Файл или папка не существует.",
+ "fileOrFolderExists": "Файл или папка существует",
+ "sizeInMB": "Размер в МБ",
+ "version": "Строка (версия)"
+ },
+ "associatedWith32Bit": "Связанные с 32-разрядным приложением на 64-разрядных клиентах",
+ "associatedWith32BitTooltip": "Выберите \"Да\", чтобы развернуть все переменные среды PATH в 32-разрядном контексте на 64-разрядных клиентах. Выберите \"Нет\" (по умолчанию), чтобы развернуть все переменные среды PATH в 64-разрядном контексте на 64-разрядных клиентах. 32-разрядные клиенты всегда будут использовать 32-разрядный контекст.",
+ "detectionMethod": "Метод обнаружения",
+ "detectionMethodTooltip": "Выберите тип метода обнаружения, используемого для проверки наличия приложения.",
+ "fileOrFolder": "Файл или папка",
+ "fileOrFolderToolTip": "Файл или папка для обнаружения.",
+ "operator": "Оператор",
+ "operatorTooltip": "Выберите оператор для метода обнаружения, используемого для проверки сравнения.",
+ "path": "Путь",
+ "pathTooltip": "Полный путь к папке, содержащей файл или папку для обнаружения.",
+ "value": "Значение",
+ "valueTooltip": "Выберите значение, которое соответствует выбранному методу обнаружения. Методы обнаружения даты должны вводиться с использованием местного времени."
+ },
+ "GridColumns": {
+ "pathOrCode": "Путь/код",
+ "type": "Тип"
+ },
+ "MsiRule": {
+ "operator": "Оператор",
+ "operatorTooltip": "Выберите оператор для сравнения проверки версии продукта MSI.",
+ "productCode": "Код продукта MSI",
+ "productCodeTooltip": "Допустимый код продукта MSI для приложения.",
+ "productVersion": "Значение",
+ "productVersionCheck": "Проверка версии продукта MSI",
+ "productVersionCheckTooltip": "Выберите \"Да\", чтобы проверять версию продукта MSI в дополнение к коду продукта MSI.",
+ "productVersionTooltip": "Введите версию продукта MSI для приложения."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Сравнение целых чисел",
+ "keyDoesNotExist": "Раздел не существует",
+ "keyExists": "Раздел существует",
+ "stringComparison": "Сравнение строк",
+ "valueDoesNotExist": "Значение не существует",
+ "valueExists": "Значение существует",
+ "versionComparison": "Сравнение версий"
+ },
+ "associatedWith32Bit": "Связанные с 32-разрядным приложением на 64-разрядных клиентах",
+ "associatedWith32BitTooltip": "Выберите \"Да\", чтобы выполнить поиск в 32-разрядном реестре на 64-разрядных клиентах. Выберите \"Нет\" (по умолчанию), чтобы выполнить поиск в 64-разрядном реестре на 64-разрядных клиентах. 32-разрядные клиенты всегда будут выполнять поиск в 32-разрядном реестре.",
+ "detectionMethod": "Метод обнаружения",
+ "detectionMethodTooltip": "Выберите тип метода обнаружения, используемого для проверки наличия приложения.",
+ "keyPath": "Путь к разделу",
+ "keyPathTooltip": "Полный путь к записи реестра, содержащей значение для обнаружения.",
+ "operator": "Оператор",
+ "operatorTooltip": "Выберите оператор для метода обнаружения, используемого для проверки сравнения.",
+ "value": "Значение",
+ "valueName": "Имя параметра",
+ "valueNameTooltip": "Имя отслеживаемого значения реестра.",
+ "valueTooltip": "Выберите значение, которое соответствует выбранному методу обнаружения."
+ },
+ "RuleTypeOptions": {
+ "file": "Файл",
+ "mSI": "MSI",
+ "registry": "Реестр"
+ },
+ "gridAriaLabel": "Правила обнаружения",
+ "header": "Создайте правило, указывающее на наличие приложения.",
+ "noRulesSelectedPlaceholder": "Правила не указаны.",
+ "ruleTableLimit": "Можно добавить до 25 правил обнаружения.",
+ "ruleType": "Тип правила",
+ "ruleTypeTooltip": "Выберите тип добавляемого правила обнаружения."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Использование настраиваемого сценария обнаружения",
+ "manual": "Ручная настройка правил обнаружения"
+ },
+ "bladeTitle": "Правила обнаружения",
+ "header": "Настройте правила, определяемые приложением, используемые для обнаружения наличия приложения.",
+ "rulesFormat": "Формат правил",
+ "rulesFormatTooltip": "Выберите ручную настройку правил обнаружения или используйте настраиваемый сценарий для определения наличия приложения.",
+ "selectorLabel": "Правила обнаружения"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Принятие от имени пользователей условий лицензионного соглашения на использование программного обеспечения корпорации Майкрософт",
"appSuiteConfigurationLabel": "Конфигурация набора приложений",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "Выбрано языков: {0}.",
"xmlConfigurationLabel": "Конфигурация XML"
},
- "Filters": {
- "ruleSyntax": "Синтаксис правила",
- "filters": "Фильтры"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Разрешить пользователю менять настройку",
- "tooltip": "Укажите, разрешено ли пользователю менять настройку."
- },
- "AllowWorkAccounts": {
- "title": "Разрешение только рабочих и учебных учетных записей",
- "tooltip": " При включении этого параметра пользователи не смогут добавить личный адрес электронной почты и учетные записи хранения в Outlook. Если у пользователя добавлена в Outlook личная учетная запись, ему потребуется ее удалить. Если он этого не сделает, добавить рабочую или учебную учетную запись будет невозможно."
- },
- "BlockExternalImages": {
- "title": "Блокировка внешних изображений",
- "tooltip": "При блокировке внешних изображений приложение не позволит скачивать размещенные в Интернете изображения, встроенные в текст сообщения. Если не настроить эту функцию, по умолчанию она будет для приложения отключена."
- },
- "ConfigureEmail": {
- "title": "Параметры учетной записи электронной почты"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Подпись приложения по умолчанию указывает, будет ли приложение использовать \"Получить Outlook для Android\" в качестве подписи по умолчанию во время написания сообщения. Если параметр отключен, подпись по умолчанию не будет использоваться, однако пользователи могут добавить собственную подпись.\r\n\r\nЕсли задано значение \"Не настроено\", параметр приложения по умолчанию включен.",
- "iOS": "Подпись приложения по умолчанию указывает, будет ли приложение использовать \"Получить Outlook для iOS\" в качестве подписи по умолчанию во время написания сообщения. Если параметр отключен, подпись по умолчанию не будет использоваться, однако пользователи могут добавить собственную подпись.\r\n\r\nЕсли задано значение \"Не настроено\", параметр приложения по умолчанию включен."
- },
- "title": "Подпись приложения по умолчанию"
- },
- "OfficeFeedReplies": {
- "title": "Веб-канал обнаружения",
- "tooltip": "Веб-канал обнаружения отображает ваши самые часто используемые файлы Office. По умолчанию он включен, когда для пользователя включена служба Delve. Если не настроить канал, по умолчанию для приложения используется значение \"Включено\"."
- },
- "OrganizeMailByThread": {
- "title": "Сообщения в цепочках",
- "tooltip": "По умолчанию в Outlook используется режим объединения бесед в представление беседы с несколькими цепочками. Если этот параметр отключен, Outlook будет отображать все сообщения по отдельности и не будет группировать их по цепочкам."
- },
- "PlayMyEmails": {
- "title": "Воспроизвести мои письма",
- "tooltip": "По умолчанию функция \"Воспроизвести мои письма\" отключена в приложении, но доступна соответствующим пользователям в виде баннера в папке \"Входящие\". Если параметру задано значение \"Отключено\", функция будет недоступна соответствующим пользователям в приложении. Пользователи могут вручную включить эту функцию в приложении, даже если она отключена. Если параметру задано значение \"Не настроено\", по умолчанию используется значение параметра \"Включено\", и функция будет доступна соответствующим пользователям."
- },
- "SuggestedReplies": {
- "title": "Предлагаемые ответы",
- "tooltip": "Outlook может предлагать варианты ответов в нижней части при открытии сообщения. Выбрав предложенный ответ, вы можете изменить его перед отправкой."
- },
- "SyncCalendars": {
- "title": "Синхронизация календарей",
- "tooltip": "Укажите, могут ли пользователи синхронизировать свой календарь Outlook с собственным приложением календаря и базой данных."
- },
- "TextPredictions": {
- "title": "Прогнозирование текста",
- "tooltip": "Outlook может предлагать слова и фразы при создании сообщений. Если Outlook предлагает вариант, проведите, чтобы принять его. Если задано значение \"Не настроено\", используется параметр приложения по умолчанию со значением \"Включено\"."
- },
- "ThemesEnabled": {
- "title": "Темы включены",
- "tooltip": "Укажите, разрешено ли пользователю применять настраиваемую визуальную тему."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "Устройства ChromeOS"
- },
- "ManagedDesktop": {
- "adminContacts": "Контакты администратора",
- "appPackaging": "Упаковка приложений",
- "autopatchGroups": "Группы автоисправления",
- "devices": "Устройства",
- "featureEnablement": "Активация возможностей",
- "feedback": "Отзывы и предложения",
- "gettingStarted": "Приступая к работе",
- "messages": "Сообщения",
- "onlineResources": "Интернет-ресурсы",
- "policyHealth": "Работоспособность политики",
- "policyHealthPreview": "Работоспособность политики (предварительная версия)",
- "releaseManagement": "Управление выпусками",
- "serviceRequests": "Запросы на обслуживание",
- "settings": "Параметры",
- "supportRequests": "Запросы в службу поддержки",
- "tenantEnrollment": "Регистрация клиента",
- "tenantManagement": "Управление клиентами"
- },
- "actions": "Действия для несоответствия",
- "advancedExchangeSettings": "Параметры Exchange Online",
- "advancedThreatProtection": "Microsoft Defender для конечной точки",
- "allApps": "Все приложения",
- "allDevices": "Все устройства",
- "androidFotaDeployments": "Развертывания Android FOTA",
- "appBundles": "Пакеты приложений",
- "appCategories": "Категории приложений",
- "appConfigPolicies": "Политики конфигурации приложений",
- "appConfigurationStatus": "Состояние конфигурации приложений",
- "appInstallStatus": "Состояние установки приложения",
- "appLicences": "Лицензии на приложения",
- "appProtectionPolicies": "Политики защиты приложений",
- "appProtectionStatus": "Состояние защиты приложений",
- "appSelectiveWipe": "Выборочная очистка приложений",
- "appleVppTokens": "Токены Apple VPP",
- "apps": "Приложения",
- "assign": "Назначения",
- "assignedPermissions": "Назначенные разрешения",
- "assignedRoles": "Назначенные роли",
- "autopilotDeploymentReport": "Развертывания Autopilot (предварительная версия)",
- "autopilotDeploymentReportV2": "Развертывание Autopilot 2.0 (предварительная версия)",
- "brandingAndCustomization": "Настройка",
- "cartProfiles": "Профили для покупок",
- "certificateConnectors": "Соединители сертификатов",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Устройства с присоединением к облаку (предварительная версия)",
- "cloudPcActions": "Действия облачного компьютера (предварительная версия)",
- "cloudPcMaintenanceWindows": "Периоды обслуживания облачного компьютера (предварительная версия)",
- "compliancePolicies": "Политики соответствия",
- "complianceScriptManagement": "Сценарии",
- "complianceScriptManagementPreview": "Сценарии (предварительная версия)",
- "complianceSettings": "Параметры политики соответствия",
- "conditionStatements": "Условные операторы",
- "conditions": "Расположения",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Профили конфигурации",
- "configurationScripts": "Сценарии конфигурации",
- "connectorsAndTokens": "Соединители и токены",
- "corporateDeviceIdentifiers": "Идентификаторы корпоративных устройств",
- "customAttributes": "Настраиваемые атрибуты",
- "customNotifications": "Настраиваемые уведомления",
- "deploymentSettings": "Параметры развертывания",
- "derivedCredentials": "Производные учетные данные",
- "deviceActions": "Действия устройства",
- "deviceCategories": "Категории устройств",
- "deviceCleanUp": "Правила очистки устройств",
- "deviceEnrollmentManagers": "Менеджеры регистрации устройств",
- "deviceExecutionStatus": "Состояние устройства",
- "deviceLimitEnrollmentRestrictions": "Ограничения количества устройств для регистрации",
- "deviceTypeEnrollmentRestrictions": "Ограничения количества устройств платформы для регистрации",
- "devices": "Устройства",
- "discoveredApps": "Обнаруженные приложения",
- "edgePolicies": "Политики для Microsoft Edge",
- "embeddedSIM": "Профили сотовой связи eSIM (предварительная версия)",
- "enrollDevices": "Регистрация устройств",
- "enrollmentFailures": "Сбои регистрации",
- "enrollmentNotifications": "Уведомления о регистрации (предварительная версия)",
- "enrollmentRestrictions": "Ограничения регистрации",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Соединители сервисов Exchange",
- "failuresForCumulativeQualityUpdates": "Сбои накопительных исправлений Windows",
- "failuresForDriverUpdates": "Сбои обновления драйверов Windows",
- "failuresForFeatureUpdates": "Сбои при обновлении компонентов",
- "failuresForQualityUpdates": "Ошибки ускоренного обновления Windows",
- "featureFlighting": "Фокус-тестирование функций",
- "featureUpdateDeployments": "Обновление компонентов для Windows 10 и более поздних версий",
- "flighting": "Фокус-тестирование",
- "fotaUpdate": "Обновление по воздуху для встроенного ПО",
- "groupPolicy": "Административные шаблоны",
- "groupPolicyAnalytics": "Анализ групповой политики",
- "helpSupport": "Справка и поддержка",
- "helpSupportReplacement": "Справка и поддержка ({0})",
- "iOSAppProvisioning": "Профили подготовки приложений iOS",
- "incompleteUserEnrollments": "Неполные регистрации пользователей",
- "iosUpdates": "Политики обновления для iOS/iPadOS",
- "legacyPcManagement": "Традиционное управление ПК",
- "macOSSoftwareUpdate": "Политики обновления для macOS",
- "macOSSoftwareUpdateAccountSummaries": "Состояние установки для устройств с macOS",
- "macOSSoftwareUpdateCategorySummaries": "Сводка обновлений ПО",
- "macOSSoftwareUpdateStateSummaries": "обновления",
- "managedGooglePlay": "Управляемый Google Play",
- "msfb": "Магазин Майкрософт для бизнеса",
- "myPermissions": "Мои разрешения",
- "notifications": "Уведомления",
- "officeApps": "Приложения Office",
- "officeProPlusPolicies": "Политики для приложений Office",
- "onPremise": "Локальные",
- "onPremisesConnector": "Локальный соединитель Exchange ActiveSync",
- "onPremisesDeviceAccess": "Устройства Exchange ActiveSync",
- "onPremisesManageAccess": "Локальный доступ к Exchange",
- "outOfDateIosDevices": "Ошибки установки для устройств с iOS",
- "overview": "Обзор",
- "partnerDeviceManagement": "Управление партнерскими устройствами",
- "perUpdateRingDeploymentState": "По состоянию развертывания кольца обновления",
- "permissions": "Разрешения",
- "platformApps": "Приложений: {0}",
- "platformDevices": "Устройств: {0}",
- "platformEnrollment": "Регистрация {0}",
- "policies": "Политики",
- "profiles": "Профили",
- "properties": "Свойства",
- "reports": "Отчеты",
- "retireNoncompliantDevices": "Прекращение использования несоответствующих устройств",
- "retireNoncompliantDevicesPreview": "Прекращение использования несоответствующих устройств (предварительная версия)",
- "role": "Роль",
- "scriptManagement": "Сценарии",
- "securityBaselines": "Базовые показатели безопасности",
- "serviceToServiceConnector": "Соединитель Exchange Online",
- "servicenowConnector": "Соединитель ServiceNow",
- "shellScripts": "Скрипты оболочки",
- "teamViewerConnector": "Соединитель TeamViewer",
- "telecomeExpenseManagement": "Управление затратами на телекоммуникации",
- "tenantAdmin": "Администратор клиента",
- "tenantAdministration": "Администрирование клиента",
- "termsAndConditions": "Условия",
- "titles": "Названия",
- "troubleshoot": "Устранение неполадок",
- "troubleshootSupport": "Устранение неполадок и поддержка",
- "user": "Пользователь",
- "userExecutionStatus": "Состояние пользователя",
- "wdacSupplementalPolicies": "Дополнительные политики режима S",
- "win32CatalogUpdateApp": "Обновления для приложений управления корпоративными приложениями",
- "win32CatalogUpdateAppInPreview": "Обновления для приложений каталога Windows (Win32) (предварительная версия)",
- "windows10DriverUpdate": "Обновления драйверов для Windows 10 и более поздних версий",
- "windows10QualityUpdate": "Исправления для Windows 10 и более поздних версий",
- "windows10UpdateRings": "Круги обновления для Windows 10 и более поздних версий",
- "windows10XPolicyFailures": "Сбои политики Windows 10X",
- "windows365PartnerConnector": "Соединители партнеров Windows 365",
- "windowsDiagnosticData": "Данные Windows",
- "windowsEnterpriseCertificate": "Сертификат Windows Корпоративная",
- "windowsManagement": "Сценарии",
- "windowsSideLoadingKeys": "Ключи загрузки неопубликованных приложений Windows",
- "windowsSymantecCertificate": "Сертификат Windows DigiCert",
- "windowsThreatReport": "Состояние агента угроз"
- },
- "ScopeTypes": {
- "allDevices": "Все устройства",
- "allUsers": "Все пользователи",
- "allUsersAndDevices": "Все пользователи и все устройства",
- "selectedGroups": "Выбранные группы"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Поиск (Майкрософт) по умолчанию",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype для бизнеса",
- "oneDrive": "Классическое приложение OneDrive",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone и iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Не поддерживается",
+ "supportEnding": "Завершение поддержки",
+ "supported": "Поддерживается"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "По умолчанию",
- "header": "Приоритет обновления",
- "postponed": "Отложено",
- "priority": "Высокий приоритет"
- },
- "AutoUpdateSupersededApps": {
- "label": "Автоматическое обновление",
- "sublabel": "Если замененные приложения были установлены пользователем с корпоративного портала, необходимо установить заменяемое приложение."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Фон",
- "displayText": "Скачивание содержимого в {0}",
- "foreground": "Передний план",
- "header": "Приоритет оптимизации доставки"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Разрешить пользователю отложить уведомление о перезапуске",
- "countdownDialog": "Выберите, когда следует отображать диалоговое окно обратного отсчета перед перезапуском (в минутах)",
- "durationInMinutes": "Льготный период для перезапуска устройства (в минутах)",
- "snoozeDurationInMinutes": "Выберите, на сколько отложить (в минутах)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Часовой пояс",
- "local": "Часовой пояс устройства",
- "utc": "Время в формате UTC"
- },
- "dateAndTimeLabel": "Дата и время",
- "deadlineTimeColumnLabel": "Крайний срок установки",
- "deadlineTimeDatePickerErrorMessage": "Выбранная дата окончания должна следовать за доступной датой.",
- "deadlineTimeLabel": "Крайний срок установки приложения",
- "defaultTime": "Как можно скорее",
- "infoText": "Это приложение будет доступно сразу после развертывания, если не указано время доступности ниже. Если это обязательное приложение, можно указать крайний срок установки.",
- "specificTime": "Конкретные дата и время",
- "startTimeColumnLabel": "Доступность",
- "startTimeDatePickerErrorMessage": "Выбранная дата должна предшествовать дате крайнего срока.",
- "startTimeLabel": "Доступность приложения"
- },
- "restartGracePeriodHeader": "Льготный период для перезапуска",
- "restartGracePeriodLabel": "Льготный период для перезапуска устройства",
- "summaryTitle": "Взаимодействие с пользователем"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "Файл или папка в качестве выбранного требования.",
- "pathToolTip": "Полный путь к файлу или папке для обнаружения.",
- "property": "Свойство",
- "valueToolTip": "Выберите значение требования, соответствующее выбранному методу обнаружения. Дату и время требования необходимо указать в локальном формате."
- },
- "GridColumns": {
- "pathOrScript": "Путь или сценарий",
- "type": "Тип"
- },
- "Registry": {
- "keyPath": "Путь к разделу",
- "keyPathTooltip": "Полный путь к записи реестра, содержащей значение требования.",
- "operator": "Operator",
- "operatorTooltip": "Выберите оператор для сравнения.",
- "registryRequirement": "Требование для ключа реестра",
- "registryRequirementTooltip": "Выберите сравнение для требования ключа реестра.",
- "valueName": "Имя параметра",
- "valueNameTooltip": "Имя требуемого значения реестра."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Автоматическое утверждение всех рекомендуемых обновления драйверов",
+ "manual": "Ручное утверждение и развертывание обновлений драйверов"
+ },
+ "BulkActions": {
+ "button": "Массовые действия"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Метод утверждения:"
},
- "RequirementTypeOptions": {
- "fileType": "Файл",
- "registry": "Реестр",
- "script": "Скрипт"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Логический",
- "dateTime": "Дата и время",
- "float": "С плавающей запятой",
- "integer": "Целое число",
- "string": "Строка",
- "version": "Версия"
- },
- "duplicateName": "Имя сценария {0} уже используется. Введите другое имя.",
- "enforceSignatureCheck": "Принудительно проверить подпись сценария",
- "enforceSignatureCheckTooltip": "Выберите \"Да\", чтобы проверить, что сценарий подписан доверенным издателем, что позволит выполнять сценарий без отображения предупреждений или запросов. Сценарий будет выполнен без блокировки. Выберите \"Нет\" (по умолчанию), чтобы сценарий выполнялся с выдачей запроса на подтверждение пользователю, но без проверки подписи.",
- "loggedOnCredentials": "Запускать сценарий по учетным данным",
- "loggedOnCredentialsTooltip": "Запустите сценарий с использованием учетных данных устройства, использованных при входе.",
- "operatorTooltip": "Выберите оператор для сравнения требований.",
- "requirementMethod": "Выберите тип выходных данных.",
- "requirementMethodTooltip": "Выберите тип данных, используемый при определении соответствия требованию.",
- "scriptContent": "Содержимое сценария",
- "scriptFile": "Файл скрипта",
- "scriptFileTooltip": "Выберите сценарий PowerShell, который будет определять наличие приложения на клиенте. Если приложение обнаружено, процесс обнаружения возвратит нулевой код выхода и запишет строковое значение в стандартный поток вывода.",
- "scriptName": "Имя скрипта",
- "value": "Значение",
- "valueTooltip": "Выберите значение требования, соответствующее выбранному методу обнаружения. Дату и время требования необходимо указать в локальном формате."
+ "DeploymentDeferralInDays": {
+ "label": "Сделать обновления доступными после",
+ "units": "(дн.)",
+ "value": "{0} дн."
+ },
+ "DriverAction": {
+ "header": "Выберите действие ниже.",
+ "label": "Действие драйвера",
+ "placeholder": "Выберите действие"
},
- "bladeTitle": "Добавление правила требований",
- "createRequirementHeader": "Создание требования",
- "header": "Настройка дополнительных правил требований",
- "label": "Правила дополнительных требований",
- "noRequirementsSelectedPlaceholder": "Требования не указаны.",
- "requirementType": "Тип требования",
- "requirementTypeTooltip": "Выберите тип метода обнаружения, используемого для определения того, как будет проверяться требование."
- },
- "architectures": "Архитектура операционной системы",
- "architecturesTooltip": "Выберите архитектуры, необходимые для установки приложения.",
- "bladeTitle": "Требования",
- "diskSpace": "Требуется места на диске (МБ)",
- "diskSpaceTooltip": "Свободное дисковое пространство на системном диске, необходимое для установки приложения.",
- "header": "Укажите требования, которым должны соответствовать устройства до установки приложения:",
- "maximumTextFieldValue": "Максимальное значение — {0}.",
- "minimumCpuSpeed": "Минимальная требуемая частота ЦП (МГц)",
- "minimumCpuSpeedTooltip": "Минимальная частота ЦП, необходимая для установки приложения.",
- "minimumLogicalProcessors": "Минимальное требуемое число логических процессоров",
- "minimumLogicalProcessorsTooltip": "Минимальное число логических процессоров, необходимое для установки приложения.",
- "minimumOperatingSystem": "Минимальная версия операционной системы",
- "minimumOperatingSystemTooltip": "Выберите минимальную версию операционной системы, необходимую для установки приложения.",
- "minumumTextFieldValue": "Значение должно быть не менее {0}.",
- "physicalMemory": "Необходимый объем физической памяти (МБ)",
- "physicalMemoryTooltip": "Физическая память (ОЗУ), необходимая для установки приложения.",
- "selectorLabel": "Требования",
- "validNumber": "Введите допустимое число."
- },
- "PolicySet": {
- "appManagement": "Управление приложениями",
- "assignments": "Назначения",
- "basics": "Основные",
- "deviceEnrollment": "Регистрация устройства",
- "deviceManagement": "Управление устройствами",
- "scopeTags": "Теги области",
- "appConfigurationTitle": "Политики конфигурации приложений",
- "appProtectionTitle": "Политики защиты приложений",
- "appTitle": "Приложения",
- "iOSAppProvisioningTitle": "Профили подготовки приложений iOS",
- "deviceLimitRestrictionTitle": "Ограничения числа устройств",
- "deviceTypeRestrictionTitle": "Ограничения по типу устройств",
- "enrollmentStatusSettingTitle": "Страницы состояния регистрации",
- "windowsAutopilotDeploymentProfileTitle": "Профили развертывания Windows Autopilot",
- "deviceComplianceTitle": "Политики соответствия устройств",
- "deviceConfigurationTitle": "Профили конфигурации устройств",
- "powershellScriptTitle": "Сценарии PowerShell"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Включенные драйверы"
+ },
+ "SelectDrivers": {
+ "header": "Выберите водителей для включения в массовое действие"
+ },
+ "SelectDriversToInclude": {
+ "button": "Выберите драйверы для включения"
+ },
+ "SelectLessDrivers": {
+ "validation": "Можно выбрать не более ста драйверов"
+ },
+ "SelectMoreDrivers": {
+ "validation": "Необходимо выбрать хотя бы один драйвер"
+ },
+ "SelectedDrivers": {
+ "label": "Выбранные драйверы"
+ },
+ "availabilityDate": "Сделать доступным в Центре обновления Windows",
+ "bladeTitle": "Обновления драйверов Windows 10 и более поздних версий (предварительная версия)",
+ "lastSync": "Последняя синхронизация:",
+ "lastSyncDefaultText": "Ожидание первоначального сбора данных инвентаризации",
+ "loadError": "Не удалось выполнить загрузку!"
+ },
+ "DriverStatus": {
+ "approved": "Утверждено",
+ "declined": "Отклонено",
+ "export": "Экспорт рекомендуемых драйверов",
+ "needsReview": "Требуется проверка",
+ "paused": "Приостановлено"
+ },
+ "DriversToReview": {
+ "text": "{0} для проверки"
+ },
+ "Subtitle": {
+ "automatic": "Политика автоматического утверждения обновления драйверов",
+ "manual": "Политика ручного утверждения обновления драйверов"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Рекомендуемые",
- "CountryNames": {
- "countryNameNR": "Науру",
- "countryNameBH": "Бахрейн",
- "countryNameZA": "ЮАР",
- "countryNameJO": "Иордания",
- "countryNameSD": "Судан",
- "countryNameNU": "Ниуэ",
- "countryNameCZ": "Чешская Республика",
- "countryNameLT": "Литва",
- "countryNameTK": "Токелау",
- "countryNameEC": "Эквадор",
- "countryNameVU": "Вануату",
- "countryNameUG": "Уганда",
- "countryNameLI": "Лихтенштейн",
- "countryNameHK": "Гонконг, CАР",
- "countryNameGH": "Гана",
- "countryNameSA": "Саудовская Аравия",
- "countryNamePG": "Папуа — Новая Гвинея",
- "countryNameBW": "Ботсвана",
- "countryNameDG": "Диего-Гарсия",
- "countryNameIN": "Индия",
- "countryNameHN": "Гондурас",
- "countryNameRO": "Румыния",
- "countryNameKZ": "Казахстан",
- "countryNameLC": "Сент-Люсия",
- "countryNameGE": "Грузия",
- "countryNameTT": "Тринидад и Тобаго",
- "countryNameMP": "Северные Марианские острова",
- "countryNameMV": "Мальдивы",
- "countryNameFI": "Финляндия",
- "countryNameNO": "Норвегия",
- "countryNameEE": "Эстония",
- "countryNameVE": "Венесуэла",
- "countryNameUZ": "Узбекистан",
- "countryNameME": "Черногория",
- "countryNameTJ": "Таджикистан",
- "countryNameAW": "Аруба",
- "countryNameFR": "Франция",
- "countryNameOM": "Оман",
- "countryNameAO": "Ангола",
- "countryNameIT": "Италия",
- "countryNameAZ": "Азербайджан",
- "countryNameKG": "Киргизия",
- "countryNameWF": "Уоллис и Футуна",
- "countryNameTL": "Тимор-Лесте",
- "countryNameFK": "Фолклендские острова (Мальвинские)",
- "countryNameGY": "Гайана",
- "countryNameSS": "Южный Судан",
- "countryNameMM": "Мьянма",
- "countryNameHT": "Гаити",
- "countryNameSY": "Сирия",
- "countryNameMD": "Молдова",
- "countryNameVC": "Сент-Винсент и Гренадины",
- "countryNameID": "Индонезия",
- "countryNameRE": "Реюньон",
- "countryNameER": "Эритрея",
- "countryNameMK": "Северная Македония",
- "countryNameTG": "Того",
- "countryNamePF": "Французская Полинезия",
- "countryNameKY": "Острова Кайман",
- "countryNameIO": "Британская территория в Индийском океане",
- "countryNameRU": "Россия",
- "countryNameMA": "Марокко",
- "countryNameAU": "Австралия",
- "countryNameBO": "Боливия",
- "countryNameVA": "Ватикан",
- "countryNameVG": "Виргинские острова (Великобритания)",
- "countryNameFM": "Микронезия, Федеративные Штаты",
- "countryNameAQ": "Антарктида",
- "countryNameZM": "Замбия",
- "countryNameBR": "Бразилия",
- "countryNameIS": "Исландия",
- "countryNamePE": "Перу",
- "countryNameBG": "Болгария",
- "countryNamePR": "Пуэрто-Рико",
- "countryNameGI": "Гибралтар",
- "countryNameBS": "Багамы",
- "countryNameJE": "Джерси",
- "countryNameMO": "Макао, САР",
- "countryNameRW": "Руанда",
- "countryNameAS": "Американское Самоа",
- "countryNameBQ": "Бонэйр, Синт-Эстатиус и Саба",
- "countryNameMF": "Сен-Мартен",
- "countryNameTM": "Туркменистан",
- "countryNameML": "Мали",
- "countryNameTO": "Тонга",
- "countryNameNC": "Новая Каледония",
- "countryNameAC": "о. Вознесения",
- "countryNameBN": "Бруней",
- "countryNameBD": "Бангладеш",
- "countryNameMW": "Малави",
- "countryNameGM": "Гамбия",
- "countryNameGA": "Габон",
- "countryNameCA": "Канада",
- "countryNameSH": "Святая Елена",
- "countryNameYT": "Майотта",
- "countryNameMN": "Монголия",
- "countryNamePA": "Панама",
- "countryNameCM": "Камерун",
- "countryNameNE": "Нигер",
- "countryNameCW": "Кюрасао",
- "countryNameJP": "Япония",
- "countryNameCY": "Кипр",
- "countryNameCD": "Демократическая Республика Конго",
- "countryNameTN": "Тунис",
- "countryNameTR": "Турция",
- "countryNameWS": "Самоа",
- "countryNameSE": "Швеция",
- "countryNameXK": "Косово",
- "countryNameKH": "Камбоджа",
- "countryNamePL": "Польша",
- "countryNameDZ": "Алжир",
- "countryNameLR": "Либерия",
- "countryNameSO": "Сомали",
- "countryNameDM": "Доминика",
- "countryNameEG": "Египет",
- "countryNameGF": "Французская Гвиана",
- "countryNameNZ": "Новая Зеландия",
- "countryNamePS": "Палестинская автономия",
- "countryNameIL": "Израиль",
- "countryNameSL": "Сьерра-Леоне",
- "countryNameGR": "Греция",
- "countryNameNG": "Нигерия",
- "countryNameMR": "Мавритания",
- "countryNameVI": "Виргинские острова (США)",
- "countryNameGQ": "Экваториальная Гвинея",
- "countryNameMX": "Мексика",
- "countryNameDJ": "Джибути",
- "countryNameGN": "Гвинея",
- "countryNameCN": "Китай",
- "countryNameMZ": "Мозамбик",
- "countryNameBV": "Остров Буве",
- "countryNameNF": "Остров Норфолк",
- "countryNameTZ": "Танзания",
- "countryNameAI": "Ангилья",
- "countryNameGS": "Южная Георгия и Южные Сандвичевы о-ва",
- "countryNameRS": "Сербия",
- "countryNameCC": "Кокосовые (Килинг) острова",
- "countryNameNA": "Намибия",
- "countryNameDE": "Германия",
- "countryNameCG": "Республика Конго",
- "countryNameKW": "Кувейт",
- "countryNameMH": "Маршалловы Острова",
- "countryNameVN": "Вьетнам",
- "countryNameBY": "Беларусь",
- "countryNameMY": "Малайзия",
- "countryNameST": "Сан-Томе и Принсипи",
- "countryNameLS": "Лесото",
- "countryNameBI": "Бурунди",
- "countryNameTD": "Чад",
- "countryNameCX": "Остров Рождества",
- "countryNameIR": "Иран",
- "countryNameTV": "Тувалу",
- "countryNameGW": "Гвинея-Бисау",
- "countryNameUA": "Украина",
- "countryNameCU": "Куба",
- "countryNameCO": "Колумбия",
- "countryNameNI": "Никарагуа",
- "countryNameHR": "Хорватия",
- "countryNameSC": "Сейшелы",
- "countryNameNL": "Нидерланды",
- "countryNameUM": "Малые Тихоокеанские Отдаленные Острова США",
- "countryNameIM": "Остров Мэн",
- "countryNameFJ": "Фиджи",
- "countryNameSR": "Суринам",
- "countryNameGT": "Гватемала",
- "countryNameSM": "Сан-Марино",
- "countryNameLA": "Лаос",
- "countryNameGB": "Соединенное Королевство",
- "countryNameBB": "Барбадос",
- "countryNameSI": "Словения",
- "countryNameAM": "Армения",
- "countryNameAR": "Аргентина",
- "countryNamePM": "Сен-Пьер и Микелон",
- "countryNameTF": "Французские Южные Территории",
- "countryNameDO": "Доминиканская Республика",
- "countryNameZW": "Зимбабве",
- "countryNameMQ": "Мартиника",
- "countryNamePT": "Португалия",
- "countryNameCF": "Центрально-Африканская Республика",
- "countryNameBE": "Бельгия",
- "countryNameKM": "Коморы",
- "countryNameLY": "Ливия",
- "countryNameIE": "Ирландия",
- "countryNameKP": "Северная Корея",
- "countryNameGG": "Гернси",
- "countryNameSK": "Словакия",
- "countryNameTC": "Острова Теркс и Кайкос",
- "countryNameNP": "Непал",
- "countryNameBF": "Буркина-Фасо",
- "countryNameYE": "Йемен",
- "countryNameBA": "Босния и Герцеговина",
- "countryNameGP": "Гваделупа",
- "countryNameMS": "Монтсеррат",
- "countryNameCL": "Чили",
- "countryNameIQ": "Ирак",
- "countryNameSJ": "Шпицберген и остров Ян-Майен",
- "countryNameAX": "Аландские острова",
- "countryNameKE": "Кения",
- "countryNameGU": "Гуам",
- "countryNameBM": "Бермуды",
- "countryNameFO": "Фарерские Острова",
- "countryNameBL": "Сен-Бартельми",
- "countryNameLB": "Ливан",
- "countryNameJM": "Ямайка",
- "countryNameAF": "Афганистан",
- "countryNameES": "Испания",
- "countryNameMC": "Монако",
- "countryNameSG": "Сингапур",
- "countryNameAL": "Албания",
- "countryNameSN": "Сенегал",
- "countryNameSZ": "Эсватини",
- "countryNameBZ": "Белиз",
- "countryNameCI": "Кот-д'Ивуар",
- "countryNameTW": "Тайвань",
- "countryNameUY": "Уругвай",
- "countryNameCK": "Острова Кука",
- "countryNameTH": "Таиланд",
- "countryNameHM": "Остров Херд и острова Макдональд",
- "countryNameGD": "Гренада",
- "countryNameUS": "Соединенные Штаты",
- "countryNameAT": "Австрия",
- "countryNameKR": "Республика Корея",
- "countryNamePK": "Пакистан",
- "countryNameDK": "Дания",
- "countryNameSV": "Сальвадор",
- "countryNamePW": "Палау",
- "countryNameET": "Эфиопия",
- "countryNameMG": "Мадагаскар",
- "countryNameCR": "Коста-Рика",
- "countryNameLU": "Люксембург",
- "countryNameQA": "Катар",
- "countryNameBT": "Бутан",
- "countryNameSB": "Соломоновы Острова",
- "countryNameAE": "ОАЭ",
- "countryNameAD": "Андорра",
- "countryNameCV": "Кабо-Верде",
- "countryNameAG": "Антигуа и Барбуда",
- "countryNameMU": "Маврикий",
- "countryNameHU": "Венгрия",
- "countryNameSX": "Синт-Мартен",
- "countryNameCH": "Швейцария",
- "countryNamePN": "О-ва Питкэрн",
- "countryNameGL": "Гренландия",
- "countryNamePH": "Филиппины",
- "countryNameMT": "Мальта",
- "countryNameKN": "Сент-Китс и Невис",
- "countryNameLK": "Шри-Ланка",
- "countryNameKI": "Кирибати",
- "countryNameBJ": "Бенин",
- "countryNameLV": "Латвия",
- "countryNamePY": "Парагвай"
- }
- }
+ "SyncNotification": {
+ "failure": "Не удалось синхронизировать {0}",
+ "failureDescription": "Произошла ошибка, и не удалось выполнить запрошенную синхронизацию. Повторите попытку.",
+ "pending": "Синхронизация {0} выполняется",
+ "pendingDescription": "Извлекаются последние данные. Этот процесс может занять несколько минут.",
+ "success": "Синхронизация {0} завершена",
+ "successDescription": "Синхронизация со службой \"Центр обновления Windows для бизнеса\" завершена в {0}"
+ },
+ "SyncSpinner": {
+ "text": "Выполняется синхронизация. Это может занять несколько минут. Следите за оповещением об окончании синхронизации или вернитесь на эту страницу позже."
+ },
+ "TabName": {
+ "basics": "Основные сведения",
+ "driverUpdateSettings": "Параметры",
+ "otherDrivers": "Другие драйверы",
+ "properties": "Свойства",
+ "recommendedDrivers": "Рекомендуемые драйверы"
+ },
+ "driverAddFilter": "Добавить фильтр",
+ "driverApplicableDevices": "Применимые устройства",
+ "driverApprovalStatus": "Состояние",
+ "driverBulkActions": "Массовые действия",
+ "driverClass": "Класс драйвера",
+ "driverCount": "Отображаются записи с {0} по {1} из {2}.",
+ "driverFilterNoneSelected": "Ничего не выбрано",
+ "driverManufacturer": "Производитель",
+ "driverName": "Имя драйвера",
+ "driverNameLower": "развертывание обновления дайвера windows",
+ "driverNameUpper": "развертывание обновления дайвера Windows",
+ "driverRefresh": "Обновить",
+ "driverReleaseDate": "Дата выпуска",
+ "driverSearch": "Поиск",
+ "driverSearchKeyword": "Введите ключевое слово поиска",
+ "driverVersion": "Версия",
+ "firstDeploymentDate": "Первое развертывание",
+ "infoBoxText": "После назначения и создания политики до заполнения инвентаризации может пройти до 24 часов",
+ "textBlockText": "Выберите параметры политик утверждения и развертывания. Выберите настройку политики для автоматического или ручного утверждения и развертывания обновлений. Изменение метода утверждения после создания политики не предусмотрено, но изменения, внесенные в индивидуальные утверждения и сведения о развертывании, возможны после сборки инвентаризации для назначенных устройств."
+ },
+ "TACSettings": {
+ "edgeSettings": "Параметры конфигурации Microsoft Edge",
+ "edgeWindowsDataProtectionSettings": "Параметры защиты данных Microsoft Edge (Windows) — предварительная версия",
+ "edgeWindowsSettings": "Параметры конфигурации Microsoft Edge (Windows) — предварительная версия",
+ "generalAppConfig": "Общая конфигурация приложений",
+ "generalSettings": "Общие параметры конфигурации",
+ "outlookSMIMEConfig": "Параметры S/MIME Outlook",
+ "outlookSettings": "Параметры конфигурации Outlook",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-sv.json b/Documentation/Strings-sv.json
index c113feb..b1f8c70 100644
--- a/Documentation/Strings-sv.json
+++ b/Documentation/Strings-sv.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Inställning av dataskydd"
- },
- "OrganizeMailByThread": {
- "title": "Sortera e-post efter tråd",
- "tooltip": "Standardfunktionssättet i Outlook är att slå ihop mejlkonversationer till en trådad konversationsvy. Om inställningen är inaktiverad visas varje mejl enskilt i Outlook och grupperas inte efter tråd."
- },
- "Sync": {
- "header": "Synkronisera kontaktfält med konfiguration i intern kontaktapp"
- },
- "allowBiometricsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
- "allowBiometricsTitle": "Kräv biometrik för att få åtkomst till appen",
- "allowBiometricsTooltip": "Användarna kan behöva använda biometrik, till exempel TouchID och FaceID, för att öppna appen på sina enheter. Om så är fallet används biometrik utöver den autentiseringsmetod som valts i profilen. Den här inställningen bör inte aktiveras när Intune-principer för appskydd har distribuerats eftersom appskyddsprincipen omfattar åtkomstkrav innan hanterade data kan öppnas. Om båda alternativen är aktiverade ställs flera åtkomstkrav för att öppna Outlook Mobile. När alternativet inte är konfigurerat är standardappinställningen Av.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
- "allowCalendarNotificationsTitle": "Kalenderaviseringar",
- "allowCalendarNotificationsTooltip": "Tillåt att kalendernotiser visar fullständig information när appskyddsprincipens inställning Organisationsdatameddelanden är inställd på Blockera organisationsdata.",
- "allowDefaultAppSignatureTitle": "Standardsignatur för app",
- "allowDefaultAppSignatureTooltip": "Standardsignatur för app visar om appen ska använda Skaffa Outlook för iOS som standardsignatur när meddelanden skrivs. Om inställningen är Av, används ingen standardsignatur utan användarna kan lägga till egna signaturer. När alternativet Inte konfigurerat har valts så är standardappinställningen På.",
- "allowExternalRecipientsMailTipTitle": "E-posttips om externa mottagare",
- "allowExternalRecipientsMailTipTooltip": "E-posttips om externa mottagare visas om avsändaren lägger till en extern mottagare eller en distributionsgrupp som innehåller externa mottagare. Avsändarna meddelas när ett mejl de skriver ska lämna organisationen, och hjälper dem att fatta rätt beslut om ordval, tonläge och innehåll. Endast tillgängligt för Exchange Online-konton och lokala konton som använder modern hybridautentisering. När alternativet inte är konfigurerat är standardappinställningen På.",
- "allowFocusedInboxTitle": "Prioriterad inkorg",
- "allowFocusedInboxTooltip": "Prioriterad inkorg delar upp inkorgen i två flikar: Prioriterad och Övrig. Dina viktigaste e-postmeddelanden visas på fliken Prioriterad medan resten flyttas till fliken Övrig, fortfarande lättillgängligt. När alternativet inte är konfigurerat är standardappinställningen På.",
- "allowMailNotificationsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
- "allowMailNotificationsTitle": "E-postaviseringar",
- "allowMailNotificationsTooltip": "Värdet anger om Outlook ska tillåta mejlaviseringar. Om värdet är Nej inaktiveras mejlaviseringar.",
- "allowOrgDataOnWearablesTitle": "Organisationsdata på kroppsnära enheter",
- "allowOrgDataOnWearablesTooltip": "Värdet anger om Outlook-data ska synkroniseras med en kroppsnära enhet. Om värdet är Nej inaktiveras synkronisering med kroppsnära enheter.",
- "allowSaveContactsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen för kontaktsynkronisering.",
- "allowSaveContactsTitle": "Spara kontakter",
- "allowSaveContactsTooltip": "När kontakter sparas i mobilens inbyggda adressbok kan nya samtal och sms länkas till användarens befintliga Outlook-kontakter. När alternativet inte är konfigurerat är standardappinställningen Av.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
- "allowSmartReplyTitle": "Föreslagna svar",
- "allowSmartReplyTooltip": "När du öppnar ett meddelande kan du få svarsförslag från Office under meddelandet. Om du markerar ett förslag på svar kan du redigera det innan du skickar det. När alternativet inte är konfigurerat är standardappinställningen På.",
- "allowUserChangeGeneralToolTip": "Ange om användaren får ändra inställningen.",
- "allowUserChangeTitle": "Tillåt användaren att ändra inställning",
- "blockExternalImagesAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
- "blockExternalImagesTitle": "Blockera externa bilder",
- "blockExternalImagesTooltip": "När Blockera externa bilder är aktiverat går det inte att ladda ned bilder från Internet som är inbäddade i meddelandetexten. När alternativet inte är konfigurerat är standardappinställningen Av.",
- "disableAddinsTitle": "Tillåt tillägg",
- "disableAddinsTooltip": "Som standard tillåter en appskyddsprincip att användare använder tillägg från tredje part, men kan användas för att blockera tillägg med inställningen \"Synkronisera principhanterade appdata med inbyggda appar eller tillägg\". Om du konfigurerar den här inställningen till \"Av\" blockeras tillägg när inställningen För appskyddsprincip är inställd på Tillåten.",
- "discoverFeedTitle": "Identifieringsflöde",
- "discoverFeedTooltip": "Identifieringsflödet täcker de Office-filer du använder mest. Det här flödet aktiveras automatiskt när Delve har aktiverats för användaren. När alternativet inte är konfigurerat är standardappinställningen På.",
- "enableSMIMETitle": "Aktivera S/MIME",
- "enableSMIMETooltip": "Ange om S/MIME-kontroller ska aktiveras när ett mejl skrivs.",
- "encryptAllEmails": "Kryptera alla mejl",
- "encryptAllEmailsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen Kryptera alla mejl.",
- "encryptAllEmailsTooltip": "Ange om alla mejl måste krypteras. Vid kryptering omvandlas data till en chiffertext som bara kan läsas av behöriga mottagare.",
- "ldapUrl": "LDAP-webbadress",
- "ldapUrlTooltip": "Det här är LDAP-värdnamnet där klienter kan få de offentliga krypteringsnycklarna för mejlmottagarna. Mejlen krypteras när en nyckel är tillgänglig. Format som stöds: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
- "nativeCalendarSyncMAMOnlyTitle": "Tillåt kalendersynkronisering",
- "nativeCalendarSyncMAMOnlyTooltip": "Som standard möjliggör en appskyddsprincip kalendersynkronisering till den inbyggda appen Kalender, men kan användas för att blockera tillgängligheten för kalendersynkronisering. Inställningen fungerar oberoende av appskyddsprincipinställningen och gör det möjligt för organisationer att ange huruvida kalendersynkronisering ska vara tillgängligt för arbets- eller skolkontot.",
- "nativeCalendarSyncTitle": "Synkronisera kalendrar",
- "nativeCalendarSyncTooltip": "Som standard tillåter en appskyddsprincip kalendersynkronisering till den interna kalenderappen, men kan användas för att blockera tillgängligheten för kalendersynkronisering med inställningen \"Synkronisera principhanterade appdata med inbyggda appar eller tillägg\". Om du konfigurerar den här inställningen till \"Av\" blockeras kalendersynkronisering när inställningen appskyddsprincip är inställd på Tillåten.",
- "playMyEmailsTitle": "Spela upp mina e-postmeddelanden",
- "playMyEmailsTooltip": "Funktionen Spela upp mina e-postmeddelanden är inte aktiverad som standard i appen men visas för behöriga användare via en banderoll i inkorgen. När funktionen är inställd på Av, visas den inte för behöriga användare i appen. Användarna kan manuellt aktivera Spela upp mina e-postmeddelanden inifrån appen även när funktionen är Av. När den är inställd på Inte konfigurerat är standardappinställningen På och funktionen visas för behöriga användare.",
- "signAllEmails": "Signera alla mejl",
- "signAllEmailsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen Signera alla mejl.",
- "signAllEmailsTooltip": "Ange om alla mejl måste signeras. En digital signatur verifierar ett mejls autenticitet och säkerställer att innehållet inte har ändrats under överföringen.",
- "syncAddressTitle": "Adress",
- "syncAddressTooltip": "Värdet anger om kontaktens adress ska synkroniseras med interna kontakter.",
- "syncBirthdayTitle": "Födelsedag",
- "syncBirthdayTooltip": "Värdet anger om kontaktens födelsedag ska synkroniseras med interna kontakter.",
- "syncCompanyTitle": "Företag",
- "syncCompanyTooltip": "Värdet anger om kontaktens företagsnamn ska synkroniseras med interna kontakter.",
- "syncDepartmentTitle": "Avdelning",
- "syncDepartmentTooltip": "Värdet anger om kontaktens avdelning ska synkroniseras med interna kontakter.",
- "syncEmailAddressTitle": "E-postadress",
- "syncEmailAddressTooltip": "Värdet anger om kontaktens e-postadress ska synkroniseras med interna kontakter.",
- "syncInstantMessagingAddressTitle": "Snabbmeddelandeadress",
- "syncInstantMessagingAddressTooltip": "Värdet anger om kontaktens snabbmeddelandeadress ska synkroniseras med interna kontakter.",
- "syncJobTitleTitle": "Befattning",
- "syncJobTitleTooltip": "Värdet anger om kontaktens befattning ska synkroniseras med interna kontakter.",
- "syncNicknameTitle": "Smeknamn",
- "syncNicknameTooltip": "Värdet anger om kontaktens smeknamn ska synkroniseras med interna kontakter.",
- "syncNotesTitle": "Anteckningar",
- "syncNotesTooltip": "Värdet anger om kontaktens anteckningar ska synkroniseras med interna kontakter.",
- "syncPhoneHomeFaxNumberTitle": "Hemfaxnummer",
- "syncPhoneHomeFaxNumberTooltip": "Värdet anger om kontaktens hemfaxnummer ska synkroniseras med interna kontakter.",
- "syncPhoneHomeNumberTitle": "Hemtelefonnummer",
- "syncPhoneHomeNumberTooltip": "Värdet anger om kontaktens hemtelefonnummer ska synkroniseras med interna kontakter.",
- "syncPhoneMobileNumberTitle": "Mobiltelefonnummer",
- "syncPhoneMobileNumberTooltip": "Värdet anger om kontaktens mobiltelefonnummer ska synkroniseras med interna kontakter.",
- "syncPhoneOtherNumberTitle": "Annat telefonnummer",
- "syncPhoneOtherNumberTooltip": "Värdet anger om kontaktens andra telefonnummer ska synkroniseras med interna kontakter.",
- "syncPhonePagerNumberTitle": "Personsökarnummer",
- "syncPhonePagerNumberTooltip": "Värdet anger om kontaktens personsökarnummer ska synkroniseras med interna kontakter.",
- "syncPhoneWorkFaxNumberTitle": "Arbetsfaxnummer",
- "syncPhoneWorkFaxNumberTooltip": "Värdet anger om kontaktens arbetsfaxnummer ska synkroniseras med interna kontakter.",
- "syncPhoneWorkNumberTitle": "Arbetstelefonnummer",
- "syncPhoneWorkNumberTooltip": "Värdet anger om arbetstelefonnumret ska synkroniseras med interna kontakter.",
- "syncPrefixTitle": "Namnprefix",
- "syncPrefixTooltip": "Värdet anger om kontaktens namnprefix ska synkroniseras med interna kontakter.",
- "syncSuffixTitle": "Namnsuffix",
- "syncSuffixTooltip": "Värdet anger om kontaktens namnsuffix ska synkroniseras med interna kontakter.",
- "textPredictionsTitle": "Textförutsägelse",
- "textPredictionsTooltip": "Outlook kan föreslå ord och fraser medan du skriver meddelanden. Svep för att godkänna ett förslag från Outlook. När alternativet inte är konfigurerat är standardappinställningen På.",
- "themesEnabledTitle": "Aktiverade teman",
- "themesEnabledTooltip": "Ange om användaren får använda ett anpassat visuellt tema."
- },
- "Languages": {
- "ar-aE": "Arabiska (Förenade Arabemiraten)",
- "ar-bH": "Arabiska (Bahrain)",
- "ar-dZ": "Arabiska (Algeriet)",
- "ar-eG": "Arabiska (Egypten)",
- "ar-iQ": "Arabiska (Irak)",
- "ar-jO": "Arabiska (Jordanien)",
- "ar-kW": "Arabiska (Kuwait)",
- "ar-lB": "Arabiska (Libanon)",
- "ar-lY": "Arabiska (Libyen)",
- "ar-mA": "Arabiska (Marocko)",
- "ar-oM": "Arabiska (Oman)",
- "ar-qA": "Arabiska (Qatar)",
- "ar-sA": "Arabiska (Saudiarabien)",
- "ar-sY": "Arabiska (Syrien)",
- "ar-tN": "Arabiska (Tunisien)",
- "ar-yE": "Arabiska (Jemen)",
- "az-cyrl": "Azerbajdzjanska (kyrillisk, Azerbajdzjan)",
- "az-latn": "Azerbajdzjanska (latinsk, Azerbajdzjan)",
- "bn-bD": "Bangla (Bangladesh)",
- "bn-iN": "Bangla (Indien)",
- "bs-cyrl": "Bosniska (kyrillisk)",
- "bs-latn": "Bosniska (latinsk)",
- "zh-cN": "Kinesiska (Folkrepubliken Kina)",
- "zh-hK": "Kinesiska (Hongkong SAR)",
- "zh-mO": "Kinesiska (Macao SAR)",
- "zh-sG": "Kinesiska (Singapore)",
- "zh-tW": "Kinesiska (Taiwan)",
- "hr-bA": "Kroatiska (latinsk)",
- "hr-hR": "Kroatiska (Kroatien)",
- "nl-bE": "Nederländska (Belgien)",
- "nl-nL": "Nederländska (Nederländerna)",
- "en-aU": "Engelska (Australien)",
- "en-bZ": "Engelska (Belize)",
- "en-cA": "Engelska (Kanada)",
- "en-cabn": "Engelska (Karibien)",
- "en-iE": "Engelska (Irland)",
- "en-iN": "Engelska (Indien)",
- "en-jM": "Engelska (Jamaica)",
- "en-mY": "Engelska (Malaysia)",
- "en-nZ": "Engelska (Nya Zeeland)",
- "en-pH": "Engelska (Filippinerna)",
- "en-sG": "Engelska (Singapore)",
- "en-tT": "Engelska (Trinidad och Tobago)",
- "en-uK": "Engelska (Storbritannien)",
- "en-uS": "Engelska (USA)",
- "en-zA": "Engelska (Sydafrika)",
- "en-zW": "Engelska (Zimbabwe)",
- "fr-bE": "Franska (Belgien)",
- "fr-cA": "Franska (Kanada)",
- "fr-cH": "Franska (Schweiz)",
- "fr-fR": "Franska (Frankrike)",
- "fr-lU": "Franska (Luxemburg)",
- "fr-mC": "Franska (Monaco)",
- "de-aT": "Tyska (Österrike)",
- "de-cH": "Tyska (Schweiz)",
- "de-dE": "Tyska (Tyskland)",
- "de-lI": "Tyska (Liechtenstein)",
- "de-lU": "Tyska (Luxemburg)",
- "iu-cans": "Inuktitut (syllabisk, Kanada)",
- "iu-latn": "Inuktitut (latinsk, Kanada)",
- "it-cH": "Italienska (Schweiz)",
- "it-iT": "Italienska (Italien)",
- "ms-bN": "Malajiska (Brunei Darussalam)",
- "ms-mY": "Malajiska (Malaysia)",
- "mn-cN": "Mongoliska (traditionell mongoliska, Kina)",
- "mn-mN": "Mongoliska (kyrillisk, Mongoliet)",
- "no-nB": "Norska, bokmål (Norge)",
- "no-nn": "Norska, nynorsk (Norge)",
- "pt-bR": "Portugisiska (Brasilien)",
- "pt-pT": "Portugisiska (Portugal)",
- "quz-bO": "Quechua (Bolivia)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Peru)",
- "smj-nO": "Lulesamiska (Norge)",
- "smj-sE": "Lulesamiska (Sverige)",
- "se-fI": "Nordsamiska (Finland)",
- "se-nO": "Nordsamiska (Norge)",
- "se-sE": "Nordsamiska (Sverige)",
- "sma-nO": "Sydsamiska (Norge)",
- "sma-sE": "Sydsamiska (Sverige)",
- "smn": "Enaresamiska (Finland)",
- "sms": "Skoltsamiska (Finland)",
- "sr-Cyrl-bA": "Serbiska (kyrillisk)",
- "sr-Cyrl-rS": "Serbiska (kyrillisk, Serbien och Montenegro [f.d.])",
- "sr-Latn-bA": "Serbiska (latinsk)",
- "sr-Latn-rS": "Serbiska (latinsk, Serbien)",
- "dsb": "Lågsorbiska (Tyskland)",
- "hsb": "Högsorbiska (Tyskland)",
- "es-es-tradnl": "Spanska (Spanien, traditionell sort)",
- "es-aR": "Spanska (Argentina)",
- "es-bO": "Spanska (Bolivia)",
- "es-cL": "Spanska (Chile)",
- "es-cO": "Spanska (Colombia)",
- "es-cR": "Spanska (Costa Rica)",
- "es-dO": "Spanska (Dominikanska republiken)",
- "es-eC": "Spanska (Ecuador)",
- "es-eS": "Spanska (Spanien)",
- "es-gT": "Spanska (Guatemala)",
- "es-hN": "Spanska (Honduras)",
- "es-mX": "Spanska (Mexiko)",
- "es-nI": "Spanska (Nicaragua)",
- "es-pA": "Spanska (Panama)",
- "es-pE": "Spanska (Peru)",
- "es-pR": "Spanska (Puerto Rico)",
- "es-pY": "Spanska (Paraguay)",
- "es-sV": "Spanska (El Salvador)",
- "es-uS": "Spanska (USA)",
- "es-uY": "Spanska (Uruguay)",
- "es-vE": "Spanska (Venezuela)",
- "sv-fI": "Svenska (Finland)",
- "uz-cyrl": "Uzbekiska (kyrillisk) (Uzbekistan)",
- "uz-latn": "Uzbekiska (latinsk) (Uzbekistan)",
- "af": "Afrikaans (Sydafrika)",
- "sq": "Albanska (Albanien)",
- "am": "Amhariska (Etiopien)",
- "hy": "Armeniska (Armenien)",
- "as": "Assamesiska (Indien)",
- "ba": "Basjkiriska (Ryssland)",
- "eu": "Baskiska (Baskiska)",
- "be": "Vitryska (Vitryssland)",
- "br": "Bretonska (Frankrike)",
- "bg": "Bulgariska (Bulgarien)",
- "ca": "Katalanska (Katalanska)",
- "co": "Korsikanska (Frankrike)",
- "cs": "Tjeckiska (Tjeckien)",
- "da": "Danska (Danmark)",
- "dv": "Divehi (Maldiverna)",
- "et": "Estniska (Estland)",
- "fo": "Färöiska (Färöarna)",
- "fil": "Filippinska (Filippinerna)",
- "fi": "Finska (Finland)",
- "gl": "Galiciska (Galicien)",
- "ka": "Georgiska (Georgien)",
- "el": "Grekiska (Grekland)",
- "gu": "Gujarati (Indien)",
- "ha": "Haussa (latinsk, Nigeria)",
- "he": "Hebreiska (Israel)",
- "hi": "Hindi (Indien)",
- "hu": "Ungerska (Ungern)",
- "is": "Isländska (Island)",
- "ig": "Ibo (Nigeria)",
- "id": "Indonesiska (Indonesien)",
- "ga": "Iriska (Irland)",
- "xh": "isiXhosa (Sydafrika)",
- "zu": "isiZulu (Sydafrika)",
- "ja": "Japanska (Japan)",
- "kn": "Kannada (Indien)",
- "kk": "Kazakiska (Kazakstan)",
- "km": "Kambodjanska (Kambodja)",
- "rw": "Rwanda (Rwanda)",
- "sw": "Swahili (Kenya)",
- "kok": "Konkani (Indien)",
- "ko": "Koreanska (Korea)",
- "ky": "Kirgiziska (Kirgizistan)",
- "lo": "Laotiska (Laos)",
- "lv": "Lettiska (Lettland)",
- "lt": "Litauiska (Litauen)",
- "lb": "Luxemburgiska (Luxemburg)",
- "mk": "Makedonska (Nordmakedonien)",
- "ml": "Malayalam (Indien)",
- "mt": "Maltesiska (Malta)",
- "mi": "Maori (Nya Zeeland)",
- "mr": "Marathi (Indien)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepalesiska (Nepal)",
- "oc": "Occitanska (Frankrike)",
- "or": "Odia (Indien)",
- "ps": "Afghanska (Afghanistan)",
- "fa": "Persiska",
- "pl": "Polska (Polen)",
- "pa": "Punjabi (Indien)",
- "ro": "Rumänska (Rumänien)",
- "rm": "Rätoromanska (Schweiz)",
- "ru": "Ryska (Ryssland)",
- "sa": "Sanskrit (Indien)",
- "st": "Nordsotho (Sydafrika)",
- "tn": "Tswana (Sydafrika)",
- "si": "Singalesiska (Sri Lanka)",
- "sk": "Slovakiska (Slovakien)",
- "sl": "Slovenska (Slovenien)",
- "sv": "Svenska (Sverige)",
- "syr": "Syriska (Syrien)",
- "tg": "Tadzjikiska (kyrillisk, Tadzjikistan)",
- "ta": "Tamil (Indien)",
- "tt": "Tatariska (Ryssland)",
- "te": "Telugu (Indien)",
- "th": "Thailändska (Thailand)",
- "bo": "Tibetanska (Kina)",
- "tr": "Turkiska (Turkiet)",
- "tk": "Turkmeniska (Turkmenistan)",
- "uk": "Ukrainska (Ukraina)",
- "ur": "Urdu (Pakistan)",
- "vi": "Vietnamesiska (Vietnam)",
- "cy": "Walesiska (Storbritannien)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (Kina)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender för Endpoint",
- "androidDeviceOwnerApplications": "Program",
- "androidDeviceOwnerPolicyMessages": "Anpassad supportinformation",
- "androidForWorkPassword": "Enhetslösenord",
- "appManagement": "Tillåt eller blockera appar",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Begränsade appar",
- "applicationVisibility": "Visa eller dölj appar",
- "applications": "Appbutik",
- "applicationsAndGames": "App Store, dokumentvisning, spel",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Appar och användarupplevelse",
- "associatedDomains": "Tillhörande domäner",
- "autonomousSingleAppMode": "Autonomt enappsläge",
- "azureOperationalInsights": "Azure Operational Insights",
- "bitLocker": "Windows-kryptering",
- "bootOptions": "Startalternativ",
- "browser": "Webbläsare",
- "builtinApps": "Inbyggda appar",
- "cameras": "Kameror",
- "cellular": "Mobilnät",
- "cloudAndStorage": "Moln och lagring",
- "cloudPrint": "Molnskrivare",
- "complianceEmailProfile": "E-post",
- "connectedDevices": "Anslutna enheter",
- "connectivity": "Mobilnät och anslutning",
- "contentCaching": "Cachelagring av innehåll",
- "controlPanelAndSettings": "Kontrollpanel och inställningar",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Anpassad regelefterlevnad",
- "customConfiguration": "Anpassad konfigurationsprofil",
- "customOMASettings": "Anpassade OMA-URI-inställningar",
- "customPreferences": "Prioritetsfil",
- "dFCISecuritySettings": "Säkerhetsinställningar",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows-brandväggen",
- "defenderLocalSecurityOptions": "Säkerhetsalternativ för lokal enhet",
- "defenderSecurityCenter": "Microsoft Defender Säkerhetscenter",
- "deliveryOptimization": "Leveransoptimering",
- "derivedCredentialAuthenticationConfiguration": "Härledd autentiseringsuppgift",
- "deviceExperience": "Enhetsupplevelse",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Microsoft Defender Application Control",
- "deviceHealth": "Enhetens hälsotillstånd",
- "devicePassword": "Enhetslösenord",
- "deviceProperties": "Enhetsegenskaper",
- "deviceRestrictions": "Allmänt",
- "deviceSecurity": "Systemsäkerhet",
- "display": "Visning",
- "domainJoin": "Domänanslutning",
- "domains": "Domäner",
- "edgeBrowser": "Äldre Microsoft Edge (version 45 och tidigare)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge-kioskläge",
- "editionUpgrade": "Uppgradering av utgåva",
- "education": "Utbildning",
- "educationDeviceCerts": "Enhetscertifikat",
- "educationStudentCerts": "Elevcertifikat",
- "educationTakeATest": "Gör ett prov",
- "educationTeacherCerts": "Lärarcertifikat",
- "emailProfile": "E-post",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Tillägg för enkel inloggning",
- "filevault": "FileVault",
- "firewall": "Brandvägg",
- "games": "Spel",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Hälsoövervakning",
- "homeScreenLayout": "Hemskärmslayout",
- "iOSWallpaper": "Skrivbordsunderlägg",
- "importedPFX": "PKCS-importerat certifikat",
- "iosDefenderAtp": "Microsoft Defender för Endpoint",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Kerneltillägg",
- "keyboardAndDictionary": "Tangentbord och ordlista",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Särskilda enheter",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Kiosk-webbläsare",
- "lockScreenMessage": "Meddelande på låsskärm",
- "lockedScreenExperience": "Låst skärm",
- "logging": "Rapportering och telemetri",
- "loginItems": "Inloggningsalternativ",
- "loginWindow": "Inloggningsfönster",
- "macDefenderAtp": "Microsoft Defender för Endpoint",
- "maintenance": "Underhåll",
- "malware": "Skadlig kod",
- "messaging": "Meddelanden",
- "microphonesAndSpeakers": "Mikrofoner och högtalare",
- "networkBoundary": "Nätverksgräns",
- "networkProxy": "Nätverksproxy",
- "notifications": "Appnotiser",
- "pKCS": "PKCS-certifikat",
- "password": "Lösenord",
- "personalProfile": "Privat profil",
- "personalization": "Anpassning",
- "policyOverride": "Åsidosätt grupprincip",
- "ports": "Portar",
- "powerSettings": "Energiinställningar",
- "printer": "Skrivare",
- "privacy": "Sekretess",
- "privacyPerApp": "Sekretessundantag per app",
- "privacyPreferences": "Sekretessinställningar",
- "projection": "Projektion",
- "radios": "Radio",
- "sCCMCompliance": "Configuration Manager-kompatibilitet",
- "sCEP": "SCEP-certifikat",
- "sCEPProperties": "SCEP-certifikat",
- "sMode": "Växla läge (endast Windows Insider)",
- "safari": "Safari",
- "search": "Sök",
- "session": "Session",
- "sharedDevice": "Delad iPad",
- "sharedPCAccountManager": "Delad enhet för flera användare",
- "singleSignOn": "Enkel inloggning",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Inställningar",
- "start": "Start",
- "systemExtensions": "Systemtillägg",
- "systemSecurity": "Systemsäkerhet",
- "trustedCert": "Betrott certifikat",
- "uEFIAccess": "UEFI-åtkomst",
- "updates": "Uppdateringar",
- "userRights": "Användarrättigheter",
- "usersAndAccounts": "Användare och konton",
- "vPN": "Bas-VPN",
- "vPNApps": "Automatisk VPN",
- "vPNAppsAndTrafficRules": "Appar och trafikregler",
- "vPNConditionalAccess": "Villkorlig åtkomst",
- "vPNConnectivity": "Anslutningar",
- "vPNDNSTriggers": "DNS-inställningar",
- "vPNIKEv2": "IKEv2-inställningar",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Delade tunnlar (Split Tunneling)",
- "vPNTrustedNetwork": "Identifiering av betrott nätverk",
- "wakeSettings": "Väckningsinställningar",
- "webContentFilter": "Webbinnehållsfilter",
- "wiFi": "Trådlöst",
- "win10Wifi": "Trådlöst",
- "windowsAtp": "Microsoft Defender för Endpoint",
- "windowsDefenderATP": "Microsoft Defender för Endpoint",
- "windowsHelloForBusiness": "Windows Hello för företag",
- "windowsSpotlight": "Windows Spotlight",
- "wiredNetwork": "Kabelanslutet nätverk",
- "wireless": "Trådlöst",
- "wirelessProjection": "Trådlös projektion",
- "workProfile": "Arbetsprofilinställningar",
- "workProfilePassword": "Lösenord för arbetsprofil",
- "xboxServices": "Xbox-tjänster",
- "zebraMx": "MX-profil (endast Zebra)",
- "complianceActionsLabel": "Åtgärder vid inkompatibilitet"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Beskrivning"
- },
- "FeatureDeploymentSettings": {
- "header": "Inställningar för funktionsdistribution"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Den här funktionen kan inte nedgradera en enhet.",
- "label": "Funktionsuppdatering som ska distribueras"
- },
- "GradualRolloutEndDate": {
- "label": "Tillgänglighet för slutlig grupp"
- },
- "GradualRolloutInterval": {
- "label": "Dagar mellan grupper"
- },
- "GradualRolloutStartDate": {
- "label": "Tillgänglighet för första gruppen"
- },
- "Name": {
- "label": "Namn"
- },
- "OptionalUpdate": {
- "label": "Obligatorisk eller valfri uppdatering"
- },
- "RolloutOptions": {
- "label": "Distributionsalternativ"
- },
- "RolloutSettings": {
- "header": "När vill du göra uppdateringen tillgänglig i Windows Update?"
- },
- "ScopeSettings": {
- "header": "Ställ in omfångstaggar för den här principen."
- },
- "StartDateOnlyStartDate": {
- "label": "Första tillgängliga datum"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Inaktiverat",
- "enabled": "Aktiverat",
- "infoBalloonContent": "Kontrollera om den senaste Windows 10 funktionsuppdateringen för enheter som inte är berättigade till Windows 11",
- "label": "När en enhet inte är berättigad att köra Windows 11, installera den senaste Windows 10-funktionsuppdateringen",
- "notApplicable": "Ej tillämpligt",
- "summaryLabel": "Installera Windows 10 på enheter som inte är berättigade att köra Windows 11"
- },
- "bladeTitle": "Funktionsuppdateringsdistributioner",
- "deploymentSettingsTitle": "Distributionsinställningar",
- "loadError": "Det gick inte att läsa in!",
- "windows11EULA": "Genom att markera användning av den här funktionsuppdateringen när du använder detta operativsystem på en enhet godkänner du att (1) den tillämpliga Windows-licensen köptes genom volymlicensiering, eller (2) du har behörighet att binda din organisation och accepterar å organisationens vägnar relevanta Licensvillkor för Programvara från Microsoft som du hittar här {0}."
- },
- "Notifications": {
- "deploymentSaved": "{0} har sparats.",
- "newFeatureUpdateDeploymentCreated": "Ny distribution av funktionsuppdatering har skapats."
- },
- "TabName": {
- "deploymentSettings": "Distributionsinställningar",
- "groupAssignmentSettings": "Tilldelningar",
- "scopeSettings": "Omfångstaggar"
- },
- "gradualRolloutLicenseWarning": "Den här funktionen kräver specifik licensiering.",
- "gradualRolloutLicenseWarningEdit": "Den här funktionen kan fortsätta att användas och konfigureras tills principen sparas utan att den här funktionen har valts.",
- "licenseLearnMoreText": "Läs mer om krav och principer för funktionsuppdatering.",
- "optionalUpdateWarning": "Valfritt är endast tillgängligt för Windows 11-uppdateringar",
- "profileNameWarning": "Namnet får innehålla färre än 64 tecken",
- "specificLicensingRequired": "Vissa valda funktioner kräver specifik licensiering."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Tillåt användning av gemener i PIN-kod",
- "notAllow": "Tillåt inte användning av gemener i PIN-kod",
- "requireAtLeastOne": "Kräv att minst en gemen bokstav används i PIN-kod"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Tillåt användning av specialtecken i PIN-kod",
- "notAllow": "Tillåt inte användning av specialtecken i PIN-kod",
- "requireAtLeastOne": "Kräv att minst ett specialtecken används i PIN-kod"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Tillåt användning av versaler i PIN-kod",
- "notAllow": "Tillåt inte användning av versaler i PIN-kod",
- "requireAtLeastOne": "Kräv att minst en versal bokstav används i PIN-kod"
- }
+ "InstallContextType": {
+ "device": "Enhet",
+ "deviceContext": "Enhetssammanhang",
+ "user": "Användare",
+ "userContext": "Användarsammanhang"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "Appversion",
- "dependencyName": "Namn på beroende",
- "lastModifiedTime": "Tid för senaste ändring",
- "relationship": "Relation",
- "replaced": "Ersatt",
- "searchPlaceholder": "Filtrera efter appnamn",
- "status": "Statusinformation",
- "statusDetails": "Status",
- "supersedenceName": "Namn för ersättande"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Underordnat beroende",
- "indirectSupersedence": "Inte direkt relaterad",
- "supersedenceAncestors": "Ersättande pågår",
- "supersedenceDescendants": "Ersatt av ett nytt"
- },
- "SupersededReplaced": {
- "no": "Nej",
- "yes": "Ja"
- },
- "Tabs": {
- "chart": "Diagram",
- "dependency": "Beroende",
- "label": "Visa: ",
- "supersedence": "Ersättande",
- "table": "Tabell"
- },
- "dependencyGraphAriaLabel": "Diagram över appsamband",
- "supersedenceGraphAriaLabel": "Diagram över ersättande app"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Välj ett identifieringsskript",
- "scriptFileLabel": "Välj ditt identifieringsskript"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "När det är aktiverat måste enheterna vara kompatibla enligt anpassade regler som definierats i en JSON-fil baserat på anpassade data som returneras från ett PowerShell-skript för identifiering.",
- "label": "Anpassad efterlevnad erbjuds för närvarande som förhandsversion. När den blir allmänt tillgänglig kan du lägga till den till en extra kostnad för licensalternativen som inkluderar Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Skript",
- "placeholder": "Klicka för att välja",
- "searchboxPlaceholder": "Sök efter skriptnamn",
- "title": "Välj ett identifieringsskript"
- },
- "SummaryGrid": {
- "ariaLabel": "Sammanfattning av principer för anpassad regelefterlevnad"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "En blockeringsåtgärd krävs för alla principer för efterlevnad.",
+ "graceperiod": "Schema (dagar av icke-kompatibilitet)",
+ "graceperiodInfo": "Ange efter hur många dagars icke-kompatibilitet den här åtgärden ska aktiveras på användarens enhet",
+ "subtitle": "Ange åtgärdsparametrar",
+ "title": "Åtgärdsparametrar"
+ },
+ "List": {
+ "gracePeriodDay": "{0} dag av icke-kompatibilitet",
+ "gracePeriodDays": "{0} dagar av icke-kompatibilitet",
+ "gracePeriodHour": "{0} timme av icke-kompatibilitet",
+ "gracePeriodHours": "{0} timmar av icke-kompatibilitet",
+ "gracePeriodMinute": "{0} minut av icke-kompatibilitet",
+ "gracePeriodMinutes": "{0} minuter av icke-kompatibilitet",
+ "immediately": "Omedelbart",
+ "schedule": "Schema",
+ "scheduleInfoBalloon": "Dagar efter inkompatibilitet",
+ "subtitle": "Ange följden av åtgärder på icke-kompatibla enheter",
+ "title": "Åtgärder"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Övrigt",
+ "additionalRecipients": "Ytterligare mottagare (via e-post)",
+ "additionalRecipientsBladeTitle": "Välj ytterligare mottagare",
+ "emailAddressPrompt": "Ange e-postadresser (kommateckenåtskilda)",
+ "invalidEmail": "Ogiltig e-postadress",
+ "messageTemplate": "Meddelandemall",
+ "noneSelected": "Inga valda",
+ "notSelected": "Inte valt",
+ "numSelected": "{0} har valts",
+ "selected": "Valda"
},
- "UploadFile": {
- "jsonFileLabel": "Ladda upp och kontrollera att JSON-filen följer inställningarna för anpassad regelefterlevnad",
- "noFileSelectedError": "Välj en .json-fil",
- "parseFileSelectedError": "JSON-filen är ogiltig"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filter",
- "noFilters": "Inget"
- },
- "Platform": {
- "all": "Alla",
- "android": "Android-enhetsadministratör",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Gemensam",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS och Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Okänd",
- "unsupported": "Stöds inte",
- "windows": "Windows",
- "windows10": "Windows 10 och senare",
- "windows10CM": "Windows 10 och senare (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 och senare",
- "windows8And10": "Windows 8 och 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 och senare",
- "windows10AndWindowsServer": "Windows 10, Windows 11 och Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 och senare (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows-dator"
- },
+ "block": "Markera enheten som inkompatibel",
+ "lockDevice": "Lås enhet (lokal åtgärd)",
+ "lockDeviceWithPasscode": "Lås enhet (lokal åtgärd)",
+ "noAction": "Ingen åtgärd",
+ "noActionRow": "Inga åtgärder, välj Lägg till för att lägga till en åtgärd",
+ "pushNotification": "Skicka push-meddelande till slutanvändare",
+ "remoteLock": "Fjärrlås en inkompatibel enhet",
+ "removeSourceAccessProfile": "Ta bort profil för källåtkomst",
+ "retire": "Lägg till enhet i listan över borttagningar",
+ "wipe": "Rensa",
+ "emailNotification": "Skicka e-post till slutanvändare"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Administrationsgrupper",
+ "RoleAssignmentAdminDesc": "Administrationsgruppanvändare är de administratörer som har tilldelats den här rollen",
+ "rolesMenuTitle": "Endpoint Manager-roller",
+ "RoleAssignmentScopeDesc": "Administratörer i den här rolltilldelningen kan tillämpa principer, program och fjärraktiviteter",
+ "RoleAssignmentScope": "Omfångsgrupper"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "Appinformation",
"nameForOfficeSuitApp": "Information om appsvit"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "På Android kan du tillåta fingeravtrycksidentifiering istället för en PIN-kod. Användare ombeds att lämna sitt fingeravtryck när de ska komma åt den här appen från sina arbetskonton.",
- "iOS": "På iOS-/iPadOS-enheter kan du tillåta fingeravtrycksidentifiering istället för PIN-kod. Användarna uppmanas att använda fingeravtryck när de öppnar appen via arbetskontot.",
- "mac": "På Mac-enheter kan du tillåta fingeravtrycksidentifiering istället för PIN-kod. Användarna uppmanas att använda fingeravtryck när de öppnar appen via arbetskontot."
- },
- "allowWidgetContentSync": "Välj Blockera om du vill förhindra att principhanterade appar sparar data till appwidgetar. Om du väljer Tillåt kan den principhanterade appen spara data i appwidgetar, om dessa funktioner stöds och aktiveras i den principhanterade appen. \r\n\r\n \r\n\r\nAppar kan ge ytterligare konfigurationsfunktioner med konfigurationsprinciper för appar. Mer information finns i appens dokumentation.",
- "appSharingFromLevel1": "Välj något av de följande alternativen för att ange de appar som den här appen kan ta emot data från:",
- "appSharingFromLevel2": "{0}: Tillåt endast mottagning av data i organisationsdokument eller konton från andra principhanterade appar",
- "appSharingFromLevel3": "{0}: Tillåt mottagning av data i organisationsdokument eller konton från valfri app",
- "appSharingFromLevel4": "{0}: Tillåt inte mottagning av data i organisationsdokument eller konton från någon app",
- "appSharingFromLevel5": "{0}: Tillåt dataöverföring från alla appar och behandla alla inkommande data utan användaridentitet som organisationsdata.",
- "appSharingToLevel1": "Välj något av de följande alternativen för att ange de appar som den här appen kan ta skicka data till:",
- "appSharingToLevel2": "{0}: Tillåt endast sändning av organisationsdata till andra principhanterade appar",
- "appSharingToLevel3": "{0}: Tillåt sändning av organisationsdata till valfri app",
- "appSharingToLevel4": "{0}: Tillåt inte sändning av organisationsdata till någon app",
- "appSharingToLevel5": "{0}: Tillåt bara överföring till andra principhanterade appar och filöverföring till andra mobilenhetshanterade appar på registrerade enheter",
- "appSharingToLevel6": "{0}: Tillåt bara överföring till andra principhanterade appar och filtrera operativsystem i dialogrutor Öppna i/Dela till att bara visa principhanterade appar",
- "assignmentFilterEdit1": "Om du tillämpar tilldelningsfilter på den här principen tillämpas egenskapen Enhetshantering Type utöver de värden som har angetts för Rikta till appar på alla enhetstyper och Enhetstyper på sidan Appar.",
- "assignmentFilterEdit2": "Läs mer om att tilldela appskyddsprinciper.",
- "conditionalEncryption1": "Välj {0} om du vill inaktivera appkryptering för intern applagring när enhetskryptering har upptäckts på en registrerad enhet.",
- "conditionalEncryption2": "Obs! Intune kan bara identifiera enhetsregistrering med Intune MDM. Extern applagring krypteras fortfarande för att säkerställa att data inte kan nås av ohanterade program.",
- "contactSyncMac": "Om det är inaktiverat kan inte appar spara kontakter i den interna adressboken.",
- "contactsSync": "Välj Blockera för att förhindra att principhanterade appar sparar data i enhetens inbyggda appar (t.ex. kontakter, kalender och widgetar) eller för att förhindra att tillägg används i de principhanterade apparna. Om du väljer Tillåt kan den principhanterade appen spara data i de interna apparna eller använda tillägg, om dessa funktioner stöds och aktiveras i den principhanterade appen.
Appar kan ge ytterligare konfigurationsfunktioner med appkonfigurationsprinciper. Mer information finns i appens dokumentation.",
- "deviceTypeTargetingCreate1": "Enhetstypens mål har flyttats till steget Tilldelningar när principen skapades.",
- "deviceTypeTargetingEdit1": "Om du tillämpar tilldelningsfilter på den här principen tillämpas egenskapen Enhetshantering Type utöver de värden som har angetts för Rikta till appar på alla enhetstyper och Enhetstyper på sidan Appar.",
- "deviceTypeTargetingEdit2": "Om du vill redigera måltypen för enhetshantering återställer du Rikta till appar på alla enhetstyper = Ja. Skapa sedan ett MAM-tilldelningsfilter med önskade värden för Enhetshantering typ.",
- "deviceTypeTargetingHasMoved": "Läs mer om att tilldela appskyddsprinciper",
- "encryptionAndroid1": "För appar som omfattas av en princip för Intune-mobilprogramhantering tillhandahålls kryptering av Microsoft. Data krypteras synkront under I/O-åtgärder enligt inställningen i hanteringsprincipen för mobila program. Hanterade appar på Android använder AES-128-kryptering i CBC-läge med hjälp av plattformens kryptografibibliotek. Krypteringsmetoden är inte FIPS 140-2-kompatibel. SHA-256-kryptering stöds som explicit instruktion med SigAlg-parametern och fungerar bara på 4.2-enheter och senare. Innehåll på enhetslagringen krypteras alltid.",
- "encryptionAndroid2": "När du kräver kryptering i din apprincip måste slutanvändarna konfigurera och använda PIN-koder för att få åtkomst till sina enheter. Om någon PIN-kod inte har konfigurerats för enhetsåtkomst startar inte apparna, utan istället visas ett meddelande för slutanvändaren som säger: \\\"Ditt företag kräver att du först aktiverar en PIN-kod för enheten för att få åtkomst till det här programmet.\\\"",
- "encryptionMac1": "För appar som omfattas av en princip för Intune-mobilprogramhantering tillhandahålls kryptering av Microsoft. Data krypteras synkront under I/O-åtgärder enligt inställningen i hanteringsprincipen för mobila program. Hanterade appar på Mac använder AES-128-kryptering i CBC-läge med hjälp av plattformskryptografibibliotek. Krypteringsmetoden är inte FIPS 140-2-kompatibel. SHA-256-kryptering stöds som explicit instruktion med SigAlg-parametern och fungerar bara på 4.2-enheter och senare. Innehåll på enhetslagringen krypteras alltid.",
- "faceId1": "När det är tillämpligt kan du tillåta att ansiktsidentifiering används istället för PIN-kod. Användare uppmanas då att använda ansiktsidentifiering när de ansluter till den här appen med sina arbetskonton.",
- "faceId2": "Välj Ja om du vill tillåta ansiktsidentifiering istället för PIN-kod för appåtkomst.",
- "managementLevelsAndroid1": "Använd det här alternativet för att ange huruvida principen avser Android-enhetsadministratörsenheter, Android Enterprise-enheter eller ohanterade enheter.",
- "managementLevelsAndroid2": "{0}: Ohanterade enheter är enheter där ingen Intune-mobilenhetshantering har identifierats. Det omfattar även mobilenhetshanteringsleverantörer från tredje part.",
- "managementLevelsAndroid3": "{0}: Intune-hanterade enheter som använder Androids enhetsadministrations-API.",
- "managementLevelsAndroid4": "{0}: Intune-hanterade enheter som använder Android Enterprise-arbetsprofiler eller Android Enterprise fullständig enhetshantering.",
- "managementLevelsIos1": "Använd det här alternativet för att ange om principen avser enheter hanterade via mobilenhetshantering (MDM) eller ohanterade enheter.",
- "managementLevelsIos2": "{0}: Ohanterade enheter är enheter där ingen Intune-mobilenhetshantering har identifierats. Det omfattar även mobilenhetshanteringsleverantörer från tredje part.",
- "managementLevelsIos3": "{0}: Hanterade enheter hanteras av Intune-mobilenhetshantering.",
- "minAppVersion": "Ange det lägsta appversionsnumret som en användare måste ha för att få säker åtkomst till appen.",
- "minAppVersionWarning": "Ange det rekommenderade lägsta appversionsnumret som en användare måste ha för säker åtkomst till appen.",
- "minOsVersion": "Ange den lägsta operativsystemsversionen som en användare måste ha för att få säker åtkomst till appen.",
- "minOsVersionWarning": "Ange den rekommenderade lägsta operativsystemsversionen som en användare måste ha för att få säker åtkomst till appen.",
- "minPatchVersion": "Definiera den äldsta Android-säkerhetsuppdateringsnivån som krävs för att en användare ska ha säker åtkomst till appen.",
- "minPatchVersionWarning": "Definiera den äldsta rekommenderade Android-säkerhetsuppdateringsnivån som en användare kan ha för att få säker åtkomst till appen.",
- "minSdkVersion": "Ange den lägsta versionen av SDK för Intune-programmets skyddsprincip som en användare måste ha för att få säker åtkomst till appen.",
- "requireAppPinDefault": "
Välj Ja om du vill inaktivera appens PIN-kod när ett enhetslås upptäcks på en registrerad enhet.
",
- "targetAllApps1": "Använd det här alternativet om principen ska avse appar på enheter i valfritt hanteringsläge.",
- "targetAllApps2": "Den här inställningen ersätts vid en principkonflikt om användaren har angett en princip avsedd för ett särskilt hanteringsläge.",
- "touchId2": "Välj {0} om du vill kräva identifiering med fingeravtryck istället för PIN-kod för appåtkomst."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "Ange efter hur många dagar användaren måste återställa PIN-koden.",
- "previousPinBlockCount": "Här visas antalet tidigare PIN-koder som sparas i Intune. Eventuellt nya PIN-koder får inte vara desamma som de koder som sparas i Intune."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Det här gör att Windows Search kan fortsätta söka igenom krypterade data.",
- "authoritativeIpRanges": "Aktivera den här inställningen om du vill åsidosätta Windows automatiska identifiering av IP-intervall.",
- "authoritativeProxyServers": "Aktivera den här inställningen om du vill åsidosätta Windows automatiska identifiering av proxyservrar.",
- "checkInput": "Kontrollera inmatningens giltighet",
- "dataRecoveryCert": "Ett återställningscertifikat är ett speciellt EFS-certifikat (krypterande filsystem) som du kan använda för att återställa krypterade filer om du skulle tappa bort eller skada krypteringsnyckeln. Du måste skapa återställningscertifikatet och ange det här. Mer information hittar du här",
- "enterpriseCloudResources": "
Ange molnresurser som ska betraktas som företagsresurser och skyddas av Windows informationsskyddsprincip. Du kan ange flera resurser genom att ange ett |-tecken mellan varje.
Om du har ställt in en proxyserver i företaget kan du ange den proxyserver genom vilken trafik till de angivna molnresurserna ska dirigeras.
webbadress[,proxy]|webbadress[,proxy]
Utan proxy: contoso.sharepoint.com|contoso.visualstudio.com Med proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Ange de IPv4-intervall som utgör ditt företagsnätverk. De används tillsammans med företagsnätverkets domännamn som du anger för att definiera nätverkets gräns.
Windows informationsskydd måste vara aktiverat för att den här inställningen ska gälla.
Du kan ange flera värden genom att ange ett kommatecken mellan varje.
Till exempel: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
- "enterpriseIPv6Ranges": "
Ange de IPv6-intervall som utgör ditt företagsnätverk. De används tillsammans med företagsnätverkets domännamn som du anger för att definiera nätverkets gräns.
Du kan ange flera värden genom att ange ett kommatecken mellan varje.
Till exempel: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
- "enterpriseInternalProxyServers": "
Om du har ställt in en proxyserver i företaget kan du ange den proxyserver genom vilken trafik till de angivna molnresurserna i inställningarna för företagsmolnresurser ska dirigeras.
Du kan ange flera värden genom att ange ett semikolon mellan varje.
Till exempel: contoso.internalproxy1.com;contoso.internalproxy2.com
",
- "enterpriseNetworkDomainNames": "
Ange de DNS-namn som utgör ditt företagsnätverk. De används tillsammans med de IP-intervall som du anger för att definiera företagsnätverkets gräns. Du kan ange flera värden genom att ange ett kommatecken mellan varje.
Windows informationsskydd måste vara aktiverat för att den här inställningen ska gälla.
Till exempel: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Ange de DNS-namn som utgör ditt företagsnätverk. De används tillsammans med de IP-intervall som du anger för att definiera företagsnätverkets gräns. Du kan ange flera värden genom att ange ett lodrätt streck, \\\"|\\\", mellan varje.
Windows informationsskydd måste vara aktiverat för att den här inställningen ska gälla.
Till exempel: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
Om du har externt riktade proxyservrar i företagsnätverket anger du dem här. När du anger en proxyserveradress bör du också ange genom vilken port trafik ska tillåtas och skyddas via Windows informationsskydd.
Obs! Listan får inte innehålla servrar från listan över företagets interna proxyservrar. Du kan ange flera värden genom att ange ett semikolon mellan varje.
Till exempel: proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "Anger hur lång tid som får passera (i minuter) innan en inaktiv enhet låses med PIN-kod eller lösenord. Användarna kan välja en befintlig tidsgräns som är lägre än den angivna maxtiden i Inställningar. Tänk på att Lumia 950 och 950XL har en högsta tidsgräns på 5 minuter, oavsett vilket värde som anges i den här principen.",
- "maxInactivityTime2": "0 (standardvärde) – Ingen tidsgräns anges. Standardvärdet 0 tolkas som Ingen tidsgräns anges.",
- "maxPasswordAttempts1": "Den här principen fungerar på olika sätt på mobila enheter och skrivbordsenheter.",
- "maxPasswordAttempts2": "På en mobil enhet rensas enheten när användaren når det värde som har angetts i principen.",
- "maxPasswordAttempts3": "På en skrivbordsenhet rensas inte enheten när användaren når värdet i principen. I stället försätts enheten i BitLocker-återställningsläge vilket gör att data inte kan nås, men de kan återställas. Om BitLocker inte är aktiverat kan principen inte tillämpas.",
- "maxPasswordAttempts4": "Innan gränsen för antal misslyckade försök nås, skickas användaren till låsskärmen och varnas om att fler försök kommer att låsa datorn. När gränsen nås startar enheten automatiskt om och BitLocker-återställningssidan öppnas. Användaren uppmanas där att ange BitLocker-återställningsnyckeln.",
- "maxPasswordAttempts5": "0 (standardvärde) – Enheten rensas aldrig när en felaktig PIN-kod eller ett felaktigt lösenord har angetts.",
- "maxPasswordAttempts6": "Det säkraste värdet är 0 om alla principvärden = 0. I annat fall är principvärdet Min det säkraste värdet.",
- "mdmDiscoveryUrl": "Ange webbadressen till registreringsslutpunkten för mobilenhetshantering som ska anges av de användare som registrerar sig för mobilenhetshantering. Det anges som standard för Intune.",
- "minimumPinLength1": "Heltal som anger minsta antal tecken som krävs för PIN-koden. Standardvärdet är 4. Du kan ange lägst 4. Det högsta värdet du kan ange måste vara mindre än värdet för Maximal PIN-längd i principen eller 127, beroende på vilket som är lägst.",
- "minimumPinLength2": "Om du konfigurerar den här principinställningen måste PIN-längden vara större än eller lika med det här värdet. Om du inaktiverar eller inte konfigurerar den här principinställningen måste PIN-längden vara större än eller lika med 4.",
- "name": "Namnet på den här nätverksgränsen",
- "neutralResources": "
Om du har autentiseringsslutpunkter för omdirigering i företaget anger du dem här. De platser som anges här betraktas antingen som personliga eller företagsplatser beroende på kontext och anslutning före omdirigeringen.
Du kan ange flera värden genom att ange ett kommatecken mellan varje.
Till exempel: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Värde som anger Windows Hello för företag som inloggningsmetod i Windows.",
- "passportForWork2": "Standardvärdet är sant. Om du ställer in värdet på falskt kan användaren inte installera Windows Hello för företag förutom på Microsoft Entra-anslutna mobiltelefoner där installation krävs.",
- "pinExpiration": "Det högsta talet du kan ange för den här principinställningen är 730. Det lägsta är 0. Om du anger 0 upphör användarens PIN-kod aldrig att gälla.",
- "pinHistory1": "Det högsta talet du kan ange för den här principinställningen är 50. Det lägsta är 0. Om du anger 0 krävs ingen lagring av tidigare PIN-koder.",
- "pinHistory2": "Den aktuella PIN-koden ingår i den grupp PIN-koder som hör till användarkontot. PIN-kodshistoriken sparas inte under en PIN-kodsåterställning.",
- "protectUnderLock": "Skyddar appinnehåll när enheten är låst.",
- "protectionModeBlock": "
Blockera: Blockerar företagsdata från att lämna skyddade appar.
",
- "protectionModeOff": "
Av: Användaren kan fritt flytta data från skyddade appar. Inga åtgärder loggas.
",
- "protectionModeOverride": "
Tillåt åsidosättningar: Användarna får en fråga när de försöker flytta data från en skyddad app till en oskyddad app. Om användaren väljer att åsidosätta frågan loggas åtgärden.
",
- "protectionModeSilent": "
Tyst: Användaren kan fritt flytta data från skyddade appar. De här åtgärderna loggas.
",
- "required": "Obligatorisk",
- "revokeOnMdmHandoff": "Tillagt i Windows 10, version 1703. Den här principen styr om nycklar för Windows informationstjänst ska återkallas när en enhet uppgraderas från MAM till MDM. Om det är inställt på Av återkallas inte nycklarna och användaren har fortsatt åtkomst till skyddade filer efter uppgraderingen. Det här rekommenderas om MDM-tjänsten är inställd med samma EnterpriseID för Windows informationsskydd som MAM-tjänsten.",
- "revokeOnUnenroll": "Det här gör att krypteringsnycklarna återkallas när en enhet avregistreras från den här principen.",
- "rmsTemplateForEdp": "GUID för TemplateID som ska användas för RMS-kryptering. Med hjälp av Azure RMS-mallen kan IT-administratören ange information om vem som har åtkomst till RMS-skyddade filer och hur länge de har åtkomst.",
- "showWipIcon": "Det här gör att en symbol visas för användarna så att de vet att de befinner sig i ett företagssammanhang.",
- "useRmsForWip": "Anger om Azure RMS-kryptering ska tillåtas för Windows informationsskydd."
- },
- "requireAppPin": "
Välj Ja om du vill inaktivera appens PIN-kod när ett enhetslås upptäcks på en registrerad enhet.
Obs! Intune kan inte identifiera enhetsregistrering med en EMM-lösning från tredje part i iOS/iPadOS.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "Appinstallation kan tvinga fram omstart av enhet",
- "basedOnReturnCode": "Bestäm beteende baserat på returkoder",
- "force": "Intune tvingar fram obligatorisk omstart av enhet",
- "suppress": "Ingen specifik åtgärd"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Installationstid som krävs (minuter)",
- "maxRunTimeInMinutesToolTip": "Antalet minuter som systemet väntar på att installationsprogrammet ska slutföras. Standardvärdet är 60 minuter."
- },
- "RunAsAccountOptions": {
- "system": "System",
- "user": "Användare"
- },
- "availableUninstall": "Tillåt tillgänglig avinstallation",
- "availableUninstallTooltip": "Välj Ja om du vill ange avinstallationsalternativet för den här appen för användare från Företagsportal. Välj Nej om du vill hindra användarna från att avinstallera appen från Företagsportal.",
- "bladeTitle": "Program",
- "deviceRestartBehavior": "Beteende för enhetsomstart",
- "deviceRestartBehaviorTooltip": "Välj funktionssätt för omstart av enheten när appen har installerats. Välj Bestäm beteende baserat på returkoder, om du vill starta om enheten utifrån inställningarna för returkoder. Välj Ingen särskild åtgärd om du inte vill att enheten ska startas om när MSI-baserade appar installeras. Välj Appinstallation kan tvinga fram omstart av enhet, om du vill att appinstallationen ska slutföras utan att åsidosätta omstart. Välj Intune tvingar fram obligatorisk omstart av enhet, om enheten alltid ska starta om efter en lyckad appinstallation.",
- "header": "Ange kommandon för att installera och avinstallera appen:",
- "installCommand": "Installationskommando",
- "installCommandMaxLengthErrorMessage": "Installationskommandot får inte överskrida maxlängden på 1 024 tecken.",
- "installCommandTooltip": "Den fullständiga installationskommandoraden som används för att installera appen.",
- "runAs32Bit": "Kör installationsprogrammet och avinstallera kommandon i en 32-bitarsprocess på 64-bitarsklienter",
- "runAs32BitTooltip": "Välj Ja om du vill installera och avinstallera appen i en 32-bitarsprocess på 64-bitarsklienter. Välj Nej (standard) om du vill installera och avinstallera appen i en 64-bitarsprocess på 64-bitarsklienter. 32-bitarsklienter använder alltid en 32-bitarsprocess.",
- "runAsAccount": "Installationsbeteende",
- "runAsAccountTooltip": "Välj System om du vill installera appen för alla användare, om stöds finns. Välj Användare om du vill installera appen för den inloggade användaren på enheten. Om du har MSI-appar för flera syften kommer ändringar att hindra uppdateringar och avinstallationer från att slutföras tills det värde som tillämpades på enheten vid den ursprungliga installationen har återställts.",
- "selectorLabel": "Program",
- "uninstallCommand": "Avinstallationskommando",
- "uninstallCommandTooltip": "Den fullständiga avinstallationskommandoraden som används för att avinstallera appen."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Skapa ny",
- "createNewResourceAccountInfo": "
\r\nSkapa ett nytt resurskonto under registreringen. Resurskontot läggs till i resurskontotabellen direkt men aktiveras inte förrän enheten registreras och Surface Hub-prenumerationen har kontrollerats. Läs mer om resurskonton
\r\n ",
- "createNewResourceTitle": "Skapa nytt resurskonto",
- "deviceNameInvalid": "Enhetsnamnets format är felaktigt",
- "deviceNameRequired": "Ett enhetsnamn måste anges",
- "editResourceAccountLabel": "Redigera",
- "selectExistingCommandMenu": "Välj befintligt"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "Namnen får innehålla högst 15 tecken och får innehålla bokstäver (a–ö, A–Ö), siffror (0–9) samt bindestreck. Namnen får inte bara bestå av siffror. Namnen får inte innehålla blanksteg."
- },
- "Header": {
- "addressableUserName": "Eget namn för användare",
- "azureADDevice": "Tillhörande Microsoft Entra-enhet",
- "batch": "Grupptagg",
- "dateAssigned": "Tilldelat datum",
- "deviceAccountPwd": "Tjänstkontolösenord",
- "deviceAccountUpn": "Enhetskonto",
- "deviceDisplayName": "Enhetsnamn",
- "deviceFriendlyName": "Eget namn på enhet",
- "deviceName": "Enhetsnamn",
- "deviceUseType": "Typ av enhetsanvändning",
- "enrollmentState": "Registreringsstatus",
- "intuneDevice": "Tillhörande Intune-enhet",
- "lastContacted": "Senast kontaktad",
- "make": "Tillverkare",
- "model": "Modell",
- "profile": "Tilldelad profil",
- "profileStatus": "Profilstatus",
- "purchaseOrderId": "Inköpsorder",
- "resourceAccount": "Resurskonto",
- "serialNumber": "Serienummer",
- "userPrincipalName": "Användare"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Ett eget namn krävs",
- "pwdRequired": "Ett lösenord måste anges.",
- "pwdValidFormat": "Det gick inte att uppdatera lösenordet. Värdet för det nya lösenordet uppfyller inte domänens krav på längd eller komplexitet.",
- "upnRequired": "Ett enhetskonto krävs",
- "upnValidFormat": "Värden kan innehålla bokstäver (a-z, A-Z), siffror (0-9) och bindestreck. Värden får inte innehålla blanksteg."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Möten och presentation",
- "teamCollaboration": "Gruppsamarbete"
- },
- "Devices": {
- "featureDescription": "Med Windows Autopilot kan du anpassa hela välkomstupplevelsen för användarna.",
- "importErrorStatus": "Vissa enheter importerades inte. Klicka här om du vill ha mer information.",
- "importPendingStatus": "Import pågår. Tid som förflutit: {0} min. Processen kan ta upp till {1} min."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Microsoft Entra-hybridanslutning",
- "activeDirectoryADLabel": "Microsoft Entra-hybridanslutning med Autopilot",
- "azureAD": "Microsoft Entra-ansluten",
- "unknownType": "Okänd typ"
- },
- "Filter": {
- "enrollmentState": "Region",
- "profile": "Profilstatus"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "Eget användarnamn måste anges."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Skapa en namngivningsmall för att lägga till namn på enheterna under registreringen.",
- "label": "Använd mall för enhetsnamn"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "För Microsoft Entra-hybridanslutna typer av Autopilot-distributionsprofiler namnges enheterna med hjälp av inställningarna i domänanslutningskonfigurationen."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MyCompany-%RAND:4%",
- "label": "Ange ett namn",
- "noDisallowedChars": "Namnet får bara innehålla alfanumeriska tecken, bindestreck, %SERIAL% eller %RAND:x%",
- "serialLength": "Det går inte att använda fler än 7 tecken med %SERIAL%",
- "validateLessThan15Chars": "Namnet får innehålla högst 15 tecken",
- "validateNoSpaces": "Datornamn får inte innehålla mellanslag",
- "validateNotAllNumbers": "Namnet måste även innehålla bokstäver och/eller bindestreck",
- "validateNotEmpty": "Namnet får inte vara tomt",
- "validateOnlyOneMacro": "Namnet får bara innehålla ett av %SERIAL% eller %RAND:x%"
+ "ScopeTypes": {
+ "allDevices": "Alla enheter",
+ "allUsers": "Alla användare",
+ "allUsersAndDevices": "Alla användare och alla enheter",
+ "selectedGroups": "Valda grupper"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Beskrivning",
+ "placeholder": "Ange en beskrivning"
+ },
+ "NameTextBox": {
+ "label": "Namn",
+ "placeholder": "Ange ett namn"
+ },
+ "PublisherTextBox": {
+ "label": "Publisher",
+ "placeholder": "Ange en utgivare"
+ },
+ "VersionTextBox": {
+ "label": "Version"
+ },
+ "headerDescription": "Skapa ett nytt anpassat skriptpaket av de identifierings- och reparationsskript du har skrivit."
},
- "ConfigureComputerNameTemplate": {
- "description": "Skapa ett unikt namn för dina enheter. Namnen får innehålla högst 15 tecken, och bokstäver (a–ö, A–Ö), siffror (0–9) och bindestreck. Namnen får inte bara bestå av siffror. Namnen får inte innehålla blanksteg. Använd makrot %SERIAL% om du vill lägga till ett serienummer för maskinvara. Du kan också använda makrot %RAND:x% om du vill lägga till en slumpmässig siffersträng där x är lika med antalet siffror som ska läggas till."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Aktivera möjligheten att trycka på Windows-tangenten 5 gånger för att köra välkomstprogrammet utan användarautentisering för att registrera enheten och installera alla systemappar och inställningar. Användarappar och inställningar levereras när användaren loggar in.",
- "label": "Tillåt förallokerad distribution"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Autopilot Microsoft Entra-hybridanslutningsflödet fortsätter även om ingen domänkontrollantanslutning upprättas under välkomstprogrammet.",
- "label": "Hoppa över AD-anslutningskontroll"
- },
- "accountType": "Användarkontotyp",
- "accountTypeInfo": "Ange huruvida användarna ska vara administratörer eller standardanvändare på enheten. Tänk på att den här inställningen inte gäller globala administratörskonton eller företagsadministratörskonton. De här kontona kan inte vara standardanvändarkonton eftersom de har åtkomst till administrativa funktioner i Microsoft Entra ID.",
- "configOOBEInfo": "
\r\nStäll in välkomstprogrammet för Autopilot-enheter\r\n
",
- "configureDevice": "Distributionsläge",
- "configureDeviceHintForSurfaceHub2": "Autopilot har bara stöd för självdistributionsläge för Surface Hub 2. I det läget kopplas inte användaren till den registrerade enheten så inga användarautentiseringsuppgifter krävs.",
- "configureDeviceHintForWindowsPC": "
\r\n Distributionsläget avgör om en användare måste ange autentiseringsuppgifter för att etablera enheten.\r\n
\r\n
\r\n
\r\n Användarbaserat: Enheterna är kopplade till den användare som registrerar enheten och det krävs användarautentiseringsuppgifter för att etablera enheten\r\n
\r\n
\r\n Självdistribution (förhandsversion): Enheterna är inte kopplade till den användare som registrerar enheten och inga användarautentiseringsuppgifter krävs för att etablera enheten\r\n
\r\n
",
- "createSurfaceHub2Info": "Ställ in Autopilot-registreringsinställningarna för dina Surface Hub 2-enheter. Som standard är det möjligt att hoppa över användarautentisering i Autopilot under välkomstprogrammet. Läs mer om Windows Autopilot för Surface Hub 2.",
- "createWindowsPCInfo": "\r\n
\r\nFöljande alternativ aktiveras automatiskt för Autopilot-profiler i självdistributionsläge:\r\n
\r\n
\r\n
\r\n Hoppa över val av användning på arbete eller hemma\r\n
\r\n
\r\n Hoppa över OEM-registrering och OneDrive-konfiguration\r\n
\r\n
\r\n Hoppa över användarautentisering i välkomstupplevelsen\r\n
\r\n
",
- "endUserDevice": "Användarbaserat",
- "hideEscapeLink": "Dölj alternativ för att ändra konto",
- "hideEscapeLinkInfo": "Alternativen för att ändra konto och börja om med ett annat konto visas på företagsinloggningssidan första gången enheten ställs in respektive på domänfelsidan. Om du vill dölja alternativen måste du ställa in företagsanpassning i Microsoft Entra ID (Windows 10, 1809 eller senare eller Windows 11 krävs).",
- "info": "Inställningarna för AutoPilot-profilen avgör vilken välkomstupplevelse användarna får när de startar Windows för första gången. ",
- "language": "Språk (region)",
- "languageInfo": "Ange det språk och den region som ska användas.",
- "licenseAgreement": "Licensvillkor för programvara från Microsoft",
- "licenseAgreementInfo": "Ange om licensavtalet ska visas för användarna.",
- "plugAndForgetDevice": "Självdistribution",
- "privacySettingWarning": "Standardvärdet för diagnostikdatainsamlingen har ändrats för enheter som kör Windows 10, version 1903 och senare eller Windows 11. ",
- "privacySettings": "Sekretessinställningar",
- "privacySettingsInfo": "Ange om sekretessinställningar ska visas för användarna.",
- "showCortanaConfigurationPage": "Cortana-konfiguration",
- "showCortanaConfigurationPageInfo": "Med Visa aktiveras introduktionen till Cortana-konfiguration under starten.",
- "skipEULAWarning": "Viktig information om att dölja licensvillkor",
- "skipKeyboardSelection": "Konfigurera tangentbord automatiskt",
- "skipKeyboardSelectionInfo": "Om värdet är true hoppar du över sidan med val av tangentbord om språk är inställt.",
- "subtitle": "AutoPilot-profiler",
- "title": "Välkomstupplevelse (OOBE)",
- "useOSDefaultLanguage": "Standardoperativsystem",
- "userSelect": "Användarval"
- },
- "Sync": {
- "lastRequestedLabel": "Senaste synkroniseringsbegäran",
- "lastSuccessfulLabel": "Senast slutförda synkronisering",
- "syncInProgress": "Synkronisering pågår. Kom tillbaka snart.",
- "syncInitiated": "Synkronisering av AutoPilot-inställningarna har initierats.",
- "syncSettingsTitle": "Synkronisera AutoPilot-inställningar"
- },
- "Title": {
- "devices": "Windows AutoPilot-enheter"
- },
- "Tooltips": {
- "addressableUserName": "Hälsningsnamn som visas när enheten ställs in.",
- "azureADDevice": "Gå till enhetsinformationen för tillhörande enhet. Saknas betyder att det inte finns någon tillhörande enhet.",
- "batch": "Ett strängattribut som kan användas för att identifiera en grupp enheter. Fältet Grupptagg i Intune mappar till OrderID-attributet på Microsoft Entra-enheter.",
- "dateAssigned": "Tidsstämpel för när profilen tilldelades enheten.",
- "deviceAccountPwd": "Lösenord för enhetskonto för Surface Hub enheter. Om du anger det fyller du även i enhetskontot och det egna namnet.",
- "deviceAccountUpn": "E-post för enhetskonto för Surface Hub enheter. Om du anger det fyller du även i lösenordet för enhetskontot och det egna namnet.",
- "deviceDisplayName": "Ange ett unikt namn för en enhet. Det här namnet ignoreras i Microsoft Entra-hybridanslutna distributioner. Enhetsnamnet kommer fortfarande från domänanslutningsprofilen för Microsoft Entra-hybridenheter.",
- "deviceFriendlyName": "Eget namn på enheten för Surface Hub enheter. Om du anger det fyller du även i lösenordet för enhetskontot och enhetskontot.",
- "deviceName": "Namnet som visas när någon försöker identifiera och ansluta till enheten.",
- "deviceUseType": " Enheten installeras baserat på ditt val. Du kan alltid ändra det här senare i inställningarna.\r\n
\r\n
För möten och presentationer aktiveras inte Windows Hello och data tas bort efter varje session.\r\n
\r\n
För gruppsamarbete aktiveras Windows Hello och profiler sparas för snabb inloggning
\r\n
",
- "enrollmentState": "Anger om enheten är registrerad.",
- "intuneDevice": "Gå till enhetsinformationen för tillhörande enhet. Saknas betyder att det inte finns någon tillhörande enhet.",
- "lastContacted": "Tidsstämpel för när enheten senast kontaktades.",
- "make": "Den valda enhetens tillverkare.",
- "model": "Den valda enhetens modell",
- "profile": "Namn på den profil som har tilldelats enheten.",
- "profileStatus": "Anger om en profil har tilldelats enheten.",
- "purchaseOrderId": "Inköpsorder-ID",
- "resourceAccount": "Enhetens identitet eller användarhuvudnamn (UPN).",
- "serialNumber": "Den valda enhetens serienummer.",
- "userPrincipalName": "Användare för ifylld autentisering när enheten ställs in."
- },
- "allDevices": "Alla enheter",
- "allDevicesAlreadyAssignedError": "En Autopilot-profil har redan tilldelats Alla enheter.",
- "assignFailedDescription": "Det gick inte att uppdatera tilldelningar för {0}.",
- "assignFailedTitle": "Det gick inte att uppdatera Autopilot-profiltilldelningar.",
- "assignSuccessDescription": "Tilldelningar har uppdaterats för {0}.",
- "assignSuccessTitle": "Autopilot-profiltilldelningarna har uppdaterats.",
- "assignSufaceHub2ProfileNextStep": "Nästa steg i distributionen",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Koppla den här profilen till minst en enhetsgrupp",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Koppla ett resurskonto till varje Surface Hub-enhet som profilen ska distribueras till",
- "assignedDevicesCount": "Tilldelade enheter",
- "assignedDevicesResourceAccountDescription": "
Om du vill distribuera den här profilen till en enhet måste du tilldela enheten ett resurskonto. Välj en enhet åt gången om du vill tilldela ett befintligt resurskonto eller skapa ett nytt. Läs mer om resurskonton
",
- "assignedDevicesResourceAccountStatusBarMessage": "I den här tabellen visas bara Surface Hub 2-enheter som har tilldelats den här profilen.",
- "assigningDescription": "Uppdaterar tilldelningar för {0}.",
- "assigningTitle": "Uppdaterar Autopilot-profiltilldelningar.",
- "autoremediationContext": "Vi har upptäckt en maskinvaruändring på den här enheten. Vi försöker registrera den nya maskinvaran automatiskt. Du behöver inte göra något nu; kommer statusen att uppdateras vid nästa incheckning med resultatet. Läs mer om hur du återställer profilen.",
- "autoremediationTitle": "Enheten {0} har en väntande korrigering",
- "cannotDeleteMessage": "Den här profilen har tilldelats grupper. Du måste ta bort tilldelningen för alla grupper från den här profilen innan du kan ta bort den.",
- "cannotDeleteTitle": "Det går inte att ta bort {0}",
- "createdDateTime": "Skapad",
- "deleteMessage": "Om du tar bort den här AutoPilot-profilen visas alla enheter som är tilldelade till den här profilen som otilldelade.",
- "deleteMessageWithPolicySet": "{0} ingår i en eller flera principuppsättningar. Om du tar bort {0} kan du inte längre tilldela den via de principuppsättningarna.",
- "deleteTitle": "Vill du ta bort den här profilen?",
- "description": "Beskrivning",
- "deviceType": "Enhetstyp",
- "deviceUse": "Enhetsanvändning",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot har bara stöd för Microsoft Entra-anslutning för Surface Hub 2-enheter. Ange hur enheter ska ansluta till Active Directory (AD) i din organisation.\r\n
\r\n
\r\n
\r\n Microsoft Entra-anslutning: Enbart molnet utan en lokal Windows Server Active Directory.\r\n
\r\n Ange hur enheter ska ansluta till Active Directory (AD) i din organisation:\r\n
\r\n
\r\n
\r\n Microsoft Entra-ansluten: Enbart molnet utan en lokal Windows Server Active Directory\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Ett fel uppstod när antalet tilldelade enheter hämtades.",
- "getAssignmentsError": "Ett fel inträffade när Autopilot-profiltilldelningarna hämtades.",
- "harvestDeviceId": "Omvandla alla målenheter till Autopilot",
- "harvestDeviceIdDescription": "Den här profilen kan som standard bara tillämpas på Autopilot-enheter som har synkroniserats från Autopilot-tjänsten.",
- "harvestDeviceIdInfo": "\r\n Välj Ja om du vill registrera alla målenheter på Autopilot om de inte redan är registrerade. Nästa gång registrerade enheter genomgår Windows välkomstprogram kommer de genomgå det tilldelade Autopilot-scenariot.\r\n \r\n Tänk på att det för vissa Autopilot-scenarier krävs särskilda minimiversioner av Windows. Se till att din enhet har den minimiversion som krävs för att genomgå scenariot.\r\n \r\n Berörda enheter tas inte bort från Autopilot när profilen tas bort. Om du vill ta bort enheten från Autopilot använder du vyn över Windows Autopilot-enheter.\r\n ",
- "harvestDeviceIdWarning": "Efter omvandlingen kan du bara återställa Autopilot-enheter genom att ta bort dem från listan över Autopilot-enheter.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Med Windows AutoPilot-distributionsprofiler kan du anpassa hela välkomstupplevelsen för dina enheter.",
- "invalidProfileNameMessage": "Tecknet \"{0}\" är inte tillåtet",
- "joinTypeLabel": "Anslut till Microsoft Entra ID som",
- "lastModifiedDateTime": "Senast ändrad:",
- "manualRemediationContext": "Vi har upptäckt en maskinvaruändring på den här enheten. Den får inte automatiskt en Autopilot-profil när den återställs om du inte registrerar enheten igen. Läs mer om hur du återställer profilen.",
- "manualRemediationTitle": "Enheten {0} behöver din uppmärksamhet",
- "name": "Namn",
- "noAutopilotProfile": "Inga AutoPilot-profiler",
- "notEnoughPermissionAssignedError": "Du har inte behörighet att koppla den här profilen till en eller flera av de valda grupperna. Kontakta administratören.",
- "profile": "profil",
- "resourceAccountStatusBarMessage": "Ett resurskonto krävs för varje Surface Hub 2-enhet som den här profilen har distribuerats till. Klicka här om du vill läsa mer.",
- "selectServices": "Välj katalogtjänsten som enheter ska ansluta till",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Distributionsläge",
- "windowsPCCommandMenu": "Windows-dator",
- "directoryServiceLabel": "Anslut till Microsoft Entra ID som"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Administrationsgrupper",
- "RoleAssignmentAdminDesc": "Administrationsgruppanvändare är de administratörer som har tilldelats den här rollen",
- "rolesMenuTitle": "Endpoint Manager-roller",
- "RoleAssignmentScopeDesc": "Administratörer i den här rolltilldelningen kan tillämpa principer, program och fjärraktiviteter",
- "RoleAssignmentScope": "Omfångsgrupper"
- },
+ "ScopeTags": {
+ "headerDescription": "Välj en eller flera grupper som skriptpaketet ska tilldelas."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Identifieringsskript",
+ "placeholder": "Ange skripttext",
+ "requiredValidationMessage": "Ange identifieringsskriptet"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Framtvinga signaturkontroll av skript"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Kör det här skriptet med inloggningsuppgifterna"
+ },
+ "RemediationScript": {
+ "infoBox": "Skriptet körs i läget för endast identifiering eftersom det inte finns något reparationsskript."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Reparationsskript",
+ "placeholder": "Ange skripttext"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Kör skript i 64-bitars PowerShell"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Ogiltigt skript. Ett eller flera tecken i skriptet är ogiltiga."
+ },
+ "headerDescription": "Skapa ett anpassat skriptpaket av de skript du skrivit. Skripten körs som standard på tilldelade enheter en gång om dagen.",
+ "infoBox": "Det här skriptet är skrivskyddat. Några av inställningarna för skriptet kan ha inaktiverats."
+ },
+ "title": "Skapa anpassat skript",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Intervall",
+ "time": "Datum och tid"
+ },
+ "Interval": {
+ "day": "Upprepas varje dag",
+ "days": "Upprepas var {0}:e dag",
+ "hour": "Upprepas en gång i timmen",
+ "hours": "Upprepas var {0}:e timme",
+ "month": "Upprepas varje månad",
+ "months": "Upprepas var {0}:e månad",
+ "week": "Upprepas varje vecka",
+ "weeks": "Upprepas var {0}:e vecka"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) på {1}",
+ "withDate": "{0} kl. {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Redigera: {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10,0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Misslyckas bara med valda blockeringsappar i teknikfasen",
- "apps": "appar",
- "appsListName": "Programlista",
- "blockingApps": "Blockera appar",
- "managedApps": "Hanterade appar",
- "noApps": "Inga program",
- "noAppsError": "Fel när program hämtades",
- "selectApps": "Välj appar",
- "selectedAppsCount": "{0} appar har valts (max 100)",
- "useSelectedAppsAll": "Alla",
- "useSelectedAppsSelected": "Markerat",
- "useSelectedAppsToggleLabel": "Blockera enheten tills de begärda apparna har installerats, om de är kopplade till användaren/enheten"
- },
- "Header": {
- "application": "Program",
- "publisher": "Utgivare",
- "version": "Version"
- },
- "SearchBox": {
- "ariaLabel": "Sök efter appar",
- "placeHolder": "Sök efter namn eller utgivare"
- },
- "allowToUseToggle": "Tillåt användare att använda enheten om det uppstår fel under installationen",
- "blockToggle": "Blockera användning av enheten tills alla appar och profiler har installerats",
- "blockToolTip": "Om du till exempel lägger till Microsoft Word i den här listan kan riktade användare och enheter inte lämna sidan för registreringsstatus förrän Word har installerats.",
- "collectLogToggle": "Aktivera sidan med logginsamling och diagnostik för slutanvändare",
- "create": "Skapa profil",
- "customMessageTextBox": "Felmeddelande",
- "customMessageToggle": "Visa anpassat meddelande vid tidsgräns eller fel",
- "enableForAutopilotOnlyToggle": "Visa bara sidan för enheter som har etablerats via välkomstprogrammet",
- "installQualityUpdatesToggle": "Installera Windows-kvalitetsuppdateringar (kan starta om enheten) (förhandsversion)",
- "progressToggle": "Visa inställningsförlopp för appar och profiler",
- "resetToggle": "Tillåt användare att återställa enheten om det uppstår fel vid installationen",
- "timeout": "Visa ett fel när installationen tar länge tid än angivet antal minuter"
- },
+ "OfficeUpdateChannel": {
+ "current": "Aktuell kanal",
+ "deferred": "Halvårskanal för företag",
+ "firstReleaseCurrent": "Aktuell kanal (förhandsversion)",
+ "firstReleaseDeferred": "Halvårskanal för företag (förhandsversion)",
+ "monthlyEnterprise": "Månadskanal för företag",
+ "placeHolder": "Välj en"
+ },
"TableHeaders": {
"activity": "Aktivitet",
"activityName": "Namn på aktivitet",
@@ -1293,30 +417,175 @@
"excludedGroups": "Grupper som undantas",
"licenseType": "Licenstyp"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Konfigurera de PIN-koder och autentiseringsuppgifter som användarna måste ange för att få åtkomst till appar i ett arbetssammanhang."
- },
- "DataProtection": {
- "infoText": "Den här gruppen omfattar kontroller för dataförlustskydd, som begränsningar för klipp ut, kopiera, klistra in och spara som. De här inställningarna fastställer hur användarna samverkar med data i apparna."
- },
- "DeviceTypes": {
- "selectOne": "Markera minst en enhetstyp."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Riktat till appar på alla typer av enheter"
- },
- "infoText": "Välj hur du vill tillämpa den här principen på appar på olika enheter. Lägg sedan till minst en app.",
- "selectOne": "Välj minst en app för att skapa en princip."
- }
- },
- "AssignmentAction": {
- "exclude": "Undantaget",
- "include": "Inklusive",
- "includeAllDevicesVirtualGroup": "Inklusive",
- "includeAllUsersVirtualGroup": "Inklusive"
- },
+ "Inputs": {
+ "accountDomain": "Kontodomän",
+ "accountDomainHint": "t.ex. contosodomain",
+ "accountDomainInfoBalloon": "Ange användarens kontodomän.",
+ "accountTypeInfoBalloon": "Ange den kontotyp som har ställts in baserat på autentiseringsmodell",
+ "allowContactSetting": "Tillåt användaren att ändra kontaktinställning",
+ "allowContactSyncInfoBalloon": "Ange om användaren får ändra inställningen för kontaktsynkronisering",
+ "allowUserChange": "Tillåt användaren att ändra inställning",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Ange ett paketnamn liknande com.microsoft.word",
+ "androidUrlValidation": "Ange en giltig webbadress av typen https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "Appinstallationskontext",
+ "appUrlLabel": "Webbadress till appbutik",
+ "appleUrlValidation": "Ange en giltig webbadress i formatet https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Tillämplig enhetstyp",
+ "assignmentActionLabel": "Läge",
+ "authenticationMethodInfoBalloon": "Ange autentiseringsmetod för användaren",
+ "authenticationMetod": "Autentiseringsmetod",
+ "authenticationType": "Autentiseringstyp",
+ "authenticationTypeInfoBalloon": "Ange autentiseringstyp för användaren",
+ "availableLicenseCount": "Tillgängliga licenser",
+ "basicAuth": "Grundläggande autentisering",
+ "biometricsInfoBalloon": "Användarna kan behöva använda biometrik, till exempel TouchID och FaceID, för att öppna appen på sina enheter. Om så är fallet används biometrik utöver den autentiseringsmetod som valts i profilen. Den här inställningen bör inte aktiveras när Intune-principer för appskydd har distribuerats eftersom appskyddsprincipen omfattar åtkomstkrav innan hanterade data kan öppnas. Om båda alternativen är aktiverade ställs flera åtkomstkrav för att öppna Outlook Mobile. När alternativet inte är konfigurerat är standardappinställningen Av. ",
+ "bookNameLabel": "Namn på bok",
+ "bundleDescriptionHint": "Ange en beskrivning av apparna i samlingen.",
+ "calendar": "Kalender",
+ "categoryLabel": "Kategori",
+ "categoryNameLabel": "Standardnamn",
+ "certProfileType": "Typ av certifikatprofil",
+ "certificate": "Certifikat",
+ "certificates": "Certifikat",
+ "commandLineLabel": "Kommandoradsargument",
+ "commandLineSizeHint": "Texten i kommandoradsargumenten får innehålla högst 1 024 tecken",
+ "configurationSettingsFormatLabel": "Format för konfigurationsinställningar",
+ "configurationSettingsLabel": "Inställningsformat",
+ "contactSync": "Spara kontakter",
+ "contactSyncInfoBalloon": "När kontakter sparas i mobilens inbyggda adressbok kan nya samtal och sms länkas till användarens befintliga Outlook-kontakter. När alternativet inte är konfigurerat är standardappinställningen Av.",
+ "contacts": "Kontakter",
+ "createdDateTime": "Skapad",
+ "defaultCategoryHint": "Standardkategorierna kan inte ändras",
+ "deploySMimeCertsFromIntune": "Distribuera S/MIME-certifikat från Intune",
+ "descriptionGenericLabel": "Beskrivning",
+ "descriptionHint": "Ange en beskrivning…",
+ "descriptionLabel": "Beskrivning",
+ "descriptionSizeHint": "Beskrivningen får innehålla högst 10 000 tecken",
+ "developerLabel": "Utvecklare",
+ "developerSizeHint": "Utvecklarens namn får innehålla högst 256 tecken.",
+ "disable": "Inaktivera",
+ "disabled": "Inaktiverat",
+ "displayNameLabel": "Namn",
+ "displayVersionHint": "Ange appversionen",
+ "displayVersionLabel": "Appversion",
+ "displayVersionLengthCheck": "Visningsversionen får innehålla högst 130 tecken",
+ "eBookCategoryNameLabel": "Standardnamn",
+ "emailAccount": "Namn på e-postkonto",
+ "emailAccountHint": "t.ex. e-post för företag",
+ "emailAccountInfoBalloon": "Ange visningsnamn för e-postkontot som det visas för användarna på deras enheter",
+ "emailAddressAttribute": "E-postadressattribut från Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Ange den e-postadress som ska användas för att skicka och ta emot e-post",
+ "emailServer": "E-postserver",
+ "emailServerHint": "t.ex. mail.contoso.com",
+ "emailServerInfoBalloon": "Ange värdnamnet för Exchange Server",
+ "enable": "Aktivera",
+ "enableSMime": "Aktivera S/MIME",
+ "enabled": "Aktiverad",
+ "encryptAllEmails": "Kryptera alla mejl",
+ "encryptionCertificates": "Krypteringscertifikat",
+ "endUserNotifications": "Slutanvändarmeddelanden",
+ "enrollmentTypeLabel": "Registreringstyp för enhet",
+ "externalRecipients": "E-posttips om externa mottagare",
+ "externalRecipientsInfoBalloon": "E-posttips om externa mottagare visas om avsändaren lägger till en extern mottagare eller en distributionsgrupp som innehåller externa mottagare. Avsändarna meddelas när ett mejl de skriver ska lämna organisationen, och hjälper dem att fatta rätt beslut om ordval, tonläge och innehåll. Endast tillgängligt för Exchange Online-konton och lokala konton som använder modern hybridautentisering. När alternativet inte är konfigurerat är standardappinställningen På.",
+ "focusedInbox": "Prioriterad inkorg",
+ "focusedInboxInfoBalloon": "Prioriterad inkorg delar upp inkorgen i två flikar: Prioriterad och Övrig. Dina viktigaste mejl visas på fliken Prioriterad medan resten flyttas till fliken Övrig, fortfarande lättillgängligt. När alternativet inte är konfigurerat är standardappinställningen På. ",
+ "fullScreenEnabledLabel": "Helskärm",
+ "gmailNineAmountOfEmail": "Mängd e-post som ska synkroniseras",
+ "gmailNineAuthenticationMethodInfoBalloon": "Välj hur du vill att användarna ska autentiseras på e-postservern. Använd certifikat för att ge användarna den säkraste och smidigaste upplevelsen. Certifikatbaserad autentisering kan inte användas ännu eftersom SCEP- och PKCS-certifikatprofiler för enhetsägarenheter inte är tillgängliga. ",
+ "gmailNineCertificateUPNInfoBalloon": "Certifikatet måste innehålla användarens huvudnamn (UPN) som alternativt certifikatmottagarnamn.",
+ "gmailNineEmailAddressInfoBalloon": "Attributet som Intune får från Microsoft Entra ID för att dynamiskt generera den e-postadress som ska användas av den här profilen, t.ex. MittNamn@contoso.com (UPN). Läs mer om Microsoft Entra-attribut för e-postprofiler.",
+ "gmailNineEmailServerInfoBalloon": "Exchange-platsen (webbadress) för den e-postsserver som den angivna appen ansluter till för att hämta e-post.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Styr hur stor mängd e-post klienten ska synkronisera.",
+ "gmailNineSSLInfoBalloon": "Aktivera SSL för att skydda all kommunikation med e-postservern.",
+ "gmailNineUsernameInfoBalloon": "Attributet som Intune får från Microsoft Entra ID för att dynamiskt generera det användarnamnet som ska användas av den här profilen, t.ex. MittNamn@contoso.com (UPN) eller MyName (användarnamn). Läs mer om Microsoft Entra-attribut för e-postprofiler.",
+ "ignoreManifestScope": "Ignorera manifestets omfång",
+ "ignoreVersionDetection": "Ignorera appversion",
+ "informationUrlLabel": "Webbadress till information",
+ "informationUrlSizeHint": "Informationswebbadressen får bestå av högst 1 024 tecken.",
+ "installAsManaged": "Installera som hanterat",
+ "installationSourceLabel": "Apptyp",
+ "installerTypeInfoBalloon": "Installationstypen för programpaketet.",
+ "installerTypeLabel": "Installationstyp",
+ "isFeatured": "Visa den här som aktuell app på företagsportalen",
+ "isMAMEnabledToggleLabel": "Ja",
+ "lastModifiedDateTime": "Senast uppdaterad",
+ "ldapUrl": "LDAP-webbadress",
+ "licensingType": "Har stöd för tilldelning av enhetssammanhang",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Lägsta operativsystemsversion",
+ "modernAuth": "Modern autentisering",
+ "nameHint": "Ange ett namn",
+ "nameLabel": "Namn",
+ "nameSizeHint": "Namnet får innehålla högst 512 tecken.",
+ "notConfigured": "Inte konfigurerat",
+ "notesLabel": "Anteckningar",
+ "notesSizeHint": "Anteckningstexten får innehålla högst 1 024 tecken.",
+ "notificationType": "Meddelandetyp",
+ "oneDay": "En dag",
+ "oneMonth": "En månad",
+ "oneWeek": "En vecka",
+ "outlookSMimeSettings": "Outlook S/MIME-inställningar",
+ "ownerLabel": "Ägare",
+ "ownerSizeHint": "Ägarens namn får innehålla högst 256 tecken.",
+ "packageIdLabel": "Paketidentifierare",
+ "packageNameLabel": "Paketnamn",
+ "pivCredentialNotConfigured": "Du har inte valt någon utfärdare av härledda autentiseringsuppgifter för klientorganisationen. Du måste först ställa in en utfärdare innan du kan tillämpa principen på enheter.",
+ "platformLabel": "Plattform",
+ "policyDescriptionLabel": "Beskrivning",
+ "policyNameLabel": "Namn",
+ "preComposedIconEnabled": "Förkomponerat",
+ "primarySMTPAddress": "Primär SMTP-adress",
+ "privacyUrlLabel": "Sekretesswebbadress",
+ "publisherHint": "Ange ett utgivarnamn",
+ "publisherLabel": "Utgivare",
+ "publisherSizeHint": "Namnet på utgivaren måste innehålla mellan 2 och 1 024 tecken",
+ "require": "Kräv",
+ "requireBiometrics": "Kräv biometrik för att få åtkomst till appen",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "Minst en omfångstagg krävs",
+ "searchAppLabel": "Välj app",
+ "searchAppLinkText": "Sök i App Store",
+ "searchWinGetPublicRepositoryLinkText": "Sök i Windows Package Manager communitylagringsplats",
+ "searchWinGetStoreRepositoryLinkText": "Sök i appen Microsoft Store (ny)",
+ "selectAAD": "Välj ett Microsoft Entra-attribut",
+ "selectAppFileLabel": "Välj fil",
+ "selectAppFileLinkText": "Välj appaketfil",
+ "selectAppFileToUpdateLabel": "Välj fil som ska uppdateras",
+ "selectAuthMethod": "Välj en autentiseringsmetod",
+ "selectAuthType": "Välj en autentiseringstyp",
+ "selectCatalogAppLabel": "Välj app",
+ "selectCatalogAppLinkText": "Sök i företagsappkatalogen",
+ "selectCertificate": "Välj ett certifikat",
+ "signAllEmails": "Signera alla mejl",
+ "signingCertificates": "Signeringscertifikat",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Beskrivning av svit",
+ "suiteNameLabel": "Namn på svit",
+ "targetApplicationBundleIdentifier": "Målidentifiering av programpaket",
+ "targetedPlatformsLabel": "Riktad plattform",
+ "tasks": "Aktiviteter",
+ "threeDays": "Tre dagar",
+ "totalLicenseCount": "Totalt antal licenser",
+ "twoWeeks": "Två veckor",
+ "unifiedAssignmentsLabel": "Tilldela till:",
+ "unlimited": "Obegränsad",
+ "urlHint": "Ange en giltig webbadress",
+ "useManagedBrowserHint": "Endast Android och iOS. Läs mer",
+ "useManagedBrowserLabel": "Det krävs en hanterad webbläsare för att öppna den här länken",
+ "userPrinicipalName": "Användarens huvudnamn",
+ "username": "Användarnamn",
+ "usernameAttribute": "Användarnamnsattribut från Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Ange UPN-namnet (User Principal Name) för den e-postprofil som ska användas för att autentisera kontot",
+ "usernamePassword": "Användarnamn och lösenord",
+ "webAppUrlHint": "Ange en giltig URL som börjar med http:// eller https://",
+ "webAppUrlLabel": "Appens webbadress",
+ "webAppUrlSizeHint": "App URL:en får högst bestå av 1024 tecken.",
+ "windowsUrlValidation": "Ange en giltig URL som liknar https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "XML-data har angetts",
+ "xmlFormatInvalid": "XML-principformatet är ogiltigt.",
+ "xmlTooLarge": "Storleken på indata måste vara mindre än 1 MB."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Berörda användare kan endast använda den näst högst prioriterade samhanteringsutfärdarsidan eller standardsidan för samhanteringsutfärdare, om ingen annan samhanteringsutfärdarsida har tilldelats.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Samhanteringsutfärdare",
"settingDescription": "I samhanteringsinställningarna fastställs vem som äger arbetsbelastningarna."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise-systemapp",
- "androidForWorkApp": "App från hanterad Google Play-butik",
- "androidLobApp": "Branschspecifik Android-app",
- "androidStoreApp": "Google Play-app",
- "builtInAndroid": "Inbyggd Android-app",
- "builtInApp": "Inbyggd app",
- "builtInIos": "Inbyggd iOS-app",
- "default": "",
- "iosIPadOSWebClip": "Webbklipp för iOS/iPadOS",
- "iosLobApp": "Branschspecifik iOS-app",
- "iosStoreApp": "iOS Store-app",
- "iosVppApp": "Volyminköpsprogramapp för iOS",
- "lineOfBusinessApp": "Branschspecifik app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Verksamhetsspecifik macOS-app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365-appar (macOS)",
- "macOSPkgApp": "macOS-app (PKG)",
- "macOSWebClip": "macOS-webbklipp",
- "macOsVppApp": "Volyminköpsprogramapp för macOS",
- "managedAndroidLobApp": "Hanterad branschspecifik Android-app",
- "managedAndroidStoreApp": "Hanterad Google Play-app",
- "managedGooglePlayApp": "App från hanterad Google Play-butik",
- "managedGooglePlayPrivateApp": "Privat app från hanterad Google Play-butik",
- "managedGooglePlayWebApp": "Hanterad Google Play-webblänk",
- "managedIosLobApp": "Hanterad branschspecifik iOS-app",
- "managedIosStoreApp": "Hanterad iOS Store-app",
- "microsoftStoreForBusinessApp": "Microsoft Store för företag-app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store för företag",
- "officeSuiteApp": "Microsoft 365-applikationer (Windows 10 och senare)",
- "webApp": "Webblänk",
- "windowsAppXLobApp": "Branschspecifik Windows AppX-app",
- "windowsClassicApp": "Windows-app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 och senare)",
- "windowsMobileMsiLobApp": "Branschspecifik Windows MSI-app",
- "windowsPhone81AppXBundleLobApp": "Branschspecifik Windows Phone 8.1 AppX-app",
- "windowsPhone81AppXLobApp": "Branschspecifik Windows Phone 8.1 AppX-app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 Store-app",
- "windowsPhoneXapLobApp": "Branschspecifik Windows Phone XAP-app",
- "windowsStoreApp": "Microsoft Store app (äldre)",
- "windowsUniversalAppXLobApp": "Branschspecifik Windows Universal AppX-app",
- "windowsUniversalLobApp": "Branschspecifik universell Windows-app",
- "windowsWebApp": "Windows-webblänk"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Rekommenderas",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrain",
+ "countryNameZA": "Sydafrika",
+ "countryNameJO": "Jordanien",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Tjeckien",
+ "countryNameLT": "Litauen",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hongkong SAR",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Saudiarabien",
+ "countryNamePG": "Papua Nya Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "Indien",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Rumänien",
+ "countryNameKZ": "Kazakstan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Georgien",
+ "countryNameTT": "Trinidad och Tobago",
+ "countryNameMP": "Nordmarianerna",
+ "countryNameMV": "Maldiverna",
+ "countryNameFI": "Finland",
+ "countryNameNO": "Norge",
+ "countryNameEE": "Estland",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Uzbekistan",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tadzjikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "Frankrike",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italien",
+ "countryNameAZ": "Azerbajdzjan",
+ "countryNameKG": "Kirgizistan",
+ "countryNameWF": "Wallis och Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falklandsöarna",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "Sydsudan",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Syrien",
+ "countryNameMD": "Moldavien",
+ "countryNameVC": "Saint Vincent och Grenadinerna",
+ "countryNameID": "Indonesien",
+ "countryNameRE": "Réunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "Nordmakedonien",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Franska Polynesien",
+ "countryNameKY": "Caymanöarna",
+ "countryNameIO": "Brittiska territoriet i Indiska Oceanen",
+ "countryNameRU": "Ryssland",
+ "countryNameMA": "Marocko",
+ "countryNameAU": "Australien",
+ "countryNameBO": "Bolivia",
+ "countryNameVA": "Heliga stolen (Vatikanstaten)",
+ "countryNameVG": "Brittiska Jungfruöarna",
+ "countryNameFM": "Mikronesien",
+ "countryNameAQ": "Antarktis",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brasilien",
+ "countryNameIS": "Island",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgarien",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamas",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macao SAR",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "Amerikanska Samoa",
+ "countryNameBQ": "Bonaire, Sint Eustatius och Saba",
+ "countryNameMF": "Saint Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Nya Kaledonien",
+ "countryNameAC": "Ascensionön",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladesh",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Kanada",
+ "countryNameSH": "Sankta Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongoliet",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Kamerun",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japan",
+ "countryNameCY": "Cypern",
+ "countryNameCD": "Demokratiska republiken Kongo",
+ "countryNameTN": "Tunisien",
+ "countryNameTR": "Turkiet",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Sverige",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Kambodja",
+ "countryNamePL": "Polen",
+ "countryNameDZ": "Algeriet",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Egypten",
+ "countryNameGF": "Franska Guyana",
+ "countryNameNZ": "Nya Zeeland",
+ "countryNamePS": "Den palestinska myndigheten",
+ "countryNameIL": "Israel",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Grekland",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauretanien",
+ "countryNameVI": "Amerikanska Jungfruöarna",
+ "countryNameGQ": "Ekvatorialguinea",
+ "countryNameMX": "Mexiko",
+ "countryNameDJ": "Djibouti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "Kina",
+ "countryNameMZ": "Moçambique",
+ "countryNameBV": "Bouvetön",
+ "countryNameNF": "Norfolkön",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "Sydgeorgien och Sydsandwichöarna",
+ "countryNameRS": "Serbien",
+ "countryNameCC": "Kokosöarna",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Tyskland",
+ "countryNameCG": "Republiken Kongo",
+ "countryNameKW": "Kuwait",
+ "countryNameMH": "Marshallöarna",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Vitryssland",
+ "countryNameMY": "Malaysia",
+ "countryNameST": "São Tomé och Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Tchad",
+ "countryNameCX": "Julön",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bissau",
+ "countryNameUA": "Ukraina",
+ "countryNameCU": "Kuba",
+ "countryNameCO": "Colombia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Kroatien",
+ "countryNameSC": "Seychellerna",
+ "countryNameNL": "Nederländerna",
+ "countryNameUM": "Förenta staternas mindre öar i Oceanien och Västindien",
+ "countryNameIM": "Isle of Man",
+ "countryNameFJ": "Fiji",
+ "countryNameSR": "Surinam",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "Storbritannien",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovenien",
+ "countryNameAM": "Armenien",
+ "countryNameAR": "Argentina",
+ "countryNamePM": "Saint Pierre och Miquelon",
+ "countryNameTF": "De franska territorierna i södra Indiska oceanen",
+ "countryNameDO": "Dominikanska republiken",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "Centralafrikanska republiken",
+ "countryNameBE": "Belgien",
+ "countryNameKM": "Komorerna",
+ "countryNameLY": "Libyen",
+ "countryNameIE": "Irland",
+ "countryNameKP": "Nordkorea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slovakien",
+ "countryNameTC": "Turks- och Caicosöarna",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Jemen",
+ "countryNameBA": "Bosnien och Hercegovina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Irak",
+ "countryNameSJ": "Svalbard och Jan Mayen",
+ "countryNameAX": "Åland",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Färöarna",
+ "countryNameBL": "Saint Barthélemy",
+ "countryNameLB": "Libanon",
+ "countryNameJM": "Jamaica",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Spanien",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapore",
+ "countryNameAL": "Albanien",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Swaziland",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d’Ivoire",
+ "countryNameTW": "Taiwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cooköarna",
+ "countryNameTH": "Thailand",
+ "countryNameHM": "Heardön och McDonaldöarna",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "USA",
+ "countryNameAT": "Österrike",
+ "countryNameKR": "Sydkorea",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Danmark",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Etiopien",
+ "countryNameMG": "Madagaskar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxemburg",
+ "countryNameQA": "Qatar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Salomonöarna",
+ "countryNameAE": "Förenade Arabemiraten",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua och Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Ungern",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Schweiz",
+ "countryNamePN": "Pitcairn",
+ "countryNameGL": "Grönland",
+ "countryNamePH": "Filippinerna",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts och Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Lettland",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Upphovsperson",
+ "template": "Mallnamn"
+ },
+ "Row": {
+ "ariaLabel": "rad {0} av {1} kolumn {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Börja från början och välj de egenskaper du vill använda i biblioteket med tillgängliga lageregenskaper"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Börja från början och välj önskade inställningar från biblioteket med tillgängliga inställningar",
+ "title": "Inställningskatalog"
+ },
+ "Templates": {
+ "subtitle": "Mallar innehåller grupper av inställningar, sorterade efter funktion. Använd en mall när du inte vill sätta upp principer manuellt eller vill ge enheter behörighet till företagsnätverk, till exempel konfigurering av trådlös anslutning eller VPN.",
+ "title": "Mallar"
+ },
+ "noData": "Inga principmallar hittades"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge app rekommenderade SmartScreen-inställningar: Windows 10 i molnkonfigurationsmallen. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Slutpunktsidentifiering och svar"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "App- och webbläsarisolering",
+ "aSRApplicationControl": "Programreglering",
+ "aSRAttackSurfaceReduction": "Regler för minskning av attackytan",
+ "aSRDeviceControl": "Enhetskontroll",
+ "aSRExploitProtection": "Sårbarhetsskydd",
+ "aSRWebProtection": "Webbskydd (äldre Microsoft Edge)",
+ "aVExclusions": "Microsoft Defender Antivirus-uteslutning",
+ "antivirus": "Microsoft Defender Antivirus",
+ "cloudPC": "Windows 365-säkerhetsbaslinje",
+ "default": "Slutpunktsskydd",
+ "defenderTest": "Demonstration av Microsoft Defender för Endpoint",
+ "diskEncryption": "BitLocker",
+ "eDR": "Slutpunktsidentifiering och svar",
+ "edgeSecurityBaseline": "Microsoft Edge-baslinje",
+ "edgeSecurityBaselinePreview": "Förhandsversion: Microsoft Edge-baslinje",
+ "editionUpgradeConfiguration": "Utgåveuppgradering och lägesväxling",
+ "firewall": "Windows-brandvägg",
+ "firewallRules": "Windows-brandväggsregler",
+ "identityProtection": "Kontoskydd",
+ "identityProtectionPreview": "Kontoskydd (förhandsversion)",
+ "mDMSecurityBaseline1810": "MDM-säkerhetsbaslinje för Windows 10 och senare för oktober 2018",
+ "mDMSecurityBaseline1810Preview": "Förhandsversion: MDM-säkerhetsbaslinje för Windows 10 och senare för oktober 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Förhandsversion: MDM-säkerhetsbaslinje för Windows 10 för oktober 2018 (beta)",
+ "mDMSecurityBaseline1906": "MDM-säkerhetsbaslinje för Windows 10 och senare för maj 2019",
+ "mDMSecurityBaseline2004": "MDM-säkerhetsbaslinje för Windows 10 och senare för augusti 2020",
+ "mDMSecurityBaseline2101": "MDM-säkerhetsbaslinje för Windows 10 och senare december 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS-brandvägg",
+ "microsoftDefenderBaseline": "Baslinjeinställning för Microsoft Defender för Endpoint",
+ "office365Baseline": "Microsoft Office O365-baslinje",
+ "office365BaselinePreview": "Förhandsversion: Microsoft Office O365-baslinje",
+ "securityBaselines": "Säkerhetsbaslinjer",
+ "test": "Testmall",
+ "testFirewallRulesSecurityTemplateName": "Windows-brandväggsregler (test)",
+ "testIdentityProtectionSecurityTemplateName": "Kontoskydd (test)",
+ "windowsSecurityExperience": "Windows-säkerhetsupplevelse"
+ },
+ "Firewall": {
+ "mDE": "Windows-brandvägg"
+ },
+ "FirewallRules": {
+ "mDE": "Windows-brandväggsregler"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "Inställningar för flytt av känd mapp i OneDrive: Windows 10 i molnkonfigurationsmallen. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Kontoskydd",
+ "administrativeTemplates": "Administrativa mallar",
+ "androidCompliancePolicy": "Kompatibilitetsprincip för Android",
+ "aospDeviceOwnerCompliancePolicy": "Kompatibilitetsprincip för Android (AOSP)",
+ "applicationControl": "Appkontroll för företag",
+ "attackSurfaceReductionRules": "Regler för att minska attackytan",
+ "bitlocker": "BitLocker",
+ "custom": "Anpassad",
+ "deliveryOptimization": "Leveransoptimering",
+ "derivedPersonalIdentityVerificationCredential": "Härledd autentiseringsuppgift",
+ "deviceControl": "Enhetskontroll",
+ "deviceFeatures": "Enhetsfunktioner",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Enhetslås",
+ "deviceOwner": "Fullständigt hanterad, särskilt avsedd och företagsägd arbetsprofil",
+ "deviceRestrictions": "Enhetsbegränsningar",
+ "deviceRestrictionsWindows10Team": "Enhetsbegränsningar (Windows 10 Team)",
+ "domainJoinPreview": "Domänanslutning",
+ "editionUpgradeAndModeSwitch": "Utgåveuppgradering och lägesväxling",
+ "education": "Utbildning",
+ "email": "E-post",
+ "emailSamsungKnoxOnly": "Cookies (endast Samsung KNOX)",
+ "endpointProtection": "Slutpunktsskydd",
+ "expeditedCheckin": "Konfiguration för hantering av mobil enhet",
+ "exploitProtection": "Sårbarhetsskydd",
+ "extensions": "Tillägg",
+ "hardwareConfigurations": "BIOS-konfigurationer och andra inställningar",
+ "identityProtection": "Identitetsskydd",
+ "iosCompliancePolicy": "Kompatibilitetsprincip för iOS",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Redigera användargruppsmedlemskap",
+ "macCompliancePolicy": "Kompatibilitetsprincip för Mac",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365-applikationer för säkerhetsbaslinje för företag",
+ "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus-uteslutning",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender för Endpoint (stationära enheter som kör Windows 10 eller senare)",
+ "microsoftDefenderFirewallRules": "Windows-brandväggsregler",
+ "microsoftDefenderforEndpointSecurityBaseline": "Säkerhetsbaslinje för Microsoft Defender för Endpoint",
+ "microsoftEdgeBaseline": "Säkerhetsbaslinje för Microsoft Edge",
+ "mxProfileZebraOnly": "MX-profil (endast Zebra)",
+ "networkBoundary": "Nätverksgräns",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Åsidosätt grupprincip",
+ "pkcsCertificate": "PKCS-certifikat",
+ "pkcsImportedCertificate": "PKCS-importerat certifikat",
+ "preferenceFile": "Prioritetsfil",
+ "presets": "Förinställningar",
+ "scepCertificate": "SCEP-certifikat",
+ "secureAssessmentEducation": "Begränsad provmiljö (utbildning)",
+ "securityBaselineForHololens2Advanced": "Avancerad säkerhetsbaslinje för HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standardsäkerhetsbaslinje för HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Säkerhetsbaslinje för Microsoft Edge",
+ "settingsCatalog": "Inställningskatalog",
+ "sharedMultiUserDevice": "Delad enhet för flera användare",
+ "softwareUpdates": "Programuppdateringar",
+ "trustedCertificate": "Betrott certifikat",
+ "unknown": "Okänd",
+ "unsupported": "Stöds inte",
+ "vpn": "VPN",
+ "wiFi": "Trådlöst",
+ "wiFiImport": "Trådlöst (import)",
+ "windows10CompliancePolicy": "Kompatibilitetsprincip för Windows 10/11",
+ "windows10MobileCompliancePolicy": "Kompatibilitetsprincip för Windows 10 Mobile",
+ "windows10XScep": "SCEP-certifikat – TEST",
+ "windows10XTrustedCertificate": "Betrott certifikat – TEST",
+ "windows10XVPN": "VPN – TEST",
+ "windows10XWifi": "WIFI – TEST",
+ "windows11SecurityBaseline": "Säkerhetsbaslinje för Windows 10 och senare",
+ "windows365SecurityBaseline": "Windows 365-säkerhetsbaslinje",
+ "windows8CompliancePolicy": "Kompatibilitetsprincip för Windows 8",
+ "windowsHealthMonitoring": "Hälsoövervakning i Windows",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Kompatibilitetsprincip för Windows Phone",
+ "windowsUpdateforBusiness": "Windows Update för företag",
+ "wiredNetwork": "Kabelanslutet nätverk",
+ "workProfile": "Privatägd arbetsprofil"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Gör uppdateringen tillgänglig gradvis",
+ "immediateStart": "Gör uppdateringen tillgänglig så snart som möjligt",
+ "startDateOnly": "Gör uppdateringen tillgänglig på ett visst datum"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Neka automatiskt",
+ "autoGrant": "Bevilja automatiskt",
+ "prompt": "Fråga"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Platsåtkomst (ungefärlig)",
+ "accessFineLocation": "Platsåtkomst (exakt)",
+ "addVoicemail": "Lägg till röstbrevlåda",
+ "bodySensors": "Tillåt kroppssensordata",
+ "bodySensorsBackground": "Tillåt bakgrundssensordata för brödtext",
+ "callPhone": "Ringa telefonsamtal",
+ "camera": "Kamera",
+ "getAccounts": "Hämta konton",
+ "nearbyDevices": "Enheter i närheten",
+ "nearbyWifiDevices": "WiFi-enheter i närheten",
+ "postNotifications": "Publicera meddelanden",
+ "processOutgoingCalls": "Bearbeta utgående samtal",
+ "readCalendar": "Kalender (läsa)",
+ "readCallLog": "Samtalslogg (läsa)",
+ "readContacts": "Kontakter (läsa)",
+ "readExternalStorage": "Extern lagring (läsa)",
+ "readMediaAudio": "Medieljud (läs)",
+ "readMediaImages": "Mediebilder (läs)",
+ "readMediaVideo": "Medievideo (läs)",
+ "readPhoneState": "Telefonstatus (läsa)",
+ "readSMS": "Sms (läsa)",
+ "receiveMMS": "Mms (ta emot)",
+ "receiveSMS": "Sms (ta emot)",
+ "receiveWAPPush": "WAP push-meddelanden (ta emot)",
+ "recordAudio": "Spela in ljud",
+ "sendSMS": "Sms (skicka)",
+ "useSIP": "Använd SIP-tjänst",
+ "writeCalendar": "Kalender (skriva)",
+ "writeCallLog": "Samtalslogg (skriva)",
+ "writeContacts": "Kontakter (skriva)",
+ "writeExternalStorage": "Extern lagring (skriva)"
+ },
+ "RemoveDialog": {
+ "description": "Vill du ta bort behörigheten?",
+ "title": "Ta bort"
+ },
+ "TableHeader": {
+ "permission": "Behörighet",
+ "permissionGroup": "Behörighetsgrupp",
+ "permissionName": "Namn på behörighet",
+ "permissionState": "Behörighetsstatus"
+ },
+ "addButtonLabel": "+ Lägg till",
+ "addPermissionTableDescription": "Ange de behörigheter du vill åsidosätta. Om du inte väljer eller anger dem specifikt används standardinställningen.",
+ "addPermissionsTitle": "Lägg till behörigheter",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Mer information om behörigheter för Android-körning",
+ "permissionTableDescription": "De behörigheter som beviljas här åsidosätter principen ”Standardbehörigheter för app” för de valda apparna.",
+ "permissionsTitle": "Behörigheter"
+ },
+ "AssignmentAction": {
+ "exclude": "Undantaget",
+ "include": "Inklusive",
+ "includeAllDevicesVirtualGroup": "Inklusive",
+ "includeAllUsersVirtualGroup": "Inklusive"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search som standard",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype för företag",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "Filen eller mappen enligt angivet krav.",
+ "pathToolTip": "Den fullständiga sökvägen till den fil eller mapp som ska identifieras.",
+ "property": "Egenskap",
+ "valueToolTip": "Välj ett kravvärde som matchar den valda identifieringsmetoden. Krav på datum och tid måste anges i lokalt format."
+ },
+ "GridColumns": {
+ "pathOrScript": "Sökväg/skript",
+ "type": "Typ"
+ },
+ "Registry": {
+ "keyPath": "Nyckelsökväg",
+ "keyPathTooltip": "Den fullständiga sökvägen till registerposten som innehåller värdet enligt krav.",
+ "operator": "Operator",
+ "operatorTooltip": "Välj operator för jämförelsen.",
+ "registryRequirement": "Registernyckelkrav",
+ "registryRequirementTooltip": "Välj jämförelse av registernyckelkrav.",
+ "valueName": "Värdenamn",
+ "valueNameTooltip": "Namnet på begärt registervärde."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Fil",
+ "registry": "Register",
+ "script": "Skript"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Boolesk",
+ "dateTime": "Datum och tid",
+ "float": "Flyttal",
+ "integer": "Heltal",
+ "string": "Sträng",
+ "version": "Version"
+ },
+ "duplicateName": "Skriptnamnet {0} har redan använts. Ange ett annat namn.",
+ "enforceSignatureCheck": "Framtvinga signaturkontroll av skript",
+ "enforceSignatureCheckTooltip": "Välj Ja om du vill kontrollera att skriptet har signerats av en betrodd utgivare så att skriptet körs utan varningar eller uppmaningar. Skriptet körs avblockerat. Välj Nej (standard) om du vill köra skriptet med slutanvändarens bekräftelse men utan signaturkontroll.",
+ "loggedOnCredentials": "Kör det här skriptet med inloggningsuppgifterna",
+ "loggedOnCredentialsTooltip": "Kör skript med enhetens inloggningsuppgifter.",
+ "operatorTooltip": "Välj operator för kravjämförelsen.",
+ "requirementMethod": "Välj typ av utdata",
+ "requirementMethodTooltip": "Välj den datatyp som används vid fastställande av krav på identifieringsmatchning.",
+ "scriptContent": "Skriptinnehåll",
+ "scriptFile": "Skriptfil",
+ "scriptFileTooltip": "Välj ett PowerShell-skript som identifierar förekomst av appen på klienten. Om appen har identifierats visar kravprocessen en slutkod med värdet 0 och skriver strängvärdet STDOUT.",
+ "scriptName": "Skriptets namn",
+ "value": "Värde",
+ "valueTooltip": "Välj ett kravvärde som matchar den valda identifieringsmetoden. Krav på datum och tid måste anges i lokalt format."
+ },
+ "bladeTitle": "Lägg till en kravregel",
+ "createRequirementHeader": "Skapa ett krav.",
+ "header": "Ställ in ytterligare kravregler",
+ "label": "Ytterligare kravregler",
+ "noRequirementsSelectedPlaceholder": "Inga krav har angetts.",
+ "requirementType": "Kravtyp",
+ "requirementTypeTooltip": "Välj typ av identifieringsmetod som ska användas för att fastställa hur ett krav ska utvärderas."
+ },
+ "architectures": "Operativsystemarkitektur",
+ "architecturesTooltip": "Välj de arkitekturer som behövs för att installera appen.",
+ "bladeTitle": "Krav",
+ "diskSpace": "Diskutrymme som krävs (MB)",
+ "diskSpaceTooltip": "Ledigt diskutrymme som krävs på systemenheten för att installera appen.",
+ "header": "Ange krav som måste uppfyllas på enheterna innan appen kan installeras:",
+ "maximumTextFieldValue": "Det här värdet måste åtminstone vara {0}.",
+ "minimumCpuSpeed": "Lägsta processorhastighet som krävs (MHz)",
+ "minimumCpuSpeedTooltip": "Lägsta processorhastighet som krävs för att installera appen.",
+ "minimumLogicalProcessors": "Lägsta antal logiska processorer som krävs",
+ "minimumLogicalProcessorsTooltip": "Lägsta antal logiska processorer som behövs för att installera appen.",
+ "minimumOperatingSystem": "Lägsta operativsystemsversion",
+ "minimumOperatingSystemTooltip": "Välj det minimioperativsystem som behövs för att installera appen.",
+ "minumumTextFieldValue": "Värdet måste vara minst {0}.",
+ "physicalMemory": "Fysiskt minne som krävs (MB)",
+ "physicalMemoryTooltip": "Fysiskt minne (RAM) som krävs för att installera appen.",
+ "selectorLabel": "Krav",
+ "validNumber": "Ange ett giltigt tal."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filter",
+ "assignmentFilterTypeColumnHeader": "Filterläge",
+ "assignmentToast": "Slutanvändarmeddelanden",
+ "assignmentTypeTableHeader": "TILLDELNINGSTYP",
+ "autoUpdate": "Automatisk uppdatering",
+ "deadlineTimeColumnLabel": "Tidsgräns för installation",
+ "deliveryOptimizationPriorityHeader": "Prioritet för leveransoptimering",
+ "groupTableHeader": "Grupp",
+ "installContextLabel": "Installationssammanhang",
+ "isRemovable": "Installera som flyttbart",
+ "licenseTypeLabel": "Licenstyp",
+ "modeTableHeader": "Gruppläge",
+ "policySet": "Principuppsättning",
+ "preventAutoAppUpdate": "Förhindra automatiska uppdateringar av appar",
+ "preventManagedAppBackup": "Förhindra säkerhetskopiering av iCloud-app",
+ "restartGracePeriodHeader": "Respitperiod för omstart",
+ "startTimeColumnLabel": "Tillgänglighet",
+ "tracks": "Spår",
+ "uninstallOnRemoval": "Avinstallera när enheten tas bort",
+ "updateMode": "Uppdateringsprioritet",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD-webbapp",
+ "androidEnterpriseSystemApp": "Android Enterprise-systemapp",
+ "androidForWorkApp": "App från hanterad Google Play-butik",
+ "androidLobApp": "Branschspecifik Android-app",
+ "androidStoreApp": "Google Play-app",
+ "builtInAndroid": "Inbyggd Android-app",
+ "builtInApp": "Inbyggd app",
+ "builtInIos": "Inbyggd iOS-app",
+ "iosIPadOSWebClip": "Webbklipp för iOS/iPadOS",
+ "iosLobApp": "Branschspecifik iOS-app",
+ "iosStoreApp": "iOS Store-app",
+ "iosVppApp": "Volyminköpsprogramapp för iOS",
+ "lineOfBusinessApp": "Branschspecifik app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Verksamhetsspecifik macOS-app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office-paket",
+ "macOSPkgApp": "macOS-app (PKG)",
+ "macOSWebClip": "macOS-webbklipp",
+ "macOsVppApp": "Volyminköpsprogramapp för macOS",
+ "managedAndroidLobApp": "Hanterad branschspecifik Android-app",
+ "managedAndroidStoreApp": "Hanterad Google Play-app",
+ "managedGooglePlayApp": "App från hanterad Google Play-butik",
+ "managedGooglePlayPrivateApp": "Privat app från hanterad Google Play-butik",
+ "managedGooglePlayWebApp": "Hanterad Google Play-webblänk",
+ "managedIosLobApp": "Hanterad branschspecifik iOS-app",
+ "managedIosStoreApp": "Hanterad iOS Store-app",
+ "microsoftStoreForBusinessApp": "Microsoft Store för företag-app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store för företag",
+ "officeAddIn": "Office-tillägg",
+ "officeSuiteApp": "Microsoft 365-applikationer (Windows 10 och senare)",
+ "sharePointApp": "SharePoint-app",
+ "teamsApp": "Teams-app",
+ "webApp": "Webblänk",
+ "win32CatalogApp": "Windows-katalogapp (Win32)",
+ "winGetPublicApp": "Windows Package Manager communitylagringsplats",
+ "winGetStoreApp": "Microsoft Store app (ny)",
+ "windowsAppXLobApp": "Branschspecifik Windows AppX-app",
+ "windowsClassicApp": "Windows-app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 och senare)",
+ "windowsMobileMsiLobApp": "Branschspecifik Windows MSI-app",
+ "windowsPhone81AppXBundleLobApp": "Branschspecifik Windows Phone 8.1 AppX-app",
+ "windowsPhone81AppXLobApp": "Branschspecifik Windows Phone 8.1 AppX-app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 Store-app",
+ "windowsPhoneXapLobApp": "Branschspecifik Windows Phone XAP-app",
+ "windowsStoreApp": "Microsoft Store app (äldre)",
+ "windowsUniversalAppXLobApp": "Branschspecifik Windows Universal AppX-app",
+ "windowsUniversalLobApp": "Branschspecifik universell Windows-app",
+ "windowsWebApp": "Windows-webblänk"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Webben",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Undantaget",
+ "include": "Inklusive",
+ "includeAllDevicesVirtualGroup": "Inklusive",
+ "includeAllUsersVirtualGroup": "Inklusive"
+ },
+ "AssignmentToast": {
+ "hideAll": "Dölj alla popup-meddelanden",
+ "showAll": "Visa alla popup-meddelanden",
+ "showReboot": "Visa popup-meddelanden om omstart av dator"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Ja",
+ "notConfigured": "Nej"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Bakgrund",
+ "displayText": "Innehållsnedladdning i {0}",
+ "foreground": "Förgrund",
+ "header": "Prioritet för leveransoptimering"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Appinstallation kan tvinga fram omstart av enhet",
+ "basedOnReturnCode": "Bestäm beteende baserat på returkoder",
+ "force": "Intune tvingar fram obligatorisk omstart av enhet",
+ "suppress": "Ingen särskild åtgärd"
+ },
+ "FilterType": {
+ "exclude": "Undanta",
+ "include": "Ta med",
+ "none": "Inget"
+ },
+ "InstallIntent": {
+ "available": "Tillgängligt för registrerade enheter",
+ "availableWithoutEnrollment": "Tillgänglig med eller utan registrering",
+ "notApplicable": "Saknas",
+ "required": "Obligatoriskt",
+ "uninstall": "Avinstallera"
+ },
+ "SettingType": {
+ "assignmentType": "Tilldelningstyp",
+ "deviceLicensing": "Licenstyp",
+ "installContext": "Avinstallera när enheten tas bort",
+ "toastSettings": "Slutanvändarmeddelanden",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Standardinställning",
+ "postponed": "Uppskjuten",
+ "priority": "Hög prioritet"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Misslyckad",
+ "hardReboot": "Hård omstart",
+ "retry": "Försök igen",
+ "softReboot": "Mjuk omstart",
+ "success": "Klart"
+ },
+ "Columns": {
+ "codeType": "Kodtyp",
+ "returnCode": "Returkod"
+ },
+ "bladeTitle": "Returkoder",
+ "gridAriaLabel": "Returkoder",
+ "header": "Ange returkoder för att visa på funktionssätt efter installation:",
+ "onAddAnnounceMessage": "Returkod vid tillagt objekt {0} av {1}",
+ "onDeleteSuccess": "Returkoden {0} har tagits bort",
+ "returnCodeAlreadyUsedValidation": "Returkoden används redan.",
+ "returnCodeMustBeIntegerValidation": "Returkoden måste vara ett heltal.",
+ "returnCodeShouldBeAtLeast": "Returkoden måste vara minst {0}.",
+ "returnCodeShouldBeAtMost": "Returkoden får vara högst {0}.",
+ "selectorLabel": "Returkoder"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone och iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Lägg till nätverksgräns",
+ "addNetworkBoundaryButton": "Lägg till nätverksgräns...",
+ "allowWindowsSearch": "Låt Windows Search söka i krypterade företagsdata och Store-appar",
+ "authoritativeIpRanges": "Listan över företagets ip-intervall är auktoritativ (identifiera inte automatiskt)",
+ "authoritativeProxyServers": "Listan över företagsproxyservrar är auktoritativ (identifiera inte automatiskt)",
+ "boundaryType": "Gränstyp",
+ "cloudResources": "Molnresurser",
+ "corporateIdentity": "Företagsidentitet",
+ "dataRecoveryCert": "Ladda upp ett certifikat för dataåterställningsagenten för att tillåta återställning av krypterade data",
+ "editNetworkBoundary": "Redigera nätverksgräns",
+ "enrollmentState": "Registreringsstatus",
+ "iPv4Ranges": "IPv4-intervall",
+ "iPv6Ranges": "IPv6-intervall",
+ "internalProxyServers": "Interna proxyservrar",
+ "maxInactivityTime": "Maximal tid (i minuter) som får passera innan en inaktiv enhet låses med PIN-kod eller lösenord",
+ "maxPasswordAttempts": "Antal autentiseringsförsök som tillåts innan enheten rensas",
+ "mdmDiscoveryUrl": "Webbadress till MDM-identifiering",
+ "mdmRequiredSettingsInfo": "Principen avser endast Windows 10 Anniversary och högre. Med den här principen används Windows informationsskydd (WIP) som skydd.",
+ "minimumPinLength": "Ange lägsta antal tillåtna tecken för PIN-kod",
+ "name": "Namn",
+ "networkBoundariesGridEmptyText": "Alla nätverksgränser du lägger till visas här",
+ "networkBoundary": "Nätverksgräns",
+ "networkDomainNames": "Nätverksdomäner",
+ "neutralResources": "Neutrala resurser",
+ "passportForWork": "Använd Windows Hello för företag som inloggningsmetod i Windows",
+ "pinExpiration": "Ange tidsperiod (i dagar) som en PIN-kod får användas innan användaren måste ändra den",
+ "pinHistory": "Ange antalet tidigare PIN-koder som kan kopplas till ett användarkonto och som inte kan återanvändas",
+ "pinLowercaseLetters": "Ställ in användning av gemener i PIN-koden för Windows Hello för företag",
+ "pinSpecialCharacters": "Ställ in användning av specialtecken i PIN-koden för Windows Hello för företag",
+ "pinUppercaseLetters": "Ställ in användning av versaler i PIN-koden för Windows Hello för företag",
+ "protectUnderLock": "Förhindra appars tillgång till företagsdata när enheten är låst. Gäller endast Windows 10 Mobile",
+ "protectedDomainNames": "Skyddade domäner",
+ "proxyServers": "Proxyservrar",
+ "requireAppPin": "Inaktivera appens PIN-kod när enhetens PIN-kod hanteras",
+ "requiredSettings": "Nödvändiga inställningar",
+ "requiredSettingsInfo": "Om du ändrar omfång eller tar bort principen dekrypteras företagsinformationen.",
+ "revokeOnMdmHandoff": "Återkalla åtkomst till skyddade data när enheten registreras i MDM",
+ "revokeOnUnenroll": "Återkalla krypteringsnycklar vid avregistrering",
+ "rmsTemplateForEdp": "Ange det mall-ID som ska användas för Azure RMS",
+ "showWipIcon": "Visa symbol för företagsdataskydd",
+ "type": "Typ",
+ "useRmsForWip": "Använd Azure RMS för Windows informationsskydd",
+ "value": "Värde",
+ "weRequiredSettingsInfo": "Principen avser endast Windows 10 Creators Update och högre. Med den här principen används Windows informationsskydd (WIP) och Windows MAM som skydd.",
+ "wipProtectionMode": "Läget för Windows informationsskydd",
+ "withEnrollment": "Med registrering",
+ "withoutEnrollment": "Utan registrering"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "arabiska",
+ "bulgarian": "bulgariska",
+ "chineseSimplified": "kinesiska (förenklad)",
+ "chineseTraditional": "kinesiska (traditionell)",
+ "croatian": "kroatiska",
+ "czech": "tjeckiska",
+ "danish": "danska",
+ "dutch": "nederländska",
+ "englishUK": "engelska (Storbritannien)",
+ "englishUS": "engelska (USA)",
+ "estonian": "estniska",
+ "finnish": "finska",
+ "frenchCanada": "franska (Kanada)",
+ "frenchFrance": "franska (Frankrike)",
+ "german": "tyska",
+ "greek": "grekiska",
+ "hebrew": "hebreiska",
+ "hungarian": "ungerska",
+ "italian": "italienska",
+ "japanese": "japanska",
+ "korean": "koreanska",
+ "latvian": "lettiska",
+ "lithuanian": "litauiska",
+ "norwegian": "norska, bokmål",
+ "polish": "polska",
+ "portugueseBrazil": "portugisiska (Brasilien)",
+ "portuguesePortugal": "portugisiska (Portugal)",
+ "romanian": "rumänska",
+ "russian": "ryska",
+ "serbian": "serbiska",
+ "slovak": "slovakiska",
+ "slovenian": "slovenska",
+ "spanishMexico": "spanska (Mexiko)",
+ "spanishSpain": "spanska (Spanien)",
+ "swedish": "svenska",
+ "thai": "Thailand",
+ "turkish": "turkiska",
+ "ukrainian": "ukrainska"
+ },
+ "Summary": {
+ "placeholder": "Välj ett aviseringsmeddelande från vänster och förhandsvisa innehållet."
+ },
+ "companyContact": "Visa kontaktuppgifter",
+ "companyLogo": "Visa företagslogotyp",
+ "companyName": "Visa företagsnamn",
+ "createEditDescription": "Skapa eller redigera mallar för aviseringsmeddelanden.",
+ "createMessage": "Skapa meddelande",
+ "deviceDetails": "Visa enhetsinformation",
+ "deviceDetailsInfoBox": "Den här inställningen är inaktiverad som standard eftersom hämtning av enhetsinformation kan orsaka en fördröjning i e-postaviseringar som tas emot.",
+ "editImpactInfo": "När du redigerar den här notismeddelandemallen påverkas alla principer där mallen används.",
+ "editMessage": "Redigera meddelande",
+ "email": "e-post",
+ "emailFooterTitle": "E-postsidfot",
+ "emailHeaderFooterInfo": "Inställningarna för e-posthuvud och sidfot för e-postmeddelanden beror på de anpassade inställningarna för klientadministratörsnoden i Endpoint Manager.",
+ "emailHeaderTitle": "E-postsidhuvud",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Ställ in anpassningsinställningar",
+ "formSubTitle": "Skapa eller ändra e-postaviseringar",
+ "headerFooterSettingsTab": "Inställningar för sidhuvud och sidfot",
+ "imgPreview": "Förhandsvisning av avbildning",
+ "infotext": "Välj ett aviseringsmeddelande. Om du vill skapa en ny avisering går du till Aviseringar i hanteringsavsnittet i arbetsbelastningen Ange enhetsefterlevnad.",
+ "iwLink": "Visa länken till företagsportalens webbplats",
+ "listEmpty": "Inga meddelandemallar.",
+ "listEmptySelectOnly": "Inga meddelandemallar. Om du vill skapa en ny avisering går du till Aviseringar i hanteringsavsnittet i arbetsbelastningen Ange enhetsefterlevnad.",
+ "listSubTitle": "Lista över mallar för e-postaviseringar",
+ "listTitle": "Mallar för aviseringsmeddelanden",
+ "localizedNotificationMessageTemplates": "Lokaliserade aviseringsmeddelandemallar",
+ "messageAssigned": "Det går inte att ta bort meddelandemallen eftersom den används av en eller flera efterlevnadsprinciper.",
+ "messageCapitalized": "Mall för aviseringsmeddelande",
+ "messageLowercase": "mall för aviseringsmeddelande",
+ "missingDefaultError": "Välj en standardmall",
+ "notificationMessageTemplates": "Mallar för aviseringsmeddelanden",
+ "rowValidationError": "Minst en meddelandemall måste anges",
+ "selectDescription": "Välj en e-postavisering. Om du vill skapa en ny avisering går du till Aviseringar i hanteringsavsnittet i arbetsbelastningen Ange enhetsefterlevnad.",
+ "tenantValueText": "Klientorganisationsvärde",
+ "testEmailLabel": "Skicka förhandsgranskad e-post",
+ "localeLabel": "Nationella inställningar",
+ "isDefaultLocale": "Är standard"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Konfigurera enheter för inledande etablering.",
+ "title": "Enhetsförberedelse"
+ },
+ "EnrollmentSettings": {
+ "description": "Konfigurera registreringsinställningar, som att blockera registrering och tilldela till användare.",
+ "title": "Registreringsinställningar"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Konfigurera inställningar som användarna kan använda för att återställa Windows från ett startbart flashminne.",
+ "menuTitle": "Återställningskonfiguration för Windows operativsystem"
+ },
+ "coManagementAuthorityDesc": "Ställ in samhanteringsinställningar för Configuration Manager-integrering",
+ "coManagementAuthorityTitle": "Samhanteringsinställningar ",
+ "deploymentProfiles": "Windows AutoPilot-distributionsprofiler",
+ "description": "Lär dig om sju olika sätt att registrera en Windows 10/11-dator på Intune av användare eller administratörer.",
+ "descriptionLabel": "Windows-registreringsmetoder",
+ "enrollmentStatusPage": "Statussidan för registrering"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Välj antalet bitar i nyckeln.",
+ "keyUsage": "Ange den kryptografiåtgärd som krävs för att byta ut certifikatets offentliga nyckel.",
+ "renewalThreshold": "Ange hur många procent (1–99 procent) av den återstående certifikatgiltighetstiden som tillåts innan förnyelse av certifikatet kan begäras. Rekommenderad mängd i Intune är 20 %. (1–99)",
+ "rootCert": "Välj en tidigare inställd och tilldelad profil för certifikatutfärdares rotcertifikat. Certifikatutfärdarcertifikatet måste matcha rotcertifikatet för den certifikatutfärdare som utfärdar certifikatet för den här profilen (den du just nu ställer in).",
+ "scepServerUrl": "Ange en webbadress för den NDES-server som utfärdar certifikat via SCEP (måste vara HTTPS), till exempel https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Lägg till en eller flera webbadresser för den NDES-server som utfärdar certifikat via SCEP (måste vara HTTPS), till exempel https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Alternativt namn för certifikatmottagare",
+ "subjectNameFormat": "Format för namn på certifikatmottagare",
+ "validityPeriod": "Tid som återstår innan certifikatet går ut. Ange ett värde som är lika med eller mindre än den giltighetstid som visas i certifikatmallen. Standardvärdet är ett år."
+ },
+ "appInstallContext": "Anger vilken installationskontext som ska kopplas till appen. För appar i dubbelläge väljer du önskad kontext för appen. För alla andra appar är det här förinställt baserat på paketet, och kan inte ändras.",
+ "autoUpdateMode": "Konfigurera appens uppdateringsprioritet. Välj Standard om du vill att enheten ska vara ansluten till WiFi, laddas och inte aktivt användas innan du uppdaterar appen. Välj Hög prioritet om du vill uppdatera appen så snart utvecklaren har publicerat appen, oavsett debiteringsstatus, WiFi-kapacitet eller slutanvändaraktivitet på enheten. Välj Uppskjutet om du vill avstå från appuppdateringar i upp till 90 dagar. Hög prioritet och uppskjuten träder endast i kraft på DO-enheter.",
+ "configurationSettingsFormat": "Formattext för konfigurationsinställningar",
+ "ignoreVersionDetection": "Ställ in på Ja för appar som uppdateras automatiskt av apputvecklaren (till exempel Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Välj Ja för appar som uppdateras automatiskt av apputvecklaren eller om du bara vill se appens bundleID innan du installerar. Välj Nej om du vill visa appens bundleID och versionsnummer innan du installerar.",
+ "installAsManagedMacOSLobApp": "Den här inställningen gäller bara macOS 11 och högre. Appen kommer att installeras men inte hanteras på macOS 10.15 och tidigare.",
+ "installContextDropdown": "Välj rätt installationssammanhang. Med användarsammanhang installeras appen enbart för den angivna användaren medan enhetssammanhang installerar appen för alla användare på enheten.",
+ "ldapUrl": "Det här är LDAP-värdnamnet där klienter kan få de offentliga krypteringsnycklarna för mejlmottagarna. Mejlen krypteras när en nyckel är tillgänglig. Format som stöds:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Välj körningsbehörigheter för den tillhörande appen.",
+ "policyAssociatedApp": "Välj en app som principen ska kopplas till.",
+ "policyConfigurationSettings": "Välj den metod som du vill använda för att definiera konfigurationsinställningarna för den här principen.",
+ "policyDescription": "Eller ange en beskrivning för konfigurationsprincipen.",
+ "policyEnrollmentType": "Välj om de här inställningarna ska hanteras via enhetshantering eller via appar som skapats med Intune SDK.",
+ "policyName": "Ange ett namn för den här konfigurationsprincipen.",
+ "policyPlatform": "Välj en plattform som ska gälla för den här appkonfigurationsprincipen.",
+ "policyProfileType": "Välj de enhetsprofiltyper som den här appkonfigurationsprofilen ska tillämpas på",
+ "policySMime": "Ange inställningar för S/MIME-signering och kryptering för Outlook.",
+ "sMimeDeployCertsFromIntune": "Ange om S/MIME-certifikat ska levereras från Intune för användning med Outlook.\r\nIntune kan automatiskt distribuera signerings- och krypteringscertifikat till användare via företagsportalen.",
+ "sMimeEnable": "Ange om S/MIME-kontroller ska aktiveras när ett mejl skrivs",
+ "sMimeEnableAllowChange": "Ange om användaren får ändra Aktivera S/MIME-inställningen.",
+ "sMimeEncryptAllEmails": "Ange om alla mejl måste krypteras.\r\nVid kryptering omvandlas data till en chiffertext som bara kan läsas av behöriga mottagare.",
+ "sMimeEncryptAllEmailsAllowChange": "Ange om användaren får ändra inställningen Kryptera alla mejl.",
+ "sMimeEncryptionCertProfile": "Ange en certifikatprofil för kryptering av e-post.",
+ "sMimeSignAllEmails": "Ange om alla mejl måste signeras.\r\nEn digital signatur kontrollerar mejlets äkthet och säkerställer att innehållet inte har manipulerats under överföringen.",
+ "sMimeSignAllEmailsAllowChange": "Ange om användaren får ändra inställningen Signera alla mejl.",
+ "sMimeSigningCertProfile": "Ange en certifikatprofil för signering av e-post.",
+ "sMimeUserNotificationType": "Metod för att meddela användarna om att de måste öppna företagsportalen för att hämta S/MIME-certifikat för Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} ingår i en eller flera principuppsättningar. Om du tar bort {0} kan du inte längre tilldela den via de principuppsättningarna. Vill ta bort den ändå?",
+ "contentWithError": "{0} kan ingå i en eller flera principuppsättningar. Om du tar bort {0} kan du inte längre tilldela den via de principuppsättningarna. Vill ta bort den ändå?",
+ "header": "Vill du ta bort den här begränsningen?"
+ },
+ "DeviceLimit": {
+ "description": "Ange högst antal enheter som en användare får registrera.",
+ "header": "Begränsningar för antal enheter",
+ "info": "Ange hur många enheter som varje användare kan registrera."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Måste vara minst 1.0.",
+ "android": "Ange ett giltigt versionsnummer. Exempel: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Ange ett giltigt versionsnummer. Exempel: 5.0, 5.1.1",
+ "iOS": "Ange ett giltigt versionsnummer. Exempel: 9.0, 10.0, 9.0.2",
+ "mac": "Ange ett giltigt versionsnummer. Exempel: 10, 10.10, 10.10.1",
+ "min": "Minimum får inte vara lägre än {0}",
+ "minMax": "Minimiversionen får inte vara högre än maxversionen.",
+ "windows": "Måste vara minst 10.0. Lämna tomt för att tillåta 8.1-enheter",
+ "windowsMobile": "Måste vara minst 10.0. Lämna tomt för att tillåta 8.1-enheter"
+ },
+ "allPlatformsBlocked": "Alla enhetsplattformar är blockerade. Tillåt plattformsregistrering för att aktivera plattformskonfiguration.",
+ "blockManufacturerPlaceHolder": "Namn på tillverkare",
+ "blockManufacturersHeader": "Blockerade tillverkare",
+ "cannotRestrict": "Begränsningen stöds inte",
+ "configurationDescription": "Ange de begränsningar för plattformskonfiguration som gäller för att registrera en enhet. Använd kompatibilitetsprinciper för att begränsa enheter efter registreringen. Ange versioner som major.minor.build. Versionsbegränsningar gäller endast för enheter som registrerats med företagsportalen. Intune klassificerar enheter som privatägda som standard. En ytterligare åtgärd krävs för att klassificera enheter som företagsägda.",
+ "configurationDescriptionLabel": "Läs mer om att ställa in registreringsbegränsningar",
+ "configurations": "Konfigurera plattformar",
+ "deviceManufacturer": "Enhetstillverkare",
+ "header": "Begränsningar av enhetstyp",
+ "info": "Ange vilka plattformar, versioner och hanteringstyper som kan registreras.",
+ "manufacturer": "Tillverkare",
+ "max": "Max",
+ "maxVersion": "Högsta version",
+ "min": "Min",
+ "minVersion": "Lägsta version",
+ "newPlatforms": "Du har tillåtit nya plattformar. Uppdatera plattformskonfigurationer.",
+ "personal": "Personligt ägd",
+ "platform": "Plattform",
+ "platformDescription": "Du kan tillåta registrering av följande plattformar. Blockera bara plattformar som du inte har stöd för. Du kan ange ytterligare registreringsbegränsningar för tillåtna plattformar.",
+ "platformSettings": "Plattformsinställningar",
+ "platforms": "Välj plattformar",
+ "platformsSelected": "{0} plattformar markerade",
+ "type": "Typ",
+ "versions": "versioner",
+ "versionsRange": "Tillåt minsta/största intervall:",
+ "windowsTooltip": "Begränsar registrering via mobilenhetshantering. Begränsar inte installation av datoragent. Det finns bara stöd för Windows 10- och Windows 11-enheter. Lämna versioner tomt för att tillåta Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Begränsningsprioriteringar har sparats."
+ },
+ "Row": {
+ "announce": "Prioritet: {0}, namn: {1}, tilldelat: {2}"
+ },
+ "Table": {
+ "deployed": "Distribuerad",
+ "name": "Namn",
+ "priority": "Prioritet"
+ },
+ "Type": {
+ "limit": "Begränsning för antal enheter",
+ "type": "Begränsning av enhetstyp"
+ },
+ "allUsers": "Alla användare",
+ "androidRestrictions": "Android-begränsningar",
+ "create": "Skapa begränsning",
+ "defaultLimitDescription": "Det här är standardbegränsningen för antal enheter som tillämpas med lägsta prioritet för alla användare oavsett gruppmedlemskap.",
+ "defaultTypeDescription": "Det här är standardbegränsningen för enhetstyper som tillämpas med lägsta prioritet för alla användare oavsett gruppmedlemskap.",
+ "defaultWhfbDescription": "Det här är standardkonfigurationen för Windows Hello för företag som tillämpas med lägsta prioritet för alla användare oavsett gruppmedlemskap.",
+ "deleteMessage": "Användare som påverkas begränsas av nästa högsta tilldelade prioritetsbegränsning eller standardbegränsningen om ingen annan begränsning har tilldelats.",
+ "deleteTitle": "Vill du ta bort begränsningen för {0}?",
+ "descriptionHint": "Kort stycke som beskriver företagsanvändning eller begränsningsnivå som anges av begränsningsinställningarna.",
+ "edit": "Redigera begränsning",
+ "info": "En enhet måste uppfylla de mest högprioriterade registreringsbegränsningarna som tilldelats användaren. Du kan dra en enhetsbegränsning om du vill ändra prioriteten. Standardbegränsningar har lägst prioritet för alla användare och styr användarlösa registreringar. En standardbegränsning kan redigeras men inte tas bort.",
+ "iosRestrictions": "iOS-begränsningar",
+ "mDM": "MDM",
+ "macRestrictions": "macOS-begränsningar",
+ "maxVersion": "Högsta version",
+ "minVersion": "Lägsta version",
+ "nameHint": "Det här är det primära attributet som visas för att identifiera begränsningsuppsättningen.",
+ "noAssignmentsStatusBar": "Koppla en begränsning till minst en grupp. Klicka på Egenskaper.",
+ "nonAdminForbiddenCreateError": "Du måste vara intune-tjänst eller global administratör för att kunna skapa, redigera eller ta bort begränsningar.",
+ "nonAdminForbiddenEdit": "Du måste vara administratör för att kunna redigera begränsningar.",
+ "notFound": "Begränsningen hittades inte. Den kanske redan har tagits bort.",
+ "personallyOwned": "Privatägda enheter",
+ "restriction": "Begränsning",
+ "restrictionLowerCase": "begränsning",
+ "restrictionType": "Begränsningstyp",
+ "selectType": "Välj begränsningstyp",
+ "selectValidation": "Välj en plattform",
+ "typeHint": "Välj begränsning för enhetstyp för att begränsa enhetsegenskaper. Välj begränsning för enhetsgräns för att begränsa antalet enheter per användare.",
+ "typeRequired": "Begränsningstyp krävs.",
+ "winPhoneRestrictions": "Windows Phone-begränsningar",
+ "windowsECv1Info": "Äldre registreringsbegränsningar kan inte redigeras eller omprioriteras, endast tas bort.",
+ "windowsECv2Info": "Du kan prioritera registreringsbegränsningar genom att dra och släppa dem. Visa standardbegränsningar och förkonfigurerade begränsningar nedan. Alla nya registreringsbegränsningar har högre prioritet än standardbegränsningar och förkonfigurerade begränsningar.",
+ "windowsRestrictions": "Windows-begränsningar",
+ "windowsRestrictionsPreview": "Filterbaserade Windows-begränsningar (förhandsversion)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 dag",
+ "twoDays": "2 dagar",
+ "zeroDays": "0 dagar"
+ },
+ "SecurityTemplate": {
+ "aSR": "Minskning av attackytan",
+ "accountProtection": "Kontoskydd",
+ "allDevices": "Alla enheter",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Antivirusrapportering (förhandsversion)",
+ "conditionalAccess": "Villkorlig åtkomst",
+ "deviceCompliance": "Enhetsefterlevnad",
+ "diskEncryption": "Diskkryptering",
+ "eDR": "Slutpunktsidentifiering och svar",
+ "ePM": "Hantering av slutpunktsprivilegier",
+ "firewall": "Brandvägg",
+ "helpSupport": "Hjälp och support",
+ "setup": "Installation",
+ "wdapt": "Microsoft Defender för Endpoint"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Inställning av dataskydd"
+ },
+ "OrganizeMailByThread": {
+ "title": "Sortera e-post efter tråd",
+ "tooltip": "Standardfunktionssättet i Outlook är att slå ihop mejlkonversationer till en trådad konversationsvy. Om inställningen är inaktiverad visas varje mejl enskilt i Outlook och grupperas inte efter tråd."
+ },
+ "Sync": {
+ "header": "Synkronisera kontaktfält med konfiguration i intern kontaktapp"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
+ "allowBiometricsTitle": "Kräv biometrik för att få åtkomst till appen",
+ "allowBiometricsTooltip": "Användarna kan behöva använda biometrik, till exempel TouchID och FaceID, för att öppna appen på sina enheter. Om så är fallet används biometrik utöver den autentiseringsmetod som valts i profilen. Den här inställningen bör inte aktiveras när Intune-principer för appskydd har distribuerats eftersom appskyddsprincipen omfattar åtkomstkrav innan hanterade data kan öppnas. Om båda alternativen är aktiverade ställs flera åtkomstkrav för att öppna Outlook Mobile. När alternativet inte är konfigurerat är standardappinställningen Av.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
+ "allowCalendarNotificationsTitle": "Kalenderaviseringar",
+ "allowCalendarNotificationsTooltip": "Tillåt att kalendernotiser visar fullständig information när appskyddsprincipens inställning Organisationsdatameddelanden är inställd på Blockera organisationsdata.",
+ "allowDefaultAppSignatureTitle": "Standardsignatur för app",
+ "allowDefaultAppSignatureTooltip": "Standardsignatur för app visar om appen ska använda Skaffa Outlook för iOS som standardsignatur när meddelanden skrivs. Om inställningen är Av, används ingen standardsignatur utan användarna kan lägga till egna signaturer. När alternativet Inte konfigurerat har valts så är standardappinställningen På.",
+ "allowExternalRecipientsMailTipTitle": "E-posttips om externa mottagare",
+ "allowExternalRecipientsMailTipTooltip": "E-posttips om externa mottagare visas om avsändaren lägger till en extern mottagare eller en distributionsgrupp som innehåller externa mottagare. Avsändarna meddelas när ett mejl de skriver ska lämna organisationen, och hjälper dem att fatta rätt beslut om ordval, tonläge och innehåll. Endast tillgängligt för Exchange Online-konton och lokala konton som använder modern hybridautentisering. När alternativet inte är konfigurerat är standardappinställningen På.",
+ "allowFocusedInboxTitle": "Prioriterad inkorg",
+ "allowFocusedInboxTooltip": "Prioriterad inkorg delar upp inkorgen i två flikar: Prioriterad och Övrig. Dina viktigaste e-postmeddelanden visas på fliken Prioriterad medan resten flyttas till fliken Övrig, fortfarande lättillgängligt. När alternativet inte är konfigurerat är standardappinställningen På.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
+ "allowMailNotificationsTitle": "E-postaviseringar",
+ "allowMailNotificationsTooltip": "Värdet anger om Outlook ska tillåta mejlaviseringar. Om värdet är Nej inaktiveras mejlaviseringar.",
+ "allowOrgDataOnWearablesTitle": "Organisationsdata på kroppsnära enheter",
+ "allowOrgDataOnWearablesTooltip": "Värdet anger om Outlook-data ska synkroniseras med en kroppsnära enhet. Om värdet är Nej inaktiveras synkronisering med kroppsnära enheter.",
+ "allowSaveContactsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen för kontaktsynkronisering.",
+ "allowSaveContactsTitle": "Spara kontakter",
+ "allowSaveContactsTooltip": "När kontakter sparas i mobilens inbyggda adressbok kan nya samtal och sms länkas till användarens befintliga Outlook-kontakter. När alternativet inte är konfigurerat är standardappinställningen Av.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
+ "allowSmartReplyTitle": "Föreslagna svar",
+ "allowSmartReplyTooltip": "När du öppnar ett meddelande kan du få svarsförslag från Office under meddelandet. Om du markerar ett förslag på svar kan du redigera det innan du skickar det. När alternativet inte är konfigurerat är standardappinställningen På.",
+ "allowUserChangeGeneralToolTip": "Ange om användaren får ändra inställningen.",
+ "allowUserChangeTitle": "Tillåt användaren att ändra inställning",
+ "blockExternalImagesAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
+ "blockExternalImagesTitle": "Blockera externa bilder",
+ "blockExternalImagesTooltip": "När Blockera externa bilder är aktiverat går det inte att ladda ned bilder från Internet som är inbäddade i meddelandetexten. När alternativet inte är konfigurerat är standardappinställningen Av.",
+ "disableAddinsTitle": "Tillåt tillägg",
+ "disableAddinsTooltip": "Som standard tillåter en appskyddsprincip att användare använder tillägg från tredje part, men kan användas för att blockera tillägg med inställningen \"Synkronisera principhanterade appdata med inbyggda appar eller tillägg\". Om du konfigurerar den här inställningen till \"Av\" blockeras tillägg när inställningen För appskyddsprincip är inställd på Tillåten.",
+ "discoverFeedTitle": "Identifieringsflöde",
+ "discoverFeedTooltip": "Identifieringsflödet täcker de Office-filer du använder mest. Det här flödet aktiveras automatiskt när Delve har aktiverats för användaren. När alternativet inte är konfigurerat är standardappinställningen På.",
+ "enableSMIMETitle": "Aktivera S/MIME",
+ "enableSMIMETooltip": "Ange om S/MIME-kontroller ska aktiveras när ett mejl skrivs.",
+ "encryptAllEmails": "Kryptera alla mejl",
+ "encryptAllEmailsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen Kryptera alla mejl.",
+ "encryptAllEmailsTooltip": "Ange om alla mejl måste krypteras. Vid kryptering omvandlas data till en chiffertext som bara kan läsas av behöriga mottagare.",
+ "ldapUrl": "LDAP-webbadress",
+ "ldapUrlTooltip": "Det här är LDAP-värdnamnet där klienter kan få de offentliga krypteringsnycklarna för mejlmottagarna. Mejlen krypteras när en nyckel är tillgänglig. Format som stöds: \r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Ange om användaren får ändra inställningen.",
+ "nativeCalendarSyncMAMOnlyTitle": "Tillåt kalendersynkronisering",
+ "nativeCalendarSyncMAMOnlyTooltip": "Som standard möjliggör en appskyddsprincip kalendersynkronisering till den inbyggda appen Kalender, men kan användas för att blockera tillgängligheten för kalendersynkronisering. Inställningen fungerar oberoende av appskyddsprincipinställningen och gör det möjligt för organisationer att ange huruvida kalendersynkronisering ska vara tillgängligt för arbets- eller skolkontot.",
+ "nativeCalendarSyncTitle": "Synkronisera kalendrar",
+ "nativeCalendarSyncTooltip": "Som standard tillåter en appskyddsprincip kalendersynkronisering till den interna kalenderappen, men kan användas för att blockera tillgängligheten för kalendersynkronisering med inställningen \"Synkronisera principhanterade appdata med inbyggda appar eller tillägg\". Om du konfigurerar den här inställningen till \"Av\" blockeras kalendersynkronisering när inställningen appskyddsprincip är inställd på Tillåten.",
+ "playMyEmailsTitle": "Spela upp mina e-postmeddelanden",
+ "playMyEmailsTooltip": "Funktionen Spela upp mina e-postmeddelanden är inte aktiverad som standard i appen men visas för behöriga användare via en banderoll i inkorgen. När funktionen är inställd på Av, visas den inte för behöriga användare i appen. Användarna kan manuellt aktivera Spela upp mina e-postmeddelanden inifrån appen även när funktionen är Av. När den är inställd på Inte konfigurerat är standardappinställningen På och funktionen visas för behöriga användare.",
+ "signAllEmails": "Signera alla mejl",
+ "signAllEmailsAllowUserChangeTooltip": "Ange om användaren får ändra inställningen Signera alla mejl.",
+ "signAllEmailsTooltip": "Ange om alla mejl måste signeras. En digital signatur verifierar ett mejls autenticitet och säkerställer att innehållet inte har ändrats under överföringen.",
+ "syncAddressTitle": "Adress",
+ "syncAddressTooltip": "Värdet anger om kontaktens adress ska synkroniseras med interna kontakter.",
+ "syncBirthdayTitle": "Födelsedag",
+ "syncBirthdayTooltip": "Värdet anger om kontaktens födelsedag ska synkroniseras med interna kontakter.",
+ "syncCompanyTitle": "Företag",
+ "syncCompanyTooltip": "Värdet anger om kontaktens företagsnamn ska synkroniseras med interna kontakter.",
+ "syncDepartmentTitle": "Avdelning",
+ "syncDepartmentTooltip": "Värdet anger om kontaktens avdelning ska synkroniseras med interna kontakter.",
+ "syncEmailAddressTitle": "E-postadress",
+ "syncEmailAddressTooltip": "Värdet anger om kontaktens e-postadress ska synkroniseras med interna kontakter.",
+ "syncInstantMessagingAddressTitle": "Snabbmeddelandeadress",
+ "syncInstantMessagingAddressTooltip": "Värdet anger om kontaktens snabbmeddelandeadress ska synkroniseras med interna kontakter.",
+ "syncJobTitleTitle": "Befattning",
+ "syncJobTitleTooltip": "Värdet anger om kontaktens befattning ska synkroniseras med interna kontakter.",
+ "syncNicknameTitle": "Smeknamn",
+ "syncNicknameTooltip": "Värdet anger om kontaktens smeknamn ska synkroniseras med interna kontakter.",
+ "syncNotesTitle": "Anteckningar",
+ "syncNotesTooltip": "Värdet anger om kontaktens anteckningar ska synkroniseras med interna kontakter.",
+ "syncPhoneHomeFaxNumberTitle": "Hemfaxnummer",
+ "syncPhoneHomeFaxNumberTooltip": "Värdet anger om kontaktens hemfaxnummer ska synkroniseras med interna kontakter.",
+ "syncPhoneHomeNumberTitle": "Hemtelefonnummer",
+ "syncPhoneHomeNumberTooltip": "Värdet anger om kontaktens hemtelefonnummer ska synkroniseras med interna kontakter.",
+ "syncPhoneMobileNumberTitle": "Mobiltelefonnummer",
+ "syncPhoneMobileNumberTooltip": "Värdet anger om kontaktens mobiltelefonnummer ska synkroniseras med interna kontakter.",
+ "syncPhoneOtherNumberTitle": "Annat telefonnummer",
+ "syncPhoneOtherNumberTooltip": "Värdet anger om kontaktens andra telefonnummer ska synkroniseras med interna kontakter.",
+ "syncPhonePagerNumberTitle": "Personsökarnummer",
+ "syncPhonePagerNumberTooltip": "Värdet anger om kontaktens personsökarnummer ska synkroniseras med interna kontakter.",
+ "syncPhoneWorkFaxNumberTitle": "Arbetsfaxnummer",
+ "syncPhoneWorkFaxNumberTooltip": "Värdet anger om kontaktens arbetsfaxnummer ska synkroniseras med interna kontakter.",
+ "syncPhoneWorkNumberTitle": "Arbetstelefonnummer",
+ "syncPhoneWorkNumberTooltip": "Värdet anger om arbetstelefonnumret ska synkroniseras med interna kontakter.",
+ "syncPrefixTitle": "Namnprefix",
+ "syncPrefixTooltip": "Värdet anger om kontaktens namnprefix ska synkroniseras med interna kontakter.",
+ "syncSuffixTitle": "Namnsuffix",
+ "syncSuffixTooltip": "Värdet anger om kontaktens namnsuffix ska synkroniseras med interna kontakter.",
+ "textPredictionsTitle": "Textförutsägelse",
+ "textPredictionsTooltip": "Outlook kan föreslå ord och fraser medan du skriver meddelanden. Svep för att godkänna ett förslag från Outlook. När alternativet inte är konfigurerat är standardappinställningen På.",
+ "themesEnabledTitle": "Aktiverade teman",
+ "themesEnabledTooltip": "Ange om användaren får använda ett anpassat visuellt tema."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Använd de här inställningarna för att få information om vilka användare som installerar appar som inte är godkända för användning i företaget. Välj typ av lista över begränsade appar:
\r\n Förbjudna appar – en lista över appar som du vill bli informerad om när användare installerar. \r\n Godkända appar – en lista över appar som är godkända för användning i företaget. Du informeras när användare installerar en app som inte finns med på listan. \r\n ",
+ "androidZebraMxZebraMx": "Konfigurera Zebra-enheter genom att ladda upp en MX-profil i XML-format.",
+ "iosDeviceFeaturesAirprint": "Använd de här inställningarna för att ställa in iOS-enheter på att automatiskt ansluta till AirPrint-kompatibla skrivare i nätverket. Du behöver IP-adress och resurssökväg till dina skrivare.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Ställ in ett apptillägg som aktiverar enkel inloggning för enheter som kör iOS 13.0 eller senare.",
+ "iosDeviceFeaturesHomeScreenLayout": "Ställ in layouten för Dock och hemskärmar på iOS-enheter. Vissa enheter kan ha begränsningar för hur många objekt som får visas.",
+ "iosDeviceFeaturesIOSWallpaper": "Visa en bild som ska synas på hemskärmen och/eller låsskärmen på iOS-enheter.\r\n Om du vill visa en unik bild på varje plats skapar du en profil med låsskärmsbilden och en med hemskärmsbilden.\r\n Tilldela sedan användarna båda profilerna.\r\n \r\n
\r\n
Maximal filstorlek: 750 kB
\r\n
Filtyp: PNG, JPG eller JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Ange aviseringsinställningar för appar. Har stöd för iOS 9.3 och senare.",
+ "iosDeviceFeaturesSharedDevice": "Ange valfri text som ska visas på den låsta skärmen. Det här stöds på iOS 9.3 och senare. Läs mer",
+ "iosGeneralApplicationRestrictions": "Använd de här inställningarna för att få information om vilka användare som installerar appar som inte är godkända för användning i företaget. Välj typ av lista över begränsade appar:
\r\n Förbjudna appar – en lista över appar som du vill bli informerad om när användare installerar. \r\n Godkända appar – en lista över appar som är godkända för användning i företaget. Du informeras när användare installerar en app som inte finns med på listan. \r\n ",
+ "iosGeneralApplicationVisibility": "Använd listan med visade appar för att ange de iOS-appar som användaren kan visa eller starta. Använd listan med dolda appar för att ange de iOS-appar som användaren inte får visa eller starta.",
+ "iosGeneralAutonomousSingleAppMode": "Appar som du lägger till i listan och kopplar till en enhet kan låsa enheten så att bara den appen körs efter start, eller låsa enheten medan en viss åtgärd pågår (till exempel när du gör ett prov). När åtgärden har slutförts, eller om du tar bort begränsningen, återgår enheten till normalläget.",
+ "iosGeneralKiosk": "I kioskläget låses olika inställningar på en enhet eller också anges det att bara en viss app kan köras på en enhet. Det kan vara praktiskt i butiksmiljöer där du vill att bara en viss demoapp ska köras på enheten.",
+ "macDeviceFeaturesAirprint": "Använd de här inställningarna för att ställa in macOS-enheter på att automatiskt ansluta till AirPrint-kompatibla skrivare i nätverket. Du behöver IP-adress och resurssökväg till dina skrivare.",
+ "macDeviceFeaturesAssociatedDomains": "Konfigurera tillhörande domäner för delning av data och inloggningsuppgifter mellan organisationens appar och webbplatser. Den här profilen kan tillämpas på enheter som kör macOS 10.15 eller senare.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Ställ in ett apptillägg som aktiverar enkel inloggning för enheter som kör macOS 10.15 eller senare.",
+ "macDeviceFeaturesLoginItems": "Välj vilka appar, filer och mappar som ska öppnas när användarna loggar in på sina enheter. Om du inte vill att användarna ska kunna ändra hur valda appar ska öppnas, kan du dölja appen från användarkonfigurationen.",
+ "macDeviceFeaturesLoginWindow": "Ställ in hur macOS-inloggningsskärmen ska se ut och vilka funktioner som ska visas för användarna innan och efter de loggar in.",
+ "macExtensionsKernelExtensions": "Använd de här inställningarna för att ange en princip för kerneltillägg på macOS-enheter som kör 10.13.2 eller senare.",
+ "macGeneralDomains": "E-postmeddelanden som användaren skickar eller tar emot och som inte matchar de domäner du anger här, markeras som icke tillförlitliga.",
+ "windows10EndpointProtectionApplicationGuard": "När du använder Microsoft Edge skyddar Microsoft Defender Application Guard din miljö mot webbplatser som din organisation inte har definierat som tillförlitliga. När användare besöker webbplatser som inte är med på listan för ditt isolerade nätverk, öppnas webbplatserna i en virtuell webbläsarsession i Hyper-V. Tillförlitliga webbplatser definieras av en nätverksgräns som kan ställas in i Enhetskonfiguration. Observera att den här funktionen endast är tillgänglig för enheter som kör 64-bitars Windows 10 eller senare.",
+ "windows10EndpointProtectionCredentialGuard": "Om du aktiverar Credential Guard aktiveras följande obligatoriska inställningar:\r\n \r\n
\r\n
Aktivera virtualiseringsbaserad säkerhet: Virtualiseringsbaserad säkerhet (VBS) aktiveras vid nästa omstart. För virtualiseringsbaserad säkerhet används Windows Hypervisor för att ge stöd för säkerhetstjänster.
\r\n \r\n
Säker start med direkt minnesåtkomst: VBS aktiveras med säker start och direkt minnesåtkomst (DMA).
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Välj ytterligare appar som antingen måste granskas av eller som är betrodda att köras av Microsoft Defender Application Control. Windows-komponenter och alla appar från Windows Store är automatiskt betrodda att köras.
\r\n Program blockeras inte när de körs i läget Endast granskning. I läget Endast granskning, loggas alla händelser i lokala klientloggar.\r\n ",
+ "windows10GeneralPrivacyPerApp": "Lägg till appar som ska ha en annan sekretesspolicy än den du definierade i Standardsekretess.",
+ "windows10NetworkBoundaryNetworkBoundary": "Nätverksgränsen är en lista över företagsresurser, till exempel molnbaserade domäner och IP-adressintervall för datorer i företagsnätverket. Ange nätverksgränser för att tillämpa principer som skyddar data på de här platserna.",
+ "windowsHealthMonitoring": "Ställ in hälsoövervakningsprincipen i Windows.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone kan blockera användare från att installera eller starta appar som står med i listan över otillåtna appar eller appar som inte står med i listan över godkända appar. Alla hanterade appar måste läggas till i listan över godkända appar."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Misslyckas bara med valda blockeringsappar i teknikfasen",
+ "apps": "appar",
+ "appsListName": "Programlista",
+ "blockingApps": "Blockera appar",
+ "managedApps": "Hanterade appar",
+ "noApps": "Inga program",
+ "noAppsError": "Fel när program hämtades",
+ "selectApps": "Välj appar",
+ "selectedAppsCount": "{0} appar har valts (max 100)",
+ "useSelectedAppsAll": "Alla",
+ "useSelectedAppsSelected": "Markerat",
+ "useSelectedAppsToggleLabel": "Blockera enheten tills de begärda apparna har installerats, om de är kopplade till användaren/enheten"
+ },
+ "Header": {
+ "application": "Program",
+ "publisher": "Utgivare",
+ "version": "Version"
+ },
+ "SearchBox": {
+ "ariaLabel": "Sök efter appar",
+ "placeHolder": "Sök efter namn eller utgivare"
+ },
+ "allowToUseToggle": "Tillåt användare att använda enheten om det uppstår fel under installationen",
+ "blockToggle": "Blockera användning av enheten tills alla appar och profiler har installerats",
+ "blockToolTip": "Om du till exempel lägger till Microsoft Word i den här listan kan riktade användare och enheter inte lämna sidan för registreringsstatus förrän Word har installerats.",
+ "collectLogToggle": "Aktivera sidan med logginsamling och diagnostik för slutanvändare",
+ "create": "Skapa profil",
+ "customMessageTextBox": "Felmeddelande",
+ "customMessageToggle": "Visa anpassat meddelande vid tidsgräns eller fel",
+ "enableForAutopilotOnlyToggle": "Visa bara sidan för enheter som har etablerats via välkomstprogrammet",
+ "installQualityUpdatesToggle": "Installera Windows-kvalitetsuppdateringar (kan starta om enheten) (förhandsversion)",
+ "progressToggle": "Visa inställningsförlopp för appar och profiler",
+ "resetToggle": "Tillåt användare att återställa enheten om det uppstår fel vid installationen",
+ "timeout": "Visa ett fel när installationen tar länge tid än angivet antal minuter"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Egenskap ",
+ "rule": "Regel",
+ "ruleDetails": "Regelinformation",
+ "value": "Värde"
+ },
+ "assignIf": "Tilldela profil om",
+ "deleteWarning": "Den valda tillämplighetsregeln tas bort",
+ "dontAssignIf": "Tilldela inte profil om",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "och {0} till",
+ "instructions": "Ange hur den här profilen ska tillämpas i en tilldelad grupp. Profilen tillämpas endast på enheter som uppfyller de kombinerade villkoren för reglerna i Intune.",
+ "maxText": "Max",
+ "minText": "Min",
+ "noActionRow": "Inga tillämplighetsregler har angetts",
+ "oSVersion": "t.ex. 1.2.3.4",
+ "toText": "till",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home – enkelt språk",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "Operativsystemutgåva",
+ "windows10OsVersion": "Operativsystemsversion",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professionell Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Tillåt användaren att ändra inställning",
+ "tooltip": "Ange om användaren får ändra inställningen."
+ },
+ "AllowWorkAccounts": {
+ "title": "Tillåt endast arbets- eller skolkonton",
+ "tooltip": " När den här inställningen är aktiverad kan användarna inte lägga till privata mejl och lagringskonton i Outlook. En användare som har ett lagt till ett privat konto i Outlook ombeds att ta bort det privata kontot. Om användaren inte tar bort det privata kontot går det inte att lägga till arbets- eller skolkontot."
+ },
+ "BlockExternalImages": {
+ "title": "Blockera externa bilder",
+ "tooltip": "När Blockera externa bilder är aktiverat går det inte att ladda ned bilder från Internet som är inbäddade i meddelandetexten. När alternativet inte är konfigurerat är standardappinställningen Av"
+ },
+ "ConfigureEmail": {
+ "title": "Ställ in e-postkontoinställningar"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Standardsignatur för app visar om appen ska använda Skaffa Outlook för Android som standardsignatur när meddelanden skrivs. Om inställningen är Av, används ingen standardsignatur utan användarna kan lägga till egna signaturer.\r\n\r\nNär alternativet inte är konfigurerat är standardappinställningen På.",
+ "iOS": "Standardsignatur för app visar om appen ska använda Skaffa Outlook för iOS som standardsignatur när meddelanden skrivs. Om inställningen är Av, används ingen standardsignatur utan användarna kan lägga till egna signaturer.\r\n\r\nNär alternativet inte är konfigurerat är standardappinställningen På."
+ },
+ "title": "Standardsignatur för app"
+ },
+ "OfficeFeedReplies": {
+ "title": "Identifieringsflöde",
+ "tooltip": "Identifieringsflödet täcker de Office-filer du använder mest. Det här flödet aktiveras automatiskt när Delve har aktiverats för användaren. När alternativet inte är konfigurerat är standardappinställningen På."
+ },
+ "OrganizeMailByThread": {
+ "title": "Sortera e-post efter tråd",
+ "tooltip": "Standardfunktionssättet i Outlook är att slå ihop mejlkonversationer till en trådad konversationsvy. Om inställningen är inaktiverad visas varje mejl enskilt i Outlook och grupperas inte efter tråd."
+ },
+ "PlayMyEmails": {
+ "title": "Spela upp mina e-postmeddelanden",
+ "tooltip": "Funktionen Spela upp mina e-postmeddelanden är inte aktiverad som standard i appen men visas för behöriga användare via en banderoll i inkorgen. När funktionen är inställd på Av, visas den inte för behöriga användare i appen. Användarna kan manuellt aktivera Spela upp mina e-postmeddelanden inifrån appen även när funktionen är Av. När den är inställd på Inte konfigurerat är standardappinställningen På och funktionen visas för behöriga användare."
+ },
+ "SuggestedReplies": {
+ "title": "Föreslagna svar",
+ "tooltip": "När du öppnar ett meddelande kan du få svarsförslag från Office under meddelandet. Om du markerar ett förslag på svar kan du redigera det innan du skickar det."
+ },
+ "SyncCalendars": {
+ "title": "Synkronisera kalendrar",
+ "tooltip": "Ställ in om användarna ska kunna synkronisera Outlook-kalendern med den inbyggda kalenderappen och databasen."
+ },
+ "TextPredictions": {
+ "title": "Textförutsägelse",
+ "tooltip": "Outlook kan föreslå ord och fraser medan du skriver meddelanden. Svep för att godkänna ett förslag från Outlook. När alternativet inte är konfigurerat är standardappinställningen På."
+ },
+ "ThemesEnabled": {
+ "title": "Aktiverade teman",
+ "tooltip": "Ange om användaren får använda ett anpassat visuellt tema."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS-enheter"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Administratörskontakter",
+ "appPackaging": "Appaket",
+ "autopatchGroups": "Autokorrigeringsgrupper",
+ "devices": "Enheter",
+ "featureEnablement": "Funktionsaktivering",
+ "feedback": "Feedback",
+ "gettingStarted": "Komma igång",
+ "messages": "Meddelanden",
+ "onlineResources": "Onlineresurser",
+ "policyHealth": "Principhälsa",
+ "policyHealthPreview": "Principhälsa (förhandsversion)",
+ "releaseManagement": "Versionshantering",
+ "serviceRequests": "Tjänstförfrågningar",
+ "settings": "Inställningar",
+ "supportRequests": "Supportärenden",
+ "tenantEnrollment": "Klientorganisationsregistrering",
+ "tenantManagement": "Klientorganisationshantering"
+ },
+ "actions": "Åtgärder vid inkompatibilitet",
+ "advancedExchangeSettings": "Exchange Online-inställningar",
+ "advancedThreatProtection": "Microsoft Defender för Endpoint",
+ "allApps": "Alla appar",
+ "allDevices": "Alla enheter",
+ "androidFotaDeployments": "Android FOTA-distributioner",
+ "appBundles": "Appaket",
+ "appCategories": "Appkategorier",
+ "appConfigPolicies": "Appkonfigurationsprinciper",
+ "appConfigurationStatus": "Status för appkonfiguration",
+ "appInstallStatus": "Status för appinstallation",
+ "appLicences": "Applicenser",
+ "appProtectionPolicies": "Principer för appskydd",
+ "appProtectionStatus": "Status för appskydd",
+ "appSelectiveWipe": "Selektiv radering av app",
+ "appleVppTokens": "Apple VPP-token",
+ "apps": "Appar",
+ "assign": "Tilldelningar",
+ "assignedPermissions": "Tilldelade behörigheter",
+ "assignedRoles": "Tilldelade roller",
+ "autopilotDeploymentReport": "AutoPilot-distributioner (förhandsversion)",
+ "autopilotDeploymentReportV2": "Autopilot-distributioner 2.0 (förhandsversion)",
+ "brandingAndCustomization": "Anpassning",
+ "cartProfiles": "Kundvagnsprofiler",
+ "certificateConnectors": "Certifikatanslutningsprogram",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Molnanslutna enheter (förhandsversion)",
+ "cloudPcActions": "Åtgärder för molnbaserad dator (förhandsversion)",
+ "cloudPcMaintenanceWindows": "Underhållsperioder för molnbaserade datorer (förhandsversion)",
+ "compliancePolicies": "Kompatibilitetsprinciper",
+ "complianceScriptManagement": "Skript",
+ "complianceScriptManagementPreview": "Skript (förhandsversion)",
+ "complianceSettings": "Inställningar för efterlevnadsprinciper",
+ "conditionStatements": "Villkorssatser",
+ "conditions": "Platser",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Konfigurationsprofiler",
+ "configurationScripts": "Konfigurationsskript",
+ "connectorsAndTokens": "Anslutning och token",
+ "corporateDeviceIdentifiers": "ID:n för företagsenheter",
+ "customAttributes": "Anpassade attribut",
+ "customAttributesMacOS": "Anpassade attribut för macOS",
+ "customNotifications": "Anpassade meddelanden",
+ "deploymentSettings": "Distributionsinställningar",
+ "derivedCredentials": "Härledda autentiseringsuppgifter",
+ "deviceActions": "Enhetsåtgärder",
+ "deviceCategories": "Enhetskategorier",
+ "deviceCleanUp": "Regler för enhetsrensning",
+ "deviceEnrollmentManagers": "Enhetsregistreringshanterare",
+ "deviceExecutionStatus": "Enhetsstatus",
+ "deviceLimitEnrollmentRestrictions": "Gränser för enhetsregistrering",
+ "deviceTypeEnrollmentRestrictions": "Plattformsbegränsningar för enhetsregistrering",
+ "devices": "Enheter",
+ "discoveredApps": "Identifierade appar",
+ "edgePolicies": "Principer för Microsoft Edge",
+ "embeddedSIM": "eSIM-mobilprofiler (förhandsversion)",
+ "enrollDevices": "Registrera enheter",
+ "enrollmentFailures": "Registreringsfel",
+ "enrollmentNotifications": "Registreringsmeddelanden (förhandsversion)",
+ "enrollmentRestrictions": "Registreringsbegränsningar",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange-tjänstekopplingar",
+ "failuresForCumulativeQualityUpdates": "Fel vid kumulativ kvalitetsuppdatering i Windows",
+ "failuresForDriverUpdates": "Drivrutinsuppdateringsfel i Windows",
+ "failuresForFeatureUpdates": "Fel vid funktionsuppdatering",
+ "failuresForQualityUpdates": "Snabbuppdateringsfel i Windows",
+ "featureFlighting": "Förhandsversionstestning av funktioner",
+ "featureUpdateDeployments": "Funktionsuppdateringar för Windows 10 och senare",
+ "flighting": "Förhandsversionstestning",
+ "fotaUpdate": "OTA-uppdatering (Over The Air) av inbyggd programvara",
+ "groupPolicy": "Administrativa mallar",
+ "groupPolicyAnalytics": "Grupprincipanalys",
+ "helpSupport": "Hjälp och support",
+ "helpSupportReplacement": "Hjälp och support ({0})",
+ "iOSAppProvisioning": "Etableringsprofiler för iOS-app",
+ "incompleteUserEnrollments": "Ofullständiga användarregistreringar",
+ "iosUpdates": "iOS-/iPadOS-uppdateringar",
+ "legacyPcManagement": "Hantering av äldre datorer",
+ "macOSSoftwareUpdate": "macOS-uppdateringar",
+ "macOSSoftwareUpdateAccountSummaries": "Installationsstatus för macOS-enheter",
+ "macOSSoftwareUpdateCategorySummaries": "Sammanfattning av programuppdateringar",
+ "macOSSoftwareUpdateStateSummaries": "uppdateringar",
+ "managedGooglePlay": "Hanterat Google Play-konto",
+ "msfb": "Microsoft Store för företag",
+ "myPermissions": "Mina behörigheter",
+ "notifications": "Aviseringar",
+ "officeApps": "Office-appar",
+ "officeProPlusPolicies": "Principer för Office-appar",
+ "onPremise": "Lokalt",
+ "onPremisesConnector": "Exchange ActiveSync On-Premises Connector",
+ "onPremisesDeviceAccess": "Exchange ActiveSync-enheter",
+ "onPremisesManageAccess": "Åtkomst till Exchange lokalt",
+ "outOfDateIosDevices": "Installationsfel för iOS-enheter",
+ "overview": "Översikt",
+ "partnerDeviceManagement": "Enhetshantering för partner",
+ "perUpdateRingDeploymentState": "Per distributionsstatus för uppdateringsring",
+ "permissions": "Behörigheter",
+ "platformApps": "{0} appar",
+ "platformDevices": "{0} enheter",
+ "platformEnrollment": "{0} registrering",
+ "policies": "Principer",
+ "profiles": "Profiler",
+ "properties": "Egenskaper",
+ "reports": "Rapporter",
+ "retireNoncompliantDevices": "Dra tillbaka icke-kompatibla enheter",
+ "retireNoncompliantDevicesPreview": "Dra tillbaka icke-kompatibla enheter (förhandsversion)",
+ "role": "Roll",
+ "scriptManagement": "Skript",
+ "securityBaselines": "Säkerhetsbaslinjer",
+ "serviceToServiceConnector": "Exchange Online Connector",
+ "servicenowConnector": "ServiceNow-anslutningsprogram",
+ "shellScripts": "Shell-skript",
+ "teamViewerConnector": "TeamViewer-anslutningsprogram",
+ "telecomeExpenseManagement": "Kostnadsuppföljning av telekommunikation",
+ "tenantAdmin": "Klientorganisationsadministratör",
+ "tenantAdministration": "Administration av klientorganisation",
+ "termsAndConditions": "Villkor",
+ "titles": "Rubriker",
+ "troubleshoot": "Felsökning",
+ "troubleshootSupport": "Felsökning + support",
+ "user": "Användare",
+ "userExecutionStatus": "Användarstatus",
+ "wdacSupplementalPolicies": "Tilläggsprinciper för S-läge",
+ "win32CatalogUpdateApp": "Uppdateringar för Enterprise App Management-appar",
+ "win32CatalogUpdateAppInPreview": "Uppdateringar för Windows-katalogappar (Win32) (förhandsversion)",
+ "win32CatalogUpdateAppPreviewTitle": "Katalogappar för företagsappar med uppdateringar (förhandsversion)",
+ "win32CatalogUpdateAppTitle": "Appar i för företagsappkatalogen med uppdateringar",
+ "windows10DriverUpdate": "Drivrutinsuppdateringar för Windows 10 och senare",
+ "windows10QualityUpdate": "Kvalitetsuppdateringar för Windows 10 och senare",
+ "windows10UpdateRings": "Uppdateringringar för Windows 10 och senare",
+ "windows10XPolicyFailures": "Windows 10X-principfel",
+ "windows365PartnerConnector": "Windows 365 partnerkopplingar",
+ "windowsDiagnosticData": "Windows-data",
+ "windowsEnterpriseCertificate": "Windows Enterprise-certifikat",
+ "windowsManagement": "Skript",
+ "windowsSideLoadingKeys": "Nycklar för separat inläsning i Windows",
+ "windowsSymantecCertificate": "Windows DigiCert-certifikat",
+ "windowsThreatReport": "Agentstatus för hot"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Tillåt användare att öppna data från valda tjänster",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Välj antal tidigare PIN-koder som ska behållas"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "En blockeringsåtgärd krävs för alla principer för efterlevnad.",
- "graceperiod": "Schema (dagar av icke-kompatibilitet)",
- "graceperiodInfo": "Ange efter hur många dagars icke-kompatibilitet den här åtgärden ska aktiveras på användarens enhet",
- "subtitle": "Ange åtgärdsparametrar",
- "title": "Åtgärdsparametrar"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Gör tillgänglig för användare som en valfri uppdatering",
+ "optionalValue": "Valfritt",
+ "required": "Gör tillgänglig för användare som en obligatorisk uppdatering",
+ "requiredValue": "Obligatoriskt"
},
- "List": {
- "gracePeriodDay": "{0} dag av icke-kompatibilitet",
- "gracePeriodDays": "{0} dagar av icke-kompatibilitet",
- "gracePeriodHour": "{0} timme av icke-kompatibilitet",
- "gracePeriodHours": "{0} timmar av icke-kompatibilitet",
- "gracePeriodMinute": "{0} minut av icke-kompatibilitet",
- "gracePeriodMinutes": "{0} minuter av icke-kompatibilitet",
- "immediately": "Omedelbart",
- "schedule": "Schema",
- "scheduleInfoBalloon": "Dagar efter inkompatibilitet",
- "subtitle": "Ange följden av åtgärder på icke-kompatibla enheter",
- "title": "Åtgärder"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise-systemapp",
+ "androidForWorkApp": "App från hanterad Google Play-butik",
+ "androidLobApp": "Branschspecifik Android-app",
+ "androidStoreApp": "Google Play-app",
+ "builtInAndroid": "Inbyggd Android-app",
+ "builtInApp": "Inbyggd app",
+ "builtInIos": "Inbyggd iOS-app",
+ "default": "",
+ "iosIPadOSWebClip": "Webbklipp för iOS/iPadOS",
+ "iosLobApp": "Branschspecifik iOS-app",
+ "iosStoreApp": "iOS Store-app",
+ "iosVppApp": "Volyminköpsprogramapp för iOS",
+ "lineOfBusinessApp": "Branschspecifik app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "Verksamhetsspecifik macOS-app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365-appar (macOS)",
+ "macOSPkgApp": "macOS-app (PKG)",
+ "macOSWebClip": "macOS-webbklipp",
+ "macOsVppApp": "Volyminköpsprogramapp för macOS",
+ "managedAndroidLobApp": "Hanterad branschspecifik Android-app",
+ "managedAndroidStoreApp": "Hanterad Google Play-app",
+ "managedGooglePlayApp": "App från hanterad Google Play-butik",
+ "managedGooglePlayPrivateApp": "Privat app från hanterad Google Play-butik",
+ "managedGooglePlayWebApp": "Hanterad Google Play-webblänk",
+ "managedIosLobApp": "Hanterad branschspecifik iOS-app",
+ "managedIosStoreApp": "Hanterad iOS Store-app",
+ "microsoftStoreForBusinessApp": "Microsoft Store för företag-app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store för företag",
+ "officeSuiteApp": "Microsoft 365-applikationer (Windows 10 och senare)",
+ "webApp": "Webblänk",
+ "windowsAppXLobApp": "Branschspecifik Windows AppX-app",
+ "windowsClassicApp": "Windows-app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 och senare)",
+ "windowsMobileMsiLobApp": "Branschspecifik Windows MSI-app",
+ "windowsPhone81AppXBundleLobApp": "Branschspecifik Windows Phone 8.1 AppX-app",
+ "windowsPhone81AppXLobApp": "Branschspecifik Windows Phone 8.1 AppX-app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 Store-app",
+ "windowsPhoneXapLobApp": "Branschspecifik Windows Phone XAP-app",
+ "windowsStoreApp": "Microsoft Store app (äldre)",
+ "windowsUniversalAppXLobApp": "Branschspecifik Windows Universal AppX-app",
+ "windowsUniversalLobApp": "Branschspecifik universell Windows-app",
+ "windowsWebApp": "Windows-webblänk"
+ },
+ "PolicySet": {
+ "appManagement": "Programhantering",
+ "assignments": "Tilldelningar",
+ "basics": "Grundläggande inställningar",
+ "deviceEnrollment": "Enhetsregistrering",
+ "deviceManagement": "Enhetshantering",
+ "scopeTags": "Omfångstaggar",
+ "appConfigurationTitle": "Appkonfigurationsprinciper",
+ "appProtectionTitle": "Principer för appskydd",
+ "appTitle": "Appar",
+ "iOSAppProvisioningTitle": "Etableringsprofiler för iOS-app",
+ "deviceLimitRestrictionTitle": "Begränsningar för antal enheter",
+ "deviceTypeRestrictionTitle": "Begränsningar av enhetstyp",
+ "enrollmentStatusSettingTitle": "Registreringsstatussidor",
+ "windowsAutopilotDeploymentProfileTitle": "Windows Autopilot-distributionsprofiler",
+ "deviceComplianceTitle": "Efterlevnadsprinciper för enhet",
+ "deviceConfigurationTitle": "Profiler för enhetskonfigurationer",
+ "powershellScriptTitle": "PowerShell-skript"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Appinstallation kan tvinga fram omstart av enhet",
+ "basedOnReturnCode": "Bestäm beteende baserat på returkoder",
+ "force": "Intune tvingar fram obligatorisk omstart av enhet",
+ "suppress": "Ingen specifik åtgärd"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Installationstid som krävs (minuter)",
+ "maxRunTimeInMinutesToolTip": "Antalet minuter som systemet väntar på att installationsprogrammet ska slutföras. Standardvärdet är 60 minuter."
+ },
+ "RunAsAccountOptions": {
+ "system": "System",
+ "user": "Användare"
+ },
+ "availableUninstall": "Tillåt tillgänglig avinstallation",
+ "availableUninstallTooltip": "Välj Ja om du vill ange avinstallationsalternativet för den här appen för användare från Företagsportal. Välj Nej om du vill hindra användarna från att avinstallera appen från Företagsportal.",
+ "bladeTitle": "Program",
+ "deviceRestartBehavior": "Beteende för enhetsomstart",
+ "deviceRestartBehaviorTooltip": "Välj funktionssätt för omstart av enheten när appen har installerats. Välj Bestäm beteende baserat på returkoder, om du vill starta om enheten utifrån inställningarna för returkoder. Välj Ingen särskild åtgärd om du inte vill att enheten ska startas om när MSI-baserade appar installeras. Välj Appinstallation kan tvinga fram omstart av enhet, om du vill att appinstallationen ska slutföras utan att åsidosätta omstart. Välj Intune tvingar fram obligatorisk omstart av enhet, om enheten alltid ska starta om efter en lyckad appinstallation.",
+ "header": "Ange kommandon för att installera och avinstallera appen:",
+ "installCommand": "Installationskommando",
+ "installCommandMaxLengthErrorMessage": "Installationskommandot får inte överskrida maxlängden på 1 024 tecken.",
+ "installCommandTooltip": "Den fullständiga installationskommandoraden som används för att installera appen.",
+ "runAs32Bit": "Kör installationsprogrammet och avinstallera kommandon i en 32-bitarsprocess på 64-bitarsklienter",
+ "runAs32BitTooltip": "Välj Ja om du vill installera och avinstallera appen i en 32-bitarsprocess på 64-bitarsklienter. Välj Nej (standard) om du vill installera och avinstallera appen i en 64-bitarsprocess på 64-bitarsklienter. 32-bitarsklienter använder alltid en 32-bitarsprocess.",
+ "runAsAccount": "Installationsbeteende",
+ "runAsAccountTooltip": "Välj System om du vill installera appen för alla användare, om stöds finns. Välj Användare om du vill installera appen för den inloggade användaren på enheten. Om du har MSI-appar för flera syften kommer ändringar att hindra uppdateringar och avinstallationer från att slutföras tills det värde som tillämpades på enheten vid den ursprungliga installationen har återställts.",
+ "selectorLabel": "Program",
+ "uninstallCommand": "Avinstallationskommando",
+ "uninstallCommandTooltip": "Den fullständiga avinstallationskommandoraden som används för att avinstallera appen."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Övrigt",
- "additionalRecipients": "Ytterligare mottagare (via e-post)",
- "additionalRecipientsBladeTitle": "Välj ytterligare mottagare",
- "emailAddressPrompt": "Ange e-postadresser (kommateckenåtskilda)",
- "invalidEmail": "Ogiltig e-postadress",
- "messageTemplate": "Meddelandemall",
- "noneSelected": "Inga valda",
- "notSelected": "Inte valt",
- "numSelected": "{0} har valts",
- "selected": "Valda"
- },
- "block": "Markera enheten som inkompatibel",
- "lockDevice": "Lås enhet (lokal åtgärd)",
- "lockDeviceWithPasscode": "Lås enhet (lokal åtgärd)",
- "noAction": "Ingen åtgärd",
- "noActionRow": "Inga åtgärder, välj Lägg till för att lägga till en åtgärd",
- "pushNotification": "Skicka push-meddelande till slutanvändare",
- "remoteLock": "Fjärrlås en inkompatibel enhet",
- "removeSourceAccessProfile": "Ta bort profil för källåtkomst",
- "retire": "Lägg till enhet i listan över borttagningar",
- "wipe": "Rensa",
- "emailNotification": "Skicka e-post till slutanvändare"
- },
- "InstallIntent": {
- "available": "Tillgängligt för registrerade enheter",
- "availableWithoutEnrollment": "Tillgänglig med eller utan registrering",
- "required": "Obligatoriskt",
- "uninstall": "Avinstallera"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Skapa anpassat skript",
- "edit": "Redigera anpassat skript"
- },
- "basicInfo": "Skapa ett nytt anpassat skriptpaket av de identifierings- och reparationsskript du har skrivit.",
- "customScriptCapitalized": "Anpassat skript",
- "customScriptLowercase": "anpassat skript",
- "detectionScript": "Identifieringsskript"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Tillåt användning av gemener i PIN-kod",
+ "notAllow": "Tillåt inte användning av gemener i PIN-kod",
+ "requireAtLeastOne": "Kräv att minst en gemen bokstav används i PIN-kod"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Tillåt användning av specialtecken i PIN-kod",
+ "notAllow": "Tillåt inte användning av specialtecken i PIN-kod",
+ "requireAtLeastOne": "Kräv att minst ett specialtecken används i PIN-kod"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Tillåt användning av versaler i PIN-kod",
+ "notAllow": "Tillåt inte användning av versaler i PIN-kod",
+ "requireAtLeastOne": "Kräv att minst en versal bokstav används i PIN-kod"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Skapa ny",
+ "createNewResourceAccountInfo": "
\r\nSkapa ett nytt resurskonto under registreringen. Resurskontot läggs till i resurskontotabellen direkt men aktiveras inte förrän enheten registreras och Surface Hub-prenumerationen har kontrollerats. Läs mer om resurskonton
\r\n ",
+ "createNewResourceTitle": "Skapa nytt resurskonto",
+ "deviceNameInvalid": "Enhetsnamnets format är felaktigt",
+ "deviceNameRequired": "Ett enhetsnamn måste anges",
+ "editResourceAccountLabel": "Redigera",
+ "selectExistingCommandMenu": "Välj befintligt"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "Namnen får innehålla högst 15 tecken och får innehålla bokstäver (a–ö, A–Ö), siffror (0–9) samt bindestreck. Namnen får inte bara bestå av siffror. Namnen får inte innehålla blanksteg."
+ },
+ "Header": {
+ "addressableUserName": "Eget namn för användare",
+ "azureADDevice": "Tillhörande Microsoft Entra-enhet",
+ "batch": "Grupptagg",
+ "dateAssigned": "Tilldelat datum",
+ "deviceAccountPwd": "Tjänstkontolösenord",
+ "deviceAccountUpn": "Enhetskonto",
+ "deviceDisplayName": "Enhetsnamn",
+ "deviceFriendlyName": "Eget namn på enhet",
+ "deviceName": "Enhetsnamn",
+ "deviceUseType": "Typ av enhetsanvändning",
+ "enrollmentState": "Registreringsstatus",
+ "intuneDevice": "Tillhörande Intune-enhet",
+ "lastContacted": "Senast kontaktad",
+ "make": "Tillverkare",
+ "model": "Modell",
+ "profile": "Tilldelad profil",
+ "profileStatus": "Profilstatus",
+ "purchaseOrderId": "Inköpsorder",
+ "resourceAccount": "Resurskonto",
+ "serialNumber": "Serienummer",
+ "userPrincipalName": "Användare"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Ett eget namn krävs",
+ "pwdRequired": "Ett lösenord måste anges.",
+ "pwdValidFormat": "Det gick inte att uppdatera lösenordet. Värdet för det nya lösenordet uppfyller inte domänens krav på längd eller komplexitet.",
+ "upnRequired": "Ett enhetskonto krävs",
+ "upnValidFormat": "Värden kan innehålla bokstäver (a-z, A-Z), siffror (0-9) och bindestreck. Värden får inte innehålla blanksteg."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Möten och presentation",
+ "teamCollaboration": "Gruppsamarbete"
+ },
+ "Devices": {
+ "featureDescription": "Med Windows Autopilot kan du anpassa hela välkomstupplevelsen för användarna.",
+ "importErrorStatus": "Vissa enheter importerades inte. Klicka här om du vill ha mer information.",
+ "importPendingStatus": "Import pågår. Tid som förflutit: {0} min. Processen kan ta upp till {1} min."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Microsoft Entra-hybridanslutning",
+ "activeDirectoryADLabel": "Microsoft Entra-hybridanslutning med Autopilot",
+ "azureAD": "Microsoft Entra-ansluten",
+ "unknownType": "Okänd typ"
+ },
+ "Filter": {
+ "enrollmentState": "Region",
+ "profile": "Profilstatus"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "Eget användarnamn måste anges."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Skapa en namngivningsmall för att lägga till namn på enheterna under registreringen.",
+ "label": "Använd mall för enhetsnamn"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "För Microsoft Entra-hybridanslutna typer av Autopilot-distributionsprofiler namnges enheterna med hjälp av inställningarna i domänanslutningskonfigurationen."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MyCompany-%RAND:4%",
+ "label": "Ange ett namn",
+ "noDisallowedChars": "Namnet får bara innehålla alfanumeriska tecken, bindestreck, %SERIAL% eller %RAND:x%",
+ "serialLength": "Det går inte att använda fler än 7 tecken med %SERIAL%",
+ "validateLessThan15Chars": "Namnet får innehålla högst 15 tecken",
+ "validateNoSpaces": "Datornamn får inte innehålla mellanslag",
+ "validateNotAllNumbers": "Namnet måste även innehålla bokstäver och/eller bindestreck",
+ "validateNotEmpty": "Namnet får inte vara tomt",
+ "validateOnlyOneMacro": "Namnet får bara innehålla ett av %SERIAL% eller %RAND:x%"
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Skapa ett unikt namn för dina enheter. Namnen får innehålla högst 15 tecken, och bokstäver (a–ö, A–Ö), siffror (0–9) och bindestreck. Namnen får inte bara bestå av siffror. Namnen får inte innehålla blanksteg. Använd makrot %SERIAL% om du vill lägga till ett serienummer för maskinvara. Du kan också använda makrot %RAND:x% om du vill lägga till en slumpmässig siffersträng där x är lika med antalet siffror som ska läggas till."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Aktivera möjligheten att trycka på Windows-tangenten 5 gånger för att köra välkomstprogrammet utan användarautentisering för att registrera enheten och installera alla systemappar och inställningar. Användarappar och inställningar levereras när användaren loggar in.",
+ "label": "Tillåt förallokerad distribution"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Autopilot Microsoft Entra-hybridanslutningsflödet fortsätter även om ingen domänkontrollantanslutning upprättas under välkomstprogrammet.",
+ "label": "Hoppa över AD-anslutningskontroll"
+ },
+ "accountType": "Användarkontotyp",
+ "accountTypeInfo": "Ange huruvida användarna ska vara administratörer eller standardanvändare på enheten. Tänk på att den här inställningen inte gäller globala administratörskonton eller företagsadministratörskonton. De här kontona kan inte vara standardanvändarkonton eftersom de har åtkomst till administrativa funktioner i Microsoft Entra ID.",
+ "configOOBEInfo": "
\r\nStäll in välkomstprogrammet för Autopilot-enheter\r\n
",
+ "configureDevice": "Distributionsläge",
+ "configureDeviceHintForSurfaceHub2": "Autopilot har bara stöd för självdistributionsläge för Surface Hub 2. I det läget kopplas inte användaren till den registrerade enheten så inga användarautentiseringsuppgifter krävs.",
+ "configureDeviceHintForWindowsPC": "
\r\n Distributionsläget avgör om en användare måste ange autentiseringsuppgifter för att etablera enheten.\r\n
\r\n
\r\n
\r\n Användarbaserat: Enheterna är kopplade till den användare som registrerar enheten och det krävs användarautentiseringsuppgifter för att etablera enheten\r\n
\r\n
\r\n Självdistribution (förhandsversion): Enheterna är inte kopplade till den användare som registrerar enheten och inga användarautentiseringsuppgifter krävs för att etablera enheten\r\n
\r\n
",
+ "createSurfaceHub2Info": "Ställ in Autopilot-registreringsinställningarna för dina Surface Hub 2-enheter. Som standard är det möjligt att hoppa över användarautentisering i Autopilot under välkomstprogrammet. Läs mer om Windows Autopilot för Surface Hub 2.",
+ "createWindowsPCInfo": "\r\n
\r\nFöljande alternativ aktiveras automatiskt för Autopilot-profiler i självdistributionsläge:\r\n
\r\n
\r\n
\r\n Hoppa över val av användning på arbete eller hemma\r\n
\r\n
\r\n Hoppa över OEM-registrering och OneDrive-konfiguration\r\n
\r\n
\r\n Hoppa över användarautentisering i välkomstupplevelsen\r\n
\r\n
",
+ "endUserDevice": "Användarbaserat",
+ "hideEscapeLink": "Dölj alternativ för att ändra konto",
+ "hideEscapeLinkInfo": "Alternativen för att ändra konto och börja om med ett annat konto visas på företagsinloggningssidan första gången enheten ställs in respektive på domänfelsidan. Om du vill dölja alternativen måste du ställa in företagsanpassning i Microsoft Entra ID (Windows 10, 1809 eller senare eller Windows 11 krävs).",
+ "info": "Inställningarna för AutoPilot-profilen avgör vilken välkomstupplevelse användarna får när de startar Windows för första gången. ",
+ "language": "Språk (region)",
+ "languageInfo": "Ange det språk och den region som ska användas.",
+ "licenseAgreement": "Licensvillkor för programvara från Microsoft",
+ "licenseAgreementInfo": "Ange om licensavtalet ska visas för användarna.",
+ "plugAndForgetDevice": "Självdistribution",
+ "privacySettingWarning": "Standardvärdet för diagnostikdatainsamlingen har ändrats för enheter som kör Windows 10, version 1903 och senare eller Windows 11. ",
+ "privacySettings": "Sekretessinställningar",
+ "privacySettingsInfo": "Ange om sekretessinställningar ska visas för användarna.",
+ "showCortanaConfigurationPage": "Cortana-konfiguration",
+ "showCortanaConfigurationPageInfo": "Med Visa aktiveras introduktionen till Cortana-konfiguration under starten.",
+ "skipEULAWarning": "Viktig information om att dölja licensvillkor",
+ "skipKeyboardSelection": "Konfigurera tangentbord automatiskt",
+ "skipKeyboardSelectionInfo": "Om värdet är true hoppar du över sidan med val av tangentbord om språk är inställt.",
+ "subtitle": "AutoPilot-profiler",
+ "title": "Välkomstupplevelse (OOBE)",
+ "useOSDefaultLanguage": "Standardoperativsystem",
+ "userSelect": "Användarval"
},
+ "Sync": {
+ "lastRequestedLabel": "Senaste synkroniseringsbegäran",
+ "lastSuccessfulLabel": "Senast slutförda synkronisering",
+ "syncInProgress": "Synkronisering pågår. Kom tillbaka snart.",
+ "syncInitiated": "Synkronisering av AutoPilot-inställningarna har initierats.",
+ "syncSettingsTitle": "Synkronisera AutoPilot-inställningar"
+ },
+ "Title": {
+ "devices": "Windows AutoPilot-enheter"
+ },
+ "Tooltips": {
+ "addressableUserName": "Hälsningsnamn som visas när enheten ställs in.",
+ "azureADDevice": "Gå till enhetsinformationen för tillhörande enhet. Saknas betyder att det inte finns någon tillhörande enhet.",
+ "batch": "Ett strängattribut som kan användas för att identifiera en grupp enheter. Fältet Grupptagg i Intune mappar till OrderID-attributet på Microsoft Entra-enheter.",
+ "dateAssigned": "Tidsstämpel för när profilen tilldelades enheten.",
+ "deviceAccountPwd": "Lösenord för enhetskonto för Surface Hub enheter. Om du anger det fyller du även i enhetskontot och det egna namnet.",
+ "deviceAccountUpn": "E-post för enhetskonto för Surface Hub enheter. Om du anger det fyller du även i lösenordet för enhetskontot och det egna namnet.",
+ "deviceDisplayName": "Ange ett unikt namn för en enhet. Det här namnet ignoreras i Microsoft Entra-hybridanslutna distributioner. Enhetsnamnet kommer fortfarande från domänanslutningsprofilen för Microsoft Entra-hybridenheter.",
+ "deviceFriendlyName": "Eget namn på enheten för Surface Hub enheter. Om du anger det fyller du även i lösenordet för enhetskontot och enhetskontot.",
+ "deviceName": "Namnet som visas när någon försöker identifiera och ansluta till enheten.",
+ "deviceUseType": " Enheten installeras baserat på ditt val. Du kan alltid ändra det här senare i inställningarna.\r\n
\r\n
För möten och presentationer aktiveras inte Windows Hello och data tas bort efter varje session.\r\n
\r\n
För gruppsamarbete aktiveras Windows Hello och profiler sparas för snabb inloggning
\r\n
",
+ "enrollmentState": "Anger om enheten är registrerad.",
+ "intuneDevice": "Gå till enhetsinformationen för tillhörande enhet. Saknas betyder att det inte finns någon tillhörande enhet.",
+ "lastContacted": "Tidsstämpel för när enheten senast kontaktades.",
+ "make": "Den valda enhetens tillverkare.",
+ "model": "Den valda enhetens modell",
+ "profile": "Namn på den profil som har tilldelats enheten.",
+ "profileStatus": "Anger om en profil har tilldelats enheten.",
+ "purchaseOrderId": "Inköpsorder-ID",
+ "resourceAccount": "Enhetens identitet eller användarhuvudnamn (UPN).",
+ "serialNumber": "Den valda enhetens serienummer.",
+ "userPrincipalName": "Användare för ifylld autentisering när enheten ställs in."
+ },
+ "allDevices": "Alla enheter",
+ "allDevicesAlreadyAssignedError": "En Autopilot-profil har redan tilldelats Alla enheter.",
+ "assignFailedDescription": "Det gick inte att uppdatera tilldelningar för {0}.",
+ "assignFailedTitle": "Det gick inte att uppdatera Autopilot-profiltilldelningar.",
+ "assignSuccessDescription": "Tilldelningar har uppdaterats för {0}.",
+ "assignSuccessTitle": "Autopilot-profiltilldelningarna har uppdaterats.",
+ "assignSufaceHub2ProfileNextStep": "Nästa steg i distributionen",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Koppla den här profilen till minst en enhetsgrupp",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Koppla ett resurskonto till varje Surface Hub-enhet som profilen ska distribueras till",
+ "assignedDevicesCount": "Tilldelade enheter",
+ "assignedDevicesResourceAccountDescription": "
Om du vill distribuera den här profilen till en enhet måste du tilldela enheten ett resurskonto. Välj en enhet åt gången om du vill tilldela ett befintligt resurskonto eller skapa ett nytt. Läs mer om resurskonton
",
+ "assignedDevicesResourceAccountStatusBarMessage": "I den här tabellen visas bara Surface Hub 2-enheter som har tilldelats den här profilen.",
+ "assigningDescription": "Uppdaterar tilldelningar för {0}.",
+ "assigningTitle": "Uppdaterar Autopilot-profiltilldelningar.",
+ "autoremediationContext": "Vi har upptäckt en maskinvaruändring på den här enheten. Vi försöker registrera den nya maskinvaran automatiskt. Du behöver inte göra något nu; kommer statusen att uppdateras vid nästa incheckning med resultatet. Läs mer om hur du återställer profilen.",
+ "autoremediationTitle": "Enheten {0} har en väntande korrigering",
+ "cannotDeleteMessage": "Den här profilen har tilldelats grupper. Du måste ta bort tilldelningen för alla grupper från den här profilen innan du kan ta bort den.",
+ "cannotDeleteTitle": "Det går inte att ta bort {0}",
+ "createdDateTime": "Skapad",
+ "deleteMessage": "Om du tar bort den här AutoPilot-profilen visas alla enheter som är tilldelade till den här profilen som otilldelade.",
+ "deleteMessageWithPolicySet": "{0} ingår i en eller flera principuppsättningar. Om du tar bort {0} kan du inte längre tilldela den via de principuppsättningarna.",
+ "deleteTitle": "Vill du ta bort den här profilen?",
+ "description": "Beskrivning",
+ "deviceType": "Enhetstyp",
+ "deviceUse": "Enhetsanvändning",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot har bara stöd för Microsoft Entra-anslutning för Surface Hub 2-enheter. Ange hur enheter ska ansluta till Active Directory (AD) i din organisation.\r\n
\r\n
\r\n
\r\n Microsoft Entra-anslutning: Enbart molnet utan en lokal Windows Server Active Directory.\r\n
\r\n Ange hur enheter ska ansluta till Active Directory (AD) i din organisation:\r\n
\r\n
\r\n
\r\n Microsoft Entra-ansluten: Enbart molnet utan en lokal Windows Server Active Directory\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Ett fel uppstod när antalet tilldelade enheter hämtades.",
+ "getAssignmentsError": "Ett fel inträffade när Autopilot-profiltilldelningarna hämtades.",
+ "harvestDeviceId": "Omvandla alla målenheter till Autopilot",
+ "harvestDeviceIdDescription": "Den här profilen kan som standard bara tillämpas på Autopilot-enheter som har synkroniserats från Autopilot-tjänsten.",
+ "harvestDeviceIdInfo": "\r\n Välj Ja om du vill registrera alla målenheter på Autopilot om de inte redan är registrerade. Nästa gång registrerade enheter genomgår Windows välkomstprogram kommer de genomgå det tilldelade Autopilot-scenariot.\r\n \r\n Tänk på att det för vissa Autopilot-scenarier krävs särskilda minimiversioner av Windows. Se till att din enhet har den minimiversion som krävs för att genomgå scenariot.\r\n \r\n Berörda enheter tas inte bort från Autopilot när profilen tas bort. Om du vill ta bort enheten från Autopilot använder du vyn över Windows Autopilot-enheter.\r\n ",
+ "harvestDeviceIdWarning": "Efter omvandlingen kan du bara återställa Autopilot-enheter genom att ta bort dem från listan över Autopilot-enheter.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Med Windows AutoPilot-distributionsprofiler kan du anpassa hela välkomstupplevelsen för dina enheter.",
+ "invalidProfileNameMessage": "Tecknet \"{0}\" är inte tillåtet",
+ "joinTypeLabel": "Anslut till Microsoft Entra ID som",
+ "lastModifiedDateTime": "Senast ändrad:",
+ "manualRemediationContext": "Vi har upptäckt en maskinvaruändring på den här enheten. Den får inte automatiskt en Autopilot-profil när den återställs om du inte registrerar enheten igen. Läs mer om hur du återställer profilen.",
+ "manualRemediationTitle": "Enheten {0} behöver din uppmärksamhet",
+ "name": "Namn",
+ "noAutopilotProfile": "Inga AutoPilot-profiler",
+ "notEnoughPermissionAssignedError": "Du har inte behörighet att koppla den här profilen till en eller flera av de valda grupperna. Kontakta administratören.",
+ "profile": "profil",
+ "resourceAccountStatusBarMessage": "Ett resurskonto krävs för varje Surface Hub 2-enhet som den här profilen har distribuerats till. Klicka här om du vill läsa mer.",
+ "selectServices": "Välj katalogtjänsten som enheter ska ansluta till",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Distributionsläge",
+ "windowsPCCommandMenu": "Windows-dator",
+ "directoryServiceLabel": "Anslut till Microsoft Entra ID som"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Hanterade enheter",
+ "devicesWithoutEnrollment": "Hanterade appar"
+ },
+ "AppProtection": {
+ "allAppTypes": "Rikta till alla typer av appar",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Appar i Android Work-profil",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Appar på dedikerade Android Enterprise-enheter med delat Microsoft Entra-läge",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Appar på Android-projekt med öppen källkod som är associerade",
+ "appsOnAndroidOpenSourceProjectUserless": "Appar på Android-projekt med öppen källkod Användarlöst",
+ "appsOnIntuneManagedDevices": "Appar på Intune-hanterade enheter",
+ "appsOnUnmanagedDevices": "Appar på ohanterade enheter",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Ej tillgänglig",
+ "windows10PlatformLabel": "Windows 10 och senare",
+ "withEnrollment": "Med registrering",
+ "withoutEnrollment": "Utan registrering"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Project Online Desktop Client",
+ "visioProRetail": "Visio Online, abonnemang 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Det gick inte att ta bort {0}",
+ "failureCa": "Det gick inte att ta bort {0} eftersom certifikatutfärdarprinciper refererar till den",
+ "modifying": "Tar bort {0}",
+ "success": "{0} har tagits bort"
+ },
+ "Notify": {
+ "failure": "Det gick inte att uppdatera {0}",
+ "modifying": "Ändrar {0}",
+ "success": "Uppdaterade {0}"
+ },
+ "menuLabel": "Autentiseringssammanhang"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Läs mer om att kräva autentiseringsmetoder som uppfylls av federationsprovidrar.",
+ "certificate": "Certifikatautentisering",
+ "infoBubble": "Ange en nödvändig autentiseringsmetod som måste uppfyllas av en federationsprovider, t.ex. ADFS.",
+ "multifactor": "Multifaktorautentisering",
+ "require": "Kräv federerad autentiseringsmetod (förhandsversion)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "En princip för beständig webbläsarsession fungerar bara korrekt när Alla molnappar har valts. Uppdatera ditt val av molnappar."
+ },
+ "Option": {
+ "always": "Alltid beständig",
+ "help": "En beständig webbläsarsession tillåter användare att förbli inloggade efter det att de har stängt sitt webbläsarfönster och öppnat det igen. \n
\n
Den här inställningen fungerar korrekt när du har valt Alla molnappar
\n
Det här påverkar inte tokenlivstider eller inställningen av inloggningsfrekvens.
\n
Det här åsidosätter principen Visa alternativ att fortsätta vara inloggad i Företagsanpassning.
\n
Inställningen Aldrig beständig åsidosätter alla beständiga anspråk för enkel inloggning som skickas från federerade autentiseringstjänster.
\n
Inställningen Aldrig beständig förhindrar enkel inloggning på mobila enheter för alla program och mellan program och användarens mobila webbläsare.
\n",
+ "label": "Beständig webbläsarsession",
+ "never": "Aldrig beständig"
+ },
+ "Warning": {
+ "allApps": "En beständig webbläsarsession fungerar bara korrekt när Alla molnappar har valts. Ändra valet för dina molnappar. Klicka här för att läsa mer."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Timmar eller dagar",
+ "value": "Frekvens"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} dagar",
+ "singular": "1 dag"
+ },
+ "Hour": {
+ "plural": "{0} timmar",
+ "singular": "1 timme"
+ },
+ "daysOption": "Dagar",
+ "everytime": "Varje gång",
+ "help": "Tidsperiod innan en användare uppmanas att logga in igen när de försöker komma åt en resurs. Standardinställningen är ett rullande fönster på 90 dagar, d.v.s. användare ombeds återautentisera sig vid det första försöket att komma åt en resurs efter att ha varit inaktiva på sin dator i 90 dagar eller längre.",
+ "hoursOption": "Timmar",
+ "label": "Inloggningsfrekvens",
+ "placeholder": "Välj enheter "
+ }
+ },
+ "mainOption": "Ändra sessionens livstid",
+ "mainOptionHelp": "Konfigurera hur ofta användare tillfrågas och om webbläsarsessioner är beständiga. Program som inte stöder moderna autentiseringsprotokoll kanske inte tar hänsyn till dessa principer. Kontakta i sådana fall programutvecklaren."
+ },
+ "SingleSelectorActive": {
+ "failed": "Det gick inte att läsa in den här informationen.",
+ "reattempt": "Läser in data. Försök igen med {0} av {1}."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Välj katalogroller"
+ },
+ "Excluded": {
+ "gridAria": "Lista över exkluderade användare"
+ },
+ "Included": {
+ "gridAria": "Lista över inkluderade användare"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Katalogroller\" innehåller minst en anpassad roll",
+ "customRoleSelected": "Minst en anpassad roll har valts",
+ "failed": "{0} måste konfigureras",
+ "roles": "Välj minst en roll",
+ "usersGroups": "Välj minst en användare eller grupp"
+ },
+ "learnMore": "Kontrollera åtkomst baserat på vem principen gäller för, till exempel användare och grupper, arbetsbelastningsidentiteter, katalogroller eller externa gäster."
+ },
+ "advancedTabText": "Avancerad",
+ "allCloudAppsErrorBox": "Du måste välja \"Alla molnappar\" när beviljandet \"Tillåt lösenordsändring\" har valts",
+ "allCloudAppsReauth": "”Alla molnappar” måste ha valts när sessionskontrollen ”Inloggningsfrekvens varje gång” och villkoret ”Inloggningsrisk” har valts",
+ "allCloudOrSpecificApps": "Sessionskontrollen Inloggningsfrekvens varje gång kräver att Alla molnappar eller appar som specifikt stöds har valts",
+ "allDayCheckboxLabel": "Dygnet runt",
+ "allDevicePlatforms": "Valfri enhet",
+ "allGuestUserInfoContent": "Omfattar Microsoft Entra B2B-gäster men inte SharePoint B2B-gäster",
+ "allGuestUserLabel": "Alla gästanvändare och externa användare",
+ "allRiskLevelsOption": "Alla risknivåer",
+ "allTrustedLocationLabel": "Alla betrodda platser",
+ "allUserGroupSetSelectorLabel": "Alla användare och grupper har valts",
+ "allUsersReauth": "Sessionskontrollen Inloggningsfrekvens varje gång kräver att Alla användare har valts",
+ "allUsersString": "Alla användare",
+ "and": "{0} OCH {1}",
+ "andWithGrouping": "({0}) och {1}",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Valfri molnapp",
+ "appContextOptionInfoContent": "Begärd autentiseringstagg",
+ "appContextOptionLabel": "Begärd autentiseringstagg (förhandsversion)",
+ "appContextUriPlaceholder": "Exempel: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "App-framtvingade begränsningar kan kräva ytterligare administratörskonfigurationer inom molnapparna. Begränsningarna börjar bara gälla för nya sessioner.",
+ "appNotSetSeletorLabel": "0 molnappar valda",
+ "appReauthNotSupported": "Den här appen stöder inte sessionskontrollen Inloggningsfrekvens varje gång.",
+ "applyConditionClientAppInfoBalloonContent": "Konfigurera klientapparna för att tillämpa principen på specifika klientappar",
+ "applyConditionDevicePlatformInfoBalloonContent": "Konfigurera enhetsplattformarna för att tillämpa principen för specifika plattformar",
+ "applyConditionDeviceStateInfoBalloonContent": "Konfigurera enhetstillståndet att tillämpa principen för specifika enhetstillstånd",
+ "applyConditionLocationInfoBalloonContent": "Konfigurera platserna för att tillämpa principen för betrodda/icke-betrodda platser",
+ "applyConditionSigninRiskInfoBalloonContent": "Konfigurera inloggningsrisken för att tillämpa principen för specifika risknivåer",
+ "applyConditionUserRiskInfoBalloonContent": "Konfigurera den användarrisk som ska tillämpa principen på valda risknivåer",
+ "applyConditonLabel": "Konfigurera",
+ "ariaLabelPolicyDisabled": "Hanteringsprincipregeln (MPR) är inaktiverad",
+ "ariaLabelPolicyEnabled": "Principen är aktiverad",
+ "ariaLabelPolicyReportOnly": "Principen är i rapportexklusivt läge",
+ "blockAccess": "Blockera åtkomst",
+ "builtInDirectoryRoleLabel": "Inbyggda katalogroller",
+ "casCustomControlInfo": "Anpassade principer måste konfigureras i Cloud App Security-portalen. Den här kontrollen fungerar direkt för aktuella appar och kan installeras automatiskt för alla appar. Klicka här om du vill läsa mer om båda scenarierna.",
+ "casInfoBubble": "Den här kontrollen fungerar för olika molnappar.",
+ "casPreconfiguredControlInfo": "Den här kontrollen fungerar direkt för aktuella appar och kan installeras automatiskt för alla appar. Klicka här om du vill läsa mer om båda scenarierna.",
+ "cert64DownloadCol": "Ladda ned base64-certifikat",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Hämta certifikat",
+ "certDurationCol": "Förfallodatum",
+ "certDurationStartCol": "Giltigt från",
+ "certName": "VpnCert",
+ "certainApps": "Endast appar som specifikt stöds är aktiverade för Inloggningsfrekvens varje gång om beviljandena Kräv multifaktorautentisering och Kräv lösenordsändring inte har valts",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Välj program",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Valda program",
+ "chooseApplicationsEmpty": "Inga program",
+ "chooseApplicationsNone": "Ingen",
+ "chooseApplicationsNoneFound": "Vi hittade inte \"{0}\". Försök med ett annat namn eller ID.",
+ "chooseApplicationsPlural": "{0} och {1} till",
+ "chooseApplicationsReAuthEverytimeInfo": "Letar du efter din app? Vissa program kan inte användas med sessionskontrollen Kräv omautentisering – varje gång",
+ "chooseApplicationsRemove": "Ta bort",
+ "chooseApplicationsReturnedPlural": "{0} program hittades",
+ "chooseApplicationsReturnedSingular": "1 program hittades",
+ "chooseApplicationsSearchBalloon": "Sök efter ett program genom att ange dess namn eller ID.",
+ "chooseApplicationsSearchHint": "Sök program...",
+ "chooseApplicationsSearchLabel": "Program",
+ "chooseApplicationsSearching": "Söker...",
+ "chooseApplicationsSelect": "Välj",
+ "chooseApplicationsSelected": "Vald",
+ "chooseApplicationsSingular": "{0} och 1 till",
+ "chooseApplicationsTooMany": "Fler resultat än vad som kan visas. Filtrera med sökrutan.",
+ "chooseLocationCorpnetItem": "Företagsnätverk",
+ "chooseLocationSelectedLocationsLabel": "Valda platser",
+ "chooseLocationTrustedIpsItem": "Betrodda IP-adresser för multifaktorautentisering",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Välj platser",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Valda platser",
+ "chooseLocationsEmpty": "Inga platser",
+ "chooseLocationsExcludedSelectorTitle": "Markera",
+ "chooseLocationsIncludedSelectorTitle": "Markera",
+ "chooseLocationsNone": "Ingen",
+ "chooseLocationsNoneFound": "Vi hittade inte \"{0}\". Försök med ett annat namn eller ID.",
+ "chooseLocationsPlural": "{0} och {1} till",
+ "chooseLocationsRemove": "Ta bort",
+ "chooseLocationsReturnedPlural": "{0} platser hittades",
+ "chooseLocationsReturnedSingular": "1 plats hittades",
+ "chooseLocationsSearchBalloon": "Sök efter en plats genom att ange dess namn.",
+ "chooseLocationsSearchHint": "Sök efter platser...",
+ "chooseLocationsSearchLabel": "Sökvägar",
+ "chooseLocationsSearching": "Söker...",
+ "chooseLocationsSelect": "Markera",
+ "chooseLocationsSelected": "markerat",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Markera",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Markera",
+ "chooseLocationsSingular": "{0} och 1 till",
+ "chooseLocationsTooMany": "Fler resultat än vad som kan visas. Filtrera med sökrutan.",
+ "claimProviderAddCommandText": "Ny anpassad kontroll",
+ "claimProviderAddNewBladeTitle": "Ny anpassad kontroll",
+ "claimProviderDeleteCommand": "Ta bort",
+ "claimProviderDeleteDescription": "Vill du ta bort {0}? Du kan inte ångra den här åtgärden.",
+ "claimProviderDeleteTitle": "Är du säker?",
+ "claimProviderEditInfoText": "Ange JSON för anpassade kontroller som du fått av dina anspråksproviders.",
+ "claimProviderNotificationCreateDescription": "Skapar en anpassad kontroll som heter {0}",
+ "claimProviderNotificationCreateFailedDescription": "Det gick inte att skapa den anpassade kontrollen {0}. Försök igen senare.",
+ "claimProviderNotificationCreateFailedTitle": "Det gick inte att skapa den anpassade kontrollen",
+ "claimProviderNotificationCreateSuccessDescription": "Den anpassade kontrollen {0} skapades",
+ "claimProviderNotificationCreateSuccessTitle": "{0} har skapats",
+ "claimProviderNotificationCreateTitle": "{0} skapas",
+ "claimProviderNotificationDeleteDescription": "Tar bort den anpassade kontrollen som heter {0}",
+ "claimProviderNotificationDeleteFailedDescription": "Det gick inte att ta bort den anpassade kontrollen {0}. Försök igen senare.",
+ "claimProviderNotificationDeleteFailedTitle": "Det gick inte att ta bort den anpassade kontrollen",
+ "claimProviderNotificationDeleteSuccessDescription": "Den anpassade kontrollen som heter {0} togs bort",
+ "claimProviderNotificationDeleteSuccessTitle": "{0} har tagits bort",
+ "claimProviderNotificationDeleteTitle": "Tar bort {0}",
+ "claimProviderNotificationUpdateDescription": "Uppdaterar den anpassade kontrollen som heter {0}",
+ "claimProviderNotificationUpdateFailedDescription": "Det gick inte att uppdatera den anpassade kontrollen {0}. Försök igen senare.",
+ "claimProviderNotificationUpdateFailedTitle": "Det gick inte att uppdatera den anpassade kontrollen",
+ "claimProviderNotificationUpdateSuccessDescription": "Den anpassade kontrollen som heter {0} uppdaterades",
+ "claimProviderNotificationUpdateSuccessTitle": "{0} har uppdaterats",
+ "claimProviderNotificationUpdateTitle": "Uppdaterar {0}",
+ "claimProviderValidationAppIdInvalid": "AppId-värdet är inte giltigt. Granska det och försök igen.",
+ "claimProviderValidationClientIdMissing": "Data saknar ett ClientId-värde. Granska och försök igen.",
+ "claimProviderValidationControlClaimsRequestedMissing": "Kontrollen saknar ett ClaimsRequested-värde. Granska och försök igen.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "Objektet ClaimsRequested saknar ett Typ-värde. Granska och försök igen.",
+ "claimProviderValidationControlIdAlreadyExists": "Kontroll Id-värdet finns redan. Granska och försök igen.",
+ "claimProviderValidationControlIdMissing": "Kontroll saknar ett Id-värde. Granska och försök igen.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "Kontroll Id-värdet kan inte tas bort eftersom det refereras till i en befintlig princip. Ta bort det från principen först.",
+ "claimProviderValidationControlIdTooManyControls": "Egenskapen Control har för många kontroller. Granska och försök igen.",
+ "claimProviderValidationControlIdValueReserved": "Kontroll Id-värdet är ett reserverat nyckelord. Använd ett annat id.",
+ "claimProviderValidationControlNameAlreadyExists": "Kontroll Namn-värdet finns redan. Granska och försök igen.",
+ "claimProviderValidationControlNameMissing": "Kontroll saknar ett Namn-värde. Granska och försök igen.",
+ "claimProviderValidationControlsMissing": "Data saknar ett Kontroller-värde. Granska och försök igen.",
+ "claimProviderValidationDiscoveryUrlMissing": "Data saknnar ett DiscoveryUrl-värde. Granska och försök igen.",
+ "claimProviderValidationInvalid": "De data som angetts är inte giltiga. Granska och försök igen.",
+ "claimProviderValidationInvalidJsonDefinition": "Det går inte att spara den anpassade kontrollen. Granska JSON-texten och försök igen.",
+ "claimProviderValidationNameAlreadyExists": "Namn-värdet finns redan. Granska och försök igen.",
+ "claimProviderValidationNameMissing": "Data saknar ett Namn-värde. Granska och försök igen.",
+ "claimProviderValidationUnknown": "Ett okänt fel uppstod vid validering av angivna data. Granska och försök igen.",
+ "claimProvidersNone": "Inga anpassade kontroller",
+ "claimProvidersSearchPlaceholder": "Genomsök kontroller.",
+ "classicPoilcyFilterTitle": "Visa",
+ "classicPolicyAllPlatforms": "Alla plattformar",
+ "classicPolicyClientAppBrowserAndNative": "Webbläsare, mobilappar och stationära klienter",
+ "classicPolicyCloudAppTitle": "Molnprogram",
+ "classicPolicyControlAllow": "Tillåt",
+ "classicPolicyControlBlock": "Blockera",
+ "classicPolicyControlBlockWhenNotAtWork": "Blockera åtkomst när du inte arbetar",
+ "classicPolicyControlRequireCompliantDevice": "Kräv kompatibel enhet",
+ "classicPolicyControlRequireDomainJoinedDevice": "Kräv domänansluten enhet",
+ "classicPolicyControlRequireMfa": "Kräv multifaktorautentisering",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Kräv multifaktorautentisering när du inte arbetar",
+ "classicPolicyDeleteCommand": "Ta bort",
+ "classicPolicyDeleteFailTitle": "Det gick inte att ta bort den klassiska principen",
+ "classicPolicyDeleteInProgressTitle": "Den klassiska principen tas bort",
+ "classicPolicyDeleteSuccessTitle": "Den klassiska principen har tagits bort",
+ "classicPolicyDetailBladeTitle": "Information",
+ "classicPolicyDisableCommand": "Inaktivera",
+ "classicPolicyDisableConfirmation": "Är du säker på att du vill inaktivera {0}? Du kan inte ångra den här åtgärden.",
+ "classicPolicyDisableFailDescription": "Det gick inte att inaktivera {0}",
+ "classicPolicyDisableFailTitle": "Det gick inte att inaktivera den klassiska principen",
+ "classicPolicyDisableInProgressDescription": "Inaktiverar {0}",
+ "classicPolicyDisableInProgressTitle": "Den klassiska principen inaktiveras",
+ "classicPolicyDisableSuccessDescription": "{0} har inaktiverats",
+ "classicPolicyDisableSuccessTitle": "Den klassiska principen har inaktiverats",
+ "classicPolicyEasSupportedPlatforms": "Plattformar som stöds av Exchange ActiveSync",
+ "classicPolicyEasUnsupportedPlatforms": "Plattformar som inte stöds av Exchange ActiveSync",
+ "classicPolicyExcludedPlatformsTitle": "Exkluderade enhetsplattformar",
+ "classicPolicyFilterAll": "Alla principer",
+ "classicPolicyFilterDisabled": "Inaktiverade principer",
+ "classicPolicyFilterEnabled": "Aktiverade principer",
+ "classicPolicyIncludeExcludeMembersDescription": "Du kan utföra fasindelad principmigrering genom att exkludera grupper.",
+ "classicPolicyIncludeExcludeMembersTitle": "Inkludera/exkludera grupper",
+ "classicPolicyIncludedPlatformsTitle": "Inkluderade enhetsplattformar",
+ "classicPolicyManualMigrationMessage": "Den här principen måste migreras manuellt.",
+ "classicPolicyMigrateCommand": "Migrera",
+ "classicPolicyMigrateConfirmation": "Är du säker på att du vill migrera {0}? Den här principen kan bara migreras en gång.",
+ "classicPolicyMigrateFailDescription": "Det gick inte att migrera {0}",
+ "classicPolicyMigrateFailTitle": "Det gick inte att migrera den klassiska principen",
+ "classicPolicyMigrateInProgressDescription": "Migrerar {0}",
+ "classicPolicyMigrateInProgressTitle": "Den klassiska principen migreras",
+ "classicPolicyMigrateRecommendText": "Rekommendation: Migrera till de nya Azure-portalprinciperna.",
+ "classicPolicyMigrateSuccessTitle": "Den klassiska principen har migrerats",
+ "classicPolicyMigratedSuccessDescription": "Den klassiska principen kan nu hanteras under principer.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "Den här klassiska principen migreras som {0} nya principer. Nya principer kan hanteras under principer.",
+ "classicPolicyNoEditPermissionMsg": "Du har inte behörighet att redigera den här principen. Endast globala administratörer eller säkerhetsadministratörer kan redigera principen. Klicka här för mer information.",
+ "classicPolicySaveFailDescription": "Det gick inte att spara {0}",
+ "classicPolicySaveFailTitle": "Det gick inte att spara den klassiska principen",
+ "classicPolicySaveInProgressDescription": "Sparar {0}",
+ "classicPolicySaveInProgressTitle": "Den klassiska principen sparas",
+ "classicPolicySaveSuccessDescription": "{0} har sparats",
+ "classicPolicySaveSuccessTitle": "Den klassiska principen har sparats",
+ "clientAppBladeLegacyInfoBanner": "Bakåtkompatibel autentisering stöds inte för tillfället",
+ "clientAppBladeLegacyUpsellBanner": "Blockera klientappar utan support (förhandsversion)",
+ "clientAppBladeTitle": "Klientappar",
+ "clientAppDescription": "Välj de klientappar som den här principen ska gälla för",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync stöder inte alla andra villkor",
+ "clientAppLearnMore": "Kontrollera användaråtkomsten med fokus på särskilda klientprogram som inte använder modern autentisering.",
+ "clientAppLegacyHeader": "Äldre autentiseringsklienter",
+ "clientAppMobileDesktop": "Mobila appar och skrivbordsklienter",
+ "clientAppModernHeader": "Moderna autentiseringsklienter",
+ "clientAppOnlySupportedPlatforms": "Tillämpa bara principen på plattformar som stöds",
+ "clientAppSelectSpecificClientApps": "Välj klientappar",
+ "clientAppWebBrowser": "Webbläsare",
+ "clientAppsSelectedLabel": "{0} inkluderade",
+ "clientTypeBrowser": "Webbläsare",
+ "clientTypeEas": "Exchange ActiveSync-klienter",
+ "clientTypeEasInfo": "Exchange ActiveSync-klienter som enbart använder äldre autentisering.",
+ "clientTypeModernAuth": "Moderna autentiseringsklienter",
+ "clientTypeOtherClients": "Övriga klienter",
+ "clientTypeOtherClientsInfo": "Detta omfattar äldre Office-klienter och andra e-postprotokoll (POP, IMAP, SMTP osv). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "{0} molnappar som konfigurerats i den här principen har tagits bort från katalogen, men detta påverkar inte andra program i principen. Nästa gång som du uppdaterar programavsnittet i principen tas de borttagna apparna automatiskt bort från den.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Alla Microsoft-appar",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Tillåt Microsofts molnappar, skrivbordsappar och mobilappar (förhandsversion)",
+ "cloudappsSelectionBladeAllCloudapps": "Alla molnappar",
+ "cloudappsSelectionBladeExcludeDescription": "Välj vilka molnappar som ska undantas principen",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Välj exkluderade molnappar",
+ "cloudappsSelectionBladeIncludeDescription": "Välj de molnappar som den här principen ska gälla för",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Välj",
+ "cloudappsSelectionBladeSelectedCloudapps": "Välj appar",
+ "cloudappsSelectorInfoBallonText": "Tjänster som användaren har åtkomst till för att göra sitt arbete. Exempelvis Salesforce",
+ "cloudappsSelectorPluralExcluded": "{0} appar som undantas",
+ "cloudappsSelectorPluralIncluded": "{0} appar ingår",
+ "cloudappsSelectorSingularExcluded": "1 app undantas",
+ "cloudappsSelectorSingularIncluded": "1 app ingår",
+ "cloudappsSelectorUserPlural": "{0} appar",
+ "cloudappsSelectorUserSingular": "1 app",
+ "conditionLabelMulti": "{0} villkor valda",
+ "conditionLabelOne": "1 villkor valt",
+ "conditionalAccessBladeTitle": "Villkorad åtkomst",
+ "conditionsNotSelectedLabel": "Inte konfigurerad",
+ "conditionsReqMfaReauthSet": "Vissa alternativ är inte tillgängliga på grund av beviljandet Kräv multifaktorautentisering och sessionskontrollen ”inloggningsfrekvens varje gång” har valts",
+ "conditionsReqPwSet": "Vissa alternativ är inte tillgängliga pga att beviljandet \"Kräv lösenordsändring\" har valts",
+ "configureCasText": "Konfigurera Cloud App Security",
+ "configureCustomControlsText": "Konfigurera anpassad princip",
+ "controlLabelMulti": "{0} kontroller valda",
+ "controlLabelOne": "1 kontroll vald",
+ "controlValidatorText": "Välj minst en kontroll",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Läs mer om att kräva kompatibla enheter.",
+ "controlsDeviceComplianceInfoBubble": "Enheten måste vara Intune-kompatibel. Om enheten inte är kompatibel ombeds användaren att göra enheten kompatibel.",
+ "controlsDomainJoinedAriaLabel": "Läs mer om att kräva Microsoft Entra-hybridanslutna enheter.",
+ "controlsDomainJoinedInfoBubble": "Enheter måste vara Microsoft Entra-hybridanslutna.",
+ "controlsMamAriaLabel": "Läs mer om att kräva godkända klientprogram.",
+ "controlsMamInfoBubble": "Enheten måste använda de här godkända programmen.",
+ "controlsMfaInfoBubble": "Användaren måste slutföra ytterligare säkerhetskrav, exempelvis ett telefonsamtal eller textmeddelande",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Läs mer om att kräva principskyddade appar.",
+ "controlsRequireCompliantAppInfoBubble": "Enheten måste använda principskyddade appar.",
+ "controlsRequirePasswordResetAriaLabel": "Läs mer om att kräva en lösenordsändring.",
+ "controlsRequirePasswordResetInfoBubble": "Minska användarrisken genom att kräva lösenordsändring. Det här alternativet kräver också multifaktorautentisering. Det går inte att använda övriga kontroller.",
+ "countriesRadiobuttonInfoBalloonContent": "Landet/regionen som en inloggning kommer från fastställs av användarens IP-adress.",
+ "createNewVpnCert": "Nytt certifikat",
+ "createdTimeLabel": "Skapandetid",
+ "customRoleLabel": "Anpassade roller (stöds inte)",
+ "dateRangeTypeLabel": "Datumintervall",
+ "daysOfWeekPlaceholderText": "Filtrera veckodagarna",
+ "daysOfWeekTypeLabel": "Veckodagar",
+ "deletePolicyNoLicenseText": "Du kan ta bort den här principen nu. När den väl är borttagen kan du inte återskapa den förrän du har de licenser som krävs.",
+ "descriptionContentForControlsAndOr": "För flera kontroller",
+ "devicePlatform": "Enhetsplattform",
+ "devicePlatformConditionHelpDescription": "Tillämpa principen för valda enhetsplattformar.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} inkluderade",
+ "devicePlatformIncludeExclude": "{0} och {1} exkluderades",
+ "devicePlatformNoSelectionError": "Om du ska välja enhetsplattformar måste du först välja ett underordnat objekt.",
+ "devicePlatformsNone": "Ingen",
+ "deviceSelectionBladeExcludeDescription": "Välj plattformar som ska undantas principen",
+ "deviceSelectionBladeIncludeDescription": "Välj enhetsplattformarna att inkludera i den här principen",
+ "deviceStateAll": "Alla enhetstillstånd",
+ "deviceStateCompliant": "Enheten markerades som kompatibel",
+ "deviceStateCompliantInfoContent": "Enheter som är Intune-kompatibla kommer att uteslutas från bedömningen av den här principen så att om principen blockerar åtkomst till exempel så blockeras alla enheter utom de som är Intune-kompatibla.",
+ "deviceStateConditionConfigureInfoContent": "Konfigurera princip baserat på enhetstillstånd",
+ "deviceStateConditionSelectorInfoContent": "Huruvida den enhet som användaren loggar in från är Microsoft Entra-hybridansluten eller markerad som kompatibel.\n Det här har tagits ur bruk. Använd {1} istället.",
+ "deviceStateConditionSelectorLabel": "Enhetstillstånd (ur bruk)",
+ "deviceStateDomainJoined": "Microsoft Entra-hybridansluten enhet",
+ "deviceStateDomainJoinedInfoContent": "Enheter som är Microsoft Entra-hybridanslutna utesluts från utvärderingen av den här policyn. Så om policyn t.ex. blockerar åtkomst, blockeras alla enheter utom de som är Microsoft Entra-hybridanslutna.",
+ "deviceStateDomainJoinedInfoLinkText": "Läs mer.",
+ "deviceStateExcludeDescription": "Välj det enhetstillståndsvillkor som används för att utesluta enheter från principen.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} och uteslut {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} och uteslut {1}, {2}",
+ "directoryRoleInfoContent": "Tilldela inbyggda katalogroller en princip.",
+ "directoryRolesLabel": "Katalogroller",
+ "discardbutton": "Ta bort",
+ "downloadDefaultFileName": "IP-intervall",
+ "downloadExampleFileName": "Exempel",
+ "downloadExampleHeader": "Detta är en exempelfil med demonstationer av de typer av data som kan godkännas. Rader som börjar med # ignoreras.",
+ "duplicate": "Duplicera",
+ "duplicatePolicyName": "{0} KOPIERA",
+ "endDatePickerLabel": "Slutar",
+ "endTimePickerLabel": "Sluttid",
+ "enterCountryText": "IP-adress och land/region utvärderas parvis. Välj land.",
+ "enterIpText": "IP-adress och land/region utvärderas parvis. Ange IP-adressen.",
+ "enterUserText": "Ingen användare har valts. Välj en användare.",
+ "evaluationResult": "Utvärderingsresultat",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync enbart med plattformar som stöds",
+ "excludeAllTrustedLocationSelectorText": "alla betrodda platser",
+ "featureRequiresP2": "Den här funktionen kräver Microsoft Entra ID P2-licens.",
+ "friday": "fredag",
+ "grantControls": "Bevilja kontroller",
+ "gridNetworkTrusted": "Betrodda",
+ "gridPolicyCreatedDateTime": "Skapandedatum",
+ "gridPolicyEnabled": "Aktiverad",
+ "gridPolicyModifiedDateTime": "Ändringsdatum",
+ "gridPolicyName": "Principnamn",
+ "gridPolicyState": "Tillstånd",
+ "groupSelectionBladeExcludeDescription": "Välj de grupper som ska undantas från principen",
+ "groupSelectionBladeExcludedSelectorTitle": "Välj exkluderade grupper",
+ "groupSelectionBladeSelect": "Välj grupper",
+ "groupSelectorInfoBallonText": "De användare och grupper i katalogen som principen tillämpas på. Exempel: pilotgrupp",
+ "groupsSelectionBladeTitle": "Grupper",
+ "helpCommonScenariosText": "Är du intresserad av några vanliga scenarion?",
+ "helpCondition1": "När en användare befinner sig utanför företagets nätverk",
+ "helpCondition2": "När användare i gruppen Chefer loggar in",
+ "helpConditionsTitle": "Villkor",
+ "helpControl1": "De måste logga in med multifaktorautentisering",
+ "helpControl2": "De måste arbeta från en Intune-kompatibel eller domänansluten enhet",
+ "helpControlsTitle": "Kontroller",
+ "helpIntroText": "Med villkorsstyrd åtkomst kan du framtvinga åtkomstkrav under vissa förhållanden. Här följer några exempel",
+ "helpIntroTitle": "Vad är villkorsstyrd åtkomst?",
+ "helpLearnMoreText": "Vill du veta mer om villkorsstyrd åtkomst?",
+ "helpStartStep1": "Skapa din första princip genom att klicka på \"+ Ny princip\"",
+ "helpStartStep2": "Ange princip Villkor och kontroller",
+ "helpStartStep3": "Glöm inte att aktivera principen och skapa när du är klar",
+ "helpStartTitle": "Kom igång",
+ "highRisk": "Hög",
+ "includeAndExcludeAppsTextFormat": "Inkludera: {0}. Exkludera: {1}.",
+ "includeAppsTextFormat": "Inkluderra: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Okända områden är IP-adresser som inte kan mappas till ett land/region.",
+ "includeUnknownAreasCheckboxLabel": "Inkludera okända områden",
+ "infoCommandLabel": "Info",
+ "invalidCertDuration": "Ogiltig varaktighet för certifikat",
+ "invalidIpAddress": "Värdet måste vara en giltig IP-adress",
+ "invalidReAuthSignInRiskOptionSelected": "Sessionskontrollen “inloggningsfrekvens varje gång” tillåter inte alternativet “ingen risk” i villkorskontrollen “inloggningsrisk”.",
+ "invalidUriErrorMsg": "Ange en giltig URI. Till exempel, uri:contoso.com:acr",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Läs in alla",
+ "loading": "Laddar...",
+ "locationConfigureNamedLocationsText": "Konfigurera alla betrodda platser",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Platsnamnet är för långt. Maximalt antal tecken är 256",
+ "locationSelectionBladeExcludeDescription": "Välj de platser som ska undantas principen",
+ "locationSelectionBladeIncludeDescription": "Välj platserna att inkludera i den här principen",
+ "locationsAllLocationsLabel": "Vilken plats som helst",
+ "locationsAllNamedLocationsLabel": "Alla betrodda IP-adresser",
+ "locationsAllPrivateLinksLabel": "Alla privata länkar i min klientorganisation",
+ "locationsIncludeExcludeLabel": "{0} och uteslut alla betrodda IP-adresser",
+ "locationsSelectedPrivateLinksLabel": "Valda privata länkar",
+ "lowRisk": "Låg",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "Om du vill hantera principer för villkorsstyrd åtkomst måste organisationen ha Microsoft Entra ID P1 eller P2.",
+ "manageSecurityDefaultsAriaLabel": "Hantera standardsäkerhetsinställningarna.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Inloggning från en betrodd plats sänker en användares inloggningsrisk. Markera bara den här platsen som betrodd om du känner till att de IP-intervall som angetts är etablerade och trovärdiga inom din organisation.",
+ "markAsTrustedCheckboxLabel": "Markera som betrodd plats",
+ "mediumRisk": "Medel",
+ "memberSelectionCommandRemove": "Ta bort",
+ "menuItemClaimProviderControls": "Anpassade kontroller (förhandsversion)",
+ "menuItemClassicPolicies": "Klassiska principer",
+ "menuItemInsightsAndReporting": "Insikter och rapportering",
+ "menuItemManage": "Hantera",
+ "menuItemNamedLocationsPreview": "Namngivna platser (förhandsversion)",
+ "menuItemNamedNetworks": "Namngivna platser",
+ "menuItemPolicies": "Principer",
+ "menuItemTermsOfUse": "Användningsvillkor",
+ "modifiedTimeLabel": "Ändrad tid",
+ "monday": "måndag",
+ "nameLabel": "Namn",
+ "namedLocationCountryInfoBanner": "Endast IPv4-adresser mappas till länder/regioner. IPv6-adresser ingår i okända länder/regioner.",
+ "namedLocationTypeCountry": "Länder/regioner",
+ "namedLocationTypeLabel": "Definiera platsen med:",
+ "namedLocationUpsellBanner": "Den här vyn är inaktuell. Gå till den nya och förbättrade vyn Namngivna platser.",
+ "namedLocationsHelpDescription": "Namngivna platser används av Microsoft Entra ID-säkerhetsrapporter för att minska falskt positiva resultat och Microsoft Entra-principer för villkorsstyrd åtkomst.\n[Läs mer][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Lägg till ett nytt IP-intervall (t.ex. 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "Du måste välja minst ett land/en region",
+ "namedNetworkDeleteCommand": "Ta bort",
+ "namedNetworkDeleteDescription": "Vill du ta bort {0}? Du kan inte ångra den här åtgärden.",
+ "namedNetworkDeleteTitle": "Är du säker?",
+ "namedNetworkDownloadIpRange": "Hämta",
+ "namedNetworkInvalidRange": "Värdet måste vara ett giltigt IP-intervall.",
+ "namedNetworkIpRangeNeeded": "Du behöver minst ett giltig IP-intervall",
+ "namedNetworkIpRangesDescriptionContent": "Konfigurera IP-intervallen för din organisation",
+ "namedNetworkIpRangesTab": "IP-intervall",
+ "namedNetworkListAdd": "Ny plats",
+ "namedNetworkListConfigureTrustedIps": "Ställ in betrodda IP-adresser för multifaktorautentisering",
+ "namedNetworkNameDescription": "Exempelvis: Redmondkontoret",
+ "namedNetworkNameInvalid": "Det tillhandahållna namnet är ogiltigt.",
+ "namedNetworkNameRequired": "Du måste tillhandahålla ett namn för den här platsen.",
+ "namedNetworkNoIpRanges": "Inga IP-intervall",
+ "namedNetworkNotificationCreateDescription": "Skapa en plats med namnet {0}",
+ "namedNetworkNotificationCreateFailedDescription": "Det gick inte att skapa {0}. Försök igen senare.",
+ "namedNetworkNotificationCreateFailedTitle": "Det gick inte att skapa platsen",
+ "namedNetworkNotificationCreateSuccessDescription": "En plats med namnet {0} har skapats",
+ "namedNetworkNotificationCreateSuccessTitle": "{0} har skapats",
+ "namedNetworkNotificationCreateTitle": "{0} skapas",
+ "namedNetworkNotificationDeleteDescription": "Platsen med namnet {0} tas bort",
+ "namedNetworkNotificationDeleteFailedDescription": "Det gick inte att ta bort {0}. Försök igen senare.",
+ "namedNetworkNotificationDeleteFailedTitle": "Det gick inte att ta bort platsen",
+ "namedNetworkNotificationDeleteSuccessDescription": "Platsen med namnet {0} har tagits bort",
+ "namedNetworkNotificationDeleteSuccessTitle": "{0} har tagits bort",
+ "namedNetworkNotificationDeleteTitle": "Tar bort {0}",
+ "namedNetworkNotificationUpdateDescription": "Platsen med namnet {0} uppdateras",
+ "namedNetworkNotificationUpdateFailedDescription": "Det gick inte att ta bort platsen {0}. Försök igen senare.",
+ "namedNetworkNotificationUpdateFailedTitle": "Det gick inte att uppdatera platsen",
+ "namedNetworkNotificationUpdateSuccessDescription": "Platsen med namnet {0} har uppdaterats",
+ "namedNetworkNotificationUpdateSuccessTitle": "{0} har uppdaterats",
+ "namedNetworkNotificationUpdateTitle": "Uppdaterar {0}",
+ "namedNetworkSearchPlaceholder": "Sök efter platser.",
+ "namedNetworkUploadFailedDescription": "Ett fel inträffade när den tillhandahållna filen skulle parsas. Se till att ladda upp en oformaterad textfil där varje rad är i CIDR-format.",
+ "namedNetworkUploadFailedTitle": "Det gick inte att tolka {0}",
+ "namedNetworkUploadInProgressDescription": "Försöker parsa giltiga CIDR-värden från {0}.",
+ "namedNetworkUploadInProgressTitle": "{0} parsas",
+ "namedNetworkUploadInvalidDescription": "{0} är antingen för stor eller har ett ogiltigt format.",
+ "namedNetworkUploadInvalidTitle": "{0} Ogiltig",
+ "namedNetworkUploadIpRange": "Ladda upp",
+ "namedNetworkUploadSuccessDescription": "{0} rader har analyserats. {1} har ett dåligt format. {2} hoppades över.",
+ "namedNetworkUploadSuccessTitle": "Parsningen avslutades för {0}",
+ "namedNetworksAdd": "Ny namngiven plats",
+ "namedNetworksConditionHelpDescription": "Kontrollera användaråtkomst baserat på fysisk plats.\n[Läs mer][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} och {1} exkluderades",
+ "namedNetworksHelpDescription": "Namngivna platser används av Microsoft Entra ID-säkerhetsrapporter för att minska falskt positiva resultat och Microsoft Entra-principer för villkorsstyrd åtkomst.\n[Läs mer][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} inkluderade",
+ "namedNetworksNone": "Det gick inte att hitta några namgivna platser.",
+ "namedNetworksTitle": "Konfigurera platser",
+ "namednetworkExceedingSizeErrorBladeTitle": "Felinformation",
+ "namednetworkExceedingSizeErrorDetailText": "Klicka här om du vill ha mer information.",
+ "namednetworkExceedingSizeErrorMessage": "Du har överstigit det högsta tillåtna lagringsutrymmet för namngivna platser. Försök igen med en kortare lista. Klicka här för att se fler alternativ.",
+ "needMfaSecondary": "Alternativet Kräv multifaktorautentisering måste vara valt när Inloggningsfrekvens varje gång väljs med Endast sekundära autentiseringsmetoder",
+ "needMfaSpecificApps": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver beviljandekontrollen Kräv multifaktorautentisering när appar som särskilt stöds har valts",
+ "newCertName": "nytt certifikat",
+ "noAttributePermissionsError": "Du har inte den behörighet som krävs för att skapa eller uppdatera principen. Attributdefinitionsläsarroll krävs för att lägga till/redigera dynamiska filter.",
+ "noPolicyRowMessage": "Inga principer",
+ "noSPSelected": "Inget tjänsthuvudnamn har valts",
+ "noUpdatePermissionMessage": "Du har inte behörigheter att uppdatera de här inställningarna. Be din globala administratör om att få åtkomst.",
+ "noUserSelected": "Ingen användare har valts",
+ "noneRisk": "Ingen risk",
+ "office365Description": "Dessa appar är Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer och andra.",
+ "office365InfoBox": "Minst en av de valda apparna ingår i Office 365. Vi rekommenderar att du konfigurerar principen i Office 365-appen i stället.",
+ "oneUserSelected": "1 användare vald",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Endast globala administratörer kan spara den här policyn.",
+ "or": "{0} ELLER {1}",
+ "pickerDoneCommand": "Klart",
+ "policiesBladeAdPremiumUpsellBannerText": "Skapa dina egna principer och målspecifika villkor som molnappar, inloggningsrisk och enhetsplattformar med Microsoft Entra ID Premium",
+ "policiesBladeTitle": "Principer",
+ "policiesBladeTitleWithAppName": "Principer: {0}",
+ "policiesDisabledBannerText": "Att skapa och redigera principer är inte tillåtet för program med länkade inloggningsattribut.",
+ "policiesHitMaxLimitStatusBarMessage": "Du har nått det maximala antalet principer för den här klientorganisationen. Ta bort några principer innan du skapar fler.",
+ "policyAssignmentsSection": "Tilldelningar",
+ "policyBlockAllInfoBox": "Den konfigurerade principen blockerar alla användare och stöds därmed inte. Granska tilldelningarna och kontrollerna. Exkludera den aktuella användaren {0} om du vill spara den här principen.",
+ "policyCloudAppsDisplayTextAllApp": "Alla appar",
+ "policyCloudAppsLabel": "Molnappar",
+ "policyConditionClientAppDescription": "Programvaran som användaren använder för att komma åt molnappen. Exempelvis webbläsare",
+ "policyConditionClientAppV2Description": "Programvaran som användaren använder för att komma åt molnappen. Exempelvis webbläsare",
+ "policyConditionDevicePlatform": "Enhetsplattformar",
+ "policyConditionDevicePlatformDescription": "Plattformen som användaren loggar in från. Exempelvis iOS",
+ "policyConditionLocation": "Platser",
+ "policyConditionLocationDescription": "Platsen (fastställs av IP-adressintervallet) som användaren loggar in från",
+ "policyConditionLocationPreview": "Platser (förhandsversion)",
+ "policyConditionSigninRisk": "Inloggningsrisk",
+ "policyConditionSigninRiskDescription": "Sannolikhet att inloggningen kommer från någon annan än användaren. Risknivån kan vara hög, medel eller låg. Kräver en Microsoft Entra ID Premium 2-licens.",
+ "policyConditionUserRisk": "Användarrisk",
+ "policyConditionUserRiskDescription": "Konfigurera de användarrisknivåer som krävs för att principen ska tillämpas",
+ "policyConditioniClientApp": "Klientappar",
+ "policyControlAllowAccessDisplayedName": "Bevilja åtkomst",
+ "policyControlAuthenticationStrengthDisplayedName": "Kräv autentiseringsstyrka (förhandsversion)",
+ "policyControlBladeTitle": "Bevilja",
+ "policyControlBlockAccessDisplayedName": "Blockera åtkomst",
+ "policyControlCompliantDeviceDisplayedName": "Kräv att enheten är markerad som kompatibel",
+ "policyControlContentDescription": "Kontrollera framtvingande av åtkomst för att blockera eller bevilja åtkomst.",
+ "policyControlInfoBallonText": "Blockera åtkomst eller välj ytterligare krav som behöver uppfyllas för att tillåta åtkomst",
+ "policyControlMfaChallengeDisplayedName": "Kräv multifaktorautentisering",
+ "policyControlRequireCompliantAppDisplayedName": "Kräv appskyddsprincip",
+ "policyControlRequireDomainJoinedDisplayedName": "Kräv Microsoft Entra-hybridanslutna enhet",
+ "policyControlRequireMamDisplayedName": "Kräv godkänd klientapp",
+ "policyControlRequiredPasswordChangeDisplayedName": "Kräv lösenordsändring",
+ "policyControlSelectAuthStrength": "Kräv autentiseringsstyrka",
+ "policyControlsNoControlsSelected": "0 kontroller valda",
+ "policyControlsSection": "Åtkomstkontroller",
+ "policyCreatBladeTitle": "Ny",
+ "policyCreateButton": "Skapa",
+ "policyCreateFailedMessage": "Fel: {0}",
+ "policyCreateFailedTitle": "Det gick inte att skapa {0}",
+ "policyCreateInProgressTitle": "{0} skapas",
+ "policyCreateSuccessMessage": "{0} har skapats. Principen aktiveras om några minuter om du har gett Aktivera princip värdet På.",
+ "policyCreateSuccessTitle": "{0} har skapats",
+ "policyDeleteConfirmation": "Vill du ta bort {0}? Du kan inte ångra den här åtgärden.",
+ "policyDeleteFailTitle": "Kunde inte ta bort {0}",
+ "policyDeleteInProgressTitle": "Tar bort {0}",
+ "policyDeleteSuccessTitle": "{0} togs bort.",
+ "policyEnforceLabel": "Aktivera princip",
+ "policyErrorCannotSetSigninRisk": "Du har inte behörighet att spara en princip med inloggningsriskvillkor.",
+ "policyErrorNoPermission": "Du har inte behörighet att spara principen. Kontakta din globala administratör.",
+ "policyErrorUnknown": "Något gick fel. Försök igen senare.",
+ "policyFallbackWarningMessage": "Det gick inte att skapa eller uppdatera {0} med MS Graph vilket innebär att AD Graph återställs. Gå igenom följande scenario noggrant eftersom det troligen finns en bugg när principslutpunkten för MS Graph anropas med ett inkompatibelt villkor.",
+ "policyFallbackWarningTitle": "{0} har delvis skapats eller uppdaterats",
+ "policyNameCannotBeEmpty": "Principnamnet kan inte vara tomt",
+ "policyNameDevice": "Enhetspolicy",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Mobilapphanteringspolicy",
+ "policyNameMfaLocation": "Princip för multifaktorautentisering och plats",
+ "policyNamePlaceholderText": "Exempelvis: App-princip för enhetskompatibilitet",
+ "policyNameTooLongError": "Principnamnet är för långt. Max 256 tecken",
+ "policyOff": "Av",
+ "policyOn": "På",
+ "policyReportOnly": "Endast rapport",
+ "policyReviewSection": "Granska",
+ "policySaveButton": "Spara",
+ "policyStatusIconDescription": "Principen har aktiverats",
+ "policyStatusIconEnabled": "Aktiverad statusikon",
+ "policyTemplateName1": "Använd app-framtvingade begräsningar för {0} webbläsaråtkomst",
+ "policyTemplateName2": "Tillåt enbart åtkomst för {0} på hanterade enheter",
+ "policyTemplateName3": "Principen har migrerats från inställningarna för Kontinuerlig tillgänglighetskontroll",
+ "policyTriggerRiskSpecific": "Välj specifik risknivå",
+ "policyTriggersInfoBalloonText": "Villkor som definierar när principen ska tillämpas. Exempelvis plats",
+ "policyTriggersNoConditionsSelected": "0 villkor valda",
+ "policyTriggersSelectorLabel": "Villkor",
+ "policyUpdateFailedMessage": "Fel: {0}",
+ "policyUpdateFailedTitle": "Det gick inte att uppdatera {0}",
+ "policyUpdateInProgressTitle": "Uppdaterar {0}",
+ "policyUpdateSuccessMessage": "{0} har uppdaterats. Principen kommer att aktiveras om några minuter om du har satt \"aktivera princip\" till \"På\".",
+ "policyUpdateSuccessTitle": "{0} har uppdaterats",
+ "primaryCol": "Primär",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "Rapportspecifikt läge: Policyer utvärderas och loggas i samband med inloggningen, men de påverkar inte användarna.",
+ "requireAllControlsText": "Begär alla de valda kontrollerna",
+ "requireCompliantDevice": "Kräv kompatibel enhet",
+ "requireDomainJoined": "Kräver domänansluten enhet",
+ "requireGrantReauth": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver beviljandekontrollen Kräv multifaktorautentisering eller Kräv lösenordsändring när alternativet Alla molnappar har valts",
+ "requireMFA": "Kräv multifaktorautentisering",
+ "requireMfaReauth": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver beviljandekontrollen Kräv multifaktorautentisering för villkoret Inloggningsrisk",
+ "requireOneControlText": "Begär en av de valda kontrollerna",
+ "requirePasswordChangeReauth": "Sessionskontrollen Inloggningsfrekvens varje gång kräver beviljandekontrollen Kräv lösenordsändring för användarrisk.",
+ "requireRiskReauth": "Sessionskontrollen Inloggningsfrekvens varje gång kräver sessionskontrollen Användarrisk eller Inloggningsrisk när Alla molnappar har valts.",
+ "requireRiskReauthRiskNotEnabled": "Sessionskontrollen Inloggningsfrekvens varje gång, är inte tillgänglig när Alla molnappar har valts.",
+ "requireRiskReauthSignInOnly": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver sessionskontrollen Inloggningsrisk när Alla molnappar har valts.",
+ "requireRiskReauthUserOnly": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver sessionskontrollen Användarrisk när Alla molnappar har valts.",
+ "resetFilters": "Återställ filter",
+ "sPRequired": "Tjänstens huvudnamn krävs",
+ "sPSelectorInfoBalloon": "Användare eller tjänstens huvudnamn som du vill testa",
+ "saturday": "lördag",
+ "searchTextTooLongError": "Söktexten är för lång. Den får innehålla högst 256 tecken",
+ "securityDefaultsPolicyName": "Standardinställningar för säkerhet",
+ "securityDefaultsTextMessage": "Du måste inaktivera standardinställningarna för säkerhet för att kunna aktivera principen för villkorsstyrd åtkomst.",
+ "securityDefaultsUpdateInProgressText": "En uppdatering av standardsäkerhetsinställningarna pågår. Vänta en stund och försök igen.",
+ "securityDefaultsWarningMessage": "Det verkar som om du håller på att hantera organisationens säkerhetskonfigurationer. Vad bra! Innan du kan aktivera en princip för villkorsstyrd åtkomst måste du {0}inaktivera standardsäkerhetsinställningarna{1}.",
+ "selectDevicePlatforms": "Välj enhetsplattformar",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Välj platser",
+ "selectedSP": "Valt tjänsthuvudnamn",
+ "servicePrincipalBladeExcludedSelectorTitle": "Välj undantagna tjänsthuvudnamn",
+ "servicePrincipalBladeIncludedSelectorTitle": "Välj tjänsthuvudnamn",
+ "servicePrincipalDataGridAria": "Lista över tillgängliga tjänsthuvudnamn",
+ "servicePrincipalDropDownLabel": "Vad gäller den här principen för?",
+ "servicePrincipalInfoBox": "Vissa villkor är inte tillgängliga på grund av valet {0} i principtilldelning",
+ "servicePrincipalRadioAll": "Alla ägda tjänstens huvudnamn",
+ "servicePrincipalRadioSelect": "Välj tjänsthuvudnamn",
+ "servicePrincipalSelectionsAria": "Valt rutnät för tjänsthuvudnamn",
+ "servicePrincipalSelectorAria": "Lista över valda tjänsthuvudnamn",
+ "servicePrincipalSelectorMultiple": "{0} tjänsthuvudnamn har valts",
+ "servicePrincipalSelectorSingle": "1 tjänsthuvudnamn har valts",
+ "servicePrincipalSpecificExc": "Specifika tjänsthuvudnamn undantas",
+ "servicePrincipalSpecificInc": "Specifika tjänsthuvudnamn ingår",
+ "servicePrincipals": "Tjänsthuvudnamn",
+ "sessionControlBladeTitle": "Session",
+ "sessionControlDescriptionContent": "Kontrollera åtkomsten baserat på sessionskontroller för att möjliggöra begränsade upplevelser i specifika molnprogram.",
+ "sessionControlDisableInfo": "Den här kontrollen fungerar bara med appar som stöds. För närvarande är Office 365, Exchange Online och SharePoint Online de enda molnapparna som stöder appframtvingade begränsningar. Klicka här om du vill läsa mer.",
+ "sessionControlInfoBallonText": "Sessionskontroller aktiverar en begränsad upplevelse inom en molnapp.",
+ "sessionControls": "Sessionskontroller",
+ "sessionControlsAppEnforcedLabel": "Använd app-framtvingade begränsningar",
+ "sessionControlsCasLabel": "Använd Appkontroll för villkorsstyrd åtkomst",
+ "sessionControlsSecureSignInLabel": "Kräv token-bindning",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} inkluderade",
+ "signinRiskReauth": "Villkoret Inloggningsrisk måste väljas när Kräv multifaktorautentisering och sessionskontrollen Inloggningsfrekvens varje gång har valts",
+ "signinRiskTriggerDescriptionContent": "Välj nivå för inloggningsrisk",
+ "singleTenantServicePrincipalInfoBallonText": "Principen gäller endast för tjänstens huvudnamn för enskild klientorganisation som ägs av din organisation. Klicka här om du vill veta mer ",
+ "specificSigninRiskLevelsOption": "Välj specifika risknivåer för inloggning",
+ "specificUsersExcluded": "specifika användare som undantas",
+ "specificUsersIncluded": "Specifika användare som inkluderas",
+ "specificUsersIncludedAndExcluded": "Specifika användare som exkluderats och inkluderats",
+ "startDatePickerLabel": "Startar",
+ "startFreeTrial": "Starta en kostnadsfri utvärdering",
+ "startTimePickerLabel": "Starttid",
+ "sunday": "söndag",
+ "testButton": "What If",
+ "thumbprintCol": "Tumavtryck",
+ "thursday": "torsdag",
+ "timeConditionAllTimesLabel": "När som helst",
+ "timeConditionIntroText": "Konfigurera tiden då den här principen ska gälla",
+ "timeConditionSelectorInfoBallonContent": "När användaren loggar in. Till exempel \"onsdag 09.00-17.00 PST\"",
+ "timeConditionSelectorLabel": "Tid (förhandsversion)",
+ "timeConditionSpecificLabel": "Specifika tider",
+ "timeSelectorAllTimesText": "När som helst",
+ "timeSelectorSpecificTimesText": "Specifika tider konfigurerade",
+ "timeZoneDropdownInfoBalloonContent": "Välj en tidszon som definierar tidsintervallet. Den här principen gäller för alla användare i alla tidszoner. \"Onsdag 09.00-17.00\" för en användare, kan till exempel vara \"onsdag 10.00-18.00\" för en användare i en annan tidszon.",
+ "timeZoneDropdownLabel": "Tidszon",
+ "timeZoneDropdownPlaceholderText": "Välj en tidszon",
+ "tooManyPoliciesDescription": "Bara de 50 första principerna visas, klicka här för att visa alla principer",
+ "tooManyPoliciesTitle": "Fler än 50 principer hittades",
+ "trustedLocationStatusIconDescription": "Platsen är betrodd",
+ "trustedLocationStatusIconEnabled": "Betrodd statusikon",
+ "tuesday": "tisdag",
+ "uploadInBadState": "Det gick inte att ladda upp den angivna filen.",
+ "upsellAppsDescription": "Kräv alltid multifaktorautentisering för känsliga program eller bara från utanför företagsnätverket.",
+ "upsellAppsTitle": "Säkra program",
+ "upsellBannerText": "Skaffa en kostnadsfri Premium-utvärderingsversion om du vill använda den här funktionen",
+ "upsellDataDescription": "Kräv att enheten markeras som kompatibel eller är Microsoft Entra-hybridansluten för att den ska beviljas åtkomst till företagsresurserna.",
+ "upsellDataTitle": "Säkra data",
+ "upsellDescription": "Villkorad åtkomst ger dig den kontroll och det skydd du behöver för att hålla dina företagsdata säkra, samtidigt som den ger dina användare möjligheten att arbeta från valfri enhet. Du kan t.ex. begränsa åtkomsten utanför företagsnätverket eller begränsa åtkomsten till enheter med principer som följer standard.",
+ "upsellRiskDescription": "Kräv multifaktorautentisering för riskhändelser som identifierats av Microsofts maskininlärningssystem.",
+ "upsellRiskTitle": "Skydda mot risk",
+ "upsellTitle": "Villkorad åtkomst",
+ "upsellWhyTitle": "Varför ska man använda villkorsstyrd åtkomst?",
+ "userAppNoneOption": "Ingen",
+ "userNamePlaceholderText": "Ange användarnamn",
+ "userNotSetSeletorLabel": "0 användare och grupper valda",
+ "userOnlySelectionBladeExcludeDescription": "Välj de användare som ska undantas principen",
+ "userOrGroupSelectionCountDiffBannerText": "{0} som konfigurerats i den här policyn har tagits bort från katalogen, men detta påverkar inte andra användare och grupper i policyn. Nästa gång som du uppdaterar policyn tas de borttagna användarna och/eller grupperna automatiskt bort från den.",
+ "userOrSPNotSetSelectorLabel": "Inga användar- eller arbetsbelastningsidentiteter har valts",
+ "userOrSPSelectionBladeTitle": "Användar- eller arbetsbelastningsidentiteter",
+ "userOrSPSelectorInfoBallonText": "Identiteter i katalogen som principen gäller för, inklusive användare, grupper och tjänstens huvudnamn",
+ "userRequired": "Användare krävs",
+ "userRiskErrorBox": "Du måste välja villkoret \"Användarrisk\" när beviljandet \"Tillåt lösenordsändring\" har valts",
+ "userRiskReauth": "Villkoret \"Användarrisk\" och inte \"Inloggningsrisk\" måste väljas när beviljandet \"Kräv lösenordsändring\" och sessionskontrollen \"Inloggningsfrekvens varje gång\" har valts",
+ "userSPRequired": "Användare eller tjänstens huvudnamn måste anges",
+ "userSPSelectorTitle": "Användar- eller arbetsbelastningsidentitet",
+ "userSelectionBladeAllUsersAndGroups": "Alla användare och grupper",
+ "userSelectionBladeExcludeDescription": "Välj de användare och grupper som ska undantas från principen",
+ "userSelectionBladeExcludeTabTitle": "Uteslut",
+ "userSelectionBladeExcludedSelectorTitle": "Välj exkluderade användare och grupper",
+ "userSelectionBladeIncludeDescription": "Välj de användare som principen ska gälla för",
+ "userSelectionBladeIncludeTabTitle": "Inkludera",
+ "userSelectionBladeIncludedSelectorTitle": "Välj",
+ "userSelectionBladeSelectUsers": "Välj användare",
+ "userSelectionBladeSelectedUsers": "Välj användare och grupper",
+ "userSelectionBladeTitle": "Användare och grupper",
+ "userSelectorBladeTitle": "Användare",
+ "userSelectorExcluded": "{0} exkluderade",
+ "userSelectorGroupPlural": "{0} grupper",
+ "userSelectorGroupSingular": "1 grupp",
+ "userSelectorIncluded": "{0} inkluderade",
+ "userSelectorInfoBallonText": "Användare och grupper i katalogen som principen tillämpas för. Exempelvis pilotgrupp",
+ "userSelectorSelected": "{0} har valts",
+ "userSelectorTitle": "Användare",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} användare",
+ "userSelectorUserSingular": "1 användare",
+ "userSelectorWithExclusion": "{0} och {1}",
+ "usersGroupsLabel": "Användare och grupper",
+ "viewApprovedAppsText": "Se lista över godkända klientappar",
+ "viewCompliantAppsText": "Visa en lista över principskyddade klientappar",
+ "viewPolicyInformation": "Visa principinformation",
+ "vpnBladeTitle": "VPN-anslutningsmöjlighet",
+ "vpnCertCreateFailedMessage": "Fel: {0}",
+ "vpnCertCreateFailedTitle": "Det gick inte att skapa {0}",
+ "vpnCertCreateInProgressTitle": "{0} skapas",
+ "vpnCertCreateSuccessMessage": "{0} skapades.",
+ "vpnCertCreateSuccessTitle": "{0} skapades",
+ "vpnCertNoRowsMessage": "Inga VPN-certifikat hittades",
+ "vpnCertUpdateFailedMessage": "Fel: {0}",
+ "vpnCertUpdateFailedTitle": "Det gick inte att uppdatera {0}",
+ "vpnCertUpdateInProgressTitle": "Uppdaterar {0}",
+ "vpnCertUpdateSuccessMessage": "{0} har uppdaterats.",
+ "vpnCertUpdateSuccessTitle": "{0} har uppdaterats",
+ "vpnFeatureInfo": "Klicka här om du vill ha mer information om VPN-anslutningsmöjligheter och villkorsstyrd åtkomst.",
+ "vpnFeatureWarning": "När ett VPN-certifikat har skapats i portalen börjar Microsoft Entra ID använda det omedelbart för att kunna utfärda certifikat med kort livslängd till VPN-klienten. Det är viktigt att VPN-certifikatet omedelbart distribueras till VPN-servern, så att du undviker problem med valideringen av VPN-klientens autentiseringsuppgifter.",
+ "vpnMenuText": "VPN-anslutningsmöjlighet",
+ "vpncertDropdownDefaultOption": "Giltighetstid",
+ "vpncertDropdownInfoBalloonContent": "Välj varaktighet för certifikatet som du vill skapa",
+ "vpncertDropdownLabel": "Välj varaktighet",
+ "vpncertDropdownOneyearOption": "1 år",
+ "vpncertDropdownThreeyearOption": "3 år",
+ "vpncertDropdownTwoyearOption": "2 år",
+ "wednesday": "onsdag",
+ "whatIfCountry": "Land/region",
+ "whatIfCountryInfo": "Landet/regionen som användaren loggar in från.",
+ "whatIfDevicePlatformInfo": "Den enhetsplattform från vilken användaren loggar in.",
+ "whatIfEnterIpAddress": "Ange IP-adress (t.ex. 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "En ogiltig IP-adress angavs.",
+ "whatIfIpAddress": "IP-adress",
+ "whatIfIpAddressInfo": "Den IP-adress användaren in från.",
+ "whatIfIpCountryInfoBoxText": "Om du använder en IP-adress eller land/region måste båda fälten fyllas i och mappas ihop korrekt.",
+ "whatIfSelectCountry": "Välj land/region...",
+ "whatIfSelectDevicePlatform": "Välj enhetsplattform...",
+ "whatIfSelectPrivateLink": "Välj privat länk...",
+ "whatIfSelectSignInRisk": "Välj risknivå för inloggning...",
+ "whatIfSignInRisk": "Inloggningsrisk",
+ "whatIfSignInRiskInfo": "Den risknivå som är kopplad till inloggningen",
+ "whatIfUnknownAreas": "Okända områden",
+ "windows365InfoBox": "Om du väljer Windows 365 påverkas anslutningar till molnbaserade datorer och Azure Virtual Desktop-sessionsvärdar. Klicka här om du vill veta mer.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Arbetsbelastningsidentiteter (förhandsversion)",
+ "workloadIdentitiesLicenseText": "En P1- eller P2-licens för arbetsbelastningsidentiteter krävs för att redigera den här principen.",
+ "workloadIdentity": "Arbetsbelastningsidentitet"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Översikt"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Sök efter enhet, användare eller kvalitetsuppdateringsversion."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Det gick inte att läsa in iOS-programuppdateringsprofiler"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS-uppdateringsprofil",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profil"
+ },
+ "listLoadError": "Det gick inte att läsa in iOS-programuppdateringsprofiler, försök igen senare",
+ "lowercase": "iOS-uppdateringsprincip",
+ "uppercase": "iOS-uppdateringsprincip"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Vi kan tyvärr inte ansluta till Apple för att hämta listan över versioner. Försök igen senare eller fortsätt med den senaste versionen.",
+ "latestUpdate": "Senaste uppdatering",
+ "noLongerSupported": "Den valda versionen stöds inte längre",
+ "olderVersionSelected": "Eftersom du har valt en tidigare version bör du tillämpa en enhetsbegränsningsprincip som skjuter upp visning av programvaruuppdateringar så att enheterna inte kan uppdateras till den senaste versionen.",
+ "prefix": "Installera iOS/iPadOS",
+ "selectSupported": "Välj uppdateringsversion som stöds av Apple",
+ "updateToInstall": "Uppdatering som ska installeras"
+ },
+ "Schedule": {
+ "always": "Uppdatera vid nästa incheckning",
+ "duringTimeWindows": "Uppdatera under schemalagd tid",
+ "header": "När en princip för uppdatering tilldelas en enhet, distribuerar Intune automatiskt de senaste uppdateringarna när enheten checkas in. Du kan istället skapa ett veckoschema med anpassade start- och sluttider. Om du väljer att uppdatera utanför den schemalagda tiden, distribuerar Intune inga uppdateringar förrän den schemalagda tidsperioden är slut.",
+ "infoBalloon": "När uppdateringarna sker. Ytterligare indata krävs för att schemalägga uppdateringar under eller utanför schemalagda tider.",
+ "label": "Schematyp",
+ "outsideActiveHours": "Uppdatera utanför aktiv tid (tidigare)",
+ "outsideTimeWindows": "Uppdatera utanför schemalagd tid",
+ "timeWindow": "Tidsfönster",
+ "timeZone": "Tidszon",
+ "title": "Inställningar för schemaläggning av uppdateringsprincip:",
+ "weekly": "Veckoschema",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "Den version av iOS/iPadOS som ska installeras på enheter vid tiden för uppdatering.",
+ "label": "Välj version som ska installeras"
+ },
+ "header": "Skapa en profil så att de senaste iOS/iPadOS-uppdateringarna automatiskt installeras på tilldelade enheter. Inställningarna anger hur och när programuppdateringar ska distribueras. Den här profilen hindrar inte användare från att uppdatera operativsystemet manuellt, vilket kan förhindras i upp till 90 dagar med en princip för begränsning av enhetskonfiguration. Uppdateringarna tillämpas bara på övervakade enheter.",
+ "notAvailable": "SAKNAS"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Det finns inga iOS-uppdateringsprinciper att visa",
+ "macOsUpdates": "Det finns inga macOS-programuppdateringsprinciper att visa",
+ "windowsUpdates": "Det finns inga uppdateringsringar för Windows 10 och senare att visa."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Enhetsnamn",
+ "deviceUpdateStatus": "Status för enhetsuppdatering",
+ "lastUpdated": "Senast uppdaterad",
+ "osVersion": "Operativsystemsversion",
+ "userPrincipalName": "Användarnamn"
+ },
+ "maximumOSVersionFilter": "Maximal operativsystemsversion",
+ "minimumOSVersionFilter": "Lägsta operativsystemsversion",
+ "noData": "Det finns inga data att visa",
+ "searchBoxPlaceholder": "Sök efter enhetsnamn, användarnamn eller operativsystemversion",
+ "title": "Kontosammanfattning för macOS-enheter"
+ },
+ "Category": {
+ "configurationDataFile": "Konfiguration av datafil",
+ "critical": "Kritiskt",
+ "firmware": "Inbyggd programvara",
+ "other": "Annan"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Senast uppdaterad",
+ "successfulUpdateCount": "Uppdateringar har distribuerats",
+ "totalUpdateCount": "Totalt antal distribuerade uppdateringar",
+ "updateCategory": "Uppdateringskategori",
+ "updateCategoryStatus": "Status för uppdateringskategori"
+ },
+ "noData": "Det finns inga data att visa"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Det gick inte att läsa in macOS-programuppdateringsprofiler"
+ }
+ },
+ "State": {
+ "available": "Tillgänglig",
+ "commandFailed": "Kommandot misslyckades",
+ "downloadFailed": "Hämtningen misslyckades",
+ "downloadInsufficientNetwork": "Otillräckligt med nätverk för nedladdning",
+ "downloadInsufficientPower": "Otillräckligt med ström för nedladdning",
+ "downloadInsufficientSpace": "Otillräckligt med utrymme för nedladdning",
+ "downloaded": "Nedladdat",
+ "downloading": "Hämtar",
+ "idle": "Inaktiv",
+ "installFailed": "Det gick inte att installera",
+ "installInsufficientPower": "Otillräckligt med ström för installation",
+ "installInsufficientSpace": "Otillräckligt med utrymme för installation",
+ "installing": "Installerar",
+ "scheduled": "Schemalagt",
+ "success": "Klart",
+ "unknown": "Okänd"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Senast uppdaterad",
+ "updateName": "Uppdateringens namn",
+ "updateStatus": "Uppdatera status",
+ "version": "Version"
+ },
+ "noData": "Det finns inga data att visa",
+ "searchBoxPlaceholder": "Sök efter uppdateringens namn eller version"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS-uppdateringsprofil",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profil"
+ },
+ "error": "Fel",
+ "errorOrErrors": "Fel",
+ "errors": "Fel",
+ "listLoadError": "Det gick inte att läsa in macOS-programuppdateringsprofiler, försök igen senare",
+ "lowercase": "macOs-uppdateringsprincip",
+ "other": "Annan",
+ "subtitle": "MacOS-programuppdatering",
+ "upToDate": "Uppdaterad",
+ "uppercase": "macOS-uppdateringsprincip"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Försök igen senare",
+ "title": "Det gick inte att ta bort {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Försök igen senare"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Försök igen senare",
+ "title": "Det gick inte att läsa in {0}"
+ },
+ "idWrongFormat": "Profilens id har inte rätt format."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "Välj minst en tidsperiod",
+ "tooMany": "Högst 20 tidsperioder kan ställas in"
+ }
+ },
+ "endDay": "Slutdag",
+ "endTime": "Sluttid",
+ "startDay": "Startdag",
+ "startTime": "Starttid",
+ "timeWindowError": "Välj en tidsperiod som varar minst en timme."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Det gick inte att läsa in uppdateringsringsprofiler för Windows 10 och senare."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Uppdateringsring för Windows 10 och senare",
+ "title": "Windows Update för företag"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 och senare",
+ "title": "Uppdateringsring för Windows 10 och senare"
+ },
+ "listLoadError": "Det gick inte att läsa in uppdateringsringsprofiler för Windows 10 och senare. Försök igen senare",
+ "lowercase": "Uppdateringsring",
+ "uppercase": "Uppdateringsring"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Uppdatera principinställningar",
+ "updateRingSettings": "Uppdateringsringinställningar"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Skapa {0}",
+ "edit": "Redigera {0}"
+ }
+ },
+ "notScannedYet": "Inte genomsökt ännu",
+ "outOfDateIosDevices": "Föråldrade iOS-enheter"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge, version 77 eller senare",
+ "storeApp": "Store-app",
+ "office365Suite": "Microsoft 365-appar",
+ "microsoftDefenderATP": "Microsoft Defender för Endpoint",
+ "other": "Övrigt",
+ "webApplication": "Webbprogram"
+ },
+ "Filters": {
+ "ruleSyntax": "Regelsyntax",
+ "filters": "Filter"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Välj ett identifieringsskript",
+ "scriptFileLabel": "Välj ditt identifieringsskript"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "När det är aktiverat måste enheterna vara kompatibla enligt anpassade regler som definierats i en JSON-fil baserat på anpassade data som returneras från ett PowerShell-skript för identifiering.",
+ "label": "Anpassad efterlevnad erbjuds för närvarande som förhandsversion. När den blir allmänt tillgänglig kan du lägga till den till en extra kostnad för licensalternativen som inkluderar Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Skript",
+ "placeholder": "Klicka för att välja",
+ "searchboxPlaceholder": "Sök efter skriptnamn",
+ "title": "Välj ett identifieringsskript"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Sammanfattning av principer för anpassad regelefterlevnad"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Ladda upp och kontrollera att JSON-filen följer inställningarna för anpassad regelefterlevnad",
+ "noFileSelectedError": "Välj en .json-fil",
+ "parseFileSelectedError": "JSON-filen är ogiltig"
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Konfigurera de PIN-koder och autentiseringsuppgifter som användarna måste ange för att få åtkomst till appar i ett arbetssammanhang."
+ },
+ "DataProtection": {
+ "infoText": "Den här gruppen omfattar kontroller för dataförlustskydd, som begränsningar för klipp ut, kopiera, klistra in och spara som. De här inställningarna fastställer hur användarna samverkar med data i apparna."
+ },
+ "DeviceTypes": {
+ "selectOne": "Markera minst en enhetstyp."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Riktat till appar på alla typer av enheter"
+ },
+ "infoText": "Välj hur du vill tillämpa den här principen på appar på olika enheter. Lägg sedan till minst en app.",
+ "selectOne": "Välj minst en app för att skapa en princip."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender för Endpoint",
+ "androidDeviceOwnerApplications": "Program",
+ "androidDeviceOwnerPolicyMessages": "Anpassad supportinformation",
+ "androidForWorkPassword": "Enhetslösenord",
+ "appManagement": "Tillåt eller blockera appar",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Begränsade appar",
+ "applicationVisibility": "Visa eller dölj appar",
+ "applications": "Appbutik",
+ "applicationsAndGames": "App Store, dokumentvisning, spel",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Appar och användarupplevelse",
+ "associatedDomains": "Tillhörande domäner",
+ "autonomousSingleAppMode": "Autonomt enappsläge",
+ "azureOperationalInsights": "Azure Operational Insights",
+ "bitLocker": "Windows-kryptering",
+ "bootOptions": "Startalternativ",
+ "browser": "Webbläsare",
+ "builtinApps": "Inbyggda appar",
+ "cameras": "Kameror",
+ "cellular": "Mobilnät",
+ "cloudAndStorage": "Moln och lagring",
+ "cloudPrint": "Molnskrivare",
+ "complianceEmailProfile": "E-post",
+ "connectedDevices": "Anslutna enheter",
+ "connectivity": "Mobilnät och anslutning",
+ "contentCaching": "Cachelagring av innehåll",
+ "controlPanelAndSettings": "Kontrollpanel och inställningar",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Anpassad regelefterlevnad",
+ "customConfiguration": "Anpassad konfigurationsprofil",
+ "customOMASettings": "Anpassade OMA-URI-inställningar",
+ "customPreferences": "Prioritetsfil",
+ "dFCISecuritySettings": "Säkerhetsinställningar",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows-brandväggen",
+ "defenderLocalSecurityOptions": "Säkerhetsalternativ för lokal enhet",
+ "defenderSecurityCenter": "Microsoft Defender Säkerhetscenter",
+ "deliveryOptimization": "Leveransoptimering",
+ "derivedCredentialAuthenticationConfiguration": "Härledd autentiseringsuppgift",
+ "deviceExperience": "Enhetsupplevelse",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Microsoft Defender Application Control",
+ "deviceHealth": "Enhetens hälsotillstånd",
+ "devicePassword": "Enhetslösenord",
+ "deviceProperties": "Enhetsegenskaper",
+ "deviceRestrictions": "Allmänt",
+ "deviceSecurity": "Systemsäkerhet",
+ "display": "Visning",
+ "domainJoin": "Domänanslutning",
+ "domains": "Domäner",
+ "edgeBrowser": "Äldre Microsoft Edge (version 45 och tidigare)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge-kioskläge",
+ "editionUpgrade": "Uppgradering av utgåva",
+ "education": "Utbildning",
+ "educationDeviceCerts": "Enhetscertifikat",
+ "educationStudentCerts": "Elevcertifikat",
+ "educationTakeATest": "Gör ett prov",
+ "educationTeacherCerts": "Lärarcertifikat",
+ "emailProfile": "E-post",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Tillägg för enkel inloggning",
+ "filevault": "FileVault",
+ "firewall": "Brandvägg",
+ "games": "Spel",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Hälsoövervakning",
+ "homeScreenLayout": "Hemskärmslayout",
+ "iOSWallpaper": "Skrivbordsunderlägg",
+ "importedPFX": "PKCS-importerat certifikat",
+ "iosDefenderAtp": "Microsoft Defender för Endpoint",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Kerneltillägg",
+ "keyboardAndDictionary": "Tangentbord och ordlista",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Särskilda enheter",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Kiosk-webbläsare",
+ "lockScreenMessage": "Meddelande på låsskärm",
+ "lockedScreenExperience": "Låst skärm",
+ "logging": "Rapportering och telemetri",
+ "loginItems": "Inloggningsalternativ",
+ "loginWindow": "Inloggningsfönster",
+ "macDefenderAtp": "Microsoft Defender för Endpoint",
+ "maintenance": "Underhåll",
+ "malware": "Skadlig kod",
+ "messaging": "Meddelanden",
+ "microphonesAndSpeakers": "Mikrofoner och högtalare",
+ "networkBoundary": "Nätverksgräns",
+ "networkProxy": "Nätverksproxy",
+ "notifications": "Appnotiser",
+ "pKCS": "PKCS-certifikat",
+ "password": "Lösenord",
+ "personalProfile": "Privat profil",
+ "personalization": "Anpassning",
+ "policyOverride": "Åsidosätt grupprincip",
+ "ports": "Portar",
+ "powerSettings": "Energiinställningar",
+ "printer": "Skrivare",
+ "privacy": "Sekretess",
+ "privacyPerApp": "Sekretessundantag per app",
+ "privacyPreferences": "Sekretessinställningar",
+ "projection": "Projektion",
+ "radios": "Radio",
+ "sCCMCompliance": "Configuration Manager-kompatibilitet",
+ "sCEP": "SCEP-certifikat",
+ "sCEPProperties": "SCEP-certifikat",
+ "sMode": "Växla läge (endast Windows Insider)",
+ "safari": "Safari",
+ "search": "Sök",
+ "session": "Session",
+ "sharedDevice": "Delad iPad",
+ "sharedPCAccountManager": "Delad enhet för flera användare",
+ "singleSignOn": "Enkel inloggning",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Inställningar",
+ "start": "Start",
+ "systemExtensions": "Systemtillägg",
+ "systemSecurity": "Systemsäkerhet",
+ "trustedCert": "Betrott certifikat",
+ "uEFIAccess": "UEFI-åtkomst",
+ "updates": "Uppdateringar",
+ "userRights": "Användarrättigheter",
+ "usersAndAccounts": "Användare och konton",
+ "vPN": "Bas-VPN",
+ "vPNApps": "Automatisk VPN",
+ "vPNAppsAndTrafficRules": "Appar och trafikregler",
+ "vPNConditionalAccess": "Villkorlig åtkomst",
+ "vPNConnectivity": "Anslutningar",
+ "vPNDNSTriggers": "DNS-inställningar",
+ "vPNIKEv2": "IKEv2-inställningar",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Delade tunnlar (Split Tunneling)",
+ "vPNTrustedNetwork": "Identifiering av betrott nätverk",
+ "wakeSettings": "Väckningsinställningar",
+ "webContentFilter": "Webbinnehållsfilter",
+ "wiFi": "Trådlöst",
+ "win10Wifi": "Trådlöst",
+ "windowsAtp": "Microsoft Defender för Endpoint",
+ "windowsDefenderATP": "Microsoft Defender för Endpoint",
+ "windowsHelloForBusiness": "Windows Hello för företag",
+ "windowsSpotlight": "Windows Spotlight",
+ "wiredNetwork": "Kabelanslutet nätverk",
+ "wireless": "Trådlöst",
+ "wirelessProjection": "Trådlös projektion",
+ "workProfile": "Arbetsprofilinställningar",
+ "workProfilePassword": "Lösenord för arbetsprofil",
+ "xboxServices": "Xbox-tjänster",
+ "zebraMx": "MX-profil (endast Zebra)",
+ "complianceActionsLabel": "Åtgärder vid inkompatibilitet"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Tillåtna webbadresser",
+ "tooltip": "Ange de webbplatser användarna har tillgång till i ett arbetssammanhang. Inga andra webbplatser tillåts. Du kan välja att ställa in antingen en lista över tillåtna eller blockerade webbplatser, men inte båda. "
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Programproxy",
+ "title": "Proxyomdirigering för program",
+ "tooltip": "Aktivera proxyomdirigering för appar för att ge användarna åtkomst till företagslänkar och lokala webbappar."
+ },
+ "BlockedURLs": {
+ "title": "Blockerade webbadresser",
+ "tooltip": "Ange de webbplatser som är blockerade för användare när de befinner sig i ett arbetssammanhang. Alla andra webbplatser tillåts. Du kan välja att ställa in antingen en lista över tillåtna eller blockerade webbplatser, men inte båda. "
+ },
+ "Bookmarks": {
+ "header": "Hanterade bokmärken",
+ "tooltip": "Ange en lista över bokmärkta webbadresser som är tillgängliga för användarna när de använder Microsoft Edge i ett arbetssammanhang.",
+ "uRL": "URL"
+ },
+ "HomepageURL": {
+ "header": "Hanterad startsida",
+ "title": "Webbadress för genväg till hemsida",
+ "tooltip": "Ställ in en genväg till hemsidan som visas för användarna som första symbol under sökfältet när de öppnar en ny flik i Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Omdirigera ej tillförlitliga webbplatser till privat sammanhang",
+ "tooltip": "Ställ in om användaren ska kunna övergå till sitt privata sammanhang för att öppna ej betrodda webbplatser."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home Sku",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Välj antalet bitar i nyckeln.",
- "keyUsage": "Ange den kryptografiåtgärd som krävs för att byta ut certifikatets offentliga nyckel.",
- "renewalThreshold": "Ange hur många procent (1–99 procent) av den återstående certifikatgiltighetstiden som tillåts innan förnyelse av certifikatet kan begäras. Rekommenderad mängd i Intune är 20 %. (1–99)",
- "rootCert": "Välj en tidigare inställd och tilldelad profil för certifikatutfärdares rotcertifikat. Certifikatutfärdarcertifikatet måste matcha rotcertifikatet för den certifikatutfärdare som utfärdar certifikatet för den här profilen (den du just nu ställer in).",
- "scepServerUrl": "Ange en webbadress för den NDES-server som utfärdar certifikat via SCEP (måste vara HTTPS), till exempel https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Lägg till en eller flera webbadresser för den NDES-server som utfärdar certifikat via SCEP (måste vara HTTPS), till exempel https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Alternativt namn för certifikatmottagare",
- "subjectNameFormat": "Format för namn på certifikatmottagare",
- "validityPeriod": "Tid som återstår innan certifikatet går ut. Ange ett värde som är lika med eller mindre än den giltighetstid som visas i certifikatmallen. Standardvärdet är ett år."
- },
- "appInstallContext": "Anger vilken installationskontext som ska kopplas till appen. För appar i dubbelläge väljer du önskad kontext för appen. För alla andra appar är det här förinställt baserat på paketet, och kan inte ändras.",
- "autoUpdateMode": "Konfigurera appens uppdateringsprioritet. Välj Standard om du vill att enheten ska vara ansluten till WiFi, laddas och inte aktivt användas innan du uppdaterar appen. Välj Hög prioritet om du vill uppdatera appen så snart utvecklaren har publicerat appen, oavsett debiteringsstatus, WiFi-kapacitet eller slutanvändaraktivitet på enheten. Välj Uppskjutet om du vill avstå från appuppdateringar i upp till 90 dagar. Hög prioritet och uppskjuten träder endast i kraft på DO-enheter.",
- "configurationSettingsFormat": "Formattext för konfigurationsinställningar",
- "ignoreVersionDetection": "Ställ in på Ja för appar som uppdateras automatiskt av apputvecklaren (till exempel Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Välj Ja för appar som uppdateras automatiskt av apputvecklaren eller om du bara vill se appens bundleID innan du installerar. Välj Nej om du vill visa appens bundleID och versionsnummer innan du installerar.",
- "installAsManagedMacOSLobApp": "Den här inställningen gäller bara macOS 11 och högre. Appen kommer att installeras men inte hanteras på macOS 10.15 och tidigare.",
- "installContextDropdown": "Välj rätt installationssammanhang. Med användarsammanhang installeras appen enbart för den angivna användaren medan enhetssammanhang installerar appen för alla användare på enheten.",
- "ldapUrl": "Det här är LDAP-värdnamnet där klienter kan få de offentliga krypteringsnycklarna för mejlmottagarna. Mejlen krypteras när en nyckel är tillgänglig. Format som stöds:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Välj körningsbehörigheter för den tillhörande appen.",
- "policyAssociatedApp": "Välj en app som principen ska kopplas till.",
- "policyConfigurationSettings": "Välj den metod som du vill använda för att definiera konfigurationsinställningarna för den här principen.",
- "policyDescription": "Eller ange en beskrivning för konfigurationsprincipen.",
- "policyEnrollmentType": "Välj om de här inställningarna ska hanteras via enhetshantering eller via appar som skapats med Intune SDK.",
- "policyName": "Ange ett namn för den här konfigurationsprincipen.",
- "policyPlatform": "Välj en plattform som ska gälla för den här appkonfigurationsprincipen.",
- "policyProfileType": "Välj de enhetsprofiltyper som den här appkonfigurationsprofilen ska tillämpas på",
- "policySMime": "Ange inställningar för S/MIME-signering och kryptering för Outlook.",
- "sMimeDeployCertsFromIntune": "Ange om S/MIME-certifikat ska levereras från Intune för användning med Outlook.\r\nIntune kan automatiskt distribuera signerings- och krypteringscertifikat till användare via företagsportalen.",
- "sMimeEnable": "Ange om S/MIME-kontroller ska aktiveras när ett mejl skrivs",
- "sMimeEnableAllowChange": "Ange om användaren får ändra Aktivera S/MIME-inställningen.",
- "sMimeEncryptAllEmails": "Ange om alla mejl måste krypteras.\r\nVid kryptering omvandlas data till en chiffertext som bara kan läsas av behöriga mottagare.",
- "sMimeEncryptAllEmailsAllowChange": "Ange om användaren får ändra inställningen Kryptera alla mejl.",
- "sMimeEncryptionCertProfile": "Ange en certifikatprofil för kryptering av e-post.",
- "sMimeSignAllEmails": "Ange om alla mejl måste signeras.\r\nEn digital signatur kontrollerar mejlets äkthet och säkerställer att innehållet inte har manipulerats under överföringen.",
- "sMimeSignAllEmailsAllowChange": "Ange om användaren får ändra inställningen Signera alla mejl.",
- "sMimeSigningCertProfile": "Ange en certifikatprofil för signering av e-post.",
- "sMimeUserNotificationType": "Metod för att meddela användarna om att de måste öppna företagsportalen för att hämta S/MIME-certifikat för Outlook."
- },
+ "Languages": {
+ "ar-aE": "Arabiska (Förenade Arabemiraten)",
+ "ar-bH": "Arabiska (Bahrain)",
+ "ar-dZ": "Arabiska (Algeriet)",
+ "ar-eG": "Arabiska (Egypten)",
+ "ar-iQ": "Arabiska (Irak)",
+ "ar-jO": "Arabiska (Jordanien)",
+ "ar-kW": "Arabiska (Kuwait)",
+ "ar-lB": "Arabiska (Libanon)",
+ "ar-lY": "Arabiska (Libyen)",
+ "ar-mA": "Arabiska (Marocko)",
+ "ar-oM": "Arabiska (Oman)",
+ "ar-qA": "Arabiska (Qatar)",
+ "ar-sA": "Arabiska (Saudiarabien)",
+ "ar-sY": "Arabiska (Syrien)",
+ "ar-tN": "Arabiska (Tunisien)",
+ "ar-yE": "Arabiska (Jemen)",
+ "az-cyrl": "Azerbajdzjanska (kyrillisk, Azerbajdzjan)",
+ "az-latn": "Azerbajdzjanska (latinsk, Azerbajdzjan)",
+ "bn-bD": "Bangla (Bangladesh)",
+ "bn-iN": "Bangla (Indien)",
+ "bs-cyrl": "Bosniska (kyrillisk)",
+ "bs-latn": "Bosniska (latinsk)",
+ "zh-cN": "Kinesiska (Folkrepubliken Kina)",
+ "zh-hK": "Kinesiska (Hongkong SAR)",
+ "zh-mO": "Kinesiska (Macao SAR)",
+ "zh-sG": "Kinesiska (Singapore)",
+ "zh-tW": "Kinesiska (Taiwan)",
+ "hr-bA": "Kroatiska (latinsk)",
+ "hr-hR": "Kroatiska (Kroatien)",
+ "nl-bE": "Nederländska (Belgien)",
+ "nl-nL": "Nederländska (Nederländerna)",
+ "en-aU": "Engelska (Australien)",
+ "en-bZ": "Engelska (Belize)",
+ "en-cA": "Engelska (Kanada)",
+ "en-cabn": "Engelska (Karibien)",
+ "en-iE": "Engelska (Irland)",
+ "en-iN": "Engelska (Indien)",
+ "en-jM": "Engelska (Jamaica)",
+ "en-mY": "Engelska (Malaysia)",
+ "en-nZ": "Engelska (Nya Zeeland)",
+ "en-pH": "Engelska (Filippinerna)",
+ "en-sG": "Engelska (Singapore)",
+ "en-tT": "Engelska (Trinidad och Tobago)",
+ "en-uK": "Engelska (Storbritannien)",
+ "en-uS": "Engelska (USA)",
+ "en-zA": "Engelska (Sydafrika)",
+ "en-zW": "Engelska (Zimbabwe)",
+ "fr-bE": "Franska (Belgien)",
+ "fr-cA": "Franska (Kanada)",
+ "fr-cH": "Franska (Schweiz)",
+ "fr-fR": "Franska (Frankrike)",
+ "fr-lU": "Franska (Luxemburg)",
+ "fr-mC": "Franska (Monaco)",
+ "de-aT": "Tyska (Österrike)",
+ "de-cH": "Tyska (Schweiz)",
+ "de-dE": "Tyska (Tyskland)",
+ "de-lI": "Tyska (Liechtenstein)",
+ "de-lU": "Tyska (Luxemburg)",
+ "iu-cans": "Inuktitut (syllabisk, Kanada)",
+ "iu-latn": "Inuktitut (latinsk, Kanada)",
+ "it-cH": "Italienska (Schweiz)",
+ "it-iT": "Italienska (Italien)",
+ "ms-bN": "Malajiska (Brunei Darussalam)",
+ "ms-mY": "Malajiska (Malaysia)",
+ "mn-cN": "Mongoliska (traditionell mongoliska, Kina)",
+ "mn-mN": "Mongoliska (kyrillisk, Mongoliet)",
+ "no-nB": "Norska, bokmål (Norge)",
+ "no-nn": "Norska, nynorsk (Norge)",
+ "pt-bR": "Portugisiska (Brasilien)",
+ "pt-pT": "Portugisiska (Portugal)",
+ "quz-bO": "Quechua (Bolivia)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Peru)",
+ "smj-nO": "Lulesamiska (Norge)",
+ "smj-sE": "Lulesamiska (Sverige)",
+ "se-fI": "Nordsamiska (Finland)",
+ "se-nO": "Nordsamiska (Norge)",
+ "se-sE": "Nordsamiska (Sverige)",
+ "sma-nO": "Sydsamiska (Norge)",
+ "sma-sE": "Sydsamiska (Sverige)",
+ "smn": "Enaresamiska (Finland)",
+ "sms": "Skoltsamiska (Finland)",
+ "sr-Cyrl-bA": "Serbiska (kyrillisk)",
+ "sr-Cyrl-rS": "Serbiska (kyrillisk, Serbien och Montenegro [f.d.])",
+ "sr-Latn-bA": "Serbiska (latinsk)",
+ "sr-Latn-rS": "Serbiska (latinsk, Serbien)",
+ "dsb": "Lågsorbiska (Tyskland)",
+ "hsb": "Högsorbiska (Tyskland)",
+ "es-es-tradnl": "Spanska (Spanien, traditionell sort)",
+ "es-aR": "Spanska (Argentina)",
+ "es-bO": "Spanska (Bolivia)",
+ "es-cL": "Spanska (Chile)",
+ "es-cO": "Spanska (Colombia)",
+ "es-cR": "Spanska (Costa Rica)",
+ "es-dO": "Spanska (Dominikanska republiken)",
+ "es-eC": "Spanska (Ecuador)",
+ "es-eS": "Spanska (Spanien)",
+ "es-gT": "Spanska (Guatemala)",
+ "es-hN": "Spanska (Honduras)",
+ "es-mX": "Spanska (Mexiko)",
+ "es-nI": "Spanska (Nicaragua)",
+ "es-pA": "Spanska (Panama)",
+ "es-pE": "Spanska (Peru)",
+ "es-pR": "Spanska (Puerto Rico)",
+ "es-pY": "Spanska (Paraguay)",
+ "es-sV": "Spanska (El Salvador)",
+ "es-uS": "Spanska (USA)",
+ "es-uY": "Spanska (Uruguay)",
+ "es-vE": "Spanska (Venezuela)",
+ "sv-fI": "Svenska (Finland)",
+ "uz-cyrl": "Uzbekiska (kyrillisk) (Uzbekistan)",
+ "uz-latn": "Uzbekiska (latinsk) (Uzbekistan)",
+ "af": "Afrikaans (Sydafrika)",
+ "sq": "Albanska (Albanien)",
+ "am": "Amhariska (Etiopien)",
+ "hy": "Armeniska (Armenien)",
+ "as": "Assamesiska (Indien)",
+ "ba": "Basjkiriska (Ryssland)",
+ "eu": "Baskiska (Baskiska)",
+ "be": "Vitryska (Vitryssland)",
+ "br": "Bretonska (Frankrike)",
+ "bg": "Bulgariska (Bulgarien)",
+ "ca": "Katalanska (Katalanska)",
+ "co": "Korsikanska (Frankrike)",
+ "cs": "Tjeckiska (Tjeckien)",
+ "da": "Danska (Danmark)",
+ "dv": "Divehi (Maldiverna)",
+ "et": "Estniska (Estland)",
+ "fo": "Färöiska (Färöarna)",
+ "fil": "Filippinska (Filippinerna)",
+ "fi": "Finska (Finland)",
+ "gl": "Galiciska (Galicien)",
+ "ka": "Georgiska (Georgien)",
+ "el": "Grekiska (Grekland)",
+ "gu": "Gujarati (Indien)",
+ "ha": "Haussa (latinsk, Nigeria)",
+ "he": "Hebreiska (Israel)",
+ "hi": "Hindi (Indien)",
+ "hu": "Ungerska (Ungern)",
+ "is": "Isländska (Island)",
+ "ig": "Ibo (Nigeria)",
+ "id": "Indonesiska (Indonesien)",
+ "ga": "Iriska (Irland)",
+ "xh": "isiXhosa (Sydafrika)",
+ "zu": "isiZulu (Sydafrika)",
+ "ja": "Japanska (Japan)",
+ "kn": "Kannada (Indien)",
+ "kk": "Kazakiska (Kazakstan)",
+ "km": "Kambodjanska (Kambodja)",
+ "rw": "Rwanda (Rwanda)",
+ "sw": "Swahili (Kenya)",
+ "kok": "Konkani (Indien)",
+ "ko": "Koreanska (Korea)",
+ "ky": "Kirgiziska (Kirgizistan)",
+ "lo": "Laotiska (Laos)",
+ "lv": "Lettiska (Lettland)",
+ "lt": "Litauiska (Litauen)",
+ "lb": "Luxemburgiska (Luxemburg)",
+ "mk": "Makedonska (Nordmakedonien)",
+ "ml": "Malayalam (Indien)",
+ "mt": "Maltesiska (Malta)",
+ "mi": "Maori (Nya Zeeland)",
+ "mr": "Marathi (Indien)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepalesiska (Nepal)",
+ "oc": "Occitanska (Frankrike)",
+ "or": "Odia (Indien)",
+ "ps": "Afghanska (Afghanistan)",
+ "fa": "Persiska",
+ "pl": "Polska (Polen)",
+ "pa": "Punjabi (Indien)",
+ "ro": "Rumänska (Rumänien)",
+ "rm": "Rätoromanska (Schweiz)",
+ "ru": "Ryska (Ryssland)",
+ "sa": "Sanskrit (Indien)",
+ "st": "Nordsotho (Sydafrika)",
+ "tn": "Tswana (Sydafrika)",
+ "si": "Singalesiska (Sri Lanka)",
+ "sk": "Slovakiska (Slovakien)",
+ "sl": "Slovenska (Slovenien)",
+ "sv": "Svenska (Sverige)",
+ "syr": "Syriska (Syrien)",
+ "tg": "Tadzjikiska (kyrillisk, Tadzjikistan)",
+ "ta": "Tamil (Indien)",
+ "tt": "Tatariska (Ryssland)",
+ "te": "Telugu (Indien)",
+ "th": "Thailändska (Thailand)",
+ "bo": "Tibetanska (Kina)",
+ "tr": "Turkiska (Turkiet)",
+ "tk": "Turkmeniska (Turkmenistan)",
+ "uk": "Ukrainska (Ukraina)",
+ "ur": "Urdu (Pakistan)",
+ "vi": "Vietnamesiska (Vietnam)",
+ "cy": "Walesiska (Storbritannien)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (Kina)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Inbyggd roll",
+ "customCloudPCRole": "Anpassad Windows 365-roll",
+ "customIntuneRole": "Anpassad Intune-roll",
+ "customRole": "Anpassad roll"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "Appversion",
+ "dependencyName": "Namn på beroende",
+ "lastModifiedTime": "Tid för senaste ändring",
+ "relationship": "Relation",
+ "replaced": "Ersatt",
+ "searchPlaceholder": "Filtrera efter appnamn",
+ "status": "Statusinformation",
+ "statusDetails": "Status",
+ "supersedenceName": "Namn för ersättande"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Underordnat beroende",
+ "indirectSupersedence": "Inte direkt relaterad",
+ "supersedenceAncestors": "Ersättande pågår",
+ "supersedenceDescendants": "Ersatt av ett nytt"
+ },
+ "SupersededReplaced": {
+ "no": "Nej",
+ "yes": "Ja"
+ },
+ "Tabs": {
+ "chart": "Diagram",
+ "dependency": "Beroende",
+ "label": "Visa: ",
+ "supersedence": "Ersättande",
+ "table": "Tabell"
+ },
+ "dependencyGraphAriaLabel": "Diagram över appsamband",
+ "supersedenceGraphAriaLabel": "Diagram över ersättande app"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Antal dagar att vänta innan omstart framtvingas"
+ },
+ "Description": {
+ "label": "Beskrivning"
+ },
+ "Name": {
+ "label": "Namn"
+ },
+ "QualityUpdateRelease": {
+ "label": "Skicka ut installation av kvalitetsuppdateringar om enhetens operativsystemversion är under:"
+ },
+ "bladeTitle": "Kvalitetsuppdateringar Windows 10 och senare (förhandsversion)",
+ "loadError": "Det gick inte att läsa in!"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Inställningar"
+ },
+ "infoBoxText": "Den enda kontrollen av kvalitetsuppdateringar som just nu är tillgänglig förutom den befintliga principen för uppdateringsringar för Windows 10 och senare är möjligheten att skicka kvalitetsuppdateringar för enheter som hamnat under en angiven korrigeringsnivå. Det kommer att finnas fler kontroller i framtiden.",
+ "licenseLearnMoreText": "Läs mer om krav och principer för kvalitetsuppdatering.",
+ "licenseWarningBoxText": "För att skapa principer för kvalitetsuppdatering krävs specifik licensiering.",
+ "warningBoxText": "Utskick av programuppdateringar kan visserligen förkorta tiden till regelefterlevnad men påverkar också användarnas produktivitet. Risken för att användarna måste starta om datorn under arbetstid ökar markant."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "På Android kan du tillåta fingeravtrycksidentifiering istället för en PIN-kod. Användare ombeds att lämna sitt fingeravtryck när de ska komma åt den här appen från sina arbetskonton.",
+ "iOS": "På iOS-/iPadOS-enheter kan du tillåta fingeravtrycksidentifiering istället för PIN-kod. Användarna uppmanas att använda fingeravtryck när de öppnar appen via arbetskontot.",
+ "mac": "På Mac-enheter kan du tillåta fingeravtrycksidentifiering istället för PIN-kod. Användarna uppmanas att använda fingeravtryck när de öppnar appen via arbetskontot."
+ },
+ "allowWidgetContentSync": "Välj Blockera om du vill förhindra att principhanterade appar sparar data till appwidgetar. Om du väljer Tillåt kan den principhanterade appen spara data i appwidgetar, om dessa funktioner stöds och aktiveras i den principhanterade appen. \r\n\r\n \r\n\r\nAppar kan ge ytterligare konfigurationsfunktioner med konfigurationsprinciper för appar. Mer information finns i appens dokumentation.",
+ "appSharingFromLevel1": "Välj något av de följande alternativen för att ange de appar som den här appen kan ta emot data från:",
+ "appSharingFromLevel2": "{0}: Tillåt endast mottagning av data i organisationsdokument eller konton från andra principhanterade appar",
+ "appSharingFromLevel3": "{0}: Tillåt mottagning av data i organisationsdokument eller konton från valfri app",
+ "appSharingFromLevel4": "{0}: Tillåt inte mottagning av data i organisationsdokument eller konton från någon app",
+ "appSharingFromLevel5": "{0}: Tillåt dataöverföring från alla appar och behandla alla inkommande data utan användaridentitet som organisationsdata.",
+ "appSharingToLevel1": "Välj något av de följande alternativen för att ange de appar som den här appen kan ta skicka data till:",
+ "appSharingToLevel2": "{0}: Tillåt endast sändning av organisationsdata till andra principhanterade appar",
+ "appSharingToLevel3": "{0}: Tillåt sändning av organisationsdata till valfri app",
+ "appSharingToLevel4": "{0}: Tillåt inte sändning av organisationsdata till någon app",
+ "appSharingToLevel5": "{0}: Tillåt bara överföring till andra principhanterade appar och filöverföring till andra mobilenhetshanterade appar på registrerade enheter",
+ "appSharingToLevel6": "{0}: Tillåt bara överföring till andra principhanterade appar och filtrera operativsystem i dialogrutor Öppna i/Dela till att bara visa principhanterade appar",
+ "assignmentFilterEdit1": "Om du tillämpar tilldelningsfilter på den här principen tillämpas egenskapen Enhetshantering Type utöver de värden som har angetts för Rikta till appar på alla enhetstyper och Enhetstyper på sidan Appar.",
+ "assignmentFilterEdit2": "Läs mer om att tilldela appskyddsprinciper.",
+ "conditionalEncryption1": "Välj {0} om du vill inaktivera appkryptering för intern applagring när enhetskryptering har upptäckts på en registrerad enhet.",
+ "conditionalEncryption2": "Obs! Intune kan bara identifiera enhetsregistrering med Intune MDM. Extern applagring krypteras fortfarande för att säkerställa att data inte kan nås av ohanterade program.",
+ "contactSyncMac": "Om det är inaktiverat kan inte appar spara kontakter i den interna adressboken.",
+ "contactsSync": "Välj Blockera för att förhindra att principhanterade appar sparar data i enhetens inbyggda appar (t.ex. kontakter, kalender och widgetar) eller för att förhindra att tillägg används i de principhanterade apparna. Om du väljer Tillåt kan den principhanterade appen spara data i de interna apparna eller använda tillägg, om dessa funktioner stöds och aktiveras i den principhanterade appen.
Appar kan ge ytterligare konfigurationsfunktioner med appkonfigurationsprinciper. Mer information finns i appens dokumentation.",
+ "deviceTypeTargetingCreate1": "Enhetstypens mål har flyttats till steget Tilldelningar när principen skapades.",
+ "deviceTypeTargetingEdit1": "Om du tillämpar tilldelningsfilter på den här principen tillämpas egenskapen Enhetshantering Type utöver de värden som har angetts för Rikta till appar på alla enhetstyper och Enhetstyper på sidan Appar.",
+ "deviceTypeTargetingEdit2": "Om du vill redigera måltypen för enhetshantering återställer du Rikta till appar på alla enhetstyper = Ja. Skapa sedan ett MAM-tilldelningsfilter med önskade värden för Enhetshantering typ.",
+ "deviceTypeTargetingHasMoved": "Läs mer om att tilldela appskyddsprinciper",
+ "encryptionAndroid1": "För appar som omfattas av en princip för Intune-mobilprogramhantering tillhandahålls kryptering av Microsoft. Data krypteras synkront under I/O-åtgärder enligt inställningen i hanteringsprincipen för mobila program. Hanterade appar på Android använder AES-128-kryptering i CBC-läge med hjälp av plattformens kryptografibibliotek. Krypteringsmetoden är inte FIPS 140-2-kompatibel. SHA-256-kryptering stöds som explicit instruktion med SigAlg-parametern och fungerar bara på 4.2-enheter och senare. Innehåll på enhetslagringen krypteras alltid.",
+ "encryptionAndroid2": "När du kräver kryptering i din apprincip måste slutanvändarna konfigurera och använda PIN-koder för att få åtkomst till sina enheter. Om någon PIN-kod inte har konfigurerats för enhetsåtkomst startar inte apparna, utan istället visas ett meddelande för slutanvändaren som säger: \\\"Ditt företag kräver att du först aktiverar en PIN-kod för enheten för att få åtkomst till det här programmet.\\\"",
+ "encryptionMac1": "För appar som omfattas av en princip för Intune-mobilprogramhantering tillhandahålls kryptering av Microsoft. Data krypteras synkront under I/O-åtgärder enligt inställningen i hanteringsprincipen för mobila program. Hanterade appar på Mac använder AES-128-kryptering i CBC-läge med hjälp av plattformskryptografibibliotek. Krypteringsmetoden är inte FIPS 140-2-kompatibel. SHA-256-kryptering stöds som explicit instruktion med SigAlg-parametern och fungerar bara på 4.2-enheter och senare. Innehåll på enhetslagringen krypteras alltid.",
+ "faceId1": "När det är tillämpligt kan du tillåta att ansiktsidentifiering används istället för PIN-kod. Användare uppmanas då att använda ansiktsidentifiering när de ansluter till den här appen med sina arbetskonton.",
+ "faceId2": "Välj Ja om du vill tillåta ansiktsidentifiering istället för PIN-kod för appåtkomst.",
+ "managementLevelsAndroid1": "Använd det här alternativet för att ange huruvida principen avser Android-enhetsadministratörsenheter, Android Enterprise-enheter eller ohanterade enheter.",
+ "managementLevelsAndroid2": "{0}: Ohanterade enheter är enheter där ingen Intune-mobilenhetshantering har identifierats. Det omfattar även mobilenhetshanteringsleverantörer från tredje part.",
+ "managementLevelsAndroid3": "{0}: Intune-hanterade enheter som använder Androids enhetsadministrations-API.",
+ "managementLevelsAndroid4": "{0}: Intune-hanterade enheter som använder Android Enterprise-arbetsprofiler eller Android Enterprise fullständig enhetshantering.",
+ "managementLevelsIos1": "Använd det här alternativet för att ange om principen avser enheter hanterade via mobilenhetshantering (MDM) eller ohanterade enheter.",
+ "managementLevelsIos2": "{0}: Ohanterade enheter är enheter där ingen Intune-mobilenhetshantering har identifierats. Det omfattar även mobilenhetshanteringsleverantörer från tredje part.",
+ "managementLevelsIos3": "{0}: Hanterade enheter hanteras av Intune-mobilenhetshantering.",
+ "minAppVersion": "Ange det lägsta appversionsnumret som en användare måste ha för att få säker åtkomst till appen.",
+ "minAppVersionWarning": "Ange det rekommenderade lägsta appversionsnumret som en användare måste ha för säker åtkomst till appen.",
+ "minOsVersion": "Ange den lägsta operativsystemsversionen som en användare måste ha för att få säker åtkomst till appen.",
+ "minOsVersionWarning": "Ange den rekommenderade lägsta operativsystemsversionen som en användare måste ha för att få säker åtkomst till appen.",
+ "minPatchVersion": "Definiera den äldsta Android-säkerhetsuppdateringsnivån som krävs för att en användare ska ha säker åtkomst till appen.",
+ "minPatchVersionWarning": "Definiera den äldsta rekommenderade Android-säkerhetsuppdateringsnivån som en användare kan ha för att få säker åtkomst till appen.",
+ "minSdkVersion": "Ange den lägsta versionen av SDK för Intune-programmets skyddsprincip som en användare måste ha för att få säker åtkomst till appen.",
+ "requireAppPinDefault": "
Välj Ja om du vill inaktivera appens PIN-kod när ett enhetslås upptäcks på en registrerad enhet.
",
+ "targetAllApps1": "Använd det här alternativet om principen ska avse appar på enheter i valfritt hanteringsläge.",
+ "targetAllApps2": "Den här inställningen ersätts vid en principkonflikt om användaren har angett en princip avsedd för ett särskilt hanteringsläge.",
+ "touchId2": "Välj {0} om du vill kräva identifiering med fingeravtryck istället för PIN-kod för appåtkomst."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Ange efter hur många dagar användaren måste återställa PIN-koden.",
+ "previousPinBlockCount": "Här visas antalet tidigare PIN-koder som sparas i Intune. Eventuellt nya PIN-koder får inte vara desamma som de koder som sparas i Intune."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Det här gör att Windows Search kan fortsätta söka igenom krypterade data.",
+ "authoritativeIpRanges": "Aktivera den här inställningen om du vill åsidosätta Windows automatiska identifiering av IP-intervall.",
+ "authoritativeProxyServers": "Aktivera den här inställningen om du vill åsidosätta Windows automatiska identifiering av proxyservrar.",
+ "checkInput": "Kontrollera inmatningens giltighet",
+ "dataRecoveryCert": "Ett återställningscertifikat är ett speciellt EFS-certifikat (krypterande filsystem) som du kan använda för att återställa krypterade filer om du skulle tappa bort eller skada krypteringsnyckeln. Du måste skapa återställningscertifikatet och ange det här. Mer information hittar du här",
+ "enterpriseCloudResources": "
Ange molnresurser som ska betraktas som företagsresurser och skyddas av Windows informationsskyddsprincip. Du kan ange flera resurser genom att ange ett |-tecken mellan varje.
Om du har ställt in en proxyserver i företaget kan du ange den proxyserver genom vilken trafik till de angivna molnresurserna ska dirigeras.
webbadress[,proxy]|webbadress[,proxy]
Utan proxy: contoso.sharepoint.com|contoso.visualstudio.com Med proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Ange de IPv4-intervall som utgör ditt företagsnätverk. De används tillsammans med företagsnätverkets domännamn som du anger för att definiera nätverkets gräns.
Windows informationsskydd måste vara aktiverat för att den här inställningen ska gälla.
Du kan ange flera värden genom att ange ett kommatecken mellan varje.
Till exempel: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
+ "enterpriseIPv6Ranges": "
Ange de IPv6-intervall som utgör ditt företagsnätverk. De används tillsammans med företagsnätverkets domännamn som du anger för att definiera nätverkets gräns.
Du kan ange flera värden genom att ange ett kommatecken mellan varje.
Till exempel: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
+ "enterpriseInternalProxyServers": "
Om du har ställt in en proxyserver i företaget kan du ange den proxyserver genom vilken trafik till de angivna molnresurserna i inställningarna för företagsmolnresurser ska dirigeras.
Du kan ange flera värden genom att ange ett semikolon mellan varje.
Till exempel: contoso.internalproxy1.com;contoso.internalproxy2.com
",
+ "enterpriseNetworkDomainNames": "
Ange de DNS-namn som utgör ditt företagsnätverk. De används tillsammans med de IP-intervall som du anger för att definiera företagsnätverkets gräns. Du kan ange flera värden genom att ange ett kommatecken mellan varje.
Windows informationsskydd måste vara aktiverat för att den här inställningen ska gälla.
Till exempel: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Ange de DNS-namn som utgör ditt företagsnätverk. De används tillsammans med de IP-intervall som du anger för att definiera företagsnätverkets gräns. Du kan ange flera värden genom att ange ett lodrätt streck, \\\"|\\\", mellan varje.
Windows informationsskydd måste vara aktiverat för att den här inställningen ska gälla.
Till exempel: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
Om du har externt riktade proxyservrar i företagsnätverket anger du dem här. När du anger en proxyserveradress bör du också ange genom vilken port trafik ska tillåtas och skyddas via Windows informationsskydd.
Obs! Listan får inte innehålla servrar från listan över företagets interna proxyservrar. Du kan ange flera värden genom att ange ett semikolon mellan varje.
Till exempel: proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "Anger hur lång tid som får passera (i minuter) innan en inaktiv enhet låses med PIN-kod eller lösenord. Användarna kan välja en befintlig tidsgräns som är lägre än den angivna maxtiden i Inställningar. Tänk på att Lumia 950 och 950XL har en högsta tidsgräns på 5 minuter, oavsett vilket värde som anges i den här principen.",
+ "maxInactivityTime2": "0 (standardvärde) – Ingen tidsgräns anges. Standardvärdet 0 tolkas som Ingen tidsgräns anges.",
+ "maxPasswordAttempts1": "Den här principen fungerar på olika sätt på mobila enheter och skrivbordsenheter.",
+ "maxPasswordAttempts2": "På en mobil enhet rensas enheten när användaren når det värde som har angetts i principen.",
+ "maxPasswordAttempts3": "På en skrivbordsenhet rensas inte enheten när användaren når värdet i principen. I stället försätts enheten i BitLocker-återställningsläge vilket gör att data inte kan nås, men de kan återställas. Om BitLocker inte är aktiverat kan principen inte tillämpas.",
+ "maxPasswordAttempts4": "Innan gränsen för antal misslyckade försök nås, skickas användaren till låsskärmen och varnas om att fler försök kommer att låsa datorn. När gränsen nås startar enheten automatiskt om och BitLocker-återställningssidan öppnas. Användaren uppmanas där att ange BitLocker-återställningsnyckeln.",
+ "maxPasswordAttempts5": "0 (standardvärde) – Enheten rensas aldrig när en felaktig PIN-kod eller ett felaktigt lösenord har angetts.",
+ "maxPasswordAttempts6": "Det säkraste värdet är 0 om alla principvärden = 0. I annat fall är principvärdet Min det säkraste värdet.",
+ "mdmDiscoveryUrl": "Ange webbadressen till registreringsslutpunkten för mobilenhetshantering som ska anges av de användare som registrerar sig för mobilenhetshantering. Det anges som standard för Intune.",
+ "minimumPinLength1": "Heltal som anger minsta antal tecken som krävs för PIN-koden. Standardvärdet är 4. Du kan ange lägst 4. Det högsta värdet du kan ange måste vara mindre än värdet för Maximal PIN-längd i principen eller 127, beroende på vilket som är lägst.",
+ "minimumPinLength2": "Om du konfigurerar den här principinställningen måste PIN-längden vara större än eller lika med det här värdet. Om du inaktiverar eller inte konfigurerar den här principinställningen måste PIN-längden vara större än eller lika med 4.",
+ "name": "Namnet på den här nätverksgränsen",
+ "neutralResources": "
Om du har autentiseringsslutpunkter för omdirigering i företaget anger du dem här. De platser som anges här betraktas antingen som personliga eller företagsplatser beroende på kontext och anslutning före omdirigeringen.
Du kan ange flera värden genom att ange ett kommatecken mellan varje.
Till exempel: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Värde som anger Windows Hello för företag som inloggningsmetod i Windows.",
+ "passportForWork2": "Standardvärdet är sant. Om du ställer in värdet på falskt kan användaren inte installera Windows Hello för företag förutom på Microsoft Entra-anslutna mobiltelefoner där installation krävs.",
+ "pinExpiration": "Det högsta talet du kan ange för den här principinställningen är 730. Det lägsta är 0. Om du anger 0 upphör användarens PIN-kod aldrig att gälla.",
+ "pinHistory1": "Det högsta talet du kan ange för den här principinställningen är 50. Det lägsta är 0. Om du anger 0 krävs ingen lagring av tidigare PIN-koder.",
+ "pinHistory2": "Den aktuella PIN-koden ingår i den grupp PIN-koder som hör till användarkontot. PIN-kodshistoriken sparas inte under en PIN-kodsåterställning.",
+ "protectUnderLock": "Skyddar appinnehåll när enheten är låst.",
+ "protectionModeBlock": "
Blockera: Blockerar företagsdata från att lämna skyddade appar.
",
+ "protectionModeOff": "
Av: Användaren kan fritt flytta data från skyddade appar. Inga åtgärder loggas.
",
+ "protectionModeOverride": "
Tillåt åsidosättningar: Användarna får en fråga när de försöker flytta data från en skyddad app till en oskyddad app. Om användaren väljer att åsidosätta frågan loggas åtgärden.
",
+ "protectionModeSilent": "
Tyst: Användaren kan fritt flytta data från skyddade appar. De här åtgärderna loggas.
",
+ "required": "Obligatorisk",
+ "revokeOnMdmHandoff": "Tillagt i Windows 10, version 1703. Den här principen styr om nycklar för Windows informationstjänst ska återkallas när en enhet uppgraderas från MAM till MDM. Om det är inställt på Av återkallas inte nycklarna och användaren har fortsatt åtkomst till skyddade filer efter uppgraderingen. Det här rekommenderas om MDM-tjänsten är inställd med samma EnterpriseID för Windows informationsskydd som MAM-tjänsten.",
+ "revokeOnUnenroll": "Det här gör att krypteringsnycklarna återkallas när en enhet avregistreras från den här principen.",
+ "rmsTemplateForEdp": "GUID för TemplateID som ska användas för RMS-kryptering. Med hjälp av Azure RMS-mallen kan IT-administratören ange information om vem som har åtkomst till RMS-skyddade filer och hur länge de har åtkomst.",
+ "showWipIcon": "Det här gör att en symbol visas för användarna så att de vet att de befinner sig i ett företagssammanhang.",
+ "useRmsForWip": "Anger om Azure RMS-kryptering ska tillåtas för Windows informationsskydd."
+ },
+ "requireAppPin": "
Välj Ja om du vill inaktivera appens PIN-kod när ett enhetslås upptäcks på en registrerad enhet.
Obs! Intune kan inte identifiera enhetsregistrering med en EMM-lösning från tredje part i iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Skapa anpassat skript",
+ "edit": "Redigera anpassat skript"
+ },
+ "basicInfo": "Skapa ett nytt anpassat skriptpaket av de identifierings- och reparationsskript du har skrivit.",
+ "customScriptCapitalized": "Anpassat skript",
+ "customScriptLowercase": "anpassat skript",
+ "detectionScript": "Identifieringsskript"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Standardinställning",
+ "header": "Uppdateringsprioritet",
+ "postponed": "Uppskjuten",
+ "priority": "Hög prioritet"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Automatisk uppdatering",
+ "sublabel": "Om ersatta appar har installerats av användaren från Företagsportal måste du kräva att den ersatta appen installeras."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Bakgrund",
+ "displayText": "Innehållsnedladdning i {0}",
+ "foreground": "Foreground",
+ "header": "Prioritet för leveransoptimering"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Tillåt användaren att snooza omstartsmeddelande",
+ "countdownDialog": "Välj när dialogrutan för nedräkning till omstart ska visas innan omstart sker (minuter)",
+ "durationInMinutes": "Respitperiod för omstart av enhet (minuter)",
+ "snoozeDurationInMinutes": "Välj snooze-tid (minuter)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Tidszon",
+ "local": "Enhetens tidszon",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Datum och tid",
+ "deadlineTimeColumnLabel": "Tidsgräns för installation",
+ "deadlineTimeDatePickerErrorMessage": "Det valda datumet måste infalla efter det tillgängliga datumet",
+ "deadlineTimeLabel": "Tidsgräns för appinstallation",
+ "defaultTime": "Så snart som möjligt",
+ "infoText": "Det här programmet blir tillgängligt så fort det har distribuerats, såvida du inte anger en tillgänglighetstid nedan. Om det är ett nödvändigt program kan du ange en tidsgräns för installationen.",
+ "specificTime": "Ett visst datum och tid",
+ "startTimeColumnLabel": "Tillgänglighet",
+ "startTimeDatePickerErrorMessage": "Det valda datumet måste infalla före tidsgränsdatumet",
+ "startTimeLabel": "Apptillgänglighet"
+ },
+ "restartGracePeriodHeader": "Respitperiod för omstart",
+ "restartGracePeriodLabel": "Respitperiod för omstart av enhet",
+ "summaryTitle": "Slutanvändarupplevelse"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Tilldela minst en grupp ett anpassat attribut. Gå till Egenskaper för att redigera tilldelningar.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Shell-skript",
"successfullySavedPolicy": "Sparade {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64-bitars",
+ "thirtyTwoBit": "32-bitars"
+ },
+ "Countries": {
+ "ae": "Förenade Arabemiraten",
+ "ag": "Antigua och Barbuda",
+ "ai": "Anguilla",
+ "al": "Albanien",
+ "am": "Armenien",
+ "ao": "Angola",
+ "ar": "Argentina",
+ "at": "Österrike",
+ "au": "Australien",
+ "az": "Azerbajdzjan",
+ "bb": "Barbados",
+ "be": "Belgien",
+ "bf": "Burkina Faso",
+ "bg": "Bulgarien",
+ "bh": "Bahrain",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolivia",
+ "br": "Brasilien",
+ "bs": "Bahamas",
+ "bt": "Bhutan",
+ "bw": "Botswana",
+ "by": "Vitryssland",
+ "bz": "Belize",
+ "ca": "Kanada",
+ "cg": "Republiken Kongo",
+ "ch": "Schweiz",
+ "cl": "Chile",
+ "cn": "Kina",
+ "co": "Colombia",
+ "cr": "Costa Rica",
+ "cv": "Cabo Verde",
+ "cy": "Cypern",
+ "cz": "Tjeckien",
+ "de": "Tyskland",
+ "dk": "Danmark",
+ "dm": "Dominica",
+ "do": "Dominikanska republiken",
+ "dz": "Algeriet",
+ "ec": "Ecuador",
+ "ee": "Estland",
+ "eg": "Egypten",
+ "es": "Spanien",
+ "fi": "Finland",
+ "fj": "Fiji",
+ "fm": "Mikronesiska federationen",
+ "fr": "Frankrike",
+ "gb": "Storbritannien",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Grekland",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hongkong",
+ "hn": "Honduras",
+ "hr": "Kroatien",
+ "hu": "Ungern",
+ "id": "Indonesien",
+ "ie": "Irland",
+ "il": "Israel",
+ "in": "Indien",
+ "is": "Island",
+ "it": "Italien",
+ "jm": "Jamaica",
+ "jo": "Jordanien",
+ "jp": "Japan",
+ "ke": "Kenya",
+ "kg": "Kirgizistan",
+ "kh": "Kambodja",
+ "kn": "Saint Kitts och Nevis",
+ "kr": "Republiken Korea",
+ "kw": "Kuwait",
+ "ky": "Caymanöarna",
+ "kz": "Kazakstan",
+ "la": "Demokratiska folkrepubliken Laos",
+ "lb": "Libanon",
+ "lc": "Saint Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Litauen",
+ "lu": "Luxemburg",
+ "lv": "Lettland",
+ "md": "Republiken Moldavien",
+ "mg": "Madagaskar",
+ "mk": "Nordmakedonien",
+ "ml": "Mali",
+ "mn": "Mongoliet",
+ "mo": "Macao",
+ "mr": "Mauretanien",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Mexiko",
+ "my": "Malaysia",
+ "mz": "Moçambique",
+ "na": "Namibia",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Nederländerna",
+ "no": "Norge",
+ "np": "Nepal",
+ "nz": "Nya Zeeland",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua Nya Guinea",
+ "ph": "Filippinerna",
+ "pk": "Pakistan",
+ "pl": "Polen",
+ "pt": "Portugal",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Rumänien",
+ "ru": "Ryssland",
+ "sa": "Saudiarabien",
+ "sb": "Solomonöarna",
+ "sc": "Seychellerna",
+ "se": "Sverige",
+ "sg": "Singapore",
+ "si": "Slovenien",
+ "sk": "Slovakien",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Surinam",
+ "st": "São Tomé och Príncipe",
+ "sv": "El Salvador",
+ "sz": "Swaziland",
+ "tc": "Turks- och Caicosöarna",
+ "td": "Tchad",
+ "th": "Thailand",
+ "tj": "Tadzjikistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunisien",
+ "tr": "Turkiet",
+ "tt": "Trinidad och Tobago",
+ "tw": "Taiwan",
+ "tz": "Tanzania",
+ "ua": "Ukraina",
+ "ug": "Uganda",
+ "us": "USA",
+ "uy": "Uruguay",
+ "uz": "Uzbekistan",
+ "vc": "Saint Vincent och Grenadinerna",
+ "ve": "Venezuela",
+ "vg": "Brittiska Jungfruöarna",
+ "vn": "Vietnam",
+ "ye": "Jemen",
+ "za": "Sydafrika",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Den här inställningen kan inte konfigureras via OMA-URI eftersom den är tillgänglig i inställningskatalogen. Gå till inställningskatalogen för att konfigurera den här inställningen."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Välj en konfigurationsprofilfil"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "De här inställningarna fungerar för enheter som har registrerats med eller utan användargodkännande via enhetsregistrering, och för enheter som har registrerats med automatisk enhetsregistrering (tidigare DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Enhetsregistrering och automatisk enhetsregistrering",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Enhetsregistrering och automatisk enhetsregistrering",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Ställ in Microsoft Launcher på dina fullständigt hanterade enheter.",
+ "deviceExperienceTypeDescription": "Välj helskärmsläge eller Microsoft Launcher för att börja konfigurera upplevelsen på dina enheter baserat på den upplevelse du vill konfigurera. Om du inte väljer en typ av enhetsupplevelse ser användarna enhetens standardupplevelse på startskärmen.",
+ "deviceExperienceTypeKioskMode": "Helskärmsläge (dedikerat och fullständigt hanterat)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Använd Microsoft Launcher för att anpassa hemskärmsupplevelsen på organisationens hanterade enheter. Om du gör Launcher till standardstartprogram kan användarna inte använda något annat startprogram.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Gör Microsoft Launcher till standardstartprogram",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (endast fullständigt hanterad)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Användarna kan inte ändra bakgrundsbild såvida du inte tillåter det. Den här inställningen är bara tillgänglig om du ställer in en anpassad bakgrundsbild.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Tillåt användarna att ändra bakgrundsbild",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Gör att du kan använda en egen bild som bakgrundsbild på startskärmen och välja om användaren kan ändra det. Om du inte ställer in en anpassad bakgrundsbild behålls den nuvarande bakgrundsbilden.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Ställ in anpassad bakgrundsbild",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Den här bilden visas som bakgrundsbild på enhetens startskärm. Fältet är bara tillgängligt om du ställer in en anpassad bakgrundsbild.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Ange bakgrundsbildens webbadress",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Inaktiverat",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Dölj",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Visa",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Om du låter användaren ändra förekomsten av dockan, tillämpas den föregående inställningen för den första distributionen. Därefter tillämpas inte inställningen för att respektera eventuella ändringar som användaren har gjort. Den här inställningen är bara tillgänglig om du ställer in förekomst av dockan.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Tillåt användaren att ändra förekomst av docka",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Dockan är en meny som ger användarenheterna snabbåtkomst till sina appar och verktyg. När den är dold måste användarna svepa uppåt för att öppna den.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Förekomst av docka",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Om du låter användaren aktivera/inaktivera flödet, tillämpas den föregående inställningen för den första distributionen. Därefter tillämpas inte inställningen för att respektera eventuella ändringar som användaren har gjort. Den här inställningen är bara tillgängligt om du aktiverar Launcher-flödet.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Tillåt användarna att aktivera/inaktivera flöde",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Flödet är en extra skärm till höger om startskärmen där användarna har åtkomst till sina kalendrar, dokument och senaste aktiviteter. Om du inte aktiverar den, är den fortsatt inaktiverad. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Aktivera Launcher-flöde",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Placering av sökfältet",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Nederkant",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Dölj",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Överkant",
+ "deviceExperienceTypeName": "Typ av enhetsupplevelse",
"deviceGuardCredentialGuardDescription": "Aktivering med UEFI-lås säkerställer att Credential Guard inte kan inaktiveras via fjärranslutning. Aktivering utan UEFI-lås gör det möjligt att inaktivera Credential Guard via fjärransluten grupprincip.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "ID för Intune-enhet",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Antal dagar före övergång från automatisk omstart, schemalagd utanför aktiva timmar, till interaktiv omstart som användaren måste schemalägga.",
"engagedRestartTransitionScheduleName": "Användarna överförs till interaktiv omstart efter en automatisk omstart (dagar)",
"enhancedOption": "Utökad (1903 och tidigare)",
- "enrollmentProfileTypeDedicatedDevice": "Reserverad enhet",
- "enrollmentProfileTypeDescription": "Välj en typ av registreringsprofil och börja sedan ställa in Microsoft Launcher eller Microsoft Hanterad hemskärm på dina enheter. Om du inte väljer någon profiltyp visas enhetens standardhemskärm för användarna.",
- "enrollmentProfileTypeFullyManaged": "Fullständigt hanterat",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Ställ in Microsoft Launcher på dina fullständigt hanterade enheter.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Använd Microsoft Launcher för att anpassa hemskärmsupplevelsen på organisationens hanterade enheter. Om du gör Launcher till standardstartprogram kan användarna inte använda något annat startprogram.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Gör Microsoft Launcher till standardstartprogram",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Tillåt användarna att ändra bakgrundsbild",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Gör att du kan använda en egen bild som bakgrundsbild på startskärmen och välja om användaren kan ändra det. Om du inte ställer in en anpassad bakgrundsbild behålls den nuvarande bakgrundsbilden.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Ställ in anpassad bakgrundsbild",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Den här bilden visas som bakgrundsbild på enhetens startskärm. Fältet är bara tillgängligt om du ställer in en anpassad bakgrundsbild.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Ange bakgrundsbildens webbadress",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Inaktiverat",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Dölj",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Visa",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Dockan är en meny som ger användarenheterna snabbåtkomst till sina appar och verktyg. När den är dold måste användarna svepa uppåt för att öppna den.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Förekomst av docka",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Tillåt användarna att aktivera/inaktivera flöde",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Flödet är en extra skärm till höger om startskärmen där användarna har åtkomst till sina kalendrar, dokument och senaste aktiviteter. Om du inte aktiverar den, är den fortsatt inaktiverad. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Aktivera Launcher-flöde",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Placering av sökfältet",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Nedre",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Dölj",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Överst",
- "enrollmentProfileTypeName": "Typ av registreringsprofil",
"enrollmentSettingsHeading": "Registreringsinställningar",
"enterOnlyOneForDns": "Ange en lista över DNS-servrar och/eller en proxyserver.",
"enterpriseModeLoggingExample": "t.ex. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Fullständigt hanterade och företagsägda arbetsprofilenheter",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "De här inställningarna fungerar bara för fullständigt hanterade och reserverade enheter.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Fullständigt hanterade och reserverade enheter",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "De här inställningarna fungerar bara för fullständigt hanterade och dedikerade enheter som använder en helskärmsprincip.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Fullständigt hanterade och dedikerade enheter (endast helskärmsläge)",
"gameCenterBlockedMacDescription": "Ja inaktiverar Game Center och ikonen Game Center tas bort från Startskärmen. Tillgängligt för enheter som kör macOS version 10.13 eller senare.",
"gameCenterBlockedMacName": "Blockera Game Center",
"gamingPageDescription": "Blockera åtkomst till speltjänster i appen Inställningar.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Ställer in typ av inloggning för åtkomst till programmen på kioskenheten.",
"kioskShowTaskbarDesc": "Visa eller dölj Aktivitetsfältet på kioskenheten.",
"kioskShowTaskbarName": "Aktivitetsfältet",
+ "kioskSingleInfoBoxText": "Helskärmsläge – för enskild app Låser enheten för att köra den valda appen. Om du vill använda det här läget måste du först godkänna och tilldela den valda appen från klientappens arbetsbelastning. På fullständigt hanterade enheter är den enda valda appen som ska tillämpas hanterad startskärm. Alla andra appar behandlas som en obligatorisk app i stället.",
"kioskStartDateTime": "Starttid för underhållsperiod",
"kioskStartMenuLayoutXmlDesc": "Ange en XML-layout som anger i vilken ordning apparna ska visas på startmenyn",
"kioskStartMenuLayoutXmlDescV2": "Om du importerar en XML-fil som konfigurerar startlayouten åsidosätts den befintliga visningsordningen och valet av panelstorlek. Läs mer",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Måste vara en giltig filsökväg",
"mustBeAValidHttpsUrl": "Måste vara en giltig https-webbadress",
"mustBeAValidIPAddress": "Måste vara en giltig IP-adress (t.ex. 192.168.0.1 eller 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Värdet måste vara en giltig IP-adress eller ett fullständigt domännamn med valfritt portnummer.",
"mustBeAValidIPv4Address": "Måste vara en giltig IPv4-adress (t.ex. 192.168.0.1)",
"mustBeAValidIPv6Address": "Måste vara en giltig IPv6-adress (t.ex. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Måste vara en giltig bildwebbadress, till exempel www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Windows-brandväggsregler från det lokala arkivet (offentliga nätverk)",
"publicNetworkName": "Offentligt (osynligt) nätverk",
"publicOutboundConnectionsSummaryLabel": "Standardåtgärd för utgående anslutningar (offentliga nätverk)",
- "publicPlayStoreEnabledDescription": "Användarna får åtkomst till alla appar, förutom dem du har krävt ska avinstalleras i klientappar. Om du väljer Inte konfigurerat för den här inställningen har användarna bara åtkomst till de appar du listat som tillgängliga eller nödvändiga i klientappar.",
+ "publicPlayStoreEnabledDescription": "Om du markerar Tillåt får användarna åtkomst till alla appar, förutom dem du har krävt ska avinstalleras i klientappar. Om du väljer Blockera eller Inte konfigurerat för den här inställningen har användarna bara åtkomst till de appar du listat som tillgängliga eller nödvändiga i klientappar.",
"publicPlayStoreEnabledName": "Tillåt åtkomst till alla appar i Google Play-butiken",
- "publicPlayStoreEnabledWarning": "Om du väljer Tillåt kan användarna installera appar från Google Play Butik. Om du senare ändrar ditt val till \"Inte konfigurerad\" tas alla appar som inte uttryckligen tillåts för användaren bort från enheten.",
+ "publicPlayStoreEnabledWarning": "Om du väljer Tillåt kan användarna installera appar från Google Play Store. Om du senare ändrar ditt val till \"Blockera\" eller \"Inte konfigurerat\" tas alla appar bort från enheten, förutom de appar du angett som tillgängliga eller nödvändiga i klientappar.",
+ "publicPlayStoreSelectionAllowList": "Blockera",
+ "publicPlayStoreSelectionBlockList": "Tillåt",
+ "publicPlayStoreSelectionNotConfigured": "Inte konfigurerat",
"publicShieldedSummaryLabel": "Skärmat (offentliga nätverk)",
"publicStealthModeSummaryLabel": "Dolt läge (offentliga nätverk)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Unicast-svar på multicast-sändningar har blockerats (offentliga nätverk)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Tar bort ...",
"photoLibrary": "Fotobibliotek",
"pinCharSettingTooltip": "En numerisk PIN-kod får bara innehålla numeriska tecken.\r\n\r\nEtt lösenord måste innehålla följande: Alfanumeriska tecken och tillåtna symboler.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Viktigt! Den 1 juni 2024 får appar med ett SDK som är äldre än 17.7.0 inte längre uppdateringar av appskyddsprincipen och användarna hindras från att starta appen. Se till att användarna uppdaterar sina appar och att dina verksamhetsspecifika appar använder en ny SDK eller adapter. Mer information",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Plattform",
"platformDropDownLabel": "Plattform",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Enhet",
"licenseTypeUser": "Användare"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Egenskap ",
- "rule": "Regel",
- "ruleDetails": "Regelinformation",
- "value": "Värde"
- },
- "assignIf": "Tilldela profil om",
- "deleteWarning": "Den valda tillämplighetsregeln tas bort",
- "dontAssignIf": "Tilldela inte profil om",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "och {0} till",
- "instructions": "Ange hur den här profilen ska tillämpas i en tilldelad grupp. Profilen tillämpas endast på enheter som uppfyller de kombinerade villkoren för reglerna i Intune.",
- "maxText": "Max",
- "minText": "Min",
- "noActionRow": "Inga tillämplighetsregler har angetts",
- "oSVersion": "t.ex. 1.2.3.4",
- "toText": "till",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home – enkelt språk",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "Operativsystemutgåva",
- "windows10OsVersion": "Operativsystemsversion",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professionell Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Lika med",
- "greaterThan": "Större än",
- "greaterThanOrEqualTo": "Större än eller lika med",
- "lessThan": "Mindre än",
- "lessThanOrEqualTo": "Mindre än eller lika med",
- "notEqualTo": "Inte lika med"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Tillämpa kontroll av skriptsignatur och kör skriptet obemärkt",
- "enforceSignatureCheckTooltip": "Välj Ja om du vill kontrollera att skriptet har signerats av en betrodd utgivare så att skriptet körs utan varningar eller uppmaningar. Skriptet körs avblockerat. Välj Nej (standard) om du vill köra skriptet med slutanvändarens bekräftelse utan signaturkontroll.",
- "header": "Använd ett anpassat identifieringsskript",
- "runAs32Bit": "Kör skript som 32-bitarsprocess på 64-bitarsklienter",
- "runAs32BitTooltip": "Välj Ja om du vill köra skriptet i en 32-bitarsprocess på 64-bitarsklienter. Välj Nej (standard) om du vill köra skriptet i en 64-bitarsprocess på 64-bitarsklienter. 32-bitarsklienter kör skriptet i en 32-bitarsprocess.",
- "scriptContent": "Skriptinnehåll",
- "scriptFile": "Skriptfil",
- "scriptFileNotSelectedValidation": "Ingen skriptfil har valts.",
- "scriptFileTooltip": "Välj ett PowerShell-skript som identifierar förekomst av appen på klienten. Appen identifieras när skriptet både returnerar värdet 0 som slutkod och skriver ett strängvärde till STDOUT.",
- "scriptSizeLimitValidation": "Identifieringsskriptet överskrider den tillåtna maxstorleken. Lös problemet genom att minska storleken på skriptet."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Skapad",
- "dateModified": "Ändrad den",
- "doesNotExist": "Filen eller mappen finns inte",
- "fileOrFolderExists": "Fil eller mapp finns",
- "sizeInMB": "Storlek i MB",
- "version": "Sträng (version)"
- },
- "associatedWith32Bit": "Kopplat till en 32-bitarsapp på 64-bitarsklienter",
- "associatedWith32BitTooltip": "Välj Ja om du vill expandera eventuella sökvägsmiljövariabler i 32-bitarskontexten på 64-bitarsklienter. Välj Nej (standard) om du vill expandera eventuella sökvägsmiljövariabler i 64-bitarskontexten på 64-bitarsklienter. 32-bitarsklienter använder alltid 32-bitarskontexten.",
- "detectionMethod": "Identfieringsmetod",
- "detectionMethodTooltip": "Välj typ av identifieringsmetod som används för att verifiera förekomsten av appen.",
- "fileOrFolder": "Fil eller mapp",
- "fileOrFolderToolTip": "Den fil eller mapp som ska identifieras.",
- "operator": "Operator",
- "operatorTooltip": "Välj operator för identifieringsmetoden som används för att verifiera jämförelsen.",
- "path": "Sökväg",
- "pathTooltip": "Den fullständiga sökvägen till mappen som innehåller filen eller mappen som ska identifieras.",
- "value": "Värde",
- "valueTooltip": "Välj ett värde som matchar den valda identifieringsmetoden. Dataidentifieringsmetoder måste anges i lokal tid."
- },
- "GridColumns": {
- "pathOrCode": "Sökväg/kod",
- "type": "Typ"
- },
- "MsiRule": {
- "operator": "Operator",
- "operatorTooltip": "Välj operator för att jämföra MSI-produktversionsverifiering.",
- "productCode": "MSI-produktkod",
- "productCodeTooltip": "En giltig MSI-produktkod för appen.",
- "productVersion": "Värde",
- "productVersionCheck": "Kontroll av MSI-produktversion",
- "productVersionCheckTooltip": "Välj Ja om du utöver MSI-produktkoden också vill kontrollera MSI-produktversionen.",
- "productVersionTooltip": "Ange appens MSI-produktversion."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Heltalsjämförelse",
- "keyDoesNotExist": "Nyckeln finns inte",
- "keyExists": "Nyckeln finns",
- "stringComparison": "Strängjämförelse",
- "valueDoesNotExist": "Värdet finns inte",
- "valueExists": "Värdet finns",
- "versionComparison": "Versionsjämförelse"
- },
- "associatedWith32Bit": "Kopplat till en 32-bitarsapp på 64-bitarsklienter",
- "associatedWith32BitTooltip": "Välj Ja om du vill söka i 32-bitarsregistret på 64-bitarsklienter. Välj Nej (standard) om du vill söka i 64-bitarsregistret på 64-bitarsklienter. 32-bitarsklienter söker alltid i 32-bitarsregistret.",
- "detectionMethod": "Identfieringsmetod",
- "detectionMethodTooltip": "Välj typ av identifieringsmetod som används för att verifiera förekomsten av appen.",
- "keyPath": "Nyckelsökväg",
- "keyPathTooltip": "Den fullständiga sökvägen till registerposten som innehåller värdet som ska identifieras.",
- "operator": "Operator",
- "operatorTooltip": "Välj operator för identifieringsmetoden som används för att verifiera jämförelsen.",
- "value": "Värde",
- "valueName": "Värdenamn",
- "valueNameTooltip": "Namnet på det registervärde som ska identifieras.",
- "valueTooltip": "Välj ett värde som matchar den valda identifieringsmetoden."
- },
- "RuleTypeOptions": {
- "file": "Fil",
- "mSI": "MSI",
- "registry": "Register"
- },
- "gridAriaLabel": "Identifieringsregler",
- "header": "Skapa en regel som visar förekomst av appen.",
- "noRulesSelectedPlaceholder": "Inga regler har angetts.",
- "ruleTableLimit": "Du kan lägga till upp till 25 identifieringsregler",
- "ruleType": "Regeltyp",
- "ruleTypeTooltip": "Välj den typ av identifieringsregel du vill lägga till."
- },
- "RuleConfigurationOptions": {
- "customScript": "Använd ett anpassat identifieringsskript",
- "manual": "Ställ in identifieringsregler manuellt"
- },
- "bladeTitle": "Identifieringsregler",
- "header": "Ställ in appspecifika regler för att identifiera förekomst av appen.",
- "rulesFormat": "Regelformat",
- "rulesFormatTooltip": "Ställ antingen in identifieringsregler manuellt eller använd ett anpassat skript för att identifiera förekomst av appen.",
- "selectorLabel": "Identifieringsregler"
+ "BooleanActions": {
+ "allow": "Tillåt",
+ "block": "Blockera",
+ "configured": "Konfigurerat",
+ "disable": "Inaktivera",
+ "dontRequire": "Kräv inte",
+ "enable": "Aktivera",
+ "hide": "Dölj",
+ "limit": "Begränsning",
+ "notConfigured": "Inte konfigurerat",
+ "require": "Kräv",
+ "show": "Visa",
+ "yes": "Ja"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge app rekommenderade SmartScreen-inställningar: Windows 10 i molnkonfigurationsmallen. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Slutpunktsidentifiering och svar"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "App- och webbläsarisolering",
- "aSRApplicationControl": "Programreglering",
- "aSRAttackSurfaceReduction": "Regler för minskning av attackytan",
- "aSRDeviceControl": "Enhetskontroll",
- "aSRExploitProtection": "Sårbarhetsskydd",
- "aSRWebProtection": "Webbskydd (äldre Microsoft Edge)",
- "aVExclusions": "Microsoft Defender Antivirus-uteslutning",
- "antivirus": "Microsoft Defender Antivirus",
- "cloudPC": "Windows 365-säkerhetsbaslinje",
- "default": "Slutpunktsskydd",
- "defenderTest": "Demonstration av Microsoft Defender för Endpoint",
- "diskEncryption": "BitLocker",
- "eDR": "Slutpunktsidentifiering och svar",
- "edgeSecurityBaseline": "Microsoft Edge-baslinje",
- "edgeSecurityBaselinePreview": "Förhandsversion: Microsoft Edge-baslinje",
- "editionUpgradeConfiguration": "Utgåveuppgradering och lägesväxling",
- "firewall": "Windows-brandvägg",
- "firewallRules": "Windows-brandväggsregler",
- "identityProtection": "Kontoskydd",
- "identityProtectionPreview": "Kontoskydd (förhandsversion)",
- "mDMSecurityBaseline1810": "MDM-säkerhetsbaslinje för Windows 10 och senare för oktober 2018",
- "mDMSecurityBaseline1810Preview": "Förhandsversion: MDM-säkerhetsbaslinje för Windows 10 och senare för oktober 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Förhandsversion: MDM-säkerhetsbaslinje för Windows 10 för oktober 2018 (beta)",
- "mDMSecurityBaseline1906": "MDM-säkerhetsbaslinje för Windows 10 och senare för maj 2019",
- "mDMSecurityBaseline2004": "MDM-säkerhetsbaslinje för Windows 10 och senare för augusti 2020",
- "mDMSecurityBaseline2101": "MDM-säkerhetsbaslinje för Windows 10 och senare december 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS-brandvägg",
- "microsoftDefenderBaseline": "Baslinjeinställning för Microsoft Defender för Endpoint",
- "office365Baseline": "Microsoft Office O365-baslinje",
- "office365BaselinePreview": "Förhandsversion: Microsoft Office O365-baslinje",
- "securityBaselines": "Säkerhetsbaslinjer",
- "test": "Testmall",
- "testFirewallRulesSecurityTemplateName": "Windows-brandväggsregler (test)",
- "testIdentityProtectionSecurityTemplateName": "Kontoskydd (test)",
- "windowsSecurityExperience": "Windows-säkerhetsupplevelse"
- },
- "Firewall": {
- "mDE": "Windows-brandvägg"
- },
- "FirewallRules": {
- "mDE": "Windows-brandväggsregler"
- },
- "OneDriveKnownFolderMove": {
- "description": "Inställningar för flytt av känd mapp i OneDrive: Windows 10 i molnkonfigurationsmallen. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Kontoskydd",
- "administrativeTemplates": "Administrativa mallar",
- "androidCompliancePolicy": "Kompatibilitetsprincip för Android",
- "aospDeviceOwnerCompliancePolicy": "Kompatibilitetsprincip för Android (AOSP)",
- "applicationControl": "Appkontroll för företag",
- "attackSurfaceReductionRules": "Regler för att minska attackytan",
- "bitlocker": "BitLocker",
- "custom": "Anpassad",
- "deliveryOptimization": "Leveransoptimering",
- "derivedPersonalIdentityVerificationCredential": "Härledd autentiseringsuppgift",
- "deviceControl": "Enhetskontroll",
- "deviceFeatures": "Enhetsfunktioner",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Enhetslås",
- "deviceOwner": "Fullständigt hanterad, särskilt avsedd och företagsägd arbetsprofil",
- "deviceRestrictions": "Enhetsbegränsningar",
- "deviceRestrictionsWindows10Team": "Enhetsbegränsningar (Windows 10 Team)",
- "domainJoinPreview": "Domänanslutning",
- "editionUpgradeAndModeSwitch": "Utgåveuppgradering och lägesväxling",
- "education": "Utbildning",
- "email": "E-post",
- "emailSamsungKnoxOnly": "Cookies (endast Samsung KNOX)",
- "endpointProtection": "Slutpunktsskydd",
- "expeditedCheckin": "Konfiguration för hantering av mobil enhet",
- "exploitProtection": "Sårbarhetsskydd",
- "extensions": "Tillägg",
- "hardwareConfigurations": "BIOS-konfigurationer och andra inställningar",
- "identityProtection": "Identitetsskydd",
- "iosCompliancePolicy": "Kompatibilitetsprincip för iOS",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Redigera användargruppsmedlemskap",
- "macCompliancePolicy": "Kompatibilitetsprincip för Mac",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365-applikationer för säkerhetsbaslinje för företag",
- "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus-uteslutning",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender för Endpoint (stationära enheter som kör Windows 10 eller senare)",
- "microsoftDefenderFirewallRules": "Windows-brandväggsregler",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Säkerhetsbaslinje för Microsoft Edge",
- "mxProfileZebraOnly": "MX-profil (endast Zebra)",
- "networkBoundary": "Nätverksgräns",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Åsidosätt grupprincip",
- "pkcsCertificate": "PKCS-certifikat",
- "pkcsImportedCertificate": "PKCS-importerat certifikat",
- "preferenceFile": "Prioritetsfil",
- "presets": "Förinställningar",
- "scepCertificate": "SCEP-certifikat",
- "secureAssessmentEducation": "Begränsad provmiljö (utbildning)",
- "securityBaselineForHololens2Advanced": "Avancerad säkerhetsbaslinje för HoloLens 2",
- "securityBaselineForHololens2Standard": "Standardsäkerhetsbaslinje för HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Säkerhetsbaslinje för Microsoft Edge",
- "settingsCatalog": "Inställningskatalog",
- "sharedMultiUserDevice": "Delad enhet för flera användare",
- "softwareUpdates": "Programuppdateringar",
- "trustedCertificate": "Betrott certifikat",
- "unknown": "Okänd",
- "unsupported": "Stöds inte",
- "vpn": "VPN",
- "wiFi": "Trådlöst",
- "wiFiImport": "Trådlöst (import)",
- "windows10CompliancePolicy": "Kompatibilitetsprincip för Windows 10/11",
- "windows10MobileCompliancePolicy": "Kompatibilitetsprincip för Windows 10 Mobile",
- "windows10XScep": "SCEP-certifikat – TEST",
- "windows10XTrustedCertificate": "Betrott certifikat – TEST",
- "windows10XVPN": "VPN – TEST",
- "windows10XWifi": "WIFI – TEST",
- "windows11SecurityBaseline": "Säkerhetsbaslinje för Windows 10 och senare",
- "windows365SecurityBaseline": "Windows 365-säkerhetsbaslinje",
- "windows8CompliancePolicy": "Kompatibilitetsprincip för Windows 8",
- "windowsHealthMonitoring": "Hälsoövervakning i Windows",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Kompatibilitetsprincip för Windows Phone",
- "windowsUpdateforBusiness": "Windows Update för företag",
- "wiredNetwork": "Kabelanslutet nätverk",
- "workProfile": "Privatägd arbetsprofil"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Gör uppdateringen tillgänglig gradvis",
- "immediateStart": "Gör uppdateringen tillgänglig så snart som möjligt",
- "startDateOnly": "Gör uppdateringen tillgänglig på ett visst datum"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Hanterade enheter",
- "devicesWithoutEnrollment": "Hanterade appar"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filter",
- "assignmentFilterTypeColumnHeader": "Filterläge",
- "assignmentToast": "Slutanvändarmeddelanden",
- "assignmentTypeTableHeader": "TILLDELNINGSTYP",
- "autoUpdate": "Automatisk uppdatering",
- "deadlineTimeColumnLabel": "Tidsgräns för installation",
- "deliveryOptimizationPriorityHeader": "Prioritet för leveransoptimering",
- "groupTableHeader": "Grupp",
- "installContextLabel": "Installationssammanhang",
- "isRemovable": "Installera som flyttbart",
- "licenseTypeLabel": "Licenstyp",
- "modeTableHeader": "Gruppläge",
- "policySet": "Principuppsättning",
- "preventAutoAppUpdate": "Förhindra automatiska uppdateringar av appar",
- "preventManagedAppBackup": "Förhindra säkerhetskopiering av iCloud-app",
- "restartGracePeriodHeader": "Respitperiod för omstart",
- "startTimeColumnLabel": "Tillgänglighet",
- "tracks": "Spår",
- "uninstallOnRemoval": "Avinstallera när enheten tas bort",
- "updateMode": "Uppdateringsprioritet",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD-webbapp",
- "androidEnterpriseSystemApp": "Android Enterprise-systemapp",
- "androidForWorkApp": "App från hanterad Google Play-butik",
- "androidLobApp": "Branschspecifik Android-app",
- "androidStoreApp": "Google Play-app",
- "builtInAndroid": "Inbyggd Android-app",
- "builtInApp": "Inbyggd app",
- "builtInIos": "Inbyggd iOS-app",
- "iosIPadOSWebClip": "Webbklipp för iOS/iPadOS",
- "iosLobApp": "Branschspecifik iOS-app",
- "iosStoreApp": "iOS Store-app",
- "iosVppApp": "Volyminköpsprogramapp för iOS",
- "lineOfBusinessApp": "Branschspecifik app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "Verksamhetsspecifik macOS-app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office-paket",
- "macOSPkgApp": "macOS-app (PKG)",
- "macOSWebClip": "macOS-webbklipp",
- "macOsVppApp": "Volyminköpsprogramapp för macOS",
- "managedAndroidLobApp": "Hanterad branschspecifik Android-app",
- "managedAndroidStoreApp": "Hanterad Google Play-app",
- "managedGooglePlayApp": "App från hanterad Google Play-butik",
- "managedGooglePlayPrivateApp": "Privat app från hanterad Google Play-butik",
- "managedGooglePlayWebApp": "Hanterad Google Play-webblänk",
- "managedIosLobApp": "Hanterad branschspecifik iOS-app",
- "managedIosStoreApp": "Hanterad iOS Store-app",
- "microsoftStoreForBusinessApp": "Microsoft Store för företag-app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store för företag",
- "officeAddIn": "Office-tillägg",
- "officeSuiteApp": "Microsoft 365-applikationer (Windows 10 och senare)",
- "sharePointApp": "SharePoint-app",
- "teamsApp": "Teams-app",
- "webApp": "Webblänk",
- "win32CatalogApp": "Windows-katalogapp (Win32)",
- "winGetPublicApp": "Windows Package Manager communitylagringsplats",
- "winGetStoreApp": "Microsoft Store app (ny)",
- "windowsAppXLobApp": "Branschspecifik Windows AppX-app",
- "windowsClassicApp": "Windows-app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 och senare)",
- "windowsMobileMsiLobApp": "Branschspecifik Windows MSI-app",
- "windowsPhone81AppXBundleLobApp": "Branschspecifik Windows Phone 8.1 AppX-app",
- "windowsPhone81AppXLobApp": "Branschspecifik Windows Phone 8.1 AppX-app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 Store-app",
- "windowsPhoneXapLobApp": "Branschspecifik Windows Phone XAP-app",
- "windowsStoreApp": "Microsoft Store app (äldre)",
- "windowsUniversalAppXLobApp": "Branschspecifik Windows Universal AppX-app",
- "windowsUniversalLobApp": "Branschspecifik universell Windows-app",
- "windowsWebApp": "Windows-webblänk"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Webben",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Undantaget",
- "include": "Inklusive",
- "includeAllDevicesVirtualGroup": "Inklusive",
- "includeAllUsersVirtualGroup": "Inklusive"
- },
- "AssignmentToast": {
- "hideAll": "Dölj alla popup-meddelanden",
- "showAll": "Visa alla popup-meddelanden",
- "showReboot": "Visa popup-meddelanden om omstart av dator"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Ja",
- "notConfigured": "Nej"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Bakgrund",
- "displayText": "Innehållsnedladdning i {0}",
- "foreground": "Förgrund",
- "header": "Prioritet för leveransoptimering"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "Appinstallation kan tvinga fram omstart av enhet",
- "basedOnReturnCode": "Bestäm beteende baserat på returkoder",
- "force": "Intune tvingar fram obligatorisk omstart av enhet",
- "suppress": "Ingen särskild åtgärd"
- },
- "FilterType": {
- "exclude": "Undanta",
- "include": "Ta med",
- "none": "Inget"
- },
- "InstallIntent": {
- "available": "Tillgängligt för registrerade enheter",
- "availableWithoutEnrollment": "Tillgänglig med eller utan registrering",
- "notApplicable": "Saknas",
- "required": "Obligatoriskt",
- "uninstall": "Avinstallera"
- },
- "SettingType": {
- "assignmentType": "Tilldelningstyp",
- "deviceLicensing": "Licenstyp",
- "installContext": "Avinstallera när enheten tas bort",
- "toastSettings": "Slutanvändarmeddelanden",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Standardinställning",
- "postponed": "Uppskjuten",
- "priority": "Hög prioritet"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Konfigurera enheter för inledande etablering.",
- "title": "Enhetsförberedelse"
- },
- "EnrollmentSettings": {
- "description": "Konfigurera registreringsinställningar, som att blockera registrering och tilldela till användare.",
- "title": "Registreringsinställningar"
- },
- "OSConfiguration": {
- "menuDescription": "Konfigurera inställningar som användarna kan använda för att återställa Windows från ett startbart flashminne.",
- "menuTitle": "Återställningskonfiguration för Windows operativsystem"
- },
- "coManagementAuthorityDesc": "Ställ in samhanteringsinställningar för Configuration Manager-integrering",
- "coManagementAuthorityTitle": "Samhanteringsinställningar ",
- "deploymentProfiles": "Windows AutoPilot-distributionsprofiler",
- "description": "Lär dig om sju olika sätt att registrera en Windows 10/11-dator på Intune av användare eller administratörer.",
- "descriptionLabel": "Windows-registreringsmetoder",
- "enrollmentStatusPage": "Statussidan för registrering"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Godkänn automatiskt alla rekommenderade drivrutinsuppdateringar",
- "manual": "Godkänn och distribuera drivrutinsuppdateringar manuellt"
- },
- "BulkActions": {
- "button": "Massåtgärder"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Godkännandemetod:"
- },
- "DeploymentDeferralInDays": {
- "label": "Gör uppdateringar tillgängliga efter",
- "units": "(dagar)",
- "value": "{0} dagar"
- },
- "DriverAction": {
- "header": "Välj en åtgärd nedan.",
- "label": "Drivrutinsåtgärd",
- "placeholder": "Välj en åtgärd"
- },
- "IncludedDrivers": {
- "label": "Drivrutiner som ingår"
- },
- "SelectDrivers": {
- "header": "Välj drivrutiner som ska ingå i massåtgärden"
- },
- "SelectDriversToInclude": {
- "button": "Välj drivrutiner som ska inkluderas"
- },
- "SelectLessDrivers": {
- "validation": "Högst hundra drivrutiner kan väljas"
- },
- "SelectMoreDrivers": {
- "validation": "Minst en drivrutin ska väljas"
- },
- "SelectedDrivers": {
- "label": "Valda drivrutiner"
- },
- "availabilityDate": "Gör tillgängligt i Windows Update",
- "bladeTitle": "Drivrutinsuppdateringar Windows 10 och senare (förhandsversion)",
- "lastSync": "Senaste synkronisering:",
- "lastSyncDefaultText": "Väntar på inledande inventeringsinsamling",
- "loadError": "Det gick inte att läsa in!"
- },
- "DriverStatus": {
- "approved": "Godkänd",
- "declined": "Avböjt",
- "export": "Exporterar rekommenderade drivrutiner",
- "needsReview": "Behöver granskas",
- "paused": "Pausad"
- },
- "DriversToReview": {
- "text": "{0} att granska"
- },
- "Subtitle": {
- "automatic": "Princip för automatisk uppdatering av godkännandedrivrutin",
- "manual": "Uppdateringsprincip för manuell godkännandedrivrutin"
- },
- "SyncNotification": {
- "failure": "Det går inte att synkronisera {0}",
- "failureDescription": "Vi påträffade ett fel och kunde inte slutföra den begärda synkroniseringen. Försök igen.",
- "pending": "{0} synkronisering pågår",
- "pendingDescription": "Vi hämtar de senaste data. Den här processen kan ta flera minuter.",
- "success": "{0} synkroniseringen är klar",
- "successDescription": "Synkronisering med WUfB-tjänsten slutfördes {0}"
- },
- "SyncSpinner": {
- "text": "En synkronisering pågår. Det kan ta flera minuter. Leta efter en avisering eller kom tillbaka om några minuter."
- },
- "TabName": {
- "basics": "Grundläggande information",
- "driverUpdateSettings": "Inställningar",
- "otherDrivers": "Andra drivrutiner",
- "properties": "Egenskaper",
- "recommendedDrivers": "Rekommenderade drivrutiner"
- },
- "driverAddFilter": "Lägg till filter",
- "driverApplicableDevices": "Tillämpliga enheter",
- "driverApprovalStatus": "Status",
- "driverBulkActions": "Massåtgärder",
- "driverClass": "Drivrutinsklass",
- "driverCount": "Visar {0} till {1} av {2} poster",
- "driverFilterNoneSelected": "Inga valda",
- "driverManufacturer": "Tillverkare",
- "driverName": "Drivrutinsnamn",
- "driverNameLower": "drivrutinsuppdateringsdistribution för windows",
- "driverNameUpper": "drivrutinsuppdateringsdistribution för Windows",
- "driverRefresh": "Uppdatera",
- "driverReleaseDate": "Utgivningsdatum",
- "driverSearch": "Sök",
- "driverSearchKeyword": "Ange sökord",
- "driverVersion": "Version",
- "firstDeploymentDate": "Första distribution",
- "infoBoxText": "Inventeringen kan ta upp till 24 timmar att fylla efter att en princip har tilldelats och skapats.",
- "textBlockText": "Välj inställningar för principgodkännande och distribution. Välj att konfigurera en princip för att godkänna och distribuera uppdateringar automatiskt eller manuellt. Det går inte att ändra godkännandemetoden när en princip har skapats, men det går att ändra enskilda drivrutinsgodkännanden och distributionsinformation när en inventering har skapats för tilldelade enheter."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Använd de här inställningarna för att få information om vilka användare som installerar appar som inte är godkända för användning i företaget. Välj typ av lista över begränsade appar:
\r\n Förbjudna appar – en lista över appar som du vill bli informerad om när användare installerar. \r\n Godkända appar – en lista över appar som är godkända för användning i företaget. Du informeras när användare installerar en app som inte finns med på listan. \r\n ",
- "androidZebraMxZebraMx": "Konfigurera Zebra-enheter genom att ladda upp en MX-profil i XML-format.",
- "iosDeviceFeaturesAirprint": "Använd de här inställningarna för att ställa in iOS-enheter på att automatiskt ansluta till AirPrint-kompatibla skrivare i nätverket. Du behöver IP-adress och resurssökväg till dina skrivare.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Ställ in ett apptillägg som aktiverar enkel inloggning för enheter som kör iOS 13.0 eller senare.",
- "iosDeviceFeaturesHomeScreenLayout": "Ställ in layouten för Dock och hemskärmar på iOS-enheter. Vissa enheter kan ha begränsningar för hur många objekt som får visas.",
- "iosDeviceFeaturesIOSWallpaper": "Visa en bild som ska synas på hemskärmen och/eller låsskärmen på iOS-enheter.\r\n Om du vill visa en unik bild på varje plats skapar du en profil med låsskärmsbilden och en med hemskärmsbilden.\r\n Tilldela sedan användarna båda profilerna.\r\n \r\n
\r\n
Maximal filstorlek: 750 kB
\r\n
Filtyp: PNG, JPG eller JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Ange aviseringsinställningar för appar. Har stöd för iOS 9.3 och senare.",
- "iosDeviceFeaturesSharedDevice": "Ange valfri text som ska visas på den låsta skärmen. Det här stöds på iOS 9.3 och senare. Läs mer",
- "iosGeneralApplicationRestrictions": "Använd de här inställningarna för att få information om vilka användare som installerar appar som inte är godkända för användning i företaget. Välj typ av lista över begränsade appar:
\r\n Förbjudna appar – en lista över appar som du vill bli informerad om när användare installerar. \r\n Godkända appar – en lista över appar som är godkända för användning i företaget. Du informeras när användare installerar en app som inte finns med på listan. \r\n ",
- "iosGeneralApplicationVisibility": "Använd listan med visade appar för att ange de iOS-appar som användaren kan visa eller starta. Använd listan med dolda appar för att ange de iOS-appar som användaren inte får visa eller starta.",
- "iosGeneralAutonomousSingleAppMode": "Appar som du lägger till i listan och kopplar till en enhet kan låsa enheten så att bara den appen körs efter start, eller låsa enheten medan en viss åtgärd pågår (till exempel när du gör ett prov). När åtgärden har slutförts, eller om du tar bort begränsningen, återgår enheten till normalläget.",
- "iosGeneralKiosk": "I kioskläget låses olika inställningar på en enhet eller också anges det att bara en viss app kan köras på en enhet. Det kan vara praktiskt i butiksmiljöer där du vill att bara en viss demoapp ska köras på enheten.",
- "macDeviceFeaturesAirprint": "Använd de här inställningarna för att ställa in macOS-enheter på att automatiskt ansluta till AirPrint-kompatibla skrivare i nätverket. Du behöver IP-adress och resurssökväg till dina skrivare.",
- "macDeviceFeaturesAssociatedDomains": "Konfigurera tillhörande domäner för delning av data och inloggningsuppgifter mellan organisationens appar och webbplatser. Den här profilen kan tillämpas på enheter som kör macOS 10.15 eller senare.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Ställ in ett apptillägg som aktiverar enkel inloggning för enheter som kör macOS 10.15 eller senare.",
- "macDeviceFeaturesLoginItems": "Välj vilka appar, filer och mappar som ska öppnas när användarna loggar in på sina enheter. Om du inte vill att användarna ska kunna ändra hur valda appar ska öppnas, kan du dölja appen från användarkonfigurationen.",
- "macDeviceFeaturesLoginWindow": "Ställ in hur macOS-inloggningsskärmen ska se ut och vilka funktioner som ska visas för användarna innan och efter de loggar in.",
- "macExtensionsKernelExtensions": "Använd de här inställningarna för att ange en princip för kerneltillägg på macOS-enheter som kör 10.13.2 eller senare.",
- "macGeneralDomains": "E-postmeddelanden som användaren skickar eller tar emot och som inte matchar de domäner du anger här, markeras som icke tillförlitliga.",
- "windows10EndpointProtectionApplicationGuard": "När du använder Microsoft Edge skyddar Microsoft Defender Application Guard din miljö mot webbplatser som din organisation inte har definierat som tillförlitliga. När användare besöker webbplatser som inte är med på listan för ditt isolerade nätverk, öppnas webbplatserna i en virtuell webbläsarsession i Hyper-V. Tillförlitliga webbplatser definieras av en nätverksgräns som kan ställas in i Enhetskonfiguration. Observera att den här funktionen endast är tillgänglig för enheter som kör 64-bitars Windows 10 eller senare.",
- "windows10EndpointProtectionCredentialGuard": "Om du aktiverar Credential Guard aktiveras följande obligatoriska inställningar:\r\n \r\n
\r\n
Aktivera virtualiseringsbaserad säkerhet: Virtualiseringsbaserad säkerhet (VBS) aktiveras vid nästa omstart. För virtualiseringsbaserad säkerhet används Windows Hypervisor för att ge stöd för säkerhetstjänster.
\r\n \r\n
Säker start med direkt minnesåtkomst: VBS aktiveras med säker start och direkt minnesåtkomst (DMA).
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Välj ytterligare appar som antingen måste granskas av eller som är betrodda att köras av Microsoft Defender Application Control. Windows-komponenter och alla appar från Windows Store är automatiskt betrodda att köras.
\r\n Program blockeras inte när de körs i läget Endast granskning. I läget Endast granskning, loggas alla händelser i lokala klientloggar.\r\n ",
- "windows10GeneralPrivacyPerApp": "Lägg till appar som ska ha en annan sekretesspolicy än den du definierade i Standardsekretess.",
- "windows10NetworkBoundaryNetworkBoundary": "Nätverksgränsen är en lista över företagsresurser, till exempel molnbaserade domäner och IP-adressintervall för datorer i företagsnätverket. Ange nätverksgränser för att tillämpa principer som skyddar data på de här platserna.",
- "windowsHealthMonitoring": "Ställ in hälsoövervakningsprincipen i Windows.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone kan blockera användare från att installera eller starta appar som står med i listan över otillåtna appar eller appar som inte står med i listan över godkända appar. Alla hanterade appar måste läggas till i listan över godkända appar."
- },
- "Inputs": {
- "accountDomain": "Kontodomän",
- "accountDomainHint": "t.ex. contosodomain",
- "accountDomainInfoBalloon": "Ange användarens kontodomän.",
- "accountTypeInfoBalloon": "Ange den kontotyp som har ställts in baserat på autentiseringsmodell",
- "allowContactSetting": "Tillåt användaren att ändra kontaktinställning",
- "allowContactSyncInfoBalloon": "Ange om användaren får ändra inställningen för kontaktsynkronisering",
- "allowUserChange": "Tillåt användaren att ändra inställning",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Ange ett paketnamn liknande com.microsoft.word",
- "androidUrlValidation": "Ange en giltig webbadress av typen https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "Appinstallationskontext",
- "appUrlLabel": "Webbadress till appbutik",
- "appleUrlValidation": "Ange en giltig webbadress i formatet https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Tillämplig enhetstyp",
- "assignmentActionLabel": "Läge",
- "authenticationMethodInfoBalloon": "Ange autentiseringsmetod för användaren",
- "authenticationMetod": "Autentiseringsmetod",
- "authenticationType": "Autentiseringstyp",
- "authenticationTypeInfoBalloon": "Ange autentiseringstyp för användaren",
- "availableLicenseCount": "Tillgängliga licenser",
- "basicAuth": "Grundläggande autentisering",
- "biometricsInfoBalloon": "Användarna kan behöva använda biometrik, till exempel TouchID och FaceID, för att öppna appen på sina enheter. Om så är fallet används biometrik utöver den autentiseringsmetod som valts i profilen. Den här inställningen bör inte aktiveras när Intune-principer för appskydd har distribuerats eftersom appskyddsprincipen omfattar åtkomstkrav innan hanterade data kan öppnas. Om båda alternativen är aktiverade ställs flera åtkomstkrav för att öppna Outlook Mobile. När alternativet inte är konfigurerat är standardappinställningen Av. ",
- "bookNameLabel": "Namn på bok",
- "bundleDescriptionHint": "Ange en beskrivning av apparna i samlingen.",
- "calendar": "Kalender",
- "categoryLabel": "Kategori",
- "categoryNameLabel": "Standardnamn",
- "certProfileType": "Typ av certifikatprofil",
- "certificate": "Certifikat",
- "certificates": "Certifikat",
- "commandLineLabel": "Kommandoradsargument",
- "commandLineSizeHint": "Texten i kommandoradsargumenten får innehålla högst 1 024 tecken",
- "configurationSettingsFormatLabel": "Format för konfigurationsinställningar",
- "configurationSettingsLabel": "Inställningsformat",
- "contactSync": "Spara kontakter",
- "contactSyncInfoBalloon": "När kontakter sparas i mobilens inbyggda adressbok kan nya samtal och sms länkas till användarens befintliga Outlook-kontakter. När alternativet inte är konfigurerat är standardappinställningen Av.",
- "contacts": "Kontakter",
- "createdDateTime": "Skapad",
- "defaultCategoryHint": "Standardkategorierna kan inte ändras",
- "deploySMimeCertsFromIntune": "Distribuera S/MIME-certifikat från Intune",
- "descriptionGenericLabel": "Beskrivning",
- "descriptionHint": "Ange en beskrivning…",
- "descriptionLabel": "Beskrivning",
- "descriptionSizeHint": "Beskrivningen får innehålla högst 10 000 tecken",
- "developerLabel": "Utvecklare",
- "developerSizeHint": "Utvecklarens namn får innehålla högst 256 tecken.",
- "disable": "Inaktivera",
- "disabled": "Inaktiverat",
- "displayNameLabel": "Namn",
- "displayVersionHint": "Ange appversionen",
- "displayVersionLabel": "Appversion",
- "displayVersionLengthCheck": "Visningsversionen får innehålla högst 130 tecken",
- "eBookCategoryNameLabel": "Standardnamn",
- "emailAccount": "Namn på e-postkonto",
- "emailAccountHint": "t.ex. e-post för företag",
- "emailAccountInfoBalloon": "Ange visningsnamn för e-postkontot som det visas för användarna på deras enheter",
- "emailAddressAttribute": "E-postadressattribut från Microsoft Entra ID",
- "emailAddressInfoBalloon": "Ange den e-postadress som ska användas för att skicka och ta emot e-post",
- "emailServer": "E-postserver",
- "emailServerHint": "t.ex. mail.contoso.com",
- "emailServerInfoBalloon": "Ange värdnamnet för Exchange Server",
- "enable": "Aktivera",
- "enableSMime": "Aktivera S/MIME",
- "enabled": "Aktiverad",
- "encryptAllEmails": "Kryptera alla mejl",
- "encryptionCertificates": "Krypteringscertifikat",
- "endUserNotifications": "Slutanvändarmeddelanden",
- "enrollmentTypeLabel": "Registreringstyp för enhet",
- "externalRecipients": "E-posttips om externa mottagare",
- "externalRecipientsInfoBalloon": "E-posttips om externa mottagare visas om avsändaren lägger till en extern mottagare eller en distributionsgrupp som innehåller externa mottagare. Avsändarna meddelas när ett mejl de skriver ska lämna organisationen, och hjälper dem att fatta rätt beslut om ordval, tonläge och innehåll. Endast tillgängligt för Exchange Online-konton och lokala konton som använder modern hybridautentisering. När alternativet inte är konfigurerat är standardappinställningen På.",
- "focusedInbox": "Prioriterad inkorg",
- "focusedInboxInfoBalloon": "Prioriterad inkorg delar upp inkorgen i två flikar: Prioriterad och Övrig. Dina viktigaste mejl visas på fliken Prioriterad medan resten flyttas till fliken Övrig, fortfarande lättillgängligt. När alternativet inte är konfigurerat är standardappinställningen På. ",
- "fullScreenEnabledLabel": "Helskärm",
- "gmailNineAmountOfEmail": "Mängd e-post som ska synkroniseras",
- "gmailNineAuthenticationMethodInfoBalloon": "Välj hur du vill att användarna ska autentiseras på e-postservern. Använd certifikat för att ge användarna den säkraste och smidigaste upplevelsen. Certifikatbaserad autentisering kan inte användas ännu eftersom SCEP- och PKCS-certifikatprofiler för enhetsägarenheter inte är tillgängliga. ",
- "gmailNineCertificateUPNInfoBalloon": "Certifikatet måste innehålla användarens huvudnamn (UPN) som alternativt certifikatmottagarnamn.",
- "gmailNineEmailAddressInfoBalloon": "Attributet som Intune får från Microsoft Entra ID för att dynamiskt generera den e-postadress som ska användas av den här profilen, t.ex. MittNamn@contoso.com (UPN). Läs mer om Microsoft Entra-attribut för e-postprofiler.",
- "gmailNineEmailServerInfoBalloon": "Exchange-platsen (webbadress) för den e-postsserver som den angivna appen ansluter till för att hämta e-post.",
- "gmailNineEmailSynchronizeInfoBalloon": "Styr hur stor mängd e-post klienten ska synkronisera.",
- "gmailNineSSLInfoBalloon": "Aktivera SSL för att skydda all kommunikation med e-postservern.",
- "gmailNineUsernameInfoBalloon": "Attributet som Intune får från Microsoft Entra ID för att dynamiskt generera det användarnamnet som ska användas av den här profilen, t.ex. MittNamn@contoso.com (UPN) eller MyName (användarnamn). Läs mer om Microsoft Entra-attribut för e-postprofiler.",
- "ignoreManifestScope": "Ignorera manifestets omfång",
- "ignoreVersionDetection": "Ignorera appversion",
- "informationUrlLabel": "Webbadress till information",
- "informationUrlSizeHint": "Informationswebbadressen får bestå av högst 1 024 tecken.",
- "installAsManaged": "Installera som hanterat",
- "installationSourceLabel": "Apptyp",
- "installerTypeInfoBalloon": "Installationstypen för programpaketet.",
- "installerTypeLabel": "Installationstyp",
- "isFeatured": "Visa den här som aktuell app på företagsportalen",
- "isMAMEnabledToggleLabel": "Ja",
- "lastModifiedDateTime": "Senast uppdaterad",
- "ldapUrl": "LDAP-webbadress",
- "licensingType": "Har stöd för tilldelning av enhetssammanhang",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Lägsta operativsystemsversion",
- "modernAuth": "Modern autentisering",
- "nameHint": "Ange ett namn",
- "nameLabel": "Namn",
- "nameSizeHint": "Namnet får innehålla högst 512 tecken.",
- "notConfigured": "Inte konfigurerat",
- "notesLabel": "Anteckningar",
- "notesSizeHint": "Anteckningstexten får innehålla högst 1 024 tecken.",
- "notificationType": "Meddelandetyp",
- "oneDay": "En dag",
- "oneMonth": "En månad",
- "oneWeek": "En vecka",
- "outlookSMimeSettings": "Outlook S/MIME-inställningar",
- "ownerLabel": "Ägare",
- "ownerSizeHint": "Ägarens namn får innehålla högst 256 tecken.",
- "packageIdLabel": "Paketidentifierare",
- "packageNameLabel": "Paketnamn",
- "pivCredentialNotConfigured": "Du har inte valt någon utfärdare av härledda autentiseringsuppgifter för klientorganisationen. Du måste först ställa in en utfärdare innan du kan tillämpa principen på enheter.",
- "platformLabel": "Plattform",
- "policyDescriptionLabel": "Beskrivning",
- "policyNameLabel": "Namn",
- "preComposedIconEnabled": "Förkomponerat",
- "primarySMTPAddress": "Primär SMTP-adress",
- "privacyUrlLabel": "Sekretesswebbadress",
- "publisherHint": "Ange ett utgivarnamn",
- "publisherLabel": "Utgivare",
- "publisherSizeHint": "Namnet på utgivaren måste innehålla mellan 2 och 1 024 tecken",
- "require": "Kräv",
- "requireBiometrics": "Kräv biometrik för att få åtkomst till appen",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "Minst en omfångstagg krävs",
- "searchAppLabel": "Välj app",
- "searchAppLinkText": "Sök i App Store",
- "searchWinGetPublicRepositoryLinkText": "Sök i Windows Package Manager communitylagringsplats",
- "searchWinGetStoreRepositoryLinkText": "Sök i appen Microsoft Store (ny)",
- "selectAAD": "Välj ett Microsoft Entra-attribut",
- "selectAppFileLabel": "Välj fil",
- "selectAppFileLinkText": "Välj appaketfil",
- "selectAppFileToUpdateLabel": "Välj fil som ska uppdateras",
- "selectAuthMethod": "Välj en autentiseringsmetod",
- "selectAuthType": "Välj en autentiseringstyp",
- "selectCatalogAppLabel": "Välj app",
- "selectCatalogAppLinkText": "Sök i företagsappkatalogen",
- "selectCertificate": "Välj ett certifikat",
- "signAllEmails": "Signera alla mejl",
- "signingCertificates": "Signeringscertifikat",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Beskrivning av svit",
- "suiteNameLabel": "Namn på svit",
- "targetApplicationBundleIdentifier": "Målidentifiering av programpaket",
- "targetedPlatformsLabel": "Riktad plattform",
- "tasks": "Aktiviteter",
- "threeDays": "Tre dagar",
- "totalLicenseCount": "Totalt antal licenser",
- "twoWeeks": "Två veckor",
- "unifiedAssignmentsLabel": "Tilldela till:",
- "unlimited": "Obegränsad",
- "urlHint": "Ange en giltig webbadress",
- "useManagedBrowserHint": "Endast Android och iOS. Läs mer",
- "useManagedBrowserLabel": "Det krävs en hanterad webbläsare för att öppna den här länken",
- "userPrinicipalName": "Användarens huvudnamn",
- "username": "Användarnamn",
- "usernameAttribute": "Användarnamnsattribut från Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Ange UPN-namnet (User Principal Name) för den e-postprofil som ska användas för att autentisera kontot",
- "usernamePassword": "Användarnamn och lösenord",
- "webAppUrlHint": "Ange en giltig URL som börjar med http:// eller https://",
- "webAppUrlLabel": "Appens webbadress",
- "webAppUrlSizeHint": "App URL:en får högst bestå av 1024 tecken.",
- "windowsUrlValidation": "Ange en giltig URL som liknar https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "XML-data har angetts",
- "xmlFormatInvalid": "XML-principformatet är ogiltigt.",
- "xmlTooLarge": "Storleken på indata måste vara mindre än 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Det gick inte att ta bort {0}",
- "failureCa": "Det gick inte att ta bort {0} eftersom certifikatutfärdarprinciper refererar till den",
- "modifying": "Tar bort {0}",
- "success": "{0} har tagits bort"
- },
- "Notify": {
- "failure": "Det gick inte att uppdatera {0}",
- "modifying": "Ändrar {0}",
- "success": "Uppdaterade {0}"
- },
- "menuLabel": "Autentiseringssammanhang"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Läs mer om att kräva autentiseringsmetoder som uppfylls av federationsprovidrar.",
- "certificate": "Certifikatautentisering",
- "infoBubble": "Ange en nödvändig autentiseringsmetod som måste uppfyllas av en federationsprovider, t.ex. ADFS.",
- "multifactor": "Multifaktorautentisering",
- "require": "Kräv federerad autentiseringsmetod (förhandsversion)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "En princip för beständig webbläsarsession fungerar bara korrekt när Alla molnappar har valts. Uppdatera ditt val av molnappar."
- },
- "Option": {
- "always": "Alltid beständig",
- "help": "En beständig webbläsarsession tillåter användare att förbli inloggade efter det att de har stängt sitt webbläsarfönster och öppnat det igen. \n
\n
Den här inställningen fungerar korrekt när du har valt Alla molnappar
\n
Det här påverkar inte tokenlivstider eller inställningen av inloggningsfrekvens.
\n
Det här åsidosätter principen Visa alternativ att fortsätta vara inloggad i Företagsanpassning.
\n
Inställningen Aldrig beständig åsidosätter alla beständiga anspråk för enkel inloggning som skickas från federerade autentiseringstjänster.
\n
Inställningen Aldrig beständig förhindrar enkel inloggning på mobila enheter för alla program och mellan program och användarens mobila webbläsare.
\n",
- "label": "Beständig webbläsarsession",
- "never": "Aldrig beständig"
- },
- "Warning": {
- "allApps": "En beständig webbläsarsession fungerar bara korrekt när Alla molnappar har valts. Ändra valet för dina molnappar. Klicka här för att läsa mer."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Timmar eller dagar",
- "value": "Frekvens"
- },
- "Option": {
- "Day": {
- "plural": "{0} dagar",
- "singular": "1 dag"
- },
- "Hour": {
- "plural": "{0} timmar",
- "singular": "1 timme"
- },
- "daysOption": "Dagar",
- "everytime": "Varje gång",
- "help": "Tidsperiod innan en användare uppmanas att logga in igen när de försöker komma åt en resurs. Standardinställningen är ett rullande fönster på 90 dagar, d.v.s. användare ombeds återautentisera sig vid det första försöket att komma åt en resurs efter att ha varit inaktiva på sin dator i 90 dagar eller längre.",
- "hoursOption": "Timmar",
- "label": "Inloggningsfrekvens",
- "placeholder": "Välj enheter "
- }
- },
- "mainOption": "Ändra sessionens livstid",
- "mainOptionHelp": "Konfigurera hur ofta användare tillfrågas och om webbläsarsessioner är beständiga. Program som inte stöder moderna autentiseringsprotokoll kanske inte tar hänsyn till dessa principer. Kontakta i sådana fall programutvecklaren."
- },
- "SingleSelectorActive": {
- "failed": "Det gick inte att läsa in den här informationen.",
- "reattempt": "Läser in data. Försök igen med {0} av {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Välj katalogroller"
- },
- "Excluded": {
- "gridAria": "Lista över exkluderade användare"
- },
- "Included": {
- "gridAria": "Lista över inkluderade användare"
- },
- "Validation": {
- "customRoleIncluded": "\"Katalogroller\" innehåller minst en anpassad roll",
- "customRoleSelected": "Minst en anpassad roll har valts",
- "failed": "{0} måste konfigureras",
- "roles": "Välj minst en roll",
- "usersGroups": "Välj minst en användare eller grupp"
- },
- "learnMore": "Kontrollera åtkomst baserat på vem principen gäller för, till exempel användare och grupper, arbetsbelastningsidentiteter, katalogroller eller externa gäster."
- },
- "advancedTabText": "Avancerad",
- "allCloudAppsErrorBox": "Du måste välja \"Alla molnappar\" när beviljandet \"Tillåt lösenordsändring\" har valts",
- "allCloudAppsReauth": "”Alla molnappar” måste ha valts när sessionskontrollen ”Inloggningsfrekvens varje gång” och villkoret ”Inloggningsrisk” har valts",
- "allCloudOrSpecificApps": "Sessionskontrollen Inloggningsfrekvens varje gång kräver att Alla molnappar eller appar som specifikt stöds har valts",
- "allDayCheckboxLabel": "Dygnet runt",
- "allDevicePlatforms": "Valfri enhet",
- "allGuestUserInfoContent": "Omfattar Microsoft Entra B2B-gäster men inte SharePoint B2B-gäster",
- "allGuestUserLabel": "Alla gästanvändare och externa användare",
- "allRiskLevelsOption": "Alla risknivåer",
- "allTrustedLocationLabel": "Alla betrodda platser",
- "allUserGroupSetSelectorLabel": "Alla användare och grupper har valts",
- "allUsersReauth": "Sessionskontrollen Inloggningsfrekvens varje gång kräver att Alla användare har valts",
- "allUsersString": "Alla användare",
- "and": "{0} OCH {1}",
- "andWithGrouping": "({0}) och {1}",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Valfri molnapp",
- "appContextOptionInfoContent": "Begärd autentiseringstagg",
- "appContextOptionLabel": "Begärd autentiseringstagg (förhandsversion)",
- "appContextUriPlaceholder": "Exempel: uri:contoso.com:level3",
- "appEnforceInfoBubble": "App-framtvingade begränsningar kan kräva ytterligare administratörskonfigurationer inom molnapparna. Begränsningarna börjar bara gälla för nya sessioner.",
- "appNotSetSeletorLabel": "0 molnappar valda",
- "appReauthNotSupported": "Den här appen stöder inte sessionskontrollen Inloggningsfrekvens varje gång.",
- "applyConditionClientAppInfoBalloonContent": "Konfigurera klientapparna för att tillämpa principen på specifika klientappar",
- "applyConditionDevicePlatformInfoBalloonContent": "Konfigurera enhetsplattformarna för att tillämpa principen för specifika plattformar",
- "applyConditionDeviceStateInfoBalloonContent": "Konfigurera enhetstillståndet att tillämpa principen för specifika enhetstillstånd",
- "applyConditionLocationInfoBalloonContent": "Konfigurera platserna för att tillämpa principen för betrodda/icke-betrodda platser",
- "applyConditionSigninRiskInfoBalloonContent": "Konfigurera inloggningsrisken för att tillämpa principen för specifika risknivåer",
- "applyConditionUserRiskInfoBalloonContent": "Konfigurera den användarrisk som ska tillämpa principen på valda risknivåer",
- "applyConditonLabel": "Konfigurera",
- "ariaLabelPolicyDisabled": "Hanteringsprincipregeln (MPR) är inaktiverad",
- "ariaLabelPolicyEnabled": "Principen är aktiverad",
- "ariaLabelPolicyReportOnly": "Principen är i rapportexklusivt läge",
- "blockAccess": "Blockera åtkomst",
- "builtInDirectoryRoleLabel": "Inbyggda katalogroller",
- "casCustomControlInfo": "Anpassade principer måste konfigureras i Cloud App Security-portalen. Den här kontrollen fungerar direkt för aktuella appar och kan installeras automatiskt för alla appar. Klicka här om du vill läsa mer om båda scenarierna.",
- "casInfoBubble": "Den här kontrollen fungerar för olika molnappar.",
- "casPreconfiguredControlInfo": "Den här kontrollen fungerar direkt för aktuella appar och kan installeras automatiskt för alla appar. Klicka här om du vill läsa mer om båda scenarierna.",
- "cert64DownloadCol": "Ladda ned base64-certifikat",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Hämta certifikat",
- "certDurationCol": "Förfallodatum",
- "certDurationStartCol": "Giltigt från",
- "certName": "VpnCert",
- "certainApps": "Endast appar som specifikt stöds är aktiverade för Inloggningsfrekvens varje gång om beviljandena Kräv multifaktorautentisering och Kräv lösenordsändring inte har valts",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Välj program",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Valda program",
- "chooseApplicationsEmpty": "Inga program",
- "chooseApplicationsNone": "Ingen",
- "chooseApplicationsNoneFound": "Vi hittade inte \"{0}\". Försök med ett annat namn eller ID.",
- "chooseApplicationsPlural": "{0} och {1} till",
- "chooseApplicationsReAuthEverytimeInfo": "Letar du efter din app? Vissa program kan inte användas med sessionskontrollen Kräv omautentisering – varje gång",
- "chooseApplicationsRemove": "Ta bort",
- "chooseApplicationsReturnedPlural": "{0} program hittades",
- "chooseApplicationsReturnedSingular": "1 program hittades",
- "chooseApplicationsSearchBalloon": "Sök efter ett program genom att ange dess namn eller ID.",
- "chooseApplicationsSearchHint": "Sök program...",
- "chooseApplicationsSearchLabel": "Program",
- "chooseApplicationsSearching": "Söker...",
- "chooseApplicationsSelect": "Välj",
- "chooseApplicationsSelected": "Vald",
- "chooseApplicationsSingular": "{0} och 1 till",
- "chooseApplicationsTooMany": "Fler resultat än vad som kan visas. Filtrera med sökrutan.",
- "chooseLocationCorpnetItem": "Företagsnätverk",
- "chooseLocationSelectedLocationsLabel": "Valda platser",
- "chooseLocationTrustedIpsItem": "Betrodda IP-adresser för multifaktorautentisering",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Välj platser",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Valda platser",
- "chooseLocationsEmpty": "Inga platser",
- "chooseLocationsExcludedSelectorTitle": "Markera",
- "chooseLocationsIncludedSelectorTitle": "Markera",
- "chooseLocationsNone": "Ingen",
- "chooseLocationsNoneFound": "Vi hittade inte \"{0}\". Försök med ett annat namn eller ID.",
- "chooseLocationsPlural": "{0} och {1} till",
- "chooseLocationsRemove": "Ta bort",
- "chooseLocationsReturnedPlural": "{0} platser hittades",
- "chooseLocationsReturnedSingular": "1 plats hittades",
- "chooseLocationsSearchBalloon": "Sök efter en plats genom att ange dess namn.",
- "chooseLocationsSearchHint": "Sök efter platser...",
- "chooseLocationsSearchLabel": "Sökvägar",
- "chooseLocationsSearching": "Söker...",
- "chooseLocationsSelect": "Markera",
- "chooseLocationsSelected": "markerat",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Markera",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Markera",
- "chooseLocationsSingular": "{0} och 1 till",
- "chooseLocationsTooMany": "Fler resultat än vad som kan visas. Filtrera med sökrutan.",
- "claimProviderAddCommandText": "Ny anpassad kontroll",
- "claimProviderAddNewBladeTitle": "Ny anpassad kontroll",
- "claimProviderDeleteCommand": "Ta bort",
- "claimProviderDeleteDescription": "Vill du ta bort {0}? Du kan inte ångra den här åtgärden.",
- "claimProviderDeleteTitle": "Är du säker?",
- "claimProviderEditInfoText": "Ange JSON för anpassade kontroller som du fått av dina anspråksproviders.",
- "claimProviderNotificationCreateDescription": "Skapar en anpassad kontroll som heter {0}",
- "claimProviderNotificationCreateFailedDescription": "Det gick inte att skapa den anpassade kontrollen {0}. Försök igen senare.",
- "claimProviderNotificationCreateFailedTitle": "Det gick inte att skapa den anpassade kontrollen",
- "claimProviderNotificationCreateSuccessDescription": "Den anpassade kontrollen {0} skapades",
- "claimProviderNotificationCreateSuccessTitle": "{0} har skapats",
- "claimProviderNotificationCreateTitle": "{0} skapas",
- "claimProviderNotificationDeleteDescription": "Tar bort den anpassade kontrollen som heter {0}",
- "claimProviderNotificationDeleteFailedDescription": "Det gick inte att ta bort den anpassade kontrollen {0}. Försök igen senare.",
- "claimProviderNotificationDeleteFailedTitle": "Det gick inte att ta bort den anpassade kontrollen",
- "claimProviderNotificationDeleteSuccessDescription": "Den anpassade kontrollen som heter {0} togs bort",
- "claimProviderNotificationDeleteSuccessTitle": "{0} har tagits bort",
- "claimProviderNotificationDeleteTitle": "Tar bort {0}",
- "claimProviderNotificationUpdateDescription": "Uppdaterar den anpassade kontrollen som heter {0}",
- "claimProviderNotificationUpdateFailedDescription": "Det gick inte att uppdatera den anpassade kontrollen {0}. Försök igen senare.",
- "claimProviderNotificationUpdateFailedTitle": "Det gick inte att uppdatera den anpassade kontrollen",
- "claimProviderNotificationUpdateSuccessDescription": "Den anpassade kontrollen som heter {0} uppdaterades",
- "claimProviderNotificationUpdateSuccessTitle": "{0} har uppdaterats",
- "claimProviderNotificationUpdateTitle": "Uppdaterar {0}",
- "claimProviderValidationAppIdInvalid": "AppId-värdet är inte giltigt. Granska det och försök igen.",
- "claimProviderValidationClientIdMissing": "Data saknar ett ClientId-värde. Granska och försök igen.",
- "claimProviderValidationControlClaimsRequestedMissing": "Kontrollen saknar ett ClaimsRequested-värde. Granska och försök igen.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "Objektet ClaimsRequested saknar ett Typ-värde. Granska och försök igen.",
- "claimProviderValidationControlIdAlreadyExists": "Kontroll Id-värdet finns redan. Granska och försök igen.",
- "claimProviderValidationControlIdMissing": "Kontroll saknar ett Id-värde. Granska och försök igen.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "Kontroll Id-värdet kan inte tas bort eftersom det refereras till i en befintlig princip. Ta bort det från principen först.",
- "claimProviderValidationControlIdTooManyControls": "Egenskapen Control har för många kontroller. Granska och försök igen.",
- "claimProviderValidationControlIdValueReserved": "Kontroll Id-värdet är ett reserverat nyckelord. Använd ett annat id.",
- "claimProviderValidationControlNameAlreadyExists": "Kontroll Namn-värdet finns redan. Granska och försök igen.",
- "claimProviderValidationControlNameMissing": "Kontroll saknar ett Namn-värde. Granska och försök igen.",
- "claimProviderValidationControlsMissing": "Data saknar ett Kontroller-värde. Granska och försök igen.",
- "claimProviderValidationDiscoveryUrlMissing": "Data saknnar ett DiscoveryUrl-värde. Granska och försök igen.",
- "claimProviderValidationInvalid": "De data som angetts är inte giltiga. Granska och försök igen.",
- "claimProviderValidationInvalidJsonDefinition": "Det går inte att spara den anpassade kontrollen. Granska JSON-texten och försök igen.",
- "claimProviderValidationNameAlreadyExists": "Namn-värdet finns redan. Granska och försök igen.",
- "claimProviderValidationNameMissing": "Data saknar ett Namn-värde. Granska och försök igen.",
- "claimProviderValidationUnknown": "Ett okänt fel uppstod vid validering av angivna data. Granska och försök igen.",
- "claimProvidersNone": "Inga anpassade kontroller",
- "claimProvidersSearchPlaceholder": "Genomsök kontroller.",
- "classicPoilcyFilterTitle": "Visa",
- "classicPolicyAllPlatforms": "Alla plattformar",
- "classicPolicyClientAppBrowserAndNative": "Webbläsare, mobilappar och stationära klienter",
- "classicPolicyCloudAppTitle": "Molnprogram",
- "classicPolicyControlAllow": "Tillåt",
- "classicPolicyControlBlock": "Blockera",
- "classicPolicyControlBlockWhenNotAtWork": "Blockera åtkomst när du inte arbetar",
- "classicPolicyControlRequireCompliantDevice": "Kräv kompatibel enhet",
- "classicPolicyControlRequireDomainJoinedDevice": "Kräv domänansluten enhet",
- "classicPolicyControlRequireMfa": "Kräv multifaktorautentisering",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Kräv multifaktorautentisering när du inte arbetar",
- "classicPolicyDeleteCommand": "Ta bort",
- "classicPolicyDeleteFailTitle": "Det gick inte att ta bort den klassiska principen",
- "classicPolicyDeleteInProgressTitle": "Den klassiska principen tas bort",
- "classicPolicyDeleteSuccessTitle": "Den klassiska principen har tagits bort",
- "classicPolicyDetailBladeTitle": "Information",
- "classicPolicyDisableCommand": "Inaktivera",
- "classicPolicyDisableConfirmation": "Är du säker på att du vill inaktivera {0}? Du kan inte ångra den här åtgärden.",
- "classicPolicyDisableFailDescription": "Det gick inte att inaktivera {0}",
- "classicPolicyDisableFailTitle": "Det gick inte att inaktivera den klassiska principen",
- "classicPolicyDisableInProgressDescription": "Inaktiverar {0}",
- "classicPolicyDisableInProgressTitle": "Den klassiska principen inaktiveras",
- "classicPolicyDisableSuccessDescription": "{0} har inaktiverats",
- "classicPolicyDisableSuccessTitle": "Den klassiska principen har inaktiverats",
- "classicPolicyEasSupportedPlatforms": "Plattformar som stöds av Exchange ActiveSync",
- "classicPolicyEasUnsupportedPlatforms": "Plattformar som inte stöds av Exchange ActiveSync",
- "classicPolicyExcludedPlatformsTitle": "Exkluderade enhetsplattformar",
- "classicPolicyFilterAll": "Alla principer",
- "classicPolicyFilterDisabled": "Inaktiverade principer",
- "classicPolicyFilterEnabled": "Aktiverade principer",
- "classicPolicyIncludeExcludeMembersDescription": "Du kan utföra fasindelad principmigrering genom att exkludera grupper.",
- "classicPolicyIncludeExcludeMembersTitle": "Inkludera/exkludera grupper",
- "classicPolicyIncludedPlatformsTitle": "Inkluderade enhetsplattformar",
- "classicPolicyManualMigrationMessage": "Den här principen måste migreras manuellt.",
- "classicPolicyMigrateCommand": "Migrera",
- "classicPolicyMigrateConfirmation": "Är du säker på att du vill migrera {0}? Den här principen kan bara migreras en gång.",
- "classicPolicyMigrateFailDescription": "Det gick inte att migrera {0}",
- "classicPolicyMigrateFailTitle": "Det gick inte att migrera den klassiska principen",
- "classicPolicyMigrateInProgressDescription": "Migrerar {0}",
- "classicPolicyMigrateInProgressTitle": "Den klassiska principen migreras",
- "classicPolicyMigrateRecommendText": "Rekommendation: Migrera till de nya Azure-portalprinciperna.",
- "classicPolicyMigrateSuccessTitle": "Den klassiska principen har migrerats",
- "classicPolicyMigratedSuccessDescription": "Den klassiska principen kan nu hanteras under principer.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "Den här klassiska principen migreras som {0} nya principer. Nya principer kan hanteras under principer.",
- "classicPolicyNoEditPermissionMsg": "Du har inte behörighet att redigera den här principen. Endast globala administratörer eller säkerhetsadministratörer kan redigera principen. Klicka här för mer information.",
- "classicPolicySaveFailDescription": "Det gick inte att spara {0}",
- "classicPolicySaveFailTitle": "Det gick inte att spara den klassiska principen",
- "classicPolicySaveInProgressDescription": "Sparar {0}",
- "classicPolicySaveInProgressTitle": "Den klassiska principen sparas",
- "classicPolicySaveSuccessDescription": "{0} har sparats",
- "classicPolicySaveSuccessTitle": "Den klassiska principen har sparats",
- "clientAppBladeLegacyInfoBanner": "Bakåtkompatibel autentisering stöds inte för tillfället",
- "clientAppBladeLegacyUpsellBanner": "Blockera klientappar utan support (förhandsversion)",
- "clientAppBladeTitle": "Klientappar",
- "clientAppDescription": "Välj de klientappar som den här principen ska gälla för",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync stöder inte alla andra villkor",
- "clientAppLearnMore": "Kontrollera användaråtkomsten med fokus på särskilda klientprogram som inte använder modern autentisering.",
- "clientAppLegacyHeader": "Äldre autentiseringsklienter",
- "clientAppMobileDesktop": "Mobila appar och skrivbordsklienter",
- "clientAppModernHeader": "Moderna autentiseringsklienter",
- "clientAppOnlySupportedPlatforms": "Tillämpa bara principen på plattformar som stöds",
- "clientAppSelectSpecificClientApps": "Välj klientappar",
- "clientAppWebBrowser": "Webbläsare",
- "clientAppsSelectedLabel": "{0} inkluderade",
- "clientTypeBrowser": "Webbläsare",
- "clientTypeEas": "Exchange ActiveSync-klienter",
- "clientTypeEasInfo": "Exchange ActiveSync-klienter som enbart använder äldre autentisering.",
- "clientTypeModernAuth": "Moderna autentiseringsklienter",
- "clientTypeOtherClients": "Övriga klienter",
- "clientTypeOtherClientsInfo": "Detta omfattar äldre Office-klienter och andra e-postprotokoll (POP, IMAP, SMTP osv). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "{0} molnappar som konfigurerats i den här principen har tagits bort från katalogen, men detta påverkar inte andra program i principen. Nästa gång som du uppdaterar programavsnittet i principen tas de borttagna apparna automatiskt bort från den.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Alla Microsoft-appar",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Tillåt Microsofts molnappar, skrivbordsappar och mobilappar (förhandsversion)",
- "cloudappsSelectionBladeAllCloudapps": "Alla molnappar",
- "cloudappsSelectionBladeExcludeDescription": "Välj vilka molnappar som ska undantas principen",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Välj exkluderade molnappar",
- "cloudappsSelectionBladeIncludeDescription": "Välj de molnappar som den här principen ska gälla för",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Välj",
- "cloudappsSelectionBladeSelectedCloudapps": "Välj appar",
- "cloudappsSelectorInfoBallonText": "Tjänster som användaren har åtkomst till för att göra sitt arbete. Exempelvis Salesforce",
- "cloudappsSelectorPluralExcluded": "{0} appar som undantas",
- "cloudappsSelectorPluralIncluded": "{0} appar ingår",
- "cloudappsSelectorSingularExcluded": "1 app undantas",
- "cloudappsSelectorSingularIncluded": "1 app ingår",
- "cloudappsSelectorUserPlural": "{0} appar",
- "cloudappsSelectorUserSingular": "1 app",
- "conditionLabelMulti": "{0} villkor valda",
- "conditionLabelOne": "1 villkor valt",
- "conditionalAccessBladeTitle": "Villkorad åtkomst",
- "conditionsNotSelectedLabel": "Inte konfigurerad",
- "conditionsReqMfaReauthSet": "Vissa alternativ är inte tillgängliga på grund av beviljandet Kräv multifaktorautentisering och sessionskontrollen ”inloggningsfrekvens varje gång” har valts",
- "conditionsReqPwSet": "Vissa alternativ är inte tillgängliga pga att beviljandet \"Kräv lösenordsändring\" har valts",
- "configureCasText": "Konfigurera Cloud App Security",
- "configureCustomControlsText": "Konfigurera anpassad princip",
- "controlLabelMulti": "{0} kontroller valda",
- "controlLabelOne": "1 kontroll vald",
- "controlValidatorText": "Välj minst en kontroll",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Läs mer om att kräva kompatibla enheter.",
- "controlsDeviceComplianceInfoBubble": "Enheten måste vara Intune-kompatibel. Om enheten inte är kompatibel ombeds användaren att göra enheten kompatibel.",
- "controlsDomainJoinedAriaLabel": "Läs mer om att kräva Microsoft Entra-hybridanslutna enheter.",
- "controlsDomainJoinedInfoBubble": "Enheter måste vara Microsoft Entra-hybridanslutna.",
- "controlsMamAriaLabel": "Läs mer om att kräva godkända klientprogram.",
- "controlsMamInfoBubble": "Enheten måste använda de här godkända programmen.",
- "controlsMfaInfoBubble": "Användaren måste slutföra ytterligare säkerhetskrav, exempelvis ett telefonsamtal eller textmeddelande",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Läs mer om att kräva principskyddade appar.",
- "controlsRequireCompliantAppInfoBubble": "Enheten måste använda principskyddade appar.",
- "controlsRequirePasswordResetAriaLabel": "Läs mer om att kräva en lösenordsändring.",
- "controlsRequirePasswordResetInfoBubble": "Minska användarrisken genom att kräva lösenordsändring. Det här alternativet kräver också multifaktorautentisering. Det går inte att använda övriga kontroller.",
- "countriesRadiobuttonInfoBalloonContent": "Landet/regionen som en inloggning kommer från fastställs av användarens IP-adress.",
- "createNewVpnCert": "Nytt certifikat",
- "createdTimeLabel": "Skapandetid",
- "customRoleLabel": "Anpassade roller (stöds inte)",
- "dateRangeTypeLabel": "Datumintervall",
- "daysOfWeekPlaceholderText": "Filtrera veckodagarna",
- "daysOfWeekTypeLabel": "Veckodagar",
- "deletePolicyNoLicenseText": "Du kan ta bort den här principen nu. När den väl är borttagen kan du inte återskapa den förrän du har de licenser som krävs.",
- "descriptionContentForControlsAndOr": "För flera kontroller",
- "devicePlatform": "Enhetsplattform",
- "devicePlatformConditionHelpDescription": "Tillämpa principen för valda enhetsplattformar.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} inkluderade",
- "devicePlatformIncludeExclude": "{0} och {1} exkluderades",
- "devicePlatformNoSelectionError": "Om du ska välja enhetsplattformar måste du först välja ett underordnat objekt.",
- "devicePlatformsNone": "Ingen",
- "deviceSelectionBladeExcludeDescription": "Välj plattformar som ska undantas principen",
- "deviceSelectionBladeIncludeDescription": "Välj enhetsplattformarna att inkludera i den här principen",
- "deviceStateAll": "Alla enhetstillstånd",
- "deviceStateCompliant": "Enheten markerades som kompatibel",
- "deviceStateCompliantInfoContent": "Enheter som är Intune-kompatibla kommer att uteslutas från bedömningen av den här principen så att om principen blockerar åtkomst till exempel så blockeras alla enheter utom de som är Intune-kompatibla.",
- "deviceStateConditionConfigureInfoContent": "Konfigurera princip baserat på enhetstillstånd",
- "deviceStateConditionSelectorInfoContent": "Huruvida den enhet som användaren loggar in från är Microsoft Entra-hybridansluten eller markerad som kompatibel.\n Det här har tagits ur bruk. Använd {1} istället.",
- "deviceStateConditionSelectorLabel": "Enhetstillstånd (ur bruk)",
- "deviceStateDomainJoined": "Microsoft Entra-hybridansluten enhet",
- "deviceStateDomainJoinedInfoContent": "Enheter som är Microsoft Entra-hybridanslutna utesluts från utvärderingen av den här policyn. Så om policyn t.ex. blockerar åtkomst, blockeras alla enheter utom de som är Microsoft Entra-hybridanslutna.",
- "deviceStateDomainJoinedInfoLinkText": "Läs mer.",
- "deviceStateExcludeDescription": "Välj det enhetstillståndsvillkor som används för att utesluta enheter från principen.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} och uteslut {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} och uteslut {1}, {2}",
- "directoryRoleInfoContent": "Tilldela inbyggda katalogroller en princip.",
- "directoryRolesLabel": "Katalogroller",
- "discardbutton": "Ta bort",
- "downloadDefaultFileName": "IP-intervall",
- "downloadExampleFileName": "Exempel",
- "downloadExampleHeader": "Detta är en exempelfil med demonstationer av de typer av data som kan godkännas. Rader som börjar med # ignoreras.",
- "duplicate": "Duplicera",
- "duplicatePolicyName": "{0} KOPIERA",
- "endDatePickerLabel": "Slutar",
- "endTimePickerLabel": "Sluttid",
- "enterCountryText": "IP-adress och land/region utvärderas parvis. Välj land.",
- "enterIpText": "IP-adress och land/region utvärderas parvis. Ange IP-adressen.",
- "enterUserText": "Ingen användare har valts. Välj en användare.",
- "evaluationResult": "Utvärderingsresultat",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync enbart med plattformar som stöds",
- "excludeAllTrustedLocationSelectorText": "alla betrodda platser",
- "featureRequiresP2": "Den här funktionen kräver Microsoft Entra ID P2-licens.",
- "friday": "fredag",
- "grantControls": "Bevilja kontroller",
- "gridNetworkTrusted": "Betrodda",
- "gridPolicyCreatedDateTime": "Skapandedatum",
- "gridPolicyEnabled": "Aktiverad",
- "gridPolicyModifiedDateTime": "Ändringsdatum",
- "gridPolicyName": "Principnamn",
- "gridPolicyState": "Tillstånd",
- "groupSelectionBladeExcludeDescription": "Välj de grupper som ska undantas från principen",
- "groupSelectionBladeExcludedSelectorTitle": "Välj exkluderade grupper",
- "groupSelectionBladeSelect": "Välj grupper",
- "groupSelectorInfoBallonText": "De användare och grupper i katalogen som principen tillämpas på. Exempel: pilotgrupp",
- "groupsSelectionBladeTitle": "Grupper",
- "helpCommonScenariosText": "Är du intresserad av några vanliga scenarion?",
- "helpCondition1": "När en användare befinner sig utanför företagets nätverk",
- "helpCondition2": "När användare i gruppen Chefer loggar in",
- "helpConditionsTitle": "Villkor",
- "helpControl1": "De måste logga in med multifaktorautentisering",
- "helpControl2": "De måste arbeta från en Intune-kompatibel eller domänansluten enhet",
- "helpControlsTitle": "Kontroller",
- "helpIntroText": "Med villkorsstyrd åtkomst kan du framtvinga åtkomstkrav under vissa förhållanden. Här följer några exempel",
- "helpIntroTitle": "Vad är villkorsstyrd åtkomst?",
- "helpLearnMoreText": "Vill du veta mer om villkorsstyrd åtkomst?",
- "helpStartStep1": "Skapa din första princip genom att klicka på \"+ Ny princip\"",
- "helpStartStep2": "Ange princip Villkor och kontroller",
- "helpStartStep3": "Glöm inte att aktivera principen och skapa när du är klar",
- "helpStartTitle": "Kom igång",
- "highRisk": "Hög",
- "includeAndExcludeAppsTextFormat": "Inkludera: {0}. Exkludera: {1}.",
- "includeAppsTextFormat": "Inkluderra: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Okända områden är IP-adresser som inte kan mappas till ett land/region.",
- "includeUnknownAreasCheckboxLabel": "Inkludera okända områden",
- "infoCommandLabel": "Info",
- "invalidCertDuration": "Ogiltig varaktighet för certifikat",
- "invalidIpAddress": "Värdet måste vara en giltig IP-adress",
- "invalidReAuthSignInRiskOptionSelected": "Sessionskontrollen “inloggningsfrekvens varje gång” tillåter inte alternativet “ingen risk” i villkorskontrollen “inloggningsrisk”.",
- "invalidUriErrorMsg": "Ange en giltig URI. Till exempel, uri:contoso.com:acr",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Läs in alla",
- "loading": "Laddar...",
- "locationConfigureNamedLocationsText": "Konfigurera alla betrodda platser",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Platsnamnet är för långt. Maximalt antal tecken är 256",
- "locationSelectionBladeExcludeDescription": "Välj de platser som ska undantas principen",
- "locationSelectionBladeIncludeDescription": "Välj platserna att inkludera i den här principen",
- "locationsAllLocationsLabel": "Vilken plats som helst",
- "locationsAllNamedLocationsLabel": "Alla betrodda IP-adresser",
- "locationsAllPrivateLinksLabel": "Alla privata länkar i min klientorganisation",
- "locationsIncludeExcludeLabel": "{0} och uteslut alla betrodda IP-adresser",
- "locationsSelectedPrivateLinksLabel": "Valda privata länkar",
- "lowRisk": "Låg",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "Om du vill hantera principer för villkorsstyrd åtkomst måste organisationen ha Microsoft Entra ID P1 eller P2.",
- "manageSecurityDefaultsAriaLabel": "Hantera standardsäkerhetsinställningarna.",
- "markAsTrustedCheckboxInfoBalloonContent": "Inloggning från en betrodd plats sänker en användares inloggningsrisk. Markera bara den här platsen som betrodd om du känner till att de IP-intervall som angetts är etablerade och trovärdiga inom din organisation.",
- "markAsTrustedCheckboxLabel": "Markera som betrodd plats",
- "mediumRisk": "Medel",
- "memberSelectionCommandRemove": "Ta bort",
- "menuItemClaimProviderControls": "Anpassade kontroller (förhandsversion)",
- "menuItemClassicPolicies": "Klassiska principer",
- "menuItemInsightsAndReporting": "Insikter och rapportering",
- "menuItemManage": "Hantera",
- "menuItemNamedLocationsPreview": "Namngivna platser (förhandsversion)",
- "menuItemNamedNetworks": "Namngivna platser",
- "menuItemPolicies": "Principer",
- "menuItemTermsOfUse": "Användningsvillkor",
- "modifiedTimeLabel": "Ändrad tid",
- "monday": "måndag",
- "nameLabel": "Namn",
- "namedLocationCountryInfoBanner": "Endast IPv4-adresser mappas till länder/regioner. IPv6-adresser ingår i okända länder/regioner.",
- "namedLocationTypeCountry": "Länder/regioner",
- "namedLocationTypeLabel": "Definiera platsen med:",
- "namedLocationUpsellBanner": "Den här vyn är inaktuell. Gå till den nya och förbättrade vyn Namngivna platser.",
- "namedLocationsHelpDescription": "Namngivna platser används av Microsoft Entra ID-säkerhetsrapporter för att minska falskt positiva resultat och Microsoft Entra-principer för villkorsstyrd åtkomst.\n[Läs mer][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Lägg till ett nytt IP-intervall (t.ex. 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "Du måste välja minst ett land/en region",
- "namedNetworkDeleteCommand": "Ta bort",
- "namedNetworkDeleteDescription": "Vill du ta bort {0}? Du kan inte ångra den här åtgärden.",
- "namedNetworkDeleteTitle": "Är du säker?",
- "namedNetworkDownloadIpRange": "Hämta",
- "namedNetworkInvalidRange": "Värdet måste vara ett giltigt IP-intervall.",
- "namedNetworkIpRangeNeeded": "Du behöver minst ett giltig IP-intervall",
- "namedNetworkIpRangesDescriptionContent": "Konfigurera IP-intervallen för din organisation",
- "namedNetworkIpRangesTab": "IP-intervall",
- "namedNetworkListAdd": "Ny plats",
- "namedNetworkListConfigureTrustedIps": "Ställ in betrodda IP-adresser för multifaktorautentisering",
- "namedNetworkNameDescription": "Exempelvis: Redmondkontoret",
- "namedNetworkNameInvalid": "Det tillhandahållna namnet är ogiltigt.",
- "namedNetworkNameRequired": "Du måste tillhandahålla ett namn för den här platsen.",
- "namedNetworkNoIpRanges": "Inga IP-intervall",
- "namedNetworkNotificationCreateDescription": "Skapa en plats med namnet {0}",
- "namedNetworkNotificationCreateFailedDescription": "Det gick inte att skapa {0}. Försök igen senare.",
- "namedNetworkNotificationCreateFailedTitle": "Det gick inte att skapa platsen",
- "namedNetworkNotificationCreateSuccessDescription": "En plats med namnet {0} har skapats",
- "namedNetworkNotificationCreateSuccessTitle": "{0} har skapats",
- "namedNetworkNotificationCreateTitle": "{0} skapas",
- "namedNetworkNotificationDeleteDescription": "Platsen med namnet {0} tas bort",
- "namedNetworkNotificationDeleteFailedDescription": "Det gick inte att ta bort {0}. Försök igen senare.",
- "namedNetworkNotificationDeleteFailedTitle": "Det gick inte att ta bort platsen",
- "namedNetworkNotificationDeleteSuccessDescription": "Platsen med namnet {0} har tagits bort",
- "namedNetworkNotificationDeleteSuccessTitle": "{0} har tagits bort",
- "namedNetworkNotificationDeleteTitle": "Tar bort {0}",
- "namedNetworkNotificationUpdateDescription": "Platsen med namnet {0} uppdateras",
- "namedNetworkNotificationUpdateFailedDescription": "Det gick inte att ta bort platsen {0}. Försök igen senare.",
- "namedNetworkNotificationUpdateFailedTitle": "Det gick inte att uppdatera platsen",
- "namedNetworkNotificationUpdateSuccessDescription": "Platsen med namnet {0} har uppdaterats",
- "namedNetworkNotificationUpdateSuccessTitle": "{0} har uppdaterats",
- "namedNetworkNotificationUpdateTitle": "Uppdaterar {0}",
- "namedNetworkSearchPlaceholder": "Sök efter platser.",
- "namedNetworkUploadFailedDescription": "Ett fel inträffade när den tillhandahållna filen skulle parsas. Se till att ladda upp en oformaterad textfil där varje rad är i CIDR-format.",
- "namedNetworkUploadFailedTitle": "Det gick inte att tolka {0}",
- "namedNetworkUploadInProgressDescription": "Försöker parsa giltiga CIDR-värden från {0}.",
- "namedNetworkUploadInProgressTitle": "{0} parsas",
- "namedNetworkUploadInvalidDescription": "{0} är antingen för stor eller har ett ogiltigt format.",
- "namedNetworkUploadInvalidTitle": "{0} Ogiltig",
- "namedNetworkUploadIpRange": "Ladda upp",
- "namedNetworkUploadSuccessDescription": "{0} rader har analyserats. {1} har ett dåligt format. {2} hoppades över.",
- "namedNetworkUploadSuccessTitle": "Parsningen avslutades för {0}",
- "namedNetworksAdd": "Ny namngiven plats",
- "namedNetworksConditionHelpDescription": "Kontrollera användaråtkomst baserat på fysisk plats.\n[Läs mer][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} och {1} exkluderades",
- "namedNetworksHelpDescription": "Namngivna platser används av Microsoft Entra ID-säkerhetsrapporter för att minska falskt positiva resultat och Microsoft Entra-principer för villkorsstyrd åtkomst.\n[Läs mer][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} inkluderade",
- "namedNetworksNone": "Det gick inte att hitta några namgivna platser.",
- "namedNetworksTitle": "Konfigurera platser",
- "namednetworkExceedingSizeErrorBladeTitle": "Felinformation",
- "namednetworkExceedingSizeErrorDetailText": "Klicka här om du vill ha mer information.",
- "namednetworkExceedingSizeErrorMessage": "Du har överstigit det högsta tillåtna lagringsutrymmet för namngivna platser. Försök igen med en kortare lista. Klicka här för att se fler alternativ.",
- "needMfaSecondary": "Alternativet Kräv multifaktorautentisering måste vara valt när Inloggningsfrekvens varje gång väljs med Endast sekundära autentiseringsmetoder",
- "needMfaSpecificApps": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver beviljandekontrollen Kräv multifaktorautentisering när appar som särskilt stöds har valts",
- "newCertName": "nytt certifikat",
- "noAttributePermissionsError": "Du har inte den behörighet som krävs för att skapa eller uppdatera principen. Attributdefinitionsläsarroll krävs för att lägga till/redigera dynamiska filter.",
- "noPolicyRowMessage": "Inga principer",
- "noSPSelected": "Inget tjänsthuvudnamn har valts",
- "noUpdatePermissionMessage": "Du har inte behörigheter att uppdatera de här inställningarna. Be din globala administratör om att få åtkomst.",
- "noUserSelected": "Ingen användare har valts",
- "noneRisk": "Ingen risk",
- "office365Description": "Dessa appar är Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer och andra.",
- "office365InfoBox": "Minst en av de valda apparna ingår i Office 365. Vi rekommenderar att du konfigurerar principen i Office 365-appen i stället.",
- "oneUserSelected": "1 användare vald",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Endast globala administratörer kan spara den här policyn.",
- "or": "{0} ELLER {1}",
- "pickerDoneCommand": "Klart",
- "policiesBladeAdPremiumUpsellBannerText": "Skapa dina egna principer och målspecifika villkor som molnappar, inloggningsrisk och enhetsplattformar med Microsoft Entra ID Premium",
- "policiesBladeTitle": "Principer",
- "policiesBladeTitleWithAppName": "Principer: {0}",
- "policiesDisabledBannerText": "Att skapa och redigera principer är inte tillåtet för program med länkade inloggningsattribut.",
- "policiesHitMaxLimitStatusBarMessage": "Du har nått det maximala antalet principer för den här klientorganisationen. Ta bort några principer innan du skapar fler.",
- "policyAssignmentsSection": "Tilldelningar",
- "policyBlockAllInfoBox": "Den konfigurerade principen blockerar alla användare och stöds därmed inte. Granska tilldelningarna och kontrollerna. Exkludera den aktuella användaren {0} om du vill spara den här principen.",
- "policyCloudAppsDisplayTextAllApp": "Alla appar",
- "policyCloudAppsLabel": "Molnappar",
- "policyConditionClientAppDescription": "Programvaran som användaren använder för att komma åt molnappen. Exempelvis webbläsare",
- "policyConditionClientAppV2Description": "Programvaran som användaren använder för att komma åt molnappen. Exempelvis webbläsare",
- "policyConditionDevicePlatform": "Enhetsplattformar",
- "policyConditionDevicePlatformDescription": "Plattformen som användaren loggar in från. Exempelvis iOS",
- "policyConditionLocation": "Platser",
- "policyConditionLocationDescription": "Platsen (fastställs av IP-adressintervallet) som användaren loggar in från",
- "policyConditionLocationPreview": "Platser (förhandsversion)",
- "policyConditionSigninRisk": "Inloggningsrisk",
- "policyConditionSigninRiskDescription": "Sannolikhet att inloggningen kommer från någon annan än användaren. Risknivån kan vara hög, medel eller låg. Kräver en Microsoft Entra ID Premium 2-licens.",
- "policyConditionUserRisk": "Användarrisk",
- "policyConditionUserRiskDescription": "Konfigurera de användarrisknivåer som krävs för att principen ska tillämpas",
- "policyConditioniClientApp": "Klientappar",
- "policyControlAllowAccessDisplayedName": "Bevilja åtkomst",
- "policyControlAuthenticationStrengthDisplayedName": "Kräv autentiseringsstyrka (förhandsversion)",
- "policyControlBladeTitle": "Bevilja",
- "policyControlBlockAccessDisplayedName": "Blockera åtkomst",
- "policyControlCompliantDeviceDisplayedName": "Kräv att enheten är markerad som kompatibel",
- "policyControlContentDescription": "Kontrollera framtvingande av åtkomst för att blockera eller bevilja åtkomst.",
- "policyControlInfoBallonText": "Blockera åtkomst eller välj ytterligare krav som behöver uppfyllas för att tillåta åtkomst",
- "policyControlMfaChallengeDisplayedName": "Kräv multifaktorautentisering",
- "policyControlRequireCompliantAppDisplayedName": "Kräv appskyddsprincip",
- "policyControlRequireDomainJoinedDisplayedName": "Kräv Microsoft Entra-hybridanslutna enhet",
- "policyControlRequireMamDisplayedName": "Kräv godkänd klientapp",
- "policyControlRequiredPasswordChangeDisplayedName": "Kräv lösenordsändring",
- "policyControlSelectAuthStrength": "Kräv autentiseringsstyrka",
- "policyControlsNoControlsSelected": "0 kontroller valda",
- "policyControlsSection": "Åtkomstkontroller",
- "policyCreatBladeTitle": "Ny",
- "policyCreateButton": "Skapa",
- "policyCreateFailedMessage": "Fel: {0}",
- "policyCreateFailedTitle": "Det gick inte att skapa {0}",
- "policyCreateInProgressTitle": "{0} skapas",
- "policyCreateSuccessMessage": "{0} har skapats. Principen aktiveras om några minuter om du har gett Aktivera princip värdet På.",
- "policyCreateSuccessTitle": "{0} har skapats",
- "policyDeleteConfirmation": "Vill du ta bort {0}? Du kan inte ångra den här åtgärden.",
- "policyDeleteFailTitle": "Kunde inte ta bort {0}",
- "policyDeleteInProgressTitle": "Tar bort {0}",
- "policyDeleteSuccessTitle": "{0} togs bort.",
- "policyEnforceLabel": "Aktivera princip",
- "policyErrorCannotSetSigninRisk": "Du har inte behörighet att spara en princip med inloggningsriskvillkor.",
- "policyErrorNoPermission": "Du har inte behörighet att spara principen. Kontakta din globala administratör.",
- "policyErrorUnknown": "Något gick fel. Försök igen senare.",
- "policyFallbackWarningMessage": "Det gick inte att skapa eller uppdatera {0} med MS Graph vilket innebär att AD Graph återställs. Gå igenom följande scenario noggrant eftersom det troligen finns en bugg när principslutpunkten för MS Graph anropas med ett inkompatibelt villkor.",
- "policyFallbackWarningTitle": "{0} har delvis skapats eller uppdaterats",
- "policyNameCannotBeEmpty": "Principnamnet kan inte vara tomt",
- "policyNameDevice": "Enhetspolicy",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Mobilapphanteringspolicy",
- "policyNameMfaLocation": "Princip för multifaktorautentisering och plats",
- "policyNamePlaceholderText": "Exempelvis: App-princip för enhetskompatibilitet",
- "policyNameTooLongError": "Principnamnet är för långt. Max 256 tecken",
- "policyOff": "Av",
- "policyOn": "På",
- "policyReportOnly": "Endast rapport",
- "policyReviewSection": "Granska",
- "policySaveButton": "Spara",
- "policyStatusIconDescription": "Principen har aktiverats",
- "policyStatusIconEnabled": "Aktiverad statusikon",
- "policyTemplateName1": "Använd app-framtvingade begräsningar för {0} webbläsaråtkomst",
- "policyTemplateName2": "Tillåt enbart åtkomst för {0} på hanterade enheter",
- "policyTemplateName3": "Principen har migrerats från inställningarna för Kontinuerlig tillgänglighetskontroll",
- "policyTriggerRiskSpecific": "Välj specifik risknivå",
- "policyTriggersInfoBalloonText": "Villkor som definierar när principen ska tillämpas. Exempelvis plats",
- "policyTriggersNoConditionsSelected": "0 villkor valda",
- "policyTriggersSelectorLabel": "Villkor",
- "policyUpdateFailedMessage": "Fel: {0}",
- "policyUpdateFailedTitle": "Det gick inte att uppdatera {0}",
- "policyUpdateInProgressTitle": "Uppdaterar {0}",
- "policyUpdateSuccessMessage": "{0} har uppdaterats. Principen kommer att aktiveras om några minuter om du har satt \"aktivera princip\" till \"På\".",
- "policyUpdateSuccessTitle": "{0} har uppdaterats",
- "primaryCol": "Primär",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "Rapportspecifikt läge: Policyer utvärderas och loggas i samband med inloggningen, men de påverkar inte användarna.",
- "requireAllControlsText": "Begär alla de valda kontrollerna",
- "requireCompliantDevice": "Kräv kompatibel enhet",
- "requireDomainJoined": "Kräver domänansluten enhet",
- "requireGrantReauth": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver beviljandekontrollen Kräv multifaktorautentisering eller Kräv lösenordsändring när alternativet Alla molnappar har valts",
- "requireMFA": "Kräv multifaktorautentisering",
- "requireMfaReauth": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver beviljandekontrollen Kräv multifaktorautentisering för villkoret Inloggningsrisk",
- "requireOneControlText": "Begär en av de valda kontrollerna",
- "requirePasswordChangeReauth": "Sessionskontrollen Inloggningsfrekvens varje gång kräver beviljandekontrollen Kräv lösenordsändring för användarrisk.",
- "requireRiskReauth": "Sessionskontrollen Inloggningsfrekvens varje gång kräver sessionskontrollen Användarrisk eller Inloggningsrisk när Alla molnappar har valts.",
- "requireRiskReauthRiskNotEnabled": "Sessionskontrollen Inloggningsfrekvens varje gång, är inte tillgänglig när Alla molnappar har valts.",
- "requireRiskReauthSignInOnly": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver sessionskontrollen Inloggningsrisk när Alla molnappar har valts.",
- "requireRiskReauthUserOnly": "Sessionskontrollen Inloggningsfrekvens varje gång, kräver sessionskontrollen Användarrisk när Alla molnappar har valts.",
- "resetFilters": "Återställ filter",
- "sPRequired": "Tjänstens huvudnamn krävs",
- "sPSelectorInfoBalloon": "Användare eller tjänstens huvudnamn som du vill testa",
- "saturday": "lördag",
- "searchTextTooLongError": "Söktexten är för lång. Den får innehålla högst 256 tecken",
- "securityDefaultsPolicyName": "Standardinställningar för säkerhet",
- "securityDefaultsTextMessage": "Du måste inaktivera standardinställningarna för säkerhet för att kunna aktivera principen för villkorsstyrd åtkomst.",
- "securityDefaultsUpdateInProgressText": "En uppdatering av standardsäkerhetsinställningarna pågår. Vänta en stund och försök igen.",
- "securityDefaultsWarningMessage": "Det verkar som om du håller på att hantera organisationens säkerhetskonfigurationer. Vad bra! Innan du kan aktivera en princip för villkorsstyrd åtkomst måste du {0}inaktivera standardsäkerhetsinställningarna{1}.",
- "selectDevicePlatforms": "Välj enhetsplattformar",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Välj platser",
- "selectedSP": "Valt tjänsthuvudnamn",
- "servicePrincipalBladeExcludedSelectorTitle": "Välj undantagna tjänsthuvudnamn",
- "servicePrincipalBladeIncludedSelectorTitle": "Välj tjänsthuvudnamn",
- "servicePrincipalDataGridAria": "Lista över tillgängliga tjänsthuvudnamn",
- "servicePrincipalDropDownLabel": "Vad gäller den här principen för?",
- "servicePrincipalInfoBox": "Vissa villkor är inte tillgängliga på grund av valet {0} i principtilldelning",
- "servicePrincipalRadioAll": "Alla ägda tjänstens huvudnamn",
- "servicePrincipalRadioSelect": "Välj tjänsthuvudnamn",
- "servicePrincipalSelectionsAria": "Valt rutnät för tjänsthuvudnamn",
- "servicePrincipalSelectorAria": "Lista över valda tjänsthuvudnamn",
- "servicePrincipalSelectorMultiple": "{0} tjänsthuvudnamn har valts",
- "servicePrincipalSelectorSingle": "1 tjänsthuvudnamn har valts",
- "servicePrincipalSpecificExc": "Specifika tjänsthuvudnamn undantas",
- "servicePrincipalSpecificInc": "Specifika tjänsthuvudnamn ingår",
- "servicePrincipals": "Tjänsthuvudnamn",
- "sessionControlBladeTitle": "Session",
- "sessionControlDescriptionContent": "Kontrollera åtkomsten baserat på sessionskontroller för att möjliggöra begränsade upplevelser i specifika molnprogram.",
- "sessionControlDisableInfo": "Den här kontrollen fungerar bara med appar som stöds. För närvarande är Office 365, Exchange Online och SharePoint Online de enda molnapparna som stöder appframtvingade begränsningar. Klicka här om du vill läsa mer.",
- "sessionControlInfoBallonText": "Sessionskontroller aktiverar en begränsad upplevelse inom en molnapp.",
- "sessionControls": "Sessionskontroller",
- "sessionControlsAppEnforcedLabel": "Använd app-framtvingade begränsningar",
- "sessionControlsCasLabel": "Använd Appkontroll för villkorsstyrd åtkomst",
- "sessionControlsSecureSignInLabel": "Kräv token-bindning",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} inkluderade",
- "signinRiskReauth": "Villkoret Inloggningsrisk måste väljas när Kräv multifaktorautentisering och sessionskontrollen Inloggningsfrekvens varje gång har valts",
- "signinRiskTriggerDescriptionContent": "Välj nivå för inloggningsrisk",
- "singleTenantServicePrincipalInfoBallonText": "Principen gäller endast för tjänstens huvudnamn för enskild klientorganisation som ägs av din organisation. Klicka här om du vill veta mer ",
- "specificSigninRiskLevelsOption": "Välj specifika risknivåer för inloggning",
- "specificUsersExcluded": "specifika användare som undantas",
- "specificUsersIncluded": "Specifika användare som inkluderas",
- "specificUsersIncludedAndExcluded": "Specifika användare som exkluderats och inkluderats",
- "startDatePickerLabel": "Startar",
- "startFreeTrial": "Starta en kostnadsfri utvärdering",
- "startTimePickerLabel": "Starttid",
- "sunday": "söndag",
- "testButton": "What If",
- "thumbprintCol": "Tumavtryck",
- "thursday": "torsdag",
- "timeConditionAllTimesLabel": "När som helst",
- "timeConditionIntroText": "Konfigurera tiden då den här principen ska gälla",
- "timeConditionSelectorInfoBallonContent": "När användaren loggar in. Till exempel \"onsdag 09.00-17.00 PST\"",
- "timeConditionSelectorLabel": "Tid (förhandsversion)",
- "timeConditionSpecificLabel": "Specifika tider",
- "timeSelectorAllTimesText": "När som helst",
- "timeSelectorSpecificTimesText": "Specifika tider konfigurerade",
- "timeZoneDropdownInfoBalloonContent": "Välj en tidszon som definierar tidsintervallet. Den här principen gäller för alla användare i alla tidszoner. \"Onsdag 09.00-17.00\" för en användare, kan till exempel vara \"onsdag 10.00-18.00\" för en användare i en annan tidszon.",
- "timeZoneDropdownLabel": "Tidszon",
- "timeZoneDropdownPlaceholderText": "Välj en tidszon",
- "tooManyPoliciesDescription": "Bara de 50 första principerna visas, klicka här för att visa alla principer",
- "tooManyPoliciesTitle": "Fler än 50 principer hittades",
- "trustedLocationStatusIconDescription": "Platsen är betrodd",
- "trustedLocationStatusIconEnabled": "Betrodd statusikon",
- "tuesday": "tisdag",
- "uploadInBadState": "Det gick inte att ladda upp den angivna filen.",
- "upsellAppsDescription": "Kräv alltid multifaktorautentisering för känsliga program eller bara från utanför företagsnätverket.",
- "upsellAppsTitle": "Säkra program",
- "upsellBannerText": "Skaffa en kostnadsfri Premium-utvärderingsversion om du vill använda den här funktionen",
- "upsellDataDescription": "Kräv att enheten markeras som kompatibel eller är Microsoft Entra-hybridansluten för att den ska beviljas åtkomst till företagsresurserna.",
- "upsellDataTitle": "Säkra data",
- "upsellDescription": "Villkorad åtkomst ger dig den kontroll och det skydd du behöver för att hålla dina företagsdata säkra, samtidigt som den ger dina användare möjligheten att arbeta från valfri enhet. Du kan t.ex. begränsa åtkomsten utanför företagsnätverket eller begränsa åtkomsten till enheter med principer som följer standard.",
- "upsellRiskDescription": "Kräv multifaktorautentisering för riskhändelser som identifierats av Microsofts maskininlärningssystem.",
- "upsellRiskTitle": "Skydda mot risk",
- "upsellTitle": "Villkorad åtkomst",
- "upsellWhyTitle": "Varför ska man använda villkorsstyrd åtkomst?",
- "userAppNoneOption": "Ingen",
- "userNamePlaceholderText": "Ange användarnamn",
- "userNotSetSeletorLabel": "0 användare och grupper valda",
- "userOnlySelectionBladeExcludeDescription": "Välj de användare som ska undantas principen",
- "userOrGroupSelectionCountDiffBannerText": "{0} som konfigurerats i den här policyn har tagits bort från katalogen, men detta påverkar inte andra användare och grupper i policyn. Nästa gång som du uppdaterar policyn tas de borttagna användarna och/eller grupperna automatiskt bort från den.",
- "userOrSPNotSetSelectorLabel": "Inga användar- eller arbetsbelastningsidentiteter har valts",
- "userOrSPSelectionBladeTitle": "Användar- eller arbetsbelastningsidentiteter",
- "userOrSPSelectorInfoBallonText": "Identiteter i katalogen som principen gäller för, inklusive användare, grupper och tjänstens huvudnamn",
- "userRequired": "Användare krävs",
- "userRiskErrorBox": "Du måste välja villkoret \"Användarrisk\" när beviljandet \"Tillåt lösenordsändring\" har valts",
- "userRiskReauth": "Villkoret \"Användarrisk\" och inte \"Inloggningsrisk\" måste väljas när beviljandet \"Kräv lösenordsändring\" och sessionskontrollen \"Inloggningsfrekvens varje gång\" har valts",
- "userSPRequired": "Användare eller tjänstens huvudnamn måste anges",
- "userSPSelectorTitle": "Användar- eller arbetsbelastningsidentitet",
- "userSelectionBladeAllUsersAndGroups": "Alla användare och grupper",
- "userSelectionBladeExcludeDescription": "Välj de användare och grupper som ska undantas från principen",
- "userSelectionBladeExcludeTabTitle": "Uteslut",
- "userSelectionBladeExcludedSelectorTitle": "Välj exkluderade användare och grupper",
- "userSelectionBladeIncludeDescription": "Välj de användare som principen ska gälla för",
- "userSelectionBladeIncludeTabTitle": "Inkludera",
- "userSelectionBladeIncludedSelectorTitle": "Välj",
- "userSelectionBladeSelectUsers": "Välj användare",
- "userSelectionBladeSelectedUsers": "Välj användare och grupper",
- "userSelectionBladeTitle": "Användare och grupper",
- "userSelectorBladeTitle": "Användare",
- "userSelectorExcluded": "{0} exkluderade",
- "userSelectorGroupPlural": "{0} grupper",
- "userSelectorGroupSingular": "1 grupp",
- "userSelectorIncluded": "{0} inkluderade",
- "userSelectorInfoBallonText": "Användare och grupper i katalogen som principen tillämpas för. Exempelvis pilotgrupp",
- "userSelectorSelected": "{0} har valts",
- "userSelectorTitle": "Användare",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} användare",
- "userSelectorUserSingular": "1 användare",
- "userSelectorWithExclusion": "{0} och {1}",
- "usersGroupsLabel": "Användare och grupper",
- "viewApprovedAppsText": "Se lista över godkända klientappar",
- "viewCompliantAppsText": "Visa en lista över principskyddade klientappar",
- "viewPolicyInformation": "Visa principinformation",
- "vpnBladeTitle": "VPN-anslutningsmöjlighet",
- "vpnCertCreateFailedMessage": "Fel: {0}",
- "vpnCertCreateFailedTitle": "Det gick inte att skapa {0}",
- "vpnCertCreateInProgressTitle": "{0} skapas",
- "vpnCertCreateSuccessMessage": "{0} skapades.",
- "vpnCertCreateSuccessTitle": "{0} skapades",
- "vpnCertNoRowsMessage": "Inga VPN-certifikat hittades",
- "vpnCertUpdateFailedMessage": "Fel: {0}",
- "vpnCertUpdateFailedTitle": "Det gick inte att uppdatera {0}",
- "vpnCertUpdateInProgressTitle": "Uppdaterar {0}",
- "vpnCertUpdateSuccessMessage": "{0} har uppdaterats.",
- "vpnCertUpdateSuccessTitle": "{0} har uppdaterats",
- "vpnFeatureInfo": "Klicka här om du vill ha mer information om VPN-anslutningsmöjligheter och villkorsstyrd åtkomst.",
- "vpnFeatureWarning": "När ett VPN-certifikat har skapats i portalen börjar Microsoft Entra ID använda det omedelbart för att kunna utfärda certifikat med kort livslängd till VPN-klienten. Det är viktigt att VPN-certifikatet omedelbart distribueras till VPN-servern, så att du undviker problem med valideringen av VPN-klientens autentiseringsuppgifter.",
- "vpnMenuText": "VPN-anslutningsmöjlighet",
- "vpncertDropdownDefaultOption": "Giltighetstid",
- "vpncertDropdownInfoBalloonContent": "Välj varaktighet för certifikatet som du vill skapa",
- "vpncertDropdownLabel": "Välj varaktighet",
- "vpncertDropdownOneyearOption": "1 år",
- "vpncertDropdownThreeyearOption": "3 år",
- "vpncertDropdownTwoyearOption": "2 år",
- "wednesday": "onsdag",
- "whatIfCountry": "Land/region",
- "whatIfCountryInfo": "Landet/regionen som användaren loggar in från.",
- "whatIfDevicePlatformInfo": "Den enhetsplattform från vilken användaren loggar in.",
- "whatIfEnterIpAddress": "Ange IP-adress (t.ex. 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "En ogiltig IP-adress angavs.",
- "whatIfIpAddress": "IP-adress",
- "whatIfIpAddressInfo": "Den IP-adress användaren in från.",
- "whatIfIpCountryInfoBoxText": "Om du använder en IP-adress eller land/region måste båda fälten fyllas i och mappas ihop korrekt.",
- "whatIfSelectCountry": "Välj land/region...",
- "whatIfSelectDevicePlatform": "Välj enhetsplattform...",
- "whatIfSelectPrivateLink": "Välj privat länk...",
- "whatIfSelectSignInRisk": "Välj risknivå för inloggning...",
- "whatIfSignInRisk": "Inloggningsrisk",
- "whatIfSignInRiskInfo": "Den risknivå som är kopplad till inloggningen",
- "whatIfUnknownAreas": "Okända områden",
- "windows365InfoBox": "Om du väljer Windows 365 påverkas anslutningar till molnbaserade datorer och Azure Virtual Desktop-sessionsvärdar. Klicka här om du vill veta mer.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Arbetsbelastningsidentiteter (förhandsversion)",
- "workloadIdentitiesLicenseText": "En P1- eller P2-licens för arbetsbelastningsidentiteter krävs för att redigera den här principen.",
- "workloadIdentity": "Arbetsbelastningsidentitet"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Stöds inte",
- "supportEnding": "Supporten upphör",
- "supported": "Stöds"
- }
- },
- "SecurityTemplate": {
- "aSR": "Minskning av attackytan",
- "accountProtection": "Kontoskydd",
- "allDevices": "Alla enheter",
- "antivirus": "Antivirus",
- "antivirusReporting": "Antivirusrapportering (förhandsversion)",
- "conditionalAccess": "Villkorlig åtkomst",
- "deviceCompliance": "Enhetsefterlevnad",
- "diskEncryption": "Diskkryptering",
- "eDR": "Slutpunktsidentifiering och svar",
- "ePM": "Hantering av slutpunktsprivilegier",
- "firewall": "Brandvägg",
- "helpSupport": "Hjälp och support",
- "setup": "Installation",
- "wdapt": "Microsoft Defender för Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Misslyckad",
- "hardReboot": "Hård omstart",
- "retry": "Försök igen",
- "softReboot": "Mjuk omstart",
- "success": "Klart"
- },
- "Columns": {
- "codeType": "Kodtyp",
- "returnCode": "Returkod"
- },
- "bladeTitle": "Returkoder",
- "gridAriaLabel": "Returkoder",
- "header": "Ange returkoder för att visa på funktionssätt efter installation:",
- "onAddAnnounceMessage": "Returkod vid tillagt objekt {0} av {1}",
- "onDeleteSuccess": "Returkoden {0} har tagits bort",
- "returnCodeAlreadyUsedValidation": "Returkoden används redan.",
- "returnCodeMustBeIntegerValidation": "Returkoden måste vara ett heltal.",
- "returnCodeShouldBeAtLeast": "Returkoden måste vara minst {0}.",
- "returnCodeShouldBeAtMost": "Returkoden får vara högst {0}.",
- "selectorLabel": "Returkoder"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "arabiska",
- "bulgarian": "bulgariska",
- "chineseSimplified": "kinesiska (förenklad)",
- "chineseTraditional": "kinesiska (traditionell)",
- "croatian": "kroatiska",
- "czech": "tjeckiska",
- "danish": "danska",
- "dutch": "nederländska",
- "englishUK": "engelska (Storbritannien)",
- "englishUS": "engelska (USA)",
- "estonian": "estniska",
- "finnish": "finska",
- "frenchCanada": "franska (Kanada)",
- "frenchFrance": "franska (Frankrike)",
- "german": "tyska",
- "greek": "grekiska",
- "hebrew": "hebreiska",
- "hungarian": "ungerska",
- "italian": "italienska",
- "japanese": "japanska",
- "korean": "koreanska",
- "latvian": "lettiska",
- "lithuanian": "litauiska",
- "norwegian": "norska, bokmål",
- "polish": "polska",
- "portugueseBrazil": "portugisiska (Brasilien)",
- "portuguesePortugal": "portugisiska (Portugal)",
- "romanian": "rumänska",
- "russian": "ryska",
- "serbian": "serbiska",
- "slovak": "slovakiska",
- "slovenian": "slovenska",
- "spanishMexico": "spanska (Mexiko)",
- "spanishSpain": "spanska (Spanien)",
- "swedish": "svenska",
- "thai": "Thailand",
- "turkish": "turkiska",
- "ukrainian": "ukrainska"
- },
- "Summary": {
- "placeholder": "Välj ett aviseringsmeddelande från vänster och förhandsvisa innehållet."
- },
- "companyContact": "Visa kontaktuppgifter",
- "companyLogo": "Visa företagslogotyp",
- "companyName": "Visa företagsnamn",
- "createEditDescription": "Skapa eller redigera mallar för aviseringsmeddelanden.",
- "createMessage": "Skapa meddelande",
- "deviceDetails": "Visa enhetsinformation",
- "deviceDetailsInfoBox": "Den här inställningen är inaktiverad som standard eftersom hämtning av enhetsinformation kan orsaka en fördröjning i e-postaviseringar som tas emot.",
- "editImpactInfo": "När du redigerar den här notismeddelandemallen påverkas alla principer där mallen används.",
- "editMessage": "Redigera meddelande",
- "email": "e-post",
- "emailFooterTitle": "E-postsidfot",
- "emailHeaderFooterInfo": "Inställningarna för e-posthuvud och sidfot för e-postmeddelanden beror på de anpassade inställningarna för klientadministratörsnoden i Endpoint Manager.",
- "emailHeaderTitle": "E-postsidhuvud",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Ställ in anpassningsinställningar",
- "formSubTitle": "Skapa eller ändra e-postaviseringar",
- "headerFooterSettingsTab": "Inställningar för sidhuvud och sidfot",
- "imgPreview": "Förhandsvisning av avbildning",
- "infotext": "Välj ett aviseringsmeddelande. Om du vill skapa en ny avisering går du till Aviseringar i hanteringsavsnittet i arbetsbelastningen Ange enhetsefterlevnad.",
- "iwLink": "Visa länken till företagsportalens webbplats",
- "listEmpty": "Inga meddelandemallar.",
- "listEmptySelectOnly": "Inga meddelandemallar. Om du vill skapa en ny avisering går du till Aviseringar i hanteringsavsnittet i arbetsbelastningen Ange enhetsefterlevnad.",
- "listSubTitle": "Lista över mallar för e-postaviseringar",
- "listTitle": "Mallar för aviseringsmeddelanden",
- "localizedNotificationMessageTemplates": "Lokaliserade aviseringsmeddelandemallar",
- "messageAssigned": "Det går inte att ta bort meddelandemallen eftersom den används av en eller flera efterlevnadsprinciper.",
- "messageCapitalized": "Mall för aviseringsmeddelande",
- "messageLowercase": "mall för aviseringsmeddelande",
- "missingDefaultError": "Välj en standardmall",
- "notificationMessageTemplates": "Mallar för aviseringsmeddelanden",
- "rowValidationError": "Minst en meddelandemall måste anges",
- "selectDescription": "Välj en e-postavisering. Om du vill skapa en ny avisering går du till Aviseringar i hanteringsavsnittet i arbetsbelastningen Ange enhetsefterlevnad.",
- "tenantValueText": "Klientorganisationsvärde",
- "testEmailLabel": "Skicka förhandsgranskad e-post",
- "localeLabel": "Nationella inställningar",
- "isDefaultLocale": "Är standard"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Antal dagar att vänta innan omstart framtvingas"
- },
"Description": {
"label": "Beskrivning"
},
+ "FeatureDeploymentSettings": {
+ "header": "Inställningar för funktionsdistribution"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Den här funktionen kan inte nedgradera en enhet.",
+ "label": "Funktionsuppdatering som ska distribueras"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Tillgänglighet för slutlig grupp"
+ },
+ "GradualRolloutInterval": {
+ "label": "Dagar mellan grupper"
+ },
+ "GradualRolloutStartDate": {
+ "label": "Tillgänglighet för första gruppen"
+ },
"Name": {
"label": "Namn"
},
- "QualityUpdateRelease": {
- "label": "Skicka ut installation av kvalitetsuppdateringar om enhetens operativsystemversion är under:"
- },
- "bladeTitle": "Kvalitetsuppdateringar Windows 10 och senare (förhandsversion)",
- "loadError": "Det gick inte att läsa in!"
+ "OptionalUpdate": {
+ "label": "Obligatorisk eller valfri uppdatering"
+ },
+ "RolloutOptions": {
+ "label": "Distributionsalternativ"
+ },
+ "RolloutSettings": {
+ "header": "När vill du göra uppdateringen tillgänglig i Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Ställ in omfångstaggar för den här principen."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "Första tillgängliga datum"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Inaktiverat",
+ "enabled": "Aktiverat",
+ "infoBalloonContent": "Kontrollera om den senaste Windows 10 funktionsuppdateringen för enheter som inte är berättigade till Windows 11",
+ "label": "När en enhet inte är berättigad att köra Windows 11, installera den senaste Windows 10-funktionsuppdateringen",
+ "notApplicable": "Ej tillämpligt",
+ "summaryLabel": "Installera Windows 10 på enheter som inte är berättigade att köra Windows 11"
+ },
+ "bladeTitle": "Funktionsuppdateringsdistributioner",
+ "deploymentSettingsTitle": "Distributionsinställningar",
+ "loadError": "Det gick inte att läsa in!",
+ "windows11EULA": "Genom att markera användning av den här funktionsuppdateringen när du använder detta operativsystem på en enhet godkänner du att (1) den tillämpliga Windows-licensen köptes genom volymlicensiering, eller (2) du har behörighet att binda din organisation och accepterar å organisationens vägnar relevanta Licensvillkor för Programvara från Microsoft som du hittar här {0}."
},
+ "Notifications": {
+ "deploymentSaved": "{0} har sparats.",
+ "newFeatureUpdateDeploymentCreated": "Ny distribution av funktionsuppdatering har skapats."
+ },
"TabName": {
- "qualityUpdateSettings": "Inställningar"
+ "deploymentSettings": "Distributionsinställningar",
+ "groupAssignmentSettings": "Tilldelningar",
+ "scopeSettings": "Omfångstaggar"
},
- "infoBoxText": "Den enda kontrollen av kvalitetsuppdateringar som just nu är tillgänglig förutom den befintliga principen för uppdateringsringar för Windows 10 och senare är möjligheten att skicka kvalitetsuppdateringar för enheter som hamnat under en angiven korrigeringsnivå. Det kommer att finnas fler kontroller i framtiden.",
- "licenseLearnMoreText": "Läs mer om krav och principer för kvalitetsuppdatering.",
- "licenseWarningBoxText": "För att skapa principer för kvalitetsuppdatering krävs specifik licensiering.",
- "warningBoxText": "Utskick av programuppdateringar kan visserligen förkorta tiden till regelefterlevnad men påverkar också användarnas produktivitet. Risken för att användarna måste starta om datorn under arbetstid ökar markant."
+ "gradualRolloutLicenseWarning": "Den här funktionen kräver specifik licensiering.",
+ "gradualRolloutLicenseWarningEdit": "Den här funktionen kan fortsätta att användas och konfigureras tills principen sparas utan att den här funktionen har valts.",
+ "licenseLearnMoreText": "Läs mer om krav och principer för funktionsuppdatering.",
+ "optionalUpdateWarning": "Valfritt är endast tillgängligt för Windows 11-uppdateringar",
+ "profileNameWarning": "Namnet får innehålla färre än 64 tecken",
+ "specificLicensingRequired": "Vissa valda funktioner kräver specifik licensiering."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64-bitars",
- "thirtyTwoBit": "32-bitars"
- },
- "TACSettings": {
- "edgeSettings": "Edge-konfigurationsinställningar",
- "edgeWindowsDataProtectionSettings": "Edge-dataskyddsinställningar (Windows) – förhandsversion",
- "edgeWindowsSettings": "Edge-konfigurationsinställningar (Windows) – förhandsversion",
- "generalAppConfig": "Allmän appkonfiguration",
- "generalSettings": "Allmänna konfigurationsinställningar",
- "outlookSMIMEConfig": "Outlook S/MIME-inställningar",
- "outlookSettings": "Outlook-konfigurationsinställningar",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Lägg till nätverksgräns",
- "addNetworkBoundaryButton": "Lägg till nätverksgräns...",
- "allowWindowsSearch": "Låt Windows Search söka i krypterade företagsdata och Store-appar",
- "authoritativeIpRanges": "Listan över företagets ip-intervall är auktoritativ (identifiera inte automatiskt)",
- "authoritativeProxyServers": "Listan över företagsproxyservrar är auktoritativ (identifiera inte automatiskt)",
- "boundaryType": "Gränstyp",
- "cloudResources": "Molnresurser",
- "corporateIdentity": "Företagsidentitet",
- "dataRecoveryCert": "Ladda upp ett certifikat för dataåterställningsagenten för att tillåta återställning av krypterade data",
- "editNetworkBoundary": "Redigera nätverksgräns",
- "enrollmentState": "Registreringsstatus",
- "iPv4Ranges": "IPv4-intervall",
- "iPv6Ranges": "IPv6-intervall",
- "internalProxyServers": "Interna proxyservrar",
- "maxInactivityTime": "Maximal tid (i minuter) som får passera innan en inaktiv enhet låses med PIN-kod eller lösenord",
- "maxPasswordAttempts": "Antal autentiseringsförsök som tillåts innan enheten rensas",
- "mdmDiscoveryUrl": "Webbadress till MDM-identifiering",
- "mdmRequiredSettingsInfo": "Principen avser endast Windows 10 Anniversary och högre. Med den här principen används Windows informationsskydd (WIP) som skydd.",
- "minimumPinLength": "Ange lägsta antal tillåtna tecken för PIN-kod",
- "name": "Namn",
- "networkBoundariesGridEmptyText": "Alla nätverksgränser du lägger till visas här",
- "networkBoundary": "Nätverksgräns",
- "networkDomainNames": "Nätverksdomäner",
- "neutralResources": "Neutrala resurser",
- "passportForWork": "Använd Windows Hello för företag som inloggningsmetod i Windows",
- "pinExpiration": "Ange tidsperiod (i dagar) som en PIN-kod får användas innan användaren måste ändra den",
- "pinHistory": "Ange antalet tidigare PIN-koder som kan kopplas till ett användarkonto och som inte kan återanvändas",
- "pinLowercaseLetters": "Ställ in användning av gemener i PIN-koden för Windows Hello för företag",
- "pinSpecialCharacters": "Ställ in användning av specialtecken i PIN-koden för Windows Hello för företag",
- "pinUppercaseLetters": "Ställ in användning av versaler i PIN-koden för Windows Hello för företag",
- "protectUnderLock": "Förhindra appars tillgång till företagsdata när enheten är låst. Gäller endast Windows 10 Mobile",
- "protectedDomainNames": "Skyddade domäner",
- "proxyServers": "Proxyservrar",
- "requireAppPin": "Inaktivera appens PIN-kod när enhetens PIN-kod hanteras",
- "requiredSettings": "Nödvändiga inställningar",
- "requiredSettingsInfo": "Om du ändrar omfång eller tar bort principen dekrypteras företagsinformationen.",
- "revokeOnMdmHandoff": "Återkalla åtkomst till skyddade data när enheten registreras i MDM",
- "revokeOnUnenroll": "Återkalla krypteringsnycklar vid avregistrering",
- "rmsTemplateForEdp": "Ange det mall-ID som ska användas för Azure RMS",
- "showWipIcon": "Visa symbol för företagsdataskydd",
- "type": "Typ",
- "useRmsForWip": "Använd Azure RMS för Windows informationsskydd",
- "value": "Värde",
- "weRequiredSettingsInfo": "Principen avser endast Windows 10 Creators Update och högre. Med den här principen används Windows informationsskydd (WIP) och Windows MAM som skydd.",
- "wipProtectionMode": "Läget för Windows informationsskydd",
- "withEnrollment": "Med registrering",
- "withoutEnrollment": "Utan registrering"
+ "Platform": {
+ "all": "Alla",
+ "android": "Android-enhetsadministratör",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Gemensam",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS och Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Okänd",
+ "unsupported": "Stöds inte",
+ "windows": "Windows",
+ "windows10": "Windows 10 och senare",
+ "windows10CM": "Windows 10 och senare (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 och senare",
+ "windows8And10": "Windows 8 och 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 och senare",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 och Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 och senare (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows-dator"
+ },
+ "InstallIntent": {
+ "available": "Tillgängligt för registrerade enheter",
+ "availableWithoutEnrollment": "Tillgänglig med eller utan registrering",
+ "required": "Obligatoriskt",
+ "uninstall": "Avinstallera"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filter",
+ "noFilters": "Inget"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Upphovsperson",
- "template": "Mallnamn"
- },
- "Row": {
- "ariaLabel": "rad {0} av {1} kolumn {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Börja från början och välj de egenskaper du vill använda i biblioteket med tillgängliga lageregenskaper"
- },
- "SettingsCatalog": {
- "subtitle": "Börja från början och välj önskade inställningar från biblioteket med tillgängliga inställningar",
- "title": "Inställningskatalog"
- },
- "Templates": {
- "subtitle": "Mallar innehåller grupper av inställningar, sorterade efter funktion. Använd en mall när du inte vill sätta upp principer manuellt eller vill ge enheter behörighet till företagsnätverk, till exempel konfigurering av trådlös anslutning eller VPN.",
- "title": "Mallar"
- },
- "noData": "Inga principmallar hittades"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop Client",
- "visioProRetail": "Visio Online, abonnemang 2"
- },
- "Countries": {
- "ae": "Förenade Arabemiraten",
- "ag": "Antigua och Barbuda",
- "ai": "Anguilla",
- "al": "Albanien",
- "am": "Armenien",
- "ao": "Angola",
- "ar": "Argentina",
- "at": "Österrike",
- "au": "Australien",
- "az": "Azerbajdzjan",
- "bb": "Barbados",
- "be": "Belgien",
- "bf": "Burkina Faso",
- "bg": "Bulgarien",
- "bh": "Bahrain",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolivia",
- "br": "Brasilien",
- "bs": "Bahamas",
- "bt": "Bhutan",
- "bw": "Botswana",
- "by": "Vitryssland",
- "bz": "Belize",
- "ca": "Kanada",
- "cg": "Republiken Kongo",
- "ch": "Schweiz",
- "cl": "Chile",
- "cn": "Kina",
- "co": "Colombia",
- "cr": "Costa Rica",
- "cv": "Cabo Verde",
- "cy": "Cypern",
- "cz": "Tjeckien",
- "de": "Tyskland",
- "dk": "Danmark",
- "dm": "Dominica",
- "do": "Dominikanska republiken",
- "dz": "Algeriet",
- "ec": "Ecuador",
- "ee": "Estland",
- "eg": "Egypten",
- "es": "Spanien",
- "fi": "Finland",
- "fj": "Fiji",
- "fm": "Mikronesiska federationen",
- "fr": "Frankrike",
- "gb": "Storbritannien",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Grekland",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hongkong",
- "hn": "Honduras",
- "hr": "Kroatien",
- "hu": "Ungern",
- "id": "Indonesien",
- "ie": "Irland",
- "il": "Israel",
- "in": "Indien",
- "is": "Island",
- "it": "Italien",
- "jm": "Jamaica",
- "jo": "Jordanien",
- "jp": "Japan",
- "ke": "Kenya",
- "kg": "Kirgizistan",
- "kh": "Kambodja",
- "kn": "Saint Kitts och Nevis",
- "kr": "Republiken Korea",
- "kw": "Kuwait",
- "ky": "Caymanöarna",
- "kz": "Kazakstan",
- "la": "Demokratiska folkrepubliken Laos",
- "lb": "Libanon",
- "lc": "Saint Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Litauen",
- "lu": "Luxemburg",
- "lv": "Lettland",
- "md": "Republiken Moldavien",
- "mg": "Madagaskar",
- "mk": "Nordmakedonien",
- "ml": "Mali",
- "mn": "Mongoliet",
- "mo": "Macao",
- "mr": "Mauretanien",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Mexiko",
- "my": "Malaysia",
- "mz": "Moçambique",
- "na": "Namibia",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Nederländerna",
- "no": "Norge",
- "np": "Nepal",
- "nz": "Nya Zeeland",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua Nya Guinea",
- "ph": "Filippinerna",
- "pk": "Pakistan",
- "pl": "Polen",
- "pt": "Portugal",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Rumänien",
- "ru": "Ryssland",
- "sa": "Saudiarabien",
- "sb": "Solomonöarna",
- "sc": "Seychellerna",
- "se": "Sverige",
- "sg": "Singapore",
- "si": "Slovenien",
- "sk": "Slovakien",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Surinam",
- "st": "São Tomé och Príncipe",
- "sv": "El Salvador",
- "sz": "Swaziland",
- "tc": "Turks- och Caicosöarna",
- "td": "Tchad",
- "th": "Thailand",
- "tj": "Tadzjikistan",
- "tm": "Turkmenistan",
- "tn": "Tunisien",
- "tr": "Turkiet",
- "tt": "Trinidad och Tobago",
- "tw": "Taiwan",
- "tz": "Tanzania",
- "ua": "Ukraina",
- "ug": "Uganda",
- "us": "USA",
- "uy": "Uruguay",
- "uz": "Uzbekistan",
- "vc": "Saint Vincent och Grenadinerna",
- "ve": "Venezuela",
- "vg": "Brittiska Jungfruöarna",
- "vn": "Vietnam",
- "ye": "Jemen",
- "za": "Sydafrika",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Aktuell kanal",
- "deferred": "Halvårskanal för företag",
- "firstReleaseCurrent": "Aktuell kanal (förhandsversion)",
- "firstReleaseDeferred": "Halvårskanal för företag (förhandsversion)",
- "monthlyEnterprise": "Månadskanal för företag",
- "placeHolder": "Välj en"
- },
- "AppProtection": {
- "allAppTypes": "Rikta till alla typer av appar",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Appar i Android Work-profil",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Appar på dedikerade Android Enterprise-enheter med delat Microsoft Entra-läge",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Appar på Android-projekt med öppen källkod som är associerade",
- "appsOnAndroidOpenSourceProjectUserless": "Appar på Android-projekt med öppen källkod Användarlöst",
- "appsOnIntuneManagedDevices": "Appar på Intune-hanterade enheter",
- "appsOnUnmanagedDevices": "Appar på ohanterade enheter",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Ej tillgänglig",
- "windows10PlatformLabel": "Windows 10 och senare",
- "withEnrollment": "Med registrering",
- "withoutEnrollment": "Utan registrering"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Inbyggd roll",
- "customCloudPCRole": "Anpassad Windows 365-roll",
- "customIntuneRole": "Anpassad Intune-roll",
- "customRole": "Anpassad roll"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} ingår i en eller flera principuppsättningar. Om du tar bort {0} kan du inte längre tilldela den via de principuppsättningarna. Vill ta bort den ändå?",
- "contentWithError": "{0} kan ingå i en eller flera principuppsättningar. Om du tar bort {0} kan du inte längre tilldela den via de principuppsättningarna. Vill ta bort den ändå?",
- "header": "Vill du ta bort den här begränsningen?"
- },
- "DeviceLimit": {
- "description": "Ange högst antal enheter som en användare får registrera.",
- "header": "Begränsningar för antal enheter",
- "info": "Ange hur många enheter som varje användare kan registrera."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Måste vara minst 1.0.",
- "android": "Ange ett giltigt versionsnummer. Exempel: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Ange ett giltigt versionsnummer. Exempel: 5.0, 5.1.1",
- "iOS": "Ange ett giltigt versionsnummer. Exempel: 9.0, 10.0, 9.0.2",
- "mac": "Ange ett giltigt versionsnummer. Exempel: 10, 10.10, 10.10.1",
- "min": "Minimum får inte vara lägre än {0}",
- "minMax": "Minimiversionen får inte vara högre än maxversionen.",
- "windows": "Måste vara minst 10.0. Lämna tomt för att tillåta 8.1-enheter",
- "windowsMobile": "Måste vara minst 10.0. Lämna tomt för att tillåta 8.1-enheter"
- },
- "allPlatformsBlocked": "Alla enhetsplattformar är blockerade. Tillåt plattformsregistrering för att aktivera plattformskonfiguration.",
- "blockManufacturerPlaceHolder": "Namn på tillverkare",
- "blockManufacturersHeader": "Blockerade tillverkare",
- "cannotRestrict": "Begränsningen stöds inte",
- "configurationDescription": "Ange de begränsningar för plattformskonfiguration som gäller för att registrera en enhet. Använd kompatibilitetsprinciper för att begränsa enheter efter registreringen. Ange versioner som major.minor.build. Versionsbegränsningar gäller endast för enheter som registrerats med företagsportalen. Intune klassificerar enheter som privatägda som standard. En ytterligare åtgärd krävs för att klassificera enheter som företagsägda.",
- "configurationDescriptionLabel": "Läs mer om att ställa in registreringsbegränsningar",
- "configurations": "Konfigurera plattformar",
- "deviceManufacturer": "Enhetstillverkare",
- "header": "Begränsningar av enhetstyp",
- "info": "Ange vilka plattformar, versioner och hanteringstyper som kan registreras.",
- "manufacturer": "Tillverkare",
- "max": "Max",
- "maxVersion": "Högsta version",
- "min": "Min",
- "minVersion": "Lägsta version",
- "newPlatforms": "Du har tillåtit nya plattformar. Uppdatera plattformskonfigurationer.",
- "personal": "Personligt ägd",
- "platform": "Plattform",
- "platformDescription": "Du kan tillåta registrering av följande plattformar. Blockera bara plattformar som du inte har stöd för. Du kan ange ytterligare registreringsbegränsningar för tillåtna plattformar.",
- "platformSettings": "Plattformsinställningar",
- "platforms": "Välj plattformar",
- "platformsSelected": "{0} plattformar markerade",
- "type": "Typ",
- "versions": "versioner",
- "versionsRange": "Tillåt minsta/största intervall:",
- "windowsTooltip": "Begränsar registrering via mobilenhetshantering. Begränsar inte installation av datoragent. Det finns bara stöd för Windows 10- och Windows 11-enheter. Lämna versioner tomt för att tillåta Windows 8.1."
- },
- "Priority": {
- "saved": "Begränsningsprioriteringar har sparats."
- },
- "Row": {
- "announce": "Prioritet: {0}, namn: {1}, tilldelat: {2}"
- },
- "Table": {
- "deployed": "Distribuerad",
- "name": "Namn",
- "priority": "Prioritet"
- },
- "Type": {
- "limit": "Begränsning för antal enheter",
- "type": "Begränsning av enhetstyp"
- },
- "allUsers": "Alla användare",
- "androidRestrictions": "Android-begränsningar",
- "create": "Skapa begränsning",
- "defaultLimitDescription": "Det här är standardbegränsningen för antal enheter som tillämpas med lägsta prioritet för alla användare oavsett gruppmedlemskap.",
- "defaultTypeDescription": "Det här är standardbegränsningen för enhetstyper som tillämpas med lägsta prioritet för alla användare oavsett gruppmedlemskap.",
- "defaultWhfbDescription": "Det här är standardkonfigurationen för Windows Hello för företag som tillämpas med lägsta prioritet för alla användare oavsett gruppmedlemskap.",
- "deleteMessage": "Användare som påverkas begränsas av nästa högsta tilldelade prioritetsbegränsning eller standardbegränsningen om ingen annan begränsning har tilldelats.",
- "deleteTitle": "Vill du ta bort begränsningen för {0}?",
- "descriptionHint": "Kort stycke som beskriver företagsanvändning eller begränsningsnivå som anges av begränsningsinställningarna.",
- "edit": "Redigera begränsning",
- "info": "En enhet måste uppfylla de mest högprioriterade registreringsbegränsningarna som tilldelats användaren. Du kan dra en enhetsbegränsning om du vill ändra prioriteten. Standardbegränsningar har lägst prioritet för alla användare och styr användarlösa registreringar. En standardbegränsning kan redigeras men inte tas bort.",
- "iosRestrictions": "iOS-begränsningar",
- "mDM": "MDM",
- "macRestrictions": "macOS-begränsningar",
- "maxVersion": "Högsta version",
- "minVersion": "Lägsta version",
- "nameHint": "Det här är det primära attributet som visas för att identifiera begränsningsuppsättningen.",
- "noAssignmentsStatusBar": "Koppla en begränsning till minst en grupp. Klicka på Egenskaper.",
- "nonAdminForbiddenCreateError": "Du måste vara intune-tjänst eller global administratör för att kunna skapa, redigera eller ta bort begränsningar.",
- "nonAdminForbiddenEdit": "Du måste vara administratör för att kunna redigera begränsningar.",
- "notFound": "Begränsningen hittades inte. Den kanske redan har tagits bort.",
- "personallyOwned": "Privatägda enheter",
- "restriction": "Begränsning",
- "restrictionLowerCase": "begränsning",
- "restrictionType": "Begränsningstyp",
- "selectType": "Välj begränsningstyp",
- "selectValidation": "Välj en plattform",
- "typeHint": "Välj begränsning för enhetstyp för att begränsa enhetsegenskaper. Välj begränsning för enhetsgräns för att begränsa antalet enheter per användare.",
- "typeRequired": "Begränsningstyp krävs.",
- "winPhoneRestrictions": "Windows Phone-begränsningar",
- "windowsECv1Info": "Äldre registreringsbegränsningar kan inte redigeras eller omprioriteras, endast tas bort.",
- "windowsECv2Info": "Du kan prioritera registreringsbegränsningar genom att dra och släppa dem. Visa standardbegränsningar och förkonfigurerade begränsningar nedan. Alla nya registreringsbegränsningar har högre prioritet än standardbegränsningar och förkonfigurerade begränsningar.",
- "windowsRestrictions": "Windows-begränsningar",
- "windowsRestrictionsPreview": "Filterbaserade Windows-begränsningar (förhandsversion)"
- },
- "InstallContextType": {
- "device": "Enhet",
- "deviceContext": "Enhetssammanhang",
- "user": "Användare",
- "userContext": "Användarsammanhang"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Beskrivning",
- "placeholder": "Ange en beskrivning"
- },
- "NameTextBox": {
- "label": "Namn",
- "placeholder": "Ange ett namn"
- },
- "PublisherTextBox": {
- "label": "Publisher",
- "placeholder": "Ange en utgivare"
- },
- "VersionTextBox": {
- "label": "Version"
- },
- "headerDescription": "Skapa ett nytt anpassat skriptpaket av de identifierings- och reparationsskript du har skrivit."
- },
- "ScopeTags": {
- "headerDescription": "Välj en eller flera grupper som skriptpaketet ska tilldelas."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Identifieringsskript",
- "placeholder": "Ange skripttext",
- "requiredValidationMessage": "Ange identifieringsskriptet"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Framtvinga signaturkontroll av skript"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Kör det här skriptet med inloggningsuppgifterna"
- },
- "RemediationScript": {
- "infoBox": "Skriptet körs i läget för endast identifiering eftersom det inte finns något reparationsskript."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Reparationsskript",
- "placeholder": "Ange skripttext"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Kör skript i 64-bitars PowerShell"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Ogiltigt skript. Ett eller flera tecken i skriptet är ogiltiga."
- },
- "headerDescription": "Skapa ett anpassat skriptpaket av de skript du skrivit. Skripten körs som standard på tilldelade enheter en gång om dagen.",
- "infoBox": "Det här skriptet är skrivskyddat. Några av inställningarna för skriptet kan ha inaktiverats."
- },
- "title": "Skapa anpassat skript",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Intervall",
- "time": "Datum och tid"
- },
- "Interval": {
- "day": "Upprepas varje dag",
- "days": "Upprepas var {0}:e dag",
- "hour": "Upprepas en gång i timmen",
- "hours": "Upprepas var {0}:e timme",
- "month": "Upprepas varje månad",
- "months": "Upprepas var {0}:e månad",
- "week": "Upprepas varje vecka",
- "weeks": "Upprepas var {0}:e vecka"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) på {1}",
- "withDate": "{0} kl. {1}"
- }
- }
- },
- "Edit": {
- "title": "Redigera: {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Tillåtna webbadresser",
- "tooltip": "Ange de webbplatser användarna har tillgång till i ett arbetssammanhang. Inga andra webbplatser tillåts. Du kan välja att ställa in antingen en lista över tillåtna eller blockerade webbplatser, men inte båda. "
- },
- "ApplicationProxyRedirection": {
- "header": "Programproxy",
- "title": "Proxyomdirigering för program",
- "tooltip": "Aktivera proxyomdirigering för appar för att ge användarna åtkomst till företagslänkar och lokala webbappar."
- },
- "BlockedURLs": {
- "title": "Blockerade webbadresser",
- "tooltip": "Ange de webbplatser som är blockerade för användare när de befinner sig i ett arbetssammanhang. Alla andra webbplatser tillåts. Du kan välja att ställa in antingen en lista över tillåtna eller blockerade webbplatser, men inte båda. "
- },
- "Bookmarks": {
- "header": "Hanterade bokmärken",
- "tooltip": "Ange en lista över bokmärkta webbadresser som är tillgängliga för användarna när de använder Microsoft Edge i ett arbetssammanhang.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Hanterad startsida",
- "title": "Webbadress för genväg till hemsida",
- "tooltip": "Ställ in en genväg till hemsidan som visas för användarna som första symbol under sökfältet när de öppnar en ny flik i Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Omdirigera ej tillförlitliga webbplatser till privat sammanhang",
- "tooltip": "Ställ in om användaren ska kunna övergå till sitt privata sammanhang för att öppna ej betrodda webbplatser."
- }
- },
- "BooleanActions": {
- "allow": "Tillåt",
- "block": "Blockera",
- "configured": "Konfigurerat",
- "disable": "Inaktivera",
- "dontRequire": "Kräv inte",
- "enable": "Aktivera",
- "hide": "Dölj",
- "limit": "Begränsning",
- "notConfigured": "Inte konfigurerat",
- "require": "Kräv",
- "show": "Visa",
- "yes": "Ja"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Gör tillgänglig för användare som en valfri uppdatering",
- "optionalValue": "Valfritt",
- "required": "Gör tillgänglig för användare som en obligatorisk uppdatering",
- "requiredValue": "Obligatoriskt"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 dag",
- "twoDays": "2 dagar",
- "zeroDays": "0 dagar"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Översikt"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Sök efter enhet, användare eller kvalitetsuppdateringsversion."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Det gick inte att läsa in iOS-programuppdateringsprofiler"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS-uppdateringsprofil",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profil"
- },
- "listLoadError": "Det gick inte att läsa in iOS-programuppdateringsprofiler, försök igen senare",
- "lowercase": "iOS-uppdateringsprincip",
- "uppercase": "iOS-uppdateringsprincip"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Vi kan tyvärr inte ansluta till Apple för att hämta listan över versioner. Försök igen senare eller fortsätt med den senaste versionen.",
- "latestUpdate": "Senaste uppdatering",
- "noLongerSupported": "Den valda versionen stöds inte längre",
- "olderVersionSelected": "Eftersom du har valt en tidigare version bör du tillämpa en enhetsbegränsningsprincip som skjuter upp visning av programvaruuppdateringar så att enheterna inte kan uppdateras till den senaste versionen.",
- "prefix": "Installera iOS/iPadOS",
- "selectSupported": "Välj uppdateringsversion som stöds av Apple",
- "updateToInstall": "Uppdatering som ska installeras"
- },
- "Schedule": {
- "always": "Uppdatera vid nästa incheckning",
- "duringTimeWindows": "Uppdatera under schemalagd tid",
- "header": "När en princip för uppdatering tilldelas en enhet, distribuerar Intune automatiskt de senaste uppdateringarna när enheten checkas in. Du kan istället skapa ett veckoschema med anpassade start- och sluttider. Om du väljer att uppdatera utanför den schemalagda tiden, distribuerar Intune inga uppdateringar förrän den schemalagda tidsperioden är slut.",
- "infoBalloon": "När uppdateringarna sker. Ytterligare indata krävs för att schemalägga uppdateringar under eller utanför schemalagda tider.",
- "label": "Schematyp",
- "outsideActiveHours": "Uppdatera utanför aktiv tid (tidigare)",
- "outsideTimeWindows": "Uppdatera utanför schemalagd tid",
- "timeWindow": "Tidsfönster",
- "timeZone": "Tidszon",
- "title": "Inställningar för schemaläggning av uppdateringsprincip:",
- "weekly": "Veckoschema",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "Den version av iOS/iPadOS som ska installeras på enheter vid tiden för uppdatering.",
- "label": "Välj version som ska installeras"
- },
- "header": "Skapa en profil så att de senaste iOS/iPadOS-uppdateringarna automatiskt installeras på tilldelade enheter. Inställningarna anger hur och när programuppdateringar ska distribueras. Den här profilen hindrar inte användare från att uppdatera operativsystemet manuellt, vilket kan förhindras i upp till 90 dagar med en princip för begränsning av enhetskonfiguration. Uppdateringarna tillämpas bara på övervakade enheter.",
- "notAvailable": "SAKNAS"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Det finns inga iOS-uppdateringsprinciper att visa",
- "macOsUpdates": "Det finns inga macOS-programuppdateringsprinciper att visa",
- "windowsUpdates": "Det finns inga uppdateringsringar för Windows 10 och senare att visa."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Enhetsnamn",
- "deviceUpdateStatus": "Status för enhetsuppdatering",
- "lastUpdated": "Senast uppdaterad",
- "osVersion": "Operativsystemsversion",
- "userPrincipalName": "Användarnamn"
- },
- "maximumOSVersionFilter": "Maximal operativsystemsversion",
- "minimumOSVersionFilter": "Lägsta operativsystemsversion",
- "noData": "Det finns inga data att visa",
- "searchBoxPlaceholder": "Sök efter enhetsnamn, användarnamn eller operativsystemversion",
- "title": "Kontosammanfattning för macOS-enheter"
- },
- "Category": {
- "configurationDataFile": "Konfiguration av datafil",
- "critical": "Kritiskt",
- "firmware": "Inbyggd programvara",
- "other": "Annan"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Senast uppdaterad",
- "successfulUpdateCount": "Uppdateringar har distribuerats",
- "totalUpdateCount": "Totalt antal distribuerade uppdateringar",
- "updateCategory": "Uppdateringskategori",
- "updateCategoryStatus": "Status för uppdateringskategori"
- },
- "noData": "Det finns inga data att visa"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Det gick inte att läsa in macOS-programuppdateringsprofiler"
- }
- },
- "State": {
- "available": "Tillgänglig",
- "commandFailed": "Kommandot misslyckades",
- "downloadFailed": "Hämtningen misslyckades",
- "downloadInsufficientNetwork": "Otillräckligt med nätverk för nedladdning",
- "downloadInsufficientPower": "Otillräckligt med ström för nedladdning",
- "downloadInsufficientSpace": "Otillräckligt med utrymme för nedladdning",
- "downloaded": "Nedladdat",
- "downloading": "Hämtar",
- "idle": "Inaktiv",
- "installFailed": "Det gick inte att installera",
- "installInsufficientPower": "Otillräckligt med ström för installation",
- "installInsufficientSpace": "Otillräckligt med utrymme för installation",
- "installing": "Installerar",
- "scheduled": "Schemalagt",
- "success": "Klart",
- "unknown": "Okänd"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Senast uppdaterad",
- "updateName": "Uppdateringens namn",
- "updateStatus": "Uppdatera status",
- "version": "Version"
- },
- "noData": "Det finns inga data att visa",
- "searchBoxPlaceholder": "Sök efter uppdateringens namn eller version"
- },
- "SummaryBlade": {
- "subtitle": "macOS-uppdateringsprofil",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profil"
- },
- "error": "Fel",
- "errorOrErrors": "Fel",
- "errors": "Fel",
- "listLoadError": "Det gick inte att läsa in macOS-programuppdateringsprofiler, försök igen senare",
- "lowercase": "macOs-uppdateringsprincip",
- "other": "Annan",
- "subtitle": "MacOS-programuppdatering",
- "upToDate": "Uppdaterad",
- "uppercase": "macOS-uppdateringsprincip"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Försök igen senare",
- "title": "Det gick inte att ta bort {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Försök igen senare"
- },
- "LoadConfigurationFailed": {
- "description": "Försök igen senare",
- "title": "Det gick inte att läsa in {0}"
- },
- "idWrongFormat": "Profilens id har inte rätt format."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "Välj minst en tidsperiod",
- "tooMany": "Högst 20 tidsperioder kan ställas in"
- }
- },
- "endDay": "Slutdag",
- "endTime": "Sluttid",
- "startDay": "Startdag",
- "startTime": "Starttid",
- "timeWindowError": "Välj en tidsperiod som varar minst en timme."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Det gick inte att läsa in uppdateringsringsprofiler för Windows 10 och senare."
- }
- },
- "SummaryBlade": {
- "subtitle": "Uppdateringsring för Windows 10 och senare",
- "title": "Windows Update för företag"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 och senare",
- "title": "Uppdateringsring för Windows 10 och senare"
- },
- "listLoadError": "Det gick inte att läsa in uppdateringsringsprofiler för Windows 10 och senare. Försök igen senare",
- "lowercase": "Uppdateringsring",
- "uppercase": "Uppdateringsring"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Uppdatera principinställningar",
- "updateRingSettings": "Uppdateringsringinställningar"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Skapa {0}",
- "edit": "Redigera {0}"
- }
- },
- "notScannedYet": "Inte genomsökt ännu",
- "outOfDateIosDevices": "Föråldrade iOS-enheter"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Enhetsbegränsningar (enhetsägare)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS-uppdateringsprincip"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Lika med",
+ "greaterThan": "Större än",
+ "greaterThanOrEqualTo": "Större än eller lika med",
+ "lessThan": "Mindre än",
+ "lessThanOrEqualTo": "Mindre än eller lika med",
+ "notEqualTo": "Inte lika med"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Tillämpa kontroll av skriptsignatur och kör skriptet obemärkt",
+ "enforceSignatureCheckTooltip": "Välj Ja om du vill kontrollera att skriptet har signerats av en betrodd utgivare så att skriptet körs utan varningar eller uppmaningar. Skriptet körs avblockerat. Välj Nej (standard) om du vill köra skriptet med slutanvändarens bekräftelse utan signaturkontroll.",
+ "header": "Använd ett anpassat identifieringsskript",
+ "runAs32Bit": "Kör skript som 32-bitarsprocess på 64-bitarsklienter",
+ "runAs32BitTooltip": "Välj Ja om du vill köra skriptet i en 32-bitarsprocess på 64-bitarsklienter. Välj Nej (standard) om du vill köra skriptet i en 64-bitarsprocess på 64-bitarsklienter. 32-bitarsklienter kör skriptet i en 32-bitarsprocess.",
+ "scriptContent": "Skriptinnehåll",
+ "scriptFile": "Skriptfil",
+ "scriptFileNotSelectedValidation": "Ingen skriptfil har valts.",
+ "scriptFileTooltip": "Välj ett PowerShell-skript som identifierar förekomst av appen på klienten. Appen identifieras när skriptet både returnerar värdet 0 som slutkod och skriver ett strängvärde till STDOUT.",
+ "scriptSizeLimitValidation": "Identifieringsskriptet överskrider den tillåtna maxstorleken. Lös problemet genom att minska storleken på skriptet."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Skapad",
+ "dateModified": "Ändrad den",
+ "doesNotExist": "Filen eller mappen finns inte",
+ "fileOrFolderExists": "Fil eller mapp finns",
+ "sizeInMB": "Storlek i MB",
+ "version": "Sträng (version)"
+ },
+ "associatedWith32Bit": "Kopplat till en 32-bitarsapp på 64-bitarsklienter",
+ "associatedWith32BitTooltip": "Välj Ja om du vill expandera eventuella sökvägsmiljövariabler i 32-bitarskontexten på 64-bitarsklienter. Välj Nej (standard) om du vill expandera eventuella sökvägsmiljövariabler i 64-bitarskontexten på 64-bitarsklienter. 32-bitarsklienter använder alltid 32-bitarskontexten.",
+ "detectionMethod": "Identfieringsmetod",
+ "detectionMethodTooltip": "Välj typ av identifieringsmetod som används för att verifiera förekomsten av appen.",
+ "fileOrFolder": "Fil eller mapp",
+ "fileOrFolderToolTip": "Den fil eller mapp som ska identifieras.",
+ "operator": "Operator",
+ "operatorTooltip": "Välj operator för identifieringsmetoden som används för att verifiera jämförelsen.",
+ "path": "Sökväg",
+ "pathTooltip": "Den fullständiga sökvägen till mappen som innehåller filen eller mappen som ska identifieras.",
+ "value": "Värde",
+ "valueTooltip": "Välj ett värde som matchar den valda identifieringsmetoden. Dataidentifieringsmetoder måste anges i lokal tid."
+ },
+ "GridColumns": {
+ "pathOrCode": "Sökväg/kod",
+ "type": "Typ"
+ },
+ "MsiRule": {
+ "operator": "Operator",
+ "operatorTooltip": "Välj operator för att jämföra MSI-produktversionsverifiering.",
+ "productCode": "MSI-produktkod",
+ "productCodeTooltip": "En giltig MSI-produktkod för appen.",
+ "productVersion": "Värde",
+ "productVersionCheck": "Kontroll av MSI-produktversion",
+ "productVersionCheckTooltip": "Välj Ja om du utöver MSI-produktkoden också vill kontrollera MSI-produktversionen.",
+ "productVersionTooltip": "Ange appens MSI-produktversion."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Heltalsjämförelse",
+ "keyDoesNotExist": "Nyckeln finns inte",
+ "keyExists": "Nyckeln finns",
+ "stringComparison": "Strängjämförelse",
+ "valueDoesNotExist": "Värdet finns inte",
+ "valueExists": "Värdet finns",
+ "versionComparison": "Versionsjämförelse"
+ },
+ "associatedWith32Bit": "Kopplat till en 32-bitarsapp på 64-bitarsklienter",
+ "associatedWith32BitTooltip": "Välj Ja om du vill söka i 32-bitarsregistret på 64-bitarsklienter. Välj Nej (standard) om du vill söka i 64-bitarsregistret på 64-bitarsklienter. 32-bitarsklienter söker alltid i 32-bitarsregistret.",
+ "detectionMethod": "Identfieringsmetod",
+ "detectionMethodTooltip": "Välj typ av identifieringsmetod som används för att verifiera förekomsten av appen.",
+ "keyPath": "Nyckelsökväg",
+ "keyPathTooltip": "Den fullständiga sökvägen till registerposten som innehåller värdet som ska identifieras.",
+ "operator": "Operator",
+ "operatorTooltip": "Välj operator för identifieringsmetoden som används för att verifiera jämförelsen.",
+ "value": "Värde",
+ "valueName": "Värdenamn",
+ "valueNameTooltip": "Namnet på det registervärde som ska identifieras.",
+ "valueTooltip": "Välj ett värde som matchar den valda identifieringsmetoden."
+ },
+ "RuleTypeOptions": {
+ "file": "Fil",
+ "mSI": "MSI",
+ "registry": "Register"
+ },
+ "gridAriaLabel": "Identifieringsregler",
+ "header": "Skapa en regel som visar förekomst av appen.",
+ "noRulesSelectedPlaceholder": "Inga regler har angetts.",
+ "ruleTableLimit": "Du kan lägga till upp till 25 identifieringsregler",
+ "ruleType": "Regeltyp",
+ "ruleTypeTooltip": "Välj den typ av identifieringsregel du vill lägga till."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Använd ett anpassat identifieringsskript",
+ "manual": "Ställ in identifieringsregler manuellt"
+ },
+ "bladeTitle": "Identifieringsregler",
+ "header": "Ställ in appspecifika regler för att identifiera förekomst av appen.",
+ "rulesFormat": "Regelformat",
+ "rulesFormatTooltip": "Ställ antingen in identifieringsregler manuellt eller använd ett anpassat skript för att identifiera förekomst av appen.",
+ "selectorLabel": "Identifieringsregler"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Godkänn licensvillkoren för programvara från Microsoft för användares räkning",
"appSuiteConfigurationLabel": "Konfiguration av appsvit",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} språk har valts",
"xmlConfigurationLabel": "XML-konfiguration"
},
- "Filters": {
- "ruleSyntax": "Regelsyntax",
- "filters": "Filter"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Tillåt användaren att ändra inställning",
- "tooltip": "Ange om användaren får ändra inställningen."
- },
- "AllowWorkAccounts": {
- "title": "Tillåt endast arbets- eller skolkonton",
- "tooltip": " När den här inställningen är aktiverad kan användarna inte lägga till privata mejl och lagringskonton i Outlook. En användare som har ett lagt till ett privat konto i Outlook ombeds att ta bort det privata kontot. Om användaren inte tar bort det privata kontot går det inte att lägga till arbets- eller skolkontot."
- },
- "BlockExternalImages": {
- "title": "Blockera externa bilder",
- "tooltip": "När Blockera externa bilder är aktiverat går det inte att ladda ned bilder från Internet som är inbäddade i meddelandetexten. När alternativet inte är konfigurerat är standardappinställningen Av"
- },
- "ConfigureEmail": {
- "title": "Ställ in e-postkontoinställningar"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Standardsignatur för app visar om appen ska använda Skaffa Outlook för Android som standardsignatur när meddelanden skrivs. Om inställningen är Av, används ingen standardsignatur utan användarna kan lägga till egna signaturer.\r\n\r\nNär alternativet inte är konfigurerat är standardappinställningen På.",
- "iOS": "Standardsignatur för app visar om appen ska använda Skaffa Outlook för iOS som standardsignatur när meddelanden skrivs. Om inställningen är Av, används ingen standardsignatur utan användarna kan lägga till egna signaturer.\r\n\r\nNär alternativet inte är konfigurerat är standardappinställningen På."
- },
- "title": "Standardsignatur för app"
- },
- "OfficeFeedReplies": {
- "title": "Identifieringsflöde",
- "tooltip": "Identifieringsflödet täcker de Office-filer du använder mest. Det här flödet aktiveras automatiskt när Delve har aktiverats för användaren. När alternativet inte är konfigurerat är standardappinställningen På."
- },
- "OrganizeMailByThread": {
- "title": "Sortera e-post efter tråd",
- "tooltip": "Standardfunktionssättet i Outlook är att slå ihop mejlkonversationer till en trådad konversationsvy. Om inställningen är inaktiverad visas varje mejl enskilt i Outlook och grupperas inte efter tråd."
- },
- "PlayMyEmails": {
- "title": "Spela upp mina e-postmeddelanden",
- "tooltip": "Funktionen Spela upp mina e-postmeddelanden är inte aktiverad som standard i appen men visas för behöriga användare via en banderoll i inkorgen. När funktionen är inställd på Av, visas den inte för behöriga användare i appen. Användarna kan manuellt aktivera Spela upp mina e-postmeddelanden inifrån appen även när funktionen är Av. När den är inställd på Inte konfigurerat är standardappinställningen På och funktionen visas för behöriga användare."
- },
- "SuggestedReplies": {
- "title": "Föreslagna svar",
- "tooltip": "När du öppnar ett meddelande kan du få svarsförslag från Office under meddelandet. Om du markerar ett förslag på svar kan du redigera det innan du skickar det."
- },
- "SyncCalendars": {
- "title": "Synkronisera kalendrar",
- "tooltip": "Ställ in om användarna ska kunna synkronisera Outlook-kalendern med den inbyggda kalenderappen och databasen."
- },
- "TextPredictions": {
- "title": "Textförutsägelse",
- "tooltip": "Outlook kan föreslå ord och fraser medan du skriver meddelanden. Svep för att godkänna ett förslag från Outlook. När alternativet inte är konfigurerat är standardappinställningen På."
- },
- "ThemesEnabled": {
- "title": "Aktiverade teman",
- "tooltip": "Ange om användaren får använda ett anpassat visuellt tema."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS-enheter"
- },
- "ManagedDesktop": {
- "adminContacts": "Administratörskontakter",
- "appPackaging": "Appaket",
- "autopatchGroups": "Autokorrigeringsgrupper",
- "devices": "Enheter",
- "featureEnablement": "Funktionsaktivering",
- "feedback": "Feedback",
- "gettingStarted": "Komma igång",
- "messages": "Meddelanden",
- "onlineResources": "Onlineresurser",
- "policyHealth": "Principhälsa",
- "policyHealthPreview": "Principhälsa (förhandsversion)",
- "releaseManagement": "Versionshantering",
- "serviceRequests": "Tjänstförfrågningar",
- "settings": "Inställningar",
- "supportRequests": "Supportärenden",
- "tenantEnrollment": "Klientorganisationsregistrering",
- "tenantManagement": "Klientorganisationshantering"
- },
- "actions": "Åtgärder vid inkompatibilitet",
- "advancedExchangeSettings": "Exchange Online-inställningar",
- "advancedThreatProtection": "Microsoft Defender för Endpoint",
- "allApps": "Alla appar",
- "allDevices": "Alla enheter",
- "androidFotaDeployments": "Android FOTA-distributioner",
- "appBundles": "Appaket",
- "appCategories": "Appkategorier",
- "appConfigPolicies": "Appkonfigurationsprinciper",
- "appConfigurationStatus": "Status för appkonfiguration",
- "appInstallStatus": "Status för appinstallation",
- "appLicences": "Applicenser",
- "appProtectionPolicies": "Principer för appskydd",
- "appProtectionStatus": "Status för appskydd",
- "appSelectiveWipe": "Selektiv radering av app",
- "appleVppTokens": "Apple VPP-token",
- "apps": "Appar",
- "assign": "Tilldelningar",
- "assignedPermissions": "Tilldelade behörigheter",
- "assignedRoles": "Tilldelade roller",
- "autopilotDeploymentReport": "AutoPilot-distributioner (förhandsversion)",
- "autopilotDeploymentReportV2": "Autopilot-distributioner 2.0 (förhandsversion)",
- "brandingAndCustomization": "Anpassning",
- "cartProfiles": "Kundvagnsprofiler",
- "certificateConnectors": "Certifikatanslutningsprogram",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Molnanslutna enheter (förhandsversion)",
- "cloudPcActions": "Åtgärder för molnbaserad dator (förhandsversion)",
- "cloudPcMaintenanceWindows": "Underhållsperioder för molnbaserade datorer (förhandsversion)",
- "compliancePolicies": "Kompatibilitetsprinciper",
- "complianceScriptManagement": "Skript",
- "complianceScriptManagementPreview": "Skript (förhandsversion)",
- "complianceSettings": "Inställningar för efterlevnadsprinciper",
- "conditionStatements": "Villkorssatser",
- "conditions": "Platser",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Konfigurationsprofiler",
- "configurationScripts": "Konfigurationsskript",
- "connectorsAndTokens": "Anslutning och token",
- "corporateDeviceIdentifiers": "ID:n för företagsenheter",
- "customAttributes": "Anpassade attribut",
- "customNotifications": "Anpassade meddelanden",
- "deploymentSettings": "Distributionsinställningar",
- "derivedCredentials": "Härledda autentiseringsuppgifter",
- "deviceActions": "Enhetsåtgärder",
- "deviceCategories": "Enhetskategorier",
- "deviceCleanUp": "Regler för enhetsrensning",
- "deviceEnrollmentManagers": "Enhetsregistreringshanterare",
- "deviceExecutionStatus": "Enhetsstatus",
- "deviceLimitEnrollmentRestrictions": "Gränser för enhetsregistrering",
- "deviceTypeEnrollmentRestrictions": "Plattformsbegränsningar för enhetsregistrering",
- "devices": "Enheter",
- "discoveredApps": "Identifierade appar",
- "edgePolicies": "Principer för Microsoft Edge",
- "embeddedSIM": "eSIM-mobilprofiler (förhandsversion)",
- "enrollDevices": "Registrera enheter",
- "enrollmentFailures": "Registreringsfel",
- "enrollmentNotifications": "Registreringsmeddelanden (förhandsversion)",
- "enrollmentRestrictions": "Registreringsbegränsningar",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange-tjänstekopplingar",
- "failuresForCumulativeQualityUpdates": "Fel vid kumulativ kvalitetsuppdatering i Windows",
- "failuresForDriverUpdates": "Drivrutinsuppdateringsfel i Windows",
- "failuresForFeatureUpdates": "Fel vid funktionsuppdatering",
- "failuresForQualityUpdates": "Snabbuppdateringsfel i Windows",
- "featureFlighting": "Förhandsversionstestning av funktioner",
- "featureUpdateDeployments": "Funktionsuppdateringar för Windows 10 och senare",
- "flighting": "Förhandsversionstestning",
- "fotaUpdate": "OTA-uppdatering (Over The Air) av inbyggd programvara",
- "groupPolicy": "Administrativa mallar",
- "groupPolicyAnalytics": "Grupprincipanalys",
- "helpSupport": "Hjälp och support",
- "helpSupportReplacement": "Hjälp och support ({0})",
- "iOSAppProvisioning": "Etableringsprofiler för iOS-app",
- "incompleteUserEnrollments": "Ofullständiga användarregistreringar",
- "iosUpdates": "Uppdatera principer för iOS/iPadOS",
- "legacyPcManagement": "Hantering av äldre datorer",
- "macOSSoftwareUpdate": "Uppdateringsprinciper för macOS",
- "macOSSoftwareUpdateAccountSummaries": "Installationsstatus för macOS-enheter",
- "macOSSoftwareUpdateCategorySummaries": "Sammanfattning av programuppdateringar",
- "macOSSoftwareUpdateStateSummaries": "uppdateringar",
- "managedGooglePlay": "Hanterat Google Play-konto",
- "msfb": "Microsoft Store för företag",
- "myPermissions": "Mina behörigheter",
- "notifications": "Aviseringar",
- "officeApps": "Office-appar",
- "officeProPlusPolicies": "Principer för Office-appar",
- "onPremise": "Lokalt",
- "onPremisesConnector": "Exchange ActiveSync On-Premises Connector",
- "onPremisesDeviceAccess": "Exchange ActiveSync-enheter",
- "onPremisesManageAccess": "Åtkomst till Exchange lokalt",
- "outOfDateIosDevices": "Installationsfel för iOS-enheter",
- "overview": "Översikt",
- "partnerDeviceManagement": "Enhetshantering för partner",
- "perUpdateRingDeploymentState": "Per distributionsstatus för uppdateringsring",
- "permissions": "Behörigheter",
- "platformApps": "{0} appar",
- "platformDevices": "{0} enheter",
- "platformEnrollment": "{0} registrering",
- "policies": "Principer",
- "profiles": "Profiler",
- "properties": "Egenskaper",
- "reports": "Rapporter",
- "retireNoncompliantDevices": "Dra tillbaka icke-kompatibla enheter",
- "retireNoncompliantDevicesPreview": "Dra tillbaka icke-kompatibla enheter (förhandsversion)",
- "role": "Roll",
- "scriptManagement": "Skript",
- "securityBaselines": "Säkerhetsbaslinjer",
- "serviceToServiceConnector": "Exchange Online Connector",
- "servicenowConnector": "ServiceNow-anslutningsprogram",
- "shellScripts": "Shell-skript",
- "teamViewerConnector": "TeamViewer-anslutningsprogram",
- "telecomeExpenseManagement": "Kostnadsuppföljning av telekommunikation",
- "tenantAdmin": "Klientorganisationsadministratör",
- "tenantAdministration": "Administration av klientorganisation",
- "termsAndConditions": "Villkor",
- "titles": "Rubriker",
- "troubleshoot": "Felsökning",
- "troubleshootSupport": "Felsökning + support",
- "user": "Användare",
- "userExecutionStatus": "Användarstatus",
- "wdacSupplementalPolicies": "Tilläggsprinciper för S-läge",
- "win32CatalogUpdateApp": "Uppdateringar för Enterprise App Management-appar",
- "win32CatalogUpdateAppInPreview": "Uppdateringar för Windows-katalogappar (Win32) (förhandsversion)",
- "windows10DriverUpdate": "Drivrutinsuppdateringar för Windows 10 och senare",
- "windows10QualityUpdate": "Kvalitetsuppdateringar för Windows 10 och senare",
- "windows10UpdateRings": "Uppdateringringar för Windows 10 och senare",
- "windows10XPolicyFailures": "Windows 10X-principfel",
- "windows365PartnerConnector": "Windows 365 partnerkopplingar",
- "windowsDiagnosticData": "Windows-data",
- "windowsEnterpriseCertificate": "Windows Enterprise-certifikat",
- "windowsManagement": "Skript",
- "windowsSideLoadingKeys": "Nycklar för separat inläsning i Windows",
- "windowsSymantecCertificate": "Windows DigiCert-certifikat",
- "windowsThreatReport": "Agentstatus för hot"
- },
- "ScopeTypes": {
- "allDevices": "Alla enheter",
- "allUsers": "Alla användare",
- "allUsersAndDevices": "Alla användare och alla enheter",
- "selectedGroups": "Valda grupper"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search som standard",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype för företag",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone och iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Stöds inte",
+ "supportEnding": "Supporten upphör",
+ "supported": "Stöds"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Standardinställning",
- "header": "Uppdateringsprioritet",
- "postponed": "Uppskjuten",
- "priority": "Hög prioritet"
- },
- "AutoUpdateSupersededApps": {
- "label": "Automatisk uppdatering",
- "sublabel": "Om ersatta appar har installerats av användaren från Företagsportal måste du kräva att den ersatta appen installeras."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Bakgrund",
- "displayText": "Innehållsnedladdning i {0}",
- "foreground": "Foreground",
- "header": "Prioritet för leveransoptimering"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Tillåt användaren att snooza omstartsmeddelande",
- "countdownDialog": "Välj när dialogrutan för nedräkning till omstart ska visas innan omstart sker (minuter)",
- "durationInMinutes": "Respitperiod för omstart av enhet (minuter)",
- "snoozeDurationInMinutes": "Välj snooze-tid (minuter)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Tidszon",
- "local": "Enhetens tidszon",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Datum och tid",
- "deadlineTimeColumnLabel": "Tidsgräns för installation",
- "deadlineTimeDatePickerErrorMessage": "Det valda datumet måste infalla efter det tillgängliga datumet",
- "deadlineTimeLabel": "Tidsgräns för appinstallation",
- "defaultTime": "Så snart som möjligt",
- "infoText": "Det här programmet blir tillgängligt så fort det har distribuerats, såvida du inte anger en tillgänglighetstid nedan. Om det är ett nödvändigt program kan du ange en tidsgräns för installationen.",
- "specificTime": "Ett visst datum och tid",
- "startTimeColumnLabel": "Tillgänglighet",
- "startTimeDatePickerErrorMessage": "Det valda datumet måste infalla före tidsgränsdatumet",
- "startTimeLabel": "Apptillgänglighet"
- },
- "restartGracePeriodHeader": "Respitperiod för omstart",
- "restartGracePeriodLabel": "Respitperiod för omstart av enhet",
- "summaryTitle": "Slutanvändarupplevelse"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "Filen eller mappen enligt angivet krav.",
- "pathToolTip": "Den fullständiga sökvägen till den fil eller mapp som ska identifieras.",
- "property": "Egenskap",
- "valueToolTip": "Välj ett kravvärde som matchar den valda identifieringsmetoden. Krav på datum och tid måste anges i lokalt format."
- },
- "GridColumns": {
- "pathOrScript": "Sökväg/skript",
- "type": "Typ"
- },
- "Registry": {
- "keyPath": "Nyckelsökväg",
- "keyPathTooltip": "Den fullständiga sökvägen till registerposten som innehåller värdet enligt krav.",
- "operator": "Operator",
- "operatorTooltip": "Välj operator för jämförelsen.",
- "registryRequirement": "Registernyckelkrav",
- "registryRequirementTooltip": "Välj jämförelse av registernyckelkrav.",
- "valueName": "Värdenamn",
- "valueNameTooltip": "Namnet på begärt registervärde."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Godkänn automatiskt alla rekommenderade drivrutinsuppdateringar",
+ "manual": "Godkänn och distribuera drivrutinsuppdateringar manuellt"
+ },
+ "BulkActions": {
+ "button": "Massåtgärder"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Godkännandemetod:"
},
- "RequirementTypeOptions": {
- "fileType": "Fil",
- "registry": "Register",
- "script": "Skript"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Boolesk",
- "dateTime": "Datum och tid",
- "float": "Flyttal",
- "integer": "Heltal",
- "string": "Sträng",
- "version": "Version"
- },
- "duplicateName": "Skriptnamnet {0} har redan använts. Ange ett annat namn.",
- "enforceSignatureCheck": "Framtvinga signaturkontroll av skript",
- "enforceSignatureCheckTooltip": "Välj Ja om du vill kontrollera att skriptet har signerats av en betrodd utgivare så att skriptet körs utan varningar eller uppmaningar. Skriptet körs avblockerat. Välj Nej (standard) om du vill köra skriptet med slutanvändarens bekräftelse men utan signaturkontroll.",
- "loggedOnCredentials": "Kör det här skriptet med inloggningsuppgifterna",
- "loggedOnCredentialsTooltip": "Kör skript med enhetens inloggningsuppgifter.",
- "operatorTooltip": "Välj operator för kravjämförelsen.",
- "requirementMethod": "Välj typ av utdata",
- "requirementMethodTooltip": "Välj den datatyp som används vid fastställande av krav på identifieringsmatchning.",
- "scriptContent": "Skriptinnehåll",
- "scriptFile": "Skriptfil",
- "scriptFileTooltip": "Välj ett PowerShell-skript som identifierar förekomst av appen på klienten. Om appen har identifierats visar kravprocessen en slutkod med värdet 0 och skriver strängvärdet STDOUT.",
- "scriptName": "Skriptets namn",
- "value": "Värde",
- "valueTooltip": "Välj ett kravvärde som matchar den valda identifieringsmetoden. Krav på datum och tid måste anges i lokalt format."
+ "DeploymentDeferralInDays": {
+ "label": "Gör uppdateringar tillgängliga efter",
+ "units": "(dagar)",
+ "value": "{0} dagar"
+ },
+ "DriverAction": {
+ "header": "Välj en åtgärd nedan.",
+ "label": "Drivrutinsåtgärd",
+ "placeholder": "Välj en åtgärd"
},
- "bladeTitle": "Lägg till en kravregel",
- "createRequirementHeader": "Skapa ett krav.",
- "header": "Ställ in ytterligare kravregler",
- "label": "Ytterligare kravregler",
- "noRequirementsSelectedPlaceholder": "Inga krav har angetts.",
- "requirementType": "Kravtyp",
- "requirementTypeTooltip": "Välj typ av identifieringsmetod som ska användas för att fastställa hur ett krav ska utvärderas."
- },
- "architectures": "Operativsystemarkitektur",
- "architecturesTooltip": "Välj de arkitekturer som behövs för att installera appen.",
- "bladeTitle": "Krav",
- "diskSpace": "Diskutrymme som krävs (MB)",
- "diskSpaceTooltip": "Ledigt diskutrymme som krävs på systemenheten för att installera appen.",
- "header": "Ange krav som måste uppfyllas på enheterna innan appen kan installeras:",
- "maximumTextFieldValue": "Det här värdet måste åtminstone vara {0}.",
- "minimumCpuSpeed": "Lägsta processorhastighet som krävs (MHz)",
- "minimumCpuSpeedTooltip": "Lägsta processorhastighet som krävs för att installera appen.",
- "minimumLogicalProcessors": "Lägsta antal logiska processorer som krävs",
- "minimumLogicalProcessorsTooltip": "Lägsta antal logiska processorer som behövs för att installera appen.",
- "minimumOperatingSystem": "Lägsta operativsystemsversion",
- "minimumOperatingSystemTooltip": "Välj det minimioperativsystem som behövs för att installera appen.",
- "minumumTextFieldValue": "Värdet måste vara minst {0}.",
- "physicalMemory": "Fysiskt minne som krävs (MB)",
- "physicalMemoryTooltip": "Fysiskt minne (RAM) som krävs för att installera appen.",
- "selectorLabel": "Krav",
- "validNumber": "Ange ett giltigt tal."
- },
- "PolicySet": {
- "appManagement": "Programhantering",
- "assignments": "Tilldelningar",
- "basics": "Grundläggande inställningar",
- "deviceEnrollment": "Enhetsregistrering",
- "deviceManagement": "Enhetshantering",
- "scopeTags": "Omfångstaggar",
- "appConfigurationTitle": "Appkonfigurationsprinciper",
- "appProtectionTitle": "Principer för appskydd",
- "appTitle": "Appar",
- "iOSAppProvisioningTitle": "Etableringsprofiler för iOS-app",
- "deviceLimitRestrictionTitle": "Begränsningar för antal enheter",
- "deviceTypeRestrictionTitle": "Begränsningar av enhetstyp",
- "enrollmentStatusSettingTitle": "Registreringsstatussidor",
- "windowsAutopilotDeploymentProfileTitle": "Windows Autopilot-distributionsprofiler",
- "deviceComplianceTitle": "Efterlevnadsprinciper för enhet",
- "deviceConfigurationTitle": "Profiler för enhetskonfigurationer",
- "powershellScriptTitle": "PowerShell-skript"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Drivrutiner som ingår"
+ },
+ "SelectDrivers": {
+ "header": "Välj drivrutiner som ska ingå i massåtgärden"
+ },
+ "SelectDriversToInclude": {
+ "button": "Välj drivrutiner som ska inkluderas"
+ },
+ "SelectLessDrivers": {
+ "validation": "Högst hundra drivrutiner kan väljas"
+ },
+ "SelectMoreDrivers": {
+ "validation": "Minst en drivrutin ska väljas"
+ },
+ "SelectedDrivers": {
+ "label": "Valda drivrutiner"
+ },
+ "availabilityDate": "Gör tillgängligt i Windows Update",
+ "bladeTitle": "Drivrutinsuppdateringar Windows 10 och senare (förhandsversion)",
+ "lastSync": "Senaste synkronisering:",
+ "lastSyncDefaultText": "Väntar på inledande inventeringsinsamling",
+ "loadError": "Det gick inte att läsa in!"
+ },
+ "DriverStatus": {
+ "approved": "Godkänd",
+ "declined": "Avböjt",
+ "export": "Exporterar rekommenderade drivrutiner",
+ "needsReview": "Behöver granskas",
+ "paused": "Pausad"
+ },
+ "DriversToReview": {
+ "text": "{0} att granska"
+ },
+ "Subtitle": {
+ "automatic": "Princip för automatisk uppdatering av godkännandedrivrutin",
+ "manual": "Uppdateringsprincip för manuell godkännandedrivrutin"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Rekommenderas",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrain",
- "countryNameZA": "Sydafrika",
- "countryNameJO": "Jordanien",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Tjeckien",
- "countryNameLT": "Litauen",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hongkong SAR",
- "countryNameGH": "Ghana",
- "countryNameSA": "Saudiarabien",
- "countryNamePG": "Papua Nya Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "Indien",
- "countryNameHN": "Honduras",
- "countryNameRO": "Rumänien",
- "countryNameKZ": "Kazakstan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Georgien",
- "countryNameTT": "Trinidad och Tobago",
- "countryNameMP": "Nordmarianerna",
- "countryNameMV": "Maldiverna",
- "countryNameFI": "Finland",
- "countryNameNO": "Norge",
- "countryNameEE": "Estland",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Uzbekistan",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tadzjikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "Frankrike",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italien",
- "countryNameAZ": "Azerbajdzjan",
- "countryNameKG": "Kirgizistan",
- "countryNameWF": "Wallis och Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falklandsöarna",
- "countryNameGY": "Guyana",
- "countryNameSS": "Sydsudan",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Syrien",
- "countryNameMD": "Moldavien",
- "countryNameVC": "Saint Vincent och Grenadinerna",
- "countryNameID": "Indonesien",
- "countryNameRE": "Réunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "Nordmakedonien",
- "countryNameTG": "Togo",
- "countryNamePF": "Franska Polynesien",
- "countryNameKY": "Caymanöarna",
- "countryNameIO": "Brittiska territoriet i Indiska Oceanen",
- "countryNameRU": "Ryssland",
- "countryNameMA": "Marocko",
- "countryNameAU": "Australien",
- "countryNameBO": "Bolivia",
- "countryNameVA": "Heliga stolen (Vatikanstaten)",
- "countryNameVG": "Brittiska Jungfruöarna",
- "countryNameFM": "Mikronesien",
- "countryNameAQ": "Antarktis",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brasilien",
- "countryNameIS": "Island",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgarien",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamas",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macao SAR",
- "countryNameRW": "Rwanda",
- "countryNameAS": "Amerikanska Samoa",
- "countryNameBQ": "Bonaire, Sint Eustatius och Saba",
- "countryNameMF": "Saint Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "Nya Kaledonien",
- "countryNameAC": "Ascensionön",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladesh",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Kanada",
- "countryNameSH": "Sankta Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongoliet",
- "countryNamePA": "Panama",
- "countryNameCM": "Kamerun",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japan",
- "countryNameCY": "Cypern",
- "countryNameCD": "Demokratiska republiken Kongo",
- "countryNameTN": "Tunisien",
- "countryNameTR": "Turkiet",
- "countryNameWS": "Samoa",
- "countryNameSE": "Sverige",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Kambodja",
- "countryNamePL": "Polen",
- "countryNameDZ": "Algeriet",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominica",
- "countryNameEG": "Egypten",
- "countryNameGF": "Franska Guyana",
- "countryNameNZ": "Nya Zeeland",
- "countryNamePS": "Den palestinska myndigheten",
- "countryNameIL": "Israel",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Grekland",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauretanien",
- "countryNameVI": "Amerikanska Jungfruöarna",
- "countryNameGQ": "Ekvatorialguinea",
- "countryNameMX": "Mexiko",
- "countryNameDJ": "Djibouti",
- "countryNameGN": "Guinea",
- "countryNameCN": "Kina",
- "countryNameMZ": "Moçambique",
- "countryNameBV": "Bouvetön",
- "countryNameNF": "Norfolkön",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "Sydgeorgien och Sydsandwichöarna",
- "countryNameRS": "Serbien",
- "countryNameCC": "Kokosöarna",
- "countryNameNA": "Namibia",
- "countryNameDE": "Tyskland",
- "countryNameCG": "Republiken Kongo",
- "countryNameKW": "Kuwait",
- "countryNameMH": "Marshallöarna",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Vitryssland",
- "countryNameMY": "Malaysia",
- "countryNameST": "São Tomé och Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Tchad",
- "countryNameCX": "Julön",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bissau",
- "countryNameUA": "Ukraina",
- "countryNameCU": "Kuba",
- "countryNameCO": "Colombia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Kroatien",
- "countryNameSC": "Seychellerna",
- "countryNameNL": "Nederländerna",
- "countryNameUM": "Förenta staternas mindre öar i Oceanien och Västindien",
- "countryNameIM": "Isle of Man",
- "countryNameFJ": "Fiji",
- "countryNameSR": "Surinam",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "Storbritannien",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovenien",
- "countryNameAM": "Armenien",
- "countryNameAR": "Argentina",
- "countryNamePM": "Saint Pierre och Miquelon",
- "countryNameTF": "De franska territorierna i södra Indiska oceanen",
- "countryNameDO": "Dominikanska republiken",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugal",
- "countryNameCF": "Centralafrikanska republiken",
- "countryNameBE": "Belgien",
- "countryNameKM": "Komorerna",
- "countryNameLY": "Libyen",
- "countryNameIE": "Irland",
- "countryNameKP": "Nordkorea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slovakien",
- "countryNameTC": "Turks- och Caicosöarna",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Jemen",
- "countryNameBA": "Bosnien och Hercegovina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Irak",
- "countryNameSJ": "Svalbard och Jan Mayen",
- "countryNameAX": "Åland",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Färöarna",
- "countryNameBL": "Saint Barthélemy",
- "countryNameLB": "Libanon",
- "countryNameJM": "Jamaica",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Spanien",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapore",
- "countryNameAL": "Albanien",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Swaziland",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d’Ivoire",
- "countryNameTW": "Taiwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cooköarna",
- "countryNameTH": "Thailand",
- "countryNameHM": "Heardön och McDonaldöarna",
- "countryNameGD": "Grenada",
- "countryNameUS": "USA",
- "countryNameAT": "Österrike",
- "countryNameKR": "Sydkorea",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Danmark",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Etiopien",
- "countryNameMG": "Madagaskar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxemburg",
- "countryNameQA": "Qatar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Salomonöarna",
- "countryNameAE": "Förenade Arabemiraten",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua och Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Ungern",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Schweiz",
- "countryNamePN": "Pitcairn",
- "countryNameGL": "Grönland",
- "countryNamePH": "Filippinerna",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts och Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Lettland",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "Det går inte att synkronisera {0}",
+ "failureDescription": "Vi påträffade ett fel och kunde inte slutföra den begärda synkroniseringen. Försök igen.",
+ "pending": "{0} synkronisering pågår",
+ "pendingDescription": "Vi hämtar de senaste data. Den här processen kan ta flera minuter.",
+ "success": "{0} synkroniseringen är klar",
+ "successDescription": "Synkronisering med WUfB-tjänsten slutfördes {0}"
+ },
+ "SyncSpinner": {
+ "text": "En synkronisering pågår. Det kan ta flera minuter. Leta efter en avisering eller kom tillbaka om några minuter."
+ },
+ "TabName": {
+ "basics": "Grundläggande information",
+ "driverUpdateSettings": "Inställningar",
+ "otherDrivers": "Andra drivrutiner",
+ "properties": "Egenskaper",
+ "recommendedDrivers": "Rekommenderade drivrutiner"
+ },
+ "driverAddFilter": "Lägg till filter",
+ "driverApplicableDevices": "Tillämpliga enheter",
+ "driverApprovalStatus": "Status",
+ "driverBulkActions": "Massåtgärder",
+ "driverClass": "Drivrutinsklass",
+ "driverCount": "Visar {0} till {1} av {2} poster",
+ "driverFilterNoneSelected": "Inga valda",
+ "driverManufacturer": "Tillverkare",
+ "driverName": "Drivrutinsnamn",
+ "driverNameLower": "drivrutinsuppdateringsdistribution för windows",
+ "driverNameUpper": "drivrutinsuppdateringsdistribution för Windows",
+ "driverRefresh": "Uppdatera",
+ "driverReleaseDate": "Utgivningsdatum",
+ "driverSearch": "Sök",
+ "driverSearchKeyword": "Ange sökord",
+ "driverVersion": "Version",
+ "firstDeploymentDate": "Första distribution",
+ "infoBoxText": "Inventeringen kan ta upp till 24 timmar att fylla efter att en princip har tilldelats och skapats.",
+ "textBlockText": "Välj inställningar för principgodkännande och distribution. Välj att konfigurera en princip för att godkänna och distribuera uppdateringar automatiskt eller manuellt. Det går inte att ändra godkännandemetoden när en princip har skapats, men det går att ändra enskilda drivrutinsgodkännanden och distributionsinformation när en inventering har skapats för tilldelade enheter."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge-konfigurationsinställningar",
+ "edgeWindowsDataProtectionSettings": "Edge-dataskyddsinställningar (Windows) – förhandsversion",
+ "edgeWindowsSettings": "Edge-konfigurationsinställningar (Windows) – förhandsversion",
+ "generalAppConfig": "Allmän appkonfiguration",
+ "generalSettings": "Allmänna konfigurationsinställningar",
+ "outlookSMIMEConfig": "Outlook S/MIME-inställningar",
+ "outlookSettings": "Outlook-konfigurationsinställningar",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-tr.json b/Documentation/Strings-tr.json
index 46f39af..6de9e70 100644
--- a/Documentation/Strings-tr.json
+++ b/Documentation/Strings-tr.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "Veri Koruması yapılandırması"
- },
- "OrganizeMailByThread": {
- "title": "Postaları yazışmaya göre düzenleme",
- "tooltip": "Outlook varsayılan olarak, posta konuşmalarını yazışmalardan oluşan bir görüşme görünümünde toplar. Bu ayar devre dışı bırakılırsa Outlook her bir postayı ayrı ayrı görüntüler ve bunları yazışmaya göre gruplandırmaz."
- },
- "Sync": {
- "header": "Kişi alanlarını yerel kişiler uygulaması yapılandırmasıyla eşitle"
- },
- "allowBiometricsAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
- "allowBiometricsTitle": "Uygulamaya Erişmek için Biyometriyi Gerekli Kıl",
- "allowBiometricsTooltip": "Kullanıcıların cihazlarında uygulamaya erişmeleri için TouchID veya FaceID gibi biyometrik bilgiler gerekebilir. Bu bilgiler gerekli kılındığında, bu profilde seçilen kimlik doğrulaması yöntemine ek olarak kullanılır. Uygulama koruma ilkesi yönetilen verilere erişim öncesinde erişim gereksinimleri içerdiğinden bu ayar, Intune Uygulama Koruma İlkeleri dağıtıldığında etkinleştirilmemelidir. Her ikisinin de etkinleştirilmesi, Outlook mobile erişim için birden fazla erişim isteğiyle sonuçlanır. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
- "allowCalendarNotificationsAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
- "allowCalendarNotificationsTitle": "Takvim Bildirimleri",
- "allowCalendarNotificationsTooltip": "\"Kuruluş verileri bildirimleri\" Uygulama Koruma İlkesi ayarı \"Kuruluş Verilerini Engelle\" olarak ayarlandığında takvim bildirimlerinin tam ayrıntıları görüntülemesine izin ver.",
- "allowDefaultAppSignatureTitle": "Varsayılan Uygulama İmzası",
- "allowDefaultAppSignatureTooltip": "Varsayılan uygulama imzası, uygulamanın ileti oluşturma sırasında varsayılan imza olarak “iOS için Outlook'u edinin” imzasını kullanıp kullanmayacağını belirtir. Ayar Kapalı olarak yapılandırıldıysa varsayılan imza kullanılmaz, ancak kullanıcılar kendi imzalarını ekleyebilir. Yapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak ayarlanır.",
- "allowExternalRecipientsMailTipTitle": "Dış Alıcılar Posta İpucu",
- "allowExternalRecipientsMailTipTooltip": "Dış Alıcılar Posta İpucu, gönderenin bir dış alıcı veya dış alıcı içeren bir dağıtım grubu eklemesi durumunda görüntülenir. Bu Posta İpucu, gönderenleri oluşturdukları iletinin kuruluş dışına çıkıp çıkmayacağı konusunda bilgilendirerek sözcük seçimi, üslup ve içerik konusunda doğru kararlar alınmasına yardımcı olur. Yalnızca hibrit modern kimlik doğrulamasından yararlanan Exchange Online hesapları ve şirket hesapları için kullanılabilir. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık'tır.",
- "allowFocusedInboxTitle": "Odaklanmış Gelen Kutusu",
- "allowFocusedInboxTooltip": "Odaklanmış Gelen Kutusu, gelen kutunuzu iki sekmeye ayırır: Odaklanmış ve Diğer. En önemli e-postalarınız Odaklanmış sekmesindeyken diğerleri kolayca ulaşılabilir ancak gözden uzak bir yerde, Diğer sekmesinde durur. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
- "allowMailNotificationsAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
- "allowMailNotificationsTitle": "Posta Bildirimleri",
- "allowMailNotificationsTooltip": "Bu değer, Outlook'un e-posta bildirimlerine izin verip vermeyeceğini belirtir. Değerin Hayır olarak ayarlanması, e-posta bildirimlerini devre dışı bırakır.",
- "allowOrgDataOnWearablesTitle": "Giyilebilir Cihazlarda Kuruluş Verileri",
- "allowOrgDataOnWearablesTooltip": "Bu değer, Outlook'un giyilebilir bir cihazla eşitlenip eşitlenemeyeceğini belirtir. Değerin Hayır olarak ayarlanması, giyilebilir cihaz eşitlemesini devre dışı bırakır.",
- "allowSaveContactsAllowUserChangeTooltip": "Kullanıcının kişi eşitleme ayarını değiştirmesine izin verilip verilmediğini belirtin.",
- "allowSaveContactsTitle": "Kişileri Kaydet",
- "allowSaveContactsTooltip": "Mobil cihazın yerel adres defterine kişi kaydetmek, yeni aramaların ve kısa mesajların kullanıcının mevcut Outlook kişilerine bağlanmasını sağlar. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
- "allowSmartReplyTitle": "Önerilen Yanıtlar",
- "allowSmartReplyTooltip": "Bir iletiyi açtığınızda, Outlook iletinin altında yanıtlar önerebilir. Önerilen bir yanıtı seçerseniz, göndermeden önce yanıtı düzenleyebilirsiniz. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık'tır.",
- "allowUserChangeGeneralToolTip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
- "allowUserChangeTitle": "Kullanıcının ayar değiştirmesine izin ver",
- "blockExternalImagesAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
- "blockExternalImagesTitle": "Harici Görüntüleri Engelle",
- "blockExternalImagesTooltip": "Harici görüntüleri engelleme özelliği etkinleştirildiğinde uygulama İnternet'te barındırılan ve ileti gövdesine ekli görüntülerin indirilmesini engeller. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
- "disableAddinsTitle": "Eklentilere İzin Ver",
- "disableAddinsTooltip": "Varsayılan olarak bir Uygulama Koruma İlkesi, kullanıcıların üçüncü taraf eklentileri kullanmasına izin verir, ancak \"İlke tarafından yönetilen uygulama verilerini yerel uygulamalarla veya eklentilerle eşitleme\" ayarıyla eklentileri engellemek için kullanılabilir. Bu ayarın \"Kapalı\" olarak yapılandırılması, Uygulama Koruma İlkesi ayarı İzin Verildi olarak ayarlandığında eklentileri engeller.",
- "discoverFeedTitle": "Keşif Akışı",
- "discoverFeedTooltip": "Keşif Akışı, en sık erişilen Office dosyalarınızı öne çıkarır. Kullanıcı için Delve etkinleştirildiğinde, bu akış da varsayılan olarak etkinleştirilir. Yapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak belirlenir.",
- "enableSMIMETitle": "S/MIME'yi etkinleştir",
- "enableSMIMETooltip": "E-posta oluştururken S/MIME denetimlerinin etkin olup olmayacağını belirtin.",
- "encryptAllEmails": "Tüm e-postaları şifrele",
- "encryptAllEmailsAllowUserChangeTooltip": "Kullanıcının, Tüm e-postaları şifrele ayarını değiştirmesine izin verilip verilmediğini belirtin.",
- "encryptAllEmailsTooltip": "Tüm e-postaların şifrelenip şifrelenmeyeceğini belirtin. Şifreleme, verileri şifre metnine dönüştürdüğünden metni yalnızca hedeflenen alıcı okuyabilir.",
- "ldapUrl": "LDAP URL'si",
- "ldapUrlTooltip": "Bu, istemcilerin e-posta alıcıları için genel şifreleme anahtarlarını alabileceği LDAP ana bilgisayar adıdır. Anahtar kullanılabilir olduğunda e-postalar şifrelenir. Desteklenen biçimler:\r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
- "nativeCalendarSyncAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
- "nativeCalendarSyncMAMOnlyTitle": "Takvim Eşitlemesine İzin Ver",
- "nativeCalendarSyncMAMOnlyTooltip": "Varsayılan olarak Uygulama Koruma İlkesi, yerel Takvim uygulamasıyla takvim eşitlemesine izin verir ancak Takvim eşitlemesi kullanılabilirliğini engellemek için kullanılabilir. Bu ayar, Uygulama Koruma İlkesi ayarından bağımsız olarak çalışır ve kuruluşların iş veya okul hesabı için takvim eşitlemesinin kullanılıp kullanılamayacağını belirlemesine olanak tanır.",
- "nativeCalendarSyncTitle": "Takvimleri Eşitle",
- "nativeCalendarSyncTooltip": "Varsayılan olarak, bir Uygulama Koruma İlkesi, yerel Takvim uygulamasıyla takvim eşitlemesi sağlar, ancak \"İlke ile yönetilen uygulama verilerini yerel uygulamalarla eşitleme\" ayarıyla takvim eşitlemesinin kullanılabilirliğini engellemek için kullanılabilir. Bu ayarın \"Kapalı\" olarak yapılandırılması, Uygulama Koruma İlkesi ayarı İzin Verildi olarak ayarlandığında takvim eşitlemesini engeller.",
- "playMyEmailsTitle": "E-postalarımı Oynat",
- "playMyEmailsTooltip": "E-postalarımı Oynat özelliği uygulamada varsayılan olarak etkin değildir ancak uygun kullanıcıların gelen kutusunda bir başlık olarak öne çıkarılır. Kapalı olarak ayarlandığında, bu özellik uygulamada uygun kullanıcılar için öne çıkarılmaz. Bu özellik Kapalı olarak ayarlansa bile kullanıcılar, E-postalarımı Oynat özelliğini uygulamadan el ile etkinleştirmeyi seçebilir. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık olur ve özellik uygun kullanıcılar için öne çıkarılır.",
- "signAllEmails": "Tüm e-postaları imzala",
- "signAllEmailsAllowUserChangeTooltip": "Kullanıcının, Tüm e-postaları imzala ayarını değiştirmesine izin verilip verilmediğini belirtin.",
- "signAllEmailsTooltip": "Tüm e-postaların imzalanıp imzalanmayacağını belirtin. Dijital imza, e-postanın gerçek olduğunu doğrular ve aktarım sırasında içerikle oynanmamasını sağlar.",
- "syncAddressTitle": "Adres",
- "syncAddressTooltip": "Bu değer, kişinin adresinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncBirthdayTitle": "Doğum günü",
- "syncBirthdayTooltip": "Bu değer, kişinin doğum gününün yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncCompanyTitle": "Şirket",
- "syncCompanyTooltip": "Bu değer, kişinin şirket adının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncDepartmentTitle": "Bölüm",
- "syncDepartmentTooltip": "Bu değer, kişinin departmanının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncEmailAddressTitle": "E-posta Adresi",
- "syncEmailAddressTooltip": "Bu değer, kişinin e-posta adresinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncInstantMessagingAddressTitle": "Anlık İleti Adresi",
- "syncInstantMessagingAddressTooltip": "Bu değer, kişinin anlık ileti adresinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncJobTitleTitle": "İş unvanı",
- "syncJobTitleTooltip": "Bu değer, kişinin iş unvanının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncNicknameTitle": "Takma ad",
- "syncNicknameTooltip": "Bu değer, kişinin takma adının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncNotesTitle": "Notes",
- "syncNotesTooltip": "Bu değer, kişinin notlarının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncPhoneHomeFaxNumberTitle": "Ev Faksı Numarasını Ara",
- "syncPhoneHomeFaxNumberTooltip": "Bu değer, kişinin ev faksı numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncPhoneHomeNumberTitle": "Ev Telefonu Numarasını Ara",
- "syncPhoneHomeNumberTooltip": "Bu değer, kişinin ev telefonu numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncPhoneMobileNumberTitle": "Cep Telefonu Numarasını Ara",
- "syncPhoneMobileNumberTooltip": "Bu değer, kişinin cep telefonu numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncPhoneOtherNumberTitle": "Diğer Numarayı Ara",
- "syncPhoneOtherNumberTooltip": "Bu değer, kişinin diğer telefon numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncPhonePagerNumberTitle": "Çağrı Cihazı Numarasını Ara",
- "syncPhonePagerNumberTooltip": "Bu değer, kişinin çağrı cihazı numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncPhoneWorkFaxNumberTitle": "İş Faksı Numarasını Ara",
- "syncPhoneWorkFaxNumberTooltip": "Bu değer, kişinin iş faksı numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncPhoneWorkNumberTitle": "İş Telefonu Numarasını Ara",
- "syncPhoneWorkNumberTooltip": "Bu değer, kişinin iş telefonu numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncPrefixTitle": "Ad Öneki",
- "syncPrefixTooltip": "Bu değer, kişinin ad ön ekinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "syncSuffixTitle": "Ad Soneki",
- "syncSuffixTooltip": "Bu değer, kişinin ad son ekinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
- "textPredictionsTitle": "Metin Tahminleri",
- "textPredictionsTooltip": "Outlook, siz ileti oluştururken sözcük ve tümceler önerebilir. Outlook öneri sunduğunda öneriyi kabul etmek için kaydırın. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık olarak ayarlanır.",
- "themesEnabledTitle": "Temalar Etkin",
- "themesEnabledTooltip": "Kullanıcının özel görsel tema kullanmasına izin verilip verilmediğini belirtin."
- },
- "Languages": {
- "ar-aE": "Arapça (B.A.E.)",
- "ar-bH": "Arapça (Bahreyn)",
- "ar-dZ": "Arapça (Cezayir)",
- "ar-eG": "Arapça (Mısır)",
- "ar-iQ": "Arapça (Irak)",
- "ar-jO": "Arapça (Ürdün)",
- "ar-kW": "Arapça (Kuveyt)",
- "ar-lB": "Arapça (Lübnan)",
- "ar-lY": "Arapça (Libya)",
- "ar-mA": "Arapça (Fas)",
- "ar-oM": "Arapça (Umman)",
- "ar-qA": "Arapça (Katar)",
- "ar-sA": "Arapça (Suudi Arabistan)",
- "ar-sY": "Arapça (Suriye)",
- "ar-tN": "Arapça (Tunus)",
- "ar-yE": "Arapça (Yemen)",
- "az-cyrl": "Azerice (Kiril, Azerbaycan)",
- "az-latn": "Azerice (Latin, Azerbaycan)",
- "bn-bD": "Bengalce (Bangladeş)",
- "bn-iN": "Bengalce (Hindistan)",
- "bs-cyrl": "Boşnakça (Kiril)",
- "bs-latn": "Boşnakça (Latin)",
- "zh-cN": "Çince (ÇHC)",
- "zh-hK": "Çince (Hong Kong ÖİB)",
- "zh-mO": "Çince (Macao ÖİB)",
- "zh-sG": "Çince (Singapur)",
- "zh-tW": "Çince (Tayvan)",
- "hr-bA": "Hırvatça (Latin)",
- "hr-hR": "Hırvatça (Hırvatistan)",
- "nl-bE": "Felemenkçe (Belçika)",
- "nl-nL": "Felemenkçe (Hollanda)",
- "en-aU": "İngilizce (Avustralya)",
- "en-bZ": "İngilizce (Belize)",
- "en-cA": "İngilizce (Kanada)",
- "en-cabn": "İngilizce (Karayipler)",
- "en-iE": "İngilizce (İrlanda)",
- "en-iN": "İngilizce (Hindistan)",
- "en-jM": "İngilizce (Jamaika)",
- "en-mY": "İngilizce (Malezya)",
- "en-nZ": "İngilizce (Yeni Zelanda)",
- "en-pH": "İngilizce (Filipinler Cumhuriyeti)",
- "en-sG": "İngilizce (Singapur)",
- "en-tT": "İngilizce (Trinidad ve Tobago)",
- "en-uK": "İngilizce (Birleşik Krallık)",
- "en-uS": "İngilizce (Amerika Birleşik Devletleri)",
- "en-zA": "İngilizce (Güney Afrika)",
- "en-zW": "İngilizce (Zimbabve)",
- "fr-bE": "Fransızca (Belçika)",
- "fr-cA": "Fransızca (Kanada)",
- "fr-cH": "Fransızca (İsviçre)",
- "fr-fR": "Fransızca (Fransa)",
- "fr-lU": "Fransızca (Luksemburg)",
- "fr-mC": "Fransızca (Monako)",
- "de-aT": "Almanca (Avusturya)",
- "de-cH": "Almanca (İsviçre)",
- "de-dE": "Almanca (Almanya)",
- "de-lI": "Almanca (Liechtenstein)",
- "de-lU": "Almanca (Luksemburg)",
- "iu-cans": "İnuit dili (Hece yazısı, Kanada)",
- "iu-latn": "İnuit dili (Latin, Kanada)",
- "it-cH": "İtalyanca (İsviçre)",
- "it-iT": "İtalyanca (İtalya)",
- "ms-bN": "Malay dili (Brunei Sultanlığı)",
- "ms-mY": "Malay dili (Malezya)",
- "mn-cN": "Moğolca (Geleneksel Moğolca, ÇHC)",
- "mn-mN": "Moğolca (Kiril, Moğolistan)",
- "no-nB": "Norveççe, Bokmål (Norveç)",
- "no-nn": "Norveç dili (Nynorsk, (Norveç)",
- "pt-bR": "Portekizce (Brezilya)",
- "pt-pT": "Portekizce (Portekiz)",
- "quz-bO": "Keçuva dili (Bolivya)",
- "quz-eC": "Keçuva dili (Ekvador)",
- "quz-pE": "Keçuva dili (Peru)",
- "smj-nO": "Sami, Lule (Norveç)",
- "smj-sE": "Sami, Lule (İsveç)",
- "se-fI": "Sami, Kuzey (Finlandiya)",
- "se-nO": "Sami, Kuzey (Norveç)",
- "se-sE": "Sami, Kuzey (İsveç)",
- "sma-nO": "Sami, Güney (Norveç)",
- "sma-sE": "Sami, Güney (İsveç)",
- "smn": "Sami, Inari (Finlandiya)",
- "sms": "Sami, Skolt (Finlandiya)",
- "sr-Cyrl-bA": "Sırpça (Kiril)",
- "sr-Cyrl-rS": "Sırpça (Kiril, Sırbistan ve Karadağ)",
- "sr-Latn-bA": "Sırpça (Latin)",
- "sr-Latn-rS": "Sırpça (Latin, Sırbistan)",
- "dsb": "Aşağı Sorb dili (Almanya)",
- "hsb": "Yukarı Sorb dili (Almanya)",
- "es-es-tradnl": "İspanyolca (İspanya, Geleneksel Sıralama)",
- "es-aR": "İspanyolca (Arjantin)",
- "es-bO": "İspanyolca (Bolivya)",
- "es-cL": "İspanyolca (Şili)",
- "es-cO": "İspanyolca (Kolombiya)",
- "es-cR": "İspanyolca (Kosta Rika)",
- "es-dO": "İspanyolca (Dominik Cumhuriyeti)",
- "es-eC": "İspanyolca (Ekvator)",
- "es-eS": "İspanyolca (İspanya)",
- "es-gT": "İspanyolca (Guatemala)",
- "es-hN": "İspanyolca (Honduras)",
- "es-mX": "İspanyolca (Meksika)",
- "es-nI": "İspanyolca (Nikaragua)",
- "es-pA": "İspanyolca (Panama)",
- "es-pE": "İspanyolca (Peru)",
- "es-pR": "İspanyolca (Porto Riko)",
- "es-pY": "İspanyolca (Paraguay)",
- "es-sV": "İspanyolca (El Salvador)",
- "es-uS": "İspanyolca (Amerika Birleşik Devletleri)",
- "es-uY": "İspanyolca (Uruguay)",
- "es-vE": "İspanyolca (Venezuela)",
- "sv-fI": "İsveç dili (Finlandiya)",
- "uz-cyrl": "Özbekçe (Kiril, Özbekistan)",
- "uz-latn": "Özbekçe (Latin, Özbekistan)",
- "af": "Afrikaner dili (Güney Afrika)",
- "sq": "Arnavutça (Arnavutluk)",
- "am": "Amhara dili (Etiyopya)",
- "hy": "Ermenice (Ermenistan)",
- "as": "Assam dili (Hindistan)",
- "ba": "Başkırtça (Rusya)",
- "eu": "Baskça (Baskça)",
- "be": "Belarusça (Belarus)",
- "br": "Bretonca (Fransa)",
- "bg": "Bulgarca (Bulgaristan)",
- "ca": "Katalanca (Katalanca)",
- "co": "Korsika lehçesi (Fransa)",
- "cs": "Çekçe (Çek Cumhuriyeti)",
- "da": "Danca (Danimarka)",
- "dv": "Divehi (Maldivler)",
- "et": "Estonca (Estonya)",
- "fo": "Faroe dili (Faroe Adaları)",
- "fil": "Filipin dili (Filipinler)",
- "fi": "Fince (Finlandiya)",
- "gl": "Galiçya dili (Galiçya)",
- "ka": "Gürcüce (Gürcistan)",
- "el": "Yunanca (Yunanistan)",
- "gu": "Gucerat dili (Hindistan)",
- "ha": "Hausa dili (Latin, Nijerya)",
- "he": "İbranice (İsrail)",
- "hi": "Hintçe (Hindistan)",
- "hu": "Macarca (Macaristan)",
- "is": "İzlandaca (İzlanda)",
- "ig": "İgbo dili (Nijerya)",
- "id": "Endonezce (Endonezya)",
- "ga": "İrlandaca (Irlanda)",
- "xh": "Zosa dili (Güney Afrika)",
- "zu": "Zuluca (Güney Afrika)",
- "ja": "Japonca (Japonya)",
- "kn": "Kannada dili (Hindistan)",
- "kk": "Kazakça (Kazakistan)",
- "km": "Khmer (Kamboçya)",
- "rw": "Kinyarvanda dili (Ruanda)",
- "sw": "Svahili dili (Kenya)",
- "kok": "Konkani Dili (Hindistan)",
- "ko": "Korece (Güney Kore)",
- "ky": "Kırgızca (Kırgızistan)",
- "lo": "Lao dili (Lao ÖİB)",
- "lv": "Letonca (Letonya)",
- "lt": "Litvanca (Litvanya)",
- "lb": "Lüksemburg dili (Lüksemburg)",
- "mk": "Makedonca (Kuzey Makedonya)",
- "ml": "Malayalam dili (Hindistan)",
- "mt": "Malta dili (Malta)",
- "mi": "Maori dili (Yeni Zelanda)",
- "mr": "Marathi (Hindistan)",
- "moh": "Mohavk dili (Mohavk)",
- "ne": "Nepal dili (Nepal)",
- "oc": "Oksitan dili (Fransa)",
- "or": "Odia (Hindistan)",
- "ps": "Peştuca (Afganistan)",
- "fa": "Farsça",
- "pl": "Lehçe (Polonya)",
- "pa": "Pencap dili (Hindistan)",
- "ro": "Rumence (Romanya)",
- "rm": "Romanş dili (İsviçre)",
- "ru": "Rusça (Rusya)",
- "sa": "Sanskritçe (Hindistan)",
- "st": "Kuzey Sotho Dili (Güney Afrika)",
- "tn": "Setsvana dili (Güney Afrika)",
- "si": "Sinhali dili (Sri Lanka)",
- "sk": "Slovakça (Slovakya)",
- "sl": "Slovence (Slovenya)",
- "sv": "İsveççe (İsveç)",
- "syr": "Süryanice (Suriye)",
- "tg": "Tacikçe (Kiril, Tacikistan)",
- "ta": "Tamil dili (Hindistan)",
- "tt": "Tatarca (Rusça)",
- "te": "Telugu dili (Hindistan)",
- "th": "Tayca (Tayland)",
- "bo": "Tibetçe (ÇHC)",
- "tr": "Türkçe (Türkiye)",
- "tk": "Türkmence (Türkmenistan)",
- "uk": "Ukraynaca (Ukrayna)",
- "ur": "Urduca (Pakistan İslam Cumhuriyeti)",
- "vi": "Vietnamca (Vietnam)",
- "cy": "Galce (Birleşik Krallık)",
- "wo": "Volof dili (Senegal)",
- "ii": "Yi dili (ÇHC)",
- "yo": "Yorubaca (Nijerya)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Uç Nokta için Microsoft Defender",
- "androidDeviceOwnerApplications": "Uygulamalar",
- "androidDeviceOwnerPolicyMessages": "Özel destek bilgileri",
- "androidForWorkPassword": "Cihaz parolası",
- "appManagement": "Uygulamalara İzin Ver veya Engelle",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Kısıtlı Uygulamalar",
- "applicationVisibility": "Uygulamaları Göster veya Gizle",
- "applications": "Uygulama Mağazası",
- "applicationsAndGames": "Uygulama Mağazası, Belge Görüntüleme, Oyunlar",
- "applicationsAndGoogle": "Google Play Mağazası",
- "appsAndExperience": "Uygulamalar ve deneyim",
- "associatedDomains": "İlişkili etki alanları",
- "autonomousSingleAppMode": "Otonom Tekli Uygulama Modu",
- "azureOperationalInsights": "Azure operasyonel içgörüler",
- "bitLocker": "Windows Şifrelemesi",
- "bootOptions": "Önyükleme seçenekleri",
- "browser": "Tarayıcı",
- "builtinApps": "Yerleşik uygulamalar",
- "cameras": "Kameralar",
- "cellular": "Hücresel",
- "cloudAndStorage": "Bulut ve Depolama",
- "cloudPrint": "Bulut Yazıcı",
- "complianceEmailProfile": "E-posta",
- "connectedDevices": "Bağlı cihazlar",
- "connectivity": "Şebeke ve bağlantı",
- "contentCaching": "İçeriği önbelleğe alma",
- "controlPanelAndSettings": "Denetim Masası ve Ayarlar",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Özel Uyumluluk",
- "customConfiguration": "Özel Yapılandırma Profili",
- "customOMASettings": "Özel OMA-URI Ayarları",
- "customPreferences": "Tercih dosyası",
- "dFCISecuritySettings": "Güvenlik ayarları",
- "defender": "Microsoft Defender Virüsten Koruma",
- "defenderAntivirus": "Microsoft Defender Virüsten Koruma",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows Güvenlik Duvarı",
- "defenderLocalSecurityOptions": "Yerel cihaz güvenlik seçenekleri",
- "defenderSecurityCenter": "Microsoft Defender Güvenlik Merkezi",
- "deliveryOptimization": "Teslim İyileştirme",
- "derivedCredentialAuthenticationConfiguration": "Türetilmiş kimlik bilgisi",
- "deviceExperience": "Cihaz deneyimi",
- "deviceFirmwareConfigurationInterface": "Cihaz Üretici Yazılımı Yapılandırma Arabirimi",
- "deviceGuard": "Microsoft Defender Uygulama Denetimi",
- "deviceHealth": "Cihaz Durumu",
- "devicePassword": "Cihaz parolası",
- "deviceProperties": "Cihaz Özellikleri",
- "deviceRestrictions": "Genel",
- "deviceSecurity": "Sistem güvenliği",
- "display": "Görüntü",
- "domainJoin": "Etki Alanına Katılma",
- "domains": "Etki Alanları",
- "edgeBrowser": "Microsoft Edge'in eski sürümü (Sürüm 45 ve altı bir sürüm)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge kiosk modu",
- "editionUpgrade": "Sürüm Yükseltmesi",
- "education": "Eğitim",
- "educationDeviceCerts": "Cihaz sertifikaları",
- "educationStudentCerts": "Öğrenci sertifikaları",
- "educationTakeATest": "Kendinizi Test Edin",
- "educationTeacherCerts": "Öğretmen sertifikaları",
- "emailProfile": "E-posta",
- "enterpriseDataProtection": "Windows Bilgi Koruması",
- "extensibleSingleSignOn": "Çoklu oturum açma uygulama uzantısı",
- "filevault": "FileVault",
- "firewall": "Güvenlik Duvarı",
- "games": "Oyunlar",
- "gatekeeper": "Ağ geçidi denetleyicisi",
- "healthMonitoring": "İşlevsel durumu izleme",
- "homeScreenLayout": "Giriş Ekranı Düzeni",
- "iOSWallpaper": "Duvar Kağıdı",
- "importedPFX": "PKCS İçe Aktarılan Sertifikası",
- "iosDefenderAtp": "Uç Nokta için Microsoft Defender",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Çekirdek uzantıları",
- "keyboardAndDictionary": "Klavye ve sözlük",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Ayrılmış cihazlar",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Kiosk web tarayıcısı",
- "lockScreenMessage": "Kilit Ekranı İletisi",
- "lockedScreenExperience": "Kilit Ekranı Deneyimi",
- "logging": "Raporlama ve Telemetri",
- "loginItems": "Oturum açma öğeleri",
- "loginWindow": "Oturum açma penceresi",
- "macDefenderAtp": "Uç Nokta için Microsoft Defender",
- "maintenance": "Bakım",
- "malware": "Kötü Amaçlı Yazılım",
- "messaging": "Mesajlaşma",
- "microphonesAndSpeakers": "Mikrofonlar ve hoparlörler",
- "networkBoundary": "Ağ sınırı",
- "networkProxy": "Ağ proxy'si",
- "notifications": "Uygulama Bildirimleri",
- "pKCS": "PKCS Sertifikası",
- "password": "Parola",
- "personalProfile": "Kişisel profil",
- "personalization": "Kişiselleştirme",
- "policyOverride": "Grup İlkesini Geçersiz Kılma",
- "ports": "Bağlantı noktaları",
- "powerSettings": "Güç Ayarları",
- "printer": "Yazıcı",
- "privacy": "Gizlilik",
- "privacyPerApp": "Uygulama başına gizlilik özel durumları",
- "privacyPreferences": "Gizlilik tercihleri",
- "projection": "İzdüşüm",
- "radios": "Radyolar",
- "sCCMCompliance": "Configuration Manager Uyumluluğu",
- "sCEP": "SCEP Sertifikası",
- "sCEPProperties": "SCEP Sertifikası",
- "sMode": "Mod anahtarı (yalnızca Windows Insider)",
- "safari": "Safari",
- "search": "Ara",
- "session": "Oturum",
- "sharedDevice": "Paylaşılan iPad",
- "sharedPCAccountManager": "Paylaşılan çok kullanıcılı cihaz",
- "singleSignOn": "Çoklu oturum açma",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Ayarlar",
- "start": "Başlat",
- "systemExtensions": "Sistem uzantıları",
- "systemSecurity": "Sistem Güvenliği",
- "trustedCert": "Güvenilen Sertifika",
- "uEFIAccess": "UEFI erişimi",
- "updates": "Güncelleştirmeler",
- "userRights": "Kullanıcı Hakları",
- "usersAndAccounts": "Kullanıcılar ve Hesaplar",
- "vPN": "Temel VPN",
- "vPNApps": "Otomatik VPN",
- "vPNAppsAndTrafficRules": "Uygulamalar ve Trafik Kuralları",
- "vPNConditionalAccess": "Koşullu Erişim",
- "vPNConnectivity": "Bağlantı",
- "vPNDNSTriggers": "DNS Ayarları",
- "vPNIKEv2": "IKEv2 ayarları",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Bölünmüş Tünel",
- "vPNTrustedNetwork": "Güvenilen Ağ Algılama",
- "wakeSettings": "Uyandırma ayarları",
- "webContentFilter": "Web İçeriği Filtresi",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Uç Nokta için Microsoft Defender",
- "windowsDefenderATP": "Uç Nokta için Microsoft Defender",
- "windowsHelloForBusiness": "İş için Windows Hello",
- "windowsSpotlight": "Windows Spot",
- "wiredNetwork": "Kablolu ağ",
- "wireless": "Kablosuz",
- "wirelessProjection": "Kablosuz projeksiyon",
- "workProfile": "İş profili ayarları",
- "workProfilePassword": "İş profili parolası",
- "xboxServices": "Xbox hizmetleri",
- "zebraMx": "MX profili (yalnızca Zebra)",
- "complianceActionsLabel": "Uyumsuzluk eylemleri"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Açıklama"
- },
- "FeatureDeploymentSettings": {
- "header": "Özellik dağıtımı ayarları"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "Bu özellik bir cihazın sürümünü düşüremez.",
- "label": "Dağıtılacak özellik güncelleştirmesi"
- },
- "GradualRolloutEndDate": {
- "label": "Son grup kullanılabilirliği"
- },
- "GradualRolloutInterval": {
- "label": "Gruplar arasındaki gün sayısı"
- },
- "GradualRolloutStartDate": {
- "label": "İlk grup kullanılabilirliği"
- },
- "Name": {
- "label": "Ad"
- },
- "OptionalUpdate": {
- "label": "Gerekli veya isteğe bağlı güncelleştirme"
- },
- "RolloutOptions": {
- "label": "Piyasaya çıkma seçenekleri"
- },
- "RolloutSettings": {
- "header": "Güncelleştirmeyi Windows Update’te ne zaman kullanıma sunmak istersiniz?"
- },
- "ScopeSettings": {
- "header": "Bu ilke için kapsam etiketlerini yapılandırın."
- },
- "StartDateOnlyStartDate": {
- "label": "İlk kullanıma sunma tarihi"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Devre dışı",
- "enabled": "Etkin",
- "infoBalloonContent": "En son Windows 10 özellik güncelleştirmesinin Windows 11 için uygun olmayan cihazlara yüklenip yüklenemeyeceğini denetleyin",
- "label": "Bir cihaz Windows 11'i çalıştırmaya uygun değilse en son Windows 10 özellik güncelleştirmesini çalıştırın",
- "notApplicable": "Uygulanamaz",
- "summaryLabel": "Windows 11 çalıştırmaya uygun olmayan cihazlara Windows 10 yükleyin"
- },
- "bladeTitle": "Özellik güncelleştirmesi dağıtımları",
- "deploymentSettingsTitle": "Dağıtım ayarları",
- "loadError": "Profil yükleme başarısız oldu!",
- "windows11EULA": "Dağıtılacak Özellik güncelleştirmesini seçerek, bu işletim sistemini bir cihaza uygularken (1) geçerli Windows lisansının toplu lisanslama yoluyla satın alındığını veya (2) kuruluşunuzu bağlama yetkisine sahip olduğunuzu ve burada bulabileceğiniz ilgili Microsoft Yazılımı Lisans Koşulları’nı kuruluş adına kabul ettiğinizi onaylamış oluyorsunuz: {0}."
- },
- "Notifications": {
- "deploymentSaved": "\"{0}\" kaydedildi.",
- "newFeatureUpdateDeploymentCreated": "Yeni özellik güncelleştirme dağıtımı oluşturuldu."
- },
- "TabName": {
- "deploymentSettings": "Dağıtım ayarları",
- "groupAssignmentSettings": "Atamalar",
- "scopeSettings": "Kapsam etiketleri"
- },
- "gradualRolloutLicenseWarning": "Bu yetenek belirli lisanslar gerektirir.",
- "gradualRolloutLicenseWarningEdit": "İlke bu özellik seçilmeden kaydedilene kadar bu özellik kullanılmaya ve yapılandırılmaya devam eder.",
- "licenseLearnMoreText": "Önkoşullar ve özellik güncelleştirmesi ilkeleri hakkında daha fazla bilgi edinin.",
- "optionalUpdateWarning": "İsteğe bağlı seçeneği yalnızca Windows 11 güncelleştirmeleri için kullanılabilir",
- "profileNameWarning": "Ad 64 karakterden kısa olmalıdır",
- "specificLicensingRequired": "Seçilen bazı özellikler belirli lisans gerektirir."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "PIN'de küçük harf kullanımına izin ver",
- "notAllow": "PIN'de küçük harf kullanımına izin verme",
- "requireAtLeastOne": "PIN'de en az bir küçük harf kullanılmasını gerektir"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "PIN'de özel karakter kullanımına izin ver",
- "notAllow": "PIN'de özel karakter kullanımına izin verme",
- "requireAtLeastOne": "PIN'de en az bir özel karakter kullanılmasını gerektir"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "PIN'de büyük harf kullanımına izin ver",
- "notAllow": "PIN'de büyük harf kullanımına izin verme",
- "requireAtLeastOne": "PIN'de en az bir büyük harf kullanılmasını gerektir"
- }
+ "InstallContextType": {
+ "device": "Cihaz",
+ "deviceContext": "Cihaz bağlamı",
+ "user": "Kullanıcı",
+ "userContext": "Kullanıcı bağlamı"
},
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "Uygulama Sürümü",
- "dependencyName": "Bağımlılık adı",
- "lastModifiedTime": "Son değiştirme zamanı",
- "relationship": "İlişki",
- "replaced": "Değiştirildi",
- "searchPlaceholder": "Uygulama adına göre filtreleyin",
- "status": "Durum ayrıntıları",
- "statusDetails": "Durum",
- "supersedenceName": "Yerine geçme adı"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Alt bağımlılık",
- "indirectSupersedence": "Doğrudan ilgili değil",
- "supersedenceAncestors": "Yenisiyle değiştiriliyor",
- "supersedenceDescendants": "Yenisiyle değiştirilmiş"
- },
- "SupersededReplaced": {
- "no": "Hayır",
- "yes": "Evet"
- },
- "Tabs": {
- "chart": "Grafik",
- "dependency": "Bağımlılık",
- "label": "Görünüm: ",
- "supersedence": "Yerine geçme",
- "table": "Tablo"
- },
- "dependencyGraphAriaLabel": "Uygulama bağımlılık grafiği",
- "supersedenceGraphAriaLabel": "Uygulama yerine geçme grafiği"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Lütfen bir bulma betiği seçin",
- "scriptFileLabel": "Bulma betiğinizi seçin"
- },
- "PremiumBanner": {
- "customComplianceToolTip": "Etkinleştirildiğinde, cihazların bir keşif PowerShell komut dosyasından döndürülen özel verilere dayalı olarak bir JSON dosyasında tanımlanan özel kurallara göre uyumlu olması gerekir.",
- "label": "Özel Uyumluluk şu anda önizlemede sunuluyor. Genel kullanıma sunulduktan sonra bunu Microsoft Intune'u içeren lisanslama seçeneklerine ek bir maliyetle ekleyebilirsiniz."
- },
- "ScriptPicker": {
- "objectName": "Betik",
- "placeholder": "Seçmek için tıklayın",
- "searchboxPlaceholder": "Betik adına göre ara",
- "title": "Bir bulma betiği seçin"
- },
- "SummaryGrid": {
- "ariaLabel": "Özel uyumluluk kuralları özeti"
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "Tüm uygunluk ilkeleri için bir engelleme eylemi gereklidir.",
+ "graceperiod": "Zamanlama (uyumsuzluktan sonraki günler)",
+ "graceperiodInfo": "Bu eylemin, kaç günlük uyumsuzluktan sonra kullanıcının cihazına yönelik olarak tetikleneceğini belirtin",
+ "subtitle": "Eylem parametrelerini belirtin",
+ "title": "Eylem parametreleri"
+ },
+ "List": {
+ "gracePeriodDay": "Uyumsuzluktan sonra {0} gün",
+ "gracePeriodDays": "Uyumsuzluktan sonra {0} gün",
+ "gracePeriodHour": "Uyumsuzluktan {0} saat sonra",
+ "gracePeriodHours": "Uyumsuzluktan {0} saat sonra",
+ "gracePeriodMinute": "Uyumsuzluktan {0} dakika sonra",
+ "gracePeriodMinutes": "Uyumsuzluktan {0} dakika sonra",
+ "immediately": "Hemen",
+ "schedule": "Zamanlama",
+ "scheduleInfoBalloon": "Uyumsuzluktan sonra geçecek gün sayısı",
+ "subtitle": "Uyumlu olmayan cihazlardaki eylem dizisini belirtin",
+ "title": "Eylemler"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Diğerleri",
+ "additionalRecipients": "Ek alıcılar (e-posta ile)",
+ "additionalRecipientsBladeTitle": "Ek alıcı seç",
+ "emailAddressPrompt": "E-posta adreslerini girin (virgül ile ayırarak)",
+ "invalidEmail": "Geçersiz e-posta adresi",
+ "messageTemplate": "İleti şablonu",
+ "noneSelected": "Hiçbiri seçilmedi",
+ "notSelected": "Seçili değil",
+ "numSelected": "{0} seçildi",
+ "selected": "Seçili"
},
- "UploadFile": {
- "jsonFileLabel": "JSON dosyasını özel uyumluluk ayarlarınızla karşıya yükleyin ve doğrulayın",
- "noFileSelectedError": "Lütfen bir json dosyası seçin",
- "parseFileSelectedError": "json dosyası geçersiz"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filtre",
- "noFilters": "Yok"
- },
- "Platform": {
- "all": "Tümü",
- "android": "Android cihaz yöneticisi",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android Enterprise",
- "common": "Ortak",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS ve Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Bilinmeyen",
- "unsupported": "Desteklenmiyor",
- "windows": "Windows",
- "windows10": "Windows 10 ve sonraki sürümler",
- "windows10CM": "Windows 10 ve üzeri sürümler (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 ve sonraki sürümler",
- "windows8And10": "Windows 8 ve 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 ve sonraki sürümler",
- "windows10AndWindowsServer": "Windows 10, Windows 11 ve Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 ve üzeri sürümler (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows Kişisel Bilgisayarı"
- },
+ "block": "Cihazı uyumsuz olarak işaretle",
+ "lockDevice": "Cihazı kilitle (yerel eylem)",
+ "lockDeviceWithPasscode": "Cihazı kilitle (yerel eylem)",
+ "noAction": "Eylem yok",
+ "noActionRow": "Eylem yok; bir eylem eklemek için 'Ekle'yi seçin",
+ "pushNotification": "Son kullanıcıya anında iletme bildirimi gönder",
+ "remoteLock": "Uyumsuz cihazı uzaktan kilitle",
+ "removeSourceAccessProfile": "Kaynak erişim profilini kaldır",
+ "retire": "Cihazı kullanımdan kaldırma listesine ekle",
+ "wipe": "Silme",
+ "emailNotification": "Son kullanıcıya e-posta gönder"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Yönetici Grupları",
+ "RoleAssignmentAdminDesc": "Yönetici grubu kullanıcıları, bu role atanmış olan yöneticilerdir",
+ "rolesMenuTitle": "Endpoint Manager rolleri",
+ "RoleAssignmentScopeDesc": "Bu rol atamasındaki yöneticiler ilkeleri, uygulamaları ve uzak görevleri hedefleyebilir",
+ "RoleAssignmentScope": "Kapsam Grupları"
+ },
"AppInformationTab": {
"Info": {
"AppStoreUrl": {
@@ -684,360 +106,90 @@
"name": "Uygulama bilgileri",
"nameForOfficeSuitApp": "Uygulama paketi bilgileri"
},
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "Android'de PIN yerine parmak izi kimliği kullanılmasına izin verebilirsiniz. Kullanıcılardan, iş hesaplarıyla bu uygulamaya erişirken parmak izlerini sağlamaları istenir.",
- "iOS": "iOS/iPadOS cihazlarında, PIN numarası yerine parmak izi tanımlaması kullanımına izin verebilirsiniz. Kullanıcılar iş hesaplarını kullanarak bu uygulamaya eriştiklerinde, parmak izlerini sağlamaları istenir.",
- "mac": "Mac cihazlarda PIN numarası yerine parmak izi kullanımına izin verebilirsiniz. Kullanıcılar iş hesaplarını kullanarak bu uygulamaya eriştiklerinde, parmak izlerini sağlamaları istenir."
- },
- "allowWidgetContentSync": "İlkeyle yönetilen uygulamaların uygulama arabirim öğelerine veri kaydetmesini engellemek için Engelle’yi seçin. İzin ver’i seçerseniz, bu özellikler ilkeyle yönetilen uygulamada destekleniyorsa ve etkin durumdaysa ilkeyle yönetilen uygulama verileri uygulama arabirim öğelerine kaydedebilir. \r\n\r\n \r\n\r\nUygulamalar uygulama yapılandırması ilkeleri aracılığıyla ek yapı yeteneği sunabilir. Daha fazla bilgi için uygulamanın belgelerine bakın.",
- "appSharingFromLevel1": "Bu uygulamanın veri alabileceği uygulamaları belirtmek için aşağıdaki seçeneklerden birini belirtin:",
- "appSharingFromLevel2": "{0}: Kuruluş belgeleri veya hesaplarındaki verilerin yalnızca ilkeyle yönetilen diğer uygulamalardan alınmasına izin ver",
- "appSharingFromLevel3": "{0}: Kuruluş belgeleri veya hesaplarındaki verilerin tüm uygulamalardan alınmasına izin ver",
- "appSharingFromLevel4": "{0}: Kuruluş belgeleri veya hesaplarındaki verilerin tüm uygulamalardan alınmasına izin verme",
- "appSharingFromLevel5": "{0}: Tüm uygulamalardan veri aktarımına izin ver ve bir kullanıcı kimliği olmayan tüm gelen verileri kuruluş verileri olarak değerlendir.",
- "appSharingToLevel1": "Bu uygulamanın veri gönderebileceği uygulamaları belirtmek için aşağıdaki seçeneklerden birini belirtin:",
- "appSharingToLevel2": "{0}: Yalnızca ilkeyle yönetilen diğer uygulamalara kuruluş verileri gönderilmesine izin ver",
- "appSharingToLevel3": "{0}: Tüm uygulamalara kuruluş verileri gönderilmesine izin ver",
- "appSharingToLevel4": "{0}: Hiçbir uygulamaya kuruluş verileri gönderilmesine izin verme",
- "appSharingToLevel5": "{0}: Kayıtlı cihazlarda yalnızca ilke ile yönetilen uygulamalara aktarıma ve diğer MDM ile yönetilen uygulamara dosya aktarımına izin ver",
- "appSharingToLevel6": "{0}: Yalnızca ilke ile yönetilen uygulamalara aktarıma izin ver ve Birlikte Aç/Paylaş iletişim kutularını yalnızca ilke ile yönetilen uygulamaları görüntüleyecek şekilde filtrele",
- "assignmentFilterEdit1": "Bu ilkeye atama filtreleri eklerseniz 'Cihaz Yönetimi Türü' özelliği, 'Uygulamalar' sayfasında 'Tüm cihaz türlerinde uygulamalara hedefle' ve 'Cihaz türleri' için belirtilen değerlere ek olarak uygulanır.",
- "assignmentFilterEdit2": "Uygulama Koruma ilkeleri atama hakkında daha fazla bilgi edinin.",
- "conditionalEncryption1": "Kayıtlı bir cihazda cihaz şifrelemesi algılandığında dahili uygulama depolaması için uygulama şifrelemesini devre dışı bırakmak üzere {0} seçeneğini belirleyin.",
- "conditionalEncryption2": "Not: Intune yalnızca Intune MDM ile cihaz kaydını algılayabilir. Verilere yönetilmeyen uygulamalar tarafından erişilmediğinden emin olmak için harici uygulama depolaması yine de şifrelenir.",
- "contactSyncMac": "Devre dışı bırakılırsa uygulamalar yerel adres defterine kişi kaydedemez.",
- "contactsSync": "İlke tarafından yönetilen uygulamaların verileri cihazın yerel uygulamalarına (Kişiler, Takvim ve pencere öğeleri) kaydetmesini ve ilke tarafından yönetilen uygulamalardaki eklentilerin kullanılmasını önlemek için Engelle seçeneğini belirleyin. İzin ver seçeneğini belirlerseniz, bu özellikler ilke tarafından yönetilen uygulamada destekleniyorsa ve etkinse ilke tarafından yönetilen uygulama, verileri yerel uygulamalara kaydedebilir veya eklentileri kullanabilir.
Uygulamalar, uygulama yapılandırma ilkeleriyle ek yapılandırma özelliği sağlayabilir. Daha fazla bilgi için uygulamanın belgelerine bakın.",
- "deviceTypeTargetingCreate1": "Cihaz türü hedefleme, ilke oluşturmada Atamalar adımına taşındı.",
- "deviceTypeTargetingEdit1": "Bu ilkeye atama filtreleri eklerseniz 'Cihaz Yönetimi Türü' özelliği, 'Uygulamalar' sayfasında 'Tüm cihaz türlerinde uygulamalara hedefle' ve 'Cihaz türleri' için belirtilen değerlere ek olarak uygulanır.",
- "deviceTypeTargetingEdit2": "Cihaz yönetim türü hedeflemesini düzenlemek için 'Tüm cihaz türlerinde uygulamaları hedefle' = 'Evet' seçeneğini sıfırlayın. Daha sonra 'Cihaz Yönetimi Türü' için istenen değerleri içeren bir MAM atama filtresi oluşturun.",
- "deviceTypeTargetingHasMoved": "Uygulama Koruma İlkeleri hakkında daha fazla bilgi edinin",
- "encryptionAndroid1": "Intune mobil uygulama yönetim ilkesiyle ilişkilendirilen uygulamalar için, şifreleme Microsoft tarafından sağlanır. Veriler, mobil uygulama yönetimi ilkesindeki ayara göre dosya G/Ç işlemleri sırasında eş zamanlı olarak şifrelenir. Android üzerindeki yönetilen uygulamalar, platform şifreleme kitaplıklarından yararlanan CBC modunda AES-128 şifrelemesini kullanır. Şifreleme yöntemi FIPS 140-2 uyumlu değildir. SHA-256 şifrelemesi, SigAlg parametresini kullanan açık bir yönerge olarak desteklenir ve yalnızca 4.2 ve üzeri cihazlarda çalışır. Cihaz depolama alanındaki içerikler her zaman şifrelenir.",
- "encryptionAndroid2": "Uygulama ilkenizde şifreleme gerektirdiğinizde, cihazlarına erişmek için son kullanıcıların bir PIN ayarlaması ve kullanması gerekir. Cihaz erişimi için ayarlanmış bir PIN yoksa uygulamalar başlatılmaz ve son kullanıcıya “Şirketiniz, bu uygulamaya erişmek için öncelikle bir cihaz PIN'i etkinleştirmenizi gerektirdi.\" iletisi görüntülenir.",
- "encryptionMac1": "Intune mobil uygulama yönetim ilkesiyle ilişkilendirilen uygulamalar için şifreleme Microsoft tarafından sağlanır. Veriler, mobil uygulama yönetimi ilkesindeki ayara göre dosya G/Ç işlemleri sırasında eş zamanlı olarak şifrelenir. Mac üzerindeki yönetilen uygulamalar, platform şifreleme kitaplıklarından yararlanan CBC modunda AES-128 şifrelemesini kullanır. Şifreleme yöntemi FIPS 140-2 uyumlu değildir. SHA-256 şifrelemesi, SigAlg parametresini kullanan açık bir yönerge olarak desteklenir ve yalnızca 4.2 ve üzeri cihazlarda çalışır. Cihaz depolama alanındaki içerikler her zaman şifrelenir.",
- "faceId1": "Uygun olan yerlerde, PIN yerine yüz tanıma kullanımına izin verebilirsiniz. Kullanıcılar iş hesapları ile bu uygulamaya eriştiklerinde yüz kimliği sağlamaları istenir.",
- "faceId2": "Uygulama erişimi için PIN yerine yüz tanıma kullanmaya izin vermek için Evet seçeneğine tıklayın.",
- "managementLevelsAndroid1": "Bu ilkenin, Android cihaz yöneticisi cihazları, Android Enterprise cihazları veya yönetilmeyen cihazlar için geçerli olup olmayacağını belirtmek üzere bu seçeneği kullanın.",
- "managementLevelsAndroid2": "{0}: Yönetilmeyen cihazlar, Intune MDM yönetiminin algılanmadığı cihazlardır. Bu, 3. taraf MDM satıcılarını içerir.",
- "managementLevelsAndroid3": "{0}: Android Cihaz Yönetimi API'sini kullanan Intune tarafından yönetilen cihazlar.",
- "managementLevelsAndroid4": "{0}: Android Enterprise İş Profilleri veya Android Enterprise Tam Cihaz Yönetimi kullanan, Intune tarafından yönetilen cihazlar.",
- "managementLevelsIos1": "Bu ilkenin MDM yönetilen cihazlar veya yönetilmeyen cihazlara uygulanıp uygulanmayacağını belirtmek için bu seçeneği kullanın.",
- "managementLevelsIos2": "{0}: Yönetilmeyen cihazlar, Intune MDM yönetiminin algılanmadığı cihazlardır. Bu, 3. taraf MDM satıcılarını içerir.",
- "managementLevelsIos3": "{0}: Yönetilen cihazlar, Intune MDM tarafından yönetilir.",
- "minAppVersion": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması gereken en düşük Uygulama sürümünü belirtin.",
- "minAppVersionWarning": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması önerilen en düşük Uygulama sürümünü belirtin.",
- "minOsVersion": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması gereken en düşük işletim sistemi sürümünü belirtin.",
- "minOsVersionWarning": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması önerilen en düşük işletim sistemi sürümünü belirtin.",
- "minPatchVersion": "Kullanıcının uygulamaya güvenli erişmek için sahip olabileceği en eski gerekli Android güvenlik düzeltme eki düzeyini tanımlayın.",
- "minPatchVersionWarning": "Kullanıcının uygulamaya güvenli erişmek için sahip olabileceği en eski önerilen Android güvenlik düzeltme eki düzeyini tanımlayın.",
- "minSdkVersion": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması gereken en düşük Intune Uygulama Koruma İlkesi SKD'sı sürümünü belirtin.",
- "requireAppPinDefault": "
Kayıtlı bir cihazda cihaz kilidi algılandığında uygulama PIN'ini devre dışı bırakmak için Evet'i seçin.
",
- "targetAllApps1": "İlkenizi herhangi bir yönetim durumunda olan cihazlardaki uygulamalara hedeflemek için bu seçeneği kullanın.",
- "targetAllApps2": "Kullanıcının ilkesi belirli bir yönetim durumu için hedeflendiyse ilke çatışması çözümleme sırasında bu ayarın yerine geçilir.",
- "touchId2": "Uygulama erişiminde PIN numarası yerine parmak izi kimliğini zorunlu kılmak için {0} seçeneğini belirtin."
- },
- "Tap": {
- "pinResetAfterNumberOfDays": "PIN numarasının kullanıcı tarafından sıfırlanması gerekmeden önce geçmesi gereken gün sayısını belirtin.",
- "previousPinBlockCount": "Bu ayar, Intune'un koruyacağı önceki PIN'lerin sayısını belirtir. Tüm yeni PIN'ler, Intune'un koruduğu PIN'lerden farklı olmalıdır."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "Bu Windows Search'ün şifrelenmiş verileri aramaya devam etmesine izin verir.",
- "authoritativeIpRanges": "Windows'un IP aralıklarını otomatik algılamasını geçersiz kılmak istiyorsanız bu ayarı etkinleştirin.",
- "authoritativeProxyServers": "Windows'un ara sunucuları otomatik algılamasını geçersiz kılmak istiyorsanız bu ayarı etkinleştirin.",
- "checkInput": "Girişin geçerliliğini denetleyin",
- "dataRecoveryCert": "Kurtarma sertifikası, şifreleme anahtarınız kaybolduğunda veya zarar gördüğünde şifreli dosyaları kurtarmak için kullanabileceğiniz özel bir Şifreleme Dosya Sistemi (EFS) sertifikasıdır. Kurtarma sertifikasını burada oluşturup belirtmeniz gerekir. Daha fazla bilgiyi burada bulabilirsiniz",
- "enterpriseCloudResources": "
Kurumsal olarak değerlendirilecek ve Windows Bilgi Koruması ilkesiyle korunacak bulut kaynaklarını belirtin. Girişler '|' karakteriyle ayrılarak birden çok kaynak belirtilebilir.
Şirketinizde yapılandırılmış bir proxy varsa, belirttiğiniz bulut kaynaklarına giden trafiğin hangi proxy üzerinden yönlendirileceğini belirtebilirsiniz.
Kurumsal ağınızı oluşturan IPv4 aralıklarını belirtin. Bunlar, kurumsal ağ sınırınızı tanımlamak için belirttiğiniz Kurumsal Ağ Etki Alanı Adları ile birlikte kullanılır.
Bu ayar, Windows Bilgi Koruması'nı etkinleştirmek için gereklidir.
Girişler virgülle ayrılarak birden çok aralık belirtilebilir.
Kurumsal ağınızı oluşturan IPv6 aralıklarını belirtin. Bunlar, kurumsal ağ sınırınızı tanımlamak için belirttiğiniz Kurumsal Ağ Etki Alanı Adları ile birlikte kullanılır.
Girişler virgülle ayrılarak birden çok aralık belirtilebilir.
Şirketinizde yapılandırılmış bir proxy varsa, Kurumsal Bulut Kaynakları ayarlarında belirtilen bulut kaynaklarına giden trafiğin hangi proxy üzerinden yönlendirileceğini belirtebilirsiniz.
Girişler noktalı virgülle ayrılarak birden fazla değer belirtilebilir.
Kurumsal ağınızı oluşturan DNS adlarını belirtin. Bunlar, kurumsal ağ sınırınızı tanımlamak için belirttiğiniz IP aralıklarıyla birlikte kullanılır. Girişler virgülle ayrılarak birden çok değer belirtilebilir.
Bu ayar, Windows Bilgi Koruması'nı etkinleştirmek için gereklidir.
Örneğin: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Şirket ağınızı oluşturan DNS adlarını belirtin. Bunlar, şirket ağı sınırlarınızı tanımlamak üzere belirttiğiniz IP aralıklarıyla birlikte kullanılır. Tek tek girişleri bir '|' ile ayırarak birden fazla değer belirtebilirsiniz.
Windows Bilgi Koruması'nı etkinleştirmek için bu ayar gereklidir.
Örneğin: sirket.contoso.com|bolge.contoso.com
",
- "enterpriseProxyServers": "
Kurumsal ağınızda dışarı yönelik proxy'ler varsa, bunları burada belirtin. Proxy sunucusu adresi belirtirken, trafik akışı için izin verilecek ve Windows Bilgi Koruması ile korunacak bağlantı noktasını da belirtmeniz gerekir.
Not: Bu liste, Kurumsal İç Proxy Sunucu listenizdeki sunucuları içermemelidir. Girişler noktalı virgülle ayrılarak birden çok değer belirtilebilir.
",
- "maxInactivityTime1": "Cihazın PIN'inin veya parolasının kilitlenmesine neden olan izin verilen en uzun boşta kalma süresini (dakika cinsinden) belirtir. Kullanıcılar Ayarlar uygulamasında belirtilen en uzun süreden daha kısa herhangi bir mevcut zaman aşımı değerini seçebilir. Bu ilke ile ayarlanana değer ne olursa olsun, Lumia 950 ve 950XL'nin en fazla 5 dakika zaman aşımı değeri olduğuna dikkat edin.",
- "maxInactivityTime2": "0 (varsayılan) - Bir zaman aşımı değeri tanımlanmaz. '0' varsayılan değeri 'Zaman aşımı tanımlanmadı' olarak yorumlanır.",
- "maxPasswordAttempts1": "Bu ilkenin, mobil cihazda ve masaüstünde farklı davranışları vardır.",
- "maxPasswordAttempts2": "Mobil cihazda, kullanıcı bu ilke ile ayarlanan değere ulaştığında cihaz silinir.",
- "maxPasswordAttempts3": "Masaüstünde, kullanıcı bu ilke ile ayarlanan değere ulaştığında bilgisayar silinmez. Onun yerine, masaüstü BitLocker kurtarma moduna geçirilerek veriler erişilemez ancak kurtarılabilir yapılır. BitLocker etkileştirilmemişse ilke zorlanamaz.",
- "maxPasswordAttempts4": "Başarısız deneme sınırına ulaşmadan önce, kullanıcı kilit ekranına gönderilir ve daha fazla başarısız denemenin bilgisayarı kilitleyeceği konusunda uyarılır. Kullanıcı sınıra ulaştığında cihaz otomatik olarak yeniden başlatılır ve BitLocker kurtarma sayfasını gösterir. Bu sayfa, kullanıcıya BitLocker kurtarma anahtarını sorar.",
- "maxPasswordAttempts5": "0 (varsayılan) - Hatalı PIN veya parola girildikten sonra cihaz asla silinmez.",
- "maxPasswordAttempts6": "Tüm ilke değerleri = 0 ise en güvenli değer 0'dır; aksi takdirde, En düşük ilke değeri en güvenli değerdir.",
- "mdmDiscoveryUrl": "MDM'ye kaydolan kullanıcıların kullanacağı MDM kayıt uç noktasının URL'sini belirtin. Varsayılan ayar olarak, bu Intune için belirtilmiştir.",
- "minimumPinLength1": "PIN için gerekli en az sayıda karakteri ayarlayan tamsayı değeri. Varsayılan değer 4'tür. Bu ilke ayarı için yapılandırabileceğiniz en küçük sayı 4'tür. Yapılandırabileceğiniz en büyük sayı, Maksimum PIN uzunluğu ilke ayarında yapılandırılan sayıdan veya 127 sayısından hangisi küçükse ondan küçük olmalıdır.",
- "minimumPinLength2": "Bu ilke ayarını yapılandırırsanız PIN uzunluğu bu sayıdan büyük veya bu sayıya eşit olmalıdır. Bu ilke ayarını devre dışı bırakır veya yapılandırmazsanız PIN uzunluğu 4'e eşit veya daha büyük olmalıdır.",
- "name": "Bu ağ sınırının adı",
- "neutralResources": "
Şirketinizde kimlik doğrulama için yeniden yönlendirme uç noktaları varsa, bunları burada belirtin. Burada belirtilen konumlar, bağlantının yeniden yönlendirmeden önceki bağlamına bağlı olarak, kişisel ya da kurumsal olarak değerlendirilir.
Girişler virgülle ayrılarak birden çok değer belirtilebilir.
Örneğin: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Windows'ta oturum açma yöntemi olarak İş İçin Windows Hello'yu ayarlayan değer",
- "passportForWork2": "Varsayılan değer true'dur. Bu ilkeyi false olarak ayarlarsanız kullanıcı, sağlamanın gerekli olduğu Microsoft Entra'ya katılan cep telefonları dışında İş İçin Windows Hello'yu hiçbir yerde sağlayamaz.",
- "pinExpiration": "Bu ilke ayarı için yapılandırabileceğiniz en büyük sayı 730'dur. Bu ilke ayarı için yapılandırabileceğiniz en küçük sayı 0'dır. Bu ilke 0 olarak ayarlanırsa kullanıcının PIN'inin süresi asla sona ermez.",
- "pinHistory1": "Bu ilke ayarı için yapılandırabileceğiniz en büyük sayı 50'dir. Bu ilke ayarı için yapılandırabileceğiniz en küçük sayı 0'dır. Bu ilke 0 olarak ayarlanırsa önceki PIN'lerin depolanması gerekmez.",
- "pinHistory2": "Kullanıcının geçerli PIN'i kullanıcı hesabıyla ilişkilendirilmiş PIN'ler kümesine eklenir. PIN geçmişi PIN sıfırlama yoluyla korunmaz.",
- "protectUnderLock": "Cihaz kilitli durumdayken uygulama içeriği korunur.",
- "protectionModeBlock": "
Kapalı: Kullanıcı verileri korunan uygulamaların dışında yeniden konumlandırmakta özgürdür. Hiçbir eylem kaydedilmez.
",
- "protectionModeOverride": "
Geçersiz kılmalara izin ver: Kullanıcı verileri korunan uygulamadan korunmayan uygulamaya yeniden konumlandırmayı denediğinde bu durum sorulur. Bu istemi geçersiz kılmayı seçerse eylem kaydedilir.
",
- "protectionModeSilent": "
Sessiz: Kullanıcı verileri korunan uygulamaların dışında yeniden konumlandırmakta özgürdür. Bu eylemler kaydedilir.
",
- "required": "Gerekli",
- "revokeOnMdmHandoff": "Windows 10, sürüm 1703'te eklenmiştir. Bu ilke, bir cihaz MAM'den MDM'ye yükseltildiğinde WIP anahtarlarının iptal edilip edilmeyeceğini denetler. \\\"Kapalı\\\" olarak ayarlanırsa, anahtarlar iptal edilmez ve kullanıcı yükseltmeden sonra korumalı dosyalara erişmeye devam eder. MDM hizmeti MAM hizmeti ile aynı WIP EnterpriseID kullanılarak yapılandırıldıysa bu önerilir.",
- "revokeOnUnenroll": "Bir cihazın bu ilkeden kaydı kaldırıldığında şifreleme anahtarlarının iptal edilmesine neden olur.",
- "rmsTemplateForEdp": "RMS şifrelemesi için kullanılacak TemplateID GUID'si. Azure RMS şablonu, BT yöneticisinin RMS korumalı dosyaya kimlerin ne kadar süreyle erişebileceği ile ilgili ayrıntıları yapılandırmasını sağlar.",
- "showWipIcon": "Üzerine bir simge koyarak kurumsal bağlamda işlem yapan kullanıcının bunu bilmesini sağlar.",
- "useRmsForWip": "WIP için Azure RMS şifrelemesine izin verilip verilmeyeceğini belirtir."
- },
- "requireAppPin": "
Kayıtlı bir cihazda cihaz kilidi algılandığında uygulama PIN'ini devre dışı bırakmak için Evet'i seçin.
Not: Intune, iOS/iPadOS'ta üçüncü taraf EMM çözümü ile yapılan cihaz kaydını algılayamaz.
"
- },
- "Win32Program": {
- "DeviceRestartBehaviorOptions": {
- "allow": "Uygulama yüklemesi, cihazın yeniden başlatılmasını zorlayabilir",
- "basedOnReturnCode": "Dönüş kodlarına dayalı davranışı belirle",
- "force": "Intune zorunlu bir cihaz yeniden başlatma işlemi gerçekleştirecek",
- "suppress": "Belirli bir eylem yok"
- },
- "InstallExperience": {
- "maxRunTimeInMinutes": "Gerekli yükleme süresi (dakika)",
- "maxRunTimeInMinutesToolTip": "Sistemin, programın yükleme işlemini tamamlamasını beklemesi için gereken dakika sayısı. Varsayılan değer 60 dakikadır."
- },
- "RunAsAccountOptions": {
- "system": "Sistem",
- "user": "Kullanıcı"
- },
- "availableUninstall": "Kullanılabilir kaldırmaya izin ver",
- "availableUninstallTooltip": "Şirket Portalı’ından kullanıcılar için bu uygulamada kaldırma seçeneği sağlamak için 'Evet' seçeneğini işaretleyin. Kullanıcıların uygulamayı Şirket Portalı’ndan kaldırmasını engellemek için 'Hayır'ı seçin.",
- "bladeTitle": "Program",
- "deviceRestartBehavior": "Cihaz yeniden başlatma davranışı",
- "deviceRestartBehaviorTooltip": "Uygulama başarıyla yüklendikten sonra cihaz yeniden başlatma davranışını seçin. Cihazı dönüş kodları yapılandırma ayarlarına bağlı olarak yeniden başlatmak için 'Davranışı dönüş kodlarına göre belirle' seçeneğini belirleyin. MSI tabanlı uygulamaların yüklenmesi sırasında cihaz yeniden başlatma işlemlerini ertelemek için 'Belirli bir eylem yok' seçeneğini belirleyin. Uygulama yüklemesinin yeniden başlatmayı ertelemeden tamamlanmasına izin vermek için 'Uygulama yüklemesi cihazın yeniden başlatılmasını zorlayabilir' seçeneğini belirleyin. Her başarılı uygulama yüklemesinden sonra cihazı yeniden başlatmak için 'Intune zorunlu bir cihaz yeniden başlatma zorlayacak' seçeneğini belirleyin.",
- "header": "Bu uygulamayı yükleme ve kaldırma komutlarını belirtin:",
- "installCommand": "Yükleme komutu",
- "installCommandMaxLengthErrorMessage": "Yükleme komutu, izin verilen maksimum uzunluk olan 1024 karakteri aşamaz.",
- "installCommandTooltip": "Bu uygulamayı yüklemek için kullanılan yükleme komut satırının tamamı.",
- "runAs32Bit": "Yükleme ve kaldırma komutlarını 64 bit istemcilerde 32 bit işlemde çalıştır",
- "runAs32BitTooltip": "Uygulamayı 64 bit istemcilerde 32 bit bir işlemde yüklemek ve kaldırmak için 'Evet' seçeneğini belirleyin. Uygulamayı 64 bit istemcilerde 64 bit bir işlemde yüklemek ve kaldırmak için 'Hayır' (varsayılan) seçeneğini belirleyin. 32 bit istemciler, her zaman 32 bit işlemi kullanır.",
- "runAsAccount": "Yükleme davranışı",
- "runAsAccountTooltip": "Destekleniyorsa, bu uygulamayı tüm kullanıcılara yüklemek için 'Sistem'i seçin. Uygulamayı cihazda oturum açmış kullanıcıya yüklemek için 'Kullanıcı'yı seçin. Çift amaçlı MSI uygulamalarında değişiklikler, uygulamanın asıl yüklemesinde uygulanan değer geri yüklenene kadar güncelleştirmelerin ve kaldırmaların tamamlanmasını önler.",
- "selectorLabel": "Program",
- "uninstallCommand": "Kaldırma komutu",
- "uninstallCommandTooltip": "Bu uygulamayı kaldırmak için kullanılan kaldırma komut satırının tamamı."
- },
- "Autopilot": {
- "AssignResourceAccount": {
- "createNewCommandMenu": "Yeni oluştur",
- "createNewResourceAccountInfo": "
\r\nKayıt sırasında yeni bir kaynak hesabı oluşturun. Kaynak hesabı, Kaynak hesabı tablosuna hemen eklenir, ancak cihaz kaydedilinceye ve Surface Hub aboneliği doğrulanıncaya kadar etkin olmaz. Kaynak Hesapları hakkında daha fazla bilgi edinin
\r\n ",
- "createNewResourceTitle": "Yeni kaynak hesabı oluştur",
- "deviceNameInvalid": "Cihaz adı geçersiz bir biçimde",
- "deviceNameRequired": "Cihaz adı gerekiyor",
- "editResourceAccountLabel": "Düzenle",
- "selectExistingCommandMenu": "Mevcut olanı seç"
- },
- "Device": {
- "ComputerName": {
- "validFormat": "Adlar 15 karakter veya daha kısa olmalıdır ve harf (a-z, A-Z), sayı (0-9) ve kısa çizgi içerebilir. Adlar yalnızca sayı içeremez. Adlar boşluk içeremez."
- },
- "Header": {
- "addressableUserName": "Kullanımı kolay ad",
- "azureADDevice": "İlişkili Microsoft Entra cihazı",
- "batch": "Grup etiketi",
- "dateAssigned": "Atama tarihi",
- "deviceAccountPwd": "Cihaz hesabı şifresi",
- "deviceAccountUpn": "Cihaz hesabı",
- "deviceDisplayName": "Cihaz adı",
- "deviceFriendlyName": "Cihaz kolay adı",
- "deviceName": "Cihaz adı",
- "deviceUseType": "Cihaz kullanım türü",
- "enrollmentState": "Kayıt durumu",
- "intuneDevice": "İlişkili Intune cihazı",
- "lastContacted": "Son iletişim",
- "make": "Üretici",
- "model": "Model",
- "profile": "Atanan profil",
- "profileStatus": "Profil durumu",
- "purchaseOrderId": "Satın alma siparişi",
- "resourceAccount": "Kaynak hesabı",
- "serialNumber": "Seri numarası",
- "userPrincipalName": "Kullanıcı"
- },
- "SurfaceHub": {
- "friendlyNameRequired": "Kolay bir ad gereklidir",
- "pwdRequired": "Parola gereklidir",
- "pwdValidFormat": "Parola güncelleştirilemiyor. Yeni parola için sağlanan değer etki alanının uzunluk veya karmaşıklık gereksinimlerini karşılamıyor.",
- "upnRequired": "Bir cihaz hesabı gerekiyor.",
- "upnValidFormat": "Değerler harfler (a-z, A-Z), sayılar (0-9) ve kısa çizgiler içerebilir. Değerler boşluk içeremez."
- }
- },
- "DeviceUseType": {
- "meetingAndPresentation": "Toplantı ve sunum",
- "teamCollaboration": "Ekip işbirliği"
- },
- "Devices": {
- "featureDescription": "Windows Autopilot, kullanıcılarınız için ilk kez çalıştırma deneyimini (OOBE) özelleştirmenize olanak tanır.",
- "importErrorStatus": "Bazı cihazlar içeri aktarılamadı. Daha fazla bilgi için buraya tıklayın.",
- "importPendingStatus": "İçeri aktarma sürüyor. Geçen süre: {0} dk. Bu işlem {1} dakikaya kadar sürebilir."
- },
- "DirectoryService": {
- "activeDirectoryAD": "Microsoft Entra hibrite katılmış",
- "activeDirectoryADLabel": "Autopilot ile Microsoft Entra hibrit katılımı",
- "azureAD": "Microsoft Entra’ya katılmış",
- "unknownType": "Bilinmeyen Tür"
- },
- "Filter": {
- "enrollmentState": "Durum",
- "profile": "Profil durumu"
- },
- "OOBE": {
- "AddressableUserName": {
- "validateEmpty": "Kullanıcı kolay adı boş olamaz."
- },
- "ApplyComputerNameTemplate": {
- "infoBalloon": "Kayıt sırasında cihazlarınıza ad eklemek için bir adlandırma şablonu oluşturun.",
- "label": "Cihaz adı şablonu uygula"
- },
- "ApplyComputerNameTemplateDisabled": {
- "label": "Microsoft Entra ile katılan türdeki Autopilot dağıtım profillerinde cihazlar, Etki Alanı Katılımı yapılandırmasında belirtilen ayarlar kullanılarak yapılandırılır."
- },
- "ComputerNameTemplate": {
- "emptyValue": "MyCompany-%RAND:4%",
- "label": "Bir ad girin",
- "noDisallowedChars": "Ad yalnızca alfasayısal karakterler, kısa çizgi, %SERIAL% veya %RAND:x içermelidir",
- "serialLength": "%SERIAL% ile 7'den fazla karakter kullanılamaz",
- "validateLessThan15Chars": "Ad, 15 karakter veya daha kısa olmalıdır",
- "validateNoSpaces": "Bilgisayar adları boşluk içeremez",
- "validateNotAllNumbers": "Ad ayrıca harf ve/veya kısa çizgi içermelidir",
- "validateNotEmpty": "Ad boş olamaz",
- "validateOnlyOneMacro": "Ad, %SERIAL% veya %RAND:x% makrolarından yalnızca birini içermelidir"
+ "ScopeTypes": {
+ "allDevices": "tüm aygıtlar",
+ "allUsers": "Tüm Kullanıcılar",
+ "allUsersAndDevices": "Tüm Kullanıcılar ve Tüm Cihazlar",
+ "selectedGroups": "Seçili Gruplar"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Açıklama",
+ "placeholder": "Açıklama girin"
+ },
+ "NameTextBox": {
+ "label": "Ad",
+ "placeholder": "Bir ad girin"
+ },
+ "PublisherTextBox": {
+ "label": "Yayımcı",
+ "placeholder": "Yayımcı girin"
+ },
+ "VersionTextBox": {
+ "label": "Sürüm"
+ },
+ "headerDescription": "Yazdığınız algılama ve düzeltme betiklerinden yeni bir özel betik paketi oluşturun."
},
- "ConfigureComputerNameTemplate": {
- "description": "Cihazlarınız için benzersiz bir ad oluşturun. Ad en fazla 15 karakter olmalıdır ve harf (a-z, A-Z), sayı (0-9) ve kısa çizgi içerebilir. Ad yalnızca sayıdan oluşamaz ve boşluk içeremez. Donanıma özgü bir seri numarası eklemek için %SERIAL% makrosunu kullanın. Alternatif olarak rastgele bir sayı dizesi eklemek için x değişkeninin basamak sayısına eşit olduğu %RAND:x% makrosunu kullanın."
- },
- "EnableWhiteGlove": {
- "infoBalloon": "Cihazı kaydetmek ve sistem bağlamındaki tüm uygulama ve ayarları sağlamak amacıyla OOBE'yi kullanıcı kimlik doğrulaması olmadan çalıştırmak için Windows tuşuna 5 kere basmayı etkinleştirin. Kullanıcı bağlamı uygulama ve ayarlar, kullanıcı oturum açtığında teslim edilir.",
- "label": "Önceden sağlanan dağıtıma izin ver"
- },
- "HybridAzureADSkipConnectivityCheck": {
- "infoBalloon": "Autopilot Microsoft Entra hibrit katılma akışı, OOBE sırasında etki alanı denetleyicisi bağlantısı oluşturmasa bile devam eder.",
- "label": "AD bağlantı denetimini atla"
- },
- "accountType": "Kullanıcı hesabı türü",
- "accountTypeInfo": "Cihazdaki kullanıcıların yönetici mi yoksa standart kullanıcı mı olduğunu belirtin. Bu ayarın Genel Yönetici veya Şirket Yöneticisi hesaplarına uygulanmadığını unutmayın. Bu hesaplar, Microsoft Entra Kimliği'ndeki tüm yönetici özelliklerine erişebileceği için standart kullanıcılar atanamaz.",
- "configOOBEInfo": "
\r\nAutopilot cihazlarınızın ilk kez kullanım deneyimini yapılandırın\r\n
",
- "configureDevice": "Dağıtım modu",
- "configureDeviceHintForSurfaceHub2": "Autopilot, Surface Hub 2 için yalnızca kendi kendine dağıtım modunu destekler. Bu mod, kullanıcıyı kayıtlı cihazla ilişkilendirmediğinden kullanıcı kimlik bilgilerini gerektirmez.",
- "configureDeviceHintForWindowsPC": "
\r\n Dağıtım modu, bir kullanıcının cihaz sağlamak için kimlik bilgilerini girmesi gerekip gerekmediğini belirler.\r\n
\r\n
\r\n
\r\n Kullanıcı Temelli: Cihazlar, cihazı kaydeden kullanıcıyla ilişkilendirilir ve cihazın sağlanması için kullanıcı kimlik bilgileri gereklidir\r\n
\r\n
\r\n Otomatik dağıtım (önizleme): Cihazlar, cihazı kaydeden kullanıcıyla ilişkilendirilmez ve cihazın sağlanması için kullanıcı kimlik bilgileri gerekli değildir\r\n
\r\n
",
- "createSurfaceHub2Info": "Surface Hub 2 cihazlarınız için Autopilot kayıt ayarlarını yapılandırın. Autopilot'ta ilk kez çalıştırma deneyimi sırasında kullanıcı kimliğini doğrulamayı atlama varsayılan olarak etkindir. Surface Hub 2 için Windows Autopilot hakkında daha fazla bilgi edinin.",
- "createWindowsPCInfo": "\r\n
\r\nKendi kendine dağıtım modunda Autopilot cihazları için şu seçenekler otomatik olarak etkinleştirilir:\r\n
\r\n
\r\n
\r\n İş veya Ev kullanımı seçimini atla\r\n
\r\n
\r\n OEM kaydını ve OneDrive yapılandırmasını atla\r\n
",
- "endUserDevice": "Kullanıcı Temelli",
- "hideEscapeLink": "Hesabı değiştirme seçeneklerini gizle",
- "hideEscapeLinkInfo": "Hesabı değiştirme ve farklı bir hesapla yeniden başlama seçenekleri, sırasıyla şirket oturum açma sayfasında ve etki alanı hata sayfasında ilk cihaz kurulumu sırasında görüntülenir. Bu seçenekleri gizlemek için Microsoft Entra Kimliği'nde şirket markasını yapılandırmanız gerekir (Windows 10, 1809 ve üzeri bir sürüm veya Windows 11 gerektirir).",
- "info": "Autopilot profili ayarları, kullanıcıların Windows'u ilk kez başlattığında göreceği ilk çalıştırma deneyimini tanımlar.",
- "language": "Dil (Bölge)",
- "languageInfo": "Kullanılacak dili ve bölgeyi belirtin.",
- "licenseAgreement": "Microsoft Yazılım Lisans Koşulları",
- "licenseAgreementInfo": "EULA'nın kullanıcılara gösterilip gösterilmeyeceğini belirtin.",
- "plugAndForgetDevice": "Kendi Kendine Dağıtılıyor",
- "privacySettingWarning": "Windows 10, sürüm 1903 ve sonraki sürümleri veya Windows 11’i çalıştıran cihazlarda, tanılama verilerinin toplanmasına ilişkin varsayılan değer değişti. ",
- "privacySettings": "Gizlilik ayarları",
- "privacySettingsInfo": "Gizlilik ayarlarının kullanıcılara gösterilip gösterilmeyeceğini belirtin.",
- "showCortanaConfigurationPage": "Cortana yapılandırması",
- "showCortanaConfigurationPageInfo": "Göster seçeneği, başlangıçta Cortana yapılandırma girişini etkinleştirir.",
- "skipEULAWarning": "Lisans koşullarını gizleme hakkında önemli bilgiler",
- "skipKeyboardSelection": "Klavyeyi otomatik olarak yapılandırma",
- "skipKeyboardSelectionInfo": "True değerindeyse Dil ayarlı olduğunda klavye seçimi sayfasını atlayın.",
- "subtitle": "Autopilot profilleri",
- "title": "İlk çalıştırma deneyimi (OOBE)",
- "useOSDefaultLanguage": "İşletim sistemi varsayılanı",
- "userSelect": "Kullanıcı seçimi"
- },
- "Sync": {
- "lastRequestedLabel": "Son eşitleme isteği",
- "lastSuccessfulLabel": "Son başarılı eşitleme",
- "syncInProgress": "Eşitleme sürüyor. En kısa zamanda tekrar gelin.",
- "syncInitiated": "Autopilot ayarları eşitlemesi başlatıldı.",
- "syncSettingsTitle": "Autopilot ayarlarını eşitle"
- },
- "Title": {
- "devices": "Windows Autopilot cihazları"
- },
- "Tooltips": {
- "addressableUserName": "Cihaz kurulumu sırasında görüntülenen karşılama adı.",
- "azureADDevice": "İlişkili cihaz için cihaz ayrıntılarına gidin. Yok, ilişkili cihaz olmadığını gösterir.",
- "batch": "Bir cihaz grubunu tanımlamak için kullanılabilen bir dize özniteliği. Intune'un Grup Etiketi alanı, Microsoft Entra cihazlarındaki OrderID özniteliğine eşlenir.",
- "dateAssigned": "Profilin cihaza atandığı tarihin zaman damgası.",
- "deviceAccountPwd": "Surface Hub cihazları için cihaz hesabı parolası. Bu bilgi girildiyse cihaz hesabını ve kolay adı da girin.",
- "deviceAccountUpn": "Surface Hub cihazları için cihaz hesabı e-posta adresi. Bu bilgi girildiyse cihaz hesabı parolasını ve kolay adı da girin.",
- "deviceDisplayName": "Bir cihaz için benzersiz bir ad yapılandırın. Bu ad, Microsoft Entra hibrit ile katılan dağıtımlarda yok sayılacak. Cihaz adı, Microsoft Entra hibrit cihazları için hala etki alanı katılım profilinden gelir.",
- "deviceFriendlyName": "Surface Hub cihazları için kolay ad. Bu bilgi girildiyse cihaz hesabını ve cihaz hesabı parolasını da girin.",
- "deviceName": "Kullanıcı, cihazı bulmaya ve bu cihaza bağlanmaya çalışırken görüntülenen ad.",
- "deviceUseType": " Cihaz, seçiminize bağlı olarak ayarlanır. Daha sonra her zaman Ayarlar'dan değişiklik yapabilirsiniz.\r\n
\r\n
Toplantılar ve sunular için, Windows Hello açık değildir ve her oturumdan sonra veriler kaldırılır.\r\n
\r\n
Ekip işbirliği için, Windows Hello açıktır ve profiller hızlı oturum açma için kaydedilir
\r\n
",
- "enrollmentState": "Cihazın kaydolup kaydolmadığını belirtir.",
- "intuneDevice": "İlişkili cihaz için cihaz ayrıntılarına gidin. Yok, ilişkili cihaz olmadığını gösterir.",
- "lastContacted": "Cihazla son bağlantı kurulan tarihin zaman damgası.",
- "make": "Seçilen cihazın üreticisi.",
- "model": "Seçilen cihazın modeli",
- "profile": "Cihaza atanmış profilin adı.",
- "profileStatus": "Cihazın profile atanıp atanmadığını belirtir.",
- "purchaseOrderId": "Satın alma sipariş kimliği",
- "resourceAccount": "Cihazın kimliği veya kullanıcı asıl adı (UPN).",
- "serialNumber": "Seçilen cihazın seri numarası.",
- "userPrincipalName": "Cihazın kurulumu sırasında kullanıcı, kimlik doğrulama bilgisini önceden dolduracaktır."
- },
- "allDevices": "Tüm cihazlar",
- "allDevicesAlreadyAssignedError": "Tüm Cihazlara zaten bir Autopilot profili atandı.",
- "assignFailedDescription": "{0} için atamalar güncelleştirilemedi.",
- "assignFailedTitle": "Autopilot profil atamaları güncelleştirilemedi.",
- "assignSuccessDescription": "{0} atamaları başarıyla güncelleştirildi.",
- "assignSuccessTitle": "Autopilot profil atamaları başarıyla güncelleştirildi.",
- "assignSufaceHub2ProfileNextStep": "Bu dağıtım için sonraki adımlar",
- "assignSurfaceHub2ProfileToDeviceGroup": "1. Bu profili en az bir cihaz grubuna atayın",
- "assignSurfaceHub2ProfileToResourceAccount": "2. Bu profili dağıttığınız her Surface Hub cihazına bir kaynak hesabı atayın",
- "assignedDevicesCount": "Atanan cihazlar",
- "assignedDevicesResourceAccountDescription": "
Bu profilin bir cihaza dağıtılması için cihaza bir Kaynak hesabı atamanız gerekir. Mevcut bir Kaynak hesabını atamak veya yeni bir hesap oluşturmak için tek seferde bir cihaz seçin. Kaynak hesapları hakkında daha fazla bilgi edinin
",
- "assignedDevicesResourceAccountStatusBarMessage": "Bu tablo yalnızca bu profile atanmış olan Surface Hub 2 cihazlarını listeler.",
- "assigningDescription": "{0} atamaları güncelleştiriliyor.",
- "assigningTitle": "Autopilot profil atamaları güncelleştiriliyor.",
- "autoremediationContext": "Bu cihazda bir donanım değişikliği algılandı. Yeni donanım otomatik olarak kaydedilmeye çalışılıyor. Şu anda bir şey yapmanız gerekmez. Durum, sonuçla birlikte bir sonraki iadede güncelleştirilecek. Profili sıfırlama hakkında daha fazla bilgi edinin.",
- "autoremediationTitle": "{0} cihazının bekleyen bir düzeltmesi var",
- "cannotDeleteMessage": "Bu profil gruplara atanmış. Silmek için önce bu profilden tüm grupların atamasını kaldırmanız gerekir.",
- "cannotDeleteTitle": "{0} silinemiyor",
- "createdDateTime": "Oluşturuldu",
- "deleteMessage": "Bu Autopilot profilini silerseniz bu profile atanmış tüm cihazlar Atanmamış olarak görüntülenir.",
- "deleteMessageWithPolicySet": "{0} bir veya daha fazla ilke kümesine eklenmiş. {0} öğesini silerseniz, bu öğeyi artık bu ilke kümeleri aracılığıyla atayamazsınız.",
- "deleteTitle": "Bu profili silmek istediğinizden emin misiniz?",
- "description": "Açıklama",
- "deviceType": "Cihaz türü",
- "deviceUse": "Cihaz kullanımı",
- "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot, Surface Hub 2 cihazları için yalnızca Microsoft Entra'ya Katılmış olarak desteklenir. Cihazların kuruluşunuzda Active Directory'ye (AD) katılma yöntemini belirtin.\r\n
\r\n
\r\n
\r\n Microsoft Entra'ya katılmış: Şirket içi Windows Server Active Directory olmadan yalnızca bulut.\r\n
\r\n Cihazların kuruluşunuzda Active Directory'ye (AD) nasıl katıldığını belirtin:\r\n
\r\n
\r\n
\r\n Microsoft Entra'ya katılmış: Şirket içi Windows Server Active Directory olmadan yalnızca bulutta\r\n
\r\n
\r\n ",
- "getAssignedDevicesCountError": "Atanan cihaz sayısı getirilirken bir hata oluştu.",
- "getAssignmentsError": "Autopilot profil atamaları getirilirken bir hata oluştu.",
- "harvestDeviceId": "Hedeflenen tüm cihazları Autopilot'a dönüştür",
- "harvestDeviceIdDescription": "Bu profil, varsayılan olarak yalnızca Autopilot hizmetinden eşitlenen Autopilot cihazlarına uygulanabilir.",
- "harvestDeviceIdInfo": "\r\n Zaten kayıtlı değillerse, hedeflenen tüm cihazları Autopilot'a kaydetmek için Evet'i seçin. Kayıtlı cihazlar, bir sonraki Windows İlk Kez Çalıştırma Deneyimi'nden (OOBE) geçişlerinde, atanan Autopilot senaryosunu tamamlar.\r\n \r\n Bazı Autopilot senaryoları için belirli en düşük Windows derlemelerinin gerektiğini lütfen unutmayın. Lütfen cihazınızda senaryoyu tamamlamak için gereken minimum derlemenin bulunduğundan emin olun.\r\n \r\n Bu profili kaldırdığınızda, etkilenen cihazlar Autopilot'tan kaldırılmaz. Bir cihazı Autopilot'tan kaldırmak için Windows Autopilot Cihazları görünümünü kullanın.\r\n ",
- "harvestDeviceIdWarning": "Dönüşümden sonra Autopilot cihazları yalnızca Autopilot cihazları listesinden silinerek geri döndürülebilir.",
- "holoLensCommandMenu": "HoloLens",
- "info": "Windows Autopilot dağıtım profilleri cihazlarınızın ilk çalıştırma deneyimini özelleştirmenize olanak sağlar.",
- "invalidProfileNameMessage": "\"{0}\" karakterine izin verilmiyor",
- "joinTypeLabel": "Microsoft Entra Kimliği’ne katılım türü:",
- "lastModifiedDateTime": "Son değiştirme:",
- "manualRemediationContext": "Bu cihazda bir donanım değişikliği algılandı. Cihazı yeniden kaydetmediğiniz sürece sıfırlandığında otomatik olarak bir Autopilot profili almaz. Profili sıfırlama hakkında daha fazla bilgi edinin.",
- "manualRemediationTitle": "{0} cihazıyla ilgilenmeniz gerekiyor",
- "name": "Ad",
- "noAutopilotProfile": "Autopilot profili yok",
- "notEnoughPermissionAssignedError": "Bu profili seçili gruplarınızdan en az birine atamak için yeterli izniniz yok. Lütfen yöneticinize başvurun.",
- "profile": "profil",
- "resourceAccountStatusBarMessage": "Bu profilin dağıtıldığı her Surface Hub 2 cihazı için bir Kaynak Hesabı gerekir. Daha fazla bilgi için tıklayın.",
- "selectServices": "Cihazların katılacağı dizin hizmetini seçin",
- "surfaceHub2CommandMenu": "Surface Hub 2",
- "surfaceHub2SCommandMenu": "Surface Hub 2S",
- "userAffinityLabel": "Dağıtım modu",
- "windowsPCCommandMenu": "Windows Kişisel Bilgisayarı",
- "directoryServiceLabel": "Microsoft Entra Kimliği’ne katılım türü:"
- },
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Yönetici Grupları",
- "RoleAssignmentAdminDesc": "Yönetici grubu kullanıcıları, bu role atanmış olan yöneticilerdir",
- "rolesMenuTitle": "Endpoint Manager rolleri",
- "RoleAssignmentScopeDesc": "Bu rol atamasındaki yöneticiler ilkeleri, uygulamaları ve uzak görevleri hedefleyebilir",
- "RoleAssignmentScope": "Kapsam Grupları"
- },
+ "ScopeTags": {
+ "headerDescription": "Betik paketini atamak için en az bir grup seçin."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Algılama betiği",
+ "placeholder": "Betik metni girin",
+ "requiredValidationMessage": "Lütfen algılama betiğini girin"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Betik imzası denetimini zorla"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Bu betiği oturum açmış olan kullanıcının kimlik bilgilerini kullanarak çalıştır"
+ },
+ "RemediationScript": {
+ "infoBox": "Düzeltme betiği bulunmadığından bu betik yalnızca algılama modunda çalışacak."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Düzeltme komut dosyası",
+ "placeholder": "Betik metni girin"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Betiği 64 bit PowerShell'de çalıştır"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Geçersiz betik. Betikte kullanılan bir veya daha fazla karakter geçerli değil."
+ },
+ "headerDescription": "Yazdığınız betiklerden özel bir betik paketi oluşturun. Varsayılan olarak betikler, atanmış cihazlarda her gün çalıştırılır.",
+ "infoBox": "Bu betik salt okunur. Bu betik için bazı ayarlar devre dışı bırakılmış olabilir."
+ },
+ "title": "Özel betik oluştur",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Aralık",
+ "time": "Tarih ve saat"
+ },
+ "Interval": {
+ "day": "Her gün yinelenir",
+ "days": "{0} günde bir yinelenir",
+ "hour": "Her saat yinelenir",
+ "hours": "{0} saatte bir yinelenir",
+ "month": "Her ay yinelenir",
+ "months": "{0} ayda bir yinelenir",
+ "week": "Her hafta yinelenir",
+ "weeks": "{0} haftada bir yinelenir"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{1} {0} (UTC)",
+ "withDate": "{1} {0}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Düzenle - {0}"
+ }
+ },
"MinimumOperatingSystem": {
"Android": {
"v10": "Android 10.0",
@@ -1111,7 +263,8 @@
},
"V11Release": {
"release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
},
"v10": "Windows 10.0",
"v80": "Windows 8.0",
@@ -1122,43 +275,14 @@
"v81": "Windows Phone 8.1"
}
},
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Yalnızca teknisyen aşamasında seçili engelleyici uygulamaları başarısız kıl",
- "apps": "uygulamalar",
- "appsListName": "Uygulama listesi",
- "blockingApps": "Engelleyici uygulamalar",
- "managedApps": "Yönetilen uygulamalar",
- "noApps": "Uygulama yok",
- "noAppsError": "Uygulamalar alınırken hata oluştu",
- "selectApps": "Uygulama seç",
- "selectedAppsCount": "{0} uygulama seçildi (en fazla 100)",
- "useSelectedAppsAll": "Tümü",
- "useSelectedAppsSelected": "Seçili",
- "useSelectedAppsToggleLabel": "Gerekli uygulamalar kullanıcıya/cihaza atanmışsa bu uygulamalar yüklenene kadar cihaz kullanımını engelle"
- },
- "Header": {
- "application": "Uygulama",
- "publisher": "Yayımcı",
- "version": "Sürüm"
- },
- "SearchBox": {
- "ariaLabel": "Uygulamaları arayın",
- "placeHolder": "Ada ve yayımcıya göre ara"
- },
- "allowToUseToggle": "Yükleme hatası oluşursa kullanıcıların cihazı kullanmasına izin ver",
- "blockToggle": "Tüm uygulamalar ve profiller yüklenene kadar cihaz kullanımını engelle",
- "blockToolTip": "Örneğin, Microsoft Word’ü bu listeye eklerseniz, hedeflenen kullanıcılar ve cihazlar Word başarıyla yükleninceye kadar kayıt anlaşması durumu sayfasından ayrılamaz.",
- "collectLogToggle": "Son kullanıcılar için günlük toplama ve tanılama sayfasını aç",
- "create": "Profil Oluşturma",
- "customMessageTextBox": "Hata iletisi",
- "customMessageToggle": "Zaman sınırı veya hatası oluştuğunda özel ileti göster",
- "enableForAutopilotOnlyToggle": "İlk çalıştırma deneyimi (OOBE) tarafından sağlanan cihazlarda yalnızca sayfayı göster",
- "installQualityUpdatesToggle": "Windows kalite güncelleştirmelerini yükleyin (cihazı yeniden başlatabilir) (önizleme)",
- "progressToggle": "Uygulama ve profil yapılandırma ilerlemesini göster",
- "resetToggle": "Yükleme hatası oluşursa kullanıcıların cihazı sıfırlamasına izin ver",
- "timeout": "Yükleme belirtilen dakikadan uzun sürerse hata göster"
- },
+ "OfficeUpdateChannel": {
+ "current": "Geçerli Kanal",
+ "deferred": "Altı Aylık Kurumsal Kanal",
+ "firstReleaseCurrent": "Geçerli Kanal (Önizleme)",
+ "firstReleaseDeferred": "Yarı Yıllık Kurumsal Kanal (Önizleme)",
+ "monthlyEnterprise": "Aylık Kurumsal Kanal",
+ "placeHolder": "Birini seçin"
+ },
"TableHeaders": {
"activity": "Etkinlik",
"activityName": "Etkinlik adı",
@@ -1293,30 +417,175 @@
"excludedGroups": "Dışlanan Gruplar",
"licenseType": "Lisans türü"
},
- "TAP": {
- "AccessRequirements": {
- "infoText": "Kullanıcıların bir iş bağlamındaki uygulamalara erişmek için karşılaması gereken PIN ve kimlik bilgisi gereksinimlerini yapılandırın."
- },
- "DataProtection": {
- "infoText": "Bu grup kesme, kopyalama, yapıştırma ve farklı kaydetme kısıtlamaları gibi Veri Kaybı Önleme (DLP) denetimlerini içerir. Bu ayarlar, kullanıcıların uygulamalardaki verilerle nasıl etkileşim kurduğunu belirler."
- },
- "DeviceTypes": {
- "selectOne": "En az bir cihaz türü seçin."
- },
- "TargetedApps": {
- "TargetToAll": {
- "label": "Tüm cihaz türlerindeki uygulamaları hedefle"
- },
- "infoText": "Bu ilkeyi farklı cihazlardaki uygulamalara nasıl uygulamak istediğinizi seçin. Ardından en az bir uygulama ekleyin.",
- "selectOne": "İlke oluşturmak için en az bir uygulama seçin."
- }
- },
- "AssignmentAction": {
- "exclude": "Dışlandı",
- "include": "Dahil edilen",
- "includeAllDevicesVirtualGroup": "Dahil edilen",
- "includeAllUsersVirtualGroup": "Dahil edilen"
- },
+ "Inputs": {
+ "accountDomain": "Hesap etki alanı",
+ "accountDomainHint": "örneğin contosodomain",
+ "accountDomainInfoBalloon": "Kullanıcının hesap etki alanını belirtin.",
+ "accountTypeInfoBalloon": "Kimlik doğrulaması modeline dayanarak yapılandırılan hesap türünü belirtin",
+ "allowContactSetting": "Kullanıcının kişi ayarını değiştirmesine izin ver",
+ "allowContactSyncInfoBalloon": "Kullanıcının kişi eşitleme ayarını değiştirmesine izin verilip verilmediğini belirtin",
+ "allowUserChange": "Kullanıcının ayar değiştirmesine izin ver",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Lütfen com.microsoft.word gibi bir paket adı girin",
+ "androidUrlValidation": "Şuna benzer geçerli bir URL girin: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=tr",
+ "appInstallContext": "Uygulama yükleme bağlamı",
+ "appUrlLabel": "App Store URL'si",
+ "appleUrlValidation": "Şuna benzer geçerli bir URL girin: https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "İlgili cihaz türü",
+ "assignmentActionLabel": "Mod",
+ "authenticationMethodInfoBalloon": "Kullanıcı için kimlik doğrulaması yöntemini belirtin",
+ "authenticationMetod": "Kimlik doğrulama yöntemi",
+ "authenticationType": "Kimlik doğrulaması türü",
+ "authenticationTypeInfoBalloon": "Kullanıcı için kimlik doğrulaması türünü belirtin",
+ "availableLicenseCount": "Kullanılabilir lisanslar",
+ "basicAuth": "Temel kimlik doğrulama",
+ "biometricsInfoBalloon": "Kullanıcıların cihazlarında uygulamaya erişmeleri için TouchID veya FaceID gibi biyometrik bilgiler gerekebilir. Bu bilgiler gerekli kılındığında, bu profilde seçilen kimlik doğrulaması yöntemine ek olarak kullanılır. Uygulama koruma ilkesi yönetilen verilere erişim öncesinde erişim gereksinimleri içerdiğinden bu ayar, Intune Uygulama Koruma İlkeleri dağıtıldığında etkinleştirilmemelidir. Her ikisinin de etkinleştirilmesi, Outlook mobile erişim için birden fazla erişim isteğiyle sonuçlanır. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır. ",
+ "bookNameLabel": "Kitap adı",
+ "bundleDescriptionHint": "Dahil edilen uygulamalar için bir açıklama girin.",
+ "calendar": "Takvim",
+ "categoryLabel": "Kategori",
+ "categoryNameLabel": "Varsayılan ad",
+ "certProfileType": "Sertifika profili türü",
+ "certificate": "Sertifika",
+ "certificates": "Sertifikalar",
+ "commandLineLabel": "Komut satırı bağımsız değişkenleri",
+ "commandLineSizeHint": "Komut satırı bağımsız değişken metni uzunluğunun üst sınırı 1024 karakterdir",
+ "configurationSettingsFormatLabel": "Yapılandırma ayarları biçimi",
+ "configurationSettingsLabel": "Ayarlar biçimi",
+ "contactSync": "Kişileri Kaydet",
+ "contactSyncInfoBalloon": "Mobil cihazın yerel adres defterine kişi kaydetmek, yeni aramaların ve kısa mesajların kullanıcının mevcut Outlook kişilerine bağlanmasını sağlar. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
+ "contacts": "İlgili Kişiler",
+ "createdDateTime": "Oluşturuldu",
+ "defaultCategoryHint": "Varsayılan kategoriler değiştirilemez",
+ "deploySMimeCertsFromIntune": "Intune'dan S/MIME sertifikaları dağıt",
+ "descriptionGenericLabel": "Açıklama",
+ "descriptionHint": "Açıklama girin...",
+ "descriptionLabel": "Açıklama",
+ "descriptionSizeHint": "Açıklamanın uzunluğu 10.000 karakterden uzun olmamalıdır",
+ "developerLabel": "Geliştirici",
+ "developerSizeHint": "Geliştirici adının uzunluk üst sınırı 256 karakterdir.",
+ "disable": "Devre Dışı Bırak",
+ "disabled": "Devre dışı",
+ "displayNameLabel": "Ad",
+ "displayVersionHint": "Uygulama sürümünü girin",
+ "displayVersionLabel": "Uygulama Sürümü",
+ "displayVersionLengthCheck": "Görüntü sürümünün uzunluğu en fazla 130 karakter olmalıdır",
+ "eBookCategoryNameLabel": "Varsayılan ad",
+ "emailAccount": "E-posta hesabı adı",
+ "emailAccountHint": "örn. Kurumsal E-posta",
+ "emailAccountInfoBalloon": "E-posta hesabının kullanıcılara cihazlarında görüntülenecek olan görünen adını belirtin",
+ "emailAddressAttribute": "Microsoft Entra kimliğinden kullanıcı e-posta adresi özniteliği",
+ "emailAddressInfoBalloon": "Posta göndermek ve almak için kullanılacak olan e-posta adresini belirtin",
+ "emailServer": "E-posta Sunucusu",
+ "emailServerHint": "örneğin mail.contoso.com",
+ "emailServerInfoBalloon": "Exchange Server sunucunuzun konak adını belirtin",
+ "enable": "Etkinleştir",
+ "enableSMime": "S/MIME'yi etkinleştir",
+ "enabled": "Etkin",
+ "encryptAllEmails": "Tüm e-postaları şifrele",
+ "encryptionCertificates": "Şifreleme sertifikaları",
+ "endUserNotifications": "Son kullanıcı bildirimleri",
+ "enrollmentTypeLabel": "Cihaz kayıt türü",
+ "externalRecipients": "Dış alıcılar Posta İpucu",
+ "externalRecipientsInfoBalloon": "Dış Alıcılar Posta İpucu, gönderenin bir dış alıcı veya dış alıcı içeren bir dağıtım grubu eklemesi durumunda görüntülenir. Bu Posta İpucu, gönderenleri oluşturdukları iletinin kuruluş dışına çıkıp çıkmayacağı konusunda bilgilendirerek sözcük seçimi, üslup ve içerik konusunda doğru kararlar alınmasına yardımcı olur. Yalnızca hibrit modern kimlik doğrulamasından yararlanan Exchange Online hesapları ve şirket hesapları için kullanılabilir. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık'tır.",
+ "focusedInbox": "Odaklanmış Gelen Kutusu",
+ "focusedInboxInfoBalloon": "Odaklanmış Gelen Kutusu, gelen kutunuzu iki sekmeye ayırır: Odaklanmış ve Diğer. En önemli e-postalarınız Odaklanmış sekmesindeyken diğerleri kolayca ulaşılabilir ancak gözden uzak bir yerde, Diğer sekmesinde durur. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır. ",
+ "fullScreenEnabledLabel": "Tam ekran",
+ "gmailNineAmountOfEmail": "Eşitlenecek e-posta miktarı",
+ "gmailNineAuthenticationMethodInfoBalloon": "Kullanıcıların e-posta sunucusunda nasıl kimlik doğrulaması yapmasını istediğinizi seçin. Son kullanıcılar için en güvenli ve sorunsuz deneyimi sağlamak üzere sertifikaları kullanın. Cihaz sahibi cihazlarına yönelik SCEP ve PKCS sertifika profilleri bulunmadığından sertifika tabanlı kimlik doğrulaması henüz kullanılamıyor. ",
+ "gmailNineCertificateUPNInfoBalloon": "Sertifika, kullanıcı asıl adını (UPN) bir konu diğer adı olarak içermelidir.",
+ "gmailNineEmailAddressInfoBalloon": "Intune’nın, profil tarafından kullanılacak e-posta adresini dinamik olarak oluşturmak için Microsoft Entra Kimliğinden aldığı öznitelik. Örneğin, MyName@contoso.com (UPN). E-posta profilleri için Microsoft Entra öznitelikleri hakkında daha fazla bilgi edinin.",
+ "gmailNineEmailServerInfoBalloon": "Belirttiğiniz uygulamanın e-posta almak için bağlandığı e-posta sunucusunun Exchange konumu (URL).",
+ "gmailNineEmailSynchronizeInfoBalloon": "İstemcinin kaç e-postayı eşitleyeceğini denetleyin.",
+ "gmailNineSSLInfoBalloon": "E-posta sunucusu ile yapılan tüm iletişimin güvenliğini sağlamaya yardımcı olmak için SSL'yi etkinleştirin.",
+ "gmailNineUsernameInfoBalloon": "Intune’nın, profil tarafından kullanılacak kullanıcı adını dinamik olarak oluşturmak için Microsoft Entra Kimliğinden aldığı öznitelik. Örneğin, MyName@contoso.com (UPN) veya MyName (kullanıcı adı). E-posta profilleri için Microsoft Entra öznitelikleri hakkında daha fazla bilgi edinin.",
+ "ignoreManifestScope": "Bildirim kapsamını yoksay",
+ "ignoreVersionDetection": "Uygulama sürümünü yoksay",
+ "informationUrlLabel": "Bilgi URL'si",
+ "informationUrlSizeHint": "Bilgi URL’sinin en yüksek uzunluğu 1024 karakterdir",
+ "installAsManaged": "Yönetilen olarak yükle",
+ "installationSourceLabel": "Uygulama türü",
+ "installerTypeInfoBalloon": "Uygulama paketinin yükleyici türü.",
+ "installerTypeLabel": "Yükleyici Türü",
+ "isFeatured": "Bunu Şirket Portalı'nda öne çıkan uygulama olarak görüntüle",
+ "isMAMEnabledToggleLabel": "Evet",
+ "lastModifiedDateTime": "Son güncelleştirme Zamanı",
+ "ldapUrl": "LDAP URL'si",
+ "licensingType": "Cihaz bağlamı atamasını destekler",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimum işletim sistemi",
+ "modernAuth": "Modern kimlik doğrulaması",
+ "nameHint": "Bir ad girin",
+ "nameLabel": "Ad",
+ "nameSizeHint": "Ad uzunluğunun üst sınırı 512 karakterdir.",
+ "notConfigured": "Yapılandırılmadı",
+ "notesLabel": "Notlar",
+ "notesSizeHint": "Not metni uzunluğunun üst sınırı 1024 karakterdir.",
+ "notificationType": "Bildirim türü",
+ "oneDay": "Bir Gün",
+ "oneMonth": "Bir Ay",
+ "oneWeek": "Bir Hafta",
+ "outlookSMimeSettings": "Outlook S/MIME ayarları",
+ "ownerLabel": "Sahip",
+ "ownerSizeHint": "Sahip adı uzunluğunun üst sınırı 256 karakterdir.",
+ "packageIdLabel": "Paket Tanımlayıcısı",
+ "packageNameLabel": "Paket adı",
+ "pivCredentialNotConfigured": "Kiracınız için türetilmiş kimlik bilgisi veren seçmediniz. Bu ilkeyi cihazlara başarıyla uygulayabilmeniz için önce bir veren yapılandırmanız gerekiyor.",
+ "platformLabel": "Platform",
+ "policyDescriptionLabel": "Açıklama",
+ "policyNameLabel": "Ad",
+ "preComposedIconEnabled": "Önceden derlenmiş",
+ "primarySMTPAddress": "Birincil SMTP Adresi",
+ "privacyUrlLabel": "Gizlilik URL'si",
+ "publisherHint": "Bir yayımcı adı girin",
+ "publisherLabel": "Yayımcı",
+ "publisherSizeHint": "Yayımcı adının uzunluğu 2 ile 1024 karakter arasında olmalıdır (bu sayılar dahil)",
+ "require": "Gerekli Kıl",
+ "requireBiometrics": "Uygulamaya erişmek için Biyometriyi gerekli kıl",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "En az bir kapsam etiketi gereklidir",
+ "searchAppLabel": "Uygulama seçin",
+ "searchAppLinkText": "App Store'da Ara",
+ "searchWinGetPublicRepositoryLinkText": "Windows Paket Yöneticisi Topluluk Deposu’nda Arama Yapın",
+ "searchWinGetStoreRepositoryLinkText": "Microsoft Store uygulamasında (yeni) arama yapın",
+ "selectAAD": "Microsoft Entra özniteliği seçin",
+ "selectAppFileLabel": "Dosya seçin",
+ "selectAppFileLinkText": "Uygulama paketi dosyası seçin",
+ "selectAppFileToUpdateLabel": "Güncelleştirilecek dosyayı seçin",
+ "selectAuthMethod": "Kimlik doğrulama yöntemi seçin",
+ "selectAuthType": "Kimlik doğrulaması türü seçin",
+ "selectCatalogAppLabel": "Uygulama seçin",
+ "selectCatalogAppLinkText": "Kurumsal Uygulama Kataloğunda arayın",
+ "selectCertificate": "Sertifika seçin",
+ "signAllEmails": "Tüm e-postaları imzalayın",
+ "signingCertificates": "İmzalama sertifikaları",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Paket Açıklaması",
+ "suiteNameLabel": "Paket Adı",
+ "targetApplicationBundleIdentifier": "Hedef uygulama paketi tanımlayıcısı",
+ "targetedPlatformsLabel": "Hedeflenen platform",
+ "tasks": "Görevler",
+ "threeDays": "Üç Gün",
+ "totalLicenseCount": "Toplam lisans sayısı",
+ "twoWeeks": "İki Hafta",
+ "unifiedAssignmentsLabel": "Şuna ata:",
+ "unlimited": "Sınırsız",
+ "urlHint": "Geçerli bir url girin",
+ "useManagedBrowserHint": "Yalnızca Android ve iOS. Daha fazla bilgi edinin",
+ "useManagedBrowserLabel": "Bu bağlantının açılabilmesi için yönetilen tarayıcı gerektir",
+ "userPrinicipalName": "Kullanıcı Asıl Adı",
+ "username": "Kullanıcı adı",
+ "usernameAttribute": "Microsoft Entra kimliğinden kullanıcı adı özniteliği",
+ "usernameAttributreInfoBalloon": "Hesap kimliğini doğrulamak için kullanılacak olan e-posta profili Kullanıcı Asıl Adı'nı belirtin",
+ "usernamePassword": "Kullanıcı adı ve parola",
+ "webAppUrlHint": "http:// veya https:// ile başlayan geçerli bir url girin",
+ "webAppUrlLabel": "Uygulama URL'si",
+ "webAppUrlSizeHint": "Uygulama URL’sinin maksimum uzunluğu 1024 karakterdir",
+ "windowsUrlValidation": "Aşağıdakine benzer geçerli bir URL girin: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "Girilen XML Verileri",
+ "xmlFormatInvalid": "XML ilkesi biçimi geçersiz.",
+ "xmlTooLarge": "Giriş boyutu 1 MB'tan küçük olmalıdır."
+ },
"CoManagementAuthority": {
"Confirmation": {
"deleteMessage": "Etkilenen kullanıcılar, atanan bir sonraki en yüksek öncelikli ortak yönetim yetkilisi sayfasıyla veya atanmış başka bir ortak yönetim yetkilisi sayfası yoksa varsayılan ortak yönetim yetkilisi sayfasıyla sınırlanır.",
@@ -1372,52 +641,1473 @@
"pageTitle": "Ortak yönetim yetkilisi",
"settingDescription": "Ortak yönetim ayarları, iş yüklerine sahip kişileri belirler."
},
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise sistem uygulaması",
- "androidForWorkApp": "Yönetilen Google Play Store uygulaması",
- "androidLobApp": "Android iş kolu uygulaması",
- "androidStoreApp": "Android mağaza uygulaması",
- "builtInAndroid": "Yerleşik Android uygulaması",
- "builtInApp": "Yerleşik uygulama",
- "builtInIos": "Yerleşik iOS uygulaması",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS web klibi",
- "iosLobApp": "iOS iş kolu uygulaması",
- "iosStoreApp": "iOS mağaza uygulaması",
- "iosVppApp": "iOS Volume Purchase Program uygulaması",
- "lineOfBusinessApp": "İş kolu uygulaması",
- "macOSDmgApp": "macOS uygulaması (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS iş kolu uygulaması",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365 Uygulamaları (macOS)",
- "macOSPkgApp": "macOS uygulaması (PKG)",
- "macOSWebClip": "macOS web klibi",
- "macOsVppApp": "macOS Volume Purchase Program uygulaması",
- "managedAndroidLobApp": "Yönetilen Android iş kolu uygulaması",
- "managedAndroidStoreApp": "Yönetilen Android mağaza uygulaması",
- "managedGooglePlayApp": "Yönetilen Google Play Store uygulaması",
- "managedGooglePlayPrivateApp": "Yönetilen Google Play özel uygulaması",
- "managedGooglePlayWebApp": "Yönetilen Google Play web bağlantısı",
- "managedIosLobApp": "Yönetilen iOS iş kolu uygulaması",
- "managedIosStoreApp": "Yönetilen iOS mağaza uygulaması",
- "microsoftStoreForBusinessApp": "İş İçin Microsoft Store uygulaması",
- "microsoftStoreForBusinessReleaseManagedApp": "İş İçin Microsoft Store",
- "officeSuiteApp": "Microsoft 365 Uygulamaları (Windows 10 ve üzeri)",
- "webApp": "Web bağlantısı",
- "windowsAppXLobApp": "Windows AppX iş kolu uygulaması",
- "windowsClassicApp": "Windows uygulaması (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 ve üzeri)",
- "windowsMobileMsiLobApp": "Windows MSI iş kolu uygulaması",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX iş kolu uygulaması",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX iş kolu uygulaması",
- "windowsPhone81StoreApp": "Windows Phone 8.1 mağaza uygulaması",
- "windowsPhoneXapLobApp": "Windows Phone XAP iş kolu uygulaması",
- "windowsStoreApp": "Microsoft Store uygulaması (eski)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX iş kolu uygulaması",
- "windowsUniversalLobApp": "Windows Evrensel iş kolu uygulaması",
- "windowsWebApp": "Windows web bağlantısı"
- },
+ "AzureIAMCommon": {
+ "Recommended": "Önerilen",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahreyn",
+ "countryNameZA": "Güney Afrika",
+ "countryNameJO": "Ürdün",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Çek Cumhuriyeti",
+ "countryNameLT": "Litvanya",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ekvador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hong Kong ÖİB",
+ "countryNameGH": "Gana",
+ "countryNameSA": "Suudi Arabistan",
+ "countryNamePG": "Papua Yeni Gine",
+ "countryNameBW": "Botsvana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "Hindistan",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Romanya",
+ "countryNameKZ": "Kazakistan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Gürcistan",
+ "countryNameTT": "Trinidad ve Tobago",
+ "countryNameMP": "Kuzey Mariana Adaları",
+ "countryNameMV": "Maldivler",
+ "countryNameFI": "Finlandiya",
+ "countryNameNO": "Norveç",
+ "countryNameEE": "Estonya",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Özbekistan",
+ "countryNameME": "Karadağ",
+ "countryNameTJ": "Tacikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "Fransa",
+ "countryNameOM": "Umman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "İtalya",
+ "countryNameAZ": "Azerbaycan",
+ "countryNameKG": "Kırgızistan",
+ "countryNameWF": "Wallis ve Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falkland Adaları (Islas Malvinas)",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "Güney Sudan",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Suriye",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "Saint Vincent ve Grenadinler",
+ "countryNameID": "Endonezya",
+ "countryNameRE": "Reunion",
+ "countryNameER": "Eritre",
+ "countryNameMK": "Kuzey Makedonya",
+ "countryNameTG": "Togo",
+ "countryNamePF": "Fransız Polinezyası",
+ "countryNameKY": "Cayman Adaları",
+ "countryNameIO": "İngiliz Hint Okyanusu Toprakları",
+ "countryNameRU": "Rusya",
+ "countryNameMA": "Fas",
+ "countryNameAU": "Avustralya",
+ "countryNameBO": "Bolivya",
+ "countryNameVA": "Holy See (Vatikan Kent Devleti)",
+ "countryNameVG": "İngiliz Virgin Adaları",
+ "countryNameFM": "Mikronezya",
+ "countryNameAQ": "Antarktika",
+ "countryNameZM": "Zambiya",
+ "countryNameBR": "Brezilya",
+ "countryNameIS": "İzlanda",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgaristan",
+ "countryNamePR": "Porto Riko",
+ "countryNameGI": "Cebelitarık",
+ "countryNameBS": "Bahamalar",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macau ÖİB",
+ "countryNameRW": "Ruanda",
+ "countryNameAS": "Amerikan Samoası",
+ "countryNameBQ": "Bonaire, Sint Eustatius ve Saba",
+ "countryNameMF": "Saint Martin",
+ "countryNameTM": "Türkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "Yeni Kaledonya",
+ "countryNameAC": "Ascension Adası",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladeş",
+ "countryNameMW": "Malavi",
+ "countryNameGM": "Gambiya",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Kanada",
+ "countryNameSH": "Saint Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Moğolistan",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Kamerun",
+ "countryNameNE": "Nijer",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japonya",
+ "countryNameCY": "Kıbrıs",
+ "countryNameCD": "Demokratik Kongo Cumhuriyeti",
+ "countryNameTN": "Tunus",
+ "countryNameTR": "Türkiye",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "İsveç",
+ "countryNameXK": "Kosova",
+ "countryNameKH": "Kamboçya",
+ "countryNamePL": "Polonya",
+ "countryNameDZ": "Cezayir",
+ "countryNameLR": "Liberya",
+ "countryNameSO": "Somali",
+ "countryNameDM": "Dominika",
+ "countryNameEG": "Mısır",
+ "countryNameGF": "Fransız Guyanası",
+ "countryNameNZ": "Yeni Zelanda",
+ "countryNamePS": "Filistin Yönetimi",
+ "countryNameIL": "İsrail",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Yunanistan",
+ "countryNameNG": "Nijerya",
+ "countryNameMR": "Moritanya",
+ "countryNameVI": "ABD Virgin Adaları",
+ "countryNameGQ": "Ekvator Ginesi",
+ "countryNameMX": "Meksika",
+ "countryNameDJ": "Cibuti",
+ "countryNameGN": "Gine",
+ "countryNameCN": "Çin",
+ "countryNameMZ": "Mozambik",
+ "countryNameBV": "Bouvet Adası",
+ "countryNameNF": "Norfolk Adası",
+ "countryNameTZ": "Tanzanya",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "Güney Georgia ve Güney Sandwich Adaları",
+ "countryNameRS": "Sırbistan",
+ "countryNameCC": "Cocos (Keeling) Adaları",
+ "countryNameNA": "Namibya",
+ "countryNameDE": "Almanya",
+ "countryNameCG": "Kongo Cumhuriyeti",
+ "countryNameKW": "Kuveyt",
+ "countryNameMH": "Marshall Adaları",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarus",
+ "countryNameMY": "Malezya",
+ "countryNameST": "Sao Tome ve Principe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Çad",
+ "countryNameCX": "Christmas Adası",
+ "countryNameIR": "İran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Gine-Bissau",
+ "countryNameUA": "Ukrayna",
+ "countryNameCU": "Küba",
+ "countryNameCO": "Kolombiya",
+ "countryNameNI": "Nikaragua",
+ "countryNameHR": "Hırvatistan",
+ "countryNameSC": "Seyşeller",
+ "countryNameNL": "Hollanda",
+ "countryNameUM": "ABD Küçük Harici Adaları",
+ "countryNameIM": "Man Adası",
+ "countryNameFJ": "Fiji",
+ "countryNameSR": "Surinam",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "Birleşik Krallık",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovenya",
+ "countryNameAM": "Ermenistan",
+ "countryNameAR": "Arjantin",
+ "countryNamePM": "Saint Pierre ve Miquelon",
+ "countryNameTF": "Fransız Güney ve Antarktika Bölgesi",
+ "countryNameDO": "Dominik Cumhuriyeti",
+ "countryNameZW": "Zimbabve",
+ "countryNameMQ": "Martinik",
+ "countryNamePT": "Portekiz",
+ "countryNameCF": "Orta Afrika Cumhuriyeti",
+ "countryNameBE": "Belçika",
+ "countryNameKM": "Komorolar",
+ "countryNameLY": "Libya",
+ "countryNameIE": "İrlanda",
+ "countryNameKP": "Kuzey Kore",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slovakya",
+ "countryNameTC": "Turks ve Caicos Adaları",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Yemen",
+ "countryNameBA": "Bosna-Hersek",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Şili",
+ "countryNameIQ": "Irak",
+ "countryNameSJ": "Svalbard ve Jan Mayen Adaları",
+ "countryNameAX": "Aland Adaları",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Faroe Adaları",
+ "countryNameBL": "Saint Barthélemy",
+ "countryNameLB": "Lübnan",
+ "countryNameJM": "Jamaika",
+ "countryNameAF": "Afganistan",
+ "countryNameES": "İspanya",
+ "countryNameMC": "Monako",
+ "countryNameSG": "Singapur",
+ "countryNameAL": "Arnavutluk",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Esvatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Fildişi Sahili (Côte d’Ivoire)",
+ "countryNameTW": "Tayvan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cook Adaları",
+ "countryNameTH": "Tayland",
+ "countryNameHM": "Heard Adası ve McDonald Adaları",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "Amerika Birleşik Devletleri",
+ "countryNameAT": "Avusturya",
+ "countryNameKR": "Kore Cumhuriyeti",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Danimarka",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Etiyopya",
+ "countryNameMG": "Madagaskar",
+ "countryNameCR": "Kosta Rika",
+ "countryNameLU": "Lüksemburg",
+ "countryNameQA": "Katar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Solomon Adaları",
+ "countryNameAE": "Birleşik Arap Emirlikleri",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua ve Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Macaristan",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "İsviçre",
+ "countryNamePN": "Pitcairn Adaları",
+ "countryNameGL": "Grönland",
+ "countryNamePH": "Filipinler",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts ve Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Letonya",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Yazar",
+ "template": "Şablon adı"
+ },
+ "Row": {
+ "ariaLabel": "sütun {2} satır {0} / {1}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Baştan başlayın ve kullanılabilir envanter özellikleri kitaplığından istediğiniz özellikleri seçin"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Baştan başlayın ve kullanılabilir ayarlar kitaplığından istediğiniz ayarları seçin",
+ "title": "Ayarlar kataloğu"
+ },
+ "Templates": {
+ "subtitle": "Şablonlar, işlevlere göre düzenlenmiş ayar grupları içerir. İlkeleri kendiniz oluşturmak istemiyorsanız veya cihazları WiFi ya da VPN gibi şirket ağlarına erişmek üzere yapılandırmak istiyorsanız şablon kullanın.",
+ "title": "Şablonlar"
+ },
+ "noData": "İlke şablonu bulunamadı"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge uygulaması tarafından önerilen SmartScreen ayarları: Bulut yapılandırması şablonunda Windows 10. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Uç nokta algılama ve yanıt"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "Uygulama ve tarayıcı yalıtımı",
+ "aSRApplicationControl": "Uygulama denetimi",
+ "aSRAttackSurfaceReduction": "Saldırı yüzeyi azaltma kuralları",
+ "aSRDeviceControl": "Cihaz denetimi",
+ "aSRExploitProtection": "Exploit Protection",
+ "aSRWebProtection": "Web koruması (Microsoft Edge'in eski sürümü)",
+ "aVExclusions": "Microsoft Defender Virüsten Koruma dışlamaları",
+ "antivirus": "Microsoft Defender Virüsten Koruma",
+ "cloudPC": "Windows 365 Güvenlik Temeli",
+ "default": "Uç Nokta Güvenliği",
+ "defenderTest": "Uç Nokta için Microsoft Defender tanıtımı",
+ "diskEncryption": "BitLocker",
+ "eDR": "Uç nokta algılama ve yanıt",
+ "edgeSecurityBaseline": "Microsoft Edge temeli",
+ "edgeSecurityBaselinePreview": "Önizleme: Microsoft Edge taban çizgisi",
+ "editionUpgradeConfiguration": "Sürüm yükseltme ve mod değiştirme",
+ "firewall": "Windows Güvenlik Duvarı",
+ "firewallRules": "Windows Güvenlik Duvarı kuralları",
+ "identityProtection": "Hesap koruması",
+ "identityProtectionPreview": "Hesap koruması (önizleme)",
+ "mDMSecurityBaseline1810": "Ekim 2018 için Windows 10 ve üzeri için MDM Güvenlik Temeli",
+ "mDMSecurityBaseline1810Preview": "Önizleme: Ekim 2018 için Windows 10 ve üzeri için MDM Güvenlik Temeli",
+ "mDMSecurityBaseline1810PreviewBeta": "Önizleme: Ekim 2018 için Windows 10 ve üzeri için MDM Güvenlik Temeli (beta)",
+ "mDMSecurityBaseline1906": "Mayıs 2019 için Windows 10 ve üzeri için MDM Güvenlik Temeli",
+ "mDMSecurityBaseline2004": "Ağustos 2020 için Windows 10 ve üzeri için MDM Güvenlik Temeli",
+ "mDMSecurityBaseline2101": "Aralık 2020 Windows 10 ve üstü için MDM Güvenlik Temel Hattı",
+ "macOSAntivirus": "Virüsten koruma",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS güvenlik duvarı",
+ "microsoftDefenderBaseline": "Uç Nokta için Microsoft Defender temeli",
+ "office365Baseline": "Microsoft Office O365 temeli",
+ "office365BaselinePreview": "Önizleme: Microsoft Office O365 temeli",
+ "securityBaselines": "Güvenlik Temelleri",
+ "test": "Test Şablonu",
+ "testFirewallRulesSecurityTemplateName": "Windows Güvenlik Duvarı kuralları (Test)",
+ "testIdentityProtectionSecurityTemplateName": "Hesap koruması (Test)",
+ "windowsSecurityExperience": "Windows Güvenliği deneyimi"
+ },
+ "Firewall": {
+ "mDE": "Windows Güvenlik Duvarı"
+ },
+ "FirewallRules": {
+ "mDE": "Windows Güvenlik Duvarı Kuralları"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "OneDrive Bilinen Klasör Taşıma ayarları: Bulut yapılandırma şablonunda Windows 10. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Hesap Koruması",
+ "administrativeTemplates": "Yönetim Şablonları",
+ "androidCompliancePolicy": "Android uyumluluk ilkesi",
+ "aospDeviceOwnerCompliancePolicy": "Android (AOSP) uyumluluk ilkesi",
+ "applicationControl": "İş için Uygulama Denetimi",
+ "attackSurfaceReductionRules": "Saldırı Yüzeyi Azaltma Kuralları",
+ "bitlocker": "BitLocker",
+ "custom": "Özel",
+ "deliveryOptimization": "Teslim İyileştirme",
+ "derivedPersonalIdentityVerificationCredential": "Türetilmiş kimlik bilgisi",
+ "deviceControl": "Cihaz Denetimi",
+ "deviceFeatures": "Cihaz özellikleri",
+ "deviceFirmwareConfigurationInterface": "Cihaz Üretici Yazılımı Yapılandırma Arabirimi",
+ "deviceLock": "Cihaz Kilidi",
+ "deviceOwner": "Tam olarak yönetilen, ayrılmış ve şirkete ait iş profili",
+ "deviceRestrictions": "Cihaz kısıtlamaları",
+ "deviceRestrictionsWindows10Team": "Cihaz kısıtlamaları (Windows 10 Ekibi)",
+ "domainJoinPreview": "Etki Alanına Katılma",
+ "editionUpgradeAndModeSwitch": "Sürüm yükseltme ve mod değiştirme",
+ "education": "Eğitim",
+ "email": "E-posta",
+ "emailSamsungKnoxOnly": "E-posta (Yalnızca Samsung KNOX)",
+ "endpointProtection": "Uç nokta koruması",
+ "expeditedCheckin": "Mobil cihaz yönetimi yapılandırması",
+ "exploitProtection": "Exploit Protection",
+ "extensions": "Uzantılar",
+ "hardwareConfigurations": "BIOS Yapılandırmaları ve diğer ayarlar profili",
+ "identityProtection": "Kimlik koruması",
+ "iosCompliancePolicy": "iOS uyumluluk ilkesi",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Yerel kullanıcı grubu üyeliği",
+ "macCompliancePolicy": "Mac uyumluluk ilkesi",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Kurumsal Güvenlik Temeli için Microsoft 365 Uygulamaları",
+ "microsoftDefenderAntivirus": "Microsoft Defender Virüsten Koruma",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender Virüsten Koruma dışlamaları",
+ "microsoftDefenderAtpWindows10Desktop": "Uç Nokta için Microsoft Defender (Windows 10 veya sonraki sürümleri çalıştıran masaüstü cihazları)",
+ "microsoftDefenderFirewallRules": "Windows Güvenlik Duvarı Kuralları",
+ "microsoftDefenderforEndpointSecurityBaseline": "Uç Nokta için Microsoft Defender Güvenlik Temel Hattı",
+ "microsoftEdgeBaseline": "Microsoft Edge için Güvenlik Temeli",
+ "mxProfileZebraOnly": "MX profili (yalnızca Zebra)",
+ "networkBoundary": "Ağ sınırı",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Grup İlkesini Geçersiz Kılma",
+ "pkcsCertificate": "PKCS sertifikası",
+ "pkcsImportedCertificate": "PKCS içe aktarılan sertifikası",
+ "preferenceFile": "Tercih dosyası",
+ "presets": "Önayarlar",
+ "scepCertificate": "SCEP sertifikası",
+ "secureAssessmentEducation": "Güvenli değerlendirme (Eğitim)",
+ "securityBaselineForHololens2Advanced": "HoloLens 2 için Gelişmiş Güvenlik Temeli",
+ "securityBaselineForHololens2Standard": "HoloLens 2 için Standart Güvenlik Temeli",
+ "securityBaselineForMicrosoftEdge": "Microsoft Edge için Güvenlik Temeli",
+ "settingsCatalog": "Ayarlar Kataloğu",
+ "sharedMultiUserDevice": "Paylaşılan çok kullanıcılı cihaz",
+ "softwareUpdates": "Yazılım Güncelleştirmeleri",
+ "trustedCertificate": "Güvenilen sertifika",
+ "unknown": "Bilinmeyen",
+ "unsupported": "Desteklenmiyor",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi içeri aktarma",
+ "windows10CompliancePolicy": "Windows 10/11 uyumluluk ilkesi",
+ "windows10MobileCompliancePolicy": "Windows 10 Mobile uyumluluk ilkesi",
+ "windows10XScep": "SCEP sertifikası - TEST",
+ "windows10XTrustedCertificate": "Güvenilen sertifika - TEST",
+ "windows10XVPN": "VPN - TEST",
+ "windows10XWifi": "WIFI - TEST",
+ "windows11SecurityBaseline": "Windows 10 ve sonrası için Güvenlik Temelleri",
+ "windows365SecurityBaseline": "Windows 365 Güvenlik Temeli",
+ "windows8CompliancePolicy": "Windows 8 uyumluluk ilkesi",
+ "windowsHealthMonitoring": "Windows işlevsel durum izleme",
+ "windowsInformationProtection": "Windows Bilgi Koruması",
+ "windowsPhoneCompliancePolicy": "Windows Phone uyumluluk ilkesi",
+ "windowsUpdateforBusiness": "İş İçin Windows Update",
+ "wiredNetwork": "Kablolu ağ",
+ "workProfile": "Kişisel olarak sahip olunan iş profili"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Güncelleştirmeyi kademeli olarak kullanıma sun",
+ "immediateStart": "Güncelleştirmeyi en kısa sürede kullanıma sun",
+ "startDateOnly": "Güncelleştirmeyi belirli bir tarihte kullanıma sun"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Otomatik olarak reddet",
+ "autoGrant": "Otomatik olarak izin ver",
+ "prompt": "Sor"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Konum erişimi (kaba)",
+ "accessFineLocation": "Konum erişimi (ince)",
+ "addVoicemail": "Sesli posta ekle",
+ "bodySensors": "Gövde algılayıcı verilerine izin ver",
+ "bodySensorsBackground": "Arka plan gövdesi algılayıcı verilerine izin ver",
+ "callPhone": "Telefon görüşmesi yap",
+ "camera": "Kamera",
+ "getAccounts": "Hesapları al",
+ "nearbyDevices": "Yakındaki Cihazlar",
+ "nearbyWifiDevices": "Yakındaki Wifi Cihazları",
+ "postNotifications": "Gönderi bildirimleri",
+ "processOutgoingCalls": "Giden aramaları işle",
+ "readCalendar": "Takvim (okuma)",
+ "readCallLog": "Arama günlüğü (okuma)",
+ "readContacts": "Kişiler (okuma)",
+ "readExternalStorage": "Dış depo (okuma)",
+ "readMediaAudio": "Medya Sesi (okuma)",
+ "readMediaImages": "Medya Görüntüleri (okuma)",
+ "readMediaVideo": "Medya Videosu (okuma)",
+ "readPhoneState": "Telefon durumu (okuma)",
+ "readSMS": "SMS (okuma)",
+ "receiveMMS": "MMS (alma)",
+ "receiveSMS": "SMS (alma)",
+ "receiveWAPPush": "WAP push iletileri (alma)",
+ "recordAudio": "Ses kaydetme",
+ "sendSMS": "SMS (gönderme)",
+ "useSIP": "SIP hizmetini kullanma",
+ "writeCalendar": "Takvim (yazma)",
+ "writeCallLog": "Arama günlüğü (yazma)",
+ "writeContacts": "Kişiler (yazma)",
+ "writeExternalStorage": "Dış depo (yazma)"
+ },
+ "RemoveDialog": {
+ "description": "İzinleri kaldırmak istediğinizden emin misiniz?",
+ "title": "Kaldır"
+ },
+ "TableHeader": {
+ "permission": "İzin",
+ "permissionGroup": "İzin grubu",
+ "permissionName": "İzin adı",
+ "permissionState": "İzin durumu"
+ },
+ "addButtonLabel": "+Ekle",
+ "addPermissionTableDescription": "Geçersiz kılmak istediğiniz izinleri belirtin. Bunlar seçilmezse/açıkça belirtilmezse, varsayılan davranış uygulanır.",
+ "addPermissionsTitle": "İzin ekle",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Android çalışma zamanı izinleri hakkında daha fazla bilgi edinin",
+ "permissionTableDescription": "Burada verilen izinler, seçilen uygulamaların \"Varsayılan uygulama izinleri\" ilkesini geçersiz kılar.",
+ "permissionsTitle": "İzinler"
+ },
+ "AssignmentAction": {
+ "exclude": "Dışlandı",
+ "include": "Dahil edilen",
+ "includeAllDevicesVirtualGroup": "Dahil edilen",
+ "includeAllUsersVirtualGroup": "Dahil edilen"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Varsayılan olarak Microsoft Arama",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype Kurumsal",
+ "oneDrive": "OneDrive Masaüstü",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "Seçili gereksinim olarak dosya veya klasör.",
+ "pathToolTip": "Algılanacak dosya veya klasörün tam yolu.",
+ "property": "Özellik",
+ "valueToolTip": "Seçili algılama yöntemiyle eşleşen bir gereksinim değeri seçin. Tarih ve saat gereksinimi yerel biçimde girilmelidir."
+ },
+ "GridColumns": {
+ "pathOrScript": "Yol/Betik",
+ "type": "Tür"
+ },
+ "Registry": {
+ "keyPath": "Anahtar yolu",
+ "keyPathTooltip": "Değeri bir gereksinim olarak içeren kayıt defteri girişinin tam yolu.",
+ "operator": "İşleç",
+ "operatorTooltip": "Karşılaştırma için işleci seçin.",
+ "registryRequirement": "Kayıt defteri anahtarı gereksinimi",
+ "registryRequirementTooltip": "Kayıt defteri anahtarı gereksinim karşılaştırmasını seçin.",
+ "valueName": "Değer adı",
+ "valueNameTooltip": "Gerekli kayıt defteri değerinin adı."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "Dosya",
+ "registry": "Kayıt Defteri",
+ "script": "Betik"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Boolean",
+ "dateTime": "Tarih ve Saat",
+ "float": "Kayan Nokta",
+ "integer": "Tam sayı",
+ "string": "Dize",
+ "version": "Sürüm"
+ },
+ "duplicateName": "{0} betik adı zaten kullanılıyor. Lütfen farklı bir ad girin.",
+ "enforceSignatureCheck": "Betik imzası denetimini zorla",
+ "enforceSignatureCheckTooltip": "Betiğin güvenilen bir yayıncı tarafından imzalandığını doğrulamak için \"Evet\" seçeneğini belirleyin. Bunun yapılması, betiğin uyarı ya da komut istemi görüntülenmeden çalıştırılmasına olanak tanır. Betik engellenmeden çalışır. Betiği imza doğrulaması olmadan, son kullanıcı onayıyla çalıştırmak için \"Hayır\" (varsayılan) seçeneğini belirleyin.",
+ "loggedOnCredentials": "Bu betiği oturum açmış olan kullanıcının kimlik bilgilerini kullanarak çalıştır",
+ "loggedOnCredentialsTooltip": "Betiği oturum açılan cihazın kimlik bilgilerini kullanarak çalıştır.",
+ "operatorTooltip": "Gereksinim karşılaştırması için işleci seçin.",
+ "requirementMethod": "Çıkış veri türünü seçin",
+ "requirementMethodTooltip": "Bir algılama eşleşme gereksinimi belirlenirken kullanılan veri türünü seçin.",
+ "scriptContent": "Betik içeriği",
+ "scriptFile": "Betik dosyası",
+ "scriptFileTooltip": "İstemcide uygulamanın olup olmadığını algılayacak bir PowerShell betiği seçin. Uygulama algılanırsa gereksinim süreci tarafından 0 değerli bir çıkış kodu sağlanır ve STDOUT'a bir dize değeri yazılır.",
+ "scriptName": "Betik adı",
+ "value": "Değer",
+ "valueTooltip": "Seçili algılama yöntemiyle eşleşen bir gereksinim değeri seçin. Tarih ve saat gereksinimi yerel biçimde girilmelidir."
+ },
+ "bladeTitle": "Gereksinim kuralı ekle",
+ "createRequirementHeader": "Bir gereksinim oluşturun.",
+ "header": "Ek gereksinim kuralları yapılandırın",
+ "label": "Ek gereksinim kuralları",
+ "noRequirementsSelectedPlaceholder": "Gereksinim belirtilmedi.",
+ "requirementType": "Gereksinim türü",
+ "requirementTypeTooltip": "Bir gereksiniminin nasıl doğrulanacağının belirlenmesi için kullanılacak algılama yöntemini seçin."
+ },
+ "architectures": "İşletim sistemi mimarisi",
+ "architecturesTooltip": "Uygulamayı yüklemek için gereken mimarileri seçin.",
+ "bladeTitle": "Gereksinimler",
+ "diskSpace": "Gerekli disk alanı (MB)",
+ "diskSpaceTooltip": "Uygulamayı yüklemek için sistem sürücüsünde gereken boş disk alanı.",
+ "header": "Uygulamanın yüklenebilmesi için cihazların karşılaması gereken gereksinimleri belirtin:",
+ "maximumTextFieldValue": "Değer en fazla {0} olabilir.",
+ "minimumCpuSpeed": "Gereken en düşük CPU hızı (MHz)",
+ "minimumCpuSpeedTooltip": "Uygulamayı yüklemek için gereken en düşük CPU hızı.",
+ "minimumLogicalProcessors": "Gereken en düşük mantıksal işlemci sayısı",
+ "minimumLogicalProcessorsTooltip": "Uygulamayı yüklemek için gereken en düşük mantıksal işlemci sayısı.",
+ "minimumOperatingSystem": "Minimum işletim sistemi",
+ "minimumOperatingSystemTooltip": "Uygulamayı yüklemek için gereken en düşük işletim sistemi seçin.",
+ "minumumTextFieldValue": "Değer en az {0} olmalıdır.",
+ "physicalMemory": "Gerekli fiziksel bellek (MB)",
+ "physicalMemoryTooltip": "Uygulamayı yüklemek için gereken fiziksel bellek (RAM).",
+ "selectorLabel": "Gereksinimler",
+ "validNumber": "Lütfen geçerli bir sayı girin."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filtre",
+ "assignmentFilterTypeColumnHeader": "Filtre modu",
+ "assignmentToast": "Son kullanıcı bildirimleri",
+ "assignmentTypeTableHeader": "ATAMA TÜRÜ",
+ "autoUpdate": "Otomatik güncelleştirme",
+ "deadlineTimeColumnLabel": "Yükleme son tarihi",
+ "deliveryOptimizationPriorityHeader": "Teslim iyileştirme önceliği",
+ "groupTableHeader": "Grup",
+ "installContextLabel": "Bağlam Yükleme",
+ "isRemovable": "Çıkarılabilir olarak yükle",
+ "licenseTypeLabel": "Lisans türü",
+ "modeTableHeader": "Grup modu",
+ "policySet": "İlke Kümesi",
+ "preventAutoAppUpdate": "Otomatik uygulama güncelleştirmelerini engelle",
+ "preventManagedAppBackup": "iCloud uygulamasını yedeklemeyi engelle",
+ "restartGracePeriodHeader": "Yeniden başlatma mehil süresi",
+ "startTimeColumnLabel": "Kullanılabilirlik",
+ "tracks": "İzlemeler",
+ "uninstallOnRemoval": "Cihaz kaldırılırken yüklemeyi kaldır",
+ "updateMode": "Güncelleştirme Önceliği",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD web uygulaması",
+ "androidEnterpriseSystemApp": "Android Enterprise sistem uygulaması",
+ "androidForWorkApp": "Yönetilen Google Play Store uygulaması",
+ "androidLobApp": "Android iş kolu uygulaması",
+ "androidStoreApp": "Android mağaza uygulaması",
+ "builtInAndroid": "Yerleşik Android uygulaması",
+ "builtInApp": "Yerleşik uygulama",
+ "builtInIos": "Yerleşik iOS uygulaması",
+ "iosIPadOSWebClip": "iOS/iPadOS web klibi",
+ "iosLobApp": "iOS iş kolu uygulaması",
+ "iosStoreApp": "iOS mağaza uygulaması",
+ "iosVppApp": "iOS Volume Purchase Program uygulaması",
+ "lineOfBusinessApp": "İş kolu uygulaması",
+ "macOSDmgApp": "macOS uygulaması (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS iş kolu uygulaması",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office Suite",
+ "macOSPkgApp": "macOS uygulaması (PKG)",
+ "macOSWebClip": "macOS web klibi",
+ "macOsVppApp": "macOS Volume Purchase Program uygulaması",
+ "managedAndroidLobApp": "Yönetilen Android iş kolu uygulaması",
+ "managedAndroidStoreApp": "Yönetilen Android mağaza uygulaması",
+ "managedGooglePlayApp": "Yönetilen Google Play Store uygulaması",
+ "managedGooglePlayPrivateApp": "Yönetilen Google Play özel uygulaması",
+ "managedGooglePlayWebApp": "Yönetilen Google Play web bağlantısı",
+ "managedIosLobApp": "Yönetilen iOS iş kolu uygulaması",
+ "managedIosStoreApp": "Yönetilen iOS mağaza uygulaması",
+ "microsoftStoreForBusinessApp": "İş İçin Microsoft Store uygulaması",
+ "microsoftStoreForBusinessReleaseManagedApp": "İş İçin Microsoft Store",
+ "officeAddIn": "Office eklentisi",
+ "officeSuiteApp": "Microsoft 365 Uygulamaları (Windows 10 ve üzeri)",
+ "sharePointApp": "SharePoint uygulaması",
+ "teamsApp": "Teams uygulaması",
+ "webApp": "Web bağlantısı",
+ "win32CatalogApp": "Windows katalog uygulaması (Win32)",
+ "winGetPublicApp": "Windows Paket Yöneticisi Topluluk Deposu",
+ "winGetStoreApp": "Microsoft Store uygulaması (yeni)",
+ "windowsAppXLobApp": "Windows AppX iş kolu uygulaması",
+ "windowsClassicApp": "Windows uygulaması (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 ve üzeri)",
+ "windowsMobileMsiLobApp": "Windows MSI iş kolu uygulaması",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX iş kolu uygulaması",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX iş kolu uygulaması",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 mağaza uygulaması",
+ "windowsPhoneXapLobApp": "Windows Phone XAP iş kolu uygulaması",
+ "windowsStoreApp": "Microsoft Store uygulaması (eski)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX iş kolu uygulaması",
+ "windowsUniversalLobApp": "Windows Evrensel iş kolu uygulaması",
+ "windowsWebApp": "Windows web bağlantısı"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Hariç Tutulan",
+ "include": "Dahil edilen",
+ "includeAllDevicesVirtualGroup": "Dahil edilen",
+ "includeAllUsersVirtualGroup": "Dahil edilen"
+ },
+ "AssignmentToast": {
+ "hideAll": "Tüm bildirimleri gizle",
+ "showAll": "Tüm bildirimleri göster",
+ "showReboot": "Bilgisayar yeniden başlatma işlemleri için bildirim göster"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Evet",
+ "notConfigured": "Hayır"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Arka Plan",
+ "displayText": "{0} içinde içerik indirme",
+ "foreground": "Ön plan",
+ "header": "Teslim iyileştirme önceliği"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Uygulama yüklemesi, cihazın yeniden başlatılmasını zorlayabilir",
+ "basedOnReturnCode": "Dönüş kodlarına dayalı davranışı belirle",
+ "force": "Intune zorunlu bir cihaz yeniden başlatma işlemi gerçekleştirecek",
+ "suppress": "Belirli bir eylem yok"
+ },
+ "FilterType": {
+ "exclude": "Dışla",
+ "include": "Ekle",
+ "none": "Yok"
+ },
+ "InstallIntent": {
+ "available": "Kayıtlı cihazlar için bulunur",
+ "availableWithoutEnrollment": "Kayıtlı veya kayıtsız olarak kullanılabilir",
+ "notApplicable": "Geçerli değil",
+ "required": "Gerekli",
+ "uninstall": "Kaldır"
+ },
+ "SettingType": {
+ "assignmentType": "Atama türü",
+ "deviceLicensing": "Lisans türü",
+ "installContext": "Cihaz kaldırılırken yüklemeyi kaldır",
+ "toastSettings": "Son kullanıcı bildirimleri",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Varsayılan",
+ "postponed": "Ertelendi",
+ "priority": "Yüksek Öncelik"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Başarısız",
+ "hardReboot": "Donanımdan önyükleme",
+ "retry": "Yeniden Dene",
+ "softReboot": "Yazılımdan önyükleme",
+ "success": "Başarılı"
+ },
+ "Columns": {
+ "codeType": "Kod türü",
+ "returnCode": "Dönüş kodu"
+ },
+ "bladeTitle": "Dönüş kodları",
+ "gridAriaLabel": "Dönüş kodları",
+ "header": "Yükleme sonrası davranışını göstermek için dönüş kodları belirtin:",
+ "onAddAnnounceMessage": "Dönüş kodu {1} öğeden {0} tanesini ekledi",
+ "onDeleteSuccess": "{0} dönüş kodu başarıyla silindi",
+ "returnCodeAlreadyUsedValidation": "Dönüş kodu zaten kullanılıyor.",
+ "returnCodeMustBeIntegerValidation": "Dönüş kodu tamsayı olmalıdır.",
+ "returnCodeShouldBeAtLeast": "Dönüş kodu en az {0} olmalıdır.",
+ "returnCodeShouldBeAtMost": "Dönüş kodu en çok {0} olmalıdır.",
+ "selectorLabel": "Dönüş kodları"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone ve iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Ağ sınırı ekle",
+ "addNetworkBoundaryButton": "Ağ sınırı ekle...",
+ "allowWindowsSearch": "Şifrelenen kurumsal verilerin ve Mağaza uygulamalarının Windows Search tarafından aranmasına izin ver",
+ "authoritativeIpRanges": "Kurumsal IP Aralıkları listesi yetkilendirildi (otomatik olarak algılama)",
+ "authoritativeProxyServers": "Kurumsal Proxy Sunucular listesi yetkilendirildi (otomatik olarak algılama)",
+ "boundaryType": "Sınır türü",
+ "cloudResources": "Bulut kaynakları",
+ "corporateIdentity": "Kurumsal kimlik",
+ "dataRecoveryCert": "Şifrelenmiş verilerin kurtarılmasını sağlamak için Veri Kurtarma Aracısı (DRA) sertifikasını karşıya yükle",
+ "editNetworkBoundary": "Ağ sınırını düzenle",
+ "enrollmentState": "Kayıt durumu",
+ "iPv4Ranges": "IPv4 aralıkları",
+ "iPv6Ranges": "IPv6 aralıkları",
+ "internalProxyServers": "İç proxy sunucular",
+ "maxInactivityTime": "Cihazın PIN'inin veya parolasının kilitlenmesine neden olan izin verilen en uzun boşta kalma süresi (dakika cinsinden)",
+ "maxPasswordAttempts": "Cihaz silinmeden önce izin verilen kimlik doğrulama hatası sayısı",
+ "mdmDiscoveryUrl": "MDM bulma URL'si",
+ "mdmRequiredSettingsInfo": "Bu ilke yalnızca Windows 10 Yıldönümü Sürümü ve üzeri için geçerlidir. Bu ilke, korumayı uygulamak için Windows Bilgi Koruması (WIP) kullanır.",
+ "minimumPinLength": "PIN için gerekli en az karakter sayısını ayarla",
+ "name": "Ad",
+ "networkBoundariesGridEmptyText": "Eklediğiniz ağ sınırları burada gösterilir",
+ "networkBoundary": "Ağ sınırı",
+ "networkDomainNames": "Ağ etki alanları",
+ "neutralResources": "Bağımsız kaynaklar",
+ "passportForWork": "Windows'ta oturum açma yöntemi olarak İş İçin Windows Hello kullan",
+ "pinExpiration": "Sistem kullanıcıdan değiştirmesini isteyene kadar PIN'in kullanılabileceği süreyi belirtin (gün olarak)",
+ "pinHistory": "Tekrar kullanılamayan bir kullanıcı hesabı ile ilişkili eski PIN'lerin sayısını belirtin",
+ "pinLowercaseLetters": "İş İçin Windows Hello PIN'inde küçük harf kullanımını yapılandır",
+ "pinSpecialCharacters": "İş İçin Windows Hello PIN'inde özel karakter kullanımını yapılandır",
+ "pinUppercaseLetters": "İş İçin Windows Hello PIN'inde büyük harf kullanımını yapılandır",
+ "protectUnderLock": "Cihaz kilitliyken uygulamaların kurumsal verilere erişmesini engelleyin. Yalnızca Windows 10 Mobile için geçerlidir",
+ "protectedDomainNames": "Korunan etki alanları",
+ "proxyServers": "Proxy sunucuları",
+ "requireAppPin": "Cihaz PIN'i yönetildiğinde uygulama PIN'ini devre dışı bırakma",
+ "requiredSettings": "Gerekli ayarlar",
+ "requiredSettingsInfo": "Kapsamı değiştirmek veya bu ilkeyi kaldırmak kurumsal verilerin şifresini çözer.",
+ "revokeOnMdmHandoff": "Cihaz MDM'ye kaydedildiğinde korumalı verilere erişimi iptal edin",
+ "revokeOnUnenroll": "Kayıt kaldırılırken şifreleme anahtarlarını iptal et",
+ "rmsTemplateForEdp": "Azure RMS için kullanılacak şablon kimliğini belirt",
+ "showWipIcon": "Kurumsal verileri koruma simgesini göster",
+ "type": "Tür",
+ "useRmsForWip": "WIP için Azure RMS kullan",
+ "value": "Değer",
+ "weRequiredSettingsInfo": "Bu ilke yalnızca Windows 10 Creators Update ve üzeri için geçerlidir. Bu ilke, korumayı uygulamak için Windows Bilgi Koruması (WIP) ve Windows MAM kullanır.",
+ "wipProtectionMode": "Windows Bilgi Koruması modu",
+ "withEnrollment": "Kayıt ile",
+ "withoutEnrollment": "Kayıt olmadan"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arapça",
+ "bulgarian": "Bulgarca",
+ "chineseSimplified": "Çince (Basitleştirilmiş)",
+ "chineseTraditional": "Çince (Geleneksel)",
+ "croatian": "Hırvatça",
+ "czech": "Çekçe",
+ "danish": "Danca",
+ "dutch": "Felemenkçe",
+ "englishUK": "İngilizce (Birleşik Krallık)",
+ "englishUS": "İngilizce (Birleşik Devletler)",
+ "estonian": "Estonca",
+ "finnish": "Fince",
+ "frenchCanada": "Fransızca (Kanada)",
+ "frenchFrance": "Fransızca (Fransa)",
+ "german": "Almanca",
+ "greek": "Yunanca",
+ "hebrew": "İbranice",
+ "hungarian": "Macarca",
+ "italian": "İtalyanca",
+ "japanese": "Japonca",
+ "korean": "Korece",
+ "latvian": "Letonca",
+ "lithuanian": "Litvanca",
+ "norwegian": "Norveççe Bokmål",
+ "polish": "Lehçe",
+ "portugueseBrazil": "Portekizce (Brezilya)",
+ "portuguesePortugal": "Portekizce (Portekiz)",
+ "romanian": "Romence",
+ "russian": "Rusça",
+ "serbian": "Sırpça",
+ "slovak": "Slovakça",
+ "slovenian": "Slovence",
+ "spanishMexico": "İspanyolca (Meksika)",
+ "spanishSpain": "İspanyolca (İspanya)",
+ "swedish": "İsveççe",
+ "thai": "Tayland",
+ "turkish": "Türkçe",
+ "ukrainian": "Ukraynaca"
+ },
+ "Summary": {
+ "placeholder": "Sol taraftaki önizleme içeriğinden bir bildirim iletisi seçin."
+ },
+ "companyContact": "İletişim bilgilerini göster",
+ "companyLogo": "Şirket logosunu göster",
+ "companyName": "Şirket adını göster",
+ "createEditDescription": "Bildirim iletisi şablonları oluşturun veya düzenleyin.",
+ "createMessage": "İleti oluştur",
+ "deviceDetails": "Cihaz ayrıntılarını göster",
+ "deviceDetailsInfoBox": "Cihaz ayrıntılarını almak e-posta bildirimlerini almada gecikmeye neden olduğundan bu ayar varsayılan olarak kapalıdır.",
+ "editImpactInfo": "Bu bildirim iletisi şablonunu düzenlemek, bu şablonu kullanan tüm ilkeleri etkiler.",
+ "editMessage": "İletiyi düzenle",
+ "email": "e-posta",
+ "emailFooterTitle": "E-posta Alt Bilgisi",
+ "emailHeaderFooterInfo": "E-posta bildirimleri için e-posta üst bilgi ve alt bilgi ayarları, Uç Nokta yöneticisinde bulunan Kiracı yönetici düğümündeki Özelleştirme ayarlarına bağlıdır.",
+ "emailHeaderTitle": "Posta Üst Bilgisi",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Özelleştirme ayarlarını yapılandırın",
+ "formSubTitle": "Bildirim e-postaları oluşturma veya düzenleme",
+ "headerFooterSettingsTab": "Üst bilgi ve alt bilgi ayarları",
+ "imgPreview": "Görüntü Önizleme",
+ "infotext": "Bir bildirim iletisi seçin. Yeni bir bildirim oluşturmak için lütfen Cihaz Uyumluluğunu Ayarla iş yükünün Yönetim bölümündeki Bildirim'e gidin.",
+ "iwLink": "Şirket portalı web sitesi bağlantısını göster",
+ "listEmpty": "İleti şablonu yok.",
+ "listEmptySelectOnly": "İleti şablonu yok. Yeni bir bildirim oluşturmak için, lütfen Cihaz Uyumluluğu Ayarla iş yükünün Yönet bölümündeki Bildirimler bölümünü ziyaret edin.",
+ "listSubTitle": "Bildirim iletisi şablonları listesi",
+ "listTitle": "Bildirim iletisi şablonları",
+ "localizedNotificationMessageTemplates": "Yerelleştirilmiş bildirim iletisi şablonları",
+ "messageAssigned": "Bu ileti şablonu, şu anda bir veya daha çok uyumluluk ilkesi tarafından kullanıldığından silinemiyor.",
+ "messageCapitalized": "Bildirim iletisi şablonu",
+ "messageLowercase": "bildirim iletisi şablonu",
+ "missingDefaultError": "Varsayılan bir şablon seçin",
+ "notificationMessageTemplates": "Bildirim iletisi şablonları",
+ "rowValidationError": "En az bir ileti şablonu gerekiyor",
+ "selectDescription": "Bir bildirim iletisi seçin. Yeni bir bildirim oluşturmak için, lütfen Cihaz Uyumluluğunu Ayarla iş yükünün Yönetim bölümündeki Bildirimler'e gidin.",
+ "tenantValueText": "Kiracı Değeri",
+ "testEmailLabel": "Önizleme e-postası gönder",
+ "localeLabel": "Yerel ayar",
+ "isDefaultLocale": "Varsayılan Değer"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Cihazları ilk sağlama için yapılandırın.",
+ "title": "Cihaz hazırlama"
+ },
+ "EnrollmentSettings": {
+ "description": "Kaydı engelleme ve kullanıcılara atama gibi kayıt ayarlarını yapılandırın.",
+ "title": "Kayıt ayarları"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Kullanıcıların Windows'u önyüklenebilir bir flash sürücüden kurtarmak için kullanabileceği ayarları yapılandırın.",
+ "menuTitle": "Windows işletim sistemi kurtarma yapılandırması"
+ },
+ "coManagementAuthorityDesc": "Configuration Manager tümleştirmesi için ortak yönetim ayarlarını yapılandırın",
+ "coManagementAuthorityTitle": "Ortak yönetim ayarları ",
+ "deploymentProfiles": "Windows Autopilot dağıtım profilleri",
+ "description": "Bir Windows 10/11 bilgisayarının kullanıcılar veya yöneticiler tarafından Intune'a kaydedilmesinin yedi farklı yolu hakkında bilgi edinin.",
+ "descriptionLabel": "Windows kayıt yöntemleri",
+ "enrollmentStatusPage": "Kayıt Durumu Sayfası"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Anahtarda bulunan bit sayısını seçin.",
+ "keyUsage": "Sertifikanın ortak anahtarını değiştirmek için gereken şifreleme eylemini belirtin.",
+ "renewalThreshold": "Cihazın sertifika yenilemesi isteyebilmesi için izin verilen en yüksek kalan sertifika ömrü yüzdesini (yüzde 1 ila 99) girin. Intune'da tavsiye edilen miktar %20'dir (1-99).",
+ "rootCert": "Önceden yapılandırılmış ve atanmış bir kök CA sertifikası profili seçin. CA sertifikası, bu profil (şu anda yapılandırdığınız) için sertifikayı veren CA'nın kök sertifikası ile eşleşmelidir.",
+ "scepServerUrl": "SCEP aracılığıyla sertifika veren NDES Sunucusu için bir URL girin (HTTPS olmalıdır). Örneğin https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "SCEP aracılığıyla sertifika veren NDES Sunucusu için bir veya daha fazla URL ekleyin (HTTPS olmalıdır). Örneğin https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Konu diğer adı",
+ "subjectNameFormat": "Konu adı biçimi",
+ "validityPeriod": "Sertifikanın süresinin dolmasına kalan süre miktarı. Sertifika şablonunda gösterilen geçerlilik süresine eşit veya bundan daha düşük bir değer girin. Varsayılan olarak bir yıl ayarlanır."
+ },
+ "appInstallContext": "Bu uygulamayla ilişkilendirilecek yükleme bağlamını belirtir. İkili mod uygulamaları için bu uygulama için istenen bağlamı seçin. Bu seçenek, diğer tüm uygulamalar için pakete göre önceden belirlenir ve değiştirilemez.",
+ "autoUpdateMode": "Uygulamanın güncelleştirme önceliğini yapılandırın. Uygulamayı güncelleştirmeden önce cihazın WiFi'ya bağlı, şarj ediliyor ve etkin olarak kullanımda olmamasını zorunlu kılmak için Varsayılan'ı seçin. Uygulamayı, geliştirici yayımladıktan hemen sonra; şarj durumuna, WiFi özelliğine veya cihazdaki son kullanıcı etkinliğine bakılmaksızın güncelleştirmek için Yüksek Öncelik'i seçin. Uygulama güncelleştirmelerini en fazla 90 güne kadar ötelemek için Ertelendi’yi seçin. Yüksek öncelik ve ertelendi yalnızca DO cihazlarında etkinleştirilir.",
+ "configurationSettingsFormat": "Yapılandırma ayarları biçim metni",
+ "ignoreVersionDetection": "Bunu, uygulama geliştiricisinin otomatik güncelleştirdiği uygulamalar (örneğin Google Chrome) için “Evet” olarak ayarlayın.",
+ "ignoreVersionDetectionMacOSLobApp": "Uygulama geliştiricisi tarafından otomatik olarak güncelleştirilen uygulamalar veya yüklemeden önce yalnızca uygulama paketi kimliğini denetlemek için \"Evet\" seçeneğini belirleyin. Yüklemeden önce uygulama paketi kimliğini ve sürüm numarasını denetlemek için \"Hayır\" seçeneğini belirleyin.",
+ "installAsManagedMacOSLobApp": "Bu ayar yalnızca macOS 11 ve üzeri için geçerlidir. Uygulama yüklenecek ancak macOS 10.15 ve önceki sürümlerde yönetilmeyecek.",
+ "installContextDropdown": "Uygun yükleme bağlamını seçin. Cihaz bağlamı uygulamayı cihaza tüm kullanıcılar için yüklerken, kullanıcı bağlamı uygulamayı yalnızca hedeflenen kullanıcı için yükler.",
+ "ldapUrl": "Bu, istemcilerin e-posta alıcıları için genel şifreleme anahtarlarını alabileceği LDAP ana bilgisayar adıdır. Anahtar kullanılabilir olduğunda e-postalar şifrelenir. Desteklenen biçimler:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "İlişkili uygulama için çalışma zamanı izinlerini seçin.",
+ "policyAssociatedApp": "Bu ilkenin ilişkilendirileceği uygulamayı seçin.",
+ "policyConfigurationSettings": "Bu ilke için yapılandırma ayarlarını tanımlarken kullanmak istediğiniz yöntemi seçin.",
+ "policyDescription": "İsteğe bağlı olarak, bu yapılandırma ilkesi için bir açıklama girebilirsiniz.",
+ "policyEnrollmentType": "Bu ayarların cihaz yönetimi üzerinden mi yoksa Intune SDK'sı ile oluşturulan uygulamalar ile mi yönetileceğini seçin.",
+ "policyName": "Bu yapılandırma ilkesi için bir ad girin.",
+ "policyPlatform": "Bu uygulama yapılandırma ilkesinin geçerli olacağı platformu seçin.",
+ "policyProfileType": "Bu uygulama yapılandırma profilinin uygulanacağı cihaz profili türlerini seçin",
+ "policySMime": "Outlook S/MIME imzalama ve şifreleme ayarlarını yapılandırın.",
+ "sMimeDeployCertsFromIntune": "Intune'dan Outlook ile kullanılmak üzere S/MIME sertifikaları dağıtılıp dağıtılmayacağını belirtin.\r\nIntune tüm imzalama ve şifreleme sertifikalarını Şirket Portalı aracılığıyla kullanıcılara dağıtır.",
+ "sMimeEnable": "E-posta oluştururken S/MIME denetimlerinin etkin olup olmayacağını belirtin",
+ "sMimeEnableAllowChange": "Kullanıcının, S/MIME etkinleştir ayarını değiştirmesine izin verilip verilmediğini belirtin.",
+ "sMimeEncryptAllEmails": "Tüm e-postaların şifrelenip şifrelenmeyeceğini belirtin.\r\nŞifreleme, verileri şifre metnine dönüştürdüğünden metni yalnızca hedeflenen alıcı okuyabilir.",
+ "sMimeEncryptAllEmailsAllowChange": "Kullanıcının, Tüm e-postaları şifrele ayarını değiştirmesine izin verilip verilmediğini belirtin.",
+ "sMimeEncryptionCertProfile": "E-posta şifrelemesi için sertifika profilini belirtin.",
+ "sMimeSignAllEmails": "Tüm e-postaların imzalanıp imzalanmayacağını belirtin.\r\nDijital imza, e-postanın gerçek olduğunu doğrular ve aktarım sırasında içerikle oynanmamasını sağlar.",
+ "sMimeSignAllEmailsAllowChange": "Kullanıcının, Tüm e-postaları imzala ayarını değiştirmesine izin verilip verilmediğini belirtin.",
+ "sMimeSigningCertProfile": "E-posta imzalaması için sertifika profilini belirtin.",
+ "sMimeUserNotificationType": "Kullanıcıları Outlook için S/MIME sertifikalarını almak üzere Şirket Portalı'nı açmaları gerektiği konusunda bilgilendirme yöntemi."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} bir veya daha fazla ilke kümesine eklenmiş. {0} öğesini silerseniz, bu öğeyi artık bu ilke kümeleri aracılığıyla atayamazsınız. Yine de silinsin mi?",
+ "contentWithError": "{0} bir veya daha fazla ilke kümesine eklenmiş olabilir. {0} öğesini silerseniz, bu öğeyi artık bu ilke kümeleri aracılığıyla atayamazsınız. Yine de silinsin mi?",
+ "header": "Bu kısıtlamayı silmek istediğinizden emin misiniz?"
+ },
+ "DeviceLimit": {
+ "description": "Bir kullanıcının kaydedebileceği en fazla cihaz sayısını belirtin.",
+ "header": "Cihaz sınırı kısıtlamaları",
+ "info": "Her kullanıcının kaç cihaz kaydedebileceğini tanımlayın."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "1.0 veya üzeri olmalıdır.",
+ "android": "Geçerli bir sürüm numarası girin. Örnekler: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Geçerli bir sürüm numarası girin. Örnekler: 5.0, 5.1.1",
+ "iOS": "Geçerli bir sürüm numarası girin. Örnekler: 9.0, 10.0, 9.0.2",
+ "mac": "Geçerli bir sürüm numarası girin. Örnekler: 10, 10.10, 10.10.1",
+ "min": "En düşük değer {0} değerinden düşük olamaz",
+ "minMax": "En düşük sürüm, en yüksek sürümden büyük olamaz.",
+ "windows": "10.0 veya üzeri olmalıdır. 8.1 cihazlara izin vermek için boş bırakın",
+ "windowsMobile": "10.0 veya üzeri olmalıdır. 8.1 cihazlara izin vermek için boş bırakın"
+ },
+ "allPlatformsBlocked": "Tüm cihaz platformları engellendi. Platform yapılandırmasını etkinleştirmek için platform kaydına izin verin.",
+ "blockManufacturerPlaceHolder": "Üretici adı",
+ "blockManufacturersHeader": "Engellenen üreticiler",
+ "cannotRestrict": "Kısıtlama desteklenmiyor",
+ "configurationDescription": "Bir cihazın kaydedilmesi için karşılanması gereken platform yapılandırma kısıtlamalarını belirtin. Kayıt sonrasında cihazları kısıtlamak için uyumluluk ilkelerini kullanın. ana.ikincil.derleme gibi sürümler tanımlayın. Sürüm kısıtlamaları yalnızca Şirket Portalı ile kaydedilen cihazlara uygulanır. Intune, cihazları varsayılan olarak kişiye ait olarak sınıflandırır. Cihazların şirkete ait olarak sınıflandırılması için ek eylem gerekir.",
+ "configurationDescriptionLabel": "Kayıt kısıtlamalarını ayarlama hakkında daha fazla bilgi edinin",
+ "configurations": "Platformları yapılandırma",
+ "deviceManufacturer": "Cihaz üreticisi",
+ "header": "Cihaz türü kısıtlamaları",
+ "info": "Hangi platformların, sürümlerin ve yönetim türlerinin kayıt olabileceğini tanımlayın.",
+ "manufacturer": "Üretici",
+ "max": "En Fazla",
+ "maxVersion": "En yüksek sürüm",
+ "min": "En Küçük",
+ "minVersion": "En düşük sürüm",
+ "newPlatforms": "Yeni platformlara izin verdiniz. Platform Yapılandırmalarını güncelleştirmeniz önerilir.",
+ "personal": "Kişiye ait",
+ "platform": "Platform",
+ "platformDescription": "Aşağıdaki platformların kaydedilmesine izin verebilirsiniz. Yalnızca desteklemediğiniz platformları engelleyin. İzin verilen platformlar ek kayıt kısıtlamalarıyla yapılandırılabilir.",
+ "platformSettings": "Platform ayarları",
+ "platforms": "Platform seçin",
+ "platformsSelected": "{0} platform seçildi",
+ "type": "Tür",
+ "versions": "sürümler",
+ "versionsRange": "En düşük/en yüksek aralığına izin ver:",
+ "windowsTooltip": "Mobil Cihaz Yönetimi aracılığıyla kaydı kısıtlar. PC aracısının yüklenmesini kısıtlamaz. Yalnızca Windows 10 ve Windows 11 sürümleri desteklenir. Windows 8.1'e izin vermek için sürümleri boş bırakın."
+ },
+ "Priority": {
+ "saved": "Kısıtlama Öncelikleri başarıyla kaydedildi."
+ },
+ "Row": {
+ "announce": "Öncelik: {0}, Ad: {1}, Atanan: {2}"
+ },
+ "Table": {
+ "deployed": "Dağıtıldı",
+ "name": "Ad",
+ "priority": "Öncelik"
+ },
+ "Type": {
+ "limit": "Cihaz sınırı kısıtlaması",
+ "type": "Cihaz türü kısıtlaması"
+ },
+ "allUsers": "Tüm Kullanıcılar",
+ "androidRestrictions": "Android kısıtlamaları",
+ "create": "Kısıtlama oluştur",
+ "defaultLimitDescription": "Bu, grup üyeliğinden bağımsız olarak tüm kullanıcılara en düşük öncelikte uygulanan varsayılan Cihaz Sınırı Kısıtlamasıdır.",
+ "defaultTypeDescription": "Bu, grup üyeliğinden bağımsız olarak tüm kullanıcılara en düşük öncelikte uygulanan varsayılan Cihaz Türü Kısıtlamasıdır.",
+ "defaultWhfbDescription": "Bu, grup üyeliğinden bağımsız olarak tüm kullanıcılara en düşük öncelikte uygulanan varsayılan İş İçin Windows Hello yapılandırmasıdır.",
+ "deleteMessage": "Etkilenen kullanıcılara, atanan bir sonraki en yüksek öncelik kısıtlaması veya başka bir kısıtlama atanmamışsa varsayılan kısıtlama uygulanacaktır.",
+ "deleteTitle": "{0} kısıtlamasını silmek istediğinizden emin misiniz?",
+ "descriptionHint": "Kısıtlama ayarları tarafından belirlenen iş kullanımını veya kısıtlama düzeyini açıklayan kısa bir paragraf.",
+ "edit": "Kısıtlamayı düzenle",
+ "info": "Bir cihaz, kullanıcısına atanan en yüksek öncelikli kayıt kısıtlamalarıyla uyumlu olmalıdır. Bir cihaz kısıtlamasını sürükleyerek önceliğini değiştirebilirsiniz. Varsayılan kısıtlamalar tüm kullanıcılar için en düşük önceliktedir ve kullanıcısız kayıtları yönetir. Varsayılan kısıtlamalar düzenlenebilir, ancak silinemez.",
+ "iosRestrictions": "iOS kısıtlamaları",
+ "mDM": "MDM",
+ "macRestrictions": "macOS kısıtlamaları",
+ "maxVersion": "En Yüksek Sürüm",
+ "minVersion": "En Düşük Sürüm",
+ "nameHint": "Bu, kısıtlama kümesini tanımlamak üzere görünür olan birincil öznitelik olacaktır.",
+ "noAssignmentsStatusBar": "Kısıtlamayı en az bir gruba atayın. Özellikler'e tıklayın.",
+ "nonAdminForbiddenCreateError": "Kısıtlamalar oluşturmak, kısıtlamaları düzenlemek veya silmek için Intune Hizmet Yöneticisi veya Genel Yönetici olmanız gerekir.",
+ "nonAdminForbiddenEdit": "Kısıtlamaları düzenlemek için yönetici olmanız gerekiyor.",
+ "notFound": "Kısıtlama bulunamadı. Silinmiş olabilir.",
+ "personallyOwned": "Kişilere ait cihazlar",
+ "restriction": "Kısıtlama",
+ "restrictionLowerCase": "kısıtlama",
+ "restrictionType": "Kısıtlama türü",
+ "selectType": "Kısıtlama türünü seçin",
+ "selectValidation": "Lütfen bir platform seçin",
+ "typeHint": "Cihaz özelliklerini kısıtlamak için Cihaz Türü Kısıtlamasını seçin. Kullanıcı başına cihaz sayısını kısıtlamak için Cihaz Sınırı Kısıtlamasını seçin.",
+ "typeRequired": "Kısıtlama türü gereklidir.",
+ "winPhoneRestrictions": "Windows Phone kısıtlamaları",
+ "windowsECv1Info": "Eski kayıt kısıtlamaları düzenlenemez veya yeniden önceliklendirilemez, yalnızca silinebilir.",
+ "windowsECv2Info": "Kayıt kısıtlamalarını sürükleyip bırakarak önceliklerini belirtebilirsiniz. Varsayılan ve önceden yapılandırılmış kısıtlamaları aşağıda görüntüleyin. Tüm yeni kayıt kısıtlamaları, varsayılan ve önceden yapılandırılmış kısıtlamalardan daha yüksek önceliğe sahip olacaktır.",
+ "windowsRestrictions": "Windows kısıtlamaları",
+ "windowsRestrictionsPreview": "Filtre tabanlı Windows kısıtlamaları (önizleme)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 gün",
+ "twoDays": "2 gün",
+ "zeroDays": "0 gün"
+ },
+ "SecurityTemplate": {
+ "aSR": "Saldırı yüzeyini azaltma",
+ "accountProtection": "Hesap koruması",
+ "allDevices": "Tüm cihazlar",
+ "antivirus": "Virüsten Koruma",
+ "antivirusReporting": "Virüsten Koruma Raporlaması (Önizleme)",
+ "conditionalAccess": "Koşullu erişim",
+ "deviceCompliance": "Cihaz uyumluluğu",
+ "diskEncryption": "Disk şifrelemesi",
+ "eDR": "Uç nokta algılama ve yanıt",
+ "ePM": "Uç Nokta Ayrıcalık Yönetimi",
+ "firewall": "Güvenlik duvarı",
+ "helpSupport": "Yardım ve destek",
+ "setup": "Kur",
+ "wdapt": "Uç Nokta için Microsoft Defender"
+ },
+ "OutlookAppConfig": {
+ "DataProtectionConfiguration": {
+ "header": "Veri Koruması yapılandırması"
+ },
+ "OrganizeMailByThread": {
+ "title": "Postaları yazışmaya göre düzenleme",
+ "tooltip": "Outlook varsayılan olarak, posta konuşmalarını yazışmalardan oluşan bir görüşme görünümünde toplar. Bu ayar devre dışı bırakılırsa Outlook her bir postayı ayrı ayrı görüntüler ve bunları yazışmaya göre gruplandırmaz."
+ },
+ "Sync": {
+ "header": "Kişi alanlarını yerel kişiler uygulaması yapılandırmasıyla eşitle"
+ },
+ "allowBiometricsAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
+ "allowBiometricsTitle": "Uygulamaya Erişmek için Biyometriyi Gerekli Kıl",
+ "allowBiometricsTooltip": "Kullanıcıların cihazlarında uygulamaya erişmeleri için TouchID veya FaceID gibi biyometrik bilgiler gerekebilir. Bu bilgiler gerekli kılındığında, bu profilde seçilen kimlik doğrulaması yöntemine ek olarak kullanılır. Uygulama koruma ilkesi yönetilen verilere erişim öncesinde erişim gereksinimleri içerdiğinden bu ayar, Intune Uygulama Koruma İlkeleri dağıtıldığında etkinleştirilmemelidir. Her ikisinin de etkinleştirilmesi, Outlook mobile erişim için birden fazla erişim isteğiyle sonuçlanır. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
+ "allowCalendarNotificationsAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
+ "allowCalendarNotificationsTitle": "Takvim Bildirimleri",
+ "allowCalendarNotificationsTooltip": "\"Kuruluş verileri bildirimleri\" Uygulama Koruma İlkesi ayarı \"Kuruluş Verilerini Engelle\" olarak ayarlandığında takvim bildirimlerinin tam ayrıntıları görüntülemesine izin ver.",
+ "allowDefaultAppSignatureTitle": "Varsayılan Uygulama İmzası",
+ "allowDefaultAppSignatureTooltip": "Varsayılan uygulama imzası, uygulamanın ileti oluşturma sırasında varsayılan imza olarak “iOS için Outlook'u edinin” imzasını kullanıp kullanmayacağını belirtir. Ayar Kapalı olarak yapılandırıldıysa varsayılan imza kullanılmaz, ancak kullanıcılar kendi imzalarını ekleyebilir. Yapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak ayarlanır.",
+ "allowExternalRecipientsMailTipTitle": "Dış Alıcılar Posta İpucu",
+ "allowExternalRecipientsMailTipTooltip": "Dış Alıcılar Posta İpucu, gönderenin bir dış alıcı veya dış alıcı içeren bir dağıtım grubu eklemesi durumunda görüntülenir. Bu Posta İpucu, gönderenleri oluşturdukları iletinin kuruluş dışına çıkıp çıkmayacağı konusunda bilgilendirerek sözcük seçimi, üslup ve içerik konusunda doğru kararlar alınmasına yardımcı olur. Yalnızca hibrit modern kimlik doğrulamasından yararlanan Exchange Online hesapları ve şirket hesapları için kullanılabilir. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık'tır.",
+ "allowFocusedInboxTitle": "Odaklanmış Gelen Kutusu",
+ "allowFocusedInboxTooltip": "Odaklanmış Gelen Kutusu, gelen kutunuzu iki sekmeye ayırır: Odaklanmış ve Diğer. En önemli e-postalarınız Odaklanmış sekmesindeyken diğerleri kolayca ulaşılabilir ancak gözden uzak bir yerde, Diğer sekmesinde durur. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
+ "allowMailNotificationsAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
+ "allowMailNotificationsTitle": "Posta Bildirimleri",
+ "allowMailNotificationsTooltip": "Bu değer, Outlook'un e-posta bildirimlerine izin verip vermeyeceğini belirtir. Değerin Hayır olarak ayarlanması, e-posta bildirimlerini devre dışı bırakır.",
+ "allowOrgDataOnWearablesTitle": "Giyilebilir Cihazlarda Kuruluş Verileri",
+ "allowOrgDataOnWearablesTooltip": "Bu değer, Outlook'un giyilebilir bir cihazla eşitlenip eşitlenemeyeceğini belirtir. Değerin Hayır olarak ayarlanması, giyilebilir cihaz eşitlemesini devre dışı bırakır.",
+ "allowSaveContactsAllowUserChangeTooltip": "Kullanıcının kişi eşitleme ayarını değiştirmesine izin verilip verilmediğini belirtin.",
+ "allowSaveContactsTitle": "Kişileri Kaydet",
+ "allowSaveContactsTooltip": "Mobil cihazın yerel adres defterine kişi kaydetmek, yeni aramaların ve kısa mesajların kullanıcının mevcut Outlook kişilerine bağlanmasını sağlar. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
+ "allowSmartReplyAndroidAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
+ "allowSmartReplyTitle": "Önerilen Yanıtlar",
+ "allowSmartReplyTooltip": "Bir iletiyi açtığınızda, Outlook iletinin altında yanıtlar önerebilir. Önerilen bir yanıtı seçerseniz, göndermeden önce yanıtı düzenleyebilirsiniz. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık'tır.",
+ "allowUserChangeGeneralToolTip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
+ "allowUserChangeTitle": "Kullanıcının ayar değiştirmesine izin ver",
+ "blockExternalImagesAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
+ "blockExternalImagesTitle": "Harici Görüntüleri Engelle",
+ "blockExternalImagesTooltip": "Harici görüntüleri engelleme özelliği etkinleştirildiğinde uygulama İnternet'te barındırılan ve ileti gövdesine ekli görüntülerin indirilmesini engeller. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
+ "disableAddinsTitle": "Eklentilere İzin Ver",
+ "disableAddinsTooltip": "Varsayılan olarak bir Uygulama Koruma İlkesi, kullanıcıların üçüncü taraf eklentileri kullanmasına izin verir, ancak \"İlke tarafından yönetilen uygulama verilerini yerel uygulamalarla veya eklentilerle eşitleme\" ayarıyla eklentileri engellemek için kullanılabilir. Bu ayarın \"Kapalı\" olarak yapılandırılması, Uygulama Koruma İlkesi ayarı İzin Verildi olarak ayarlandığında eklentileri engeller.",
+ "discoverFeedTitle": "Keşif Akışı",
+ "discoverFeedTooltip": "Keşif Akışı, en sık erişilen Office dosyalarınızı öne çıkarır. Kullanıcı için Delve etkinleştirildiğinde, bu akış da varsayılan olarak etkinleştirilir. Yapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak belirlenir.",
+ "enableSMIMETitle": "S/MIME'yi etkinleştir",
+ "enableSMIMETooltip": "E-posta oluştururken S/MIME denetimlerinin etkin olup olmayacağını belirtin.",
+ "encryptAllEmails": "Tüm e-postaları şifrele",
+ "encryptAllEmailsAllowUserChangeTooltip": "Kullanıcının, Tüm e-postaları şifrele ayarını değiştirmesine izin verilip verilmediğini belirtin.",
+ "encryptAllEmailsTooltip": "Tüm e-postaların şifrelenip şifrelenmeyeceğini belirtin. Şifreleme, verileri şifre metnine dönüştürdüğünden metni yalnızca hedeflenen alıcı okuyabilir.",
+ "ldapUrl": "LDAP URL'si",
+ "ldapUrlTooltip": "Bu, istemcilerin e-posta alıcıları için genel şifreleme anahtarlarını alabileceği LDAP ana bilgisayar adıdır. Anahtar kullanılabilir olduğunda e-postalar şifrelenir. Desteklenen biçimler:\r\n
\r\n
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
\r\n
ldap://ldap.example.com:123
\r\n
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
\r\n
",
+ "nativeCalendarSyncAllowUserChangeTooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin.",
+ "nativeCalendarSyncMAMOnlyTitle": "Takvim Eşitlemesine İzin Ver",
+ "nativeCalendarSyncMAMOnlyTooltip": "Varsayılan olarak Uygulama Koruma İlkesi, yerel Takvim uygulamasıyla takvim eşitlemesine izin verir ancak Takvim eşitlemesi kullanılabilirliğini engellemek için kullanılabilir. Bu ayar, Uygulama Koruma İlkesi ayarından bağımsız olarak çalışır ve kuruluşların iş veya okul hesabı için takvim eşitlemesinin kullanılıp kullanılamayacağını belirlemesine olanak tanır.",
+ "nativeCalendarSyncTitle": "Takvimleri Eşitle",
+ "nativeCalendarSyncTooltip": "Varsayılan olarak, bir Uygulama Koruma İlkesi, yerel Takvim uygulamasıyla takvim eşitlemesi sağlar, ancak \"İlke ile yönetilen uygulama verilerini yerel uygulamalarla eşitleme\" ayarıyla takvim eşitlemesinin kullanılabilirliğini engellemek için kullanılabilir. Bu ayarın \"Kapalı\" olarak yapılandırılması, Uygulama Koruma İlkesi ayarı İzin Verildi olarak ayarlandığında takvim eşitlemesini engeller.",
+ "playMyEmailsTitle": "E-postalarımı Oynat",
+ "playMyEmailsTooltip": "E-postalarımı Oynat özelliği uygulamada varsayılan olarak etkin değildir ancak uygun kullanıcıların gelen kutusunda bir başlık olarak öne çıkarılır. Kapalı olarak ayarlandığında, bu özellik uygulamada uygun kullanıcılar için öne çıkarılmaz. Bu özellik Kapalı olarak ayarlansa bile kullanıcılar, E-postalarımı Oynat özelliğini uygulamadan el ile etkinleştirmeyi seçebilir. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık olur ve özellik uygun kullanıcılar için öne çıkarılır.",
+ "signAllEmails": "Tüm e-postaları imzala",
+ "signAllEmailsAllowUserChangeTooltip": "Kullanıcının, Tüm e-postaları imzala ayarını değiştirmesine izin verilip verilmediğini belirtin.",
+ "signAllEmailsTooltip": "Tüm e-postaların imzalanıp imzalanmayacağını belirtin. Dijital imza, e-postanın gerçek olduğunu doğrular ve aktarım sırasında içerikle oynanmamasını sağlar.",
+ "syncAddressTitle": "Adres",
+ "syncAddressTooltip": "Bu değer, kişinin adresinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncBirthdayTitle": "Doğum günü",
+ "syncBirthdayTooltip": "Bu değer, kişinin doğum gününün yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncCompanyTitle": "Şirket",
+ "syncCompanyTooltip": "Bu değer, kişinin şirket adının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncDepartmentTitle": "Bölüm",
+ "syncDepartmentTooltip": "Bu değer, kişinin departmanının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncEmailAddressTitle": "E-posta Adresi",
+ "syncEmailAddressTooltip": "Bu değer, kişinin e-posta adresinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncInstantMessagingAddressTitle": "Anlık İleti Adresi",
+ "syncInstantMessagingAddressTooltip": "Bu değer, kişinin anlık ileti adresinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncJobTitleTitle": "İş unvanı",
+ "syncJobTitleTooltip": "Bu değer, kişinin iş unvanının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncNicknameTitle": "Takma ad",
+ "syncNicknameTooltip": "Bu değer, kişinin takma adının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncNotesTitle": "Notes",
+ "syncNotesTooltip": "Bu değer, kişinin notlarının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncPhoneHomeFaxNumberTitle": "Ev Faksı Numarasını Ara",
+ "syncPhoneHomeFaxNumberTooltip": "Bu değer, kişinin ev faksı numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncPhoneHomeNumberTitle": "Ev Telefonu Numarasını Ara",
+ "syncPhoneHomeNumberTooltip": "Bu değer, kişinin ev telefonu numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncPhoneMobileNumberTitle": "Cep Telefonu Numarasını Ara",
+ "syncPhoneMobileNumberTooltip": "Bu değer, kişinin cep telefonu numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncPhoneOtherNumberTitle": "Diğer Numarayı Ara",
+ "syncPhoneOtherNumberTooltip": "Bu değer, kişinin diğer telefon numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncPhonePagerNumberTitle": "Çağrı Cihazı Numarasını Ara",
+ "syncPhonePagerNumberTooltip": "Bu değer, kişinin çağrı cihazı numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncPhoneWorkFaxNumberTitle": "İş Faksı Numarasını Ara",
+ "syncPhoneWorkFaxNumberTooltip": "Bu değer, kişinin iş faksı numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncPhoneWorkNumberTitle": "İş Telefonu Numarasını Ara",
+ "syncPhoneWorkNumberTooltip": "Bu değer, kişinin iş telefonu numarasının yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncPrefixTitle": "Ad Öneki",
+ "syncPrefixTooltip": "Bu değer, kişinin ad ön ekinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "syncSuffixTitle": "Ad Soneki",
+ "syncSuffixTooltip": "Bu değer, kişinin ad son ekinin yerel kişilerle eşitlenip eşitlenmeyeceğini belirtir.",
+ "textPredictionsTitle": "Metin Tahminleri",
+ "textPredictionsTooltip": "Outlook, siz ileti oluştururken sözcük ve tümceler önerebilir. Outlook öneri sunduğunda öneriyi kabul etmek için kaydırın. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık olarak ayarlanır.",
+ "themesEnabledTitle": "Temalar Etkin",
+ "themesEnabledTooltip": "Kullanıcının özel görsel tema kullanmasına izin verilip verilmediğini belirtin."
+ },
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Şirketinizde kullanım için onaylanmamış uygulamalar yükleyen kullanıcılar hakkında bilgi sahibi olmak için bu ayarları kullanın. Kısıtlı uygulama listesi türünü seçin:
\r\n Yasaklı uygulamalar - Kullanıcılar tarafından yüklendiğinde bilgilendirilmek istediğiniz uygulamaların listesi. \r\n Onaylı uygulamalar - Şirketinizde kullanım için onaylanmış uygulamaların listesi. Kullanıcılar bu listede olmayan bir uygulama yüklediğinde bilgilendirilirsiniz. \r\n ",
+ "androidZebraMxZebraMx": "XML biçiminde bir MX profilini karşıya yükleyerek Zebra cihazları yapılandırın.",
+ "iosDeviceFeaturesAirprint": "iOS cihazlarını ağınızdaki AirPrint uyumlu yazıcılara otomatik olarak bağlanacak şekilde yapılandırmak için bu ayarları kullanın. Yazıcılarınızın IP adresine ve kaynak yoluna ihtiyacınız vardır.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "iOS 13.0 ve sonraki sürümleri çalıştıran cihazlar için çoklu oturum açma (SSO) sağlayan bir uygulama uzantısı yapılandırın.",
+ "iosDeviceFeaturesHomeScreenLayout": "iOS cihazlarında dock ve Giriş Ekranları için ekran düzenini yapılandırın. Bazı cihazlarda, görüntülenebilecek öğe sayısı sınırlandırılmış olabilir.",
+ "iosDeviceFeaturesIOSWallpaper": "iOS cihazlarının Giriş Ekranında ve/veya kilit ekranında gösterilecek görüntüyü seçin.\r\n Her iki konumda da benzersiz bir görüntü göstermek için kilit ekranı görüntüsüyle ve Giriş Ekranı görüntüsüyle iki ayrı profil oluşturun.\r\n Daha sonra her iki profili de kullanıcılarınıza atayın.\r\n \r\n
\r\n
Maksimum dosya boyutu: 750 KB
\r\n
Dosya türü: PNG, JPG veya JPEG
\r\n
\r\n ",
+ "iosDeviceFeaturesNotifications": "Uygulamalar için bildirim ayarlarını belirtin. iOS 9.3 ve sonraki sürümleri destekler.",
+ "iosDeviceFeaturesSharedDevice": "Kilit ekranında görüntülenecek isteğe bağlı bir metin belirtin. Bu, iOS 9.3 ve sonrası sürümlerde desteklenir. Daha Fazla Bilgi Edinin",
+ "iosGeneralApplicationRestrictions": "Şirketinizde kullanım için onaylanmamış uygulamalar yükleyen kullanıcılar hakkında bilgi sahibi olmak için bu ayarları kullanın. Kısıtlı uygulama listesi türünü seçin:
\r\n Yasaklı uygulamalar - Kullanıcılar tarafından yüklendiğinde bilgilendirilmek istediğiniz uygulamaların listesi. \r\n Onaylı uygulamalar - Şirketinizde kullanım için onaylanmış uygulamaların listesi. Kullanıcılar bu listede olmayan bir uygulama yüklediğinde bilgilendirilirsiniz. \r\n ",
+ "iosGeneralApplicationVisibility": "Kullanıcının görüntüleyebileceği veya başlatabileceği iOS uygulamalarını belirtmek için, gösterilen uygulamalar listesini kullanın. Kullanıcının görüntüleyemeyeceği veya başlatamayacağı iOS uygulamalarını belirtmek için, gizli uygulamalar listesini kullanın.",
+ "iosGeneralAutonomousSingleAppMode": "Bu listeye eklediğiniz ve bir cihaza atadığınız uygulamalar, başlatıldıktan sonra yalnızca kendisini çalıştırmak için cihazı kilitleyebilir veya belirli bir eylem çalışırken (örneğin bir test yapılırken) cihazı kilitleyebilir. Eylem tamamlandıktan veya siz kısıtlamayı kaldırdıktan sonra cihaz normal durumuna geri döner.",
+ "iosGeneralKiosk": "Kiosk modu, çeşitli ayarları cihaza kilitler veya cihazda çalıştırılabilecek tek bir uygulamayı belirtir. Bu özellik, cihazın yalnızca tek bir demo uygulamasını çalıştırmasını istediğiniz perakende mağaza gibi ortamlarda yararlı olabilir.",
+ "macDeviceFeaturesAirprint": "macOS cihazları, ağınızdaki AirPrint uyumlu yazıcılara otomatik olarak bağlanmak üzere yapılandırmak için bu ayarları kullanın. Yazıcılarınızın IP adresleri ve kaynak yoluna ihtiyacınız olacaktır.",
+ "macDeviceFeaturesAssociatedDomains": "Kuruluşunuzun uygulamaları ile web siteleri arasında veri ve oturum açma kimlik bilgilerini paylaşmak için ilişkili etki alanlarını yapılandırın. Bu profil, macOS 10.15 veya sonraki sürümleri çalıştıran cihazlara uygulanabilir.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "macOS 10.15 veya sonraki sürümleri çalıştıran cihazlar için çoklu oturum açma (SSO) sağlayan bir uygulama uzantısı yapılandırın.",
+ "macDeviceFeaturesLoginItems": "Kullanıcılar cihazlarında oturum açtığında hangi uygulamaların, dosyaların ve klasörlerin açılacağını seçin. Kullanıcıların seçilen uygulamaların açılma şeklini değiştirmesini istemiyorsanız, uygulamaları kullanıcı yapılandırmasından gizleyebilirsiniz.",
+ "macDeviceFeaturesLoginWindow": "macOS oturum açma ekranının görünümünü ve kullanıcılara oturum açmadan önce ve açtıktan sonra sunulan işlevleri yapılandırın.",
+ "macExtensionsKernelExtensions": "10.13.2 veya üzeri bir sürüm çalıştıran macOS cihazlarda çekirdek uzantı ilkesini yapılandırmak için bu ayarları kullanın.",
+ "macGeneralDomains": "Son kullanıcı tarafından gönderilen veya alınan ve burada belirttiğiniz etki alanlarıyla eşleşmeyen e-postalar, güvenilmeyen olarak işaretlenir.",
+ "windows10EndpointProtectionApplicationGuard": "Microsoft Edge kullanırken Microsoft Defender Application Guard, ortamınızı kuruluşunuz tarafından güvenilir olarak tanımlanmayan sitelerden korur. Kullanıcılar, yalıtılmış ağ sınırınızda listelenmeyen siteleri ziyaret ettiğinde, siteler Hyper-V'de sanal bir göz atma oturumunda açılır. Güvenilir siteler, Cihaz Yapılandırmasında yapılandırılabilen bir ağ sınırı ile tanımlanır. Bu özelliğin yalnızca 64 bit Windows 10 veya sonraki bir sürümünü çalıştıran cihazlarda kullanılabildiğini unutmayın.",
+ "windows10EndpointProtectionCredentialGuard": "Credential Guard'ı etkinleştirmek şu gerekli ayarları etkinleştirir:\r\n \r\n
\r\n
Sanallaştırma Tabanlı Güvenliği Etkinleştir: Bir sonraki yeniden başlatmada sanallaştırma tabanlı güvenliği (VBS) açar. Sanallaştırma tabanlı güvenlik, güvenlik hizmetlerine destek sağlamak için Windows Hiper Yöneticisi'ni kullanır.
\r\n \r\n
Doğrudan Bellek Erişimi ile Güvenli Önyükleme: VBS'yi Güvenli Önyükleme ve doğrudan bellek erişimi (DMA) ile açar.
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "Microsoft Defender Uygulama Denetimi tarafından denetlenmesi gereken veya çalışması için güvenilebilecek ek uygulamaları seçin. Windows bileşenlerine ve Windows mağazasından alınan tüm uygulamalara çalışmaları için otomatik olarak güvenilir.
\r\n Uygulamalar \"Yalnızca denetim\" modunda çalışırken engellenmez. \"Yalnızca denetim\" modu tüm olayları yerel günlüklere kaydeder.\r\n ",
+ "windows10GeneralPrivacyPerApp": "\"Varsayılan gizlilik\"te tanımladığınızdan farklı bir gizlilik davranışı olması gereken uygulamaları ekleyin.",
+ "windows10NetworkBoundaryNetworkBoundary": "Ağ sınırı, bulut tarafından barındırılan etki alanı ve kuruluş ağı üzerindeki bilgisayarlar için IP adres aralıkları gibi kurumsal kaynakların listesidir. Bu konumlarda bulunan verileri korumaya yönelik ilkeler uygulamak için ağ sınırlarını tanımlayın.",
+ "windowsHealthMonitoring": "Windows işlevsel durum izleme ilkesini yapılandırın.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone, kullanıcıların yasaklı uygulama listesinde belirtilen veya onaylı uygulamalar listesinde belirtilmeyen uygulamaları yüklemesini veya başlatmasını engelleyebilir. Tüm yönetilen uygulamalar onaylı listeye eklenmelidir."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Yalnızca teknisyen aşamasında seçili engelleyici uygulamaları başarısız kıl",
+ "apps": "uygulamalar",
+ "appsListName": "Uygulama listesi",
+ "blockingApps": "Engelleyici uygulamalar",
+ "managedApps": "Yönetilen uygulamalar",
+ "noApps": "Uygulama yok",
+ "noAppsError": "Uygulamalar alınırken hata oluştu",
+ "selectApps": "Uygulama seç",
+ "selectedAppsCount": "{0} uygulama seçildi (en fazla 100)",
+ "useSelectedAppsAll": "Tümü",
+ "useSelectedAppsSelected": "Seçili",
+ "useSelectedAppsToggleLabel": "Gerekli uygulamalar kullanıcıya/cihaza atanmışsa bu uygulamalar yüklenene kadar cihaz kullanımını engelle"
+ },
+ "Header": {
+ "application": "Uygulama",
+ "publisher": "Yayımcı",
+ "version": "Sürüm"
+ },
+ "SearchBox": {
+ "ariaLabel": "Uygulamaları arayın",
+ "placeHolder": "Ada ve yayımcıya göre ara"
+ },
+ "allowToUseToggle": "Yükleme hatası oluşursa kullanıcıların cihazı kullanmasına izin ver",
+ "blockToggle": "Tüm uygulamalar ve profiller yüklenene kadar cihaz kullanımını engelle",
+ "blockToolTip": "Örneğin, Microsoft Word’ü bu listeye eklerseniz, hedeflenen kullanıcılar ve cihazlar Word başarıyla yükleninceye kadar kayıt anlaşması durumu sayfasından ayrılamaz.",
+ "collectLogToggle": "Son kullanıcılar için günlük toplama ve tanılama sayfasını aç",
+ "create": "Profil Oluşturma",
+ "customMessageTextBox": "Hata iletisi",
+ "customMessageToggle": "Zaman sınırı veya hatası oluştuğunda özel ileti göster",
+ "enableForAutopilotOnlyToggle": "İlk çalıştırma deneyimi (OOBE) tarafından sağlanan cihazlarda yalnızca sayfayı göster",
+ "installQualityUpdatesToggle": "Windows kalite güncelleştirmelerini yükleyin (cihazı yeniden başlatabilir) (önizleme)",
+ "progressToggle": "Uygulama ve profil yapılandırma ilerlemesini göster",
+ "resetToggle": "Yükleme hatası oluşursa kullanıcıların cihazı sıfırlamasına izin ver",
+ "timeout": "Yükleme belirtilen dakikadan uzun sürerse hata göster"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Özellik",
+ "rule": "Kural",
+ "ruleDetails": "Kural Ayrıntıları",
+ "value": "Değer"
+ },
+ "assignIf": "Şu geçerliyse profili ata:",
+ "deleteWarning": "Bu işlem seçili Uygulanabilirlik Kuralını silecek",
+ "dontAssignIf": "Şu geçerliyse profili atama:",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "ve diğer {0} etki alanı denetleyicisi",
+ "instructions": "Bu profilin atanmış bir grup içinde nasıl uygulanacağını belirtin. Intune, profili yalnızca bu kuralların birleşik ölçütlerine uyan cihazlara uygular.",
+ "maxText": "En Büyük",
+ "minText": "En Küçük",
+ "noActionRow": "Uygulanabilirlik Kuralı Belirtilmedi",
+ "oSVersion": "ör. 1.2.3.4",
+ "toText": "buraya",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "İşletim sistemi sürümü",
+ "windows10OsVersion": "İşletim sistemi sürümü",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Kullanıcının ayar değiştirmesine izin ver",
+ "tooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin."
+ },
+ "AllowWorkAccounts": {
+ "title": "Yalnızca iş veya okul hesaplarına izin ver",
+ "tooltip": " Bu ayar etkinleştirildiğinde kullanıcılar Outlook'a kişisel e-posta ve depolama hesapları ekleyemez. Kullanıcı Outlook'a kişisel hesap eklemişse kişisel hesabı kaldırması istenir. Kullanıcı bu hesabı kaldırmazsa iş veya okul hesabı eklenemez."
+ },
+ "BlockExternalImages": {
+ "title": "Harici görüntüleri engelle",
+ "tooltip": "Harici görüntüleri engelleme özelliği etkinleştirildiğinde uygulama İnternet'te barındırılan ve ileti gövdesine ekli görüntülerin indirilmesini engeller. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır"
+ },
+ "ConfigureEmail": {
+ "title": "E-posta hesabı ayarlarını yapılandır"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Varsayılan uygulama imzası, uygulamanın ileti oluşturma sırasında varsayılan imza olarak \"Android için Outlook'u edinin\" imzasını kullanıp kullanmayacağını belirtir. Ayar Kapalı olarak yapılandırıldıysa varsayılan imza kullanılmaz, ancak kullanıcılar kendi imzalarını ekleyebilir.\r\n\r\nYapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak ayarlanır.",
+ "iOS": "Varsayılan uygulama imzası, uygulamanın ileti oluşturma sırasında varsayılan imza olarak \"iOS için Outlook'u edinin\" imzasını kullanıp kullanmayacağını belirtir. Ayar Kapalı olarak yapılandırıldıysa varsayılan imza kullanılmaz, ancak kullanıcılar kendi imzalarını ekleyebilir.\r\n\r\nYapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak ayarlanır."
+ },
+ "title": "Varsayılan uygulama imzası"
+ },
+ "OfficeFeedReplies": {
+ "title": "Keşif Akışı",
+ "tooltip": "Keşif Akışı, en sık erişilen Office dosyalarınızı öne çıkarır. Kullanıcı için Delve etkinleştirildiğinde, bu akış da varsayılan olarak etkinleştirilir. Yapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak belirlenir."
+ },
+ "OrganizeMailByThread": {
+ "title": "Postaları yazışmaya göre düzenleme",
+ "tooltip": "Outlook varsayılan olarak, posta konuşmalarını yazışmalardan oluşan bir görüşme görünümünde toplar. Bu ayar devre dışı bırakılırsa Outlook her bir postayı ayrı ayrı görüntüler ve bunları yazışmaya göre gruplandırmaz."
+ },
+ "PlayMyEmails": {
+ "title": "E-postalarımı Oynat",
+ "tooltip": "E-postalarımı Oynat özelliği uygulamada varsayılan olarak etkin değildir ancak uygun kullanıcıların gelen kutusunda bir başlık olarak öne çıkarılır. Kapalı olarak ayarlandığında, bu özellik uygulamada uygun kullanıcılar için öne çıkarılmaz. Bu özellik Kapalı olarak ayarlansa bile kullanıcılar, E-postalarımı Oynat özelliğini uygulamadan el ile etkinleştirmeyi seçebilir. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık olur ve özellik uygun kullanıcılar için öne çıkarılır."
+ },
+ "SuggestedReplies": {
+ "title": "Önerilen yanıtlar",
+ "tooltip": "Bir iletiyi açtığınızda Outlook, iletinin altında yanıtlar önerebilir. Önerilen bir yanıtı seçerseniz göndermeden önce bunu düzenleyebilirsiniz."
+ },
+ "SyncCalendars": {
+ "title": "Takvimleri Eşitle",
+ "tooltip": "Kullanıcıların Outlook takvimini yerel takvim uygulamasıyla ve veritabanıyla eşitleyip eşitleyemeyeceğini yapılandırın."
+ },
+ "TextPredictions": {
+ "title": "Metin Tahminleri",
+ "tooltip": "Outlook, siz ileti oluştururken sözcük ve tümceler önerebilir. Outlook öneri sunduğunda öneriyi kabul etmek için kaydırın. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık olarak ayarlanır."
+ },
+ "ThemesEnabled": {
+ "title": "Etkin temalar",
+ "tooltip": "Kullanıcının özel görsel tema kullanmasına izin verilip verilmeyeceğini belirtin."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "Chrome işletim sistemi cihazları"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Yönetici kişileri",
+ "appPackaging": "Uygulama paketleme",
+ "autopatchGroups": "Otomatik yama grupları",
+ "devices": "Cihazlar",
+ "featureEnablement": "Özellik etkinleştirme",
+ "feedback": "Geri Bildirim",
+ "gettingStarted": "Başlarken",
+ "messages": "İletiler",
+ "onlineResources": "Çevrimiçi kaynaklar",
+ "policyHealth": "İlke durumu",
+ "policyHealthPreview": "İlke sistem durumu (önizleme)",
+ "releaseManagement": "Sürüm yönetimi",
+ "serviceRequests": "Hizmet istekleri",
+ "settings": "Ayarlar",
+ "supportRequests": "Destek istekleri",
+ "tenantEnrollment": "Kiracı kaydı",
+ "tenantManagement": "Kiracı yönetimi"
+ },
+ "actions": "Uyumsuzluk Eylemleri",
+ "advancedExchangeSettings": "Exchange Online ayarları",
+ "advancedThreatProtection": "Uç Nokta için Microsoft Defender",
+ "allApps": "Tüm uygulamalar",
+ "allDevices": "Tüm cihazlar",
+ "androidFotaDeployments": "Android FOTA dağıtımları",
+ "appBundles": "Uygulama Paketi Grupları",
+ "appCategories": "Uygulama kategorileri",
+ "appConfigPolicies": "Uygulama yapılandırma ilkeleri",
+ "appConfigurationStatus": "Uygulama Yapılandırması Durumu",
+ "appInstallStatus": "Uygulama yükleme durumu",
+ "appLicences": "Uygulama lisansları",
+ "appProtectionPolicies": "Uygulama koruma ilkeleri",
+ "appProtectionStatus": "Uygulama Koruma durumu",
+ "appSelectiveWipe": "Uygulama seçmeli silme",
+ "appleVppTokens": "Apple VPP Belirteçleri",
+ "apps": "Uygulamalar",
+ "assign": "Atamalar",
+ "assignedPermissions": "Atanan izinler",
+ "assignedRoles": "Atanan roller",
+ "autopilotDeploymentReport": "Autopilot dağıtımları (önizleme)",
+ "autopilotDeploymentReportV2": "Autopilot dağıtımları 2.0 (önizleme)",
+ "brandingAndCustomization": "Özelleştirme",
+ "cartProfiles": "Kart profilleri",
+ "certificateConnectors": "Sertifika bağlayıcıları",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Buluta ekli cihazlar (önizleme)",
+ "cloudPcActions": "Bulut PC eylemleri (önizleme)",
+ "cloudPcMaintenanceWindows": "Bulut PC bakım pencereleri (Önizleme)",
+ "compliancePolicies": "Uyumluluk ilkeleri",
+ "complianceScriptManagement": "Betikler",
+ "complianceScriptManagementPreview": "Betikler (önizleme)",
+ "complianceSettings": "Uyumluluk ilkesi ayarları",
+ "conditionStatements": "Koşul deyimleri",
+ "conditions": "Konumlar",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Yapılandırma profilleri",
+ "configurationScripts": "Yapılandırma Komut Dosyası",
+ "connectorsAndTokens": "Bağlayıcılar ve belirteçler",
+ "corporateDeviceIdentifiers": "Şirket cihazı tanımlayıcıları",
+ "customAttributes": "Özel öznitelikler",
+ "customAttributesMacOS": "macOS için özel öznitelikler",
+ "customNotifications": "Özel bildirimler",
+ "deploymentSettings": "Dağıtım ayarları",
+ "derivedCredentials": "Türetilmiş Kimlik Bilgileri",
+ "deviceActions": "Cihaz eylemleri",
+ "deviceCategories": "Cihaz kategorileri",
+ "deviceCleanUp": "Cihaz temizleme kuralları",
+ "deviceEnrollmentManagers": "Cihaz kayıt yöneticileri",
+ "deviceExecutionStatus": "Cihaz durumu",
+ "deviceLimitEnrollmentRestrictions": "Kayıt cihazı sınırı kısıtlamaları",
+ "deviceTypeEnrollmentRestrictions": "Kayıt cihazı platform kısıtlamaları",
+ "devices": "Cihazlar",
+ "discoveredApps": "Bulunan uygulamalar",
+ "edgePolicies": "Microsoft Edge İlkeleri",
+ "embeddedSIM": "eSIM hücresel profilleri (önizleme)",
+ "enrollDevices": "Cihazları kaydet",
+ "enrollmentFailures": "Kayıt hataları",
+ "enrollmentNotifications": "Kayıt anlaşması bildirimleri (önizleme)",
+ "enrollmentRestrictions": "Kayıt kısıtlamaları",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange hizmet bağlayıcıları",
+ "failuresForCumulativeQualityUpdates": "Windows Toplu Kalite güncelleştirmesi hataları",
+ "failuresForDriverUpdates": "Windows Sürücü güncelleştirme hataları",
+ "failuresForFeatureUpdates": "Özellik güncelleştirme hataları",
+ "failuresForQualityUpdates": "Windows Hızlandırılmış güncelleştirme hataları",
+ "featureFlighting": "Özellik yayını",
+ "featureUpdateDeployments": "Windows 10 ve üstü için özellik güncelleştirmeleri",
+ "flighting": "Süreleme",
+ "fotaUpdate": "Üretici yazılımı kablosuz güncelleştirmesi",
+ "groupPolicy": "Yönetim Şablonları",
+ "groupPolicyAnalytics": "Grup ilkesi analizi",
+ "helpSupport": "Yardım ve destek",
+ "helpSupportReplacement": "Yardım ve destek ({0})",
+ "iOSAppProvisioning": "iOS uygulama sağlama profilleri",
+ "incompleteUserEnrollments": "Eksik kullanıcı kayıtları",
+ "iosUpdates": "iOS/iPadOS güncelleştirmeleri",
+ "legacyPcManagement": "Eski bilgisayar yönetimi",
+ "macOSSoftwareUpdate": "macOS güncelleştirmeleri",
+ "macOSSoftwareUpdateAccountSummaries": "macOS cihazlar için yükleme durumu",
+ "macOSSoftwareUpdateCategorySummaries": "Yazılım güncelleştirmeleri özeti",
+ "macOSSoftwareUpdateStateSummaries": "güncelleştirmeler",
+ "managedGooglePlay": "Yönetilen Google Play",
+ "msfb": "İş İçin Microsoft Store",
+ "myPermissions": "İzinlerim",
+ "notifications": "Bildirimler",
+ "officeApps": "Office uygulamaları",
+ "officeProPlusPolicies": "Office uygulamaları için ilkeler",
+ "onPremise": "Şirket İçi",
+ "onPremisesConnector": "Exchange ActiveSync şirket içi bağlayıcısı",
+ "onPremisesDeviceAccess": "Exchange ActiveSync cihazları",
+ "onPremisesManageAccess": "Exchange şirket içi erişimi",
+ "outOfDateIosDevices": "iOS cihazları için yükleme hataları",
+ "overview": "Genel Bakış",
+ "partnerDeviceManagement": "İş ortağı cihaz yönetimi",
+ "perUpdateRingDeploymentState": "Güncelleştirme halkası dağıtım durumuna göre",
+ "permissions": "İzinler",
+ "platformApps": "{0} uygulama",
+ "platformDevices": "{0} cihaz",
+ "platformEnrollment": "{0} kaydı",
+ "policies": "İlkeler",
+ "profiles": "Profiller",
+ "properties": "Özellikler",
+ "reports": "Raporlar",
+ "retireNoncompliantDevices": "Uyumlu olmayan cihazları kullanımdan kaldır",
+ "retireNoncompliantDevicesPreview": "Uyumlu olmayan cihazları kullanımdan kaldır (önizleme)",
+ "role": "Rol",
+ "scriptManagement": "Komut Dosyaları",
+ "securityBaselines": "Güvenlik temelleri",
+ "serviceToServiceConnector": "Exchange Online bağlayıcısı",
+ "servicenowConnector": "ServiceNow bağlayıcısı",
+ "shellScripts": "Kabuk betikleri",
+ "teamViewerConnector": "TeamViewer bağlayıcısı",
+ "telecomeExpenseManagement": "Telekom gider yönetimi",
+ "tenantAdmin": "Kiracı yöneticisi",
+ "tenantAdministration": "Kiracı yönetimi",
+ "termsAndConditions": "Hüküm ve koşullar",
+ "titles": "Başlıklar",
+ "troubleshoot": "Sorun giderme",
+ "troubleshootSupport": "Sorun Giderme ve destek",
+ "user": "Kullanıcı",
+ "userExecutionStatus": "Kullanıcı durumu",
+ "wdacSupplementalPolicies": "S modu ek ilkeleri",
+ "win32CatalogUpdateApp": "Kurumsal Uygulama Yönetimi uygulamaları için güncelleştirmeler",
+ "win32CatalogUpdateAppInPreview": "Windows (Win32) katalog uygulamaları için güncelleştirmeler (Önizleme)",
+ "win32CatalogUpdateAppPreviewTitle": "Güncelleştirmeler içeren Kurumsal Uygulama Kataloğu uygulaması (önizleme)",
+ "win32CatalogUpdateAppTitle": "Güncelleştirmeler içeren Kurumsal Uygulama Kataloğu uygulaması",
+ "windows10DriverUpdate": "Windows 10 ve üzeri için sürücü güncelleştirmeleri",
+ "windows10QualityUpdate": "Windows 10 ve üstü için kalite güncelleştirmeleri",
+ "windows10UpdateRings": "Windows 10 ve sonraki sürümler için güncelleştirme kademeleri",
+ "windows10XPolicyFailures": "Windows 10X ilke hataları",
+ "windows365PartnerConnector": "Windows 365 iş ortağı bağlayıcıları",
+ "windowsDiagnosticData": "Windows verileri",
+ "windowsEnterpriseCertificate": "Windows Enterprise sertifikası",
+ "windowsManagement": "Betikler",
+ "windowsSideLoadingKeys": "Windows dışarıdan yükleme anahtarları",
+ "windowsSymantecCertificate": "Windows DigiCert sertifikası",
+ "windowsThreatReport": "Tehdit aracı durumu"
+ },
"TAPSettings": {
"AllowedDataIngestionLocations": {
"label": "Kullanıcıların seçili hizmetlerden veri açmasına izin ver",
@@ -1637,67 +2327,1803 @@
"previousPinBlockCount": "Korunacak önceki PIN değerlerinin sayısını seçin"
}
},
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "Tüm uygunluk ilkeleri için bir engelleme eylemi gereklidir.",
- "graceperiod": "Zamanlama (uyumsuzluktan sonraki günler)",
- "graceperiodInfo": "Bu eylemin, kaç günlük uyumsuzluktan sonra kullanıcının cihazına yönelik olarak tetikleneceğini belirtin",
- "subtitle": "Eylem parametrelerini belirtin",
- "title": "Eylem parametreleri"
+ "OptionalFeatureUpdateOptions": {
+ "optional": "İsteğe bağlı güncelleştirme olarak kullanıcılara sun",
+ "optionalValue": "İsteğe bağlı",
+ "required": "Gerekli güncelleştirme olarak kullanıcılara sun",
+ "requiredValue": "Gerekli"
},
- "List": {
- "gracePeriodDay": "Uyumsuzluktan sonra {0} gün",
- "gracePeriodDays": "Uyumsuzluktan sonra {0} gün",
- "gracePeriodHour": "Uyumsuzluktan {0} saat sonra",
- "gracePeriodHours": "Uyumsuzluktan {0} saat sonra",
- "gracePeriodMinute": "Uyumsuzluktan {0} dakika sonra",
- "gracePeriodMinutes": "Uyumsuzluktan {0} dakika sonra",
- "immediately": "Hemen",
- "schedule": "Zamanlama",
- "scheduleInfoBalloon": "Uyumsuzluktan sonra geçecek gün sayısı",
- "subtitle": "Uyumlu olmayan cihazlardaki eylem dizisini belirtin",
- "title": "Eylemler"
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise sistem uygulaması",
+ "androidForWorkApp": "Yönetilen Google Play Store uygulaması",
+ "androidLobApp": "Android iş kolu uygulaması",
+ "androidStoreApp": "Android mağaza uygulaması",
+ "builtInAndroid": "Yerleşik Android uygulaması",
+ "builtInApp": "Yerleşik uygulama",
+ "builtInIos": "Yerleşik iOS uygulaması",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS web klibi",
+ "iosLobApp": "iOS iş kolu uygulaması",
+ "iosStoreApp": "iOS mağaza uygulaması",
+ "iosVppApp": "iOS Volume Purchase Program uygulaması",
+ "lineOfBusinessApp": "İş kolu uygulaması",
+ "macOSDmgApp": "macOS uygulaması (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS iş kolu uygulaması",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365 Uygulamaları (macOS)",
+ "macOSPkgApp": "macOS uygulaması (PKG)",
+ "macOSWebClip": "macOS web klibi",
+ "macOsVppApp": "macOS Volume Purchase Program uygulaması",
+ "managedAndroidLobApp": "Yönetilen Android iş kolu uygulaması",
+ "managedAndroidStoreApp": "Yönetilen Android mağaza uygulaması",
+ "managedGooglePlayApp": "Yönetilen Google Play Store uygulaması",
+ "managedGooglePlayPrivateApp": "Yönetilen Google Play özel uygulaması",
+ "managedGooglePlayWebApp": "Yönetilen Google Play web bağlantısı",
+ "managedIosLobApp": "Yönetilen iOS iş kolu uygulaması",
+ "managedIosStoreApp": "Yönetilen iOS mağaza uygulaması",
+ "microsoftStoreForBusinessApp": "İş İçin Microsoft Store uygulaması",
+ "microsoftStoreForBusinessReleaseManagedApp": "İş İçin Microsoft Store",
+ "officeSuiteApp": "Microsoft 365 Uygulamaları (Windows 10 ve üzeri)",
+ "webApp": "Web bağlantısı",
+ "windowsAppXLobApp": "Windows AppX iş kolu uygulaması",
+ "windowsClassicApp": "Windows uygulaması (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 ve üzeri)",
+ "windowsMobileMsiLobApp": "Windows MSI iş kolu uygulaması",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX iş kolu uygulaması",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX iş kolu uygulaması",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 mağaza uygulaması",
+ "windowsPhoneXapLobApp": "Windows Phone XAP iş kolu uygulaması",
+ "windowsStoreApp": "Microsoft Store uygulaması (eski)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX iş kolu uygulaması",
+ "windowsUniversalLobApp": "Windows Evrensel iş kolu uygulaması",
+ "windowsWebApp": "Windows web bağlantısı"
+ },
+ "PolicySet": {
+ "appManagement": "Uygulama yönetimi",
+ "assignments": "Atamalar",
+ "basics": "Temel Ayarlar",
+ "deviceEnrollment": "Cihaz kaydı",
+ "deviceManagement": "Cihaz yönetimi",
+ "scopeTags": "Kapsam etiketleri",
+ "appConfigurationTitle": "Uygulama yapılandırma ilkeleri",
+ "appProtectionTitle": "Uygulama koruma ilkeleri",
+ "appTitle": "Uygulamalar",
+ "iOSAppProvisioningTitle": "iOS uygulama sağlama profilleri",
+ "deviceLimitRestrictionTitle": "Cihaz sınırı kısıtlamaları",
+ "deviceTypeRestrictionTitle": "Cihaz türü kısıtlamaları",
+ "enrollmentStatusSettingTitle": "Kayıt durumu sayfaları",
+ "windowsAutopilotDeploymentProfileTitle": "Windows Autopilot Deployment profilleri",
+ "deviceComplianceTitle": "Cihaz uyumluluk ilkeleri",
+ "deviceConfigurationTitle": "Cihaz yapılandırma profilleri",
+ "powershellScriptTitle": "Powershell betikleri"
+ },
+ "Win32Program": {
+ "DeviceRestartBehaviorOptions": {
+ "allow": "Uygulama yüklemesi, cihazın yeniden başlatılmasını zorlayabilir",
+ "basedOnReturnCode": "Dönüş kodlarına dayalı davranışı belirle",
+ "force": "Intune zorunlu bir cihaz yeniden başlatma işlemi gerçekleştirecek",
+ "suppress": "Belirli bir eylem yok"
+ },
+ "InstallExperience": {
+ "maxRunTimeInMinutes": "Gerekli yükleme süresi (dakika)",
+ "maxRunTimeInMinutesToolTip": "Sistemin, programın yükleme işlemini tamamlamasını beklemesi için gereken dakika sayısı. Varsayılan değer 60 dakikadır."
+ },
+ "RunAsAccountOptions": {
+ "system": "Sistem",
+ "user": "Kullanıcı"
+ },
+ "availableUninstall": "Kullanılabilir kaldırmaya izin ver",
+ "availableUninstallTooltip": "Şirket Portalı’ından kullanıcılar için bu uygulamada kaldırma seçeneği sağlamak için 'Evet' seçeneğini işaretleyin. Kullanıcıların uygulamayı Şirket Portalı’ndan kaldırmasını engellemek için 'Hayır'ı seçin.",
+ "bladeTitle": "Program",
+ "deviceRestartBehavior": "Cihaz yeniden başlatma davranışı",
+ "deviceRestartBehaviorTooltip": "Uygulama başarıyla yüklendikten sonra cihaz yeniden başlatma davranışını seçin. Cihazı dönüş kodları yapılandırma ayarlarına bağlı olarak yeniden başlatmak için 'Davranışı dönüş kodlarına göre belirle' seçeneğini belirleyin. MSI tabanlı uygulamaların yüklenmesi sırasında cihaz yeniden başlatma işlemlerini ertelemek için 'Belirli bir eylem yok' seçeneğini belirleyin. Uygulama yüklemesinin yeniden başlatmayı ertelemeden tamamlanmasına izin vermek için 'Uygulama yüklemesi cihazın yeniden başlatılmasını zorlayabilir' seçeneğini belirleyin. Her başarılı uygulama yüklemesinden sonra cihazı yeniden başlatmak için 'Intune zorunlu bir cihaz yeniden başlatma zorlayacak' seçeneğini belirleyin.",
+ "header": "Bu uygulamayı yükleme ve kaldırma komutlarını belirtin:",
+ "installCommand": "Yükleme komutu",
+ "installCommandMaxLengthErrorMessage": "Yükleme komutu, izin verilen maksimum uzunluk olan 1024 karakteri aşamaz.",
+ "installCommandTooltip": "Bu uygulamayı yüklemek için kullanılan yükleme komut satırının tamamı.",
+ "runAs32Bit": "Yükleme ve kaldırma komutlarını 64 bit istemcilerde 32 bit işlemde çalıştır",
+ "runAs32BitTooltip": "Uygulamayı 64 bit istemcilerde 32 bit bir işlemde yüklemek ve kaldırmak için 'Evet' seçeneğini belirleyin. Uygulamayı 64 bit istemcilerde 64 bit bir işlemde yüklemek ve kaldırmak için 'Hayır' (varsayılan) seçeneğini belirleyin. 32 bit istemciler, her zaman 32 bit işlemi kullanır.",
+ "runAsAccount": "Yükleme davranışı",
+ "runAsAccountTooltip": "Destekleniyorsa, bu uygulamayı tüm kullanıcılara yüklemek için 'Sistem'i seçin. Uygulamayı cihazda oturum açmış kullanıcıya yüklemek için 'Kullanıcı'yı seçin. Çift amaçlı MSI uygulamalarında değişiklikler, uygulamanın asıl yüklemesinde uygulanan değer geri yüklenene kadar güncelleştirmelerin ve kaldırmaların tamamlanmasını önler.",
+ "selectorLabel": "Program",
+ "uninstallCommand": "Kaldırma komutu",
+ "uninstallCommandTooltip": "Bu uygulamayı kaldırmak için kullanılan kaldırma komut satırının tamamı."
+ },
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
},
- "Notification": {
- "additionalEmailLabel": "Diğerleri",
- "additionalRecipients": "Ek alıcılar (e-posta ile)",
- "additionalRecipientsBladeTitle": "Ek alıcı seç",
- "emailAddressPrompt": "E-posta adreslerini girin (virgül ile ayırarak)",
- "invalidEmail": "Geçersiz e-posta adresi",
- "messageTemplate": "İleti şablonu",
- "noneSelected": "Hiçbiri seçilmedi",
- "notSelected": "Seçili değil",
- "numSelected": "{0} seçildi",
- "selected": "Seçili"
- },
- "block": "Cihazı uyumsuz olarak işaretle",
- "lockDevice": "Cihazı kilitle (yerel eylem)",
- "lockDeviceWithPasscode": "Cihazı kilitle (yerel eylem)",
- "noAction": "Eylem yok",
- "noActionRow": "Eylem yok; bir eylem eklemek için 'Ekle'yi seçin",
- "pushNotification": "Son kullanıcıya anında iletme bildirimi gönder",
- "remoteLock": "Uyumsuz cihazı uzaktan kilitle",
- "removeSourceAccessProfile": "Kaynak erişim profilini kaldır",
- "retire": "Cihazı kullanımdan kaldırma listesine ekle",
- "wipe": "Silme",
- "emailNotification": "Son kullanıcıya e-posta gönder"
- },
- "InstallIntent": {
- "available": "Kayıtlı cihazlar için bulunur",
- "availableWithoutEnrollment": "Kayıtlı veya kayıtsız olarak kullanılabilir",
- "required": "Gerekli",
- "uninstall": "Kaldır"
- },
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Özel betik oluştur",
- "edit": "Özel betiği düzenle"
- },
- "basicInfo": "Yazdığınız algılama ve düzeltme betiklerinden yeni bir özel betik paketi oluşturun.",
- "customScriptCapitalized": "Özel betik",
- "customScriptLowercase": "özel betik",
- "detectionScript": "Algılama betiği"
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "PIN'de küçük harf kullanımına izin ver",
+ "notAllow": "PIN'de küçük harf kullanımına izin verme",
+ "requireAtLeastOne": "PIN'de en az bir küçük harf kullanılmasını gerektir"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "PIN'de özel karakter kullanımına izin ver",
+ "notAllow": "PIN'de özel karakter kullanımına izin verme",
+ "requireAtLeastOne": "PIN'de en az bir özel karakter kullanılmasını gerektir"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "PIN'de büyük harf kullanımına izin ver",
+ "notAllow": "PIN'de büyük harf kullanımına izin verme",
+ "requireAtLeastOne": "PIN'de en az bir büyük harf kullanılmasını gerektir"
+ }
+ },
+ "Autopilot": {
+ "AssignResourceAccount": {
+ "createNewCommandMenu": "Yeni oluştur",
+ "createNewResourceAccountInfo": "
\r\nKayıt sırasında yeni bir kaynak hesabı oluşturun. Kaynak hesabı, Kaynak hesabı tablosuna hemen eklenir, ancak cihaz kaydedilinceye ve Surface Hub aboneliği doğrulanıncaya kadar etkin olmaz. Kaynak Hesapları hakkında daha fazla bilgi edinin
\r\n ",
+ "createNewResourceTitle": "Yeni kaynak hesabı oluştur",
+ "deviceNameInvalid": "Cihaz adı geçersiz bir biçimde",
+ "deviceNameRequired": "Cihaz adı gerekiyor",
+ "editResourceAccountLabel": "Düzenle",
+ "selectExistingCommandMenu": "Mevcut olanı seç"
+ },
+ "Device": {
+ "ComputerName": {
+ "validFormat": "Adlar 15 karakter veya daha kısa olmalıdır ve harf (a-z, A-Z), sayı (0-9) ve kısa çizgi içerebilir. Adlar yalnızca sayı içeremez. Adlar boşluk içeremez."
+ },
+ "Header": {
+ "addressableUserName": "Kullanımı kolay ad",
+ "azureADDevice": "İlişkili Microsoft Entra cihazı",
+ "batch": "Grup etiketi",
+ "dateAssigned": "Atama tarihi",
+ "deviceAccountPwd": "Cihaz hesabı şifresi",
+ "deviceAccountUpn": "Cihaz hesabı",
+ "deviceDisplayName": "Cihaz adı",
+ "deviceFriendlyName": "Cihaz kolay adı",
+ "deviceName": "Cihaz adı",
+ "deviceUseType": "Cihaz kullanım türü",
+ "enrollmentState": "Kayıt durumu",
+ "intuneDevice": "İlişkili Intune cihazı",
+ "lastContacted": "Son iletişim",
+ "make": "Üretici",
+ "model": "Model",
+ "profile": "Atanan profil",
+ "profileStatus": "Profil durumu",
+ "purchaseOrderId": "Satın alma siparişi",
+ "resourceAccount": "Kaynak hesabı",
+ "serialNumber": "Seri numarası",
+ "userPrincipalName": "Kullanıcı"
+ },
+ "SurfaceHub": {
+ "friendlyNameRequired": "Kolay bir ad gereklidir",
+ "pwdRequired": "Parola gereklidir",
+ "pwdValidFormat": "Parola güncelleştirilemiyor. Yeni parola için sağlanan değer etki alanının uzunluk veya karmaşıklık gereksinimlerini karşılamıyor.",
+ "upnRequired": "Bir cihaz hesabı gerekiyor.",
+ "upnValidFormat": "Değerler harfler (a-z, A-Z), sayılar (0-9) ve kısa çizgiler içerebilir. Değerler boşluk içeremez."
+ }
+ },
+ "DeviceUseType": {
+ "meetingAndPresentation": "Toplantı ve sunum",
+ "teamCollaboration": "Ekip işbirliği"
+ },
+ "Devices": {
+ "featureDescription": "Windows Autopilot, kullanıcılarınız için ilk kez çalıştırma deneyimini (OOBE) özelleştirmenize olanak tanır.",
+ "importErrorStatus": "Bazı cihazlar içeri aktarılamadı. Daha fazla bilgi için buraya tıklayın.",
+ "importPendingStatus": "İçeri aktarma sürüyor. Geçen süre: {0} dk. Bu işlem {1} dakikaya kadar sürebilir."
+ },
+ "DirectoryService": {
+ "activeDirectoryAD": "Microsoft Entra hibrite katılmış",
+ "activeDirectoryADLabel": "Autopilot ile Microsoft Entra hibrit katılımı",
+ "azureAD": "Microsoft Entra’ya katılmış",
+ "unknownType": "Bilinmeyen Tür"
+ },
+ "Filter": {
+ "enrollmentState": "Durum",
+ "profile": "Profil durumu"
+ },
+ "OOBE": {
+ "AddressableUserName": {
+ "validateEmpty": "Kullanıcı kolay adı boş olamaz."
+ },
+ "ApplyComputerNameTemplate": {
+ "infoBalloon": "Kayıt sırasında cihazlarınıza ad eklemek için bir adlandırma şablonu oluşturun.",
+ "label": "Cihaz adı şablonu uygula"
+ },
+ "ApplyComputerNameTemplateDisabled": {
+ "label": "Microsoft Entra ile katılan türdeki Autopilot dağıtım profillerinde cihazlar, Etki Alanı Katılımı yapılandırmasında belirtilen ayarlar kullanılarak yapılandırılır."
+ },
+ "ComputerNameTemplate": {
+ "emptyValue": "MyCompany-%RAND:4%",
+ "label": "Bir ad girin",
+ "noDisallowedChars": "Ad yalnızca alfasayısal karakterler, kısa çizgi, %SERIAL% veya %RAND:x içermelidir",
+ "serialLength": "%SERIAL% ile 7'den fazla karakter kullanılamaz",
+ "validateLessThan15Chars": "Ad, 15 karakter veya daha kısa olmalıdır",
+ "validateNoSpaces": "Bilgisayar adları boşluk içeremez",
+ "validateNotAllNumbers": "Ad ayrıca harf ve/veya kısa çizgi içermelidir",
+ "validateNotEmpty": "Ad boş olamaz",
+ "validateOnlyOneMacro": "Ad, %SERIAL% veya %RAND:x% makrolarından yalnızca birini içermelidir"
+ },
+ "ConfigureComputerNameTemplate": {
+ "description": "Cihazlarınız için benzersiz bir ad oluşturun. Ad en fazla 15 karakter olmalıdır ve harf (a-z, A-Z), sayı (0-9) ve kısa çizgi içerebilir. Ad yalnızca sayıdan oluşamaz ve boşluk içeremez. Donanıma özgü bir seri numarası eklemek için %SERIAL% makrosunu kullanın. Alternatif olarak rastgele bir sayı dizesi eklemek için x değişkeninin basamak sayısına eşit olduğu %RAND:x% makrosunu kullanın."
+ },
+ "EnableWhiteGlove": {
+ "infoBalloon": "Cihazı kaydetmek ve sistem bağlamındaki tüm uygulama ve ayarları sağlamak amacıyla OOBE'yi kullanıcı kimlik doğrulaması olmadan çalıştırmak için Windows tuşuna 5 kere basmayı etkinleştirin. Kullanıcı bağlamı uygulama ve ayarlar, kullanıcı oturum açtığında teslim edilir.",
+ "label": "Önceden sağlanan dağıtıma izin ver"
+ },
+ "HybridAzureADSkipConnectivityCheck": {
+ "infoBalloon": "Autopilot Microsoft Entra hibrit katılma akışı, OOBE sırasında etki alanı denetleyicisi bağlantısı oluşturmasa bile devam eder.",
+ "label": "AD bağlantı denetimini atla"
+ },
+ "accountType": "Kullanıcı hesabı türü",
+ "accountTypeInfo": "Cihazdaki kullanıcıların yönetici mi yoksa standart kullanıcı mı olduğunu belirtin. Bu ayarın Genel Yönetici veya Şirket Yöneticisi hesaplarına uygulanmadığını unutmayın. Bu hesaplar, Microsoft Entra Kimliği'ndeki tüm yönetici özelliklerine erişebileceği için standart kullanıcılar atanamaz.",
+ "configOOBEInfo": "
\r\nAutopilot cihazlarınızın ilk kez kullanım deneyimini yapılandırın\r\n
",
+ "configureDevice": "Dağıtım modu",
+ "configureDeviceHintForSurfaceHub2": "Autopilot, Surface Hub 2 için yalnızca kendi kendine dağıtım modunu destekler. Bu mod, kullanıcıyı kayıtlı cihazla ilişkilendirmediğinden kullanıcı kimlik bilgilerini gerektirmez.",
+ "configureDeviceHintForWindowsPC": "
\r\n Dağıtım modu, bir kullanıcının cihaz sağlamak için kimlik bilgilerini girmesi gerekip gerekmediğini belirler.\r\n
\r\n
\r\n
\r\n Kullanıcı Temelli: Cihazlar, cihazı kaydeden kullanıcıyla ilişkilendirilir ve cihazın sağlanması için kullanıcı kimlik bilgileri gereklidir\r\n
\r\n
\r\n Otomatik dağıtım (önizleme): Cihazlar, cihazı kaydeden kullanıcıyla ilişkilendirilmez ve cihazın sağlanması için kullanıcı kimlik bilgileri gerekli değildir\r\n
\r\n
",
+ "createSurfaceHub2Info": "Surface Hub 2 cihazlarınız için Autopilot kayıt ayarlarını yapılandırın. Autopilot'ta ilk kez çalıştırma deneyimi sırasında kullanıcı kimliğini doğrulamayı atlama varsayılan olarak etkindir. Surface Hub 2 için Windows Autopilot hakkında daha fazla bilgi edinin.",
+ "createWindowsPCInfo": "\r\n
\r\nKendi kendine dağıtım modunda Autopilot cihazları için şu seçenekler otomatik olarak etkinleştirilir:\r\n
\r\n
\r\n
\r\n İş veya Ev kullanımı seçimini atla\r\n
\r\n
\r\n OEM kaydını ve OneDrive yapılandırmasını atla\r\n
",
+ "endUserDevice": "Kullanıcı Temelli",
+ "hideEscapeLink": "Hesabı değiştirme seçeneklerini gizle",
+ "hideEscapeLinkInfo": "Hesabı değiştirme ve farklı bir hesapla yeniden başlama seçenekleri, sırasıyla şirket oturum açma sayfasında ve etki alanı hata sayfasında ilk cihaz kurulumu sırasında görüntülenir. Bu seçenekleri gizlemek için Microsoft Entra Kimliği'nde şirket markasını yapılandırmanız gerekir (Windows 10, 1809 ve üzeri bir sürüm veya Windows 11 gerektirir).",
+ "info": "Autopilot profili ayarları, kullanıcıların Windows'u ilk kez başlattığında göreceği ilk çalıştırma deneyimini tanımlar.",
+ "language": "Dil (Bölge)",
+ "languageInfo": "Kullanılacak dili ve bölgeyi belirtin.",
+ "licenseAgreement": "Microsoft Yazılım Lisans Koşulları",
+ "licenseAgreementInfo": "EULA'nın kullanıcılara gösterilip gösterilmeyeceğini belirtin.",
+ "plugAndForgetDevice": "Kendi Kendine Dağıtılıyor",
+ "privacySettingWarning": "Windows 10, sürüm 1903 ve sonraki sürümleri veya Windows 11’i çalıştıran cihazlarda, tanılama verilerinin toplanmasına ilişkin varsayılan değer değişti. ",
+ "privacySettings": "Gizlilik ayarları",
+ "privacySettingsInfo": "Gizlilik ayarlarının kullanıcılara gösterilip gösterilmeyeceğini belirtin.",
+ "showCortanaConfigurationPage": "Cortana yapılandırması",
+ "showCortanaConfigurationPageInfo": "Göster seçeneği, başlangıçta Cortana yapılandırma girişini etkinleştirir.",
+ "skipEULAWarning": "Lisans koşullarını gizleme hakkında önemli bilgiler",
+ "skipKeyboardSelection": "Klavyeyi otomatik olarak yapılandırma",
+ "skipKeyboardSelectionInfo": "True değerindeyse Dil ayarlı olduğunda klavye seçimi sayfasını atlayın.",
+ "subtitle": "Autopilot profilleri",
+ "title": "İlk çalıştırma deneyimi (OOBE)",
+ "useOSDefaultLanguage": "İşletim sistemi varsayılanı",
+ "userSelect": "Kullanıcı seçimi"
},
+ "Sync": {
+ "lastRequestedLabel": "Son eşitleme isteği",
+ "lastSuccessfulLabel": "Son başarılı eşitleme",
+ "syncInProgress": "Eşitleme sürüyor. En kısa zamanda tekrar gelin.",
+ "syncInitiated": "Autopilot ayarları eşitlemesi başlatıldı.",
+ "syncSettingsTitle": "Autopilot ayarlarını eşitle"
+ },
+ "Title": {
+ "devices": "Windows Autopilot cihazları"
+ },
+ "Tooltips": {
+ "addressableUserName": "Cihaz kurulumu sırasında görüntülenen karşılama adı.",
+ "azureADDevice": "İlişkili cihaz için cihaz ayrıntılarına gidin. Yok, ilişkili cihaz olmadığını gösterir.",
+ "batch": "Bir cihaz grubunu tanımlamak için kullanılabilen bir dize özniteliği. Intune'un Grup Etiketi alanı, Microsoft Entra cihazlarındaki OrderID özniteliğine eşlenir.",
+ "dateAssigned": "Profilin cihaza atandığı tarihin zaman damgası.",
+ "deviceAccountPwd": "Surface Hub cihazları için cihaz hesabı parolası. Bu bilgi girildiyse cihaz hesabını ve kolay adı da girin.",
+ "deviceAccountUpn": "Surface Hub cihazları için cihaz hesabı e-posta adresi. Bu bilgi girildiyse cihaz hesabı parolasını ve kolay adı da girin.",
+ "deviceDisplayName": "Bir cihaz için benzersiz bir ad yapılandırın. Bu ad, Microsoft Entra hibrit ile katılan dağıtımlarda yok sayılacak. Cihaz adı, Microsoft Entra hibrit cihazları için hala etki alanı katılım profilinden gelir.",
+ "deviceFriendlyName": "Surface Hub cihazları için kolay ad. Bu bilgi girildiyse cihaz hesabını ve cihaz hesabı parolasını da girin.",
+ "deviceName": "Kullanıcı, cihazı bulmaya ve bu cihaza bağlanmaya çalışırken görüntülenen ad.",
+ "deviceUseType": " Cihaz, seçiminize bağlı olarak ayarlanır. Daha sonra her zaman Ayarlar'dan değişiklik yapabilirsiniz.\r\n
\r\n
Toplantılar ve sunular için, Windows Hello açık değildir ve her oturumdan sonra veriler kaldırılır.\r\n
\r\n
Ekip işbirliği için, Windows Hello açıktır ve profiller hızlı oturum açma için kaydedilir
\r\n
",
+ "enrollmentState": "Cihazın kaydolup kaydolmadığını belirtir.",
+ "intuneDevice": "İlişkili cihaz için cihaz ayrıntılarına gidin. Yok, ilişkili cihaz olmadığını gösterir.",
+ "lastContacted": "Cihazla son bağlantı kurulan tarihin zaman damgası.",
+ "make": "Seçilen cihazın üreticisi.",
+ "model": "Seçilen cihazın modeli",
+ "profile": "Cihaza atanmış profilin adı.",
+ "profileStatus": "Cihazın profile atanıp atanmadığını belirtir.",
+ "purchaseOrderId": "Satın alma sipariş kimliği",
+ "resourceAccount": "Cihazın kimliği veya kullanıcı asıl adı (UPN).",
+ "serialNumber": "Seçilen cihazın seri numarası.",
+ "userPrincipalName": "Cihazın kurulumu sırasında kullanıcı, kimlik doğrulama bilgisini önceden dolduracaktır."
+ },
+ "allDevices": "Tüm cihazlar",
+ "allDevicesAlreadyAssignedError": "Tüm Cihazlara zaten bir Autopilot profili atandı.",
+ "assignFailedDescription": "{0} için atamalar güncelleştirilemedi.",
+ "assignFailedTitle": "Autopilot profil atamaları güncelleştirilemedi.",
+ "assignSuccessDescription": "{0} atamaları başarıyla güncelleştirildi.",
+ "assignSuccessTitle": "Autopilot profil atamaları başarıyla güncelleştirildi.",
+ "assignSufaceHub2ProfileNextStep": "Bu dağıtım için sonraki adımlar",
+ "assignSurfaceHub2ProfileToDeviceGroup": "1. Bu profili en az bir cihaz grubuna atayın",
+ "assignSurfaceHub2ProfileToResourceAccount": "2. Bu profili dağıttığınız her Surface Hub cihazına bir kaynak hesabı atayın",
+ "assignedDevicesCount": "Atanan cihazlar",
+ "assignedDevicesResourceAccountDescription": "
Bu profilin bir cihaza dağıtılması için cihaza bir Kaynak hesabı atamanız gerekir. Mevcut bir Kaynak hesabını atamak veya yeni bir hesap oluşturmak için tek seferde bir cihaz seçin. Kaynak hesapları hakkında daha fazla bilgi edinin
",
+ "assignedDevicesResourceAccountStatusBarMessage": "Bu tablo yalnızca bu profile atanmış olan Surface Hub 2 cihazlarını listeler.",
+ "assigningDescription": "{0} atamaları güncelleştiriliyor.",
+ "assigningTitle": "Autopilot profil atamaları güncelleştiriliyor.",
+ "autoremediationContext": "Bu cihazda bir donanım değişikliği algılandı. Yeni donanım otomatik olarak kaydedilmeye çalışılıyor. Şu anda bir şey yapmanız gerekmez. Durum, sonuçla birlikte bir sonraki iadede güncelleştirilecek. Profili sıfırlama hakkında daha fazla bilgi edinin.",
+ "autoremediationTitle": "{0} cihazının bekleyen bir düzeltmesi var",
+ "cannotDeleteMessage": "Bu profil gruplara atanmış. Silmek için önce bu profilden tüm grupların atamasını kaldırmanız gerekir.",
+ "cannotDeleteTitle": "{0} silinemiyor",
+ "createdDateTime": "Oluşturuldu",
+ "deleteMessage": "Bu Autopilot profilini silerseniz bu profile atanmış tüm cihazlar Atanmamış olarak görüntülenir.",
+ "deleteMessageWithPolicySet": "{0} bir veya daha fazla ilke kümesine eklenmiş. {0} öğesini silerseniz, bu öğeyi artık bu ilke kümeleri aracılığıyla atayamazsınız.",
+ "deleteTitle": "Bu profili silmek istediğinizden emin misiniz?",
+ "description": "Açıklama",
+ "deviceType": "Cihaz türü",
+ "deviceUse": "Cihaz kullanımı",
+ "directoryServiceHintForSurfaceHub2": "
\r\n Autopilot, Surface Hub 2 cihazları için yalnızca Microsoft Entra'ya Katılmış olarak desteklenir. Cihazların kuruluşunuzda Active Directory'ye (AD) katılma yöntemini belirtin.\r\n
\r\n
\r\n
\r\n Microsoft Entra'ya katılmış: Şirket içi Windows Server Active Directory olmadan yalnızca bulut.\r\n
\r\n Cihazların kuruluşunuzda Active Directory'ye (AD) nasıl katıldığını belirtin:\r\n
\r\n
\r\n
\r\n Microsoft Entra'ya katılmış: Şirket içi Windows Server Active Directory olmadan yalnızca bulutta\r\n
\r\n
\r\n ",
+ "getAssignedDevicesCountError": "Atanan cihaz sayısı getirilirken bir hata oluştu.",
+ "getAssignmentsError": "Autopilot profil atamaları getirilirken bir hata oluştu.",
+ "harvestDeviceId": "Hedeflenen tüm cihazları Autopilot'a dönüştür",
+ "harvestDeviceIdDescription": "Bu profil, varsayılan olarak yalnızca Autopilot hizmetinden eşitlenen Autopilot cihazlarına uygulanabilir.",
+ "harvestDeviceIdInfo": "\r\n Zaten kayıtlı değillerse, hedeflenen tüm cihazları Autopilot'a kaydetmek için Evet'i seçin. Kayıtlı cihazlar, bir sonraki Windows İlk Kez Çalıştırma Deneyimi'nden (OOBE) geçişlerinde, atanan Autopilot senaryosunu tamamlar.\r\n \r\n Bazı Autopilot senaryoları için belirli en düşük Windows derlemelerinin gerektiğini lütfen unutmayın. Lütfen cihazınızda senaryoyu tamamlamak için gereken minimum derlemenin bulunduğundan emin olun.\r\n \r\n Bu profili kaldırdığınızda, etkilenen cihazlar Autopilot'tan kaldırılmaz. Bir cihazı Autopilot'tan kaldırmak için Windows Autopilot Cihazları görünümünü kullanın.\r\n ",
+ "harvestDeviceIdWarning": "Dönüşümden sonra Autopilot cihazları yalnızca Autopilot cihazları listesinden silinerek geri döndürülebilir.",
+ "holoLensCommandMenu": "HoloLens",
+ "info": "Windows Autopilot dağıtım profilleri cihazlarınızın ilk çalıştırma deneyimini özelleştirmenize olanak sağlar.",
+ "invalidProfileNameMessage": "\"{0}\" karakterine izin verilmiyor",
+ "joinTypeLabel": "Microsoft Entra Kimliği’ne katılım türü:",
+ "lastModifiedDateTime": "Son değiştirme:",
+ "manualRemediationContext": "Bu cihazda bir donanım değişikliği algılandı. Cihazı yeniden kaydetmediğiniz sürece sıfırlandığında otomatik olarak bir Autopilot profili almaz. Profili sıfırlama hakkında daha fazla bilgi edinin.",
+ "manualRemediationTitle": "{0} cihazıyla ilgilenmeniz gerekiyor",
+ "name": "Ad",
+ "noAutopilotProfile": "Autopilot profili yok",
+ "notEnoughPermissionAssignedError": "Bu profili seçili gruplarınızdan en az birine atamak için yeterli izniniz yok. Lütfen yöneticinize başvurun.",
+ "profile": "profil",
+ "resourceAccountStatusBarMessage": "Bu profilin dağıtıldığı her Surface Hub 2 cihazı için bir Kaynak Hesabı gerekir. Daha fazla bilgi için tıklayın.",
+ "selectServices": "Cihazların katılacağı dizin hizmetini seçin",
+ "surfaceHub2CommandMenu": "Surface Hub 2",
+ "surfaceHub2SCommandMenu": "Surface Hub 2S",
+ "userAffinityLabel": "Dağıtım modu",
+ "windowsPCCommandMenu": "Windows Kişisel Bilgisayarı",
+ "directoryServiceLabel": "Microsoft Entra Kimliği’ne katılım türü:"
+ },
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Yönetilen cihazlar",
+ "devicesWithoutEnrollment": "Yönetilen uygulamalar"
+ },
+ "AppProtection": {
+ "allAppTypes": "Tüm uygulama türlerini hedefle",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Android İş Profilindeki Uygulamalar",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Microsoft Entra Paylaşılan Moduna Sahip Android Enterprise Ayrılmış Cihazlarındaki Uygulamalar",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Android Açık Kaynak Projesi Kullanıcı İlişkili Uygulamalar",
+ "appsOnAndroidOpenSourceProjectUserless": "Android Açık Kaynak Projesindeki Uygulamalar Kullanıcısız",
+ "appsOnIntuneManagedDevices": "Intune yönetilen cihazlardaki uygulamalar",
+ "appsOnUnmanagedDevices": "Yönetilmeyen cihazlardaki uygulamalar",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Kullanılamaz",
+ "windows10PlatformLabel": "Windows 10 ve sonraki sürümler",
+ "withEnrollment": "Kayıt ile",
+ "withoutEnrollment": "Kayıt olmadan"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Proje Çevrimiçi Masaüstü İstemcisi",
+ "visioProRetail": "Visio Çevrimiçi Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "{0} silinemedi",
+ "failureCa": "Sertifika yetkilisi ilkeleri tarafından başvurulduğundan {0} silinemedi",
+ "modifying": "{0} siliniyor",
+ "success": "{0} başarıyla silindi"
+ },
+ "Notify": {
+ "failure": "{0} güncelleştirilemedi",
+ "modifying": "{0} değiştiriliyor",
+ "success": "{0} başarıyla güncelleştirildi"
+ },
+ "menuLabel": "Kimlik doğrulaması bağlamı"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Federasyon sağlayıcıları tarafından yerine getirilen kimlik doğrulama yöntemleri gerektirme hakkında daha fazla bilgi edinin.",
+ "certificate": "Sertifika kimlik doğrulaması",
+ "infoBubble": "ADFS gibi Federasyon sağlayıcısı tarafından karşılanması gereken, gerekli kimlik doğrulama yöntemini belirtin.",
+ "multifactor": "Çok faktörlü kimlik doğrulaması",
+ "require": "Federasyon kimlik doğrulama yöntemi gerektir (Önizleme)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Kalıcı tarayıcı oturumu ilkesi yalnızca \"Tüm bulut uygulamaları\" seçildiğinde doğru şekilde çalışır. Lütfen bulut uygulamaları seçiminizi güncelleştirin."
+ },
+ "Option": {
+ "always": "Her zaman kalıcı",
+ "help": "Kalıcı tarayıcı oturumu, kullanıcılar tarayıcı pencerelerini kapatıp açtıklarında oturumlarının açık kalmasını sağlar. \n
\n
Bu ayar \"Tüm bulut uygulamaları\" seçildiğinde doğru çalışır
\n
Bu, belirteç ömürlerini veya oturum açma sıklığı ayarını etkilemez.
\n
Bu, Şirket Markasında \"Oturumun açık kalması seçeneğini göster\" ayarını geçersiz kılar.
\n
\"Asla kalıcı yapma\", şirket dışı kimlik doğrulaması hizmetlerinden geçirilen tüm kalıcı SSO taleplerini geçersiz kılar.
\n
\"Asla kalıcı yapma\", uygulamalarda ve uygulamalar ile kullanıcının mobil tarayıcısı arasında mobil cihazlardaki SSO'yu engeller.
\n",
+ "label": "Kalıcı tarayıcı oturumu",
+ "never": "Asla kalıcı yapma"
+ },
+ "Warning": {
+ "allApps": "Kalıcı tarayıcı oturumu yalnızca Tüm bulut uygulamaları seçildiğinde doğru şekilde çalışır. Lütfen bulut uygulamaları seçiminizi değiştirin. Daha fazla bilgi edinmek için buraya tıklayın."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Saatler veya günler",
+ "value": "Sıklık"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} gün",
+ "singular": "1 gün"
+ },
+ "Hour": {
+ "plural": "{0} saat",
+ "singular": "1 saat"
+ },
+ "daysOption": "Gün",
+ "everytime": "Her seferinde",
+ "help": "Kullanıcının bir kaynağa erişmeye çalışırken tekrar oturum açmasının istenmesi için geçmesi gereken süre. Varsayılan ayar 90 günlük bir hareketli zaman aralığıdır, yani en az 90 gün boyunca makinelerinde etkin olmayan kullanıcılardan, bu süre sonunda bir kaynağa ilk kez erişmeyi denediklerinde kimliklerini yeniden doğrulamaları istenir.",
+ "hoursOption": "Saat",
+ "label": "Oturum açma sıklığı",
+ "placeholder": "Birim seçin"
+ }
+ },
+ "mainOption": "Oturum ömrünü değiştir",
+ "mainOptionHelp": "Kullanıcılara ne sıklıkta istemde bulunulacağını ve tarayıcı oturumlarının kalıcı olup olmayacağını yapılandırın. Modern kimlik doğrulaması protokollerini desteklemeyen uygulamalar bu ilkelere uymayabilir. Bu gibi durumlarda lütfen uygulama geliştiricisine başvurun."
+ },
+ "SingleSelectorActive": {
+ "failed": "Bu veriler yüklenemiyor.",
+ "reattempt": "Veriler yükleniyor. Yeniden deneme {0} / {1}."
+ },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Dizin rollerini seçin"
+ },
+ "Excluded": {
+ "gridAria": "Hariç tutulan kullanıcıların listesi"
+ },
+ "Included": {
+ "gridAria": "Dahil edilen kullanıcıların listesi"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Dizin Rolleri\" en az bir özel rol içerir",
+ "customRoleSelected": "En az bir özel rol seçildi",
+ "failed": "\"{0}\" yapılandırılmalıdır",
+ "roles": "En az bir rol seçin",
+ "usersGroups": "En az bir kullanıcı veya grup seçin"
+ },
+ "learnMore": "Kullanıcılar ve gruplar, iş yükü kimlikleri, dizin rolleri veya dış konuklar gibi ilkenin kime uygulanacağına bağlı olarak erişimi denetleyin."
+ },
+ "advancedTabText": "Gelişmiş",
+ "allCloudAppsErrorBox": "\"Parola değişikliği iste\" izni seçildiğinde \"Tüm bulut uygulamaları\" seçilmelidir",
+ "allCloudAppsReauth": "\"Oturum açma sıklığı her seferinde\" oturum denetimi ve \"oturum açma riski\" koşulu seçildiğinde \"Tüm bulut uygulamaları\" seçilmelidir",
+ "allCloudOrSpecificApps": "\"Her seferinde oturum açma sıklığı\" oturum denetimi için \"tüm bulut uygulamaları\" veya özellikle desteklenen uygulamalar seçilmelidir",
+ "allDayCheckboxLabel": "Tüm gün",
+ "allDevicePlatforms": "Herhangi bir aygıt",
+ "allGuestUserInfoContent": "Microsoft Entra B2B konuklarını içerir, SharePoint B2B konuklarını içermez",
+ "allGuestUserLabel": "Tüm konuk ve dış kullanıcılar",
+ "allRiskLevelsOption": "Tüm risk düzeyleri",
+ "allTrustedLocationLabel": "Tüm güvenilen konumlar",
+ "allUserGroupSetSelectorLabel": "Seçilen tüm kullanıcılar ve gruplar",
+ "allUsersReauth": "\"Her seferinde oturum açma sıklığı\" oturum denetimi için \"Tüm Kullanıcılar\" seçeneği belirlenmelidir",
+ "allUsersString": "Tüm kullanıcılar",
+ "and": "{0} VE {1} ",
+ "andWithGrouping": "({0}) VE {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Herhangi bir bulut uygulaması",
+ "appContextOptionInfoContent": "İstenen kimlik doğrulaması etiketi",
+ "appContextOptionLabel": "İstenen kimlik doğrulama etiketi (Önizleme)",
+ "appContextUriPlaceholder": "Örnek: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "Uygulama tarafından zorlanan kısıtlamalar, bulut uygulamaları içinde ek yönetim yapılandırmaları gerektirebilir. Kısıtlamalar yalnızca yeni oturumlar için geçerli olur.",
+ "appNotSetSeletorLabel": "0 bulut uygulaması seçili",
+ "appReauthNotSupported": "Bu uygulama “her zaman oturum açma sıklığı” oturum denetimini desteklemez.",
+ "applyConditionClientAppInfoBalloonContent": "Belirli istemci uygulamalarında ilkeyi uygulamak için istemci uygulamalarını yapılandırın",
+ "applyConditionDevicePlatformInfoBalloonContent": "Belirli platformlarda ilkeyi uygulamak için cihaz platformlarını yapılandırın",
+ "applyConditionDeviceStateInfoBalloonContent": "Belirli cihaz durumlarına ilkeyi uygulamak için cihaz durumlarını yapılandırın",
+ "applyConditionLocationInfoBalloonContent": "Güvenilen/güvenilmeyen konumlarda ilkeyi uygulamak için konumları yapılandırın",
+ "applyConditionSigninRiskInfoBalloonContent": "Seçili risk düzeylerinde ilkeyi uygulamak için, oturum açma riskini yapılandırın",
+ "applyConditionUserRiskInfoBalloonContent": "İlkeyi seçili risk düzeylerine uygulamak için kullanıcı riskini yapılandırın",
+ "applyConditonLabel": "Yapılandır",
+ "ariaLabelPolicyDisabled": "İlke devre dışı",
+ "ariaLabelPolicyEnabled": "İlke etkin",
+ "ariaLabelPolicyReportOnly": "İlke Yalnızca rapor modunda",
+ "blockAccess": "Erişimi engelle",
+ "builtInDirectoryRoleLabel": "Yerleşik dizin rolleri",
+ "casCustomControlInfo": "Özel ilkelerin Cloud App Security portalında yapılandırılması gerekir. Bu denetim öne çıkan uygulamalar için anında çalışır ve herhangi bir uygulama için kendi kendine eklenebilir. Her iki senaryo hakkında daha fazla bilgi edinmek için buraya tıklayın.",
+ "casInfoBubble": "Bu denetim çeşitli bulut uygulamaları için çalışır.",
+ "casPreconfiguredControlInfo": "Bu denetim öne çıkan uygulamalar için anında çalışır ve herhangi bir uygulama için kendi kendine eklenebilir. Her iki senaryo hakkında daha fazla bilgi edinmek için buraya tıklayın.",
+ "cert64DownloadCol": "Base64 sertifikasını indir",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Sertifikayı indir",
+ "certDurationCol": "Süre Sonu",
+ "certDurationStartCol": "Şu tarihten itibaren geçerli",
+ "certName": "VpnCert",
+ "certainApps": "\"Çok faktörlü kimlik doğrulaması gerektir\" ve \"Parola değişikliği gerektir\" izinleri seçilmezse \"Her seferinde oturum açma sıklığı\" için yalnızca belirli uygulamalar desteklenir",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Uygulama Seçin",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Seçilen Uygulamalar",
+ "chooseApplicationsEmpty": "Uygulama Yok",
+ "chooseApplicationsNone": "Yok",
+ "chooseApplicationsNoneFound": "\"{0}\" ifadesini bulamadık. Başka bir ad veya kimlik deneyin.",
+ "chooseApplicationsPlural": "{0} ve {1} uygulama daha",
+ "chooseApplicationsReAuthEverytimeInfo": "Uygulamanızı mı arıyorsunuz? Bazı uygulamalar “Yeniden kimlik doğrulaması gerektir - her seferinde” oturum denetimi ile kullanılamaz",
+ "chooseApplicationsRemove": "Kaldır",
+ "chooseApplicationsReturnedPlural": "{0} uygulama bulundu",
+ "chooseApplicationsReturnedSingular": "1 uygulama bulundu",
+ "chooseApplicationsSearchBalloon": "Adını veya kimliğini girerek bir Uygulama arayın.",
+ "chooseApplicationsSearchHint": "Uygulamalarda Ara...",
+ "chooseApplicationsSearchLabel": "Uygulamalar",
+ "chooseApplicationsSearching": "Aranıyor...",
+ "chooseApplicationsSelect": "Seç",
+ "chooseApplicationsSelected": "Seçili",
+ "chooseApplicationsSingular": "{0} ve 1 uygulama daha",
+ "chooseApplicationsTooMany": "Görüntülenen sonuçlardan daha fazlası bulundu. Lütfen arama kutusunu kullanarak filtreleyin.",
+ "chooseLocationCorpnetItem": "Şirket ağı",
+ "chooseLocationSelectedLocationsLabel": "Seçili konumlar",
+ "chooseLocationTrustedIpsItem": "Çok faktörlü kimlik doğrulaması güvenilen IP'leri",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Konum Seçin",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Seçili Konumlar",
+ "chooseLocationsEmpty": "Konum Yok",
+ "chooseLocationsExcludedSelectorTitle": "Seçin",
+ "chooseLocationsIncludedSelectorTitle": "Seçin",
+ "chooseLocationsNone": "Yok",
+ "chooseLocationsNoneFound": "\"{0}\" ifadesini bulamadık. Başka bir ad veya kimlik deneyin.",
+ "chooseLocationsPlural": "{0} ve {1} uygulama daha",
+ "chooseLocationsRemove": "Kaldır",
+ "chooseLocationsReturnedPlural": "{0} konum bulundu",
+ "chooseLocationsReturnedSingular": "1 konum bulundu",
+ "chooseLocationsSearchBalloon": "Adını girerek bir Konum arayın.",
+ "chooseLocationsSearchHint": "Konum Arayın...",
+ "chooseLocationsSearchLabel": "Konumlar",
+ "chooseLocationsSearching": "Aranıyor...",
+ "chooseLocationsSelect": "Seçin",
+ "chooseLocationsSelected": "seçili",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Seçin",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Seçin",
+ "chooseLocationsSingular": "{0} ve 1 uygulama daha",
+ "chooseLocationsTooMany": "Görüntülenen sonuçlardan daha fazlası bulundu. Lütfen arama kutusunu kullanarak filtreleyin.",
+ "claimProviderAddCommandText": "Yeni özel denetim",
+ "claimProviderAddNewBladeTitle": "Yeni özel denetim",
+ "claimProviderDeleteCommand": "Sil",
+ "claimProviderDeleteDescription": "'{0}' adlı ağı silmek istediğinizden emin misiniz? Bu eylem geri alınamaz.",
+ "claimProviderDeleteTitle": "Emin misiniz?",
+ "claimProviderEditInfoText": "Talep sağlayıcılarınız tarafından verilen özelleştirilmiş denetimler için JSON girin.",
+ "claimProviderNotificationCreateDescription": "'{0}' adlı özel denetim oluşturuluyor",
+ "claimProviderNotificationCreateFailedDescription": "'{0}' özel denetimi oluşturulamadı. Lütfen daha sonra yeniden deneyin.",
+ "claimProviderNotificationCreateFailedTitle": "Özel denetim oluşturulamadı",
+ "claimProviderNotificationCreateSuccessDescription": "'{0}' adlı özel denetim oluşturuldu",
+ "claimProviderNotificationCreateSuccessTitle": "'{0}' oluşturuldu",
+ "claimProviderNotificationCreateTitle": "'{0}' oluşturuluyor",
+ "claimProviderNotificationDeleteDescription": "'{0}' adlı özel denetim siliniyor",
+ "claimProviderNotificationDeleteFailedDescription": "'{0}' özel denetimi silinemedi. Lütfen daha sonra yeniden deneyin.",
+ "claimProviderNotificationDeleteFailedTitle": "Özel denetim silinemedi",
+ "claimProviderNotificationDeleteSuccessDescription": "'{0}' adlı özel denetim silindi",
+ "claimProviderNotificationDeleteSuccessTitle": "'{0}' silindi",
+ "claimProviderNotificationDeleteTitle": "{0} siliniyor",
+ "claimProviderNotificationUpdateDescription": "'{0}' adlı özel denetim güncelleştiriliyor",
+ "claimProviderNotificationUpdateFailedDescription": "'{0}' özel denetimi güncelleştirilemedi. Lütfen daha sonra yeniden deneyin.",
+ "claimProviderNotificationUpdateFailedTitle": "Özel denetim güncelleştirilemedi",
+ "claimProviderNotificationUpdateSuccessDescription": "'{0}' adlı özel denetim güncelleştirildi",
+ "claimProviderNotificationUpdateSuccessTitle": "'{0}' güncelleştirildi",
+ "claimProviderNotificationUpdateTitle": "'{0}' güncelleştiriliyor",
+ "claimProviderValidationAppIdInvalid": "\"AppId\" değeri geçerli değil. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationClientIdMissing": "Veriler \"ClientId\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationControlClaimsRequestedMissing": "\"Control\" bir \"ClaimsRequested\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "\"ClaimsRequested\" öğesi bir \"Type\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationControlIdAlreadyExists": "\"Control\" \"Id\" değeri zaten var. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationControlIdMissing": "\"Control\" bir \"Id\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "\"Control\" \"Id\" değerine mevcut ilkede başvurulduğundan bu değer kaldırılamıyor. Lütfen öncelikle bu değeri ilkeden kaldırın.",
+ "claimProviderValidationControlIdTooManyControls": "\"Control\" özelliği çok fazla denetim içeriyor. Lütfen gözden geçirip tekrar deneyin.",
+ "claimProviderValidationControlIdValueReserved": "\"Control\" \"Id\" değeri, ayrılmış bir anahtar sözcük. Lütfen farklı bir kimlik kullanın.",
+ "claimProviderValidationControlNameAlreadyExists": "\"Control\" \"Name\" değeri zaten var. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationControlNameMissing": "\"Control\" bir \"Name\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationControlsMissing": "Veriler \"Controls\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationDiscoveryUrlMissing": "Veriler \"DiscoveryUrl\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationInvalid": "Sağlanan veriler geçerli değil. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationInvalidJsonDefinition": "Özel denetim kaydedilemiyor. JSON metnini gözden geçirip yeniden deneyin.",
+ "claimProviderValidationNameAlreadyExists": "\"Name\" değeri zaten var. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationNameMissing": "Veriler \"Name\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProviderValidationUnknown": "Sağlanan veriler doğrulanırken bilinmeyen bir hata oluştu. Lütfen gözden geçirip yeniden deneyin.",
+ "claimProvidersNone": "Özel denetim yok",
+ "claimProvidersSearchPlaceholder": "Arama denetimleri.",
+ "classicPoilcyFilterTitle": "Göster",
+ "classicPolicyAllPlatforms": "Tüm Platformlar",
+ "classicPolicyClientAppBrowserAndNative": "Tarayıcı, mobil uygulamalar ve masaüstü istemcileri",
+ "classicPolicyCloudAppTitle": "Bulut uygulaması",
+ "classicPolicyControlAllow": "İzin Ver",
+ "classicPolicyControlBlock": "Engelle",
+ "classicPolicyControlBlockWhenNotAtWork": "Çalışmıyorken erişimi engelle",
+ "classicPolicyControlRequireCompliantDevice": "Uyumlu cihaz gerektir",
+ "classicPolicyControlRequireDomainJoinedDevice": "Etki alanına katılmış cihaz gerektir",
+ "classicPolicyControlRequireMfa": "Çok faktörlü kimlik doğrulaması gerektir",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Çalışmıyorken çok faktörlü kimlik doğrulaması gerektir",
+ "classicPolicyDeleteCommand": "Sil",
+ "classicPolicyDeleteFailTitle": "Klasik ilke silinemedi",
+ "classicPolicyDeleteInProgressTitle": "Klasik ilke siliniyor",
+ "classicPolicyDeleteSuccessTitle": "Klasik ilke silindi",
+ "classicPolicyDetailBladeTitle": "Ayrıntılar",
+ "classicPolicyDisableCommand": "Devre dışı bırak",
+ "classicPolicyDisableConfirmation": "'{0}' adlı ilkeyi devre dışı bırakmak istediğinizden emin misiniz? Bu eylem geri alınamaz.",
+ "classicPolicyDisableFailDescription": "'{0}' devre dışı bırakılamadı",
+ "classicPolicyDisableFailTitle": "Klasik ilke devre dışı bırakılamadı",
+ "classicPolicyDisableInProgressDescription": "'{0}' devre dışı bırakılıyor",
+ "classicPolicyDisableInProgressTitle": "Klasik ilke devre dışı bırakılıyor",
+ "classicPolicyDisableSuccessDescription": "'{0}' başarıyla devre dışı bırakıldı",
+ "classicPolicyDisableSuccessTitle": "Klasik ilke devre dışı bırakıldı",
+ "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync tarafından desteklenen platformlar",
+ "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync tarafından desteklenmeyen platformlar",
+ "classicPolicyExcludedPlatformsTitle": "Dışlanan cihaz platformları",
+ "classicPolicyFilterAll": "Tüm ilkeler",
+ "classicPolicyFilterDisabled": "Devre dışı ilkeler",
+ "classicPolicyFilterEnabled": "Etkin ilkeler",
+ "classicPolicyIncludeExcludeMembersDescription": "Grupları dışlayarak aşamalı ilke geçişi gerçekleştirebilirsiniz.",
+ "classicPolicyIncludeExcludeMembersTitle": "Grupları içerme/dışlama",
+ "classicPolicyIncludedPlatformsTitle": "Dahil edilen cihaz platformları",
+ "classicPolicyManualMigrationMessage": "Bu ilkenin el ile geçirilmesi gerekiyor.",
+ "classicPolicyMigrateCommand": "Geçir",
+ "classicPolicyMigrateConfirmation": "'{0}' adlı ilkeyi geçirmek istediğinizden emin misiniz? Bu ilke yalnızca bir kez geçirilebilir.",
+ "classicPolicyMigrateFailDescription": "'{0}' geçirilemedi",
+ "classicPolicyMigrateFailTitle": "Klasik ilke geçirilemedi",
+ "classicPolicyMigrateInProgressDescription": "'{0}' geçiriliyor",
+ "classicPolicyMigrateInProgressTitle": "Klasik ilke geçiriliyor",
+ "classicPolicyMigrateRecommendText": "Öneri: Yeni Azure portalı ilkelerine geçin.",
+ "classicPolicyMigrateSuccessTitle": "Klasik ilke başarıyla geçirildi",
+ "classicPolicyMigratedSuccessDescription": "Bu klasik ilke artık İlkeler bölümünden yönetilebilir.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "Bu klasik ilke, {0} yeni ilke olarak geçirildi. Yeni ilkeleri yönetmek için İlkeler bölümünü kullanabilirsiniz.",
+ "classicPolicyNoEditPermissionMsg": "Bu ilkeyi düzenleme izniniz yok. İlkeyi yalnızca genel yöneticiler ve güvenlik yöneticileri düzenleyebilir. Daha fazla bilgi edinmek için buraya tıklayın.",
+ "classicPolicySaveFailDescription": "'{0}' kaydedilemedi",
+ "classicPolicySaveFailTitle": "Klasik ilke kaydedilemedi",
+ "classicPolicySaveInProgressDescription": "'{0}' kaydediliyor",
+ "classicPolicySaveInProgressTitle": "Klasik ilke kaydediliyor",
+ "classicPolicySaveSuccessDescription": "'{0}' başarıyla kaydedildi",
+ "classicPolicySaveSuccessTitle": "Klasik ilke kaydedildi",
+ "clientAppBladeLegacyInfoBanner": "Eski kimlik doğrulaması şu anda desteklenmiyor",
+ "clientAppBladeLegacyUpsellBanner": "Desteklenmeyen istemci uygulamalarını engelle (Önizleme)",
+ "clientAppBladeTitle": "İstemci uygulamaları",
+ "clientAppDescription": "Bu ilkenin uygulanacağı istemci uygulamalarını seçin",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync, şu anda diğer koşulların hiçbirini desteklemiyor",
+ "clientAppLearnMore": "Kullanıcı erişimini, modern kimlik doğrulaması kullanmayan belirli istemci uygulamalarını hedeflemek için denetleyin.",
+ "clientAppLegacyHeader": "Eski kimlik doğrulama istemcileri",
+ "clientAppMobileDesktop": "Mobil uygulamalar ve masaüstü istemcileri",
+ "clientAppModernHeader": "Modern kimlik doğrulama istemcileri",
+ "clientAppOnlySupportedPlatforms": "İlkeyi yalnızca desteklenen platformlara uygula",
+ "clientAppSelectSpecificClientApps": "İstemci uygulamalarını seçin",
+ "clientAppWebBrowser": "Tarayıcı",
+ "clientAppsSelectedLabel": "{0} eklendi",
+ "clientTypeBrowser": "Tarayıcı",
+ "clientTypeEas": "Exchange ActiveSync istemcileri",
+ "clientTypeEasInfo": "Yalnızca eski kimlik doğrulaması kullanan Exchange ActiveSync istemcileri.",
+ "clientTypeModernAuth": "Modern kimlik doğrulama istemcileri",
+ "clientTypeOtherClients": "Diğer istemciler",
+ "clientTypeOtherClientsInfo": "Bu, eski Office istemcilerini ve diğer posta protokollerini (POP, IMAP, SMTP vb.) içerir. [Daha fazla bilgi][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "Bu ilkede yapılandırılan {0} bulut uygulaması dizinden silinmiş, ancak bu durum ilkedeki diğer uygulamaları etkilemiyor. İlkenin uygulama bölümünü sonraki ilk güncelleştirmenizde, silinen uygulamalar ilkeden otomatik olarak kaldırılır.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "Tüm Microsoft uygulamaları",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Microsoft bulut, mobil ve masaüstü uygulamalarına izin ver (Önizleme)",
+ "cloudappsSelectionBladeAllCloudapps": "Tüm bulut uygulamaları",
+ "cloudappsSelectionBladeExcludeDescription": "İlkenin dışında tutulacak bulut uygulamalarını seçin",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Dışlanan bulut uygulamalarını seçin",
+ "cloudappsSelectionBladeIncludeDescription": "Bu ilkenin uygulanacağı bulut uygulamalarını seçin",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Seç",
+ "cloudappsSelectionBladeSelectedCloudapps": "Uygulama seç",
+ "cloudappsSelectorInfoBallonText": "Kullanıcının, işlerini yapmak için eriştiği hizmetler. Örneğin, 'Salesforce'",
+ "cloudappsSelectorPluralExcluded": "{0} uygulama dışlandı",
+ "cloudappsSelectorPluralIncluded": "{0} uygulama eklendi",
+ "cloudappsSelectorSingularExcluded": "1 uygulama dışlandı",
+ "cloudappsSelectorSingularIncluded": "1 uygulama eklendi",
+ "cloudappsSelectorUserPlural": "{0} uygulama",
+ "cloudappsSelectorUserSingular": "1 uygulama",
+ "conditionLabelMulti": "{0} koşul seçildi",
+ "conditionLabelOne": "1 koşul seçildi",
+ "conditionalAccessBladeTitle": "Koşullu Erişim",
+ "conditionsNotSelectedLabel": "Yapılandırılmadı",
+ "conditionsReqMfaReauthSet": "\"Çok faktörlü kimlik doğrulaması gerektir\" izni ve \"her seferinde oturum açma sıklığı\" oturum denetimi seçili olduğu için bazı seçenekler kullanılamıyor",
+ "conditionsReqPwSet": "Şu anda seçilmekte olan \"Parola değişikliği iste\" izni nedeniyle bazı seçenekler kullanılamıyor",
+ "configureCasText": "Cloud App Security'yi Yapılandırın",
+ "configureCustomControlsText": "Özel ilke yapılandır",
+ "controlLabelMulti": "{0} denetim seçildi",
+ "controlLabelOne": "1 denetim seçildi",
+ "controlValidatorText": "Lütfen en az bir denetim seçin",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Uyumlu cihazlar gerektirme hakkında daha fazla bilgi edinin.",
+ "controlsDeviceComplianceInfoBubble": "Cihaz, Intune ile uyumlu olmalıdır. Cihaz uyumlu değilse, kullanıcıdan cihazı uyumlu hale getirmesi istenir.",
+ "controlsDomainJoinedAriaLabel": "Microsoft Entra hibrit ile katılan cihazlar gerektirme hakkında daha fazla bilgi edinin.",
+ "controlsDomainJoinedInfoBubble": "Cihazların Microsoft Entra hibrit’e katılmış olması gerekir.",
+ "controlsMamAriaLabel": "Onaylı istemci uygulamaları gerektirme hakkında daha fazla bilgi edinin.",
+ "controlsMamInfoBubble": "Cihaz bu onaylı istemci uygulamalarını kullanmalıdır.",
+ "controlsMfaInfoBubble": "Kullanıcının, telefon görüşmeleri ve kısa mesaj gibi ek güvenlik gereksinimleri tamamlaması gerekir",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "İlke korumalı uygulamalar gerektirme hakkında daha fazla bilgi edinin.",
+ "controlsRequireCompliantAppInfoBubble": "Cihazın ilke korumalı uygulamaları kullanması gerekir.",
+ "controlsRequirePasswordResetAriaLabel": "Parola değişikliği gerektirme hakkında daha fazla bilgi edinin.",
+ "controlsRequirePasswordResetInfoBubble": "Kullanıcı kaynaklı riski azaltmak için parola değişikliği gerektirin. Bu seçenek, çok faktörlü kimlik doğrulaması da gerektirir. Diğer denetimler kullanılamaz.",
+ "countriesRadiobuttonInfoBalloonContent": "Oturum açma işleminin yapıldığı ülke/bölge, kullanıcının IP adresine göre belirlenir.",
+ "createNewVpnCert": "Yeni sertifika",
+ "createdTimeLabel": "Oluşturma zamanı",
+ "customRoleLabel": "Özel roller (desteklenmiyor)",
+ "dateRangeTypeLabel": "Tarih aralığı",
+ "daysOfWeekPlaceholderText": "Haftanın günlerini filtreleyin",
+ "daysOfWeekTypeLabel": "Haftanın günleri",
+ "deletePolicyNoLicenseText": "Bu ilkeyi artık silebilirsiniz. İlke silindikten sonra, gerekli lisanslara sahip olmadığınız sürece ilkeyi yeniden oluşturamazsınız.",
+ "descriptionContentForControlsAndOr": "Birden fazla denetim için",
+ "devicePlatform": "Cihaz platformu",
+ "devicePlatformConditionHelpDescription": "İlkeyi seçili cihaz platformlarına uygulayın.\n[Daha fazla bilgi][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} eklendi",
+ "devicePlatformIncludeExclude": "{0} ve {1} dışlandı",
+ "devicePlatformNoSelectionError": "Cihaz platformlarını seçmek için bir alt öğenin seçilmesi gerekir.",
+ "devicePlatformsNone": "Yok",
+ "deviceSelectionBladeExcludeDescription": "İlkenin dışında tutulacak platformları seçin",
+ "deviceSelectionBladeIncludeDescription": "Bu ilkeye dahil edilecek cihaz platformlarını seçin",
+ "deviceStateAll": "Tüm cihaz durumları",
+ "deviceStateCompliant": "Cihaz uyumlu olarak işaretli",
+ "deviceStateCompliantInfoContent": "Intune ile uyumlu cihazlar bu ilkenin değerlendirilmesinden dışlanır; örneğin ilke erişimi engellerse, Intune ile uyumlu cihazlar dışındaki tüm cihazları engeller.",
+ "deviceStateConditionConfigureInfoContent": "Cihaz durumuna göre ilkeyi yapılandırma",
+ "deviceStateConditionSelectorInfoContent": "Kullanıcının oturum açmak için kullandığı cihazın 'Microsoft Entra hibrit ile katılan' veya 'uyumlu olarak işaretli' olup olmadığını belirtir.\n Bu kullanımdan kaldırıldı. Bunun yerine '{1}' kullanın.",
+ "deviceStateConditionSelectorLabel": "Cihaz durumu (kullanım dışı)",
+ "deviceStateDomainJoined": "Cihaz, Microsoft Entra hibrite katılmış",
+ "deviceStateDomainJoinedInfoContent": "Microsoft Entra hibrit ile katılan cihazlar bu ilkenin değerlendirilmesinden dışlanır; örneğin ilke erişimi engellerse, Microsoft Entra hibrit’e katılmış cihazlar dışındaki tüm cihazları engeller.",
+ "deviceStateDomainJoinedInfoLinkText": "Daha fazla bilgi edinin.",
+ "deviceStateExcludeDescription": "Cihazları ilkeden dışlamak için kullanılan cihaz durumu koşulunu seçin.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} ve şunu dışla: {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} ve şunları dışla: {1} ve {2}",
+ "directoryRoleInfoContent": "Yerleşik dizin rollerine ilke atayın.",
+ "directoryRolesLabel": "Dizin rolleri",
+ "discardbutton": "At",
+ "downloadDefaultFileName": "IP Aralıkları",
+ "downloadExampleFileName": "Örnek",
+ "downloadExampleHeader": "Bu örnek dosyasında, kabul edilebilir veri türleri gösterilmektedir. # ile başlayan satırlar yoksayılır.",
+ "duplicate": "Çoğalt",
+ "duplicatePolicyName": "{0} KOPYASI",
+ "endDatePickerLabel": "Uçlar",
+ "endTimePickerLabel": "Bitiş saati",
+ "enterCountryText": "IP adresi ve Ülke/Bölge bir çift olarak değerlendirilir. Ülkeyi seçin.",
+ "enterIpText": "IP adresi ve Ülke/Bölge bir çift olarak değerlendirilir. IP adresi girin.",
+ "enterUserText": "Hiçbir kullanıcı seçilmedi. Bir kullanıcı seçin.",
+ "evaluationResult": "Değerlendirme sonucu",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Yalnızca desteklenen platformlarla Exchange ActiveSync",
+ "excludeAllTrustedLocationSelectorText": "tüm güvenilen konumları hariç tut",
+ "featureRequiresP2": "Bu özellik, Microsoft Entra P2 lisansı gerektirir.",
+ "friday": "Cuma",
+ "grantControls": "İzin verme denetimleri",
+ "gridNetworkTrusted": "Güvenilir",
+ "gridPolicyCreatedDateTime": "Oluşturulma Tarihi",
+ "gridPolicyEnabled": "Etkin",
+ "gridPolicyModifiedDateTime": "Değişiklik Tarihi",
+ "gridPolicyName": "İlke Adı",
+ "gridPolicyState": "Durum",
+ "groupSelectionBladeExcludeDescription": "İlkenin dışında tutulacak grupları seçin",
+ "groupSelectionBladeExcludedSelectorTitle": "Dışlanan grupları seçin",
+ "groupSelectionBladeSelect": "Grupları seçin",
+ "groupSelectorInfoBallonText": "Dizinde ilkenin uygulandığı gruplar. Örneğin, 'Pilot grup'",
+ "groupsSelectionBladeTitle": "Gruplar",
+ "helpCommonScenariosText": "Sık karşılaşılan senaryolar ilginizi çekiyor mu?",
+ "helpCondition1": "Herhangi bir kullanıcı şirket ağının dışında olduğunda",
+ "helpCondition2": "‘Yöneticiler’ grubundaki kullanıcılar oturum açtığında",
+ "helpConditionsTitle": "Koşullar",
+ "helpControl1": "Çok faktörlü kimlik doğrulaması ile oturum açmaları gerekir",
+ "helpControl2": "Intune ile uyumlu veya etki alanına katılmış bir cihaz kullanıyor olmaları gerekir",
+ "helpControlsTitle": "Denetimler",
+ "helpIntroText": "Koşullu Erişim size belirli koşullar oluştuğunda erişim gereksinimleri uygulamaya koyma olanağı sunar. Birkaç örneğe bakalım",
+ "helpIntroTitle": "Koşullu Erişim nedir?",
+ "helpLearnMoreText": "Koşullu Erişim hakkında daha fazla bilgi edinmek ister misiniz?",
+ "helpStartStep1": "\"+ Yeni ilke\" seçeneğine tıklayarak ilk ilkenizi oluşturun",
+ "helpStartStep2": "İlke Koşullarını ve Denetimlerini belirtin",
+ "helpStartStep3": "İşiniz bittiğinde ilkeyi Etkinleştirmeyi ve Oluşturmayı unutmayın",
+ "helpStartTitle": "Kullanmaya başlayın",
+ "highRisk": "Yüksek",
+ "includeAndExcludeAppsTextFormat": "Dahil et: {0}. Hariç tut: {1}.",
+ "includeAppsTextFormat": "Dahil et: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Bilinmeyen alanlar, bir ülke/bölge ile eşleştirilemeyen IP adresleridir.",
+ "includeUnknownAreasCheckboxLabel": "Bilinmeyen alanları dahil et",
+ "infoCommandLabel": "Bilgi",
+ "invalidCertDuration": "Sertifika süresi geçersiz",
+ "invalidIpAddress": "Değer, geçerli bir IP adresi olmalıdır",
+ "invalidReAuthSignInRiskOptionSelected": "“Oturum açma sıklığı her zaman” oturum denetimi, “oturum açma riski” koşul denetiminde “risk yok” seçimine izin vermiyor.",
+ "invalidUriErrorMsg": "Lütfen geçerli bir URI girin. Örneğin, 'uri:contoso.com:acr' ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Tümünü yükle",
+ "loading": "Yükleniyor...",
+ "locationConfigureNamedLocationsText": "Güvenilen tüm konumları yapılandır",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Konum adı çok uzun. En fazla 256 karakter uzunluğunda olabilir",
+ "locationSelectionBladeExcludeDescription": "İlkenin dışında tutulacak konumları seçin",
+ "locationSelectionBladeIncludeDescription": "Bu ilkeye dahil edilecek konumları seçin",
+ "locationsAllLocationsLabel": "Herhangi bir konum",
+ "locationsAllNamedLocationsLabel": "Güvenilen tüm IP'ler",
+ "locationsAllPrivateLinksLabel": "Kiracımdaki Tüm Özel Bağlantılar",
+ "locationsIncludeExcludeLabel": "{0} ve tüm güvenilen IP'leri dışla",
+ "locationsSelectedPrivateLinksLabel": "Seçili Özel Bağlantılar",
+ "lowRisk": "Düşük",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "Kurumunuzun Koşullu Erişim ilkelerini yönetebilmesi için Microsoft Entra Kimlik P1 veya P2 gerekiyor.",
+ "manageSecurityDefaultsAriaLabel": "Güvenlik varsayılanları ayarlarını yönetin.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Güvenilen bir konumdan oturum açmak, kullanıcının oturum açma riskini azaltır. Bu konumu yalnızca, girilen IP aralıkları şirketiniz tarafından tanınıyor ve bu IP aralıklarına güveniliyorsa güvenilen olarak işaretleyin.",
+ "markAsTrustedCheckboxLabel": "Güvenilen konum olarak işaretle",
+ "mediumRisk": "Orta",
+ "memberSelectionCommandRemove": "Kaldır",
+ "menuItemClaimProviderControls": "Özel denetimler (Önizleme)",
+ "menuItemClassicPolicies": "Klasik ilkeler",
+ "menuItemInsightsAndReporting": "İçgörüler ve raporlama",
+ "menuItemManage": "Yönet",
+ "menuItemNamedLocationsPreview": "Adlandırılmış konumlar (Önizleme)",
+ "menuItemNamedNetworks": "Adlandırılmış konumlar",
+ "menuItemPolicies": "İlkeler",
+ "menuItemTermsOfUse": "Kullanım koşulları",
+ "modifiedTimeLabel": "Değiştirme saati",
+ "monday": "Pazartesi",
+ "nameLabel": "Ad",
+ "namedLocationCountryInfoBanner": "Ülkelere/bölgelere yalnızca IPv4 adresleri eşlenir. IPv6 adresleri bilinmeyen ülkelerde/bölgelerde yer alır.",
+ "namedLocationTypeCountry": "Ülkeler/Bölgeler",
+ "namedLocationTypeLabel": "Konumu şunu kullanarak tanımla:",
+ "namedLocationUpsellBanner": "Bu görünüm kullanımdan kaldırıldı. Yeni ve iyileştirilmiş ‘Adlandırılmış konumlar’ görünümüne gidin.",
+ "namedLocationsHelpDescription": "Adlandırılmış konumlar, Microsoft Entra Kimlik güvenlik raporları tarafından, hatalı pozitif sonuçları ve Microsoft Entra Koşullu Erişim ilkelerini azaltmak için kullanılır.\n[Daha fazla bilgi][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Yeni bir IP aralığı ekleyin (ör: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "En az bir ülke/bölge seçmeniz gerekiyor",
+ "namedNetworkDeleteCommand": "Sil",
+ "namedNetworkDeleteDescription": "'{0}' adlı ağı silmek istediğinizden emin misiniz? Bu eylem geri alınamaz.",
+ "namedNetworkDeleteTitle": "Emin misiniz?",
+ "namedNetworkDownloadIpRange": "İndir",
+ "namedNetworkInvalidRange": "Değer, geçerli bir IP aralığı olmalıdır.",
+ "namedNetworkIpRangeNeeded": "En az bir geçerli IP aralığı gereklidir",
+ "namedNetworkIpRangesDescriptionContent": "Kuruluşunuzun IP aralıklarını yapılandırın",
+ "namedNetworkIpRangesTab": "IP aralıkları",
+ "namedNetworkListAdd": "Yeni konum",
+ "namedNetworkListConfigureTrustedIps": "Çok faktörlü kimlik doğrulaması güvenilen IP'lerini yapılandırma",
+ "namedNetworkNameDescription": "Örnek: 'Redmond ofisi'",
+ "namedNetworkNameInvalid": "Belirtilen ad geçersiz.",
+ "namedNetworkNameRequired": "Bu konum için bir ad belirtmelisiniz.",
+ "namedNetworkNoIpRanges": "IP aralığı yok",
+ "namedNetworkNotificationCreateDescription": "'{0}' adlı konum oluşturuluyor",
+ "namedNetworkNotificationCreateFailedDescription": "'{0}' adlı konum oluşturulamadı. Lütfen daha sonra yeniden deneyin.",
+ "namedNetworkNotificationCreateFailedTitle": "Konum oluşturulamadı",
+ "namedNetworkNotificationCreateSuccessDescription": "'{0}' adlı konum oluşturuldu",
+ "namedNetworkNotificationCreateSuccessTitle": "'{0}' oluşturuldu",
+ "namedNetworkNotificationCreateTitle": "'{0}' oluşturuluyor",
+ "namedNetworkNotificationDeleteDescription": "'{0}' adlı konum siliniyor",
+ "namedNetworkNotificationDeleteFailedDescription": "'{0}' adlı konum silinemedi. Lütfen daha sonra yeniden deneyin.",
+ "namedNetworkNotificationDeleteFailedTitle": "Konum Silinemedi",
+ "namedNetworkNotificationDeleteSuccessDescription": "'{0}' adlı konum silindi",
+ "namedNetworkNotificationDeleteSuccessTitle": "'{0}' silindi",
+ "namedNetworkNotificationDeleteTitle": "{0} siliniyor",
+ "namedNetworkNotificationUpdateDescription": "'{0}' adlı konum güncelleştiriliyor",
+ "namedNetworkNotificationUpdateFailedDescription": "'{0}' adlı konum güncelleştirilemedi. Lütfen daha sonra yeniden deneyin.",
+ "namedNetworkNotificationUpdateFailedTitle": "Konum Güncelleştirilemedi",
+ "namedNetworkNotificationUpdateSuccessDescription": "'{0}' adlı konum güncelleştirildi",
+ "namedNetworkNotificationUpdateSuccessTitle": "'{0}' güncelleştirildi",
+ "namedNetworkNotificationUpdateTitle": "'{0}' güncelleştiriliyor",
+ "namedNetworkSearchPlaceholder": "Konumlarda arama yapın.",
+ "namedNetworkUploadFailedDescription": "Sağlanan dosya ayrıştırılırken hata oluştu. Karşıya yüklediğiniz dosyanın, her satırı CIDR biçiminde olan bir düz metin dosyası olduğundan emin olun.",
+ "namedNetworkUploadFailedTitle": "'{0}' ayrıştırılamadı",
+ "namedNetworkUploadInProgressDescription": "'{0}' dosyasından geçerli CIDR değerleri ayrıştırılmaya çalışılıyor.",
+ "namedNetworkUploadInProgressTitle": "'{0}' ayrıştırılıyor",
+ "namedNetworkUploadInvalidDescription": "'{0}' dosyası çok büyük ya da biçimi geçersiz.",
+ "namedNetworkUploadInvalidTitle": "'{0}' Geçersiz",
+ "namedNetworkUploadIpRange": "Karşıya yükle",
+ "namedNetworkUploadSuccessDescription": "{0} satır analiz edildi. {1} tanesinin biçimi hatalı. {2} tanesi atlandı.",
+ "namedNetworkUploadSuccessTitle": "'{0}' dosyasını ayrıştırma işlemi tamamlandı",
+ "namedNetworksAdd": "Adlandırılmış yeni konum",
+ "namedNetworksConditionHelpDescription": "Kullanıcı erişimini kullanıcıların fiziksel konumlarına göre denetleyin.\n[Daha fazla bilgi][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} ve {1} dışlandı",
+ "namedNetworksHelpDescription": "Adlandırılmış konumlar, Microsoft Entra Kimliği güvenlik raporları tarafından, hatalı pozitif sonuçları ve Microsoft Entra Koşullu Erişim ilkelerini azaltmak için kullanılır.\n[Daha fazla bilgi][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} eklendi",
+ "namedNetworksNone": "Adlandırılmış konum bulunamadı.",
+ "namedNetworksTitle": "Konumları yapılandırın",
+ "namednetworkExceedingSizeErrorBladeTitle": "Hata ayrıntıları",
+ "namednetworkExceedingSizeErrorDetailText": "Daha fazla ayrıntı için buraya tıklayın.",
+ "namednetworkExceedingSizeErrorMessage": "Adlandırılmış konumlar için izin verilen en fazla depolama boyutu aşıldı. Daha kısa bir listeyle tekrar deneyin. Daha fazla ayrıntı görüntülemek için buraya tıklayın.",
+ "needMfaSecondary": "\"Her seferinde oturum açma sıklığı\" \"Yalnızca ikincil kimlik doğrulama yöntemleri\" ile seçildiğinde \"Çok faktörlü kimlik doğrulaması gerektir\" seçeneği seçilmelidir",
+ "needMfaSpecificApps": "\"Her seferinde oturum açma sıklığı\" oturum denetimi, özellikle desteklenen uygulamalar seçildiğinde \"çok faktörlü kimlik doğrulaması gerektir\" izin denetimini gerektirir",
+ "newCertName": "yeni sertifika",
+ "noAttributePermissionsError": "İlke oluşturmak veya güncelleştirmek için ayrıcalıklar yetersiz. Dinamik filtre eklemek/düzenlemek için öznitelik tanımı okuyucu rolü gereklidir.",
+ "noPolicyRowMessage": "İlke yok",
+ "noSPSelected": "Hiç bir hizmet sorumlusu seçilmedi",
+ "noUpdatePermissionMessage": "Bu ayarları güncelleştirme izniniz yok. Erişim elde etmek için genel yöneticinize başvurun.",
+ "noUserSelected": "Kullanıcı seçilmedi",
+ "noneRisk": "Risk yok",
+ "office365Description": "Bu uygulamalar Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer ve diğerleridir.",
+ "office365InfoBox": "Seçilen uygulamalardan en az biri Office 365'in parçası. Bunun yerine Office 365'te ilke ayarlamanızı öneririz.",
+ "oneUserSelected": "1 kullanıcı seçildi",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Bu ilkeyi yalnızca genel yöneticiler kaydedebilir.",
+ "or": "{0} VEYA {1} ",
+ "pickerDoneCommand": "Bitti",
+ "policiesBladeAdPremiumUpsellBannerText": "Microsoft Entra Kimlik Premium ile Bulut uygulamaları, Oturum açma riski ve Cihaz platformları gibi konularla ilgili kendi ilkelerinizi ve hedefe yönelik koşullar oluşturun",
+ "policiesBladeTitle": "İlkeler",
+ "policiesBladeTitleWithAppName": "İlkeler: {0}",
+ "policiesDisabledBannerText": "Bağlı oturum açma özniteliğine sahip uygulamalarda ilke oluşturma ve düzenleme özelliği yasaklanmış.",
+ "policiesHitMaxLimitStatusBarMessage": "Bu kiracı için en fazla ilke sayısına ulaştınız. Daha fazla oluşturmadan önce bazı ilkeleri silin.",
+ "policyAssignmentsSection": "Atamalar",
+ "policyBlockAllInfoBox": "Yapılandırılan ilke tüm kullanıcıları engelleyeceğinden desteklenmiyor. Atamaları ve denetimleri gözden geçirin. Bu ilkeyi kaydetmek istiyorsanız geçerli {0} kullanıcısını hariç tutun.",
+ "policyCloudAppsDisplayTextAllApp": "Tüm uygulamalar",
+ "policyCloudAppsLabel": "Bulut uygulamaları",
+ "policyConditionClientAppDescription": "Kullanıcının bulut uygulamasına erişmek için kullandığı yazılım. Örneğin, 'Tarayıcı'",
+ "policyConditionClientAppV2Description": "Kullanıcının bulut uygulamasına erişmek için kullandığı yazılım. Örneğin, 'Tarayıcı'",
+ "policyConditionDevicePlatform": "Cihaz platformları",
+ "policyConditionDevicePlatformDescription": "Kullanıcının oturum açtığı platform. Örneğin, 'iOS'",
+ "policyConditionLocation": "Konumlar",
+ "policyConditionLocationDescription": "Kullanıcının oturum açtığı konum (IP adresi aralığı kullanılarak belirlenir)",
+ "policyConditionLocationPreview": "Konumlar (Önizleme)",
+ "policyConditionSigninRisk": "Oturum açma riski",
+ "policyConditionSigninRiskDescription": "Oturum açma eyleminin, hesabın kullanıcısı dışındaki biri tarafından gerçekleştirilme olasılığı. Risk düzeyi yüksek, orta veya düşük olabilir. Microsoft Entra Kimlik P2 lisansı gerektirir.",
+ "policyConditionUserRisk": "Kullanıcı riski",
+ "policyConditionUserRiskDescription": "İlkenin zorlanması için gereken kullanıcı risk düzeylerini yapılandırın",
+ "policyConditioniClientApp": "İstemci uygulamaları",
+ "policyControlAllowAccessDisplayedName": "Erişim izni ver",
+ "policyControlAuthenticationStrengthDisplayedName": "Kimlik doğrulaması gücü gerektir (Önizleme)",
+ "policyControlBladeTitle": "Erişim İzni Verme",
+ "policyControlBlockAccessDisplayedName": "Erişimi engelle",
+ "policyControlCompliantDeviceDisplayedName": "Cihazın uyumlu olarak işaretlenmesini gerektir",
+ "policyControlContentDescription": "Erişimi engellemek veya erişim izni vermek için erişim zorlamasını denetleyin.",
+ "policyControlInfoBallonText": "Erişimi engelleyin veya erişim izni vermek için karşılanması gereken ek gereksinimleri seçin",
+ "policyControlMfaChallengeDisplayedName": "Çok faktörlü kimlik doğrulaması gerektir",
+ "policyControlRequireCompliantAppDisplayedName": "Uygulama koruma ilkesi iste",
+ "policyControlRequireDomainJoinedDisplayedName": "Microsoft Entra hibrite katılmış cihaz gerektir",
+ "policyControlRequireMamDisplayedName": "Onaylı istemci uygulaması gerektir",
+ "policyControlRequiredPasswordChangeDisplayedName": "Parola değişikliği iste",
+ "policyControlSelectAuthStrength": "Kimlik doğrulaması gücü gerektir",
+ "policyControlsNoControlsSelected": "0 denetim seçili",
+ "policyControlsSection": "Erişim denetimleri",
+ "policyCreatBladeTitle": "Yeni",
+ "policyCreateButton": "Oluştur",
+ "policyCreateFailedMessage": "Hata: {0}",
+ "policyCreateFailedTitle": "'{0}' oluşturulamadı",
+ "policyCreateInProgressTitle": "'{0}' oluşturuluyor",
+ "policyCreateSuccessMessage": "'{0}' başarıyla oluşturuldu. \"İlkeyi etkinleştir\" seçeneğini \"Açık\" olarak ayarladıysanız ilke birkaç dakika içinde etkinleştirilecektir.",
+ "policyCreateSuccessTitle": "'{0}' başarıyla oluşturuldu",
+ "policyDeleteConfirmation": "'{0}' adlı ağı silmek istediğinizden emin misiniz? Bu eylem geri alınamaz.",
+ "policyDeleteFailTitle": "'{0}' silinemedi",
+ "policyDeleteInProgressTitle": "{0} siliniyor",
+ "policyDeleteSuccessTitle": "'{0}' başarıyla silindi.",
+ "policyEnforceLabel": "İlkeyi etkinleştir",
+ "policyErrorCannotSetSigninRisk": "Oturum açma riski koşuluna sahip bir ilkeyi kaydetme izniniz yok.",
+ "policyErrorNoPermission": "İlkeyi kaydetmek için izniniz yok. Genel yöneticinizle iletişime geçin.",
+ "policyErrorUnknown": "Bir sorun oluştu, lütfen daha sonra yeniden deneyin.",
+ "policyFallbackWarningMessage": "MS Graph kullanarak '{0}' ilkesini oluşturma veya güncelleştirme işlemi başarısız oluyor ve AD Graph’e geri dönme sonucu veriyor. Büyük olasılıkla MS Graph için uyumsuz bir koşulla ilke uç noktası çağrılırken hata oluştuğundan, lütfen aşağıdaki senaryoyu araştırın.",
+ "policyFallbackWarningTitle": "'{0}' ilkesini oluşturma veya güncelleştirme işlemi kısmen başarılı oldu",
+ "policyNameCannotBeEmpty": "İlke adı boş olamaz",
+ "policyNameDevice": "Cihaz ilkesi",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Mobil Uygulama Yönetimi ilkesi",
+ "policyNameMfaLocation": "Çok faktörlü kimlik doğrulaması ve konum ilkesi",
+ "policyNamePlaceholderText": "Örnek: 'Cihaz uyumluluğu uygulama ilkesi'",
+ "policyNameTooLongError": "İlke adı çok uzun. En fazla 256 karakter uzunluğunda olabilir",
+ "policyOff": "Kapalı",
+ "policyOn": "Açık",
+ "policyReportOnly": "Yalnızca rapor",
+ "policyReviewSection": "Gözden Geçir",
+ "policySaveButton": "Kaydet",
+ "policyStatusIconDescription": "İlke Etkin",
+ "policyStatusIconEnabled": "Etkinleştirildi durum simgesi",
+ "policyTemplateName1": "{0} tarayıcı erişiminde uygulama tarafından zorlanan kısıtlamalar kullan",
+ "policyTemplateName2": "{0} erişimine yalnızca yönetilen cihazlarda izin ver",
+ "policyTemplateName3": "Sürekli Erişim Değerlendirmesi ayarlarından geçirilen ilke",
+ "policyTriggerRiskSpecific": "Özel risk düzeyi seçin",
+ "policyTriggersInfoBalloonText": "İlkenin geçerli olacağı zamanı tanımlayan koşullar. Örneğin, 'konum'",
+ "policyTriggersNoConditionsSelected": "0 koşul seçili",
+ "policyTriggersSelectorLabel": "Koşullar",
+ "policyUpdateFailedMessage": "Hata: {0}",
+ "policyUpdateFailedTitle": "{0} güncelleştirilemedi",
+ "policyUpdateInProgressTitle": "{0} güncelleştiriliyor",
+ "policyUpdateSuccessMessage": "{0} başarıyla güncelleştirildi. \"İlkeyi etkinleştir\" seçeneğini \"Açık\" olarak ayarladıysanız ilke birkaç dakika içinde etkinleştirilecektir.",
+ "policyUpdateSuccessTitle": "{0} başarıyla güncelleştirildi",
+ "primaryCol": "Birincil",
+ "privateLinkLabel": "Microsoft Entra Kimliği Özel Bağlantı",
+ "reportOnlyInfoBox": "Yalnızca rapor modu: İlkeler oturum açma sırasında değerlendirilir ve kaydedilir ancak kullanıcıları etkilemez.",
+ "requireAllControlsText": "Seçilen tüm denetimleri gerekli kıl",
+ "requireCompliantDevice": "Uyumlu cihaz gerektir",
+ "requireDomainJoined": "Etki alanına katılmış cihaz gerektir",
+ "requireGrantReauth": "\"Her seferinde oturum açma sıklığı\" oturum denetimi, \"Tüm bulut uygulamaları\" seçildiğinde \"çok faktörlü kimlik doğrulaması gerektir\" veya \"parola değişikliği gerektir\" denetim izni gerektirir",
+ "requireMFA": "Çok faktörlü kimlik doğrulaması gerektir",
+ "requireMfaReauth": "\"Her seferinde oturum açma sıklığı\" oturum denetimi, \"oturum açma riski\" için \"çok faktörlü kimlik doğrulaması gerektir\" izin denetimini gerektirir",
+ "requireOneControlText": "Seçilen denetimlerden birini gerekli kıl",
+ "requirePasswordChangeReauth": "\"Her seferinde oturum açma sıklığı\" oturum denetimi \"kullanıcı riski\" için \"parola değişikliği gerektir\" izin denetimini gerektirir",
+ "requireRiskReauth": "\"Tüm bulut uygulamaları\" seçildiğinde \"her seferinde oturum açma sıklığı\" oturum denetimi \"kullanıcı riski\" veya \"oturum açma riski\" oturum denetimini gerektirir.",
+ "requireRiskReauthRiskNotEnabled": "\"Tüm bulut uygulamaları\" seçildiğinde \"her seferinde oturum açma sıklığı\" oturum denetimi kullanılamaz.",
+ "requireRiskReauthSignInOnly": "\"Tüm bulut uygulamaları\" seçildiğinde \"her seferinde oturum açma sıklığı\" oturum denetimi, \"oturum açma riski\" oturum denetimini gerektirir.",
+ "requireRiskReauthUserOnly": "\"Tüm bulut uygulamaları\" seçildiğinde \"her seferinde oturum açma sıklığı\" oturum denetimi, \"kullanıcı riski\" oturum denetimini gerektirir.",
+ "resetFilters": "Filtreleri sıfırla",
+ "sPRequired": "Hizmet sorumlusu gerekiyor",
+ "sPSelectorInfoBalloon": "Sınamak istediğiniz Kullanıcı veya Hizmet Sorumlusu",
+ "saturday": "Cumartesi",
+ "searchTextTooLongError": "Arama metni çok uzun. En fazla 256 karakter",
+ "securityDefaultsPolicyName": "Güvenlik varsayılanları",
+ "securityDefaultsTextMessage": "Koşullu Erişim ilkesini etkinleştirmek için güvenlik varsayılanları devre dışı bırakılmalıdır.",
+ "securityDefaultsUpdateInProgressText": "Bir güvenlik varsayılanları güncelleştirmesi devam ediyor, lütfen biraz bekleyin ve yeniden deneyin.",
+ "securityDefaultsWarningMessage": "Kuruluşunuzun güvenlik yapılandırmalarını yönetmek üzeresiniz gibi görünüyor. Mükemmel! Bir Koşullu Erişim ilkesini etkinleştirmeden önce {0}güvenlik varsayılanlarını devre dışı bırakmanız{1} gerekir.",
+ "selectDevicePlatforms": "Cihaz platformlarını seçin",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Konumları seç",
+ "selectedSP": "Seçili Hizmet sorumlusu",
+ "servicePrincipalBladeExcludedSelectorTitle": "Dışlanan hizmet sorumlularını seçin",
+ "servicePrincipalBladeIncludedSelectorTitle": "Hizmet sorumlularını seçin",
+ "servicePrincipalDataGridAria": "Kullanılabilir hizmet sorumlularının listesi",
+ "servicePrincipalDropDownLabel": "Bu ilke nereye uygulanacak?",
+ "servicePrincipalInfoBox": "İlke atamasındaki '{0}' seçimi nedeniyle bazı koşullar kullanılamıyor",
+ "servicePrincipalRadioAll": "Sahip olunan tüm hizmet sorumluları",
+ "servicePrincipalRadioSelect": "Hizmet sorumlularını seçin",
+ "servicePrincipalSelectionsAria": "Seçili hizmet sorumluları kılavuzu",
+ "servicePrincipalSelectorAria": "Seçilen hizmet sorumlularının listesi",
+ "servicePrincipalSelectorMultiple": "{0} hizmet sorumlusu seçildi",
+ "servicePrincipalSelectorSingle": "1 hizmet sorumlusu seçildi",
+ "servicePrincipalSpecificExc": "Dışlanan belirli hizmet sorumluları",
+ "servicePrincipalSpecificInc": "Eklenen belirli hizmet sorumluları",
+ "servicePrincipals": "Hizmet sorumluları",
+ "sessionControlBladeTitle": "Oturum",
+ "sessionControlDescriptionContent": "Belirli bulut uygulamalarında sınırlı deneyimler sağlamak için erişimi oturum denetimlerini temel alarak denetleyin.",
+ "sessionControlDisableInfo": "Bu denetim yalnızca desteklenen uygulamalarda kullanılabilir. Şu anda uygulama tarafından zorlanan kısıtlamaları destekleyen bulut uygulamaları yalnızca Office 365, Exchange Online ve SharePoint Online'dır. Daha fazla bilgi edinmek için buraya tıklayın.",
+ "sessionControlInfoBallonText": "Oturum denetimleri, bulut uygulaması içinde sınırlı deneyim sağlar.",
+ "sessionControls": "Oturum denetimleri",
+ "sessionControlsAppEnforcedLabel": "Uygulama tarafından zorlanan kısıtlamaları kullan",
+ "sessionControlsCasLabel": "Koşullu Erişim Uygulama Denetimi kullanın",
+ "sessionControlsSecureSignInLabel": "Belirteç bağlaması gerektir",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} eklendi",
+ "signinRiskReauth": "\"Çok faktörlü kimlik doğrulaması gerektir\" izni ve \"her seferinde oturum açma sıklığı\" oturum denetimi seçildiğinde \"Oturum açma riski\" koşulu seçilmelidir.",
+ "signinRiskTriggerDescriptionContent": "Oturum açma risk düzeyini seçin",
+ "singleTenantServicePrincipalInfoBallonText": "İlke yalnızca kuruluşunuza ait tek kiracılı hizmet sorumluları için geçerlidir. Daha fazla bilgi edinmek için buraya tıklayın ",
+ "specificSigninRiskLevelsOption": "Belirli oturum açma risk düzeyleri seçin",
+ "specificUsersExcluded": "belirli kullanıcılar hariç",
+ "specificUsersIncluded": "Belirli kullanıcılar dahil",
+ "specificUsersIncludedAndExcluded": "Dışarıda bırakılan ve dahil edilen belirli kullanıcılar",
+ "startDatePickerLabel": "Başlangıç",
+ "startFreeTrial": "Ücretsiz bir deneme başlatın",
+ "startTimePickerLabel": "Başlangıç zamanı",
+ "sunday": "Pazar",
+ "testButton": "What If",
+ "thumbprintCol": "Parmak İzi",
+ "thursday": "Perşembe",
+ "timeConditionAllTimesLabel": "Her zaman",
+ "timeConditionIntroText": "Bu ilkenin uygulanacağı zamanı yapılandırın",
+ "timeConditionSelectorInfoBallonContent": "Kullanıcı oturum açarken. Örneğin, \"Çarşamba 09:00-17:00 PST\"",
+ "timeConditionSelectorLabel": "Zaman (Önizleme)",
+ "timeConditionSpecificLabel": "Belirli saatler",
+ "timeSelectorAllTimesText": "Her zaman",
+ "timeSelectorSpecificTimesText": "Yapılandırılan belirli saatlerde",
+ "timeZoneDropdownInfoBalloonContent": "Zaman aralığını tanımlayan bir saat dilimi seçin. Bu ilke, tüm saat dilimlerindeki kullanıcılar için geçerlidir. Örneğin, bir kullanıcı için 'Çarşamba 09:00 - 17:00' zaman aralığı, farklı bir saat dilimindeki bir kullanıcı için 'Çarşamba 10:00 - 18:00' olur.",
+ "timeZoneDropdownLabel": "Saat dilimi",
+ "timeZoneDropdownPlaceholderText": "Saat dilimi seçin",
+ "tooManyPoliciesDescription": "Şu anda yalnızca ilk 50 ilke görüntüleniyor, tüm ilkeleri görüntülemek için buraya tıklayın",
+ "tooManyPoliciesTitle": "50'den fazla ilke bulundu",
+ "trustedLocationStatusIconDescription": "Konuma güveniliyor",
+ "trustedLocationStatusIconEnabled": "Güvenilen durum simgesi",
+ "tuesday": "Salı",
+ "uploadInBadState": "Belirtilen dosya karşıya yüklenemiyor.",
+ "upsellAppsDescription": "Hassas uygulamalar için her zaman veya yalnızca şirket ağının dışından erişim sağlandığı durumlarda çok faktörlü kimlik doğrulaması gerektirin.",
+ "upsellAppsTitle": "Uygulamaları güvenli hale getirin",
+ "upsellBannerText": "Bu özelliği kullanmak için ücretsiz bir Premium deneme sürümü edinin",
+ "upsellDataDescription": "Şirket kaynaklarına erişim izni vermek için, cihazın uyumlu olarak işaretlenmesini veya Microsoft Entra hibrite katılmayı zorunlu kılın.",
+ "upsellDataTitle": "Verileri güvenli hale getirin",
+ "upsellDescription": "Koşullu Erişim sayesinde, kullanıcılarınıza tüm cihazlardan en iyi şekilde çalışma olanağı sağlarken aynı zamanda kurumsal verilerinizi güvende tutmanız için gereken denetim ve korumaya sahip olursunuz. Örneğin, şirket ağı dışından gerçekleştirilen ya da uyumluluk ilkelerini karşılayan cihazlara yönelik erişimi engelleyebilirsiniz.",
+ "upsellRiskDescription": "Microsoft’un makine öğrenmesi sistemi tarafından algılanan risk olayları için çok faktörlü kimlik doğrulaması gerektirin.",
+ "upsellRiskTitle": "Riske karşı koruma sağlayın",
+ "upsellTitle": "Koşullu Erişim",
+ "upsellWhyTitle": "Koşullu Erişim neden kullanılmalıdır?",
+ "userAppNoneOption": "Yok",
+ "userNamePlaceholderText": "Kullanıcı Adını Girin",
+ "userNotSetSeletorLabel": "0 kullanıcı ve grup seçili",
+ "userOnlySelectionBladeExcludeDescription": "İlkenin dışında tutulacak kullanıcıları seçin",
+ "userOrGroupSelectionCountDiffBannerText": "Bu ilkede yapılandırılan {0} dizinden silinmiş ancak bu durum, ilkedeki diğer kullanıcıları ve grupları etkilemiyor. Bir sonraki ilke güncelleştirmenizde, silinen kullanıcılar ve/veya gruplar otomatik olarak kaldırılır.",
+ "userOrSPNotSetSelectorLabel": "0 kullanıcı veya iş yükü kimliği seçildi",
+ "userOrSPSelectionBladeTitle": "Kullanıcılar veya iş yükü kimlikleri",
+ "userOrSPSelectorInfoBallonText": "Kullanıcılar, gruplar ve hizmet sorumluları dahil olmak üzere, ilkenin uygulandığı dizindeki kimlikler",
+ "userRequired": "Kullanıcı Gerekli",
+ "userRiskErrorBox": "\"Parola değişikliği iste\" izni seçildiğinde \"Kullanıcı riski\" koşulu seçilmelidir",
+ "userRiskReauth": "\"Parola değişikliği gerektir\" izni ve \"Her seferinde oturum açma sıklığı\" oturum denetimi seçildiğinde \"Oturum açma riski\" yerine \"Kullanıcı riski\" koşulu seçilmelidir",
+ "userSPRequired": "Kullanıcı veya Hizmet sorumlusu gerekiyor",
+ "userSPSelectorTitle": "Kullanıcı veya İş yükü kimliği",
+ "userSelectionBladeAllUsersAndGroups": "Tüm kullanıcılar ve gruplar",
+ "userSelectionBladeExcludeDescription": "İlkenin dışında tutulacak kullanıcıları ve grupları seçin",
+ "userSelectionBladeExcludeTabTitle": "Dışla",
+ "userSelectionBladeExcludedSelectorTitle": "Dışta tutulan kullanıcı ve grupları seçin",
+ "userSelectionBladeIncludeDescription": "Bu ilkenin uygulanacağı kullanıcıları seçin",
+ "userSelectionBladeIncludeTabTitle": "Ekle",
+ "userSelectionBladeIncludedSelectorTitle": "Seç",
+ "userSelectionBladeSelectUsers": "Kullanıcıları seçin",
+ "userSelectionBladeSelectedUsers": "Kullanıcı ve grupları seçin",
+ "userSelectionBladeTitle": "Kullanıcılar ve gruplar",
+ "userSelectorBladeTitle": "Kullanıcılar",
+ "userSelectorExcluded": "{0} dışarıda bırakıldı",
+ "userSelectorGroupPlural": "{0} grup",
+ "userSelectorGroupSingular": "1 grup",
+ "userSelectorIncluded": "{0} eklendi",
+ "userSelectorInfoBallonText": "İlkenin uygulandığı dizindeki kullanıcılar ve gruplar. Örneğin, 'Pilot grup'",
+ "userSelectorSelected": "{0} seçildi",
+ "userSelectorTitle": "Kullanıcı",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} kullanıcı",
+ "userSelectorUserSingular": "1 kullanıcı",
+ "userSelectorWithExclusion": "{0} ve {1}",
+ "usersGroupsLabel": "Kullanıcılar ve gruplar",
+ "viewApprovedAppsText": "Onaylı istemci uygulamalarının listesini görün",
+ "viewCompliantAppsText": "İlke korumalı istemci uygulamalarının listesini görün",
+ "viewPolicyInformation": "İlke bilgilerini görüntüle",
+ "vpnBladeTitle": "VPN bağlantısı",
+ "vpnCertCreateFailedMessage": "Hata: {0}",
+ "vpnCertCreateFailedTitle": "{0} oluşturulamadı",
+ "vpnCertCreateInProgressTitle": "{0} oluşturuluyor",
+ "vpnCertCreateSuccessMessage": "{0} başarıyla oluşturuldu.",
+ "vpnCertCreateSuccessTitle": "{0} başarıyla oluşturuldu",
+ "vpnCertNoRowsMessage": "VPN sertifikası bulunamadı",
+ "vpnCertUpdateFailedMessage": "Hata: {0}",
+ "vpnCertUpdateFailedTitle": "{0} güncelleştirilemedi",
+ "vpnCertUpdateInProgressTitle": "{0} güncelleştiriliyor",
+ "vpnCertUpdateSuccessMessage": "{0} başarıyla güncelleştirildi.",
+ "vpnCertUpdateSuccessTitle": "{0} başarıyla güncelleştirildi",
+ "vpnFeatureInfo": "VPN bağlantısı ve Koşullu Erişim hakkında daha fazla bilgi için buraya tıklayın.",
+ "vpnFeatureWarning": "Portalda bir VPN sertifikası oluşturulduğunda Microsoft Entra Kimlik, VPN istemcisine kısa süreli sertifikalar vermek için bunu hemen kullanmaya başlar. VPN istemcisinin kimlik doğrulamasıyla ilgili sorunları önlemek için VPN sertifikasının VPN sunucusuna hızla dağıtılması önemlidir.",
+ "vpnMenuText": "VPN bağlantısı",
+ "vpncertDropdownDefaultOption": "Süre",
+ "vpncertDropdownInfoBalloonContent": "Oluşturmak istediğiniz sertifikanın süresini seçin",
+ "vpncertDropdownLabel": "Süre seçin",
+ "vpncertDropdownOneyearOption": "1 yıl",
+ "vpncertDropdownThreeyearOption": "3 yıl",
+ "vpncertDropdownTwoyearOption": "2 yıl",
+ "wednesday": "Çarşamba",
+ "whatIfCountry": "Ülke/Bölge",
+ "whatIfCountryInfo": "Kullanıcının oturum açtığı ülke/bölge.",
+ "whatIfDevicePlatformInfo": "Kullanıcının oturum açmak için kullandığı cihaz platformu.",
+ "whatIfEnterIpAddress": "IP adresi girin (ör: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "Geçersiz IP adresi belirtildi.",
+ "whatIfIpAddress": "IP adresi",
+ "whatIfIpAddressInfo": "Kullanıcının oturum açtığı konumun IP adresi.",
+ "whatIfIpCountryInfoBoxText": "IP adresi veya Ülke/Bölge kullanıyorsanız, her iki alan gereklidir ve birlikte doğru eşlenmelidir.",
+ "whatIfSelectCountry": "Ülke/bölge seçin...",
+ "whatIfSelectDevicePlatform": "Cihaz platformunu seçin...",
+ "whatIfSelectPrivateLink": "Özel bağlantı seçin...",
+ "whatIfSelectSignInRisk": "Oturum açma riskini seçin...",
+ "whatIfSignInRisk": "Oturum açma riski",
+ "whatIfSignInRiskInfo": "Oturum açma ile ilişkili risk düzeyi",
+ "whatIfUnknownAreas": "Bilinmeyen Alanlar",
+ "windows365InfoBox": "Windows 365’in seçilmesi Bulut PC’lere ve Azure Sanal Masaüstü oturumu ana bilgisayarlarına bağlantıları etkiler. Daha fazla bilgi edinmek için buraya tıklayın.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "İş yükü kimlikleri (önizleme)",
+ "workloadIdentitiesLicenseText": "Bu ilkeyi düzenlemek için iş yükü kimlikleri premium P1 veya P2 lisansı gereklidir.",
+ "workloadIdentity": "İş yükü kimliği"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Genel Bakış"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Cihaz, Kullanıcı veya Kalite Güncelleştirme Sürümüne göre ara."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "iOS yazılım güncelleştirme profilleri yüklenemedi"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS güncelleştirme profili",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profil"
+ },
+ "listLoadError": "iOS yazılım güncelleştirme profilleri yüklenemiyor. Daha sonra yeniden deneyin",
+ "lowercase": "iOS güncelleştirme ilkesi",
+ "uppercase": "iOS Güncelleştirme ilkesi"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "Ne yazık ki mevcut sürümlerin listesini almak için Apple ile bağlantı kurulamıyor. Lütfen daha sonra yeniden deneyin veya en son sürümle devam edin.",
+ "latestUpdate": "En son güncelleştirme",
+ "noLongerSupported": "Seçili sürüm artık desteklenmiyor",
+ "olderVersionSelected": "Önceki bir sürümü seçtiğinizden, cihazların en son sürüme güncelleştirilmemeleri için yazılım güncelleştirmelerinin görünürlüğünü erteleyen bir cihaz kısıtlama ilkesi uyguladığınızdan emin olun.",
+ "prefix": "iOS/iPadOS yükleyin",
+ "selectSupported": "Apple tarafından desteklenen güncelleştirme sürümünü seçin",
+ "updateToInstall": "Yüklenecek güncelleştirme"
+ },
+ "Schedule": {
+ "always": "Sonraki kontrol iletişiminde güncelleştir",
+ "duringTimeWindows": "Zamanlanmış saatler içinde güncelleştir",
+ "header": "Bir cihaza güncelleştirme ilkesi atandığında varsayılan olarak Intune, en son güncelleştirmeleri cihaz kontrol iletişimi sırasında dağıtır. Bunun yerine özelleştirilmiş başlangıç ve bitiş saatlerini içeren haftalık bir zamanlama oluşturabilirsiniz. Planlanan zamanın dışında güncelleştirmeyi seçerseniz, Intune planlanan zaman sona erene kadar güncelleştirmeleri dağıtmaz.",
+ "infoBalloon": "Güncelleştirmelerin gerçekleştirileceği zaman. Günecelleştirmeleri zamanlanmış saatlerde veya bu saatlerin dışında zamanlamak için ek giriş gerekir.",
+ "label": "Zamanlama çizelgesi türü",
+ "outsideActiveHours": "Etkin saatlerin dışında güncelleştir (eski)",
+ "outsideTimeWindows": "Zamanlanmış saatlerin dışında güncelleştir",
+ "timeWindow": "Zaman penceresi",
+ "timeZone": "Saat dilimi",
+ "title": "Güncelleştirme ilkesi zamanlama ayarları:",
+ "weekly": "Haftalık zamanlama",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "Güncelleştirme sırasında cihazlara yüklenecek iOS/iPadOS sürümü.",
+ "label": "Yüklenecek sürümü seçin"
+ },
+ "header": "Atanan cihazların son iOS/iPadOS güncelleştirmelerini otomatik olarak yüklemesini zorlamak için bir profil oluşturun. Bu ayarlar, yazılım güncelleştirmelerinin nasıl ve ne zaman dağıtılacağını belirler. Bu profil, kullanıcıların işletim sistemini kendilerinin güncelleştirmesini engellemez. Bu, Cihaz Yapılandırması kısıtlama ilkesi ile 90 güne kadar engellenebilir. Güncelleştirmeler yalnızca denetlenen cihazlar için geçerli olacaktır.",
+ "notAvailable": "Yok"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "Görüntülenecek iOS güncelleştirme ilkeleri yok",
+ "macOsUpdates": "Görüntülenecek macOS yazılım güncelleştirme ilkesi yok",
+ "windowsUpdates": "Windows 10 ve sonraki sürümler için gösterilecek bir güncelleştirme kademesi yok."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Cihaz adı",
+ "deviceUpdateStatus": "Cihaz güncelleştirme durumu",
+ "lastUpdated": "Son güncelleştirme",
+ "osVersion": "İşletim sistemi sürümü",
+ "userPrincipalName": "Kullanıcı adı"
+ },
+ "maximumOSVersionFilter": "En yüksek işletim sistemi sürümü",
+ "minimumOSVersionFilter": "En düşük işletim sistemi sürümü",
+ "noData": "Görüntülenecek veri yok",
+ "searchBoxPlaceholder": "Cihaz adı, kullanıcı adı veya işletim sistemi sürümüne göre ara",
+ "title": "macOS cihazları için hesap özeti"
+ },
+ "Category": {
+ "configurationDataFile": "Yapılandırma veri dosyası",
+ "critical": "Kritik",
+ "firmware": "Bellenim",
+ "other": "Diğer"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Son Güncelleştirme",
+ "successfulUpdateCount": "Başarılı güncelleştirmeler dağıtıldı",
+ "totalUpdateCount": "Dağıtılan toplam güncelleştirme sayısı",
+ "updateCategory": "Kategoriyi güncelleştir",
+ "updateCategoryStatus": "Kategori durumunu güncelleştir"
+ },
+ "noData": "Görüntülenecek veri yok"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "macOS yazılım güncelleştirme profilleri yüklenemedi"
+ }
+ },
+ "State": {
+ "available": "Kullanılabilir",
+ "commandFailed": "Komut başarısız oldu",
+ "downloadFailed": "İndirilemedi",
+ "downloadInsufficientNetwork": "İndirme için yetersiz ağ",
+ "downloadInsufficientPower": "İndirme için yetersiz güç",
+ "downloadInsufficientSpace": "İndirme için yetersiz alan",
+ "downloaded": "İndirildi",
+ "downloading": "İndiriliyor",
+ "idle": "Boşta",
+ "installFailed": "Yükleme başarısız",
+ "installInsufficientPower": "Yükleme için yetersiz güç",
+ "installInsufficientSpace": "Yükleme için yetersiz alan",
+ "installing": "Yükleniyor",
+ "scheduled": "Zamanlanmış",
+ "success": "Başarılı",
+ "unknown": "Bilinmeyen"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Son Güncelleştirme",
+ "updateName": "Güncelleştirme adı",
+ "updateStatus": "Durumu güncelleştir",
+ "version": "Sürüm"
+ },
+ "noData": "Görüntülenecek veri yok",
+ "searchBoxPlaceholder": "Güncelleştirme adına veya sürüme göre ara"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS güncelleştirme profili",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profil"
+ },
+ "error": "Hata",
+ "errorOrErrors": "Hatalar",
+ "errors": "Hatalar",
+ "listLoadError": "macOS yazılım güncelleştirme profilleri yüklenemiyor. Daha sonra yeniden deneyin",
+ "lowercase": "macOS güncelleştirme ilkesi",
+ "other": "Diğer",
+ "subtitle": "MacOS yazılım güncelleştirmesi",
+ "upToDate": "Güncel",
+ "uppercase": "macOS Güncelleştirme İlkesi"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Lütfen daha sonra yeniden deneyin",
+ "title": "{0} silinemedi"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Lütfen daha sonra yeniden deneyin"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Lütfen daha sonra yeniden deneyin",
+ "title": "{0} yüklenemedi"
+ },
+ "idWrongFormat": "Profil için sağlanan kimlik beklenen biçimde değil."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "En az bir zaman penceresi seçilmelidir",
+ "tooMany": "En fazla 20 zaman penceresi yapılandırılabilir"
+ }
+ },
+ "endDay": "Günü sonlandır",
+ "endTime": "Bitiş saati",
+ "startDay": "Günü başlat",
+ "startTime": "Başlangıç zamanı",
+ "timeWindowError": "En az bir saatlik zaman penceresi seçin."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Windows 10 ve sonraki sürümler için güncelleştirme kademesi profilleri yüklenemedi."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Windows 10 ve sonraki sürümler için güncelleştirme kademesi",
+ "title": "İş İçin Windows Update"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 ve sonraki sürümler",
+ "title": "Windows 10 ve sonraki sürümler için güncelleştirme kademesi"
+ },
+ "listLoadError": "Windows 10 ve sonraki sürümler için güncelleştirme kademeleri profilleri yüklenemiyor, daha sonra yeniden deneyin",
+ "lowercase": "Güncelleştirme kademesi",
+ "uppercase": "Güncelleştirme Kademesi"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "İlke ayarlarını güncelleştir",
+ "updateRingSettings": "Kademe ayarlarını güncelleştir"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "{0} oluştur",
+ "edit": "{0} Düzenle"
+ }
+ },
+ "notScannedYet": "Henüz taranmadı",
+ "outOfDateIosDevices": "Eski iOS cihazları"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge sürüm 77 ve üzeri",
+ "storeApp": "Mağaza uygulaması",
+ "office365Suite": "Microsoft 365 Uygulamaları",
+ "microsoftDefenderATP": "Uç Nokta için Microsoft Defender",
+ "other": "Diğer",
+ "webApplication": "Web Uygulaması"
+ },
+ "Filters": {
+ "ruleSyntax": "Kural söz dizimi",
+ "filters": "Filtreler"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Lütfen bir bulma betiği seçin",
+ "scriptFileLabel": "Bulma betiğinizi seçin"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "Etkinleştirildiğinde, cihazların bir keşif PowerShell komut dosyasından döndürülen özel verilere dayalı olarak bir JSON dosyasında tanımlanan özel kurallara göre uyumlu olması gerekir.",
+ "label": "Özel Uyumluluk şu anda önizlemede sunuluyor. Genel kullanıma sunulduktan sonra bunu Microsoft Intune'u içeren lisanslama seçeneklerine ek bir maliyetle ekleyebilirsiniz."
+ },
+ "ScriptPicker": {
+ "objectName": "Betik",
+ "placeholder": "Seçmek için tıklayın",
+ "searchboxPlaceholder": "Betik adına göre ara",
+ "title": "Bir bulma betiği seçin"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Özel uyumluluk kuralları özeti"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "JSON dosyasını özel uyumluluk ayarlarınızla karşıya yükleyin ve doğrulayın",
+ "noFileSelectedError": "Lütfen bir json dosyası seçin",
+ "parseFileSelectedError": "json dosyası geçersiz"
+ }
+ },
+ "TAP": {
+ "AccessRequirements": {
+ "infoText": "Kullanıcıların bir iş bağlamındaki uygulamalara erişmek için karşılaması gereken PIN ve kimlik bilgisi gereksinimlerini yapılandırın."
+ },
+ "DataProtection": {
+ "infoText": "Bu grup kesme, kopyalama, yapıştırma ve farklı kaydetme kısıtlamaları gibi Veri Kaybı Önleme (DLP) denetimlerini içerir. Bu ayarlar, kullanıcıların uygulamalardaki verilerle nasıl etkileşim kurduğunu belirler."
+ },
+ "DeviceTypes": {
+ "selectOne": "En az bir cihaz türü seçin."
+ },
+ "TargetedApps": {
+ "TargetToAll": {
+ "label": "Tüm cihaz türlerindeki uygulamaları hedefle"
+ },
+ "infoText": "Bu ilkeyi farklı cihazlardaki uygulamalara nasıl uygulamak istediğinizi seçin. Ardından en az bir uygulama ekleyin.",
+ "selectOne": "İlke oluşturmak için en az bir uygulama seçin."
+ }
+ },
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Uç Nokta için Microsoft Defender",
+ "androidDeviceOwnerApplications": "Uygulamalar",
+ "androidDeviceOwnerPolicyMessages": "Özel destek bilgileri",
+ "androidForWorkPassword": "Cihaz parolası",
+ "appManagement": "Uygulamalara İzin Ver veya Engelle",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Kısıtlı Uygulamalar",
+ "applicationVisibility": "Uygulamaları Göster veya Gizle",
+ "applications": "Uygulama Mağazası",
+ "applicationsAndGames": "Uygulama Mağazası, Belge Görüntüleme, Oyunlar",
+ "applicationsAndGoogle": "Google Play Mağazası",
+ "appsAndExperience": "Uygulamalar ve deneyim",
+ "associatedDomains": "İlişkili etki alanları",
+ "autonomousSingleAppMode": "Otonom Tekli Uygulama Modu",
+ "azureOperationalInsights": "Azure operasyonel içgörüler",
+ "bitLocker": "Windows Şifrelemesi",
+ "bootOptions": "Önyükleme seçenekleri",
+ "browser": "Tarayıcı",
+ "builtinApps": "Yerleşik uygulamalar",
+ "cameras": "Kameralar",
+ "cellular": "Hücresel",
+ "cloudAndStorage": "Bulut ve Depolama",
+ "cloudPrint": "Bulut Yazıcı",
+ "complianceEmailProfile": "E-posta",
+ "connectedDevices": "Bağlı cihazlar",
+ "connectivity": "Şebeke ve bağlantı",
+ "contentCaching": "İçeriği önbelleğe alma",
+ "controlPanelAndSettings": "Denetim Masası ve Ayarlar",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Özel Uyumluluk",
+ "customConfiguration": "Özel Yapılandırma Profili",
+ "customOMASettings": "Özel OMA-URI Ayarları",
+ "customPreferences": "Tercih dosyası",
+ "dFCISecuritySettings": "Güvenlik ayarları",
+ "defender": "Microsoft Defender Virüsten Koruma",
+ "defenderAntivirus": "Microsoft Defender Virüsten Koruma",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows Güvenlik Duvarı",
+ "defenderLocalSecurityOptions": "Yerel cihaz güvenlik seçenekleri",
+ "defenderSecurityCenter": "Microsoft Defender Güvenlik Merkezi",
+ "deliveryOptimization": "Teslim İyileştirme",
+ "derivedCredentialAuthenticationConfiguration": "Türetilmiş kimlik bilgisi",
+ "deviceExperience": "Cihaz deneyimi",
+ "deviceFirmwareConfigurationInterface": "Cihaz Üretici Yazılımı Yapılandırma Arabirimi",
+ "deviceGuard": "Microsoft Defender Uygulama Denetimi",
+ "deviceHealth": "Cihaz Durumu",
+ "devicePassword": "Cihaz parolası",
+ "deviceProperties": "Cihaz Özellikleri",
+ "deviceRestrictions": "Genel",
+ "deviceSecurity": "Sistem güvenliği",
+ "display": "Görüntü",
+ "domainJoin": "Etki Alanına Katılma",
+ "domains": "Etki Alanları",
+ "edgeBrowser": "Microsoft Edge'in eski sürümü (Sürüm 45 ve altı bir sürüm)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge kiosk modu",
+ "editionUpgrade": "Sürüm Yükseltmesi",
+ "education": "Eğitim",
+ "educationDeviceCerts": "Cihaz sertifikaları",
+ "educationStudentCerts": "Öğrenci sertifikaları",
+ "educationTakeATest": "Kendinizi Test Edin",
+ "educationTeacherCerts": "Öğretmen sertifikaları",
+ "emailProfile": "E-posta",
+ "enterpriseDataProtection": "Windows Bilgi Koruması",
+ "extensibleSingleSignOn": "Çoklu oturum açma uygulama uzantısı",
+ "filevault": "FileVault",
+ "firewall": "Güvenlik Duvarı",
+ "games": "Oyunlar",
+ "gatekeeper": "Ağ geçidi denetleyicisi",
+ "healthMonitoring": "İşlevsel durumu izleme",
+ "homeScreenLayout": "Giriş Ekranı Düzeni",
+ "iOSWallpaper": "Duvar Kağıdı",
+ "importedPFX": "PKCS İçe Aktarılan Sertifikası",
+ "iosDefenderAtp": "Uç Nokta için Microsoft Defender",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Çekirdek uzantıları",
+ "keyboardAndDictionary": "Klavye ve sözlük",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Ayrılmış cihazlar",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Kiosk web tarayıcısı",
+ "lockScreenMessage": "Kilit Ekranı İletisi",
+ "lockedScreenExperience": "Kilit Ekranı Deneyimi",
+ "logging": "Raporlama ve Telemetri",
+ "loginItems": "Oturum açma öğeleri",
+ "loginWindow": "Oturum açma penceresi",
+ "macDefenderAtp": "Uç Nokta için Microsoft Defender",
+ "maintenance": "Bakım",
+ "malware": "Kötü Amaçlı Yazılım",
+ "messaging": "Mesajlaşma",
+ "microphonesAndSpeakers": "Mikrofonlar ve hoparlörler",
+ "networkBoundary": "Ağ sınırı",
+ "networkProxy": "Ağ proxy'si",
+ "notifications": "Uygulama Bildirimleri",
+ "pKCS": "PKCS Sertifikası",
+ "password": "Parola",
+ "personalProfile": "Kişisel profil",
+ "personalization": "Kişiselleştirme",
+ "policyOverride": "Grup İlkesini Geçersiz Kılma",
+ "ports": "Bağlantı noktaları",
+ "powerSettings": "Güç Ayarları",
+ "printer": "Yazıcı",
+ "privacy": "Gizlilik",
+ "privacyPerApp": "Uygulama başına gizlilik özel durumları",
+ "privacyPreferences": "Gizlilik tercihleri",
+ "projection": "İzdüşüm",
+ "radios": "Radyolar",
+ "sCCMCompliance": "Configuration Manager Uyumluluğu",
+ "sCEP": "SCEP Sertifikası",
+ "sCEPProperties": "SCEP Sertifikası",
+ "sMode": "Mod anahtarı (yalnızca Windows Insider)",
+ "safari": "Safari",
+ "search": "Ara",
+ "session": "Oturum",
+ "sharedDevice": "Paylaşılan iPad",
+ "sharedPCAccountManager": "Paylaşılan çok kullanıcılı cihaz",
+ "singleSignOn": "Çoklu oturum açma",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Ayarlar",
+ "start": "Başlat",
+ "systemExtensions": "Sistem uzantıları",
+ "systemSecurity": "Sistem Güvenliği",
+ "trustedCert": "Güvenilen Sertifika",
+ "uEFIAccess": "UEFI erişimi",
+ "updates": "Güncelleştirmeler",
+ "userRights": "Kullanıcı Hakları",
+ "usersAndAccounts": "Kullanıcılar ve Hesaplar",
+ "vPN": "Temel VPN",
+ "vPNApps": "Otomatik VPN",
+ "vPNAppsAndTrafficRules": "Uygulamalar ve Trafik Kuralları",
+ "vPNConditionalAccess": "Koşullu Erişim",
+ "vPNConnectivity": "Bağlantı",
+ "vPNDNSTriggers": "DNS Ayarları",
+ "vPNIKEv2": "IKEv2 ayarları",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Bölünmüş Tünel",
+ "vPNTrustedNetwork": "Güvenilen Ağ Algılama",
+ "wakeSettings": "Uyandırma ayarları",
+ "webContentFilter": "Web İçeriği Filtresi",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Uç Nokta için Microsoft Defender",
+ "windowsDefenderATP": "Uç Nokta için Microsoft Defender",
+ "windowsHelloForBusiness": "İş için Windows Hello",
+ "windowsSpotlight": "Windows Spot",
+ "wiredNetwork": "Kablolu ağ",
+ "wireless": "Kablosuz",
+ "wirelessProjection": "Kablosuz projeksiyon",
+ "workProfile": "İş profili ayarları",
+ "workProfilePassword": "İş profili parolası",
+ "xboxServices": "Xbox hizmetleri",
+ "zebraMx": "MX profili (yalnızca Zebra)",
+ "complianceActionsLabel": "Uyumsuzluk eylemleri"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "İzin verilen URL'ler",
+ "tooltip": "Kullanıcılarınızın iş bağlamında erişmelerine izin verilen siteleri belirtin. Diğer sitelere izin verilmez. Bir izin verilenler/engellenenler listesi yapılandırmayı seçebilirsiniz, ancak her ikisini birden belirtemezsiniz. "
+ },
+ "ApplicationProxyRedirection": {
+ "header": "Uygulama proxy'si",
+ "title": "Uygulama ara sunucusu yeniden yönlendirme",
+ "tooltip": "Kullanıcılara şirket bağlantılarına ve şirket içi Web uygulamalarına erişim vermek için Uygulama ara sunucusu yeniden yönlendirmesini etkinleştirin."
+ },
+ "BlockedURLs": {
+ "title": "Engellenen URL'ler",
+ "tooltip": "Kullanıcılarınız için, iş bağlamında engellenen siteleri belirtin. Diğer tüm sitelere izin verilecek. Bir izin verilenler/engellenenler listesi yapılandırmayı seçebilirsiniz, ancak her ikisini birden belirtemezsiniz. "
+ },
+ "Bookmarks": {
+ "header": "Yönetilen yer imleri",
+ "tooltip": "Kullanıcılarınızın iş bağlamında Microsoft Edge kullanırken kullanabileceği yer işaretli URL'ler listesini girin.",
+ "uRL": "URL"
+ },
+ "HomepageURL": {
+ "header": "Yönetilen giriş sayfası",
+ "title": "Giriş sayfası kısayol URL'si",
+ "tooltip": "Microsoft Edge'de yeni bir sekme açıldığında arama çubuğunun altındaki ilk simge olarak kullanıcılara gösterilecek bir giriş sayfası kısayolu yapılandırın."
+ },
+ "PersonalContext": {
+ "label": "Kısıtlı siteleri kişisel bağlama yönlendir",
+ "tooltip": "Kullanıcıların kısıtlanmış siteleri açmak için kişisel bağlamlarına geçiş yapmasına izin verilip verilmeyeceğini yapılandırın."
+ }
+ },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home SKU'su",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\r\nor\r\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Anahtarda bulunan bit sayısını seçin.",
- "keyUsage": "Sertifikanın ortak anahtarını değiştirmek için gereken şifreleme eylemini belirtin.",
- "renewalThreshold": "Cihazın sertifika yenilemesi isteyebilmesi için izin verilen en yüksek kalan sertifika ömrü yüzdesini (yüzde 1 ila 99) girin. Intune'da tavsiye edilen miktar %20'dir (1-99).",
- "rootCert": "Önceden yapılandırılmış ve atanmış bir kök CA sertifikası profili seçin. CA sertifikası, bu profil (şu anda yapılandırdığınız) için sertifikayı veren CA'nın kök sertifikası ile eşleşmelidir.",
- "scepServerUrl": "SCEP aracılığıyla sertifika veren NDES Sunucusu için bir URL girin (HTTPS olmalıdır). Örneğin https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "SCEP aracılığıyla sertifika veren NDES Sunucusu için bir veya daha fazla URL ekleyin (HTTPS olmalıdır). Örneğin https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Konu diğer adı",
- "subjectNameFormat": "Konu adı biçimi",
- "validityPeriod": "Sertifikanın süresinin dolmasına kalan süre miktarı. Sertifika şablonunda gösterilen geçerlilik süresine eşit veya bundan daha düşük bir değer girin. Varsayılan olarak bir yıl ayarlanır."
- },
- "appInstallContext": "Bu uygulamayla ilişkilendirilecek yükleme bağlamını belirtir. İkili mod uygulamaları için bu uygulama için istenen bağlamı seçin. Bu seçenek, diğer tüm uygulamalar için pakete göre önceden belirlenir ve değiştirilemez.",
- "autoUpdateMode": "Uygulamanın güncelleştirme önceliğini yapılandırın. Uygulamayı güncelleştirmeden önce cihazın WiFi'ya bağlı, şarj ediliyor ve etkin olarak kullanımda olmamasını zorunlu kılmak için Varsayılan'ı seçin. Uygulamayı, geliştirici yayımladıktan hemen sonra; şarj durumuna, WiFi özelliğine veya cihazdaki son kullanıcı etkinliğine bakılmaksızın güncelleştirmek için Yüksek Öncelik'i seçin. Uygulama güncelleştirmelerini en fazla 90 güne kadar ötelemek için Ertelendi’yi seçin. Yüksek öncelik ve ertelendi yalnızca DO cihazlarında etkinleştirilir.",
- "configurationSettingsFormat": "Yapılandırma ayarları biçim metni",
- "ignoreVersionDetection": "Bunu, uygulama geliştiricisinin otomatik güncelleştirdiği uygulamalar (örneğin Google Chrome) için “Evet” olarak ayarlayın.",
- "ignoreVersionDetectionMacOSLobApp": "Uygulama geliştiricisi tarafından otomatik olarak güncelleştirilen uygulamalar veya yüklemeden önce yalnızca uygulama paketi kimliğini denetlemek için \"Evet\" seçeneğini belirleyin. Yüklemeden önce uygulama paketi kimliğini ve sürüm numarasını denetlemek için \"Hayır\" seçeneğini belirleyin.",
- "installAsManagedMacOSLobApp": "Bu ayar yalnızca macOS 11 ve üzeri için geçerlidir. Uygulama yüklenecek ancak macOS 10.15 ve önceki sürümlerde yönetilmeyecek.",
- "installContextDropdown": "Uygun yükleme bağlamını seçin. Cihaz bağlamı uygulamayı cihaza tüm kullanıcılar için yüklerken, kullanıcı bağlamı uygulamayı yalnızca hedeflenen kullanıcı için yükler.",
- "ldapUrl": "Bu, istemcilerin e-posta alıcıları için genel şifreleme anahtarlarını alabileceği LDAP ana bilgisayar adıdır. Anahtar kullanılabilir olduğunda e-postalar şifrelenir. Desteklenen biçimler:
ldap.example.com
\r\n
ldap.example.com:123
\r\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\r\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "İlişkili uygulama için çalışma zamanı izinlerini seçin.",
- "policyAssociatedApp": "Bu ilkenin ilişkilendirileceği uygulamayı seçin.",
- "policyConfigurationSettings": "Bu ilke için yapılandırma ayarlarını tanımlarken kullanmak istediğiniz yöntemi seçin.",
- "policyDescription": "İsteğe bağlı olarak, bu yapılandırma ilkesi için bir açıklama girebilirsiniz.",
- "policyEnrollmentType": "Bu ayarların cihaz yönetimi üzerinden mi yoksa Intune SDK'sı ile oluşturulan uygulamalar ile mi yönetileceğini seçin.",
- "policyName": "Bu yapılandırma ilkesi için bir ad girin.",
- "policyPlatform": "Bu uygulama yapılandırma ilkesinin geçerli olacağı platformu seçin.",
- "policyProfileType": "Bu uygulama yapılandırma profilinin uygulanacağı cihaz profili türlerini seçin",
- "policySMime": "Outlook S/MIME imzalama ve şifreleme ayarlarını yapılandırın.",
- "sMimeDeployCertsFromIntune": "Intune'dan Outlook ile kullanılmak üzere S/MIME sertifikaları dağıtılıp dağıtılmayacağını belirtin.\r\nIntune tüm imzalama ve şifreleme sertifikalarını Şirket Portalı aracılığıyla kullanıcılara dağıtır.",
- "sMimeEnable": "E-posta oluştururken S/MIME denetimlerinin etkin olup olmayacağını belirtin",
- "sMimeEnableAllowChange": "Kullanıcının, S/MIME etkinleştir ayarını değiştirmesine izin verilip verilmediğini belirtin.",
- "sMimeEncryptAllEmails": "Tüm e-postaların şifrelenip şifrelenmeyeceğini belirtin.\r\nŞifreleme, verileri şifre metnine dönüştürdüğünden metni yalnızca hedeflenen alıcı okuyabilir.",
- "sMimeEncryptAllEmailsAllowChange": "Kullanıcının, Tüm e-postaları şifrele ayarını değiştirmesine izin verilip verilmediğini belirtin.",
- "sMimeEncryptionCertProfile": "E-posta şifrelemesi için sertifika profilini belirtin.",
- "sMimeSignAllEmails": "Tüm e-postaların imzalanıp imzalanmayacağını belirtin.\r\nDijital imza, e-postanın gerçek olduğunu doğrular ve aktarım sırasında içerikle oynanmamasını sağlar.",
- "sMimeSignAllEmailsAllowChange": "Kullanıcının, Tüm e-postaları imzala ayarını değiştirmesine izin verilip verilmediğini belirtin.",
- "sMimeSigningCertProfile": "E-posta imzalaması için sertifika profilini belirtin.",
- "sMimeUserNotificationType": "Kullanıcıları Outlook için S/MIME sertifikalarını almak üzere Şirket Portalı'nı açmaları gerektiği konusunda bilgilendirme yöntemi."
- },
+ "Languages": {
+ "ar-aE": "Arapça (B.A.E.)",
+ "ar-bH": "Arapça (Bahreyn)",
+ "ar-dZ": "Arapça (Cezayir)",
+ "ar-eG": "Arapça (Mısır)",
+ "ar-iQ": "Arapça (Irak)",
+ "ar-jO": "Arapça (Ürdün)",
+ "ar-kW": "Arapça (Kuveyt)",
+ "ar-lB": "Arapça (Lübnan)",
+ "ar-lY": "Arapça (Libya)",
+ "ar-mA": "Arapça (Fas)",
+ "ar-oM": "Arapça (Umman)",
+ "ar-qA": "Arapça (Katar)",
+ "ar-sA": "Arapça (Suudi Arabistan)",
+ "ar-sY": "Arapça (Suriye)",
+ "ar-tN": "Arapça (Tunus)",
+ "ar-yE": "Arapça (Yemen)",
+ "az-cyrl": "Azerice (Kiril, Azerbaycan)",
+ "az-latn": "Azerice (Latin, Azerbaycan)",
+ "bn-bD": "Bengalce (Bangladeş)",
+ "bn-iN": "Bengalce (Hindistan)",
+ "bs-cyrl": "Boşnakça (Kiril)",
+ "bs-latn": "Boşnakça (Latin)",
+ "zh-cN": "Çince (ÇHC)",
+ "zh-hK": "Çince (Hong Kong ÖİB)",
+ "zh-mO": "Çince (Macao ÖİB)",
+ "zh-sG": "Çince (Singapur)",
+ "zh-tW": "Çince (Tayvan)",
+ "hr-bA": "Hırvatça (Latin)",
+ "hr-hR": "Hırvatça (Hırvatistan)",
+ "nl-bE": "Felemenkçe (Belçika)",
+ "nl-nL": "Felemenkçe (Hollanda)",
+ "en-aU": "İngilizce (Avustralya)",
+ "en-bZ": "İngilizce (Belize)",
+ "en-cA": "İngilizce (Kanada)",
+ "en-cabn": "İngilizce (Karayipler)",
+ "en-iE": "İngilizce (İrlanda)",
+ "en-iN": "İngilizce (Hindistan)",
+ "en-jM": "İngilizce (Jamaika)",
+ "en-mY": "İngilizce (Malezya)",
+ "en-nZ": "İngilizce (Yeni Zelanda)",
+ "en-pH": "İngilizce (Filipinler Cumhuriyeti)",
+ "en-sG": "İngilizce (Singapur)",
+ "en-tT": "İngilizce (Trinidad ve Tobago)",
+ "en-uK": "İngilizce (Birleşik Krallık)",
+ "en-uS": "İngilizce (Amerika Birleşik Devletleri)",
+ "en-zA": "İngilizce (Güney Afrika)",
+ "en-zW": "İngilizce (Zimbabve)",
+ "fr-bE": "Fransızca (Belçika)",
+ "fr-cA": "Fransızca (Kanada)",
+ "fr-cH": "Fransızca (İsviçre)",
+ "fr-fR": "Fransızca (Fransa)",
+ "fr-lU": "Fransızca (Luksemburg)",
+ "fr-mC": "Fransızca (Monako)",
+ "de-aT": "Almanca (Avusturya)",
+ "de-cH": "Almanca (İsviçre)",
+ "de-dE": "Almanca (Almanya)",
+ "de-lI": "Almanca (Liechtenstein)",
+ "de-lU": "Almanca (Luksemburg)",
+ "iu-cans": "İnuit dili (Hece yazısı, Kanada)",
+ "iu-latn": "İnuit dili (Latin, Kanada)",
+ "it-cH": "İtalyanca (İsviçre)",
+ "it-iT": "İtalyanca (İtalya)",
+ "ms-bN": "Malay dili (Brunei Sultanlığı)",
+ "ms-mY": "Malay dili (Malezya)",
+ "mn-cN": "Moğolca (Geleneksel Moğolca, ÇHC)",
+ "mn-mN": "Moğolca (Kiril, Moğolistan)",
+ "no-nB": "Norveççe, Bokmål (Norveç)",
+ "no-nn": "Norveç dili (Nynorsk, (Norveç)",
+ "pt-bR": "Portekizce (Brezilya)",
+ "pt-pT": "Portekizce (Portekiz)",
+ "quz-bO": "Keçuva dili (Bolivya)",
+ "quz-eC": "Keçuva dili (Ekvador)",
+ "quz-pE": "Keçuva dili (Peru)",
+ "smj-nO": "Sami, Lule (Norveç)",
+ "smj-sE": "Sami, Lule (İsveç)",
+ "se-fI": "Sami, Kuzey (Finlandiya)",
+ "se-nO": "Sami, Kuzey (Norveç)",
+ "se-sE": "Sami, Kuzey (İsveç)",
+ "sma-nO": "Sami, Güney (Norveç)",
+ "sma-sE": "Sami, Güney (İsveç)",
+ "smn": "Sami, Inari (Finlandiya)",
+ "sms": "Sami, Skolt (Finlandiya)",
+ "sr-Cyrl-bA": "Sırpça (Kiril)",
+ "sr-Cyrl-rS": "Sırpça (Kiril, Sırbistan ve Karadağ)",
+ "sr-Latn-bA": "Sırpça (Latin)",
+ "sr-Latn-rS": "Sırpça (Latin, Sırbistan)",
+ "dsb": "Aşağı Sorb dili (Almanya)",
+ "hsb": "Yukarı Sorb dili (Almanya)",
+ "es-es-tradnl": "İspanyolca (İspanya, Geleneksel Sıralama)",
+ "es-aR": "İspanyolca (Arjantin)",
+ "es-bO": "İspanyolca (Bolivya)",
+ "es-cL": "İspanyolca (Şili)",
+ "es-cO": "İspanyolca (Kolombiya)",
+ "es-cR": "İspanyolca (Kosta Rika)",
+ "es-dO": "İspanyolca (Dominik Cumhuriyeti)",
+ "es-eC": "İspanyolca (Ekvator)",
+ "es-eS": "İspanyolca (İspanya)",
+ "es-gT": "İspanyolca (Guatemala)",
+ "es-hN": "İspanyolca (Honduras)",
+ "es-mX": "İspanyolca (Meksika)",
+ "es-nI": "İspanyolca (Nikaragua)",
+ "es-pA": "İspanyolca (Panama)",
+ "es-pE": "İspanyolca (Peru)",
+ "es-pR": "İspanyolca (Porto Riko)",
+ "es-pY": "İspanyolca (Paraguay)",
+ "es-sV": "İspanyolca (El Salvador)",
+ "es-uS": "İspanyolca (Amerika Birleşik Devletleri)",
+ "es-uY": "İspanyolca (Uruguay)",
+ "es-vE": "İspanyolca (Venezuela)",
+ "sv-fI": "İsveç dili (Finlandiya)",
+ "uz-cyrl": "Özbekçe (Kiril, Özbekistan)",
+ "uz-latn": "Özbekçe (Latin, Özbekistan)",
+ "af": "Afrikaner dili (Güney Afrika)",
+ "sq": "Arnavutça (Arnavutluk)",
+ "am": "Amhara dili (Etiyopya)",
+ "hy": "Ermenice (Ermenistan)",
+ "as": "Assam dili (Hindistan)",
+ "ba": "Başkırtça (Rusya)",
+ "eu": "Baskça (Baskça)",
+ "be": "Belarusça (Belarus)",
+ "br": "Bretonca (Fransa)",
+ "bg": "Bulgarca (Bulgaristan)",
+ "ca": "Katalanca (Katalanca)",
+ "co": "Korsika lehçesi (Fransa)",
+ "cs": "Çekçe (Çek Cumhuriyeti)",
+ "da": "Danca (Danimarka)",
+ "dv": "Divehi (Maldivler)",
+ "et": "Estonca (Estonya)",
+ "fo": "Faroe dili (Faroe Adaları)",
+ "fil": "Filipin dili (Filipinler)",
+ "fi": "Fince (Finlandiya)",
+ "gl": "Galiçya dili (Galiçya)",
+ "ka": "Gürcüce (Gürcistan)",
+ "el": "Yunanca (Yunanistan)",
+ "gu": "Gucerat dili (Hindistan)",
+ "ha": "Hausa dili (Latin, Nijerya)",
+ "he": "İbranice (İsrail)",
+ "hi": "Hintçe (Hindistan)",
+ "hu": "Macarca (Macaristan)",
+ "is": "İzlandaca (İzlanda)",
+ "ig": "İgbo dili (Nijerya)",
+ "id": "Endonezce (Endonezya)",
+ "ga": "İrlandaca (Irlanda)",
+ "xh": "Zosa dili (Güney Afrika)",
+ "zu": "Zuluca (Güney Afrika)",
+ "ja": "Japonca (Japonya)",
+ "kn": "Kannada dili (Hindistan)",
+ "kk": "Kazakça (Kazakistan)",
+ "km": "Khmer (Kamboçya)",
+ "rw": "Kinyarvanda dili (Ruanda)",
+ "sw": "Svahili dili (Kenya)",
+ "kok": "Konkani Dili (Hindistan)",
+ "ko": "Korece (Güney Kore)",
+ "ky": "Kırgızca (Kırgızistan)",
+ "lo": "Lao dili (Lao ÖİB)",
+ "lv": "Letonca (Letonya)",
+ "lt": "Litvanca (Litvanya)",
+ "lb": "Lüksemburg dili (Lüksemburg)",
+ "mk": "Makedonca (Kuzey Makedonya)",
+ "ml": "Malayalam dili (Hindistan)",
+ "mt": "Malta dili (Malta)",
+ "mi": "Maori dili (Yeni Zelanda)",
+ "mr": "Marathi (Hindistan)",
+ "moh": "Mohavk dili (Mohavk)",
+ "ne": "Nepal dili (Nepal)",
+ "oc": "Oksitan dili (Fransa)",
+ "or": "Odia (Hindistan)",
+ "ps": "Peştuca (Afganistan)",
+ "fa": "Farsça",
+ "pl": "Lehçe (Polonya)",
+ "pa": "Pencap dili (Hindistan)",
+ "ro": "Rumence (Romanya)",
+ "rm": "Romanş dili (İsviçre)",
+ "ru": "Rusça (Rusya)",
+ "sa": "Sanskritçe (Hindistan)",
+ "st": "Kuzey Sotho Dili (Güney Afrika)",
+ "tn": "Setsvana dili (Güney Afrika)",
+ "si": "Sinhali dili (Sri Lanka)",
+ "sk": "Slovakça (Slovakya)",
+ "sl": "Slovence (Slovenya)",
+ "sv": "İsveççe (İsveç)",
+ "syr": "Süryanice (Suriye)",
+ "tg": "Tacikçe (Kiril, Tacikistan)",
+ "ta": "Tamil dili (Hindistan)",
+ "tt": "Tatarca (Rusça)",
+ "te": "Telugu dili (Hindistan)",
+ "th": "Tayca (Tayland)",
+ "bo": "Tibetçe (ÇHC)",
+ "tr": "Türkçe (Türkiye)",
+ "tk": "Türkmence (Türkmenistan)",
+ "uk": "Ukraynaca (Ukrayna)",
+ "ur": "Urduca (Pakistan İslam Cumhuriyeti)",
+ "vi": "Vietnamca (Vietnam)",
+ "cy": "Galce (Birleşik Krallık)",
+ "wo": "Volof dili (Senegal)",
+ "ii": "Yi dili (ÇHC)",
+ "yo": "Yorubaca (Nijerya)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Yerleşik Rol",
+ "customCloudPCRole": "Özel Windows 365 rolü",
+ "customIntuneRole": "Özel Intune rolü",
+ "customRole": "Özel Rol"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "Uygulama Sürümü",
+ "dependencyName": "Bağımlılık adı",
+ "lastModifiedTime": "Son değiştirme zamanı",
+ "relationship": "İlişki",
+ "replaced": "Değiştirildi",
+ "searchPlaceholder": "Uygulama adına göre filtreleyin",
+ "status": "Durum ayrıntıları",
+ "statusDetails": "Durum",
+ "supersedenceName": "Yerine geçme adı"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Alt bağımlılık",
+ "indirectSupersedence": "Doğrudan ilgili değil",
+ "supersedenceAncestors": "Yenisiyle değiştiriliyor",
+ "supersedenceDescendants": "Yenisiyle değiştirilmiş"
+ },
+ "SupersededReplaced": {
+ "no": "Hayır",
+ "yes": "Evet"
+ },
+ "Tabs": {
+ "chart": "Grafik",
+ "dependency": "Bağımlılık",
+ "label": "Görünüm: ",
+ "supersedence": "Yerine geçme",
+ "table": "Tablo"
+ },
+ "dependencyGraphAriaLabel": "Uygulama bağımlılık grafiği",
+ "supersedenceGraphAriaLabel": "Uygulama yerine geçme grafiği"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Yeniden başlatma zorlanmadan önce beklenecek gün sayısı"
+ },
+ "Description": {
+ "label": "Açıklama"
+ },
+ "Name": {
+ "label": "Ad"
+ },
+ "QualityUpdateRelease": {
+ "label": "Cihaz işletim sistemi sürümü şundan düşükse kalite güncelleştirmeleri yüklemesini hızlandır:"
+ },
+ "bladeTitle": "Kalite güncelleştirmeleri Windows 10 ve sonrası (önizleme)",
+ "loadError": "Yüklenemedi!"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Ayarlar"
+ },
+ "infoBoxText": "Windows 10 ve sonrası için mevcut güncelleştirme kademeleri ilkesi dışında şu anda kullanılabilir tek ayrılmış kalite güncelleştirmesi denetimi, belirtilen yama seviyesinin gerisinde kalan cihazlar için kalite güncelleştirmelerini hızlandırabilir. Gelecekte ek denetimler kullanıma sunulacaktır.",
+ "licenseLearnMoreText": "Önkoşullar ve kalite güncelleştirmesi ilkeleri hakkında daha fazla bilgi edinin.",
+ "licenseWarningBoxText": "Kalite güncelleştirmesi ilkeleri oluşturmak belirli lisanslar gerektirir.",
+ "warningBoxText": "Yazılım güncelleştirmelerinin hızlandırılması, gerektiğinde uyumluluğa ulaşma süresinin kısaltılmasına yardımcı olabilir ve son kullanıcı üretkenliği üzerinde daha büyük bir etkiye sahiptir. Mesai saatleri içinde yeniden başlatma deneyimi yaşama olasılıkları önemli ölçüde artar."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "Android'de PIN yerine parmak izi kimliği kullanılmasına izin verebilirsiniz. Kullanıcılardan, iş hesaplarıyla bu uygulamaya erişirken parmak izlerini sağlamaları istenir.",
+ "iOS": "iOS/iPadOS cihazlarında, PIN numarası yerine parmak izi tanımlaması kullanımına izin verebilirsiniz. Kullanıcılar iş hesaplarını kullanarak bu uygulamaya eriştiklerinde, parmak izlerini sağlamaları istenir.",
+ "mac": "Mac cihazlarda PIN numarası yerine parmak izi kullanımına izin verebilirsiniz. Kullanıcılar iş hesaplarını kullanarak bu uygulamaya eriştiklerinde, parmak izlerini sağlamaları istenir."
+ },
+ "allowWidgetContentSync": "İlkeyle yönetilen uygulamaların uygulama arabirim öğelerine veri kaydetmesini engellemek için Engelle’yi seçin. İzin ver’i seçerseniz, bu özellikler ilkeyle yönetilen uygulamada destekleniyorsa ve etkin durumdaysa ilkeyle yönetilen uygulama verileri uygulama arabirim öğelerine kaydedebilir. \r\n\r\n \r\n\r\nUygulamalar uygulama yapılandırması ilkeleri aracılığıyla ek yapı yeteneği sunabilir. Daha fazla bilgi için uygulamanın belgelerine bakın.",
+ "appSharingFromLevel1": "Bu uygulamanın veri alabileceği uygulamaları belirtmek için aşağıdaki seçeneklerden birini belirtin:",
+ "appSharingFromLevel2": "{0}: Kuruluş belgeleri veya hesaplarındaki verilerin yalnızca ilkeyle yönetilen diğer uygulamalardan alınmasına izin ver",
+ "appSharingFromLevel3": "{0}: Kuruluş belgeleri veya hesaplarındaki verilerin tüm uygulamalardan alınmasına izin ver",
+ "appSharingFromLevel4": "{0}: Kuruluş belgeleri veya hesaplarındaki verilerin tüm uygulamalardan alınmasına izin verme",
+ "appSharingFromLevel5": "{0}: Tüm uygulamalardan veri aktarımına izin ver ve bir kullanıcı kimliği olmayan tüm gelen verileri kuruluş verileri olarak değerlendir.",
+ "appSharingToLevel1": "Bu uygulamanın veri gönderebileceği uygulamaları belirtmek için aşağıdaki seçeneklerden birini belirtin:",
+ "appSharingToLevel2": "{0}: Yalnızca ilkeyle yönetilen diğer uygulamalara kuruluş verileri gönderilmesine izin ver",
+ "appSharingToLevel3": "{0}: Tüm uygulamalara kuruluş verileri gönderilmesine izin ver",
+ "appSharingToLevel4": "{0}: Hiçbir uygulamaya kuruluş verileri gönderilmesine izin verme",
+ "appSharingToLevel5": "{0}: Kayıtlı cihazlarda yalnızca ilke ile yönetilen uygulamalara aktarıma ve diğer MDM ile yönetilen uygulamara dosya aktarımına izin ver",
+ "appSharingToLevel6": "{0}: Yalnızca ilke ile yönetilen uygulamalara aktarıma izin ver ve Birlikte Aç/Paylaş iletişim kutularını yalnızca ilke ile yönetilen uygulamaları görüntüleyecek şekilde filtrele",
+ "assignmentFilterEdit1": "Bu ilkeye atama filtreleri eklerseniz 'Cihaz Yönetimi Türü' özelliği, 'Uygulamalar' sayfasında 'Tüm cihaz türlerinde uygulamalara hedefle' ve 'Cihaz türleri' için belirtilen değerlere ek olarak uygulanır.",
+ "assignmentFilterEdit2": "Uygulama Koruma ilkeleri atama hakkında daha fazla bilgi edinin.",
+ "conditionalEncryption1": "Kayıtlı bir cihazda cihaz şifrelemesi algılandığında dahili uygulama depolaması için uygulama şifrelemesini devre dışı bırakmak üzere {0} seçeneğini belirleyin.",
+ "conditionalEncryption2": "Not: Intune yalnızca Intune MDM ile cihaz kaydını algılayabilir. Verilere yönetilmeyen uygulamalar tarafından erişilmediğinden emin olmak için harici uygulama depolaması yine de şifrelenir.",
+ "contactSyncMac": "Devre dışı bırakılırsa uygulamalar yerel adres defterine kişi kaydedemez.",
+ "contactsSync": "İlke tarafından yönetilen uygulamaların verileri cihazın yerel uygulamalarına (Kişiler, Takvim ve pencere öğeleri) kaydetmesini ve ilke tarafından yönetilen uygulamalardaki eklentilerin kullanılmasını önlemek için Engelle seçeneğini belirleyin. İzin ver seçeneğini belirlerseniz, bu özellikler ilke tarafından yönetilen uygulamada destekleniyorsa ve etkinse ilke tarafından yönetilen uygulama, verileri yerel uygulamalara kaydedebilir veya eklentileri kullanabilir.
Uygulamalar, uygulama yapılandırma ilkeleriyle ek yapılandırma özelliği sağlayabilir. Daha fazla bilgi için uygulamanın belgelerine bakın.",
+ "deviceTypeTargetingCreate1": "Cihaz türü hedefleme, ilke oluşturmada Atamalar adımına taşındı.",
+ "deviceTypeTargetingEdit1": "Bu ilkeye atama filtreleri eklerseniz 'Cihaz Yönetimi Türü' özelliği, 'Uygulamalar' sayfasında 'Tüm cihaz türlerinde uygulamalara hedefle' ve 'Cihaz türleri' için belirtilen değerlere ek olarak uygulanır.",
+ "deviceTypeTargetingEdit2": "Cihaz yönetim türü hedeflemesini düzenlemek için 'Tüm cihaz türlerinde uygulamaları hedefle' = 'Evet' seçeneğini sıfırlayın. Daha sonra 'Cihaz Yönetimi Türü' için istenen değerleri içeren bir MAM atama filtresi oluşturun.",
+ "deviceTypeTargetingHasMoved": "Uygulama Koruma İlkeleri hakkında daha fazla bilgi edinin",
+ "encryptionAndroid1": "Intune mobil uygulama yönetim ilkesiyle ilişkilendirilen uygulamalar için, şifreleme Microsoft tarafından sağlanır. Veriler, mobil uygulama yönetimi ilkesindeki ayara göre dosya G/Ç işlemleri sırasında eş zamanlı olarak şifrelenir. Android üzerindeki yönetilen uygulamalar, platform şifreleme kitaplıklarından yararlanan CBC modunda AES-128 şifrelemesini kullanır. Şifreleme yöntemi FIPS 140-2 uyumlu değildir. SHA-256 şifrelemesi, SigAlg parametresini kullanan açık bir yönerge olarak desteklenir ve yalnızca 4.2 ve üzeri cihazlarda çalışır. Cihaz depolama alanındaki içerikler her zaman şifrelenir.",
+ "encryptionAndroid2": "Uygulama ilkenizde şifreleme gerektirdiğinizde, cihazlarına erişmek için son kullanıcıların bir PIN ayarlaması ve kullanması gerekir. Cihaz erişimi için ayarlanmış bir PIN yoksa uygulamalar başlatılmaz ve son kullanıcıya “Şirketiniz, bu uygulamaya erişmek için öncelikle bir cihaz PIN'i etkinleştirmenizi gerektirdi.\" iletisi görüntülenir.",
+ "encryptionMac1": "Intune mobil uygulama yönetim ilkesiyle ilişkilendirilen uygulamalar için şifreleme Microsoft tarafından sağlanır. Veriler, mobil uygulama yönetimi ilkesindeki ayara göre dosya G/Ç işlemleri sırasında eş zamanlı olarak şifrelenir. Mac üzerindeki yönetilen uygulamalar, platform şifreleme kitaplıklarından yararlanan CBC modunda AES-128 şifrelemesini kullanır. Şifreleme yöntemi FIPS 140-2 uyumlu değildir. SHA-256 şifrelemesi, SigAlg parametresini kullanan açık bir yönerge olarak desteklenir ve yalnızca 4.2 ve üzeri cihazlarda çalışır. Cihaz depolama alanındaki içerikler her zaman şifrelenir.",
+ "faceId1": "Uygun olan yerlerde, PIN yerine yüz tanıma kullanımına izin verebilirsiniz. Kullanıcılar iş hesapları ile bu uygulamaya eriştiklerinde yüz kimliği sağlamaları istenir.",
+ "faceId2": "Uygulama erişimi için PIN yerine yüz tanıma kullanmaya izin vermek için Evet seçeneğine tıklayın.",
+ "managementLevelsAndroid1": "Bu ilkenin, Android cihaz yöneticisi cihazları, Android Enterprise cihazları veya yönetilmeyen cihazlar için geçerli olup olmayacağını belirtmek üzere bu seçeneği kullanın.",
+ "managementLevelsAndroid2": "{0}: Yönetilmeyen cihazlar, Intune MDM yönetiminin algılanmadığı cihazlardır. Bu, 3. taraf MDM satıcılarını içerir.",
+ "managementLevelsAndroid3": "{0}: Android Cihaz Yönetimi API'sini kullanan Intune tarafından yönetilen cihazlar.",
+ "managementLevelsAndroid4": "{0}: Android Enterprise İş Profilleri veya Android Enterprise Tam Cihaz Yönetimi kullanan, Intune tarafından yönetilen cihazlar.",
+ "managementLevelsIos1": "Bu ilkenin MDM yönetilen cihazlar veya yönetilmeyen cihazlara uygulanıp uygulanmayacağını belirtmek için bu seçeneği kullanın.",
+ "managementLevelsIos2": "{0}: Yönetilmeyen cihazlar, Intune MDM yönetiminin algılanmadığı cihazlardır. Bu, 3. taraf MDM satıcılarını içerir.",
+ "managementLevelsIos3": "{0}: Yönetilen cihazlar, Intune MDM tarafından yönetilir.",
+ "minAppVersion": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması gereken en düşük Uygulama sürümünü belirtin.",
+ "minAppVersionWarning": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması önerilen en düşük Uygulama sürümünü belirtin.",
+ "minOsVersion": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması gereken en düşük işletim sistemi sürümünü belirtin.",
+ "minOsVersionWarning": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması önerilen en düşük işletim sistemi sürümünü belirtin.",
+ "minPatchVersion": "Kullanıcının uygulamaya güvenli erişmek için sahip olabileceği en eski gerekli Android güvenlik düzeltme eki düzeyini tanımlayın.",
+ "minPatchVersionWarning": "Kullanıcının uygulamaya güvenli erişmek için sahip olabileceği en eski önerilen Android güvenlik düzeltme eki düzeyini tanımlayın.",
+ "minSdkVersion": "Bir kullanıcının uygulamaya güvenli erişim sağlaması için sahip olması gereken en düşük Intune Uygulama Koruma İlkesi SKD'sı sürümünü belirtin.",
+ "requireAppPinDefault": "
Kayıtlı bir cihazda cihaz kilidi algılandığında uygulama PIN'ini devre dışı bırakmak için Evet'i seçin.
",
+ "targetAllApps1": "İlkenizi herhangi bir yönetim durumunda olan cihazlardaki uygulamalara hedeflemek için bu seçeneği kullanın.",
+ "targetAllApps2": "Kullanıcının ilkesi belirli bir yönetim durumu için hedeflendiyse ilke çatışması çözümleme sırasında bu ayarın yerine geçilir.",
+ "touchId2": "Uygulama erişiminde PIN numarası yerine parmak izi kimliğini zorunlu kılmak için {0} seçeneğini belirtin."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "PIN numarasının kullanıcı tarafından sıfırlanması gerekmeden önce geçmesi gereken gün sayısını belirtin.",
+ "previousPinBlockCount": "Bu ayar, Intune'un koruyacağı önceki PIN'lerin sayısını belirtir. Tüm yeni PIN'ler, Intune'un koruduğu PIN'lerden farklı olmalıdır."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "Bu Windows Search'ün şifrelenmiş verileri aramaya devam etmesine izin verir.",
+ "authoritativeIpRanges": "Windows'un IP aralıklarını otomatik algılamasını geçersiz kılmak istiyorsanız bu ayarı etkinleştirin.",
+ "authoritativeProxyServers": "Windows'un ara sunucuları otomatik algılamasını geçersiz kılmak istiyorsanız bu ayarı etkinleştirin.",
+ "checkInput": "Girişin geçerliliğini denetleyin",
+ "dataRecoveryCert": "Kurtarma sertifikası, şifreleme anahtarınız kaybolduğunda veya zarar gördüğünde şifreli dosyaları kurtarmak için kullanabileceğiniz özel bir Şifreleme Dosya Sistemi (EFS) sertifikasıdır. Kurtarma sertifikasını burada oluşturup belirtmeniz gerekir. Daha fazla bilgiyi burada bulabilirsiniz",
+ "enterpriseCloudResources": "
Kurumsal olarak değerlendirilecek ve Windows Bilgi Koruması ilkesiyle korunacak bulut kaynaklarını belirtin. Girişler '|' karakteriyle ayrılarak birden çok kaynak belirtilebilir.
Şirketinizde yapılandırılmış bir proxy varsa, belirttiğiniz bulut kaynaklarına giden trafiğin hangi proxy üzerinden yönlendirileceğini belirtebilirsiniz.
Kurumsal ağınızı oluşturan IPv4 aralıklarını belirtin. Bunlar, kurumsal ağ sınırınızı tanımlamak için belirttiğiniz Kurumsal Ağ Etki Alanı Adları ile birlikte kullanılır.
Bu ayar, Windows Bilgi Koruması'nı etkinleştirmek için gereklidir.
Girişler virgülle ayrılarak birden çok aralık belirtilebilir.
Kurumsal ağınızı oluşturan IPv6 aralıklarını belirtin. Bunlar, kurumsal ağ sınırınızı tanımlamak için belirttiğiniz Kurumsal Ağ Etki Alanı Adları ile birlikte kullanılır.
Girişler virgülle ayrılarak birden çok aralık belirtilebilir.
Şirketinizde yapılandırılmış bir proxy varsa, Kurumsal Bulut Kaynakları ayarlarında belirtilen bulut kaynaklarına giden trafiğin hangi proxy üzerinden yönlendirileceğini belirtebilirsiniz.
Girişler noktalı virgülle ayrılarak birden fazla değer belirtilebilir.
Kurumsal ağınızı oluşturan DNS adlarını belirtin. Bunlar, kurumsal ağ sınırınızı tanımlamak için belirttiğiniz IP aralıklarıyla birlikte kullanılır. Girişler virgülle ayrılarak birden çok değer belirtilebilir.
Bu ayar, Windows Bilgi Koruması'nı etkinleştirmek için gereklidir.
Örneğin: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Şirket ağınızı oluşturan DNS adlarını belirtin. Bunlar, şirket ağı sınırlarınızı tanımlamak üzere belirttiğiniz IP aralıklarıyla birlikte kullanılır. Tek tek girişleri bir '|' ile ayırarak birden fazla değer belirtebilirsiniz.
Windows Bilgi Koruması'nı etkinleştirmek için bu ayar gereklidir.
Örneğin: sirket.contoso.com|bolge.contoso.com
",
+ "enterpriseProxyServers": "
Kurumsal ağınızda dışarı yönelik proxy'ler varsa, bunları burada belirtin. Proxy sunucusu adresi belirtirken, trafik akışı için izin verilecek ve Windows Bilgi Koruması ile korunacak bağlantı noktasını da belirtmeniz gerekir.
Not: Bu liste, Kurumsal İç Proxy Sunucu listenizdeki sunucuları içermemelidir. Girişler noktalı virgülle ayrılarak birden çok değer belirtilebilir.
",
+ "maxInactivityTime1": "Cihazın PIN'inin veya parolasının kilitlenmesine neden olan izin verilen en uzun boşta kalma süresini (dakika cinsinden) belirtir. Kullanıcılar Ayarlar uygulamasında belirtilen en uzun süreden daha kısa herhangi bir mevcut zaman aşımı değerini seçebilir. Bu ilke ile ayarlanana değer ne olursa olsun, Lumia 950 ve 950XL'nin en fazla 5 dakika zaman aşımı değeri olduğuna dikkat edin.",
+ "maxInactivityTime2": "0 (varsayılan) - Bir zaman aşımı değeri tanımlanmaz. '0' varsayılan değeri 'Zaman aşımı tanımlanmadı' olarak yorumlanır.",
+ "maxPasswordAttempts1": "Bu ilkenin, mobil cihazda ve masaüstünde farklı davranışları vardır.",
+ "maxPasswordAttempts2": "Mobil cihazda, kullanıcı bu ilke ile ayarlanan değere ulaştığında cihaz silinir.",
+ "maxPasswordAttempts3": "Masaüstünde, kullanıcı bu ilke ile ayarlanan değere ulaştığında bilgisayar silinmez. Onun yerine, masaüstü BitLocker kurtarma moduna geçirilerek veriler erişilemez ancak kurtarılabilir yapılır. BitLocker etkileştirilmemişse ilke zorlanamaz.",
+ "maxPasswordAttempts4": "Başarısız deneme sınırına ulaşmadan önce, kullanıcı kilit ekranına gönderilir ve daha fazla başarısız denemenin bilgisayarı kilitleyeceği konusunda uyarılır. Kullanıcı sınıra ulaştığında cihaz otomatik olarak yeniden başlatılır ve BitLocker kurtarma sayfasını gösterir. Bu sayfa, kullanıcıya BitLocker kurtarma anahtarını sorar.",
+ "maxPasswordAttempts5": "0 (varsayılan) - Hatalı PIN veya parola girildikten sonra cihaz asla silinmez.",
+ "maxPasswordAttempts6": "Tüm ilke değerleri = 0 ise en güvenli değer 0'dır; aksi takdirde, En düşük ilke değeri en güvenli değerdir.",
+ "mdmDiscoveryUrl": "MDM'ye kaydolan kullanıcıların kullanacağı MDM kayıt uç noktasının URL'sini belirtin. Varsayılan ayar olarak, bu Intune için belirtilmiştir.",
+ "minimumPinLength1": "PIN için gerekli en az sayıda karakteri ayarlayan tamsayı değeri. Varsayılan değer 4'tür. Bu ilke ayarı için yapılandırabileceğiniz en küçük sayı 4'tür. Yapılandırabileceğiniz en büyük sayı, Maksimum PIN uzunluğu ilke ayarında yapılandırılan sayıdan veya 127 sayısından hangisi küçükse ondan küçük olmalıdır.",
+ "minimumPinLength2": "Bu ilke ayarını yapılandırırsanız PIN uzunluğu bu sayıdan büyük veya bu sayıya eşit olmalıdır. Bu ilke ayarını devre dışı bırakır veya yapılandırmazsanız PIN uzunluğu 4'e eşit veya daha büyük olmalıdır.",
+ "name": "Bu ağ sınırının adı",
+ "neutralResources": "
Şirketinizde kimlik doğrulama için yeniden yönlendirme uç noktaları varsa, bunları burada belirtin. Burada belirtilen konumlar, bağlantının yeniden yönlendirmeden önceki bağlamına bağlı olarak, kişisel ya da kurumsal olarak değerlendirilir.
Girişler virgülle ayrılarak birden çok değer belirtilebilir.
Örneğin: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Windows'ta oturum açma yöntemi olarak İş İçin Windows Hello'yu ayarlayan değer",
+ "passportForWork2": "Varsayılan değer true'dur. Bu ilkeyi false olarak ayarlarsanız kullanıcı, sağlamanın gerekli olduğu Microsoft Entra'ya katılan cep telefonları dışında İş İçin Windows Hello'yu hiçbir yerde sağlayamaz.",
+ "pinExpiration": "Bu ilke ayarı için yapılandırabileceğiniz en büyük sayı 730'dur. Bu ilke ayarı için yapılandırabileceğiniz en küçük sayı 0'dır. Bu ilke 0 olarak ayarlanırsa kullanıcının PIN'inin süresi asla sona ermez.",
+ "pinHistory1": "Bu ilke ayarı için yapılandırabileceğiniz en büyük sayı 50'dir. Bu ilke ayarı için yapılandırabileceğiniz en küçük sayı 0'dır. Bu ilke 0 olarak ayarlanırsa önceki PIN'lerin depolanması gerekmez.",
+ "pinHistory2": "Kullanıcının geçerli PIN'i kullanıcı hesabıyla ilişkilendirilmiş PIN'ler kümesine eklenir. PIN geçmişi PIN sıfırlama yoluyla korunmaz.",
+ "protectUnderLock": "Cihaz kilitli durumdayken uygulama içeriği korunur.",
+ "protectionModeBlock": "
Kapalı: Kullanıcı verileri korunan uygulamaların dışında yeniden konumlandırmakta özgürdür. Hiçbir eylem kaydedilmez.
",
+ "protectionModeOverride": "
Geçersiz kılmalara izin ver: Kullanıcı verileri korunan uygulamadan korunmayan uygulamaya yeniden konumlandırmayı denediğinde bu durum sorulur. Bu istemi geçersiz kılmayı seçerse eylem kaydedilir.
",
+ "protectionModeSilent": "
Sessiz: Kullanıcı verileri korunan uygulamaların dışında yeniden konumlandırmakta özgürdür. Bu eylemler kaydedilir.
",
+ "required": "Gerekli",
+ "revokeOnMdmHandoff": "Windows 10, sürüm 1703'te eklenmiştir. Bu ilke, bir cihaz MAM'den MDM'ye yükseltildiğinde WIP anahtarlarının iptal edilip edilmeyeceğini denetler. \\\"Kapalı\\\" olarak ayarlanırsa, anahtarlar iptal edilmez ve kullanıcı yükseltmeden sonra korumalı dosyalara erişmeye devam eder. MDM hizmeti MAM hizmeti ile aynı WIP EnterpriseID kullanılarak yapılandırıldıysa bu önerilir.",
+ "revokeOnUnenroll": "Bir cihazın bu ilkeden kaydı kaldırıldığında şifreleme anahtarlarının iptal edilmesine neden olur.",
+ "rmsTemplateForEdp": "RMS şifrelemesi için kullanılacak TemplateID GUID'si. Azure RMS şablonu, BT yöneticisinin RMS korumalı dosyaya kimlerin ne kadar süreyle erişebileceği ile ilgili ayrıntıları yapılandırmasını sağlar.",
+ "showWipIcon": "Üzerine bir simge koyarak kurumsal bağlamda işlem yapan kullanıcının bunu bilmesini sağlar.",
+ "useRmsForWip": "WIP için Azure RMS şifrelemesine izin verilip verilmeyeceğini belirtir."
+ },
+ "requireAppPin": "
Kayıtlı bir cihazda cihaz kilidi algılandığında uygulama PIN'ini devre dışı bırakmak için Evet'i seçin.
Not: Intune, iOS/iPadOS'ta üçüncü taraf EMM çözümü ile yapılan cihaz kaydını algılayamaz.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Özel betik oluştur",
+ "edit": "Özel betiği düzenle"
+ },
+ "basicInfo": "Yazdığınız algılama ve düzeltme betiklerinden yeni bir özel betik paketi oluşturun.",
+ "customScriptCapitalized": "Özel betik",
+ "customScriptLowercase": "özel betik",
+ "detectionScript": "Algılama betiği"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Varsayılan",
+ "header": "Güncelleştirme Önceliği",
+ "postponed": "Ertelendi",
+ "priority": "Yüksek Öncelik"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Otomatik güncelleştirme",
+ "sublabel": "Eski uygulamalar kullanıcı tarafından Şirket Portalı’ndan yüklendiyse, yeni uygulamanın yüklenmesini gerektir."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Arka Plan",
+ "displayText": "{0} içinde içerik indirme",
+ "foreground": "Önalan",
+ "header": "Teslim iyileştirme önceliği"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Kullanıcının yeniden başlatma bildirimini ertelemesine izni ver",
+ "countdownDialog": "Yeniden başlatma gerçekleşmeden önce yeniden başlatma geri sayımı iletişim kutusunun ne zaman görüntüleneceği seçin (dakika)",
+ "durationInMinutes": "Cihaz yeniden başlatma mehil süresi (dakika)",
+ "snoozeDurationInMinutes": "Erteleme süresini seçin (dakika)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Saat dilimi",
+ "local": "Cihaz saat dilimi",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Tarih ve saat",
+ "deadlineTimeColumnLabel": "Yükleme son tarihi",
+ "deadlineTimeDatePickerErrorMessage": "Seçili tarih geçerli tarihten sonra olmalıdır",
+ "deadlineTimeLabel": "Uygulama yükleme son tarihi",
+ "defaultTime": "Hemen",
+ "infoText": "Bu uygulama, aşağıda bir kullanılabilirlik süresi belirtilmezse dağıtıldığı anda kullanılabilir. Bu gerekli bir uygulamaysa, yükleme son tarihini belirtebilirsiniz.",
+ "specificTime": "Belirli bir tarih ve saat",
+ "startTimeColumnLabel": "Kullanılabilirlik",
+ "startTimeDatePickerErrorMessage": "Seçilen tarih, son tarihten önce olmalıdır",
+ "startTimeLabel": "Uygulama kullanılabilirliği"
+ },
+ "restartGracePeriodHeader": "Yeniden başlatma mehil süresi",
+ "restartGracePeriodLabel": "Cihaz yeniden başlatma mehil süresi",
+ "summaryTitle": "Son kullanıcı deneyimi"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Özel özniteliği en az bir gruba atayın. Atamaları düzenlemek için Özellikler'e gidin.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Kabuk betiği",
"successfullySavedPolicy": "{0} kaydedildi"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64 bit",
+ "thirtyTwoBit": "32 bit"
+ },
+ "Countries": {
+ "ae": "Birleşik Arap Emirlikleri",
+ "ag": "Antigua ve Barbuda",
+ "ai": "Anguilla",
+ "al": "Arnavutluk",
+ "am": "Ermenistan",
+ "ao": "Angola",
+ "ar": "Arjantin",
+ "at": "Avusturya",
+ "au": "Avustralya",
+ "az": "Azerbaycan",
+ "bb": "Barbados",
+ "be": "Belçika",
+ "bf": "Burkina Faso",
+ "bg": "Bulgaristan",
+ "bh": "Bahreyn",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolivya",
+ "br": "Brezilya",
+ "bs": "Bahamalar",
+ "bt": "Bhutan",
+ "bw": "Botsvana",
+ "by": "Belarus",
+ "bz": "Belize",
+ "ca": "Kanada",
+ "cg": "Kongo Cumhuriyeti",
+ "ch": "İsviçre",
+ "cl": "Şili",
+ "cn": "Çin",
+ "co": "Kolombiya",
+ "cr": "Kosta Rika",
+ "cv": "Cabo Verde",
+ "cy": "Kıbrıs",
+ "cz": "Çek Cumhuriyeti",
+ "de": "Almanya",
+ "dk": "Danimarka",
+ "dm": "Dominika",
+ "do": "Dominik Cumhuriyeti",
+ "dz": "Cezayir",
+ "ec": "Ekvador",
+ "ee": "Estonya",
+ "eg": "Mısır",
+ "es": "İspanya",
+ "fi": "Finlandiya",
+ "fj": "Fiji",
+ "fm": "Mikronezya Federe Devletleri",
+ "fr": "Fransa",
+ "gb": "Birleşik Krallık",
+ "gd": "Grenada",
+ "gh": "Gana",
+ "gm": "Gambiya",
+ "gr": "Yunanistan",
+ "gt": "Guatemala",
+ "gw": "Gine-Bissau",
+ "gy": "Guyana",
+ "hk": "Hong Kong",
+ "hn": "Honduras",
+ "hr": "Hırvatistan",
+ "hu": "Macaristan",
+ "id": "Endonezya",
+ "ie": "İrlanda",
+ "il": "İsrail",
+ "in": "Hindistan",
+ "is": "İzlanda",
+ "it": "İtalya",
+ "jm": "Jamaika",
+ "jo": "Ürdün",
+ "jp": "Japonya",
+ "ke": "Kenya",
+ "kg": "Kırgızistan",
+ "kh": "Kamboçya",
+ "kn": "St. Kitts ve Nevis",
+ "kr": "Kore Cumhuriyeti",
+ "kw": "Kuveyt",
+ "ky": "Cayman Adaları",
+ "kz": "Kazakistan",
+ "la": "Laos Demokratik Halk Cumhuriyeti",
+ "lb": "Lübnan",
+ "lc": "St. Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberya",
+ "lt": "Litvanya",
+ "lu": "Lüksemburg",
+ "lv": "Letonya",
+ "md": "Moldova Cumhuriyeti",
+ "mg": "Madagaskar",
+ "mk": "Kuzey Makedonya",
+ "ml": "Mali",
+ "mn": "Moğolistan",
+ "mo": "Makao",
+ "mr": "Moritanya",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malavi",
+ "mx": "Meksika",
+ "my": "Malezya",
+ "mz": "Mozambik",
+ "na": "Namibia",
+ "ne": "Nijer",
+ "ng": "Nijerya",
+ "ni": "Nikaragua",
+ "nl": "Hollanda",
+ "no": "Norveç",
+ "np": "Nepal",
+ "nz": "Yeni Zelanda",
+ "om": "Umman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua Yeni Gine",
+ "ph": "Filipinler",
+ "pk": "Pakistan",
+ "pl": "Polonya",
+ "pt": "Portekiz",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Katar",
+ "ro": "Romanya",
+ "ru": "Rusya",
+ "sa": "Suudi Arabistan",
+ "sb": "Solomon Adaları",
+ "sc": "Seyşeller",
+ "se": "İsveç",
+ "sg": "Singapur",
+ "si": "Slovenya",
+ "sk": "Slovakya",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Surinam",
+ "st": "Sao Tome ve Principe",
+ "sv": "El Salvador",
+ "sz": "Svaziland",
+ "tc": "Turks ve Caicos",
+ "td": "Çad",
+ "th": "Tayland",
+ "tj": "Tacikistan",
+ "tm": "Türkmenistan",
+ "tn": "Tunus",
+ "tr": "Türkiye",
+ "tt": "Trinidad ve Tobago",
+ "tw": "Tayvan",
+ "tz": "Tanzanya",
+ "ua": "Ukrayna",
+ "ug": "Uganda",
+ "us": "Amerika Birleşik Devletleri",
+ "uy": "Uruguay",
+ "uz": "Özbekistan",
+ "vc": "St. Vincent ve Grenadinler",
+ "ve": "Venezuela",
+ "vg": "İngiliz Virgin Adaları",
+ "vn": "Vietnam",
+ "ye": "Yemen",
+ "za": "Güney Afrika",
+ "zw": "Zimbabve"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "Bu ayar, ayarlar kataloğunda mevcut olduğundan OMA-URI aracılığıyla yapılandırılamaz. Bu ayarı yapılandırmak için lütfen ayarlar kataloğuna gidin."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Yapılandırma profili dosyası seçin"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "Bu ayarlar, cihaz kaydı aracılığıyla kullanıcı onayı ile kaydedilen (veya kullanıcı onaysız) ve otomatik cihaz kaydı (eski adıyla DEP) ile kaydedilen cihazlar için çalışır.",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Cihaz kaydı ve otomatik cihaz kaydı",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Cihaz kaydı ve otomatik cihaz kaydı",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Tam olarak yönetilen cihazlarınızda Microsoft Launcher'ı yapılandırın.",
+ "deviceExperienceTypeDescription": "Yapılandırmak istediğiniz deneyime bağlı olarak, cihazlarınızdaki deneyimi yapılandırmaya başlamak için Kiosk Modu'nu veya Microsoft Launcher’ı seçin. Bir cihaz deneyimi türü seçmezseniz kullanıcılar cihazın varsayılan giriş ekranı deneyimini görür.",
+ "deviceExperienceTypeKioskMode": "Kiosk modu (ayrılmış ve tam olarak yönetilen)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Kuruluşunuzun yönetilen cihazlarınızdaki giriş ekranı deneyimini özelleştirmek için Microsoft Launcher'ı kullanın. Launcher'ı varsayılan başlatıcı olarak belirlerseniz cihaz kullanıcıları başka bir başlatıcı kullanamaz.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Microsoft Launcher'ı varsayılan başlatıcı yap",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft Launcher (yalnızca tam olarak yönetilen)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "İzin vermediğiniz sürece kullanıcılar duvar kağıdını değiştiremez. Bu ayar, yalnızca özel bir duvar kağıdı yapılandırdığınızda kullanılabilir.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Kullanıcının duvar kağıdını değiştirmesine izin ver",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Kendi görüntünüzü giriş ekranı duvar kağıdı olarak uygulamanızı ve kullanıcının bunu değiştirip değiştiremeyeceğini seçmenizi sağlar. Özel bir duvar kağıdı yapılandırmazsanız cihaz, geçerli duvar kağıdını saklar.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Özel duvar kağıdını yapılandır",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Bu görüntü, cihaz giriş ekranında duvar kağıdı olarak görünecek. Bu alan, yalnızca özel bir duvar kağıdı yapılandırdığınızda kullanılabilir.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Duvar kağıdı görüntüsünün URL'sini girin",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Devre dışı",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Gizle",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Göster",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "Kullanıcının panel varlık durumunu değiştirmesine izin verirseniz ilk dağıtım için önceki ayar zorlanır. Sonraki dağıtımlarda, kullanıcının yaptığı değişikliklere göre ayar zorlanmaz. Bu ayar, yalnızca panelin varlık durumunu yapılandırdığınızda kullanılabilir.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Kullanıcının panel varlık durumunu değiştirmesine izin ver",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Panel, cihaz kullanıcılarının uygulamalarına ve araçlarına hızlı şekilde erişmesini sağlayan bir menüdür. Gizli olduğunda kullanıcıların bu menüye erişmek için ekranı yukarı kaydırmaları gerekir.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Yuva varlık durumu",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "Kullanıcının akışı etkinleştirmesine/devre dışı bırakmasına izin verirseniz ilk dağıtım için önceki ayar zorlanır. Sonraki dağıtımlarda, kullanıcının yaptığı değişikliklere göre ayar zorlanmaz. Bu ayar, yalnızca başlatıcı akışını etkinleştirdiğinizde kullanılabilir.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Kullanıcının akışı etkinleştirmesine/devre dışı bırakmasına izin ver",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Akış, giriş ekranının sağında bulunan ve cihaz kullanıcılarının takvimlerine, belgelerine ve son etkinliklerine erişebildiği ek bir ekrandır. Bu ekranı etkinleştirmezseniz devre dışı kalır. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Başlatıcı akışını etkinleştir",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Arama çubuğu yerleşimi",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Alt",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Gizle",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Üst",
+ "deviceExperienceTypeName": "Cihaz deneyimi türü",
"deviceGuardCredentialGuardDescription": "UEFI kilidiyle etkinleştirme Credential Guard'ın uzaktan devre dışı bırakılamamasını sağlar. UEFI kilidi olmadan etkinleştirme Credential Guard'ın Grup İlkesi aracılığıyla uzaktan devre dışı bırakılmasına olanak sağlar.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune Cihaz Kimliği",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Etkin saatler dışında zamanlanan Otomatik Yeniden Başlatma'dan Kullanıcı Denetimli Yeniden Başlatma'ya geçmeden önceki gün sayısı, kullanıcının zamanlamasını gerektirir.",
"engagedRestartTransitionScheduleName": "Kullanıcıları otomatik yeniden başlatmadan sonra kullanıcı denetimli yeniden başlatmaya geçir (gün)",
"enhancedOption": "Gelişmiş (1903 ve öncesi)",
- "enrollmentProfileTypeDedicatedDevice": "Ayrılmış cihaz",
- "enrollmentProfileTypeDescription": "Microsoft Launcher'ı veya Microsoft Managed Home Screen'i cihazlarınızda yapılandırmaya başlamak için bir kayıt profili türü seçin. Profil türü seçmezseniz kullanıcılar, cihazın varsayılan giriş ekranı deneyimini görürler.",
- "enrollmentProfileTypeFullyManaged": "Tam olarak yönetilen",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Tam olarak yönetilen cihazlarınızda Microsoft Launcher'ı yapılandırın.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Kuruluşunuzun yönetilen cihazlarınızdaki giriş ekranı deneyimini özelleştirmek için Microsoft Launcher'ı kullanın. Launcher'ı varsayılan başlatıcı olarak belirlerseniz cihaz kullanıcıları başka bir başlatıcı kullanamaz.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Microsoft Launcher'ı varsayılan başlatıcı yap",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Kullanıcının duvar kağıdını değiştirmesine izin ver",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Kendi görüntünüzü giriş ekranı duvar kağıdı olarak uygulamanızı ve kullanıcının bunu değiştirip değiştiremeyeceğini seçmenizi sağlar. Özel bir duvar kağıdı yapılandırmazsanız cihaz, geçerli duvar kağıdını saklar.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Özel duvar kağıdını yapılandır",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "Bu görüntü, cihaz giriş ekranında duvar kağıdı olarak görünecek. Bu alan, yalnızca özel bir duvar kağıdı yapılandırdığınızda kullanılabilir.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Duvar kağıdı görüntüsünün URL'sini girin",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Devre dışı",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Gizle",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Göster",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "Panel, cihaz kullanıcılarının uygulamalarına ve araçlarına hızlı şekilde erişmesini sağlayan bir menüdür. Gizli olduğunda kullanıcıların bu menüye erişmek için ekranı yukarı kaydırmaları gerekir.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Panel varlık durumu",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Kullanıcının akışı etkinleştirmesine/devre dışı bırakmasına izin ver",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "Akış, giriş ekranının sağında bulunan ve cihaz kullanıcılarının takvimlerine, belgelerine ve son etkinliklerine erişebildiği ek bir ekrandır. Bu ekranı etkinleştirmezseniz devre dışı kalır. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Başlatıcı akışını etkinleştir",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Arama çubuğu yerleşimi",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Alt",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Gizle",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Üst",
- "enrollmentProfileTypeName": "Kayıt profili türü",
"enrollmentSettingsHeading": "Kayıt Ayarları",
"enterOnlyOneForDns": "DNS sunucularının bir listesini ve/veya bir proxy sunucusunu girin.",
"enterpriseModeLoggingExample": "ör. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Tam olarak yönetilen ve şirkete ait iş profili cihazları",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "Bu ayarlar, yalnızca tam olarak yönetilen ve ayrılmış cihazlar için geçerlidir.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Tam olarak yönetilen ve ayrılmış cihazlar",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "Bu ayarlar yalnızca bir kiosk ilkesiyle çalışan tam olarak yönetilen ve ayrılmış cihazlar için geçerlidir.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Tam olarak yönetilen ve ayrılmış cihazlar (yalnızca kiosk modu)",
"gameCenterBlockedMacDescription": "Evet, Game Center'ı devre dışı bırakır ve Game Center simgesi Giriş ekranından kaldırılır. MacOS 10.13 veya sonraki sürümleri çalıştıran cihazlar için mevcuttur.",
"gameCenterBlockedMacName": "Game Center'ı engelle",
"gamingPageDescription": "Ayarlar uygulamasında Oyunlar'a erişimi engelleyin.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Bu kiosk cihazındaki uygulamalara erişmek için oturum açma türünü yapılandırır.",
"kioskShowTaskbarDesc": "Kiosk Windows görev çubuğunu gösterin veya gizleyin.",
"kioskShowTaskbarName": "Windows Görev Çubuğu",
+ "kioskSingleInfoBoxText": "Tek uygulama kiosk modu – Seçili uygulamayı çalıştırmak için cihazı kilitler. Bu modu kullanmak için önce seçilen uygulamayı istemci uygulamaları iş yükünden onaylamanız ve atamanız gerekir. Tam olarak yönetilen cihazlarda, uygulanacak tek seçili uygulama Managed Home Screen’dir. Diğer tüm uygulamalar bunun yerine gerekli bir uygulama olarak kabul edilir.",
"kioskStartDateTime": "Bakım Penceresi Başlangıç Saati",
"kioskStartMenuLayoutXmlDesc": "Uygulamaların Başlangıç menüsünde hangi sırayla görüntüleneceğini tanımlayan bir XML düzeni sağlayın",
"kioskStartMenuLayoutXmlDescV2": "Başlangıç düzenini yapılandıran bir XML dosyasını içeri aktarmak, geçerli görüntüleme sırasını ve kutucuk boyutu seçimlerini geçersiz kılar. Daha fazla bilgi edinin",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Geçerli bir dosya yolu olmalıdır",
"mustBeAValidHttpsUrl": "Geçerli bir https URL'si olmalıdır",
"mustBeAValidIPAddress": "Geçerli bir IP adresi olmalıdır (örn. 192.168.0.1 veya 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Değer, isteğe bağlı bağlantı noktası numarasıyla birlikte geçerli bir IP adresi veya FQDN olmalıdır.",
"mustBeAValidIPv4Address": "Geçerli bir IPv4 adresi (örn. 192.168.0.1) olmalıdır",
"mustBeAValidIPv6Address": "Geçerli bir IPv6 adresi olmalıdır (örn. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "www.contoso.com/image.jpg gibi geçerli bir resim URL'si olmalıdır",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Yerel depodaki Windows Güvenlik Duvarı kuralları (Genel ağlar)",
"publicNetworkName": "Ortak (bulunamayan) ağ",
"publicOutboundConnectionsSummaryLabel": "Giden bağlantılar için varsayılan eylem (Genel ağlar)",
- "publicPlayStoreEnabledDescription": "Kullanıcılar, İstemci Uygulamaları'nda kaldırılmasını gerekli kıldığınız uygulamalar hariç tüm uygulamalara erişir. Bu ayar için \"Yapılandırılmadı\" değerini seçerseniz, kullanıcılar yalnızca İstemci Uygulamaları'nda kullanılabilir veya gerekli olarak listelediğiniz uygulamalara erişebilir.",
+ "publicPlayStoreEnabledDescription": "\"İzin Ver\"i seçerseniz kullanıcılar, İstemci Uygulamalarında kaldırılmasını istediğiniz uygulamalar dışındaki tüm uygulamalara erişebilir. Bu ayar için \"Engelle\" veya \"Yapılandırılmadı\"yı seçerseniz kullanıcılar yalnızca İstemci Uygulamalarında kullanılabilir veya gerekli olarak listelediğiniz uygulamalara erişebilir.",
"publicPlayStoreEnabledName": "Google Play Store'daki tüm uygulamalara izin ver",
- "publicPlayStoreEnabledWarning": "\"İzin Ver\"i seçerseniz, kullanıcılar Google Play Store'dan herhangi bir uygulama yükleyebilir. Daha sonra seçiminizi \"Yapılandırılmadı\" olarak değiştirirseniz, kullanıcı için açıkça izin verilmeyen tüm uygulamalar cihazdan kaldırılır.",
+ "publicPlayStoreEnabledWarning": "\"İzin Ver\"i seçerseniz kullanıcılar Google Play Store'dan herhangi bir uygulamayı yükleyebilir. Daha sonra seçiminizi \"Engelle\" veya \"Yapılandırılmadı\" olarak değiştirirseniz, İstemci Uygulamalarında kullanılabilir veya gerekli olarak listelediğiniz uygulamalar dışındaki tüm uygulamalar cihazdan kaldırılacaktır.",
+ "publicPlayStoreSelectionAllowList": "Engelle",
+ "publicPlayStoreSelectionBlockList": "İzin ver",
+ "publicPlayStoreSelectionNotConfigured": "Yapılandırılmadı",
"publicShieldedSummaryLabel": "Korumalı (Genel ağlar)",
"publicStealthModeSummaryLabel": "Gizli mod (Genel ağlar)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Çok noktaya yayınlara yönelik tek noktaya yayın yanıtları (Genel ağlar)",
@@ -7864,7 +10839,7 @@
"pendingDeleteContentStateText": "Siliniyor...",
"photoLibrary": "Fotoğraf Kitaplığı",
"pinCharSettingTooltip": "Sayısal bir PIN yalnızca sayısal karakterlere izin verir.\r\n\r\nGeçiş kodu şunların hepsini gerektirir: Alfasayısal karakterler ve izin verilen simgeler.",
- "pinRotationWarning": "Important: On June 1, 2024 Apps with an SDK older than 17.7.0 will no longer get App Protection Policy updates and users will be blocked from launching the app. Please ensure users are updating their apps and your line of business apps are using a recent SDK or wrapper. Learn More",
+ "pinRotationWarning": "Önemli: 1 Haziran 2024’te 17.7.0 sürümünden eski bir SDK içeren Uygulamalar artık Uygulama Koruma İlkesi güncelleştirmeleri almayacak ve kullanıcıların uygulamayı başlatması engellenecek. Lütfen kullanıcıların uygulamalarını güncelleştirdiğinden ve iş kolu uygulamalarınızın son SDK veya sarmalayıcı sürümünü kullandığından emin olun. Daha Fazla Bilgi Edinin",
"pinToDashboard": "Dummy string, don't translate",
"platformColumnLabel": "Platform",
"platformDropDownLabel": "Platform",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Cihaz",
"licenseTypeUser": "Kullanıcı"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Özellik",
- "rule": "Kural",
- "ruleDetails": "Kural Ayrıntıları",
- "value": "Değer"
- },
- "assignIf": "Şu geçerliyse profili ata:",
- "deleteWarning": "Bu işlem seçili Uygulanabilirlik Kuralını silecek",
- "dontAssignIf": "Şu geçerliyse profili atama:",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "ve diğer {0} etki alanı denetleyicisi",
- "instructions": "Bu profilin atanmış bir grup içinde nasıl uygulanacağını belirtin. Intune, profili yalnızca bu kuralların birleşik ölçütlerine uyan cihazlara uygular.",
- "maxText": "En Büyük",
- "minText": "En Küçük",
- "noActionRow": "Uygulanabilirlik Kuralı Belirtilmedi",
- "oSVersion": "ör. 1.2.3.4",
- "toText": "buraya",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "İşletim sistemi sürümü",
- "windows10OsVersion": "İşletim sistemi sürümü",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Eşittir",
- "greaterThan": "Büyüktür",
- "greaterThanOrEqualTo": "Büyük veya eşittir",
- "lessThan": "Küçüktür",
- "lessThanOrEqualTo": "Küçük veya eşittir",
- "notEqualTo": "Eşit değildir"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Betik imza denetimini uygula ve betiği sessiz çalıştır",
- "enforceSignatureCheckTooltip": "Betiğin güvenilen bir yayıncı tarafından imzalandığını doğrulamak için 'Evet' seçeneğini belirleyin, bunu yapmak betiğin uyarı ya da komut istemi görüntülenmeden çalıştırılmasına olanak tanır. Betik engellenmeden çalışır. Betiği imza doğrulaması olmadan son kullanıcı onayıyla çalıştırmak için 'Hayır' (varsayılan) seçeneğini belirleyin.",
- "header": "Özel algılama betiği kullan",
- "runAs32Bit": "Betiği 64 bitlik istemcilerde 32 bitlik işlem olarak çalıştır",
- "runAs32BitTooltip": "Betiği 64 bit istemcilerde 32 bit işlem olarak çalıştırmak için 'Evet' seçeneğini belirleyin. Betiği 64 bit istemcilerde 64 bit işlem olarak çalıştırmak için 'Hayır' (varsayılan) seçeneğini belirleyin. 32 bit istemciler, betiği 32 bit işlemde çalıştırır.",
- "scriptContent": "Betik içeriği",
- "scriptFile": "Betik dosyası",
- "scriptFileNotSelectedValidation": "Bir betik dosyası seçilmedi.",
- "scriptFileTooltip": "Uygulamanın istemci üzerindeki varlığını algılayacak bir PowerShell betiğini seçin. Betik, 0 değerli bir çıkış kodu döndürdüğünde veya STDOUT'a bir dize değeri yazdığında uygulama algılanır.",
- "scriptSizeLimitValidation": "Algılama betiğiniz izin verilen maksimum boyutu aşıyor. Bunu algılama betiğinizin boyutunu küçülterek çözün."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Oluşturulma tarihi",
- "dateModified": "Değiştirilme tarihi",
- "doesNotExist": "Dosya veya klasör yok",
- "fileOrFolderExists": "Dosya veya klasör var",
- "sizeInMB": "Boyut (MB)",
- "version": "Dize (sürüm)"
- },
- "associatedWith32Bit": "64 bit istemciler üzerinde bir 32 bit uygulamayla ilişkilendirildi",
- "associatedWith32BitTooltip": "64 bit istemcilerde 32 bit bağlamındaki herhangi bir yol ortam değişkenini genişletmek için 'Evet' seçeneğini belirleyin. 64 bit istemcilerde 64 bit bağlamındaki herhangi bir yol değişkenini genişletmek için 'Hayır' (varsayılan) seçeneğini belirleyin. 32 bit istemciler her zaman 32 bit bağlamını kullanır.",
- "detectionMethod": "Algılama yöntemi",
- "detectionMethodTooltip": "Uygulamanın varlığını doğrulamak için kullanılan algılama yönteminin türünü seçin.",
- "fileOrFolder": "Dosya veya klasör",
- "fileOrFolderToolTip": "Algılanacak dosya veya klasör.",
- "operator": "İşleç",
- "operatorTooltip": "Karşılaştırmayı doğrulamak için kullanılan algılama yönteminin işlecini seçin.",
- "path": "Yol",
- "pathTooltip": "Algılanacak dosya veya klasörü içeren klasörün tam yolu.",
- "value": "Değer",
- "valueTooltip": "Seçili algılama yöntemiyle eşleşen bir değer seçin. Tarih algılama yöntemleri yerel biçimde girilmelidir."
- },
- "GridColumns": {
- "pathOrCode": "Yol/Kod",
- "type": "Tür"
- },
- "MsiRule": {
- "operator": "İşleç",
- "operatorTooltip": "MSI ürün sürümünü doğrulama karşılaştırması için işleci seçin.",
- "productCode": "MSI ürün kodu",
- "productCodeTooltip": "Uygulama için geçerli bir MSI ürün kodu.",
- "productVersion": "Değer",
- "productVersionCheck": "MSI ürün sürümü denetimi",
- "productVersionCheckTooltip": "MSI ürün kodunun yanı sıra MSI ürün sürümünü de doğrulamak için 'Evet' seçeneğini belirleyin.",
- "productVersionTooltip": "Uygulamanın MSI ürün sürümünü girin."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Tamsayı karşılaştırması",
- "keyDoesNotExist": "Anahtar yok",
- "keyExists": "Anahtar var",
- "stringComparison": "Dize karşılaştırması",
- "valueDoesNotExist": "Değer yok",
- "valueExists": "Değeri var",
- "versionComparison": "Sürüm karşılaştırması"
- },
- "associatedWith32Bit": "64 bit istemciler üzerinde bir 32 bit uygulamayla ilişkilendirildi",
- "associatedWith32BitTooltip": "64 bit istemcilerde 32 bit kayıt defterini aramak için 'Evet' seçeneğini belirleyin. 64 bit istemcilerde 64 bit kayıt defterini aramak için 'Hayır' (varsayılan) seçeneğini belirleyin. 32 bit istemciler, her zaman 32 bit kayıt defterini arar.",
- "detectionMethod": "Algılama yöntemi",
- "detectionMethodTooltip": "Uygulamanın varlığını doğrulamak için kullanılan algılama yönteminin türünü seçin.",
- "keyPath": "Anahtar yolu",
- "keyPathTooltip": "Algılanacak değeri içeren kayıt defteri girişinin tam yolu.",
- "operator": "İşleç",
- "operatorTooltip": "Karşılaştırmayı doğrulamak için kullanılan algılama yönteminin işlecini seçin.",
- "value": "Değer",
- "valueName": "Değer adı",
- "valueNameTooltip": "Algılanacak kayıt defteri değerinin adı.",
- "valueTooltip": "Seçili algılama yöntemi ile eşleşen bir değer seçin."
- },
- "RuleTypeOptions": {
- "file": "Dosya",
- "mSI": "MSI",
- "registry": "Kayıt Defteri"
- },
- "gridAriaLabel": "Algılama Kuralları",
- "header": "Uygulamanın var olduğunu gösteren bir kural oluşturun.",
- "noRulesSelectedPlaceholder": "Hiçbir kural belirtilmedi.",
- "ruleTableLimit": "25'e kadar algılama kuralı ekleyebilirsiniz",
- "ruleType": "Kural türü",
- "ruleTypeTooltip": "Eklenecek algılama kuralı türünü seçin."
- },
- "RuleConfigurationOptions": {
- "customScript": "Özel algılama betiği kullan",
- "manual": "Algılama kurallarını el ile yapılandırın"
- },
- "bladeTitle": "Algılama kuralları",
- "header": "Uygulamanın varlığını algılamak için kullanılacak uygulamaya özel kuralları yapılandırın.",
- "rulesFormat": "Kuralların biçimi",
- "rulesFormatTooltip": "Algılama kurallarını el ile yapılandırmayı veya uygulamanın var olduğunu algılamak için özel bir betik kullanmayı seçin.",
- "selectorLabel": "Algılama kuralları"
+ "BooleanActions": {
+ "allow": "Şirket Portalı",
+ "block": "Engelle",
+ "configured": "Yapılandırılan",
+ "disable": "Devre dışı bırak",
+ "dontRequire": "Gerekli Kılma",
+ "enable": "Etkinleştir",
+ "hide": "Gizle",
+ "limit": "Sınır",
+ "notConfigured": "Yapılandırılmadı",
+ "require": "Gerekli Kıl",
+ "show": "Göster",
+ "yes": "Evet"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge uygulaması tarafından önerilen SmartScreen ayarları: Bulut yapılandırması şablonunda Windows 10. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Uç nokta algılama ve yanıt"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "Uygulama ve tarayıcı yalıtımı",
- "aSRApplicationControl": "Uygulama denetimi",
- "aSRAttackSurfaceReduction": "Saldırı yüzeyi azaltma kuralları",
- "aSRDeviceControl": "Cihaz denetimi",
- "aSRExploitProtection": "Exploit Protection",
- "aSRWebProtection": "Web koruması (Microsoft Edge'in eski sürümü)",
- "aVExclusions": "Microsoft Defender Virüsten Koruma dışlamaları",
- "antivirus": "Microsoft Defender Virüsten Koruma",
- "cloudPC": "Windows 365 Güvenlik Temeli",
- "default": "Uç Nokta Güvenliği",
- "defenderTest": "Uç Nokta için Microsoft Defender tanıtımı",
- "diskEncryption": "BitLocker",
- "eDR": "Uç nokta algılama ve yanıt",
- "edgeSecurityBaseline": "Microsoft Edge temeli",
- "edgeSecurityBaselinePreview": "Önizleme: Microsoft Edge taban çizgisi",
- "editionUpgradeConfiguration": "Sürüm yükseltme ve mod değiştirme",
- "firewall": "Windows Güvenlik Duvarı",
- "firewallRules": "Windows Güvenlik Duvarı kuralları",
- "identityProtection": "Hesap koruması",
- "identityProtectionPreview": "Hesap koruması (önizleme)",
- "mDMSecurityBaseline1810": "Ekim 2018 için Windows 10 ve üzeri için MDM Güvenlik Temeli",
- "mDMSecurityBaseline1810Preview": "Önizleme: Ekim 2018 için Windows 10 ve üzeri için MDM Güvenlik Temeli",
- "mDMSecurityBaseline1810PreviewBeta": "Önizleme: Ekim 2018 için Windows 10 ve üzeri için MDM Güvenlik Temeli (beta)",
- "mDMSecurityBaseline1906": "Mayıs 2019 için Windows 10 ve üzeri için MDM Güvenlik Temeli",
- "mDMSecurityBaseline2004": "Ağustos 2020 için Windows 10 ve üzeri için MDM Güvenlik Temeli",
- "mDMSecurityBaseline2101": "Aralık 2020 Windows 10 ve üstü için MDM Güvenlik Temel Hattı",
- "macOSAntivirus": "Virüsten koruma",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS güvenlik duvarı",
- "microsoftDefenderBaseline": "Uç Nokta için Microsoft Defender temeli",
- "office365Baseline": "Microsoft Office O365 temeli",
- "office365BaselinePreview": "Önizleme: Microsoft Office O365 temeli",
- "securityBaselines": "Güvenlik Temelleri",
- "test": "Test Şablonu",
- "testFirewallRulesSecurityTemplateName": "Windows Güvenlik Duvarı kuralları (Test)",
- "testIdentityProtectionSecurityTemplateName": "Hesap koruması (Test)",
- "windowsSecurityExperience": "Windows Güvenliği deneyimi"
- },
- "Firewall": {
- "mDE": "Windows Güvenlik Duvarı"
- },
- "FirewallRules": {
- "mDE": "Windows Güvenlik Duvarı Kuralları"
- },
- "OneDriveKnownFolderMove": {
- "description": "OneDrive Bilinen Klasör Taşıma ayarları: Bulut yapılandırma şablonunda Windows 10. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Hesap Koruması",
- "administrativeTemplates": "Yönetim Şablonları",
- "androidCompliancePolicy": "Android uyumluluk ilkesi",
- "aospDeviceOwnerCompliancePolicy": "Android (AOSP) uyumluluk ilkesi",
- "applicationControl": "İş için Uygulama Denetimi",
- "attackSurfaceReductionRules": "Saldırı Yüzeyi Azaltma Kuralları",
- "bitlocker": "BitLocker",
- "custom": "Özel",
- "deliveryOptimization": "Teslim İyileştirme",
- "derivedPersonalIdentityVerificationCredential": "Türetilmiş kimlik bilgisi",
- "deviceControl": "Cihaz Denetimi",
- "deviceFeatures": "Cihaz özellikleri",
- "deviceFirmwareConfigurationInterface": "Cihaz Üretici Yazılımı Yapılandırma Arabirimi",
- "deviceLock": "Cihaz Kilidi",
- "deviceOwner": "Tam olarak yönetilen, ayrılmış ve şirkete ait iş profili",
- "deviceRestrictions": "Cihaz kısıtlamaları",
- "deviceRestrictionsWindows10Team": "Cihaz kısıtlamaları (Windows 10 Ekibi)",
- "domainJoinPreview": "Etki Alanına Katılma",
- "editionUpgradeAndModeSwitch": "Sürüm yükseltme ve mod değiştirme",
- "education": "Eğitim",
- "email": "E-posta",
- "emailSamsungKnoxOnly": "E-posta (Yalnızca Samsung KNOX)",
- "endpointProtection": "Uç nokta koruması",
- "expeditedCheckin": "Mobil cihaz yönetimi yapılandırması",
- "exploitProtection": "Exploit Protection",
- "extensions": "Uzantılar",
- "hardwareConfigurations": "BIOS Yapılandırmaları ve diğer ayarlar profili",
- "identityProtection": "Kimlik koruması",
- "iosCompliancePolicy": "iOS uyumluluk ilkesi",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Yerel kullanıcı grubu üyeliği",
- "macCompliancePolicy": "Mac uyumluluk ilkesi",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Kurumsal Güvenlik Temeli için Microsoft 365 Uygulamaları",
- "microsoftDefenderAntivirus": "Microsoft Defender Virüsten Koruma",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender Virüsten Koruma dışlamaları",
- "microsoftDefenderAtpWindows10Desktop": "Uç Nokta için Microsoft Defender (Windows 10 veya sonraki sürümleri çalıştıran masaüstü cihazları)",
- "microsoftDefenderFirewallRules": "Windows Güvenlik Duvarı Kuralları",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Microsoft Edge için Güvenlik Temeli",
- "mxProfileZebraOnly": "MX profili (yalnızca Zebra)",
- "networkBoundary": "Ağ sınırı",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Grup İlkesini Geçersiz Kılma",
- "pkcsCertificate": "PKCS sertifikası",
- "pkcsImportedCertificate": "PKCS içe aktarılan sertifikası",
- "preferenceFile": "Tercih dosyası",
- "presets": "Önayarlar",
- "scepCertificate": "SCEP sertifikası",
- "secureAssessmentEducation": "Güvenli değerlendirme (Eğitim)",
- "securityBaselineForHololens2Advanced": "HoloLens 2 için Gelişmiş Güvenlik Temeli",
- "securityBaselineForHololens2Standard": "HoloLens 2 için Standart Güvenlik Temeli",
- "securityBaselineForMicrosoftEdge": "Microsoft Edge için Güvenlik Temeli",
- "settingsCatalog": "Ayarlar Kataloğu",
- "sharedMultiUserDevice": "Paylaşılan çok kullanıcılı cihaz",
- "softwareUpdates": "Yazılım Güncelleştirmeleri",
- "trustedCertificate": "Güvenilen sertifika",
- "unknown": "Bilinmeyen",
- "unsupported": "Desteklenmiyor",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi içeri aktarma",
- "windows10CompliancePolicy": "Windows 10/11 uyumluluk ilkesi",
- "windows10MobileCompliancePolicy": "Windows 10 Mobile uyumluluk ilkesi",
- "windows10XScep": "SCEP sertifikası - TEST",
- "windows10XTrustedCertificate": "Güvenilen sertifika - TEST",
- "windows10XVPN": "VPN - TEST",
- "windows10XWifi": "WIFI - TEST",
- "windows11SecurityBaseline": "Windows 10 ve sonrası için Güvenlik Temelleri",
- "windows365SecurityBaseline": "Windows 365 Güvenlik Temeli",
- "windows8CompliancePolicy": "Windows 8 uyumluluk ilkesi",
- "windowsHealthMonitoring": "Windows işlevsel durum izleme",
- "windowsInformationProtection": "Windows Bilgi Koruması",
- "windowsPhoneCompliancePolicy": "Windows Phone uyumluluk ilkesi",
- "windowsUpdateforBusiness": "İş İçin Windows Update",
- "wiredNetwork": "Kablolu ağ",
- "workProfile": "Kişisel olarak sahip olunan iş profili"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Güncelleştirmeyi kademeli olarak kullanıma sun",
- "immediateStart": "Güncelleştirmeyi en kısa sürede kullanıma sun",
- "startDateOnly": "Güncelleştirmeyi belirli bir tarihte kullanıma sun"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Yönetilen cihazlar",
- "devicesWithoutEnrollment": "Yönetilen uygulamalar"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filtre",
- "assignmentFilterTypeColumnHeader": "Filtre modu",
- "assignmentToast": "Son kullanıcı bildirimleri",
- "assignmentTypeTableHeader": "ATAMA TÜRÜ",
- "autoUpdate": "Otomatik güncelleştirme",
- "deadlineTimeColumnLabel": "Yükleme son tarihi",
- "deliveryOptimizationPriorityHeader": "Teslim iyileştirme önceliği",
- "groupTableHeader": "Grup",
- "installContextLabel": "Bağlam Yükleme",
- "isRemovable": "Çıkarılabilir olarak yükle",
- "licenseTypeLabel": "Lisans türü",
- "modeTableHeader": "Grup modu",
- "policySet": "İlke Kümesi",
- "preventAutoAppUpdate": "Otomatik uygulama güncelleştirmelerini engelle",
- "preventManagedAppBackup": "iCloud uygulamasını yedeklemeyi engelle",
- "restartGracePeriodHeader": "Yeniden başlatma mehil süresi",
- "startTimeColumnLabel": "Kullanılabilirlik",
- "tracks": "İzlemeler",
- "uninstallOnRemoval": "Cihaz kaldırılırken yüklemeyi kaldır",
- "updateMode": "Güncelleştirme Önceliği",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD web uygulaması",
- "androidEnterpriseSystemApp": "Android Enterprise sistem uygulaması",
- "androidForWorkApp": "Yönetilen Google Play Store uygulaması",
- "androidLobApp": "Android iş kolu uygulaması",
- "androidStoreApp": "Android mağaza uygulaması",
- "builtInAndroid": "Yerleşik Android uygulaması",
- "builtInApp": "Yerleşik uygulama",
- "builtInIos": "Yerleşik iOS uygulaması",
- "iosIPadOSWebClip": "iOS/iPadOS web klibi",
- "iosLobApp": "iOS iş kolu uygulaması",
- "iosStoreApp": "iOS mağaza uygulaması",
- "iosVppApp": "iOS Volume Purchase Program uygulaması",
- "lineOfBusinessApp": "İş kolu uygulaması",
- "macOSDmgApp": "macOS uygulaması (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS iş kolu uygulaması",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office Suite",
- "macOSPkgApp": "macOS uygulaması (PKG)",
- "macOSWebClip": "macOS web klibi",
- "macOsVppApp": "macOS Volume Purchase Program uygulaması",
- "managedAndroidLobApp": "Yönetilen Android iş kolu uygulaması",
- "managedAndroidStoreApp": "Yönetilen Android mağaza uygulaması",
- "managedGooglePlayApp": "Yönetilen Google Play Store uygulaması",
- "managedGooglePlayPrivateApp": "Yönetilen Google Play özel uygulaması",
- "managedGooglePlayWebApp": "Yönetilen Google Play web bağlantısı",
- "managedIosLobApp": "Yönetilen iOS iş kolu uygulaması",
- "managedIosStoreApp": "Yönetilen iOS mağaza uygulaması",
- "microsoftStoreForBusinessApp": "İş İçin Microsoft Store uygulaması",
- "microsoftStoreForBusinessReleaseManagedApp": "İş İçin Microsoft Store",
- "officeAddIn": "Office eklentisi",
- "officeSuiteApp": "Microsoft 365 Uygulamaları (Windows 10 ve üzeri)",
- "sharePointApp": "SharePoint uygulaması",
- "teamsApp": "Teams uygulaması",
- "webApp": "Web bağlantısı",
- "win32CatalogApp": "Windows katalog uygulaması (Win32)",
- "winGetPublicApp": "Windows Paket Yöneticisi Topluluk Deposu",
- "winGetStoreApp": "Microsoft Store uygulaması (yeni)",
- "windowsAppXLobApp": "Windows AppX iş kolu uygulaması",
- "windowsClassicApp": "Windows uygulaması (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 ve üzeri)",
- "windowsMobileMsiLobApp": "Windows MSI iş kolu uygulaması",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX iş kolu uygulaması",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX iş kolu uygulaması",
- "windowsPhone81StoreApp": "Windows Phone 8.1 mağaza uygulaması",
- "windowsPhoneXapLobApp": "Windows Phone XAP iş kolu uygulaması",
- "windowsStoreApp": "Microsoft Store uygulaması (eski)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX iş kolu uygulaması",
- "windowsUniversalLobApp": "Windows Evrensel iş kolu uygulaması",
- "windowsWebApp": "Windows web bağlantısı"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Hariç Tutulan",
- "include": "Dahil edilen",
- "includeAllDevicesVirtualGroup": "Dahil edilen",
- "includeAllUsersVirtualGroup": "Dahil edilen"
- },
- "AssignmentToast": {
- "hideAll": "Tüm bildirimleri gizle",
- "showAll": "Tüm bildirimleri göster",
- "showReboot": "Bilgisayar yeniden başlatma işlemleri için bildirim göster"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Evet",
- "notConfigured": "Hayır"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Arka Plan",
- "displayText": "{0} içinde içerik indirme",
- "foreground": "Ön plan",
- "header": "Teslim iyileştirme önceliği"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "Uygulama yüklemesi, cihazın yeniden başlatılmasını zorlayabilir",
- "basedOnReturnCode": "Dönüş kodlarına dayalı davranışı belirle",
- "force": "Intune zorunlu bir cihaz yeniden başlatma işlemi gerçekleştirecek",
- "suppress": "Belirli bir eylem yok"
- },
- "FilterType": {
- "exclude": "Dışla",
- "include": "Ekle",
- "none": "Yok"
- },
- "InstallIntent": {
- "available": "Kayıtlı cihazlar için bulunur",
- "availableWithoutEnrollment": "Kayıtlı veya kayıtsız olarak kullanılabilir",
- "notApplicable": "Geçerli değil",
- "required": "Gerekli",
- "uninstall": "Kaldır"
- },
- "SettingType": {
- "assignmentType": "Atama türü",
- "deviceLicensing": "Lisans türü",
- "installContext": "Cihaz kaldırılırken yüklemeyi kaldır",
- "toastSettings": "Son kullanıcı bildirimleri",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Varsayılan",
- "postponed": "Ertelendi",
- "priority": "Yüksek Öncelik"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Cihazları ilk sağlama için yapılandırın.",
- "title": "Cihaz hazırlama"
- },
- "EnrollmentSettings": {
- "description": "Kaydı engelleme ve kullanıcılara atama gibi kayıt ayarlarını yapılandırın.",
- "title": "Kayıt ayarları"
- },
- "OSConfiguration": {
- "menuDescription": "Kullanıcıların Windows'u önyüklenebilir bir flash sürücüden kurtarmak için kullanabileceği ayarları yapılandırın.",
- "menuTitle": "Windows işletim sistemi kurtarma yapılandırması"
- },
- "coManagementAuthorityDesc": "Configuration Manager tümleştirmesi için ortak yönetim ayarlarını yapılandırın",
- "coManagementAuthorityTitle": "Ortak yönetim ayarları ",
- "deploymentProfiles": "Windows Autopilot dağıtım profilleri",
- "description": "Bir Windows 10/11 bilgisayarının kullanıcılar veya yöneticiler tarafından Intune'a kaydedilmesinin yedi farklı yolu hakkında bilgi edinin.",
- "descriptionLabel": "Windows kayıt yöntemleri",
- "enrollmentStatusPage": "Kayıt Durumu Sayfası"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Tüm önerilen sürücü güncelleştirmelerini otomatik olarak onayla",
- "manual": "Sürücü güncelleştirmelerini kendiniz onaylayıp dağıtın"
- },
- "BulkActions": {
- "button": "Toplu eylemler"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Onay yöntemi:"
- },
- "DeploymentDeferralInDays": {
- "label": "Güncelleştirmeleri şu kadar süre sonra kullanıma sun:",
- "units": "(gün)",
- "value": "{0} gün"
- },
- "DriverAction": {
- "header": "Aşağıdan bir eylem seçin.",
- "label": "Sürücü eylemi",
- "placeholder": "Eylem seçin"
- },
- "IncludedDrivers": {
- "label": "Dahil edilen sürücüler"
- },
- "SelectDrivers": {
- "header": "Toplu işleminize dahil edilecek sürücüleri seçin"
- },
- "SelectDriversToInclude": {
- "button": "Dahil edilecek sürücüleri seçin"
- },
- "SelectLessDrivers": {
- "validation": "En fazla yüz sürücü seçilebilir"
- },
- "SelectMoreDrivers": {
- "validation": "En az bir sürücü seçilmelidir"
- },
- "SelectedDrivers": {
- "label": "Seçili sürücüler"
- },
- "availabilityDate": "Windows Update'te kullanılabilir yap",
- "bladeTitle": "Sürücü güncelleştirmeleri Windows 10 ve sonrası (önizleme)",
- "lastSync": "Son eşitleme:",
- "lastSyncDefaultText": "İlk envanter koleksiyonu beklemede",
- "loadError": "Yüklenemedi!"
- },
- "DriverStatus": {
- "approved": "Onaylandı",
- "declined": "Reddedildi",
- "export": "Önerilen sürücüler dışarı aktarılıyor",
- "needsReview": "Gözden geçirme gerekiyor",
- "paused": "Duraklatıldı"
- },
- "DriversToReview": {
- "text": "Gözden geçirilecek {0}"
- },
- "Subtitle": {
- "automatic": "Otomatik onay sürücüsü güncelleştirme ilkesi",
- "manual": "El ile onay sürücüsü güncelleştirme ilkesi"
- },
- "SyncNotification": {
- "failure": "{0} eşitlenemiyor",
- "failureDescription": "Bir hatayla karşılaştık ve istenen eşitlemeyi tamamlayamadık. Lütfen yeniden deneyin.",
- "pending": "{0} eşitleme devam ediyor",
- "pendingDescription": "En son veriler alınıyor. Bu işlem birkaç dakika sürebilir.",
- "success": "{0} eşitleme tamamlandı",
- "successDescription": "WUfB hizmetiyle eşitleme {0} saatinde tamamlandı"
- },
- "SyncSpinner": {
- "text": "Eşitleme devam ediyor. Bu işlem birkaç dakika sürebilir. Bir uyarı görmezseniz birkaç dakika sonra tekrar kontrol edin."
- },
- "TabName": {
- "basics": "Temel bilgiler",
- "driverUpdateSettings": "Ayarlar",
- "otherDrivers": "Diğer sürücüler",
- "properties": "Özellikler",
- "recommendedDrivers": "Önerilen sürücüler"
- },
- "driverAddFilter": "Filtre ekle",
- "driverApplicableDevices": "Geçerli cihazlar",
- "driverApprovalStatus": "Durum",
- "driverBulkActions": "Toplu eylemler",
- "driverClass": "Sürücü sınıfı",
- "driverCount": "{0} - {1} / {2} arası kayıtlar gösteriliyor",
- "driverFilterNoneSelected": "Hiçbiri seçilmedi",
- "driverManufacturer": "Üretici",
- "driverName": "Sürücü adı",
- "driverNameLower": "windows sürücü güncelleştirmesi dağıtımı",
- "driverNameUpper": "Windows sürücü güncelleştirmesi dağıtımı",
- "driverRefresh": "Yenile",
- "driverReleaseDate": "Sürüm tarihi",
- "driverSearch": "Ara",
- "driverSearchKeyword": "Arama anahtar sözcüğünü girin",
- "driverVersion": "Sürüm",
- "firstDeploymentDate": "İlk Dağıtım",
- "infoBoxText": "Bir ilke atandıktan ve oluşturulduktan sonra envanterin doldurulması 24 saate kadar sürebilir.",
- "textBlockText": "İlke onayınızı ve dağıtım ayarlarınızı seçin. Güncelleştirmeleri otomatik olarak veya kendiniz onaylayıp dağıtmak için bir ilke ayarlamayı seçin. Onay yöntemi bir ilke oluşturulduktan sonra değiştirilemez, ancak sürücü onaylarına ve dağıtım ayrıntılarına tek tek yapılan değişiklikler, atanan cihazlar için bir envanter oluşturulduğunda mümkün olacaktır."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Şirketinizde kullanım için onaylanmamış uygulamalar yükleyen kullanıcılar hakkında bilgi sahibi olmak için bu ayarları kullanın. Kısıtlı uygulama listesi türünü seçin:
\r\n Yasaklı uygulamalar - Kullanıcılar tarafından yüklendiğinde bilgilendirilmek istediğiniz uygulamaların listesi. \r\n Onaylı uygulamalar - Şirketinizde kullanım için onaylanmış uygulamaların listesi. Kullanıcılar bu listede olmayan bir uygulama yüklediğinde bilgilendirilirsiniz. \r\n ",
- "androidZebraMxZebraMx": "XML biçiminde bir MX profilini karşıya yükleyerek Zebra cihazları yapılandırın.",
- "iosDeviceFeaturesAirprint": "iOS cihazlarını ağınızdaki AirPrint uyumlu yazıcılara otomatik olarak bağlanacak şekilde yapılandırmak için bu ayarları kullanın. Yazıcılarınızın IP adresine ve kaynak yoluna ihtiyacınız vardır.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "iOS 13.0 ve sonraki sürümleri çalıştıran cihazlar için çoklu oturum açma (SSO) sağlayan bir uygulama uzantısı yapılandırın.",
- "iosDeviceFeaturesHomeScreenLayout": "iOS cihazlarında dock ve Giriş Ekranları için ekran düzenini yapılandırın. Bazı cihazlarda, görüntülenebilecek öğe sayısı sınırlandırılmış olabilir.",
- "iosDeviceFeaturesIOSWallpaper": "iOS cihazlarının Giriş Ekranında ve/veya kilit ekranında gösterilecek görüntüyü seçin.\r\n Her iki konumda da benzersiz bir görüntü göstermek için kilit ekranı görüntüsüyle ve Giriş Ekranı görüntüsüyle iki ayrı profil oluşturun.\r\n Daha sonra her iki profili de kullanıcılarınıza atayın.\r\n \r\n
\r\n
Maksimum dosya boyutu: 750 KB
\r\n
Dosya türü: PNG, JPG veya JPEG
\r\n
\r\n ",
- "iosDeviceFeaturesNotifications": "Uygulamalar için bildirim ayarlarını belirtin. iOS 9.3 ve sonraki sürümleri destekler.",
- "iosDeviceFeaturesSharedDevice": "Kilit ekranında görüntülenecek isteğe bağlı bir metin belirtin. Bu, iOS 9.3 ve sonrası sürümlerde desteklenir. Daha Fazla Bilgi Edinin",
- "iosGeneralApplicationRestrictions": "Şirketinizde kullanım için onaylanmamış uygulamalar yükleyen kullanıcılar hakkında bilgi sahibi olmak için bu ayarları kullanın. Kısıtlı uygulama listesi türünü seçin:
\r\n Yasaklı uygulamalar - Kullanıcılar tarafından yüklendiğinde bilgilendirilmek istediğiniz uygulamaların listesi. \r\n Onaylı uygulamalar - Şirketinizde kullanım için onaylanmış uygulamaların listesi. Kullanıcılar bu listede olmayan bir uygulama yüklediğinde bilgilendirilirsiniz. \r\n ",
- "iosGeneralApplicationVisibility": "Kullanıcının görüntüleyebileceği veya başlatabileceği iOS uygulamalarını belirtmek için, gösterilen uygulamalar listesini kullanın. Kullanıcının görüntüleyemeyeceği veya başlatamayacağı iOS uygulamalarını belirtmek için, gizli uygulamalar listesini kullanın.",
- "iosGeneralAutonomousSingleAppMode": "Bu listeye eklediğiniz ve bir cihaza atadığınız uygulamalar, başlatıldıktan sonra yalnızca kendisini çalıştırmak için cihazı kilitleyebilir veya belirli bir eylem çalışırken (örneğin bir test yapılırken) cihazı kilitleyebilir. Eylem tamamlandıktan veya siz kısıtlamayı kaldırdıktan sonra cihaz normal durumuna geri döner.",
- "iosGeneralKiosk": "Kiosk modu, çeşitli ayarları cihaza kilitler veya cihazda çalıştırılabilecek tek bir uygulamayı belirtir. Bu özellik, cihazın yalnızca tek bir demo uygulamasını çalıştırmasını istediğiniz perakende mağaza gibi ortamlarda yararlı olabilir.",
- "macDeviceFeaturesAirprint": "macOS cihazları, ağınızdaki AirPrint uyumlu yazıcılara otomatik olarak bağlanmak üzere yapılandırmak için bu ayarları kullanın. Yazıcılarınızın IP adresleri ve kaynak yoluna ihtiyacınız olacaktır.",
- "macDeviceFeaturesAssociatedDomains": "Kuruluşunuzun uygulamaları ile web siteleri arasında veri ve oturum açma kimlik bilgilerini paylaşmak için ilişkili etki alanlarını yapılandırın. Bu profil, macOS 10.15 veya sonraki sürümleri çalıştıran cihazlara uygulanabilir.",
- "macDeviceFeaturesExtensibleSingleSignOn": "macOS 10.15 veya sonraki sürümleri çalıştıran cihazlar için çoklu oturum açma (SSO) sağlayan bir uygulama uzantısı yapılandırın.",
- "macDeviceFeaturesLoginItems": "Kullanıcılar cihazlarında oturum açtığında hangi uygulamaların, dosyaların ve klasörlerin açılacağını seçin. Kullanıcıların seçilen uygulamaların açılma şeklini değiştirmesini istemiyorsanız, uygulamaları kullanıcı yapılandırmasından gizleyebilirsiniz.",
- "macDeviceFeaturesLoginWindow": "macOS oturum açma ekranının görünümünü ve kullanıcılara oturum açmadan önce ve açtıktan sonra sunulan işlevleri yapılandırın.",
- "macExtensionsKernelExtensions": "10.13.2 veya üzeri bir sürüm çalıştıran macOS cihazlarda çekirdek uzantı ilkesini yapılandırmak için bu ayarları kullanın.",
- "macGeneralDomains": "Son kullanıcı tarafından gönderilen veya alınan ve burada belirttiğiniz etki alanlarıyla eşleşmeyen e-postalar, güvenilmeyen olarak işaretlenir.",
- "windows10EndpointProtectionApplicationGuard": "Microsoft Edge kullanırken Microsoft Defender Application Guard, ortamınızı kuruluşunuz tarafından güvenilir olarak tanımlanmayan sitelerden korur. Kullanıcılar, yalıtılmış ağ sınırınızda listelenmeyen siteleri ziyaret ettiğinde, siteler Hyper-V'de sanal bir göz atma oturumunda açılır. Güvenilir siteler, Cihaz Yapılandırmasında yapılandırılabilen bir ağ sınırı ile tanımlanır. Bu özelliğin yalnızca 64 bit Windows 10 veya sonraki bir sürümünü çalıştıran cihazlarda kullanılabildiğini unutmayın.",
- "windows10EndpointProtectionCredentialGuard": "Credential Guard'ı etkinleştirmek şu gerekli ayarları etkinleştirir:\r\n \r\n
\r\n
Sanallaştırma Tabanlı Güvenliği Etkinleştir: Bir sonraki yeniden başlatmada sanallaştırma tabanlı güvenliği (VBS) açar. Sanallaştırma tabanlı güvenlik, güvenlik hizmetlerine destek sağlamak için Windows Hiper Yöneticisi'ni kullanır.
\r\n \r\n
Doğrudan Bellek Erişimi ile Güvenli Önyükleme: VBS'yi Güvenli Önyükleme ve doğrudan bellek erişimi (DMA) ile açar.
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "Microsoft Defender Uygulama Denetimi tarafından denetlenmesi gereken veya çalışması için güvenilebilecek ek uygulamaları seçin. Windows bileşenlerine ve Windows mağazasından alınan tüm uygulamalara çalışmaları için otomatik olarak güvenilir.
\r\n Uygulamalar \"Yalnızca denetim\" modunda çalışırken engellenmez. \"Yalnızca denetim\" modu tüm olayları yerel günlüklere kaydeder.\r\n ",
- "windows10GeneralPrivacyPerApp": "\"Varsayılan gizlilik\"te tanımladığınızdan farklı bir gizlilik davranışı olması gereken uygulamaları ekleyin.",
- "windows10NetworkBoundaryNetworkBoundary": "Ağ sınırı, bulut tarafından barındırılan etki alanı ve kuruluş ağı üzerindeki bilgisayarlar için IP adres aralıkları gibi kurumsal kaynakların listesidir. Bu konumlarda bulunan verileri korumaya yönelik ilkeler uygulamak için ağ sınırlarını tanımlayın.",
- "windowsHealthMonitoring": "Windows işlevsel durum izleme ilkesini yapılandırın.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone, kullanıcıların yasaklı uygulama listesinde belirtilen veya onaylı uygulamalar listesinde belirtilmeyen uygulamaları yüklemesini veya başlatmasını engelleyebilir. Tüm yönetilen uygulamalar onaylı listeye eklenmelidir."
- },
- "Inputs": {
- "accountDomain": "Hesap etki alanı",
- "accountDomainHint": "örneğin contosodomain",
- "accountDomainInfoBalloon": "Kullanıcının hesap etki alanını belirtin.",
- "accountTypeInfoBalloon": "Kimlik doğrulaması modeline dayanarak yapılandırılan hesap türünü belirtin",
- "allowContactSetting": "Kullanıcının kişi ayarını değiştirmesine izin ver",
- "allowContactSyncInfoBalloon": "Kullanıcının kişi eşitleme ayarını değiştirmesine izin verilip verilmediğini belirtin",
- "allowUserChange": "Kullanıcının ayar değiştirmesine izin ver",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Lütfen com.microsoft.word gibi bir paket adı girin",
- "androidUrlValidation": "Şuna benzer geçerli bir URL girin: https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=tr",
- "appInstallContext": "Uygulama yükleme bağlamı",
- "appUrlLabel": "App Store URL'si",
- "appleUrlValidation": "Şuna benzer geçerli bir URL girin: https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "İlgili cihaz türü",
- "assignmentActionLabel": "Mod",
- "authenticationMethodInfoBalloon": "Kullanıcı için kimlik doğrulaması yöntemini belirtin",
- "authenticationMetod": "Kimlik doğrulama yöntemi",
- "authenticationType": "Kimlik doğrulaması türü",
- "authenticationTypeInfoBalloon": "Kullanıcı için kimlik doğrulaması türünü belirtin",
- "availableLicenseCount": "Kullanılabilir lisanslar",
- "basicAuth": "Temel kimlik doğrulama",
- "biometricsInfoBalloon": "Kullanıcıların cihazlarında uygulamaya erişmeleri için TouchID veya FaceID gibi biyometrik bilgiler gerekebilir. Bu bilgiler gerekli kılındığında, bu profilde seçilen kimlik doğrulaması yöntemine ek olarak kullanılır. Uygulama koruma ilkesi yönetilen verilere erişim öncesinde erişim gereksinimleri içerdiğinden bu ayar, Intune Uygulama Koruma İlkeleri dağıtıldığında etkinleştirilmemelidir. Her ikisinin de etkinleştirilmesi, Outlook mobile erişim için birden fazla erişim isteğiyle sonuçlanır. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır. ",
- "bookNameLabel": "Kitap adı",
- "bundleDescriptionHint": "Dahil edilen uygulamalar için bir açıklama girin.",
- "calendar": "Takvim",
- "categoryLabel": "Kategori",
- "categoryNameLabel": "Varsayılan ad",
- "certProfileType": "Sertifika profili türü",
- "certificate": "Sertifika",
- "certificates": "Sertifikalar",
- "commandLineLabel": "Komut satırı bağımsız değişkenleri",
- "commandLineSizeHint": "Komut satırı bağımsız değişken metni uzunluğunun üst sınırı 1024 karakterdir",
- "configurationSettingsFormatLabel": "Yapılandırma ayarları biçimi",
- "configurationSettingsLabel": "Ayarlar biçimi",
- "contactSync": "Kişileri Kaydet",
- "contactSyncInfoBalloon": "Mobil cihazın yerel adres defterine kişi kaydetmek, yeni aramaların ve kısa mesajların kullanıcının mevcut Outlook kişilerine bağlanmasını sağlar. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır.",
- "contacts": "İlgili Kişiler",
- "createdDateTime": "Oluşturuldu",
- "defaultCategoryHint": "Varsayılan kategoriler değiştirilemez",
- "deploySMimeCertsFromIntune": "Intune'dan S/MIME sertifikaları dağıt",
- "descriptionGenericLabel": "Açıklama",
- "descriptionHint": "Açıklama girin...",
- "descriptionLabel": "Açıklama",
- "descriptionSizeHint": "Açıklamanın uzunluğu 10.000 karakterden uzun olmamalıdır",
- "developerLabel": "Geliştirici",
- "developerSizeHint": "Geliştirici adının uzunluk üst sınırı 256 karakterdir.",
- "disable": "Devre Dışı Bırak",
- "disabled": "Devre dışı",
- "displayNameLabel": "Ad",
- "displayVersionHint": "Uygulama sürümünü girin",
- "displayVersionLabel": "Uygulama Sürümü",
- "displayVersionLengthCheck": "Görüntü sürümünün uzunluğu en fazla 130 karakter olmalıdır",
- "eBookCategoryNameLabel": "Varsayılan ad",
- "emailAccount": "E-posta hesabı adı",
- "emailAccountHint": "örn. Kurumsal E-posta",
- "emailAccountInfoBalloon": "E-posta hesabının kullanıcılara cihazlarında görüntülenecek olan görünen adını belirtin",
- "emailAddressAttribute": "Microsoft Entra kimliğinden kullanıcı e-posta adresi özniteliği",
- "emailAddressInfoBalloon": "Posta göndermek ve almak için kullanılacak olan e-posta adresini belirtin",
- "emailServer": "E-posta Sunucusu",
- "emailServerHint": "örneğin mail.contoso.com",
- "emailServerInfoBalloon": "Exchange Server sunucunuzun konak adını belirtin",
- "enable": "Etkinleştir",
- "enableSMime": "S/MIME'yi etkinleştir",
- "enabled": "Etkin",
- "encryptAllEmails": "Tüm e-postaları şifrele",
- "encryptionCertificates": "Şifreleme sertifikaları",
- "endUserNotifications": "Son kullanıcı bildirimleri",
- "enrollmentTypeLabel": "Cihaz kayıt türü",
- "externalRecipients": "Dış alıcılar Posta İpucu",
- "externalRecipientsInfoBalloon": "Dış Alıcılar Posta İpucu, gönderenin bir dış alıcı veya dış alıcı içeren bir dağıtım grubu eklemesi durumunda görüntülenir. Bu Posta İpucu, gönderenleri oluşturdukları iletinin kuruluş dışına çıkıp çıkmayacağı konusunda bilgilendirerek sözcük seçimi, üslup ve içerik konusunda doğru kararlar alınmasına yardımcı olur. Yalnızca hibrit modern kimlik doğrulamasından yararlanan Exchange Online hesapları ve şirket hesapları için kullanılabilir. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık'tır.",
- "focusedInbox": "Odaklanmış Gelen Kutusu",
- "focusedInboxInfoBalloon": "Odaklanmış Gelen Kutusu, gelen kutunuzu iki sekmeye ayırır: Odaklanmış ve Diğer. En önemli e-postalarınız Odaklanmış sekmesindeyken diğerleri kolayca ulaşılabilir ancak gözden uzak bir yerde, Diğer sekmesinde durur. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır. ",
- "fullScreenEnabledLabel": "Tam ekran",
- "gmailNineAmountOfEmail": "Eşitlenecek e-posta miktarı",
- "gmailNineAuthenticationMethodInfoBalloon": "Kullanıcıların e-posta sunucusunda nasıl kimlik doğrulaması yapmasını istediğinizi seçin. Son kullanıcılar için en güvenli ve sorunsuz deneyimi sağlamak üzere sertifikaları kullanın. Cihaz sahibi cihazlarına yönelik SCEP ve PKCS sertifika profilleri bulunmadığından sertifika tabanlı kimlik doğrulaması henüz kullanılamıyor. ",
- "gmailNineCertificateUPNInfoBalloon": "Sertifika, kullanıcı asıl adını (UPN) bir konu diğer adı olarak içermelidir.",
- "gmailNineEmailAddressInfoBalloon": "Intune’nın, profil tarafından kullanılacak e-posta adresini dinamik olarak oluşturmak için Microsoft Entra Kimliğinden aldığı öznitelik. Örneğin, MyName@contoso.com (UPN). E-posta profilleri için Microsoft Entra öznitelikleri hakkında daha fazla bilgi edinin.",
- "gmailNineEmailServerInfoBalloon": "Belirttiğiniz uygulamanın e-posta almak için bağlandığı e-posta sunucusunun Exchange konumu (URL).",
- "gmailNineEmailSynchronizeInfoBalloon": "İstemcinin kaç e-postayı eşitleyeceğini denetleyin.",
- "gmailNineSSLInfoBalloon": "E-posta sunucusu ile yapılan tüm iletişimin güvenliğini sağlamaya yardımcı olmak için SSL'yi etkinleştirin.",
- "gmailNineUsernameInfoBalloon": "Intune’nın, profil tarafından kullanılacak kullanıcı adını dinamik olarak oluşturmak için Microsoft Entra Kimliğinden aldığı öznitelik. Örneğin, MyName@contoso.com (UPN) veya MyName (kullanıcı adı). E-posta profilleri için Microsoft Entra öznitelikleri hakkında daha fazla bilgi edinin.",
- "ignoreManifestScope": "Bildirim kapsamını yoksay",
- "ignoreVersionDetection": "Uygulama sürümünü yoksay",
- "informationUrlLabel": "Bilgi URL'si",
- "informationUrlSizeHint": "Bilgi URL’sinin en yüksek uzunluğu 1024 karakterdir",
- "installAsManaged": "Yönetilen olarak yükle",
- "installationSourceLabel": "Uygulama türü",
- "installerTypeInfoBalloon": "Uygulama paketinin yükleyici türü.",
- "installerTypeLabel": "Yükleyici Türü",
- "isFeatured": "Bunu Şirket Portalı'nda öne çıkan uygulama olarak görüntüle",
- "isMAMEnabledToggleLabel": "Evet",
- "lastModifiedDateTime": "Son güncelleştirme Zamanı",
- "ldapUrl": "LDAP URL'si",
- "licensingType": "Cihaz bağlamı atamasını destekler",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimum işletim sistemi",
- "modernAuth": "Modern kimlik doğrulaması",
- "nameHint": "Bir ad girin",
- "nameLabel": "Ad",
- "nameSizeHint": "Ad uzunluğunun üst sınırı 512 karakterdir.",
- "notConfigured": "Yapılandırılmadı",
- "notesLabel": "Notlar",
- "notesSizeHint": "Not metni uzunluğunun üst sınırı 1024 karakterdir.",
- "notificationType": "Bildirim türü",
- "oneDay": "Bir Gün",
- "oneMonth": "Bir Ay",
- "oneWeek": "Bir Hafta",
- "outlookSMimeSettings": "Outlook S/MIME ayarları",
- "ownerLabel": "Sahip",
- "ownerSizeHint": "Sahip adı uzunluğunun üst sınırı 256 karakterdir.",
- "packageIdLabel": "Paket Tanımlayıcısı",
- "packageNameLabel": "Paket adı",
- "pivCredentialNotConfigured": "Kiracınız için türetilmiş kimlik bilgisi veren seçmediniz. Bu ilkeyi cihazlara başarıyla uygulayabilmeniz için önce bir veren yapılandırmanız gerekiyor.",
- "platformLabel": "Platform",
- "policyDescriptionLabel": "Açıklama",
- "policyNameLabel": "Ad",
- "preComposedIconEnabled": "Önceden derlenmiş",
- "primarySMTPAddress": "Birincil SMTP Adresi",
- "privacyUrlLabel": "Gizlilik URL'si",
- "publisherHint": "Bir yayımcı adı girin",
- "publisherLabel": "Yayımcı",
- "publisherSizeHint": "Yayımcı adının uzunluğu 2 ile 1024 karakter arasında olmalıdır (bu sayılar dahil)",
- "require": "Gerekli Kıl",
- "requireBiometrics": "Uygulamaya erişmek için Biyometriyi gerekli kıl",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "En az bir kapsam etiketi gereklidir",
- "searchAppLabel": "Uygulama seçin",
- "searchAppLinkText": "App Store'da Ara",
- "searchWinGetPublicRepositoryLinkText": "Windows Paket Yöneticisi Topluluk Deposu’nda Arama Yapın",
- "searchWinGetStoreRepositoryLinkText": "Microsoft Store uygulamasında (yeni) arama yapın",
- "selectAAD": "Microsoft Entra özniteliği seçin",
- "selectAppFileLabel": "Dosya seçin",
- "selectAppFileLinkText": "Uygulama paketi dosyası seçin",
- "selectAppFileToUpdateLabel": "Güncelleştirilecek dosyayı seçin",
- "selectAuthMethod": "Kimlik doğrulama yöntemi seçin",
- "selectAuthType": "Kimlik doğrulaması türü seçin",
- "selectCatalogAppLabel": "Uygulama seçin",
- "selectCatalogAppLinkText": "Kurumsal Uygulama Kataloğunda arayın",
- "selectCertificate": "Sertifika seçin",
- "signAllEmails": "Tüm e-postaları imzalayın",
- "signingCertificates": "İmzalama sertifikaları",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Paket Açıklaması",
- "suiteNameLabel": "Paket Adı",
- "targetApplicationBundleIdentifier": "Hedef uygulama paketi tanımlayıcısı",
- "targetedPlatformsLabel": "Hedeflenen platform",
- "tasks": "Görevler",
- "threeDays": "Üç Gün",
- "totalLicenseCount": "Toplam lisans sayısı",
- "twoWeeks": "İki Hafta",
- "unifiedAssignmentsLabel": "Şuna ata:",
- "unlimited": "Sınırsız",
- "urlHint": "Geçerli bir url girin",
- "useManagedBrowserHint": "Yalnızca Android ve iOS. Daha fazla bilgi edinin",
- "useManagedBrowserLabel": "Bu bağlantının açılabilmesi için yönetilen tarayıcı gerektir",
- "userPrinicipalName": "Kullanıcı Asıl Adı",
- "username": "Kullanıcı adı",
- "usernameAttribute": "Microsoft Entra kimliğinden kullanıcı adı özniteliği",
- "usernameAttributreInfoBalloon": "Hesap kimliğini doğrulamak için kullanılacak olan e-posta profili Kullanıcı Asıl Adı'nı belirtin",
- "usernamePassword": "Kullanıcı adı ve parola",
- "webAppUrlHint": "http:// veya https:// ile başlayan geçerli bir url girin",
- "webAppUrlLabel": "Uygulama URL'si",
- "webAppUrlSizeHint": "Uygulama URL’sinin maksimum uzunluğu 1024 karakterdir",
- "windowsUrlValidation": "Aşağıdakine benzer geçerli bir URL girin: https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "Girilen XML Verileri",
- "xmlFormatInvalid": "XML ilkesi biçimi geçersiz.",
- "xmlTooLarge": "Giriş boyutu 1 MB'tan küçük olmalıdır."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "{0} silinemedi",
- "failureCa": "Sertifika yetkilisi ilkeleri tarafından başvurulduğundan {0} silinemedi",
- "modifying": "{0} siliniyor",
- "success": "{0} başarıyla silindi"
- },
- "Notify": {
- "failure": "{0} güncelleştirilemedi",
- "modifying": "{0} değiştiriliyor",
- "success": "{0} başarıyla güncelleştirildi"
- },
- "menuLabel": "Kimlik doğrulaması bağlamı"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Federasyon sağlayıcıları tarafından yerine getirilen kimlik doğrulama yöntemleri gerektirme hakkında daha fazla bilgi edinin.",
- "certificate": "Sertifika kimlik doğrulaması",
- "infoBubble": "ADFS gibi Federasyon sağlayıcısı tarafından karşılanması gereken, gerekli kimlik doğrulama yöntemini belirtin.",
- "multifactor": "Çok faktörlü kimlik doğrulaması",
- "require": "Federasyon kimlik doğrulama yöntemi gerektir (Önizleme)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Kalıcı tarayıcı oturumu ilkesi yalnızca \"Tüm bulut uygulamaları\" seçildiğinde doğru şekilde çalışır. Lütfen bulut uygulamaları seçiminizi güncelleştirin."
- },
- "Option": {
- "always": "Her zaman kalıcı",
- "help": "Kalıcı tarayıcı oturumu, kullanıcılar tarayıcı pencerelerini kapatıp açtıklarında oturumlarının açık kalmasını sağlar. \n
\n
Bu ayar \"Tüm bulut uygulamaları\" seçildiğinde doğru çalışır
\n
Bu, belirteç ömürlerini veya oturum açma sıklığı ayarını etkilemez.
\n
Bu, Şirket Markasında \"Oturumun açık kalması seçeneğini göster\" ayarını geçersiz kılar.
\n
\"Asla kalıcı yapma\", şirket dışı kimlik doğrulaması hizmetlerinden geçirilen tüm kalıcı SSO taleplerini geçersiz kılar.
\n
\"Asla kalıcı yapma\", uygulamalarda ve uygulamalar ile kullanıcının mobil tarayıcısı arasında mobil cihazlardaki SSO'yu engeller.
\n",
- "label": "Kalıcı tarayıcı oturumu",
- "never": "Asla kalıcı yapma"
- },
- "Warning": {
- "allApps": "Kalıcı tarayıcı oturumu yalnızca Tüm bulut uygulamaları seçildiğinde doğru şekilde çalışır. Lütfen bulut uygulamaları seçiminizi değiştirin. Daha fazla bilgi edinmek için buraya tıklayın."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Saatler veya günler",
- "value": "Sıklık"
- },
- "Option": {
- "Day": {
- "plural": "{0} gün",
- "singular": "1 gün"
- },
- "Hour": {
- "plural": "{0} saat",
- "singular": "1 saat"
- },
- "daysOption": "Gün",
- "everytime": "Her seferinde",
- "help": "Kullanıcının bir kaynağa erişmeye çalışırken tekrar oturum açmasının istenmesi için geçmesi gereken süre. Varsayılan ayar 90 günlük bir hareketli zaman aralığıdır, yani en az 90 gün boyunca makinelerinde etkin olmayan kullanıcılardan, bu süre sonunda bir kaynağa ilk kez erişmeyi denediklerinde kimliklerini yeniden doğrulamaları istenir.",
- "hoursOption": "Saat",
- "label": "Oturum açma sıklığı",
- "placeholder": "Birim seçin"
- }
- },
- "mainOption": "Oturum ömrünü değiştir",
- "mainOptionHelp": "Kullanıcılara ne sıklıkta istemde bulunulacağını ve tarayıcı oturumlarının kalıcı olup olmayacağını yapılandırın. Modern kimlik doğrulaması protokollerini desteklemeyen uygulamalar bu ilkelere uymayabilir. Bu gibi durumlarda lütfen uygulama geliştiricisine başvurun."
- },
- "SingleSelectorActive": {
- "failed": "Bu veriler yüklenemiyor.",
- "reattempt": "Veriler yükleniyor. Yeniden deneme {0} / {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Dizin rollerini seçin"
- },
- "Excluded": {
- "gridAria": "Hariç tutulan kullanıcıların listesi"
- },
- "Included": {
- "gridAria": "Dahil edilen kullanıcıların listesi"
- },
- "Validation": {
- "customRoleIncluded": "\"Dizin Rolleri\" en az bir özel rol içerir",
- "customRoleSelected": "En az bir özel rol seçildi",
- "failed": "\"{0}\" yapılandırılmalıdır",
- "roles": "En az bir rol seçin",
- "usersGroups": "En az bir kullanıcı veya grup seçin"
- },
- "learnMore": "Kullanıcılar ve gruplar, iş yükü kimlikleri, dizin rolleri veya dış konuklar gibi ilkenin kime uygulanacağına bağlı olarak erişimi denetleyin."
- },
- "advancedTabText": "Gelişmiş",
- "allCloudAppsErrorBox": "\"Parola değişikliği iste\" izni seçildiğinde \"Tüm bulut uygulamaları\" seçilmelidir",
- "allCloudAppsReauth": "\"Oturum açma sıklığı her seferinde\" oturum denetimi ve \"oturum açma riski\" koşulu seçildiğinde \"Tüm bulut uygulamaları\" seçilmelidir",
- "allCloudOrSpecificApps": "\"Her seferinde oturum açma sıklığı\" oturum denetimi için \"tüm bulut uygulamaları\" veya özellikle desteklenen uygulamalar seçilmelidir",
- "allDayCheckboxLabel": "Tüm gün",
- "allDevicePlatforms": "Herhangi bir aygıt",
- "allGuestUserInfoContent": "Microsoft Entra B2B konuklarını içerir, SharePoint B2B konuklarını içermez",
- "allGuestUserLabel": "Tüm konuk ve dış kullanıcılar",
- "allRiskLevelsOption": "Tüm risk düzeyleri",
- "allTrustedLocationLabel": "Tüm güvenilen konumlar",
- "allUserGroupSetSelectorLabel": "Seçilen tüm kullanıcılar ve gruplar",
- "allUsersReauth": "\"Her seferinde oturum açma sıklığı\" oturum denetimi için \"Tüm Kullanıcılar\" seçeneği belirlenmelidir",
- "allUsersString": "Tüm kullanıcılar",
- "and": "{0} VE {1} ",
- "andWithGrouping": "({0}) VE {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Herhangi bir bulut uygulaması",
- "appContextOptionInfoContent": "İstenen kimlik doğrulaması etiketi",
- "appContextOptionLabel": "İstenen kimlik doğrulama etiketi (Önizleme)",
- "appContextUriPlaceholder": "Örnek: uri:contoso.com:level3",
- "appEnforceInfoBubble": "Uygulama tarafından zorlanan kısıtlamalar, bulut uygulamaları içinde ek yönetim yapılandırmaları gerektirebilir. Kısıtlamalar yalnızca yeni oturumlar için geçerli olur.",
- "appNotSetSeletorLabel": "0 bulut uygulaması seçili",
- "appReauthNotSupported": "Bu uygulama “her zaman oturum açma sıklığı” oturum denetimini desteklemez.",
- "applyConditionClientAppInfoBalloonContent": "Belirli istemci uygulamalarında ilkeyi uygulamak için istemci uygulamalarını yapılandırın",
- "applyConditionDevicePlatformInfoBalloonContent": "Belirli platformlarda ilkeyi uygulamak için cihaz platformlarını yapılandırın",
- "applyConditionDeviceStateInfoBalloonContent": "Belirli cihaz durumlarına ilkeyi uygulamak için cihaz durumlarını yapılandırın",
- "applyConditionLocationInfoBalloonContent": "Güvenilen/güvenilmeyen konumlarda ilkeyi uygulamak için konumları yapılandırın",
- "applyConditionSigninRiskInfoBalloonContent": "Seçili risk düzeylerinde ilkeyi uygulamak için, oturum açma riskini yapılandırın",
- "applyConditionUserRiskInfoBalloonContent": "İlkeyi seçili risk düzeylerine uygulamak için kullanıcı riskini yapılandırın",
- "applyConditonLabel": "Yapılandır",
- "ariaLabelPolicyDisabled": "İlke devre dışı",
- "ariaLabelPolicyEnabled": "İlke etkin",
- "ariaLabelPolicyReportOnly": "İlke Yalnızca rapor modunda",
- "blockAccess": "Erişimi engelle",
- "builtInDirectoryRoleLabel": "Yerleşik dizin rolleri",
- "casCustomControlInfo": "Özel ilkelerin Cloud App Security portalında yapılandırılması gerekir. Bu denetim öne çıkan uygulamalar için anında çalışır ve herhangi bir uygulama için kendi kendine eklenebilir. Her iki senaryo hakkında daha fazla bilgi edinmek için buraya tıklayın.",
- "casInfoBubble": "Bu denetim çeşitli bulut uygulamaları için çalışır.",
- "casPreconfiguredControlInfo": "Bu denetim öne çıkan uygulamalar için anında çalışır ve herhangi bir uygulama için kendi kendine eklenebilir. Her iki senaryo hakkında daha fazla bilgi edinmek için buraya tıklayın.",
- "cert64DownloadCol": "Base64 sertifikasını indir",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Sertifikayı indir",
- "certDurationCol": "Süre Sonu",
- "certDurationStartCol": "Şu tarihten itibaren geçerli",
- "certName": "VpnCert",
- "certainApps": "\"Çok faktörlü kimlik doğrulaması gerektir\" ve \"Parola değişikliği gerektir\" izinleri seçilmezse \"Her seferinde oturum açma sıklığı\" için yalnızca belirli uygulamalar desteklenir",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Uygulama Seçin",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Seçilen Uygulamalar",
- "chooseApplicationsEmpty": "Uygulama Yok",
- "chooseApplicationsNone": "Yok",
- "chooseApplicationsNoneFound": "\"{0}\" ifadesini bulamadık. Başka bir ad veya kimlik deneyin.",
- "chooseApplicationsPlural": "{0} ve {1} uygulama daha",
- "chooseApplicationsReAuthEverytimeInfo": "Uygulamanızı mı arıyorsunuz? Bazı uygulamalar “Yeniden kimlik doğrulaması gerektir - her seferinde” oturum denetimi ile kullanılamaz",
- "chooseApplicationsRemove": "Kaldır",
- "chooseApplicationsReturnedPlural": "{0} uygulama bulundu",
- "chooseApplicationsReturnedSingular": "1 uygulama bulundu",
- "chooseApplicationsSearchBalloon": "Adını veya kimliğini girerek bir Uygulama arayın.",
- "chooseApplicationsSearchHint": "Uygulamalarda Ara...",
- "chooseApplicationsSearchLabel": "Uygulamalar",
- "chooseApplicationsSearching": "Aranıyor...",
- "chooseApplicationsSelect": "Seç",
- "chooseApplicationsSelected": "Seçili",
- "chooseApplicationsSingular": "{0} ve 1 uygulama daha",
- "chooseApplicationsTooMany": "Görüntülenen sonuçlardan daha fazlası bulundu. Lütfen arama kutusunu kullanarak filtreleyin.",
- "chooseLocationCorpnetItem": "Şirket ağı",
- "chooseLocationSelectedLocationsLabel": "Seçili konumlar",
- "chooseLocationTrustedIpsItem": "Çok faktörlü kimlik doğrulaması güvenilen IP'leri",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Konum Seçin",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Seçili Konumlar",
- "chooseLocationsEmpty": "Konum Yok",
- "chooseLocationsExcludedSelectorTitle": "Seçin",
- "chooseLocationsIncludedSelectorTitle": "Seçin",
- "chooseLocationsNone": "Yok",
- "chooseLocationsNoneFound": "\"{0}\" ifadesini bulamadık. Başka bir ad veya kimlik deneyin.",
- "chooseLocationsPlural": "{0} ve {1} uygulama daha",
- "chooseLocationsRemove": "Kaldır",
- "chooseLocationsReturnedPlural": "{0} konum bulundu",
- "chooseLocationsReturnedSingular": "1 konum bulundu",
- "chooseLocationsSearchBalloon": "Adını girerek bir Konum arayın.",
- "chooseLocationsSearchHint": "Konum Arayın...",
- "chooseLocationsSearchLabel": "Konumlar",
- "chooseLocationsSearching": "Aranıyor...",
- "chooseLocationsSelect": "Seçin",
- "chooseLocationsSelected": "seçili",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Seçin",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Seçin",
- "chooseLocationsSingular": "{0} ve 1 uygulama daha",
- "chooseLocationsTooMany": "Görüntülenen sonuçlardan daha fazlası bulundu. Lütfen arama kutusunu kullanarak filtreleyin.",
- "claimProviderAddCommandText": "Yeni özel denetim",
- "claimProviderAddNewBladeTitle": "Yeni özel denetim",
- "claimProviderDeleteCommand": "Sil",
- "claimProviderDeleteDescription": "'{0}' adlı ağı silmek istediğinizden emin misiniz? Bu eylem geri alınamaz.",
- "claimProviderDeleteTitle": "Emin misiniz?",
- "claimProviderEditInfoText": "Talep sağlayıcılarınız tarafından verilen özelleştirilmiş denetimler için JSON girin.",
- "claimProviderNotificationCreateDescription": "'{0}' adlı özel denetim oluşturuluyor",
- "claimProviderNotificationCreateFailedDescription": "'{0}' özel denetimi oluşturulamadı. Lütfen daha sonra yeniden deneyin.",
- "claimProviderNotificationCreateFailedTitle": "Özel denetim oluşturulamadı",
- "claimProviderNotificationCreateSuccessDescription": "'{0}' adlı özel denetim oluşturuldu",
- "claimProviderNotificationCreateSuccessTitle": "'{0}' oluşturuldu",
- "claimProviderNotificationCreateTitle": "'{0}' oluşturuluyor",
- "claimProviderNotificationDeleteDescription": "'{0}' adlı özel denetim siliniyor",
- "claimProviderNotificationDeleteFailedDescription": "'{0}' özel denetimi silinemedi. Lütfen daha sonra yeniden deneyin.",
- "claimProviderNotificationDeleteFailedTitle": "Özel denetim silinemedi",
- "claimProviderNotificationDeleteSuccessDescription": "'{0}' adlı özel denetim silindi",
- "claimProviderNotificationDeleteSuccessTitle": "'{0}' silindi",
- "claimProviderNotificationDeleteTitle": "{0} siliniyor",
- "claimProviderNotificationUpdateDescription": "'{0}' adlı özel denetim güncelleştiriliyor",
- "claimProviderNotificationUpdateFailedDescription": "'{0}' özel denetimi güncelleştirilemedi. Lütfen daha sonra yeniden deneyin.",
- "claimProviderNotificationUpdateFailedTitle": "Özel denetim güncelleştirilemedi",
- "claimProviderNotificationUpdateSuccessDescription": "'{0}' adlı özel denetim güncelleştirildi",
- "claimProviderNotificationUpdateSuccessTitle": "'{0}' güncelleştirildi",
- "claimProviderNotificationUpdateTitle": "'{0}' güncelleştiriliyor",
- "claimProviderValidationAppIdInvalid": "\"AppId\" değeri geçerli değil. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationClientIdMissing": "Veriler \"ClientId\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationControlClaimsRequestedMissing": "\"Control\" bir \"ClaimsRequested\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "\"ClaimsRequested\" öğesi bir \"Type\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationControlIdAlreadyExists": "\"Control\" \"Id\" değeri zaten var. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationControlIdMissing": "\"Control\" bir \"Id\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "\"Control\" \"Id\" değerine mevcut ilkede başvurulduğundan bu değer kaldırılamıyor. Lütfen öncelikle bu değeri ilkeden kaldırın.",
- "claimProviderValidationControlIdTooManyControls": "\"Control\" özelliği çok fazla denetim içeriyor. Lütfen gözden geçirip tekrar deneyin.",
- "claimProviderValidationControlIdValueReserved": "\"Control\" \"Id\" değeri, ayrılmış bir anahtar sözcük. Lütfen farklı bir kimlik kullanın.",
- "claimProviderValidationControlNameAlreadyExists": "\"Control\" \"Name\" değeri zaten var. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationControlNameMissing": "\"Control\" bir \"Name\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationControlsMissing": "Veriler \"Controls\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationDiscoveryUrlMissing": "Veriler \"DiscoveryUrl\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationInvalid": "Sağlanan veriler geçerli değil. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationInvalidJsonDefinition": "Özel denetim kaydedilemiyor. JSON metnini gözden geçirip yeniden deneyin.",
- "claimProviderValidationNameAlreadyExists": "\"Name\" değeri zaten var. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationNameMissing": "Veriler \"Name\" değerini içermiyor. Lütfen gözden geçirip yeniden deneyin.",
- "claimProviderValidationUnknown": "Sağlanan veriler doğrulanırken bilinmeyen bir hata oluştu. Lütfen gözden geçirip yeniden deneyin.",
- "claimProvidersNone": "Özel denetim yok",
- "claimProvidersSearchPlaceholder": "Arama denetimleri.",
- "classicPoilcyFilterTitle": "Göster",
- "classicPolicyAllPlatforms": "Tüm Platformlar",
- "classicPolicyClientAppBrowserAndNative": "Tarayıcı, mobil uygulamalar ve masaüstü istemcileri",
- "classicPolicyCloudAppTitle": "Bulut uygulaması",
- "classicPolicyControlAllow": "İzin Ver",
- "classicPolicyControlBlock": "Engelle",
- "classicPolicyControlBlockWhenNotAtWork": "Çalışmıyorken erişimi engelle",
- "classicPolicyControlRequireCompliantDevice": "Uyumlu cihaz gerektir",
- "classicPolicyControlRequireDomainJoinedDevice": "Etki alanına katılmış cihaz gerektir",
- "classicPolicyControlRequireMfa": "Çok faktörlü kimlik doğrulaması gerektir",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Çalışmıyorken çok faktörlü kimlik doğrulaması gerektir",
- "classicPolicyDeleteCommand": "Sil",
- "classicPolicyDeleteFailTitle": "Klasik ilke silinemedi",
- "classicPolicyDeleteInProgressTitle": "Klasik ilke siliniyor",
- "classicPolicyDeleteSuccessTitle": "Klasik ilke silindi",
- "classicPolicyDetailBladeTitle": "Ayrıntılar",
- "classicPolicyDisableCommand": "Devre dışı bırak",
- "classicPolicyDisableConfirmation": "'{0}' adlı ilkeyi devre dışı bırakmak istediğinizden emin misiniz? Bu eylem geri alınamaz.",
- "classicPolicyDisableFailDescription": "'{0}' devre dışı bırakılamadı",
- "classicPolicyDisableFailTitle": "Klasik ilke devre dışı bırakılamadı",
- "classicPolicyDisableInProgressDescription": "'{0}' devre dışı bırakılıyor",
- "classicPolicyDisableInProgressTitle": "Klasik ilke devre dışı bırakılıyor",
- "classicPolicyDisableSuccessDescription": "'{0}' başarıyla devre dışı bırakıldı",
- "classicPolicyDisableSuccessTitle": "Klasik ilke devre dışı bırakıldı",
- "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync tarafından desteklenen platformlar",
- "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync tarafından desteklenmeyen platformlar",
- "classicPolicyExcludedPlatformsTitle": "Dışlanan cihaz platformları",
- "classicPolicyFilterAll": "Tüm ilkeler",
- "classicPolicyFilterDisabled": "Devre dışı ilkeler",
- "classicPolicyFilterEnabled": "Etkin ilkeler",
- "classicPolicyIncludeExcludeMembersDescription": "Grupları dışlayarak aşamalı ilke geçişi gerçekleştirebilirsiniz.",
- "classicPolicyIncludeExcludeMembersTitle": "Grupları içerme/dışlama",
- "classicPolicyIncludedPlatformsTitle": "Dahil edilen cihaz platformları",
- "classicPolicyManualMigrationMessage": "Bu ilkenin el ile geçirilmesi gerekiyor.",
- "classicPolicyMigrateCommand": "Geçir",
- "classicPolicyMigrateConfirmation": "'{0}' adlı ilkeyi geçirmek istediğinizden emin misiniz? Bu ilke yalnızca bir kez geçirilebilir.",
- "classicPolicyMigrateFailDescription": "'{0}' geçirilemedi",
- "classicPolicyMigrateFailTitle": "Klasik ilke geçirilemedi",
- "classicPolicyMigrateInProgressDescription": "'{0}' geçiriliyor",
- "classicPolicyMigrateInProgressTitle": "Klasik ilke geçiriliyor",
- "classicPolicyMigrateRecommendText": "Öneri: Yeni Azure portalı ilkelerine geçin.",
- "classicPolicyMigrateSuccessTitle": "Klasik ilke başarıyla geçirildi",
- "classicPolicyMigratedSuccessDescription": "Bu klasik ilke artık İlkeler bölümünden yönetilebilir.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "Bu klasik ilke, {0} yeni ilke olarak geçirildi. Yeni ilkeleri yönetmek için İlkeler bölümünü kullanabilirsiniz.",
- "classicPolicyNoEditPermissionMsg": "Bu ilkeyi düzenleme izniniz yok. İlkeyi yalnızca genel yöneticiler ve güvenlik yöneticileri düzenleyebilir. Daha fazla bilgi edinmek için buraya tıklayın.",
- "classicPolicySaveFailDescription": "'{0}' kaydedilemedi",
- "classicPolicySaveFailTitle": "Klasik ilke kaydedilemedi",
- "classicPolicySaveInProgressDescription": "'{0}' kaydediliyor",
- "classicPolicySaveInProgressTitle": "Klasik ilke kaydediliyor",
- "classicPolicySaveSuccessDescription": "'{0}' başarıyla kaydedildi",
- "classicPolicySaveSuccessTitle": "Klasik ilke kaydedildi",
- "clientAppBladeLegacyInfoBanner": "Eski kimlik doğrulaması şu anda desteklenmiyor",
- "clientAppBladeLegacyUpsellBanner": "Desteklenmeyen istemci uygulamalarını engelle (Önizleme)",
- "clientAppBladeTitle": "İstemci uygulamaları",
- "clientAppDescription": "Bu ilkenin uygulanacağı istemci uygulamalarını seçin",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync, şu anda diğer koşulların hiçbirini desteklemiyor",
- "clientAppLearnMore": "Kullanıcı erişimini, modern kimlik doğrulaması kullanmayan belirli istemci uygulamalarını hedeflemek için denetleyin.",
- "clientAppLegacyHeader": "Eski kimlik doğrulama istemcileri",
- "clientAppMobileDesktop": "Mobil uygulamalar ve masaüstü istemcileri",
- "clientAppModernHeader": "Modern kimlik doğrulama istemcileri",
- "clientAppOnlySupportedPlatforms": "İlkeyi yalnızca desteklenen platformlara uygula",
- "clientAppSelectSpecificClientApps": "İstemci uygulamalarını seçin",
- "clientAppWebBrowser": "Tarayıcı",
- "clientAppsSelectedLabel": "{0} eklendi",
- "clientTypeBrowser": "Tarayıcı",
- "clientTypeEas": "Exchange ActiveSync istemcileri",
- "clientTypeEasInfo": "Yalnızca eski kimlik doğrulaması kullanan Exchange ActiveSync istemcileri.",
- "clientTypeModernAuth": "Modern kimlik doğrulama istemcileri",
- "clientTypeOtherClients": "Diğer istemciler",
- "clientTypeOtherClientsInfo": "Bu, eski Office istemcilerini ve diğer posta protokollerini (POP, IMAP, SMTP vb.) içerir. [Daha fazla bilgi][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "Bu ilkede yapılandırılan {0} bulut uygulaması dizinden silinmiş, ancak bu durum ilkedeki diğer uygulamaları etkilemiyor. İlkenin uygulama bölümünü sonraki ilk güncelleştirmenizde, silinen uygulamalar ilkeden otomatik olarak kaldırılır.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "Tüm Microsoft uygulamaları",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Microsoft bulut, mobil ve masaüstü uygulamalarına izin ver (Önizleme)",
- "cloudappsSelectionBladeAllCloudapps": "Tüm bulut uygulamaları",
- "cloudappsSelectionBladeExcludeDescription": "İlkenin dışında tutulacak bulut uygulamalarını seçin",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Dışlanan bulut uygulamalarını seçin",
- "cloudappsSelectionBladeIncludeDescription": "Bu ilkenin uygulanacağı bulut uygulamalarını seçin",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Seç",
- "cloudappsSelectionBladeSelectedCloudapps": "Uygulama seç",
- "cloudappsSelectorInfoBallonText": "Kullanıcının, işlerini yapmak için eriştiği hizmetler. Örneğin, 'Salesforce'",
- "cloudappsSelectorPluralExcluded": "{0} uygulama dışlandı",
- "cloudappsSelectorPluralIncluded": "{0} uygulama eklendi",
- "cloudappsSelectorSingularExcluded": "1 uygulama dışlandı",
- "cloudappsSelectorSingularIncluded": "1 uygulama eklendi",
- "cloudappsSelectorUserPlural": "{0} uygulama",
- "cloudappsSelectorUserSingular": "1 uygulama",
- "conditionLabelMulti": "{0} koşul seçildi",
- "conditionLabelOne": "1 koşul seçildi",
- "conditionalAccessBladeTitle": "Koşullu Erişim",
- "conditionsNotSelectedLabel": "Yapılandırılmadı",
- "conditionsReqMfaReauthSet": "\"Çok faktörlü kimlik doğrulaması gerektir\" izni ve \"her seferinde oturum açma sıklığı\" oturum denetimi seçili olduğu için bazı seçenekler kullanılamıyor",
- "conditionsReqPwSet": "Şu anda seçilmekte olan \"Parola değişikliği iste\" izni nedeniyle bazı seçenekler kullanılamıyor",
- "configureCasText": "Cloud App Security'yi Yapılandırın",
- "configureCustomControlsText": "Özel ilke yapılandır",
- "controlLabelMulti": "{0} denetim seçildi",
- "controlLabelOne": "1 denetim seçildi",
- "controlValidatorText": "Lütfen en az bir denetim seçin",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Uyumlu cihazlar gerektirme hakkında daha fazla bilgi edinin.",
- "controlsDeviceComplianceInfoBubble": "Cihaz, Intune ile uyumlu olmalıdır. Cihaz uyumlu değilse, kullanıcıdan cihazı uyumlu hale getirmesi istenir.",
- "controlsDomainJoinedAriaLabel": "Microsoft Entra hibrit ile katılan cihazlar gerektirme hakkında daha fazla bilgi edinin.",
- "controlsDomainJoinedInfoBubble": "Cihazların Microsoft Entra hibrit’e katılmış olması gerekir.",
- "controlsMamAriaLabel": "Onaylı istemci uygulamaları gerektirme hakkında daha fazla bilgi edinin.",
- "controlsMamInfoBubble": "Cihaz bu onaylı istemci uygulamalarını kullanmalıdır.",
- "controlsMfaInfoBubble": "Kullanıcının, telefon görüşmeleri ve kısa mesaj gibi ek güvenlik gereksinimleri tamamlaması gerekir",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "İlke korumalı uygulamalar gerektirme hakkında daha fazla bilgi edinin.",
- "controlsRequireCompliantAppInfoBubble": "Cihazın ilke korumalı uygulamaları kullanması gerekir.",
- "controlsRequirePasswordResetAriaLabel": "Parola değişikliği gerektirme hakkında daha fazla bilgi edinin.",
- "controlsRequirePasswordResetInfoBubble": "Kullanıcı kaynaklı riski azaltmak için parola değişikliği gerektirin. Bu seçenek, çok faktörlü kimlik doğrulaması da gerektirir. Diğer denetimler kullanılamaz.",
- "countriesRadiobuttonInfoBalloonContent": "Oturum açma işleminin yapıldığı ülke/bölge, kullanıcının IP adresine göre belirlenir.",
- "createNewVpnCert": "Yeni sertifika",
- "createdTimeLabel": "Oluşturma zamanı",
- "customRoleLabel": "Özel roller (desteklenmiyor)",
- "dateRangeTypeLabel": "Tarih aralığı",
- "daysOfWeekPlaceholderText": "Haftanın günlerini filtreleyin",
- "daysOfWeekTypeLabel": "Haftanın günleri",
- "deletePolicyNoLicenseText": "Bu ilkeyi artık silebilirsiniz. İlke silindikten sonra, gerekli lisanslara sahip olmadığınız sürece ilkeyi yeniden oluşturamazsınız.",
- "descriptionContentForControlsAndOr": "Birden fazla denetim için",
- "devicePlatform": "Cihaz platformu",
- "devicePlatformConditionHelpDescription": "İlkeyi seçili cihaz platformlarına uygulayın.\n[Daha fazla bilgi][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} eklendi",
- "devicePlatformIncludeExclude": "{0} ve {1} dışlandı",
- "devicePlatformNoSelectionError": "Cihaz platformlarını seçmek için bir alt öğenin seçilmesi gerekir.",
- "devicePlatformsNone": "Yok",
- "deviceSelectionBladeExcludeDescription": "İlkenin dışında tutulacak platformları seçin",
- "deviceSelectionBladeIncludeDescription": "Bu ilkeye dahil edilecek cihaz platformlarını seçin",
- "deviceStateAll": "Tüm cihaz durumları",
- "deviceStateCompliant": "Cihaz uyumlu olarak işaretli",
- "deviceStateCompliantInfoContent": "Intune ile uyumlu cihazlar bu ilkenin değerlendirilmesinden dışlanır; örneğin ilke erişimi engellerse, Intune ile uyumlu cihazlar dışındaki tüm cihazları engeller.",
- "deviceStateConditionConfigureInfoContent": "Cihaz durumuna göre ilkeyi yapılandırma",
- "deviceStateConditionSelectorInfoContent": "Kullanıcının oturum açmak için kullandığı cihazın 'Microsoft Entra hibrit ile katılan' veya 'uyumlu olarak işaretli' olup olmadığını belirtir.\n Bu kullanımdan kaldırıldı. Bunun yerine '{1}' kullanın.",
- "deviceStateConditionSelectorLabel": "Cihaz durumu (kullanım dışı)",
- "deviceStateDomainJoined": "Cihaz, Microsoft Entra hibrite katılmış",
- "deviceStateDomainJoinedInfoContent": "Microsoft Entra hibrit ile katılan cihazlar bu ilkenin değerlendirilmesinden dışlanır; örneğin ilke erişimi engellerse, Microsoft Entra hibrit’e katılmış cihazlar dışındaki tüm cihazları engeller.",
- "deviceStateDomainJoinedInfoLinkText": "Daha fazla bilgi edinin.",
- "deviceStateExcludeDescription": "Cihazları ilkeden dışlamak için kullanılan cihaz durumu koşulunu seçin.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} ve şunu dışla: {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} ve şunları dışla: {1} ve {2}",
- "directoryRoleInfoContent": "Yerleşik dizin rollerine ilke atayın.",
- "directoryRolesLabel": "Dizin rolleri",
- "discardbutton": "At",
- "downloadDefaultFileName": "IP Aralıkları",
- "downloadExampleFileName": "Örnek",
- "downloadExampleHeader": "Bu örnek dosyasında, kabul edilebilir veri türleri gösterilmektedir. # ile başlayan satırlar yoksayılır.",
- "duplicate": "Çoğalt",
- "duplicatePolicyName": "{0} KOPYASI",
- "endDatePickerLabel": "Uçlar",
- "endTimePickerLabel": "Bitiş saati",
- "enterCountryText": "IP adresi ve Ülke/Bölge bir çift olarak değerlendirilir. Ülkeyi seçin.",
- "enterIpText": "IP adresi ve Ülke/Bölge bir çift olarak değerlendirilir. IP adresi girin.",
- "enterUserText": "Hiçbir kullanıcı seçilmedi. Bir kullanıcı seçin.",
- "evaluationResult": "Değerlendirme sonucu",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Yalnızca desteklenen platformlarla Exchange ActiveSync",
- "excludeAllTrustedLocationSelectorText": "tüm güvenilen konumları hariç tut",
- "featureRequiresP2": "Bu özellik, Microsoft Entra P2 lisansı gerektirir.",
- "friday": "Cuma",
- "grantControls": "İzin verme denetimleri",
- "gridNetworkTrusted": "Güvenilir",
- "gridPolicyCreatedDateTime": "Oluşturulma Tarihi",
- "gridPolicyEnabled": "Etkin",
- "gridPolicyModifiedDateTime": "Değişiklik Tarihi",
- "gridPolicyName": "İlke Adı",
- "gridPolicyState": "Durum",
- "groupSelectionBladeExcludeDescription": "İlkenin dışında tutulacak grupları seçin",
- "groupSelectionBladeExcludedSelectorTitle": "Dışlanan grupları seçin",
- "groupSelectionBladeSelect": "Grupları seçin",
- "groupSelectorInfoBallonText": "Dizinde ilkenin uygulandığı gruplar. Örneğin, 'Pilot grup'",
- "groupsSelectionBladeTitle": "Gruplar",
- "helpCommonScenariosText": "Sık karşılaşılan senaryolar ilginizi çekiyor mu?",
- "helpCondition1": "Herhangi bir kullanıcı şirket ağının dışında olduğunda",
- "helpCondition2": "‘Yöneticiler’ grubundaki kullanıcılar oturum açtığında",
- "helpConditionsTitle": "Koşullar",
- "helpControl1": "Çok faktörlü kimlik doğrulaması ile oturum açmaları gerekir",
- "helpControl2": "Intune ile uyumlu veya etki alanına katılmış bir cihaz kullanıyor olmaları gerekir",
- "helpControlsTitle": "Denetimler",
- "helpIntroText": "Koşullu Erişim size belirli koşullar oluştuğunda erişim gereksinimleri uygulamaya koyma olanağı sunar. Birkaç örneğe bakalım",
- "helpIntroTitle": "Koşullu Erişim nedir?",
- "helpLearnMoreText": "Koşullu Erişim hakkında daha fazla bilgi edinmek ister misiniz?",
- "helpStartStep1": "\"+ Yeni ilke\" seçeneğine tıklayarak ilk ilkenizi oluşturun",
- "helpStartStep2": "İlke Koşullarını ve Denetimlerini belirtin",
- "helpStartStep3": "İşiniz bittiğinde ilkeyi Etkinleştirmeyi ve Oluşturmayı unutmayın",
- "helpStartTitle": "Kullanmaya başlayın",
- "highRisk": "Yüksek",
- "includeAndExcludeAppsTextFormat": "Dahil et: {0}. Hariç tut: {1}.",
- "includeAppsTextFormat": "Dahil et: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Bilinmeyen alanlar, bir ülke/bölge ile eşleştirilemeyen IP adresleridir.",
- "includeUnknownAreasCheckboxLabel": "Bilinmeyen alanları dahil et",
- "infoCommandLabel": "Bilgi",
- "invalidCertDuration": "Sertifika süresi geçersiz",
- "invalidIpAddress": "Değer, geçerli bir IP adresi olmalıdır",
- "invalidReAuthSignInRiskOptionSelected": "“Oturum açma sıklığı her zaman” oturum denetimi, “oturum açma riski” koşul denetiminde “risk yok” seçimine izin vermiyor.",
- "invalidUriErrorMsg": "Lütfen geçerli bir URI girin. Örneğin, 'uri:contoso.com:acr' ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Tümünü yükle",
- "loading": "Yükleniyor...",
- "locationConfigureNamedLocationsText": "Güvenilen tüm konumları yapılandır",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Konum adı çok uzun. En fazla 256 karakter uzunluğunda olabilir",
- "locationSelectionBladeExcludeDescription": "İlkenin dışında tutulacak konumları seçin",
- "locationSelectionBladeIncludeDescription": "Bu ilkeye dahil edilecek konumları seçin",
- "locationsAllLocationsLabel": "Herhangi bir konum",
- "locationsAllNamedLocationsLabel": "Güvenilen tüm IP'ler",
- "locationsAllPrivateLinksLabel": "Kiracımdaki Tüm Özel Bağlantılar",
- "locationsIncludeExcludeLabel": "{0} ve tüm güvenilen IP'leri dışla",
- "locationsSelectedPrivateLinksLabel": "Seçili Özel Bağlantılar",
- "lowRisk": "Düşük",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "Kurumunuzun Koşullu Erişim ilkelerini yönetebilmesi için Microsoft Entra Kimlik P1 veya P2 gerekiyor.",
- "manageSecurityDefaultsAriaLabel": "Güvenlik varsayılanları ayarlarını yönetin.",
- "markAsTrustedCheckboxInfoBalloonContent": "Güvenilen bir konumdan oturum açmak, kullanıcının oturum açma riskini azaltır. Bu konumu yalnızca, girilen IP aralıkları şirketiniz tarafından tanınıyor ve bu IP aralıklarına güveniliyorsa güvenilen olarak işaretleyin.",
- "markAsTrustedCheckboxLabel": "Güvenilen konum olarak işaretle",
- "mediumRisk": "Orta",
- "memberSelectionCommandRemove": "Kaldır",
- "menuItemClaimProviderControls": "Özel denetimler (Önizleme)",
- "menuItemClassicPolicies": "Klasik ilkeler",
- "menuItemInsightsAndReporting": "İçgörüler ve raporlama",
- "menuItemManage": "Yönet",
- "menuItemNamedLocationsPreview": "Adlandırılmış konumlar (Önizleme)",
- "menuItemNamedNetworks": "Adlandırılmış konumlar",
- "menuItemPolicies": "İlkeler",
- "menuItemTermsOfUse": "Kullanım koşulları",
- "modifiedTimeLabel": "Değiştirme saati",
- "monday": "Pazartesi",
- "nameLabel": "Ad",
- "namedLocationCountryInfoBanner": "Ülkelere/bölgelere yalnızca IPv4 adresleri eşlenir. IPv6 adresleri bilinmeyen ülkelerde/bölgelerde yer alır.",
- "namedLocationTypeCountry": "Ülkeler/Bölgeler",
- "namedLocationTypeLabel": "Konumu şunu kullanarak tanımla:",
- "namedLocationUpsellBanner": "Bu görünüm kullanımdan kaldırıldı. Yeni ve iyileştirilmiş ‘Adlandırılmış konumlar’ görünümüne gidin.",
- "namedLocationsHelpDescription": "Adlandırılmış konumlar, Microsoft Entra Kimlik güvenlik raporları tarafından, hatalı pozitif sonuçları ve Microsoft Entra Koşullu Erişim ilkelerini azaltmak için kullanılır.\n[Daha fazla bilgi][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Yeni bir IP aralığı ekleyin (ör: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "En az bir ülke/bölge seçmeniz gerekiyor",
- "namedNetworkDeleteCommand": "Sil",
- "namedNetworkDeleteDescription": "'{0}' adlı ağı silmek istediğinizden emin misiniz? Bu eylem geri alınamaz.",
- "namedNetworkDeleteTitle": "Emin misiniz?",
- "namedNetworkDownloadIpRange": "İndir",
- "namedNetworkInvalidRange": "Değer, geçerli bir IP aralığı olmalıdır.",
- "namedNetworkIpRangeNeeded": "En az bir geçerli IP aralığı gereklidir",
- "namedNetworkIpRangesDescriptionContent": "Kuruluşunuzun IP aralıklarını yapılandırın",
- "namedNetworkIpRangesTab": "IP aralıkları",
- "namedNetworkListAdd": "Yeni konum",
- "namedNetworkListConfigureTrustedIps": "Çok faktörlü kimlik doğrulaması güvenilen IP'lerini yapılandırma",
- "namedNetworkNameDescription": "Örnek: 'Redmond ofisi'",
- "namedNetworkNameInvalid": "Belirtilen ad geçersiz.",
- "namedNetworkNameRequired": "Bu konum için bir ad belirtmelisiniz.",
- "namedNetworkNoIpRanges": "IP aralığı yok",
- "namedNetworkNotificationCreateDescription": "'{0}' adlı konum oluşturuluyor",
- "namedNetworkNotificationCreateFailedDescription": "'{0}' adlı konum oluşturulamadı. Lütfen daha sonra yeniden deneyin.",
- "namedNetworkNotificationCreateFailedTitle": "Konum oluşturulamadı",
- "namedNetworkNotificationCreateSuccessDescription": "'{0}' adlı konum oluşturuldu",
- "namedNetworkNotificationCreateSuccessTitle": "'{0}' oluşturuldu",
- "namedNetworkNotificationCreateTitle": "'{0}' oluşturuluyor",
- "namedNetworkNotificationDeleteDescription": "'{0}' adlı konum siliniyor",
- "namedNetworkNotificationDeleteFailedDescription": "'{0}' adlı konum silinemedi. Lütfen daha sonra yeniden deneyin.",
- "namedNetworkNotificationDeleteFailedTitle": "Konum Silinemedi",
- "namedNetworkNotificationDeleteSuccessDescription": "'{0}' adlı konum silindi",
- "namedNetworkNotificationDeleteSuccessTitle": "'{0}' silindi",
- "namedNetworkNotificationDeleteTitle": "{0} siliniyor",
- "namedNetworkNotificationUpdateDescription": "'{0}' adlı konum güncelleştiriliyor",
- "namedNetworkNotificationUpdateFailedDescription": "'{0}' adlı konum güncelleştirilemedi. Lütfen daha sonra yeniden deneyin.",
- "namedNetworkNotificationUpdateFailedTitle": "Konum Güncelleştirilemedi",
- "namedNetworkNotificationUpdateSuccessDescription": "'{0}' adlı konum güncelleştirildi",
- "namedNetworkNotificationUpdateSuccessTitle": "'{0}' güncelleştirildi",
- "namedNetworkNotificationUpdateTitle": "'{0}' güncelleştiriliyor",
- "namedNetworkSearchPlaceholder": "Konumlarda arama yapın.",
- "namedNetworkUploadFailedDescription": "Sağlanan dosya ayrıştırılırken hata oluştu. Karşıya yüklediğiniz dosyanın, her satırı CIDR biçiminde olan bir düz metin dosyası olduğundan emin olun.",
- "namedNetworkUploadFailedTitle": "'{0}' ayrıştırılamadı",
- "namedNetworkUploadInProgressDescription": "'{0}' dosyasından geçerli CIDR değerleri ayrıştırılmaya çalışılıyor.",
- "namedNetworkUploadInProgressTitle": "'{0}' ayrıştırılıyor",
- "namedNetworkUploadInvalidDescription": "'{0}' dosyası çok büyük ya da biçimi geçersiz.",
- "namedNetworkUploadInvalidTitle": "'{0}' Geçersiz",
- "namedNetworkUploadIpRange": "Karşıya yükle",
- "namedNetworkUploadSuccessDescription": "{0} satır analiz edildi. {1} tanesinin biçimi hatalı. {2} tanesi atlandı.",
- "namedNetworkUploadSuccessTitle": "'{0}' dosyasını ayrıştırma işlemi tamamlandı",
- "namedNetworksAdd": "Adlandırılmış yeni konum",
- "namedNetworksConditionHelpDescription": "Kullanıcı erişimini kullanıcıların fiziksel konumlarına göre denetleyin.\n[Daha fazla bilgi][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} ve {1} dışlandı",
- "namedNetworksHelpDescription": "Adlandırılmış konumlar, Microsoft Entra Kimliği güvenlik raporları tarafından, hatalı pozitif sonuçları ve Microsoft Entra Koşullu Erişim ilkelerini azaltmak için kullanılır.\n[Daha fazla bilgi][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} eklendi",
- "namedNetworksNone": "Adlandırılmış konum bulunamadı.",
- "namedNetworksTitle": "Konumları yapılandırın",
- "namednetworkExceedingSizeErrorBladeTitle": "Hata ayrıntıları",
- "namednetworkExceedingSizeErrorDetailText": "Daha fazla ayrıntı için buraya tıklayın.",
- "namednetworkExceedingSizeErrorMessage": "Adlandırılmış konumlar için izin verilen en fazla depolama boyutu aşıldı. Daha kısa bir listeyle tekrar deneyin. Daha fazla ayrıntı görüntülemek için buraya tıklayın.",
- "needMfaSecondary": "\"Her seferinde oturum açma sıklığı\" \"Yalnızca ikincil kimlik doğrulama yöntemleri\" ile seçildiğinde \"Çok faktörlü kimlik doğrulaması gerektir\" seçeneği seçilmelidir",
- "needMfaSpecificApps": "\"Her seferinde oturum açma sıklığı\" oturum denetimi, özellikle desteklenen uygulamalar seçildiğinde \"çok faktörlü kimlik doğrulaması gerektir\" izin denetimini gerektirir",
- "newCertName": "yeni sertifika",
- "noAttributePermissionsError": "İlke oluşturmak veya güncelleştirmek için ayrıcalıklar yetersiz. Dinamik filtre eklemek/düzenlemek için öznitelik tanımı okuyucu rolü gereklidir.",
- "noPolicyRowMessage": "İlke yok",
- "noSPSelected": "Hiç bir hizmet sorumlusu seçilmedi",
- "noUpdatePermissionMessage": "Bu ayarları güncelleştirme izniniz yok. Erişim elde etmek için genel yöneticinize başvurun.",
- "noUserSelected": "Kullanıcı seçilmedi",
- "noneRisk": "Risk yok",
- "office365Description": "Bu uygulamalar Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer ve diğerleridir.",
- "office365InfoBox": "Seçilen uygulamalardan en az biri Office 365'in parçası. Bunun yerine Office 365'te ilke ayarlamanızı öneririz.",
- "oneUserSelected": "1 kullanıcı seçildi",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Bu ilkeyi yalnızca genel yöneticiler kaydedebilir.",
- "or": "{0} VEYA {1} ",
- "pickerDoneCommand": "Bitti",
- "policiesBladeAdPremiumUpsellBannerText": "Microsoft Entra Kimlik Premium ile Bulut uygulamaları, Oturum açma riski ve Cihaz platformları gibi konularla ilgili kendi ilkelerinizi ve hedefe yönelik koşullar oluşturun",
- "policiesBladeTitle": "İlkeler",
- "policiesBladeTitleWithAppName": "İlkeler: {0}",
- "policiesDisabledBannerText": "Bağlı oturum açma özniteliğine sahip uygulamalarda ilke oluşturma ve düzenleme özelliği yasaklanmış.",
- "policiesHitMaxLimitStatusBarMessage": "Bu kiracı için en fazla ilke sayısına ulaştınız. Daha fazla oluşturmadan önce bazı ilkeleri silin.",
- "policyAssignmentsSection": "Atamalar",
- "policyBlockAllInfoBox": "Yapılandırılan ilke tüm kullanıcıları engelleyeceğinden desteklenmiyor. Atamaları ve denetimleri gözden geçirin. Bu ilkeyi kaydetmek istiyorsanız geçerli {0} kullanıcısını hariç tutun.",
- "policyCloudAppsDisplayTextAllApp": "Tüm uygulamalar",
- "policyCloudAppsLabel": "Bulut uygulamaları",
- "policyConditionClientAppDescription": "Kullanıcının bulut uygulamasına erişmek için kullandığı yazılım. Örneğin, 'Tarayıcı'",
- "policyConditionClientAppV2Description": "Kullanıcının bulut uygulamasına erişmek için kullandığı yazılım. Örneğin, 'Tarayıcı'",
- "policyConditionDevicePlatform": "Cihaz platformları",
- "policyConditionDevicePlatformDescription": "Kullanıcının oturum açtığı platform. Örneğin, 'iOS'",
- "policyConditionLocation": "Konumlar",
- "policyConditionLocationDescription": "Kullanıcının oturum açtığı konum (IP adresi aralığı kullanılarak belirlenir)",
- "policyConditionLocationPreview": "Konumlar (Önizleme)",
- "policyConditionSigninRisk": "Oturum açma riski",
- "policyConditionSigninRiskDescription": "Oturum açma eyleminin, hesabın kullanıcısı dışındaki biri tarafından gerçekleştirilme olasılığı. Risk düzeyi yüksek, orta veya düşük olabilir. Microsoft Entra Kimlik P2 lisansı gerektirir.",
- "policyConditionUserRisk": "Kullanıcı riski",
- "policyConditionUserRiskDescription": "İlkenin zorlanması için gereken kullanıcı risk düzeylerini yapılandırın",
- "policyConditioniClientApp": "İstemci uygulamaları",
- "policyControlAllowAccessDisplayedName": "Erişim izni ver",
- "policyControlAuthenticationStrengthDisplayedName": "Kimlik doğrulaması gücü gerektir (Önizleme)",
- "policyControlBladeTitle": "Erişim İzni Verme",
- "policyControlBlockAccessDisplayedName": "Erişimi engelle",
- "policyControlCompliantDeviceDisplayedName": "Cihazın uyumlu olarak işaretlenmesini gerektir",
- "policyControlContentDescription": "Erişimi engellemek veya erişim izni vermek için erişim zorlamasını denetleyin.",
- "policyControlInfoBallonText": "Erişimi engelleyin veya erişim izni vermek için karşılanması gereken ek gereksinimleri seçin",
- "policyControlMfaChallengeDisplayedName": "Çok faktörlü kimlik doğrulaması gerektir",
- "policyControlRequireCompliantAppDisplayedName": "Uygulama koruma ilkesi iste",
- "policyControlRequireDomainJoinedDisplayedName": "Microsoft Entra hibrite katılmış cihaz gerektir",
- "policyControlRequireMamDisplayedName": "Onaylı istemci uygulaması gerektir",
- "policyControlRequiredPasswordChangeDisplayedName": "Parola değişikliği iste",
- "policyControlSelectAuthStrength": "Kimlik doğrulaması gücü gerektir",
- "policyControlsNoControlsSelected": "0 denetim seçili",
- "policyControlsSection": "Erişim denetimleri",
- "policyCreatBladeTitle": "Yeni",
- "policyCreateButton": "Oluştur",
- "policyCreateFailedMessage": "Hata: {0}",
- "policyCreateFailedTitle": "'{0}' oluşturulamadı",
- "policyCreateInProgressTitle": "'{0}' oluşturuluyor",
- "policyCreateSuccessMessage": "'{0}' başarıyla oluşturuldu. \"İlkeyi etkinleştir\" seçeneğini \"Açık\" olarak ayarladıysanız ilke birkaç dakika içinde etkinleştirilecektir.",
- "policyCreateSuccessTitle": "'{0}' başarıyla oluşturuldu",
- "policyDeleteConfirmation": "'{0}' adlı ağı silmek istediğinizden emin misiniz? Bu eylem geri alınamaz.",
- "policyDeleteFailTitle": "'{0}' silinemedi",
- "policyDeleteInProgressTitle": "{0} siliniyor",
- "policyDeleteSuccessTitle": "'{0}' başarıyla silindi.",
- "policyEnforceLabel": "İlkeyi etkinleştir",
- "policyErrorCannotSetSigninRisk": "Oturum açma riski koşuluna sahip bir ilkeyi kaydetme izniniz yok.",
- "policyErrorNoPermission": "İlkeyi kaydetmek için izniniz yok. Genel yöneticinizle iletişime geçin.",
- "policyErrorUnknown": "Bir sorun oluştu, lütfen daha sonra yeniden deneyin.",
- "policyFallbackWarningMessage": "MS Graph kullanarak '{0}' ilkesini oluşturma veya güncelleştirme işlemi başarısız oluyor ve AD Graph’e geri dönme sonucu veriyor. Büyük olasılıkla MS Graph için uyumsuz bir koşulla ilke uç noktası çağrılırken hata oluştuğundan, lütfen aşağıdaki senaryoyu araştırın.",
- "policyFallbackWarningTitle": "'{0}' ilkesini oluşturma veya güncelleştirme işlemi kısmen başarılı oldu",
- "policyNameCannotBeEmpty": "İlke adı boş olamaz",
- "policyNameDevice": "Cihaz ilkesi",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Mobil Uygulama Yönetimi ilkesi",
- "policyNameMfaLocation": "Çok faktörlü kimlik doğrulaması ve konum ilkesi",
- "policyNamePlaceholderText": "Örnek: 'Cihaz uyumluluğu uygulama ilkesi'",
- "policyNameTooLongError": "İlke adı çok uzun. En fazla 256 karakter uzunluğunda olabilir",
- "policyOff": "Kapalı",
- "policyOn": "Açık",
- "policyReportOnly": "Yalnızca rapor",
- "policyReviewSection": "Gözden Geçir",
- "policySaveButton": "Kaydet",
- "policyStatusIconDescription": "İlke Etkin",
- "policyStatusIconEnabled": "Etkinleştirildi durum simgesi",
- "policyTemplateName1": "{0} tarayıcı erişiminde uygulama tarafından zorlanan kısıtlamalar kullan",
- "policyTemplateName2": "{0} erişimine yalnızca yönetilen cihazlarda izin ver",
- "policyTemplateName3": "Sürekli Erişim Değerlendirmesi ayarlarından geçirilen ilke",
- "policyTriggerRiskSpecific": "Özel risk düzeyi seçin",
- "policyTriggersInfoBalloonText": "İlkenin geçerli olacağı zamanı tanımlayan koşullar. Örneğin, 'konum'",
- "policyTriggersNoConditionsSelected": "0 koşul seçili",
- "policyTriggersSelectorLabel": "Koşullar",
- "policyUpdateFailedMessage": "Hata: {0}",
- "policyUpdateFailedTitle": "{0} güncelleştirilemedi",
- "policyUpdateInProgressTitle": "{0} güncelleştiriliyor",
- "policyUpdateSuccessMessage": "{0} başarıyla güncelleştirildi. \"İlkeyi etkinleştir\" seçeneğini \"Açık\" olarak ayarladıysanız ilke birkaç dakika içinde etkinleştirilecektir.",
- "policyUpdateSuccessTitle": "{0} başarıyla güncelleştirildi",
- "primaryCol": "Birincil",
- "privateLinkLabel": "Microsoft Entra Kimliği Özel Bağlantı",
- "reportOnlyInfoBox": "Yalnızca rapor modu: İlkeler oturum açma sırasında değerlendirilir ve kaydedilir ancak kullanıcıları etkilemez.",
- "requireAllControlsText": "Seçilen tüm denetimleri gerekli kıl",
- "requireCompliantDevice": "Uyumlu cihaz gerektir",
- "requireDomainJoined": "Etki alanına katılmış cihaz gerektir",
- "requireGrantReauth": "\"Her seferinde oturum açma sıklığı\" oturum denetimi, \"Tüm bulut uygulamaları\" seçildiğinde \"çok faktörlü kimlik doğrulaması gerektir\" veya \"parola değişikliği gerektir\" denetim izni gerektirir",
- "requireMFA": "Çok faktörlü kimlik doğrulaması gerektir",
- "requireMfaReauth": "\"Her seferinde oturum açma sıklığı\" oturum denetimi, \"oturum açma riski\" için \"çok faktörlü kimlik doğrulaması gerektir\" izin denetimini gerektirir",
- "requireOneControlText": "Seçilen denetimlerden birini gerekli kıl",
- "requirePasswordChangeReauth": "\"Her seferinde oturum açma sıklığı\" oturum denetimi \"kullanıcı riski\" için \"parola değişikliği gerektir\" izin denetimini gerektirir",
- "requireRiskReauth": "\"Tüm bulut uygulamaları\" seçildiğinde \"her seferinde oturum açma sıklığı\" oturum denetimi \"kullanıcı riski\" veya \"oturum açma riski\" oturum denetimini gerektirir.",
- "requireRiskReauthRiskNotEnabled": "\"Tüm bulut uygulamaları\" seçildiğinde \"her seferinde oturum açma sıklığı\" oturum denetimi kullanılamaz.",
- "requireRiskReauthSignInOnly": "\"Tüm bulut uygulamaları\" seçildiğinde \"her seferinde oturum açma sıklığı\" oturum denetimi, \"oturum açma riski\" oturum denetimini gerektirir.",
- "requireRiskReauthUserOnly": "\"Tüm bulut uygulamaları\" seçildiğinde \"her seferinde oturum açma sıklığı\" oturum denetimi, \"kullanıcı riski\" oturum denetimini gerektirir.",
- "resetFilters": "Filtreleri sıfırla",
- "sPRequired": "Hizmet sorumlusu gerekiyor",
- "sPSelectorInfoBalloon": "Sınamak istediğiniz Kullanıcı veya Hizmet Sorumlusu",
- "saturday": "Cumartesi",
- "searchTextTooLongError": "Arama metni çok uzun. En fazla 256 karakter",
- "securityDefaultsPolicyName": "Güvenlik varsayılanları",
- "securityDefaultsTextMessage": "Koşullu Erişim ilkesini etkinleştirmek için güvenlik varsayılanları devre dışı bırakılmalıdır.",
- "securityDefaultsUpdateInProgressText": "Bir güvenlik varsayılanları güncelleştirmesi devam ediyor, lütfen biraz bekleyin ve yeniden deneyin.",
- "securityDefaultsWarningMessage": "Kuruluşunuzun güvenlik yapılandırmalarını yönetmek üzeresiniz gibi görünüyor. Mükemmel! Bir Koşullu Erişim ilkesini etkinleştirmeden önce {0}güvenlik varsayılanlarını devre dışı bırakmanız{1} gerekir.",
- "selectDevicePlatforms": "Cihaz platformlarını seçin",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Konumları seç",
- "selectedSP": "Seçili Hizmet sorumlusu",
- "servicePrincipalBladeExcludedSelectorTitle": "Dışlanan hizmet sorumlularını seçin",
- "servicePrincipalBladeIncludedSelectorTitle": "Hizmet sorumlularını seçin",
- "servicePrincipalDataGridAria": "Kullanılabilir hizmet sorumlularının listesi",
- "servicePrincipalDropDownLabel": "Bu ilke nereye uygulanacak?",
- "servicePrincipalInfoBox": "İlke atamasındaki '{0}' seçimi nedeniyle bazı koşullar kullanılamıyor",
- "servicePrincipalRadioAll": "Sahip olunan tüm hizmet sorumluları",
- "servicePrincipalRadioSelect": "Hizmet sorumlularını seçin",
- "servicePrincipalSelectionsAria": "Seçili hizmet sorumluları kılavuzu",
- "servicePrincipalSelectorAria": "Seçilen hizmet sorumlularının listesi",
- "servicePrincipalSelectorMultiple": "{0} hizmet sorumlusu seçildi",
- "servicePrincipalSelectorSingle": "1 hizmet sorumlusu seçildi",
- "servicePrincipalSpecificExc": "Dışlanan belirli hizmet sorumluları",
- "servicePrincipalSpecificInc": "Eklenen belirli hizmet sorumluları",
- "servicePrincipals": "Hizmet sorumluları",
- "sessionControlBladeTitle": "Oturum",
- "sessionControlDescriptionContent": "Belirli bulut uygulamalarında sınırlı deneyimler sağlamak için erişimi oturum denetimlerini temel alarak denetleyin.",
- "sessionControlDisableInfo": "Bu denetim yalnızca desteklenen uygulamalarda kullanılabilir. Şu anda uygulama tarafından zorlanan kısıtlamaları destekleyen bulut uygulamaları yalnızca Office 365, Exchange Online ve SharePoint Online'dır. Daha fazla bilgi edinmek için buraya tıklayın.",
- "sessionControlInfoBallonText": "Oturum denetimleri, bulut uygulaması içinde sınırlı deneyim sağlar.",
- "sessionControls": "Oturum denetimleri",
- "sessionControlsAppEnforcedLabel": "Uygulama tarafından zorlanan kısıtlamaları kullan",
- "sessionControlsCasLabel": "Koşullu Erişim Uygulama Denetimi kullanın",
- "sessionControlsSecureSignInLabel": "Belirteç bağlaması gerektir",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} eklendi",
- "signinRiskReauth": "\"Çok faktörlü kimlik doğrulaması gerektir\" izni ve \"her seferinde oturum açma sıklığı\" oturum denetimi seçildiğinde \"Oturum açma riski\" koşulu seçilmelidir.",
- "signinRiskTriggerDescriptionContent": "Oturum açma risk düzeyini seçin",
- "singleTenantServicePrincipalInfoBallonText": "İlke yalnızca kuruluşunuza ait tek kiracılı hizmet sorumluları için geçerlidir. Daha fazla bilgi edinmek için buraya tıklayın ",
- "specificSigninRiskLevelsOption": "Belirli oturum açma risk düzeyleri seçin",
- "specificUsersExcluded": "belirli kullanıcılar hariç",
- "specificUsersIncluded": "Belirli kullanıcılar dahil",
- "specificUsersIncludedAndExcluded": "Dışarıda bırakılan ve dahil edilen belirli kullanıcılar",
- "startDatePickerLabel": "Başlangıç",
- "startFreeTrial": "Ücretsiz bir deneme başlatın",
- "startTimePickerLabel": "Başlangıç zamanı",
- "sunday": "Pazar",
- "testButton": "What If",
- "thumbprintCol": "Parmak İzi",
- "thursday": "Perşembe",
- "timeConditionAllTimesLabel": "Her zaman",
- "timeConditionIntroText": "Bu ilkenin uygulanacağı zamanı yapılandırın",
- "timeConditionSelectorInfoBallonContent": "Kullanıcı oturum açarken. Örneğin, \"Çarşamba 09:00-17:00 PST\"",
- "timeConditionSelectorLabel": "Zaman (Önizleme)",
- "timeConditionSpecificLabel": "Belirli saatler",
- "timeSelectorAllTimesText": "Her zaman",
- "timeSelectorSpecificTimesText": "Yapılandırılan belirli saatlerde",
- "timeZoneDropdownInfoBalloonContent": "Zaman aralığını tanımlayan bir saat dilimi seçin. Bu ilke, tüm saat dilimlerindeki kullanıcılar için geçerlidir. Örneğin, bir kullanıcı için 'Çarşamba 09:00 - 17:00' zaman aralığı, farklı bir saat dilimindeki bir kullanıcı için 'Çarşamba 10:00 - 18:00' olur.",
- "timeZoneDropdownLabel": "Saat dilimi",
- "timeZoneDropdownPlaceholderText": "Saat dilimi seçin",
- "tooManyPoliciesDescription": "Şu anda yalnızca ilk 50 ilke görüntüleniyor, tüm ilkeleri görüntülemek için buraya tıklayın",
- "tooManyPoliciesTitle": "50'den fazla ilke bulundu",
- "trustedLocationStatusIconDescription": "Konuma güveniliyor",
- "trustedLocationStatusIconEnabled": "Güvenilen durum simgesi",
- "tuesday": "Salı",
- "uploadInBadState": "Belirtilen dosya karşıya yüklenemiyor.",
- "upsellAppsDescription": "Hassas uygulamalar için her zaman veya yalnızca şirket ağının dışından erişim sağlandığı durumlarda çok faktörlü kimlik doğrulaması gerektirin.",
- "upsellAppsTitle": "Uygulamaları güvenli hale getirin",
- "upsellBannerText": "Bu özelliği kullanmak için ücretsiz bir Premium deneme sürümü edinin",
- "upsellDataDescription": "Şirket kaynaklarına erişim izni vermek için, cihazın uyumlu olarak işaretlenmesini veya Microsoft Entra hibrite katılmayı zorunlu kılın.",
- "upsellDataTitle": "Verileri güvenli hale getirin",
- "upsellDescription": "Koşullu Erişim sayesinde, kullanıcılarınıza tüm cihazlardan en iyi şekilde çalışma olanağı sağlarken aynı zamanda kurumsal verilerinizi güvende tutmanız için gereken denetim ve korumaya sahip olursunuz. Örneğin, şirket ağı dışından gerçekleştirilen ya da uyumluluk ilkelerini karşılayan cihazlara yönelik erişimi engelleyebilirsiniz.",
- "upsellRiskDescription": "Microsoft’un makine öğrenmesi sistemi tarafından algılanan risk olayları için çok faktörlü kimlik doğrulaması gerektirin.",
- "upsellRiskTitle": "Riske karşı koruma sağlayın",
- "upsellTitle": "Koşullu Erişim",
- "upsellWhyTitle": "Koşullu Erişim neden kullanılmalıdır?",
- "userAppNoneOption": "Yok",
- "userNamePlaceholderText": "Kullanıcı Adını Girin",
- "userNotSetSeletorLabel": "0 kullanıcı ve grup seçili",
- "userOnlySelectionBladeExcludeDescription": "İlkenin dışında tutulacak kullanıcıları seçin",
- "userOrGroupSelectionCountDiffBannerText": "Bu ilkede yapılandırılan {0} dizinden silinmiş ancak bu durum, ilkedeki diğer kullanıcıları ve grupları etkilemiyor. Bir sonraki ilke güncelleştirmenizde, silinen kullanıcılar ve/veya gruplar otomatik olarak kaldırılır.",
- "userOrSPNotSetSelectorLabel": "0 kullanıcı veya iş yükü kimliği seçildi",
- "userOrSPSelectionBladeTitle": "Kullanıcılar veya iş yükü kimlikleri",
- "userOrSPSelectorInfoBallonText": "Kullanıcılar, gruplar ve hizmet sorumluları dahil olmak üzere, ilkenin uygulandığı dizindeki kimlikler",
- "userRequired": "Kullanıcı Gerekli",
- "userRiskErrorBox": "\"Parola değişikliği iste\" izni seçildiğinde \"Kullanıcı riski\" koşulu seçilmelidir",
- "userRiskReauth": "\"Parola değişikliği gerektir\" izni ve \"Her seferinde oturum açma sıklığı\" oturum denetimi seçildiğinde \"Oturum açma riski\" yerine \"Kullanıcı riski\" koşulu seçilmelidir",
- "userSPRequired": "Kullanıcı veya Hizmet sorumlusu gerekiyor",
- "userSPSelectorTitle": "Kullanıcı veya İş yükü kimliği",
- "userSelectionBladeAllUsersAndGroups": "Tüm kullanıcılar ve gruplar",
- "userSelectionBladeExcludeDescription": "İlkenin dışında tutulacak kullanıcıları ve grupları seçin",
- "userSelectionBladeExcludeTabTitle": "Dışla",
- "userSelectionBladeExcludedSelectorTitle": "Dışta tutulan kullanıcı ve grupları seçin",
- "userSelectionBladeIncludeDescription": "Bu ilkenin uygulanacağı kullanıcıları seçin",
- "userSelectionBladeIncludeTabTitle": "Ekle",
- "userSelectionBladeIncludedSelectorTitle": "Seç",
- "userSelectionBladeSelectUsers": "Kullanıcıları seçin",
- "userSelectionBladeSelectedUsers": "Kullanıcı ve grupları seçin",
- "userSelectionBladeTitle": "Kullanıcılar ve gruplar",
- "userSelectorBladeTitle": "Kullanıcılar",
- "userSelectorExcluded": "{0} dışarıda bırakıldı",
- "userSelectorGroupPlural": "{0} grup",
- "userSelectorGroupSingular": "1 grup",
- "userSelectorIncluded": "{0} eklendi",
- "userSelectorInfoBallonText": "İlkenin uygulandığı dizindeki kullanıcılar ve gruplar. Örneğin, 'Pilot grup'",
- "userSelectorSelected": "{0} seçildi",
- "userSelectorTitle": "Kullanıcı",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} kullanıcı",
- "userSelectorUserSingular": "1 kullanıcı",
- "userSelectorWithExclusion": "{0} ve {1}",
- "usersGroupsLabel": "Kullanıcılar ve gruplar",
- "viewApprovedAppsText": "Onaylı istemci uygulamalarının listesini görün",
- "viewCompliantAppsText": "İlke korumalı istemci uygulamalarının listesini görün",
- "viewPolicyInformation": "İlke bilgilerini görüntüle",
- "vpnBladeTitle": "VPN bağlantısı",
- "vpnCertCreateFailedMessage": "Hata: {0}",
- "vpnCertCreateFailedTitle": "{0} oluşturulamadı",
- "vpnCertCreateInProgressTitle": "{0} oluşturuluyor",
- "vpnCertCreateSuccessMessage": "{0} başarıyla oluşturuldu.",
- "vpnCertCreateSuccessTitle": "{0} başarıyla oluşturuldu",
- "vpnCertNoRowsMessage": "VPN sertifikası bulunamadı",
- "vpnCertUpdateFailedMessage": "Hata: {0}",
- "vpnCertUpdateFailedTitle": "{0} güncelleştirilemedi",
- "vpnCertUpdateInProgressTitle": "{0} güncelleştiriliyor",
- "vpnCertUpdateSuccessMessage": "{0} başarıyla güncelleştirildi.",
- "vpnCertUpdateSuccessTitle": "{0} başarıyla güncelleştirildi",
- "vpnFeatureInfo": "VPN bağlantısı ve Koşullu Erişim hakkında daha fazla bilgi için buraya tıklayın.",
- "vpnFeatureWarning": "Portalda bir VPN sertifikası oluşturulduğunda Microsoft Entra Kimlik, VPN istemcisine kısa süreli sertifikalar vermek için bunu hemen kullanmaya başlar. VPN istemcisinin kimlik doğrulamasıyla ilgili sorunları önlemek için VPN sertifikasının VPN sunucusuna hızla dağıtılması önemlidir.",
- "vpnMenuText": "VPN bağlantısı",
- "vpncertDropdownDefaultOption": "Süre",
- "vpncertDropdownInfoBalloonContent": "Oluşturmak istediğiniz sertifikanın süresini seçin",
- "vpncertDropdownLabel": "Süre seçin",
- "vpncertDropdownOneyearOption": "1 yıl",
- "vpncertDropdownThreeyearOption": "3 yıl",
- "vpncertDropdownTwoyearOption": "2 yıl",
- "wednesday": "Çarşamba",
- "whatIfCountry": "Ülke/Bölge",
- "whatIfCountryInfo": "Kullanıcının oturum açtığı ülke/bölge.",
- "whatIfDevicePlatformInfo": "Kullanıcının oturum açmak için kullandığı cihaz platformu.",
- "whatIfEnterIpAddress": "IP adresi girin (ör: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "Geçersiz IP adresi belirtildi.",
- "whatIfIpAddress": "IP adresi",
- "whatIfIpAddressInfo": "Kullanıcının oturum açtığı konumun IP adresi.",
- "whatIfIpCountryInfoBoxText": "IP adresi veya Ülke/Bölge kullanıyorsanız, her iki alan gereklidir ve birlikte doğru eşlenmelidir.",
- "whatIfSelectCountry": "Ülke/bölge seçin...",
- "whatIfSelectDevicePlatform": "Cihaz platformunu seçin...",
- "whatIfSelectPrivateLink": "Özel bağlantı seçin...",
- "whatIfSelectSignInRisk": "Oturum açma riskini seçin...",
- "whatIfSignInRisk": "Oturum açma riski",
- "whatIfSignInRiskInfo": "Oturum açma ile ilişkili risk düzeyi",
- "whatIfUnknownAreas": "Bilinmeyen Alanlar",
- "windows365InfoBox": "Windows 365’in seçilmesi Bulut PC’lere ve Azure Sanal Masaüstü oturumu ana bilgisayarlarına bağlantıları etkiler. Daha fazla bilgi edinmek için buraya tıklayın.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "İş yükü kimlikleri (önizleme)",
- "workloadIdentitiesLicenseText": "Bu ilkeyi düzenlemek için iş yükü kimlikleri premium P1 veya P2 lisansı gereklidir.",
- "workloadIdentity": "İş yükü kimliği"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Desteklenmiyor",
- "supportEnding": "Destek sonu",
- "supported": "Destekleniyor"
- }
- },
- "SecurityTemplate": {
- "aSR": "Saldırı yüzeyini azaltma",
- "accountProtection": "Hesap koruması",
- "allDevices": "Tüm cihazlar",
- "antivirus": "Virüsten Koruma",
- "antivirusReporting": "Virüsten Koruma Raporlaması (Önizleme)",
- "conditionalAccess": "Koşullu erişim",
- "deviceCompliance": "Cihaz uyumluluğu",
- "diskEncryption": "Disk şifrelemesi",
- "eDR": "Uç nokta algılama ve yanıt",
- "ePM": "Uç Nokta Ayrıcalık Yönetimi",
- "firewall": "Güvenlik duvarı",
- "helpSupport": "Yardım ve destek",
- "setup": "Kur",
- "wdapt": "Uç Nokta için Microsoft Defender"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Başarısız",
- "hardReboot": "Donanımdan önyükleme",
- "retry": "Yeniden Dene",
- "softReboot": "Yazılımdan önyükleme",
- "success": "Başarılı"
- },
- "Columns": {
- "codeType": "Kod türü",
- "returnCode": "Dönüş kodu"
- },
- "bladeTitle": "Dönüş kodları",
- "gridAriaLabel": "Dönüş kodları",
- "header": "Yükleme sonrası davranışını göstermek için dönüş kodları belirtin:",
- "onAddAnnounceMessage": "Dönüş kodu {1} öğeden {0} tanesini ekledi",
- "onDeleteSuccess": "{0} dönüş kodu başarıyla silindi",
- "returnCodeAlreadyUsedValidation": "Dönüş kodu zaten kullanılıyor.",
- "returnCodeMustBeIntegerValidation": "Dönüş kodu tamsayı olmalıdır.",
- "returnCodeShouldBeAtLeast": "Dönüş kodu en az {0} olmalıdır.",
- "returnCodeShouldBeAtMost": "Dönüş kodu en çok {0} olmalıdır.",
- "selectorLabel": "Dönüş kodları"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arapça",
- "bulgarian": "Bulgarca",
- "chineseSimplified": "Çince (Basitleştirilmiş)",
- "chineseTraditional": "Çince (Geleneksel)",
- "croatian": "Hırvatça",
- "czech": "Çekçe",
- "danish": "Danca",
- "dutch": "Felemenkçe",
- "englishUK": "İngilizce (Birleşik Krallık)",
- "englishUS": "İngilizce (Birleşik Devletler)",
- "estonian": "Estonca",
- "finnish": "Fince",
- "frenchCanada": "Fransızca (Kanada)",
- "frenchFrance": "Fransızca (Fransa)",
- "german": "Almanca",
- "greek": "Yunanca",
- "hebrew": "İbranice",
- "hungarian": "Macarca",
- "italian": "İtalyanca",
- "japanese": "Japonca",
- "korean": "Korece",
- "latvian": "Letonca",
- "lithuanian": "Litvanca",
- "norwegian": "Norveççe Bokmål",
- "polish": "Lehçe",
- "portugueseBrazil": "Portekizce (Brezilya)",
- "portuguesePortugal": "Portekizce (Portekiz)",
- "romanian": "Romence",
- "russian": "Rusça",
- "serbian": "Sırpça",
- "slovak": "Slovakça",
- "slovenian": "Slovence",
- "spanishMexico": "İspanyolca (Meksika)",
- "spanishSpain": "İspanyolca (İspanya)",
- "swedish": "İsveççe",
- "thai": "Tayland",
- "turkish": "Türkçe",
- "ukrainian": "Ukraynaca"
- },
- "Summary": {
- "placeholder": "Sol taraftaki önizleme içeriğinden bir bildirim iletisi seçin."
- },
- "companyContact": "İletişim bilgilerini göster",
- "companyLogo": "Şirket logosunu göster",
- "companyName": "Şirket adını göster",
- "createEditDescription": "Bildirim iletisi şablonları oluşturun veya düzenleyin.",
- "createMessage": "İleti oluştur",
- "deviceDetails": "Cihaz ayrıntılarını göster",
- "deviceDetailsInfoBox": "Cihaz ayrıntılarını almak e-posta bildirimlerini almada gecikmeye neden olduğundan bu ayar varsayılan olarak kapalıdır.",
- "editImpactInfo": "Bu bildirim iletisi şablonunu düzenlemek, bu şablonu kullanan tüm ilkeleri etkiler.",
- "editMessage": "İletiyi düzenle",
- "email": "e-posta",
- "emailFooterTitle": "E-posta Alt Bilgisi",
- "emailHeaderFooterInfo": "E-posta bildirimleri için e-posta üst bilgi ve alt bilgi ayarları, Uç Nokta yöneticisinde bulunan Kiracı yönetici düğümündeki Özelleştirme ayarlarına bağlıdır.",
- "emailHeaderTitle": "Posta Üst Bilgisi",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Özelleştirme ayarlarını yapılandırın",
- "formSubTitle": "Bildirim e-postaları oluşturma veya düzenleme",
- "headerFooterSettingsTab": "Üst bilgi ve alt bilgi ayarları",
- "imgPreview": "Görüntü Önizleme",
- "infotext": "Bir bildirim iletisi seçin. Yeni bir bildirim oluşturmak için lütfen Cihaz Uyumluluğunu Ayarla iş yükünün Yönetim bölümündeki Bildirim'e gidin.",
- "iwLink": "Şirket portalı web sitesi bağlantısını göster",
- "listEmpty": "İleti şablonu yok.",
- "listEmptySelectOnly": "İleti şablonu yok. Yeni bir bildirim oluşturmak için, lütfen Cihaz Uyumluluğu Ayarla iş yükünün Yönet bölümündeki Bildirimler bölümünü ziyaret edin.",
- "listSubTitle": "Bildirim iletisi şablonları listesi",
- "listTitle": "Bildirim iletisi şablonları",
- "localizedNotificationMessageTemplates": "Yerelleştirilmiş bildirim iletisi şablonları",
- "messageAssigned": "Bu ileti şablonu, şu anda bir veya daha çok uyumluluk ilkesi tarafından kullanıldığından silinemiyor.",
- "messageCapitalized": "Bildirim iletisi şablonu",
- "messageLowercase": "bildirim iletisi şablonu",
- "missingDefaultError": "Varsayılan bir şablon seçin",
- "notificationMessageTemplates": "Bildirim iletisi şablonları",
- "rowValidationError": "En az bir ileti şablonu gerekiyor",
- "selectDescription": "Bir bildirim iletisi seçin. Yeni bir bildirim oluşturmak için, lütfen Cihaz Uyumluluğunu Ayarla iş yükünün Yönetim bölümündeki Bildirimler'e gidin.",
- "tenantValueText": "Kiracı Değeri",
- "testEmailLabel": "Önizleme e-postası gönder",
- "localeLabel": "Yerel ayar",
- "isDefaultLocale": "Varsayılan Değer"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Yeniden başlatma zorlanmadan önce beklenecek gün sayısı"
- },
"Description": {
"label": "Açıklama"
},
+ "FeatureDeploymentSettings": {
+ "header": "Özellik dağıtımı ayarları"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "Bu özellik bir cihazın sürümünü düşüremez.",
+ "label": "Dağıtılacak özellik güncelleştirmesi"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Son grup kullanılabilirliği"
+ },
+ "GradualRolloutInterval": {
+ "label": "Gruplar arasındaki gün sayısı"
+ },
+ "GradualRolloutStartDate": {
+ "label": "İlk grup kullanılabilirliği"
+ },
"Name": {
"label": "Ad"
},
- "QualityUpdateRelease": {
- "label": "Cihaz işletim sistemi sürümü şundan düşükse kalite güncelleştirmeleri yüklemesini hızlandır:"
- },
- "bladeTitle": "Kalite güncelleştirmeleri Windows 10 ve sonrası (önizleme)",
- "loadError": "Yüklenemedi!"
+ "OptionalUpdate": {
+ "label": "Gerekli veya isteğe bağlı güncelleştirme"
+ },
+ "RolloutOptions": {
+ "label": "Piyasaya çıkma seçenekleri"
+ },
+ "RolloutSettings": {
+ "header": "Güncelleştirmeyi Windows Update’te ne zaman kullanıma sunmak istersiniz?"
+ },
+ "ScopeSettings": {
+ "header": "Bu ilke için kapsam etiketlerini yapılandırın."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "İlk kullanıma sunma tarihi"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Devre dışı",
+ "enabled": "Etkin",
+ "infoBalloonContent": "En son Windows 10 özellik güncelleştirmesinin Windows 11 için uygun olmayan cihazlara yüklenip yüklenemeyeceğini denetleyin",
+ "label": "Bir cihaz Windows 11'i çalıştırmaya uygun değilse en son Windows 10 özellik güncelleştirmesini çalıştırın",
+ "notApplicable": "Uygulanamaz",
+ "summaryLabel": "Windows 11 çalıştırmaya uygun olmayan cihazlara Windows 10 yükleyin"
+ },
+ "bladeTitle": "Özellik güncelleştirmesi dağıtımları",
+ "deploymentSettingsTitle": "Dağıtım ayarları",
+ "loadError": "Profil yükleme başarısız oldu!",
+ "windows11EULA": "Dağıtılacak Özellik güncelleştirmesini seçerek, bu işletim sistemini bir cihaza uygularken (1) geçerli Windows lisansının toplu lisanslama yoluyla satın alındığını veya (2) kuruluşunuzu bağlama yetkisine sahip olduğunuzu ve burada bulabileceğiniz ilgili Microsoft Yazılımı Lisans Koşulları’nı kuruluş adına kabul ettiğinizi onaylamış oluyorsunuz: {0}."
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\" kaydedildi.",
+ "newFeatureUpdateDeploymentCreated": "Yeni özellik güncelleştirme dağıtımı oluşturuldu."
+ },
"TabName": {
- "qualityUpdateSettings": "Ayarlar"
+ "deploymentSettings": "Dağıtım ayarları",
+ "groupAssignmentSettings": "Atamalar",
+ "scopeSettings": "Kapsam etiketleri"
},
- "infoBoxText": "Windows 10 ve sonrası için mevcut güncelleştirme kademeleri ilkesi dışında şu anda kullanılabilir tek ayrılmış kalite güncelleştirmesi denetimi, belirtilen yama seviyesinin gerisinde kalan cihazlar için kalite güncelleştirmelerini hızlandırabilir. Gelecekte ek denetimler kullanıma sunulacaktır.",
- "licenseLearnMoreText": "Önkoşullar ve kalite güncelleştirmesi ilkeleri hakkında daha fazla bilgi edinin.",
- "licenseWarningBoxText": "Kalite güncelleştirmesi ilkeleri oluşturmak belirli lisanslar gerektirir.",
- "warningBoxText": "Yazılım güncelleştirmelerinin hızlandırılması, gerektiğinde uyumluluğa ulaşma süresinin kısaltılmasına yardımcı olabilir ve son kullanıcı üretkenliği üzerinde daha büyük bir etkiye sahiptir. Mesai saatleri içinde yeniden başlatma deneyimi yaşama olasılıkları önemli ölçüde artar."
+ "gradualRolloutLicenseWarning": "Bu yetenek belirli lisanslar gerektirir.",
+ "gradualRolloutLicenseWarningEdit": "İlke bu özellik seçilmeden kaydedilene kadar bu özellik kullanılmaya ve yapılandırılmaya devam eder.",
+ "licenseLearnMoreText": "Önkoşullar ve özellik güncelleştirmesi ilkeleri hakkında daha fazla bilgi edinin.",
+ "optionalUpdateWarning": "İsteğe bağlı seçeneği yalnızca Windows 11 güncelleştirmeleri için kullanılabilir",
+ "profileNameWarning": "Ad 64 karakterden kısa olmalıdır",
+ "specificLicensingRequired": "Seçilen bazı özellikler belirli lisans gerektirir."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64 bit",
- "thirtyTwoBit": "32 bit"
- },
- "TACSettings": {
- "edgeSettings": "Edge yapılandırma ayarları",
- "edgeWindowsDataProtectionSettings": "Edge (Windows) veri koruma ayarları - Önizleme",
- "edgeWindowsSettings": "Edge (Windows) yapılandırma ayarları - Önizleme",
- "generalAppConfig": "Genel uygulama yapılandırması",
- "generalSettings": "Genel yapılandırma ayarları",
- "outlookSMIMEConfig": "Outlook S/MIME ayarları",
- "outlookSettings": "Outlook yapılandırma ayarları",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Ağ sınırı ekle",
- "addNetworkBoundaryButton": "Ağ sınırı ekle...",
- "allowWindowsSearch": "Şifrelenen kurumsal verilerin ve Mağaza uygulamalarının Windows Search tarafından aranmasına izin ver",
- "authoritativeIpRanges": "Kurumsal IP Aralıkları listesi yetkilendirildi (otomatik olarak algılama)",
- "authoritativeProxyServers": "Kurumsal Proxy Sunucular listesi yetkilendirildi (otomatik olarak algılama)",
- "boundaryType": "Sınır türü",
- "cloudResources": "Bulut kaynakları",
- "corporateIdentity": "Kurumsal kimlik",
- "dataRecoveryCert": "Şifrelenmiş verilerin kurtarılmasını sağlamak için Veri Kurtarma Aracısı (DRA) sertifikasını karşıya yükle",
- "editNetworkBoundary": "Ağ sınırını düzenle",
- "enrollmentState": "Kayıt durumu",
- "iPv4Ranges": "IPv4 aralıkları",
- "iPv6Ranges": "IPv6 aralıkları",
- "internalProxyServers": "İç proxy sunucular",
- "maxInactivityTime": "Cihazın PIN'inin veya parolasının kilitlenmesine neden olan izin verilen en uzun boşta kalma süresi (dakika cinsinden)",
- "maxPasswordAttempts": "Cihaz silinmeden önce izin verilen kimlik doğrulama hatası sayısı",
- "mdmDiscoveryUrl": "MDM bulma URL'si",
- "mdmRequiredSettingsInfo": "Bu ilke yalnızca Windows 10 Yıldönümü Sürümü ve üzeri için geçerlidir. Bu ilke, korumayı uygulamak için Windows Bilgi Koruması (WIP) kullanır.",
- "minimumPinLength": "PIN için gerekli en az karakter sayısını ayarla",
- "name": "Ad",
- "networkBoundariesGridEmptyText": "Eklediğiniz ağ sınırları burada gösterilir",
- "networkBoundary": "Ağ sınırı",
- "networkDomainNames": "Ağ etki alanları",
- "neutralResources": "Bağımsız kaynaklar",
- "passportForWork": "Windows'ta oturum açma yöntemi olarak İş İçin Windows Hello kullan",
- "pinExpiration": "Sistem kullanıcıdan değiştirmesini isteyene kadar PIN'in kullanılabileceği süreyi belirtin (gün olarak)",
- "pinHistory": "Tekrar kullanılamayan bir kullanıcı hesabı ile ilişkili eski PIN'lerin sayısını belirtin",
- "pinLowercaseLetters": "İş İçin Windows Hello PIN'inde küçük harf kullanımını yapılandır",
- "pinSpecialCharacters": "İş İçin Windows Hello PIN'inde özel karakter kullanımını yapılandır",
- "pinUppercaseLetters": "İş İçin Windows Hello PIN'inde büyük harf kullanımını yapılandır",
- "protectUnderLock": "Cihaz kilitliyken uygulamaların kurumsal verilere erişmesini engelleyin. Yalnızca Windows 10 Mobile için geçerlidir",
- "protectedDomainNames": "Korunan etki alanları",
- "proxyServers": "Proxy sunucuları",
- "requireAppPin": "Cihaz PIN'i yönetildiğinde uygulama PIN'ini devre dışı bırakma",
- "requiredSettings": "Gerekli ayarlar",
- "requiredSettingsInfo": "Kapsamı değiştirmek veya bu ilkeyi kaldırmak kurumsal verilerin şifresini çözer.",
- "revokeOnMdmHandoff": "Cihaz MDM'ye kaydedildiğinde korumalı verilere erişimi iptal edin",
- "revokeOnUnenroll": "Kayıt kaldırılırken şifreleme anahtarlarını iptal et",
- "rmsTemplateForEdp": "Azure RMS için kullanılacak şablon kimliğini belirt",
- "showWipIcon": "Kurumsal verileri koruma simgesini göster",
- "type": "Tür",
- "useRmsForWip": "WIP için Azure RMS kullan",
- "value": "Değer",
- "weRequiredSettingsInfo": "Bu ilke yalnızca Windows 10 Creators Update ve üzeri için geçerlidir. Bu ilke, korumayı uygulamak için Windows Bilgi Koruması (WIP) ve Windows MAM kullanır.",
- "wipProtectionMode": "Windows Bilgi Koruması modu",
- "withEnrollment": "Kayıt ile",
- "withoutEnrollment": "Kayıt olmadan"
+ "Platform": {
+ "all": "Tümü",
+ "android": "Android cihaz yöneticisi",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "Ortak",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS ve Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Bilinmeyen",
+ "unsupported": "Desteklenmiyor",
+ "windows": "Windows",
+ "windows10": "Windows 10 ve sonraki sürümler",
+ "windows10CM": "Windows 10 ve üzeri sürümler (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 ve sonraki sürümler",
+ "windows8And10": "Windows 8 ve 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 ve sonraki sürümler",
+ "windows10AndWindowsServer": "Windows 10, Windows 11 ve Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 ve üzeri sürümler (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows Kişisel Bilgisayarı"
+ },
+ "InstallIntent": {
+ "available": "Kayıtlı cihazlar için bulunur",
+ "availableWithoutEnrollment": "Kayıtlı veya kayıtsız olarak kullanılabilir",
+ "required": "Gerekli",
+ "uninstall": "Kaldır"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filtre",
+ "noFilters": "Yok"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Yazar",
- "template": "Şablon adı"
- },
- "Row": {
- "ariaLabel": "sütun {2} satır {0} / {1}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Baştan başlayın ve kullanılabilir envanter özellikleri kitaplığından istediğiniz özellikleri seçin"
- },
- "SettingsCatalog": {
- "subtitle": "Baştan başlayın ve kullanılabilir ayarlar kitaplığından istediğiniz ayarları seçin",
- "title": "Ayarlar kataloğu"
- },
- "Templates": {
- "subtitle": "Şablonlar, işlevlere göre düzenlenmiş ayar grupları içerir. İlkeleri kendiniz oluşturmak istemiyorsanız veya cihazları WiFi ya da VPN gibi şirket ağlarına erişmek üzere yapılandırmak istiyorsanız şablon kullanın.",
- "title": "Şablonlar"
- },
- "noData": "İlke şablonu bulunamadı"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Proje Çevrimiçi Masaüstü İstemcisi",
- "visioProRetail": "Visio Çevrimiçi Plan 2"
- },
- "Countries": {
- "ae": "Birleşik Arap Emirlikleri",
- "ag": "Antigua ve Barbuda",
- "ai": "Anguilla",
- "al": "Arnavutluk",
- "am": "Ermenistan",
- "ao": "Angola",
- "ar": "Arjantin",
- "at": "Avusturya",
- "au": "Avustralya",
- "az": "Azerbaycan",
- "bb": "Barbados",
- "be": "Belçika",
- "bf": "Burkina Faso",
- "bg": "Bulgaristan",
- "bh": "Bahreyn",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolivya",
- "br": "Brezilya",
- "bs": "Bahamalar",
- "bt": "Bhutan",
- "bw": "Botsvana",
- "by": "Belarus",
- "bz": "Belize",
- "ca": "Kanada",
- "cg": "Kongo Cumhuriyeti",
- "ch": "İsviçre",
- "cl": "Şili",
- "cn": "Çin",
- "co": "Kolombiya",
- "cr": "Kosta Rika",
- "cv": "Cabo Verde",
- "cy": "Kıbrıs",
- "cz": "Çek Cumhuriyeti",
- "de": "Almanya",
- "dk": "Danimarka",
- "dm": "Dominika",
- "do": "Dominik Cumhuriyeti",
- "dz": "Cezayir",
- "ec": "Ekvador",
- "ee": "Estonya",
- "eg": "Mısır",
- "es": "İspanya",
- "fi": "Finlandiya",
- "fj": "Fiji",
- "fm": "Mikronezya Federe Devletleri",
- "fr": "Fransa",
- "gb": "Birleşik Krallık",
- "gd": "Grenada",
- "gh": "Gana",
- "gm": "Gambiya",
- "gr": "Yunanistan",
- "gt": "Guatemala",
- "gw": "Gine-Bissau",
- "gy": "Guyana",
- "hk": "Hong Kong",
- "hn": "Honduras",
- "hr": "Hırvatistan",
- "hu": "Macaristan",
- "id": "Endonezya",
- "ie": "İrlanda",
- "il": "İsrail",
- "in": "Hindistan",
- "is": "İzlanda",
- "it": "İtalya",
- "jm": "Jamaika",
- "jo": "Ürdün",
- "jp": "Japonya",
- "ke": "Kenya",
- "kg": "Kırgızistan",
- "kh": "Kamboçya",
- "kn": "St. Kitts ve Nevis",
- "kr": "Kore Cumhuriyeti",
- "kw": "Kuveyt",
- "ky": "Cayman Adaları",
- "kz": "Kazakistan",
- "la": "Laos Demokratik Halk Cumhuriyeti",
- "lb": "Lübnan",
- "lc": "St. Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberya",
- "lt": "Litvanya",
- "lu": "Lüksemburg",
- "lv": "Letonya",
- "md": "Moldova Cumhuriyeti",
- "mg": "Madagaskar",
- "mk": "Kuzey Makedonya",
- "ml": "Mali",
- "mn": "Moğolistan",
- "mo": "Makao",
- "mr": "Moritanya",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malavi",
- "mx": "Meksika",
- "my": "Malezya",
- "mz": "Mozambik",
- "na": "Namibia",
- "ne": "Nijer",
- "ng": "Nijerya",
- "ni": "Nikaragua",
- "nl": "Hollanda",
- "no": "Norveç",
- "np": "Nepal",
- "nz": "Yeni Zelanda",
- "om": "Umman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua Yeni Gine",
- "ph": "Filipinler",
- "pk": "Pakistan",
- "pl": "Polonya",
- "pt": "Portekiz",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Katar",
- "ro": "Romanya",
- "ru": "Rusya",
- "sa": "Suudi Arabistan",
- "sb": "Solomon Adaları",
- "sc": "Seyşeller",
- "se": "İsveç",
- "sg": "Singapur",
- "si": "Slovenya",
- "sk": "Slovakya",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Surinam",
- "st": "Sao Tome ve Principe",
- "sv": "El Salvador",
- "sz": "Svaziland",
- "tc": "Turks ve Caicos",
- "td": "Çad",
- "th": "Tayland",
- "tj": "Tacikistan",
- "tm": "Türkmenistan",
- "tn": "Tunus",
- "tr": "Türkiye",
- "tt": "Trinidad ve Tobago",
- "tw": "Tayvan",
- "tz": "Tanzanya",
- "ua": "Ukrayna",
- "ug": "Uganda",
- "us": "Amerika Birleşik Devletleri",
- "uy": "Uruguay",
- "uz": "Özbekistan",
- "vc": "St. Vincent ve Grenadinler",
- "ve": "Venezuela",
- "vg": "İngiliz Virgin Adaları",
- "vn": "Vietnam",
- "ye": "Yemen",
- "za": "Güney Afrika",
- "zw": "Zimbabve"
- },
- "OfficeUpdateChannel": {
- "current": "Geçerli Kanal",
- "deferred": "Altı Aylık Kurumsal Kanal",
- "firstReleaseCurrent": "Geçerli Kanal (Önizleme)",
- "firstReleaseDeferred": "Yarı Yıllık Kurumsal Kanal (Önizleme)",
- "monthlyEnterprise": "Aylık Kurumsal Kanal",
- "placeHolder": "Birini seçin"
- },
- "AppProtection": {
- "allAppTypes": "Tüm uygulama türlerini hedefle",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Android İş Profilindeki Uygulamalar",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Microsoft Entra Paylaşılan Moduna Sahip Android Enterprise Ayrılmış Cihazlarındaki Uygulamalar",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Android Açık Kaynak Projesi Kullanıcı İlişkili Uygulamalar",
- "appsOnAndroidOpenSourceProjectUserless": "Android Açık Kaynak Projesindeki Uygulamalar Kullanıcısız",
- "appsOnIntuneManagedDevices": "Intune yönetilen cihazlardaki uygulamalar",
- "appsOnUnmanagedDevices": "Yönetilmeyen cihazlardaki uygulamalar",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Kullanılamaz",
- "windows10PlatformLabel": "Windows 10 ve sonraki sürümler",
- "withEnrollment": "Kayıt ile",
- "withoutEnrollment": "Kayıt olmadan"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Yerleşik Rol",
- "customCloudPCRole": "Özel Windows 365 rolü",
- "customIntuneRole": "Özel Intune rolü",
- "customRole": "Özel Rol"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} bir veya daha fazla ilke kümesine eklenmiş. {0} öğesini silerseniz, bu öğeyi artık bu ilke kümeleri aracılığıyla atayamazsınız. Yine de silinsin mi?",
- "contentWithError": "{0} bir veya daha fazla ilke kümesine eklenmiş olabilir. {0} öğesini silerseniz, bu öğeyi artık bu ilke kümeleri aracılığıyla atayamazsınız. Yine de silinsin mi?",
- "header": "Bu kısıtlamayı silmek istediğinizden emin misiniz?"
- },
- "DeviceLimit": {
- "description": "Bir kullanıcının kaydedebileceği en fazla cihaz sayısını belirtin.",
- "header": "Cihaz sınırı kısıtlamaları",
- "info": "Her kullanıcının kaç cihaz kaydedebileceğini tanımlayın."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "1.0 veya üzeri olmalıdır.",
- "android": "Geçerli bir sürüm numarası girin. Örnekler: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Geçerli bir sürüm numarası girin. Örnekler: 5.0, 5.1.1",
- "iOS": "Geçerli bir sürüm numarası girin. Örnekler: 9.0, 10.0, 9.0.2",
- "mac": "Geçerli bir sürüm numarası girin. Örnekler: 10, 10.10, 10.10.1",
- "min": "En düşük değer {0} değerinden düşük olamaz",
- "minMax": "En düşük sürüm, en yüksek sürümden büyük olamaz.",
- "windows": "10.0 veya üzeri olmalıdır. 8.1 cihazlara izin vermek için boş bırakın",
- "windowsMobile": "10.0 veya üzeri olmalıdır. 8.1 cihazlara izin vermek için boş bırakın"
- },
- "allPlatformsBlocked": "Tüm cihaz platformları engellendi. Platform yapılandırmasını etkinleştirmek için platform kaydına izin verin.",
- "blockManufacturerPlaceHolder": "Üretici adı",
- "blockManufacturersHeader": "Engellenen üreticiler",
- "cannotRestrict": "Kısıtlama desteklenmiyor",
- "configurationDescription": "Bir cihazın kaydedilmesi için karşılanması gereken platform yapılandırma kısıtlamalarını belirtin. Kayıt sonrasında cihazları kısıtlamak için uyumluluk ilkelerini kullanın. ana.ikincil.derleme gibi sürümler tanımlayın. Sürüm kısıtlamaları yalnızca Şirket Portalı ile kaydedilen cihazlara uygulanır. Intune, cihazları varsayılan olarak kişiye ait olarak sınıflandırır. Cihazların şirkete ait olarak sınıflandırılması için ek eylem gerekir.",
- "configurationDescriptionLabel": "Kayıt kısıtlamalarını ayarlama hakkında daha fazla bilgi edinin",
- "configurations": "Platformları yapılandırma",
- "deviceManufacturer": "Cihaz üreticisi",
- "header": "Cihaz türü kısıtlamaları",
- "info": "Hangi platformların, sürümlerin ve yönetim türlerinin kayıt olabileceğini tanımlayın.",
- "manufacturer": "Üretici",
- "max": "En Fazla",
- "maxVersion": "En yüksek sürüm",
- "min": "En Küçük",
- "minVersion": "En düşük sürüm",
- "newPlatforms": "Yeni platformlara izin verdiniz. Platform Yapılandırmalarını güncelleştirmeniz önerilir.",
- "personal": "Kişiye ait",
- "platform": "Platform",
- "platformDescription": "Aşağıdaki platformların kaydedilmesine izin verebilirsiniz. Yalnızca desteklemediğiniz platformları engelleyin. İzin verilen platformlar ek kayıt kısıtlamalarıyla yapılandırılabilir.",
- "platformSettings": "Platform ayarları",
- "platforms": "Platform seçin",
- "platformsSelected": "{0} platform seçildi",
- "type": "Tür",
- "versions": "sürümler",
- "versionsRange": "En düşük/en yüksek aralığına izin ver:",
- "windowsTooltip": "Mobil Cihaz Yönetimi aracılığıyla kaydı kısıtlar. PC aracısının yüklenmesini kısıtlamaz. Yalnızca Windows 10 ve Windows 11 sürümleri desteklenir. Windows 8.1'e izin vermek için sürümleri boş bırakın."
- },
- "Priority": {
- "saved": "Kısıtlama Öncelikleri başarıyla kaydedildi."
- },
- "Row": {
- "announce": "Öncelik: {0}, Ad: {1}, Atanan: {2}"
- },
- "Table": {
- "deployed": "Dağıtıldı",
- "name": "Ad",
- "priority": "Öncelik"
- },
- "Type": {
- "limit": "Cihaz sınırı kısıtlaması",
- "type": "Cihaz türü kısıtlaması"
- },
- "allUsers": "Tüm Kullanıcılar",
- "androidRestrictions": "Android kısıtlamaları",
- "create": "Kısıtlama oluştur",
- "defaultLimitDescription": "Bu, grup üyeliğinden bağımsız olarak tüm kullanıcılara en düşük öncelikte uygulanan varsayılan Cihaz Sınırı Kısıtlamasıdır.",
- "defaultTypeDescription": "Bu, grup üyeliğinden bağımsız olarak tüm kullanıcılara en düşük öncelikte uygulanan varsayılan Cihaz Türü Kısıtlamasıdır.",
- "defaultWhfbDescription": "Bu, grup üyeliğinden bağımsız olarak tüm kullanıcılara en düşük öncelikte uygulanan varsayılan İş İçin Windows Hello yapılandırmasıdır.",
- "deleteMessage": "Etkilenen kullanıcılara, atanan bir sonraki en yüksek öncelik kısıtlaması veya başka bir kısıtlama atanmamışsa varsayılan kısıtlama uygulanacaktır.",
- "deleteTitle": "{0} kısıtlamasını silmek istediğinizden emin misiniz?",
- "descriptionHint": "Kısıtlama ayarları tarafından belirlenen iş kullanımını veya kısıtlama düzeyini açıklayan kısa bir paragraf.",
- "edit": "Kısıtlamayı düzenle",
- "info": "Bir cihaz, kullanıcısına atanan en yüksek öncelikli kayıt kısıtlamalarıyla uyumlu olmalıdır. Bir cihaz kısıtlamasını sürükleyerek önceliğini değiştirebilirsiniz. Varsayılan kısıtlamalar tüm kullanıcılar için en düşük önceliktedir ve kullanıcısız kayıtları yönetir. Varsayılan kısıtlamalar düzenlenebilir, ancak silinemez.",
- "iosRestrictions": "iOS kısıtlamaları",
- "mDM": "MDM",
- "macRestrictions": "macOS kısıtlamaları",
- "maxVersion": "En Yüksek Sürüm",
- "minVersion": "En Düşük Sürüm",
- "nameHint": "Bu, kısıtlama kümesini tanımlamak üzere görünür olan birincil öznitelik olacaktır.",
- "noAssignmentsStatusBar": "Kısıtlamayı en az bir gruba atayın. Özellikler'e tıklayın.",
- "nonAdminForbiddenCreateError": "Kısıtlamalar oluşturmak, kısıtlamaları düzenlemek veya silmek için Intune Hizmet Yöneticisi veya Genel Yönetici olmanız gerekir.",
- "nonAdminForbiddenEdit": "Kısıtlamaları düzenlemek için yönetici olmanız gerekiyor.",
- "notFound": "Kısıtlama bulunamadı. Silinmiş olabilir.",
- "personallyOwned": "Kişilere ait cihazlar",
- "restriction": "Kısıtlama",
- "restrictionLowerCase": "kısıtlama",
- "restrictionType": "Kısıtlama türü",
- "selectType": "Kısıtlama türünü seçin",
- "selectValidation": "Lütfen bir platform seçin",
- "typeHint": "Cihaz özelliklerini kısıtlamak için Cihaz Türü Kısıtlamasını seçin. Kullanıcı başına cihaz sayısını kısıtlamak için Cihaz Sınırı Kısıtlamasını seçin.",
- "typeRequired": "Kısıtlama türü gereklidir.",
- "winPhoneRestrictions": "Windows Phone kısıtlamaları",
- "windowsECv1Info": "Eski kayıt kısıtlamaları düzenlenemez veya yeniden önceliklendirilemez, yalnızca silinebilir.",
- "windowsECv2Info": "Kayıt kısıtlamalarını sürükleyip bırakarak önceliklerini belirtebilirsiniz. Varsayılan ve önceden yapılandırılmış kısıtlamaları aşağıda görüntüleyin. Tüm yeni kayıt kısıtlamaları, varsayılan ve önceden yapılandırılmış kısıtlamalardan daha yüksek önceliğe sahip olacaktır.",
- "windowsRestrictions": "Windows kısıtlamaları",
- "windowsRestrictionsPreview": "Filtre tabanlı Windows kısıtlamaları (önizleme)"
- },
- "InstallContextType": {
- "device": "Cihaz",
- "deviceContext": "Cihaz bağlamı",
- "user": "Kullanıcı",
- "userContext": "Kullanıcı bağlamı"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Açıklama",
- "placeholder": "Açıklama girin"
- },
- "NameTextBox": {
- "label": "Ad",
- "placeholder": "Bir ad girin"
- },
- "PublisherTextBox": {
- "label": "Yayımcı",
- "placeholder": "Yayımcı girin"
- },
- "VersionTextBox": {
- "label": "Sürüm"
- },
- "headerDescription": "Yazdığınız algılama ve düzeltme betiklerinden yeni bir özel betik paketi oluşturun."
- },
- "ScopeTags": {
- "headerDescription": "Betik paketini atamak için en az bir grup seçin."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Algılama betiği",
- "placeholder": "Betik metni girin",
- "requiredValidationMessage": "Lütfen algılama betiğini girin"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Betik imzası denetimini zorla"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Bu betiği oturum açmış olan kullanıcının kimlik bilgilerini kullanarak çalıştır"
- },
- "RemediationScript": {
- "infoBox": "Düzeltme betiği bulunmadığından bu betik yalnızca algılama modunda çalışacak."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Düzeltme komut dosyası",
- "placeholder": "Betik metni girin"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Betiği 64 bit PowerShell'de çalıştır"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Geçersiz betik. Betikte kullanılan bir veya daha fazla karakter geçerli değil."
- },
- "headerDescription": "Yazdığınız betiklerden özel bir betik paketi oluşturun. Varsayılan olarak betikler, atanmış cihazlarda her gün çalıştırılır.",
- "infoBox": "Bu betik salt okunur. Bu betik için bazı ayarlar devre dışı bırakılmış olabilir."
- },
- "title": "Özel betik oluştur",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Aralık",
- "time": "Tarih ve saat"
- },
- "Interval": {
- "day": "Her gün yinelenir",
- "days": "{0} günde bir yinelenir",
- "hour": "Her saat yinelenir",
- "hours": "{0} saatte bir yinelenir",
- "month": "Her ay yinelenir",
- "months": "{0} ayda bir yinelenir",
- "week": "Her hafta yinelenir",
- "weeks": "{0} haftada bir yinelenir"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{1} {0} (UTC)",
- "withDate": "{1} {0}"
- }
- }
- },
- "Edit": {
- "title": "Düzenle - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "İzin verilen URL'ler",
- "tooltip": "Kullanıcılarınızın iş bağlamında erişmelerine izin verilen siteleri belirtin. Diğer sitelere izin verilmez. Bir izin verilenler/engellenenler listesi yapılandırmayı seçebilirsiniz, ancak her ikisini birden belirtemezsiniz. "
- },
- "ApplicationProxyRedirection": {
- "header": "Uygulama proxy'si",
- "title": "Uygulama ara sunucusu yeniden yönlendirme",
- "tooltip": "Kullanıcılara şirket bağlantılarına ve şirket içi Web uygulamalarına erişim vermek için Uygulama ara sunucusu yeniden yönlendirmesini etkinleştirin."
- },
- "BlockedURLs": {
- "title": "Engellenen URL'ler",
- "tooltip": "Kullanıcılarınız için, iş bağlamında engellenen siteleri belirtin. Diğer tüm sitelere izin verilecek. Bir izin verilenler/engellenenler listesi yapılandırmayı seçebilirsiniz, ancak her ikisini birden belirtemezsiniz. "
- },
- "Bookmarks": {
- "header": "Yönetilen yer imleri",
- "tooltip": "Kullanıcılarınızın iş bağlamında Microsoft Edge kullanırken kullanabileceği yer işaretli URL'ler listesini girin.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Yönetilen giriş sayfası",
- "title": "Giriş sayfası kısayol URL'si",
- "tooltip": "Microsoft Edge'de yeni bir sekme açıldığında arama çubuğunun altındaki ilk simge olarak kullanıcılara gösterilecek bir giriş sayfası kısayolu yapılandırın."
- },
- "PersonalContext": {
- "label": "Kısıtlı siteleri kişisel bağlama yönlendir",
- "tooltip": "Kullanıcıların kısıtlanmış siteleri açmak için kişisel bağlamlarına geçiş yapmasına izin verilip verilmeyeceğini yapılandırın."
- }
- },
- "BooleanActions": {
- "allow": "Şirket Portalı",
- "block": "Engelle",
- "configured": "Yapılandırılan",
- "disable": "Devre dışı bırak",
- "dontRequire": "Gerekli Kılma",
- "enable": "Etkinleştir",
- "hide": "Gizle",
- "limit": "Sınır",
- "notConfigured": "Yapılandırılmadı",
- "require": "Gerekli Kıl",
- "show": "Göster",
- "yes": "Evet"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "İsteğe bağlı güncelleştirme olarak kullanıcılara sun",
- "optionalValue": "İsteğe bağlı",
- "required": "Gerekli güncelleştirme olarak kullanıcılara sun",
- "requiredValue": "Gerekli"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 gün",
- "twoDays": "2 gün",
- "zeroDays": "0 gün"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Genel Bakış"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Cihaz, Kullanıcı veya Kalite Güncelleştirme Sürümüne göre ara."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "iOS yazılım güncelleştirme profilleri yüklenemedi"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS güncelleştirme profili",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profil"
- },
- "listLoadError": "iOS yazılım güncelleştirme profilleri yüklenemiyor. Daha sonra yeniden deneyin",
- "lowercase": "iOS güncelleştirme ilkesi",
- "uppercase": "iOS Güncelleştirme ilkesi"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "Ne yazık ki mevcut sürümlerin listesini almak için Apple ile bağlantı kurulamıyor. Lütfen daha sonra yeniden deneyin veya en son sürümle devam edin.",
- "latestUpdate": "En son güncelleştirme",
- "noLongerSupported": "Seçili sürüm artık desteklenmiyor",
- "olderVersionSelected": "Önceki bir sürümü seçtiğinizden, cihazların en son sürüme güncelleştirilmemeleri için yazılım güncelleştirmelerinin görünürlüğünü erteleyen bir cihaz kısıtlama ilkesi uyguladığınızdan emin olun.",
- "prefix": "iOS/iPadOS yükleyin",
- "selectSupported": "Apple tarafından desteklenen güncelleştirme sürümünü seçin",
- "updateToInstall": "Yüklenecek güncelleştirme"
- },
- "Schedule": {
- "always": "Sonraki kontrol iletişiminde güncelleştir",
- "duringTimeWindows": "Zamanlanmış saatler içinde güncelleştir",
- "header": "Bir cihaza güncelleştirme ilkesi atandığında varsayılan olarak Intune, en son güncelleştirmeleri cihaz kontrol iletişimi sırasında dağıtır. Bunun yerine özelleştirilmiş başlangıç ve bitiş saatlerini içeren haftalık bir zamanlama oluşturabilirsiniz. Planlanan zamanın dışında güncelleştirmeyi seçerseniz, Intune planlanan zaman sona erene kadar güncelleştirmeleri dağıtmaz.",
- "infoBalloon": "Güncelleştirmelerin gerçekleştirileceği zaman. Günecelleştirmeleri zamanlanmış saatlerde veya bu saatlerin dışında zamanlamak için ek giriş gerekir.",
- "label": "Zamanlama çizelgesi türü",
- "outsideActiveHours": "Etkin saatlerin dışında güncelleştir (eski)",
- "outsideTimeWindows": "Zamanlanmış saatlerin dışında güncelleştir",
- "timeWindow": "Zaman penceresi",
- "timeZone": "Saat dilimi",
- "title": "Güncelleştirme ilkesi zamanlama ayarları:",
- "weekly": "Haftalık zamanlama",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "Güncelleştirme sırasında cihazlara yüklenecek iOS/iPadOS sürümü.",
- "label": "Yüklenecek sürümü seçin"
- },
- "header": "Atanan cihazların son iOS/iPadOS güncelleştirmelerini otomatik olarak yüklemesini zorlamak için bir profil oluşturun. Bu ayarlar, yazılım güncelleştirmelerinin nasıl ve ne zaman dağıtılacağını belirler. Bu profil, kullanıcıların işletim sistemini kendilerinin güncelleştirmesini engellemez. Bu, Cihaz Yapılandırması kısıtlama ilkesi ile 90 güne kadar engellenebilir. Güncelleştirmeler yalnızca denetlenen cihazlar için geçerli olacaktır.",
- "notAvailable": "Yok"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "Görüntülenecek iOS güncelleştirme ilkeleri yok",
- "macOsUpdates": "Görüntülenecek macOS yazılım güncelleştirme ilkesi yok",
- "windowsUpdates": "Windows 10 ve sonraki sürümler için gösterilecek bir güncelleştirme kademesi yok."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Cihaz adı",
- "deviceUpdateStatus": "Cihaz güncelleştirme durumu",
- "lastUpdated": "Son güncelleştirme",
- "osVersion": "İşletim sistemi sürümü",
- "userPrincipalName": "Kullanıcı adı"
- },
- "maximumOSVersionFilter": "En yüksek işletim sistemi sürümü",
- "minimumOSVersionFilter": "En düşük işletim sistemi sürümü",
- "noData": "Görüntülenecek veri yok",
- "searchBoxPlaceholder": "Cihaz adı, kullanıcı adı veya işletim sistemi sürümüne göre ara",
- "title": "macOS cihazları için hesap özeti"
- },
- "Category": {
- "configurationDataFile": "Yapılandırma veri dosyası",
- "critical": "Kritik",
- "firmware": "Bellenim",
- "other": "Diğer"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Son Güncelleştirme",
- "successfulUpdateCount": "Başarılı güncelleştirmeler dağıtıldı",
- "totalUpdateCount": "Dağıtılan toplam güncelleştirme sayısı",
- "updateCategory": "Kategoriyi güncelleştir",
- "updateCategoryStatus": "Kategori durumunu güncelleştir"
- },
- "noData": "Görüntülenecek veri yok"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "macOS yazılım güncelleştirme profilleri yüklenemedi"
- }
- },
- "State": {
- "available": "Kullanılabilir",
- "commandFailed": "Komut başarısız oldu",
- "downloadFailed": "İndirilemedi",
- "downloadInsufficientNetwork": "İndirme için yetersiz ağ",
- "downloadInsufficientPower": "İndirme için yetersiz güç",
- "downloadInsufficientSpace": "İndirme için yetersiz alan",
- "downloaded": "İndirildi",
- "downloading": "İndiriliyor",
- "idle": "Boşta",
- "installFailed": "Yükleme başarısız",
- "installInsufficientPower": "Yükleme için yetersiz güç",
- "installInsufficientSpace": "Yükleme için yetersiz alan",
- "installing": "Yükleniyor",
- "scheduled": "Zamanlanmış",
- "success": "Başarılı",
- "unknown": "Bilinmeyen"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Son Güncelleştirme",
- "updateName": "Güncelleştirme adı",
- "updateStatus": "Durumu güncelleştir",
- "version": "Sürüm"
- },
- "noData": "Görüntülenecek veri yok",
- "searchBoxPlaceholder": "Güncelleştirme adına veya sürüme göre ara"
- },
- "SummaryBlade": {
- "subtitle": "macOS güncelleştirme profili",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profil"
- },
- "error": "Hata",
- "errorOrErrors": "Hatalar",
- "errors": "Hatalar",
- "listLoadError": "macOS yazılım güncelleştirme profilleri yüklenemiyor. Daha sonra yeniden deneyin",
- "lowercase": "macOS güncelleştirme ilkesi",
- "other": "Diğer",
- "subtitle": "MacOS yazılım güncelleştirmesi",
- "upToDate": "Güncel",
- "uppercase": "macOS Güncelleştirme İlkesi"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Lütfen daha sonra yeniden deneyin",
- "title": "{0} silinemedi"
- },
- "LoadAllConfigurationFailed": {
- "description": "Lütfen daha sonra yeniden deneyin"
- },
- "LoadConfigurationFailed": {
- "description": "Lütfen daha sonra yeniden deneyin",
- "title": "{0} yüklenemedi"
- },
- "idWrongFormat": "Profil için sağlanan kimlik beklenen biçimde değil."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "En az bir zaman penceresi seçilmelidir",
- "tooMany": "En fazla 20 zaman penceresi yapılandırılabilir"
- }
- },
- "endDay": "Günü sonlandır",
- "endTime": "Bitiş saati",
- "startDay": "Günü başlat",
- "startTime": "Başlangıç zamanı",
- "timeWindowError": "En az bir saatlik zaman penceresi seçin."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Windows 10 ve sonraki sürümler için güncelleştirme kademesi profilleri yüklenemedi."
- }
- },
- "SummaryBlade": {
- "subtitle": "Windows 10 ve sonraki sürümler için güncelleştirme kademesi",
- "title": "İş İçin Windows Update"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 ve sonraki sürümler",
- "title": "Windows 10 ve sonraki sürümler için güncelleştirme kademesi"
- },
- "listLoadError": "Windows 10 ve sonraki sürümler için güncelleştirme kademeleri profilleri yüklenemiyor, daha sonra yeniden deneyin",
- "lowercase": "Güncelleştirme kademesi",
- "uppercase": "Güncelleştirme Kademesi"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "İlke ayarlarını güncelleştir",
- "updateRingSettings": "Kademe ayarlarını güncelleştir"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "{0} oluştur",
- "edit": "{0} Düzenle"
- }
- },
- "notScannedYet": "Henüz taranmadı",
- "outOfDateIosDevices": "Eski iOS cihazları"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Cihaz kısıtlamaları (cihaz sahibi)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS Güncelleştirme ilkesi"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Eşittir",
+ "greaterThan": "Büyüktür",
+ "greaterThanOrEqualTo": "Büyük veya eşittir",
+ "lessThan": "Küçüktür",
+ "lessThanOrEqualTo": "Küçük veya eşittir",
+ "notEqualTo": "Eşit değildir"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Betik imza denetimini uygula ve betiği sessiz çalıştır",
+ "enforceSignatureCheckTooltip": "Betiğin güvenilen bir yayıncı tarafından imzalandığını doğrulamak için 'Evet' seçeneğini belirleyin, bunu yapmak betiğin uyarı ya da komut istemi görüntülenmeden çalıştırılmasına olanak tanır. Betik engellenmeden çalışır. Betiği imza doğrulaması olmadan son kullanıcı onayıyla çalıştırmak için 'Hayır' (varsayılan) seçeneğini belirleyin.",
+ "header": "Özel algılama betiği kullan",
+ "runAs32Bit": "Betiği 64 bitlik istemcilerde 32 bitlik işlem olarak çalıştır",
+ "runAs32BitTooltip": "Betiği 64 bit istemcilerde 32 bit işlem olarak çalıştırmak için 'Evet' seçeneğini belirleyin. Betiği 64 bit istemcilerde 64 bit işlem olarak çalıştırmak için 'Hayır' (varsayılan) seçeneğini belirleyin. 32 bit istemciler, betiği 32 bit işlemde çalıştırır.",
+ "scriptContent": "Betik içeriği",
+ "scriptFile": "Betik dosyası",
+ "scriptFileNotSelectedValidation": "Bir betik dosyası seçilmedi.",
+ "scriptFileTooltip": "Uygulamanın istemci üzerindeki varlığını algılayacak bir PowerShell betiğini seçin. Betik, 0 değerli bir çıkış kodu döndürdüğünde veya STDOUT'a bir dize değeri yazdığında uygulama algılanır.",
+ "scriptSizeLimitValidation": "Algılama betiğiniz izin verilen maksimum boyutu aşıyor. Bunu algılama betiğinizin boyutunu küçülterek çözün."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Oluşturulma tarihi",
+ "dateModified": "Değiştirilme tarihi",
+ "doesNotExist": "Dosya veya klasör yok",
+ "fileOrFolderExists": "Dosya veya klasör var",
+ "sizeInMB": "Boyut (MB)",
+ "version": "Dize (sürüm)"
+ },
+ "associatedWith32Bit": "64 bit istemciler üzerinde bir 32 bit uygulamayla ilişkilendirildi",
+ "associatedWith32BitTooltip": "64 bit istemcilerde 32 bit bağlamındaki herhangi bir yol ortam değişkenini genişletmek için 'Evet' seçeneğini belirleyin. 64 bit istemcilerde 64 bit bağlamındaki herhangi bir yol değişkenini genişletmek için 'Hayır' (varsayılan) seçeneğini belirleyin. 32 bit istemciler her zaman 32 bit bağlamını kullanır.",
+ "detectionMethod": "Algılama yöntemi",
+ "detectionMethodTooltip": "Uygulamanın varlığını doğrulamak için kullanılan algılama yönteminin türünü seçin.",
+ "fileOrFolder": "Dosya veya klasör",
+ "fileOrFolderToolTip": "Algılanacak dosya veya klasör.",
+ "operator": "İşleç",
+ "operatorTooltip": "Karşılaştırmayı doğrulamak için kullanılan algılama yönteminin işlecini seçin.",
+ "path": "Yol",
+ "pathTooltip": "Algılanacak dosya veya klasörü içeren klasörün tam yolu.",
+ "value": "Değer",
+ "valueTooltip": "Seçili algılama yöntemiyle eşleşen bir değer seçin. Tarih algılama yöntemleri yerel biçimde girilmelidir."
+ },
+ "GridColumns": {
+ "pathOrCode": "Yol/Kod",
+ "type": "Tür"
+ },
+ "MsiRule": {
+ "operator": "İşleç",
+ "operatorTooltip": "MSI ürün sürümünü doğrulama karşılaştırması için işleci seçin.",
+ "productCode": "MSI ürün kodu",
+ "productCodeTooltip": "Uygulama için geçerli bir MSI ürün kodu.",
+ "productVersion": "Değer",
+ "productVersionCheck": "MSI ürün sürümü denetimi",
+ "productVersionCheckTooltip": "MSI ürün kodunun yanı sıra MSI ürün sürümünü de doğrulamak için 'Evet' seçeneğini belirleyin.",
+ "productVersionTooltip": "Uygulamanın MSI ürün sürümünü girin."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Tamsayı karşılaştırması",
+ "keyDoesNotExist": "Anahtar yok",
+ "keyExists": "Anahtar var",
+ "stringComparison": "Dize karşılaştırması",
+ "valueDoesNotExist": "Değer yok",
+ "valueExists": "Değeri var",
+ "versionComparison": "Sürüm karşılaştırması"
+ },
+ "associatedWith32Bit": "64 bit istemciler üzerinde bir 32 bit uygulamayla ilişkilendirildi",
+ "associatedWith32BitTooltip": "64 bit istemcilerde 32 bit kayıt defterini aramak için 'Evet' seçeneğini belirleyin. 64 bit istemcilerde 64 bit kayıt defterini aramak için 'Hayır' (varsayılan) seçeneğini belirleyin. 32 bit istemciler, her zaman 32 bit kayıt defterini arar.",
+ "detectionMethod": "Algılama yöntemi",
+ "detectionMethodTooltip": "Uygulamanın varlığını doğrulamak için kullanılan algılama yönteminin türünü seçin.",
+ "keyPath": "Anahtar yolu",
+ "keyPathTooltip": "Algılanacak değeri içeren kayıt defteri girişinin tam yolu.",
+ "operator": "İşleç",
+ "operatorTooltip": "Karşılaştırmayı doğrulamak için kullanılan algılama yönteminin işlecini seçin.",
+ "value": "Değer",
+ "valueName": "Değer adı",
+ "valueNameTooltip": "Algılanacak kayıt defteri değerinin adı.",
+ "valueTooltip": "Seçili algılama yöntemi ile eşleşen bir değer seçin."
+ },
+ "RuleTypeOptions": {
+ "file": "Dosya",
+ "mSI": "MSI",
+ "registry": "Kayıt Defteri"
+ },
+ "gridAriaLabel": "Algılama Kuralları",
+ "header": "Uygulamanın var olduğunu gösteren bir kural oluşturun.",
+ "noRulesSelectedPlaceholder": "Hiçbir kural belirtilmedi.",
+ "ruleTableLimit": "25'e kadar algılama kuralı ekleyebilirsiniz",
+ "ruleType": "Kural türü",
+ "ruleTypeTooltip": "Eklenecek algılama kuralı türünü seçin."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Özel algılama betiği kullan",
+ "manual": "Algılama kurallarını el ile yapılandırın"
+ },
+ "bladeTitle": "Algılama kuralları",
+ "header": "Uygulamanın varlığını algılamak için kullanılacak uygulamaya özel kuralları yapılandırın.",
+ "rulesFormat": "Kuralların biçimi",
+ "rulesFormatTooltip": "Algılama kurallarını el ile yapılandırmayı veya uygulamanın var olduğunu algılamak için özel bir betik kullanmayı seçin.",
+ "selectorLabel": "Algılama kuralları"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Kullanıcılar adına Microsoft Yazılımı Lisans Koşulları'nı kabul edin",
"appSuiteConfigurationLabel": "Uygulama paketi yapılandırması",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} dil seçildi",
"xmlConfigurationLabel": "XML Yapılandırması"
},
- "Filters": {
- "ruleSyntax": "Kural söz dizimi",
- "filters": "Filtreler"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Kullanıcının ayar değiştirmesine izin ver",
- "tooltip": "Kullanıcının ayarı değiştirmesine izin verilip verilmediğini belirtin."
- },
- "AllowWorkAccounts": {
- "title": "Yalnızca iş veya okul hesaplarına izin ver",
- "tooltip": " Bu ayar etkinleştirildiğinde kullanıcılar Outlook'a kişisel e-posta ve depolama hesapları ekleyemez. Kullanıcı Outlook'a kişisel hesap eklemişse kişisel hesabı kaldırması istenir. Kullanıcı bu hesabı kaldırmazsa iş veya okul hesabı eklenemez."
- },
- "BlockExternalImages": {
- "title": "Harici görüntüleri engelle",
- "tooltip": "Harici görüntüleri engelleme özelliği etkinleştirildiğinde uygulama İnternet'te barındırılan ve ileti gövdesine ekli görüntülerin indirilmesini engeller. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Kapalı'dır"
- },
- "ConfigureEmail": {
- "title": "E-posta hesabı ayarlarını yapılandır"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Varsayılan uygulama imzası, uygulamanın ileti oluşturma sırasında varsayılan imza olarak \"Android için Outlook'u edinin\" imzasını kullanıp kullanmayacağını belirtir. Ayar Kapalı olarak yapılandırıldıysa varsayılan imza kullanılmaz, ancak kullanıcılar kendi imzalarını ekleyebilir.\r\n\r\nYapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak ayarlanır.",
- "iOS": "Varsayılan uygulama imzası, uygulamanın ileti oluşturma sırasında varsayılan imza olarak \"iOS için Outlook'u edinin\" imzasını kullanıp kullanmayacağını belirtir. Ayar Kapalı olarak yapılandırıldıysa varsayılan imza kullanılmaz, ancak kullanıcılar kendi imzalarını ekleyebilir.\r\n\r\nYapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak ayarlanır."
- },
- "title": "Varsayılan uygulama imzası"
- },
- "OfficeFeedReplies": {
- "title": "Keşif Akışı",
- "tooltip": "Keşif Akışı, en sık erişilen Office dosyalarınızı öne çıkarır. Kullanıcı için Delve etkinleştirildiğinde, bu akış da varsayılan olarak etkinleştirilir. Yapılandırılmadı olarak ayarlandığında, varsayılan uygulama ayarı Açık olarak belirlenir."
- },
- "OrganizeMailByThread": {
- "title": "Postaları yazışmaya göre düzenleme",
- "tooltip": "Outlook varsayılan olarak, posta konuşmalarını yazışmalardan oluşan bir görüşme görünümünde toplar. Bu ayar devre dışı bırakılırsa Outlook her bir postayı ayrı ayrı görüntüler ve bunları yazışmaya göre gruplandırmaz."
- },
- "PlayMyEmails": {
- "title": "E-postalarımı Oynat",
- "tooltip": "E-postalarımı Oynat özelliği uygulamada varsayılan olarak etkin değildir ancak uygun kullanıcıların gelen kutusunda bir başlık olarak öne çıkarılır. Kapalı olarak ayarlandığında, bu özellik uygulamada uygun kullanıcılar için öne çıkarılmaz. Bu özellik Kapalı olarak ayarlansa bile kullanıcılar, E-postalarımı Oynat özelliğini uygulamadan el ile etkinleştirmeyi seçebilir. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık olur ve özellik uygun kullanıcılar için öne çıkarılır."
- },
- "SuggestedReplies": {
- "title": "Önerilen yanıtlar",
- "tooltip": "Bir iletiyi açtığınızda Outlook, iletinin altında yanıtlar önerebilir. Önerilen bir yanıtı seçerseniz göndermeden önce bunu düzenleyebilirsiniz."
- },
- "SyncCalendars": {
- "title": "Takvimleri Eşitle",
- "tooltip": "Kullanıcıların Outlook takvimini yerel takvim uygulamasıyla ve veritabanıyla eşitleyip eşitleyemeyeceğini yapılandırın."
- },
- "TextPredictions": {
- "title": "Metin Tahminleri",
- "tooltip": "Outlook, siz ileti oluştururken sözcük ve tümceler önerebilir. Outlook öneri sunduğunda öneriyi kabul etmek için kaydırın. Yapılandırılmadı olarak ayarlandığında varsayılan uygulama ayarı Açık olarak ayarlanır."
- },
- "ThemesEnabled": {
- "title": "Etkin temalar",
- "tooltip": "Kullanıcının özel görsel tema kullanmasına izin verilip verilmeyeceğini belirtin."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "Chrome işletim sistemi cihazları"
- },
- "ManagedDesktop": {
- "adminContacts": "Yönetici kişileri",
- "appPackaging": "Uygulama paketleme",
- "autopatchGroups": "Otomatik yama grupları",
- "devices": "Cihazlar",
- "featureEnablement": "Özellik etkinleştirme",
- "feedback": "Geri Bildirim",
- "gettingStarted": "Başlarken",
- "messages": "İletiler",
- "onlineResources": "Çevrimiçi kaynaklar",
- "policyHealth": "İlke durumu",
- "policyHealthPreview": "İlke sistem durumu (önizleme)",
- "releaseManagement": "Sürüm yönetimi",
- "serviceRequests": "Hizmet istekleri",
- "settings": "Ayarlar",
- "supportRequests": "Destek istekleri",
- "tenantEnrollment": "Kiracı kaydı",
- "tenantManagement": "Kiracı yönetimi"
- },
- "actions": "Uyumsuzluk Eylemleri",
- "advancedExchangeSettings": "Exchange Online ayarları",
- "advancedThreatProtection": "Uç Nokta için Microsoft Defender",
- "allApps": "Tüm uygulamalar",
- "allDevices": "Tüm cihazlar",
- "androidFotaDeployments": "Android FOTA dağıtımları",
- "appBundles": "Uygulama Paketi Grupları",
- "appCategories": "Uygulama kategorileri",
- "appConfigPolicies": "Uygulama yapılandırma ilkeleri",
- "appConfigurationStatus": "Uygulama Yapılandırması Durumu",
- "appInstallStatus": "Uygulama yükleme durumu",
- "appLicences": "Uygulama lisansları",
- "appProtectionPolicies": "Uygulama koruma ilkeleri",
- "appProtectionStatus": "Uygulama Koruma durumu",
- "appSelectiveWipe": "Uygulama seçmeli silme",
- "appleVppTokens": "Apple VPP Belirteçleri",
- "apps": "Uygulamalar",
- "assign": "Atamalar",
- "assignedPermissions": "Atanan izinler",
- "assignedRoles": "Atanan roller",
- "autopilotDeploymentReport": "Autopilot dağıtımları (önizleme)",
- "autopilotDeploymentReportV2": "Autopilot dağıtımları 2.0 (önizleme)",
- "brandingAndCustomization": "Özelleştirme",
- "cartProfiles": "Kart profilleri",
- "certificateConnectors": "Sertifika bağlayıcıları",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Buluta ekli cihazlar (önizleme)",
- "cloudPcActions": "Bulut PC eylemleri (önizleme)",
- "cloudPcMaintenanceWindows": "Bulut PC bakım pencereleri (Önizleme)",
- "compliancePolicies": "Uyumluluk ilkeleri",
- "complianceScriptManagement": "Betikler",
- "complianceScriptManagementPreview": "Betikler (önizleme)",
- "complianceSettings": "Uyumluluk ilkesi ayarları",
- "conditionStatements": "Koşul deyimleri",
- "conditions": "Konumlar",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Yapılandırma profilleri",
- "configurationScripts": "Yapılandırma Komut Dosyası",
- "connectorsAndTokens": "Bağlayıcılar ve belirteçler",
- "corporateDeviceIdentifiers": "Şirket cihazı tanımlayıcıları",
- "customAttributes": "Özel öznitelikler",
- "customNotifications": "Özel bildirimler",
- "deploymentSettings": "Dağıtım ayarları",
- "derivedCredentials": "Türetilmiş Kimlik Bilgileri",
- "deviceActions": "Cihaz eylemleri",
- "deviceCategories": "Cihaz kategorileri",
- "deviceCleanUp": "Cihaz temizleme kuralları",
- "deviceEnrollmentManagers": "Cihaz kayıt yöneticileri",
- "deviceExecutionStatus": "Cihaz durumu",
- "deviceLimitEnrollmentRestrictions": "Kayıt cihazı sınırı kısıtlamaları",
- "deviceTypeEnrollmentRestrictions": "Kayıt cihazı platform kısıtlamaları",
- "devices": "Cihazlar",
- "discoveredApps": "Bulunan uygulamalar",
- "edgePolicies": "Microsoft Edge İlkeleri",
- "embeddedSIM": "eSIM hücresel profilleri (önizleme)",
- "enrollDevices": "Cihazları kaydet",
- "enrollmentFailures": "Kayıt hataları",
- "enrollmentNotifications": "Kayıt anlaşması bildirimleri (önizleme)",
- "enrollmentRestrictions": "Kayıt kısıtlamaları",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange hizmet bağlayıcıları",
- "failuresForCumulativeQualityUpdates": "Windows Toplu Kalite güncelleştirmesi hataları",
- "failuresForDriverUpdates": "Windows Sürücü güncelleştirme hataları",
- "failuresForFeatureUpdates": "Özellik güncelleştirme hataları",
- "failuresForQualityUpdates": "Windows Hızlandırılmış güncelleştirme hataları",
- "featureFlighting": "Özellik yayını",
- "featureUpdateDeployments": "Windows 10 ve üstü için özellik güncelleştirmeleri",
- "flighting": "Süreleme",
- "fotaUpdate": "Üretici yazılımı kablosuz güncelleştirmesi",
- "groupPolicy": "Yönetim Şablonları",
- "groupPolicyAnalytics": "Grup ilkesi analizi",
- "helpSupport": "Yardım ve destek",
- "helpSupportReplacement": "Yardım ve destek ({0})",
- "iOSAppProvisioning": "iOS uygulama sağlama profilleri",
- "incompleteUserEnrollments": "Eksik kullanıcı kayıtları",
- "iosUpdates": "iOS/iPadOS ilkelerini güncelleştir",
- "legacyPcManagement": "Eski bilgisayar yönetimi",
- "macOSSoftwareUpdate": "macOS için güncelleştirme ilkeleri",
- "macOSSoftwareUpdateAccountSummaries": "macOS cihazlar için yükleme durumu",
- "macOSSoftwareUpdateCategorySummaries": "Yazılım güncelleştirmeleri özeti",
- "macOSSoftwareUpdateStateSummaries": "güncelleştirmeler",
- "managedGooglePlay": "Yönetilen Google Play",
- "msfb": "İş İçin Microsoft Store",
- "myPermissions": "İzinlerim",
- "notifications": "Bildirimler",
- "officeApps": "Office uygulamaları",
- "officeProPlusPolicies": "Office uygulamaları için ilkeler",
- "onPremise": "Şirket İçi",
- "onPremisesConnector": "Exchange ActiveSync şirket içi bağlayıcısı",
- "onPremisesDeviceAccess": "Exchange ActiveSync cihazları",
- "onPremisesManageAccess": "Exchange şirket içi erişimi",
- "outOfDateIosDevices": "iOS cihazları için yükleme hataları",
- "overview": "Genel Bakış",
- "partnerDeviceManagement": "İş ortağı cihaz yönetimi",
- "perUpdateRingDeploymentState": "Güncelleştirme halkası dağıtım durumuna göre",
- "permissions": "İzinler",
- "platformApps": "{0} uygulama",
- "platformDevices": "{0} cihaz",
- "platformEnrollment": "{0} kaydı",
- "policies": "İlkeler",
- "profiles": "Profiller",
- "properties": "Özellikler",
- "reports": "Raporlar",
- "retireNoncompliantDevices": "Uyumlu olmayan cihazları kullanımdan kaldır",
- "retireNoncompliantDevicesPreview": "Uyumlu olmayan cihazları kullanımdan kaldır (önizleme)",
- "role": "Rol",
- "scriptManagement": "Komut Dosyaları",
- "securityBaselines": "Güvenlik temelleri",
- "serviceToServiceConnector": "Exchange Online bağlayıcısı",
- "servicenowConnector": "ServiceNow bağlayıcısı",
- "shellScripts": "Kabuk betikleri",
- "teamViewerConnector": "TeamViewer bağlayıcısı",
- "telecomeExpenseManagement": "Telekom gider yönetimi",
- "tenantAdmin": "Kiracı yöneticisi",
- "tenantAdministration": "Kiracı yönetimi",
- "termsAndConditions": "Hüküm ve koşullar",
- "titles": "Başlıklar",
- "troubleshoot": "Sorun giderme",
- "troubleshootSupport": "Sorun Giderme ve destek",
- "user": "Kullanıcı",
- "userExecutionStatus": "Kullanıcı durumu",
- "wdacSupplementalPolicies": "S modu ek ilkeleri",
- "win32CatalogUpdateApp": "Kurumsal Uygulama Yönetimi uygulamaları için güncelleştirmeler",
- "win32CatalogUpdateAppInPreview": "Windows (Win32) katalog uygulamaları için güncelleştirmeler (Önizleme)",
- "windows10DriverUpdate": "Windows 10 ve üzeri için sürücü güncelleştirmeleri",
- "windows10QualityUpdate": "Windows 10 ve üstü için kalite güncelleştirmeleri",
- "windows10UpdateRings": "Windows 10 ve sonraki sürümler için güncelleştirme kademeleri",
- "windows10XPolicyFailures": "Windows 10X ilke hataları",
- "windows365PartnerConnector": "Windows 365 iş ortağı bağlayıcıları",
- "windowsDiagnosticData": "Windows verileri",
- "windowsEnterpriseCertificate": "Windows Enterprise sertifikası",
- "windowsManagement": "Betikler",
- "windowsSideLoadingKeys": "Windows dışarıdan yükleme anahtarları",
- "windowsSymantecCertificate": "Windows DigiCert sertifikası",
- "windowsThreatReport": "Tehdit aracı durumu"
- },
- "ScopeTypes": {
- "allDevices": "tüm aygıtlar",
- "allUsers": "Tüm Kullanıcılar",
- "allUsersAndDevices": "Tüm Kullanıcılar ve Tüm Cihazlar",
- "selectedGroups": "Seçili Gruplar"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Varsayılan olarak Microsoft Arama",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype Kurumsal",
- "oneDrive": "OneDrive Masaüstü",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone ve iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Desteklenmiyor",
+ "supportEnding": "Destek sonu",
+ "supported": "Destekleniyor"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Varsayılan",
- "header": "Güncelleştirme Önceliği",
- "postponed": "Ertelendi",
- "priority": "Yüksek Öncelik"
- },
- "AutoUpdateSupersededApps": {
- "label": "Otomatik güncelleştirme",
- "sublabel": "Eski uygulamalar kullanıcı tarafından Şirket Portalı’ndan yüklendiyse, yeni uygulamanın yüklenmesini gerektir."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Arka Plan",
- "displayText": "{0} içinde içerik indirme",
- "foreground": "Önalan",
- "header": "Teslim iyileştirme önceliği"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Kullanıcının yeniden başlatma bildirimini ertelemesine izni ver",
- "countdownDialog": "Yeniden başlatma gerçekleşmeden önce yeniden başlatma geri sayımı iletişim kutusunun ne zaman görüntüleneceği seçin (dakika)",
- "durationInMinutes": "Cihaz yeniden başlatma mehil süresi (dakika)",
- "snoozeDurationInMinutes": "Erteleme süresini seçin (dakika)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Saat dilimi",
- "local": "Cihaz saat dilimi",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Tarih ve saat",
- "deadlineTimeColumnLabel": "Yükleme son tarihi",
- "deadlineTimeDatePickerErrorMessage": "Seçili tarih geçerli tarihten sonra olmalıdır",
- "deadlineTimeLabel": "Uygulama yükleme son tarihi",
- "defaultTime": "Hemen",
- "infoText": "Bu uygulama, aşağıda bir kullanılabilirlik süresi belirtilmezse dağıtıldığı anda kullanılabilir. Bu gerekli bir uygulamaysa, yükleme son tarihini belirtebilirsiniz.",
- "specificTime": "Belirli bir tarih ve saat",
- "startTimeColumnLabel": "Kullanılabilirlik",
- "startTimeDatePickerErrorMessage": "Seçilen tarih, son tarihten önce olmalıdır",
- "startTimeLabel": "Uygulama kullanılabilirliği"
- },
- "restartGracePeriodHeader": "Yeniden başlatma mehil süresi",
- "restartGracePeriodLabel": "Cihaz yeniden başlatma mehil süresi",
- "summaryTitle": "Son kullanıcı deneyimi"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "Seçili gereksinim olarak dosya veya klasör.",
- "pathToolTip": "Algılanacak dosya veya klasörün tam yolu.",
- "property": "Özellik",
- "valueToolTip": "Seçili algılama yöntemiyle eşleşen bir gereksinim değeri seçin. Tarih ve saat gereksinimi yerel biçimde girilmelidir."
- },
- "GridColumns": {
- "pathOrScript": "Yol/Betik",
- "type": "Tür"
- },
- "Registry": {
- "keyPath": "Anahtar yolu",
- "keyPathTooltip": "Değeri bir gereksinim olarak içeren kayıt defteri girişinin tam yolu.",
- "operator": "İşleç",
- "operatorTooltip": "Karşılaştırma için işleci seçin.",
- "registryRequirement": "Kayıt defteri anahtarı gereksinimi",
- "registryRequirementTooltip": "Kayıt defteri anahtarı gereksinim karşılaştırmasını seçin.",
- "valueName": "Değer adı",
- "valueNameTooltip": "Gerekli kayıt defteri değerinin adı."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Tüm önerilen sürücü güncelleştirmelerini otomatik olarak onayla",
+ "manual": "Sürücü güncelleştirmelerini kendiniz onaylayıp dağıtın"
+ },
+ "BulkActions": {
+ "button": "Toplu eylemler"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Onay yöntemi:"
},
- "RequirementTypeOptions": {
- "fileType": "Dosya",
- "registry": "Kayıt Defteri",
- "script": "Betik"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Boolean",
- "dateTime": "Tarih ve Saat",
- "float": "Kayan Nokta",
- "integer": "Tam sayı",
- "string": "Dize",
- "version": "Sürüm"
- },
- "duplicateName": "{0} betik adı zaten kullanılıyor. Lütfen farklı bir ad girin.",
- "enforceSignatureCheck": "Betik imzası denetimini zorla",
- "enforceSignatureCheckTooltip": "Betiğin güvenilen bir yayıncı tarafından imzalandığını doğrulamak için \"Evet\" seçeneğini belirleyin. Bunun yapılması, betiğin uyarı ya da komut istemi görüntülenmeden çalıştırılmasına olanak tanır. Betik engellenmeden çalışır. Betiği imza doğrulaması olmadan, son kullanıcı onayıyla çalıştırmak için \"Hayır\" (varsayılan) seçeneğini belirleyin.",
- "loggedOnCredentials": "Bu betiği oturum açmış olan kullanıcının kimlik bilgilerini kullanarak çalıştır",
- "loggedOnCredentialsTooltip": "Betiği oturum açılan cihazın kimlik bilgilerini kullanarak çalıştır.",
- "operatorTooltip": "Gereksinim karşılaştırması için işleci seçin.",
- "requirementMethod": "Çıkış veri türünü seçin",
- "requirementMethodTooltip": "Bir algılama eşleşme gereksinimi belirlenirken kullanılan veri türünü seçin.",
- "scriptContent": "Betik içeriği",
- "scriptFile": "Betik dosyası",
- "scriptFileTooltip": "İstemcide uygulamanın olup olmadığını algılayacak bir PowerShell betiği seçin. Uygulama algılanırsa gereksinim süreci tarafından 0 değerli bir çıkış kodu sağlanır ve STDOUT'a bir dize değeri yazılır.",
- "scriptName": "Betik adı",
- "value": "Değer",
- "valueTooltip": "Seçili algılama yöntemiyle eşleşen bir gereksinim değeri seçin. Tarih ve saat gereksinimi yerel biçimde girilmelidir."
+ "DeploymentDeferralInDays": {
+ "label": "Güncelleştirmeleri şu kadar süre sonra kullanıma sun:",
+ "units": "(gün)",
+ "value": "{0} gün"
+ },
+ "DriverAction": {
+ "header": "Aşağıdan bir eylem seçin.",
+ "label": "Sürücü eylemi",
+ "placeholder": "Eylem seçin"
},
- "bladeTitle": "Gereksinim kuralı ekle",
- "createRequirementHeader": "Bir gereksinim oluşturun.",
- "header": "Ek gereksinim kuralları yapılandırın",
- "label": "Ek gereksinim kuralları",
- "noRequirementsSelectedPlaceholder": "Gereksinim belirtilmedi.",
- "requirementType": "Gereksinim türü",
- "requirementTypeTooltip": "Bir gereksiniminin nasıl doğrulanacağının belirlenmesi için kullanılacak algılama yöntemini seçin."
- },
- "architectures": "İşletim sistemi mimarisi",
- "architecturesTooltip": "Uygulamayı yüklemek için gereken mimarileri seçin.",
- "bladeTitle": "Gereksinimler",
- "diskSpace": "Gerekli disk alanı (MB)",
- "diskSpaceTooltip": "Uygulamayı yüklemek için sistem sürücüsünde gereken boş disk alanı.",
- "header": "Uygulamanın yüklenebilmesi için cihazların karşılaması gereken gereksinimleri belirtin:",
- "maximumTextFieldValue": "Değer en fazla {0} olabilir.",
- "minimumCpuSpeed": "Gereken en düşük CPU hızı (MHz)",
- "minimumCpuSpeedTooltip": "Uygulamayı yüklemek için gereken en düşük CPU hızı.",
- "minimumLogicalProcessors": "Gereken en düşük mantıksal işlemci sayısı",
- "minimumLogicalProcessorsTooltip": "Uygulamayı yüklemek için gereken en düşük mantıksal işlemci sayısı.",
- "minimumOperatingSystem": "Minimum işletim sistemi",
- "minimumOperatingSystemTooltip": "Uygulamayı yüklemek için gereken en düşük işletim sistemi seçin.",
- "minumumTextFieldValue": "Değer en az {0} olmalıdır.",
- "physicalMemory": "Gerekli fiziksel bellek (MB)",
- "physicalMemoryTooltip": "Uygulamayı yüklemek için gereken fiziksel bellek (RAM).",
- "selectorLabel": "Gereksinimler",
- "validNumber": "Lütfen geçerli bir sayı girin."
- },
- "PolicySet": {
- "appManagement": "Uygulama yönetimi",
- "assignments": "Atamalar",
- "basics": "Temel Ayarlar",
- "deviceEnrollment": "Cihaz kaydı",
- "deviceManagement": "Cihaz yönetimi",
- "scopeTags": "Kapsam etiketleri",
- "appConfigurationTitle": "Uygulama yapılandırma ilkeleri",
- "appProtectionTitle": "Uygulama koruma ilkeleri",
- "appTitle": "Uygulamalar",
- "iOSAppProvisioningTitle": "iOS uygulama sağlama profilleri",
- "deviceLimitRestrictionTitle": "Cihaz sınırı kısıtlamaları",
- "deviceTypeRestrictionTitle": "Cihaz türü kısıtlamaları",
- "enrollmentStatusSettingTitle": "Kayıt durumu sayfaları",
- "windowsAutopilotDeploymentProfileTitle": "Windows Autopilot Deployment profilleri",
- "deviceComplianceTitle": "Cihaz uyumluluk ilkeleri",
- "deviceConfigurationTitle": "Cihaz yapılandırma profilleri",
- "powershellScriptTitle": "Powershell betikleri"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Dahil edilen sürücüler"
+ },
+ "SelectDrivers": {
+ "header": "Toplu işleminize dahil edilecek sürücüleri seçin"
+ },
+ "SelectDriversToInclude": {
+ "button": "Dahil edilecek sürücüleri seçin"
+ },
+ "SelectLessDrivers": {
+ "validation": "En fazla yüz sürücü seçilebilir"
+ },
+ "SelectMoreDrivers": {
+ "validation": "En az bir sürücü seçilmelidir"
+ },
+ "SelectedDrivers": {
+ "label": "Seçili sürücüler"
+ },
+ "availabilityDate": "Windows Update'te kullanılabilir yap",
+ "bladeTitle": "Sürücü güncelleştirmeleri Windows 10 ve sonrası (önizleme)",
+ "lastSync": "Son eşitleme:",
+ "lastSyncDefaultText": "İlk envanter koleksiyonu beklemede",
+ "loadError": "Yüklenemedi!"
+ },
+ "DriverStatus": {
+ "approved": "Onaylandı",
+ "declined": "Reddedildi",
+ "export": "Önerilen sürücüler dışarı aktarılıyor",
+ "needsReview": "Gözden geçirme gerekiyor",
+ "paused": "Duraklatıldı"
+ },
+ "DriversToReview": {
+ "text": "Gözden geçirilecek {0}"
+ },
+ "Subtitle": {
+ "automatic": "Otomatik onay sürücüsü güncelleştirme ilkesi",
+ "manual": "El ile onay sürücüsü güncelleştirme ilkesi"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Önerilen",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahreyn",
- "countryNameZA": "Güney Afrika",
- "countryNameJO": "Ürdün",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Çek Cumhuriyeti",
- "countryNameLT": "Litvanya",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ekvador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hong Kong ÖİB",
- "countryNameGH": "Gana",
- "countryNameSA": "Suudi Arabistan",
- "countryNamePG": "Papua Yeni Gine",
- "countryNameBW": "Botsvana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "Hindistan",
- "countryNameHN": "Honduras",
- "countryNameRO": "Romanya",
- "countryNameKZ": "Kazakistan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Gürcistan",
- "countryNameTT": "Trinidad ve Tobago",
- "countryNameMP": "Kuzey Mariana Adaları",
- "countryNameMV": "Maldivler",
- "countryNameFI": "Finlandiya",
- "countryNameNO": "Norveç",
- "countryNameEE": "Estonya",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Özbekistan",
- "countryNameME": "Karadağ",
- "countryNameTJ": "Tacikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "Fransa",
- "countryNameOM": "Umman",
- "countryNameAO": "Angola",
- "countryNameIT": "İtalya",
- "countryNameAZ": "Azerbaycan",
- "countryNameKG": "Kırgızistan",
- "countryNameWF": "Wallis ve Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falkland Adaları (Islas Malvinas)",
- "countryNameGY": "Guyana",
- "countryNameSS": "Güney Sudan",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Suriye",
- "countryNameMD": "Moldova",
- "countryNameVC": "Saint Vincent ve Grenadinler",
- "countryNameID": "Endonezya",
- "countryNameRE": "Reunion",
- "countryNameER": "Eritre",
- "countryNameMK": "Kuzey Makedonya",
- "countryNameTG": "Togo",
- "countryNamePF": "Fransız Polinezyası",
- "countryNameKY": "Cayman Adaları",
- "countryNameIO": "İngiliz Hint Okyanusu Toprakları",
- "countryNameRU": "Rusya",
- "countryNameMA": "Fas",
- "countryNameAU": "Avustralya",
- "countryNameBO": "Bolivya",
- "countryNameVA": "Holy See (Vatikan Kent Devleti)",
- "countryNameVG": "İngiliz Virgin Adaları",
- "countryNameFM": "Mikronezya",
- "countryNameAQ": "Antarktika",
- "countryNameZM": "Zambiya",
- "countryNameBR": "Brezilya",
- "countryNameIS": "İzlanda",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgaristan",
- "countryNamePR": "Porto Riko",
- "countryNameGI": "Cebelitarık",
- "countryNameBS": "Bahamalar",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macau ÖİB",
- "countryNameRW": "Ruanda",
- "countryNameAS": "Amerikan Samoası",
- "countryNameBQ": "Bonaire, Sint Eustatius ve Saba",
- "countryNameMF": "Saint Martin",
- "countryNameTM": "Türkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "Yeni Kaledonya",
- "countryNameAC": "Ascension Adası",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladeş",
- "countryNameMW": "Malavi",
- "countryNameGM": "Gambiya",
- "countryNameGA": "Gabon",
- "countryNameCA": "Kanada",
- "countryNameSH": "Saint Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Moğolistan",
- "countryNamePA": "Panama",
- "countryNameCM": "Kamerun",
- "countryNameNE": "Nijer",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japonya",
- "countryNameCY": "Kıbrıs",
- "countryNameCD": "Demokratik Kongo Cumhuriyeti",
- "countryNameTN": "Tunus",
- "countryNameTR": "Türkiye",
- "countryNameWS": "Samoa",
- "countryNameSE": "İsveç",
- "countryNameXK": "Kosova",
- "countryNameKH": "Kamboçya",
- "countryNamePL": "Polonya",
- "countryNameDZ": "Cezayir",
- "countryNameLR": "Liberya",
- "countryNameSO": "Somali",
- "countryNameDM": "Dominika",
- "countryNameEG": "Mısır",
- "countryNameGF": "Fransız Guyanası",
- "countryNameNZ": "Yeni Zelanda",
- "countryNamePS": "Filistin Yönetimi",
- "countryNameIL": "İsrail",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Yunanistan",
- "countryNameNG": "Nijerya",
- "countryNameMR": "Moritanya",
- "countryNameVI": "ABD Virgin Adaları",
- "countryNameGQ": "Ekvator Ginesi",
- "countryNameMX": "Meksika",
- "countryNameDJ": "Cibuti",
- "countryNameGN": "Gine",
- "countryNameCN": "Çin",
- "countryNameMZ": "Mozambik",
- "countryNameBV": "Bouvet Adası",
- "countryNameNF": "Norfolk Adası",
- "countryNameTZ": "Tanzanya",
- "countryNameAI": "Anguilla",
- "countryNameGS": "Güney Georgia ve Güney Sandwich Adaları",
- "countryNameRS": "Sırbistan",
- "countryNameCC": "Cocos (Keeling) Adaları",
- "countryNameNA": "Namibya",
- "countryNameDE": "Almanya",
- "countryNameCG": "Kongo Cumhuriyeti",
- "countryNameKW": "Kuveyt",
- "countryNameMH": "Marshall Adaları",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarus",
- "countryNameMY": "Malezya",
- "countryNameST": "Sao Tome ve Principe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Çad",
- "countryNameCX": "Christmas Adası",
- "countryNameIR": "İran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Gine-Bissau",
- "countryNameUA": "Ukrayna",
- "countryNameCU": "Küba",
- "countryNameCO": "Kolombiya",
- "countryNameNI": "Nikaragua",
- "countryNameHR": "Hırvatistan",
- "countryNameSC": "Seyşeller",
- "countryNameNL": "Hollanda",
- "countryNameUM": "ABD Küçük Harici Adaları",
- "countryNameIM": "Man Adası",
- "countryNameFJ": "Fiji",
- "countryNameSR": "Surinam",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "Birleşik Krallık",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovenya",
- "countryNameAM": "Ermenistan",
- "countryNameAR": "Arjantin",
- "countryNamePM": "Saint Pierre ve Miquelon",
- "countryNameTF": "Fransız Güney ve Antarktika Bölgesi",
- "countryNameDO": "Dominik Cumhuriyeti",
- "countryNameZW": "Zimbabve",
- "countryNameMQ": "Martinik",
- "countryNamePT": "Portekiz",
- "countryNameCF": "Orta Afrika Cumhuriyeti",
- "countryNameBE": "Belçika",
- "countryNameKM": "Komorolar",
- "countryNameLY": "Libya",
- "countryNameIE": "İrlanda",
- "countryNameKP": "Kuzey Kore",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slovakya",
- "countryNameTC": "Turks ve Caicos Adaları",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Yemen",
- "countryNameBA": "Bosna-Hersek",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Şili",
- "countryNameIQ": "Irak",
- "countryNameSJ": "Svalbard ve Jan Mayen Adaları",
- "countryNameAX": "Aland Adaları",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Faroe Adaları",
- "countryNameBL": "Saint Barthélemy",
- "countryNameLB": "Lübnan",
- "countryNameJM": "Jamaika",
- "countryNameAF": "Afganistan",
- "countryNameES": "İspanya",
- "countryNameMC": "Monako",
- "countryNameSG": "Singapur",
- "countryNameAL": "Arnavutluk",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Esvatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Fildişi Sahili (Côte d’Ivoire)",
- "countryNameTW": "Tayvan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cook Adaları",
- "countryNameTH": "Tayland",
- "countryNameHM": "Heard Adası ve McDonald Adaları",
- "countryNameGD": "Grenada",
- "countryNameUS": "Amerika Birleşik Devletleri",
- "countryNameAT": "Avusturya",
- "countryNameKR": "Kore Cumhuriyeti",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Danimarka",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Etiyopya",
- "countryNameMG": "Madagaskar",
- "countryNameCR": "Kosta Rika",
- "countryNameLU": "Lüksemburg",
- "countryNameQA": "Katar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Solomon Adaları",
- "countryNameAE": "Birleşik Arap Emirlikleri",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua ve Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Macaristan",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "İsviçre",
- "countryNamePN": "Pitcairn Adaları",
- "countryNameGL": "Grönland",
- "countryNamePH": "Filipinler",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts ve Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Letonya",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "{0} eşitlenemiyor",
+ "failureDescription": "Bir hatayla karşılaştık ve istenen eşitlemeyi tamamlayamadık. Lütfen yeniden deneyin.",
+ "pending": "{0} eşitleme devam ediyor",
+ "pendingDescription": "En son veriler alınıyor. Bu işlem birkaç dakika sürebilir.",
+ "success": "{0} eşitleme tamamlandı",
+ "successDescription": "WUfB hizmetiyle eşitleme {0} saatinde tamamlandı"
+ },
+ "SyncSpinner": {
+ "text": "Eşitleme devam ediyor. Bu işlem birkaç dakika sürebilir. Bir uyarı görmezseniz birkaç dakika sonra tekrar kontrol edin."
+ },
+ "TabName": {
+ "basics": "Temel bilgiler",
+ "driverUpdateSettings": "Ayarlar",
+ "otherDrivers": "Diğer sürücüler",
+ "properties": "Özellikler",
+ "recommendedDrivers": "Önerilen sürücüler"
+ },
+ "driverAddFilter": "Filtre ekle",
+ "driverApplicableDevices": "Geçerli cihazlar",
+ "driverApprovalStatus": "Durum",
+ "driverBulkActions": "Toplu eylemler",
+ "driverClass": "Sürücü sınıfı",
+ "driverCount": "{0} - {1} / {2} arası kayıtlar gösteriliyor",
+ "driverFilterNoneSelected": "Hiçbiri seçilmedi",
+ "driverManufacturer": "Üretici",
+ "driverName": "Sürücü adı",
+ "driverNameLower": "windows sürücü güncelleştirmesi dağıtımı",
+ "driverNameUpper": "Windows sürücü güncelleştirmesi dağıtımı",
+ "driverRefresh": "Yenile",
+ "driverReleaseDate": "Sürüm tarihi",
+ "driverSearch": "Ara",
+ "driverSearchKeyword": "Arama anahtar sözcüğünü girin",
+ "driverVersion": "Sürüm",
+ "firstDeploymentDate": "İlk Dağıtım",
+ "infoBoxText": "Bir ilke atandıktan ve oluşturulduktan sonra envanterin doldurulması 24 saate kadar sürebilir.",
+ "textBlockText": "İlke onayınızı ve dağıtım ayarlarınızı seçin. Güncelleştirmeleri otomatik olarak veya kendiniz onaylayıp dağıtmak için bir ilke ayarlamayı seçin. Onay yöntemi bir ilke oluşturulduktan sonra değiştirilemez, ancak sürücü onaylarına ve dağıtım ayrıntılarına tek tek yapılan değişiklikler, atanan cihazlar için bir envanter oluşturulduğunda mümkün olacaktır."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge yapılandırma ayarları",
+ "edgeWindowsDataProtectionSettings": "Edge (Windows) veri koruma ayarları - Önizleme",
+ "edgeWindowsSettings": "Edge (Windows) yapılandırma ayarları - Önizleme",
+ "generalAppConfig": "Genel uygulama yapılandırması",
+ "generalSettings": "Genel yapılandırma ayarları",
+ "outlookSMIMEConfig": "Outlook S/MIME ayarları",
+ "outlookSettings": "Outlook yapılandırma ayarları",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-zh-chs.json b/Documentation/Strings-zh-chs.json
index c699d0c..694fc4d 100644
--- a/Documentation/Strings-zh-chs.json
+++ b/Documentation/Strings-zh-chs.json
@@ -1,4 +1,1691 @@
{
+ "InstallContextType": {
+ "device": "Device",
+ "deviceContext": "Device context",
+ "user": "User",
+ "userContext": "User context"
+ },
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "One block action is required for all compliance policies.",
+ "graceperiod": "Schedule (days after noncompliance)",
+ "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
+ "subtitle": "Specify action parameters",
+ "title": "Action parameters"
+ },
+ "List": {
+ "gracePeriodDay": "{0} day after noncompliance",
+ "gracePeriodDays": "{0} days after noncompliance",
+ "gracePeriodHour": "{0} hour after noncompliance",
+ "gracePeriodHours": "{0} hours after noncompliance",
+ "gracePeriodMinute": "{0} minute after noncompliance",
+ "gracePeriodMinutes": "{0} minutes after noncompliance",
+ "immediately": "Immediately",
+ "schedule": "Schedule",
+ "scheduleInfoBalloon": "Days after noncompliance",
+ "subtitle": "Specify the sequence of actions on noncompliant devices",
+ "title": "Actions"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Others",
+ "additionalRecipients": "Additional recipients (via email)",
+ "additionalRecipientsBladeTitle": "Select additional recipients",
+ "emailAddressPrompt": "Enter email addresses (separated by commas)",
+ "invalidEmail": "Invalid email address",
+ "messageTemplate": "Message template",
+ "noneSelected": "None selected",
+ "notSelected": "Not selected",
+ "numSelected": "{0} selected",
+ "selected": "Selected"
+ },
+ "block": "Mark device noncompliant",
+ "lockDevice": "Lock device (local action)",
+ "lockDeviceWithPasscode": "Lock device (local action)",
+ "noAction": "No action",
+ "noActionRow": "No actions, select 'Add' to add an action",
+ "pushNotification": "Send push notification to end user",
+ "remoteLock": "Remotely lock the noncompliant device",
+ "removeSourceAccessProfile": "Remove source access profile",
+ "retire": "Add device to retire list",
+ "wipe": "Wipe",
+ "emailNotification": "Send email to end user"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Admin Groups",
+ "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
+ "rolesMenuTitle": "Endpoint Manager roles",
+ "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
+ "RoleAssignmentScope": "Scope Groups"
+ },
+ "AppInformationTab": {
+ "Info": {
+ "AppStoreUrl": {
+ "android": "Enter the link to the app listing in Google Play store. For example:",
+ "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
+ "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
+ "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
+ "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
+ "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
+ "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ },
+ "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
+ "applicableDeviceType": "Select the device types that can install this app.",
+ "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
+ "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
+ "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
+ "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
+ "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
+ "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
+ "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
+ "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
+ "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
+ "learnMore": "Learn more",
+ "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
+ "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
+ "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
+ "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
+ "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
+ "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
+ "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
+ "packageId": "The app Package Identifier is the unique value that identifies the app.",
+ "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
+ "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
+ "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
+ "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
+ "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
+ "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
+ "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
+ "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
+ "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
+ "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
+ },
+ "descriptionPreview": "Preview",
+ "descriptionRequired": "Description is required.",
+ "editDescription": "Edit Description",
+ "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
+ "name": "App information",
+ "nameForOfficeSuitApp": "App suite information"
+ },
+ "ScopeTypes": {
+ "allDevices": "All Devices",
+ "allUsers": "All Users",
+ "allUsersAndDevices": "All Users & All Devices",
+ "selectedGroups": "Selected Groups"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Description",
+ "placeholder": "Enter a description"
+ },
+ "NameTextBox": {
+ "label": "Name",
+ "placeholder": "Enter a name"
+ },
+ "PublisherTextBox": {
+ "label": "Publisher",
+ "placeholder": "Enter a publisher"
+ },
+ "VersionTextBox": {
+ "label": "Version"
+ },
+ "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
+ },
+ "ScopeTags": {
+ "headerDescription": "Select one or more groups to assign the script package."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Detection script",
+ "placeholder": "Input script text",
+ "requiredValidationMessage": "Please enter the detection script"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Enforce script signature check"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Run this script using the logged-on credentials"
+ },
+ "RemediationScript": {
+ "infoBox": "This script will run in detect-only mode because there is no remediation script."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Remediation script",
+ "placeholder": "Input script text"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Run script in 64-bit PowerShell"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
+ },
+ "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
+ "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
+ },
+ "title": "Create custom script",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Interval",
+ "time": "Date and time"
+ },
+ "Interval": {
+ "day": "Repeats every day",
+ "days": "Repeats every {0} days",
+ "hour": "Repeats every hour",
+ "hours": "Repeats every {0} hours",
+ "month": "Repeats every month",
+ "months": "Repeats every {0} months",
+ "week": "Repeats every week",
+ "weeks": "Repeats every {0} weeks"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) on {1}",
+ "withDate": "{0} on {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Edit - {0}"
+ }
+ },
+ "MinimumOperatingSystem": {
+ "Android": {
+ "v10": "Android 10.0",
+ "v11": "Android 11.0",
+ "v4": "Android 4.0 (Ice Cream Sandwich)",
+ "v403": "Android 4.0.3 (Ice Cream Sandwich)",
+ "v41": "Android 4.1 (Jelly Bean)",
+ "v42": "Android 4.2 (Jelly Bean)",
+ "v43": "Android 4.3 (Jelly Bean)",
+ "v44": "Android 4.4 (KitKat)",
+ "v5": "Android 5.0 (Lollipop)",
+ "v51": "Android 5.1 (Lollipop)",
+ "v6": "Android 6.0 (Marshmallow)",
+ "v7": "Android 7.0 (Nougat)",
+ "v71": "Android 7.1 (Nougat)",
+ "v8": "Android 8.0 (Oreo)",
+ "v81": "Android 8.1 (Oreo)",
+ "v9": "Android 9.0 (Pie)"
+ },
+ "IOS": {
+ "v10": "iOS 10.0",
+ "v11": "iOS 11.0",
+ "v12": "iOS 12.0",
+ "v13": "iOS 13.0",
+ "v14": "iOS 14.0",
+ "v15": "iOS 15.0",
+ "v16": "iOS 16.0",
+ "v17": "iOS 17.0",
+ "v8": "iOS 8.0",
+ "v9": "iOS 9.0"
+ },
+ "MacOS": {
+ "V10": {
+ "10": "OS X Yosemite 10.10",
+ "11": "OS X El Capitan 10.11",
+ "12": "macOS Sierra 10.12",
+ "13": "macOS High Sierra 10.13",
+ "14": "macOS Mojave 10.14",
+ "15": "macOS Catalina 10.15",
+ "7": "Mac OS X Lion 10.7",
+ "8": "OS X Mountain Lion 10.8",
+ "9": "OS X Mavericks 10.9"
+ },
+ "V11": {
+ "0": "macOS Big Sur 11.0"
+ },
+ "V12": {
+ "0": "macOS Monterey 12.0"
+ },
+ "V13": {
+ "0": "macOS Ventura 13.0"
+ },
+ "V14": {
+ "0": "macOS Sonoma 14.0"
+ }
+ },
+ "Windows": {
+ "V10Release": {
+ "release1607": "Windows 10 1607",
+ "release1703": "Windows 10 1703",
+ "release1709": "Windows 10 1709",
+ "release1803": "Windows 10 1803",
+ "release1809": "Windows 10 1809",
+ "release1903": "Windows 10 1903",
+ "release1909": "Windows 10 1909",
+ "release2004": "Windows 10 2004",
+ "release21H1": "Windows 10 21H1",
+ "release21H2": "Windows 10 21H2",
+ "release22H2": "Windows 10 22H2",
+ "release2H20": "Windows 10 20H2"
+ },
+ "V11Release": {
+ "release21H2": "Windows 11 21H2",
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
+ },
+ "v10": "Windows 10.0",
+ "v80": "Windows 8.0",
+ "v81": "Windows 8.1"
+ },
+ "WindowsPhone": {
+ "v80": "Windows Phone 8.0",
+ "v81": "Windows Phone 8.1"
+ }
+ },
+ "OfficeUpdateChannel": {
+ "current": "Current Channel",
+ "deferred": "Semi-Annual Enterprise Channel",
+ "firstReleaseCurrent": "Current Channel (Preview)",
+ "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
+ "monthlyEnterprise": "Monthly Enterprise Channel",
+ "placeHolder": "Select one"
+ },
+ "TableHeaders": {
+ "activity": "Activity",
+ "activityName": "Activity name",
+ "actor": "Initiated by (actor)",
+ "actorType": "Actor type",
+ "app": "App",
+ "appName": "App name",
+ "applicationName": "Application name",
+ "approvalType": "Approval method",
+ "assignedGroups": "Group",
+ "assignment": "Assignment",
+ "assignmentStatus": "Assigned",
+ "assignments": "Assignments",
+ "attributeName": "Attribute name",
+ "attributeType": "Attribute type",
+ "bundleId": "Bundle-Id",
+ "category": "Category",
+ "complianceGracePeriodExpiration": "Compliance grace period expiration",
+ "configurationType": "Profile type",
+ "conflictingPolicy": "Conflicting Policies",
+ "createdDate": "Created date",
+ "currentOs": "Current OS",
+ "date": "Date",
+ "dateRange": "Date range",
+ "deployed": "Deployed",
+ "description": "Description",
+ "device": "Device",
+ "deviceId": "Device ID",
+ "deviceName": "Device name",
+ "deviceOrApplicationName": "Device or application name",
+ "deviceReporting": "Devices reporting",
+ "diagnosticCode": "Diagnostic Code",
+ "diagnosticText": "Diagnostic Text",
+ "diagnostics": "Diagnostics",
+ "displayName": "Display name",
+ "driversToReview": "Drivers to review",
+ "eSIMActivationStatus": "Activation status",
+ "eSIMCellularStatus": "Cellular status",
+ "eSIMICCID": "ICCID",
+ "eSIMPoolName": "Cellular subscription",
+ "eSIMState": "eSIM state",
+ "eSIMTokenAmount": "Total eSIM activation codes",
+ "enabled": "Enabled",
+ "enabledPlatforms": "Enabled Platforms",
+ "encryptionReadiness": "Encryption Readiness",
+ "encryptionStatus": "Encryption Status",
+ "endTime": "End time",
+ "enrollment": "Enrollment",
+ "enrollmentAttempt": "Enrollment start",
+ "eventDateTime": "Timestamp",
+ "eventIdentifier": "Event ID",
+ "eventLevel": "Level",
+ "excluded": "Excluded",
+ "failure": "Failure",
+ "featureUpdateDeferral": "Feature Deferral",
+ "featureUpdateVersion": "Feature Update Version",
+ "featureUpdatesPaused": "Feature (Paused)",
+ "featureUpdatesStatus": "Feature",
+ "from": "From",
+ "groups": "Groups",
+ "groupsSelected": "Groups Selected",
+ "installationStatus": "Installation Status",
+ "issueId": "Issue id",
+ "lastCheckinTime": "Last Check-in Time",
+ "lastModified": "Last modified",
+ "lastScanTime": "Last Scan Time",
+ "lastSuccessfulSync": "Last Successful Sync",
+ "lastUpdated": "Last Updated",
+ "location": "Location",
+ "loggedInUser": "Logged in user",
+ "message": "Message",
+ "model": "Model",
+ "mtdConnector": "MTD Connector",
+ "name": "Profile name",
+ "oSVersion": "OS Version",
+ "operationType": "Operation type",
+ "os": "OS",
+ "packageName": "Package name",
+ "partnerName": "Partner",
+ "partnerStatus": "Partner status",
+ "permission": "Permission",
+ "platform": "Platform",
+ "policies": "Policies",
+ "policy": "Policy",
+ "policyType": "Policy type",
+ "preventedUpdateDays": "Restricted days",
+ "priority": "Priority",
+ "profiles": "Profiles",
+ "publicAddress": "Public address",
+ "publisher": "Publisher",
+ "qualityUpdateDeferral": "Quality Deferral",
+ "qualityUpdateRelease": "Quality Update Release",
+ "qualityUpdateVersion": "Quality Update Version",
+ "qualityUpdatesPaused": "Quality (Paused)",
+ "qualityUpdatesStatus": "Quality",
+ "reason": "Reason",
+ "resource": "Resource",
+ "roleName": "Name",
+ "roles": "Roles",
+ "scopeGroups": "Scope groups",
+ "scopeSize": "Assigned Scope Groups",
+ "scopeTags": "Scope tags",
+ "scriptName": "Script name",
+ "scriptType": "Script type",
+ "servicingOption": "Servicing channel",
+ "setting": "Setting",
+ "settings": "Settings",
+ "siteName": "Site name",
+ "source": "Source",
+ "sourceProfile": "Source Profile",
+ "startTime": "Start time",
+ "state": "State",
+ "stateDetails": "State details",
+ "status": "Status",
+ "subject": "Subject",
+ "support": "Support",
+ "supportEndDate": "Support End Date",
+ "tPMVersion": "TPM Version",
+ "target": "Target",
+ "timeWindows": "Time windows",
+ "timeZone": "Time zone",
+ "type": "Type",
+ "updateScheduleType": "Schedule type",
+ "updateStatus": "Update Status",
+ "user": "User",
+ "userPrincipalName": "User principal name",
+ "users": "Users",
+ "usersExcluded": "Users excluded",
+ "usersTargeted": "Users targeted",
+ "value": "Value",
+ "includedGroups": "Included Groups",
+ "excludedGroups": "Excluded Groups",
+ "licenseType": "License type"
+ },
+ "Inputs": {
+ "accountDomain": "Account domain",
+ "accountDomainHint": "e.g. contosodomain",
+ "accountDomainInfoBalloon": "Specify the user’s account domain.",
+ "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
+ "allowContactSetting": "Allow user to change contact setting",
+ "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
+ "allowUserChange": "Allow user to change setting",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
+ "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "App install context",
+ "appUrlLabel": "Appstore URL",
+ "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Applicable device type",
+ "assignmentActionLabel": "Mode",
+ "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
+ "authenticationMetod": "Authentication method",
+ "authenticationType": "Authentication type",
+ "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
+ "availableLicenseCount": "Available licenses",
+ "basicAuth": "Basic authentication",
+ "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
+ "bookNameLabel": "Book name",
+ "bundleDescriptionHint": "Enter a description that describes the apps included.",
+ "calendar": "Calendar",
+ "categoryLabel": "Category",
+ "categoryNameLabel": "Default name",
+ "certProfileType": "Certificate profile type",
+ "certificate": "Certificate",
+ "certificates": "Certificates",
+ "commandLineLabel": "Command-line arguments",
+ "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
+ "configurationSettingsFormatLabel": "Configuration settings format",
+ "configurationSettingsLabel": "Settings format",
+ "contactSync": "Save Contacts",
+ "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
+ "contacts": "Contacts",
+ "createdDateTime": "Created",
+ "defaultCategoryHint": "Default categories cannot be changed",
+ "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
+ "descriptionGenericLabel": "Description",
+ "descriptionHint": "Enter a description...",
+ "descriptionLabel": "Description",
+ "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
+ "developerLabel": "Developer",
+ "developerSizeHint": "The maximum length of the developer name is 256 characters.",
+ "disable": "Disable",
+ "disabled": "Disabled",
+ "displayNameLabel": "Name",
+ "displayVersionHint": "Enter the app version",
+ "displayVersionLabel": "App Version",
+ "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
+ "eBookCategoryNameLabel": "Default name",
+ "emailAccount": "Email account name",
+ "emailAccountHint": "e.g. Corporate Email",
+ "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
+ "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
+ "emailServer": "Email Server",
+ "emailServerHint": "e.g. mail.contoso.com",
+ "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
+ "enable": "Enable",
+ "enableSMime": "Enable S/MIME",
+ "enabled": "Enabled",
+ "encryptAllEmails": "Encrypt all emails",
+ "encryptionCertificates": "Encryption certificates",
+ "endUserNotifications": "End-user notifications",
+ "enrollmentTypeLabel": "Device enrollment type",
+ "externalRecipients": "External recipients MailTip",
+ "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
+ "focusedInbox": "Focused Inbox",
+ "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
+ "fullScreenEnabledLabel": "Full screen",
+ "gmailNineAmountOfEmail": "Amount of email to synchronize",
+ "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
+ "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
+ "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
+ "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
+ "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
+ "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
+ "ignoreManifestScope": "Ignore manifest scope",
+ "ignoreVersionDetection": "Ignore app version",
+ "informationUrlLabel": "Information URL",
+ "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
+ "installAsManaged": "Install as managed",
+ "installationSourceLabel": "App type",
+ "installerTypeInfoBalloon": "The installer type of the application package.",
+ "installerTypeLabel": "Installer Type",
+ "isFeatured": "Show this as a featured app in the Company Portal",
+ "isMAMEnabledToggleLabel": "Yes",
+ "lastModifiedDateTime": "Last updated Time",
+ "ldapUrl": "LDAP URL",
+ "licensingType": "Supports device context assignment",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimum operating system",
+ "modernAuth": "Modern authentication",
+ "nameHint": "Enter a name",
+ "nameLabel": "Name",
+ "nameSizeHint": "The maximum length of the name is 512 characters.",
+ "notConfigured": "Not configured",
+ "notesLabel": "Notes",
+ "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
+ "notificationType": "Notification type",
+ "oneDay": "One Day",
+ "oneMonth": "One Month",
+ "oneWeek": "One Week",
+ "outlookSMimeSettings": "Outlook S/MIME settings",
+ "ownerLabel": "Owner",
+ "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
+ "packageIdLabel": "Package Identifier",
+ "packageNameLabel": "Package name",
+ "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
+ "platformLabel": "Platform",
+ "policyDescriptionLabel": "Description",
+ "policyNameLabel": "Name",
+ "preComposedIconEnabled": "Precomposed",
+ "primarySMTPAddress": "Primary SMTP Address",
+ "privacyUrlLabel": "Privacy URL",
+ "publisherHint": "Enter a publisher name",
+ "publisherLabel": "Publisher",
+ "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
+ "require": "Require",
+ "requireBiometrics": "Require Biometrics to access app",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "At least one scope tag is required",
+ "searchAppLabel": "Select app",
+ "searchAppLinkText": "Search the App Store",
+ "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
+ "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
+ "selectAAD": "Select a Microsoft Entra attribute",
+ "selectAppFileLabel": "Select file",
+ "selectAppFileLinkText": "Select app package file",
+ "selectAppFileToUpdateLabel": "Select file to update",
+ "selectAuthMethod": "Select an authentication method",
+ "selectAuthType": "Select an authentication type",
+ "selectCatalogAppLabel": "Select app",
+ "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
+ "selectCertificate": "Select a certificate",
+ "signAllEmails": "Sign all emails",
+ "signingCertificates": "Signing certificates",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Suite Description",
+ "suiteNameLabel": "Suite Name",
+ "targetApplicationBundleIdentifier": "Target application bundle identifier",
+ "targetedPlatformsLabel": "Targeted platform",
+ "tasks": "Tasks",
+ "threeDays": "Three Days",
+ "totalLicenseCount": "Total licenses",
+ "twoWeeks": "Two Weeks",
+ "unifiedAssignmentsLabel": "Assign to:",
+ "unlimited": "Unlimited",
+ "urlHint": "Enter a valid url",
+ "useManagedBrowserHint": "Android and iOS only. Learn more",
+ "useManagedBrowserLabel": "Require a managed browser to open this link",
+ "userPrinicipalName": "User Principal Name",
+ "username": "Username",
+ "usernameAttribute": "Username attribute from Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
+ "usernamePassword": "Username and password",
+ "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
+ "webAppUrlLabel": "App URL",
+ "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
+ "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "XML Data Entered",
+ "xmlFormatInvalid": "XML policy format is invalid.",
+ "xmlTooLarge": "Input size must be less than 1 MB."
+ },
+ "CoManagementAuthority": {
+ "Confirmation": {
+ "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
+ "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
+ },
+ "Grid": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
+ "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
+ "label": "Co-management authority"
+ },
+ "Header": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
+ },
+ "Main": {
+ "title": "Co-management Authority"
+ },
+ "MessageSaved": {
+ "body": "Co-management authority policy created."
+ },
+ "Notification": {
+ "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
+ "created": "This Co-management authority policy has not been assigned to any users.",
+ "creating": "Creating Co-management authority policy",
+ "creatingMessage": "Creating {0} Co-management authority policy",
+ "deleteError": "An error occurred while deleting Co-management authority policy",
+ "deleted": "Co-management authority policy deleted.",
+ "deletedMessage": "{0} Co-management authority policy is deleted.",
+ "deleting": "Deleting Co-management Authority policy",
+ "deletingMessage": "Deleting {0} Co-management Authority policy",
+ "fetchError": "An error occurred while displaying Co-management authority policies",
+ "saved": "Co-management Authority saved.",
+ "savedMessage": "{0} Co-management Authority policy successfully saved.",
+ "saving": "Saving Co-management authority",
+ "savingMessage": "Saving {0} Co-management authority policy"
+ },
+ "Priority": {
+ "saveError": "An error occurred while saving Co-management authority priorities",
+ "saved": "Co-management authority priorities were successfully saved."
+ },
+ "ReloadNotification": {
+ "description": "Reload the Co-management authority policy to try again.",
+ "title": "Reload the Co-management authority blade"
+ },
+ "advancedProperty": "Advanced",
+ "commandLineArgs": "Client installation command line arguments.",
+ "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
+ "enterArgument": "Enter argument",
+ "installAgent": "Automatically install Configuration Manager agent.",
+ "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
+ "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
+ "pageDescription": "Co-management authority profiles",
+ "pageSetting": "Co-management authority Setting",
+ "pageTitle": "Co-management authority",
+ "settingDescription": "The co-management settings determine who owns the workloads."
+ },
+ "AzureIAMCommon": {
+ "Recommended": "Recommended",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrain",
+ "countryNameZA": "South Africa",
+ "countryNameJO": "Jordan",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Czech Republic",
+ "countryNameLT": "Lithuania",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hong Kong SAR",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Saudi Arabia",
+ "countryNamePG": "Papua New Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "India",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Romania",
+ "countryNameKZ": "Kazakhstan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Georgia",
+ "countryNameTT": "Trinidad and Tobago",
+ "countryNameMP": "Northern Mariana Islands",
+ "countryNameMV": "Maldives",
+ "countryNameFI": "Finland",
+ "countryNameNO": "Norway",
+ "countryNameEE": "Estonia",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Uzbekistan",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tajikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "France",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italy",
+ "countryNameAZ": "Azerbaijan",
+ "countryNameKG": "Kyrgyzstan",
+ "countryNameWF": "Wallis and Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falkland Islands (Islas Malvinas)",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "South Sudan",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Syria",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "Saint Vincent and the Grenadines",
+ "countryNameID": "Indonesia",
+ "countryNameRE": "Reunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "North Macedonia",
+ "countryNameTG": "Togo",
+ "countryNamePF": "French Polynesia",
+ "countryNameKY": "Cayman Islands",
+ "countryNameIO": "British Indian Ocean Territory",
+ "countryNameRU": "Russia",
+ "countryNameMA": "Morocco",
+ "countryNameAU": "Australia",
+ "countryNameBO": "Bolivia",
+ "countryNameVA": "Holy See (Vatican City State)",
+ "countryNameVG": "Virgin Islands, British",
+ "countryNameFM": "Micronesia",
+ "countryNameAQ": "Antarctica",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brazil",
+ "countryNameIS": "Iceland",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgaria",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamas, The",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macao SAR",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "American Samoa",
+ "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
+ "countryNameMF": "Saint Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "New Caledonia",
+ "countryNameAC": "Ascension Island",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladesh",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Canada",
+ "countryNameSH": "Saint Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolia",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Cameroon",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japan",
+ "countryNameCY": "Cyprus",
+ "countryNameCD": "Democratic Republic of Congo",
+ "countryNameTN": "Tunisia",
+ "countryNameTR": "Türkiye",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Sweden",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Cambodia",
+ "countryNamePL": "Poland",
+ "countryNameDZ": "Algeria",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Egypt",
+ "countryNameGF": "French Guiana",
+ "countryNameNZ": "New Zealand",
+ "countryNamePS": "Palestinian Authority",
+ "countryNameIL": "Israel",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Greece",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauritania",
+ "countryNameVI": "Virgin Islands, U.S.",
+ "countryNameGQ": "Equatorial Guinea",
+ "countryNameMX": "Mexico",
+ "countryNameDJ": "Djibouti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "China",
+ "countryNameMZ": "Mozambique",
+ "countryNameBV": "Bouvet Island",
+ "countryNameNF": "Norfolk Island",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "South Georgia and the South Sandwich Islands",
+ "countryNameRS": "Serbia",
+ "countryNameCC": "Cocos (Keeling) Islands",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Germany",
+ "countryNameCG": "Republic of Congo",
+ "countryNameKW": "Kuwait",
+ "countryNameMH": "Marshall Islands",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarus",
+ "countryNameMY": "Malaysia",
+ "countryNameST": "São Tomé and Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Chad",
+ "countryNameCX": "Christmas Island",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bissau",
+ "countryNameUA": "Ukraine",
+ "countryNameCU": "Cuba",
+ "countryNameCO": "Colombia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Croatia",
+ "countryNameSC": "Seychelles",
+ "countryNameNL": "Netherlands",
+ "countryNameUM": "US Minor Outlying Islands",
+ "countryNameIM": "Isle of Man",
+ "countryNameFJ": "Fiji",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "United Kingdom",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovenia",
+ "countryNameAM": "Armenia",
+ "countryNameAR": "Argentina",
+ "countryNamePM": "Saint Pierre and Miquelon",
+ "countryNameTF": "French Southern and Antarctic Lands",
+ "countryNameDO": "Dominican Republic",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "Central African Republic",
+ "countryNameBE": "Belgium",
+ "countryNameKM": "Comoros",
+ "countryNameLY": "Libya",
+ "countryNameIE": "Ireland",
+ "countryNameKP": "North Korea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slovakia",
+ "countryNameTC": "Turks and Caicos Islands",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Yemen",
+ "countryNameBA": "Bosnia and Herzegovina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Iraq",
+ "countryNameSJ": "Svalbard and Jan Mayen Island",
+ "countryNameAX": "Åland Islands",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Faroe Islands",
+ "countryNameBL": "Saint Barthélemy",
+ "countryNameLB": "Lebanon",
+ "countryNameJM": "Jamaica",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Spain",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapore",
+ "countryNameAL": "Albania",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d’Ivoire",
+ "countryNameTW": "Taiwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cook Islands",
+ "countryNameTH": "Thailand",
+ "countryNameHM": "Heard Island and McDonald Islands",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "United States",
+ "countryNameAT": "Austria",
+ "countryNameKR": "Korea, Republic of",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Denmark",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Ethiopia",
+ "countryNameMG": "Madagascar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxembourg",
+ "countryNameQA": "Qatar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Solomon Islands",
+ "countryNameAE": "United Arab Emirates",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua and Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Hungary",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Switzerland",
+ "countryNamePN": "Pitcairn Islands",
+ "countryNameGL": "Greenland",
+ "countryNamePH": "Philippines",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts and Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Latvia",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Author",
+ "template": "Template name"
+ },
+ "Row": {
+ "ariaLabel": "row {0} of {1} column {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Start from scratch and select settings you want from the library of available settings",
+ "title": "Settings catalog"
+ },
+ "Templates": {
+ "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
+ "title": "Templates"
+ },
+ "noData": "No policy templates found"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Endpoint detection and response"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "App and browser isolation",
+ "aSRApplicationControl": "Application control",
+ "aSRAttackSurfaceReduction": "Attack surface reduction rules",
+ "aSRDeviceControl": "Device control",
+ "aSRExploitProtection": "Exploit protection",
+ "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
+ "aVExclusions": "Microsoft Defender Antivirus exclusions",
+ "antivirus": "Microsoft Defender Antivirus",
+ "cloudPC": "Windows 365 Security Baseline",
+ "default": "Endpoint Security",
+ "defenderTest": "Microsoft Defender for Endpoint demo",
+ "diskEncryption": "BitLocker",
+ "eDR": "Endpoint detection and response",
+ "edgeSecurityBaseline": "Microsoft Edge baseline",
+ "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
+ "editionUpgradeConfiguration": "Edition upgrade and mode switch",
+ "firewall": "Windows Firewall",
+ "firewallRules": "Windows Firewall rules",
+ "identityProtection": "Account protection",
+ "identityProtectionPreview": "Account protection (preview)",
+ "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
+ "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
+ "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
+ "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS firewall",
+ "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
+ "office365Baseline": "Microsoft Office O365 baseline",
+ "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
+ "securityBaselines": "Security Baselines",
+ "test": "Test Template",
+ "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
+ "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
+ "windowsSecurityExperience": "Windows Security experience"
+ },
+ "Firewall": {
+ "mDE": "Windows Firewall"
+ },
+ "FirewallRules": {
+ "mDE": "Windows Firewall Rules"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Account Protection",
+ "administrativeTemplates": "Administrative Templates",
+ "androidCompliancePolicy": "Android compliance policy",
+ "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
+ "applicationControl": "App Control for Business",
+ "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
+ "bitlocker": "BitLocker",
+ "custom": "Custom",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedPersonalIdentityVerificationCredential": "Derived credential",
+ "deviceControl": "Device Control",
+ "deviceFeatures": "Device features",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Device Lock",
+ "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
+ "deviceRestrictions": "Device restrictions",
+ "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
+ "domainJoinPreview": "Domain Join",
+ "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
+ "education": "Education",
+ "email": "Email",
+ "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
+ "endpointProtection": "Endpoint protection",
+ "expeditedCheckin": "Mobile device management configuration",
+ "exploitProtection": "Exploit Protection",
+ "extensions": "Extensions",
+ "hardwareConfigurations": "BIOS Configurations and other settings",
+ "identityProtection": "Identity protection",
+ "iosCompliancePolicy": "iOS compliance policy",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Local user group membership",
+ "macCompliancePolicy": "Mac compliance policy",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
+ "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
+ "microsoftDefenderFirewallRules": "Windows Firewall Rules",
+ "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
+ "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
+ "mxProfileZebraOnly": "MX profile (Zebra only)",
+ "networkBoundary": "Network boundary",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Override Group Policy",
+ "pkcsCertificate": "PKCS certificate",
+ "pkcsImportedCertificate": "PKCS imported certificate",
+ "preferenceFile": "Preference file",
+ "presets": "Presets",
+ "scepCertificate": "SCEP certificate",
+ "secureAssessmentEducation": "Secure assessment (Education)",
+ "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
+ "settingsCatalog": "Settings Catalog",
+ "sharedMultiUserDevice": "Shared multi-user device",
+ "softwareUpdates": "Software Updates",
+ "trustedCertificate": "Trusted certificate",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi import",
+ "windows10CompliancePolicy": "Windows 10/11 compliance policy",
+ "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
+ "windows10XScep": "SCEP certificate - TEST",
+ "windows10XTrustedCertificate": "Trusted certificate - TEST",
+ "windows10XVPN": "VPN - TEST",
+ "windows10XWifi": "WIFI - TEST",
+ "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
+ "windows365SecurityBaseline": "Windows 365 Security Baseline",
+ "windows8CompliancePolicy": "Windows 8 compliance policy",
+ "windowsHealthMonitoring": "Windows health monitoring",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
+ "windowsUpdateforBusiness": "Windows Update for Business",
+ "wiredNetwork": "Wired network",
+ "workProfile": "Personally-owned work profile"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Make update available gradually",
+ "immediateStart": "Make update available as soon as possible",
+ "startDateOnly": "Make update available on a specific date"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Auto deny",
+ "autoGrant": "Auto grant",
+ "prompt": "Prompt"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Location access (coarse)",
+ "accessFineLocation": "Location access (fine)",
+ "addVoicemail": "Add voicemail",
+ "bodySensors": "Allow body sensor data",
+ "bodySensorsBackground": "Allow background body sensor data",
+ "callPhone": "Make phone calls",
+ "camera": "Camera",
+ "getAccounts": "Get accounts",
+ "nearbyDevices": "Nearby Devices",
+ "nearbyWifiDevices": "Nearby Wifi Devices",
+ "postNotifications": "Post notifications",
+ "processOutgoingCalls": "Process outgoing calls",
+ "readCalendar": "Calendar (read)",
+ "readCallLog": "Call log (read)",
+ "readContacts": "Contacts (read)",
+ "readExternalStorage": "External storage (read)",
+ "readMediaAudio": "Media Audio (read)",
+ "readMediaImages": "Media Images (read)",
+ "readMediaVideo": "Media Video (read)",
+ "readPhoneState": "Phone state (read)",
+ "readSMS": "SMS (read)",
+ "receiveMMS": "MMS (receive)",
+ "receiveSMS": "SMS (receive)",
+ "receiveWAPPush": "WAP push messages (receive)",
+ "recordAudio": "Record audio",
+ "sendSMS": "SMS (send)",
+ "useSIP": "Use SIP service",
+ "writeCalendar": "Calendar (write)",
+ "writeCallLog": "Call log (write)",
+ "writeContacts": "Contacts (write)",
+ "writeExternalStorage": "External storage (write)"
+ },
+ "RemoveDialog": {
+ "description": "Are you sure you want to remove the permission?",
+ "title": "Remove"
+ },
+ "TableHeader": {
+ "permission": "Permission",
+ "permissionGroup": "Permission group",
+ "permissionName": "Permission name",
+ "permissionState": "Permission state"
+ },
+ "addButtonLabel": "+Add",
+ "addPermissionTableDescription": "Specify permissions you want to override. If they are not chosen/specified explicitly, then the default behavior will apply.",
+ "addPermissionsTitle": "Add permissions",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Learn more about Android runtime permissions",
+ "permissionTableDescription": "Permissions granted here will override the “Default app permissions” policy for the selected apps.",
+ "permissionsTitle": "Permissions"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search as default",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype for Business",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "The file or folder as the selected requirement.",
+ "pathToolTip": "The complete path of the file or folder to detect.",
+ "property": "Property",
+ "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "GridColumns": {
+ "pathOrScript": "Path/Script",
+ "type": "Type"
+ },
+ "Registry": {
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the comparison.",
+ "registryRequirement": "Registry key requirement",
+ "registryRequirementTooltip": "Select the registry key requirement comparison.",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the required registry value."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "File",
+ "registry": "Registry",
+ "script": "Script"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Boolean",
+ "dateTime": "Date and Time",
+ "float": "Floating Point",
+ "integer": "Integer",
+ "string": "String",
+ "version": "Version"
+ },
+ "duplicateName": "Script name {0} has already been used. Please enter a different name.",
+ "enforceSignatureCheck": "Enforce script signature check",
+ "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
+ "loggedOnCredentials": "Run this script using the logged on credentials",
+ "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
+ "operatorTooltip": "Select the operator for the requirement comparison.",
+ "requirementMethod": "Select output data type",
+ "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
+ "scriptName": "Script name",
+ "value": "Value",
+ "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "bladeTitle": "Add a Requirement rule",
+ "createRequirementHeader": "Create a requirement.",
+ "header": "Configure additional requirement rules",
+ "label": "Additional requirement rules",
+ "noRequirementsSelectedPlaceholder": "No requirements are specified.",
+ "requirementType": "Requirement type",
+ "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
+ },
+ "architectures": "Operating system architecture",
+ "architecturesTooltip": "Choose the architectures needed to install the app.",
+ "bladeTitle": "Requirements",
+ "diskSpace": "Disk space required (MB)",
+ "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
+ "header": "Specify the requirements that devices must meet before the app is installed:",
+ "maximumTextFieldValue": "The value must be at most {0}.",
+ "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
+ "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
+ "minimumLogicalProcessors": "Minimum number of logical processors required",
+ "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
+ "minimumOperatingSystem": "Minimum operating system",
+ "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
+ "minumumTextFieldValue": "The value must be at least {0}.",
+ "physicalMemory": "Physical memory required (MB)",
+ "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
+ "selectorLabel": "Requirements",
+ "validNumber": "Please enter a valid number."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filter",
+ "assignmentFilterTypeColumnHeader": "Filter mode",
+ "assignmentToast": "End user notifications",
+ "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
+ "autoUpdate": "Auto-update",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
+ "groupTableHeader": "Group",
+ "installContextLabel": "Install Context",
+ "isRemovable": "Install as removable",
+ "licenseTypeLabel": "License type",
+ "modeTableHeader": "Group mode",
+ "policySet": "Policy Set",
+ "preventAutoAppUpdate": "Prevent automatic app updates",
+ "preventManagedAppBackup": "Prevent iCloud app backup",
+ "restartGracePeriodHeader": "Restart grace period",
+ "startTimeColumnLabel": "Availability",
+ "tracks": "Tracks",
+ "uninstallOnRemoval": "Uninstall on device removal",
+ "updateMode": "Update Priority",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD web app",
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office Suite",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeAddIn": "Office add-in",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "sharePointApp": "SharePoint app",
+ "teamsApp": "Teams app",
+ "webApp": "Web link",
+ "win32CatalogApp": "Windows catalog app (Win32)",
+ "winGetPublicApp": "Windows Package Manager Community Repository",
+ "winGetStoreApp": "Microsoft Store app (new)",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "AssignmentToast": {
+ "hideAll": "Hide all toast notifications",
+ "showAll": "Show all toast notifications",
+ "showReboot": "Show toast notifications for computer restarts"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Yes",
+ "notConfigured": "No"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "App install may force a device restart",
+ "basedOnReturnCode": "Determine behavior based on return codes",
+ "force": "Intune will force a mandatory device restart",
+ "suppress": "No specific action"
+ },
+ "FilterType": {
+ "exclude": "Exclude",
+ "include": "Include",
+ "none": "None"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "notApplicable": "Not applicable",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "SettingType": {
+ "assignmentType": "Assignment type",
+ "deviceLicensing": "License type",
+ "installContext": "Uninstall on device removal",
+ "toastSettings": "End user notifications",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Default",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Failed",
+ "hardReboot": "Hard reboot",
+ "retry": "Retry",
+ "softReboot": "Soft reboot",
+ "success": "Success"
+ },
+ "Columns": {
+ "codeType": "Code type",
+ "returnCode": "Return code"
+ },
+ "bladeTitle": "Return codes",
+ "gridAriaLabel": "Return codes",
+ "header": "Specify return codes to indicate post-installation behavior:",
+ "onAddAnnounceMessage": "Return code added item {0} of {1}",
+ "onDeleteSuccess": "Return code {0} deleted successfully",
+ "returnCodeAlreadyUsedValidation": "Return code is already used.",
+ "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
+ "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
+ "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
+ "selectorLabel": "Return codes"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone and iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Add network boundary",
+ "addNetworkBoundaryButton": "Add network boundary...",
+ "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
+ "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
+ "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
+ "boundaryType": "Boundary type",
+ "cloudResources": "Cloud resources",
+ "corporateIdentity": "Corporate identity",
+ "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
+ "editNetworkBoundary": "Edit network boundary",
+ "enrollmentState": "Enrollment state",
+ "iPv4Ranges": "IPv4 ranges",
+ "iPv6Ranges": "IPv6 ranges",
+ "internalProxyServers": "Internal proxy servers",
+ "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
+ "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
+ "mdmDiscoveryUrl": "MDM discovery URL",
+ "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
+ "minimumPinLength": "Set the minimum number of characters required for the PIN",
+ "name": "Name",
+ "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
+ "networkBoundary": "Network boundary",
+ "networkDomainNames": "Network domains",
+ "neutralResources": "Neutral resources",
+ "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
+ "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
+ "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
+ "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
+ "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
+ "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
+ "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
+ "protectedDomainNames": "Protected domains",
+ "proxyServers": "Proxy servers",
+ "requireAppPin": "Disable app PIN when device PIN is managed",
+ "requiredSettings": "Required settings",
+ "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
+ "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
+ "revokeOnUnenroll": "Revoke encryption keys on unenroll",
+ "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
+ "showWipIcon": "Show the enterprise data protection icon",
+ "type": "Type",
+ "useRmsForWip": "Use Azure RMS for WIP",
+ "value": "Value",
+ "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
+ "wipProtectionMode": "Windows Information Protection mode",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabic",
+ "bulgarian": "Bulgarian",
+ "chineseSimplified": "Chinese (Simplified)",
+ "chineseTraditional": "Chinese (Traditional)",
+ "croatian": "Croatian",
+ "czech": "Czech",
+ "danish": "Danish",
+ "dutch": "Dutch",
+ "englishUK": "English (United Kingdom)",
+ "englishUS": "English (United States)",
+ "estonian": "Estonian",
+ "finnish": "Finnish",
+ "frenchCanada": "French (Canada)",
+ "frenchFrance": "French (France)",
+ "german": "German",
+ "greek": "Greek",
+ "hebrew": "Hebrew",
+ "hungarian": "Hungarian",
+ "italian": "Italian",
+ "japanese": "Japanese",
+ "korean": "Korean",
+ "latvian": "Latvian",
+ "lithuanian": "Lithuanian",
+ "norwegian": "Norwegian, Bokmål",
+ "polish": "Polish",
+ "portugueseBrazil": "Portuguese (Brazil)",
+ "portuguesePortugal": "Portuguese (Portugal)",
+ "romanian": "Romanian",
+ "russian": "Russian",
+ "serbian": "Serbian",
+ "slovak": "Slovak",
+ "slovenian": "Slovenian",
+ "spanishMexico": "Spanish (Mexico)",
+ "spanishSpain": "Spanish (Spain)",
+ "swedish": "Swedish",
+ "thai": "Thailand",
+ "turkish": "Turkish",
+ "ukrainian": "Ukrainian"
+ },
+ "Summary": {
+ "placeholder": "Select a notification message from the left to preview contents."
+ },
+ "companyContact": "Show contact information",
+ "companyLogo": "Show company logo",
+ "companyName": "Show company name",
+ "createEditDescription": "Create or edit notification message templates.",
+ "createMessage": "Create message",
+ "deviceDetails": "Show device details",
+ "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
+ "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
+ "editMessage": "Edit message",
+ "email": "email",
+ "emailFooterTitle": "Email Footer",
+ "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
+ "emailHeaderTitle": "Email Header",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Configure Customization settings",
+ "formSubTitle": "Create or modify notification emails",
+ "headerFooterSettingsTab": "Header and footer settings",
+ "imgPreview": "Image Preview",
+ "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
+ "iwLink": "Show company portal website link",
+ "listEmpty": "No message templates.",
+ "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "listSubTitle": "List of notification message templates",
+ "listTitle": "Notification message templates",
+ "localizedNotificationMessageTemplates": "Localized notification message templates",
+ "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
+ "messageCapitalized": "Notification message template",
+ "messageLowercase": "notification message template",
+ "missingDefaultError": "Select a default template",
+ "notificationMessageTemplates": "Notification message templates",
+ "rowValidationError": "At least one message template is required",
+ "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "tenantValueText": "Tenant Value",
+ "testEmailLabel": "Send preview email",
+ "localeLabel": "Locale",
+ "isDefaultLocale": "Is Default"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Configure devices for initial provisioning.",
+ "title": "Device preparation"
+ },
+ "EnrollmentSettings": {
+ "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
+ "title": "Enrollment settings"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
+ "menuTitle": "Windows operating system recovery configuration"
+ },
+ "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
+ "coManagementAuthorityTitle": "Co-management Settings ",
+ "deploymentProfiles": "Windows Autopilot deployment profiles",
+ "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
+ "descriptionLabel": "Windows enrollment methods",
+ "enrollmentStatusPage": "Enrollment Status Page"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Select the number of bits contained in the key.",
+ "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
+ "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
+ "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
+ "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Subject alternative name",
+ "subjectNameFormat": "Subject name format",
+ "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
+ },
+ "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
+ "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
+ "configurationSettingsFormat": "Configuration settings format text",
+ "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
+ "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
+ "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
+ "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Select runtime permissions for the associated app.",
+ "policyAssociatedApp": "Select the app that this policy will be associated with.",
+ "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
+ "policyDescription": "Optionally, enter a description for this configuration policy.",
+ "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
+ "policyName": "Enter a name for this configuration policy.",
+ "policyPlatform": "Select the platform this app configuration policy will apply to.",
+ "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
+ "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
+ "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
+ "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
+ "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
+ "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
+ "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
+ "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
+ "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
+ "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
+ "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
+ "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "header": "Are you sure you want to delete this restriction?"
+ },
+ "DeviceLimit": {
+ "description": "Specify the maximum number of devices a user can enroll.",
+ "header": "Device limit restrictions",
+ "info": "Define how many devices each user can enroll."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Must be 1.0 or greater.",
+ "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
+ "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
+ "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
+ "min": "Minimum cannot be lower than {0}",
+ "minMax": "Minimum version cannot be greater than maximum version.",
+ "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
+ "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
+ },
+ "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
+ "blockManufacturerPlaceHolder": "Manufacturer name",
+ "blockManufacturersHeader": "Blocked manufacturers",
+ "cannotRestrict": "Restriction not supported",
+ "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
+ "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
+ "configurations": "Configure platforms",
+ "deviceManufacturer": "Device manufacturer",
+ "header": "Device type restrictions",
+ "info": "Define which platforms, versions, and management types can enroll.",
+ "manufacturer": "Manufacturer",
+ "max": "Max",
+ "maxVersion": "Maximum version",
+ "min": "Min",
+ "minVersion": "Minimum version",
+ "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
+ "personal": "Personally owned",
+ "platform": "Platform",
+ "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
+ "platformSettings": "Platform settings",
+ "platforms": "Select platforms",
+ "platformsSelected": "{0} platforms selected",
+ "type": "Type",
+ "versions": "versions",
+ "versionsRange": "Allow min/max range:",
+ "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Restriction Priorities were successfully saved."
+ },
+ "Row": {
+ "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
+ },
+ "Table": {
+ "deployed": "Deployed",
+ "name": "Name",
+ "priority": "Priority"
+ },
+ "Type": {
+ "limit": "Device limit restriction",
+ "type": "Device type restriction"
+ },
+ "allUsers": "All Users",
+ "androidRestrictions": "Android restrictions",
+ "create": "Create restriction",
+ "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
+ "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
+ "deleteTitle": "Are you sure you want to delete {0} restriction?",
+ "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
+ "edit": "Edit restriction",
+ "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
+ "iosRestrictions": "iOS restrictions",
+ "mDM": "MDM",
+ "macRestrictions": "macOS restrictions",
+ "maxVersion": "Max Version",
+ "minVersion": "Min Version",
+ "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
+ "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
+ "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
+ "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
+ "notFound": "Restriction not found. It may have already been deleted.",
+ "personallyOwned": "Personally owned devices",
+ "restriction": "Restriction",
+ "restrictionLowerCase": "restriction",
+ "restrictionType": "Restriction type",
+ "selectType": "Select restriction type",
+ "selectValidation": "Please select a platform",
+ "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
+ "typeRequired": "Restriction type is required.",
+ "winPhoneRestrictions": "Windows Phone restrictions",
+ "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
+ "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
+ "windowsRestrictions": "Windows restrictions",
+ "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 day",
+ "twoDays": "2 days",
+ "zeroDays": "0 days"
+ },
+ "SecurityTemplate": {
+ "aSR": "Attack surface reduction",
+ "accountProtection": "Account protection",
+ "allDevices": "All devices",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Antivirus Reporting (Preview)",
+ "conditionalAccess": "Conditional access",
+ "deviceCompliance": "Device compliance",
+ "diskEncryption": "Disk encryption",
+ "eDR": "Endpoint detection and response",
+ "ePM": "Endpoint Privilege Management",
+ "firewall": "Firewall",
+ "helpSupport": "Help and support",
+ "setup": "Setup",
+ "wdapt": "Microsoft Defender for Endpoint"
+ },
"OutlookAppConfig": {
"DataProtectionConfiguration": {
"header": "Data Protection configuration"
@@ -100,693 +1787,622 @@
"themesEnabledTitle": "Themes Enabled",
"themesEnabledTooltip": "Specify if the user is allowed to use a custom visual theme."
},
- "Languages": {
- "ar-aE": "Arabic (U.A.E.)",
- "ar-bH": "Arabic (Bahrain)",
- "ar-dZ": "Arabic (Algeria)",
- "ar-eG": "Arabic (Egypt)",
- "ar-iQ": "Arabic (Iraq)",
- "ar-jO": "Arabic (Jordan)",
- "ar-kW": "Arabic (Kuwait)",
- "ar-lB": "Arabic (Lebanon)",
- "ar-lY": "Arabic (Libya)",
- "ar-mA": "Arabic (Morocco)",
- "ar-oM": "Arabic (Oman)",
- "ar-qA": "Arabic (Qatar)",
- "ar-sA": "Arabic (Saudi Arabia)",
- "ar-sY": "Arabic (Syria)",
- "ar-tN": "Arabic (Tunisia)",
- "ar-yE": "Arabic (Yemen)",
- "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
- "az-latn": "Azerbaijani (Latin, Azerbaijan)",
- "bn-bD": "Bangla (Bangladesh)",
- "bn-iN": "Bangla (India)",
- "bs-cyrl": "Bosnian (Cyrillic)",
- "bs-latn": "Bosnian (Latin)",
- "zh-cN": "Chinese (PRC)",
- "zh-hK": "Chinese (Hong Kong S.A.R.)",
- "zh-mO": "Chinese (Macao S.A.R.)",
- "zh-sG": "Chinese (Singapore)",
- "zh-tW": "Chinese (Taiwan)",
- "hr-bA": "Croatian (Latin)",
- "hr-hR": "Croatian (Croatia)",
- "nl-bE": "Dutch (Belgium)",
- "nl-nL": "Dutch (Netherlands)",
- "en-aU": "English (Australia)",
- "en-bZ": "English (Belize)",
- "en-cA": "English (Canada)",
- "en-cabn": "English (Caribbean)",
- "en-iE": "English (Ireland)",
- "en-iN": "English (India)",
- "en-jM": "English (Jamaica)",
- "en-mY": "English (Malaysia)",
- "en-nZ": "English (New Zealand)",
- "en-pH": "English (Republic of the Philippines)",
- "en-sG": "English (Singapore)",
- "en-tT": "English (Trinidad and Tobago)",
- "en-uK": "English (United Kingdom)",
- "en-uS": "English (United States)",
- "en-zA": "English (South Africa)",
- "en-zW": "English (Zimbabwe)",
- "fr-bE": "French (Belgium)",
- "fr-cA": "French (Canada)",
- "fr-cH": "French (Switzerland)",
- "fr-fR": "French (France)",
- "fr-lU": "French (Luxembourg)",
- "fr-mC": "French (Monaco)",
- "de-aT": "German (Austria)",
- "de-cH": "German (Switzerland)",
- "de-dE": "German (Germany)",
- "de-lI": "German (Liechtenstein)",
- "de-lU": "German (Luxembourg)",
- "iu-cans": "Inuktitut (Syllabics, Canada)",
- "iu-latn": "Inuktitut (Latin, Canada)",
- "it-cH": "Italian (Switzerland)",
- "it-iT": "Italian (Italy)",
- "ms-bN": "Malay (Brunei Darussalam)",
- "ms-mY": "Malay (Malaysia)",
- "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
- "mn-mN": "Mongolian (Cyrillic, Mongolia)",
- "no-nB": "Norwegian, Bokmål (Norway)",
- "no-nn": "Norwegian, Nynorsk (Norway)",
- "pt-bR": "Portuguese (Brazil)",
- "pt-pT": "Portuguese (Portugal)",
- "quz-bO": "Quechua (Bolivia)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Peru)",
- "smj-nO": "Sami, Lule (Norway)",
- "smj-sE": "Sami, Lule (Sweden)",
- "se-fI": "Sami, Northern (Finland)",
- "se-nO": "Sami, Northern (Norway)",
- "se-sE": "Sami, Northern (Sweden)",
- "sma-nO": "Sami, Southern (Norway)",
- "sma-sE": "Sami, Southern (Sweden)",
- "smn": "Sami, Inari (Finland)",
- "sms": "Sami, Skolt (Finland)",
- "sr-Cyrl-bA": "Serbian (Cyrillic)",
- "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
- "sr-Latn-bA": "Serbian (Latin)",
- "sr-Latn-rS": "Serbian (Latin, Serbia)",
- "dsb": "Lower Sorbian (Germany)",
- "hsb": "Upper Sorbian (Germany)",
- "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
- "es-aR": "Spanish (Argentina)",
- "es-bO": "Spanish (Bolivia)",
- "es-cL": "Spanish (Chile)",
- "es-cO": "Spanish (Colombia)",
- "es-cR": "Spanish (Costa Rica)",
- "es-dO": "Spanish (Dominican Republic)",
- "es-eC": "Spanish (Ecuador)",
- "es-eS": "Spanish (Spain)",
- "es-gT": "Spanish (Guatemala)",
- "es-hN": "Spanish (Honduras)",
- "es-mX": "Spanish (Mexico)",
- "es-nI": "Spanish (Nicaragua)",
- "es-pA": "Spanish (Panama)",
- "es-pE": "Spanish (Peru)",
- "es-pR": "Spanish (Puerto Rico)",
- "es-pY": "Spanish (Paraguay)",
- "es-sV": "Spanish (El Salvador)",
- "es-uS": "Spanish (United States)",
- "es-uY": "Spanish (Uruguay)",
- "es-vE": "Spanish (Venezuela)",
- "sv-fI": "Swedish (Finland)",
- "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
- "uz-latn": "Uzbek (Latin, Uzbekistan)",
- "af": "Afrikaans (South Africa)",
- "sq": "Albanian (Albania)",
- "am": "Amharic (Ethiopia)",
- "hy": "Armenian (Armenia)",
- "as": "Assamese (India)",
- "ba": "Bashkir (Russia)",
- "eu": "Basque (Basque)",
- "be": "Belarusian (Belarus)",
- "br": "Breton (France)",
- "bg": "Bulgarian (Bulgaria)",
- "ca": "Catalan (Catalan)",
- "co": "Corsican (France)",
- "cs": "Czech (Czech Republic)",
- "da": "Danish (Denmark)",
- "dv": "Divehi (Maldives)",
- "et": "Estonian (Estonia)",
- "fo": "Faroese (Faroe Islands)",
- "fil": "Filipino (Philippines)",
- "fi": "Finnish (Finland)",
- "gl": "Galician (Galician)",
- "ka": "Georgian (Georgia)",
- "el": "Greek (Greece)",
- "gu": "Gujarati (India)",
- "ha": "Hausa (Latin, Nigeria)",
- "he": "Hebrew (Israel)",
- "hi": "Hindi (India)",
- "hu": "Hungarian (Hungary)",
- "is": "Icelandic (Iceland)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonesian (Indonesia)",
- "ga": "Irish (Ireland)",
- "xh": "isiXhosa (South Africa)",
- "zu": "isiZulu (South Africa)",
- "ja": "Japanese (Japan)",
- "kn": "Kannada (India)",
- "kk": "Kazakh (Kazakhstan)",
- "km": "Khmer (Cambodia)",
- "rw": "Kinyarwanda (Rwanda)",
- "sw": "Kiswahili (Kenya)",
- "kok": "Konkani (India)",
- "ko": "Korean (Korea)",
- "ky": "Kyrgyz (Kyrgyzstan)",
- "lo": "Lao (Lao P.D.R.)",
- "lv": "Latvian (Latvia)",
- "lt": "Lithuanian (Lithuania)",
- "lb": "Luxembourgish (Luxembourg)",
- "mk": "Macedonian (North Macedonia)",
- "ml": "Malayalam (India)",
- "mt": "Maltese (Malta)",
- "mi": "Maori (New Zealand)",
- "mr": "Marathi (India)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepali (Nepal)",
- "oc": "Occitan (France)",
- "or": "Odia (India)",
- "ps": "Pashto (Afghanistan)",
- "fa": "Persian",
- "pl": "Polish (Poland)",
- "pa": "Punjabi (India)",
- "ro": "Romanian (Romania)",
- "rm": "Romansh (Switzerland)",
- "ru": "Russian (Russia)",
- "sa": "Sanskrit (India)",
- "st": "Sesotho sa Leboa (South Africa)",
- "tn": "Setswana (South Africa)",
- "si": "Sinhala (Sri Lanka)",
- "sk": "Slovak (Slovakia)",
- "sl": "Slovenian (Slovenia)",
- "sv": "Swedish (Sweden)",
- "syr": "Syriac (Syria)",
- "tg": "Tajik (Cyrillic, Tajikistan)",
- "ta": "Tamil (India)",
- "tt": "Tatar (Russia)",
- "te": "Telugu (India)",
- "th": "Thai (Thailand)",
- "bo": "Tibetan (PRC)",
- "tr": "Turkish (Turkey)",
- "tk": "Turkmen (Turkmenistan)",
- "uk": "Ukrainian (Ukraine)",
- "ur": "Urdu (Islamic Republic of Pakistan)",
- "vi": "Vietnamese (Vietnam)",
- "cy": "Welsh (United Kingdom)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (PRC)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender for Endpoint",
- "androidDeviceOwnerApplications": "Applications",
- "androidDeviceOwnerPolicyMessages": "Custom support information",
- "androidForWorkPassword": "Device password",
- "appManagement": "Allow or Block apps",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Restricted Apps",
- "applicationVisibility": "Show or Hide Apps",
- "applications": "App Store",
- "applicationsAndGames": "App Store, Doc Viewing, Gaming",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Apps and experience",
- "associatedDomains": "Associated domains",
- "autonomousSingleAppMode": "Autonomous Single App Mode",
- "azureOperationalInsights": "Azure operational insights",
- "bitLocker": "Windows Encryption",
- "bootOptions": "Boot options",
- "browser": "Browser",
- "builtinApps": "Built-in apps",
- "cameras": "Cameras",
- "cellular": "Cellular",
- "cloudAndStorage": "Cloud and Storage",
- "cloudPrint": "Cloud Printer",
- "complianceEmailProfile": "Email",
- "connectedDevices": "Connected devices",
- "connectivity": "Cellular and connectivity",
- "contentCaching": "Content caching",
- "controlPanelAndSettings": "Control Panel and Settings",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Custom Compliance",
- "customConfiguration": "Custom Configuration Profile",
- "customOMASettings": "Custom OMA-URI Settings",
- "customPreferences": "Preference file",
- "dFCISecuritySettings": "Security settings",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows Firewall",
- "defenderLocalSecurityOptions": "Local device security options",
- "defenderSecurityCenter": "Microsoft Defender Security Center",
- "deliveryOptimization": "Delivery Optimization",
- "derivedCredentialAuthenticationConfiguration": "Derived credential",
- "deviceExperience": "Device experience",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Microsoft Defender Application Control",
- "deviceHealth": "Device Health",
- "devicePassword": "Device password",
- "deviceProperties": "Device Properties",
- "deviceRestrictions": "General",
- "deviceSecurity": "System security",
- "display": "Display",
- "domainJoin": "Domain Join",
- "domains": "Domains",
- "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge kiosk mode",
- "editionUpgrade": "Edition Upgrade",
- "education": "Education",
- "educationDeviceCerts": "Device certificates",
- "educationStudentCerts": "Student certificates",
- "educationTakeATest": "Take a Test",
- "educationTeacherCerts": "Teacher certificates",
- "emailProfile": "Email",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Single sign-on app extension",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Games",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Health monitoring",
- "homeScreenLayout": "Home Screen Layout",
- "iOSWallpaper": "Wallpaper",
- "importedPFX": "PKCS Imported Certificate",
- "iosDefenderAtp": "Microsoft Defender for Endpoint",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Kernel extensions",
- "keyboardAndDictionary": "Keyboard and dictionary",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Dedicated devices",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Kiosk web browser",
- "lockScreenMessage": "Lock Screen Message",
- "lockedScreenExperience": "Locked Screen Experience",
- "logging": "Reporting and Telemetry",
- "loginItems": "Login items",
- "loginWindow": "Login window",
- "macDefenderAtp": "Microsoft Defender for Endpoint",
- "maintenance": "Maintenance",
- "malware": "Malware",
- "messaging": "Messaging",
- "microphonesAndSpeakers": "Microphones and speakers",
- "networkBoundary": "Network boundary",
- "networkProxy": "Network proxy",
- "notifications": "App Notifications",
- "pKCS": "PKCS Certificate",
- "password": "Password",
- "personalProfile": "Personal profile",
- "personalization": "Personalization",
- "policyOverride": "Override Group Policy",
- "ports": "Ports",
- "powerSettings": "Power Settings",
- "printer": "Printer",
- "privacy": "Privacy",
- "privacyPerApp": "Per-app privacy exceptions",
- "privacyPreferences": "Privacy preferences",
- "projection": "Projection",
- "radios": "Radios",
- "sCCMCompliance": "Configuration Manager Compliance",
- "sCEP": "SCEP Certificate",
- "sCEPProperties": "SCEP Certificate",
- "sMode": "Mode switch (Windows Insider only)",
- "safari": "Safari",
- "search": "Search",
- "session": "Session",
- "sharedDevice": "Shared iPad",
- "sharedPCAccountManager": "Shared multi-user device",
- "singleSignOn": "Single sign-on",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Settings",
- "start": "Start",
- "systemExtensions": "System extensions",
- "systemSecurity": "System Security",
- "trustedCert": "Trusted Certificate",
- "uEFIAccess": "UEFI access",
- "updates": "Updates",
- "userRights": "User Rights",
- "usersAndAccounts": "Users and Accounts",
- "vPN": "Base VPN",
- "vPNApps": "Automatic VPN",
- "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
- "vPNConditionalAccess": "Conditional Access",
- "vPNConnectivity": "Connectivity",
- "vPNDNSTriggers": "DNS Settings",
- "vPNIKEv2": "IKEv2 settings",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Split Tunneling",
- "vPNTrustedNetwork": "Trusted Network Detection",
- "wakeSettings": "Wake settings",
- "webContentFilter": "Web Content Filter",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender for Endpoint",
- "windowsDefenderATP": "Microsoft Defender for Endpoint",
- "windowsHelloForBusiness": "Windows Hello for Business",
- "windowsSpotlight": "Windows Spotlight",
- "wiredNetwork": "Wired network",
- "wireless": "Wireless",
- "wirelessProjection": "Wireless projection",
- "workProfile": "Work profile settings",
- "workProfilePassword": "Work profile password",
- "xboxServices": "Xbox services",
- "zebraMx": "MX profile (Zebra only)",
- "complianceActionsLabel": "Actions for noncompliance"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Description"
- },
- "FeatureDeploymentSettings": {
- "header": "Feature deployment settings"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "This feature cannot downgrade a device.",
- "label": "Feature update to deploy"
- },
- "GradualRolloutEndDate": {
- "label": "Final group availability"
- },
- "GradualRolloutInterval": {
- "label": "Days between groups"
- },
- "GradualRolloutStartDate": {
- "label": "First group availability"
- },
- "Name": {
- "label": "Name"
- },
- "OptionalUpdate": {
- "label": "Required or optional update"
- },
- "RolloutOptions": {
- "label": "Rollout options"
- },
- "RolloutSettings": {
- "header": "When would you like to make the update available in Windows Update?"
- },
- "ScopeSettings": {
- "header": "Configure scope tags for this policy."
- },
- "StartDateOnlyStartDate": {
- "label": "First available date"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Disabled",
- "enabled": "Enabled",
- "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
- "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
- "notApplicable": "Not Applicable",
- "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
- },
- "bladeTitle": "Feature update deployments",
- "deploymentSettingsTitle": "Deployment settings",
- "loadError": "Loading failed!",
- "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
- },
- "Notifications": {
- "deploymentSaved": "\"{0}\" has been saved.",
- "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
- },
- "TabName": {
- "deploymentSettings": "Deployment settings",
- "groupAssignmentSettings": "Assignments",
- "scopeSettings": "Scope tags"
- },
- "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
- "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
- "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
- "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
- "profileNameWarning": "Name should be less than 64 characters",
- "specificLicensingRequired": "Some selected capabilities require specific licensing."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Allow the use of lowercase letters in PIN",
- "notAllow": "Do not allow the use of lowercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Allow the use of special characters in PIN",
- "notAllow": "Do not allow the use of special characters in PIN",
- "requireAtLeastOne": "Require the use of at least one special character in PIN"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Allow the use of uppercase letters in PIN",
- "notAllow": "Do not allow the use of uppercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
- }
- },
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "App Version",
- "dependencyName": "Dependency name",
- "lastModifiedTime": "Last modified time",
- "relationship": "Relationship",
- "replaced": "Replaced",
- "searchPlaceholder": "Filter by app name",
- "status": "Status details",
- "statusDetails": "Status",
- "supersedenceName": "Supersedence name"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Child dependency",
- "indirectSupersedence": "Not directly related",
- "supersedenceAncestors": "Superseding",
- "supersedenceDescendants": "Superseded"
- },
- "SupersededReplaced": {
- "no": "No",
- "yes": "Yes"
- },
- "Tabs": {
- "chart": "Chart",
- "dependency": "Dependency",
- "label": "View: ",
- "supersedence": "Supersedence",
- "table": "Table"
- },
- "dependencyGraphAriaLabel": "App dependency chart",
- "supersedenceGraphAriaLabel": "App supersedence chart"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Please select a discovery script",
- "scriptFileLabel": "Select your discovery script"
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
+ "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
+ "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
+ "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
+ "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
+ "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
+ "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
+ "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
+ "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
+ "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
+ "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
+ "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
+ "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
+ "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
+ "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
+ "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
+ "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
+ "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
+ "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
+ "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
+ "apps": "apps",
+ "appsListName": "Application list",
+ "blockingApps": "Blocking apps",
+ "managedApps": "Managed apps",
+ "noApps": "No applications",
+ "noAppsError": "Error retrieving applications",
+ "selectApps": "Select apps",
+ "selectedAppsCount": "{0} apps selected (100 max)",
+ "useSelectedAppsAll": "All",
+ "useSelectedAppsSelected": "Selected",
+ "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
},
- "PremiumBanner": {
- "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
- "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Script",
- "placeholder": "Click to select",
- "searchboxPlaceholder": "Search by script name",
- "title": "Select a discovery script"
+ "Header": {
+ "application": "Application",
+ "publisher": "Publisher",
+ "version": "Version"
},
- "SummaryGrid": {
- "ariaLabel": "Custom compliance rules summary"
+ "SearchBox": {
+ "ariaLabel": "Search apps",
+ "placeHolder": "Search by name or publisher"
+ },
+ "allowToUseToggle": "Allow users to use device if installation error occurs",
+ "blockToggle": "Block device use until all apps and profiles are installed",
+ "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
+ "collectLogToggle": "Turn on log collection and diagnostics page for end users",
+ "create": "Create Profile",
+ "customMessageTextBox": "Error message",
+ "customMessageToggle": "Show custom message when time limit or error occurs",
+ "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
+ "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
+ "progressToggle": "Show app and profile configuration progress",
+ "resetToggle": "Allow users to reset device if installation error occurs",
+ "timeout": "Show an error when installation takes longer than specified number of minutes"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Property",
+ "rule": "Rule",
+ "ruleDetails": "Rule Details",
+ "value": "Value"
},
- "UploadFile": {
- "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
- "noFileSelectedError": "Please select a json file",
- "parseFileSelectedError": "The json file is invalid"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filter",
- "noFilters": "None"
- },
- "Platform": {
- "all": "All",
- "android": "Android device administrator",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android enterprise",
- "common": "Common",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS and Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "windows": "Windows",
- "windows10": "Windows 10 and later",
- "windows10CM": "Windows 10 and later (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 and later",
- "windows8And10": "Windows 8 and 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 and later",
- "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows PC"
- },
- "AppInformationTab": {
- "Info": {
- "AppStoreUrl": {
- "android": "Enter the link to the app listing in Google Play store. For example:",
- "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
- "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
- "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
- "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
- "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
- "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ "assignIf": "Assign profile if",
+ "deleteWarning": "This will delete the selected Applicability Rule",
+ "dontAssignIf": "Don't assign profile if",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "and {0} more",
+ "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
+ "maxText": "Max",
+ "minText": "Min",
+ "noActionRow": "No Applicability Rules Specified",
+ "oSVersion": "e.g. 1.2.3.4",
+ "toText": "to",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "OS edition",
+ "windows10OsVersion": "OS version",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Allow user to change setting",
+ "tooltip": "Specify if the user is allowed to change the setting."
+ },
+ "AllowWorkAccounts": {
+ "title": "Allow only work or school accounts",
+ "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
},
- "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
- "applicableDeviceType": "Select the device types that can install this app.",
- "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
- "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
- "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
- "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
- "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
- "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
- "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
- "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
- "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
- "learnMore": "Learn more",
- "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
- "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
- "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
- "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
- "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
- "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
- "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
- "packageId": "The app Package Identifier is the unique value that identifies the app.",
- "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
- "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
- "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
- "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
- "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
- "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
- "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
- "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
- "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
- "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
- },
- "descriptionPreview": "Preview",
- "descriptionRequired": "Description is required.",
- "editDescription": "Edit Description",
- "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
- "name": "App information",
- "nameForOfficeSuitApp": "App suite information"
- },
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ "BlockExternalImages": {
+ "title": "Block external images",
+ "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
+ },
+ "ConfigureEmail": {
+ "title": "Configure email account settings"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
+ "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
+ },
+ "title": "Default app signature"
+ },
+ "OfficeFeedReplies": {
+ "title": "Discover Feed",
+ "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
+ },
+ "OrganizeMailByThread": {
+ "title": "Organize mail by thread",
+ "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
+ },
+ "PlayMyEmails": {
+ "title": "Play My Emails",
+ "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
+ },
+ "SuggestedReplies": {
+ "title": "Suggested replies",
+ "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
+ },
+ "SyncCalendars": {
+ "title": "Sync Calendars",
+ "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
+ },
+ "TextPredictions": {
+ "title": "Text Predictions",
+ "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
},
- "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
- "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
- "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
- "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
- "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
- "appSharingToLevel3": "{0}: Allow sending org data to any app",
- "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
- "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
- "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
- "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
- "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
- "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
- "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
- "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
- "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
- "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
- "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
- "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
- "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
- "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
- "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
- "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
- "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
- "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
- "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
- "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
- "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
- "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
- "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
- "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
- "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
- "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
- "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
- "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
- "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ "ThemesEnabled": {
+ "title": "Themes enabled",
+ "tooltip": "Specify if the user is allowed to use a custom visual theme."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS devices"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Admin contacts",
+ "appPackaging": "App packaging",
+ "autopatchGroups": "Autopatch groups",
+ "devices": "Devices",
+ "featureEnablement": "Feature activate",
+ "feedback": "Feedback",
+ "gettingStarted": "Getting started",
+ "messages": "Messages",
+ "onlineResources": "Online resources",
+ "policyHealth": "Policy health",
+ "policyHealthPreview": "Policy health (preview)",
+ "releaseManagement": "Release management",
+ "serviceRequests": "Service requests",
+ "settings": "Settings",
+ "supportRequests": "Support requests",
+ "tenantEnrollment": "Tenant enrollment",
+ "tenantManagement": "Tenant management"
+ },
+ "actions": "Actions for Non-Compliance",
+ "advancedExchangeSettings": "Exchange online settings",
+ "advancedThreatProtection": "Microsoft Defender for Endpoint",
+ "allApps": "All apps",
+ "allDevices": "All devices",
+ "androidFotaDeployments": "Android FOTA deployments",
+ "appBundles": "App Bundles",
+ "appCategories": "App categories",
+ "appConfigPolicies": "App configuration policies",
+ "appConfigurationStatus": "App Configuration Status",
+ "appInstallStatus": "App install status",
+ "appLicences": "App licenses",
+ "appProtectionPolicies": "App protection policies",
+ "appProtectionStatus": "App Protection status",
+ "appSelectiveWipe": "App selective wipe",
+ "appleVppTokens": "Apple VPP Tokens",
+ "apps": "Apps",
+ "assign": "Assignments",
+ "assignedPermissions": "Assigned permissions",
+ "assignedRoles": "Assigned roles",
+ "autopilotDeploymentReport": "Autopilot deployments (preview)",
+ "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
+ "brandingAndCustomization": "Customization",
+ "cartProfiles": "Cart profiles",
+ "certificateConnectors": "Certificate connectors",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Cloud attached devices (preview)",
+ "cloudPcActions": "Cloud PC actions (preview)",
+ "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
+ "compliancePolicies": "Compliance policies",
+ "complianceScriptManagement": "Scripts",
+ "complianceScriptManagementPreview": "Scripts (preview)",
+ "complianceSettings": "Compliance policy settings",
+ "conditionStatements": "Condition statements",
+ "conditions": "Locations",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Configuration profiles",
+ "configurationScripts": "Configuration Scripts",
+ "connectorsAndTokens": "Connectors and tokens",
+ "corporateDeviceIdentifiers": "Corporate device identifiers",
+ "customAttributes": "Custom attributes",
+ "customAttributesMacOS": "Custom attributes for macOS",
+ "customNotifications": "Custom notifications",
+ "deploymentSettings": "Deployment settings",
+ "derivedCredentials": "Derived Credentials",
+ "deviceActions": "Device actions",
+ "deviceCategories": "Device categories",
+ "deviceCleanUp": "Device clean-up rules",
+ "deviceEnrollmentManagers": "Device enrollment managers",
+ "deviceExecutionStatus": "Device status",
+ "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
+ "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
+ "devices": "Devices",
+ "discoveredApps": "Discovered apps",
+ "edgePolicies": "Policies for Microsoft Edge",
+ "embeddedSIM": "eSIM cellular profiles (preview)",
+ "enrollDevices": "Enroll devices",
+ "enrollmentFailures": "Enrollment failures",
+ "enrollmentNotifications": "Enrollment notifications (preview)",
+ "enrollmentRestrictions": "Enrollment restrictions",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange service connectors",
+ "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
+ "failuresForDriverUpdates": "Windows Driver update failures",
+ "failuresForFeatureUpdates": "Feature update failures",
+ "failuresForQualityUpdates": "Windows Expedited update failures",
+ "featureFlighting": "Feature flighting",
+ "featureUpdateDeployments": "Feature updates for Windows 10 and later",
+ "flighting": "Flighting",
+ "fotaUpdate": "Firmware over-the-air update",
+ "groupPolicy": "Administrative Templates",
+ "groupPolicyAnalytics": "Group policy analytics",
+ "helpSupport": "Help and support",
+ "helpSupportReplacement": "Help and support ({0})",
+ "iOSAppProvisioning": "iOS app provisioning profiles",
+ "incompleteUserEnrollments": "Incomplete user enrollments",
+ "iosUpdates": "iOS/iPadOS updates",
+ "legacyPcManagement": "Legacy PC management",
+ "macOSSoftwareUpdate": "macOS updates",
+ "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
+ "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
+ "macOSSoftwareUpdateStateSummaries": "updates",
+ "managedGooglePlay": "Managed Google Play",
+ "msfb": "Microsoft Store for Business",
+ "myPermissions": "My permissions",
+ "notifications": "Notifications",
+ "officeApps": "Office apps",
+ "officeProPlusPolicies": "Policies for Office apps",
+ "onPremise": "On Premise",
+ "onPremisesConnector": "Exchange ActiveSync on-premises connector",
+ "onPremisesDeviceAccess": "Exchange ActiveSync devices",
+ "onPremisesManageAccess": "Exchange on-premises access",
+ "outOfDateIosDevices": "Installation failures for iOS devices",
+ "overview": "Overview",
+ "partnerDeviceManagement": "Partner device management",
+ "perUpdateRingDeploymentState": "Per update ring deployment state",
+ "permissions": "Permissions",
+ "platformApps": "{0} apps",
+ "platformDevices": "{0} devices",
+ "platformEnrollment": "{0} enrollment",
+ "policies": "Policies",
+ "profiles": "Profiles",
+ "properties": "Properties",
+ "reports": "Reports",
+ "retireNoncompliantDevices": "Retire noncompliant devices",
+ "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
+ "role": "Role",
+ "scriptManagement": "Scripts",
+ "securityBaselines": "Security baselines",
+ "serviceToServiceConnector": "Exchange online connector",
+ "servicenowConnector": "ServiceNow connector",
+ "shellScripts": "Shell scripts",
+ "teamViewerConnector": "TeamViewer connector",
+ "telecomeExpenseManagement": "Telecom expense management",
+ "tenantAdmin": "Tenant admin",
+ "tenantAdministration": "Tenant administration",
+ "termsAndConditions": "Terms and conditions",
+ "titles": "Titles",
+ "troubleshoot": "Troubleshoot",
+ "troubleshootSupport": "Troubleshooting + support",
+ "user": "User",
+ "userExecutionStatus": "User status",
+ "wdacSupplementalPolicies": "S mode supplemental policies",
+ "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
+ "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
+ "win32CatalogUpdateAppPreviewTitle": "Enterprise App Catalog apps with updates (preview)",
+ "win32CatalogUpdateAppTitle": "Enterprise App Catalog apps with updates",
+ "windows10DriverUpdate": "Driver updates for Windows 10 and later",
+ "windows10QualityUpdate": "Quality updates for Windows 10 and later",
+ "windows10UpdateRings": "Update rings for Windows 10 and later",
+ "windows10XPolicyFailures": "Windows 10X policy failures",
+ "windows365PartnerConnector": "Windows 365 partner connectors",
+ "windowsDiagnosticData": "Windows data",
+ "windowsEnterpriseCertificate": "Windows enterprise certificate",
+ "windowsManagement": "Scripts",
+ "windowsSideLoadingKeys": "Windows side loading keys",
+ "windowsSymantecCertificate": "Windows DigiCert certificate",
+ "windowsThreatReport": "Threat agent status"
+ },
+ "TAPSettings": {
+ "AllowedDataIngestionLocations": {
+ "label": "Allow users to open data from selected services",
+ "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
+ },
+ "AndroidBackup": {
+ "label": "Backup org data to Android backup services",
+ "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ },
+ "AndroidBiometricAuthentication": {
+ "label": "Biometrics instead of PIN for access",
+ "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
+ },
+ "AndroidFingerprint": {
+ "label": "Fingerprint instead of PIN for access (Android 6.0+)",
+ "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
+ },
+ "AndroidOverrideFingerprint": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "AppPIN": {
+ "label": "App PIN when device PIN is set",
+ "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
+ },
+ "BlockDataIngestionIntoOrganizationDocuments": {
+ "label": "Open data into Org documents",
+ "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
+ "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
+ "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
+ "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
+ },
+ "ConnectToVpnOnLaunch": {
+ "label": "Start Microsoft Tunnel connection on app-launch",
+ "tooltip": "Allow connection to VPN when app is launch"
+ },
+ "CredentialsForAccess": {
+ "label": "Work or school account credentials for access",
+ "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
+ },
+ "CustomBrowserDisplayName": {
+ "label": "Unmanaged Browser Name",
+ "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
+ },
+ "CustomBrowserPackageId": {
+ "label": "Unmanaged Browser ID",
+ "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
+ },
+ "CustomBrowserProtocol": {
+ "label": "Unmanaged browser protocol",
+ "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
+ },
+ "DialerRestrictionLevel": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
+ "label": "Transfer telecommunication data to",
+ "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "EncryptData": {
+ "label": "Encrypt org data",
+ "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
},
- "Tap": {
- "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
- "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
- "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
- "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
- "checkInput": "Check input for validity",
- "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
- "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
- "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
- "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
- "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
- "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
- "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
- "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
- "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
- "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
- "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
- "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
- "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
- "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
- "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
- "name": "The name of this network boundary",
- "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
- "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
- "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
- "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
- "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
- "protectUnderLock": "Protects app content while the device is in a locked state.",
- "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
- "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
- "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
- "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
- "required": "Required",
- "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
- "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
- "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
- "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
- "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ "EncryptDataAndroid": {
+ "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
+ },
+ "EncryptDataIos": {
+ "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 256-bit AES encryption to app data.",
+ "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
+ "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
},
- "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
- },
+ "EncryptDataOnEnrolledDevices": {
+ "label": "Encrypt org data on enrolled devices",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
+ },
+ "IOSBackup": {
+ "label": "Backup org data to iTunes and iCloud backups",
+ "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
+ },
+ "IOSFaceID": {
+ "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
+ "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
+ },
+ "IOSOverrideTouchId": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "IOSTouchId": {
+ "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
+ "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
+ },
+ "MessagingRedirectAppDisplayName": {
+ "label": "Messaging App Name"
+ },
+ "MessagingRedirectAppPackageId": {
+ "label": "Messaging App Package ID"
+ },
+ "MessagingRedirectAppUrlScheme": {
+ "label": "Messaging App URL Scheme"
+ },
+ "NotificationRestriction": {
+ "label": "Org data notifications",
+ "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
+ },
+ "OpenLinksManagedBrowser": {
+ "label": "Restrict web content transfer with other apps",
+ "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
+ },
+ "OverrideBiometric": {
+ "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
+ },
+ "PinAccess": {
+ "label": "PIN for access",
+ "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
+ },
+ "PinLength": {
+ "label": "Select minimum PIN length",
+ "tooltip": "This setting specifies the minimum number of digits of a PIN."
+ },
+ "PinType": {
+ "label": "PIN type",
+ "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
+ },
+ "Printing": {
+ "label": "Printing org data",
+ "tooltip": "If blocked, the app cannot print protected data."
+ },
+ "ProtectedMessagingRedirectAppType": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
+ "label": "Transfer messaging data to",
+ "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "ReceiveData": {
+ "label": "Receive data from other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ },
+ "RecheckAccessAfter": {
+ "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
+ "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
+ },
+ "RequireClass3Biometrics": {
+ "label": "Class 3 Biometrics (Android 9.0+)",
+ "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
+ },
+ "RequirePinAfterBiometricChange": {
+ "label": "Override Biometrics with PIN after biometric updates",
+ "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
+ },
+ "RestrictKeyboards": {
+ "duplicatePackageError": "The package ID must be unique.",
+ "invalidPackageError": "Invalid package ID",
+ "label": "Approved keyboards",
+ "select": "Select keyboards to approve",
+ "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
+ "title": "Add approved keyboards",
+ "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
+ },
+ "SaveData": {
+ "label": "Save copies of org data",
+ "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
+ },
+ "SaveDataToSelected": {
+ "label": "Allow user to save copies to selected services",
+ "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
+ },
+ "ScreenCaptureAndAndroidAssistant": {
+ "label": "Screen capture and Google Assistant\n",
+ "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
+ },
+ "SendData": {
+ "label": "Send org data to other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
+ },
+ "SimplePin": {
+ "label": "Simple PIN",
+ "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
+ },
+ "SyncContacts": {
+ "label": "Sync policy managed app data with native apps or add-ins"
+ },
+ "ThirdPartyKeyboards": {
+ "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
+ "label": "Third party keyboards"
+ },
+ "Timeout": {
+ "label": "Timeout (minutes of inactivity)"
+ },
+ "WinCutCopyPaste": {
+ "label": "Allow cut, copy, and paste for",
+ "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
+ },
+ "WinPrintData": {
+ "label": "Print org data",
+ "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
+ },
+ "WinReceiveData": {
+ "label": "Receive data from",
+ "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
+ },
+ "WinSendData": {
+ "label": "Send org data to",
+ "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
+ },
+ "Tap": {
+ "numberOfDays": "Number of days",
+ "pinResetAfterNumberOfDays": "PIN reset after number of days",
+ "previousPinBlockCount": "Select number of previous PIN values to maintain"
+ }
+ },
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Make available to users as an optional update",
+ "optionalValue": "Optional",
+ "required": "Make available to users as a required update",
+ "requiredValue": "Required"
+ },
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "webApp": "Web link",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "PolicySet": {
+ "appManagement": "Application management",
+ "assignments": "Assignments",
+ "basics": "Basics",
+ "deviceEnrollment": "Device enrollment",
+ "deviceManagement": "Device management",
+ "scopeTags": "Scope tags",
+ "appConfigurationTitle": "App configuration policies",
+ "appProtectionTitle": "App protection policies",
+ "appTitle": "Apps",
+ "iOSAppProvisioningTitle": "iOS app provisioning profiles",
+ "deviceLimitRestrictionTitle": "Device limit restrictions",
+ "deviceTypeRestrictionTitle": "Device type restrictions",
+ "enrollmentStatusSettingTitle": "Enrollment status pages",
+ "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
+ "deviceComplianceTitle": "Device compliance policies",
+ "deviceConfigurationTitle": "Device configuration profiles",
+ "powershellScriptTitle": "Powershell scripts"
+ },
"Win32Program": {
"DeviceRestartBehaviorOptions": {
"allow": "App install may force a device restart",
@@ -819,6 +2435,233 @@
"uninstallCommand": "Uninstall command",
"uninstallCommandTooltip": "The complete uninstallation command line used to uninstall this app."
},
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
+ },
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Allow the use of lowercase letters in PIN",
+ "notAllow": "Do not allow the use of lowercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Allow the use of special characters in PIN",
+ "notAllow": "Do not allow the use of special characters in PIN",
+ "requireAtLeastOne": "Require the use of at least one special character in PIN"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Allow the use of uppercase letters in PIN",
+ "notAllow": "Do not allow the use of uppercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
+ }
+ },
"Autopilot": {
"AssignResourceAccount": {
"createNewCommandMenu": "Create new",
@@ -1031,268 +2874,1051 @@
"windowsPCCommandMenu": "Windows PC",
"directoryServiceLabel": "Join to Microsoft Entra ID as"
},
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Admin Groups",
- "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
- "rolesMenuTitle": "Endpoint Manager roles",
- "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
- "RoleAssignmentScope": "Scope Groups"
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Managed devices",
+ "devicesWithoutEnrollment": "Managed apps"
},
- "MinimumOperatingSystem": {
- "Android": {
- "v10": "Android 10.0",
- "v11": "Android 11.0",
- "v4": "Android 4.0 (Ice Cream Sandwich)",
- "v403": "Android 4.0.3 (Ice Cream Sandwich)",
- "v41": "Android 4.1 (Jelly Bean)",
- "v42": "Android 4.2 (Jelly Bean)",
- "v43": "Android 4.3 (Jelly Bean)",
- "v44": "Android 4.4 (KitKat)",
- "v5": "Android 5.0 (Lollipop)",
- "v51": "Android 5.1 (Lollipop)",
- "v6": "Android 6.0 (Marshmallow)",
- "v7": "Android 7.0 (Nougat)",
- "v71": "Android 7.1 (Nougat)",
- "v8": "Android 8.0 (Oreo)",
- "v81": "Android 8.1 (Oreo)",
- "v9": "Android 9.0 (Pie)"
- },
- "IOS": {
- "v10": "iOS 10.0",
- "v11": "iOS 11.0",
- "v12": "iOS 12.0",
- "v13": "iOS 13.0",
- "v14": "iOS 14.0",
- "v15": "iOS 15.0",
- "v16": "iOS 16.0",
- "v17": "iOS 17.0",
- "v8": "iOS 8.0",
- "v9": "iOS 9.0"
- },
- "MacOS": {
- "V10": {
- "10": "OS X Yosemite 10.10",
- "11": "OS X El Capitan 10.11",
- "12": "macOS Sierra 10.12",
- "13": "macOS High Sierra 10.13",
- "14": "macOS Mojave 10.14",
- "15": "macOS Catalina 10.15",
- "7": "Mac OS X Lion 10.7",
- "8": "OS X Mountain Lion 10.8",
- "9": "OS X Mavericks 10.9"
- },
- "V11": {
- "0": "macOS Big Sur 11.0"
- },
- "V12": {
- "0": "macOS Monterey 12.0"
- },
- "V13": {
- "0": "macOS Ventura 13.0"
- },
- "V14": {
- "0": "macOS Sonoma 14.0"
- }
- },
- "Windows": {
- "V10Release": {
- "release1607": "Windows 10 1607",
- "release1703": "Windows 10 1703",
- "release1709": "Windows 10 1709",
- "release1803": "Windows 10 1803",
- "release1809": "Windows 10 1809",
- "release1903": "Windows 10 1903",
- "release1909": "Windows 10 1909",
- "release2004": "Windows 10 2004",
- "release21H1": "Windows 10 21H1",
- "release21H2": "Windows 10 21H2",
- "release22H2": "Windows 10 22H2",
- "release2H20": "Windows 10 20H2"
- },
- "V11Release": {
- "release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
- },
- "v10": "Windows 10.0",
- "v80": "Windows 8.0",
- "v81": "Windows 8.1"
- },
- "WindowsPhone": {
- "v80": "Windows Phone 8.0",
- "v81": "Windows Phone 8.1"
- }
- },
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
- "apps": "apps",
- "appsListName": "Application list",
- "blockingApps": "Blocking apps",
- "managedApps": "Managed apps",
- "noApps": "No applications",
- "noAppsError": "Error retrieving applications",
- "selectApps": "Select apps",
- "selectedAppsCount": "{0} apps selected (100 max)",
- "useSelectedAppsAll": "All",
- "useSelectedAppsSelected": "Selected",
- "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
- },
- "Header": {
- "application": "Application",
- "publisher": "Publisher",
- "version": "Version"
+ "AppProtection": {
+ "allAppTypes": "Target to all app types",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Apps in Android Work Profile",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
+ "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
+ "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
+ "appsOnUnmanagedDevices": "Apps on unmanaged devices",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Not Available",
+ "windows10PlatformLabel": "Windows 10 and later",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Project Online Desktop Client",
+ "visioProRetail": "Visio Online Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Failed to delete {0}",
+ "failureCa": "Failed to delete {0} because it is referenced by CA policies",
+ "modifying": "Deleting {0}",
+ "success": "Successfully deleted {0}"
+ },
+ "Notify": {
+ "failure": "Failed to update {0}",
+ "modifying": "Modifying {0}",
+ "success": "Successfully updated {0}"
+ },
+ "menuLabel": "Authentication context"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
+ "certificate": "Certificate authentication",
+ "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
+ "multifactor": "Multifactor authentication",
+ "require": "Require federated authentication method (Preview)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
+ },
+ "Option": {
+ "always": "Always persistent",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "label": "Persistent browser session",
+ "never": "Never persistent"
+ },
+ "Warning": {
+ "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Hours or days",
+ "value": "Frequency"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} days",
+ "singular": "1 day"
+ },
+ "Hour": {
+ "plural": "{0} hours",
+ "singular": "1 hour"
+ },
+ "daysOption": "Days",
+ "everytime": "Every time",
+ "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
+ "hoursOption": "Hours",
+ "label": "Sign-in frequency",
+ "placeholder": "Select units"
+ }
+ },
+ "mainOption": "Modify session lifetime",
+ "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
+ },
+ "SingleSelectorActive": {
+ "failed": "Unable to load this data.",
+ "reattempt": "Loading data. Reattempt {0} of {1}."
},
- "SearchBox": {
- "ariaLabel": "Search apps",
- "placeHolder": "Search by name or publisher"
- },
- "allowToUseToggle": "Allow users to use device if installation error occurs",
- "blockToggle": "Block device use until all apps and profiles are installed",
- "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
- "collectLogToggle": "Turn on log collection and diagnostics page for end users",
- "create": "Create Profile",
- "customMessageTextBox": "Error message",
- "customMessageToggle": "Show custom message when time limit or error occurs",
- "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
- "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
- "progressToggle": "Show app and profile configuration progress",
- "resetToggle": "Allow users to reset device if installation error occurs",
- "timeout": "Show an error when installation takes longer than specified number of minutes"
- },
- "TableHeaders": {
- "activity": "Activity",
- "activityName": "Activity name",
- "actor": "Initiated by (actor)",
- "actorType": "Actor type",
- "app": "App",
- "appName": "App name",
- "applicationName": "Application name",
- "approvalType": "Approval method",
- "assignedGroups": "Group",
- "assignment": "Assignment",
- "assignmentStatus": "Assigned",
- "assignments": "Assignments",
- "attributeName": "Attribute name",
- "attributeType": "Attribute type",
- "bundleId": "Bundle-Id",
- "category": "Category",
- "complianceGracePeriodExpiration": "Compliance grace period expiration",
- "configurationType": "Profile type",
- "conflictingPolicy": "Conflicting Policies",
- "createdDate": "Created date",
- "currentOs": "Current OS",
- "date": "Date",
- "dateRange": "Date range",
- "deployed": "Deployed",
- "description": "Description",
- "device": "Device",
- "deviceId": "Device ID",
- "deviceName": "Device name",
- "deviceOrApplicationName": "Device or application name",
- "deviceReporting": "Devices reporting",
- "diagnosticCode": "Diagnostic Code",
- "diagnosticText": "Diagnostic Text",
- "diagnostics": "Diagnostics",
- "displayName": "Display name",
- "driversToReview": "Drivers to review",
- "eSIMActivationStatus": "Activation status",
- "eSIMCellularStatus": "Cellular status",
- "eSIMICCID": "ICCID",
- "eSIMPoolName": "Cellular subscription",
- "eSIMState": "eSIM state",
- "eSIMTokenAmount": "Total eSIM activation codes",
- "enabled": "Enabled",
- "enabledPlatforms": "Enabled Platforms",
- "encryptionReadiness": "Encryption Readiness",
- "encryptionStatus": "Encryption Status",
- "endTime": "End time",
- "enrollment": "Enrollment",
- "enrollmentAttempt": "Enrollment start",
- "eventDateTime": "Timestamp",
- "eventIdentifier": "Event ID",
- "eventLevel": "Level",
- "excluded": "Excluded",
- "failure": "Failure",
- "featureUpdateDeferral": "Feature Deferral",
- "featureUpdateVersion": "Feature Update Version",
- "featureUpdatesPaused": "Feature (Paused)",
- "featureUpdatesStatus": "Feature",
- "from": "From",
- "groups": "Groups",
- "groupsSelected": "Groups Selected",
- "installationStatus": "Installation Status",
- "issueId": "Issue id",
- "lastCheckinTime": "Last Check-in Time",
- "lastModified": "Last modified",
- "lastScanTime": "Last Scan Time",
- "lastSuccessfulSync": "Last Successful Sync",
- "lastUpdated": "Last Updated",
- "location": "Location",
- "loggedInUser": "Logged in user",
- "message": "Message",
- "model": "Model",
- "mtdConnector": "MTD Connector",
- "name": "Profile name",
- "oSVersion": "OS Version",
- "operationType": "Operation type",
- "os": "OS",
- "packageName": "Package name",
- "partnerName": "Partner",
- "partnerStatus": "Partner status",
- "permission": "Permission",
- "platform": "Platform",
- "policies": "Policies",
- "policy": "Policy",
- "policyType": "Policy type",
- "preventedUpdateDays": "Restricted days",
- "priority": "Priority",
- "profiles": "Profiles",
- "publicAddress": "Public address",
- "publisher": "Publisher",
- "qualityUpdateDeferral": "Quality Deferral",
- "qualityUpdateRelease": "Quality Update Release",
- "qualityUpdateVersion": "Quality Update Version",
- "qualityUpdatesPaused": "Quality (Paused)",
- "qualityUpdatesStatus": "Quality",
- "reason": "Reason",
- "resource": "Resource",
- "roleName": "Name",
- "roles": "Roles",
- "scopeGroups": "Scope groups",
- "scopeSize": "Assigned Scope Groups",
- "scopeTags": "Scope tags",
- "scriptName": "Script name",
- "scriptType": "Script type",
- "servicingOption": "Servicing channel",
- "setting": "Setting",
- "settings": "Settings",
- "siteName": "Site name",
- "source": "Source",
- "sourceProfile": "Source Profile",
- "startTime": "Start time",
- "state": "State",
- "stateDetails": "State details",
- "status": "Status",
- "subject": "Subject",
- "support": "Support",
- "supportEndDate": "Support End Date",
- "tPMVersion": "TPM Version",
- "target": "Target",
- "timeWindows": "Time windows",
- "timeZone": "Time zone",
- "type": "Type",
- "updateScheduleType": "Schedule type",
- "updateStatus": "Update Status",
- "user": "User",
- "userPrincipalName": "User principal name",
- "users": "Users",
- "usersExcluded": "Users excluded",
- "usersTargeted": "Users targeted",
- "value": "Value",
- "includedGroups": "Included Groups",
- "excludedGroups": "Excluded Groups",
- "licenseType": "License type"
- },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Choose directory roles"
+ },
+ "Excluded": {
+ "gridAria": "List of excluded users"
+ },
+ "Included": {
+ "gridAria": "List of included users"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
+ "customRoleSelected": "At least one custom role is selected",
+ "failed": "\"{0}\" must be configured",
+ "roles": "Select at least one role",
+ "usersGroups": "Select at least one user or group"
+ },
+ "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
+ },
+ "advancedTabText": "Advanced",
+ "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
+ "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
+ "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
+ "allDayCheckboxLabel": "All day",
+ "allDevicePlatforms": "Any device",
+ "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
+ "allGuestUserLabel": "All guest and external users",
+ "allRiskLevelsOption": "All risk levels",
+ "allTrustedLocationLabel": "All trusted locations",
+ "allUserGroupSetSelectorLabel": "All users and groups selected",
+ "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
+ "allUsersString": "All users",
+ "and": "{0} AND {1} ",
+ "andWithGrouping": "({0}) AND {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Any cloud app",
+ "appContextOptionInfoContent": "Requested authentication tag",
+ "appContextOptionLabel": "Requested authentication tag (Preview)",
+ "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
+ "appNotSetSeletorLabel": "0 cloud apps selected",
+ "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
+ "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
+ "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
+ "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
+ "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
+ "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
+ "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
+ "applyConditonLabel": "Configure",
+ "ariaLabelPolicyDisabled": "Policy is disabled",
+ "ariaLabelPolicyEnabled": "Policy is enabled",
+ "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
+ "blockAccess": "Block access",
+ "builtInDirectoryRoleLabel": "Built-in directory roles",
+ "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "casInfoBubble": "This control works for various cloud apps.",
+ "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "cert64DownloadCol": "Download base64 certificate",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Download certificate",
+ "certDurationCol": "Expiry",
+ "certDurationStartCol": "Valid from",
+ "certName": "VpnCert",
+ "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Choose Applications",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Chosen Applications",
+ "chooseApplicationsEmpty": "No Applications",
+ "chooseApplicationsNone": "None",
+ "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseApplicationsPlural": "{0} and {1} more",
+ "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
+ "chooseApplicationsRemove": "Remove",
+ "chooseApplicationsReturnedPlural": "{0} applications found",
+ "chooseApplicationsReturnedSingular": "1 application found",
+ "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
+ "chooseApplicationsSearchHint": "Search Applications...",
+ "chooseApplicationsSearchLabel": "Applications",
+ "chooseApplicationsSearching": "Searching...",
+ "chooseApplicationsSelect": "Select",
+ "chooseApplicationsSelected": "Selected",
+ "chooseApplicationsSingular": "{0} and 1 more",
+ "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "chooseLocationCorpnetItem": "Corporate network",
+ "chooseLocationSelectedLocationsLabel": "Selected locations",
+ "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Choose Locations",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Chosen Locations",
+ "chooseLocationsEmpty": "No Locations",
+ "chooseLocationsExcludedSelectorTitle": "Select",
+ "chooseLocationsIncludedSelectorTitle": "Select",
+ "chooseLocationsNone": "None",
+ "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseLocationsPlural": "{0} and {1} more",
+ "chooseLocationsRemove": "Remove",
+ "chooseLocationsReturnedPlural": "{0} locations found",
+ "chooseLocationsReturnedSingular": "1 location found",
+ "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
+ "chooseLocationsSearchHint": "Search Locations...",
+ "chooseLocationsSearchLabel": "Locations",
+ "chooseLocationsSearching": "Searching...",
+ "chooseLocationsSelect": "Select",
+ "chooseLocationsSelected": "Selected",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
+ "chooseLocationsSingular": "{0} and 1 more",
+ "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "claimProviderAddCommandText": "New custom control",
+ "claimProviderAddNewBladeTitle": "New custom control",
+ "claimProviderDeleteCommand": "Delete",
+ "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "claimProviderDeleteTitle": "Are you sure?",
+ "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
+ "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
+ "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
+ "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
+ "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
+ "claimProviderNotificationCreateTitle": "Creating '{0}'",
+ "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
+ "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
+ "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
+ "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
+ "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
+ "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
+ "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
+ "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "claimProviderNotificationUpdateTitle": "Updating '{0}'",
+ "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
+ "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
+ "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
+ "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
+ "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
+ "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
+ "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
+ "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
+ "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
+ "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
+ "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
+ "claimProvidersNone": "No custom controls",
+ "claimProvidersSearchPlaceholder": "Search controls.",
+ "classicPoilcyFilterTitle": "Show",
+ "classicPolicyAllPlatforms": "All Platforms",
+ "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
+ "classicPolicyCloudAppTitle": "Cloud application",
+ "classicPolicyControlAllow": "Allow",
+ "classicPolicyControlBlock": "Block",
+ "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
+ "classicPolicyControlRequireCompliantDevice": "Require compliant device",
+ "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
+ "classicPolicyControlRequireMfa": "Require multifactor authentication",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
+ "classicPolicyDeleteCommand": "Delete",
+ "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
+ "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
+ "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
+ "classicPolicyDetailBladeTitle": "Details",
+ "classicPolicyDisableCommand": "Disable",
+ "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
+ "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
+ "classicPolicyDisableFailTitle": "Failed to disable classic policy",
+ "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
+ "classicPolicyDisableInProgressTitle": "Disabling classic policy",
+ "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
+ "classicPolicyDisableSuccessTitle": "Classic policy disabled",
+ "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
+ "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
+ "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
+ "classicPolicyFilterAll": "All policies",
+ "classicPolicyFilterDisabled": "Disabled policies",
+ "classicPolicyFilterEnabled": "Enabled policies",
+ "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
+ "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
+ "classicPolicyIncludedPlatformsTitle": "Included device platforms",
+ "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
+ "classicPolicyMigrateCommand": "Migrate",
+ "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
+ "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
+ "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
+ "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
+ "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
+ "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
+ "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
+ "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
+ "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
+ "classicPolicySaveFailDescription": "Failed to save '{0}'",
+ "classicPolicySaveFailTitle": "Failed to save classic policy",
+ "classicPolicySaveInProgressDescription": "Saving '{0}'",
+ "classicPolicySaveInProgressTitle": "Saving classic policy",
+ "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
+ "classicPolicySaveSuccessTitle": "Classic policy saved",
+ "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
+ "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
+ "clientAppBladeTitle": "Client apps",
+ "clientAppDescription": "Select the client apps this policy will apply to",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
+ "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
+ "clientAppLegacyHeader": "Legacy authentication clients",
+ "clientAppMobileDesktop": "Mobile apps and desktop clients",
+ "clientAppModernHeader": "Modern authentication clients",
+ "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
+ "clientAppSelectSpecificClientApps": "Select client apps",
+ "clientAppWebBrowser": "Browser",
+ "clientAppsSelectedLabel": "{0} included",
+ "clientTypeBrowser": "Browser",
+ "clientTypeEas": "Exchange ActiveSync clients",
+ "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
+ "clientTypeModernAuth": "Modern authentication clients",
+ "clientTypeOtherClients": "Other clients",
+ "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
+ "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
+ "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
+ "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
+ "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
+ "cloudappsSelectorPluralExcluded": "{0} apps excluded",
+ "cloudappsSelectorPluralIncluded": "{0} apps included",
+ "cloudappsSelectorSingularExcluded": "1 app excluded",
+ "cloudappsSelectorSingularIncluded": "1 app included",
+ "cloudappsSelectorUserPlural": "{0} apps",
+ "cloudappsSelectorUserSingular": "1 app",
+ "conditionLabelMulti": "{0} conditions selected",
+ "conditionLabelOne": "1 condition selected",
+ "conditionalAccessBladeTitle": "Conditional Access",
+ "conditionsNotSelectedLabel": "Not configured",
+ "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
+ "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
+ "configureCasText": "Configure Cloud App Security",
+ "configureCustomControlsText": "Configure custom policy",
+ "controlLabelMulti": "{0} controls selected",
+ "controlLabelOne": "1 control selected",
+ "controlValidatorText": "Please select at least one control",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
+ "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
+ "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
+ "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
+ "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
+ "controlsMamInfoBubble": "Device must use these approved client applications.",
+ "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
+ "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
+ "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
+ "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
+ "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
+ "createNewVpnCert": "New certificate",
+ "createdTimeLabel": "Creation time",
+ "customRoleLabel": "Custom roles (not supported)",
+ "dateRangeTypeLabel": "Date range",
+ "daysOfWeekPlaceholderText": "Filter days of the week",
+ "daysOfWeekTypeLabel": "Days of the week",
+ "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
+ "descriptionContentForControlsAndOr": "For multiple controls",
+ "devicePlatform": "Device platform",
+ "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} included",
+ "devicePlatformIncludeExclude": "{0} and {1} excluded",
+ "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
+ "devicePlatformsNone": "None",
+ "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
+ "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
+ "deviceStateAll": "All device state",
+ "deviceStateCompliant": "Device marked as compliant",
+ "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
+ "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
+ "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
+ "deviceStateConditionSelectorLabel": "Device state (deprecated)",
+ "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
+ "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
+ "deviceStateDomainJoinedInfoLinkText": "Learn more.",
+ "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
+ "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
+ "directoryRolesLabel": "Directory roles",
+ "discardbutton": "Discard",
+ "downloadDefaultFileName": "IP Ranges",
+ "downloadExampleFileName": "Example",
+ "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
+ "duplicate": "Duplicate",
+ "duplicatePolicyName": "{0} COPY",
+ "endDatePickerLabel": "Ends",
+ "endTimePickerLabel": "End time",
+ "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
+ "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
+ "enterUserText": "No user is selected. Select a user.",
+ "evaluationResult": "Evaluation result",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
+ "excludeAllTrustedLocationSelectorText": "all trusted locations",
+ "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
+ "friday": "Friday",
+ "grantControls": "Grant controls",
+ "gridNetworkTrusted": "Trusted",
+ "gridPolicyCreatedDateTime": "Creation Date",
+ "gridPolicyEnabled": "Enabled",
+ "gridPolicyModifiedDateTime": "Modified Date",
+ "gridPolicyName": "Policy Name",
+ "gridPolicyState": "State",
+ "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
+ "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
+ "groupSelectionBladeSelect": "Select groups",
+ "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "groupsSelectionBladeTitle": "Groups",
+ "helpCommonScenariosText": "Interested in common scenarios?",
+ "helpCondition1": "When any user is outside the company network",
+ "helpCondition2": "When users in the 'Managers' group sign-in",
+ "helpConditionsTitle": "Conditions",
+ "helpControl1": "They're required to sign in with multifactor authentication",
+ "helpControl2": "They are required be on an Intune compliant or domain-joined device",
+ "helpControlsTitle": "Controls",
+ "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
+ "helpIntroTitle": "What is Conditional Access?",
+ "helpLearnMoreText": "Want to learn more about Conditional Access?",
+ "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
+ "helpStartStep2": "Specify policy Conditions and Controls",
+ "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
+ "helpStartTitle": "Get started",
+ "highRisk": "High",
+ "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
+ "includeAppsTextFormat": "Include: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
+ "includeUnknownAreasCheckboxLabel": "Include unknown areas",
+ "infoCommandLabel": "Info",
+ "invalidCertDuration": "Invalid cert duration",
+ "invalidIpAddress": "Value must be a valid IP address",
+ "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
+ "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Load all",
+ "loading": "Loading...",
+ "locationConfigureNamedLocationsText": "Configure all trusted locations",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
+ "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
+ "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
+ "locationsAllLocationsLabel": "Any location",
+ "locationsAllNamedLocationsLabel": "All trusted IPs",
+ "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
+ "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
+ "locationsSelectedPrivateLinksLabel": "Selected Private Links",
+ "lowRisk": "Low",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
+ "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
+ "markAsTrustedCheckboxLabel": "Mark as trusted location",
+ "mediumRisk": "Medium",
+ "memberSelectionCommandRemove": "Remove",
+ "menuItemClaimProviderControls": "Custom controls (Preview)",
+ "menuItemClassicPolicies": "Classic policies",
+ "menuItemInsightsAndReporting": "Insights and reporting",
+ "menuItemManage": "Manage",
+ "menuItemNamedLocationsPreview": "Named locations (Preview)",
+ "menuItemNamedNetworks": "Named locations",
+ "menuItemPolicies": "Policies",
+ "menuItemTermsOfUse": "Terms of use",
+ "modifiedTimeLabel": "Modified time",
+ "monday": "Monday",
+ "nameLabel": "Name",
+ "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
+ "namedLocationTypeCountry": "Countries/Regions",
+ "namedLocationTypeLabel": "Define the location using:",
+ "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
+ "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "You need to select at least one country/region",
+ "namedNetworkDeleteCommand": "Delete",
+ "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "namedNetworkDeleteTitle": "Are you sure?",
+ "namedNetworkDownloadIpRange": "Download",
+ "namedNetworkInvalidRange": "Value must be a valid IP range.",
+ "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
+ "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
+ "namedNetworkIpRangesTab": "IP ranges",
+ "namedNetworkListAdd": "New location",
+ "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
+ "namedNetworkNameDescription": "Example: 'Redmond office'",
+ "namedNetworkNameInvalid": "The supplied name is invalid.",
+ "namedNetworkNameRequired": "You must supply a name for this location.",
+ "namedNetworkNoIpRanges": "No IP ranges",
+ "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
+ "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
+ "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
+ "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
+ "namedNetworkNotificationCreateTitle": "Creating '{0}'",
+ "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
+ "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
+ "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
+ "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
+ "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
+ "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
+ "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
+ "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
+ "namedNetworkSearchPlaceholder": "Search locations.",
+ "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
+ "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
+ "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
+ "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
+ "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
+ "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
+ "namedNetworkUploadIpRange": "Upload",
+ "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
+ "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
+ "namedNetworksAdd": "New named location",
+ "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} and {1} excluded",
+ "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} included",
+ "namedNetworksNone": "No named locations found.",
+ "namedNetworksTitle": "Configure locations",
+ "namednetworkExceedingSizeErrorBladeTitle": "Error details",
+ "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
+ "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
+ "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
+ "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
+ "newCertName": "new cert",
+ "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
+ "noPolicyRowMessage": "No policies",
+ "noSPSelected": "No service principal selected",
+ "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
+ "noUserSelected": "No user selected",
+ "noneRisk": "No risk",
+ "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
+ "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
+ "oneUserSelected": "1 user selected",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
+ "or": "{0} OR {1} ",
+ "pickerDoneCommand": "Done",
+ "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
+ "policiesBladeTitle": "Policies",
+ "policiesBladeTitleWithAppName": "Policies: {0}",
+ "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
+ "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
+ "policyAssignmentsSection": "Assignments",
+ "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
+ "policyCloudAppsDisplayTextAllApp": "All apps",
+ "policyCloudAppsLabel": "Cloud apps",
+ "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionDevicePlatform": "Device platforms",
+ "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
+ "policyConditionLocation": "Locations",
+ "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
+ "policyConditionLocationPreview": "Locations (Preview)",
+ "policyConditionSigninRisk": "Sign-in risk",
+ "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
+ "policyConditionUserRisk": "User risk",
+ "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
+ "policyConditioniClientApp": "Client apps",
+ "policyControlAllowAccessDisplayedName": "Grant access",
+ "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
+ "policyControlBladeTitle": "Grant",
+ "policyControlBlockAccessDisplayedName": "Block access",
+ "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
+ "policyControlContentDescription": "Control access enforcement to block or grant access.",
+ "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
+ "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
+ "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
+ "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
+ "policyControlRequireMamDisplayedName": "Require approved client app",
+ "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
+ "policyControlSelectAuthStrength": "Require authentication strength",
+ "policyControlsNoControlsSelected": "0 controls selected",
+ "policyControlsSection": "Access controls",
+ "policyCreatBladeTitle": "New",
+ "policyCreateButton": "Create",
+ "policyCreateFailedMessage": "Error: {0}",
+ "policyCreateFailedTitle": "Failed to create '{0}'",
+ "policyCreateInProgressTitle": "Creating '{0}'",
+ "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyCreateSuccessTitle": "Successfully created '{0}'",
+ "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "policyDeleteFailTitle": "Failed to delete '{0}'",
+ "policyDeleteInProgressTitle": "Deleting '{0}'",
+ "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
+ "policyEnforceLabel": "Enable policy",
+ "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
+ "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
+ "policyErrorUnknown": "Something went wrong, please try again later.",
+ "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
+ "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
+ "policyNameCannotBeEmpty": "Policy name can't be empty",
+ "policyNameDevice": "Device policy",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Mobile App Management policy",
+ "policyNameMfaLocation": "Multifactor authentication and location policy",
+ "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
+ "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
+ "policyOff": "Off",
+ "policyOn": "On",
+ "policyReportOnly": "Report-only",
+ "policyReviewSection": "Review",
+ "policySaveButton": "Save",
+ "policyStatusIconDescription": "Policy is Enabled",
+ "policyStatusIconEnabled": "Enabled status icon",
+ "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
+ "policyTemplateName2": "Allow {0} access only on managed devices",
+ "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
+ "policyTriggerRiskSpecific": "Select specific risk level",
+ "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
+ "policyTriggersNoConditionsSelected": "0 conditions selected",
+ "policyTriggersSelectorLabel": "Conditions",
+ "policyUpdateFailedMessage": "Error: {0}",
+ "policyUpdateFailedTitle": "Failed to update {0}",
+ "policyUpdateInProgressTitle": "Updating {0}",
+ "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyUpdateSuccessTitle": "Successfully updated {0}",
+ "primaryCol": "Primary",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
+ "requireAllControlsText": "Require all the selected controls",
+ "requireCompliantDevice": "Require compliant device",
+ "requireDomainJoined": "Require domain-joined device",
+ "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
+ "requireMFA": "Require multifactor authentication",
+ "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
+ "requireOneControlText": "Require one of the selected controls",
+ "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
+ "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
+ "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
+ "resetFilters": "Reset filters",
+ "sPRequired": "Service principal required",
+ "sPSelectorInfoBalloon": "User or Service Principal you want to test",
+ "saturday": "Saturday",
+ "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
+ "securityDefaultsPolicyName": "Security defaults",
+ "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
+ "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
+ "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
+ "selectDevicePlatforms": "Select device platforms",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Select locations",
+ "selectedSP": "Selected Service Principal",
+ "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
+ "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
+ "servicePrincipalDataGridAria": "List of available service principals",
+ "servicePrincipalDropDownLabel": "What does this policy apply to?",
+ "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
+ "servicePrincipalRadioAll": "All owned service principals",
+ "servicePrincipalRadioSelect": "Select service principals",
+ "servicePrincipalSelectionsAria": "Selected service principals grid",
+ "servicePrincipalSelectorAria": "List of chosen service principals",
+ "servicePrincipalSelectorMultiple": "{0} service principals selected",
+ "servicePrincipalSelectorSingle": "1 service principal selected",
+ "servicePrincipalSpecificExc": "Specific service principals excluded",
+ "servicePrincipalSpecificInc": "Specific service principals included",
+ "servicePrincipals": "Service principals",
+ "sessionControlBladeTitle": "Session",
+ "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
+ "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
+ "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
+ "sessionControls": "Session controls",
+ "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
+ "sessionControlsCasLabel": "Use Conditional Access App Control",
+ "sessionControlsSecureSignInLabel": "Require token binding",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} included",
+ "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
+ "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
+ "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
+ "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
+ "specificUsersExcluded": "specific users excluded",
+ "specificUsersIncluded": "Specific users included",
+ "specificUsersIncludedAndExcluded": "Specific users excluded and included",
+ "startDatePickerLabel": "Starts",
+ "startFreeTrial": "Start a free trial",
+ "startTimePickerLabel": "Start time",
+ "sunday": "Sunday",
+ "testButton": "What If",
+ "thumbprintCol": "Thumbprint",
+ "thursday": "Thursday",
+ "timeConditionAllTimesLabel": "Any time",
+ "timeConditionIntroText": "Configure the time this policy will apply to",
+ "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
+ "timeConditionSelectorLabel": "Time (Preview)",
+ "timeConditionSpecificLabel": "Specific times",
+ "timeSelectorAllTimesText": "Any time",
+ "timeSelectorSpecificTimesText": "Specific times configured",
+ "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
+ "timeZoneDropdownLabel": "Time zone",
+ "timeZoneDropdownPlaceholderText": "Select a time zone",
+ "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
+ "tooManyPoliciesTitle": "More than 50 policies found",
+ "trustedLocationStatusIconDescription": "Location is trusted",
+ "trustedLocationStatusIconEnabled": "Trusted status icon",
+ "tuesday": "Tuesday",
+ "uploadInBadState": "Unable to upload the specified file.",
+ "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
+ "upsellAppsTitle": "Secure applications",
+ "upsellBannerText": "Get a free Premium trial to use this feature",
+ "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
+ "upsellDataTitle": "Secure data",
+ "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
+ "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
+ "upsellRiskTitle": "Protect against risk",
+ "upsellTitle": "Conditional Access",
+ "upsellWhyTitle": "Why use Conditional Access?",
+ "userAppNoneOption": "None",
+ "userNamePlaceholderText": "Enter User Name",
+ "userNotSetSeletorLabel": "0 users and groups selected",
+ "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
+ "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
+ "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
+ "userOrSPSelectionBladeTitle": "Users or workload identities",
+ "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
+ "userRequired": "User Required",
+ "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
+ "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
+ "userSPRequired": "User or Service principal required",
+ "userSPSelectorTitle": "User or Workload identity",
+ "userSelectionBladeAllUsersAndGroups": "All users and groups",
+ "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
+ "userSelectionBladeExcludeTabTitle": "Exclude",
+ "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
+ "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
+ "userSelectionBladeIncludeTabTitle": "Include",
+ "userSelectionBladeIncludedSelectorTitle": "Select",
+ "userSelectionBladeSelectUsers": "Select users",
+ "userSelectionBladeSelectedUsers": "Select users and groups",
+ "userSelectionBladeTitle": "Users and groups",
+ "userSelectorBladeTitle": "Users",
+ "userSelectorExcluded": "{0} excluded",
+ "userSelectorGroupPlural": "{0} groups",
+ "userSelectorGroupSingular": "1 group",
+ "userSelectorIncluded": "{0} included",
+ "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "userSelectorSelected": "{0} selected",
+ "userSelectorTitle": "User",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} users",
+ "userSelectorUserSingular": "1 user",
+ "userSelectorWithExclusion": "{0} and {1}",
+ "usersGroupsLabel": "Users and groups",
+ "viewApprovedAppsText": "See list of approved client apps",
+ "viewCompliantAppsText": "See list of policy protected client apps",
+ "viewPolicyInformation": "View policy information",
+ "vpnBladeTitle": "VPN connectivity",
+ "vpnCertCreateFailedMessage": "Error: {0}",
+ "vpnCertCreateFailedTitle": "Failed to create {0}",
+ "vpnCertCreateInProgressTitle": "Creating {0}",
+ "vpnCertCreateSuccessMessage": "Successfully created {0}.",
+ "vpnCertCreateSuccessTitle": "Successfully created {0}",
+ "vpnCertNoRowsMessage": "No VPN certificates found",
+ "vpnCertUpdateFailedMessage": "Error: {0}",
+ "vpnCertUpdateFailedTitle": "Failed to update {0}",
+ "vpnCertUpdateInProgressTitle": "Updating {0}",
+ "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
+ "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
+ "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
+ "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
+ "vpnMenuText": "VPN connectivity",
+ "vpncertDropdownDefaultOption": "Duration",
+ "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
+ "vpncertDropdownLabel": "Select duration",
+ "vpncertDropdownOneyearOption": "1 year",
+ "vpncertDropdownThreeyearOption": "3 years",
+ "vpncertDropdownTwoyearOption": "2 years",
+ "wednesday": "Wednesday",
+ "whatIfCountry": "Country/Region",
+ "whatIfCountryInfo": "The country/region the user is signing in from.",
+ "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
+ "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
+ "whatIfIpAddress": "IP address",
+ "whatIfIpAddressInfo": "IP address the user is signing in from.",
+ "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
+ "whatIfSelectCountry": "Select country/region...",
+ "whatIfSelectDevicePlatform": "Select device platform...",
+ "whatIfSelectPrivateLink": "Select private link...",
+ "whatIfSelectSignInRisk": "Select sign-in risk...",
+ "whatIfSignInRisk": "Sign-in risk",
+ "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
+ "whatIfUnknownAreas": "Unknown Areas",
+ "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Workload identities (preview)",
+ "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
+ "workloadIdentity": "Workload identity"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Overview"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load iOS software update profiles"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS update profile",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profile"
+ },
+ "listLoadError": "Unable to load iOS software update profiles, try again later",
+ "lowercase": "iOS update policy",
+ "uppercase": "iOS Update policy"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
+ "latestUpdate": "Latest update",
+ "noLongerSupported": "Selected version is no longer supported",
+ "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
+ "prefix": "Install iOS/iPadOS",
+ "selectSupported": "Select update version supported by Apple",
+ "updateToInstall": "Update to install"
+ },
+ "Schedule": {
+ "always": "Update at next check-in",
+ "duringTimeWindows": "Update during scheduled time",
+ "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
+ "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
+ "label": "Schedule type",
+ "outsideActiveHours": "Update outside of active hours (legacy)",
+ "outsideTimeWindows": "Update outside of scheduled time",
+ "timeWindow": "Time window",
+ "timeZone": "Time zone",
+ "title": "Update policy schedule settings:",
+ "weekly": "Weekly schedule",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
+ "label": "Select version to install"
+ },
+ "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
+ "notAvailable": "N/A"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "There are no iOS update policies to display",
+ "macOsUpdates": "There are no macOS software update policies to display",
+ "windowsUpdates": "There are no update rings for Windows 10 and later to show."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Device name",
+ "deviceUpdateStatus": "Device update status",
+ "lastUpdated": "Last updated",
+ "osVersion": "OS version",
+ "userPrincipalName": "User name"
+ },
+ "maximumOSVersionFilter": "Maximum OS version",
+ "minimumOSVersionFilter": "Minimum OS version",
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by device name, user name or OS version",
+ "title": "Account summary for macOS devices"
+ },
+ "Category": {
+ "configurationDataFile": "Configuration data file",
+ "critical": "Critical",
+ "firmware": "Firmware",
+ "other": "Other"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "successfulUpdateCount": "Successful updates deployed",
+ "totalUpdateCount": "Total updates deployed",
+ "updateCategory": "Update category",
+ "updateCategoryStatus": "Update category status"
+ },
+ "noData": "No data to display"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load macOS software update profiles"
+ }
+ },
+ "State": {
+ "available": "Available",
+ "commandFailed": "Command failed",
+ "downloadFailed": "Download failed",
+ "downloadInsufficientNetwork": "Download insufficient network",
+ "downloadInsufficientPower": "Download insufficient power",
+ "downloadInsufficientSpace": "Download insufficient space",
+ "downloaded": "Downloaded",
+ "downloading": "Downloading",
+ "idle": "Idle",
+ "installFailed": "Install failed",
+ "installInsufficientPower": "Install insufficient power",
+ "installInsufficientSpace": "Install insufficient space",
+ "installing": "Installing",
+ "scheduled": "Scheduled",
+ "success": "Success",
+ "unknown": "Unknown"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "updateName": "Update name",
+ "updateStatus": "Update status",
+ "version": "Version"
+ },
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by update name or version"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS update profile",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profile"
+ },
+ "error": "Error",
+ "errorOrErrors": "Error(s)",
+ "errors": "Errors",
+ "listLoadError": "Unable to load macOS software update profiles, try again later",
+ "lowercase": "macOs update policy",
+ "other": "Other",
+ "subtitle": "MacOS software update",
+ "upToDate": "Up to date",
+ "uppercase": "macOS Update Policy"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Please try again later",
+ "title": "Failed to delete {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Please try again later"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Please try again later",
+ "title": "Failed to load {0}"
+ },
+ "idWrongFormat": "The provided id for the profile is not in the expected format."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "At least one time window should be selected",
+ "tooMany": "A maximum of 20 time windows can be configured"
+ }
+ },
+ "endDay": "End day",
+ "endTime": "End time",
+ "startDay": "Start day",
+ "startTime": "Start time",
+ "timeWindowError": "Choose a window of time that spans at least one hour."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load update ring profiles for Windows 10 and later."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Update ring for Windows 10 and later",
+ "title": "Windows Update for Business"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 and later",
+ "title": "Update ring for Windows 10 and later"
+ },
+ "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
+ "lowercase": "Update ring",
+ "uppercase": "Update Ring"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Update policy settings",
+ "updateRingSettings": "Update ring settings"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Create {0}",
+ "edit": "Edit {0}"
+ }
+ },
+ "notScannedYet": "Not scanned yet",
+ "outOfDateIosDevices": "Out of date iOS devices"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge, version 77 and later",
+ "storeApp": "Store app",
+ "office365Suite": "Microsoft 365 Apps",
+ "microsoftDefenderATP": "Microsoft Defender for Endpoint",
+ "other": "Other",
+ "webApplication": "Web Application"
+ },
+ "Filters": {
+ "ruleSyntax": "Rule syntax",
+ "filters": "Filters"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Please select a discovery script",
+ "scriptFileLabel": "Select your discovery script"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
+ "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Script",
+ "placeholder": "Click to select",
+ "searchboxPlaceholder": "Search by script name",
+ "title": "Select a discovery script"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Custom compliance rules summary"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
+ "noFileSelectedError": "Please select a json file",
+ "parseFileSelectedError": "The json file is invalid"
+ }
+ },
"TAP": {
"AccessRequirements": {
"infoText": "Configure the PIN and credential requirements that users must meet to access apps in a work context."
@@ -1311,393 +3937,193 @@
"selectOne": "Select at least one app to create a policy."
}
},
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "CoManagementAuthority": {
- "Confirmation": {
- "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
- "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
- },
- "Grid": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
- "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
- "label": "Co-management authority"
- },
- "Header": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
- },
- "Main": {
- "title": "Co-management Authority"
- },
- "MessageSaved": {
- "body": "Co-management authority policy created."
- },
- "Notification": {
- "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
- "created": "This Co-management authority policy has not been assigned to any users.",
- "creating": "Creating Co-management authority policy",
- "creatingMessage": "Creating {0} Co-management authority policy",
- "deleteError": "An error occurred while deleting Co-management authority policy",
- "deleted": "Co-management authority policy deleted.",
- "deletedMessage": "{0} Co-management authority policy is deleted.",
- "deleting": "Deleting Co-management Authority policy",
- "deletingMessage": "Deleting {0} Co-management Authority policy",
- "fetchError": "An error occurred while displaying Co-management authority policies",
- "saved": "Co-management Authority saved.",
- "savedMessage": "{0} Co-management Authority policy successfully saved.",
- "saving": "Saving Co-management authority",
- "savingMessage": "Saving {0} Co-management authority policy"
- },
- "Priority": {
- "saveError": "An error occurred while saving Co-management authority priorities",
- "saved": "Co-management authority priorities were successfully saved."
- },
- "ReloadNotification": {
- "description": "Reload the Co-management authority policy to try again.",
- "title": "Reload the Co-management authority blade"
- },
- "advancedProperty": "Advanced",
- "commandLineArgs": "Client installation command line arguments.",
- "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
- "enterArgument": "Enter argument",
- "installAgent": "Automatically install Configuration Manager agent.",
- "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
- "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
- "pageDescription": "Co-management authority profiles",
- "pageSetting": "Co-management authority Setting",
- "pageTitle": "Co-management authority",
- "settingDescription": "The co-management settings determine who owns the workloads."
- },
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "webApp": "Web link",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "TAPSettings": {
- "AllowedDataIngestionLocations": {
- "label": "Allow users to open data from selected services",
- "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
- },
- "AndroidBackup": {
- "label": "Backup org data to Android backup services",
- "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender for Endpoint",
+ "androidDeviceOwnerApplications": "Applications",
+ "androidDeviceOwnerPolicyMessages": "Custom support information",
+ "androidForWorkPassword": "Device password",
+ "appManagement": "Allow or Block apps",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Restricted Apps",
+ "applicationVisibility": "Show or Hide Apps",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, Doc Viewing, Gaming",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Apps and experience",
+ "associatedDomains": "Associated domains",
+ "autonomousSingleAppMode": "Autonomous Single App Mode",
+ "azureOperationalInsights": "Azure operational insights",
+ "bitLocker": "Windows Encryption",
+ "bootOptions": "Boot options",
+ "browser": "Browser",
+ "builtinApps": "Built-in apps",
+ "cameras": "Cameras",
+ "cellular": "Cellular",
+ "cloudAndStorage": "Cloud and Storage",
+ "cloudPrint": "Cloud Printer",
+ "complianceEmailProfile": "Email",
+ "connectedDevices": "Connected devices",
+ "connectivity": "Cellular and connectivity",
+ "contentCaching": "Content caching",
+ "controlPanelAndSettings": "Control Panel and Settings",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Custom Compliance",
+ "customConfiguration": "Custom Configuration Profile",
+ "customOMASettings": "Custom OMA-URI Settings",
+ "customPreferences": "Preference file",
+ "dFCISecuritySettings": "Security settings",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows Firewall",
+ "defenderLocalSecurityOptions": "Local device security options",
+ "defenderSecurityCenter": "Microsoft Defender Security Center",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedCredentialAuthenticationConfiguration": "Derived credential",
+ "deviceExperience": "Device experience",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Microsoft Defender Application Control",
+ "deviceHealth": "Device Health",
+ "devicePassword": "Device password",
+ "deviceProperties": "Device Properties",
+ "deviceRestrictions": "General",
+ "deviceSecurity": "System security",
+ "display": "Display",
+ "domainJoin": "Domain Join",
+ "domains": "Domains",
+ "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge kiosk mode",
+ "editionUpgrade": "Edition Upgrade",
+ "education": "Education",
+ "educationDeviceCerts": "Device certificates",
+ "educationStudentCerts": "Student certificates",
+ "educationTakeATest": "Take a Test",
+ "educationTeacherCerts": "Teacher certificates",
+ "emailProfile": "Email",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Single sign-on app extension",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Games",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Health monitoring",
+ "homeScreenLayout": "Home Screen Layout",
+ "iOSWallpaper": "Wallpaper",
+ "importedPFX": "PKCS Imported Certificate",
+ "iosDefenderAtp": "Microsoft Defender for Endpoint",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Kernel extensions",
+ "keyboardAndDictionary": "Keyboard and dictionary",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Dedicated devices",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Kiosk web browser",
+ "lockScreenMessage": "Lock Screen Message",
+ "lockedScreenExperience": "Locked Screen Experience",
+ "logging": "Reporting and Telemetry",
+ "loginItems": "Login items",
+ "loginWindow": "Login window",
+ "macDefenderAtp": "Microsoft Defender for Endpoint",
+ "maintenance": "Maintenance",
+ "malware": "Malware",
+ "messaging": "Messaging",
+ "microphonesAndSpeakers": "Microphones and speakers",
+ "networkBoundary": "Network boundary",
+ "networkProxy": "Network proxy",
+ "notifications": "App Notifications",
+ "pKCS": "PKCS Certificate",
+ "password": "Password",
+ "personalProfile": "Personal profile",
+ "personalization": "Personalization",
+ "policyOverride": "Override Group Policy",
+ "ports": "Ports",
+ "powerSettings": "Power Settings",
+ "printer": "Printer",
+ "privacy": "Privacy",
+ "privacyPerApp": "Per-app privacy exceptions",
+ "privacyPreferences": "Privacy preferences",
+ "projection": "Projection",
+ "radios": "Radios",
+ "sCCMCompliance": "Configuration Manager Compliance",
+ "sCEP": "SCEP Certificate",
+ "sCEPProperties": "SCEP Certificate",
+ "sMode": "Mode switch (Windows Insider only)",
+ "safari": "Safari",
+ "search": "Search",
+ "session": "Session",
+ "sharedDevice": "Shared iPad",
+ "sharedPCAccountManager": "Shared multi-user device",
+ "singleSignOn": "Single sign-on",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Settings",
+ "start": "Start",
+ "systemExtensions": "System extensions",
+ "systemSecurity": "System Security",
+ "trustedCert": "Trusted Certificate",
+ "uEFIAccess": "UEFI access",
+ "updates": "Updates",
+ "userRights": "User Rights",
+ "usersAndAccounts": "Users and Accounts",
+ "vPN": "Base VPN",
+ "vPNApps": "Automatic VPN",
+ "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
+ "vPNConditionalAccess": "Conditional Access",
+ "vPNConnectivity": "Connectivity",
+ "vPNDNSTriggers": "DNS Settings",
+ "vPNIKEv2": "IKEv2 settings",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Split Tunneling",
+ "vPNTrustedNetwork": "Trusted Network Detection",
+ "wakeSettings": "Wake settings",
+ "webContentFilter": "Web Content Filter",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender for Endpoint",
+ "windowsDefenderATP": "Microsoft Defender for Endpoint",
+ "windowsHelloForBusiness": "Windows Hello for Business",
+ "windowsSpotlight": "Windows Spotlight",
+ "wiredNetwork": "Wired network",
+ "wireless": "Wireless",
+ "wirelessProjection": "Wireless projection",
+ "workProfile": "Work profile settings",
+ "workProfilePassword": "Work profile password",
+ "xboxServices": "Xbox services",
+ "zebraMx": "MX profile (Zebra only)",
+ "complianceActionsLabel": "Actions for noncompliance"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Allowed URLs",
+ "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
},
- "AndroidBiometricAuthentication": {
- "label": "Biometrics instead of PIN for access",
- "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
- },
- "AndroidFingerprint": {
- "label": "Fingerprint instead of PIN for access (Android 6.0+)",
- "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
- },
- "AndroidOverrideFingerprint": {
- "label": "Override biometrics with PIN after timeout"
- },
- "AppPIN": {
- "label": "App PIN when device PIN is set",
- "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
- },
- "BlockDataIngestionIntoOrganizationDocuments": {
- "label": "Open data into Org documents",
- "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
- "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
- "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
- "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
- },
- "ConnectToVpnOnLaunch": {
- "label": "Start Microsoft Tunnel connection on app-launch",
- "tooltip": "Allow connection to VPN when app is launch"
- },
- "CredentialsForAccess": {
- "label": "Work or school account credentials for access",
- "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
- },
- "CustomBrowserDisplayName": {
- "label": "Unmanaged Browser Name",
- "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
- },
- "CustomBrowserPackageId": {
- "label": "Unmanaged Browser ID",
- "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
- },
- "CustomBrowserProtocol": {
- "label": "Unmanaged browser protocol",
- "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
- },
- "DialerRestrictionLevel": {
- "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
- "label": "Transfer telecommunication data to",
- "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "EncryptData": {
- "label": "Encrypt org data",
- "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
- },
- "EncryptDataAndroid": {
- "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
- },
- "EncryptDataIos": {
- "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 128-bit AES encryption to app data.",
- "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
- "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
- },
- "EncryptDataOnEnrolledDevices": {
- "label": "Encrypt org data on enrolled devices",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
- },
- "IOSBackup": {
- "label": "Backup org data to iTunes and iCloud backups",
- "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
- },
- "IOSFaceID": {
- "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
- "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
- },
- "IOSOverrideTouchId": {
- "label": "Override biometrics with PIN after timeout"
- },
- "IOSTouchId": {
- "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
- "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
- },
- "MessagingRedirectAppDisplayName": {
- "label": "Messaging App Name"
- },
- "MessagingRedirectAppPackageId": {
- "label": "Messaging App Package ID"
+ "ApplicationProxyRedirection": {
+ "header": "Application proxy",
+ "title": "Application proxy redirection",
+ "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
},
- "MessagingRedirectAppUrlScheme": {
- "label": "Messaging App URL Scheme"
- },
- "NotificationRestriction": {
- "label": "Org data notifications",
- "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
- },
- "OpenLinksManagedBrowser": {
- "label": "Restrict web content transfer with other apps",
- "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
- },
- "OverrideBiometric": {
- "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
- },
- "PinAccess": {
- "label": "PIN for access",
- "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
- },
- "PinLength": {
- "label": "Select minimum PIN length",
- "tooltip": "This setting specifies the minimum number of digits of a PIN."
- },
- "PinType": {
- "label": "PIN type",
- "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
- },
- "Printing": {
- "label": "Printing org data",
- "tooltip": "If blocked, the app cannot print protected data."
- },
- "ProtectedMessagingRedirectAppType": {
- "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
- "label": "Transfer messaging data to",
- "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "ReceiveData": {
- "label": "Receive data from other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ "BlockedURLs": {
+ "title": "Blocked URLs",
+ "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
+ },
+ "Bookmarks": {
+ "header": "Managed bookmarks",
+ "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
+ "uRL": "URL"
},
- "RecheckAccessAfter": {
- "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
- "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
- },
- "RequireClass3Biometrics": {
- "label": "Class 3 Biometrics (Android 9.0+)",
- "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
- },
- "RequirePinAfterBiometricChange": {
- "label": "Override Biometrics with PIN after biometric updates",
- "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
- },
- "RestrictKeyboards": {
- "duplicatePackageError": "The package ID must be unique.",
- "invalidPackageError": "Invalid package ID",
- "label": "Approved keyboards",
- "select": "Select keyboards to approve",
- "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
- "title": "Add approved keyboards",
- "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
- },
- "SaveData": {
- "label": "Save copies of org data",
- "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
- },
- "SaveDataToSelected": {
- "label": "Allow user to save copies to selected services",
- "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
- },
- "ScreenCaptureAndAndroidAssistant": {
- "label": "Screen capture and Google Assistant\n",
- "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
- },
- "SendData": {
- "label": "Send org data to other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
- },
- "SimplePin": {
- "label": "Simple PIN",
- "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
- },
- "SyncContacts": {
- "label": "Sync policy managed app data with native apps or add-ins"
- },
- "ThirdPartyKeyboards": {
- "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
- "label": "Third party keyboards"
- },
- "Timeout": {
- "label": "Timeout (minutes of inactivity)"
- },
- "WinCutCopyPaste": {
- "label": "Allow cut, copy, and paste for",
- "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
- },
- "WinPrintData": {
- "label": "Print org data",
- "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
- },
- "WinReceiveData": {
- "label": "Receive data from",
- "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
- },
- "WinSendData": {
- "label": "Send org data to",
- "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
- },
- "Tap": {
- "numberOfDays": "Number of days",
- "pinResetAfterNumberOfDays": "PIN reset after number of days",
- "previousPinBlockCount": "Select number of previous PIN values to maintain"
- }
- },
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "One block action is required for all compliance policies.",
- "graceperiod": "Schedule (days after noncompliance)",
- "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
- "subtitle": "Specify action parameters",
- "title": "Action parameters"
- },
- "List": {
- "gracePeriodDay": "{0} day after noncompliance",
- "gracePeriodDays": "{0} days after noncompliance",
- "gracePeriodHour": "{0} hour after noncompliance",
- "gracePeriodHours": "{0} hours after noncompliance",
- "gracePeriodMinute": "{0} minute after noncompliance",
- "gracePeriodMinutes": "{0} minutes after noncompliance",
- "immediately": "Immediately",
- "schedule": "Schedule",
- "scheduleInfoBalloon": "Days after noncompliance",
- "subtitle": "Specify the sequence of actions on noncompliant devices",
- "title": "Actions"
- },
- "Notification": {
- "additionalEmailLabel": "Others",
- "additionalRecipients": "Additional recipients (via email)",
- "additionalRecipientsBladeTitle": "Select additional recipients",
- "emailAddressPrompt": "Enter email addresses (separated by commas)",
- "invalidEmail": "Invalid email address",
- "messageTemplate": "Message template",
- "noneSelected": "None selected",
- "notSelected": "Not selected",
- "numSelected": "{0} selected",
- "selected": "Selected"
- },
- "block": "Mark device noncompliant",
- "lockDevice": "Lock device (local action)",
- "lockDeviceWithPasscode": "Lock device (local action)",
- "noAction": "No action",
- "noActionRow": "No actions, select 'Add' to add an action",
- "pushNotification": "Send push notification to end user",
- "remoteLock": "Remotely lock the noncompliant device",
- "removeSourceAccessProfile": "Remove source access profile",
- "retire": "Add device to retire list",
- "wipe": "Wipe",
- "emailNotification": "Send email to end user"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "required": "Required",
- "uninstall": "Uninstall"
+ "HomepageURL": {
+ "header": "Managed homepage",
+ "title": "Homepage shortcut URL",
+ "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Redirect restricted sites to personal context",
+ "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
+ }
},
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Create custom script",
- "edit": "Edit custom script"
- },
- "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
- "customScriptCapitalized": "Custom script",
- "customScriptLowercase": "custom script",
- "detectionScript": "Detection script"
- },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home Sku",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Select the number of bits contained in the key.",
- "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
- "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
- "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
- "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Subject alternative name",
- "subjectNameFormat": "Subject name format",
- "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
- },
- "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
- "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
- "configurationSettingsFormat": "Configuration settings format text",
- "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
- "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
- "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
- "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Select runtime permissions for the associated app.",
- "policyAssociatedApp": "Select the app that this policy will be associated with.",
- "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
- "policyDescription": "Optionally, enter a description for this configuration policy.",
- "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
- "policyName": "Enter a name for this configuration policy.",
- "policyPlatform": "Select the platform this app configuration policy will apply to.",
- "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
- "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
- "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
- "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
- "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
- "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
- "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
- "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
- "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
- "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
- "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
- "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
- },
+ "Languages": {
+ "ar-aE": "Arabic (U.A.E.)",
+ "ar-bH": "Arabic (Bahrain)",
+ "ar-dZ": "Arabic (Algeria)",
+ "ar-eG": "Arabic (Egypt)",
+ "ar-iQ": "Arabic (Iraq)",
+ "ar-jO": "Arabic (Jordan)",
+ "ar-kW": "Arabic (Kuwait)",
+ "ar-lB": "Arabic (Lebanon)",
+ "ar-lY": "Arabic (Libya)",
+ "ar-mA": "Arabic (Morocco)",
+ "ar-oM": "Arabic (Oman)",
+ "ar-qA": "Arabic (Qatar)",
+ "ar-sA": "Arabic (Saudi Arabia)",
+ "ar-sY": "Arabic (Syria)",
+ "ar-tN": "Arabic (Tunisia)",
+ "ar-yE": "Arabic (Yemen)",
+ "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
+ "az-latn": "Azerbaijani (Latin, Azerbaijan)",
+ "bn-bD": "Bangla (Bangladesh)",
+ "bn-iN": "Bangla (India)",
+ "bs-cyrl": "Bosnian (Cyrillic)",
+ "bs-latn": "Bosnian (Latin)",
+ "zh-cN": "Chinese (PRC)",
+ "zh-hK": "Chinese (Hong Kong S.A.R.)",
+ "zh-mO": "Chinese (Macao S.A.R.)",
+ "zh-sG": "Chinese (Singapore)",
+ "zh-tW": "Chinese (Taiwan)",
+ "hr-bA": "Croatian (Latin)",
+ "hr-hR": "Croatian (Croatia)",
+ "nl-bE": "Dutch (Belgium)",
+ "nl-nL": "Dutch (Netherlands)",
+ "en-aU": "English (Australia)",
+ "en-bZ": "English (Belize)",
+ "en-cA": "English (Canada)",
+ "en-cabn": "English (Caribbean)",
+ "en-iE": "English (Ireland)",
+ "en-iN": "English (India)",
+ "en-jM": "English (Jamaica)",
+ "en-mY": "English (Malaysia)",
+ "en-nZ": "English (New Zealand)",
+ "en-pH": "English (Republic of the Philippines)",
+ "en-sG": "English (Singapore)",
+ "en-tT": "English (Trinidad and Tobago)",
+ "en-uK": "English (United Kingdom)",
+ "en-uS": "English (United States)",
+ "en-zA": "English (South Africa)",
+ "en-zW": "English (Zimbabwe)",
+ "fr-bE": "French (Belgium)",
+ "fr-cA": "French (Canada)",
+ "fr-cH": "French (Switzerland)",
+ "fr-fR": "French (France)",
+ "fr-lU": "French (Luxembourg)",
+ "fr-mC": "French (Monaco)",
+ "de-aT": "German (Austria)",
+ "de-cH": "German (Switzerland)",
+ "de-dE": "German (Germany)",
+ "de-lI": "German (Liechtenstein)",
+ "de-lU": "German (Luxembourg)",
+ "iu-cans": "Inuktitut (Syllabics, Canada)",
+ "iu-latn": "Inuktitut (Latin, Canada)",
+ "it-cH": "Italian (Switzerland)",
+ "it-iT": "Italian (Italy)",
+ "ms-bN": "Malay (Brunei Darussalam)",
+ "ms-mY": "Malay (Malaysia)",
+ "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
+ "mn-mN": "Mongolian (Cyrillic, Mongolia)",
+ "no-nB": "Norwegian, Bokmål (Norway)",
+ "no-nn": "Norwegian, Nynorsk (Norway)",
+ "pt-bR": "Portuguese (Brazil)",
+ "pt-pT": "Portuguese (Portugal)",
+ "quz-bO": "Quechua (Bolivia)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Peru)",
+ "smj-nO": "Sami, Lule (Norway)",
+ "smj-sE": "Sami, Lule (Sweden)",
+ "se-fI": "Sami, Northern (Finland)",
+ "se-nO": "Sami, Northern (Norway)",
+ "se-sE": "Sami, Northern (Sweden)",
+ "sma-nO": "Sami, Southern (Norway)",
+ "sma-sE": "Sami, Southern (Sweden)",
+ "smn": "Sami, Inari (Finland)",
+ "sms": "Sami, Skolt (Finland)",
+ "sr-Cyrl-bA": "Serbian (Cyrillic)",
+ "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
+ "sr-Latn-bA": "Serbian (Latin)",
+ "sr-Latn-rS": "Serbian (Latin, Serbia)",
+ "dsb": "Lower Sorbian (Germany)",
+ "hsb": "Upper Sorbian (Germany)",
+ "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
+ "es-aR": "Spanish (Argentina)",
+ "es-bO": "Spanish (Bolivia)",
+ "es-cL": "Spanish (Chile)",
+ "es-cO": "Spanish (Colombia)",
+ "es-cR": "Spanish (Costa Rica)",
+ "es-dO": "Spanish (Dominican Republic)",
+ "es-eC": "Spanish (Ecuador)",
+ "es-eS": "Spanish (Spain)",
+ "es-gT": "Spanish (Guatemala)",
+ "es-hN": "Spanish (Honduras)",
+ "es-mX": "Spanish (Mexico)",
+ "es-nI": "Spanish (Nicaragua)",
+ "es-pA": "Spanish (Panama)",
+ "es-pE": "Spanish (Peru)",
+ "es-pR": "Spanish (Puerto Rico)",
+ "es-pY": "Spanish (Paraguay)",
+ "es-sV": "Spanish (El Salvador)",
+ "es-uS": "Spanish (United States)",
+ "es-uY": "Spanish (Uruguay)",
+ "es-vE": "Spanish (Venezuela)",
+ "sv-fI": "Swedish (Finland)",
+ "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
+ "uz-latn": "Uzbek (Latin, Uzbekistan)",
+ "af": "Afrikaans (South Africa)",
+ "sq": "Albanian (Albania)",
+ "am": "Amharic (Ethiopia)",
+ "hy": "Armenian (Armenia)",
+ "as": "Assamese (India)",
+ "ba": "Bashkir (Russia)",
+ "eu": "Basque (Basque)",
+ "be": "Belarusian (Belarus)",
+ "br": "Breton (France)",
+ "bg": "Bulgarian (Bulgaria)",
+ "ca": "Catalan (Catalan)",
+ "co": "Corsican (France)",
+ "cs": "Czech (Czech Republic)",
+ "da": "Danish (Denmark)",
+ "dv": "Divehi (Maldives)",
+ "et": "Estonian (Estonia)",
+ "fo": "Faroese (Faroe Islands)",
+ "fil": "Filipino (Philippines)",
+ "fi": "Finnish (Finland)",
+ "gl": "Galician (Galician)",
+ "ka": "Georgian (Georgia)",
+ "el": "Greek (Greece)",
+ "gu": "Gujarati (India)",
+ "ha": "Hausa (Latin, Nigeria)",
+ "he": "Hebrew (Israel)",
+ "hi": "Hindi (India)",
+ "hu": "Hungarian (Hungary)",
+ "is": "Icelandic (Iceland)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonesian (Indonesia)",
+ "ga": "Irish (Ireland)",
+ "xh": "isiXhosa (South Africa)",
+ "zu": "isiZulu (South Africa)",
+ "ja": "Japanese (Japan)",
+ "kn": "Kannada (India)",
+ "kk": "Kazakh (Kazakhstan)",
+ "km": "Khmer (Cambodia)",
+ "rw": "Kinyarwanda (Rwanda)",
+ "sw": "Kiswahili (Kenya)",
+ "kok": "Konkani (India)",
+ "ko": "Korean (Korea)",
+ "ky": "Kyrgyz (Kyrgyzstan)",
+ "lo": "Lao (Lao P.D.R.)",
+ "lv": "Latvian (Latvia)",
+ "lt": "Lithuanian (Lithuania)",
+ "lb": "Luxembourgish (Luxembourg)",
+ "mk": "Macedonian (North Macedonia)",
+ "ml": "Malayalam (India)",
+ "mt": "Maltese (Malta)",
+ "mi": "Maori (New Zealand)",
+ "mr": "Marathi (India)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepali (Nepal)",
+ "oc": "Occitan (France)",
+ "or": "Odia (India)",
+ "ps": "Pashto (Afghanistan)",
+ "fa": "Persian",
+ "pl": "Polish (Poland)",
+ "pa": "Punjabi (India)",
+ "ro": "Romanian (Romania)",
+ "rm": "Romansh (Switzerland)",
+ "ru": "Russian (Russia)",
+ "sa": "Sanskrit (India)",
+ "st": "Sesotho sa Leboa (South Africa)",
+ "tn": "Setswana (South Africa)",
+ "si": "Sinhala (Sri Lanka)",
+ "sk": "Slovak (Slovakia)",
+ "sl": "Slovenian (Slovenia)",
+ "sv": "Swedish (Sweden)",
+ "syr": "Syriac (Syria)",
+ "tg": "Tajik (Cyrillic, Tajikistan)",
+ "ta": "Tamil (India)",
+ "tt": "Tatar (Russia)",
+ "te": "Telugu (India)",
+ "th": "Thai (Thailand)",
+ "bo": "Tibetan (PRC)",
+ "tr": "Turkish (Turkey)",
+ "tk": "Turkmen (Turkmenistan)",
+ "uk": "Ukrainian (Ukraine)",
+ "ur": "Urdu (Islamic Republic of Pakistan)",
+ "vi": "Vietnamese (Vietnam)",
+ "cy": "Welsh (United Kingdom)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (PRC)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Built-in Role",
+ "customCloudPCRole": "Custom Windows 365 role",
+ "customIntuneRole": "Custom Intune role",
+ "customRole": "Custom Role"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "App Version",
+ "dependencyName": "Dependency name",
+ "lastModifiedTime": "Last modified time",
+ "relationship": "Relationship",
+ "replaced": "Replaced",
+ "searchPlaceholder": "Filter by app name",
+ "status": "Status details",
+ "statusDetails": "Status",
+ "supersedenceName": "Supersedence name"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Child dependency",
+ "indirectSupersedence": "Not directly related",
+ "supersedenceAncestors": "Superseding",
+ "supersedenceDescendants": "Superseded"
+ },
+ "SupersededReplaced": {
+ "no": "No",
+ "yes": "Yes"
+ },
+ "Tabs": {
+ "chart": "Chart",
+ "dependency": "Dependency",
+ "label": "View: ",
+ "supersedence": "Supersedence",
+ "table": "Table"
+ },
+ "dependencyGraphAriaLabel": "App dependency chart",
+ "supersedenceGraphAriaLabel": "App supersedence chart"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Number of days to wait before restart is enforced"
+ },
+ "Description": {
+ "label": "Description"
+ },
+ "Name": {
+ "label": "Name"
+ },
+ "QualityUpdateRelease": {
+ "label": "Expedite installation of quality updates if device OS version less than:"
+ },
+ "bladeTitle": "Quality updates Windows 10 and later (preview)",
+ "loadError": "Loading failed!"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Settings"
+ },
+ "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
+ "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
+ "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ },
+ "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
+ "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
+ "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
+ "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
+ "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
+ "appSharingToLevel3": "{0}: Allow sending org data to any app",
+ "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
+ "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
+ "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
+ "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
+ "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
+ "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
+ "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
+ "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
+ "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
+ "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
+ "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
+ "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
+ "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
+ "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
+ "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
+ "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
+ "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
+ "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
+ "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
+ "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
+ "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
+ "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
+ "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
+ "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
+ "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
+ "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
+ "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
+ "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
+ "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
+ "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
+ "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
+ "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
+ "checkInput": "Check input for validity",
+ "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
+ "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
+ "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
+ "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
+ "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
+ "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
+ "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
+ "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
+ "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
+ "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
+ "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
+ "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
+ "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
+ "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
+ "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
+ "name": "The name of this network boundary",
+ "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
+ "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
+ "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
+ "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
+ "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
+ "protectUnderLock": "Protects app content while the device is in a locked state.",
+ "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
+ "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
+ "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
+ "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
+ "required": "Required",
+ "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
+ "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
+ "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
+ "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
+ "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ },
+ "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Create custom script",
+ "edit": "Edit custom script"
+ },
+ "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
+ "customScriptCapitalized": "Custom script",
+ "customScriptLowercase": "custom script",
+ "detectionScript": "Detection script"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Default",
+ "header": "Update Priority",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Auto-update",
+ "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Allow user to snooze the restart notification",
+ "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
+ "durationInMinutes": "Device restart grace period (minutes)",
+ "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Time zone",
+ "local": "Device time zone",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Date and time",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
+ "deadlineTimeLabel": "App installation deadline",
+ "defaultTime": "As soon as possible",
+ "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
+ "specificTime": "A specific date and time",
+ "startTimeColumnLabel": "Availability",
+ "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
+ "startTimeLabel": "App availability"
+ },
+ "restartGracePeriodHeader": "Restart grace period",
+ "restartGracePeriodLabel": "Device restart grace period",
+ "summaryTitle": "End user experience"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Assign custom attribute to at least one group. Go to Properties to edit assignments.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Shell script",
"successfullySavedPolicy": "Saved {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64-bit",
+ "thirtyTwoBit": "32-bit"
+ },
+ "Countries": {
+ "ae": "United Arab Emirates",
+ "ag": "Antigua and Barbuda",
+ "ai": "Anguilla",
+ "al": "Albania",
+ "am": "Armenia",
+ "ao": "Angola",
+ "ar": "Argentina",
+ "at": "Austria",
+ "au": "Australia",
+ "az": "Azerbaijan",
+ "bb": "Barbados",
+ "be": "Belgium",
+ "bf": "Burkina Faso",
+ "bg": "Bulgaria",
+ "bh": "Bahrain",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolivia",
+ "br": "Brazil",
+ "bs": "Bahamas",
+ "bt": "Bhutan",
+ "bw": "Botswana",
+ "by": "Belarus",
+ "bz": "Belize",
+ "ca": "Canada",
+ "cg": "Republic Of Congo",
+ "ch": "Switzerland",
+ "cl": "Chile",
+ "cn": "China",
+ "co": "Colombia",
+ "cr": "Costa Rica",
+ "cv": "Cape Verde",
+ "cy": "Cyprus",
+ "cz": "Czech Republic",
+ "de": "Germany",
+ "dk": "Denmark",
+ "dm": "Dominica",
+ "do": "Dominican Republic",
+ "dz": "Algeria",
+ "ec": "Ecuador",
+ "ee": "Estonia",
+ "eg": "Egypt",
+ "es": "Spain",
+ "fi": "Finland",
+ "fj": "Fiji",
+ "fm": "Federated States Of Micronesia",
+ "fr": "France",
+ "gb": "United Kingdom",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Greece",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hong Kong",
+ "hn": "Honduras",
+ "hr": "Croatia",
+ "hu": "Hungary",
+ "id": "Indonesia",
+ "ie": "Ireland",
+ "il": "Israel",
+ "in": "India",
+ "is": "Iceland",
+ "it": "Italy",
+ "jm": "Jamaica",
+ "jo": "Jordan",
+ "jp": "Japan",
+ "ke": "Kenya",
+ "kg": "Kyrgyzstan",
+ "kh": "Cambodia",
+ "kn": "St. Kitts and Nevis",
+ "kr": "Republic Of Korea",
+ "kw": "Kuwait",
+ "ky": "Cayman Islands",
+ "kz": "Kazakstan",
+ "la": "Lao People’s Democratic Republic",
+ "lb": "Lebanon",
+ "lc": "St. Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Lithuania",
+ "lu": "Luxembourg",
+ "lv": "Latvia",
+ "md": "Republic Of Moldova",
+ "mg": "Madagascar",
+ "mk": "North Macedonia",
+ "ml": "Mali",
+ "mn": "Mongolia",
+ "mo": "Macau",
+ "mr": "Mauritania",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Mexico",
+ "my": "Malaysia",
+ "mz": "Mozambique",
+ "na": "Namibia",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Netherlands",
+ "no": "Norway",
+ "np": "Nepal",
+ "nz": "New Zealand",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua New Guinea",
+ "ph": "Philippines",
+ "pk": "Pakistan",
+ "pl": "Poland",
+ "pt": "Portugal",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Romania",
+ "ru": "Russia",
+ "sa": "Saudi Arabia",
+ "sb": "Solomon Islands",
+ "sc": "Seychelles",
+ "se": "Sweden",
+ "sg": "Singapore",
+ "si": "Slovenia",
+ "sk": "Slovakia",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Suriname",
+ "st": "Sao Tome and Principe",
+ "sv": "El Salvador",
+ "sz": "Swaziland",
+ "tc": "Turks and Caicos",
+ "td": "Chad",
+ "th": "Thailand",
+ "tj": "Tajikistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunisia",
+ "tr": "Turkey",
+ "tt": "Trinidad and Tobago",
+ "tw": "Taiwan",
+ "tz": "Tanzania",
+ "ua": "Ukraine",
+ "ug": "Uganda",
+ "us": "United States",
+ "uy": "Uruguay",
+ "uz": "Uzbekistan",
+ "vc": "St. Vincent and The Grenadines",
+ "ve": "Venezuela",
+ "vg": "British Virgin Islands",
+ "vn": "Vietnam",
+ "ye": "Yemen",
+ "za": "South Africa",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "This setting is not configurable via OMA-URI, as it is available in the settings catalog. Please navigate to the settings catalog to configure this setting."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Select a configuration profile file"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "These settings work for devices that were enrolled with or without user approval through device enrollment, and for devices enrolled with automated device enrollment (formerly DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Device enrollment and automated device enrollment",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Device enrollment and automated device enrollment",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
+ "deviceExperienceTypeDescription": "Based on the experience you want to configure, select Kiosk Mode or Microsoft Launcher to start configuring the experience on your devices. If you don't select a device experience type, users will see the device's default home screen experience.",
+ "deviceExperienceTypeKioskMode": "Kiosk mode (dedicated and fully managed)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft launcher (fully managed only)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Show",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
+ "deviceExperienceTypeName": "Device experience type",
"deviceGuardCredentialGuardDescription": "Enabling with UEFI lock ensures that Credential Guard cannot be remotely disabled. Enabling without UEFI lock allows Credential Guard to be disabled remotely via Group Policy.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune Device ID",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Number of days before transitioning from Auto Restarts scheduled outside of active hours to Engaged Restart, which requires the user to schedule.",
"engagedRestartTransitionScheduleName": "Transition users to engaged restart after an auto-restart (days)",
"enhancedOption": "Enhanced (1903 and earlier)",
- "enrollmentProfileTypeDedicatedDevice": "Dedicated device",
- "enrollmentProfileTypeDescription": "Select an enrollment profile type to start configuring Microsoft Launcher or Microsoft Managed Home Screen on your devices. If you don't select a profile type, users will see the device's default home screen experience.",
- "enrollmentProfileTypeFullyManaged": "Fully managed",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Show",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
- "enrollmentProfileTypeName": "Enrollment profile type",
"enrollmentSettingsHeading": "Enrollment Settings",
"enterOnlyOneForDns": "Enter a list of DNS servers and/or a proxy server.",
"enterpriseModeLoggingExample": "e.g. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Fully managed and corporate-owned work profile devices",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "These settings only work for fully managed and dedicated devices.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Fully managed and dedicated devices",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "These settings only work for fully managed and dedicated devices operating with a kiosk policy.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Fully managed and dedicated devices (kiosk mode only)",
"gameCenterBlockedMacDescription": "Yes disables Game Center, and the Game Center icon is removed from the Home screen. Available for devices running macOS versions 10.13 or later.",
"gameCenterBlockedMacName": "Block Game Center",
"gamingPageDescription": "Block access to Gaming in Settings app.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Configures the logon type to access the applications on this kiosk device.",
"kioskShowTaskbarDesc": "Show or hide the Windows taskbar on the kiosk.",
"kioskShowTaskbarName": "Windows Taskbar",
+ "kioskSingleInfoBoxText": "Single app kiosk mode – Locks the device to run the selected app. To use this mode, you must first approve and assign the selected app from the client apps workload. On fully managed devices, the only selected app that will apply is Managed Home Screen. All other apps will be treated as a required app instead.",
"kioskStartDateTime": "Maintenance Window Start Time",
"kioskStartMenuLayoutXmlDesc": "Provide an XML layout that defines in what order apps should be displayed on the Start Menu",
"kioskStartMenuLayoutXmlDescV2": "Importing an XML file configuring the Start layout overrides the existing display order and tile size selections. Learn more",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Must be a valid file path",
"mustBeAValidHttpsUrl": "Must be a valid https url",
"mustBeAValidIPAddress": "Must be a valid IP address (e.g. 192.168.0.1 or 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Value must be a valid IP address or FQDN with optional port number.",
"mustBeAValidIPv4Address": "Must be a valid IPv4 address (e.g. 192.168.0.1)",
"mustBeAValidIPv6Address": "Must be a valid IPv6 address (e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Must be a valid image URL such as www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Windows Firewall rules from the local store (Public networks)",
"publicNetworkName": "Public (non-discoverable) network",
"publicOutboundConnectionsSummaryLabel": "Default action for outbound connections (Public networks)",
- "publicPlayStoreEnabledDescription": "Users get access to all apps, except the ones you’ve required uninstall in Client Apps. If you choose \"Not configured\" for this setting, users can only access the apps you’ve listed as available or required in Client Apps.",
+ "publicPlayStoreEnabledDescription": "If you select \"Allow\", users get access to all apps, except the ones you've required uninstall in Client Apps. If you choose \"Block\" or \"Not configured\" for this setting, users can only access the apps you've listed as available or required in Client Apps.",
"publicPlayStoreEnabledName": "Allow access to all apps in Google Play store",
- "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Not configured\", all apps not explicitly allowed for the user will be removed from the device.",
+ "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Block\" or \"Not configured\", all apps will be removed from the device, except apps you've listed as available or required in Client Apps.",
+ "publicPlayStoreSelectionAllowList": "Block",
+ "publicPlayStoreSelectionBlockList": "Allow",
+ "publicPlayStoreSelectionNotConfigured": "Not configured",
"publicShieldedSummaryLabel": "Shielded (Public networks)",
"publicStealthModeSummaryLabel": "Stealth mode (Public networks)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Unicast responses to multicast broadcasts (Public networks)",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Device",
"licenseTypeUser": "User"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Property",
- "rule": "Rule",
- "ruleDetails": "Rule Details",
- "value": "Value"
- },
- "assignIf": "Assign profile if",
- "deleteWarning": "This will delete the selected Applicability Rule",
- "dontAssignIf": "Don't assign profile if",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "and {0} more",
- "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
- "maxText": "Max",
- "minText": "Min",
- "noActionRow": "No Applicability Rules Specified",
- "oSVersion": "e.g. 1.2.3.4",
- "toText": "to",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "OS edition",
- "windows10OsVersion": "OS version",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Equals",
- "greaterThan": "Greater than",
- "greaterThanOrEqualTo": "Greater than or equal to",
- "lessThan": "Less than",
- "lessThanOrEqualTo": "Less than or equal to",
- "notEqualTo": "Not equal to"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Enforce script signature check and run script silently",
- "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
- "header": "Use a custom detection script",
- "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
- "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileNotSelectedValidation": "No script file is selected.",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
- "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Date created",
- "dateModified": "Date modified",
- "doesNotExist": "File or folder does not exist",
- "fileOrFolderExists": "File or folder exists",
- "sizeInMB": "Size in MB",
- "version": "String (version)"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "fileOrFolder": "File or folder",
- "fileOrFolderToolTip": "The file or folder to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "path": "Path",
- "pathTooltip": "The full path of the folder containing the file or folder to detect.",
- "value": "Value",
- "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
- },
- "GridColumns": {
- "pathOrCode": "Path/Code",
- "type": "Type"
- },
- "MsiRule": {
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
- "productCode": "MSI product code",
- "productCodeTooltip": "A valid MSI product code for the app.",
- "productVersion": "Value",
- "productVersionCheck": "MSI product version check",
- "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
- "productVersionTooltip": "Enter the MSI product version for the app."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Integer comparison",
- "keyDoesNotExist": "Key does not exist",
- "keyExists": "Key exists",
- "stringComparison": "String comparison",
- "valueDoesNotExist": "Value does not exist",
- "valueExists": "Value exists",
- "versionComparison": "Version comparison"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "value": "Value",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the registry value to detect.",
- "valueTooltip": "Select a value that matches the selected detection method."
- },
- "RuleTypeOptions": {
- "file": "File",
- "mSI": "MSI",
- "registry": "Registry"
- },
- "gridAriaLabel": "Detection Rules",
- "header": "Create a rule that indicates the presence of the app.",
- "noRulesSelectedPlaceholder": "No rules are specified.",
- "ruleTableLimit": "You can add up to 25 detection rules",
- "ruleType": "Rule type",
- "ruleTypeTooltip": "Choose the type of detection rule to add."
- },
- "RuleConfigurationOptions": {
- "customScript": "Use a custom detection script",
- "manual": "Manually configure detection rules"
- },
- "bladeTitle": "Detection rules",
- "header": "Configure app specific rules used to detect the presence of the app.",
- "rulesFormat": "Rules format",
- "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
- "selectorLabel": "Detection rules"
+ "BooleanActions": {
+ "allow": "Allow",
+ "block": "Block",
+ "configured": "Configured",
+ "disable": "Disable",
+ "dontRequire": "Don't Require",
+ "enable": "Enable",
+ "hide": "Hide",
+ "limit": "Limit",
+ "notConfigured": "Not configured",
+ "require": "Require",
+ "show": "Show",
+ "yes": "Yes"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Endpoint detection and response"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "App and browser isolation",
- "aSRApplicationControl": "Application control",
- "aSRAttackSurfaceReduction": "Attack surface reduction rules",
- "aSRDeviceControl": "Device control",
- "aSRExploitProtection": "Exploit protection",
- "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
- "aVExclusions": "Microsoft Defender Antivirus exclusions",
- "antivirus": "Microsoft Defender Antivirus",
- "cloudPC": "Windows 365 Security Baseline",
- "default": "Endpoint Security",
- "defenderTest": "Microsoft Defender for Endpoint demo",
- "diskEncryption": "BitLocker",
- "eDR": "Endpoint detection and response",
- "edgeSecurityBaseline": "Microsoft Edge baseline",
- "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
- "editionUpgradeConfiguration": "Edition upgrade and mode switch",
- "firewall": "Windows Firewall",
- "firewallRules": "Windows Firewall rules",
- "identityProtection": "Account protection",
- "identityProtectionPreview": "Account protection (preview)",
- "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
- "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
- "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
- "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS firewall",
- "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
- "office365Baseline": "Microsoft Office O365 baseline",
- "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
- "securityBaselines": "Security Baselines",
- "test": "Test Template",
- "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
- "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
- "windowsSecurityExperience": "Windows Security experience"
- },
- "Firewall": {
- "mDE": "Windows Firewall"
- },
- "FirewallRules": {
- "mDE": "Windows Firewall Rules"
- },
- "OneDriveKnownFolderMove": {
- "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Account Protection",
- "administrativeTemplates": "Administrative Templates",
- "androidCompliancePolicy": "Android compliance policy",
- "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
- "applicationControl": "App Control for Business",
- "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
- "bitlocker": "BitLocker",
- "custom": "Custom",
- "deliveryOptimization": "Delivery Optimization",
- "derivedPersonalIdentityVerificationCredential": "Derived credential",
- "deviceControl": "Device Control",
- "deviceFeatures": "Device features",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Device Lock",
- "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
- "deviceRestrictions": "Device restrictions",
- "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
- "domainJoinPreview": "Domain Join",
- "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
- "education": "Education",
- "email": "Email",
- "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
- "endpointProtection": "Endpoint protection",
- "expeditedCheckin": "Mobile device management configuration",
- "exploitProtection": "Exploit Protection",
- "extensions": "Extensions",
- "hardwareConfigurations": "BIOS Configurations and other settings",
- "identityProtection": "Identity protection",
- "iosCompliancePolicy": "iOS compliance policy",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Local user group membership",
- "macCompliancePolicy": "Mac compliance policy",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
- "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
- "microsoftDefenderFirewallRules": "Windows Firewall Rules",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
- "mxProfileZebraOnly": "MX profile (Zebra only)",
- "networkBoundary": "Network boundary",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Override Group Policy",
- "pkcsCertificate": "PKCS certificate",
- "pkcsImportedCertificate": "PKCS imported certificate",
- "preferenceFile": "Preference file",
- "presets": "Presets",
- "scepCertificate": "SCEP certificate",
- "secureAssessmentEducation": "Secure assessment (Education)",
- "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
- "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
- "settingsCatalog": "Settings Catalog",
- "sharedMultiUserDevice": "Shared multi-user device",
- "softwareUpdates": "Software Updates",
- "trustedCertificate": "Trusted certificate",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi import",
- "windows10CompliancePolicy": "Windows 10/11 compliance policy",
- "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
- "windows10XScep": "SCEP certificate - TEST",
- "windows10XTrustedCertificate": "Trusted certificate - TEST",
- "windows10XVPN": "VPN - TEST",
- "windows10XWifi": "WIFI - TEST",
- "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
- "windows365SecurityBaseline": "Windows 365 Security Baseline",
- "windows8CompliancePolicy": "Windows 8 compliance policy",
- "windowsHealthMonitoring": "Windows health monitoring",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
- "windowsUpdateforBusiness": "Windows Update for Business",
- "wiredNetwork": "Wired network",
- "workProfile": "Personally-owned work profile"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Make update available gradually",
- "immediateStart": "Make update available as soon as possible",
- "startDateOnly": "Make update available on a specific date"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Managed devices",
- "devicesWithoutEnrollment": "Managed apps"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filter",
- "assignmentFilterTypeColumnHeader": "Filter mode",
- "assignmentToast": "End user notifications",
- "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
- "autoUpdate": "Auto-update",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
- "groupTableHeader": "Group",
- "installContextLabel": "Install Context",
- "isRemovable": "Install as removable",
- "licenseTypeLabel": "License type",
- "modeTableHeader": "Group mode",
- "policySet": "Policy Set",
- "preventAutoAppUpdate": "Prevent automatic app updates",
- "preventManagedAppBackup": "Prevent iCloud app backup",
- "restartGracePeriodHeader": "Restart grace period",
- "startTimeColumnLabel": "Availability",
- "tracks": "Tracks",
- "uninstallOnRemoval": "Uninstall on device removal",
- "updateMode": "Update Priority",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD web app",
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office Suite",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeAddIn": "Office add-in",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "sharePointApp": "SharePoint app",
- "teamsApp": "Teams app",
- "webApp": "Web link",
- "win32CatalogApp": "Windows catalog app (Win32)",
- "winGetPublicApp": "Windows Package Manager Community Repository",
- "winGetStoreApp": "Microsoft Store app (new)",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "AssignmentToast": {
- "hideAll": "Hide all toast notifications",
- "showAll": "Show all toast notifications",
- "showReboot": "Show toast notifications for computer restarts"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Yes",
- "notConfigured": "No"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "App install may force a device restart",
- "basedOnReturnCode": "Determine behavior based on return codes",
- "force": "Intune will force a mandatory device restart",
- "suppress": "No specific action"
- },
- "FilterType": {
- "exclude": "Exclude",
- "include": "Include",
- "none": "None"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "notApplicable": "Not applicable",
- "required": "Required",
- "uninstall": "Uninstall"
- },
- "SettingType": {
- "assignmentType": "Assignment type",
- "deviceLicensing": "License type",
- "installContext": "Uninstall on device removal",
- "toastSettings": "End user notifications",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Default",
- "postponed": "Postponed",
- "priority": "High Priority"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Configure devices for initial provisioning.",
- "title": "Device preparation"
- },
- "EnrollmentSettings": {
- "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
- "title": "Enrollment settings"
- },
- "OSConfiguration": {
- "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
- "menuTitle": "Windows operating system recovery configuration"
- },
- "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
- "coManagementAuthorityTitle": "Co-management Settings ",
- "deploymentProfiles": "Windows Autopilot deployment profiles",
- "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
- "descriptionLabel": "Windows enrollment methods",
- "enrollmentStatusPage": "Enrollment Status Page"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Automatically approve all recommended driver updates",
- "manual": "Manually approve and deploy driver updates"
- },
- "BulkActions": {
- "button": "Bulk actions"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Approval method:"
- },
- "DeploymentDeferralInDays": {
- "label": "Make updates available after",
- "units": "(days)",
- "value": "{0} days"
- },
- "DriverAction": {
- "header": "Select an action below.",
- "label": "Driver action",
- "placeholder": "Select an action"
- },
- "IncludedDrivers": {
- "label": "Included drivers"
- },
- "SelectDrivers": {
- "header": "Select drivers to include in your bulk action"
- },
- "SelectDriversToInclude": {
- "button": "Select drivers to include"
- },
- "SelectLessDrivers": {
- "validation": "At most one hundred drivers can be selected"
- },
- "SelectMoreDrivers": {
- "validation": "At least one driver should be selected"
- },
- "SelectedDrivers": {
- "label": "Selected drivers"
- },
- "availabilityDate": "Make available in Windows Update",
- "bladeTitle": "Driver updates Windows 10 and later (preview)",
- "lastSync": "Last sync:",
- "lastSyncDefaultText": "Pending initial inventory collection",
- "loadError": "Loading failed!"
- },
- "DriverStatus": {
- "approved": "Approved",
- "declined": "Declined",
- "export": "Exporting recommended drivers",
- "needsReview": "Needs review",
- "paused": "Paused"
- },
- "DriversToReview": {
- "text": "{0} to review"
- },
- "Subtitle": {
- "automatic": "Automatic approval driver update policy",
- "manual": "Manual approval driver update policy"
- },
- "SyncNotification": {
- "failure": "Unable to sync {0}",
- "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
- "pending": "{0} sync in progress",
- "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
- "success": "{0} sync complete",
- "successDescription": "Sync with WUfB service completed at {0}"
- },
- "SyncSpinner": {
- "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
- },
- "TabName": {
- "basics": "Basics",
- "driverUpdateSettings": "Settings",
- "otherDrivers": "Other drivers",
- "properties": "Properties",
- "recommendedDrivers": "Recommended drivers"
- },
- "driverAddFilter": "Add filter",
- "driverApplicableDevices": "Applicable devices",
- "driverApprovalStatus": "Status",
- "driverBulkActions": "Bulk actions",
- "driverClass": "Driver class",
- "driverCount": "Showing {0} to {1} of {2} records",
- "driverFilterNoneSelected": "None selected",
- "driverManufacturer": "Manufacturer",
- "driverName": "Driver name",
- "driverNameLower": "windows driver update deployment",
- "driverNameUpper": "Windows driver update deployment",
- "driverRefresh": "Refresh",
- "driverReleaseDate": "Release date",
- "driverSearch": "Search",
- "driverSearchKeyword": "Enter search keyword",
- "driverVersion": "Version",
- "firstDeploymentDate": "First Deployment",
- "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
- "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
- "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
- "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
- "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
- "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
- "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
- "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
- "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
- "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
- "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
- "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
- "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
- "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
- "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
- "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
- "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
- "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
- "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
- "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
- "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
- },
- "Inputs": {
- "accountDomain": "Account domain",
- "accountDomainHint": "e.g. contosodomain",
- "accountDomainInfoBalloon": "Specify the user’s account domain.",
- "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
- "allowContactSetting": "Allow user to change contact setting",
- "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
- "allowUserChange": "Allow user to change setting",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
- "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "App install context",
- "appUrlLabel": "Appstore URL",
- "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Applicable device type",
- "assignmentActionLabel": "Mode",
- "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
- "authenticationMetod": "Authentication method",
- "authenticationType": "Authentication type",
- "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
- "availableLicenseCount": "Available licenses",
- "basicAuth": "Basic authentication",
- "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
- "bookNameLabel": "Book name",
- "bundleDescriptionHint": "Enter a description that describes the apps included.",
- "calendar": "Calendar",
- "categoryLabel": "Category",
- "categoryNameLabel": "Default name",
- "certProfileType": "Certificate profile type",
- "certificate": "Certificate",
- "certificates": "Certificates",
- "commandLineLabel": "Command-line arguments",
- "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
- "configurationSettingsFormatLabel": "Configuration settings format",
- "configurationSettingsLabel": "Settings format",
- "contactSync": "Save Contacts",
- "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
- "contacts": "Contacts",
- "createdDateTime": "Created",
- "defaultCategoryHint": "Default categories cannot be changed",
- "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
- "descriptionGenericLabel": "Description",
- "descriptionHint": "Enter a description...",
- "descriptionLabel": "Description",
- "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
- "developerLabel": "Developer",
- "developerSizeHint": "The maximum length of the developer name is 256 characters.",
- "disable": "Disable",
- "disabled": "Disabled",
- "displayNameLabel": "Name",
- "displayVersionHint": "Enter the app version",
- "displayVersionLabel": "App Version",
- "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
- "eBookCategoryNameLabel": "Default name",
- "emailAccount": "Email account name",
- "emailAccountHint": "e.g. Corporate Email",
- "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
- "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
- "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
- "emailServer": "Email Server",
- "emailServerHint": "e.g. mail.contoso.com",
- "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
- "enable": "Enable",
- "enableSMime": "Enable S/MIME",
- "enabled": "Enabled",
- "encryptAllEmails": "Encrypt all emails",
- "encryptionCertificates": "Encryption certificates",
- "endUserNotifications": "End-user notifications",
- "enrollmentTypeLabel": "Device enrollment type",
- "externalRecipients": "External recipients MailTip",
- "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
- "focusedInbox": "Focused Inbox",
- "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
- "fullScreenEnabledLabel": "Full screen",
- "gmailNineAmountOfEmail": "Amount of email to synchronize",
- "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
- "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
- "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
- "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
- "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
- "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
- "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
- "ignoreManifestScope": "Ignore manifest scope",
- "ignoreVersionDetection": "Ignore app version",
- "informationUrlLabel": "Information URL",
- "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
- "installAsManaged": "Install as managed",
- "installationSourceLabel": "App type",
- "installerTypeInfoBalloon": "The installer type of the application package.",
- "installerTypeLabel": "Installer Type",
- "isFeatured": "Show this as a featured app in the Company Portal",
- "isMAMEnabledToggleLabel": "Yes",
- "lastModifiedDateTime": "Last updated Time",
- "ldapUrl": "LDAP URL",
- "licensingType": "Supports device context assignment",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimum operating system",
- "modernAuth": "Modern authentication",
- "nameHint": "Enter a name",
- "nameLabel": "Name",
- "nameSizeHint": "The maximum length of the name is 512 characters.",
- "notConfigured": "Not configured",
- "notesLabel": "Notes",
- "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
- "notificationType": "Notification type",
- "oneDay": "One Day",
- "oneMonth": "One Month",
- "oneWeek": "One Week",
- "outlookSMimeSettings": "Outlook S/MIME settings",
- "ownerLabel": "Owner",
- "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
- "packageIdLabel": "Package Identifier",
- "packageNameLabel": "Package name",
- "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
- "platformLabel": "Platform",
- "policyDescriptionLabel": "Description",
- "policyNameLabel": "Name",
- "preComposedIconEnabled": "Precomposed",
- "primarySMTPAddress": "Primary SMTP Address",
- "privacyUrlLabel": "Privacy URL",
- "publisherHint": "Enter a publisher name",
- "publisherLabel": "Publisher",
- "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
- "require": "Require",
- "requireBiometrics": "Require Biometrics to access app",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "At least one scope tag is required",
- "searchAppLabel": "Select app",
- "searchAppLinkText": "Search the App Store",
- "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
- "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
- "selectAAD": "Select a Microsoft Entra attribute",
- "selectAppFileLabel": "Select file",
- "selectAppFileLinkText": "Select app package file",
- "selectAppFileToUpdateLabel": "Select file to update",
- "selectAuthMethod": "Select an authentication method",
- "selectAuthType": "Select an authentication type",
- "selectCatalogAppLabel": "Select app",
- "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
- "selectCertificate": "Select a certificate",
- "signAllEmails": "Sign all emails",
- "signingCertificates": "Signing certificates",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Suite Description",
- "suiteNameLabel": "Suite Name",
- "targetApplicationBundleIdentifier": "Target application bundle identifier",
- "targetedPlatformsLabel": "Targeted platform",
- "tasks": "Tasks",
- "threeDays": "Three Days",
- "totalLicenseCount": "Total licenses",
- "twoWeeks": "Two Weeks",
- "unifiedAssignmentsLabel": "Assign to:",
- "unlimited": "Unlimited",
- "urlHint": "Enter a valid url",
- "useManagedBrowserHint": "Android and iOS only. Learn more",
- "useManagedBrowserLabel": "Require a managed browser to open this link",
- "userPrinicipalName": "User Principal Name",
- "username": "Username",
- "usernameAttribute": "Username attribute from Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
- "usernamePassword": "Username and password",
- "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
- "webAppUrlLabel": "App URL",
- "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
- "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "XML Data Entered",
- "xmlFormatInvalid": "XML policy format is invalid.",
- "xmlTooLarge": "Input size must be less than 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Failed to delete {0}",
- "failureCa": "Failed to delete {0} because it is referenced by CA policies",
- "modifying": "Deleting {0}",
- "success": "Successfully deleted {0}"
- },
- "Notify": {
- "failure": "Failed to update {0}",
- "modifying": "Modifying {0}",
- "success": "Successfully updated {0}"
- },
- "menuLabel": "Authentication context"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
- "certificate": "Certificate authentication",
- "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
- "multifactor": "Multifactor authentication",
- "require": "Require federated authentication method (Preview)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
- },
- "Option": {
- "always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
- "label": "Persistent browser session",
- "never": "Never persistent"
- },
- "Warning": {
- "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Hours or days",
- "value": "Frequency"
- },
- "Option": {
- "Day": {
- "plural": "{0} days",
- "singular": "1 day"
- },
- "Hour": {
- "plural": "{0} hours",
- "singular": "1 hour"
- },
- "daysOption": "Days",
- "everytime": "Every time",
- "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
- "hoursOption": "Hours",
- "label": "Sign-in frequency",
- "placeholder": "Select units"
- }
- },
- "mainOption": "Modify session lifetime",
- "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
- },
- "SingleSelectorActive": {
- "failed": "Unable to load this data.",
- "reattempt": "Loading data. Reattempt {0} of {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Choose directory roles"
- },
- "Excluded": {
- "gridAria": "List of excluded users"
- },
- "Included": {
- "gridAria": "List of included users"
- },
- "Validation": {
- "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
- "customRoleSelected": "At least one custom role is selected",
- "failed": "\"{0}\" must be configured",
- "roles": "Select at least one role",
- "usersGroups": "Select at least one user or group"
- },
- "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
- },
- "advancedTabText": "Advanced",
- "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
- "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
- "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
- "allDayCheckboxLabel": "All day",
- "allDevicePlatforms": "Any device",
- "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
- "allGuestUserLabel": "All guest and external users",
- "allRiskLevelsOption": "All risk levels",
- "allTrustedLocationLabel": "All trusted locations",
- "allUserGroupSetSelectorLabel": "All users and groups selected",
- "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
- "allUsersString": "All users",
- "and": "{0} AND {1} ",
- "andWithGrouping": "({0}) AND {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Any cloud app",
- "appContextOptionInfoContent": "Requested authentication tag",
- "appContextOptionLabel": "Requested authentication tag (Preview)",
- "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
- "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
- "appNotSetSeletorLabel": "0 cloud apps selected",
- "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
- "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
- "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
- "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
- "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
- "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
- "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
- "applyConditonLabel": "Configure",
- "ariaLabelPolicyDisabled": "Policy is disabled",
- "ariaLabelPolicyEnabled": "Policy is enabled",
- "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
- "blockAccess": "Block access",
- "builtInDirectoryRoleLabel": "Built-in directory roles",
- "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "casInfoBubble": "This control works for various cloud apps.",
- "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "cert64DownloadCol": "Download base64 certificate",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Download certificate",
- "certDurationCol": "Expiry",
- "certDurationStartCol": "Valid from",
- "certName": "VpnCert",
- "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Choose Applications",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Chosen Applications",
- "chooseApplicationsEmpty": "No Applications",
- "chooseApplicationsNone": "None",
- "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseApplicationsPlural": "{0} and {1} more",
- "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
- "chooseApplicationsRemove": "Remove",
- "chooseApplicationsReturnedPlural": "{0} applications found",
- "chooseApplicationsReturnedSingular": "1 application found",
- "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
- "chooseApplicationsSearchHint": "Search Applications...",
- "chooseApplicationsSearchLabel": "Applications",
- "chooseApplicationsSearching": "Searching...",
- "chooseApplicationsSelect": "Select",
- "chooseApplicationsSelected": "Selected",
- "chooseApplicationsSingular": "{0} and 1 more",
- "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
- "chooseLocationCorpnetItem": "Corporate network",
- "chooseLocationSelectedLocationsLabel": "Selected locations",
- "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Choose Locations",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Chosen Locations",
- "chooseLocationsEmpty": "No Locations",
- "chooseLocationsExcludedSelectorTitle": "Select",
- "chooseLocationsIncludedSelectorTitle": "Select",
- "chooseLocationsNone": "None",
- "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseLocationsPlural": "{0} and {1} more",
- "chooseLocationsRemove": "Remove",
- "chooseLocationsReturnedPlural": "{0} locations found",
- "chooseLocationsReturnedSingular": "1 location found",
- "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
- "chooseLocationsSearchHint": "Search Locations...",
- "chooseLocationsSearchLabel": "Locations",
- "chooseLocationsSearching": "Searching...",
- "chooseLocationsSelect": "Select",
- "chooseLocationsSelected": "Selected",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
- "chooseLocationsSingular": "{0} and 1 more",
- "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
- "claimProviderAddCommandText": "New custom control",
- "claimProviderAddNewBladeTitle": "New custom control",
- "claimProviderDeleteCommand": "Delete",
- "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "claimProviderDeleteTitle": "Are you sure?",
- "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
- "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
- "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
- "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
- "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
- "claimProviderNotificationCreateTitle": "Creating '{0}'",
- "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
- "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
- "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
- "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
- "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
- "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
- "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
- "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
- "claimProviderNotificationUpdateTitle": "Updating '{0}'",
- "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
- "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
- "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
- "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
- "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
- "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
- "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
- "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
- "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
- "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
- "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
- "claimProvidersNone": "No custom controls",
- "claimProvidersSearchPlaceholder": "Search controls.",
- "classicPoilcyFilterTitle": "Show",
- "classicPolicyAllPlatforms": "All Platforms",
- "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
- "classicPolicyCloudAppTitle": "Cloud application",
- "classicPolicyControlAllow": "Allow",
- "classicPolicyControlBlock": "Block",
- "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
- "classicPolicyControlRequireCompliantDevice": "Require compliant device",
- "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
- "classicPolicyControlRequireMfa": "Require multifactor authentication",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
- "classicPolicyDeleteCommand": "Delete",
- "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
- "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
- "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
- "classicPolicyDetailBladeTitle": "Details",
- "classicPolicyDisableCommand": "Disable",
- "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
- "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
- "classicPolicyDisableFailTitle": "Failed to disable classic policy",
- "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
- "classicPolicyDisableInProgressTitle": "Disabling classic policy",
- "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
- "classicPolicyDisableSuccessTitle": "Classic policy disabled",
- "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
- "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
- "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
- "classicPolicyFilterAll": "All policies",
- "classicPolicyFilterDisabled": "Disabled policies",
- "classicPolicyFilterEnabled": "Enabled policies",
- "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
- "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
- "classicPolicyIncludedPlatformsTitle": "Included device platforms",
- "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
- "classicPolicyMigrateCommand": "Migrate",
- "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
- "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
- "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
- "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
- "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
- "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
- "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
- "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
- "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
- "classicPolicySaveFailDescription": "Failed to save '{0}'",
- "classicPolicySaveFailTitle": "Failed to save classic policy",
- "classicPolicySaveInProgressDescription": "Saving '{0}'",
- "classicPolicySaveInProgressTitle": "Saving classic policy",
- "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
- "classicPolicySaveSuccessTitle": "Classic policy saved",
- "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
- "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
- "clientAppBladeTitle": "Client apps",
- "clientAppDescription": "Select the client apps this policy will apply to",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
- "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
- "clientAppLegacyHeader": "Legacy authentication clients",
- "clientAppMobileDesktop": "Mobile apps and desktop clients",
- "clientAppModernHeader": "Modern authentication clients",
- "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
- "clientAppSelectSpecificClientApps": "Select client apps",
- "clientAppWebBrowser": "Browser",
- "clientAppsSelectedLabel": "{0} included",
- "clientTypeBrowser": "Browser",
- "clientTypeEas": "Exchange ActiveSync clients",
- "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
- "clientTypeModernAuth": "Modern authentication clients",
- "clientTypeOtherClients": "Other clients",
- "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
- "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
- "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
- "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
- "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
- "cloudappsSelectorPluralExcluded": "{0} apps excluded",
- "cloudappsSelectorPluralIncluded": "{0} apps included",
- "cloudappsSelectorSingularExcluded": "1 app excluded",
- "cloudappsSelectorSingularIncluded": "1 app included",
- "cloudappsSelectorUserPlural": "{0} apps",
- "cloudappsSelectorUserSingular": "1 app",
- "conditionLabelMulti": "{0} conditions selected",
- "conditionLabelOne": "1 condition selected",
- "conditionalAccessBladeTitle": "Conditional Access",
- "conditionsNotSelectedLabel": "Not configured",
- "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
- "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
- "configureCasText": "Configure Cloud App Security",
- "configureCustomControlsText": "Configure custom policy",
- "controlLabelMulti": "{0} controls selected",
- "controlLabelOne": "1 control selected",
- "controlValidatorText": "Please select at least one control",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
- "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
- "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
- "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
- "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
- "controlsMamInfoBubble": "Device must use these approved client applications.",
- "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
- "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
- "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
- "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
- "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
- "createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
- "customRoleLabel": "Custom roles (not supported)",
- "dateRangeTypeLabel": "Date range",
- "daysOfWeekPlaceholderText": "Filter days of the week",
- "daysOfWeekTypeLabel": "Days of the week",
- "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
- "descriptionContentForControlsAndOr": "For multiple controls",
- "devicePlatform": "Device platform",
- "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} included",
- "devicePlatformIncludeExclude": "{0} and {1} excluded",
- "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
- "devicePlatformsNone": "None",
- "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
- "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
- "deviceStateAll": "All device state",
- "deviceStateCompliant": "Device marked as compliant",
- "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
- "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
- "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
- "deviceStateConditionSelectorLabel": "Device state (deprecated)",
- "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
- "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
- "deviceStateDomainJoinedInfoLinkText": "Learn more.",
- "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
- "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
- "directoryRolesLabel": "Directory roles",
- "discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
- "duplicatePolicyName": "{0} COPY",
- "endDatePickerLabel": "Ends",
- "endTimePickerLabel": "End time",
- "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
- "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
- "enterUserText": "No user is selected. Select a user.",
- "evaluationResult": "Evaluation result",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
- "excludeAllTrustedLocationSelectorText": "all trusted locations",
- "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
- "friday": "Friday",
- "grantControls": "Grant controls",
- "gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
- "gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
- "gridPolicyName": "Policy Name",
- "gridPolicyState": "State",
- "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
- "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
- "groupSelectionBladeSelect": "Select groups",
- "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
- "groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
- "highRisk": "High",
- "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
- "includeAppsTextFormat": "Include: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
- "includeUnknownAreasCheckboxLabel": "Include unknown areas",
- "infoCommandLabel": "Info",
- "invalidCertDuration": "Invalid cert duration",
- "invalidIpAddress": "Value must be a valid IP address",
- "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
- "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Load all",
- "loading": "Loading...",
- "locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
- "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
- "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
- "locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
- "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
- "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
- "locationsSelectedPrivateLinksLabel": "Selected Private Links",
- "lowRisk": "Low",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
- "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
- "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
- "markAsTrustedCheckboxLabel": "Mark as trusted location",
- "mediumRisk": "Medium",
- "memberSelectionCommandRemove": "Remove",
- "menuItemClaimProviderControls": "Custom controls (Preview)",
- "menuItemClassicPolicies": "Classic policies",
- "menuItemInsightsAndReporting": "Insights and reporting",
- "menuItemManage": "Manage",
- "menuItemNamedLocationsPreview": "Named locations (Preview)",
- "menuItemNamedNetworks": "Named locations",
- "menuItemPolicies": "Policies",
- "menuItemTermsOfUse": "Terms of use",
- "modifiedTimeLabel": "Modified time",
- "monday": "Monday",
- "nameLabel": "Name",
- "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
- "namedLocationTypeCountry": "Countries/Regions",
- "namedLocationTypeLabel": "Define the location using:",
- "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
- "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "You need to select at least one country/region",
- "namedNetworkDeleteCommand": "Delete",
- "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
- "namedNetworkInvalidRange": "Value must be a valid IP range.",
- "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
- "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
- "namedNetworkIpRangesTab": "IP ranges",
- "namedNetworkListAdd": "New location",
- "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
- "namedNetworkNameDescription": "Example: 'Redmond office'",
- "namedNetworkNameInvalid": "The supplied name is invalid.",
- "namedNetworkNameRequired": "You must supply a name for this location.",
- "namedNetworkNoIpRanges": "No IP ranges",
- "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
- "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
- "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
- "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
- "namedNetworkNotificationCreateTitle": "Creating '{0}'",
- "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
- "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
- "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
- "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
- "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
- "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
- "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
- "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
- "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
- "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
- "namedNetworkSearchPlaceholder": "Search locations.",
- "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
- "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
- "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
- "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
- "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
- "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
- "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
- "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
- "namedNetworksAdd": "New named location",
- "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} and {1} excluded",
- "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} included",
- "namedNetworksNone": "No named locations found.",
- "namedNetworksTitle": "Configure locations",
- "namednetworkExceedingSizeErrorBladeTitle": "Error details",
- "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
- "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
- "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
- "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
- "newCertName": "new cert",
- "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
- "noPolicyRowMessage": "No policies",
- "noSPSelected": "No service principal selected",
- "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
- "noUserSelected": "No user selected",
- "noneRisk": "No risk",
- "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
- "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
- "oneUserSelected": "1 user selected",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
- "or": "{0} OR {1} ",
- "pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
- "policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
- "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
- "policyAssignmentsSection": "Assignments",
- "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
- "policyCloudAppsDisplayTextAllApp": "All apps",
- "policyCloudAppsLabel": "Cloud apps",
- "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionDevicePlatform": "Device platforms",
- "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
- "policyConditionLocation": "Locations",
- "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
- "policyConditionLocationPreview": "Locations (Preview)",
- "policyConditionSigninRisk": "Sign-in risk",
- "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
- "policyConditionUserRisk": "User risk",
- "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
- "policyConditioniClientApp": "Client apps",
- "policyControlAllowAccessDisplayedName": "Grant access",
- "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
- "policyControlBladeTitle": "Grant",
- "policyControlBlockAccessDisplayedName": "Block access",
- "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
- "policyControlContentDescription": "Control access enforcement to block or grant access.",
- "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
- "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
- "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
- "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
- "policyControlRequireMamDisplayedName": "Require approved client app",
- "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
- "policyControlSelectAuthStrength": "Require authentication strength",
- "policyControlsNoControlsSelected": "0 controls selected",
- "policyControlsSection": "Access controls",
- "policyCreatBladeTitle": "New",
- "policyCreateButton": "Create",
- "policyCreateFailedMessage": "Error: {0}",
- "policyCreateFailedTitle": "Failed to create '{0}'",
- "policyCreateInProgressTitle": "Creating '{0}'",
- "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyCreateSuccessTitle": "Successfully created '{0}'",
- "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "policyDeleteFailTitle": "Failed to delete '{0}'",
- "policyDeleteInProgressTitle": "Deleting '{0}'",
- "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
- "policyEnforceLabel": "Enable policy",
- "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
- "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
- "policyErrorUnknown": "Something went wrong, please try again later.",
- "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
- "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
- "policyNameCannotBeEmpty": "Policy name can't be empty",
- "policyNameDevice": "Device policy",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Mobile App Management policy",
- "policyNameMfaLocation": "Multifactor authentication and location policy",
- "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
- "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
- "policyOff": "Off",
- "policyOn": "On",
- "policyReportOnly": "Report-only",
- "policyReviewSection": "Review",
- "policySaveButton": "Save",
- "policyStatusIconDescription": "Policy is Enabled",
- "policyStatusIconEnabled": "Enabled status icon",
- "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
- "policyTemplateName2": "Allow {0} access only on managed devices",
- "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
- "policyTriggerRiskSpecific": "Select specific risk level",
- "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
- "policyTriggersNoConditionsSelected": "0 conditions selected",
- "policyTriggersSelectorLabel": "Conditions",
- "policyUpdateFailedMessage": "Error: {0}",
- "policyUpdateFailedTitle": "Failed to update {0}",
- "policyUpdateInProgressTitle": "Updating {0}",
- "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyUpdateSuccessTitle": "Successfully updated {0}",
- "primaryCol": "Primary",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
- "requireAllControlsText": "Require all the selected controls",
- "requireCompliantDevice": "Require compliant device",
- "requireDomainJoined": "Require domain-joined device",
- "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
- "requireMFA": "Require multifactor authentication",
- "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
- "requireOneControlText": "Require one of the selected controls",
- "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
- "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
- "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
- "resetFilters": "Reset filters",
- "sPRequired": "Service principal required",
- "sPSelectorInfoBalloon": "User or Service Principal you want to test",
- "saturday": "Saturday",
- "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
- "securityDefaultsPolicyName": "Security defaults",
- "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
- "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
- "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
- "selectDevicePlatforms": "Select device platforms",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Select locations",
- "selectedSP": "Selected Service Principal",
- "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
- "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
- "servicePrincipalDataGridAria": "List of available service principals",
- "servicePrincipalDropDownLabel": "What does this policy apply to?",
- "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
- "servicePrincipalSelectionsAria": "Selected service principals grid",
- "servicePrincipalSelectorAria": "List of chosen service principals",
- "servicePrincipalSelectorMultiple": "{0} service principals selected",
- "servicePrincipalSelectorSingle": "1 service principal selected",
- "servicePrincipalSpecificExc": "Specific service principals excluded",
- "servicePrincipalSpecificInc": "Specific service principals included",
- "servicePrincipals": "Service principals",
- "sessionControlBladeTitle": "Session",
- "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
- "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
- "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
- "sessionControls": "Session controls",
- "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
- "sessionControlsCasLabel": "Use Conditional Access App Control",
- "sessionControlsSecureSignInLabel": "Require token binding",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} included",
- "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
- "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
- "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
- "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
- "specificUsersExcluded": "specific users excluded",
- "specificUsersIncluded": "Specific users included",
- "specificUsersIncludedAndExcluded": "Specific users excluded and included",
- "startDatePickerLabel": "Starts",
- "startFreeTrial": "Start a free trial",
- "startTimePickerLabel": "Start time",
- "sunday": "Sunday",
- "testButton": "What If",
- "thumbprintCol": "Thumbprint",
- "thursday": "Thursday",
- "timeConditionAllTimesLabel": "Any time",
- "timeConditionIntroText": "Configure the time this policy will apply to",
- "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
- "timeConditionSelectorLabel": "Time (Preview)",
- "timeConditionSpecificLabel": "Specific times",
- "timeSelectorAllTimesText": "Any time",
- "timeSelectorSpecificTimesText": "Specific times configured",
- "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
- "timeZoneDropdownLabel": "Time zone",
- "timeZoneDropdownPlaceholderText": "Select a time zone",
- "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
- "tooManyPoliciesTitle": "More than 50 policies found",
- "trustedLocationStatusIconDescription": "Location is trusted",
- "trustedLocationStatusIconEnabled": "Trusted status icon",
- "tuesday": "Tuesday",
- "uploadInBadState": "Unable to upload the specified file.",
- "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
- "upsellAppsTitle": "Secure applications",
- "upsellBannerText": "Get a free Premium trial to use this feature",
- "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
- "upsellDataTitle": "Secure data",
- "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
- "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
- "upsellRiskTitle": "Protect against risk",
- "upsellTitle": "Conditional Access",
- "upsellWhyTitle": "Why use Conditional Access?",
- "userAppNoneOption": "None",
- "userNamePlaceholderText": "Enter User Name",
- "userNotSetSeletorLabel": "0 users and groups selected",
- "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
- "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
- "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
- "userOrSPSelectionBladeTitle": "Users or workload identities",
- "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
- "userRequired": "User Required",
- "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
- "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
- "userSPRequired": "User or Service principal required",
- "userSPSelectorTitle": "User or Workload identity",
- "userSelectionBladeAllUsersAndGroups": "All users and groups",
- "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
- "userSelectionBladeExcludeTabTitle": "Exclude",
- "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
- "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
- "userSelectionBladeIncludeTabTitle": "Include",
- "userSelectionBladeIncludedSelectorTitle": "Select",
- "userSelectionBladeSelectUsers": "Select users",
- "userSelectionBladeSelectedUsers": "Select users and groups",
- "userSelectionBladeTitle": "Users and groups",
- "userSelectorBladeTitle": "Users",
- "userSelectorExcluded": "{0} excluded",
- "userSelectorGroupPlural": "{0} groups",
- "userSelectorGroupSingular": "1 group",
- "userSelectorIncluded": "{0} included",
- "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
- "userSelectorSelected": "{0} selected",
- "userSelectorTitle": "User",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} users",
- "userSelectorUserSingular": "1 user",
- "userSelectorWithExclusion": "{0} and {1}",
- "usersGroupsLabel": "Users and groups",
- "viewApprovedAppsText": "See list of approved client apps",
- "viewCompliantAppsText": "See list of policy protected client apps",
- "viewPolicyInformation": "View policy information",
- "vpnBladeTitle": "VPN connectivity",
- "vpnCertCreateFailedMessage": "Error: {0}",
- "vpnCertCreateFailedTitle": "Failed to create {0}",
- "vpnCertCreateInProgressTitle": "Creating {0}",
- "vpnCertCreateSuccessMessage": "Successfully created {0}.",
- "vpnCertCreateSuccessTitle": "Successfully created {0}",
- "vpnCertNoRowsMessage": "No VPN certificates found",
- "vpnCertUpdateFailedMessage": "Error: {0}",
- "vpnCertUpdateFailedTitle": "Failed to update {0}",
- "vpnCertUpdateInProgressTitle": "Updating {0}",
- "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
- "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
- "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
- "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
- "vpnMenuText": "VPN connectivity",
- "vpncertDropdownDefaultOption": "Duration",
- "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
- "vpncertDropdownLabel": "Select duration",
- "vpncertDropdownOneyearOption": "1 year",
- "vpncertDropdownThreeyearOption": "3 years",
- "vpncertDropdownTwoyearOption": "2 years",
- "wednesday": "Wednesday",
- "whatIfCountry": "Country/Region",
- "whatIfCountryInfo": "The country/region the user is signing in from.",
- "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
- "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
- "whatIfIpAddress": "IP address",
- "whatIfIpAddressInfo": "IP address the user is signing in from.",
- "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
- "whatIfSelectCountry": "Select country/region...",
- "whatIfSelectDevicePlatform": "Select device platform...",
- "whatIfSelectPrivateLink": "Select private link...",
- "whatIfSelectSignInRisk": "Select sign-in risk...",
- "whatIfSignInRisk": "Sign-in risk",
- "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
- "whatIfUnknownAreas": "Unknown Areas",
- "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Workload identities (preview)",
- "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
- "workloadIdentity": "Workload identity"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Not supported",
- "supportEnding": "Support ending",
- "supported": "Supported"
- }
- },
- "SecurityTemplate": {
- "aSR": "Attack surface reduction",
- "accountProtection": "Account protection",
- "allDevices": "All devices",
- "antivirus": "Antivirus",
- "antivirusReporting": "Antivirus Reporting (Preview)",
- "conditionalAccess": "Conditional access",
- "deviceCompliance": "Device compliance",
- "diskEncryption": "Disk encryption",
- "eDR": "Endpoint detection and response",
- "ePM": "Endpoint Privilege Management",
- "firewall": "Firewall",
- "helpSupport": "Help and support",
- "setup": "Setup",
- "wdapt": "Microsoft Defender for Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Failed",
- "hardReboot": "Hard reboot",
- "retry": "Retry",
- "softReboot": "Soft reboot",
- "success": "Success"
- },
- "Columns": {
- "codeType": "Code type",
- "returnCode": "Return code"
- },
- "bladeTitle": "Return codes",
- "gridAriaLabel": "Return codes",
- "header": "Specify return codes to indicate post-installation behavior:",
- "onAddAnnounceMessage": "Return code added item {0} of {1}",
- "onDeleteSuccess": "Return code {0} deleted successfully",
- "returnCodeAlreadyUsedValidation": "Return code is already used.",
- "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
- "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
- "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
- "selectorLabel": "Return codes"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabic",
- "bulgarian": "Bulgarian",
- "chineseSimplified": "Chinese (Simplified)",
- "chineseTraditional": "Chinese (Traditional)",
- "croatian": "Croatian",
- "czech": "Czech",
- "danish": "Danish",
- "dutch": "Dutch",
- "englishUK": "English (United Kingdom)",
- "englishUS": "English (United States)",
- "estonian": "Estonian",
- "finnish": "Finnish",
- "frenchCanada": "French (Canada)",
- "frenchFrance": "French (France)",
- "german": "German",
- "greek": "Greek",
- "hebrew": "Hebrew",
- "hungarian": "Hungarian",
- "italian": "Italian",
- "japanese": "Japanese",
- "korean": "Korean",
- "latvian": "Latvian",
- "lithuanian": "Lithuanian",
- "norwegian": "Norwegian, Bokmål",
- "polish": "Polish",
- "portugueseBrazil": "Portuguese (Brazil)",
- "portuguesePortugal": "Portuguese (Portugal)",
- "romanian": "Romanian",
- "russian": "Russian",
- "serbian": "Serbian",
- "slovak": "Slovak",
- "slovenian": "Slovenian",
- "spanishMexico": "Spanish (Mexico)",
- "spanishSpain": "Spanish (Spain)",
- "swedish": "Swedish",
- "thai": "Thailand",
- "turkish": "Turkish",
- "ukrainian": "Ukrainian"
- },
- "Summary": {
- "placeholder": "Select a notification message from the left to preview contents."
- },
- "companyContact": "Show contact information",
- "companyLogo": "Show company logo",
- "companyName": "Show company name",
- "createEditDescription": "Create or edit notification message templates.",
- "createMessage": "Create message",
- "deviceDetails": "Show device details",
- "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
- "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
- "editMessage": "Edit message",
- "email": "email",
- "emailFooterTitle": "Email Footer",
- "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
- "emailHeaderTitle": "Email Header",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Configure Customization settings",
- "formSubTitle": "Create or modify notification emails",
- "headerFooterSettingsTab": "Header and footer settings",
- "imgPreview": "Image Preview",
- "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
- "iwLink": "Show company portal website link",
- "listEmpty": "No message templates.",
- "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "listSubTitle": "List of notification message templates",
- "listTitle": "Notification message templates",
- "localizedNotificationMessageTemplates": "Localized notification message templates",
- "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
- "messageCapitalized": "Notification message template",
- "messageLowercase": "notification message template",
- "missingDefaultError": "Select a default template",
- "notificationMessageTemplates": "Notification message templates",
- "rowValidationError": "At least one message template is required",
- "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "tenantValueText": "Tenant Value",
- "testEmailLabel": "Send preview email",
- "localeLabel": "Locale",
- "isDefaultLocale": "Is Default"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Number of days to wait before restart is enforced"
- },
"Description": {
"label": "Description"
},
+ "FeatureDeploymentSettings": {
+ "header": "Feature deployment settings"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "This feature cannot downgrade a device.",
+ "label": "Feature update to deploy"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Final group availability"
+ },
+ "GradualRolloutInterval": {
+ "label": "Days between groups"
+ },
+ "GradualRolloutStartDate": {
+ "label": "First group availability"
+ },
"Name": {
"label": "Name"
},
- "QualityUpdateRelease": {
- "label": "Expedite installation of quality updates if device OS version less than:"
- },
- "bladeTitle": "Quality updates Windows 10 and later (preview)",
- "loadError": "Loading failed!"
+ "OptionalUpdate": {
+ "label": "Required or optional update"
+ },
+ "RolloutOptions": {
+ "label": "Rollout options"
+ },
+ "RolloutSettings": {
+ "header": "When would you like to make the update available in Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Configure scope tags for this policy."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "First available date"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Disabled",
+ "enabled": "Enabled",
+ "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
+ "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
+ "notApplicable": "Not Applicable",
+ "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
+ },
+ "bladeTitle": "Feature update deployments",
+ "deploymentSettingsTitle": "Deployment settings",
+ "loadError": "Loading failed!",
+ "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\" has been saved.",
+ "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
+ },
"TabName": {
- "qualityUpdateSettings": "Settings"
+ "deploymentSettings": "Deployment settings",
+ "groupAssignmentSettings": "Assignments",
+ "scopeSettings": "Scope tags"
},
- "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
- "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
- "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
- "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
+ "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
+ "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
+ "profileNameWarning": "Name should be less than 64 characters",
+ "specificLicensingRequired": "Some selected capabilities require specific licensing."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64-bit",
- "thirtyTwoBit": "32-bit"
- },
- "TACSettings": {
- "edgeSettings": "Edge configuration settings",
- "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
- "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
- "generalAppConfig": "General app configuration",
- "generalSettings": "General configuration settings",
- "outlookSMIMEConfig": "Outlook S/MIME settings",
- "outlookSettings": "Outlook configuration settings",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Add network boundary",
- "addNetworkBoundaryButton": "Add network boundary...",
- "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
- "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
- "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
- "boundaryType": "Boundary type",
- "cloudResources": "Cloud resources",
- "corporateIdentity": "Corporate identity",
- "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
- "editNetworkBoundary": "Edit network boundary",
- "enrollmentState": "Enrollment state",
- "iPv4Ranges": "IPv4 ranges",
- "iPv6Ranges": "IPv6 ranges",
- "internalProxyServers": "Internal proxy servers",
- "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
- "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
- "mdmDiscoveryUrl": "MDM discovery URL",
- "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
- "minimumPinLength": "Set the minimum number of characters required for the PIN",
- "name": "Name",
- "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
- "networkBoundary": "Network boundary",
- "networkDomainNames": "Network domains",
- "neutralResources": "Neutral resources",
- "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
- "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
- "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
- "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
- "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
- "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
- "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
- "protectedDomainNames": "Protected domains",
- "proxyServers": "Proxy servers",
- "requireAppPin": "Disable app PIN when device PIN is managed",
- "requiredSettings": "Required settings",
- "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
- "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
- "revokeOnUnenroll": "Revoke encryption keys on unenroll",
- "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
- "showWipIcon": "Show the enterprise data protection icon",
- "type": "Type",
- "useRmsForWip": "Use Azure RMS for WIP",
- "value": "Value",
- "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
- "wipProtectionMode": "Windows Information Protection mode",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
+ "Platform": {
+ "all": "All",
+ "android": "Android device administrator",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android enterprise",
+ "common": "Common",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS and Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "windows": "Windows",
+ "windows10": "Windows 10 and later",
+ "windows10CM": "Windows 10 and later (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 and later",
+ "windows8And10": "Windows 8 and 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 and later",
+ "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows PC"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filter",
+ "noFilters": "None"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Author",
- "template": "Template name"
- },
- "Row": {
- "ariaLabel": "row {0} of {1} column {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
- },
- "SettingsCatalog": {
- "subtitle": "Start from scratch and select settings you want from the library of available settings",
- "title": "Settings catalog"
- },
- "Templates": {
- "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
- "title": "Templates"
- },
- "noData": "No policy templates found"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop Client",
- "visioProRetail": "Visio Online Plan 2"
- },
- "Countries": {
- "ae": "United Arab Emirates",
- "ag": "Antigua and Barbuda",
- "ai": "Anguilla",
- "al": "Albania",
- "am": "Armenia",
- "ao": "Angola",
- "ar": "Argentina",
- "at": "Austria",
- "au": "Australia",
- "az": "Azerbaijan",
- "bb": "Barbados",
- "be": "Belgium",
- "bf": "Burkina Faso",
- "bg": "Bulgaria",
- "bh": "Bahrain",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolivia",
- "br": "Brazil",
- "bs": "Bahamas",
- "bt": "Bhutan",
- "bw": "Botswana",
- "by": "Belarus",
- "bz": "Belize",
- "ca": "Canada",
- "cg": "Republic Of Congo",
- "ch": "Switzerland",
- "cl": "Chile",
- "cn": "China",
- "co": "Colombia",
- "cr": "Costa Rica",
- "cv": "Cape Verde",
- "cy": "Cyprus",
- "cz": "Czech Republic",
- "de": "Germany",
- "dk": "Denmark",
- "dm": "Dominica",
- "do": "Dominican Republic",
- "dz": "Algeria",
- "ec": "Ecuador",
- "ee": "Estonia",
- "eg": "Egypt",
- "es": "Spain",
- "fi": "Finland",
- "fj": "Fiji",
- "fm": "Federated States Of Micronesia",
- "fr": "France",
- "gb": "United Kingdom",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Greece",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hong Kong",
- "hn": "Honduras",
- "hr": "Croatia",
- "hu": "Hungary",
- "id": "Indonesia",
- "ie": "Ireland",
- "il": "Israel",
- "in": "India",
- "is": "Iceland",
- "it": "Italy",
- "jm": "Jamaica",
- "jo": "Jordan",
- "jp": "Japan",
- "ke": "Kenya",
- "kg": "Kyrgyzstan",
- "kh": "Cambodia",
- "kn": "St. Kitts and Nevis",
- "kr": "Republic Of Korea",
- "kw": "Kuwait",
- "ky": "Cayman Islands",
- "kz": "Kazakstan",
- "la": "Lao People’s Democratic Republic",
- "lb": "Lebanon",
- "lc": "St. Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Lithuania",
- "lu": "Luxembourg",
- "lv": "Latvia",
- "md": "Republic Of Moldova",
- "mg": "Madagascar",
- "mk": "North Macedonia",
- "ml": "Mali",
- "mn": "Mongolia",
- "mo": "Macau",
- "mr": "Mauritania",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Mexico",
- "my": "Malaysia",
- "mz": "Mozambique",
- "na": "Namibia",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Netherlands",
- "no": "Norway",
- "np": "Nepal",
- "nz": "New Zealand",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua New Guinea",
- "ph": "Philippines",
- "pk": "Pakistan",
- "pl": "Poland",
- "pt": "Portugal",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Romania",
- "ru": "Russia",
- "sa": "Saudi Arabia",
- "sb": "Solomon Islands",
- "sc": "Seychelles",
- "se": "Sweden",
- "sg": "Singapore",
- "si": "Slovenia",
- "sk": "Slovakia",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Suriname",
- "st": "Sao Tome and Principe",
- "sv": "El Salvador",
- "sz": "Swaziland",
- "tc": "Turks and Caicos",
- "td": "Chad",
- "th": "Thailand",
- "tj": "Tajikistan",
- "tm": "Turkmenistan",
- "tn": "Tunisia",
- "tr": "Turkey",
- "tt": "Trinidad and Tobago",
- "tw": "Taiwan",
- "tz": "Tanzania",
- "ua": "Ukraine",
- "ug": "Uganda",
- "us": "United States",
- "uy": "Uruguay",
- "uz": "Uzbekistan",
- "vc": "St. Vincent and The Grenadines",
- "ve": "Venezuela",
- "vg": "British Virgin Islands",
- "vn": "Vietnam",
- "ye": "Yemen",
- "za": "South Africa",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Current Channel",
- "deferred": "Semi-Annual Enterprise Channel",
- "firstReleaseCurrent": "Current Channel (Preview)",
- "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
- "monthlyEnterprise": "Monthly Enterprise Channel",
- "placeHolder": "Select one"
- },
- "AppProtection": {
- "allAppTypes": "Target to all app types",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Apps in Android Work Profile",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
- "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
- "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
- "appsOnUnmanagedDevices": "Apps on unmanaged devices",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Not Available",
- "windows10PlatformLabel": "Windows 10 and later",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Built-in Role",
- "customCloudPCRole": "Custom Windows 365 role",
- "customIntuneRole": "Custom Intune role",
- "customRole": "Custom Role"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "header": "Are you sure you want to delete this restriction?"
- },
- "DeviceLimit": {
- "description": "Specify the maximum number of devices a user can enroll.",
- "header": "Device limit restrictions",
- "info": "Define how many devices each user can enroll."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Must be 1.0 or greater.",
- "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
- "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
- "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
- "min": "Minimum cannot be lower than {0}",
- "minMax": "Minimum version cannot be greater than maximum version.",
- "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
- "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
- },
- "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
- "blockManufacturerPlaceHolder": "Manufacturer name",
- "blockManufacturersHeader": "Blocked manufacturers",
- "cannotRestrict": "Restriction not supported",
- "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
- "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
- "configurations": "Configure platforms",
- "deviceManufacturer": "Device manufacturer",
- "header": "Device type restrictions",
- "info": "Define which platforms, versions, and management types can enroll.",
- "manufacturer": "Manufacturer",
- "max": "Max",
- "maxVersion": "Maximum version",
- "min": "Min",
- "minVersion": "Minimum version",
- "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
- "personal": "Personally owned",
- "platform": "Platform",
- "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
- "platformSettings": "Platform settings",
- "platforms": "Select platforms",
- "platformsSelected": "{0} platforms selected",
- "type": "Type",
- "versions": "versions",
- "versionsRange": "Allow min/max range:",
- "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
- },
- "Priority": {
- "saved": "Restriction Priorities were successfully saved."
- },
- "Row": {
- "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
- },
- "Table": {
- "deployed": "Deployed",
- "name": "Name",
- "priority": "Priority"
- },
- "Type": {
- "limit": "Device limit restriction",
- "type": "Device type restriction"
- },
- "allUsers": "All Users",
- "androidRestrictions": "Android restrictions",
- "create": "Create restriction",
- "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
- "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
- "deleteTitle": "Are you sure you want to delete {0} restriction?",
- "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
- "edit": "Edit restriction",
- "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
- "iosRestrictions": "iOS restrictions",
- "mDM": "MDM",
- "macRestrictions": "macOS restrictions",
- "maxVersion": "Max Version",
- "minVersion": "Min Version",
- "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
- "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
- "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
- "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
- "notFound": "Restriction not found. It may have already been deleted.",
- "personallyOwned": "Personally owned devices",
- "restriction": "Restriction",
- "restrictionLowerCase": "restriction",
- "restrictionType": "Restriction type",
- "selectType": "Select restriction type",
- "selectValidation": "Please select a platform",
- "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
- "typeRequired": "Restriction type is required.",
- "winPhoneRestrictions": "Windows Phone restrictions",
- "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
- "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
- "windowsRestrictions": "Windows restrictions",
- "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
- },
- "InstallContextType": {
- "device": "Device",
- "deviceContext": "Device context",
- "user": "User",
- "userContext": "User context"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Description",
- "placeholder": "Enter a description"
- },
- "NameTextBox": {
- "label": "Name",
- "placeholder": "Enter a name"
- },
- "PublisherTextBox": {
- "label": "Publisher",
- "placeholder": "Enter a publisher"
- },
- "VersionTextBox": {
- "label": "Version"
- },
- "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
- },
- "ScopeTags": {
- "headerDescription": "Select one or more groups to assign the script package."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Detection script",
- "placeholder": "Input script text",
- "requiredValidationMessage": "Please enter the detection script"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Enforce script signature check"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Run this script using the logged-on credentials"
- },
- "RemediationScript": {
- "infoBox": "This script will run in detect-only mode because there is no remediation script."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Remediation script",
- "placeholder": "Input script text"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Run script in 64-bit PowerShell"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
- },
- "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
- "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
- },
- "title": "Create custom script",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Interval",
- "time": "Date and time"
- },
- "Interval": {
- "day": "Repeats every day",
- "days": "Repeats every {0} days",
- "hour": "Repeats every hour",
- "hours": "Repeats every {0} hours",
- "month": "Repeats every month",
- "months": "Repeats every {0} months",
- "week": "Repeats every week",
- "weeks": "Repeats every {0} weeks"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) on {1}",
- "withDate": "{0} on {1}"
- }
- }
- },
- "Edit": {
- "title": "Edit - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Allowed URLs",
- "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "ApplicationProxyRedirection": {
- "header": "Application proxy",
- "title": "Application proxy redirection",
- "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
- },
- "BlockedURLs": {
- "title": "Blocked URLs",
- "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "Bookmarks": {
- "header": "Managed bookmarks",
- "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Managed homepage",
- "title": "Homepage shortcut URL",
- "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Redirect restricted sites to personal context",
- "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
- }
- },
- "BooleanActions": {
- "allow": "Allow",
- "block": "Block",
- "configured": "Configured",
- "disable": "Disable",
- "dontRequire": "Don't Require",
- "enable": "Enable",
- "hide": "Hide",
- "limit": "Limit",
- "notConfigured": "Not configured",
- "require": "Require",
- "show": "Show",
- "yes": "Yes"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Make available to users as an optional update",
- "optionalValue": "Optional",
- "required": "Make available to users as a required update",
- "requiredValue": "Required"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 day",
- "twoDays": "2 days",
- "zeroDays": "0 days"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Overview"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load iOS software update profiles"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS update profile",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profile"
- },
- "listLoadError": "Unable to load iOS software update profiles, try again later",
- "lowercase": "iOS update policy",
- "uppercase": "iOS Update policy"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
- "latestUpdate": "Latest update",
- "noLongerSupported": "Selected version is no longer supported",
- "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
- "prefix": "Install iOS/iPadOS",
- "selectSupported": "Select update version supported by Apple",
- "updateToInstall": "Update to install"
- },
- "Schedule": {
- "always": "Update at next check-in",
- "duringTimeWindows": "Update during scheduled time",
- "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
- "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
- "label": "Schedule type",
- "outsideActiveHours": "Update outside of active hours (legacy)",
- "outsideTimeWindows": "Update outside of scheduled time",
- "timeWindow": "Time window",
- "timeZone": "Time zone",
- "title": "Update policy schedule settings:",
- "weekly": "Weekly schedule",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
- "label": "Select version to install"
- },
- "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
- "notAvailable": "N/A"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "There are no iOS update policies to display",
- "macOsUpdates": "There are no macOS software update policies to display",
- "windowsUpdates": "There are no update rings for Windows 10 and later to show."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Device name",
- "deviceUpdateStatus": "Device update status",
- "lastUpdated": "Last updated",
- "osVersion": "OS version",
- "userPrincipalName": "User name"
- },
- "maximumOSVersionFilter": "Maximum OS version",
- "minimumOSVersionFilter": "Minimum OS version",
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by device name, user name or OS version",
- "title": "Account summary for macOS devices"
- },
- "Category": {
- "configurationDataFile": "Configuration data file",
- "critical": "Critical",
- "firmware": "Firmware",
- "other": "Other"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "successfulUpdateCount": "Successful updates deployed",
- "totalUpdateCount": "Total updates deployed",
- "updateCategory": "Update category",
- "updateCategoryStatus": "Update category status"
- },
- "noData": "No data to display"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load macOS software update profiles"
- }
- },
- "State": {
- "available": "Available",
- "commandFailed": "Command failed",
- "downloadFailed": "Download failed",
- "downloadInsufficientNetwork": "Download insufficient network",
- "downloadInsufficientPower": "Download insufficient power",
- "downloadInsufficientSpace": "Download insufficient space",
- "downloaded": "Downloaded",
- "downloading": "Downloading",
- "idle": "Idle",
- "installFailed": "Install failed",
- "installInsufficientPower": "Install insufficient power",
- "installInsufficientSpace": "Install insufficient space",
- "installing": "Installing",
- "scheduled": "Scheduled",
- "success": "Success",
- "unknown": "Unknown"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "updateName": "Update name",
- "updateStatus": "Update status",
- "version": "Version"
- },
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by update name or version"
- },
- "SummaryBlade": {
- "subtitle": "macOS update profile",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profile"
- },
- "error": "Error",
- "errorOrErrors": "Error(s)",
- "errors": "Errors",
- "listLoadError": "Unable to load macOS software update profiles, try again later",
- "lowercase": "macOs update policy",
- "other": "Other",
- "subtitle": "MacOS software update",
- "upToDate": "Up to date",
- "uppercase": "macOS Update Policy"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Please try again later",
- "title": "Failed to delete {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Please try again later"
- },
- "LoadConfigurationFailed": {
- "description": "Please try again later",
- "title": "Failed to load {0}"
- },
- "idWrongFormat": "The provided id for the profile is not in the expected format."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "At least one time window should be selected",
- "tooMany": "A maximum of 20 time windows can be configured"
- }
- },
- "endDay": "End day",
- "endTime": "End time",
- "startDay": "Start day",
- "startTime": "Start time",
- "timeWindowError": "Choose a window of time that spans at least one hour."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load update ring profiles for Windows 10 and later."
- }
- },
- "SummaryBlade": {
- "subtitle": "Update ring for Windows 10 and later",
- "title": "Windows Update for Business"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 and later",
- "title": "Update ring for Windows 10 and later"
- },
- "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
- "lowercase": "Update ring",
- "uppercase": "Update Ring"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Update policy settings",
- "updateRingSettings": "Update ring settings"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Create {0}",
- "edit": "Edit {0}"
- }
- },
- "notScannedYet": "Not scanned yet",
- "outOfDateIosDevices": "Out of date iOS devices"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Device restrictions (device owner)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS Update policy"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Equals",
+ "greaterThan": "Greater than",
+ "greaterThanOrEqualTo": "Greater than or equal to",
+ "lessThan": "Less than",
+ "lessThanOrEqualTo": "Less than or equal to",
+ "notEqualTo": "Not equal to"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Enforce script signature check and run script silently",
+ "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
+ "header": "Use a custom detection script",
+ "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
+ "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileNotSelectedValidation": "No script file is selected.",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
+ "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Date created",
+ "dateModified": "Date modified",
+ "doesNotExist": "File or folder does not exist",
+ "fileOrFolderExists": "File or folder exists",
+ "sizeInMB": "Size in MB",
+ "version": "String (version)"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "fileOrFolder": "File or folder",
+ "fileOrFolderToolTip": "The file or folder to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "path": "Path",
+ "pathTooltip": "The full path of the folder containing the file or folder to detect.",
+ "value": "Value",
+ "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
+ },
+ "GridColumns": {
+ "pathOrCode": "Path/Code",
+ "type": "Type"
+ },
+ "MsiRule": {
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
+ "productCode": "MSI product code",
+ "productCodeTooltip": "A valid MSI product code for the app.",
+ "productVersion": "Value",
+ "productVersionCheck": "MSI product version check",
+ "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
+ "productVersionTooltip": "Enter the MSI product version for the app."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Integer comparison",
+ "keyDoesNotExist": "Key does not exist",
+ "keyExists": "Key exists",
+ "stringComparison": "String comparison",
+ "valueDoesNotExist": "Value does not exist",
+ "valueExists": "Value exists",
+ "versionComparison": "Version comparison"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "value": "Value",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the registry value to detect.",
+ "valueTooltip": "Select a value that matches the selected detection method."
+ },
+ "RuleTypeOptions": {
+ "file": "File",
+ "mSI": "MSI",
+ "registry": "Registry"
+ },
+ "gridAriaLabel": "Detection Rules",
+ "header": "Create a rule that indicates the presence of the app.",
+ "noRulesSelectedPlaceholder": "No rules are specified.",
+ "ruleTableLimit": "You can add up to 25 detection rules",
+ "ruleType": "Rule type",
+ "ruleTypeTooltip": "Choose the type of detection rule to add."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Use a custom detection script",
+ "manual": "Manually configure detection rules"
+ },
+ "bladeTitle": "Detection rules",
+ "header": "Configure app specific rules used to detect the presence of the app.",
+ "rulesFormat": "Rules format",
+ "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
+ "selectorLabel": "Detection rules"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Accept the Microsoft Software License Terms on behalf of users",
"appSuiteConfigurationLabel": "App suite configuration",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} language(s) selected",
"xmlConfigurationLabel": "XML Configuration"
},
- "Filters": {
- "ruleSyntax": "Rule syntax",
- "filters": "Filters"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Allow user to change setting",
- "tooltip": "Specify if the user is allowed to change the setting."
- },
- "AllowWorkAccounts": {
- "title": "Allow only work or school accounts",
- "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
- },
- "BlockExternalImages": {
- "title": "Block external images",
- "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
- },
- "ConfigureEmail": {
- "title": "Configure email account settings"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
- "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
- },
- "title": "Default app signature"
- },
- "OfficeFeedReplies": {
- "title": "Discover Feed",
- "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
- },
- "OrganizeMailByThread": {
- "title": "Organize mail by thread",
- "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
- },
- "PlayMyEmails": {
- "title": "Play My Emails",
- "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
- },
- "SuggestedReplies": {
- "title": "Suggested replies",
- "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
- },
- "SyncCalendars": {
- "title": "Sync Calendars",
- "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
- },
- "TextPredictions": {
- "title": "Text Predictions",
- "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
- },
- "ThemesEnabled": {
- "title": "Themes enabled",
- "tooltip": "Specify if the user is allowed to use a custom visual theme."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS devices"
- },
- "ManagedDesktop": {
- "adminContacts": "Admin contacts",
- "appPackaging": "App packaging",
- "autopatchGroups": "Autopatch groups",
- "devices": "Devices",
- "featureEnablement": "Feature activate",
- "feedback": "Feedback",
- "gettingStarted": "Getting started",
- "messages": "Messages",
- "onlineResources": "Online resources",
- "policyHealth": "Policy health",
- "policyHealthPreview": "Policy health (preview)",
- "releaseManagement": "Release management",
- "serviceRequests": "Service requests",
- "settings": "Settings",
- "supportRequests": "Support requests",
- "tenantEnrollment": "Tenant enrollment",
- "tenantManagement": "Tenant management"
- },
- "actions": "Actions for Non-Compliance",
- "advancedExchangeSettings": "Exchange online settings",
- "advancedThreatProtection": "Microsoft Defender for Endpoint",
- "allApps": "All apps",
- "allDevices": "All devices",
- "androidFotaDeployments": "Android FOTA deployments",
- "appBundles": "App Bundles",
- "appCategories": "App categories",
- "appConfigPolicies": "App configuration policies",
- "appConfigurationStatus": "App Configuration Status",
- "appInstallStatus": "App install status",
- "appLicences": "App licenses",
- "appProtectionPolicies": "App protection policies",
- "appProtectionStatus": "App Protection status",
- "appSelectiveWipe": "App selective wipe",
- "appleVppTokens": "Apple VPP Tokens",
- "apps": "Apps",
- "assign": "Assignments",
- "assignedPermissions": "Assigned permissions",
- "assignedRoles": "Assigned roles",
- "autopilotDeploymentReport": "Autopilot deployments (preview)",
- "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
- "brandingAndCustomization": "Customization",
- "cartProfiles": "Cart profiles",
- "certificateConnectors": "Certificate connectors",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Cloud attached devices (preview)",
- "cloudPcActions": "Cloud PC actions (preview)",
- "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
- "compliancePolicies": "Compliance policies",
- "complianceScriptManagement": "Scripts",
- "complianceScriptManagementPreview": "Scripts (preview)",
- "complianceSettings": "Compliance policy settings",
- "conditionStatements": "Condition statements",
- "conditions": "Locations",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Configuration profiles",
- "configurationScripts": "Configuration Scripts",
- "connectorsAndTokens": "Connectors and tokens",
- "corporateDeviceIdentifiers": "Corporate device identifiers",
- "customAttributes": "Custom attributes",
- "customNotifications": "Custom notifications",
- "deploymentSettings": "Deployment settings",
- "derivedCredentials": "Derived Credentials",
- "deviceActions": "Device actions",
- "deviceCategories": "Device categories",
- "deviceCleanUp": "Device clean-up rules",
- "deviceEnrollmentManagers": "Device enrollment managers",
- "deviceExecutionStatus": "Device status",
- "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
- "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
- "devices": "Devices",
- "discoveredApps": "Discovered apps",
- "edgePolicies": "Policies for Microsoft Edge",
- "embeddedSIM": "eSIM cellular profiles (preview)",
- "enrollDevices": "Enroll devices",
- "enrollmentFailures": "Enrollment failures",
- "enrollmentNotifications": "Enrollment notifications (preview)",
- "enrollmentRestrictions": "Enrollment restrictions",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange service connectors",
- "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
- "failuresForDriverUpdates": "Windows Driver update failures",
- "failuresForFeatureUpdates": "Feature update failures",
- "failuresForQualityUpdates": "Windows Expedited update failures",
- "featureFlighting": "Feature flighting",
- "featureUpdateDeployments": "Feature updates for Windows 10 and later",
- "flighting": "Flighting",
- "fotaUpdate": "Firmware over-the-air update",
- "groupPolicy": "Administrative Templates",
- "groupPolicyAnalytics": "Group policy analytics",
- "helpSupport": "Help and support",
- "helpSupportReplacement": "Help and support ({0})",
- "iOSAppProvisioning": "iOS app provisioning profiles",
- "incompleteUserEnrollments": "Incomplete user enrollments",
- "iosUpdates": "Update policies for iOS/iPadOS",
- "legacyPcManagement": "Legacy PC management",
- "macOSSoftwareUpdate": "Update policies for macOS",
- "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
- "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
- "macOSSoftwareUpdateStateSummaries": "updates",
- "managedGooglePlay": "Managed Google Play",
- "msfb": "Microsoft Store for Business",
- "myPermissions": "My permissions",
- "notifications": "Notifications",
- "officeApps": "Office apps",
- "officeProPlusPolicies": "Policies for Office apps",
- "onPremise": "On Premise",
- "onPremisesConnector": "Exchange ActiveSync on-premises connector",
- "onPremisesDeviceAccess": "Exchange ActiveSync devices",
- "onPremisesManageAccess": "Exchange on-premises access",
- "outOfDateIosDevices": "Installation failures for iOS devices",
- "overview": "Overview",
- "partnerDeviceManagement": "Partner device management",
- "perUpdateRingDeploymentState": "Per update ring deployment state",
- "permissions": "Permissions",
- "platformApps": "{0} apps",
- "platformDevices": "{0} devices",
- "platformEnrollment": "{0} enrollment",
- "policies": "Policies",
- "profiles": "Profiles",
- "properties": "Properties",
- "reports": "Reports",
- "retireNoncompliantDevices": "Retire noncompliant devices",
- "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
- "role": "Role",
- "scriptManagement": "Scripts",
- "securityBaselines": "Security baselines",
- "serviceToServiceConnector": "Exchange online connector",
- "servicenowConnector": "ServiceNow connector",
- "shellScripts": "Shell scripts",
- "teamViewerConnector": "TeamViewer connector",
- "telecomeExpenseManagement": "Telecom expense management",
- "tenantAdmin": "Tenant admin",
- "tenantAdministration": "Tenant administration",
- "termsAndConditions": "Terms and conditions",
- "titles": "Titles",
- "troubleshoot": "Troubleshoot",
- "troubleshootSupport": "Troubleshooting + support",
- "user": "User",
- "userExecutionStatus": "User status",
- "wdacSupplementalPolicies": "S mode supplemental policies",
- "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
- "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
- "windows10DriverUpdate": "Driver updates for Windows 10 and later",
- "windows10QualityUpdate": "Quality updates for Windows 10 and later",
- "windows10UpdateRings": "Update rings for Windows 10 and later",
- "windows10XPolicyFailures": "Windows 10X policy failures",
- "windows365PartnerConnector": "Windows 365 partner connectors",
- "windowsDiagnosticData": "Windows data",
- "windowsEnterpriseCertificate": "Windows enterprise certificate",
- "windowsManagement": "Scripts",
- "windowsSideLoadingKeys": "Windows side loading keys",
- "windowsSymantecCertificate": "Windows DigiCert certificate",
- "windowsThreatReport": "Threat agent status"
- },
- "ScopeTypes": {
- "allDevices": "All Devices",
- "allUsers": "All Users",
- "allUsersAndDevices": "All Users & All Devices",
- "selectedGroups": "Selected Groups"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search as default",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype for Business",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone and iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Not supported",
+ "supportEnding": "Support ending",
+ "supported": "Supported"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Default",
- "header": "Update Priority",
- "postponed": "Postponed",
- "priority": "High Priority"
- },
- "AutoUpdateSupersededApps": {
- "label": "Auto-update",
- "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Allow user to snooze the restart notification",
- "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
- "durationInMinutes": "Device restart grace period (minutes)",
- "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Time zone",
- "local": "Device time zone",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Date and time",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
- "deadlineTimeLabel": "App installation deadline",
- "defaultTime": "As soon as possible",
- "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
- "specificTime": "A specific date and time",
- "startTimeColumnLabel": "Availability",
- "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
- "startTimeLabel": "App availability"
- },
- "restartGracePeriodHeader": "Restart grace period",
- "restartGracePeriodLabel": "Device restart grace period",
- "summaryTitle": "End user experience"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "The file or folder as the selected requirement.",
- "pathToolTip": "The complete path of the file or folder to detect.",
- "property": "Property",
- "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
- },
- "GridColumns": {
- "pathOrScript": "Path/Script",
- "type": "Type"
- },
- "Registry": {
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the comparison.",
- "registryRequirement": "Registry key requirement",
- "registryRequirementTooltip": "Select the registry key requirement comparison.",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the required registry value."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Automatically approve all recommended driver updates",
+ "manual": "Manually approve and deploy driver updates"
+ },
+ "BulkActions": {
+ "button": "Bulk actions"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Approval method:"
},
- "RequirementTypeOptions": {
- "fileType": "File",
- "registry": "Registry",
- "script": "Script"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Boolean",
- "dateTime": "Date and Time",
- "float": "Floating Point",
- "integer": "Integer",
- "string": "String",
- "version": "Version"
- },
- "duplicateName": "Script name {0} has already been used. Please enter a different name.",
- "enforceSignatureCheck": "Enforce script signature check",
- "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
- "loggedOnCredentials": "Run this script using the logged on credentials",
- "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
- "operatorTooltip": "Select the operator for the requirement comparison.",
- "requirementMethod": "Select output data type",
- "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
- "scriptName": "Script name",
- "value": "Value",
- "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ "DeploymentDeferralInDays": {
+ "label": "Make updates available after",
+ "units": "(days)",
+ "value": "{0} days"
+ },
+ "DriverAction": {
+ "header": "Select an action below.",
+ "label": "Driver action",
+ "placeholder": "Select an action"
},
- "bladeTitle": "Add a Requirement rule",
- "createRequirementHeader": "Create a requirement.",
- "header": "Configure additional requirement rules",
- "label": "Additional requirement rules",
- "noRequirementsSelectedPlaceholder": "No requirements are specified.",
- "requirementType": "Requirement type",
- "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
- },
- "architectures": "Operating system architecture",
- "architecturesTooltip": "Choose the architectures needed to install the app.",
- "bladeTitle": "Requirements",
- "diskSpace": "Disk space required (MB)",
- "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
- "header": "Specify the requirements that devices must meet before the app is installed:",
- "maximumTextFieldValue": "The value must be at most {0}.",
- "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
- "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
- "minimumLogicalProcessors": "Minimum number of logical processors required",
- "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
- "minimumOperatingSystem": "Minimum operating system",
- "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
- "minumumTextFieldValue": "The value must be at least {0}.",
- "physicalMemory": "Physical memory required (MB)",
- "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
- "selectorLabel": "Requirements",
- "validNumber": "Please enter a valid number."
- },
- "PolicySet": {
- "appManagement": "Application management",
- "assignments": "Assignments",
- "basics": "Basics",
- "deviceEnrollment": "Device enrollment",
- "deviceManagement": "Device management",
- "scopeTags": "Scope tags",
- "appConfigurationTitle": "App configuration policies",
- "appProtectionTitle": "App protection policies",
- "appTitle": "Apps",
- "iOSAppProvisioningTitle": "iOS app provisioning profiles",
- "deviceLimitRestrictionTitle": "Device limit restrictions",
- "deviceTypeRestrictionTitle": "Device type restrictions",
- "enrollmentStatusSettingTitle": "Enrollment status pages",
- "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
- "deviceComplianceTitle": "Device compliance policies",
- "deviceConfigurationTitle": "Device configuration profiles",
- "powershellScriptTitle": "Powershell scripts"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Included drivers"
+ },
+ "SelectDrivers": {
+ "header": "Select drivers to include in your bulk action"
+ },
+ "SelectDriversToInclude": {
+ "button": "Select drivers to include"
+ },
+ "SelectLessDrivers": {
+ "validation": "At most one hundred drivers can be selected"
+ },
+ "SelectMoreDrivers": {
+ "validation": "At least one driver should be selected"
+ },
+ "SelectedDrivers": {
+ "label": "Selected drivers"
+ },
+ "availabilityDate": "Make available in Windows Update",
+ "bladeTitle": "Driver updates Windows 10 and later (preview)",
+ "lastSync": "Last sync:",
+ "lastSyncDefaultText": "Pending initial inventory collection",
+ "loadError": "Loading failed!"
+ },
+ "DriverStatus": {
+ "approved": "Approved",
+ "declined": "Declined",
+ "export": "Exporting recommended drivers",
+ "needsReview": "Needs review",
+ "paused": "Paused"
+ },
+ "DriversToReview": {
+ "text": "{0} to review"
+ },
+ "Subtitle": {
+ "automatic": "Automatic approval driver update policy",
+ "manual": "Manual approval driver update policy"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Recommended",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrain",
- "countryNameZA": "South Africa",
- "countryNameJO": "Jordan",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Czech Republic",
- "countryNameLT": "Lithuania",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hong Kong SAR",
- "countryNameGH": "Ghana",
- "countryNameSA": "Saudi Arabia",
- "countryNamePG": "Papua New Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "India",
- "countryNameHN": "Honduras",
- "countryNameRO": "Romania",
- "countryNameKZ": "Kazakhstan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Georgia",
- "countryNameTT": "Trinidad and Tobago",
- "countryNameMP": "Northern Mariana Islands",
- "countryNameMV": "Maldives",
- "countryNameFI": "Finland",
- "countryNameNO": "Norway",
- "countryNameEE": "Estonia",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Uzbekistan",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tajikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "France",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italy",
- "countryNameAZ": "Azerbaijan",
- "countryNameKG": "Kyrgyzstan",
- "countryNameWF": "Wallis and Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falkland Islands (Islas Malvinas)",
- "countryNameGY": "Guyana",
- "countryNameSS": "South Sudan",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Syria",
- "countryNameMD": "Moldova",
- "countryNameVC": "Saint Vincent and the Grenadines",
- "countryNameID": "Indonesia",
- "countryNameRE": "Reunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "North Macedonia",
- "countryNameTG": "Togo",
- "countryNamePF": "French Polynesia",
- "countryNameKY": "Cayman Islands",
- "countryNameIO": "British Indian Ocean Territory",
- "countryNameRU": "Russia",
- "countryNameMA": "Morocco",
- "countryNameAU": "Australia",
- "countryNameBO": "Bolivia",
- "countryNameVA": "Holy See (Vatican City State)",
- "countryNameVG": "Virgin Islands, British",
- "countryNameFM": "Micronesia",
- "countryNameAQ": "Antarctica",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brazil",
- "countryNameIS": "Iceland",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgaria",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamas, The",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macao SAR",
- "countryNameRW": "Rwanda",
- "countryNameAS": "American Samoa",
- "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
- "countryNameMF": "Saint Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "New Caledonia",
- "countryNameAC": "Ascension Island",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladesh",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Canada",
- "countryNameSH": "Saint Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolia",
- "countryNamePA": "Panama",
- "countryNameCM": "Cameroon",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japan",
- "countryNameCY": "Cyprus",
- "countryNameCD": "Democratic Republic of Congo",
- "countryNameTN": "Tunisia",
- "countryNameTR": "Türkiye",
- "countryNameWS": "Samoa",
- "countryNameSE": "Sweden",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Cambodia",
- "countryNamePL": "Poland",
- "countryNameDZ": "Algeria",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominica",
- "countryNameEG": "Egypt",
- "countryNameGF": "French Guiana",
- "countryNameNZ": "New Zealand",
- "countryNamePS": "Palestinian Authority",
- "countryNameIL": "Israel",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Greece",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauritania",
- "countryNameVI": "Virgin Islands, U.S.",
- "countryNameGQ": "Equatorial Guinea",
- "countryNameMX": "Mexico",
- "countryNameDJ": "Djibouti",
- "countryNameGN": "Guinea",
- "countryNameCN": "China",
- "countryNameMZ": "Mozambique",
- "countryNameBV": "Bouvet Island",
- "countryNameNF": "Norfolk Island",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "South Georgia and the South Sandwich Islands",
- "countryNameRS": "Serbia",
- "countryNameCC": "Cocos (Keeling) Islands",
- "countryNameNA": "Namibia",
- "countryNameDE": "Germany",
- "countryNameCG": "Republic of Congo",
- "countryNameKW": "Kuwait",
- "countryNameMH": "Marshall Islands",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarus",
- "countryNameMY": "Malaysia",
- "countryNameST": "São Tomé and Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Chad",
- "countryNameCX": "Christmas Island",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bissau",
- "countryNameUA": "Ukraine",
- "countryNameCU": "Cuba",
- "countryNameCO": "Colombia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Croatia",
- "countryNameSC": "Seychelles",
- "countryNameNL": "Netherlands",
- "countryNameUM": "US Minor Outlying Islands",
- "countryNameIM": "Isle of Man",
- "countryNameFJ": "Fiji",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "United Kingdom",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovenia",
- "countryNameAM": "Armenia",
- "countryNameAR": "Argentina",
- "countryNamePM": "Saint Pierre and Miquelon",
- "countryNameTF": "French Southern and Antarctic Lands",
- "countryNameDO": "Dominican Republic",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugal",
- "countryNameCF": "Central African Republic",
- "countryNameBE": "Belgium",
- "countryNameKM": "Comoros",
- "countryNameLY": "Libya",
- "countryNameIE": "Ireland",
- "countryNameKP": "North Korea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slovakia",
- "countryNameTC": "Turks and Caicos Islands",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Yemen",
- "countryNameBA": "Bosnia and Herzegovina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Iraq",
- "countryNameSJ": "Svalbard and Jan Mayen Island",
- "countryNameAX": "Åland Islands",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Faroe Islands",
- "countryNameBL": "Saint Barthélemy",
- "countryNameLB": "Lebanon",
- "countryNameJM": "Jamaica",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Spain",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapore",
- "countryNameAL": "Albania",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d’Ivoire",
- "countryNameTW": "Taiwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cook Islands",
- "countryNameTH": "Thailand",
- "countryNameHM": "Heard Island and McDonald Islands",
- "countryNameGD": "Grenada",
- "countryNameUS": "United States",
- "countryNameAT": "Austria",
- "countryNameKR": "Korea, Republic of",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Denmark",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Ethiopia",
- "countryNameMG": "Madagascar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxembourg",
- "countryNameQA": "Qatar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Solomon Islands",
- "countryNameAE": "United Arab Emirates",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua and Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Hungary",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Switzerland",
- "countryNamePN": "Pitcairn Islands",
- "countryNameGL": "Greenland",
- "countryNamePH": "Philippines",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts and Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Latvia",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "Unable to sync {0}",
+ "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
+ "pending": "{0} sync in progress",
+ "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
+ "success": "{0} sync complete",
+ "successDescription": "Sync with WUfB service completed at {0}"
+ },
+ "SyncSpinner": {
+ "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
+ },
+ "TabName": {
+ "basics": "Basics",
+ "driverUpdateSettings": "Settings",
+ "otherDrivers": "Other drivers",
+ "properties": "Properties",
+ "recommendedDrivers": "Recommended drivers"
+ },
+ "driverAddFilter": "Add filter",
+ "driverApplicableDevices": "Applicable devices",
+ "driverApprovalStatus": "Status",
+ "driverBulkActions": "Bulk actions",
+ "driverClass": "Driver class",
+ "driverCount": "Showing {0} to {1} of {2} records",
+ "driverFilterNoneSelected": "None selected",
+ "driverManufacturer": "Manufacturer",
+ "driverName": "Driver name",
+ "driverNameLower": "windows driver update deployment",
+ "driverNameUpper": "Windows driver update deployment",
+ "driverRefresh": "Refresh",
+ "driverReleaseDate": "Release date",
+ "driverSearch": "Search",
+ "driverSearchKeyword": "Enter search keyword",
+ "driverVersion": "Version",
+ "firstDeploymentDate": "First Deployment",
+ "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
+ "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge configuration settings",
+ "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
+ "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
+ "generalAppConfig": "General app configuration",
+ "generalSettings": "General configuration settings",
+ "outlookSMIMEConfig": "Outlook S/MIME settings",
+ "outlookSettings": "Outlook configuration settings",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-zh-cht.json b/Documentation/Strings-zh-cht.json
index c699d0c..694fc4d 100644
--- a/Documentation/Strings-zh-cht.json
+++ b/Documentation/Strings-zh-cht.json
@@ -1,4 +1,1691 @@
{
+ "InstallContextType": {
+ "device": "Device",
+ "deviceContext": "Device context",
+ "user": "User",
+ "userContext": "User context"
+ },
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "One block action is required for all compliance policies.",
+ "graceperiod": "Schedule (days after noncompliance)",
+ "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
+ "subtitle": "Specify action parameters",
+ "title": "Action parameters"
+ },
+ "List": {
+ "gracePeriodDay": "{0} day after noncompliance",
+ "gracePeriodDays": "{0} days after noncompliance",
+ "gracePeriodHour": "{0} hour after noncompliance",
+ "gracePeriodHours": "{0} hours after noncompliance",
+ "gracePeriodMinute": "{0} minute after noncompliance",
+ "gracePeriodMinutes": "{0} minutes after noncompliance",
+ "immediately": "Immediately",
+ "schedule": "Schedule",
+ "scheduleInfoBalloon": "Days after noncompliance",
+ "subtitle": "Specify the sequence of actions on noncompliant devices",
+ "title": "Actions"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Others",
+ "additionalRecipients": "Additional recipients (via email)",
+ "additionalRecipientsBladeTitle": "Select additional recipients",
+ "emailAddressPrompt": "Enter email addresses (separated by commas)",
+ "invalidEmail": "Invalid email address",
+ "messageTemplate": "Message template",
+ "noneSelected": "None selected",
+ "notSelected": "Not selected",
+ "numSelected": "{0} selected",
+ "selected": "Selected"
+ },
+ "block": "Mark device noncompliant",
+ "lockDevice": "Lock device (local action)",
+ "lockDeviceWithPasscode": "Lock device (local action)",
+ "noAction": "No action",
+ "noActionRow": "No actions, select 'Add' to add an action",
+ "pushNotification": "Send push notification to end user",
+ "remoteLock": "Remotely lock the noncompliant device",
+ "removeSourceAccessProfile": "Remove source access profile",
+ "retire": "Add device to retire list",
+ "wipe": "Wipe",
+ "emailNotification": "Send email to end user"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Admin Groups",
+ "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
+ "rolesMenuTitle": "Endpoint Manager roles",
+ "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
+ "RoleAssignmentScope": "Scope Groups"
+ },
+ "AppInformationTab": {
+ "Info": {
+ "AppStoreUrl": {
+ "android": "Enter the link to the app listing in Google Play store. For example:",
+ "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
+ "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
+ "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
+ "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
+ "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
+ "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ },
+ "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
+ "applicableDeviceType": "Select the device types that can install this app.",
+ "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
+ "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
+ "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
+ "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
+ "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
+ "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
+ "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
+ "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
+ "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
+ "learnMore": "Learn more",
+ "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
+ "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
+ "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
+ "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
+ "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
+ "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
+ "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
+ "packageId": "The app Package Identifier is the unique value that identifies the app.",
+ "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
+ "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
+ "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
+ "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
+ "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
+ "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
+ "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
+ "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
+ "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
+ "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
+ },
+ "descriptionPreview": "Preview",
+ "descriptionRequired": "Description is required.",
+ "editDescription": "Edit Description",
+ "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
+ "name": "App information",
+ "nameForOfficeSuitApp": "App suite information"
+ },
+ "ScopeTypes": {
+ "allDevices": "All Devices",
+ "allUsers": "All Users",
+ "allUsersAndDevices": "All Users & All Devices",
+ "selectedGroups": "Selected Groups"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Description",
+ "placeholder": "Enter a description"
+ },
+ "NameTextBox": {
+ "label": "Name",
+ "placeholder": "Enter a name"
+ },
+ "PublisherTextBox": {
+ "label": "Publisher",
+ "placeholder": "Enter a publisher"
+ },
+ "VersionTextBox": {
+ "label": "Version"
+ },
+ "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
+ },
+ "ScopeTags": {
+ "headerDescription": "Select one or more groups to assign the script package."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Detection script",
+ "placeholder": "Input script text",
+ "requiredValidationMessage": "Please enter the detection script"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Enforce script signature check"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Run this script using the logged-on credentials"
+ },
+ "RemediationScript": {
+ "infoBox": "This script will run in detect-only mode because there is no remediation script."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Remediation script",
+ "placeholder": "Input script text"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Run script in 64-bit PowerShell"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
+ },
+ "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
+ "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
+ },
+ "title": "Create custom script",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Interval",
+ "time": "Date and time"
+ },
+ "Interval": {
+ "day": "Repeats every day",
+ "days": "Repeats every {0} days",
+ "hour": "Repeats every hour",
+ "hours": "Repeats every {0} hours",
+ "month": "Repeats every month",
+ "months": "Repeats every {0} months",
+ "week": "Repeats every week",
+ "weeks": "Repeats every {0} weeks"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) on {1}",
+ "withDate": "{0} on {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Edit - {0}"
+ }
+ },
+ "MinimumOperatingSystem": {
+ "Android": {
+ "v10": "Android 10.0",
+ "v11": "Android 11.0",
+ "v4": "Android 4.0 (Ice Cream Sandwich)",
+ "v403": "Android 4.0.3 (Ice Cream Sandwich)",
+ "v41": "Android 4.1 (Jelly Bean)",
+ "v42": "Android 4.2 (Jelly Bean)",
+ "v43": "Android 4.3 (Jelly Bean)",
+ "v44": "Android 4.4 (KitKat)",
+ "v5": "Android 5.0 (Lollipop)",
+ "v51": "Android 5.1 (Lollipop)",
+ "v6": "Android 6.0 (Marshmallow)",
+ "v7": "Android 7.0 (Nougat)",
+ "v71": "Android 7.1 (Nougat)",
+ "v8": "Android 8.0 (Oreo)",
+ "v81": "Android 8.1 (Oreo)",
+ "v9": "Android 9.0 (Pie)"
+ },
+ "IOS": {
+ "v10": "iOS 10.0",
+ "v11": "iOS 11.0",
+ "v12": "iOS 12.0",
+ "v13": "iOS 13.0",
+ "v14": "iOS 14.0",
+ "v15": "iOS 15.0",
+ "v16": "iOS 16.0",
+ "v17": "iOS 17.0",
+ "v8": "iOS 8.0",
+ "v9": "iOS 9.0"
+ },
+ "MacOS": {
+ "V10": {
+ "10": "OS X Yosemite 10.10",
+ "11": "OS X El Capitan 10.11",
+ "12": "macOS Sierra 10.12",
+ "13": "macOS High Sierra 10.13",
+ "14": "macOS Mojave 10.14",
+ "15": "macOS Catalina 10.15",
+ "7": "Mac OS X Lion 10.7",
+ "8": "OS X Mountain Lion 10.8",
+ "9": "OS X Mavericks 10.9"
+ },
+ "V11": {
+ "0": "macOS Big Sur 11.0"
+ },
+ "V12": {
+ "0": "macOS Monterey 12.0"
+ },
+ "V13": {
+ "0": "macOS Ventura 13.0"
+ },
+ "V14": {
+ "0": "macOS Sonoma 14.0"
+ }
+ },
+ "Windows": {
+ "V10Release": {
+ "release1607": "Windows 10 1607",
+ "release1703": "Windows 10 1703",
+ "release1709": "Windows 10 1709",
+ "release1803": "Windows 10 1803",
+ "release1809": "Windows 10 1809",
+ "release1903": "Windows 10 1903",
+ "release1909": "Windows 10 1909",
+ "release2004": "Windows 10 2004",
+ "release21H1": "Windows 10 21H1",
+ "release21H2": "Windows 10 21H2",
+ "release22H2": "Windows 10 22H2",
+ "release2H20": "Windows 10 20H2"
+ },
+ "V11Release": {
+ "release21H2": "Windows 11 21H2",
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
+ },
+ "v10": "Windows 10.0",
+ "v80": "Windows 8.0",
+ "v81": "Windows 8.1"
+ },
+ "WindowsPhone": {
+ "v80": "Windows Phone 8.0",
+ "v81": "Windows Phone 8.1"
+ }
+ },
+ "OfficeUpdateChannel": {
+ "current": "Current Channel",
+ "deferred": "Semi-Annual Enterprise Channel",
+ "firstReleaseCurrent": "Current Channel (Preview)",
+ "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
+ "monthlyEnterprise": "Monthly Enterprise Channel",
+ "placeHolder": "Select one"
+ },
+ "TableHeaders": {
+ "activity": "Activity",
+ "activityName": "Activity name",
+ "actor": "Initiated by (actor)",
+ "actorType": "Actor type",
+ "app": "App",
+ "appName": "App name",
+ "applicationName": "Application name",
+ "approvalType": "Approval method",
+ "assignedGroups": "Group",
+ "assignment": "Assignment",
+ "assignmentStatus": "Assigned",
+ "assignments": "Assignments",
+ "attributeName": "Attribute name",
+ "attributeType": "Attribute type",
+ "bundleId": "Bundle-Id",
+ "category": "Category",
+ "complianceGracePeriodExpiration": "Compliance grace period expiration",
+ "configurationType": "Profile type",
+ "conflictingPolicy": "Conflicting Policies",
+ "createdDate": "Created date",
+ "currentOs": "Current OS",
+ "date": "Date",
+ "dateRange": "Date range",
+ "deployed": "Deployed",
+ "description": "Description",
+ "device": "Device",
+ "deviceId": "Device ID",
+ "deviceName": "Device name",
+ "deviceOrApplicationName": "Device or application name",
+ "deviceReporting": "Devices reporting",
+ "diagnosticCode": "Diagnostic Code",
+ "diagnosticText": "Diagnostic Text",
+ "diagnostics": "Diagnostics",
+ "displayName": "Display name",
+ "driversToReview": "Drivers to review",
+ "eSIMActivationStatus": "Activation status",
+ "eSIMCellularStatus": "Cellular status",
+ "eSIMICCID": "ICCID",
+ "eSIMPoolName": "Cellular subscription",
+ "eSIMState": "eSIM state",
+ "eSIMTokenAmount": "Total eSIM activation codes",
+ "enabled": "Enabled",
+ "enabledPlatforms": "Enabled Platforms",
+ "encryptionReadiness": "Encryption Readiness",
+ "encryptionStatus": "Encryption Status",
+ "endTime": "End time",
+ "enrollment": "Enrollment",
+ "enrollmentAttempt": "Enrollment start",
+ "eventDateTime": "Timestamp",
+ "eventIdentifier": "Event ID",
+ "eventLevel": "Level",
+ "excluded": "Excluded",
+ "failure": "Failure",
+ "featureUpdateDeferral": "Feature Deferral",
+ "featureUpdateVersion": "Feature Update Version",
+ "featureUpdatesPaused": "Feature (Paused)",
+ "featureUpdatesStatus": "Feature",
+ "from": "From",
+ "groups": "Groups",
+ "groupsSelected": "Groups Selected",
+ "installationStatus": "Installation Status",
+ "issueId": "Issue id",
+ "lastCheckinTime": "Last Check-in Time",
+ "lastModified": "Last modified",
+ "lastScanTime": "Last Scan Time",
+ "lastSuccessfulSync": "Last Successful Sync",
+ "lastUpdated": "Last Updated",
+ "location": "Location",
+ "loggedInUser": "Logged in user",
+ "message": "Message",
+ "model": "Model",
+ "mtdConnector": "MTD Connector",
+ "name": "Profile name",
+ "oSVersion": "OS Version",
+ "operationType": "Operation type",
+ "os": "OS",
+ "packageName": "Package name",
+ "partnerName": "Partner",
+ "partnerStatus": "Partner status",
+ "permission": "Permission",
+ "platform": "Platform",
+ "policies": "Policies",
+ "policy": "Policy",
+ "policyType": "Policy type",
+ "preventedUpdateDays": "Restricted days",
+ "priority": "Priority",
+ "profiles": "Profiles",
+ "publicAddress": "Public address",
+ "publisher": "Publisher",
+ "qualityUpdateDeferral": "Quality Deferral",
+ "qualityUpdateRelease": "Quality Update Release",
+ "qualityUpdateVersion": "Quality Update Version",
+ "qualityUpdatesPaused": "Quality (Paused)",
+ "qualityUpdatesStatus": "Quality",
+ "reason": "Reason",
+ "resource": "Resource",
+ "roleName": "Name",
+ "roles": "Roles",
+ "scopeGroups": "Scope groups",
+ "scopeSize": "Assigned Scope Groups",
+ "scopeTags": "Scope tags",
+ "scriptName": "Script name",
+ "scriptType": "Script type",
+ "servicingOption": "Servicing channel",
+ "setting": "Setting",
+ "settings": "Settings",
+ "siteName": "Site name",
+ "source": "Source",
+ "sourceProfile": "Source Profile",
+ "startTime": "Start time",
+ "state": "State",
+ "stateDetails": "State details",
+ "status": "Status",
+ "subject": "Subject",
+ "support": "Support",
+ "supportEndDate": "Support End Date",
+ "tPMVersion": "TPM Version",
+ "target": "Target",
+ "timeWindows": "Time windows",
+ "timeZone": "Time zone",
+ "type": "Type",
+ "updateScheduleType": "Schedule type",
+ "updateStatus": "Update Status",
+ "user": "User",
+ "userPrincipalName": "User principal name",
+ "users": "Users",
+ "usersExcluded": "Users excluded",
+ "usersTargeted": "Users targeted",
+ "value": "Value",
+ "includedGroups": "Included Groups",
+ "excludedGroups": "Excluded Groups",
+ "licenseType": "License type"
+ },
+ "Inputs": {
+ "accountDomain": "Account domain",
+ "accountDomainHint": "e.g. contosodomain",
+ "accountDomainInfoBalloon": "Specify the user’s account domain.",
+ "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
+ "allowContactSetting": "Allow user to change contact setting",
+ "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
+ "allowUserChange": "Allow user to change setting",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
+ "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "App install context",
+ "appUrlLabel": "Appstore URL",
+ "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Applicable device type",
+ "assignmentActionLabel": "Mode",
+ "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
+ "authenticationMetod": "Authentication method",
+ "authenticationType": "Authentication type",
+ "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
+ "availableLicenseCount": "Available licenses",
+ "basicAuth": "Basic authentication",
+ "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
+ "bookNameLabel": "Book name",
+ "bundleDescriptionHint": "Enter a description that describes the apps included.",
+ "calendar": "Calendar",
+ "categoryLabel": "Category",
+ "categoryNameLabel": "Default name",
+ "certProfileType": "Certificate profile type",
+ "certificate": "Certificate",
+ "certificates": "Certificates",
+ "commandLineLabel": "Command-line arguments",
+ "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
+ "configurationSettingsFormatLabel": "Configuration settings format",
+ "configurationSettingsLabel": "Settings format",
+ "contactSync": "Save Contacts",
+ "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
+ "contacts": "Contacts",
+ "createdDateTime": "Created",
+ "defaultCategoryHint": "Default categories cannot be changed",
+ "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
+ "descriptionGenericLabel": "Description",
+ "descriptionHint": "Enter a description...",
+ "descriptionLabel": "Description",
+ "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
+ "developerLabel": "Developer",
+ "developerSizeHint": "The maximum length of the developer name is 256 characters.",
+ "disable": "Disable",
+ "disabled": "Disabled",
+ "displayNameLabel": "Name",
+ "displayVersionHint": "Enter the app version",
+ "displayVersionLabel": "App Version",
+ "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
+ "eBookCategoryNameLabel": "Default name",
+ "emailAccount": "Email account name",
+ "emailAccountHint": "e.g. Corporate Email",
+ "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
+ "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
+ "emailServer": "Email Server",
+ "emailServerHint": "e.g. mail.contoso.com",
+ "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
+ "enable": "Enable",
+ "enableSMime": "Enable S/MIME",
+ "enabled": "Enabled",
+ "encryptAllEmails": "Encrypt all emails",
+ "encryptionCertificates": "Encryption certificates",
+ "endUserNotifications": "End-user notifications",
+ "enrollmentTypeLabel": "Device enrollment type",
+ "externalRecipients": "External recipients MailTip",
+ "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
+ "focusedInbox": "Focused Inbox",
+ "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
+ "fullScreenEnabledLabel": "Full screen",
+ "gmailNineAmountOfEmail": "Amount of email to synchronize",
+ "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
+ "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
+ "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
+ "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
+ "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
+ "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
+ "ignoreManifestScope": "Ignore manifest scope",
+ "ignoreVersionDetection": "Ignore app version",
+ "informationUrlLabel": "Information URL",
+ "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
+ "installAsManaged": "Install as managed",
+ "installationSourceLabel": "App type",
+ "installerTypeInfoBalloon": "The installer type of the application package.",
+ "installerTypeLabel": "Installer Type",
+ "isFeatured": "Show this as a featured app in the Company Portal",
+ "isMAMEnabledToggleLabel": "Yes",
+ "lastModifiedDateTime": "Last updated Time",
+ "ldapUrl": "LDAP URL",
+ "licensingType": "Supports device context assignment",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimum operating system",
+ "modernAuth": "Modern authentication",
+ "nameHint": "Enter a name",
+ "nameLabel": "Name",
+ "nameSizeHint": "The maximum length of the name is 512 characters.",
+ "notConfigured": "Not configured",
+ "notesLabel": "Notes",
+ "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
+ "notificationType": "Notification type",
+ "oneDay": "One Day",
+ "oneMonth": "One Month",
+ "oneWeek": "One Week",
+ "outlookSMimeSettings": "Outlook S/MIME settings",
+ "ownerLabel": "Owner",
+ "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
+ "packageIdLabel": "Package Identifier",
+ "packageNameLabel": "Package name",
+ "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
+ "platformLabel": "Platform",
+ "policyDescriptionLabel": "Description",
+ "policyNameLabel": "Name",
+ "preComposedIconEnabled": "Precomposed",
+ "primarySMTPAddress": "Primary SMTP Address",
+ "privacyUrlLabel": "Privacy URL",
+ "publisherHint": "Enter a publisher name",
+ "publisherLabel": "Publisher",
+ "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
+ "require": "Require",
+ "requireBiometrics": "Require Biometrics to access app",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "At least one scope tag is required",
+ "searchAppLabel": "Select app",
+ "searchAppLinkText": "Search the App Store",
+ "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
+ "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
+ "selectAAD": "Select a Microsoft Entra attribute",
+ "selectAppFileLabel": "Select file",
+ "selectAppFileLinkText": "Select app package file",
+ "selectAppFileToUpdateLabel": "Select file to update",
+ "selectAuthMethod": "Select an authentication method",
+ "selectAuthType": "Select an authentication type",
+ "selectCatalogAppLabel": "Select app",
+ "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
+ "selectCertificate": "Select a certificate",
+ "signAllEmails": "Sign all emails",
+ "signingCertificates": "Signing certificates",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Suite Description",
+ "suiteNameLabel": "Suite Name",
+ "targetApplicationBundleIdentifier": "Target application bundle identifier",
+ "targetedPlatformsLabel": "Targeted platform",
+ "tasks": "Tasks",
+ "threeDays": "Three Days",
+ "totalLicenseCount": "Total licenses",
+ "twoWeeks": "Two Weeks",
+ "unifiedAssignmentsLabel": "Assign to:",
+ "unlimited": "Unlimited",
+ "urlHint": "Enter a valid url",
+ "useManagedBrowserHint": "Android and iOS only. Learn more",
+ "useManagedBrowserLabel": "Require a managed browser to open this link",
+ "userPrinicipalName": "User Principal Name",
+ "username": "Username",
+ "usernameAttribute": "Username attribute from Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
+ "usernamePassword": "Username and password",
+ "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
+ "webAppUrlLabel": "App URL",
+ "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
+ "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "XML Data Entered",
+ "xmlFormatInvalid": "XML policy format is invalid.",
+ "xmlTooLarge": "Input size must be less than 1 MB."
+ },
+ "CoManagementAuthority": {
+ "Confirmation": {
+ "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
+ "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
+ },
+ "Grid": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
+ "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
+ "label": "Co-management authority"
+ },
+ "Header": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
+ },
+ "Main": {
+ "title": "Co-management Authority"
+ },
+ "MessageSaved": {
+ "body": "Co-management authority policy created."
+ },
+ "Notification": {
+ "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
+ "created": "This Co-management authority policy has not been assigned to any users.",
+ "creating": "Creating Co-management authority policy",
+ "creatingMessage": "Creating {0} Co-management authority policy",
+ "deleteError": "An error occurred while deleting Co-management authority policy",
+ "deleted": "Co-management authority policy deleted.",
+ "deletedMessage": "{0} Co-management authority policy is deleted.",
+ "deleting": "Deleting Co-management Authority policy",
+ "deletingMessage": "Deleting {0} Co-management Authority policy",
+ "fetchError": "An error occurred while displaying Co-management authority policies",
+ "saved": "Co-management Authority saved.",
+ "savedMessage": "{0} Co-management Authority policy successfully saved.",
+ "saving": "Saving Co-management authority",
+ "savingMessage": "Saving {0} Co-management authority policy"
+ },
+ "Priority": {
+ "saveError": "An error occurred while saving Co-management authority priorities",
+ "saved": "Co-management authority priorities were successfully saved."
+ },
+ "ReloadNotification": {
+ "description": "Reload the Co-management authority policy to try again.",
+ "title": "Reload the Co-management authority blade"
+ },
+ "advancedProperty": "Advanced",
+ "commandLineArgs": "Client installation command line arguments.",
+ "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
+ "enterArgument": "Enter argument",
+ "installAgent": "Automatically install Configuration Manager agent.",
+ "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
+ "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
+ "pageDescription": "Co-management authority profiles",
+ "pageSetting": "Co-management authority Setting",
+ "pageTitle": "Co-management authority",
+ "settingDescription": "The co-management settings determine who owns the workloads."
+ },
+ "AzureIAMCommon": {
+ "Recommended": "Recommended",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrain",
+ "countryNameZA": "South Africa",
+ "countryNameJO": "Jordan",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Czech Republic",
+ "countryNameLT": "Lithuania",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hong Kong SAR",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Saudi Arabia",
+ "countryNamePG": "Papua New Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "India",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Romania",
+ "countryNameKZ": "Kazakhstan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Georgia",
+ "countryNameTT": "Trinidad and Tobago",
+ "countryNameMP": "Northern Mariana Islands",
+ "countryNameMV": "Maldives",
+ "countryNameFI": "Finland",
+ "countryNameNO": "Norway",
+ "countryNameEE": "Estonia",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Uzbekistan",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tajikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "France",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italy",
+ "countryNameAZ": "Azerbaijan",
+ "countryNameKG": "Kyrgyzstan",
+ "countryNameWF": "Wallis and Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falkland Islands (Islas Malvinas)",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "South Sudan",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Syria",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "Saint Vincent and the Grenadines",
+ "countryNameID": "Indonesia",
+ "countryNameRE": "Reunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "North Macedonia",
+ "countryNameTG": "Togo",
+ "countryNamePF": "French Polynesia",
+ "countryNameKY": "Cayman Islands",
+ "countryNameIO": "British Indian Ocean Territory",
+ "countryNameRU": "Russia",
+ "countryNameMA": "Morocco",
+ "countryNameAU": "Australia",
+ "countryNameBO": "Bolivia",
+ "countryNameVA": "Holy See (Vatican City State)",
+ "countryNameVG": "Virgin Islands, British",
+ "countryNameFM": "Micronesia",
+ "countryNameAQ": "Antarctica",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brazil",
+ "countryNameIS": "Iceland",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgaria",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamas, The",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macao SAR",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "American Samoa",
+ "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
+ "countryNameMF": "Saint Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "New Caledonia",
+ "countryNameAC": "Ascension Island",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladesh",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Canada",
+ "countryNameSH": "Saint Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolia",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Cameroon",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japan",
+ "countryNameCY": "Cyprus",
+ "countryNameCD": "Democratic Republic of Congo",
+ "countryNameTN": "Tunisia",
+ "countryNameTR": "Türkiye",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Sweden",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Cambodia",
+ "countryNamePL": "Poland",
+ "countryNameDZ": "Algeria",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Egypt",
+ "countryNameGF": "French Guiana",
+ "countryNameNZ": "New Zealand",
+ "countryNamePS": "Palestinian Authority",
+ "countryNameIL": "Israel",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Greece",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauritania",
+ "countryNameVI": "Virgin Islands, U.S.",
+ "countryNameGQ": "Equatorial Guinea",
+ "countryNameMX": "Mexico",
+ "countryNameDJ": "Djibouti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "China",
+ "countryNameMZ": "Mozambique",
+ "countryNameBV": "Bouvet Island",
+ "countryNameNF": "Norfolk Island",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "South Georgia and the South Sandwich Islands",
+ "countryNameRS": "Serbia",
+ "countryNameCC": "Cocos (Keeling) Islands",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Germany",
+ "countryNameCG": "Republic of Congo",
+ "countryNameKW": "Kuwait",
+ "countryNameMH": "Marshall Islands",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarus",
+ "countryNameMY": "Malaysia",
+ "countryNameST": "São Tomé and Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Chad",
+ "countryNameCX": "Christmas Island",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bissau",
+ "countryNameUA": "Ukraine",
+ "countryNameCU": "Cuba",
+ "countryNameCO": "Colombia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Croatia",
+ "countryNameSC": "Seychelles",
+ "countryNameNL": "Netherlands",
+ "countryNameUM": "US Minor Outlying Islands",
+ "countryNameIM": "Isle of Man",
+ "countryNameFJ": "Fiji",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "United Kingdom",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovenia",
+ "countryNameAM": "Armenia",
+ "countryNameAR": "Argentina",
+ "countryNamePM": "Saint Pierre and Miquelon",
+ "countryNameTF": "French Southern and Antarctic Lands",
+ "countryNameDO": "Dominican Republic",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "Central African Republic",
+ "countryNameBE": "Belgium",
+ "countryNameKM": "Comoros",
+ "countryNameLY": "Libya",
+ "countryNameIE": "Ireland",
+ "countryNameKP": "North Korea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slovakia",
+ "countryNameTC": "Turks and Caicos Islands",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Yemen",
+ "countryNameBA": "Bosnia and Herzegovina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Iraq",
+ "countryNameSJ": "Svalbard and Jan Mayen Island",
+ "countryNameAX": "Åland Islands",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Faroe Islands",
+ "countryNameBL": "Saint Barthélemy",
+ "countryNameLB": "Lebanon",
+ "countryNameJM": "Jamaica",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Spain",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapore",
+ "countryNameAL": "Albania",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d’Ivoire",
+ "countryNameTW": "Taiwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cook Islands",
+ "countryNameTH": "Thailand",
+ "countryNameHM": "Heard Island and McDonald Islands",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "United States",
+ "countryNameAT": "Austria",
+ "countryNameKR": "Korea, Republic of",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Denmark",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Ethiopia",
+ "countryNameMG": "Madagascar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxembourg",
+ "countryNameQA": "Qatar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Solomon Islands",
+ "countryNameAE": "United Arab Emirates",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua and Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Hungary",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Switzerland",
+ "countryNamePN": "Pitcairn Islands",
+ "countryNameGL": "Greenland",
+ "countryNamePH": "Philippines",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts and Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Latvia",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Author",
+ "template": "Template name"
+ },
+ "Row": {
+ "ariaLabel": "row {0} of {1} column {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Start from scratch and select settings you want from the library of available settings",
+ "title": "Settings catalog"
+ },
+ "Templates": {
+ "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
+ "title": "Templates"
+ },
+ "noData": "No policy templates found"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Endpoint detection and response"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "App and browser isolation",
+ "aSRApplicationControl": "Application control",
+ "aSRAttackSurfaceReduction": "Attack surface reduction rules",
+ "aSRDeviceControl": "Device control",
+ "aSRExploitProtection": "Exploit protection",
+ "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
+ "aVExclusions": "Microsoft Defender Antivirus exclusions",
+ "antivirus": "Microsoft Defender Antivirus",
+ "cloudPC": "Windows 365 Security Baseline",
+ "default": "Endpoint Security",
+ "defenderTest": "Microsoft Defender for Endpoint demo",
+ "diskEncryption": "BitLocker",
+ "eDR": "Endpoint detection and response",
+ "edgeSecurityBaseline": "Microsoft Edge baseline",
+ "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
+ "editionUpgradeConfiguration": "Edition upgrade and mode switch",
+ "firewall": "Windows Firewall",
+ "firewallRules": "Windows Firewall rules",
+ "identityProtection": "Account protection",
+ "identityProtectionPreview": "Account protection (preview)",
+ "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
+ "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
+ "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
+ "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS firewall",
+ "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
+ "office365Baseline": "Microsoft Office O365 baseline",
+ "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
+ "securityBaselines": "Security Baselines",
+ "test": "Test Template",
+ "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
+ "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
+ "windowsSecurityExperience": "Windows Security experience"
+ },
+ "Firewall": {
+ "mDE": "Windows Firewall"
+ },
+ "FirewallRules": {
+ "mDE": "Windows Firewall Rules"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Account Protection",
+ "administrativeTemplates": "Administrative Templates",
+ "androidCompliancePolicy": "Android compliance policy",
+ "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
+ "applicationControl": "App Control for Business",
+ "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
+ "bitlocker": "BitLocker",
+ "custom": "Custom",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedPersonalIdentityVerificationCredential": "Derived credential",
+ "deviceControl": "Device Control",
+ "deviceFeatures": "Device features",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Device Lock",
+ "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
+ "deviceRestrictions": "Device restrictions",
+ "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
+ "domainJoinPreview": "Domain Join",
+ "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
+ "education": "Education",
+ "email": "Email",
+ "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
+ "endpointProtection": "Endpoint protection",
+ "expeditedCheckin": "Mobile device management configuration",
+ "exploitProtection": "Exploit Protection",
+ "extensions": "Extensions",
+ "hardwareConfigurations": "BIOS Configurations and other settings",
+ "identityProtection": "Identity protection",
+ "iosCompliancePolicy": "iOS compliance policy",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Local user group membership",
+ "macCompliancePolicy": "Mac compliance policy",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
+ "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
+ "microsoftDefenderFirewallRules": "Windows Firewall Rules",
+ "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
+ "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
+ "mxProfileZebraOnly": "MX profile (Zebra only)",
+ "networkBoundary": "Network boundary",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Override Group Policy",
+ "pkcsCertificate": "PKCS certificate",
+ "pkcsImportedCertificate": "PKCS imported certificate",
+ "preferenceFile": "Preference file",
+ "presets": "Presets",
+ "scepCertificate": "SCEP certificate",
+ "secureAssessmentEducation": "Secure assessment (Education)",
+ "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
+ "settingsCatalog": "Settings Catalog",
+ "sharedMultiUserDevice": "Shared multi-user device",
+ "softwareUpdates": "Software Updates",
+ "trustedCertificate": "Trusted certificate",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi import",
+ "windows10CompliancePolicy": "Windows 10/11 compliance policy",
+ "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
+ "windows10XScep": "SCEP certificate - TEST",
+ "windows10XTrustedCertificate": "Trusted certificate - TEST",
+ "windows10XVPN": "VPN - TEST",
+ "windows10XWifi": "WIFI - TEST",
+ "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
+ "windows365SecurityBaseline": "Windows 365 Security Baseline",
+ "windows8CompliancePolicy": "Windows 8 compliance policy",
+ "windowsHealthMonitoring": "Windows health monitoring",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
+ "windowsUpdateforBusiness": "Windows Update for Business",
+ "wiredNetwork": "Wired network",
+ "workProfile": "Personally-owned work profile"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Make update available gradually",
+ "immediateStart": "Make update available as soon as possible",
+ "startDateOnly": "Make update available on a specific date"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Auto deny",
+ "autoGrant": "Auto grant",
+ "prompt": "Prompt"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Location access (coarse)",
+ "accessFineLocation": "Location access (fine)",
+ "addVoicemail": "Add voicemail",
+ "bodySensors": "Allow body sensor data",
+ "bodySensorsBackground": "Allow background body sensor data",
+ "callPhone": "Make phone calls",
+ "camera": "Camera",
+ "getAccounts": "Get accounts",
+ "nearbyDevices": "Nearby Devices",
+ "nearbyWifiDevices": "Nearby Wifi Devices",
+ "postNotifications": "Post notifications",
+ "processOutgoingCalls": "Process outgoing calls",
+ "readCalendar": "Calendar (read)",
+ "readCallLog": "Call log (read)",
+ "readContacts": "Contacts (read)",
+ "readExternalStorage": "External storage (read)",
+ "readMediaAudio": "Media Audio (read)",
+ "readMediaImages": "Media Images (read)",
+ "readMediaVideo": "Media Video (read)",
+ "readPhoneState": "Phone state (read)",
+ "readSMS": "SMS (read)",
+ "receiveMMS": "MMS (receive)",
+ "receiveSMS": "SMS (receive)",
+ "receiveWAPPush": "WAP push messages (receive)",
+ "recordAudio": "Record audio",
+ "sendSMS": "SMS (send)",
+ "useSIP": "Use SIP service",
+ "writeCalendar": "Calendar (write)",
+ "writeCallLog": "Call log (write)",
+ "writeContacts": "Contacts (write)",
+ "writeExternalStorage": "External storage (write)"
+ },
+ "RemoveDialog": {
+ "description": "Are you sure you want to remove the permission?",
+ "title": "Remove"
+ },
+ "TableHeader": {
+ "permission": "Permission",
+ "permissionGroup": "Permission group",
+ "permissionName": "Permission name",
+ "permissionState": "Permission state"
+ },
+ "addButtonLabel": "+Add",
+ "addPermissionTableDescription": "Specify permissions you want to override. If they are not chosen/specified explicitly, then the default behavior will apply.",
+ "addPermissionsTitle": "Add permissions",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Learn more about Android runtime permissions",
+ "permissionTableDescription": "Permissions granted here will override the “Default app permissions” policy for the selected apps.",
+ "permissionsTitle": "Permissions"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search as default",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype for Business",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "The file or folder as the selected requirement.",
+ "pathToolTip": "The complete path of the file or folder to detect.",
+ "property": "Property",
+ "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "GridColumns": {
+ "pathOrScript": "Path/Script",
+ "type": "Type"
+ },
+ "Registry": {
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the comparison.",
+ "registryRequirement": "Registry key requirement",
+ "registryRequirementTooltip": "Select the registry key requirement comparison.",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the required registry value."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "File",
+ "registry": "Registry",
+ "script": "Script"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Boolean",
+ "dateTime": "Date and Time",
+ "float": "Floating Point",
+ "integer": "Integer",
+ "string": "String",
+ "version": "Version"
+ },
+ "duplicateName": "Script name {0} has already been used. Please enter a different name.",
+ "enforceSignatureCheck": "Enforce script signature check",
+ "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
+ "loggedOnCredentials": "Run this script using the logged on credentials",
+ "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
+ "operatorTooltip": "Select the operator for the requirement comparison.",
+ "requirementMethod": "Select output data type",
+ "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
+ "scriptName": "Script name",
+ "value": "Value",
+ "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "bladeTitle": "Add a Requirement rule",
+ "createRequirementHeader": "Create a requirement.",
+ "header": "Configure additional requirement rules",
+ "label": "Additional requirement rules",
+ "noRequirementsSelectedPlaceholder": "No requirements are specified.",
+ "requirementType": "Requirement type",
+ "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
+ },
+ "architectures": "Operating system architecture",
+ "architecturesTooltip": "Choose the architectures needed to install the app.",
+ "bladeTitle": "Requirements",
+ "diskSpace": "Disk space required (MB)",
+ "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
+ "header": "Specify the requirements that devices must meet before the app is installed:",
+ "maximumTextFieldValue": "The value must be at most {0}.",
+ "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
+ "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
+ "minimumLogicalProcessors": "Minimum number of logical processors required",
+ "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
+ "minimumOperatingSystem": "Minimum operating system",
+ "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
+ "minumumTextFieldValue": "The value must be at least {0}.",
+ "physicalMemory": "Physical memory required (MB)",
+ "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
+ "selectorLabel": "Requirements",
+ "validNumber": "Please enter a valid number."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filter",
+ "assignmentFilterTypeColumnHeader": "Filter mode",
+ "assignmentToast": "End user notifications",
+ "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
+ "autoUpdate": "Auto-update",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
+ "groupTableHeader": "Group",
+ "installContextLabel": "Install Context",
+ "isRemovable": "Install as removable",
+ "licenseTypeLabel": "License type",
+ "modeTableHeader": "Group mode",
+ "policySet": "Policy Set",
+ "preventAutoAppUpdate": "Prevent automatic app updates",
+ "preventManagedAppBackup": "Prevent iCloud app backup",
+ "restartGracePeriodHeader": "Restart grace period",
+ "startTimeColumnLabel": "Availability",
+ "tracks": "Tracks",
+ "uninstallOnRemoval": "Uninstall on device removal",
+ "updateMode": "Update Priority",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD web app",
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office Suite",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeAddIn": "Office add-in",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "sharePointApp": "SharePoint app",
+ "teamsApp": "Teams app",
+ "webApp": "Web link",
+ "win32CatalogApp": "Windows catalog app (Win32)",
+ "winGetPublicApp": "Windows Package Manager Community Repository",
+ "winGetStoreApp": "Microsoft Store app (new)",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "AssignmentToast": {
+ "hideAll": "Hide all toast notifications",
+ "showAll": "Show all toast notifications",
+ "showReboot": "Show toast notifications for computer restarts"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Yes",
+ "notConfigured": "No"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "App install may force a device restart",
+ "basedOnReturnCode": "Determine behavior based on return codes",
+ "force": "Intune will force a mandatory device restart",
+ "suppress": "No specific action"
+ },
+ "FilterType": {
+ "exclude": "Exclude",
+ "include": "Include",
+ "none": "None"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "notApplicable": "Not applicable",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "SettingType": {
+ "assignmentType": "Assignment type",
+ "deviceLicensing": "License type",
+ "installContext": "Uninstall on device removal",
+ "toastSettings": "End user notifications",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Default",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Failed",
+ "hardReboot": "Hard reboot",
+ "retry": "Retry",
+ "softReboot": "Soft reboot",
+ "success": "Success"
+ },
+ "Columns": {
+ "codeType": "Code type",
+ "returnCode": "Return code"
+ },
+ "bladeTitle": "Return codes",
+ "gridAriaLabel": "Return codes",
+ "header": "Specify return codes to indicate post-installation behavior:",
+ "onAddAnnounceMessage": "Return code added item {0} of {1}",
+ "onDeleteSuccess": "Return code {0} deleted successfully",
+ "returnCodeAlreadyUsedValidation": "Return code is already used.",
+ "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
+ "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
+ "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
+ "selectorLabel": "Return codes"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone and iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Add network boundary",
+ "addNetworkBoundaryButton": "Add network boundary...",
+ "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
+ "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
+ "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
+ "boundaryType": "Boundary type",
+ "cloudResources": "Cloud resources",
+ "corporateIdentity": "Corporate identity",
+ "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
+ "editNetworkBoundary": "Edit network boundary",
+ "enrollmentState": "Enrollment state",
+ "iPv4Ranges": "IPv4 ranges",
+ "iPv6Ranges": "IPv6 ranges",
+ "internalProxyServers": "Internal proxy servers",
+ "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
+ "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
+ "mdmDiscoveryUrl": "MDM discovery URL",
+ "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
+ "minimumPinLength": "Set the minimum number of characters required for the PIN",
+ "name": "Name",
+ "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
+ "networkBoundary": "Network boundary",
+ "networkDomainNames": "Network domains",
+ "neutralResources": "Neutral resources",
+ "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
+ "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
+ "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
+ "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
+ "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
+ "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
+ "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
+ "protectedDomainNames": "Protected domains",
+ "proxyServers": "Proxy servers",
+ "requireAppPin": "Disable app PIN when device PIN is managed",
+ "requiredSettings": "Required settings",
+ "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
+ "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
+ "revokeOnUnenroll": "Revoke encryption keys on unenroll",
+ "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
+ "showWipIcon": "Show the enterprise data protection icon",
+ "type": "Type",
+ "useRmsForWip": "Use Azure RMS for WIP",
+ "value": "Value",
+ "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
+ "wipProtectionMode": "Windows Information Protection mode",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabic",
+ "bulgarian": "Bulgarian",
+ "chineseSimplified": "Chinese (Simplified)",
+ "chineseTraditional": "Chinese (Traditional)",
+ "croatian": "Croatian",
+ "czech": "Czech",
+ "danish": "Danish",
+ "dutch": "Dutch",
+ "englishUK": "English (United Kingdom)",
+ "englishUS": "English (United States)",
+ "estonian": "Estonian",
+ "finnish": "Finnish",
+ "frenchCanada": "French (Canada)",
+ "frenchFrance": "French (France)",
+ "german": "German",
+ "greek": "Greek",
+ "hebrew": "Hebrew",
+ "hungarian": "Hungarian",
+ "italian": "Italian",
+ "japanese": "Japanese",
+ "korean": "Korean",
+ "latvian": "Latvian",
+ "lithuanian": "Lithuanian",
+ "norwegian": "Norwegian, Bokmål",
+ "polish": "Polish",
+ "portugueseBrazil": "Portuguese (Brazil)",
+ "portuguesePortugal": "Portuguese (Portugal)",
+ "romanian": "Romanian",
+ "russian": "Russian",
+ "serbian": "Serbian",
+ "slovak": "Slovak",
+ "slovenian": "Slovenian",
+ "spanishMexico": "Spanish (Mexico)",
+ "spanishSpain": "Spanish (Spain)",
+ "swedish": "Swedish",
+ "thai": "Thailand",
+ "turkish": "Turkish",
+ "ukrainian": "Ukrainian"
+ },
+ "Summary": {
+ "placeholder": "Select a notification message from the left to preview contents."
+ },
+ "companyContact": "Show contact information",
+ "companyLogo": "Show company logo",
+ "companyName": "Show company name",
+ "createEditDescription": "Create or edit notification message templates.",
+ "createMessage": "Create message",
+ "deviceDetails": "Show device details",
+ "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
+ "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
+ "editMessage": "Edit message",
+ "email": "email",
+ "emailFooterTitle": "Email Footer",
+ "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
+ "emailHeaderTitle": "Email Header",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Configure Customization settings",
+ "formSubTitle": "Create or modify notification emails",
+ "headerFooterSettingsTab": "Header and footer settings",
+ "imgPreview": "Image Preview",
+ "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
+ "iwLink": "Show company portal website link",
+ "listEmpty": "No message templates.",
+ "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "listSubTitle": "List of notification message templates",
+ "listTitle": "Notification message templates",
+ "localizedNotificationMessageTemplates": "Localized notification message templates",
+ "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
+ "messageCapitalized": "Notification message template",
+ "messageLowercase": "notification message template",
+ "missingDefaultError": "Select a default template",
+ "notificationMessageTemplates": "Notification message templates",
+ "rowValidationError": "At least one message template is required",
+ "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "tenantValueText": "Tenant Value",
+ "testEmailLabel": "Send preview email",
+ "localeLabel": "Locale",
+ "isDefaultLocale": "Is Default"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Configure devices for initial provisioning.",
+ "title": "Device preparation"
+ },
+ "EnrollmentSettings": {
+ "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
+ "title": "Enrollment settings"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
+ "menuTitle": "Windows operating system recovery configuration"
+ },
+ "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
+ "coManagementAuthorityTitle": "Co-management Settings ",
+ "deploymentProfiles": "Windows Autopilot deployment profiles",
+ "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
+ "descriptionLabel": "Windows enrollment methods",
+ "enrollmentStatusPage": "Enrollment Status Page"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Select the number of bits contained in the key.",
+ "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
+ "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
+ "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
+ "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Subject alternative name",
+ "subjectNameFormat": "Subject name format",
+ "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
+ },
+ "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
+ "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
+ "configurationSettingsFormat": "Configuration settings format text",
+ "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
+ "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
+ "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
+ "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Select runtime permissions for the associated app.",
+ "policyAssociatedApp": "Select the app that this policy will be associated with.",
+ "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
+ "policyDescription": "Optionally, enter a description for this configuration policy.",
+ "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
+ "policyName": "Enter a name for this configuration policy.",
+ "policyPlatform": "Select the platform this app configuration policy will apply to.",
+ "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
+ "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
+ "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
+ "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
+ "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
+ "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
+ "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
+ "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
+ "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
+ "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
+ "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
+ "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "header": "Are you sure you want to delete this restriction?"
+ },
+ "DeviceLimit": {
+ "description": "Specify the maximum number of devices a user can enroll.",
+ "header": "Device limit restrictions",
+ "info": "Define how many devices each user can enroll."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Must be 1.0 or greater.",
+ "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
+ "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
+ "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
+ "min": "Minimum cannot be lower than {0}",
+ "minMax": "Minimum version cannot be greater than maximum version.",
+ "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
+ "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
+ },
+ "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
+ "blockManufacturerPlaceHolder": "Manufacturer name",
+ "blockManufacturersHeader": "Blocked manufacturers",
+ "cannotRestrict": "Restriction not supported",
+ "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
+ "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
+ "configurations": "Configure platforms",
+ "deviceManufacturer": "Device manufacturer",
+ "header": "Device type restrictions",
+ "info": "Define which platforms, versions, and management types can enroll.",
+ "manufacturer": "Manufacturer",
+ "max": "Max",
+ "maxVersion": "Maximum version",
+ "min": "Min",
+ "minVersion": "Minimum version",
+ "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
+ "personal": "Personally owned",
+ "platform": "Platform",
+ "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
+ "platformSettings": "Platform settings",
+ "platforms": "Select platforms",
+ "platformsSelected": "{0} platforms selected",
+ "type": "Type",
+ "versions": "versions",
+ "versionsRange": "Allow min/max range:",
+ "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Restriction Priorities were successfully saved."
+ },
+ "Row": {
+ "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
+ },
+ "Table": {
+ "deployed": "Deployed",
+ "name": "Name",
+ "priority": "Priority"
+ },
+ "Type": {
+ "limit": "Device limit restriction",
+ "type": "Device type restriction"
+ },
+ "allUsers": "All Users",
+ "androidRestrictions": "Android restrictions",
+ "create": "Create restriction",
+ "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
+ "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
+ "deleteTitle": "Are you sure you want to delete {0} restriction?",
+ "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
+ "edit": "Edit restriction",
+ "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
+ "iosRestrictions": "iOS restrictions",
+ "mDM": "MDM",
+ "macRestrictions": "macOS restrictions",
+ "maxVersion": "Max Version",
+ "minVersion": "Min Version",
+ "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
+ "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
+ "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
+ "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
+ "notFound": "Restriction not found. It may have already been deleted.",
+ "personallyOwned": "Personally owned devices",
+ "restriction": "Restriction",
+ "restrictionLowerCase": "restriction",
+ "restrictionType": "Restriction type",
+ "selectType": "Select restriction type",
+ "selectValidation": "Please select a platform",
+ "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
+ "typeRequired": "Restriction type is required.",
+ "winPhoneRestrictions": "Windows Phone restrictions",
+ "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
+ "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
+ "windowsRestrictions": "Windows restrictions",
+ "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 day",
+ "twoDays": "2 days",
+ "zeroDays": "0 days"
+ },
+ "SecurityTemplate": {
+ "aSR": "Attack surface reduction",
+ "accountProtection": "Account protection",
+ "allDevices": "All devices",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Antivirus Reporting (Preview)",
+ "conditionalAccess": "Conditional access",
+ "deviceCompliance": "Device compliance",
+ "diskEncryption": "Disk encryption",
+ "eDR": "Endpoint detection and response",
+ "ePM": "Endpoint Privilege Management",
+ "firewall": "Firewall",
+ "helpSupport": "Help and support",
+ "setup": "Setup",
+ "wdapt": "Microsoft Defender for Endpoint"
+ },
"OutlookAppConfig": {
"DataProtectionConfiguration": {
"header": "Data Protection configuration"
@@ -100,693 +1787,622 @@
"themesEnabledTitle": "Themes Enabled",
"themesEnabledTooltip": "Specify if the user is allowed to use a custom visual theme."
},
- "Languages": {
- "ar-aE": "Arabic (U.A.E.)",
- "ar-bH": "Arabic (Bahrain)",
- "ar-dZ": "Arabic (Algeria)",
- "ar-eG": "Arabic (Egypt)",
- "ar-iQ": "Arabic (Iraq)",
- "ar-jO": "Arabic (Jordan)",
- "ar-kW": "Arabic (Kuwait)",
- "ar-lB": "Arabic (Lebanon)",
- "ar-lY": "Arabic (Libya)",
- "ar-mA": "Arabic (Morocco)",
- "ar-oM": "Arabic (Oman)",
- "ar-qA": "Arabic (Qatar)",
- "ar-sA": "Arabic (Saudi Arabia)",
- "ar-sY": "Arabic (Syria)",
- "ar-tN": "Arabic (Tunisia)",
- "ar-yE": "Arabic (Yemen)",
- "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
- "az-latn": "Azerbaijani (Latin, Azerbaijan)",
- "bn-bD": "Bangla (Bangladesh)",
- "bn-iN": "Bangla (India)",
- "bs-cyrl": "Bosnian (Cyrillic)",
- "bs-latn": "Bosnian (Latin)",
- "zh-cN": "Chinese (PRC)",
- "zh-hK": "Chinese (Hong Kong S.A.R.)",
- "zh-mO": "Chinese (Macao S.A.R.)",
- "zh-sG": "Chinese (Singapore)",
- "zh-tW": "Chinese (Taiwan)",
- "hr-bA": "Croatian (Latin)",
- "hr-hR": "Croatian (Croatia)",
- "nl-bE": "Dutch (Belgium)",
- "nl-nL": "Dutch (Netherlands)",
- "en-aU": "English (Australia)",
- "en-bZ": "English (Belize)",
- "en-cA": "English (Canada)",
- "en-cabn": "English (Caribbean)",
- "en-iE": "English (Ireland)",
- "en-iN": "English (India)",
- "en-jM": "English (Jamaica)",
- "en-mY": "English (Malaysia)",
- "en-nZ": "English (New Zealand)",
- "en-pH": "English (Republic of the Philippines)",
- "en-sG": "English (Singapore)",
- "en-tT": "English (Trinidad and Tobago)",
- "en-uK": "English (United Kingdom)",
- "en-uS": "English (United States)",
- "en-zA": "English (South Africa)",
- "en-zW": "English (Zimbabwe)",
- "fr-bE": "French (Belgium)",
- "fr-cA": "French (Canada)",
- "fr-cH": "French (Switzerland)",
- "fr-fR": "French (France)",
- "fr-lU": "French (Luxembourg)",
- "fr-mC": "French (Monaco)",
- "de-aT": "German (Austria)",
- "de-cH": "German (Switzerland)",
- "de-dE": "German (Germany)",
- "de-lI": "German (Liechtenstein)",
- "de-lU": "German (Luxembourg)",
- "iu-cans": "Inuktitut (Syllabics, Canada)",
- "iu-latn": "Inuktitut (Latin, Canada)",
- "it-cH": "Italian (Switzerland)",
- "it-iT": "Italian (Italy)",
- "ms-bN": "Malay (Brunei Darussalam)",
- "ms-mY": "Malay (Malaysia)",
- "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
- "mn-mN": "Mongolian (Cyrillic, Mongolia)",
- "no-nB": "Norwegian, Bokmål (Norway)",
- "no-nn": "Norwegian, Nynorsk (Norway)",
- "pt-bR": "Portuguese (Brazil)",
- "pt-pT": "Portuguese (Portugal)",
- "quz-bO": "Quechua (Bolivia)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Peru)",
- "smj-nO": "Sami, Lule (Norway)",
- "smj-sE": "Sami, Lule (Sweden)",
- "se-fI": "Sami, Northern (Finland)",
- "se-nO": "Sami, Northern (Norway)",
- "se-sE": "Sami, Northern (Sweden)",
- "sma-nO": "Sami, Southern (Norway)",
- "sma-sE": "Sami, Southern (Sweden)",
- "smn": "Sami, Inari (Finland)",
- "sms": "Sami, Skolt (Finland)",
- "sr-Cyrl-bA": "Serbian (Cyrillic)",
- "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
- "sr-Latn-bA": "Serbian (Latin)",
- "sr-Latn-rS": "Serbian (Latin, Serbia)",
- "dsb": "Lower Sorbian (Germany)",
- "hsb": "Upper Sorbian (Germany)",
- "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
- "es-aR": "Spanish (Argentina)",
- "es-bO": "Spanish (Bolivia)",
- "es-cL": "Spanish (Chile)",
- "es-cO": "Spanish (Colombia)",
- "es-cR": "Spanish (Costa Rica)",
- "es-dO": "Spanish (Dominican Republic)",
- "es-eC": "Spanish (Ecuador)",
- "es-eS": "Spanish (Spain)",
- "es-gT": "Spanish (Guatemala)",
- "es-hN": "Spanish (Honduras)",
- "es-mX": "Spanish (Mexico)",
- "es-nI": "Spanish (Nicaragua)",
- "es-pA": "Spanish (Panama)",
- "es-pE": "Spanish (Peru)",
- "es-pR": "Spanish (Puerto Rico)",
- "es-pY": "Spanish (Paraguay)",
- "es-sV": "Spanish (El Salvador)",
- "es-uS": "Spanish (United States)",
- "es-uY": "Spanish (Uruguay)",
- "es-vE": "Spanish (Venezuela)",
- "sv-fI": "Swedish (Finland)",
- "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
- "uz-latn": "Uzbek (Latin, Uzbekistan)",
- "af": "Afrikaans (South Africa)",
- "sq": "Albanian (Albania)",
- "am": "Amharic (Ethiopia)",
- "hy": "Armenian (Armenia)",
- "as": "Assamese (India)",
- "ba": "Bashkir (Russia)",
- "eu": "Basque (Basque)",
- "be": "Belarusian (Belarus)",
- "br": "Breton (France)",
- "bg": "Bulgarian (Bulgaria)",
- "ca": "Catalan (Catalan)",
- "co": "Corsican (France)",
- "cs": "Czech (Czech Republic)",
- "da": "Danish (Denmark)",
- "dv": "Divehi (Maldives)",
- "et": "Estonian (Estonia)",
- "fo": "Faroese (Faroe Islands)",
- "fil": "Filipino (Philippines)",
- "fi": "Finnish (Finland)",
- "gl": "Galician (Galician)",
- "ka": "Georgian (Georgia)",
- "el": "Greek (Greece)",
- "gu": "Gujarati (India)",
- "ha": "Hausa (Latin, Nigeria)",
- "he": "Hebrew (Israel)",
- "hi": "Hindi (India)",
- "hu": "Hungarian (Hungary)",
- "is": "Icelandic (Iceland)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonesian (Indonesia)",
- "ga": "Irish (Ireland)",
- "xh": "isiXhosa (South Africa)",
- "zu": "isiZulu (South Africa)",
- "ja": "Japanese (Japan)",
- "kn": "Kannada (India)",
- "kk": "Kazakh (Kazakhstan)",
- "km": "Khmer (Cambodia)",
- "rw": "Kinyarwanda (Rwanda)",
- "sw": "Kiswahili (Kenya)",
- "kok": "Konkani (India)",
- "ko": "Korean (Korea)",
- "ky": "Kyrgyz (Kyrgyzstan)",
- "lo": "Lao (Lao P.D.R.)",
- "lv": "Latvian (Latvia)",
- "lt": "Lithuanian (Lithuania)",
- "lb": "Luxembourgish (Luxembourg)",
- "mk": "Macedonian (North Macedonia)",
- "ml": "Malayalam (India)",
- "mt": "Maltese (Malta)",
- "mi": "Maori (New Zealand)",
- "mr": "Marathi (India)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepali (Nepal)",
- "oc": "Occitan (France)",
- "or": "Odia (India)",
- "ps": "Pashto (Afghanistan)",
- "fa": "Persian",
- "pl": "Polish (Poland)",
- "pa": "Punjabi (India)",
- "ro": "Romanian (Romania)",
- "rm": "Romansh (Switzerland)",
- "ru": "Russian (Russia)",
- "sa": "Sanskrit (India)",
- "st": "Sesotho sa Leboa (South Africa)",
- "tn": "Setswana (South Africa)",
- "si": "Sinhala (Sri Lanka)",
- "sk": "Slovak (Slovakia)",
- "sl": "Slovenian (Slovenia)",
- "sv": "Swedish (Sweden)",
- "syr": "Syriac (Syria)",
- "tg": "Tajik (Cyrillic, Tajikistan)",
- "ta": "Tamil (India)",
- "tt": "Tatar (Russia)",
- "te": "Telugu (India)",
- "th": "Thai (Thailand)",
- "bo": "Tibetan (PRC)",
- "tr": "Turkish (Turkey)",
- "tk": "Turkmen (Turkmenistan)",
- "uk": "Ukrainian (Ukraine)",
- "ur": "Urdu (Islamic Republic of Pakistan)",
- "vi": "Vietnamese (Vietnam)",
- "cy": "Welsh (United Kingdom)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (PRC)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender for Endpoint",
- "androidDeviceOwnerApplications": "Applications",
- "androidDeviceOwnerPolicyMessages": "Custom support information",
- "androidForWorkPassword": "Device password",
- "appManagement": "Allow or Block apps",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Restricted Apps",
- "applicationVisibility": "Show or Hide Apps",
- "applications": "App Store",
- "applicationsAndGames": "App Store, Doc Viewing, Gaming",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Apps and experience",
- "associatedDomains": "Associated domains",
- "autonomousSingleAppMode": "Autonomous Single App Mode",
- "azureOperationalInsights": "Azure operational insights",
- "bitLocker": "Windows Encryption",
- "bootOptions": "Boot options",
- "browser": "Browser",
- "builtinApps": "Built-in apps",
- "cameras": "Cameras",
- "cellular": "Cellular",
- "cloudAndStorage": "Cloud and Storage",
- "cloudPrint": "Cloud Printer",
- "complianceEmailProfile": "Email",
- "connectedDevices": "Connected devices",
- "connectivity": "Cellular and connectivity",
- "contentCaching": "Content caching",
- "controlPanelAndSettings": "Control Panel and Settings",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Custom Compliance",
- "customConfiguration": "Custom Configuration Profile",
- "customOMASettings": "Custom OMA-URI Settings",
- "customPreferences": "Preference file",
- "dFCISecuritySettings": "Security settings",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows Firewall",
- "defenderLocalSecurityOptions": "Local device security options",
- "defenderSecurityCenter": "Microsoft Defender Security Center",
- "deliveryOptimization": "Delivery Optimization",
- "derivedCredentialAuthenticationConfiguration": "Derived credential",
- "deviceExperience": "Device experience",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Microsoft Defender Application Control",
- "deviceHealth": "Device Health",
- "devicePassword": "Device password",
- "deviceProperties": "Device Properties",
- "deviceRestrictions": "General",
- "deviceSecurity": "System security",
- "display": "Display",
- "domainJoin": "Domain Join",
- "domains": "Domains",
- "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge kiosk mode",
- "editionUpgrade": "Edition Upgrade",
- "education": "Education",
- "educationDeviceCerts": "Device certificates",
- "educationStudentCerts": "Student certificates",
- "educationTakeATest": "Take a Test",
- "educationTeacherCerts": "Teacher certificates",
- "emailProfile": "Email",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Single sign-on app extension",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Games",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Health monitoring",
- "homeScreenLayout": "Home Screen Layout",
- "iOSWallpaper": "Wallpaper",
- "importedPFX": "PKCS Imported Certificate",
- "iosDefenderAtp": "Microsoft Defender for Endpoint",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Kernel extensions",
- "keyboardAndDictionary": "Keyboard and dictionary",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Dedicated devices",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Kiosk web browser",
- "lockScreenMessage": "Lock Screen Message",
- "lockedScreenExperience": "Locked Screen Experience",
- "logging": "Reporting and Telemetry",
- "loginItems": "Login items",
- "loginWindow": "Login window",
- "macDefenderAtp": "Microsoft Defender for Endpoint",
- "maintenance": "Maintenance",
- "malware": "Malware",
- "messaging": "Messaging",
- "microphonesAndSpeakers": "Microphones and speakers",
- "networkBoundary": "Network boundary",
- "networkProxy": "Network proxy",
- "notifications": "App Notifications",
- "pKCS": "PKCS Certificate",
- "password": "Password",
- "personalProfile": "Personal profile",
- "personalization": "Personalization",
- "policyOverride": "Override Group Policy",
- "ports": "Ports",
- "powerSettings": "Power Settings",
- "printer": "Printer",
- "privacy": "Privacy",
- "privacyPerApp": "Per-app privacy exceptions",
- "privacyPreferences": "Privacy preferences",
- "projection": "Projection",
- "radios": "Radios",
- "sCCMCompliance": "Configuration Manager Compliance",
- "sCEP": "SCEP Certificate",
- "sCEPProperties": "SCEP Certificate",
- "sMode": "Mode switch (Windows Insider only)",
- "safari": "Safari",
- "search": "Search",
- "session": "Session",
- "sharedDevice": "Shared iPad",
- "sharedPCAccountManager": "Shared multi-user device",
- "singleSignOn": "Single sign-on",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Settings",
- "start": "Start",
- "systemExtensions": "System extensions",
- "systemSecurity": "System Security",
- "trustedCert": "Trusted Certificate",
- "uEFIAccess": "UEFI access",
- "updates": "Updates",
- "userRights": "User Rights",
- "usersAndAccounts": "Users and Accounts",
- "vPN": "Base VPN",
- "vPNApps": "Automatic VPN",
- "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
- "vPNConditionalAccess": "Conditional Access",
- "vPNConnectivity": "Connectivity",
- "vPNDNSTriggers": "DNS Settings",
- "vPNIKEv2": "IKEv2 settings",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Split Tunneling",
- "vPNTrustedNetwork": "Trusted Network Detection",
- "wakeSettings": "Wake settings",
- "webContentFilter": "Web Content Filter",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender for Endpoint",
- "windowsDefenderATP": "Microsoft Defender for Endpoint",
- "windowsHelloForBusiness": "Windows Hello for Business",
- "windowsSpotlight": "Windows Spotlight",
- "wiredNetwork": "Wired network",
- "wireless": "Wireless",
- "wirelessProjection": "Wireless projection",
- "workProfile": "Work profile settings",
- "workProfilePassword": "Work profile password",
- "xboxServices": "Xbox services",
- "zebraMx": "MX profile (Zebra only)",
- "complianceActionsLabel": "Actions for noncompliance"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Description"
- },
- "FeatureDeploymentSettings": {
- "header": "Feature deployment settings"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "This feature cannot downgrade a device.",
- "label": "Feature update to deploy"
- },
- "GradualRolloutEndDate": {
- "label": "Final group availability"
- },
- "GradualRolloutInterval": {
- "label": "Days between groups"
- },
- "GradualRolloutStartDate": {
- "label": "First group availability"
- },
- "Name": {
- "label": "Name"
- },
- "OptionalUpdate": {
- "label": "Required or optional update"
- },
- "RolloutOptions": {
- "label": "Rollout options"
- },
- "RolloutSettings": {
- "header": "When would you like to make the update available in Windows Update?"
- },
- "ScopeSettings": {
- "header": "Configure scope tags for this policy."
- },
- "StartDateOnlyStartDate": {
- "label": "First available date"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Disabled",
- "enabled": "Enabled",
- "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
- "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
- "notApplicable": "Not Applicable",
- "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
- },
- "bladeTitle": "Feature update deployments",
- "deploymentSettingsTitle": "Deployment settings",
- "loadError": "Loading failed!",
- "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
- },
- "Notifications": {
- "deploymentSaved": "\"{0}\" has been saved.",
- "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
- },
- "TabName": {
- "deploymentSettings": "Deployment settings",
- "groupAssignmentSettings": "Assignments",
- "scopeSettings": "Scope tags"
- },
- "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
- "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
- "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
- "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
- "profileNameWarning": "Name should be less than 64 characters",
- "specificLicensingRequired": "Some selected capabilities require specific licensing."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Allow the use of lowercase letters in PIN",
- "notAllow": "Do not allow the use of lowercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Allow the use of special characters in PIN",
- "notAllow": "Do not allow the use of special characters in PIN",
- "requireAtLeastOne": "Require the use of at least one special character in PIN"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Allow the use of uppercase letters in PIN",
- "notAllow": "Do not allow the use of uppercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
- }
- },
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "App Version",
- "dependencyName": "Dependency name",
- "lastModifiedTime": "Last modified time",
- "relationship": "Relationship",
- "replaced": "Replaced",
- "searchPlaceholder": "Filter by app name",
- "status": "Status details",
- "statusDetails": "Status",
- "supersedenceName": "Supersedence name"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Child dependency",
- "indirectSupersedence": "Not directly related",
- "supersedenceAncestors": "Superseding",
- "supersedenceDescendants": "Superseded"
- },
- "SupersededReplaced": {
- "no": "No",
- "yes": "Yes"
- },
- "Tabs": {
- "chart": "Chart",
- "dependency": "Dependency",
- "label": "View: ",
- "supersedence": "Supersedence",
- "table": "Table"
- },
- "dependencyGraphAriaLabel": "App dependency chart",
- "supersedenceGraphAriaLabel": "App supersedence chart"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Please select a discovery script",
- "scriptFileLabel": "Select your discovery script"
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
+ "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
+ "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
+ "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
+ "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
+ "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
+ "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
+ "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
+ "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
+ "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
+ "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
+ "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
+ "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
+ "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
+ "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
+ "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
+ "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
+ "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
+ "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
+ "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
+ "apps": "apps",
+ "appsListName": "Application list",
+ "blockingApps": "Blocking apps",
+ "managedApps": "Managed apps",
+ "noApps": "No applications",
+ "noAppsError": "Error retrieving applications",
+ "selectApps": "Select apps",
+ "selectedAppsCount": "{0} apps selected (100 max)",
+ "useSelectedAppsAll": "All",
+ "useSelectedAppsSelected": "Selected",
+ "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
},
- "PremiumBanner": {
- "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
- "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Script",
- "placeholder": "Click to select",
- "searchboxPlaceholder": "Search by script name",
- "title": "Select a discovery script"
+ "Header": {
+ "application": "Application",
+ "publisher": "Publisher",
+ "version": "Version"
},
- "SummaryGrid": {
- "ariaLabel": "Custom compliance rules summary"
+ "SearchBox": {
+ "ariaLabel": "Search apps",
+ "placeHolder": "Search by name or publisher"
+ },
+ "allowToUseToggle": "Allow users to use device if installation error occurs",
+ "blockToggle": "Block device use until all apps and profiles are installed",
+ "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
+ "collectLogToggle": "Turn on log collection and diagnostics page for end users",
+ "create": "Create Profile",
+ "customMessageTextBox": "Error message",
+ "customMessageToggle": "Show custom message when time limit or error occurs",
+ "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
+ "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
+ "progressToggle": "Show app and profile configuration progress",
+ "resetToggle": "Allow users to reset device if installation error occurs",
+ "timeout": "Show an error when installation takes longer than specified number of minutes"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Property",
+ "rule": "Rule",
+ "ruleDetails": "Rule Details",
+ "value": "Value"
},
- "UploadFile": {
- "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
- "noFileSelectedError": "Please select a json file",
- "parseFileSelectedError": "The json file is invalid"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filter",
- "noFilters": "None"
- },
- "Platform": {
- "all": "All",
- "android": "Android device administrator",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android enterprise",
- "common": "Common",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS and Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "windows": "Windows",
- "windows10": "Windows 10 and later",
- "windows10CM": "Windows 10 and later (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 and later",
- "windows8And10": "Windows 8 and 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 and later",
- "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows PC"
- },
- "AppInformationTab": {
- "Info": {
- "AppStoreUrl": {
- "android": "Enter the link to the app listing in Google Play store. For example:",
- "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
- "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
- "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
- "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
- "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
- "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ "assignIf": "Assign profile if",
+ "deleteWarning": "This will delete the selected Applicability Rule",
+ "dontAssignIf": "Don't assign profile if",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "and {0} more",
+ "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
+ "maxText": "Max",
+ "minText": "Min",
+ "noActionRow": "No Applicability Rules Specified",
+ "oSVersion": "e.g. 1.2.3.4",
+ "toText": "to",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "OS edition",
+ "windows10OsVersion": "OS version",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Allow user to change setting",
+ "tooltip": "Specify if the user is allowed to change the setting."
+ },
+ "AllowWorkAccounts": {
+ "title": "Allow only work or school accounts",
+ "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
},
- "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
- "applicableDeviceType": "Select the device types that can install this app.",
- "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
- "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
- "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
- "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
- "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
- "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
- "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
- "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
- "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
- "learnMore": "Learn more",
- "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
- "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
- "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
- "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
- "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
- "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
- "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
- "packageId": "The app Package Identifier is the unique value that identifies the app.",
- "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
- "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
- "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
- "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
- "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
- "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
- "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
- "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
- "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
- "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
- },
- "descriptionPreview": "Preview",
- "descriptionRequired": "Description is required.",
- "editDescription": "Edit Description",
- "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
- "name": "App information",
- "nameForOfficeSuitApp": "App suite information"
- },
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ "BlockExternalImages": {
+ "title": "Block external images",
+ "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
+ },
+ "ConfigureEmail": {
+ "title": "Configure email account settings"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
+ "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
+ },
+ "title": "Default app signature"
+ },
+ "OfficeFeedReplies": {
+ "title": "Discover Feed",
+ "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
+ },
+ "OrganizeMailByThread": {
+ "title": "Organize mail by thread",
+ "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
+ },
+ "PlayMyEmails": {
+ "title": "Play My Emails",
+ "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
+ },
+ "SuggestedReplies": {
+ "title": "Suggested replies",
+ "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
+ },
+ "SyncCalendars": {
+ "title": "Sync Calendars",
+ "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
+ },
+ "TextPredictions": {
+ "title": "Text Predictions",
+ "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
},
- "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
- "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
- "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
- "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
- "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
- "appSharingToLevel3": "{0}: Allow sending org data to any app",
- "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
- "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
- "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
- "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
- "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
- "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
- "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
- "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
- "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
- "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
- "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
- "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
- "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
- "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
- "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
- "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
- "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
- "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
- "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
- "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
- "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
- "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
- "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
- "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
- "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
- "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
- "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
- "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
- "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ "ThemesEnabled": {
+ "title": "Themes enabled",
+ "tooltip": "Specify if the user is allowed to use a custom visual theme."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS devices"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Admin contacts",
+ "appPackaging": "App packaging",
+ "autopatchGroups": "Autopatch groups",
+ "devices": "Devices",
+ "featureEnablement": "Feature activate",
+ "feedback": "Feedback",
+ "gettingStarted": "Getting started",
+ "messages": "Messages",
+ "onlineResources": "Online resources",
+ "policyHealth": "Policy health",
+ "policyHealthPreview": "Policy health (preview)",
+ "releaseManagement": "Release management",
+ "serviceRequests": "Service requests",
+ "settings": "Settings",
+ "supportRequests": "Support requests",
+ "tenantEnrollment": "Tenant enrollment",
+ "tenantManagement": "Tenant management"
+ },
+ "actions": "Actions for Non-Compliance",
+ "advancedExchangeSettings": "Exchange online settings",
+ "advancedThreatProtection": "Microsoft Defender for Endpoint",
+ "allApps": "All apps",
+ "allDevices": "All devices",
+ "androidFotaDeployments": "Android FOTA deployments",
+ "appBundles": "App Bundles",
+ "appCategories": "App categories",
+ "appConfigPolicies": "App configuration policies",
+ "appConfigurationStatus": "App Configuration Status",
+ "appInstallStatus": "App install status",
+ "appLicences": "App licenses",
+ "appProtectionPolicies": "App protection policies",
+ "appProtectionStatus": "App Protection status",
+ "appSelectiveWipe": "App selective wipe",
+ "appleVppTokens": "Apple VPP Tokens",
+ "apps": "Apps",
+ "assign": "Assignments",
+ "assignedPermissions": "Assigned permissions",
+ "assignedRoles": "Assigned roles",
+ "autopilotDeploymentReport": "Autopilot deployments (preview)",
+ "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
+ "brandingAndCustomization": "Customization",
+ "cartProfiles": "Cart profiles",
+ "certificateConnectors": "Certificate connectors",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Cloud attached devices (preview)",
+ "cloudPcActions": "Cloud PC actions (preview)",
+ "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
+ "compliancePolicies": "Compliance policies",
+ "complianceScriptManagement": "Scripts",
+ "complianceScriptManagementPreview": "Scripts (preview)",
+ "complianceSettings": "Compliance policy settings",
+ "conditionStatements": "Condition statements",
+ "conditions": "Locations",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Configuration profiles",
+ "configurationScripts": "Configuration Scripts",
+ "connectorsAndTokens": "Connectors and tokens",
+ "corporateDeviceIdentifiers": "Corporate device identifiers",
+ "customAttributes": "Custom attributes",
+ "customAttributesMacOS": "Custom attributes for macOS",
+ "customNotifications": "Custom notifications",
+ "deploymentSettings": "Deployment settings",
+ "derivedCredentials": "Derived Credentials",
+ "deviceActions": "Device actions",
+ "deviceCategories": "Device categories",
+ "deviceCleanUp": "Device clean-up rules",
+ "deviceEnrollmentManagers": "Device enrollment managers",
+ "deviceExecutionStatus": "Device status",
+ "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
+ "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
+ "devices": "Devices",
+ "discoveredApps": "Discovered apps",
+ "edgePolicies": "Policies for Microsoft Edge",
+ "embeddedSIM": "eSIM cellular profiles (preview)",
+ "enrollDevices": "Enroll devices",
+ "enrollmentFailures": "Enrollment failures",
+ "enrollmentNotifications": "Enrollment notifications (preview)",
+ "enrollmentRestrictions": "Enrollment restrictions",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange service connectors",
+ "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
+ "failuresForDriverUpdates": "Windows Driver update failures",
+ "failuresForFeatureUpdates": "Feature update failures",
+ "failuresForQualityUpdates": "Windows Expedited update failures",
+ "featureFlighting": "Feature flighting",
+ "featureUpdateDeployments": "Feature updates for Windows 10 and later",
+ "flighting": "Flighting",
+ "fotaUpdate": "Firmware over-the-air update",
+ "groupPolicy": "Administrative Templates",
+ "groupPolicyAnalytics": "Group policy analytics",
+ "helpSupport": "Help and support",
+ "helpSupportReplacement": "Help and support ({0})",
+ "iOSAppProvisioning": "iOS app provisioning profiles",
+ "incompleteUserEnrollments": "Incomplete user enrollments",
+ "iosUpdates": "iOS/iPadOS updates",
+ "legacyPcManagement": "Legacy PC management",
+ "macOSSoftwareUpdate": "macOS updates",
+ "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
+ "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
+ "macOSSoftwareUpdateStateSummaries": "updates",
+ "managedGooglePlay": "Managed Google Play",
+ "msfb": "Microsoft Store for Business",
+ "myPermissions": "My permissions",
+ "notifications": "Notifications",
+ "officeApps": "Office apps",
+ "officeProPlusPolicies": "Policies for Office apps",
+ "onPremise": "On Premise",
+ "onPremisesConnector": "Exchange ActiveSync on-premises connector",
+ "onPremisesDeviceAccess": "Exchange ActiveSync devices",
+ "onPremisesManageAccess": "Exchange on-premises access",
+ "outOfDateIosDevices": "Installation failures for iOS devices",
+ "overview": "Overview",
+ "partnerDeviceManagement": "Partner device management",
+ "perUpdateRingDeploymentState": "Per update ring deployment state",
+ "permissions": "Permissions",
+ "platformApps": "{0} apps",
+ "platformDevices": "{0} devices",
+ "platformEnrollment": "{0} enrollment",
+ "policies": "Policies",
+ "profiles": "Profiles",
+ "properties": "Properties",
+ "reports": "Reports",
+ "retireNoncompliantDevices": "Retire noncompliant devices",
+ "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
+ "role": "Role",
+ "scriptManagement": "Scripts",
+ "securityBaselines": "Security baselines",
+ "serviceToServiceConnector": "Exchange online connector",
+ "servicenowConnector": "ServiceNow connector",
+ "shellScripts": "Shell scripts",
+ "teamViewerConnector": "TeamViewer connector",
+ "telecomeExpenseManagement": "Telecom expense management",
+ "tenantAdmin": "Tenant admin",
+ "tenantAdministration": "Tenant administration",
+ "termsAndConditions": "Terms and conditions",
+ "titles": "Titles",
+ "troubleshoot": "Troubleshoot",
+ "troubleshootSupport": "Troubleshooting + support",
+ "user": "User",
+ "userExecutionStatus": "User status",
+ "wdacSupplementalPolicies": "S mode supplemental policies",
+ "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
+ "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
+ "win32CatalogUpdateAppPreviewTitle": "Enterprise App Catalog apps with updates (preview)",
+ "win32CatalogUpdateAppTitle": "Enterprise App Catalog apps with updates",
+ "windows10DriverUpdate": "Driver updates for Windows 10 and later",
+ "windows10QualityUpdate": "Quality updates for Windows 10 and later",
+ "windows10UpdateRings": "Update rings for Windows 10 and later",
+ "windows10XPolicyFailures": "Windows 10X policy failures",
+ "windows365PartnerConnector": "Windows 365 partner connectors",
+ "windowsDiagnosticData": "Windows data",
+ "windowsEnterpriseCertificate": "Windows enterprise certificate",
+ "windowsManagement": "Scripts",
+ "windowsSideLoadingKeys": "Windows side loading keys",
+ "windowsSymantecCertificate": "Windows DigiCert certificate",
+ "windowsThreatReport": "Threat agent status"
+ },
+ "TAPSettings": {
+ "AllowedDataIngestionLocations": {
+ "label": "Allow users to open data from selected services",
+ "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
+ },
+ "AndroidBackup": {
+ "label": "Backup org data to Android backup services",
+ "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ },
+ "AndroidBiometricAuthentication": {
+ "label": "Biometrics instead of PIN for access",
+ "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
+ },
+ "AndroidFingerprint": {
+ "label": "Fingerprint instead of PIN for access (Android 6.0+)",
+ "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
+ },
+ "AndroidOverrideFingerprint": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "AppPIN": {
+ "label": "App PIN when device PIN is set",
+ "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
+ },
+ "BlockDataIngestionIntoOrganizationDocuments": {
+ "label": "Open data into Org documents",
+ "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
+ "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
+ "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
+ "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
+ },
+ "ConnectToVpnOnLaunch": {
+ "label": "Start Microsoft Tunnel connection on app-launch",
+ "tooltip": "Allow connection to VPN when app is launch"
+ },
+ "CredentialsForAccess": {
+ "label": "Work or school account credentials for access",
+ "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
+ },
+ "CustomBrowserDisplayName": {
+ "label": "Unmanaged Browser Name",
+ "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
+ },
+ "CustomBrowserPackageId": {
+ "label": "Unmanaged Browser ID",
+ "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
+ },
+ "CustomBrowserProtocol": {
+ "label": "Unmanaged browser protocol",
+ "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
+ },
+ "DialerRestrictionLevel": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
+ "label": "Transfer telecommunication data to",
+ "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "EncryptData": {
+ "label": "Encrypt org data",
+ "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
},
- "Tap": {
- "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
- "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
- "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
- "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
- "checkInput": "Check input for validity",
- "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
- "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
- "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
- "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
- "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
- "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
- "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
- "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
- "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
- "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
- "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
- "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
- "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
- "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
- "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
- "name": "The name of this network boundary",
- "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
- "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
- "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
- "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
- "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
- "protectUnderLock": "Protects app content while the device is in a locked state.",
- "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
- "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
- "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
- "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
- "required": "Required",
- "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
- "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
- "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
- "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
- "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ "EncryptDataAndroid": {
+ "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
+ },
+ "EncryptDataIos": {
+ "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 256-bit AES encryption to app data.",
+ "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
+ "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
},
- "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
- },
+ "EncryptDataOnEnrolledDevices": {
+ "label": "Encrypt org data on enrolled devices",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
+ },
+ "IOSBackup": {
+ "label": "Backup org data to iTunes and iCloud backups",
+ "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
+ },
+ "IOSFaceID": {
+ "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
+ "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
+ },
+ "IOSOverrideTouchId": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "IOSTouchId": {
+ "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
+ "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
+ },
+ "MessagingRedirectAppDisplayName": {
+ "label": "Messaging App Name"
+ },
+ "MessagingRedirectAppPackageId": {
+ "label": "Messaging App Package ID"
+ },
+ "MessagingRedirectAppUrlScheme": {
+ "label": "Messaging App URL Scheme"
+ },
+ "NotificationRestriction": {
+ "label": "Org data notifications",
+ "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
+ },
+ "OpenLinksManagedBrowser": {
+ "label": "Restrict web content transfer with other apps",
+ "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
+ },
+ "OverrideBiometric": {
+ "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
+ },
+ "PinAccess": {
+ "label": "PIN for access",
+ "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
+ },
+ "PinLength": {
+ "label": "Select minimum PIN length",
+ "tooltip": "This setting specifies the minimum number of digits of a PIN."
+ },
+ "PinType": {
+ "label": "PIN type",
+ "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
+ },
+ "Printing": {
+ "label": "Printing org data",
+ "tooltip": "If blocked, the app cannot print protected data."
+ },
+ "ProtectedMessagingRedirectAppType": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
+ "label": "Transfer messaging data to",
+ "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "ReceiveData": {
+ "label": "Receive data from other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ },
+ "RecheckAccessAfter": {
+ "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
+ "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
+ },
+ "RequireClass3Biometrics": {
+ "label": "Class 3 Biometrics (Android 9.0+)",
+ "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
+ },
+ "RequirePinAfterBiometricChange": {
+ "label": "Override Biometrics with PIN after biometric updates",
+ "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
+ },
+ "RestrictKeyboards": {
+ "duplicatePackageError": "The package ID must be unique.",
+ "invalidPackageError": "Invalid package ID",
+ "label": "Approved keyboards",
+ "select": "Select keyboards to approve",
+ "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
+ "title": "Add approved keyboards",
+ "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
+ },
+ "SaveData": {
+ "label": "Save copies of org data",
+ "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
+ },
+ "SaveDataToSelected": {
+ "label": "Allow user to save copies to selected services",
+ "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
+ },
+ "ScreenCaptureAndAndroidAssistant": {
+ "label": "Screen capture and Google Assistant\n",
+ "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
+ },
+ "SendData": {
+ "label": "Send org data to other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
+ },
+ "SimplePin": {
+ "label": "Simple PIN",
+ "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
+ },
+ "SyncContacts": {
+ "label": "Sync policy managed app data with native apps or add-ins"
+ },
+ "ThirdPartyKeyboards": {
+ "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
+ "label": "Third party keyboards"
+ },
+ "Timeout": {
+ "label": "Timeout (minutes of inactivity)"
+ },
+ "WinCutCopyPaste": {
+ "label": "Allow cut, copy, and paste for",
+ "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
+ },
+ "WinPrintData": {
+ "label": "Print org data",
+ "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
+ },
+ "WinReceiveData": {
+ "label": "Receive data from",
+ "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
+ },
+ "WinSendData": {
+ "label": "Send org data to",
+ "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
+ },
+ "Tap": {
+ "numberOfDays": "Number of days",
+ "pinResetAfterNumberOfDays": "PIN reset after number of days",
+ "previousPinBlockCount": "Select number of previous PIN values to maintain"
+ }
+ },
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Make available to users as an optional update",
+ "optionalValue": "Optional",
+ "required": "Make available to users as a required update",
+ "requiredValue": "Required"
+ },
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "webApp": "Web link",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "PolicySet": {
+ "appManagement": "Application management",
+ "assignments": "Assignments",
+ "basics": "Basics",
+ "deviceEnrollment": "Device enrollment",
+ "deviceManagement": "Device management",
+ "scopeTags": "Scope tags",
+ "appConfigurationTitle": "App configuration policies",
+ "appProtectionTitle": "App protection policies",
+ "appTitle": "Apps",
+ "iOSAppProvisioningTitle": "iOS app provisioning profiles",
+ "deviceLimitRestrictionTitle": "Device limit restrictions",
+ "deviceTypeRestrictionTitle": "Device type restrictions",
+ "enrollmentStatusSettingTitle": "Enrollment status pages",
+ "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
+ "deviceComplianceTitle": "Device compliance policies",
+ "deviceConfigurationTitle": "Device configuration profiles",
+ "powershellScriptTitle": "Powershell scripts"
+ },
"Win32Program": {
"DeviceRestartBehaviorOptions": {
"allow": "App install may force a device restart",
@@ -819,6 +2435,233 @@
"uninstallCommand": "Uninstall command",
"uninstallCommandTooltip": "The complete uninstallation command line used to uninstall this app."
},
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
+ },
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Allow the use of lowercase letters in PIN",
+ "notAllow": "Do not allow the use of lowercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Allow the use of special characters in PIN",
+ "notAllow": "Do not allow the use of special characters in PIN",
+ "requireAtLeastOne": "Require the use of at least one special character in PIN"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Allow the use of uppercase letters in PIN",
+ "notAllow": "Do not allow the use of uppercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
+ }
+ },
"Autopilot": {
"AssignResourceAccount": {
"createNewCommandMenu": "Create new",
@@ -1031,268 +2874,1051 @@
"windowsPCCommandMenu": "Windows PC",
"directoryServiceLabel": "Join to Microsoft Entra ID as"
},
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Admin Groups",
- "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
- "rolesMenuTitle": "Endpoint Manager roles",
- "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
- "RoleAssignmentScope": "Scope Groups"
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Managed devices",
+ "devicesWithoutEnrollment": "Managed apps"
},
- "MinimumOperatingSystem": {
- "Android": {
- "v10": "Android 10.0",
- "v11": "Android 11.0",
- "v4": "Android 4.0 (Ice Cream Sandwich)",
- "v403": "Android 4.0.3 (Ice Cream Sandwich)",
- "v41": "Android 4.1 (Jelly Bean)",
- "v42": "Android 4.2 (Jelly Bean)",
- "v43": "Android 4.3 (Jelly Bean)",
- "v44": "Android 4.4 (KitKat)",
- "v5": "Android 5.0 (Lollipop)",
- "v51": "Android 5.1 (Lollipop)",
- "v6": "Android 6.0 (Marshmallow)",
- "v7": "Android 7.0 (Nougat)",
- "v71": "Android 7.1 (Nougat)",
- "v8": "Android 8.0 (Oreo)",
- "v81": "Android 8.1 (Oreo)",
- "v9": "Android 9.0 (Pie)"
- },
- "IOS": {
- "v10": "iOS 10.0",
- "v11": "iOS 11.0",
- "v12": "iOS 12.0",
- "v13": "iOS 13.0",
- "v14": "iOS 14.0",
- "v15": "iOS 15.0",
- "v16": "iOS 16.0",
- "v17": "iOS 17.0",
- "v8": "iOS 8.0",
- "v9": "iOS 9.0"
- },
- "MacOS": {
- "V10": {
- "10": "OS X Yosemite 10.10",
- "11": "OS X El Capitan 10.11",
- "12": "macOS Sierra 10.12",
- "13": "macOS High Sierra 10.13",
- "14": "macOS Mojave 10.14",
- "15": "macOS Catalina 10.15",
- "7": "Mac OS X Lion 10.7",
- "8": "OS X Mountain Lion 10.8",
- "9": "OS X Mavericks 10.9"
- },
- "V11": {
- "0": "macOS Big Sur 11.0"
- },
- "V12": {
- "0": "macOS Monterey 12.0"
- },
- "V13": {
- "0": "macOS Ventura 13.0"
- },
- "V14": {
- "0": "macOS Sonoma 14.0"
- }
- },
- "Windows": {
- "V10Release": {
- "release1607": "Windows 10 1607",
- "release1703": "Windows 10 1703",
- "release1709": "Windows 10 1709",
- "release1803": "Windows 10 1803",
- "release1809": "Windows 10 1809",
- "release1903": "Windows 10 1903",
- "release1909": "Windows 10 1909",
- "release2004": "Windows 10 2004",
- "release21H1": "Windows 10 21H1",
- "release21H2": "Windows 10 21H2",
- "release22H2": "Windows 10 22H2",
- "release2H20": "Windows 10 20H2"
- },
- "V11Release": {
- "release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
- },
- "v10": "Windows 10.0",
- "v80": "Windows 8.0",
- "v81": "Windows 8.1"
- },
- "WindowsPhone": {
- "v80": "Windows Phone 8.0",
- "v81": "Windows Phone 8.1"
- }
- },
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
- "apps": "apps",
- "appsListName": "Application list",
- "blockingApps": "Blocking apps",
- "managedApps": "Managed apps",
- "noApps": "No applications",
- "noAppsError": "Error retrieving applications",
- "selectApps": "Select apps",
- "selectedAppsCount": "{0} apps selected (100 max)",
- "useSelectedAppsAll": "All",
- "useSelectedAppsSelected": "Selected",
- "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
- },
- "Header": {
- "application": "Application",
- "publisher": "Publisher",
- "version": "Version"
+ "AppProtection": {
+ "allAppTypes": "Target to all app types",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Apps in Android Work Profile",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
+ "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
+ "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
+ "appsOnUnmanagedDevices": "Apps on unmanaged devices",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Not Available",
+ "windows10PlatformLabel": "Windows 10 and later",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Project Online Desktop Client",
+ "visioProRetail": "Visio Online Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Failed to delete {0}",
+ "failureCa": "Failed to delete {0} because it is referenced by CA policies",
+ "modifying": "Deleting {0}",
+ "success": "Successfully deleted {0}"
+ },
+ "Notify": {
+ "failure": "Failed to update {0}",
+ "modifying": "Modifying {0}",
+ "success": "Successfully updated {0}"
+ },
+ "menuLabel": "Authentication context"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
+ "certificate": "Certificate authentication",
+ "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
+ "multifactor": "Multifactor authentication",
+ "require": "Require federated authentication method (Preview)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
+ },
+ "Option": {
+ "always": "Always persistent",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "label": "Persistent browser session",
+ "never": "Never persistent"
+ },
+ "Warning": {
+ "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Hours or days",
+ "value": "Frequency"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} days",
+ "singular": "1 day"
+ },
+ "Hour": {
+ "plural": "{0} hours",
+ "singular": "1 hour"
+ },
+ "daysOption": "Days",
+ "everytime": "Every time",
+ "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
+ "hoursOption": "Hours",
+ "label": "Sign-in frequency",
+ "placeholder": "Select units"
+ }
+ },
+ "mainOption": "Modify session lifetime",
+ "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
+ },
+ "SingleSelectorActive": {
+ "failed": "Unable to load this data.",
+ "reattempt": "Loading data. Reattempt {0} of {1}."
},
- "SearchBox": {
- "ariaLabel": "Search apps",
- "placeHolder": "Search by name or publisher"
- },
- "allowToUseToggle": "Allow users to use device if installation error occurs",
- "blockToggle": "Block device use until all apps and profiles are installed",
- "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
- "collectLogToggle": "Turn on log collection and diagnostics page for end users",
- "create": "Create Profile",
- "customMessageTextBox": "Error message",
- "customMessageToggle": "Show custom message when time limit or error occurs",
- "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
- "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
- "progressToggle": "Show app and profile configuration progress",
- "resetToggle": "Allow users to reset device if installation error occurs",
- "timeout": "Show an error when installation takes longer than specified number of minutes"
- },
- "TableHeaders": {
- "activity": "Activity",
- "activityName": "Activity name",
- "actor": "Initiated by (actor)",
- "actorType": "Actor type",
- "app": "App",
- "appName": "App name",
- "applicationName": "Application name",
- "approvalType": "Approval method",
- "assignedGroups": "Group",
- "assignment": "Assignment",
- "assignmentStatus": "Assigned",
- "assignments": "Assignments",
- "attributeName": "Attribute name",
- "attributeType": "Attribute type",
- "bundleId": "Bundle-Id",
- "category": "Category",
- "complianceGracePeriodExpiration": "Compliance grace period expiration",
- "configurationType": "Profile type",
- "conflictingPolicy": "Conflicting Policies",
- "createdDate": "Created date",
- "currentOs": "Current OS",
- "date": "Date",
- "dateRange": "Date range",
- "deployed": "Deployed",
- "description": "Description",
- "device": "Device",
- "deviceId": "Device ID",
- "deviceName": "Device name",
- "deviceOrApplicationName": "Device or application name",
- "deviceReporting": "Devices reporting",
- "diagnosticCode": "Diagnostic Code",
- "diagnosticText": "Diagnostic Text",
- "diagnostics": "Diagnostics",
- "displayName": "Display name",
- "driversToReview": "Drivers to review",
- "eSIMActivationStatus": "Activation status",
- "eSIMCellularStatus": "Cellular status",
- "eSIMICCID": "ICCID",
- "eSIMPoolName": "Cellular subscription",
- "eSIMState": "eSIM state",
- "eSIMTokenAmount": "Total eSIM activation codes",
- "enabled": "Enabled",
- "enabledPlatforms": "Enabled Platforms",
- "encryptionReadiness": "Encryption Readiness",
- "encryptionStatus": "Encryption Status",
- "endTime": "End time",
- "enrollment": "Enrollment",
- "enrollmentAttempt": "Enrollment start",
- "eventDateTime": "Timestamp",
- "eventIdentifier": "Event ID",
- "eventLevel": "Level",
- "excluded": "Excluded",
- "failure": "Failure",
- "featureUpdateDeferral": "Feature Deferral",
- "featureUpdateVersion": "Feature Update Version",
- "featureUpdatesPaused": "Feature (Paused)",
- "featureUpdatesStatus": "Feature",
- "from": "From",
- "groups": "Groups",
- "groupsSelected": "Groups Selected",
- "installationStatus": "Installation Status",
- "issueId": "Issue id",
- "lastCheckinTime": "Last Check-in Time",
- "lastModified": "Last modified",
- "lastScanTime": "Last Scan Time",
- "lastSuccessfulSync": "Last Successful Sync",
- "lastUpdated": "Last Updated",
- "location": "Location",
- "loggedInUser": "Logged in user",
- "message": "Message",
- "model": "Model",
- "mtdConnector": "MTD Connector",
- "name": "Profile name",
- "oSVersion": "OS Version",
- "operationType": "Operation type",
- "os": "OS",
- "packageName": "Package name",
- "partnerName": "Partner",
- "partnerStatus": "Partner status",
- "permission": "Permission",
- "platform": "Platform",
- "policies": "Policies",
- "policy": "Policy",
- "policyType": "Policy type",
- "preventedUpdateDays": "Restricted days",
- "priority": "Priority",
- "profiles": "Profiles",
- "publicAddress": "Public address",
- "publisher": "Publisher",
- "qualityUpdateDeferral": "Quality Deferral",
- "qualityUpdateRelease": "Quality Update Release",
- "qualityUpdateVersion": "Quality Update Version",
- "qualityUpdatesPaused": "Quality (Paused)",
- "qualityUpdatesStatus": "Quality",
- "reason": "Reason",
- "resource": "Resource",
- "roleName": "Name",
- "roles": "Roles",
- "scopeGroups": "Scope groups",
- "scopeSize": "Assigned Scope Groups",
- "scopeTags": "Scope tags",
- "scriptName": "Script name",
- "scriptType": "Script type",
- "servicingOption": "Servicing channel",
- "setting": "Setting",
- "settings": "Settings",
- "siteName": "Site name",
- "source": "Source",
- "sourceProfile": "Source Profile",
- "startTime": "Start time",
- "state": "State",
- "stateDetails": "State details",
- "status": "Status",
- "subject": "Subject",
- "support": "Support",
- "supportEndDate": "Support End Date",
- "tPMVersion": "TPM Version",
- "target": "Target",
- "timeWindows": "Time windows",
- "timeZone": "Time zone",
- "type": "Type",
- "updateScheduleType": "Schedule type",
- "updateStatus": "Update Status",
- "user": "User",
- "userPrincipalName": "User principal name",
- "users": "Users",
- "usersExcluded": "Users excluded",
- "usersTargeted": "Users targeted",
- "value": "Value",
- "includedGroups": "Included Groups",
- "excludedGroups": "Excluded Groups",
- "licenseType": "License type"
- },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Choose directory roles"
+ },
+ "Excluded": {
+ "gridAria": "List of excluded users"
+ },
+ "Included": {
+ "gridAria": "List of included users"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
+ "customRoleSelected": "At least one custom role is selected",
+ "failed": "\"{0}\" must be configured",
+ "roles": "Select at least one role",
+ "usersGroups": "Select at least one user or group"
+ },
+ "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
+ },
+ "advancedTabText": "Advanced",
+ "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
+ "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
+ "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
+ "allDayCheckboxLabel": "All day",
+ "allDevicePlatforms": "Any device",
+ "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
+ "allGuestUserLabel": "All guest and external users",
+ "allRiskLevelsOption": "All risk levels",
+ "allTrustedLocationLabel": "All trusted locations",
+ "allUserGroupSetSelectorLabel": "All users and groups selected",
+ "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
+ "allUsersString": "All users",
+ "and": "{0} AND {1} ",
+ "andWithGrouping": "({0}) AND {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Any cloud app",
+ "appContextOptionInfoContent": "Requested authentication tag",
+ "appContextOptionLabel": "Requested authentication tag (Preview)",
+ "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
+ "appNotSetSeletorLabel": "0 cloud apps selected",
+ "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
+ "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
+ "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
+ "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
+ "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
+ "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
+ "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
+ "applyConditonLabel": "Configure",
+ "ariaLabelPolicyDisabled": "Policy is disabled",
+ "ariaLabelPolicyEnabled": "Policy is enabled",
+ "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
+ "blockAccess": "Block access",
+ "builtInDirectoryRoleLabel": "Built-in directory roles",
+ "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "casInfoBubble": "This control works for various cloud apps.",
+ "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "cert64DownloadCol": "Download base64 certificate",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Download certificate",
+ "certDurationCol": "Expiry",
+ "certDurationStartCol": "Valid from",
+ "certName": "VpnCert",
+ "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Choose Applications",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Chosen Applications",
+ "chooseApplicationsEmpty": "No Applications",
+ "chooseApplicationsNone": "None",
+ "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseApplicationsPlural": "{0} and {1} more",
+ "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
+ "chooseApplicationsRemove": "Remove",
+ "chooseApplicationsReturnedPlural": "{0} applications found",
+ "chooseApplicationsReturnedSingular": "1 application found",
+ "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
+ "chooseApplicationsSearchHint": "Search Applications...",
+ "chooseApplicationsSearchLabel": "Applications",
+ "chooseApplicationsSearching": "Searching...",
+ "chooseApplicationsSelect": "Select",
+ "chooseApplicationsSelected": "Selected",
+ "chooseApplicationsSingular": "{0} and 1 more",
+ "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "chooseLocationCorpnetItem": "Corporate network",
+ "chooseLocationSelectedLocationsLabel": "Selected locations",
+ "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Choose Locations",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Chosen Locations",
+ "chooseLocationsEmpty": "No Locations",
+ "chooseLocationsExcludedSelectorTitle": "Select",
+ "chooseLocationsIncludedSelectorTitle": "Select",
+ "chooseLocationsNone": "None",
+ "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseLocationsPlural": "{0} and {1} more",
+ "chooseLocationsRemove": "Remove",
+ "chooseLocationsReturnedPlural": "{0} locations found",
+ "chooseLocationsReturnedSingular": "1 location found",
+ "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
+ "chooseLocationsSearchHint": "Search Locations...",
+ "chooseLocationsSearchLabel": "Locations",
+ "chooseLocationsSearching": "Searching...",
+ "chooseLocationsSelect": "Select",
+ "chooseLocationsSelected": "Selected",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
+ "chooseLocationsSingular": "{0} and 1 more",
+ "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "claimProviderAddCommandText": "New custom control",
+ "claimProviderAddNewBladeTitle": "New custom control",
+ "claimProviderDeleteCommand": "Delete",
+ "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "claimProviderDeleteTitle": "Are you sure?",
+ "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
+ "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
+ "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
+ "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
+ "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
+ "claimProviderNotificationCreateTitle": "Creating '{0}'",
+ "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
+ "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
+ "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
+ "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
+ "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
+ "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
+ "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
+ "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "claimProviderNotificationUpdateTitle": "Updating '{0}'",
+ "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
+ "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
+ "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
+ "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
+ "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
+ "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
+ "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
+ "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
+ "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
+ "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
+ "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
+ "claimProvidersNone": "No custom controls",
+ "claimProvidersSearchPlaceholder": "Search controls.",
+ "classicPoilcyFilterTitle": "Show",
+ "classicPolicyAllPlatforms": "All Platforms",
+ "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
+ "classicPolicyCloudAppTitle": "Cloud application",
+ "classicPolicyControlAllow": "Allow",
+ "classicPolicyControlBlock": "Block",
+ "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
+ "classicPolicyControlRequireCompliantDevice": "Require compliant device",
+ "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
+ "classicPolicyControlRequireMfa": "Require multifactor authentication",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
+ "classicPolicyDeleteCommand": "Delete",
+ "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
+ "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
+ "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
+ "classicPolicyDetailBladeTitle": "Details",
+ "classicPolicyDisableCommand": "Disable",
+ "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
+ "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
+ "classicPolicyDisableFailTitle": "Failed to disable classic policy",
+ "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
+ "classicPolicyDisableInProgressTitle": "Disabling classic policy",
+ "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
+ "classicPolicyDisableSuccessTitle": "Classic policy disabled",
+ "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
+ "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
+ "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
+ "classicPolicyFilterAll": "All policies",
+ "classicPolicyFilterDisabled": "Disabled policies",
+ "classicPolicyFilterEnabled": "Enabled policies",
+ "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
+ "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
+ "classicPolicyIncludedPlatformsTitle": "Included device platforms",
+ "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
+ "classicPolicyMigrateCommand": "Migrate",
+ "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
+ "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
+ "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
+ "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
+ "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
+ "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
+ "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
+ "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
+ "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
+ "classicPolicySaveFailDescription": "Failed to save '{0}'",
+ "classicPolicySaveFailTitle": "Failed to save classic policy",
+ "classicPolicySaveInProgressDescription": "Saving '{0}'",
+ "classicPolicySaveInProgressTitle": "Saving classic policy",
+ "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
+ "classicPolicySaveSuccessTitle": "Classic policy saved",
+ "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
+ "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
+ "clientAppBladeTitle": "Client apps",
+ "clientAppDescription": "Select the client apps this policy will apply to",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
+ "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
+ "clientAppLegacyHeader": "Legacy authentication clients",
+ "clientAppMobileDesktop": "Mobile apps and desktop clients",
+ "clientAppModernHeader": "Modern authentication clients",
+ "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
+ "clientAppSelectSpecificClientApps": "Select client apps",
+ "clientAppWebBrowser": "Browser",
+ "clientAppsSelectedLabel": "{0} included",
+ "clientTypeBrowser": "Browser",
+ "clientTypeEas": "Exchange ActiveSync clients",
+ "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
+ "clientTypeModernAuth": "Modern authentication clients",
+ "clientTypeOtherClients": "Other clients",
+ "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
+ "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
+ "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
+ "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
+ "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
+ "cloudappsSelectorPluralExcluded": "{0} apps excluded",
+ "cloudappsSelectorPluralIncluded": "{0} apps included",
+ "cloudappsSelectorSingularExcluded": "1 app excluded",
+ "cloudappsSelectorSingularIncluded": "1 app included",
+ "cloudappsSelectorUserPlural": "{0} apps",
+ "cloudappsSelectorUserSingular": "1 app",
+ "conditionLabelMulti": "{0} conditions selected",
+ "conditionLabelOne": "1 condition selected",
+ "conditionalAccessBladeTitle": "Conditional Access",
+ "conditionsNotSelectedLabel": "Not configured",
+ "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
+ "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
+ "configureCasText": "Configure Cloud App Security",
+ "configureCustomControlsText": "Configure custom policy",
+ "controlLabelMulti": "{0} controls selected",
+ "controlLabelOne": "1 control selected",
+ "controlValidatorText": "Please select at least one control",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
+ "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
+ "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
+ "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
+ "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
+ "controlsMamInfoBubble": "Device must use these approved client applications.",
+ "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
+ "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
+ "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
+ "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
+ "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
+ "createNewVpnCert": "New certificate",
+ "createdTimeLabel": "Creation time",
+ "customRoleLabel": "Custom roles (not supported)",
+ "dateRangeTypeLabel": "Date range",
+ "daysOfWeekPlaceholderText": "Filter days of the week",
+ "daysOfWeekTypeLabel": "Days of the week",
+ "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
+ "descriptionContentForControlsAndOr": "For multiple controls",
+ "devicePlatform": "Device platform",
+ "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} included",
+ "devicePlatformIncludeExclude": "{0} and {1} excluded",
+ "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
+ "devicePlatformsNone": "None",
+ "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
+ "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
+ "deviceStateAll": "All device state",
+ "deviceStateCompliant": "Device marked as compliant",
+ "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
+ "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
+ "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
+ "deviceStateConditionSelectorLabel": "Device state (deprecated)",
+ "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
+ "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
+ "deviceStateDomainJoinedInfoLinkText": "Learn more.",
+ "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
+ "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
+ "directoryRolesLabel": "Directory roles",
+ "discardbutton": "Discard",
+ "downloadDefaultFileName": "IP Ranges",
+ "downloadExampleFileName": "Example",
+ "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
+ "duplicate": "Duplicate",
+ "duplicatePolicyName": "{0} COPY",
+ "endDatePickerLabel": "Ends",
+ "endTimePickerLabel": "End time",
+ "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
+ "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
+ "enterUserText": "No user is selected. Select a user.",
+ "evaluationResult": "Evaluation result",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
+ "excludeAllTrustedLocationSelectorText": "all trusted locations",
+ "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
+ "friday": "Friday",
+ "grantControls": "Grant controls",
+ "gridNetworkTrusted": "Trusted",
+ "gridPolicyCreatedDateTime": "Creation Date",
+ "gridPolicyEnabled": "Enabled",
+ "gridPolicyModifiedDateTime": "Modified Date",
+ "gridPolicyName": "Policy Name",
+ "gridPolicyState": "State",
+ "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
+ "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
+ "groupSelectionBladeSelect": "Select groups",
+ "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "groupsSelectionBladeTitle": "Groups",
+ "helpCommonScenariosText": "Interested in common scenarios?",
+ "helpCondition1": "When any user is outside the company network",
+ "helpCondition2": "When users in the 'Managers' group sign-in",
+ "helpConditionsTitle": "Conditions",
+ "helpControl1": "They're required to sign in with multifactor authentication",
+ "helpControl2": "They are required be on an Intune compliant or domain-joined device",
+ "helpControlsTitle": "Controls",
+ "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
+ "helpIntroTitle": "What is Conditional Access?",
+ "helpLearnMoreText": "Want to learn more about Conditional Access?",
+ "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
+ "helpStartStep2": "Specify policy Conditions and Controls",
+ "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
+ "helpStartTitle": "Get started",
+ "highRisk": "High",
+ "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
+ "includeAppsTextFormat": "Include: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
+ "includeUnknownAreasCheckboxLabel": "Include unknown areas",
+ "infoCommandLabel": "Info",
+ "invalidCertDuration": "Invalid cert duration",
+ "invalidIpAddress": "Value must be a valid IP address",
+ "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
+ "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Load all",
+ "loading": "Loading...",
+ "locationConfigureNamedLocationsText": "Configure all trusted locations",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
+ "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
+ "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
+ "locationsAllLocationsLabel": "Any location",
+ "locationsAllNamedLocationsLabel": "All trusted IPs",
+ "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
+ "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
+ "locationsSelectedPrivateLinksLabel": "Selected Private Links",
+ "lowRisk": "Low",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
+ "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
+ "markAsTrustedCheckboxLabel": "Mark as trusted location",
+ "mediumRisk": "Medium",
+ "memberSelectionCommandRemove": "Remove",
+ "menuItemClaimProviderControls": "Custom controls (Preview)",
+ "menuItemClassicPolicies": "Classic policies",
+ "menuItemInsightsAndReporting": "Insights and reporting",
+ "menuItemManage": "Manage",
+ "menuItemNamedLocationsPreview": "Named locations (Preview)",
+ "menuItemNamedNetworks": "Named locations",
+ "menuItemPolicies": "Policies",
+ "menuItemTermsOfUse": "Terms of use",
+ "modifiedTimeLabel": "Modified time",
+ "monday": "Monday",
+ "nameLabel": "Name",
+ "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
+ "namedLocationTypeCountry": "Countries/Regions",
+ "namedLocationTypeLabel": "Define the location using:",
+ "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
+ "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "You need to select at least one country/region",
+ "namedNetworkDeleteCommand": "Delete",
+ "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "namedNetworkDeleteTitle": "Are you sure?",
+ "namedNetworkDownloadIpRange": "Download",
+ "namedNetworkInvalidRange": "Value must be a valid IP range.",
+ "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
+ "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
+ "namedNetworkIpRangesTab": "IP ranges",
+ "namedNetworkListAdd": "New location",
+ "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
+ "namedNetworkNameDescription": "Example: 'Redmond office'",
+ "namedNetworkNameInvalid": "The supplied name is invalid.",
+ "namedNetworkNameRequired": "You must supply a name for this location.",
+ "namedNetworkNoIpRanges": "No IP ranges",
+ "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
+ "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
+ "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
+ "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
+ "namedNetworkNotificationCreateTitle": "Creating '{0}'",
+ "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
+ "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
+ "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
+ "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
+ "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
+ "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
+ "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
+ "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
+ "namedNetworkSearchPlaceholder": "Search locations.",
+ "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
+ "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
+ "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
+ "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
+ "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
+ "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
+ "namedNetworkUploadIpRange": "Upload",
+ "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
+ "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
+ "namedNetworksAdd": "New named location",
+ "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} and {1} excluded",
+ "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} included",
+ "namedNetworksNone": "No named locations found.",
+ "namedNetworksTitle": "Configure locations",
+ "namednetworkExceedingSizeErrorBladeTitle": "Error details",
+ "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
+ "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
+ "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
+ "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
+ "newCertName": "new cert",
+ "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
+ "noPolicyRowMessage": "No policies",
+ "noSPSelected": "No service principal selected",
+ "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
+ "noUserSelected": "No user selected",
+ "noneRisk": "No risk",
+ "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
+ "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
+ "oneUserSelected": "1 user selected",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
+ "or": "{0} OR {1} ",
+ "pickerDoneCommand": "Done",
+ "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
+ "policiesBladeTitle": "Policies",
+ "policiesBladeTitleWithAppName": "Policies: {0}",
+ "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
+ "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
+ "policyAssignmentsSection": "Assignments",
+ "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
+ "policyCloudAppsDisplayTextAllApp": "All apps",
+ "policyCloudAppsLabel": "Cloud apps",
+ "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionDevicePlatform": "Device platforms",
+ "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
+ "policyConditionLocation": "Locations",
+ "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
+ "policyConditionLocationPreview": "Locations (Preview)",
+ "policyConditionSigninRisk": "Sign-in risk",
+ "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
+ "policyConditionUserRisk": "User risk",
+ "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
+ "policyConditioniClientApp": "Client apps",
+ "policyControlAllowAccessDisplayedName": "Grant access",
+ "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
+ "policyControlBladeTitle": "Grant",
+ "policyControlBlockAccessDisplayedName": "Block access",
+ "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
+ "policyControlContentDescription": "Control access enforcement to block or grant access.",
+ "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
+ "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
+ "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
+ "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
+ "policyControlRequireMamDisplayedName": "Require approved client app",
+ "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
+ "policyControlSelectAuthStrength": "Require authentication strength",
+ "policyControlsNoControlsSelected": "0 controls selected",
+ "policyControlsSection": "Access controls",
+ "policyCreatBladeTitle": "New",
+ "policyCreateButton": "Create",
+ "policyCreateFailedMessage": "Error: {0}",
+ "policyCreateFailedTitle": "Failed to create '{0}'",
+ "policyCreateInProgressTitle": "Creating '{0}'",
+ "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyCreateSuccessTitle": "Successfully created '{0}'",
+ "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "policyDeleteFailTitle": "Failed to delete '{0}'",
+ "policyDeleteInProgressTitle": "Deleting '{0}'",
+ "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
+ "policyEnforceLabel": "Enable policy",
+ "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
+ "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
+ "policyErrorUnknown": "Something went wrong, please try again later.",
+ "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
+ "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
+ "policyNameCannotBeEmpty": "Policy name can't be empty",
+ "policyNameDevice": "Device policy",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Mobile App Management policy",
+ "policyNameMfaLocation": "Multifactor authentication and location policy",
+ "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
+ "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
+ "policyOff": "Off",
+ "policyOn": "On",
+ "policyReportOnly": "Report-only",
+ "policyReviewSection": "Review",
+ "policySaveButton": "Save",
+ "policyStatusIconDescription": "Policy is Enabled",
+ "policyStatusIconEnabled": "Enabled status icon",
+ "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
+ "policyTemplateName2": "Allow {0} access only on managed devices",
+ "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
+ "policyTriggerRiskSpecific": "Select specific risk level",
+ "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
+ "policyTriggersNoConditionsSelected": "0 conditions selected",
+ "policyTriggersSelectorLabel": "Conditions",
+ "policyUpdateFailedMessage": "Error: {0}",
+ "policyUpdateFailedTitle": "Failed to update {0}",
+ "policyUpdateInProgressTitle": "Updating {0}",
+ "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyUpdateSuccessTitle": "Successfully updated {0}",
+ "primaryCol": "Primary",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
+ "requireAllControlsText": "Require all the selected controls",
+ "requireCompliantDevice": "Require compliant device",
+ "requireDomainJoined": "Require domain-joined device",
+ "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
+ "requireMFA": "Require multifactor authentication",
+ "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
+ "requireOneControlText": "Require one of the selected controls",
+ "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
+ "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
+ "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
+ "resetFilters": "Reset filters",
+ "sPRequired": "Service principal required",
+ "sPSelectorInfoBalloon": "User or Service Principal you want to test",
+ "saturday": "Saturday",
+ "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
+ "securityDefaultsPolicyName": "Security defaults",
+ "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
+ "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
+ "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
+ "selectDevicePlatforms": "Select device platforms",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Select locations",
+ "selectedSP": "Selected Service Principal",
+ "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
+ "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
+ "servicePrincipalDataGridAria": "List of available service principals",
+ "servicePrincipalDropDownLabel": "What does this policy apply to?",
+ "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
+ "servicePrincipalRadioAll": "All owned service principals",
+ "servicePrincipalRadioSelect": "Select service principals",
+ "servicePrincipalSelectionsAria": "Selected service principals grid",
+ "servicePrincipalSelectorAria": "List of chosen service principals",
+ "servicePrincipalSelectorMultiple": "{0} service principals selected",
+ "servicePrincipalSelectorSingle": "1 service principal selected",
+ "servicePrincipalSpecificExc": "Specific service principals excluded",
+ "servicePrincipalSpecificInc": "Specific service principals included",
+ "servicePrincipals": "Service principals",
+ "sessionControlBladeTitle": "Session",
+ "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
+ "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
+ "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
+ "sessionControls": "Session controls",
+ "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
+ "sessionControlsCasLabel": "Use Conditional Access App Control",
+ "sessionControlsSecureSignInLabel": "Require token binding",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} included",
+ "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
+ "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
+ "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
+ "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
+ "specificUsersExcluded": "specific users excluded",
+ "specificUsersIncluded": "Specific users included",
+ "specificUsersIncludedAndExcluded": "Specific users excluded and included",
+ "startDatePickerLabel": "Starts",
+ "startFreeTrial": "Start a free trial",
+ "startTimePickerLabel": "Start time",
+ "sunday": "Sunday",
+ "testButton": "What If",
+ "thumbprintCol": "Thumbprint",
+ "thursday": "Thursday",
+ "timeConditionAllTimesLabel": "Any time",
+ "timeConditionIntroText": "Configure the time this policy will apply to",
+ "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
+ "timeConditionSelectorLabel": "Time (Preview)",
+ "timeConditionSpecificLabel": "Specific times",
+ "timeSelectorAllTimesText": "Any time",
+ "timeSelectorSpecificTimesText": "Specific times configured",
+ "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
+ "timeZoneDropdownLabel": "Time zone",
+ "timeZoneDropdownPlaceholderText": "Select a time zone",
+ "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
+ "tooManyPoliciesTitle": "More than 50 policies found",
+ "trustedLocationStatusIconDescription": "Location is trusted",
+ "trustedLocationStatusIconEnabled": "Trusted status icon",
+ "tuesday": "Tuesday",
+ "uploadInBadState": "Unable to upload the specified file.",
+ "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
+ "upsellAppsTitle": "Secure applications",
+ "upsellBannerText": "Get a free Premium trial to use this feature",
+ "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
+ "upsellDataTitle": "Secure data",
+ "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
+ "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
+ "upsellRiskTitle": "Protect against risk",
+ "upsellTitle": "Conditional Access",
+ "upsellWhyTitle": "Why use Conditional Access?",
+ "userAppNoneOption": "None",
+ "userNamePlaceholderText": "Enter User Name",
+ "userNotSetSeletorLabel": "0 users and groups selected",
+ "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
+ "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
+ "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
+ "userOrSPSelectionBladeTitle": "Users or workload identities",
+ "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
+ "userRequired": "User Required",
+ "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
+ "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
+ "userSPRequired": "User or Service principal required",
+ "userSPSelectorTitle": "User or Workload identity",
+ "userSelectionBladeAllUsersAndGroups": "All users and groups",
+ "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
+ "userSelectionBladeExcludeTabTitle": "Exclude",
+ "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
+ "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
+ "userSelectionBladeIncludeTabTitle": "Include",
+ "userSelectionBladeIncludedSelectorTitle": "Select",
+ "userSelectionBladeSelectUsers": "Select users",
+ "userSelectionBladeSelectedUsers": "Select users and groups",
+ "userSelectionBladeTitle": "Users and groups",
+ "userSelectorBladeTitle": "Users",
+ "userSelectorExcluded": "{0} excluded",
+ "userSelectorGroupPlural": "{0} groups",
+ "userSelectorGroupSingular": "1 group",
+ "userSelectorIncluded": "{0} included",
+ "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "userSelectorSelected": "{0} selected",
+ "userSelectorTitle": "User",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} users",
+ "userSelectorUserSingular": "1 user",
+ "userSelectorWithExclusion": "{0} and {1}",
+ "usersGroupsLabel": "Users and groups",
+ "viewApprovedAppsText": "See list of approved client apps",
+ "viewCompliantAppsText": "See list of policy protected client apps",
+ "viewPolicyInformation": "View policy information",
+ "vpnBladeTitle": "VPN connectivity",
+ "vpnCertCreateFailedMessage": "Error: {0}",
+ "vpnCertCreateFailedTitle": "Failed to create {0}",
+ "vpnCertCreateInProgressTitle": "Creating {0}",
+ "vpnCertCreateSuccessMessage": "Successfully created {0}.",
+ "vpnCertCreateSuccessTitle": "Successfully created {0}",
+ "vpnCertNoRowsMessage": "No VPN certificates found",
+ "vpnCertUpdateFailedMessage": "Error: {0}",
+ "vpnCertUpdateFailedTitle": "Failed to update {0}",
+ "vpnCertUpdateInProgressTitle": "Updating {0}",
+ "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
+ "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
+ "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
+ "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
+ "vpnMenuText": "VPN connectivity",
+ "vpncertDropdownDefaultOption": "Duration",
+ "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
+ "vpncertDropdownLabel": "Select duration",
+ "vpncertDropdownOneyearOption": "1 year",
+ "vpncertDropdownThreeyearOption": "3 years",
+ "vpncertDropdownTwoyearOption": "2 years",
+ "wednesday": "Wednesday",
+ "whatIfCountry": "Country/Region",
+ "whatIfCountryInfo": "The country/region the user is signing in from.",
+ "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
+ "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
+ "whatIfIpAddress": "IP address",
+ "whatIfIpAddressInfo": "IP address the user is signing in from.",
+ "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
+ "whatIfSelectCountry": "Select country/region...",
+ "whatIfSelectDevicePlatform": "Select device platform...",
+ "whatIfSelectPrivateLink": "Select private link...",
+ "whatIfSelectSignInRisk": "Select sign-in risk...",
+ "whatIfSignInRisk": "Sign-in risk",
+ "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
+ "whatIfUnknownAreas": "Unknown Areas",
+ "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Workload identities (preview)",
+ "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
+ "workloadIdentity": "Workload identity"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Overview"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load iOS software update profiles"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS update profile",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profile"
+ },
+ "listLoadError": "Unable to load iOS software update profiles, try again later",
+ "lowercase": "iOS update policy",
+ "uppercase": "iOS Update policy"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
+ "latestUpdate": "Latest update",
+ "noLongerSupported": "Selected version is no longer supported",
+ "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
+ "prefix": "Install iOS/iPadOS",
+ "selectSupported": "Select update version supported by Apple",
+ "updateToInstall": "Update to install"
+ },
+ "Schedule": {
+ "always": "Update at next check-in",
+ "duringTimeWindows": "Update during scheduled time",
+ "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
+ "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
+ "label": "Schedule type",
+ "outsideActiveHours": "Update outside of active hours (legacy)",
+ "outsideTimeWindows": "Update outside of scheduled time",
+ "timeWindow": "Time window",
+ "timeZone": "Time zone",
+ "title": "Update policy schedule settings:",
+ "weekly": "Weekly schedule",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
+ "label": "Select version to install"
+ },
+ "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
+ "notAvailable": "N/A"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "There are no iOS update policies to display",
+ "macOsUpdates": "There are no macOS software update policies to display",
+ "windowsUpdates": "There are no update rings for Windows 10 and later to show."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Device name",
+ "deviceUpdateStatus": "Device update status",
+ "lastUpdated": "Last updated",
+ "osVersion": "OS version",
+ "userPrincipalName": "User name"
+ },
+ "maximumOSVersionFilter": "Maximum OS version",
+ "minimumOSVersionFilter": "Minimum OS version",
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by device name, user name or OS version",
+ "title": "Account summary for macOS devices"
+ },
+ "Category": {
+ "configurationDataFile": "Configuration data file",
+ "critical": "Critical",
+ "firmware": "Firmware",
+ "other": "Other"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "successfulUpdateCount": "Successful updates deployed",
+ "totalUpdateCount": "Total updates deployed",
+ "updateCategory": "Update category",
+ "updateCategoryStatus": "Update category status"
+ },
+ "noData": "No data to display"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load macOS software update profiles"
+ }
+ },
+ "State": {
+ "available": "Available",
+ "commandFailed": "Command failed",
+ "downloadFailed": "Download failed",
+ "downloadInsufficientNetwork": "Download insufficient network",
+ "downloadInsufficientPower": "Download insufficient power",
+ "downloadInsufficientSpace": "Download insufficient space",
+ "downloaded": "Downloaded",
+ "downloading": "Downloading",
+ "idle": "Idle",
+ "installFailed": "Install failed",
+ "installInsufficientPower": "Install insufficient power",
+ "installInsufficientSpace": "Install insufficient space",
+ "installing": "Installing",
+ "scheduled": "Scheduled",
+ "success": "Success",
+ "unknown": "Unknown"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "updateName": "Update name",
+ "updateStatus": "Update status",
+ "version": "Version"
+ },
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by update name or version"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS update profile",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profile"
+ },
+ "error": "Error",
+ "errorOrErrors": "Error(s)",
+ "errors": "Errors",
+ "listLoadError": "Unable to load macOS software update profiles, try again later",
+ "lowercase": "macOs update policy",
+ "other": "Other",
+ "subtitle": "MacOS software update",
+ "upToDate": "Up to date",
+ "uppercase": "macOS Update Policy"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Please try again later",
+ "title": "Failed to delete {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Please try again later"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Please try again later",
+ "title": "Failed to load {0}"
+ },
+ "idWrongFormat": "The provided id for the profile is not in the expected format."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "At least one time window should be selected",
+ "tooMany": "A maximum of 20 time windows can be configured"
+ }
+ },
+ "endDay": "End day",
+ "endTime": "End time",
+ "startDay": "Start day",
+ "startTime": "Start time",
+ "timeWindowError": "Choose a window of time that spans at least one hour."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load update ring profiles for Windows 10 and later."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Update ring for Windows 10 and later",
+ "title": "Windows Update for Business"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 and later",
+ "title": "Update ring for Windows 10 and later"
+ },
+ "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
+ "lowercase": "Update ring",
+ "uppercase": "Update Ring"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Update policy settings",
+ "updateRingSettings": "Update ring settings"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Create {0}",
+ "edit": "Edit {0}"
+ }
+ },
+ "notScannedYet": "Not scanned yet",
+ "outOfDateIosDevices": "Out of date iOS devices"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge, version 77 and later",
+ "storeApp": "Store app",
+ "office365Suite": "Microsoft 365 Apps",
+ "microsoftDefenderATP": "Microsoft Defender for Endpoint",
+ "other": "Other",
+ "webApplication": "Web Application"
+ },
+ "Filters": {
+ "ruleSyntax": "Rule syntax",
+ "filters": "Filters"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Please select a discovery script",
+ "scriptFileLabel": "Select your discovery script"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
+ "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Script",
+ "placeholder": "Click to select",
+ "searchboxPlaceholder": "Search by script name",
+ "title": "Select a discovery script"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Custom compliance rules summary"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
+ "noFileSelectedError": "Please select a json file",
+ "parseFileSelectedError": "The json file is invalid"
+ }
+ },
"TAP": {
"AccessRequirements": {
"infoText": "Configure the PIN and credential requirements that users must meet to access apps in a work context."
@@ -1311,393 +3937,193 @@
"selectOne": "Select at least one app to create a policy."
}
},
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "CoManagementAuthority": {
- "Confirmation": {
- "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
- "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
- },
- "Grid": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
- "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
- "label": "Co-management authority"
- },
- "Header": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
- },
- "Main": {
- "title": "Co-management Authority"
- },
- "MessageSaved": {
- "body": "Co-management authority policy created."
- },
- "Notification": {
- "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
- "created": "This Co-management authority policy has not been assigned to any users.",
- "creating": "Creating Co-management authority policy",
- "creatingMessage": "Creating {0} Co-management authority policy",
- "deleteError": "An error occurred while deleting Co-management authority policy",
- "deleted": "Co-management authority policy deleted.",
- "deletedMessage": "{0} Co-management authority policy is deleted.",
- "deleting": "Deleting Co-management Authority policy",
- "deletingMessage": "Deleting {0} Co-management Authority policy",
- "fetchError": "An error occurred while displaying Co-management authority policies",
- "saved": "Co-management Authority saved.",
- "savedMessage": "{0} Co-management Authority policy successfully saved.",
- "saving": "Saving Co-management authority",
- "savingMessage": "Saving {0} Co-management authority policy"
- },
- "Priority": {
- "saveError": "An error occurred while saving Co-management authority priorities",
- "saved": "Co-management authority priorities were successfully saved."
- },
- "ReloadNotification": {
- "description": "Reload the Co-management authority policy to try again.",
- "title": "Reload the Co-management authority blade"
- },
- "advancedProperty": "Advanced",
- "commandLineArgs": "Client installation command line arguments.",
- "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
- "enterArgument": "Enter argument",
- "installAgent": "Automatically install Configuration Manager agent.",
- "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
- "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
- "pageDescription": "Co-management authority profiles",
- "pageSetting": "Co-management authority Setting",
- "pageTitle": "Co-management authority",
- "settingDescription": "The co-management settings determine who owns the workloads."
- },
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "webApp": "Web link",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "TAPSettings": {
- "AllowedDataIngestionLocations": {
- "label": "Allow users to open data from selected services",
- "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
- },
- "AndroidBackup": {
- "label": "Backup org data to Android backup services",
- "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender for Endpoint",
+ "androidDeviceOwnerApplications": "Applications",
+ "androidDeviceOwnerPolicyMessages": "Custom support information",
+ "androidForWorkPassword": "Device password",
+ "appManagement": "Allow or Block apps",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Restricted Apps",
+ "applicationVisibility": "Show or Hide Apps",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, Doc Viewing, Gaming",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Apps and experience",
+ "associatedDomains": "Associated domains",
+ "autonomousSingleAppMode": "Autonomous Single App Mode",
+ "azureOperationalInsights": "Azure operational insights",
+ "bitLocker": "Windows Encryption",
+ "bootOptions": "Boot options",
+ "browser": "Browser",
+ "builtinApps": "Built-in apps",
+ "cameras": "Cameras",
+ "cellular": "Cellular",
+ "cloudAndStorage": "Cloud and Storage",
+ "cloudPrint": "Cloud Printer",
+ "complianceEmailProfile": "Email",
+ "connectedDevices": "Connected devices",
+ "connectivity": "Cellular and connectivity",
+ "contentCaching": "Content caching",
+ "controlPanelAndSettings": "Control Panel and Settings",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Custom Compliance",
+ "customConfiguration": "Custom Configuration Profile",
+ "customOMASettings": "Custom OMA-URI Settings",
+ "customPreferences": "Preference file",
+ "dFCISecuritySettings": "Security settings",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows Firewall",
+ "defenderLocalSecurityOptions": "Local device security options",
+ "defenderSecurityCenter": "Microsoft Defender Security Center",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedCredentialAuthenticationConfiguration": "Derived credential",
+ "deviceExperience": "Device experience",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Microsoft Defender Application Control",
+ "deviceHealth": "Device Health",
+ "devicePassword": "Device password",
+ "deviceProperties": "Device Properties",
+ "deviceRestrictions": "General",
+ "deviceSecurity": "System security",
+ "display": "Display",
+ "domainJoin": "Domain Join",
+ "domains": "Domains",
+ "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge kiosk mode",
+ "editionUpgrade": "Edition Upgrade",
+ "education": "Education",
+ "educationDeviceCerts": "Device certificates",
+ "educationStudentCerts": "Student certificates",
+ "educationTakeATest": "Take a Test",
+ "educationTeacherCerts": "Teacher certificates",
+ "emailProfile": "Email",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Single sign-on app extension",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Games",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Health monitoring",
+ "homeScreenLayout": "Home Screen Layout",
+ "iOSWallpaper": "Wallpaper",
+ "importedPFX": "PKCS Imported Certificate",
+ "iosDefenderAtp": "Microsoft Defender for Endpoint",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Kernel extensions",
+ "keyboardAndDictionary": "Keyboard and dictionary",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Dedicated devices",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Kiosk web browser",
+ "lockScreenMessage": "Lock Screen Message",
+ "lockedScreenExperience": "Locked Screen Experience",
+ "logging": "Reporting and Telemetry",
+ "loginItems": "Login items",
+ "loginWindow": "Login window",
+ "macDefenderAtp": "Microsoft Defender for Endpoint",
+ "maintenance": "Maintenance",
+ "malware": "Malware",
+ "messaging": "Messaging",
+ "microphonesAndSpeakers": "Microphones and speakers",
+ "networkBoundary": "Network boundary",
+ "networkProxy": "Network proxy",
+ "notifications": "App Notifications",
+ "pKCS": "PKCS Certificate",
+ "password": "Password",
+ "personalProfile": "Personal profile",
+ "personalization": "Personalization",
+ "policyOverride": "Override Group Policy",
+ "ports": "Ports",
+ "powerSettings": "Power Settings",
+ "printer": "Printer",
+ "privacy": "Privacy",
+ "privacyPerApp": "Per-app privacy exceptions",
+ "privacyPreferences": "Privacy preferences",
+ "projection": "Projection",
+ "radios": "Radios",
+ "sCCMCompliance": "Configuration Manager Compliance",
+ "sCEP": "SCEP Certificate",
+ "sCEPProperties": "SCEP Certificate",
+ "sMode": "Mode switch (Windows Insider only)",
+ "safari": "Safari",
+ "search": "Search",
+ "session": "Session",
+ "sharedDevice": "Shared iPad",
+ "sharedPCAccountManager": "Shared multi-user device",
+ "singleSignOn": "Single sign-on",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Settings",
+ "start": "Start",
+ "systemExtensions": "System extensions",
+ "systemSecurity": "System Security",
+ "trustedCert": "Trusted Certificate",
+ "uEFIAccess": "UEFI access",
+ "updates": "Updates",
+ "userRights": "User Rights",
+ "usersAndAccounts": "Users and Accounts",
+ "vPN": "Base VPN",
+ "vPNApps": "Automatic VPN",
+ "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
+ "vPNConditionalAccess": "Conditional Access",
+ "vPNConnectivity": "Connectivity",
+ "vPNDNSTriggers": "DNS Settings",
+ "vPNIKEv2": "IKEv2 settings",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Split Tunneling",
+ "vPNTrustedNetwork": "Trusted Network Detection",
+ "wakeSettings": "Wake settings",
+ "webContentFilter": "Web Content Filter",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender for Endpoint",
+ "windowsDefenderATP": "Microsoft Defender for Endpoint",
+ "windowsHelloForBusiness": "Windows Hello for Business",
+ "windowsSpotlight": "Windows Spotlight",
+ "wiredNetwork": "Wired network",
+ "wireless": "Wireless",
+ "wirelessProjection": "Wireless projection",
+ "workProfile": "Work profile settings",
+ "workProfilePassword": "Work profile password",
+ "xboxServices": "Xbox services",
+ "zebraMx": "MX profile (Zebra only)",
+ "complianceActionsLabel": "Actions for noncompliance"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Allowed URLs",
+ "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
},
- "AndroidBiometricAuthentication": {
- "label": "Biometrics instead of PIN for access",
- "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
- },
- "AndroidFingerprint": {
- "label": "Fingerprint instead of PIN for access (Android 6.0+)",
- "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
- },
- "AndroidOverrideFingerprint": {
- "label": "Override biometrics with PIN after timeout"
- },
- "AppPIN": {
- "label": "App PIN when device PIN is set",
- "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
- },
- "BlockDataIngestionIntoOrganizationDocuments": {
- "label": "Open data into Org documents",
- "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
- "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
- "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
- "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
- },
- "ConnectToVpnOnLaunch": {
- "label": "Start Microsoft Tunnel connection on app-launch",
- "tooltip": "Allow connection to VPN when app is launch"
- },
- "CredentialsForAccess": {
- "label": "Work or school account credentials for access",
- "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
- },
- "CustomBrowserDisplayName": {
- "label": "Unmanaged Browser Name",
- "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
- },
- "CustomBrowserPackageId": {
- "label": "Unmanaged Browser ID",
- "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
- },
- "CustomBrowserProtocol": {
- "label": "Unmanaged browser protocol",
- "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
- },
- "DialerRestrictionLevel": {
- "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
- "label": "Transfer telecommunication data to",
- "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "EncryptData": {
- "label": "Encrypt org data",
- "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
- },
- "EncryptDataAndroid": {
- "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
- },
- "EncryptDataIos": {
- "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 128-bit AES encryption to app data.",
- "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
- "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
- },
- "EncryptDataOnEnrolledDevices": {
- "label": "Encrypt org data on enrolled devices",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
- },
- "IOSBackup": {
- "label": "Backup org data to iTunes and iCloud backups",
- "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
- },
- "IOSFaceID": {
- "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
- "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
- },
- "IOSOverrideTouchId": {
- "label": "Override biometrics with PIN after timeout"
- },
- "IOSTouchId": {
- "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
- "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
- },
- "MessagingRedirectAppDisplayName": {
- "label": "Messaging App Name"
- },
- "MessagingRedirectAppPackageId": {
- "label": "Messaging App Package ID"
+ "ApplicationProxyRedirection": {
+ "header": "Application proxy",
+ "title": "Application proxy redirection",
+ "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
},
- "MessagingRedirectAppUrlScheme": {
- "label": "Messaging App URL Scheme"
- },
- "NotificationRestriction": {
- "label": "Org data notifications",
- "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
- },
- "OpenLinksManagedBrowser": {
- "label": "Restrict web content transfer with other apps",
- "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
- },
- "OverrideBiometric": {
- "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
- },
- "PinAccess": {
- "label": "PIN for access",
- "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
- },
- "PinLength": {
- "label": "Select minimum PIN length",
- "tooltip": "This setting specifies the minimum number of digits of a PIN."
- },
- "PinType": {
- "label": "PIN type",
- "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
- },
- "Printing": {
- "label": "Printing org data",
- "tooltip": "If blocked, the app cannot print protected data."
- },
- "ProtectedMessagingRedirectAppType": {
- "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
- "label": "Transfer messaging data to",
- "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "ReceiveData": {
- "label": "Receive data from other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ "BlockedURLs": {
+ "title": "Blocked URLs",
+ "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
+ },
+ "Bookmarks": {
+ "header": "Managed bookmarks",
+ "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
+ "uRL": "URL"
},
- "RecheckAccessAfter": {
- "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
- "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
- },
- "RequireClass3Biometrics": {
- "label": "Class 3 Biometrics (Android 9.0+)",
- "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
- },
- "RequirePinAfterBiometricChange": {
- "label": "Override Biometrics with PIN after biometric updates",
- "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
- },
- "RestrictKeyboards": {
- "duplicatePackageError": "The package ID must be unique.",
- "invalidPackageError": "Invalid package ID",
- "label": "Approved keyboards",
- "select": "Select keyboards to approve",
- "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
- "title": "Add approved keyboards",
- "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
- },
- "SaveData": {
- "label": "Save copies of org data",
- "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
- },
- "SaveDataToSelected": {
- "label": "Allow user to save copies to selected services",
- "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
- },
- "ScreenCaptureAndAndroidAssistant": {
- "label": "Screen capture and Google Assistant\n",
- "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
- },
- "SendData": {
- "label": "Send org data to other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
- },
- "SimplePin": {
- "label": "Simple PIN",
- "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
- },
- "SyncContacts": {
- "label": "Sync policy managed app data with native apps or add-ins"
- },
- "ThirdPartyKeyboards": {
- "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
- "label": "Third party keyboards"
- },
- "Timeout": {
- "label": "Timeout (minutes of inactivity)"
- },
- "WinCutCopyPaste": {
- "label": "Allow cut, copy, and paste for",
- "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
- },
- "WinPrintData": {
- "label": "Print org data",
- "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
- },
- "WinReceiveData": {
- "label": "Receive data from",
- "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
- },
- "WinSendData": {
- "label": "Send org data to",
- "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
- },
- "Tap": {
- "numberOfDays": "Number of days",
- "pinResetAfterNumberOfDays": "PIN reset after number of days",
- "previousPinBlockCount": "Select number of previous PIN values to maintain"
- }
- },
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "One block action is required for all compliance policies.",
- "graceperiod": "Schedule (days after noncompliance)",
- "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
- "subtitle": "Specify action parameters",
- "title": "Action parameters"
- },
- "List": {
- "gracePeriodDay": "{0} day after noncompliance",
- "gracePeriodDays": "{0} days after noncompliance",
- "gracePeriodHour": "{0} hour after noncompliance",
- "gracePeriodHours": "{0} hours after noncompliance",
- "gracePeriodMinute": "{0} minute after noncompliance",
- "gracePeriodMinutes": "{0} minutes after noncompliance",
- "immediately": "Immediately",
- "schedule": "Schedule",
- "scheduleInfoBalloon": "Days after noncompliance",
- "subtitle": "Specify the sequence of actions on noncompliant devices",
- "title": "Actions"
- },
- "Notification": {
- "additionalEmailLabel": "Others",
- "additionalRecipients": "Additional recipients (via email)",
- "additionalRecipientsBladeTitle": "Select additional recipients",
- "emailAddressPrompt": "Enter email addresses (separated by commas)",
- "invalidEmail": "Invalid email address",
- "messageTemplate": "Message template",
- "noneSelected": "None selected",
- "notSelected": "Not selected",
- "numSelected": "{0} selected",
- "selected": "Selected"
- },
- "block": "Mark device noncompliant",
- "lockDevice": "Lock device (local action)",
- "lockDeviceWithPasscode": "Lock device (local action)",
- "noAction": "No action",
- "noActionRow": "No actions, select 'Add' to add an action",
- "pushNotification": "Send push notification to end user",
- "remoteLock": "Remotely lock the noncompliant device",
- "removeSourceAccessProfile": "Remove source access profile",
- "retire": "Add device to retire list",
- "wipe": "Wipe",
- "emailNotification": "Send email to end user"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "required": "Required",
- "uninstall": "Uninstall"
+ "HomepageURL": {
+ "header": "Managed homepage",
+ "title": "Homepage shortcut URL",
+ "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Redirect restricted sites to personal context",
+ "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
+ }
},
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Create custom script",
- "edit": "Edit custom script"
- },
- "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
- "customScriptCapitalized": "Custom script",
- "customScriptLowercase": "custom script",
- "detectionScript": "Detection script"
- },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home Sku",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Select the number of bits contained in the key.",
- "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
- "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
- "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
- "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Subject alternative name",
- "subjectNameFormat": "Subject name format",
- "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
- },
- "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
- "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
- "configurationSettingsFormat": "Configuration settings format text",
- "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
- "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
- "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
- "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Select runtime permissions for the associated app.",
- "policyAssociatedApp": "Select the app that this policy will be associated with.",
- "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
- "policyDescription": "Optionally, enter a description for this configuration policy.",
- "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
- "policyName": "Enter a name for this configuration policy.",
- "policyPlatform": "Select the platform this app configuration policy will apply to.",
- "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
- "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
- "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
- "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
- "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
- "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
- "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
- "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
- "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
- "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
- "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
- "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
- },
+ "Languages": {
+ "ar-aE": "Arabic (U.A.E.)",
+ "ar-bH": "Arabic (Bahrain)",
+ "ar-dZ": "Arabic (Algeria)",
+ "ar-eG": "Arabic (Egypt)",
+ "ar-iQ": "Arabic (Iraq)",
+ "ar-jO": "Arabic (Jordan)",
+ "ar-kW": "Arabic (Kuwait)",
+ "ar-lB": "Arabic (Lebanon)",
+ "ar-lY": "Arabic (Libya)",
+ "ar-mA": "Arabic (Morocco)",
+ "ar-oM": "Arabic (Oman)",
+ "ar-qA": "Arabic (Qatar)",
+ "ar-sA": "Arabic (Saudi Arabia)",
+ "ar-sY": "Arabic (Syria)",
+ "ar-tN": "Arabic (Tunisia)",
+ "ar-yE": "Arabic (Yemen)",
+ "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
+ "az-latn": "Azerbaijani (Latin, Azerbaijan)",
+ "bn-bD": "Bangla (Bangladesh)",
+ "bn-iN": "Bangla (India)",
+ "bs-cyrl": "Bosnian (Cyrillic)",
+ "bs-latn": "Bosnian (Latin)",
+ "zh-cN": "Chinese (PRC)",
+ "zh-hK": "Chinese (Hong Kong S.A.R.)",
+ "zh-mO": "Chinese (Macao S.A.R.)",
+ "zh-sG": "Chinese (Singapore)",
+ "zh-tW": "Chinese (Taiwan)",
+ "hr-bA": "Croatian (Latin)",
+ "hr-hR": "Croatian (Croatia)",
+ "nl-bE": "Dutch (Belgium)",
+ "nl-nL": "Dutch (Netherlands)",
+ "en-aU": "English (Australia)",
+ "en-bZ": "English (Belize)",
+ "en-cA": "English (Canada)",
+ "en-cabn": "English (Caribbean)",
+ "en-iE": "English (Ireland)",
+ "en-iN": "English (India)",
+ "en-jM": "English (Jamaica)",
+ "en-mY": "English (Malaysia)",
+ "en-nZ": "English (New Zealand)",
+ "en-pH": "English (Republic of the Philippines)",
+ "en-sG": "English (Singapore)",
+ "en-tT": "English (Trinidad and Tobago)",
+ "en-uK": "English (United Kingdom)",
+ "en-uS": "English (United States)",
+ "en-zA": "English (South Africa)",
+ "en-zW": "English (Zimbabwe)",
+ "fr-bE": "French (Belgium)",
+ "fr-cA": "French (Canada)",
+ "fr-cH": "French (Switzerland)",
+ "fr-fR": "French (France)",
+ "fr-lU": "French (Luxembourg)",
+ "fr-mC": "French (Monaco)",
+ "de-aT": "German (Austria)",
+ "de-cH": "German (Switzerland)",
+ "de-dE": "German (Germany)",
+ "de-lI": "German (Liechtenstein)",
+ "de-lU": "German (Luxembourg)",
+ "iu-cans": "Inuktitut (Syllabics, Canada)",
+ "iu-latn": "Inuktitut (Latin, Canada)",
+ "it-cH": "Italian (Switzerland)",
+ "it-iT": "Italian (Italy)",
+ "ms-bN": "Malay (Brunei Darussalam)",
+ "ms-mY": "Malay (Malaysia)",
+ "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
+ "mn-mN": "Mongolian (Cyrillic, Mongolia)",
+ "no-nB": "Norwegian, Bokmål (Norway)",
+ "no-nn": "Norwegian, Nynorsk (Norway)",
+ "pt-bR": "Portuguese (Brazil)",
+ "pt-pT": "Portuguese (Portugal)",
+ "quz-bO": "Quechua (Bolivia)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Peru)",
+ "smj-nO": "Sami, Lule (Norway)",
+ "smj-sE": "Sami, Lule (Sweden)",
+ "se-fI": "Sami, Northern (Finland)",
+ "se-nO": "Sami, Northern (Norway)",
+ "se-sE": "Sami, Northern (Sweden)",
+ "sma-nO": "Sami, Southern (Norway)",
+ "sma-sE": "Sami, Southern (Sweden)",
+ "smn": "Sami, Inari (Finland)",
+ "sms": "Sami, Skolt (Finland)",
+ "sr-Cyrl-bA": "Serbian (Cyrillic)",
+ "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
+ "sr-Latn-bA": "Serbian (Latin)",
+ "sr-Latn-rS": "Serbian (Latin, Serbia)",
+ "dsb": "Lower Sorbian (Germany)",
+ "hsb": "Upper Sorbian (Germany)",
+ "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
+ "es-aR": "Spanish (Argentina)",
+ "es-bO": "Spanish (Bolivia)",
+ "es-cL": "Spanish (Chile)",
+ "es-cO": "Spanish (Colombia)",
+ "es-cR": "Spanish (Costa Rica)",
+ "es-dO": "Spanish (Dominican Republic)",
+ "es-eC": "Spanish (Ecuador)",
+ "es-eS": "Spanish (Spain)",
+ "es-gT": "Spanish (Guatemala)",
+ "es-hN": "Spanish (Honduras)",
+ "es-mX": "Spanish (Mexico)",
+ "es-nI": "Spanish (Nicaragua)",
+ "es-pA": "Spanish (Panama)",
+ "es-pE": "Spanish (Peru)",
+ "es-pR": "Spanish (Puerto Rico)",
+ "es-pY": "Spanish (Paraguay)",
+ "es-sV": "Spanish (El Salvador)",
+ "es-uS": "Spanish (United States)",
+ "es-uY": "Spanish (Uruguay)",
+ "es-vE": "Spanish (Venezuela)",
+ "sv-fI": "Swedish (Finland)",
+ "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
+ "uz-latn": "Uzbek (Latin, Uzbekistan)",
+ "af": "Afrikaans (South Africa)",
+ "sq": "Albanian (Albania)",
+ "am": "Amharic (Ethiopia)",
+ "hy": "Armenian (Armenia)",
+ "as": "Assamese (India)",
+ "ba": "Bashkir (Russia)",
+ "eu": "Basque (Basque)",
+ "be": "Belarusian (Belarus)",
+ "br": "Breton (France)",
+ "bg": "Bulgarian (Bulgaria)",
+ "ca": "Catalan (Catalan)",
+ "co": "Corsican (France)",
+ "cs": "Czech (Czech Republic)",
+ "da": "Danish (Denmark)",
+ "dv": "Divehi (Maldives)",
+ "et": "Estonian (Estonia)",
+ "fo": "Faroese (Faroe Islands)",
+ "fil": "Filipino (Philippines)",
+ "fi": "Finnish (Finland)",
+ "gl": "Galician (Galician)",
+ "ka": "Georgian (Georgia)",
+ "el": "Greek (Greece)",
+ "gu": "Gujarati (India)",
+ "ha": "Hausa (Latin, Nigeria)",
+ "he": "Hebrew (Israel)",
+ "hi": "Hindi (India)",
+ "hu": "Hungarian (Hungary)",
+ "is": "Icelandic (Iceland)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonesian (Indonesia)",
+ "ga": "Irish (Ireland)",
+ "xh": "isiXhosa (South Africa)",
+ "zu": "isiZulu (South Africa)",
+ "ja": "Japanese (Japan)",
+ "kn": "Kannada (India)",
+ "kk": "Kazakh (Kazakhstan)",
+ "km": "Khmer (Cambodia)",
+ "rw": "Kinyarwanda (Rwanda)",
+ "sw": "Kiswahili (Kenya)",
+ "kok": "Konkani (India)",
+ "ko": "Korean (Korea)",
+ "ky": "Kyrgyz (Kyrgyzstan)",
+ "lo": "Lao (Lao P.D.R.)",
+ "lv": "Latvian (Latvia)",
+ "lt": "Lithuanian (Lithuania)",
+ "lb": "Luxembourgish (Luxembourg)",
+ "mk": "Macedonian (North Macedonia)",
+ "ml": "Malayalam (India)",
+ "mt": "Maltese (Malta)",
+ "mi": "Maori (New Zealand)",
+ "mr": "Marathi (India)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepali (Nepal)",
+ "oc": "Occitan (France)",
+ "or": "Odia (India)",
+ "ps": "Pashto (Afghanistan)",
+ "fa": "Persian",
+ "pl": "Polish (Poland)",
+ "pa": "Punjabi (India)",
+ "ro": "Romanian (Romania)",
+ "rm": "Romansh (Switzerland)",
+ "ru": "Russian (Russia)",
+ "sa": "Sanskrit (India)",
+ "st": "Sesotho sa Leboa (South Africa)",
+ "tn": "Setswana (South Africa)",
+ "si": "Sinhala (Sri Lanka)",
+ "sk": "Slovak (Slovakia)",
+ "sl": "Slovenian (Slovenia)",
+ "sv": "Swedish (Sweden)",
+ "syr": "Syriac (Syria)",
+ "tg": "Tajik (Cyrillic, Tajikistan)",
+ "ta": "Tamil (India)",
+ "tt": "Tatar (Russia)",
+ "te": "Telugu (India)",
+ "th": "Thai (Thailand)",
+ "bo": "Tibetan (PRC)",
+ "tr": "Turkish (Turkey)",
+ "tk": "Turkmen (Turkmenistan)",
+ "uk": "Ukrainian (Ukraine)",
+ "ur": "Urdu (Islamic Republic of Pakistan)",
+ "vi": "Vietnamese (Vietnam)",
+ "cy": "Welsh (United Kingdom)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (PRC)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Built-in Role",
+ "customCloudPCRole": "Custom Windows 365 role",
+ "customIntuneRole": "Custom Intune role",
+ "customRole": "Custom Role"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "App Version",
+ "dependencyName": "Dependency name",
+ "lastModifiedTime": "Last modified time",
+ "relationship": "Relationship",
+ "replaced": "Replaced",
+ "searchPlaceholder": "Filter by app name",
+ "status": "Status details",
+ "statusDetails": "Status",
+ "supersedenceName": "Supersedence name"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Child dependency",
+ "indirectSupersedence": "Not directly related",
+ "supersedenceAncestors": "Superseding",
+ "supersedenceDescendants": "Superseded"
+ },
+ "SupersededReplaced": {
+ "no": "No",
+ "yes": "Yes"
+ },
+ "Tabs": {
+ "chart": "Chart",
+ "dependency": "Dependency",
+ "label": "View: ",
+ "supersedence": "Supersedence",
+ "table": "Table"
+ },
+ "dependencyGraphAriaLabel": "App dependency chart",
+ "supersedenceGraphAriaLabel": "App supersedence chart"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Number of days to wait before restart is enforced"
+ },
+ "Description": {
+ "label": "Description"
+ },
+ "Name": {
+ "label": "Name"
+ },
+ "QualityUpdateRelease": {
+ "label": "Expedite installation of quality updates if device OS version less than:"
+ },
+ "bladeTitle": "Quality updates Windows 10 and later (preview)",
+ "loadError": "Loading failed!"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Settings"
+ },
+ "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
+ "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
+ "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ },
+ "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
+ "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
+ "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
+ "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
+ "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
+ "appSharingToLevel3": "{0}: Allow sending org data to any app",
+ "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
+ "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
+ "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
+ "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
+ "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
+ "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
+ "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
+ "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
+ "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
+ "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
+ "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
+ "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
+ "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
+ "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
+ "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
+ "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
+ "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
+ "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
+ "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
+ "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
+ "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
+ "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
+ "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
+ "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
+ "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
+ "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
+ "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
+ "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
+ "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
+ "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
+ "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
+ "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
+ "checkInput": "Check input for validity",
+ "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
+ "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
+ "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
+ "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
+ "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
+ "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
+ "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
+ "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
+ "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
+ "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
+ "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
+ "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
+ "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
+ "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
+ "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
+ "name": "The name of this network boundary",
+ "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
+ "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
+ "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
+ "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
+ "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
+ "protectUnderLock": "Protects app content while the device is in a locked state.",
+ "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
+ "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
+ "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
+ "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
+ "required": "Required",
+ "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
+ "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
+ "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
+ "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
+ "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ },
+ "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Create custom script",
+ "edit": "Edit custom script"
+ },
+ "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
+ "customScriptCapitalized": "Custom script",
+ "customScriptLowercase": "custom script",
+ "detectionScript": "Detection script"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Default",
+ "header": "Update Priority",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Auto-update",
+ "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Allow user to snooze the restart notification",
+ "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
+ "durationInMinutes": "Device restart grace period (minutes)",
+ "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Time zone",
+ "local": "Device time zone",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Date and time",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
+ "deadlineTimeLabel": "App installation deadline",
+ "defaultTime": "As soon as possible",
+ "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
+ "specificTime": "A specific date and time",
+ "startTimeColumnLabel": "Availability",
+ "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
+ "startTimeLabel": "App availability"
+ },
+ "restartGracePeriodHeader": "Restart grace period",
+ "restartGracePeriodLabel": "Device restart grace period",
+ "summaryTitle": "End user experience"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Assign custom attribute to at least one group. Go to Properties to edit assignments.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Shell script",
"successfullySavedPolicy": "Saved {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64-bit",
+ "thirtyTwoBit": "32-bit"
+ },
+ "Countries": {
+ "ae": "United Arab Emirates",
+ "ag": "Antigua and Barbuda",
+ "ai": "Anguilla",
+ "al": "Albania",
+ "am": "Armenia",
+ "ao": "Angola",
+ "ar": "Argentina",
+ "at": "Austria",
+ "au": "Australia",
+ "az": "Azerbaijan",
+ "bb": "Barbados",
+ "be": "Belgium",
+ "bf": "Burkina Faso",
+ "bg": "Bulgaria",
+ "bh": "Bahrain",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolivia",
+ "br": "Brazil",
+ "bs": "Bahamas",
+ "bt": "Bhutan",
+ "bw": "Botswana",
+ "by": "Belarus",
+ "bz": "Belize",
+ "ca": "Canada",
+ "cg": "Republic Of Congo",
+ "ch": "Switzerland",
+ "cl": "Chile",
+ "cn": "China",
+ "co": "Colombia",
+ "cr": "Costa Rica",
+ "cv": "Cape Verde",
+ "cy": "Cyprus",
+ "cz": "Czech Republic",
+ "de": "Germany",
+ "dk": "Denmark",
+ "dm": "Dominica",
+ "do": "Dominican Republic",
+ "dz": "Algeria",
+ "ec": "Ecuador",
+ "ee": "Estonia",
+ "eg": "Egypt",
+ "es": "Spain",
+ "fi": "Finland",
+ "fj": "Fiji",
+ "fm": "Federated States Of Micronesia",
+ "fr": "France",
+ "gb": "United Kingdom",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Greece",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hong Kong",
+ "hn": "Honduras",
+ "hr": "Croatia",
+ "hu": "Hungary",
+ "id": "Indonesia",
+ "ie": "Ireland",
+ "il": "Israel",
+ "in": "India",
+ "is": "Iceland",
+ "it": "Italy",
+ "jm": "Jamaica",
+ "jo": "Jordan",
+ "jp": "Japan",
+ "ke": "Kenya",
+ "kg": "Kyrgyzstan",
+ "kh": "Cambodia",
+ "kn": "St. Kitts and Nevis",
+ "kr": "Republic Of Korea",
+ "kw": "Kuwait",
+ "ky": "Cayman Islands",
+ "kz": "Kazakstan",
+ "la": "Lao People’s Democratic Republic",
+ "lb": "Lebanon",
+ "lc": "St. Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Lithuania",
+ "lu": "Luxembourg",
+ "lv": "Latvia",
+ "md": "Republic Of Moldova",
+ "mg": "Madagascar",
+ "mk": "North Macedonia",
+ "ml": "Mali",
+ "mn": "Mongolia",
+ "mo": "Macau",
+ "mr": "Mauritania",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Mexico",
+ "my": "Malaysia",
+ "mz": "Mozambique",
+ "na": "Namibia",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Netherlands",
+ "no": "Norway",
+ "np": "Nepal",
+ "nz": "New Zealand",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua New Guinea",
+ "ph": "Philippines",
+ "pk": "Pakistan",
+ "pl": "Poland",
+ "pt": "Portugal",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Romania",
+ "ru": "Russia",
+ "sa": "Saudi Arabia",
+ "sb": "Solomon Islands",
+ "sc": "Seychelles",
+ "se": "Sweden",
+ "sg": "Singapore",
+ "si": "Slovenia",
+ "sk": "Slovakia",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Suriname",
+ "st": "Sao Tome and Principe",
+ "sv": "El Salvador",
+ "sz": "Swaziland",
+ "tc": "Turks and Caicos",
+ "td": "Chad",
+ "th": "Thailand",
+ "tj": "Tajikistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunisia",
+ "tr": "Turkey",
+ "tt": "Trinidad and Tobago",
+ "tw": "Taiwan",
+ "tz": "Tanzania",
+ "ua": "Ukraine",
+ "ug": "Uganda",
+ "us": "United States",
+ "uy": "Uruguay",
+ "uz": "Uzbekistan",
+ "vc": "St. Vincent and The Grenadines",
+ "ve": "Venezuela",
+ "vg": "British Virgin Islands",
+ "vn": "Vietnam",
+ "ye": "Yemen",
+ "za": "South Africa",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "This setting is not configurable via OMA-URI, as it is available in the settings catalog. Please navigate to the settings catalog to configure this setting."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Select a configuration profile file"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "These settings work for devices that were enrolled with or without user approval through device enrollment, and for devices enrolled with automated device enrollment (formerly DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Device enrollment and automated device enrollment",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Device enrollment and automated device enrollment",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
+ "deviceExperienceTypeDescription": "Based on the experience you want to configure, select Kiosk Mode or Microsoft Launcher to start configuring the experience on your devices. If you don't select a device experience type, users will see the device's default home screen experience.",
+ "deviceExperienceTypeKioskMode": "Kiosk mode (dedicated and fully managed)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft launcher (fully managed only)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Show",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
+ "deviceExperienceTypeName": "Device experience type",
"deviceGuardCredentialGuardDescription": "Enabling with UEFI lock ensures that Credential Guard cannot be remotely disabled. Enabling without UEFI lock allows Credential Guard to be disabled remotely via Group Policy.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune Device ID",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Number of days before transitioning from Auto Restarts scheduled outside of active hours to Engaged Restart, which requires the user to schedule.",
"engagedRestartTransitionScheduleName": "Transition users to engaged restart after an auto-restart (days)",
"enhancedOption": "Enhanced (1903 and earlier)",
- "enrollmentProfileTypeDedicatedDevice": "Dedicated device",
- "enrollmentProfileTypeDescription": "Select an enrollment profile type to start configuring Microsoft Launcher or Microsoft Managed Home Screen on your devices. If you don't select a profile type, users will see the device's default home screen experience.",
- "enrollmentProfileTypeFullyManaged": "Fully managed",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Show",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
- "enrollmentProfileTypeName": "Enrollment profile type",
"enrollmentSettingsHeading": "Enrollment Settings",
"enterOnlyOneForDns": "Enter a list of DNS servers and/or a proxy server.",
"enterpriseModeLoggingExample": "e.g. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Fully managed and corporate-owned work profile devices",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "These settings only work for fully managed and dedicated devices.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Fully managed and dedicated devices",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "These settings only work for fully managed and dedicated devices operating with a kiosk policy.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Fully managed and dedicated devices (kiosk mode only)",
"gameCenterBlockedMacDescription": "Yes disables Game Center, and the Game Center icon is removed from the Home screen. Available for devices running macOS versions 10.13 or later.",
"gameCenterBlockedMacName": "Block Game Center",
"gamingPageDescription": "Block access to Gaming in Settings app.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Configures the logon type to access the applications on this kiosk device.",
"kioskShowTaskbarDesc": "Show or hide the Windows taskbar on the kiosk.",
"kioskShowTaskbarName": "Windows Taskbar",
+ "kioskSingleInfoBoxText": "Single app kiosk mode – Locks the device to run the selected app. To use this mode, you must first approve and assign the selected app from the client apps workload. On fully managed devices, the only selected app that will apply is Managed Home Screen. All other apps will be treated as a required app instead.",
"kioskStartDateTime": "Maintenance Window Start Time",
"kioskStartMenuLayoutXmlDesc": "Provide an XML layout that defines in what order apps should be displayed on the Start Menu",
"kioskStartMenuLayoutXmlDescV2": "Importing an XML file configuring the Start layout overrides the existing display order and tile size selections. Learn more",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Must be a valid file path",
"mustBeAValidHttpsUrl": "Must be a valid https url",
"mustBeAValidIPAddress": "Must be a valid IP address (e.g. 192.168.0.1 or 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Value must be a valid IP address or FQDN with optional port number.",
"mustBeAValidIPv4Address": "Must be a valid IPv4 address (e.g. 192.168.0.1)",
"mustBeAValidIPv6Address": "Must be a valid IPv6 address (e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Must be a valid image URL such as www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Windows Firewall rules from the local store (Public networks)",
"publicNetworkName": "Public (non-discoverable) network",
"publicOutboundConnectionsSummaryLabel": "Default action for outbound connections (Public networks)",
- "publicPlayStoreEnabledDescription": "Users get access to all apps, except the ones you’ve required uninstall in Client Apps. If you choose \"Not configured\" for this setting, users can only access the apps you’ve listed as available or required in Client Apps.",
+ "publicPlayStoreEnabledDescription": "If you select \"Allow\", users get access to all apps, except the ones you've required uninstall in Client Apps. If you choose \"Block\" or \"Not configured\" for this setting, users can only access the apps you've listed as available or required in Client Apps.",
"publicPlayStoreEnabledName": "Allow access to all apps in Google Play store",
- "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Not configured\", all apps not explicitly allowed for the user will be removed from the device.",
+ "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Block\" or \"Not configured\", all apps will be removed from the device, except apps you've listed as available or required in Client Apps.",
+ "publicPlayStoreSelectionAllowList": "Block",
+ "publicPlayStoreSelectionBlockList": "Allow",
+ "publicPlayStoreSelectionNotConfigured": "Not configured",
"publicShieldedSummaryLabel": "Shielded (Public networks)",
"publicStealthModeSummaryLabel": "Stealth mode (Public networks)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Unicast responses to multicast broadcasts (Public networks)",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Device",
"licenseTypeUser": "User"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Property",
- "rule": "Rule",
- "ruleDetails": "Rule Details",
- "value": "Value"
- },
- "assignIf": "Assign profile if",
- "deleteWarning": "This will delete the selected Applicability Rule",
- "dontAssignIf": "Don't assign profile if",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "and {0} more",
- "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
- "maxText": "Max",
- "minText": "Min",
- "noActionRow": "No Applicability Rules Specified",
- "oSVersion": "e.g. 1.2.3.4",
- "toText": "to",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "OS edition",
- "windows10OsVersion": "OS version",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Equals",
- "greaterThan": "Greater than",
- "greaterThanOrEqualTo": "Greater than or equal to",
- "lessThan": "Less than",
- "lessThanOrEqualTo": "Less than or equal to",
- "notEqualTo": "Not equal to"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Enforce script signature check and run script silently",
- "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
- "header": "Use a custom detection script",
- "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
- "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileNotSelectedValidation": "No script file is selected.",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
- "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Date created",
- "dateModified": "Date modified",
- "doesNotExist": "File or folder does not exist",
- "fileOrFolderExists": "File or folder exists",
- "sizeInMB": "Size in MB",
- "version": "String (version)"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "fileOrFolder": "File or folder",
- "fileOrFolderToolTip": "The file or folder to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "path": "Path",
- "pathTooltip": "The full path of the folder containing the file or folder to detect.",
- "value": "Value",
- "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
- },
- "GridColumns": {
- "pathOrCode": "Path/Code",
- "type": "Type"
- },
- "MsiRule": {
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
- "productCode": "MSI product code",
- "productCodeTooltip": "A valid MSI product code for the app.",
- "productVersion": "Value",
- "productVersionCheck": "MSI product version check",
- "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
- "productVersionTooltip": "Enter the MSI product version for the app."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Integer comparison",
- "keyDoesNotExist": "Key does not exist",
- "keyExists": "Key exists",
- "stringComparison": "String comparison",
- "valueDoesNotExist": "Value does not exist",
- "valueExists": "Value exists",
- "versionComparison": "Version comparison"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "value": "Value",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the registry value to detect.",
- "valueTooltip": "Select a value that matches the selected detection method."
- },
- "RuleTypeOptions": {
- "file": "File",
- "mSI": "MSI",
- "registry": "Registry"
- },
- "gridAriaLabel": "Detection Rules",
- "header": "Create a rule that indicates the presence of the app.",
- "noRulesSelectedPlaceholder": "No rules are specified.",
- "ruleTableLimit": "You can add up to 25 detection rules",
- "ruleType": "Rule type",
- "ruleTypeTooltip": "Choose the type of detection rule to add."
- },
- "RuleConfigurationOptions": {
- "customScript": "Use a custom detection script",
- "manual": "Manually configure detection rules"
- },
- "bladeTitle": "Detection rules",
- "header": "Configure app specific rules used to detect the presence of the app.",
- "rulesFormat": "Rules format",
- "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
- "selectorLabel": "Detection rules"
+ "BooleanActions": {
+ "allow": "Allow",
+ "block": "Block",
+ "configured": "Configured",
+ "disable": "Disable",
+ "dontRequire": "Don't Require",
+ "enable": "Enable",
+ "hide": "Hide",
+ "limit": "Limit",
+ "notConfigured": "Not configured",
+ "require": "Require",
+ "show": "Show",
+ "yes": "Yes"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Endpoint detection and response"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "App and browser isolation",
- "aSRApplicationControl": "Application control",
- "aSRAttackSurfaceReduction": "Attack surface reduction rules",
- "aSRDeviceControl": "Device control",
- "aSRExploitProtection": "Exploit protection",
- "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
- "aVExclusions": "Microsoft Defender Antivirus exclusions",
- "antivirus": "Microsoft Defender Antivirus",
- "cloudPC": "Windows 365 Security Baseline",
- "default": "Endpoint Security",
- "defenderTest": "Microsoft Defender for Endpoint demo",
- "diskEncryption": "BitLocker",
- "eDR": "Endpoint detection and response",
- "edgeSecurityBaseline": "Microsoft Edge baseline",
- "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
- "editionUpgradeConfiguration": "Edition upgrade and mode switch",
- "firewall": "Windows Firewall",
- "firewallRules": "Windows Firewall rules",
- "identityProtection": "Account protection",
- "identityProtectionPreview": "Account protection (preview)",
- "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
- "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
- "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
- "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS firewall",
- "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
- "office365Baseline": "Microsoft Office O365 baseline",
- "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
- "securityBaselines": "Security Baselines",
- "test": "Test Template",
- "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
- "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
- "windowsSecurityExperience": "Windows Security experience"
- },
- "Firewall": {
- "mDE": "Windows Firewall"
- },
- "FirewallRules": {
- "mDE": "Windows Firewall Rules"
- },
- "OneDriveKnownFolderMove": {
- "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Account Protection",
- "administrativeTemplates": "Administrative Templates",
- "androidCompliancePolicy": "Android compliance policy",
- "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
- "applicationControl": "App Control for Business",
- "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
- "bitlocker": "BitLocker",
- "custom": "Custom",
- "deliveryOptimization": "Delivery Optimization",
- "derivedPersonalIdentityVerificationCredential": "Derived credential",
- "deviceControl": "Device Control",
- "deviceFeatures": "Device features",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Device Lock",
- "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
- "deviceRestrictions": "Device restrictions",
- "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
- "domainJoinPreview": "Domain Join",
- "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
- "education": "Education",
- "email": "Email",
- "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
- "endpointProtection": "Endpoint protection",
- "expeditedCheckin": "Mobile device management configuration",
- "exploitProtection": "Exploit Protection",
- "extensions": "Extensions",
- "hardwareConfigurations": "BIOS Configurations and other settings",
- "identityProtection": "Identity protection",
- "iosCompliancePolicy": "iOS compliance policy",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Local user group membership",
- "macCompliancePolicy": "Mac compliance policy",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
- "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
- "microsoftDefenderFirewallRules": "Windows Firewall Rules",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
- "mxProfileZebraOnly": "MX profile (Zebra only)",
- "networkBoundary": "Network boundary",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Override Group Policy",
- "pkcsCertificate": "PKCS certificate",
- "pkcsImportedCertificate": "PKCS imported certificate",
- "preferenceFile": "Preference file",
- "presets": "Presets",
- "scepCertificate": "SCEP certificate",
- "secureAssessmentEducation": "Secure assessment (Education)",
- "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
- "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
- "settingsCatalog": "Settings Catalog",
- "sharedMultiUserDevice": "Shared multi-user device",
- "softwareUpdates": "Software Updates",
- "trustedCertificate": "Trusted certificate",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi import",
- "windows10CompliancePolicy": "Windows 10/11 compliance policy",
- "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
- "windows10XScep": "SCEP certificate - TEST",
- "windows10XTrustedCertificate": "Trusted certificate - TEST",
- "windows10XVPN": "VPN - TEST",
- "windows10XWifi": "WIFI - TEST",
- "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
- "windows365SecurityBaseline": "Windows 365 Security Baseline",
- "windows8CompliancePolicy": "Windows 8 compliance policy",
- "windowsHealthMonitoring": "Windows health monitoring",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
- "windowsUpdateforBusiness": "Windows Update for Business",
- "wiredNetwork": "Wired network",
- "workProfile": "Personally-owned work profile"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Make update available gradually",
- "immediateStart": "Make update available as soon as possible",
- "startDateOnly": "Make update available on a specific date"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Managed devices",
- "devicesWithoutEnrollment": "Managed apps"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filter",
- "assignmentFilterTypeColumnHeader": "Filter mode",
- "assignmentToast": "End user notifications",
- "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
- "autoUpdate": "Auto-update",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
- "groupTableHeader": "Group",
- "installContextLabel": "Install Context",
- "isRemovable": "Install as removable",
- "licenseTypeLabel": "License type",
- "modeTableHeader": "Group mode",
- "policySet": "Policy Set",
- "preventAutoAppUpdate": "Prevent automatic app updates",
- "preventManagedAppBackup": "Prevent iCloud app backup",
- "restartGracePeriodHeader": "Restart grace period",
- "startTimeColumnLabel": "Availability",
- "tracks": "Tracks",
- "uninstallOnRemoval": "Uninstall on device removal",
- "updateMode": "Update Priority",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD web app",
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office Suite",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeAddIn": "Office add-in",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "sharePointApp": "SharePoint app",
- "teamsApp": "Teams app",
- "webApp": "Web link",
- "win32CatalogApp": "Windows catalog app (Win32)",
- "winGetPublicApp": "Windows Package Manager Community Repository",
- "winGetStoreApp": "Microsoft Store app (new)",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "AssignmentToast": {
- "hideAll": "Hide all toast notifications",
- "showAll": "Show all toast notifications",
- "showReboot": "Show toast notifications for computer restarts"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Yes",
- "notConfigured": "No"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "App install may force a device restart",
- "basedOnReturnCode": "Determine behavior based on return codes",
- "force": "Intune will force a mandatory device restart",
- "suppress": "No specific action"
- },
- "FilterType": {
- "exclude": "Exclude",
- "include": "Include",
- "none": "None"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "notApplicable": "Not applicable",
- "required": "Required",
- "uninstall": "Uninstall"
- },
- "SettingType": {
- "assignmentType": "Assignment type",
- "deviceLicensing": "License type",
- "installContext": "Uninstall on device removal",
- "toastSettings": "End user notifications",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Default",
- "postponed": "Postponed",
- "priority": "High Priority"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Configure devices for initial provisioning.",
- "title": "Device preparation"
- },
- "EnrollmentSettings": {
- "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
- "title": "Enrollment settings"
- },
- "OSConfiguration": {
- "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
- "menuTitle": "Windows operating system recovery configuration"
- },
- "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
- "coManagementAuthorityTitle": "Co-management Settings ",
- "deploymentProfiles": "Windows Autopilot deployment profiles",
- "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
- "descriptionLabel": "Windows enrollment methods",
- "enrollmentStatusPage": "Enrollment Status Page"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Automatically approve all recommended driver updates",
- "manual": "Manually approve and deploy driver updates"
- },
- "BulkActions": {
- "button": "Bulk actions"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Approval method:"
- },
- "DeploymentDeferralInDays": {
- "label": "Make updates available after",
- "units": "(days)",
- "value": "{0} days"
- },
- "DriverAction": {
- "header": "Select an action below.",
- "label": "Driver action",
- "placeholder": "Select an action"
- },
- "IncludedDrivers": {
- "label": "Included drivers"
- },
- "SelectDrivers": {
- "header": "Select drivers to include in your bulk action"
- },
- "SelectDriversToInclude": {
- "button": "Select drivers to include"
- },
- "SelectLessDrivers": {
- "validation": "At most one hundred drivers can be selected"
- },
- "SelectMoreDrivers": {
- "validation": "At least one driver should be selected"
- },
- "SelectedDrivers": {
- "label": "Selected drivers"
- },
- "availabilityDate": "Make available in Windows Update",
- "bladeTitle": "Driver updates Windows 10 and later (preview)",
- "lastSync": "Last sync:",
- "lastSyncDefaultText": "Pending initial inventory collection",
- "loadError": "Loading failed!"
- },
- "DriverStatus": {
- "approved": "Approved",
- "declined": "Declined",
- "export": "Exporting recommended drivers",
- "needsReview": "Needs review",
- "paused": "Paused"
- },
- "DriversToReview": {
- "text": "{0} to review"
- },
- "Subtitle": {
- "automatic": "Automatic approval driver update policy",
- "manual": "Manual approval driver update policy"
- },
- "SyncNotification": {
- "failure": "Unable to sync {0}",
- "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
- "pending": "{0} sync in progress",
- "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
- "success": "{0} sync complete",
- "successDescription": "Sync with WUfB service completed at {0}"
- },
- "SyncSpinner": {
- "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
- },
- "TabName": {
- "basics": "Basics",
- "driverUpdateSettings": "Settings",
- "otherDrivers": "Other drivers",
- "properties": "Properties",
- "recommendedDrivers": "Recommended drivers"
- },
- "driverAddFilter": "Add filter",
- "driverApplicableDevices": "Applicable devices",
- "driverApprovalStatus": "Status",
- "driverBulkActions": "Bulk actions",
- "driverClass": "Driver class",
- "driverCount": "Showing {0} to {1} of {2} records",
- "driverFilterNoneSelected": "None selected",
- "driverManufacturer": "Manufacturer",
- "driverName": "Driver name",
- "driverNameLower": "windows driver update deployment",
- "driverNameUpper": "Windows driver update deployment",
- "driverRefresh": "Refresh",
- "driverReleaseDate": "Release date",
- "driverSearch": "Search",
- "driverSearchKeyword": "Enter search keyword",
- "driverVersion": "Version",
- "firstDeploymentDate": "First Deployment",
- "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
- "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
- "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
- "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
- "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
- "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
- "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
- "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
- "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
- "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
- "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
- "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
- "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
- "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
- "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
- "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
- "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
- "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
- "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
- "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
- "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
- },
- "Inputs": {
- "accountDomain": "Account domain",
- "accountDomainHint": "e.g. contosodomain",
- "accountDomainInfoBalloon": "Specify the user’s account domain.",
- "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
- "allowContactSetting": "Allow user to change contact setting",
- "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
- "allowUserChange": "Allow user to change setting",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
- "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "App install context",
- "appUrlLabel": "Appstore URL",
- "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Applicable device type",
- "assignmentActionLabel": "Mode",
- "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
- "authenticationMetod": "Authentication method",
- "authenticationType": "Authentication type",
- "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
- "availableLicenseCount": "Available licenses",
- "basicAuth": "Basic authentication",
- "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
- "bookNameLabel": "Book name",
- "bundleDescriptionHint": "Enter a description that describes the apps included.",
- "calendar": "Calendar",
- "categoryLabel": "Category",
- "categoryNameLabel": "Default name",
- "certProfileType": "Certificate profile type",
- "certificate": "Certificate",
- "certificates": "Certificates",
- "commandLineLabel": "Command-line arguments",
- "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
- "configurationSettingsFormatLabel": "Configuration settings format",
- "configurationSettingsLabel": "Settings format",
- "contactSync": "Save Contacts",
- "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
- "contacts": "Contacts",
- "createdDateTime": "Created",
- "defaultCategoryHint": "Default categories cannot be changed",
- "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
- "descriptionGenericLabel": "Description",
- "descriptionHint": "Enter a description...",
- "descriptionLabel": "Description",
- "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
- "developerLabel": "Developer",
- "developerSizeHint": "The maximum length of the developer name is 256 characters.",
- "disable": "Disable",
- "disabled": "Disabled",
- "displayNameLabel": "Name",
- "displayVersionHint": "Enter the app version",
- "displayVersionLabel": "App Version",
- "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
- "eBookCategoryNameLabel": "Default name",
- "emailAccount": "Email account name",
- "emailAccountHint": "e.g. Corporate Email",
- "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
- "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
- "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
- "emailServer": "Email Server",
- "emailServerHint": "e.g. mail.contoso.com",
- "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
- "enable": "Enable",
- "enableSMime": "Enable S/MIME",
- "enabled": "Enabled",
- "encryptAllEmails": "Encrypt all emails",
- "encryptionCertificates": "Encryption certificates",
- "endUserNotifications": "End-user notifications",
- "enrollmentTypeLabel": "Device enrollment type",
- "externalRecipients": "External recipients MailTip",
- "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
- "focusedInbox": "Focused Inbox",
- "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
- "fullScreenEnabledLabel": "Full screen",
- "gmailNineAmountOfEmail": "Amount of email to synchronize",
- "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
- "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
- "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
- "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
- "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
- "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
- "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
- "ignoreManifestScope": "Ignore manifest scope",
- "ignoreVersionDetection": "Ignore app version",
- "informationUrlLabel": "Information URL",
- "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
- "installAsManaged": "Install as managed",
- "installationSourceLabel": "App type",
- "installerTypeInfoBalloon": "The installer type of the application package.",
- "installerTypeLabel": "Installer Type",
- "isFeatured": "Show this as a featured app in the Company Portal",
- "isMAMEnabledToggleLabel": "Yes",
- "lastModifiedDateTime": "Last updated Time",
- "ldapUrl": "LDAP URL",
- "licensingType": "Supports device context assignment",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimum operating system",
- "modernAuth": "Modern authentication",
- "nameHint": "Enter a name",
- "nameLabel": "Name",
- "nameSizeHint": "The maximum length of the name is 512 characters.",
- "notConfigured": "Not configured",
- "notesLabel": "Notes",
- "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
- "notificationType": "Notification type",
- "oneDay": "One Day",
- "oneMonth": "One Month",
- "oneWeek": "One Week",
- "outlookSMimeSettings": "Outlook S/MIME settings",
- "ownerLabel": "Owner",
- "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
- "packageIdLabel": "Package Identifier",
- "packageNameLabel": "Package name",
- "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
- "platformLabel": "Platform",
- "policyDescriptionLabel": "Description",
- "policyNameLabel": "Name",
- "preComposedIconEnabled": "Precomposed",
- "primarySMTPAddress": "Primary SMTP Address",
- "privacyUrlLabel": "Privacy URL",
- "publisherHint": "Enter a publisher name",
- "publisherLabel": "Publisher",
- "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
- "require": "Require",
- "requireBiometrics": "Require Biometrics to access app",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "At least one scope tag is required",
- "searchAppLabel": "Select app",
- "searchAppLinkText": "Search the App Store",
- "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
- "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
- "selectAAD": "Select a Microsoft Entra attribute",
- "selectAppFileLabel": "Select file",
- "selectAppFileLinkText": "Select app package file",
- "selectAppFileToUpdateLabel": "Select file to update",
- "selectAuthMethod": "Select an authentication method",
- "selectAuthType": "Select an authentication type",
- "selectCatalogAppLabel": "Select app",
- "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
- "selectCertificate": "Select a certificate",
- "signAllEmails": "Sign all emails",
- "signingCertificates": "Signing certificates",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Suite Description",
- "suiteNameLabel": "Suite Name",
- "targetApplicationBundleIdentifier": "Target application bundle identifier",
- "targetedPlatformsLabel": "Targeted platform",
- "tasks": "Tasks",
- "threeDays": "Three Days",
- "totalLicenseCount": "Total licenses",
- "twoWeeks": "Two Weeks",
- "unifiedAssignmentsLabel": "Assign to:",
- "unlimited": "Unlimited",
- "urlHint": "Enter a valid url",
- "useManagedBrowserHint": "Android and iOS only. Learn more",
- "useManagedBrowserLabel": "Require a managed browser to open this link",
- "userPrinicipalName": "User Principal Name",
- "username": "Username",
- "usernameAttribute": "Username attribute from Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
- "usernamePassword": "Username and password",
- "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
- "webAppUrlLabel": "App URL",
- "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
- "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "XML Data Entered",
- "xmlFormatInvalid": "XML policy format is invalid.",
- "xmlTooLarge": "Input size must be less than 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Failed to delete {0}",
- "failureCa": "Failed to delete {0} because it is referenced by CA policies",
- "modifying": "Deleting {0}",
- "success": "Successfully deleted {0}"
- },
- "Notify": {
- "failure": "Failed to update {0}",
- "modifying": "Modifying {0}",
- "success": "Successfully updated {0}"
- },
- "menuLabel": "Authentication context"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
- "certificate": "Certificate authentication",
- "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
- "multifactor": "Multifactor authentication",
- "require": "Require federated authentication method (Preview)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
- },
- "Option": {
- "always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
- "label": "Persistent browser session",
- "never": "Never persistent"
- },
- "Warning": {
- "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Hours or days",
- "value": "Frequency"
- },
- "Option": {
- "Day": {
- "plural": "{0} days",
- "singular": "1 day"
- },
- "Hour": {
- "plural": "{0} hours",
- "singular": "1 hour"
- },
- "daysOption": "Days",
- "everytime": "Every time",
- "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
- "hoursOption": "Hours",
- "label": "Sign-in frequency",
- "placeholder": "Select units"
- }
- },
- "mainOption": "Modify session lifetime",
- "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
- },
- "SingleSelectorActive": {
- "failed": "Unable to load this data.",
- "reattempt": "Loading data. Reattempt {0} of {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Choose directory roles"
- },
- "Excluded": {
- "gridAria": "List of excluded users"
- },
- "Included": {
- "gridAria": "List of included users"
- },
- "Validation": {
- "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
- "customRoleSelected": "At least one custom role is selected",
- "failed": "\"{0}\" must be configured",
- "roles": "Select at least one role",
- "usersGroups": "Select at least one user or group"
- },
- "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
- },
- "advancedTabText": "Advanced",
- "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
- "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
- "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
- "allDayCheckboxLabel": "All day",
- "allDevicePlatforms": "Any device",
- "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
- "allGuestUserLabel": "All guest and external users",
- "allRiskLevelsOption": "All risk levels",
- "allTrustedLocationLabel": "All trusted locations",
- "allUserGroupSetSelectorLabel": "All users and groups selected",
- "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
- "allUsersString": "All users",
- "and": "{0} AND {1} ",
- "andWithGrouping": "({0}) AND {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Any cloud app",
- "appContextOptionInfoContent": "Requested authentication tag",
- "appContextOptionLabel": "Requested authentication tag (Preview)",
- "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
- "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
- "appNotSetSeletorLabel": "0 cloud apps selected",
- "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
- "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
- "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
- "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
- "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
- "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
- "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
- "applyConditonLabel": "Configure",
- "ariaLabelPolicyDisabled": "Policy is disabled",
- "ariaLabelPolicyEnabled": "Policy is enabled",
- "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
- "blockAccess": "Block access",
- "builtInDirectoryRoleLabel": "Built-in directory roles",
- "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "casInfoBubble": "This control works for various cloud apps.",
- "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "cert64DownloadCol": "Download base64 certificate",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Download certificate",
- "certDurationCol": "Expiry",
- "certDurationStartCol": "Valid from",
- "certName": "VpnCert",
- "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Choose Applications",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Chosen Applications",
- "chooseApplicationsEmpty": "No Applications",
- "chooseApplicationsNone": "None",
- "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseApplicationsPlural": "{0} and {1} more",
- "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
- "chooseApplicationsRemove": "Remove",
- "chooseApplicationsReturnedPlural": "{0} applications found",
- "chooseApplicationsReturnedSingular": "1 application found",
- "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
- "chooseApplicationsSearchHint": "Search Applications...",
- "chooseApplicationsSearchLabel": "Applications",
- "chooseApplicationsSearching": "Searching...",
- "chooseApplicationsSelect": "Select",
- "chooseApplicationsSelected": "Selected",
- "chooseApplicationsSingular": "{0} and 1 more",
- "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
- "chooseLocationCorpnetItem": "Corporate network",
- "chooseLocationSelectedLocationsLabel": "Selected locations",
- "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Choose Locations",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Chosen Locations",
- "chooseLocationsEmpty": "No Locations",
- "chooseLocationsExcludedSelectorTitle": "Select",
- "chooseLocationsIncludedSelectorTitle": "Select",
- "chooseLocationsNone": "None",
- "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseLocationsPlural": "{0} and {1} more",
- "chooseLocationsRemove": "Remove",
- "chooseLocationsReturnedPlural": "{0} locations found",
- "chooseLocationsReturnedSingular": "1 location found",
- "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
- "chooseLocationsSearchHint": "Search Locations...",
- "chooseLocationsSearchLabel": "Locations",
- "chooseLocationsSearching": "Searching...",
- "chooseLocationsSelect": "Select",
- "chooseLocationsSelected": "Selected",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
- "chooseLocationsSingular": "{0} and 1 more",
- "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
- "claimProviderAddCommandText": "New custom control",
- "claimProviderAddNewBladeTitle": "New custom control",
- "claimProviderDeleteCommand": "Delete",
- "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "claimProviderDeleteTitle": "Are you sure?",
- "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
- "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
- "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
- "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
- "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
- "claimProviderNotificationCreateTitle": "Creating '{0}'",
- "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
- "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
- "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
- "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
- "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
- "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
- "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
- "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
- "claimProviderNotificationUpdateTitle": "Updating '{0}'",
- "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
- "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
- "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
- "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
- "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
- "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
- "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
- "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
- "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
- "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
- "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
- "claimProvidersNone": "No custom controls",
- "claimProvidersSearchPlaceholder": "Search controls.",
- "classicPoilcyFilterTitle": "Show",
- "classicPolicyAllPlatforms": "All Platforms",
- "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
- "classicPolicyCloudAppTitle": "Cloud application",
- "classicPolicyControlAllow": "Allow",
- "classicPolicyControlBlock": "Block",
- "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
- "classicPolicyControlRequireCompliantDevice": "Require compliant device",
- "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
- "classicPolicyControlRequireMfa": "Require multifactor authentication",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
- "classicPolicyDeleteCommand": "Delete",
- "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
- "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
- "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
- "classicPolicyDetailBladeTitle": "Details",
- "classicPolicyDisableCommand": "Disable",
- "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
- "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
- "classicPolicyDisableFailTitle": "Failed to disable classic policy",
- "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
- "classicPolicyDisableInProgressTitle": "Disabling classic policy",
- "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
- "classicPolicyDisableSuccessTitle": "Classic policy disabled",
- "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
- "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
- "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
- "classicPolicyFilterAll": "All policies",
- "classicPolicyFilterDisabled": "Disabled policies",
- "classicPolicyFilterEnabled": "Enabled policies",
- "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
- "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
- "classicPolicyIncludedPlatformsTitle": "Included device platforms",
- "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
- "classicPolicyMigrateCommand": "Migrate",
- "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
- "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
- "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
- "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
- "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
- "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
- "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
- "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
- "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
- "classicPolicySaveFailDescription": "Failed to save '{0}'",
- "classicPolicySaveFailTitle": "Failed to save classic policy",
- "classicPolicySaveInProgressDescription": "Saving '{0}'",
- "classicPolicySaveInProgressTitle": "Saving classic policy",
- "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
- "classicPolicySaveSuccessTitle": "Classic policy saved",
- "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
- "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
- "clientAppBladeTitle": "Client apps",
- "clientAppDescription": "Select the client apps this policy will apply to",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
- "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
- "clientAppLegacyHeader": "Legacy authentication clients",
- "clientAppMobileDesktop": "Mobile apps and desktop clients",
- "clientAppModernHeader": "Modern authentication clients",
- "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
- "clientAppSelectSpecificClientApps": "Select client apps",
- "clientAppWebBrowser": "Browser",
- "clientAppsSelectedLabel": "{0} included",
- "clientTypeBrowser": "Browser",
- "clientTypeEas": "Exchange ActiveSync clients",
- "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
- "clientTypeModernAuth": "Modern authentication clients",
- "clientTypeOtherClients": "Other clients",
- "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
- "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
- "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
- "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
- "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
- "cloudappsSelectorPluralExcluded": "{0} apps excluded",
- "cloudappsSelectorPluralIncluded": "{0} apps included",
- "cloudappsSelectorSingularExcluded": "1 app excluded",
- "cloudappsSelectorSingularIncluded": "1 app included",
- "cloudappsSelectorUserPlural": "{0} apps",
- "cloudappsSelectorUserSingular": "1 app",
- "conditionLabelMulti": "{0} conditions selected",
- "conditionLabelOne": "1 condition selected",
- "conditionalAccessBladeTitle": "Conditional Access",
- "conditionsNotSelectedLabel": "Not configured",
- "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
- "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
- "configureCasText": "Configure Cloud App Security",
- "configureCustomControlsText": "Configure custom policy",
- "controlLabelMulti": "{0} controls selected",
- "controlLabelOne": "1 control selected",
- "controlValidatorText": "Please select at least one control",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
- "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
- "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
- "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
- "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
- "controlsMamInfoBubble": "Device must use these approved client applications.",
- "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
- "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
- "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
- "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
- "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
- "createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
- "customRoleLabel": "Custom roles (not supported)",
- "dateRangeTypeLabel": "Date range",
- "daysOfWeekPlaceholderText": "Filter days of the week",
- "daysOfWeekTypeLabel": "Days of the week",
- "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
- "descriptionContentForControlsAndOr": "For multiple controls",
- "devicePlatform": "Device platform",
- "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} included",
- "devicePlatformIncludeExclude": "{0} and {1} excluded",
- "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
- "devicePlatformsNone": "None",
- "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
- "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
- "deviceStateAll": "All device state",
- "deviceStateCompliant": "Device marked as compliant",
- "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
- "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
- "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
- "deviceStateConditionSelectorLabel": "Device state (deprecated)",
- "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
- "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
- "deviceStateDomainJoinedInfoLinkText": "Learn more.",
- "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
- "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
- "directoryRolesLabel": "Directory roles",
- "discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
- "duplicatePolicyName": "{0} COPY",
- "endDatePickerLabel": "Ends",
- "endTimePickerLabel": "End time",
- "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
- "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
- "enterUserText": "No user is selected. Select a user.",
- "evaluationResult": "Evaluation result",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
- "excludeAllTrustedLocationSelectorText": "all trusted locations",
- "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
- "friday": "Friday",
- "grantControls": "Grant controls",
- "gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
- "gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
- "gridPolicyName": "Policy Name",
- "gridPolicyState": "State",
- "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
- "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
- "groupSelectionBladeSelect": "Select groups",
- "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
- "groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
- "highRisk": "High",
- "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
- "includeAppsTextFormat": "Include: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
- "includeUnknownAreasCheckboxLabel": "Include unknown areas",
- "infoCommandLabel": "Info",
- "invalidCertDuration": "Invalid cert duration",
- "invalidIpAddress": "Value must be a valid IP address",
- "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
- "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Load all",
- "loading": "Loading...",
- "locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
- "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
- "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
- "locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
- "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
- "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
- "locationsSelectedPrivateLinksLabel": "Selected Private Links",
- "lowRisk": "Low",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
- "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
- "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
- "markAsTrustedCheckboxLabel": "Mark as trusted location",
- "mediumRisk": "Medium",
- "memberSelectionCommandRemove": "Remove",
- "menuItemClaimProviderControls": "Custom controls (Preview)",
- "menuItemClassicPolicies": "Classic policies",
- "menuItemInsightsAndReporting": "Insights and reporting",
- "menuItemManage": "Manage",
- "menuItemNamedLocationsPreview": "Named locations (Preview)",
- "menuItemNamedNetworks": "Named locations",
- "menuItemPolicies": "Policies",
- "menuItemTermsOfUse": "Terms of use",
- "modifiedTimeLabel": "Modified time",
- "monday": "Monday",
- "nameLabel": "Name",
- "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
- "namedLocationTypeCountry": "Countries/Regions",
- "namedLocationTypeLabel": "Define the location using:",
- "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
- "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "You need to select at least one country/region",
- "namedNetworkDeleteCommand": "Delete",
- "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
- "namedNetworkInvalidRange": "Value must be a valid IP range.",
- "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
- "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
- "namedNetworkIpRangesTab": "IP ranges",
- "namedNetworkListAdd": "New location",
- "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
- "namedNetworkNameDescription": "Example: 'Redmond office'",
- "namedNetworkNameInvalid": "The supplied name is invalid.",
- "namedNetworkNameRequired": "You must supply a name for this location.",
- "namedNetworkNoIpRanges": "No IP ranges",
- "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
- "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
- "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
- "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
- "namedNetworkNotificationCreateTitle": "Creating '{0}'",
- "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
- "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
- "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
- "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
- "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
- "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
- "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
- "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
- "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
- "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
- "namedNetworkSearchPlaceholder": "Search locations.",
- "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
- "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
- "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
- "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
- "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
- "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
- "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
- "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
- "namedNetworksAdd": "New named location",
- "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} and {1} excluded",
- "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} included",
- "namedNetworksNone": "No named locations found.",
- "namedNetworksTitle": "Configure locations",
- "namednetworkExceedingSizeErrorBladeTitle": "Error details",
- "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
- "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
- "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
- "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
- "newCertName": "new cert",
- "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
- "noPolicyRowMessage": "No policies",
- "noSPSelected": "No service principal selected",
- "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
- "noUserSelected": "No user selected",
- "noneRisk": "No risk",
- "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
- "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
- "oneUserSelected": "1 user selected",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
- "or": "{0} OR {1} ",
- "pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
- "policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
- "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
- "policyAssignmentsSection": "Assignments",
- "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
- "policyCloudAppsDisplayTextAllApp": "All apps",
- "policyCloudAppsLabel": "Cloud apps",
- "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionDevicePlatform": "Device platforms",
- "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
- "policyConditionLocation": "Locations",
- "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
- "policyConditionLocationPreview": "Locations (Preview)",
- "policyConditionSigninRisk": "Sign-in risk",
- "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
- "policyConditionUserRisk": "User risk",
- "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
- "policyConditioniClientApp": "Client apps",
- "policyControlAllowAccessDisplayedName": "Grant access",
- "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
- "policyControlBladeTitle": "Grant",
- "policyControlBlockAccessDisplayedName": "Block access",
- "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
- "policyControlContentDescription": "Control access enforcement to block or grant access.",
- "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
- "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
- "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
- "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
- "policyControlRequireMamDisplayedName": "Require approved client app",
- "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
- "policyControlSelectAuthStrength": "Require authentication strength",
- "policyControlsNoControlsSelected": "0 controls selected",
- "policyControlsSection": "Access controls",
- "policyCreatBladeTitle": "New",
- "policyCreateButton": "Create",
- "policyCreateFailedMessage": "Error: {0}",
- "policyCreateFailedTitle": "Failed to create '{0}'",
- "policyCreateInProgressTitle": "Creating '{0}'",
- "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyCreateSuccessTitle": "Successfully created '{0}'",
- "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "policyDeleteFailTitle": "Failed to delete '{0}'",
- "policyDeleteInProgressTitle": "Deleting '{0}'",
- "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
- "policyEnforceLabel": "Enable policy",
- "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
- "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
- "policyErrorUnknown": "Something went wrong, please try again later.",
- "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
- "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
- "policyNameCannotBeEmpty": "Policy name can't be empty",
- "policyNameDevice": "Device policy",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Mobile App Management policy",
- "policyNameMfaLocation": "Multifactor authentication and location policy",
- "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
- "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
- "policyOff": "Off",
- "policyOn": "On",
- "policyReportOnly": "Report-only",
- "policyReviewSection": "Review",
- "policySaveButton": "Save",
- "policyStatusIconDescription": "Policy is Enabled",
- "policyStatusIconEnabled": "Enabled status icon",
- "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
- "policyTemplateName2": "Allow {0} access only on managed devices",
- "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
- "policyTriggerRiskSpecific": "Select specific risk level",
- "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
- "policyTriggersNoConditionsSelected": "0 conditions selected",
- "policyTriggersSelectorLabel": "Conditions",
- "policyUpdateFailedMessage": "Error: {0}",
- "policyUpdateFailedTitle": "Failed to update {0}",
- "policyUpdateInProgressTitle": "Updating {0}",
- "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyUpdateSuccessTitle": "Successfully updated {0}",
- "primaryCol": "Primary",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
- "requireAllControlsText": "Require all the selected controls",
- "requireCompliantDevice": "Require compliant device",
- "requireDomainJoined": "Require domain-joined device",
- "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
- "requireMFA": "Require multifactor authentication",
- "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
- "requireOneControlText": "Require one of the selected controls",
- "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
- "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
- "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
- "resetFilters": "Reset filters",
- "sPRequired": "Service principal required",
- "sPSelectorInfoBalloon": "User or Service Principal you want to test",
- "saturday": "Saturday",
- "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
- "securityDefaultsPolicyName": "Security defaults",
- "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
- "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
- "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
- "selectDevicePlatforms": "Select device platforms",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Select locations",
- "selectedSP": "Selected Service Principal",
- "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
- "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
- "servicePrincipalDataGridAria": "List of available service principals",
- "servicePrincipalDropDownLabel": "What does this policy apply to?",
- "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
- "servicePrincipalSelectionsAria": "Selected service principals grid",
- "servicePrincipalSelectorAria": "List of chosen service principals",
- "servicePrincipalSelectorMultiple": "{0} service principals selected",
- "servicePrincipalSelectorSingle": "1 service principal selected",
- "servicePrincipalSpecificExc": "Specific service principals excluded",
- "servicePrincipalSpecificInc": "Specific service principals included",
- "servicePrincipals": "Service principals",
- "sessionControlBladeTitle": "Session",
- "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
- "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
- "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
- "sessionControls": "Session controls",
- "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
- "sessionControlsCasLabel": "Use Conditional Access App Control",
- "sessionControlsSecureSignInLabel": "Require token binding",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} included",
- "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
- "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
- "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
- "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
- "specificUsersExcluded": "specific users excluded",
- "specificUsersIncluded": "Specific users included",
- "specificUsersIncludedAndExcluded": "Specific users excluded and included",
- "startDatePickerLabel": "Starts",
- "startFreeTrial": "Start a free trial",
- "startTimePickerLabel": "Start time",
- "sunday": "Sunday",
- "testButton": "What If",
- "thumbprintCol": "Thumbprint",
- "thursday": "Thursday",
- "timeConditionAllTimesLabel": "Any time",
- "timeConditionIntroText": "Configure the time this policy will apply to",
- "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
- "timeConditionSelectorLabel": "Time (Preview)",
- "timeConditionSpecificLabel": "Specific times",
- "timeSelectorAllTimesText": "Any time",
- "timeSelectorSpecificTimesText": "Specific times configured",
- "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
- "timeZoneDropdownLabel": "Time zone",
- "timeZoneDropdownPlaceholderText": "Select a time zone",
- "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
- "tooManyPoliciesTitle": "More than 50 policies found",
- "trustedLocationStatusIconDescription": "Location is trusted",
- "trustedLocationStatusIconEnabled": "Trusted status icon",
- "tuesday": "Tuesday",
- "uploadInBadState": "Unable to upload the specified file.",
- "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
- "upsellAppsTitle": "Secure applications",
- "upsellBannerText": "Get a free Premium trial to use this feature",
- "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
- "upsellDataTitle": "Secure data",
- "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
- "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
- "upsellRiskTitle": "Protect against risk",
- "upsellTitle": "Conditional Access",
- "upsellWhyTitle": "Why use Conditional Access?",
- "userAppNoneOption": "None",
- "userNamePlaceholderText": "Enter User Name",
- "userNotSetSeletorLabel": "0 users and groups selected",
- "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
- "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
- "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
- "userOrSPSelectionBladeTitle": "Users or workload identities",
- "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
- "userRequired": "User Required",
- "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
- "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
- "userSPRequired": "User or Service principal required",
- "userSPSelectorTitle": "User or Workload identity",
- "userSelectionBladeAllUsersAndGroups": "All users and groups",
- "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
- "userSelectionBladeExcludeTabTitle": "Exclude",
- "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
- "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
- "userSelectionBladeIncludeTabTitle": "Include",
- "userSelectionBladeIncludedSelectorTitle": "Select",
- "userSelectionBladeSelectUsers": "Select users",
- "userSelectionBladeSelectedUsers": "Select users and groups",
- "userSelectionBladeTitle": "Users and groups",
- "userSelectorBladeTitle": "Users",
- "userSelectorExcluded": "{0} excluded",
- "userSelectorGroupPlural": "{0} groups",
- "userSelectorGroupSingular": "1 group",
- "userSelectorIncluded": "{0} included",
- "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
- "userSelectorSelected": "{0} selected",
- "userSelectorTitle": "User",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} users",
- "userSelectorUserSingular": "1 user",
- "userSelectorWithExclusion": "{0} and {1}",
- "usersGroupsLabel": "Users and groups",
- "viewApprovedAppsText": "See list of approved client apps",
- "viewCompliantAppsText": "See list of policy protected client apps",
- "viewPolicyInformation": "View policy information",
- "vpnBladeTitle": "VPN connectivity",
- "vpnCertCreateFailedMessage": "Error: {0}",
- "vpnCertCreateFailedTitle": "Failed to create {0}",
- "vpnCertCreateInProgressTitle": "Creating {0}",
- "vpnCertCreateSuccessMessage": "Successfully created {0}.",
- "vpnCertCreateSuccessTitle": "Successfully created {0}",
- "vpnCertNoRowsMessage": "No VPN certificates found",
- "vpnCertUpdateFailedMessage": "Error: {0}",
- "vpnCertUpdateFailedTitle": "Failed to update {0}",
- "vpnCertUpdateInProgressTitle": "Updating {0}",
- "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
- "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
- "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
- "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
- "vpnMenuText": "VPN connectivity",
- "vpncertDropdownDefaultOption": "Duration",
- "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
- "vpncertDropdownLabel": "Select duration",
- "vpncertDropdownOneyearOption": "1 year",
- "vpncertDropdownThreeyearOption": "3 years",
- "vpncertDropdownTwoyearOption": "2 years",
- "wednesday": "Wednesday",
- "whatIfCountry": "Country/Region",
- "whatIfCountryInfo": "The country/region the user is signing in from.",
- "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
- "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
- "whatIfIpAddress": "IP address",
- "whatIfIpAddressInfo": "IP address the user is signing in from.",
- "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
- "whatIfSelectCountry": "Select country/region...",
- "whatIfSelectDevicePlatform": "Select device platform...",
- "whatIfSelectPrivateLink": "Select private link...",
- "whatIfSelectSignInRisk": "Select sign-in risk...",
- "whatIfSignInRisk": "Sign-in risk",
- "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
- "whatIfUnknownAreas": "Unknown Areas",
- "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Workload identities (preview)",
- "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
- "workloadIdentity": "Workload identity"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Not supported",
- "supportEnding": "Support ending",
- "supported": "Supported"
- }
- },
- "SecurityTemplate": {
- "aSR": "Attack surface reduction",
- "accountProtection": "Account protection",
- "allDevices": "All devices",
- "antivirus": "Antivirus",
- "antivirusReporting": "Antivirus Reporting (Preview)",
- "conditionalAccess": "Conditional access",
- "deviceCompliance": "Device compliance",
- "diskEncryption": "Disk encryption",
- "eDR": "Endpoint detection and response",
- "ePM": "Endpoint Privilege Management",
- "firewall": "Firewall",
- "helpSupport": "Help and support",
- "setup": "Setup",
- "wdapt": "Microsoft Defender for Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Failed",
- "hardReboot": "Hard reboot",
- "retry": "Retry",
- "softReboot": "Soft reboot",
- "success": "Success"
- },
- "Columns": {
- "codeType": "Code type",
- "returnCode": "Return code"
- },
- "bladeTitle": "Return codes",
- "gridAriaLabel": "Return codes",
- "header": "Specify return codes to indicate post-installation behavior:",
- "onAddAnnounceMessage": "Return code added item {0} of {1}",
- "onDeleteSuccess": "Return code {0} deleted successfully",
- "returnCodeAlreadyUsedValidation": "Return code is already used.",
- "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
- "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
- "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
- "selectorLabel": "Return codes"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabic",
- "bulgarian": "Bulgarian",
- "chineseSimplified": "Chinese (Simplified)",
- "chineseTraditional": "Chinese (Traditional)",
- "croatian": "Croatian",
- "czech": "Czech",
- "danish": "Danish",
- "dutch": "Dutch",
- "englishUK": "English (United Kingdom)",
- "englishUS": "English (United States)",
- "estonian": "Estonian",
- "finnish": "Finnish",
- "frenchCanada": "French (Canada)",
- "frenchFrance": "French (France)",
- "german": "German",
- "greek": "Greek",
- "hebrew": "Hebrew",
- "hungarian": "Hungarian",
- "italian": "Italian",
- "japanese": "Japanese",
- "korean": "Korean",
- "latvian": "Latvian",
- "lithuanian": "Lithuanian",
- "norwegian": "Norwegian, Bokmål",
- "polish": "Polish",
- "portugueseBrazil": "Portuguese (Brazil)",
- "portuguesePortugal": "Portuguese (Portugal)",
- "romanian": "Romanian",
- "russian": "Russian",
- "serbian": "Serbian",
- "slovak": "Slovak",
- "slovenian": "Slovenian",
- "spanishMexico": "Spanish (Mexico)",
- "spanishSpain": "Spanish (Spain)",
- "swedish": "Swedish",
- "thai": "Thailand",
- "turkish": "Turkish",
- "ukrainian": "Ukrainian"
- },
- "Summary": {
- "placeholder": "Select a notification message from the left to preview contents."
- },
- "companyContact": "Show contact information",
- "companyLogo": "Show company logo",
- "companyName": "Show company name",
- "createEditDescription": "Create or edit notification message templates.",
- "createMessage": "Create message",
- "deviceDetails": "Show device details",
- "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
- "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
- "editMessage": "Edit message",
- "email": "email",
- "emailFooterTitle": "Email Footer",
- "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
- "emailHeaderTitle": "Email Header",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Configure Customization settings",
- "formSubTitle": "Create or modify notification emails",
- "headerFooterSettingsTab": "Header and footer settings",
- "imgPreview": "Image Preview",
- "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
- "iwLink": "Show company portal website link",
- "listEmpty": "No message templates.",
- "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "listSubTitle": "List of notification message templates",
- "listTitle": "Notification message templates",
- "localizedNotificationMessageTemplates": "Localized notification message templates",
- "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
- "messageCapitalized": "Notification message template",
- "messageLowercase": "notification message template",
- "missingDefaultError": "Select a default template",
- "notificationMessageTemplates": "Notification message templates",
- "rowValidationError": "At least one message template is required",
- "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "tenantValueText": "Tenant Value",
- "testEmailLabel": "Send preview email",
- "localeLabel": "Locale",
- "isDefaultLocale": "Is Default"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Number of days to wait before restart is enforced"
- },
"Description": {
"label": "Description"
},
+ "FeatureDeploymentSettings": {
+ "header": "Feature deployment settings"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "This feature cannot downgrade a device.",
+ "label": "Feature update to deploy"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Final group availability"
+ },
+ "GradualRolloutInterval": {
+ "label": "Days between groups"
+ },
+ "GradualRolloutStartDate": {
+ "label": "First group availability"
+ },
"Name": {
"label": "Name"
},
- "QualityUpdateRelease": {
- "label": "Expedite installation of quality updates if device OS version less than:"
- },
- "bladeTitle": "Quality updates Windows 10 and later (preview)",
- "loadError": "Loading failed!"
+ "OptionalUpdate": {
+ "label": "Required or optional update"
+ },
+ "RolloutOptions": {
+ "label": "Rollout options"
+ },
+ "RolloutSettings": {
+ "header": "When would you like to make the update available in Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Configure scope tags for this policy."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "First available date"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Disabled",
+ "enabled": "Enabled",
+ "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
+ "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
+ "notApplicable": "Not Applicable",
+ "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
+ },
+ "bladeTitle": "Feature update deployments",
+ "deploymentSettingsTitle": "Deployment settings",
+ "loadError": "Loading failed!",
+ "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\" has been saved.",
+ "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
+ },
"TabName": {
- "qualityUpdateSettings": "Settings"
+ "deploymentSettings": "Deployment settings",
+ "groupAssignmentSettings": "Assignments",
+ "scopeSettings": "Scope tags"
},
- "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
- "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
- "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
- "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
+ "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
+ "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
+ "profileNameWarning": "Name should be less than 64 characters",
+ "specificLicensingRequired": "Some selected capabilities require specific licensing."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64-bit",
- "thirtyTwoBit": "32-bit"
- },
- "TACSettings": {
- "edgeSettings": "Edge configuration settings",
- "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
- "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
- "generalAppConfig": "General app configuration",
- "generalSettings": "General configuration settings",
- "outlookSMIMEConfig": "Outlook S/MIME settings",
- "outlookSettings": "Outlook configuration settings",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Add network boundary",
- "addNetworkBoundaryButton": "Add network boundary...",
- "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
- "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
- "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
- "boundaryType": "Boundary type",
- "cloudResources": "Cloud resources",
- "corporateIdentity": "Corporate identity",
- "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
- "editNetworkBoundary": "Edit network boundary",
- "enrollmentState": "Enrollment state",
- "iPv4Ranges": "IPv4 ranges",
- "iPv6Ranges": "IPv6 ranges",
- "internalProxyServers": "Internal proxy servers",
- "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
- "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
- "mdmDiscoveryUrl": "MDM discovery URL",
- "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
- "minimumPinLength": "Set the minimum number of characters required for the PIN",
- "name": "Name",
- "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
- "networkBoundary": "Network boundary",
- "networkDomainNames": "Network domains",
- "neutralResources": "Neutral resources",
- "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
- "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
- "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
- "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
- "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
- "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
- "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
- "protectedDomainNames": "Protected domains",
- "proxyServers": "Proxy servers",
- "requireAppPin": "Disable app PIN when device PIN is managed",
- "requiredSettings": "Required settings",
- "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
- "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
- "revokeOnUnenroll": "Revoke encryption keys on unenroll",
- "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
- "showWipIcon": "Show the enterprise data protection icon",
- "type": "Type",
- "useRmsForWip": "Use Azure RMS for WIP",
- "value": "Value",
- "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
- "wipProtectionMode": "Windows Information Protection mode",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
+ "Platform": {
+ "all": "All",
+ "android": "Android device administrator",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android enterprise",
+ "common": "Common",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS and Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "windows": "Windows",
+ "windows10": "Windows 10 and later",
+ "windows10CM": "Windows 10 and later (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 and later",
+ "windows8And10": "Windows 8 and 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 and later",
+ "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows PC"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filter",
+ "noFilters": "None"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Author",
- "template": "Template name"
- },
- "Row": {
- "ariaLabel": "row {0} of {1} column {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
- },
- "SettingsCatalog": {
- "subtitle": "Start from scratch and select settings you want from the library of available settings",
- "title": "Settings catalog"
- },
- "Templates": {
- "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
- "title": "Templates"
- },
- "noData": "No policy templates found"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop Client",
- "visioProRetail": "Visio Online Plan 2"
- },
- "Countries": {
- "ae": "United Arab Emirates",
- "ag": "Antigua and Barbuda",
- "ai": "Anguilla",
- "al": "Albania",
- "am": "Armenia",
- "ao": "Angola",
- "ar": "Argentina",
- "at": "Austria",
- "au": "Australia",
- "az": "Azerbaijan",
- "bb": "Barbados",
- "be": "Belgium",
- "bf": "Burkina Faso",
- "bg": "Bulgaria",
- "bh": "Bahrain",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolivia",
- "br": "Brazil",
- "bs": "Bahamas",
- "bt": "Bhutan",
- "bw": "Botswana",
- "by": "Belarus",
- "bz": "Belize",
- "ca": "Canada",
- "cg": "Republic Of Congo",
- "ch": "Switzerland",
- "cl": "Chile",
- "cn": "China",
- "co": "Colombia",
- "cr": "Costa Rica",
- "cv": "Cape Verde",
- "cy": "Cyprus",
- "cz": "Czech Republic",
- "de": "Germany",
- "dk": "Denmark",
- "dm": "Dominica",
- "do": "Dominican Republic",
- "dz": "Algeria",
- "ec": "Ecuador",
- "ee": "Estonia",
- "eg": "Egypt",
- "es": "Spain",
- "fi": "Finland",
- "fj": "Fiji",
- "fm": "Federated States Of Micronesia",
- "fr": "France",
- "gb": "United Kingdom",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Greece",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hong Kong",
- "hn": "Honduras",
- "hr": "Croatia",
- "hu": "Hungary",
- "id": "Indonesia",
- "ie": "Ireland",
- "il": "Israel",
- "in": "India",
- "is": "Iceland",
- "it": "Italy",
- "jm": "Jamaica",
- "jo": "Jordan",
- "jp": "Japan",
- "ke": "Kenya",
- "kg": "Kyrgyzstan",
- "kh": "Cambodia",
- "kn": "St. Kitts and Nevis",
- "kr": "Republic Of Korea",
- "kw": "Kuwait",
- "ky": "Cayman Islands",
- "kz": "Kazakstan",
- "la": "Lao People’s Democratic Republic",
- "lb": "Lebanon",
- "lc": "St. Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Lithuania",
- "lu": "Luxembourg",
- "lv": "Latvia",
- "md": "Republic Of Moldova",
- "mg": "Madagascar",
- "mk": "North Macedonia",
- "ml": "Mali",
- "mn": "Mongolia",
- "mo": "Macau",
- "mr": "Mauritania",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Mexico",
- "my": "Malaysia",
- "mz": "Mozambique",
- "na": "Namibia",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Netherlands",
- "no": "Norway",
- "np": "Nepal",
- "nz": "New Zealand",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua New Guinea",
- "ph": "Philippines",
- "pk": "Pakistan",
- "pl": "Poland",
- "pt": "Portugal",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Romania",
- "ru": "Russia",
- "sa": "Saudi Arabia",
- "sb": "Solomon Islands",
- "sc": "Seychelles",
- "se": "Sweden",
- "sg": "Singapore",
- "si": "Slovenia",
- "sk": "Slovakia",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Suriname",
- "st": "Sao Tome and Principe",
- "sv": "El Salvador",
- "sz": "Swaziland",
- "tc": "Turks and Caicos",
- "td": "Chad",
- "th": "Thailand",
- "tj": "Tajikistan",
- "tm": "Turkmenistan",
- "tn": "Tunisia",
- "tr": "Turkey",
- "tt": "Trinidad and Tobago",
- "tw": "Taiwan",
- "tz": "Tanzania",
- "ua": "Ukraine",
- "ug": "Uganda",
- "us": "United States",
- "uy": "Uruguay",
- "uz": "Uzbekistan",
- "vc": "St. Vincent and The Grenadines",
- "ve": "Venezuela",
- "vg": "British Virgin Islands",
- "vn": "Vietnam",
- "ye": "Yemen",
- "za": "South Africa",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Current Channel",
- "deferred": "Semi-Annual Enterprise Channel",
- "firstReleaseCurrent": "Current Channel (Preview)",
- "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
- "monthlyEnterprise": "Monthly Enterprise Channel",
- "placeHolder": "Select one"
- },
- "AppProtection": {
- "allAppTypes": "Target to all app types",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Apps in Android Work Profile",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
- "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
- "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
- "appsOnUnmanagedDevices": "Apps on unmanaged devices",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Not Available",
- "windows10PlatformLabel": "Windows 10 and later",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Built-in Role",
- "customCloudPCRole": "Custom Windows 365 role",
- "customIntuneRole": "Custom Intune role",
- "customRole": "Custom Role"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "header": "Are you sure you want to delete this restriction?"
- },
- "DeviceLimit": {
- "description": "Specify the maximum number of devices a user can enroll.",
- "header": "Device limit restrictions",
- "info": "Define how many devices each user can enroll."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Must be 1.0 or greater.",
- "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
- "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
- "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
- "min": "Minimum cannot be lower than {0}",
- "minMax": "Minimum version cannot be greater than maximum version.",
- "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
- "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
- },
- "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
- "blockManufacturerPlaceHolder": "Manufacturer name",
- "blockManufacturersHeader": "Blocked manufacturers",
- "cannotRestrict": "Restriction not supported",
- "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
- "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
- "configurations": "Configure platforms",
- "deviceManufacturer": "Device manufacturer",
- "header": "Device type restrictions",
- "info": "Define which platforms, versions, and management types can enroll.",
- "manufacturer": "Manufacturer",
- "max": "Max",
- "maxVersion": "Maximum version",
- "min": "Min",
- "minVersion": "Minimum version",
- "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
- "personal": "Personally owned",
- "platform": "Platform",
- "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
- "platformSettings": "Platform settings",
- "platforms": "Select platforms",
- "platformsSelected": "{0} platforms selected",
- "type": "Type",
- "versions": "versions",
- "versionsRange": "Allow min/max range:",
- "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
- },
- "Priority": {
- "saved": "Restriction Priorities were successfully saved."
- },
- "Row": {
- "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
- },
- "Table": {
- "deployed": "Deployed",
- "name": "Name",
- "priority": "Priority"
- },
- "Type": {
- "limit": "Device limit restriction",
- "type": "Device type restriction"
- },
- "allUsers": "All Users",
- "androidRestrictions": "Android restrictions",
- "create": "Create restriction",
- "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
- "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
- "deleteTitle": "Are you sure you want to delete {0} restriction?",
- "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
- "edit": "Edit restriction",
- "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
- "iosRestrictions": "iOS restrictions",
- "mDM": "MDM",
- "macRestrictions": "macOS restrictions",
- "maxVersion": "Max Version",
- "minVersion": "Min Version",
- "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
- "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
- "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
- "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
- "notFound": "Restriction not found. It may have already been deleted.",
- "personallyOwned": "Personally owned devices",
- "restriction": "Restriction",
- "restrictionLowerCase": "restriction",
- "restrictionType": "Restriction type",
- "selectType": "Select restriction type",
- "selectValidation": "Please select a platform",
- "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
- "typeRequired": "Restriction type is required.",
- "winPhoneRestrictions": "Windows Phone restrictions",
- "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
- "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
- "windowsRestrictions": "Windows restrictions",
- "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
- },
- "InstallContextType": {
- "device": "Device",
- "deviceContext": "Device context",
- "user": "User",
- "userContext": "User context"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Description",
- "placeholder": "Enter a description"
- },
- "NameTextBox": {
- "label": "Name",
- "placeholder": "Enter a name"
- },
- "PublisherTextBox": {
- "label": "Publisher",
- "placeholder": "Enter a publisher"
- },
- "VersionTextBox": {
- "label": "Version"
- },
- "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
- },
- "ScopeTags": {
- "headerDescription": "Select one or more groups to assign the script package."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Detection script",
- "placeholder": "Input script text",
- "requiredValidationMessage": "Please enter the detection script"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Enforce script signature check"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Run this script using the logged-on credentials"
- },
- "RemediationScript": {
- "infoBox": "This script will run in detect-only mode because there is no remediation script."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Remediation script",
- "placeholder": "Input script text"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Run script in 64-bit PowerShell"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
- },
- "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
- "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
- },
- "title": "Create custom script",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Interval",
- "time": "Date and time"
- },
- "Interval": {
- "day": "Repeats every day",
- "days": "Repeats every {0} days",
- "hour": "Repeats every hour",
- "hours": "Repeats every {0} hours",
- "month": "Repeats every month",
- "months": "Repeats every {0} months",
- "week": "Repeats every week",
- "weeks": "Repeats every {0} weeks"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) on {1}",
- "withDate": "{0} on {1}"
- }
- }
- },
- "Edit": {
- "title": "Edit - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Allowed URLs",
- "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "ApplicationProxyRedirection": {
- "header": "Application proxy",
- "title": "Application proxy redirection",
- "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
- },
- "BlockedURLs": {
- "title": "Blocked URLs",
- "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "Bookmarks": {
- "header": "Managed bookmarks",
- "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Managed homepage",
- "title": "Homepage shortcut URL",
- "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Redirect restricted sites to personal context",
- "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
- }
- },
- "BooleanActions": {
- "allow": "Allow",
- "block": "Block",
- "configured": "Configured",
- "disable": "Disable",
- "dontRequire": "Don't Require",
- "enable": "Enable",
- "hide": "Hide",
- "limit": "Limit",
- "notConfigured": "Not configured",
- "require": "Require",
- "show": "Show",
- "yes": "Yes"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Make available to users as an optional update",
- "optionalValue": "Optional",
- "required": "Make available to users as a required update",
- "requiredValue": "Required"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 day",
- "twoDays": "2 days",
- "zeroDays": "0 days"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Overview"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load iOS software update profiles"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS update profile",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profile"
- },
- "listLoadError": "Unable to load iOS software update profiles, try again later",
- "lowercase": "iOS update policy",
- "uppercase": "iOS Update policy"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
- "latestUpdate": "Latest update",
- "noLongerSupported": "Selected version is no longer supported",
- "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
- "prefix": "Install iOS/iPadOS",
- "selectSupported": "Select update version supported by Apple",
- "updateToInstall": "Update to install"
- },
- "Schedule": {
- "always": "Update at next check-in",
- "duringTimeWindows": "Update during scheduled time",
- "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
- "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
- "label": "Schedule type",
- "outsideActiveHours": "Update outside of active hours (legacy)",
- "outsideTimeWindows": "Update outside of scheduled time",
- "timeWindow": "Time window",
- "timeZone": "Time zone",
- "title": "Update policy schedule settings:",
- "weekly": "Weekly schedule",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
- "label": "Select version to install"
- },
- "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
- "notAvailable": "N/A"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "There are no iOS update policies to display",
- "macOsUpdates": "There are no macOS software update policies to display",
- "windowsUpdates": "There are no update rings for Windows 10 and later to show."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Device name",
- "deviceUpdateStatus": "Device update status",
- "lastUpdated": "Last updated",
- "osVersion": "OS version",
- "userPrincipalName": "User name"
- },
- "maximumOSVersionFilter": "Maximum OS version",
- "minimumOSVersionFilter": "Minimum OS version",
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by device name, user name or OS version",
- "title": "Account summary for macOS devices"
- },
- "Category": {
- "configurationDataFile": "Configuration data file",
- "critical": "Critical",
- "firmware": "Firmware",
- "other": "Other"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "successfulUpdateCount": "Successful updates deployed",
- "totalUpdateCount": "Total updates deployed",
- "updateCategory": "Update category",
- "updateCategoryStatus": "Update category status"
- },
- "noData": "No data to display"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load macOS software update profiles"
- }
- },
- "State": {
- "available": "Available",
- "commandFailed": "Command failed",
- "downloadFailed": "Download failed",
- "downloadInsufficientNetwork": "Download insufficient network",
- "downloadInsufficientPower": "Download insufficient power",
- "downloadInsufficientSpace": "Download insufficient space",
- "downloaded": "Downloaded",
- "downloading": "Downloading",
- "idle": "Idle",
- "installFailed": "Install failed",
- "installInsufficientPower": "Install insufficient power",
- "installInsufficientSpace": "Install insufficient space",
- "installing": "Installing",
- "scheduled": "Scheduled",
- "success": "Success",
- "unknown": "Unknown"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "updateName": "Update name",
- "updateStatus": "Update status",
- "version": "Version"
- },
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by update name or version"
- },
- "SummaryBlade": {
- "subtitle": "macOS update profile",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profile"
- },
- "error": "Error",
- "errorOrErrors": "Error(s)",
- "errors": "Errors",
- "listLoadError": "Unable to load macOS software update profiles, try again later",
- "lowercase": "macOs update policy",
- "other": "Other",
- "subtitle": "MacOS software update",
- "upToDate": "Up to date",
- "uppercase": "macOS Update Policy"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Please try again later",
- "title": "Failed to delete {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Please try again later"
- },
- "LoadConfigurationFailed": {
- "description": "Please try again later",
- "title": "Failed to load {0}"
- },
- "idWrongFormat": "The provided id for the profile is not in the expected format."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "At least one time window should be selected",
- "tooMany": "A maximum of 20 time windows can be configured"
- }
- },
- "endDay": "End day",
- "endTime": "End time",
- "startDay": "Start day",
- "startTime": "Start time",
- "timeWindowError": "Choose a window of time that spans at least one hour."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load update ring profiles for Windows 10 and later."
- }
- },
- "SummaryBlade": {
- "subtitle": "Update ring for Windows 10 and later",
- "title": "Windows Update for Business"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 and later",
- "title": "Update ring for Windows 10 and later"
- },
- "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
- "lowercase": "Update ring",
- "uppercase": "Update Ring"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Update policy settings",
- "updateRingSettings": "Update ring settings"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Create {0}",
- "edit": "Edit {0}"
- }
- },
- "notScannedYet": "Not scanned yet",
- "outOfDateIosDevices": "Out of date iOS devices"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Device restrictions (device owner)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS Update policy"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Equals",
+ "greaterThan": "Greater than",
+ "greaterThanOrEqualTo": "Greater than or equal to",
+ "lessThan": "Less than",
+ "lessThanOrEqualTo": "Less than or equal to",
+ "notEqualTo": "Not equal to"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Enforce script signature check and run script silently",
+ "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
+ "header": "Use a custom detection script",
+ "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
+ "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileNotSelectedValidation": "No script file is selected.",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
+ "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Date created",
+ "dateModified": "Date modified",
+ "doesNotExist": "File or folder does not exist",
+ "fileOrFolderExists": "File or folder exists",
+ "sizeInMB": "Size in MB",
+ "version": "String (version)"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "fileOrFolder": "File or folder",
+ "fileOrFolderToolTip": "The file or folder to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "path": "Path",
+ "pathTooltip": "The full path of the folder containing the file or folder to detect.",
+ "value": "Value",
+ "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
+ },
+ "GridColumns": {
+ "pathOrCode": "Path/Code",
+ "type": "Type"
+ },
+ "MsiRule": {
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
+ "productCode": "MSI product code",
+ "productCodeTooltip": "A valid MSI product code for the app.",
+ "productVersion": "Value",
+ "productVersionCheck": "MSI product version check",
+ "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
+ "productVersionTooltip": "Enter the MSI product version for the app."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Integer comparison",
+ "keyDoesNotExist": "Key does not exist",
+ "keyExists": "Key exists",
+ "stringComparison": "String comparison",
+ "valueDoesNotExist": "Value does not exist",
+ "valueExists": "Value exists",
+ "versionComparison": "Version comparison"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "value": "Value",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the registry value to detect.",
+ "valueTooltip": "Select a value that matches the selected detection method."
+ },
+ "RuleTypeOptions": {
+ "file": "File",
+ "mSI": "MSI",
+ "registry": "Registry"
+ },
+ "gridAriaLabel": "Detection Rules",
+ "header": "Create a rule that indicates the presence of the app.",
+ "noRulesSelectedPlaceholder": "No rules are specified.",
+ "ruleTableLimit": "You can add up to 25 detection rules",
+ "ruleType": "Rule type",
+ "ruleTypeTooltip": "Choose the type of detection rule to add."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Use a custom detection script",
+ "manual": "Manually configure detection rules"
+ },
+ "bladeTitle": "Detection rules",
+ "header": "Configure app specific rules used to detect the presence of the app.",
+ "rulesFormat": "Rules format",
+ "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
+ "selectorLabel": "Detection rules"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Accept the Microsoft Software License Terms on behalf of users",
"appSuiteConfigurationLabel": "App suite configuration",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} language(s) selected",
"xmlConfigurationLabel": "XML Configuration"
},
- "Filters": {
- "ruleSyntax": "Rule syntax",
- "filters": "Filters"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Allow user to change setting",
- "tooltip": "Specify if the user is allowed to change the setting."
- },
- "AllowWorkAccounts": {
- "title": "Allow only work or school accounts",
- "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
- },
- "BlockExternalImages": {
- "title": "Block external images",
- "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
- },
- "ConfigureEmail": {
- "title": "Configure email account settings"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
- "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
- },
- "title": "Default app signature"
- },
- "OfficeFeedReplies": {
- "title": "Discover Feed",
- "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
- },
- "OrganizeMailByThread": {
- "title": "Organize mail by thread",
- "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
- },
- "PlayMyEmails": {
- "title": "Play My Emails",
- "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
- },
- "SuggestedReplies": {
- "title": "Suggested replies",
- "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
- },
- "SyncCalendars": {
- "title": "Sync Calendars",
- "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
- },
- "TextPredictions": {
- "title": "Text Predictions",
- "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
- },
- "ThemesEnabled": {
- "title": "Themes enabled",
- "tooltip": "Specify if the user is allowed to use a custom visual theme."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS devices"
- },
- "ManagedDesktop": {
- "adminContacts": "Admin contacts",
- "appPackaging": "App packaging",
- "autopatchGroups": "Autopatch groups",
- "devices": "Devices",
- "featureEnablement": "Feature activate",
- "feedback": "Feedback",
- "gettingStarted": "Getting started",
- "messages": "Messages",
- "onlineResources": "Online resources",
- "policyHealth": "Policy health",
- "policyHealthPreview": "Policy health (preview)",
- "releaseManagement": "Release management",
- "serviceRequests": "Service requests",
- "settings": "Settings",
- "supportRequests": "Support requests",
- "tenantEnrollment": "Tenant enrollment",
- "tenantManagement": "Tenant management"
- },
- "actions": "Actions for Non-Compliance",
- "advancedExchangeSettings": "Exchange online settings",
- "advancedThreatProtection": "Microsoft Defender for Endpoint",
- "allApps": "All apps",
- "allDevices": "All devices",
- "androidFotaDeployments": "Android FOTA deployments",
- "appBundles": "App Bundles",
- "appCategories": "App categories",
- "appConfigPolicies": "App configuration policies",
- "appConfigurationStatus": "App Configuration Status",
- "appInstallStatus": "App install status",
- "appLicences": "App licenses",
- "appProtectionPolicies": "App protection policies",
- "appProtectionStatus": "App Protection status",
- "appSelectiveWipe": "App selective wipe",
- "appleVppTokens": "Apple VPP Tokens",
- "apps": "Apps",
- "assign": "Assignments",
- "assignedPermissions": "Assigned permissions",
- "assignedRoles": "Assigned roles",
- "autopilotDeploymentReport": "Autopilot deployments (preview)",
- "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
- "brandingAndCustomization": "Customization",
- "cartProfiles": "Cart profiles",
- "certificateConnectors": "Certificate connectors",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Cloud attached devices (preview)",
- "cloudPcActions": "Cloud PC actions (preview)",
- "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
- "compliancePolicies": "Compliance policies",
- "complianceScriptManagement": "Scripts",
- "complianceScriptManagementPreview": "Scripts (preview)",
- "complianceSettings": "Compliance policy settings",
- "conditionStatements": "Condition statements",
- "conditions": "Locations",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Configuration profiles",
- "configurationScripts": "Configuration Scripts",
- "connectorsAndTokens": "Connectors and tokens",
- "corporateDeviceIdentifiers": "Corporate device identifiers",
- "customAttributes": "Custom attributes",
- "customNotifications": "Custom notifications",
- "deploymentSettings": "Deployment settings",
- "derivedCredentials": "Derived Credentials",
- "deviceActions": "Device actions",
- "deviceCategories": "Device categories",
- "deviceCleanUp": "Device clean-up rules",
- "deviceEnrollmentManagers": "Device enrollment managers",
- "deviceExecutionStatus": "Device status",
- "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
- "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
- "devices": "Devices",
- "discoveredApps": "Discovered apps",
- "edgePolicies": "Policies for Microsoft Edge",
- "embeddedSIM": "eSIM cellular profiles (preview)",
- "enrollDevices": "Enroll devices",
- "enrollmentFailures": "Enrollment failures",
- "enrollmentNotifications": "Enrollment notifications (preview)",
- "enrollmentRestrictions": "Enrollment restrictions",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange service connectors",
- "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
- "failuresForDriverUpdates": "Windows Driver update failures",
- "failuresForFeatureUpdates": "Feature update failures",
- "failuresForQualityUpdates": "Windows Expedited update failures",
- "featureFlighting": "Feature flighting",
- "featureUpdateDeployments": "Feature updates for Windows 10 and later",
- "flighting": "Flighting",
- "fotaUpdate": "Firmware over-the-air update",
- "groupPolicy": "Administrative Templates",
- "groupPolicyAnalytics": "Group policy analytics",
- "helpSupport": "Help and support",
- "helpSupportReplacement": "Help and support ({0})",
- "iOSAppProvisioning": "iOS app provisioning profiles",
- "incompleteUserEnrollments": "Incomplete user enrollments",
- "iosUpdates": "Update policies for iOS/iPadOS",
- "legacyPcManagement": "Legacy PC management",
- "macOSSoftwareUpdate": "Update policies for macOS",
- "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
- "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
- "macOSSoftwareUpdateStateSummaries": "updates",
- "managedGooglePlay": "Managed Google Play",
- "msfb": "Microsoft Store for Business",
- "myPermissions": "My permissions",
- "notifications": "Notifications",
- "officeApps": "Office apps",
- "officeProPlusPolicies": "Policies for Office apps",
- "onPremise": "On Premise",
- "onPremisesConnector": "Exchange ActiveSync on-premises connector",
- "onPremisesDeviceAccess": "Exchange ActiveSync devices",
- "onPremisesManageAccess": "Exchange on-premises access",
- "outOfDateIosDevices": "Installation failures for iOS devices",
- "overview": "Overview",
- "partnerDeviceManagement": "Partner device management",
- "perUpdateRingDeploymentState": "Per update ring deployment state",
- "permissions": "Permissions",
- "platformApps": "{0} apps",
- "platformDevices": "{0} devices",
- "platformEnrollment": "{0} enrollment",
- "policies": "Policies",
- "profiles": "Profiles",
- "properties": "Properties",
- "reports": "Reports",
- "retireNoncompliantDevices": "Retire noncompliant devices",
- "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
- "role": "Role",
- "scriptManagement": "Scripts",
- "securityBaselines": "Security baselines",
- "serviceToServiceConnector": "Exchange online connector",
- "servicenowConnector": "ServiceNow connector",
- "shellScripts": "Shell scripts",
- "teamViewerConnector": "TeamViewer connector",
- "telecomeExpenseManagement": "Telecom expense management",
- "tenantAdmin": "Tenant admin",
- "tenantAdministration": "Tenant administration",
- "termsAndConditions": "Terms and conditions",
- "titles": "Titles",
- "troubleshoot": "Troubleshoot",
- "troubleshootSupport": "Troubleshooting + support",
- "user": "User",
- "userExecutionStatus": "User status",
- "wdacSupplementalPolicies": "S mode supplemental policies",
- "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
- "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
- "windows10DriverUpdate": "Driver updates for Windows 10 and later",
- "windows10QualityUpdate": "Quality updates for Windows 10 and later",
- "windows10UpdateRings": "Update rings for Windows 10 and later",
- "windows10XPolicyFailures": "Windows 10X policy failures",
- "windows365PartnerConnector": "Windows 365 partner connectors",
- "windowsDiagnosticData": "Windows data",
- "windowsEnterpriseCertificate": "Windows enterprise certificate",
- "windowsManagement": "Scripts",
- "windowsSideLoadingKeys": "Windows side loading keys",
- "windowsSymantecCertificate": "Windows DigiCert certificate",
- "windowsThreatReport": "Threat agent status"
- },
- "ScopeTypes": {
- "allDevices": "All Devices",
- "allUsers": "All Users",
- "allUsersAndDevices": "All Users & All Devices",
- "selectedGroups": "Selected Groups"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search as default",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype for Business",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone and iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Not supported",
+ "supportEnding": "Support ending",
+ "supported": "Supported"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Default",
- "header": "Update Priority",
- "postponed": "Postponed",
- "priority": "High Priority"
- },
- "AutoUpdateSupersededApps": {
- "label": "Auto-update",
- "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Allow user to snooze the restart notification",
- "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
- "durationInMinutes": "Device restart grace period (minutes)",
- "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Time zone",
- "local": "Device time zone",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Date and time",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
- "deadlineTimeLabel": "App installation deadline",
- "defaultTime": "As soon as possible",
- "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
- "specificTime": "A specific date and time",
- "startTimeColumnLabel": "Availability",
- "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
- "startTimeLabel": "App availability"
- },
- "restartGracePeriodHeader": "Restart grace period",
- "restartGracePeriodLabel": "Device restart grace period",
- "summaryTitle": "End user experience"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "The file or folder as the selected requirement.",
- "pathToolTip": "The complete path of the file or folder to detect.",
- "property": "Property",
- "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
- },
- "GridColumns": {
- "pathOrScript": "Path/Script",
- "type": "Type"
- },
- "Registry": {
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the comparison.",
- "registryRequirement": "Registry key requirement",
- "registryRequirementTooltip": "Select the registry key requirement comparison.",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the required registry value."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Automatically approve all recommended driver updates",
+ "manual": "Manually approve and deploy driver updates"
+ },
+ "BulkActions": {
+ "button": "Bulk actions"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Approval method:"
},
- "RequirementTypeOptions": {
- "fileType": "File",
- "registry": "Registry",
- "script": "Script"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Boolean",
- "dateTime": "Date and Time",
- "float": "Floating Point",
- "integer": "Integer",
- "string": "String",
- "version": "Version"
- },
- "duplicateName": "Script name {0} has already been used. Please enter a different name.",
- "enforceSignatureCheck": "Enforce script signature check",
- "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
- "loggedOnCredentials": "Run this script using the logged on credentials",
- "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
- "operatorTooltip": "Select the operator for the requirement comparison.",
- "requirementMethod": "Select output data type",
- "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
- "scriptName": "Script name",
- "value": "Value",
- "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ "DeploymentDeferralInDays": {
+ "label": "Make updates available after",
+ "units": "(days)",
+ "value": "{0} days"
+ },
+ "DriverAction": {
+ "header": "Select an action below.",
+ "label": "Driver action",
+ "placeholder": "Select an action"
},
- "bladeTitle": "Add a Requirement rule",
- "createRequirementHeader": "Create a requirement.",
- "header": "Configure additional requirement rules",
- "label": "Additional requirement rules",
- "noRequirementsSelectedPlaceholder": "No requirements are specified.",
- "requirementType": "Requirement type",
- "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
- },
- "architectures": "Operating system architecture",
- "architecturesTooltip": "Choose the architectures needed to install the app.",
- "bladeTitle": "Requirements",
- "diskSpace": "Disk space required (MB)",
- "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
- "header": "Specify the requirements that devices must meet before the app is installed:",
- "maximumTextFieldValue": "The value must be at most {0}.",
- "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
- "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
- "minimumLogicalProcessors": "Minimum number of logical processors required",
- "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
- "minimumOperatingSystem": "Minimum operating system",
- "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
- "minumumTextFieldValue": "The value must be at least {0}.",
- "physicalMemory": "Physical memory required (MB)",
- "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
- "selectorLabel": "Requirements",
- "validNumber": "Please enter a valid number."
- },
- "PolicySet": {
- "appManagement": "Application management",
- "assignments": "Assignments",
- "basics": "Basics",
- "deviceEnrollment": "Device enrollment",
- "deviceManagement": "Device management",
- "scopeTags": "Scope tags",
- "appConfigurationTitle": "App configuration policies",
- "appProtectionTitle": "App protection policies",
- "appTitle": "Apps",
- "iOSAppProvisioningTitle": "iOS app provisioning profiles",
- "deviceLimitRestrictionTitle": "Device limit restrictions",
- "deviceTypeRestrictionTitle": "Device type restrictions",
- "enrollmentStatusSettingTitle": "Enrollment status pages",
- "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
- "deviceComplianceTitle": "Device compliance policies",
- "deviceConfigurationTitle": "Device configuration profiles",
- "powershellScriptTitle": "Powershell scripts"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Included drivers"
+ },
+ "SelectDrivers": {
+ "header": "Select drivers to include in your bulk action"
+ },
+ "SelectDriversToInclude": {
+ "button": "Select drivers to include"
+ },
+ "SelectLessDrivers": {
+ "validation": "At most one hundred drivers can be selected"
+ },
+ "SelectMoreDrivers": {
+ "validation": "At least one driver should be selected"
+ },
+ "SelectedDrivers": {
+ "label": "Selected drivers"
+ },
+ "availabilityDate": "Make available in Windows Update",
+ "bladeTitle": "Driver updates Windows 10 and later (preview)",
+ "lastSync": "Last sync:",
+ "lastSyncDefaultText": "Pending initial inventory collection",
+ "loadError": "Loading failed!"
+ },
+ "DriverStatus": {
+ "approved": "Approved",
+ "declined": "Declined",
+ "export": "Exporting recommended drivers",
+ "needsReview": "Needs review",
+ "paused": "Paused"
+ },
+ "DriversToReview": {
+ "text": "{0} to review"
+ },
+ "Subtitle": {
+ "automatic": "Automatic approval driver update policy",
+ "manual": "Manual approval driver update policy"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Recommended",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrain",
- "countryNameZA": "South Africa",
- "countryNameJO": "Jordan",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Czech Republic",
- "countryNameLT": "Lithuania",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hong Kong SAR",
- "countryNameGH": "Ghana",
- "countryNameSA": "Saudi Arabia",
- "countryNamePG": "Papua New Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "India",
- "countryNameHN": "Honduras",
- "countryNameRO": "Romania",
- "countryNameKZ": "Kazakhstan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Georgia",
- "countryNameTT": "Trinidad and Tobago",
- "countryNameMP": "Northern Mariana Islands",
- "countryNameMV": "Maldives",
- "countryNameFI": "Finland",
- "countryNameNO": "Norway",
- "countryNameEE": "Estonia",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Uzbekistan",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tajikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "France",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italy",
- "countryNameAZ": "Azerbaijan",
- "countryNameKG": "Kyrgyzstan",
- "countryNameWF": "Wallis and Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falkland Islands (Islas Malvinas)",
- "countryNameGY": "Guyana",
- "countryNameSS": "South Sudan",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Syria",
- "countryNameMD": "Moldova",
- "countryNameVC": "Saint Vincent and the Grenadines",
- "countryNameID": "Indonesia",
- "countryNameRE": "Reunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "North Macedonia",
- "countryNameTG": "Togo",
- "countryNamePF": "French Polynesia",
- "countryNameKY": "Cayman Islands",
- "countryNameIO": "British Indian Ocean Territory",
- "countryNameRU": "Russia",
- "countryNameMA": "Morocco",
- "countryNameAU": "Australia",
- "countryNameBO": "Bolivia",
- "countryNameVA": "Holy See (Vatican City State)",
- "countryNameVG": "Virgin Islands, British",
- "countryNameFM": "Micronesia",
- "countryNameAQ": "Antarctica",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brazil",
- "countryNameIS": "Iceland",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgaria",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamas, The",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macao SAR",
- "countryNameRW": "Rwanda",
- "countryNameAS": "American Samoa",
- "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
- "countryNameMF": "Saint Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "New Caledonia",
- "countryNameAC": "Ascension Island",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladesh",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Canada",
- "countryNameSH": "Saint Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolia",
- "countryNamePA": "Panama",
- "countryNameCM": "Cameroon",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japan",
- "countryNameCY": "Cyprus",
- "countryNameCD": "Democratic Republic of Congo",
- "countryNameTN": "Tunisia",
- "countryNameTR": "Türkiye",
- "countryNameWS": "Samoa",
- "countryNameSE": "Sweden",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Cambodia",
- "countryNamePL": "Poland",
- "countryNameDZ": "Algeria",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominica",
- "countryNameEG": "Egypt",
- "countryNameGF": "French Guiana",
- "countryNameNZ": "New Zealand",
- "countryNamePS": "Palestinian Authority",
- "countryNameIL": "Israel",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Greece",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauritania",
- "countryNameVI": "Virgin Islands, U.S.",
- "countryNameGQ": "Equatorial Guinea",
- "countryNameMX": "Mexico",
- "countryNameDJ": "Djibouti",
- "countryNameGN": "Guinea",
- "countryNameCN": "China",
- "countryNameMZ": "Mozambique",
- "countryNameBV": "Bouvet Island",
- "countryNameNF": "Norfolk Island",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "South Georgia and the South Sandwich Islands",
- "countryNameRS": "Serbia",
- "countryNameCC": "Cocos (Keeling) Islands",
- "countryNameNA": "Namibia",
- "countryNameDE": "Germany",
- "countryNameCG": "Republic of Congo",
- "countryNameKW": "Kuwait",
- "countryNameMH": "Marshall Islands",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarus",
- "countryNameMY": "Malaysia",
- "countryNameST": "São Tomé and Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Chad",
- "countryNameCX": "Christmas Island",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bissau",
- "countryNameUA": "Ukraine",
- "countryNameCU": "Cuba",
- "countryNameCO": "Colombia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Croatia",
- "countryNameSC": "Seychelles",
- "countryNameNL": "Netherlands",
- "countryNameUM": "US Minor Outlying Islands",
- "countryNameIM": "Isle of Man",
- "countryNameFJ": "Fiji",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "United Kingdom",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovenia",
- "countryNameAM": "Armenia",
- "countryNameAR": "Argentina",
- "countryNamePM": "Saint Pierre and Miquelon",
- "countryNameTF": "French Southern and Antarctic Lands",
- "countryNameDO": "Dominican Republic",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugal",
- "countryNameCF": "Central African Republic",
- "countryNameBE": "Belgium",
- "countryNameKM": "Comoros",
- "countryNameLY": "Libya",
- "countryNameIE": "Ireland",
- "countryNameKP": "North Korea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slovakia",
- "countryNameTC": "Turks and Caicos Islands",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Yemen",
- "countryNameBA": "Bosnia and Herzegovina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Iraq",
- "countryNameSJ": "Svalbard and Jan Mayen Island",
- "countryNameAX": "Åland Islands",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Faroe Islands",
- "countryNameBL": "Saint Barthélemy",
- "countryNameLB": "Lebanon",
- "countryNameJM": "Jamaica",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Spain",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapore",
- "countryNameAL": "Albania",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d’Ivoire",
- "countryNameTW": "Taiwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cook Islands",
- "countryNameTH": "Thailand",
- "countryNameHM": "Heard Island and McDonald Islands",
- "countryNameGD": "Grenada",
- "countryNameUS": "United States",
- "countryNameAT": "Austria",
- "countryNameKR": "Korea, Republic of",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Denmark",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Ethiopia",
- "countryNameMG": "Madagascar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxembourg",
- "countryNameQA": "Qatar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Solomon Islands",
- "countryNameAE": "United Arab Emirates",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua and Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Hungary",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Switzerland",
- "countryNamePN": "Pitcairn Islands",
- "countryNameGL": "Greenland",
- "countryNamePH": "Philippines",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts and Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Latvia",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "Unable to sync {0}",
+ "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
+ "pending": "{0} sync in progress",
+ "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
+ "success": "{0} sync complete",
+ "successDescription": "Sync with WUfB service completed at {0}"
+ },
+ "SyncSpinner": {
+ "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
+ },
+ "TabName": {
+ "basics": "Basics",
+ "driverUpdateSettings": "Settings",
+ "otherDrivers": "Other drivers",
+ "properties": "Properties",
+ "recommendedDrivers": "Recommended drivers"
+ },
+ "driverAddFilter": "Add filter",
+ "driverApplicableDevices": "Applicable devices",
+ "driverApprovalStatus": "Status",
+ "driverBulkActions": "Bulk actions",
+ "driverClass": "Driver class",
+ "driverCount": "Showing {0} to {1} of {2} records",
+ "driverFilterNoneSelected": "None selected",
+ "driverManufacturer": "Manufacturer",
+ "driverName": "Driver name",
+ "driverNameLower": "windows driver update deployment",
+ "driverNameUpper": "Windows driver update deployment",
+ "driverRefresh": "Refresh",
+ "driverReleaseDate": "Release date",
+ "driverSearch": "Search",
+ "driverSearchKeyword": "Enter search keyword",
+ "driverVersion": "Version",
+ "firstDeploymentDate": "First Deployment",
+ "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
+ "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge configuration settings",
+ "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
+ "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
+ "generalAppConfig": "General app configuration",
+ "generalSettings": "General configuration settings",
+ "outlookSMIMEConfig": "Outlook S/MIME settings",
+ "outlookSettings": "Outlook configuration settings",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-zh-hans.json b/Documentation/Strings-zh-hans.json
index a9df2c5..3af3bf1 100644
--- a/Documentation/Strings-zh-hans.json
+++ b/Documentation/Strings-zh-hans.json
@@ -1,640 +1,62 @@
{
- "OutlookAppConfig": {
- "DataProtectionConfiguration": {
- "header": "数据保护配置"
- },
- "OrganizeMailByThread": {
- "title": "按线程组织邮件",
- "tooltip": "Outlook 中的默认行为是将邮件对话捆绑到链式对话视图中。如果禁用此设置,Outlook 将单独显示每个邮件,不会按线程对其进行分组。"
- },
- "Sync": {
- "header": "将联系人字段同步到本机联系人应用配置"
- },
- "allowBiometricsAllowUserChangeTooltip": "指定是否允许用户更改设置。",
- "allowBiometricsTitle": "需要生物识别才可访问应用",
- "allowBiometricsTooltip": "可要求用户提供 TouchID 或 FaceID 等生物识别才能访问其设备上的应用。如果要求此项,则除了此配置文件中所选的身份验证方法之外,还使用生物识别。如果已部署 Intune 应用保护策略,则不应启用此设置,因为应用保护策略中规定了在访问托管数据之前需满足的访问要求。如果两项均启用,则在访问 Outlook 移动版时将出现多个访问提示。如果设置为“未配置”,则默认应用设置设为“关”。",
- "allowCalendarNotificationsAllowUserChangeTooltip": "指定是否允许用户更改设置。",
- "allowCalendarNotificationsTitle": "日历通知",
- "allowCalendarNotificationsTooltip": "当“组织数据通知”这一应用保护策略设置设置为“阻止组织数据”时,允许日历通知显示完整详细信息。",
- "allowDefaultAppSignatureTitle": "默认应用签名",
- "allowDefaultAppSignatureTooltip": "默认应用签名指示应用是否要在消息撰写期间将“获取 Outlook for iOS”用作默认签名。如果此设置配置为“关”,则不使用默认签名;但是,用户可添加自己的签名。 当设置为“未配置”时,默认应用设置设为“开”。",
- "allowExternalRecipientsMailTipTitle": "外部收件人邮件提示",
- "allowExternalRecipientsMailTipTooltip": "如果发件人添加外部收件人或添加包含外部收件人的通讯组,则显示外部收件人邮件提示。此邮件提示通知发件人其正在撰写的邮件是否将发送到组织外部,从而帮助他们就选词、语调和内容作出正确决定。此功能仅适用于使用混合新式验证的 Exchange Online 帐户和本地帐户。如果设置为“未配置”,则默认应用设置设为“开”。",
- "allowFocusedInboxTitle": "重点收件箱",
- "allowFocusedInboxTooltip": "重点收件箱将你的收件箱划分到两个标签页 -“重点”和“其他”。最重要的电子邮件位于“重点”标签页上,而其余邮件保留在“其他”标签页上,从而保证可轻松访问但不干扰显示。如果设置为“未配置”,则默认应用设置设为“关”。",
- "allowMailNotificationsAllowUserChangeTooltip": "指定是否允许用户更改设置。",
- "allowMailNotificationsTitle": "邮件通知",
- "allowMailNotificationsTooltip": "此值指定 Outlook 是否将允许邮件通知。将此值设置为“否”会禁用邮件通知。",
- "allowOrgDataOnWearablesTitle": "可穿戴设备上的组织数据",
- "allowOrgDataOnWearablesTooltip": "此值指定 Outlook 数据能否同步到可穿戴设备。将此值设置为“否”会禁用可穿戴设备同步。",
- "allowSaveContactsAllowUserChangeTooltip": "指定是否允许用户更改联系人同步设置。",
- "allowSaveContactsTitle": "保存联系人",
- "allowSaveContactsTooltip": "如果将联系人保存到移动设备的本机通讯簿,则新的呼叫和短信将与用户的现有 Outlook 联系人进行匹配。如果设置为“未配置”,则默认应用设置设为“关”。",
- "allowSmartReplyAndroidAllowUserChangeTooltip": "指定是否允许用户更改设置。",
- "allowSmartReplyTitle": "建议的答复",
- "allowSmartReplyTooltip": "在你打开邮件时,Outlook 可能会在邮件下方建议答复。如果选择所建议的答复,可在发送前对其进行编辑。设置为未配置时,默认应用设置设为“开”。",
- "allowUserChangeGeneralToolTip": "指定是否允许用户更改设置。",
- "allowUserChangeTitle": "允许用户更改设置",
- "blockExternalImagesAllowUserChangeTooltip": "指定是否允许用户更改设置。",
- "blockExternalImagesTitle": "阻止外部图像",
- "blockExternalImagesTooltip": "启用阻止外部图像后,应用将阻止下载通过 Internet(嵌入在邮件正文中)托管的图像。如果设置为“未配置”,则默认应用设置设为“关”。",
- "disableAddinsTitle": "允许加载项",
- "disableAddinsTooltip": "默认情况下,应用保护策略允许用户使用第三方外接程序,但可以使用“将策略托管应用数据与本机应用或外接程序同步”设置来阻止外接程序。当应用保护策略设置设置为“允许”时,将此设置配置为“关闭”将阻止加载项。",
- "discoverFeedTitle": "发现源",
- "discoverFeedTooltip": "通过发现源,可查看最常访问的 Office 文件。默认情况下,在为用户启用 Delve 时启用此源。在设置为“未配置”时,默认应用设置设为“开”。",
- "enableSMIMETitle": "启用 S/MIME",
- "enableSMIMETooltip": "指定是否要在撰写电子邮件时启用 S/MIME 控件。",
- "encryptAllEmails": "加密所有电子邮件",
- "encryptAllEmailsAllowUserChangeTooltip": "指定是否允许用户更改“加密所有电子邮件”设置。",
- "encryptAllEmailsTooltip": "指定是否必须加密所有电子邮件。通过加密,可将数据转换为码文本,以便只有预期收件人可阅读该数据。",
- "ldapUrl": "LDAP URL",
- "ldapUrlTooltip": "这是客户端可由其获取电子邮件收件人公共加密密钥的 LDAP 主机名。当有密钥可用时,将加密电子邮件。支持的格式: \r\n
啟用虛擬化型安全性: 於下次重新開機時開啟虛擬化型安全性 (VBS)。虛擬化型安全性使用 Windows Hypervisor 提供安全性服務的支援。
\r\n \r\n
使用直接記憶體存取的安全開機: 使用安全開機與直接記憶體存取 (DMA) 來開啟 VBS。
\r\n
\r\n ",
+ "windows10EndpointProtectionDeviceGuard": "請選擇其他需要稽核,或者是可以信任由 Microsoft Defender 應用程式控制執行的應用程式。Windows 元件及來自 Microsoft Store 的所有應用程式都會直接受信任並執行。
啟用虛擬化型安全性: 於下次重新開機時開啟虛擬化型安全性 (VBS)。虛擬化型安全性使用 Windows Hypervisor 提供安全性服務的支援。
\r\n \r\n
使用直接記憶體存取的安全開機: 使用安全開機與直接記憶體存取 (DMA) 來開啟 VBS。
\r\n
\r\n ",
- "windows10EndpointProtectionDeviceGuard": "請選擇其他需要稽核,或者是可以信任由 Microsoft Defender 應用程式控制執行的應用程式。Windows 元件及來自 Microsoft Store 的所有應用程式都會直接受信任並執行。
\n",
- "label": "持續性瀏覽器工作階段",
- "never": "永不持續"
- },
- "Warning": {
- "allApps": "持續性瀏覽器工作階段只會在已選取 [所有雲端應用程式] 時正常運作。請變更您的雲端應用程式選取項目。若要深入了解,請按一下這裡。"
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "小時或天",
- "value": "頻率"
- },
- "Option": {
- "Day": {
- "plural": "{0} 天",
- "singular": "1 天"
- },
- "Hour": {
- "plural": "{0} 小時",
- "singular": "1 小時"
- },
- "daysOption": "天",
- "everytime": "每次",
- "help": "經過這段時間後,在使用者嘗試存取資源時要求再次登入。預設設定是一段連續 90 天的時間,也就是說,若使用者在電腦上有 90 天以上的時間處於非使用中狀態,系統會在他們之後初次嘗試存取資源時要求重新驗證。",
- "hoursOption": "小時",
- "label": "登入頻率",
- "placeholder": "選取單位"
- }
- },
- "mainOption": "修改工作階段存留期",
- "mainOptionHelp": "設定使用者收到提示的頻率,及瀏覽器工作階段是否會持續。不支援新式驗證通訊協定的應用程式可能無法遵循這些原則。若遇到這種情況,請連絡應用程式開發人員。"
- },
- "SingleSelectorActive": {
- "failed": "無法載入此資料。",
- "reattempt": "正在載入資料。重試 {0}/{1}。"
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "選擇目錄角色"
- },
- "Excluded": {
- "gridAria": "已排除使用者的清單"
- },
- "Included": {
- "gridAria": "已包含使用者的清單"
- },
- "Validation": {
- "customRoleIncluded": "「目錄角色」包含至少一個自訂角色",
- "customRoleSelected": "已選取至少一個自訂角色",
- "failed": "必須設定 \"{0}\"",
- "roles": "至少選取一個角色",
- "usersGroups": "至少選取一個使用者或群組"
- },
- "learnMore": "根據原則的適用者來控制存取權,例如使用者和群組、工作負載身分、目錄角色或外部來賓。"
- },
- "advancedTabText": "進階",
- "allCloudAppsErrorBox": "選取 [需要密碼變更] 授與時,必須選取 [所有雲端應用程式]",
- "allCloudAppsReauth": "選取 [每次登入頻率] 工作階段控制項及 [登入風險] 條件時,必須選取 [所有雲端應用程式]",
- "allCloudOrSpecificApps": "「每次登入頻率」工作階段控制項需要選取「所有雲端應用程式」或特別支援的應用程式",
- "allDayCheckboxLabel": "全天",
- "allDevicePlatforms": "任何裝置",
- "allGuestUserInfoContent": "包含 Microsoft Entra B2B 來賓,但不包含 SharePoint B2B 來賓",
- "allGuestUserLabel": "所有來賓與外部使用者",
- "allRiskLevelsOption": "所有風險等級",
- "allTrustedLocationLabel": "所有信任的位置",
- "allUserGroupSetSelectorLabel": "選取的所有使用者與群組",
- "allUsersReauth": "必須選取 「所有使用者」的「每次登入頻率」工作階段控制項",
- "allUsersString": "所有使用者",
- "and": "{0} 與 {1}",
- "andWithGrouping": "({0}) 與 {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "任何雲端應用程式",
- "appContextOptionInfoContent": "要求的驗證標籤",
- "appContextOptionLabel": "要求的驗證標籤 (預覽)",
- "appContextUriPlaceholder": "範例: uri:contoso.com:level3",
- "appEnforceInfoBubble": "應用程式強制限制可能需要在雲端應用程式內具有額外的管理員設定。該類限制只為對新的工作階段產生效用。",
- "appNotSetSeletorLabel": "已選取 0 個雲端應用程式",
- "appReauthNotSupported": "此應用程式不支援「每次的登入頻率」工作模式控制項。",
- "applyConditionClientAppInfoBalloonContent": "設定用戶端應用程式,將原則套用至特定用戶端應用程式",
- "applyConditionDevicePlatformInfoBalloonContent": "設定裝置平台,將原則套用至特定平台",
- "applyConditionDeviceStateInfoBalloonContent": "設定裝置狀態以將原則套用至特定裝置狀態",
- "applyConditionLocationInfoBalloonContent": "設定位置,將原則套用至受信任/不受信任的位置",
- "applyConditionSigninRiskInfoBalloonContent": "設定登入風險,將原則套用至選取的風險層級",
- "applyConditionUserRiskInfoBalloonContent": "設定使用者風險,將原則套用至選取的風險層級",
- "applyConditonLabel": "設定",
- "ariaLabelPolicyDisabled": "原則已停用",
- "ariaLabelPolicyEnabled": "已啟用原則",
- "ariaLabelPolicyReportOnly": "原則處於僅限報表模式",
- "blockAccess": "封鎖存取",
- "builtInDirectoryRoleLabel": "內建目錄角色",
- "casCustomControlInfo": "必須在 Cloud App Security 入口網站中設定自訂原則。這個控制項會立即對所有精選應用程式生效,且能針對任何應用程式自行導入。按一下這裡即可深入了解這兩種情形。",
- "casInfoBubble": "此控制項適用於多種雲端應用程式。",
- "casPreconfiguredControlInfo": "這個控制項會立即對所有精選應用程式生效,且能針對任何應用程式自行導入。按一下這裡即可深入了解這兩種情形。",
- "cert64DownloadCol": "下載 base64 憑證",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "下載憑證",
- "certDurationCol": "到期日",
- "certDurationStartCol": "有效期限自",
- "certName": "VpnCert",
- "certainApps": "如果未選取 [需要多重要素驗證] 和 [需要密碼變更] 授與,則 「每次登入頻率」僅支援特定應用程式",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "選擇應用程式",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "選擇的應用程式",
- "chooseApplicationsEmpty": "沒有應用程式",
- "chooseApplicationsNone": "無",
- "chooseApplicationsNoneFound": "找不到 \"{0}\"。請嘗試其他名稱或識別碼。",
- "chooseApplicationsPlural": "{0} 與另外 {1} 個",
- "chooseApplicationsReAuthEverytimeInfo": "正在尋找您的應用程式? 某些應用程式無法與「需要重新驗證 – 每次」工作階段控制一起使用",
- "chooseApplicationsRemove": "移除",
- "chooseApplicationsReturnedPlural": "找到 {0} 個應用程式",
- "chooseApplicationsReturnedSingular": "找到 1 個應用程式",
- "chooseApplicationsSearchBalloon": "輸入應用程式名稱或識別碼,搜尋應用程式。",
- "chooseApplicationsSearchHint": "搜尋應用程式...",
- "chooseApplicationsSearchLabel": "應用程式",
- "chooseApplicationsSearching": "搜尋中...",
- "chooseApplicationsSelect": "選取",
- "chooseApplicationsSelected": "已選取",
- "chooseApplicationsSingular": "{0} 與另外 1 個",
- "chooseApplicationsTooMany": "結果超過可顯示的數量。請使用搜尋方塊篩選。",
- "chooseLocationCorpnetItem": "公司網路",
- "chooseLocationSelectedLocationsLabel": "選取的位置",
- "chooseLocationTrustedIpsItem": "多重要素驗證受信任的 IP",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "選擇位置",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "選擇的位置",
- "chooseLocationsEmpty": "沒有位置",
- "chooseLocationsExcludedSelectorTitle": "選取",
- "chooseLocationsIncludedSelectorTitle": "選取",
- "chooseLocationsNone": "無",
- "chooseLocationsNoneFound": "找不到 \"{0}\"。請嘗試其他名稱或識別碼。",
- "chooseLocationsPlural": "{0} 與另外 {1} 個",
- "chooseLocationsRemove": "移除",
- "chooseLocationsReturnedPlural": "找到 {0} 個位置",
- "chooseLocationsReturnedSingular": "找到 1 個位置",
- "chooseLocationsSearchBalloon": "輸入其名稱以搜尋位置。",
- "chooseLocationsSearchHint": "搜尋位置...",
- "chooseLocationsSearchLabel": "位置",
- "chooseLocationsSearching": "搜尋中...",
- "chooseLocationsSelect": "選取",
- "chooseLocationsSelected": "已選取",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "選取",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "選取",
- "chooseLocationsSingular": "{0} 與另外 1 個",
- "chooseLocationsTooMany": "結果超過可顯示的數量。請使用搜尋方塊篩選。",
- "claimProviderAddCommandText": "新增自訂控制項",
- "claimProviderAddNewBladeTitle": "新增自訂控制項",
- "claimProviderDeleteCommand": "刪除",
- "claimProviderDeleteDescription": "確定要刪除 '{0}' 嗎? 此動作無法復原。",
- "claimProviderDeleteTitle": "確定嗎?",
- "claimProviderEditInfoText": "為宣告提供者所指定的自訂控制輸入 JSON。",
- "claimProviderNotificationCreateDescription": "正在建立名為 '{0}' 的自訂控制項",
- "claimProviderNotificationCreateFailedDescription": "建立自訂控制項 '{0}' 失敗。請稍後再試一次。",
- "claimProviderNotificationCreateFailedTitle": "無法建立自訂控制項",
- "claimProviderNotificationCreateSuccessDescription": "已建立名為 '{0}' 的自訂控制項",
- "claimProviderNotificationCreateSuccessTitle": "已建立 '{0}'",
- "claimProviderNotificationCreateTitle": "正在建立 '{0}'",
- "claimProviderNotificationDeleteDescription": "正在刪除名為 '{0}' 的自訂控制項",
- "claimProviderNotificationDeleteFailedDescription": "刪除自訂控制項 '{0}' 失敗。請稍後再試一次。",
- "claimProviderNotificationDeleteFailedTitle": "無法刪除自訂控制項",
- "claimProviderNotificationDeleteSuccessDescription": "已刪除名為 '{0}' 的自訂控制項",
- "claimProviderNotificationDeleteSuccessTitle": "已刪除 '{0}'",
- "claimProviderNotificationDeleteTitle": "正在刪除 '{0}'",
- "claimProviderNotificationUpdateDescription": "正在更新名為 '{0}' 的自訂控制項",
- "claimProviderNotificationUpdateFailedDescription": "更新自訂控制項 '{0}' 失敗。請稍後再試一次。",
- "claimProviderNotificationUpdateFailedTitle": "無法更新自訂控制項",
- "claimProviderNotificationUpdateSuccessDescription": "已更新名為 '{0}' 的自訂控制項",
- "claimProviderNotificationUpdateSuccessTitle": "已更新 '{0}'",
- "claimProviderNotificationUpdateTitle": "正在更新 '{0}'",
- "claimProviderValidationAppIdInvalid": "\"AppId\" 值無效。請檢閱後再試一次。",
- "claimProviderValidationClientIdMissing": "資料遺漏了 \"ClientId\" 值。請檢閱後再試一次。",
- "claimProviderValidationControlClaimsRequestedMissing": "\"Control\" 項目遺漏了 \"ClaimsRequested\" 值。請檢閱後再試一次。",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "\"ClaimsRequested\" 項目遺漏了 \"Type\" 值。請檢閱後再試一次。",
- "claimProviderValidationControlIdAlreadyExists": "\"Control\" \"Id\" 值已存在。請檢閱後再試一次。",
- "claimProviderValidationControlIdMissing": "\"Control\" 項目遺漏了 \"Id\" 值。請檢閱後再試一次。",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "因為在現有原則中參考了 \"Control\" \"Id\" 值,所以無法將其移除。請先將它從原則中移除。",
- "claimProviderValidationControlIdTooManyControls": "\"Control\" 屬性有過多控制項。請檢閱後再試一次。",
- "claimProviderValidationControlIdValueReserved": "\"Control\" \"Id\" 值是保留關鍵字,請使用不同的識別碼。",
- "claimProviderValidationControlNameAlreadyExists": "\"Control\" \"Name\" 值已存在。請檢閱後再試一次。",
- "claimProviderValidationControlNameMissing": "\"Control\" 項目遺漏了 \"Name\" 值。請檢閱後再試一次。",
- "claimProviderValidationControlsMissing": "資料遺漏了 \"Controls\" 值。請檢閱後再試一次。",
- "claimProviderValidationDiscoveryUrlMissing": "資料遺漏了 \"DiscoveryUrl\" 值。請檢閱後再試一次。",
- "claimProviderValidationInvalid": "提供的資料無效。請檢閱後再試一次。",
- "claimProviderValidationInvalidJsonDefinition": "無法儲存自訂控制項。請檢閱 JSON 文字後再試一次。",
- "claimProviderValidationNameAlreadyExists": "\"Name\" 值已存在。請檢閱後再試一次。",
- "claimProviderValidationNameMissing": "資料遺漏了 \"Name\" 值。請檢閱後再試一次。",
- "claimProviderValidationUnknown": "驗證提供的資料時,發生未知的錯誤。請檢閱後再試一次。",
- "claimProvidersNone": "沒有任何自訂控制項",
- "claimProvidersSearchPlaceholder": "搜尋控制項。",
- "classicPoilcyFilterTitle": "顯示",
- "classicPolicyAllPlatforms": "所有平台",
- "classicPolicyClientAppBrowserAndNative": "瀏覽器、行動裝置應用程式與電腦用戶端",
- "classicPolicyCloudAppTitle": "雲端應用程式",
- "classicPolicyControlAllow": "允許",
- "classicPolicyControlBlock": "封鎖",
- "classicPolicyControlBlockWhenNotAtWork": "不工作時封鎖存取",
- "classicPolicyControlRequireCompliantDevice": "需要符合規範裝置",
- "classicPolicyControlRequireDomainJoinedDevice": "要求已加入網域的裝置",
- "classicPolicyControlRequireMfa": "需要多重要素驗證",
- "classicPolicyControlRequireMfaWhenNotAtWork": "不在工作時需要多重要素驗證",
- "classicPolicyDeleteCommand": "刪除",
- "classicPolicyDeleteFailTitle": "無法刪除傳統原則",
- "classicPolicyDeleteInProgressTitle": "正在刪除傳統原則",
- "classicPolicyDeleteSuccessTitle": "已刪除傳統原則",
- "classicPolicyDetailBladeTitle": "詳細資料",
- "classicPolicyDisableCommand": "停用",
- "classicPolicyDisableConfirmation": "確定要停用 '{0}' 嗎? 此動作無法復原。",
- "classicPolicyDisableFailDescription": "無法停用 '{0}'",
- "classicPolicyDisableFailTitle": "無法停用傳統原則",
- "classicPolicyDisableInProgressDescription": "正在停用 '{0}'",
- "classicPolicyDisableInProgressTitle": "正在停用傳統原則",
- "classicPolicyDisableSuccessDescription": "已成功停用 '{0}'",
- "classicPolicyDisableSuccessTitle": "已停用傳統原則",
- "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync 支援的平台",
- "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync 不支援的平台",
- "classicPolicyExcludedPlatformsTitle": "排除的裝置平台",
- "classicPolicyFilterAll": "所有原則",
- "classicPolicyFilterDisabled": "已停用的原則",
- "classicPolicyFilterEnabled": "已啟用的原則",
- "classicPolicyIncludeExcludeMembersDescription": "您可以藉著排除群組,執行階段性的原則移轉。",
- "classicPolicyIncludeExcludeMembersTitle": "包含/排除群組",
- "classicPolicyIncludedPlatformsTitle": "包含的裝置平台",
- "classicPolicyManualMigrationMessage": "此原則必須手動移轉。",
- "classicPolicyMigrateCommand": "移轉",
- "classicPolicyMigrateConfirmation": "確定要移轉 '{0}' 嗎? 此原則只能移轉一次。",
- "classicPolicyMigrateFailDescription": "無法移轉 '{0}'",
- "classicPolicyMigrateFailTitle": "無法移轉傳統原則",
- "classicPolicyMigrateInProgressDescription": "正在移轉 '{0}'",
- "classicPolicyMigrateInProgressTitle": "正在移轉傳統原則",
- "classicPolicyMigrateRecommendText": "建議: 移轉到新的 Azure 入口網站原則。",
- "classicPolicyMigrateSuccessTitle": "已成功移轉傳統原則",
- "classicPolicyMigratedSuccessDescription": "現在可以在 [原則] 下管理這個傳統原則。",
- "classicPolicyMigratedSuccessDescriptionMultiple": "這個傳統原則已移轉為 {0} 個新原則。新原則可以在 [原則] 下進行管理。",
- "classicPolicyNoEditPermissionMsg": "您沒有編輯此原則的權限。只有全域管理員及安全性系統管理員可以編輯此原則。如需詳細資訊,請按一下這裡。",
- "classicPolicySaveFailDescription": "無法儲存 '{0}'",
- "classicPolicySaveFailTitle": "無法儲存傳統原則",
- "classicPolicySaveInProgressDescription": "正在儲存 '{0}'",
- "classicPolicySaveInProgressTitle": "正在儲存傳統原則",
- "classicPolicySaveSuccessDescription": "已成功儲存 '{0}'",
- "classicPolicySaveSuccessTitle": "已儲存傳統原則",
- "clientAppBladeLegacyInfoBanner": "目前不支援舊版驗證",
- "clientAppBladeLegacyUpsellBanner": "封鎖不支援的用戶端應用程式 (預覽)",
- "clientAppBladeTitle": "用戶端應用程式",
- "clientAppDescription": "選取將套用此原則的用戶端應用程式",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync 目前不支援所有其他條件",
- "clientAppLearnMore": "控制使用者對未使用新式驗證之特定用戶端應用程式的存取。",
- "clientAppLegacyHeader": "舊版驗證用戶端",
- "clientAppMobileDesktop": "行動裝置 App 及桌面用戶端",
- "clientAppModernHeader": "新式驗證用戶端",
- "clientAppOnlySupportedPlatforms": "僅將原則套用至支援的平台",
- "clientAppSelectSpecificClientApps": "選取用戶端應用程式",
- "clientAppWebBrowser": "瀏覽器",
- "clientAppsSelectedLabel": "已包含 {0} 個",
- "clientTypeBrowser": "瀏覽器",
- "clientTypeEas": "Exchange ActiveSync 用戶端",
- "clientTypeEasInfo": "Exchange ActiveSync 用戶端 (只使用舊版驗證)。",
- "clientTypeModernAuth": "新式驗證用戶端",
- "clientTypeOtherClients": "其他用戶端",
- "clientTypeOtherClientsInfo": "這包括舊版 Office 用戶端及其他郵件通訊協定 (POP、IMAP、SMTP 等)。[深入了解][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "此原則中設定的 {0} 個雲端應用程式已從目錄中刪除,但這不會影響原則中的其他應用程式。當您下次更新原則的應用程式區段時,刪除的應用程式就會自動從中移除。",
- "cloudAppsSelectionBladeAllMicrosoftApps": "所有 Microsoft 應用程式",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "允許 Microsoft 雲端、桌面和行動應用程式 (預覽)",
- "cloudappsSelectionBladeAllCloudapps": "所有雲端應用程式",
- "cloudappsSelectionBladeExcludeDescription": "選取要從原則豁免的雲端應用程式",
- "cloudappsSelectionBladeExcludedSelectorTitle": "選取排除的雲端應用程式",
- "cloudappsSelectionBladeIncludeDescription": "選取將套用這項原則的雲端應用程式",
- "cloudappsSelectionBladeIncludedSelectorTitle": "選取",
- "cloudappsSelectionBladeSelectedCloudapps": "選取應用程式",
- "cloudappsSelectorInfoBallonText": "使用者要加以存取以執行作業的服務。例如 'Salesforce'",
- "cloudappsSelectorPluralExcluded": "已排除 {0} 個應用程式",
- "cloudappsSelectorPluralIncluded": "已包含 {0} 個應用程式",
- "cloudappsSelectorSingularExcluded": "已排除 1 個應用程式",
- "cloudappsSelectorSingularIncluded": "已包含 1 個應用程式",
- "cloudappsSelectorUserPlural": "{0} 個應用程式",
- "cloudappsSelectorUserSingular": "1 個應用程式",
- "conditionLabelMulti": "已選取 {0} 個條件",
- "conditionLabelOne": "已選取 1 個條件",
- "conditionalAccessBladeTitle": "條件式存取",
- "conditionsNotSelectedLabel": "未設定",
- "conditionsReqMfaReauthSet": "某些選項無法使用,因為目前正在選取 [需要多重要素驗證] 授與及 [每次登入頻率] 工作階段控制",
- "conditionsReqPwSet": "因為目前已選取 [需要密碼變更],所以有些選項無法使用",
- "configureCasText": "設定 Cloud App Security",
- "configureCustomControlsText": "設定自訂原則",
- "controlLabelMulti": "已選取 {0} 個控制項",
- "controlLabelOne": "已選取 1 個控制項",
- "controlValidatorText": "請選取至少一個控制項",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "深入了解相容裝置的要求。",
- "controlsDeviceComplianceInfoBubble": "裝置必須符合 Intune 規範。如果裝置不符合規範,則會提示使用者使裝置符合規範。",
- "controlsDomainJoinedAriaLabel": "深入了解已使用 Microsoft Entra 混合式而聯結的裝置之要求。",
- "controlsDomainJoinedInfoBubble": "裝置必須是已使用 Microsoft Entra 混合式而聯結的。",
- "controlsMamAriaLabel": "深入了解核准用戶端應用程式的要求。",
- "controlsMamInfoBubble": "裝置必須使用這些經過核准的用戶端應用程式。",
- "controlsMfaInfoBubble": "使用者必須完成通話和簡訊等其他安全性需求",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "深入了解受原則保護的應用程式的要求。",
- "controlsRequireCompliantAppInfoBubble": "裝置必須使用受原則保護的應用程式。",
- "controlsRequirePasswordResetAriaLabel": "深入了解變更密碼的要求。",
- "controlsRequirePasswordResetInfoBubble": "需要變更密碼才可降低使用者風險。此選項也需要多重要素驗證。無法使用其他控制項。",
- "countriesRadiobuttonInfoBalloonContent": "登入所來自的國家/地區取決於使用者 IP 位址。",
- "createNewVpnCert": "新憑證",
- "createdTimeLabel": "建立時間",
- "customRoleLabel": "自訂角色 (不支援)",
- "dateRangeTypeLabel": "日期範圍",
- "daysOfWeekPlaceholderText": "篩選星期幾",
- "daysOfWeekTypeLabel": "星期幾",
- "deletePolicyNoLicenseText": "您可立即刪除此原則。刪除後,在您擁有必要授權前,都無法重新建立該原則。",
- "descriptionContentForControlsAndOr": "針對多個控制項",
- "devicePlatform": "裝置平台",
- "devicePlatformConditionHelpDescription": "將原則套用至選取的裝置平台。\n[深入了解][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "已包含 {0} 個",
- "devicePlatformIncludeExclude": "已排除 {0} 與 {1}",
- "devicePlatformNoSelectionError": "選取裝置平台必須選取一個子項目。",
- "devicePlatformsNone": "無",
- "deviceSelectionBladeExcludeDescription": "選取要從原則豁免的平台",
- "deviceSelectionBladeIncludeDescription": "選取要包含在這項原則的雲端應用程式",
- "deviceStateAll": "所有裝置狀態",
- "deviceStateCompliant": "標示為符合規範的裝置",
- "deviceStateCompliantInfoContent": "此原則的評估會排除符合 Intune 規範的裝置,因此,假如原則封鎖了存取權,系統即會封鎖所有裝置,但符合 Intune 規範的裝置除外。",
- "deviceStateConditionConfigureInfoContent": "依裝置狀態設定原則",
- "deviceStateConditionSelectorInfoContent": "使用者用來登入的裝置是否為「已使用 Microsoft Entra 混合式而聯結的」或「標示為合規」。\n 這已被淘汰。請改用 '{1}'。",
- "deviceStateConditionSelectorLabel": "裝置狀態 (已棄用)",
- "deviceStateDomainJoined": "已使用 Microsoft Entra 混合式而聯結的裝置",
- "deviceStateDomainJoinedInfoContent": "此原則的評估會排除已使用 Microsoft Entra 混合式而聯結的裝置,因此,如果原則會封鎖存取,即會封鎖所有裝置,但已使用 Microsoft Entra 混合式而聯結的裝置除外。",
- "deviceStateDomainJoinedInfoLinkText": "深入了解。",
- "deviceStateExcludeDescription": "選取用以將裝置排除在原則之外的裝置狀態。",
- "deviceStateIncludeAndExcludeOneLabel": "{0} 及排除 {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} 及排除 {1} 與 {2}",
- "directoryRoleInfoContent": "對內建目錄角色指派原則。",
- "directoryRolesLabel": "目錄角色",
- "discardbutton": "捨棄",
- "downloadDefaultFileName": "IP 範圍",
- "downloadExampleFileName": "範例",
- "downloadExampleHeader": "此範例檔案內含可接受之資料種類的示範。將略過以 # 開始的行。",
- "duplicate": "重複項",
- "duplicatePolicyName": "{0} 複本",
- "endDatePickerLabel": "末端",
- "endTimePickerLabel": "結束時間",
- "enterCountryText": "IP 位址與國家/地區會成對評估。請選取國家/地區。",
- "enterIpText": "IP 位址與國家/地區要成對評估。請輸入 IP 位址。",
- "enterUserText": "未選取任何使用者。請選取一名使用者。",
- "evaluationResult": "評估結果",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync 僅搭配受支援的平台",
- "excludeAllTrustedLocationSelectorText": "所有信任位置",
- "featureRequiresP2": "此功能需要 Microsoft Entra ID P2 授權。",
- "friday": "星期五",
- "grantControls": "授與控制權",
- "gridNetworkTrusted": "信任",
- "gridPolicyCreatedDateTime": "建立日期",
- "gridPolicyEnabled": "已啟用",
- "gridPolicyModifiedDateTime": "修改日期",
- "gridPolicyName": "原則名稱",
- "gridPolicyState": "狀態",
- "groupSelectionBladeExcludeDescription": "選取要從原則豁免的群組",
- "groupSelectionBladeExcludedSelectorTitle": "選取排除的群組",
- "groupSelectionBladeSelect": "選取群組",
- "groupSelectorInfoBallonText": "所處目錄已套用原則的群組。例如「試驗群組」",
- "groupsSelectionBladeTitle": "群組",
- "helpCommonScenariosText": "對常見案例感興趣嗎?",
- "helpCondition1": "當任何使用者於公司網路外時",
- "helpCondition2": "當「經理」群組的使用者登入時",
- "helpConditionsTitle": "條件",
- "helpControl1": "他們必須使用多重要素驗證登入",
- "helpControl2": "需要他們使用與 Intune 相容或已加入網域的裝置上",
- "helpControlsTitle": "控制項",
- "helpIntroText": "條件式存取可供您在發生特定狀況時,強制執行存取需求。讓我們看看一些範例",
- "helpIntroTitle": "什麼是條件式存取?",
- "helpLearnMoreText": "想要深入了解條件式存取嗎?",
- "helpStartStep1": "按一下 [+ 新增原則] 即可建立第一項原則",
- "helpStartStep2": "指定原則條件與控制項",
- "helpStartStep3": "完成之後,別忘了要啟用原則並建立",
- "helpStartTitle": "開始使用",
- "highRisk": "高",
- "includeAndExcludeAppsTextFormat": "包含: {0}。排除: {1}。",
- "includeAppsTextFormat": "包含: {0}。",
- "includeUnknownAreasCheckboxInfoBalloonContent": "未知區域是無法對應至國家/地區的 IP 位址。",
- "includeUnknownAreasCheckboxLabel": "包含未知區域",
- "infoCommandLabel": "資訊",
- "invalidCertDuration": "憑證期限無效",
- "invalidIpAddress": "值必須是有效的 IP 位址",
- "invalidReAuthSignInRiskOptionSelected": "[每次登入頻率] 工作階段控制項不允許在 [登入風險] 條件控制項中選取 [無風險]。",
- "invalidUriErrorMsg": "請輸入有效的 URI。例如 'uri:contoso.com:acr'",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "載入所有",
- "loading": "載入中...",
- "locationConfigureNamedLocationsText": "設定所有信任的位置",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "位置名稱過長。上限為 256 個字元",
- "locationSelectionBladeExcludeDescription": "選取要從原則豁免的位置",
- "locationSelectionBladeIncludeDescription": "選取要包含在此原則中的位置",
- "locationsAllLocationsLabel": "任何位置",
- "locationsAllNamedLocationsLabel": "所有信任的 IP",
- "locationsAllPrivateLinksLabel": "我租用戶中的所有私人連結",
- "locationsIncludeExcludeLabel": "{0} 並排除所有信任的 IP",
- "locationsSelectedPrivateLinksLabel": "選取的私人連結",
- "lowRisk": "低",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "若要管理條件式存取原則,您的組織需要 Microsoft Entra ID P1 或 P2。",
- "manageSecurityDefaultsAriaLabel": "管理安全性預設值設定。",
- "markAsTrustedCheckboxInfoBalloonContent": "從信任位置登入可降低使用者登入風險。只有在您知道輸入的 IP 範圍已在組織中建立且可靠時,才會將此位置標示為信任。",
- "markAsTrustedCheckboxLabel": "標示為信任位置",
- "mediumRisk": "中",
- "memberSelectionCommandRemove": "移除",
- "menuItemClaimProviderControls": "自訂控制項 (預覽)",
- "menuItemClassicPolicies": "傳統原則",
- "menuItemInsightsAndReporting": "深入解析與報告",
- "menuItemManage": "管理",
- "menuItemNamedLocationsPreview": "具名位置 (預覽)",
- "menuItemNamedNetworks": "具名位置",
- "menuItemPolicies": "原則",
- "menuItemTermsOfUse": "使用規定",
- "modifiedTimeLabel": "修改時間",
- "monday": "星期一",
- "nameLabel": "名稱",
- "namedLocationCountryInfoBanner": "只有 IPv4 位址對應到國家/地區。IPv6 位址包含在未知的國家/地區中。",
- "namedLocationTypeCountry": "國家/地區",
- "namedLocationTypeLabel": "定義位置的方式:",
- "namedLocationUpsellBanner": "此檢視已被取代。前往改良的新「具名位置」檢視。",
- "namedLocationsHelpDescription": "具名位置會由 Microsoft Entra ID 安全性報告用來減少誤判和 Microsoft Entra 條件式存取原則。\n[深入了解][1]\n[1]: https://aka.ms/namedlocationupdate (部分機器翻譯)",
- "namedNetworkAddIpRanges": "新增 IP 範圍 (例如: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "您至少需要選取一個國家/地區",
- "namedNetworkDeleteCommand": "刪除",
- "namedNetworkDeleteDescription": "確定要刪除 '{0}' 嗎? 此動作無法復原。",
- "namedNetworkDeleteTitle": "您確定嗎?",
- "namedNetworkDownloadIpRange": "下載",
- "namedNetworkInvalidRange": "值必須是有效的 IP 範圍。",
- "namedNetworkIpRangeNeeded": "您需要至少一個有效的 IP 範圍",
- "namedNetworkIpRangesDescriptionContent": "設定您組織的 IP 範圍",
- "namedNetworkIpRangesTab": "IP 範圍",
- "namedNetworkListAdd": "新增位置",
- "namedNetworkListConfigureTrustedIps": "設定多重要素驗證受信任的 IP",
- "namedNetworkNameDescription": "例如: 'Redmond office'",
- "namedNetworkNameInvalid": "提供的名稱無效。",
- "namedNetworkNameRequired": "您必須替此位置提供名稱。",
- "namedNetworkNoIpRanges": "沒有 IP 範圍",
- "namedNetworkNotificationCreateDescription": "正在建立命為 '{0}' 的位置",
- "namedNetworkNotificationCreateFailedDescription": "建立位置 '{0}' 失敗。請稍後再試一次。",
- "namedNetworkNotificationCreateFailedTitle": "無法建立位置",
- "namedNetworkNotificationCreateSuccessDescription": "已建立名為 '{0}' 的位置",
- "namedNetworkNotificationCreateSuccessTitle": "已建立 '{0}'",
- "namedNetworkNotificationCreateTitle": "正在建立 '{0}'",
- "namedNetworkNotificationDeleteDescription": "正在刪除命為 '{0}' 的位置",
- "namedNetworkNotificationDeleteFailedDescription": "刪除位置 '{0}' 失敗。請稍後再試一次。",
- "namedNetworkNotificationDeleteFailedTitle": "無法刪除位置",
- "namedNetworkNotificationDeleteSuccessDescription": "已刪除名為 '{0}' 的位置",
- "namedNetworkNotificationDeleteSuccessTitle": "已刪除 '{0}'",
- "namedNetworkNotificationDeleteTitle": "正在刪除 '{0}'",
- "namedNetworkNotificationUpdateDescription": "正在更新命為 '{0}' 的位置",
- "namedNetworkNotificationUpdateFailedDescription": "更新位置 '{0}' 失敗。請稍後再試一次。",
- "namedNetworkNotificationUpdateFailedTitle": "無法更新位置",
- "namedNetworkNotificationUpdateSuccessDescription": "已更新命為 '{0}' 的位置",
- "namedNetworkNotificationUpdateSuccessTitle": "已更新 '{0}'",
- "namedNetworkNotificationUpdateTitle": "正在更新 '{0}'",
- "namedNetworkSearchPlaceholder": "搜尋位置。",
- "namedNetworkUploadFailedDescription": "剖析提供的檔案時,發生錯誤。請務必上傳純文字檔,且每行都要是 CIDR 的格式。",
- "namedNetworkUploadFailedTitle": "無法剖析 '{0}'",
- "namedNetworkUploadInProgressDescription": "正在嘗試從 '{0}' 剖析有效的 CIDR 值。",
- "namedNetworkUploadInProgressTitle": "正在剖析 '{0}'",
- "namedNetworkUploadInvalidDescription": "'{0}' 可能太大或格式不正確。",
- "namedNetworkUploadInvalidTitle": "'{0}' 無效",
- "namedNetworkUploadIpRange": "上傳",
- "namedNetworkUploadSuccessDescription": "已分析 {0} 行。出現 {1} 個格式錯誤。已跳過 {2} 個。",
- "namedNetworkUploadSuccessTitle": "正在完成剖析 '{0}'",
- "namedNetworksAdd": "新增具名位置",
- "namedNetworksConditionHelpDescription": "根據其實際位置控制使用者存取。\n[深入了解][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "已排除 {0} 與 {1}",
- "namedNetworksHelpDescription": "具名位置會由 Microsoft Entra ID 安全性報告用來減少誤判和 Microsoft Entra 條件式存取原則。\n[深入了解][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "已包含 {0} 個",
- "namedNetworksNone": "找不到任何具名位置。",
- "namedNetworksTitle": "設定位置",
- "namednetworkExceedingSizeErrorBladeTitle": "錯誤詳細資料",
- "namednetworkExceedingSizeErrorDetailText": "如需詳細資料,請按一下這裡。",
- "namednetworkExceedingSizeErrorMessage": "超出具名位置所允許的儲存體上限。請使用較短的清單再試一次。若要檢視詳細資料,請按一下這裡。",
- "needMfaSecondary": "選取 [僅限次要驗證方法] 的 [每次登入頻率] 時,必須選取 [需要多重要素驗證]",
- "needMfaSpecificApps": "選取特定支援的應用程式時,[每次登入頻率] 工作階段控制項需要 [需要多重要素驗證] 授權控制",
- "newCertName": "新憑證",
- "noAttributePermissionsError": "權限不足,無法建立或更新原則。需要屬性定義讀取器角色才能新增/編輯動態篩選。",
- "noPolicyRowMessage": "無任何原則",
- "noSPSelected": "未選取任何服務主體",
- "noUpdatePermissionMessage": "您無權更新這些設定。請連絡您的全域管理員以取得存取權。",
- "noUserSelected": "未選取任何使用者",
- "noneRisk": "無風險",
- "office365Description": "這些應用程式包含 Microsoft Flow、Microsoft Forms、Microsoft Teams、Office 365 Exchange Online、Office 365 SharePoint Online、Office 365 Yammer 等項目。",
- "office365InfoBox": "選取的應用程式至少有一個屬於 Office 365。建議您改為設定 Office 365 應用程式上的原則。",
- "oneUserSelected": "已選取 1 位使用者",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "只有全域管理員能夠儲存此原則。",
- "or": "{0} 或 {1}",
- "pickerDoneCommand": "完成",
- "policiesBladeAdPremiumUpsellBannerText": "使用 Microsoft Entra ID 進階版建立您自己的原則並鎖定特定條件,例如雲端應用程式、登入風險及裝置平台。",
- "policiesBladeTitle": "原則",
- "policiesBladeTitleWithAppName": "原則: {0}",
- "policiesDisabledBannerText": "不允許為具有連結登入屬性的應用程式建立及編輯原則。",
- "policiesHitMaxLimitStatusBarMessage": "您已達到此租用戶的原則數上限。請先刪除部分原則再新增。",
- "policyAssignmentsSection": "工作分派",
- "policyBlockAllInfoBox": "設定的原則會封鎖所有使用者,所以不受支援。請檢閱指派與控制項。如果您想儲存此原則,請排除目前的使用者 {0}。",
- "policyCloudAppsDisplayTextAllApp": "所有 App",
- "policyCloudAppsLabel": "雲端應用程式",
- "policyConditionClientAppDescription": "使用者正在用來存取雲端應用程式的軟體。例如「瀏覽器」",
- "policyConditionClientAppV2Description": "使用者正在用來存取雲端應用程式的軟體。例如「瀏覽器」",
- "policyConditionDevicePlatform": "裝置平台",
- "policyConditionDevicePlatformDescription": "使用者的登入來源平台。例如 'iOS'",
- "policyConditionLocation": "位置",
- "policyConditionLocationDescription": "使用者的登入來源位置 (使用 IP 位址範圍判定)",
- "policyConditionLocationPreview": "位置 (預覽)",
- "policyConditionSigninRisk": "登入風險",
- "policyConditionSigninRiskDescription": "登入者為其他人而非使用者的可能性。風險等級可能是高、中或低。需要 Microsoft Entra ID P2 授權。",
- "policyConditionUserRisk": "使用者風險",
- "policyConditionUserRiskDescription": "設定實施原則所需的使用者風險層級",
- "policyConditioniClientApp": "用戶端應用程式",
- "policyControlAllowAccessDisplayedName": "授與存取權",
- "policyControlAuthenticationStrengthDisplayedName": "需要驗證強度 (預覽)",
- "policyControlBladeTitle": "授與",
- "policyControlBlockAccessDisplayedName": "封鎖存取",
- "policyControlCompliantDeviceDisplayedName": "裝置需要標記為合規",
- "policyControlContentDescription": "控制存取強制執行以封鎖或授與存取權。",
- "policyControlInfoBallonText": "封鎖存取,或選取如需允許存取所需滿足的其他需求",
- "policyControlMfaChallengeDisplayedName": "需要多重要素驗證",
- "policyControlRequireCompliantAppDisplayedName": "需要應用程式保護原則",
- "policyControlRequireDomainJoinedDisplayedName": "需要是已使用 Microsoft Entra 混合式而聯結的",
- "policyControlRequireMamDisplayedName": "需要經過核准的用戶端應用程式",
- "policyControlRequiredPasswordChangeDisplayedName": "需要變更密碼",
- "policyControlSelectAuthStrength": "需要驗證強度",
- "policyControlsNoControlsSelected": "已選取 0 個控制項",
- "policyControlsSection": "存取控制",
- "policyCreatBladeTitle": "新增",
- "policyCreateButton": "建立",
- "policyCreateFailedMessage": "錯誤: {0}",
- "policyCreateFailedTitle": "無法建立 '{0}'",
- "policyCreateInProgressTitle": "正在建立 '{0}'",
- "policyCreateSuccessMessage": "已成功建立 '{0}'。若您將 [啟用原則] 設為 [開啟],原則會在幾分鐘後啟用。",
- "policyCreateSuccessTitle": "已成功建立 '{0}'",
- "policyDeleteConfirmation": "確定要刪除 '{0}' 嗎? 此動作無法復原。",
- "policyDeleteFailTitle": "無法刪除 '{0}'",
- "policyDeleteInProgressTitle": "正在刪除 '{0}'",
- "policyDeleteSuccessTitle": "已成功刪除 '{0}'",
- "policyEnforceLabel": "啟用原則",
- "policyErrorCannotSetSigninRisk": "您無權使用登入風險狀況儲存原則。",
- "policyErrorNoPermission": "您無權儲存原則。請連絡您的全域管理員。",
- "policyErrorUnknown": "發生錯誤,請稍後再試一次。",
- "policyFallbackWarningMessage": "無法使用 MS Graph 建立或更新 '{0}',導致 AD Graph 的後援。請調查下列案例,因為在使用不相容的條件呼叫 MS Graph 原則端點時,最可能發生 Bug。",
- "policyFallbackWarningTitle": "已部分成功建立或更新 '{0}'",
- "policyNameCannotBeEmpty": "原則名稱不可為空白",
- "policyNameDevice": "裝置原則",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "行動裝置應用程式管理原則",
- "policyNameMfaLocation": "多重要素驗證和位置原則",
- "policyNamePlaceholderText": "範例:「裝置合規性應用程式原則」",
- "policyNameTooLongError": "原則名稱過長。上限為 256 個字元",
- "policyOff": "關閉",
- "policyOn": "開啟",
- "policyReportOnly": "僅限報表",
- "policyReviewSection": "檢閱",
- "policySaveButton": "儲存",
- "policyStatusIconDescription": "已啟用原則",
- "policyStatusIconEnabled": "己啟用狀態圖示",
- "policyTemplateName1": "為 {0} 瀏覽器存取使用應用程式強制的限制",
- "policyTemplateName2": "受控的裝置上只允許 {0} 存取",
- "policyTemplateName3": "從 [持續性存取評估] 設定中移轉的原則",
- "policyTriggerRiskSpecific": "選取指定的風險等級",
- "policyTriggersInfoBalloonText": "定義原則套用時機的條件。例如「位置」",
- "policyTriggersNoConditionsSelected": "已選取 0 個條件",
- "policyTriggersSelectorLabel": "條件",
- "policyUpdateFailedMessage": "錯誤: {0}",
- "policyUpdateFailedTitle": "無法更新 {0}",
- "policyUpdateInProgressTitle": "正在更新 {0}",
- "policyUpdateSuccessMessage": "已成功更新 {0}。若您將 [啟用原則] 設為 [開啟],原則會在幾分鐘後啟用。",
- "policyUpdateSuccessTitle": "已成功更新 {0}",
- "primaryCol": "主要",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "報告專用模式: 原則會在登入時經過評估及記錄,但不會影響使用者。",
- "requireAllControlsText": "需要所有選取的控制項",
- "requireCompliantDevice": "需要符合規範裝置",
- "requireDomainJoined": "需要已加入網域的裝置",
- "requireGrantReauth": "選取 [所有雲端應用程式] 時,[每次登入頻率] 工作階段控制項需要 [需要多重要素驗證] 或 [需要變更密碼] 以授與控制權",
- "requireMFA": "需要多重要素驗證",
- "requireMfaReauth": "[每次登入頻率] 工作階段控制項需要 [需要多重要素驗證],以授與 [登入風險] 的控制權",
- "requireOneControlText": "需要其中一個選取的控制項",
- "requirePasswordChangeReauth": "「每次登入頻率」工作階段控制項需要「需要變更密碼」授權控制「使用者風險」",
- "requireRiskReauth": "選取 「所有雲端應用程式」時,「每次的登入頻率」工作階段控制項需要「使用者風險」或「登入風險」工作階段控制。",
- "requireRiskReauthRiskNotEnabled": "選取「所有雲端應用程式」時,無法使用「每次的登入頻率」工作階段控制項。",
- "requireRiskReauthSignInOnly": "選取「所有雲端應用程式」時,「每次的登入頻率」工作階段控制項需要「登入風險」工作階段控制項。",
- "requireRiskReauthUserOnly": "選取「所有雲端應用程式」時,「每次的登入頻率」工作階段控制項需要「使用者風險」工作階段控制項。",
- "resetFilters": "重設篩選",
- "sPRequired": "需要服務主體",
- "sPSelectorInfoBalloon": "您要測試的使用者或服務主體",
- "saturday": "星期六",
- "searchTextTooLongError": "搜尋文字太長。最多 256 個字元",
- "securityDefaultsPolicyName": "安全性預設值",
- "securityDefaultsTextMessage": "必須停用安全性預設值,才可啟用條件式存取原則。",
- "securityDefaultsUpdateInProgressText": "正在進行安全性預設值更新,請稍候,然後再試一次。",
- "securityDefaultsWarningMessage": "您似乎想要管理您組織的安全性設定。真棒! 您必須先{0}停用安全性預設值{1},才能啟用條件式存取原則。",
- "selectDevicePlatforms": "選取裝置平台",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "選取位置",
- "selectedSP": "選取的服務主體",
- "servicePrincipalBladeExcludedSelectorTitle": "選取排除的服務主體",
- "servicePrincipalBladeIncludedSelectorTitle": "選取服務主體",
- "servicePrincipalDataGridAria": "可用服務主體的清單",
- "servicePrincipalDropDownLabel": "此原則適用於哪些方面?",
- "servicePrincipalInfoBox": "因為原則指派中的 '{0}' 選取範圍,導致某些條件無法使用",
- "servicePrincipalRadioAll": "所有擁有的服務主體",
- "servicePrincipalRadioSelect": "選取服務主體",
- "servicePrincipalSelectionsAria": "選取的服務主體格線",
- "servicePrincipalSelectorAria": "所選服務主體的清單",
- "servicePrincipalSelectorMultiple": "已選取 {0} 個服務主體",
- "servicePrincipalSelectorSingle": "已選取 1 個服務主體",
- "servicePrincipalSpecificExc": "已排除特定的服務主體",
- "servicePrincipalSpecificInc": "包含特定的服務主體",
- "servicePrincipals": "服務主體",
- "sessionControlBladeTitle": "工作階段",
- "sessionControlDescriptionContent": "根據工作階段控制項控制存取,以啟用特定雲端應用程式中的有限體驗。",
- "sessionControlDisableInfo": "此控制項只適用於支援的應用程式。目前僅 Office 365、Exchange Online 和 SharePoint Online 等雲端應用程式支援應用程式強制執行的限制。按一下這裡以深入了解。",
- "sessionControlInfoBallonText": "工作階段控制項讓雲端應用程式內的體驗受限。",
- "sessionControls": "工作階段控制項",
- "sessionControlsAppEnforcedLabel": "使用應用程式強制執行限制",
- "sessionControlsCasLabel": "使用條件式存取應用程式控制",
- "sessionControlsSecureSignInLabel": "需要權杖繫結",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "已包含 {0} 個",
- "signinRiskReauth": "選取 [需要多重要素驗證] 授與 [每次登入頻率] 工作階段控制時,必須選取 [登入風險] 條件",
- "signinRiskTriggerDescriptionContent": "選取登入風險等級",
- "singleTenantServicePrincipalInfoBallonText": "原則僅適用於貴組織所擁有的單一租用戶服務主體。按一下這裡以深入了解",
- "specificSigninRiskLevelsOption": "選取特定登入風險等級",
- "specificUsersExcluded": "排除的特定使用者",
- "specificUsersIncluded": "包含的特定使用者",
- "specificUsersIncludedAndExcluded": "排除及包含特定的使用者",
- "startDatePickerLabel": "開始",
- "startFreeTrial": "開始免費試用",
- "startTimePickerLabel": "開始時間",
- "sunday": "星期日",
- "testButton": "What If",
- "thumbprintCol": "指紋",
- "thursday": "星期四",
- "timeConditionAllTimesLabel": "任何時間",
- "timeConditionIntroText": "設定將套用此原則的時間",
- "timeConditionSelectorInfoBallonContent": "使用者登入時間。例如,\"Wednesday 9am-5pm PST\"",
- "timeConditionSelectorLabel": "時間 (預覽)",
- "timeConditionSpecificLabel": "特定時間",
- "timeSelectorAllTimesText": "任何時間",
- "timeSelectorSpecificTimesText": "已設定特定時間",
- "timeZoneDropdownInfoBalloonContent": "選取可定義時間範圍的時區。此原則適用於所有時區中的使用者。例如,對某位使用者是 'Wednesday 9am - 5pm',對不同時區的使用者則是 'Wednesday 10am - 6pm'。",
- "timeZoneDropdownLabel": "時區",
- "timeZoneDropdownPlaceholderText": "選取時區",
- "tooManyPoliciesDescription": "目前僅顯示前 50 個原則,請按一下這裡檢視所有原則",
- "tooManyPoliciesTitle": "找到 50 個以上的原則",
- "trustedLocationStatusIconDescription": "位置受信任",
- "trustedLocationStatusIconEnabled": "信任的狀態圖示",
- "tuesday": "星期二",
- "uploadInBadState": "無法上傳指定的檔案。",
- "upsellAppsDescription": "敏感性應用程式隨時都需要多重要素驗證,或僅在來自公司網路外部時需要。",
- "upsellAppsTitle": "保護應用程式",
- "upsellBannerText": "取得免費 Premium 試用版即可使用此功能",
- "upsellDataDescription": "需要標記為符合規範或已使用 Microsoft Entra 混合式而聯結的裝置,才能允許存取公司資源。",
- "upsellDataTitle": "保護資料",
- "upsellDescription": "條件式存取可提供保護公司資料安全所需的控制及保護,同時可讓您的員工透過任一種裝置交出最好的工作表現。例如,您可以限制來自公司網路外部的存取,或僅限對符合合規性原則的裝置進行存取。",
- "upsellRiskDescription": "Microsoft 的機器學習系統所偵測到的風險事件需要多重要素驗證。",
- "upsellRiskTitle": "保護免於風險的威脅",
- "upsellTitle": "條件式存取",
- "upsellWhyTitle": "為什麼要使用條件式存取?",
- "userAppNoneOption": "無",
- "userNamePlaceholderText": "輸入使用者名稱",
- "userNotSetSeletorLabel": "已選取 0 個使用者與群組",
- "userOnlySelectionBladeExcludeDescription": "選取要從原則免除的使用者",
- "userOrGroupSelectionCountDiffBannerText": "已將此原則中設定的 {0} 從目錄中刪除,但不會影響原則中的其他使用者與群組。當您下次更新此原則時,刪除的使用者及 (或) 群組將自動移除。",
- "userOrSPNotSetSelectorLabel": "已選取 0 個使用者或工作負載身分識別",
- "userOrSPSelectionBladeTitle": "使用者或工作負載身分識別",
- "userOrSPSelectorInfoBallonText": "原則套用目錄中的身分標識,包括使用者、群組和服務主體",
- "userRequired": "需要使用者",
- "userRiskErrorBox": "選取 [需要密碼變更] 授與時,必須選取 [使用者風險] 條件",
- "userRiskReauth": "選取 [需要變更密碼] 授與 [每次登入頻率] 工作階段控制時,必須選取 [使用者風險] 條件而非 [登入風險]",
- "userSPRequired": "需要使用者或服務主體",
- "userSPSelectorTitle": "使用者或工作負載身分識別",
- "userSelectionBladeAllUsersAndGroups": "所有使用者與群組",
- "userSelectionBladeExcludeDescription": "選取要從原則豁免的使用者與群組",
- "userSelectionBladeExcludeTabTitle": "排除",
- "userSelectionBladeExcludedSelectorTitle": "選取要排除的使用者與群組",
- "userSelectionBladeIncludeDescription": "選取此原則要套用的使用者",
- "userSelectionBladeIncludeTabTitle": "包括",
- "userSelectionBladeIncludedSelectorTitle": "選取",
- "userSelectionBladeSelectUsers": "選取使用者",
- "userSelectionBladeSelectedUsers": "選取使用者與群組",
- "userSelectionBladeTitle": "使用者和群組",
- "userSelectorBladeTitle": "使用者",
- "userSelectorExcluded": "已排除 {0} 個",
- "userSelectorGroupPlural": "{0} 個群組",
- "userSelectorGroupSingular": "1 個群組",
- "userSelectorIncluded": "已包含 {0} 個",
- "userSelectorInfoBallonText": "所處目錄已套用原則的使用者與群組。例如「試驗群組」",
- "userSelectorSelected": "已選取 {0} ",
- "userSelectorTitle": "使用者",
- "userSelectorUserAndGroup": "{0},{1}",
- "userSelectorUserPlural": "{0} 位使用者",
- "userSelectorUserSingular": "1 位使用者",
- "userSelectorWithExclusion": "{0} 和 {1}",
- "usersGroupsLabel": "使用者和群組",
- "viewApprovedAppsText": "請參閱經核准的用戶端應用程式清單",
- "viewCompliantAppsText": "請參閱受原則保護的用戶端應用程式清單",
- "viewPolicyInformation": "檢視原則資訊",
- "vpnBladeTitle": "VPN 連線能力",
- "vpnCertCreateFailedMessage": "錯誤: {0}",
- "vpnCertCreateFailedTitle": "無法建立 {0}",
- "vpnCertCreateInProgressTitle": "正在建立 {0}",
- "vpnCertCreateSuccessMessage": "已成功建立 {0}。",
- "vpnCertCreateSuccessTitle": "已成功建立 {0}",
- "vpnCertNoRowsMessage": "找不到任何 VPN 憑證",
- "vpnCertUpdateFailedMessage": "錯誤: {0}",
- "vpnCertUpdateFailedTitle": "無法更新 {0}",
- "vpnCertUpdateInProgressTitle": "正在更新 {0}",
- "vpnCertUpdateSuccessMessage": "已成功更新 {0}。",
- "vpnCertUpdateSuccessTitle": "已成功更新 {0}",
- "vpnFeatureInfo": "如需 VPN 連線能力與條件式存取的其他資訊,請按一下這裡。",
- "vpnFeatureWarning": "在入口網站建立 VPN 憑證之後,Microsoft Entra ID 就會立即開始利用其來對 VPN 用戶端核發短期憑證。立即將 VPN 憑證部署至 VPN 伺服器相當重要,可避免 VPN 用戶端的認證驗證發生任何問題。",
- "vpnMenuText": "VPN 連線能力",
- "vpncertDropdownDefaultOption": "持續時間",
- "vpncertDropdownInfoBalloonContent": "為您要建立的憑證選取期限",
- "vpncertDropdownLabel": "選取持續時間",
- "vpncertDropdownOneyearOption": "1 年",
- "vpncertDropdownThreeyearOption": "3 年",
- "vpncertDropdownTwoyearOption": "2 年",
- "wednesday": "星期三",
- "whatIfCountry": "國家/地區",
- "whatIfCountryInfo": "使用者進行登入的國家/地區。",
- "whatIfDevicePlatformInfo": "使用者登入時所使用的裝置平台。",
- "whatIfEnterIpAddress": "輸入 IP 位址 (例如: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "指定的 IP 位址無效。",
- "whatIfIpAddress": "IP 位址",
- "whatIfIpAddressInfo": "使用者登入時所使用的 IP 位址。",
- "whatIfIpCountryInfoBoxText": "若使用 IP 位址或國家/地區,則會需要兩個欄位,且應正確對應。",
- "whatIfSelectCountry": "選取國家/地區...",
- "whatIfSelectDevicePlatform": "選取裝置平台...",
- "whatIfSelectPrivateLink": "選取私人連結...",
- "whatIfSelectSignInRisk": "選取登入風險...",
- "whatIfSignInRisk": "登入風險",
- "whatIfSignInRiskInfo": "與登入相關的風險層級",
- "whatIfUnknownAreas": "不明區域",
- "windows365InfoBox": "選取 Windows 365 會影響與雲端電腦和 Azure 虛擬桌面工作階段主機的連接。按一下這裡以深入了解。",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "工作負載身分識別 (預覽)",
- "workloadIdentitiesLicenseText": "需要工作負載身分識別進階 P1 或 P2 授權,才能編輯此原則。",
- "workloadIdentity": "工作負載身分識別"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "不支援",
- "supportEnding": "支援結束",
- "supported": "受支援"
- }
- },
- "SecurityTemplate": {
- "aSR": "受攻擊面縮小",
- "accountProtection": "帳戶防護",
- "allDevices": "所有裝置",
- "antivirus": "防毒",
- "antivirusReporting": "防毒報告 (預覽)",
- "conditionalAccess": "條件存取",
- "deviceCompliance": "裝置相容性",
- "diskEncryption": "磁碟加密",
- "eDR": "端點偵測及回應",
- "ePM": "端點權限管理",
- "firewall": "防火牆",
- "helpSupport": "說明及支援",
- "setup": "安裝",
- "wdapt": "適用於端點的 Microsoft Defender"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "失敗",
- "hardReboot": "強制重新開機",
- "retry": "重試",
- "softReboot": "軟開機",
- "success": "成功"
- },
- "Columns": {
- "codeType": "程式碼類型",
- "returnCode": "傳回碼"
- },
- "bladeTitle": "傳回碼",
- "gridAriaLabel": "傳回碼",
- "header": "指定傳回碼以指出安裝後行為:",
- "onAddAnnounceMessage": "傳回新增了程式碼的第 {1} 個項目 (共 {0} 個項目)",
- "onDeleteSuccess": "傳回碼 {0} 刪除成功",
- "returnCodeAlreadyUsedValidation": "傳回碼已使用。",
- "returnCodeMustBeIntegerValidation": "傳回碼應為整數。",
- "returnCodeShouldBeAtLeast": "傳回碼至少應為 {0}。",
- "returnCodeShouldBeAtMost": "傳回碼最多應為 {0}。",
- "selectorLabel": "傳回碼"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "阿拉伯文",
- "bulgarian": "保加利亞文",
- "chineseSimplified": "簡體中文",
- "chineseTraditional": "繁體中文",
- "croatian": "克羅埃西亞文",
- "czech": "捷克文",
- "danish": "丹麥文",
- "dutch": "荷蘭文",
- "englishUK": "英文 (英國)",
- "englishUS": "英文 (美國)",
- "estonian": "愛沙尼亞文",
- "finnish": "芬蘭文",
- "frenchCanada": "法文 (加拿大)",
- "frenchFrance": "法文 (法國)",
- "german": "德文",
- "greek": "希臘文",
- "hebrew": "希伯來文",
- "hungarian": "匈牙利文",
- "italian": "義大利文",
- "japanese": "日文",
- "korean": "韓文",
- "latvian": "拉脫維亞文",
- "lithuanian": "立陶宛文",
- "norwegian": "巴克摩挪威文",
- "polish": "波蘭文",
- "portugueseBrazil": "葡萄牙文 (巴西)",
- "portuguesePortugal": "葡萄牙文 (葡萄牙)",
- "romanian": "羅馬尼亞文",
- "russian": "俄文",
- "serbian": "塞爾維亞文",
- "slovak": "斯洛伐克文",
- "slovenian": "斯洛維尼亞文",
- "spanishMexico": "西班牙文 (墨西哥)",
- "spanishSpain": "西班牙文 (西班牙)",
- "swedish": "瑞典文",
- "thai": "泰國",
- "turkish": "土耳其文",
- "ukrainian": "烏克蘭文"
- },
- "Summary": {
- "placeholder": "從左側選取通知訊息以預覽內容。"
- },
- "companyContact": "顯示連絡人資訊",
- "companyLogo": "顯示公司標誌",
- "companyName": "顯示公司名稱",
- "createEditDescription": "建立或編輯通知訊息範本。",
- "createMessage": "建立訊息",
- "deviceDetails": "顯示裝置詳細資料",
- "deviceDetailsInfoBox": "預設會關閉此設定,因為擷取裝置詳細資料可能會造成接收電子郵件通知的延遲。",
- "editImpactInfo": "編輯此通知訊息的範本,將會影響所有使用此範本的原則。",
- "editMessage": "編輯訊息",
- "email": "電子郵件",
- "emailFooterTitle": "電子郵件頁尾",
- "emailHeaderFooterInfo": "電子郵件通知的電子郵頁首和頁尾設定取決於端點管理員中租用戶系統管理節點內的自訂設定。",
- "emailHeaderTitle": "電子郵件標頭",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "設定自訂設定",
- "formSubTitle": "建立或修改通知電子郵件",
- "headerFooterSettingsTab": "標頭及頁尾設定",
- "imgPreview": "影像預覽",
- "infotext": "選取通知訊息。若要建立新的通知,請瀏覽 [設定裝置合規性] 工作負載中 [管理] 區段內的 [通知]。",
- "iwLink": "顯示公司入口網站連結",
- "listEmpty": "沒有任何郵件範本。",
- "listEmptySelectOnly": "沒有任何郵件範本。若要建立新的通知,請瀏覽 [設定裝置合規性] 工作負載中 [管理] 區段內的通知。",
- "listSubTitle": "通知郵件範本清單",
- "listTitle": "通知訊息範本",
- "localizedNotificationMessageTemplates": "當地語系化通知訊息範本",
- "messageAssigned": "因為一或多個合規性政策目前正在使用此訊息範本,所以無法刪除。",
- "messageCapitalized": "通知訊息範本",
- "messageLowercase": "通知訊息範本",
- "missingDefaultError": "選取預設範本",
- "notificationMessageTemplates": "通知訊息範本",
- "rowValidationError": "至少需要一個訊息範本",
- "selectDescription": "選取通知郵件。若要建立新的通知,請前往 [設定裝置合規性] 工作負載中 [管理] 區段的 [通知]。",
- "tenantValueText": "租用戶值",
- "testEmailLabel": "傳送預覽電子郵件",
- "localeLabel": "地區設定",
- "isDefaultLocale": "是預設"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "已施行重新開機前要等候的天數"
- },
"Description": {
- "label": "描述"
+ "label": "說明"
},
+ "FeatureDeploymentSettings": {
+ "header": "功能部署設定"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "此功能無法降級裝置。",
+ "label": "要部署的功能更新"
+ },
+ "GradualRolloutEndDate": {
+ "label": "最終群組可用性"
+ },
+ "GradualRolloutInterval": {
+ "label": "群組之間的天數"
+ },
+ "GradualRolloutStartDate": {
+ "label": "第一個群組可用性"
+ },
"Name": {
"label": "名稱"
},
- "QualityUpdateRelease": {
- "label": "當裝置 OS 版本低於以下版本時,加快品質更新的安裝:"
- },
- "bladeTitle": "Windows 10 和更新版本的品質更新 (預覽)",
- "loadError": "載入失敗!"
+ "OptionalUpdate": {
+ "label": "必要或選擇性更新"
+ },
+ "RolloutOptions": {
+ "label": "推出選項"
+ },
+ "RolloutSettings": {
+ "header": "您何時要讓更新在 Windows Update 中提供?"
+ },
+ "ScopeSettings": {
+ "header": "設定此原則的範圍標籤。"
+ },
+ "StartDateOnlyStartDate": {
+ "label": "第一個可用日期"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "已停用",
+ "enabled": "已啟用",
+ "infoBalloonContent": "控制是否要將最新的 Windows 10 功能更新安裝到不符合 Windows 11 資格的裝置",
+ "label": "當裝置不符合執行 Windows 11 的資格時,安裝最新的 Windows 10 功能更新",
+ "notApplicable": "不適用",
+ "summaryLabel": "在不符合執行 Windows 11 資格的裝置上安裝 Windows 10"
+ },
+ "bladeTitle": "功能更新部署",
+ "deploymentSettingsTitle": "部署設定",
+ "loadError": "載入失敗!",
+ "windows11EULA": "選取此 [功能更新] 進行部署即表示您將此作業系統套用至裝置時,同意 (1) 透過大量授權購買適用的 Windows 授權係,或 (2) 您已獲得授權可繫結您的組織,並代表您的組織接受列於此處的相關 Microsoft 軟體授權條款{0}。"
},
+ "Notifications": {
+ "deploymentSaved": "已儲存 \"{0}\"。",
+ "newFeatureUpdateDeploymentCreated": "已建立新的功能更新部署。"
+ },
"TabName": {
- "qualityUpdateSettings": "設定"
+ "deploymentSettings": "部署設定",
+ "groupAssignmentSettings": "指派",
+ "scopeSettings": "範圍標籤"
},
- "infoBoxText": "除了現有的 Windows 10 及更新版本的更新通道原則外,目前所提供專用品質更新控制項能夠為低於指定修補程式等級的裝置加快品質更新。日後將推出其他控制項。",
- "licenseLearnMoreText": "深入了解先決條件和品質更新原則。",
- "licenseWarningBoxText": "建立品質更新原則需要特定授權。",
- "warningBoxText": "雖然加速軟體更新有助於在必要時,縮短達成合規性的時間,但對於終端使用者的產能,將會有較大影響。終端使用者在上班時間內執行重新啟動的機會,可能會明顯增加。"
+ "gradualRolloutLicenseWarning": "此功能需要特定授權。",
+ "gradualRolloutLicenseWarningEdit": "在未選取此功能的情況下儲存原則之前,可以繼續使用並設定此功能。",
+ "licenseLearnMoreText": "深入了解先決條件和功能更新原則。",
+ "optionalUpdateWarning": "選擇性更新僅適用於 Windows 11",
+ "profileNameWarning": "名稱不應該超過 64 個字元",
+ "specificLicensingRequired": "某些選取的功能需要特定授權。"
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64 位元",
- "thirtyTwoBit": "32 位元"
- },
- "TACSettings": {
- "edgeSettings": "Edge 組態設定",
- "edgeWindowsDataProtectionSettings": "Edge (Windows) 資料保護設定 - 預覽",
- "edgeWindowsSettings": "Microsoft Edge (Windows) 設定 - 預覽",
- "generalAppConfig": "一般應用程式設定",
- "generalSettings": "一般組態設定",
- "outlookSMIMEConfig": "Outlook S/MIME 設定",
- "outlookSettings": "Outlook 組態設定",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "新增網路界限",
- "addNetworkBoundaryButton": "新增網路界限...",
- "allowWindowsSearch": "允許 Windows Search 搜尋已加密的公司資料與市集應用程式",
- "authoritativeIpRanges": "企業 IP 範圍清單具權威性 (不會自動偵測)",
- "authoritativeProxyServers": "企業 Proxy 伺服器清單具權威性 (不會自動偵測)",
- "boundaryType": "界限類型",
- "cloudResources": "雲端資源",
- "corporateIdentity": "公司身分識別",
- "dataRecoveryCert": "上傳資料修復代理 (DRA) 憑證以允許復原已加密的資料",
- "editNetworkBoundary": "編輯網路界限",
- "enrollmentState": "註冊狀態",
- "iPv4Ranges": "IPv4 範圍",
- "iPv6Ranges": "IPv6 範圍",
- "internalProxyServers": "內部 Proxy 伺服器",
- "maxInactivityTime": "在裝置閒置後允許的最大時間長度 (分鐘),之後裝置會以 PIN 或密碼鎖定",
- "maxPasswordAttempts": "允許的驗證失敗次數,之後會抹除裝置",
- "mdmDiscoveryUrl": "MDM 探索 URL",
- "mdmRequiredSettingsInfo": "此原則僅適用於 Windows 10 年度更新版及更高版本。此原則使用 Windows 資訊保護 (WIP) 來進行保護。",
- "minimumPinLength": "設定 PIN 所需的最小字元數",
- "name": "名稱",
- "networkBoundariesGridEmptyText": "所有新增的網路界限皆會顯示於此",
- "networkBoundary": "網路界限",
- "networkDomainNames": "網路網域",
- "neutralResources": "中性資源",
- "passportForWork": "使用 Windows Hello 企業版作為登入 Windows 的方法",
- "pinExpiration": "指定可以使用 PIN 的時間長度 (天),之後系統會要求使用者予以變更",
- "pinHistory": "指定可與使用者帳戶相關聯但不可重複使用先前用過的 PIN 數目",
- "pinLowercaseLetters": "設定 Windows Hello 企業版 PIN 中的小寫字母用法",
- "pinSpecialCharacters": "設定 Windows Hello 企業版 PIN 中的特殊字元用法",
- "pinUppercaseLetters": "設定 Windows Hello 企業版 PIN 中的大寫字母用法",
- "protectUnderLock": "防止 App 在裝置鎖定時存取公司資料。只適用於 Windows 10 行動裝置版",
- "protectedDomainNames": "受保護的網域",
- "proxyServers": "Proxy 伺服器",
- "requireAppPin": "當裝置 PIN 受管理時,停用應用程式 PIN",
- "requiredSettings": "必要設定",
- "requiredSettingsInfo": "變更範圍或移除此原則會將公司資料解密。",
- "revokeOnMdmHandoff": "在裝置註冊 MDM 時撤銷對受保護資料的存取權",
- "revokeOnUnenroll": "取消註冊時一併撤銷加密金鑰",
- "rmsTemplateForEdp": "指定要用於 Azure RMS 的範本識別碼",
- "showWipIcon": "顯示企業資料保護圖示",
- "type": "類型",
- "useRmsForWip": "將 Azure RMS 用於 WIP",
- "value": "值",
- "weRequiredSettingsInfo": "此原則僅適用於 Windows 10 Creators Update 及更高版本。此原則使用 Windows 資訊保護 (WIP) 與 Windows MAM 來進行保護。",
- "wipProtectionMode": "Windows 資訊保護模式",
- "withEnrollment": "有註冊",
- "withoutEnrollment": "沒有註冊"
+ "Platform": {
+ "all": "全部",
+ "android": "Android 裝置系統管理員",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android Enterprise",
+ "common": "通用",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS 與 Android",
+ "iosCommaAndroidPlatformLabel": "iOS、Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "未知",
+ "unsupported": "不支援",
+ "windows": "Windows",
+ "windows10": "Windows 10 及更新版本",
+ "windows10CM": "Windows 10 及更新版本 (ConfigMgr)",
+ "windows10Holo": "Windows 10 全像攝影版",
+ "windows10Mobile": "Windows 10 行動裝置版",
+ "windows10Team": "Windows 10 團隊版",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 及更新版本",
+ "windows8And10": "Windows 8 與 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 及更新版本",
+ "windows10AndWindowsServer": "Windows 10、Windows 11 與 Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 及更新版本 (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows 電腦"
+ },
+ "InstallIntent": {
+ "available": "適用於已註冊的裝置",
+ "availableWithoutEnrollment": "無論註冊與否均可使用",
+ "required": "必要",
+ "uninstall": "解除安裝"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "篩選",
+ "noFilters": "無"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "作者",
- "template": "範本名稱"
- },
- "Row": {
- "ariaLabel": "資料列 {0} (共 {1} 個) 資料行 {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "從頭開始,然後從可用的詳細目錄屬性程式庫選取您想要的屬性"
- },
- "SettingsCatalog": {
- "subtitle": "從頭開始,並從可用設定的程式庫中選取您想要的設定",
- "title": "設定目錄"
- },
- "Templates": {
- "subtitle": "範本中包含依功能分類的設定群組。當您不想手動建置原則,或想要設定裝置以存取企業網路 (例如設定 WiFi 或 VPN) 時,就適合使用範本。",
- "title": "範本"
- },
- "noData": "找不到任何原則範本"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop 用戶端",
- "visioProRetail": "Visio Online 方案 2"
- },
- "Countries": {
- "ae": "阿拉伯聯合大公國",
- "ag": "安地卡及巴布達",
- "ai": "安奎拉",
- "al": "阿爾巴尼亞",
- "am": "亞美尼亞",
- "ao": "安哥拉",
- "ar": "阿根廷",
- "at": "奧地利",
- "au": "澳洲",
- "az": "亞塞拜然",
- "bb": "巴貝多",
- "be": "比利時",
- "bf": "布吉納法索",
- "bg": "保加利亞",
- "bh": "巴林",
- "bj": "貝南",
- "bm": "百慕達",
- "bn": "汶萊",
- "bo": "玻利維亞",
- "br": "巴西",
- "bs": "巴哈馬",
- "bt": "不丹",
- "bw": "波札那",
- "by": "白俄羅斯",
- "bz": "貝里斯",
- "ca": "加拿大",
- "cg": "剛果共和國",
- "ch": "瑞士",
- "cl": "智利",
- "cn": "中國",
- "co": "哥倫比亞",
- "cr": "哥斯大黎加",
- "cv": "維德角",
- "cy": "賽普勒斯",
- "cz": "捷克共和國",
- "de": "德國",
- "dk": "丹麥",
- "dm": "多米尼克",
- "do": "多明尼加共和國",
- "dz": "阿爾及利亞",
- "ec": "厄瓜多",
- "ee": "愛沙尼亞",
- "eg": "埃及",
- "es": "西班牙",
- "fi": "芬蘭",
- "fj": "斐濟",
- "fm": "密克羅尼西亞聯邦",
- "fr": "法國",
- "gb": "英國",
- "gd": "格瑞那達",
- "gh": "迦納",
- "gm": "甘比亞",
- "gr": "希臘",
- "gt": "瓜地馬拉",
- "gw": "幾內亞比索",
- "gy": "蓋亞那",
- "hk": "香港",
- "hn": "宏都拉斯",
- "hr": "克羅埃西亞",
- "hu": "匈牙利",
- "id": "印尼",
- "ie": "愛爾蘭",
- "il": "以色列",
- "in": "印度",
- "is": "冰島",
- "it": "義大利",
- "jm": "牙買加",
- "jo": "約旦",
- "jp": "日本",
- "ke": "肯亞",
- "kg": "吉爾吉斯",
- "kh": "柬埔寨",
- "kn": "聖克里斯多福及尼維斯",
- "kr": "大韓民國",
- "kw": "科威特",
- "ky": "開曼群島",
- "kz": "哈薩克",
- "la": "寮人民民主共和國",
- "lb": "黎巴嫩",
- "lc": "聖露西亞",
- "lk": "斯里蘭卡",
- "lr": "賴比瑞亞",
- "lt": "立陶宛",
- "lu": "盧森堡",
- "lv": "拉脫維亞",
- "md": "摩爾多瓦共和國",
- "mg": "馬達加斯加",
- "mk": "北馬其頓",
- "ml": "馬利",
- "mn": "蒙古",
- "mo": "澳門",
- "mr": "茅利塔尼亞",
- "ms": "蒙哲臘",
- "mt": "馬爾他",
- "mu": "模里西斯",
- "mw": "馬拉威",
- "mx": "墨西哥",
- "my": "馬來西亞",
- "mz": "莫三比克",
- "na": "納米比亞",
- "ne": "尼日",
- "ng": "奈及利亞",
- "ni": "尼加拉瓜",
- "nl": "荷蘭",
- "no": "挪威",
- "np": "尼泊爾",
- "nz": "紐西蘭",
- "om": "阿曼",
- "pa": "巴拿馬",
- "pe": "祕魯",
- "pg": "巴布亞紐幾內亞",
- "ph": "菲律賓",
- "pk": "巴基斯坦",
- "pl": "波蘭",
- "pt": "葡萄牙",
- "pw": "帛琉",
- "py": "巴拉圭",
- "qa": "卡達",
- "ro": "羅馬尼亞",
- "ru": "俄羅斯",
- "sa": "沙烏地阿拉伯",
- "sb": "索羅門群島",
- "sc": "塞席爾",
- "se": "瑞典",
- "sg": "新加坡",
- "si": "斯洛維尼亞",
- "sk": "斯洛伐克",
- "sl": "獅子山",
- "sn": "塞內加爾",
- "sr": "蘇利南",
- "st": "聖多美普林西比",
- "sv": "薩爾瓦多",
- "sz": "史瓦濟蘭",
- "tc": "土克斯及開科斯群島",
- "td": "查德",
- "th": "泰國",
- "tj": "塔吉克",
- "tm": "土庫曼",
- "tn": "突尼西亞",
- "tr": "土耳其",
- "tt": "千里達及托巴哥",
- "tw": "台灣",
- "tz": "坦尚尼亞",
- "ua": "烏克蘭",
- "ug": "烏干達",
- "us": "美國",
- "uy": "烏拉圭",
- "uz": "烏茲別克",
- "vc": "聖文森及格瑞那丁",
- "ve": "委內瑞拉",
- "vg": "英屬維京群島",
- "vn": "越南",
- "ye": "葉門",
- "za": "南非",
- "zw": "辛巴威"
- },
- "OfficeUpdateChannel": {
- "current": "目前通道",
- "deferred": "半年企業通道",
- "firstReleaseCurrent": "目前通道 (預覽)",
- "firstReleaseDeferred": "半年企業通道 (預覽)",
- "monthlyEnterprise": "每月企業通道",
- "placeHolder": "選取一項"
- },
- "AppProtection": {
- "allAppTypes": "以所有應用程式類型為目標",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Android 工作設定檔中的應用程式",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "具有 Microsoft Entra 共用模式的 Android 企業專用裝置上的應用程式",
- "appsOnAndroidOpenSourceProjectUserAssociated": "與 Android 開放原始碼專案使用者相關聯的應用程式",
- "appsOnAndroidOpenSourceProjectUserless": "Android 開放原始碼上的應用程式專案無使用者",
- "appsOnIntuneManagedDevices": "Intune 受控裝置上的應用程式",
- "appsOnUnmanagedDevices": "非受控裝置上的應用程式",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS、Android、Mac",
- "iosAndroidPlatformLabel": "iOS、Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "無法使用",
- "windows10PlatformLabel": "Windows 10 及更新版本",
- "withEnrollment": "有註冊",
- "withoutEnrollment": "沒有註冊"
- },
- "DisplayRoleTypes": {
- "builtInRole": "內建角色",
- "customCloudPCRole": "自訂 Windows 365 角色",
- "customIntuneRole": "自訂 Intune 角色",
- "customRole": "自訂角色"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} 包含在一或多個原則集中。如果刪除 {0},您將無法再透過這些原則集加以指派。仍要刪除嗎?",
- "contentWithError": "{0} 可能包含在一或多個原則集中。如果刪除 {0},您將無法再透過這些原則集加以指派。仍要刪除嗎?",
- "header": "確定要刪除此限制嗎?"
- },
- "DeviceLimit": {
- "description": "指定使用者可註冊的裝置上限數。",
- "header": "裝置限制",
- "info": "定義每個使用者可註冊的裝置數。"
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "必須為 1.0 或更高版本。",
- "android": "請輸入有效的版本號碼。範例: 5.0、5.5.1、6.0.0.1",
- "androidForWork": "請輸入有效的版本號碼。範例: 5.0、5.1.1",
- "iOS": "請輸入有效的版本號碼。範例: 9.0、10.0、9.0.2",
- "mac": "輸入有效的版本號碼。範例: 10, 10.10, 10.10.1",
- "min": "最小值不能低於 {0}",
- "minMax": "最小版本不可大於最大版本。",
- "windows": "必須是 10.0 或更高版本。若要允許 8.1 裝置,請保留空白",
- "windowsMobile": "必須是 10.0 或更高版本。若要允許 8.1 裝置,請保留空白"
- },
- "allPlatformsBlocked": "所有裝置平台皆已封鎖。請允許平台註冊,以啟用平台設定。",
- "blockManufacturerPlaceHolder": "製造商名稱",
- "blockManufacturersHeader": "封鎖的製造商",
- "cannotRestrict": "不支援限制",
- "configurationDescription": "指定裝置註冊時必須符合的平台設定限制。您可以使用合規性政策限制註冊後的裝置。將版本定義為 major.minor.build。只有在公司入口網站註冊的裝置才會套用版本限制。根據預設,Intune 會將裝置分類為個人擁有。若要將裝置分類為公司擁有,需要執行其他動作。",
- "configurationDescriptionLabel": "深入了解如何設定註冊限制",
- "configurations": "設定平台",
- "deviceManufacturer": "裝置製造商",
- "header": "裝置類型限制",
- "info": "定義可註冊哪些平台、版本及管理類型。",
- "manufacturer": "製造商",
- "max": "最大值",
- "maxVersion": "版本上限",
- "min": "最小值",
- "minVersion": "最小版本",
- "newPlatforms": "您允許了新平台。請考慮更新平台設定。",
- "personal": "個人所擁有",
- "platform": "平台",
- "platformDescription": "您可以允許註冊下列平台。僅封鎖不受支援的平台。可以使用其他註冊限制來設定允許的平台。",
- "platformSettings": "平台設定",
- "platforms": "選取平台",
- "platformsSelected": "選取了 {0} 個平台",
- "type": "類型",
- "versions": "版本",
- "versionsRange": "允許最小/最大範圍:",
- "windowsTooltip": "透過行動裝置管理來限制註冊。不限制 PC 代理程式的安裝。只支援 Windows 10 和 Windows 11 版本。將版本保留空白即可允許 Windows 8.1。"
- },
- "Priority": {
- "saved": "已成功儲存限制的優先順序。"
- },
- "Row": {
- "announce": "優先順序: {0},名稱: {1},已指派: {2}"
- },
- "Table": {
- "deployed": "已部署",
- "name": "名稱",
- "priority": "優先順序"
- },
- "Type": {
- "limit": "裝置限制的限制",
- "type": "裝置類型的限制"
- },
- "allUsers": "所有使用者",
- "androidRestrictions": "Android 限制",
- "create": "建立限制",
- "defaultLimitDescription": "這項預設裝置上限會以最低優先順序套用至所有使用者,而不論群組成員資格。",
- "defaultTypeDescription": "這項預設裝置類型限制會以最低優先順序套用至所有使用者,而不論群組成員資格。",
- "defaultWhfbDescription": "這是預設 Windows Hello 企業版設定,會以最低優先順序套用至所有使用者,而不論群組成員資格。",
- "deleteMessage": "受影響的使用者會受到指派的次一優先順序限制的限制,若未指派任何其他限制,則會是預設的限制。",
- "deleteTitle": "確定要刪除 {0} 限制嗎?",
- "descriptionHint": "短文,描述以限制的設定作為特性的商務用途或限制等級。",
- "edit": "編輯限制",
- "info": "裝置必須符合指派到其使用者的最高優先順序註冊限制。您可以拖曳裝置限制來變更其優先順序。預設限制對所有使用者而言都是最低優先順序,並且會治理使用者未參與的註冊。預設限制可以編輯但無法刪除。",
- "iosRestrictions": "iOS 限制",
- "mDM": "MDM",
- "macRestrictions": "macOS 限制",
- "maxVersion": "最大版本",
- "minVersion": "最小版本",
- "nameHint": "這將是可見的主要屬性,用以識別所設定的限制。",
- "noAssignmentsStatusBar": "將限制指派到至少一個群組。按一下 [屬性]。",
- "nonAdminForbiddenCreateError": "您必須是 Intune 服務或全域管理員,才能建立、編輯或刪除限制。",
- "nonAdminForbiddenEdit": "您必須是系統管理員才能編輯限制。",
- "notFound": "找不到限制。可能已將其刪除。",
- "personallyOwned": "個人擁有的裝置",
- "restriction": "限制",
- "restrictionLowerCase": "限制",
- "restrictionType": "Restriction Type",
- "selectType": "選取限制類型",
- "selectValidation": "請選取平台",
- "typeHint": "選擇裝置類型限制可限制裝置的屬性。選擇裝置限制的限制,則可限制每位使用者的裝置數目。",
- "typeRequired": "需要限制類型。",
- "winPhoneRestrictions": "Windows Phone 限制",
- "windowsECv1Info": "無法編輯或重新排序較舊的註冊限制,只能刪除。",
- "windowsECv2Info": "您可以拖放註冊限制,以設定其優先順序。檢視下方的預設和預先設定的限制。對於所有新的註冊限制,優先順序都會高於預設和預先設定的限制。",
- "windowsRestrictions": "Windows 限制",
- "windowsRestrictionsPreview": "以篩選為基礎的 Windows 限制 (預覽)"
- },
- "InstallContextType": {
- "device": "裝置",
- "deviceContext": "裝置內容",
- "user": "使用者",
- "userContext": "使用者內容"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "描述",
- "placeholder": "輸入描述"
- },
- "NameTextBox": {
- "label": "名稱",
- "placeholder": "輸入名稱"
- },
- "PublisherTextBox": {
- "label": "發行者",
- "placeholder": "輸入發行者"
- },
- "VersionTextBox": {
- "label": "版本"
- },
- "headerDescription": "依據您編寫的偵測及補救指令碼,建立新的自訂指令碼套件。"
- },
- "ScopeTags": {
- "headerDescription": "選取一或多個群組以指派指令碼套件。"
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "偵測指令碼",
- "placeholder": "輸入指令碼文字",
- "requiredValidationMessage": "請輸入偵測指令碼"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "強制執行指令碼簽章檢查"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "使用登入認證執行此指令碼"
- },
- "RemediationScript": {
- "infoBox": "此指令碼因為沒有補救指令碼,所以只會在「只偵測」模式下執行。"
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "補救指令碼",
- "placeholder": "輸入指令碼文字"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "在 64 位元的 PowerShell 中執行指令碼"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "指令碼無效。指令碼中使用了一或多個無效的字元。"
- },
- "headerDescription": "從您撰寫的指令碼建立自訂指令碼套件。根據預設,指令碼會每天在指派的裝置上執行。",
- "infoBox": "這是唯讀的指令碼。系統可能已封鎖此指令碼的某些設定。"
- },
- "title": "建立自訂指令碼",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "間隔",
- "time": "日期與時間"
- },
- "Interval": {
- "day": "每天重複一次",
- "days": "每 {0} 天重複一次",
- "hour": "每小時重複一次",
- "hours": "每隔 {0} 小時重複一次",
- "month": "每月重複一次",
- "months": "每 {0} 個月重複一次",
- "week": "每週重複一次",
- "weeks": "每 {0} 週重複一次"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{1} {0} (UTC)",
- "withDate": "{0} {1}"
- }
- }
- },
- "Edit": {
- "title": "編輯 - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "允許的 URL",
- "tooltip": "指定會在您使用者處於工作內容時允許的網站。所有其他網站將受到封鎖。您可以選擇設定允許/封鎖清單,但無法同時設定兩者。"
- },
- "ApplicationProxyRedirection": {
- "header": "應用程式 Proxy",
- "title": "應用程式 Proxy 重新導向",
- "tooltip": "啟用應用程式 Proxy 重新導向,能讓使用者存取公司連結和內部部署 Web 應用程式。"
- },
- "BlockedURLs": {
- "title": "封鎖的 URL",
- "tooltip": "指定會在您使用者處於工作內容時封鎖的網站。所有其他網站將不受封鎖。您可以選擇設定允許/封鎖清單,但無法同時設定兩者。"
- },
- "Bookmarks": {
- "header": "受控書籤",
- "tooltip": "請輸入已加入書籤的 URL 清單,供您的使用者在其工作內容中使用 Microsoft Edge 時利用。",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "受控首頁",
- "title": "首頁捷徑 URL",
- "tooltip": "設定首頁捷徑,當使用者在 Microsoft Edge 中開啟新的索引標籤時,這會是他們在搜尋列下方看見的第一個圖示。"
- },
- "PersonalContext": {
- "label": "將受限制網站重新導向至個人內容",
- "tooltip": "設定是否應允許使用者將他們的個人內容轉換至開放的受限網站。"
- }
- },
- "BooleanActions": {
- "allow": "允許",
- "block": "封鎖",
- "configured": "已設定",
- "disable": "停用",
- "dontRequire": "不需要",
- "enable": "啟用",
- "hide": "隱藏",
- "limit": "限制",
- "notConfigured": "未設定",
- "require": "需要",
- "show": "顯示",
- "yes": "是"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "將使用者設為選擇性更新供使用者使用",
- "optionalValue": "選擇性",
- "required": "將使用者設定為必要更新供使用者使用",
- "requiredValue": "必要"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 天",
- "twoDays": "2 天",
- "zeroDays": "0 天"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "概觀"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "依裝置、使用者或品質更新版本搜尋。"
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "無法載入 iOS 軟體更新設定檔"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS 更新設定檔",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "設定檔"
- },
- "listLoadError": "無法載入 iOS 軟體更新設定檔,請稍後再試一次",
- "lowercase": "iOS 更新原則",
- "uppercase": "iOS 更新原則"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "抱歉! 我們無法與 Apple 連線,取得可用版本的清單。請稍後再試一次,或繼續使用最新版本。",
- "latestUpdate": "最近的更新",
- "noLongerSupported": "已不再支援選取的版本",
- "olderVersionSelected": "因為您選取了較舊的版本,所以請務必套用裝置限制原則,延遲可看見軟體更新的時間,讓裝置無法更新至最新版本。",
- "prefix": "安裝 iOS/iPadOS",
- "selectSupported": "選取 Apple 支援的更新版本",
- "updateToInstall": "要安裝的更新"
- },
- "Schedule": {
- "always": "下次簽入時更新",
- "duringTimeWindows": "在排程時間的期間內更新",
- "header": "根據預設,將更新原則指派給裝置後,Intune 便會在裝置簽入時,部署最新的更新。您也可以建立每週排程,自訂開始與結束的時間。若選擇在排程時間之外進行更新,Intune 會等到排程的時間結束之後,才部署更新。",
- "infoBalloon": "發生更新的時間。需要額外的輸入,才可在排程時間內或排程時間外,排程更新。",
- "label": "排程類型",
- "outsideActiveHours": "在使用中之時段以外的時間更新 (舊版)",
- "outsideTimeWindows": "在排程時間的期間外更新",
- "timeWindow": "時間範圍",
- "timeZone": "時區",
- "title": "更新原則排程設定:",
- "weekly": "每週排程",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "更新時,要在裝置上安裝的 iOS/iPadOS 版本。",
- "label": "選取要安裝的版本"
- },
- "header": "建立設定檔,以強制指派的裝置自動安裝最新的 iOS/iPadOS 更新。這些設定會決定軟體更新部署的方式及時機。此設定檔不會造成使用者無法手動更新 OS,但可以透過裝置設定限制原則來禁止手動更新,最長可達 90 天。更新只會套用至受監督的裝置。",
- "notAvailable": "N/A"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "目前沒有任何 iOS 更新原則可供顯示",
- "macOsUpdates": "目前沒有任何可顯示的 macOS 軟體更新原則",
- "windowsUpdates": "沒有適用於 Windows 10 及更新版本的更新通道可供顯示。"
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "裝置名稱",
- "deviceUpdateStatus": "裝置更新狀態",
- "lastUpdated": "上次更新日期",
- "osVersion": "作業系統版本",
- "userPrincipalName": "使用者名稱"
- },
- "maximumOSVersionFilter": "最大 OS 版本",
- "minimumOSVersionFilter": "最小 OS 版本",
- "noData": "無任何可顯示的資料",
- "searchBoxPlaceholder": "依裝置名稱、使用者名稱或 OS 版本搜尋",
- "title": "macOS 裝置的帳戶摘要"
- },
- "Category": {
- "configurationDataFile": "設定資料檔案",
- "critical": "嚴重",
- "firmware": "韌體",
- "other": "其他"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "上次更新日期",
- "successfulUpdateCount": "部署更新成功",
- "totalUpdateCount": "部署的更新總數",
- "updateCategory": "更新類別",
- "updateCategoryStatus": "更新類別狀態"
- },
- "noData": "無任何可顯示的資料"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "無法載入 macOS 軟體更新設定檔"
- }
- },
- "State": {
- "available": "可用的",
- "commandFailed": "命令失敗",
- "downloadFailed": "下載失敗",
- "downloadInsufficientNetwork": "下載網路不足",
- "downloadInsufficientPower": "下載電力不足",
- "downloadInsufficientSpace": "下載空間不足",
- "downloaded": "已下載",
- "downloading": "下載中",
- "idle": "閒置",
- "installFailed": "安裝失敗",
- "installInsufficientPower": "安裝電力不足",
- "installInsufficientSpace": "安裝空間不足",
- "installing": "正在安裝",
- "scheduled": "已排程",
- "success": "成功",
- "unknown": "未知"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "上次更新日期",
- "updateName": "更新名稱",
- "updateStatus": "更新狀態",
- "version": "版本"
- },
- "noData": "無任何可顯示的資料",
- "searchBoxPlaceholder": "依更新名稱或版本搜尋"
- },
- "SummaryBlade": {
- "subtitle": "macOS 更新設定檔",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "設定檔"
- },
- "error": "錯誤",
- "errorOrErrors": "錯誤",
- "errors": "錯誤",
- "listLoadError": "無法載入 macOS 軟體更新設定檔,請稍後再試一次",
- "lowercase": "macOs 更新原則",
- "other": "其他",
- "subtitle": "MacOS 軟體更新",
- "upToDate": "最新資訊",
- "uppercase": "macOS 更新原則"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "請稍後再試",
- "title": "無法刪除 {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "請稍後再試"
- },
- "LoadConfigurationFailed": {
- "description": "請稍後再試",
- "title": "無法載入 {0}"
- },
- "idWrongFormat": "為設定檔提供的識別碼不是預期的格式。"
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "至少須選取一個時間範圍",
- "tooMany": "最多可設定 20 個時間範圍"
- }
- },
- "endDay": "結束日",
- "endTime": "結束時間",
- "startDay": "開始日",
- "startTime": "開始時間",
- "timeWindowError": "請選擇至少跨越一小時的時段。"
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "無法載入 Windows 10 及更新版本的更新通道設定檔。"
- }
- },
- "SummaryBlade": {
- "subtitle": "Windows 10 及更新版本的更新通道",
- "title": "商務用 Windows Update"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 及更新版本",
- "title": "Windows 10 及更新版本的更新通道"
- },
- "listLoadError": "無法載入 Windows 10 及更新版本的更新通道設定檔,請稍後再試一次",
- "lowercase": "更新通道",
- "uppercase": "更新通道"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "更新原則設定",
- "updateRingSettings": "更新通道設定"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "建立 {0}",
- "edit": "編輯 {0}"
- }
- },
- "notScannedYet": "尚未掃描",
- "outOfDateIosDevices": "過時的 iOS 裝置"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "裝置限制 (裝置擁有者)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS 更新原則"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "等於",
+ "greaterThan": "大於",
+ "greaterThanOrEqualTo": "大於或等於",
+ "lessThan": "小於",
+ "lessThanOrEqualTo": "小於或等於",
+ "notEqualTo": "不等於"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "強制執行指令碼簽章檢查,並以無訊息模式執行指令碼",
+ "enforceSignatureCheckTooltip": "選取 [是] 可驗證指令碼是否由信任的發行者簽署,這能使指令碼執行時不顯示任何警告或提示。指令碼會在已解除封鎖的情況下執行。選取 [否] (預設) 會以終端使用者確認執行指令碼,而不經過簽章驗證。",
+ "header": "使用自訂偵測指令碼",
+ "runAs32Bit": "在 64 位元用戶端上以 32 位元處理序的形式執行指令碼",
+ "runAs32BitTooltip": "選取 [是] 會在 64 位元用戶端上以 32 位元處理序的形式執行指令碼。選取 [否] (預設) 會在 64 位元用戶端上以 64 位元處理序的形式執行指令碼。32 位元用戶端會以 32 位元處理序的形式執行指令碼。",
+ "scriptContent": "指令碼內容",
+ "scriptFile": "指令檔",
+ "scriptFileNotSelectedValidation": "未選取任何指令檔。",
+ "scriptFileTooltip": "請選取會偵測應用程式是否存在用戶端上的 PowerShell 指令碼。當指令碼同時傳回 0 值結束代碼且對 STDOUT 寫入字串值時,會偵測到應用程式。",
+ "scriptSizeLimitValidation": "您的偵測指令碼超過允許的大小上限。縮小偵測指令碼的大小以解決此問題。"
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "建立日期",
+ "dateModified": "修改日期",
+ "doesNotExist": "檔案或資料夾不存在",
+ "fileOrFolderExists": "檔案或資料夾存在",
+ "sizeInMB": "大小 (MB)",
+ "version": "字串 (版本)"
+ },
+ "associatedWith32Bit": "已與 64 位元用戶端上的 32 位元應用程式建立關聯",
+ "associatedWith32BitTooltip": "選取 [是] 會展開 64 位元用戶端上 32 位元內容中的所有路徑環境變數。選取 [否] (預設) 會展開 64 位元用戶端上 64 位元內容中的所有路徑變數。32 位元用戶端一律會使用 32 位元內容。",
+ "detectionMethod": "偵測方法",
+ "detectionMethodTooltip": "請為要用來驗證應用程式是否存在的偵測方法選取類型。",
+ "fileOrFolder": "檔案或資料夾",
+ "fileOrFolderToolTip": "要偵測的檔案或資料夾。",
+ "operator": "運算子",
+ "operatorTooltip": "請為要用來驗證比較的偵測方法選取運算子。",
+ "path": "路徑",
+ "pathTooltip": "包含所要偵測檔案或資料夾的資料夾完整路徑。",
+ "value": "值",
+ "valueTooltip": "選取符合所選偵測方法的值。日期偵測方法應以當地時間輸入。"
+ },
+ "GridColumns": {
+ "pathOrCode": "路徑/代碼",
+ "type": "類型"
+ },
+ "MsiRule": {
+ "operator": "運算子",
+ "operatorTooltip": "請為 MSI 產品版本驗證比較選取運算子。",
+ "productCode": "MSI 產品代碼",
+ "productCodeTooltip": "應用程式的有效 MSI 產品代碼。",
+ "productVersion": "值",
+ "productVersionCheck": "MSI 產品版本檢查",
+ "productVersionCheckTooltip": "選取 [是] 則除了 MSI 產品代碼以外,也會驗證 MSI 產品版本。",
+ "productVersionTooltip": "請輸入應用程式的 MSI 產品版本。"
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "整數比較",
+ "keyDoesNotExist": "機碼不存在",
+ "keyExists": "機碼存在",
+ "stringComparison": "字串比較",
+ "valueDoesNotExist": "值不存在",
+ "valueExists": "值存在",
+ "versionComparison": "版本比較"
+ },
+ "associatedWith32Bit": "已與 64 位元用戶端上的 32 位元應用程式建立關聯",
+ "associatedWith32BitTooltip": "選取 [是] 會搜尋 64 位元用戶端上的 32 位元登錄。選取 [否] (預設) 會搜尋 64 位元用戶端上的 64 位元登錄。32 位元用戶端一律會搜尋 32 位元登錄。",
+ "detectionMethod": "偵測方法",
+ "detectionMethodTooltip": "請為要用來驗證應用程式是否存在的偵測方法選取類型。",
+ "keyPath": "機碼路徑",
+ "keyPathTooltip": "包含所要偵測值的登錄項目完整路徑。",
+ "operator": "運算子",
+ "operatorTooltip": "請為要用來驗證比較的偵測方法選取運算子。",
+ "value": "值",
+ "valueName": "值名稱",
+ "valueNameTooltip": "要偵測之登錄值的名稱。",
+ "valueTooltip": "請選取符合所選偵測方法的值。"
+ },
+ "RuleTypeOptions": {
+ "file": "檔案",
+ "mSI": "MSI",
+ "registry": "登錄"
+ },
+ "gridAriaLabel": "偵測規則",
+ "header": "建立指出應用程式是否存在的規則。",
+ "noRulesSelectedPlaceholder": "未指定任何規則。",
+ "ruleTableLimit": "您最多可以新增 25 項偵測規則",
+ "ruleType": "規則型別",
+ "ruleTypeTooltip": "選擇要新增的偵測規則類型。"
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "使用自訂偵測指令碼",
+ "manual": "手動設定偵測規則"
+ },
+ "bladeTitle": "偵測規則",
+ "header": "設定用於偵測應用程式是否存在的應用程式特定規則。",
+ "rulesFormat": "規則格式",
+ "rulesFormatTooltip": "請選擇要手動設定偵測規則或使用自訂指令碼,來偵測應用程式是否存在。",
+ "selectorLabel": "偵測規則"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "代表使用者接受 Microsoft 軟體授權條款",
"appSuiteConfigurationLabel": "應用程式套件設定",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "已選取 {0} 個語言",
"xmlConfigurationLabel": "XML 設定"
},
- "Filters": {
- "ruleSyntax": "規則語法",
- "filters": "篩選"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "允許使用者變更設定",
- "tooltip": "指定是否允許使用者變更設定。"
- },
- "AllowWorkAccounts": {
- "title": "只允許公司或學校帳戶",
- "tooltip": " 若啟用此設定,使用者將無法在 Outlook 內新增個人電子郵件及儲存體帳戶。若使用者將個人帳戶新增至 Outlook,系統會提示使用者移除該個人帳戶。若使用者不移除個人帳戶,就無法新增公司或學校帳戶。"
- },
- "BlockExternalImages": {
- "title": "封鎖外部影像",
- "tooltip": "啟用封鎖外部影像時,應用程式會禁止下載裝載於網際網路且內嵌在郵件內文中的影像。若設為未設定,預設應用程式設定會設為 [關閉]"
- },
- "ConfigureEmail": {
- "title": "進行電子郵件帳戶設定"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "預設應用程式簽章指出應用程式在撰寫訊息時,是否要使用「取得 Android 版 Outlook」作為預設簽章。若將此設定設為 [關閉],將不會使用此預設簽章; 但使用者可以新增自己的簽章。\r\n\r\n若將此設定設為 [未設定],預設應用程式設定將設為 [開啟]。",
- "iOS": "預設應用程式簽章指出應用程式在撰寫訊息時,是否要使用「取得 iOS 版 Outlook」作為預設簽章。若將此設定設為 [關閉],將不會使用此預設簽章; 但使用者可以新增自己的簽章。\r\n\r\n若將此設定設為 [未設定],預設應用程式設定將設為 [開啟]。"
- },
- "title": "預設應用程式簽章"
- },
- "OfficeFeedReplies": {
- "title": "探索摘要",
- "tooltip": "探索摘要會顯示您最常存取的 Office 檔案。根據預設,當使用者的 Delve 啟用時,此摘要會啟用。當設定為未設定時,預設應用程式設定會設為 [開啟]。"
- },
- "OrganizeMailByThread": {
- "title": "依執行緒整理郵件",
- "tooltip": "Outlook 中的預設行為是將郵件交談組合為執行緒交談檢視。如果停用此設定,Outlook 會分別顯示每個郵件,而且不會依執行緒將其分組。"
- },
- "PlayMyEmails": {
- "title": "播放我的電子郵件",
- "tooltip": "根據預設,應用程式不會啟用 [播放我的電子郵件] 功能,但會透過收件匣中的橫幅,向符合資格的使用者推廣此功能。當設定為 [關閉] 時,應用程式中將不會對符合資格的使用者推廣此功能。即便此功能的設定為 [關閉],使用者仍可選擇從應用程式中手動啟用 [播放我的電子郵件]。當設定為 [未設定] 時,預設的應用程式設定為 [開啟],將會向符合資格的使用者推廣此功能。"
- },
- "SuggestedReplies": {
- "title": "建議的回覆",
- "tooltip": "當您開啟訊息時,Outlook 可能會在訊息下方建議回覆。如果您選取建議的回覆,可以在傳送前編輯回覆。"
- },
- "SyncCalendars": {
- "title": "同步行事曆",
- "tooltip": "設定使用者是否可將 Outlook 行事曆同步到原生行事曆應用程式與資料庫。"
- },
- "TextPredictions": {
- "title": "文字預測",
- "tooltip": "當您撰寫訊息時,Outlook 可以建議字詞與片語。當 Outlook 提供建議時,撥動即可接受。當未設定時,預設應用程式設定將設為 [開啟]。"
- },
- "ThemesEnabled": {
- "title": "佈景主題已啟用",
- "tooltip": "指定使用者能否使用自訂視覺效果的佈景主題。"
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS 裝置"
- },
- "ManagedDesktop": {
- "adminContacts": "系統管理連絡人",
- "appPackaging": "應用程式封裝",
- "autopatchGroups": "自動修補群組",
- "devices": "裝置",
- "featureEnablement": "功能啟用",
- "feedback": "意見反應",
- "gettingStarted": "開始使用",
- "messages": "訊息",
- "onlineResources": "線上資源",
- "policyHealth": "原則健康情況",
- "policyHealthPreview": "原則健康情況 (預覽)",
- "releaseManagement": "發行管理",
- "serviceRequests": "服務要求",
- "settings": "設定",
- "supportRequests": "支援要求",
- "tenantEnrollment": "租用戶註冊",
- "tenantManagement": "租用戶管理"
- },
- "actions": "不符合規定時所採取的動作",
- "advancedExchangeSettings": "Exchange 線上設定",
- "advancedThreatProtection": "適用於端點的 Microsoft Defender",
- "allApps": "所有應用程式",
- "allDevices": "所有裝置",
- "androidFotaDeployments": "Android FOTA 部署",
- "appBundles": "應用程式套件組合",
- "appCategories": "應用程式類別",
- "appConfigPolicies": "應用程式設定原則",
- "appConfigurationStatus": "應用程式設定狀態",
- "appInstallStatus": "應用程式安裝狀態",
- "appLicences": "應用程式授權",
- "appProtectionPolicies": "應用程式保護原則",
- "appProtectionStatus": "應用程式保護狀態",
- "appSelectiveWipe": "應用程式選擇性抹除",
- "appleVppTokens": "Apple VPP 權杖",
- "apps": "應用程式",
- "assign": "指派",
- "assignedPermissions": "指派的權限",
- "assignedRoles": "指派的角色",
- "autopilotDeploymentReport": "Autopilot 部署 (預覽)",
- "autopilotDeploymentReportV2": "Autopilot 部署 2.0 (預覽)",
- "brandingAndCustomization": "自訂",
- "cartProfiles": "購物車設定檔",
- "certificateConnectors": "憑證連接器",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "連結到雲端的裝置 (預覽)",
- "cloudPcActions": "雲端電腦動作 (預覽)",
- "cloudPcMaintenanceWindows": "雲端電腦維護視窗 (預覽)",
- "compliancePolicies": "合規性政策",
- "complianceScriptManagement": "指令碼",
- "complianceScriptManagementPreview": "指令碼 (預覽)",
- "complianceSettings": "合規性政策設定",
- "conditionStatements": "條件陳述式",
- "conditions": "位置",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "組態設定檔",
- "configurationScripts": "設定指令碼",
- "connectorsAndTokens": "連接器與權杖",
- "corporateDeviceIdentifiers": "公司裝置識別碼",
- "customAttributes": "自訂屬性",
- "customNotifications": "自訂通知",
- "deploymentSettings": "部署設定",
- "derivedCredentials": "衍生認證",
- "deviceActions": "裝置動作",
- "deviceCategories": "裝置類別",
- "deviceCleanUp": "裝置清除規則",
- "deviceEnrollmentManagers": "裝置註冊管理員",
- "deviceExecutionStatus": "裝置狀態",
- "deviceLimitEnrollmentRestrictions": "註冊裝置限制",
- "deviceTypeEnrollmentRestrictions": "註冊裝置平台限制",
- "devices": "裝置",
- "discoveredApps": "探索到的應用程式",
- "edgePolicies": "Microsoft Edge 的原則",
- "embeddedSIM": "eSIM 行動數據設定檔 (預覽)",
- "enrollDevices": "註冊裝置",
- "enrollmentFailures": "註冊失敗",
- "enrollmentNotifications": "註冊通知 (預覽)",
- "enrollmentRestrictions": "註冊限制",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange 服務連接器",
- "failuresForCumulativeQualityUpdates": "Windows 累積品質更新失敗",
- "failuresForDriverUpdates": "Windows 驅動程式更新失敗",
- "failuresForFeatureUpdates": "功能更新失敗",
- "failuresForQualityUpdates": "Windows 快速更新失敗",
- "featureFlighting": "功能正式發行前小眾測試",
- "featureUpdateDeployments": "Windows 10 和更新版本的功能更新",
- "flighting": "正式發行前小眾測試",
- "fotaUpdate": "韌體無線更新",
- "groupPolicy": "系統管理範本",
- "groupPolicyAnalytics": "群組原則分析",
- "helpSupport": "說明及支援",
- "helpSupportReplacement": "說明及支援 ({0})",
- "iOSAppProvisioning": "iOS 應用程式佈建設定檔",
- "incompleteUserEnrollments": "未完成的使用者註冊",
- "iosUpdates": "更新 iOS/iPadOS 的原則",
- "legacyPcManagement": "舊版電腦管理",
- "macOSSoftwareUpdate": "更新 macOS 的原則",
- "macOSSoftwareUpdateAccountSummaries": "macOS 裝置的安裝狀態",
- "macOSSoftwareUpdateCategorySummaries": "軟體更新摘要",
- "macOSSoftwareUpdateStateSummaries": "更新",
- "managedGooglePlay": "受控的 Google Play",
- "msfb": "商務用 Microsoft 網上商店",
- "myPermissions": "我的使用權限",
- "notifications": "通知",
- "officeApps": "Office 應用程式",
- "officeProPlusPolicies": "Office 應用程式的原則",
- "onPremise": "內部部署",
- "onPremisesConnector": "Exchange ActiveSync 內部部署連接器",
- "onPremisesDeviceAccess": "Exchange ActiveSync 裝置",
- "onPremisesManageAccess": "Exchange 內部部署存取",
- "outOfDateIosDevices": "iOS 裝置的安裝失敗",
- "overview": "概觀",
- "partnerDeviceManagement": "夥伴裝置管理",
- "perUpdateRingDeploymentState": "依更新通道別部署狀態",
- "permissions": "權限",
- "platformApps": "{0} 個應用程式",
- "platformDevices": "{0} 部裝置",
- "platformEnrollment": "{0} 註冊",
- "policies": "原則",
- "profiles": "設定檔",
- "properties": "屬性",
- "reports": "報表",
- "retireNoncompliantDevices": "淘汰不符合規範的裝置",
- "retireNoncompliantDevicesPreview": "淘汰不符合規範的裝置 (預覽)",
- "role": "角色",
- "scriptManagement": "指令碼",
- "securityBaselines": "安全性基準",
- "serviceToServiceConnector": "Exchange 線上連接器",
- "servicenowConnector": "ServiceNow 連接器",
- "shellScripts": "Shell 指令碼",
- "teamViewerConnector": "TeamViewer 連接器",
- "telecomeExpenseManagement": "電信費用管理",
- "tenantAdmin": "租用戶系統管理員",
- "tenantAdministration": "租用戶系統管理",
- "termsAndConditions": "條款及條件",
- "titles": "標題",
- "troubleshoot": "疑難排解",
- "troubleshootSupport": "疑難排解 + 支援",
- "user": "使用者",
- "userExecutionStatus": "使用者狀態",
- "wdacSupplementalPolicies": "S 模式補充原則",
- "win32CatalogUpdateApp": "Enterprise App Management 應用程式的更新",
- "win32CatalogUpdateAppInPreview": "Windows (Win32) 目錄應用程式 (預覽) 的更新",
- "windows10DriverUpdate": "Windows 10 和更新版本的驅動程式更新",
- "windows10QualityUpdate": "Windows 10 和更新版本的品質更新",
- "windows10UpdateRings": "Windows 10 及更新版本的更新通道",
- "windows10XPolicyFailures": "Windows 10X 原則失敗",
- "windows365PartnerConnector": "Windows 365 合作夥伴連接器",
- "windowsDiagnosticData": "Windows 資料",
- "windowsEnterpriseCertificate": "Windows Enterprise 憑證",
- "windowsManagement": "指令碼",
- "windowsSideLoadingKeys": "Windows 側載金鑰",
- "windowsSymantecCertificate": "Windows DigiCert 憑證",
- "windowsThreatReport": "威脅代理程式狀態"
- },
- "ScopeTypes": {
- "allDevices": "所有裝置",
- "allUsers": "所有使用者",
- "allUsersAndDevices": "所有使用者與所有裝置",
- "selectedGroups": "選取的群組"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "以 Microsoft 搜尋為預設",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "商務用 Skype",
- "oneDrive": "OneDrive 電腦版",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone 和 iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "不支援",
+ "supportEnding": "支援結束",
+ "supported": "受支援"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "預設",
- "header": "更新優先順序",
- "postponed": "已延後",
- "priority": "高優先順序"
- },
- "AutoUpdateSupersededApps": {
- "label": "自動更新",
- "sublabel": "如果使用者從公司入口網站安裝被取代的應用程式,則需要安裝取代的應用程式。"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "背景",
- "displayText": "{0} 中的內容下載",
- "foreground": "前景",
- "header": "傳遞最佳化優先順序"
- },
- "RestartGracePeriod": {
- "allowSnooze": "允許使用者延遲重新啟動通知",
- "countdownDialog": "選取要再重新啟動前,顯示重新啟動倒數對話方塊的時間 (分鐘)",
- "durationInMinutes": "裝置重新啟動寬限期 (分鐘)",
- "snoozeDurationInMinutes": "選取延遲持續時間 (分鐘)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "時區",
- "local": "裝置時區",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "日期和時間",
- "deadlineTimeColumnLabel": "安裝期限",
- "deadlineTimeDatePickerErrorMessage": "選取的日期必須晚於可用日期",
- "deadlineTimeLabel": "應用程式安裝期限",
- "defaultTime": "盡快",
- "infoText": "除非您在下方指定可用時間,否則此應用程式會在部署後立即可用。如果這是必要的應用程式,您可以指定安裝期限。",
- "specificTime": "特定日期與時間",
- "startTimeColumnLabel": "可用性",
- "startTimeDatePickerErrorMessage": "選取的日期必須在期限日期之前",
- "startTimeLabel": "應用程式可用性"
- },
- "restartGracePeriodHeader": "重新啟動寬限期",
- "restartGracePeriodLabel": "裝置重新啟動寬限期",
- "summaryTitle": "終端使用者體驗"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "檔案或資料夾作為選取的需求。",
- "pathToolTip": "要偵測檔案或資料夾的完整路徑。",
- "property": "屬性",
- "valueToolTip": "選取符合所選偵測方法的需求值。應以您當地的格式輸入日期與時間需求。"
- },
- "GridColumns": {
- "pathOrScript": "路徑/指令碼",
- "type": "類型"
- },
- "Registry": {
- "keyPath": "機碼路徑",
- "keyPathTooltip": "包含作為需求之值的登錄項目完整路徑。",
- "operator": "Operator",
- "operatorTooltip": "選取運算子以供比較。",
- "registryRequirement": "登錄機碼需求",
- "registryRequirementTooltip": "選取登錄機碼需求比較。",
- "valueName": "值名稱",
- "valueNameTooltip": "所需登錄值的名稱。"
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "自動核准所有建議的驅動程式更新",
+ "manual": "手動核准及部署驅動程式更新"
+ },
+ "BulkActions": {
+ "button": "大量動作"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "核准方法:"
},
- "RequirementTypeOptions": {
- "fileType": "檔案",
- "registry": "登錄",
- "script": "指令碼"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "布林值",
- "dateTime": "日期與時間",
- "float": "浮點",
- "integer": "整數",
- "string": "字串",
- "version": "版本"
- },
- "duplicateName": "指令碼名稱 {0} 已使用。請輸入其他名稱。",
- "enforceSignatureCheck": "強制執行指令碼簽章檢查",
- "enforceSignatureCheckTooltip": "選取 [是] 可驗證指令碼確實由信任的發行者所簽署,這能使指令碼執行時不顯示任何警告或提示。指令碼會在已解除封鎖的情況下執行。選取 [否] (預設) 會經終端使用者確認後執行指令碼,但不經過簽章驗證。",
- "loggedOnCredentials": "使用登入認證執行此指令碼",
- "loggedOnCredentialsTooltip": "使用已登入的裝置認證執行指令碼。",
- "operatorTooltip": "選取運算子以比較需求。",
- "requirementMethod": "選取輸出資料類型",
- "requirementMethodTooltip": "選取判斷偵測符合需求時所使用的資料類型。",
- "scriptContent": "指令碼內容",
- "scriptFile": "指令碼檔",
- "scriptFileTooltip": "選取將偵測應用程式是否存在於用戶端上的 PowerShell 指令碼。若偵測到應用程式,需求處理序會提供值為 0 的結束代碼,並會將字串值寫入 StdOut。",
- "scriptName": "指令碼名稱",
- "value": "值",
- "valueTooltip": "選取符合所選偵測方法的需求值。應以您當地的格式輸入日期與時間需求。"
+ "DeploymentDeferralInDays": {
+ "label": "在以下日期後提供更新",
+ "units": "(天)",
+ "value": "{0} 天"
+ },
+ "DriverAction": {
+ "header": "在下方選取一個動作。",
+ "label": "驅動程式動作",
+ "placeholder": "選取一個動作"
},
- "bladeTitle": "新增需求規則",
- "createRequirementHeader": "建立需求。",
- "header": "設定其他需求規則",
- "label": "其他需求規則",
- "noRequirementsSelectedPlaceholder": "未指定任何需求。",
- "requirementType": "需求類型",
- "requirementTypeTooltip": "選擇用來判斷如何驗證需求的偵測方法類型。"
- },
- "architectures": "作業系統架構",
- "architecturesTooltip": "請選擇安裝應用程式所需的架構。",
- "bladeTitle": "需求",
- "diskSpace": "所需磁碟空間 (MB)",
- "diskSpaceTooltip": "安裝應用程式所需的系統磁碟機可用磁碟空間。",
- "header": "請指定安裝應用程式前,裝置須滿足的需求:",
- "maximumTextFieldValue": "此值最大不可超過 {0}。",
- "minimumCpuSpeed": "所需的最低 CPU 速度 (MHz)",
- "minimumCpuSpeedTooltip": "安裝應用程式所需的最低 CPU 速度。",
- "minimumLogicalProcessors": "所需的最低邏輯處理器數",
- "minimumLogicalProcessorsTooltip": "安裝應用程式所需的最低邏輯處理器數。",
- "minimumOperatingSystem": "最基本的作業系統",
- "minimumOperatingSystemTooltip": "請選取安裝應用程式所需的最低作業系統。",
- "minumumTextFieldValue": "此值至少須為 {0}。",
- "physicalMemory": "所需的實體記憶體 (MB)",
- "physicalMemoryTooltip": "安裝應用程式所需的實體記憶體 (RAM)。",
- "selectorLabel": "需求",
- "validNumber": "請輸入有效的數字。"
- },
- "PolicySet": {
- "appManagement": "應用程式管理",
- "assignments": "指派",
- "basics": "基本",
- "deviceEnrollment": "裝置註冊",
- "deviceManagement": "裝置管理",
- "scopeTags": "範圍標籤",
- "appConfigurationTitle": "應用程式設定原則",
- "appProtectionTitle": "應用程式保護原則",
- "appTitle": "應用程式",
- "iOSAppProvisioningTitle": "iOS 應用程式佈建設定檔",
- "deviceLimitRestrictionTitle": "裝置限制",
- "deviceTypeRestrictionTitle": "裝置類型限制",
- "enrollmentStatusSettingTitle": "註冊狀態頁面",
- "windowsAutopilotDeploymentProfileTitle": "Windows autopilot 部署設定檔",
- "deviceComplianceTitle": "裝置合規性政策",
- "deviceConfigurationTitle": "裝置組態設定檔",
- "powershellScriptTitle": "PowerShell 指令碼"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "已包含的驅動程式"
+ },
+ "SelectDrivers": {
+ "header": "選取要包含在大量動作中的驅動程式"
+ },
+ "SelectDriversToInclude": {
+ "button": "選取要包含的驅動程式"
+ },
+ "SelectLessDrivers": {
+ "validation": "最多可選取一百個驅動程式"
+ },
+ "SelectMoreDrivers": {
+ "validation": "至少應選取一個驅動程式"
+ },
+ "SelectedDrivers": {
+ "label": "已選取的驅動程式"
+ },
+ "availabilityDate": "設爲可在 Windows Update 中使用",
+ "bladeTitle": "Windows 10 和更新版本的驅動程式更新 (預覽)",
+ "lastSync": "上次同步時間:",
+ "lastSyncDefaultText": "擱置的初始庫存集合",
+ "loadError": "載入失敗!"
+ },
+ "DriverStatus": {
+ "approved": "已核准",
+ "declined": "已拒絕",
+ "export": "正在匯出建議的驅動程式",
+ "needsReview": "需要審核",
+ "paused": "已暫停"
+ },
+ "DriversToReview": {
+ "text": "要檢閱的 {0}"
+ },
+ "Subtitle": {
+ "automatic": "自動核准驅動程式更新原則",
+ "manual": "手動核准驅動程式更新原則"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "建議",
- "CountryNames": {
- "countryNameNR": "諾魯",
- "countryNameBH": "巴林",
- "countryNameZA": "南非",
- "countryNameJO": "約旦",
- "countryNameSD": "蘇丹",
- "countryNameNU": "紐埃島",
- "countryNameCZ": "捷克共和國",
- "countryNameLT": "立陶宛",
- "countryNameTK": "托克勞群島",
- "countryNameEC": "厄瓜多",
- "countryNameVU": "萬那杜",
- "countryNameUG": "烏干達",
- "countryNameLI": "列支敦斯登",
- "countryNameHK": "香港特別行政區",
- "countryNameGH": "迦納",
- "countryNameSA": "沙烏地阿拉伯",
- "countryNamePG": "巴布亞紐幾內亞",
- "countryNameBW": "波札那",
- "countryNameDG": "地牙哥加西亞島",
- "countryNameIN": "印度",
- "countryNameHN": "宏都拉斯",
- "countryNameRO": "羅馬尼亞",
- "countryNameKZ": "哈薩克",
- "countryNameLC": "聖露西亞",
- "countryNameGE": "喬治亞",
- "countryNameTT": "千里達及托巴哥",
- "countryNameMP": "北馬利安納群島",
- "countryNameMV": "馬爾地夫",
- "countryNameFI": "芬蘭",
- "countryNameNO": "挪威",
- "countryNameEE": "愛沙尼亞",
- "countryNameVE": "委內瑞拉",
- "countryNameUZ": "烏茲別克",
- "countryNameME": "蒙特內哥羅",
- "countryNameTJ": "塔吉克",
- "countryNameAW": "荷屬阿魯巴",
- "countryNameFR": "法國",
- "countryNameOM": "阿曼",
- "countryNameAO": "安哥拉",
- "countryNameIT": "義大利",
- "countryNameAZ": "亞塞拜然",
- "countryNameKG": "吉爾吉斯",
- "countryNameWF": "瓦利斯及福杜納群島",
- "countryNameTL": "東帝汶",
- "countryNameFK": "福克蘭群島",
- "countryNameGY": "蓋亞那",
- "countryNameSS": "南蘇丹",
- "countryNameMM": "緬甸",
- "countryNameHT": "海地",
- "countryNameSY": "敘利亞",
- "countryNameMD": "摩爾多瓦",
- "countryNameVC": "聖文森及格瑞那丁",
- "countryNameID": "印尼",
- "countryNameRE": "留尼旺島",
- "countryNameER": "厄利垂亞",
- "countryNameMK": "北馬其頓",
- "countryNameTG": "多哥",
- "countryNamePF": "法屬玻里尼西亞",
- "countryNameKY": "開曼群島",
- "countryNameIO": "英屬印度洋領地",
- "countryNameRU": "俄羅斯",
- "countryNameMA": "摩洛哥",
- "countryNameAU": "澳洲",
- "countryNameBO": "玻利維亞",
- "countryNameVA": "教廷 (梵諦岡)",
- "countryNameVG": "英屬維爾京群島",
- "countryNameFM": "密克羅尼西亞",
- "countryNameAQ": "南極洲",
- "countryNameZM": "尚比亞",
- "countryNameBR": "巴西",
- "countryNameIS": "冰島",
- "countryNamePE": "秘魯",
- "countryNameBG": "保加利亞",
- "countryNamePR": "波多黎各",
- "countryNameGI": "直布羅陀",
- "countryNameBS": "巴哈馬",
- "countryNameJE": "澤西島",
- "countryNameMO": "澳門特別行政區",
- "countryNameRW": "盧安達",
- "countryNameAS": "美屬薩摩亞",
- "countryNameBQ": "波奈、聖佑達修斯和沙巴",
- "countryNameMF": "法屬聖馬丁",
- "countryNameTM": "土庫曼",
- "countryNameML": "馬利",
- "countryNameTO": "東加",
- "countryNameNC": "新喀里多尼亞群島",
- "countryNameAC": "亞森欣島",
- "countryNameBN": "汶萊",
- "countryNameBD": "孟加拉",
- "countryNameMW": "馬拉威",
- "countryNameGM": "甘比亞",
- "countryNameGA": "加彭",
- "countryNameCA": "加拿大",
- "countryNameSH": "聖赫勒拿島",
- "countryNameYT": "馬約特",
- "countryNameMN": "蒙古",
- "countryNamePA": "巴拿馬",
- "countryNameCM": "喀麥隆",
- "countryNameNE": "尼日",
- "countryNameCW": "庫拉索",
- "countryNameJP": "日本",
- "countryNameCY": "賽普勒斯",
- "countryNameCD": "剛果民主共和國",
- "countryNameTN": "突尼西亞",
- "countryNameTR": "土耳其",
- "countryNameWS": "薩摩亞",
- "countryNameSE": "瑞典",
- "countryNameXK": "科索沃",
- "countryNameKH": "柬埔寨",
- "countryNamePL": "波蘭",
- "countryNameDZ": "阿爾及利亞",
- "countryNameLR": "賴比瑞亞",
- "countryNameSO": "索馬利亞",
- "countryNameDM": "多米尼克",
- "countryNameEG": "埃及",
- "countryNameGF": "法屬圭亞那",
- "countryNameNZ": "紐西蘭",
- "countryNamePS": "巴勒斯坦政府",
- "countryNameIL": "以色列",
- "countryNameSL": "獅子山",
- "countryNameGR": "希臘",
- "countryNameNG": "奈及利亞",
- "countryNameMR": "茅利塔尼亞",
- "countryNameVI": "美屬維京群島",
- "countryNameGQ": "赤道幾內亞",
- "countryNameMX": "墨西哥",
- "countryNameDJ": "吉布地",
- "countryNameGN": "幾內亞",
- "countryNameCN": "中國",
- "countryNameMZ": "莫三比克",
- "countryNameBV": "布威島",
- "countryNameNF": "諾福克島",
- "countryNameTZ": "坦尚尼亞",
- "countryNameAI": "安奎拉",
- "countryNameGS": "南喬治亞與南三明治群島",
- "countryNameRS": "塞爾維亞",
- "countryNameCC": "科克斯(基靈)群島",
- "countryNameNA": "納米比亞",
- "countryNameDE": "德國",
- "countryNameCG": "剛果共和國",
- "countryNameKW": "科威特",
- "countryNameMH": "馬紹爾群島",
- "countryNameVN": "越南",
- "countryNameBY": "白俄羅斯",
- "countryNameMY": "馬來西亞",
- "countryNameST": "聖多美和普林西比",
- "countryNameLS": "賴索托",
- "countryNameBI": "浦隆地",
- "countryNameTD": "查德",
- "countryNameCX": "聖誕島",
- "countryNameIR": "伊朗",
- "countryNameTV": "吐瓦魯",
- "countryNameGW": "幾內亞比索",
- "countryNameUA": "烏克蘭",
- "countryNameCU": "古巴",
- "countryNameCO": "哥倫比亞",
- "countryNameNI": "尼加拉瓜",
- "countryNameHR": "克羅埃西亞",
- "countryNameSC": "塞席爾",
- "countryNameNL": "荷蘭",
- "countryNameUM": "美國本土外小島嶼",
- "countryNameIM": "曼島",
- "countryNameFJ": "斐濟",
- "countryNameSR": "蘇利南",
- "countryNameGT": "瓜地馬拉",
- "countryNameSM": "聖馬利諾",
- "countryNameLA": "寮國",
- "countryNameGB": "英國",
- "countryNameBB": "巴貝多",
- "countryNameSI": "斯洛維尼亞",
- "countryNameAM": "亞美尼亞",
- "countryNameAR": "阿根廷",
- "countryNamePM": "聖皮埃與密克隆群島",
- "countryNameTF": "法屬南半球及南極陸地",
- "countryNameDO": "多明尼加共和國",
- "countryNameZW": "辛巴威",
- "countryNameMQ": "馬丁尼克",
- "countryNamePT": "葡萄牙",
- "countryNameCF": "中非共和國",
- "countryNameBE": "比利時",
- "countryNameKM": "葛摩",
- "countryNameLY": "利比亞",
- "countryNameIE": "愛爾蘭",
- "countryNameKP": "北韓",
- "countryNameGG": "根息",
- "countryNameSK": "斯洛伐克",
- "countryNameTC": "土克斯及開科斯群島",
- "countryNameNP": "尼泊爾",
- "countryNameBF": "布吉納法索",
- "countryNameYE": "葉門",
- "countryNameBA": "波士尼亞赫塞哥維納",
- "countryNameGP": "瓜地洛普",
- "countryNameMS": "蒙哲臘",
- "countryNameCL": "智利",
- "countryNameIQ": "伊拉克",
- "countryNameSJ": "挪威屬斯瓦巴及尖棉群島",
- "countryNameAX": "奧蘭群島",
- "countryNameKE": "肯亞",
- "countryNameGU": "關島",
- "countryNameBM": "百慕達",
- "countryNameFO": "法羅群島",
- "countryNameBL": "聖巴泰勒米",
- "countryNameLB": "黎巴嫩",
- "countryNameJM": "牙買加",
- "countryNameAF": "阿富汗",
- "countryNameES": "西班牙",
- "countryNameMC": "摩納哥",
- "countryNameSG": "新加坡",
- "countryNameAL": "阿爾巴尼亞",
- "countryNameSN": "塞內加爾",
- "countryNameSZ": "史瓦帝尼",
- "countryNameBZ": "貝里斯",
- "countryNameCI": "科特迪瓦 (象牙海岸)",
- "countryNameTW": "台灣",
- "countryNameUY": "烏拉圭",
- "countryNameCK": "庫克群島",
- "countryNameTH": "泰國",
- "countryNameHM": "赫德島及麥唐納群島",
- "countryNameGD": "格瑞那達",
- "countryNameUS": "美國",
- "countryNameAT": "奧地利",
- "countryNameKR": "大韓民國",
- "countryNamePK": "巴基斯坦",
- "countryNameDK": "丹麥",
- "countryNameSV": "薩爾瓦多",
- "countryNamePW": "帛琉",
- "countryNameET": "衣索比亞",
- "countryNameMG": "馬達加斯加",
- "countryNameCR": "哥斯大黎加",
- "countryNameLU": "盧森堡",
- "countryNameQA": "卡達",
- "countryNameBT": "不丹",
- "countryNameSB": "所羅門群島",
- "countryNameAE": "阿拉伯聯合大公國",
- "countryNameAD": "安道爾",
- "countryNameCV": "維德角",
- "countryNameAG": "安地卡及巴布達",
- "countryNameMU": "毛里裘斯",
- "countryNameHU": "匈牙利",
- "countryNameSX": "荷屬聖馬丁",
- "countryNameCH": "瑞士",
- "countryNamePN": "皮特肯群島",
- "countryNameGL": "格陵蘭",
- "countryNamePH": "菲律賓",
- "countryNameMT": "馬耳他",
- "countryNameKN": "聖基茨和尼維斯",
- "countryNameLK": "斯里蘭卡",
- "countryNameKI": "吉里巴斯",
- "countryNameBJ": "貝南",
- "countryNameLV": "拉脫維亞",
- "countryNamePY": "巴拉圭"
- }
- }
+ "SyncNotification": {
+ "failure": "無法同步 {0}",
+ "failureDescription": "發生錯誤,無法完成要求的同步。請再試一次。",
+ "pending": "正在進行 {0} 同步",
+ "pendingDescription": "我們正在擷取最新資料。此程序可能需要耗時數分鐘。",
+ "success": "{0} 同步完成",
+ "successDescription": "已於 {0} 完成與 WUfB 服務的同步"
+ },
+ "SyncSpinner": {
+ "text": "正在進行同步。這可能需要幾分鐘。尋找警示或幾分鐘後再查看。"
+ },
+ "TabName": {
+ "basics": "基本",
+ "driverUpdateSettings": "設定",
+ "otherDrivers": "其他驅動程式",
+ "properties": "屬性",
+ "recommendedDrivers": "建議的驅動程式"
+ },
+ "driverAddFilter": "新增篩選",
+ "driverApplicableDevices": "適用裝置",
+ "driverApprovalStatus": "狀態",
+ "driverBulkActions": "大量動作",
+ "driverClass": "驅動程式類別",
+ "driverCount": "目前顯示第 {0} 至 {1} 筆記錄 (共 {2} 筆)",
+ "driverFilterNoneSelected": "未選取任何項目",
+ "driverManufacturer": "製造商",
+ "driverName": "驅動程式名稱",
+ "driverNameLower": "windows 驅動程式更新部署",
+ "driverNameUpper": "Windows 驅動程式更新部署",
+ "driverRefresh": "重新整理",
+ "driverReleaseDate": "發行日期",
+ "driverSearch": "搜尋",
+ "driverSearchKeyword": "輸入搜尋索引鍵",
+ "driverVersion": "版本",
+ "firstDeploymentDate": "第一個部署",
+ "infoBoxText": "在指派及建立原則後,最多需要 24 小時才能填入庫存。",
+ "textBlockText": "選取您的原則核准和部署設定。選擇以設定原則,以自動或手動部署更新。原則建立後即無法變更核准方法,但為指派的裝置建立庫存後,就可以變更個別驅動程式核准和部署詳細資料。"
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge 組態設定",
+ "edgeWindowsDataProtectionSettings": "Edge (Windows) 資料保護設定 - 預覽",
+ "edgeWindowsSettings": "Microsoft Edge (Windows) 設定 - 預覽",
+ "generalAppConfig": "一般應用程式設定",
+ "generalSettings": "一般組態設定",
+ "outlookSMIMEConfig": "Outlook S/MIME 設定",
+ "outlookSettings": "Outlook 組態設定",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Documentation/Strings-zh.json b/Documentation/Strings-zh.json
index c699d0c..694fc4d 100644
--- a/Documentation/Strings-zh.json
+++ b/Documentation/Strings-zh.json
@@ -1,4 +1,1691 @@
{
+ "InstallContextType": {
+ "device": "Device",
+ "deviceContext": "Device context",
+ "user": "User",
+ "userContext": "User context"
+ },
+ "ScheduledAction": {
+ "Form": {
+ "editBlockActionInfo": "One block action is required for all compliance policies.",
+ "graceperiod": "Schedule (days after noncompliance)",
+ "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
+ "subtitle": "Specify action parameters",
+ "title": "Action parameters"
+ },
+ "List": {
+ "gracePeriodDay": "{0} day after noncompliance",
+ "gracePeriodDays": "{0} days after noncompliance",
+ "gracePeriodHour": "{0} hour after noncompliance",
+ "gracePeriodHours": "{0} hours after noncompliance",
+ "gracePeriodMinute": "{0} minute after noncompliance",
+ "gracePeriodMinutes": "{0} minutes after noncompliance",
+ "immediately": "Immediately",
+ "schedule": "Schedule",
+ "scheduleInfoBalloon": "Days after noncompliance",
+ "subtitle": "Specify the sequence of actions on noncompliant devices",
+ "title": "Actions"
+ },
+ "Notification": {
+ "additionalEmailLabel": "Others",
+ "additionalRecipients": "Additional recipients (via email)",
+ "additionalRecipientsBladeTitle": "Select additional recipients",
+ "emailAddressPrompt": "Enter email addresses (separated by commas)",
+ "invalidEmail": "Invalid email address",
+ "messageTemplate": "Message template",
+ "noneSelected": "None selected",
+ "notSelected": "Not selected",
+ "numSelected": "{0} selected",
+ "selected": "Selected"
+ },
+ "block": "Mark device noncompliant",
+ "lockDevice": "Lock device (local action)",
+ "lockDeviceWithPasscode": "Lock device (local action)",
+ "noAction": "No action",
+ "noActionRow": "No actions, select 'Add' to add an action",
+ "pushNotification": "Send push notification to end user",
+ "remoteLock": "Remotely lock the noncompliant device",
+ "removeSourceAccessProfile": "Remove source access profile",
+ "retire": "Add device to retire list",
+ "wipe": "Wipe",
+ "emailNotification": "Send email to end user"
+ },
+ "RoleAssignment": {
+ "RoleAssignmentAdmin": "Admin Groups",
+ "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
+ "rolesMenuTitle": "Endpoint Manager roles",
+ "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
+ "RoleAssignmentScope": "Scope Groups"
+ },
+ "AppInformationTab": {
+ "Info": {
+ "AppStoreUrl": {
+ "android": "Enter the link to the app listing in Google Play store. For example:",
+ "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
+ "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
+ "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
+ "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
+ "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
+ "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ },
+ "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
+ "applicableDeviceType": "Select the device types that can install this app.",
+ "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
+ "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
+ "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
+ "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
+ "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
+ "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
+ "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
+ "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
+ "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
+ "learnMore": "Learn more",
+ "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
+ "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
+ "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
+ "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
+ "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
+ "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
+ "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
+ "packageId": "The app Package Identifier is the unique value that identifies the app.",
+ "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
+ "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
+ "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
+ "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
+ "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
+ "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
+ "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
+ "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
+ "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
+ "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
+ },
+ "descriptionPreview": "Preview",
+ "descriptionRequired": "Description is required.",
+ "editDescription": "Edit Description",
+ "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
+ "name": "App information",
+ "nameForOfficeSuitApp": "App suite information"
+ },
+ "ScopeTypes": {
+ "allDevices": "All Devices",
+ "allUsers": "All Users",
+ "allUsersAndDevices": "All Users & All Devices",
+ "selectedGroups": "Selected Groups"
+ },
+ "ProactiveRemediations": {
+ "Create": {
+ "Basics": {
+ "DescriptionMultiLineTextBox": {
+ "label": "Description",
+ "placeholder": "Enter a description"
+ },
+ "NameTextBox": {
+ "label": "Name",
+ "placeholder": "Enter a name"
+ },
+ "PublisherTextBox": {
+ "label": "Publisher",
+ "placeholder": "Enter a publisher"
+ },
+ "VersionTextBox": {
+ "label": "Version"
+ },
+ "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
+ },
+ "ScopeTags": {
+ "headerDescription": "Select one or more groups to assign the script package."
+ },
+ "Settings": {
+ "DetectionScriptMultiLineTextBox": {
+ "label": "Detection script",
+ "placeholder": "Input script text",
+ "requiredValidationMessage": "Please enter the detection script"
+ },
+ "EnforceScriptSignatureCheckOptionPicker": {
+ "label": "Enforce script signature check"
+ },
+ "LoggedOnCredentialsOptionPicker": {
+ "label": "Run this script using the logged-on credentials"
+ },
+ "RemediationScript": {
+ "infoBox": "This script will run in detect-only mode because there is no remediation script."
+ },
+ "RemediationScriptMultiLineTextBox": {
+ "label": "Remediation script",
+ "placeholder": "Input script text"
+ },
+ "RunIn64BitPSOptionPicker": {
+ "label": "Run script in 64-bit PowerShell"
+ },
+ "ScriptMultiLineTextBox": {
+ "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
+ },
+ "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
+ "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
+ },
+ "title": "Create custom script",
+ "ScriptProperties": {
+ "GridHeaders": {
+ "interval": "Interval",
+ "time": "Date and time"
+ },
+ "Interval": {
+ "day": "Repeats every day",
+ "days": "Repeats every {0} days",
+ "hour": "Repeats every hour",
+ "hours": "Repeats every {0} hours",
+ "month": "Repeats every month",
+ "months": "Repeats every {0} months",
+ "week": "Repeats every week",
+ "weeks": "Repeats every {0} weeks"
+ },
+ "Time": {
+ "utc": "{0} (UTC)",
+ "utcWithDate": "{0} (UTC) on {1}",
+ "withDate": "{0} on {1}"
+ }
+ }
+ },
+ "Edit": {
+ "title": "Edit - {0}"
+ }
+ },
+ "MinimumOperatingSystem": {
+ "Android": {
+ "v10": "Android 10.0",
+ "v11": "Android 11.0",
+ "v4": "Android 4.0 (Ice Cream Sandwich)",
+ "v403": "Android 4.0.3 (Ice Cream Sandwich)",
+ "v41": "Android 4.1 (Jelly Bean)",
+ "v42": "Android 4.2 (Jelly Bean)",
+ "v43": "Android 4.3 (Jelly Bean)",
+ "v44": "Android 4.4 (KitKat)",
+ "v5": "Android 5.0 (Lollipop)",
+ "v51": "Android 5.1 (Lollipop)",
+ "v6": "Android 6.0 (Marshmallow)",
+ "v7": "Android 7.0 (Nougat)",
+ "v71": "Android 7.1 (Nougat)",
+ "v8": "Android 8.0 (Oreo)",
+ "v81": "Android 8.1 (Oreo)",
+ "v9": "Android 9.0 (Pie)"
+ },
+ "IOS": {
+ "v10": "iOS 10.0",
+ "v11": "iOS 11.0",
+ "v12": "iOS 12.0",
+ "v13": "iOS 13.0",
+ "v14": "iOS 14.0",
+ "v15": "iOS 15.0",
+ "v16": "iOS 16.0",
+ "v17": "iOS 17.0",
+ "v8": "iOS 8.0",
+ "v9": "iOS 9.0"
+ },
+ "MacOS": {
+ "V10": {
+ "10": "OS X Yosemite 10.10",
+ "11": "OS X El Capitan 10.11",
+ "12": "macOS Sierra 10.12",
+ "13": "macOS High Sierra 10.13",
+ "14": "macOS Mojave 10.14",
+ "15": "macOS Catalina 10.15",
+ "7": "Mac OS X Lion 10.7",
+ "8": "OS X Mountain Lion 10.8",
+ "9": "OS X Mavericks 10.9"
+ },
+ "V11": {
+ "0": "macOS Big Sur 11.0"
+ },
+ "V12": {
+ "0": "macOS Monterey 12.0"
+ },
+ "V13": {
+ "0": "macOS Ventura 13.0"
+ },
+ "V14": {
+ "0": "macOS Sonoma 14.0"
+ }
+ },
+ "Windows": {
+ "V10Release": {
+ "release1607": "Windows 10 1607",
+ "release1703": "Windows 10 1703",
+ "release1709": "Windows 10 1709",
+ "release1803": "Windows 10 1803",
+ "release1809": "Windows 10 1809",
+ "release1903": "Windows 10 1903",
+ "release1909": "Windows 10 1909",
+ "release2004": "Windows 10 2004",
+ "release21H1": "Windows 10 21H1",
+ "release21H2": "Windows 10 21H2",
+ "release22H2": "Windows 10 22H2",
+ "release2H20": "Windows 10 20H2"
+ },
+ "V11Release": {
+ "release21H2": "Windows 11 21H2",
+ "release22H2": "Windows 11 22H2",
+ "release23H2": "Windows 11 23H2"
+ },
+ "v10": "Windows 10.0",
+ "v80": "Windows 8.0",
+ "v81": "Windows 8.1"
+ },
+ "WindowsPhone": {
+ "v80": "Windows Phone 8.0",
+ "v81": "Windows Phone 8.1"
+ }
+ },
+ "OfficeUpdateChannel": {
+ "current": "Current Channel",
+ "deferred": "Semi-Annual Enterprise Channel",
+ "firstReleaseCurrent": "Current Channel (Preview)",
+ "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
+ "monthlyEnterprise": "Monthly Enterprise Channel",
+ "placeHolder": "Select one"
+ },
+ "TableHeaders": {
+ "activity": "Activity",
+ "activityName": "Activity name",
+ "actor": "Initiated by (actor)",
+ "actorType": "Actor type",
+ "app": "App",
+ "appName": "App name",
+ "applicationName": "Application name",
+ "approvalType": "Approval method",
+ "assignedGroups": "Group",
+ "assignment": "Assignment",
+ "assignmentStatus": "Assigned",
+ "assignments": "Assignments",
+ "attributeName": "Attribute name",
+ "attributeType": "Attribute type",
+ "bundleId": "Bundle-Id",
+ "category": "Category",
+ "complianceGracePeriodExpiration": "Compliance grace period expiration",
+ "configurationType": "Profile type",
+ "conflictingPolicy": "Conflicting Policies",
+ "createdDate": "Created date",
+ "currentOs": "Current OS",
+ "date": "Date",
+ "dateRange": "Date range",
+ "deployed": "Deployed",
+ "description": "Description",
+ "device": "Device",
+ "deviceId": "Device ID",
+ "deviceName": "Device name",
+ "deviceOrApplicationName": "Device or application name",
+ "deviceReporting": "Devices reporting",
+ "diagnosticCode": "Diagnostic Code",
+ "diagnosticText": "Diagnostic Text",
+ "diagnostics": "Diagnostics",
+ "displayName": "Display name",
+ "driversToReview": "Drivers to review",
+ "eSIMActivationStatus": "Activation status",
+ "eSIMCellularStatus": "Cellular status",
+ "eSIMICCID": "ICCID",
+ "eSIMPoolName": "Cellular subscription",
+ "eSIMState": "eSIM state",
+ "eSIMTokenAmount": "Total eSIM activation codes",
+ "enabled": "Enabled",
+ "enabledPlatforms": "Enabled Platforms",
+ "encryptionReadiness": "Encryption Readiness",
+ "encryptionStatus": "Encryption Status",
+ "endTime": "End time",
+ "enrollment": "Enrollment",
+ "enrollmentAttempt": "Enrollment start",
+ "eventDateTime": "Timestamp",
+ "eventIdentifier": "Event ID",
+ "eventLevel": "Level",
+ "excluded": "Excluded",
+ "failure": "Failure",
+ "featureUpdateDeferral": "Feature Deferral",
+ "featureUpdateVersion": "Feature Update Version",
+ "featureUpdatesPaused": "Feature (Paused)",
+ "featureUpdatesStatus": "Feature",
+ "from": "From",
+ "groups": "Groups",
+ "groupsSelected": "Groups Selected",
+ "installationStatus": "Installation Status",
+ "issueId": "Issue id",
+ "lastCheckinTime": "Last Check-in Time",
+ "lastModified": "Last modified",
+ "lastScanTime": "Last Scan Time",
+ "lastSuccessfulSync": "Last Successful Sync",
+ "lastUpdated": "Last Updated",
+ "location": "Location",
+ "loggedInUser": "Logged in user",
+ "message": "Message",
+ "model": "Model",
+ "mtdConnector": "MTD Connector",
+ "name": "Profile name",
+ "oSVersion": "OS Version",
+ "operationType": "Operation type",
+ "os": "OS",
+ "packageName": "Package name",
+ "partnerName": "Partner",
+ "partnerStatus": "Partner status",
+ "permission": "Permission",
+ "platform": "Platform",
+ "policies": "Policies",
+ "policy": "Policy",
+ "policyType": "Policy type",
+ "preventedUpdateDays": "Restricted days",
+ "priority": "Priority",
+ "profiles": "Profiles",
+ "publicAddress": "Public address",
+ "publisher": "Publisher",
+ "qualityUpdateDeferral": "Quality Deferral",
+ "qualityUpdateRelease": "Quality Update Release",
+ "qualityUpdateVersion": "Quality Update Version",
+ "qualityUpdatesPaused": "Quality (Paused)",
+ "qualityUpdatesStatus": "Quality",
+ "reason": "Reason",
+ "resource": "Resource",
+ "roleName": "Name",
+ "roles": "Roles",
+ "scopeGroups": "Scope groups",
+ "scopeSize": "Assigned Scope Groups",
+ "scopeTags": "Scope tags",
+ "scriptName": "Script name",
+ "scriptType": "Script type",
+ "servicingOption": "Servicing channel",
+ "setting": "Setting",
+ "settings": "Settings",
+ "siteName": "Site name",
+ "source": "Source",
+ "sourceProfile": "Source Profile",
+ "startTime": "Start time",
+ "state": "State",
+ "stateDetails": "State details",
+ "status": "Status",
+ "subject": "Subject",
+ "support": "Support",
+ "supportEndDate": "Support End Date",
+ "tPMVersion": "TPM Version",
+ "target": "Target",
+ "timeWindows": "Time windows",
+ "timeZone": "Time zone",
+ "type": "Type",
+ "updateScheduleType": "Schedule type",
+ "updateStatus": "Update Status",
+ "user": "User",
+ "userPrincipalName": "User principal name",
+ "users": "Users",
+ "usersExcluded": "Users excluded",
+ "usersTargeted": "Users targeted",
+ "value": "Value",
+ "includedGroups": "Included Groups",
+ "excludedGroups": "Excluded Groups",
+ "licenseType": "License type"
+ },
+ "Inputs": {
+ "accountDomain": "Account domain",
+ "accountDomainHint": "e.g. contosodomain",
+ "accountDomainInfoBalloon": "Specify the user’s account domain.",
+ "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
+ "allowContactSetting": "Allow user to change contact setting",
+ "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
+ "allowUserChange": "Allow user to change setting",
+ "androidPackageNamePreset": "com.microsoft.word",
+ "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
+ "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
+ "appInstallContext": "App install context",
+ "appUrlLabel": "Appstore URL",
+ "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
+ "applicableDeviceType": "Applicable device type",
+ "assignmentActionLabel": "Mode",
+ "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
+ "authenticationMetod": "Authentication method",
+ "authenticationType": "Authentication type",
+ "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
+ "availableLicenseCount": "Available licenses",
+ "basicAuth": "Basic authentication",
+ "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
+ "bookNameLabel": "Book name",
+ "bundleDescriptionHint": "Enter a description that describes the apps included.",
+ "calendar": "Calendar",
+ "categoryLabel": "Category",
+ "categoryNameLabel": "Default name",
+ "certProfileType": "Certificate profile type",
+ "certificate": "Certificate",
+ "certificates": "Certificates",
+ "commandLineLabel": "Command-line arguments",
+ "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
+ "configurationSettingsFormatLabel": "Configuration settings format",
+ "configurationSettingsLabel": "Settings format",
+ "contactSync": "Save Contacts",
+ "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
+ "contacts": "Contacts",
+ "createdDateTime": "Created",
+ "defaultCategoryHint": "Default categories cannot be changed",
+ "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
+ "descriptionGenericLabel": "Description",
+ "descriptionHint": "Enter a description...",
+ "descriptionLabel": "Description",
+ "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
+ "developerLabel": "Developer",
+ "developerSizeHint": "The maximum length of the developer name is 256 characters.",
+ "disable": "Disable",
+ "disabled": "Disabled",
+ "displayNameLabel": "Name",
+ "displayVersionHint": "Enter the app version",
+ "displayVersionLabel": "App Version",
+ "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
+ "eBookCategoryNameLabel": "Default name",
+ "emailAccount": "Email account name",
+ "emailAccountHint": "e.g. Corporate Email",
+ "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
+ "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
+ "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
+ "emailServer": "Email Server",
+ "emailServerHint": "e.g. mail.contoso.com",
+ "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
+ "enable": "Enable",
+ "enableSMime": "Enable S/MIME",
+ "enabled": "Enabled",
+ "encryptAllEmails": "Encrypt all emails",
+ "encryptionCertificates": "Encryption certificates",
+ "endUserNotifications": "End-user notifications",
+ "enrollmentTypeLabel": "Device enrollment type",
+ "externalRecipients": "External recipients MailTip",
+ "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
+ "focusedInbox": "Focused Inbox",
+ "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
+ "fullScreenEnabledLabel": "Full screen",
+ "gmailNineAmountOfEmail": "Amount of email to synchronize",
+ "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
+ "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
+ "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
+ "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
+ "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
+ "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
+ "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
+ "ignoreManifestScope": "Ignore manifest scope",
+ "ignoreVersionDetection": "Ignore app version",
+ "informationUrlLabel": "Information URL",
+ "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
+ "installAsManaged": "Install as managed",
+ "installationSourceLabel": "App type",
+ "installerTypeInfoBalloon": "The installer type of the application package.",
+ "installerTypeLabel": "Installer Type",
+ "isFeatured": "Show this as a featured app in the Company Portal",
+ "isMAMEnabledToggleLabel": "Yes",
+ "lastModifiedDateTime": "Last updated Time",
+ "ldapUrl": "LDAP URL",
+ "licensingType": "Supports device context assignment",
+ "microsoft": "Microsoft",
+ "minimumOperationSystem": "Minimum operating system",
+ "modernAuth": "Modern authentication",
+ "nameHint": "Enter a name",
+ "nameLabel": "Name",
+ "nameSizeHint": "The maximum length of the name is 512 characters.",
+ "notConfigured": "Not configured",
+ "notesLabel": "Notes",
+ "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
+ "notificationType": "Notification type",
+ "oneDay": "One Day",
+ "oneMonth": "One Month",
+ "oneWeek": "One Week",
+ "outlookSMimeSettings": "Outlook S/MIME settings",
+ "ownerLabel": "Owner",
+ "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
+ "packageIdLabel": "Package Identifier",
+ "packageNameLabel": "Package name",
+ "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
+ "platformLabel": "Platform",
+ "policyDescriptionLabel": "Description",
+ "policyNameLabel": "Name",
+ "preComposedIconEnabled": "Precomposed",
+ "primarySMTPAddress": "Primary SMTP Address",
+ "privacyUrlLabel": "Privacy URL",
+ "publisherHint": "Enter a publisher name",
+ "publisherLabel": "Publisher",
+ "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
+ "require": "Require",
+ "requireBiometrics": "Require Biometrics to access app",
+ "sAMAccountName": "sAMAccountName",
+ "scopeTagsRequired": "At least one scope tag is required",
+ "searchAppLabel": "Select app",
+ "searchAppLinkText": "Search the App Store",
+ "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
+ "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
+ "selectAAD": "Select a Microsoft Entra attribute",
+ "selectAppFileLabel": "Select file",
+ "selectAppFileLinkText": "Select app package file",
+ "selectAppFileToUpdateLabel": "Select file to update",
+ "selectAuthMethod": "Select an authentication method",
+ "selectAuthType": "Select an authentication type",
+ "selectCatalogAppLabel": "Select app",
+ "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
+ "selectCertificate": "Select a certificate",
+ "signAllEmails": "Sign all emails",
+ "signingCertificates": "Signing certificates",
+ "ssl": "SSL",
+ "suiteDescriptionLabel": "Suite Description",
+ "suiteNameLabel": "Suite Name",
+ "targetApplicationBundleIdentifier": "Target application bundle identifier",
+ "targetedPlatformsLabel": "Targeted platform",
+ "tasks": "Tasks",
+ "threeDays": "Three Days",
+ "totalLicenseCount": "Total licenses",
+ "twoWeeks": "Two Weeks",
+ "unifiedAssignmentsLabel": "Assign to:",
+ "unlimited": "Unlimited",
+ "urlHint": "Enter a valid url",
+ "useManagedBrowserHint": "Android and iOS only. Learn more",
+ "useManagedBrowserLabel": "Require a managed browser to open this link",
+ "userPrinicipalName": "User Principal Name",
+ "username": "Username",
+ "usernameAttribute": "Username attribute from Microsoft Entra ID",
+ "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
+ "usernamePassword": "Username and password",
+ "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
+ "webAppUrlLabel": "App URL",
+ "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
+ "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
+ "xMLDataEntered": "XML Data Entered",
+ "xmlFormatInvalid": "XML policy format is invalid.",
+ "xmlTooLarge": "Input size must be less than 1 MB."
+ },
+ "CoManagementAuthority": {
+ "Confirmation": {
+ "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
+ "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
+ },
+ "Grid": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
+ "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
+ "label": "Co-management authority"
+ },
+ "Header": {
+ "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
+ },
+ "Main": {
+ "title": "Co-management Authority"
+ },
+ "MessageSaved": {
+ "body": "Co-management authority policy created."
+ },
+ "Notification": {
+ "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
+ "created": "This Co-management authority policy has not been assigned to any users.",
+ "creating": "Creating Co-management authority policy",
+ "creatingMessage": "Creating {0} Co-management authority policy",
+ "deleteError": "An error occurred while deleting Co-management authority policy",
+ "deleted": "Co-management authority policy deleted.",
+ "deletedMessage": "{0} Co-management authority policy is deleted.",
+ "deleting": "Deleting Co-management Authority policy",
+ "deletingMessage": "Deleting {0} Co-management Authority policy",
+ "fetchError": "An error occurred while displaying Co-management authority policies",
+ "saved": "Co-management Authority saved.",
+ "savedMessage": "{0} Co-management Authority policy successfully saved.",
+ "saving": "Saving Co-management authority",
+ "savingMessage": "Saving {0} Co-management authority policy"
+ },
+ "Priority": {
+ "saveError": "An error occurred while saving Co-management authority priorities",
+ "saved": "Co-management authority priorities were successfully saved."
+ },
+ "ReloadNotification": {
+ "description": "Reload the Co-management authority policy to try again.",
+ "title": "Reload the Co-management authority blade"
+ },
+ "advancedProperty": "Advanced",
+ "commandLineArgs": "Client installation command line arguments.",
+ "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
+ "enterArgument": "Enter argument",
+ "installAgent": "Automatically install Configuration Manager agent.",
+ "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
+ "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
+ "pageDescription": "Co-management authority profiles",
+ "pageSetting": "Co-management authority Setting",
+ "pageTitle": "Co-management authority",
+ "settingDescription": "The co-management settings determine who owns the workloads."
+ },
+ "AzureIAMCommon": {
+ "Recommended": "Recommended",
+ "CountryNames": {
+ "countryNameNR": "Nauru",
+ "countryNameBH": "Bahrain",
+ "countryNameZA": "South Africa",
+ "countryNameJO": "Jordan",
+ "countryNameSD": "Sudan",
+ "countryNameNU": "Niue",
+ "countryNameCZ": "Czech Republic",
+ "countryNameLT": "Lithuania",
+ "countryNameTK": "Tokelau",
+ "countryNameEC": "Ecuador",
+ "countryNameVU": "Vanuatu",
+ "countryNameUG": "Uganda",
+ "countryNameLI": "Liechtenstein",
+ "countryNameHK": "Hong Kong SAR",
+ "countryNameGH": "Ghana",
+ "countryNameSA": "Saudi Arabia",
+ "countryNamePG": "Papua New Guinea",
+ "countryNameBW": "Botswana",
+ "countryNameDG": "Diego Garcia",
+ "countryNameIN": "India",
+ "countryNameHN": "Honduras",
+ "countryNameRO": "Romania",
+ "countryNameKZ": "Kazakhstan",
+ "countryNameLC": "Saint Lucia",
+ "countryNameGE": "Georgia",
+ "countryNameTT": "Trinidad and Tobago",
+ "countryNameMP": "Northern Mariana Islands",
+ "countryNameMV": "Maldives",
+ "countryNameFI": "Finland",
+ "countryNameNO": "Norway",
+ "countryNameEE": "Estonia",
+ "countryNameVE": "Venezuela",
+ "countryNameUZ": "Uzbekistan",
+ "countryNameME": "Montenegro",
+ "countryNameTJ": "Tajikistan",
+ "countryNameAW": "Aruba",
+ "countryNameFR": "France",
+ "countryNameOM": "Oman",
+ "countryNameAO": "Angola",
+ "countryNameIT": "Italy",
+ "countryNameAZ": "Azerbaijan",
+ "countryNameKG": "Kyrgyzstan",
+ "countryNameWF": "Wallis and Futuna",
+ "countryNameTL": "Timor-Leste",
+ "countryNameFK": "Falkland Islands (Islas Malvinas)",
+ "countryNameGY": "Guyana",
+ "countryNameSS": "South Sudan",
+ "countryNameMM": "Myanmar",
+ "countryNameHT": "Haiti",
+ "countryNameSY": "Syria",
+ "countryNameMD": "Moldova",
+ "countryNameVC": "Saint Vincent and the Grenadines",
+ "countryNameID": "Indonesia",
+ "countryNameRE": "Reunion",
+ "countryNameER": "Eritrea",
+ "countryNameMK": "North Macedonia",
+ "countryNameTG": "Togo",
+ "countryNamePF": "French Polynesia",
+ "countryNameKY": "Cayman Islands",
+ "countryNameIO": "British Indian Ocean Territory",
+ "countryNameRU": "Russia",
+ "countryNameMA": "Morocco",
+ "countryNameAU": "Australia",
+ "countryNameBO": "Bolivia",
+ "countryNameVA": "Holy See (Vatican City State)",
+ "countryNameVG": "Virgin Islands, British",
+ "countryNameFM": "Micronesia",
+ "countryNameAQ": "Antarctica",
+ "countryNameZM": "Zambia",
+ "countryNameBR": "Brazil",
+ "countryNameIS": "Iceland",
+ "countryNamePE": "Peru",
+ "countryNameBG": "Bulgaria",
+ "countryNamePR": "Puerto Rico",
+ "countryNameGI": "Gibraltar",
+ "countryNameBS": "Bahamas, The",
+ "countryNameJE": "Jersey",
+ "countryNameMO": "Macao SAR",
+ "countryNameRW": "Rwanda",
+ "countryNameAS": "American Samoa",
+ "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
+ "countryNameMF": "Saint Martin",
+ "countryNameTM": "Turkmenistan",
+ "countryNameML": "Mali",
+ "countryNameTO": "Tonga",
+ "countryNameNC": "New Caledonia",
+ "countryNameAC": "Ascension Island",
+ "countryNameBN": "Brunei",
+ "countryNameBD": "Bangladesh",
+ "countryNameMW": "Malawi",
+ "countryNameGM": "Gambia",
+ "countryNameGA": "Gabon",
+ "countryNameCA": "Canada",
+ "countryNameSH": "Saint Helena",
+ "countryNameYT": "Mayotte",
+ "countryNameMN": "Mongolia",
+ "countryNamePA": "Panama",
+ "countryNameCM": "Cameroon",
+ "countryNameNE": "Niger",
+ "countryNameCW": "Curaçao",
+ "countryNameJP": "Japan",
+ "countryNameCY": "Cyprus",
+ "countryNameCD": "Democratic Republic of Congo",
+ "countryNameTN": "Tunisia",
+ "countryNameTR": "Türkiye",
+ "countryNameWS": "Samoa",
+ "countryNameSE": "Sweden",
+ "countryNameXK": "Kosovo",
+ "countryNameKH": "Cambodia",
+ "countryNamePL": "Poland",
+ "countryNameDZ": "Algeria",
+ "countryNameLR": "Liberia",
+ "countryNameSO": "Somalia",
+ "countryNameDM": "Dominica",
+ "countryNameEG": "Egypt",
+ "countryNameGF": "French Guiana",
+ "countryNameNZ": "New Zealand",
+ "countryNamePS": "Palestinian Authority",
+ "countryNameIL": "Israel",
+ "countryNameSL": "Sierra Leone",
+ "countryNameGR": "Greece",
+ "countryNameNG": "Nigeria",
+ "countryNameMR": "Mauritania",
+ "countryNameVI": "Virgin Islands, U.S.",
+ "countryNameGQ": "Equatorial Guinea",
+ "countryNameMX": "Mexico",
+ "countryNameDJ": "Djibouti",
+ "countryNameGN": "Guinea",
+ "countryNameCN": "China",
+ "countryNameMZ": "Mozambique",
+ "countryNameBV": "Bouvet Island",
+ "countryNameNF": "Norfolk Island",
+ "countryNameTZ": "Tanzania",
+ "countryNameAI": "Anguilla",
+ "countryNameGS": "South Georgia and the South Sandwich Islands",
+ "countryNameRS": "Serbia",
+ "countryNameCC": "Cocos (Keeling) Islands",
+ "countryNameNA": "Namibia",
+ "countryNameDE": "Germany",
+ "countryNameCG": "Republic of Congo",
+ "countryNameKW": "Kuwait",
+ "countryNameMH": "Marshall Islands",
+ "countryNameVN": "Vietnam",
+ "countryNameBY": "Belarus",
+ "countryNameMY": "Malaysia",
+ "countryNameST": "São Tomé and Príncipe",
+ "countryNameLS": "Lesotho",
+ "countryNameBI": "Burundi",
+ "countryNameTD": "Chad",
+ "countryNameCX": "Christmas Island",
+ "countryNameIR": "Iran",
+ "countryNameTV": "Tuvalu",
+ "countryNameGW": "Guinea-Bissau",
+ "countryNameUA": "Ukraine",
+ "countryNameCU": "Cuba",
+ "countryNameCO": "Colombia",
+ "countryNameNI": "Nicaragua",
+ "countryNameHR": "Croatia",
+ "countryNameSC": "Seychelles",
+ "countryNameNL": "Netherlands",
+ "countryNameUM": "US Minor Outlying Islands",
+ "countryNameIM": "Isle of Man",
+ "countryNameFJ": "Fiji",
+ "countryNameSR": "Suriname",
+ "countryNameGT": "Guatemala",
+ "countryNameSM": "San Marino",
+ "countryNameLA": "Laos",
+ "countryNameGB": "United Kingdom",
+ "countryNameBB": "Barbados",
+ "countryNameSI": "Slovenia",
+ "countryNameAM": "Armenia",
+ "countryNameAR": "Argentina",
+ "countryNamePM": "Saint Pierre and Miquelon",
+ "countryNameTF": "French Southern and Antarctic Lands",
+ "countryNameDO": "Dominican Republic",
+ "countryNameZW": "Zimbabwe",
+ "countryNameMQ": "Martinique",
+ "countryNamePT": "Portugal",
+ "countryNameCF": "Central African Republic",
+ "countryNameBE": "Belgium",
+ "countryNameKM": "Comoros",
+ "countryNameLY": "Libya",
+ "countryNameIE": "Ireland",
+ "countryNameKP": "North Korea",
+ "countryNameGG": "Guernsey",
+ "countryNameSK": "Slovakia",
+ "countryNameTC": "Turks and Caicos Islands",
+ "countryNameNP": "Nepal",
+ "countryNameBF": "Burkina Faso",
+ "countryNameYE": "Yemen",
+ "countryNameBA": "Bosnia and Herzegovina",
+ "countryNameGP": "Guadeloupe",
+ "countryNameMS": "Montserrat",
+ "countryNameCL": "Chile",
+ "countryNameIQ": "Iraq",
+ "countryNameSJ": "Svalbard and Jan Mayen Island",
+ "countryNameAX": "Åland Islands",
+ "countryNameKE": "Kenya",
+ "countryNameGU": "Guam",
+ "countryNameBM": "Bermuda",
+ "countryNameFO": "Faroe Islands",
+ "countryNameBL": "Saint Barthélemy",
+ "countryNameLB": "Lebanon",
+ "countryNameJM": "Jamaica",
+ "countryNameAF": "Afghanistan",
+ "countryNameES": "Spain",
+ "countryNameMC": "Monaco",
+ "countryNameSG": "Singapore",
+ "countryNameAL": "Albania",
+ "countryNameSN": "Senegal",
+ "countryNameSZ": "Eswatini",
+ "countryNameBZ": "Belize",
+ "countryNameCI": "Côte d’Ivoire",
+ "countryNameTW": "Taiwan",
+ "countryNameUY": "Uruguay",
+ "countryNameCK": "Cook Islands",
+ "countryNameTH": "Thailand",
+ "countryNameHM": "Heard Island and McDonald Islands",
+ "countryNameGD": "Grenada",
+ "countryNameUS": "United States",
+ "countryNameAT": "Austria",
+ "countryNameKR": "Korea, Republic of",
+ "countryNamePK": "Pakistan",
+ "countryNameDK": "Denmark",
+ "countryNameSV": "El Salvador",
+ "countryNamePW": "Palau",
+ "countryNameET": "Ethiopia",
+ "countryNameMG": "Madagascar",
+ "countryNameCR": "Costa Rica",
+ "countryNameLU": "Luxembourg",
+ "countryNameQA": "Qatar",
+ "countryNameBT": "Bhutan",
+ "countryNameSB": "Solomon Islands",
+ "countryNameAE": "United Arab Emirates",
+ "countryNameAD": "Andorra",
+ "countryNameCV": "Cabo Verde",
+ "countryNameAG": "Antigua and Barbuda",
+ "countryNameMU": "Mauritius",
+ "countryNameHU": "Hungary",
+ "countryNameSX": "Sint Maarten",
+ "countryNameCH": "Switzerland",
+ "countryNamePN": "Pitcairn Islands",
+ "countryNameGL": "Greenland",
+ "countryNamePH": "Philippines",
+ "countryNameMT": "Malta",
+ "countryNameKN": "Saint Kitts and Nevis",
+ "countryNameLK": "Sri Lanka",
+ "countryNameKI": "Kiribati",
+ "countryNameBJ": "Benin",
+ "countryNameLV": "Latvia",
+ "countryNamePY": "Paraguay"
+ }
+ },
+ "PolicySelection": {
+ "Grid": {
+ "Column": {
+ "author": "Author",
+ "template": "Template name"
+ },
+ "Row": {
+ "ariaLabel": "row {0} of {1} column {2}"
+ }
+ },
+ "InventoryCatalog": {
+ "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
+ },
+ "SettingsCatalog": {
+ "subtitle": "Start from scratch and select settings you want from the library of available settings",
+ "title": "Settings catalog"
+ },
+ "Templates": {
+ "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
+ "title": "Templates"
+ },
+ "noData": "No policy templates found"
+ },
+ "PolicyType": {
+ "EdgeSmartScreenSettings": {
+ "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "EndpointDetectionandResponse": {
+ "mDE": "Endpoint detection and response"
+ },
+ "EndpointSecurityTemplate": {
+ "aSRAppBrowserSecurity": "App and browser isolation",
+ "aSRApplicationControl": "Application control",
+ "aSRAttackSurfaceReduction": "Attack surface reduction rules",
+ "aSRDeviceControl": "Device control",
+ "aSRExploitProtection": "Exploit protection",
+ "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
+ "aVExclusions": "Microsoft Defender Antivirus exclusions",
+ "antivirus": "Microsoft Defender Antivirus",
+ "cloudPC": "Windows 365 Security Baseline",
+ "default": "Endpoint Security",
+ "defenderTest": "Microsoft Defender for Endpoint demo",
+ "diskEncryption": "BitLocker",
+ "eDR": "Endpoint detection and response",
+ "edgeSecurityBaseline": "Microsoft Edge baseline",
+ "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
+ "editionUpgradeConfiguration": "Edition upgrade and mode switch",
+ "firewall": "Windows Firewall",
+ "firewallRules": "Windows Firewall rules",
+ "identityProtection": "Account protection",
+ "identityProtectionPreview": "Account protection (preview)",
+ "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
+ "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
+ "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
+ "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
+ "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
+ "macOSAntivirus": "Antivirus",
+ "macOSDiskEncryption": "FileVault",
+ "macOSFirewall": "macOS firewall",
+ "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
+ "office365Baseline": "Microsoft Office O365 baseline",
+ "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
+ "securityBaselines": "Security Baselines",
+ "test": "Test Template",
+ "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
+ "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
+ "windowsSecurityExperience": "Windows Security experience"
+ },
+ "Firewall": {
+ "mDE": "Windows Firewall"
+ },
+ "FirewallRules": {
+ "mDE": "Windows Firewall Rules"
+ },
+ "OneDriveKnownFolderMove": {
+ "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
+ },
+ "accountProtection": "Account Protection",
+ "administrativeTemplates": "Administrative Templates",
+ "androidCompliancePolicy": "Android compliance policy",
+ "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
+ "applicationControl": "App Control for Business",
+ "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
+ "bitlocker": "BitLocker",
+ "custom": "Custom",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedPersonalIdentityVerificationCredential": "Derived credential",
+ "deviceControl": "Device Control",
+ "deviceFeatures": "Device features",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceLock": "Device Lock",
+ "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
+ "deviceRestrictions": "Device restrictions",
+ "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
+ "domainJoinPreview": "Domain Join",
+ "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
+ "education": "Education",
+ "email": "Email",
+ "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
+ "endpointProtection": "Endpoint protection",
+ "expeditedCheckin": "Mobile device management configuration",
+ "exploitProtection": "Exploit Protection",
+ "extensions": "Extensions",
+ "hardwareConfigurations": "BIOS Configurations and other settings",
+ "identityProtection": "Identity protection",
+ "iosCompliancePolicy": "iOS compliance policy",
+ "kiosk": "Kiosk",
+ "localUsersAndGroups": "Local user group membership",
+ "macCompliancePolicy": "Mac compliance policy",
+ "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
+ "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
+ "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
+ "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
+ "microsoftDefenderFirewallRules": "Windows Firewall Rules",
+ "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
+ "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
+ "mxProfileZebraOnly": "MX profile (Zebra only)",
+ "networkBoundary": "Network boundary",
+ "oemConfig": "OEMConfig",
+ "overrideGroupPolicy": "Override Group Policy",
+ "pkcsCertificate": "PKCS certificate",
+ "pkcsImportedCertificate": "PKCS imported certificate",
+ "preferenceFile": "Preference file",
+ "presets": "Presets",
+ "scepCertificate": "SCEP certificate",
+ "secureAssessmentEducation": "Secure assessment (Education)",
+ "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
+ "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
+ "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
+ "settingsCatalog": "Settings Catalog",
+ "sharedMultiUserDevice": "Shared multi-user device",
+ "softwareUpdates": "Software Updates",
+ "trustedCertificate": "Trusted certificate",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "vpn": "VPN",
+ "wiFi": "Wi-Fi",
+ "wiFiImport": "Wi-Fi import",
+ "windows10CompliancePolicy": "Windows 10/11 compliance policy",
+ "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
+ "windows10XScep": "SCEP certificate - TEST",
+ "windows10XTrustedCertificate": "Trusted certificate - TEST",
+ "windows10XVPN": "VPN - TEST",
+ "windows10XWifi": "WIFI - TEST",
+ "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
+ "windows365SecurityBaseline": "Windows 365 Security Baseline",
+ "windows8CompliancePolicy": "Windows 8 compliance policy",
+ "windowsHealthMonitoring": "Windows health monitoring",
+ "windowsInformationProtection": "Windows Information Protection",
+ "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
+ "windowsUpdateforBusiness": "Windows Update for Business",
+ "wiredNetwork": "Wired network",
+ "workProfile": "Personally-owned work profile"
+ },
+ "WindowsUpdateRolloutOptions": {
+ "gradualRollout": "Make update available gradually",
+ "immediateStart": "Make update available as soon as possible",
+ "startDateOnly": "Make update available on a specific date"
+ },
+ "AndroidForWorkAppPermissions": {
+ "Action": {
+ "autoDeny": "Auto deny",
+ "autoGrant": "Auto grant",
+ "prompt": "Prompt"
+ },
+ "Permissions": {
+ "accessCoarseLocation": "Location access (coarse)",
+ "accessFineLocation": "Location access (fine)",
+ "addVoicemail": "Add voicemail",
+ "bodySensors": "Allow body sensor data",
+ "bodySensorsBackground": "Allow background body sensor data",
+ "callPhone": "Make phone calls",
+ "camera": "Camera",
+ "getAccounts": "Get accounts",
+ "nearbyDevices": "Nearby Devices",
+ "nearbyWifiDevices": "Nearby Wifi Devices",
+ "postNotifications": "Post notifications",
+ "processOutgoingCalls": "Process outgoing calls",
+ "readCalendar": "Calendar (read)",
+ "readCallLog": "Call log (read)",
+ "readContacts": "Contacts (read)",
+ "readExternalStorage": "External storage (read)",
+ "readMediaAudio": "Media Audio (read)",
+ "readMediaImages": "Media Images (read)",
+ "readMediaVideo": "Media Video (read)",
+ "readPhoneState": "Phone state (read)",
+ "readSMS": "SMS (read)",
+ "receiveMMS": "MMS (receive)",
+ "receiveSMS": "SMS (receive)",
+ "receiveWAPPush": "WAP push messages (receive)",
+ "recordAudio": "Record audio",
+ "sendSMS": "SMS (send)",
+ "useSIP": "Use SIP service",
+ "writeCalendar": "Calendar (write)",
+ "writeCallLog": "Call log (write)",
+ "writeContacts": "Contacts (write)",
+ "writeExternalStorage": "External storage (write)"
+ },
+ "RemoveDialog": {
+ "description": "Are you sure you want to remove the permission?",
+ "title": "Remove"
+ },
+ "TableHeader": {
+ "permission": "Permission",
+ "permissionGroup": "Permission group",
+ "permissionName": "Permission name",
+ "permissionState": "Permission state"
+ },
+ "addButtonLabel": "+Add",
+ "addPermissionTableDescription": "Specify permissions you want to override. If they are not chosen/specified explicitly, then the default behavior will apply.",
+ "addPermissionsTitle": "Add permissions",
+ "learnMoreLink": "https://go.microsoft.com/fwlink/?linkid=850320",
+ "learnMoreText": "Learn more about Android runtime permissions",
+ "permissionTableDescription": "Permissions granted here will override the “Default app permissions” policy for the selected apps.",
+ "permissionsTitle": "Permissions"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "OfficeApplicationType": {
+ "access": "Access",
+ "bing": "Microsoft Search as default",
+ "excel": "Excel",
+ "groove": "OneDrive (Groove)",
+ "lync": "Skype for Business",
+ "oneDrive": "OneDrive Desktop",
+ "oneNote": "OneNote",
+ "outlook": "Outlook",
+ "powerPoint": "PowerPoint",
+ "publisher": "Publisher",
+ "teams": "Teams",
+ "word": "Word"
+ },
+ "Win32Requirements": {
+ "AdditionalRequirements": {
+ "File": {
+ "fileOrFolderToolTip": "The file or folder as the selected requirement.",
+ "pathToolTip": "The complete path of the file or folder to detect.",
+ "property": "Property",
+ "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "GridColumns": {
+ "pathOrScript": "Path/Script",
+ "type": "Type"
+ },
+ "Registry": {
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the comparison.",
+ "registryRequirement": "Registry key requirement",
+ "registryRequirementTooltip": "Select the registry key requirement comparison.",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the required registry value."
+ },
+ "RequirementTypeOptions": {
+ "fileType": "File",
+ "registry": "Registry",
+ "script": "Script"
+ },
+ "Script": {
+ "RequirementMethodOptions": {
+ "boolean": "Boolean",
+ "dateTime": "Date and Time",
+ "float": "Floating Point",
+ "integer": "Integer",
+ "string": "String",
+ "version": "Version"
+ },
+ "duplicateName": "Script name {0} has already been used. Please enter a different name.",
+ "enforceSignatureCheck": "Enforce script signature check",
+ "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
+ "loggedOnCredentials": "Run this script using the logged on credentials",
+ "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
+ "operatorTooltip": "Select the operator for the requirement comparison.",
+ "requirementMethod": "Select output data type",
+ "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
+ "scriptName": "Script name",
+ "value": "Value",
+ "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ },
+ "bladeTitle": "Add a Requirement rule",
+ "createRequirementHeader": "Create a requirement.",
+ "header": "Configure additional requirement rules",
+ "label": "Additional requirement rules",
+ "noRequirementsSelectedPlaceholder": "No requirements are specified.",
+ "requirementType": "Requirement type",
+ "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
+ },
+ "architectures": "Operating system architecture",
+ "architecturesTooltip": "Choose the architectures needed to install the app.",
+ "bladeTitle": "Requirements",
+ "diskSpace": "Disk space required (MB)",
+ "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
+ "header": "Specify the requirements that devices must meet before the app is installed:",
+ "maximumTextFieldValue": "The value must be at most {0}.",
+ "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
+ "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
+ "minimumLogicalProcessors": "Minimum number of logical processors required",
+ "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
+ "minimumOperatingSystem": "Minimum operating system",
+ "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
+ "minumumTextFieldValue": "The value must be at least {0}.",
+ "physicalMemory": "Physical memory required (MB)",
+ "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
+ "selectorLabel": "Requirements",
+ "validNumber": "Please enter a valid number."
+ },
+ "AppResources": {
+ "AppSettingsUx": {
+ "assignmentFilterColumnHeader": "Filter",
+ "assignmentFilterTypeColumnHeader": "Filter mode",
+ "assignmentToast": "End user notifications",
+ "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
+ "autoUpdate": "Auto-update",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
+ "groupTableHeader": "Group",
+ "installContextLabel": "Install Context",
+ "isRemovable": "Install as removable",
+ "licenseTypeLabel": "License type",
+ "modeTableHeader": "Group mode",
+ "policySet": "Policy Set",
+ "preventAutoAppUpdate": "Prevent automatic app updates",
+ "preventManagedAppBackup": "Prevent iCloud app backup",
+ "restartGracePeriodHeader": "Restart grace period",
+ "startTimeColumnLabel": "Availability",
+ "tracks": "Tracks",
+ "uninstallOnRemoval": "Uninstall on device removal",
+ "updateMode": "Update Priority",
+ "vPN": "VPN"
+ },
+ "AppType": {
+ "aADWebApp": "AAD web app",
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "macOS Office Suite",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeAddIn": "Office add-in",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "sharePointApp": "SharePoint app",
+ "teamsApp": "Teams app",
+ "webApp": "Web link",
+ "win32CatalogApp": "Windows catalog app (Win32)",
+ "winGetPublicApp": "Windows Package Manager Community Repository",
+ "winGetStoreApp": "Microsoft Store app (new)",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "AppTypePlatform": {
+ "android": "Android",
+ "ios": "iOS",
+ "macOs": "macOS",
+ "web": "Web",
+ "windows": "Windows"
+ },
+ "AssignmentAction": {
+ "exclude": "Excluded",
+ "include": "Included",
+ "includeAllDevicesVirtualGroup": "Included",
+ "includeAllUsersVirtualGroup": "Included"
+ },
+ "AssignmentToast": {
+ "hideAll": "Hide all toast notifications",
+ "showAll": "Show all toast notifications",
+ "showReboot": "Show toast notifications for computer restarts"
+ },
+ "AutoUpdateSupersededApps": {
+ "enabled": "Yes",
+ "notConfigured": "No"
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "DeviceRestartBehaviorOptions": {
+ "allow": "App install may force a device restart",
+ "basedOnReturnCode": "Determine behavior based on return codes",
+ "force": "Intune will force a mandatory device restart",
+ "suppress": "No specific action"
+ },
+ "FilterType": {
+ "exclude": "Exclude",
+ "include": "Include",
+ "none": "None"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "notApplicable": "Not applicable",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "SettingType": {
+ "assignmentType": "Assignment type",
+ "deviceLicensing": "License type",
+ "installContext": "Uninstall on device removal",
+ "toastSettings": "End user notifications",
+ "vpnConfiguration": "VPN"
+ },
+ "UpdateMode": {
+ "default": "Default",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ }
+ },
+ "Win32ReturnCodes": {
+ "CodeTypes": {
+ "failed": "Failed",
+ "hardReboot": "Hard reboot",
+ "retry": "Retry",
+ "softReboot": "Soft reboot",
+ "success": "Success"
+ },
+ "Columns": {
+ "codeType": "Code type",
+ "returnCode": "Return code"
+ },
+ "bladeTitle": "Return codes",
+ "gridAriaLabel": "Return codes",
+ "header": "Specify return codes to indicate post-installation behavior:",
+ "onAddAnnounceMessage": "Return code added item {0} of {1}",
+ "onDeleteSuccess": "Return code {0} deleted successfully",
+ "returnCodeAlreadyUsedValidation": "Return code is already used.",
+ "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
+ "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
+ "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
+ "selectorLabel": "Return codes"
+ },
+ "ApplicableDeviceType": {
+ "iPad": "iPad",
+ "iPhoneAndIPod": "iPhone and iPod"
+ },
+ "WipPolicySettings": {
+ "addNetworkBoundary": "Add network boundary",
+ "addNetworkBoundaryButton": "Add network boundary...",
+ "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
+ "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
+ "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
+ "boundaryType": "Boundary type",
+ "cloudResources": "Cloud resources",
+ "corporateIdentity": "Corporate identity",
+ "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
+ "editNetworkBoundary": "Edit network boundary",
+ "enrollmentState": "Enrollment state",
+ "iPv4Ranges": "IPv4 ranges",
+ "iPv6Ranges": "IPv6 ranges",
+ "internalProxyServers": "Internal proxy servers",
+ "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
+ "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
+ "mdmDiscoveryUrl": "MDM discovery URL",
+ "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
+ "minimumPinLength": "Set the minimum number of characters required for the PIN",
+ "name": "Name",
+ "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
+ "networkBoundary": "Network boundary",
+ "networkDomainNames": "Network domains",
+ "neutralResources": "Neutral resources",
+ "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
+ "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
+ "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
+ "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
+ "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
+ "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
+ "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
+ "protectedDomainNames": "Protected domains",
+ "proxyServers": "Proxy servers",
+ "requireAppPin": "Disable app PIN when device PIN is managed",
+ "requiredSettings": "Required settings",
+ "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
+ "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
+ "revokeOnUnenroll": "Revoke encryption keys on unenroll",
+ "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
+ "showWipIcon": "Show the enterprise data protection icon",
+ "type": "Type",
+ "useRmsForWip": "Use Azure RMS for WIP",
+ "value": "Value",
+ "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
+ "wipProtectionMode": "Windows Information Protection mode",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "NotificationMessage": {
+ "NotificationMessageTemplatesTab": {
+ "arabic": "Arabic",
+ "bulgarian": "Bulgarian",
+ "chineseSimplified": "Chinese (Simplified)",
+ "chineseTraditional": "Chinese (Traditional)",
+ "croatian": "Croatian",
+ "czech": "Czech",
+ "danish": "Danish",
+ "dutch": "Dutch",
+ "englishUK": "English (United Kingdom)",
+ "englishUS": "English (United States)",
+ "estonian": "Estonian",
+ "finnish": "Finnish",
+ "frenchCanada": "French (Canada)",
+ "frenchFrance": "French (France)",
+ "german": "German",
+ "greek": "Greek",
+ "hebrew": "Hebrew",
+ "hungarian": "Hungarian",
+ "italian": "Italian",
+ "japanese": "Japanese",
+ "korean": "Korean",
+ "latvian": "Latvian",
+ "lithuanian": "Lithuanian",
+ "norwegian": "Norwegian, Bokmål",
+ "polish": "Polish",
+ "portugueseBrazil": "Portuguese (Brazil)",
+ "portuguesePortugal": "Portuguese (Portugal)",
+ "romanian": "Romanian",
+ "russian": "Russian",
+ "serbian": "Serbian",
+ "slovak": "Slovak",
+ "slovenian": "Slovenian",
+ "spanishMexico": "Spanish (Mexico)",
+ "spanishSpain": "Spanish (Spain)",
+ "swedish": "Swedish",
+ "thai": "Thailand",
+ "turkish": "Turkish",
+ "ukrainian": "Ukrainian"
+ },
+ "Summary": {
+ "placeholder": "Select a notification message from the left to preview contents."
+ },
+ "companyContact": "Show contact information",
+ "companyLogo": "Show company logo",
+ "companyName": "Show company name",
+ "createEditDescription": "Create or edit notification message templates.",
+ "createMessage": "Create message",
+ "deviceDetails": "Show device details",
+ "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
+ "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
+ "editMessage": "Edit message",
+ "email": "email",
+ "emailFooterTitle": "Email Footer",
+ "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
+ "emailHeaderTitle": "Email Header",
+ "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
+ "emailInfoMoreText": "Configure Customization settings",
+ "formSubTitle": "Create or modify notification emails",
+ "headerFooterSettingsTab": "Header and footer settings",
+ "imgPreview": "Image Preview",
+ "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
+ "iwLink": "Show company portal website link",
+ "listEmpty": "No message templates.",
+ "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "listSubTitle": "List of notification message templates",
+ "listTitle": "Notification message templates",
+ "localizedNotificationMessageTemplates": "Localized notification message templates",
+ "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
+ "messageCapitalized": "Notification message template",
+ "messageLowercase": "notification message template",
+ "missingDefaultError": "Select a default template",
+ "notificationMessageTemplates": "Notification message templates",
+ "rowValidationError": "At least one message template is required",
+ "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
+ "tenantValueText": "Tenant Value",
+ "testEmailLabel": "Send preview email",
+ "localeLabel": "Locale",
+ "isDefaultLocale": "Is Default"
+ },
+ "WindowsEnrollment": {
+ "DevicePreparation": {
+ "description": "Configure devices for initial provisioning.",
+ "title": "Device preparation"
+ },
+ "EnrollmentSettings": {
+ "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
+ "title": "Enrollment settings"
+ },
+ "OSConfiguration": {
+ "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
+ "menuTitle": "Windows operating system recovery configuration"
+ },
+ "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
+ "coManagementAuthorityTitle": "Co-management Settings ",
+ "deploymentProfiles": "Windows Autopilot deployment profiles",
+ "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
+ "descriptionLabel": "Windows enrollment methods",
+ "enrollmentStatusPage": "Enrollment Status Page"
+ },
+ "AppInfoBalloonText": {
+ "Certificate": {
+ "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
+ "keySize": "Select the number of bits contained in the key.",
+ "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
+ "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
+ "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
+ "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
+ "subjectAlternativeName": "Subject alternative name",
+ "subjectNameFormat": "Subject name format",
+ "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
+ },
+ "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
+ "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
+ "configurationSettingsFormat": "Configuration settings format text",
+ "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
+ "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
+ "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
+ "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
+ "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
+ "permissionsSettings": "Select runtime permissions for the associated app.",
+ "policyAssociatedApp": "Select the app that this policy will be associated with.",
+ "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
+ "policyDescription": "Optionally, enter a description for this configuration policy.",
+ "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
+ "policyName": "Enter a name for this configuration policy.",
+ "policyPlatform": "Select the platform this app configuration policy will apply to.",
+ "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
+ "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
+ "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
+ "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
+ "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
+ "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
+ "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
+ "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
+ "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
+ "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
+ "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
+ "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
+ },
+ "EnrollmentRestrictions": {
+ "DeletePayloadLink": {
+ "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
+ "header": "Are you sure you want to delete this restriction?"
+ },
+ "DeviceLimit": {
+ "description": "Specify the maximum number of devices a user can enroll.",
+ "header": "Device limit restrictions",
+ "info": "Define how many devices each user can enroll."
+ },
+ "DeviceType": {
+ "VersionValidation": {
+ "aOSP": "Must be 1.0 or greater.",
+ "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
+ "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
+ "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
+ "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
+ "min": "Minimum cannot be lower than {0}",
+ "minMax": "Minimum version cannot be greater than maximum version.",
+ "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
+ "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
+ },
+ "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
+ "blockManufacturerPlaceHolder": "Manufacturer name",
+ "blockManufacturersHeader": "Blocked manufacturers",
+ "cannotRestrict": "Restriction not supported",
+ "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
+ "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
+ "configurations": "Configure platforms",
+ "deviceManufacturer": "Device manufacturer",
+ "header": "Device type restrictions",
+ "info": "Define which platforms, versions, and management types can enroll.",
+ "manufacturer": "Manufacturer",
+ "max": "Max",
+ "maxVersion": "Maximum version",
+ "min": "Min",
+ "minVersion": "Minimum version",
+ "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
+ "personal": "Personally owned",
+ "platform": "Platform",
+ "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
+ "platformSettings": "Platform settings",
+ "platforms": "Select platforms",
+ "platformsSelected": "{0} platforms selected",
+ "type": "Type",
+ "versions": "versions",
+ "versionsRange": "Allow min/max range:",
+ "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
+ },
+ "Priority": {
+ "saved": "Restriction Priorities were successfully saved."
+ },
+ "Row": {
+ "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
+ },
+ "Table": {
+ "deployed": "Deployed",
+ "name": "Name",
+ "priority": "Priority"
+ },
+ "Type": {
+ "limit": "Device limit restriction",
+ "type": "Device type restriction"
+ },
+ "allUsers": "All Users",
+ "androidRestrictions": "Android restrictions",
+ "create": "Create restriction",
+ "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
+ "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
+ "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
+ "deleteTitle": "Are you sure you want to delete {0} restriction?",
+ "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
+ "edit": "Edit restriction",
+ "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
+ "iosRestrictions": "iOS restrictions",
+ "mDM": "MDM",
+ "macRestrictions": "macOS restrictions",
+ "maxVersion": "Max Version",
+ "minVersion": "Min Version",
+ "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
+ "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
+ "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
+ "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
+ "notFound": "Restriction not found. It may have already been deleted.",
+ "personallyOwned": "Personally owned devices",
+ "restriction": "Restriction",
+ "restrictionLowerCase": "restriction",
+ "restrictionType": "Restriction type",
+ "selectType": "Select restriction type",
+ "selectValidation": "Please select a platform",
+ "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
+ "typeRequired": "Restriction type is required.",
+ "winPhoneRestrictions": "Windows Phone restrictions",
+ "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
+ "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
+ "windowsRestrictions": "Windows restrictions",
+ "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
+ },
+ "WindowsQualityUpdateDaysUntilForcedReboot": {
+ "oneDay": "1 day",
+ "twoDays": "2 days",
+ "zeroDays": "0 days"
+ },
+ "SecurityTemplate": {
+ "aSR": "Attack surface reduction",
+ "accountProtection": "Account protection",
+ "allDevices": "All devices",
+ "antivirus": "Antivirus",
+ "antivirusReporting": "Antivirus Reporting (Preview)",
+ "conditionalAccess": "Conditional access",
+ "deviceCompliance": "Device compliance",
+ "diskEncryption": "Disk encryption",
+ "eDR": "Endpoint detection and response",
+ "ePM": "Endpoint Privilege Management",
+ "firewall": "Firewall",
+ "helpSupport": "Help and support",
+ "setup": "Setup",
+ "wdapt": "Microsoft Defender for Endpoint"
+ },
"OutlookAppConfig": {
"DataProtectionConfiguration": {
"header": "Data Protection configuration"
@@ -100,693 +1787,622 @@
"themesEnabledTitle": "Themes Enabled",
"themesEnabledTooltip": "Specify if the user is allowed to use a custom visual theme."
},
- "Languages": {
- "ar-aE": "Arabic (U.A.E.)",
- "ar-bH": "Arabic (Bahrain)",
- "ar-dZ": "Arabic (Algeria)",
- "ar-eG": "Arabic (Egypt)",
- "ar-iQ": "Arabic (Iraq)",
- "ar-jO": "Arabic (Jordan)",
- "ar-kW": "Arabic (Kuwait)",
- "ar-lB": "Arabic (Lebanon)",
- "ar-lY": "Arabic (Libya)",
- "ar-mA": "Arabic (Morocco)",
- "ar-oM": "Arabic (Oman)",
- "ar-qA": "Arabic (Qatar)",
- "ar-sA": "Arabic (Saudi Arabia)",
- "ar-sY": "Arabic (Syria)",
- "ar-tN": "Arabic (Tunisia)",
- "ar-yE": "Arabic (Yemen)",
- "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
- "az-latn": "Azerbaijani (Latin, Azerbaijan)",
- "bn-bD": "Bangla (Bangladesh)",
- "bn-iN": "Bangla (India)",
- "bs-cyrl": "Bosnian (Cyrillic)",
- "bs-latn": "Bosnian (Latin)",
- "zh-cN": "Chinese (PRC)",
- "zh-hK": "Chinese (Hong Kong S.A.R.)",
- "zh-mO": "Chinese (Macao S.A.R.)",
- "zh-sG": "Chinese (Singapore)",
- "zh-tW": "Chinese (Taiwan)",
- "hr-bA": "Croatian (Latin)",
- "hr-hR": "Croatian (Croatia)",
- "nl-bE": "Dutch (Belgium)",
- "nl-nL": "Dutch (Netherlands)",
- "en-aU": "English (Australia)",
- "en-bZ": "English (Belize)",
- "en-cA": "English (Canada)",
- "en-cabn": "English (Caribbean)",
- "en-iE": "English (Ireland)",
- "en-iN": "English (India)",
- "en-jM": "English (Jamaica)",
- "en-mY": "English (Malaysia)",
- "en-nZ": "English (New Zealand)",
- "en-pH": "English (Republic of the Philippines)",
- "en-sG": "English (Singapore)",
- "en-tT": "English (Trinidad and Tobago)",
- "en-uK": "English (United Kingdom)",
- "en-uS": "English (United States)",
- "en-zA": "English (South Africa)",
- "en-zW": "English (Zimbabwe)",
- "fr-bE": "French (Belgium)",
- "fr-cA": "French (Canada)",
- "fr-cH": "French (Switzerland)",
- "fr-fR": "French (France)",
- "fr-lU": "French (Luxembourg)",
- "fr-mC": "French (Monaco)",
- "de-aT": "German (Austria)",
- "de-cH": "German (Switzerland)",
- "de-dE": "German (Germany)",
- "de-lI": "German (Liechtenstein)",
- "de-lU": "German (Luxembourg)",
- "iu-cans": "Inuktitut (Syllabics, Canada)",
- "iu-latn": "Inuktitut (Latin, Canada)",
- "it-cH": "Italian (Switzerland)",
- "it-iT": "Italian (Italy)",
- "ms-bN": "Malay (Brunei Darussalam)",
- "ms-mY": "Malay (Malaysia)",
- "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
- "mn-mN": "Mongolian (Cyrillic, Mongolia)",
- "no-nB": "Norwegian, Bokmål (Norway)",
- "no-nn": "Norwegian, Nynorsk (Norway)",
- "pt-bR": "Portuguese (Brazil)",
- "pt-pT": "Portuguese (Portugal)",
- "quz-bO": "Quechua (Bolivia)",
- "quz-eC": "Quechua (Ecuador)",
- "quz-pE": "Quechua (Peru)",
- "smj-nO": "Sami, Lule (Norway)",
- "smj-sE": "Sami, Lule (Sweden)",
- "se-fI": "Sami, Northern (Finland)",
- "se-nO": "Sami, Northern (Norway)",
- "se-sE": "Sami, Northern (Sweden)",
- "sma-nO": "Sami, Southern (Norway)",
- "sma-sE": "Sami, Southern (Sweden)",
- "smn": "Sami, Inari (Finland)",
- "sms": "Sami, Skolt (Finland)",
- "sr-Cyrl-bA": "Serbian (Cyrillic)",
- "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
- "sr-Latn-bA": "Serbian (Latin)",
- "sr-Latn-rS": "Serbian (Latin, Serbia)",
- "dsb": "Lower Sorbian (Germany)",
- "hsb": "Upper Sorbian (Germany)",
- "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
- "es-aR": "Spanish (Argentina)",
- "es-bO": "Spanish (Bolivia)",
- "es-cL": "Spanish (Chile)",
- "es-cO": "Spanish (Colombia)",
- "es-cR": "Spanish (Costa Rica)",
- "es-dO": "Spanish (Dominican Republic)",
- "es-eC": "Spanish (Ecuador)",
- "es-eS": "Spanish (Spain)",
- "es-gT": "Spanish (Guatemala)",
- "es-hN": "Spanish (Honduras)",
- "es-mX": "Spanish (Mexico)",
- "es-nI": "Spanish (Nicaragua)",
- "es-pA": "Spanish (Panama)",
- "es-pE": "Spanish (Peru)",
- "es-pR": "Spanish (Puerto Rico)",
- "es-pY": "Spanish (Paraguay)",
- "es-sV": "Spanish (El Salvador)",
- "es-uS": "Spanish (United States)",
- "es-uY": "Spanish (Uruguay)",
- "es-vE": "Spanish (Venezuela)",
- "sv-fI": "Swedish (Finland)",
- "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
- "uz-latn": "Uzbek (Latin, Uzbekistan)",
- "af": "Afrikaans (South Africa)",
- "sq": "Albanian (Albania)",
- "am": "Amharic (Ethiopia)",
- "hy": "Armenian (Armenia)",
- "as": "Assamese (India)",
- "ba": "Bashkir (Russia)",
- "eu": "Basque (Basque)",
- "be": "Belarusian (Belarus)",
- "br": "Breton (France)",
- "bg": "Bulgarian (Bulgaria)",
- "ca": "Catalan (Catalan)",
- "co": "Corsican (France)",
- "cs": "Czech (Czech Republic)",
- "da": "Danish (Denmark)",
- "dv": "Divehi (Maldives)",
- "et": "Estonian (Estonia)",
- "fo": "Faroese (Faroe Islands)",
- "fil": "Filipino (Philippines)",
- "fi": "Finnish (Finland)",
- "gl": "Galician (Galician)",
- "ka": "Georgian (Georgia)",
- "el": "Greek (Greece)",
- "gu": "Gujarati (India)",
- "ha": "Hausa (Latin, Nigeria)",
- "he": "Hebrew (Israel)",
- "hi": "Hindi (India)",
- "hu": "Hungarian (Hungary)",
- "is": "Icelandic (Iceland)",
- "ig": "Igbo (Nigeria)",
- "id": "Indonesian (Indonesia)",
- "ga": "Irish (Ireland)",
- "xh": "isiXhosa (South Africa)",
- "zu": "isiZulu (South Africa)",
- "ja": "Japanese (Japan)",
- "kn": "Kannada (India)",
- "kk": "Kazakh (Kazakhstan)",
- "km": "Khmer (Cambodia)",
- "rw": "Kinyarwanda (Rwanda)",
- "sw": "Kiswahili (Kenya)",
- "kok": "Konkani (India)",
- "ko": "Korean (Korea)",
- "ky": "Kyrgyz (Kyrgyzstan)",
- "lo": "Lao (Lao P.D.R.)",
- "lv": "Latvian (Latvia)",
- "lt": "Lithuanian (Lithuania)",
- "lb": "Luxembourgish (Luxembourg)",
- "mk": "Macedonian (North Macedonia)",
- "ml": "Malayalam (India)",
- "mt": "Maltese (Malta)",
- "mi": "Maori (New Zealand)",
- "mr": "Marathi (India)",
- "moh": "Mohawk (Mohawk)",
- "ne": "Nepali (Nepal)",
- "oc": "Occitan (France)",
- "or": "Odia (India)",
- "ps": "Pashto (Afghanistan)",
- "fa": "Persian",
- "pl": "Polish (Poland)",
- "pa": "Punjabi (India)",
- "ro": "Romanian (Romania)",
- "rm": "Romansh (Switzerland)",
- "ru": "Russian (Russia)",
- "sa": "Sanskrit (India)",
- "st": "Sesotho sa Leboa (South Africa)",
- "tn": "Setswana (South Africa)",
- "si": "Sinhala (Sri Lanka)",
- "sk": "Slovak (Slovakia)",
- "sl": "Slovenian (Slovenia)",
- "sv": "Swedish (Sweden)",
- "syr": "Syriac (Syria)",
- "tg": "Tajik (Cyrillic, Tajikistan)",
- "ta": "Tamil (India)",
- "tt": "Tatar (Russia)",
- "te": "Telugu (India)",
- "th": "Thai (Thailand)",
- "bo": "Tibetan (PRC)",
- "tr": "Turkish (Turkey)",
- "tk": "Turkmen (Turkmenistan)",
- "uk": "Ukrainian (Ukraine)",
- "ur": "Urdu (Islamic Republic of Pakistan)",
- "vi": "Vietnamese (Vietnam)",
- "cy": "Welsh (United Kingdom)",
- "wo": "Wolof (Senegal)",
- "ii": "Yi (PRC)",
- "yo": "Yoruba (Nigeria)"
- },
- "Category": {
- "airPlay": "AirPlay",
- "airPrint": "AirPrint",
- "androidDefenderAtp": "Microsoft Defender for Endpoint",
- "androidDeviceOwnerApplications": "Applications",
- "androidDeviceOwnerPolicyMessages": "Custom support information",
- "androidForWorkPassword": "Device password",
- "appManagement": "Allow or Block apps",
- "applicationGuard": "Microsoft Defender Application Guard",
- "applicationRestrictions": "Restricted Apps",
- "applicationVisibility": "Show or Hide Apps",
- "applications": "App Store",
- "applicationsAndGames": "App Store, Doc Viewing, Gaming",
- "applicationsAndGoogle": "Google Play Store",
- "appsAndExperience": "Apps and experience",
- "associatedDomains": "Associated domains",
- "autonomousSingleAppMode": "Autonomous Single App Mode",
- "azureOperationalInsights": "Azure operational insights",
- "bitLocker": "Windows Encryption",
- "bootOptions": "Boot options",
- "browser": "Browser",
- "builtinApps": "Built-in apps",
- "cameras": "Cameras",
- "cellular": "Cellular",
- "cloudAndStorage": "Cloud and Storage",
- "cloudPrint": "Cloud Printer",
- "complianceEmailProfile": "Email",
- "connectedDevices": "Connected devices",
- "connectivity": "Cellular and connectivity",
- "contentCaching": "Content caching",
- "controlPanelAndSettings": "Control Panel and Settings",
- "credentialGuard": "Microsoft Defender Credential Guard",
- "customCompliance": "Custom Compliance",
- "customConfiguration": "Custom Configuration Profile",
- "customOMASettings": "Custom OMA-URI Settings",
- "customPreferences": "Preference file",
- "dFCISecuritySettings": "Security settings",
- "defender": "Microsoft Defender Antivirus",
- "defenderAntivirus": "Microsoft Defender Antivirus",
- "defenderExploitGuard": "Microsoft Defender Exploit Guard",
- "defenderFirewall": "Windows Firewall",
- "defenderLocalSecurityOptions": "Local device security options",
- "defenderSecurityCenter": "Microsoft Defender Security Center",
- "deliveryOptimization": "Delivery Optimization",
- "derivedCredentialAuthenticationConfiguration": "Derived credential",
- "deviceExperience": "Device experience",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceGuard": "Microsoft Defender Application Control",
- "deviceHealth": "Device Health",
- "devicePassword": "Device password",
- "deviceProperties": "Device Properties",
- "deviceRestrictions": "General",
- "deviceSecurity": "System security",
- "display": "Display",
- "domainJoin": "Domain Join",
- "domains": "Domains",
- "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
- "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
- "edgeKiosk": "Microsoft Edge kiosk mode",
- "editionUpgrade": "Edition Upgrade",
- "education": "Education",
- "educationDeviceCerts": "Device certificates",
- "educationStudentCerts": "Student certificates",
- "educationTakeATest": "Take a Test",
- "educationTeacherCerts": "Teacher certificates",
- "emailProfile": "Email",
- "enterpriseDataProtection": "Windows Information Protection",
- "extensibleSingleSignOn": "Single sign-on app extension",
- "filevault": "FileVault",
- "firewall": "Firewall",
- "games": "Games",
- "gatekeeper": "Gatekeeper",
- "healthMonitoring": "Health monitoring",
- "homeScreenLayout": "Home Screen Layout",
- "iOSWallpaper": "Wallpaper",
- "importedPFX": "PKCS Imported Certificate",
- "iosDefenderAtp": "Microsoft Defender for Endpoint",
- "iosKiosk": "Kiosk",
- "kernelExtensions": "Kernel extensions",
- "keyboardAndDictionary": "Keyboard and dictionary",
- "kiosk": "Kiosk",
- "kioskAndroidEnterprise": "Dedicated devices",
- "kioskConfiguration": "Kiosk",
- "kioskConfigurationV2": "Kiosk",
- "kioskWebBrowser": "Kiosk web browser",
- "lockScreenMessage": "Lock Screen Message",
- "lockedScreenExperience": "Locked Screen Experience",
- "logging": "Reporting and Telemetry",
- "loginItems": "Login items",
- "loginWindow": "Login window",
- "macDefenderAtp": "Microsoft Defender for Endpoint",
- "maintenance": "Maintenance",
- "malware": "Malware",
- "messaging": "Messaging",
- "microphonesAndSpeakers": "Microphones and speakers",
- "networkBoundary": "Network boundary",
- "networkProxy": "Network proxy",
- "notifications": "App Notifications",
- "pKCS": "PKCS Certificate",
- "password": "Password",
- "personalProfile": "Personal profile",
- "personalization": "Personalization",
- "policyOverride": "Override Group Policy",
- "ports": "Ports",
- "powerSettings": "Power Settings",
- "printer": "Printer",
- "privacy": "Privacy",
- "privacyPerApp": "Per-app privacy exceptions",
- "privacyPreferences": "Privacy preferences",
- "projection": "Projection",
- "radios": "Radios",
- "sCCMCompliance": "Configuration Manager Compliance",
- "sCEP": "SCEP Certificate",
- "sCEPProperties": "SCEP Certificate",
- "sMode": "Mode switch (Windows Insider only)",
- "safari": "Safari",
- "search": "Search",
- "session": "Session",
- "sharedDevice": "Shared iPad",
- "sharedPCAccountManager": "Shared multi-user device",
- "singleSignOn": "Single sign-on",
- "smartScreen": "Microsoft Defender SmartScreen",
- "softwareUpdates": "Settings",
- "start": "Start",
- "systemExtensions": "System extensions",
- "systemSecurity": "System Security",
- "trustedCert": "Trusted Certificate",
- "uEFIAccess": "UEFI access",
- "updates": "Updates",
- "userRights": "User Rights",
- "usersAndAccounts": "Users and Accounts",
- "vPN": "Base VPN",
- "vPNApps": "Automatic VPN",
- "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
- "vPNConditionalAccess": "Conditional Access",
- "vPNConnectivity": "Connectivity",
- "vPNDNSTriggers": "DNS Settings",
- "vPNIKEv2": "IKEv2 settings",
- "vPNProxy": "Proxy",
- "vPNSplitTunneling": "Split Tunneling",
- "vPNTrustedNetwork": "Trusted Network Detection",
- "wakeSettings": "Wake settings",
- "webContentFilter": "Web Content Filter",
- "wiFi": "Wi-Fi",
- "win10Wifi": "Wi-Fi",
- "windowsAtp": "Microsoft Defender for Endpoint",
- "windowsDefenderATP": "Microsoft Defender for Endpoint",
- "windowsHelloForBusiness": "Windows Hello for Business",
- "windowsSpotlight": "Windows Spotlight",
- "wiredNetwork": "Wired network",
- "wireless": "Wireless",
- "wirelessProjection": "Wireless projection",
- "workProfile": "Work profile settings",
- "workProfilePassword": "Work profile password",
- "xboxServices": "Xbox services",
- "zebraMx": "MX profile (Zebra only)",
- "complianceActionsLabel": "Actions for noncompliance"
- },
- "WindowsFeatureUpdateProfile": {
- "Details": {
- "Description": {
- "label": "Description"
- },
- "FeatureDeploymentSettings": {
- "header": "Feature deployment settings"
- },
- "FeatureUpdateVersion": {
- "infoballoon": "This feature cannot downgrade a device.",
- "label": "Feature update to deploy"
- },
- "GradualRolloutEndDate": {
- "label": "Final group availability"
- },
- "GradualRolloutInterval": {
- "label": "Days between groups"
- },
- "GradualRolloutStartDate": {
- "label": "First group availability"
- },
- "Name": {
- "label": "Name"
- },
- "OptionalUpdate": {
- "label": "Required or optional update"
- },
- "RolloutOptions": {
- "label": "Rollout options"
- },
- "RolloutSettings": {
- "header": "When would you like to make the update available in Windows Update?"
- },
- "ScopeSettings": {
- "header": "Configure scope tags for this policy."
- },
- "StartDateOnlyStartDate": {
- "label": "First available date"
- },
- "Windows11SideBySideInstall": {
- "disabled": "Disabled",
- "enabled": "Enabled",
- "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
- "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
- "notApplicable": "Not Applicable",
- "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
- },
- "bladeTitle": "Feature update deployments",
- "deploymentSettingsTitle": "Deployment settings",
- "loadError": "Loading failed!",
- "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
- },
- "Notifications": {
- "deploymentSaved": "\"{0}\" has been saved.",
- "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
- },
- "TabName": {
- "deploymentSettings": "Deployment settings",
- "groupAssignmentSettings": "Assignments",
- "scopeSettings": "Scope tags"
- },
- "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
- "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
- "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
- "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
- "profileNameWarning": "Name should be less than 64 characters",
- "specificLicensingRequired": "Some selected capabilities require specific licensing."
- },
- "WIPPinRequirements": {
- "WipLowercaseCharacterPinRequirements": {
- "allow": "Allow the use of lowercase letters in PIN",
- "notAllow": "Do not allow the use of lowercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
- },
- "WipSpecialCharacterPinRequirements": {
- "allow": "Allow the use of special characters in PIN",
- "notAllow": "Do not allow the use of special characters in PIN",
- "requireAtLeastOne": "Require the use of at least one special character in PIN"
- },
- "WipUppercaseCharacterPinRequirements": {
- "allow": "Allow the use of uppercase letters in PIN",
- "notAllow": "Do not allow the use of uppercase letters in PIN",
- "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
- }
- },
- "AppRelationshipStatus": {
- "Grid": {
- "appVersion": "App Version",
- "dependencyName": "Dependency name",
- "lastModifiedTime": "Last modified time",
- "relationship": "Relationship",
- "replaced": "Replaced",
- "searchPlaceholder": "Filter by app name",
- "status": "Status details",
- "statusDetails": "Status",
- "supersedenceName": "Supersedence name"
- },
- "RelatedAppRelationship": {
- "dependencyDescendants": "Child dependency",
- "indirectSupersedence": "Not directly related",
- "supersedenceAncestors": "Superseding",
- "supersedenceDescendants": "Superseded"
- },
- "SupersededReplaced": {
- "no": "No",
- "yes": "Yes"
- },
- "Tabs": {
- "chart": "Chart",
- "dependency": "Dependency",
- "label": "View: ",
- "supersedence": "Supersedence",
- "table": "Table"
- },
- "dependencyGraphAriaLabel": "App dependency chart",
- "supersedenceGraphAriaLabel": "App supersedence chart"
- },
- "CustomCompliance": {
- "FilePicker": {
- "noScriptSelectedError": "Please select a discovery script",
- "scriptFileLabel": "Select your discovery script"
+ "CategoryDescription": {
+ "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
+ "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
+ "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
+ "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
+ "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
+ "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
+ "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
+ "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
+ "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
+ "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
+ "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
+ "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
+ "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
+ "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
+ "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
+ "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
+ "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
+ "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
+ "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
+ "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
+ "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
+ "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
+ "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
+ "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
+ },
+ "EnrollmentStatusScreen": {
+ "Apps": {
+ "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
+ "apps": "apps",
+ "appsListName": "Application list",
+ "blockingApps": "Blocking apps",
+ "managedApps": "Managed apps",
+ "noApps": "No applications",
+ "noAppsError": "Error retrieving applications",
+ "selectApps": "Select apps",
+ "selectedAppsCount": "{0} apps selected (100 max)",
+ "useSelectedAppsAll": "All",
+ "useSelectedAppsSelected": "Selected",
+ "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
},
- "PremiumBanner": {
- "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
- "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
- },
- "ScriptPicker": {
- "objectName": "Script",
- "placeholder": "Click to select",
- "searchboxPlaceholder": "Search by script name",
- "title": "Select a discovery script"
+ "Header": {
+ "application": "Application",
+ "publisher": "Publisher",
+ "version": "Version"
},
- "SummaryGrid": {
- "ariaLabel": "Custom compliance rules summary"
+ "SearchBox": {
+ "ariaLabel": "Search apps",
+ "placeHolder": "Search by name or publisher"
+ },
+ "allowToUseToggle": "Allow users to use device if installation error occurs",
+ "blockToggle": "Block device use until all apps and profiles are installed",
+ "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
+ "collectLogToggle": "Turn on log collection and diagnostics page for end users",
+ "create": "Create Profile",
+ "customMessageTextBox": "Error message",
+ "customMessageToggle": "Show custom message when time limit or error occurs",
+ "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
+ "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
+ "progressToggle": "Show app and profile configuration progress",
+ "resetToggle": "Allow users to reset device if installation error occurs",
+ "timeout": "Show an error when installation takes longer than specified number of minutes"
+ },
+ "ApplicabilityRules": {
+ "GridLabel": {
+ "property": "Property",
+ "rule": "Rule",
+ "ruleDetails": "Rule Details",
+ "value": "Value"
},
- "UploadFile": {
- "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
- "noFileSelectedError": "Please select a json file",
- "parseFileSelectedError": "The json file is invalid"
- }
- },
- "AssignmentFilters": {
- "assignmentFilterColumnHeader": "Filter",
- "noFilters": "None"
- },
- "Platform": {
- "all": "All",
- "android": "Android device administrator",
- "androidAOSP": "Android (AOSP)",
- "androidEnterprise": "Android Enterprise",
- "androidForWork": "Android Enterprise",
- "androidWorkProfile": "Android enterprise",
- "common": "Common",
- "iOS": "iOS/iPadOS",
- "iosAndAndroidPlatformLabel": "iOS and Android",
- "iosCommaAndroidPlatformLabel": "iOS, Android",
- "linux": "Linux",
- "macOS": "macOS",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "windows": "Windows",
- "windows10": "Windows 10 and later",
- "windows10CM": "Windows 10 and later (ConfigMgr)",
- "windows10Holo": "Windows 10 Holographic",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10Team": "Windows 10 Team",
- "windows10X": "Windows 10X",
- "windows8": "Windows 8.1 and later",
- "windows8And10": "Windows 8 and 10",
- "windowsPhone": "Windows Phone 8.1",
- "windows10AndLater": "Windows 10 and later",
- "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
- "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
- "holoLens": "HoloLens",
- "surfaceHub2": "Surface Hub 2",
- "surfaceHub2S": "Surface Hub 2S",
- "windowsPC": "Windows PC"
- },
- "AppInformationTab": {
- "Info": {
- "AppStoreUrl": {
- "android": "Enter the link to the app listing in Google Play store. For example:",
- "androidLink": "https://play.google.com/store/apps/details?id=com.microsoft.office.outlook",
- "microsoftStore": "Enter the 'Link for Intune' URL for the app provided from the store. For more information, see {0}.",
- "microsoftStoreLink": "https://go.microsoft.com/fwlink/?linkid=2115228",
- "microsoftStoreLinkText": "Add Microsoft Store apps (legacy) to Microsoft Intune",
- "windows": "Enter the link to the app listing in the Microsoft Store. For example:",
- "windowsLink": "https://www.microsoft.com/p/microsoft-to-do-lists-tasks-reminders/9nblggh5r558"
+ "assignIf": "Assign profile if",
+ "deleteWarning": "This will delete the selected Applicability Rule",
+ "dontAssignIf": "Don't assign profile if",
+ "editionDisplayText": "{0} {1}",
+ "editionDisplayTextMore": "and {0} more",
+ "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
+ "maxText": "Max",
+ "minText": "Min",
+ "noActionRow": "No Applicability Rules Specified",
+ "oSVersion": "e.g. 1.2.3.4",
+ "toText": "to",
+ "windows10Education": "Windows 10/11 Education",
+ "windows10EducationN": "Windows 10/11 Education N",
+ "windows10Enterprise": "Windows 10/11 Enterprise",
+ "windows10EnterpriseN": "Windows 10/11 Enterprise N",
+ "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
+ "windows10Home": "Windows 10/11 Home",
+ "windows10HomeChina": "Windows 10 Home China",
+ "windows10HomeN": "Windows 10/11 Home N",
+ "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
+ "windows10IoTCore": "Windows 10 IoT Core",
+ "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
+ "windows10OsEdition": "OS edition",
+ "windows10OsVersion": "OS version",
+ "windows10Professional": "Windows 10/11 Professional",
+ "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
+ "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
+ "windows10ProfessionalN": "Windows 10 Professional N",
+ "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
+ "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
+ "windows11CloudEdition": "Windows 11 SE",
+ "windows11CloudEditionN": "Windows 11 SE N"
+ },
+ "OutlookAppConfigSettings": {
+ "AllowUserToChangeSetting": {
+ "title": "Allow user to change setting",
+ "tooltip": "Specify if the user is allowed to change the setting."
+ },
+ "AllowWorkAccounts": {
+ "title": "Allow only work or school accounts",
+ "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
},
- "appPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package types include: Android (.apk), iOS (.ipa), macOS (.pkg), Windows (.msi, .appx, .appxbundle, .msix, and .msixbundle).",
- "applicableDeviceType": "Select the device types that can install this app.",
- "category": "Categorize the app to make it easier for users to sort and find in Company Portal. You can choose multiple categories.",
- "categoryLink": "https://docs.microsoft.com/intune/apps/apps-add#create-and-edit-categories-for-apps",
- "description": "Help your device users understand what the app is and/or what they can do in the app. This description will be visible to them in Company Portal.",
- "developer": "The name of the company or Individual that developed the app. This information will be visible to people signed into the admin center.",
- "displayVersion": "The version of the app. This information will be visible to users in the Company Portal.",
- "fullScreenEnabled": "If configured to yes, launches the web clip as a full-screen web app.",
- "ignoreManifestScope": "If configured to yes, a full screen web clip can navigate to an external web site without showing Safari UI. Otherwise, Safari UI appears when navigating away from the web clip’s URL. This key has no effect when Full screen is false.",
- "infoUrl": "Link people to a website or documentation that has more information about the app. The information URL will be visible to users in Company Portal.",
- "isFeatured": "Featured apps are prominently placed in Company Portal so that users can quickly get to them.",
- "learnMore": "Learn more",
- "logo": "Upload a logo that's associated with the app. This logo will appear next to the app throughout Company Portal.",
- "macOSDmgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .dmg.",
- "macOSPkgAppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .pkg.",
- "minOperatingSystem": "Select the earliest operating system version on which the app can be installed. If you assign the app to a device with an earlier operating system, it will not be installed.",
- "name": "Add a name for the app. This name will be visible in the Intune apps list and to users in the Company Portal.",
- "notes": "Add additional notes about the app. Notes will be visible to people signed in to the admin center.",
- "owner": "The name of the person in your organization who manages licensing or is the point-of-contact for this app. This name will be visible to people signed in to the admin center.",
- "packageId": "The app Package Identifier is the unique value that identifies the app.",
- "packageName": "Contact the device manufacturer to get the app's package name. Example package name: com.example.app",
- "preComposedIconEnabled": "If configured to yes, prevents SpringBoard from adding \"shine\" to the icon.",
- "privacyUrl": "Provide a link for people who want to learn more about the app's privacy settings and terms. The privacy URL will be visible to users in Company Portal.",
- "publisher": "The name of the developer or company that distributes the app. This information will be visible to users in Company Portal.",
- "selectApp": "Search the App Store for iOS store apps that you want to deploy with Intune.",
- "targetApplicationBundleIdentifier": "The application bundle identifier that specifies the application which opens the URL. Available in iOS 14 and later.",
- "useManagedBrowser": "If required, when a user opens the web app, it will open in an Intune-protected browser such as Microsoft Edge or Intune Managed Browser. This setting applies to both iOS and Android devices.",
- "useManagedBrowserLink": "https://docs.microsoft.com/intune/apps/app-configuration-managed-browser",
- "win32AppPackageFile": "A file that contains your app in a format that can be sideloaded on a device. Valid package type: .intunewin.",
- "winGetStoreSelectApp": "Search the Microsoft Store app (new) for store apps that you want to deploy with Intune."
- },
- "descriptionPreview": "Preview",
- "descriptionRequired": "Description is required.",
- "editDescription": "Edit Description",
- "macOSMinOperatingSystemAdditionalInfo": "The minimum operating system for uploading a .pkg file is macOS 10.14. Upload a .pkg file to select an older minimum operating system.",
- "name": "App information",
- "nameForOfficeSuitApp": "App suite information"
- },
- "Tooltips": {
- "PolicySettings": {
- "TouchId1": {
- "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
- "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ "BlockExternalImages": {
+ "title": "Block external images",
+ "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
+ },
+ "ConfigureEmail": {
+ "title": "Configure email account settings"
+ },
+ "DefaultAppSignatureSetting": {
+ "Tooltip": {
+ "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
+ "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
+ },
+ "title": "Default app signature"
+ },
+ "OfficeFeedReplies": {
+ "title": "Discover Feed",
+ "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
+ },
+ "OrganizeMailByThread": {
+ "title": "Organize mail by thread",
+ "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
+ },
+ "PlayMyEmails": {
+ "title": "Play My Emails",
+ "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
+ },
+ "SuggestedReplies": {
+ "title": "Suggested replies",
+ "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
+ },
+ "SyncCalendars": {
+ "title": "Sync Calendars",
+ "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
+ },
+ "TextPredictions": {
+ "title": "Text Predictions",
+ "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
},
- "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
- "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
- "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
- "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
- "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
- "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
- "appSharingToLevel3": "{0}: Allow sending org data to any app",
- "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
- "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
- "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
- "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
- "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
- "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
- "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
- "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
- "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
- "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
- "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
- "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
- "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
- "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
- "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
- "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
- "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
- "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
- "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
- "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
- "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
- "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
- "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
- "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
- "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
- "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
- "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
- "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
- "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
- "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
- "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
- "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
- "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ "ThemesEnabled": {
+ "title": "Themes enabled",
+ "tooltip": "Specify if the user is allowed to use a custom visual theme."
+ }
+ },
+ "Titles": {
+ "ChromeOs": {
+ "devices": "ChromeOS devices"
+ },
+ "ManagedDesktop": {
+ "adminContacts": "Admin contacts",
+ "appPackaging": "App packaging",
+ "autopatchGroups": "Autopatch groups",
+ "devices": "Devices",
+ "featureEnablement": "Feature activate",
+ "feedback": "Feedback",
+ "gettingStarted": "Getting started",
+ "messages": "Messages",
+ "onlineResources": "Online resources",
+ "policyHealth": "Policy health",
+ "policyHealthPreview": "Policy health (preview)",
+ "releaseManagement": "Release management",
+ "serviceRequests": "Service requests",
+ "settings": "Settings",
+ "supportRequests": "Support requests",
+ "tenantEnrollment": "Tenant enrollment",
+ "tenantManagement": "Tenant management"
+ },
+ "actions": "Actions for Non-Compliance",
+ "advancedExchangeSettings": "Exchange online settings",
+ "advancedThreatProtection": "Microsoft Defender for Endpoint",
+ "allApps": "All apps",
+ "allDevices": "All devices",
+ "androidFotaDeployments": "Android FOTA deployments",
+ "appBundles": "App Bundles",
+ "appCategories": "App categories",
+ "appConfigPolicies": "App configuration policies",
+ "appConfigurationStatus": "App Configuration Status",
+ "appInstallStatus": "App install status",
+ "appLicences": "App licenses",
+ "appProtectionPolicies": "App protection policies",
+ "appProtectionStatus": "App Protection status",
+ "appSelectiveWipe": "App selective wipe",
+ "appleVppTokens": "Apple VPP Tokens",
+ "apps": "Apps",
+ "assign": "Assignments",
+ "assignedPermissions": "Assigned permissions",
+ "assignedRoles": "Assigned roles",
+ "autopilotDeploymentReport": "Autopilot deployments (preview)",
+ "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
+ "brandingAndCustomization": "Customization",
+ "cartProfiles": "Cart profiles",
+ "certificateConnectors": "Certificate connectors",
+ "chromeEnterprise": "Chrome Enterprise",
+ "cloudAttachedDevices": "Cloud attached devices (preview)",
+ "cloudPcActions": "Cloud PC actions (preview)",
+ "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
+ "compliancePolicies": "Compliance policies",
+ "complianceScriptManagement": "Scripts",
+ "complianceScriptManagementPreview": "Scripts (preview)",
+ "complianceSettings": "Compliance policy settings",
+ "conditionStatements": "Condition statements",
+ "conditions": "Locations",
+ "configMgr": "Microsoft Endpoint Configuration Manager",
+ "configurationProfiles": "Configuration profiles",
+ "configurationScripts": "Configuration Scripts",
+ "connectorsAndTokens": "Connectors and tokens",
+ "corporateDeviceIdentifiers": "Corporate device identifiers",
+ "customAttributes": "Custom attributes",
+ "customAttributesMacOS": "Custom attributes for macOS",
+ "customNotifications": "Custom notifications",
+ "deploymentSettings": "Deployment settings",
+ "derivedCredentials": "Derived Credentials",
+ "deviceActions": "Device actions",
+ "deviceCategories": "Device categories",
+ "deviceCleanUp": "Device clean-up rules",
+ "deviceEnrollmentManagers": "Device enrollment managers",
+ "deviceExecutionStatus": "Device status",
+ "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
+ "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
+ "devices": "Devices",
+ "discoveredApps": "Discovered apps",
+ "edgePolicies": "Policies for Microsoft Edge",
+ "embeddedSIM": "eSIM cellular profiles (preview)",
+ "enrollDevices": "Enroll devices",
+ "enrollmentFailures": "Enrollment failures",
+ "enrollmentNotifications": "Enrollment notifications (preview)",
+ "enrollmentRestrictions": "Enrollment restrictions",
+ "exchangeActiveSync": "Exchange ActiveSync",
+ "exchangeServiceConnectors": "Exchange service connectors",
+ "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
+ "failuresForDriverUpdates": "Windows Driver update failures",
+ "failuresForFeatureUpdates": "Feature update failures",
+ "failuresForQualityUpdates": "Windows Expedited update failures",
+ "featureFlighting": "Feature flighting",
+ "featureUpdateDeployments": "Feature updates for Windows 10 and later",
+ "flighting": "Flighting",
+ "fotaUpdate": "Firmware over-the-air update",
+ "groupPolicy": "Administrative Templates",
+ "groupPolicyAnalytics": "Group policy analytics",
+ "helpSupport": "Help and support",
+ "helpSupportReplacement": "Help and support ({0})",
+ "iOSAppProvisioning": "iOS app provisioning profiles",
+ "incompleteUserEnrollments": "Incomplete user enrollments",
+ "iosUpdates": "iOS/iPadOS updates",
+ "legacyPcManagement": "Legacy PC management",
+ "macOSSoftwareUpdate": "macOS updates",
+ "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
+ "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
+ "macOSSoftwareUpdateStateSummaries": "updates",
+ "managedGooglePlay": "Managed Google Play",
+ "msfb": "Microsoft Store for Business",
+ "myPermissions": "My permissions",
+ "notifications": "Notifications",
+ "officeApps": "Office apps",
+ "officeProPlusPolicies": "Policies for Office apps",
+ "onPremise": "On Premise",
+ "onPremisesConnector": "Exchange ActiveSync on-premises connector",
+ "onPremisesDeviceAccess": "Exchange ActiveSync devices",
+ "onPremisesManageAccess": "Exchange on-premises access",
+ "outOfDateIosDevices": "Installation failures for iOS devices",
+ "overview": "Overview",
+ "partnerDeviceManagement": "Partner device management",
+ "perUpdateRingDeploymentState": "Per update ring deployment state",
+ "permissions": "Permissions",
+ "platformApps": "{0} apps",
+ "platformDevices": "{0} devices",
+ "platformEnrollment": "{0} enrollment",
+ "policies": "Policies",
+ "profiles": "Profiles",
+ "properties": "Properties",
+ "reports": "Reports",
+ "retireNoncompliantDevices": "Retire noncompliant devices",
+ "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
+ "role": "Role",
+ "scriptManagement": "Scripts",
+ "securityBaselines": "Security baselines",
+ "serviceToServiceConnector": "Exchange online connector",
+ "servicenowConnector": "ServiceNow connector",
+ "shellScripts": "Shell scripts",
+ "teamViewerConnector": "TeamViewer connector",
+ "telecomeExpenseManagement": "Telecom expense management",
+ "tenantAdmin": "Tenant admin",
+ "tenantAdministration": "Tenant administration",
+ "termsAndConditions": "Terms and conditions",
+ "titles": "Titles",
+ "troubleshoot": "Troubleshoot",
+ "troubleshootSupport": "Troubleshooting + support",
+ "user": "User",
+ "userExecutionStatus": "User status",
+ "wdacSupplementalPolicies": "S mode supplemental policies",
+ "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
+ "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
+ "win32CatalogUpdateAppPreviewTitle": "Enterprise App Catalog apps with updates (preview)",
+ "win32CatalogUpdateAppTitle": "Enterprise App Catalog apps with updates",
+ "windows10DriverUpdate": "Driver updates for Windows 10 and later",
+ "windows10QualityUpdate": "Quality updates for Windows 10 and later",
+ "windows10UpdateRings": "Update rings for Windows 10 and later",
+ "windows10XPolicyFailures": "Windows 10X policy failures",
+ "windows365PartnerConnector": "Windows 365 partner connectors",
+ "windowsDiagnosticData": "Windows data",
+ "windowsEnterpriseCertificate": "Windows enterprise certificate",
+ "windowsManagement": "Scripts",
+ "windowsSideLoadingKeys": "Windows side loading keys",
+ "windowsSymantecCertificate": "Windows DigiCert certificate",
+ "windowsThreatReport": "Threat agent status"
+ },
+ "TAPSettings": {
+ "AllowedDataIngestionLocations": {
+ "label": "Allow users to open data from selected services",
+ "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
+ },
+ "AndroidBackup": {
+ "label": "Backup org data to Android backup services",
+ "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ },
+ "AndroidBiometricAuthentication": {
+ "label": "Biometrics instead of PIN for access",
+ "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
+ },
+ "AndroidFingerprint": {
+ "label": "Fingerprint instead of PIN for access (Android 6.0+)",
+ "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
+ },
+ "AndroidOverrideFingerprint": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "AppPIN": {
+ "label": "App PIN when device PIN is set",
+ "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
+ },
+ "BlockDataIngestionIntoOrganizationDocuments": {
+ "label": "Open data into Org documents",
+ "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
+ "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
+ "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
+ "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
+ },
+ "ConnectToVpnOnLaunch": {
+ "label": "Start Microsoft Tunnel connection on app-launch",
+ "tooltip": "Allow connection to VPN when app is launch"
+ },
+ "CredentialsForAccess": {
+ "label": "Work or school account credentials for access",
+ "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
+ },
+ "CustomBrowserDisplayName": {
+ "label": "Unmanaged Browser Name",
+ "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
+ },
+ "CustomBrowserPackageId": {
+ "label": "Unmanaged Browser ID",
+ "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
+ },
+ "CustomBrowserProtocol": {
+ "label": "Unmanaged browser protocol",
+ "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
+ },
+ "DialerRestrictionLevel": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
+ "label": "Transfer telecommunication data to",
+ "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "EncryptData": {
+ "label": "Encrypt org data",
+ "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
},
- "Tap": {
- "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
- "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
- },
- "WipPolicySettings": {
- "25": "",
- "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
- "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
- "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
- "checkInput": "Check input for validity",
- "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
- "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
- "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
- "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
- "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
- "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
- "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
- "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
- "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
- "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
- "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
- "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
- "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
- "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
- "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
- "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
- "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
- "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
- "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
- "name": "The name of this network boundary",
- "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
- "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
- "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
- "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
- "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
- "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
- "protectUnderLock": "Protects app content while the device is in a locked state.",
- "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
- "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
- "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
- "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
- "required": "Required",
- "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
- "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
- "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
- "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
- "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ "EncryptDataAndroid": {
+ "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
+ },
+ "EncryptDataIos": {
+ "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 256-bit AES encryption to app data.",
+ "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
+ "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
},
- "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
- },
+ "EncryptDataOnEnrolledDevices": {
+ "label": "Encrypt org data on enrolled devices",
+ "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
+ },
+ "IOSBackup": {
+ "label": "Backup org data to iTunes and iCloud backups",
+ "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
+ },
+ "IOSFaceID": {
+ "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
+ "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
+ },
+ "IOSOverrideTouchId": {
+ "label": "Override biometrics with PIN after timeout"
+ },
+ "IOSTouchId": {
+ "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
+ "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
+ },
+ "MessagingRedirectAppDisplayName": {
+ "label": "Messaging App Name"
+ },
+ "MessagingRedirectAppPackageId": {
+ "label": "Messaging App Package ID"
+ },
+ "MessagingRedirectAppUrlScheme": {
+ "label": "Messaging App URL Scheme"
+ },
+ "NotificationRestriction": {
+ "label": "Org data notifications",
+ "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
+ },
+ "OpenLinksManagedBrowser": {
+ "label": "Restrict web content transfer with other apps",
+ "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
+ },
+ "OverrideBiometric": {
+ "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
+ },
+ "PinAccess": {
+ "label": "PIN for access",
+ "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
+ },
+ "PinLength": {
+ "label": "Select minimum PIN length",
+ "tooltip": "This setting specifies the minimum number of digits of a PIN."
+ },
+ "PinType": {
+ "label": "PIN type",
+ "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
+ },
+ "Printing": {
+ "label": "Printing org data",
+ "tooltip": "If blocked, the app cannot print protected data."
+ },
+ "ProtectedMessagingRedirectAppType": {
+ "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
+ "label": "Transfer messaging data to",
+ "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
+ },
+ "ReceiveData": {
+ "label": "Receive data from other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ },
+ "RecheckAccessAfter": {
+ "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
+ "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
+ },
+ "RequireClass3Biometrics": {
+ "label": "Class 3 Biometrics (Android 9.0+)",
+ "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
+ },
+ "RequirePinAfterBiometricChange": {
+ "label": "Override Biometrics with PIN after biometric updates",
+ "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
+ },
+ "RestrictKeyboards": {
+ "duplicatePackageError": "The package ID must be unique.",
+ "invalidPackageError": "Invalid package ID",
+ "label": "Approved keyboards",
+ "select": "Select keyboards to approve",
+ "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
+ "title": "Add approved keyboards",
+ "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
+ },
+ "SaveData": {
+ "label": "Save copies of org data",
+ "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
+ },
+ "SaveDataToSelected": {
+ "label": "Allow user to save copies to selected services",
+ "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
+ },
+ "ScreenCaptureAndAndroidAssistant": {
+ "label": "Screen capture and Google Assistant\n",
+ "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
+ },
+ "SendData": {
+ "label": "Send org data to other apps",
+ "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
+ },
+ "SimplePin": {
+ "label": "Simple PIN",
+ "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
+ },
+ "SyncContacts": {
+ "label": "Sync policy managed app data with native apps or add-ins"
+ },
+ "ThirdPartyKeyboards": {
+ "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
+ "label": "Third party keyboards"
+ },
+ "Timeout": {
+ "label": "Timeout (minutes of inactivity)"
+ },
+ "WinCutCopyPaste": {
+ "label": "Allow cut, copy, and paste for",
+ "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
+ },
+ "WinPrintData": {
+ "label": "Print org data",
+ "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
+ },
+ "WinReceiveData": {
+ "label": "Receive data from",
+ "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
+ },
+ "WinSendData": {
+ "label": "Send org data to",
+ "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
+ },
+ "Tap": {
+ "numberOfDays": "Number of days",
+ "pinResetAfterNumberOfDays": "PIN reset after number of days",
+ "previousPinBlockCount": "Select number of previous PIN values to maintain"
+ }
+ },
+ "OptionalFeatureUpdateOptions": {
+ "optional": "Make available to users as an optional update",
+ "optionalValue": "Optional",
+ "required": "Make available to users as a required update",
+ "requiredValue": "Required"
+ },
+ "MicrosoftEdgeChannel": {
+ "beta": "Beta",
+ "dev": "Dev",
+ "stable": "Stable"
+ },
+ "AppType": {
+ "androidEnterpriseSystemApp": "Android Enterprise system app",
+ "androidForWorkApp": "Managed Google Play store app",
+ "androidLobApp": "Android line-of-business app",
+ "androidStoreApp": "Android store app",
+ "builtInAndroid": "Built-In Android app",
+ "builtInApp": "Built-In app",
+ "builtInIos": "Built-In iOS app",
+ "default": "",
+ "iosIPadOSWebClip": "iOS/iPadOS web clip",
+ "iosLobApp": "iOS line-of-business app",
+ "iosStoreApp": "iOS store app",
+ "iosVppApp": "iOS volume purchase program app",
+ "lineOfBusinessApp": "Line-of-business app",
+ "macOSDmgApp": "macOS app (DMG)",
+ "macOSEdgeApp": "Microsoft Edge (macOS)",
+ "macOSLobApp": "macOS line-of-business app",
+ "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
+ "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
+ "macOSPkgApp": "macOS app (PKG)",
+ "macOSWebClip": "macOS web clip",
+ "macOsVppApp": "macOS volume purchase program app",
+ "managedAndroidLobApp": "Managed Android line-of-business app",
+ "managedAndroidStoreApp": "Managed Android store app",
+ "managedGooglePlayApp": "Managed Google Play store app",
+ "managedGooglePlayPrivateApp": "Managed Google Play private app",
+ "managedGooglePlayWebApp": "Managed Google Play web link",
+ "managedIosLobApp": "Managed iOS line-of-business app",
+ "managedIosStoreApp": "Managed iOS store app",
+ "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
+ "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
+ "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
+ "webApp": "Web link",
+ "windowsAppXLobApp": "Windows AppX line-of-business app",
+ "windowsClassicApp": "Windows app (Win32)",
+ "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
+ "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
+ "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
+ "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
+ "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
+ "windowsStoreApp": "Microsoft Store app (legacy)",
+ "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
+ "windowsUniversalLobApp": "Windows Universal line-of-business app",
+ "windowsWebApp": "Windows web link"
+ },
+ "PolicySet": {
+ "appManagement": "Application management",
+ "assignments": "Assignments",
+ "basics": "Basics",
+ "deviceEnrollment": "Device enrollment",
+ "deviceManagement": "Device management",
+ "scopeTags": "Scope tags",
+ "appConfigurationTitle": "App configuration policies",
+ "appProtectionTitle": "App protection policies",
+ "appTitle": "Apps",
+ "iOSAppProvisioningTitle": "iOS app provisioning profiles",
+ "deviceLimitRestrictionTitle": "Device limit restrictions",
+ "deviceTypeRestrictionTitle": "Device type restrictions",
+ "enrollmentStatusSettingTitle": "Enrollment status pages",
+ "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
+ "deviceComplianceTitle": "Device compliance policies",
+ "deviceConfigurationTitle": "Device configuration profiles",
+ "powershellScriptTitle": "Powershell scripts"
+ },
"Win32Program": {
"DeviceRestartBehaviorOptions": {
"allow": "App install may force a device restart",
@@ -819,6 +2435,233 @@
"uninstallCommand": "Uninstall command",
"uninstallCommandTooltip": "The complete uninstallation command line used to uninstall this app."
},
+ "TermsOfUse": {
+ "Languages": {
+ "addLanguage": "Add language",
+ "af": "Afrikaans",
+ "am": "Amharic",
+ "arSA": "Arabic (Saudi Arabia)",
+ "as": "Assamese",
+ "az": "Azerbaijani",
+ "be": "Belarusian",
+ "bg": "Bulgarian",
+ "bn": "Bangla",
+ "bnIN": "Bangla (India)",
+ "bs": "Bosnian",
+ "ca": "Catalan",
+ "caESvalencia": "Valencian (Spain)",
+ "cs": "Czech",
+ "cy": "Welsh",
+ "da": "Danish",
+ "de": "German",
+ "default": "Default",
+ "defaultDetailsTag": "{0} (Default)",
+ "el": "Greek",
+ "en": "English",
+ "enGB": "English (United Kingdom)",
+ "es": "Spanish",
+ "esMX": "Spanish (Mexico)",
+ "et": "Estonian",
+ "eu": "Basque",
+ "fa": "Persian",
+ "fi": "Finnish",
+ "fil": "Filipino",
+ "fr": "French",
+ "frCA": "French (Canada)",
+ "ga": "Irish",
+ "gd": "Scottish Gaelic",
+ "gl": "Galician",
+ "gu": "Gujarati",
+ "ha": "Hausa",
+ "he": "Hebrew",
+ "hi": "Hindi",
+ "hr": "Croatian",
+ "hu": "Hungarian",
+ "hy": "Armenian",
+ "id": "Indonesian",
+ "ig": "Igbo",
+ "is": "Icelandic",
+ "it": "Italian",
+ "ja": "Japanese",
+ "ka": "Georgian",
+ "kk": "Kazakh",
+ "km": "Khmer",
+ "kn": "Kannada",
+ "ko": "Korean",
+ "kok": "Konkani",
+ "kuArab": "Central Kurdish (Arabic)",
+ "ky": "Kyrgyz",
+ "languageOptions": "Language Options",
+ "lb": "Luxembourgish",
+ "lo": "Lao",
+ "lt": "Lithuanian",
+ "lv": "Latvian",
+ "mi": "Maori",
+ "mk": "Macedonian",
+ "ml": "Malayalam",
+ "mn": "Mongolian",
+ "mr": "Marathi",
+ "ms": "Malay",
+ "mt": "Maltese",
+ "ne": "Nepali",
+ "nl": "Dutch",
+ "nnNO": "Norwegian, Nynorsk (Norway)",
+ "no": "Norwegian",
+ "notSpecified": "Language not specified",
+ "nso": "Sesotho sa Leboa",
+ "or": "Odia",
+ "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
+ "paIN": "Punjabi (India)",
+ "pl": "Polish",
+ "prs": "Dari",
+ "ptBR": "Portuguese (Brazil)",
+ "ptPT": "Portuguese (Portugal)",
+ "quz": "Quechua",
+ "removeLanguage": "Remove language",
+ "ro": "Romanian",
+ "ru": "Russian",
+ "rw": "Kinyarwanda",
+ "sd": "Sindhi",
+ "si": "Sinhala",
+ "sk": "Slovak",
+ "sl": "Slovenian",
+ "sq": "Albanian",
+ "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
+ "srCyrlRS": "Serbian (Cyrillic, Serbia)",
+ "srLatnRS": "Serbian (Latin, Serbia)",
+ "sv": "Swedish",
+ "sw": "Kiswahili",
+ "ta": "Tamil",
+ "te": "Telugu",
+ "tg": "Tajik",
+ "th": "Thai",
+ "ti": "Tigrinya",
+ "tk": "Turkmen",
+ "tn": "Setswana",
+ "tr": "Turkish",
+ "tt": "Tatar",
+ "ug": "Uyghur",
+ "uk": "Ukrainian",
+ "ur": "Urdu",
+ "uz": "Uzbek",
+ "vi": "Vietnamese",
+ "wo": "Wolof",
+ "xh": "isiXhosa",
+ "yo": "Yoruba",
+ "zhHans": "Chinese (Simplified)",
+ "zhHant": "Chinese (Traditional)",
+ "zu": "isiZulu"
+ },
+ "AcceptanceExpirationFrequency": {
+ "annually": "Annually",
+ "biannually": "Bi-annually",
+ "monthly": "Monthly",
+ "quarterly": "Quarterly"
+ },
+ "Wizard": {
+ "AgreementTargetEntityScope": {
+ "NotSelected": {
+ "label": "None selected"
+ },
+ "selectEntityTitle": "Select group",
+ "title": "Select group"
+ },
+ "PolicyFile": {
+ "Languages": {
+
+ },
+ "Validations": {
+ "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
+ }
+ },
+ "PolicyTemplate": {
+ "InfoBox": {
+ "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
+ "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
+ "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
+ "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
+ }
+ },
+ "Section": {
+ "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
+ "conditionalAccessTitle": "Conditional access",
+ "termsOfUseSubtitle": "Create and upload documents",
+ "termsOfUseTitle": "Terms of use"
+ },
+ "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
+ "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
+ "acceptanceDurationPlaceholder": "Example: '90'",
+ "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
+ "acceptanceExpirationFrequencyLabel": "Frequency",
+ "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
+ "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
+ "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
+ "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
+ "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
+ "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
+ "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
+ "agreementNameLabel": "Name",
+ "agreementNamePlaceholderText": "Example: 'All users terms of use'",
+ "agreementRequirmentLabel": "Required Upon",
+ "agreementTargetEntityLabel": "Users targeted",
+ "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
+ "agreementUploadPolicyLabel": "Terms of use",
+ "agreementUploadPolicyPlaceholderText": "Upload required PDF",
+ "createButtonLabel": "Create",
+ "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
+ "createPolicyLabel": "Create a policy",
+ "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
+ "isAcceptanceExpirationEnabledLabel": "Expire consents",
+ "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
+ "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
+ "policyFilesLabel": "Terms of use document",
+ "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
+ "policyTemplateLabel": "Policy templates",
+ "title": "New terms of use"
+ },
+ "Details": {
+ "Link": {
+ "auditEvent": "View audit logs",
+ "delete": "Delete",
+ "download": "Preview PDF",
+ "edit": "Edit"
+ },
+ "Property": {
+ "acceptanceDuration": "Duration before re-acceptance required (days)",
+ "acceptanceExpirationFrequency": "Frequency",
+ "acceptanceExpirationStartDateTime": "Expire starting on",
+ "accepted": "Users accepted",
+ "declined": "Users declined",
+ "displayname": "Display name",
+ "isAcceptanceExpirationEnable": "Expire consents",
+ "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
+ "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
+ "name": "Name"
+ },
+ "Tab": {
+ "cAPolicies": "Conditional access policies",
+ "details": "Details",
+ "languages": "Languages"
+ }
+ }
+ },
+ "WIPPinRequirements": {
+ "WipLowercaseCharacterPinRequirements": {
+ "allow": "Allow the use of lowercase letters in PIN",
+ "notAllow": "Do not allow the use of lowercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one lowercase letter in PIN"
+ },
+ "WipSpecialCharacterPinRequirements": {
+ "allow": "Allow the use of special characters in PIN",
+ "notAllow": "Do not allow the use of special characters in PIN",
+ "requireAtLeastOne": "Require the use of at least one special character in PIN"
+ },
+ "WipUppercaseCharacterPinRequirements": {
+ "allow": "Allow the use of uppercase letters in PIN",
+ "notAllow": "Do not allow the use of uppercase letters in PIN",
+ "requireAtLeastOne": "Require the use of at least one uppercase letter in PIN"
+ }
+ },
"Autopilot": {
"AssignResourceAccount": {
"createNewCommandMenu": "Create new",
@@ -1031,268 +2874,1051 @@
"windowsPCCommandMenu": "Windows PC",
"directoryServiceLabel": "Join to Microsoft Entra ID as"
},
- "RoleAssignment": {
- "RoleAssignmentAdmin": "Admin Groups",
- "RoleAssignmentAdminDesc": "Admin group users are the administrators assigned to this role",
- "rolesMenuTitle": "Endpoint Manager roles",
- "RoleAssignmentScopeDesc": "Administrators in this role assignment can target policies, applications and remote tasks",
- "RoleAssignmentScope": "Scope Groups"
+ "EnrollmentType": {
+ "devicesWithEnrollment": "Managed devices",
+ "devicesWithoutEnrollment": "Managed apps"
},
- "MinimumOperatingSystem": {
- "Android": {
- "v10": "Android 10.0",
- "v11": "Android 11.0",
- "v4": "Android 4.0 (Ice Cream Sandwich)",
- "v403": "Android 4.0.3 (Ice Cream Sandwich)",
- "v41": "Android 4.1 (Jelly Bean)",
- "v42": "Android 4.2 (Jelly Bean)",
- "v43": "Android 4.3 (Jelly Bean)",
- "v44": "Android 4.4 (KitKat)",
- "v5": "Android 5.0 (Lollipop)",
- "v51": "Android 5.1 (Lollipop)",
- "v6": "Android 6.0 (Marshmallow)",
- "v7": "Android 7.0 (Nougat)",
- "v71": "Android 7.1 (Nougat)",
- "v8": "Android 8.0 (Oreo)",
- "v81": "Android 8.1 (Oreo)",
- "v9": "Android 9.0 (Pie)"
- },
- "IOS": {
- "v10": "iOS 10.0",
- "v11": "iOS 11.0",
- "v12": "iOS 12.0",
- "v13": "iOS 13.0",
- "v14": "iOS 14.0",
- "v15": "iOS 15.0",
- "v16": "iOS 16.0",
- "v17": "iOS 17.0",
- "v8": "iOS 8.0",
- "v9": "iOS 9.0"
- },
- "MacOS": {
- "V10": {
- "10": "OS X Yosemite 10.10",
- "11": "OS X El Capitan 10.11",
- "12": "macOS Sierra 10.12",
- "13": "macOS High Sierra 10.13",
- "14": "macOS Mojave 10.14",
- "15": "macOS Catalina 10.15",
- "7": "Mac OS X Lion 10.7",
- "8": "OS X Mountain Lion 10.8",
- "9": "OS X Mavericks 10.9"
- },
- "V11": {
- "0": "macOS Big Sur 11.0"
- },
- "V12": {
- "0": "macOS Monterey 12.0"
- },
- "V13": {
- "0": "macOS Ventura 13.0"
- },
- "V14": {
- "0": "macOS Sonoma 14.0"
- }
- },
- "Windows": {
- "V10Release": {
- "release1607": "Windows 10 1607",
- "release1703": "Windows 10 1703",
- "release1709": "Windows 10 1709",
- "release1803": "Windows 10 1803",
- "release1809": "Windows 10 1809",
- "release1903": "Windows 10 1903",
- "release1909": "Windows 10 1909",
- "release2004": "Windows 10 2004",
- "release21H1": "Windows 10 21H1",
- "release21H2": "Windows 10 21H2",
- "release22H2": "Windows 10 22H2",
- "release2H20": "Windows 10 20H2"
- },
- "V11Release": {
- "release21H2": "Windows 11 21H2",
- "release22H2": "Windows 11 22H2"
- },
- "v10": "Windows 10.0",
- "v80": "Windows 8.0",
- "v81": "Windows 8.1"
- },
- "WindowsPhone": {
- "v80": "Windows Phone 8.0",
- "v81": "Windows Phone 8.1"
- }
- },
- "EnrollmentStatusScreen": {
- "Apps": {
- "allowNonBlockingAppInstallation": "Only fail selected blocking apps in technician phase",
- "apps": "apps",
- "appsListName": "Application list",
- "blockingApps": "Blocking apps",
- "managedApps": "Managed apps",
- "noApps": "No applications",
- "noAppsError": "Error retrieving applications",
- "selectApps": "Select apps",
- "selectedAppsCount": "{0} apps selected (100 max)",
- "useSelectedAppsAll": "All",
- "useSelectedAppsSelected": "Selected",
- "useSelectedAppsToggleLabel": "Block device use until required apps are installed if they are assigned to the user/device"
- },
- "Header": {
- "application": "Application",
- "publisher": "Publisher",
- "version": "Version"
+ "AppProtection": {
+ "allAppTypes": "Target to all app types",
+ "androidPlatformLabel": "Android",
+ "appsInAndroidWorkProfile": "Apps in Android Work Profile",
+ "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
+ "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
+ "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
+ "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
+ "appsOnUnmanagedDevices": "Apps on unmanaged devices",
+ "iOSPlatformLabel": "iOS/iPadOS",
+ "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
+ "iosAndroidPlatformLabel": "iOS, Android",
+ "macPlatformLabel": "Mac",
+ "notAvailable": "Not Available",
+ "windows10PlatformLabel": "Windows 10 and later",
+ "withEnrollment": "With enrollment",
+ "withoutEnrollment": "Without enrollment"
+ },
+ "OfficeApplicationAdditionalType": {
+ "projectProRetail": "Project Online Desktop Client",
+ "visioProRetail": "Visio Online Plan 2"
+ },
+ "AzureIAM": {
+ "AuthContext": {
+ "Delete": {
+ "failure": "Failed to delete {0}",
+ "failureCa": "Failed to delete {0} because it is referenced by CA policies",
+ "modifying": "Deleting {0}",
+ "success": "Successfully deleted {0}"
+ },
+ "Notify": {
+ "failure": "Failed to update {0}",
+ "modifying": "Modifying {0}",
+ "success": "Successfully updated {0}"
+ },
+ "menuLabel": "Authentication context"
+ },
+ "PolicyControlFedAuthMethod": {
+ "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
+ "certificate": "Certificate authentication",
+ "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
+ "multifactor": "Multifactor authentication",
+ "require": "Require federated authentication method (Preview)",
+ "whatIfFormat": "{0} - {1}"
+ },
+ "SessionLifetime": {
+ "PersistentBrowser": {
+ "Error": {
+ "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
+ },
+ "Option": {
+ "always": "Always persistent",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "label": "Persistent browser session",
+ "never": "Never persistent"
+ },
+ "Warning": {
+ "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
+ }
+ },
+ "SignInFrequency": {
+ "Aria": {
+ "units": "Hours or days",
+ "value": "Frequency"
+ },
+ "Option": {
+ "Day": {
+ "plural": "{0} days",
+ "singular": "1 day"
+ },
+ "Hour": {
+ "plural": "{0} hours",
+ "singular": "1 hour"
+ },
+ "daysOption": "Days",
+ "everytime": "Every time",
+ "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
+ "hoursOption": "Hours",
+ "label": "Sign-in frequency",
+ "placeholder": "Select units"
+ }
+ },
+ "mainOption": "Modify session lifetime",
+ "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
+ },
+ "SingleSelectorActive": {
+ "failed": "Unable to load this data.",
+ "reattempt": "Loading data. Reattempt {0} of {1}."
},
- "SearchBox": {
- "ariaLabel": "Search apps",
- "placeHolder": "Search by name or publisher"
- },
- "allowToUseToggle": "Allow users to use device if installation error occurs",
- "blockToggle": "Block device use until all apps and profiles are installed",
- "blockToolTip": "If you add Microsoft Word to this list, for example, targeted users and devices will not be able to leave the enrollment status page until Word is successfully installed.",
- "collectLogToggle": "Turn on log collection and diagnostics page for end users",
- "create": "Create Profile",
- "customMessageTextBox": "Error message",
- "customMessageToggle": "Show custom message when time limit or error occurs",
- "enableForAutopilotOnlyToggle": "Only show page to devices provisioned by out-of-box experience (OOBE)",
- "installQualityUpdatesToggle": "Install Windows quality updates (might restart the device) (preview)",
- "progressToggle": "Show app and profile configuration progress",
- "resetToggle": "Allow users to reset device if installation error occurs",
- "timeout": "Show an error when installation takes longer than specified number of minutes"
- },
- "TableHeaders": {
- "activity": "Activity",
- "activityName": "Activity name",
- "actor": "Initiated by (actor)",
- "actorType": "Actor type",
- "app": "App",
- "appName": "App name",
- "applicationName": "Application name",
- "approvalType": "Approval method",
- "assignedGroups": "Group",
- "assignment": "Assignment",
- "assignmentStatus": "Assigned",
- "assignments": "Assignments",
- "attributeName": "Attribute name",
- "attributeType": "Attribute type",
- "bundleId": "Bundle-Id",
- "category": "Category",
- "complianceGracePeriodExpiration": "Compliance grace period expiration",
- "configurationType": "Profile type",
- "conflictingPolicy": "Conflicting Policies",
- "createdDate": "Created date",
- "currentOs": "Current OS",
- "date": "Date",
- "dateRange": "Date range",
- "deployed": "Deployed",
- "description": "Description",
- "device": "Device",
- "deviceId": "Device ID",
- "deviceName": "Device name",
- "deviceOrApplicationName": "Device or application name",
- "deviceReporting": "Devices reporting",
- "diagnosticCode": "Diagnostic Code",
- "diagnosticText": "Diagnostic Text",
- "diagnostics": "Diagnostics",
- "displayName": "Display name",
- "driversToReview": "Drivers to review",
- "eSIMActivationStatus": "Activation status",
- "eSIMCellularStatus": "Cellular status",
- "eSIMICCID": "ICCID",
- "eSIMPoolName": "Cellular subscription",
- "eSIMState": "eSIM state",
- "eSIMTokenAmount": "Total eSIM activation codes",
- "enabled": "Enabled",
- "enabledPlatforms": "Enabled Platforms",
- "encryptionReadiness": "Encryption Readiness",
- "encryptionStatus": "Encryption Status",
- "endTime": "End time",
- "enrollment": "Enrollment",
- "enrollmentAttempt": "Enrollment start",
- "eventDateTime": "Timestamp",
- "eventIdentifier": "Event ID",
- "eventLevel": "Level",
- "excluded": "Excluded",
- "failure": "Failure",
- "featureUpdateDeferral": "Feature Deferral",
- "featureUpdateVersion": "Feature Update Version",
- "featureUpdatesPaused": "Feature (Paused)",
- "featureUpdatesStatus": "Feature",
- "from": "From",
- "groups": "Groups",
- "groupsSelected": "Groups Selected",
- "installationStatus": "Installation Status",
- "issueId": "Issue id",
- "lastCheckinTime": "Last Check-in Time",
- "lastModified": "Last modified",
- "lastScanTime": "Last Scan Time",
- "lastSuccessfulSync": "Last Successful Sync",
- "lastUpdated": "Last Updated",
- "location": "Location",
- "loggedInUser": "Logged in user",
- "message": "Message",
- "model": "Model",
- "mtdConnector": "MTD Connector",
- "name": "Profile name",
- "oSVersion": "OS Version",
- "operationType": "Operation type",
- "os": "OS",
- "packageName": "Package name",
- "partnerName": "Partner",
- "partnerStatus": "Partner status",
- "permission": "Permission",
- "platform": "Platform",
- "policies": "Policies",
- "policy": "Policy",
- "policyType": "Policy type",
- "preventedUpdateDays": "Restricted days",
- "priority": "Priority",
- "profiles": "Profiles",
- "publicAddress": "Public address",
- "publisher": "Publisher",
- "qualityUpdateDeferral": "Quality Deferral",
- "qualityUpdateRelease": "Quality Update Release",
- "qualityUpdateVersion": "Quality Update Version",
- "qualityUpdatesPaused": "Quality (Paused)",
- "qualityUpdatesStatus": "Quality",
- "reason": "Reason",
- "resource": "Resource",
- "roleName": "Name",
- "roles": "Roles",
- "scopeGroups": "Scope groups",
- "scopeSize": "Assigned Scope Groups",
- "scopeTags": "Scope tags",
- "scriptName": "Script name",
- "scriptType": "Script type",
- "servicingOption": "Servicing channel",
- "setting": "Setting",
- "settings": "Settings",
- "siteName": "Site name",
- "source": "Source",
- "sourceProfile": "Source Profile",
- "startTime": "Start time",
- "state": "State",
- "stateDetails": "State details",
- "status": "Status",
- "subject": "Subject",
- "support": "Support",
- "supportEndDate": "Support End Date",
- "tPMVersion": "TPM Version",
- "target": "Target",
- "timeWindows": "Time windows",
- "timeZone": "Time zone",
- "type": "Type",
- "updateScheduleType": "Schedule type",
- "updateStatus": "Update Status",
- "user": "User",
- "userPrincipalName": "User principal name",
- "users": "Users",
- "usersExcluded": "Users excluded",
- "usersTargeted": "Users targeted",
- "value": "Value",
- "includedGroups": "Included Groups",
- "excludedGroups": "Excluded Groups",
- "licenseType": "License type"
- },
+ "UserSelectionBlade": {
+ "DirectoryRoles": {
+ "ariaLabel": "Choose directory roles"
+ },
+ "Excluded": {
+ "gridAria": "List of excluded users"
+ },
+ "Included": {
+ "gridAria": "List of included users"
+ },
+ "Validation": {
+ "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
+ "customRoleSelected": "At least one custom role is selected",
+ "failed": "\"{0}\" must be configured",
+ "roles": "Select at least one role",
+ "usersGroups": "Select at least one user or group"
+ },
+ "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
+ },
+ "advancedTabText": "Advanced",
+ "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
+ "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
+ "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
+ "allDayCheckboxLabel": "All day",
+ "allDevicePlatforms": "Any device",
+ "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
+ "allGuestUserLabel": "All guest and external users",
+ "allRiskLevelsOption": "All risk levels",
+ "allTrustedLocationLabel": "All trusted locations",
+ "allUserGroupSetSelectorLabel": "All users and groups selected",
+ "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
+ "allUsersString": "All users",
+ "and": "{0} AND {1} ",
+ "andWithGrouping": "({0}) AND {1} ",
+ "androidDisplayName": "Android",
+ "anyCloudAppSelection": "Any cloud app",
+ "appContextOptionInfoContent": "Requested authentication tag",
+ "appContextOptionLabel": "Requested authentication tag (Preview)",
+ "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
+ "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
+ "appNotSetSeletorLabel": "0 cloud apps selected",
+ "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
+ "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
+ "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
+ "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
+ "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
+ "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
+ "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
+ "applyConditonLabel": "Configure",
+ "ariaLabelPolicyDisabled": "Policy is disabled",
+ "ariaLabelPolicyEnabled": "Policy is enabled",
+ "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
+ "blockAccess": "Block access",
+ "builtInDirectoryRoleLabel": "Built-in directory roles",
+ "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "casInfoBubble": "This control works for various cloud apps.",
+ "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
+ "cert64DownloadCol": "Download base64 certificate",
+ "cert64Name": "VpnBase64Cert",
+ "certDownloadCol": "Download certificate",
+ "certDurationCol": "Expiry",
+ "certDurationStartCol": "Valid from",
+ "certName": "VpnCert",
+ "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
+ "chooseApplicationsBladeSubtitle": "",
+ "chooseApplicationsBladeTitle": "Choose Applications",
+ "chooseApplicationsCartSubitle": "",
+ "chooseApplicationsCartTitle": "Chosen Applications",
+ "chooseApplicationsEmpty": "No Applications",
+ "chooseApplicationsNone": "None",
+ "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseApplicationsPlural": "{0} and {1} more",
+ "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
+ "chooseApplicationsRemove": "Remove",
+ "chooseApplicationsReturnedPlural": "{0} applications found",
+ "chooseApplicationsReturnedSingular": "1 application found",
+ "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
+ "chooseApplicationsSearchHint": "Search Applications...",
+ "chooseApplicationsSearchLabel": "Applications",
+ "chooseApplicationsSearching": "Searching...",
+ "chooseApplicationsSelect": "Select",
+ "chooseApplicationsSelected": "Selected",
+ "chooseApplicationsSingular": "{0} and 1 more",
+ "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "chooseLocationCorpnetItem": "Corporate network",
+ "chooseLocationSelectedLocationsLabel": "Selected locations",
+ "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
+ "chooseLocationsBladeSubtitle": "",
+ "chooseLocationsBladeTitle": "Choose Locations",
+ "chooseLocationsCartSubitle": "",
+ "chooseLocationsCartTitle": "Chosen Locations",
+ "chooseLocationsEmpty": "No Locations",
+ "chooseLocationsExcludedSelectorTitle": "Select",
+ "chooseLocationsIncludedSelectorTitle": "Select",
+ "chooseLocationsNone": "None",
+ "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
+ "chooseLocationsPlural": "{0} and {1} more",
+ "chooseLocationsRemove": "Remove",
+ "chooseLocationsReturnedPlural": "{0} locations found",
+ "chooseLocationsReturnedSingular": "1 location found",
+ "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
+ "chooseLocationsSearchHint": "Search Locations...",
+ "chooseLocationsSearchLabel": "Locations",
+ "chooseLocationsSearching": "Searching...",
+ "chooseLocationsSelect": "Select",
+ "chooseLocationsSelected": "Selected",
+ "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
+ "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
+ "chooseLocationsSingular": "{0} and 1 more",
+ "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
+ "claimProviderAddCommandText": "New custom control",
+ "claimProviderAddNewBladeTitle": "New custom control",
+ "claimProviderDeleteCommand": "Delete",
+ "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "claimProviderDeleteTitle": "Are you sure?",
+ "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
+ "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
+ "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
+ "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
+ "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
+ "claimProviderNotificationCreateTitle": "Creating '{0}'",
+ "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
+ "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
+ "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
+ "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
+ "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
+ "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
+ "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
+ "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
+ "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "claimProviderNotificationUpdateTitle": "Updating '{0}'",
+ "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
+ "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
+ "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
+ "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
+ "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
+ "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
+ "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
+ "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
+ "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
+ "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
+ "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
+ "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
+ "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
+ "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
+ "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
+ "claimProvidersNone": "No custom controls",
+ "claimProvidersSearchPlaceholder": "Search controls.",
+ "classicPoilcyFilterTitle": "Show",
+ "classicPolicyAllPlatforms": "All Platforms",
+ "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
+ "classicPolicyCloudAppTitle": "Cloud application",
+ "classicPolicyControlAllow": "Allow",
+ "classicPolicyControlBlock": "Block",
+ "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
+ "classicPolicyControlRequireCompliantDevice": "Require compliant device",
+ "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
+ "classicPolicyControlRequireMfa": "Require multifactor authentication",
+ "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
+ "classicPolicyDeleteCommand": "Delete",
+ "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
+ "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
+ "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
+ "classicPolicyDetailBladeTitle": "Details",
+ "classicPolicyDisableCommand": "Disable",
+ "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
+ "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
+ "classicPolicyDisableFailTitle": "Failed to disable classic policy",
+ "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
+ "classicPolicyDisableInProgressTitle": "Disabling classic policy",
+ "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
+ "classicPolicyDisableSuccessTitle": "Classic policy disabled",
+ "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
+ "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
+ "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
+ "classicPolicyFilterAll": "All policies",
+ "classicPolicyFilterDisabled": "Disabled policies",
+ "classicPolicyFilterEnabled": "Enabled policies",
+ "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
+ "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
+ "classicPolicyIncludedPlatformsTitle": "Included device platforms",
+ "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
+ "classicPolicyMigrateCommand": "Migrate",
+ "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
+ "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
+ "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
+ "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
+ "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
+ "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
+ "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
+ "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
+ "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
+ "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
+ "classicPolicySaveFailDescription": "Failed to save '{0}'",
+ "classicPolicySaveFailTitle": "Failed to save classic policy",
+ "classicPolicySaveInProgressDescription": "Saving '{0}'",
+ "classicPolicySaveInProgressTitle": "Saving classic policy",
+ "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
+ "classicPolicySaveSuccessTitle": "Classic policy saved",
+ "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
+ "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
+ "clientAppBladeTitle": "Client apps",
+ "clientAppDescription": "Select the client apps this policy will apply to",
+ "clientAppExchangeActiveSync": "Exchange ActiveSync",
+ "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
+ "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
+ "clientAppLegacyHeader": "Legacy authentication clients",
+ "clientAppMobileDesktop": "Mobile apps and desktop clients",
+ "clientAppModernHeader": "Modern authentication clients",
+ "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
+ "clientAppSelectSpecificClientApps": "Select client apps",
+ "clientAppWebBrowser": "Browser",
+ "clientAppsSelectedLabel": "{0} included",
+ "clientTypeBrowser": "Browser",
+ "clientTypeEas": "Exchange ActiveSync clients",
+ "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
+ "clientTypeModernAuth": "Modern authentication clients",
+ "clientTypeOtherClients": "Other clients",
+ "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
+ "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
+ "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
+ "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
+ "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
+ "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
+ "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
+ "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
+ "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
+ "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
+ "cloudappsSelectorPluralExcluded": "{0} apps excluded",
+ "cloudappsSelectorPluralIncluded": "{0} apps included",
+ "cloudappsSelectorSingularExcluded": "1 app excluded",
+ "cloudappsSelectorSingularIncluded": "1 app included",
+ "cloudappsSelectorUserPlural": "{0} apps",
+ "cloudappsSelectorUserSingular": "1 app",
+ "conditionLabelMulti": "{0} conditions selected",
+ "conditionLabelOne": "1 condition selected",
+ "conditionalAccessBladeTitle": "Conditional Access",
+ "conditionsNotSelectedLabel": "Not configured",
+ "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
+ "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
+ "configureCasText": "Configure Cloud App Security",
+ "configureCustomControlsText": "Configure custom policy",
+ "controlLabelMulti": "{0} controls selected",
+ "controlLabelOne": "1 control selected",
+ "controlValidatorText": "Please select at least one control",
+ "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
+ "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
+ "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
+ "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
+ "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
+ "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
+ "controlsMamInfoBubble": "Device must use these approved client applications.",
+ "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
+ "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
+ "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
+ "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
+ "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
+ "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
+ "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
+ "createNewVpnCert": "New certificate",
+ "createdTimeLabel": "Creation time",
+ "customRoleLabel": "Custom roles (not supported)",
+ "dateRangeTypeLabel": "Date range",
+ "daysOfWeekPlaceholderText": "Filter days of the week",
+ "daysOfWeekTypeLabel": "Days of the week",
+ "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
+ "descriptionContentForControlsAndOr": "For multiple controls",
+ "devicePlatform": "Device platform",
+ "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
+ "devicePlatformInclude": "{0} included",
+ "devicePlatformIncludeExclude": "{0} and {1} excluded",
+ "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
+ "devicePlatformsNone": "None",
+ "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
+ "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
+ "deviceStateAll": "All device state",
+ "deviceStateCompliant": "Device marked as compliant",
+ "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
+ "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
+ "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
+ "deviceStateConditionSelectorLabel": "Device state (deprecated)",
+ "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
+ "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
+ "deviceStateDomainJoinedInfoLinkText": "Learn more.",
+ "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
+ "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
+ "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
+ "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
+ "directoryRolesLabel": "Directory roles",
+ "discardbutton": "Discard",
+ "downloadDefaultFileName": "IP Ranges",
+ "downloadExampleFileName": "Example",
+ "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
+ "duplicate": "Duplicate",
+ "duplicatePolicyName": "{0} COPY",
+ "endDatePickerLabel": "Ends",
+ "endTimePickerLabel": "End time",
+ "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
+ "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
+ "enterUserText": "No user is selected. Select a user.",
+ "evaluationResult": "Evaluation result",
+ "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
+ "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
+ "excludeAllTrustedLocationSelectorText": "all trusted locations",
+ "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
+ "friday": "Friday",
+ "grantControls": "Grant controls",
+ "gridNetworkTrusted": "Trusted",
+ "gridPolicyCreatedDateTime": "Creation Date",
+ "gridPolicyEnabled": "Enabled",
+ "gridPolicyModifiedDateTime": "Modified Date",
+ "gridPolicyName": "Policy Name",
+ "gridPolicyState": "State",
+ "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
+ "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
+ "groupSelectionBladeSelect": "Select groups",
+ "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "groupsSelectionBladeTitle": "Groups",
+ "helpCommonScenariosText": "Interested in common scenarios?",
+ "helpCondition1": "When any user is outside the company network",
+ "helpCondition2": "When users in the 'Managers' group sign-in",
+ "helpConditionsTitle": "Conditions",
+ "helpControl1": "They're required to sign in with multifactor authentication",
+ "helpControl2": "They are required be on an Intune compliant or domain-joined device",
+ "helpControlsTitle": "Controls",
+ "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
+ "helpIntroTitle": "What is Conditional Access?",
+ "helpLearnMoreText": "Want to learn more about Conditional Access?",
+ "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
+ "helpStartStep2": "Specify policy Conditions and Controls",
+ "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
+ "helpStartTitle": "Get started",
+ "highRisk": "High",
+ "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
+ "includeAppsTextFormat": "Include: {0}.",
+ "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
+ "includeUnknownAreasCheckboxLabel": "Include unknown areas",
+ "infoCommandLabel": "Info",
+ "invalidCertDuration": "Invalid cert duration",
+ "invalidIpAddress": "Value must be a valid IP address",
+ "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
+ "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
+ "iosDisplayName": "iOS",
+ "linuxDisplayName": "Linux",
+ "loadAll": "Load all",
+ "loading": "Loading...",
+ "locationConfigureNamedLocationsText": "Configure all trusted locations",
+ "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
+ "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
+ "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
+ "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
+ "locationsAllLocationsLabel": "Any location",
+ "locationsAllNamedLocationsLabel": "All trusted IPs",
+ "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
+ "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
+ "locationsSelectedPrivateLinksLabel": "Selected Private Links",
+ "lowRisk": "Low",
+ "macOsDisplayName": "macOS",
+ "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
+ "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
+ "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
+ "markAsTrustedCheckboxLabel": "Mark as trusted location",
+ "mediumRisk": "Medium",
+ "memberSelectionCommandRemove": "Remove",
+ "menuItemClaimProviderControls": "Custom controls (Preview)",
+ "menuItemClassicPolicies": "Classic policies",
+ "menuItemInsightsAndReporting": "Insights and reporting",
+ "menuItemManage": "Manage",
+ "menuItemNamedLocationsPreview": "Named locations (Preview)",
+ "menuItemNamedNetworks": "Named locations",
+ "menuItemPolicies": "Policies",
+ "menuItemTermsOfUse": "Terms of use",
+ "modifiedTimeLabel": "Modified time",
+ "monday": "Monday",
+ "nameLabel": "Name",
+ "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
+ "namedLocationTypeCountry": "Countries/Regions",
+ "namedLocationTypeLabel": "Define the location using:",
+ "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
+ "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
+ "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
+ "namedNetworkCountryNeeded": "You need to select at least one country/region",
+ "namedNetworkDeleteCommand": "Delete",
+ "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "namedNetworkDeleteTitle": "Are you sure?",
+ "namedNetworkDownloadIpRange": "Download",
+ "namedNetworkInvalidRange": "Value must be a valid IP range.",
+ "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
+ "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
+ "namedNetworkIpRangesTab": "IP ranges",
+ "namedNetworkListAdd": "New location",
+ "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
+ "namedNetworkNameDescription": "Example: 'Redmond office'",
+ "namedNetworkNameInvalid": "The supplied name is invalid.",
+ "namedNetworkNameRequired": "You must supply a name for this location.",
+ "namedNetworkNoIpRanges": "No IP ranges",
+ "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
+ "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
+ "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
+ "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
+ "namedNetworkNotificationCreateTitle": "Creating '{0}'",
+ "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
+ "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
+ "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
+ "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
+ "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
+ "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
+ "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
+ "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
+ "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
+ "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
+ "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
+ "namedNetworkSearchPlaceholder": "Search locations.",
+ "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
+ "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
+ "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
+ "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
+ "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
+ "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
+ "namedNetworkUploadIpRange": "Upload",
+ "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
+ "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
+ "namedNetworksAdd": "New named location",
+ "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
+ "namedNetworksExcludeLabel": "{0} and {1} excluded",
+ "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
+ "namedNetworksIncludeLabel": "{0} included",
+ "namedNetworksNone": "No named locations found.",
+ "namedNetworksTitle": "Configure locations",
+ "namednetworkExceedingSizeErrorBladeTitle": "Error details",
+ "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
+ "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
+ "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
+ "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
+ "newCertName": "new cert",
+ "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
+ "noPolicyRowMessage": "No policies",
+ "noSPSelected": "No service principal selected",
+ "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
+ "noUserSelected": "No user selected",
+ "noneRisk": "No risk",
+ "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
+ "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
+ "oneUserSelected": "1 user selected",
+ "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
+ "or": "{0} OR {1} ",
+ "pickerDoneCommand": "Done",
+ "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
+ "policiesBladeTitle": "Policies",
+ "policiesBladeTitleWithAppName": "Policies: {0}",
+ "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
+ "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
+ "policyAssignmentsSection": "Assignments",
+ "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
+ "policyCloudAppsDisplayTextAllApp": "All apps",
+ "policyCloudAppsLabel": "Cloud apps",
+ "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
+ "policyConditionDevicePlatform": "Device platforms",
+ "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
+ "policyConditionLocation": "Locations",
+ "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
+ "policyConditionLocationPreview": "Locations (Preview)",
+ "policyConditionSigninRisk": "Sign-in risk",
+ "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
+ "policyConditionUserRisk": "User risk",
+ "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
+ "policyConditioniClientApp": "Client apps",
+ "policyControlAllowAccessDisplayedName": "Grant access",
+ "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
+ "policyControlBladeTitle": "Grant",
+ "policyControlBlockAccessDisplayedName": "Block access",
+ "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
+ "policyControlContentDescription": "Control access enforcement to block or grant access.",
+ "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
+ "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
+ "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
+ "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
+ "policyControlRequireMamDisplayedName": "Require approved client app",
+ "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
+ "policyControlSelectAuthStrength": "Require authentication strength",
+ "policyControlsNoControlsSelected": "0 controls selected",
+ "policyControlsSection": "Access controls",
+ "policyCreatBladeTitle": "New",
+ "policyCreateButton": "Create",
+ "policyCreateFailedMessage": "Error: {0}",
+ "policyCreateFailedTitle": "Failed to create '{0}'",
+ "policyCreateInProgressTitle": "Creating '{0}'",
+ "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyCreateSuccessTitle": "Successfully created '{0}'",
+ "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
+ "policyDeleteFailTitle": "Failed to delete '{0}'",
+ "policyDeleteInProgressTitle": "Deleting '{0}'",
+ "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
+ "policyEnforceLabel": "Enable policy",
+ "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
+ "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
+ "policyErrorUnknown": "Something went wrong, please try again later.",
+ "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
+ "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
+ "policyNameCannotBeEmpty": "Policy name can't be empty",
+ "policyNameDevice": "Device policy",
+ "policyNameFormat": "[{0}] {1}",
+ "policyNameMam": "Mobile App Management policy",
+ "policyNameMfaLocation": "Multifactor authentication and location policy",
+ "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
+ "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
+ "policyOff": "Off",
+ "policyOn": "On",
+ "policyReportOnly": "Report-only",
+ "policyReviewSection": "Review",
+ "policySaveButton": "Save",
+ "policyStatusIconDescription": "Policy is Enabled",
+ "policyStatusIconEnabled": "Enabled status icon",
+ "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
+ "policyTemplateName2": "Allow {0} access only on managed devices",
+ "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
+ "policyTriggerRiskSpecific": "Select specific risk level",
+ "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
+ "policyTriggersNoConditionsSelected": "0 conditions selected",
+ "policyTriggersSelectorLabel": "Conditions",
+ "policyUpdateFailedMessage": "Error: {0}",
+ "policyUpdateFailedTitle": "Failed to update {0}",
+ "policyUpdateInProgressTitle": "Updating {0}",
+ "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
+ "policyUpdateSuccessTitle": "Successfully updated {0}",
+ "primaryCol": "Primary",
+ "privateLinkLabel": "Microsoft Entra ID Private Link",
+ "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
+ "requireAllControlsText": "Require all the selected controls",
+ "requireCompliantDevice": "Require compliant device",
+ "requireDomainJoined": "Require domain-joined device",
+ "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
+ "requireMFA": "Require multifactor authentication",
+ "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
+ "requireOneControlText": "Require one of the selected controls",
+ "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
+ "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
+ "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
+ "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
+ "resetFilters": "Reset filters",
+ "sPRequired": "Service principal required",
+ "sPSelectorInfoBalloon": "User or Service Principal you want to test",
+ "saturday": "Saturday",
+ "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
+ "securityDefaultsPolicyName": "Security defaults",
+ "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
+ "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
+ "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
+ "selectDevicePlatforms": "Select device platforms",
+ "selectNamedNetworksSubtitle": "",
+ "selectNamedNetworksTitle": "Select locations",
+ "selectedSP": "Selected Service Principal",
+ "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
+ "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
+ "servicePrincipalDataGridAria": "List of available service principals",
+ "servicePrincipalDropDownLabel": "What does this policy apply to?",
+ "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
+ "servicePrincipalRadioAll": "All owned service principals",
+ "servicePrincipalRadioSelect": "Select service principals",
+ "servicePrincipalSelectionsAria": "Selected service principals grid",
+ "servicePrincipalSelectorAria": "List of chosen service principals",
+ "servicePrincipalSelectorMultiple": "{0} service principals selected",
+ "servicePrincipalSelectorSingle": "1 service principal selected",
+ "servicePrincipalSpecificExc": "Specific service principals excluded",
+ "servicePrincipalSpecificInc": "Specific service principals included",
+ "servicePrincipals": "Service principals",
+ "sessionControlBladeTitle": "Session",
+ "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
+ "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
+ "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
+ "sessionControls": "Session controls",
+ "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
+ "sessionControlsCasLabel": "Use Conditional Access App Control",
+ "sessionControlsSecureSignInLabel": "Require token binding",
+ "sharepointAppName": "SharePoint",
+ "signinRiskInclude": "{0} included",
+ "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
+ "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
+ "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
+ "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
+ "specificUsersExcluded": "specific users excluded",
+ "specificUsersIncluded": "Specific users included",
+ "specificUsersIncludedAndExcluded": "Specific users excluded and included",
+ "startDatePickerLabel": "Starts",
+ "startFreeTrial": "Start a free trial",
+ "startTimePickerLabel": "Start time",
+ "sunday": "Sunday",
+ "testButton": "What If",
+ "thumbprintCol": "Thumbprint",
+ "thursday": "Thursday",
+ "timeConditionAllTimesLabel": "Any time",
+ "timeConditionIntroText": "Configure the time this policy will apply to",
+ "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
+ "timeConditionSelectorLabel": "Time (Preview)",
+ "timeConditionSpecificLabel": "Specific times",
+ "timeSelectorAllTimesText": "Any time",
+ "timeSelectorSpecificTimesText": "Specific times configured",
+ "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
+ "timeZoneDropdownLabel": "Time zone",
+ "timeZoneDropdownPlaceholderText": "Select a time zone",
+ "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
+ "tooManyPoliciesTitle": "More than 50 policies found",
+ "trustedLocationStatusIconDescription": "Location is trusted",
+ "trustedLocationStatusIconEnabled": "Trusted status icon",
+ "tuesday": "Tuesday",
+ "uploadInBadState": "Unable to upload the specified file.",
+ "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
+ "upsellAppsTitle": "Secure applications",
+ "upsellBannerText": "Get a free Premium trial to use this feature",
+ "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
+ "upsellDataTitle": "Secure data",
+ "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
+ "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
+ "upsellRiskTitle": "Protect against risk",
+ "upsellTitle": "Conditional Access",
+ "upsellWhyTitle": "Why use Conditional Access?",
+ "userAppNoneOption": "None",
+ "userNamePlaceholderText": "Enter User Name",
+ "userNotSetSeletorLabel": "0 users and groups selected",
+ "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
+ "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
+ "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
+ "userOrSPSelectionBladeTitle": "Users or workload identities",
+ "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
+ "userRequired": "User Required",
+ "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
+ "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
+ "userSPRequired": "User or Service principal required",
+ "userSPSelectorTitle": "User or Workload identity",
+ "userSelectionBladeAllUsersAndGroups": "All users and groups",
+ "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
+ "userSelectionBladeExcludeTabTitle": "Exclude",
+ "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
+ "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
+ "userSelectionBladeIncludeTabTitle": "Include",
+ "userSelectionBladeIncludedSelectorTitle": "Select",
+ "userSelectionBladeSelectUsers": "Select users",
+ "userSelectionBladeSelectedUsers": "Select users and groups",
+ "userSelectionBladeTitle": "Users and groups",
+ "userSelectorBladeTitle": "Users",
+ "userSelectorExcluded": "{0} excluded",
+ "userSelectorGroupPlural": "{0} groups",
+ "userSelectorGroupSingular": "1 group",
+ "userSelectorIncluded": "{0} included",
+ "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
+ "userSelectorSelected": "{0} selected",
+ "userSelectorTitle": "User",
+ "userSelectorUserAndGroup": "{0}, {1}",
+ "userSelectorUserPlural": "{0} users",
+ "userSelectorUserSingular": "1 user",
+ "userSelectorWithExclusion": "{0} and {1}",
+ "usersGroupsLabel": "Users and groups",
+ "viewApprovedAppsText": "See list of approved client apps",
+ "viewCompliantAppsText": "See list of policy protected client apps",
+ "viewPolicyInformation": "View policy information",
+ "vpnBladeTitle": "VPN connectivity",
+ "vpnCertCreateFailedMessage": "Error: {0}",
+ "vpnCertCreateFailedTitle": "Failed to create {0}",
+ "vpnCertCreateInProgressTitle": "Creating {0}",
+ "vpnCertCreateSuccessMessage": "Successfully created {0}.",
+ "vpnCertCreateSuccessTitle": "Successfully created {0}",
+ "vpnCertNoRowsMessage": "No VPN certificates found",
+ "vpnCertUpdateFailedMessage": "Error: {0}",
+ "vpnCertUpdateFailedTitle": "Failed to update {0}",
+ "vpnCertUpdateInProgressTitle": "Updating {0}",
+ "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
+ "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
+ "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
+ "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
+ "vpnMenuText": "VPN connectivity",
+ "vpncertDropdownDefaultOption": "Duration",
+ "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
+ "vpncertDropdownLabel": "Select duration",
+ "vpncertDropdownOneyearOption": "1 year",
+ "vpncertDropdownThreeyearOption": "3 years",
+ "vpncertDropdownTwoyearOption": "2 years",
+ "wednesday": "Wednesday",
+ "whatIfCountry": "Country/Region",
+ "whatIfCountryInfo": "The country/region the user is signing in from.",
+ "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
+ "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
+ "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
+ "whatIfIpAddress": "IP address",
+ "whatIfIpAddressInfo": "IP address the user is signing in from.",
+ "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
+ "whatIfSelectCountry": "Select country/region...",
+ "whatIfSelectDevicePlatform": "Select device platform...",
+ "whatIfSelectPrivateLink": "Select private link...",
+ "whatIfSelectSignInRisk": "Select sign-in risk...",
+ "whatIfSignInRisk": "Sign-in risk",
+ "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
+ "whatIfUnknownAreas": "Unknown Areas",
+ "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
+ "windowsDisplayName": "Windows",
+ "windowsPhoneDisplayName": "Windows Phone",
+ "workloadIdentities": "Workload identities (preview)",
+ "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
+ "workloadIdentity": "Workload identity"
+ },
+ "SoftwareUpdates": {
+ "BladeTitles": {
+ "overview": "Overview"
+ },
+ "EndUserUpdate": {
+ "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
+ },
+ "Ios": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load iOS software update profiles"
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "iOS update profile",
+ "title": "iOS/iPadOS"
+ },
+ "WizardBlade": {
+ "subtitle": "iOS/iPadOS",
+ "title": "profile"
+ },
+ "listLoadError": "Unable to load iOS software update profiles, try again later",
+ "lowercase": "iOS update policy",
+ "uppercase": "iOS Update policy"
+ },
+ "IosUpdatePolicy": {
+ "Settings": {
+ "IOSVersion": {
+ "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
+ "latestUpdate": "Latest update",
+ "noLongerSupported": "Selected version is no longer supported",
+ "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
+ "prefix": "Install iOS/iPadOS",
+ "selectSupported": "Select update version supported by Apple",
+ "updateToInstall": "Update to install"
+ },
+ "Schedule": {
+ "always": "Update at next check-in",
+ "duringTimeWindows": "Update during scheduled time",
+ "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
+ "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
+ "label": "Schedule type",
+ "outsideActiveHours": "Update outside of active hours (legacy)",
+ "outsideTimeWindows": "Update outside of scheduled time",
+ "timeWindow": "Time window",
+ "timeZone": "Time zone",
+ "title": "Update policy schedule settings:",
+ "weekly": "Weekly schedule",
+ "timeWindowToolTip": null,
+ "timeZoneToolTip": null
+ },
+ "VersionsDropdown": {
+ "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
+ "label": "Select version to install"
+ },
+ "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
+ "notAvailable": "N/A"
+ }
+ },
+ "ListPartEmpty": {
+ "iosUpdates": "There are no iOS update policies to display",
+ "macOsUpdates": "There are no macOS software update policies to display",
+ "windowsUpdates": "There are no update rings for Windows 10 and later to show."
+ },
+ "MacOSSoftwareUpdate": {
+ "AccountSummary": {
+ "Columns": {
+ "deviceName": "Device name",
+ "deviceUpdateStatus": "Device update status",
+ "lastUpdated": "Last updated",
+ "osVersion": "OS version",
+ "userPrincipalName": "User name"
+ },
+ "maximumOSVersionFilter": "Maximum OS version",
+ "minimumOSVersionFilter": "Minimum OS version",
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by device name, user name or OS version",
+ "title": "Account summary for macOS devices"
+ },
+ "Category": {
+ "configurationDataFile": "Configuration data file",
+ "critical": "Critical",
+ "firmware": "Firmware",
+ "other": "Other"
+ },
+ "CategorySummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "successfulUpdateCount": "Successful updates deployed",
+ "totalUpdateCount": "Total updates deployed",
+ "updateCategory": "Update category",
+ "updateCategoryStatus": "Update category status"
+ },
+ "noData": "No data to display"
+ },
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load macOS software update profiles"
+ }
+ },
+ "State": {
+ "available": "Available",
+ "commandFailed": "Command failed",
+ "downloadFailed": "Download failed",
+ "downloadInsufficientNetwork": "Download insufficient network",
+ "downloadInsufficientPower": "Download insufficient power",
+ "downloadInsufficientSpace": "Download insufficient space",
+ "downloaded": "Downloaded",
+ "downloading": "Downloading",
+ "idle": "Idle",
+ "installFailed": "Install failed",
+ "installInsufficientPower": "Install insufficient power",
+ "installInsufficientSpace": "Install insufficient space",
+ "installing": "Installing",
+ "scheduled": "Scheduled",
+ "success": "Success",
+ "unknown": "Unknown"
+ },
+ "StateSummary": {
+ "Columns": {
+ "lastUpdated": "Last Updated",
+ "updateName": "Update name",
+ "updateStatus": "Update status",
+ "version": "Version"
+ },
+ "noData": "No data to display",
+ "searchBoxPlaceholder": "Search by update name or version"
+ },
+ "SummaryBlade": {
+ "subtitle": "macOS update profile",
+ "title": "macOS"
+ },
+ "WizardBlade": {
+ "subtitle": "macOS",
+ "title": "Profile"
+ },
+ "error": "Error",
+ "errorOrErrors": "Error(s)",
+ "errors": "Errors",
+ "listLoadError": "Unable to load macOS software update profiles, try again later",
+ "lowercase": "macOs update policy",
+ "other": "Other",
+ "subtitle": "MacOS software update",
+ "upToDate": "Up to date",
+ "uppercase": "macOS Update Policy"
+ },
+ "Notifications": {
+ "DeleteFailed": {
+ "description": "Please try again later",
+ "title": "Failed to delete {0}"
+ },
+ "LoadAllConfigurationFailed": {
+ "description": "Please try again later"
+ },
+ "LoadConfigurationFailed": {
+ "description": "Please try again later",
+ "title": "Failed to load {0}"
+ },
+ "idWrongFormat": "The provided id for the profile is not in the expected format."
+ },
+ "UpdatePolicy": {
+ "Settings": {
+ "Schedule": {
+ "noneSelected": "At least one time window should be selected",
+ "tooMany": "A maximum of 20 time windows can be configured"
+ }
+ },
+ "endDay": "End day",
+ "endTime": "End time",
+ "startDay": "Start day",
+ "startTime": "Start time",
+ "timeWindowError": "Choose a window of time that spans at least one hour."
+ },
+ "WindowsUpdateForBusiness": {
+ "Notifications": {
+ "LoadAllConfigurationFailed": {
+ "title": "Failed to load update ring profiles for Windows 10 and later."
+ }
+ },
+ "SummaryBlade": {
+ "subtitle": "Update ring for Windows 10 and later",
+ "title": "Windows Update for Business"
+ },
+ "WizardBlade": {
+ "subtitle": "Windows 10 and later",
+ "title": "Update ring for Windows 10 and later"
+ },
+ "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
+ "lowercase": "Update ring",
+ "uppercase": "Update Ring"
+ },
+ "Wizard": {
+ "Tabs": {
+ "updatePolicySettings": "Update policy settings",
+ "updateRingSettings": "Update ring settings"
+ }
+ },
+ "WizardBlade": {
+ "Verb": {
+ "create": "Create {0}",
+ "edit": "Edit {0}"
+ }
+ },
+ "notScannedYet": "Not scanned yet",
+ "outOfDateIosDevices": "Out of date iOS devices"
+ },
+ "AppCategories": {
+ "microsoftEdge": "Microsoft Edge, version 77 and later",
+ "storeApp": "Store app",
+ "office365Suite": "Microsoft 365 Apps",
+ "microsoftDefenderATP": "Microsoft Defender for Endpoint",
+ "other": "Other",
+ "webApplication": "Web Application"
+ },
+ "Filters": {
+ "ruleSyntax": "Rule syntax",
+ "filters": "Filters"
+ },
+ "CustomCompliance": {
+ "FilePicker": {
+ "noScriptSelectedError": "Please select a discovery script",
+ "scriptFileLabel": "Select your discovery script"
+ },
+ "PremiumBanner": {
+ "customComplianceToolTip": "When enabled, devices must be compliant according to custom rules defined in a JSON file based on custom data returned from a discovery PowerShell script.",
+ "label": "Custom Compliance is currently offered in preview. When it becomes generally available, you can add it for an additional cost to the licensing options that include Microsoft Intune."
+ },
+ "ScriptPicker": {
+ "objectName": "Script",
+ "placeholder": "Click to select",
+ "searchboxPlaceholder": "Search by script name",
+ "title": "Select a discovery script"
+ },
+ "SummaryGrid": {
+ "ariaLabel": "Custom compliance rules summary"
+ },
+ "UploadFile": {
+ "jsonFileLabel": "Upload and validate the JSON file with your custom compliance settings",
+ "noFileSelectedError": "Please select a json file",
+ "parseFileSelectedError": "The json file is invalid"
+ }
+ },
"TAP": {
"AccessRequirements": {
"infoText": "Configure the PIN and credential requirements that users must meet to access apps in a work context."
@@ -1311,393 +3937,193 @@
"selectOne": "Select at least one app to create a policy."
}
},
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "CoManagementAuthority": {
- "Confirmation": {
- "deleteMessage": "Affected users will be restricted by the next highest priority co-management authority page assigned or the default co-management authority page, if no other co-management authority page is assigned.",
- "deleteTitle": "{0} is the display name of a configured Co-management authority policy"
- },
- "Grid": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device.",
- "hyperlink": "https://go.microsoft.com/fwlink/?linkid=86016",
- "label": "Co-management authority"
- },
- "Header": {
- "description": "The co-management authority page appears during initial device setup and during first user sign in. If enabled, users can see the configuration progress of assigned apps and profiles targeted to their device."
- },
- "Main": {
- "title": "Co-management Authority"
- },
- "MessageSaved": {
- "body": "Co-management authority policy created."
- },
- "Notification": {
- "createError": "An error occurred while creating Co-management authority policy \"{0}\"",
- "created": "This Co-management authority policy has not been assigned to any users.",
- "creating": "Creating Co-management authority policy",
- "creatingMessage": "Creating {0} Co-management authority policy",
- "deleteError": "An error occurred while deleting Co-management authority policy",
- "deleted": "Co-management authority policy deleted.",
- "deletedMessage": "{0} Co-management authority policy is deleted.",
- "deleting": "Deleting Co-management Authority policy",
- "deletingMessage": "Deleting {0} Co-management Authority policy",
- "fetchError": "An error occurred while displaying Co-management authority policies",
- "saved": "Co-management Authority saved.",
- "savedMessage": "{0} Co-management Authority policy successfully saved.",
- "saving": "Saving Co-management authority",
- "savingMessage": "Saving {0} Co-management authority policy"
- },
- "Priority": {
- "saveError": "An error occurred while saving Co-management authority priorities",
- "saved": "Co-management authority priorities were successfully saved."
- },
- "ReloadNotification": {
- "description": "Reload the Co-management authority policy to try again.",
- "title": "Reload the Co-management authority blade"
- },
- "advancedProperty": "Advanced",
- "commandLineArgs": "Client installation command line arguments.",
- "deviceGroupOnlyMessage": "Co-management authority page profiles can only be assigned to user groups. The devices assigned won't display the co-management authority page.",
- "enterArgument": "Enter argument",
- "installAgent": "Automatically install Configuration Manager agent.",
- "managedDeviceOwnership": "Override co-management policy and use Intune for all workloads.",
- "noAssignmentMessage": "Assign Co-management authority policy to at least one group. Click Properties.",
- "pageDescription": "Co-management authority profiles",
- "pageSetting": "Co-management authority Setting",
- "pageTitle": "Co-management authority",
- "settingDescription": "The co-management settings determine who owns the workloads."
- },
- "AppType": {
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "default": "",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "Microsoft 365 Apps (macOS)",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "webApp": "Web link",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "TAPSettings": {
- "AllowedDataIngestionLocations": {
- "label": "Allow users to open data from selected services",
- "tooltip": "Select the application storage services users can open data from. All other services are blocked. Selecting no services will prevent users from opening data."
- },
- "AndroidBackup": {
- "label": "Backup org data to Android backup services",
- "tooltip": "Select {0} to prevent backup of org data to Android backup services.\nSelect {1} to permit backup of org data to Android backup services.\nPersonal or unmanaged data is not affected."
+ "Category": {
+ "airPlay": "AirPlay",
+ "airPrint": "AirPrint",
+ "androidDefenderAtp": "Microsoft Defender for Endpoint",
+ "androidDeviceOwnerApplications": "Applications",
+ "androidDeviceOwnerPolicyMessages": "Custom support information",
+ "androidForWorkPassword": "Device password",
+ "appManagement": "Allow or Block apps",
+ "applicationGuard": "Microsoft Defender Application Guard",
+ "applicationRestrictions": "Restricted Apps",
+ "applicationVisibility": "Show or Hide Apps",
+ "applications": "App Store",
+ "applicationsAndGames": "App Store, Doc Viewing, Gaming",
+ "applicationsAndGoogle": "Google Play Store",
+ "appsAndExperience": "Apps and experience",
+ "associatedDomains": "Associated domains",
+ "autonomousSingleAppMode": "Autonomous Single App Mode",
+ "azureOperationalInsights": "Azure operational insights",
+ "bitLocker": "Windows Encryption",
+ "bootOptions": "Boot options",
+ "browser": "Browser",
+ "builtinApps": "Built-in apps",
+ "cameras": "Cameras",
+ "cellular": "Cellular",
+ "cloudAndStorage": "Cloud and Storage",
+ "cloudPrint": "Cloud Printer",
+ "complianceEmailProfile": "Email",
+ "connectedDevices": "Connected devices",
+ "connectivity": "Cellular and connectivity",
+ "contentCaching": "Content caching",
+ "controlPanelAndSettings": "Control Panel and Settings",
+ "credentialGuard": "Microsoft Defender Credential Guard",
+ "customCompliance": "Custom Compliance",
+ "customConfiguration": "Custom Configuration Profile",
+ "customOMASettings": "Custom OMA-URI Settings",
+ "customPreferences": "Preference file",
+ "dFCISecuritySettings": "Security settings",
+ "defender": "Microsoft Defender Antivirus",
+ "defenderAntivirus": "Microsoft Defender Antivirus",
+ "defenderExploitGuard": "Microsoft Defender Exploit Guard",
+ "defenderFirewall": "Windows Firewall",
+ "defenderLocalSecurityOptions": "Local device security options",
+ "defenderSecurityCenter": "Microsoft Defender Security Center",
+ "deliveryOptimization": "Delivery Optimization",
+ "derivedCredentialAuthenticationConfiguration": "Derived credential",
+ "deviceExperience": "Device experience",
+ "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
+ "deviceGuard": "Microsoft Defender Application Control",
+ "deviceHealth": "Device Health",
+ "devicePassword": "Device password",
+ "deviceProperties": "Device Properties",
+ "deviceRestrictions": "General",
+ "deviceSecurity": "System security",
+ "display": "Display",
+ "domainJoin": "Domain Join",
+ "domains": "Domains",
+ "edgeBrowser": "Microsoft Edge Legacy (Version 45 and earlier)",
+ "edgeBrowserSmartScreen": "Microsoft Defender SmartScreen",
+ "edgeKiosk": "Microsoft Edge kiosk mode",
+ "editionUpgrade": "Edition Upgrade",
+ "education": "Education",
+ "educationDeviceCerts": "Device certificates",
+ "educationStudentCerts": "Student certificates",
+ "educationTakeATest": "Take a Test",
+ "educationTeacherCerts": "Teacher certificates",
+ "emailProfile": "Email",
+ "enterpriseDataProtection": "Windows Information Protection",
+ "extensibleSingleSignOn": "Single sign-on app extension",
+ "filevault": "FileVault",
+ "firewall": "Firewall",
+ "games": "Games",
+ "gatekeeper": "Gatekeeper",
+ "healthMonitoring": "Health monitoring",
+ "homeScreenLayout": "Home Screen Layout",
+ "iOSWallpaper": "Wallpaper",
+ "importedPFX": "PKCS Imported Certificate",
+ "iosDefenderAtp": "Microsoft Defender for Endpoint",
+ "iosKiosk": "Kiosk",
+ "kernelExtensions": "Kernel extensions",
+ "keyboardAndDictionary": "Keyboard and dictionary",
+ "kiosk": "Kiosk",
+ "kioskAndroidEnterprise": "Dedicated devices",
+ "kioskConfiguration": "Kiosk",
+ "kioskConfigurationV2": "Kiosk",
+ "kioskWebBrowser": "Kiosk web browser",
+ "lockScreenMessage": "Lock Screen Message",
+ "lockedScreenExperience": "Locked Screen Experience",
+ "logging": "Reporting and Telemetry",
+ "loginItems": "Login items",
+ "loginWindow": "Login window",
+ "macDefenderAtp": "Microsoft Defender for Endpoint",
+ "maintenance": "Maintenance",
+ "malware": "Malware",
+ "messaging": "Messaging",
+ "microphonesAndSpeakers": "Microphones and speakers",
+ "networkBoundary": "Network boundary",
+ "networkProxy": "Network proxy",
+ "notifications": "App Notifications",
+ "pKCS": "PKCS Certificate",
+ "password": "Password",
+ "personalProfile": "Personal profile",
+ "personalization": "Personalization",
+ "policyOverride": "Override Group Policy",
+ "ports": "Ports",
+ "powerSettings": "Power Settings",
+ "printer": "Printer",
+ "privacy": "Privacy",
+ "privacyPerApp": "Per-app privacy exceptions",
+ "privacyPreferences": "Privacy preferences",
+ "projection": "Projection",
+ "radios": "Radios",
+ "sCCMCompliance": "Configuration Manager Compliance",
+ "sCEP": "SCEP Certificate",
+ "sCEPProperties": "SCEP Certificate",
+ "sMode": "Mode switch (Windows Insider only)",
+ "safari": "Safari",
+ "search": "Search",
+ "session": "Session",
+ "sharedDevice": "Shared iPad",
+ "sharedPCAccountManager": "Shared multi-user device",
+ "singleSignOn": "Single sign-on",
+ "smartScreen": "Microsoft Defender SmartScreen",
+ "softwareUpdates": "Settings",
+ "start": "Start",
+ "systemExtensions": "System extensions",
+ "systemSecurity": "System Security",
+ "trustedCert": "Trusted Certificate",
+ "uEFIAccess": "UEFI access",
+ "updates": "Updates",
+ "userRights": "User Rights",
+ "usersAndAccounts": "Users and Accounts",
+ "vPN": "Base VPN",
+ "vPNApps": "Automatic VPN",
+ "vPNAppsAndTrafficRules": "Apps and Traffic Rules",
+ "vPNConditionalAccess": "Conditional Access",
+ "vPNConnectivity": "Connectivity",
+ "vPNDNSTriggers": "DNS Settings",
+ "vPNIKEv2": "IKEv2 settings",
+ "vPNProxy": "Proxy",
+ "vPNSplitTunneling": "Split Tunneling",
+ "vPNTrustedNetwork": "Trusted Network Detection",
+ "wakeSettings": "Wake settings",
+ "webContentFilter": "Web Content Filter",
+ "wiFi": "Wi-Fi",
+ "win10Wifi": "Wi-Fi",
+ "windowsAtp": "Microsoft Defender for Endpoint",
+ "windowsDefenderATP": "Microsoft Defender for Endpoint",
+ "windowsHelloForBusiness": "Windows Hello for Business",
+ "windowsSpotlight": "Windows Spotlight",
+ "wiredNetwork": "Wired network",
+ "wireless": "Wireless",
+ "wirelessProjection": "Wireless projection",
+ "workProfile": "Work profile settings",
+ "workProfilePassword": "Work profile password",
+ "xboxServices": "Xbox services",
+ "zebraMx": "MX profile (Zebra only)",
+ "complianceActionsLabel": "Actions for noncompliance"
+ },
+ "EdgeAppConfig": {
+ "AllowedURLs": {
+ "title": "Allowed URLs",
+ "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
},
- "AndroidBiometricAuthentication": {
- "label": "Biometrics instead of PIN for access",
- "tooltip": "Allows use of Android biometric authentication methods, if any, in place of an app PIN."
- },
- "AndroidFingerprint": {
- "label": "Fingerprint instead of PIN for access (Android 6.0+)",
- "tooltip": "Android OS uses fingerprint scans to authenticate Android-device users. This feature supports the native biometric controls on Android devices. OEM-specific biometric settings, like Samsung Pass, are not supported. If allowed, native biometric controls must be used to access the app on a capable device."
- },
- "AndroidOverrideFingerprint": {
- "label": "Override biometrics with PIN after timeout"
- },
- "AppPIN": {
- "label": "App PIN when device PIN is set",
- "tooltip": "If not required, an app PIN does not need to be used to access the app if the device PIN is set on an MDM enrolled device. \n\nNote: Intune cannot detect device enrollment with a third-party EMM solution on Android."
- },
- "BlockDataIngestionIntoOrganizationDocuments": {
- "label": "Open data into Org documents",
- "tooltip1": "Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open and other options to share data between accounts in this app.",
- "tooltip2": "When set to Block, you can configure the following setting, Allow user to open data from selected services, to specify which services are allowed for Org data locations.",
- "tooltip3": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0}.",
- "tooltip4": "Note: This setting is only enforced if the setting \"Receive data from other apps\" is set to \"Policy managed apps\". \nNote: This setting does not apply to all applications. For more information see {0} or {0}."
- },
- "ConnectToVpnOnLaunch": {
- "label": "Start Microsoft Tunnel connection on app-launch",
- "tooltip": "Allow connection to VPN when app is launch"
- },
- "CredentialsForAccess": {
- "label": "Work or school account credentials for access",
- "tooltip": "If required, work or school credentials must be used to access the policy-managed app. If PIN or biometric methods also required for access to the app, the work or school account credentials will be required on top of those prompts."
- },
- "CustomBrowserDisplayName": {
- "label": "Unmanaged Browser Name",
- "tooltip": "Enter the application name for browser associated with the \"Unmanaged Browser ID\". This name will be displayed to users if the specified browser is not installed."
- },
- "CustomBrowserPackageId": {
- "label": "Unmanaged Browser ID",
- "tooltip": "Enter the application ID for a single browser. Web content (http/s) from policy managed applications will open in the specified browser."
- },
- "CustomBrowserProtocol": {
- "label": "Unmanaged browser protocol",
- "tooltip": "
Enter the protocol for a single unmanaged browser. Web content (http/s) from policy managed applications will open in any app that supports this protocol.
\n\n
Note: Include only the protocol prefix. If your browser requires links of the form \"mybrowser://www.microsoft.com\", enter \"mybrowser\".
Cut, copy, and paste data between your app and other approved apps installed on the device. Choose to block these actions completely between apps, allow these actions for use with any app, or restrict use to apps that your organization manages.
\n\n
Policy-managed apps with paste in gives you the option to accept incoming content pasted from another app. However, it blocks users from sharing content outwardly, unless sharing with a managed app.
"
- },
- "DialerRestrictionLevel": {
- "iosTooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that tel and telprompt have been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version 12.7.0+).",
- "label": "Transfer telecommunication data to",
- "tooltip": "Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "EncryptData": {
- "label": "Encrypt org data",
- "link": "https://docs.microsoft.com/en-us/intune/app-protection-policy-settings-android#data-relocation-settings",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption.\n \nSelect {1} to not enforce encrypting org data with Intune app layer encryption.\n\n \nNote: For more information on Intune app layer encryption, see {2}."
- },
- "EncryptDataAndroid": {
- "tooltip": "
Choose Require to enable encryption of work or school data in this app. Intune uses a wolfSSL, 256-bit AES encryption scheme along with the Android Keystore system to securely encrypt app data. Data is encrypted synchronously during file I/O tasks. Content on the device storage is always encrypted. New files will be encrypted with 256-bit keys. Existing 128-bit encrypted files will undergo a migration attempt to 256-bit keys, but the process is not guaranteed. Files encrypted with 128-bit keys will remain readable.
\n\n
The encryption method is FIPS 140-2 compliant.
"
- },
- "EncryptDataIos": {
- "tooltip1": "Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device encryption to protect app data while the device is locked. Applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 128-bit AES encryption to app data.",
- "tooltip2": "When you enable this setting, the user may be required to set up and use a PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message \"Your organization has required you to first enable a device PIN to access this app.\"",
- "tooltip3": "Go to the official Apple documentation to see which iOS encryption modules are FIPS 140-2 compliant or pending FIPS 140-2 compliance."
- },
- "EncryptDataOnEnrolledDevices": {
- "label": "Encrypt org data on enrolled devices",
- "tooltip": "Select {0} to enforce encrypting org data with Intune app layer encryption on all devices. \n\nSelect {1} to not enforce encrypting org data with Intune app layer encryption on enrolled devices."
- },
- "IOSBackup": {
- "label": "Backup org data to iTunes and iCloud backups",
- "tooltip": "Select {0} to prevent backup of org data to iTunes or iCloud. \nSelect {1} to permit backup of org data to iTunes or iCloud. \nPersonal or unmanaged data is not affected."
- },
- "IOSFaceID": {
- "label": "Face ID instead of PIN for access (iOS 11+/iPadOS)",
- "tooltip": "Face ID uses facial recognition technology to authenticate users on iOS/iPadOS devices. Intune calls the LocalAuthentication API to authenticate users using Face ID. If allowed, Face ID must be used to access the app on a Face ID capable device."
- },
- "IOSOverrideTouchId": {
- "label": "Override biometrics with PIN after timeout"
- },
- "IOSTouchId": {
- "label": "Touch ID instead of PIN for access (iOS 8+/iPadOS)",
- "tooltip": "Touch ID uses fingerprint recognition technology to authenticate users on iOS devices. Intune calls the LocalAuthentication API to authenticate users using Touch ID. If allowed, Touch ID must be used to access the app on a Touch ID capable device."
- },
- "MessagingRedirectAppDisplayName": {
- "label": "Messaging App Name"
- },
- "MessagingRedirectAppPackageId": {
- "label": "Messaging App Package ID"
+ "ApplicationProxyRedirection": {
+ "header": "Application proxy",
+ "title": "Application proxy redirection",
+ "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
},
- "MessagingRedirectAppUrlScheme": {
- "label": "Messaging App URL Scheme"
- },
- "NotificationRestriction": {
- "label": "Org data notifications",
- "tooltip": "
Select one of the following options to specify how notifications for org accounts are shown for this app and any connected devices such as wearables:
\n
{0}: Do not share notifications.
\n
{1}: Do not share org data in notifications. If not supported by the application, notifications are blocked.
\n
{2}: Share all notifications.
\n
Android only:\n Note: This setting does not apply to all applications. For more information see {3}
\n\n
iOS only:\nNote: This setting does not apply to all applications. For more information see {4}
"
- },
- "OpenLinksManagedBrowser": {
- "label": "Restrict web content transfer with other apps",
- "tooltip": "
Select one of the following options to specify the apps that this app can open web content in:
Unmanaged browser: Allow web content to open only in the unmanaged browser defined by \"Unmanaged browser protocol\" setting
\n
Any app: Allow web links in any app
"
- },
- "OverrideBiometric": {
- "tooltip": "If required, depending on the timeout (minutes of inactivity), a PIN prompt will override biometric prompts. If this timeout value is not met, the biometric prompt will continue to show. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. "
- },
- "PinAccess": {
- "label": "PIN for access",
- "tooltip": "If required, a PIN must be used to access the policy-managed app. Users must create an access PIN the first time that they open the app from a work or school account."
- },
- "PinLength": {
- "label": "Select minimum PIN length",
- "tooltip": "This setting specifies the minimum number of digits of a PIN."
- },
- "PinType": {
- "label": "PIN type",
- "tooltip": "Numeric PINs are made up of all numbers. Passcodes are made up of alphanumeric characters and special characters. "
- },
- "Printing": {
- "label": "Printing org data",
- "tooltip": "If blocked, the app cannot print protected data."
- },
- "ProtectedMessagingRedirectAppType": {
- "iosTooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0).",
- "label": "Transfer messaging data to",
- "tooltip": "Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app."
- },
- "ReceiveData": {
- "label": "Receive data from other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can receive data from: \n\nNone: Do not allow receiving data in org documents or accounts from any app \n\nPolicy managed apps: Only allow receiving data in org documents or accounts from other policy managed apps\n \nAny app with incoming org data: Allow receiving data in org documents or accounts from from any app and treat all incoming data without an user account as org data \n\nAll apps: Allow receiving data in org documents or accounts from any app"
+ "BlockedURLs": {
+ "title": "Blocked URLs",
+ "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
+ },
+ "Bookmarks": {
+ "header": "Managed bookmarks",
+ "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
+ "uRL": "URL"
},
- "RecheckAccessAfter": {
- "label": "Recheck the access requirements after (minutes of inactivity)\n\n",
- "tooltip": "If the policy-managed app is inactive for longer than the number of minutes of inactivity specified, the app will prompt the access requirements (i.e PIN, conditional launch settings) to be rechecked after the app is launched."
- },
- "RequireClass3Biometrics": {
- "label": "Class 3 Biometrics (Android 9.0+)",
- "tooltip": "For more information on class 3 biometrics refer to the documentation available here"
- },
- "RequirePinAfterBiometricChange": {
- "label": "Override Biometrics with PIN after biometric updates",
- "tooltip": "If class 3 biometrics are supported by the device (more info here), when a change in biometrics is detected, a PIN prompt will override biometric prompts. This setting only takes effect once a biometric has been used to access the app."
- },
- "RestrictKeyboards": {
- "duplicatePackageError": "The package ID must be unique.",
- "invalidPackageError": "Invalid package ID",
- "label": "Approved keyboards",
- "select": "Select keyboards to approve",
- "subtitle": "Add all keyboards and input methods that users are allowed to use with targeted apps. Enter the keyboard name as you would like it to appear to the end user.",
- "title": "Add approved keyboards",
- "toolTip": "Select Require and then specify a list of approved keyboards for this policy. Learn more."
- },
- "SaveData": {
- "label": "Save copies of org data",
- "tooltip": "Select {0} to prevent saving a copy of org data to a new location, other than the selected storage services, using \"Save As\".\n Select {1} to permit saving a copy of org data to a new location using \"Save As\". \n\n\nNote: This setting does not apply to all applications. For more information see {2}.\n"
- },
- "SaveDataToSelected": {
- "label": "Allow user to save copies to selected services",
- "tooltip": "Select the storage services users can save copies of org data to. All other services are blocked. Selecting no services will prevent users from saving a copy of org data."
- },
- "ScreenCaptureAndAndroidAssistant": {
- "label": "Screen capture and Google Assistant\n",
- "tooltip": "If blocked, both screen capture and Google Assistant app scanning capabilities will be disabled when using the policy-managed app. This feature supports the usual Google Assistant app. Third party assistants using Google's Assist API are not supported. Choosing Block will also blur the App-Switcher preview image when using the app with a work or school account."
- },
- "SendData": {
- "label": "Send org data to other apps",
- "tooltip": "Select one of the following options to specify the apps that this app can send org data to: \n\n\nNone: Do not allow sending org data to any app \n\n\nPolicy managed apps: Only allow sending org data to other policy managed apps \n\n\nPolicy managed apps with OS sharing: Only allow sending org data to other policy managed apps and sending org documents to other MDM managed apps on enrolled devices \n\n\nPolicy managed apps with Open-In/Share filtering: Only allow sending org data to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps\n \n\nAll apps: Allow sending org data to any app"
- },
- "SimplePin": {
- "label": "Simple PIN",
- "tooltip": "If blocked, users may not create a simple PIN. A simple PIN is a string of consecutive or repetitive digits, such as 1234, ABCD, or 1111. Please note that blocking simple PIN of type 'Passcode' requires the passcode to have at least one number, one letter, and one special character."
- },
- "SyncContacts": {
- "label": "Sync policy managed app data with native apps or add-ins"
- },
- "ThirdPartyKeyboards": {
- "infoBox": "Keyboard restrictions will apply to all areas of an app. Personal accounts for apps that support multiple identities will be affected by this restriction. Learn more.",
- "label": "Third party keyboards"
- },
- "Timeout": {
- "label": "Timeout (minutes of inactivity)"
- },
- "WinCutCopyPaste": {
- "label": "Allow cut, copy, and paste for",
- "tooltip": "Select one of the following options to specify the sources and destinations org users can cut or copy or paste org data: \n\nAny destination and any source: Org users can paste data from and cut/copy data to any account, document, location or application. \n\nNo destination or source: Org users cannot cut, copy or paste data to or from external accounts, documents, locations or applications from or into the org context."
- },
- "WinPrintData": {
- "label": "Print org data",
- "tooltip": "Select Block to prevent printing of org data. Select Allow to permit printing of org data. Personal or unmanaged data is not affected."
- },
- "WinReceiveData": {
- "label": "Receive data from",
- "tooltip": "Select one of the following options to specify the sources org users can receive data from: \n\nAll sources: Org users can open data from any account, document, location or application into the org context. \n\nNo sources: Org users cannot open data from external accounts, documents, locations or applications into the org context."
- },
- "WinSendData": {
- "label": "Send org data to",
- "tooltip": "Select one of the following options to specify the destinations org users can send data to: \n\nAll destinations: Org users can send org data to any account, document, location or application. \n\nNo destinations: Org users cannot send org data to external accounts, documents, locations or applications from the org context."
- },
- "Tap": {
- "numberOfDays": "Number of days",
- "pinResetAfterNumberOfDays": "PIN reset after number of days",
- "previousPinBlockCount": "Select number of previous PIN values to maintain"
- }
- },
- "ScheduledAction": {
- "Form": {
- "editBlockActionInfo": "One block action is required for all compliance policies.",
- "graceperiod": "Schedule (days after noncompliance)",
- "graceperiodInfo": "Specify the number of days after noncompliance after which this action should be triggered for the user's device",
- "subtitle": "Specify action parameters",
- "title": "Action parameters"
- },
- "List": {
- "gracePeriodDay": "{0} day after noncompliance",
- "gracePeriodDays": "{0} days after noncompliance",
- "gracePeriodHour": "{0} hour after noncompliance",
- "gracePeriodHours": "{0} hours after noncompliance",
- "gracePeriodMinute": "{0} minute after noncompliance",
- "gracePeriodMinutes": "{0} minutes after noncompliance",
- "immediately": "Immediately",
- "schedule": "Schedule",
- "scheduleInfoBalloon": "Days after noncompliance",
- "subtitle": "Specify the sequence of actions on noncompliant devices",
- "title": "Actions"
- },
- "Notification": {
- "additionalEmailLabel": "Others",
- "additionalRecipients": "Additional recipients (via email)",
- "additionalRecipientsBladeTitle": "Select additional recipients",
- "emailAddressPrompt": "Enter email addresses (separated by commas)",
- "invalidEmail": "Invalid email address",
- "messageTemplate": "Message template",
- "noneSelected": "None selected",
- "notSelected": "Not selected",
- "numSelected": "{0} selected",
- "selected": "Selected"
- },
- "block": "Mark device noncompliant",
- "lockDevice": "Lock device (local action)",
- "lockDeviceWithPasscode": "Lock device (local action)",
- "noAction": "No action",
- "noActionRow": "No actions, select 'Add' to add an action",
- "pushNotification": "Send push notification to end user",
- "remoteLock": "Remotely lock the noncompliant device",
- "removeSourceAccessProfile": "Remove source access profile",
- "retire": "Add device to retire list",
- "wipe": "Wipe",
- "emailNotification": "Send email to end user"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "required": "Required",
- "uninstall": "Uninstall"
+ "HomepageURL": {
+ "header": "Managed homepage",
+ "title": "Homepage shortcut URL",
+ "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
+ },
+ "PersonalContext": {
+ "label": "Redirect restricted sites to personal context",
+ "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
+ }
},
- "CustomComplianceScript": {
- "CustomScriptWizardTitle": {
- "create": "Create custom script",
- "edit": "Edit custom script"
- },
- "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
- "customScriptCapitalized": "Custom script",
- "customScriptLowercase": "custom script",
- "detectionScript": "Detection script"
- },
"Devices": {
"General": {
"android": "Android"
@@ -1712,47 +4138,425 @@
"windowsHomeSku": "Windows Home Sku",
"windowsMobile": "Windows Mobile"
},
- "AppInfoBalloonText": {
- "Certificate": {
- "customSubjectName": "CN={{UserName}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US\nor\nCN={{AAD_Device_ID}},E={{EmailAddress}},OU=EnterpriseUsers,O=Contoso Corporation,L=Redmond,ST=WA,C=US",
- "keySize": "Select the number of bits contained in the key.",
- "keyUsage": "Specify the cryptographic action that is required to exchange the certificate’s public key.",
- "renewalThreshold": "Enter the percentage (between 1 and 99 percent) of remaining certificate lifetime that is allowed before a device can request renewal of the certificate. The recommended amount in Intune is 20%. (1-99)",
- "rootCert": "Choose a previously configured and assigned root CA certificate profile. The CA certificate must match the root certificate of the CA that is issuing the certificate for this profile (the one you are currently configuring).",
- "scepServerUrl": "Enter a URL for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "scepServerUrls": "Add one or more URLs for the NDES Server that issues certificates through SCEP (Must be HTTPS). e.g. https://contoso.com/certsrv/mscep/mscep.dll",
- "subjectAlternativeName": "Subject alternative name",
- "subjectNameFormat": "Subject name format",
- "validityPeriod": "The amount of time remaining before the certificate expires. Enter a value that is equal to or lower than the validity period shown in the certificate template. Default is set at one year."
- },
- "appInstallContext": "This specifies the install context to be associated with this app. For dual mode apps, select the desired context for this app. For all other apps, this is pre-selected based on the package and cannot be modified.",
- "autoUpdateMode": "Configure the update priority for the app. Select Default to require the device to be connected to WiFi, to be charging, and not to be actively in use before updating the app. Select High Priority to update the app as soon as the developer has published the app, regardless of charge status, WiFi capability, or end user activity on the device. Select Postponed to forgo app updates for up to 90 days. High priority and postponed will only take effect on DO devices.",
- "configurationSettingsFormat": "Configuration settings format text",
- "ignoreVersionDetection": "Set this to “Yes” for apps that are automatically updated by the app developer (such as Google Chrome).",
- "ignoreVersionDetectionMacOSLobApp": "Select \"Yes\" for apps that are automatically updated by app developer or to only check for app bundleID before installation. Select \"No\" to check for app bundleID and version number before installation.",
- "installAsManagedMacOSLobApp": "This setting only applies to macOS 11 and higher. The app will be installed but not managed on macOS 10.15 and lower.",
- "installContextDropdown": "Select the appropriate install context. User context will install the app only for the targeted user while device context will install the app for all users on the device.",
- "ldapUrl": "This is the LDAP hostname where clients can get the public encryption keys for email recipients. Emails will be encrypted when a key is available. Supported formats:
ldap.example.com
\n
ldap.example.com:123
\n
ldap://ldap.example.com
ldap://ldap.example.com:123
ldaps://ldap.example.com
\n
ldaps://ldap.example.com:123
",
- "permissionsSettings": "Select runtime permissions for the associated app.",
- "policyAssociatedApp": "Select the app that this policy will be associated with.",
- "policyConfigurationSettings": "Select the method you want to use to define configuration settings for this policy.",
- "policyDescription": "Optionally, enter a description for this configuration policy.",
- "policyEnrollmentType": "Choose whether these settings are managed through device management or apps made with Intune SDK.",
- "policyName": "Enter a name for this configuration policy.",
- "policyPlatform": "Select the platform this app configuration policy will apply to.",
- "policyProfileType": "Select the device profile types that this app configuration profile will apply to",
- "policySMime": "Configure S/MIME signing and encryption settings for Outlook.",
- "sMimeDeployCertsFromIntune": "Specify whether or not S/MIME certificates will be delivered from Intune for use with Outlook.\nIntune can automatically deploy signing and encryption certificates to users through the Company Portal.",
- "sMimeEnable": "Specify whether or not S/MIME controls are enabled when composing an email",
- "sMimeEnableAllowChange": "Specify if the user is allowed to change the Enable S/MIME setting.",
- "sMimeEncryptAllEmails": "Specify whether or not all emails must be encrypted.\nEncrypting converts data to cipher text so that only the intended recipient can read it.",
- "sMimeEncryptAllEmailsAllowChange": "Specify if the user is allowed to change the Encrypt all emails setting.",
- "sMimeEncryptionCertProfile": "Specify certificate profile for email encryption.",
- "sMimeSignAllEmails": "Specify whether or not all emails must be signed.\nA digital signature verifies the authenticity of the email and ensures that the contents are not tampered with in transit.",
- "sMimeSignAllEmailsAllowChange": "Specify if the user is allowed to change the Sign all emails setting.",
- "sMimeSigningCertProfile": "Specify certificate profile for email signing.",
- "sMimeUserNotificationType": "Method to notify users that they must open Company Portal to retrieve S/MIME certificates for Outlook."
- },
+ "Languages": {
+ "ar-aE": "Arabic (U.A.E.)",
+ "ar-bH": "Arabic (Bahrain)",
+ "ar-dZ": "Arabic (Algeria)",
+ "ar-eG": "Arabic (Egypt)",
+ "ar-iQ": "Arabic (Iraq)",
+ "ar-jO": "Arabic (Jordan)",
+ "ar-kW": "Arabic (Kuwait)",
+ "ar-lB": "Arabic (Lebanon)",
+ "ar-lY": "Arabic (Libya)",
+ "ar-mA": "Arabic (Morocco)",
+ "ar-oM": "Arabic (Oman)",
+ "ar-qA": "Arabic (Qatar)",
+ "ar-sA": "Arabic (Saudi Arabia)",
+ "ar-sY": "Arabic (Syria)",
+ "ar-tN": "Arabic (Tunisia)",
+ "ar-yE": "Arabic (Yemen)",
+ "az-cyrl": "Azerbaijani (Cyrillic, Azerbaijan)",
+ "az-latn": "Azerbaijani (Latin, Azerbaijan)",
+ "bn-bD": "Bangla (Bangladesh)",
+ "bn-iN": "Bangla (India)",
+ "bs-cyrl": "Bosnian (Cyrillic)",
+ "bs-latn": "Bosnian (Latin)",
+ "zh-cN": "Chinese (PRC)",
+ "zh-hK": "Chinese (Hong Kong S.A.R.)",
+ "zh-mO": "Chinese (Macao S.A.R.)",
+ "zh-sG": "Chinese (Singapore)",
+ "zh-tW": "Chinese (Taiwan)",
+ "hr-bA": "Croatian (Latin)",
+ "hr-hR": "Croatian (Croatia)",
+ "nl-bE": "Dutch (Belgium)",
+ "nl-nL": "Dutch (Netherlands)",
+ "en-aU": "English (Australia)",
+ "en-bZ": "English (Belize)",
+ "en-cA": "English (Canada)",
+ "en-cabn": "English (Caribbean)",
+ "en-iE": "English (Ireland)",
+ "en-iN": "English (India)",
+ "en-jM": "English (Jamaica)",
+ "en-mY": "English (Malaysia)",
+ "en-nZ": "English (New Zealand)",
+ "en-pH": "English (Republic of the Philippines)",
+ "en-sG": "English (Singapore)",
+ "en-tT": "English (Trinidad and Tobago)",
+ "en-uK": "English (United Kingdom)",
+ "en-uS": "English (United States)",
+ "en-zA": "English (South Africa)",
+ "en-zW": "English (Zimbabwe)",
+ "fr-bE": "French (Belgium)",
+ "fr-cA": "French (Canada)",
+ "fr-cH": "French (Switzerland)",
+ "fr-fR": "French (France)",
+ "fr-lU": "French (Luxembourg)",
+ "fr-mC": "French (Monaco)",
+ "de-aT": "German (Austria)",
+ "de-cH": "German (Switzerland)",
+ "de-dE": "German (Germany)",
+ "de-lI": "German (Liechtenstein)",
+ "de-lU": "German (Luxembourg)",
+ "iu-cans": "Inuktitut (Syllabics, Canada)",
+ "iu-latn": "Inuktitut (Latin, Canada)",
+ "it-cH": "Italian (Switzerland)",
+ "it-iT": "Italian (Italy)",
+ "ms-bN": "Malay (Brunei Darussalam)",
+ "ms-mY": "Malay (Malaysia)",
+ "mn-cN": "Mongolian (Traditional Mongolian, PRC)",
+ "mn-mN": "Mongolian (Cyrillic, Mongolia)",
+ "no-nB": "Norwegian, Bokmål (Norway)",
+ "no-nn": "Norwegian, Nynorsk (Norway)",
+ "pt-bR": "Portuguese (Brazil)",
+ "pt-pT": "Portuguese (Portugal)",
+ "quz-bO": "Quechua (Bolivia)",
+ "quz-eC": "Quechua (Ecuador)",
+ "quz-pE": "Quechua (Peru)",
+ "smj-nO": "Sami, Lule (Norway)",
+ "smj-sE": "Sami, Lule (Sweden)",
+ "se-fI": "Sami, Northern (Finland)",
+ "se-nO": "Sami, Northern (Norway)",
+ "se-sE": "Sami, Northern (Sweden)",
+ "sma-nO": "Sami, Southern (Norway)",
+ "sma-sE": "Sami, Southern (Sweden)",
+ "smn": "Sami, Inari (Finland)",
+ "sms": "Sami, Skolt (Finland)",
+ "sr-Cyrl-bA": "Serbian (Cyrillic)",
+ "sr-Cyrl-rS": "Serbian (Cyrillic, Serbia and Montenegro)",
+ "sr-Latn-bA": "Serbian (Latin)",
+ "sr-Latn-rS": "Serbian (Latin, Serbia)",
+ "dsb": "Lower Sorbian (Germany)",
+ "hsb": "Upper Sorbian (Germany)",
+ "es-es-tradnl": "Spanish (Spain, Traditional Sort)",
+ "es-aR": "Spanish (Argentina)",
+ "es-bO": "Spanish (Bolivia)",
+ "es-cL": "Spanish (Chile)",
+ "es-cO": "Spanish (Colombia)",
+ "es-cR": "Spanish (Costa Rica)",
+ "es-dO": "Spanish (Dominican Republic)",
+ "es-eC": "Spanish (Ecuador)",
+ "es-eS": "Spanish (Spain)",
+ "es-gT": "Spanish (Guatemala)",
+ "es-hN": "Spanish (Honduras)",
+ "es-mX": "Spanish (Mexico)",
+ "es-nI": "Spanish (Nicaragua)",
+ "es-pA": "Spanish (Panama)",
+ "es-pE": "Spanish (Peru)",
+ "es-pR": "Spanish (Puerto Rico)",
+ "es-pY": "Spanish (Paraguay)",
+ "es-sV": "Spanish (El Salvador)",
+ "es-uS": "Spanish (United States)",
+ "es-uY": "Spanish (Uruguay)",
+ "es-vE": "Spanish (Venezuela)",
+ "sv-fI": "Swedish (Finland)",
+ "uz-cyrl": "Uzbek (Cyrillic, Uzbekistan)",
+ "uz-latn": "Uzbek (Latin, Uzbekistan)",
+ "af": "Afrikaans (South Africa)",
+ "sq": "Albanian (Albania)",
+ "am": "Amharic (Ethiopia)",
+ "hy": "Armenian (Armenia)",
+ "as": "Assamese (India)",
+ "ba": "Bashkir (Russia)",
+ "eu": "Basque (Basque)",
+ "be": "Belarusian (Belarus)",
+ "br": "Breton (France)",
+ "bg": "Bulgarian (Bulgaria)",
+ "ca": "Catalan (Catalan)",
+ "co": "Corsican (France)",
+ "cs": "Czech (Czech Republic)",
+ "da": "Danish (Denmark)",
+ "dv": "Divehi (Maldives)",
+ "et": "Estonian (Estonia)",
+ "fo": "Faroese (Faroe Islands)",
+ "fil": "Filipino (Philippines)",
+ "fi": "Finnish (Finland)",
+ "gl": "Galician (Galician)",
+ "ka": "Georgian (Georgia)",
+ "el": "Greek (Greece)",
+ "gu": "Gujarati (India)",
+ "ha": "Hausa (Latin, Nigeria)",
+ "he": "Hebrew (Israel)",
+ "hi": "Hindi (India)",
+ "hu": "Hungarian (Hungary)",
+ "is": "Icelandic (Iceland)",
+ "ig": "Igbo (Nigeria)",
+ "id": "Indonesian (Indonesia)",
+ "ga": "Irish (Ireland)",
+ "xh": "isiXhosa (South Africa)",
+ "zu": "isiZulu (South Africa)",
+ "ja": "Japanese (Japan)",
+ "kn": "Kannada (India)",
+ "kk": "Kazakh (Kazakhstan)",
+ "km": "Khmer (Cambodia)",
+ "rw": "Kinyarwanda (Rwanda)",
+ "sw": "Kiswahili (Kenya)",
+ "kok": "Konkani (India)",
+ "ko": "Korean (Korea)",
+ "ky": "Kyrgyz (Kyrgyzstan)",
+ "lo": "Lao (Lao P.D.R.)",
+ "lv": "Latvian (Latvia)",
+ "lt": "Lithuanian (Lithuania)",
+ "lb": "Luxembourgish (Luxembourg)",
+ "mk": "Macedonian (North Macedonia)",
+ "ml": "Malayalam (India)",
+ "mt": "Maltese (Malta)",
+ "mi": "Maori (New Zealand)",
+ "mr": "Marathi (India)",
+ "moh": "Mohawk (Mohawk)",
+ "ne": "Nepali (Nepal)",
+ "oc": "Occitan (France)",
+ "or": "Odia (India)",
+ "ps": "Pashto (Afghanistan)",
+ "fa": "Persian",
+ "pl": "Polish (Poland)",
+ "pa": "Punjabi (India)",
+ "ro": "Romanian (Romania)",
+ "rm": "Romansh (Switzerland)",
+ "ru": "Russian (Russia)",
+ "sa": "Sanskrit (India)",
+ "st": "Sesotho sa Leboa (South Africa)",
+ "tn": "Setswana (South Africa)",
+ "si": "Sinhala (Sri Lanka)",
+ "sk": "Slovak (Slovakia)",
+ "sl": "Slovenian (Slovenia)",
+ "sv": "Swedish (Sweden)",
+ "syr": "Syriac (Syria)",
+ "tg": "Tajik (Cyrillic, Tajikistan)",
+ "ta": "Tamil (India)",
+ "tt": "Tatar (Russia)",
+ "te": "Telugu (India)",
+ "th": "Thai (Thailand)",
+ "bo": "Tibetan (PRC)",
+ "tr": "Turkish (Turkey)",
+ "tk": "Turkmen (Turkmenistan)",
+ "uk": "Ukrainian (Ukraine)",
+ "ur": "Urdu (Islamic Republic of Pakistan)",
+ "vi": "Vietnamese (Vietnam)",
+ "cy": "Welsh (United Kingdom)",
+ "wo": "Wolof (Senegal)",
+ "ii": "Yi (PRC)",
+ "yo": "Yoruba (Nigeria)"
+ },
+ "DisplayRoleTypes": {
+ "builtInRole": "Built-in Role",
+ "customCloudPCRole": "Custom Windows 365 role",
+ "customIntuneRole": "Custom Intune role",
+ "customRole": "Custom Role"
+ },
+ "AppRelationshipStatus": {
+ "Grid": {
+ "appVersion": "App Version",
+ "dependencyName": "Dependency name",
+ "lastModifiedTime": "Last modified time",
+ "relationship": "Relationship",
+ "replaced": "Replaced",
+ "searchPlaceholder": "Filter by app name",
+ "status": "Status details",
+ "statusDetails": "Status",
+ "supersedenceName": "Supersedence name"
+ },
+ "RelatedAppRelationship": {
+ "dependencyDescendants": "Child dependency",
+ "indirectSupersedence": "Not directly related",
+ "supersedenceAncestors": "Superseding",
+ "supersedenceDescendants": "Superseded"
+ },
+ "SupersededReplaced": {
+ "no": "No",
+ "yes": "Yes"
+ },
+ "Tabs": {
+ "chart": "Chart",
+ "dependency": "Dependency",
+ "label": "View: ",
+ "supersedence": "Supersedence",
+ "table": "Table"
+ },
+ "dependencyGraphAriaLabel": "App dependency chart",
+ "supersedenceGraphAriaLabel": "App supersedence chart"
+ },
+ "WindowsQualityUpdateProfile": {
+ "Details": {
+ "DaysUntilForcedReboot": {
+ "label": "Number of days to wait before restart is enforced"
+ },
+ "Description": {
+ "label": "Description"
+ },
+ "Name": {
+ "label": "Name"
+ },
+ "QualityUpdateRelease": {
+ "label": "Expedite installation of quality updates if device OS version less than:"
+ },
+ "bladeTitle": "Quality updates Windows 10 and later (preview)",
+ "loadError": "Loading failed!"
+ },
+ "TabName": {
+ "qualityUpdateSettings": "Settings"
+ },
+ "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
+ "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
+ "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ },
+ "Tooltips": {
+ "PolicySettings": {
+ "TouchId1": {
+ "android": "On Android, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "iOS": "On iOS/iPadOS devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts.",
+ "mac": "On Mac devices, you can allow using fingerprint identification instead of a PIN. Users are prompted to provide their fingerprints when they access this app with their work accounts."
+ },
+ "allowWidgetContentSync": "Choose Block to prevent policy managed apps from saving data to app widgets. If you choose Allow, the policy managed app can save data to app widgets, if those features are supported and enabled within the policy managed app. \n\n \n\nApps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "appSharingFromLevel1": "Select one of the following options to specify the apps that this app can receive data from:",
+ "appSharingFromLevel2": "{0}: Only allow receiving data in org documents or accounts from other policy managed apps",
+ "appSharingFromLevel3": "{0}: Allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel4": "{0}: Do not allow receiving data in org documents or accounts from any app",
+ "appSharingFromLevel5": "{0}: Allow data transfer from any app and treat all incoming data without an user identity as Org data.",
+ "appSharingToLevel1": "Select one of the following options to specify the apps that this app can send data to:",
+ "appSharingToLevel2": "{0}: Only allow sending org data to other policy managed apps",
+ "appSharingToLevel3": "{0}: Allow sending org data to any app",
+ "appSharingToLevel4": "{0}: Do not allow sending org data to any app",
+ "appSharingToLevel5": "{0}: Only allow transfer only to other policy managed apps and file transfer to other MDM managed apps on enrolled devices",
+ "appSharingToLevel6": "{0}: Allow transfer only to other policy managed apps and filter OS Open-in/Share dialogs to only display policy managed apps",
+ "assignmentFilterEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "assignmentFilterEdit2": "Learn more about assigning App Protection policies.",
+ "conditionalEncryption1": "Select {0} to disable app encryption for internal app storage when device encryption is detected on an enrolled device.",
+ "conditionalEncryption2": "Note: Intune can only detect device enrollment with Intune MDM. External app storage will still be encrypted to ensure data cannot be accessed by unmanaged applications.",
+ "contactSyncMac": "If disabled, apps cannot save contacts to the native address book.",
+ "contactsSync": "Choose Block to prevent policy managed apps from saving data to the device's native apps (like Contacts, Calendar and widgets), or to prevent the use of add-ins within the policy managed apps. If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.
Apps may provide additional configuration capability with app configuration policies. For more information, see the app's documentation.",
+ "deviceTypeTargetingCreate1": "Device type targeting has moved to the Assignments step in policy creation.",
+ "deviceTypeTargetingEdit1": "If you apply assignment filters to this policy, the 'Device Management Type' property will apply in addition to the values specified for 'Target to apps on all device types' and 'Device types' on the 'Apps' page.",
+ "deviceTypeTargetingEdit2": "To edit device management type targeting, reset 'Target to apps on all device types' = 'Yes'. Then create a MAM assignment filter with the desired values for 'Device Management Type'.",
+ "deviceTypeTargetingHasMoved": "Learn more about assigning App Protection Policies",
+ "encryptionAndroid1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Android use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "encryptionAndroid2": "When you require encryption in your app policy, the end-user is required to setup and use a PIN to access their device. If there is not a PIN set up for device access, the apps will not launch and the end-user will instead see a message, which says, “Your company has required that you must first enable a device PIN to access this application.\"",
+ "encryptionMac1": "For apps that are associated with an Intune mobile application management policy, encryption is provided by Microsoft. Data is encrypted synchronously during file I/O operations according to the setting in the mobile application management policy. Managed apps on Mac use AES-128 encryption in CBC mode utilizing the platform cryptography libraries. The encryption method is not FIPS 140-2 compliant. SHA-256 encryption is supported as an explicit instruction using the SigAlg parameter and will only work on devices 4.2 and above. Content on the device storage is always be encrypted.",
+ "faceId1": "Where applicable, you can allow the use of face identification instead of PIN. Users are prompted to provide face identification when they access this app with their work accounts.",
+ "faceId2": "Select Yes to allow face identification instead of a PIN for app access.",
+ "managementLevelsAndroid1": "Use this option to specify whether this policy applies to Android device administrator devices, Android Enterprise devices, or unmanaged devices.",
+ "managementLevelsAndroid2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsAndroid3": "{0}: Intune-managed devices using the Android Device Administration API.",
+ "managementLevelsAndroid4": "{0}: Intune-managed devices using Android Enterprise Work Profiles or Android Enterprise Full Device Management.",
+ "managementLevelsIos1": "Use this option to specify whether this policy applies to MDM managed devices or unmanaged devices.",
+ "managementLevelsIos2": "{0}: Unmanaged devices are devices where Intune MDM management has not been detected. This includes 3rd party MDM vendors.",
+ "managementLevelsIos3": "{0}: Managed devices are managed by Intune MDM.",
+ "minAppVersion": "Define the required minimum App version number that a user should have to gain secure access to the app.",
+ "minAppVersionWarning": "Define the recommended minimum App version number that a user should have for secure access to the app.",
+ "minOsVersion": "Define the required minimum OS version number that a user should have to gain secure access to the app.",
+ "minOsVersionWarning": "Define the recommended minimum OS version number that a user should have to gain secure access to the app.",
+ "minPatchVersion": "Define the oldest required Android security patch level a user can have to gain secure access to the app.",
+ "minPatchVersionWarning": "Define the oldest recommended Android security patch level a user can have for secure access to the app.",
+ "minSdkVersion": "Define the required minimum Intune Application Protection Policy SDK version that a user should have to gain secure access to the app.",
+ "requireAppPinDefault": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
",
+ "targetAllApps1": "Use this option to target your policy to apps on devices of any management state.",
+ "targetAllApps2": "During policy conflict resolution this setting will be superseded if a user has policy targeted for a specific management state.",
+ "touchId2": "Select {0} to require fingerprint identity instead of a PIN for app access."
+ },
+ "Tap": {
+ "pinResetAfterNumberOfDays": "Specify the number of days that must pass before the user must reset the PIN.",
+ "previousPinBlockCount": "This setting specifies the number of previous PINs that Intune will maintain. Any new PINs must be different from those that Intune is maintaining."
+ },
+ "WipPolicySettings": {
+ "25": "",
+ "allowWindowsSearch": "This will allow Windows Search to continue to search through encrypted data.",
+ "authoritativeIpRanges": "Enable this setting if you want to override Windows auto-detection of IP ranges.",
+ "authoritativeProxyServers": "Enable this setting if you want to override Windows auto-detection of proxy servers.",
+ "checkInput": "Check input for validity",
+ "dataRecoveryCert": "A recovery certificate is a special Encrypting File System (EFS) certificate you can use to recover encrypted files if your encryption key is lost or damaged. You need to create the recovery certificate, and specify it here. More information is here",
+ "enterpriseCloudResources": "
Specify cloud resources to be treated as corporate and be protected with Windows Information Protection policy. Multiple resources can be specified by separating individual entries with the '|' character.
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources you specified will be routed.
URL[,Proxy]|URL[,Proxy]
Without proxy: contoso.sharepoint.com|contoso.visualstudio.com With proxy: contoso.sharepoint.com,proxy.contoso.com|contoso.visualstudio.com,proxy.contoso.com
",
+ "enterpriseIPv4Ranges": "
Specify the IPv4 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
This setting is required to have Windows Information Protection enabled.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 3.4.0.1-3.4.255.255,192.168.1.1-192.168.255.255
",
+ "enterpriseIPv6Ranges": "
Specify the IPv6 ranges that form your corporate network. These are used in conjunction with the Enterprise Network Domain Names that you specify to define your corporate network boundary.
Multiple ranges can be specified by separating individual entries with a comma.
For example: 2001:4898:dc05::-2001:4898:dc05:ffff:ffff:ffff:ffff:ffff,2a01:110::-2a01:110:7fff:ffff:ffff:ffff:ffff:ffff
",
+ "enterpriseInternalProxyServers": "
If you have a proxy configured in your company, then you can specify the proxy through which traffic to cloud resources specified in the Enterprise Cloud Resources settings are to be routed.
Multiple values can be specified by separating individual entries with a semi-colon.
For example: contoso.internalproxy1.com;contoso.internalproxy2.com
",
+ "enterpriseNetworkDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a comma.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com,region.contoso.com
",
+ "enterpriseProtectedDomainNames": "
Specify the DNS names that form your corporate network. These are used in conjunction with the IP ranges that you specify to define your corporate network boundary. Multiple values can be specified by separating individual entries with a '|'.
This setting is required to have Windows Information Protection enabled.
For example: corp.contoso.com|region.contoso.com
",
+ "enterpriseProxyServers": "
If you have external facing proxies in your corporate network, specify them here. When specifying a proxy server address, you should also specify the port through which traffic should be allowed and protected through Windows Information Protection.
Note: This list must not include servers in your Enterprise Internal Proxy Server list. Multiple values can be specified by separating individual entries with a semi-colon.
For example: proxy.contoso.com:80;proxy2.contoso.com:80
",
+ "maxInactivityTime1": "Specifies the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. Users can select any existing timeout value less than the specified maximum time in the Settings app. Note the Lumia 950 and 950XL have a maximum timeout value of 5 minutes, regardless of the value set by this policy.",
+ "maxInactivityTime2": "0 (default) - No timeout is defined. The default of '0' is interpreted as 'No timeout is defined.'",
+ "maxPasswordAttempts1": "This policy has different behaviors on the mobile device and desktop.",
+ "maxPasswordAttempts2": "On a mobile device, when the user reaches the value set by this policy, then the device is wiped.",
+ "maxPasswordAttempts3": "On a desktop, when the user reaches the value set by this policy, it is not wiped.Instead, the desktop is put on BitLocker recovery mode, which makes the data inaccessible but recoverable.If BitLocker is not enabled, then the policy cannot be enforced.",
+ "maxPasswordAttempts4": "Prior to reaching the failed attempts limit, the user is sent to the lock screen and warned that more failed attempts will lock their computer.When the user reaches the limit, the device automatically reboots and shows the BitLocker recovery page.This page prompts the user for the BitLocker recovery key.",
+ "maxPasswordAttempts5": "0 (default) - The device is never wiped after an incorrect PIN or password is entered.",
+ "maxPasswordAttempts6": "Most secure value is 0 if all policy values = 0; otherwise, Min policy value is the most secure value.",
+ "mdmDiscoveryUrl": "Specify the URL for the MDM enrollment endpoint that users who enroll to MDM will use. By default, this is specified for Intune.",
+ "minimumPinLength1": "Integer value that sets the minimum number of characters required for the PIN. Default value is 4. The lowest number you can configure for this policy setting is 4. The largest number you can configure must be less than the number configured in the Maximum PIN length policy setting or the number 127, whichever is the lowest.",
+ "minimumPinLength2": "If you configure this policy setting, the PIN length must be greater than or equal to this number. If you disable or do not configure this policy setting, the PIN length must be greater than or equal to 4.",
+ "name": "The name of this network boundary",
+ "neutralResources": "
If you have authentication redirection endpoints in your company, specify those here. The locations specified here are considered to be either personal or corporate depending on the context of the connection prior to the redirection.
Multiple values can be specified by separating individual entries with a comma.
For example: sts.contoso.com,sts.contoso2.com
",
+ "passportForWork1": "Value that sets Windows Hello for Business as a method for signing into Windows.",
+ "passportForWork2": "Default value is true.If you set this policy to false, the user cannot provision Windows Hello for Business except on Microsoft Entra joined mobile phones where provisioning is required.",
+ "pinExpiration": "The largest number you can configure for this policy setting is 730. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then the user’s PIN will never expire.",
+ "pinHistory1": "The largest number you can configure for this policy setting is 50. The lowest number you can configure for this policy setting is 0. If this policy is set to 0, then storage of previous PINs is not required.",
+ "pinHistory2": "The current PIN of the user is included in the set of PINs associated with the user account. PIN history is not preserved through a PIN reset.",
+ "protectUnderLock": "Protects app content while the device is in a locked state.",
+ "protectionModeBlock": "
Block: Blocks enterprise data from leaving protected apps.
",
+ "protectionModeOff": "
Off: User is free to relocate data off of protected apps. No actions are logged.
",
+ "protectionModeOverride": "
Allow overrides: User is prompted when attempting to relocate data from a protected to a non-protected app. If they choose to override this prompt, the action will be logged.
",
+ "protectionModeSilent": "
Silent: User is free to relocate data off of protected apps. These actions are logged.
",
+ "required": "Required",
+ "revokeOnMdmHandoff": "Added in Windows 10, version 1703. This policy controls whether to revoke the WIP keys when a device upgrades from MAM to MDM. If set to “Off”, the keys will not be revoked and the user will continue to have access to protected files after upgrade. This is recommended if the MDM service is configured with the same WIP EnterpriseID as the MAM service.",
+ "revokeOnUnenroll": "This will cause encryption keys to be revoked when a device un-enrolls from this policy.",
+ "rmsTemplateForEdp": "TemplateID GUID to use for RMS encryption. The Azure RMS template allows the IT admin to configure the details about who has access to RMS-protected file and how long they have access.",
+ "showWipIcon": "This will let the user know when they are acting in a corporate context, by overlaying an icon.",
+ "useRmsForWip": "Specifies whether to allow Azure RMS encryption for WIP."
+ },
+ "requireAppPin": "
Select Yes to disable the app PIN when a device lock is detected on an enrolled device.
Note: Intune cannot detect device enrollment with a third-party EMM solution on iOS/iPadOS.
"
+ },
+ "CustomComplianceScript": {
+ "CustomScriptWizardTitle": {
+ "create": "Create custom script",
+ "edit": "Edit custom script"
+ },
+ "basicInfo": "Create a new custom script package from detection and remediation scripts that you've written.",
+ "customScriptCapitalized": "Custom script",
+ "customScriptLowercase": "custom script",
+ "detectionScript": "Detection script"
+ },
+ "Assignment": {
+ "AutoUpdateMode": {
+ "default": "Default",
+ "header": "Update Priority",
+ "postponed": "Postponed",
+ "priority": "High Priority"
+ },
+ "AutoUpdateSupersededApps": {
+ "label": "Auto-update",
+ "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
+ },
+ "DeliveryOptimizationPriority": {
+ "backgroundNormal": "Background",
+ "displayText": "Content download in {0}",
+ "foreground": "Foreground",
+ "header": "Delivery optimization priority"
+ },
+ "RestartGracePeriod": {
+ "allowSnooze": "Allow user to snooze the restart notification",
+ "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
+ "durationInMinutes": "Device restart grace period (minutes)",
+ "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
+ },
+ "SoftwareInstallationTime": {
+ "TimeZone": {
+ "label": "Time zone",
+ "local": "Device time zone",
+ "utc": "UTC"
+ },
+ "dateAndTimeLabel": "Date and time",
+ "deadlineTimeColumnLabel": "Installation deadline",
+ "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
+ "deadlineTimeLabel": "App installation deadline",
+ "defaultTime": "As soon as possible",
+ "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
+ "specificTime": "A specific date and time",
+ "startTimeColumnLabel": "Availability",
+ "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
+ "startTimeLabel": "App availability"
+ },
+ "restartGracePeriodHeader": "Restart grace period",
+ "restartGracePeriodLabel": "Device restart grace period",
+ "summaryTitle": "End user experience"
+ },
"WindowsManagement": {
"Assignment": {
"noAssignmentCustomAttributeDisplayText": "Assign custom attribute to at least one group. Go to Properties to edit assignments.",
@@ -1860,7 +4664,171 @@
"shellScriptObjectName": "Shell script",
"successfullySavedPolicy": "Saved {0}"
},
+ "ArchitectureOptions": {
+ "sixtyFourBit": "64-bit",
+ "thirtyTwoBit": "32-bit"
+ },
+ "Countries": {
+ "ae": "United Arab Emirates",
+ "ag": "Antigua and Barbuda",
+ "ai": "Anguilla",
+ "al": "Albania",
+ "am": "Armenia",
+ "ao": "Angola",
+ "ar": "Argentina",
+ "at": "Austria",
+ "au": "Australia",
+ "az": "Azerbaijan",
+ "bb": "Barbados",
+ "be": "Belgium",
+ "bf": "Burkina Faso",
+ "bg": "Bulgaria",
+ "bh": "Bahrain",
+ "bj": "Benin",
+ "bm": "Bermuda",
+ "bn": "Brunei",
+ "bo": "Bolivia",
+ "br": "Brazil",
+ "bs": "Bahamas",
+ "bt": "Bhutan",
+ "bw": "Botswana",
+ "by": "Belarus",
+ "bz": "Belize",
+ "ca": "Canada",
+ "cg": "Republic Of Congo",
+ "ch": "Switzerland",
+ "cl": "Chile",
+ "cn": "China",
+ "co": "Colombia",
+ "cr": "Costa Rica",
+ "cv": "Cape Verde",
+ "cy": "Cyprus",
+ "cz": "Czech Republic",
+ "de": "Germany",
+ "dk": "Denmark",
+ "dm": "Dominica",
+ "do": "Dominican Republic",
+ "dz": "Algeria",
+ "ec": "Ecuador",
+ "ee": "Estonia",
+ "eg": "Egypt",
+ "es": "Spain",
+ "fi": "Finland",
+ "fj": "Fiji",
+ "fm": "Federated States Of Micronesia",
+ "fr": "France",
+ "gb": "United Kingdom",
+ "gd": "Grenada",
+ "gh": "Ghana",
+ "gm": "Gambia",
+ "gr": "Greece",
+ "gt": "Guatemala",
+ "gw": "Guinea-Bissau",
+ "gy": "Guyana",
+ "hk": "Hong Kong",
+ "hn": "Honduras",
+ "hr": "Croatia",
+ "hu": "Hungary",
+ "id": "Indonesia",
+ "ie": "Ireland",
+ "il": "Israel",
+ "in": "India",
+ "is": "Iceland",
+ "it": "Italy",
+ "jm": "Jamaica",
+ "jo": "Jordan",
+ "jp": "Japan",
+ "ke": "Kenya",
+ "kg": "Kyrgyzstan",
+ "kh": "Cambodia",
+ "kn": "St. Kitts and Nevis",
+ "kr": "Republic Of Korea",
+ "kw": "Kuwait",
+ "ky": "Cayman Islands",
+ "kz": "Kazakstan",
+ "la": "Lao People’s Democratic Republic",
+ "lb": "Lebanon",
+ "lc": "St. Lucia",
+ "lk": "Sri Lanka",
+ "lr": "Liberia",
+ "lt": "Lithuania",
+ "lu": "Luxembourg",
+ "lv": "Latvia",
+ "md": "Republic Of Moldova",
+ "mg": "Madagascar",
+ "mk": "North Macedonia",
+ "ml": "Mali",
+ "mn": "Mongolia",
+ "mo": "Macau",
+ "mr": "Mauritania",
+ "ms": "Montserrat",
+ "mt": "Malta",
+ "mu": "Mauritius",
+ "mw": "Malawi",
+ "mx": "Mexico",
+ "my": "Malaysia",
+ "mz": "Mozambique",
+ "na": "Namibia",
+ "ne": "Niger",
+ "ng": "Nigeria",
+ "ni": "Nicaragua",
+ "nl": "Netherlands",
+ "no": "Norway",
+ "np": "Nepal",
+ "nz": "New Zealand",
+ "om": "Oman",
+ "pa": "Panama",
+ "pe": "Peru",
+ "pg": "Papua New Guinea",
+ "ph": "Philippines",
+ "pk": "Pakistan",
+ "pl": "Poland",
+ "pt": "Portugal",
+ "pw": "Palau",
+ "py": "Paraguay",
+ "qa": "Qatar",
+ "ro": "Romania",
+ "ru": "Russia",
+ "sa": "Saudi Arabia",
+ "sb": "Solomon Islands",
+ "sc": "Seychelles",
+ "se": "Sweden",
+ "sg": "Singapore",
+ "si": "Slovenia",
+ "sk": "Slovakia",
+ "sl": "Sierra Leone",
+ "sn": "Senegal",
+ "sr": "Suriname",
+ "st": "Sao Tome and Principe",
+ "sv": "El Salvador",
+ "sz": "Swaziland",
+ "tc": "Turks and Caicos",
+ "td": "Chad",
+ "th": "Thailand",
+ "tj": "Tajikistan",
+ "tm": "Turkmenistan",
+ "tn": "Tunisia",
+ "tr": "Turkey",
+ "tt": "Trinidad and Tobago",
+ "tw": "Taiwan",
+ "tz": "Tanzania",
+ "ua": "Ukraine",
+ "ug": "Uganda",
+ "us": "United States",
+ "uy": "Uruguay",
+ "uz": "Uzbekistan",
+ "vc": "St. Vincent and The Grenadines",
+ "ve": "Venezuela",
+ "vg": "British Virgin Islands",
+ "vn": "Vietnam",
+ "ye": "Yemen",
+ "za": "South Africa",
+ "zw": "Zimbabwe"
+ },
"SettingDetails": {
+ "CustomOMA": {
+ "noDCv2Allow": "This setting is not configurable via OMA-URI, as it is available in the settings catalog. Please navigate to the settings catalog to configure this setting."
+ },
"CustomPolicyConfigurationProfile": {
"uploadControlPlaceHolderText": "Select a configuration profile file"
},
@@ -3365,6 +6333,36 @@
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderDescriptionMac": "These settings work for devices that were enrolled with or without user approval through device enrollment, and for devices enrolled with automated device enrollment (formerly DEP).",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderName": "Device enrollment and automated device enrollment",
"deviceEnrollmentAndAutomatedDeviceEnrollmentHeaderNameMac": "Device enrollment and automated device enrollment",
+ "deviceExperienceTypeConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
+ "deviceExperienceTypeDescription": "Based on the experience you want to configure, select Kiosk Mode or Microsoft Launcher to start configuring the experience on your devices. If you don't select a device experience type, users will see the device's default home screen experience.",
+ "deviceExperienceTypeKioskMode": "Kiosk mode (dedicated and fully managed)",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
+ "deviceExperienceTypeMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
+ "deviceExperienceTypeMicrosoftLauncher": "Microsoft launcher (fully managed only)",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
+ "deviceExperienceTypeMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureDockPresenceShow": "Show",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
+ "deviceExperienceTypeMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
+ "deviceExperienceTypeMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
+ "deviceExperienceTypeName": "Device experience type",
"deviceGuardCredentialGuardDescription": "Enabling with UEFI lock ensures that Credential Guard cannot be remotely disabled. Enabling without UEFI lock allows Credential Guard to be disabled remotely via Group Policy.",
"deviceGuardCredentialGuardName": "Credential Guard",
"deviceIdOption": "Intune Device ID",
@@ -3847,36 +6845,6 @@
"engagedRestartTransitionScheduleDescription": "Number of days before transitioning from Auto Restarts scheduled outside of active hours to Engaged Restart, which requires the user to schedule.",
"engagedRestartTransitionScheduleName": "Transition users to engaged restart after an auto-restart (days)",
"enhancedOption": "Enhanced (1903 and earlier)",
- "enrollmentProfileTypeDedicatedDevice": "Dedicated device",
- "enrollmentProfileTypeDescription": "Select an enrollment profile type to start configuring Microsoft Launcher or Microsoft Managed Home Screen on your devices. If you don't select a profile type, users will see the device's default home screen experience.",
- "enrollmentProfileTypeFullyManaged": "Fully managed",
- "enrollmentProfileTypeFullyManagedConfigureMicrosoftLauncher": "Configure Microsoft Launcher on your fully managed devices.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultDescription": "Use Microsoft Launcher to customize the home screen experience on your org's managed devices. If you make Launcher the default, device users won't be able to use another launcher.",
- "enrollmentProfileTypeFullyManagedMakeMicrosoftLauncherDefaultName": "Make Microsoft Launcher the default launcher",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyDescription": "Users will not be able to change the wallpaper unless you allow them to. This setting is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperAllowUserModifyName": "Allow user to modify wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperDescription": "Lets you apply your own image as the home screen wallpaper and choose if the user can change it. If you don't configure a custom wallpaper, the device will keep its current wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperName": "Configure custom wallpaper",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlDescription": "This image will be appear as the wallpaper on the device home screen. This field is only available if you configure a custom wallpaper.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlEmptyValueKey": "http://www.contoso.com/img.jpg",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureCustomWallpaperUrlName": "Enter URL of wallpaper image",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceDisabled": "Disabled",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureDockPresenceShow": "Show",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyDescription": "If you allow the user to change the dock's presence, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you configure the dock's presence.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceAllowUserModifyName": "Allow user to change dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceDescription": "The dock is a menu that gives device users quick access to their apps and tools. When it's hidden, users must swipe up to access it.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherDockPresenceName": "Dock presence",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyDescription": "If you allow the user to enable/disable the feed, the previous setting will be enforced for the initial deployment. For subsequent deployments, the setting will not be enforced to respect any changes the user may have made. This setting is only available if you enable the launcher feed.",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedAllowUserModifyName": "Allow user to enable/disable feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedDescription": "The feed is an additional screen to the right of the home screen where device users can access their calendars, documents, and recent activities. If you don't enable it, it will remain disabled. ",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherFeedName": "Enable launcher feed",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementDescription": "",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureEnableLauncherSearchBarPlacementName": "Search bar placement",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementBottom": "Bottom",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementHide": "Hide",
- "enrollmentProfileTypeFullyManagedMicrosoftLauncherConfigureSearchBarPlacementTop": "Top",
- "enrollmentProfileTypeName": "Enrollment profile type",
"enrollmentSettingsHeading": "Enrollment Settings",
"enterOnlyOneForDns": "Enter a list of DNS servers and/or a proxy server.",
"enterpriseModeLoggingExample": "e.g. http://DC1/log.asp",
@@ -4151,6 +7119,8 @@
"fullyManagedAndCorporateOwnedWorkProfileAndroidEnrollmentTypesHeaderName": "Fully managed and corporate-owned work profile devices",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderDescription": "These settings only work for fully managed and dedicated devices.",
"fullyManagedAndDedicatedAndroidEnrollmentTypesHeaderName": "Fully managed and dedicated devices",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderDescription": "These settings only work for fully managed and dedicated devices operating with a kiosk policy.",
+ "fullyManagedAndDedicatedAndroidEnrollmentTypesWithKioskHeaderName": "Fully managed and dedicated devices (kiosk mode only)",
"gameCenterBlockedMacDescription": "Yes disables Game Center, and the Game Center icon is removed from the Home screen. Available for devices running macOS versions 10.13 or later.",
"gameCenterBlockedMacName": "Block Game Center",
"gamingPageDescription": "Block access to Gaming in Settings app.",
@@ -4542,6 +7512,7 @@
"kioskSelectionUsersDescription": "Configures the logon type to access the applications on this kiosk device.",
"kioskShowTaskbarDesc": "Show or hide the Windows taskbar on the kiosk.",
"kioskShowTaskbarName": "Windows Taskbar",
+ "kioskSingleInfoBoxText": "Single app kiosk mode – Locks the device to run the selected app. To use this mode, you must first approve and assign the selected app from the client apps workload. On fully managed devices, the only selected app that will apply is Managed Home Screen. All other apps will be treated as a required app instead.",
"kioskStartDateTime": "Maintenance Window Start Time",
"kioskStartMenuLayoutXmlDesc": "Provide an XML layout that defines in what order apps should be displayed on the Start Menu",
"kioskStartMenuLayoutXmlDescV2": "Importing an XML file configuring the Start layout overrides the existing display order and tile size selections. Learn more",
@@ -5214,6 +8185,7 @@
"mustBeAValidFilePath": "Must be a valid file path",
"mustBeAValidHttpsUrl": "Must be a valid https url",
"mustBeAValidIPAddress": "Must be a valid IP address (e.g. 192.168.0.1 or 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
+ "mustBeAValidIPOrFQDNWithOptionalPortNumber": "Value must be a valid IP address or FQDN with optional port number.",
"mustBeAValidIPv4Address": "Must be a valid IPv4 address (e.g. 192.168.0.1)",
"mustBeAValidIPv6Address": "Must be a valid IPv6 address (e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)",
"mustBeAValidImageUrl": "Must be a valid image URL such as www.contoso.com/image.jpg",
@@ -5725,9 +8697,12 @@
"publicLocalStoreSummaryLabel": "Windows Firewall rules from the local store (Public networks)",
"publicNetworkName": "Public (non-discoverable) network",
"publicOutboundConnectionsSummaryLabel": "Default action for outbound connections (Public networks)",
- "publicPlayStoreEnabledDescription": "Users get access to all apps, except the ones you’ve required uninstall in Client Apps. If you choose \"Not configured\" for this setting, users can only access the apps you’ve listed as available or required in Client Apps.",
+ "publicPlayStoreEnabledDescription": "If you select \"Allow\", users get access to all apps, except the ones you've required uninstall in Client Apps. If you choose \"Block\" or \"Not configured\" for this setting, users can only access the apps you've listed as available or required in Client Apps.",
"publicPlayStoreEnabledName": "Allow access to all apps in Google Play store",
- "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Not configured\", all apps not explicitly allowed for the user will be removed from the device.",
+ "publicPlayStoreEnabledWarning": "If you select \"Allow\", users are able to install any apps from the Google Play Store. If you later change your selection to \"Block\" or \"Not configured\", all apps will be removed from the device, except apps you've listed as available or required in Client Apps.",
+ "publicPlayStoreSelectionAllowList": "Block",
+ "publicPlayStoreSelectionBlockList": "Allow",
+ "publicPlayStoreSelectionNotConfigured": "Not configured",
"publicShieldedSummaryLabel": "Shielded (Public networks)",
"publicStealthModeSummaryLabel": "Stealth mode (Public networks)",
"publicUnicastResponsesToMulticastBroadcastsSummaryLabel": "Unicast responses to multicast broadcasts (Public networks)",
@@ -8179,1670 +11154,87 @@
"licenseTypeDevice": "Device",
"licenseTypeUser": "User"
},
- "ApplicabilityRules": {
- "GridLabel": {
- "property": "Property",
- "rule": "Rule",
- "ruleDetails": "Rule Details",
- "value": "Value"
- },
- "assignIf": "Assign profile if",
- "deleteWarning": "This will delete the selected Applicability Rule",
- "dontAssignIf": "Don't assign profile if",
- "editionDisplayText": "{0} {1}",
- "editionDisplayTextMore": "and {0} more",
- "instructions": "Specify how to apply this profile within an assigned group. Intune will only apply the profile to devices that meet the combined criteria of these rules.",
- "maxText": "Max",
- "minText": "Min",
- "noActionRow": "No Applicability Rules Specified",
- "oSVersion": "e.g. 1.2.3.4",
- "toText": "to",
- "windows10Education": "Windows 10/11 Education",
- "windows10EducationN": "Windows 10/11 Education N",
- "windows10Enterprise": "Windows 10/11 Enterprise",
- "windows10EnterpriseN": "Windows 10/11 Enterprise N",
- "windows10HolographicEnterprise": "Windows 10 Holographic for Business",
- "windows10Home": "Windows 10/11 Home",
- "windows10HomeChina": "Windows 10 Home China",
- "windows10HomeN": "Windows 10/11 Home N",
- "windows10HomeSingleLanguage": "Windows 10/11 Home Single Language",
- "windows10IoTCore": "Windows 10 IoT Core",
- "windows10IoTCoreCommercial": "Windows 10 IoT Core Commercial",
- "windows10Mobile": "Windows 10 Mobile",
- "windows10MobileEnterprise": "Windows 10 Mobile Enterprise",
- "windows10OsEdition": "OS edition",
- "windows10OsVersion": "OS version",
- "windows10Professional": "Windows 10/11 Professional",
- "windows10ProfessionalEducation": "Windows 10/11 Professional Education",
- "windows10ProfessionalEducationN": "Windows 10/11 Professional Education N",
- "windows10ProfessionalN": "Windows 10 Professional N",
- "windows10ProfessionalWorkstation": "Windows 10/11 Professional Workstation",
- "windows10ProfessionalWorkstationN": "Windows 10/11 Professional Workstation N",
- "windows11CloudEdition": "Windows 11 SE",
- "windows11CloudEditionN": "Windows 11 SE N"
- },
- "DetectionRules": {
- "ComparisonOperators": {
- "equals": "Equals",
- "greaterThan": "Greater than",
- "greaterThanOrEqualTo": "Greater than or equal to",
- "lessThan": "Less than",
- "lessThanOrEqualTo": "Less than or equal to",
- "notEqualTo": "Not equal to"
- },
- "CustomScript": {
- "enforceSignatureCheck": "Enforce script signature check and run script silently",
- "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
- "header": "Use a custom detection script",
- "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
- "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileNotSelectedValidation": "No script file is selected.",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
- "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
- },
- "Manual": {
- "FileRule": {
- "DetectionMethodOptions": {
- "dateCreated": "Date created",
- "dateModified": "Date modified",
- "doesNotExist": "File or folder does not exist",
- "fileOrFolderExists": "File or folder exists",
- "sizeInMB": "Size in MB",
- "version": "String (version)"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "fileOrFolder": "File or folder",
- "fileOrFolderToolTip": "The file or folder to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "path": "Path",
- "pathTooltip": "The full path of the folder containing the file or folder to detect.",
- "value": "Value",
- "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
- },
- "GridColumns": {
- "pathOrCode": "Path/Code",
- "type": "Type"
- },
- "MsiRule": {
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
- "productCode": "MSI product code",
- "productCodeTooltip": "A valid MSI product code for the app.",
- "productVersion": "Value",
- "productVersionCheck": "MSI product version check",
- "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
- "productVersionTooltip": "Enter the MSI product version for the app."
- },
- "RegistryRule": {
- "DetectionMethodOptions": {
- "integerComparison": "Integer comparison",
- "keyDoesNotExist": "Key does not exist",
- "keyExists": "Key exists",
- "stringComparison": "String comparison",
- "valueDoesNotExist": "Value does not exist",
- "valueExists": "Value exists",
- "versionComparison": "Version comparison"
- },
- "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
- "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
- "detectionMethod": "Detection method",
- "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
- "value": "Value",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the registry value to detect.",
- "valueTooltip": "Select a value that matches the selected detection method."
- },
- "RuleTypeOptions": {
- "file": "File",
- "mSI": "MSI",
- "registry": "Registry"
- },
- "gridAriaLabel": "Detection Rules",
- "header": "Create a rule that indicates the presence of the app.",
- "noRulesSelectedPlaceholder": "No rules are specified.",
- "ruleTableLimit": "You can add up to 25 detection rules",
- "ruleType": "Rule type",
- "ruleTypeTooltip": "Choose the type of detection rule to add."
- },
- "RuleConfigurationOptions": {
- "customScript": "Use a custom detection script",
- "manual": "Manually configure detection rules"
- },
- "bladeTitle": "Detection rules",
- "header": "Configure app specific rules used to detect the presence of the app.",
- "rulesFormat": "Rules format",
- "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
- "selectorLabel": "Detection rules"
+ "BooleanActions": {
+ "allow": "Allow",
+ "block": "Block",
+ "configured": "Configured",
+ "disable": "Disable",
+ "dontRequire": "Don't Require",
+ "enable": "Enable",
+ "hide": "Hide",
+ "limit": "Limit",
+ "notConfigured": "Not configured",
+ "require": "Require",
+ "show": "Show",
+ "yes": "Yes"
},
- "PolicyType": {
- "EdgeSmartScreenSettings": {
- "description": "Microsoft Edge app recommended SmartScreen settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "EndpointDetectionandResponse": {
- "mDE": "Endpoint detection and response"
- },
- "EndpointSecurityTemplate": {
- "aSRAppBrowserSecurity": "App and browser isolation",
- "aSRApplicationControl": "Application control",
- "aSRAttackSurfaceReduction": "Attack surface reduction rules",
- "aSRDeviceControl": "Device control",
- "aSRExploitProtection": "Exploit protection",
- "aSRWebProtection": "Web protection (Microsoft Edge Legacy)",
- "aVExclusions": "Microsoft Defender Antivirus exclusions",
- "antivirus": "Microsoft Defender Antivirus",
- "cloudPC": "Windows 365 Security Baseline",
- "default": "Endpoint Security",
- "defenderTest": "Microsoft Defender for Endpoint demo",
- "diskEncryption": "BitLocker",
- "eDR": "Endpoint detection and response",
- "edgeSecurityBaseline": "Microsoft Edge baseline",
- "edgeSecurityBaselinePreview": "Preview: Microsoft Edge baseline",
- "editionUpgradeConfiguration": "Edition upgrade and mode switch",
- "firewall": "Windows Firewall",
- "firewallRules": "Windows Firewall rules",
- "identityProtection": "Account protection",
- "identityProtectionPreview": "Account protection (preview)",
- "mDMSecurityBaseline1810": "MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810Preview": "Preview: MDM Security Baseline for Windows 10 and later for October 2018",
- "mDMSecurityBaseline1810PreviewBeta": "Preview: MDM Security Baseline for Windows 10 for October 2018 (beta)",
- "mDMSecurityBaseline1906": "MDM Security Baseline for Windows 10 and later for May 2019",
- "mDMSecurityBaseline2004": "MDM Security Baseline for Windows 10 and later for August 2020",
- "mDMSecurityBaseline2101": "MDM Security Baseline for Windows 10 and later December 2020",
- "macOSAntivirus": "Antivirus",
- "macOSDiskEncryption": "FileVault",
- "macOSFirewall": "macOS firewall",
- "microsoftDefenderBaseline": "Microsoft Defender for Endpoint baseline",
- "office365Baseline": "Microsoft Office O365 baseline",
- "office365BaselinePreview": "Preview: Microsoft Office O365 baseline",
- "securityBaselines": "Security Baselines",
- "test": "Test Template",
- "testFirewallRulesSecurityTemplateName": "Windows Firewall rules (Test)",
- "testIdentityProtectionSecurityTemplateName": "Account protection (Test)",
- "windowsSecurityExperience": "Windows Security experience"
- },
- "Firewall": {
- "mDE": "Windows Firewall"
- },
- "FirewallRules": {
- "mDE": "Windows Firewall Rules"
- },
- "OneDriveKnownFolderMove": {
- "description": "OneDrive Known Folder Move settings: Windows 10 in cloud configuration template. https://aka.ms/CloudConfigGuide"
- },
- "accountProtection": "Account Protection",
- "administrativeTemplates": "Administrative Templates",
- "androidCompliancePolicy": "Android compliance policy",
- "aospDeviceOwnerCompliancePolicy": "Android (AOSP) compliance policy",
- "applicationControl": "App Control for Business",
- "attackSurfaceReductionRules": "Attack Surface Reduction Rules",
- "bitlocker": "BitLocker",
- "custom": "Custom",
- "deliveryOptimization": "Delivery Optimization",
- "derivedPersonalIdentityVerificationCredential": "Derived credential",
- "deviceControl": "Device Control",
- "deviceFeatures": "Device features",
- "deviceFirmwareConfigurationInterface": "Device Firmware Configuration Interface",
- "deviceLock": "Device Lock",
- "deviceOwner": "Fully managed, dedicated, and corporate-owned work profile",
- "deviceRestrictions": "Device restrictions",
- "deviceRestrictionsWindows10Team": "Device restrictions (Windows 10 Team)",
- "domainJoinPreview": "Domain Join",
- "editionUpgradeAndModeSwitch": "Edition upgrade and mode switch",
- "education": "Education",
- "email": "Email",
- "emailSamsungKnoxOnly": "Email (Samsung KNOX only)",
- "endpointProtection": "Endpoint protection",
- "expeditedCheckin": "Mobile device management configuration",
- "exploitProtection": "Exploit Protection",
- "extensions": "Extensions",
- "hardwareConfigurations": "BIOS Configurations and other settings",
- "identityProtection": "Identity protection",
- "iosCompliancePolicy": "iOS compliance policy",
- "kiosk": "Kiosk",
- "localUsersAndGroups": "Local user group membership",
- "macCompliancePolicy": "Mac compliance policy",
- "microsoft365AppsForEnterpriseSecurityBaseline": "Microsoft 365 Apps for Enterprise Security Baseline",
- "microsoftDefenderAntivirus": "Microsoft Defender Antivirus",
- "microsoftDefenderAntivirusexclusions": "Microsoft Defender Antivirus exclusions",
- "microsoftDefenderAtpWindows10Desktop": "Microsoft Defender for Endpoint (desktop devices running Windows 10 or later)",
- "microsoftDefenderFirewallRules": "Windows Firewall Rules",
- "microsoftDefenderforEndpointSecurityBaseline": "Microsoft Defender for Endpoint Security Baseline",
- "microsoftEdgeBaseline": "Security Baseline for Microsoft Edge",
- "mxProfileZebraOnly": "MX profile (Zebra only)",
- "networkBoundary": "Network boundary",
- "oemConfig": "OEMConfig",
- "overrideGroupPolicy": "Override Group Policy",
- "pkcsCertificate": "PKCS certificate",
- "pkcsImportedCertificate": "PKCS imported certificate",
- "preferenceFile": "Preference file",
- "presets": "Presets",
- "scepCertificate": "SCEP certificate",
- "secureAssessmentEducation": "Secure assessment (Education)",
- "securityBaselineForHololens2Advanced": "Advanced Security Baseline for HoloLens 2",
- "securityBaselineForHololens2Standard": "Standard Security Baseline for HoloLens 2",
- "securityBaselineForMicrosoftEdge": "Security Baseline for Microsoft Edge",
- "settingsCatalog": "Settings Catalog",
- "sharedMultiUserDevice": "Shared multi-user device",
- "softwareUpdates": "Software Updates",
- "trustedCertificate": "Trusted certificate",
- "unknown": "Unknown",
- "unsupported": "Unsupported",
- "vpn": "VPN",
- "wiFi": "Wi-Fi",
- "wiFiImport": "Wi-Fi import",
- "windows10CompliancePolicy": "Windows 10/11 compliance policy",
- "windows10MobileCompliancePolicy": "Windows 10 mobile compliance policy",
- "windows10XScep": "SCEP certificate - TEST",
- "windows10XTrustedCertificate": "Trusted certificate - TEST",
- "windows10XVPN": "VPN - TEST",
- "windows10XWifi": "WIFI - TEST",
- "windows11SecurityBaseline": "Security Baseline for Windows 10 and later",
- "windows365SecurityBaseline": "Windows 365 Security Baseline",
- "windows8CompliancePolicy": "Windows 8 compliance policy",
- "windowsHealthMonitoring": "Windows health monitoring",
- "windowsInformationProtection": "Windows Information Protection",
- "windowsPhoneCompliancePolicy": "Windows Phone compliance policy",
- "windowsUpdateforBusiness": "Windows Update for Business",
- "wiredNetwork": "Wired network",
- "workProfile": "Personally-owned work profile"
- },
- "WindowsUpdateRolloutOptions": {
- "gradualRollout": "Make update available gradually",
- "immediateStart": "Make update available as soon as possible",
- "startDateOnly": "Make update available on a specific date"
- },
- "EnrollmentType": {
- "devicesWithEnrollment": "Managed devices",
- "devicesWithoutEnrollment": "Managed apps"
- },
- "AppResources": {
- "AppSettingsUx": {
- "assignmentFilterColumnHeader": "Filter",
- "assignmentFilterTypeColumnHeader": "Filter mode",
- "assignmentToast": "End user notifications",
- "assignmentTypeTableHeader": "ASSIGNMENT TYPE",
- "autoUpdate": "Auto-update",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deliveryOptimizationPriorityHeader": "Delivery optimization priority",
- "groupTableHeader": "Group",
- "installContextLabel": "Install Context",
- "isRemovable": "Install as removable",
- "licenseTypeLabel": "License type",
- "modeTableHeader": "Group mode",
- "policySet": "Policy Set",
- "preventAutoAppUpdate": "Prevent automatic app updates",
- "preventManagedAppBackup": "Prevent iCloud app backup",
- "restartGracePeriodHeader": "Restart grace period",
- "startTimeColumnLabel": "Availability",
- "tracks": "Tracks",
- "uninstallOnRemoval": "Uninstall on device removal",
- "updateMode": "Update Priority",
- "vPN": "VPN"
- },
- "AppType": {
- "aADWebApp": "AAD web app",
- "androidEnterpriseSystemApp": "Android Enterprise system app",
- "androidForWorkApp": "Managed Google Play store app",
- "androidLobApp": "Android line-of-business app",
- "androidStoreApp": "Android store app",
- "builtInAndroid": "Built-In Android app",
- "builtInApp": "Built-In app",
- "builtInIos": "Built-In iOS app",
- "iosIPadOSWebClip": "iOS/iPadOS web clip",
- "iosLobApp": "iOS line-of-business app",
- "iosStoreApp": "iOS store app",
- "iosVppApp": "iOS volume purchase program app",
- "lineOfBusinessApp": "Line-of-business app",
- "macOSDmgApp": "macOS app (DMG)",
- "macOSEdgeApp": "Microsoft Edge (macOS)",
- "macOSLobApp": "macOS line-of-business app",
- "macOSMicrosoftDefenderApp": "Microsoft Defender ATP (macOS)",
- "macOSOfficeSuiteApp": "macOS Office Suite",
- "macOSPkgApp": "macOS app (PKG)",
- "macOSWebClip": "macOS web clip",
- "macOsVppApp": "macOS volume purchase program app",
- "managedAndroidLobApp": "Managed Android line-of-business app",
- "managedAndroidStoreApp": "Managed Android store app",
- "managedGooglePlayApp": "Managed Google Play store app",
- "managedGooglePlayPrivateApp": "Managed Google Play private app",
- "managedGooglePlayWebApp": "Managed Google Play web link",
- "managedIosLobApp": "Managed iOS line-of-business app",
- "managedIosStoreApp": "Managed iOS store app",
- "microsoftStoreForBusinessApp": "Microsoft Store for Business app",
- "microsoftStoreForBusinessReleaseManagedApp": "Microsoft Store for Business",
- "officeAddIn": "Office add-in",
- "officeSuiteApp": "Microsoft 365 Apps (Windows 10 and later)",
- "sharePointApp": "SharePoint app",
- "teamsApp": "Teams app",
- "webApp": "Web link",
- "win32CatalogApp": "Windows catalog app (Win32)",
- "winGetPublicApp": "Windows Package Manager Community Repository",
- "winGetStoreApp": "Microsoft Store app (new)",
- "windowsAppXLobApp": "Windows AppX line-of-business app",
- "windowsClassicApp": "Windows app (Win32)",
- "windowsEdgeApp": "Microsoft Edge (Windows 10 and later)",
- "windowsMobileMsiLobApp": "Windows MSI line-of-business app",
- "windowsPhone81AppXBundleLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81AppXLobApp": "Windows Phone 8.1 AppX line-of-business app",
- "windowsPhone81StoreApp": "Windows Phone 8.1 store app",
- "windowsPhoneXapLobApp": "Windows Phone XAP line-of-business app",
- "windowsStoreApp": "Microsoft Store app (legacy)",
- "windowsUniversalAppXLobApp": "Windows Universal AppX line-of-business app",
- "windowsUniversalLobApp": "Windows Universal line-of-business app",
- "windowsWebApp": "Windows web link"
- },
- "AppTypePlatform": {
- "android": "Android",
- "ios": "iOS",
- "macOs": "macOS",
- "web": "Web",
- "windows": "Windows"
- },
- "AssignmentAction": {
- "exclude": "Excluded",
- "include": "Included",
- "includeAllDevicesVirtualGroup": "Included",
- "includeAllUsersVirtualGroup": "Included"
- },
- "AssignmentToast": {
- "hideAll": "Hide all toast notifications",
- "showAll": "Show all toast notifications",
- "showReboot": "Show toast notifications for computer restarts"
- },
- "AutoUpdateSupersededApps": {
- "enabled": "Yes",
- "notConfigured": "No"
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "DeviceRestartBehaviorOptions": {
- "allow": "App install may force a device restart",
- "basedOnReturnCode": "Determine behavior based on return codes",
- "force": "Intune will force a mandatory device restart",
- "suppress": "No specific action"
- },
- "FilterType": {
- "exclude": "Exclude",
- "include": "Include",
- "none": "None"
- },
- "InstallIntent": {
- "available": "Available for enrolled devices",
- "availableWithoutEnrollment": "Available with or without enrollment",
- "notApplicable": "Not applicable",
- "required": "Required",
- "uninstall": "Uninstall"
- },
- "SettingType": {
- "assignmentType": "Assignment type",
- "deviceLicensing": "License type",
- "installContext": "Uninstall on device removal",
- "toastSettings": "End user notifications",
- "vpnConfiguration": "VPN"
- },
- "UpdateMode": {
- "default": "Default",
- "postponed": "Postponed",
- "priority": "High Priority"
- }
- },
- "WindowsEnrollment": {
- "DevicePreparation": {
- "description": "Configure devices for initial provisioning.",
- "title": "Device preparation"
- },
- "EnrollmentSettings": {
- "description": "Configure enrollment settings such as blocking enrollment and assign to users.",
- "title": "Enrollment settings"
- },
- "OSConfiguration": {
- "menuDescription": "Configure settings that users can use to recover Windows from a bootable flash drive.",
- "menuTitle": "Windows operating system recovery configuration"
- },
- "coManagementAuthorityDesc": "Configure co-management settings for Configuration Manager integration",
- "coManagementAuthorityTitle": "Co-management Settings ",
- "deploymentProfiles": "Windows Autopilot deployment profiles",
- "description": "Learn about the seven different ways a Windows 10/11 PC can be enrolled into Intune by users or admins.",
- "descriptionLabel": "Windows enrollment methods",
- "enrollmentStatusPage": "Enrollment Status Page"
- },
- "WindowsDriverUpdateProfile": {
- "ApprovalMethod": {
- "automatic": "Automatically approve all recommended driver updates",
- "manual": "Manually approve and deploy driver updates"
- },
- "BulkActions": {
- "button": "Bulk actions"
- },
- "Details": {
- "ApprovalMethod": {
- "label": "Approval method:"
- },
- "DeploymentDeferralInDays": {
- "label": "Make updates available after",
- "units": "(days)",
- "value": "{0} days"
- },
- "DriverAction": {
- "header": "Select an action below.",
- "label": "Driver action",
- "placeholder": "Select an action"
- },
- "IncludedDrivers": {
- "label": "Included drivers"
- },
- "SelectDrivers": {
- "header": "Select drivers to include in your bulk action"
- },
- "SelectDriversToInclude": {
- "button": "Select drivers to include"
- },
- "SelectLessDrivers": {
- "validation": "At most one hundred drivers can be selected"
- },
- "SelectMoreDrivers": {
- "validation": "At least one driver should be selected"
- },
- "SelectedDrivers": {
- "label": "Selected drivers"
- },
- "availabilityDate": "Make available in Windows Update",
- "bladeTitle": "Driver updates Windows 10 and later (preview)",
- "lastSync": "Last sync:",
- "lastSyncDefaultText": "Pending initial inventory collection",
- "loadError": "Loading failed!"
- },
- "DriverStatus": {
- "approved": "Approved",
- "declined": "Declined",
- "export": "Exporting recommended drivers",
- "needsReview": "Needs review",
- "paused": "Paused"
- },
- "DriversToReview": {
- "text": "{0} to review"
- },
- "Subtitle": {
- "automatic": "Automatic approval driver update policy",
- "manual": "Manual approval driver update policy"
- },
- "SyncNotification": {
- "failure": "Unable to sync {0}",
- "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
- "pending": "{0} sync in progress",
- "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
- "success": "{0} sync complete",
- "successDescription": "Sync with WUfB service completed at {0}"
- },
- "SyncSpinner": {
- "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
- },
- "TabName": {
- "basics": "Basics",
- "driverUpdateSettings": "Settings",
- "otherDrivers": "Other drivers",
- "properties": "Properties",
- "recommendedDrivers": "Recommended drivers"
- },
- "driverAddFilter": "Add filter",
- "driverApplicableDevices": "Applicable devices",
- "driverApprovalStatus": "Status",
- "driverBulkActions": "Bulk actions",
- "driverClass": "Driver class",
- "driverCount": "Showing {0} to {1} of {2} records",
- "driverFilterNoneSelected": "None selected",
- "driverManufacturer": "Manufacturer",
- "driverName": "Driver name",
- "driverNameLower": "windows driver update deployment",
- "driverNameUpper": "Windows driver update deployment",
- "driverRefresh": "Refresh",
- "driverReleaseDate": "Release date",
- "driverSearch": "Search",
- "driverSearchKeyword": "Enter search keyword",
- "driverVersion": "Version",
- "firstDeploymentDate": "First Deployment",
- "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
- "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
- },
- "CategoryDescription": {
- "androidGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "androidZebraMxZebraMx": "Configure Zebra devices by uploading a MX profile in XML format.",
- "iosDeviceFeaturesAirprint": "Use these settings to configure iOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "iosDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running iOS 13.0 or later.",
- "iosDeviceFeaturesHomeScreenLayout": "Configure the layout for the dock and Home Screens on iOS devices. Certain devices may have limits to how many items can be displayed.",
- "iosDeviceFeaturesIOSWallpaper": "Display an image that will appear on the Home Screen and/or the lock screen of iOS devices.\n To display a unique image in each location, create one profile with the lock screen image, and one with the Home Screen image.\n Then assign both profiles to your users.\n \n
\n
Max file size: 750 KB
\n
File type: PNG, JPG or JPEG
\n
\n ",
- "iosDeviceFeaturesNotifications": "Specify notification settings for apps. Supports iOS 9.3 and later.",
- "iosDeviceFeaturesSharedDevice": "Specify optional text displayed on the locked screen. It is supported on iOS 9.3 and later. Learn More",
- "iosGeneralApplicationRestrictions": "Use these settings to stay informed about which users install apps that are not approved for use in your company. Select the type of restricted app list:
\n Prohibited apps - A list of apps that you want to be informed about when users install them. \n Approved apps - A list of apps that are approved for use in your company. When users install an app that is not in this list, you will be informed. \n ",
- "iosGeneralApplicationVisibility": "Use the show apps list to specify the iOS apps that user can view or launch. Use the hidden apps list to specify the iOS apps that user cannot view or launch.",
- "iosGeneralAutonomousSingleAppMode": "Apps you add to this list and assign to a device can lock the device to run only that app once launched, or lock the device while a certain action is running (for example taking a test). Once the action is complete, or you remove the restriction, the device returns to its normal state.",
- "iosGeneralKiosk": "Kiosk mode locks various settings into a device, or specifies a single app that can be run on a device. This can be useful in environments like a retail store where you want a device to run only a single demo app.",
- "macDeviceFeaturesAirprint": "Use these settings to configure macOS devices to automatically connect to AirPrint compatible printers on your network. You'll need the IP address and resource path of your printers.",
- "macDeviceFeaturesAssociatedDomains": "Configure associated domains to share data and sign-in credentials between your org’s apps and websites. This profile can be applied to devices running macOS 10.15 or later.",
- "macDeviceFeaturesExtensibleSingleSignOn": "Configure an app extension that enables single sign-on (SSO) for devices running macOS 10.15 or later.",
- "macDeviceFeaturesLoginItems": "Choose which apps, files, and folders open when users log in to their devices. If you don't want users to change how the selected apps open, you can hide the app from the user configuration.",
- "macDeviceFeaturesLoginWindow": "Configure the appearance of the macOS login screen and the functions that are available to users before and after they log in.",
- "macExtensionsKernelExtensions": "Use these settings to configure kernel extension policy on macOS devices running 10.13.2 or later.",
- "macGeneralDomains": "Emails that the user sends or receives which don't match the domains you specify here will be marked as untrusted.",
- "windows10EndpointProtectionApplicationGuard": "While using Microsoft Edge, Microsoft Defender Application Guard protects your environment from sites that haven’t been defined as trusted by your organization. When users visit sites that aren’t listed in your isolated network boundary, the sites will be opened in a virtual browsing session in Hyper-V. Trusted sites are defined by a network boundary, which can be configured in Device Configuration. Note this feature is only available for devices running 64-bit Windows 10 or later.",
- "windows10EndpointProtectionCredentialGuard": "Enabling Credential Guard will enable the following required settings:\n \n
\n
Enable Virtualization-based Security: Turns on virtualization-based security (VBS) at next reboot. Virtualization-based security uses the Windows Hypervisor to provide support for security services.
\n \n
Secure Boot with Direct Memory Access: Turns on VBS with Secure Boot and direct memory access (DMA).
\n
\n ",
- "windows10EndpointProtectionDeviceGuard": "Choose additional apps that either need to be audited by, or can be trusted to run by Microsoft Defender Application Control. Windows components and all apps from Windows store are automatically trusted to run.
\n Applications will not be blocked when running in “audit only” mode. “Audit only” mode logs all events in local client logs.\n ",
- "windows10GeneralPrivacyPerApp": "Add apps that should have a different privacy behavior from what you defined in “Default privacy”.",
- "windows10NetworkBoundaryNetworkBoundary": "The network boundary is the list of enterprise resources, such as cloud-hosted domain and IP address ranges for computers that are on the enterprise network. Define network boundaries to apply policies to protect data that resides in these locations.",
- "windowsHealthMonitoring": "Configure the Windows health monitoring policy.",
- "windowsPhoneGeneralApplicationRestrictions": "Windows Phone can block users from installing or launching apps specified in the prohibited apps list, or apps not specified in the approved apps list. All managed apps must be added to the approved list."
- },
- "Inputs": {
- "accountDomain": "Account domain",
- "accountDomainHint": "e.g. contosodomain",
- "accountDomainInfoBalloon": "Specify the user’s account domain.",
- "accountTypeInfoBalloon": "Specify the account type being configured based on the authentication model",
- "allowContactSetting": "Allow user to change contact setting",
- "allowContactSyncInfoBalloon": "Specify if the user is allowed to change the contact sync setting",
- "allowUserChange": "Allow user to change setting",
- "androidPackageNamePreset": "com.microsoft.word",
- "androidPackageNameValidation": "Please enter a package name similar to com.microsoft.word",
- "androidUrlValidation": "Enter a valid url similar to https://play.google.com/store/apps/details?id=com.microsoft.bing&hl=en",
- "appInstallContext": "App install context",
- "appUrlLabel": "Appstore URL",
- "appleUrlValidation": "Enter a valid url similar to https://www.itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8",
- "applicableDeviceType": "Applicable device type",
- "assignmentActionLabel": "Mode",
- "authenticationMethodInfoBalloon": "Specify the authentication method for the user",
- "authenticationMetod": "Authentication method",
- "authenticationType": "Authentication type",
- "authenticationTypeInfoBalloon": "Specify the authentication type for the user",
- "availableLicenseCount": "Available licenses",
- "basicAuth": "Basic authentication",
- "biometricsInfoBalloon": "Biometrics, such as TouchID or FaceID, can be required for users to access the app on their device. When required, biometrics are used in addition to the authentication method selected in this profile. This setting should not be enabled when Intune App Protection Policies are deployed, as the app protection policy includes access requirements prior to accessing managed data. Enabling both will result in multiple access prompts to access Outlook mobile. When set as not configured, the default app setting is set to Off. ",
- "bookNameLabel": "Book name",
- "bundleDescriptionHint": "Enter a description that describes the apps included.",
- "calendar": "Calendar",
- "categoryLabel": "Category",
- "categoryNameLabel": "Default name",
- "certProfileType": "Certificate profile type",
- "certificate": "Certificate",
- "certificates": "Certificates",
- "commandLineLabel": "Command-line arguments",
- "commandLineSizeHint": "The maximum length of the command-line arguments text is 1024 characters",
- "configurationSettingsFormatLabel": "Configuration settings format",
- "configurationSettingsLabel": "Settings format",
- "contactSync": "Save Contacts",
- "contactSyncInfoBalloon": "Saving contacts to the mobile device’s native address book allows new calls and text messages to be linked with the user’s existing Outlook contacts. When set as not configured, the default app setting is set to Off.",
- "contacts": "Contacts",
- "createdDateTime": "Created",
- "defaultCategoryHint": "Default categories cannot be changed",
- "deploySMimeCertsFromIntune": "Deploy S/MIME certificates from Intune",
- "descriptionGenericLabel": "Description",
- "descriptionHint": "Enter a description...",
- "descriptionLabel": "Description",
- "descriptionSizeHint": "The length of the description should be no longer than 10,000 characters",
- "developerLabel": "Developer",
- "developerSizeHint": "The maximum length of the developer name is 256 characters.",
- "disable": "Disable",
- "disabled": "Disabled",
- "displayNameLabel": "Name",
- "displayVersionHint": "Enter the app version",
- "displayVersionLabel": "App Version",
- "displayVersionLengthCheck": "The length of the display version should be a maximum of 130 characters",
- "eBookCategoryNameLabel": "Default name",
- "emailAccount": "Email account name",
- "emailAccountHint": "e.g. Corporate Email",
- "emailAccountInfoBalloon": "Specify the display name for the email account as it will appear to users on their devices",
- "emailAddressAttribute": "Email address attribute from Microsoft Entra ID",
- "emailAddressInfoBalloon": "Specify the email address to be used for sending and receiving mail",
- "emailServer": "Email Server",
- "emailServerHint": "e.g. mail.contoso.com",
- "emailServerInfoBalloon": "Specify the host name of your Exchange Server",
- "enable": "Enable",
- "enableSMime": "Enable S/MIME",
- "enabled": "Enabled",
- "encryptAllEmails": "Encrypt all emails",
- "encryptionCertificates": "Encryption certificates",
- "endUserNotifications": "End-user notifications",
- "enrollmentTypeLabel": "Device enrollment type",
- "externalRecipients": "External recipients MailTip",
- "externalRecipientsInfoBalloon": "The External Recipients MailTip is displayed if the sender adds a recipient that's external or adds a distribution group that contains external recipients. This MailTip informs senders if a message they're composing will leave the organization, helping them make the correct decisions about wording, tone, and content. Available only for Exchange Online accounts and on-premises accounts leveraging hybrid modern authentication. When set as not configured, the default app setting is set to On.",
- "focusedInbox": "Focused Inbox",
- "focusedInboxInfoBalloon": "Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab. When set as not configured, the default app setting is set to On. ",
- "fullScreenEnabledLabel": "Full screen",
- "gmailNineAmountOfEmail": "Amount of email to synchronize",
- "gmailNineAuthenticationMethodInfoBalloon": "Select how you want users to authenticate to the email server. Use certificates to provide the most secure and seamless experience for end users. Certificate based authentication is not yet available because SCEP and PKCS certificate profiles for device owner devices are not available. ",
- "gmailNineCertificateUPNInfoBalloon": "The certificate must include user principal name (UPN) as a subject alternative name.",
- "gmailNineEmailAddressInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the email address that will be used by the profile e.g. MyName@contoso.com (UPN). Learn more about Microsoft Entra attributes for email profiles.",
- "gmailNineEmailServerInfoBalloon": "The Exchange location (URL) of the email server to which the app you specified connects to get email.",
- "gmailNineEmailSynchronizeInfoBalloon": "Control how much email the client will synchronize.",
- "gmailNineSSLInfoBalloon": "Enable SSL to help secure all communications with the email server.",
- "gmailNineUsernameInfoBalloon": "The attribute Intune gets from Microsoft Entra ID to dynamically generate the username that will be used by the profile e.g. MyName@contoso.com (UPN) or MyName (username). Learn more about Microsoft Entra attributes for email profiles.",
- "ignoreManifestScope": "Ignore manifest scope",
- "ignoreVersionDetection": "Ignore app version",
- "informationUrlLabel": "Information URL",
- "informationUrlSizeHint": "The maximum length of the information url is 1024 characters",
- "installAsManaged": "Install as managed",
- "installationSourceLabel": "App type",
- "installerTypeInfoBalloon": "The installer type of the application package.",
- "installerTypeLabel": "Installer Type",
- "isFeatured": "Show this as a featured app in the Company Portal",
- "isMAMEnabledToggleLabel": "Yes",
- "lastModifiedDateTime": "Last updated Time",
- "ldapUrl": "LDAP URL",
- "licensingType": "Supports device context assignment",
- "microsoft": "Microsoft",
- "minimumOperationSystem": "Minimum operating system",
- "modernAuth": "Modern authentication",
- "nameHint": "Enter a name",
- "nameLabel": "Name",
- "nameSizeHint": "The maximum length of the name is 512 characters.",
- "notConfigured": "Not configured",
- "notesLabel": "Notes",
- "notesSizeHint": "The maximum length of the notes text is 1024 characters.",
- "notificationType": "Notification type",
- "oneDay": "One Day",
- "oneMonth": "One Month",
- "oneWeek": "One Week",
- "outlookSMimeSettings": "Outlook S/MIME settings",
- "ownerLabel": "Owner",
- "ownerSizeHint": "The maximum length of the owner name is 256 characters.",
- "packageIdLabel": "Package Identifier",
- "packageNameLabel": "Package name",
- "pivCredentialNotConfigured": "You haven't selected a derived credential issuer for your tenant. You'll need to configure one before you can successfully apply this policy to devices.",
- "platformLabel": "Platform",
- "policyDescriptionLabel": "Description",
- "policyNameLabel": "Name",
- "preComposedIconEnabled": "Precomposed",
- "primarySMTPAddress": "Primary SMTP Address",
- "privacyUrlLabel": "Privacy URL",
- "publisherHint": "Enter a publisher name",
- "publisherLabel": "Publisher",
- "publisherSizeHint": "The length of the publisher name should be between 2 and 1024 characters (inclusive)",
- "require": "Require",
- "requireBiometrics": "Require Biometrics to access app",
- "sAMAccountName": "sAMAccountName",
- "scopeTagsRequired": "At least one scope tag is required",
- "searchAppLabel": "Select app",
- "searchAppLinkText": "Search the App Store",
- "searchWinGetPublicRepositoryLinkText": "Search the Windows Package Manager Community Repository",
- "searchWinGetStoreRepositoryLinkText": "Search the Microsoft Store app (new)",
- "selectAAD": "Select a Microsoft Entra attribute",
- "selectAppFileLabel": "Select file",
- "selectAppFileLinkText": "Select app package file",
- "selectAppFileToUpdateLabel": "Select file to update",
- "selectAuthMethod": "Select an authentication method",
- "selectAuthType": "Select an authentication type",
- "selectCatalogAppLabel": "Select app",
- "selectCatalogAppLinkText": "Search the Enterprise App Catalog",
- "selectCertificate": "Select a certificate",
- "signAllEmails": "Sign all emails",
- "signingCertificates": "Signing certificates",
- "ssl": "SSL",
- "suiteDescriptionLabel": "Suite Description",
- "suiteNameLabel": "Suite Name",
- "targetApplicationBundleIdentifier": "Target application bundle identifier",
- "targetedPlatformsLabel": "Targeted platform",
- "tasks": "Tasks",
- "threeDays": "Three Days",
- "totalLicenseCount": "Total licenses",
- "twoWeeks": "Two Weeks",
- "unifiedAssignmentsLabel": "Assign to:",
- "unlimited": "Unlimited",
- "urlHint": "Enter a valid url",
- "useManagedBrowserHint": "Android and iOS only. Learn more",
- "useManagedBrowserLabel": "Require a managed browser to open this link",
- "userPrinicipalName": "User Principal Name",
- "username": "Username",
- "usernameAttribute": "Username attribute from Microsoft Entra ID",
- "usernameAttributreInfoBalloon": "Specify the User Principal Name for the email profile that will be used to authenticate the account",
- "usernamePassword": "Username and password",
- "webAppUrlHint": "Enter a valid url beginning with http:// or https://",
- "webAppUrlLabel": "App URL",
- "webAppUrlSizeHint": "The maximum length of the app url is 1024 characters",
- "windowsUrlValidation": "Enter a valid URL similar to https://www.microsoft.com/store/p/lync/9wzdncrfhvhm",
- "xMLDataEntered": "XML Data Entered",
- "xmlFormatInvalid": "XML policy format is invalid.",
- "xmlTooLarge": "Input size must be less than 1 MB."
- },
- "AzureIAM": {
- "AuthContext": {
- "Delete": {
- "failure": "Failed to delete {0}",
- "failureCa": "Failed to delete {0} because it is referenced by CA policies",
- "modifying": "Deleting {0}",
- "success": "Successfully deleted {0}"
- },
- "Notify": {
- "failure": "Failed to update {0}",
- "modifying": "Modifying {0}",
- "success": "Successfully updated {0}"
- },
- "menuLabel": "Authentication context"
- },
- "PolicyControlFedAuthMethod": {
- "ariaLabel": "Learn more about requiring authentication methods satisfied by federation providers.",
- "certificate": "Certificate authentication",
- "infoBubble": "Specify a required authentication method, that must be satisfied by federation provider, such as ADFS.",
- "multifactor": "Multifactor authentication",
- "require": "Require federated authentication method (Preview)",
- "whatIfFormat": "{0} - {1}"
- },
- "SessionLifetime": {
- "PersistentBrowser": {
- "Error": {
- "notAllApps": "Persistent browser session policy only works correctly when \"All cloud apps\" is selected. Please update your cloud apps selection."
- },
- "Option": {
- "always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
- "label": "Persistent browser session",
- "never": "Never persistent"
- },
- "Warning": {
- "allApps": "Persistent browser session only works correctly when All cloud apps is selected. Please change your cloud apps selection. Click here to learn more."
- }
- },
- "SignInFrequency": {
- "Aria": {
- "units": "Hours or days",
- "value": "Frequency"
- },
- "Option": {
- "Day": {
- "plural": "{0} days",
- "singular": "1 day"
- },
- "Hour": {
- "plural": "{0} hours",
- "singular": "1 hour"
- },
- "daysOption": "Days",
- "everytime": "Every time",
- "help": "Time period before a user is asked to sign-in again when attempting to access a resource. The default setting is a rolling window of 90 days, i.e. users will be asked to re-authenticate on the first attempt to access a resource after being inactive on their machine for 90 days or longer.",
- "hoursOption": "Hours",
- "label": "Sign-in frequency",
- "placeholder": "Select units"
- }
- },
- "mainOption": "Modify session lifetime",
- "mainOptionHelp": "Configure how often users will get prompted and whether browser sessions will be persisted. Applications that don't support modern authentication protocols might not honor these policies. In such cases please contact the application developer."
- },
- "SingleSelectorActive": {
- "failed": "Unable to load this data.",
- "reattempt": "Loading data. Reattempt {0} of {1}."
- },
- "UserSelectionBlade": {
- "DirectoryRoles": {
- "ariaLabel": "Choose directory roles"
- },
- "Excluded": {
- "gridAria": "List of excluded users"
- },
- "Included": {
- "gridAria": "List of included users"
- },
- "Validation": {
- "customRoleIncluded": "\"Directory Roles\" includes at least one custom role",
- "customRoleSelected": "At least one custom role is selected",
- "failed": "\"{0}\" must be configured",
- "roles": "Select at least one role",
- "usersGroups": "Select at least one user or group"
- },
- "learnMore": "Control access based on who the policy will apply to, such as users and groups, workload identities, directory roles, or external guests."
- },
- "advancedTabText": "Advanced",
- "allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
- "allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
- "allCloudOrSpecificApps": "The \"sign-in frequency every time\" session control requires \"all cloud apps\" or specifically-supported apps to be selected",
- "allDayCheckboxLabel": "All day",
- "allDevicePlatforms": "Any device",
- "allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
- "allGuestUserLabel": "All guest and external users",
- "allRiskLevelsOption": "All risk levels",
- "allTrustedLocationLabel": "All trusted locations",
- "allUserGroupSetSelectorLabel": "All users and groups selected",
- "allUsersReauth": "The \"sign-in frequency every time\" session control requires \"All Users\" to be selected",
- "allUsersString": "All users",
- "and": "{0} AND {1} ",
- "andWithGrouping": "({0}) AND {1} ",
- "androidDisplayName": "Android",
- "anyCloudAppSelection": "Any cloud app",
- "appContextOptionInfoContent": "Requested authentication tag",
- "appContextOptionLabel": "Requested authentication tag (Preview)",
- "appContextUriPlaceholder": "Example: uri:contoso.com:level3",
- "appEnforceInfoBubble": "App enforced restrictions might require additional admin configurations within the cloud apps. The restrictions will only take effect for new sessions.",
- "appNotSetSeletorLabel": "0 cloud apps selected",
- "appReauthNotSupported": "This app does not support the \"sign-in frequency every time\" session control.",
- "applyConditionClientAppInfoBalloonContent": "Configure client apps to apply the policy to specific client apps",
- "applyConditionDevicePlatformInfoBalloonContent": "Configure device platforms to apply the policy to specific platforms",
- "applyConditionDeviceStateInfoBalloonContent": "Configure device state to apply the policy to specific device state(s)",
- "applyConditionLocationInfoBalloonContent": "Configure locations to apply the policy to trusted/untrusted locations",
- "applyConditionSigninRiskInfoBalloonContent": "Configure sign-in risk to apply the policy to selected risk level(s)",
- "applyConditionUserRiskInfoBalloonContent": "Configure user risk to apply the policy to selected risk level(s)",
- "applyConditonLabel": "Configure",
- "ariaLabelPolicyDisabled": "Policy is disabled",
- "ariaLabelPolicyEnabled": "Policy is enabled",
- "ariaLabelPolicyReportOnly": "Policy is in Report-only mode",
- "blockAccess": "Block access",
- "builtInDirectoryRoleLabel": "Built-in directory roles",
- "casCustomControlInfo": "Custom policies need to be configured in Cloud App Security portal. This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "casInfoBubble": "This control works for various cloud apps.",
- "casPreconfiguredControlInfo": "This control works instantly for featured apps and can be self onboarded for any app. Click here to learn more about both scenarios.",
- "cert64DownloadCol": "Download base64 certificate",
- "cert64Name": "VpnBase64Cert",
- "certDownloadCol": "Download certificate",
- "certDurationCol": "Expiry",
- "certDurationStartCol": "Valid from",
- "certName": "VpnCert",
- "certainApps": "Only specifically-supported apps are enabled for \"Sign-in frequency every time\" if \"Require multifactor authentication\" and \"Require password change\" grants are not selected",
- "chooseApplicationsBladeSubtitle": "",
- "chooseApplicationsBladeTitle": "Choose Applications",
- "chooseApplicationsCartSubitle": "",
- "chooseApplicationsCartTitle": "Chosen Applications",
- "chooseApplicationsEmpty": "No Applications",
- "chooseApplicationsNone": "None",
- "chooseApplicationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseApplicationsPlural": "{0} and {1} more",
- "chooseApplicationsReAuthEverytimeInfo": "Looking for your app? Some applications cannot be used with \"Require reauthentication – every time\" session control",
- "chooseApplicationsRemove": "Remove",
- "chooseApplicationsReturnedPlural": "{0} applications found",
- "chooseApplicationsReturnedSingular": "1 application found",
- "chooseApplicationsSearchBalloon": "Search for an Application by entering its name or ID.",
- "chooseApplicationsSearchHint": "Search Applications...",
- "chooseApplicationsSearchLabel": "Applications",
- "chooseApplicationsSearching": "Searching...",
- "chooseApplicationsSelect": "Select",
- "chooseApplicationsSelected": "Selected",
- "chooseApplicationsSingular": "{0} and 1 more",
- "chooseApplicationsTooMany": "More results than can be shown. Please filter using the search box.",
- "chooseLocationCorpnetItem": "Corporate network",
- "chooseLocationSelectedLocationsLabel": "Selected locations",
- "chooseLocationTrustedIpsItem": "Multifactor authentication trusted IPs",
- "chooseLocationsBladeSubtitle": "",
- "chooseLocationsBladeTitle": "Choose Locations",
- "chooseLocationsCartSubitle": "",
- "chooseLocationsCartTitle": "Chosen Locations",
- "chooseLocationsEmpty": "No Locations",
- "chooseLocationsExcludedSelectorTitle": "Select",
- "chooseLocationsIncludedSelectorTitle": "Select",
- "chooseLocationsNone": "None",
- "chooseLocationsNoneFound": "We didn't find \"{0}\". Try another name or ID.",
- "chooseLocationsPlural": "{0} and {1} more",
- "chooseLocationsRemove": "Remove",
- "chooseLocationsReturnedPlural": "{0} locations found",
- "chooseLocationsReturnedSingular": "1 location found",
- "chooseLocationsSearchBalloon": "Search for a Location by entering its name.",
- "chooseLocationsSearchHint": "Search Locations...",
- "chooseLocationsSearchLabel": "Locations",
- "chooseLocationsSearching": "Searching...",
- "chooseLocationsSelect": "Select",
- "chooseLocationsSelected": "Selected",
- "chooseLocationsSelectionBladeExcludedSelectorTitle": "Select",
- "chooseLocationsSelectionBladeIncludedSelectorTitle": "Select",
- "chooseLocationsSingular": "{0} and 1 more",
- "chooseLocationsTooMany": "More results than can be shown. Please filter using the search box.",
- "claimProviderAddCommandText": "New custom control",
- "claimProviderAddNewBladeTitle": "New custom control",
- "claimProviderDeleteCommand": "Delete",
- "claimProviderDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "claimProviderDeleteTitle": "Are you sure?",
- "claimProviderEditInfoText": "Enter the JSON for customized controls given by your claim providers.",
- "claimProviderNotificationCreateDescription": "Creating custom control named '{0}'",
- "claimProviderNotificationCreateFailedDescription": "Creating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationCreateFailedTitle": "Failed to create custom control",
- "claimProviderNotificationCreateSuccessDescription": "Created custom control named '{0}'",
- "claimProviderNotificationCreateSuccessTitle": "Created '{0}'",
- "claimProviderNotificationCreateTitle": "Creating '{0}'",
- "claimProviderNotificationDeleteDescription": "Deleting custom control named '{0}'",
- "claimProviderNotificationDeleteFailedDescription": "Deleting custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationDeleteFailedTitle": "Failed to delete custom control",
- "claimProviderNotificationDeleteSuccessDescription": "Deleted custom control named '{0}'",
- "claimProviderNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "claimProviderNotificationDeleteTitle": "Deleting '{0}'",
- "claimProviderNotificationUpdateDescription": "Updating custom control named '{0}'",
- "claimProviderNotificationUpdateFailedDescription": "Updating custom control '{0}' failed. Please try again later.",
- "claimProviderNotificationUpdateFailedTitle": "Failed to update custom control",
- "claimProviderNotificationUpdateSuccessDescription": "Updated custom control named '{0}'",
- "claimProviderNotificationUpdateSuccessTitle": "Updated '{0}'",
- "claimProviderNotificationUpdateTitle": "Updating '{0}'",
- "claimProviderValidationAppIdInvalid": "The \"AppId\" value is not valid. Please review and try again.",
- "claimProviderValidationClientIdMissing": "The data is missing a \"ClientId\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedMissing": "The \"Control\" is missing a \"ClaimsRequested\" value. Please review and try again.",
- "claimProviderValidationControlClaimsRequestedTypeMissing": "The \"ClaimsRequested\" item is missing a \"Type\" value. Please review and try again.",
- "claimProviderValidationControlIdAlreadyExists": "The \"Control\" \"Id\" value already exists. Please review and try again.",
- "claimProviderValidationControlIdMissing": "The \"Control\" is missing an \"Id\" value. Please review and try again.",
- "claimProviderValidationControlIdReferencedInExistingPolicy": "The \"Control\" \"Id\" value cannot be removed because it is referenced in an existing policy. Please remove it from the policy first.",
- "claimProviderValidationControlIdTooManyControls": "The \"Control\" property has too many controls. Please review and try again.",
- "claimProviderValidationControlIdValueReserved": "The \"Control\" \"Id\" value is a reserved keyword, please use a different id.",
- "claimProviderValidationControlNameAlreadyExists": "The \"Control\" \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationControlNameMissing": "The \"Control\" is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationControlsMissing": "The data is missing a \"Controls\" value. Please review and try again.",
- "claimProviderValidationDiscoveryUrlMissing": "The data is missing a \"DiscoveryUrl\" value. Please review and try again.",
- "claimProviderValidationInvalid": "There data provided is not valid. Please review and try again.",
- "claimProviderValidationInvalidJsonDefinition": "Unable to save the custom control. Review the JSON text and try again.",
- "claimProviderValidationNameAlreadyExists": "The \"Name\" value already exists. Please review and try again.",
- "claimProviderValidationNameMissing": "The data is missing a \"Name\" value. Please review and try again.",
- "claimProviderValidationUnknown": "There was an unknown error while validating the data provided. Please review and try again.",
- "claimProvidersNone": "No custom controls",
- "claimProvidersSearchPlaceholder": "Search controls.",
- "classicPoilcyFilterTitle": "Show",
- "classicPolicyAllPlatforms": "All Platforms",
- "classicPolicyClientAppBrowserAndNative": "Browser, mobile apps and desktop clients",
- "classicPolicyCloudAppTitle": "Cloud application",
- "classicPolicyControlAllow": "Allow",
- "classicPolicyControlBlock": "Block",
- "classicPolicyControlBlockWhenNotAtWork": "Block access when not at work",
- "classicPolicyControlRequireCompliantDevice": "Require compliant device",
- "classicPolicyControlRequireDomainJoinedDevice": "Require domain joined device",
- "classicPolicyControlRequireMfa": "Require multifactor authentication",
- "classicPolicyControlRequireMfaWhenNotAtWork": "Require multifactor authentication when not at work",
- "classicPolicyDeleteCommand": "Delete",
- "classicPolicyDeleteFailTitle": "Failed to delete classic policy",
- "classicPolicyDeleteInProgressTitle": "Deleting classic policy",
- "classicPolicyDeleteSuccessTitle": "Classic policy deleted",
- "classicPolicyDetailBladeTitle": "Details",
- "classicPolicyDisableCommand": "Disable",
- "classicPolicyDisableConfirmation": "Are you sure you want to disable '{0}'? This action cannot be undone.",
- "classicPolicyDisableFailDescription": "Failed to disable '{0}'",
- "classicPolicyDisableFailTitle": "Failed to disable classic policy",
- "classicPolicyDisableInProgressDescription": "Disabling '{0}'",
- "classicPolicyDisableInProgressTitle": "Disabling classic policy",
- "classicPolicyDisableSuccessDescription": "Successfully disabled '{0}'",
- "classicPolicyDisableSuccessTitle": "Classic policy disabled",
- "classicPolicyEasSupportedPlatforms": "Exchange ActiveSync supported platforms",
- "classicPolicyEasUnsupportedPlatforms": "Exchange ActiveSync unsupported platforms",
- "classicPolicyExcludedPlatformsTitle": "Excluded device platforms",
- "classicPolicyFilterAll": "All policies",
- "classicPolicyFilterDisabled": "Disabled policies",
- "classicPolicyFilterEnabled": "Enabled policies",
- "classicPolicyIncludeExcludeMembersDescription": "By excluding groups, you can perform phased migration of policies.",
- "classicPolicyIncludeExcludeMembersTitle": "Include/exclude groups",
- "classicPolicyIncludedPlatformsTitle": "Included device platforms",
- "classicPolicyManualMigrationMessage": "This policy needs to be migrated manually.",
- "classicPolicyMigrateCommand": "Migrate",
- "classicPolicyMigrateConfirmation": "Are you sure you want to migrate '{0}'? This policy can only be migrated once.",
- "classicPolicyMigrateFailDescription": "Failed to migrate '{0}'",
- "classicPolicyMigrateFailTitle": "Failed to migrate classic policy",
- "classicPolicyMigrateInProgressDescription": "Migrating '{0}'",
- "classicPolicyMigrateInProgressTitle": "Migrating classic policy",
- "classicPolicyMigrateRecommendText": "Recommendation: Migrate to the new Azure portal policies.",
- "classicPolicyMigrateSuccessTitle": "Classic policy migrated successfully",
- "classicPolicyMigratedSuccessDescription": "This classic policy can now be managed under Polices.",
- "classicPolicyMigratedSuccessDescriptionMultiple": "This classic policy is migrated as {0} new policies. New policies can be managed under Policies.",
- "classicPolicyNoEditPermissionMsg": "You don't have permission to edit this policy. Only global administrators and security administrators can edit the policy. Click here for more information.",
- "classicPolicySaveFailDescription": "Failed to save '{0}'",
- "classicPolicySaveFailTitle": "Failed to save classic policy",
- "classicPolicySaveInProgressDescription": "Saving '{0}'",
- "classicPolicySaveInProgressTitle": "Saving classic policy",
- "classicPolicySaveSuccessDescription": "Successfully saved '{0}'",
- "classicPolicySaveSuccessTitle": "Classic policy saved",
- "clientAppBladeLegacyInfoBanner": "Legacy auth is currently not supported",
- "clientAppBladeLegacyUpsellBanner": "Block unsupported client apps (Preview)",
- "clientAppBladeTitle": "Client apps",
- "clientAppDescription": "Select the client apps this policy will apply to",
- "clientAppExchangeActiveSync": "Exchange ActiveSync",
- "clientAppExchangeWarning": "Exchange ActiveSync currently does not support all other conditions",
- "clientAppLearnMore": "Control user access to target specific client applications not using modern authentication.",
- "clientAppLegacyHeader": "Legacy authentication clients",
- "clientAppMobileDesktop": "Mobile apps and desktop clients",
- "clientAppModernHeader": "Modern authentication clients",
- "clientAppOnlySupportedPlatforms": "Apply policy only to supported platforms",
- "clientAppSelectSpecificClientApps": "Select client apps",
- "clientAppWebBrowser": "Browser",
- "clientAppsSelectedLabel": "{0} included",
- "clientTypeBrowser": "Browser",
- "clientTypeEas": "Exchange ActiveSync clients",
- "clientTypeEasInfo": "Exchange ActiveSync clients that use legacy authentication only.",
- "clientTypeModernAuth": "Modern authentication clients",
- "clientTypeOtherClients": "Other clients",
- "clientTypeOtherClientsInfo": "This includes older office clients and other mail protocols(POP, IMAP, SMTP, etc). [Learn more][1]\n[1]: https://aka.ms/caclientapps\n",
- "cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
- "cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
- "cloudAppsSelectionExcludeAllMicrosoftClients": "Allow Microsoft cloud, desktop and mobile apps (Preview)",
- "cloudappsSelectionBladeAllCloudapps": "All cloud apps",
- "cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
- "cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
- "cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
- "cloudappsSelectionBladeIncludedSelectorTitle": "Select",
- "cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
- "cloudappsSelectorPluralExcluded": "{0} apps excluded",
- "cloudappsSelectorPluralIncluded": "{0} apps included",
- "cloudappsSelectorSingularExcluded": "1 app excluded",
- "cloudappsSelectorSingularIncluded": "1 app included",
- "cloudappsSelectorUserPlural": "{0} apps",
- "cloudappsSelectorUserSingular": "1 app",
- "conditionLabelMulti": "{0} conditions selected",
- "conditionLabelOne": "1 condition selected",
- "conditionalAccessBladeTitle": "Conditional Access",
- "conditionsNotSelectedLabel": "Not configured",
- "conditionsReqMfaReauthSet": "Some options are not available due to the \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control currently being selected",
- "conditionsReqPwSet": "Some options are not available due to the \"Require password change\" grant currently being selected",
- "configureCasText": "Configure Cloud App Security",
- "configureCustomControlsText": "Configure custom policy",
- "controlLabelMulti": "{0} controls selected",
- "controlLabelOne": "1 control selected",
- "controlValidatorText": "Please select at least one control",
- "controlsBlockAccessInfoBubble": "ControlsBlockAccessInfoBubble",
- "controlsDeviceComplianceAriaLabel": "Learn more about requiring compliant devices.",
- "controlsDeviceComplianceInfoBubble": "Device must be Intune compliant. If the device is non-compliant, the user will be prompted to bring the device under compliance.",
- "controlsDomainJoinedAriaLabel": "Learn more about requiring Microsoft Entra hybrid joined devices.",
- "controlsDomainJoinedInfoBubble": "Devices must be Microsoft Entra hybrid joined.",
- "controlsMamAriaLabel": "Learn more about requiring approved client applications.",
- "controlsMamInfoBubble": "Device must use these approved client applications.",
- "controlsMfaInfoBubble": "User must complete additional security requirements like phone call, text",
- "controlsOrAndInfoBubble": "ControlsOrAndInfoBubble",
- "controlsRequireCompliantAppAriaLabel": "Learn more about requiring policy protected apps.",
- "controlsRequireCompliantAppInfoBubble": "Device must use policy protected apps.",
- "controlsRequirePasswordResetAriaLabel": "Learn more about requiring a password change.",
- "controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication. Other controls can't be used.",
- "countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
- "createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
- "customRoleLabel": "Custom roles (not supported)",
- "dateRangeTypeLabel": "Date range",
- "daysOfWeekPlaceholderText": "Filter days of the week",
- "daysOfWeekTypeLabel": "Days of the week",
- "deletePolicyNoLicenseText": "You can delete this policy now. Once deleted you will not be able to recreate it until you have the required licenses.",
- "descriptionContentForControlsAndOr": "For multiple controls",
- "devicePlatform": "Device platform",
- "devicePlatformConditionHelpDescription": "Apply policy to selected device platforms.\n[Learn more][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2044750",
- "devicePlatformInclude": "{0} included",
- "devicePlatformIncludeExclude": "{0} and {1} excluded",
- "devicePlatformNoSelectionError": "Select device platforms requires one sub-item to be selected.",
- "devicePlatformsNone": "None",
- "deviceSelectionBladeExcludeDescription": "Select the platforms to exempt from the policy",
- "deviceSelectionBladeIncludeDescription": "Select the device platforms to include in this policy",
- "deviceStateAll": "All device state",
- "deviceStateCompliant": "Device marked as compliant",
- "deviceStateCompliantInfoContent": "Devices that are Intune compliant will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Intune compliant.",
- "deviceStateConditionConfigureInfoContent": "Configure policy based on device state",
- "deviceStateConditionSelectorInfoContent": "Whether the device the user is signing in from is 'Microsoft Entra hybrid joined' or 'marked as compliant'.\n This has been deprecated. Use '{1}' instead.",
- "deviceStateConditionSelectorLabel": "Device state (deprecated)",
- "deviceStateDomainJoined": "Device Microsoft Entra hybrid joined",
- "deviceStateDomainJoinedInfoContent": "Devices that are Microsoft Entra hybrid joined will be excluded from the evaluation of this policy, so for example if the policy blocks access it will block all devices except devices that are Microsoft Entra hybrid joined.",
- "deviceStateDomainJoinedInfoLinkText": "Learn more.",
- "deviceStateExcludeDescription": "Select the device state condition used to exclude devices from policy.",
- "deviceStateIncludeAndExcludeOneLabel": "{0} and exclude {1}",
- "deviceStateIncludeAndExcludeTwoLabel": "{0} and exclude {1}, {2}",
- "directoryRoleInfoContent": "Assign policy to built-in directory roles.",
- "directoryRolesLabel": "Directory roles",
- "discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
- "duplicatePolicyName": "{0} COPY",
- "endDatePickerLabel": "Ends",
- "endTimePickerLabel": "End time",
- "enterCountryText": "IP address and Country/Region are evaluated in a pair. Select the Country.",
- "enterIpText": "IP address and Country/Region are evaluated in a pair. Input the IP address.",
- "enterUserText": "No user is selected. Select a user.",
- "evaluationResult": "Evaluation result",
- "exchangeActiveSyncSelectedLabel": "Exchange ActiveSync",
- "exchangeActiveSyncSupportedPlatformOnlySelectedLabel": "Exchange ActiveSync with supported platforms only",
- "excludeAllTrustedLocationSelectorText": "all trusted locations",
- "featureRequiresP2": "This feature requires Microsoft Entra ID P2 license.",
- "friday": "Friday",
- "grantControls": "Grant controls",
- "gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
- "gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
- "gridPolicyName": "Policy Name",
- "gridPolicyState": "State",
- "groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
- "groupSelectionBladeExcludedSelectorTitle": "Select excluded groups",
- "groupSelectionBladeSelect": "Select groups",
- "groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
- "groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
- "highRisk": "High",
- "includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
- "includeAppsTextFormat": "Include: {0}.",
- "includeUnknownAreasCheckboxInfoBalloonContent": "Unknown areas are IP addresses that can't be mapped to a country/region.",
- "includeUnknownAreasCheckboxLabel": "Include unknown areas",
- "infoCommandLabel": "Info",
- "invalidCertDuration": "Invalid cert duration",
- "invalidIpAddress": "Value must be a valid IP address",
- "invalidReAuthSignInRiskOptionSelected": "The \"sign-in frequency every time\" session control does not allow the \"no risk\" selection in the \"sign-in risk\" condition control.",
- "invalidUriErrorMsg": "Please enter a valid Uri. For example,'uri:contoso.com:acr' ",
- "iosDisplayName": "iOS",
- "linuxDisplayName": "Linux",
- "loadAll": "Load all",
- "loading": "Loading...",
- "locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
- "locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
- "locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
- "locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
- "locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
- "locationsAllPrivateLinksLabel": "All Private Links in my tenant",
- "locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
- "locationsSelectedPrivateLinksLabel": "Selected Private Links",
- "lowRisk": "Low",
- "macOsDisplayName": "macOS",
- "managePoliciesLicenseText": "To manage Conditional Access policies, your organization needs Microsoft Entra ID P1 or P2.",
- "manageSecurityDefaultsAriaLabel": "Manage security defaults settings.",
- "markAsTrustedCheckboxInfoBalloonContent": "Signing in from a trusted location lowers a user's sign-in risk. Only mark this location as trusted if you know the IP ranges entered are established and credible in your organization.",
- "markAsTrustedCheckboxLabel": "Mark as trusted location",
- "mediumRisk": "Medium",
- "memberSelectionCommandRemove": "Remove",
- "menuItemClaimProviderControls": "Custom controls (Preview)",
- "menuItemClassicPolicies": "Classic policies",
- "menuItemInsightsAndReporting": "Insights and reporting",
- "menuItemManage": "Manage",
- "menuItemNamedLocationsPreview": "Named locations (Preview)",
- "menuItemNamedNetworks": "Named locations",
- "menuItemPolicies": "Policies",
- "menuItemTermsOfUse": "Terms of use",
- "modifiedTimeLabel": "Modified time",
- "monday": "Monday",
- "nameLabel": "Name",
- "namedLocationCountryInfoBanner": "Only IPv4 addresses are mapped to countries/regions. IPv6 addresses are included in unknown countries/regions.",
- "namedLocationTypeCountry": "Countries/Regions",
- "namedLocationTypeLabel": "Define the location using:",
- "namedLocationUpsellBanner": "This view has been deprecated. Go to the new and improved 'Named locations' view.",
- "namedLocationsHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/namedlocationupdate",
- "namedNetworkAddIpRanges": "Add a new IP range (ex: 40.77.182.32/27)",
- "namedNetworkCountryNeeded": "You need to select at least one country/region",
- "namedNetworkDeleteCommand": "Delete",
- "namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
- "namedNetworkInvalidRange": "Value must be a valid IP range.",
- "namedNetworkIpRangeNeeded": "You need at least one valid IP range",
- "namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
- "namedNetworkIpRangesTab": "IP ranges",
- "namedNetworkListAdd": "New location",
- "namedNetworkListConfigureTrustedIps": "Configure multifactor authentication trusted IPs",
- "namedNetworkNameDescription": "Example: 'Redmond office'",
- "namedNetworkNameInvalid": "The supplied name is invalid.",
- "namedNetworkNameRequired": "You must supply a name for this location.",
- "namedNetworkNoIpRanges": "No IP ranges",
- "namedNetworkNotificationCreateDescription": "Creating location named '{0}'",
- "namedNetworkNotificationCreateFailedDescription": "Creating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationCreateFailedTitle": "Failed to create location",
- "namedNetworkNotificationCreateSuccessDescription": "Created location named '{0}'",
- "namedNetworkNotificationCreateSuccessTitle": "Created '{0}'",
- "namedNetworkNotificationCreateTitle": "Creating '{0}'",
- "namedNetworkNotificationDeleteDescription": "Deleting location named '{0}'",
- "namedNetworkNotificationDeleteFailedDescription": "Deleting location '{0}' failed. Please try again later.",
- "namedNetworkNotificationDeleteFailedTitle": "Failed to Delete location",
- "namedNetworkNotificationDeleteSuccessDescription": "Deleted location named '{0}'",
- "namedNetworkNotificationDeleteSuccessTitle": "Deleted '{0}'",
- "namedNetworkNotificationDeleteTitle": "Deleting '{0}'",
- "namedNetworkNotificationUpdateDescription": "Updating location named '{0}'",
- "namedNetworkNotificationUpdateFailedDescription": "Updating location '{0}' failed. Please try again later.",
- "namedNetworkNotificationUpdateFailedTitle": "Failed to Update location",
- "namedNetworkNotificationUpdateSuccessDescription": "Updated location named '{0}'",
- "namedNetworkNotificationUpdateSuccessTitle": "Updated '{0}'",
- "namedNetworkNotificationUpdateTitle": "Updating '{0}'",
- "namedNetworkSearchPlaceholder": "Search locations.",
- "namedNetworkUploadFailedDescription": "There was an error parsing the supplied file. Please make sure to upload a plain-text file with each line in the CIDR format.",
- "namedNetworkUploadFailedTitle": "Failed to parse '{0}'",
- "namedNetworkUploadInProgressDescription": "Attempting to parse valid CIDR values from '{0}'.",
- "namedNetworkUploadInProgressTitle": "Parsing '{0}'",
- "namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
- "namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
- "namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
- "namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
- "namedNetworksAdd": "New named location",
- "namedNetworksConditionHelpDescription": "Control user access based on their physical location.\n[Learn more][1]\n[1]: http://aka.ms/ux_ca_locationcondition",
- "namedNetworksExcludeLabel": "{0} and {1} excluded",
- "namedNetworksHelpDescription": "Named locations are used by Microsoft Entra ID security reports to reduce false positives and Microsoft Entra Conditional Access policies.\n[Learn more][1]\n[1]: https://aka.ms/ux_ca_namedlocations",
- "namedNetworksIncludeLabel": "{0} included",
- "namedNetworksNone": "No named locations found.",
- "namedNetworksTitle": "Configure locations",
- "namednetworkExceedingSizeErrorBladeTitle": "Error details",
- "namednetworkExceedingSizeErrorDetailText": "Click here for more details.",
- "namednetworkExceedingSizeErrorMessage": "You have exceeded the maximum allowed storage for named locations. Try again with a shorter list. Click here to view more details.",
- "needMfaSecondary": "\"Require multifactor authentication\" must be selected when \"Sign-in frequency every time\" is selected with \"Secondary authentication methods only\"",
- "needMfaSpecificApps": "\"The \"sign-in frequency every time\" session control requires the \"Require multifactor authentication\" grant control when specifically-supported apps are selected",
- "newCertName": "new cert",
- "noAttributePermissionsError": "Insufficient privileges to create or update policy. Attribute definition reader role is required to add/edit dynamic filters.",
- "noPolicyRowMessage": "No policies",
- "noSPSelected": "No service principal selected",
- "noUpdatePermissionMessage": "You don't have permissions to update these settings. Please contact your global administrator to get access.",
- "noUserSelected": "No user selected",
- "noneRisk": "No risk",
- "office365Description": "These apps include Microsoft Flow, Microsoft Forms, Microsoft Teams, Office 365 Exchange Online, Office 365 SharePoint Online, Office 365 Yammer, and others.",
- "office365InfoBox": "At least one of the apps selected is part of Office 365. We recommend setting the policy on the Office 365 app instead.",
- "oneUserSelected": "1 user selected",
- "onlyGlobalAdminsCanSaveThisPolicyConfig": "Only global administrators can save this policy.",
- "or": "{0} OR {1} ",
- "pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like Cloud apps, Sign-in risk, and Device platforms with Microsoft Entra ID Premium",
- "policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked sign-on attribute.",
- "policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
- "policyAssignmentsSection": "Assignments",
- "policyBlockAllInfoBox": "The configured policy will block all users, so it is not supported. Review the assignments and controls. Exclude the current user {0}, if you would like to save this policy.",
- "policyCloudAppsDisplayTextAllApp": "All apps",
- "policyCloudAppsLabel": "Cloud apps",
- "policyConditionClientAppDescription": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionClientAppV2Description": "Software the user is employing to access the cloud app. For example, 'Browser'",
- "policyConditionDevicePlatform": "Device platforms",
- "policyConditionDevicePlatformDescription": "Platform the user is signing in from. For example, 'iOS'",
- "policyConditionLocation": "Locations",
- "policyConditionLocationDescription": "Location (determined using IP address range) the user is signing in from",
- "policyConditionLocationPreview": "Locations (Preview)",
- "policyConditionSigninRisk": "Sign-in risk",
- "policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
- "policyConditionUserRisk": "User risk",
- "policyConditionUserRiskDescription": "Configure user risk levels needed for policy to be enforced",
- "policyConditioniClientApp": "Client apps",
- "policyControlAllowAccessDisplayedName": "Grant access",
- "policyControlAuthenticationStrengthDisplayedName": "Require authentication strength (Preview)",
- "policyControlBladeTitle": "Grant",
- "policyControlBlockAccessDisplayedName": "Block access",
- "policyControlCompliantDeviceDisplayedName": "Require device to be marked as compliant",
- "policyControlContentDescription": "Control access enforcement to block or grant access.",
- "policyControlInfoBallonText": "Block access or select additional requirements which need to be satisfied to allow access",
- "policyControlMfaChallengeDisplayedName": "Require multifactor authentication",
- "policyControlRequireCompliantAppDisplayedName": "Require app protection policy",
- "policyControlRequireDomainJoinedDisplayedName": "Require Microsoft Entra hybrid joined device",
- "policyControlRequireMamDisplayedName": "Require approved client app",
- "policyControlRequiredPasswordChangeDisplayedName": "Require password change",
- "policyControlSelectAuthStrength": "Require authentication strength",
- "policyControlsNoControlsSelected": "0 controls selected",
- "policyControlsSection": "Access controls",
- "policyCreatBladeTitle": "New",
- "policyCreateButton": "Create",
- "policyCreateFailedMessage": "Error: {0}",
- "policyCreateFailedTitle": "Failed to create '{0}'",
- "policyCreateInProgressTitle": "Creating '{0}'",
- "policyCreateSuccessMessage": "Successfully created '{0}'. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyCreateSuccessTitle": "Successfully created '{0}'",
- "policyDeleteConfirmation": "Are you sure you want to delete '{0}'? This action cannot be undone.",
- "policyDeleteFailTitle": "Failed to delete '{0}'",
- "policyDeleteInProgressTitle": "Deleting '{0}'",
- "policyDeleteSuccessTitle": "Successfully deleted '{0}'",
- "policyEnforceLabel": "Enable policy",
- "policyErrorCannotSetSigninRisk": "You don't have permission to save a policy with a sign-in risk condition.",
- "policyErrorNoPermission": "You don't have permission to save policy. Contact your global admin.",
- "policyErrorUnknown": "Something went wrong, please try again later.",
- "policyFallbackWarningMessage": "Failure to create or update '{0}' using MS Graph resulting in a fallback to AD Graph. Please investigate the following scenario as there is most likely a bug when calling the policy endpoint for MS Graph with an incompatible condition.",
- "policyFallbackWarningTitle": "Creating or updating '{0}' partially successful",
- "policyNameCannotBeEmpty": "Policy name can't be empty",
- "policyNameDevice": "Device policy",
- "policyNameFormat": "[{0}] {1}",
- "policyNameMam": "Mobile App Management policy",
- "policyNameMfaLocation": "Multifactor authentication and location policy",
- "policyNamePlaceholderText": "Example: 'Device compliance app policy'",
- "policyNameTooLongError": "Policy name is too long. Maximum 256 characters",
- "policyOff": "Off",
- "policyOn": "On",
- "policyReportOnly": "Report-only",
- "policyReviewSection": "Review",
- "policySaveButton": "Save",
- "policyStatusIconDescription": "Policy is Enabled",
- "policyStatusIconEnabled": "Enabled status icon",
- "policyTemplateName1": "Use app enforced restrictions for {0} browser access",
- "policyTemplateName2": "Allow {0} access only on managed devices",
- "policyTemplateName3": "Policy migrated from Continuous Access Evaluation settings",
- "policyTriggerRiskSpecific": "Select specific risk level",
- "policyTriggersInfoBalloonText": "Conditions which define when the policy will apply. For example, 'location'",
- "policyTriggersNoConditionsSelected": "0 conditions selected",
- "policyTriggersSelectorLabel": "Conditions",
- "policyUpdateFailedMessage": "Error: {0}",
- "policyUpdateFailedTitle": "Failed to update {0}",
- "policyUpdateInProgressTitle": "Updating {0}",
- "policyUpdateSuccessMessage": "Successfully updated {0}. Policy will be enabled in a few minutes if you have \"Enable policy\" set to \"On\".",
- "policyUpdateSuccessTitle": "Successfully updated {0}",
- "primaryCol": "Primary",
- "privateLinkLabel": "Microsoft Entra ID Private Link",
- "reportOnlyInfoBox": "Report-only mode: Policies are evaluated and logged at sign-in but do not impact users.",
- "requireAllControlsText": "Require all the selected controls",
- "requireCompliantDevice": "Require compliant device",
- "requireDomainJoined": "Require domain-joined device",
- "requireGrantReauth": "The \"sign-in frequency every time\" session control requires a \"require multifactor authentication\" or \"require password change\" grant control when \"All cloud apps\" is selected",
- "requireMFA": "Require multifactor authentication",
- "requireMfaReauth": "The \"sign-in frequency every time\" session control requires the \"require multifactor authentication\" grant control for \"sign-in risk\"",
- "requireOneControlText": "Require one of the selected controls",
- "requirePasswordChangeReauth": "The \"sign-in frequency every time\" session control requires the \"require password change\" grant control for \"user risk\"",
- "requireRiskReauth": "The \"sign-in frequency every time\" session control requires the \"user risk\" or \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthRiskNotEnabled": "The \"sign-in frequency every time\" session control is not available when \"all cloud apps\" is selected.",
- "requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
- "requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
- "resetFilters": "Reset filters",
- "sPRequired": "Service principal required",
- "sPSelectorInfoBalloon": "User or Service Principal you want to test",
- "saturday": "Saturday",
- "searchTextTooLongError": "The search text is too long. Maximum 256 characters",
- "securityDefaultsPolicyName": "Security defaults",
- "securityDefaultsTextMessage": "Security defaults must be disabled to enable Conditional Access policy.",
- "securityDefaultsUpdateInProgressText": "A security defaults update is in progress, please wait a moment and try again.",
- "securityDefaultsWarningMessage": "It looks like you're about to manage your organization's security configurations. That's great! You must first {0}disable security defaults{1} before enabling a Conditional Access policy.",
- "selectDevicePlatforms": "Select device platforms",
- "selectNamedNetworksSubtitle": "",
- "selectNamedNetworksTitle": "Select locations",
- "selectedSP": "Selected Service Principal",
- "servicePrincipalBladeExcludedSelectorTitle": "Select excluded service principals",
- "servicePrincipalBladeIncludedSelectorTitle": "Select service principals",
- "servicePrincipalDataGridAria": "List of available service principals",
- "servicePrincipalDropDownLabel": "What does this policy apply to?",
- "servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
- "servicePrincipalSelectionsAria": "Selected service principals grid",
- "servicePrincipalSelectorAria": "List of chosen service principals",
- "servicePrincipalSelectorMultiple": "{0} service principals selected",
- "servicePrincipalSelectorSingle": "1 service principal selected",
- "servicePrincipalSpecificExc": "Specific service principals excluded",
- "servicePrincipalSpecificInc": "Specific service principals included",
- "servicePrincipals": "Service principals",
- "sessionControlBladeTitle": "Session",
- "sessionControlDescriptionContent": "Control access based on session controls to enable limited experiences within specific cloud applications.",
- "sessionControlDisableInfo": "This control only works with supported apps. Currently, Office 365, Exchange Online, and SharePoint Online are the only cloud apps that support app enforced restrictions. Click here to learn more.",
- "sessionControlInfoBallonText": "Session controls enable limited experience within a cloud app.",
- "sessionControls": "Session controls",
- "sessionControlsAppEnforcedLabel": "Use app enforced restrictions",
- "sessionControlsCasLabel": "Use Conditional Access App Control",
- "sessionControlsSecureSignInLabel": "Require token binding",
- "sharepointAppName": "SharePoint",
- "signinRiskInclude": "{0} included",
- "signinRiskReauth": "\"Sign-in risk\" condition must be selected when \"Require multifactor authentication\" grant and \"sign-in frequency every time\" session control are selected",
- "signinRiskTriggerDescriptionContent": "Select the sign-in risk level",
- "singleTenantServicePrincipalInfoBallonText": "Policy only applies to single tenant service principals owned by your organization. Click here to learn more ",
- "specificSigninRiskLevelsOption": "Select specific sign-in risk levels",
- "specificUsersExcluded": "specific users excluded",
- "specificUsersIncluded": "Specific users included",
- "specificUsersIncludedAndExcluded": "Specific users excluded and included",
- "startDatePickerLabel": "Starts",
- "startFreeTrial": "Start a free trial",
- "startTimePickerLabel": "Start time",
- "sunday": "Sunday",
- "testButton": "What If",
- "thumbprintCol": "Thumbprint",
- "thursday": "Thursday",
- "timeConditionAllTimesLabel": "Any time",
- "timeConditionIntroText": "Configure the time this policy will apply to",
- "timeConditionSelectorInfoBallonContent": "When the user is signing in. For example, \"Wednesday 9am-5pm PST\"",
- "timeConditionSelectorLabel": "Time (Preview)",
- "timeConditionSpecificLabel": "Specific times",
- "timeSelectorAllTimesText": "Any time",
- "timeSelectorSpecificTimesText": "Specific times configured",
- "timeZoneDropdownInfoBalloonContent": "Select a time zone that defines the time range. This policy applies to users in all time zones. For example, 'Wednesday 9am - 5pm' for one user would be 'Wednesday 10am - 6pm' for a user in a different time zone.",
- "timeZoneDropdownLabel": "Time zone",
- "timeZoneDropdownPlaceholderText": "Select a time zone",
- "tooManyPoliciesDescription": "Only first 50 policies are being displayed now, click here to view all policies",
- "tooManyPoliciesTitle": "More than 50 policies found",
- "trustedLocationStatusIconDescription": "Location is trusted",
- "trustedLocationStatusIconEnabled": "Trusted status icon",
- "tuesday": "Tuesday",
- "uploadInBadState": "Unable to upload the specified file.",
- "upsellAppsDescription": "Require multifactor authentication for sensitive applications all the time or only from outside the company network.",
- "upsellAppsTitle": "Secure applications",
- "upsellBannerText": "Get a free Premium trial to use this feature",
- "upsellDataDescription": "Require device to be marked as compliant or Microsoft Entra hybrid joined to allow access to company resources.",
- "upsellDataTitle": "Secure data",
- "upsellDescription": "Conditional Access provides the control and protection you need to keep your corporate data secure, while giving your people an experience that allows them to do their best work from any device. For instance, you can restrict access from outside the company network or restrict access to devices which meet the compliance policies.",
- "upsellRiskDescription": "Require multifactor authentication for risk events detected by Microsoft's machine learning system.",
- "upsellRiskTitle": "Protect against risk",
- "upsellTitle": "Conditional Access",
- "upsellWhyTitle": "Why use Conditional Access?",
- "userAppNoneOption": "None",
- "userNamePlaceholderText": "Enter User Name",
- "userNotSetSeletorLabel": "0 users and groups selected",
- "userOnlySelectionBladeExcludeDescription": "Select the users to exempt from the policy",
- "userOrGroupSelectionCountDiffBannerText": "{0} configured in this policy have been deleted from the directory, but this doesn't affect the other users and groups in the policy. The next time you update the policy, the deleted users and/or groups will be automatically removed.",
- "userOrSPNotSetSelectorLabel": "0 users or workload identities selected",
- "userOrSPSelectionBladeTitle": "Users or workload identities",
- "userOrSPSelectorInfoBallonText": "Identities in the directory that the policy applies to, including users, groups, and service principals",
- "userRequired": "User Required",
- "userRiskErrorBox": "\"User risk\" condition must be selected when \"Require password change\" grant is selected",
- "userRiskReauth": "\"User risk\" condition and not \"Sign-in risk\" must be selected when \"Require password change\" grant and \"Sign-in frequency every time\" session control are selected",
- "userSPRequired": "User or Service principal required",
- "userSPSelectorTitle": "User or Workload identity",
- "userSelectionBladeAllUsersAndGroups": "All users and groups",
- "userSelectionBladeExcludeDescription": "Select the users and groups to exempt from the policy",
- "userSelectionBladeExcludeTabTitle": "Exclude",
- "userSelectionBladeExcludedSelectorTitle": "Select excluded users and groups",
- "userSelectionBladeIncludeDescription": "Select the users this policy will apply to",
- "userSelectionBladeIncludeTabTitle": "Include",
- "userSelectionBladeIncludedSelectorTitle": "Select",
- "userSelectionBladeSelectUsers": "Select users",
- "userSelectionBladeSelectedUsers": "Select users and groups",
- "userSelectionBladeTitle": "Users and groups",
- "userSelectorBladeTitle": "Users",
- "userSelectorExcluded": "{0} excluded",
- "userSelectorGroupPlural": "{0} groups",
- "userSelectorGroupSingular": "1 group",
- "userSelectorIncluded": "{0} included",
- "userSelectorInfoBallonText": "Users and groups in the directory that the policy applies to. For example, 'Pilot group'",
- "userSelectorSelected": "{0} selected",
- "userSelectorTitle": "User",
- "userSelectorUserAndGroup": "{0}, {1}",
- "userSelectorUserPlural": "{0} users",
- "userSelectorUserSingular": "1 user",
- "userSelectorWithExclusion": "{0} and {1}",
- "usersGroupsLabel": "Users and groups",
- "viewApprovedAppsText": "See list of approved client apps",
- "viewCompliantAppsText": "See list of policy protected client apps",
- "viewPolicyInformation": "View policy information",
- "vpnBladeTitle": "VPN connectivity",
- "vpnCertCreateFailedMessage": "Error: {0}",
- "vpnCertCreateFailedTitle": "Failed to create {0}",
- "vpnCertCreateInProgressTitle": "Creating {0}",
- "vpnCertCreateSuccessMessage": "Successfully created {0}.",
- "vpnCertCreateSuccessTitle": "Successfully created {0}",
- "vpnCertNoRowsMessage": "No VPN certificates found",
- "vpnCertUpdateFailedMessage": "Error: {0}",
- "vpnCertUpdateFailedTitle": "Failed to update {0}",
- "vpnCertUpdateInProgressTitle": "Updating {0}",
- "vpnCertUpdateSuccessMessage": "Successfully updated {0}.",
- "vpnCertUpdateSuccessTitle": "Successfully updated {0}",
- "vpnFeatureInfo": "For more information on VPN connectivity and Conditional Access, click here.",
- "vpnFeatureWarning": "Once a VPN certificate is created in the portal, Microsoft Entra ID will start using it immediately to issue short lived certificates to the VPN client. It is critical that the VPN certificate be deployed immediately to the VPN server to avoid any issues with credential validation of the VPN client.",
- "vpnMenuText": "VPN connectivity",
- "vpncertDropdownDefaultOption": "Duration",
- "vpncertDropdownInfoBalloonContent": "Select the duration for the cert you want to create",
- "vpncertDropdownLabel": "Select duration",
- "vpncertDropdownOneyearOption": "1 year",
- "vpncertDropdownThreeyearOption": "3 years",
- "vpncertDropdownTwoyearOption": "2 years",
- "wednesday": "Wednesday",
- "whatIfCountry": "Country/Region",
- "whatIfCountryInfo": "The country/region the user is signing in from.",
- "whatIfDevicePlatformInfo": "The device platform the user is signing in from.",
- "whatIfEnterIpAddress": "Enter IP address (ex: 40.77.182.32)",
- "whatIfErrorInvalidIpAddress": "An invalid IP address was specified.",
- "whatIfIpAddress": "IP address",
- "whatIfIpAddressInfo": "IP address the user is signing in from.",
- "whatIfIpCountryInfoBoxText": "If using an IP address or Country/Region, both fields will be required and should correctly map together.",
- "whatIfSelectCountry": "Select country/region...",
- "whatIfSelectDevicePlatform": "Select device platform...",
- "whatIfSelectPrivateLink": "Select private link...",
- "whatIfSelectSignInRisk": "Select sign-in risk...",
- "whatIfSignInRisk": "Sign-in risk",
- "whatIfSignInRiskInfo": "The risk level associated with the sign-in",
- "whatIfUnknownAreas": "Unknown Areas",
- "windows365InfoBox": "Selecting Windows 365 will affect connections to Cloud PCs and Azure Virtual Desktop session hosts. Click here to learn more.",
- "windowsDisplayName": "Windows",
- "windowsPhoneDisplayName": "Windows Phone",
- "workloadIdentities": "Workload identities (preview)",
- "workloadIdentitiesLicenseText": "A workload identities premium P1 or P2 license is required to edit this policy.",
- "workloadIdentity": "Workload identity"
- },
- "WindowsFeatureUpdate": {
- "EndOFSupportStatus": {
- "notSupported": "Not supported",
- "supportEnding": "Support ending",
- "supported": "Supported"
- }
- },
- "SecurityTemplate": {
- "aSR": "Attack surface reduction",
- "accountProtection": "Account protection",
- "allDevices": "All devices",
- "antivirus": "Antivirus",
- "antivirusReporting": "Antivirus Reporting (Preview)",
- "conditionalAccess": "Conditional access",
- "deviceCompliance": "Device compliance",
- "diskEncryption": "Disk encryption",
- "eDR": "Endpoint detection and response",
- "ePM": "Endpoint Privilege Management",
- "firewall": "Firewall",
- "helpSupport": "Help and support",
- "setup": "Setup",
- "wdapt": "Microsoft Defender for Endpoint"
- },
- "Win32ReturnCodes": {
- "CodeTypes": {
- "failed": "Failed",
- "hardReboot": "Hard reboot",
- "retry": "Retry",
- "softReboot": "Soft reboot",
- "success": "Success"
- },
- "Columns": {
- "codeType": "Code type",
- "returnCode": "Return code"
- },
- "bladeTitle": "Return codes",
- "gridAriaLabel": "Return codes",
- "header": "Specify return codes to indicate post-installation behavior:",
- "onAddAnnounceMessage": "Return code added item {0} of {1}",
- "onDeleteSuccess": "Return code {0} deleted successfully",
- "returnCodeAlreadyUsedValidation": "Return code is already used.",
- "returnCodeMustBeIntegerValidation": "Return code should be an integer.",
- "returnCodeShouldBeAtLeast": "Return code should be at least {0}.",
- "returnCodeShouldBeAtMost": "Return code should be at most {0}.",
- "selectorLabel": "Return codes"
- },
- "NotificationMessage": {
- "NotificationMessageTemplatesTab": {
- "arabic": "Arabic",
- "bulgarian": "Bulgarian",
- "chineseSimplified": "Chinese (Simplified)",
- "chineseTraditional": "Chinese (Traditional)",
- "croatian": "Croatian",
- "czech": "Czech",
- "danish": "Danish",
- "dutch": "Dutch",
- "englishUK": "English (United Kingdom)",
- "englishUS": "English (United States)",
- "estonian": "Estonian",
- "finnish": "Finnish",
- "frenchCanada": "French (Canada)",
- "frenchFrance": "French (France)",
- "german": "German",
- "greek": "Greek",
- "hebrew": "Hebrew",
- "hungarian": "Hungarian",
- "italian": "Italian",
- "japanese": "Japanese",
- "korean": "Korean",
- "latvian": "Latvian",
- "lithuanian": "Lithuanian",
- "norwegian": "Norwegian, Bokmål",
- "polish": "Polish",
- "portugueseBrazil": "Portuguese (Brazil)",
- "portuguesePortugal": "Portuguese (Portugal)",
- "romanian": "Romanian",
- "russian": "Russian",
- "serbian": "Serbian",
- "slovak": "Slovak",
- "slovenian": "Slovenian",
- "spanishMexico": "Spanish (Mexico)",
- "spanishSpain": "Spanish (Spain)",
- "swedish": "Swedish",
- "thai": "Thailand",
- "turkish": "Turkish",
- "ukrainian": "Ukrainian"
- },
- "Summary": {
- "placeholder": "Select a notification message from the left to preview contents."
- },
- "companyContact": "Show contact information",
- "companyLogo": "Show company logo",
- "companyName": "Show company name",
- "createEditDescription": "Create or edit notification message templates.",
- "createMessage": "Create message",
- "deviceDetails": "Show device details",
- "deviceDetailsInfoBox": "This setting is turned off by default, as retrieving device details can cause a delay in email notifications being received.",
- "editImpactInfo": "Editing this notification message template will affect all policies which are using this template.",
- "editMessage": "Edit message",
- "email": "email",
- "emailFooterTitle": "Email Footer",
- "emailHeaderFooterInfo": "Email header and footer settings for email notifications rely on Customization settings within the Tenant admin node in Endpoint manager.",
- "emailHeaderTitle": "Email Header",
- "emailInfoMoreLink": "https://go.microsoft.com/fwlink/?linkid=2200912",
- "emailInfoMoreText": "Configure Customization settings",
- "formSubTitle": "Create or modify notification emails",
- "headerFooterSettingsTab": "Header and footer settings",
- "imgPreview": "Image Preview",
- "infotext": "Select a notification messsage. To create a new notification, please visit Notification in the Manage section of the Set Device Compliance workload.",
- "iwLink": "Show company portal website link",
- "listEmpty": "No message templates.",
- "listEmptySelectOnly": "No message templates. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "listSubTitle": "List of notification message templates",
- "listTitle": "Notification message templates",
- "localizedNotificationMessageTemplates": "Localized notification message templates",
- "messageAssigned": "Cannot delete this message template, because it is currently being used by one or more compliance policies.",
- "messageCapitalized": "Notification message template",
- "messageLowercase": "notification message template",
- "missingDefaultError": "Select a default template",
- "notificationMessageTemplates": "Notification message templates",
- "rowValidationError": "At least one message template is required",
- "selectDescription": "Select a notification message. To create a new notification, please visit Notifications in the Manage section of the Set Device Compliance workload.",
- "tenantValueText": "Tenant Value",
- "testEmailLabel": "Send preview email",
- "localeLabel": "Locale",
- "isDefaultLocale": "Is Default"
- },
- "WindowsQualityUpdateProfile": {
+ "WindowsFeatureUpdateProfile": {
"Details": {
- "DaysUntilForcedReboot": {
- "label": "Number of days to wait before restart is enforced"
- },
"Description": {
"label": "Description"
},
+ "FeatureDeploymentSettings": {
+ "header": "Feature deployment settings"
+ },
+ "FeatureUpdateVersion": {
+ "infoballoon": "This feature cannot downgrade a device.",
+ "label": "Feature update to deploy"
+ },
+ "GradualRolloutEndDate": {
+ "label": "Final group availability"
+ },
+ "GradualRolloutInterval": {
+ "label": "Days between groups"
+ },
+ "GradualRolloutStartDate": {
+ "label": "First group availability"
+ },
"Name": {
"label": "Name"
},
- "QualityUpdateRelease": {
- "label": "Expedite installation of quality updates if device OS version less than:"
- },
- "bladeTitle": "Quality updates Windows 10 and later (preview)",
- "loadError": "Loading failed!"
+ "OptionalUpdate": {
+ "label": "Required or optional update"
+ },
+ "RolloutOptions": {
+ "label": "Rollout options"
+ },
+ "RolloutSettings": {
+ "header": "When would you like to make the update available in Windows Update?"
+ },
+ "ScopeSettings": {
+ "header": "Configure scope tags for this policy."
+ },
+ "StartDateOnlyStartDate": {
+ "label": "First available date"
+ },
+ "Windows11SideBySideInstall": {
+ "disabled": "Disabled",
+ "enabled": "Enabled",
+ "infoBalloonContent": "Control whether to install the latest Windows 10 feature update to devices not eligible for Windows 11",
+ "label": "When a device isn't eligible to run Windows 11, install the latest Windows 10 feature update",
+ "notApplicable": "Not Applicable",
+ "summaryLabel": "Install Windows 10 on devices not eligible to run Windows 11"
+ },
+ "bladeTitle": "Feature update deployments",
+ "deploymentSettingsTitle": "Deployment settings",
+ "loadError": "Loading failed!",
+ "windows11EULA": "By selecting this Feature update to deploy you are agreeing that when applying this operating system to a device either (1) the applicable Windows license was purchased though volume licensing, or (2) that you are authorized to bind your organization and are accepting on its behalf the relevant Microsoft Software License Terms to be found here {0}."
},
+ "Notifications": {
+ "deploymentSaved": "\"{0}\" has been saved.",
+ "newFeatureUpdateDeploymentCreated": "New feature update deployment created."
+ },
"TabName": {
- "qualityUpdateSettings": "Settings"
+ "deploymentSettings": "Deployment settings",
+ "groupAssignmentSettings": "Assignments",
+ "scopeSettings": "Scope tags"
},
- "infoBoxText": "The only dedicated quality update control currently available other than the existing update rings policy for Windows 10 and later is the ability to expedite quality updates for devices that fall behind a specified patch level. Additional controls will be available in the future.",
- "licenseLearnMoreText": "Learn more about pre-requisites and quality update policies.",
- "licenseWarningBoxText": "Creating quality update policies requires specific licensing.",
- "warningBoxText": "While expediting software updates can help decrease the time to get to compliance when necessary, it has a larger impact on end-user productivity. The chances that they will experience a restart during business hours is significantly increased."
+ "gradualRolloutLicenseWarning": "This capability requires specific licensing.",
+ "gradualRolloutLicenseWarningEdit": "This capability may continue to be used and configured until the policy is saved without this capability selected.",
+ "licenseLearnMoreText": "Learn more about pre-requisites and feature update policies.",
+ "optionalUpdateWarning": "Optional is available for Windows 11 updates only",
+ "profileNameWarning": "Name should be less than 64 characters",
+ "specificLicensingRequired": "Some selected capabilities require specific licensing."
},
"AzureCA": {
"AdrsUserActionSelectionWarning": {
@@ -10001,6 +11393,11 @@
"title": "Cloud apps or actions"
},
"CloudappsSelectionBlade": {
+ "AllInternetResources": {
+ "excludedWithGSA": "All internet resources with Global Secure Access excluded",
+ "excludedWithGSALower": "all internet resources with Global Secure Access excluded",
+ "withGSA": "All internet resources with Global Secure Access"
+ },
"Excluded": {
"gridAria": "List of excluded cloud apps"
},
@@ -10069,6 +11466,7 @@
"policySummaryPerUserMfaV2": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummaryPerUserMfaViaGroup": "This policy covers per-user multifactor authentication enforced users with recent sign-ins and requires them to perform MFA while accessing cloud applications. There will be no change to the end user experience as a result of this policy and your organization is sufficiently licensed to use this policy. We'll assign eligible users into a new security group named 'Conditional Access: Per-user multifactor authentication users (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e97)'. Currently, the policy is in '{0}' mode. As a Microsoft-managed policy, only certain properties are editable.",
"policySummarySignInRisk": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. If users aren't registered for MFA, this policy will block their risky sign-ins to prevent MFA registration by an unauthorized actor. As a Microsoft-managed policy, only certain properties are editable.",
+ "policySummarySignInRiskViaGroup": "High sign-in risk represents a high probability that the given authentication request isn't authorized by the identity owner. This policy incorporates high sign-in risk detections from Entra ID Protection in real-time to trigger multifactor authentication and reauthentication to prevent identity compromise. We'll assign eligible users into a new security group named 'Conditional Access: Risky sign-in multifactor authentication (a4ea6c0f-b8fb-4d29-91f1-9f8cf0601e98)'. As a Microsoft-managed policy, only certain properties are editable.",
"recActionsGlobal1": "Review the policy and its benefits.",
"recActionsGlobal2": "When you are ready to enable, switch its state to 'on'. If you do not want to enforce this policy for your organization, switch its state to 'off'. If you leave the policy in report-only mode, we will enable it for you.",
"recActionsMfa1": "Exclude one or more break glass accounts from the policy.",
@@ -10085,6 +11483,7 @@
"securityDefaultsBasedMMPolicyRecommendationOverview": "Microsoft recommends leaving this policy enabled. If you need to make modifications beyond what is allowed in a Microsoft-managed policy, you can clone this policy and make those edits. Keep in mind that doing so will prevent Microsoft from improving the security posture for your organization through this policy.",
"signInRiskActions1": "Exclude one or more break glass accounts from the policy.",
"signInRiskActions2": "While we have scoped this policy to include users who are already enabled for multifactor authentication, we recommend you verify this using the report below as an extra precaution to prevent users from being locked out.",
+ "signInRiskActionsViaGroup1": "This policy relies on its corresponding security group to function. We recommend you keep the group even if you don't intend to use the policy now.",
"summary": "Summary"
},
"MsGraphErrors": {
@@ -10125,17 +11524,6 @@
"Grid": {
"aria": "List of countries"
},
- "IpRanges": {
- "addIpRangeButtonAriaLabel": "Add IP range",
- "deleteButtonAriaLabel": "Delete {0} IP range.",
- "headerDescription": "Configure named location IPv4 and IPv6 ranges.",
- "headerLearnMoreAriaLabel": "Learn more about IP range named locations."
- },
- "Label": {
- "addCountries": "Countries location",
- "addIpRange": "IP ranges location",
- "addPrivateLink": "Azure Private Links"
- },
"NetworkAccess": {
"headerDescription": "Configure Network Access locations of my tenant.",
"headerLearnMoreAriaLabel": "Learn more about Network Access locations.",
@@ -10195,15 +11583,8 @@
"PrivateLinks": {
"grid": "List of Private Links"
},
- "Trusted": {
- "title": "Trusted type",
- "trusted": "Trusted"
- },
"Type": {
- "all": "All types",
"countries": "Countries",
- "ipRanges": "IP ranges",
- "networkAccess": "Network Access",
"privateLinks": "Private Links",
"serviceTags": "Service tags (Preview)",
"title": "Location type"
@@ -10239,6 +11620,12 @@
"trafficProfilesLearnMoreTooltip": "You can apply policies to the network traffic that your organization needs to secure and manage.",
"ztnaEnableLearnMore": "Zero Trust Cloud Edge needs to be turned on to use network access controls. "
},
+ "NetworkLocations": {
+ "ValidateTenantOnboardedAndAdaptiveAccessSignalingEnabledInGSA": {
+ "infoBox": "To create a Conditional Access policy ensuring your tenant's members are coming from their compliant network, make sure Global Secure Access (GSA) is deployed and Adaptive Access Signaling in GSA is enabled in your tenant. Learn more on how to ",
+ "learnMoreLabel": "enable GSA Adaptive Access Signaling."
+ }
+ },
"Overview": {
"SignInsProtectedByCa": {
"accessDenied": "Access denied",
@@ -10262,17 +11649,6 @@
"userActionRequired": "User action required (report-only)"
}
},
- "Policies": {
- "Grid": {
- "aria": "List of Conditional Access policies"
- },
- "countText": "{0} out of {1} policies found",
- "countTextSingular": "{0} out of 1 policy found",
- "search": "Search policies"
- },
- "PoliciesList": {
- "reactPoliciesAnnouncement": "This view will soon be replaced by the enhanced conditional access policy listing experience that supports granular filtering of policies."
- },
"Policy": {
"Condition": {
"ServicePrincipalRisk": {
@@ -10295,10 +11671,10 @@
"authenticationTransfer": "Authentication transfer",
"deviceCodeFlow": "Device code flow",
"infoBalloon": "How your organization uses certain authentication and authorization protocols and grants",
- "label": "Authentication flows",
+ "label": "Authentication flows (Preview)",
"multiple": "\"{0}\" and \"{1}\""
},
- "singular": "Authentication flow"
+ "singular": "Authentication flow (Preview)"
},
"DeviceAttributes": {
"AssignmentFilter": {
@@ -10407,6 +11783,11 @@
"plural": "{0} custom roles are included or excluded in this policy but don't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. ",
"singular": "1 custom role is included or excluded in this policy but doesn't affect the users and groups in the policy. Only built-in roles are enforced. You will need to remove the custom roles before saving this policy. "
},
+ "GSA": {
+ "Banner": {
+ "message": " This policy was built using a previous data model. Once you save this policy, it will be migrated to the new data model. The policy will continue to work with no interruptions."
+ }
+ },
"LearnMore": {
"ariaLabel": "Learn more about building a Conditional Access policy.",
"conditions": "Control access based on signals from conditions like risk, device platform, location, client apps, or device state.",
@@ -10429,7 +11810,8 @@
"readOnly": "This view is a read-only view of this policy. To change it, please click here to visit the \"{0}\" page."
},
"subtitle": "Conditional Access policy",
- "tabLabel": "Policy"
+ "tabLabel": "Policy",
+ "viewPolicyImpact": "View policy impact"
},
"PolicyCondition": {
"InsiderRisk": {
@@ -10506,6 +11888,11 @@
"reportOnly": "Report-only",
"stagedRollout": "Staged rollout"
},
+ "ResourcesSelectionBlade": {
+ "Exclude": {
+ "description": "Select the resources to exempt from the policy"
+ }
+ },
"SSM": {
"MemberSelector": {
"description": "Users and groups"
@@ -10589,7 +11976,7 @@
"disableError": "Continuous access evaluation \"Disable\" can only be used when policy is assigned to \"All cloud apps\" and no conditions are selected.",
"disableText": "Disable continuous access evaluation (CAE) only works correctly when \"{0}\" is selected, and no conditions has been chosen. Please change your cloud apps and condition selections.",
"helpLabel": "See list of supported clients and resource providers",
- "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.\n\n[Learn More][1]\n[1]: https://go.microsoft.com/fwlink/?linkid=2135010\n",
+ "infoBalloonText": "Continuous Access Evaluation (CAE) allows access tokens to be revoked based on critical events and policy evaluation in real time rather than relying on token expiration based on lifetime.\n* \"{0}\" works correctly when \"{1}\" is selected, and no condition has been chosen.\n* This setting does not work with report-only mode, but there are pre-published workbooks with data insights.",
"label": "Continuous access evaluation settings",
"none": "None",
"notAvailableText": "Continuous access evaluation (CAE) controls will not be available unless you enable CAE for all users.",
@@ -10605,7 +11992,8 @@
"dropdownDefaultTextProfile": "Select a security profile",
"infoboxSecurityProfileLoadFailedText": "Security profile assignment has been temporarily disabled due to a system error.",
"infoboxSecurityProfileLoadFailedWithExistingProfileText": "Security profile assignment has been temporarily disabled due to a system error. This policy has an assigned profile.",
- "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource. ",
+ "infoboxTargetResourceRequirementText": "This option only works with \"Global Secure Access\" as the targeted resource.",
+ "infoboxTargetResourceRequirementTextGSA": "This option only works with Global Secure Access resources.",
"selectorDisplayText": "Conditional Access Network Control selected",
"tooltip": "Use this option to apply a policy profile for Global Secure Access targeted resources."
},
@@ -10641,7 +12029,7 @@
},
"Option": {
"always": "Always persistent",
- "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window. \n
\n
This setting works correctly when \"All cloud apps\" are selected
\n
This does not affect token lifetimes or the sign-in frequency setting.
\n
This will override the \"Show option to stay signed in\" policy in Company Branding.
\n
\"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.
\n
\"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.
\n",
+ "help": "A persistent browser session allows users to remain signed in after closing and reopening their browser window.\n* This setting works correctly when \"All cloud apps\" are selected.\n* This does not affect token lifetimes or the sign-in frequency setting.\n* This will override the \"Show option to stay signed in\" policy in Company Branding.\n* \"Never persistent\" will override any persistent SSO claims passed in from federated authentication services.\n* \"Never persistent\" will prevent SSO on mobile devices across applications and between applications and the user's mobile browser.",
"label": "Persistent browser session",
"never": "Never persistent"
},
@@ -10703,6 +12091,11 @@
"failed": "Unable to load this data.",
"reattempt": "Loading data. Reattempt {0} of {1}."
},
+ "TargetResources": {
+ "ValidateTenantOnboardedToGSA": {
+ "infobox": "To create a Conditional Access policy targeting members in your tenant with Global Secure Access (GSA) as a resource, make sure GSA is deployed in your tenant."
+ }
+ },
"TimeCondition": {
"Errors": {
"both": "Invalid \"Include\" or \"Exclude\" time range.",
@@ -10818,6 +12211,7 @@
"blockExchange": "Selecting Office 365 Exchange Online will also affect apps such as OneDrive and Teams.",
"blockPortal": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal.",
"blockPortalWithSession": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All cloud apps\" are selected.",
+ "blockPortalWithSessionGSAGovParity": "Don't lock yourself out! This policy impacts the Azure portal. Before you continue, ensure that you or someone else will be able to get back into the portal. Disregard this warning if you are configuring persistent browser session policy that works correctly only if \"All resources\" are selected.",
"blockSharePoint": "Selecting SharePoint Online will also affect apps such as Microsoft Teams, Planner, Delve, MyAnalytics, and Newsfeed.",
"blockSkype": "Selecting Skype for Business Online will also affect Microsoft Teams.",
"includeOrExclude": "You can configure the App Filter for '{0}' or '{1}', but not both.",
@@ -10875,7 +12269,6 @@
"authenticationStrength": "Authentication strength",
"loadingPermissions": "Loading permissions..."
},
- "actionRequiredNoName": "Action required - no name",
"advancedTabText": "Advanced",
"allCloudAppsErrorBox": "\"All cloud apps\" must be selected when \"Require password change\" grant is selected",
"allCloudAppsReauth": "\"All cloud apps\" must be selected when \"Sign-in frequency every time\" session control and \"sign-in risk\" condition are selected",
@@ -10884,7 +12277,7 @@
"allDevicePlatforms": "Any device",
"allGuestUserInfoContent": "Includes Microsoft Entra B2B guests, but not SharePoint B2B guests",
"allGuestUserLabel": "All guest and external users",
- "allNetworkAccessLocationsLabel": "All Compliant Network locations (Preview)",
+ "allNetworkAccessLocationsLabel": "All Compliant Network locations",
"allRiskLevelsOption": "All risk levels",
"allTrustedLocationLabel": "All trusted locations",
"allTrustedNetworkLocationLabel": "All trusted networks and locations",
@@ -11103,12 +12496,13 @@
"cloudAppCountDiffBannerText": "{0} cloud apps configured in this policy have been deleted from the directory, but this doesn't affect the other apps in the policy. The next time you update the application section of the policy, the deleted apps will be automatically removed from it.",
"cloudAppsSelectionBladeAllMicrosoftApps": "All Microsoft apps",
"cloudappsSelectionBladeAllCloudapps": "All cloud apps",
+ "cloudappsSelectionBladeAllResources": "All resources (formerly 'All cloud apps')",
"cloudappsSelectionBladeExcludeDescription": "Select the cloud apps to exempt from the policy",
"cloudappsSelectionBladeExcludedSelectorTitle": "Select excluded cloud apps",
"cloudappsSelectionBladeIncludeDescription": "Select the cloud apps this policy will apply to",
"cloudappsSelectionBladeIncludedSelectorTitle": "Select",
"cloudappsSelectionBladeSelectedCloudapps": "Select apps",
- "cloudappsSelectionBladeSelectedResources": "Select Resources",
+ "cloudappsSelectionBladeSelectedResources": "Select resources",
"cloudappsSelectorInfoBallonText": "Services which the user accesses to do work. For example, 'Salesforce'",
"cloudappsSelectorNone": "No cloud apps, actions, or authentication context selected",
"cloudappsSelectorPluralExcluded": "{0} apps excluded",
@@ -11144,7 +12538,6 @@
"controlsRequirePasswordResetInfoBubble": "Require password change to lower user risk. This option also requires multifactor authentication or authentication strength controls. Other controls can't be used.",
"countriesRadiobuttonInfoBalloonContent": "The country/region a sign-in is coming from is determined by the user's IP address.",
"createNewVpnCert": "New certificate",
- "createdTimeLabel": "Creation time",
"customRoleLabel": "Custom roles (not supported)",
"dateRangeTypeLabel": "Date range",
"daysOfWeekPlaceholderText": "Filter days of the week",
@@ -11181,10 +12574,6 @@
"directoryRoleInfoContent": "Assign policy to built-in directory roles.",
"directoryRolesLabel": "Directory roles",
"discardbutton": "Discard",
- "downloadDefaultFileName": "IP Ranges",
- "downloadExampleFileName": "Example",
- "downloadExampleHeader": "This is an example file with demonstrations of the kinds of data which can be accepted. Lines starting with # will be ignored.",
- "duplicate": "Duplicate",
"duplicatePolicyName": "{0} COPY",
"elevatedRisk": "Elevated",
"endDatePickerLabel": "Ends",
@@ -11202,9 +12591,7 @@
"friday": "Friday",
"grantControls": "Grant controls",
"gridNetworkTrusted": "Trusted",
- "gridPolicyCreatedDateTime": "Creation Date",
"gridPolicyEnabled": "Enabled",
- "gridPolicyModifiedDateTime": "Modified Date",
"gridPolicyName": "Policy Name",
"gridPolicyState": "State",
"groupSelectionBladeExcludeDescription": "Select the groups to exempt from the policy",
@@ -11212,20 +12599,6 @@
"groupSelectionBladeSelect": "Select groups",
"groupSelectorInfoBallonText": "Groups in the directory that the policy applies to. For example, 'Pilot group'",
"groupsSelectionBladeTitle": "Groups",
- "helpCommonScenariosText": "Interested in common scenarios?",
- "helpCondition1": "When any user is outside the company network",
- "helpCondition2": "When users in the 'Managers' group sign-in",
- "helpConditionsTitle": "Conditions",
- "helpControl1": "They're required to sign in with multifactor authentication",
- "helpControl2": "They are required be on an Intune compliant or domain-joined device",
- "helpControlsTitle": "Controls",
- "helpIntroText": "Conditional Access gives you the ability to enforce access requirements when specific conditions occur. Let's take a few examples",
- "helpIntroTitle": "What is Conditional Access?",
- "helpLearnMoreText": "Want to learn more about Conditional Access?",
- "helpStartStep1": "Create your first policy by clicking \"+ New policy\"",
- "helpStartStep2": "Specify policy Conditions and Controls",
- "helpStartStep3": "When you are done, don't forget to Enable policy and Create",
- "helpStartTitle": "Get started",
"highRisk": "High",
"includeAndExcludeAppsTextFormat": "Include: {0}. Exclude: {1}.",
"includeAppsTextFormat": "Include: {0}.",
@@ -11242,12 +12615,10 @@
"loadAll": "Load all",
"loading": "Loading...",
"locationConfigureNamedLocationsText": "Configure all trusted locations",
- "locationConfigureNamedLocationsUri": "{0}/usermanagement/mfasettings.aspx?tenantid={1}&culture={2}",
"locationNameTooLongError": "Location name is too long. Maximum is 256 characters",
"locationSelectionBladeExcludeDescription": "Select the locations to exempt from the policy",
"locationSelectionBladeIncludeDescription": "Select the locations to include in this policy",
"locationsAllLocationsLabel": "Any location",
- "locationsAllNamedLocationsLabel": "All trusted IPs",
"locationsAllNetworkLocationsLabel": "Any network or location",
"locationsAllPrivateLinksLabel": "All Private Links in my tenant",
"locationsIncludeExcludeLabel": "{0} and exclude all trusted IPs",
@@ -11272,7 +12643,6 @@
"microsoftAdminPortalsInfoBox": "The admin portals include Microsoft 365 admin center, Exchange admin center, Azure portal, Microsoft Entra admin center, and others.",
"minorRisk": "Minor",
"moderateRisk": "Moderate",
- "modifiedTimeLabel": "Modified time",
"monday": "Monday",
"nameLabel": "Name",
"namedLocationCountryInfoBanner": "As of May 2023, both IPv4 and IPv6 addresses are mapped to countries/regions.",
@@ -11286,7 +12656,6 @@
"namedNetworkDeleteCommand": "Delete",
"namedNetworkDeleteDescription": "Are you sure you want to delete '{0}'? This action cannot be undone.",
"namedNetworkDeleteTitle": "Are you sure?",
- "namedNetworkDownloadIpRange": "Download",
"namedNetworkInvalidRange": "Value must be a valid IP range.",
"namedNetworkIpRangeNeeded": "You need at least one valid IP range",
"namedNetworkIpRangesDescriptionContent": "Configure your organization's IP ranges",
@@ -11322,7 +12691,6 @@
"namedNetworkUploadInProgressTitle": "Parsing '{0}'",
"namedNetworkUploadInvalidDescription": "'{0}' is either too large or in an invalid format.",
"namedNetworkUploadInvalidTitle": "'{0}' Invalid",
- "namedNetworkUploadIpRange": "Upload",
"namedNetworkUploadSuccessDescription": "{0} lines analyzed. {1} in a bad format. {2} skipped.",
"namedNetworkUploadSuccessTitle": "Finished parsing '{0}'",
"namedNetworksAdd": "New named location",
@@ -11353,10 +12721,7 @@
"partialEnablementTargetRegionsError": "Select at least one target region",
"passwordChangeRequireEmptyExclude": "Cannot exclude apps when \"Require password change\" grant is selected.",
"pickerDoneCommand": "Done",
- "policiesBladeAdPremiumUpsellBannerText": "Create your own policies and target specific conditions like cloud apps, sign-in risk, and device platforms with Microsoft Entra ID Premium",
"policiesBladeTitle": "Policies",
- "policiesBladeTitleWithAppName": "Policies: {0}",
- "policiesDisabledBannerText": "Creating and editing policies is prohibited for applications with a linked single-sign-on attribute.",
"policiesHitMaxLimitStatusBarMessage": "You've reached the maximum number of policies for this tenant. Delete some policies before creating more.",
"policiesNewTabBadge": "NEW",
"policyAssignmentsSection": "Assignments",
@@ -11375,7 +12740,6 @@
"policyConditionMediumUserRiskCheckboxAriaLabel": "Group, configure user risk levels needed for policy to be enforced. Medium user risk level.",
"policyConditionNetwork": "Network",
"policyConditionNetworkLocationDescription": "Network and locations (determined by IP address range or GPS coordinates) the user is signing in from",
- "policyConditionNetworks": "Networks",
"policyConditionSigninRisk": "Sign-in risk",
"policyConditionSigninRiskCiamDescription": "Sign-in risk condition is currently in preview. Pricing information will be available at a later date",
"policyConditionSigninRiskDescription": "Likelihood that the sign-in is coming from someone other than the user. Risk level can be high, medium or low. Requires Microsoft Entra ID P2 license.",
@@ -11469,7 +12833,10 @@
"requireRiskReauthSignInOnly": "The \"sign-in frequency every time\" session control requires the \"sign-in risk\" session control when \"all cloud apps\" is selected.",
"requireRiskReauthUserOnly": "The \"sign-in frequency every time\" session control requires the \"user risk\" session control when \"all cloud apps\" is selected.",
"resetFilters": "Reset filters",
- "resourcesSelectionBladeAllResources": "All resources",
+ "resourcesSelectorPluralExcluded": "{0} resources excluded",
+ "resourcesSelectorPluralIncluded": "{0} resources included",
+ "resourcesSelectorSingularExcluded": "1 resource excluded",
+ "resourcesSelectorSingularIncluded": "1 resource included",
"sPRequired": "Service principal required",
"sPSelectorInfoBalloon": "User or Service Principal you want to test",
"saturday": "Saturday",
@@ -11488,8 +12855,6 @@
"servicePrincipalDataGridAria": "List of available service principals",
"servicePrincipalDropDownLabel": "What does this policy apply to?",
"servicePrincipalInfoBox": "Some conditions are not available due to '{0}' selection in policy assignment",
- "servicePrincipalRadioAll": "All owned service principals",
- "servicePrincipalRadioSelect": "Select service principals",
"servicePrincipalSelectionsAria": "Selected service principals grid",
"servicePrincipalSelectorAria": "List of chosen service principals",
"servicePrincipalSelectorMultiple": "{0} service principals selected",
@@ -11665,734 +13030,49 @@
"workloadIdentity": "Workload identity",
"SessionControlsLabel": "Session controls"
},
- "ArchitectureOptions": {
- "sixtyFourBit": "64-bit",
- "thirtyTwoBit": "32-bit"
- },
- "TACSettings": {
- "edgeSettings": "Edge configuration settings",
- "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
- "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
- "generalAppConfig": "General app configuration",
- "generalSettings": "General configuration settings",
- "outlookSMIMEConfig": "Outlook S/MIME settings",
- "outlookSettings": "Outlook configuration settings",
- "sMIME": "S/MIME"
- },
- "MicrosoftEdgeChannel": {
- "beta": "Beta",
- "dev": "Dev",
- "stable": "Stable"
- },
- "WipPolicySettings": {
- "addNetworkBoundary": "Add network boundary",
- "addNetworkBoundaryButton": "Add network boundary...",
- "allowWindowsSearch": "Allow Windows Search to search encrypted corporate data and Store apps",
- "authoritativeIpRanges": "Enterprise IP Ranges list is authoritative (do not auto-detect)",
- "authoritativeProxyServers": "Enterprise Proxy Servers list is authoritative (do not auto-detect)",
- "boundaryType": "Boundary type",
- "cloudResources": "Cloud resources",
- "corporateIdentity": "Corporate identity",
- "dataRecoveryCert": "Upload a Data Recovery Agent (DRA) certificate to allow recovery of encrypted data",
- "editNetworkBoundary": "Edit network boundary",
- "enrollmentState": "Enrollment state",
- "iPv4Ranges": "IPv4 ranges",
- "iPv6Ranges": "IPv6 ranges",
- "internalProxyServers": "Internal proxy servers",
- "maxInactivityTime": "Maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked",
- "maxPasswordAttempts": "Number of authentication failures allowed before the device will be wiped",
- "mdmDiscoveryUrl": "MDM discovery URL",
- "mdmRequiredSettingsInfo": "This policy only applies to Windows 10 Anniversary Edition and higher. This policy uses Windows Information Protection (WIP) to apply protection.",
- "minimumPinLength": "Set the minimum number of characters required for the PIN",
- "name": "Name",
- "networkBoundariesGridEmptyText": "Any network boundaries you add will show up here",
- "networkBoundary": "Network boundary",
- "networkDomainNames": "Network domains",
- "neutralResources": "Neutral resources",
- "passportForWork": "Use Windows Hello for Business as a method for signing into Windows",
- "pinExpiration": "Specify the period of time (in days) that a PIN can be used before the system requires the user to change it",
- "pinHistory": "Specify the number of past PINs that can be associated to a user account that can’t be reused",
- "pinLowercaseLetters": "Configure the use of lowercase letters in the Windows Hello for Business PIN",
- "pinSpecialCharacters": "Configure the use of special characters in the Windows Hello for Business PIN",
- "pinUppercaseLetters": "Configure the use of uppercase letters in the Windows Hello for Business PIN",
- "protectUnderLock": "Prevent corporate data from being accessed by apps when the device is locked. Applies only to Windows 10 Mobile",
- "protectedDomainNames": "Protected domains",
- "proxyServers": "Proxy servers",
- "requireAppPin": "Disable app PIN when device PIN is managed",
- "requiredSettings": "Required settings",
- "requiredSettingsInfo": "Changing the scope or removing this policy will decrypt corporate data.",
- "revokeOnMdmHandoff": "Revoke access to protected data when the device enrolls to MDM",
- "revokeOnUnenroll": "Revoke encryption keys on unenroll",
- "rmsTemplateForEdp": "Specify the template ID to use for Azure RMS",
- "showWipIcon": "Show the enterprise data protection icon",
- "type": "Type",
- "useRmsForWip": "Use Azure RMS for WIP",
- "value": "Value",
- "weRequiredSettingsInfo": "This policy only applies to Windows 10 Creators Update and higher. This policy uses Windows Information Protection (WIP) and Windows MAM to apply protection.",
- "wipProtectionMode": "Windows Information Protection mode",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
+ "Platform": {
+ "all": "All",
+ "android": "Android device administrator",
+ "androidAOSP": "Android (AOSP)",
+ "androidEnterprise": "Android Enterprise",
+ "androidForWork": "Android Enterprise",
+ "androidWorkProfile": "Android enterprise",
+ "common": "Common",
+ "iOS": "iOS/iPadOS",
+ "iosAndAndroidPlatformLabel": "iOS and Android",
+ "iosCommaAndroidPlatformLabel": "iOS, Android",
+ "linux": "Linux",
+ "macOS": "macOS",
+ "unknown": "Unknown",
+ "unsupported": "Unsupported",
+ "windows": "Windows",
+ "windows10": "Windows 10 and later",
+ "windows10CM": "Windows 10 and later (ConfigMgr)",
+ "windows10Holo": "Windows 10 Holographic",
+ "windows10Mobile": "Windows 10 Mobile",
+ "windows10Team": "Windows 10 Team",
+ "windows10X": "Windows 10X",
+ "windows8": "Windows 8.1 and later",
+ "windows8And10": "Windows 8 and 10",
+ "windowsPhone": "Windows Phone 8.1",
+ "windows10AndLater": "Windows 10 and later",
+ "windows10AndWindowsServer": "Windows 10, Windows 11, and Windows Server (ConfigMgr)",
+ "windows10andLaterCM": "Windows 10 and later (ConfigMgr)",
+ "holoLens": "HoloLens",
+ "surfaceHub2": "Surface Hub 2",
+ "surfaceHub2S": "Surface Hub 2S",
+ "windowsPC": "Windows PC"
+ },
+ "InstallIntent": {
+ "available": "Available for enrolled devices",
+ "availableWithoutEnrollment": "Available with or without enrollment",
+ "required": "Required",
+ "uninstall": "Uninstall"
+ },
+ "AssignmentFilters": {
+ "assignmentFilterColumnHeader": "Filter",
+ "noFilters": "None"
},
- "PolicySelection": {
- "Grid": {
- "Column": {
- "author": "Author",
- "template": "Template name"
- },
- "Row": {
- "ariaLabel": "row {0} of {1} column {2}"
- }
- },
- "InventoryCatalog": {
- "subtitle": "Start from scratch and select the properties you want from the library of available inventory properties"
- },
- "SettingsCatalog": {
- "subtitle": "Start from scratch and select settings you want from the library of available settings",
- "title": "Settings catalog"
- },
- "Templates": {
- "subtitle": "Templates contain groups of settings, organized by functionality. Use a template when you don't want to build policies manually or want to configure devices to access corporate networks, such as configuring WiFi or VPN.",
- "title": "Templates"
- },
- "noData": "No policy templates found"
- },
- "OfficeApplicationAdditionalType": {
- "projectProRetail": "Project Online Desktop Client",
- "visioProRetail": "Visio Online Plan 2"
- },
- "Countries": {
- "ae": "United Arab Emirates",
- "ag": "Antigua and Barbuda",
- "ai": "Anguilla",
- "al": "Albania",
- "am": "Armenia",
- "ao": "Angola",
- "ar": "Argentina",
- "at": "Austria",
- "au": "Australia",
- "az": "Azerbaijan",
- "bb": "Barbados",
- "be": "Belgium",
- "bf": "Burkina Faso",
- "bg": "Bulgaria",
- "bh": "Bahrain",
- "bj": "Benin",
- "bm": "Bermuda",
- "bn": "Brunei",
- "bo": "Bolivia",
- "br": "Brazil",
- "bs": "Bahamas",
- "bt": "Bhutan",
- "bw": "Botswana",
- "by": "Belarus",
- "bz": "Belize",
- "ca": "Canada",
- "cg": "Republic Of Congo",
- "ch": "Switzerland",
- "cl": "Chile",
- "cn": "China",
- "co": "Colombia",
- "cr": "Costa Rica",
- "cv": "Cape Verde",
- "cy": "Cyprus",
- "cz": "Czech Republic",
- "de": "Germany",
- "dk": "Denmark",
- "dm": "Dominica",
- "do": "Dominican Republic",
- "dz": "Algeria",
- "ec": "Ecuador",
- "ee": "Estonia",
- "eg": "Egypt",
- "es": "Spain",
- "fi": "Finland",
- "fj": "Fiji",
- "fm": "Federated States Of Micronesia",
- "fr": "France",
- "gb": "United Kingdom",
- "gd": "Grenada",
- "gh": "Ghana",
- "gm": "Gambia",
- "gr": "Greece",
- "gt": "Guatemala",
- "gw": "Guinea-Bissau",
- "gy": "Guyana",
- "hk": "Hong Kong",
- "hn": "Honduras",
- "hr": "Croatia",
- "hu": "Hungary",
- "id": "Indonesia",
- "ie": "Ireland",
- "il": "Israel",
- "in": "India",
- "is": "Iceland",
- "it": "Italy",
- "jm": "Jamaica",
- "jo": "Jordan",
- "jp": "Japan",
- "ke": "Kenya",
- "kg": "Kyrgyzstan",
- "kh": "Cambodia",
- "kn": "St. Kitts and Nevis",
- "kr": "Republic Of Korea",
- "kw": "Kuwait",
- "ky": "Cayman Islands",
- "kz": "Kazakstan",
- "la": "Lao People’s Democratic Republic",
- "lb": "Lebanon",
- "lc": "St. Lucia",
- "lk": "Sri Lanka",
- "lr": "Liberia",
- "lt": "Lithuania",
- "lu": "Luxembourg",
- "lv": "Latvia",
- "md": "Republic Of Moldova",
- "mg": "Madagascar",
- "mk": "North Macedonia",
- "ml": "Mali",
- "mn": "Mongolia",
- "mo": "Macau",
- "mr": "Mauritania",
- "ms": "Montserrat",
- "mt": "Malta",
- "mu": "Mauritius",
- "mw": "Malawi",
- "mx": "Mexico",
- "my": "Malaysia",
- "mz": "Mozambique",
- "na": "Namibia",
- "ne": "Niger",
- "ng": "Nigeria",
- "ni": "Nicaragua",
- "nl": "Netherlands",
- "no": "Norway",
- "np": "Nepal",
- "nz": "New Zealand",
- "om": "Oman",
- "pa": "Panama",
- "pe": "Peru",
- "pg": "Papua New Guinea",
- "ph": "Philippines",
- "pk": "Pakistan",
- "pl": "Poland",
- "pt": "Portugal",
- "pw": "Palau",
- "py": "Paraguay",
- "qa": "Qatar",
- "ro": "Romania",
- "ru": "Russia",
- "sa": "Saudi Arabia",
- "sb": "Solomon Islands",
- "sc": "Seychelles",
- "se": "Sweden",
- "sg": "Singapore",
- "si": "Slovenia",
- "sk": "Slovakia",
- "sl": "Sierra Leone",
- "sn": "Senegal",
- "sr": "Suriname",
- "st": "Sao Tome and Principe",
- "sv": "El Salvador",
- "sz": "Swaziland",
- "tc": "Turks and Caicos",
- "td": "Chad",
- "th": "Thailand",
- "tj": "Tajikistan",
- "tm": "Turkmenistan",
- "tn": "Tunisia",
- "tr": "Turkey",
- "tt": "Trinidad and Tobago",
- "tw": "Taiwan",
- "tz": "Tanzania",
- "ua": "Ukraine",
- "ug": "Uganda",
- "us": "United States",
- "uy": "Uruguay",
- "uz": "Uzbekistan",
- "vc": "St. Vincent and The Grenadines",
- "ve": "Venezuela",
- "vg": "British Virgin Islands",
- "vn": "Vietnam",
- "ye": "Yemen",
- "za": "South Africa",
- "zw": "Zimbabwe"
- },
- "OfficeUpdateChannel": {
- "current": "Current Channel",
- "deferred": "Semi-Annual Enterprise Channel",
- "firstReleaseCurrent": "Current Channel (Preview)",
- "firstReleaseDeferred": "Semi-Annual Enterprise Channel (Preview)",
- "monthlyEnterprise": "Monthly Enterprise Channel",
- "placeHolder": "Select one"
- },
- "AppProtection": {
- "allAppTypes": "Target to all app types",
- "androidPlatformLabel": "Android",
- "appsInAndroidWorkProfile": "Apps in Android Work Profile",
- "appsOnAndroidEnterpriseDedicatedDevicesWithAzureAdSharedMode": "Apps On Android Enterprise Dedicated Devices With Microsoft Entra Shared Mode",
- "appsOnAndroidOpenSourceProjectUserAssociated": "Apps On Android Open Source Project User Associated",
- "appsOnAndroidOpenSourceProjectUserless": "Apps On Android Open Source Project Userless",
- "appsOnIntuneManagedDevices": "Apps on Intune managed devices",
- "appsOnUnmanagedDevices": "Apps on unmanaged devices",
- "iOSPlatformLabel": "iOS/iPadOS",
- "iosAndroidMacPlatformLabel": "iOS, Android, Mac",
- "iosAndroidPlatformLabel": "iOS, Android",
- "macPlatformLabel": "Mac",
- "notAvailable": "Not Available",
- "windows10PlatformLabel": "Windows 10 and later",
- "withEnrollment": "With enrollment",
- "withoutEnrollment": "Without enrollment"
- },
- "DisplayRoleTypes": {
- "builtInRole": "Built-in Role",
- "customCloudPCRole": "Custom Windows 365 role",
- "customIntuneRole": "Custom Intune role",
- "customRole": "Custom Role"
- },
- "EnrollmentRestrictions": {
- "DeletePayloadLink": {
- "content": "{0} is included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "contentWithError": "{0} might be included in one or more policy sets. If you delete {0}, you'll no longer be able to assign it via these policy sets. Delete anyway?",
- "header": "Are you sure you want to delete this restriction?"
- },
- "DeviceLimit": {
- "description": "Specify the maximum number of devices a user can enroll.",
- "header": "Device limit restrictions",
- "info": "Define how many devices each user can enroll."
- },
- "DeviceType": {
- "VersionValidation": {
- "aOSP": "Must be 1.0 or greater.",
- "android": "Enter a valid version number. Examples: 5.0, 5.5.1, 6.0.0.1",
- "androidForWork": "Enter a valid version number. Examples: 5.0, 5.1.1",
- "iOS": "Enter a valid version number. Examples: 9.0, 10.0, 9.0.2",
- "mac": "Enter a valid version number. Examples: 10, 10.10, 10.10.1",
- "min": "Minimum cannot be lower than {0}",
- "minMax": "Minimum version cannot be greater than maximum version.",
- "windows": "Must be 10.0 or greater. Leave blank to allow 8.1 devices",
- "windowsMobile": "Must be 10.0 or greater. Leave blank to allow 8.1 devices"
- },
- "allPlatformsBlocked": "All device platforms are blocked. Allow platform enrollment to enable platform configuration.",
- "blockManufacturerPlaceHolder": "Manufacturer name",
- "blockManufacturersHeader": "Blocked manufacturers",
- "cannotRestrict": "Restriction not supported",
- "configurationDescription": "Specify the platform configuration restrictions that must be met for a device to enroll. Use compliance policies to restrict devices after enrollment. Define versions as major.minor.build. Version restrictions only apply to devices enrolled with the Company Portal. Intune classifies devices as personally-owned by default. Additional action is required to classify devices as corporate-owned.",
- "configurationDescriptionLabel": "Learn more about setting enrollment restrictions",
- "configurations": "Configure platforms",
- "deviceManufacturer": "Device manufacturer",
- "header": "Device type restrictions",
- "info": "Define which platforms, versions, and management types can enroll.",
- "manufacturer": "Manufacturer",
- "max": "Max",
- "maxVersion": "Maximum version",
- "min": "Min",
- "minVersion": "Minimum version",
- "newPlatforms": "You have allowed new platforms. Consider updating Platform Configurations.",
- "personal": "Personally owned",
- "platform": "Platform",
- "platformDescription": "You can allow enrollment of the following platforms. Only block platforms you will not support. Allowed platforms can be configured with additional enrollment restrictions.",
- "platformSettings": "Platform settings",
- "platforms": "Select platforms",
- "platformsSelected": "{0} platforms selected",
- "type": "Type",
- "versions": "versions",
- "versionsRange": "Allow min/max range:",
- "windowsTooltip": "Restricts enrollment through Mobile Device Management. Does not restrict PC agent installation. Only Windows 10 and Windows 11 versions are supported. Leave versions blank to allow Windows 8.1."
- },
- "Priority": {
- "saved": "Restriction Priorities were successfully saved."
- },
- "Row": {
- "announce": "Priority: {0}, Name: {1}, Assigned: {2}"
- },
- "Table": {
- "deployed": "Deployed",
- "name": "Name",
- "priority": "Priority"
- },
- "Type": {
- "limit": "Device limit restriction",
- "type": "Device type restriction"
- },
- "allUsers": "All Users",
- "androidRestrictions": "Android restrictions",
- "create": "Create restriction",
- "defaultLimitDescription": "This is the default Device Limit Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultTypeDescription": "This is the default Device Type Restriction applied with lowest priority to all users regardless of group membership.",
- "defaultWhfbDescription": "This is the default Windows Hello for Business configuration applied with the lowest priority to all users regardless of group membership.",
- "deleteMessage": "Affected users will be restricted by the next highest priority restriction assigned or the default restriction if no other restriction is assigned.",
- "deleteTitle": "Are you sure you want to delete {0} restriction?",
- "descriptionHint": "Short paragraph describing the business use or restriction level characterized by the restriction's settings.",
- "edit": "Edit restriction",
- "info": "A device must comply with the highest priority enrollment restrictions assigned to its user. You can drag a device restriction to change its priority. Default restrictions are lowest priority for all users and govern userless enrollments. Default restrictions may be edited, but not deleted.",
- "iosRestrictions": "iOS restrictions",
- "mDM": "MDM",
- "macRestrictions": "macOS restrictions",
- "maxVersion": "Max Version",
- "minVersion": "Min Version",
- "nameHint": "This will be the primary attribute visible for identifying the restriction set.",
- "noAssignmentsStatusBar": "Assign restriction to at least one group. Click Properties.",
- "nonAdminForbiddenCreateError": "You must be an Intune Service or Global Administrator to create, edit or delete restrictions.",
- "nonAdminForbiddenEdit": "You must be an admin to edit restrictions.",
- "notFound": "Restriction not found. It may have already been deleted.",
- "personallyOwned": "Personally owned devices",
- "restriction": "Restriction",
- "restrictionLowerCase": "restriction",
- "restrictionType": "Restriction type",
- "selectType": "Select restriction type",
- "selectValidation": "Please select a platform",
- "typeHint": "Choose Device Type Restriction to restrict device properties. Choose Device Limit Restriction to restrict number of devices per-user.",
- "typeRequired": "Restriction type is required.",
- "winPhoneRestrictions": "Windows Phone restrictions",
- "windowsECv1Info": "Older enrollment restrictions can’t be edited or reprioritized, only deleted.",
- "windowsECv2Info": "You can prioritize enrollment restrictions by dragging and dropping them. View default and preconfigured restrictions below. All new enrollment restrictions will have a higher priority than default and preconfigured restrictions.",
- "windowsRestrictions": "Windows restrictions",
- "windowsRestrictionsPreview": "Filter-based Windows restrictions (preview)"
- },
- "InstallContextType": {
- "device": "Device",
- "deviceContext": "Device context",
- "user": "User",
- "userContext": "User context"
- },
- "ProactiveRemediations": {
- "Create": {
- "Basics": {
- "DescriptionMultiLineTextBox": {
- "label": "Description",
- "placeholder": "Enter a description"
- },
- "NameTextBox": {
- "label": "Name",
- "placeholder": "Enter a name"
- },
- "PublisherTextBox": {
- "label": "Publisher",
- "placeholder": "Enter a publisher"
- },
- "VersionTextBox": {
- "label": "Version"
- },
- "headerDescription": "Create a new custom script package from detection and remediation scripts that you’ve written."
- },
- "ScopeTags": {
- "headerDescription": "Select one or more groups to assign the script package."
- },
- "Settings": {
- "DetectionScriptMultiLineTextBox": {
- "label": "Detection script",
- "placeholder": "Input script text",
- "requiredValidationMessage": "Please enter the detection script"
- },
- "EnforceScriptSignatureCheckOptionPicker": {
- "label": "Enforce script signature check"
- },
- "LoggedOnCredentialsOptionPicker": {
- "label": "Run this script using the logged-on credentials"
- },
- "RemediationScript": {
- "infoBox": "This script will run in detect-only mode because there is no remediation script."
- },
- "RemediationScriptMultiLineTextBox": {
- "label": "Remediation script",
- "placeholder": "Input script text"
- },
- "RunIn64BitPSOptionPicker": {
- "label": "Run script in 64-bit PowerShell"
- },
- "ScriptMultiLineTextBox": {
- "base64EncodingValidationMessage": "Invalid script. One or more characters used in the script is not valid."
- },
- "headerDescription": "Create a custom script package from scripts you've written. By default, scripts will run on assigned devices every day.",
- "infoBox": "This script is read-only. Some of the settings for this script might be disabled."
- },
- "title": "Create custom script",
- "ScriptProperties": {
- "GridHeaders": {
- "interval": "Interval",
- "time": "Date and time"
- },
- "Interval": {
- "day": "Repeats every day",
- "days": "Repeats every {0} days",
- "hour": "Repeats every hour",
- "hours": "Repeats every {0} hours",
- "month": "Repeats every month",
- "months": "Repeats every {0} months",
- "week": "Repeats every week",
- "weeks": "Repeats every {0} weeks"
- },
- "Time": {
- "utc": "{0} (UTC)",
- "utcWithDate": "{0} (UTC) on {1}",
- "withDate": "{0} on {1}"
- }
- }
- },
- "Edit": {
- "title": "Edit - {0}"
- }
- },
- "EdgeAppConfig": {
- "AllowedURLs": {
- "title": "Allowed URLs",
- "tooltip": "Specify the sites your users are allowed to access while in their work context. No other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "ApplicationProxyRedirection": {
- "header": "Application proxy",
- "title": "Application proxy redirection",
- "tooltip": "Enable App proxy redirection to give users access to corporate links and on-premise web apps."
- },
- "BlockedURLs": {
- "title": "Blocked URLs",
- "tooltip": "Specify the sites that are blocked for your users while in their work context. All other sites will be allowed. You may choose to configure either an allowed/blocked list, but not both. "
- },
- "Bookmarks": {
- "header": "Managed bookmarks",
- "tooltip": "Enter a list of bookmarked URLs for your users to have available when using Microsoft Edge in their work context.",
- "uRL": "URL"
- },
- "HomepageURL": {
- "header": "Managed homepage",
- "title": "Homepage shortcut URL",
- "tooltip": "Configure a homepage shortcut that will appear to users as the first icon beneath the search bar when they open a new tab in Microsoft Edge."
- },
- "PersonalContext": {
- "label": "Redirect restricted sites to personal context",
- "tooltip": "Configure if users should be allowed to transition to their personal context to open restricted sites."
- }
- },
- "BooleanActions": {
- "allow": "Allow",
- "block": "Block",
- "configured": "Configured",
- "disable": "Disable",
- "dontRequire": "Don't Require",
- "enable": "Enable",
- "hide": "Hide",
- "limit": "Limit",
- "notConfigured": "Not configured",
- "require": "Require",
- "show": "Show",
- "yes": "Yes"
- },
- "OptionalFeatureUpdateOptions": {
- "optional": "Make available to users as an optional update",
- "optionalValue": "Optional",
- "required": "Make available to users as a required update",
- "requiredValue": "Required"
- },
- "WindowsQualityUpdateDaysUntilForcedReboot": {
- "oneDay": "1 day",
- "twoDays": "2 days",
- "zeroDays": "0 days"
- },
- "SoftwareUpdates": {
- "BladeTitles": {
- "overview": "Overview"
- },
- "EndUserUpdate": {
- "searchByDeviceUserAndQualityUpdateVersion": "Search by Device, User or Quality Update Version."
- },
- "Ios": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load iOS software update profiles"
- }
- },
- "SummaryBlade": {
- "subtitle": "iOS update profile",
- "title": "iOS/iPadOS"
- },
- "WizardBlade": {
- "subtitle": "iOS/iPadOS",
- "title": "profile"
- },
- "listLoadError": "Unable to load iOS software update profiles, try again later",
- "lowercase": "iOS update policy",
- "uppercase": "iOS Update policy"
- },
- "IosUpdatePolicy": {
- "Settings": {
- "IOSVersion": {
- "apiFailText": "We're sorry, we're unable to connect with Apple to get the list of available versions. Please try again later or continue with the latest version.",
- "latestUpdate": "Latest update",
- "noLongerSupported": "Selected version is no longer supported",
- "olderVersionSelected": "Since you selected an earlier version, make sure you apply a device restriction policy that defers the visibilty of software updates so that devices can't update to the latest version.",
- "prefix": "Install iOS/iPadOS",
- "selectSupported": "Select update version supported by Apple",
- "updateToInstall": "Update to install"
- },
- "Schedule": {
- "always": "Update at next check-in",
- "duringTimeWindows": "Update during scheduled time",
- "header": "By default, when an update policy is assigned to a device, Intune deploys the latest updates at device check-in. You can instead create a weekly schedule with customized start and end times. If you choose to update outside of the scheduled time, Intune won't deploy updates until the scheduled time ends.",
- "infoBalloon": "When the updates will occur. Additional input is required to schedule updates during or outside of scheduled times.",
- "label": "Schedule type",
- "outsideActiveHours": "Update outside of active hours (legacy)",
- "outsideTimeWindows": "Update outside of scheduled time",
- "timeWindow": "Time window",
- "timeZone": "Time zone",
- "title": "Update policy schedule settings:",
- "weekly": "Weekly schedule",
- "timeWindowToolTip": null,
- "timeZoneToolTip": null
- },
- "VersionsDropdown": {
- "infoBalloon": "The version of iOS/iPadOS to install on devices at time of update.",
- "label": "Select version to install"
- },
- "header": "Create a profile to force assigned devices to automatically install the latest iOS/iPadOS updates. These settings determine how and when software updates deploy. This profile doesn't prevent users from updating the OS manually, which can be prevented for up to 90 days with a device configuration restriction policy. Updates will only apply to supervised devices.",
- "notAvailable": "N/A"
- }
- },
- "ListPartEmpty": {
- "iosUpdates": "There are no iOS update policies to display",
- "macOsUpdates": "There are no macOS software update policies to display",
- "windowsUpdates": "There are no update rings for Windows 10 and later to show."
- },
- "MacOSSoftwareUpdate": {
- "AccountSummary": {
- "Columns": {
- "deviceName": "Device name",
- "deviceUpdateStatus": "Device update status",
- "lastUpdated": "Last updated",
- "osVersion": "OS version",
- "userPrincipalName": "User name"
- },
- "maximumOSVersionFilter": "Maximum OS version",
- "minimumOSVersionFilter": "Minimum OS version",
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by device name, user name or OS version",
- "title": "Account summary for macOS devices"
- },
- "Category": {
- "configurationDataFile": "Configuration data file",
- "critical": "Critical",
- "firmware": "Firmware",
- "other": "Other"
- },
- "CategorySummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "successfulUpdateCount": "Successful updates deployed",
- "totalUpdateCount": "Total updates deployed",
- "updateCategory": "Update category",
- "updateCategoryStatus": "Update category status"
- },
- "noData": "No data to display"
- },
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load macOS software update profiles"
- }
- },
- "State": {
- "available": "Available",
- "commandFailed": "Command failed",
- "downloadFailed": "Download failed",
- "downloadInsufficientNetwork": "Download insufficient network",
- "downloadInsufficientPower": "Download insufficient power",
- "downloadInsufficientSpace": "Download insufficient space",
- "downloaded": "Downloaded",
- "downloading": "Downloading",
- "idle": "Idle",
- "installFailed": "Install failed",
- "installInsufficientPower": "Install insufficient power",
- "installInsufficientSpace": "Install insufficient space",
- "installing": "Installing",
- "scheduled": "Scheduled",
- "success": "Success",
- "unknown": "Unknown"
- },
- "StateSummary": {
- "Columns": {
- "lastUpdated": "Last Updated",
- "updateName": "Update name",
- "updateStatus": "Update status",
- "version": "Version"
- },
- "noData": "No data to display",
- "searchBoxPlaceholder": "Search by update name or version"
- },
- "SummaryBlade": {
- "subtitle": "macOS update profile",
- "title": "macOS"
- },
- "WizardBlade": {
- "subtitle": "macOS",
- "title": "Profile"
- },
- "error": "Error",
- "errorOrErrors": "Error(s)",
- "errors": "Errors",
- "listLoadError": "Unable to load macOS software update profiles, try again later",
- "lowercase": "macOs update policy",
- "other": "Other",
- "subtitle": "MacOS software update",
- "upToDate": "Up to date",
- "uppercase": "macOS Update Policy"
- },
- "Notifications": {
- "DeleteFailed": {
- "description": "Please try again later",
- "title": "Failed to delete {0}"
- },
- "LoadAllConfigurationFailed": {
- "description": "Please try again later"
- },
- "LoadConfigurationFailed": {
- "description": "Please try again later",
- "title": "Failed to load {0}"
- },
- "idWrongFormat": "The provided id for the profile is not in the expected format."
- },
- "UpdatePolicy": {
- "Settings": {
- "Schedule": {
- "noneSelected": "At least one time window should be selected",
- "tooMany": "A maximum of 20 time windows can be configured"
- }
- },
- "endDay": "End day",
- "endTime": "End time",
- "startDay": "Start day",
- "startTime": "Start time",
- "timeWindowError": "Choose a window of time that spans at least one hour."
- },
- "WindowsUpdateForBusiness": {
- "Notifications": {
- "LoadAllConfigurationFailed": {
- "title": "Failed to load update ring profiles for Windows 10 and later."
- }
- },
- "SummaryBlade": {
- "subtitle": "Update ring for Windows 10 and later",
- "title": "Windows Update for Business"
- },
- "WizardBlade": {
- "subtitle": "Windows 10 and later",
- "title": "Update ring for Windows 10 and later"
- },
- "listLoadError": "Unable to load update rings profiles for Windows 10 and later, try again later",
- "lowercase": "Update ring",
- "uppercase": "Update Ring"
- },
- "Wizard": {
- "Tabs": {
- "updatePolicySettings": "Update policy settings",
- "updateRingSettings": "Update ring settings"
- }
- },
- "WizardBlade": {
- "Verb": {
- "create": "Create {0}",
- "edit": "Edit {0}"
- }
- },
- "notScannedYet": "Not scanned yet",
- "outOfDateIosDevices": "Out of date iOS devices"
- },
"ConfigurationTypes": {
"Table": {
"androidDeviceOwnerGeneral": "Device restrictions (device owner)",
@@ -12503,6 +13183,109 @@
"windowsPhoneVPN": "VPN",
"IosUpdate": "iOS Update policy"
},
+ "DetectionRules": {
+ "ComparisonOperators": {
+ "equals": "Equals",
+ "greaterThan": "Greater than",
+ "greaterThanOrEqualTo": "Greater than or equal to",
+ "lessThan": "Less than",
+ "lessThanOrEqualTo": "Less than or equal to",
+ "notEqualTo": "Not equal to"
+ },
+ "CustomScript": {
+ "enforceSignatureCheck": "Enforce script signature check and run script silently",
+ "enforceSignatureCheckTooltip": "Select 'Yes' to verify that the script is signed by a trusted publisher, which will allow the script to run with no warnings or prompts displayed. The script will run unblocked. Select 'No' (default) to run the script with end-user confirmation without signature verification.",
+ "header": "Use a custom detection script",
+ "runAs32Bit": "Run script as 32-bit process on 64-bit clients",
+ "runAs32BitTooltip": "Select 'Yes' to run the script in a 32-bit process on 64-bit clients. Select 'No' (default) to run the script in a 64-bit process on 64-bit clients. 32-bit clients run the script in a 32-bit process.",
+ "scriptContent": "Script content",
+ "scriptFile": "Script file",
+ "scriptFileNotSelectedValidation": "No script file is selected.",
+ "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. The app will be detected when the script both returns a 0 value exit code and writes a string value to STDOUT.",
+ "scriptSizeLimitValidation": "Your detection script exceeds the maximum size allowed. Resolve this by reducing the size of your detection script."
+ },
+ "Manual": {
+ "FileRule": {
+ "DetectionMethodOptions": {
+ "dateCreated": "Date created",
+ "dateModified": "Date modified",
+ "doesNotExist": "File or folder does not exist",
+ "fileOrFolderExists": "File or folder exists",
+ "sizeInMB": "Size in MB",
+ "version": "String (version)"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to expand any path environment variables in the 32-bit context on 64-bit clients. Select 'No' (default) to expand any path variables in the 64-bit context on 64-bit clients. 32-bit clients will always use the 32-bit context.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "fileOrFolder": "File or folder",
+ "fileOrFolderToolTip": "The file or folder to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "path": "Path",
+ "pathTooltip": "The full path of the folder containing the file or folder to detect.",
+ "value": "Value",
+ "valueTooltip": "Select a value that matches the selected detection method. Date detection methods should be entered in local time."
+ },
+ "GridColumns": {
+ "pathOrCode": "Path/Code",
+ "type": "Type"
+ },
+ "MsiRule": {
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the MSI product version validation comparison.",
+ "productCode": "MSI product code",
+ "productCodeTooltip": "A valid MSI product code for the app.",
+ "productVersion": "Value",
+ "productVersionCheck": "MSI product version check",
+ "productVersionCheckTooltip": "Select 'Yes' to verify the MSI product version in addition to the MSI product code.",
+ "productVersionTooltip": "Enter the MSI product version for the app."
+ },
+ "RegistryRule": {
+ "DetectionMethodOptions": {
+ "integerComparison": "Integer comparison",
+ "keyDoesNotExist": "Key does not exist",
+ "keyExists": "Key exists",
+ "stringComparison": "String comparison",
+ "valueDoesNotExist": "Value does not exist",
+ "valueExists": "Value exists",
+ "versionComparison": "Version comparison"
+ },
+ "associatedWith32Bit": "Associated with a 32-bit app on 64-bit clients",
+ "associatedWith32BitTooltip": "Select 'Yes' to search the 32-bit registry on 64-bit clients. Select 'No' (default) search the 64-bit registry on 64-bit clients. 32-bit clients will always search the 32-bit registry.",
+ "detectionMethod": "Detection method",
+ "detectionMethodTooltip": "Select the type of detection method used to validate the presence of the app.",
+ "keyPath": "Key path",
+ "keyPathTooltip": "The full path of the registry entry containing the value to detect.",
+ "operator": "Operator",
+ "operatorTooltip": "Select the operator for the detection method used to validate the comparison.",
+ "value": "Value",
+ "valueName": "Value name",
+ "valueNameTooltip": "The name of the registry value to detect.",
+ "valueTooltip": "Select a value that matches the selected detection method."
+ },
+ "RuleTypeOptions": {
+ "file": "File",
+ "mSI": "MSI",
+ "registry": "Registry"
+ },
+ "gridAriaLabel": "Detection Rules",
+ "header": "Create a rule that indicates the presence of the app.",
+ "noRulesSelectedPlaceholder": "No rules are specified.",
+ "ruleTableLimit": "You can add up to 25 detection rules",
+ "ruleType": "Rule type",
+ "ruleTypeTooltip": "Choose the type of detection rule to add."
+ },
+ "RuleConfigurationOptions": {
+ "customScript": "Use a custom detection script",
+ "manual": "Manually configure detection rules"
+ },
+ "bladeTitle": "Detection rules",
+ "header": "Configure app specific rules used to detect the presence of the app.",
+ "rulesFormat": "Rules format",
+ "rulesFormatTooltip": "Choose to either manually configure the detection rules or use a custom script to detect the presence of the app.",
+ "selectorLabel": "Detection rules"
+ },
"OfficeSuiteAppsTab": {
"acceptLicenseOnBehalfOfUsersLabel": "Accept the Microsoft Software License Terms on behalf of users",
"appSuiteConfigurationLabel": "App suite configuration",
@@ -12545,850 +13328,119 @@
"xLanguagesSelectedLabel": "{0} language(s) selected",
"xmlConfigurationLabel": "XML Configuration"
},
- "Filters": {
- "ruleSyntax": "Rule syntax",
- "filters": "Filters"
- },
- "OutlookAppConfigSettings": {
- "AllowUserToChangeSetting": {
- "title": "Allow user to change setting",
- "tooltip": "Specify if the user is allowed to change the setting."
- },
- "AllowWorkAccounts": {
- "title": "Allow only work or school accounts",
- "tooltip": " By enabling this setting, users will be unable to add personal email and storage accounts within Outlook. If the user has a personal account added to Outlook, the user is prompted to remove the personal account. If the user does not remove the personal account, the work or school account cannot be added."
- },
- "BlockExternalImages": {
- "title": "Block external images",
- "tooltip": "When block external images is enabled, the app will prevent the download of images hosted on the Internet that are embedded in the message body. When set as not configured, the default app setting is set to Off"
- },
- "ConfigureEmail": {
- "title": "Configure email account settings"
- },
- "DefaultAppSignatureSetting": {
- "Tooltip": {
- "android": "Default app signature indicates whether the app will use “Get Outlook for Android” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On.",
- "iOS": "Default app signature indicates whether the app will use “Get Outlook for iOS” as the default signature during message composition. If the setting is configured as Off, the default signature will not be used; however, users can add their own signature.\n\nWhen set as Not Configured, the default app setting is set to On."
- },
- "title": "Default app signature"
- },
- "OfficeFeedReplies": {
- "title": "Discover Feed",
- "tooltip": "Discover Feed surfaces your most frequently accessed Office files. By default, this feed is enabled when Delve is enabled for the user. When set as not configured, the default app setting is set to On."
- },
- "OrganizeMailByThread": {
- "title": "Organize mail by thread",
- "tooltip": "The default behavior in Outlook is to bundle mail conversations into a threaded conversation view. If this setting is disabled Outlook will display each mail individually and will not group them by thread."
- },
- "PlayMyEmails": {
- "title": "Play My Emails",
- "tooltip": "The Play My Emails feature is not enabled by default in the app, but it is promoted to eligible users via a banner in the inbox. When set to Off, this feature will not be promoted to eligible users in the app. Users can choose to manually enable Play My Emails from within the app, even when this feature is set to Off. When set as Not configured, the default app setting is On and the feature will be promoted to eligible users."
- },
- "SuggestedReplies": {
- "title": "Suggested replies",
- "tooltip": "When you open a message, Outlook might suggest replies below the message. If you select a suggested reply, you can edit the reply before sending it."
- },
- "SyncCalendars": {
- "title": "Sync Calendars",
- "tooltip": "Configure whether users can sync their Outlook calendar to the native calendar app and database."
- },
- "TextPredictions": {
- "title": "Text Predictions",
- "tooltip": "Outlook can suggest words and phrases as you compose messages. When Outlook offers a suggestion, swipe to accept it. When set as not configured, the default app setting is set to On."
- },
- "ThemesEnabled": {
- "title": "Themes enabled",
- "tooltip": "Specify if the user is allowed to use a custom visual theme."
- }
- },
- "Titles": {
- "ChromeOs": {
- "devices": "ChromeOS devices"
- },
- "ManagedDesktop": {
- "adminContacts": "Admin contacts",
- "appPackaging": "App packaging",
- "autopatchGroups": "Autopatch groups",
- "devices": "Devices",
- "featureEnablement": "Feature activate",
- "feedback": "Feedback",
- "gettingStarted": "Getting started",
- "messages": "Messages",
- "onlineResources": "Online resources",
- "policyHealth": "Policy health",
- "policyHealthPreview": "Policy health (preview)",
- "releaseManagement": "Release management",
- "serviceRequests": "Service requests",
- "settings": "Settings",
- "supportRequests": "Support requests",
- "tenantEnrollment": "Tenant enrollment",
- "tenantManagement": "Tenant management"
- },
- "actions": "Actions for Non-Compliance",
- "advancedExchangeSettings": "Exchange online settings",
- "advancedThreatProtection": "Microsoft Defender for Endpoint",
- "allApps": "All apps",
- "allDevices": "All devices",
- "androidFotaDeployments": "Android FOTA deployments",
- "appBundles": "App Bundles",
- "appCategories": "App categories",
- "appConfigPolicies": "App configuration policies",
- "appConfigurationStatus": "App Configuration Status",
- "appInstallStatus": "App install status",
- "appLicences": "App licenses",
- "appProtectionPolicies": "App protection policies",
- "appProtectionStatus": "App Protection status",
- "appSelectiveWipe": "App selective wipe",
- "appleVppTokens": "Apple VPP Tokens",
- "apps": "Apps",
- "assign": "Assignments",
- "assignedPermissions": "Assigned permissions",
- "assignedRoles": "Assigned roles",
- "autopilotDeploymentReport": "Autopilot deployments (preview)",
- "autopilotDeploymentReportV2": "Autopilot deployments 2.0 (preview)",
- "brandingAndCustomization": "Customization",
- "cartProfiles": "Cart profiles",
- "certificateConnectors": "Certificate connectors",
- "chromeEnterprise": "Chrome Enterprise",
- "cloudAttachedDevices": "Cloud attached devices (preview)",
- "cloudPcActions": "Cloud PC actions (preview)",
- "cloudPcMaintenanceWindows": "Cloud PC maintenance windows (Preview)",
- "compliancePolicies": "Compliance policies",
- "complianceScriptManagement": "Scripts",
- "complianceScriptManagementPreview": "Scripts (preview)",
- "complianceSettings": "Compliance policy settings",
- "conditionStatements": "Condition statements",
- "conditions": "Locations",
- "configMgr": "Microsoft Endpoint Configuration Manager",
- "configurationProfiles": "Configuration profiles",
- "configurationScripts": "Configuration Scripts",
- "connectorsAndTokens": "Connectors and tokens",
- "corporateDeviceIdentifiers": "Corporate device identifiers",
- "customAttributes": "Custom attributes",
- "customNotifications": "Custom notifications",
- "deploymentSettings": "Deployment settings",
- "derivedCredentials": "Derived Credentials",
- "deviceActions": "Device actions",
- "deviceCategories": "Device categories",
- "deviceCleanUp": "Device clean-up rules",
- "deviceEnrollmentManagers": "Device enrollment managers",
- "deviceExecutionStatus": "Device status",
- "deviceLimitEnrollmentRestrictions": "Enrollment device limit restrictions",
- "deviceTypeEnrollmentRestrictions": "Enrollment device platform restrictions",
- "devices": "Devices",
- "discoveredApps": "Discovered apps",
- "edgePolicies": "Policies for Microsoft Edge",
- "embeddedSIM": "eSIM cellular profiles (preview)",
- "enrollDevices": "Enroll devices",
- "enrollmentFailures": "Enrollment failures",
- "enrollmentNotifications": "Enrollment notifications (preview)",
- "enrollmentRestrictions": "Enrollment restrictions",
- "exchangeActiveSync": "Exchange ActiveSync",
- "exchangeServiceConnectors": "Exchange service connectors",
- "failuresForCumulativeQualityUpdates": "Windows Cumulative Quality update failures",
- "failuresForDriverUpdates": "Windows Driver update failures",
- "failuresForFeatureUpdates": "Feature update failures",
- "failuresForQualityUpdates": "Windows Expedited update failures",
- "featureFlighting": "Feature flighting",
- "featureUpdateDeployments": "Feature updates for Windows 10 and later",
- "flighting": "Flighting",
- "fotaUpdate": "Firmware over-the-air update",
- "groupPolicy": "Administrative Templates",
- "groupPolicyAnalytics": "Group policy analytics",
- "helpSupport": "Help and support",
- "helpSupportReplacement": "Help and support ({0})",
- "iOSAppProvisioning": "iOS app provisioning profiles",
- "incompleteUserEnrollments": "Incomplete user enrollments",
- "iosUpdates": "Update policies for iOS/iPadOS",
- "legacyPcManagement": "Legacy PC management",
- "macOSSoftwareUpdate": "Update policies for macOS",
- "macOSSoftwareUpdateAccountSummaries": "Installation status for macOS devices",
- "macOSSoftwareUpdateCategorySummaries": "Software updates summary",
- "macOSSoftwareUpdateStateSummaries": "updates",
- "managedGooglePlay": "Managed Google Play",
- "msfb": "Microsoft Store for Business",
- "myPermissions": "My permissions",
- "notifications": "Notifications",
- "officeApps": "Office apps",
- "officeProPlusPolicies": "Policies for Office apps",
- "onPremise": "On Premise",
- "onPremisesConnector": "Exchange ActiveSync on-premises connector",
- "onPremisesDeviceAccess": "Exchange ActiveSync devices",
- "onPremisesManageAccess": "Exchange on-premises access",
- "outOfDateIosDevices": "Installation failures for iOS devices",
- "overview": "Overview",
- "partnerDeviceManagement": "Partner device management",
- "perUpdateRingDeploymentState": "Per update ring deployment state",
- "permissions": "Permissions",
- "platformApps": "{0} apps",
- "platformDevices": "{0} devices",
- "platformEnrollment": "{0} enrollment",
- "policies": "Policies",
- "profiles": "Profiles",
- "properties": "Properties",
- "reports": "Reports",
- "retireNoncompliantDevices": "Retire noncompliant devices",
- "retireNoncompliantDevicesPreview": "Retire noncompliant devices (preview)",
- "role": "Role",
- "scriptManagement": "Scripts",
- "securityBaselines": "Security baselines",
- "serviceToServiceConnector": "Exchange online connector",
- "servicenowConnector": "ServiceNow connector",
- "shellScripts": "Shell scripts",
- "teamViewerConnector": "TeamViewer connector",
- "telecomeExpenseManagement": "Telecom expense management",
- "tenantAdmin": "Tenant admin",
- "tenantAdministration": "Tenant administration",
- "termsAndConditions": "Terms and conditions",
- "titles": "Titles",
- "troubleshoot": "Troubleshoot",
- "troubleshootSupport": "Troubleshooting + support",
- "user": "User",
- "userExecutionStatus": "User status",
- "wdacSupplementalPolicies": "S mode supplemental policies",
- "win32CatalogUpdateApp": "Updates for Enterprise App Management apps",
- "win32CatalogUpdateAppInPreview": "Updates for Windows (Win32) catalog apps (Preview)",
- "windows10DriverUpdate": "Driver updates for Windows 10 and later",
- "windows10QualityUpdate": "Quality updates for Windows 10 and later",
- "windows10UpdateRings": "Update rings for Windows 10 and later",
- "windows10XPolicyFailures": "Windows 10X policy failures",
- "windows365PartnerConnector": "Windows 365 partner connectors",
- "windowsDiagnosticData": "Windows data",
- "windowsEnterpriseCertificate": "Windows enterprise certificate",
- "windowsManagement": "Scripts",
- "windowsSideLoadingKeys": "Windows side loading keys",
- "windowsSymantecCertificate": "Windows DigiCert certificate",
- "windowsThreatReport": "Threat agent status"
- },
- "ScopeTypes": {
- "allDevices": "All Devices",
- "allUsers": "All Users",
- "allUsersAndDevices": "All Users & All Devices",
- "selectedGroups": "Selected Groups"
- },
- "OfficeApplicationType": {
- "access": "Access",
- "bing": "Microsoft Search as default",
- "excel": "Excel",
- "groove": "OneDrive (Groove)",
- "lync": "Skype for Business",
- "oneDrive": "OneDrive Desktop",
- "oneNote": "OneNote",
- "outlook": "Outlook",
- "powerPoint": "PowerPoint",
- "publisher": "Publisher",
- "teams": "Teams",
- "word": "Word"
- },
- "ApplicableDeviceType": {
- "iPad": "iPad",
- "iPhoneAndIPod": "iPhone and iPod"
+ "WindowsFeatureUpdate": {
+ "EndOFSupportStatus": {
+ "notSupported": "Not supported",
+ "supportEnding": "Support ending",
+ "supported": "Supported"
+ }
},
- "Assignment": {
- "AutoUpdateMode": {
- "default": "Default",
- "header": "Update Priority",
- "postponed": "Postponed",
- "priority": "High Priority"
- },
- "AutoUpdateSupersededApps": {
- "label": "Auto-update",
- "sublabel": "If superseded app(s) have been installed by the user from Company Portal, require superseding app to be installed."
- },
- "DeliveryOptimizationPriority": {
- "backgroundNormal": "Background",
- "displayText": "Content download in {0}",
- "foreground": "Foreground",
- "header": "Delivery optimization priority"
- },
- "RestartGracePeriod": {
- "allowSnooze": "Allow user to snooze the restart notification",
- "countdownDialog": "Select when to display the restart countdown dialog box before the restart occurs (minutes)",
- "durationInMinutes": "Device restart grace period (minutes)",
- "snoozeDurationInMinutes": "Select the snooze duration (minutes)"
- },
- "SoftwareInstallationTime": {
- "TimeZone": {
- "label": "Time zone",
- "local": "Device time zone",
- "utc": "UTC"
- },
- "dateAndTimeLabel": "Date and time",
- "deadlineTimeColumnLabel": "Installation deadline",
- "deadlineTimeDatePickerErrorMessage": "Selected date must be after the available date",
- "deadlineTimeLabel": "App installation deadline",
- "defaultTime": "As soon as possible",
- "infoText": "This application will be available as soon as it has been deployed, unless you specify an availability time below. If this is a required application, you may specify the installation deadline.",
- "specificTime": "A specific date and time",
- "startTimeColumnLabel": "Availability",
- "startTimeDatePickerErrorMessage": "Selected date must be before the deadline date",
- "startTimeLabel": "App availability"
- },
- "restartGracePeriodHeader": "Restart grace period",
- "restartGracePeriodLabel": "Device restart grace period",
- "summaryTitle": "End user experience"
- },
- "Win32Requirements": {
- "AdditionalRequirements": {
- "File": {
- "fileOrFolderToolTip": "The file or folder as the selected requirement.",
- "pathToolTip": "The complete path of the file or folder to detect.",
- "property": "Property",
- "valueToolTip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
- },
- "GridColumns": {
- "pathOrScript": "Path/Script",
- "type": "Type"
- },
- "Registry": {
- "keyPath": "Key path",
- "keyPathTooltip": "The full path of the registry entry containing the value as a requirement.",
- "operator": "Operator",
- "operatorTooltip": "Select the operator for the comparison.",
- "registryRequirement": "Registry key requirement",
- "registryRequirementTooltip": "Select the registry key requirement comparison.",
- "valueName": "Value name",
- "valueNameTooltip": "The name of the required registry value."
+ "WindowsDriverUpdateProfile": {
+ "ApprovalMethod": {
+ "automatic": "Automatically approve all recommended driver updates",
+ "manual": "Manually approve and deploy driver updates"
+ },
+ "BulkActions": {
+ "button": "Bulk actions"
+ },
+ "Details": {
+ "ApprovalMethod": {
+ "label": "Approval method:"
},
- "RequirementTypeOptions": {
- "fileType": "File",
- "registry": "Registry",
- "script": "Script"
- },
- "Script": {
- "RequirementMethodOptions": {
- "boolean": "Boolean",
- "dateTime": "Date and Time",
- "float": "Floating Point",
- "integer": "Integer",
- "string": "String",
- "version": "Version"
- },
- "duplicateName": "Script name {0} has already been used. Please enter a different name.",
- "enforceSignatureCheck": "Enforce script signature check",
- "enforceSignatureCheckTooltip": "Select ‘Yes’ to verify that the script is signed by a trusted publisher, which will allow the script to run without warnings or prompts. The script will run unblocked. Select ‘No’ (default) to run the script with end-user confirmation, but without signature verification.",
- "loggedOnCredentials": "Run this script using the logged on credentials",
- "loggedOnCredentialsTooltip": "Run script using the signed in device credentials.",
- "operatorTooltip": "Select the operator for the requirement comparison.",
- "requirementMethod": "Select output data type",
- "requirementMethodTooltip": "Select the data type used when determining a detection match requirement.",
- "scriptContent": "Script content",
- "scriptFile": "Script file",
- "scriptFileTooltip": "Select a PowerShell script that will detect the presence of the app on the client. If the app is detected, the requirement process will provide a 0 value exit code and will write a string value to STDOUT.",
- "scriptName": "Script name",
- "value": "Value",
- "valueTooltip": "Select a requirement value that matches the selected detection method. Date and time requirement should be entered in your local format."
+ "DeploymentDeferralInDays": {
+ "label": "Make updates available after",
+ "units": "(days)",
+ "value": "{0} days"
+ },
+ "DriverAction": {
+ "header": "Select an action below.",
+ "label": "Driver action",
+ "placeholder": "Select an action"
},
- "bladeTitle": "Add a Requirement rule",
- "createRequirementHeader": "Create a requirement.",
- "header": "Configure additional requirement rules",
- "label": "Additional requirement rules",
- "noRequirementsSelectedPlaceholder": "No requirements are specified.",
- "requirementType": "Requirement type",
- "requirementTypeTooltip": "Choose the type of detection method used to determine how a requirement is validated."
- },
- "architectures": "Operating system architecture",
- "architecturesTooltip": "Choose the architectures needed to install the app.",
- "bladeTitle": "Requirements",
- "diskSpace": "Disk space required (MB)",
- "diskSpaceTooltip": "Free disk space needed on the system drive to install the app.",
- "header": "Specify the requirements that devices must meet before the app is installed:",
- "maximumTextFieldValue": "The value must be at most {0}.",
- "minimumCpuSpeed": "Minimum CPU speed required (MHz)",
- "minimumCpuSpeedTooltip": "The minimum CPU speed required to install the app.",
- "minimumLogicalProcessors": "Minimum number of logical processors required",
- "minimumLogicalProcessorsTooltip": "The minimum number of logical processors required to install the app.",
- "minimumOperatingSystem": "Minimum operating system",
- "minimumOperatingSystemTooltip": "Select the minimum operating system needed to install the app.",
- "minumumTextFieldValue": "The value must be at least {0}.",
- "physicalMemory": "Physical memory required (MB)",
- "physicalMemoryTooltip": "Physical memory (RAM) required to install the app.",
- "selectorLabel": "Requirements",
- "validNumber": "Please enter a valid number."
- },
- "PolicySet": {
- "appManagement": "Application management",
- "assignments": "Assignments",
- "basics": "Basics",
- "deviceEnrollment": "Device enrollment",
- "deviceManagement": "Device management",
- "scopeTags": "Scope tags",
- "appConfigurationTitle": "App configuration policies",
- "appProtectionTitle": "App protection policies",
- "appTitle": "Apps",
- "iOSAppProvisioningTitle": "iOS app provisioning profiles",
- "deviceLimitRestrictionTitle": "Device limit restrictions",
- "deviceTypeRestrictionTitle": "Device type restrictions",
- "enrollmentStatusSettingTitle": "Enrollment status pages",
- "windowsAutopilotDeploymentProfileTitle": "Windows autopilot deployment profiles",
- "deviceComplianceTitle": "Device compliance policies",
- "deviceConfigurationTitle": "Device configuration profiles",
- "powershellScriptTitle": "Powershell scripts"
- },
- "TermsOfUse": {
- "Languages": {
- "addLanguage": "Add language",
- "af": "Afrikaans",
- "am": "Amharic",
- "arSA": "Arabic (Saudi Arabia)",
- "as": "Assamese",
- "az": "Azerbaijani",
- "be": "Belarusian",
- "bg": "Bulgarian",
- "bn": "Bangla",
- "bnIN": "Bangla (India)",
- "bs": "Bosnian",
- "ca": "Catalan",
- "caESvalencia": "Valencian (Spain)",
- "cs": "Czech",
- "cy": "Welsh",
- "da": "Danish",
- "de": "German",
- "default": "Default",
- "defaultDetailsTag": "{0} (Default)",
- "el": "Greek",
- "en": "English",
- "enGB": "English (United Kingdom)",
- "es": "Spanish",
- "esMX": "Spanish (Mexico)",
- "et": "Estonian",
- "eu": "Basque",
- "fa": "Persian",
- "fi": "Finnish",
- "fil": "Filipino",
- "fr": "French",
- "frCA": "French (Canada)",
- "ga": "Irish",
- "gd": "Scottish Gaelic",
- "gl": "Galician",
- "gu": "Gujarati",
- "ha": "Hausa",
- "he": "Hebrew",
- "hi": "Hindi",
- "hr": "Croatian",
- "hu": "Hungarian",
- "hy": "Armenian",
- "id": "Indonesian",
- "ig": "Igbo",
- "is": "Icelandic",
- "it": "Italian",
- "ja": "Japanese",
- "ka": "Georgian",
- "kk": "Kazakh",
- "km": "Khmer",
- "kn": "Kannada",
- "ko": "Korean",
- "kok": "Konkani",
- "kuArab": "Central Kurdish (Arabic)",
- "ky": "Kyrgyz",
- "languageOptions": "Language Options",
- "lb": "Luxembourgish",
- "lo": "Lao",
- "lt": "Lithuanian",
- "lv": "Latvian",
- "mi": "Maori",
- "mk": "Macedonian",
- "ml": "Malayalam",
- "mn": "Mongolian",
- "mr": "Marathi",
- "ms": "Malay",
- "mt": "Maltese",
- "ne": "Nepali",
- "nl": "Dutch",
- "nnNO": "Norwegian, Nynorsk (Norway)",
- "no": "Norwegian",
- "notSpecified": "Language not specified",
- "nso": "Sesotho sa Leboa",
- "or": "Odia",
- "paArabPK": "Punjabi (Islamic Republic of Pakistan)",
- "paIN": "Punjabi (India)",
- "pl": "Polish",
- "prs": "Dari",
- "ptBR": "Portuguese (Brazil)",
- "ptPT": "Portuguese (Portugal)",
- "quz": "Quechua",
- "removeLanguage": "Remove language",
- "ro": "Romanian",
- "ru": "Russian",
- "rw": "Kinyarwanda",
- "sd": "Sindhi",
- "si": "Sinhala",
- "sk": "Slovak",
- "sl": "Slovenian",
- "sq": "Albanian",
- "srCyrlBA": "Serbian (Cyrillic, Bosnia and Herzegovina)",
- "srCyrlRS": "Serbian (Cyrillic, Serbia)",
- "srLatnRS": "Serbian (Latin, Serbia)",
- "sv": "Swedish",
- "sw": "Kiswahili",
- "ta": "Tamil",
- "te": "Telugu",
- "tg": "Tajik",
- "th": "Thai",
- "ti": "Tigrinya",
- "tk": "Turkmen",
- "tn": "Setswana",
- "tr": "Turkish",
- "tt": "Tatar",
- "ug": "Uyghur",
- "uk": "Ukrainian",
- "ur": "Urdu",
- "uz": "Uzbek",
- "vi": "Vietnamese",
- "wo": "Wolof",
- "xh": "isiXhosa",
- "yo": "Yoruba",
- "zhHans": "Chinese (Simplified)",
- "zhHant": "Chinese (Traditional)",
- "zu": "isiZulu"
- },
- "AcceptanceExpirationFrequency": {
- "annually": "Annually",
- "biannually": "Bi-annually",
- "monthly": "Monthly",
- "quarterly": "Quarterly"
- },
- "Wizard": {
- "AgreementTargetEntityScope": {
- "NotSelected": {
- "label": "None selected"
- },
- "selectEntityTitle": "Select group",
- "title": "Select group"
- },
- "PolicyFile": {
- "Languages": {
-
- },
- "Validations": {
- "duplicateLanguage": "Oops, {0} appears to be selected multiple times. Language selection must be unique."
- }
- },
- "PolicyTemplate": {
- "InfoBox": {
- "allGuestsAllApps": "A conditional access policy will be created for all guests and all cloud apps. This policy impacts the Azure portal. Once this is created you might be required to sign-out and sign-in.",
- "allUsersAllApps": "A conditional access policy will be created for all users and all cloud apps. This policy impacts the Azure portal. Once this is created you will be required to sign-out and sign-in.",
- "custom": "Select the users, groups, and apps that this Terms of Use will be applied to.",
- "noPolicy": "This terms of use will appear in the grant control list when creating a conditional access policy."
- }
- },
- "Section": {
- "conditionalAccessSubtitle": "Enforce with conditional access policy templates",
- "conditionalAccessTitle": "Conditional access",
- "termsOfUseSubtitle": "Create and upload documents",
- "termsOfUseTitle": "Terms of use"
- },
- "acceptanceDurationInfo": "The terms of use will be enforced immediately and each user will have to re-consent every specified number of days.",
- "acceptanceDurationLabel": "Duration before re-acceptance required (days)",
- "acceptanceDurationPlaceholder": "Example: '90'",
- "acceptanceExpirationFrequencyInfo": "Require users to consent on a recurring basis.",
- "acceptanceExpirationFrequencyLabel": "Frequency",
- "acceptanceExpirationStartDateTimeInfo": "The terms of use will be enforced immediately and users will be required to re-consent on this date.",
- "acceptanceExpirationStartDateTimeLabel": "Expire starting on",
- "agreementIsPerDeviceAcceptanceRequiredInfo": "The end users will be required to consent to the terms of use on every device.",
- "agreementIsPerDeviceAcceptanceRequiredLabel": "Require users to consent on every device",
- "agreementIsViewingBeforeAcceptanceRequiredInfo": "The end users will be required to view the terms of use prior to accepting.",
- "agreementIsViewingBeforeAcceptanceRequiredLabel": "Require users to expand the terms of use",
- "agreementNameInfo": "Name will be used to manage the terms of use within the Azure portal.",
- "agreementNameLabel": "Name",
- "agreementNamePlaceholderText": "Example: 'All users terms of use'",
- "agreementRequirmentLabel": "Required Upon",
- "agreementTargetEntityLabel": "Users targeted",
- "agreementUploadPolicyAriaLabelText": "Upload required PDF {0}",
- "agreementUploadPolicyLabel": "Terms of use",
- "agreementUploadPolicyPlaceholderText": "Upload required PDF",
- "createButtonLabel": "Create",
- "createPolicyInfo": "In order to enforce the terms of use, a conditional access policy is required. You can create a conditional access policy targeted to specific users and applications later or use one of the predefined templates.",
- "createPolicyLabel": "Create a policy",
- "isAcceptanceExpirationEnabledInfo": "The terms of use will be enforced immediately and all users will be forced to re-consent on a schedule.",
- "isAcceptanceExpirationEnabledLabel": "Expire consents",
- "pdfValidationInvalidFileFormat": "The file must be in the .pdf format.",
- "policyFilesInfo": "Upload a PDF file containing the terms of use that your end users must accept. Based on end user preferences they will be shown the appropriate language or if not match the default language will be shown. For end users agreeing on mobile devices, we recommend the PDF font size to be at least 24 pt. Display name will be the title of the terms of use that is presented to the end user.",
- "policyFilesLabel": "Terms of use document",
- "policyTemplateInfo": "These templates are pre configured conditional access policies that are targeted to specific users and applications.",
- "policyTemplateLabel": "Policy templates",
- "title": "New terms of use"
- },
- "Details": {
- "Link": {
- "auditEvent": "View audit logs",
- "delete": "Delete",
- "download": "Preview PDF",
- "edit": "Edit"
- },
- "Property": {
- "acceptanceDuration": "Duration before re-acceptance required (days)",
- "acceptanceExpirationFrequency": "Frequency",
- "acceptanceExpirationStartDateTime": "Expire starting on",
- "accepted": "Users accepted",
- "declined": "Users declined",
- "displayname": "Display name",
- "isAcceptanceExpirationEnable": "Expire consents",
- "isPerDeviceAcceptanceRequired": "Require users to consent on every device",
- "isViewingBeforeAcceptanceRequired": "Require users to expand the terms of use",
- "name": "Name"
+ "IncludedDrivers": {
+ "label": "Included drivers"
+ },
+ "SelectDrivers": {
+ "header": "Select drivers to include in your bulk action"
+ },
+ "SelectDriversToInclude": {
+ "button": "Select drivers to include"
+ },
+ "SelectLessDrivers": {
+ "validation": "At most one hundred drivers can be selected"
+ },
+ "SelectMoreDrivers": {
+ "validation": "At least one driver should be selected"
+ },
+ "SelectedDrivers": {
+ "label": "Selected drivers"
+ },
+ "availabilityDate": "Make available in Windows Update",
+ "bladeTitle": "Driver updates Windows 10 and later (preview)",
+ "lastSync": "Last sync:",
+ "lastSyncDefaultText": "Pending initial inventory collection",
+ "loadError": "Loading failed!"
+ },
+ "DriverStatus": {
+ "approved": "Approved",
+ "declined": "Declined",
+ "export": "Exporting recommended drivers",
+ "needsReview": "Needs review",
+ "paused": "Paused"
+ },
+ "DriversToReview": {
+ "text": "{0} to review"
+ },
+ "Subtitle": {
+ "automatic": "Automatic approval driver update policy",
+ "manual": "Manual approval driver update policy"
},
- "Tab": {
- "cAPolicies": "Conditional access policies",
- "details": "Details",
- "languages": "Languages"
- }
- }
- },
- "AzureIAMCommon": {
- "Recommended": "Recommended",
- "CountryNames": {
- "countryNameNR": "Nauru",
- "countryNameBH": "Bahrain",
- "countryNameZA": "South Africa",
- "countryNameJO": "Jordan",
- "countryNameSD": "Sudan",
- "countryNameNU": "Niue",
- "countryNameCZ": "Czech Republic",
- "countryNameLT": "Lithuania",
- "countryNameTK": "Tokelau",
- "countryNameEC": "Ecuador",
- "countryNameVU": "Vanuatu",
- "countryNameUG": "Uganda",
- "countryNameLI": "Liechtenstein",
- "countryNameHK": "Hong Kong SAR",
- "countryNameGH": "Ghana",
- "countryNameSA": "Saudi Arabia",
- "countryNamePG": "Papua New Guinea",
- "countryNameBW": "Botswana",
- "countryNameDG": "Diego Garcia",
- "countryNameIN": "India",
- "countryNameHN": "Honduras",
- "countryNameRO": "Romania",
- "countryNameKZ": "Kazakhstan",
- "countryNameLC": "Saint Lucia",
- "countryNameGE": "Georgia",
- "countryNameTT": "Trinidad and Tobago",
- "countryNameMP": "Northern Mariana Islands",
- "countryNameMV": "Maldives",
- "countryNameFI": "Finland",
- "countryNameNO": "Norway",
- "countryNameEE": "Estonia",
- "countryNameVE": "Venezuela",
- "countryNameUZ": "Uzbekistan",
- "countryNameME": "Montenegro",
- "countryNameTJ": "Tajikistan",
- "countryNameAW": "Aruba",
- "countryNameFR": "France",
- "countryNameOM": "Oman",
- "countryNameAO": "Angola",
- "countryNameIT": "Italy",
- "countryNameAZ": "Azerbaijan",
- "countryNameKG": "Kyrgyzstan",
- "countryNameWF": "Wallis and Futuna",
- "countryNameTL": "Timor-Leste",
- "countryNameFK": "Falkland Islands (Islas Malvinas)",
- "countryNameGY": "Guyana",
- "countryNameSS": "South Sudan",
- "countryNameMM": "Myanmar",
- "countryNameHT": "Haiti",
- "countryNameSY": "Syria",
- "countryNameMD": "Moldova",
- "countryNameVC": "Saint Vincent and the Grenadines",
- "countryNameID": "Indonesia",
- "countryNameRE": "Reunion",
- "countryNameER": "Eritrea",
- "countryNameMK": "North Macedonia",
- "countryNameTG": "Togo",
- "countryNamePF": "French Polynesia",
- "countryNameKY": "Cayman Islands",
- "countryNameIO": "British Indian Ocean Territory",
- "countryNameRU": "Russia",
- "countryNameMA": "Morocco",
- "countryNameAU": "Australia",
- "countryNameBO": "Bolivia",
- "countryNameVA": "Holy See (Vatican City State)",
- "countryNameVG": "Virgin Islands, British",
- "countryNameFM": "Micronesia",
- "countryNameAQ": "Antarctica",
- "countryNameZM": "Zambia",
- "countryNameBR": "Brazil",
- "countryNameIS": "Iceland",
- "countryNamePE": "Peru",
- "countryNameBG": "Bulgaria",
- "countryNamePR": "Puerto Rico",
- "countryNameGI": "Gibraltar",
- "countryNameBS": "Bahamas, The",
- "countryNameJE": "Jersey",
- "countryNameMO": "Macao SAR",
- "countryNameRW": "Rwanda",
- "countryNameAS": "American Samoa",
- "countryNameBQ": "Bonaire, Sint Eustatius, and Saba",
- "countryNameMF": "Saint Martin",
- "countryNameTM": "Turkmenistan",
- "countryNameML": "Mali",
- "countryNameTO": "Tonga",
- "countryNameNC": "New Caledonia",
- "countryNameAC": "Ascension Island",
- "countryNameBN": "Brunei",
- "countryNameBD": "Bangladesh",
- "countryNameMW": "Malawi",
- "countryNameGM": "Gambia",
- "countryNameGA": "Gabon",
- "countryNameCA": "Canada",
- "countryNameSH": "Saint Helena",
- "countryNameYT": "Mayotte",
- "countryNameMN": "Mongolia",
- "countryNamePA": "Panama",
- "countryNameCM": "Cameroon",
- "countryNameNE": "Niger",
- "countryNameCW": "Curaçao",
- "countryNameJP": "Japan",
- "countryNameCY": "Cyprus",
- "countryNameCD": "Democratic Republic of Congo",
- "countryNameTN": "Tunisia",
- "countryNameTR": "Türkiye",
- "countryNameWS": "Samoa",
- "countryNameSE": "Sweden",
- "countryNameXK": "Kosovo",
- "countryNameKH": "Cambodia",
- "countryNamePL": "Poland",
- "countryNameDZ": "Algeria",
- "countryNameLR": "Liberia",
- "countryNameSO": "Somalia",
- "countryNameDM": "Dominica",
- "countryNameEG": "Egypt",
- "countryNameGF": "French Guiana",
- "countryNameNZ": "New Zealand",
- "countryNamePS": "Palestinian Authority",
- "countryNameIL": "Israel",
- "countryNameSL": "Sierra Leone",
- "countryNameGR": "Greece",
- "countryNameNG": "Nigeria",
- "countryNameMR": "Mauritania",
- "countryNameVI": "Virgin Islands, U.S.",
- "countryNameGQ": "Equatorial Guinea",
- "countryNameMX": "Mexico",
- "countryNameDJ": "Djibouti",
- "countryNameGN": "Guinea",
- "countryNameCN": "China",
- "countryNameMZ": "Mozambique",
- "countryNameBV": "Bouvet Island",
- "countryNameNF": "Norfolk Island",
- "countryNameTZ": "Tanzania",
- "countryNameAI": "Anguilla",
- "countryNameGS": "South Georgia and the South Sandwich Islands",
- "countryNameRS": "Serbia",
- "countryNameCC": "Cocos (Keeling) Islands",
- "countryNameNA": "Namibia",
- "countryNameDE": "Germany",
- "countryNameCG": "Republic of Congo",
- "countryNameKW": "Kuwait",
- "countryNameMH": "Marshall Islands",
- "countryNameVN": "Vietnam",
- "countryNameBY": "Belarus",
- "countryNameMY": "Malaysia",
- "countryNameST": "São Tomé and Príncipe",
- "countryNameLS": "Lesotho",
- "countryNameBI": "Burundi",
- "countryNameTD": "Chad",
- "countryNameCX": "Christmas Island",
- "countryNameIR": "Iran",
- "countryNameTV": "Tuvalu",
- "countryNameGW": "Guinea-Bissau",
- "countryNameUA": "Ukraine",
- "countryNameCU": "Cuba",
- "countryNameCO": "Colombia",
- "countryNameNI": "Nicaragua",
- "countryNameHR": "Croatia",
- "countryNameSC": "Seychelles",
- "countryNameNL": "Netherlands",
- "countryNameUM": "US Minor Outlying Islands",
- "countryNameIM": "Isle of Man",
- "countryNameFJ": "Fiji",
- "countryNameSR": "Suriname",
- "countryNameGT": "Guatemala",
- "countryNameSM": "San Marino",
- "countryNameLA": "Laos",
- "countryNameGB": "United Kingdom",
- "countryNameBB": "Barbados",
- "countryNameSI": "Slovenia",
- "countryNameAM": "Armenia",
- "countryNameAR": "Argentina",
- "countryNamePM": "Saint Pierre and Miquelon",
- "countryNameTF": "French Southern and Antarctic Lands",
- "countryNameDO": "Dominican Republic",
- "countryNameZW": "Zimbabwe",
- "countryNameMQ": "Martinique",
- "countryNamePT": "Portugal",
- "countryNameCF": "Central African Republic",
- "countryNameBE": "Belgium",
- "countryNameKM": "Comoros",
- "countryNameLY": "Libya",
- "countryNameIE": "Ireland",
- "countryNameKP": "North Korea",
- "countryNameGG": "Guernsey",
- "countryNameSK": "Slovakia",
- "countryNameTC": "Turks and Caicos Islands",
- "countryNameNP": "Nepal",
- "countryNameBF": "Burkina Faso",
- "countryNameYE": "Yemen",
- "countryNameBA": "Bosnia and Herzegovina",
- "countryNameGP": "Guadeloupe",
- "countryNameMS": "Montserrat",
- "countryNameCL": "Chile",
- "countryNameIQ": "Iraq",
- "countryNameSJ": "Svalbard and Jan Mayen Island",
- "countryNameAX": "Åland Islands",
- "countryNameKE": "Kenya",
- "countryNameGU": "Guam",
- "countryNameBM": "Bermuda",
- "countryNameFO": "Faroe Islands",
- "countryNameBL": "Saint Barthélemy",
- "countryNameLB": "Lebanon",
- "countryNameJM": "Jamaica",
- "countryNameAF": "Afghanistan",
- "countryNameES": "Spain",
- "countryNameMC": "Monaco",
- "countryNameSG": "Singapore",
- "countryNameAL": "Albania",
- "countryNameSN": "Senegal",
- "countryNameSZ": "Eswatini",
- "countryNameBZ": "Belize",
- "countryNameCI": "Côte d’Ivoire",
- "countryNameTW": "Taiwan",
- "countryNameUY": "Uruguay",
- "countryNameCK": "Cook Islands",
- "countryNameTH": "Thailand",
- "countryNameHM": "Heard Island and McDonald Islands",
- "countryNameGD": "Grenada",
- "countryNameUS": "United States",
- "countryNameAT": "Austria",
- "countryNameKR": "Korea, Republic of",
- "countryNamePK": "Pakistan",
- "countryNameDK": "Denmark",
- "countryNameSV": "El Salvador",
- "countryNamePW": "Palau",
- "countryNameET": "Ethiopia",
- "countryNameMG": "Madagascar",
- "countryNameCR": "Costa Rica",
- "countryNameLU": "Luxembourg",
- "countryNameQA": "Qatar",
- "countryNameBT": "Bhutan",
- "countryNameSB": "Solomon Islands",
- "countryNameAE": "United Arab Emirates",
- "countryNameAD": "Andorra",
- "countryNameCV": "Cabo Verde",
- "countryNameAG": "Antigua and Barbuda",
- "countryNameMU": "Mauritius",
- "countryNameHU": "Hungary",
- "countryNameSX": "Sint Maarten",
- "countryNameCH": "Switzerland",
- "countryNamePN": "Pitcairn Islands",
- "countryNameGL": "Greenland",
- "countryNamePH": "Philippines",
- "countryNameMT": "Malta",
- "countryNameKN": "Saint Kitts and Nevis",
- "countryNameLK": "Sri Lanka",
- "countryNameKI": "Kiribati",
- "countryNameBJ": "Benin",
- "countryNameLV": "Latvia",
- "countryNamePY": "Paraguay"
- }
- }
+ "SyncNotification": {
+ "failure": "Unable to sync {0}",
+ "failureDescription": "We encountered an error and were unable to complete the requested sync. Please try again.",
+ "pending": "{0} sync in progress",
+ "pendingDescription": "We are retrieving the most recent data. This process may take several minutes.",
+ "success": "{0} sync complete",
+ "successDescription": "Sync with WUfB service completed at {0}"
+ },
+ "SyncSpinner": {
+ "text": "A sync is in progress. This could take several minutes. Look for an alert or check back in a few minutes."
+ },
+ "TabName": {
+ "basics": "Basics",
+ "driverUpdateSettings": "Settings",
+ "otherDrivers": "Other drivers",
+ "properties": "Properties",
+ "recommendedDrivers": "Recommended drivers"
+ },
+ "driverAddFilter": "Add filter",
+ "driverApplicableDevices": "Applicable devices",
+ "driverApprovalStatus": "Status",
+ "driverBulkActions": "Bulk actions",
+ "driverClass": "Driver class",
+ "driverCount": "Showing {0} to {1} of {2} records",
+ "driverFilterNoneSelected": "None selected",
+ "driverManufacturer": "Manufacturer",
+ "driverName": "Driver name",
+ "driverNameLower": "windows driver update deployment",
+ "driverNameUpper": "Windows driver update deployment",
+ "driverRefresh": "Refresh",
+ "driverReleaseDate": "Release date",
+ "driverSearch": "Search",
+ "driverSearchKeyword": "Enter search keyword",
+ "driverVersion": "Version",
+ "firstDeploymentDate": "First Deployment",
+ "infoBoxText": "Inventory can take up to 24 hours to populate after a policy is assigned and created.",
+ "textBlockText": "Select your policy approval and deployment settings. Choose to set up a policy to approve and deploy updates automatically or manually. The approval method cannot be changed once a policy is created, but changes to individual driver approvals and deployment details will be possible once an inventory is built for assigned devices."
+ },
+ "TACSettings": {
+ "edgeSettings": "Edge configuration settings",
+ "edgeWindowsDataProtectionSettings": "Edge (Windows) data protection settings - Preview",
+ "edgeWindowsSettings": "Edge (Windows) configuration settings - Preview",
+ "generalAppConfig": "General app configuration",
+ "generalSettings": "General configuration settings",
+ "outlookSMIMEConfig": "Outlook S/MIME settings",
+ "outlookSettings": "Outlook configuration settings",
+ "sMIME": "S/MIME"
+ }
}
\ No newline at end of file
diff --git a/Extensions/Compare.psm1 b/Extensions/Compare.psm1
index 26d66ed..aea5b90 100644
--- a/Extensions/Compare.psm1
+++ b/Extensions/Compare.psm1
@@ -11,7 +11,7 @@ Objects can be compared based on Properties or Documentatation info.
function Get-ModuleVersion
{
- '1.1.0'
+ '1.2.0'
}
function Invoke-InitializeModule
@@ -639,7 +639,8 @@ function Start-BulkCompareExportObjects
else
{
$sourceObj = Get-GraphObject $curObject.Object $curObject.ObjectType
- $fileObj.Object | Add-Member Noteproperty -Name "@ObjectFromFile" -Value $true -Force
+ $fileObj.Object | Add-Member Noteproperty -Name "@ObjectFromFile" -Value $true -Force
+ $fileObj.Object | Add-Member Noteproperty -Name "@ObjectFileName" -Value $fileObj.FileInfo.FullName -Force
$compareProperties = Compare-Objects $sourceObj.Object $fileObj.Object $item.ObjectType
}
@@ -825,7 +826,8 @@ function Start-BulkCompareExportIntuneToNamedExportedObjects
else
{
$sourceObj = Get-GraphObject $graphObject.Object $graphObject.ObjectType
- $fileObj.Object | Add-Member Noteproperty -Name "@ObjectFromFile" -Value $true -Force
+ $fileObj.Object | Add-Member Noteproperty -Name "@ObjectFromFile" -Value $true -Force
+ $fileObj.Object | Add-Member Noteproperty -Name "@ObjectFileName" -Value $fileObj.FileInfo.FullName -Force
$compareProperties = Compare-Objects $sourceObj.Object $fileObj.Object $item.ObjectType
}
@@ -1008,8 +1010,10 @@ function Start-BulkCompareExportFolders
}
else
{
- $fileSourceObj.Object | Add-Member Noteproperty -Name "@ObjectFromFile" -Value $true -Force
+ $fileSourceObj.Object | Add-Member Noteproperty -Name "@ObjectFromFile" -Value $true -Force
+ $fileSourceObj.Object | Add-Member Noteproperty -Name "@ObjectFileName" -Value $fileSourceObj.FileInfo.FullName -Force
$compareObject.Object | Add-Member Noteproperty -Name "@ObjectFromFile" -Value $true -Force
+ $compareObject.Object | Add-Member Noteproperty -Name "@ObjectFileName" -Value $compareObject.FileInfo.FullName -Force
$compareProperties = Compare-Objects $compareObject.Object $fileSourceObj.Object $item.ObjectType
}
@@ -1297,6 +1301,7 @@ function Start-CompareExportObject
}
}
+ $compareObj | Add-Member Noteproperty -Name "@ObjectFileName" -Value $global:txtCompareFile.Text -Force
$compareObj | Add-Member Noteproperty -Name "@ObjectFromFile" -Value $true -Force
$compareResult = Compare-Objects $obj.Object $compareObj $obj.ObjectType
@@ -1381,7 +1386,7 @@ function Compare-ObjectsBasedonProperty
$coreProps = @((?? $objectType.NameProperty "displayName"), "Description", "Id", "createdDateTime", "lastModifiedDateTime", "version")
$postProps = @("Advertisements")
- $skipProps = @("@ObjectFromFile")
+ $skipProps = @("@ObjectFromFile","@ObjectFileName")
$skipPropertiesToCompare = @()
if($skipBasicProperties) {
$skipPropertiesToCompare += "roleScopeTagIds"
diff --git a/Extensions/Documentation.psm1 b/Extensions/Documentation.psm1
index 4a7f1f5..c3703ff 100644
--- a/Extensions/Documentation.psm1
+++ b/Extensions/Documentation.psm1
@@ -20,7 +20,7 @@ $global:documentationProviders = @()
function Get-ModuleVersion
{
- '2.2.1'
+ '2.3.0'
}
function Invoke-InitializeModule
@@ -228,6 +228,7 @@ function Get-ObjectDocumentation
$script:applicabilityRules = @()
$script:objectAssignments = @()
$script:objectScripts = @()
+ $script:customTables = @()
$script:admxCategories = $null
$script:ObjectTypeFullTable = @{} # Hash table with objects that should be documented in a single table eg ScopeTags
@@ -351,6 +352,7 @@ function Get-ObjectDocumentation
Settings = $script:objectSettingsData
ComplianceActions = $script:objectComplianceActionData
ApplicabilityRules = $script:applicabilityRules
+ CustomTables = $script:customTables
Assignments = $script:objectAssignments
Scripts = $script:objectScripts
DisplayProperties = $properties
@@ -386,11 +388,40 @@ function Invoke-ObjectDocumentation
$global:intentCategoryDefs = $null
$global:cfgCategories = $null
$script:admxCategories = $null
+ $script:migTable = $null
$script:DocumentationLanguage = "en"
$script:objectSeparator = [System.Environment]::NewLine
$script:propertySeparator = ","
+ $loadExportedInfo = $false
+
+ if($documentationObj.Object."@ObjectFileName") {
+ $path = [IO.Path]::GetDirectoryName($documentationObj.Object."@ObjectFileName")
+ for($i = 0;$i -lt 2;$i++)
+ {
+ if($i -gt 0)
+ {
+ # Get parent directory
+ $path = [io.path]::GetDirectoryName($path)
+ }
+
+ $migFileName = Join-Path $path "MigrationTable.json"
+ try
+ {
+ if([IO.File]::Exists($migFileName))
+ {
+ Write-Log "Load Migration table from $migFileName"
+ $script:migTable = ConvertFrom-Json (Get-Content $migFileName -Raw)
+ }
+ }
+ catch {}
+ }
+ if(-not $script:migTable) {
+ Write-Log "Migration table not found" 2
+ }
+ }
+
Get-ObjectDocumentation $documentationObj
}
@@ -636,6 +667,19 @@ function Add-BasicDefaultValues
}
}
+function Add-CustomTable
+{
+ param($TableId, $Columns = @("Name", "Value"), $Values, [int]$Order = 100, $LanguageId = "")
+
+ $script:customTables += [PSCustomObject]@{
+ Id = $TableId
+ Columns = $Columns
+ Values = $Values
+ LanguageId = $LanguageId
+ Order = $Order
+ }
+}
+
function Add-BasicAdditionalValues
{
param($obj, $objectType)
@@ -4385,7 +4429,7 @@ function local:Invoke-StartDocumentatiom
$migFileName = [IO.Path]::Combine($diSource.FullName,"MigrationTable.json")
if([IO.File]::Exists($migFileName) -eq $false)
{
- Write-Log "MigrationTable not found. Groups will be documented with GroupId" 2
+ Write-Log "MigrationTable not found. Groups will be documented with GroupId" 2
}
else
{
@@ -4927,7 +4971,11 @@ function Invoke-CSVProcessItem
{
if($documentedObj.Assignments[0].RawIntent)
{
- $properties = @("GroupMode","Group","Category","SubCategory")
+ $properties = @("GroupMode","Group","Category","SubCategory")
+ }
+ elseif($documentedObj.Assignments[0].Group)
+ {
+ $properties = @("GroupMode","Group","Category")
}
else
{
diff --git a/Extensions/DocumentationCustom.psm1 b/Extensions/DocumentationCustom.psm1
index d5027e5..91579a3 100644
--- a/Extensions/DocumentationCustom.psm1
+++ b/Extensions/DocumentationCustom.psm1
@@ -10,7 +10,7 @@ This module will also document some objects based on PowerShell functions
function Get-ModuleVersion
{
- '1.6.5'
+ '1.6.6'
}
function Invoke-InitializeModule
@@ -76,7 +76,8 @@ function Invoke-CDDocumentObject
Properties = @("Name","Value")
}
}
- elseif($type -eq '#microsoft.graph.androidManagedStoreAppConfiguration') {
+ elseif($type -eq '#microsoft.graph.androidForWorkMobileAppConfiguration' -or
+ $type -eq '#microsoft.graph.androidManagedStoreAppConfiguration') {
Invoke-CDDocumentAndroidManagedStoreAppConfiguration $documentationObj
@@ -84,8 +85,7 @@ function Invoke-CDDocumentObject
Properties = @("Name","Value","Category","SubCategory")
}
}
- elseif($type -eq '#microsoft.graph.androidForWorkMobileAppConfiguration' -or
- $type -eq '#microsoft.graph.iosMobileAppConfiguration')
+ elseif($type -eq '#microsoft.graph.iosMobileAppConfiguration')
{
Invoke-CDDocumentMobileAppConfiguration $documentationObj
return [PSCustomObject]@{
@@ -186,7 +186,7 @@ function Get-CDAllCloudApps
{
if(-not $script:allCloudApps)
{
- $script:allCloudApps = (Invoke-GraphRequest -url "/servicePrincipals?`$select=displayName,appId&top=999" -ODataMetadata "minimal").value
+ $script:allCloudApps = (Invoke-GraphRequest -url "/servicePrincipals?`$select=displayName,appId&top=999" -ODataMetadata "minimal" -AllPages).value
}
$script:allCloudApps
}
@@ -198,7 +198,7 @@ function Get-CDAllTenantApps
$script:allTenantApps = Get-DocOfflineObjects "Applications"
if(-not $script:allTenantApps)
{
- $script:allTenantApps =(Invoke-GraphRequest -url "/deviceAppManagement/mobileApps?`$select=displayName,id&top=999" -ODataMetadata "minimal").value
+ $script:allTenantApps =(Invoke-GraphRequest -url "/deviceAppManagement/mobileApps?`$select=displayName,id&top=999" -ODataMetadata "minimal" -AllPages).value
}
}
$script:allTenantApps
@@ -1885,26 +1885,20 @@ function Invoke-CDDocumentAndroidManagedStoreAppConfiguration
}
# Not the best way. BundleId should be used but then full app info is required
- if($obj.packageId -eq "com.microsoft.office.outlook*")
+ if($obj.packageId -eq "com.microsoft.office.outlook")
{
if([IO.File]::Exists(($global:AppRootFolder + "\Documentation\ObjectInfo\#AppConfigOutlookDevice.json")))
{
- $tmp = $obj.settings | Where { $_.appConfigKey -eq "com.microsoft.outlook.EmailProfile.AccountType" }
+ $tmp = $payloadData.managedProperty | Where { $_.key -eq "com.microsoft.outlook.EmailProfile.AccountType" }
if($tmp){ $configEmail=$true }else{ $configEmail=$false }
$outlookSettings = [PSCustomObject]@{
configureEmail = $configEmail
}
- foreach($setting in $obj.settings)
+
+ foreach($managedProperty in $payloadData.managedProperty)
{
- if($setting.appConfigKeyType -eq "booleanType")
- {
- $value = $setting.appConfigKeyValue -eq "true"
- }
- else
- {
- $value = $setting.appConfigKeyValue
- }
- $outlookSettings | Add-Member Noteproperty -Name $setting.appConfigKey -Value $value -Force
+ $valueProperty = $managedProperty.PSObject.Properties | Where-Object Name -like "value*"
+ $outlookSettings | Add-Member Noteproperty -Name $managedProperty.key -Value $valueProperty.Value -Force
}
$jsonObj = Get-Content ($global:AppRootFolder + "\Documentation\ObjectInfo\#AppConfigOutlookDevice.json") | ConvertFrom-Json
@@ -1914,6 +1908,8 @@ function Invoke-CDDocumentAndroidManagedStoreAppConfiguration
$addedSettings = Get-DocumentedSettings
+ $additionalSettings = @()
+
foreach($managedProperty in $payloadData.managedProperty)
{
if(($addedSettings | Where EntityKey -eq $managedProperty.key)) { continue }
@@ -1926,14 +1922,44 @@ function Invoke-CDDocumentAndroidManagedStoreAppConfiguration
$value = $value -join ","
}
- Add-CustomSettingObject ([PSCustomObject]@{
+ $additionalSettings += ([PSCustomObject]@{
Name = $managedProperty.key
+ ValueType = $valueProperty.Name.SubString(5)
Value = $value
EntityKey = $managedProperty.key
Category = Get-LanguageString "TACSettings.generalSettings"
SubCategory = Get-LanguageString "SettingDetails.additionalConfiguration"
})
}
+
+ if($additionalSettings.Count -gt 0) {
+ Add-CustomTable "AdditionalSettings" @("Name","ValueType","Value") $additionalSettings -Order 110
+ }
+
+ $permissions = @()
+
+ foreach($permission in $obj.permissionActions)
+ {
+ $permissionTemp = $permission.permission.Split('.')[-1]
+ if($permissionTemp) {
+ $permissionLngId = $permissionTemp -replace "_", ""
+
+ $permissionStr = ?? (Get-LanguageString "AndroidForWorkAppPermissions.Permissions.$($permissionLngId)") $permissionTemp
+ }
+ else {
+ $permissionStr = $permission.permission
+ }
+
+ $permissions += ([PSCustomObject]@{
+ Permission = $permissionStr
+ Action = ?? (Get-LanguageString "AndroidForWorkAppPermissions.Action.$($permission.action)") $permission.action
+ EntityKey = $permission.permission
+ })
+ }
+
+ if($permissions.Count -gt 0) {
+ Add-CustomTable "Permissions" @("Permission","Action") $permissions -Order 115 -LanguageId "AndroidForWorkAppPermissions.permissionsTitle"
+ }
}
}
@@ -2002,8 +2028,18 @@ function Invoke-CDDocumentMobileAppConfiguration
}
else
{
+ $isOutlook = $false
+
+ foreach($targetedAppId in $obj.targetedMobileApps) {
+ $app = $allApps | Where Id -eq $targetedAppId
+ if($app.displayName -eq "Microsoft Outlook") {
+ $isOutlook = $true
+ break
+ }
+ }
+
# Not the best way. BundleId should be used but then full app info is required
- if(($obj.packageId | Where { $_.appConfigKey -like "com.microsoft.outlook*" }))
+ if($isOutlook -or ($obj.packageId | Where { $_.appConfigKey -like "com.microsoft.outlook*" }))
{
if([IO.File]::Exists(($global:AppRootFolder + "\Documentation\ObjectInfo\#AppConfigOutlookDevice.json")))
{
@@ -3139,7 +3175,7 @@ function Invoke-CDDocumentConditionalAccess
Add-CustomSettingObject ([PSCustomObject]@{
Name = Get-LanguageString "AzureCA.WhatIfBlade.authenticationStrength"
- Value = $termsOfUse -join $script:objectSeparator
+ Value = $authenticationStrngth -join $script:objectSeparator
Category = $category
SubCategory = ""
EntityKey = "authenticationStrength"
diff --git a/Extensions/DocumentationHTML.psm1 b/Extensions/DocumentationHTML.psm1
index fb4affd..e650b30 100644
--- a/Extensions/DocumentationHTML.psm1
+++ b/Extensions/DocumentationHTML.psm1
@@ -1,6 +1,6 @@
function Get-ModuleVersion
{
- '1.0.1'
+ '1.1.0'
}
function Invoke-InitializeModule
@@ -332,7 +332,9 @@ function Invoke-HTMLProcessItem
$lngId = ?: ($tableType -eq "BasicInfo") "SettingDetails.basics" "TableHeaders.settings" -AddCategories
- Add-HTMLTableItems $obj $objectType ($documentedObj.$tableType) $properties $lngId -AddCategories -AddSubcategories
+ if(($documentedObj.$tableType).Count -gt 0) {
+ Add-HTMLTableItems $obj $objectType ($documentedObj.$tableType) $properties $lngId -AddCategories -AddSubcategories
+ }
}
if(($documentedObj.ComplianceActions | measure).Count -gt 0)
@@ -351,6 +353,11 @@ function Invoke-HTMLProcessItem
Add-HTMLObjectSettings $obj $objectType $documentedObj
+ foreach($customTable in ($documentedObj.CustomTables | Sort-Object -Property Order))
+ {
+ Add-HTMLTableItems $obj $objectType $customTable.Values $customTable.Columns $customTable.LanguageId -AddCategories -AddSubcategories
+ }
+
if(($documentedObj.Assignments | measure).Count -gt 0)
{
if($documentedObj.Assignments[0].RawIntent)
diff --git a/Extensions/DocumentationMD.psm1 b/Extensions/DocumentationMD.psm1
index e78d485..3ee4563 100644
--- a/Extensions/DocumentationMD.psm1
+++ b/Extensions/DocumentationMD.psm1
@@ -1,6 +1,6 @@
function Get-ModuleVersion
{
- '1.1.1'
+ '1.2.0'
}
function Invoke-InitializeModule
@@ -285,7 +285,9 @@ function Invoke-MDProcessItem
$lngId = ?: ($tableType -eq "BasicInfo") "SettingDetails.basics" "TableHeaders.settings" -AddCategories
- Add-MDTableItems $obj $objectType ($documentedObj.$tableType) $properties $lngId -AddCategories -AddSubcategories
+ if(($documentedObj.$tableType).Count -gt 0) {
+ Add-MDTableItems $obj $objectType ($documentedObj.$tableType) $properties $lngId -AddCategories -AddSubcategories
+ }
#Add-MDTableItems $obj $objectType ($documentedObj.$tableType) $properties $lngId `
# -AddCategories:($global:chkMDAddCategories.IsChecked -eq $true) `
@@ -308,6 +310,11 @@ function Invoke-MDProcessItem
Add-MDObjectSettings $obj $objectType $documentedObj
+ foreach($customTable in ($documentedObj.CustomTables | Sort-Object -Property Order))
+ {
+ Add-MDTableItems $obj $objectType $documentedObj $customTable.Values $customTable.Columns $customTable.LanguageId -AddCategories -AddSubcategories
+ }
+
if(($documentedObj.Assignments | measure).Count -gt 0)
{
if($documentedObj.Assignments[0].RawIntent)
diff --git a/Extensions/DocumentationWord.psm1 b/Extensions/DocumentationWord.psm1
index 047b45d..4665548 100644
--- a/Extensions/DocumentationWord.psm1
+++ b/Extensions/DocumentationWord.psm1
@@ -3,7 +3,7 @@
#https://docs.microsoft.com/en-us/office/vba/api/overview/word
function Get-ModuleVersion
{
- '1.6.0'
+ '1.7.0'
}
function Invoke-InitializeModule
@@ -208,7 +208,7 @@ function Invoke-WordPreProcessItems
{
try
{
- $script:doc = $wordApp.Documents.Add($global:txtWordDocumentTemplate.Text)
+ $script:doc = $script:wordApp.Documents.Add($global:txtWordDocumentTemplate.Text)
}
catch
{
@@ -217,7 +217,7 @@ function Invoke-WordPreProcessItems
}
else
{
- $script:doc = $wordApp.Documents.Add()
+ $script:doc = $script:wordApp.Documents.Add()
}
#Get BuiltIn properties
@@ -547,10 +547,12 @@ function Invoke-WordProcessItem
$lngId = ?: ($tableType -eq "BasicInfo") "SettingDetails.basics" "TableHeaders.settings" -AddCategories
- Add-DocTableItems $obj $objectType ($documentedObj.$tableType) $properties $lngId `
+ if(($documentedObj.$tableType).Count -gt 0) {
+ Add-DocTableItems $obj $objectType ($documentedObj.$tableType) $properties $lngId `
-AddCategories:($global:chkWordAddCategories.IsChecked -eq $true) `
-AddSubcategories:($global:chkWordAddSubCategories.IsChecked -eq $true) `
-ForceFullValue:($tableType -eq "BasicInfo")
+ }
}
if($global:cbWordDocumentationLevel.SelectedValue -ne "basic")
@@ -570,6 +572,11 @@ function Invoke-WordProcessItem
}
Add-DocObjectSettings $obj $objectType $documentedObj
+
+ foreach($customTable in ($documentedObj.CustomTables | Sort-Object -Property Order))
+ {
+ Add-DocTableItems $obj $objectType $documentedObj $customTable.Values $customTable.Columns $customTable.LanguageId -AddCategories -AddSubcategories
+ }
}
if(($documentedObj.Assignments | measure).Count -gt 0)
diff --git a/Extensions/EndpointManager.psm1 b/Extensions/EndpointManager.psm1
index 49a5c3b..314860f 100644
--- a/Extensions/EndpointManager.psm1
+++ b/Extensions/EndpointManager.psm1
@@ -10,7 +10,7 @@ This module is for the Endpoint Manager/Intune View. It manages Export/Import/Co
#>
function Get-ModuleVersion
{
- '3.9.7'
+ '3.9.8'
}
function Invoke-InitializeModule
@@ -472,8 +472,9 @@ function Invoke-InitializeModule
ViewID = "IntuneGraphAPI"
Permissons=@("DeviceManagementApps.ReadWrite.All")
Dependencies = @("Applications")
+ PreFilesImportCommand = { Start-PreFilesImportAppConfiguration @args }
PreImportAssignmentsCommand = { Start-PreImportAssignmentsAppConfiguration @args }
- #PostExportCommand = { Start-PostExportAppConfiguration @args }
+ PostExportCommand = { Start-PostExportAppConfiguration @args }
Icon = "AppConfiguration"
GroupId = "AppConfiguration"
})
@@ -674,6 +675,8 @@ function Invoke-InitializeModule
QUERYLIST = "`$filter=microsoft.graph.androidManagedStoreAppConfiguration/appSupportsOemConfig%20eq%20true"
API = "/deviceAppManagement/mobileAppConfigurations"
PreImportAssignmentsCommand = { Start-PreImportAssignmentsAppConfiguration @args }
+ PreFilesImportCommand = { Start-PreFilesImportAppConfiguration @args }
+ PostExportCommand = { Start-PostExportAppConfiguration @args }
Permissons=@("DeviceManagementConfiguration.ReadWrite.All")
Icon="DeviceConfiguration"
Dependencies = @("Applications")
@@ -1961,7 +1964,134 @@ function Start-PostExportAppConfiguration
{
param($obj, $objectType, $path)
- Add-EMAssignmentsToExportFile $obj $objectType $path
+ #Add-EMAssignmentsToExportFile $obj $objectType $path
+
+ Write-Log "Export app config for $($objectType.Id) with OData.Type: $($obj.'@OData.Type')"
+
+ if($obj.'@OData.Type' -eq "#microsoft.graph.androidManagedAppProtection" -or
+ $obj.'@OData.Type' -eq "#microsoft.graph.androidForWorkMobileAppConfiguration" -or
+ $obj.'@OData.Type' -eq "#microsoft.graph.androidManagedStoreAppConfiguration" -or
+ $obj.'@OData.Type' -eq "#microsoft.graph.iosMobileAppConfiguration")
+ {
+ $fileName = (Get-GraphObjectName $obj $objectType).Trim('.')
+ if((Get-SettingValue "AddIDToExportFile") -eq $true -and $obj.Id)
+ {
+ $fileName = ($fileName + "_" + $obj.Id)
+ }
+ $tmpObj = $null
+ $fileName = "$path\$((Remove-InvalidFileNameChars $fileName)).json"
+ if([IO.File]::Exists($fileName))
+ {
+ $tmpObj = Get-GraphObjectFromFile $fileName
+ }
+ else
+ {
+ Write-Log "File not found: $fileName. Could not add App names." 3
+ }
+
+ if(($tmpObj.targetedMobileApps | measure).Count -gt 0)
+ {
+ Write-Log "Add target apps info"
+ $targetedApps = @()
+ foreach($appId in $tmpObj.targetedMobileApps)
+ {
+ $appObj = Invoke-GraphRequest -Url "/deviceAppManagement/mobileApps/$($appId)" #?`select=id,displayName" -ODataMetadata "Minimal"
+ if($appObj)
+ {
+ Write-Log "Add target app info $($appObj.displayName) ($($appObj.Id)) of type $($appObj.'@OData.Type')"
+ $targetedApps += $appObj.displayName + '|!|' + $appObj.Id + '|!|' + $appObj.'@OData.Type'
+ }
+ }
+
+ if($targetedApps.Count -gt 0)
+ {
+ Write-Log "Add CustomRefTargetedApps property"
+ $tmpObj | Add-Member -MemberType NoteProperty -Name "#CustomRefTargetedApps" -Value ($targetedApps -join "|*|")
+ Write-Log "Save file $fileName"
+ Save-GraphObjectToFile $tmpObj $fileName
+ }
+ }
+ else
+ {
+ Write-Log "No target apps found" 2
+ }
+ }
+}
+
+function Start-PreFilesImportAppConfiguration
+{
+ param($objectType, $filesToImport)
+
+ $targetedAppsObjects = $filesToImport | Where { $null -ne $_.Object."#CustomRefTargetedApps" }
+
+ if(($targetedAppsObjects | measure).Count -gt 0)
+ {
+ Write-Log "Policies with Targeted Apps detected"
+ foreach($fileObject in $targetedAppsObjects)
+ {
+ Add-AppConfigurationTargets $objectType $fileObject
+ }
+ }
+ $filesToImport
+}
+
+function local:Add-AppConfigurationTargets
+{
+ param($obj, $fileObj)
+
+ if($fileObj.Object."#CustomRefTargetedApps" -and $fileObj.Object.targetedMobileApps)
+ {
+ Write-Log "Adding app target for $($fileObj.Object.displayName)"
+
+ $targetedAppsInfo = $fileObj.Object."#CustomRefTargetedApps"
+
+ $translatedTargetedApps = @()
+
+ if($targetedAppsInfo)
+ {
+ foreach($targetedApp in ($targetedAppsInfo -split "[|][*][|]"))
+ {
+ $appName, $appId, $appType = $targetedApp -split "[|][!][|]"
+ if(-not $appName -or -not $appId)
+ {
+ Write-Log "App Name and Id is missing in string: $appApp" 2
+ continue
+ }
+ $tmpApps = (Invoke-GraphRequest -Url "/deviceAppManagement/mobileApps?`$filter=displayName eq '$appName'").value
+ if(-not $tmpApps)
+ {
+ Write-Log "No application found with name $appName. $appId will not be translated and added to target list" 2
+ continue
+ }
+
+ Write-Log "Found $(($tmpApps | measure).Count) applications" 2
+ foreach ($tmpApp in $tmpApps) {
+ Write-Log "Found '$($tmpApp.displayName)' ($($tmpApp.id)) of type $($($tmpApp.'@OData.Type'))"
+ }
+
+ $tmpApp = $tmpApps | Where-Object '@OData.Type' -eq $appType
+ if(-not $tmpApp)
+ {
+ Write-Log "No $appName application found of type $appType. $appId will not be translated and added to target list" 2
+ }
+ elseif(($tmpApp | measure).Count -gt 1) {
+ Write-Log "$(($tmpApp | measure).Count) applications found with name '$appName' of type $appType. $appId will not be translated and added to target list" 2
+ }
+ else {
+ Write-Log "Found '$appName' with id $($tmpApp.Id) ($appType)"
+ $translatedTargetedApps += $tmpApp.Id
+ }
+ }
+
+ if($translatedTargetedApps.Count -gt 0) {
+ Write-Log "Updating translated targeted apps"
+ $fileObj.Object.targetedMobileApps = $translatedTargetedApps
+ }
+ else {
+ Write-Log "Could not find targeted apps in the evnironment. Verify that they are added. Policy import might fail" 3
+ }
+ }
+ }
}
function Start-PreImportAssignmentsAppConfiguration
@@ -2479,7 +2609,7 @@ function Start-PostFilesImportApplications
if(($refObjects | measure).Count -gt 0)
{
- Write-Log "Applicetions with Depnedency or Supersedence detected"
+ Write-Log "Applicetions with Dependency or Supersedence detected"
foreach($file in $refObjects)
{
Add-ApplicationReferences $file.ImportedObject $file.Object
diff --git a/Extensions/EndpointManagerInfo.psm1 b/Extensions/EndpointManagerInfo.psm1
index a990c9e..88c4737 100644
--- a/Extensions/EndpointManagerInfo.psm1
+++ b/Extensions/EndpointManagerInfo.psm1
@@ -35,16 +35,29 @@ function Invoke-InitializeModule
Add-ViewObject $global:EMInfoViewObject
Add-ViewItem (New-Object PSObject -Property @{
- Title = "Baseline Templates"
+ Title = "Baseline Templates - Intent"
Id = "BaselineTemplates"
ViewID = "EMInfoGraphAPI"
- API = "/deviceManagement/templates"
+ API = "/deviceManagement/templates"
ShowButtons = @("Export","View")
Permissons=@("DeviceManagementConfiguration.ReadWrite.All")
Icon="EndpointSecurity"
ExpandAssignmentsList = $false
})
+ Add-ViewItem (New-Object PSObject -Property @{
+ Title = "Baseline Templates - Settings Catalog"
+ Id = "BaselineTemplatesSettingsCatalog"
+ ViewID = "EMInfoGraphAPI"
+ API = "/deviceManagement/configurationPolicyTemplates"
+ QUERYLIST = "`$filter=(templateFamily eq 'Baseline')"
+ ShowButtons = @("Export","View")
+ DefaultColumns = "0,displayName=Template Name,displayVersion=Version,lifecycleState=State,baseId=Template Id,id"
+ Permissons=@("DeviceManagementConfiguration.ReadWrite.All")
+ Icon="EndpointSecurity"
+ ExpandAssignmentsList = $false
+ })
+
Add-ViewItem (New-Object PSObject -Property @{
Title = "Android Google Play"
Id = "AndroidGooglePlay"
diff --git a/Extensions/MSALAuthentication.psm1 b/Extensions/MSALAuthentication.psm1
index b9e9c17..5eb049b 100644
--- a/Extensions/MSALAuthentication.psm1
+++ b/Extensions/MSALAuthentication.psm1
@@ -10,7 +10,7 @@ This module manages Authentication for the application with MSAL. It is also res
#>
function Get-ModuleVersion
{
- '3.9.7'
+ '3.9.8a'
}
$global:msalAuthenticator = $null
@@ -119,7 +119,15 @@ function Invoke-InitializeModule
Type = "Boolean"
DefaultValue = $false
Description = "Sort the list of cached accounts based on user name. Updated at restart or account change"
- }) "MSAL"
+ }) "MSAL"
+
+ Add-SettingsObject (New-Object PSObject -Property @{
+ Title = "Sort Tenant List"
+ Key = "SortTenantList"
+ Type = "Boolean"
+ DefaultValue = $false
+ Description = "Sort the list of available tenants based on Tenant name. Updated at restart or account change"
+ }) "MSAL"
Add-MSALPrereq
}
@@ -1804,8 +1812,18 @@ function Get-MSALProfileEllipse
$lbObj = [Windows.Markup.XamlReader]::Parse("Tenants:")
$lbObj.Margin = "0,5,0,0"
+ if((Get-SettingValue "SortTenantList") -eq $true)
+ {
+ $tenants = $script:AccessableTenants | Sort -Property DisplayName
+ }
+ else
+ {
+ $tenants = $script:AccessableTenants
+ }
+
+
Add-GridObject $otherLogins $lbObj
- foreach($tenant in $script:AccessableTenants)
+ foreach($tenant in $tenants)
{
try
{
diff --git a/Extensions/MSGraph.psm1 b/Extensions/MSGraph.psm1
index 1d3fde2..26fe015 100644
--- a/Extensions/MSGraph.psm1
+++ b/Extensions/MSGraph.psm1
@@ -10,7 +10,7 @@ This module manages Microsoft Grap fuctions like calling APIs, managing graph ob
#>
function Get-ModuleVersion
{
- '3.9.6'
+ '3.9.8a'
}
$global:MSGraphGlobalApps = @(
@@ -804,7 +804,7 @@ function Show-GraphObjects
$tableColumns = @()
$additionalColumns = @()
- $additionalColsStr = Get-Setting "EndpointManager\ObjectColumns" "$($global:curObjectType.Id)"
+ $additionalColsStr = ?? (Get-Setting "EndpointManager\ObjectColumns" "$($global:curObjectType.Id)") $global:curObjectType.DefaultColumns
if($additionalColsStr)
{
$additionalColumns += $additionalColsStr.Split(',')
@@ -2635,7 +2635,8 @@ function Add-GraphMigrationInfo
$objType = $objInfo."@odata.type"
if($objType -eq "#microsoft.graph.groupAssignmentTarget" -or
- $objType -eq "#microsoft.graph.exclusionGroupAssignmentTarget")
+ $objType -eq "#microsoft.graph.exclusionGroupAssignmentTarget" -or
+ $objType -eq "#microsoft.graph.cloudPcManagementGroupAssignmentTarget")
{
Add-GraphMigrationObject $objInfo.groupid "/groups" "Group"
}
@@ -4169,7 +4170,7 @@ function local:Add-ObjectColumnInfoClass
function Local:Show-ObjectDefaultColumnsSettings
{
- $strColSettings = Get-Setting "EndpointManager\ObjectColumns" "$($global:curObjectType.Id)"
+ $strColSettings = ?? (Get-Setting "EndpointManager\ObjectColumns" "$($global:curObjectType.Id)") $global:curObjectType.DefaultColumns
$script:colObjectProperties.Clear()
$defaultColumns = (?? $global:curObjectType.ViewProperties (@("displayName","description","id")))
if($strColSettings)
diff --git a/ReleaseNotes.md b/ReleaseNotes.md
index 32dc2df..b800a54 100644
--- a/ReleaseNotes.md
+++ b/ReleaseNotes.md
@@ -1,4 +1,51 @@
# Release Notes
+## 3.9.8 - 2024-09-10
+
+**New features**
+
+- **Intune Info**
+ - Added 'Baseline Templates - Settings Catalog'
+ This list templates for Settings Catalog policies eg. Security Baseline for Windows 10 and later
+
+**Fixes**
+
+- **Import/Export**
+ - Fixed support for export/import App Configurations (Device) - Android between environments
+ Based on [Issue 255](https://github.com/Micke-K/IntuneManagement/issues/255)
+ Thank you @jimmywinberg for all the testing!
+ - Fixed support for export/import App Configurations (Device) - iOS (VPP) between environments
+ Based on [Issue 260](https://github.com/Micke-K/IntuneManagement/issues/260)
+ Thank you @Arne-RFA for all the testing!
+ - Added support for exporting Groups targeted in W365 assignments
+ Based on [Issue 261](https://github.com/Micke-K/IntuneManagement/issues/261)
+- Added tooltip that variables are supported in the Export folder path
+ Based on [Discussions 269](https://github.com/Micke-K/IntuneManagement/discussions/269)
+
+- **Documentation**
+ - App Configuration (Device) documentation updated
+ Added support for value type for Android policies
+ Please continue discussion on the Issue below if this is still not working
+ Based on [Issue 231](https://github.com/Micke-K/IntuneManagement/issues/231)
+ This required some rewriting of the core documentation and an update to all output providers
+ This will make it easier to add additional tables to the documentation in the future
+ - Fixed issue with missing group name when exporting CSV
+ Based on [Issue 274](https://github.com/Micke-K/IntuneManagement/issues/274)
+ - Fixed issue with Authentication Strength when documenting Conditional Access policies
+ - Language files re-generated
+ - ObjectInfo files re-generated. Some Android updates
+ - ObjectCategory file re-generated
+
+- **Compare**
+ - Fixed issue with assignments on exported files when doing a Documentation compare
+ The group name was not resolved from migration table file
+ Based on [Issue 274](https://github.com/Micke-K/IntuneManagement/issues/274)
+
+- **Authentication**
+ - Added setting to allow Sort Tenant List
+ Based on [Issue 265](https://github.com/Micke-K/IntuneManagement/issues/265)
+
+
+
## 3.9.7 - 2024-06-27
**New features**
@@ -29,7 +76,7 @@
- **Documentation**
- App Configuration (Device) documentation updated
- Hopfully add support for Android. Not verified since I don't have one in my test environment
+ Initial support for Android
Please continue discussion on the Issue below if this is still not working
Based on [Issue 231](https://github.com/Micke-K/IntuneManagement/issues/231)
- Added support for documenting MacOS Custom attribute
diff --git a/Xaml/BulkExportForm.xaml b/Xaml/BulkExportForm.xaml
index 1dae5f5..2f191d6 100644
--- a/Xaml/BulkExportForm.xaml
+++ b/Xaml/BulkExportForm.xaml
@@ -21,7 +21,17 @@
-
+
+
+
+ The root folder where exported files will be stored. Supported variables:
+ %Date% Will be replaced by date in format: yyyy-MM-dd
+ %DateTime% Will be replaced by date and time in format: yyyyMMdd-HHmm
+ %Organization% Will be replaced with the Tenant name
+ Any environment variable Replace with the value of the environment variable
+
+
+